Powered by Deep Web Technologies
Note: This page contains sample records for the topic "reflector par lamps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Lamp bulb with integral reflector  

SciTech Connect

An improved electrodeless discharge lamp bulb includes an integral ceramic reflector as a portion of the bulb envelope. The bulb envelope further includes two pieces, a reflector portion or segment is cast quartz ceramic and a light transmissive portion is a clear fused silica. In one embodiment, the cast quartz ceramic segment includes heat sink fins or stubs providing an increased outside surface area to dissipate internal heat. In another embodiment, the quartz ceramic segment includes an outside surface fused to eliminate gas permeation by polishing.

Levin, Izrail (Silver Spring, MD); Shanks, Bruce (Gaithersburg, MD); Sumner, Thomas L. (Wheaton, MD)

2001-01-01T23:59:59.000Z

2

EA-1911: Energy Conservation Standards for Certain Reflector, Elliptical Reflector, and Bulged Reflector Incandescent Lamps  

Energy.gov (U.S. Department of Energy (DOE))

This EA will evaluate the environmental impacts of a proposal to amend energy conservation standards for Certain Reflector, Elliptical Reflector, and Bulged Reflector Incandescent Lamps.

3

Lighting Group: Sources and Ballasts: LED Reflector Lamp  

NLE Websites -- All DOE Office Websites (Extended Search)

LED Reflector Lamp LED Reflector Lamp LED Reflector Lamp Objective LED reflector lamp The goal of this project is to develop a revolutionary new reflector lamp which offers many advantages over current incandescent reflector lamps, including: three times greater efficiency ten times the rated life greater optical and performance properties use of light emitting diodes (LEDs) to generate the light. Although LEDs have been commercially available since the late 1960Â’s, recent dramatic improvements in LED technology have led to white light devices with efficiencies that meet or exceed those of a standard incandescent lamp. This project will build upon these improvements to develop a new type of source for focusing light. Contact Information For more information on this project, please contact:

4

DuraLamp USA: Order (2010-CE-0912)  

Energy.gov (U.S. Department of Energy (DOE))

DOE ordered DuraLamp USA, Inc. to pay a $2,500 civil penalty after finding DuraLamp USA had failed to certify that model PAR 30, an incandescent reflector lamp, complies with the applicable energy conservation standards.

5

Convection venting lensed reflector-type compact fluorescent lamp system  

DOE Patents (OSTI)

Disclosed herein is a fluorescent lamp housing assembly capable of providing convection cooling to the lamp and the ballast. The lens of the present invention includes two distinct portions, a central portion and an apertured portion. The housing assembly further includes apertures so that air mass is able to freely move up through the assembly and out ventilation apertures. 12 figs.

Pelton, B.A.; Siminovitch, M.

1997-07-29T23:59:59.000Z

6

Convection venting lensed reflector-type compact fluorescent lamp system  

SciTech Connect

Disclosed herein is a fluorescent lamp housing assembly capable of providing convection cooling to the lamp and the ballast. The lens of the present invention includes two distinct portions, a central portion and an apertured portion. The housing assembly further includes apertures so that air mass is able to freely move up through the assembly and out ventilation apertures.

Pelton, Bruce A. (825 Manor Rd., El Sobrante, CA 94803); Siminovitch, Michael (829 Manor Rd., El Sobrante, CA 94803)

1997-01-01T23:59:59.000Z

7

Lamp system with conditioned water coolant and diffuse reflector of polytetrafluorethylene(PTFE)  

SciTech Connect

A lamp system with a very soft high-intensity output is provided over a large area by water cooling a long-arc lamp inside a diffuse reflector of polytetrafluorethylene (PTFE) and titanium dioxide (TiO.sub.2) white pigment. The water is kept clean and pure by a one micron particulate filter and an activated charcoal/ultraviolet irradiation system that circulates and de-ionizes and biologically sterilizes the coolant water at all times, even when the long-arc lamp is off.

Zapata, Luis E. (Livermore, CA); Hackel, Lloyd (Livermore, CA)

1999-01-01T23:59:59.000Z

8

Lamp system with conditioned water coolant and diffuse reflector of polytetrafluorethylene(PTFE)  

SciTech Connect

A lamp system with a very soft high-intensity output is provided over a large area by water cooling a long-arc lamp inside a diffuse reflector of polytetrafluorethylene (PTFE) and titanium dioxide (TiO{sub 2}) white pigment. The water is kept clean and pure by a one micron particulate filter and an activated charcoal/ultraviolet irradiation system that circulates and de-ionizes and biologically sterilizes the coolant water at all times, even when the long-arc lamp is off.

Zapata, L.E.; Hackel, L.

1999-10-26T23:59:59.000Z

9

EA-1911: Energy Conservation Standards for Certain Reflector...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1: Energy Conservation Standards for Certain Reflector, Elliptical Reflector, and Bulged Reflector Incandescent Lamps EA-1911: Energy Conservation Standards for Certain Reflector,...

10

DOE CALiPER Program, Report 20.1 Subjective Evaluation of Beam Quality, Shadow Quality, and Color Quality for LED PAR38 Lamps  

Science Conference Proceedings (OSTI)

This report focuses on human-evaluated characteristics, including beam quality, shadow quality, and color quality. Using a questionnaire that included rank ordering, opinions on 27 of the Report 20 PAR38 lamps were gathered during a demonstration event for members of the local Illuminating Engineering Society (IES) chapter. This was not a rigorous scientific experiment, and the data should not be extrapolated beyond the scope of the demonstration. The results suggest that many of the LED products compared favorably to halogen PAR38 benchmarks in all attributes considered. LED lamps using a single-emitter design were generally preferred for their beam quality and shadow quality, and the IES members ranking of color quality did not always match the rank according to the color rendering index (CRI).

Royer, Michael P.; Poplawski, Michael E.; Miller, Naomi J.

2013-10-01T23:59:59.000Z

11

Incandescent Lighting | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

or pear-shaped A-19 lamps Energy-saving or halogen A-19 lamps Reflector or parabolic reflector (PAR) lamps, sometimes called "flood" or "spot" lamps Standard...

12

Discharge lamp with reflective jacket  

DOE Patents (OSTI)

A discharge lamp includes an envelope, a fill which emits light when excited disposed in the envelope, a source of excitation power coupled to the fill to excite the fill and cause the fill to emit light, and a reflector disposed around the envelope and defining an opening, the reflector being configured to reflect some of the light emitted by the fill back into the fill while allowing some light to exit through the opening. The reflector may be made from a material having a similar thermal index of expansion as compared to the envelope and which is closely spaced to the envelope. The envelope material may be quartz and the reflector material may be either silica or alumina. The reflector may be formed as a jacket having a rigid structure which does not adhere to the envelope. The lamp may further include an optical clement spaced from the envelope and configured to reflect an unwanted component of light which exited the envelope back into the envelope through the opening in the reflector. Light which can be beneficially recaptured includes selected wavelength regions, a selected polarization, and selected angular components.

MacLennan, Donald A. (Gaithersburg, MD); Turner, Brian P. (Damascus, MD); Kipling, Kent (Gaithersburg, MD)

2001-01-01T23:59:59.000Z

13

Lamp system for uniform semiconductor wafer heating  

SciTech Connect

A lamp system with a very soft high-intensity output is provided over a large area by water cooling a long-arc lamp inside a diffuse reflector of polytetrafluorethylene (PTFE) and titanium dioxide (TiO.sub.2) white pigment. The water is kept clean and pure by a one micron particulate filter and an activated charcoal/ultraviolet irradiation system that circulates and de-ionizes and biologically sterilizes the coolant water at all times, even when the long-arc lamp is off.

Zapata, Luis E. (Livermore, CA); Hackel, Lloyd (Livermore, CA)

2001-01-01T23:59:59.000Z

14

One piece microwave container screens for electrodeless lamps  

DOE Patents (OSTI)

A microwave powered electrodeless lamp includes an improved screen unit having mesh and solid sections with an internal reflector to reflect light into a light-transmitting chamber defined in the lamp microwave cavity by the reflector and the mesh section. A discharge envelope of a bulb is disposed in the light-transmitting chamber. Light emitted from the envelope is prevented by the reflector from entering the cavity portion bounded by the solid section of the screen. Replacing mesh material by solid metal material as part of the screen unit significantly reduces leakage of microwave energy from the lamp. The solid section has multiple compliant fingers defined therein for engaging the periphery of a flange on the waveguide unit so that a hose clamp can easily secure the screen to the assembly. Screen units of this type having different mesh section configurations can be interchanged in the lamp assembly to produce different respective illumination patterns.

Turner, Brian (Myersville, MD); Ury, Michael (Bethesda, MD)

1998-01-01T23:59:59.000Z

15

Aperture lamp  

DOE Patents (OSTI)

A discharge lamp includes means for containing a light emitting fill, the fill being capable of absorbing light at one wavelength and re-emitting the light at a different wavelength, the light emitted from the fill having a first spectral power distribution in the absence of reflection of light back into the fill; means for exciting the fill to cause the fill to emit light; and means for reflecting some of the light emitted by the fill back into the fill while allowing some light to exit, the exiting light having a second spectral power distribution with proportionately more light in the visible region as compared to the first spectral power distribution, wherein the light re-emitted by the fill is shifted in wavelength with respect to the absorbed light and the magnitude of the shift is in relation to an effective optical path length. Another discharge lamp includes an envelope; a fill which emits light when excited disposed in the envelope; a source of excitation power coupled to the fill to excite the fill and cause the fill to emit light; and a reflective ceramic structure disposed around the envelope and defining an light emitting opening, wherein the structure comprises a sintered body built up directly on the envelope and made from a combination of alumina and silica.

MacLennan, Donald A. (Gaithersburg, MD); Turner, Brian P. (Damascus, MD)

2003-01-01T23:59:59.000Z

16

Lamp Divisions  

Office of Legacy Management (LM)

--- --- /A;; i :' r%i;in~house ilEc;' i:Z3:~cra:ion Lamp Divisions , _.. (I +i. 0 :,,,rg. . I . . -= i?e p/q! qe)-' &se pw E.rcale?l iev, Je!sey 07m March 20, 1 gs? ::r . J. A. Jones I ti. 5. Muclear Regulatory Commission .> = ..- haterials Licensing Branch -s - ,.I, - - Division of Fuel Cycle and hateri al Safety LY. , $2 - _ . ' -' . 3 _- - Yeshington, C. C. 2@555 - :_ :--, =-- -- .-?J -.: y...., : :- 7 Dear Mr. Jones : y-- --, ? . *I 2=15 2 r; X -P The following is our final report of the decontamination efZor?s takz in our Bui Iding 7 basement and wi 11 also serve to update our report i& November 12, 1980. As stated in NRC' s report of December 22, 1983, two closeout inspect ions were conducted by your King of Prussia off i ce on November 21 and December 2,

17

LED lamp  

SciTech Connect

There is herein described a lamp for providing white light comprising a plurality of light sources positioned on a substrate. Each of said light sources comprises a blue light emitting diode (LED) and a dome that substantially covers said LED. A first portion of said blue light from said LEDs is transmitted through said domes and a second portion of said blue light is converted into a red light by a first phosphor contained in said domes. A cover is disposed over all of said light sources that transmits at least a portion of said red and blue light emitted by said light sources. The cover contains a second phosphor that emits a yellow light in response to said blue light. The red, blue and yellow light combining to form the white light and the white light having a color rendering index (CRI) of at least about 80.

Galvez, Miguel; Grossman, Kenneth; Betts, David

2013-11-12T23:59:59.000Z

18

Compact Fluorescent Lamps  

Science Conference Proceedings (OSTI)

Electric lighting constitutes approximately 21-23 % of the electric grid load in the United States. The higher energy and maintenance costs of incandescent lamps, combined with the favorable economics of high-efficiency compact fluorescent lamps (CFLs), are making CFLs the increasingly popular choice for both residential and commercial lighting. Utility incentive and rebate programs to stimulate CFL use and the beginnings of a ban on incandescent lamps are enhancing CFL penetration levels in these enviro...

2009-12-17T23:59:59.000Z

19

Nuclear reactor reflector  

DOE Patents (OSTI)

A nuclear reactor reflector is disclosed that comprises a stack of reflector blocks with vertical water flow passages to cool the reflector. The interface between blocks is opposite support points for reactor fuel rods. Water flows between the reflector and the reactor barrel from passages in a bottom block. The top block contains a flange to limit this flow and the flange has a slot to receive an alignment pin that is welded to the barrel. The pin is held in the slot by two removable shims. Alignment bars extend the length of the stack in slots machined in each block when the stack is assembled.

Hopkins, Ronald J. (Pensacola, FL); Land, John T. (Pensacola, FL); Misvel, Michael C. (Pensacola, FL)

1994-01-01T23:59:59.000Z

20

Nuclear reactor reflector  

DOE Patents (OSTI)

A nuclear reactor reflector is disclosed that comprises a stack of reflector blocks with vertical water flow passages to cool the reflector. The interface between blocks is opposite support points for reactor fuel rods. Water flows between the reflector and the reactor barrel from passages in a bottom block. The top block contains a flange to limit this flow and the flange has a slot to receive an alignment pin that is welded to the barrel. The pin is held in the slot by two removable shims. Alignment bars extend the length of the stack in slots machined in each block when the stack is assembled. 12 figs.

Hopkins, R.J.; Land, J.T.; Misvel, M.C.

1994-06-07T23:59:59.000Z

Note: This page contains sample records for the topic "reflector par lamps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Jacketed lamp bulb envelope  

DOE Patents (OSTI)

A jacketed lamp bulb envelope includes a ceramic cup having an open end and a partially closed end, the partially closed end defining an aperture, a lamp bulb positioned inside the ceramic cup abutting the aperture, and a reflective ceramic material at least partially covering a portion of the bulb not abutting the aperture. The reflective ceramic material may substantially fill an interior volume of the ceramic cup not occupied by the bulb. The ceramic cup may include a structural feature for aiding in alignment of the jacketed lamp bulb envelope in a lamp. The ceramic cup may include an external flange about a periphery thereof. One example of a jacketed lamp bulb envelope includes a ceramic cup having an open end and a closed end, a ceramic washer covering the open end of the ceramic cup, the washer defining an aperture therethrough, a lamp bulb positioned inside the ceramic cup abutting the aperture, and a reflective ceramic material filling an interior volume of the ceramic cup not occupied by the bulb. A method of packing a jacketed lamp bulb envelope of the type comprising a ceramic cup with a lamp bulb disposed therein includes the steps of filling the ceramic cup with a flowable slurry of reflective material, and applying centrifugal force to the cup to pack the reflective material therein.

MacLennan, Donald A. (Gaithersburg, MD); Turner, Brian P. (Damascus, MD); Gitsevich, Aleksandr (Gaithersburg, MD); Bass, Gary K. (Mt. Airy, MD); Dolan, James T. (Frederick, MD); Kipling, Kent (Gaithersburg, MD); Kirkpatrick, Douglas A. (Great Falls, VA); Leng, Yongzhang (Damascus, MD); Levin, Izrail (Silver Spring, MD); Roy, Robert J. (Frederick, MD); Shanks, Bruce (Gaithersburg, MD); Smith, Malcolm (Alexandria, VA); Trimble, William C. (Columbia, MD); Tsai, Peter (Olney, MD)

2001-01-01T23:59:59.000Z

22

Highly Efficient Small Form Factor LED Retrofit Lamp  

SciTech Connect

This report summarizes work to develop a high efficiency LED-based MR16 lamp downlight at OSRAM SYLVANIA under US Department of Energy contract DE-EE0000611. A new multichip LED package, electronic driver, and reflector optic were developed for these lamps. At steady-state, the lamp luminous flux was 409 lumens (lm), luminous efficacy of 87 lumens per watt (LPW), CRI (Ra) of 87, and R9 of 85 at a correlated color temperature (CCT) of 3285K. The LED alone achieved 120 lumens per watt efficacy and 600 lumen flux output at 25 C. The driver had 90% electrical conversion efficiency while maintaining excellent power quality with power factor >0.90 at a power of only 5 watts. Compared to similar existing MR16 lamps using LED sources, these lamps had much higher efficacy and color quality. The objective of this work was to demonstrate a LED-based MR16 retrofit lamp for replacement of 35W halogen MR16 lamps having (1) luminous flux of 500 lumens, (2) luminous efficacy of 100 lumens per watt, (3) beam angle less than 40{sup o} and center beam candlepower of at least 1000 candelas, and (4) excellent color quality.

Steven Allen; Fred Palmer; Ming Li

2011-09-11T23:59:59.000Z

23

Fluorescent lamp ballast  

SciTech Connect

An electronic ballast is described having at least a first and second terminal for engaging the filaments of at least one fluorescent lamp which requires a breakdown voltage to ignite the lamp and a maintaining voltage for maintaining ionization therewithin, the electronic ballast comprising: a direct current voltage source; a transistor; a transformer having a primary winding separated into a first winding, a second winding, a third winding, and a fourth winding; the first winding connected between the voltage source and the first terminal; the second winding connected between the two terminals; the third winding connected between the second terminal and to both the transistor and to ground; the fourth winding connected between ground and the transistor; the lamp being parallel to the second winding when the lamp filaments engages the ballast terminals.

Ureche, A.

1987-08-25T23:59:59.000Z

24

Magnetic fluorescent lamp  

DOE Patents (OSTI)

The radiant emission of a mercury-argon discharge in a fluorescent lamp assembly is enhanced by providing means for establishing a magnetic field with lines of force along the path of electron flow through the bulb of the lamp assembly, to provide Zeeman splitting of the ultraviolet spectral line. Optimum results are obtained when the magnetic field strength causes a Zeeman splitting of approximately 1.7 times the thermal line width.

Berman, S.M.; Richardson R.W.

1983-12-29T23:59:59.000Z

25

Electronic Compact Fluorescent Lamps  

Science Conference Proceedings (OSTI)

This EPRI Technical Update addresses the fastest growing energy efficient light source the electronic compact fluorescent lamp (CFL). Business and technical market factors (Chapter 2) explain the past and future growth of the CFL market while emphasizing future technical improvements along with discussion of the importance of utility involvement in helping their customers make the switch from incandescent lamps to CFLs. The basic CFL technology is covered in Chapter 3 including test results for selected ...

2007-12-18T23:59:59.000Z

26

The Sandia Wave Reflector  

The Sandia wave reflector is a magnetic conductor for wireless transmissions near 433 MHz. The device reflects perpendicular electromagnetic waves in-phase and suppresses surface waves resulting in improved gain performance and effective operation ...

27

Method and apparatus for mounting a dichroic mirror in a microwave powered lamp assembly using deformable tabs  

DOE Patents (OSTI)

A microwave powered electrodeless lamp includes an improved screen unit having mesh and solid sections with an internal reflector secured at the juncture of the two sections to reflect light into a light-transmitting chamber defined in the lamp microwave cavity by the reflector and the mesh section. A discharge envelope of a bulb is disposed in the light-transmitting chamber. Light emitted from the envelope is prevented by the reflector from entering the cavity portion bounded by the solid section of the screen. The reflector is mounted in the cavity by tabs formed in the screen unit and bendable into the cavity to define support planes abutting respective surfaces of the reflector. The mesh section and tabs are preferably formed by etching a thin metal sheet. 7 figs.

Ury, M.; Sowers, F.; Harper, C.; Love, W.

1998-11-24T23:59:59.000Z

28

Method and apparatus for mounting a dichroic mirror in a microwave powered lamp assembly using deformable tabs  

DOE Patents (OSTI)

A microwave powered electrodeless lamp includes an improved screen unit having mesh and solid sections with an internal reflector secured at the juncture of the two sections to reflect light into a light-transmitting chamber defined in the lamp microwave cavity by the reflector and the mesh section. A discharge envelope of a bulb is disposed in the light-transmitting chamber. Light emitted from the envelope is prevented by the reflector from entering the cavity portion bounded by the solid section of the screen. The reflector is mounted in the cavity by tabs formed in the screen unit and bendable into the cavity to define support planes abutting respective surfaces of the reflector. The mesh section and tabs are preferably formed by etching a thin metal sheet.

Ury, Michael (Bethesda, MD); Sowers, Frank (Frederick, MD); Harper, Curt (Wheaton, MD); Love, Wayne (Olney, MD)

1998-01-01T23:59:59.000Z

29

Fluorescent lamp ballast  

SciTech Connect

This patent describes an electronic ballast unit for a fluorescent lamp comprising: a circuit assembly having a pair of voltage input terminal and a first inductor and a capacitor in series relationship with each other to form a series resonant circuit. The circuit is adapted to be coupled to a fluorescent lamp to provide a starting voltage for the lamp; and a second inductor connected in shunt relationship to the first inductor and connected to the other input terminal. There is a core on which the first inductor and the second inductor are mounted. The core inductively couples the inductors with each other and are shaped to reduce core losses to minimize the increase of temperature of the core; the core is of a generally H-shaped configuration, and means of opposite ends of the H-shaped core to complete the magnetic flux path for each inductor, respectively.

Boyd, G.D.

1987-03-31T23:59:59.000Z

30

PARS II  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

too rapidly to see): a. Loading -PARS II is loading the report definition and data query. b. Downloading (generating report) c. Opening Excel d. Formatting report Report...

31

2X Incandescent Lamp Technology  

Science Conference Proceedings (OSTI)

The incandescent lamp was developed during the 1800s, largely reaching the design of the traditional incandescent lamp as we know it by the late 1800s. This lamp remained largely unchanged for years, providing most commercial and residential lighting demands into the 1950s and residential lighting into the 2000s. As new lighting technologies became available, the low efficacy, measured in lumens per watt, of the traditional incandescent lamp became an issue which many wanted to ...

2012-11-01T23:59:59.000Z

32

Corrosion protection for silver reflectors  

DOE Patents (OSTI)

A method of protecting silver reflectors from damage caused by contact with gaseous substances which are often present in the atmosphere and a silver reflector which is so protected. The inventive method comprises at least partially coating a reflector with a metal oxide such as aluminum oxide to a thickness of 15 {angstrom} or less. 6 figs.

Arendt, P.N., Scott, M.L.

1989-10-04T23:59:59.000Z

33

Corrosion protection for silver reflectors  

SciTech Connect

A method of protecting silver reflectors from damage caused by contact with gaseous substances which are often present in the atmosphere and a silver reflector which is so protected. The inventive method comprises at least partially coating a reflector with a metal oxide such as aluminum oxide to a thickness of 15 .ANG. or less.

Arendt, Paul N. (Los Alamos, NM); Scott, Marion L. (Los Alamos, NM)

1991-12-31T23:59:59.000Z

34

Fluorescent lamp dimming adaptor kit  

SciTech Connect

An add-on fluorescent lamp dimming adaptor is described for connecting to a conventional nondimming ballast in a fluorescent lighting system, the system including a source of ac voltage. The ballast has terminals for connecting to a fluorescent lamp, the adaptor comprising: a switching module adapted to be coupled to the terminals for switching current from the lamp, the switching module being connected in parallel with the lamp to divert current from the lamp when the switching module conducts; and a level control coupled to the switching module, the level control controlling the conductive state of the switching module to vary the current in the lamp according to a dimming control signal supplied to the level control, the level control causing the switching module to switch at a frequency in the range of 300 hertz and higher during times that the lamp current is being varied.

Alley, R.P.

1987-07-21T23:59:59.000Z

35

PARS II  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Peck 1.1 5102010 Exercise 6 -Monthly Status screen updated to PARS II 4152010 Version 30-31 Replaced screens and changed text. J. Peck 1.1 5102010 Ex 8 and 9 36-38...

36

Demonstration of LED Retrofit Lamps at the Jordan Schnitzer Museum of Art  

SciTech Connect

The Jordan Schnitzer Museum of Art in Eugene, Oregon, houses a remarkable permanent collection of Asian art and antiquities, modern art, and sculpture, and also hosts traveling exhibitions. In the winter and spring of 2011, a series of digital photographs by artist Chris Jordan, titled "Running the Numbers," was exhibited in the Coeta and Donald Barker Special Exhibitions Gallery. These works graphically illustrate waste (energy, money, health, consumer objects, etc.) in contemporary culture. The Bonneville Power Administration and the Eugene Water and Electricity Board provided a set of Cree 12W light-emitting diode (LED) PAR38 replacement lamps (Cree LRP38) for the museum to test for accent lighting in lieu of their standard Sylvania 90W PAR38 130V Narrow Flood lamps (which draw 78.9W at 120V). At the same time, the museum tested LED replacement lamps from three other manufacturers, and chose the Cree lamp as the most versatile and most appropriate color product for this exhibit. The lamps were installed for the opening of the show in January 2011. This report describes the process for the demonstration, the energy and economic results, and results of a survey of the museum staff and gallery visitors on four similar clusters of art lighted separately by four PAR38 lamps.

Miller, Naomi J.

2011-09-01T23:59:59.000Z

37

Sulfur Lamps-The Next Generation of Efficient Light?  

NLE Websites -- All DOE Office Websites (Extended Search)

5 5 Sulfur Lamps-The Next Generation of Efficient Light? The figure above is a schematic of the system installed at the National Air and Space Museum and the DOE headquarters in Washington, D.C., Light from the sulfur lamp is focused by a parabolic reflector so that it enters the light pipe within a small angular cone. Light travels down the pipe, reflecting off the prismatic film (A) that lines the outer acrylic tube. The prismatic film reflects the light through total internal reflection (C), an intrinsically efficient process. Some of the light striking the film (at A) is not reflected and "leaks out" of the pipe walls (B), giving the pipe a glowing appearance. A light ray that travels all the way down the pipe will strike the mirror at the end (D) and return back up the pipe.

38

Flash Lighting with Fluorescent Lamp.  

E-Print Network (OSTI)

??A flash lighting circuit with the fluorescent lamp is designed to produce lighting flicker by means of controlling the operating frequency and the duty-ratio of… (more)

Hsieh, Horng

2005-01-01T23:59:59.000Z

39

Fixture conditions affect lamp performance  

SciTech Connect

This article discusses the major parameters that affect fluorescent lamp performance under fixture conditions. These parameters include fixture type, and HVAC integration, which directly determine the minimum lamp wall temperature (MLWT), and therefore, the resulting light output of the lamp/ballast system. Experimental data is presented showing that the lumen output of the lamp/ballast system can vary by as much as 20% and that the system efficacy can vary by 10% depending upon the type of fixture and HVAC system employed. 4 refs., 5 figs., 1 tab.

Siminovitch, M.J.; Rubinstein, F.M.; Verderber, R.R.

1986-11-01T23:59:59.000Z

40

Inductive tuners for microwave driven discharge lamps  

DOE Patents (OSTI)

An RF powered electrodeless lamp utilizing an inductive tuner in the waveguide which couples the RF power to the lamp cavity, for reducing reflected RF power and causing the lamp to operate efficiently.

Simpson, James E. (Gaithersburg, MD)

1999-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "reflector par lamps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Information Resources: LED Replacement Lamps: Current Performance...  

NLE Websites -- All DOE Office Websites (Extended Search)

incandescent lamps (e.g., A-lamps), and provided an update on ENERGY STAR criteria for LED integral replacement lamps - currently in its second draft. Robert Lingard of Pacific...

42

A projective LED dental lamp design.  

E-Print Network (OSTI)

??Halogen lamps are mostly applied as a light source to the traditional lamp for medical treatment due to its proper color temperature, but it has… (more)

Chung, Yu-Lin

2011-01-01T23:59:59.000Z

43

Lamp method and apparatus using multiple reflections  

DOE Patents (OSTI)

An electrodeless microwave discharge lamp includes an envelope with a discharge forming fill disposed therein which emits light, the fill being capable of absorbing light at one wavelength and re-emitting the absorbed light at a different wavelength, the light emitted from the fill having a first spectral power distribution in the absence of reflection of light back into the fill, a source of microwave energy coupled to the fill to excite the fill and cause the fill to emit light, and a reflector disposed within the microwave cavity and configured to reflect at least some of the light emitted by the fill back into the fill while allowing some light to exit, the exiting light having a second spectral power distribution with proportionately more light in the visible region as compared to the first spectral power distribution, wherein the light re-emitted by the fill is shifted in wavelength with respect to the absorbed light and the magnitude of the shift is in relation to an effective optical path length.

MacLennan, Donald A. (Gaithersburg, MD); Turner, Brian P. (Damascus, MD)

2001-01-01T23:59:59.000Z

44

Reflector system for a lighting fixture  

DOE Patents (OSTI)

Disclosed herein is a reflector system for a lighting fixture having a illumination source surrounded by an envelope. The reflector system includes a first reflector surrounding the illumination source. The reflector system also includes a second reflector which is non-contiguous with the first reflector and which surrounds the illumination source. The illumination source creates light rays which are reflected by the first and second reflectors. The first reflector directs light rays toward the center line of the fixture. However, the reflected rays despite being so reflected do not substantially intersect the envelope. The reflected light rays from the second reflector being directed so that they diverge from the center line of the fixture avoiding intersection with the semi-transparent envelope. 5 figs.

Siminovitch, M.J.; Page, E.; Gould, C.T.

1998-09-08T23:59:59.000Z

45

Reflector system for a lighting fixture  

DOE Patents (OSTI)

Disclosed herein is a reflector system for a lighting fixture having a illumination source surrounded by an envelope. The reflector system includes a first reflector surrounding the illumination source. The reflector system also includes a second reflector which is non-contiguous with the first reflector and which surrounds the illumination source. The illumination source creates light rays which are reflected by the first and second reflectors. The first reflector directs light rays toward the center line of the fixture. However, the reflected rays despite being so reflected do not substantially intersect the envelope. The reflected light rays from the second reflector being directed so that they diverge from the center line of the fixture avoiding intersection with the semi-transparent envelope.

Siminovitch, Michael J. (829 Manor Rd., El Sobrante, CA 94803); Page, Erik (Berkeley, CA); Gould, Carl T. (Medford, OR)

2001-01-01T23:59:59.000Z

46

Reflector system for a lighting fixture  

DOE Patents (OSTI)

Disclosed herein is a reflector system for a lighting fixture having a illumination source surrounded by an envelope. The reflector system includes a first reflector surrounding the illumination source. The reflector system also includes a second reflector which is non-contiguous with the first reflector and which surrounds the illumination source. The illumination source creates light rays which are reflected by the first and second reflectors. The first reflector directs light rays toward the center line of the fixture. However, the reflected rays despite being so reflected do not substantially intersect the envelope. The reflected light rays from the second reflector being directed so that they diverge from the center line of the fixture avoiding intersection with the semi-transparent envelope.

Siminovitch, Michael J. (El Sobrante, CA); Page, Erik (Berkeley, CA); Gould, Carl T. (Medford, OR)

1998-01-01T23:59:59.000Z

47

L-Prize Competition Winner 60W Incandescent Replacement Lamp Update  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Interagency Technology Deployment Working Group L Prize ® Competition Winner 60W Incandescent Replacement Lamp Update James E. Rannels, Senior Advisor L Prize Competition D&R International March 15, 2012 Cost of electricity 1 cent per kilowatt-hour The Washington Post, March 8, 2012 Page One 2 Cost of electricity 11 cents per kilowatt-hour The Washington Post, March 9, 2012 Page Two 3 What Is the L Prize? * Technology competition to spur innovation and exceptional performance * Created by Energy Independence and Security Act (EISA 2007) Sec. 655 * Two key lamp replacements: 60W Incandescent and PAR 38 Halogen * Future focus: 21 st Century Lamp * Cash prizes, federal purchasing, utility programs 4 Philips Wins First L Prize * August 3, 2011: Philips

48

L-Prize Competition Winner 60W Incandescent Replacement Lamp Update  

NLE Websites -- All DOE Office Websites (Extended Search)

Interagency Technology Deployment Working Group L Prize ® Competition Winner 60W Incandescent Replacement Lamp Update James E. Rannels, Senior Advisor L Prize Competition D&R International March 15, 2012 Cost of electricity 1 cent per kilowatt-hour The Washington Post, March 8, 2012 Page One 2 Cost of electricity 11 cents per kilowatt-hour The Washington Post, March 9, 2012 Page Two 3 What Is the L Prize? * Technology competition to spur innovation and exceptional performance * Created by Energy Independence and Security Act (EISA 2007) Sec. 655 * Two key lamp replacements: 60W Incandescent and PAR 38 Halogen * Future focus: 21 st Century Lamp * Cash prizes, federal purchasing, utility programs 4 Philips Wins First L Prize * August 3, 2011: Philips

49

Development and Testing of Solar Reflectors  

DOE Green Energy (OSTI)

To make concentrating solar power technologies more cost competitive, it is necessary to develop advanced reflector materials that are low in cost and maintain high reflectance for extended lifetimes under severe outdoor environments. The Advanced Materials Team performs durability testing of candidate solar reflectors at outdoor test sites and in accelerated weathering chambers. Several materials being developed by industry have been submitted for evaluation. These include silvered glass mirrors, aluminized reflectors, and front-surface mirrors. In addition to industry-supplied materials, NREL is funding the development of new, innovative reflectors, including a new commercial laminate reflector and an advanced solar reflective mirror (ASRM). To help commercialize the ASRM, a cost analysis was performed; it shows the total production cost could meet the goal. The development, performance, and durability of these candidate solar reflectors and cost analysis results will be described.

Kennedy, C.; Terwilliger, K.; Milbourne, M.

2005-01-01T23:59:59.000Z

50

DOE Requires Manufacturer and Labeler to Cease Sale of Incandescent Reflector Lamps  

Energy.gov (U.S. Department of Energy (DOE))

DOE has issued Notices of Non-Compliance Determination to Westinghouse Lighting Corporation and Fuzhou Sunlight Lighting Electrical Appliance Company requiring that they halt the sale of 8 basic...

51

Energy saving controller for fluorescent lamps.  

E-Print Network (OSTI)

??Although fluorescent lamp is a very efficient lighting device in daily life, still the high harmonic distortion and low power factor cause unnecessary energy consumption.… (more)

Cheong, Zhi Xiong

2010-01-01T23:59:59.000Z

52

PARS II TRAINING  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

10 (V1.1) PARS II 102 Monthly Updating and Reporting i 10 (V1.1) PARS II 102 Monthly Updating and Reporting i Project Assessment and Reporting System PARS II 102 Monthly Updating and Reporting Training Workbook (PARS II Release 1.1) Department of Energy September 13, 2010 September 13,, 2010 (V1.1) PARS II 102 Monthly Updating and Reporting ii Table of Contents OVERSIGHT and ASSESSMENT ........................................................................................................ 1 Exercise 1: Find and View a Project ............................................................................................ 1 Sort the Project List ................................................................................................................. 3

53

Portable lamp with dynamically controlled lighting distribution  

DOE Patents (OSTI)

A double lamp table or floor lamp lighting system has a pair of compact fluorescent lamps (CFLs) arranged vertically with a reflective septum in between. By selectively turning on one or both of the CFLs, down lighting, up lighting, or both up and down lighting is produced. The control system can also vary the light intensity from each CFL. The reflective septum insures that almost all the light produced by each lamp will be directed into the desired light distribution pattern which is selected and easily changed by the user. Planar compact fluorescent lamps, e.g. circular CFLs, particularly oriented horizontally, are preferable. CFLs provide energy efficiency. The lighting system may be designed for the home, hospitality, office or other environments.

Siminovitch, Michael J. (Pinole, CA); Page, Erik R. (Berkeley, CA)

2001-01-01T23:59:59.000Z

54

Solid-state lamp with integral occupancy sensor  

E-Print Network (OSTI)

Previous work demonstrated a retrofit proximity detector for fluorescent lamps using the lamp's own stray electric fields. This paper extends the retrofit sensor system to a solid-state (LED) lamp. The design and implementation ...

Cooley, John J.

55

PARS II Extraction Utility | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Extraction Utility PARS II Extraction Utility PARS II Extraction Utility v8020130510.zip More Documents & Publications PARS II Extraction Utility Release Notes PARS II CPP...

56

Compact Fluorescent Lamps : Technologies : From the Lab to the...  

NLE Websites -- All DOE Office Websites (Extended Search)

process. (Left) Compact Fluorescent Lamp; (Right) Cover of the 'Lighting Retrofit Workbook' (Left) Compact Fluorescent Lamp (CFL) (Right) Retrofitting national parks...

57

Driver Circuit for White LED Lamps with TRIAC Dimming Control.  

E-Print Network (OSTI)

??An efficient Light Emitting Diode (LED) lamp driver circuit is proposed for retrofitting the conventionally used incandescent lamps with existing TRIAC dimmer. The dimming feature… (more)

Weng, Szu-Jung

2012-01-01T23:59:59.000Z

58

Tailored edge-ray reflectors for illumination  

SciTech Connect

The edge-ray principle can be used to tailor a reflector. However, one set of edge rays already fully determines the reflector profile. We present a design method for tailoring compact compound elliptical concentrator (CEC)-type reflectors to a given source and a desired angular power distribution. Two reflected images of the source, one on each side of the source, contribute together with the direct radiation from the source to produce the desired power distribution. We determine the reflector profile by numerically solving a differential equation. No optimization is required. Beyond the angular region in which the power distribution can be strictly controlled, the power drops to zero in a finite decay range. This decay range becomes narrower as the reflector increases in size. We show a reflector for producing a strictly constant irradiance from [minus] 43 to 43 deg from a cylindrical source of constant brightness. The reflector extends to a maximum distance of 8 source diameters. No power is radiated beyond [plus minus] 50 deg.

Ries, H.R.; Winston, R. (Enrico Fermi Institute and Department of Physics, The University of Chicago, Chicago, Illinois 60637 (United States))

1994-04-01T23:59:59.000Z

59

PARS II FAQ  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

V1.4.1 (June 25, 2011) 1 V1.4.1 (June 25, 2011) 1 PARS II Project Assessment and Reporting System Frequently Asked Questions (Click on a Question to go to Its Answer) General PARS II Project Information Q: What is the motivation, purpose and expected benefit from the PARS II system? Q: Where can I go to find out information on PARS II? Accessing and Using PARS II Q: Where can I go to access PARS II? Q: How do I obtain a PARS II User ID and Password? Q: PARS II will not allow me to log-in, it just keeps displaying the login window for User ID and Password. What should I do? Q: Upon log-in, I do not see a list of my projects. What should I do? Q: I am a FPD tracking a project and it does not appear on my project list. What should I do? Q: Upon log-in, I receive a white screen. What should I do?

60

PARS II Training Schedule  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 4 5 6 7 8 WEEK 3 11 12 13 14 15 WEEK 4 18 19 20 21 22 WEEK 5 25 26 27 28 PARS II Training Schedule FEBRUARY 2013 Webinar PARS 102: Session A) 10:00 - 12:00 1 Hour Break...

Note: This page contains sample records for the topic "reflector par lamps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Distributed Bragg Reflectors With Reduced Optical Absorption  

DOE Patents (OSTI)

A new class of distributed Bragg reflectors has been developed. These distributed Bragg reflectors comprise interlayers positioned between sets of high-index and low-index quarter-wave plates. The presence of these interlayers is to reduce photon absorption resulting from spatially indirect photon-assisted electronic transitions between the high-index and low-index quarter wave plates. The distributed Bragg reflectors have applications for use in vertical-cavity surface-emitting lasers for use at 1.55 .mu.m and at other wavelengths of interest.

Klem, John F. (Albuquerque, NM)

2005-08-16T23:59:59.000Z

62

LED lamp power management system and method  

DOE Patents (OSTI)

An LED lamp power management system and method including an LED lamp having an LED controller 58; a plurality of LED channels 60 operably connected to the LED controller 58, each of the plurality of LED channels 60 having a channel switch 62 in series with at least one shunted LED circuit 83, the shunted LED circuit 83 having a shunt switch 68 in parallel with an LED source 80. The LED controller 58 reduces power loss in one of the channel switch 62 and the shunt switch 68 when LED lamp electronics power loss (P.sub.loss) exceeds an LED lamp electronics power loss limit (P.sub.lim); and each of the channel switches 62 receives a channel switch control signal 63 from the LED controller 58 and each of the shunt switches 68 receives a shunt switch control signal 69 from the LED controller 58.

Gaines, James; Clauberg, Bernd; Van Erp, Josephus A. M.

2013-03-19T23:59:59.000Z

63

A Review of the Reflector Compact Fluorescent Lights Technology Procurement Program: Conclusions and Results  

SciTech Connect

This report describes a project sponsored by the U.S. Department of Energy (DOE) and implemented by the Pacific Northwest National Laboratory (PNNL), from 2000 to 2007 to improve the performance of reflector type (R-lamp) compact fluorescent lamps (CFLs) and increase their availability throughout the United States by means of a technology development and procurement strategy. In 2000, at the request of the U.S. Department of Energy’s Emerging Technologies Program and its predecessors, the Pacific Northwest National Laboratory undertook a technology procurement seeking R-CFLs that were specifically designed for use in ICAT recessed can fixtures and that met other minimum performance criteria including minimum light output and size restrictions (to ensure they fit in standard residential recessed cans). The technology procurement included two phases. In Phase I, requests for proposals (RFPs) were issued in October 2002 and five manufacturers responded with 12 lamp models. Eight of these models met the minimum requirements and passed the 6-hour short-term test in a simulated ICAT environment. These eight models were subjected to long-term tests of 6,000 or more hours in a simulated ICAT environment. Three of these models passed the short- and long-term tests and were promoted through the program website (www.pnl.gov/rlamps), press releases, and fliers. To increase the number of qualifying models, a second RFP was issued in June 2005. In April 2007, DOE announced that 16 reflector CFL (R-CFL) models by four manufacturers had met all the minimum requirements of Phase 2 of the R-CFL Technology Innovation Competition. PNNL developed both the criteria and the test apparatus design for Elevated Temperature Life Testing (ETLT), which has been included by DOE in its draft ENERGY STAR specifications for the reflector category of CFLs. PNNL promoted the winning lamps through a program website, press releases, and fliers as well as through program partners. PNNL also helped engage distributors including Costco, the Home Depot, Bonneville Power Administration, and utility organizations.

Sandahl, Linda J.; Gilbride, Theresa L.; Ledbetter, Marc R.; McCullough, Jeffrey J.

2008-05-19T23:59:59.000Z

64

High frequency inductive lamp and power oscillator  

DOE Patents (OSTI)

A high frequency inductively coupled electrodeless lamp includes an excitation coil with an effective electrical length which is less than one half wavelength of a driving frequency applied thereto, preferably much less. The driving frequency may be greater than 100 MHz and is preferably as high as 915 MHz. Preferably, the excitation coil is configured as a non-helical, semi-cylindrical conductive surface having less than one turn, in the general shape of a wedding ring. At high frequencies, the current in the coil forms two loops which are spaced apart and parallel to each other. Configured appropriately, the coil approximates a Helmholtz configuration. The lamp preferably utilizes an bulb encased in a reflective ceramic cup with a pre-formed aperture defined therethrough. The ceramic cup may include structural features to aid in alignment and/or a flanged face to aid in thermal management. The lamp head is preferably an integrated lamp head comprising a metal matrix composite surrounding an insulating ceramic with the excitation integrally formed on the ceramic. A novel solid-state oscillator preferably provides RF power to the lamp. The oscillator is a single active element device capable of providing over 70 watts of power at over 70% efficiency. Various control circuits may be employed to match the driving frequency of the oscillator to a plurality of tuning states of the lamp.

MacLennan, Donald A. (Gaithersburg, MD); Turner, Brian P. (Damascus, MD); Dolan, James T. (Frederick, MD); Kirkpatrick, Douglas A. (Great Falls, VA); Leng, Yongzhang (Damascus, MD)

2000-01-01T23:59:59.000Z

65

Long-Term Performance of Screwbase Compact Fluorescent Lamps  

Science Conference Proceedings (OSTI)

The packaging material for compact fluorescent lamps normally includes some claim regarding expected lamp lifetime. This claimed lifetime is generally not obtained through rigorous testing. This study shows how different operating cycles, components, and lamp and ballast designs affect screwbase compact fluorescent lamp (SCFL) life.

2000-04-11T23:59:59.000Z

66

Helical mode conversion using conical reflector  

E-Print Network (OSTI)

In a recent paper, Mansuripur et al. [Phys. Rev. A 84, 033813 (2011)] indicated and numerically verified the generation of the helical wavefront of optical beams using a conical-shape reflector. Because the optical reflection is largely free from chromatic aberrations, the conical reflector has an advantage of being able to manipulate the helical wavefront with broadband light such as white light or short light pulses. In this study, we introduce geometrical understanding of the function of the conical reflector using the spatially-dependent geometric phase, or more specifically, the spin redirection phase. We also present a theoretical analysis based on three-dimensional matrix calculus and elucidate relationships of the spin, orbital, and total angular momenta between input and output beams. These analyses are very useful when designing other optical devices that utilize spatially-dependent spin redirection phases. Moreover, we experimentally demonstrate the generation of helical beams from an ordinary Gaussian beam using a metallic conical-shape reflector.

H. Kobayashi; K. Nonaka; M. Kitano

2012-04-23T23:59:59.000Z

67

Par Pond water balance  

SciTech Connect

A water budget for the Par Pond hydrologic system was established in order to estimate the rate of groundwater influx to Par Pond. This estimate will be used in modeling exercises to predict Par Pond reservoir elevation and spillway discharge in the scenario where Savannah River water is no longer pumped and discharged into Par Pond. The principal of conservation of mass was used to develop the water budget, where water inflow was set equal to water outflow. Components of the water budget were identified, and the flux associated with each was determined. The water budget was considered balanced when inflow and outflow summed to zero. The results of this study suggest that Par Pond gains water from the groundwater system in the upper reaches of the reservoir, but looses water to the groundwater system near the dam. The rate of flux of groundwater from the water table aquifer into Par Pond was determined to be 13 cfs. The rate of flux from Par Pond to the water table aquifer near the dam was determined to be 7 cfs.

Hiergesell, R.A.; Dixon, K.L.

