National Library of Energy BETA

Sample records for reflect current law

  1. POLICY GUIDANCE MEMORANDUM #07 Current Appropriations Law and...

    Broader source: Energy.gov (indexed) [DOE]

    Due to recent changes in appropriations law, the Department no longer has the authority to ... POLICY GUIDANCE MEMORANDUM 07 Current Appropriations Law and Compensation of Foreign ...

  2. POLICY GUIDANCE MEMORANDUM #07 Current Appropriations Law and Compensation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Foreign Nationals | Department of Energy 7 Current Appropriations Law and Compensation of Foreign Nationals POLICY GUIDANCE MEMORANDUM #07 Current Appropriations Law and Compensation of Foreign Nationals Due to recent changes in appropriations law, the Department no longer has the authority to compensate a noncitizen, unless the noncitizen is lawfully admitted for permanent residence, or falls within one of a few very narrow exceptions based on the individuals profession. POLICY GUIDANCE

  3. Scaling law for direct current field emission-driven microscale gas breakdown

    SciTech Connect (OSTI)

    Venkattraman, A.; Alexeenko, A. A.

    2012-12-15

    The effects of field emission on direct current breakdown in microscale gaps filled with an ambient neutral gas are studied numerically and analytically. Fundamental numerical experiments using the particle-in-cell/Monte Carlo collisions method are used to systematically quantify microscale ionization and space-charge enhancement of field emission. The numerical experiments are then used to validate a scaling law for the modified Paschen curve that bridges field emission-driven breakdown with the macroscale Paschen law. Analytical expressions are derived for the increase in cathode electric field, total steady state current density, and the ion-enhancement coefficient including a new breakdown criterion. It also includes the effect of all key parameters such as pressure, operating gas, and field-enhancement factor providing a better predictive capability than existing microscale breakdown models. The field-enhancement factor is shown to be the most sensitive parameter with its increase leading to a significant drop in the threshold breakdown electric field and also to a gradual merging with the Paschen law. The proposed scaling law is also shown to agree well with two independent sets of experimental data for microscale breakdown in air. The ability to accurately describe not just the breakdown voltage but the entire pre-breakdown process for given operating conditions makes the proposed model a suitable candidate for the design and analysis of electrostatic microscale devices.

  4. Axial magnetic field and toroidally streaming fast ions in the dense plasma focus are natural consequences of conservation laws in the curved axisymmetric geometry of the current sheath

    SciTech Connect (OSTI)

    Auluck, S. K. H.

    2014-10-15

    Direct measurement of axial magnetic field in the PF-1000 dense plasma focus (DPF), and its reported correlation with neutron emission, call for a fresh look at previous reports of existence of axial magnetic field component in the DPF from other laboratories, and associated data suggesting toroidal directionality of fast ions participating in fusion reactions, with a view to understand the underlying physics. In this context, recent work dealing with application of the hyperbolic conservation law formalism to the DPF is extended in this paper to a curvilinear coordinate system, which reflects the shape of the DPF current sheath. Locally unidirectional shock propagation in this coordinate system enables construction of a system of 7 one-dimensional hyperbolic conservation law equations with geometric source terms, taking into account all the components of magnetic field and flow velocity. Rankine-Hugoniot jump conditions for this system lead to expressions for the axial magnetic field and three components of fluid velocity having high ion kinetic energy.

  5. The breaks and the hidden components in the power-law spectra of synchrotron radiation of the self-consistent current structures

    SciTech Connect (OSTI)

    Kocharovsky, V. V.; Kocharovsky, VI. V.; Tarasov, S. V.; Martyanov, V. Ju.

    2015-08-15

    Widespread use of a broken-power-law description of the spectra of synchrotron emission of various plasma objects requires an analysis of origin and a proper interpretation of spectral components. We show that, for a self-consistent magnetic configuration in a collisionless plasma, these components may be angle-dependent according to an anisotropic particle momentum distribution and may have no counterparts in a particle energy distribution. That has never been studied analytically and is in contrast to a usual model of synchrotron radiation, assuming an external magnetic field and a particle ensemble with isotropic momentum distribution. We demonstrate that for the wide intervals of observation angle the power-law spectra and, in particular, the positions and number of spectral breaks may be essentially different for the cases of the self-consistent and not-self-consistent magnetic fields in current structures responsible for the synchrotron radiation of the ensembles of relativistic particles with the multi-power-law energy distributions.

  6. Current:

    Office of Legacy Management (LM)

    Qwner contacted n yes Current: ---------------------L---- if yes, date contacted Research & Development cl Facility Type 0 . Productioff 0 Di 3pcsal /Storage TYPE OF CONTRACT ---------------- q Prime q Subcontractor 0 Purchase Order 0 Other information (i.e. q cast + fixed fee, unit piice, time & material, etr) ------- ------_-----_--------------- 0 Production scale testing 0 Pilot Scale 0 Bench Scale Process a Theoretical Studies Sample & Analysis rcc t O' L~1 q Manufacturing 0

  7. Current:

    Office of Legacy Management (LM)

    OWNE3 (55) -------- past: _--_-------------------- Current: Owner contacted I-J yes ,Fqna; ------------_------------- if yes, date contacted TYPE OF OPEF(ATION ---__-------_____ c] Research & Development -4 Facility Type ci Production scale testing 0 Pilbt Scale 0 Bench Scale Process 0 Theoretical Studies 0 Sample & Analysis C Productian E Disposal/Storage TYPE OF CONTRACi _------_-------_ tlanuf acturi ng University Research Organizaticn q Prime --. _' cl Other information (i.e., cost

  8. Current

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Dollars in Thousands) FY 2014 Current FY 2015 Enacted FY 2016 Request Enhanced Geothermal Systems (EGS) 27,100 32,100 45,000 Hydrothermal 10,300 12,500 36,500 Low Temperature and Coproduced 4,700 6,000 9,000 Systems Analysis 3,700 3,900 5,000 NREL Sitewide 0 500 500 Total, Geothermal Technologies 45,800 55,000 96,000 The Geothermal Technologies Office (GTO) accelerates deployment of clean, domestic geothermal energy by supporting innovative technologies that reduce the cost and risks of

  9. Renewable liquid reflection grating

    DOE Patents [OSTI]

    Ryutov, Dmitri D.; Toor, Arthur

    2003-10-07

    A renewable liquid reflection grating. Electrodes are operatively connected to a conducting liquid in an arrangement that produces a reflection grating and driven by a current with a resonance frequency. In another embodiment, the electrodes create the grating by a resonant electrostatic force acting on a dielectric liquid.

  10. REFLECT HOME

    Broader source: Energy.gov [DOE]

    Sacramento is nicknamed the City of Trees, so it made sense for the California State University, Sacramento, team to showcase nature in its Solar Decathlon 2015 project. The team’s Reflect Home does just that by embracing the city’s sense of expansive greenery.

  11. Obeying Environmental Laws

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Stewardship Environmental Protection Obeying Environmental Laws Obeying Environmental Laws LANL complies with more than 30 state and federal regulations and policies to...

  12. Water, law, science

    SciTech Connect (OSTI)

    Narasimhan, T.N.

    2007-10-17

    In a world with water resources severely impacted bytechnology, science must actively contribute to water law. To this end,this paper is an earth scientist s attempt to comprehend essentialelements of water law, and to examine their connections to science.Science and law share a common logical framework of starting with apriori prescribed tenets, and drawing consistent inferences. In science,observationally established physical laws constitute the tenets, while inlaw, they stem from social values. The foundations of modern water law inEurope and the New World were formulated nearly two thousand years ago byRoman jurists who were inspired by Greek philosophy of reason.Recognizing that vital natural elements such as water, air, and the seawere governed by immutable natural laws, they reasoned that theseelements belonged to all humans, and therefore cannot be owned as privateproperty. Legally, such public property was to be governed by jusgentium, the law of all people or the law of all nations. In contrast,jus civile or civil law governed private property. Remarkably, jusgentium continues to be relevant in our contemporary society in whichscience plays a pivotal role in exploiting vital resources common to all.This paper examines the historical roots of modern water law, followstheir evolution through the centuries, and examines how the spirit ofscience inherent in jus gentium is profoundly influencing evolving waterand environmental laws in Europe, the United States and elsewhere. In atechnological world, scientific knowledge has to lie at the core of waterlaw. Yet, science cannot formulate law. It is hoped that a philosophicalunderstanding of the relationships between science and law willcontribute to their constructively coming together in the service ofsociety.

  13. International resources law

    SciTech Connect (OSTI)

    Not Available

    1991-01-01

    This book covers: Historical origins of civil code legal systems; Modern civil law practice for mineral lawyers; Treaties and agreements for protection of international investments; Europe 1992-toward a single energy market; Dispute resolution in international agreements; Assessment of political risk; Reducing political risk; Protecting mineral investments from upheaval in developing countries; Typical world petroleum arrangements; government take in the Pacific Rim - Papua New Guinea; Mineral base of the USSR and prospects of investment; International taxation for the mining practitioner; Tax considerations - branch versus subsidiary; Doing business in the host country - nontax considerations; Impact of host-country laws on operations and profits; Mineral development and native rights - New Zealand; Designing the investment vehicle: mining; International oil and gas joint ventures; Selected U.S. laws with extraterritorial effect; U.S. tax and securities laws applied to foreign joint venturers; and Extraterritorial effect of U.S. laws.

  14. Scintillator reflective layer coextrusion

    DOE Patents [OSTI]

    Yun, Jae-Chul; Para, Adam

    2001-01-01

    A polymeric scintillator has a reflective layer adhered to the exterior surface thereof. The reflective layer comprises a reflective pigment and an adhesive binder. The adhesive binder includes polymeric material from which the scintillator is formed. A method of forming the polymeric scintillator having a reflective layer adhered to the exterior surface thereof is also provided. The method includes the steps of (a) extruding an inner core member from a first amount of polymeric scintillator material, and (b) coextruding an outer reflective layer on the exterior surface of the inner core member. The outer reflective layer comprises a reflective pigment and a second amount of the polymeric scintillator material.

  15. Anomalous law of cooling

    SciTech Connect (OSTI)

    Lapas, Luciano C.; Ferreira, Rogelma M. S.; Rubí, J. Miguel; Oliveira, Fernando A.

    2015-03-14

    We analyze the temperature relaxation phenomena of systems in contact with a thermal reservoir that undergoes a non-Markovian diffusion process. From a generalized Langevin equation, we show that the temperature is governed by a law of cooling of the Newton’s law type in which the relaxation time depends on the velocity autocorrelation and is then characterized by the memory function. The analysis of the temperature decay reveals the existence of an anomalous cooling in which the temperature may oscillate. Despite this anomalous behavior, we show that the variation of entropy remains always positive in accordance with the second law of thermodynamics.

  16. Neutron reflecting supermirror structure

    DOE Patents [OSTI]

    Wood, James L.

    1992-01-01

    An improved neutron reflecting supermirror structure comprising a plurality of stacked sets of bilayers of neutron reflecting materials. The improved neutron reflecting supermirror structure is adapted to provide extremely good performance at high incidence angles, i.e. up to four time the critical angle of standard neutron mirror structures. The reflection of neutrons striking the supermirror structure at a high critical angle provides enhanced neutron throughput, and hence more efficient and economical use of neutron sources.

  17. Neutron reflecting supermirror structure

    DOE Patents [OSTI]

    Wood, J.L.

    1992-12-01

    An improved neutron reflecting supermirror structure comprising a plurality of stacked sets of bilayers of neutron reflecting materials. The improved neutron reflecting supermirror structure is adapted to provide extremely good performance at high incidence angles, i.e. up to four time the critical angle of standard neutron mirror structures. The reflection of neutrons striking the supermirror structure at a high critical angle provides enhanced neutron throughput, and hence more efficient and economical use of neutron sources. 2 figs.

  18. AntiReflection Coating D

    SciTech Connect (OSTI)

    AIKEN,DANIEL J.

    1999-09-23

    Analytical expressions used to optimize AR coatings for single junction solar cells are extended for use in monolithic, series interconnected multi-junction solar cell AR coating design. The result is an analytical expression which relates the solar cell performance (through J{sub sc}) directly to the AR coating design through the device reflectance. It is also illustrated how AR coating design be used to provide an additional degree of freedom for current matching multi-junction devices.

  19. Photovoltaic module with light reflecting backskin

    DOE Patents [OSTI]

    Gonsiorawski, Ronald C.

    2007-07-03

    A photovoltaic module comprises electrically interconnected and mutually spaced photovoltaic cells that are encapsulated by a light-transmitting encapsulant between a light-transparent front cover and a back cover, with the back cover sheet being an ionomer/nylon alloy embossed with V-shaped grooves running in at least two directions and coated with a light reflecting medium so as to provide light-reflecting facets that are aligned with the spaces between adjacent cells and oriented so as to reflect light falling in those spaces back toward said transparent front cover for further internal reflection onto the solar cells, whereby substantially all of the reflected light will be internally reflected from said cover sheet back to the photovoltaic cells, thereby increasing the current output of the module. The internal reflector improves power output by as much as 67%.

  20. Tandem resonator reflectance modulator

    DOE Patents [OSTI]

    Fritz, I.J.; Wendt, J.R.

    1994-09-06

    A wide band optical modulator is grown on a substrate as tandem Fabry-Perot resonators including three mirrors spaced by two cavities. The absorption of one cavity is changed relative to the absorption of the other cavity by an applied electric field, to cause a change in total reflected light, as light reflecting from the outer mirrors is in phase and light reflecting from the inner mirror is out of phase with light from the outer mirrors. 8 figs.

  1. Tandem resonator reflectance modulator

    DOE Patents [OSTI]

    Fritz, Ian J. (Albuquerque, NM); Wendt, Joel R. (Albuquerque, NM)

    1994-01-01

    A wide band optical modulator is grown on a substrate as tandem Fabry-Perot resonators including three mirrors spaced by two cavities. The absorption of one cavity is changed relative to the absorption of the other cavity by an applied electric field, to cause a change in total reflected light, as light reflecting from the outer mirrors is in phase and light reflecting from the inner mirror is out of phase with light from the outer mirrors.

  2. Reflective diffraction grating

    DOE Patents [OSTI]

    Lamartine, Bruce C.

    2003-06-24

    Reflective diffraction grating. A focused ion beam (FIB) micromilling apparatus is used to store color images in a durable medium by milling away portions of the surface of the medium to produce a reflective diffraction grating with blazed pits. The images are retrieved by exposing the surface of the grating to polychromatic light from a particular incident bearing and observing the light reflected by the surface from specified reception bearing.

  3. Neutron reflecting supermirror structure

    DOE Patents [OSTI]

    Wood, James L.

    1992-01-01

    An improved neutron reflecting supermirror structure comprising a plurality of stacked sets of bilayers of neutron reflecting materials. The improved neutron reflecting supermirror structure is adapted to provide extremely good performance at high incidence angles, i.e. up to four time the critical angle of standard neutron mirror structures. The reflection of neutrons striking the supermirror structure at a high critical angle provides enhanced neutron throughput, and hence more efficient and economical use of neutron sources. One layer of each set of bilayers consist of titanium, and the second layer of each set of bilayers consist of an alloy of nickel with carbon interstitially present in the nickel alloy.

  4. Forensic imaging tools for law enforcement

    SciTech Connect (OSTI)

    SMITHPETER,COLIN L.; SANDISON,DAVID R.; VARGO,TIMOTHY D.

    2000-01-01

    Conventional methods of gathering forensic evidence at crime scenes are encumbered by difficulties that limit local law enforcement efforts to apprehend offenders and bring them to justice. Working with a local law-enforcement agency, Sandia National Laboratories has developed a prototype multispectral imaging system that can speed up the investigative search task and provide additional and more accurate evidence. The system, called the Criminalistics Light-imaging Unit (CLU), has demonstrated the capabilities of locating fluorescing evidence at crime scenes under normal lighting conditions and of imaging other types of evidence, such as untreated fingerprints, by direct white-light reflectance. CLU employs state of the art technology that provides for viewing and recording of the entire search process on videotape. This report describes the work performed by Sandia to design, build, evaluate, and commercialize CLU.

  5. Technetium Retention During LAW Vitrification

    Office of Environmental Management (EM)

    (1% I) for LAWE7H (AN-102, high organics) * 18% Tc (22% I) for LAWE3 (AP-101, high K) * Sugar most effective organic reductant for Tc and I retention * 15-20% absolute increase...

  6. Public Law 104-134

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Public Law 104-134 Debt Collection Improvement Act of 1996 (Public Law 104-134) Updated April 30, 1999 The President has signed into law historic legislation having a major impact on the way the Federal Government makes payments and collects its debts. Within the Omnibus Consolidated Rescissions and Appropriations Act of 1996 (Public Law 104-134) is the Debt Collection Improvement Act of 1996. The legislation provides an excellent opportunity for the Federal Government to move toward its goal of

  7. Surface reflectance degradation by microbial communities

    SciTech Connect (OSTI)

    Cheng, Meng -Dawn; Allman, Steve L.; Graham, David E.; Cheng, Karen R.; Pfiffner, Susan Marie; Vishnivetskaya, Tatiana A.; Desjarlais, Andre Omer

    2015-11-05

    Building envelope, such as a roof, is the interface between a building structure and the environment. Understanding of the physics of microbial interactions with the building envelope is limited. In addition to the natural weathering, microorganisms and airborne particulate matter that attach to a cool roof tend to reduce the roof reflectance over time, compromising the energy efficiency advantages of the reflective coating designs. We applied microbial ecology analysis to identify the natural communities present on the exposed coatings and investigated the reduction kinetics of the surface reflectance upon the introduction of a defined mixture of both photoautotrophic and heterotrophic microorganisms representing the natural communities. The result are (1) reflectance degradation by microbial communities follows a first-order kinetic relationship and (2) more than 50% of degradation from the initial reflectance value can be caused by microbial species alone in much less time than 3 years required by the current standard ENERGY STAR® test methods.

