Sample records for refineries maps illustrating

  1. Refinery Integration

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2 Leveraging existing refining infrastructure potentially reduces costs for biofuel production but we first need to understand the impacts Petroleum Refinery Picture courtesy...

  2. Wireless Critical Process Control in oil and gas refinery plants

    E-Print Network [OSTI]

    Savazzi, Stefano

    Wireless Critical Process Control in oil and gas refinery plants Stefano Savazzi1, Sergio Guardiano control in in- dustrial plants and oil/gas refineries. In contrast to wireline communication, wireless of an oil refinery is illustrated in Fig. 1: typical locations of wireless devices used for re- mote control

  3. Multiperiod Refinery Planning Optimization

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    Multiperiod Refinery Planning Optimization with Nonlinear CDU Models Abdulrahman Alattas, Advisor #12;Refinery Planning Model Development 2 Extension to Multiperiod Planning #12;3 Multiperiod Refinery: refinery configuration Determine · What crude oil to process and in which time period? · The quantities

  4. Refinery Energy Profiling Procedure

    E-Print Network [OSTI]

    Maier, R. W.

    1981-01-01T23:59:59.000Z

    This paper discusses a four-step procedure developed with support from the U.S. Department of Energy for preparing energy profiles for a refinery, for a single unit, or for an individual piece of equipment. The four steps are preparation, data...

  5. Refinery Energy Profiling Procedure

    E-Print Network [OSTI]

    Maier, R. W.

    1981-01-01T23:59:59.000Z

    This paper discusses a four-step procedure developed with support from the U.S. Department of Energy for preparing energy profiles for a refinery, for a single unit, or for an individual piece of equipment. The four steps are preparation, data...

  6. Tenneco revamps chalmette refinery

    SciTech Connect (OSTI)

    Heck, W.E.; Ragsdale, R.

    1985-01-14T23:59:59.000Z

    A major expansion and modernization project has been completed at Tenneco Oil Co.'s Chalmette, La. refinery, which is on the outskirts of New Orleans. The $559 million project, called the Chalmette heavy oil processing program, included revamps and construction of new units. These new and modified facilities have increased the crude oil capacity of the refinery by 30,000 b/d to 127,000 b/d. Gasoline and/or middle distillate output potential has also been lifted by 30,000 b/d. Numerous studies were made and economic cases worked to determine the process configuration and selection for the project. These conclusions varied depending on the raw material chosen as the feedstock (crude source). The configuration finally chosen was driven by the decision to be able to process high metals crudes from around the world.

  7. Analysis Patterns for Oil Refineries

    E-Print Network [OSTI]

    Lei Zhen; Guangzhen Shao

    We present analysis patterns to describe the structure of oil refineries. The Refinery Produc tion Unit Pattern describes the structure of units and unit groups. The Oil Storage Pattern describes the structure of tanks and tank groups. The Oil Delivery Pattern describes the structure of stations for import and export of oil. The Production Process Pattern describes the productionprocess. The audience for this paper includes analysts, designers, and programmers who are involved in developing Refinery Information Systems.

  8. Refinery Capacity Report

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1Stocks Nov-14 Dec-14Table 4.April 25, 20137a.06 2.013 1.673Refinery

  9. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for On-Highway4,1,50022,3,,,,6,1,9,1,50022,3,,,,6,1,Decade Year-0E (2001) - HouseholdshortEIA-782A andS FRecord U.S. oilRefinery1

  10. nonetrotation Illustrated

    E-Print Network [OSTI]

    Becker, Thorsten W.

    volcanoes from Siebert L, Simkin T (2002): Volcanoes of theWorld: an Illustrated Catalog of Holocene

  11. Hulett's South African Refineries Ltd.

    E-Print Network [OSTI]

    R. P. Jennings

    The improvement in the quality of raw sugars sent to Hulett's Refinery during the three seasons, 1963164 to 1965166, was the subject of a paper presented to this association last year. (1) These

  12. Encon Motivation in European Refineries

    E-Print Network [OSTI]

    Gambera, S.; Lockett, W., Jr.

    1982-01-01T23:59:59.000Z

    One essential element in a successful energy conservation or Encon program is effective motivation of employees and organizations to conserve energy. Encon motivation in our European refineries is a continuing effort that requires utilization...

  13. Integration of Nonlinear CDU Models in RefineryCDU Models in Refinery

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    Integration of Nonlinear CDU Models in RefineryCDU Models in Refinery Planning Optimization Carnegie Mellon University EWO Meeting ­ March 2011 1 #12;I t d tiIntroduction Refinery production planning models Optimizing refinery operation C d l ti Crude selection Maximizing profit; minimizing cost

  14. Retrofitting analysis of integrated bio-refineries

    E-Print Network [OSTI]

    Cormier, Benjamin R.

    2007-04-25T23:59:59.000Z

    the economic performance of fossil-based facilities can be enhanced by retrofitting and incorporation of bio-mass feedstocks. These systems can be regarded as bio-refineries or integrated fossilbio- refineries. This work presents a retrofitting analysis...

  15. A Texas Refinery Success Story

    E-Print Network [OSTI]

    Kacsur, D.

    A Texas Refinery Success Story Dennis Kacsur Spirax Sarco Common knowledge rules that maintenance is the key to long-lasting machinery performance. Yet steam traps are often left to their own devices, to fail or succeed alone. And without... steam trap programs, plants are certain to experience a high failure rate. An oil refinery in Texas was continuously experiencing a high failure rate on its 4,790-steam trap system. Finally, the steam losses were judged to be too high, and plant...

  16. Integration of Nonlinear CDU Models in Refinery

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    Integration of Nonlinear CDU Models in Refinery Planning Optimization Abdulrahman Alattas, Advisor #12;Refinery Planning Model Development Fixed-yieldModels SwingcutsModels LPPlanningModels Aggregate for the CDU #12;Planning Model Example Typical Refinery Configuration (Adapted from Aronofsky, 1978) Cat Ref

  17. Refinery Fuel Balancing with Cogeneration

    E-Print Network [OSTI]

    Passman, K. W.; Taylor, R. I.; Williams, D. E.; Emanuel, D.

    in order to tie-in during a scheduled refinery wide turnaround and to be on line during the summer 1990 operating period. The two gas turbines exhaust to two existing boilers where the oxygen in the turbine exhaust is utilized for combustion. Supplementary...

  18. Fluidized bed controls refinery emissions

    SciTech Connect (OSTI)

    Abdulally, I.F.; Kersey, B.R.

    1986-05-01T23:59:59.000Z

    In early 1983, two fluidized bed, waste heat boilers entered into service at the Ashland Petroleum Company refinery site in Ashland, Kentucky. These fluidized bed units are coupled to the regeneration end of a newly developed reduced crude conversion (RCC) process and served the purpose of reducing CO, SO/sub 2/ and NO/sub x/ emissions while recuperating waste heat from the regenerator process off gases.

  19. Refinery Production Planning: Multiperiod MINLP with Nonlinear CDU

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    1 Refinery Production Planning: Multiperiod MINLP with Nonlinear CDU Model-Rivera (2011) developed a single-period, nonlinear programing refinery planning model production, distribution, sales and inventory management1,2. The refinery

  20. Chevron Richmond Refinery Pipe Rupture and Fire Animation - Work...

    Broader source: Energy.gov (indexed) [DOE]

    Chevron Richmond Refinery Pipe Rupture and Fire Animation - Work Planning and Control is Not Chevron Richmond Refinery Pipe Rupture and Fire Animation - Work Planning and Control...

  1. Fuel-Flexible Combustion System for Refinery and Chemical Plant...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fuel-Flexible Combustion System for Refinery and Chemical Plant Process Heaters - Fact Sheet 2014 Fuel-Flexible Combustion System for Refinery and Chemical Plant Process Heaters -...

  2. Refinery burner simulation design architecture summary.

    SciTech Connect (OSTI)

    Pollock, Guylaine M.; McDonald, Michael James; Halbgewachs, Ronald D.

    2011-10-01T23:59:59.000Z

    This report describes the architectural design for a high fidelity simulation of a refinery and refinery burner, including demonstrations of impacts to the refinery if errors occur during the refinery process. The refinery burner model and simulation are a part of the capabilities within the Sandia National Laboratories Virtual Control System Environment (VCSE). Three components comprise the simulation: HMIs developed with commercial SCADA software, a PLC controller, and visualization software. All of these components run on different machines. This design, documented after the simulation development, incorporates aspects not traditionally seen in an architectural design, but that were utilized in this particular demonstration development. Key to the success of this model development and presented in this report are the concepts of the multiple aspects of model design and development that must be considered to capture the necessary model representation fidelity of the physical systems.

  3. Recent trends in refinery hydrogen production

    SciTech Connect (OSTI)

    Aitani, A.M.; Siddiqui, M.A.B. [King Fahd Univ. of Petroleum and Minerals, Dhahran (Saudi Arabia)

    1996-12-31T23:59:59.000Z

    Refiners are experiencing a rise in hydrogen requirements to improve product quality and process heavy sour crudes. Fuel reformulation has disrupted refinery hydrogen balance in two ways: more hydrogen is needed for hydroprocessing and less hydrogen is coproduced from catalytic naphtha reforming. The purpose of this paper is to review trends in maximizing refinery hydrogen production by modifications and alternatives to the conventional steam methane reforming, recovery from refinery off gases and {open_quote}across-the-fence{close_quote} hydrogen supply. 11 refs., 2 tabs.

  4. From the Woods to the Refinery

    Broader source: Energy.gov [DOE]

    Breakout Session 2DBuilding Market Confidence and Understanding II: Carbon Accounting and Woody Biofuels From the Woods to the Refinery Stephen S. Kelley, Principal and Department Head, Department of Forest Biomaterials, North Carolina State University

  5. Upgrade Your Refinery for Energy Conservation

    E-Print Network [OSTI]

    Johnnie, D. H., Jr.; Klooster, H. J.

    1983-01-01T23:59:59.000Z

    Upgrading existing refineries for efficient energy utilization imposes strict restraints upon design engineers. Present and future production requirements must be defined. Reliable operating data must be obtained from historical records and test...

  6. Making Refinery Wastewater Clean | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Refinery Wastewater Clean Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on...

  7. Retrofitting analysis of integrated bio-refineries

    E-Print Network [OSTI]

    Cormier, Benjamin R.

    2007-04-25T23:59:59.000Z

    to integrated bio-refineries. Focus is given to the problem of process modification to an existing plant by considering capacity expansion and material substitution with biomass feedstocks. Process integration studies were conducted to determine cost...

  8. Application of Pinch Technology in Refinery Retrofits

    E-Print Network [OSTI]

    Thomas, W. R.; Siegell, J. H.; Sideropoulos, T.; Robertson, J. L.; Papoulias, S. A.

    APPLICATION OF PINCH TECHNOLOGY IN REFINERY RETROFITS W. R. L. Thomas, J. H. Siegell, T. Sideropoulos, J. L. Robertson, S. A. Papoulias Exxon Research and Engineering Company Florham Park, New Jersey ABSTRACT This paper reviews... the application of pinch technology in the identification of the most attractive retrofit prospects in typical refineries. In the first part of the paper, methodology is described to identify attractive inter-unit heat integration opportunities as well...

  9. Monitoring and Management of Refinery Energy Consumption

    E-Print Network [OSTI]

    Pelham, R. O.; Moriarty, R. D.; Hudgens, P. D.

    MONITORING AND MANAGEMENT OF REFINERY ENERGY CONSUMPTION Roger O. Pelham Richard D. Moriarty Patrie D. Hudgens Profimatics, Inc. Thousand Oaks, California ABSTRACT Since 1972, the u.s. refining industry has made much progress in reduci... ng energy consumption. Lately, falling energy prices have de-emphasized the need to appropriate new capital for additional energy conservation projects. One area neglected in most refineries is the need to monitor and man age the daily use...

  10. Refinery siting workbook: appendices A and B

    SciTech Connect (OSTI)

    Not Available

    1980-07-01T23:59:59.000Z

    The objective of this effort is to develop and provide basic refinery-related information for use by state and local government officials as a basis for establishing responsible refinery siting requirements and policies consistent with the federal clean air and water standards and socio-economic concerns. The report will be organized into two volumes. The main text comprises the basic topics of physical concerns, regulatory requirements, and permitting activities, while the second volume includes the detailed appendix materials such as the applicable laws, and the necessary permits, as available and a glossary of pertinent terms. As a means to this objective, three refinery sizes, 200,000, 100,000 and 30,000 barrels per day crude charge will be discussed in technical terms. Process unit configuration will be presented which will maximize either gasoline or heating oil production with either sweet or sour crude oil feedstocks. The major issues affecting the socio-economic impact of siting the refinery in a given locale will be presented. These data will review the factors affecting the human environment and the issues that must be addressed to assess the impact that a refinery will have on a community. The key federal registrations which impact upon a refinery siting decision shall be reviewed. Summaries of these regulations and a simplified decision diagram for the air and water acts shall be presented to assist both government and refinery officials in understanding the scope of regulatory impact. All pertinent procedures required for refinery permitting shall be reviewed under the generalized headings of air, water, health and safety, land use, and miscellaneous permits. This categorization at the federal, state and local levels of government shall be used as a basis for establishing degrees of emphasis.

  11. Kyrgyzstan starts up its first refinery

    SciTech Connect (OSTI)

    McLeod, G. [Petrofac LLC, Tyler, TX (United States)

    1997-05-05T23:59:59.000Z

    The Central Asian republic of Kyrgyzstan started up its first oil refinery in October 1996. The 10,000 b/d plant is designed to produce gasoline, diesel, and mazut (heavy fuel oil) from local Kyrgyz crude. Before construction of the Jalalabad refinery, all finished petroleum products were imported from neighboring countries. Kyrgyzstan`s demand for finished products is about 40,000 b/d. The new refinery was designed and constructed by Petrofac of Tyler, Texas, on behalf of Kyrgoil Corp., Calgary. Kyrgoil is a partner with the Kyrgyz state oil company, Kyrgyzsneft, in a venture called Kyrzgyz Petroleum Co. (KPC). KPC has undertaken restoration and continued development of the oil fields in Kyrgyzstan`s Fergana basin, in addition to the refinery project. The company also has marketing rights for finished products within Kyrgyzstan. The refinery comprises: a hydroskimming (atmospheric distillation) section, diesel steam stripping, gasoline blending, and utilities and off-sites, including steam generation, power generation, tank farm, truck and rail tank-car loading and unloading facilities, crude inlet pipeline, high-voltage power line, substation, air compression, laboratory, and maintenance facilities.

  12. Steam System Management Program Yields Fuel Savings for Refinery

    E-Print Network [OSTI]

    Gaines, L. D.; Hagan, K. J.

    1983-01-01T23:59:59.000Z

    The Phillips refinery at Borger, Texas, determined the need to develop a utility monitoring system. Shortly after this commitment was made, the refinery was introduced to a flowsheet modeling program that could be used to model and optimize steam...

  13. Software communications integrated into refinery system

    SciTech Connect (OSTI)

    Goodpaster, R.; Kennedy, J.P.

    1989-01-16T23:59:59.000Z

    Ashland Oil Co. is integrating software communications, using real-time data, into the computerized information system at its Catlettsburg, Ky., refinery. The Ashland real-time information system (Artis) was designed to improve timeliness and accuracy of yield accounting to the refinery, and to standardize software communications between applications. With the system, real-time data are collected in a central data server and used to feed normal data reconciliation software for validation. This part of the system has been successfully implemented. Standardization of software communications is still under design, but most of the communication paths have been defined because a highly evolved information system already exists at the refinery. And efforts are under way to integrate information from the process to optimization.

  14. Global Optimization for Scheduling Refinery Crude Oil Operations Ramkumar Karuppiaha

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    Global Optimization for Scheduling Refinery Crude Oil Operations Ramkumar Karuppiaha , Kevin C at the front-end of a petroleum refinery. The model relies on a continuous time representation making use-412-268-7139. Email address: grossmann@cmu.edu (I.E. Grossmann) #12;2 Keywords: Refinery scheduling; Nonconvex MINLP

  15. Determinants of HR Effectiveness and Refinery Performance

    E-Print Network [OSTI]

    Blaine Mccormick; Gary C. Mcmahan; W. Scott Sherman; Patrick M. Wright; Patrick M. Wright; Gary C. Mcmahan; Blaine Mccormick; W. Scott Sherman

    This paper has not undergone formal review or approval of the faculty of the ILR School. It is intended to make results of Center research available to others interested in preliminary form to encourage discussion and suggestions. Page 1SHRM and Refinery Performance WP 97-16 Strategy, Core Competence and HR Involvement as

  16. Refinery siting workbook: appendices C to O

    SciTech Connect (OSTI)

    Not Available

    1980-07-01T23:59:59.000Z

    Applicable laws and permits available for the selection and building of petroleum refineries are enclosed. A glossary of pertinent terms is also included. References related to the National Environmental Policy Act, the Clean Air Act, the Federal Water Pollution Control Act, Resource Conservation and Recovery Act, Toxic Substance Control Act, and Wetlands and Coastal Zone are included. Permit information is also presented. (DC)

  17. Flare Gas Recovery in Shell Canada Refineries

    E-Print Network [OSTI]

    Allen, G. D.; Wey, R. E.; Chan, H. H.

    1983-01-01T23:59:59.000Z

    the flow properties for compressor selection? What controls should be incorporated? How much operator and maintenance effort will be required for safe, efficient operation? What kind of process and hardware problems should be watched for? When...? This paper will touch on all these issues. SYSTEM CONFIGURATION A schematic of a typical refinery flare gas recovery facility is shown in Figure I. The facilities include the following pieces of equipment: - compressor suction drum - compressor set...

  18. Opportunities for Biorenewables in Oil Refineries

    SciTech Connect (OSTI)

    Marker, T.L.

    2005-12-19T23:59:59.000Z

    Abstract: The purpose of this study was to evaluate the potential for using biorenewable feedstocks in oil refineries. Economic analyses were conducted, with support from process modeling and proof of principle experiments, to assess a variety of potential processes and configurations. The study considered two primary alternatives: the production of biodiesel and green diesel from vegetable oils and greases and opportunities for utilization of pyrolysis oil. The study identified a number of promising opportunities for biorenewables in existing or new refining operations.

  19. Projection and Reaction for Decision Support in Refineries: Combining Multiple Theories

    E-Print Network [OSTI]

    Krebsbach, Kurt D.

    Projection and Reaction for Decision Support in Refineries: Combining Multiple Theories Kurt D system to provide decision support for refinery operations personnel (Krebsbach & Musliner 1997; Musliner to provide sufficiently flexible decision support in complex environments. Background: Refinery Control

  20. U.S. Refinery Net Production

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122Commercial602 1,397 125 Q 69 0.11 0.0949,797.6(MillionRefinery3,028,561- - -

  1. Firing Excess Refinery Butane in Peaking Gas Turbines

    E-Print Network [OSTI]

    Pavone, A.; Schreiber, H.; Zwillenberg, M.

    normal butane production, which will reduce refinery normal butane value and price. Explored is an opportunity for a new use for excess refinery normal butane- as a fuel for utility peaking gas turbines which currently fire kerosene and #2 oil. Our paper...

  2. Firing Excess Refinery Butane in Peaking Gas Turbines

    E-Print Network [OSTI]

    Pavone, A.; Schreiber, H.; Zwillenberg, M.

    1989-01-01T23:59:59.000Z

    normal butane production, which will reduce refinery normal butane value and price. Explored is an opportunity for a new use for excess refinery normal butane- as a fuel for utility peaking gas turbines which currently fire kerosene and #2 oil. Our paper...

  3. Reformulated gasoline: Costs and refinery impacts

    SciTech Connect (OSTI)

    Hadder, G.R.

    1994-02-01T23:59:59.000Z

    Studies of reformulated gasoline (RFG) costs and refinery impacts have been performed with the Oak Ridge National Laboratory Refinery Yield Model (ORNL-RYM), a linear program which has been updated to blend gasolines to satisfy emissions constraints defined by preliminary complex emissions models. Policy makers may use the reformulation cost knee (the point at which costs start to rise sharply for incremental emissions control) to set emissions reduction targets, giving due consideration to the differences between model representations and actual refining operations. ORNL-RYM estimates that the reformulation cost knee for the US East Coast (PADD I) is about 15.2 cents per gallon with a 30 percent reduction of volatile organic compounds (VOCs). The estimated cost knee for the US Gulf Coast (PADD III) is about 5.5 cents per gallon with a VOC reduction of 35 percent. Reid vapor pressure (RVP) reduction is the dominant VOC reduction mechanism. Even with anti-dumping constraints, conventional gasoline appears to be an important sink which permits RFG to be blended with lower aromatics and sulfur contents in PADD III. In addition to the potentially large sensitivity of RFG production to different emissions models, RFG production is sensitive to the non-exhaust VOC share assumption for a particular VOC model. ORNL-RYM has also been used to estimate the sensitivity of RFG production to the cost of capital; to the RVP requirements for conventional gasoline; and to the percentage of RFG produced in a refining region.

  4. Maps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn12electronEnergy ManufacturingMapping theMappingMaps Sign

  5. Nigerian refineries strive for product balance

    SciTech Connect (OSTI)

    Obuasi, P.A.

    1985-06-17T23:59:59.000Z

    This article discusses the growth patterns of the Nigerian refining industry. Production and consumption are expected to follow the pattern of consumption of fuel products by the domestic market, Presently, however, production and consumption are not evenly balanced for most fuel products, and non-fuel products are domestically consumed but not produced. Some progress has been made in the effort to match production and consumption of fuel products. But the progress that would have been made to balance non-fuel products has been nullified by 50% of the Daduna refinery being idle. This is due to problems associated with importation of heavy crude oil into Nigeria and also a weak market for asphalt in Nigeria.

  6. RCC complex now cornerstone of Ashland refinery

    SciTech Connect (OSTI)

    Busch, L.E.; Hettinger, W.P.; Krock, R.P.

    1984-12-10T23:59:59.000Z

    Performance of the first grassroots RCC process unit during its initial 1 1/2 years of operation at Ashland's principal refinery at Catlettsburg, Ky., has confirmed the commercial viability and process advantages of this new technology for heavy oil conversion. The unit has successfully processed untreated atmospheric residuum having Ramsbottom carbon content as high as 7.1 wt%, and metals contamination up to 70 ppm nickel plus vanadium into high yields of transportation and distillate fuels and other light products. The startup of this 40,000 b/d facility in March 1983 brought to fruition nearly 8 years of diligent process development and a 3-year accelerated engineering and construction program. The commercial unit was expressly designed and built to exploit process, hardware, and catalyst innovations flowing from the development effort and demonstrated to be especially applicable to converting long resids. The unit has generally met and exceeded technical expectations.

  7. Saber's heavy oil cracking refinery project

    SciTech Connect (OSTI)

    Benefield, C.S.; Glasscock, W.L.

    1983-03-01T23:59:59.000Z

    Perhaps more than any other industry, petroleum refining has been subjected to the radical swings in business and political climates of the past several decades. Because of the huge investments and long lead times to construct refining facilities, stable government policies, predictable petroleum prices, secure feedstock supplies and markets, and reliable cost estimates are necessary ingredients to effectively plan new refinery projects. However, over the past ten years the political and economic climates have provided anything but these conditions. Yet, refiners have demonstrated a willingness to undertake risks by continuing to expand and modernize their refineries. The refining business -- just as most businesses -- responds to economic incentives. These incentives, when present, result in new technology and capacity additions. In the 1940's, significant technology advances were commercialized to refine higher-octane motor gasolines. Such processes as continuous catalytic cracking (Houdry Process Corporation), fluid catalytic cracking (Standard Oil Development Company), HF alkylation (UOP and Phillips Petroleum Company), and catalytic reforming (UOP) began to supply a growing gasoline market, generated from the war effort and the ever increasing numbers of automobiles on the road. The post-war economy of the 1950's and 1960's further escalated demand for refined products, products which had to meet higher performance specifications and be produced from a wider range of raw materials. The refining industry met the challenge by introducing hydro-processing technology, such as hydrocracking developed in 1960. But, the era must be characterized by the large crude processing capacity additions, required to meet demand from the rapidly expanding U.S. economy. In 1950, refining capacity was 6.2 million BPD. By 1970, capacity had grown to 11.9 million BPD, an increase of 91%.

  8. Integrating NABC bio-oil intermediates into the petroleum refinery

    Broader source: Energy.gov [DOE]

    Breakout Session 2: Frontiers and Horizons Session 2D: Working Together: Conventional Refineries and Bio-Oil R&D Technologies Thomas Foust, Director, National Bioenergy Center, National Renewable Energy Laboratory

  9. Implementing an Energy Management Strategy for a Houston Refinery

    E-Print Network [OSTI]

    Wood, S. C.; Agrawal, R. K.; Canon, D.

    and maintained energy management program translates to PROFIT added directly to the BOTTOM LINE. Woodward-Clyde Consultants (WCC) recently implemented and energy management program at the Lyondell-Citgo Refinery in Houston, Texas. The basis of the program...

  10. Refinery Energy Conservation Experience with Enhanced Surface Reboilers

    E-Print Network [OSTI]

    Ragi, E. G.; O'Neill, P. S.

    1981-01-01T23:59:59.000Z

    Examples of refinery services where existing reboilers were retubed or replaced with enhanced High Flux tubing to better utilize or conserve energy are reported. (1) Retubing an existing toluene column reboiler permitted the use of low cost 115...

  11. Gas Separation Membrane Use in the Refinery and Petrochemical Industries

    E-Print Network [OSTI]

    Vari, J.

    Membranes have gained commercial acceptance as proven methods to recover valuable gases from waste gas streams. This paper explores ways in which gas separation membranes are used in the refinery and petrochemical industries to recover and purify...

  12. Petroleum Refinery Catalytic Reforming -- Cutting High Energy Costs

    E-Print Network [OSTI]

    Viar, W. L.

    1979-01-01T23:59:59.000Z

    . It is essential that the operation and maintenance of these furnaces be optimized to minimize production costs. This paper describes the performance testing and evaluation of a set of ten refinery furnaces used to thermally drive several reforming reactors...

  13. Optimization of Steam Network in Tehran Oil Refinery

    E-Print Network [OSTI]

    Khodaie, H.; Nasr, M. R. J.

    2008-01-01T23:59:59.000Z

    Dominated energy crisis in the world dictates to reduce energy consumption and identify energy saving opportunities in large and complex industries especially in oil refining industry. In this paper, Tehran oil refinery is considered as a proper...

  14. Obstacles and Opportunity: Turbine Motorization in Refineries Today

    E-Print Network [OSTI]

    Feng, Hua; Liu, Jinghing; Liu, Xiang; Ahmad, Mushtaq; Deng, Alan

    2012-01-01T23:59:59.000Z

    Steam turbines have been widely used in oil refineries for driving pumps, compressors and other rotary machines. However, in recent years, the authors of this paper have seen substantial turbine motorization projects completed or being planned...

  15. Obstacles and Opportunity: Turbine Motorization in Refineries Today

    E-Print Network [OSTI]

    Feng, Hua; Liu, Jinghing; Liu, Xiang; Ahmad, Mushtaq; Deng, Alan

    2012-01-01T23:59:59.000Z

    Steam turbines have been widely used in oil refineries for driving pumps, compressors and other rotary machines. However, in recent years, the authors of this paper have seen substantial turbine motorization projects completed or being planned...

  16. Steps taken at Malelane refinery to improve refined sugar quality

    E-Print Network [OSTI]

    M Moodley; Pm Schorn

    1997-01-01T23:59:59.000Z

    The refinery at Malelane has in the past produced refined sugar for the consumer market. A decision was taken by the management of Transvaal Sugar (TSB) to produce a quality of refined sugar that would also be acceptable to the industrial and the export markets. The processes that were evaluated and implemented at the Malelane refinery during the past three seasons to achieve this objective, are described.

  17. Interfacing US Census map files with statistical graphics software: Application and use in epidemiology

    SciTech Connect (OSTI)

    Rizzardi, M.; Mohr, M.S.; Merrill, D.W.; Selvin, S. (Lawrence Berkeley Lab., CA (United States) California Univ., Berkeley, CA (United States). School of Public Health)

    1993-03-01T23:59:59.000Z

    In 1990, the United States Bureau of the Census released detailed geographic map files known as TIGER/Line (Topologically Integrated Geographic Encoding and Referencing). The TIGER files, accessible through purchase or Federal repository libraries, contain 24 billion characters of data describing various geographic features including coastlines, hydrography, transportation networks, political boundaries, etc. covering the entire United States. Many of these physical features are of potential interest in epidemiological case studies. Unfortunately, the TIGER database only provides raw alphanumeric data; no utility software, graphical or otherwise, is included. Recently, the S statistical software package has been extended to include a map display function. The map function augments S's high-level approach toward statistical analysis and graphical display of data. Coupling this statistical software with the map database developed for US Census data collection will facilitate epidemiological research. We discuss the technical background necessary to utilize the TIGER database for mapping with S. Two types of S maps, segment-based and polygon-based, are discussed along with methods to construct them from TIGER data. Polygon-based maps are useful for displaying regional statistical data; e.g., disease rates or incidence at the census tract level. Segment-based maps are easier to assemble and appropriate if the data are not regionalized. Census tract data of AIDS incidence in San Francisco (CA) and lung cancer case locations relative to petrochemical refinery sites in Contra Costa County (CA) are used to illustrate the methods and potential uses of interfacing the TIGER database with S.

  18. Maps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > The EnergyCenter (LMI-EFRC) -Publications &Tsao ·Resources » Maps

  19. Assessment of coal liquids as refinery feedstocks

    SciTech Connect (OSTI)

    Zhou, P.

    1992-02-01T23:59:59.000Z

    The R D of direct coal liquefaction has reached such a stage that current two-stage processes can produce coal liquids with high yields and improved quality at a reasonable cost. To fully realize the potential value, these coal liquids should be refined into high-value liquid transportation fuels. The purpose of this study is to assess coal liquids as feedstocks to be processed by modern petroleum refining technologies. After the introduction, Section 2.0 summarizes ASTM specifications for major transportation fuels: gasoline, jet fuel, and diesel fuel, which serve as a target for coal-liquid refining. A concise description of modern refining processes follows with an emphasis on the requirements for the raw materials. These provide criteria to judge the quality of coal liquids as a refinery feedstock for the production of marketable liquid fuels. Section 3.0 surveys the properties of coal liquids produced by various liquefaction processes. Compared with typical petroleum oils, the current two-stage coal liquids are: Light in boiling range and free of resids and metals; very low in sulfur but relatively high in oxygen; relatively low in hydrogen and high in cyclics content; and essentially toxicologically inactive when end point is lower than 650[degrees]F, particularly after hydroprocessing. Despite these characteristics, the coal liquids are basically similar to petroleum. The modern refining technology is capable of processing coal liquids into transportation fuels meeting all specifications, and hydroprocessinq is obviously the major tool. The important point is the determination of a reasonable product slate and an appropriate refining scheme.

  20. Assessment of coal liquids as refinery feedstocks

    SciTech Connect (OSTI)

    Zhou, P.

    1992-02-01T23:59:59.000Z

    The R&D of direct coal liquefaction has reached such a stage that current two-stage processes can produce coal liquids with high yields and improved quality at a reasonable cost. To fully realize the potential value, these coal liquids should be refined into high-value liquid transportation fuels. The purpose of this study is to assess coal liquids as feedstocks to be processed by modern petroleum refining technologies. After the introduction, Section 2.0 summarizes ASTM specifications for major transportation fuels: gasoline, jet fuel, and diesel fuel, which serve as a target for coal-liquid refining. A concise description of modern refining processes follows with an emphasis on the requirements for the raw materials. These provide criteria to judge the quality of coal liquids as a refinery feedstock for the production of marketable liquid fuels. Section 3.0 surveys the properties of coal liquids produced by various liquefaction processes. Compared with typical petroleum oils, the current two-stage coal liquids are: Light in boiling range and free of resids and metals; very low in sulfur but relatively high in oxygen; relatively low in hydrogen and high in cyclics content; and essentially toxicologically inactive when end point is lower than 650{degrees}F, particularly after hydroprocessing. Despite these characteristics, the coal liquids are basically similar to petroleum. The modern refining technology is capable of processing coal liquids into transportation fuels meeting all specifications, and hydroprocessinq is obviously the major tool. The important point is the determination of a reasonable product slate and an appropriate refining scheme.

  1. VarPetrRef 1 VARIETY AND THE EVOLUTION OF REFINERY PROCESSING

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    VarPetrRef 1 VARIETY AND THE EVOLUTION OF REFINERY PROCESSING Phuong NGUYEN*, Pier-Paolo SAVIOTTI, refinery processes, variety, niche theory, Weitzman measure. JEL classification : L15 -L93 -O3 1

  2. STAMP-Based Analysis of a Refinery Overflow Accident Nancy Leveson, Margaret Stringfellow, and John Thomas

    E-Print Network [OSTI]

    Leveson, Nancy

    1 STAMP-Based Analysis of a Refinery Overflow Accident Nancy Leveson, Margaret Stringfellow, and John Thomas As an example of STAMP, we have taken an accident report produced for a real refinery

  3. Opportunities for Biomass-Based Fuels and Products in a Refinery...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Opportunities for Biomass-Based Fuels and Products in a Refinery Opportunities for Biomass-Based Fuels and Products in a Refinery Breakout Session 2: Frontiers and Horizons Session...

  4. Gross Error Detection in Chemical Plants and Refineries for On-Line Optimization

    E-Print Network [OSTI]

    Pike, Ralph W.

    Gross Error Detection in Chemical Plants and Refineries for On-Line Optimization Xueyu Chen, Derya) British Petroleum Applications mainly crude units in refineries and ethylene plants #12;Companies

  5. Mixed reality training application for an oil refinery: user requirements

    E-Print Network [OSTI]

    Marjaana Trskbck

    2004-01-01T23:59:59.000Z

    Introducing mixed reality (MR) into safety-critical environment like oil refinery is difficult, since the environment and organization lays demanding restrictions for the application. In order to develop usable and safe MR application, we need to study the context of use and derive user requirements from it. This paper describes the user requirements for an MR based oil refinery training tool. The application is aimed to train employees of a specific process unit in the refinery. Training is currently done mainly in a classroom and on-site only when the process is closed down. On-site training is necessary, but expensive and rarely possible. The use of mixed reality offers a way to train employees on-site while the process is running. Users can virtually see inside the columns and can modify virtually the process..

  6. Potentials for Fuel Cells in Refineries and Chlor-Alkali Plants

    E-Print Network [OSTI]

    Altseimer, J. H.; Roach, F.

    POTENTIALS FOR FUEL CELLS IN REFINERIES AND CHLOR-ALKALI PLANTS John H. Altseimer and Fred Roach Los Alamos National Laboratory Los Alamos, New Mexico ABSTRACT The market potentials for fuel cell cogenera tion systems in petroleum refineries... in the production process are favorable to the use of fuel cells. The energy use in refineries is steam intensive with the required steam pressures ranging from approximately 15 to 650 psig. The near-term use of fuel cell cogeneration in refineries...

  7. Ashland outlines $261 million in refinery unit construction

    SciTech Connect (OSTI)

    Not Available

    1992-08-31T23:59:59.000Z

    This paper reports that Ashland Petroleum Co. has spelled out $261 million in projects completed, under way, or planned to produce cleaner fuel and further reduce emissions at two U.S. refineries. The company: Started up at $13 million pollution control system at its 213,400 b/cd Catlettsburg, Ky., plant. Started construction on six projects at its 67,100 b/cd St. Paul Park, Minn., refinery that will cost about $114 million and enable the plant to produce cleaner burning diesel fuel and further reduce emissions.