1996-06-01T23:59:59.000Z

68

Building Technologies Office: Fluorescent and Incandescent Lamps Public  

NLE Websites -- All DOE Office Websites (Extended Search)

Fluorescent and Fluorescent and Incandescent Lamps Public Meeting to someone by E-mail Share Building Technologies Office: Fluorescent and Incandescent Lamps Public Meeting on Facebook Tweet about Building Technologies Office: Fluorescent and Incandescent Lamps Public Meeting on Twitter Bookmark Building Technologies Office: Fluorescent and Incandescent Lamps Public Meeting on Google Bookmark Building Technologies Office: Fluorescent and Incandescent Lamps Public Meeting on Delicious Rank Building Technologies Office: Fluorescent and Incandescent Lamps Public Meeting on Digg Find More places to share Building Technologies Office: Fluorescent and Incandescent Lamps Public Meeting on AddThis.com... About Standards & Test Procedures Implementation, Certification & Enforcement

69

Solar central receiver heliostat reflector assembly  

SciTech Connect

A heliostat reflector assembly for a solar central receiver system comprises a light-weight, readily assemblable frame which supports a sheet of stretchable reflective material and includes mechanism for selectively applying tension to and positioning the sheet to stretch it to optical flatness. The frame is mounted on and supported by a pipe pedestal assembly that, in turn, is installed in the ground. The frame is controllably driven in a predetermined way by a light-weight drive system so as to be angularly adjustable in both elevation and azimuth to track the sun and efficiently continuously reflect the sun's rays to a focal zone, i.e. central receiver, which forms part of a solar energy utilization system, such as a solar energy fueled electrical power generation system. The frame may include a built-in system for testing for optical flatness of the reflector. The preferable geometric configuration of the reflector is octagonal; however, it may be other shapes, such as hexagonal, pentagonal or square. Several different embodiments of means for tensioning and positioning the reflector to achieve optical flatness are disclosed. The reflector assembly is based on the stretch frame concept which provides an extremely light-weight, simple, low-cost reflector assembly that may be driven for positioning and tracking by a light-weight, inexpensive drive system.

Horton, Richard H. (Schenectady, NY); Zdeb, John J. (Clifton Park, NY)

1980-01-01T23:59:59.000Z

70

PARS II User Guide  

Energy.gov (U.S. Department of Energy (DOE))

This document serves as a reference manual to assist DOE end-users in performing their respective functions within the PARS II web application. The document provides a description and “How To” for...

71

PARS II TRAINING  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 Viewing and Reporting 1 Viewing and Reporting Training Workbook V1.0 Department of Energy May 10, 2010 May 10, 2010 PARS II 101 Viewing and Reporting V1.0 ii May 10, 2010 PARS II 101 Viewing and Reporting V1.0 iii Table of Contents OVERSIGHT and ASSESSMENT ........................................................................................................ 1 Exercise 1 Find and View a Project ............................................................................................. 1 Sort the Project List ................................................................................................................. 3 Select a Project ....................................................................................................................... 3

72

Max Tech and Beyond: Fluorescent Lamps  

Science Conference Proceedings (OSTI)

Fluorescent lamps are the most widely used artificial light source today, responsible for approximately 70% of the lumens delivered to our living spaces globally. The technology was originally commercialized in the 1930's, and manufacturers have been steadily improving the efficacy of these lamps over the years through modifications to the phosphors, cathodes, fill-gas, operating frequency, tube diameter and other design attributes. The most efficient commercially available fluorescent lamp is the 25 Watt T5 lamp. This lamp operates at 114-116 lumens per watt while also providing good color rendering and more than 20,000 hours of operating life. Industry experts interviewed indicated that while this lamp is the most efficient in the market today, there is still a further 10 to 14% of potential improvements that may be introduced to the market over the next 2 to 5 years. These improvements include further developments in phosphors, fill-gas, cathode coatings and ultraviolet (UV) reflective glass coatings. The commercialization of these technology improvements will combine to bring about efficacy improvements that will push the technology up to a maximum 125 to 130 lumens per watt. One critical issue raised by researchers that may present a barrier to the realization of these improvements is the fact that technology investment in fluorescent lamps is being reduced in order to prioritize research into light emitting diodes (LEDs) and ceramic metal halide high intensity discharge (HID) lamps. Thus, it is uncertain whether these potential efficacy improvements will be developed, patented and commercialized. The emphasis for premium efficacy will continue to focus on T5 lamps, which are expected to continue to be marketed along with the T8 lamp. Industry experts highlighted the fact that an advantage of the T5 lamp is the fact that it is 40% smaller and yet provides an equivalent lumen output to that of a T8 or T12 lamp. Due to its smaller form factor, the T5 lamp contains less material (i.e., glass, fill gas and phosphor), and has a higher luminance, enabling fixtures to take advantage of the smaller lamp size to improve the optics and provide more efficient overall system illuminance. In addition to offering the market a high-quality efficacious light source, another strong value proposition of fluorescent lighting is its long operating life. In today's market, one manufacturer is offering fluorescent lamps that have a rated life of 79,000 hours - which represents 18 years of service at 12 hours per day, 365 days per year. These lamps, operated using a long-life ballast specified by the manufacturer, take advantage of improvements in cathode coatings, fill gas chemistry and pressure to extend service life by a factor of four over conventional fluorescent lamps. It should be noted that this service life is also longer (approximately twice as long) as today's high-quality LED products. The fluorescent market is currently focused on the T5 and T8 lamp diameters, and it is not expected that other diameters would be introduced. Although T8 is a more optimal diameter from an efficacy perspective, the premium efficiency and optimization effort has been focused on T5 lamps because they are 40% smaller than T8, and are designed to operate at a higher temperature using high-frequency electronic ballasts. The T5 lamp offers savings in terms of materials, packaging and shipping, as well as smaller fixtures with improved optical performance. Manufacturers are actively researching improvements in four critical areas that are expected to yield additional efficacy improvements of approximately 10 to 14 percent over the next five years, ultimately achieving approximately 130 lumens per watt by 2015. The active areas of research where these improvements are anticipated include: (1) Improved phosphors which continue to be developed and patented, enabling higher efficacies as well as better color rendering and lumen maintenance; (2) Enhanced fill gas - adjusting proportions of argon, krypton, neon and xenon to optimize performance, while also m

Scholand, Michael

2012-04-01T23:59:59.000Z

73

High frequency inductive lamp and power oscillator  

DOE Patents (OSTI)

A high frequency inductively coupled electrodeless lamp includes an excitation coil with an effective electrical length which is less than one half wavelength of a driving frequency applied thereto, preferably much less. The driving frequency may be greater than 100 MHz and is preferably as high as 915 MHz. Preferably, the excitation coil is configured as a non-helical, semi-cylindrical conductive surface having less than one turn, in the general shape of a wedding ring. At high frequencies, the current in the coil forms two loops which are spaced apart and parallel to each other. Configured appropriately, the coil approximates a Helmholtz configuration. The lamp preferably utilizes an bulb encased in a reflective ceramic cup with a pre-formed aperture defined therethrough. The ceramic cup may include structural features to aid in alignment and I or a flanged face to aid in thermal management. The lamp head is preferably an integrated lamp head comprising a metal matrix composite surrounding an insulating ceramic with the excitation integrally formed on the ceramic. A novel solid-state oscillator preferably provides RF power to the lamp. The oscillator is a single active element device capable of providing over 70 watts of power at over 70% efficiency. Various control circuits may be employed to adjust the driving frequency of the oscillator.

MacLennan, Donald A. (Gaithersburg, MD); Dymond, Jr., Lauren E. (North Potomac, MD); Gitsevich, Aleksandr (Montgomery Village, MD); Grimm, William G. (Silver Spring, MD); Kipling, Kent (Gaithersburg, MD); Kirkpatrick, Douglas A. (Great Falls, VA); Ola, Samuel A. (Silver Spring, MD); Simpson, James E. (Gaithersburg, MD); Trimble, William C. (Columbia, MD); Tsai, Peter (Olney, MD); Turner, Brian P. (Damascus, MD)

2001-01-01T23:59:59.000Z

74

Energy Cost Calculator for Compact Fluorescent Lamps | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Compact Fluorescent Lamps Compact Fluorescent Lamps Energy Cost Calculator for Compact Fluorescent Lamps October 8, 2013 - 2:18pm Addthis This tool calculates the payback period for your calc retrofit project. Modify the default values to suit your project requirements. Existing incandescent lamp wattage Watts Incandescent lamp cost dollars Incandescent lamp life 1000 hours calc wattage Watts calc cost dollars calc life (6000 hours for moderate use, 10000 hours for high use) 8000 hours Number of lamps in retrofit project Hours operating per week hours Average cost of electricity 0.06 $/kWh Relamper labor costs $/hr Time taken to retrofit all lamps in this project min Time taken to relamp one lamp min Type of Relamping Practiced: Group Relamping: Calculate Simple Payback Period months

75

Survivability of Electronic Compact Fluorescent Lamps  

Science Conference Proceedings (OSTI)

This EPRI Technical Report addresses the fastest growing energy efficient light source8212the electronic compact fluorescent lamp (CFL). Because some of the failure modes for screw-in CFLs are different than those for plug-in CFLs, a cursory review of the difference between the two types of CFLs is provided in the first part of Chapter 2. A broad definition of shortened-life CFLs is also provided in Chapter 2 with an emphasis on revisiting mortality curves, the 10-minute lamp start, other relevant defini...

2008-03-31T23:59:59.000Z

76

PARS II | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Operational Management » Information Systems » PARS II Operational Management » Information Systems » PARS II PARS II Welcome to PARS II PARS II is the Department's official "System of Record" for capital asset project performance information. Because PARS II uses the same data as maintained in our contractors' project management systems, everyone from the Federal Project Director's staff to the Secretary of Energy will have easy access to the same data. The PARS II software application is managed by the MA Office of Engineering and Construction Management and is used by federal and contractor personnel across the nation to record and track the progress of major construction and environmental cleanup projects. Questions or comments about PARS II should be directed to the PARS II Help Desk via email at i-Manage.eas@hq.doe.gov or by calling 301-903-2500

77

PARS II Course Presentation (Course 103) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Presentation (Course 103) PARS II Course Presentation (Course 103) PARS103Presentation.zip More Documents & Publications PARS II Training Workbook (Course 103) PARS II PARS II...

78

PARS II FAQ | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

More Documents & Publications PARS 3.0 Data Model Project Assessment and Reporting System (PARS II) Earned Value (EV) Analysis and Project Assessment & Reporting System (PARS II)...

79

Nuclear Transmutations in HFIR's Beryllium Reflector and Their Impact on Reactor Operation and Reflector Disposal  

SciTech Connect

The High Flux Isotope Reactor located at the Oak Ridge National Laboratory utilizes a large cylindrical beryllium reflector that is subdivided into three concentric regions and encompasses the compact reactor core. Nuclear transmutations caused by neutron activation occur in the beryllium reflector regions, which leads to unwanted neutron absorbing and radiation emitting isotopes. During the past year, two topics related to the HFIR beryllium reflector were reviewed. The first topic included studying the neutron poison (helium-3 and lithium-6) buildup in the reflector regions and its affect on beginning-of-cycle reactivity. A new methodology was developed to predict the reactivity impact and estimated symmetrical critical control element positions as a function of outage time between cycles due to helium-3 buildup and was shown to be in better agreement with actual symmetrical critical control element position data than the current methodology. The second topic included studying the composition of the beryllium reflector regions at discharge as well as during decay to assess the viability of transporting, storing, and ultimately disposing the reflector regions currently stored in the spent fuel pool. The post-irradiation curie inventories were used to determine whether the reflector regions are discharged as transuranic waste or become transuranic waste during the decay period for disposal purposes and to determine the nuclear hazard category, which may affect the controls invoked for transportation and temporary storage. Two of the reflector regions were determined to be transuranic waste at discharge and the other region was determined to become transuranic waste in less than 2 years after being discharged due to the initial uranium content (0.0044 weight percent uranium). It was also concluded that all three of the reflector regions could be classified as nuclear hazard category 3 (potential for localized consequences only).

Chandler, David [ORNL; Maldonado, G Ivan [ORNL; Primm, Trent [ORNL; Proctor, Larry Duane [ORNL

2012-01-01T23:59:59.000Z

80

PAR | OpenEI  

Open Energy Info (EERE)

PAR PAR Dataset Summary Description (Abstract): Photosynthetically active radiation in kWh/m2/day for 1 year organized into cells with 10km x 10km (Purpose): The BRASIL-SR model and the SPRING software (both developed by INPE -National Institute for Space Research) were used to produce the dataset and SHAPE files Source INPE (National Institute for Space Research) and LABSOLAR (Laboratory of Solar Energy/Federal University of Santa Catarina) - Brazil Date Released August 08th, 2009 (5 years ago) Date Updated August 08th, 2009 (5 years ago) Keywords INPE LABSOLAR PAR solar SWERA UNEP Data application/zip icon Download Shapefile (zip, 10.4 MiB) text/csv icon Download Data (csv, 15.7 MiB) Quality Metrics Level of Review Some Review Comment Temporal and Spatial Coverage

Note: This page contains sample records for the topic "reflector par lamps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Energy Performance of Compact Fluorescent Lamps  

Science Conference Proceedings (OSTI)

This power quality (PQ) case study presents the results of tests performed at the Worcester Polytechnic Institute, in contract with the EPRI Power Electronics Applications Center (PEAC), to determine the light output, power consumption, efficiency, and power factor of off-the-shelf electronic and magnetic compact fluorescent lamps.

2003-12-31T23:59:59.000Z

82

Dual annular rotating "windowed" nuclear reflector reactor control system  

DOE Patents (OSTI)

A nuclear reactor control system is provided in a nuclear reactor having a core operating in the fast neutron energy spectrum where criticality control is achieved by neutron leakage. The control system includes dual annular, rotatable reflector rings. There are two reflector rings: an inner reflector ring and an outer reflector ring. The reflectors are concentrically assembled, surround the reactor core, and each reflector ring includes a plurality of openings. The openings in each ring are capable of being aligned or non-aligned with each other. Independent driving means for each of the annular reflector rings is provided so that reactor criticality can be initiated and controlled by rotation of either reflector ring such that the extent of alignment of the openings in each ring controls the reflection of neutrons from the core.

Jacox, Michael G. (Idaho Falls, ID); Drexler, Robert L. (Idaho Falls, ID); Hunt, Robert N. M. (Idaho Falls, ID); Lake, James A. (Idaho Falls, ID)

1994-01-01T23:59:59.000Z

83

Laboratory Evaluation of LED T8 Replacement Lamp Products  

Science Conference Proceedings (OSTI)

A report on a lab setting analysis involving LED lamps intended to directly replace T8 fluorescent lamps (4') showing light output, power, and economic comparisons with other fluorescent options.

Richman, Eric E.; Kinzey, Bruce R.; Miller, Naomi J.

2011-05-23T23:59:59.000Z

84

The Effects of Table Lamp Shade Shape and Compact Fluorescent...  

NLE Websites -- All DOE Office Websites (Extended Search)

The Effects of Table Lamp Shade Shape and Compact Fluorescent Lamp Burning Position on Visual Comfort Speaker(s): Zaidi Abdullah Date: March 15, 2001 - 12:00pm Location: Bldg. 90...

85

Light Flicker in Compact Fluorescent Lamps Caused by Voltage Fluctuations  

Science Conference Proceedings (OSTI)

This power quality (PQ) case study presents tests performed at the EPRI Power Electronics Applications Center (PEAC) Power Quality Test Facility to characterize the light output of an incandescent lamp and compact fluorescent lamps during voltage fluctuations.

2003-12-31T23:59:59.000Z

86

PARS II Software Release Notes  

Energy.gov (U.S. Department of Energy (DOE))

New and improved functionality was released in Version 8.0.20120308 of PARS II. This release offers PARS II Users a significant number of enhancements across all facets of the application. These...

87

Solar reflector materials. [Overview of state-of-art  

SciTech Connect

A brief overview is given of the current state-of-the-art in solar reflector materials. Its purpose is to outline the uses of reflectors in the solar industry and present some insights into the operational and materials considerations that must be incorporated into the solar reflector design. Current problem areas and research goals will be emphasized.

Lind, M. A.

1979-01-01T23:59:59.000Z

88

Novel Nanophosphors for High Efficiency Fluorescent Lamps  

SciTech Connect

This is the Final Report of the Novel Nanophosphors for High Efficiency Fluorescent Lamps, Department of Energy (DOE). The overall goal of this three-year program is to develop novel hybrid phosphors by coating commercially available lamp phosphors with highly stable wide band-gap nanocrystalline phosphors (NCP). The prime technical approach is the development of NCP quantum-splitting phosphor (QSP) and ultra-violet (UV) emitting phosphors with quantum efficiencies exceeding that of the conventional phosphors at 185 nm. The novel hybrid phosphors will increase the efficiency of the fluorescent lamps by up to 32%, enabling total energy savings of 0.26 quads, the reduction in the U.S. energy bill by $6.5 billion and the reduction of the annual carbon emission by 4.1 billion kilogram. Our work started by investigating through modeling calculations the requirement for the particle size of the NCP. Our work to develop suitable nanocrystalline phosphors started with the known oxide quantum splitting and UV emitting phosphors. We demonstrated several synthesis techniques for the production of high quality nanocrystalline materials that crystallizes in the desired phase and with the desired particle size. In collaboration with our subcontractor we demonstrated the feasibility for the manufacture of NC phosphors. We also demonstrated novel techniques of coating the NCP on the surface of micron sized phosphors. Our chief achievement pertains to the successful testing of the coated hybrid phosphor systems in linear fluorescent lamps. In linear fluorescent lamp tests, we have demonstrated up to 7% increase in the efficacy of hybrid phosphors over the conventional (uncoated) phosphors. We have also demonstrated the improvement in the lumen maintenance of the coated phosphors. A hybrid phosphor system based on the commercial red emitting phosphor, Y{sub 2}O{sub 3}:Eu{sup 3+} did not show the anticipated improvement in lamp efficacy. We explored the reasons for this observation, which are detailed in this report. Within the program we have carried out fundamental investigations into the physical processes that determine the quantum splitting behavior of the Pr{sup 3+} ion in solids. Specifically, we have investigated the quantum splitting luminescence of this ion in the LaPO{sub 4}, SrAl{sub 12}O{sub 19} and LiLaP{sub 4}O{sub 12} host lattices. In this final report we summarize the technical work completed under the Program, summarize our findings about the performance limits of the various technologies we investigated, and outline promising paths for future work.

Alok Srivatava

2007-03-31T23:59:59.000Z

89

Controlling the vapor pressure of a mercury lamp  

DOE Patents (OSTI)

The invention described herein discloses a method and apparatus for controlling the Hg vapor pressure within a lamp. This is done by establishing and controlling two temperature zones within the lamp. One zone is colder than the other zone. The first zone is called the cold spot. By controlling the temperature of the cold spot, the Hg vapor pressure within the lamp is controlled. Likewise, by controlling the Hg vapor pressure of the lamp, the intensity and linewidth of the radiation emitted from the lamp is controlled. 2 figs.

Grossman, M.W.; George, W.A.

1988-05-24T23:59:59.000Z

90

Controlling the vapor pressure of a mercury lamp  

DOE Patents (OSTI)

The invention described herein discloses a method and apparatus for controlling the Hg vapor pressure within a lamp. This is done by establishing and controlling two temperature zones within the lamp. One zone is colder than the other zone. The first zone is called the cold spot. By controlling the temperature of the cold spot, the Hg vapor pressure within the lamp is controlled. Likewise, by controlling the Hg vapor pressure of the lamp, the intensity and linewidth of the radiation emitted from the lamp is controlled.

Grossman, Mark W. (Belmont, MA); George, William A. (Rockport, MA)

1988-01-01T23:59:59.000Z

91

LED lamp color control system and method  

DOE Patents (OSTI)

An LED lamp color control system and method including an LED lamp having an LED controller 58; and a plurality of LED channels 60 operably connected to the LED controller 58, each of the plurality of LED channels 60 having a channel switch 62 in series with at least one shunted LED circuit 83, the shunted LED circuit 83 having a shunt switch 68 in parallel with an LED source 80. The LED controller 58 determines whether the LED source 80 is in a feedback controllable range, stores measured optical flux for the LED source 80 when the LED source 80 is in the feedback controllable range, and bypasses storing the measured optical flux when the LED source 80 is not in the feedback controllable range.

Gaines, James; Clauberg, Bernd; Van Erp, Josephus A.M.

2013-02-05T23:59:59.000Z

92

Lamp method and apparatus using multiple reflections  

DOE Patents (OSTI)

A method wherein the light in a sulfur or selenium lamp is reflected through the fill a multiplicity of times to convert ultraviolet radiation to visible is disclosed. A light emitting device comprised of an electrodeless envelope which bears a light reflecting covering around a first portion which does not crack due to differential thermal expansion and which has a second portion which comprises a light transmissive aperture. 20 figs.

MacLennan, D.A.; Turner, B.; Kipling, K.

1999-05-11T23:59:59.000Z

93

Lamp method and apparatus using multiple reflections  

DOE Patents (OSTI)

A method wherein the light in a sulfur or selenium lamp is reflected through the fill a multiplicity of times to convert ultraviolet radiation to visible. A light emitting device comprised of an electrodeless envelope which bears a light reflecting covering around a first portion which does not crack due to differential thermal expansion and which has a second portion which comprises a light transmissive aperture.

MacLennan, Donald A. (Butler, PA); Turner, Brian (Damascus, MD); Kipling, Kent (Gaithersburg, MD)

1999-01-01T23:59:59.000Z

94

SunShot Initiative: Advanced Manufacture of Reflectors  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Manufacture of Advanced Manufacture of Reflectors to someone by E-mail Share SunShot Initiative: Advanced Manufacture of Reflectors on Facebook Tweet about SunShot Initiative: Advanced Manufacture of Reflectors on Twitter Bookmark SunShot Initiative: Advanced Manufacture of Reflectors on Google Bookmark SunShot Initiative: Advanced Manufacture of Reflectors on Delicious Rank SunShot Initiative: Advanced Manufacture of Reflectors on Digg Find More places to share SunShot Initiative: Advanced Manufacture of Reflectors on AddThis.com... Concentrating Solar Power Systems Components Competitive Awards CSP Research & Development Thermal Storage CSP Recovery Act Baseload CSP SunShot Multidisciplinary University Research Initiative CSP Heat Integration for Baseload Renewable Energy Deployment

95

High output lamp with high brightness  

DOE Patents (OSTI)

An ultra bright, low wattage inductively coupled electrodeless aperture lamp is powered by a solid state RF source in the range of several tens to several hundreds of watts at various frequencies in the range of 400 to 900 MHz. Numerous novel lamp circuits and components are disclosed including a wedding ring shaped coil having one axial and one radial lead, a high accuracy capacitor stack, a high thermal conductivity aperture cup and various other aperture bulb configurations, a coaxial capacitor arrangement, and an integrated coil and capacitor assembly. Numerous novel RF circuits are also disclosed including a high power oscillator circuit with reduced complexity resonant pole configuration, parallel RF power FET transistors with soft gate switching, a continuously variable frequency tuning circuit, a six port directional coupler, an impedance switching RF source, and an RF source with controlled frequency-load characteristics. Numerous novel RF control methods are disclosed including controlled adjustment of the operating frequency to find a resonant frequency and reduce reflected RF power, controlled switching of an impedance switched lamp system, active power control and active gate bias control.

Kirkpatrick, Douglas A. (Great Falls, VA); Bass, Gary K. (Mt. Airy, MD); Copsey, Jesse F. (Germantown, MD); Garber, Jr., William E. (Poolesville, MD); Kwong, Vincent H. (Vancouver, CA); Levin, Izrail (Silver Spring, MD); MacLennan, Donald A. (Gaithersburg, MD); Roy, Robert J. (Frederick, MD); Steiner, Paul E. (Olney, MD); Tsai, Peter (Olney, MD); Turner, Brian P. (Damascus, MD)

2002-01-01T23:59:59.000Z

96

prsente par Joseph BURGUBURU  

E-Print Network (OSTI)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 I �tude d'une chambre de combustion de type TVC 25 2 Généralités sur la combustion 27 2.1 Régimes turbines à gaz . . . . . . . . . 50 3 La stabilisation par cavité 55 3.1 Dynamique de l'écoulement sur une - AE Technologie Enhancement for Clean Combustion in Aero-Engines TET Température d'Entrée Turbine TTV

97

High intensity discharge lamp self-adjusting ballast system sensitive to the radiant energy or heat of the lamp  

SciTech Connect

This patent describes a self-adjusting ballast system for mercury vapor, high intensity discharge lamps having outputs of 100 watts or greater, comprising: a direct current source; a lamp circuit containing a high intensity discharge lamp; sensing means for sensing the radiant energy output of the lamp; a pulse width modulator which, in response to the output of the sensing means, varies the width of the pulses that power the lamp during warm-up of the lamp; a high frequency oscillator; a DC to AC converter that converts current from the direct source to pulses of alternating current for powering the lamp, the converter comprising: at least one switch for gating current to the lamp; a switch control means, responsive to the high frequency oscillator, for controlling the switch and controlling the frequency of the alternating current pulses that power the lamp; current sensing means for sensing the current being supplied to the lamp; and current control means for limiting the current through the lamp to a predetermined safe level when the current sensed by the current sensing means exceeds a reference value.

Kuhnel, D.S.; Ottenstein, S.A.

1987-07-21T23:59:59.000Z

98

Vacuum deposited polymer/silver reflector material  

DOE Green Energy (OSTI)

Weatherable, low cost, front surface, solar reflectors on flexible substrates would be highly desirable for lamination to solar concentrator panels. The method to be described in this paper may permit such reflector material to be fabricated for less than 50 cents per square foot. Vacuum deposited Polymer/Silver/Polymer reflectors and Fabry-Perot interference filters were fabricated in a vacuum web coating operation on polyester substrates. Reflectivities were measured in the wavelength range from .4 {mu}m to .8 {mu}m. It is hoped that a low cost substrate can be used with the substrate laminated to the concentrator and the weatherable acrylic polymer coating facing the sun. This technique should be capable of deposition line speeds approaching 1500 linear feet/minute. Central to this technique is a new vacuum deposition process for the high rate deposition of polymer films. This polymer process involves the flash evaporation of an acrylic monomer onto a moving substrate. The monomer is subsequently cured by an electron beam or ultraviolet light. This high speed polymer film deposition process has been named the PML process - for Polymer Multi-Layer.

Affinito, J.; Martin, P.; Gross, M.; Bennett, W.

1994-07-01T23:59:59.000Z

99

Hybrid electronic ballast operating the HPS lamp at constant power  

SciTech Connect

A hybrid solid-state ballast that operates high-pressure sodium (HPS) lamps at main frequency with constant power through rated life is described. The system utilizes two inductors connected in series and a bidirectional semiconductor switch connected in parallel to one of them. A lamp-starting circuit has also been included in the ballast. The static switch, with phase angle control provided by power feedback, actuates on lamp current compensating variations of the main voltage and increases of lamp arc voltage. The system offers the following: (1) increase of lamp life and system lumen maintenance; (2) power factor and total harmonic distortion of line current comparable to conventional lag ballast; and (3) operating cost savings, both in terms of energy cost and lamp replacement cost.

Kaiser, W. [Univ. de Sao Paulo (Brazil)

1998-03-01T23:59:59.000Z

100

prsente par Alexandre Demeure  

E-Print Network (OSTI)

particulier ceux du bowling pour le cadeau de départ qui m'a été très utile par la suite . Je remercie aussi progresser dans notre compréhension des problèmes et solutions, que ce soit au labo, à l'hotel, dans un train nuit à l'hotel ^_^. Je remercie aussi Jean et Théodora qui m'ont eux aussi sauvé la vie en m'emmenant à

Paris-Sud XI, Université de

Note: This page contains sample records for the topic "reflector par lamps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Compact microwave lamp having a tuning block and a dielectric located in a lamp cavity  

DOE Patents (OSTI)

A microwave lamp having a compact structure utilizing a coupling slot which has a dielectric member extending therethrough and a tuning block adjoining the coupling slot. A non-conventional waveguide is used which has about the width of a WR-284 waveguide and about the length of a WR-340 waveguide.

Simpson, James E. (Gaithersburg, MD)

2000-01-01T23:59:59.000Z

102

LED LAMP OR BULB WITH REMOTE PHOSPHOR AND DIFFUSER ...  

An LED lamp or bulb is disclosed that comprises a light source, a heat sink structure and an optical cavity. The optical cavity comprises a phosphor ...

103

Heat transfer assembly for a fluorescent lamp and fixture  

DOE Patents (OSTI)

In a lighting fixture including a lamp and a housing, a heat transfer structure is disclosed for reducing the minimum lamp wall temperature of a fluorescent light bulb. The heat transfer structure, constructed of thermally conductive material, extends from inside the housing to outside the housing, transferring heat energy generated from a fluorescent light bulb to outside the housing where the heat energy is dissipated to the ambient air outside the housing. Also disclosed is a method for reducing minimum lamp wall temperatures. Further disclosed is an improved lighting fixture including a lamp, a housing and the aforementioned heat transfer structure. 11 figs.

Siminovitch, M.J.; Rubenstein, F.M.; Whitman, R.E.

1992-12-29T23:59:59.000Z

104

Fluorescent lamp unit with magnetic field generating means  

DOE Patents (OSTI)

A fluorescent lamp unit having a magnetic field generating means for improving the performance of the fluorescent lamp is disclosed. In a preferred embodiment the fluorescent lamp comprises four longitudinally extending leg portions disposed in substantially quadrangular columnar array and joined by three generally U-shaped portions disposed in different planes. In another embodiment of the invention the magnetic field generating means comprises a plurality of permanent magnets secured together to form a single columnar structure disposed within a centrally located region defined by the shape of lamp envelope. 4 figs.

Grossman, M.W.; George, W.A.

1989-08-08T23:59:59.000Z

105

Development and characterization of a high CRI LED lamp.  

E-Print Network (OSTI)

??The aim of this thesis is to realize a high CRI LED lamp using the color mixing technique. We start from a high efficiency white… (more)

Meneghesso , Matteo

2012-01-01T23:59:59.000Z

106

Stadiums and arenas use efficient, high wattage lamps - Today ...  

U.S. Energy Information Administration (EIA)

Other lighting types, such as light-emitting diode (LED), incandescent, and halogen lamps, are used in applications like signals, signage, ...

107

Heat transfer assembly for a fluorescent lamp and fixture  

DOE Patents (OSTI)

In a lighting fixture including a lamp and a housing, a heat transfer structure is disclosed for reducing the minimum lamp wall temperature of a fluorescent light bulb. The heat transfer structure, constructed of thermally conductive material, extends from inside the housing to outside the housing, transferring heat energy generated from a fluorescent light bulb to outside the housing where the heat energy is dissipated to the ambient air outside the housing. Also disclosed is a method for reducing minimum lamp wall temperatures. Further disclosed is an improved lighting fixture including a lamp, a housing and the aforementioned heat transfer structure.

Siminovitch, Michael J. (Richmond, CA); Rubenstein, Francis M. (Berkeley, CA); Whitman, Richard E. (Richmond, CA)

1992-01-01T23:59:59.000Z

108

PARS II Extraction Utility | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PARS II Extraction Utility DEC1387487110111DekkerPMISExtractionUtilityv8020101217.zip More Documents & Publications Dekker PMIS Extraction Utility Release Notes for the PARS...

109

ARM - Datastreams - pars2  

NLE Websites -- All DOE Office Websites (Extended Search)

Datastreamspars2 Datastreamspars2 Documentation Data Quality Plots ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Datastream : PARS2 OTT Parsivel2 Laser Disdrometer Active Dates 2012.09.24 - 2013.09.26 Measurement Categories Atmospheric State, Cloud Properties Originating Instrument Laser Disdrometer (LDIS) Measurements Only measurements considered scientifically relevant are shown below by default. Show all measurements Measurement Units Variable Altitude above mean sea level m alt Base time in Epoch seconds since 1970-1-1 0:00:00 0:00 base_time Class size width mm class_size_width ( particle_size ) Diameter of largest drop observed mm diameter_max ( time ) Diameter of smallest drop observed mm diameter_min ( time )

110

Fluorescent lamp with static magnetic field generating means  

DOE Patents (OSTI)

A fluorescent lamp wherein magnetic field generating means (e.g., permanent magnets) are utilized to generate a static magnetic field across the respective electrode structures of the lamp such that maximum field strength is located at the electrode's filament. An increase in efficacy during operation has been observed. 2 figs.

Moskowitz, P.E.; Maya, J.

1987-09-08T23:59:59.000Z

111

Fluorescent lamp with static magnetic field generating means  

DOE Patents (OSTI)

A fluorescent lamp wherein magnetic field generating means (e.g., permanent magnets) are utilized to generate a static magnetic field across the respective electrode structures of the lamp such that maximum field strength is located at the electrode's filament. An increase in efficacy during operation has been observed.

Moskowitz, Philip E. (Peabody, MA); Maya, Jakob (Brookline, MA)

1987-01-01T23:59:59.000Z

112

An Electrical Cathode Model of a High Pressure Sodium Lamp  

Science Conference Proceedings (OSTI)

An electrical cathode model (ECM) of a high pressure sodium lamp (HPS) based on physical laws has been developed. The proposed ECM calculates the instantaneous voltage drop in a cathode sheath and the temperature distribution inside the cathode using ... Keywords: cathode model, HPS lamp ballast designs

Jose Luis Tapia; Joel O. Pacheco Sotelo; Eduardo Diaz Rodriguez; Yulia Nikolaevna Ledeneva; Rene Arnulfo Garcia Hernandez

2010-09-01T23:59:59.000Z

113

DEFINING THE EFFECTIVENESS OF UV LAMPS  

Office of Scientific and Technical Information (OSTI)

ARTI-21CR/610-40030-01 ARTI-21CR/610-40030-01 DEFINING THE EFFECTIVENESS OF UV LAMPS INSTALLED IN CIRCULATING AIR DUCTWORK Final Report Date Published - November 2002 Douglas VanOsdell and Karin Foarde RTI P.O. Box 12194 Research Triangle Park, NC 27709-2194 Prepared for the AIR-CONDITIONING AND REFRIGERATION TECHNOLOGY INSTITUTE 4100 N. Fairfax Drive, Suite 200, Arlington, Virginia 22203 Distribution A - Approved for public release; further dissemination unlimited. DISCLAIMER This report was prepared as an account of work sponsored by the Air-Conditioning and Refrigeration Technology Institute (ARTI) under its "HVAC&R Research for the 21 st Century" (21-CR) program. Neither ARTI, the financial supporters of the 21-CR program, or any agency

114

Development and fabrication of solar-collector SMC reflector assemblies  

SciTech Connect

This project produced a parabolic trough solar collector array consisting of four each 2 x 6 m reflector modules. Each module required a structural torque tube on which were mounted six 1 x 2 m molded sheet molding compound (SMC)/glass panels. The project reported here established the fabrication, assembly, and inspection procedures for production of SMC reflector panels and assemblies.

Kirsch, P.A.

1982-12-01T23:59:59.000Z

115

Contrast between the vertical and horizontal mercury discharge lamps  

SciTech Connect

This paper discusses the thermal behavior of a high pressure mercury lamp in a horizontal position, compared with that of a vertical lamp. The model adopted is three-dimensional, steady, and powered DC. After the model validation, we analyzed temperature fields and velocities for the case of the lamp in a horizontal position by comparing it with those of a lamp in vertical position. This setting initially fixed the wall temperature equal to 1000 K. However, the morphology of the temperature profile in the case of the horizontal lamp indicates that the temperature of the wall cannot be uniform. Thus, we have, in a second time, performed an energy balance at the wall to calculate its temperature. This aims to understand the influence of convection on the thermal properties of the source.

Ben Hamida, M. B.; Helali, H.; Araoud, Z.; Charrada, K. [Unite d'Etude des Milieux Ionises et Reactifs, IPEIM, 5019 route de Kairouan Monastir (Tunisia)

2011-06-15T23:59:59.000Z

116

Effect of filament power removal on a fluorescent lamp system  

SciTech Connect

Two techniques are used to measure the effects of removing the filament power from a two-lamp, F-40, rapid-start fluorescent lamp system. The changes are measured for a standard CBM core-coil ballast and for a solid-state ballast operating the lamp at high frequency. There is a 4 tp 6% increase in system efficacy when the filament power is removed. Removal of filament power also decreases filament temperature from 1000/sup 0/C to below 700/sup 0/C in lamps operated at 60 Hz, and from above 600/sup 0/C to 300/sup 0/C in lamps operated at high frequency. The study shows that the arc current and anode fall also determine filament temperature.

Verderber, R.R.; Morse, O.; Rubinstein, F.M.

1985-07-01T23:59:59.000Z

117

Compatibility testing of fluorescent lamp and ballast systems  

SciTech Connect

The rapid growth in the use of electronic ballasts for fluorescent lighting systems, and the corresponding increase in the number of new products and new manufacturers in the market, has raised a number of questions regarding the compatibility of the lamps and ballasts used in fluorescent systems. Because many of the new products start and operate lamps differently than previous products, the relevant American National Standards Institute requirements may no longer be adequate for addressing compatibility concerns. The impacts on system performance of the newer products of a parametric study designed to test key hypotheses regarding the impact of ballast parameters on fluorescent lamp life. In this study, samples of 4-ft T8 fluorescent lamps were operated on duty cycles of 5 min on and 5 min off, using seven different ballast types. The results of the study indicate which parameters seem to have the biggest effect on lamp life, and can be used in establishing new performance standards for fluorescent systems.

Ji, Y.; Davis, R.; O' Rourke, C.; Chui, E.W.M.

1999-12-01T23:59:59.000Z

118

PARS II Training Materials | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PARS II Training Materials PARS II Training Materials PARS II Training Materials PARS II presentation hand-outs and step-by-step "how to" exercises for each course are available for download. Users who are attending Web classes should download these documents prior to attending the class. PARS 102 - Monthly Updating and Reporting Introduction to PARS II, finding and selecting projects in your domain, viewing Oversight and Assessment (OA) data, viewing Contractor Project Performance (CPP) dashboards, updating your monthly status assessment, adding attachments, and running standard, pre-built reports. PARS 102 Presentation PARS 102 Workbook PARS 103 - Updating Projects and Reporting Introduction to PARS II, finding and selecting projects in your domain, entering new projects into PARS II, entering and editing Oversight and

119

Segmentation par modèle déformable surfacique localement régularisé par spline lissante.  

E-Print Network (OSTI)

??La segmentation d'image par modèles déformables est une méthode permettant de localiser les frontières d'un objet. Dans le cas d'images difficiles à segmenter en raison… (more)

Velut, Jérôme

2007-01-01T23:59:59.000Z

120

Max Tech and Beyond: High-Intensity Discharge Lamps  

Science Conference Proceedings (OSTI)

High-intensity discharge (HID) lamps are most often found in industrial and commercial applications, and are the light source of choice in street and area lighting, and sports stadium illumination. HID lamps are produced in three types - mercury vapor (MV), high pressure sodium (HPS) and metal halide (MH). Of these, MV and MH are considered white-light sources (although the MV exhibits poor color rendering) and HPS produces a yellow-orange color light. A fourth lamp, low-pressure sodium (LPS), is not a HID lamp by definition, but it is used in similar applications and thus is often grouped with HID lamps. With the notable exception of MV which is comparatively inefficient and in decline in the US from both a sales and installed stock point of view; HPS, LPS and MH all have efficacies over 100 lumens per watt. The figure below presents the efficacy trends over time for commercially available HID lamps and LPS, starting with MV and LPS in 1930's followed by the development of HPS and MH in the 1960's. In HID lamps, light is generated by creating an electric arc between two electrodes in an arc tube. The particles in the arc are partially ionized, making them electrically conductive, and a light-emitting 'plasma' is created. This arc occurs within the arc tube, which for most HID lamps is enclosed within an evacuated outer bulb that thermally isolates and protects the hot arc tube from the surroundings. Unlike a fluorescent lamp that produces visible light through down-converting UV light with phosphors, the arc itself is the light source in an HID lamp, emitting visible radiation that is characteristic of the elements present in the plasma. Thus, the mixture of elements included in the arc tube is one critical factor determining the quality of the light emitted from the lamp, including its correlated color temperature (CCT) and color rendering index (CRI). Similar to fluorescent lamps, HID lamps require a ballast to start and maintain stable operating conditions, and this necessitates additional power beyond that used by the lamp itself. HID lamps offer important advantages compared to other lighting technologies, making them well suited for certain applications. HID lamps can be very efficient, have long operating lives, are relatively temperature-insensitive and produce a large quantity of light from a small package. For these reasons, HID lamps are often used when high levels of illumination are required over large areas and where operating and maintenance costs must be kept to a minimum. Furthermore, if the installation has a significant mounting height, high-power HID lamps can offer superior optical performance luminaires, reducing the number of lamps required to illuminate a given area. The indoor environments best suited to HID lamps are those with high ceilings, such as those commonly found in industrial spaces, warehouses, large retail spaces, sports halls and large public areas. Research into efficacy improvements for HID lighting technologies has generally followed market demand for these lamps, which is in decline for MV and LPS, has reached a plateau for HPS and is growing for MH. Several manufacturers interviewed for this study indicated that although solid-state lighting was now receiving the bulk of their company's R&D investment, there are still strong HID lamp research programs, which concentrate on MH technologies, with some limited amount of investment in HPS for specific niche applications (e.g., agricultural greenhouses). LPS and MV lamps are no longer being researched or improved in terms of efficacy or other performance attributes, although some consider MH HID lamps to be the next-generation MV lamp. Thus, the efficacy values of commercially available MV, LPS and HPS lamps are not expected to increase in the next 5 to 10 years. MH lamps, and more specifically, ceramic MH lamps are continuing to improve in efficacy as well as light quality, manufacturability and lamp life. Within an HID lamp, the light-producing plasma must be heated to sufficiently high temperatures to achieve high efficiencie

Scholand, Michael

2012-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "reflector par lamps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

The effects of fixture type and HVAC integration on fluorescent lamp/ballast performance  

SciTech Connect

This paper describes the effects of fixture type and lamp compartment air extract characteristics on lamp/ballast performance. A luminaire/plenum/HVAC simulator was used to measure minimum lamp wall temperature inside four fixture types while varying lamp-compartment extract conditions. Experimental data show that the lumen output of the lamp/ballast system varies by 20% and system efficacy by 10%, depending on the type of fixture and lamp-compartment extract technique employed.

Siminovitch, M.J.; Rubinstein, F.M.; Verderber, R.R.; Clark, T.A.

1986-06-01T23:59:59.000Z

122

REFLECTOR CONTROL OF A BOILING-WATER REACTOR  

DOE Patents (OSTI)

A line connecting the reactor with a spent steam condenser contains a valve set to open when the pressure in the reactor exceeds a predetermined value and an orifice on the upstream side of the valve. Another line connects the reflector with this line between the orifice and the valve. An excess steam pressure causes the valve to open and the flow of steam through the line draws water out of the reflector. Provision is also made for adding water to the reflector when the steam pressure drops. (AEC)

Treshow, M.

1962-05-22T23:59:59.000Z

123

Monthly optimum inclination of glass cover and external reflector of a basin type solar still with internal and external reflector  

Science Conference Proceedings (OSTI)

In this report, we present a theoretical analysis of a basin type solar still with internal and external reflectors. The external reflector is a flat plate that extends from the back wall of the still, and can presumably be inclined forwards or backwards according to the month. We have theoretically predicted the daily amount of distillate produced by the still throughout the year, which varies according to the inclination angle of both the glass cover and the external reflector, at 30 N latitude. We found the optimum external reflector inclination for each month for a still with a glass cover inclination of 10-50 deg. The increase in the average daily amount of distillate throughout the year of a still with inclined external reflector with optimum inclination in addition to an internal reflector, compared to a conventional basin type still was predicted to be 29%, 43% or 67% when the glass cover inclination is 10 deg, 30 deg or 50 deg and the length of external reflector is half the still's length. (author)

Tanaka, Hiroshi [Mechanical Engineering Department, Kurume National College of Technology, Komorino, Kurume, Fukuoka 830-8555 (Japan)

2010-11-15T23:59:59.000Z

124

Covered Product Category: Compact Fluorescent Lamps | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Covered Product Category: Compact Fluorescent Lamps Covered Product Category: Compact Fluorescent Lamps Covered Product Category: Compact Fluorescent Lamps October 7, 2013 - 10:48am Addthis ENERGY STAR Qualified Products Federal Energy Management Program (FEMP) provides acquisition guidance across a variety of product categories, including compact fluorescent lamps (CFLs), which are an ENERGY STAR-qualified product category. Federal laws and executive orders mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law. Most manufacturers display the ENERGY STAR label on complying models. For a model not displaying this label, check the manufacturer's literature to determine if it meets the efficiency requirements outlined by ENERGY STAR.

125

Information Resources: LED Replacements for Linear Fluorescent Lamps  

NLE Websites -- All DOE Office Websites (Extended Search)

Replacements for Linear Fluorescent Lamps Webcast Replacements for Linear Fluorescent Lamps Webcast In this June 20, 2011 webcast on LED products marketed as replacements for linear fluorescent lamps, Jason Tuenge of the Pacific Northwest National Laboratory (PNNL) discussed current Lighting Facts-listed products as well as products evaluated in the latest CALiPER reports. Eric Richman, also of PNNL, reported on a recently completed GATEWAY demonstration project, in which LED and fluorescent lamps were installed in a variety of recessed troffer luminaires for comparison in an office environment. The presentation concluded with a discussion of specifications listed in a newly updated technology fact sheet. View presentation slides View the text-alternative version View the webcast (WMV 16 MB) Download Windows Media Player

126

Max Tech and Beyond: High-Intensity Discharge Lamps  

E-Print Network (OSTI)

the reason industry started by developing ceramic MH lampsceramic metal halide lamps, which are the focus of industry’industry had invested in the development of very low wattage ceramic

Scholand, Michael

2012-01-01T23:59:59.000Z

127

COST EFFECTIVENESS OF LONG LIFE INCANDESCENT LAMPS AND ENERGY BUTTONS  

E-Print Network (OSTI)

button, a 100 watt (130 volt) lamp, a 100 watt long lifeFluorescent Watt L I ltage (volts) cu ge ic in s) ative ( 1the diode energy button (83 volts) was obtained by dividing

Verderber, Rudy

2013-01-01T23:59:59.000Z

128

The LAMP QPF Products. Part I: Model Development  

Science Conference Proceedings (OSTI)

The Local AWIPS (Advanced Weather Interactive Processing System) MOS (model output statistics) Program (LAMP) quantitative precipitation forecast (QPF) system produces 1–22-h forecasts of precipitation over the conterminous United States. The ...