  8. Surface reflectance degradation by microbial communities

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Cheng, Meng -Dawn; Allman, Steve L.; Graham, David E.; Cheng, Karen R.; Pfiffner, Susan Marie; Vishnivetskaya, Tatiana A.; Desjarlais, Andre Omer

    2015-11-05

    Building envelope, such as a roof, is the interface between a building structure and the environment. Understanding of the physics of microbial interactions with the building envelope is limited. In addition to the natural weathering, microorganisms and airborne particulate matter that attach to a cool roof tend to reduce the roof reflectance over time, compromising the energy efficiency advantages of the reflective coating designs. We applied microbial ecology analysis to identify the natural communities present on the exposed coatings and investigated the reduction kinetics of the surface reflectance upon the introduction of a defined mixture of both photoautotrophic and heterotrophicmore » microorganisms representing the natural communities. The result are (1) reflectance degradation by microbial communities follows a first-order kinetic relationship and (2) more than 50% of degradation from the initial reflectance value can be caused by microbial species alone in much less time than 3 years required by the current standard ENERGY STAR® test methods.« less

  9. Current sensor

    DOE Patents [OSTI]

    Yakymyshyn, Christopher Paul; Brubaker, Michael Allen; Yakymyshyn, Pamela Jane

    2007-01-16

    A current sensor is described that uses a plurality of magnetic field sensors positioned around a current carrying conductor. The sensor can be hinged to allow clamping to a conductor. The current sensor provides high measurement accuracy for both DC and AC currents, and is substantially immune to the effects of temperature, conductor position, nearby current carrying conductors and aging.

  10. EXTENDED SCHMIDT LAW: ROLE OF EXISTING STARS IN CURRENT STAR...

    Office of Scientific and Technical Information (OSTI)

    Country of Publication: United States Language: English Subject: 79 ASTROPHYSICS, COSMOLOGY AND ASTRONOMY; DENSITY; GALACTIC EVOLUTION; MASS; STARS; SURFACES EVOLUTION; PHYSICAL ...

  11. 40th Indian Law Conference

    Broader source: Energy.gov [DOE]

    The Federal Bar Association is hosting the 40th Annual Indian Law Conference. This two-day conference focuses on the significant changes that have occurred in the relationship between Tribal Nations and the United States in the last four decades. The conference will cover several topics, including climate change, Indian Law, tribal courts, and more.

  12. Bidirectional Reflection Distribution Functions from surface bump maps

    SciTech Connect (OSTI)

    Cabral, B.K.

    1988-06-17

    The interaction of light and matter define what we see. This interaction can be characterized by a function which relates incoming light to the distribution of outgoing or reflected light. The Bidirectional Reflection Distribution Function (BRDF) is just such a function. Computer graphics scientists attempting to model this function have made simplifying assumptions about the reflecting surfaces. These simpler models have produced adequate results but only handle very uniform or isotropic surface characteristics. Reality on the other hand is filled with a variety of surface textures which result in a variety of BRDFs. This thesis broadens the class of BRDFs which can be used in computer graphics to render objects more realistically. It presents two enhancements to previous work done by the author. First, it describes a method for the approximation of surface absorption of light through the use of a computed geometric attentuation factor. This factor is computed by calculating the parts of the surface which are visible in the incident and reflecting directions. Specifically, it describes the algorithms and theory behind the visibility calculations and how it affects the reflection properties of the surface. Second, it describes a method for computing Fresnel's Law for conducting and dielectric surface materials and how Fresnel's Law affects surface reflectivity. This work also presents a method for rendering objects using the computed BRDFs. 38 refs., 29 figs., 2 tabs.

  13. Reflective optical imaging system

    DOE Patents [OSTI]

    Shafer, David R.

    2000-01-01

    An optical system compatible with short wavelength (extreme ultraviolet) radiation comprising four reflective elements for projecting a mask image onto a substrate. The four optical elements are characterized in order from object to image as convex, concave, convex and concave mirrors. The optical system is particularly suited for step and scan lithography methods. The invention increases the slit dimensions associated with ringfield scanning optics, improves wafer throughput and allows higher semiconductor device density.

  14. reflecting-behavioral-processes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Reflecting Behavioral Processes In Integrated Models Of Activity-Travel Demand And Dynamic Network Supply: A Novel Event-Based Framework Presentation at Argonne TRACC March 16, 2012 10:00 AM(CDT) TRACC Conference Room: Building 222, Room D-233 Dr. Karthik Charan Konduri School of Sustainable Energy and the Built Environment Arizona State University Abstract The developments in the microsimulation modeling of two key components of the transportation system, namely, activity-travel demand and

  15. Health and Safety Laws | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Health and Safety Laws Health and Safety Laws Health and safety laws require working conditions that do not pose a risk of serious harm: Occupational Safety and Health Act of 1970 ...

  16. Wind Access and Permitting Law

    Broader source: Energy.gov [DOE]

    The law also defines a limited set of reasonable restrictions that governments and associations are permitted to use in regulating residential wind energy systems. Any limitations put in place may...

  17. Renewable Energy Easements & Rights Laws

    Broader source: Energy.gov [DOE]

    Florida law also allows for the creation of easements for the purpose of maintaining exposure of a solar energy system to sunlight. Easements must be created in writing, and recorded and indexed ...

  18. Renewable liquid reflecting zone plate

    DOE Patents [OSTI]

    Toor, Arthur; Ryutov, Dmitri D.

    2003-12-09

    A renewable liquid reflecting zone plate. Electrodes are operatively connected to a dielectric liquid in a circular or other arrangement to produce a reflecting zone plate. A system for renewing the liquid uses a penetrable substrate.

  19. EEO is the Law Poster Supplement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    EEO is the Law" Poster Supplement Employers Holding Federal Contracts or Subcontracts ... Mandatory Supplement to EEOC PE-1(Revised 1109) "EEO is the Law" Poster. If you believe ...

  20. Distortion of power law blinking with binning and thresholding

    SciTech Connect (OSTI)

    Amecke, Nicole; Heber, André; Cichos, Frank

    2014-03-21

    Fluorescence intermittency is a random switching between emitting (on) and non-emitting (off) periods found for many single chromophores such as semiconductor quantum dots and organic molecules. The statistics of the duration of on- and off-periods are commonly determined by thresholding the emission time trace of a single chromophore and appear to be power law distributed. Here we test with the help of simulations if the experimentally determined power law distributions can actually reflect the underlying statistics. We find that with the experimentally limited time resolution real power law statistics with exponents α{sub on/off} ≳ 1.6, especially if α{sub on} ≠ α{sub off} would not be observed as such in the experimental data after binning and thresholding. Instead, a power law appearance could simply be obtained from the continuous distribution of intermediate intensity levels. This challenges much of the obtained data and the models describing the so-called power law blinking.

  1. Securities Law Issues Relating to Community Solar Projects

    Office of Energy Efficiency and Renewable Energy (EERE)

    The law firm Stoel Rives has analyzed the issues related to Securities Law and Community Solar both in the context of Washington state law and federal law.

  2. Current Titles

    SciTech Connect (OSTI)

    Various

    2006-06-01

    This booklet is published for those interested in current research being conducted at the National Center for Electron Microscopy. The NCEM is a DOE-designated national user facility and is available at no charge to qualified researchers. Access is controlled by an external steering committee. Interested researchers may contact Jane Cavlina, Administrator, at 510/486-6036.

  3. Exports and the antitrust laws: problems and solutions

    SciTech Connect (OSTI)

    Almstedt, K.W.

    1981-11-01

    Currently pending in Congress is the Export Trading Company Act of 1981 that would clarify precisely when American businesses operating overseas are subject to American antitrust laws. The Act encourages business cooperation to increase exports. The mining industry, coal in particular, is on the verge of an export boom and can be a primary beneficiary. 26 refs.

  4. Law Seminar International Tribal Economic Development and Sovereignty

    Broader source: Energy.gov [DOE]

    Law Seminars International is hosting a two-day conference to give an overview of the current legislative developments, Supreme Court cases, and new opportunities for tribal advancement. Attendees will hear about tribal resource development in the Arctic and tribal energy challenges.

  5. Current Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Current Research The U.S. Department of Transportation (USDOT) has established its only high-performance computing and engineering analysis research facility at Argonne National Laboratory to provide applications support in key areas of applied research and development for the USDOT community. The Transportation Research and Analysis Computing Center (TRACC) features a state-of-the-art massively parallel computer system, advanced scientific visualization capability, high-speed network

  6. Current Contracts

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Current Contracts U.S. Department of Energy Carlsbad Field Office Management & Operating Contractor for the Waste Isolation Pilot Plant Contract Number DE-EM0001971 Fee Payment Information (Nuclear Waste Partnership, LLC.) U.S. Department of Energy Carlsbad Field Office Transportation Contractors for the Waste Isolation Pilot Plant Contract Number DE-EM0001840 (Visionary Solutions, LLC) Contract Number DE-EM0001819 (CAST Specialty Transportation Services, Inc.) U.S. Department of Energy

  7. Force As A Momentum Current

    SciTech Connect (OSTI)

    Munera, Hector A.

    2010-07-28

    Advantages of a neo-Cartesian approach to classical mechanics are noted. If conservation of linear momentum is the fundamental principle, Newton's three laws become theorems. A minor paradox in static Newtonian mechanics is identified, and solved by reinterpreting force as a current of momentum. Contact force plays the role of a mere midwife in the exchange of momentum; however, force cannot be eliminated from physics because it provides the numerical value for momentum current. In this sense, in a neo-Cartesian formulation of mechanics the concept of force becomes strengthened rather than weakened.

  8. Soliton propagation, reflection, and transmission in an inhomogeneous plasma with trapped electrons

    SciTech Connect (OSTI)

    Aziz, Farah; Malik, Hitendra K.; Stroth, Ulrich

    2011-04-15

    Transmission and reflection of solitons from a semitransparent grid in an inhomogeneous plasma in the presence of trapped electrons is studied analytically. Conditions are obtained for the obliqueness of the propagation and the drift velocity of ions for the soliton transmission and reflection. Also, a transmission-reflection conservation law is derived. The contribution of trapped electrons to the solitons' propagation and their reflection and transmission is examined through energy, amplitude, and width of the solitons, in addition to the effect of temperature and drift of the ions.

  9. Variable area light reflecting assembly

    DOE Patents [OSTI]

    Howard, T.C.

    1986-12-23

    Device is described for tracking daylight and projecting it into a building. The device tracks the sun and automatically adjusts both the orientation and area of the reflecting surface. The device may be mounted in either a wall or roof of a building. Additionally, multiple devices may be employed in a light shaft in a building, providing daylight to several different floors. The preferred embodiment employs a thin reflective film as the reflecting device. One edge of the reflective film is fixed, and the opposite end is attached to a spring-loaded take-up roller. As the sun moves across the sky, the take-up roller automatically adjusts the angle and surface area of the film. Additionally, louvers may be mounted at the light entrance to the device to reflect incoming daylight in an angle perpendicular to the device to provide maximum reflective capability when daylight enters the device at non-perpendicular angles. 9 figs.

  10. Variable area light reflecting assembly

    DOE Patents [OSTI]

    Howard, Thomas C.

    1986-01-01

    Device for tracking daylight and projecting it into a building. The device tracks the sun and automatically adjusts both the orientation and area of the reflecting surface. The device may be mounted in either a wall or roof of a building. Additionally, multiple devices may be employed in a light shaft in a building, providing daylight to several different floors. The preferred embodiment employs a thin reflective film as the reflecting device. One edge of the reflective film is fixed, and the opposite end is attached to a spring-loaded take-up roller. As the sun moves across the sky, the take-up roller automatically adjusts the angle and surface area of the film. Additionally, louvers may be mounted at the light entrance to the device to reflect incoming daylight in an angle perpendicular to the device to provide maximum reflective capability when daylight enters the device at non-perpendicular angles.

  11. REFLECT HOME | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    so it made sense for the California State University, Sacramento, team to showcase nature in its Solar Decathlon 2015 project. The team's Reflect Home does just that by...

  12. Reflection Survey | Open Energy Information

    Open Energy Info (EERE)

    (Gritto, Et Al.) Rye Patch Area Integrated Seismic Studies At The Rye Patch Geothermal Reservoir, Nevada Reflection Survey At Rye Patch Area (Laney, 2005) Rye Patch Area Federal...

  13. Filament velocity scaling laws for warm ions

    SciTech Connect (OSTI)

    Manz, P.; Max-Planck-Institut fr Plasmaphysik, EURATOM Assoziation, Boltzmannstr. 2, 85748 Garching ; Carralero, D.; Birkenmeier, G.; Mller, H. W.; Scott, B. D.; Mller, S. H.; Fuchert, G.; Stroth, U.; Physik-Department E28, Technische Universitt Mnchen, James-Franck-Str. 1, 85748 Garching

    2013-10-15

    The dynamics of filaments or blobs in the scrape-off layer of magnetic fusion devices are studied by magnitude estimates of a comprehensive drift-interchange-Alfvn fluid model. The standard blob models are reproduced in the cold ion case. Even though usually neglected, in the scrape-off layer, the ion temperature can exceed the electron temperature by an order of magnitude. The ion pressure affects the dynamics of filaments amongst others by adding up to the interchange drive and the polarisation current. It is shown how both effects modify the scaling laws for filament velocity in dependence of its size. Simplifications for experimentally relevant limit regimes are given. These are the sheath dissipation, collisional, and electromagnetic regime.

  14. Law of Conservation of Muons

    DOE R&D Accomplishments [OSTI]

    Feinberg, G.; Weinberg, S.

    1961-02-01

    A multiplicative selection rule for mu meson-electron transitions is proposed. A "muon parity" = -1 is considered for the muon and its neutrino, while the "muon parity" for all other particles is +1. The selection rule then states that (-1) exp(no. of initial (-1) parity particles) = (-1) exp(no. of final (-1) parity particles). Several reactions that are forbidden by an additive law but allowed by the multiplicative law are suggested; these reactions include mu{sup +} .> e{sup +} + nu{sub mu} + {ovr nu}{sub e}, e{sup -} + e{sup -} .> mu{sup -} + mu{sup -}, and muonium .> antimuonium (mu{sup +} + e{sup -} .> mu{sup -} + e{sup +}). An intermediate-boson hypothesis is suggested. (T.F.H.)

  15. Current Schedule of Experiments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    current schedule of experiments Current Schedule of Experiments Current Schedule of Experiments - Updated 4/2016

  16. The Law of Water | Open Energy Information

    Open Energy Info (EERE)

    Law of Water Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- Secondary Legal SourceSecondary Legal Source: The Law of WaterLegal Abstract Basic...

  17. More Data, More Science ... Moore's Law

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    More Data, More Science ... Moore's Law February 4, 2014 David Skinner. NERSC Downloads Data-Skinner-NUG2014.pdf | Adobe Acrobat PDF file More Data, More Science and... Moore's Law ...

  18. NAC 484 - Traffic Laws | Open Energy Information

    Open Energy Info (EERE)

    RegulationRegulation: NAC 484 - Traffic LawsLegal Abstract These regulations set forth the traffic laws in the State of Nevada. Published NA Year Signed or Took Effect 2014...

  19. General Counsel Law Library | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    IS UNDER CONSTRUCTION... Contact us with any questions: Law Librarian (202) 586-4849 Law.Library@hq.doe.gov Legislative History Librarian 202-586-2886 Careers & Internships Sign Up...

  20. Observation of magnon-mediated current drag in Pt/yttrium iron...

    Office of Scientific and Technical Information (OSTI)

    threshold and follows the power-law T with n ranging from ... pure spin current generation and detection are ... magnetized after rapid thermal annealing between 800 and ...

  1. Environmental Laws and Regulations | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Record Files Natural Resource Damage Assessments Environmental Laws and Regulations More Documents & Publications Paducah Public Involvement Plan Portsmouth Removal Actions...

  2. Current to Current | Open Energy Information

    Open Energy Info (EERE)

    Current Jump to: navigation, search Name: Current to Current Address: 35 Corporate Dr Place: Burlington Zip: 1803 Region: United States Sector: Marine and Hydrokinetic Phone...

  3. Multi-megampere current interruption from explosive deformation of conductors

    SciTech Connect (OSTI)

    Goforth, J.H.; Williams, A.H.; Marsh, S.P.

    1985-01-01

    Two approaches for using explosives to interrupt current flowing in solid conductors are described. One concept uses explosives to extrude the switch conductor into thin regions that fuse due to current in the switch. A preliminary scaling law is presented. The second approach employs dielectric jets to sever current carrying conductors. A feasibility experiment and an improved design are described.

  4. Baseline LAW Glass Formulation Testing

    SciTech Connect (OSTI)

    Kruger, Albert A.; Mooers, Cavin; Bazemore, Gina; Pegg, Ian L.; Hight, Kenneth; Lai, Shan Tao; Buechele, Andrew; Rielley, Elizabeth; Gan, Hao; Muller, Isabelle S.; Cecil, Richard

    2013-06-13

    The major objective of the baseline glass formulation work was to develop and select glass formulations that are compliant with contractual and processing requirements for each of the LAW waste streams. Other objectives of the work included preparation and characterization of glasses with respect to the properties of interest, optimization of sulfate loading in the glasses, evaluation of ability to achieve waste loading limits, testing to demonstrate compatibility of glass melts with melter materials of construction, development of glass formulations to support ILAW qualification activities, and identification of glass formulation issues with respect to contract specifications and processing requirements.

  5. Generalised relativistic Ohm's laws, extended gauge transformations, and magnetic linking

    SciTech Connect (OSTI)

    Pegoraro, F.

    2015-11-15

    Generalisations of the relativistic ideal Ohm's law are presented that include specific dynamical features of the current carrying particles in a plasma. Cases of interest for space and laboratory plasmas are identified where these generalisations allow for the definition of generalised electromagnetic fields that transform under a Lorentz boost in the same way as the real electromagnetic fields and that obey the same set of homogeneous Maxwell's equations.