  8. GDP Formulation of a segmented CDU Swing Cut Model for Refinery Planning

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    1 GDP Formulation of a segmented CDU Swing Cut Model for Refinery Planning (Performance Analysis. Grossmann #12;2 Motivation · Refinery planning is an active area in process systems that strongly relies HF REFINERY FUEL RG LPG LN HN KN GO1 GO2 VGO VR1 VR2 C1 LPG LIGHT NAPHTHA PMS 98 MOGAS 95 JET FUEL

  9. The effects of soil type and chemical treatment on nickel speciation in refinery enriched soils

    E-Print Network [OSTI]

    The effects of soil type and chemical treatment on nickel speciation in refinery enriched soils Aerial deposition of Ni from a refinery in Port Colborne, Ontario, Canada has resulted in the enrichment in vegetable crops grown in the vicinity of the refinery. Conversely, dolomitic lime- stone additions resulted

  10. Optimal Industrial Load Control in Smart Grid: A Case Study for Oil Refineries

    E-Print Network [OSTI]

    Mohsenian-Rad, Hamed

    Optimal Industrial Load Control in Smart Grid: A Case Study for Oil Refineries Armen Gholian, Hamed units finish their operations. Considering an oil refinery industry as an example, we not only identify Terms­Demand response, load management, manufactur- ing industries, oil refineries, optimal scheduling

  11. Treatability studies on different refinery wastewater samples using high-throughput microbial electrolysis cells (MECs)

    E-Print Network [OSTI]

    Treatability studies on different refinery wastewater samples using high-throughput microbial, University Park, PA 16802, USA h i g h l i g h t s Refinery wastewaters were tested as fuels in MECs effective for treatment or pre-treatment of some refinery wastewaters. The best way to start up MECs

  12. Wireless channel characterization and modeling in oil and gas refinery plants

    E-Print Network [OSTI]

    Savazzi, Stefano

    Wireless channel characterization and modeling in oil and gas refinery plants Stefano Savazzi1 modeling approach is validated by experimental measurements in two oil refinery sites using industry and gas refinery sites are characterized by harsh environments where radio signals are prone to blockage

  13. Integration of Refinery Planning and Crude-Oil Scheduling using Lagrangian Decomposition

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    Integration of Refinery Planning and Crude-Oil Scheduling using Lagrangian Decomposition Sylvain: refinery planning and crude-oil operations scheduling. The proposed approach consists of using Lagrangian-study and a larger refinery problem show that the Lagrangian decomposition algorithm is more robust than the other

  14. Treating refinery wastewaters in microbial fuel cells using separator electrode assembly or spaced electrode configurations

    E-Print Network [OSTI]

    Treating refinery wastewaters in microbial fuel cells using separator electrode assembly or spaced 2013 Available online 5 November 2013 Keywords: Microbial fuel cells Refinery wastewater Biodegradability Separator electrode assembly a b s t r a c t The effectiveness of refinery wastewater (RW

  15. JANUARY 2007 THE BP U.S. REFINERIES INDEPENDENT SAFETY REVIEW PANEL

    E-Print Network [OSTI]

    Leveson, Nancy

    OF JANUARY 2007 THE REPORT THE BP U.S. REFINERIES INDEPENDENT SAFETY REVIEW PANEL #12;From left;PANEL STATEMENT The B.P. U.S. Refineries Independent Safety Review Panel i Process safety accidents can be prevented. On March 23, 2005, the BP Texas City refinery experienced a catastrophic process accident

  16. Perception of an emergency Situation by operators in an oil refinery L.Pioche&J.RPineau

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Perception of an emergency Situation by operators in an oil refinery L.Pioche&J.RPineau Institut de the operators' behaviour during an emergency Situation m an oil refinery. The aim ofthis stage the general objective is to analyse the operators' behaviour during an emergency Situation in an oil refinery

  17. Energy efficiency improvement and cost saving opportunities forpetroleum refineries

    SciTech Connect (OSTI)

    Worrell, Ernst; Galitsky, Christina

    2005-02-15T23:59:59.000Z

    The petroleum refining industry in the United States is the largest in the world, providing inputs to virtually any economic sector,including the transport sector and the chemical industry. The industry operates 146 refineries (as of January 2004) around the country,employing over 65,000 employees. The refining industry produces a mix of products with a total value exceeding $151 billion. Refineries spend typically 50 percent of cash operating costs (i.e., excluding capital costs and depreciation) on energy, making energy a major cost factor and also an important opportunity for cost reduction. Energy use is also a major source of emissions in the refinery industry making energy efficiency improvement an attractive opportunity to reduce emissions and operating costs. Voluntary government programs aim to assist industry to improve competitiveness through increased energy efficiency and reduced environmental impact. ENERGY STAR (R), a voluntary program managed by the U.S. Environmental Protection Agency, stresses the need for strong and strategic corporate energy management programs. ENERGY STAR provides energy management tools and strategies for successful corporate energy management programs. This Energy Guide describes research conducted to support ENERGY STAR and its work with the petroleum refining industry.This research provides information on potential energy efficiency opportunities for petroleum refineries. This Energy Guide introduces energy efficiency opportunities available for petroleum refineries. It begins with descriptions of the trends, structure, and production of the refining industry and the energy used in the refining and conversion processes. Specific energy savings for each energy efficiency measure based on case studies of plants and references to technical literature are provided. If available, typical payback periods are also listed. The Energy Guide draws upon the experiences with energy efficiency measures of petroleum refineries worldwide. The findings suggest that given available resources and technology, there are opportunities to reduce energy consumption cost-effectively in the petroleum refining industry while maintaining the quality of the products manufactured. Further research on the economics of the measures, as well as the applicability of these to individual refineries, is needed to assess the feasibility of implementation of selected technologies at individual plants.

  18. The MTBE solution: Octanes, technology, and refinery profitability

    SciTech Connect (OSTI)

    Lander, E.P.; Hubbard, J.N.; Smith, L.A.

    1983-03-01T23:59:59.000Z

    This paper has been developed to provide refiners with business decision insight regarding the production of methyl tertiary butyl ether (MTBE) from refinery - (FCC) produced isobutylene. The driving forces making MTBE an attractive investment are examined with regard to the increasing demand for higher octane unleaded gasolines. The decision to proceed with MTBE production depends on the profitability of such an investment and the refiner's ability to meet market demands using available processing equipment, refinery produced streams and external feedstocks. The factors affecting this decision are analyzed in this paper and include: industry ability to meet rising octane demand; profit potential realized by diverting isobutylene to MTBE; availability of technology for producing MTBE; and investment and operating costs required to produce MTBE. Chemical Research and Licensing and NEOCHEM have developed a simple, low cost process to produce MTBE, reducing the excessive equipment and high operating costs that were associated with conventional MTBE designs. The economics and process benefits of installing a CRandL/NEOCHEM MTBE process are examined within the framework of a generalized medium-sized refinery configuration.

  19. Controlling Silver Dust and Fumes at Mine Refinery

    E-Print Network [OSTI]

    R. A. Haney; M. P. Valoski

    ABSTRACT: As part of the refining of gold and silver molten metal, silver dust and fumes are released into the atmosphere. The Mine Safety and Health Administration (MSHA) enforces an 8-hour, equivalent Time Weighted Average concentration limit for silver dust and fumes of 10 g/m 3. MSHA initiated a program to assess the controls that were being used to control silver dust and fume exposure. Refineries were visited at six mines. The layout of each refinery and the controls used varied at each refinery. At each operation, personal and area silver fume and dust samples were collected to assess worker exposures and to determine sources of fume. Primary source of silver dust and fume exposure was the pouring of molten metal from the furnace. Secondary sources of exposure included: precipitate mixing, bar cooling, and housekeeping. Guidelines were developed addressing housekeeping, exhaust ventilation, general ventilation, administrative controls, and system monitoring. In most cases, housekeeping and general ventilation were adequate; however, the exhaust ventilation systems needed to be improved. 1 INRODUCTION Silver dust and fumes become airborne during the refining step of producing gold and silver. The dust

  20. Refinery gas waste heat energy conversion optimization in gas turbines

    SciTech Connect (OSTI)

    Rao, A.D.; Francuz, D.J.; West, E.W. [Fluor Daniel, Inc., Irvine, CA (United States)

    1996-12-31T23:59:59.000Z

    Utilization of refinery fuel gas in gas turbines poses special challenges due to the combustion characteristics of the fuel gas which contains significant concentrations of hydrogen. Proper modifications to the combustion system of the existing gas turbines are required in order to combust such fuel gas streams in gas turbines while minimizing the NO{sub x} emissions. A novel approach to the utilization of this hydrogen bearing fuel gas in gas turbines consists of humidifying the fuel gas with water vapor by direct contact with hot water in a counter-current column, the feed water to the humidifier being first circulated through the refinery to recover waste heat. The refinery waste heat produces additional motive fluid with a result that the waste heat is converted to power in the gas turbine. Furthermore, the water vapor introduced into the fuel gas reduces the NO{sub x} formation and increases the gas turbine output, while the hydrogen present in the fuel gas provides the flame stability required when combusting a fuel gas containing a large concentration of water vapor.

  1. University of Maine Integrated Forest Product Refinery (IFPR) Technology Research

    SciTech Connect (OSTI)

    Pendse, Hemant P.

    2010-11-23T23:59:59.000Z

    This project supported research on science and technology that forms a basis for integrated forest product refinery for co-production of chemicals, fuels and materials using existing forest products industry infrastructure. Clear systems view of an Integrated Forest Product Refinery (IFPR) allowed development of a compelling business case for a small scale technology demonstration in Old Town ME for co-production of biofuels using cellulosic sugars along with pulp for the new owners of the facility resulting in an active project on Integrated Bio-Refinery (IBR) at the Old Town Fuel & Fiber. Work on production of advanced materials from woody biomass has led to active projects in bioplastics and carbon nanofibers. A lease for 40,000 sq. ft. high-bay space has been obtained to establish a Technology Research Center for IFPR technology validation on industrially relevant scale. UMaine forest bioproducts research initiative that began in April 2006 has led to establishment of a formal research institute beginning in March 2010.

  2. GDP Formulation of a segmented CDU Swing Cut Model for Refinery Planning

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    1 GDP Formulation of a segmented CDU Swing Cut Model for Refinery Planning Department of Chemical · Refinery planning is an active area in process systems that strongly relies on the accuracy of the CDU REFINERY FUEL RG LPG LN HN KN GO1 GO2 VGO VR1 VR2 C1 LPG LIGHT NAPHTHA PMS 98 MOGAS 95 JET FUEL AGO HGO HFO

  3. Updated estimation of energy efficiencies of U.S. petroleum refineries.

    SciTech Connect (OSTI)

    Palou-Rivera, I.; Wang, M. Q. (Energy Systems)

    2010-12-08T23:59:59.000Z

    Evaluation of life-cycle (or well-to-wheels, WTW) energy and emission impacts of vehicle/fuel systems requires energy use (or energy efficiencies) of energy processing or conversion activities. In most such studies, petroleum fuels are included. Thus, determination of energy efficiencies of petroleum refineries becomes a necessary step for life-cycle analyses of vehicle/fuel systems. Petroleum refinery energy efficiencies can then be used to determine the total amount of process energy use for refinery operation. Furthermore, since refineries produce multiple products, allocation of energy use and emissions associated with petroleum refineries to various petroleum products is needed for WTW analysis of individual fuels such as gasoline and diesel. In particular, GREET, the life-cycle model developed at Argonne National Laboratory with DOE sponsorship, compares energy use and emissions of various transportation fuels including gasoline and diesel. Energy use in petroleum refineries is key components of well-to-pump (WTP) energy use and emissions of gasoline and diesel. In GREET, petroleum refinery overall energy efficiencies are used to determine petroleum product specific energy efficiencies. Argonne has developed petroleum refining efficiencies from LP simulations of petroleum refineries and EIA survey data of petroleum refineries up to 2006 (see Wang, 2008). This memo documents Argonne's most recent update of petroleum refining efficiencies.

  4. (Data in kilograms of germanium content unless otherwise noted) Domestic Production and Use: The value of domestic refinery production of germanium, based upon an estimated

    E-Print Network [OSTI]

    and Use: The value of domestic refinery production of germanium, based upon an estimated 2004 producer refinery in Utica, NY, produced germanium tetrachloride for optical fiber production. Another refinery

  5. Feasibility study report for the Imperial Valley Ethanol Refinery: a 14. 9-million-gallon-per-year ethanol synfuel refinery utilizing geothermal energy

    SciTech Connect (OSTI)

    Not Available

    1981-03-01T23:59:59.000Z

    The construction and operation of a 14,980,000 gallon per year fuel ethanol from grain refinery in the Imperial Valley of California is proposed. The Imperial Valley Ethanol Refinery (refinery) will use hot geothermal fluid from geothermal resources at the East Mesa area as the source of process energy. In order to evaluate the economic viability of the proposed Project, exhaustive engineering, cost analysis, and financial studies have been undertaken. This report presents the results of feasibility studies undertaken in geothermal resource, engineering, marketing financing, management, environment, and permits and approvals. The conclusion of these studies is that the Project is economically viable. US Alcohol Fuels is proceeding with its plans to construct and operate the Refinery.

  6. Interfacing US Census map files with statistical graphics software: Application and use in epidemiology. Revision 1

    SciTech Connect (OSTI)

    Rizzardi, M.; Mohr, M.S.; Merrill, D.W.; Selvin, S. [Lawrence Berkeley Lab., CA (United States)]|[California Univ., Berkeley, CA (United States). School of Public Health

    1993-03-01T23:59:59.000Z

    In 1990, the United States Bureau of the Census released detailed geographic map files known as TIGER/Line (Topologically Integrated Geographic Encoding and Referencing). The TIGER files, accessible through purchase or Federal repository libraries, contain 24 billion characters of data describing various geographic features including coastlines, hydrography, transportation networks, political boundaries, etc. covering the entire United States. Many of these physical features are of potential interest in epidemiological case studies. Unfortunately, the TIGER database only provides raw alphanumeric data; no utility software, graphical or otherwise, is included. Recently, the S statistical software package has been extended to include a map display function. The map function augments S`s high-level approach toward statistical analysis and graphical display of data. Coupling this statistical software with the map database developed for US Census data collection will facilitate epidemiological research. We discuss the technical background necessary to utilize the TIGER database for mapping with S. Two types of S maps, segment-based and polygon-based, are discussed along with methods to construct them from TIGER data. Polygon-based maps are useful for displaying regional statistical data; e.g., disease rates or incidence at the census tract level. Segment-based maps are easier to assemble and appropriate if the data are not regionalized. Census tract data of AIDS incidence in San Francisco (CA) and lung cancer case locations relative to petrochemical refinery sites in Contra Costa County (CA) are used to illustrate the methods and potential uses of interfacing the TIGER database with S.

  7. The Energy Minimization Method: A Multiobjective Fitness Evaluation Technique and Its Application to the Production Scheduling in a Petroleum Refinery

    E-Print Network [OSTI]

    Coello, Carlos A. Coello

    to the Production Scheduling in a Petroleum Refinery Mayron Rodrigues de Almeida Slvio Hamacher Industrial applied to production scheduling of a petroleum refinery. The experimental results are presented of the method when applied to the production scheduling in a petroleum refinery. Section 5 discusses

  8. High-Octane Fuel from Refinery Exhaust Gas: Upgrading Refinery Off-Gas to High-Octane Alkylate

    SciTech Connect (OSTI)

    None

    2009-12-01T23:59:59.000Z

    Broad Funding Opportunity Announcement Project: Exelus is developing a method to convert olefins from oil refinery exhaust gas into alkylate, a clean-burning, high-octane component of gasoline. Traditionally, olefins must be separated from exhaust before they can be converted into another source of useful fuel. Exelus process uses catalysts that convert the olefin to alkylate without first separating it from the exhaust. The ability to turn up to 50% of exhaust directly into gasoline blends could result in an additional 46 million gallons of gasoline in the U.S. each year.

  9. BFA in ILLUSTRATION (488035) MAP Sheet Department of Visual Arts

    E-Print Network [OSTI]

    Olsen Jr., Dan R.

    to this major. Admission to the Department of Visual Arts does not guarantee admission to Brigham Young

  10. BFA in ILLUSTRATION (488035) Map Sheet Department of Visual Arts

    E-Print Network [OSTI]

    Olsen Jr., Dan R.

    to this major. Admission to the Department of Visual Arts does not guarantee admission to Brigham Young

  11. (Data in kilograms of germanium content, unless noted) Domestic Production and Use: The value of domestic refinery production of germanium, based on the 1995

    E-Print Network [OSTI]

    : The value of domestic refinery production of germanium, based on the 1995 producer price, was approximately industry consisted of three germanium refineries, one each in New York, Oklahoma, and Pennsylvania. World Refinery Production, Reserves, and Reserve Base: Refinery production Reserves6 Reserve base6 1994

  12. Hydrotreating Pyrolytic Lignin to Produce a Refinery Feedstock (Poster)

    SciTech Connect (OSTI)

    French, R. J.

    2013-09-01T23:59:59.000Z

    Fast pyrolysis of biomass followed by water separation to produce pyrolytic lignin and hydrotreating of the lignin could be used to produce a stable volatile low-oxygen intermediate liquid. Such a liquid could be converted into a finished motor-fuel in a refinery, taking advantage of the existing infrastructure and economies of scale of refineries. Hydrotreating just the lignin would consume less hydrogen while preserving about half of the energy of the original oil. The aqueous by-products could be reformed to produce the needed hydrogen and would contain much of the unwanted acids and unstable oxygenates. To assess such intermediate liquids, several pyrolytic lignins were prepared by mixing pyrolysis oil with water at 1:1 and 3:1 ratios. The carboxylic acidity in the pyrolytic lignin was reduced to 24 and 10 mg-KOH/g-lignin compared to 81 in the whole oil. These lignins were hydrotreated using Ni-Mo(S)/alumina, Pt/char, or Pd/C(activated) in a semi-batch 1 L stirred autoclave. The oil was stabilized under hydrogen at 150-280 degrees C, then water and light organics were removed by partial depressurization. Hydrodeoxygenation was then performed at 340-400 degrees C. Total pressure was controlled at 70 or 170 bar with hydrogen gas. Organic liquid yields of 39-56% were obtained. For many experiments the organic oxygen content was <7%, acidity was < 7 mg-KOH/g-oil, the volatility was greater than or equal to 94% and, on a carbon basis, the total yield of organic products miscible in hydrocarbons at a 1:10 ratio was over 50%. These properties are probably acceptable to a refinery.The residual liquids left in the reactor at the end of the experiment comprised 60-85% of the organic-phase product while the rest was condensate. 13C-NMR of the residual liquids showed that they were 50-80% aliphatic. 13C-NMR coupled with GC-MS identified phenolic compounds as the main oxygenates in most residual liquids.

  13. CO2 Reduction through Optimization of Steam Network in Petroleum Refineries: Evaluation of New Scenario

    E-Print Network [OSTI]

    Manesh, M. H. K; Khodaie, H.; Amidpour, M.

    2008-01-01T23:59:59.000Z

    Steam network of petroleum refinery is energy intensive, and consequently contribute significantly to the greenhouse gases emissions. A simple model for the estimation of CO2 emissions associated with operation of steam network as encountered...

  14. SELECTED TOPICS in APPLIED COMPUTER SCIENCE Data Mining and Data Gathering in a Refinery

    E-Print Network [OSTI]

    Mahmoud Reza Saybani A; Teh Ying Wah B

    This article handles one of critical steps of data mining, which is data collection. It will show how the researcher could get access to the valuable data of a refinery. And it explains the procedures of refining criteria for data collection. It also briefly explains the oil refining procedures to make the concept of data gathering at the refinery easier to understand. Each manufacturing company has its own specifications and rules that are needed to be considered when collecting data. As such the result of data gathering is almost always different for different manufacturing companies. Key-Words: Data gathering, data collection, data mining, oil refinery Data mining algorithms play an important and successful role in many manufacturing companies including oil refineries. Profit management, quality and process control in

  15. Refinery Furnaces Retrofit with Gas Turbines Achieve Both Energy Savings and Emission Reductions

    E-Print Network [OSTI]

    Giacobbe, F.; Iaquaniello, G.; Minet, R. G.; Pietrogrande, P.

    1985-01-01T23:59:59.000Z

    Integrating gas turbines with refinery furnaces can be a cost effective means of reducing NOx emissions while also generating electricity at an attractive heat rate. Design considerations and system costs are presented....

  16. CO2 Reduction through Optimization of Steam Network in Petroleum Refineries: Evaluation of New Scenario

    E-Print Network [OSTI]

    Manesh, M. H. K; Khodaie, H.; Amidpour, M.

    2008-01-01T23:59:59.000Z

    Steam network of petroleum refinery is energy intensive, and consequently contribute significantly to the greenhouse gases emissions. A simple model for the estimation of CO2 emissions associated with operation of steam network as encountered...

  17. Assuring Mechanical Integrity of Refinery Equipment Through Global ON-Stream Inspection

    SciTech Connect (OSTI)

    John W. Berthold

    2006-02-22T23:59:59.000Z

    The development of global on-stream inspection technology will have a dramatic effect on how refinery operations are managed in the U.S. in the future. Global on-stream inspection will provide assurance of the mechanical integrity of critical plant equipment and will allow refineries to operate more efficiently with less impact on our environment and with an increased margin of safety.

  18. Exergy Analysis of the Steam Network in Tehran Oil Refinery and Evaluation with New Scenario

    E-Print Network [OSTI]

    Khodaei, H.; Taheri, R.; Arghandeh, R.

    oil refinery, Exergy Analysis, Steam Network, Retrofit, Optimization 1. INTRODUCTION Refinery steam network is considered as a unit that consumes energy greatly. The main objective of the network is to produce the steam, which is required...) Using heat recovery steam generating systems and gas turbines instead of old boilers and so on. Figure 1 shows the opportunities of optimization in steam networks. in this paper, we complete the lost works such as optimization and estimation...

  19. Energy Efficient Refinery Process Developed with U.S. D.O.E. Support

    E-Print Network [OSTI]

    Mings, W. J.

    1983-01-01T23:59:59.000Z

    ENERGY EFFICIENT REFINERY PROCESS DEVELOPED WITH U.S. D.O.E. SUPPORT Walter J. Mings, P.E. EG&G Idaho, Inc. Idaho Falls, Idaho Abstract The United States Department of Energy histori cally has encouraged private efforts to develop en ergy... with potential for extensive industrial energy savings. INTRODUCTION An innovative energy saving refinery process (also called the catalytic distillation process) for pro ducing MTBE (Methyl Tertiary Butyl Ether) was devel oped by two Houston companies...

  20. Affordability analysis of lead emission controls for a smelter-refinery. Final report

    SciTech Connect (OSTI)

    Scherer, T.M.

    1989-10-01T23:59:59.000Z

    This document evaluates the affordability and economic impact of additional control measures deemed necessary for a smelter-refinery to meet the lead emission standard. The emphasis in the analysis is on the impact of control costs on the smelter-refinery's profitability. The analysis was performed using control-cost data from two different lead-smelter studies in conjunction with other existing industry data.

  1. Technologies for the separation and recovery of hydrogen from refinery streams

    SciTech Connect (OSTI)

    Wilcher, F.P.; Miller, G.Q.; Mitariten, M.J. [UOP, Des Plaines, IL (United States)

    1995-12-31T23:59:59.000Z

    The effective use and recovery of hydrogen from the major hydrogen-containing streams in the refinery is an important strategy to meet the refining demands of the 1990`s. Hydrogen upgrading in refinery applications can be achieved by pressure swing adsorption (PSA), selective permeation using polymer membranes, and cryogenic separation. Each of these processes has different characteristics which are of advantage in different situations. Process selection and specific application examples are discussed.

  2. Petroleum Refinery Jobs and Economic Development Impact (JEDI) Model User Reference Guide

    SciTech Connect (OSTI)

    Goldberg, M.

    2013-12-31T23:59:59.000Z

    The Jobs and Economic Development Impact (JEDI) models, developed through the National Renewable Energy Laboratory (NREL), are user-friendly tools utilized to estimate the economic impacts at the local level of constructing and operating fuel and power generation projects for a range of conventional and renewable energy technologies. The JEDI Petroleum Refinery Model User Reference Guide was developed to assist users in employing and understanding the model. This guide provides information on the model's underlying methodology, as well as the parameters and references used to develop the cost data utilized in the model. This guide also provides basic instruction on model add-in features, operation of the model, and a discussion of how the results should be interpreted. Based on project-specific inputs from the user, the model estimates job creation, earning and output (total economic activity) for a given petroleum refinery. This includes the direct, indirect and induced economic impacts to the local economy associated with the refinery's construction and operation phases. Project cost and job data used in the model are derived from the most current cost estimations available. Local direct and indirect economic impacts are estimated using economic multipliers derived from IMPLAN software. By determining the regional economic impacts and job creation for a proposed refinery, the JEDI Petroleum Refinery model can be used to field questions about the added value refineries may bring to the local community.

  3. International Journal of Chemistry; 2013[02] ISSN 2306-6415 Preservation Ways and Energy Consumption in Oil Refinery

    E-Print Network [OSTI]

    Amir Samimi

    Abstract: Preservation increase and energy return is one of the effective tools in saving. Studies show that energy consumption for each productive crude oil barred is dependence on the refinery complicated in reconfiguration of forge. Energy recovery increase in refinery over time that is due to economic factors like consumption fuel increase, it means that return increase is consistent with fuel price. It developed use of crude oil capability, distillation products in modern refinery. Modern refinery recovery dead to 10 to 15 % saving in energy consumption, Modern refinery.can developed energy return in several ways such as: Thermal exchange increase between processes streams, effective hydro exchange in process units, use of heaters with high thermal return and use of gas turbines with preheated air and produce steam of waste thermal. This paper investigates management ways and energy consumption recovery in different parts of oil refinery.

  4. Production of coal-based fuels and value-added products: coal to liquids using petroleum refinery streams

    SciTech Connect (OSTI)

    Clifford, C.E.B.; Schobert, H.H. [Pennsylvania State University, PA (United States)

    2008-07-01T23:59:59.000Z

    We are studying several processes that utilize coal, coal-derived materials, or biomass in existing refining facilities. A major emphasis is the production of a coal-based replacement for JP-8 jet fuel. This fuel is very similar to Jet A and jet A-1 in commercial variation, so this work has significant carry-over into the private sector. We have been focusing on three processes that would be retrofitted into a refinery: (1) coal tar/refinery stream blending and hydro-treatment; (2) coal extraction using refinery streams followed by hydro-treatment; and (3) co-coking of coal blended with refinery streams. 4 figs., 5 tabs.

  5. REFEREED PAPER PRE-TREATMENT OF REFINERY FINAL RUN-OFF FOR CHROMATOGRAPHIC SEPARATION

    E-Print Network [OSTI]

    Singh I; Stolz Hnp; Ndhlala T

    In the case of a back-end refinery, the final run-off or return syrup of 92-95 % purity and 75 brix is generally returned to the raw mill to be combined with raw syrup and boiled in the A-pans. Approximately 8 % of the input raw sugar brix into a refinery is returned, consequently locking up A-pan capacity and, in the case of a factory with marginal pan capacity, cane throughput is restricted. In addition, energy consumption is increased and sugar losses in final molasses are elevated. A number of processes have been considered to eliminate recycling refinery run-off, most of which require pre-treatment and/or high capital investment with a high degree of commercial risk. Test work was undertaken at the Tsb Malalane cane sugar refinery to determine the optimal pre-treatment option for decolorising and softening refinery return syrup. The pre-treatment results indicate that chemical softening, followed by the addition of a cationic colour precipitant and pH adjustment with sulphur dioxide, yields appreciable calcium reduction and modest decolourisation. The overall benefit indicates that the treated final run-off is of suitable quality to apply another crystallisation step and/or alternatively consider for further purification by chromatographic separation and/or resin decolourisation.

  6. FEASIBILITY STUDY FOR A PETROLEUM REFINERY FOR THE JICARILLA APACHE TRIBE

    SciTech Connect (OSTI)

    John D. Jones

    2004-10-01T23:59:59.000Z

    A feasibility study for a proposed petroleum refinery for the Jicarilla Apache Indian Reservation was performed. The available crude oil production was identified and characterized. There is 6,000 barrels per day of crude oil production available for processing in the proposed refinery. The proposed refinery will utilize a lower temperature, smaller crude fractionation unit. It will have a Naphtha Hydrodesulfurizer and Reformer to produce high octane gasoline. The surplus hydrogen from the reformer will be used in a specialized hydrocracker to convert the heavier crude oil fractions to ultra low sulfur gasoline and diesel fuel products. The proposed refinery will produce gasoline, jet fuel, diesel fuel, and a minimal amount of lube oil. The refinery will require about $86,700,000 to construct. It will have net annual pre-tax profit of about $17,000,000. The estimated return on investment is 20%. The feasibility is positive subject to confirmation of long term crude supply. The study also identified procedures for evaluating processing options as a means for American Indian Tribes and Native American Corporations to maximize the value of their crude oil production.

  7. TSNo s02-roberts104537-O Microscopic and Spectroscopic Speciation of Ni in Soils in the Vicinity of a Ni Refinery.

    E-Print Network [OSTI]

    Sparks, Donald L.

    in the Vicinity of a Ni Refinery. abstract Accurately predicting the fate and bioavailability of metals in smelter REFINERY ASA-CSSA-SSSA Annual Meetings - October 21 - 25, 2001 - Charlotte, NC #12;

  8. Potentials for fuel cells in refineries and chlor-alkali plants

    SciTech Connect (OSTI)

    Altseimer, J.H.; Roach, F.

    1986-01-01T23:59:59.000Z

    The market potentials for fuel cell cogeneration systems in petroleum refineries and chlor-alkali plants were evaluated. the most promising application appears to be in chlor-alkali plants where the production process is electricity intensive. Future anticipated changes in the production process are favorable to the use of fuel cells. The energy use in refineries is steam intensive with the required steam pressures ranging from approximately 15 to 650 psig. The near-term use of fuel cell cogeneration in refineries is not as attractive as in chlor-alkali plants. The phosphoric acid fuel cell is the most developed and the most competitive, but its use is limited by its being able to produce only low-pressure steam. Over the longer term, the molten carbonate and the solid oxide fuel cell both of which operate at significantly higher temperatures, are technically very attractive. However, they do not appear to be cost competitive with conventional systems.

  9. Methods applied to investigate the major VCE that occured in the TOTAL refinery's Fluid Catalytic Cracking Unit at La Mede,

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    95-35 Methods applied to investigate the major ?VCE that occured in the TOTAL refinery's Fluid.V.C.E, occured in the Gas Plant of the TOTAL refinery's Fluid Catalytic Cracking ünit at La Mede, France

  10. EVALUATION OF THE SACCHAROFLEX 2000 REFLECTANCE MEASURING INSTRUMENT FOR REFINED SUGAR COLOUR ESTIMATION AT HULETTS REFINERY

    E-Print Network [OSTI]

    M Moodley; N K Padayachee; V Govender

    Due to the successful use of the Saccharoflex 2000 reflectance measurement instrument on the estimation of refined sugar colour elsewhere in the world, it was decided by Tongaat-Hulett Sugar to evaluate the instrument at the refinery in Durban. Tests were carried out on first, second, third and fourth refined sugars, the results of which showed a good correlation between the ICUMSA colour measurement and the reflectance reading obtained from the Saccharoflex 2000. The instrument offers a number of advantages, the main one being that a refined sugar colour value can be obtained in less than a minute. The refinery has therefore purchased one for process control.

  11. (Data in kilograms of germanium content, unless otherwise noted) Domestic Production and Use: The value of domestic refinery production of germanium, based upon the 2000

    E-Print Network [OSTI]

    and Use: The value of domestic refinery production of germanium, based upon the 2000 producer price. The domestic industry consisted of three germanium refineries, one each in New York, Oklahoma, and Pennsylvania, and Issues: World refinery production of germanium remained steady in 2000. The recycling of scrap continued

  12. (Data in kilograms of germanium content, unless otherwise noted) Domestic Production and Use: The value of domestic refinery production of germanium, based upon an estimated

    E-Print Network [OSTI]

    and Use: The value of domestic refinery production of germanium, based upon an estimated 2003 producer. A germanium refinery in Utica, NY, produced germanium tetrachloride for optical fiber production. Another refinery in Oklahoma produced refined germanium compounds for the production of fiber optics, infrared

  13. (Data in kilograms of germanium content, unless otherwise noted) Domestic Production and Use: The value of domestic refinery production of germanium, based upon the 2002

    E-Print Network [OSTI]

    and Use: The value of domestic refinery production of germanium, based upon the 2002 producer price-bearing materials generated from the processing of zinc ores. The germanium refinery in Utica, NY, produced germanium tetrachloride for optical fiber production. The refinery in Oklahoma doubled its production

  14. (Data in kilograms of germanium content, unless otherwise noted) Domestic Production and Use: The value of domestic refinery production of germanium, based upon the 2001

    E-Print Network [OSTI]

    and Use: The value of domestic refinery production of germanium, based upon the 2001 producer price-bearing materials generated from the processing of zinc ores. The germanium refineries in New York and Oklahoma and set up in New York. The refinery in Oklahoma expanded, and a new secondary facility was built in North

  15. (Data in kilograms of germanium content unless otherwise noted) Domestic Production and Use: The value of domestic refinery production of germanium, based upon an estimated

    E-Print Network [OSTI]

    and Use: The value of domestic refinery production of germanium, based upon an estimated 2008 producer of 2008. A germanium refinery in Utica, NY, produced germanium tetrachloride for optical fiber production. Another refinery in Oklahoma produced refined germanium compounds for the production of fiber optics

  16. Problem 65 in Section 4.1 (Page 274) Constructing a pipeline Supertankers off-load oil at a docking facility 4 mi offshore. The nearest refinery

    E-Print Network [OSTI]

    Schilling, Anne

    facility 4 mi offshore. The nearest refinery is 9 mi east of the shore point nearest the docking facility. A pipeline must be constructed connecting the docking facility with the refinery. The pipeline costs $300.42 miles away from the refinery, or equivalently 3.58 miles away from Point A (as the back of the book has

  17. 2:00-2:30 Beverages, 2:30-4 PM Seminar Chevron operates two refineries on the west coast of California. Large parcels of

    E-Print Network [OSTI]

    4/18/2014 2:00-2:30 Beverages, 2:30-4 PM Seminar Abstract Chevron operates two refineries fuel must be moved between the refineries by ship to balance production. The El Segundo Marine Terminal these vapors are returned to the refinery for processing via a vapor return pipeline. El Segundo's terminal

  18. (Data in kilograms of germanium content, unless otherwise noted) Domestic Production and Use: The value of domestic refinery production of germanium, based on the 1999

    E-Print Network [OSTI]

    and Use: The value of domestic refinery production of germanium, based on the 1999 producer price. The domestic industry consisted of three germanium refineries, one each in New York, Oklahoma, and Pennsylvania@usgs.gov, fax: (703) 648-7757] #12;73 GERMANIUM Events, Trends, and Issues: World refinery production

  19. (Data in kilograms of germanium content, unless otherwise noted) Domestic Production and Use: The value of domestic refinery production of germanium, based on the 1996 producer

    E-Print Network [OSTI]

    and Use: The value of domestic refinery production of germanium, based on the 1996 producer price. The domestic industry consisted of three germanium refineries, one each in New York, Oklahoma, and Pennsylvania, and chemotherapy), 5%. Salient Statistics--United States: 1992 1993 1994 1995 1996e Production, refinery 13,000 10

  20. (Data in kilograms of germanium content unless otherwise noted) Domestic Production and Use: The value of domestic refinery production of germanium, based upon an estimated

    E-Print Network [OSTI]

    and Use: The value of domestic refinery production of germanium, based upon an estimated 2007 producer in the fourth quarter of 2007. A germanium refinery in Utica, NY, produced germanium tetrachloride for optical fiber production. Another refinery in Oklahoma produced refined germanium compounds for the production

  1. Energy Guideline Factors Provide a Better Measure of Refinery Energy Performance

    E-Print Network [OSTI]

    Libbers, D. D.