Jerome P. Charba

1998-12-01T23:59:59.000Z

129

Electronic Radio-Frequency (Electrodeless) Induction Lamps: A Fluorescent Technology  

Science Conference Proceedings (OSTI)

This EPRI Technical Update addresses an expanding energy efficient light source electronic radio-frequency (electrodeless) induction lamps. Business and technical market factors (Chapter 2) use the past and future growth of the CFL market to illustrate the potential for the induction lighting market while emphasizing future technical improvements. Discussion of the importance of utility involvement in helping their customers consider induction lamps for high-efficiency fluorescent applications with long-...

2007-12-20T23:59:59.000Z

130

An ultraviolet barrier-discharge OH molecular lamp  

Science Conference Proceedings (OSTI)

The energy and spectral parameters of a barrier discharge in a mixture of argon with hydroxyl {sup .}OH are studied experimentally. A sealed lamp with the radiation intensity maximum at {lambda} = 309.2 nm, an emitting surface area of {approx}700 cm{sup 2}, and a radiant excitance of 1.5 mW cm{sup -2} has been fabricated. The radiant power of the lamp is 1.1 W. (laser applications and other topics in quantum electronics)

Sosnin, E A; Erofeev, M V; Avdeev, S M; Panchenko, Aleksei N; Panarin, V A; Skakun, V S; Tarasenko, Viktor F; Shitts, D V [Institute of High Current Electronics, Siberian Branch, Russian Academy of Sciences, Tomsk (Russian Federation)

2006-10-31T23:59:59.000Z

131

Neutronic evaluation of GCFR core diluents and reflectors  

E-Print Network (OSTI)

Materials are evaluated for use as in-core diluents and as peripheral reflectors for Gas-Cooled Fast Reactor (GFR) service, using coupled Monte Carlo (MCNP) and isotopics (ORIGEN) codes. The principal performance indices ...

Yu, Kun, 1974-

2003-01-01T23:59:59.000Z

132

Proposed Data Elements for PARS II Web Application | Department...  

NLE Websites -- All DOE Office Websites (Extended Search)

Proposed Data Elements for PARS II Web Application Proposed Data Elements for PARS II Web Application Proposed Data Elements for PARS II Web Application More Documents &...

133

PARS 3.0 Data Model | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Model More Documents & Publications PARS II FAQ Project Assessment and Reporting System (PARS II) Earned Value (EV) Analysis and Project Assessment & Reporting System (PARS II)...

134

Compact fluorescent lamp using horizontal and vertical insulating septums and convective venting geometry  

DOE Patents (OSTI)

A novel design is described for a compact fluorescent lamp, including a lamp geometry which will increase light output and efficacy of the lamp in a base down operating position by providing horizontal and vertical insulating septums positioned in the ballast compartment of the lamp to provide a cooler coldspot. Selective convective venting provides additional cooling of the ballast compartment. 9 figs.

Siminovitch, M.

1998-02-10T23:59:59.000Z

135

Compact fluorescent lamp using horizontal and vertical insulating septums and convective venting geometry  

SciTech Connect

A novel design for a compact fluorescent lamp, including a lamp geometry which will increase light output and efficacy of the lamp in a base down operating position by providing horizontal and vertical insulating septums positioned in the ballast compartment of the lamp to provide a cooler coldspot. Selective convective venting provides additional cooling of the ballast compartment.

Siminovitch, Michael (El Sobrante, CA)

1998-01-01T23:59:59.000Z

136

Studies on Temperature Dependence of Rubidium Lamp for Atomic Frequency Standard  

Science Conference Proceedings (OSTI)

Rb lamp is a very critical component of the Rb atomic clock's Physics Package. The Rb lamp's performance is very sensitive to temperature and its stability. In this paper we discuss the behaviors of Rb Lamp with temperature. The Rb lamp exciter power and temperature of Rb bulb are very important parameters in controlling the performance of the Rb Lamp. It is observed that at temperatures beyond 110 deg. C, the lamp mode changes from the ring to red mode resulting in abnormal broadening of emission lines and self reversal. The results of our studies on spectral analysis of Rb lamp under various operating conditions are reported in the paper.

Ghosal, Bikash; Banik, Alak; Vats, Vaibhav; Pal, Sukamal; Bahl, R. K [Space Applications Centre, ISRO, Ahmedabad-380015 (India)

2011-10-20T23:59:59.000Z

137

THE EFFECT OF A MINIMUM WEIGHT RADIAL REFLECTOR ON SNAP SHIELDING REQUIREMENTS  

SciTech Connect

A model was derived for a minimum-weight radial reflector for SNAP reactors. The effect, which the use of this optimal reflector has on radiation shield weight requirements is investigated. Weights of systems employing conventional and optimal radial reflectors are compared using the FARSE and FARSER computer codes. It is found that for the configuration under study additional shield weight required when the optimal reflector is used is in excess of the reflector weight savings. (auth)

Bernick, R.L.

1963-10-17T23:59:59.000Z

138

Fig. 1. Artist's concept of the 1-D parabolic cylinder reflector. The re-flector has a parabolic shape in the short dimension and a flat profile in  

E-Print Network (OSTI)

Fig. 1. Artist's concept of the 1-D parabolic cylinder reflector. The re- flector has a parabolic [1]. A stationary linear parabolic reflector with a diameter of 1.6 m and a length of 2 m would

Ruf, Christopher

139

PARS II Training Materials | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Training Materials Training Materials PARS II Training Materials PARS II presentation hand-outs and step-by-step "how to" exercises for each course are available for download. Users who are attending Web classes should download these documents prior to attending the class. Slides from the APM "Road Show" Earned Value (EV) Analysis and Project Assessment & Reporting System (PARS II) PARS 102 - Monthly Updating and Reporting Introduction to PARS II, finding and selecting projects in your domain, viewing Oversight and Assessment (OA) data, viewing Contractor Project Performance (CPP) dashboards, updating your monthly status assessment, adding attachments, and running standard, pre-built reports. PARS 102 Presentation PARS 102 Workbook PARS 103 - Updating Projects and Reporting

140

PARS II Training | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

II Training PARS II Training PARS II training is delivered as traditional, instructor-led, hands-on classroom training, and also, as instructor-led Webinars with limited...

Note: This page contains sample records for the topic "reflector par lamps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Very high efficacy electrodeless high intensity discharge lamps  

DOE Patents (OSTI)

An electrodeless arc lamp comprises an outer jacket hermetically sealing and thermally protecting an arc tube inside which has an upwardly convex bottom center section. The absence of chemically reactive electrode material makes it possible to use metal halides other than iodides. The tube contains chlorides, bromides or a mixture thereof of scandium and sodium in a nearly equimolar relationship in addition to mercury and an inert gas. Good color balance can be obtained at reduced reservoir temperature and with less power loss. Reduction in wall temperature makes it possible to attain longer lamp life.

Johnson, P.D.

1985-10-03T23:59:59.000Z

142

PARS II 104 Contractor Monthly Upload  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

July 7, 2011 (V1.3) July 7, 2011 (V1.3) PARS II 104 Contractor Monthly Upload 2 July 7, 2011 (V1.3) PARS II 104 Contractor Monthly Upload Course Objectives * Upon completion of this course, users will be able to: - Navigate in the PARS II application - Select a Project to update - Update Project data by performing * An Upload of the latest monthly project performance data extracted from the contractor's local Earned Value Management System (EVMS) * Replace the current or a prior monthly upload in response to feedback or to correct data - Verify the success of the upload - View and interpret the import log generated by the upload process 3 July 7, 2011 (V1.3) PARS II 104 Contractor Monthly Upload Overview PARS II 4 July 7, 2011 (V1.3) PARS II 104 Contractor Monthly Upload PARS II Overview * Commercial-off-the-shelf (COTS) product

143

AlP/GaP distributed Bragg reflectors  

SciTech Connect

Distributed Bragg reflectors with high reflectivity bands centered at wavelengths from 530 to 690 nm (green to red) based on AlP/GaP quarter-wave stacks are prepared on (001)GaP using gas-source molecular-beam epitaxy. Additionally, the complex refractive index of AlP is measured using spectroscopic ellipsometry within the range of 330-850 nm in order to facilitate an accurate reflector design. Structures consisting of 15 quarter-wave stacks reach a peak reflectance between 95% and 98%, depending on the spectral position of the maximum.

Emberger, Valentin; Hatami, Fariba; Ted Masselink, W. [Department of Physics, Humboldt-Universitaet zu Berlin, Newtonstrasse 15, D-12489 Berlin (Germany); Peters, Sven [Sentech Instruments GmbH, Schwarzschildstr. 2, 12489 Berlin (Germany)

2013-07-15T23:59:59.000Z

144

Ion beam characterization of multi-layer dielectric reflectors  

Science Conference Proceedings (OSTI)

Energetic ion beams were used to characterize multilayer dielectric reflectors. Alpha-particle beams with beam spot sizes between 10 microns and a few millimeters were scattered from reflectors consisting of 32-layer SiO/sub 2//HfO/sub 2/ and 38-layer MgF/sub 2//ThF/sub 4/. The RBS spectra reveal the nature of the laser damage processes by providing information on diffusion, mixing, and loss of material in the coatings. The particle-induced x-ray emission (PIXE) technique gave complimentary results on low-concentration impurities in the coatings.

Beery, J.G.; Hollander, M.G.; Maggiore, C.J.; Redondo, A.; Westervelt, R.T.; Taylor, T.N.

1985-01-01T23:59:59.000Z

145

PARS II 102 Training Workbook  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 Monthly Updating and Reporting 2 Monthly Updating and Reporting Training Workbook V8.0.20101108 Department of Energy March 30, 2011 March 30, 2011 PARS II 102 Monthly Updating and Reporting V8.0.20101108 ii Table of Contents OVERSIGHT and ASSESSMENT ........................................................................................................ 1 Exercise 1 - Find and View a Project............................................................................................ 1 Sort the Project List ................................................................................................................. 3 Select a Project ........................................................................................................................ 4 View a Project ......................................................................................................................... 4

146

Dual annular rotating [open quotes]windowed[close quotes] nuclear reflector reactor control system  

DOE Patents (OSTI)

A nuclear reactor control system is provided in a nuclear reactor having a core operating in the fast neutron energy spectrum where criticality control is achieved by neutron leakage. The control system includes dual annular, rotatable reflector rings. There are two reflector rings: an inner reflector ring and an outer reflector ring. The reflectors are concentrically assembled, surround the reactor core, and each reflector ring includes a plurality of openings. The openings in each ring are capable of being aligned or non-aligned with each other. Independent driving means for each of the annular reflector rings is provided so that reactor criticality can be initiated and controlled by rotation of either reflector ring such that the extent of alignment of the openings in each ring controls the reflection of neutrons from the core. 4 figures.

Jacox, M.G.; Drexler, R.L.; Hunt, R.N.M.; Lake, J.A.

1994-03-29T23:59:59.000Z

147

New LED light sources and lamps for general illumination  

E-Print Network (OSTI)

of light source compared to traditional light sources like incandescent bulbs and fluorescent tubes bulb. LEDs emit colored light with a narrow spectral band of 20-30 nm, colors covering the spectralNew LED light sources and lamps for general illumination Carsten Dam-Hansen, Birgitte Thestrup

148

The Energy Efficiency of the U.S Fluorescent Lamp Ballast Industry  

NLE Websites -- All DOE Office Websites (Extended Search)

The Energy Efficiency of the U.S Fluorescent Lamp Ballast Industry The Energy Efficiency of the U.S Fluorescent Lamp Ballast Industry Speaker(s): Francis Rubinstein Date: February 14, 2008 - 12:00pm Location: 90-3122 Fluorescent lamp ballasts are subject to DOE appliance standards and rulemaking. But currently, only ballasts for older fluorescent lamp types, such as T-12 lamps are subject to minimum efficacy limits. The majority of fluorescent lamps now being shipped (T-8 and T-5 types) type are operated by ballasts that will not be subject to DOE rule until 2011. The metric used by DOE for characterizing the electrical efficiency of the fluorescent lamp-ballast system is called Ballast Efficacy Factor (BEF). Because BEF is not normalized, it is of limited utility for rulemaking and is useless for procurement. But by normalizing BEF to the total lamp power, I have

149

Solid-State Lighting: LED Replacement Lamps: Current Performance and the  

NLE Websites -- All DOE Office Websites (Extended Search)

LED Replacement Lamps: Current LED Replacement Lamps: Current Performance and the Latest on ENERGY STAR® to someone by E-mail Share Solid-State Lighting: LED Replacement Lamps: Current Performance and the Latest on ENERGY STAR® on Facebook Tweet about Solid-State Lighting: LED Replacement Lamps: Current Performance and the Latest on ENERGY STAR® on Twitter Bookmark Solid-State Lighting: LED Replacement Lamps: Current Performance and the Latest on ENERGY STAR® on Google Bookmark Solid-State Lighting: LED Replacement Lamps: Current Performance and the Latest on ENERGY STAR® on Delicious Rank Solid-State Lighting: LED Replacement Lamps: Current Performance and the Latest on ENERGY STAR® on Digg Find More places to share Solid-State Lighting: LED Replacement Lamps: Current Performance and the Latest on ENERGY STAR® on

150

Observed Minimum Illuminance Threshold for Night Market Vendors in Kenya who use LED Lamps  

E-Print Network (OSTI)

the economics of fuel-based and LED lighting technology fordata logger equipped rechargeable LED lamps, monitoring theadoption of the LED lamps, and a follow-up survey. 1 Figure

Johnstone, Peter

2009-01-01T23:59:59.000Z

151

Information on the Fate of Mercury From Fluorescent Lamps Disposed in Landfills  

Science Conference Proceedings (OSTI)

Mercury is contained in energy-efficient fluorescent, mercury-vapor, metal halide, and high-pressure sodium lamps. This report presents information on the potential for air and groundwater contamination when mercury lamps are disposed in municipal landfills.

1995-04-19T23:59:59.000Z

152

Step-Stress Accelerated Degradation Testing for Solar Reflectors: Preprint  

DOE Green Energy (OSTI)

To meet the challenge to reduce the cost of electricity generated with concentrating solar power (CSP) new low-cost reflector materials are being developed including metalized polymer reflectors and must be tested and validated against appropriate failure mechanisms. We explore the application of testing methods and statistical inference techniques for quantifying estimates and improving lifetimes of concentrating solar power (CSP) reflectors associated with failure mechanisms initiated by exposure to the ultraviolet (UV) part of the solar spectrum. In general, a suite of durability and reliability tests are available for testing a variety of failure mechanisms where the results of a set are required to understand overall lifetime of a CSP reflector. We will focus on the use of the Ultra-Accelerated Weathering System (UAWS) as a testing device for assessing various degradation patterns attributable to accelerated UV exposure. Depending on number of samples, test conditions, degradation and failure patterns, test results may be used to derive insight into failure mechanisms, associated physical parameters, lifetimes and uncertainties. In the most complicated case warranting advanced planning and statistical inference, step-stress accelerated degradation (SSADT) methods may be applied.

Jones, W.; Elmore, R.; Lee, J.; Kennedy, C.

2011-09-01T23:59:59.000Z

153

Long-Life Self-Renewing Solar Reflector Stack  

DOE Patents (OSTI)

A long-life solar reflector includes a solar collector substrate and a base layer bonded to a solar collector substrate. The first layer includes a first reflective layer and a first acrylic or transparent polymer layer covering the first reflective layer to prevent exposure of the first reflective layer. The reflector also includes at least one upper layer removably bonded to the first acrylic or transparent polymer layer of the base layer. The upper layer includes a second reflective layer and a second acrylic or transparent polymer layer covering the second reflective layer to prevent exposure of the second reflective layer. The upper layer may be removed from the base reflective layer to expose the base layer, thereby lengthening the useful life of the solar reflector. A method of manufacturing a solar reflector includes the steps of bonding a base layer to a solar collector substrate, wherein the base reflective layer includes a first reflective layer and a first transparent polymer or acrylic layer covering the first reflective layer; and removably bonding a first upper layer to the first transparent polymer or acrylic layer of the base layer. The first upper layer includes a second reflective layer and a second transparent polymer or acrylic layer covering the second reflective layer to prevent exposure of the second reflective layer.

Butler, Barry Lynn (Solana Beach, CA)

1997-07-08T23:59:59.000Z

154

Beam spoiling a reflector antenna with conducting shim.  

SciTech Connect

A horn-fed dish reflector antenna has characteristics including beam pattern that are a function of its mechanical form. The beam pattern can be altered by changing the mechanical configuration of the antenna. One way to do this is with a reflecting insert or shim added to the face of the original dish.

Doerry, Armin Walter

2012-12-01T23:59:59.000Z

155

Mercury Lamps Recycling Fluorescent light-tubes, compact fluorescent bulbs, mercury and sodium vapor lamps, ultraviolet and  

E-Print Network (OSTI)

Mercury Lamps Recycling Fluorescent light-tubes, compact fluorescent bulbs, mercury and sodium light tubes are recycled. They are made from aluminum and metal. Aluminum is a silver-white metal and is very light in weight and strong. Because aluminum is ductile, it can be drawn into wires or pressed

Ungerleider, Leslie G.

156

PARS II Course Descriptions | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Descriptions Descriptions PARS II Course Descriptions Sign up for PARS 102 or PARS 103, depending on your project assessment role and function. PARS 104 will be offered to site contractors as part of Dekker's Contractor deployment training. # Course Name Course Description Intended Audience PARS 102 Monthly Updating and Reporting Duration: 4 hrs Introduction to PARS II, finding and selecting projects in your domain, viewing Oversight and Assessment (OA) data, viewing Contractor Project Performance (CPP) dashboards, updating your monthly status assessment, adding attachments, and running standard, pre-built reports. Individuals who do not require monthly update training will be excused approximately one half hour early. FPD and Program staff who update the OA Monthly Status, but not other OA data.

157

Thermal element for maintaining minimum lamp wall temperature in fluorescent fixtures  

DOE Patents (OSTI)

In a lighting fixture including a lamp and a housing, an improvement is disclosed for maintaining a lamp envelope area at a cooler, reduced temperature relative to the enclosed housing ambient. The improvement comprises a thermal element in thermal communication with the housing extending to and springably urging thermal communication with a predetermined area of the lamp envelope surface.

Siminovitch, Michael J. (Richmond, CA)

1992-01-01T23:59:59.000Z

158

Thermal element for maintaining minimum lamp wall temperature in fluorescent fixtures  

DOE Patents (OSTI)

In a lighting fixture including a lamp and a housing, an improvement is disclosed for maintaining a lamp envelope area at a cooler, reduced temperature relative to the enclosed housing ambient. The improvement comprises a thermal element in thermal communication with the housing extending to and springably urging thermal communication with a predetermined area of the lamp envelope surface. 12 figs.

Siminovitch, M.J.

1992-11-10T23:59:59.000Z

159

Inrush related problems caused by lamps with electronic drivers and their mitigation  

Science Conference Proceedings (OSTI)

New types of appliances sometimes bring unexpected power quality problems. On several locations it was reported that energy-saving lamps cause random false tripping of circuit breakers. In all of these cases these lamps had electronic drivers. An investigation ... Keywords: energy-saving lamp, false tripping, inrush, mitigation, power quality

Vladimir ?uk; Joseph F. G. Cobben; Wil L. Kling

2011-07-01T23:59:59.000Z

160

SunShot Initiative: Next-Generation Low-Cost Reflector  

NLE Websites -- All DOE Office Websites (Extended Search)

Next-Generation Low-Cost Next-Generation Low-Cost Reflector to someone by E-mail Share SunShot Initiative: Next-Generation Low-Cost Reflector on Facebook Tweet about SunShot Initiative: Next-Generation Low-Cost Reflector on Twitter Bookmark SunShot Initiative: Next-Generation Low-Cost Reflector on Google Bookmark SunShot Initiative: Next-Generation Low-Cost Reflector on Delicious Rank SunShot Initiative: Next-Generation Low-Cost Reflector on Digg Find More places to share SunShot Initiative: Next-Generation Low-Cost Reflector on AddThis.com... Concentrating Solar Power Systems Components Competitive Awards CSP Research & Development Thermal Storage CSP Recovery Act Baseload CSP SunShot Multidisciplinary University Research Initiative CSP Heat Integration for Baseload Renewable Energy Deployment

Note: This page contains sample records for the topic "reflector par lamps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

L Prize Competition Winner 60W Incandesent Replacement Lamp Update  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technology Deployment Technology Deployment Working Group L Prize ® Competition Winner 60W Incandescent Replacement Lamp Update James E. Rannels, Senior Advisor L Prize Competition D&R International May 23, 2012 Philips Wins First L Prize 2 * August 3, 2011: Philips announced as winner of 60W replacement bulb category * Product distributed thru commercial and retail channels Image courtesy of Philips -...[O]nce an award is made the authorizing Act directs General Services Administration to develop federal purchasing schedules for solid-state lamps that meet or exceed the specifications laid out in the prize category-so long as it is cost effective. I hope the GSA begins this process soon.‖

162

DuraLamp USA: Proposed Penalty (2010-CE-0912) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DuraLamp USA: Proposed Penalty (2010-CE-0912) DuraLamp USA: Proposed Penalty (2010-CE-0912) DuraLamp USA: Proposed Penalty (2010-CE-0912) September 9, 2010 DOE alleged in a Notice of Proposed Civil Penalty that DuraLamp USA, Inc. failed to certify a variety of general service fluorescent lamps as compliant with the applicable energy conservation standards. DOE regulations require a manufacturer (which includes importers) to submit reports certifying that its products have been tested and meet the applicable energy conservation standards. This civil penalty notice advises the company of the potential penalties and DOE's administrative process, including the company's right to a hearing. DuraLamp USA: Proposed Penalty (2010-CE-0912) More Documents & Publications DuraLamp USA: Order (2010-CE-0912)

163

Energy-efficient compact screw-in fluorescent lamp. Final report  

SciTech Connect

A compact fluorescent lamp has been designed and constructed which can replace an incandescent lamp. The lamp is slightly larger than a standard lamp (8 3/4 in. x 3 1/4 in.), but is designed to fit a majority of portable lamp applications. This version, with a core-coil ballast, results in a system efficacy of 54 lumens per watt, with a light output of more than 1800 lumens. This compares favorably with a 100-watt incandescent (17.5 lumens per watt and 1750 lumens light output). The color temperature of 3000/sup 0/K is compatible with an incandescent lamp (2800/sup 0/K). The color rendition index (CRI) is 84. With a solid-state ballast, the efficacy and light output could be increased by 20% (65 l/w, 2200 lumens) and could provide a direct replacement for a three-way, 150-watt incandescent lamp (15 l/w, 2200 lumens).

Morton, E.W.

1982-11-01T23:59:59.000Z

164

Performance of electronic ballasts and lighting controllers with 34-W fluorescent lamps: Final report  

SciTech Connect

This study has measured the performance of energy-saving 34-watt F40, T-12, rapid-start, lite white fluorescent lamps being operated by solid-state ballasts and lighting control equipment. The performances of these lamps are compared with those of 40-watt F40, T-12 rapid-start cool white fluorescent lamp systems studied in the prior phase of this project. With the 34-watt F40 lamps and various solid-state ballasts, system efficacy ranged from 67 to 84 lumens per watt and ballast factor from 0.756 to 0.908. Average system efficacy using the 34-watt lamps exceeded that of systems using 40-watt lamps and the same solid-state ballasts by only 1 percent even though the 34-watt lamps is about 6 percent more efficacious than the 40-watt lamp. This apparent discrepancy is due to increased ballast losses when operating the 34-watt lamps. However, the system efficacy of the 34-watt lamps used with a solid-state ballast exceeded that of a 34-watt, two-lamp system using the standard core-coil ballast by as much as 29 percent. A T-8 fluorescent lamp system with a smaller lamp diameter was also included in the study. Operating this lamp with a solid-state ballast produced a high system efficacy of 90 lumens per watt, a 39 percent improvement over the efficacy of a 40-watt F40 system using the standard core-coil ballast. The use of static controllers with 34-watt F40 lamps can result in excessive flickering (46 percent) and the generation of a second harmonic as high as 96 percent of the fundamental frequency. The dynamic controllers, when used to dim the 34-watt lamps generally cannot be dimmed as low as the 40-watt lamp system without flickering. In general, the 34-watt energy-saving lamps are appropriate as a retrofit to reduce illumination levels. However, for new construction, the 40-watt F40 argon filled lamps cost less, perform better, and provide a more reliable system. 5 refs., 27 figs., 9 tabs.

Verderber, R.R.

1988-06-01T23:59:59.000Z

165

PARS II Change Request (CR) Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Title: Phone #: Office/Symbol: Email: CHANGE TYPE: Defect: New Requirement: PRIORITY: PARS II Change Request Form (APR 2011) PARS II Change Request (CR) Form 1 = Prevents the accomplishment of an essential PARS-II capability 3 = Adversely affects the accomplishment of an essential PARS-II capability, but a work-around solution is known 4 = Results in User / Operator inconvenience or annoyance, but does not affect an essential PARS-II capability 5 = Any other effect 1) Detailed description of problem/need. (If possible, provide project #(s) you are working with). PROBLEM/CHANGE DESCRIPTION: 2) Where in system defect is seen or where new functionality is required (i.e., which screen, which report). Screenshots (as separate attachments) are helpful.

166

PARS II Process Document- Submitting & Processing Email as Offical...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PARS II Process Document- Submitting & Processing Email as Offical Project Action Approval Document PARS II Process Document- Submitting & Processing Email as Offical Project...

167

PARS II Process Document - Over Target Baseline (OTB) Reporting...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PARS II Process Document - Over Target Baseline (OTB) Reporting PARS II Process Document - Over Target Baseline (OTB) Reporting This document details the process by which...

168

Contractor-specific Documentation & Information in PARS II |...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Contractor-specific Documentation & Information in PARS II Contractor-specific Documentation & Information in PARS II DOE Office of Acquisition and Project Management established...

169

PARS II Process Document - Project Phasing (Multiple CD-2 from...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PARS II Process Document - On Hold Projects.pdf More Documents & Publications ESAAB SOP Requirements to coordinate agreements, milestones and decision documents (AMDD) PARS II...

170

PARS II CPP Upload Template File | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

File PARS II CPP Upload Template File DPMIS091110OECMCompleteProjectTemplate.zip More Documents & Publications Microsoft Word - PARS II CPP Upload Requirements.docx...

171

Configuring Workstations for use with the PARS II System | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Configuring Workstations for use with the PARS II System Configuring Workstations for use with the PARS II System ConfiguringWorkstationsforusewiththePARSIISystem0.pdf...

172

Configuring Workstations for use with the PARS II System | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Configuring Workstations for use with the PARS II System Configuring Workstations for use with the PARS II System ConfiguringWorkstationsforusewiththePARSIISystem2013071...

173

Project Assessment and Reporting System (PARS II) | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

byDeputySecretaryPoneman17May2010.pdf More Documents & Publications Earned Value (EV) Analysis and Project Assessment & Reporting System (PARS II) PARS II Data Quality...

174

PARS II Earned Value Data Migration Template | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Data Migration Template PARSITEMPLATE.xls More Documents & Publications Earned Value (EV) Analysis and Project Assessment & Reporting System (PARS II) PARS II CPP Upload...

175

Performance of T12 and T8 Fluorescent Lamps and Troffers and LED Linear Replacement Lamps CALiPER Benchmark Report  

Science Conference Proceedings (OSTI)

The Department of Energy (DOE) Commercially Available LED Product Evaluation and Reporting (CALiPER) Program was established in 2006 to investigate the performance of light-emitting diode (LED) based luminaires and replacement lamps. To help users better compare LED products with conventional lighting technologies, CALiPER has also performed benchmark research and testing of traditional (i.e., non-LED) lamps and fixtures. This benchmark report addresses standard 4-foot fluorescent lamps (i.e., T12 and T8) and the 2-foot by 4-foot recessed troffers in which they are commonly used. This report also examines available LED replacements for T12 and T8 fluorescent lamps, and their application in fluorescent troffers. The construction and operation of linear fluorescent lamps and troffers are discussed, as well as fluorescent lamp and fixture performance, based on manufacturer data and CALiPER benchmark testing. In addition, the report describes LED replacements for linear fluorescent lamps, and compares their bare lamp and in situ performance with fluorescent benchmarks on a range of standard lighting measures, including power usage, light output and distribution, efficacy, correlated color temperature, and the color rendering index. Potential performance and application issues indicated by CALiPER testing results are also examined.

Myer, Michael; Paget, Maria L.; Lingard, Robert D.

2009-01-16T23:59:59.000Z

176

Conservation potential of compact fluorescent lamps in India and Brazil  

SciTech Connect

We evaluate the conservation potential of compact fluorescent lamps (CFLs) for managing the rapidly increasing electrical energy and peak demand in India and Brazil. Using very conservative assumptions, we find that the cost of conserved energy using 16 W CFLs is 4 and 6 times less than the long range marginal cost of electricity for the two countries. The cost of avoided peak installed capacity is 6 and 9.5 times less than the cost of new installed capacity for India and Brazil. The analysis is undertaken from the three separate perspectives of the national economies, the consumers, and the utilities. We find that because residential electricity is subsidized, the consumers have little or no incentive to purchase and install the CFLs, unless they too are subsidized. However, the benefits of CFL installation to the utility are so large that subsidizing them is a paying proposition for the utility are so large that subsidizing them is a paying proposition for the utility in almost all cases. As an illustration of a gradual introduction strategy for CFLs, we calculate a scenario where national savings of the order of US $1.2 million per day for India and US $2.5 million per day for Brazil are reached in 10 years by a small and gradual transfer of subsidy from residential electricity to CFLs. We then explore the barriers to immediate large scale introduction of these lamps in the two countries. Specific technical and marketing problems are identified and discussed, which would require solution before such an introduction can be attempted. Lastly, we discuss the range of policy instruments, in addition to a subsidy scheme, that can be used for promoting the diffusion of these lamps in the domestic and commercial sector. 47 refs., 15 figs., 2 tabs.

Gadgil, A.; Martino Jannuzzi, G. de (Lawrence Berkeley Lab., CA (USA); Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia)

1989-07-01T23:59:59.000Z

177

Energy efficiency lighting on board naval ships: Phase 2 (The T-8 lamp system)  

SciTech Connect

This report describes the development and performance of the T-8 fluorescent lamp-ballast system. Similar to the Phase I effort, the cooperation of the lamp and ballast companies (GTE, North American Philips Lighting, and IOTA Engineering) were required for the successful result. The above companies submitted prototype lamps and ballasts to the Lawrence Berkeley Laboratory Lighting Group to evaluate. The lamp designs were modified as required and the optimum system selected. Two-lamp designs and one ballast were chosen and tested to determine if they met the Navy specifications. The second section describes the lamp-ballast specifications. This section includes the measured thermal performance from an ambient of 10/degree/C to 60/degree/C. 1 ref., 8 figs., 11 tabs.

Verderber, R.R.

1987-01-31T23:59:59.000Z

178

Microwave lamp with multi-purpose rotary motor  

DOE Patents (OSTI)

In a microwave powered electrodeless lamp, a single rotary motor is used to (a) rotate the bulb and (b) provide rotary motion to a blower or pump means for providing cooling fluid to the magnetron and/or to a forced gas cooler for providing cooling gas to the bulb. The blower may consist of only of an impeller without the usual blower housing. The motor, bulb stem and bulb, or motor, bulb stem, bulb and blower may be formed as an integral unit so as to facilitate replacement. 8 figs.

Ury, M.G.; Turner, B.; Wooten, R.D.

1999-02-02T23:59:59.000Z

179

Microwave lamp with multi-purpose rotary motor  

DOE Patents (OSTI)

In a microwave powered electrodeless lamp, a single rotary motor is used to a) rotate the bulb and b) provide rotary motion to a blower or pump means for providing cooling fluid to the magnetron and/or to a forced gas cooling for providing cooler gas to the bulb. The blower may consist of only of an impeller without the usual blower housing. The motor, bulb stem and bulb, or motor, bulb stem, bulb and blower may be formed as an integral unit so as to facilitate replacement.

Ury, Michael G. (Bethesda, MD); Turner, Brian (Myersville, MD); Wooten, Robert D. (Rockville, MD)

1999-01-01T23:59:59.000Z

180

Low pressure arc discharge lamp apparatus with magnetic field generating means  

DOE Patents (OSTI)

A low-pressure arc discharge apparatus having a magnetic field generating means for increasing the output of a discharge lamp is disclosed. The magnetic field generating means, which in one embodiment includes a plurality of permanent magnets, is disposed along the lamp for applying a constant transverse magnetic field over at least a portion of the positive discharge column produced in the arc discharge lamp operating at an ambient temperature greater than about 25 C. 3 figs.

Grossman, M.W.; George, W.A.; Maya, J.

1987-10-06T23:59:59.000Z

Note: This page contains sample records for the topic "reflector par lamps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

PAR solar radiation | OpenEI  

Open Energy Info (EERE)

PAR solar radiation PAR solar radiation Dataset Summary Description (Abstract): Mean values of PAR Solar Radiation in kWh/m2/day for 40km cells for 1 year (month, season, year) based on data from 1995 to 2005 (Purpose): To provide a set of consistent, reliable, verifiable, and accessible global data sets for international and in-country investors and other stakeholders Source INPE (National Institute for Spatial Research) and LABSOLAR (Laboratory of Solar Energy/Federal University of Santa Catarina) - Brazil Date Released August 05th, 2009 (5 years ago) Date Updated August 05th, 2009 (5 years ago) Keywords INPE LABSOLAR PAR solar radiation renewable energy South America SWERA UNEP Data application/zip icon Download Shapefile (zip, 977.7 KiB) text/csv icon Download Data (csv, 1.8 MiB)

182

PARS II User Account Access Guide  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Office of Management Office of Management Office of Engineering and Construction Management User Account Access Guide for PARS II Version 1.5 June 25, 2011 Submitted by: Energy Enterprise Solutions 20440 Century Blvd. Suite 150 Germantown, MD 20874 Phone 301-916-0050 Fax 301-916-0066 www.eesllc.net June 25, 2011 (V1.5) PARS II User Account Access Guide ii This page intentionally left blank. June 25, 2011 (V1.5) PARS II User Account Access Guide iii Title Page Document Name: User Account Access Guide for PARS II Version Number: V1.5 Publication Date: June 25, 2011 Contract Number: DE-AT01-06IM00102 Project Number: 1ME07 CLIN 4 Prepared by: Scott Burns, Energy Enterprise Solutions, LLC Reviewed by: Judith Bernsen, Energy Enterprise Solutions, LLC

183

PARS II - Integrated Project Team Meeting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

John Makepeace (OECM) Kai Mong (EES), Ken Henderson (EES), Norm Ayers (EES) October 29, 2009 2 2 Agenda * PARS II OA & CPP Software * PARS II Deployment Timeline * Deployment Overview * Organizational Roles & Responsibilities * Project List and Schedule * Next Steps 3 PARS II OA & CPP Software * Oversight & Assessment (OA) * Web interface collects summary-level project data: status assessments, forecasts, PB, KPPs * Used by FPD, Program and OECM each month * Contractor Project Performance (CPP) * Web interface for uploading contractor's project files: earned value, schedule, variance, MR, risk * Used by contractor each month 4 PARS II Deployment Timeline 4 11/1/2009 12/1/2009 1/1/2010 2/1/2010 3/1/2010 4/1/2010 5/1/2010 6/1/2010 7/1/2010 8/1/2010 9/1/2010 10/1/2010 11/1/2010

184

Variational Approach for Predicting the Load Deformation Response of a Double Stretched Membrane Reflector Module  

DOE Green Energy (OSTI)

This report presents an analytical model useful for design and sizing purposes to describe the load deformation response of a stretched membrane reflector module structural system.

Murphy, L. M.

1985-10-01T23:59:59.000Z

185

Observed Minimum Illuminance Threshold for Night Market Vendors in Kenya who use LED Lamps  

E-Print Network (OSTI)

for Small Businesses in Kenya." Lumina Project Technicalfor Night Market Vendors in Kenya who use LED Lamps Petermany people and businesses in Kenya who participated in this

Johnstone, Peter

2009-01-01T23:59:59.000Z

186

Demonstration of LED Retrofit Lamps at the Smithsonian American Art Museum, Washington, DC  

Science Conference Proceedings (OSTI)

This report documents observations and results obtained from a lighting demonstration project conducted under the U.S. Department of Energy GATEWAY Solid-State Lighting (SSL) Technology Demonstration Program at the Smithsonain American Art Museum in Washington, DC. LED Lamp samples were tested in the museum workshop, temporarily installed in a gallery for feedback, and ultimately replaced all traditional incandescent lamps in one gallery of modernist art at the American Art Museum and partially replacing lamps in two galleries at the Musesum's Renwick Gallery. This report describes the selection and testing process, technology challenges, perceptions, economics, energy use, and mixed results of usign LED replacement lamps in art galleries housing national treasures.

Miller, Naomi J.; Rosenfeld, Scott M.

2012-06-22T23:59:59.000Z

187

Guidance Concerning Enforcement of EISA 2007 Standards Candelabra Base and Intermediate Base Lamps  

Energy.gov (U.S. Department of Energy (DOE))

The Energy Independence and Security Act of 2007 (EISA 2007) imposed energy conservation standards for candelabra and intermediate base lamps, and those provisions became effective with the statute.

188

Dimming of Compact Fluorescent Lamps Caused By Cold-Air Drafts  

Science Conference Proceedings (OSTI)

This Case Study documents the investigation performed by the New York Port Authority (PA) of the dimming of compact fluorescent lamps (CFLs) in the World Trade Center.

2003-12-31T23:59:59.000Z

189

Power control architectures for cold cathode fluorescent lamp and light emitting diode based light sources.  

E-Print Network (OSTI)

?? In this dissertation, two different energy efficient power supply topologies are introduced for controlling cold cathode fluorescent lamp (CCFL) and high-brightness light emitting diode… (more)

Doshi, Montu V.

2010-01-01T23:59:59.000Z

190

A new optimized fluorescent lamp and ballast for low-energy general lighting applications  

SciTech Connect

A new fluorescent lamp and ballast system has been developed which minimizes system input power while maintaining light output close to values provided by conventional lamps and ballasts. The 28-WT-12 lamp designed for the new system utilizes a redesigned electrode structure which allows the lamp to be started in the rapid start manner but operated in an instant start mode to maximize the discharge efficacy (lumens/watt) while reducing lamp cathode power requirements. A matching two-lamp ballast incorporates a solid-state switching device to turn off the cathode heating circuit automatically once the lamps have started. Both lamps and ballasts are physically interchangeable with conventional equipment so that existing luminaires can be converted without luminaire, lampholder, and wiring modifications. This new lamp/ballast system can achieve efficacy values exceeding 80 lm/W--more than 25 percent better than the performance of conventional fluorescent systems of the early 1970's-along with the excellent life and reliability characteristics typical of electromagnetically ballasted systems. Economic analyses indicate that the new system is appropriate for many new commercial general lighting installations, although it is particularly suitable as a retrofit system for installations where power reductions are essential but where conversion costs must be minimized and illumination levels preserved.

Hammer, E.E.; McGowan, T.K.

1983-07-01T23:59:59.000Z

191

The effects of supply harmonics on the performance of compact fluorescent lamps  

SciTech Connect

This paper describes a performance evaluation of ten compact fluorescent lighting systems operated with sinusoidal and distorted voltage waveform conditions. The lamps were either provided with an electronic ballast, a magnetic core ballast or a magnetic core ballast with a power factor correction circuit. The test results show that the electrical performance of the compact fluorescent lamps for both sinusoidal and distorted voltage waveform operation is related to the different types of ballast used. The cost of operation of these compact fluorescent lamps was calculated and compared to the cost of a conventional 60 W incandescent lamp.

Arseneau, R.; Ouellette, M.

1993-04-01T23:59:59.000Z

192

Simulink/PARS Integration Support  

SciTech Connect

The state of the art for signal processor hardware has far out-paced the development tools for placing applications on that hardware. In addition, signal processors are available in a variety of architectures, each uniquely capable of handling specific types of signal processing efficiently. With these processors becoming smaller and demanding less power, it has become possible to group multiple processors, a heterogeneous set of processors, into single systems. Different portions of the desired problem set can be assigned to different processor types as appropriate. As software development tools do not keep pace with these processors, especially when multiple processors of different types are used, a method is needed to enable software code portability among multiple processors and multiple types of processors along with their respective software environments. Sundance DSP, Inc. has developed a software toolkit called “PARS”, whose objective is to provide a framework that uses suites of tools provided by different vendors, along with modeling tools and a real time operating system, to build an application that spans different processor types. The software language used to express the behavior of the system is a very high level modeling language, “Simulink”, a MathWorks product. ORNL has used this toolkit to effectively implement several deliverables. This CRADA describes this collaboration between ORNL and Sundance DSP, Inc.

Vacaliuc, B. [ORNL] [ORNL; Nakhaee, N. [Sundance DSP, Inc.] [Sundance DSP, Inc.

2013-12-18T23:59:59.000Z

193

Protective coatings for front surface reflectors. Phase I, final report  

DOE Green Energy (OSTI)

Silicone resins were evaluated as protective coatings for front surface aluminum and silver reflectors. The solar weighted hemispherical reflectances and specular reflectances of float glass squares metallized with silver and aluminum and protected with silicone coatings were measured. The float glass squares metallized with silver and aluminum were highly reflective. The total reflectances of the silver samples were 5 to 7% higher than the aluminized samples. The resin coated aluminum samples were much more specular than the silver samples. Coupling agents used to improve the adhesion of the protective silicone resin coating to the silver surface adversely affected the specularities.

Dennis, W.E.

1979-09-01T23:59:59.000Z

194

Optical device with low electrical and thermal resistance bragg reflectors  

DOE Patents (OSTI)

A compound-semiconductor optical device and method. The optical device is provided with one or more asymmetrically-graded heterojunctions between compound semiconductor layers for forming a distributed Bragg reflector mirror having an improved electrical and thermal resistance. Efficient light-emitting devices such as light-emitting diodes, resonant-cavity light-emitting diodes, and vertical-cavity surface-emitting lasers may be formed according to the present invention, which may be applied to the formation of resonant-cavity photodetectors.

Lear, Kevin L. (Albuquerque, NM)

1996-01-01T23:59:59.000Z

195

VSHOT: a tool for characterizing large, imprecise reflectors  

DOE Green Energy (OSTI)

A prototype Video Scanning Hartmann Optical Tester (VSHOT) has been developed to characterize the optics of dish-type solar concentrators. VSHOT is a flexible platform that may characterize any large reflector with a focal length over diameter ratio (f{number_sign}) greater than 0. 45, and RMS optical error in the 0. I - I 0 milliradian range. The VSHOT hardware, software, and operation are described. Measurement uncertainty and preliminary test results are discussed. Another potential application being explored for the VSHOT is the quality assurance of slumped-glass automobile windshields. Preliminary test results from a reference optic and a section of a windshield are presented.

Jones, S.A.; Neal, D.R.; Gruetzner, J.K.; Houser, R.M.; Edgar, R.M. [Sandia National Labs., Albuquerque, NM (United States); Wendelin, T.J. [National Renewable Energy Lab., Golden, CO (United States)

1996-11-01T23:59:59.000Z

196

High Efficiency LED Lamp for Solid-State Lighting  

SciTech Connect

This report contains a summary of technical achievements during a three-year project to demonstrate high efficiency, solid-state lamps based on gallium nitride/silicon carbide light-emitting diodes. Novel chip designs and fabrication processes are described for a new type of nitride light-emitting diode with the potential for very high efficiency. This work resulted in the demonstration of blue light-emitting diodes in the one watt class that achieved up to 495 mW of light output at 350 mA drive current, corresponding to quantum and wall plug efficiencies of 51% and 45%, respectively. When combined with a phosphor in Cree's 7090 XLamp package, these advanced blue-emitting devices resulted in white light-emitting diodes whose efficacy exceeded 85 lumens per watt. In addition, up to 1040 lumens at greater than 85 lumens per watt was achieved by combining multiple devices to make a compact white lamp module with high optical efficiency.

James Ibbetson

2006-12-31T23:59:59.000Z

197

External reflectors for large solar collector arrays, simulation model and experimental results  

SciTech Connect

A model for the calculation of incident solar radiation from flat-and CPC-shaped external reflectors onto flat plate solar collector arrays has been developed. Assuming an infinite length of the collector/reflector rows, the basic calculations of incident radiation in the collector plane from the reflector become very simple. The direct radiation from the sun is projected into a vertical plane perpendicular to the collector and reflector plane. The incident radiation onto the collector, including corrections for shadowing and lost radiation above the collector, can then be calculated using 2-D geometry. For very short collector/reflector rows a 3-D model is given for correction for the loss of specular radiation in the east west direction. The diffuse radiation is assumed to be isotropic. The diffuse radiation in the collector plane is calculated using view factors. CPC-shaped reflectors can be treated with the same models by introducing an equivalent flat reflector. The incidence angle for the solar radiation from the reflector onto the collector is in most cases higher than the incidence angle for the radiation directly from the sun. Therefore the incidence angle characteristics of the collector glazing and absorber become more important in this application. Equations are given for the incidence angles for diffuse and beam radiation. An annual performance increase of over 30%, 100-120 kW h/m[sup 2], has been measured for aged (four operating seasons) flat reflectors in the Swedish climate. With a CPC-shaped reflector and new reflector materials, a performance increase of up to 170 kW h/m[sup 2] is not unrealistic. This means that the collector and ground area requirement can be reduced by more than 30% for a given load.