  6. Low reflectance radio frequency load

    DOE Patents [OSTI]

    Ives, R. Lawrence; Mizuhara, Yosuke M

    2014-04-01

    A load for traveling microwave energy has an absorptive volume defined by cylindrical body enclosed by a first end cap and a second end cap. The first end cap has an aperture for the passage of an input waveguide with a rotating part that is coupled to a reflective mirror. The inner surfaces of the absorptive volume consist of a resistive material or are coated with a coating which absorbs a fraction of incident RF energy, and the remainder of the RF energy reflects. The angle of the reflector and end caps is selected such that reflected RF energy dissipates an increasing percentage of the remaining RF energy at each reflection, and the reflected RF energy which returns to the rotating mirror is directed to the back surface of the rotating reflector, and is not coupled to the input waveguide. Additionally, the reflector may have a surface which generates a more uniform power distribution function axially and laterally, to increase the power handling capability of the RF load. The input waveguide may be corrugated for HE11 mode input energy.

  7. Reflective coherent spatial light modulator

    DOE Patents [OSTI]

    Simpson, John T.; Richards, Roger K.; Hutchinson, Donald P.; Simpson, Marcus L.

    2003-04-22

    A reflective coherent spatial light modulator (RCSLM) includes a subwavelength resonant grating structure (SWS), the SWS including at least one subwavelength resonant grating layer (SWL) have a plurality of areas defining a plurality of pixels. Each pixel represents an area capable of individual control of its reflective response. A structure for modulating the resonant reflective response of at least one pixel is provided. The structure for modulating can include at least one electro-optic layer in optical contact with the SWS. The RCSLM is scalable in both pixel size and wavelength. A method for forming a RCSLM includes the steps of selecting a waveguide material and forming a SWS in the waveguide material, the SWS formed from at least one SWL, the SWL having a plurality of areas defining a plurality of pixels.

  8. Reflected beam illumination microscopy using a microfluidics...

    Office of Scientific and Technical Information (OSTI)

    Reflected beam illumination microscopy using a microfluidics device - progress report 6152014. Citation Details In-Document Search Title: Reflected beam illumination microscopy ...

  9. Laws DOE Administers | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Laws DOE Administers Laws DOE Administers The Department of Energy's (DOE) overarching mission is to advance the national, economic, and energy security of the United States; to promote scientific and technological innovation in support of that mission; and to ensure the environmental cleanup of the national nuclear weapons complex. Laws passed by Congress and signed by the President both define DOE's authorities and set forth DOE's responsibilities. Additionally, a number of Executive Orders

  10. Laws & Legal Resources | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Library Books | Credit: GC Photographer Daniel Zazueta Library Books | Credit: GC Photographer Daniel Zazueta Looking for... Online Legal Resources Laws DOE Administers Guidance &...

  11. The Snell law for quaternionic potentials

    SciTech Connect (OSTI)

    De Leo, Stefano; Ducati, Gisele C.

    2013-12-15

    By using the analogy between optics and quantum mechanics, we obtain the Snell law for the planar motion of quantum particles in the presence of quaternionic potentials.

  12. Foundation for International Environmental Law and Development...

    Open Energy Info (EERE)

    long term. We help community groups, advise NGOs, and train government officials in international negotiations. Research on international law, policy and national practice...

  13. Solar Easements & Local Option Solar Rights Laws

    Broader source: Energy.gov [DOE]

    Utah's solar easement provision is similar to easement provisions in many other states. Parties may voluntarily enter into written solar easement contracts that are enforceable by law. An...

  14. Federal Highway Admininstration - Law Enforcement Escort - Best...

    Open Energy Info (EERE)

    Admininstration - Law Enforcement Escort - Best Practices Guidelines Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - Guide...

  15. Tribal Energy and Environmental Information Clearinghouse - Laws...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Web Site: Tribal Energy and Environmental Information Clearinghouse - Laws and Regulations Applicable to Geothermal Energy...

  16. Superconducting fault current controller/current controller

    DOE Patents [OSTI]

    Cha, Yung S.

    2004-06-15

    A superconducting fault current controller/current controller employs a superconducting-shielded core reactor (SSCR) with a variable impedance in a secondary circuit to control current in a primary circuit such as an electrical distribution system. In a second embodiment, a variable current source is employed in a secondary circuit of an SSCR to control current in the primary circuit. In a third embodiment, both a variable impedance in one secondary circuit and a variable current source in a second circuit of an SSCR are employed for separate and independent control of current in the primary circuit.

  17. Cumulus Clouds and Reflected Sunlight

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cumulus Clouds and Reflected Sunlight from Landsat ETM+ G. Wen and L. Oreopoulos National Aeronautics and Space Administration Goddard Space Flight Center University of Maryland Baltimore County Joint Center of Earth System Technology Greenbelt, Maryland R. F. Cahalan and S. C. Tsay National Aeronautics and Space Administration Goddard Space Flight Center Greenbelt, Maryland Introduction Cumulus clouds attenuate solar radiation casting shows on the ground. Cumulus clouds can also enhance solar

  18. Reduction of Glass Surface Reflectance by Ion Beam Surface Modification

    SciTech Connect (OSTI)

    Mark Spitzer

    2011-03-11

    This is the final report for DOE contract DE-EE0000590. The purpose of this work was to determine the feasibility of the reduction of the reflection from the front of solar photovoltaic modules. Reflection accounts for a power loss of approximately 4%. A solar module having an area of one square meter with an energy conversion efficiency of 18% generates approximately 180 watts. If reflection loss can be eliminated, the power output can be increased to 187 watts. Since conventional thin-film anti-reflection coatings do not have sufficient environmental stability, we investigated the feasibility of ion beam modification of the glass surface to obtain reduction of reflectance. Our findings are generally applicable to all solar modules that use glass encapsulation, as well as commercial float glass used in windows and other applications. Ion implantation of argon, fluorine, and xenon into commercial low-iron soda lime float glass, standard float glass, and borosilicate glass was studied by implantation, annealing, and measurement of reflectance. The three ions all affected reflectance. The most significant change was obtained by argon implantation into both low-iron and standard soda-lime glass. In this way samples were formed with reflectance lower than can be obtained with a single-layer coatings of magnesium fluoride. Integrated reflectance was reduced from 4% to 1% in low-iron soda lime glass typical of the glass used in solar modules. The reduction of reflectance of borosilicate glass was not as large; however borosilicate glass is not typically used in flat plate solar modules. Unlike conventional semiconductor ion implantation doping, glass reflectance reduction was found to be tolerant to large variations in implant dose, meaning that the process does not require high dopant uniformity. Additionally, glass implantation does not require mass analysis. Simple, high current ion implantation equipment can be developed for this process; however, before the process

  19. Constraints on the tensor-to-scalar ratio for non-power-law models

    SciTech Connect (OSTI)

    Vázquez, J. Alberto; Bridges, M.; Ma, Yin-Zhe; Hobson, M.P. E-mail: mb435@mrao.cam.ac.uk E-mail: mph@mrao.cam.ac.uk

    2013-08-01

    Recent cosmological observations hint at a deviation from the simple power-law form of the primordial spectrum of curvature perturbations. In this paper we show that in the presence of a tensor component, a turn-over in the initial spectrum is preferred by current observations, and hence non-power-law models ought to be considered. For instance, for a power-law parameterisation with both a tensor component and running parameter, current data show a preference for a negative running at more than 2.5σ C.L. As a consequence of this deviation from a power-law, constraints on the tensor-to-scalar ratio r are slightly broader. We also present constraints on the inflationary parameters for a model-independent reconstruction and the Lasenby and Doran (LD) model. In particular, the constraints on the tensor-to-scalar ratio from the LD model are: r{sub LD} = 0.11±0.024. In addition to current data, we show expected constraints from Planck-like and CMB-Pol sensitivity experiments by using Markov-Chain-Monte-Carlo sampling chains. For all the models, we have included the Bayesian Evidence to perform a model selection analysis. The Bayes factor, using current observations, shows a strong preference for the LD model over the standard power-law parameterisation, and provides an insight into the accuracy of differentiating models through future surveys.

  20. Mirror: Visually reflecting C{sup ++}

    SciTech Connect (OSTI)

    Orosco, R.; Campo, M.; Sole, J.P.

    1995-12-31

    Reflection is the ability of a system to inspect and change a model of itself. This ability allows to transparently control and extend the functionality of an existing system without performing any changes to the system itself. In dynamic object-oriented languages like CLOS or Smalltalk. the reflective ability is supported directly by the language. In C++, in contrast, reflection must be provided by some form of code annotation and pre-processing. In most cases, this approach either requires modification of the system code, or just supports the reflection of entire classes but not the reflection of determined objects. This work presents the Mirror environment that supports C++ reflective programming through visual association of meta-classes to classes. It allows full transparent reflection of objects using three-dimensional presentations of the different architecture levels. The environment adds reflective ability to C++ classes without any code modification visible to the user, as well as dynamically selective reflection of objects.

  1. Commercial Current Promotions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Commercial Program Development Commercial Current Promotions Industrial Federal Agriculture This page features all current special promotions for commercial programs....

  2. Discharge lamp with reflective jacket

    DOE Patents [OSTI]

    MacLennan, Donald A.; Turner, Brian P.; Kipling, Kent

    2001-01-01

    A discharge lamp includes an envelope, a fill which emits light when excited disposed in the envelope, a source of excitation power coupled to the fill to excite the fill and cause the fill to emit light, and a reflector disposed around the envelope and defining an opening, the reflector being configured to reflect some of the light emitted by the fill back into the fill while allowing some light to exit through the opening. The reflector may be made from a material having a similar thermal index of expansion as compared to the envelope and which is closely spaced to the envelope. The envelope material may be quartz and the reflector material may be either silica or alumina. The reflector may be formed as a jacket having a rigid structure which does not adhere to the envelope. The lamp may further include an optical clement spaced from the envelope and configured to reflect an unwanted component of light which exited the envelope back into the envelope through the opening in the reflector. Light which can be beneficially recaptured includes selected wavelength regions, a selected polarization, and selected angular components.

  3. Public Law 102-392 for Printing | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2-392 for Printing Public Law 102-392 for Printing Public Law 102-392 for Printing Public Law 102-392 for Printing (118.61 KB) More Documents & Publications Minutes from the Print ...

  4. A law intern's proving ground | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A law intern's proving ... A law intern's proving ground Posted: May 7, 2014 - 5:31pm | Y-12 Report | Volume 10, Issue 2 | 2014 Eliza Scott almost didn't apply for the Y-12UT Law ...

  5. Framework Topic Briefing: Direct Feed LAW

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    February 13, 2014 Framework Topic Briefing: Direct Feed LAW Next steps: Put Dick's handouts on SharePoint * Continue Framework topic briefing series Page 1 System Plan 7 Next ...

  6. Solar Easements & Rights Laws | Department of Energy

    Office of Environmental Management (EM)

    Program Info Sector Name State State Maryland Program Type SolarWind Access Policy Summary Maryland has a long-standing law protecting the rights of solar energy system owners. ...

  7. Solar Easements & Rights Laws | Department of Energy

    Office of Environmental Management (EM)

    Rather, the law allows parties to enter into solar easement contracts voluntarily for the purpose of ensuring adequate exposure of a solar-energy system. In April 2009, Washington ...

  8. Alternative Fuels Data Center: Federal Laws and Incentives

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Center: Federal Laws and Incentives to someone by E-mail Share Alternative Fuels Data Center: Federal Laws and Incentives on Facebook Tweet about Alternative Fuels Data Center: Federal Laws and Incentives on Twitter Bookmark Alternative Fuels Data Center: Federal Laws and Incentives on Google Bookmark Alternative Fuels Data Center: Federal Laws and Incentives on Delicious Rank Alternative Fuels Data Center: Federal Laws and Incentives on Digg Find More places to share Alternative Fuels Data

  9. Alternative Fuels Data Center: CNG Powers Law Enforcement in Arkansas

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    CNG Powers Law Enforcement in Arkansas to someone by E-mail Share Alternative Fuels Data Center: CNG Powers Law Enforcement in Arkansas on Facebook Tweet about Alternative Fuels Data Center: CNG Powers Law Enforcement in Arkansas on Twitter Bookmark Alternative Fuels Data Center: CNG Powers Law Enforcement in Arkansas on Google Bookmark Alternative Fuels Data Center: CNG Powers Law Enforcement in Arkansas on Delicious Rank Alternative Fuels Data Center: CNG Powers Law Enforcement in Arkansas on

  10. Scaling laws in magnetized plasma turbulence

    SciTech Connect (OSTI)

    Boldyrev, Stanislav

    2015-06-28

    Interactions of plasma motion with magnetic fields occur in nature and in the laboratory in an impressively broad range of scales, from megaparsecs in astrophysical systems to centimeters in fusion devices. The fact that such an enormous array of phenomena can be effectively studied lies in the existence of fundamental scaling laws in plasma turbulence, which allow one to scale the results of analytic and numerical modeling to the sized of galaxies, velocities of supernovae explosions, or magnetic fields in fusion devices. Magnetohydrodynamics (MHD) provides the simplest framework for describing magnetic plasma turbulence. Recently, a number of new features of MHD turbulence have been discovered and an impressive array of thought-provoking phenomenological theories have been put forward. However, these theories have conflicting predictions, and the currently available numerical simulations are not able to resolve the contradictions. MHD turbulence exhibits a variety of regimes unusual in regular hydrodynamic turbulence. Depending on the strength of the guide magnetic field it can be dominated by weakly interacting Alfv\\'en waves or strongly interacting wave packets. At small scales such turbulence is locally anisotropic and imbalanced (cross-helical). In a stark contrast with hydrodynamic turbulence, which tends to ``forget'' global constrains and become uniform and isotropic at small scales, MHD turbulence becomes progressively more anisotropic and unbalanced at small scales. Magnetic field plays a fundamental role in turbulent dynamics. Even when such a field is not imposed by external sources, it is self-consistently generated by the magnetic dynamo action. This project aims at a comprehensive study of universal regimes of magnetic plasma turbulence, combining the modern analytic approaches with the state of the art numerical simulations. The proposed study focuses on the three topics: weak MHD turbulence, which is relevant for laboratory devices, the solar

  11. Current to Current Corporation | Open Energy Information

    Open Energy Info (EERE)

    Zip: 1803 Sector: Ocean Product: Developing a technology which generates power from ocean currents : Submersible Power Generators (SPG). Coordinates: 44.446275,...

  12. AARP, National Consumer Law Center, and Public Citizen Comments...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AARP, National Consumer Law Center, and Public Citizen Comments to:DEPARTMENT OF ENERGY Smart Grid RFI: Addressing Policy and Logistical Challenges AARP, National Consumer Law...

  13. TEEIC Laws and Regulations Applicable to Energy Transmission...

    Open Energy Info (EERE)

    TEEIC Laws and Regulations Applicable to Energy Transmission Development Website Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: TEEIC Laws and...

  14. Nevada Lawyer Magazine: Overview of Water Law in Nevada | Open...

    Open Energy Info (EERE)

    in Nevada Internet. Nevada. cited 20141111. Available from: http:nvbar.orgarticlescontentoverview-water-law-nevada Related Files NevLawyer Sept 2009 Water Law...

  15. UNEP Handbook for Drafting Laws on Energy Efficiency and Renewable...

    Open Energy Info (EERE)

    Handbook for Drafting Laws on Energy Efficiency and Renewable Energy Resources Jump to: navigation, search Tool Summary LAUNCH TOOL Name: UNEP Handbook for Drafting Laws on Energy...

  16. Montana Streamside Management Zone Law Webpage | Open Energy...

    Open Energy Info (EERE)

    Zone Law Webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Montana Streamside Management Zone Law Webpage Abstract Provides information on...

  17. June 24 Webinar Will Discuss How Environmental Laws and Regulations...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Will Discuss How Environmental Laws and Regulations Affect Tribal Energy Projects June 24 Webinar Will Discuss How Environmental Laws and Regulations Affect Tribal Energy...

  18. Renewable Energy Terms of Reference: Laws, Policies and Regulations...

    Open Energy Info (EERE)

    Laws, Policies and Regulations Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Renewable Energy Terms of Reference: Laws, Policies and Regulations AgencyCompany...

  19. Scaling Law of Coherent Synchrotron Radiation in a Rectangular...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Scaling Law of Coherent Synchrotron Radiation in a Rectangular Chamber Citation Details In-Document Search Title: Scaling Law of Coherent Synchrotron Radiation in...

  20. Environmental Law Institute Webinar to Promote Superior Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Environmental Law Institute Webinar to Promote Superior Energy Performance(tm) on July 22, 2014 Environmental Law Institute Webinar to Promote Superior Energy Performance(tm) on ...

  1. AARP, National Consumer Law Center, and Public Citizen Comments...

    Office of Environmental Management (EM)

    AARP, National Consumer Law Center, and Public Citizen Comments to:DEPARTMENT OF ENERGY Smart Grid RFI: Addressing Policy and Logistical Challenges AARP, National Consumer Law ...

  2. Oregon Federal and State Historic Preservation Laws Webpage ...

    Open Energy Info (EERE)

    Laws Webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Oregon Federal and State Historic Preservation Laws Webpage Abstract Provides...

  3. Solar, Wind, and Energy Efficiency Easements and Rights Laws...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solar, Wind, and Energy Efficiency Easements and Rights Laws Solar, Wind, and Energy Efficiency Easements and Rights Laws < Back Eligibility Residential Savings Category Solar -...

  4. Environmental Law and Policy Center | Open Energy Information

    Open Energy Info (EERE)

    Law and Policy Center Jump to: navigation, search Name: Environmental Law and Policy Center Place: Chicago, Illinois Zip: 60601 Product: Public interest environmental advocacy...

  5. NGL Downlight Demonstration Project: Alston & Bird, LLP, Law...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    NGL Downlight Demonstration Project: Alston & Bird, LLP, Law Offices NGL Downlight Demonstration Project: Alston & Bird, LLP, Law Offices As of 2012, the U.S. Department of Energy ...

  6. Copyright Laws for the Web | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Federal Requirements Copyright Laws for the Web Copyright Laws for the Web Before you can use copyrighted material on an Office of Energy Efficiency and Renewable Energy (EERE) ...