    1980-01-01T23:59:59.000Z

    Exxon Company, U.S.A. refineries reduced energy consumption by 25% between 1972 and 1978 compared with an 18% reduction for the U.S. Petroleum Refining Industry over the same period. The Exxon approach to conserving energy in petroleum refining...

  2. THE NEW GASIFICATION PROJECT AT ENI SANNAZZARO REFINERY AND ITS INTEGRATION WITH A

    E-Print Network [OSTI]

    Mwe Power Plant; Guido Collodi; Dario Camozzi; Snamprogetti Italy

    2004-01-01T23:59:59.000Z

    Following the new regulation introduced in Europe in the last years, defining more stringent limits for the emissions to the atmosphere, the necessity to find an alternative use for the fuel oil has created a new challenge for the refineries. At the same time the need to improve the Italian power production has pushed Eni, the Italian energy company, to enter the electricity market.

  3. Getting it right at Catlettsburg: How Ashland Petroleum`s flagship refinery transformed itself

    SciTech Connect (OSTI)

    Whitt, R.E.; Kennison, R.H.M.

    1997-03-01T23:59:59.000Z

    Life has its surprises. In the midst of the pain and excitement of a massive organizational overhaul, Ashland Petroleum`s Catlettsburg refinery--a 220,000-b/d facility in Ashland, Ky.,--experienced an unplanned cracker shutdown, a few production mishaps, a two-week employee walk-out, and belt-tightening necessitated by competitive pressures. Yet, despite these adverse circumstances, the Catlettsburg Refinery Initiative (CRI), a 20-month effort that shifted from planning to implementation in October 1995, yielded remarkable results. By 1996, the refinery began achieving record levels of through-put with lower maintenance costs, increasing company profitability by about 15% in the first half of 1996, over the same period in 1995. In a post-initiative survey, refinery employees expressed enthusiam for the changes and their new work-roles. A number of factors converged to give the initiative drive and direction: a pervasive discomfort with the status quo, a determination by top management to make fundamental changes, a commitment to rapid implementation and effective use of an outside consultant. But above all, success at Catlettsburg was a result of a grassroots approach to the process of change.

  4. Application and Operation of a 2-MW Organic Rankine Cycle System on a Refinery FCC Unit

    E-Print Network [OSTI]

    Drake, R. L.

    The nation's largest organic Rankine cycle (ORC) waste heat recovery system was started up in July 1984 at a West Coast oil refinery. The system includes two hermetically sealed turbine-generator units, each rated at 1070 kW. Each turbine...

  5. Restoration of Refinery Heaters Using the Technique of Prefabricated Ceramic Fiber Lined Panels

    E-Print Network [OSTI]

    Sento, H. D.

    1981-01-01T23:59:59.000Z

    Refinery heater fuel requirements often represent 50% of a units operating cost. A one percent change in the efficiency of a heater firing 100 MBtu/hr amounts to more than $25,000 per year. Heater efficiency is influenced by casing hot spots, air...

  6. Test plan, the Czechowice Oil Refinery bioremediation demonstration of a process waste lagoon. Revision 1

    SciTech Connect (OSTI)

    Altman, D.J.; Hazen, T.C.; Tien, A.J. [Westinghouse Savannah River Co., Aiken, SC (United States). Savannah River Technology Center; Worsztynowicz, A.; Ulfig, K. [Inst. for Ecology of Industrial Areas, Katowice (Poland)

    1997-05-10T23:59:59.000Z

    The overall objective of the bioremediation project is to provide a cost effective bioremediation demonstration of petroleum contaminated soil at the Czechowice Oil Refinery. Additional objectives include training of personnel, and transfer of this technology by example to Poland, and the Risk Abatement Center for Central and Eastern Europe (RACE). The goal of the remediation is to reduce the risk of PAH compounds in soil and provide a green zone (grassy area) adjacent to the site boundary. Initial project discussions with the Czechowice Oil Refinery resulted in helping the refinery find an immediate cost effective solution for the dense organic sludge in the lagoons. They found that when mixed with other waste materials, the sludge could be sold as a fuel source to local cement kilns. Thus the waste was incinerated and provided a revenue stream for the refinery to cleanup the lagoon. This allowed the bioremediation project to focus on remediation of contaminated soil that unusable as fuel, less recalcitrant and easier to handle and remediate. The assessment identified 19 compounds at the refinery that represented significant risk and would require remediation. These compounds consisted of metals, PAH`s, and BTEX. The contaminated soil to be remediated in the bioremediation demonstration contains only PAH (BTEX and metals are not significantly above background concentrations). The final biopile design consists of (1) dewatering and clearing lagoon A to clean clay, (2) adding a 20 cm layer of dolomite with pipes for drainage, leachate collection, air injection, and pH adjustment, (3) adding a 1.1 m layer of contaminated soil mixed with wood chips to improve permeability, and (4) completing the surface with 20 cm of top soil planted with grass.

  7. Effectiveness of in site biodegradation for the remediation of polycyclic aromatic hydrocarbons at a contaminated oil refinery, Port Arthur, Texas

    E-Print Network [OSTI]

    Moffit, Alfred Edward

    2000-01-01T23:59:59.000Z

    The effectiveness of bioremediation for the removal of polycyclic aromatic hydrocarbons (PAHs) from sediments contaminated with highly weathered petroleum was evaluated at a contaminated oil refinery. The sediments were chronically contaminated...

  8. Refinery Waste Heat Ammonia Absorption Refrigeration Plant (WHAARP) Recovers LPG's and Gasoline, Saves Energy, and Reduces Air Pollution

    E-Print Network [OSTI]

    Brant, B.; Brueske, S.; Erickson, D.; Papar, R.

    A first-of-its-kind Waste Heat Ammonia Absorption Refrigeration Plant (WHAARP) was installed by Planetec Utility Services Co., Inc. in partnership with Energy Concepts Co. at Ultramar Diamond Shamrock's 30,000 barrel per day refinery in Denver...

  9. Refinery fuel oxygenates in view of the complex model for reformulated gasline

    SciTech Connect (OSTI)

    Crawford, C.D.; Haelsig, C.P. [Fluor Daniel, Irvine, CA (United States)

    1994-12-31T23:59:59.000Z

    The final version of the Complex Model for reformulated gasoline (RFG) has now been issued with some surprising features that will significantly affect refinery fuel oxygenates planning. These include the following: (1) The only oxygenates included in the model are MTBE, ETBE, TAME, and Ethanol. (2) The Complex Model calculates that MTBE and TAME are significantly more effective for reduction of air toxics emissions than Ethanol and ETBE. (3) The Complex Model calculates that MTBE and TAME typically produce about equal reduction in air toxics emissions at the same RFG oxygen content. Although gasoline certification by the Complex Model is optional prior to 1998, after 1998 it will be mandatory for both reformulated and conventional gasolines. This paper considers refinery oxygenates production in view of these features of the Complex Model for RFG, basing the discussion on 2.0 weight percent oxygen content for RFG.

  10. Review of petroleum transport network models and their applicability to a national refinery model

    SciTech Connect (OSTI)

    Hooker, J. N.

    1982-04-01T23:59:59.000Z

    This report examines four petroleum transport network models to determine whether parts of them can be incorporated into the transportation component of a national refinery model. Two questions in particular are addressed. (a) How do the models under examination represent the oil transport network, estimate link capacities, and calculate transport costs. (b) Are any of these network representations, capacity estimates, or cost functions suitable for inclusion in a linear programming model of oil refinery and primary distribution in the US. Only pipeline and waterway transport is discussed. The models examined are the Department of Energy's OILNET model, the Department of Transportation's Freight Energy Model, the Federal Energy Administration Petroleum Transportation Network Model, and an Oak Ridge National Laboratory oil pipeline energy model. Link capacity and cost functions are recommended for each transport mode. The coefficients of the recommended pipeline cost functions remain to be estimated.

  11. Refinery Integration of By-Products from Coal-Derived Jet Fuels

    SciTech Connect (OSTI)

    Leslie R. Rudnick; Andre Boehman; Chunshan Song; Bruce Miller; John Andresen

    2004-09-17T23:59:59.000Z

    This report summarizes the accomplishments toward project goals during the first twelve months of the project to assess the properties and performance of coal based products. These products are in the gasoline, diesel and fuel oil range and result from coal based jet fuel production from an Air Force funded program. Specific areas of progress include generation of coal based material that has been fractionated into the desired refinery cuts, acquisition and installation of a research gasoline engine, and modification of diesel engines for use in evaluating diesel produced in the project. The desulfurization of sulfur containing components of coal and petroleum is being studied so that effective conversion of blended coal and petroleum streams can be efficiently converted to useful refinery products. Equipment is now in place to begin fuel oil evaluations to assess the quality of coal based fuel oil. Coal samples have procured and are being assessed for cleaning prior to use in coking studies.

  12. REFINERY INTEGRATION OF BY-PRODUCTS FROM COAL-DERIVED JET FUELS

    SciTech Connect (OSTI)

    Leslie R. Rudnick; Andre Boehman; Chunshan Song; Bruce Miller; Gareth Mitchell

    2005-05-18T23:59:59.000Z

    This report summarizes the accomplishments toward project goals during the first six months of the second year of the project to assess the properties and performance of coal based products. These products are in the gasoline, diesel and fuel oil range and result from coal based jet fuel production from an Air Force funded program. Specific areas of progress include generation of coal based material that has been fractionated into the desired refinery cuts, acquisition and installation of a research gasoline engine, and modification of diesel engines for use in evaluating diesel produced in the project. The desulfurization of sulfur containing components of coal and petroleum is being studied so that effective conversion of blended coal and petroleum streams can be efficiently converted to useful refinery products. Equipment is now in place to begin fuel oil evaluations to assess the quality of coal based fuel oil. Coal samples have procured and are being assessed for cleaning prior to use in coking studies.

  13. REFINERY INTEGRATION OF BY-PRODUCTS FROM COAL-DERIVED JET FUELS

    SciTech Connect (OSTI)

    Leslie R. Rudnick; Andre Boehman; Chunshan Song; Bruce Miller; John Andresen

    2004-04-23T23:59:59.000Z

    This report summarizes the accomplishments toward project goals during the first six months of the project to assess the properties and performance of coal based products. These products are in the gasoline, diesel and fuel oil range and result from coal based jet fuel production from an Air Force funded program. Specific areas of progress include generation of coal based material that has been fractionated into the desired refinery cuts, acquisition and installation of a research gasoline engine, and modification of diesel engines for use in evaluating diesel produced in the project. The desulfurization of sulfur containing components of coal and petroleum is being studied so that effective conversion of blended coal and petroleum streams can be efficiently converted to useful refinery products. Equipment is now in place to begin fuel oil evaluations to assess the quality of coal based fuel oil. Coal samples have procured and are being assessed for cleaning prior to use in coking studies.

  14. Refinery Integration of By-Products from Coal-Derived Jet Fuels

    SciTech Connect (OSTI)

    Leslie R. Rudnick; Andre Boehman; Chunshan Song; Bruce Miller; Gareth Mitchell

    2005-11-17T23:59:59.000Z

    This report summarizes the accomplishments toward project goals during the first six months of the second year of the project to assess the properties and performance of coal based products. These products are in the gasoline, diesel and fuel oil range and result from coal based jet fuel production from an Air Force funded program. Specific areas of progress include generation of coal based material that has been fractionated into the desired refinery cuts, acquisition and installation of a research gasoline engine, and modification of diesel engines for use in evaluating diesel produced in the project. The desulfurization of sulfur containing components of coal and petroleum is being studied so that effective conversion of blended coal and petroleum streams can be efficiently converted to useful refinery products. Evaluations to assess the quality of coal based fuel oil are reported. Coal samples have procured and are being assessed for cleaning prior to use in coking studies.

  15. Refinery Integration of By-Products from Coal-Derived Jet Fuels

    SciTech Connect (OSTI)

    Caroline E. Burgess Clifford; Andre Boehman; Chunshan Song; Bruce Miller; Gareth Mitchell

    2006-05-17T23:59:59.000Z

    This report summarizes the accomplishments toward project goals during the first six months of the third year of the project to assess the properties and performance of coal based products. These products are in the gasoline, diesel and fuel oil range and result from coal based jet fuel production from an Air Force funded program. Specific areas of progress include generation of coal based material that has been fractionated into the desired refinery cuts, acquisition and installation of a research gasoline engine, and modification of diesel engines for use in evaluating diesel produced in the project. Characterization of the gasoline fuel indicates a dominance of single ring alkylcycloalkanes that have a low octane rating; however, blends containing these compounds do not have a negative effect upon gasoline when blended in refinery gasoline streams. Characterization of the diesel fuel indicates a dominance of 3-ring aromatics that have a low cetane value; however, these compounds do not have a negative effect upon diesel when blended in refinery diesel streams. The desulfurization of sulfur containing components of coal and petroleum is being studied so that effective conversion of blended coal and petroleum streams can be efficiently converted to useful refinery products. Equipment is now in place to begin fuel oil evaluations to assess the quality of coal based fuel oil. Combustion and characterization of fuel oil indicates that the fuel is somewhere in between a No. 4 and a No. 6 fuel oil. Emission testing indicates the fuel burns similarly to these two fuels, but trace metals for the coal-based material are different than petroleum-based fuel oils. Co-coking studies using cleaned coal are highly reproducible in the pilot-scale delayed coker. Evaluation of the coke by Alcoa, Inc. indicated that while the coke produced is of very good quality, the metals content of the carbon is still high in iron and silica. Coke is being evaluated for other possible uses. Methods to reduce metal content are being evaluated.

  16. ,"U.S. Total Shell Storage Capacity at Operable Refineries"

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National and Regional Data; Row: NAICS Codes; Column: Energy SourcesRefinery, Bulk Terminal, and Natural Gas Plant StocksPetroleum

  17. Production of ethanol from refinery waste gases. Phase 2, technology development, annual report

    SciTech Connect (OSTI)

    Arora, D.; Basu, R.; Phillips, J.R.; Wikstrom, C.V.; Clausen, E.C.; Gaddy, J.L.

    1995-07-01T23:59:59.000Z

    Oil refineries discharge large volumes of H{sub 2}, CO, and CO{sub 2} from cracking, coking, and hydrotreating operations. This program seeks to develop a biological process for converting these waste gases into ethanol, which can be blended with gasoline to reduce emissions. Production of ethanol from all 194 US refineries would save 450 billion BTU annually, would reduce crude oil imports by 110 million barrels/year and emissions by 19 million tons/year. Phase II efforts has yielded at least 3 cultures (Clostridium ljungdahlii, Isolate O-52, Isolate C-01) which are able to produce commercially viable concentrations of ethanol from CO, CO{sub 2}, and H{sub 2} in petroleum waste gas. Single continuous stirred tank reactor studies have shown that 15-20 g/L of ethanol can be produced, with less than 5 g/L acetic acid byproduct. Culture and reactor optimization in Phase III should yield even higher ethanol concentrations and minimal acetic acid. Product recovery studies showed that ethanol is best recovered in a multi-step process involving solvent extraction/distillation to azeotrope/azeotropic distillation or pervaporation, or direct distillation to the azeotrope/azeotropic distillation or pervaporation. Projections show that the ethanol facility for a typical refinery would require an investment of about $30 million, which would be returned in less than 2 years.

  18. (Data in kilograms of germanium content, unless otherwise noted) Domestic Production and Use: The value of domestic refinery production of germanium, based on the 1998 producer

    E-Print Network [OSTI]

    and Use: The value of domestic refinery production of germanium, based on the 1998 producer price. The domestic industry consisted of three germanium refineries, one each in New York, Oklahoma, and Pennsylvania Production, refinery 10,000 10,000 18,000 20,000 22,000e Total imports 14,700 16,200 27,500 23,700 20

  19. (Data in kilograms of germanium content, unless otherwise noted) Domestic Production and Use: The value of domestic refinery production of germanium, based on the 1997 producer

    E-Print Network [OSTI]

    and Use: The value of domestic refinery production of germanium, based on the 1997 producer price. The domestic industry consisted of three germanium refineries, one each in New York, Oklahoma, and Pennsylvania, refinery 10,000 10,000 10,000 18,000 20,000e Total imports 15,000 15,000 16,000 27,000 17,0001 Exports NA

  20. Test plan: the Czechowice Oil Refinery bioremediation demonstration of a process waste lagoon

    SciTech Connect (OSTI)

    Altman, D.J.; Lombard, K.H.; Hazen, T.C.

    1997-03-31T23:59:59.000Z

    The remediation strategies that will be applied at the Czechowice Oil Refinery waste lagoon in Czechowice, Poland are designed, managed, and implemented under the direction of the Westinghouse Savannah River Company (WSRC) for the United States Department of Energy (DOE). WSRC will be assisted in the demonstration by The Institute for Ecology of Industrial Areas (IETU). This collaboration between IETU and DOE will provide the basis for international technology transfer of new and innovative remediation technologies that can be applied in Poland and the Eastern European Region as well.

  1. Morbidity And Sulfur Dioxide: Evidence From French Strikes At Oil Refineries

    E-Print Network [OSTI]

    Matthew Neidell; Emmanuelle Lavaine

    2012-01-01T23:59:59.000Z

    This paper examines the impact of sulfur dioxide (SO2) in France on health outcomes at a census track level. To do so, we use recent strikes affecting oil refineries in France, in October 2010, as a natural experiment. Our work offers several contributions. We first show that a temporal shut down in the refining process leads to a reduction in sulfur dioxide concentration. We then use this narrow time frame exogenous shock to assess the impact of a change in air pollution concentration on respiratory outcomes. Our estimates suggest that daily variation in SO2 air pollution has economically significant health effects at levels below the current standard. 0

  2. Standard practice for evaluating and qualifying oil field and refinery corrosion inhibitors using rotating cage

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2006-01-01T23:59:59.000Z

    1.1 This practice covers a generally accepted procedure to use the rotating cage (RC) for evaluating corrosion inhibitors for oil field and refinery applications. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  3. ,"U.S. Working Storage Capacity at Operable Refineries"

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National and Regional Data; Row: NAICS Codes; Column: Energy SourcesRefinery, Bulk Terminal, and Natural GasU.S. Underground NaturalWorking

  4. Multiscale Modeling of Materials - Concepts and Illustration

    E-Print Network [OSTI]

    Aditi Mallik; Keith Runge; James W. Dufty; Hai-Ping Cheng

    2005-07-24T23:59:59.000Z

    The approximate representation of a quantum solid as an equivalent composite semi-classical solid is considered for insulating materials. The composite is comprised of point ions moving on a potential energy surface. In the classical bulk domain this potential energy is represented by pair potentials constructed to give the same structure and elastic properties as the underlying quantum solid. In a small local quantum domain the potential is determined from a detailed quantum calculation of the electronic structure. The primary new ingredients are 1) a determination of the pair potential from quantum data for equilibrium and strained structures, 2) development of pseudo-atoms for a realistic treatment of charge densities where bonds have been broken to define the quantum domain, and 3) inclusion of polarization effects on the quantum domain due to its environment. This formal structure is illustrated in detail for an silica nanorod. For each configuration considered, the charge density of the entire solid is calculated quantum mechanically to provide the reference by which to judge the accuracy of the modeling.It is then shown that the quantum rod, the rod constructed from the classical pair potentials, and the composite classical/quantum rod all have the same equilibrium structure and response to elastic strain. The accuracy of the modeling is shown to apply for two quite different quantum chemical methods for the underlying quantum mechanics: transfer Hamiltonian and density functional methods.

  5. Achieving very low mercury levels in refinery wastewater by membrane filtration.

    SciTech Connect (OSTI)

    Urgun Demirtas, M.; Benda, P.; Gillenwater, P. S.; Negri, M. C.; Xiong, H.; Snyder, S. W. (Center for Nanoscale Materials); ( ES)

    2012-05-15T23:59:59.000Z

    Microfiltration (MF), ultrafiltration (UF), nanofiltration (NF) and reverse osmosis (RO) membranes were evaluated for their ability to achieve the world's most stringent Hg discharge criterion (<1.3 ng/L) in an oil refinery's wastewater. The membrane processes were operated at three different pressures to demonstrate the potential for each membrane technology to achieve the targeted effluent mercury concentrations. The presence of mercury in the particulate form in the refinery wastewater makes the use of MF and UF membrane technologies more attractive in achieving very low mercury levels in the treated wastewater. Both NF and RO were also able to meet the target mercury concentration at lower operating pressures (20.7 bar). However, higher operating pressures ({ge}34.5 bar) had a significant effect on NF and RO flux and fouling rates, as well as on permeate quality. SEM images of the membranes showed that pore blockage and narrowing were the dominant fouling mechanisms for the MF membrane while surface coverage was the dominant fouling mechanism for the other membranes. The correlation between mercury concentration and particle size distribution was also investigated to understand mercury removal mechanisms by membrane filtration. The mean particle diameter decreased with filtration from 1.1 {+-} 0.0 {micro}m to 0.74 {+-} 0.2 {micro}m after UF.

  6. Refinery Integration

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of ContaminationHubs+18,new2004_v1.3_5.0.zipFlorida4 U.S. Manufacturing Energy UseMary

  7. Wilolud Online Journals, 2008. THE NIGERIAN FUEL ENERGY SUPPLY CRISIS AND THE PROPOSED PRIVATE REFINERIES PROSPECTS AND PROBLEMS

    E-Print Network [OSTI]

    Agwom Sani Z

    Dynamism of the world economy has compelled Nigerians to accept the liberalization of its economy to encourage private sector participation and induce managerial efficiency. This has become very imperative most especially, in the downstream sub-sector of the Nigerian oil and gas industry by the establishment and management of private refineries in view of the persistent fuel energy crisis. An attempt is made here at analyzing the prospects and problems of such refineries that are expected to end the fuel energy crisis which started in the 1970s due to increased demand for petroleum products for rehabilitation and reconstruction after the civil war but later metamorphosed into a hydraheaded monster in the 1980s to date. Efforts towards arresting this crisis by the government through the establishment of more refineries, storage depots and network of distribution pipelines etc achieved a short-term solution due to the abysmal low performance of the refineries and facilities in contrast to increasing demand for petroleum products. It is deduced that the low performance resulted from bad and corrupt management by indigenous technocrats and political leaders as well as vandalization of facilities. Prospects for such investments were identified, as well as some of the problems to content with. This is in order to understand the pros and cons of such investments in view of their capital intensiveness and the need to achieve economic goals that must incorporate environmental and social objectives.

  8. Location Map

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Lane, Michael

    Map file package containing shaded relief base with Hot Pot project area, major roads, railroads, and rivers. The inset map shows regional Paleozoic structural elements.

  9. Location Map

    SciTech Connect (OSTI)

    Lane, Michael

    2013-06-27T23:59:59.000Z

    Map file package containing shaded relief base with Hot Pot project area, major roads, railroads, and rivers. The inset map shows regional Paleozoic structural elements.

  10. Refinery Integration of By-Products from Coal-Derived Jet Fuels

    SciTech Connect (OSTI)

    Caroline E. Burgess Clifford; Andre' Boehman; Chunshan Song; Bruce Miller; Gareth Mitchell

    2006-09-17T23:59:59.000Z

    This report summarizes the accomplishments toward project goals during the second six months of the third year of the project to assess the properties and performance of coal based products. These products are in the gasoline, diesel and fuel oil range and result from coal based jet fuel production from an Air Force funded program. Specific areas of progress include generation of coal based material that has been fractionated into the desired refinery cuts and examination of carbon material, the use of a research gasoline engine to test coal-based gasoline, and modification of diesel engines for use in evaluating diesel produced in the project. At the pilot scale, the hydrotreating process was modified to separate the heavy components from the LCO and RCO fractions before hydrotreating in order to improve the performance of the catalysts in further processing. Characterization of the gasoline fuel indicates a dominance of single ring alkylcycloalkanes that have a low octane rating; however, blends containing these compounds do not have a negative effect upon gasoline when blended in refinery gasoline streams. Characterization of the diesel fuel indicates a dominance of 3-ring aromatics that have a low cetane value; however, these compounds do not have a negative effect upon diesel when blended in refinery diesel streams. Both gasoline and diesel continue to be tested for combustion performance. The desulfurization of sulfur containing components of coal and petroleum is being studied so that effective conversion of blended coal and petroleum streams can be efficiently converted to useful refinery products. Activated carbons have proven useful to remove the heavy sulfur components, and unsupported Ni/Mo and Ni/Co catalysts have been very effective for hydrodesulfurization. Equipment is now in place to begin fuel oil evaluations to assess the quality of coal based fuel oil. Combustion and characterization of the latest fuel oil (the high temperature fraction of RCO from the latest modification) indicates that the fraction is heavier than a No. 6 fuel oil. Combustion efficiency on our research boiler is {approx}63% for the heavy RCO fraction, lower than the combustion performance for previous co-coking fuel oils and No. 6 fuel oil. An additional coal has been procured and is being processed for the next series of delayed co-coking runs. Work continues on characterization of liquids and solids from co-coking of hydrotreated decant oils; liquid yields include more saturated and hydro- aromatics, while the coke quality varies depending on the conditions used. Pitch material is being generated from the heavy fraction of co-coking. Investigation of coal extraction as a method to produce RCO continues; the reactor modifications to filter the products hot and to do multi-stage extraction improve extraction yields from {approx}50 % to {approx}70%. Carbon characterization of co-cokes for use as various carbon artifacts continues.

  11. Refinery Integration of By-Products from Coal-Derived Jet Fuels

    SciTech Connect (OSTI)

    Caroline E. Burgess Clifford; Andre Boehman; Chunshan Song; Bruce Miller; Gareth Mitchell

    2007-03-17T23:59:59.000Z

    This report summarizes the accomplishments toward project goals during the no cost extension period of the third year of the project to assess the properties and performance of coal based products. These products are in the gasoline, diesel and fuel oil range and result from coal based jet fuel production from an Air Force funded program. Specific areas of progress include generation of coal based material that has been fractionated into the desired refinery cuts for a third round of testing, the use of a research gasoline engine to test coal-based gasoline, and modification of diesel engines for use in evaluating diesel produced in the project. At the pilot scale, the hydrotreating process was modified to separate the heavy components from the LCO and RCO fractions before hydrotreating in order to improve the performance of the catalysts in further processing. Hydrotreating and hydrogenation of the product has been completed, and due to removal of material before processing, yield of the jet fuel fraction has decreased relative to an increase in the gasoline fraction. Characterization of the gasoline fuel indicates a dominance of single ring alkylcycloalkanes that have a low octane rating; however, blends containing these compounds do not have a negative effect upon gasoline when blended in refinery gasoline streams. Characterization of the diesel fuel indicates a dominance of 3-ring aromatics that have a low cetane value; however, these compounds do not have a negative effect upon diesel when blended in refinery diesel streams. Both gasoline and diesel continue to be tested for combustion performance. The desulfurization of sulfur containing components of coal and petroleum is being studied so that effective conversion of blended coal and petroleum streams can be efficiently converted to useful refinery products. Activated carbons have proven useful to remove the heavy sulfur components, and unsupported Ni/Mo and Ni/Co catalysts have been very effective for hydrodesulfurization. Equipment is now in place to begin fuel oil evaluations to assess the quality of coal based fuel oil. Combustion and characterization of the latest fuel oil (the high temperature fraction of RCO from the latest modification) indicates that the fraction is heavier than a No. 6 fuel oil. Combustion efficiency on our research boiler is {approx}63% for the heavy RCO fraction, lower than the combustion performance for previous co-coking fuel oils and No. 6 fuel oil. Emission testing indicates that the coal derived material has more trace metals related to coal than petroleum, as seen in previous runs. An additional coal has been procured and is being processed for the next series of delayed co-coking runs. The co-coking of the runs with the new coal have begun, with the coke yield similar to previous runs, but the gas yield is lower and the liquid yield is higher. Characterization of the products continues. Work continues on characterization of liquids and solids from co-coking of hydrotreated decant oils; liquid yields include more saturated and hydro- aromatics, while the coke quality varies depending on the conditions used. Pitch material is being generated from the heavy fraction of co-coking.

  12. Standard guide for evaluating and qualifying oilfield and refinery corrosion inhibitors in the laboratory

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2006-01-01T23:59:59.000Z

    1.1 This guide covers some generally accepted laboratory methodologies that are used for evaluating corrosion inhibitors for oilfield and refinery applications in well defined flow conditions. 1.2 This guide does not cover detailed calculations and methods, but rather covers a range of approaches which have found application in inhibitor evaluation. 1.3 Only those methodologies that have found wide acceptance in inhibitor evaluation are considered in this guide. 1.4 This guide is intended to assist in the selection of methodologies that can be used for evaluating corrosion inhibitors. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

  13. Reformulated Gasoline Foreign Refinery Rules (Released in the STEO January 1998)

    Reports and Publications (EIA)

    1998-01-01T23:59:59.000Z

    On August 27, 1997, the Environmental Protection Agency (EPA) promulgated revised the rules that allow foreign refiners to establish and use individual baselines, but it would not be mandatory (the optional use of an individual refinery baseline is not available to domestic refiners.) If a foreign refiner did not establish and use an individual baseline, the gasoline they export to the United States would be regulated through the importer, and subject to the importer's baseline (most likely the statutory baseline). Specific regulatory provisions are implemented to ensure that the option to use an individual baseline would not lead to adverse environmental impacts. This involves monitoring the average quality of imported gasoline, and if a specified benchmark is exceeded, remedial action would be taken by adjusting the requirements applicable to imported gasoline.

  14. Refinery Integration of By-Products from Coal-Derived Jet Fuels

    SciTech Connect (OSTI)

    Caroline Clifford; Andre Boehman; Chunshan Song; Bruce Miller; Gareth Mitchell

    2008-03-31T23:59:59.000Z

    The final report summarizes the accomplishments toward project goals during length of the project. The goal of this project was to integrate coal into a refinery in order to produce coal-based jet fuel, with the major goal to examine the products other than jet fuel. These products are in the gasoline, diesel and fuel oil range and result from coal-based jet fuel production from an Air Force funded program. The main goal of Task 1 was the production of coal-based jet fuel and other products that would need to be utilized in other fuels or for non-fuel sources, using known refining technology. The gasoline, diesel fuel, and fuel oil were tested in other aspects of the project. Light cycle oil (LCO) and refined chemical oil (RCO) were blended, hydrotreated to removed sulfur, and hydrogenated, then fractionated in the original production of jet fuel. Two main approaches, taken during the project period, varied where the fractionation took place, in order to preserve the life of catalysts used, which includes (1) fractionation of the hydrotreated blend to remove sulfur and nitrogen, followed by a hydrogenation step of the lighter fraction, and (2) fractionation of the LCO and RCO before any hydrotreatment. Task 2 involved assessment of the impact of refinery integration of JP-900 production on gasoline and diesel fuel. Fuel properties, ignition characteristics and engine combustion of model fuels and fuel samples from pilot-scale production runs were characterized. The model fuels used to represent the coal-based fuel streams were blended into full-boiling range fuels to simulate the mixing of fuel streams within the refinery to create potential 'finished' fuels. The representative compounds of the coal-based gasoline were cyclohexane and methyl cyclohexane, and for the coal-base diesel fuel they were fluorine and phenanthrene. Both the octane number (ON) of the coal-based gasoline and the cetane number (CN) of the coal-based diesel were low, relative to commercial fuels ({approx}60 ON for coal-based gasoline and {approx}20 CN for coal-based diesel fuel). Therefore, the allowable range of blending levels was studied where the blend would achieve acceptable performance. However, in both cases of the coal-based fuels, their ignition characteristics may make them ideal fuels for advanced combustion strategies where lower ON and CN are desirable. Task 3 was designed to develop new approaches for producing ultra clean fuels and value-added chemicals from refinery streams involving coal as a part of the feedstock. It consisted of the following three parts: (1) desulfurization and denitrogenation which involves both new adsorption approach for selective removal of nitrogen and sulfur and new catalysts for more effective hydrotreating and the combination of adsorption denitrogenation with hydrodesulfurization; (2) saturation of two-ring aromatics that included new design of sulfur resistant noble-metal catalysts for hydrogenation of naphthalene and tetralin in middle distillate fuels, and (3) value-added chemicals from naphthalene and biphenyl, which aimed at developing value-added organic chemicals from refinery streams such as 2,6-dimethylnaphthalene and 4,4{prime}-dimethylbiphenyl as precursors to advanced polymer materials. Major advances were achieved in this project in designing the catalysts and sorbent materials, and in developing fundamental understanding. The objective of Task 4 was to evaluate the effect of introducing coal into an existing petroleum refinery on the fuel oil product, specifically trace element emissions. Activities performed to accomplish this objective included analyzing two petroleum-based commercial heavy fuel oils (i.e., No. 6 fuel oils) as baseline fuels and three co-processed fuel oils, characterizing the atomization performance of a No. 6 fuel oil, measuring the combustion performance and emissions of the five fuels, specifically major, minor, and trace elements when fired in a watertube boiler designed for natural gas/fuel oil, and determining the boiler performance when firing the five fuels. Two

  15. Soot and SO[subscript 2] contribution to the supersites in the MILAGRO campaign from elevated flares in the Tula Refinery

    E-Print Network [OSTI]

    Molina, Luisa Tan

    This work presents a simulation of the plume trajectory emitted by flaring activities of the Miguel Hidalgo Refinery in Mexico. The flame of a representative sour gas flare is modeled with a CFD combustion code in order ...

  16. Greenhouse Gas Emission Reduction in the ENERGY STAR Commercial, Industrial and Residential Sectors. An Example of How the Refinery Industry is Capitalizing on ENERGY STAR

    E-Print Network [OSTI]

    Patrick, K.

    2008-01-01T23:59:59.000Z

    Greenhouse Gas Emission Reduction in the ENERGY STAR Commercial, Industrial and Residential Sectors. An Example of how the Refinery Industry is Capitalizing on ENERGY STAR Kelly Patrick U.S. Environmental Protection Agency kelly...

  17. Implementing an Energy Management System at TOTAL Prot Arthur Refinery: The process to improving and sustaining energy efficiency performance at a facility.

    E-Print Network [OSTI]

    Hoyle, A.

    2013-01-01T23:59:59.000Z

    PROPRIETARY INFORMATION? 2011 KBC Advanced Technologies plc. All Rights Reserved. Implementing an Energy Management System at TOTAL Port Arthur Refinery: The process to improving and sustaining energy efficiency performance at a facility May... Improvements ? Cost-savings initiatives ? Increasing environmental awareness ? Increasing throughput by debottlenecking processes ? Increasing government mandates 2May 2013 Energy Costs for a 200kBPD Complex refinery Typically, energy efficiency programs...