Perers, B.; Karlsson, B. (Vattenfall Utveckling, Aelvkarleby (Sweden))

1993-11-01T23:59:59.000Z

198

Ultraviolet reflector materials for solar detoxification of hazardous waste  

DOE Green Energy (OSTI)

Organic waste detoxification requires cleavage of carbon bonds. Such reactions can be photo-driven by light that is energetic enough to disrupt such bonds. Alternately, light can be used to activate catalyst materials, which in turn can break organic bonds. In either case, photons with wavelengths less than 400 nm are required. Because the terrestrial solar resource below 400 nm is so small (roughly 3% of the available spectrum), highly efficient optical concentrators are needed that can withstand outdoor service conditions. In the past, optical elements for solar application have been designed to prevent ultraviolet (uv) radiation from reaching the reflective layer to avoid the potentially harmful effects of such light on the collector materials themselves. This effectively forfeits the uv part of the spectrum in return for some measure of protection against optical degradation. To optimize the cost/performance benefit of photochemical reaction systems, optical materials must be developed that are not only highly efficient but also inherently stable against the radiation they are designed to concentrate. The requirements of uv optical elements in terms of appropriate spectral bands and level of reflectance are established based upon the needs of photochemical applications. Relevant literature on uv reflector materials is reviewed which, along with discussions with industrial contacts, allows the establishment of a data base of currently available materials. Although a number of related technologies exist that require uv reflectors, to date little attention has been paid to achieving outdoor durability required for solar applications. 49 refs., 3 figs.

Jorgensen, G.; Govindarajan, R.

1991-07-01T23:59:59.000Z

199

Energy Basics: Incandescent Lighting  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

The three most common types of incandescent lamps are: Standard incandescent lamps Energy-Saving Incandescent (or Halogen) Reflector lamps Standard Incandescent Lamps Known as...

200

Demonstration of LED Retrofit Lamps at an Exhibit of 19th Century Photography at the Getty Museum  

SciTech Connect

This document is a report of observations and results obtained from a lighting demonstration project conducted under the U.S. Department of Energy (DOE) GATEWAY Demonstration Program. The program supports demonstrations of high-performance solid-state lighting (SSL) products in order to develop empirical data and experience with in-the-field applications of this advanced lighting technology. The DOE GATEWAY Demonstration Program focuses on providing a source of independent, third-party data for use in decision-making by lighting users and professionals; this data should be considered in combination with other information relevant to the particular site and application under examination. Each GATEWAY Demonstration compares SSL products against the incumbent technologies used in that location. Depending on available information and circumstances, the SSL product may also be compared to alternate lighting technologies. Though products demonstrated in the GATEWAY program may have been prescreened for performance, DOE does not endorse any commercial product or in any way guarantee that users will achieve the same results through use of these products. This report reviews the installation and use of LED PAR38 lamps to light a collection of toned albument photographic prints at the J. Paul Getty Museum in Malibu, California. Research results provided by the Getty Conservation Institute are incorporated and discussed.

Miller, Naomi J.; Druzik, Jim

2012-03-02T23:59:59.000Z

Note: This page contains sample records for the topic "reflector par lamps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Reflector for efficient coupling of a laser beam to air or other fluids  

DOE Patents (OSTI)

A reflector array is disclosed herein that provides a controlled region or regions of plasma breakdowns from a laser beam produced at a remotely-based laser source. The plasma may be applied to produce thrust to propel a spacecraft, or to diagnose a laser beam, or to produce shock waves. The spacecraft propulsion system comprises a reflector array attached to the vehicle. The reflector array comprises a plurality of reflectors spaced apart on a reflective surface, with each reflector acting as an independent focusing mirror. The reflectors are spaced closely together to form a continuous or partially-continuous surface. The reflector array may be formed from a sheet of reflective material, such as copper or aluminum. In operation, a beam of electromagnetic energy, such as a laser beam, is directed at the reflectors which focus the reflected electromagnetic energy at a plurality of regions off the surface. The energy concentrated in the focal region causes a breakdown of the air or other fluid in the focal region, creating a plasma. Electromagnetic energy is absorbed in the plasma and it grows in volume, compressing and heating the adjacent fluid thereby providing thrust. Laser pulses may be applied repetitively. After each such thrust pulse, fresh air can be introduced next to the surface either laterally, or through a perforated surface. If air or some other gas or vapor is supplied, for example from a tank carried on board a vehicle, this invention may also be used to provide thrust in a vacuum environment. 10 figs.

Kare, J.T.

1992-10-06T23:59:59.000Z

202

Reflector for efficient coupling of a laser beam to air or other fluids  

DOE Patents (OSTI)

A reflector array is disclosed herein that provides a controlled region or regions of plasma breakdowns from a laser beam produced at a remotely-based laser source. The plasma may be applied to produce thrust to propel a spacecraft, or to diagnose a laser beam, or to produce shockwaves. The spacecraft propulsion system comprises a reflector array attached to the vehicle. The reflector array comprises a plurality of reflectors spaced apart on a reflective surface, with each reflector acting as an independent focusing mirror. The reflectors are spaced closely together to form a continuous or partially-continuous surface. The reflector array may be formed from a sheet of reflective material, such as copper or aluminum. In operation, a beam of electromagnetic energy, such as a laser beam, is directed at the reflectors which focus the reflected electromagnetic energy at a plurality of regions off the surface. The energy concentrated in the focal region causes a breakdown of the air or other fluids in the focal region, creating a plasma. Electromagnetic energy is absorbed in the plasma and it grows in volume, compressing and heating the adjacent fluid thereby providing thrust. Laser pulses may be applied repetitively. After each such thrust pulse, fresh air can be introduced next to the surface either laterally, or through a perforated surface. If air or some other gas or vapor is supplied, for example from a tank carried on board a vehicle, this invention may also be used to provide thrust in a vacuum environment. 8 figs.

Kare, J.T.

1990-12-31T23:59:59.000Z

203

Reflector for efficient coupling of a laser beam to air or other fluids  

DOE Patents (OSTI)

A reflector array is disclosed herein that provides a controlled region or regions of plasma breakdowns from a laser beam produced at a remotely-based laser source. The plasma may be applied to produce thrust to propel a spacecraft, or to diagnose a laser beam, or to produce shockwaves. The spacecraft propulsion system comprises a reflector array attached to the vehicle. The reflector array comprises a plurality of reflectors spaced apart on a reflective surface, with each reflector acting as an independent focusing mirror. The reflectors are spaced closely together to form a continuous or partially-continuous surface. The reflector array may be formed from a sheet of reflective material, such as copper or aluminum. In operation, a beam of electromagnetic energy, such as a laser beam, is directed at the reflectors which focus the reflected electromagnetic energy at a plurality of regions off the surface. The energy concentrated in the focal region causes a breakdown of the air or other fluids in the focal region, creating a plasma. Electromagnetic energy is absorbed in the plasma and it grows in volume, compressing and heating the adjacent fluid thereby providing thrust. Laser pulses may be applied repetitively. After each such thrust pulse, fresh air can be introduced next to the surface either laterally, or through a perforated surface. If air or some other gas or vapor is supplied, for example from a tank carried on board a vehicle, this invention may also be used to provide thrust in a vacuum environment. 8 figs.

Kare, J.T.

1990-01-01T23:59:59.000Z

204

Seismic evidence for a chemical heterogeneity in the midmantle: A strong and slightly dipping seismic reflector  

E-Print Network (OSTI)

-velocity anomalies (hereafter referred to as HVAs) are not observed by global tomographic models [van der Hilst et al 14). On the other hand, there are no HVAs observed around the mid- lower mantle reflectors [Kaneshima. The presence of the HVAs above the midmantle reflectors and the absence of HVAs around the mid-lower mantle

Niu, Fenglin

205

Spectral irradiance model for tungsten halogen lamps in 340-850 nm wavelength range  

Science Conference Proceedings (OSTI)

We have developed a physical model for the spectral irradiance of 1 kW tungsten halogen incandescent lamps for the wavelength range 340-850 nm. The model consists of the Planck's radiation law, published values for the emissivity of tungsten, and a residual spectral correction function taking into account unknown factors of the lamp. The correction function was determined by measuring the spectra of a 1000 W, quartz-halogen, tungsten coiled filament (FEL) lamp at different temperatures. The new model was tested with lamps of types FEL and 1000 W, 120 V quartz halogen (DXW). Comparisons with measurements of two national standards laboratories indicate that the model can account for the spectral irradiance values of lamps with an agreement better than 1% throughout the spectral region studied. We further demonstrate that the spectral irradiance of a lamp can be predicted with an expanded uncertainty of 2.6% if the color temperature and illuminance values for the lamp are known with expanded uncertainties of 20 K and 2%, respectively. In addition, it is suggested that the spectral irradiance may be derived from resistance measurements of the filament with lamp on and off.

Ojanen, Maija; Kaerhae, Petri; Ikonen, Erkki

2010-02-10T23:59:59.000Z

206

Table lamp with dynamically controlled lighting distribution and uniformly illuminated luminous shade  

DOE Patents (OSTI)

A double lamp table or floor lamp lighting system has a pair of compact fluorescent lamps (CFLs) or other lamps arranged vertically, i.e. one lamp above the other, with a reflective septum in between. By selectively turning on one or both of the CFLs, down lighting, up lighting, or both up and down lighting is produced. The control system can also vary the light intensity from each CFL. The reflective septum ensures that almost all the light produced by each lamp will be directed into the desired light distribution pattern which is selected and easily changed by the user. In a particular configuration, the reflective septum is bowl shaped, with the upper CFL sitting in the bowl, and a luminous shade hanging down from the bowl. The lower CFL provides both task lighting and uniform shade luminance. Planar compact fluorescent lamps, e.g. circular CFLs, particularly oriented horizontally, are preferable. CFLs provide energy efficiency. However, other types of lamps, including incandescent, halogen, and LEDs can also be used in the fixture. The lighting system may be designed for the home, hospitality, office or other environments.

Siminovitch, Michael J. (Pinole, CA); Page, Erik R. (Berkeley, CA)

2002-01-01T23:59:59.000Z

207

Glossary of Screen Labels for PARS II V1  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Glossary 1 Glossary 1 Glossary of Screen Labels for PARS II V1.0.0 Goal The primary goal of this glossary is to help PARS II end users understand the items of data that they are viewing or entering on their PARS II application screens. It does not provide technical information on the schema of the PARS II database. A separate PARS II Data Dictionary document is being provided for PARS II users who need such technical information. Overview This document consists of a table defining each data label displayed on PARS II screens. It is divided into sections by PARS II screen title. To find the meaning of a data item, first find the section describing the relevant screen, then find the particular screen label description. The sections are listed in order of the major functional area of the PARS II System:

208

Project Assessment and Reporting System (PARS II) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Project Assessment and Reporting System (PARS II) Project Assessment and Reporting System (PARS II) Project Assessment and Reporting System (PARS II) Welcome to PARS II PARS II is the Department's official "System of Record" for capital asset project performance information. Because PARS II uses the same data as maintained in our contractors' project management systems, everyone from the Federal Project Director's staff to the Secretary of Energy will have easy access to the same data. The PARS II software application is managed by the MA Office of Engineering and Construction Management and is used by federal and contractor personnel across the nation to record and track the progress of major construction and environmental cleanup projects. Questions or comments about PARS II should be directed to the PARS II Help

209

State-of-the-art low-cost solar reflector materials  

SciTech Connect

Solar thermal technologies generate power by concentrating sunlight with large mirrors. The National Renewable Energy Laboratory (NREL) is working with industrial partners to develop the optical reflector materials needed for the successful deployment of this technology. The reflector materials must be low in cost and maintain high specular reflectance for extended lifetimes in severe outdoor environments. Currently, the best candidate materials for solar mirrors are silver-coated low-iron glass and silvered polymer films. Polymer reflectors are lighter in weight, offer greater flexibility in system design, and have the potential for lower cost than glass mirrors. In parallel with collaborative activities, several innovative candidate reflector-material constructions were investigated at NREL. The low-cost material requirement necessitates manufacturing compatible with mass-production techniques. Future cooperative efforts with the web-coating industry offers the promise of exciting new alternative materials and the potential for dramatic cost savings in developing advanced solar reflector materials.

Kennedy, C; Jorgensen, G

1994-11-01T23:59:59.000Z

210

ParCAT: Parallel Climate Analysis Toolkit  

SciTech Connect

Climate science is employing increasingly complex models and simulations to analyze the past and predict the future of Earth s climate. This growth in complexity is creating a widening gap between the data being produced and the ability to analyze the datasets. Parallel computing tools are necessary to analyze, compare, and interpret the simulation data. The Parallel Climate Analysis Toolkit (ParCAT) provides basic tools to efficiently use parallel computing techniques to make analysis of these datasets manageable. The toolkit provides the ability to compute spatio-temporal means, differences between runs or differences between averages of runs, and histograms of the values in a data set. ParCAT is implemented as a command-line utility written in C. This allows for easy integration in other tools and allows for use in scripts. This also makes it possible to run ParCAT on many platforms from laptops to supercomputers. ParCAT outputs NetCDF files so it is compatible with existing utilities such as Panoply and UV-CDAT. This paper describes ParCAT and presents results from some example runs on the Titan system at ORNL.

Smith, Brian E [ORNL; Steed, Chad A [ORNL; Shipman, Galen M [ORNL; Ricciuto, Daniel M [ORNL; Thornton, Peter E [ORNL; Wehner, Michael [Lawrence Berkeley National Laboratory (LBNL); Williams, Dean N. [Lawrence Livermore National Laboratory (LLNL)

2013-01-01T23:59:59.000Z

211

Benefit of Lunar Regolith on Reflector Mass Savings  

Science Conference Proceedings (OSTI)

The 2004 NASA Vision for Space Exploration calls for the return of mankind to the moon by no later than 2020, in preparation for an adventure to Mars and beyond. An envisioned lunar outpost will provide living quarters for initially 5- 10 astronauts for up to 2 weeks, and latter for science experiments, and recovery of mineral and indigenous resources for the day-to-day operation and production of propellant. These activities would require electrical and thermal powers in the order of 10's - 100's of kilowatts 24/7. Potential power options include photovoltaic, requiring massive batteries or fuel cells for energy storage during the long nights on the moon, and nuclear reactor power systems, which are much more compact and operate independent of the sun. This paper examines the benefit of using the lunar regolith as a supplemental neutron reflector on decreasing the launch mass of the Sectored Compact Reactor (SCoRe-S), developed at the Institute for Space and Nuclear Power Studies. In addition to providing at least $2.00 of hot-clean excess reactivity at the beginning of life, various SCoRe-S concepts investigated in this paper are at least $1.00 sub-critical when shutdown, and when the bare reactor cores are submerged in wet sand and flooded with seawater, following a launch abort accident. Design calculations performed using MCNP5 confirmed that using lunar regolith as supplementary reflector reduces the launch mass of the SCoRe-S cores by {approx} 34% - 35%, or 150 - 200 kg, while satisfying the above reactivity requirements.

Hatton, Steven A.; El-Genk, Mohamed S. [Institute for Space and Nuclear Power Studies, University of New Mexico, Albuquerque, NM 87131-0001 (United States); Dept. of Chemical and Nuclear Engineering, University of New Mexico, Albuquerque, NM 87131-0001 (United States)

2007-01-30T23:59:59.000Z

212

Research on Active Power Factor Correction of the Electronic Ballast for High-Pressure Sodium Lamps Based on L6563  

Science Conference Proceedings (OSTI)

In the recent years, there has been a growing interest in the design of high-pressure sodium lamp electronic ballast. Two measures are proposed to improve the power factor of high-pressure sodium lamp electronic ballasts from the definition of harmonic ... Keywords: high-pressure sodium lamps, electronic ballast, active power factor correction, L6563

Sun Jing

2010-06-01T23:59:59.000Z

213

voqu sur l'imagerie et confirm par succs thrapeutique, nous avons dtect par PCR  

E-Print Network (OSTI)

évoqué sur l'imagerie et confirmé par succès thérapeutique, nous avons détecté par PCR de l'encéphalopathie toxoplasmique, nous avons noté 5 PCR positives dans le sang périphérique. La surveillance de ces sujets est en cours. La recherche d'ADN toxoplasmique par PCR sur le sang périphérique, examen non invasif, donne des

Recanati, Catherine

214

PARS II Data Quality Memorandum from Deputy Secretary Poneman...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Data Quality Memorandum from Deputy Secretary Poneman (June 19, 2012) PARS II Data Quality Memorandum from Deputy Secretary Poneman (June 19, 2012) PARS II Data Quality.pdf More...

215

PARS II New Contractor Information for Interconnection Security...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

the tables below and return this form to the PARS II Support Team at DL-CF-40PARS2Support@hq.doe.gov. Contractor Point of Contact Information Name Position CompanyOrganization...

216

ParFlow User's Manual Reed M. Maxwell1  

E-Print Network (OSTI)

.5.1 Introduction to the ParFlow TCL commands (PFTCL) . . . . . . . . . . . 14 3.5.2 PFTCL Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 3.5.3 Common examples using ParFlow TCL commands (PFTCL) . . . . . . . . 21 3.6 Directory of Test

217

Microsoft Word - PARS II Process Document - Close Period 2013...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PARS II APM DepSec Monthly Report & Close Period, V-2013-04-29 Page 1 PARS II Process Document APM DEPSEC MONTHLY REPORT & CLOSE PERIOD PURPOSE The purpose of this document is to...

218

Glossary of Screen Labels for PARS II V1 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Glossary of Screen Labels for PARS II V1 Glossary of Screen Labels for PARS II V1 Glossary of Screen Labels for PARS II V1 More Documents & Publications PARS II Standard Operating...

219

NNT : 2013 EMSE 0681 prsente par  

E-Print Network (OSTI)

applications à haute température comme le spatial, le nucléaire, les piles à combustibles SOFC, etc, [4], [5 utilisation comme électrolyte solide dans des applications telles que les piles à combustibles SOFC (Solid dans les anodes des piles à combustible (SOFC). La zircone stabilisée YSZ peut être obtenue par

220

PARS II Process Document OVERTARGET BASELINE (OTB) REPORTING IN PARS II  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Process Document Process Document OVERTARGET BASELINE (OTB) REPORTING IN PARS II PURPOSE The purpose of this document is to describe the process by which contractors should conduct OTB reporting after OTB on the project was approved and implemented in the contractor system. SCOPE This process applies to projects on which OVERTARGET BASELINE (OTB) was approved and implemented and identifies data elements, information, and processes by which contractor should report changes related to OTB in PARS II. PROCESS Upon implementation of OTB, the following data elements must be provided by the contractor into PARS II. Contractor should validate accuracy of the data in each identified field by reviewing EV_CPR_HEADER table of the PARS II Upload Template file. * OTB/OTS Date: Date when OTB/OTS was implemented in contractor system. If this data element does

Note: This page contains sample records for the topic "reflector par lamps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

PARS II On Hold Projects, V-2013-04-02 Page 1 PARS II Process...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

On Hold Projects, V-2013-04-02 Page 1 PARS II Process Document ON HOLD PROJECTS - Place On Hold, Re-Activate, and Cancel PURPOSE The purpose of this document is to describe the...

222

Identification of lamp ballasts containing PCBs. Revised edition. Report no. EPS 2/CC/2  

SciTech Connect

Fluorescent lamp ballast capacitors are among the products that may contain polychlorinated biphenyls (PCBs). Questions about lamp ballasts concern the potential for leakage, the risk of heating and exploding, how to identify a ballast which contains PCBs, and the risk to human health. This study identifies those ballasts containing PCB-filled capacitors; the domestic and foreign manufacturers of PCB-containing ballasts; the total quantity of PCBs used in ballasts; and any potential problems. The study does not identify the risks of human health arising from the use of PCB-ballasts in fluorescent lamps.

1991-01-01T23:59:59.000Z

223

SUR LES RADIOLMENTS FORMS DANS L'URANIUM IRRADI PAR LES NEUTRONS. II Par IRNE CURIE et PAUL SAVITCH.  

E-Print Network (OSTI)

SUR LES RADIO�L�MENTS FORM�S DANS L'URANIUM IRRADI� PAR LES NEUTRONS. II Par IR�NE CURIE et PAUL SAVITCH. Institut du Radium. Laboratoire Curie. Sommaire. 2014 Il se forme dans l'uranium irradié par les l'irra- diation de l'uranium par les neutrons, résultats dont nous avons vérifié une partie. Ces

Paris-Sud XI, Université de

224

Miniature UV lamp excited by subnanosecond voltage pulses  

SciTech Connect

Energy, time, and spectral characteristics of emission of the second positive system of N{sub 2} molecules in gaseous nitrogen, Ar - N{sub 2} mixture, and air are investigated. An FPG-10 generator with voltage pulse FWHM of 200 and 400 ps and matched-load amplitudes of 14 and 6 kV, respectively, is used to excite gases. It is shown that excitation can be performed in two regimes using this generator. In the first regime a diffuse discharge is formed at atmospheric pressure, which opens ways to design miniature nanosecond UV lamps. A diffuse discharge is formed due to the generation of runaway electrons, with the aid of electrodes having a small radius of curvature and voltage pulses with a sharp leading edge. In the second regime an elevated average radiation power is obtained under excitation by a barrier discharge. However, the operating pressure is lower in this case, and the sizes of the emitting region and the UV pulse width significantly increase. (laser applications and other topics in quantum electronics)

Erofeev, M V; Baksht, E Kh; Tarasenko, Viktor F; Shut'ko, Yu V [Institute of High Current Electronics, Siberian Branch, Russian Academy of Sciences, Tomsk (Russian Federation)

2010-08-27T23:59:59.000Z

225

Integrated starting and running amalgam assembly for an electrodeless fluorescent lamp  

DOE Patents (OSTI)

An integrated starting and running amalgam assembly for an electrodeless SEF fluorescent lamp includes a wire mesh amalgam support constructed to jointly optimize positions of a starting amalgam and a running amalgam in the lamp, thereby optimizing mercury vapor pressure in the lamp during both starting and steady-state operation in order to rapidly achieve and maintain high light output. The wire mesh amalgam support is constructed to support the starting amalgam toward one end thereof and the running amalgam toward the other end thereof, and the wire mesh is rolled for friction-fitting within the exhaust tube of the lamp. The positions of the starting and running amalgams on the wire mesh are jointly optimized such that high light output is achieved quickly and maintained, while avoiding any significant reduction in light output between starting and running operation.

Borowiec, Joseph Christopher (Schenectady, NY); Cocoma, John Paul (Clifton Park, NY); Roberts, Victor David (Burnt Hills, NY)

1998-01-01T23:59:59.000Z

226

On the Brightness of the Thomson Lamp: A Prolegomenon to Quantum Recursion Theory  

Science Conference Proceedings (OSTI)

Some physical aspects related to the limit operations of the Thomson lamp are discussed. Regardless of the formally unbounded and even infinite number of "steps" involved, the physical limit has an operational meaning in agreement with the Abel sums ...

Karl Svozil

2009-09-01T23:59:59.000Z

227

Few-Group Baffle and/or Reflector Constants for Diffusion Calculation Application  

Science Conference Proceedings (OSTI)

Accurate calculation of neutron leakage in LWR cores is critical to effective fuel management and safety analysis. The definitive baffle and reflector constants developed in this study allow engineers to more accurately perform such few-group diffusion analyses.

1984-08-01T23:59:59.000Z

228

Long-external-cavity distributed Bragg reflector laser with subkilohertz intrinsic linewidth  

E-Print Network (OSTI)

We report on a simple, compact, and robust 780 nm distributed Bragg reflector laser with subkilohertz intrinsic linewidth. An external cavity with optical path length of 3.6 m, implemented with an optical fiber, reduces ...

Lin, Qian

229

Custom Engineering parabolic glass reflector for the Sandia prototype solar collector  

DOE Green Energy (OSTI)

The parabolic glass reflector, designed and constructed by Custom Engineering, Incorporated, is described. A brief summary of its performance as part of the Sandia prototype trough solar collector system is given.

Otts, J.; Sallis, D.

1981-08-01T23:59:59.000Z

230

AlGaAsSb/GaSb Distributed Bragg Reflectors Grown by Organometallic Vapor Phase Epitaxy  

SciTech Connect

The first AlGaAsSb/GaSb quarter-wave distributed Bragg reflectors grown by metallic vapor phase epitaxy are reported. The peak reflectance is 96% for a 10-period structure.

C.A. Wang; C.J. Vineis; D.R. Calawa

2002-02-13T23:59:59.000Z

231

Solar reflector soiling pattern distributions and reflectance measurement requirements  

DOE Green Energy (OSTI)

Short-term specular reflectance losses from optical surfaces used in the collection or concentration of solar energy results in significant reduction of these systems' output. Losses range from 0.1% to 1.0% per day, approaching asymptotes of 25% to 60% for periods greater than one year, depending onsite and season. To appropriately assess the value of a particular location for the production of power, consideration of the rates of soiling and strategies to minimize losses resulting from soiling must be considered. Strategies for measuring the optical performance of reflector materials to a specified degree of accuracy have been developed, according to the types of soiling patterns observed. It was found most soiling occurs with the accumulation of particulates in spots of different sizes, and the spot sizes follow a lognormal distribution. For most practical situations, it was determined that 10 measurements with a 1-cm-diameter beam are enough to place the average value within 3% of the true value, with a confidence level of 95%.

Kidney, K. (Colorado Univ., Denver, CO (USA))

1990-10-01T23:59:59.000Z

232

PARS II Standard Operating Procedure Business Rules  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

June 25, 2011 June 25, 2011 U.S. Department of Energy The PARS II Standard Operating Procedure is a "living document" and will be updated on an ongoing basis. Comments or suggestions are welcome and should be forwarded to the PARS II administrator at PARSIIsupportoecm@hq.doe.gov. Notes Comment Pages Comment Pages Index Screenshot Pages Introduction I-1 Generic Business Rules I-2 Select Project I-3 - I-5 Enter/Modify Project Information I-6 - I-15 Enter/Modify Contact Information I-16 - I-21 Creating a Project I-22 Enter CD0 Information I-23 - I-26 Enter CD1 Information I-27 - I-29 Enter CD2 Information I-30 - I-33 Enter CD3A Information I-34 - I-36 Enter CD3 Information I-37 - I-39 Enter CD4 Information I-40 - I-42 Enter Closeout Information I-43 - I-45 Enter BCP Information I-46 - I-50 Screenshot

233

PARS II KNOWN ISSUES AND SUGGESTED WORKAROUNDS  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

KNOWN ISSUES AND SUGGESTED KNOWN ISSUES AND SUGGESTED WORKAROUNDS October 1, 2010 1 The following information identifies known issues in PARS II and suggests possible workarounds to address those issues. Upon log-in, I receive a white screen. What should I do? A fix was added to PARS II to partially mitigate the issue of users getting a blank white screen when logging in. This issue is caused by their previous session having timed out, and Internet Explorer not recognizing that the session can't be restored. Note: While the fix assists in reducing the number of instances of this happening, it does not completely eliminate the issue as there are factors outside of the application that affect it. In the event the user receives a white screen, the following workaround is

234

EXC-12-0007 - In the Matter of Tailored Lighting, Inc. | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EXC-12-0007 - In the Matter of Tailored Lighting, Inc. EXC-12-0007 - In the Matter of Tailored Lighting, Inc. EXC-12-0007 - In the Matter of Tailored Lighting, Inc. On October 23, 2012, OHA issued a decision considering an Application for Exception filed by Tailored Lighting, Inc. (TLI) for relief from the provisions of 10 C.F.R. Part 430, Energy Conservation Program: Energy Conservation Standards and Test Procedures for General Service Fluorescent Lamps and Incandescent Reflector Lamps (Lighting Efficiency Standards). In its exception request, TLI requests exception relief for its principal product, a PAR-shaped daylight incandescent reflector lamp known as the SoLux PAR. The company maintains that it has been unable to develop a more efficient alternative that offers the same utility as the SoLux PAR and, as

235

EXC-12-0007 - In the Matter of Tailored Lighting, Inc. | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

07 - In the Matter of Tailored Lighting, Inc. 07 - In the Matter of Tailored Lighting, Inc. EXC-12-0007 - In the Matter of Tailored Lighting, Inc. On October 23, 2012, OHA issued a decision considering an Application for Exception filed by Tailored Lighting, Inc. (TLI) for relief from the provisions of 10 C.F.R. Part 430, Energy Conservation Program: Energy Conservation Standards and Test Procedures for General Service Fluorescent Lamps and Incandescent Reflector Lamps (Lighting Efficiency Standards). In its exception request, TLI requests exception relief for its principal product, a PAR-shaped daylight incandescent reflector lamp known as the SoLux PAR. The company maintains that it has been unable to develop a more efficient alternative that offers the same utility as the SoLux PAR and, as a result, will suffer serious hardship, gross inequity, and an unfair

236

Contractor-Specific Documentation & Information in PARS II  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Contractor-Specific Documentation & Information in PARS II Contractor-Specific Documentation & Information in PARS II DOE Office of Acquisition and Project Management established guidelines for documentation that should be available within PARS II through contractor-specific records that are not linked to any specific project within PARS II. This guidance is applicable only to those contractors who are currently executing Active Post CD-2 Capital Asset Construction Project(s) that are reported in PARS II. Table below outlines specific documents that should be attached to the contractor record in PARS II as well as the party responsible for ensuring contractor record contains each specific document. DOCUMENT NAME DOCUMENT DESCRIPTION UPLOAD RESPONSIBILITY EVMS Systems Description Current contractor EVMS Systems Description document with all

237

X-ray Methods in High-Intensity Discharges and Metal-Halide Lamps: X-ray Induced Fluorescence  

SciTech Connect

We describe the use of x-ray induced fluorescence to study metal-halide high-intensity discharge lamps and to measure equilibrium vapor pressures of metal-halide salts. The physical principles of metal-halide lamps, relevant aspects of x-ray-atom interactions, the experimental method using synchrotron radiation, and x-ray induced fluorescence measurements relevant to metal-halide lamps are covered.

Curry, John J.; Lapatovich, Walter P.; Henins, Albert (NIST)

2011-12-09T23:59:59.000Z

238

Midtemperature solar systems test facility predictions for thermal performance of the Acurex solar collector with FEK 244 reflector surface  

DOE Green Energy (OSTI)

Thermal performance predictions are presented for the Acurex solar collector, with FEK 244 reflector surface, for three output temperatures at five cities in the United States.

Harrison, T.D.

1981-01-01T23:59:59.000Z

239

Determination of the cathode and anode voltage drops in high power low-pressure amalgam lamps  

Science Conference Proceedings (OSTI)

For the first time, cathode and anode drops of powerful low-pressure amalgam lamps were measured. The lamp discharge current is 3.2 A, discharge current frequency is 43 kHz, linear electric power is 2.4 W/cm. The method of determination of a cathode drop is based on the change of a lamp operating voltage at variation of the electrode filament current at constant discharge current. The total (cathode plus anode) drop of voltage was measured by other, independent ways. The maximum cathode fall is 10.8 V; the anode fall corresponding to the maximal cathode fall is 2.4 V. It is shown that in powerful low pressure amalgam lamps the anode fall makes a considerable contribution (in certain cases, the basic one) to heating of electrodes. Therefore, the anode fall cannot be neglected, at design an electrode and ballast of amalgam lamps with operating discharge current frequency of tens of kHz.

Vasilyak, L. M., E-mail: vasilyak@ihed.ras.ru [Russian Academy of Sciences, Joint Institute for High Temperatures (Russian Federation); Vasiliev, A. I., E-mail: vasiliev@npo.lit.ru; Kostyuchenko, S. V.; Sokolov, D. V.; Startsev, A. Yu. [Joint Stock Company NPO LIT (Russian Federation); Kudryavtsev, N. N. [Moscow Institute of Physics and Technology (State University) (Russian Federation)

2011-12-15T23:59:59.000Z

240

Energy-Efficient, High-Color-Rendering LED Lamps Using Oxyfluoride and Fluoride Phosphors  

Science Conference Proceedings (OSTI)

LED lamps using phosphor downconversion can be designed to replace incandescent or halogen sources with a 'warm-white' correlated color temperature (CCT) of 2700-3200 K and a color rendering index (CRI) greater than 90. However, these lamps have efficacies of {approx}70% of standard 'cool-white' LED packages (CCT = 4500-6000 K; CRI = 75-80). In this report, we describe structural and luminescence properties of fluoride and oxyfluoride phosphors, specifically a (Sr,Ca){sub 3}(Al,Si)O{sub 4}(F,O):Ce{sup 3+} yellow-green phosphor and a K{sub 2}TiF{sub 6}:Mn{sup 4+} red phosphor, that can reduce this gap and therefore meet the spectral and efficiency requirements for high-efficacy LED lighting. LED lamps with a warm-white color temperature (3088 K), high CRI (90), and an efficacy of {approx}82 lm/W are demonstrated using these phosphors. This efficacy is {approx}85% of comparable cool-white lamps using typical Y{sub 3}Al{sub 5}O{sub 12}:Ce{sup 3+}-based phosphors, significantly reducing the efficacy gap between warm-white and cool-white LED lamps that use phosphor downconversion.

Setlur, A.; Radkov, E; Henderson, C; Her, J; Srivastava, A; Karkada, N; Kishore, M; Kumar, N; Aesram, D; et al.

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "reflector par lamps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Heavy reflector experiments in the IPEN/MB-01 reactor: Stainless steel, carbon steel and nickel  

SciTech Connect

New experiments devoted to the measurements of physical parameters of a light water core surrounded by a heavy reflector were performed in the IPEN/MB-01 research reactor facility. These experiments comprise three sets of heavy reflector (SS-304, Carbon Steel, and Nickel) in a form of laminates around 3 mm thick. Each set was introduced individually in the west face of the core of the IPEN/MB-01 reactor. The aim here is to provide high quality experimental data for the interpretation and validation of the SS-304 heavy reflector calculation methods. The experiments of Carbon Steel, which is composed mainly of iron, and Nickel were performed to provide a consistent and an interpretative check for the SS-304 reflector experiment. The experimental results comprise critical control bank positions, temperatures and reactivities as a function of the number of the plates. Particularly to the case of Nickel, the experimental data are unique of its kind. The theoretical analysis was performed by MCNP-5 with the nuclear data library ENDF/B-VII.0. It was shown that this nuclear data library has a very good performance up to thirteen plates and overestimates the reactivity for higher number of plates independently of the type of the reflector.

Santos, Adimir dos; Andrade e Silva, Graciete Simoes de; Jerez, Rogerio; Liambos Mura, Luis Felipe; Fuga, Rinaldo [Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP Av. Prof. Lineu Prestes 2242 - CEP 05508-000 Sao Paulo, SP (Brazil)

2013-05-06T23:59:59.000Z

242

PARS II Process Document SUBMITTING AND PROCESSING EMAIL AS OFFICIAL...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PARS II Process Document SUBMITTING AND PROCESSING EMAIL AS OFFICIAL PROJECT ACTION APPROVAL DOCUMENTATION PURPOSE The purpose of this document is to describe the process and...

243

PARS II Process Document - Over Target Baseline (OTB) Reporting...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Over Target Baseline (OTB) Reporting PARS II Process Document - Over Target Baseline (OTB) Reporting This document details the process by which contractors should conduct Over...

244

Contractor-Specific Documentation & Information in PARS II  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Contractor-Specific Documentation & Information in PARS II DOE Office of Acquisition and Project Management established guidelines for documentation that should be available within...

245

PARS II Standard Operating Procedure (SOP) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Standard Operating Procedure (SOP) PARS II Standard Operating Procedure (SOP) PARSIISOPVersion1.120110811.pdf More Documents & Publications External Independent Review (EIR)...

246

PARS II Process Document OVERTARGET BASELINE (OTB) REPORTING...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Contractor should validate accuracy of the data in each identified field by reviewing EVCPRHEADER table of the PARS II Upload Template file. * OTBOTS Date: Date when OTBOTS...

247

Magical Mystery Devices or Not: How do LED Lamps and Luminaires Really Measure-Up?  

SciTech Connect

Solid-state lighting products for general lighting applications are now gaining a market presence, and more and more people are asking, “Which of these are ‘good’ products? Do they perform as claimed? How do they compare? Light Emitting Diodes (LEDs) differ from other light sources enough to require new procedures for measuring their performance and comparing to other lighting options, so both manufacturers and buyers are facing a learning curve. The energy-efficiency community has traditionally compared light sources based on system efficacy: rated lamp lumens divided by power into the system. This doesn’t work for LEDs because there are no standard LED “lamp” packages and no lamp ratings, and because LED performance depends heavily on thermal, electrical, and optical design of complete lighting unit or ‘luminaire’. Luminaire efficacy is the preferred metric for LEDs because it measures the net light output from the luminaire divided by power into the system.

Paget, Maria L.; McCullough, Jeffrey J.; Steward, Heidi E.

2008-08-15T23:59:59.000Z

248

Selecting effective fluorescent lamp and ballast for retrofit in the continental United States. Final report  

SciTech Connect

Electrical lighting is a major contributor to daytime peak energy demand, accounting for about 30 percent of total electricity consumption in most Army facilities. Some of this energy may be wasted because many existing lighting systems at Army Installations use outmoded technologies. While recent technology has improved the energy efficiency of all lighting systems, fluorescent lighting-the most widely used interior building lighting-has shown the greatest efficiency gains. Retrofits using high-efficiency fluorescent lamps and ballasts can yield significant operating cost savings. High-efficiency fluorescent lighting systems are widely available, but current information on their performance characteristics is highly technical and not easily accessible to Army facility managers considering retrofit options. This report provides a single, accessible source that summarizes fluorescent lamp and ballast performance characteristics and outlines selection procedures. Fluorescent lamp, Retrofit, Ballast, Lighting. Energy conservation.

Taylor, W.R.

1993-08-01T23:59:59.000Z

249

Spectral distribution of dimmed HID lamps in a plant growth facility  

SciTech Connect

A commercial dimming ballast system for high intensity discharge (HID) lamps has been tested for use in plant growth chambers. The dimming ballast system can be controlled either manually at the dimming panel or by a d.c. voltage from a programmer or computer. Using the dimming system, photosynthetically active radiation can be continuously varied from about 200 to about 2000 ..mu..E m/sup -2/s/sup -1/. This paper shows the effects of dimming on the spectral intensity (400 to 750 nm) of three types of HID lamps measured individually and in combination to achieve a better spectral mix. The lamps used in this study were 400 w metal halide, mercury vapor and high pressure sodium.

Bingham, G.E.; Coyne, P.I.

1979-05-01T23:59:59.000Z

250

Nature of the effect of the ballast volumes of flash lamps on their emission  

SciTech Connect

The cause of the decrease in laser efficiency during pumping by flash lamps with increased ballast volumes is the unproductive loss of radiation, originating from the ballast volumes, and the associated change in the radiation brightness distribution along the length of the lamp. The increase radiation brightness at the electrodes of the light source is not the result of constriction of the discharge or the luminescence of the electrode plasma erosion, but is due to the slowing down of the plasma flows by the surface of the electrodes and to the slowing down of the ionized gas moving from the ballast volumes when it meets the denser plasma of the discharge zone. The profile of the current lines at the electrodes is established and the frequency of the axial oscillations of the plasma in the lamp is determined.

Basov, Yu.G.; Makarov, V.N.; Narkhova, G.I.

1975-11-01T23:59:59.000Z

251

Long-range, full-duplex, modulated-reflector cell phone for voice/data transmission  

DOE Patents (OSTI)

A long-range communications apparatus utilizing modulated-reflector technology is described. The apparatus includes an energy-transmitting base station and remote units that do not emit radiation in order to communicate with the base station since modulated-reflector technology is used whereby information is attached to an RF carrier wave originating from the base station which is reflected by the remote unit back to the base station. Since the remote unit does not emit radiation, only a low-power power source is required for its operation. Information from the base station is transmitted to the remote unit using a transmitter and receiver, respectively. The range of such a communications system is determined by the properties of a modulated-reflector half-duplex link.

Neagley, Daniel L. (Albuquerque, NM); Briles, Scott D. (Los Alamos, NM); Coates, Don M. (Santa Fe, NM); Freund, Samuel M. (Los Alamos, NM)

2002-01-01T23:59:59.000Z

252

Advanced Reflector and Absorber Materials (Fact Sheet), Thermal Systems Group: CSP Capabilities (TSG)  

NLE Websites -- All DOE Office Websites (Extended Search)

Ideally, we want reflector Ideally, we want reflector materials in a CSP plant to last 20 to 30 years and cost less than $2.50 per square foot (or $25 per square meter) to manufacture. Highly specular mirrors should have better than 95% reflectance into a 4-milliradian full-cone angle and should resist soiling in all outdoor conditions. NREL focuses on achieving these goals by creating and applying testing procedures that accurately predict the performance and lifetime of materials. Some testing is relatively brief, lasting several weeks, whereas other processes may take several months or even years. We evaluate the potential of reflector (mirror) and absorber (receiver) materials in the three areas described below, working with our industry partners to develop technologies that will

253

Commercial Cooling Par Engineering: Order (2013-CE-5312)  

Energy.gov (U.S. Department of Energy (DOE))

DOE ordered Commercial Cooling Par Engineering, Inc. to pay a $8,000 civil penalty after finding Commercial Cooling Par Engineering had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

254

PARS II New Contractor Information for Interconnection Security Agreement  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Contractor Information for Interconnection Security Agreement New Contractor Information for Interconnection Security Agreement V1.0 (November 18, 2010) The Department of Energy (DOE) Headquarters Program Cyber Security Plan (PCSP), dated February 2008, requires the Project Assessment and Reporting System (PARS) II System Owner and the contractor sign an Interconnection Security Agreement (ISA). The requirement for an Interconnection Security Agreement can be found on page 182 of the PCSP. The ISA template is available for review on the PARS II portal (http://management.energy.gov/online_resources/pars2.htm) under Contractor Documents. Before the contractor begins sending data to PARS II, DOE will send the ISA to the contractor for review and signature. In order to prepare the ISA for review and signature, the PARS II Support Team needs

255

Potential Environmental Impacts from the Metals in Incandescent, Compact Fluorescent Lamp (CFL), and Light-Emitting Diode (LED)  

E-Print Network (OSTI)

), and Light-Emitting Diode (LED) Bulbs Seong-Rin Lim, Daniel Kang, Oladele A. Ogunseitan,,§ and Julie M sources with compact fluorescent lamp (CFL) and light-emitting diode (LED) bulbs that use about 70% and 85 lighting systems are transitioning from incandes- cent to compact fluorescent lamp (CFL) and light

Short, Daniel

256

A light diet for a giant appetite: An assessment of China's proposed fluorescent lamp standard  

SciTech Connect

Lighting has been one of the fastest growing electric end-uses in China over the last twenty years, with an average annual growth rate of 14%. Fluorescent lighting provides a significant portion of China's lighting need. In 1998, China produced 680 million fluorescent lamps, of which 420 million were linear fluorescent lamps of various diameters (T8 to T12). There are substantial variations both in energy efficiency and lighting performance among locally produced fluorescent lamps. Such variations present a perfect opportunity for policy intervention through efficiency standards to promote the adoption of more efficient fluorescent lamps in China. This paper analyzes China's proposed minimum efficiency standard for fluorescent lamps and presents an assessment of its likely impacts on China's lighting energy consumption and GHG emissions.

Lin, Jiang

2002-04-11T23:59:59.000Z

257

High frequency transformerless electronics ballast using double inductor-capacitor resonant power conversion for gas discharge lamps  

SciTech Connect

A novel high frequency LCLC double resonant electronic ballast has been developed for gas discharge lamp applications. The ballast consists of a half-bridge inverter which switches at zero voltage crossing and an LCLC resonant circuit which converts a low ac voltage to a high ac voltage. The LCLC resonant circuit has two LC stages. The first LC stage produces a high voltage before the lamp is ignited. The second LC stage limits lamp current with the circuit inductance after the lamp is ignited. In another embodiment a filament power supply is provided for soft start up and for dimming the lamp. The filament power supply is a secondary of the second resonant inductor. 27 figs.

Lai, J.S.

1995-06-20T23:59:59.000Z

258

PARS II On Hold Projects, V-2013-04-02 Page 1 PARS II Process Document  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

On Hold Projects, V-2013-04-02 Page 1 On Hold Projects, V-2013-04-02 Page 1 PARS II Process Document ON HOLD PROJECTS - Place On Hold, Re-Activate, and Cancel PURPOSE The purpose of this document is to describe the process of placing active pre CD-2 capital asset projects on hold, removing projects from hold through re-activation or cancellation, and reporting of these projects in PARS II. SCOPE This process applies to active pre CD-2 capital asset projects and On Hold Pre CD-2 Capital Asset Projects only that were identified by the project team and approved by Acquisition Executive (AE), or Secretarial Acquisition Executive (SAE) for Major Systems Projects, as on hold. PROCESS The goal of the process is to ensure adherence to rules identified by Change Review Board (CRB) for placing

259

15 KJ FLASH LAMP, POWER CONDITIONING UNIT DESIGNED FOR SAFTY, RELIABILITY & MANUFACTURABILITY*  

SciTech Connect

A 15kJoule, Flash Lamp Power Conditioning Unit has been successfully designed, developed, and deployed in the National Ignition Facility (NIF) Preamplifier Modules (PAM). The primary design philosophy of this power conditioning unit (PCU) is safety, reliability, and manufacturability. Cost reduction over commercially equivalent systems was also achieved through an easily manufactured packaging design optimized to meet NIF requirements. While still maintaining low cost, the PCU design includes a robust control system, fault diagnostic system, and safety features. The pulsed power design includes 6 PFN modules, each including a dual series injection trigger transformer, that drive a total of 12 flash lamp loads. The lamps are individually triggered via a 20kV pulse produced by a 1kV, MCT switched capacitive discharge unit on the primary side of the trigger transformer. The remote control interface includes an embedded controller that captures flash lamp current wave forms and fault status for each shot. The embedded controller provides the flexibility of remotely adjusting both the main drive voltage from 1.6 to 2.5 kV and the trigger voltage from 0 to 20 kV.