  7. Method and apparatus for inspecting reflection masks for defects

    DOE Patents [OSTI]

    Bokor, Jeffrey; Lin, Yun

    2003-04-29

    An at-wavelength system for extreme ultraviolet lithography mask blank defect detection is provided. When a focused beam of wavelength 13 nm is incident on a defective region of a mask blank, three possible phenomena can occur. The defect will induce an intensity reduction in the specularly reflected beam, scatter incoming photons into an off-specular direction, and change the amplitude and phase of the electric field at the surface which can be monitored through the change in the photoemission current. The magnitude of these changes will depend on the incident beam size, and the nature, extent and size of the defect. Inspection of the mask blank is performed by scanning the mask blank with 13 nm light focused to a spot a few .mu.m in diameter, while measuring the reflected beam intensity (bright field detection), the scattered beam intensity (dark-field detection) and/or the change in the photoemission current.

  8. Condenser optic with sacrificial reflective surface

    DOE Patents [OSTI]

    Tichenor, Daniel A.; Kubiak, Glenn D.; Lee, Sung Hun

    2007-07-03

    Employing collector optics that has a sacrificial reflective surface can significantly prolong the useful life of the collector optics and the overall performance of the condenser in which the collector optics are incorporated. The collector optics is normally subject to erosion by debris from laser plasma source of radiation. The presence of an upper sacrificial reflective surface over the underlying reflective surface effectively increases the life of the optics while relaxing the constraints on the radiation source. Spatial and temporally varying reflectivity that results from the use of the sacrificial reflective surface can be accommodated by proper condenser design.

  9. Condenser optic with sacrificial reflective surface

    DOE Patents [OSTI]

    Tichenor, Daniel A.; Kubiak, Glenn D.; Lee, Sang Hun

    2006-07-25

    Employing collector optics that have a sacrificial reflective surface can significantly prolong the useful life of the collector optics and the overall performance of the condenser in which the collector optics are incorporated. The collector optics are normally subject to erosion by debris from laser plasma source of radiation. The presence of an upper sacrificial reflective surface over the underlying reflective surface effectively increases the life of the optics while relaxing the constraints on the radiation source. Spatial and temporally varying reflectivity that results from the use of the sacrificial reflective surface can be accommodated by proper condenser design.

  10. Current measuring system

    DOE Patents [OSTI]

    Dahl, David A.; Appelhans, Anthony D.; Olson, John E.

    1997-01-01

    A current measuring system comprising a current measuring device having a first electrode at ground potential, and a second electrode; a current source having an offset potential of at least three hundred volts, the current source having an output electrode; and a capacitor having a first electrode electrically connected to the output electrode of the current source and having a second electrode electrically connected to the second electrode of the current measuring device.

  11. Current measuring system

    DOE Patents [OSTI]

    Dahl, D.A.; Appelhans, A.D.; Olson, J.E.

    1997-09-09

    A current measuring system is disclosed comprising a current measuring device having a first electrode at ground potential, and a second electrode; a current source having an offset potential of at least three hundred volts, the current source having an output electrode; and a capacitor having a first electrode electrically connected to the output electrode of the current source and having a second electrode electrically connected to the second electrode of the current measuring device. 4 figs.

  12. Current Power Rates

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    links Financial Information Financial Public Processes Asset Management Cost Verification Process Rate Cases Rate Information Current Power Rates Current Transmission Rates...

  13. Current Transmission Rates

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    links Financial Information Financial Public Processes Asset Management Cost Verification Process Rate Cases Rate Information Current Power Rates Current Transmission Rates...

  14. Current measurement apparatus

    DOE Patents [OSTI]

    Umans, Stephen D.

    2008-11-11

    Apparatus and methods are provided for a system for measurement of a current in a conductor such that the conductor current may be momentarily directed to a current measurement element in order to maintain proper current without significantly increasing an amount of power dissipation attributable to the current measurement element or adding resistance to assist in current measurement. The apparatus and methods described herein are useful in superconducting circuits where it is necessary to monitor current carried by the superconducting elements while minimizing the effects of power dissipation attributable to the current measurement element.

  15. Cosmological Ohm's law and dynamics of non-minimal electromagnetism

    SciTech Connect (OSTI)

    Hollenstein, Lukas; Jain, Rajeev Kumar; Urban, Federico R. E-mail: jain@cp3.dias.sdu.dk

    2013-01-01

    The origin of large-scale magnetic fields in cosmic structures and the intergalactic medium is still poorly understood. We explore the effects of non-minimal couplings of electromagnetism on the cosmological evolution of currents and magnetic fields. In this context, we revisit the mildly non-linear plasma dynamics around recombination that are known to generate weak magnetic fields. We use the covariant approach to obtain a fully general and non-linear evolution equation for the plasma currents and derive a generalised Ohm law valid on large scales as well as in the presence of non-minimal couplings to cosmological (pseudo-)scalar fields. Due to the sizeable conductivity of the plasma and the stringent observational bounds on such couplings, we conclude that modifications of the standard (adiabatic) evolution of magnetic fields are severely limited in these scenarios. Even at scales well beyond a Mpc, any departure from flux freezing behaviour is inhibited.

  16. Corporate Board By-Laws | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Corporate Board By-Laws Corporate Board By-Laws This document contains the by-laws of the EM QA Corporate Board. By-Laws Office of Environmental Management Quality Assurance Corporate Board (25.42 KB) More Documents & Publications ORSSAB Bylaws QA Corporate Board Meeting - March 2008 QA Corporate Board Meeting - August 2009

  17. Working with SRNL - Our Facilities - Law Enforcement Support Center -

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Southeast Region Law Enforcement Support Center - Southeast Region Working with SRNL Our Facilities - Law Enforcement Support Center - Southeast Region The Law Enforcement Support Center at SRNL features specialized equipment and technical expertise to help local and regional law enforcement agencies gather and analyze evidence

  18. Quarterly Research Performance Progress Report (2015 Q3). Ultrasonic Phased Arrays and Interactive Reflectivity Tomography for Nondestructive Inspection of Injection and Production Wells in Geothermal Energy Systems

    SciTech Connect (OSTI)

    Santos-Villalobos, Hector J; Polsky, Yarom; Kisner, Roger A; Johnson, Christi R; Collins, Case; Bouman, Charles; Abdulrahman, Hani; Foster, Benjamin

    2015-09-01

    For the past quarter, we have placed our effort in implementing the first version of the ModelBased Iterative Reconstruction (MBIR) algorithm, assembling and testing the electronics, designing transducers mounts, and defining our laboratory test samples. We have successfully developed the first implementation of MBIR for ultrasound imaging. The current algorithm was tested with synthetic data and we are currently making new modifications for the reconstruction of real ultrasound data. Beside assembling and testing the electronics, we developed a LabView graphic user interface (GUI) to fully control the ultrasonic phased array, adjust the time-delays of the transducers, and store the measured reflections. As part of preparing for a laboratory-scale demonstration, the design and fabrication of the laboratory samples has begun. Three cement blocks with embedded objects will be fabricated, characterized, and used to demonstrate the capabilities of the system. During the next quarter, we will continue to improve the current MBIR forward model and integrate the reconstruction code with the LabView GUI. In addition, we will define focal laws for the ultrasonic phased array and perform the laboratory demonstration. We expect to perform laboratory demonstration by the end of October 2015.

  19. Federal Energy Management Laws and Requirements | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Federal Energy Management Laws and Requirements Federal Energy Management Laws and Requirements Federal Energy Management Laws and Requirements To help agencies comply with federal laws and requirements, the Federal Energy Management Program (FEMP) analyzes energy management mandates from legal authorities and publishes notices and rules related to federal energy management. FEMP also provides tools to help agencies report annual facility and fleet progress toward federal laws and requirements.

  20. Alternative Fuels Data Center: Hydrogen Laws and Incentives

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Hydrogen Printable Version Share this resource Send a link to Alternative Fuels Data Center: Hydrogen Laws and Incentives to someone by E-mail Share Alternative Fuels Data Center: Hydrogen Laws and Incentives on Facebook Tweet about Alternative Fuels Data Center: Hydrogen Laws and Incentives on Twitter Bookmark Alternative Fuels Data Center: Hydrogen Laws and Incentives on Google Bookmark Alternative Fuels Data Center: Hydrogen Laws and Incentives on Delicious Rank Alternative Fuels Data Center:

  1. Alternative Fuels Data Center: Federal Laws and Incentives for Biodiesel

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Biodiesel Printable Version Share this resource Send a link to Alternative Fuels Data Center: Federal Laws and Incentives for Biodiesel to someone by E-mail Share Alternative Fuels Data Center: Federal Laws and Incentives for Biodiesel on Facebook Tweet about Alternative Fuels Data Center: Federal Laws and Incentives for Biodiesel on Twitter Bookmark Alternative Fuels Data Center: Federal Laws and Incentives for Biodiesel on Google Bookmark Alternative Fuels Data Center: Federal Laws and

  2. Alternative Fuels Data Center: Federal Laws and Incentives for Electricity

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Electricity Printable Version Share this resource Send a link to Alternative Fuels Data Center: Federal Laws and Incentives for Electricity to someone by E-mail Share Alternative Fuels Data Center: Federal Laws and Incentives for Electricity on Facebook Tweet about Alternative Fuels Data Center: Federal Laws and Incentives for Electricity on Twitter Bookmark Alternative Fuels Data Center: Federal Laws and Incentives for Electricity on Google Bookmark Alternative Fuels Data Center: Federal Laws

  3. Alternative Fuels Data Center: Federal Laws and Incentives for Ethanol

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Ethanol Printable Version Share this resource Send a link to Alternative Fuels Data Center: Federal Laws and Incentives for Ethanol to someone by E-mail Share Alternative Fuels Data Center: Federal Laws and Incentives for Ethanol on Facebook Tweet about Alternative Fuels Data Center: Federal Laws and Incentives for Ethanol on Twitter Bookmark Alternative Fuels Data Center: Federal Laws and Incentives for Ethanol on Google Bookmark Alternative Fuels Data Center: Federal Laws and Incentives for

  4. Alternative Fuels Data Center: Federal Laws and Incentives for Hydrogen

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Hydrogen Printable Version Share this resource Send a link to Alternative Fuels Data Center: Federal Laws and Incentives for Hydrogen to someone by E-mail Share Alternative Fuels Data Center: Federal Laws and Incentives for Hydrogen on Facebook Tweet about Alternative Fuels Data Center: Federal Laws and Incentives for Hydrogen on Twitter Bookmark Alternative Fuels Data Center: Federal Laws and Incentives for Hydrogen on Google Bookmark Alternative Fuels Data Center: Federal Laws and Incentives

  5. Alternative Fuels Data Center: Federal Laws and Incentives for Propane

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Propane Printable Version Share this resource Send a link to Alternative Fuels Data Center: Federal Laws and Incentives for Propane to someone by E-mail Share Alternative Fuels Data Center: Federal Laws and Incentives for Propane on Facebook Tweet about Alternative Fuels Data Center: Federal Laws and Incentives for Propane on Twitter Bookmark Alternative Fuels Data Center: Federal Laws and Incentives for Propane on Google Bookmark Alternative Fuels Data Center: Federal Laws and Incentives for

  6. Federal Energy Management Laws and Requirements | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Laws and Requirements Federal Energy Management Laws and Requirements Federal Energy Management Laws and Requirements To help agencies comply with federal laws and requirements, the Federal Energy Management Program (FEMP) analyzes energy management mandates from legal authorities and publishes notices and rules related to federal energy management. FEMP also provides tools to help agencies report annual facility and fleet progress toward federal laws and requirements. Get Started Start meeting

  7. Reflected beam illumination microscopy using a microfluidics...

    Office of Scientific and Technical Information (OSTI)

    using a microfluidics device - progress report 6152014. Citation Details In-Document Search Title: Reflected beam illumination microscopy using a microfluidics device - ...

  8. Anomalous - viscosity current drive

    DOE Patents [OSTI]

    Stix, Thomas H.; Ono, Masayuki

    1988-01-01

    An apparatus and method for maintaining a steady-state current in a toroidal magnetically confined plasma. An electric current is generated in an edge region at or near the outermost good magnetic surface of the toroidal plasma. The edge current is generated in a direction parallel to the flow of current in the main plasma and such that its current density is greater than the average density of the main plasma current. The current flow in the edge region is maintained in a direction parallel to the main current for a period of one or two of its characteristic decay times. Current from the edge region will penetrate radially into the plasma and augment the main plasma current through the mechanism of anomalous viscosity. In another aspect of the invention, current flow driven between a cathode and an anode is used to establish a start-up plasma current. The plasma-current channel is magnetically detached from the electrodes, leaving a plasma magnetically insulated from contact with any material obstructions including the cathode and anode.

  9. QER- Comment of Western Environmental Law Center

    Office of Energy Efficiency and Renewable Energy (EERE)

    To whom it may concern, I provided the following comments at the public meeting in Santa Fe, NM on 8/11/14: My name is Thomas Singer, and I am a Senior Policy Advisor at the Western Environmental Law Center.

  10. Occupational safety and health law handbook

    SciTech Connect (OSTI)

    Sarvadi, D.G.; Keller; Heckman

    1999-09-01

    This book reviews the regulations and standards governing the protection of employees in the workplace and provides insight into dealing with pertinent regulations and regulatory authorities. Written for safety professionals, industrial hygienists, human resource professionals, attorneys, and students, this companion to Government Institutes' best-selling ``Environmental Law Handbook'' offers the legal fundamentals behind occupational safety and health laws in one concise and authoritative volume. In 19 chapters, the authoring law firm of Keller and Heckman cover the OSHAct and its development; OSHA, NIOSH, and OSHRC; the roles played by other regulatory agencies; the OSHA rulemaking process; OSHA Standards and the General Duty Clause; record keeping and reporting; employers' and employees' rights; inspections; violations, penalties, and how to contest them; criminal prosecutions; state plans; industry-specific issues; OSHA reform; and international regulations and standards. This book references approximately 400 seminal OSHA legal decisions from the approximately 1,300 cases on record and includes coverage of Canadian and European Community regulations, making it the first comprehensive global overview of occupational safety and health law.

  11. Diffusion Processes Satisfying a Conservation Law Constraint

    SciTech Connect (OSTI)

    Bakosi, J.; Ristorcelli, J. R.

    2014-03-04

    We investigate coupled stochastic differential equations governing N non-negative continuous random variables that satisfy a conservation principle. In various fields a conservation law requires that a set of fluctuating variables be non-negative and (if appropriately normalized) sum to one. As a result, any stochastic differential equation model to be realizable must not produce events outside of the allowed sample space. We develop a set of constraints on the drift and diffusion terms of such stochastic models to ensure that both the non-negativity and the unit-sum conservation law constraint are satisfied as the variables evolve in time. We investigate the consequences of the developed constraints on the Fokker-Planck equation, the associated system of stochastic differential equations, and the evolution equations of the first four moments of the probability density function. We show that random variables, satisfying a conservation law constraint, represented by stochastic diffusion processes, must have diffusion terms that are coupled and nonlinear. The set of constraints developed enables the development of statistical representations of fluctuating variables satisfying a conservation law. We exemplify the results with the bivariate beta process and the multivariate Wright-Fisher, Dirichlet, and Lochner’s generalized Dirichlet processes.

  12. Diffusion Processes Satisfying a Conservation Law Constraint

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Bakosi, J.; Ristorcelli, J. R.

    2014-03-04

    We investigate coupled stochastic differential equations governing N non-negative continuous random variables that satisfy a conservation principle. In various fields a conservation law requires that a set of fluctuating variables be non-negative and (if appropriately normalized) sum to one. As a result, any stochastic differential equation model to be realizable must not produce events outside of the allowed sample space. We develop a set of constraints on the drift and diffusion terms of such stochastic models to ensure that both the non-negativity and the unit-sum conservation law constraint are satisfied as the variables evolve in time. We investigate the consequencesmore » of the developed constraints on the Fokker-Planck equation, the associated system of stochastic differential equations, and the evolution equations of the first four moments of the probability density function. We show that random variables, satisfying a conservation law constraint, represented by stochastic diffusion processes, must have diffusion terms that are coupled and nonlinear. The set of constraints developed enables the development of statistical representations of fluctuating variables satisfying a conservation law. We exemplify the results with the bivariate beta process and the multivariate Wright-Fisher, Dirichlet, and Lochner’s generalized Dirichlet processes.« less

  13. About Direct Current

    Broader source: Energy.gov [DOE]

    Learn about Direct Current -- a podcast about the energy that lights our homes, powers our lives and shapes our world.

  14. Identification coding schemes for modulated reflectance systems

    DOE Patents [OSTI]

    Coates, Don M.; Briles, Scott D.; Neagley, Daniel L.; Platts, David; Clark, David D.

    2006-08-22

    An identifying coding apparatus employing modulated reflectance technology involving a base station emitting a RF signal, with a tag, located remotely from the base station, and containing at least one antenna and predetermined other passive circuit components, receiving the RF signal and reflecting back to the base station a modulated signal indicative of characteristics related to the tag.

  15. CIRCUITS FOR CURRENT MEASUREMENTS

    DOE Patents [OSTI]

    Cox, R.J.

    1958-11-01

    Circuits are presented for measurement of a logarithmic scale of current flowing in a high impedance. In one form of the invention the disclosed circuit is in combination with an ionization chamber to measure lonization current. The particular circuit arrangement lncludes a vacuum tube having at least one grid, an ionization chamber connected in series with a high voltage source and the grid of the vacuum tube, and a d-c amplifier feedback circuit. As the ionization chamber current passes between the grid and cathode of the tube, the feedback circuit acts to stabilize the anode current, and the feedback voltage is a measure of the logaritbm of the ionization current.

  16. Particle reflection and TFTR neutral beam diagnostics

    SciTech Connect (OSTI)

    Kamperschroer, J.H.; Grisham, L.R.; Kugel, H.W.; O`Connor, T.E.; Newman, R.A.; Stevenson, T.N.; von Halle, A.; Williams, M.D.

    1992-04-01

    Determination of two critical neutral beam parameters, power and divergence, are affected by the reflection of a fraction of the incident energy from the surface of the measuring calorimeter. On the TFTR Neutral Beam Test Stand, greater than 30% of the incident power directed at the target chamber calorimeter was unaccounted for. Most of this loss is believed due to reflection from the surface of the flat calorimeter, which was struck at a near grazing incidence (12{degrees}). Beamline calorimeters, of a ``V``-shape design, while retaining the beam power, also suffer from reflection effects. Reflection, in this latter case, artificially peaks the power toward the apex of the ``V``, complicating the fitting technique, and increasing the power density on axis by 10 to 20%; an effect of import to future beamline designers. Agreement is found between measured and expected divergence values, even with 24% of the incident energy reflected.