  18. Roadmap: Photo Illustration -Bachelor of Science [CI-BS-PHOI

    E-Print Network [OSTI]

    Sheridan, Scott

    Roadmap: Photo Illustration - Bachelor of Science [CI-BS-PHOI] College of Communication/LNHD This roadmap is a recommended semester-by-semester plan of study for this major. However, courses if not satisfied earlier. See note 3 on page 2. #12;Roadmap: Photo Illustration - Bachelor of Science [CI

  19. Carbon Capture and Sequestration from a Hydrogen Production Facility in an Oil Refinery

    SciTech Connect (OSTI)

    Engels, Cheryl; Williams, Bryan, Valluri, Kiranmal; Watwe, Ramchandra; Kumar, Ravi; Mehlman, Stewart

    2010-06-21T23:59:59.000Z

    The project proposed a commercial demonstration of advanced technologies that would capture and sequester CO2 emissions from an existing hydrogen production facility in an oil refinery into underground formations in combination with Enhanced Oil Recovery (EOR). The project is led by Praxair, Inc., with other project participants: BP Products North America Inc., Denbury Onshore, LLC (Denbury), and Gulf Coast Carbon Center (GCCC) at the Bureau of Economic Geology of The University of Texas at Austin. The project is located at the BP Refinery at Texas City, Texas. Praxair owns and operates a large hydrogen production facility within the refinery. As part of the project, Praxair would construct a CO2 capture and compression facility. The project aimed at demonstrating a novel vacuum pressure swing adsorption (VPSA) based technology to remove CO2 from the Steam Methane Reformers (SMR) process gas. The captured CO2 would be purified using refrigerated partial condensation separation (i.e., cold box). Denbury would purchase the CO2 from the project and inject the CO2 as part of its independent commercial EOR projects. The Gulf Coast Carbon Center at the Bureau of Economic Geology, a unit of University of Texas at Austin, would manage the research monitoring, verification and accounting (MVA) project for the sequestered CO2, in conjunction with Denbury. The sequestration and associated MVA activities would be carried out in the Hastings field at Brazoria County, TX. The project would exceed DOE?s target of capturing one million tons of CO2 per year (MTPY) by 2015. Phase 1 of the project (Project Definition) is being completed. The key objective of Phase 1 is to define the project in sufficient detail to enable an economic decision with regard to proceeding with Phase 2. This topical report summarizes the administrative, programmatic and technical accomplishments completed in Phase 1 of the project. It describes the work relative to project technical and design activities (associated with CO2 capture technologies and geologic sequestration MVA), and Environmental Information Volume. Specific accomplishments of this Phase include: 1. Finalization of the Project Management Plan 2. Development of engineering designs in sufficient detail for defining project performance and costs 3. Preparation of Environmental Information Volume 4. Completion of Hazard Identification Studies 5. Completion of control cost estimates and preparation of business plan During the Phase 1 detailed cost estimate, project costs increased substantially from the previous estimate. Furthermore, the detailed risk assessment identified integration risks associated with potentially impacting the steam methane reformer operation. While the Phase 1 work identified ways to mitigate these integration risks satisfactorily from an operational perspective, the associated costs and potential schedule impacts contributed to the decision not to proceed to Phase 2. We have concluded that the project costs and integration risks at Texas City are not commensurate with the potential benefits of the project at this time.

  20. Production of ethanol from refinery waste gases. Phase 3. Engineering development. Annual report, April 1, 1995--May 15, 1996

    SciTech Connect (OSTI)

    Arora, D.; Basu, R.; Phillips, J.R.; Wikstrom, C.V.; Clausen, E.C; Gaddy, J.L.

    1996-11-01T23:59:59.000Z

    Refineries discharge large volumes of H2, CO, and CO 2 from cracking, coking, and hydrotreating operations. This R&D program seeks to develop, demonstrate, and commercialize a biological process for converting these waste gases into ethanol for blending with gasoline. A 200,000 BPD refinery could produce up to 38 million gallons ethanol per year. The program is being conducted in 3 phases: II, technology development; III, engineering development; and IV, demonstration. Phase I, exploratory development, has been completed. The research effort has yielded two strains (Isolates O-52 and C-01) which are to be used in the pilot studies to produce ethanol from CO, CO2, and H2 in petroleum waste gas. Results from single continuous stirred tank reactor (CSTR) laboratory tests have shown that 20-25 g/L ethanol can be produced with < 5 g/L acetic acid byproduct. Laboratory studies with two CSTRs in series have yielded ethanol concentrations of 30-35 g/L with 2-4 g/L acetic acid byproduct. Water recycle from distillation back to the fermenter shows that filtration of the water before distillation eliminates the recycle of toxic materials back to the fermenter. Product recovery in the process will use direct distillation to the azeotrope, followed by adsorption to produce neat ethanol. This is less energy intensive than e.g. solvent extraction, azeotropic distillation, or pervaporation. Economic projections are quite attractive; the economics are refinery stream dependent and thus vary depending on refinery location and operation.

  1. ,"U.S. Refinery, Bulk Terminal, and Natural Gas Plant Stocks of Selected Petroleum Products"

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National and Regional Data; Row: NAICS Codes; Column: Energy SourcesRefinery, Bulk Terminal, and Natural Gas Plant Stocks of Selected Petroleum

  2. Fuel-Flexible Combustion System for Refinery and Chemical Plant Process Heaters

    SciTech Connect (OSTI)

    Benson, Charles; Wilson, Robert

    2014-04-30T23:59:59.000Z

    This project culminated in the demonstration of a full-scale industrial burner which allows a broad range of opportunity gaseous fuels to be cost-effectively and efficiently utilized while generating minimal emissions of criteria air pollutants. The burner is capable of maintaining a stable flame when the fuel composition changes rapidly. This enhanced stability will contribute significantly to improving the safety and reliability of burner operation in manufacturing sites. Process heating in the refining and chemicals sectors is the primary application for this burner. The refining and chemical sectors account for more than 40% of total industrial natural gas use. Prior to the completion of this project, an enabling technology did not exist that would allow these energy-intensive industries to take full advantage of opportunity fuels and thereby reduce their natural gas consumption. Opportunity gaseous fuels include biogas (from animal and agricultural wastes, wastewater plants, and landfills) as well as syngas (from the gasification of biomass, municipal solid wastes, construction wastes, and refinery residuals). The primary challenge to using gaseous opportunity fuels is that their composition and combustion performance differ significantly from those of conventional fuels such as natural gas and refinery fuel gas. An effective fuel-flexible burner must accept fuels that range widely in quality and change in composition over time, often rapidly. In Phase 1 of this project, the team applied computational fluid dynamics analysis to optimize the prototype burners aerodynamic, combustion, heat transfer, and emissions performance. In Phase 2, full-scale testing and refinement of two prototype burners were conducted in test furnaces at Zeecos offices in Broken Arrow, OK. These tests demonstrated that the full range of conventional and opportunity fuels could be utilized by the projects burner while achieving robust flame stability and very low levels of air pollutant emissions. In Phase 3, the team retrofitted three fuel-flexible burners into a fired heater at a Shell plant and demonstrated the projects technology over a 6-month period. The project burners performed well during this period. They remain in commercial service at the Shell plant. Through this work, an improved understanding of flame stabilization mechanisms was gained. Also, methods for accommodating a wide range of fuel compositions were developed. This knowledge facilitated the commercialization of a new generation of burners that are suitable for the fuels of the future.

  3. BA in VISUAL ARTS: Illustration Emphasis (488043) MAP Sheet Department of Visual Arts

    E-Print Network [OSTI]

    Olsen Jr., Dan R.

    requirements for admission to this major. Admission to the Department of Visual Arts does not guarantee

  4. BA in VISUAL ARTS: Illustration Emphasis (488043) Map Sheet Department of Visual Arts

    E-Print Network [OSTI]

    Olsen Jr., Dan R.

    requirements for admission to this major. Admission to the Department of Visual Arts does not guarantee

  5. Allocation of Energy Use LCA Case Studies LCA Case Studies Allocation of Energy Use in Petroleum Refineries to Petroleum Products Implications for Life-Cycle Energy Use and Emission Inventory of Petroleum Transportation Fuels

    E-Print Network [OSTI]

    Michael Wang; Hanjie Lee; John Molburg

    Aim, Scope, and Background. Studies to evaluate the energy and emission impacts of vehicle/fuel systems have to address allocation of the energy use and emissions associated with petroleum refineries to various petroleum products because refineries produce multiple products. The allocation is needed in evaluating energy and emission effects of individual transportation fuels. Allocation methods used so far for petroleum-based fuels (e.g., gasoline, diesel, and liquefied petroleum gas [LPG]) are based primarily on mass, energy content, or market value shares of individual fuels from a given refinery. The aggregate approach at the refinery level is unable to account for the energy use and emission differences associated with producing individual fuels at the next sub-level: individual refining processes within a refinery. The approach ignores the fact that different refinery products

  6. Technical and operational overview of the C[sub 4] Oleflex process at Valero refinery

    SciTech Connect (OSTI)

    Hohnholt, J.F.; Payne, D. (Valero Refining Co., Corpus Christi, TX (United States)); Gregor, J.; Smith, E. (UOP, Des Plaines, IL (United States))

    1994-01-01T23:59:59.000Z

    Changes in gasoline composition stemming from the 1990 Clean Air Act (CAA) Amendments prompted Valero Energy Corporation to evaluate options for producing reformulated gasoline. The evaluation culminated in a project to upgrade butanes into methyl tertiary butyl ether (MTBE). Technology selection focused on the dehydrogenation of isobutane, and the UOP Oleflex process was selected. The MTBE project was implemented in 34 months and was $3 million under budget. The guaranteed MTBE production of 12,500 BPSD was achieved within one month of mechanical completion and has since reached 15,000 BPSD. Even at the low MTBE prices prevailing in late 1993, the butane upgrading project contributed significantly to Valero Refinery's overall profitability. Worldwide demand is expected to increase MTBE prices in 1996, thereby further increasing profits. The paper describes the project evaluation activities which led to the selection of the Oleflex process, engineering and construction, the MTBE complex start-up and operation, the Valero MTBE complex performance, and future plans. The paper also discusses feedstock utilization efficiency and MTBE market analysis.

  7. Gasification of refinery sludge in an updraft reactor for syngas production

    SciTech Connect (OSTI)

    Ahmed, Reem; Eldmerdash, Usama [Department of Chemical Engineering, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, 31750 Tronoh, Perak (Malaysia); Sinnathambi, Chandra M., E-mail: chandro@petronas.com.my [Fundamental and Applied Sciences Department, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, 31750 Tronoh, Perak (Malaysia)

    2014-10-24T23:59:59.000Z

    The study probes into the investigation on gasification of dry refinery sludge. The details of the study includes; influence of operation time, oxidation temperature and equivalence ratios on carbon gas conversion rate, gasification efficiency, heating value and fuel gas yield are presented. The results show that, the oxidation temperature increased sharply up to 858C as the operating time increased up to 36 min then bridging occurred at 39 min which cause drop in reaction temperature up to 819 C. This bridging was found to affect also the syngas compositions, meanwhile as the temperature decreased the CO, H{sub 2}, CH{sub 4} compositions are also found to be decreases. Higher temperature catalyzed the reduction reaction (CO{sub 2}+C?=?450?2CO), and accelerated the carbon conversion and gasification efficiencies, resulted in more solid fuel is converted to a high heating value gas fuel. The equivalence ratio of 0.195 was found to be the optimum value for carbon conversion and cold gas efficiencies, high heating value of gas, and fuel gas yield to reach their maximum values of 96.1 % and 53.7 %, 5.42 MJ Nm{sup ?3} of, and 2.5 Nm{sup 3} kg{sup ?1} respectively.

  8. Summary of the proceedings of the workshop on the refinery of the future

    SciTech Connect (OSTI)

    Not Available

    1994-06-01T23:59:59.000Z

    This report on the Workshop on the Refinery of the Future has been prepared for participants to provide them with a succinct summary of the presentations, deliberations, and discussions. In preparing the summary, we have striven to capture the key findings (conclusions) and highlight the issues and concerns raised during the plenary and breakout sessions. The presentation of the summary of the proceedings follows the final workshop agenda, which is given in Section I; each section is tabbed to facilitate access to specific workshop topics. The material presented relies heavily on the outline summaries prepared and presented by the Plenary Session Chairman and the Facilitators for each breakout group. These summaries are included essentially as presented. In addition, individuals were assigned to take notes during each session; these notes were used to reconstruct critical issues that were discussed in more detail. The key comments made by the participants, which tended to represent the range of views expressed relative to the issues, are presented immediately following the facilitator`s summary outline in order to convey the flavor of the discussions. The comments are not attributed to individuals, since in many instances they represent a composite of several similar views expressed during the discussion. The facilitators were asked to review the writeups describing the outcomes of their sessions for accuracy and content; their suggested changes were incorporated. Every effort has thus been made to reconstruct the views expressed as accurately as possible; however, errors and/or misinterpretations undoubtedly have occurred.

  9. Cracking of simulated oil refinery off-gas over a coal char, petroleum coke, and quartz

    SciTech Connect (OSTI)

    Yuan Zhang; Jin-hu Wu; Dong-ke Zhang [Chinese Academy of Sciences, Taiyuan (China). Institute of Coal Chemistry

    2008-03-15T23:59:59.000Z

    The cracking of oil refinery off-gas, simulated with a gas mixture containing methane (51%), ethylene (21.4%), ethane (21.1%), and propane (6.5%), over a coal char, petroleum coke, and quartz, respectively, has been studied in a fixed bed reactor. The experiments were performed at temperatures between 850 and 1000{sup o}C and at atmospheric pressure. The results show that the conversions of all species considered increased with increasing temperature. Ethane and propane completely decomposed over all three bed materials in the temperature range investigated. However, the higher initial conversion rates of methane and ethylene cracking at all temperatures were observed only over the coal char and not on the petroleum coke and quartz, indicating a significant catalytic effect of the coal char on methane and ethylene cracking. Methane and ethylene conversions decreased with reaction time due to deactivation of the coal char by carbon deposition on the char surface and, in the later stage of a cracking experiment, became negative, suggesting that methane and ethylene had been formed during the cracking of ethane and propane. 16 refs., 13 figs., 2 tabs.

  10. Production of ethanol from refinery waste gases. Final report, April 1994--July 1997

    SciTech Connect (OSTI)

    Arora, D.; Basu, R.; Breshears, F.S.; Gaines, L.D.; Hays, K.S.; Phillips, J.R.; Wikstrom, C.V.; Clausen, E.C.; Gaddy, J.L.

    1997-08-01T23:59:59.000Z

    The objective of this program was to develop a commercial process for producing ethanol from refinery waste gases. this report presents results from the development phases. The major focus of this work was the preparation of the prototype design which will demonstrate this technology in a 2.5 lb/hr ethanol production facility. Additional areas of focus included efforts in obtaining an industrial partner to help finance the prototype, and advanced engineering experiments concentrating on process optimization in various areas needing future development and optimization. The advanced engineering experiments were performed in the laboratory in these areas: treatment and use of recycle water from distillation back to fermentation; alternative methods of removing cells from the fermentation broth; the fermentation of streams containing CO{sub 2}/H{sub 2} alone, with little to no CO present; dealing with methanogen contaminants that are capable of fermenting CO{sub 2} and H{sub 2} to methane; and acetate tolerance by the culture. Results from the design, industrial partner search and the laboratory R&D efforts are discussed in this report.

  11. antibiotic ramoplanin illustrates: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NOAA, 7 32 ILLUSTRATING MATHEMATICS USING 3D PRINTERS CiteSeer Summary: Abstract. 3D printing technology can help to visualize proofs in mathematics. In this document we aim to...

  12. A map of the universe

    SciTech Connect (OSTI)

    Gott III, J. Richard; Juric, Mario; Schlegel, David; Hoyle, Fiona; Vogeley, Michael; Tegmark, Max; Bahcall, Neta; Brinkmann, Jon

    2003-10-20T23:59:59.000Z

    We have produced a new conformal map of the universe illustrating recent discoveries, ranging from Kuiper belt objects in the Solar system, to the galaxies and quasars from the Sloan Digital Sky Survey. This map projection, based on the logarithm map of the complex plane, preserves shapes locally, and yet is able to display the entire range of astronomical scales from the Earth s neighborhood to the cosmic microwave background. The conformal nature of the projection, preserving shapes locally, may be of particular use for analyzing large scale structure. Prominent in the map is a Sloan Great Wall of galaxies 1.37 billion light years long, 80 percent longer than the Great Wall discovered by Geller and Huchra and therefore the largest observed structure in the universe.

  13. A 39 year follow-up of the UK oil refinery and distribution centre studies: results for kidney cancer and leukaemia. Environ Health Perspect Suppl 101(Suppl

    E-Print Network [OSTI]

    Lesley Rushton

    1993-01-01T23:59:59.000Z

    This paper presents briefly some of the principal results of a mortality analysis of a cohort of workers employed for at least 1 year between 1950 and 1975 at eight oil refineries and approximately 750 distribution centers in the U.K, together with detailed results for kidney cancer and leukemia. Over 99 % of the workers were successfully traced. Their mortality was compared with that of all males in the national population. The mortality from all causes of death is lower than that of the comparison population in both studies, and reduced mortality is also found for many of the major nonmalignant causes of death. In the refinery study, some increased mortality patterns are found for diseases of the arteries, and no healthy worker effect is found in the distribution center study for ischemic heart disease. Mortality from all neoplasms is lower than expected overall in both studies, largely due to a deficit of deaths from malignant neoplasm of the lung. Mortality from malignant neoplasm of the kidney is increased overall in the distribution center study, and in drivers in particular. The mortality from this disease increases with increased time since first exposure. The observed deaths from leukemia are slightly less than expected in the refinery study and slightly more than expected in the distribution center study. One refinery shows increased mortality due to in myeloid leukemia, and mortality is increased among refinery operators. Mortality is also raised in distribution center drivers, particularly for myeloid leukemias, including acute myeloid leukemia.

  14. WASTE INCINERATION wr090203 Activity 090203 SNAP CODE: 090203 SOURCE ACTIVITY TITLE: WASTE INCINERATION Flaring in Oil Refinery NOSE CODE: 109.03.11 NFR CODE:

    E-Print Network [OSTI]

    So Nox; Nmvoc Ch; Co Co; No Nh

    Flares are commonly used during petroleum refining for the safe disposal of waste gases during process upsets (e.g., start-up, shut-down, system blow-down) and emergencies to combust the organic content of waste emission streams without recovering/using the associated energy. 2 CONTRIBUTION TO TOTAL EMISSIONS Although flaring emission estimates are approximate, total hydrocarbon emissions from flaring at Canadian petroleum refineries during 1988 represented about 0.1 % of the refinery sector process and fugitive emissions that also included petroleum marketing emissions (CPPE, 1990). Thus the flaring operation at refineries is estimated to contribute a very small fraction of the total HC emissions in Canada. Emissions from flaring activities may also include: particulate, SOx, NOx, CO and other NMVOC. The CO2 contribution of both miscellaneous vent and flare emission sources represented approximately 9 % of the total petroleum refinery SO2 emission in Canada during 1988. Emissions estimates from flaring in petroleum refineries as reported in the CORINAIR90 inventory are summarised in Table 1. Table 1: Contribution to total emissions of the CORINAIR90 inventory (28 countries) Source-activity SNAP-code Contribution to total emissions [%

  15. Conversion of high carbon refinery by-products. Quarterly report, January 1--March 31, 1996

    SciTech Connect (OSTI)

    Katta, S.; Henningsen, G.; Lin, Y.Y.; O`Donnell, J.

    1996-04-26T23:59:59.000Z

    The overall objective of the project is to demonstrate that a partial oxidation system, which utilizes a transport reactor, is a viable means of converting refinery wastes, byproducts, and other low value materials into valuable products. The primary product would be a high quality fuel gas, which could also be used as a source of hydrogen. The concept involves subjecting the hydrocarbon feed to pyrolysis and steam gasification in a circulating bed of solids. Carbon residue formed during pyrolysis, as well as metals in the feed, are captured by the circulating solids which are returned to the bottom of the transport reactor. Air or oxygen is introduced in this lower zone and sufficient carbon is burned, sub-stoichiometrically, to provide the necessary heat for the endothermic pyrolysis and gasification reactions. The hot solids and gases leaving this zone pass upward to contact the feed material and continue the gasification process. The Transport Reactor Test Unit (TRTU) was commissioned to conduct studies on pyrolysis of Rose Bottoms using spent FCC (Fluid Catalytic Cracker) catalyst as the circulating medium and gasification of this carbon over a temperature range of 1,600 to 1,700 F. The Rose Bottoms (Residuum Oil Supercritical Extraction) was produced in the Rose unit. Studies were done in the Bench Scale Reactor Unit (BRU) to develop suitable catalyst formulations and to study the steam reforming of methane and propane in support of the experiments to be conducted in the TRTU. Studies were also conducted on gasification of coke breeze, petroleum cokes and carbon deposited on FCC catalyst. The catalytic effect of potassium on gasification of these solids was studied. Studies were conducted in the CFS (cold flow simulator) to investigate flow problems experienced in the TRTU. Results from these studies are presented in this report.

  16. Economic impacts of oil spills: Spill unit costs for tankers, pipelines, refineries, and offshore facilities. [Task 1, Final report

    SciTech Connect (OSTI)

    Not Available

    1993-10-15T23:59:59.000Z

    The impacts of oil spills -- ranging from the large, widely publicized Exxon Valdez tanker incident to smaller pipeline and refinery spills -- have been costly to both the oil industry and the public. For example, the estimated costs to Exxon of the Valdez tanker spill are on the order of $4 billion, including $2.8 billion (in 1993 dollars) for direct cleanup costs and $1.125 billion (in 1992 dollars) for settlement of damages claims caused by the spill. Application of contingent valuation costs and civil lawsuits pending in the State of Alaska could raise these costs appreciably. Even the costs of the much smaller 1991 oil spill at Texaco`s refinery near Anacortes, Washington led to costs of $8 to 9 million. As a result, inexpensive waming, response and remediation technologies could lower oil spin costs, helping both the oil industry, the associated marine industries, and the environment. One means for reducing the impact and costs of oil spills is to undertake research and development on key aspects of the oil spill prevention, warming, and response and remediation systems. To target these funds to their best use, it is important to have sound data on the nature and size of spills, their likely occurrence and their unit costs. This information could then allow scarce R&D dollars to be spent on areas and activities having the largest impact. This report is intended to provide the ``unit cost`` portion of this crucial information. The report examines the three key components of the US oil supply system, namely, tankers and barges; pipelines and refineries; and offshore production facilities. The specific purpose of the study was to establish the unit costs of oil spills. By manipulating this key information into a larger matrix that includes the size and frequency of occurrence of oil spills, it will be possible` to estimate the likely future impacts, costs, and sources of oil spills.

  17. Standard practice for evaluating and qualifying oil field and refinery corrosion inhibitors using the rotating cylinder electrode

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2006-01-01T23:59:59.000Z

    1.1 This practice covers a generally accepted procedure to use the rotating cylinder electrode (RCE) for evaluating corrosion inhibitors for oil field and refinery applications in defined flow conditions. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  18. Automating Landscape Illustration with Pen and Ink Style Rendering

    E-Print Network [OSTI]

    Mower, James E.

    Automating Landscape Illustration with Pen and Ink Style Rendering James E. Mower ABSTRACT from digital elevation models (DEMs) to direct the rendering of landform features in the style of pen-dimensional (2D) rendered image processing techniques, object space procedures operate directly on 3

  19. Illustration: Sean Kelly Back to basics for the

    E-Print Network [OSTI]

    Wilson, W. Stephen

    Illustration: Sean Kelly Back to basics for the "division clueless" DECEMBER 6, 2010 | BY LISA research in algebraic topology to question basic math education. At two well- regarded private schools to only 31 percent of the 2006 students. As another experiment, Wilson gave a short test of basic math

  20. Illustrative Display of Hidden Iso-Surface Structures Jan Fischer

    E-Print Network [OSTI]

    Bartz, Dirk

    Illustrative Display of Hidden Iso-Surface Structures Jan Fischer Visual Computing for Medicine is represented by black silhouettes and hatching. The second layer of the iso-surface is rendered as red is a widespread method for the display of volume datasets. It is based on the extraction of polygonal iso

  1. Spatial Disaggregation of CO2 Emissions for the State of California

    E-Print Network [OSTI]

    de la Rue du Can, Stephane

    2008-01-01T23:59:59.000Z

    www.energy.ca.gov/maps/refinery_locations.html Appendix 3.Administration (EIA), 2007b. Refinery Capacity Databy individual refinery as of January 1, 2007. Washington,

  2. K. S. Telang, R. W. Pike, F. C. Knopf, J. R. Hopper, J. Saleh, S. Waghchoure, S. C. Hedge and T. A. Hertwig,"An Advanced Process Analysis System for Improving Chemical and Refinery Processes," Computers and Chemical Engineering, Vol. 23, p. S727-730 (1999

    E-Print Network [OSTI]

    Pike, Ralph W.

    . Hertwig,"An Advanced Process Analysis System for Improving Chemical and Refinery Processes," Computers Chemical and Refinery Processes K. S. Telang, X. Chen, R. W. Pike and F. C. Knopf Louisiana State and refineries for process improvements. The system integrates programs for on-line optimization, chemical

  3. Patent Overlay Mapping: Visualizing Technological Distance

    E-Print Network [OSTI]

    Kay, Luciano; Youtie, Jan; Porter, Alan L; Rafols, Ismael

    2012-01-01T23:59:59.000Z

    The purpose of this paper is to present a new global patent map that represents all technological categories, and a method to locate patent data of individual organizations and technological fields on the global map. This second patent overlay map technique is shown to be of potential interest to support competitive intelligence and policy decision-making. The global patent map is based on similarities in citing-to-cited relationships between categories of the International Patent Classification (IPC) of European Patent Office (EPO) patents from 2000 to 2006. This patent dataset, extracted from PatStat database, represents more than 760,000 patent records in more than 400 IPC categories. To illustrate the kind of analytical support offered by this approach, the paper shows the overlay of nanotechnology-related patenting activities of two companies and two different nanotechnology subfields on to the global patent map. The exercise shows the potential of patent overlay maps to visualize technological areas and...

  4. Radioisotope Thermophotovoltaic (RTPV) Generator and Its Applicability to an Illustrative Space Mission

    SciTech Connect (OSTI)

    Schock, A.; Mukunda, M.; Or, T.; Kumar, V.; Summers, G.

    1994-02-14T23:59:59.000Z

    The paper describes the results of a DOE-sponsored design study of a radioisotope thermophotovoltaic generator (RTPV), to complement similar studies of Radioisotope Thermoelectric Generators (RTGs) and Stirling Generators (RSGs) previously published by the author. Instead of conducting a generic study, it was decided to focus the design effort by directing it at a specific illustrative space mission, Pluto Fast Flyby (PFF). That mission, under study by JPL, envisages a direct eight-year flight to Pluto (the only unexplored planet in the solar system), followed by comprehensive mapping, surface composition, and atmospheric structure measurements during a brief flyby of the planet and its moon Charon, and transmission of the recorded science data to Earth during a post-encounter cruise lasting up to one year.

  5. Public health assessment for US Smelter and Lead Refinery, Inc. (A/K/A USS Lead Refinery Inc. ) East Chicago, Lake County, Indiana, Region 5. Cerclis no. IND047030226. Final report

    SciTech Connect (OSTI)

    Not Available

    1994-08-24T23:59:59.000Z

    The U.S. Smelter and Lead Refinery, Inc. (USS Lead), in East Chicago, Indiana, has been operating as a primary and secondary smelting facility since 1906. Wastes which were produced during smelting operations are calcium sulfate sludge, blast furnace flue-dust, baghouse bags, rubber and plastic battery casings, and waste slag. Limited sampling information is available, and indicates that on-site soils and wastes are contaminated with lead and other metals. Additional sampling off-site surface soils indicate that the contamination has spread off-site as far as one-half mile from the site. Surface water and sediment on-site has also become contaminated with lead and other metals, as well as waste oil. Based on the completed exposure pathways to lead through soil ingestion and dust inhalation, the Agency for Toxic Substances and Disease Registry concludes that contamination from the USS Lead site is a public health hazard.

  6. Illustrative Scenarios Tool (European Union) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, search OpenEIHesperia,IDGWP Wind FarmInformationIllinois/WindIllustrative

  7. Effective monitoring of non-chromate chemical treatment programs for refinery cooling systems using sewage water as make-up

    SciTech Connect (OSTI)

    AlMajnouni, A.D.; Jaffer, A.E. [Saudi Aramco, Dhahran (Saudi Arabia)

    1996-08-01T23:59:59.000Z

    Treated sewage water as make-up to the cooling tower requires novel approaches to control potential cooling water problems common to refineries besides meeting environmental regulations. An intensive field study was conducted to evaluate the effectiveness of non-chromate treatment programs. On-line cleaning of the exchangers occurred prior to instituting the new chemical treatment program. Low carbon steel corrosion rates with minimal deposition was achieved. Microbiological fouling was controlled with chlorination and non-oxidizing biocide program. Field results are presented which compare the efficacy of these proprietary treatments to control corrosion and inhibit scale and fouling. Analytical results which provide a comprehensive performance evaluation of a new non-chromate chemical treatment program are presented.

  8. Site Map

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol HomeFacebookScholarship Fund3 Outlook forSDPPP Individual Permit:Site Map TUNL

  9. Site Map

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > TheNuclearHomelandMultivariateSite Map Main Menu About the ALS ALS@20

  10. Map ID

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn12electronEnergy Manufacturing Energy andYou areID 90 Map

  11. Carbon Capture and Sequestration (via Enhanced Oil Recovery) from a Hydrogen Production Facility in an Oil Refinery

    SciTech Connect (OSTI)

    Stewart Mehlman

    2010-06-16T23:59:59.000Z

    The project proposed a commercial demonstration of advanced technologies that would capture and sequester CO2 emissions from an existing hydrogen production facility in an oil refinery into underground formations in combination with Enhanced Oil Recovery (EOR). The project is led by Praxair, Inc., with other project participants: BP Products North America Inc., Denbury Onshore, LLC (Denbury), and Gulf Coast Carbon Center (GCCC) at the Bureau of Economic Geology of The University of Texas at Austin. The project is located at the BP Refinery at Texas City, Texas. Praxair owns and operates a large hydrogen production facility within the refinery. As part of the project, Praxair would construct a CO2 capture and compression facility. The project aimed at demonstrating a novel vacuum pressure swing adsorption (VPSA) based technology to remove CO2 from the Steam Methane Reformers (SMR) process gas. The captured CO2 would be purified using refrigerated partial condensation separation (i.e., cold box). Denbury would purchase the CO2 from the project and inject the CO2 as part of its independent commercial EOR projects. The Gulf Coast Carbon Center at the Bureau of Economic Geology, a unit of University of Texas at Austin, would manage the research monitoring, verification and accounting (MVA) project for the sequestered CO2, in conjunction with Denbury. The sequestration and associated MVA activities would be carried out in the Hastings field at Brazoria County, TX. The project would exceed DOEs target of capturing one million tons of CO2 per year (MTPY) by 2015. Phase 1 of the project (Project Definition) is being completed. The key objective of Phase 1 is to define the project in sufficient detail to enable an economic decision with regard to proceeding with Phase 2. This topical report summarizes the administrative, programmatic and technical accomplishments completed in Phase 1 of the project. It describes the work relative to project technical and design activities (associated with CO2 capture technologies and geologic sequestration MVA), and Environmental Information Volume. Specific accomplishments of this Phase include: 1. Finalization of the Project Management Plan 2. Development of engineering designs in sufficient detail for defining project performance and costs 3. Preparation of Environmental Information Volume 4. Completion of Hazard Identification Studies 5. Completion of control cost estimates and preparation of business plan During the Phase 1 detailed cost estimate, project costs increased substantially from the previous estimate. Furthermore, the detailed risk assessment identified integration risks associated with potentially impacting the steam methane reformer operation. While the Phase 1 work identified ways to mitigate these integration risks satisfactorily from an operational perspective, the associated costs and potential schedule impacts contributed to the decision not to proceed to Phase 2. We have concluded that the project costs and integration risks at Texas City are not commensurate with the potential benefits of the project at this time.

  12. Methanol production from eucalyptus wood chips. Attachment III. Florida's eucalyptus energy farm and methanol refinery: the background environment

    SciTech Connect (OSTI)

    Fishkind, H.H.

    1982-04-01T23:59:59.000Z

    A wide array of general background information is presented on the Central Florida area in which the eucalyptus energy plantation and methanol refinery will be located. Five counties in Central Florida may be affected by the project, DeSoto, Hardee, Hillsborough, Manatee, and Polk. The human resources of the area are reviewed. Included are overviews of population demographic and economic trends. Land use patterns and the transportation are system described, and the region's archeological and recreational resources are evaluated. The region's air quality is emphasized. The overall climate is described along with noise and air shed properties. An analysis of the region's water resources is included. Ground water is discussed first followed by an analysis of surface water. Then the overall quality and water supply/demand balance for the area is evaluated. An overview of the region's biota is presented. Included here are discussions of the general ecosystems in Central Florida, and an analysis of areas with important biological significance. Finally, land resources are examined.

  13. refinery BP Oil's Alliance refinery in Louisiana

    E-Print Network [OSTI]

    unknown authors

    is the focus of an environmental control program, which is also being implemented in other BP plants

  14. Refinery Yield of Liquefied Refinery Gases

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site.1 Relative Standard Errors for TableCORPORATION

  15. Geologic Maps Geology 200

    E-Print Network [OSTI]

    Kammer, Thomas

    Geologic Maps Geology 200 Geology for Environmental Scientists #12;Geologic Map of the US #12;Symbols found on geologic maps #12;Horizontal Strata #12;Geologic map of part of the Grand Canyon. Each color represents a different formation. #12;Inclined Strata #12;Dome #12;Geologic map of the Black Hills

  16. Maps of Selected State Subdivisions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Crude Oil, Natural Gas, and Natural Gas Liquids Proved Reserves Summary Maps of Selected State Subdivisions Map 1: Alaska Map 2: California Map 3: Louisiana Map 4: New Mexico Map...

  17. Geothermal: Site Map

    Office of Scientific and Technical Information (OSTI)

    Site Map Geothermal Technologies Legacy Collection HelpFAQ | Site Map | Contact Us HomeBasic Search About Publications Advanced Search New Hot Docs News Related Links Site Map...

  18. Directions and Maps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Directions & Maps Plan Your Visit Visit About the Museum Museum Hours Directions & Maps When to Visit Arrange for a Visit Around Los Alamos Contact Us invisible utility element...

  19. Design, Analysis, and Optimization of a Radioisotope Thermophotovoltaic (RTPV) Generator, and its Applicability to an Illustrative Space Mission

    SciTech Connect (OSTI)

    Schock, Alfred; Mukunda, Meera; Or, Chuen T; Kumar, Vasanth; Summers, G.

    1994-10-01T23:59:59.000Z

    Paper presented at the 45th Congress of the IAF in Jerusalem, Israel, October 1994. The paper describes the results of a DOE-sponsored design study of a radioisotope thermophotovoltaic generator (RTPV), to complement similar studies of Radioisotope Thermoelectric Generators (RTGs) and Stirling Generators (RSGs) previously published by the authors. To focus the design effort, it was decided to direct it at a specific illustrative space mission, Pluto Fast Flyby (PFF). That mission, under study by the JPL, envisages a direct eight to nine-year flight to Pluto (the only unexplored planet in the solar system), followed by comprehensive mapping, surface composition, and atmospheric structure measurements during a brief flyby of the planet and its moon Charon, and transmission of the recorded science data to Earth during a six-week post-encounter cruise.

  20. Career Map: Instrumentation Coordinator

    Broader source: Energy.gov [DOE]

    The Wind Program's Career Map provides job description information for Instrumentation Coordinator positions.

  1. Pitfalls of digital maps

    SciTech Connect (OSTI)

    Brewer, B.B.