James, G; Merritt, B; Dreifuerst, G; Strickland, S

2007-08-07T23:59:59.000Z

260

Method and apparatus for powering an electrodeless lamp with reduced radio frequency interference  

DOE Patents (OSTI)

An electrodeless lamp waveguide structure includes tuned absorbers for spurious RF signals. A lamp waveguide with an integral frequency selective attenuation includes resonant absorbers positioned within the waveguide to absorb spurious out-of-band RF energy. The absorbers have a negligible effect on energy at the selected frequency used to excite plasma in the lamp. In a first embodiment, one or more thin slabs of lossy magnetic material are affixed to the sidewalls of the waveguide at approximately one quarter wavelength of the spurious signal from an end wall of the waveguide. The positioning of the lossy material optimizes absorption of power from the spurious signal. In a second embodiment, one or more thin slabs of lossy magnetic material are used in conjunction with band rejection waveguide filter elements. In a third embodiment, one or more microstrip filter elements are tuned to the frequency of the spurious signal and positioned within the waveguide to couple and absorb the spurious signal's energy. All three embodiments absorb negligible energy at the selected frequency and so do not significantly diminish the energy efficiency of the lamp.

Simpson, James E. (Gaithersburg, MD)

1999-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "reflector par lamps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

RF driven sulfur lamp having driving electrodes which face each other  

DOE Patents (OSTI)

A high intensity discharge lamp without mercury is disclosed radiating a selected spectrum of which can be almost entirely in the visible range from an envelope that contains a sulfur containing substance. The lamp utilizes a signal source that generates an excitation signal that is externally coupled to the exterior surface of the envelope to excite the enclosed sulfur containing substance. Various embodiments of the lamp use electrodes adjacent the envelope to couple the excitation signal thereto with the face of the electrodes shaped to complement the shape of the exterior surface of the envelope. Two shapes discussed are spherical and cylindrical. To minimize filamentary discharges each envelope may include an elongated stem affixed to the exterior thereof whereby a rotational subsystem spins the envelope. In yet another embodiment the envelope has a Dewar configuration with two electrodes, one positioned near the external curved side surface of the body, and a second to the inner surface of the hole through the envelope. Further, the envelope may contain a backfill of a selected inert gas to assist in the excitation of lamp with that backfill at a pressure of less than 1 atmosphere, wherein the backfill pressure is directly related to the increase or decrease of peak output and inversely related to the increase and decrease of the emitted spectrum from the envelope. The emitting fill can be less than 6 mg/cc, or at least 2 mg/cc of the envelope of a sulfur containing substance. 17 figs.

Gabor, G.; Orr, T.R.; Greene, C.M.; Crawford, D.G.; Berman, S.M.

1999-06-22T23:59:59.000Z

262

Method and apparatus for powering an electrodeless lamp with reduced radio frequency interference  

DOE Patents (OSTI)

An electrodeless lamp waveguide structure includes tuned absorbers for spurious RF signals. A lamp waveguide with an integral frequency selective attenuation includes resonant absorbers positioned within the waveguide to absorb spurious out-of-band RF energy. The absorbers have a negligible effect on energy at the selected frequency used to excite plasma in the lamp. In a first embodiment, one or more thin slabs of lossy magnetic material are affixed to the sidewalls of the waveguide at approximately one quarter wavelength of the spurious signal from an end wall of the waveguide. The positioning of the lossy material optimizes absorption of power from the spurious signal. In a second embodiment, one or more thin slabs of lossy magnetic material are used in conjunction with band rejection waveguide filter elements. In a third embodiment, one or more microstrip filter elements are tuned to the frequency of the spurious signal and positioned within the waveguide to couple and absorb the spurious signal's energy. All three embodiments absorb negligible energy at the selected frequency and so do not significantly diminish the energy efficiency of the lamp. 18 figs.

Simpson, J.E.

1999-06-08T23:59:59.000Z

263

Issues, Models and Solutions for Triac Modulated Phase Dimming of LED Lamps  

E-Print Network (OSTI)

/a 30 lumens 0.1 Incandescent Bulb 15 W 225 lumens 15 Fluorescent Tube Lamp 10 W 500 lumens 50 White LED bulbs, and fluorescent lights, produce light that is radiated in all directions, LEDs produce a focused especially on the potential of white LED lights, which are an important and newly emerging lighting

Lehman, Brad

264

A Local AFOS MOS Program (LAMP) and its Application to Wind Prediction  

Science Conference Proceedings (OSTI)

The Techniques Development Laboratory has a project called the local AFOS MOS Program (LAMP). Its purpose is the development of a system which can produce at any hour of the day in a Weather Service Forecast Office (WSFO) environment Model Output ...

Harry R. Glahn; David A. Unger

1986-07-01T23:59:59.000Z

265

The Fuzzy Design of the Intelligent System for the Energy-Saving Lamps  

Science Conference Proceedings (OSTI)

In the paper, a intelligent system was proposed. It consists of variable converter and intelligent controller. Variable reactor which concludes variable reactance converter and power converter has wide applications in the soft starting, speed controlling ... Keywords: fuzzy control, variable reactor, intelligent control, power converter, Energy-Saving Lamps

Youxin Yuan; Kaihua Cui; Yiping Xiao; Tieliang Xu

2008-12-01T23:59:59.000Z

266

Energy Performance and Emissions of Electronic Ballasts Powering 4-Foot Fluorescent Lamps  

Science Conference Proceedings (OSTI)

This power quality (PQ) case study presents tests performed at the Worcester Polytechnic Institute, in contract with the EPRI Power Electronics Applications Center (PEAC) to determine the average efficacy (lumens per watt), displacement power factor, total power factor, and current harmonic distortion of modern electronic ballasts powering fluorescent lamps.

2003-12-31T23:59:59.000Z

267

High frequency electronic ballast for HID lamps. Technical progress report, October 1, 1993--December 31, 1994  

SciTech Connect

Electronic Ballast Systems Corp. has been working on the development of highly efficient (94%) electronic ballast for HID lamps (35W,...,400W) providing energy savings of up to thirty five percent (35%) as compared to the only available alternative, the standard core and coil HID ballasts currently on the market.

1995-03-01T23:59:59.000Z

268

Electronic screw-in ballast and improved circline lamp phase I. Final report  

SciTech Connect

A solid state ballast has been designed for the efficient operation of a 10 in circline fluorescent lamp. The circuit can be manufactured using power hybrid technology. Eight discrete component versions of the ballasts have been delivered to LBL for testing. The results show the solid state fluorescent ballast system is more efficient than the core-coil ballasted systems on the market.

Kohler, T.P.

1980-09-01T23:59:59.000Z

269

PARS 3.0 Data Model Dictionary  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Table/Field Names and Definitions Table/Field Names and Definitions PARS 3.0 Page 1 13-Jan-03 Database Table Table Description 1. Project ID Project identification table containing information about the project. This is usually the first table of information configured with project data when creating a new project. Field Field Definition External Source 1. DOE Project ID DOE project identification code as reported in the project data sheet (e.g., 97-D-102). Project Data Sheet 2. DOE Project Name Project Name (e.g., National Ignition Facility). Project Data Sheet 3. Managing Office Code Alphanumberic code for DOE Office providing oversight and direction (e.g. EM, NNSA, SC, etc.). Select from a picklist Project Data Sheet 4. Site Code Alphanumeric abbreviation for Project Site (e.g., LLNL

270

A Comparative Verification of Localized Aviation Model Output Statistics Program (LAMP) and Numerical Weather Prediction (NWP) Model Forecasts of Ceiling Height and Visibility  

Science Conference Proceedings (OSTI)

In an effort to support aviation forecasting, the National Weather Service’s Meteorological Development Laboratory (MDL) has recently redeveloped the Localized Aviation Model Output Statistics (MOS) Program (LAMP) system. LAMP is designed to run ...

David E. Rudack; Judy E. Ghirardelli

2010-08-01T23:59:59.000Z

271

A SOLAR STILL AUGMENTED WITH A FLAT-PLATE COLLECTOR AND A REFLECTOR  

E-Print Network (OSTI)

A SOLAR STILL AUGMENTED WITH A FLAT-PLATE COLLECTOR AND A REFLECTOR A. Saleh A. Badran Mechanical ­ Jordan Amman ­ Jordan e-mail: asaleh@philadelphia.edu.jo e-mail: badran@ju.edu.jo ABSTRACT A solar distillation system was built and tested to study the effect of increasing the solar radiation incident

272

Evaluation of Hardware and Procedures for Astronaut Assembly and Repair of Large Precision Reflectors  

Science Conference Proceedings (OSTI)

A detailed procedure is presented that enables astronauts in extravehicular activity (EVA) to efficiently assemble and repair large (i.e., greater than 10m-diameter) segmented reflectors, supported by a truss, for space-based optical or radio-frequency ...

Lake Mark S.; Jr Walter L. Heard; Watson Judith J.; Collins Timothy J.

2000-08-01T23:59:59.000Z

273

Comparison of fixed asymmetrical and symmetrical reflectors for evacuated tube solar receivers  

SciTech Connect

A computer simulation of the relative performance of certain truncated symmetrical and asymmetrical fixed reflector designs for solar energy collection was performed. The comparison was on the basis of annual energy delivered to a circular cylindrical evacuated tube receiver per unit of mirror area, but seasonal load information was also included to determine possible seasonal load matching advantages of one type of collector over another when storage is employed. Circumsolar radiation models based on recent correlations in the literature was included. Major conclusions were that: (1) Annual solar fractions of between 80% and 95% seem to be feasible with a load matching collector used with moderate energy storage, with 80-90% being a likely optimum; (2) CPC reflectors always gave the best annual output performance per unit of mirror area, and the lowest receiver area for situations of constant annual load, regardless of whether the storage is included in the system; (3) Asymmetrical concentrator are more cost-effective for strongly seasonally asymmetrical load patterns; (4) Fixed parabolic systems required much more receiver area than the symmetrical CPC and asymmetrical system investigated; (5) Concentration levels utilizable in fixed systems are higher than previously supposed, with 3.5:1 in an asymmetrical reflector being optimal or nearly optimal for the domestic load pattern used in the study; (6) Using a load matched reflector, the amount of storage required to achieve solar fractions of total thermal energy (space heating, water heating, clothes drying) above 90% in a residence appears to be much lower than previously thought.

Mills, D.R.; Monger, A. (Univ. of Sydney (Australia)); Morrison, G.L. (Univ. of New South Wales, Sydney (Australia))

1994-07-01T23:59:59.000Z

274

A Generalized Adjoint Approach for Quantifying Reflector Assembly Discontinuity Factor Uncertainties  

SciTech Connect

Sensitivity-based uncertainty analysis of assembly discontinuity factors (ADFs) can be readily performed using adjoint methods for infinite lattice models. However, there is currently no adjoint-based methodology to obtain uncertainties for ADFs along an interface between a fuel and reflector region. To accommodate leakage effects in a reflector region, a 1D approximation is usually made in order to obtain the homogeneous interface flux required to calculate the ADF. Within this 1D framework an adjoint-based method is proposed that is capable of efficiently calculating ADF uncertainties. In the proposed method the sandwich rule is utilized to relate the covariance of the input parameters of 1D diffusion theory in the reflector region to the covariance of the interface ADFs. The input parameters covariance matrix can be readily obtained using sampling-based codes such as XSUSA or adjoint-based codes such as TSUNAMI. The sensitivity matrix is constructed using a fixed-source adjoint approach for inputs characterizing the reflector region. An analytic approach is then used to determine the sensitivity of the ADFs to fuel parameters using the neutron balance equation. A stochastic approach is used to validate the proposed adjoint-based method.

Yankov, Artem [University of Michigan; Collins, Benjamin [University of Michigan; Jessee, Matthew Anderson [ORNL; Downar, Thomas [University of Michigan

2012-01-01T23:59:59.000Z

275

Reflector modelling of small high leakage cores making use of multi-group nodal equivalence theory  

SciTech Connect

This research focuses on modelling reflectors in typical material testing reactors (MTRs). Equivalence theory is used to homogenise and collapse detailed transport solutions to generate equivalent nodal parameters and albedo boundary conditions for reflectors, for subsequent use in full core nodal diffusion codes. This approach to reflector modelling has been shown to be accurate for two-group large commercial light water reactor (LWR) analysis, but has not been investigated for MTRs. MTRs are smaller, with much larger leakage, environment sensitivity and multi-group spectrum dependencies than LWRs. This study aims to determine if this approach to reflector modelling is an accurate and plausible homogenisation technique for the modelling of small MTR cores. The successful implementation will result in simplified core models, better accuracy and improved efficiency of computer simulations. Codes used in this study include SCALE 6.1, OSCAR-4 and EQUIVA (the last two codes are developed and used at Necsa). The results show a five times reduction in calculational time for the proposed reduced reactor model compared to the traditional explicit model. The calculated equivalent parameters however show some sensitivity to the environment used to generate them. Differences in the results compared to the current explicit model, require more careful investigation including comparisons with a reference result, before its implementation can be recommended. (authors)

Theron, S. A. [South African Nuclear Energy Corporation (Necsa), PO Box 582, Pretoria, 0001 (South Africa); Reitsma, F. [Calvera Consultants, PO Box 150, Strubensvallei, 1735 (South Africa)

2012-07-01T23:59:59.000Z

276

Stress Testing of the Philips 60W Replacement Lamp L Prize Entry  

SciTech Connect

The Pacific Northwest National Laboratory, operated by Battelle for the U.S. Department of Energy, worked with Intertek to develop a procedure for stress testing medium screw-base light sources. This procedure, composed of alternating stress cycles and performance evaluation, was used to qualitatively compare and contrast the durability and reliability of the Philips 60W replacement lamp L Prize entry with market-proven compact fluorescent lamps (CFLs) with comparable light output and functionality. The stress cycles applied simultaneous combinations of electrical, thermal, vibration, and humidity stresses of increasing magnitude. Performance evaluations measured relative illuminance, x chromaticity and y chromaticity shifts after each stress cycle. The Philips L Prize entry lamps appear to be appreciably more durable than the incumbent energy-efficient technology, as represented by the evaluated CFLs, and with respect to the applied stresses. Through the course of testing, all 15 CFL samples permanently ceased to function as a result of the applied stresses, while only 1 Philips L Prize entry lamp exhibited a failure, the nature of which was minor, non-destructive, and a consequence of a known (and resolved) subcontractor issue. Given that current CFL technology appears to be moderately mature and no Philips L Prize entry failures could be produced within the stress envelope causing 100 percent failure of the benchmark CFLs, it seems that, in this particular implementation, light-emitting diode (LED) technology would be much more durable in the field than current CFL technology. However, the Philips L Prize entry lamps used for testing were carefully designed and built for the competition, while the benchmark CFLs were mass produced for retail sale—a distinction that should be taken into consideration. Further reliability testing on final production samples would be necessary to judge the extent to which the results of this analysis apply to production versions of the Philips L Prize entry.

Poplawski, Michael E.; Ledbetter, Marc R.; Smith, Mark

2012-04-24T23:59:59.000Z

277

Lighting in Residential and Commercial Buildings (1993 and 1995 Data)  

U.S. Energy Information Administration (EIA) Indexed Site

Types > 1995 CBECS Lighting Equipment Types > 1995 CBECS Lighting Equipment 1995 CBECS Lighting Equipment Profile Lighting Equipment - Type and Characteristics of Equipment Emits Found In Incandescent Incandescent Light Bulb Produces light by electrically heating a tungsten filament Includes energy-efficient incandescent bulbs, such as Reflector or R-Lamps (accent and task lighting), Parabolic Aluminized Reflector (PAR) lamps (flood and spot lighting), and Ellipsoidal Reflector (ER) lamps (recessed lighting) Highly inefficient because much of the energy is lost as heat 14-18 Lumens Per Watt (LPW) 14% of Lit Commercial Floorspace Standard Fluorescent Lighting with Magnetic Ballast Standard Fluorescent with Magnetic Ballast Produces light by passing electricity through mercury vapor, causing the fluorescent coating to glow or fluoresce

278

Commercial Cooling Par Engineering: Proposed Penalty (2013-CE-5312) |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Proposed Penalty (2013-CE-5312) Proposed Penalty (2013-CE-5312) Commercial Cooling Par Engineering: Proposed Penalty (2013-CE-5312) January 31, 2013 DOE alleged in a Notice of Proposed Civil Penalty that Commercial Cooling Par Engineering failed to certify walk-in cooler or freezer components as compliant with the energy conservation standards. DOE regulations require a manufacturer (which includes importers) to submit reports certifying that its products have been tested and meet the applicable energy conservation standards. This civil penalty notice advises the company of the potential penalties and DOE's administrative process, including the company's right to a hearing. Commercial Cooling Par Engineering: Proposed Penalty (2013-CE-5312) More Documents & Publications Commercial Cooling Par Engineering: Order (2013-CE-5312)

279

ADVISORY ALERT: Dekker, Ltd. Digital Signature - PARS II Reporting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ADVISORY ALERT: Dekker, Ltd. Digital Signature - PARS II Reporting ADVISORY ALERT: Dekker, Ltd. Digital Signature - PARS II Reporting As you know, to run reports in the PARS II, users must install an active X control to their workstations. The FIRST TIME a user attempts to run a report after installing the Active X control, a Security Warning will appear stating: That warning appears because, although the digital signature is valid, the digital signature is from a publisher (in this case Dekker, Ltd.) whom you have not yet chosen to trust. The following steps instruct you how to clear the security warning so that you may continue working with PARS II reports. Please note: Once you complete the process of accepting the Dekker, LTd. digital signature, this warning will not re-appear. This process must be done ONCE to "inform" your PC that Dekker, LTd. is an

280

Contractor-specific Documentation & Information in PARS II  

Energy.gov (U.S. Department of Energy (DOE))

DOE Office of Acquisition and Project Management established guidelines for documentation that should be available within PARS II through contractor-specific records that are not linked to any...

Note: This page contains sample records for the topic "reflector par lamps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

PARS II Process Document - DOE Period Close | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Period Close PARS II Process Document - DOE Period Close This document details the process adopted by the Office of Acquisition and Project Management to prepare APM DepSec...

282

PARS II Process Document - Project Phasing (Multiple CD-2 from...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Project Phasing (Multiple CD-2 from Single CD-1) PARS II Process Document - Project Phasing (Multiple CD-2 from Single CD-1) This document details the process by which projects...

283

PARS II Process Document - On Hold Projects | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

On Hold Projects PARS II Process Document - On Hold Projects This document details the process approved by the CRB for placing Capital Asset projects on hold, re-activating on hold...

284

PARS_UserManualV3t5.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Management, Budget, and Evaluation (OMBE) Management, Budget, and Evaluation (OMBE) Office of Engineering and Construction Management (OECM) March, 2005 User Manual version 3.5 Project Assessment and Reporting System (PARS) Table of Contents 1. INTRODUCTION ................................................................................................................... 6 1.1. WHAT IS PARS? .................................................................................................................6 1.1.1. Web Enabled Database.................................................................................................. 6 1.1.2. Reporting System........................................................................................................... 6 1.1.3. Assessment System.........................................................................................................

285

,,"PARS II Interim Migration Template"  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

" " ,,"PARS II Interim Migration Template" ,,"Fields","Data" ,,"DOE Project ID:","DOE Project # and Project Name" ,,"Year:","Please select a Year" ,,"Month:","Please select a Month" ,,"Fields","Data (Entered in $K) [Data Entry field]" ,,"BCWS ($K):",0 ,,"BCWP ($K):",0 ,,"ACWP ($K):",0 ,,"Management Reserves Remaining ($K):",0 ,,"Percent Complete (%):",0 ,,"Instructions" ,,"1. Log into PARS II" ,,"2. Select the appropriate Project" ,,"3. While still on the Projects screen, click on ""Attachments""" ,,"4. Click on ""Add"""

286

Treatability study for removal of leachable mercury in crushed fluorescent lamps  

SciTech Connect

Nonserviceable fluorescent lamps removed from radiological control areas at the Oak Ridge Department of Energy facilities have been crushed and are currently managed as mixed waste (hazardous and radiologically contaminated). We present proposed treatment flowsheets and supporting treatability study data for conditioning this solid waste residue so that it can qualify for disposal in a sanitary landfill. Mercury in spent fluorescent lamps occurs primarily as condensate on high-surface-area phosphor material. It can be solubilized with excess oxidants (e.g., hypochlorite solution) and stabilized by complexation with halide ions. Soluble mercury in dechlorinated saline solution is effectively removed by cementation with zero-valent iron in the form of steel wool. In packed column dynamic flow testing, soluble mercury was reduced to mercury metal and insoluble calomel, loading > 1.2 g of mercury per grain of steel wool before an appreciable breakthrough of soluble mercury in the effluent.

Bostick, W.D.; Beck, D.E.; Bowser, K.T. [and others

1996-02-01T23:59:59.000Z

287

Determination of mercury distribution inside spent compact fluorescent lamps by atomic absorption spectrometry  

Science Conference Proceedings (OSTI)

Highlights: Black-Right-Pointing-Pointer New treatments for CFL are required considering the aim of Directive 202/96/CE. Black-Right-Pointing-Pointer It is shown that most of the mercury introduced into a CFL is in the phosphor powder. Black-Right-Pointing-Pointer Experimental conditions for microwave-assisted sample digestion followed by AAS measurements are described. Black-Right-Pointing-Pointer By washing the glass it is possible to reduce the concentration below legal limits. - Abstract: In this study, spent compact fluorescent lamps were characterized to determine the distribution of mercury. The procedure used in this research allowed mercury to be extracted in the vapor phase, from the phosphor powder, and the glass matrix. Mercury concentration in the three phases was determined by the method known as cold vapor atomic absorption spectrometry. Median values obtained in the study showed that a compact fluorescent lamp contained 24.52 {+-} 0.4 ppb of mercury in the vapor phase, 204.16 {+-} 8.9 ppb of mercury in the phosphor powder, and 18.74 {+-} 0.5 ppb of mercury in the glass matrix. There are differences in mercury concentration between the lamps since the year of manufacture or the hours of operation affect both mercury content and its distribution. The 85.76% of the mercury introduced into a compact fluorescent lamp becomes a component of the phosphor powder, while more than 13.66% is diffused through the glass matrix. By washing and eliminating all phosphor powder attached to the glass surface it is possible to classified the glass as a non-hazardous waste.

Rey-Raap, Natalia [Departamento de Ingenieria Mecanica y Construccion, Universitat Jaume I de Castellon, Av. de Vicent Sos Baynat s/n, 12071 Castellon de la Plana, Espana (Spain); Gallardo, Antonio, E-mail: gallardo@emc.uji.es [Departamento de Ingenieria Mecanica y Construccion, Universitat Jaume I de Castellon, Av. de Vicent Sos Baynat s/n, 12071 Castellon de la Plana, Espana (Spain)

2012-05-15T23:59:59.000Z

288

Integrated-circuit control for two-lamp electronic ballast. Final report  

SciTech Connect

Circuitry is described for a solid-state, high-frequency fluorescent ballast designed to operate two F40 T-12 rapid-start lamps. The circuits are designed to be produced by hybrid integrated circuit (IC) technology. The signal components are produced on a single IC chip; the power transistors are attached to an alumina substrate. The initial IC version reduces the component count by about 50%. The cost of each IC in 500K lots is $0.70, replacing discrete parts costing $2.25. Additional savings of more than $1.00 per unit are realized by the decreased assembly time and improved reliability of the ICs. The system performance (two-lamp F40) was compared to the discrete version of the ballast and to an efficient core-coil ballast and found to be 6% less and 20% more efficient, respectively. The decrease in efficiency relative to the discrete version of the ballast is due to retaining some power to the filaments during operation in order to maintain normal lamp life.

Kohler, T.P.

1982-11-01T23:59:59.000Z

289

Solar receiver heliostat reflector having a linear drive and position information system  

DOE Patents (OSTI)

A heliostat for a solar receiver system comprises an improved drive and control system for the heliostat reflector assembly. The heliostat reflector assembly is controllably driven in a predetermined way by a light-weight drive system so as to be angularly adjustable in both elevation and azimuth to track the sun and efficiently continuously reflect the sun's rays to a focal zone, i.e., heat receiver, which forms part of a solar energy utilization system, such as a solar energy fueled electrical power generation system. The improved drive system includes linear stepping motors which comprise low weight, low cost, electronic pulse driven components. One embodiment comprises linear stepping motors controlled by a programmed, electronic microprocessor. Another embodiment comprises a tape driven system controlled by a position control magnetic tape.

Horton, Richard H. (Schenectady, NY)

1980-01-01T23:59:59.000Z

290

The development of large area saturable Bragg reflectors for the generation of widely-tunable ultra-short pulses  

E-Print Network (OSTI)

This thesis focuses on the realization of two photonic devices; 1) semiconductor lasers and 2) large area broadband Saturable Bragg Reflectors (SBRs). Semiconductor lasers explore the use of 3D and 2D quantum confinement ...

Nabanja, Sheila P

2012-01-01T23:59:59.000Z

291

Experimental and theoretical investigations on the warm-up of a high-pressure mercury discharge lamp  

SciTech Connect

Modern high-pressure discharge lamps are forced to provide instant light and hot relight capabilities - if possible at lower power units. A detailed understanding of the warm-up of high-pressure discharge lamps is therefore required. Complex fluid model codes were developed for the past years including more and more processes like two-dimensional treatment of convection trying to provide a more comprehensive and consistent description of high-pressure discharge lamps. However, there is a lack of experimental data to examine the performance of these models. This work provides a very complete set of geometrical, electrical, spectroscopic, and thermographic data according to the warm-up of a high-pressure mercury discharge lamp that is compared to the results of a state of the art fluid code. Quantitative agreement is achieved for single parameters like wall temperatures. But the paper also reveals the need for further investigations and improvements of the code.

Zalach, J.; Franke, St.; Schoepp, H. [Leibniz Institute for Plasma Science and Technology, Felix-Hausdorff-Str. 2, D-17489 Greifswald (Germany); Araoud, Z.; Charrada, K. [Unite d'Etude des Milieux Ionises et Reactifs, IPEIM, rte de Kairouan, 5019 Monastir (Tunisia); Zissis, G. [Laboratoire Plasma et Conversion d'Energie, 118 rte Narbonne, Bat3R2, 31062 Toulouse (France)

2011-03-15T23:59:59.000Z

292

Advanced ultraviolet-resistant silver mirrors for use in solar reflectors  

DOE Patents (OSTI)

A silver mirror construction that maintains a high percentage of hemispherical reflectance throughout the UV and visible spectrum when used in solar reflectors, comprising:a) a pressure sensitive adhesive layer positioned beneath a silver overlay;b) a polymer film disposed on the silver overlay;c) an adhesive layer positioned on the polymer film; andd) a UV screening acrylic film disposed on the adhesive layer.

Jorgensen, Gary J. (Pine, CO); Gee, Randy (Arvada, CO)

2009-11-03T23:59:59.000Z

293

Performance of electronic ballasts and other new lighting equipment: (Phase 2, The 34-watt F40 rapid start T-12 fluorescent lamp): Final report  

SciTech Connect

This study has measured the performance of energy-saving 34-watt F40, T-12, rapid-start, lite white fluorescent lamps being operated by solid-state ballasts and lighting control equipment. The performances of these lamp systems are compared with those of 40-watt F40, T-12 rapid-start cool white fluorescent lamp systems studied in the prior phase of this project. With the 34-watt F40 lamps and various solid-state ballasts, system efficacy ranged from 67 to 84 lumens per watt and ballast factor from 0.756 to 0.908. Average system efficacy using the 34-watt lamps exceeded that of systems using 40-watt lamps and the same solid-state ballasts by only 1 percent even though the 34-watt lamps is about 6 percent more efficacious than the 40-watt lamp. This apparent discrepancy is due to increased ballast losses when operating the 34-watt lamps. However, the systems efficacy of the 34-watt lamps used with a solid-state ballast exceeded that of a 34-watt, two-lamp system using the standard core-coil ballast by as much as 29 percent. A T-8 fluorescent lamp system with a smaller lamp diameter was also included in the study. Operating this lamp with a solid-state ballast produced a high system efficacy of 90 lumens per watt, a 39 percent improvement over the efficacy of a 40-watt F40 system using the standard core-coil ballast. The use of static controllers with 34-watt F40 lamps can result in excessive flickering (46 percent) and the generation of a second harmonic as high as 96 percent of the fundamental frequency. The dynamic controllers, when used to dim the 34-watt lamps generally cannot be dimmed as low as the 40-watt lamp system without flickering. In general, the 34-watt energy-saving lamps are appropriate as a retrofit to reduce illumination levels. However, for new construction, the 40-watt F40 argon filled lamps cost less, perform better, and provide a more reliable system. 5 refs., 27 figs., 9 tabs.

Verderber, R.R.; Morse, O.

1988-02-01T23:59:59.000Z

294

Criticality of a Neptunium-237 sphere surrounded with highly enriched uranium shells and an iron reflector  

SciTech Connect

An additional experiment has been performed using the recently cast 6-kg {sup 237}Np sphere. The experiment consisted of surrounding the neptunium sphere with highly enriched uranium and an iron reflector. The purpose of the critical experiment is to provide additional criticality data that can be used to validate criticality safety evaluations involving the deposition of neptunium. It is well known that {sup 237}Np is primarily produced by successive neutron capture events in {sup 235}U or through the (n, 2n) reaction in {sup 238}U. These nuclear reactions lead to the production of {sup 237}U, which decays by beta emission into {sup 237}Np. In addition, in the spent fuel, {sup 241}Am decays by alpha emission into {sup 237}Np. Because {sup 237}Np is a threshold fissioner, the best reflectors for critical systems containing neptunium are those materials that exhibit good neutron scattering properties such as low carbon steel (99 wt % Fe). In this experiment, the iron reflector reduced the amount of uranium used in the critical experiment and increased the importance of the neptunium sphere.

Sanchez, R. G. (Rene G.); Loaiza, D. J. (David J.); Hayes, D. K. (David K.); Kimpland, R. H. (Robert H.)

2004-01-01T23:59:59.000Z

295

Development and Testing of Abrasion Resistant Hard Coats For Polymer Film Reflectors: Preprint  

DOE Green Energy (OSTI)

Reflective polymer film technology can significantly reduce the cost of solar reflectors and installed Concentrated Solar Power (CSP) plants by both reduced material cost and lower weight. One challenge of polymer reflectors in the CSP environment pertains to contact cleaning methods typically used with glass mirrors. Such contact cleaning methods can scratch the surface of polymer reflectors and thereby reduce specular reflectance. ReflecTech, Inc. (a subsidiary of SkyFuel, Inc.) and the National Renewable Energy Laboratory (NREL) initiated a cooperative research and development agreement (CRADA) to devise and develop an abrasion resistant coating (ARC) suitable for deposition onto polymer based mirror film. A number of candidate ARC products were identified as candidate formulations. Industrial collaborators prepared samples having their ARCs deposited onto ReflecTech Mirror Film pre-laminated to aluminum sheet substrates. Samples were provided for evaluation and subjected to baseline (unweathered) and accelerated exposure conditions and subsequently characterized for abrasion resistance and adhesion. An advanced ARC product has been identified that exhibits outstanding initial abrasion resistance and adhesion to ReflecTech Mirror Film. These properties were also retained after exposure to the various accelerated stress conditions. This material has been successfully manufactured as a 1.5 m wide roll-to-roll construction in a production environment.

Jorgensen, G.; Gee, R.; DiGrazia, M.

2010-10-01T23:59:59.000Z

296

Design of Semiconductor-Based Back Reflectors for High Voc Monolithic Multijunction Solar Cells: Preprint  

DOE Green Energy (OSTI)

State-of-the-art multijunction cell designs have the potential for significant improvement before going to higher number of junctions. For example, the Voc can be substantially increased if the photon recycling taking place in the junctions is enhanced. This has already been demonstrated (by Alta Devices) for a GaAs single-junction cell. For this, the loss of re-emitted photons by absorption in the underlying layers or substrate must be minimized. Selective back surface reflectors are needed for this purpose. In this work, different architectures of semiconductor distributed Bragg reflectors (DBR) are assessed as the appropriate choice for application in monolithic multijunction solar cells. Since the photon re-emission in the photon recycling process is spatially isotropic, the effect of the incident angle on the reflectance spectrum is of central importance. In addition, the DBR structure must be designed taking into account its integration into the monolithic multijunction solar cells, concerning series resistance, growth economics, and other issues. We analyze the tradeoffs in DBR design complexity with all these requirements to determine if such a reflector is suitable to improve multijunction solar cells.

Garcia, I.; Geisz, J.; Steiner, M.; Olson, J.; Friedman, D.; Kurtz, S.

2012-06-01T23:59:59.000Z

297

Method of manufacturing large dish reflectors for a solar concentrator apparatus  

SciTech Connect

A method of manufacturing monolithic glass reflectors for concentrating sunlight in a solar energy system is disclosed. The method of manufacturing allows large monolithic glass reflectors to be made from float glass in order to realize significant cost savings on the total system cost for a solar energy system. The method of manufacture includes steps of heating a sheet of float glass positioned over a concave mold until the sheet of glass sags and stretches to conform to the shape of the mold. The edges of the dish-shaped glass are rolled for structural stiffening around the periphery. The dish-shaped glass is then silvered to create a dish-shaped mirror that reflects solar radiation to a focus. The surface of the mold that contacts the float glass preferably has a grooved surface profile comprising a plurality of cusps and concave valleys. This grooved profile minimizes the contact area and marring of the specular glass surface, reduces parasitic heat transfer into the mold and increases mold lifetime. The disclosed method of manufacture is capable of high production rates sufficiently fast to accommodate the output of a conventional float glass production line so that monolithic glass reflectors can be produced as quickly as a float glass production can make sheets of float glass to be used in the process.

Angel, Roger P (Tucson, AZ); Olbert, Blain H (Tucson, AZ)

2011-12-27T23:59:59.000Z

298

The formation of optical membrane reflector surfaces using uniform pressure loading  

DOE Green Energy (OSTI)

Potentially high quality optical reflector surfaces are attainable with the use of pressure formed membranes. Such reflector surfaces offer the prospect of very low weight and low cost. The formation of such surfaces, using initially flat circular membranes with uniform pressure loading, is studied in this paper. Finite axisymmetric deformations, along with both linear and nonlinear material response is considered. A wide range of focal-length-to-diameter ratios (above 0.6) are addressed and the structural/optical response mechanisms that lead to optical distortions relative to ideal parabolic reflector shapes are also considered. Results show that elastic material response can often lead to a significantly larger deviation from the ideal shape than will inelastic material response. This results primarily from the ability to limit stress nonuniformities when inelastic material response is operative. Furthermore, when under pressure loading the membrane focal length decreases monotonically with increasing radius for both linear and nonlinear material response. Further, the predicted focal length variation is increasingly nonlinear near the membrane support.

Murphy, L.M.; Tuan, C.

1987-08-01T23:59:59.000Z

299

Positron Accumulator Ring (PAR) power supply  

SciTech Connect

The Positron Accumulator Ring (PAR) consists of 8 dipole magnets connected in series. These magnets are energized via one 12-pulse dc power supply. The power supply consists of four phase controlled half-wave wye group converters. Each of the two half-wave converters are connected through an interphase transformer to obtain a full-wave converter with 120{degrees} conduction. The input voltage for these two half-wave converters are 180{degrees} apart. The two full-wave converters are connected in parallel through a third interphase transformer. This type of connection of the converters not only provides the required output current, it also improves the input power factor of the power supply. The output of the wye group converters is filtered through a passive L-R-C filter to reduce the ripple content of the output current. At low current values of the power supply the current ripple is high, thus a large filter is needed, which adds to the cost of the power supply, however at high output current levels, the current ripple is less severe. The large size of the filter can be reduced by adding an anti-parallel rectifier diode(D1) to the output of the power supply. A freewheeling diode(D2) is connected before the choke to circulate the current once the power supply is turned off. In order to measure the current in the magnet a high precision, low drift, zero flux current transductor is used. This transductor senses the magnet current which provides a feedback signal to control the gating of the converter`s thyristors. A true 14 bit Digital to Analog Converter (DAC) is programmed by the control computer for the required current value, providing a reference for the current regulator. Fast correction of the line transients is provided by a relatively fast voltage loop controlled by a high gain slow response current loop.

Fathizadeh, M.

1995-08-01T23:59:59.000Z

300

A New Rb Lamp Exciter Circuit for Rb atomic clocks and Studies on Transition from Ring to Red mode  

E-Print Network (OSTI)

In this paper we describe the development of novel RF exciter circuit for electrode less Rb lamp. The lamp exciter circuit is a RF oscillator with a a new configuration operating at 60 to 65 MHz frequency with 3 to 4 watt power. The Rb lamp is used in exciting the ground state hyperfine transitions in Rb atom in a glass cell placed inside a tuned microwave cavity, As the frequency of these hyperfine transitions is very stable it is used in the development of Rb atomic clock by phase locking the oven controlled crystal oscillator (OCXO) to this atomic transition frequency. The details of the Rb lamp exciter are presented in the paper.The Lamp is ideally operated in ring mode as in this mode the linewidth is narrow and there is no self reversal. However, high temperature and RF excitation power may drive the Rb lamp to red mode which gives rise to line broadening and self reversal. It is the experience that mode change from ring to red deteriorates the atomic signal strength and S/N. In this paper the reasons of mode change are also discussed.

Savita Singh; Bikash Ghosal; G M Saxena

2010-11-10T23:59:59.000Z

Note: This page contains sample records for the topic "reflector par lamps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Proposed Data Elements for PARS II Web Application  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Data Elements for PARS II Data Elements for PARS II Revised: July 27, 2009 - Version 5.1 This document should be printed on legal size paper, in landscape mode. 1.0 Overview The PARS II application will collect two major types of data from DOE Field Site and DOE Headquarters locations. The two types of data are called: (1) Oversight and Assessment Data and (2) Contractor Project Performance Data and are designed to provide information to support for the concepts and data elements represented by the DOE EVMS Gold Card 1 . A reproduction the relevant section of the Gold Card appears to the right. Performance Baseline (TPC) CBB + Profit Fee Non Contract Costs (Includes DOE Direct Costs) Contingency (DOE Held) Performance Measurement Baseline (PMB) Profit Fee (Contractor) Management

302

Microsoft PowerPoint - PARS II Deployment Discussion 20090416.ppt  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PARS II PARS II Deployment Discussion John Makepeace (OECM) Kai Mong (EES), Judith Bernsen (EES/PMC) April 16, 2009 2 Purpose * Review inclusion/exclusion of projects * Discuss the proposed schedule for transitioning projects PARS II Timeline 3 Target Dates * May 2009 - DOE-wide announcement * May 2009 - Contact Group 1 * Sep 2009 - Error free files from Group 1 * Dec 2009 - Group 1 repeatable process established * Feb 2010 - Groups 1-3 begin reporting * Sep 2010 - Group 9 begins reporting 4 5 Exclusion Criteria * Project was excluded if * Planned CD-4 date was on or before Sep 30 2010 * Project was at CD-0 or CD-1 with no planned CD-2 date on or before Sep 30 2010 * Project at CD-3 and more than 50% complete (schedule) * Project TPC < $20M 6 Grouping Criteria * Projects were grouped using the following

303

The Jamming point street-lamp in the world of granular media  

E-Print Network (OSTI)

The Jamming of soft spheres at zero temperature, the J-point, has been extensively studied both numerically and theoretically and can now be considered as a safe location in the space of models, where a street lamp has been lit up. However, a recent work by Ikeda et al, 2013 reveals that, in the Temperature/Packing fraction parameter space, experiments on colloids are actually rather far away from the scaling regime illuminated by this lamp. Is it that the J-point has little to say about real system? What about granular media? Such a-thermal, frictional, systems are a-priori even further away from the idealized case of thermal soft spheres. In the past ten years, we have systematically investigated horizontally shaken grains in the vicinity of the Jamming transition. We discuss the above issue in the light of very recent experimental results. First, we demonstrate that the contact network exhibits a remarkable dynamics, with strong heterogeneities, which are maximum at a packing fraction phi star, distinct and smaller than the packing fraction phi dagger, where the average number of contact per particle starts to increase. The two cross-overs converge at point J in the zero mechanical excitation limit. Second, a careful analysis of the dynamics on time scales ranging from a minute fraction of the vibration cycle to several thousands of cycles allows us to map the behaviors of this shaken granular system onto those observed for thermal soft spheres and demonstrate that some light of the J-point street-lamp indeed reaches the granular universe.

Corentin Coulais; Robert P. Behringer; Olivier Dauchot

2013-05-03T23:59:59.000Z

304

Super-radiance in the sodium resonance lines from sodium iodide arc lamps  

Science Conference Proceedings (OSTI)

Super-radiance observed within the centers of the sodium resonance D lines emitted by arc lamps containing sodium iodide as additive in a high-pressure mercury plasma environment was studied by high-resolution emission spectroscopy. The spectral radiance of these self-reversed lines including super-radiance was simulated by considering a local enhancement of the source function due to the presence of an additional source of radiation near the arc wall. Causes of this hitherto unrecognized source of radiation are given.

Karabourniotis, D. [Department of Physics, Institute of Plasma Physics, University of Crete, 71003 Heraklion (Greece); Drakakis, E. [Department of Electrical Engineering, Technological Educational Institute, Heraklion (Greece)

2010-08-09T23:59:59.000Z

305

A high-efficiency indirect lighting system utilizing the solar 1000 sulfur lamp  

SciTech Connect

High-lumen light sources represent unique challenges and opportunities for the design of practical and efficient interior lighting systems. High-output sources require a means of large-scale distribution and avoidance of high-luminance glare while providing efficient delivery. An indirect lighting system has been developed for use with a 1,000 Watt sulfur lamp that efficiently utilizes the high-output source to provide quality interior lighting. This paper briefly describes the design and initial testing of this new system.

Siminovitch, M.; Gould, C.; Page, E.

1997-06-01T23:59:59.000Z

306

Detecting antipersonnel mines with a handheld parabolic reflector transmitter/multistatic receiver impulse gpr  

DOE Green Energy (OSTI)

A novel handheld time-domain array GPR antipersonnel mine detection system using an offset paraboloidal reflector antenna is described. The reflector collimates rays from an ultra-wideband transmitting feed, directing the microwave impulse forward, in front of the antenna structure. As such, much of the ground reflected wave is directed further forward, away from the operator, the reflector, and the receiving antennas, and thereby reducing the major source of clutter. The wave transmitted into the ground that interacts with the target, generating significant backscatter returning toward the receiving antennas. These receiving antennas are configured in a 2 by 2 array to provide spatial focusing in both the along- and cross-track directions. This system has been built and tested at both Lawrence Livermore National Laboratory, and GeoCenters, Inc. In both cases, custom-built wideband antenna elements generate narrow pulse shapes, which allow for resolving small non-metallic targets buried at shallow depths. The LLNL's Micro-Power Impulse Radar (MIR) operates in the 1.5 to 5 GHz range a very narrow pulse shape. The Geo-Centers wideband TEMR antenna elements have higher power, though lower frequency range (850 to 1700 MHz), and generate less residual ringing in the time signal. Preliminary measured data from both systems indicate that the surface clutter is indeed reduced relative to the target signal, and that small non-metallic anti-personnel mines can be reliably detected at burial depths as shallow as 1 inch in both dry sand and dry vegetative clay loam soil.

Rappaport, C; Yang, B; Azevedo, S; Rosenbury, T; Gough, J; Dean, A

2000-04-10T23:59:59.000Z

307

Experimental methodology for determining the system performance of fluorescent lamp, ballast, fixture combinations operating under realistic application conditions  

SciTech Connect

To meet the need for accurate performance data, an experimental method for determining the performance of lamp, ballast, and luminaire combinations operating under a broad range of realistic conditions was developed. The methodology employs a two-part experimental procedure. The first part uses a temperature-controlled luminous flux integrator to characterize the thermal performance of each lamp/ballast combination. This performance characterization is expressed in terms of light output and efficacy as a function of variations in minimum lamp wall temperature (MLWT) and is generated for the range of temperatures typically encountered in interior lighting applications. The second procedure uses a luminaire/plenum simulator to determine the specific MLWT that exists in a particular luminaire application as a function of luminaire type, mounting configuration, plenum integration, and room air temperature. The MLWTs thus measured may be used in conjunction with the lamp/ballast performance data to determine application-specific values of light output and efficacy for a given lamp/ballast/luminaire system.

Siminovitch, M.J.; Rubinstein, F.M.; Verderber, R.R.

1984-11-01T23:59:59.000Z

308

High efficiency epitaxial optical reflector solar cells. Final subcontract report, 1 January 1990--31 October 1992  

DOE Green Energy (OSTI)

This report describes work to test the feasibility of a new solar cell concept -- the epitaxial optical reflector (EOR) solar cell. This cell concept alters current designs for high efficiency cells by changing the optical absorption efficiency of single cells. The change is introduced by the use an epitaxial multilayer reflector as an integral part of the cell to increase the optical path length of certain wavelengths of light in the cell. These changes are expected to increase the open circuit voltage at which power is extracted from the cell. The program is designed to test the feasibility of the use of a broad band epitaxial multilayer reflector grown as an integral part of the device structure to reflect the near-band-edge light back through the device for a second absorption pass. This second pass allows the design of a solar cell with a thinner base, and the use of the epitaxial reflector as a heterojunction carrier-reflecting barrier at the rear of the device. The thinner cell design and altered carrier profile that results from the light- and carrier-reflecting barrier will decrease the carrier concentration gradient and increase the open circuit voltage. The program is structured to have three tasks: (1) Solar Cell and Reflector Modeling, (2) Materials Growth and Optimization, and (3) Solar Cell Fabrication and Characterization.