  17. Particle reflection and TFTR neutral beam diagnostics

    SciTech Connect (OSTI)

    Kamperschroer, J.H.; Grisham, L.R.; Kugel, H.W.; O'Connor, T.E.; Newman, R.A.; Stevenson, T.N.; von Halle, A.; Williams, M.D.

    1992-04-01

    Determination of two critical neutral beam parameters, power and divergence, are affected by the reflection of a fraction of the incident energy from the surface of the measuring calorimeter. On the TFTR Neutral Beam Test Stand, greater than 30% of the incident power directed at the target chamber calorimeter was unaccounted for. Most of this loss is believed due to reflection from the surface of the flat calorimeter, which was struck at a near grazing incidence (12{degrees}). Beamline calorimeters, of a V''-shape design, while retaining the beam power, also suffer from reflection effects. Reflection, in this latter case, artificially peaks the power toward the apex of the V'', complicating the fitting technique, and increasing the power density on axis by 10 to 20%; an effect of import to future beamline designers. Agreement is found between measured and expected divergence values, even with 24% of the incident energy reflected.

  18. Electric current locator

    DOE Patents [OSTI]

    King, Paul E.; Woodside, Charles Rigel

    2012-02-07

    The disclosure herein provides an apparatus for location of a quantity of current vectors in an electrical device, where the current vector has a known direction and a known relative magnitude to an input current supplied to the electrical device. Mathematical constants used in Biot-Savart superposition equations are determined for the electrical device, the orientation of the apparatus, and relative magnitude of the current vector and the input current, and the apparatus utilizes magnetic field sensors oriented to a sensing plane to provide current vector location based on the solution of the Biot-Savart superposition equations. Description of required orientations between the apparatus and the electrical device are disclosed and various methods of determining the mathematical constants are presented.

  19. Current Solicitations - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOE-RL Contracts/Procurements Current Solicitations DOE-RL Contracts/Procurements RL Contracts & Procurements Home Prime Contracts Current Solicitations Other Sources DOE RL Contracting Officers DOE RL Contracting Officer Representatives Current Solicitations Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size The Richland Operations Office uses Fedconnect (https://www.fedconnect.net) to post solicitations on FedBizOps. Quotes/proposals are also received using

  20. Glue Film Thickness Measurements by Spectral Reflectance

    SciTech Connect (OSTI)

    B. R. Marshall

    2010-09-20

    Spectral reflectance was used to determine the thickness of thin glue layers in a study of the effect of the glue on radiance and reflectance measurements of shocked-tin substrates attached to lithium fluoride windows. Measurements based on profilometry of the components were found to be inaccurate due to flatness variations and deformation of the tin substrate under pressure during the gluing process. The accuracy of the spectral reflectance measurements were estimated to be ±0.5 μm, which was sufficient to demonstrate a convincing correlation between glue thickness and shock-generated light.

  1. Fault Current Limiters

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Other benefits include: &17; Enhanced system safety, stability, and efficiency of the power ... large fault current desaturates the iron core of the series AC coils and the increased ...

  2. RF current sensor

    DOE Patents [OSTI]

    Moore, James A.; Sparks, Dennis O.

    1998-11-10

    An RF sensor having a novel current sensing probe and a voltage sensing probe to measure voltage and current. The current sensor is disposed in a transmission line to link all of the flux generated by the flowing current in order to obtain an accurate measurement. The voltage sensor is a flat plate which operates as a capacitive plate to sense voltage on a center conductor of the transmission line, in which the measured voltage is obtained across a resistance leg of a R-C differentiator circuit formed by the characteristic impedance of a connecting transmission line and a capacitance of the plate, which is positioned proximal to the center conductor.

  3. Current Annualized Request

    Office of Environmental Management (EM)

    Appropriation FY 2012 FY 2013 FY 2014 Current Annualized Request CR % Energy And Water Development, And Related Agencies Energy Programs Energy Efficiency and Renewable Energy...

  4. Current Testbed Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Current Testbed Research Previous Testbed Research Proposal Process Terms and Conditions Dark Fiber Testbed Federated Testbed Circuits Test Circuit Service Performance (perfSONAR)...

  5. File:CaveProtectionLaw.pdf | Open Energy Information

    Open Energy Info (EERE)

    CaveProtectionLaw.pdf Jump to: navigation, search File File history File usage Metadata File:CaveProtectionLaw.pdf Size of this preview: 463 599 pixels. Other resolution: 464 ...

  6. Montana Air Quality Program Laws & Rules Webpage | Open Energy...

    Open Energy Info (EERE)

    Air Quality Program Laws & Rules Webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Montana Air Quality Program Laws & Rules Webpage Abstract...

  7. Montana Understanding the Basics of Water Law In Montana Webpage...

    Open Energy Info (EERE)

    Understanding the Basics of Water Law In Montana Webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Montana Understanding the Basics of Water Law...

  8. This report is mandatory under Public Law 93 275

    U.S. Energy Information Administration (EIA) Indexed Site

    under the Federal Energy Administration Act of 1974 (Public Law 93-275). Failure to comply may result in criminal fines, civil penalties and other sanctions as provided by law. ...

  9. Summary - WTP Analytical Lab, BOF and LAW Waste Vitrification...

    Office of Environmental Management (EM)

    T es including an ces of Facilities y Waste (LAW assessment w ology elements es (LAB, BOF, ... F was to identify t s (CTEs) in the and LAW) and re to be incorpo normally requir 6. he ...

  10. An Introduction to Washington Water Law | Open Energy Information

    Open Energy Info (EERE)

    Introduction to Washington Water Law Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: An Introduction to Washington Water LawLegal...

  11. Bidirectional reflection functions from surface bump maps

    SciTech Connect (OSTI)

    Cabral, B.; Max, N.; Springmeyer, R.

    1987-04-29

    The Torrance-Sparrow model for calculating bidirectional reflection functions contains a geometrical attenuation factor to account for shadowing and occlusions in a hypothetical distribution of grooves on a rough surface. Using an efficient table-based method for determining the shadows and occlusions, we calculate the geometric attenuation factor for surfaces defined by a specific table of bump heights. Diffuse and glossy specular reflection of the environment can be handled in a unified manner by using an integral of the bidirectional reflection function times the environmental illumination, over the hemisphere of solid angle above a surface. We present a method of estimating the integral, by expanding the bidirectional reflection coefficient in spherical harmonics, and show how the coefficients in this expansion can be determined efficiently by reorganizing our geometric attenuation calculation.

  12. Lensless X-Ray Imaging in Reflection

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    X-Ray Imaging in Reflection Print The advent of x-ray free-electron laser (XFEL) light ... wavelengths relevant to atomic and molecular phenomena) with the advantages of ...

  13. Preparing reflective substrate surfaces for laser treatment

    DOE Patents [OSTI]

    Flick, F.F.

    1984-11-21

    A coating of either copper oxide or felt tip pen ink is used on reflective copper or gold substrates to enhance laser beam coupling when the substrates are cut or welded with a laser.

  14. Frustrated total internal reflection acoustic field sensor

    DOE Patents [OSTI]

    Kallman, Jeffrey S.

    2000-01-01

    A frustrated total internal reflection acoustic field sensor which allows the acquisition of the acoustic field over an entire plane, all at once. The sensor finds use in acoustic holography and acoustic diffraction tomography. For example, the sensor may be produced by a transparent plate with transparent support members tall enough to support one or more flexible membranes at an appropriate height for frustrated total internal reflection to occur. An acoustic wave causes the membrane to deflect away from its quiescent position and thus changes the amount of light that tunnels through the gap formed by the support members and into the membrane, and so changes the amount of light reflected by the membrane. The sensor(s) is illuminated by a uniform tight field, and the reflection from the sensor yields acoustic wave amplitude and phase information which can be picked up electronically or otherwise.

  15. Microsoft Word - Rapid Reflective Facet Characterization Using...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    losing power that misses the target, or increasing peak fluxes to undesirable levels. ... is positioned so that it views the reflection of an active target, such as an LCD screen. ...

  16. Ultracapacitor current collector

    DOE Patents [OSTI]

    Jerabek, Elihu Calfin (Glenmont, NY); Mikkor, Mati (Ann Arbor, MI)

    2001-10-16

    An ultracapacitor having two solid, nonporous current collectors, two porous electrodes separating the collectors, a porous separator between the electrodes and an electrolyte occupying the pores in the electrodes and separator. At least one of the current collectors comprises a conductive metal substrate coated with a metal nitride, carbide or boride coating.

  17. Current level detector

    DOE Patents [OSTI]

    Kerns, Cordon R.

    1977-01-01

    A device is provided for detecting the current level of a DC signal. It includes an even harmonic modulator to which a reference AC signal is applied. The unknown DC signal acts on the reference AC signal so that the output of the modulator includes an even harmonic whose amplitude is proportional to the unknown DC current.

  18. Lamp method and apparatus using multiple reflections

    DOE Patents [OSTI]

    MacLennan, Donald A.; Turner, Brian; Kipling, Kent

    1999-01-01

    A method wherein the light in a sulfur or selenium lamp is reflected through the fill a multiplicity of times to convert ultraviolet radiation to visible. A light emitting device comprised of an electrodeless envelope which bears a light reflecting covering around a first portion which does not crack due to differential thermal expansion and which has a second portion which comprises a light transmissive aperture.

  19. Lamp method and apparatus using multiple reflections

    DOE Patents [OSTI]

    MacLennan, D.A.; Turner, B.; Kipling, K.

    1999-05-11

    A method wherein the light in a sulfur or selenium lamp is reflected through the fill a multiplicity of times to convert ultraviolet radiation to visible is disclosed. A light emitting device comprised of an electrodeless envelope which bears a light reflecting covering around a first portion which does not crack due to differential thermal expansion and which has a second portion which comprises a light transmissive aperture. 20 figs.

  20. Superconducting current transducer

    SciTech Connect (OSTI)

    Kuchnir, M.; Ozelis, J.P. )

    1991-03-01

    This paper describes the construction and performance of an electric current meter that operates in liquid He and mechanically splits apart to permit replacement of the current carrying conductor. It permits the measurement of currents induced in a loop of superconducting cable and expeditious exchange of such loops. It is a key component for a short sample cable testing facility that requires no high current power supplies nor high current leads. Its superconducting pickup circuit involves a non-magnetic core toroidal split-coil that surrounds the conductor and a solenoid whose field is sensed by a Hall probe. This toroidal split-coil is potted inside another compensating toroidal split-coil.

  1. Voltage controlled current source

    DOE Patents [OSTI]

    Casne, Gregory M.

    1992-01-01

    A seven decade, voltage controlled current source is described for use in testing intermediate range nuclear instruments that covers the entire test current range of from 10 picoamperes to 100 microamperes. High accuracy is obtained throughout the entire seven decades of output current with circuitry that includes a coordinated switching scheme responsive to the input signal from a hybrid computer to control the input voltage to an antilog amplifier, and to selectively connect a resistance to the antilog amplifier output to provide a continuous output current source as a function of a preset range of input voltage. An operator controlled switch provides current adjustment for operation in either a real-time simulation test mode or a time response test mode.

  2. Reflection seismic mapping of an abandoned coal mine, Belleville, Illinois

    SciTech Connect (OSTI)

    Anderson, N.; Hinds, R.; Roark, M.

    1997-10-01

    Old mine location maps (1958 vintage) indicate that the northwestern part of an undeveloped property near the town of Belleville, St. Clair County, Illinois, is situated above an abandoned and now water-filled, room-and-pillar type coal mine. The central and southeast parts of the Belleville property are shown as overlying intact (non-mined) coal. The coal unit mined at the Belleville site, the Herrin No. 6 is Pennsylvanian in age and about 2.5 m thick at a depth of around 40 m. The current owners of the Belleville property want to construct a large building on the central and southeast parts of the site, but have been concerned about the accuracy of the old mine location maps because of recent mine-related surface subsidence in areas designated on the maps as not mined. To ensure that the proposed new development is located on structurally stable ground, a grid of ten high-resolution reflection seismic lines was acquired on-site. On these reflection seismic data, mined-out areas can be visually identified and differentiated from non-mined areas. The interpretation of the reflection seismic data was constrained and validated by 15 test boreholes. These seismic and borehole data confirm that the central and southeast parts of the property have not been mined extensively. Development of the Belleville site has proceeded with confidence.

  3. Origin of deep crustal reflections: Implications of coincident seismic refraction and reflection data in Nevada

    SciTech Connect (OSTI)

    Holbrook, W.S. (Woods Hole Oceanographic Institution, MA (USA)); Catchings, R.D. (U.S. Geological Survey, Menlo Park, CA (USA)); Jarchow, C.M. (Stanford Univ., CA (USA))

    1991-02-01

    The authors compare seismic refraction and reflection results along the PASSCAL/COCORP 40{degree}N transect in the northern Basin and Range of Nevada in order to determine the origin of the prominent reflections from the deep crystalline crust. Reflection data along the transect show a thick zone of discontinuous, subhorizontal reflections, beginning at 4-6 s two-way traveltime (10-20 km depth) and ending at 9-11 s (27-35 km). Two independently derived velocity models, based on refraction data, are largely similar and agree on many important aspects of the reflectivity-velocity relation. Both models show that the top of the reflective zone lies 3-8 km above a prominent mid-crustal velocity discontinuity, which is interpreted to separate bulk silicic from bulk dioritic-gabbroic crust; in most places, the silicic mid-crust is more strongly reflective than the mafic lower crust. This pattern is expected in areas where ductile shearing is the mechanism responsible for the reflectivity. One of the velocity models, however, suggests that, in places, the strongest reflectivity spans both the middle (6.1-6.3 km/s) and lower (6.6 km/s) crust; this pattern suggests that the combined influence of ductile strain fabrics and mafic intrusions gives rise to crustal reflections. Both models show that the lowermost crust and crust/mantle transition are highly reflective, also suggesting the presence of mafic and/or ultramafic intrusions. Thus the observed reflection patterns suggest that ductile shearing and the intrusion of mantle-derived magma - both of which are likely to have accompanied the extreme Cenozoic extension - are important factors in generating deep crustal reflections.

  4. Radiation induced leakage current and stress induced leakage current in ultra-thin gate oxides

    SciTech Connect (OSTI)

    Ceschia, M.; Paccagnella, A.; Cester, A.; Scarpa, A.; Ghidini, G.

    1998-12-01

    Low-field leakage current has been measured in thin oxides after exposure to ionizing radiation. This Radiation Induced Leakage Current (RILC) can be described as an inelastic tunneling process mediated by neutral traps in the oxide, with an energy loss of about 1 eV. The neutral trap distribution is influenced by the oxide field applied during irradiation, thus indicating that the precursors of the neutral defects are charged, likely being defects associated to trapped holes. The maximum leakage current is found under zero-field condition during irradiation, and it rapidly decreases as the field is enhanced, due to a displacement of the defect distribution across the oxide towards the cathodic interface. The RILC kinetics are linear with the cumulative dose, in contrast with the power law found on electrically stressed devices.

  5. Geothermal Energy: Current abstracts

    SciTech Connect (OSTI)

    Ringe, A.C.

    1988-02-01

    This bulletin announces the current worldwide information available on the technologies required for economic recovery of geothermal energy and its use as direct heat or for electric power production. (ACR)

  6. Current Financial Opportunities

    Broader source: Energy.gov [DOE]

    Current hydrogen-related funding opportunities through the U.S. Department of Energy's (DOE) Fuel Cell Technologies Office are listed below. The Fuel Cell Technologies Office offers opportunities for both financial and technical assistance.

  7. Current control circuitry

    DOE Patents [OSTI]

    Taubman, Matthew S.

    2005-03-15

    Among the embodiments of the present invention is an apparatus that includes a transistor (30), a servo device (40), and a current source (50). The servo device (40) is operable to provide a common base mode of operation of the transistor (30) by maintaining an approximately constant voltage level at the transistor base (32b). The current source (150) is operable to provide a bias current to the transistor (30). A first device (24) provides an input signal to an electrical node (70) positioned between the emitter (32e) of the transistor (30) and the current source (50). A second device (26) receives an output signal from the collector (32c) of the transistor (30).

  8. CURRENT TRANSFER SYSTEMS

    DOE Patents [OSTI]

    Watt, D.A.

    1956-07-01

    A current transfer system is described for transferring current between a rotating member and a co-axial stationary member. The particular area of application for the invention is in connection with homopolar generators where a low voltage and high current are generated. The current tramsfer system of the invention comprises a rotor member and a co-axial stator member wherein one of the members is shaped to provide a circumferential surface concave in section and the other member is shaped to have a peripheral portion in close proximity to the surface, whereby a liquid metal can be stably supported between the two members when they are moving relative to one another to establish an electrical conducting path between the members.

  9. Current Annualized Request

    Office of Environmental Management (EM)

    Organization FY 2012 FY 2013 FY 2014 Current Annualized Request CR % National Security Weapons Activities* 7,214,834 7,557,342 7,868,409 +311,067 +4.1% Defense Nuclear...

  10. High reflectance-low stress Mo-Si multilayer reflective coatings

    DOE Patents [OSTI]

    Montcalm, Claude; Mirkarimi, Paul B.

    2000-01-01

    A high reflectance-low stress Mo-Si multilayer reflective coating particularly useful for the extreme ultraviolet (EUV) wavelength region. While the multilayer reflective coating has particular application for EUV lithography, it has numerous other applications where high reflectance and low stress multilayer coatings are utilized. Multilayer coatings having high near-normal incidence reflectance (R.gtoreq.65%) and low residual stress (.ltoreq.100 MPa) have been produced using thermal and non-thermal approaches. The thermal approach involves heating the multilayer coating to a given temperature for a given time after deposition in order to induce structural changes in the multilayer coating that will have an overall "relaxation" effect without reducing the reflectance significantly.