    1986-05-01T23:59:59.000Z

    Computers allow us to combine maps from different sources and different scales more easily. In the past, these variations had to be ignored or only partly solved. With the advent of computers and increased digital maps, these inconsistencies become glaring errors that should no longer be ignored. The final success of a project largely lies on the accuracy and validity of its maps. This paper discusses problems and solutions associated with trying to tie maps together. The paper concentrates on the importance of understanding map projections and the problems involved in adding new maps to existing digital maps.

  2. On-line parameter estimation via algebraic method: An experimental illustration.

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    identification. This algorithm is illustrated experimentally on a Permanent Magnet Stepper Motor (PMSM identification, Algebraic method, Magnetic bearing, PMSM. I. INTRODUCTION This article is concerned

  3. Standard practice for evaluation of disbonding of bimetallic stainless alloy/steel plate for use in high-pressure, high-temperature refinery hydrogen service

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2001-01-01T23:59:59.000Z

    1.1 This practice covers a procedure for the evaluation of disbonding of bimetallic stainless alloy/steel plate for use in refinery high-pressure/high-temperature (HP/HT) gaseous hydrogen service. It includes procedures to (1) produce suitable laboratory test specimens, (2) obtain hydrogen charging conditions in the laboratory that are similar to those found in refinery HP/HT hydrogen gas service for evaluation of bimetallic specimens exposed to these environments, and (3) perform analysis of the test data. The purpose of this practice is to allow for comparison of data among test laboratories on the resistance of bimetallic stainless alloy/steels to hydrogen-induced disbonding (HID). 1.2 This practice applies primarily to bimetallic products fabricated by weld overlay of stainless alloy onto a steel substrate. Most of the information developed using this practice has been obtained for such materials. The procedures described herein, may also be appropriate for evaluation of hot roll bonded, explosive bonded...

  4. Method for mapping charge pulses in semiconductor radiation detectors

    SciTech Connect (OSTI)

    Prettyman, T.H.

    1998-12-01T23:59:59.000Z

    An efficient method for determining the distribution of charge pulses produced by semiconductor detectors is presented. The method is based on a quasi-steady-state model for semiconductor detector operation. A complete description of the model and underlying assumptions is given. Mapping of charge pulses is accomplished by solving an adjoint carrier continuity equation. The solution of the adjoint equation yields Green`s function, a time- and position-dependent map that contains all possible charge pulses that can be produced by the detector for charge generated at discrete locations (e.g., by gamma-ray interactions). Because the map is generated by solving a single, time-dependent problem, the potential for reduction in computational effort over direct mapping methods is significant, particularly for detectors with complex electrode structures. In this paper, the adjoint equation is derived and the mapping method is illustrated for a simple case.

  5. AN EXTRATROPICAL CYCLONE ATLAS A tool for illustrating cyclone structure and evolution characteristics

    E-Print Network [OSTI]

    Dacre, Helen

    1 AN EXTRATROPICAL CYCLONE ATLAS A tool for illustrating cyclone structure and evolution CYCLONE ATLAS A tool for illustrating cyclone structure and evolution characteristics BY H. F. DACRE, M. K in determining the day-to-day weather conditions in many parts of the world through their associated wind

  6. "Ocean Life" (In Color), by Norman B. Marshall, 290 illustrations, many drawn from

    E-Print Network [OSTI]

    ~&.LIBOOKS "Ocean Life" (In Color), by Norman B. Marshall, 290 illustrations, many drawn from living specimens by Olga Marshall, 214 p., $4.95. The Macmillan Co., Publishe rs, 866 Third Avenue, New York, N. Y. 10022. A handbook of life in the oceans, hand- somely illustrated in color. Dr. Marshall

  7. UNIVERSITY OF VIRGINIA Illustration of Mr. Taylor's 1-Life Charitable Gift Annuity Funded with Cash

    E-Print Network [OSTI]

    Acton, Scott

    UNIVERSITY OF VIRGINIA Illustration of Mr. Taylor's 1-Life Charitable Gift Annuity Funded with Cash,803.40 Annuity $1,740.00 Tax-free Portion $1,386.78 Ordinary Income * $353.22 Quarterly Payment $435.00 Total Rate is 1.6% The information in this chart is of a general nature and for illustration purposes only

  8. David Alciatore, PhD ("Dr. Dave") ILLUSTRATED PRINCIPLES "Beer-goggle Effects"

    E-Print Network [OSTI]

    Alciatore, David G.

    David Alciatore, PhD ("Dr. Dave") ILLUSTRATED PRINCIPLES "Beer-goggle Effects" Note: Supporting and drinking beer with friends at bars and pool halls. People sometimes complain to me that I use too many shown is the "beer goggle" curve that illustrates the level of desire for unattractive members

  9. Introgression & mapping Fiber cell

    E-Print Network [OSTI]

    Germplasm Introgression Genomics & mapping Fiber cell initiation Radiation hybrid (RH) mapping and breeding. Research activities commonly include plant breeding, genetics, genomics, cytogenetics, molecular methods. (C, S) Contribute uniquely to genomics and its relevance to genetic improvement (C,S) Harness

  10. SERC Grants Interactive Map

    Broader source: Energy.gov [DOE]

    View SERC Grants in a larger map. To report corrections, please email SustainableEnergyWAP@ee.doe.gov.

  11. National Hydropower Map

    Broader source: Energy.gov [DOE]

    High-resolution map produced by Oak Ridge National Laboratory showing hydropower resources throughout the United States.

  12. WIPP Projects Interative Map

    Broader source: Energy.gov [DOE]

    View WIPP Projects in a larger map. To report corrections, please emailWeatherizationInnovation@ee.doe.gov.

  13. Refinery Capacity Report

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    by State as of January 1, 2006 PDF 5 Refiners' Operable Atmospheric Crude Oil Distillation Capacity as of January 1, 2006 PDF 6 Operable Crude Oil and Downstream Charge...

  14. Hydrogen Generation for Refineries

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Single Cycle Shown for ATB SteamCarbon 3 * ATB reforming * Steamcarbon 3 * Syngas generated during reforming * 70% H 2 * 20% CO * Syngas composition agrees with...

  15. Refinery Capacity Report

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122Commercial ConsumersThousand CubicCubic Feet) Yeara 436INCIDENCE OF AN2009

  16. Refinery Capacity Report

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site.1 Relative Standard Errors for Table 1.1;"21

  17. Refinery Capacity Report

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site.1 Relative Standard Errors for Table 1.1;"21Capacity Report

  18. Refinery Capacity Report

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site.1 Relative Standard Errors for Table 1.1;"21Capacity Report5

  19. Refinery Capacity Report

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site.1 Relative Standard Errors for Table 1.1;"21Capacity

  20. Refinery Capacity Report

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site.1 Relative Standard Errors for Table 1.1;"21Capacity Operable

  1. Refinery Capacity Report

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site.1 Relative Standard Errors for Table 1.1;"21Capacity

  2. Refinery Capacity Report

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site.1 Relative Standard Errors for Table 1.1;"21Capacityof Last

  3. Refinery Capacity Report

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site.1 Relative Standard Errors for Table 1.1;"21Capacityof

  4. Refinery Capacity Report

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site.1 Relative Standard Errors for Table 1.1;"21CapacityofVacuum

  5. Refinery Capacity Report

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site.1 Relative Standard Errors for Table

  6. Refinery Capacity Report

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site.1 Relative Standard Errors for TableCORPORATION / Refiner /

  7. Refinery Capacity Report

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site.1 Relative Standard Errors for TableCORPORATION / Refiner

  8. Refinery Capacity Report

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site.1 Relative Standard Errors for TableCORPORATION / RefinerAlkylates

  9. Refinery Capacity Report

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site.1 Relative Standard Errors for TableCORPORATION / RefinerAlkylates

  10. Refinery Capacity Report

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site.1 Relative Standard Errors for TableCORPORATION /

  11. Refinery Outages: Fall 2014

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site.1 Relative Standard Errors for TableCORPORATION /Product:

  12. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    Capacity Report June 2014 With Data as of January 1, 2014 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 This report was prepared by...

  13. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for On-Highway4,1,50022,3,,,,6,1,9,1,50022,3,,,,6,1,Decade1 Source:Additions to Capacity onThousand(Dollars2009Rail

  14. Refinery Capacity Report Historical

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for On-Highway4,1,50022,3,,,,6,1,9,1,50022,3,,,,6,1,Decade1 Source:Additions to Capacity onThousand(Dollars2009Rail

  15. Hydrogen Generation for Refineries

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy ChinaofSchaefer To:Department ofOral Testimony ofMonitoring, Protectionof

  16. U.S. Refinery

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1Stocks Nov-14TotalThe Outlook269,023Year JanCrude Oil and Petroleum

  17. U.S. Refinery

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are nowTotal" (Percent) Type: Sulfur Content API GravityDakota" "Fuel, quality",Area: U.S. East Coast (PADD 1) New120,814 136,932 130,902672009Dec-14

  18. ASPECT Emergency Response Chemical and Radiological Mapping

    ScienceCinema (OSTI)

    LANL

    2009-09-01T23:59:59.000Z

    A unique airborne emergency response tool, ASPECT is a Los Alamos/U.S. Environmental Protection Agency project that can put chemical and radiological mapping tools in the air over an accident scene. The name ASPECT is an acronym for Airborne Spectral Photometric Environmental Collection Technology. Update, Sept. 19, 2008: Flying over storm-damaged refineries and chemical factories, a twin-engine plane carrying the ASPECT (Airborne Spectral Photometric Environmental Collection Technology) system has been on duty throughout the recent hurricanes that have swept the Florida and Gulf Coast areas. ASPECT is a project of the U.S. U.S. Environmental Protection Agencys National Decontamination Team. Los Alamos National Laboratory leads a science and technology program supporting the EPA and the ASPECT aircraft. Casting about with a combination of airborne photography and infrared spectroscopy, the highly instrumented plane provides emergency responders on the ground with a clear concept of where danger lies, and the nature of the sometimes-invisible plumes that could otherwise kill them. ASPECT is the nations only 24/7 emergency response aircraft with chemical plume mapping capability. Bob Kroutil of Bioscience Division is the project leader, and while he said the team has put in long hours, both on the ground and in the air, its a worthwhile effort. The plane flew over 320 targeted sites in four days, he noted. Prior to the deployment to the Gulf Coast, the plane had been monitoring the Democratic National Convention in Denver, Colorado. Los Alamos National Laboratory Divisions that are supporting ASPECT include, in addition to B-Division, CTN-5: Networking Engineering and IRM-CAS: Communication, Arts, and Services. Leslie Mansell, CTN-5, and Marilyn Pruitt, IRM-CAS, were recognized the the U.S. EPA for their outstanding support to the hurricane response of Gustav in Louisiana and Ike in Texas. The information from the data collected in the most recent event, Hurricane Ike, was sent to the EPA Region 6 Rapid Needs Assessment and the State of Texas Joint Field Office in Austin, Texas. It appears that though there is considerable damage in Galveston and Texas City, there are fewer chemical leaks than during either hurricanes Katrina or Rita. Specific information gathered from the data was reported out to the U.S. Environmental Protection Agency Headquarters, the Federal Emergency Management Agency, the Department of Homeland Security, and the State of Texas Emergency Management Agency.

  19. Quantitative DNA fiber mapping

    DOE Patents [OSTI]

    Gray, Joe W. (San Francisco, CA); Weier, Heinz-Ulrich G. (Oakland, CA)

    1998-01-01T23:59:59.000Z

    The present invention relates generally to the DNA mapping and sequencing technologies. In particular, the present invention provides enhanced methods and compositions for the physical mapping and positional cloning of genomic DNA. The present invention also provides a useful analytical technique to directly map cloned DNA sequences onto individual stretched DNA molecules.

  20. Quantitive DNA Fiber Mapping

    E-Print Network [OSTI]

    Lu, Chun-Mei

    2009-01-01T23:59:59.000Z

    of California. Lu et al. : DNA Fiber Mapping page - 35 Lu etal. : DNA Fiber Mapping page - 36 a b c d e f g OV P1 cloneSp6 end T7 end Lu et al. : DNA Fiber Mapping page - 37 a b c

  1. Environmental Soil Chemistry Second Edition Environmental Soil Chemistry illustrates fundamental principles of soil

    E-Print Network [OSTI]

    Sparks, Donald L.

    Environmental Soil Chemistry Second Edition Environmental Soil Chemistry illustrates fundamental principles of soil chemistry with respect to environmental reactions between soils and other natural contemporary training in the basics of soil chemistry and applications to real-world environmental concerns

  2. Texas 4-H Public Presentation Guide--Method Demonstations and Illustrated Talks

    E-Print Network [OSTI]

    Howard, Jeff W.; Bading, Charla

    2000-04-17T23:59:59.000Z

    Method demonstrations and illustrated talks are effective ways for 4-H members to share their knowledge and improve their presentation skills. Step-by-step instructions in this publication guide the 4-H'er through the process of planning...

  3. A model for the representation and extraction of visual knowledge from illustrated texts

    E-Print Network [OSTI]

    Koons, David Bruce

    1988-01-01T23:59:59.000Z

    of MASTER OF SCIENCE August 1988 Major Subject: Computer Science A MODEL FOR THE REPRESENTATION AND EXTRACTION OF VISUAL KNOWLEDGE FROM ILLUSTRATED TEXTS A Thesis by DAVID BRUCE KOONS Approved as to style and content by: Bruce H. McCormick (Chair...? and 2) How can this visual knowledge be represented on a computer to allow its application to automated image interpretation? The first question is addressed by an analysis of the relationship between text and figures in Neuroanatomy an illustrated...

  4. Map-likelihood phasing

    SciTech Connect (OSTI)

    Terwilliger, Thomas C., E-mail: terwilliger@lanl.gov [Bioscience Division, Mail Stop M888, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

    2001-12-01T23:59:59.000Z

    A map-likelihood function is described that can yield phase probabilities with very low model bias. The recently developed technique of maximum-likelihood density modification [Terwilliger (2000 ?), Acta Cryst. D56, 965972] allows a calculation of phase probabilities based on the likelihood of the electron-density map to be carried out separately from the calculation of any prior phase probabilities. Here, it is shown that phase-probability distributions calculated from the map-likelihood function alone can be highly accurate and that they show minimal bias towards the phases used to initiate the calculation. Map-likelihood phase probabilities depend upon expected characteristics of the electron-density map, such as a defined solvent region and expected electron-density distributions within the solvent region and the region occupied by a macromolecule. In the simplest case, map-likelihood phase-probability distributions are largely based on the flatness of the solvent region. Though map-likelihood phases can be calculated without prior phase information, they are greatly enhanced by high-quality starting phases. This leads to the technique of prime-and-switch phasing for removing model bias. In prime-and-switch phasing, biased phases such as those from a model are used to prime or initiate map-likelihood phasing, then final phases are obtained from map-likelihood phasing alone. Map-likelihood phasing can be applied in cases with solvent content as low as 30%. Potential applications of map-likelihood phasing include unbiased phase calculation from molecular-replacement models, iterative model building, unbiased electron-density maps for cases where 2F{sub o} ? F{sub c} or ?{sub A}-weighted maps would currently be used, structure validation and ab initio phase determination from solvent masks, non-crystallographic symmetry or other knowledge about expected electron density.

  5. Regularity of mappings inverse to Sobolev mappings

    SciTech Connect (OSTI)

    Vodop'yanov, Sergei K [S.L. Sobolev Institute for Mathematics, Siberian Branch of the Russian Academy of Sciences, Novosibirsk (Russian Federation)

    2012-10-31T23:59:59.000Z

    For homeomorphisms {phi}:{Omega}{yields}{Omega}' on Euclidean domains in R{sup n}, n{>=}2, necessary and sufficient conditions ensuring that the inverse mapping belongs to a Sobolev class are investigated. The result obtained is used to describe a new two-index scale of homeomorphisms in some Sobolev class such that their inverses also form a two-index scale of mappings, in another Sobolev class. This scale involves quasiconformal mappings and also homeomorphisms in the Sobolev class W{sup 1}{sub n-1} such that rankD{phi}(x){<=}n-2 almost everywhere on the zero set of the Jacobian det D{phi}(x). Bibliography: 65 titles.

  6. Mapping in the Cloud: Working with Google Maps and other Mapping Services

    E-Print Network [OSTI]

    Peterson, Michael

    2014-11-19T23:59:59.000Z

    :document.getElementById('map'), /*ID of element on the page where you want the map added*/ zoom:10, /*initial zoom level of map*/ latLng:{lat:39.743943, lng:-105.020089}, /*center of map in latitude/longitude*/ mtype...:'map' /*map type (map)*/ }; /*Construct an instance of MQA.TileMap with the options object*/ window.map = new MQA.TileMap(options); /*An example using the MQA.Poi constructor. You will need to pass in an object containing the lat (Latitude) and lng (Longitude...

  7. Mapping surrogate gasoline compositions into RON/MON space

    SciTech Connect (OSTI)

    Morgan, Neal; Kraft, Markus [Department of Chemical Engineering, University of Cambridge, Cambridge CB2 3RA (United Kingdom); Smallbone, Andrew; Bhave, Amit [Reaction Engineering Solutions Ltd., 61 Canterbury Street, Cambridge CB4 3QG (United Kingdom); Cracknell, Roger; Kalghatgi, Gautam [Shell Global Solutions, Shell Technology Centre Thornton, P.O. Box 1, Chester CH1 3SH (United Kingdom)

    2010-06-15T23:59:59.000Z

    In this paper, new experimentally determined octane numbers (RON and MON) of blends of a tri-component surrogate consisting of toluene, n-heptane, i-octane (called toluene reference fuel TRF) arranged in an augmented simplex design are used to derive a simple response surface model for the octane number of any arbitrary TRF mixture. The model is second-order in its complexity and is shown to be more accurate to the standard ''linear-by-volume'' (LbV) model which is often used when no other information is available. Such observations are due to the existence of both synergistic and antagonistic blending of the octane numbers between the three components. In particular, antagonistic blending of toluene and iso-octane leads to a maximum in sensitivity that lies on the toluene/iso-octane line. The model equations are inverted so as to map from RON/MON space back into composition space. Enabling one to use two simple formulae to determine, for a given fuel with known RON and MON, the volume fractions of toluene, n-heptane and iso-octane to be blended in order to emulate that fuel. HCCI engine simulations using gasoline with a RON of 98.5 and a MON of 88 were simulated using a TRF fuel, blended according to the derived equations to match the RON and MON. The simulations matched the experimentally obtained pressure profiles well, especially when compared to simulations using only PRF fuels which matched the RON or MON. This suggested that the mapping is accurate and that to emulate a refinery gasoline, it is necessary to match not only the RON but also the MON of the fuel. (author)

  8. Approximation of Harmonic Maps and Wave Maps Soren Bartels

    E-Print Network [OSTI]

    Bartels, Soeren

    Approximation of Harmonic Maps and Wave Maps S¨oren Bartels Partial differential equations to certain boundary condtions. If X = then critical points u : N are called harmonic maps into N, ·) = u0, tu(0, ·) = v0. To approximate harmonic maps or wave maps we consider a regular triangula- tion

  9. Turbine fuels from tar-sands bitumen and heavy oil. Volume 2. Phase 3. Process design specifications for a turbine-fuel refinery charging San Ardo heavy crude oil. Final report, 1 June 1985-31 March 1987

    SciTech Connect (OSTI)

    Talbot, A.F.; Swesey, J.R.; Magill, L.G.

    1987-09-01T23:59:59.000Z

    An engineering design was developed for a 50,000-BPSD grass-roots refinery to produce aviation turbine fuel grades JP-4 and JP-8 from San Ardo heavy crude oil. The design was based on the pilot-plant studies described in Phase III - Volume I of this report. The detailed plant design described in this report was used to determine estimated production costs.

  10. Mapping the Nanoscale Landscape

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated Codes |IsLove Your Home and It'llMapping Particle Charges inMappingMapping

  11. Cover illustration courtesy of the Los Angeles County Childhood Lead Poisoning Prevention Program

    E-Print Network [OSTI]

    Cover illustration courtesy of the Los Angeles County Childhood Lead Poisoning Prevention Program Committee on Childhood Lead Poisoning Prevention Edited by Birt Harvey, MD Centers for Disease Control, Director Lead Poisoning Prevention Branch Gary P. Noonan, MPA, Acting Chief U.S. Department of Health

  12. Formal Verification of CHP Specifications with CADP Illustration on an Asynchronous Network-on-Chip

    E-Print Network [OSTI]

    Joseph Fourier Grenoble-I, Université

    Formal Verification of CHP Specifications with CADP Illustration on an Asynchronous Network in the high-level language CHP, by using model checking techniques provided by the CADP toolbox. Our proposal is based on an automatic translation from CHP into LOTOS, the process algebra used in CADP. A translator

  13. Formal Verification of CHP Specifications with CADP, Illustration on an Asynchronous Network-on-Chip

    E-Print Network [OSTI]

    Joseph Fourier Grenoble-I, Université

    Formal Verification of CHP Specifications with CADP, Illustration on an Asynchronous Network of the Presentation · Introduction · Translation from CHP to LOTOS · CADP toolbox overview · Verification of ANOC Context & Objective process calculus CHP Petri nets process calculus LOTOS (CEA/Leti) translation

  14. Billiards Digest February, 2010 David Alciatore, PhD ("Dr. Dave") ILLUSTRATED PRINCIPLES

    E-Print Network [OSTI]

    Alciatore, David G.

    Billiards Digest February, 2010 David Alciatore, PhD ("Dr. Dave") ILLUSTRATED PRINCIPLES "VEPS GEMS the 12-ball or 13-ball, or both, as demonstrated in NV B.68. #12;Billiards Digest February, 2010 8 11 Digest February, 2010 8 11 12 13 stun shot 90 tangent line "good-action" draw trisect direction medium

  15. Billiards Digest January, 2010 David Alciatore, PhD ("Dr. Dave") ILLUSTRATED PRINCIPLES

    E-Print Network [OSTI]

    Alciatore, David G.

    Billiards Digest January, 2010 David Alciatore, PhD ("Dr. Dave") ILLUSTRATED PRINCIPLES "VEPS GEMS" (i.e., "canned"). Now I feel like I have Billiards Digest "tenure." I can't believe it has been six and Position 1. cut shots 2. stun shots 3. follow shots #12;Billiards Digest January, 2010 4. draw shots 5. CB

  16. Billiards Digest April, 2011 David Alciatore, PhD ("Dr. Dave") ILLUSTRATED PRINCIPLES

    E-Print Network [OSTI]

    Alciatore, David G.

    Billiards Digest April, 2011 David Alciatore, PhD ("Dr. Dave") ILLUSTRATED PRINCIPLES "VEPS GEMS shots, Coriolis' system is a good place to start. #12;Billiards Digest April, 2011 a) side view b) top shot speed effects #12;Billiards Digest April, 2011 Diagram 3 (similar t

  17. 74 Scientific American, April 2011 Illustration by Tom Whalen Earthquake early-warning networks

    E-Print Network [OSTI]

    Allen, Richard M.

    earthquake early- warning system that could be extended to all of California. April 2011, Scientific. If an earth- quake early-warning system had existed back then, it could have provided perhaps a 20-second74 Scientific American, April 2011 Illustration by Tom Whalen SEISMOLOGY Earthquake early-warning

  18. Billiards Digest April, 2012 "VEPP Part I: Introduction and Fundamentals" ILLUSTRATED PRINCIPLES

    E-Print Network [OSTI]

    Alciatore, David G.

    game. All of the skills listed are important for a complete and well-rounded pool game. The drills consistent and well- positioned visual alignment. Diagram 1 illustrates a good drill to help you detect: "The Video Encyclopedia of Pool Practice (VEPP)." Like the "Video Encyclopedia of Pool Shots (VEPS

  19. ILLUSTRATING MATHEMATICS USING 3D PRINTERS OLIVER KNILL AND ELIZABETH SLAVKOVSKY

    E-Print Network [OSTI]

    Knill, Oliver

    printing technology can help to visualize proofs in mathematics. This talk aims to illustrate how 3D Greece, models allows to make mathematics more accessible. The new 3D printing technology makes unmatched. 3D printers allow us to do that with relative little effort. 2. 3D printing The industry of rapid

  20. Using plasma experiments to illustrate a complex index of refraction W. Gekelman and P. Pribyl

    E-Print Network [OSTI]

    California at Los Angles, University of

    Using plasma experiments to illustrate a complex index of refraction W. Gekelman and P. Pribyl's ionospheric plasma have frequencies low enough to be audible by the human ear. Whistlers were first noticed with respect to the magnetic field. Laboratory experiments that verify the wave propagation have been done

  1. A conceptual framework to understand retailers' logistics1 and transport organization illustrated for groceries' goods2

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    A conceptual framework to understand retailers' logistics1 and transport organization illustrated38 * Corresponding author9 10 11 1 IFSTTAR,12 Production Systems, logistics, Transport Organisation as retailers, through in-house or51 outsourced logistics deliveries to points of sale, have a high share

  2. Affine maps of density matrices

    E-Print Network [OSTI]

    Thomas F. Jordan

    2004-11-21T23:59:59.000Z

    For quantum systems described by finite matrices, linear and affine maps of matrices are shown to provide equivalent descriptions of evolution of density matrices for a subsystem caused by unitary Hamiltonian evolution in a larger system; an affine map can be replaced by a linear map, and a linear map can be replaced by an affine map. There may be significant advantage in using an affine map. The linear map is generally not completely positive, but the linear part of an equivalent affine map can be chosen to be completely positive and related in the simplest possible way to the unitary Hamiltonian evolution in the larger system.

  3. Dating the Vinland Map

    ScienceCinema (OSTI)

    None

    2013-07-17T23:59:59.000Z

    Scientists from Brookhaven National Laboratory, the University of Arizona, and the Smithsonian Institution used carbon-dating technology to determine the age of a controversial parchment that might be the first-ever map of North America.

  4. Agent-based mapping of credit risk for sustainable microfinance

    E-Print Network [OSTI]

    Lee, Joung-Hun; Podobnik, Boris; Iwasa, Yoh

    2015-01-01T23:59:59.000Z

    Inspired by recent ideas on how the analysis of complex financial risks can benefit from analogies with independent research areas, we propose an unorthodox framework for mapping microfinance credit risk---a major obstacle to the sustainability of lenders outreaching to the poor. Specifically, using the elements of network theory, we constructed an agent-based model that obeys the stylised rules of microfinance industry. We found that in a deteriorating economic environment confounded with adverse selection, a form of latent moral hazard may cause a regime shift from a high to a low loan repayment probability. An after-the-fact recovery, when possible, required the economic environment to improve beyond that which led to the shift in the first place. These findings suggest a small set of measurable quantities for mapping microfinance credit risk and, consequently, for balancing the requirements to reasonably price loans and to operate on a fully self-financed basis. We illustrate how the proposed mapping work...

  5. Characterization of contaminant phases in foraminifera carbonates by electron microprobe mapping

    E-Print Network [OSTI]

    Characterization of contaminant phases in foraminifera carbonates by electron microprobe mapping L characterized by the presence of manganese-rich minerals in the sediments. The combined application the foraminiferal shells. Results illustrate the presence of at least two different Mn-rich contaminant phases

  6. What We Do Spatial Video Geospatial video, also known as mobile mapping or

    E-Print Network [OSTI]

    Sheridan, Scott

    What We Do Spatial Video Geospatial video, also known as mobile mapping or spatial video, is an emerging technology that combines Global Positioning Systems (GPS) with video. This approach enables illustrates the part of Colorado Springs, Colorado in which spatially-encoded video data were collected

  7. Maps and inverse maps in open quantum dynamics

    E-Print Network [OSTI]

    Thomas F. Jordan

    2008-07-08T23:59:59.000Z

    Two kinds of maps that describe evolution of states of a subsystem coming from dynamics described by a unitary operator for a larger system, maps defined for fixed mean values and maps defined for fixed correlations, are found to be quite different for the same unitary dynamics in the same situation in the larger system. An affine form is used for both kinds of maps to find necessary and sufficient conditions for inverse maps. All the different maps with the same homogeneous part in their affine forms have inverses if and only if the homogeneous part does. Some of these maps are completely positive; others are not, but the homogeneous part is always completely positive. The conditions for an inverse are the same for maps that are not completely positive as for maps that are. For maps defined for fixed mean values, the homogeneous part depends only on the unitary operator for the dynamics of the larger system, not on any state or mean values or correlations. Necessary and sufficient conditions for an inverse are stated several different ways: in terms of the maps of matrices, basis matrices, density matrices, or mean values. The inverse maps are generally not tied to the dynamics the way the maps forward are. A trace-preserving completely positive map that is unital can not have an inverse that is obtained from any dynamics described by any unitary operator for any states of a larger system.

  8. Site Map - Pantex Plant

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > TheNuclearHomelandMultivariateSite Map Main Menu About the ALSSite Map

  9. Mapping the Nanoscale Landscape

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn12electronEnergy ManufacturingMapping the NanoscaleMapping

  10. Mapping the Nanoscale Landscape

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn12electronEnergy ManufacturingMapping theMapping the

  11. Mapping the Nanoscale Landscape

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn12electronEnergy ManufacturingMapping theMapping

  12. Mapping the Nanoscale Landscape

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated Codes |IsLove Your Home and It'llMapping Particle Charges inMapping

  13. Speed Map for Autonomous Rovers over Rough Terrain

    E-Print Network [OSTI]

    Loh, Jonathan Edau

    2012-01-01T23:59:59.000Z

    Grid Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . .considered obstacles [27] Grid Map showing Tile Size, Cellspeed map. It also covers grid maps and terrain roughness,

  14. Historical Maps Online

    E-Print Network [OSTI]

    Rumsey, David Y.

    2005-01-31T23:59:59.000Z

    geospatial data to see change over time. The online map collection can be accessed over the Internet from search engines, library catalogs, GIS databases and many other entry points. Rumsey continues to add new content to the online collection and develops...

  15. Mapping the Competitiveness

    E-Print Network [OSTI]

    Levinson, David M.

    Alberta Oil & Gas Companies Source: InnovationAtlas #12;Mapping the Midwest's Future: Regional Innovation,000 11 GDP Growth Rate 2.0% 117 Life Expectancy 81 14 Urbanization 81% 47 Source: World Bank Top exports: Crude Oil & Bitumen $81.0B Motor Vehicles & Parts $68.1B Consumer Goods $52.1B Intermediate Metal

  16. MINERAL FACILITIES MAPPING PROJECT

    E-Print Network [OSTI]

    Gilbes, Fernando

    MINERAL FACILITIES MAPPING PROJECT Yadira Soto-Viruet Supervisor: David Menzie, Yolanda Fong-Sam Minerals Information Team (MIT) USGS Summer Internship 2009 U.S. Department of the Interior U.S. Geological Minerals Information Team (MIT): Annually reports on the minerals facilities of more than 180 countries

  17. Servant dictionary battery, map

    E-Print Network [OSTI]

    Rosenthal, Jeffrey S.

    Attic *** book teachest Servant dictionary scarf [11] Winery demijohn battery, map AuntLair X Cupboard1 wireless Potting gloves aunt[3] Storage dumbwaiter wrench OldFurn parcel, med whistle Over] EastAnnex battery[4] Cupboard2 [2] mask DeadEnd rucksack AlisonWriting [16] TinyBalcony [17] gold key

  18. battery, map parcel, med

    E-Print Network [OSTI]

    Rosenthal, Jeffrey S.

    Attic *** book teachest Servant dictionary scarf [11] Winery demijohn battery, map AuntLair X Cupboard1 wireless Potting gloves aunt[3] Storage dumbwaiter wrench OldFurn parcel, med whistle Over] EastAnnex battery[4] Cupboard2 [2] mask DeadEnd rucksack AlisonWriting [16] TinyBalcony [17] gold key

  19. Rapid mapping tool : an ArcMap extension /

    SciTech Connect (OSTI)

    Linger, S. P. (Steve P.); Rich, P. M. (Paul M.); Walther, D. (Douglas); Witkowski, M. S. (Marc S.); Jones, M. A. (Marcia A.); Khalsa, H. S. (Hari S.)

    2002-01-01T23:59:59.000Z

    Cartographic production laboratories produce large volumes of maps for diverse customers. Turnaround time and consistency are key concerns. The Rapid Mapping Tool is an ArcMap based tool that enables rapid creation of maps to meet customer needs. This tool was constructed using VB/VBA, ArcObjects, and ArcGIS templates. The core capability of ArcMap is extended for custom map production by storing specifications associated with a map or template in a companion XML document. These specifications include settings and preferences used to create custom maps. The tool was developed as a component of an enterprise GIS, which enables spatial data management and delivery using ArcSDE, ArcIMS, Oracle, and a web-based request tracking system.

  20. On the Power of Nonlinear Mappings in Switching Map Systems

    E-Print Network [OSTI]

    Sato, Yuzuru

    On the Power of Nonlinear Mappings in Switching Map Systems Yuzuru Sato 1 # , Makoto Taiji 2 operations would be allowed. It is also expected that the computational power of switching map systems stronger computational power than classical Turing machines. On the other hand, these dynamical systems

  1. A comparison of methods used in mapping of Pleistocene-bedrock unconformity: Conventional manual versus surface modeling

    SciTech Connect (OSTI)

    Weibel, C.P.; Abert, C.C.; Kempton, J.P. (Illinois State Geological Survey, Champaign, IL (United States))

    1993-03-01T23:59:59.000Z

    Surface modeling software packages allow geologists to model and map topographic and stratigraphic horizons. These map products, however, often differ from maps prepared without computerized mapping. The authors mapping of the Pleistocene-bedrock unconformity in east-central Illinois (1:100,000-scale), which includes the Mahomet paleovalley, illustrates this situation and demonstrates how both mapping methods, manual and computer, contribute to a better understanding of the paleovalley. A conventional hand-drawn map was constructed over a number of years by manually plotting and contouring bedrock elevations, primarily from water well logs, onto various county and local topographic bases. A computer-generated map of the same area was completed as part of a recent project to map the bedrock geology. It was prepared by carefully selecting data, which included geographic coordinates, unique well identification numbers, and bedrock elevations. Primary data sources were hydrocarbon exploration and storage wells. Digitizing the hand-drawn map allowed the two maps to be overlaid and compared. Several significant geomorphic features appeared on one map and not the other because of the use of different databases and inconsistent selection of data used for the hand-drawn map. The hand-drawn map appears more realistic, i.e., like a modern surface, because the mappers used their knowledge of geomorphic concepts in drawing the contours. Most of the data selection for the computer-generated map was completed prior to plotting of the map and therefore is less susceptible to bias interpretations. The computer-generated map, however, is less topographically realistic in areas where data are sparse because the extrapolation methods used to define the surface do not recognize geologic processes or bedrock lithology.

  2. Power Maps in Algebra and

    E-Print Network [OSTI]

    Thévenaz, Jacques

    Power Maps in Algebra and Topology Kathryn Hess Preface The case of commutative algebras The Hochschild complex of a twisting cochain Power maps on the Hochschild complex Topological relevance Power Compostela, 17 September 2008 #12;Power Maps in Algebra and Topology Kathryn Hess Preface The case

  3. DOCUMENT MAPS FOR COMPETENCE MANAGEMENT

    E-Print Network [OSTI]

    Honkela, Timo

    DOCUMENT MAPS FOR COMPETENCE MANAGEMENT Timo Honkela Helsinki University of Technology Neural area of the document maps, i.e., competence management. The document map approach has approved The WEBSOM is a method for analyzing and visualizing large document col- lections. In the WEBSOM method

  4. ..~ v.-~Iernoir to illustrate a Geological Map of 9!!.ch. By C. \\JV.GRANT, ESQ.,Capt. Bombay Engineers.