Dapkus, P.D.; Hummel, S.G. [University of Southern California, Los Angeles, CA (United States)

1993-08-01T23:59:59.000Z

309

Ultracold neutron accumulation in a superfluid-helium converter with magnetic multipole reflector  

E-Print Network (OSTI)

We analyze accumulation of ultracold neutrons (UCN) in a superfluid-helium converter vessel surrounded by a magnetic multipole reflector. Employing formulas valid for trapped UCN in mechanical equilibrium we solved the rate equation and obtained results for the saturation density of low field seeking UCN for any field strength of the multipolar field. The addition of magnetic storage can increase the density and energy of the UCN produced and serves to mitigate the effects of wall losses on the source performance. This work was performed in preparation of the UCN source project SuperSUN at the ILL.

O. Zimmer; R. Golub

2013-03-08T23:59:59.000Z

310

High-frequency Light Reflector via Low-frequency Light Control  

E-Print Network (OSTI)

We show that the momentum of light can be reversed via the atomic coherence created by another light with one or two orders of magnitude lower frequency. Both the backward retrieval of single photons from a time-ordered Dicke state and the reflection of continuous waves by high-order photonic band gaps are analyzed. A proof-of-principle experiment with thermal Rb vapor is proposed based on presently available techniques. This holds promise for X-ray reflectors controlled by low-frequency light.

Wang, Da-Wei; Evers, Joerg; Scully, Marlan O

2013-01-01T23:59:59.000Z

311

Revisiting the Bragg reflector to illustrate some modern developments in optics  

E-Print Network (OSTI)

A series of thin layers of alternating refractive index is known to make a good optical mirror over certain bands of frequency. Such a device - often termed the Bragg reflector - is usually introduced to students within the first years of an undergraduate degree, often in isolation from other parts of the course. Here we show that the basic physics of wave propagation through a stratified medium can be used to illustrate some more modern developments in optics as well as quantum physics; from transfer matrix techniques, to the optical properties of cold trapped atoms, optomechanical cooling, and a simple example of a system exhibiting an appreciable level of optical non-reciprocity.

S. A. R. Horsley; J. -H. Wu; M. Artoni; G. C. La Rocca

2013-01-20T23:59:59.000Z

312

Performance of long-pulse source reference target-moderator-reflector configurations  

DOE Green Energy (OSTI)

We have calculated the performance of five similar target-moderator-reflector geometries that are reasonably well optimized for long-pulse source applications. For all cases, the moderators are fully coupled; that is, no poisons, decouplers, or liners are used. For each case, the energy- and time-dependent characteristics of the moderator source brightness have been parameteterized using empirical functions. These parameterizations have been made available to users of the Monte Carlo neutron scattering instrument design code MCLIB for use in evaluating the performance of neutron scattering instruments on a long-pulse source.

Pitcher, E.J.; Russell, G.J.; Seeger, P.A.; Ferguson, P.D.

1995-12-31T23:59:59.000Z

313

Beckman presents keynote address at ParCo2013 | Argonne National...  

NLE Websites -- All DOE Office Websites (Extended Search)

talk at the International Conference on Parallel Computing (ParCo2013) in Munich, Germany, September 10. Established in 1983, ParCo is one of the longest running international...

314

How to Submit a Request for a PARS II Account | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

How to Submit a Request for a PARS II Account How to Submit a Request for a PARS II Account How to Submit a Request for a PARS II Account The account access process for PARS II relies on the Department of Energy's MIS Application Gateway system to verify the requestor's identity and to approve his/her request for access to a specific DOE Headquarters application, such as PARS II. Once approved by the MIS Application Gateway, the PARS II Help Desk Administrator will assign a new PARS II account to the requestor. Please follow the steps listed below to apply for a PARS II account. 1. If the federal employee or contractor does not already have an account with the Department of Energy's MIS Application Gateway, then the requestor must apply for an account and be approved by a local federal sponsor. To

315

Method of controlling the mercury vapor pressure in a photo-chemical lamp or vapor filter used for Hg.sup.196 enrichment  

DOE Patents (OSTI)

The present invention is directed to a method of eliminating the cold spot zones presently used on Hg.sup.196 isotope separation lamps and filters by the use of a mercury amalgams, preferably mercury - indium amalgams. The use of an amalgam affords optimization of the mercury density in the lamp and filter of a mercury enrichment reactor, particularly multilamp enrichment reactors. Moreover, the use of an amalgam in such lamps and/or filters affords the ability to control the spectral line width of radiation emitted from lamps, a requirement for mercury enrichment.

Grossman, Mark W. (Belmont, MA)

1993-01-01T23:59:59.000Z

316

Method of controlling the mercury vapor pressure in a photo-chemical lamp or vapor filter used for Hg[sup 196] enrichment  

DOE Patents (OSTI)

The present invention is directed to a method of eliminating the cold spot zones presently used on Hg[sup 196] isotope separation lamps and filters by the use of a mercury amalgams, preferably mercury - indium amalgams. The use of an amalgam affords optimization of the mercury density in the lamp and filter of a mercury enrichment reactor, particularly multilamp enrichment reactors. Moreover, the use of an amalgam in such lamps and/or filters affords the ability to control the spectral line width of radiation emitted from lamps, a requirement for mercury enrichment.

Grossman, M.W.

1993-02-16T23:59:59.000Z

317

Class 8. Telomeres and PAR October 5, 2009 Boyd, et al., 1996  

E-Print Network (OSTI)

Class 8. Telomeres and PAR October 5, 2009 1 Telomeres A model Boyd, et al., 1996 #12;Class 8. Telomeres and PAR October 5, 2009 2 Spatial cue -> polarity Cuenca, A. A. et al. Development 2003://ftp.wormbase.org/pub/wormbase/datasets/seydoux_2003/MOVIE02%20PAR-6.mov #12;Class 8. Telomeres and PAR October 5, 2009 3 Cuenca, A. A. et al

Devoto, Stephen H.

318

COMPTEUR CERENKOV A GAZ POUR LECTRONS Par JACQUES SAYAG,  

E-Print Network (OSTI)

169 COMPTEUR CERENKOV A GAZ POUR �LECTRONS Par JACQUES SAYAG, Laboratoire de Physique Corpusculaire Cerenkov à fréon sous la pression atmosphérique, destiné à sélectionner, parmi les particules d'un faisceau courbe expérimentale obtenue en faisant fonctionner le compteur Cerenkov sur un faisceau négatif de

Paris-Sud XI, Université de

319

Application of ITO/Al reflectors for increasing the efficiency of single-crystal silicon solar cells  

Science Conference Proceedings (OSTI)

It is shown that an increase in the efficiency and manufacturability of single-junction single-crystal silicon photoelectric converters of solar energy requires the use of a back-surface reflector based on conductive transparent indium-tin oxide (ITO) 0.25-2 {mu}m thick. To increase the efficiency and reduce the sensitivity to the angle of light incidence on the photoreceiving surface of multijunction photoelectric converters with vertical diode cells based on single-crystal silicon, ITO/Al reflectors with an ITO layer >1 {mu}m thick along vertical boundaries of diode cells should be fabricated. The experimental study of multijunction photoelectric converters with ITO/Al reflectors at diode cell boundaries shows the necessity of modernizing the used technology of ITO layers to achieve their theoretically calculated thickness.

Kopach, V. R.; Kirichenko, M. V., E-mail: kirichenko_mv@mail.ru; Khrypunov, G. S.; Zaitsev, R. V. [National Technical University, 'Kharkiv Poly technical Institute' (Ukraine)

2010-06-15T23:59:59.000Z

320

MHD compressor---expander conversion system integrated with GCR inside a deployable reflector  

DOE Green Energy (OSTI)

This work originates from the proposal MHD Compressor-Expander Conversion System Integrated with a GCR Inside a Deployable Reflector''. The proposal concerned an innovative concept of nuclear, closed-cycle MHD converter for power generation on space-based systems in the multi-megawatt range. The basic element of this converter is the Power Conversion Unit (PCU) consisting of a gas core reactor directly coupled to an MHD expansion channel. Integrated with the PCU, a deployable reflector provides reactivity control. The working fluid could be either uranium hexafluoride or a mixture of uranium hexafluoride and helium, added to enhance the heat transfer properties. The original Statement of Work, which concerned the whole conversion system, was subsequently redirected and focused on the basic mechanisms of neutronics, reactivity control, ionization and electrical conductivity in the PCU. Furthermore, the study was required to be inherently generic such that the study was required to be inherently generic such that the analysis an results can be applied to various nuclear reactor and/or MHD channel designs''.

Tuninetti, G. (Ansaldo S.p.A., Genoa (Italy). Research Div.); Botta, E.; Criscuolo, C.; Riscossa, P. (Ansaldo S.p.A., Genoa (Italy). Nuclear Div.); Giammanco, F. (Pisa Univ. (Italy). Dipt. di Fisica); Rosa-Clot, M. (Florence Univ. (Italy). Dipt. di Fisica)

1989-04-20T23:59:59.000Z

Note: This page contains sample records for the topic "reflector par lamps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

A PROPOSAL FOR THE CONTROLLED RELEASE OF STORED ENERGY IN THE MTR REFLECTOR GRAPHITE  

SciTech Connect

A study of the stored energy buildup in the MTR reflector graphite and a program of controlled energy release is presented. Calculations, based on measurements of samples from the pebble zone show that an inadvertent spontaneous stored energy release would cause a temperature rise of 90 deg F in the pebble zone. The maximum transient structure temperatures resulting from a worst credible accidental release of energy would be less than allowable at present (except for possible damage to neutron detector chambers) but could exceed this value in five years. It is proposed that the stored energy be released by thermal annealing. The reflector graphite is heated by reducing the air flow and operating the reactor at low power until a temperature of 500 deg F is reached, at which point the reactor is scrammed. Normal cooling is provlded after 15 minutes at peak anneal temperature or if the temperature rises to 600 deg F. Health physics monitoring includes continuous measurement of particulate and of Ci/sup 4/ activity. Sustained oxidatlon, if it occurs, wlll be detected with a C0/sub 2/ monitor and controlled by smothering. An estimated 2 or 3 days of MTR operating time will be needed of which the anneal itself wlll require about one day. (auth)

Fast, E.; Smith, E.O.; Ford, J.D.

1959-12-09T23:59:59.000Z

322

Energy Savings and NOx Emissions Reduction Potential from the 2012 Federal Legislation to Phase Out Incandescent Lamps in Texas  

E-Print Network (OSTI)

This report provides detailed information about the potential savings from the 2012 Federal Legislation to phase out incandescent lamps and the NOx emissions reduction from the replacement of incandescent bulbs with Compact Fluorescent Lamps (CFL). In Texas, this analysis includes the savings estimates from both the annual and Ozone Season Day (OSD) NOx reductions. The NOx emissions reduction in this analysis are calculated using estimated emissions factors for 2007 from the US Environmental Protection Agency (US EPA) eGRID database, which had been specially prepared for this purpose.

Liu, Zi; Baltazar, Juan Carlos; Haberl, Jeff; Soman, Rohit

2010-03-01T23:59:59.000Z

323

THERMAL ANNEALING OF ZNO FILMS USING HIGH-DENSITY PLASMA ARC LAMPS  

Science Conference Proceedings (OSTI)

Nanostructured materials are rarely synthesized with appropriate phase and/or morphology. In this study, critical additional of as-synthesized nanostructured materials, such as annealing and/or activation of dopants, are addressed using infrared plasma arc lamps (PAL) over areas as large as 1,000 cm2. The broad spectral range of the PAL and the spectral variation of light absorption in nanostructured materials make the selection of processing parameters extremely difficult, posing a major technological barrier. In this study, the measurement of the surface temperature using various techniques for ZnO films on crystalline silicon wafers is discussed. An energy transport model for the simulation of rapid thermal processing using PAL is presented. The experimental and computational results show that the surface temperature cannot be measured directly and that computer simulation results are an effective tool for obtaining accurate data on processing temperatures.

Sabau, Adrian S [ORNL; Dinwiddie, Ralph Barton [ORNL; Xu, Jun [ORNL; Angelini, Joseph Attilio [ORNL; Harper, David C [ORNL

2011-01-01T23:59:59.000Z

324

NIST energy related inventions: Electronic starter device for fluorescent lamps. Interim report, August--October, 1997  

SciTech Connect

From the Scope of Work document which accompanied the original proposal, three silicon devices were anticipated for development, simulation, and quality assurance fabrication. The status of these are in the same format as the Scope of Work...Attachment-A-: Task 1--design and simulation; Task 2--prototype tooling; Task 3--test engineering; Task 4--product tooling; Task 5--package tooling/manufacturing design and assembly. It is felt the program will meet it`s stated goals of producing a low cost, high performance fluorescent lamp starter which will lower the acquisition and operating cost of fluorescent technology...thus saving significant amounts of energy. The likelihood of success is even greater, now that the TN22 component has been qualified. The challenges of creating a custom ASIC, while still significant, are within the skill and expertise level or the assigned engineers.

Johnson, S.A.

1997-12-01T23:59:59.000Z

325

Mercury reduction studies to facilitate the thermal decontamination of phosphor powder residues from spent fluorescent lamps  

SciTech Connect

This work investigates the thermal release of mercury from phosphor powder of spent fluorescent lamps. The treatment conditions and the ability of various reducing agents (primarily sodium borohydride) to lower the overall heating temperature required to improve the release of Hg have been evaluated. Hg species in samples were monitored in a thermal desorption atomic absorption spectrometer system, and total mercury was analyzed in a cold vapor atomic absorption spectrometer. Sodium borohydride was the best reducing agent among the ones studied. However, citric acid presented a high capacity to weaken mercury bonds with the matrix. When the sample was crushed with sodium borohydride for 40 min in a mass ratio of 10:1 (sample:reducing agent) and submitted to thermal treatment at 300 deg. C for 2 h, the concentration of mercury in a phosphor powder sample with 103 mg kg{sup -1} of mercury reached 6.6 mg kg{sup -1}.

Alves Durao, Walter [Chemistry Department, Federal University of Minas Gerais (UFMG), Cidade Universitaria 30.123-970 Belo Horizonte, MG (Brazil); Andreva de Castro, Camila [Chemistry Engineering Department, Federal University of Minas Gerais (UFMG) (Brazil); Carvalhinho Windmoeller, Claudia [Chemistry Department, Federal University of Minas Gerais (UFMG), Cidade Universitaria 30.123-970 Belo Horizonte, MG (Brazil)], E-mail: claucw@netuno.lcc.ufmg.br

2008-11-15T23:59:59.000Z

326

Archaeological data visualization in VR: analysis of lamp finds at the great temple of petra, a case study  

Science Conference Proceedings (OSTI)

We present the results of an evaluation of the ARCHAVE system, an immersive virtual reality environment for archaeological research. ARCHAVE is implemented in a Cave. The evaluation studied researchers analyzing lamp and coin finds throughout the excavation ... Keywords: archaeological data analysis, immersive virtual reality interfaces, scientific visualization

Daniel Acevedo; Eileen Vote; David H. Laidlaw; Martha S. Joukowsky

2001-10-01T23:59:59.000Z

327

PARS II Reports Catalog, V 0.02  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Catalog, V 0.02 Catalog, V 0.02 Tuesday, May 3, 2011 U.S. Department of Energy Project Assessment and Reporting System Reports Catalog Version 0.02 This booklet describes each report in PARS II, including those created specifically for the DOE, and those that come standard with the Dekker PMIS(tm) software package. Each report description is followed by an image or images of the report. 2 Introduction This document contains detailed description and specifications of all reports currently available in PARS II Shared Reports. All reports are distributed in logical folders that relate to a report's general use and this document will help the user to identify specific report that would address individual need. While all reports listed in the document are available to all users, below are some general guidelines as to the usefulness

328

Microsoft Word - PARS II CPP Upload Requirements.docx  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U U C (C Pro U.S. D Contrac CPP) U oject A S Phon Depart ctor Pr Upload Assessm System Vers Ap Su Energy E 20440 Cent German ne 301-916- ww tment roject P d Requ ment a m (PAR sion 1.4 Dr pril 9, 2010 ubmitted by nterprise So tury Blvd. S ntown, MD -0050 Fax ww.eesllc.ne t of En Perform uireme and Re RS II) raft 0 : olutions Suite 150 20874 301-916-00 et nergy mance ents for eportin 66 y e r ng ii Title Page Document Name: Contractor Project Performance (CPP) Upload Requirements for PARS II, V1.4 Publication Date: April 9, 2010 Contract Number: DE-AT01-06IM00102 Project Number: 1ME07, CLIN 2 Prepared by: Steven Ducharme, PMC, LLC Lenore Morrison, PMC, LLC Judith Bernsen, PMC, LLC Edited by: Dennis Stoner, EES, LLC Reviewed by: Mark Landry, Dekker, LTD

329

Power transient analyses of experimental in-reflector devices during safety shutdown in Jules Horowitz Reactor (JHR)  

Science Conference Proceedings (OSTI)

The Jules Horowitz Reactor (JHR) is designed to be a 100 MW material testing reactor (MTR) and it is expected to become the reference facility in the framework of European nuclear research activity. As the core neutron spectrum is quite fast, several experimental devices concerning fuel studies have been conceived to be placed in the reflector in order to exploit a proper thermal neutron flux irradiation. Since the core power is relatively high, the neutronic coupling between the reactor core and the reflector devices has to be taken into account for different rod insertions. In fact the thermal power produced within the fuel samples is considerable. Heat removal during shutdown is a main topic in nuclear safety and it is worth to analyse thermal power transients in fuel samples as well. Here a thermal hydraulic model for JHR core is proposed aiming at a simple and representative description as far as reactivity feedbacks are concerned. Then it is coupled with a neutronic pointwise kinetics analysis by means of the DULCINEE code to compute core power transient calculations. Moreover, some reflector-core coupling evaluations are performed through Monte Carlo method using the TRIPOLI 4.7 code. The JHR equilibrium cycle is considered with respect to four fuel compositions namely Beginning of Cycle (BOC), Xenon Saturation Point (XSP), Middle of Cycle (MOC) and End of Cycle (EOC). Then thermal power transients in the experimental reflector devices are evaluated during safety shutdowns and they are verified for all these cycle steps. (authors)

Camprini, P. C.; Sumini, M. [Univ. of Bologna (Italy); Artioli, C. [National Agency for New Technologies, Energy and Sustainable Economic Development ENEA (Italy); Gonnier, C.; Pouchin, B.; Bourdon, S. [Atomic Energy Commission CEA (France)

2012-07-01T23:59:59.000Z

330

Seismic evidence for a chemical heterogeneity in the mid-mantle: a strong and slightly dipping seismic reflector  

E-Print Network (OSTI)

to provide robust inference. Moreover, slab associated high-velocity anomalies (hereafter referred to as HVAs, there are no HVAs observed around the mid-lower mantle reflectors [Kaneshima and Helffrich, 1998]. As these strong confirmed, several interesting speculations might be made from our observations. The presence of the HVAs

Kawakatsu, Hitoshi

331

Greek research reactor performance characteristics after addition of beryllium reflector and LEU fuel  

SciTech Connect

The GRR-1 is a 5-MW pool-type, light-water-moderated and-cooled reactor fueled with MTR-type fuel elements. Recently received Be reflector blocks will soon be added to the core to add additional reactivity until fresh LEU fuel arrives. REBUS-3 xy fuel cycle analyses, using burnup dependent cross sections, were performed to assist in fuel management decisions for the water- and Be-reflected HEU nonequilibrium cores. Cross sections generated by EPRI-CELL have been benchmarked to identical VIM Monte Carlo models. The size of the Be-reflected LEU core has been reduced to 30 elements compared to 35 for the HEU water-reflected core, and an equilibrium cycle calculation has been performed.

Deen, J.R.; Snelgrove, J.L. (Argonne National Lab., IL (United States)); Papastergiou, C. (National Center for Scientific Research, Athens (Greece))

1992-01-01T23:59:59.000Z

332

Greek research reactor performance characteristics after addition of beryllium reflector and LEU fuel  

SciTech Connect

The GRR-1 is a 5-MW pool-type, light-water-moderated and-cooled reactor fueled with MTR-type fuel elements. Recently received Be reflector blocks will soon be added to the core to add additional reactivity until fresh LEU fuel arrives. REBUS-3 xy fuel cycle analyses, using burnup dependent cross sections, were performed to assist in fuel management decisions for the water- and Be-reflected HEU nonequilibrium cores. Cross sections generated by EPRI-CELL have been benchmarked to identical VIM Monte Carlo models. The size of the Be-reflected LEU core has been reduced to 30 elements compared to 35 for the HEU water-reflected core, and an equilibrium cycle calculation has been performed.

Deen, J.R.; Snelgrove, J.L. [Argonne National Lab., IL (United States); Papastergiou, C. [National Center for Scientific Research, Athens (Greece)

1992-12-31T23:59:59.000Z

333

Revisiting the Bragg reflector to illustrate some modern developments in optics  

E-Print Network (OSTI)

A dielectric composed of a sequence of similar thin layers of alternating refractive index is well known to make a good mirror when radiation close to normal incidence has a wavelength within the medium of around four times the layer thickness. Such a device - often termed the Bragg reflector - is usually introduced to students within the first years of an undergraduate degree, and often in isolation from other parts of the course. Here we show that the basic physics of wave propagation through a stratified medium can be used to illustrate some more modern developments in optics as well as quantum physics; from transfer matrix techniques, to the optical properties of cold trapped atoms, optomechanical cooling, and a simple example of a system exhibiting an appreciable level of optical non{reciprocity.

Horsley, S A R; Artoni, M; La Rocca, G C

2013-01-01T23:59:59.000Z

334

Stationary concentrators for tubular evacuated receivers: optimization and comparison of reflector designs  

SciTech Connect

Tubular evacuated receivers such as those manufactured by Owens-Illinois and General Electric Company offer considerable potential for cost-effective solar collectors for heating and cooling and for industrial process heat applications. The receivers were originally introduced in collectors having simple reflector shapes to augment the receiver tube area presented to the sun. More recent commercial collectors use nonimaging concentrators. Comparisons of the optical efficiencies of the different collector designs are presented as a function of incident angle, and the factors which determine the optical performance of a given concentrator design are discussed. Although different concentrator designs would be recommended for various combinations of receiver characteristics, collector materials, manufacturing costs and operating temperatures, it is clear that optimized nonimaging concentrators, originated by Winston and further developed at both the University of Chicago and Argonne National Laboratory offer substantial advantages over other concentrator designs for the concentration ratios of interest.

McIntire, W.R.

1980-01-01T23:59:59.000Z

335

Reactivity Accountability Attributed to Reflector Poisons in the High Flux Isotope Reactor  

Science Conference Proceedings (OSTI)

The objective of this study is to develop a methodology to predict the reactivity impact as a function of outage time between cycles of 3He, 6Li, and other poisons in the High Flux Isotope Reactor s (HFIR) beryllium reflector. The reactivity worth at startup of the HFIR has been incorrectly predicted in the past after the reactor has been shut-down for long periods of time. The incorrect prediction was postulated to be due to the erroneous calculation of 3He buildup in the beryllium reflector. It is necessary to develop a better estimate of the start-of-cycle symmetric critical control element positions since if the estimated and actual symmetrical critical control element positions differ by more than $1.55 in reactivity (approximately one-half inch in control element startup position), HFIR is to be shutdown and a technical evaluation is performed to resolve the discrepancy prior to restart. 3He is generated and depleted during operation, but during an outage, the depletion of 3He ceases because it is a stable isotope. 3He is born from the radioactive decay of tritium, and thus the concentration of 3He increases during shutdown. SCALE, specifically the TRITON and CSAS5 control modules including the KENO V.A, COUPLE, and ORIGEN functional modules were utilized in this study. An equation relating the down time (td) to the change in symmetric control element position was generated and validated against measurements for approximately 40 HFIR operating cycles. The newly-derived correlation was shown to improve accuracy of predictions for long periods of down time.

Chandler, David [ORNL; Maldonado, G Ivan [ORNL; Primm, Trent [ORNL

2009-12-01T23:59:59.000Z

336

Glossary - U.S. Energy Information Administration (EIA)  

U.S. Energy Information Administration (EIA)

Included in this category are the familiar screw-in light bulbs, as well as somewhat more efficient lamps, such as tungsten halogen lamps, reflector ...

337

PARS II Data Extraction Utility Version 8.0.20130510 Release Notes  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PARS II Data Extraction Utility PARS II Data Extraction Utility Version 8.0.20130510 Release Notes The Department of Energy (DOE) is pleased to announce the newest version of the DOE PARS II Data Extraction Utility, version 8.0.20130510. The Extraction Utility is used for retrieving project management data from a variety of source systems for upload into the DOE Project Assessment and Reporting System (PARS II). This release is a minor update and incorporates a number of new features and updates primarily focused to improve the existing functionality. Specifically, this version includes enhancements for sites and contractors using Deltek COBRA 4X/5.0 for the Earned Value (EV) Management system to provide EV data to DOE via PARS II upload. The quality of each DOE PARS II Extraction Utility release is of primary consideration at the

338

Criticality Safety Analysis on the Mixed Be, Nat-U, and C (Graphite) Reflectors in 55-Gallon Waste Drums and Their Equivalents for HWM Applications  

DOE Green Energy (OSTI)

The objective of this analysis is to develop and establish the technical basis on the criticality safety controls for the storage of mixed beryllium (Be), natural uranium (Nat-U), and carbon (C)/graphite reflectors in 55-gallon waste containers and/or their equivalents in Hazardous Waste Management (HWM) facilities. Based on the criticality safety limits and controls outlined in Section 3.0, the operations involving the use of mixed-reflector drums satisfy the double-contingency principle as required by DOE Order 420.1 and are therefore criticality safe. The mixed-reflector mass limit is 120 grams for each 55-gallon drum or its equivalent. a reflector waiver of 50 grams is allowed for Be, Nat-U, or C/graphite combined. The waived reflectors may be excluded from the reflector mass calculations when determining if a drum is compliant. The mixed-reflector drums are allowed to mix with the typical 55-gallon one-reflector drums with a Pu mass limit of 120 grams. The fissile mass limit for the mixed-reflector container is 65 grams of Pu equivalent each. The corresponding reflector mass limits are 300 grams of Be, and/or 100 kilograms of Nat-U, and/or 110 kilograms of C/graphite for each container. All other unaffected control parameters for the one-reflector containers remain in effect for the mixed-reflector drums. For instance, Superior moderators, such as TrimSol, Superla white mineral oil No. 9, paraffin, and polyethylene, are allowed in unlimited quantities. Hydrogenous materials with a hydrogen density greater than 0.133 gram/cc are not allowed. Also, an isolation separation of no less than 76.2 cm (30-inch) is required between a mixed array and any other array. Waste containers in the action of being transported are exempted from this 76.2-cm (30-inch) separation requirement. All deviations from the CS controls and mass limits listed in Section 3.0 will require individual criticality safety analyses on a case-by-case basis for each of them to confirm their criticality safety prior to their deployment and implementation.

Chou, P

2011-12-14T23:59:59.000Z

339

Microsoft Word - PARS II 102 Training Workbook V1.0.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Project Assessment and Reporting System PARS II 102 Monthly Updating and Reporting Training Workbook V1.0 Department of Energy May 10, 2010 May 10, 2010 PARS II 102 Monthly Updating and Reporting V1.0 ii May 10, 2010 PARS II 102 Monthly Updating and Reporting V1.0 iii Table of Contents OVERSIGHT and ASSESSMENT ........................................................................................................ 1 Exercise 1 Find and View a Project ............................................................................................. 1 Sort the Project List ................................................................................................................. 3

340

Application of a three-dimensional model for a study of the energy transfer of a high-pressure mercury horizontal lamp  

Science Conference Proceedings (OSTI)

This paper is devoted to study the dynamics of a discharge lamp with high intensity in a horizontal position. As an example of application, we chose the high-pressure mercury lamp. For this, we realized a three-dimensional model, a stable and powered DC. After the validation of this model, we used it to reproduce the influence of some parameters that have appeared on major transport phenomena of mass and energy in studying the lamp operating in a horizontal position. Indeed, the mass of mercury and the electric current are modified and the effect of convective transport is studied.

Ben Hamida, M. B.; Charrada, K. [Unite d'Etude des Milieux Ionises et Reactifs, IPEIM, 5019 route de Kairouan Monastir (Tunisia)

2012-06-15T23:59:59.000Z

Note: This page contains sample records for the topic "reflector par lamps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Reflector Technology Development and System Design for Concentrating Solar Power Technologies  

DOE Green Energy (OSTI)

Alcoa began this program in March of 2008 with the goal of developing and validating an advanced CSP trough design to lower the levelized cost of energy (LCOE) as compared to existing glass based, space-frame trough technology. In addition to showing a pathway to a significant LCOE reduction, Alcoa also desired to create US jobs to support the emerging CSP industry. Alcoa's objective during Phase I: Concept Feasibility was to provide the DOE with a design approach that demonstrates significant overall system cost savings without sacrificing performance. Phase I consisted of two major tasks; reflector surface development and system concept development. Two specific reflective surface technologies were investigated, silver metallized lamination, and thin film deposition both applied on an aluminum substrate. Alcoa prepared samples; performed test validation internally; and provided samples to the NREL for full-spectrum reflectivity measurements. The final objective was to report reflectivity at t = 0 and the latest durability results as of the completion of Phase 1. The target criteria for reflectance and durability were as follows: (1) initial (t = 0), hemispherical reflectance >93%, (2) initial spectral reflectance >90% for 25-mrad reading and >87% for 7-mrad reading, and (3) predicted 20 year durability of less than 5% optical performance drop. While the results of the reflective development activities were promising, Alcoa was unable to down-select on a reflective technology that met the target criteria. Given the progress and potential of both silver film and thin film technologies, Alcoa continued reflector surface development activities in Phase II. The Phase I concept development activities began with acquiring baseline CSP system information from both CSP Services and the DOE. This information was used as the basis to develop conceptual designs through ideation sessions. The concepts were evaluated based on estimated cost and high-level structural performance. The target criteria for the concept development was to achieve a solar field cost savings of 25%-50% thereby meeting or exceeding the DOE solar field cost savings target of $350/m2. After evaluating various structural design approaches, Alcoa down-selected to a monocoque, dubbed Wing Box, design that utilizes the reflective surface as a structural, load carrying member. The cost and performance potential of the Wing Box concept was developed via initial finite element analysis (FEA) and cost modeling. The structural members were sized through material utilization modeling when subjected to representative loading conditions including wind loading. Cost modeling was utilized to refine potential manufacturing techniques that could be employed to manufacture the structural members. Alcoa concluded that an aluminum intensive collector design can achieve significant cost savings without sacrificing performance. Based on the cost saving potential of this Concept Feasibility study, Alcoa recommended further validation of this CSP approach through the execution of Phase II: Design and Prototype Development. Alcoa Phase II objective was to provide the DOE with a validated CSP trough design that demonstrates significant overall system cost savings without sacrificing performance. Phase II consisted of three major tasks; Detail System Design, Prototype Build, and System Validation. Additionally, the reflector surface development that began in Phase I was continued in Phase II. After further development work, Alcoa was unable to develop a reflective technology that demonstrated significant performance or cost benefits compared to commercially available CSP reflective products. After considering other commercially available reflective surfaces, Alcoa selected Alano's MIRO-SUN product for use on the full scale prototype. Although MIRO-SUN has a lower specular reflectivity compared to other options, its durability in terms of handling, cleaning, and long-term reflectivity was deemed the most important attribute to successfully validate Alcoa's advanced trough archi

Adam Schaut

2011-12-30T23:59:59.000Z

342

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

31 - 2740 of 26,777 results. 31 - 2740 of 26,777 results. Download Microsoft Word- AL2005-01.doc http://energy.gov/management/downloads/microsoft-word-al2005-01doc Download EIS-0346: EPA Notice of Availability of the Draft Environmental Impact Statement Salmon Creek Project, Water Flow Restoration and Streambed Rehabilitation, Providing Passage for Summer Steelhead and Spring Chinook, Funding, Okanogan County, Washington http://energy.gov/nepa/downloads/eis-0346-epa-notice-availability-draft-environmental-impact-statement Download DuraLamp USA: Order (2010-CE-0912) DOE ordered DuraLamp USA, Inc. to pay a $2,500 civil penalty after finding DuraLamp USA had failed to certify that model PAR 30, an incandescent reflector lamp, complies with the applicable energy conservation standards.

343

All General Counsel Reports | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

November 1, 2010 November 1, 2010 Innovative Concept Appliances: Order (2010-CE-03/0415) DOE issued an Order after entering into a Compromise Agreement with Innovative Concept Appliances, LLC. to resolve a case involving the failure to certify that a variety of residential clothes washers and clothes dryers comply with the applicable energy conservation standards. October 29, 2010 DuraLamp USA: Order (2010-CE-0912) DOE ordered DuraLamp USA, Inc. to pay a $2,500 civil penalty after finding DuraLamp USA had failed to certify that model PAR 30, an incandescent reflector lamp, complies with the applicable energy conservation standards. October 29, 2010 GE-Prolec CCE Meeting October 19,2010 GE-Prolec CCE meeting of October 19, 2010 concerning Docket No. EERE-2010-BT-CE-0014 October 28, 2010

344

Effect of antimony nano-scale surface-structures on a GaSb/AlAsSb distributed Bragg reflector  

SciTech Connect

Effects of antimony crystallization on the surface of GaSb during low temperature molecular beam epitaxy growth are investigated. The geometry of these structures is studied via transmission electron and atomic force microscopies, which show the surface metal forms triangular-shaped, elongated nano-wires with a structured orientation composed entirely of crystalline antimony. By depositing antimony on a GaSb/AlAsSb distributed Bragg reflector, the field is localized within the antimony layer. Polarization dependent transmission measurements are carried out on these nano-structures deposited on a GaSb/AlAsSb distributed Bragg reflector. It is shown that the antimony-based structures at the surface favor transmission of light polarized perpendicular to the wires.

Husaini, S.; Shima, D.; Ahirwar, P.; Rotter, T. J.; Hains, C. P.; Dang, T.; Bedford, R. G.; Balakrishnan, G. [Air Force Research Laboratory, Sensors Directorate, Wright-Patterson AFB, Dayton, OH 45433 (United States)] [Air Force Research Laboratory, Sensors Directorate, Wright-Patterson AFB, Dayton, OH 45433 (United States)

2013-02-11T23:59:59.000Z

345

Midtemperature solar systems test facility predictions for thermal performance based on test data. Toltec two-axis tracking solar collector with 3M acrylic polyester film reflector surface  

DOE Green Energy (OSTI)

Thermal performance predictions based on test data are presented for the Toltec solar collector, with acrylic film reflector surface, for three output temperatures at five cities in the United States.

Harrison, T.D.

1981-06-01T23:59:59.000Z

346

Midtemperature solar systems test facility predictions for thermal performance based on test data. Polisolar Model POL solar collector with glass reflector surface  

DOE Green Energy (OSTI)

Thermal performance predictions based on test data are presented for the Polisolar Model POL solar collector, with glass reflector surfaces, for three output temperatures at five cities in the United States.

Harrison, T.D.

1981-05-01T23:59:59.000Z

347

Mechanical design of PlayLamp : a minimally intrusive device for recording the behavior of children at-risk of developmental disorders  

E-Print Network (OSTI)

This thesis paper documents the design process, decisions, and outcomes of the design of the physical form factor of PlayLamp, a device for video and audio recording the development of children at-risk of having developmental ...

Steger, Stephen Andrew

2008-01-01T23:59:59.000Z

348

Weathering characteristics of potential solar reflector materials: a survey of the literature  

DOE Green Energy (OSTI)

A review of the available literature on the weatherability/durability of materials with possible applications in solar reflectors is summarized. A number of techniques used to weather solar materials are reviewed. These include both natural and simulated weathering. Little correlation has been shown to exist between natural and accelerated weathering, and much work needs to be done before results of accelerated aging tests can be used with confidence to predict material lifetimes under outdoors exposure conditions. Some of the techniques used to measure or monitor material degradation are discussed. Emphasis in the literature has been placed chiefly on mechanical properties or appearance oriented measurements. The need is apparent for more detailed optical measurements of materials properties that are directly useful in engineering design. Although a great deal of literature is available on the materials described in the survey, there is very little solid data on the properties important for solar applications. A brief discussion of some of the applicable data on polymeric materials and glass is presented and referenced. The importance of cleaning solar materials is emphasized and some attempts at modeling degradation are discussed.

Hampton, H.L.; Lind, M.A.

1978-09-01T23:59:59.000Z

349

Graphite and Beryllium Reflector Critical Assemblies of UO2 (Benchmark Experiments 2 and 3)  

SciTech Connect

INTRODUCTION A series of experiments was carried out in 1962-65 at the Oak Ridge National Laboratory Critical Experiments Facility (ORCEF) for use in space reactor research programs. A core containing 93.2 wt% enriched UO2 fuel rods was used in these experiments. The first part of the experimental series consisted of 252 tightly-packed fuel rods (1.27-cm triangular pitch) with graphite reflectors [1], the second part used 252 graphite-reflected fuel rods organized in a 1.506-cm triangular-pitch array [2], and the final part of the experimental series consisted of 253 beryllium-reflected fuel rods in a 1.506-cm-triangular-pitch configuration and in a 7-tube-cluster configuration [3]. Fission rate distribution and cadmium ratio measurements were taken for all three parts of the experimental series. Reactivity coefficient measurements were taken for various materials placed in the beryllium reflected core. All three experiments in the series have been evaluated for inclusion in the International Reactor Physics Experiment Evaluation Project (IRPhEP) [4] and the International Criticality Safety Benchmark Evaluation Project (ICSBEP) Handbooks, [5]. The evaluation of the first experiment in the series was discussed at the 2011 ANS Winter meeting [6]. The evaluations of the second and third experiments are discussed below. These experiments are of interest as benchmarks because they support the validation of compact reactor designs with similar characteristics to the design parameters for a space nuclear fission surface power systems [7].

Margaret A. Marshall; John D. Bess

2012-11-01T23:59:59.000Z

350

Monte Carlo analysis of a monolithic interconnected module with a back surface reflector  

DOE Green Energy (OSTI)

Recently, the photon Monte Carlo code, RACER-X, was modified to include wave-length dependent absorption coefficients and indices of refraction. This work was done in an effort to increase the code`s capabilities to be more applicable to a wider range of problems. These new features make RACER-X useful for analyzing devices like monolithic interconnected modules (MIMs) which have etched surface features and incorporates a back surface reflector (BSR) for spectral control. A series of calculations were performed on various MIM structures to determine the impact that surface features and component reflectivities have on spectral utilization. The traditional concern of cavity photonics is replaced with intra-cell photonics in the MIM design. Like the cavity photonic problems previously discussed, small changes in optical properties and/or geometry can lead to large changes in spectral utilization. The calculations show that seemingly innocuous surface features (e.g., trenches and grid lines) can significantly reduce the spectral utilization due to the non-normal incident photon flux. Photons that enter the device through a trench edge are refracted onto a trajectory where they will not escape. This leads to a reduction in the number of reflected below bandgap photons that return to the radiator and reduce the spectral utilization. In addition, trenches expose a lateral conduction layer in this particular series of calculations which increase the absorption of above bandgap photons in inactive material.

Ballinger, C.T.; Charache, G.W. [Lockheed Martin Corp., Schenectady, NY (United States); Murray, C.S. [Bettis Atomic Power Lab., West Mifflin, PA (United States)

1998-10-01T23:59:59.000Z

351

Searching for optimal mitigation geometries for laser resistant multilayer high reflector coatings  

SciTech Connect

Growing laser damage sites on multilayer high reflector coatings can limit mirror performance. One of the strategies to improve laser damage resistance is to replace the growing damage sites with pre-designed benign mitigation structures. By mitigating the weakest site on the optic, the large aperture mirror will have a laser resistance comparable to the intrinsic value of the multilayer coating. To determine the optimal mitigation geometry, the finite difference time domain method (FDTD) was used to quantify the electric-field intensification within the multilayer, at the presence of different conical pits. We find that the field intensification induced by the mitigation pit is strongly dependent on the polarization and the angle of incidence (AOI) of the incoming wave. Therefore the optimal mitigation conical pit geometry is application specific. Furthermore, our simulation also illustrates an alternative means to achieve an optimal mitigation structure by matching the cone angle of the structure with the AOI of the incoming wave, except for the p-polarization wave at a range of incident angles between 30{sup o} and 45{sup o}.

Qiu, S R; Wolfe, J E; Monterrosa, A M; Feit, M D; Pistor, T V; STolz, C J

2011-02-11T23:59:59.000Z

352

Observed Minimum Illuminance Threshold for Night Market Vendors in Kenya who use LED Lamps  

Science Conference Proceedings (OSTI)

Creation of light for work, socializing, and general illumination is a fundamental application of technology around the world. For those who lack access to electricity, an emerging and diverse range of LED based lighting products hold promise for replacing and/or augmenting their current fuel-based lighting sources that are costly and dirty. Along with analysis of environmental factors, economic models for total cost-ofownership of LED lighting products are an important tool for studying the impacts of these products as they emerge in markets of developing countries. One important metric in those models is the minimum illuminance demanded by end-users for a given task before recharging the lamp or replacing batteries. It impacts the lighting service cost per unit time if charging is done with purchased electricity, batteries, or charging services. The concept is illustrated in figure 1: LED lighting products are generally brightest immediately after the battery is charged or replaced and the illuminance degrades as the battery is discharged. When a minimum threshold level of illuminance is reached, the operational time for the battery charge cycle is over. The cost to recharge depends on the method utilized; these include charging at a shop at a fixed price per charge, charging on personal grid connections, using solar chargers, and purchasing dry cell batteries. This Research Note reports on the observed"charge-triggering" illuminance level threshold for night market vendors who use LED lighting products to provide general and task oriented illumination. All the study participants charged with AC power, either at a fixed-price charge shop or with electricity at their home.

Johnstone, Peter; Jacobson, Arne; Mills, Evan; Radecsky, Kristen

2009-03-21T23:59:59.000Z

353

GLASS AND GLASS-DERIVATIVE SEALS FOR USE IN ENERGY-EFFICIENT FUEL CELLS AND LAMPS  

DOE Green Energy (OSTI)

As the project approaches the end of the first year, the materials screening components of the work are ahead of schedule, while all other tasks are on schedule. For solid oxide fuel cells (SOFC), a series of 16 sealing glasses have been prepared and characterized. Traditional melting was used to prepare all of the glasses, and the sol-gel approach has been used to prepare some of the glasses as well as other compositions that might be viable because of the low processing temperatures afforded by the sol-gel method. The glass characterization included measurements of the viscosity and thermal expansion of the glasses, as well as the thermal expansion of the partly crystalline glass ceramics. In addition, the wetting and sintering behavior of all glasses has been measured, as well as the crystallization behavior. The time and temperature at which crystalline phases form from the glasses has been determined for all of the glasses. Each glass ceramic contains at least two crystalline phases, and most of the crystalline phases have been positively identified. Room temperature leak testing has been completed for all sealants, and experiments are in progress to determine the DC electrochemical degradation and degradation in wet hydrogen. The second component of the work, focused on seals for higher-temperature discharge lighting, has focused on determining the phase relations in the yttria--alumina--silica system at various silica levels. Again, traditional melting and sol-gel synthesis have been employed, and the sol-gel method was successful for preparing new phases that were discovered during the work. High temperature diffraction and annealing studies have clarified the phase relations for the samples studies, although additional work remains. Four new phases have been identified and synthesized in pure form, from which full structure solutions were obtained as well as the anisotropic thermal expansion for each phase. Functional testing of lamps are on on-going and will be analyzed during year 2 of the contract.

Scott Misture; Arun Varshneya; Matthew Hall; Sylvia DeCarr; Steve Bancheri

2004-08-15T23:59:59.000Z

354

U.S. Department of Energy NEPA Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Notice of Proposed Rulemaking for Energy Conservation Standards for Certain Reflector, Elliptical Reflector, Notice of Proposed Rulemaking for Energy Conservation Standards for Certain Reflector, Elliptical Reflector, and Bulged Reflector Incandescent Reflector Lamps (RIN: 1904-AC15) Program or Field Office:EERE - Buildings Technology Program Location(s} (City/County/State): Nationwide Proposed Action Description: In this NQPR, DOE proposes to adopt new standards for the large diameter Incandescent Reflector Lamps (which will hereafter be referred to as certain "R, ER, and BR IRLs") include: (1) lamps rated 50 watts or less that are ER30, BR30, BR40, or ER40; (2) lamps rated 65 watts that are BR30, BR40, or ER40 lamps; and (3) R20 incandescent reflector lamps rated 45 watts or less. DOE also presents analysis for small diameter lamps and requests further comment on an appropriate standard for these products. The proposed standards, if adopted, would apply to all the

355

Glass and glass-derivative seals for use in energy-efficient fuel cells and lamps  

DOE Green Energy (OSTI)

For solid oxide fuel cells (SOFC), a series of 18 sealing glasses have been prepared and characterized. From the whole design space, several glasses were ''downselected'' and studied in detail to describe their behaviors in simulated fuel cell environments. One of the glasses was found to outperform all others, including the well-known G18 sealant developed at Pacific Northwest National Laboratory. The new glass composition showed lower bulk electrical conductivity, excellent sealing and wetting behavior when sealing under applied load, and qualitatively superior performance when exposed to wet hydrogen for 800 hours. Traditional melting was used to prepare all of the glasses that were studied in detail. The sol-gel approach was used to synthesize several compositions, but it was found that the glasses crystallized very rapidly during heating, precluding sealing. The glass characterization included measurements of the viscosity and thermal expansion of the glasses, as well as the thermal expansion of the partly crystalline glass ceramics. In addition, the wetting and sintering behavior of all glasses has been measured, as well as the crystallization behavior. The time and temperature at which crystalline phases form from the glasses has been determined for all of the glasses. Each glass ceramic contains at least two crystalline phases, and most of the crystalline phases have been positively identified. The body of fundamental data provides a platform for future developments for high temperature sealants, and the newly-developed glass compositions appear promising for large-scale testing. The second component of the work, focused on seals for higher-temperature discharge lighting, has focused on determining the phase relations in the yttria-alumina-silica system at various silica levels. Functional testing of one of the candidate sealants demonstrated that it performs well in current HID lighting applications. Further testing is required to evaluate its performance in next-generation lamps that operate at higher temperatures, but the baseline phase equilibria and crystallization behavior has been established for additional development. Again, traditional melting and sol-gel synthesis have been employed, and the sol-gel method was successful for preparing new phases that were discovered during the work. Four new phases have been identified and synthesized in pure form, from which full structure solutions were obtained as well as the anisotropic thermal expansion for each phase.