  11. Process for fabricating high reflectance-low stress Mo--Si multilayer reflective coatings

    DOE Patents [OSTI]

    Montcalm, Claude; Mirkarimi, Paul B.

    2001-01-01

    A high reflectance-low stress Mo--Si multilayer reflective coating particularly useful for the extreme ultraviolet (EUV) wavelength region. While the multilayer reflective coating has particular application for EUV lithography, it has numerous other applications where high reflectance and low stress multilayer coatings are utilized. Multilayer coatings having high near-normal incidence reflectance (R.gtoreq.65%) and low residual stress (.ltoreq.100 MPa) have been produced using thermal and non-thermal approaches. The thermal approach involves heating the multilayer coating to a given temperature for a given time after deposition in order to induce structural changes in the multilayer coating that will have an overall "relaxation" effect without reducing the reflectance significantly.

  12. REFLECT: A computer program for the x-ray reflectivity of bent perfect crystals

    SciTech Connect (OSTI)

    Etelaeniemi, V.; Suortti, P.; Thomlinson, W. . Dept. of Physics; Brookhaven National Lab., Upton, NY )

    1989-09-01

    The design of monochromators for x-ray applications, using either standard laboratory sources on synchrotron radiation sources, requires a knowledge of the reflectivity of the crystals. The reflectivity depends on the crystals used, the geometry of the reflection, the energy range of the radiation, and, in the present case, the cylindrical bending radius of the optical device. This report is intended to allow the reader to become familiar with, and therefore use, a computer program called REFLECT which we have used in the design of a dual beam Laue monochromator for synchrotron angiography. The results of REFLECT have been compared to measured reflectivities for both bent Bragg and Laue geometries. The results are excellent and should give full confidence in the use of the program. 6 refs.

  13. Superconducting current transducer

    SciTech Connect (OSTI)

    Kuchnir, M.; Ozelis, J.P.

    1990-10-01

    The construction and performance of an electric current meter that operates in liquid He and mechanically splits apart to permit replacement of the current carrying conductor is described. It permits the measurement of currents induced in a loop of superconducting cable and expeditious exchange of such loops. It is a key component for a short sample cable testing facility that requires no high current power supplies nor high current leads. Its superconducting pickup circuit involves a non-magnetic core toroidal split-coil that surrounds the conductor and a solenoid whose field is sensed by a Hall probe. This toroidal split-coil is potted inside another compensating toroidal split-coil. The C shaped half toroids can be separated and brought precisely together from outside the cryostat. The Hall probe is energized and sensed by a lock-in amplifier whose output drives a bipolar power supply which feeds the compensating coil. The output is the voltage across a resistor in this feedback circuit. Currents of up to 10 kA can be measured with a precision of 150 mA. 3 refs., 4 figs.

  14. Beam current sensor

    DOE Patents [OSTI]

    Kuchnir, M.; Mills, F.E.

    1984-09-28

    A current sensor for measuring the dc component of a beam of charged particles employs a superconducting pick-up loop probe, with twisted superconducting leads in combination with a Superconducting Quantum Interference Device (SQUID) detector. The pick-up probe is in the form of a single-turn loop, or a cylindrical toroid, through which the beam is directed and within which a first magnetic flux is excluded by the Meisner effect. The SQUID detector acts as a flux-to-voltage converter in providing a current to the pick-up loop so as to establish a second magnetic flux within the electrode which nulls out the first magnetic flux. A feedback voltage within the SQUID detector represents the beam current of the particles which transit the pick-up loop. Meisner effect currents prevent changes in the magnetic field within the toroidal pick-up loop and produce a current signal independent of the beam's cross-section and its position within the toroid, while the combination of superconducting elements provides current measurement sensitivities in the nano-ampere range.

  15. Beam current sensor

    DOE Patents [OSTI]

    Kuchnir, Moyses; Mills, Frederick E.

    1987-01-01

    A current sensor for measuring the DC component of a beam of charged particles employs a superconducting pick-up loop probe, with twisted superconducting leads in combination with a Superconducting Quantum Interference Device (SQUID) detector. The pick-up probe is in the form of a single-turn loop, or a cylindrical toroid, through which the beam is directed and within which a first magnetic flux is excluded by the Meisner effect. The SQUID detector acts as a flux-to-voltage converter in providing a current to the pick-up loop so as to establish a second magnetic flux within the electrode which nulls out the first magnetic flux. A feedback voltage within the SQUID detector represents the beam current of the particles which transit the pick-up loop. Meisner effect currents prevent changes in the magnetic field within the toroidal pick-up loop and produce a current signal independent of the beam's cross-section and its position within the toroid, while the combination of superconducting elements provides current measurement sensitivites in the nano-ampere range.

  16. Fractional power-law spatial dispersion in electrodynamics

    SciTech Connect (OSTI)

    Tarasov, Vasily E.; Trujillo, Juan J.

    2013-07-15

    Electric fields in non-local media with power-law spatial dispersion are discussed. Equations involving a fractional Laplacian in the Riesz form that describe the electric fields in such non-local media are studied. The generalizations of Coulomb’s law and Debye’s screening for power-law non-local media are characterized. We consider simple models with anomalous behavior of plasma-like media with power-law spatial dispersions. The suggested fractional differential models for these plasma-like media are discussed to describe non-local properties of power-law type. -- Highlights: •Plasma-like non-local media with power-law spatial dispersion. •Fractional differential equations for electric fields in the media. •The generalizations of Coulomb’s law and Debye’s screening for the media.

  17. Adjustable direct current and pulsed circuit fault current limiter

    DOE Patents [OSTI]

    Boenig, Heinrich J.; Schillig, Josef B.

    2003-09-23

    A fault current limiting system for direct current circuits and for pulsed power circuit. In the circuits, a current source biases a diode that is in series with the circuits' transmission line. If fault current in a circuit exceeds current from the current source biasing the diode open, the diode will cease conducting and route the fault current through the current source and an inductor. This limits the rate of rise and the peak value of the fault current.

  18. Low reflectance high power RF load

    DOE Patents [OSTI]

    Ives, R. Lawrence; Mizuhara, Yosuke M.

    2016-02-02

    A load for traveling microwave energy has an absorptive volume defined by cylindrical body enclosed by a first end cap and a second end cap. The first end cap has an aperture for the passage of an input waveguide with a rotating part that is coupled to a reflective mirror. The inner surfaces of the absorptive volume consist of a resistive material or are coated with a coating which absorbs a fraction of incident RF energy, and the remainder of the RF energy reflects. The angle of the reflector and end caps is selected such that reflected RF energy dissipates an increasing percentage of the remaining RF energy at each reflection, and the reflected RF energy which returns to the rotating mirror is directed to the back surface of the rotating reflector, and is not coupled to the input waveguide. Additionally, the reflector may have a surface which generates a more uniform power distribution function axially and laterally, to increase the power handling capability of the RF load. The input waveguide may be corrugated for HE11 mode input energy.

  19. Pigments which reflect infrared radiation from fire

    DOE Patents [OSTI]

    Berdahl, Paul H.

    1998-01-01

    Conventional paints transmit or absorb most of the intense infrared (IR) radiation emitted by fire, causing them to contribute to the spread of fire. The present invention comprises a fire retardant paint additive that reflects the thermal IR radiation emitted by fire in the 1 to 20 micrometer (.mu.m) wavelength range. The important spectral ranges for fire control are typically about 1 to about 8 .mu.m or, for cool smoky fires, about 2 .mu.m to about 16 .mu.m. The improved inventive coatings reflect adverse electromagnetic energy and slow the spread of fire. Specific IR reflective pigments include titanium dioxide (rutile) and red iron oxide pigments with diameters of about 1 .mu.m to about 2 .mu.m and thin leafing aluminum flake pigments.

  20. Pigments which reflect infrared radiation from fire

    DOE Patents [OSTI]

    Berdahl, P.H.

    1998-09-22

    Conventional paints transmit or absorb most of the intense infrared (IR) radiation emitted by fire, causing them to contribute to the spread of fire. The present invention comprises a fire retardant paint additive that reflects the thermal IR radiation emitted by fire in the 1 to 20 micrometer ({micro}m) wavelength range. The important spectral ranges for fire control are typically about 1 to about 8 {micro}m or, for cool smoky fires, about 2 {micro}m to about 16 {micro}m. The improved inventive coatings reflect adverse electromagnetic energy and slow the spread of fire. Specific IR reflective pigments include titanium dioxide (rutile) and red iron oxide pigments with diameters of about 1 {micro}m to about 2 {micro}m and thin leafing aluminum flake pigments. 4 figs.

  1. Method of making reflecting film reflector

    DOE Patents [OSTI]

    Cottingham, James G.

    1980-01-01

    A reflector of the reflecting film type is disclosed and which may be used in a heliostatic system for concentrating solar energy and comprising a reflecting film bonded to an appropriate rigid substrate in such a way that specularity of a very high order is achieved. A method of bonding the reflecting film to the substrate is also disclosed and comprises the steps of initially adhering the film to a smooth, clean flat rigid surface with a non-bonding liquid between the rigid surface and film, and then bonding the substrate and film. The non-bonding liquid has a molecular adhesion greater than any stresses due to handling or curing of the bonding agent which is applied between the film and the opposing surface of the rigid substrate.

  2. Mutual inductance current transducer

    SciTech Connect (OSTI)

    Hemminger, R.C.

    1989-12-12

    This patent describes a mutual inductance differential current transducer for producing an analog voltage output signal in response to, and having a level varying linearly with respect to, and having a level varying linearly with respect to, the magnitude and rate of change of a flow of current supplied by an alternating current power line distribution system. It comprises: an elongated current conductor having first and second ends and a substantially straight axial portion therebetween of a predetermined length and defining a central axis; a generally cylindrical sleeve of conductive material of substantially the predetermined length, received coaxially over the elongated current conductor in the straight axial portion thereof and electrically insulated therefrom; a toroidal sensor coil defining a central axis and having an axial length less than approximately one-third the length of the generally cylindrical sleeve and an internal diameter substantially the same as the outer diameter of the cylindrical sleeve and sufficient to position the coil coaxially on the cylindrical sleeve. The coil being positioned coaxially thereon and generally centrally of the length thereof.

  3. Reflection technique for thermal mapping of semiconductors

    DOE Patents [OSTI]

    Walter, Martin J.

    1989-06-20

    Semiconductors may be optically tested for their temperatures by illuminating them with tunable monochromatic electromagnetic radiation and observing the light reflected off of them. A transition point will occur when the wavelength of the light corresponds with the actual band gap energy of the semiconductor. At the transition point, the image of the semiconductor will appreciably darken as the light is transmitted through it, rather than being reflected off of it. The wavelength of the light at the transition point corresponds to the actual band gap energy and the actual temperature of the semiconductor.

  4. Lensless X-Ray Imaging in Reflection

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lensless X-Ray Imaging in Reflection Lensless X-Ray Imaging in Reflection Print Wednesday, 26 October 2011 00:00 The advent of x-ray free-electron laser (XFEL) light sources has led to an outburst of research activities in the field of lensless imaging. XFELs combine the advantages of sychrotron light sources (high brightness and x-ray wavelengths relevant to atomic and molecular phenomena) with the advantages of visible-light lasers (highly coherent beams). All of these characteristics are

  5. FAST ACTING CURRENT SWITCH

    DOE Patents [OSTI]

    Batzer, T.H.; Cummings, D.B.; Ryan, J.F.

    1962-05-22

    A high-current, fast-acting switch is designed for utilization as a crowbar switch in a high-current circuit such as used to generate the magnetic confinement field of a plasma-confining and heat device, e.g., Pyrotron. The device particularly comprises a cylindrical housing containing two stationary, cylindrical contacts between which a movable contact is bridged to close the switch. The movable contact is actuated by a differential-pressure, airdriven piston assembly also within the housing. To absorb the acceleration (and the shock imparted to the device by the rapidly driven, movable contact), an adjustable air buffer assembly is provided, integrally connected to the movable contact and piston assembly. Various safety locks and circuit-synchronizing means are also provided to permit proper cooperation of the invention and the high-current circuit in which it is installed. (AEC)

  6. Clean Currents | Open Energy Information

    Open Energy Info (EERE)

    Currents Jump to: navigation, search Logo: Clean Currents Name: Clean Currents Address: 155 Gibbs St. Suite 425 Place: Rockville, Maryland Zip: 20850 Sector: Wind energy...

  7. Fault current limiter

    DOE Patents [OSTI]

    Darmann, Francis Anthony

    2013-10-08

    A fault current limiter (FCL) includes a series of high permeability posts for collectively define a core for the FCL. A DC coil, for the purposes of saturating a portion of the high permeability posts, surrounds the complete structure outside of an enclosure in the form of a vessel. The vessel contains a dielectric insulation medium. AC coils, for transporting AC current, are wound on insulating formers and electrically interconnected to each other in a manner such that the senses of the magnetic field produced by each AC coil in the corresponding high permeability core are opposing. There are insulation barriers between phases to improve dielectric withstand properties of the dielectric medium.

  8. Prisms with total internal reflection as solar reflectors

    DOE Patents [OSTI]

    Rabl, Arnulf; Rabl, Veronika

    1978-01-01

    An improved reflective wall for radiant energy collection and concentration devices is provided. The wall is comprised of a plurality of prisms whose frontal faces are adjacent and which reflect the desired radiation by total internal reflection.

  9. Bidirectional reflectivity of mirrors in solar power plants

    SciTech Connect (OSTI)

    Khrustalyov, B.A.; Ragimov, R.K.

    1991-01-01

    In this paper a technique for measuring the bidirectional reflectivity of mirrors is presented. An experimental setup is described which allows one to measure the reflecting characteristics at small angles of scattering. These reflectivities are approximated by an exponential relation.

  10. Heat reflecting tape for thermoelectric converter

    DOE Patents [OSTI]

    Purdy, David L.

    1977-01-01

    Threads are interlaced with thermoelectric wires to provide a woven cloth in tape form, there being an intermediate layer of heat radiation reflecting material (e.g., aluminum foil) insulated electrically from said wires, which are of opposite thermoelectric polarity and connected as a plurality of thermocouples.

  11. Total internal reflection laser tools and methods

    DOE Patents [OSTI]

    Zediker, Mark S.; Faircloth, Brian O.; Kolachalam, Sharath K.; Grubb, Daryl L.

    2016-02-02

    There is provided high power laser tools and laser heads that utilize total internal reflection ("TIR") structures to direct the laser beam along a laser beam path within the TIR structure. The TIR structures may be a TIR prism having its hypotenuse as a TIR surface.

  12. Electrochromic window with high reflectivity modulation

    DOE Patents [OSTI]

    Goldner, Ronald B.; Gerouki, Alexandra; Liu, Te-Yang; Goldner, Mark A.; Haas, Terry E.

    2000-01-01

    A multi-layered, active, thin film, solid-state electrochromic device having a high reflectivity in the near infrared in a colored state, a high reflectivity and transmissivity modulation when switching between colored and bleached states, a low absorptivity in the near infrared, and fast switching times, and methods for its manufacture and switching are provided. In one embodiment, a multi-layered device comprising a first indium tin oxide transparent electronic conductor, a transparent ion blocking layer, a tungsten oxide electrochromic anode, a lithium ion conducting-electrically resistive electrolyte, a complimentary lithium mixed metal oxide electrochromic cathode, a transparent ohmic contact layer, a second indium oxide transparent electronic conductor, and a silicon nitride encapsulant is provided. Through elimination of optional intermediate layers, simplified device designs are provided as alternative embodiments. Typical colored-state reflectivity of the multi-layered device is greater than 50% in the near infrared, bleached-state reflectivity is less than 40% in the visible, bleached-state transmissivity is greater than 60% in the near infrared and greater than 40% in the visible, and spectral absorbance is less than 50% in the range from 0.65-2.5 .mu.m.

  13. Multi-reflective acoustic wave device

    DOE Patents [OSTI]

    Andle, Jeffrey C.

    2006-02-21

    An acoustic wave device, which utilizes multiple localized reflections of acoustic wave for achieving an infinite impulse response while maintaining high tolerance for dampening effects, is disclosed. The device utilized a plurality of electromechanically significant electrodes disposed on most of the active surface. A plurality of sensors utilizing the disclosed acoustic wave mode device are also described.

  14. Integrated X-Ray Reflectivity Measurements for Elliptically Curved...

    Office of Scientific and Technical Information (OSTI)

    Integrated X-Ray Reflectivity Measurements for Elliptically Curved PET Crystals Citation Details In-Document Search Title: Integrated X-Ray Reflectivity Measurements for ...

  15. Sandia Energy - Improved Method to Measure Glare and Reflected...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and more accurate method of measuring the irradiance from solar reflections using a digital camera. Measurements of reflected solar irradiance is of great importance to...

  16. Procedure for measuring the solar reflectance of flat or curved...

    Office of Scientific and Technical Information (OSTI)

    Procedure for measuring the solar reflectance of flat or curved roofing assemblies Citation Details In-Document Search Title: Procedure for measuring the solar reflectance of flat ...

  17. Measuring solar reflectance Part II: Review of practical methods...

    Office of Scientific and Technical Information (OSTI)

    Citation Details In-Document Search Title: Measuring solar reflectance Part II: Review of ... A companion article explored how solar reflectance varies with surface orientation and ...

  18. Motor Current Data Collection System

    Energy Science and Technology Software Center (OSTI)

    1992-12-01

    The Motor Current Data Collection System (MCDCS) uses IBM compatible PCs to collect, process, and store Motor Current Signature information.

  19. A NEW METHOD FOR OBTAINING THE STAR FORMATION LAW IN GALAXIES

    SciTech Connect (OSTI)

    Heiner, Jonathan S.; Allen, Ronald J.; Van der Kruit, Pieter C.