    E-Print Network [OSTI]

    Bilham, Roger

    of slate clay, limestone slate, and slaty sandstone. The third, or southern range, and composed entirel y

  5. Husimi Maps in Graphene

    E-Print Network [OSTI]

    Douglas J. Mason; Mario F. Borunda; Eric J. Heller

    2012-06-08T23:59:59.000Z

    We present a method for bridging the gap between the Dirac effective field theory and atomistic simulations in graphene based on the Husimi projection, allowing us to depict phenomena in graphene at arbitrary scales. This technique takes the atomistic wavefunction as an input, and produces semiclassical pictures of quasiparticles in the two Dirac valleys. We use the Husimi tech- nique to produce maps of the scattering behavior of boundaries, giving insight into the properties of wavefunctions at energies both close to and far from the Dirac point. Boundary conditions play a significant role to the rise of Fano resonances, which we examine using the Husimi map to deepen our understanding of bond currents near resonance.

  6. Mapping Biomass Distribution Potential

    E-Print Network [OSTI]

    Schaetzel, Michael

    2010-11-18T23:59:59.000Z

    Mapping Biomass Distribution Potential Michael Schaetzel Undergraduate ? Environmental Studies ? University of Kansas L O C A T S I O N BIOMASS ENERGY POTENTIAL o According to DOE, Biomass has the potential to provide 14% of... the nations power o Currently 1% of national power supply o Carbon neutral? combustion of biomass is part of the natural carbon cycle o Improved crop residue management has potential to benefit environment, producers, and economy Biomass Btu...

  7. Introduction of heat map to fidelity assessment of compressed CT images

    SciTech Connect (OSTI)

    Lee, Hyunna; Kim, Bohyoung; Seo, Jinwook; Park, Seongjin; Shin, Yeong-Gil [School of Computer Science and Engineering, Seoul National University, 599 Kwanak-ro, Kwanak-gu, Seoul 151-742 (Korea, Republic of); Kim, Kil Joong [Department of Radiation Applied Life Science, Seoul National University College of Medicine, 28 Yongon-dong, Chongno-gu, Seoul 110-744 (Korea, Republic of); Lee, Kyoung Ho [Department of Radiology, Seoul National University Bundang Hospital, Seoul National University College of Medicine, Institute of Radiation Medicine and Seoul National University Medical Research Center, 300 Gumi-dong, Bundang-gu, Seongnam-si, Gyeonggi-do 463-707 (Korea, Republic of)

    2011-08-15T23:59:59.000Z

    Purpose: This study aimed to introduce heat map, a graphical data presentation method widely used in gene expression experiments, to the presentation and interpretation of image fidelity assessment data of compressed computed tomography (CT) images. Methods: The authors used actual assessment data that consisted of five radiologists' responses to 720 computed tomography images compressed using both Joint Photographic Experts Group 2000 (JPEG2000) 2D and JPEG2000 3D compressions. They additionally created data of two artificial radiologists, which were generated by partly modifying the data from two human radiologists. Results: For each compression, the entire data set, including the variations among radiologists and among images, could be compacted into a small color-coded grid matrix of the heat map. A difference heat map depicted the advantage of 3D compression over 2D compression. Dendrograms showing hierarchical agglomerative clustering results were added to the heat maps to illustrate the similarities in the data patterns among radiologists and among images. The dendrograms were used to identify two artificial radiologists as outliers, whose data were created by partly modifying the responses of two human radiologists. Conclusions: The heat map can illustrate a quick visual extract of the overall data as well as the entirety of large complex data in a compact space while visualizing the variations among observers and among images. The heat map with the dendrograms can be used to identify outliers or to classify observers and images based on the degree of similarity in the response patterns.

  8. Results of the Independent Radiological Verification Survey of Remediation at Building 14, Former Linde Uranium Refinery, Tonawanda, New York (LI001V)

    SciTech Connect (OSTI)

    McKenzie, S.P.

    2000-08-21T23:59:59.000Z

    As part of the Formerly Utilized Sites Remedial Action Program, a team from Oak Ridge National Laboratory (ORNL) conducted a radiological verification survey of Building 14 at the former Linde Uranium Refinery, Tonawanda, New York. The purpose of the survey was to verify that remedial action completed by the project management contractor had reduced contamination levels to within authorized limits. Prior to remediation, fixed and removable beta-gamma emitting material was Prevalent throughout Building 14 and in some of the process piping. Decontamination consisted of removal of surface contamination from floors, floor-wall interfaces, walls, wall-ceiling interfaces, and overhead areas; decontamination or removal of process piping; excavation and removal of subsurface soil; and vacuuming of dust. This independent radiological assessment was performed to verify that the remedial action had reduced contamination levels to within authorized limits. Building 14 at the former Linde site in Tonawanda, New York, was thoroughly investigated inside for radionuclide residues. Surface residual activity levels were generally well below applicable guidelines for protection against radiation. Similarly, removable alpha and beta-gamma activity levels were below guidelines. Gamma exposure rates within the building were at typical background levels, and no elevated indoor radon concentrations were measured. However, numerous areas exceeding U.S. Department of Energy (DOE) applicable guidelines still remain inside and underneath the building. These areas were either (1) inaccessible or (2) removal was not cost-effective or (3) removal would affect the structural integrity of the building. These above-guideline areas have been listed, described, and characterized by the remediation subcontractor (Appendix A), and dose to an exposed worker during typical exposure scenarios has been calculated. Based on the remediation subcontractor's characterization data and dose assessment calculations, these areas pose insignificant risk to building inhabitants under current use scenarios. However, future renovations, repairs, or demolition of the building must require prior evaluation and consideration of the areas. Analysis of the project management contractor's post-remedial action data and results of this independent radiological verification survey by ORNL confirm that residual contamination inside the building is either below the limits prescribed by DOE applicable guidelines for protection against radiation or areas exceeding applicable guidelines have been characterized and a risk assessment completed. Building 14 can be released for unrestricted use under current use scenarios; however, arrangements must be made to inform current and future building owners of the locations of areas exceeding DOE guidelines and any associated restrictions concerning renovations, repairs, or demolition of the building.

  9. Results of the Independent Radiological Verification Survey of Remediation at Building 31, Former Linde Uranium Refinery, Tonawanda, New York (LI001V)

    SciTech Connect (OSTI)

    McKenzie, S.P.; Uziel, M.S.

    1998-11-01T23:59:59.000Z

    As part of the Formerly Utilized Sites Remedial Action Progmq a team from Oak Ridge National Laboratory (ORNL) conducted a radiological veriihtion survey of Building 31 at the former Linde Uranium Refinery, Tonawau& New York. The purpose of the survey was to ver@ that remedial action completed by the project management contractor had reduced contamination levels to within authorized limits. Prior to remediatioq tied radioactive material was prevalent throughout the building and in some of the ductwork Decontaminadon consisted of removing surfhce contamination from floors, baseboards, and overhead areas; removing some air ducts; and vacuuming dust. Building 31 at the former Linde site in TonawandA New Yorlq was thoroughly investigated inside and outside for radionuclide residues. The verification team discovered previously undetected contaminadon beneath the concrete pad on the first floor and underneath floor tiles on the second floor. All suspect floor tiles were removed and any contamination beneath them cleaned to below guideline levels. The verification team also discovered elevated radiation levels associated with overhead air lines that led to the eventual removal of the entire air lige and a complete investigation of the history of all process piping in the building. Final verification surveys showed that residual surface beta-gamma activity levels were slightly elevated in some places but below U.S. Department of Energy applicable guidelines for protection against radiation (Table 1). Similarly, removable radioactive contamination was also below applicable guidelines. Exposure rates within the building were at typical background levels, and no consistently elevated indoor radon concentrations were measured. However, radionuclide analysis of subsurface soil from beneath the concrete floor on the ground level showed concentrations of `*U and'% that exceeded applicable guidelines. At the time of this survey, there was no measured exposure pathway for this subslab contamination under current use scenarios, and there was low risk associated with this contaminadon if the conaete slab is not cracked or penetrated. However, any penetration of the concrete slab caused by renovations, repairs, demolitio% or a naturally-occurring craclq would require further investigation and evaluation. Analysis of the project management contractor's post-remedial action data and results of this independent radiological vaification survey by ORNL confirm that all radiological measurements inside the building, on the exterior walls, and on the roof are below the limits prescribed by applicable guidelines for protection against radiation.

  10. A Review of "Christopher Plantin and Engraved Book Illustrations in Sixteenth-Century Europe" by Karen Bowen and Dirk Imhof

    E-Print Network [OSTI]

    Silver, Larry

    2010-01-01T23:59:59.000Z

    and thorough, this is a distinguished and rewarding contribu- tion to the history of higher education. Karen Bowen and Dirk Imhof. Christopher Plantin and Engraved Book Illustrations in Sixteenth-Century Europe. Cambridge: Cambridge University Press, 2008...

  11. CSP 541: Internet Technologies W.R. Stevens, TCP/IP Illustrated, Volume 1, Addison-Wesley, ISBN 0201633469

    E-Print Network [OSTI]

    Heller, Barbara

    CSP 541: Internet Technologies Texts W.R. Stevens, TCP/IP Illustrated, Volume 1, Addison March 2006 (html, css checks) CSP 541: Internet Technologies - CS Dept, Illinois Institut... 1 of 1 #12;

  12. ORISE: Site Map

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > TheNuclear Astrophysics One of theDedicationOak CSEPPInterestedSite Map

  13. Maps | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreaking ofOil & Gas »ofMarketingSmartManufacturing InnovationofMappingAbout

  14. Site Map - Cyclotron Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > TheNuclearHomelandMultivariateSite Map Main Menu About the ALS

  15. Site map | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > TheNuclearHomelandMultivariateSite Map Main Menu About the

  16. Southwestern Power System Map

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > TheNuclearHomelandMultivariateSite MapCrime Witness Program Evaluate

  17. Historical Network Maps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh School football High SchoolBundles toHiring-TP59.01 C5;44 Network Maps

  18. Mapping the Nanoscale Landscape

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn12electronEnergy ManufacturingMapping the Nanoscale

  19. Mapping the Nanoscale Landscape

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn12electronEnergy ManufacturingMapping the

  20. Maps & Directions | ORNL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated Codes |IsLove Your Home and It'llMapping Particle Charges

  1. Temperature Maps and Data

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40Coal StocksProvedFeet)ThousandNumber andCrudeTemperature Maps and Data

  2. Temperature Maps and Data

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40Coal StocksProvedFeet)ThousandNumber andCrudeTemperature Maps and

  3. An environmental mapping methodology adapted to the needs of petroleum operators

    SciTech Connect (OSTI)

    Veyradier, L.; Coquelet, D.; Dutrieux, E.

    1996-12-31T23:59:59.000Z

    Environmental mapping programs were carried out in three countries of intensive petroleum activity, located in the Gulf of Guinea: Gabon, Nigeria and Congo. The aim was to produce maps of environmental sensitive variables (thematic maps), which are used by the petroleum operating companies for improving the management of the environment. The maps are particularly useful for oil spill response organization or environmental assistance in the development of infrastructures. Whilst carrying out these applications, a mapping methodology adapted to the petroleum industry was developed and tested. In the first section, this methodology is described and illustrated by the above mentioned applications. The specific locations are selected according to their ecological, socioeconomic or petroleum special interest. Remote sensing data are used as an initial source of information. Two types of thematic maps are produced the first one dedicated to the ecological components, and the second one to the infrastructures and the environmental sensitivity, assessed from the ecological and socio-economical components. These maps can be integrated into atlases with accompanying text, and in order to make them more operational, all the mapping data collected are integrated into a Geographical Information System (GIS). In the second section, we present the innovative aspects of these R&D works, which concern mainly the adaptation of remote sensing for the environmental expertise and the use of GIS for full data integration and easy updating.

  4. CMB Maps at 0.5 degree Resolution I: Full-Sky Simulations and Basic Results

    E-Print Network [OSTI]

    G. Hinshaw; C. L. Bennett; A. Kogut

    1994-08-12T23:59:59.000Z

    We have simulated full-sky maps of the Cosmic Microwave Background (CMB) anisotropy expected from Cold Dark Matter (CDM) models at 0.5 and 1.0 degree angular resolution. Statistical properties of the maps are presented as a function of sky coverage, angular resolution, and instrument noise, and the implications of these results for observability of the Doppler peak are discussed. The rms fluctuations in a map are not a particularly robust probe of the existence of a Doppler peak, however, a full correlation analysis can provide reasonable sensitivity. We find that sensitivity to the Doppler peak depends primarily on the fraction of sky covered, and only secondarily on the angular resolution and noise level. Color plates and one-dimensional scans of the maps are presented to visually illustrate the anisotropies.

  5. Defect mapping system

    DOE Patents [OSTI]

    Sopori, B.L.

    1995-04-11T23:59:59.000Z

    Apparatus for detecting and mapping defects in the surfaces of polycrystalline materials in a manner that distinguishes dislocation pits from grain boundaries includes a laser for illuminating a wide spot on the surface of the material, a light integrating sphere with apertures for capturing light scattered by etched dislocation pits in an intermediate range away from specular reflection while allowing light scattered by etched grain boundaries in a near range from specular reflection to pass through, and optical detection devices for detecting and measuring intensities of the respective intermediate scattered light and near specular scattered light. A center blocking aperture or filter can be used to screen out specular reflected light, which would be reflected by nondefect portions of the polycrystalline material surface. An X-Y translation stage for mounting the polycrystalline material and signal processing and computer equipment accommodate rastor mapping, recording, and displaying of respective dislocation and grain boundary defect densities. A special etch procedure is included, which prepares the polycrystalline material surface to produce distinguishable intermediate and near specular light scattering in patterns that have statistical relevance to the dislocation and grain boundary defect densities. 20 figures.

  6. Recycle of oily refinery wastes

    SciTech Connect (OSTI)

    Bartilucci, M.P.; Karsner, G.G.; Tracy, W.J. III.

    1989-10-17T23:59:59.000Z

    This patent describes a process for recycling of petroleum containing sludge. It comprises segregating waste oil-containing sludges into a relatively high oil content sludge and a relatively high water content sludge; introducing the high oil content sludge into a delayed coking drum under delayed conditions in the presence of a liquid coker hydrocarbon feedstock to form coke; introducing the high water content sludge into a delayed coking drum to quench the coke formed in the coking drum.

  7. Recycle of oily refinery wastes

    SciTech Connect (OSTI)

    Bartilucci, M.P.; Karsner, G.G.; Tracy, W.J.

    1991-04-23T23:59:59.000Z

    This patent describes a process for disposing of petroleum containing sludge. It comprises segregating waste oil-containing sludges into a first sludge and a second sludge, the first sludge being of high oil content relative to the second sludge and the second sludge being of high water content relative to the first sludge; dewatering the first, high oil content sludge; introducing the dewatered sludge into a delayed coking drum under delayed coking conditions in the presence of a liquid coker hydrocarbon feedstock to form coke; introducing the second, high water content sludge into a delayed coking drum to quench the coke formed in the coking drum.

  8. A Louisiana Refinery Success Story

    E-Print Network [OSTI]

    Kacsur, D.

    recommended replacing the inverted bucket steam traps with 1-1/2-in. strainers and 1-1/2-in. flanged float & thermostatic steam traps. They also suggested that the existing trap discharge piping should be removed and re-piped with globe-style bypass valves...

  9. Refinery Fuel Balancing with Cogeneration

    E-Print Network [OSTI]

    Passman, K. W.; Taylor, R. I.; Williams, D. E.; Emanuel, D.

    1990-01-01T23:59:59.000Z

    of independent operation of boilers and turbines dictated that a dump stack be provided. CONTROL SYSTEM The turbines are controlled locally. Remote monitoring and shutdown are provided in the Refine& Control Center. The existing system of remote boiler... control was left in place. The turbines will normally operate in a base load mode. At normal steaming rates, sUPPlementa~ firing will maintain steam header pressure utilizing the oxygen in the turbine exhaust. During peak stea GENERAL ARRANGEMENT...

  10. Integrated Forest Products Refinery (IFPR)

    SciTech Connect (OSTI)

    van Heiningen, Adriaan R. P.

    2010-05-29T23:59:59.000Z

    Pre-extractionkraft studies of hardwoods showed that when extracting about 10% of the wood, the final kraft pulp yield and physical properties could only be maintained at a level similar to that of regular kraft pulp when the final extract pH was close to neutral. This so-called near neutral pre-extraction condition at a level of 10% wood dissolution was achieved by contacting the wood chips with green liquor (GL) at a charge of about 3% (as Na2O on wood) at 160 C for almost 2 hours (or an H-factor of about 800 hrs.). During subsequent kraft cooking of the pre-extracted hardwood chips the effective alkali charge could be reduced by about 3% (as Na2O on wood) and the cooking time shortened relative to that during regular kraft cooking, while still producing the same bleachable grade kappa number as the kraft control pulp. For softwood, no extraction conditions were discovered in the present investigation whereby both the final kraft pulp yield and physical properties could be maintained at a level similar to that of regular softwood kraft pulp. Therefore for hardwoods the near- neutral green liquor pre-extraction conditions do meet the requirements of the IFPR concept, while for softwood, no extraction conditions were discovered which do meet these requirements. Application of simulated industrial GL at an extraction H-factor of about 800 hrs and 3% GL charge in a recirculating digester produced an hardwood extract containing about 4% (on wood) of total anhydro-sugars, 2% of acetic acid, and 1.3% of lignin. Xylan comprised of 80% of the sugars of which about 85% is oligomeric. Since only polymeric hemicelluloses and lignin may be adsorbed on pulp (produced at a yield of about 50% from the original wood), the maximum theoretical yield increase due to adsorption may be estimated as 10% on pulp (or 5% on wood). However, direct application of raw GL hardwood extract for hemicelluloses adsorption onto hardwood kraft pulp led to a yield increase of only about 1% (on pulp). By using the wet-end retention aid guar gum during the adsorption process at a charge of 0.5% on pulp the yield gain may be increased to about 5%. Unfortunately, most of this yield increase is lost during subsequent alkaline treatments in the pulp bleach plant. It was found that by performing the adsorption at alkaline conditions the adsorption loss during alkaline treatment in the bleach plant is mostly avoided. Thus a permanent adsorption yield of about 3 and 1.5% (on pulp) was obtained with addition of guar gum at a charge of 0.5 and 0.1% respectively during adsorption of GL hardwood extract on pre-extracted kraft pulp at optimal conditions of pH 11.5, 90 C for 60 minutes at 5% consistency. The beatability of the adsorbed kraft pulps was improved. Also, significant physical strength improvements were achieved. Further study is needed to determine whether the improvements in pulp yield and paper properties make this an economic IFPR concept. Application of the wood solids of a hot water extract of Acer rubrum wood strands as a substitute for polystyrene used for production of SMC maintained the water adsorption properties of the final product. Further work on the physical properties of the hemicellulose containing SMCs need to be completed to determine the potential of wood extracts for the production of partially renewable SMCs. The discovery of the near-neutral green liquor extraction process for hardwood was formed the basis for a commercial Integrated Biorefinery that will extract hemicelluloses from wood chips to make biofuels and other specialty chemicals. The pulp production process will be maintained as is proposed in the present researched IFBR concept. This Integrated Biorefinery will be constructed by Red Shield Acquisition LLC (RSA) at the Old Town kraft pulp mill in Maine. RSA in collaboration with the University of Maine will develop and commercialize the hemicellulose extraction process, the conversion of the hemicellulose sugars into butanol by fermentation, and the separation of specialty chemicals such as acetic acid fr

  11. Refinery Outages: First Half 2015

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site.1 Relative Standard Errors for TableCORPORATION /Product:First

  12. Total Number of Operable Refineries

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5 Tables July 1996 Energy Information Administration Office ofthroughYear JanYear Jan Feb Mar Apr May(MillionFeet)JulyEndData

  13. U.S. Refinery Stocks

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40Coal Stocks at Commercial and InstitutionalArea: U.S. East Coast (PADD 1)

  14. Refinery Outages: First Half 2015

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1Stocks Nov-14 Dec-14Table 4.April 25, 20137a.06 2.013

  15. U.S. Refinery Yield

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1Stocks Nov-14TotalThe Outlook269,023Year JanCrude OilNov-14

  16. Motiva Refinery | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO2:Introduction toManagement of the NationalPennsylvania |February 2013

  17. U.S. Refinery Yield

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are nowTotal" (Percent) Type: Sulfur Content API GravityDakota" "Fuel, quality",Area: U.S. East Coast (PADD 1) New120,814 136,9322009 2010 2011 2012 2013

  18. Reformulated Gasoline Foreign Refinery Rules

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for On-Highway4,1,50022,3,,,,6,1,9,1,50022,3,,,,6,1,Decade Energy I I' a evie _ =_ In7, 20116,650.0622Product:Refiners Switch

  19. On the harmonic map equation

    E-Print Network [OSTI]

    S. C. Tiwari

    2007-06-09T23:59:59.000Z

    A generalized harmonic map equation is presented based on the proposed action functional in the Weyl space (PLA, 135, 315, 1989).

  20. Map Matching and Real World Integrated Sensor Data Warehousing (Presentation)

    SciTech Connect (OSTI)

    Burton, E.

    2014-02-01T23:59:59.000Z

    The inclusion of interlinked temporal and spatial elements within integrated sensor data enables a tremendous degree of flexibility when analyzing multi-component datasets. The presentation illustrates how to warehouse, process, and analyze high-resolution integrated sensor datasets to support complex system analysis at the entity and system levels. The example cases presented utilizes in-vehicle sensor system data to assess vehicle performance, while integrating a map matching algorithm to link vehicle data to roads to demonstrate the enhanced analysis possible via interlinking data elements. Furthermore, in addition to the flexibility provided, the examples presented illustrate concepts of maintaining proprietary operational information (Fleet DNA) and privacy of study participants (Transportation Secure Data Center) while producing widely distributed data products. Should real-time operational data be logged at high resolution across multiple infrastructure types, map matched to their associated infrastructure, and distributed employing a similar approach; dependencies between urban environment infrastructures components could be better understood. This understanding is especially crucial for the cities of the future where transportation will rely more on grid infrastructure to support its energy demands.

  1. The Metro Map Problem Existing metro maps, produced by professional

    E-Print Network [OSTI]

    Hong,Seokhee

    optimization methods to find a minimal energy state 20 Force directed method for metro map visualization artists, are excellent examples of network visualization Can we produce good metro maps automatically Virtual Environments Case Study - Stock Market MS-Guidelines MS-Process MS-Taxonomy Software Engineering

  2. Geologic Map and Cross Sections of the McGinness Hills Geothermal Area - GIS Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Faulds, James E.

    Geologic map data in shapefile format that includes faults, unit contacts, unit polygons, attitudes of strata and faults, and surficial geothermal features. 5 cross?sections in Adobe Illustrator format. Comprehensive catalogue of drill?hole data in spreadsheet, shapefile, and Geosoft database formats. Includes XYZ locations of well heads, year drilled, type of well, operator, total depths, well path data (deviations), lithology logs, and temperature data. 3D model constructed with EarthVision using geologic map data, cross?sections, drill?hole data, and geophysics.

  3. Geologic Map and Cross Sections of the McGinness Hills Geothermal Area - GIS Data

    SciTech Connect (OSTI)

    Faulds, James E.

    2013-12-31T23:59:59.000Z

    Geologic map data in shapefile format that includes faults, unit contacts, unit polygons, attitudes of strata and faults, and surficial geothermal features. 5 cross?sections in Adobe Illustrator format. Comprehensive catalogue of drill?hole data in spreadsheet, shapefile, and Geosoft database formats. Includes XYZ locations of well heads, year drilled, type of well, operator, total depths, well path data (deviations), lithology logs, and temperature data. 3D model constructed with EarthVision using geologic map data, cross?sections, drill?hole data, and geophysics.

  4. Mapping Kitaev's quantum double lattice models to Levin and Wen's string-net models

    E-Print Network [OSTI]

    Oliver Buerschaper; Miguel Aguado

    2009-10-29T23:59:59.000Z

    We exhibit a mapping identifying Kitaev's quantum double lattice models explicitly as a subclass of Levin and Wen's string net models via a completion of the local Hilbert spaces with auxiliary degrees of freedom. This identification allows to carry over to these string net models the representation-theoretic classification of the excitations in quantum double models, as well as define them in arbitrary lattices, and provides an illustration of the abstract notion of Morita equivalence. The possibility of generalising the map to broader classes of string nets is considered.

  5. Analysis, Optimization, and Assessment of Radioisotope Thermophotovoltaic System Design for an Illustrative Space Mission

    SciTech Connect (OSTI)

    Schock, Alfred; Mukunda, Meera; Summers, G.

    1994-06-28T23:59:59.000Z

    A companion paper presented at this conference described the design of a Radioisotope Thermophotovoltaic (RTPV) Generator for an illustrative space mission (Pluto Fast Flyby). It presented a detailed design of an integrated system consisting of a radioisotope heat source, a thermophotovoltaic converter, and an optimized heat rejection system. The present paper describes the thermal, electrical, and structural analyses which led to that optimized design, and compares the computed RTPV performance to that of a Radioisotope Thermoelectric Generator (RTG) designed for the same mission. RTPV's are of course much less mature than RTGs, but our results indicate that - when fully developed - they could result in a 60% reduction of the heat source's mass, cost, and fuel loading, a 50% reduction of generator mass, a tripling of the power system's specific power, and a quadrupling of its efficiency. The paper concludes by briefly summarizing the RTPV's current technology status and assessing its potential applicability for the PFF mission. For other power systems (e.g. RTGs), demonstrating their flight readiness for a long mission is a very time-consuming process to determine the long-term effect of temperature-induced degradation mechanisms. But for the case of the described RTPV design, the paper lists a number of factors, primarily its cold (0 to 10 degrees C) converter temperature, that may greatly reduce the need for long-term tests to demonstrate generator lifetime. In any event, our analytical results suggest that the RTPV generator, when developed by DOE and/or NASA, would be quite valuable not only for the Pluto mission but also for other future missions requiring small, long-lived, low mass generators. Another copy is in the Energy Systems files.

  6. Analysis, optimization, and assessment of radioisotope thermophotovoltaic system design for an illustrative space mission

    SciTech Connect (OSTI)

    Schock, A.; Mukunda, M.; Or, C.; Summers, G. [Fairchild Space and Defense Corporation, Germantown, Maryland 20874 (United States)

    1995-01-05T23:59:59.000Z

    A companion paper presented at this conference described the design of a Radioisotope Thermophotovoltaic (RTPV) Generator for an illustrative space mission (Pluto Fast Flyby). It presented a detailed design of an integrated system consisting of a radioisotope heat source, a thermophotovoltaic converter, and an optimized heat rejection system. The present paper describes the thermal, electrical, and structural analyses which led to that optimized design, and compares the computed RTPV performance to that of a Radioisotope Thermoelectric Generator (RTG) designed for the same mission. RTPVs are of course much less mature than RTGs, but our results indicate that---when fully developed---they could result in a 60% reduction of the heat source`s mass, cost, and fuel loading, a 50% reduction of generator mass, a tripling of the power system`s specific power, and a quadrupling of its efficiency. The paper concludes by briefly summarizing the RTPV`s current technology status and assessing its potential applicability for the PFF mission. For other power systems (e.g., RTGs), demonstrating their flight readiness for a long mission is a very time-consuming process to determine the long-term effect of temperature-induced degradation mechanisms. But for the case of the described RTPV design, the paper lists a number of factors, primarily its cold (0 to 10 {degree}C) converter temperature, that may greatly reduce the need for long-term tests to demonstrate generator lifetime. In any event, our analytical results suggest that the RTPV generator, when developed by DOE and/or NASA, would be quite valuable not only for the Pluto mission but also for other future missions requiring small, long-lived, low-mass generators. {copyright} {ital 1995} {ital American} {ital Institute} {ital of} {ital Physics}.

  7. HCEI Road Map 2011 Edition

    E-Print Network [OSTI]

    HCEI Road Map 2011 Edition #12;2 www.hawaiicleanenergyinitiative.org The Hawaii Clean Energy of the recommendations laid out in this Road Map will be undertaken by one or many of the stakeholders already at work on the electrical grid, along with increasing end use efficiency will mean that demand patterns and corresponding

  8. ALGORITHMS FOR CONSTRUCTING COMPARATIVE MAPS

    E-Print Network [OSTI]

    Kleinberg, Jon

    (i.e. that the segments are homeologous). The construction of comparative maps between the genomes and phylogenetic relationships among species as well as fundamental principles of genome evolution. Comparative maps allow us to use structural and functional information about one genome to make predictions about

  9. A review of "Visions of Persia: Mapping the Travels of Adam Olearius." by Elio Christoph Brancaforte

    E-Print Network [OSTI]

    Jonathan Burton

    2005-01-01T23:59:59.000Z

    is recommended for collec- tions on the seventeenth century and biographies on Indians in academic libraries and personal libraries. Elio Christoph Brancaforte. Visions of Persia: Mapping the Travels of Adam Olearius. Cambridge, Mass: Harvard University Press..., 2003. xxiv + 238 pp. + 66 illustrations. $45.00 Cloth, $27.50 Paper. Review by JONATHAN BURTON, WEST VIRGINIA UNIVERSITY. In the introduction to his study of the works of the German traveler and cartographer Adam Olearius, Elio Brancaforte promises...

  10. The distribution of an illustrated timeline wall chart and teacher's guide of 20th century physics

    SciTech Connect (OSTI)

    Schwartz, Brian

    2000-12-26T23:59:59.000Z

    The American Physical Society's part of its centennial celebration in March of 1999 decided to develop a timeline wall chart on the history of 20th century physics. This resulted in eleven consecutive posters, which when mounted side by side, create a 23-foot mural. The timeline exhibits and describes the millstones of physics in images and words. The timeline functions as a chronology, a work of art, a permanent open textbook, and a gigantic photo album covering a hundred years in the life of the community of physicists and the existence of the American Physical Society. Each of the eleven posters begins with a brief essay that places a major scientific achievement of the decade in its historical context. Large portraits of the essays' subjects include youthful photographs of Marie Curie, Albert Einstein, and Richard Feynman among others, to help put a face on science. Below the essays, a total of over 130 individual discoveries and inventions, explained in dated text boxes with accompanying images, form the backbone of the timeline. For ease of comprehension, this wealth of material is organized into five color-coded story lines the stretch horizontally across the hundred years of the 20th century. The five story lines are: Cosmic Scale, relate the story of astrophysics and cosmology; Human Scale, refers to the physics of the more familiar distances from the global to the microscopic; Atomic Scale, focuses on the submicroscopic world of atoms, nuclei and quarks; Living World, chronicles the interaction of physics with biology and medicine; Technology, traces the applications of physic to everyday living. Woven into the bottom border of the timeline are period images of significant works of art, architecture, and technological artifacts such as telephones, automobiles, aircraft, computers, and appliances. The last poster, covering the years since 1995, differs from the others. Its essay concerns the prospect for physics into the next century, and is illustrated with pictures of promising award winning high school students who, it is hoped, will be the leading researchers of physics in the decades ahead. Appropriately the last entries in the timeline are not achievements but open questions to be answered in the future.

  11. Mappings of Conjugation of Quaternion Algebra

    E-Print Network [OSTI]

    Aleks Kleyn

    2012-06-10T23:59:59.000Z

    In the paper I considered mappings of conjugation of quaternion algebra. I proved the theorem that there is unique expansion of R-linear mapping of quaternion algebra relative to the given set of mappings of conjugation.

  12. Sense of Place Evoked by Interactive Maps

    E-Print Network [OSTI]

    Go, Hanyoung

    2012-07-16T23:59:59.000Z

    orientation, spatial imagery, and spatial presence. Responses from 211 students were analyzed using structural equation modeling (SEM). The study results showed that map interfaces influence human perceptions of map interactivity. Perceived map interactivity...

  13. MARSAME Illustrative Examples 8 ILLUSTRATIVE EXAMPLES

    E-Print Network [OSTI]

    an example of a disposition survey for a large quantity of bulk material at a mineral processing facility 8.4 are based on the same mineral processing facility that serves as the basis for Section 8 it is brought into a radiological control area (RCA) for the impacted bulk material. This baseline survey

  14. Mapping (USPTO) Patent Data using Overlays to Google Maps

    E-Print Network [OSTI]

    Leydesdorff, Loet

    2011-01-01T23:59:59.000Z

    The paper describes a technique to use patent information available online (at the US Patent and Trademark Office) for the generation of Google Maps that indicate both the quantity and quality of patents granted at the city level. The resulting maps are relevant for technological innovation policies and R&D management because the US market can be considered as the leading market for patenting and patent competition. Quantitative data is made available by the mapping routines for more detailed statistical analysis, and the non-parametric statistics for significance testing are specified. The new mapping approach is explored for the cases of the emerging technologies of "RNA interference" and "nanotechnology" as specific examples. Perspectives for further developments of this technique (other databases and network analysis of co-inventions) are specified.

  15. Mapping the March to Methodical Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mapping the March to Methodical Materials Mapping the March to Methodical Materials Computational Chemistry Provides Proof of Popular MOF's Reactivity September 18, 2014 | Tags:...

  16. MAPPING HVAC SYSTEMS FOR SIMULATION IN ENERGYPLUS

    E-Print Network [OSTI]

    Basarkar, Mangesh

    2013-01-01T23:59:59.000Z

    LBNL-XXXXX MAPPING HVAC SYSTEMS FOR SIMULATION IN ENERGYPLUSof California. MAPPING HVAC SYSTEMS FOR SIMULATION INpresent a conventional view of HVAC systems to the user, and

  17. CS3600 Lab Manual CyberCIEGE is an information assurance (IA) training tool that illustrates computer and

    E-Print Network [OSTI]

    CS3600 Lab Manual Lab SSL CyberCIEGE is an information assurance (IA) training tool. The CyberCIEGE SSL scenario illustrates the use of SSL to authenticate the identity of web servers. This scenario explores the following concepts: SSL is a means of authenticating a server (e.g., a web server

  18. Abstract--In this paper, we present a numerical example to illustrate some situations under which generation companies in

    E-Print Network [OSTI]

    Oren, Shmuel S.

    generation companies in Locational Marginal Pricing (LMP) based markets could have the right incentives to illustrate some situations under which generation companies in Locational Marginal Pricing (LMP) based for the analysis presented in this article, we assume that the transmission system uses locational marginal pricing

  19. Salt-and-Pepper Noise The purpose of this challenge is to illustrate that spectral filtering methods may not

    E-Print Network [OSTI]

    Mosegaard, Klaus

    Salt-and-Pepper Noise The purpose of this challenge is to illustrate that spectral filtering methods may not always be successful when the noise in the image is highly non-Gaussian. We consider salt of the noise). Salt-and-pepper noise can, e.g., be used to model defects in the CCD or in the transmission

  20. Finite element calculations illustrating a method of model reduction for the dynamics of structures with localized nonlinearities.

    SciTech Connect (OSTI)

    Griffith, Daniel Todd; Segalman, Daniel Joseph

    2006-10-01T23:59:59.000Z

    A technique published in SAND Report 2006-1789 ''Model Reduction of Systems with Localized Nonlinearities'' is illustrated in two problems of finite element structural dynamics. That technique, called here the Method of Locally Discontinuous Basis Vectors (LDBV), was devised to address the peculiar difficulties of model reduction of systems having spatially localized nonlinearities. It's illustration here is on two problems of different geometric and dynamic complexity, but each containing localized interface nonlinearities represented by constitutive models for bolted joint behavior. As illustrated on simple problems in the earlier SAND report, the LDBV Method not only affords reduction in size of the nonlinear systems of equations that must be solved, but it also facilitates the use of much larger time steps on problems of joint macro-slip than would be possible otherwise. These benefits are more dramatic for the larger problems illustrated here. The work of both the original SAND report and this one were funded by the LDRD program at Sandia National Laboratories.