Scott Misture; Arun Varshineya; Matthew Hall; Sylvia DeCarr; Steve Bancheri

2005-07-28T23:59:59.000Z

356

Evaluating the Impact of the  

E-Print Network (OSTI)

simulated using linear fluorescent lamps with correlated color temperatures of 5000K. Yet, the variability among linear fluorescent lamp systems, which include the lamp, ballast and reflector, is great Linear Fluorescent Lamps Fluorescent lamps are produced in many different forms. Linear fluorescent lamps

Zanibbi, Richard

357

Project Assessment & Reporting System (PARS II) Release Notes: Version 8.0.20120308  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Project Assessment & Project Assessment & Reporting System (PARS II) Release Notes: Version 8.0.20120308 Release Date: 05/19/2012 Achieving Management and Operational Excellence Page 2 PARS II - Enhancements New and improved functionality was released in Version 8.0.20120308 of PARS II. This release offers PARS II Users a significant number of enhancements across all facets of the application. These enhancements include additional refinements to the "look and feel" of the system. Enhancements are a result of community/User recommendations. System usability as well as providing improved means for data collection, validation and reporting were strategically designed and tested over the past several months. An explanation of each enhancement ,

358

Microsoft Word - PARS II Process Document - Close Period 2013-04-29 _FINAL_  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PARS II APM DepSec Monthly Report & Close Period, V-2013-04-29 Page 1 PARS II APM DepSec Monthly Report & Close Period, V-2013-04-29 Page 1 PARS II Process Document APM DEPSEC MONTHLY REPORT & CLOSE PERIOD PURPOSE The purpose of this document is to describe the process of preparing the APM Deputy Secretary Monthly Report and closing the DOE Reporting Period in PARS II. SCOPE This process applies to the Headquarters Office of Acquisition and Project Management (HQ OAPM) and its support contractors as the organization that prepares the monthly reports and closes the monthly reporting period. The process covers data validation and verification; running, distributing and archiving of reports; and

359

PARS II Phased Project Reporting Process, V-2013-03-14 Page 1  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Phased Project Reporting Process, V-2013-03-14 Page 1 PARS II Process Document PROJECT PHASING (MULTIPLE CD-2 FROM SINGLE CD-1) PURPOSE The purpose of this document is to describe...

360

Filtrage anisotrope robuste et segmentation par B-spline snake : application aux images échographiques.  

E-Print Network (OSTI)

??Le contexte de ce travail est le traitement d'images échographiques. Plus précisément, on s'est intéressé au filtrage et à la segmentation automatique d'images dégradées par… (more)

Tauber, Clovis

2005-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "reflector par lamps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

PARS II Process Document SUBMITTING AND PROCESSING EMAIL AS OFFICIAL PROJECT ACTION  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PARS II Process Document PARS II Process Document SUBMITTING AND PROCESSING EMAIL AS OFFICIAL PROJECT ACTION APPROVAL DOCUMENTATION PURPOSE The purpose of this document is to describe the process and documentation requirements for submitting and processing approvals of project actions (i.e. On Hold Memo, Critical Decision Approval Memo, FPD Designation Memo, etc.) in PARS II via electronic signature. SCOPE This process applies to all Acquisition Executives and other approving officials wishing to substitute ink-and- paper approval of project action with electronic notification of the approval action through electronic mail (email) message. PROCESS DESCRIPTION AND REQUIREMENTS In an effort to streamline the project action approval process and minimize the time lag in updating PARS II,

362

Solar passive ceiling system. Final report. [Passive solar heating system with venetian blind reflectors and latent heat storage in ceiling  

DOE Green Energy (OSTI)

The construction of a 1200 square foot building, with full basement, built to be used as a branch library in a rural area is described. The primary heating source is a passive solar system consisting of a south facing window system. The system consists of: a set of windows located in the south facing wall only, composed of double glazed units; a set of reflectors mounted in each window which reflects sunlight up to the ceiling (the reflectors are similar to venetian blinds); a storage area in the ceiling which absorbs the heat from the reflected sunlight and stores it in foil salt pouches laid in the ceiling; and an automated curtain which automatically covers and uncovers the south facing window system. The system is totally passive and uses no blowers, pumps or other active types of heat distribution equipment. The building contains a basement which is normally not heated, and the north facing wall is bermed four feet high around the north side.

Schneider, A.R.

1980-01-01T23:59:59.000Z

363

Microsoft Word - PARS II User Acct Access Guide.rtf  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

O O f f f f i i c c e e o o f f t t h h e e E E n n g g i i n n e e e e r r i i n n g g a a n n d d C C o o n n s s t t r r u u c c t t i i o o n n M M a a n n a a g g e e m m e e n n t t U U s s e e r r A A c c c c o o u u n n t t A A c c c c e e s s s s G G u u i i d d e e f f o o r r P P A A R R S S I I I I Version 1.1 May 10, 2010 Submitted by: Energy Enterprise Solutions 20440 Century Blvd. Suite 150 Germantown, MD 20874 Phone 301-916-0050 Fax 301-916-0066 www.eesllc.net 2 Title Page Document Name: User Account Access Guide for PARS II Publication Date: May 10, 2010 Contract Number: DE-AT01-06IM00102 Project Number: 1ME07 CLIN 2 Prepared by: Kai Mong, EES Norm Ayers, EES Reviewed by: Ken Henderson, EES Josephine Peck, EES Approval: _________________________________ John Makepeace, DOE OECM MA-50

364

Sur le parcours des rayons 03B1 de l'uranium Par Lon BLOCH,  

E-Print Network (OSTI)

Sur le parcours des rayons 03B1 de l'uranium Par Léon BLOCH, Agrégé de l'Université de Paris parcours des rayons x de l'uranium a été dé- terminé par Bragg1 au moyen d'une méthode indirecte. Bragg a mesuré l'ionisatiol totale due au rayonnement de l'uranium lorsque la substance est recouverte d

Paris-Sud XI, Université de

365

Highly Enriched Uranium Metal Annuli and Cylinders with Polyethylene Reflectors and/or Internal Polyethylene Moderator  

SciTech Connect

A variety of critical experiments were constructed of enriched uranium metal during the 1960s and 1970s at the Oak Ridge Critical Experiments Facility in support of criticality safety operations at the Y-12 Plant. The purposes of these experiments included the evaluation of storage, casting, and handling limits for the Y-12 Plant and providing data for verification of calculation methods and cross-sections for nuclear criticality safety applications. These included solid cylinders of various diameters, annuli of various inner and outer diameters, two and three interacting cylinders of various diameters, and graphite and polyethylene reflected cylinders and annuli. Of the hundreds of delayed critical experiments, experiments of uranium metal annuli with and without polyethylene reflectors and with the central void region either empty or filled with polyethylene were evaluated under ICSBEP Identifier HEU-MET-FAST-076. The outer diameter of the uranium annuli varied from 9 to 15 inches in two-inch increments. In addition, there were uranium metal cylinders with diameters varying from 7 to 15 inches with complete reflection and reflection on one flat surface to simulate floor reflection. Most of the experiments were performed between February 1964 and April 1964. Five partially reflected (reflected on the top only) experiments were assembled in November 1967, but are judged by the evaluators not to be of benchmark quality. Twenty-four of the twenty-five experiments have been determined to have fast spectra. The only exception has a mixed spectrum. Analyses were performed in which uncertainty associated with five different parameters associated with the uranium parts and three associated with the polyethylene parts was evaluated. Included were uranium mass, height, diameter, isotopic content, and impurity content and polyethylene mass, diameter, and impurity content. There were additional uncertainties associated with assembly alignment, support structure, and the value for ßeff. In addition to the idealizations made by the experimenters (removal of a diaphragm), a few simplifications were also made to the benchmark models that resulted in a small bias and additional uncertainty. Simplifications included omission of the support structure, possible surrounding equipment, and the walls, floor, and ceiling of the experimental cell. Bias values that result from these simplifications were determined and associated uncertainty in the bias values were included in the overall uncertainty in benchmark keff values. Bias values ranged from 0.0002 ?k to 0.0093 ?k below the experimental value. Overall uncertainties range from ? 0.0002 to ? 0.0011. Major contributors to the overall uncertainty include uncertainty in the support structure and the polyethylene parts. A comparison of experimental, benchmark-model, and MCNP-model keff values is shown in Figure 1. The experimental keff values are derived from the original reactivities reported by the principal experimentalist. The benchmark-model keff values are the experimental keff values adjusted to account for biases that were introduced by removing the support structure and surroundings. The MCNP-model keff values are simply the values found from MCNP calculations using the benchmark specifications and ENDF/B-VI cross-section data. Figure 1. Comparison of Experimental, Benchmark-Model and MCNP-Model keff value. Calculated results for most of the experiments are

Tyler Sumner; J. Blair Briggs; Leland Montierth

2007-05-01T23:59:59.000Z

366

Process for environmentally safe disposal of used fluorescent lamp potted ballast assemblies with component part reclamation and/or recycling  

SciTech Connect

A process is described for the environmentally safe and economical disposal of used fluorescent lamp potted ballast housing assemblies comprising removing from the housing the potted assembly with its embedded electrical component assemblies including a component capacitor containing environmentally hazardous material PCB's; after or before such removing, immersing the potted assembly in a cryogenic bath and freezing the same to reader the potting sufficiently brittle to fragment into small pieces upon being impacted; impacting the potting thoroughly to crush and fragment the same into small pieces and to cleanly remove substantially all traces of the potting from all the electrical components and parts embedded therein and without imparting damage to the components and parts; disconnecting the component containing the environmentally hazardous material; and incinerating only the component containing the environmentally hazardous material, leaving all other components and parts including the housing and potting fragments for salvage, re-use and/or recycling.

Nardella, A.; Norian, B.

1993-07-27T23:59:59.000Z

367

Exploration of illumination concepts for underground coal mines. Appendix E. Electronic ballast for the Lucalox high pressure sodium lamp. Final report  

SciTech Connect

The report documents the results of an investigation to develop solid-state ballasts for Lucalox high-pressure sodium lamps. The ballasts were to be used in the modified and new portable and machine-mounted lighting systems designed by the Crouse-Hinds Co., per tasks I through IV of Contract No. H022065.

1976-07-20T23:59:59.000Z

368

Midtemperature Solar Systems Test Facility predictions for thermal performance based on test data: Custom Engineering trough with glass reflector surface and Sandia-designed receivers  

DOE Green Energy (OSTI)

Thermal performance predictions based on test data are presented for the Custom Engineering trough and Sandia-designed receivers, with glass reflector surface, for three output temperatures at five cities in the United States. Two experimental receivers were tested, one with an antireflective coating on the glass envelope around the receiver tube and one without the antireflective coating.

Harrison, T.D.

1981-05-01T23:59:59.000Z

369

Handbook of solar energy data for south-facing surfaces in the United States. Volume I. An insolation, array shadowing, and reflector augmentation model  

DOE Green Energy (OSTI)

This handbook provides estimates of average available solar insolation to fixed, flat-plate, south-facing collector surfaces at various array tilt angles at numerous sites in the US. This first volume contains average daily, total insolation estimates, by month, and annual totals for 235 locations. A model that estimates the direct, diffuse, and reflected components of total insolation on an hourly, daily, and monthly basis is presented. A shadow loss model and a reflector augmentation model providing estimates of the losses and gains associated with various fixed array geometries are also described. These models can be used with the insolation model provided or with other recorded data. A FORTRAN computer program with user's guide is presented. The program can be used to generate additional handbook values or to examine the effects of array shadowing and fixed reflector augmentation effects on a daily, monthly, or annual basis. Array shadowing depends on location, array size, array tilt, array separation, and time. The program can be used to examine trade-offs between array spacing and insolation losses due to shadowing. The reflector augmentation program can be used to examine trade-offs among array size and tilt, separation, and reflector tilt to determine the combination of design values that optimize the economic objectives or technical criteria of the system.

Smith, J.H.

1980-01-15T23:59:59.000Z

370

STARTUP REACTIVITY ACCOUNTABILITY ATTRIBUTED TO ISOTOPIC TRANSMUTATIONS IN THE IRRADIATED BERYLLIUM REFLECTOR OF THE HIGH FLUX ISTOTOPE REACTOR  

Science Conference Proceedings (OSTI)

The objective of this study is to develop a methodology to predict the reactivity impact as a function of outage time between cycles of 3He, 6Li, and other poisons in the High Flux Isotope Reactor s (HFIR) beryllium reflector. The reactivity worth at startup of the HFIR has been incorrectly predicted in the past after the reactor has been shut-down for long periods of time. The incorrect prediction was postulated to be due to the erroneous calculation of 3He buildup in the beryllium reflector. It is necessary to develop a better estimate of the start-of-cycle symmetric critical control element positions since if the estimated and actual symmetrical critical control element positions differ by more than $1.55 in reactivity (approximately one-half inch in control element startup position), HFIR is to be shutdown and a technical evaluation is performed to resolve the discrepancy prior to restart. 3He is generated and depleted during operation, but during an outage, the depletion of 3He ceases because it is a stable isotope. 3He is born from the radioactive decay of tritium, and thus the concentration of 3He increases during shutdown. The computer program SCALE, specifically the TRITON and CSAS5 control modules including the KENO V.A, COUPLE, and ORIGEN functional modules were utilized in this study. An equation relating the down time (td) to the change in symmetric control element position was generated and validated against measurements for approximately 40 HFIR operating cycles. The newly-derived correlation was shown to improve accuracy of predictions for long periods of down time.

Chandler, David [ORNL; Maldonado, G Ivan [ORNL; Primm, Trent [ORNL

2010-01-01T23:59:59.000Z

371

PARS II Phased Project Reporting Process, V-2013-03-14 Page 1  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Phased Project Reporting Process, V-2013-03-14 Page 1 Phased Project Reporting Process, V-2013-03-14 Page 1 PARS II Process Document PROJECT PHASING (MULTIPLE CD-2 FROM SINGLE CD-1) PURPOSE The purpose of this document is to describe the process of entering, managing, and reporting projects in PARS II that adopted Phasing approach. SCOPE This process applies to projects that are managed as a larger program through CD1 but are executed in phases with parts of the projects reaching CD2 approvals earlier than the main project. PROCESS The main goal of the process is to ensure that as new projects are created for various phases of the original CD1 program, DOE portfolio is not overstated in portfolio reports and to ensure that linking is retained in PARS II between original CD1 program and resulting CD2 project phases.

372

Replacing Incandescent Lightbulbs and Ballasts | Department of...  

NLE Websites -- All DOE Office Websites (Extended Search)

as ellipsoidal reflectors (type-ER) in recessed fixtures. Use reflector (R)or parabolic reflector (PAR) CFLs for flood and spotlighting. Some CFL fixtures have built-in...

373

Universite Paris XI UFR scientifique d'Orsay N d'ordre : IPNO-T-09-10 presentee par  

E-Print Network (OSTI)

fonction de la temp´erature . . . 10 1.3.3 M´ethode de couplage par une m´ethode multi-groupes . . . . . . . 41 3 COUPLAGE DES CODES 43 3.1 MURE comme logiciel de temp´erature des sections efficaces par une m´ethode d

Paris-Sud XI, Université de

374

Atomic gas temperature in a nonequilibrium high-intensity discharge lamp determined from the red wing of the resonance mercury line 254 nm  

Science Conference Proceedings (OSTI)

For developing low-wattage high intensity discharge (HID) lamps, a better understanding of the relatively unexplored nonequilibrium phenomena is essential. This needs interpretation of diagnostic results by methods free from equilibrium assumptions. In this paper, the atomic temperature is determined from the simulation of a quasistatic broadened resonance line by distinguishing between atomic temperature and excitation temperature in the equation of radiative transfer. The proposed method is applied to the red wing of the resonance mercury line 254 nm emitted from a HID lamp working on ac. The experimental results show severe deviation from local thermodynamic equilibrium. More than one thousand degrees difference was obtained between atomic and electron temperatures at the maximum current phase.

Drakakis, E. [Technological Educational Institute, Department of Electrical Engineering, 71004 Heraklion (Greece); Karabourniotis, D. [Institute of Plasma Physics, Department of Physics, University of Crete, 71003 Heraklion (Greece)

2012-09-01T23:59:59.000Z

375

Synthse vocale par slection linguistiquement oriente d'units non-uniformes : LiONS  

E-Print Network (OSTI)

Synthèse vocale par sélection linguistiquement orientée d'unités non-uniformes : LiONS Vincent point emploient, en proportions variables, des caractéristiques linguistiques, acoustiques et symbo- liques. Les caractéristiques linguistiques sont directement issues de l'analyse de la langue, tandis que

Dupont, Stéphane

376

Mise en correspondance par correlation avec prise en compte des occultations  

E-Print Network (OSTI)

Mise en correspondance par corr´elation avec prise en compte des occultations Occlusions handling cours de l'appariement, provient des occultations. C'est pourquoi le second objectif est de pr compte le probl`eme des occultations. Les r´esultats mettent en ´evidence la meilleure m´ethode qui

Chambon, Sylvie

377

Article de synthse L'amplification des squences de nuclotides par PCR  

E-Print Network (OSTI)

Article de synthèse L'amplification des séquences de nucléotides par PCR et les nouvelles'Ã?tude de la Fertilité; Paris, 19-21 octobre 1989) Résumé ― La PCR (polymerase chain reaction) est en plus grande dans les approches diagnostiques. PCR amplification / ADN / ARN / diagnostic

Recanati, Catherine

378

Midtemperature Solar Systems Test Facility predictions for thermal performance based on test data. Alpha Solarco Model 104 solar collector with 0. 125-inch Schott low-iron glass reflector surface  

DOE Green Energy (OSTI)

Thermal performance predictions based on test data are presented for the Alpha Solarco Model 104 solar collector, with 0.125-inch Schott low-iron glass reflector surface, for three output temperatures at five cities in the United States.

Harrison, T.D.

1981-04-01T23:59:59.000Z

379

DOE/EA-1664: Environmental Assessment for 10 CFR 430 Energy Conservation Standards: Energy Conservation Standards for Fluorescent and Incandescent Lamps (June 2009)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4 4 Environmental Assessment for 10 CFR Part 430 Energy Conservation Standards: Energy Conservation Standards for Fluorescent and Incandescent Lamps June 2009 16-i CHAPTER 16. ENVIRONMENTAL ASSESSMENT TABLE OF CONTENTS 16.1 INTRODUCTION ......................................................................................................... 16-1 16.2 AIR EMISSIONS ANALYSIS...................................................................................... 16-1 16.2.1 Air Emissions Descriptions............................................................................................ 16-1 16.2.2 Air Quality Regulation................................................................................................... 16-3 16.2.3 Global Climate Change..................................................................................................

380

Assessment of Electrical, Efficiency, and Photometric Performance of Advanced Lighting Sources: Dimmable Advanced Lighting Technolog ies -- Electronic (Hot and Cold Cathode) Compact Fluorescent Lamps and Ballasts  

Science Conference Proceedings (OSTI)

This EPRI Technical Update (EPRI report 1018477) is one of four in a series that addresses basic dimming performance of advanced lighting sourceselectronic (hot and cold cathode) compact fluorescent lamps and ballasts Chapter 1 discusses basic lighting control, the importance of considering power quality in lighting control, lighting control methods and parameters, and the advantages and future of lighting control. Chapter 2 addresses in more depth dimming methods used in advanced lighting sources and co...

2008-12-19T23:59:59.000Z

Note: This page contains sample records for the topic "reflector par lamps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Project Plan 7930 Cell G PaR Remote Handling System Replacement  

Science Conference Proceedings (OSTI)

For over 40 years the US Department of Energy (DOE) and its predecessors have made Californium-252 ({sup 252}Cf) available for a wide range of industries including medical, nuclear fuels, mining, military and national security. The Radiochemical Engineering Development Center (REDC) located within the Oak Ridge National Laboratory (ORNL) processes irradiated production targets from the High Flux Isotope Reactor (HFIR). Operations in Building 7930, Cell G provide over 70% of the world's demand for {sup 252}Cf. Building 7930 was constructed and equipped in the mid-1960s. Current operations for {sup 252}Cf processing in Building 7930, Cell G require use of through-the-wall manipulators and the PaR Remote Handling System. Maintenance and repairs for the manipulators is readily accomplished by removal of the manipulator and relocation to a repair shop where hands-on work can be performed in glove boxes. Contamination inside cell G does not currently allow manned entry and no provisions were created for a maintenance area inside the cell. There has been no maintenance of the PaR system or upgrades, leaving operations vulnerable should the system have a catastrophic failure. The Cell G PaR system is currently being operated in a run to failure mode. As the manipulator is now 40+ years old there is significant risk in this method of operation. In 2006 an assessment was completed that resulted in recommendations for replacing the manipulator operator control and power centers which are used to control and power the PaR manipulator in Cell G. In mid-2008 the chain for the bridge drive failed and subsequent examinations indicated several damaged links (see Figure 1). To continue operations the PaR manipulator arm is being used to push and pull the bridge as a workaround. A retrieval tool was fabricated, tested and staged inside Cell G that will allow positioning of the bridge and manipulator arm for removal from the cell should the PaR system completely fail. A fully functioning and reliable Par manipulator arm is necessary for uninterrupted {sup 252}Cf operations; a fully-functioning bridge is needed for the system to function as intended.

Kinney, Kathryn A [ORNL

2009-10-01T23:59:59.000Z

382

Fiber optic sensor employing successively destroyed coupled points or reflectors for detecting shock wave speed and damage location  

DOE Patents (OSTI)

A shock velocity and damage location sensor providing a means of measuring shock speed and damage location. The sensor consists of a long series of time-of-arrival "points" constructed with fiber optics. The fiber optic sensor apparatus measures shock velocity as the fiber sensor is progressively crushed as a shock wave proceeds in a direction along the fiber. The light received by a receiving means changes as time-of-arrival points are destroyed as the sensor is disturbed by the shock. The sensor may comprise a transmitting fiber bent into a series of loops and fused to a receiving fiber at various places, time-of-arrival points, along the receiving fibers length. At the "points" of contact, where a portion of the light leaves the transmitting fiber and enters the receiving fiber, the loops would be required to allow the light to travel backwards through the receiving fiber toward a receiving means. The sensor may also comprise a single optical fiber wherein the time-of-arrival points are comprised of reflection planes distributed along the fibers length. In this configuration, as the shock front proceeds along the fiber it destroys one reflector after another. The output received by a receiving means from this sensor may be a series of downward steps produced as the shock wave destroys one time-of-arrival point after another, or a nonsequential pattern of steps in the event time-of-arrival points are destroyed at any point along the sensor.

Weiss, Jonathan D. (Albuquerque, NM)

1995-01-01T23:59:59.000Z

383

Fiber optic sensor employing successively destroyed coupled points or reflectors for detecting shock wave speed and damage location  

DOE Patents (OSTI)

A shock velocity and damage location sensor providing a means of measuring shock speed and damage location is disclosed. The sensor consists of a long series of time-of-arrival ``points`` constructed with fiber optics. The fiber optic sensor apparatus measures shock velocity as the fiber sensor is progressively crushed as a shock wave proceeds in a direction along the fiber. The light received by a receiving means changes as time-of-arrival points are destroyed as the sensor is disturbed by the shock. The sensor may comprise a transmitting fiber bent into a series of loops and fused to a receiving fiber at various places, time-of-arrival points, along the receiving fibers length. At the ``points`` of contact, where a portion of the light leaves the transmitting fiber and enters the receiving fiber, the loops would be required to allow the light to travel backwards through the receiving fiber toward a receiving means. The sensor may also comprise a single optical fiber wherein the time-of-arrival points are comprised of reflection planes distributed along the fibers length. In this configuration, as the shock front proceeds along the fiber it destroys one reflector after another. The output received by a receiving means from this sensor may be a series of downward steps produced as the shock wave destroys one time-of-arrival point after another, or a nonsequential pattern of steps in the event time-of-arrival points are destroyed at any point along the sensor. 6 figs.

Weiss, J.D.

1995-08-29T23:59:59.000Z

384

CX-007850: Categorical Exclusion Determination | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

850: Categorical Exclusion Determination 850: Categorical Exclusion Determination CX-007850: Categorical Exclusion Determination Notice of Proposed Rulemaking for Energy Conservation Standards for Certain Reflector, Elliptical Reflector, and Bulged Reflector Incandescent Reflector Lamps CX(s) Applied: B5.1 Date: 01/09/2012 Location(s): Nationwide Offices(s): Energy Efficiency and Renewable Energy In this Notice of Proposed Rulemaking (NOPR), DOE proposes to adopt new standards for the large diameter Incandescent Reflector Lamps (which will hereafter be referred to as certain "R, ER, and BR IRLs") include: (1) lamps rated 50 watts or less that are ER30, BR30, BR40, or ER40; (2) lamps rated 65 watts that are BR30, BR40, or ER40 lamps; and (3) R20 incandescent reflector lamps rated 45 watts or less. DOE also presents analysis for

385

u.s. Dl!PAR1'M:ENT OF ENERGY EERE PROJECT MANAGEMENT CENTER  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PAR1'M:ENT OF ENERGY PAR1'M:ENT OF ENERGY EERE PROJECT MANAGEMENT CENTER NEPA DETERlIIINATION RECIPIENT :University of California San Diego PROJECT TITL.E: San Diego Center for Algae Biotechnology Page 1 of2 STATE: CA Funding Opportunity Announcement Number Procurement Instnlment Number NEPA Control Number em Number EEOOO3142 GF0-10-582 EE3142 Based on my review ortbe information concerning the proposed action, as NEPA Compliance Officer (authorukd under DOE Order 451.1A), I have made the following determination: ex, EA, EIS APPENDIX AND NUMBER: Description: 83.6 Siting . construction (or modification), operation, and deoommissioning of facilities for indoor bench-scale research projects and conventional laboratory operations (for example. preparation of chemical standards and sample analYSIS):

386

Microsoft Word - PARS II Letter of Introduction 20091119d.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Enterprise Solutions, LLC Energy Enterprise Solutions, LLC 20440 Century Blvd. Suite 150 Germantown, Maryland 20874 Phone: 301-916-0050 Fax: 301-916-0066 www.eesllc.net November 19, 2009 Contractor Person Name Contractor Company Address 1 Address 2 City, State, Zip Dear [Mr./Mrs.] ________, Energy Enterprise Solutions (EES), under contract to the Department of Energy's (DOE) Office of Engineering and Construction Management (OECM), is preparing to deploy the next generation of the Project Assessment and Reporting System (PARS). This new system, called PARS II, will be used by Federal Project Directors, Program Office staff, and OECM analyst personnel to enter status assessments, forecasts and other data. It will automate the upload of contractor earned value and schedule data, and will provide the federal staff with a common view

387

Phosphors for LED lamps  

DOE Patents (OSTI)

A phosphor, a phosphor blend including the phosphor, a phosphor prepared by a process, and a lighting apparatus including the phosphor blend are disclosed. The phosphor has the formula (Ca.sub.1-p-qCe.sub.pK.sub.q).sub.xSc.sub.y(Si.sub.1-rGa.sub.r).sub.zO.su- b.12+.delta. or derived from a process followed using disclosed amounts of reactants. In the formula, (0

Murphy, James Edward; Manepalli, Satya Kishore; Kumar, Prasanth Nammalwar

2013-08-13T23:59:59.000Z

388

Le produit et le rayonnement de l'uranium X1 Par F. SODDY  

E-Print Network (OSTI)

53 Le produit et le rayonnement de l'uranium X1 Par F. SODDY [Laboratoire de chimie-physique de l probablement deux pro- duits à rayons '1., intermédiaires entre l'uranium X et te radium. Boltwood a montre différence de 12 unités entre le poids atomique de l'uranium et celui dut radium. Cette différence correspond

Paris-Sud XI, Université de

389

EFFETS DES FAIBLES IRRADIATIONS SUR L'URANIUM Par Y. QUR,  

E-Print Network (OSTI)

489. EFFETS DES FAIBLES IRRADIATIONS SUR L'URANIUM Par Y. QU�R�, Centre d'�tudes Nucléaires de fragments de fission dans l'uranium, on présente quelques résultats de mesure de longueur et de résistivité modifiés. Abstract. 2014 After recalling Brinkman's model for the action of fission fragments on uranium

Paris-Sud XI, Université de

390

Sur la radioactivit des solutions de sels d'uranium Par L. MICHIELS  

E-Print Network (OSTI)

432 Sur la radioactivité des solutions de sels d'uranium Par L. MICHIELS [Laboratoire de'une substanceradioactive ne produisant pas d'émanation, telle que l'uranium. D'une première série d'expériences effectuées au moyen de solutions de sulfate uranico-potassique K(UO)SO4+H2O dont la teneur, exprimée en uranium

Paris-Sud XI, Université de

391

Seismic analysis of the Par Pond Dam: Study of slope failure and liquefaction. Technical evaluation report  

SciTech Connect

Stability concerns of the Par Pond Dam, an embankment structure in the Savannah River Site complex, resulted in a comprehensive evaluation of the state of its integrity. Specifically, excessive seepage through the embankment, slope failure due to an earthquake event as well as liquefaction potential of the embankment and the foundation are addressed and the potential of failure is evaluated. Lastly, remedial benefits of the addition of a berm structure are also assessed.

Simos, N.; Reich, M.

1994-07-01T23:59:59.000Z

392

REDUCTION DE L'OCTOOXYDE D'URANIUM EN DIOXYDE D'URANIUM PAR L'AMMONIAC  

E-Print Network (OSTI)

REDUCTION DE L'OCTOOXYDE D'URANIUM EN DIOXYDE D'URANIUM PAR L'AMMONIAC P. Suhubiette1 , F mines, 158 Cours Fauriel, 42023 Saint Etienne Cedex2, France Résumé. Ce travail présente l'étude cinétique de la réduction de l'octooxyde d'uranium par l'ammoniac en dioxyde d'uranium. Cette réduction

393

South America PAR SR Solar Model from INPE and LABSOLAR | OpenEI  

Open Energy Info (EERE)

PAR SR Solar Model from INPE and LABSOLAR PAR SR Solar Model from INPE and LABSOLAR Dataset Summary Description (Abstract): Mean values of PAR Solar Radiation in kWh/m2/day for 40km cells for 1 year (month, season, year) based on data from 1995 to 2005 (Purpose): To provide a set of consistent, reliable, verifiable, and accessible global data sets for international and in-country investors and other stakeholders (Supplemental Information): The BRASIL-SR model (developed by INPE - National Institute for Space Research) and the ARCVIEW software were used to produce the dataset and SHAPE files. The assessment of reliability levels of the BRASIL-SR model were performed through the evaluation of the deviations shown by the estimated values for solar radiation flux vis-à-vis the values measured at the surface (ground truth). This evaluation was done in two phases. The first phase consisted in an inter-comparison between the core radiation transfer models adopted by the SWERA Project to map the solar energy n the various countries participating in the project. The HELIOSAT model took part in this phase like benchmark due to its employment to apply solar energy resources in countries from European Union. In the second phase, the solar flux estimates provided by the BRASIL-SR model were compared with measured values acquired at several solarimetric stations spread along the Brazilian territory. The BRASIL-SR model is not validated for areas covered by snow.

394

K-Area and Par Pond Sewage Sludge Application Sites groundwater monitoring report: Second quarter 1993  

Science Conference Proceedings (OSTI)

During second quarter 1993, samples from the three monitoring wells at the K-Area site (KSS series) and the three monitoring wells at the Par Pond site (PSS series) were analyzed for constituents required by South Carolina Department of Health and Environmental Control Construction Permit 13,173 and for other constituents as part of the Savannah River Site (SRS) Groundwater Monitoring Program. This report describes monitoring results that exceeded the final Primary Drinking Water Standards (PDWS) or the SRS flagging criteria. During second quarter 1993, no constituents exceeded the final PDWS or any other flagging criteria at the K-Area and Par Pond Sewage Sludge Application Sites. During first quarter 1993, aluminum and iron exceeded the SRS Flag 2 criteria in one or more of the KSS and the PSS wells. These constituents were not analyzed second quarter 1993. In the KSS well series, the field measurement for alkalinity ranged as high as 35 mg/L in well KSS 1D. Alkalinity measurements were zero in the PSS wells, except for a single measurement of 1 mg/L in well PSS 1D. Historical and current water-level elevations at the K-Area Sewage Sludge Application Site indicate that the groundwater flow direction is south to southwest (SRS grid coordinates). The groundwater flow direction at the Par Pond Sewage Sludge Application Site could not be determined second quarter 1993.

Not Available

1993-10-01T23:59:59.000Z

395

Fixed tilt solar collector employing reversible vee-trough reflectors and evacuated tube receivers for solar heating and cooling systems. Final report, Phase II data acquisition  

DOE Green Energy (OSTI)

The objective of the Vee-Trough/Evacuated Tube Collector (VTETC) Project, undertaken for the DOE Solar Heating and Cooling Branch, was to show how vee-trough concentrators could improve the heat collection capability and reduce the cost of collectors consisting of evacuated tube receivers. The work was carried out in two phases. During the first phase, the VTETC was analyzed rigorously and various mathematical models were developed to calculate the optical performance of the vee-trough concentrators and the thermal performance of the evacuated tube receivers. A test bed was constructed to verify the mathematical analyses and compare reflectors made of back-silvered glass mirror, Alzak, Aluminized Teflon, and Kinglux (an electro polished aluminum reflector). Testing was conducted and data was obtained for the months of April to August 1977. The results of the mathematical analyses, as well as the results from 1977, were reported in DOE/JPL/1024-1, published in January 1978. In the second phase, additional tests were run at temperatures ranging from 80 to 190/sup 0/C (176 to 374/sup 0/F) during the months of April, May, June, and July 1978. The results obtained compared well with theoretical predictions. For the glass mirror reflectors, peak efficiencies, based on aperture area and operating temperatures of 125/sup 0/C (257/sup 0/F), were over 40%. Efficiencies of about 40% were observed at temperatures of 150/sup 0/C (302/sup 0/F) and 30% at 175/sup 0/C (347/sup 0/F). Test data covering a complete day are presented for selected dates throughout the test season. Predicted daily useful heats collected and efficiency values are presented for a full year. These theoretical values are then compared with actual data points for the same temperature range.

Selcuk, M.K.

1978-10-15T23:59:59.000Z

396

Orthogonal parabolic reflector systems  

SciTech Connect

A structure is described comprising: a reflecting surface which has an axis and is open at least at one axial end and in an axial section generally conforms to an axial section through a surface generated by rotating a portion of a parabolic curve about an axis perpendicular to the axis of the parabola defined by the curve; and an elongated source/sink which extends at least in the direction of the axis of the reflecting surface and is at least partly enveloped by the reflecting surface.

Cheng, D.Y.

1993-08-10T23:59:59.000Z

397

Appliances and Commercial Equipment Standards  

NLE Websites -- All DOE Office Websites (Extended Search)

General Service Fluorescent and Incandescent Reflector Lamps Energy Conservation Standard Sign up for e-mail updates on regulations for this and other products The Department of...

398

Fourteenth Semi-Annual Report to Congress on Appliance Energy...  

NLE Websites -- All DOE Office Websites (Extended Search)

Engineering Society of North America IRL - Incandescent Reflector Lamp LED - Light-Emitting Diode MEF- Modified Energy Factor MV - Medium Voltage NEMA - National Electrical...

399

2010 Report to Congresss -- Implementation Report: Energy Conservation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Society of North America (or IESNA) IRL - Incandescent Reflector Lamp LED - Light-Emitting Diode NIA - National Impact Analysis NODA - Notice of Data Availability NOPD - Notice...

400

2010 Aug Report to Congress  

NLE Websites -- All DOE Office Websites (Extended Search)

Electrotechnical Commission IRL - Incandescent Reflector Lamp LED - Light-Emitting Diode NODA - Notice of Data Availability NOPD - Notice of Proposed Determination NOPM...

Note: This page contains sample records for the topic "reflector par lamps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Par Pond phytoplankton in association with refilling of the pond: Final Report for sampling from February 1995 -- September 1996  

Science Conference Proceedings (OSTI)

This report describes the results of phytoplankton analyses from Par Pond samples collected between February 1995 and September 1996. The principal objective of the study was to determine the effect of refilling of Par Pond following repair of the dam on the phytoplankton community. Algal blooms are often responsible for fish kills and other detrimental effects in ponds and lakes, and it was postulated that decaying vegetation from formerly exposed sediments might trigger algal blooms that could result in fish kills in Par Pond following the refill. Sporadic algal blooms involving blue-green algae were detected, especially during the summer of 1996. However, the data derived from the study demonstrates that overall, the refilling effort caused no significant negative impact to the pond attributable to phytoplankton dynamics.

Wilde, E.W.; Johnson, M.A.; Cody, W.C.

1996-12-31T23:59:59.000Z

402

Decontamination Strategy for Large Area and/or Equipment Contaminated with Chemical and Biological Agents using a High Energy Arc Lamp (HEAL)  

Science Conference Proceedings (OSTI)

A strategy for the decontamination of large areas and or equipment contaminated with Biological Warfare Agents (BWAs) and Chemical Warfare Agents (CWAs) was demonstrated using a High Energy Arc Lamp (HEAL) photolysis system. This strategy offers an alternative that is potentially quicker, less hazardous, generates far less waste, and is easier to deploy than those currently fielded by the Department of Defense (DoD). For example, for large frame aircraft the United States Air Force still relies on the combination of weathering (stand alone in environment), air washing (fly aircraft) and finally washing the aircraft with Hot Soapy Water (HSW) in an attempt to remove any remaining contamination. This method is laborious, time consuming (upwards of 12+ hours not including decontamination site preparation), and requires large amounts of water (e.g., 1,600+ gallons for a single large frame aircraft), and generates large amounts of hazardous waste requiring disposal. The efficacy of the HEAL system was demonstrated using diisopropyl methyl phosphonate (DIMP) a G series CWA simulant, and Bacillus globigii (BG) a simulant of Bacillus anthracis. Experiments were designed to simulate the energy flux of a field deployable lamp system that could stand-off 17 meters from a 12m2 target area and uniformly expose a surface at 1360 W/m2. The HEAL system in the absence of a catalyst reduced the amount of B. globigii by five orders of magnitude at a starting concentration of 1.63 x 107 spores. In the case of CWA simulants, the HEAL system in the presence of the catalyst TiO2 effectively degraded DIMP sprayed onto a 100mm diameter Petri dish in 5 minutes.

Schoske, Richard [ORNL; Kennedy, Patrick [ORNL; Duty, Chad E [ORNL; Smith, Rob R [ORNL; Huxford, Theodore J [ORNL; Bonavita, Angelo M [ORNL; Engleman, Greg [ORNL; Vass, Arpad Alexander [ORNL; Griest, Wayne H [ORNL; Ilgner, Ralph H [ORNL; Brown, Gilbert M [ORNL

2009-04-01T23:59:59.000Z

403

EA-1664: Final Environmental Assessment | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

64: Final Environmental Assessment 64: Final Environmental Assessment EA-1664: Final Environmental Assessment 10 CFR Part 430 Energy Conservation Standards: Energy Conservation Standards for Fluorescent and Incandescent Lamps The U.S. Department of Energy has determined that the adoption of energy conservation standards for General Service Fluorescent Lamps and Incandescent Reflector Lamps as described in the final rule titled the "energy Conservation Program: Energy Conservation Standards for General Service Fluorescent Lamps and Incandescent Reflector lamps," would not be a major federal action significantly affecting the quality of the human environment. Environmental Assessment for 10 CFR Part 430 Energy Conservation Standards: Energy Conservation Standards for Fluorescent and Incandescent Lamps,

404

Adaptive and Efficient Computing for Subsurface Simulation within ParFlow  

SciTech Connect

This project is concerned with the PF.WRF model as a means to enable more accurate predictions of wind fluctuations and subsurface storage. As developed at LLNL, PF.WRF couples a groundwater (subsurface) and surface water flow model (ParFlow) to a mesoscale atmospheric model (WRF, Weather Research and Forecasting Model). It was developed as a unique tool to address coupled water balance and wind energy questions that occur across traditionally separated research regimes of the atmosphere, land surface, and subsurface. PF.WRF is capable of simulating fluid, mass, and energy transport processes in groundwater, vadose zone, root zone, and land surface systems, including overland flow, and allows for the WRF model to both directly drive and respond to surface and subsurface hydrologic processes and conditions. The current PF.WRF model is constrained to have uniform spatial gridding below the land surface and matching areal grids with the WRF model at the land surface. There are often cases where it is advantageous for land surface, overland flow and subsurface models to have finer gridding than their atmospheric counterparts. Finer vertical discretization is also advantageous near the land surface (to properly capture feedbacks) yet many applications have a large vertical extent. However, the surface flow is strongly dependent on topography leading to a need for greater lateral resolution in some regions and the subsurface flow is tightly coupled to the atmospheric model near the surface leading to a need for finer vertical resolution. In addition, the interactions (e.g. rain) will be highly variable in space and time across the problem domain so an adaptive scheme is preferred to a static strategy to efficiently use computing and memory resources. As a result, this project focussed on algorithmic research required for development of an adaptive simulation capability in the PF.WRF system and its subsequent use in an application problem in the Central Valley of California. This report documents schemes of use for a future implementation of an adaptive grid capability within the ParFlow subsurface flow simulator in PF.WRF. The methods describe specific handling of the coarse/fine boundaries within a cell-centered discretization of the nonlinear parabolic Richards equation model for variable saturated flow. In addition, we describe development of a spline fit and table lookup method implemented within ParFlow to enhance computational efficiency of variably saturated flow calculations.

Tiedeman, H; Woodward, C S

2010-11-16T23:59:59.000Z

405

UN SYSTEME MULTI-AGENTS GOUVERNE PAR DES LOIS LINGUISTIQUES POUR LE TRAITEMENT DE LA LANGUE NATUREI,LE  

E-Print Network (OSTI)

TALISMAN UN SYSTEME MULTI-AGENTS GOUVERNE PAR DES LOIS LINGUISTIQUES POUR LE TRAITEMENT DE LA de Linguistique Frangaise 1700 Univcrsit6 de FRIBOURG. SUISSE ABSTRACT Natural language processinggration d'outils linguistiques o0 les diff6rents agents du sysl~me peuvent mettre en oeuvre des m6thodes

406

Release Notes: Version 8.0.20110608 of PARS II Release Date: 06/25/2011  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

| 1 | 1 Release Notes: Version 8.0.20110608 of PARS II Release Date: 06/25/2011 Section 1. System Enhancements CPP Upload Enhancement added - new functionality added that allows a System Administrator to select which CPP warnings appear or not appear in the Error/Warning report for a CPP upload o This functionality is available under Administration/Warning Configuration o When selected, the application will display a window with two columns: Projects and Warning Messages o User selects which project or projects for which they want to change the message display. o Then the user selects which messages from the list that they will not want to display in the report. Items checked do not display in the report as indicated by the message at the

407

Microsoft Word - PARS II User Guide V1.0.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

May 10, 2010 Submitted by: Energy Enterprise Solutions 20440 Century Blvd. Suite 150 Germantown, MD 20874 Phone 301-916-0050 Fax 301-916-0066 www.eesllc.net Project Assessment and Reporting System U U s s e e r r G G u u i i d d e e This page left blank intentionally. Title Page Document Name: PARS II User Guide V1.0 Publication Date: May 10, 2010 Contract Number: AM01-06IM00054 Project Number: 1ME07 CLIN 2 Written by: Jo Peck, EES Reviewed by: Ken Henderson, EES Steve Ducharme, PMC Judith Bernsen, PMC Approval: John Makepeace, OECM MA-50 This page left blank intentionally. Change Control Page Current Version # Date of Revision Section & Title Page Numbers Summary of Changes Author V1.0 5/10/2010 All All Changes from Peer Review, including

408

Configuring Client PCs for use with Project Assessment and Reporting System(PARS II)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4/2011 4/2011 Page 1 of 4 1 PROCEDURES 1.1 Introduction Most users will be comfortable with contacting their IT Helpdesk for completing the instructions below. However, if you have Admin rights on your workstation, and are comfortable with making configuration changes to it, you may follow these directions yourself. 1.2 Installation of ActiveX Control WINDOWS XP 1. Log onto the workstation to be configured using an ID/Password that can perform administrative functions on that workstation (e.g. Install software, add Active-X controls). Note that administrative access is only required for initial workstation configuration, not ongoing operation of the PARS II application. 2. Check hardware, software and network requirements as identified in section 2 below. Less than

409

H-Area, K-Area, and Par Pond Sewage Sludge Application Sites Groundwater Monitoring Report. Second quarter 1995  

SciTech Connect

During second quarter 1995, samples from monitoring wells at the K-Area Sewage Sludge Application Site (KSS wells) and Par Pond Sewage Sludge Application Site (PSS wells) were analyzed for constituents required by SCDHEC Construction Permit 13,173. H-Area Sewage Sludge Application Site (HSS wells) samples were analyzed for constituents required by SCDHEC Construction Permit 12,076. All samples are also analyzed as requested for other constituents as part of the Savannah River Site (SRS) Groundwater Monitoring Program. Annual analyses for other constituents, primarily metals, also are required by the permits. There were no constituents which exceeded the SCDHEC final Primary Drinking Water Standard in any well from the H-Area, K-Area, and Par Pond Sewage Sludge Application Sites. There were also no constituents which were above the SRS Flag 2 criteria in any well at the three sites during second quarter 1995.