    2010-08-20

    We present a new observational method to evaluate the exponent of the star formation law as initially formulated by Schmidt, i.e., the power-law expression assumed to relate the rate of star formation in a volume of space to the local total gas volume density present there. Total volume densities in the gas clouds surrounding an OB association are determined with a simple model which considers the atomic hydrogen as a photodissociation product on the cloud surfaces. The photodissociating photon flux incident on the cloud is computed from the far-UV luminosity of the OB association and the geometry. As an example, we have applied this 'PDR Method' to a sample of star-forming regions in M33 using Very Large Array (VLA) 21 cm data for the H I and Galaxy Evolution Explorer (GALEX) imagery in the far-UV. With these two observables, our approach provides an estimate of the total volume density of hydrogen (atomic + molecular) in the gas clouds surrounding the young star cluster. A graph in logarithmic coordinates of the cluster UV luminosity versus the total density in the surrounding gas provides a direct measure of the exponent of the star formation law. However, we show that this plot is severely affected by observational selection, which renders large areas of the diagram inaccessible to the data. An ordinary least-squares regression fit to a straight line, therefore, gives a strongly biased result. In the present case, the slope of such a fit primarily reflects the boundary defined when the 21 cm line becomes optically thick and is no longer a reliable measure of the H I column density. We use a maximum likelihood statistical approach which can deal with truncated and skewed data, and also takes account of the large uncertainties in the total gas densities which we derive. The exponent we obtain for the Schmidt law in M33 is 1.4 {+-} 0.2.

  20. Power-law spatial dispersion from fractional Liouville equation

    SciTech Connect (OSTI)

    Tarasov, Vasily E.

    2013-10-15

    A microscopic model in the framework of fractional kinetics to describe spatial dispersion of power-law type is suggested. The Liouville equation with the Caputo fractional derivatives is used to obtain the power-law dependence of the absolute permittivity on the wave vector. The fractional differential equations for electrostatic potential in the media with power-law spatial dispersion are derived. The particular solutions of these equations for the electric potential of point charge in this media are considered.

  1. Equal Employment Opportunity/Workforce Restructuring Laws | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Opportunity/Workforce Restructuring Laws Equal Employment Opportunity/Workforce Restructuring Laws Equal Employment Opportunity laws prohibit discrimination against individuals on the basis of various protected categories including race, sex, age, disability, and veteran status: Title VII of the Civil Rights Act of 1964 Americans with Disabilities Act of 1990 Age Discrimination in Employment Act of 1967 Executive Order 11246 of September 24, 1965 (Equal Employment Opportunity Act)

  2. General Counsel Law Student Intern Program | Department of Energy

    Energy Savers [EERE]

    All interested students are encouraged to apply; however the positions are very competitive. U.S. Citizenship is required. Strong academic credentials and law journal experience ...

  3. ACHP - Relationship of Section 106 to Other Laws | Open Energy...

    Open Energy Info (EERE)

    Section 106 of the National Historic Preservation Act and other laws. Author Advisory Council on Historic Preservation Published Advisory Council on Historic Preservation, Date...

  4. International Maritime Law Institute (IMLI) | Open Energy Information

    Open Energy Info (EERE)

    agency of the United Nations. The Institute is an international centre for the training of specialists in maritime law. It also contributes to the development and...

  5. Labor Standards/Wage and Hour Laws | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Standards/Wage and Hour Laws Labor Standards/Wage and Hour Laws Labor Standards and Wage/Hour laws establish minimum wage, overtime pay, recordkeeping, and minimum leave requirements: 40 U.S.C. chapter 31, subchapter IV, (Davis-Bacon Act) 41 U.S.C. chapter 67, (Service Contract Act) Fair Labor Standards Act Family and Medical Leave Act Migrant and Seasonal Agricultural Worker Protection Act DOE training on some of these laws are available below: Labor Standards 101 (1.76 MB) Davis-Bacon Act

  6. Formation of Hard Power Laws in the Energetic Particle Spectra...

    Office of Scientific and Technical Information (OSTI)

    Formation of Hard Power Laws in the Energetic Particle Spectra Resulting from Relativistic Magnetic Reconnection Citation Details In-Document Search Title: Formation of Hard Power ...

  7. Violation of the Wiedemann-Franz Law in Hydrodynamic Electron...

    Office of Scientific and Technical Information (OSTI)

    Violation of the Wiedemann-Franz Law in Hydrodynamic Electron Liquids This content will become publicly available on July 30, 2016 Prev Next Title: Violation of the ...

  8. Violation of the Wiedemann-Franz Law in Hydrodynamic Electron...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Violation of the Wiedemann-Franz Law in Hydrodynamic Electron Liquids Citation Details In-Document Search This content will become publicly available on July 30, ...

  9. High current ion source

    DOE Patents [OSTI]

    Brown, Ian G.; MacGill, Robert A.; Galvin, James E.

    1990-01-01

    An ion source utilizing a cathode and anode for producing an electric arc therebetween. The arc is sufficient to vaporize a portion of the cathode to form a plasma. The plasma leaves the generation region and expands through another regon. The density profile of the plasma may be flattened using a magnetic field formed within a vacuum chamber. Ions are extracted from the plasma to produce a high current broad on beam.

  10. Fuel cell current collector

    DOE Patents [OSTI]

    Katz, Murray; Bonk, Stanley P.; Maricle, Donald L.; Abrams, Martin

    1991-01-01

    A fuel cell has a current collector plate (22) located between an electrode (20) and a separate plate (25). The collector plate has a plurality of arches (26, 28) deformed from a single flat plate in a checkerboard pattern. The arches are of sufficient height (30) to provide sufficient reactant flow area. Each arch is formed with sufficient stiffness to accept compressive load and sufficient resiliently to distribute the load and maintain electrical contact.

  11. Characterization of background reflectivity for MEDUSA

    SciTech Connect (OSTI)

    Oldenborg, R. C.; Tiee, J. J.; Foy, B. R.; Petrin, R. R.; Wilson, C. W.

    2003-01-01

    The DARPA MEDUSA program goal is to detect, locate, and identify electro-optical threats in the vicinity of a moving platform. Laser sensing will be employed to find these threats by looking for anomalous reflections from threat sensors. However, the reflectivity variability (clutter) in both natural and manmade backgrounds will inherently limit target detection levels. In parallel with advanced component development by several aerospace contractors, a study of this clutter limitation was initiated in the long-wave (LW) and midwave (MW) infrared spectral regions to properly drive system design parameters. The analysis of clutter and associated limits on detection has been a major component of LANL efforts in laser remote sensing for non-proliferation. LANL is now analyzing existing data and conducting additional selected measurements in both the LWIR (9 and 10.6 pm) and MWIR (4.6 pm) in support of the DARPA program to increase our understanding of these clutter limitations and, thereby aid in the design and development of the MEDUSA system. The status of the LANL effort will be discussed. A variety of different natural and manmade target types have been investigated. Target scenes range from relatively low clutter sites typical of a southwestern desert to higher clutter downtown urban sites. Images are created by conducting raster scans across a scene interest. These images are then analyzed using data clustering techniques (e g K-means) to identify regions within the scene that contain similar reflectivity profiles. Data will be presented illustrating the reflectivity variability among different samples of the same target type, Le. within the same cluster, and among different data clusters. In general, it is found that the variability of reflectivities among similar targets is well represented by a log-normal distribution. Furthermore, manmade target tend to have higher reflectivities and more variability than natural targets. The implications of this observation

  12. Catheter based mid-infrared reflectance and reflectance generated absorption spectroscopy

    DOE Patents [OSTI]

    Holman, Hoi-Ying N

    2013-10-29

    A method of characterizing conditions in a tissue, by (a) providing a catheter that has a light source that emits light in selected wavenumbers within the range of mid-IR spectrum; (b) directing the light from the catheter to an area of tissue at a location inside a blood vessel of a subject; (c) collecting light reflected from the location and generating a reflectance spectra; and (d) comparing the reflectance spectra to a reference spectra of normal tissue, whereby a location having an increased number of absorbance peaks at said selected wavenumbers indicates a tissue inside the blood vessel containing a physiological marker for atherosclerosis.

  13. Chemical composition analysis and product consistency tests to support enhanced Hanford waste glass models: Results for the January, March, and April 2015 LAW glasses

    SciTech Connect (OSTI)

    Fox, K. M.; Edwards, T. B.; Riley, W. T.; Best, D. R.

    2015-09-03

    In this report, the Savannah River National Laboratory provides chemical analyses and Product Consistency Test (PCT) results for several simulated low activity waste (LAW) glasses (designated as the January, March, and April 2015 LAW glasses) fabricated by the Pacific Northwest National Laboratory. The results of these analyses will be used as part of efforts to revise or extend the validation regions of the current Hanford Waste Treatment and Immobilization Plant glass property models to cover a broader span of waste compositions.

  14. Chemical composition analysis and product consistency tests to support Enhanced Hanford Waste Glass Models. Results for the Augusta and October 2014 LAW Glasses

    SciTech Connect (OSTI)

    Fox, K. M.; Edwards, T. B.; Best, D. R.

    2015-07-07

    In this report, the Savannah River National Laboratory provides chemical analyses and Product Consistency Test (PCT) results for several simulated low activity waste (LAW) glasses (designated as the August and October 2014 LAW glasses) fabricated by the Pacific Northwest National Laboratory. The results of these analyses will be used as part of efforts to revise or extend the validation regions of the current Hanford Waste Treatment and Immobilization Plant glass property models to cover a broader span of waste compositions.

  15. Method for producing highly reflective metal surfaces

    DOE Patents [OSTI]

    Arnold, J.B.; Steger, P.J.; Wright, R.R.

    1982-03-04

    The invention is a novel method for producing mirror surfaces which are extremely smooth and which have high optical reflectivity. The method includes depositing, by electrolysis, an amorphous layer of nickel on an article and then diamond-machining the resulting nickel surface to increase its smoothness and reflectivity. The machined nickel surface then is passivated with respect to the formation of bonds with electrodeposited nickel. Nickel then is electrodeposited on the passivated surface to form a layer of electroplated nickel whose inside surface is a replica of the passivated surface. The mandrel then may be-re-passivated and provided with a layer of electrodeposited nickel, which is then recovered from the mandrel providing a second replica. The mandrel can be so re-used to provide many such replicas. As compared with producing each mirror-finished article by plating and diamond-machining, the new method is faster and less expensive.

  16. Reflective optical imaging method and circuit

    DOE Patents [OSTI]

    Shafer, David R.

    2001-01-01

    An optical system compatible with short wavelength (extreme ultraviolet) radiation comprising four reflective elements for projecting a mask image onto a substrate. The four optical elements are characterized in order from object to image as convex, concave, convex and concave mirrors. The optical system is particularly suited for step and scan lithography methods. The invention increases the slit dimensions associated with ringfield scanning optics, improves wafer throughput and allows higher semiconductor device density.

  17. Compact reflective imaging spectrometer utilizing immersed gratings

    DOE Patents [OSTI]

    Chrisp, Michael P. (Danville, CA)

    2006-05-09

    A compact imaging spectrometer comprising an entrance slit for directing light, a first mirror that receives said light and reflects said light, an immersive diffraction grating that diffracts said light, a second mirror that focuses said light, and a detector array that receives said focused light. The compact imaging spectrometer can be utilized for remote sensing imaging spectrometers where size and weight are of primary importance.

  18. Lensless X-Ray Imaging in Reflection

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lensless X-Ray Imaging in Reflection Print The advent of x-ray free-electron laser (XFEL) light sources has led to an outburst of research activities in the field of lensless imaging. XFELs combine the advantages of sychrotron light sources (high brightness and x-ray wavelengths relevant to atomic and molecular phenomena) with the advantages of visible-light lasers (highly coherent beams). All of these characteristics are important for coherent x-ray diffraction imaging-lensless imaging

  19. Lensless X-Ray Imaging in Reflection

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lensless X-Ray Imaging in Reflection Print The advent of x-ray free-electron laser (XFEL) light sources has led to an outburst of research activities in the field of lensless imaging. XFELs combine the advantages of sychrotron light sources (high brightness and x-ray wavelengths relevant to atomic and molecular phenomena) with the advantages of visible-light lasers (highly coherent beams). All of these characteristics are important for coherent x-ray diffraction imaging-lensless imaging

  20. Lensless X-Ray Imaging in Reflection

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lensless X-Ray Imaging in Reflection Print The advent of x-ray free-electron laser (XFEL) light sources has led to an outburst of research activities in the field of lensless imaging. XFELs combine the advantages of sychrotron light sources (high brightness and x-ray wavelengths relevant to atomic and molecular phenomena) with the advantages of visible-light lasers (highly coherent beams). All of these characteristics are important for coherent x-ray diffraction imaging-lensless imaging

  1. Lensless X-Ray Imaging in Reflection

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lensless X-Ray Imaging in Reflection Print The advent of x-ray free-electron laser (XFEL) light sources has led to an outburst of research activities in the field of lensless imaging. XFELs combine the advantages of sychrotron light sources (high brightness and x-ray wavelengths relevant to atomic and molecular phenomena) with the advantages of visible-light lasers (highly coherent beams). All of these characteristics are important for coherent x-ray diffraction imaging-lensless imaging

  2. Report for Treating Hanford LAW and WTP SW Simulants: Pilot Plant Mineralizing Flowsheet

    SciTech Connect (OSTI)

    Arlin Olson

    2012-02-28

    The US Department of Energy is responsible for managing the disposal of radioactive liquid waste in underground storage tanks at the Hanford site in Washington State. The Hanford waste treatment and immobilization plant (WPT) will separate the waste into a small volume of high level waste (HLW), containing most of the radioactive constituents, and a larger volume of low activity waste (LAW), containing most of the non-radioactive chemical and hazardous constituents. The HLW and LAW will be converted into immobilized waste forms for disposal. Currently there is inadequate LAW vitrification capacity planned at the WTP to complete the mission within the required timeframe. Therefore additional LAW capacity is required. One candidate supplemental treatment technology is the fluidized bed steam reformer process (FBSR). This report describes the demonstration testing of the FBSR process using a mineralizing flowsheet for treating simulated Hanford LAW and secondary waste from the WTP (WTP SW). The FBSR testing project produced leach-resistant solid products and environmentally compliant gaseous effluents. The solid products incorporated normally soluble ions into an alkali alumino-silicate (NaS) mineral matrix. Gaseous emissions were found to be within regulatory limits. Cesium and rhenium were captured in the mineralized products with system removal efficiencies of 99.999% and 99.998 respectively. The durability and leach performance of the FBSR granular solid were superior to the low activity reference material (LMR) glass standards. Normalized product consistency test (PCT) release rates for constituents of concern were approximately 2 orders of magnitude less than that of sodium in the Hanford glass [standard].

  3. Development and Validation of Temperature Dependent Thermal Neutron Scattering Laws for Applications and Safety Implications in Generation IV Reactor Designs

    SciTech Connect (OSTI)

    Ayman Hawari

    2008-06-20

    The overall obljectives of this project are to critically review the currently used thermal neutron scattering laws for various moderators as a function of temperature, select as well documented and representative set of experimental data sensitive to the neutron spectra to generate a data base of benchmarks, update models and models parameters by introducing new developments in thermalization theory and condensed matter physics into various computational approaches in establishing the scattering laws, benchmark the results against the experimentatl set. In the case of graphite, a validation experiment is performed by observing nutron slowing down as a function of temperatures equal to or greater than room temperature.

  4. Multiple-reflection optical gas cell

    DOE Patents [OSTI]

    Matthews, Thomas G.

    1983-01-01

    A multiple-reflection optical cell for Raman or fluorescence gas analysis consists of two spherical mirrors positioned transverse to a multiple-pass laser cell in a confronting plane-parallel alignment. The two mirrors are of equal diameter but possess different radii of curvature. The spacing between the mirrors is uniform and less than half of the radius of curvature of either mirror. The mirror of greater curvature possesses a small circular portal in its center which is the effective point source for conventional F1 double lens collection optics of a monochromator-detection system. Gas to be analyzed is flowed into the cell and irradiated by a multiply-reflected composite laser beam centered between the mirrors of the cell. Raman or fluorescence radiation originating from a large volume within the cell is (1) collected via multiple reflections with the cell mirrors, (2) partially collimated and (3) directed through the cell portal in a geometric array compatible with F1 collection optics.

  5. Light reflecting apparatus including a multi-aberration light reflecting surface

    DOE Patents [OSTI]

    Sawicki, Richard H.; Sweatt, William

    1987-01-01

    A light reflecting apparatus including a multi-aberration bendable light reflecting surface is disclosed herein. This apparatus includes a structural assembly comprised of a rectangular plate which is resiliently bendable, to a limited extent, and which has a front side defining the multi-aberration light reflecting surface and an opposite back side, and a plurality of straight leg members rigidly connected with the back side of the plate and extending rearwardly therefrom. The apparatus also includes a number of different adjustment mechanisms, each of which is connected with specific ones of the leg members. These mechanisms are adjustably movable in different ways for applying corresponding forces to the leg members in order to bend the rectangular plate and light reflecting surface into different predetermined curvatures and which specifically include quadratic and cubic curvatures corresponding to different optical aberrations.

  6. A light reflecting apparatus including a multi-aberration light reflecting surface

    DOE Patents [OSTI]

    Sawicki, R.H.; Sweatt, W.

    1985-11-21

    A light reflecting apparatus including a multi-aberration bendable light reflecting surface is disclosed herein. This apparatus includes a structural assembly comprised of a rectangular plate which is resiliently bendable, to a limited extent, and which has a front side defining the multi-aberration light reflecting surface and an opposite back side, and a plurality of straight leg members rigidly connected with the back side of the plate and extending rearwardly therefrom. The apparatus also includes a number of different adjustment mechanisms, each of which is connected with specific ones of the leg members. These mechanisms are adjustably movable in different ways for applying corresponding forces to the leg members in order to bend the rectangular plate and light reflecting surface into different predetermined curvatures and which specifically include quadratic and cubic curvatures corresponding to different optical aberrations.