  1. Lavender Foal Syndrome Hair Sample Sheet Please tape hair samples within boxed area as illustrated and place in individual envelope.

    E-Print Network [OSTI]

    Keinan, Alon

    Lavender Foal Syndrome Hair Sample Sheet Please tape hair samples within boxed area as illustrated and place in individual envelope. *Pull 50 hairs from the tail or mane (do not use hairs shed on brush) #Hairs must be pulled, not cut #Hairs must contain hair root *Align the "roots" of the hairs and trim

  2. Protein folding using contact maps

    E-Print Network [OSTI]

    Michele Vendruscolo; Eytan Domany

    1999-01-21T23:59:59.000Z

    We present the development of the idea to use dynamics in the space of contact maps as a computational approach to the protein folding problem. We first introduce two important technical ingredients, the reconstruction of a three dimensional conformation from a contact map and the Monte Carlo dynamics in contact map space. We then discuss two approximations to the free energy of the contact maps and a method to derive energy parameters based on perceptron learning. Finally we present results, first for predictions based on threading and then for energy minimization of crambin and of a set of 6 immunoglobulins. The main result is that we proved that the two simple approximations we studied for the free energy are not suitable for protein folding. Perspectives are discussed in the last section.

  3. MAPPING CLIMATE CHANGE EXPOSURES, VULNERABILITIES,

    E-Print Network [OSTI]

    MAPPING CLIMATE CHANGE EXPOSURES, VULNERABILITIES, AND ADAPTATION TO PUBLIC HEALTH RISKS's California Climate Change Center JULY 2012 CEC5002012041 Prepared for: California Energy Commission of California. #12; ii ABSTRACT This study reviewed first available frameworks for climate change adaptation

  4. Lyapunov exponent and natural invariant density determination of chaotic maps: An iterative maximum entropy ansatz

    E-Print Network [OSTI]

    Parthapratim Biswas; H. Shimoyama; L. R. Mead

    2009-10-23T23:59:59.000Z

    We apply the maximum entropy principle to construct the natural invariant density and Lyapunov exponent of one-dimensional chaotic maps. Using a novel function reconstruction technique that is based on the solution of Hausdorff moment problem via maximizing Shannon entropy, we estimate the invariant density and the Lyapunov exponent of nonlinear maps in one-dimension from a knowledge of finite number of moments. The accuracy and the stability of the algorithm are illustrated by comparing our results to a number of nonlinear maps for which the exact analytical results are available. Furthermore, we also consider a very complex example for which no exact analytical result for invariant density is available. A comparison of our results to those available in the literature is also discussed.

  5. Local control of area-preserving maps

    E-Print Network [OSTI]

    Cristel Chandre; Michel Vittot; Guido Ciraolo

    2008-09-01T23:59:59.000Z

    We present a method of control of chaos in area-preserving maps. This method gives an explicit expression of a control term which is added to a given area-preserving map. The resulting controlled map which is a small and suitable modification of the original map, is again area-preserving and has an invariant curve whose equation is explicitly known.

  6. Autodesk MapGuide Working with Resources

    E-Print Network [OSTI]

    Ahmad, Sajjad

    Autodesk MapGuide Enterprise Working with Resources Autodesk MapGuide Enterprise software has a powerful API (application programming interface) for manipulating resources such as feature and drawing sources, maps, layers, and layouts. Using the Resource Service API, MapGuide-based applications can

  7. Nonlinear Data Transformation with Diffusion Map

    E-Print Network [OSTI]

    ) Others: Laplacian eigenmaps, Hessian eigenmaps, LTSA We apply the diffusion map (Coifman & Lafon 2006

  8. Hierarchical Infrastructure for Internet Mapping Services

    E-Print Network [OSTI]

    Samet, Hanan

    locally. We investigate this opportunity for further improvement in providing the client with map data access to remote spatial databases adopted by numerous web-based mapping service vendors (e.g., MapChapter 1 Hierarchical Infrastructure for Internet Mapping Services Frantisek Brabec and Hanan

  9. BrainMap `95 workshop

    SciTech Connect (OSTI)

    NONE

    1995-12-31T23:59:59.000Z

    The fourth annual BrainMap workshop was held at La Mansion del Rio Hotel in San Antonio December 3--4, 1995. The conference title was ``Human Brain Mapping and Modeling.`` The meeting was attended by 137 registered participants and 30 observers from 82 institutions representing 12 countries. The meeting focused on the technical issues associated with brain mapping and modeling. A total of 23 papers were presented covering the following topics: spatial normalization and registration; functional image analysis; metanalysis and modeling; and new horizons in biological databases. The full program with abstracts was available on the Research Imaging Center`s web site. A book will be published by John Wiley and Sons prior to the end of 1998.

  10. How do I display the Map of Wind Farms csv coordinates in ArcMap...

    Open Energy Info (EERE)

    display the Map of Wind Farms csv coordinates in ArcMap software? Home > Groups > Geospatial I downloaded the Map of Wind Farms data as a .csv from http:en.openei.orgwiki...

  11. How do I display the Map of Wind Farms csv coordinates in ArcMap...

    Open Energy Info (EERE)

    do I display the Map of Wind Farms csv coordinates in ArcMap software? Home > Groups > Geospatial I downloaded the Map of Wind Farms data as a .csv from http:en.openei.orgwiki...

  12. Appearance-Based Navigation, Localization, Mapping, and Map Merging for Heterogeneous Teams of Robots

    E-Print Network [OSTI]

    Erinc, Gorkem

    2013-01-01T23:59:59.000Z

    merging of an occupancy grid map and an appearance- basedmerging of an occupancy grid map and an appearance- basedW. Burgard. Improved techniques for grid map- ping with rao-

  13. A physical map of the papaya genome with integrated genetic map and genome sequence

    E-Print Network [OSTI]

    2009-01-01T23:59:59.000Z

    genetic map and genome sequence Qingyi Yu 1 , Eric Tong 1 ,assist whole genome shotgun sequence assembly. Results: Thethe genetic map and genome sequence using BAC end sequences

  14. February 2011 Mapping the power

    E-Print Network [OSTI]

    Farrell, Anthony P.

    February 2011 5 Mapping the power of sunshine 8 Aboriginal portal emphasizes video 10 The value or less) must be signed and include an address and phone number for verification. Submit letters to campus By Jody Jacob these compounds could potentially be controlled. "Using lavender as our test model

  15. Digital Soil Mapping: Interactions with

    E-Print Network [OSTI]

    Grunwald, Sabine

    Chapter 21 Digital Soil Mapping: Interactions with and Applications for Hydropedology J.A. Thompson,1, * S. Roecker,2 S. Grunwald3 and P.R. Owens4 ABSTRACT Spatial information on soils, particularly hydrologic and hydromorphic soil properties, is used to understand and assess soil water retention, flooding

  16. GIS Mapping Technician Prince George

    E-Print Network [OSTI]

    Northern British Columbia, University of

    initiatives through data input, manipulation, and quality control as well as map production. A skilled for setting stumpage rates at levels consistent with forest product markets. BCTS has divided the province apportionment by planning, developing, auctioning and then reforesting those areas from which auctioned timber

  17. The use of broadband microseisms for hydraulic fracture mapping

    SciTech Connect (OSTI)

    Sleefe, G.E.; Warpinski, N.R.; Engler, B.P.

    1993-08-01T23:59:59.000Z

    When a hydrocarbon reservoir is subjected to a hydraulic fracture treatment, the cracking and slipping of the formation results in the emission of seismic energy. The objective of this study was to determine the advantages of using broadband (100 Hz to 1500 M) microseismic emissions to map a hydraulic fracture treatment. A hydraulic fracture experiment was performed in the Piceance Basin of Western Colorado to induce and record broadband microseismic events. The formation was subjected to four processes; break-down/ballout, step-rate test, KCL mini-fracture, and linear-gel mini-fracture. Broadband microseisms were successfully recorded by a novel three-component wall-locked seismic accelerometer package, placed in an observation well 211 ft (64 m) offset from the treatment well. During the two hours of formation treatment, more than 1200 significant microseismic events were observed. The occurrences of the events strongly correlated with the injection bore-bole pressures during the treatments. Using both hodogram analysis and time of arrival information, estimates of the origination point of the seismic events were computed. A map of the event locations yielded a fracture orientation estimate consistent with the known orientation of the field in the formation. This paper describes the technique for acquiring and analyzing broadband microseismic events and illustrate how the new broadband approach can enhance signal detectability and event location resolution.

  18. Optimization search effort over the control landscapes for open quantum systems with Kraus-map evolution

    E-Print Network [OSTI]

    Anand Oza; Alexander Pechen; Jason Dominy Vincent Beltrani; Katharine Moore; Herschel Rabitz

    2009-05-07T23:59:59.000Z

    A quantum control landscape is defined as the expectation value of a target observable $\\Theta$ as a function of the control variables. In this work control landscapes for open quantum systems governed by Kraus map evolution are analyzed. Kraus maps are used as the controls transforming an initial density matrix $\\rho_{\\rm i}$ into a final density matrix to maximize the expectation value of the observable $\\Theta$. The absence of suboptimal local maxima for the relevant control landscapes is numerically illustrated. The dependence of the optimization search effort is analyzed in terms of the dimension of the system $N$, the initial state $\\rho_{\\rm i}$, and the target observable $\\Theta$. It is found that if the number of nonzero eigenvalues in $\\rho_{\\rm i}$ remains constant, the search effort does not exhibit any significant dependence on $N$. If $\\rho_{\\rm i}$ has no zero eigenvalues, then the computational complexity and the required search effort rise with $N$. The dimension of the top manifold (i.e., the set of Kraus operators that maximizes the objective) is found to positively correlate with the optimization search efficiency. Under the assumption of full controllability, incoherent control modelled by Kraus maps is found to be more efficient in reaching the same value of the objective than coherent control modelled by unitary maps. Numerical simulations are also performed for control landscapes with linear constraints on the available Kraus maps, and suboptimal maxima are not revealed for these landscapes.

  19. The Geology of North America as Illustrated by Native American Stories by Robert G. McWilliams 1 The Geology of North America as

    E-Print Network [OSTI]

    Lee Jr., Richard E.

    The Geology of North America as Illustrated by Native American Stories by Robert G. McWilliams 1 The Geology of North America as Illustrated by Native American Stories Robert G. McWilliams Professor Emeritus Department of Geology Miami University Oxford, Ohio 45056 mcwillrg@muohio.edu #12;The Geology of North

  20. The Seismic Analyzer: Interpreting and Illustrating 2D Seismic Data Daniel Patel, Christopher Giertsen, John Thurmond, John Gjelberg, and M. Eduard Groller, Member, IEEE

    E-Print Network [OSTI]

    The Seismic Analyzer: Interpreting and Illustrating 2D Seismic Data Daniel Patel, Christopher for quickly interpreting and illustrating 2D slices of seismic volumetric reflection data. Searching for oil of the seismic data prior to interpretation. We improve the annotation of seismic structures by applying novel

  1. Building Science-Based Climate Maps - Building America Top Innovation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Science-Based Climate Maps - Building America Top Innovation Building Science-Based Climate Maps - Building America Top Innovation Photo showing climate zone maps based on the IECC...

  2. Gravity Survey of the Carson Sink - Data and Maps - Datasets...

    Open Energy Info (EERE)

    Relationship Dataset Dataset extent Map data OpenStreetMap contributors Tiles by MapQuest License Creative Commons Attribution 4.0 Open Data Author University of...

  3. SNL-CRCV Map-580 to CRCV

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to be badged Sandia National Laboratories 7011 East Avenue Livermore, CA 94551 Parking Tesla Road CRF Parking 904 906 From OaklandSan Francisco Map Not to Scale Map Not to Scale...

  4. A genetic linkage map of buffelgrass

    E-Print Network [OSTI]

    Jessup, Russell William

    1999-01-01T23:59:59.000Z

    Details of apomixis at levels of the gene, chromosome, and genome can be obtained with a comprehensive restriction fragment length polymorphism (RFLP) linkage map. The objective of this research was construction of a genetic linkage map...

  5. Optimizing MapReduce for Multicore Architectures

    E-Print Network [OSTI]

    Kaashoek, Frans

    2010-05-02T23:59:59.000Z

    MapReduce is a programming model for data-parallel programs originally intended for data centers. MapReduce simplifies parallel programming, hiding synchronization and task management. These properties make it a promising ...

  6. Geographic Resource Map of Frozen Pipe Probabilities

    Broader source: Energy.gov [DOE]

    Presentation slide details a resource map showing the probability of frozen pipes in the geographic United States.

  7. UNCORRECTEDPROOF 2 Positioning using local maps q

    E-Print Network [OSTI]

    Ruml, Wheeler

    Positioning using Local 11 Maps (PLM). Given a path between a starting node and a remote node we wish absolute coordinates. We instantiate the PLM framework using the previously pro- 15 posed MDS Local 57 Maps (PLM). The method estimates node loca- 58 tions based on local maps, i.e., positions

  8. Mining Protein Contact Maps Jingjing Hu

    E-Print Network [OSTI]

    Bystroff, Chris

    Mining Protein Contact Maps Jingjing Hu , Xiaolan Shen , Yu Shao , Chris Bystroff matrix of pairwise, inter-residue contacts, or "contact map". The contact map provides a host of use- ful information about the protein's structure. In this paper we de- scribe how data mining can be used to extract

  9. An illustrated primer

    E-Print Network [OSTI]

    Pugh, Kendra Leigh

    2012-01-01T23:59:59.000Z

    Educational technology has received unprecedented attention recently, as the efficacy of traditional education methods are coming into question. This thesis introduces the Primer - an e-textbook that initially customizes ...

  10. Requisition Illustrated User

    E-Print Network [OSTI]

    . Search by: Title or Product Code - enter key terms and select the proper radio button. Supplier a Requisition. At the BidSync homepage www.bidsync.com, you will need to enter your unique username and password box on the home tab and you will be taken to the same location). 2. Enter the following information

  11. Instability of non-constant harmonic maps for the 1 + 2-dimensional equivariant wave map system

    E-Print Network [OSTI]

    Cte, Raphal

    energy har- monic map Q (a stationary solution), and show that when it exists, Q is instable in the energy space. Our result applies in particular to the case of wave maps to the sphere S2Instability of non-constant harmonic maps for the 1 + 2-dimensional equivariant wave map system

  12. The University of Toronto Map and Data Library: An Introduction to Maps and Geospatial Data

    E-Print Network [OSTI]

    Sun, Yu

    .maps@utoronto.ca Phone: 416-978-5589 Web: http://mdl.library.utoronto.ca Hours Regular Robarts open hours or http, and Printing Maps One 36" wide map scanner, photocopier, printer, one 8.5" X 11" regular photocopier human visual tool. In other words, maps are part of a core group of basic tools for human communication

  13. Eastern Energy Zones Mapping Tool

    Broader source: Energy.gov [DOE]

    The Eastern Interconnection States Planning Council (EISPC) has released the Energy Zones (EZ) Mapping Tool, a free, web-based interactive tool that will help states and other stakeholders in the Eastern Interconnection identify geographic areas suitable for the development of clean energy resources (natural gas, sequestration or utilitization locations for C02 from coal, nuclear, and renewable) which can potentially provide significant amounts of new electric power generation.

  14. Noise-amplitude dependence of the invariant density for noisy, fully chaotic one-dimensional maps

    E-Print Network [OSTI]

    S. Seshadri; V. Balakrishnan; S. Lakshmibala

    1999-05-31T23:59:59.000Z

    We present some analytic, non-perturbative results for the invariant density rho(x) for noisy one-dimensional maps at fully developed chaos. Under periodic boundary conditions, the Fourier expansion method is used to show precisely how noise makes rho(x) absolutely continuous and smoothens it out. Simple solvable models are used to illustrate the explicit dependence of rho(x) on the amplitude eta of the noise distribution, all the way from the case of zero noise (eta > 0) to the completely noise-dominated limit (eta=1).

  15. Nanoscale magnetic field mapping with a single spin scanning probe magnetometer

    SciTech Connect (OSTI)

    Rondin, L.; Tetienne, J.-P.; Spinicelli, P.; Roch, J.-F.; Jacques, V. [Laboratoire de Photonique Quantique et Moleculaire, Ecole Normale Superieure de Cachan and CNRS UMR 8537, 94235 Cachan Cedex (France); Dal Savio, C.; Karrai, K. [Attocube systems AG, Koeniginstrasse 11A RGB, Munich 80539 (Germany); Dantelle, G. [Laboratoire de Physique de la Matiere Condensee, Ecole Polytechnique and CNRS UMR 7643, 91128 Palaiseau (France); Thiaville, A.; Rohart, S. [Laboratoire de Physique des Solides, Universite Paris-Sud and CNRS UMR 8502, 91405 Orsay (France)

    2012-04-09T23:59:59.000Z

    We demonstrate quantitative magnetic field mapping with nanoscale resolution, by applying a lock-in technique on the electron spin resonance frequency of a single nitrogen-vacancy defect placed at the apex of an atomic force microscope tip. In addition, we report an all-optical magnetic imaging technique which is sensitive to large off-axis magnetic fields, thus extending the operation range of diamond-based magnetometry. Both techniques are illustrated by using a magnetic hard disk as a test sample. Owing to the non-perturbing and quantitative nature of the magnetic probe, this work should open up numerous perspectives in nanomagnetism and spintronics.

  16. HARMONIC MAPPINGS BETWEEN RIEMANNIAN MANIFOLDS Anand Arvind Joshi

    E-Print Network [OSTI]

    Leahy, Richard M.

    HARMONIC MAPPINGS BETWEEN RIEMANNIAN MANIFOLDS by Anand Arvind Joshi A Thesis Presented ii Abstract iv 1 Harmonic Mappings 1 1.1 Space of Maps Variation Formula . . . . . . . . . . . . . . . . . . . . . . . . 11 1.4 Harmonic Maps

  17. How to Use the Index & Grid Maps Each BioBlitz Zone has a map packet. The packets contain an index map and several grid (aerial) maps. In addition to identifying

    E-Print Network [OSTI]

    Columbia University

    How to Use the Index & Grid Maps Each BioBlitz Zone has a map packet. The packets contain an index map and several grid (aerial) maps. In addition to identifying species in the park, this year we would of the zone. This map shows which areas are covered by the grid maps. The black squares show the edge of each

  18. Figure 2. Left: Illustration of the relative change in the HRMA effective area caused by different hydrocarbon contamination layers. The range shown

    E-Print Network [OSTI]

    Wolfe, Patrick J.

    Figure 2. Left: Illustration of the relative change in the HRMA effective area caused by different- tainties for the Chandra High Resolution Mirror Assembly (HRMA) and Advanced CCD Imaging Spectrograph (ACIS

  19. Physical mapping of complex genomes

    DOE Patents [OSTI]

    Evans, G.A.

    1993-06-15T23:59:59.000Z

    A method for the simultaneous identification of overlapping cosmid clones among multiple cosmid clones and the use of the method for mapping complex genomes are provided. A library of cosmid clones that contains the DNA to be mapped is constructed and arranged in a manner such that individual clones can be identified and replicas of the arranged clones prepared. In preferred embodiments, the clones are arranged in a two dimensional matrix. In such embodiments, the cosmid clones in a row are pooled, mixed probes complementary to the ends of the DNA inserts in the pooled clones are synthesized, hybridized to a first replica of the library. Hybridizing clones, which include the pooled row, are identified. A second portion of clones is prepared by pooling cosmid clones that correspond to a column in the matrix. The second pool thereby includes one clone from the first portion pooled clones. This common clone is located on the replica at the intersection of the column and row. Mixed probes complementary to the ends of the DNA inserts in the second pooled portion of clones are prepared and hybridized to a second replica of the library. The hybridization pattern on the first and second replicas of the library are compared and cross-hybridizing clones, other than the clones in the pooled column and row, that hybridize to identical clones in the first and second replicas are identified. These clones necessarily include DNA inserts that overlap with the DNA insert in the common clone located at the intersection of the pooled row and pooled column. The DNA in the entire library may be mapped by pooling the clones in each of the rows and columns of the matrix, preparing mixed end-specific probes and hybridizing the probes from each row or column to a replica of the library. Since all clones in the library are located at the intersection of a column and a row, the overlapping clones for all clones in the library may be identified and a physical map constructed.

  20. Physical mapping of complex genomes

    DOE Patents [OSTI]

    Evans, Glen A. (Encinitas, CA)

    1993-01-01T23:59:59.000Z

    Method for simultaneous identification of overlapping cosmid clones among multiple cosmid clones and the use of the method for mapping complex genomes are provided. A library of cosmid clones that contains the DNA to be mapped is constructed and arranged in a manner such that individual clones can be identified and replicas of the arranged clones prepared. In preferred embodiments, the clones are arranged in a two dimensional matrix. In such embodiments, the cosmid clones in a row are pooled, mixed probes complementary to the ends of the DNA inserts int he pooled clones are synthesized, hybridized to a first replica of the library. Hybridizing clones, which include the pooled row, are identified. A second portion of clones is prepared by pooling cosmid clones that correspond to a column in the matrix. The second pool thereby includes one clone from the first portion pooled clones. This common clone is located on the replica at the intersection of the column and row. Mixed probes complementary to the ends of the DNA inserts in the second pooled portion of clones are prepared and hybridized to a second replica of the library. The hybridization pattern on the first and second replicas of the library are compared and cross-hybridizing clones, other than the clones in the pooled column and row, that hybridize to identical clones in the first and second replicas are identified. These clones necessarily include DNA inserts that overlap with the DNA insert int he common clone located at the intersection of the pooled row and pooled column. The DNA in the entire library may be mapped by pooling the clones in each of the rows and columns of the matrix, preparing mixed end-specific probes and hybridizing the probes from each row or column to a replica of the library. Since all clones in the library are located at the intersection of a column and a row, the overlapping clones for all clones in the library may be identified and a physical map constructed. In other preferred embodiments, the cosmid clones are arranged in a three dimensional matrix, pooled and compared in threes according to intersecting planes of the three dimensional matrix. Arrangements corresponding to geometries of higher dimensions may also be prepared and used to simultaneously identify overlapping clones in highly complex libraries with relatively few hybridization reactions.

  1. Constructing Buildings and Harmonic Maps

    E-Print Network [OSTI]

    Katzarkov, Ludmil; Pandit, Pranav; Simpson, Carlos

    2015-01-01T23:59:59.000Z

    In a continuation of our previous work, we outline a theory which should lead to the construction of a universal pre-building and versal building with a $\\phi$-harmonic map from a Riemann surface, in the case of two-dimensional buildings for the group $SL_3$. This will provide a generalization of the space of leaves of the foliation defined by a quadratic differential in the classical theory for $SL_2$. Our conjectural construction would determine the exponents for $SL_3$ WKB problems, and it can be put into practice on examples.

  2. Geothermal Maps | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently20,000 RussianBy: Thomas P. D'Agostino, Undersecretary11-161-LNGGary M.GenaWhere1Map of

  3. Fault Mapping | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model,DOEHazelPennsylvania: EnergyExolisFairway,FarmersFastcap SystemsShearMapping Jump

  4. Site Map - EERE Commercialization Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol HomeFacebookScholarship Fund3 Outlook forSDPPP Individual Permit:Site Map

  5. Site Map | DOE Data Explorer

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol HomeFacebookScholarship Fund3 Outlook forSDPPP Individual Permit:Site MapSite

  6. Site Map | ScienceCinema

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol HomeFacebookScholarship Fund3 Outlook forSDPPP Individual Permit:SiteSite Map

  7. ARM - TWP-ICE Maps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadap Documentation TDMADAP :ProductsVaisalaAlaskaInstruments NSASteeringContactsTWP-ICE Maps

  8. Entanglement distillation by extendible maps

    E-Print Network [OSTI]

    Lukasz Pankowski; Fernando G. S. L. Brandao; Michal Horodecki; Graeme Smith

    2013-08-25T23:59:59.000Z

    It is known that from entangled states that have positive partial transpose it is not possible to distill maximally entangled states by local operations and classical communication (LOCC). A long-standing open question is whether maximally entangled states can be distilled from every state with a non-positive partial transpose. In this paper we study a possible approach to the question consisting of enlarging the class of operations allowed. Namely, instead of LOCC operations we consider k-extendible operations, defined as maps whose Choi-Jamiolkowski state is k-extendible. We find that this class is unexpectedly powerful - e.g. it is capable of distilling EPR pairs even from product states. We also perform numerical studies of distillation of Werner states by those maps, which show that if we raise the extension index k simultaneously with the number of copies of the state, then the class of k-extendible operations is not that powerful anymore and provide a better approximation to the set of LOCC operations.

  9. Masking line foregrounds in intensity mapping surveys

    E-Print Network [OSTI]

    Breysse, Patrick C; Kamionkowski, Marc

    2015-01-01T23:59:59.000Z

    We address the problem of line confusion in intensity mapping surveys and explore the possibility to mitigate line foreground contamination by progressively masking the brightest pixels in the observed map. We consider experiments targeting CO(1-0) at $z=3$, Ly$\\alpha$ at $z=7$, and CII at $z=7$, and use simulated intensity maps, which include both clustering and shot noise components of the signal and possible foregrounds, in order to test the efficiency of our method. We find that for CO and Ly$\\alpha$ it is quite possible to remove most of the foreground contribution from the maps via only 1%-3% pixel masking. The CII maps will be more difficult to clean, however, due to instrumental constraints and the high-intensity foreground contamination involved. While the masking procedure sacrifices much of the astrophysical information present in our maps, we demonstrate that useful cosmological information in the targeted lines can be successfully retrieved.

  10. Bifurcations of homoclinic orbits in bimodal maps

    E-Print Network [OSTI]

    Kai T. Hansen

    1994-11-04T23:59:59.000Z

    We discuss the bifurcation structure of homoclinic orbits in bimodal one dimensional maps. The universal structure of these bifurcations with singular bifurcation points and the web of bifurcation lines through the parameter space are described. The bifurcations depend on two parameters (codimension 2 bifurcations). We find the bifurcation lines exactly in a symbolic dynamics parameter plane and numerically in the parameter planes of a polynomial map and a piecewise linear map.

  11. Weyl laws for partially open quantum maps

    E-Print Network [OSTI]

    Emmanuel Schenck

    2009-04-03T23:59:59.000Z

    We study a toy model for "partially open" wave-mechanical system, like for instance a dielectric micro-cavity, in the semiclassical limit where ray dynamics is applicable. Our model is a quantized map on the 2-dimensional torus, with an additional damping at each time step, resulting in a subunitary propagator, or "damped quantum map". We obtain analogues of Weyl's laws for such maps in the semiclassical limit, and draw some more precise estimates when the classical dynamic is chaotic.

  12. Some examples of exponentially harmonic maps

    E-Print Network [OSTI]

    A D Kanfon; A Fzfa; D Lambert

    2002-05-15T23:59:59.000Z

    The aim of this paper is to study some examples of exponentially harmonic maps. We study such maps firstly on flat euclidean and Minkowski spaces and secondly on Friedmann-Lema\\^ itre universes. We also consider some new models of exponentially harmonic maps which are coupled with gravity which happen to be based on a generalization of the lagrangian for bosonic strings coupled with dilatonic field.

  13. Mapping Particle Charges in Battery Electrodes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mapping Particle Charges in Battery Electrodes Print The deceivingly simple appearance of batteries masks their chemical complexity. A typical lithium-ion battery in a cell phone...

  14. Speech processing using maximum likelihood continuity mapping

    DOE Patents [OSTI]

    Hogden, John E. (Santa Fe, NM)

    2000-01-01T23:59:59.000Z

    Speech processing is obtained that, given a probabilistic mapping between static speech sounds and pseudo-articulator positions, allows sequences of speech sounds to be mapped to smooth sequences of pseudo-articulator positions. In addition, a method for learning a probabilistic mapping between static speech sounds and pseudo-articulator position is described. The method for learning the mapping between static speech sounds and pseudo-articulator position uses a set of training data composed only of speech sounds. The said speech processing can be applied to various speech analysis tasks, including speech recognition, speaker recognition, speech coding, speech synthesis, and voice mimicry.

  15. Alternative Fuels Data Center: Maps and Data

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    fuels such as biodiesel, compressed natural gas (CNG), and liquefied natural gas (LNG). Source: Federal Highway Administration (FHA). National Statistics and Maps. 2007....

  16. Visualizing the logistic map with a microcontroller

    E-Print Network [OSTI]

    Juan D. Serna; Amitabh Joshi

    2011-12-25T23:59:59.000Z

    The logistic map is one of the simplest nonlinear dynamical systems that clearly exhibit the route to chaos. In this paper, we explored the evolution of the logistic map using an open-source microcontroller connected to an array of light emitting diodes (LEDs). We divided the one-dimensional interval $[0,1]$ into ten equal parts, and associated and LED to each segment. Every time an iteration took place a corresponding LED turned on indicating the value returned by the logistic map. By changing some initial conditions of the system, we observed the transition from order to chaos exhibited by the map.

  17. Testing Hyperspectral Data for Geobatanical Anomaly Mapping,...

    Open Energy Info (EERE)

    Data for Geobatanical Anomaly Mapping, Dixie Valley, Nevada, Geothermal Area Jump to: navigation, search OpenEI Reference LibraryAdd to library Report: Testing Hyperspectral Data...

  18. Visualizing the logistic map with a microcontroller

    E-Print Network [OSTI]

    Serna, Juan D

    2011-01-01T23:59:59.000Z

    The logistic map is one of the simplest nonlinear dynamical systems that clearly exhibit the route to chaos. In this paper, we explored the evolution of the logistic map using an open-source microcontroller connected to an array of light emitting diodes (LEDs). We divided the one-dimensional interval $[0,1]$ into ten equal parts, and associated and LED to each segment. Every time an iteration took place a corresponding LED turned on indicating the value returned by the logistic map. By changing some initial conditions of the system, we observed the transition from order to chaos exhibited by the map.

  19. Hydrothermal alteration mineral mapping using hyperspectral imagery...

    Open Energy Info (EERE)

    in Dixie Valley, Nevada Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: Hydrothermal alteration mineral mapping using hyperspectral...

  20. Digital Mapping Of Structurally Controlled Geothermal Features...

    Open Energy Info (EERE)

    GPS Units And Pocket Computers Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Digital Mapping Of Structurally Controlled Geothermal Features...

  1. Digital Mapping Of Structurally Controlled Geothermal Features...

    Open Energy Info (EERE)

    Gps Units And Pocket Computers Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Digital Mapping Of Structurally Controlled Geothermal Features...

  2. Approximations by Orthonormal Mapped Chebyshev Functions for ...

    E-Print Network [OSTI]

    2014-03-12T23:59:59.000Z

    a School of Mathematical Science, Xiamen University, 361005 Xiamen, China .... suitable mapping can be used to approximate functions on the whole line R (cf.

  3. Error Analysis for Mapped Jacobi Spectral Methods

    E-Print Network [OSTI]

    2005-08-19T23:59:59.000Z

    Nov 30, 2003 ... Journal of Scientific Computing, Vol. 24, No. 2, August ... locally refined grid, a popular strategy is to use a suitable mapping which transforms a...

  4. APS Map | Overview | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    technical facility: the linear accelerator, the booster synchrotron, the electron storage ring, insertion devices, and the experiment hall. APS systems map Next: Linear Accelerator...

  5. TABLE OF CONTENTS NIST Map ...................................................................................................................................................3

    E-Print Network [OSTI]

    TABLE OF CONTENTS NIST Map the Power Grid PML TIME SPEAKER UNIVERSITY TITLE LAB 3:00P Brian Weinstein American University Temperature

  6. Migrating to Autodesk MapGuide Enterprise 2008

    E-Print Network [OSTI]

    Ahmad, Sajjad

    Migration Autodesk MapGuide SDF 2 Files MapGuide 6.5 SDF 2.0 files were created with either Map 3D (manually) or using the Autodesk MapGuide 6.5 SDF Loader. Since MapGuide 2008 requires SDF 3.0 or higher versions, the SDF files will have to either be recreated with Map 3D or by using Load Procedures with Map

  7. NCBI Map Viewer Tutorial NCBI's Map Viewer can be used to visualize an organism's genome and

    E-Print Network [OSTI]

    Levin, Judith G.

    .1" link. Enter GDNF as a search term and click on the "Find" button. Filter your search result for gene sapiens (human) Build 36" link. Enter PRNP as a search term. Name the chromosome on which this gene mutated. Search for "GDNF" in the Map Viewer. Access the Human Map Viewer page by clicking on the Map

  8. On Constructing a Base Map for Collaborative Map Generation and its Application in Urban Mobility Planning

    E-Print Network [OSTI]

    planning depends largely on the presence of good navigation data in the form of vectorized maps countries. On the other hand, good paper maps collected by the city authorities are widely available. Nevertheless, the integration of these GPS traces is itself a challenge and requires a good base map

  9. MINUTES MAPS Board Meeting April 9, 2013, MAPS Office 4-6:30pm

    E-Print Network [OSTI]

    Hitchcock, Adam P.

    operations vs. strategic planning) Must have qualifications and characteristics Must have integrity in MAPS control b. Some changes have already been made c. Things to post include: by-laws, new President. Arlen to lead discussion) c. Discussion of MAPS handbooks and production MAPS handbook

  10. Buildings by Name Bldg No Map Grid Func ons & Places Bldg No or Map

    E-Print Network [OSTI]

    #12;Buildings by Name Bldg No Map Grid Func ons & Places Bldg No or Map Grid Bldg No Buildings by Number Map Grid 1320 E San Pasqual (Caltech Y) 56 E4 24-Hour Security 66 1 Brown Gymnasium B5 1350 E San

  11. MAP SKILLS FOR ENVIRONMENTAL SCIENCE Gord Beck | Cathy Moulder | Lloyd Reeds Map Collection, Mills Library

    E-Print Network [OSTI]

    Haykin, Simon

    system) Military (Grid system) These 3 systems appear on Canadian topographic maps All systems use the intersection of an X and Y plane MAP REFERENCING SYSTEMS #12;Universal Transverse Mercator (UTM) Grid the UTM Grid It appears as BLUE lines on the surface of the map, and is indicated by BLUE numbers outside the

  12. Generating composite thematic maps from semantically-different collections of shapefiles and map services

    E-Print Network [OSTI]

    Rejaie, Reza

    Generating composite thematic maps from semantically-different collections of shapefiles and map mostly in shapefiles, and their online visualization as composite thematic maps. Following designIMS-based services. Shapefiles contributed by geoscience researchers and registered in the GEONgrid, are transferred

  13. Data system for automatic flux mapping applications

    SciTech Connect (OSTI)

    Couch, R.D.; Kasinoff, A.M.; Neuner, J.A.; Oates, R.M.

    1980-12-16T23:59:59.000Z

    In an automatic flux mapping system utilizing a microprocessor for control and data information processing, signals from the incore detectors providing the flux mapping operation are converted to a frequency link and are made available to the microprocessor via a programmable timer thus minimizing the participation of the microprocessor so that the microprocessor can be made more available to satisfy other tasks.

  14. Positivity of linear maps under tensor powers

    E-Print Network [OSTI]

    Alexander Mller-Hermes; David Reeb; Michael M. Wolf

    2015-02-19T23:59:59.000Z

    We investigate linear maps between matrix algebras that remain positive under tensor powers, i.e., under tensoring with $n$ copies of themselves. Completely positive and completely co-positive maps are trivial examples of this kind. We show that for every $n\\in\\mathbb{N}$ there exist non-trivial maps with this property and that for two-dimensional Hilbert spaces there is no non-trivial map for which this holds for all $n$. For higher dimensions we reduce the existence question of such non-trivial "tensor-stable positive maps" to a one-parameter family of maps and show that an affirmative answer would imply the existence of NPPT bound entanglement. As an application we show that any tensor-stable positive map that is not completely positive yields an upper bound on the quantum channel capacity, which for the transposition map gives the well-known cb-norm bound. We furthermore show that the latter is an upper bound even for the LOCC-assisted quantum capacity, and that moreover it is a strong converse rate for this task.