Chase, J.A.

1995-09-01T23:59:59.000Z

410

Fixed tilt solar collector employing reversible vee-trough reflectors and vacuum tube receivers for solar heating and cooling systems. Final report. JPL Publication 77-78  

DOE Green Energy (OSTI)

The objective of the Vee-Trough/Vacuum Tube Collector (VTVTC) Project was to prove the usefulness of vee-trough concentrators in improving the efficiency and reducing the cost of collectors assembled from evacuated tube receivers. The VTVTC was analyzed rigorously and various mathematical models were developed to calculate the optical performance of the vee-trough concentrator and the thermal performance of the evacuated tube receiver. A test bed was constructed to verify the mathematical analyses and compare reflectors made out of glass, Alzak and aluminized FEP Teflon. Tests were run at temperatures ranging from 95 to 180/sup 0/C during the months of April, May, June, July and August 1977. Vee-trough collector efficiencies of 35 to 40% were observed at an operating temperature of about 175/sup 0/C. Test results compared well with the calculated values. Test data covering a complete day are presented for selected dates throughout the test season. Predicted daily useful heat collection and efficiency values are presented for a year's duration at operation temperatures ranging from 65 to 230/sup 0/C. Estimated collector costs and resulting thermal energy costs are presented. Analytical and experimental results are discussed along with a complete economic evaulation. Recommendations for the continuation of the project are presented.

Selcuk, M.K.

1977-12-01T23:59:59.000Z

411

Microsoft PowerPoint - PARS II CPP Deployment Schedule 13Aug10.pptx  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

MAY-SEPTEMBER 2010 MAY-SEPTEMBER 2010 CALENDAR YEAR PLAN (Projects post CD-2 w/Contractor Project Perfomance (CPP upload) As of: 13 Aug 10 2010 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 MAY EM-INL-CWI JUNE EM-ORP-BNI EM-Oak Ridge-Isotek EM/NA-LANL-LANS NA-Pantex- SC S JULY SC SLAC S f d SC LBNL UCLBNL 1 NA-Y12-BWXTY12 EM ORNL BJC SC-BNL-BSA NA-SRS-SAMS (MOX) EM-SRS-SRR EM SPRU WGI B&W Pantex SC-TJNAF-JSA AUGUST SC-SLAC-Stanford SC-LBNL-UCLBNL 1 EM-ORNL-BJC EM/NA-SRS-SRNS* EM/NA-SRS-SRNS* EM-SPRU-WGI NA-SNL-SCLM SEPTEMBER Labor Day EM/NA SRS SRNS EM/NA SRS SRNS NA SNL SCLM Weekend/ Holiday. Onsite Work Interface Operational SC-FNAL-FRA Sites can upload into PARS II production servers by the 7 th of the month following their Interface Operational date.

412

K-Area and Par Pond Sewage Sludge Application Sites Groundwater Monitoring Report. Fourth quarter 1992 and 1992 summary  

Science Conference Proceedings (OSTI)

During fourth quarter 1992, samples from the three monitoring wells at the K-Area site (KSS series) and the three monitoring wells at the Par Pond site (PSS series) were analyzed for constituents required by South Carolina Department of Health and Environmental Control Construction Permit 13, 173 and for other constituents as part of the Savannah River Site (SRS) Groundwater Monitoring Program. This report describes monitoring results that exceeded the final Primary Drinking Water Standards (PDWS) or the SRS flagging criteria. During fourth quarter 1992, no constituents analyzed exceeded the PDWS or the SRS Flag 2 criteria at the K-Area and Par Pond Sewage Sludge Application Sites. In the KSS well series, the field measurement for alkalinity ranged as high as 26 mg/L in well KSS 1D. Alkalinity measurements were zero in the PSS wells. Historical and current water-level elevations at the K-Area and Par Pond Sewage Sludge Application Site indicate that the groundwater flow directions are south to southwest (SRS grid coordinates).

Thompson, C.Y.

1993-04-01T23:59:59.000Z

413

EA-1664: Finding of No Significant Impact | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4: Finding of No Significant Impact 4: Finding of No Significant Impact EA-1664: Finding of No Significant Impact Energy Conservation Standards: Energy Conservation Standards for Fluorescent and Incandescent Lamps The U.S. Department of Energy has determined that the adoption of energy conservation standards for General Service Fluorescent Lamps and Incandescent Reflector Lamps as described in the final rule titled the "energy Conservation Program: Energy Conservation Standards for General Service Fluorescent Lamps and Incandescent Reflector lamps," would not be a major federal action significantly affecting the quality of the human environment. Finding of No Significant Impact for 10 CFR Part 430 Energy Conservation Standards: Energy Conservation Standards for Fluorescent and Incandescent

414

Lamps in the Leaping Over  

E-Print Network (OSTI)

‘dusgser gyi nya mo ‘khor lo bskor ba’i rgyud chen po: /rang byung lhun grub ‘bras bu n/ /gdod naslhun grub rang ‘char bas/ /’byung ba lnga la rag ma pas/ /sku gsung thugs la rten mi ‘cha’/ /gsalbyed rig pa’i sgron ma yi s/ /gter khyim phung po gsal byed... / /longs sku dang nisprul pa’i sku/ /chu shel sgron ma’i dpes mtshon kyang/da lta rang la ‘byung ma srid/ /khyung sgoma chag ‘phur mi nus/.14 See TTT 54, p. 504, eigthth chapter of the Byang chub kyi sems rin chen ‘khor lo: /sems nyid rigpa’i sgron ma yis...

Scheidegger, Daniel

2005-01-01T23:59:59.000Z

415

JOURNAL DE PHYSIQUE ColloqueC5, supplmentau no 11-12, Tome 34, Novembre-Dcembre 1973,page C5-11 SIMULATION PAR BOMBARDEMENT D'IONS Nif  

E-Print Network (OSTI)

-11 SIMULATION PAR BOMBARDEMENT D'IONS Nif DE MOYENNE Ã?NERGIE DES EFFETS D'IRRADIATION EN BILE DANS LE NICKEL ET

Paris-Sud XI, Université de

416

H-Area, K-Area, and Par Pond Sewage Sludge Application Sites groundwater monitoring report. Second quarter 1994  

SciTech Connect

Groundwater samples from the three wells at the H-Area Sewage Sludge Application Site (HSS wells) are analyzed quarterly for constituents as required by South Carolina Department of Health and Environmental Control (SCDHEC) Construction Permit 12,076. Samples from the three wells at the K-Area Sewage Sludge Application Site (KSS wells) and the three wells at the Par Pond Sewage Sludge Application Site (PSS wells) are analyzed quarterly for constituents required by SCDHEC Construction Permit 13,173. All samples are also analyzed as requested for other constituents as part of the Savannah River Site (SRS) Groundwater Monitoring Program. Annual analyses for other constituents, primarily metals, also are required by the permits. No constituents exceeded the SCDHEC final Primary Drinking Water Standard in any well from the H-Area, K-Area, and Par Pond Sewage Sludge Application Sites. Aluminum, iron, lead, and manganese, which were above standards and Flag 2 criteria in one or more wells in the three sites during first quarter 1994, were not analyzed this quarter. Second quarter results are similar to results for fourth quarter 1993.

1994-10-01T23:59:59.000Z

417

Improving the accuracy of flow units prediction through two committee machine models: An example from the South Pars Gas Field, Persian Gulf Basin, Iran  

Science Conference Proceedings (OSTI)

Intelligent reservoir characterization is a prerequisite study for development of oil and gas fields. Hydraulic flow units are mappable portions of hydrocarbon-bearing rocks that control fluid flow, and their modeling allows an accurate understanding ... Keywords: Committee machine, Flow units, Fuzzy logic, Genetic algorithm, Iran, Neural network, Neuro-fuzzy, South Pars Gas Field

Javad Ghiasi-Freez; Ali Kadkhodaie-Ilkhchi; Mansur Ziaii

2012-09-01T23:59:59.000Z

418

H-Area, K-Area, and Par Pond Sewage Sludge Application sites groundwater monitoring report. First quarter 1995  

SciTech Connect

During first quarter 1995, samples from monitoring wells at the K-Area Sewage Sludge Application Site (KSS wells) and Par Pond Sewage Sludge Application Site (PSS wells) were analyzed for constituents required by SCDHEC Construction Permit 13,173. H-Area Sewage Sludge Application Site (HSS wells) samples were analyzed for constituents required by SCDHEC Construction Permit 12,076. All samples are also analyzed as requested for other constituents as part of the Savannah River Site (SRS) Groundwater Monitoring Program. Annual analyses for other constituents, primarily metals, also are required by the permits. The only constituent that exceeded the SCDHEC final Primary Drinking Water Standard in any well was lead which was found in wells HSS 3D and PSS 3D. Aluminum and iron were above Flag 2 criteria in one or more wells in the three sites during first quarter 1995.

Chase, J.A.

1995-06-01T23:59:59.000Z

419

Microsoft Word - Configuring Workstations for use with the PARS II System.V3.0.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

30/2010 30/2010 1 PROCEDURES 1.1 Introduction Most users will be comfortable with contacting their IT Helpdesk for completing the instructions below. However, If you have Admin rights on your workstation, and are comfortable with making configuration changes to it, you may follow these directions yourself. 1.2 Installation of Dekker, Ltd. ActiveX Control 1. Log onto the workstation to be configured using an ID/Password that can perform administrative functions on the workstation being configured (e.g. Install software, add Active-X controls). Note that administrative access is only required for initial workstation configuration, not ongoing operation of the PARS II application on the workstation. 2. Check hardware, software and network requirements as identified in section 2 below.

420

Compliance Certification Enforcement | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

(2010-CE-1012) DOE alleged in a Notice of Proposed Civil Penalty that Aero-Tech Light Bulb Co. failed to certify a variety of incandescent reflector lamps as compliant with...

Note: This page contains sample records for the topic "reflector par lamps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

(2010-CE-1012) DOE alleged in a Notice of Proposed Civil Penalty that Aero-Tech Light Bulb Co. failed to certify a variety of incandescent reflector lamps as compliant with...

422

Solid-State Lighting: CALiPER Report 20.1: Subjective Evaluation of Beam  

NLE Websites -- All DOE Office Websites (Extended Search)

Report 20.1: Subjective Report 20.1: Subjective Evaluation of Beam Quality, Shadow Quality, and Color Quality for LED PAR38 Lamps to someone by E-mail Share Solid-State Lighting: CALiPER Report 20.1: Subjective Evaluation of Beam Quality, Shadow Quality, and Color Quality for LED PAR38 Lamps on Facebook Tweet about Solid-State Lighting: CALiPER Report 20.1: Subjective Evaluation of Beam Quality, Shadow Quality, and Color Quality for LED PAR38 Lamps on Twitter Bookmark Solid-State Lighting: CALiPER Report 20.1: Subjective Evaluation of Beam Quality, Shadow Quality, and Color Quality for LED PAR38 Lamps on Google Bookmark Solid-State Lighting: CALiPER Report 20.1: Subjective Evaluation of Beam Quality, Shadow Quality, and Color Quality for LED PAR38 Lamps on Delicious Rank Solid-State Lighting: CALiPER Report 20.1: Subjective

423

Production d'ions lourds multicharges par une source d'ions à laser $CO_{2}$. Utilisation de ces ions pour l'étude de l'interaction ion-surface métallique  

E-Print Network (OSTI)

Production d'ions lourds multicharges par une source d'ions à laser $CO_{2}$. Utilisation de ces ions pour l'étude de l'interaction ion-surface métallique

Amdidouche, Y

1995-01-01T23:59:59.000Z

424

constante, qui a d'ailleurs t considre par H. Becque-rel pour le crown et diffrents verres de flint.  

E-Print Network (OSTI)

verres de flint. La première colonne du tableau ci-dessous contient les numéros de fabrication des verres ~71,'~ à 772 et pour les flints de 86~ à 965,5. H. Becquerel avait trouvé pour le crown el des nombres variant entre 0,~0'1 et 0,234 pour les flints. , SUR LA TRANSPARENCE DES CORPS AUX RAYONS X; Par EDM. VAN

Paris-Sud XI, Université de

425

H-Area, K-Area, and Par Pond Sewage Sludge Application Sites groundwater monitoring report. Third quarter 1994  

SciTech Connect

Groundwater samples from the three wells at the H-Area Sewage Sludge Application Site (HSS wells) are analyzed quarterly for constituents as required by South Carolina Department of Health and Environmental Control (SCDHEC) Construction Permit 12,076. Samples from the three wells at the K-Area Sewage Sludge Application Site (KSS wells) and the three wells at the quired by SCDHEC Construction Permit 13,173. All samples are also analyzed as requested for other constituents as part of the Savannah River Site (SRS) Groundwater Monitoring Program. Annual analyses for other constituents, primarily metals, also are required by the permits. No constituents exceeded the SCDHEC final Primary Drinking Water Standard in any well from the H-Area, K-Area, and Par Pond Sewage Sludge Application Sites. Aluminum and iron were above Flag 2 criteria in one or more wells in the three sites during third quarter 1994. These constituents were not analyzed during the previous quarter. Third quarter results are similar to results for first quarter 1994.

1995-01-01T23:59:59.000Z

426

H-Area, K-Area, and Par Pond Sewage Sludge Application Sites groundwater monitoring report. First quarter 1994  

SciTech Connect

Samples from the three wells at the H-Area Sewage Sludge Application Site (HSS wells) are analyzed quarterly for constituents as required by South Carolina Department of Health and Environmental Control (SCDHEC) Construction Permit 12,076. Samples from the three Wells at the K-Area Sewage Sludge Application Site (KSS wells) and the three wells at the Par Pond Sewage Sludge Application Site (PSS wells) are analyzed quarterly for constituents required by SCDHEC Construction Permit 13,173. All samples are also analyzed as requested for other constituents as part of the Savannah River Site (SRS) Groundwater Monitoring Program. Annual analyses for other constituents, primarily metals, also are required by the permits. Lead presently exceeds the SCDHEC final Primary Drinking Water Standard in two wells from the three sites. As in third quarter 1993, aluminum, iron, and lead were reported in excess of the SRS Flag 2 criteria during first quarter 1994. An elevated concentration of manganese was found in one well at the K-Area Sewage Sludge Application Site during first quarter.

1994-07-01T23:59:59.000Z

427

Efficient wide-aperture neodymium glass rod amplifiers  

SciTech Connect

Amplifiers based on neodymium phosphate glass rods 60 - 100 mm in diameter are experimentally studied. The amplifiers are pumped by INP-16/250 tubular flash lamps placed in a universal pump cavity with a two-section mirror reflector. A compact high-voltage capacitive energy storage with a preionisation circuit was developed to supply the lamps. (lasers)

Potemkin, A K; Zhurin, K A; Kirsanov, A V; Kopelovich, E A; Kuznetsov, M V; Kuz'min, A A; Flat, F A; Khazanov, Efim A; Shaikin, A A [Institute of Applied Physics, Russian Academy of Sciences, Nizhny Novgorod (Russian Federation)

2011-06-30T23:59:59.000Z

428

OpenEI - PAR  

Open Energy Info (EERE)

by INPE -National Institute for Space Research) were used to produce the dataset and SHAPE files

License

429

Prsente par : Antoine Fournier  

E-Print Network (OSTI)

Function LSF : Leaf Spectro Fluorimeter LUE : Light Use Efficiency MODTRAN : Moderate TRANsmission code

430

Double Sens Uniques par  

E-Print Network (OSTI)

design," IEEE Electron Device Lett., vol. 28, no. 6, pp. 479­481, Jun. 2007. [13] R. A. Coutu, Jr., P. E. Technol., vol. 25, no. 3, pp. 397­401, Sep. 2002. [16] R. A. Coutu, "Electrostatic radio frequency (RF

van de Walle, Axel

431

prsente par Julien COMTE  

E-Print Network (OSTI)

................................................................................................................... 23 I.3.2.1. La conversion catalytique selon Fisher-Tropsch du procédé Fisher

Paris-Sud XI, Université de

432

Growth and properties of InGaAs/FeAl/InAlAs/InP heterostructures for buried reflector/interconnect applications in InGaAs thermophotovoltaic devices  

DOE Green Energy (OSTI)

Thermophotovoltaic cells consisting of InGaAs active layers are of extreme promise for high efficiency, low bandgap TPV conversion. In the monolithic interconnected module configuration, the presence of the InGaAs lateral conduction layer (LCL) necessary for the series connection between TPV cells results in undesirable free carrier absorption, causing a tradeoff between series resistance and optical absorption losses in the infrared. A potential alternative is to replace the LCL with an epitaxial metal layer that would provide a low-resistance interconnect while not suffering from free carrier absorption. The internal metal layer would also serve as an efficient, panchromatic back surface reflector, providing the additional advantage of increased effective optical thickness of the InGaAs cell. In this paper, the authors present the first results on the growth and development of buried epitaxial metal layers for TPV applications. High quality, single crystal, epitaxial Fe{sub x}Al{sub 1{minus}x} layers were grown on InAlAs/InP substrates, having compositions in the range x = 0.40--0.80. Epitaxial metal layers up to 1,000 {angstrom} in thickness were achieved, with excellent uniformity over large areas and atomically smooth surfaces. X-ray diffraction studies indicate that all FeAl layers are strained with respect to the substrate, for the entire composition range studied and for all thicknesses. The FeAl layers exhibit excellent resistance characteristics, with resistivities from 60 {micro}ohm-cm to 100 {micro}ohm-cm, indicating that interface scattering has a negligible effect on lateral conductivity. Reflectance measurements show that the FeAl thickness must be at least 1,000 {angstrom} to achieve > 90% reflection in the infrared.

Ringel, S.A.; Sacks, R.N.; Qin, L. [Ohio State Univ., Columbus, OH (United States). Dept. of Electrical Engineering; Clevenger, M.B.; Murray, C.S. [Bettis Atomic Power Lab., West Mifflin, PA (United States)

1998-11-01T23:59:59.000Z

433

STATEMENT OF CONSIDERATIONS REQUEST BY CREE LIGHTING COMPANY, FOR AN ADVANCE WAIVER OF DOMESTIC AND  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

20 2001 09:52 FR IPL DOE CH 630 252 2779 TO FGCP-HQ P.02/04 20 2001 09:52 FR IPL DOE CH 630 252 2779 TO FGCP-HQ P.02/04 * * STATEMENT OF CONSIDERATIONS REQUEST BY CREE LIGHTING COMPANY, FOR AN ADVANCE WAIVER OF DOMESTIC AND FOREIGN INVENTION RIGHTS UNDER DOE COOPERATIVE AGREEMENT NO. DE-FC26- 00NT40985 W(A)-01-002, CH-1055 The Petitioner, Cree Lighting Company, (Cree), was awarded this cooperative agreement for the performance of work entitled, "Energy Efficient Solid State Lamp". The purpose of the cooperative agreement is to develop high efficiency, high radiance light emitting diode (LED) chip and packaging technology that is expected to lead to novel solid state lamps capable of replacing less energy efficient incandescent and halogen reflector lamps. When compared with current incandescent reflector lamps, this revolutionary new lamp is expected to be three times more

434

A committee machine with intelligent systems for estimation of total organic carbon content from petrophysical data: An example from Kangan and Dalan reservoirs in South Pars Gas Field, Iran  

Science Conference Proceedings (OSTI)

Total organic carbon (TOC) content present in reservoir rocks is one of the important parameters, which could be used for evaluation of residual production potential and geochemical characterization of hydrocarbon-bearing units. In general, organic-rich ... Keywords: Committee machine, Fuzzy logic, Genetic algorithm, Neural network, Neuro-fuzzy, Petrophysical data, South Pars Gas Field, Total organic carbon

Ali Kadkhodaie-Ilkhchi; Hossain Rahimpour-Bonab; Mohammadreza Rezaee

2009-03-01T23:59:59.000Z

435

Artificial neural network modeling and cluster analysis for organic facies and burial history estimation using well log data: A case study of the South Pars Gas Field, Persian Gulf, Iran  

Science Conference Proceedings (OSTI)

Intelligent and statistical techniques were used to extract the hidden organic facies from well log responses in the Giant South Pars Gas Field, Persian Gulf, Iran. Kazhdomi Formation of Mid-Cretaceous and Kangan-Dalan Formations of Permo-Triassic Data ... Keywords: Artificial neural network, Burial history, Cluster analysis, Organic facies, Rock-Eval pyrolysis, Well log data

Bahram Alizadeh; Saeid Najjari; Ali Kadkhodaie-Ilkhchi

2012-08-01T23:59:59.000Z

436

H-Area, K-Area, and Par Pond Sewage Sludge Application Sites Groundwater Monitoring Report. Fourth quarter 1994 and 1994 summary  

SciTech Connect

Groundwater samples from the three wells at the H-Area Sewage Sludge Application Site (HSS wells) are analyzed quarterly for constituents as required by South Carolina Department of Health and Environmental Control Construction Permit 12,076. Samples from the three wells at the K-Area Sewage Sludge Application Site (KSS wells) and the three wells at the Par Pond Sewage Sludge Application Site (PSS wells) are analyzed quarterly for constituents required by SCDHEC Construction Permit 13,173. All samples are also analyzed as requested for other constituents as part of the Savannah River Site Groundwater Monitoring Program. Annual analyses for other constituents, primarily metals. also are required by the permits.

Chase, J.A.

1995-04-01T23:59:59.000Z

437

Optical Reflectance Measurements for Commonly Used Reflectors  

E-Print Network (OSTI)

AC02-05CH11231, grant number NNSA LB06-316-PD05 / NN2001000.AC02-05CH11231, grant number NNSA LB06-316-PD05 / NN2001000.

Janecek, Petr Martin

2009-01-01T23:59:59.000Z

438

Optical Reflectance Measurements for Commonly Used Reflectors  

E-Print Network (OSTI)

Office of Defense Nuclear Nonproliferation, Officeof Nuclear Nonproliferation Research and Engineering (NA-22)of Defense Nuclear Nonproliferation, Office of Nuclear

Janecek, Petr Martin

2009-01-01T23:59:59.000Z

439

Solar module having reflector between cells  

DOE Patents (OSTI)

A photovoltaic module comprising an array of electrically interconnected photovoltaic cells disposed in a planar and mutually spaced relationship between a light-transparent front cover member in sheet form and a back sheet structure is provided with a novel light-reflecting means disposed between adjacent cells for reflecting light falling in the areas between cells back toward said transparent cover member for further internal reflection onto the solar cells. The light-reflecting comprises a flexible plastic film that has been embossed so as to have a plurality of small V-shaped grooves in its front surface, and a thin light-reflecting coating on said front surface, the portions of said coating along the sides of said grooves forming light-reflecting facets, said grooves being formed so that said facets will reflect light impinging thereon back into said transparent cover sheet with an angle of incidence greater than the critical angle, whereby substantially all of the reflected light will be internally reflected from said cover sheet back to said solar modules, thereby increasing the current output of the module.

Kardauskas, Michael J. (Billerica, MA)

1999-01-01T23:59:59.000Z

440

Correlated-Intensity velocimeter for Arbitrary Reflector  

SciTech Connect

A velocimetry apparatus and method comprising splitting incoming reflected laser light and directing the laser light into first and second arms, filtering the laser light with passband filters in the first and second arms, one having a positive passband slope and the other having a negative passband slope, and detecting the filtered laser light via light intensity detectors following the passband filters in the first and second arms

Wang, Zhehui (Los Alamos, NM); Luo, Shengnian (Los Alamos, NM); Barnes, Cris W. (Arlington, VA); Paul, Stephen F. (West Orange, NJ)

2008-11-11T23:59:59.000Z

Note: This page contains sample records for the topic "reflector par lamps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Available Technologies: Selective Reflectors Bring High ...  

... semiconductor materials could dramatically decrease the cost of solar cells and make them more competitive with fossil fuels, ...

442

Advanced Manufacture of Reflectors (Fact Sheet)  

DOE Green Energy (OSTI)

The University of Arizona is one of the 2012 SunShot CSP R&D awardees for their advanced collectors. This fact sheet explains the motivation, description, and impact of the project.

Not Available

2012-09-01T23:59:59.000Z

443

Optical Reflectance Measurements for Commonly Used Reflectors  

E-Print Network (OSTI)

by the National Nuclear Security Administration, Office ofby the National Nuclear Security Administration, Office of

Janecek, Petr Martin

2009-01-01T23:59:59.000Z

444

Reflector-coupled fluorescent solar collector  

SciTech Connect

The present invention provides a system for the collection of electromagnetic radiation and the transmission of that radiation to a point of use. In its simplest sense, an apparatus for the collection and transmission of electromagnetic radiation comprises a cylindrical fluorescent fiber, at least one end of which is optically coupled to an optical wave guide, and means for reflecting solar radiation impinging over a relatively wide area onto said cylindrical fluorescent fiber. Preferably, a compound parabolic mirror is employed for reflecting incident solar radiation onto the optical fluorescent fiber.

Younghouse, L.B.

1984-01-17T23:59:59.000Z

445

PARCOURS DES ALPHA DE 4,5 MeV DANS L'URANIUM, L'OR, LE ZIRCONIUM ET LE SILICIUM. Par Mmes A. GARIN et H. FARAGGI,  

E-Print Network (OSTI)

76. PARCOURS DES ALPHA DE 4,5 MeV DANS L'URANIUM, L'OR, LE ZIRCONIUM ET LE SILICIUM. Par Mmes A uranium alloys of known concentration in uranium it is possible to measure the range of 4,5 MeV 03B1 mesurant l'émission oc d'alliages d'uranium de différentes concentrations. Nous avons pu disposer d

Paris-Sud XI, Université de

446

ZPR-3 Assembly 11 : A cylindrical sssembly of highly enriched uranium and depleted uranium with an average {sup 235}U enrichment of 12 atom % and a depleted uranium reflector.  

Science Conference Proceedings (OSTI)

Over a period of 30 years, more than a hundred Zero Power Reactor (ZPR) critical assemblies were constructed at Argonne National Laboratory. The ZPR facilities, ZPR-3, ZPR-6, ZPR-9 and ZPPR, were all fast critical assembly facilities. The ZPR critical assemblies were constructed to support fast reactor development, but data from some of these assemblies are also well suited for nuclear data validation and to form the basis for criticality safety benchmarks. A number of the Argonne ZPR/ZPPR critical assemblies have been evaluated as ICSBEP and IRPhEP benchmarks. Of the three classes of ZPR assemblies, engineering mockups, engineering benchmarks and physics benchmarks, the last group tends to be most useful for criticality safety. Because physics benchmarks were designed to test fast reactor physics data and methods, they were as simple as possible in geometry and composition. The principal fissile species was {sup 235}U or {sup 239}Pu. Fuel enrichments ranged from 9% to 95%. Often there were only one or two main core diluent materials, such as aluminum, graphite, iron, sodium or stainless steel. The cores were reflected (and insulated from room return effects) by one or two layers of materials such as depleted uranium, lead or stainless steel. Despite their more complex nature, a small number of assemblies from the other two classes would make useful criticality safety benchmarks because they have features related to criticality safety issues, such as reflection by soil-like material. ZPR-3 Assembly 11 (ZPR-3/11) was designed as a fast reactor physics benchmark experiment with an average core {sup 235}U enrichment of approximately 12 at.% and a depleted uranium reflector. Approximately 79.7% of the total fissions in this assembly occur above 100 keV, approximately 20.3% occur below 100 keV, and essentially none below 0.625 eV - thus the classification as a 'fast' assembly. This assembly is Fast Reactor Benchmark No. 8 in the Cross Section Evaluation Working Group (CSEWG) Benchmark Specificationsa and has historically been used as a data validation benchmark assembly. Loading of ZPR-3 Assembly 11 began in early January 1958, and the Assembly 11 program ended in late January 1958. The core consisted of highly enriched uranium (HEU) plates and depleted uranium plates loaded into stainless steel drawers, which were inserted into the central square stainless steel tubes of a 31 x 31 matrix on a split table machine. The core unit cell consisted of two columns of 0.125 in.-wide (3.175 mm) HEU plates, six columns of 0.125 in.-wide (3.175 mm) depleted uranium plates and one column of 1.0 in.-wide (25.4 mm) depleted uranium plates. The length of each column was 10 in. (254.0 mm) in each half of the core. The axial blanket consisted of 12 in. (304.8 mm) of depleted uranium behind the core. The thickness of the depleted uranium radial blanket was approximately 14 in. (355.6 mm), and the length of the radial blanket in each half of the matrix was 22 in. (558.8 mm). The assembly geometry approximated a right circular cylinder as closely as the square matrix tubes allowed. According to the logbook and loading records for ZPR-3/11, the reference critical configuration was loading 10 which was critical on January 21, 1958. Subsequent loadings were very similar but less clean for criticality because there were modifications made to accommodate reactor physics measurements other than criticality. Accordingly, ZPR-3/11 loading 10 was selected as the only configuration for this benchmark. As documented below, it was determined to be acceptable as a criticality safety benchmark experiment. A very accurate transformation to a simplified model is needed to make any ZPR assembly a practical criticality-safety benchmark. There is simply too much geometric detail in an exact (as-built) model of a ZPR assembly, even a clean core such as ZPR-3/11 loading 10. The transformation must reduce the detail to a practical level without masking any of the important features of the critical experiment. And it must do this without increasing the total uncertain

Lell, R. M.; McKnight, R. D.; Tsiboulia, A.; Rozhikhin, Y.; National Security; Inst. of Physics and Power Engineering

2010-09-30T23:59:59.000Z

447

851 S.W. Sixth Avenue, Suite 1100 Steve Crow 503-222-5161 Portland, Oregon 97204-1348 Executive Director 800-452-5161  

E-Print Network (OSTI)

's Fifth Power Plan, in the form of light-emitting diode (LED) traffic lights. In the Sixth Power Plan, LED Snap Shot July 2013 Higher US Saturation for LED Reflector Lamps Source: DOE/EERE Adoption of LightEmitting Diodes in Common Lighting Applications, April 2013, Revised May 2013 #12;9/4/2013 11 Bulb Cost Trends

448

Buildings Energy Data Book: 7.6 Efficiency Standards for Lighting  

Buildings Energy Data Book (EERE)

2 2 Efficiency Standards for Incandescent Reflector Lamps (1) Effective for lamps manufactured after November 1, 1995 and before July 14, 2012 Minimum Nominal Average Lamp Lamp Wattage Efficacy (lm/W) 40-50 10.5 51-66 11.0 67-85 12.5 86-115 14.0 116-155 14.5 156-205 15.0 Effective for lamps manufactured on or after July 14, 2012 Minimum Rated Lamp Rated Average Lamp Lamp Wattage Lamp Spectrum Diameter (in) Voltage (V) Efficacy (lm/W) (2) 40-205 Standard Spectrum >2.5 ≥125 6.8*P^0.27 40-205 Standard Spectrum >2.5 <125 5.9*P^0.27 40-205 Standard Spectrum ≤2.5 ≥125 5.7*P^0.27 40-205 Standard Spectrum ≤2.5 <125 5.0*P^0.27 40-205 Modified Spectrum >2.5 ≥125 5.8*P^0.27 40-205 Modified Spectrum >2.5 <125 5.0*P^0.27 40-205 Modified Spectrum ≤2.5 ≥125 4.9*P^0.27

449

Conservation Potential of Compact Fluorescent Lamps in India and Brazil  

E-Print Network (OSTI)

in distribution transformers for power factor correction.of the power factors at the distribution transformers, or at

Gadgil, A.J.

2008-01-01T23:59:59.000Z

450

COST EFFECTIVENESS OF LONG LIFE INCANDESCENT LAMPS AND ENERGY BUTTONS  

E-Print Network (OSTI)

certain whether the electrical power is off or on, he may beof light. The electrical input (power, voltage and current)

Verderber, Rudy

2013-01-01T23:59:59.000Z

451

L Prize Competition Winner: 60W Incandescent Replacement Lamp  

NLE Websites -- All DOE Office Websites (Extended Search)

Prize Partners 14 15 Field Assessments: Retail Platte River Power Authority DTE Energy SMUD 16 Additional Opportunities: GATEWAY Demonstrations of LED Outdoor Lighting Reports...

452

A Study on Electrodes for Capacitive Discharging UV Lamp  

Science Conference Proceedings (OSTI)

J10: Mechanical Properties and Welding Conditions of Monopile and Transition for Offshore Wind Plant · J12: Microstructure and Mechanical Properties of ...

453

Characterization of Fluorescent Lamp Glass Waste Powders for ...  

Science Conference Proceedings (OSTI)

The glass waste presents favorable characteristics for incorporation into clayey ceramic ... Codin, Located in Campos (RJ), to Produce Soil-Cement Blocks.

454

Recycling of Fluorescent Lamp Glass into Clayey Ceramic  

Science Conference Proceedings (OSTI)

Designing a Collaborative System for Socio-Environmental Management of ... Oils Post-Consumption Residential and Commercial Clay with Two Brazilian.

455

Zero energy-storage ballast for compact fluorescent lamps  

DOE Patents (OSTI)

A CFL ballast includes complementary-type switching devices connected in series with their gates connected together at a control node. The switching devices supply a resonant tank circuit which is tuned to a frequency near, but slightly lower than, the resonant frequency of a resonant control circuit. As a result, the tank circuit restarts oscillations immediately following each zero crossing of the bus voltage. Such rapid restarts avoid undesirable flickering while maintaining the operational advantages and high efficacy of the CFL ballast. 4 figs.

Schultz, W.N.; Thomas, R.J.

1999-08-31T23:59:59.000Z

456

COST EFFECTIVENESS OF LONG LIFE INCANDESCENT LAMPS AND ENERGY BUTTONS  

E-Print Network (OSTI)

placed into light bulb sockets (Edison sockets) and the lampbe inserted into the same Edison type socket that is usedto injury. In addition, Edison sockets that are hori~

Verderber, Rudy

2013-01-01T23:59:59.000Z

457

Conservation Potential of Compact Fluorescent Lamps in India and Brazil  

E-Print Network (OSTI)

representative electricity prices, because the residentialand 11. The range of electricity prices shown in the Figs.between mar- ginal electricity prices and residential tariff

Gadgil, A.J.

2008-01-01T23:59:59.000Z

458

Conservation Potential of Compact Fluorescent Lamps in India and Brazil  

E-Print Network (OSTI)

and commercial electricity tariffs in each country. Noticemar- ginal electricity prices and residential tariff~. Anelectricity prices, because the residential tariff structure

Gadgil, A.J.

2008-01-01T23:59:59.000Z

459

Candelabra and Intermediate Base Lamps Enforcement Policy Statement  

Energy.gov (U.S. Department of Energy (DOE))

The Department issued guidance today advising manufacturers, importers and private labelers that DOE will not enforce the energy conservation standards and compliance certification requirements for...

460

The Therapeutic Lamp: Treating Small-Animal Phobias  

Science Conference Proceedings (OSTI)

We all have an irrational fear or two. Some of us get scared by an unexpected visit from a spider in our house; others get nervous when they look down from a high building. Fear is an evolutionary and adaptive function that can promote self-preservation ... Keywords: Animals,Medical treatment,Games,Visualization,Augmented reality,computer graphics,augmented reality,cockroach phobia,spider phobia,arachnophobia,anxiety,anxiety disorders,phobias,phobia therapy,psychological treatment

Maja Wrzesien, Mariano Alcaniz, Cristina Botella, Jean-Marie Burkhardt, Juana Breton-Lopez, Mario Ortega, Daniel Beneito Brotons

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "reflector par lamps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

L Prize Competition Winner 60W Incandesent Replacement Lamp Update  

NLE Websites -- All DOE Office Websites (Extended Search)

soon. --Senator Jeff Bingaman, D-NM What's the Buzz? - Would You Buy A 60 Light Bulb That Lasts 20 Years? -game-changing technology L Prize Helps Federal Purchasers:...

462

iLamps: geometrically aware and self-configuring projectors  

Science Conference Proceedings (OSTI)

Projectors are currently undergoing a transformation as they evolve from static output devices to portable, environment-aware, communicating systems. An enhanced projector can determine and respond to the geometry of the display surface, and can be used ... Keywords: ad-hoc clusters, augmented reality, calibration, projector, quadric transfer, seamless display

Ramesh Raskar; Jeroen van Baar; Paul Beardsley; Thomas Willwacher; Srinivas Rao; Clifton Forlines

2005-07-01T23:59:59.000Z

463

iLamps: geometrically aware and self-configuring projectors  

Science Conference Proceedings (OSTI)

Projectors are currently undergoing a transformation as they evolve from static output devices to portable, environment-aware, communicating systems. An enhanced projector can determine and respond to the geometry of the display surface, and can be used ... Keywords: ad-hoc clusters, augmented reality, calibration, projector, quadric transfer, seamless display

Ramesh Raskar; Jeroen van Baar; Paul Beardsley; Thomas Willwacher; Srinivas Rao; Clifton Forlines

2006-07-01T23:59:59.000Z

464

Conservation Potential of Compact Fluorescent Lamps in India and Brazil  

E-Print Network (OSTI)

1.7% of in- stalled hydroelectric capacity. Op. cit. ref [in Ig86) based on hydroelectric generation, and most of thethe still abundant hydroelectric potential of the country.

Gadgil, A.J.

2008-01-01T23:59:59.000Z

465

Conservation Potential of Compact Fluorescent Lamps in India and Brazil  

E-Print Network (OSTI)

the functions of generation and distribution are separated,undertake generation, transmission, and distribution (e.g.paid by the distribution utility to the generation utility.

Gadgil, A.J.

2008-01-01T23:59:59.000Z

466

Max Tech and Beyond: High-Intensity Discharge Lamps  

E-Print Network (OSTI)

demonstration (like street lights) and commercialization andthe dominant light source for street and roadway lighting,has been a popular light source for street lighting because

Scholand, Michael

2012-01-01T23:59:59.000Z

467

Spectroscopy on Metal-Halide Lamps under Varying Gravity Conditions  

E-Print Network (OSTI)

orange street lighting), which has a slightly lower discharge conversion efficiency, but the 589 nm line. They are mainly used for applications where a high light output is desired; examples are shop lighting, street. Haverlag Copromotor: dr.ir. W.W. Stoffels Copyright c 2008 by A.J. Flikweert This research was financially

Eindhoven, Technische Universiteit

468

Max Tech and Beyond: High-Intensity Discharge Lamps  

E-Print Network (OSTI)

presents the national energy consumption profile for HIDVolume I: National Lighting Inventory and Energy Consumption

Scholand, Michael

2012-01-01T23:59:59.000Z

469

Ancient Lamps, Earrings Yield Their Secrets Under Neutron Imaging...  

NLE Websites -- All DOE Office Websites (Extended Search)

(3-D) neutron images have been taken of rare archaeological artifacts. Bronze and brass artifacts excavated at the ancient city of Petra, in present day Jordan, were recently...

470

Flash Lamp Curing of Printed Nano-Particle Films  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, Materials Science & Technology 2009. Symposium, Controlled Processing of Nanoparticle-Based Materials and Nanostructured ...

471

Conservation Potential of Compact Fluorescent Lamps in India and Brazil  

E-Print Network (OSTI)

1988. The private sector in Brazil owned (in 1986) 40% ofElectricity Conservation in Brazil: Potential and Pro-electricity consumption in Brazil's residential sector was

Gadgil, A.J.

2008-01-01T23:59:59.000Z

472

Phosphor blends for high-CRI fluorescent lamps  

DOE Patents (OSTI)

A phosphor blend comprises at least two phosphors each selected from one of the groups of phosphors that absorb UV electromagnetic radiation and emit in a region of visible light. The phosphor blend can be applied to a discharge gas radiation source to produce light sources having high color rendering index. A phosphor blend is advantageously includes the phosphor (Tb,Y,LuLa,Gd).sub.x(Al,Ga).sub.yO.sub.12:Ce.sup.3+, wherein x is in the range from about 2.8 to and including 3 and y is in the range from about 4 to and including 5.

Setlur, Anant Achyut (Niskayuna, NY); Srivastava, Alok Mani (Niskayuna, NY); Comanzo, Holly Ann (Niskayuna, NY); Manivannan, Venkatesan (Clifton Park, NY); Beers, William Winder (Chesterland, OH); Toth, Katalin (Pomaz, HU); Balazs, Laszlo D. (Budapest, HU)

2008-06-24T23:59:59.000Z

473

Stadiums and arenas use efficient, high wattage lamps - Today in ...  

U.S. Energy Information Administration (EIA)

Tools; Glossary › All Reports ... weather; gasoline; capacity; exports; nuclear; forecast; View All Tags ...

474

Apparatus to facilitate lengthening the life of incandescent lamps  

SciTech Connect

An energizing circuit is described for an incandescent bulb comprising a transformer having a primary winding connectable to an AC mains source and first and second secondary windings for producing first and second voltages. The first secondary winding is connected to an input of a first full-wave rectifier means and the second secondary winding is connected to an input of a second full-wave rectifier means, the full-wave rectifier means having outputs connected in parallel across the bulb. The first voltage is sufficient to fully illuminate the bulb and the second voltage is sufficient to maintain the bulb warm but with little or no light output, a first switch being connected between the first secondary winding and the first rectifier means whereby, when the first switch is open, the bulb is energized solely by the second voltage.

Spissinger, F.H.

1987-03-17T23:59:59.000Z

475

Series Resonant Inverter with Contactless Transformers for Multiple LED Lamps.  

E-Print Network (OSTI)

??A half-bridge series-resonant inverter adopted to realize the quasi current source and the constant current source with a number of contactless transformers in series for… (more)

Cheng, Shuen-Wen

2013-01-01T23:59:59.000Z

476

NOPM and Availability of Framework Document for HID Lamps  

NLE Websites -- All DOE Office Websites (Extended Search)

8:48 Feb 27, 2012 8:48 Feb 27, 2012 Jkt 226001 PO 00000 Frm 00008 Fmt 4702 Sfmt 4702 E:\FR\FM\28FEP1.SGM 28FEP1 mstockstill on DSK4VPTVN1PROD with PROPOSALS Federal Register / Vol. 77, No. 39 / Tuesday, February 28, 2012 / Proposed Rules 11785 collections for particular program, except where required by statute. III. Questions for Comment The list below includes the questions about these reform ideas that address issues which are of greatest interest to OMB at this stage of the process. Comments addressing any other concerns, and other types of feedback, are also welcome. In addition, as was explained at the beginning of this notice, the public comments received by OMB will be posted on OMB's Web site and at http:// www.regulations.gov. Accordingly, please do not include in your comments

477

Zero energy-storage ballast for compact fluorescent lamps  

DOE Patents (OSTI)

A CFL ballast includes complementary-type switching devices connected in series with their gates connected together at a control node. The switching devices supply a resonant tank circuit which is tuned to a frequency near, but slightly lower than, the resonant frequency of a resonant control circuit. As a result, the tank circuit restarts oscillations immediately following each zero crossing of the bus voltage. Such rapid restarts avoid undesirable flickering while maintaining the operational advantages and high efficacy of the CFL ballast.

Schultz, William Newell (Niskayuna, NY); Thomas, Robert James (Rexford, NY)

1999-01-01T23:59:59.000Z

478

Electronic Fluorescent Lamp Ballasts Used in 4-Foot Fixtures  

Science Conference Proceedings (OSTI)

This power quality (PQ) case study presents tests performed at the EPRI Power Electronics Applications Center (PEAC) Power Quality Test Facility to characterize ballast energy performance, emissions, and immunity from a PQ perspective.

2003-12-31T23:59:59.000Z

479

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

51 - 5160 of 8,172 results. 51 - 5160 of 8,172 results. Download CX-007850: Categorical Exclusion Determination Notice of Proposed Rulemaking for Energy Conservation Standards for Certain Reflector, Elliptical Reflector, and Bulged Reflector Incandescent Reflector Lamps CX(s) Applied: B5.1 Date: 01/09/2012 Location(s): Nationwide Offices(s): Energy Efficiency and Renewable Energy http://energy.gov/nepa/downloads/cx-007850-categorical-exclusion-determination Download CX-007993: Categorical Exclusion Determination Hatwai 230-Kilovolt Substation Breaker Replacement CX(s) Applied: B4.6 Date: 02/09/2012 Location(s): Idaho Offices(s): Bonneville Power Administration http://energy.gov/nepa/downloads/cx-007993-categorical-exclusion-determination Download CX-008013: Categorical Exclusion Determination

480

Application experience and field performance of silvered polymer reflectors  

DOE Green Energy (OSTI)

The solar-weighted hemispheric reflectance of unweathered silvered acrylic mirrors exceeds 92%, and specular reflectance into a 4- milliradian, full-cone acceptance angle is greater than 90%. Comparison of outdoor and accelerated tests suggests that the protected silver can resist corrosion for the five-year life that is the current goal. An installation of parabolic troughs has been cleaned monthly for two years, and reflectance is regularly returned to within a few percent of the initial reflectance values. In the presence of moisture, the silver/acrylic bond can delaminate to form a maze of tunnels and destroy specular reflectance. Proper edge preparation and protection delay the initiation of tunnels. 6 refs.

Schissel, P.; Jorgensen, G.; Pitts, R.

1991-04-01T23:59:59.000Z