  7. A NEW REDDENING LAW FOR M4

    SciTech Connect (OSTI)

    Hendricks, Benjamin; VandenBerg, Don A.; Stetson, Peter B.; Dall'Ora, Massimo

    2012-07-15

    We have used a combination of broadband near-infrared and optical Johnson-Cousins photometry to study the dust properties in the line of sight to the Galactic globular cluster M4. We have investigated the reddening effects in terms of absolute strength and variation across the cluster field, as well as the shape of the reddening law defined by the type of dust. All three aspects had been poorly defined for this system and, consequently, there has been controversy about the absolute distance to this globular cluster, which is closest to the Sun. Here, we determine the ratio of absolute to selective extinction (R{sub V} ) in the line of sight toward M4, which is known to be a useful indicator for the type of dust and therefore characterizes the applicable reddening law. Our method is independent of age assumptions and appears to be significantly more precise and accurate than previous approaches. We obtain A{sub V} /E(B - V) = 3.76 {+-} 0.07 (random error) for the dust in the line of sight to M4 for our set of filters. That corresponds to a dust-type parameter R{sub V} = 3.62 {+-} 0.07 in the Cardelli et al. reddening law. With this value, the distance to M4 is found to be 1.80 {+-} 0.05 kpc, corresponding to a true distance modulus of (m - M){sub 0} = 11.28 {+-} 0.06 (random error). A reddening map for M4 has been created, which reveals a spatial differential reddening of {delta}E(B - V) {>=} 0.2 mag across the field within 10' around the cluster center; this is about 50% of the total mean reddening, which we have determined to be E(B - V) = 0.37 {+-} 0.01. In order to provide accurate zero points for the extinction coefficients of our photometric filters, we investigated the impact of stellar parameters such as temperature, surface gravity, and metallicity on the extinction properties and the necessary corrections in different bandpasses. Using both synthetic ATLAS9 spectra and observed spectral energy distributions, we found similarly sized effects for the range

  8. Current status of APEX

    SciTech Connect (OSTI)

    Betts, R.R.

    1993-10-01

    The ATLAS Positron Experiment (APEX) is designed to investigate narrow structures observed in the energy spectra of positions and positron-electron coincidences produced in collisions of high Z ions with high Z targets at Coulomb barrier energies. The apparatus consists of a large diameter uniform-field solenoid mounted transverse to the beam direction. Scattered heavy ions are detected in a gas-counter array. Electrons and positrons transversing the solenoid are detected in highly segmented silicon arrays surrounded by position sensitive NaI detectors for positron identification. The concept of APEX and the current status of the apparatus will be discussed.

  9. Current Annualized Request

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Appropriation FY 2012 FY 2013 FY 2014 Current Annualized Request CR $ % Energy And Water Development, And Related Agencies Energy Programs Energy Efficiency and Renewable Energy 1,780,548 1,820,713 2,775,700 +995,152 +55.9% Electricity Delivery and Energy Reliability 136,178 139,954 169,015 +32,837 +24.1% Nuclear Energy 760,466 770,075 735,460 -25,006 -3.3% Race to the Top for Energy Efficiency and Grid Modernization 0 0 200,000 +200,000 N/A Fossil Energy Programs Fossil Energy Research and

  10. Aberration-free, all-reflective laser pulse stretcher

    DOE Patents [OSTI]

    Perry, Michael D.; Banks, Paul S.; Stuart, Brent C.; Fochs, Scott N.

    1999-09-28

    An all-reflective pulse stretcher for laser systems employing chirped-pulse amplification enables on-axis use of the focusing mirror which results in ease of use, significantly decreased sensitivity to alignment and near aberration-free performance. By using a new type of diffraction grating which contains a mirror incorporated into the grating, the stretcher contains only three elements: 1) the grating, 2) a spherical or parabolic focusing mirror, and 3) a flat mirror. Addition of a fourth component, a retro-reflector, enables multiple passes of the same stretcher resulting in stretching ratios beyond the current state of the art in a simple and compact design. The pulse stretcher has been used to stretch pulses from 20 fsec to over 600 psec (a stretching ratio in excess of 30,000).

  11. Aternating current photovoltaic building block

    DOE Patents [OSTI]

    Bower, Ward Issac; Thomas, Michael G.; Ruby, Douglas S.

    2004-06-15

    A modular apparatus for and method of alternating current photovoltaic power generation comprising via a photovoltaic module, generating power in the form of direct current; and converting direct current to alternating current and exporting power via one or more power conversion and transfer units attached to the module, each unit comprising a unitary housing extending a length or width of the module, which housing comprises: contact means for receiving direct current from the module; one or more direct current-to-alternating current inverters; an alternating current bus; and contact means for receiving alternating current from the one or more inverters.

  12. Memorandum, Protective Force Law Enforcement Authority- May 1, 2009

    Broader source: Energy.gov [DOE]

    Investigation allegations that contractor procetive force personnel at a DOE site exceeded their legistative ,regulatory, and policy-based authority by providing on-duty, armed off-site assistance to local law enforcement authorites during other than recapture/recovery operations, and by accessing the local law enforcement database for background checks during the course of on-site administrative traffic stops.

  13. Resurrecting power law inflation in the light of Planck results

    SciTech Connect (OSTI)

    Unnikrishnan, Sanil; Sahni, Varun E-mail: varun@iucaa.ernet.in

    2013-10-01

    It is well known that a canonical scalar field with an exponential potential can drive power law inflation (PLI). However, the tensor-to-scalar ratio in such models turns out to be larger than the stringent limit set by recent Planck results. We propose a new model of power law inflation for which the scalar spectra index, the tensor-to-scalar ratio and the non-gaussianity parameter f{sub N{sub L}{sup equil}} are in excellent agreement with Planck results. Inflation, in this model, is driven by a non-canonical scalar field with an inverse power law potential. The Lagrangian for our model is structurally similar to that of a canonical scalar field and has a power law form for the kinetic term. A simple extension of our model resolves the graceful exit problem which usually afflicts models of power law inflation.

  14. Power-law connections: From Zipf to Heaps and beyond

    SciTech Connect (OSTI)

    Eliazar, Iddo I.; Cohen, Morrel H.

    2013-05-15

    In this paper we explore the asymptotic statistics of a general model of rank distributions in the large-ensemble limit; the construction of the general model is motivated by recent empirical studies of rank distributions. Applying Lorenzian, oligarchic, and Heapsian asymptotic analyses we establish a comprehensive set of closed-form results linking together rank distributions, probability distributions, oligarchy sizes, and innovation rates. In particular, the general results reveal the fundamental underlying connections between Zipfs law, Paretos law, and Heaps lawthree elemental empirical power-laws that are ubiquitously observed in the sciences. -- Highlights: ? The large-ensemble asymptotic statistics of rank distributions are explored. ? Lorenzian, oligarchic, and Heapsian asymptotic analyses are applied. ? Associated oligarchy sizes and induced innovation rates are analyzed. ? General elemental statistical connections are established. ? The underlying connections between Zipfs, Paretos and Heaps laws are unveiled.

  15. Micropower radar systems for law enforcement technology

    SciTech Connect (OSTI)

    Azevedo, S.G.; Mast, J.; Brase, J.

    1994-11-15

    LLNL researchers have pioneered a unique compact low-power and inexpensive radar technology (microradar) that has enormous potential in various industries. Some licenses are currently in place for motion sensors and stud finders. The ultra-wideband characteristics of the microradar (4 to 10 GHz) make it difficult to detect, yet provide potential range resolution of 1 cm at ranges of greater than 20 meters. Real and synthetic apertures arrays of radar elements can address imaging applications behind walls at those distances. Personnel detection applications are currently being tested.

  16. Current Annualized Request

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Organization FY 2012 FY 2013 FY 2014 Current Annualized Request CR $ % National Security Weapons Activities* 7,214,834 7,557,342 7,868,409 +311,067 +4.1% Defense Nuclear Nonproliferation 2,300,950 2,409,930 2,140,142 -160,808 -7.0% Naval Reactors 1,080,000 1,086,610 1,246,134 +166,134 +15.4% Office of the Administrator 410,000 412,509 397,784 -12,216 -3.0% Total, National Nuclear Security Administration 11,005,784 11,466,391 11,652,469 +304,177 +2.8% Energy and Environment Energy Efficiency and

  17. Currents, Berkeley Lab's Biweekly Newspaper

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Currents Index A-Z Index Search Phone Book Comments Ernest Orlando Lawrence Berkeley National Laboratory Search Currents Back Issues (1994 to present) Search Lab science articles...

  18. Reflective optical imaging system with balanced distortion

    DOE Patents [OSTI]

    Chapman, Henry N.; Hudyma, Russell M.; Shafer, David R.; Sweeney, Donald W.

    1999-01-01

    An optical system compatible with short wavelength (extreme ultraviolet) An optical system compatible with short wavelength (extreme ultraviolet) radiation comprising four reflective elements for projecting a mask image onto a substrate. The four optical elements comprise, in order from object to image, convex, concave, convex and concave mirrors. The optical system is particularly suited for step and scan lithography methods. The invention enables the use of larger slit dimensions associated with ring field scanning optics, improves wafer throughput and allows higher semiconductor device density. The inventive optical system is characterized by reduced dynamic distortion because the static distortion is balanced across the slit width.

  19. Seismic reflection imaging at a Shallow Site

    SciTech Connect (OSTI)

    Milligan, P.; Rector, J.; Bainer, R.

    1997-01-01

    The objective of our studies was to determine the best seismic method to image these sediments, between the water table at 3 m depth to the basement at 35 m depth. Good cross-correlation between well logs and the seismic data was also desirable, and would facilitate the tracking of known lithological units away from the wells. For instance, known aquifer control boundaries may then be mapped out over the boundaries, and may be used in a joint inversion with reflectivity data and other non-seismic geophysical data to produce a 3-D image containing quantitative physical properties of the target area.

  20. Reflective echo tomographic imaging using acoustic beams

    DOE Patents [OSTI]

    Kisner, Roger; Santos-Villalobos, Hector J

    2014-11-25

    An inspection system includes a plurality of acoustic beamformers, where each of the plurality of acoustic beamformers including a plurality of acoustic transmitter elements. The system also includes at least one controller configured for causing each of the plurality of acoustic beamformers to generate an acoustic beam directed to a point in a volume of interest during a first time. Based on a reflected wave intensity detected at a plurality of acoustic receiver elements, an image of the volume of interest can be generated.

  1. Reflective optical imaging systems with balanced distortion

    DOE Patents [OSTI]

    Hudyma, Russell M.

    2001-01-01

    Optical systems compatible with extreme ultraviolet radiation comprising four reflective elements for projecting a mask image onto a substrate are described. The four optical elements comprise, in order from object to image, convex, concave, convex and concave mirrors. The optical systems are particularly suited for step and scan lithography methods. The invention enables the use of larger slit dimensions associated with ring field scanning optics, improves wafer throughput, and allows higher semiconductor device density. The inventive optical systems are characterized by reduced dynamic distortion because the static distortion is balanced across the slit width.

  2. Solar photovoltaic reflective trough collection structure

    SciTech Connect (OSTI)

    Anderson, Benjamin J.; Sweatt, William C.; Okandan, Murat; Nielson, Gregory N.

    2015-11-19

    A photovoltaic (PV) solar concentration structure having at least two troughs encapsulated in a rectangular parallelepiped optical plastic structure, with the troughs filled with an optical plastic material, the troughs each having a reflective internal surface and approximately parabolic geometry, and the troughs each including photovoltaic cells situated so that light impinging on the optical plastic material will be concentrated onto the photovoltaic cells. Multiple structures can be connected to provide a solar photovoltaic collection system that provides portable, efficient, low-cost electrical power.

  3. Lensless X-Ray Imaging in Reflection

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    X-Ray Imaging in Reflection Print The advent of x-ray free-electron laser (XFEL) light sources has led to an outburst of research activities in the field of lensless imaging. XFELs combine the advantages of sychrotron light sources (high brightness and x-ray wavelengths relevant to atomic and molecular phenomena) with the advantages of visible-light lasers (highly coherent beams). All of these characteristics are important for coherent x-ray diffraction imaging-lensless imaging techniques that

  4. Lensless X-Ray Imaging in Reflection

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    X-Ray Imaging in Reflection Print The advent of x-ray free-electron laser (XFEL) light sources has led to an outburst of research activities in the field of lensless imaging. XFELs combine the advantages of sychrotron light sources (high brightness and x-ray wavelengths relevant to atomic and molecular phenomena) with the advantages of visible-light lasers (highly coherent beams). All of these characteristics are important for coherent x-ray diffraction imaging-lensless imaging techniques that

  5. Current Density Scaling in Electrochemical Flow Capacitors

    SciTech Connect (OSTI)

    Hoyt, NC; Wainright, JS; Savinell, RF

    2015-02-18

    Electrochemical flow capacitors (EFCs) are a recently developed energy storage technology. One of the principal performance metrics of an EFC is the steady-state electrical current density that it can accept or deliver. Numerical models exist to predict this performance for specific cases, but here we present a study of how the current varies with respect to the applied cell voltage, flow rate, cell dimensions, and slurry properties using scaling laws. The scaling relationships are confirmed by numerical simulations and then subsequently by comparison to results from symmetric cell EFC experiments. This modeling approach permits the delimitation of three distinct operational regimes dependent on the values of two nondimensional combinations of the pertinent variables (specifically, a capacitive Graetz number and a conductivity ratio). Lastly, the models and nondimensional numbers are used to provide design guidance in terms of criteria for proper EFC operation. (C) The Author(s) 2015. Published by ECS. This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 License (CC BY, http://creativecommons.org/licenses/by/4.0/), which permits unrestricted reuse of the work in any medium, provided the original work is properly cited. All rights reserved.

  6. Circulating current battery heater

    DOE Patents [OSTI]

    Ashtiani, Cyrus N.; Stuart, Thomas A.

    2001-01-01

    A circuit for heating energy storage devices such as batteries is provided. The circuit includes a pair of switches connected in a half-bridge configuration. Unidirectional current conduction devices are connected in parallel with each switch. A series resonant element for storing energy is connected from the energy storage device to the pair of switches. An energy storage device for intermediate storage of energy is connected in a loop with the series resonant element and one of the switches. The energy storage device which is being heated is connected in a loop with the series resonant element and the other switch. Energy from the heated energy storage device is transferred to the switched network and then recirculated back to the battery. The flow of energy through the battery causes internal power dissipation due to electrical to chemical conversion inefficiencies. The dissipated power causes the internal temperature of the battery to increase. Higher internal temperatures expand the cold temperature operating range and energy capacity utilization of the battery. As disclosed, either fixed frequency or variable frequency modulation schemes may be used to control the network.

  7. NONDESTRUCTIVE EDDY CURRENT TESTING

    DOE Patents [OSTI]

    Renken, C.J. Jr.

    1961-05-23

    An eddy current testing device is described for measuring metal continuity independent of probe-to-sample spacing. An inductance would test probe is made a leg of a variable impedance bridge and the bridge is balanced with the probe away from the sample. An a-c signal is applied across the input terminals of the bridge circuit. As the probe is brought into proximity with the metal sample, the resulting impedance change in the probe gives an output signal from the bridge whose phase angle is proportional to the sample continuity and amplitude is proportional to the probe-tosample spacing. The output signal from the bridge is applied to a compensating network where, responsive to amplitude changes from the bridge output signal, a constant phased voltage output is maintained when the sample is continuous regardless of probe-to-sample spacing. A phase meter calibrated to read changes in resistivity of the metal sample measures the phase shift between the output of the compensating network and the original a-c signal applied to the bridge.

  8. Lamp method and apparatus using multiple reflections

    DOE Patents [OSTI]

    MacLennan, Donald A.; Turner, Brian P.

    2001-01-01

    An electrodeless microwave discharge lamp includes an envelope with a discharge forming fill disposed therein which emits light, the fill being capable of absorbing light at one wavelength and re-emitting the absorbed light at a different wavelength, the light emitted from the fill having a first spectral power distribution in the absence of reflection of light back into the fill, a source of microwave energy coupled to the fill to excite the fill and cause the fill to emit light, and a reflector disposed within the microwave cavity and configured to reflect at least some of the light emitted by the fill back into the fill while allowing some light to exit, the exiting light having a second spectral power distribution with proportionately more light in the visible region as compared to the first spectral power distribution, wherein the light re-emitted by the fill is shifted in wavelength with respect to the absorbed light and the magnitude of the shift is in relation to an effective optical path length.

  9. Method for producing highly reflective metal surfaces

    DOE Patents [OSTI]

    Arnold, Jones B.; Steger, Philip J.; Wright, Ralph R.

    1983-01-01

    The invention is a novel method for producing mirror surfaces which are extremely smooth and which have high optical reflectivity. The method includes electrolessly depositing an amorphous layer of nickel on an article and then diamond-machining the resulting nickel surface to increase its smoothness and reflectivity. The machined nickel surface then is passivated with respect to the formation of bonds with electrodeposited nickel. Nickel then is electrodeposited on the passivated surface to form a layer of electroplated nickel whose inside surface is a replica of the passivated surface. The electroplated nickel layer then is separated from the passivated surface. The mandrel then may be re-passivated and provided with a layer of electrodeposited nickel, which is then recovered from the mandrel providing a second replica. The mandrel can be so re-used to provide many such replicas. As compared with producing each mirror-finished article by plating and diamond-machining, the new method is faster and less expensive.

  10. Reflection-Based Python-C++ Bindings

    SciTech Connect (OSTI)

    Generowicz, Jacek; Lavrijsen, Wim T.L.P.; Marino, Massimo; Mato, Pere

    2004-10-14

    Python is a flexible, powerful, high-level language with excellent interactive and introspective capabilities and a very clean syntax. As such, it can be a very effective tool for driving physics analysis. Python is designed to be extensible in low-level C-like languages, and its use as a scientific steering language has become quite widespread. To this end, existing and custom-written C or C++ libraries are bound to the Python environment as so-called extension modules. A number of tools for easing the process of creating such bindings exist, such as SWIG and Boost. Python. Yet, the process still requires a considerable amount of effort and expertise. The C++ language has few built-in introspective capabilities, but tools such as LCGDict and CINT add this by providing so-called dictionaries: libraries that contain information about the names, entry points, argument types, etc. of other libraries. The reflection information from these dictionaries can be used for the creation of bindings and so the process can be fully automated, as dictionaries are already provided for many end-user libraries for other purposes, such as object persistency. PyLCGDict is a Python extension module that uses LCG dictionaries, as PyROOT uses CINT reflection information, to allow /cwPython users to access C++ libraries with essentially no preparation on the users' behalf. In addition, and in a similar way, PyROOT gives ROOT users access to Python libraries.