  15. GERSVIEW: A New Database for Web Mapping

    E-Print Network [OSTI]

    Gilbes, Fernando

    GERSVIEW: A New Database for Web Mapping William J. Hernndez, M.S. Graduate Student Department structure Develop an ArcIMS Web Mapping Interface Present spatial data created by the Geological and Environmental Remote Sensing Laboratory (GERS) Projects via ArcIMS. Create GERSVIEW home web page (launch site

  16. GERSVIEW: A New Database for Web Mapping

    E-Print Network [OSTI]

    Gilbes, Fernando

    GERSVIEW: A New Database for Web Mapping William J. Hernndez, M.S. Graduate Student DepartmentIMS Web Mapping Interface Present spatial data created by the Geological and Environmental Remote Sensing Laboratory (GERS) Projects via ArcIMS. Create GERSVIEW home web page (launch site) #12;ArcIMS ArcIMS 9

  17. GROUNDWATER MAPPING AND ASSESSMENT IN BRITISH COLUMBIA

    E-Print Network [OSTI]

    #12;r GROUNDWATER MAPPING AND ASSESSMENT IN BRITISH COLUMBIA VOLUME I: Review and Recommendations and Turner Groundwater Consultants P.O. Box 43001 Victoria, B.C. V8X 3G2 October 1993 #12;DISCLAIMER of Groundwater Information in British Columbia 6 2.1 Sources of Groundwater Mapping and Assessment Information 6

  18. Campus Parking Map University of California

    E-Print Network [OSTI]

    Lee, Seung-Wuk

    Campus Parking Map University of California BERKELEY #12;Campus Building Locations Parking Lots/Garages Building Name Grid Building Name(Continued) Grid Building Name(Continued) Grid Grid Parking Information parking spaces are located throughout the campus; areas are indicated on the map on reverse. Bicycles

  19. Collective Behavior of Coupled Chaotic Maps

    E-Print Network [OSTI]

    M. G. Cosenza

    1995-07-21T23:59:59.000Z

    The collective behavior of a coupled map lattice having {\\it unbounded} chaotic local dynamics is investigated through the properties of its mean field. The presence of unstable periodic orbits in the local maps determines the emergence of nontrivial collective behavior. Windows of collective period-two states are found in parameter space.

  20. Soil Survey and Ecological Sites: Integrated Map Unit Design and

    E-Print Network [OSTI]

    Intensity Methods Map units Order 1 Grid mapping 2 (detailed) Confirm boundary and components 3 (broad) Confirm dominant components 4 Reconnaissance #12;Intensity Methods Map units Order 1 Grid mapping SingleSoil Survey and Ecological Sites: Integrated Map Unit Design and Interpretation Arlene J. Tugel

  1. Feasibility Grids for Localization and Mapping in Crowded Urban Scenes

    E-Print Network [OSTI]

    Wang, Chieh-Chih "Bob"

    Feasibility Grids for Localization and Mapping in Crowded Urban Scenes Shao-Wen Yang and Chieh mapping method is the occupancy grid mapping algorithm [1] which represents maps by a collection of fine-grained grid cells that model the occupancy states of the environment. Occupancy grid mapping representation

  2. Title: Open Street Map shapefile downloads Data Creator /

    E-Print Network [OSTI]

    Title: Open Street Map shapefile downloads Data Creator / Copyright Owner: OpenStreetMap Publisher applications. Data Type: Vector Digital Data Format: Shapefile Datum / Map Projection: WGS84 Resolution: N site: http://downloads.cloudmade.com/ Citation: OpenStreetMap. "OpenStreetMap shapefile downloads

  3. Task mapping for non-contiguous allocations.

    SciTech Connect (OSTI)

    Leung, Vitus Joseph; Bunde, David P. [Knox College, Galesburg, IL; Ebbers, Johnathan [Knox College, Galesburg, IL; Price, Nicholas W. [Knox College, Galesburg, IL; Swank, Matthew [Knox College, Galesburg, IL; Feer, Stefan P. [3M Health Information Systems, Inc., Wallingford, CT; Rhodes, Zachary D. [Allstate Corporation, Northbrook, IL

    2013-02-01T23:59:59.000Z

    This paper examines task mapping algorithms for non-contiguously allocated parallel jobs. Several studies have shown that task placement affects job running time for both contiguously and non-contiguously allocated jobs. Traditionally, work on task mapping either uses a very general model where the job has an arbitrary communication pattern or assumes that jobs are allocated contiguously, making them completely isolated from each other. A middle ground between these two cases is the mapping problem for non-contiguous jobs having a specific communication pattern. We propose several task mapping algorithms for jobs with a stencil communication pattern and evaluate them using experiments and simulations. Our strategies improve the running time of a MiniApp by as much as 30% over a baseline strategy. Furthermore, this improvement increases markedly with the job size, demonstrating the importance of task mapping as systems grow toward exascale.

  4. Density equalizing map projections: A new algorithm

    SciTech Connect (OSTI)

    Merrill, D.W.; Selvin, S.; Mohr, M.S.

    1992-02-01T23:59:59.000Z

    In the study of geographic disease clusters, an alternative to traditional methods based on rates is to analyze case locations on a transformed map in which population density is everywhere equal. Although the analyst`s task is thereby simplified, the specification of the density equalizing map projection (DEMP) itself is not simple and continues to be the subject of considerable research. Here a new DEMP algorithm is described, which avoids some of the difficulties of earlier approaches. The new algorithm (a) avoids illegal overlapping of transformed polygons; (b) finds the unique solution that minimizes map distortion; (c) provides constant magnification over each map polygon; (d) defines a continuous transformation over the entire map domain; (e) defines an inverse transformation; (f) can accept optional constraints such as fixed boundaries; and (g) can use commercially supported minimization software. Work is continuing to improve computing efficiency and improve the algorithm.

  5. Density equalizing map projections: A new algorithm

    SciTech Connect (OSTI)

    Merrill, D.W.; Selvin, S.; Mohr, M.S.

    1992-02-01T23:59:59.000Z

    In the study of geographic disease clusters, an alternative to traditional methods based on rates is to analyze case locations on a transformed map in which population density is everywhere equal. Although the analyst's task is thereby simplified, the specification of the density equalizing map projection (DEMP) itself is not simple and continues to be the subject of considerable research. Here a new DEMP algorithm is described, which avoids some of the difficulties of earlier approaches. The new algorithm (a) avoids illegal overlapping of transformed polygons; (b) finds the unique solution that minimizes map distortion; (c) provides constant magnification over each map polygon; (d) defines a continuous transformation over the entire map domain; (e) defines an inverse transformation; (f) can accept optional constraints such as fixed boundaries; and (g) can use commercially supported minimization software. Work is continuing to improve computing efficiency and improve the algorithm.

  6. Stretch fast dynamo mechanism via conformal mapping in Riemannian manifolds

    SciTech Connect (OSTI)

    Garcia de Andrade, L. C. [Departamento de Fisica Teorica, Instituto de Fisica, UERJ Rua Sao Fco. Xavier 524, Rio de Janeiro, RJ Maracana, CEP:20550-003 (Brazil)

    2007-10-15T23:59:59.000Z

    Two new analytical solutions of the self-induction equation in Riemannian manifolds are presented. The first represents a twisted magnetic flux tube or flux rope in plasma astrophysics, where the rotation of the flow implies that the poloidal field is amplified from toroidal field, in the spirit of dynamo theory. The value of the amplification depends on the Frenet torsion of the magnetic axis of the tube. Actually this result illustrates the Zeldovich stretch, twist, and fold method to generate dynamos from straight and untwisted ropes. Based on the fact that this problem was previously handled, using a Riemannian geometry of twisted magnetic flux ropes [Phys Plasmas 13, 022309 (2006)], investigation of a second dynamo solution, conformally related to the Arnold kinematic fast dynamo, is obtained. In this solution, it is shown that the conformal effect on the fast dynamo metric enhances the Zeldovich stretch, and therefore a new dynamo solution is obtained. When a conformal mapping is performed in an Arnold fast dynamo line element, a uniform stretch is obtained in the original line element.

  7. Map of Erosion Risk (C2)3 Vegetation Indices and Map of Minimum Forested Area4 5&

    E-Print Network [OSTI]

    are required forest areas for Vietnam Erosion Risk Map Cover types C1 Natural Forests >1.7 Plantation forest.2 (ESRI, 2008), to generate a map of required protective forest area for Vietnam. (3) (4) (5Results Map of Erosion Risk (C2)3 Vegetation Indices and Map of Minimum Forested Area4 5& Map

  8. 2007 Yerkes Summer Institute Day Laboratory -Mapping the Yerkes Grounds 26 A Google map of the Williams Bay area

    E-Print Network [OSTI]

    Collar, Juan I.

    , a coordinate system appears as a simple grid overlaid on the map (see figure below). Some specialized maps/Columbus to State/55th . An example map of an imaginary Junk Food Island. The grid is a basic coordinate system2007 Yerkes Summer Institute Day Laboratory - Mapping the Yerkes Grounds 26 A Google map

  9. A review of "The Flight of the Earls: An Illustrated History" by John McCavitt with original drawings by Sen Brgin

    E-Print Network [OSTI]

    Mulvihill, Maureen

    2009-01-01T23:59:59.000Z

    as it will to their Hispanist counterparts. John McCavitt with original drawings by Se?n ? Br?g?in. The Flight of the Earls: An Illustrated History. Co. Down, No. Ireland: April Sky Design. 144pp + 127 B&W ill + 35 color ill. Cloth, ?20, paper, ?14. Review by maureen e...?g?in (An Cloch?n, County Donegal) ? 2007. From jacket (verso), John McCavitt?s Flight of the Earls: An Illustrated History (2007); and image detail, p 74. With kind permission, May 2008 reviews 27 Warrior heroes and the lore of warrior heroes...

  10. Variations in Map Products Demonstrated During the FRMAC Fukushima Daiichi Response

    SciTech Connect (OSTI)

    Pemberton, W. J.

    2012-04-03T23:59:59.000Z

    This presentation provides a brief summary of the Fukushima Daiichi disaster, discussion on map uses and production, early phase maps, intermediate phase maps, and late phase maps.

  11. Wind: wind power density maps at 50 m above ground and 1km resolution...

    Open Energy Info (EERE)

    PDF maps of Eastern China wind mapping. (Purpose): To provide information on the wind resource potential in eastern China. Includes maps of full mapping region, and 15...

  12. Mapping of complex marine environments using an unmanned surface craft

    E-Print Network [OSTI]

    Leedekerken, Jacques Chadwick

    2011-01-01T23:59:59.000Z

    Recent technology has combined accurate GPS localization with mapping to build 3D maps in a diverse range of terrestrial environments, but the mapping of marine environments lags behind. This is particularly true in shallow ...

  13. eSales Interactive Mapping -Viewing and Printing Introduction

    E-Print Network [OSTI]

    eSales Interactive Mapping - Viewing and Printing Introduction Our eSales system includes an integrated interactive map facility. This allows you to view and print maps for all lots on offer. Various

  14. Using Maps to Predict Solar Futures | Department of Energy

    Office of Environmental Management (EM)

    Using Maps to Predict Solar Futures Using Maps to Predict Solar Futures June 19, 2015 - 1:43pm Addthis Using Maps to Predict Solar Futures Dr. Lidija Sekaric Dr. Lidija Sekaric...

  15. Technology Forum Map and List of Awardees' Posters and Exhibits...

    Office of Environmental Management (EM)

    Technology Forum Map and List of Awardees' Posters and Exhibits Technology Forum Map and List of Awardees' Posters and Exhibits Technology Forum map and list of exhibits.pdf More...

  16. College Students GIS Spatial Concept Knowledge Assessed by Concept Maps

    E-Print Network [OSTI]

    Oda, Katsuhiko

    2012-07-16T23:59:59.000Z

    an introductory-level GIS course to create concept maps about space and revised their concept maps in three experiment sessions. For the first question, the researcher scored the sixty obtained concept maps and statistically analyzed those scores to examine...

  17. Optimal Path Generation for Monocular Simultaneous Localization and Mapping

    E-Print Network [OSTI]

    Roorda, Timothy Isaac

    2014-09-01T23:59:59.000Z

    Monocular Simultaneous Localization and Mapping (MonoSLAM), a derivative of Simultaneous Localization and Mapping (SLAM), is a navigation method for autonomous vehicles that uses only an inertial measurement unit and a camera to map the environment...

  18. Optimal Path Generation for Monocular Simultaneous Localization and Mapping

    E-Print Network [OSTI]

    Roorda, Timothy Isaac

    2014-09-01T23:59:59.000Z

    Monocular Simultaneous Localization and Mapping (MonoSLAM), a derivative of Simultaneous Localization and Mapping (SLAM), is a navigation method for autonomous vehicles that uses only an inertial measurement unit and a camera to map the environment...

  19. Beyond the Model and Into the Map: A Protein Abstract

    E-Print Network [OSTI]

    Fraser, James Solomon

    2010-01-01T23:59:59.000Z

    the atomic peak height is map-grid resolution dependent anda 2F o -F c Bhat omit map with a grid spacing of one-thirdincreasing grid sampling leads to increasing maps sizes that

  20. Using Process Mapping to Facilitate Positive Library Change

    E-Print Network [OSTI]

    Rosen, Jay

    Using Process Mapping to Facilitate Positive Library Change Emily Campbell Special Projects Librarian for Collections University of Michigan #12;What is Process Mapping? "Business process mapping organization's objectives to make sure that all processes are aligned with the company's values

  1. Maps of crude oil futures

    SciTech Connect (OSTI)

    Masters, C.D.

    1986-05-01T23:59:59.000Z

    The Crude Oil Futures presentation shows their concept of the quantity of oil possibly present (the combination of conventional demonstrated reserves plus undiscovered recoverable resources) within the areas outlined. The Crude Oil Futures is not as an exploration map but as a perspective on the distribution of world oil. The occurrence of oil is, after all, a function of particular geologic factors that are not everywhere present. Furthermore, large amounts of oil can occur only where the several necessary independent variables (geologic factors) combine optimally. In the Western Hemisphere, similar minimal crude oil futures are shown for North America and South America. This similarity is a reflection not of similar geology but rather of the fact that most of the oil has already been produced from North America, whereas South America as a whole (except for Venezuela) possesses a geology less likely to produce oil. In Europe, Africa, and Asia, four regions are dominant: the Middle East, Libya, North Sea, and west Siberia. Paleogeography and source rock distribution were keys to this distribution - the Middle East and Libya reflecting the Tethyan association, and the North Sea and west Siberia benefitting from the Late Jurassic marine transgression into geographic environments where ocean circulation was restricted by tectonic events.

  2. Periodic Cluster Mutations and Related Integrable Maps

    E-Print Network [OSTI]

    Allan P Fordy

    2014-03-31T23:59:59.000Z

    One of the remarkable properties of cluster algebras is that any cluster, obtained from a sequence of mutations from an initial cluster, can be written as a Laurent polynomial in the initial cluster (known as the "Laurent phenomenon"). There are many nonlinear recurrences which exhibit the Laurent phenomenon and thus unexpectedly generate integer sequences. The mutation of a typical quiver will not generate a recurrence, but rather an erratic sequence of exchange relations. How do we "design" a quiver which gives rise to a given recurrence? A key role is played by the concept of "periodic cluster mutation", introduced in 2009. Each recurrence corresponds to a finite dimensional map. In the context of cluster mutations, these are called "cluster maps". What properties do cluster maps have? Are they integrable in some standard sense? In this review I describe how integrable maps arise in the context of cluster mutations. I first explain the concept of "periodic cluster mutation", giving some classification results. I then give a review of what is meant by an integrable map and apply this to cluster maps. Two classes of integrable maps are related to interesting monodromy problems, which generate interesting Poisson algebras of functions, used to prove complete integrability and a linearisation. A connections to the Hirota-Miwa equation is explained.

  3. ,"U.S. Refinery Net Production"

    U.S. Energy Information Administration (EIA) Indexed Site

    mbblpda.xls" ,"Available from Web Page:","http:www.eia.govdnavpetpetpnprefp2dcnusmbblpda.htm" ,"Source:","Energy Information Administration" ,"For Help,...

  4. U.S. Fuel Consumed at Refineries

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron Spin Transition in2,EHSSCoal Production andOrigin219:131,097 152,084Fuel

  5. U.S. Refineries Competitive Positions

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1Stocks Nov-14TotalThe Outlook269,023Year Jan

  6. U.S. Refinery Net Input

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1Stocks Nov-14TotalThe Outlook269,023Year JanCrude Oil andNov-14Nov-14

  7. U.S. Refinery Net Production

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1Stocks Nov-14TotalThe Outlook269,023Year JanCrude Oil

  8. U.S. Refinery Utilization and Capacity

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1Stocks Nov-14TotalThe Outlook269,023Year JanCrude OilNov-14 Dec-14

  9. U.S. Refinery Net Input

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are nowTotal" (Percent) Type: Sulfur Content API GravityDakota" "Fuel, quality",Area: U.S. East Coast (PADD 1) New120,814 136,932 130,902672009Dec-1420092009

  10. U.S. Refinery Net Production

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are nowTotal" (Percent) Type: Sulfur Content API GravityDakota" "Fuel, quality",Area: U.S. East Coast (PADD 1) New120,814 136,932 130,902672009Dec-14200920092009

  11. U.S. Refinery Utilization and Capacity

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are nowTotal" (Percent) Type: Sulfur Content API GravityDakota" "Fuel, quality",Area: U.S. East Coast (PADD 1) New120,814 136,9322009 2010 2011 2012 2013 2014

  12. Virginia Biodiesel Refinery | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit withTianlin BaxinUmweltVillage ofInformationVineyard EnergyVireol

  13. Myriant Succinic Acid BioRefinery

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of Contamination in Many Devils Wash, Shiprock, New Mexico |

  14. Mapping Particle Charges in Battery Electrodes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn12electronEnergy Manufacturing EnergyMappingMappingMapping

  15. Reciprocal space mapping of epitaxial materials using position-sensitive x-ray detection

    SciTech Connect (OSTI)

    Lee, S.R.; Doyle, B.L.; Drummond, T.J.; Medernach, J.W.; Schneider, R.P. Jr.

    1994-10-01T23:59:59.000Z

    Reciprocal space mapping can be efficiently carried out using a position-sensitive x-ray detector (PSD) coupled to a traditional double-axis diffractometer. The PSD offers parallel measurement of the total scattering angle of all diffracted x-rays during a single rocking-curve scan. As a result, a two-dimensional reciprocal space map can be made in a very short time similar to that of a one-dimensional rocking-curve scan. Fast, efficient reciprocal space mapping offers numerous routine advantages to the x-ray diffraction analyst. Some of these advantages are the explicit differentiation of lattice strain from crystal orientation effects in strain-relaxed heteroepitaxial layers; the nondestructive characterization of the size, shape and orientation of nanocrystalline domains in ordered-alloy epilayers; and the ability to measure the average size and shape of voids in porous epilayers. Here, the PSD-based diffractometer is described, and specific examples clearly illustrating the advantages of complete reciprocal space analysis are presented.

  16. anatomical mapping analysis: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Markov Interval Maps CERN Preprints Summary: We set up a multiresolution analysis on fractal sets derived from limit sets of Markov Interval Maps. For this we consider the ...

  17. Assessment and Mapping of the Riverine Hydrokinetic Resource...

    Broader source: Energy.gov (indexed) [DOE]

    Assessment and Mapping of the Riverine Hydrokinetic Resource in the Continental United States Assessment and Mapping of the Riverine Hydrokinetic Resource in the Continental United...

  18. Geologic map of the Sulphur Springs Area, Valles Caldera Geothermal...

    Open Energy Info (EERE)

    Goff,J. N. Gardner. Geologic map of the Sulphur Springs Area, Valles Caldera Geothermal System, New Mexico. Map. Place of publication not provided. Los Alamos National...

  19. Dual spatial maps of transcript and protein abundance in the...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Dual spatial maps of transcript and protein abundance in the mouse brain. Dual spatial maps of transcript and protein abundance in the mouse brain. Abstract: Integrating...

  20. Road Map Team Proposal Form Proposal: CAR29

    E-Print Network [OSTI]

    Suzuki, Masatsugu

    Road Map Team Proposal Form Proposal: CAR29 1: Road Map Team Name, such as solar energy and fuel cell technologies, energy storage methods and improved

  1. Renewable Energy Resource Maps and Screening Tools | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Resource Maps and Screening Tools Renewable Energy Resource Maps and Screening Tools Renewable energy resources are available across the United States but vary greatly depending on...

  2. africa mapping progress: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hu representation called progressive significance map (prog-sig-map) for error-resilient SPC. It structures coding methods, such as arithmetic coding) takes advantage of the...

  3. THE EVALUATION MAP AND HOMOLOGY Daniel H. Gottlieb

    E-Print Network [OSTI]

    tant role in the study of evaluation maps of mapping spaces other than XX . The ... The preparation of this paper was supported in part by the National Science.

  4. Mapping the Parameter Space with Oscillatory and Steady State ...

    E-Print Network [OSTI]

    2013-09-26T23:59:59.000Z

    mapping of the parameter space even in the presence of noise. ... mapping encompasses two major issues. ... attention from various fields of applied science

  5. Space Mapping: Models, Sensitivities, and Trust-Regions Methods 1 ...

    E-Print Network [OSTI]

    We consider also a di erent perspective of space mapping and apply it, ... built by composition of the space mapping and the coarse model is a regular function.

  6. Exploring the Wind Manufacturing Map | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office of Energy Efficiency and Renewable Energy. Addthis Related Articles This map shows wind potential capacity for turbine hub heights at 140 meters. Mapping the Frontier of New...

  7. 5 6 IEEE SOFTWARE May/June 2000 0740-7459/00/$10.00 2000 IEEE This article illustrates the automation of

    E-Print Network [OSTI]

    Lavazza, Luigi

    5 6 IEEE SOFTWARE May/June 2000 0740-7459/00/$10.00 2000 IEEE This article illustrates and metrics tools. (See the "Research and Practice" side- bar for more background information.) A measurement to automate the extraction of reliable and process-confor- mant data for the development of a Telecom

  8. DEVELOPMENT OF A PILED-FOUNDATION MODEL The models discussed in Chapter 3 illustrated the importance of modelling a building's foundation

    E-Print Network [OSTI]

    Talbot, James P.

    85 Chapter 4 DEVELOPMENT OF A PILED-FOUNDATION MODEL The models discussed in Chapter 3 illustrated-isolation. It was concluded that a generic base- isolated building model requires a comprehensive model of a piled foundation of the pile head due to longitudinal and transverse motion of the pile; interaction between neighbouring

  9. Appears in Proceedings of IEEE Visualization '00 (October 2000, Salt Lake City, UT), IEEE Computer Society Press, pp. Volume Illustration: Non-Photorealistic Rendering of Volume Models

    E-Print Network [OSTI]

    Adali, Tulay

    Society Press, pp. 195-202. Volume Illustration: Non-Photorealistic Rendering of Volume Models David Ebert the structure of a volume model is a problem not fully solved by existing volume rendering approaches. Physics-based volume rendering approaches create images which may match the appearance of translucent materials

  10. Photo illustration by George Lange, with Michael Miller (Plug) Popular Mechanics Impact of PlugImpact of Plug--in Hybrids on thein Hybrids on the

    E-Print Network [OSTI]

    1 1 Photo illustration by George Lange, with Michael Miller (Plug) Popular Mechanics Impact system Turbo Diesel hybrid Future options Gasoline Turbo Diesel Hybrid plug-in hybrid Battery electric Fuel Cell Audi Turbo Diesel GM Volt Hyundai's Fuel Cell Tesla's Battery electric car #12;7 13 Barriers

  11. Illustrative Data Graphics in 18th19th Century Style: A Case Study Benjamin Bach, Pierre Dragicevic, Samuel Huron, Petra Isenberg, Yvonne Jansen, Charles Perin,

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Illustrative Data Graphics in 18th­19th Century Style: A Case Study Benjamin Bach, Pierre's march--for its graphical excellency but also its aesthetic, elegance, and technique. The specific style of the early graphics arose from a combination of hand-crafted appearance, clear and clean graphic design

  12. Example of computation in R and Bugs We illustrate some of the practical issues of simulation by fitting a single This

    E-Print Network [OSTI]

    Gelman, Andrew

    the general statistical package R. We proceed from data input, through statistical inference, to posterior in Bugs. Section C.4 presents several different ways of programming the model directly in RAPPENDIX C Example of computation in R and Bugs We illustrate some of the practical issues

  13. AUTORE TITOLO EDIZIONE NOTE #--A measure of everything. An illustrated guide to the science of measurement FireflyBooks,Buffalo.2005

    E-Print Network [OSTI]

    Bartocci, Claudio

    AUTORE TITOLO EDIZIONE NOTE #-- A measure of everything. An illustrated guide to the science dei proverbi Utet,TO,2004 #-- Dizionario dei registi del cinema mondiale A-F Einaudi,TO,2005 #-- Dizionario dei registi del cinema mondiale G-O Einaudi,TO,2005 #-- Dizionario dei registi del cinema mondiale

  14. HCEI Road Map: 2011 Edition (Brochure)

    SciTech Connect (OSTI)

    Braccio, R.; Finch, P.

    2011-08-01T23:59:59.000Z

    This road map outlines the 2011 key goals and strategies of the Hawaii Clean Energy Initiative, was founded based on a Memorandum of Understanding between the State of Hawaii and the U.S. Department of Energy in 2008.

  15. CCRS Landcover Maps From Satellite Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Trishchenko, Alexander

    The Canadian Centre for Remote Sensing (CCRS) presents several landcover maps over the SGP CART site area (32-40N, 92-102W) derived from satellite data including AVHRR, MODIS, SPOT vegetation data, and Landsat satellite TM imagery.

  16. boundary behavior of univalent harmonic mappings

    E-Print Network [OSTI]

    1910-70-32T23:59:59.000Z

    valent harmonic mapping f from the unit disk U onto a bounded convex ..... Our next result examines the stability of a function f given in The- orem 2 upon the...

  17. HCEI Road Map: 2011 Edition (Brochure)

    Office of Energy Efficiency and Renewable Energy (EERE)

    This road map outlines the 2011 key goals and strategies of the Hawaii Clean Energy Initiative, was founded based on a Memorandum of Understanding between the State of Hawaii and the U.S. Department of Energy in 2008.

  18. GIS-based energy consumption mapping

    E-Print Network [OSTI]

    Balta, Chrysi

    2014-11-27T23:59:59.000Z

    This project aims to provide a methodology to map energy consumption of the housing stock at a city level and visualise and evaluate different retrofitting scenarios. It is based on an engineering, bottom-up approach. It makes use...

  19. Mapping Savanna Land Change of Belize

    E-Print Network [OSTI]

    Wilson, Lauren

    2011-11-24T23:59:59.000Z

    was assessed using a confusion matrix. The results of the research confirmed the capabilities of Landsat imagery for mapping savannas and their land use. The classification of forest and savanna along with major land use pressures from agriculture...

  20. Science Maps in Action Dr. Katy Brner

    E-Print Network [OSTI]

    Menczer, Filippo

    Science Maps in Action Dr. Katy Brner Cyberinfrastructure for Network Science Center, Director Information Visualization Laboratory, Director School of Library and Information Science Indiana University Computational Scientometrics: Studying Science by Scientific Means Brner, Katy, Chen, Chaomei, and Boyack

  1. Anosov maps with rectangular holes. Nonergodic cases.

    E-Print Network [OSTI]

    Ingenier'ia. Universidad de la Rep'ublica C.C. 30, Montevideo, Uruguay E­mail: roma@fing.edu.uy; Fax: (598 Partially supported by CONICYT (Uruguay). 1 #12; Running head: Anosov maps with rectangular holes Address

  2. On Fibre Spaces and the Evaluation Map

    E-Print Network [OSTI]

    May 5, 2003 ... Also f : S n -> X is any map and it and are the natural liftings of ac and f. Let c: B +B" >Fbe de?ned by c(b) : (b, *). Then fate lifts fa.

  3. Antarctic Mapping Project ACTIVE RADAR CALIBRATOR

    E-Print Network [OSTI]

    Howat, Ian M.

    RADARSAT Antarctic Mapping Project ACTIVE RADAR CALIBRATOR INSTALLATION DOCUMENT October, 1999 ENVIRONMENTAL RESEARCH INSTITUTE OF MICHIGAN CENTER FOR EARTH SCIENCES ALASKA SAR FACILITY BYRD POLAR RESEARCH...................................................................................................................................................3 Active Radar Calibrator Testing

  4. Effect of noise on the standard mapping

    SciTech Connect (OSTI)

    Karney, C.F.F.; Rechester, A.B.; White, R.B.

    1981-03-01T23:59:59.000Z

    The effect of a small amount of noise on the standard mapping is considered. Whenever the standard mapping possesses accelerator models (where the action increases approximately linearly with time), the diffusion coefficient contains a term proportional to the reciprocal of the variance of the noise term. At large values of the stochasticity parameter, the accelerator modes exhibit a universal behavior. As a result the dependence of the diffusion coefficient on stochasticity parameter also shows some universal behavior.

  5. Geospatial Mapping K12 (GMap) 5th Annual Workshop

    E-Print Network [OSTI]

    Tipple, Brett

    Geospatial Mapping K12 (GMap) 5th Annual Workshop Oct 18-20, 2013 The Geospatial Mapping K12Teacher to collect, analyze, and map geospatial data on the Colorado Plateau.The project involves mapping two. Use GIS, GPS, and other geospatial technologies to enhance the understanding of issues and facilitate

  6. FACILITATING DATA EXPLORATION: DYNAMIC QUERIES ON A HEALTH STATISTICS MAP

    E-Print Network [OSTI]

    Golbeck, Jennifer

    . A thematic map of the United States is animated by adjusting sliders displayed on the side of the map. A time.g. proposing that a demographic factor might be linked to a cause of death.) More recently thematic maps helped in order to access the exact rate in an area. Research on map graphic design (e.g.. [2]) shows that careful

  7. Brain Image Registration Using CorticallyBrain Image Registration Using Cortically Constrained Harmonic MappingsConstrained Harmonic Mappings

    E-Print Network [OSTI]

    Leahy, Richard M.

    Harmonic MappingsConstrained Harmonic Mappings Anand A Joshi1, David W Shattuck2, Paul M Thompson2 and Richard M Leahy1 Subcortical Structure AIR Harmonic HAMMER Harmonic +Intensity Left Thalamus 0.79 0.68 0. Extrapolation of the surface map to the entire cortical volume by a harmonic map. 3. Refinement of the harmonic

  8. Efficient FISH mapping with small cDNA probe and its application in comparative mapping

    SciTech Connect (OSTI)

    Heng, H.H.Q.; Shi, X.M.; Tsui, L.C. [Univ. of Toronto, Ontario (Canada)

    1994-09-01T23:59:59.000Z

    Gene mapping for fluorescence in situ hybridization (FISH) is generally difficult for small probes, especially cDNA probes. Yet, different cDNA projects have generated large number of clones that can be useful in generating physical and transcription maps and as candidate genes in studying human genetic diseases. To develop an efficient FISH method for mapping small cDNA probes (generally around a few hundred bp in size), we have investigated different hybridization conditions, methods of probe preparation as well as slide preparation. Our results suggest that the efficiency of FISH mapping with cDNA probes is critically dependent on the probe labeling and concentration, the temperature of hybridization and washing, and the concentration of formamide present in the solution. These conditions may be optimized systematically. The use of probe self-ligation to increase {open_quotes}network{close_quotes} formation was another useful signal amplification method. So far, we have been able to determine precise chromosome location for 90% of the cDNA probes (45/50). The sizes of the successfully mapped clones were between 200 bp and 2.5 kb. One important extension of our study has been our ability to map cDNA probes from heterologous species. Nine cDNA clones (390 bp to 3 kb) from mouse, rat, rabbit, chicken, frog and fish were successfully mapped to specific regions of banded human chromosomes. The latter application should greatly facilitate comparative gene mapping and study of genome evolution through identification of syntenic groups.

  9. Forest fuel mapping and evaluation of LANDFIRE fuel maps in Boulder County, Colorado, USA

    E-Print Network [OSTI]

    Stephens, Scott L.

    Forest fuel mapping and evaluation of LANDFIRE fuel maps in Boulder County, Colorado, USA Kevin fuels to accumulate where previously frequent fires prevailed (Covington and Moore, 1994; Caprio management and mitigation is quantifying the fuel load and spatial arrangement of combustible material across

  10. Symplectic map description of Halley's comet dynamics

    E-Print Network [OSTI]

    G. Rollin; P. Haag; J. Lages

    2015-02-02T23:59:59.000Z

    The main features of 1P/Halley chaotic dynamics can be described by a two dimensional symplectic map. Using Mel'nikov integral we semi-analytically determine such a map for 1P/Halley taking into account gravitational interactions from the Sun and the eight planets. We determine the Solar system kick function ie the energy transfer to 1P/Halley along one passage through the Solar system. Our procedure allows to compute for each planet its contribution to the Solar system kick function which appears to be the sum of the Keplerian potential of the planet and of a rotating circular gravitational dipole potential due to the Sun movement around Solar system barycenter. We test the robustness of the symplectic Halley map by directly integrating Newton's equations over $\\sim 2.4\\cdot 10^4$ yr around Y2K and by reconstructing the Solar system kick function. Our results show that the Halley map with fixed parameters gives a reliable description of comet dynamics on time scales of $10^4$ yr while on a larger scales the parameters of the map are slowly changing due to slow oscillations of orbital momentum.

  11. Mapping Particle Charges in Battery Electrodes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn12electronEnergy Manufacturing EnergyMappingMapping

  12. Mapping Particle Charges in Battery Electrodes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated Codes |IsLove Your Home and It'llMapping Particle Charges in BatteryMapping

  13. Mapping the March to Methodical Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated Codes |IsLove Your Home and It'llMapping Particle Charges inMapping the

  14. Why Robots Need Maps Miroslaw Dynia1

    E-Print Network [OSTI]

    Schindelhauer, Christian

    to the constant factor bounds known so far. For the energy model (Sect. 4) we show the (4 - 2/k)- competitive alWhy Robots Need Maps Miroslaw Dynia1 , Jakub Lopusza´nski2 , and Christian Schindelhauer3 1 DFG number of edges traversed by a robot (the energy) we present an improved (4 - 2/k)-competitive online

  15. EXPERIMENTAL SIMULATION OF DISTILLATION COLUMN PROFILE MAPS

    E-Print Network [OSTI]

    Skogestad, Sigurd

    EXPERIMENTAL SIMULATION OF DISTILLATION COLUMN PROFILE MAPS Tshepo Sehole David Modise A thesis or in combination, such as distillation, extraction, crystallization, ect. Among these, distillation is by far profiles for the preliminary design of distillation columns. Residue curves and column profile are not only

  16. Road Map for Renewables Rangan Banerjee

    E-Print Network [OSTI]

    Banerjee, Rangan

    for Storage, Additional Cost #12;Renewable Energy Options Wind Solar Small Hydro Biomass Tidal Energy Wave Energy Ocean Thermal Energy Solar Thermal Solar Photovoltaic Geothermal* #12;World Primary EnergyRoad Map for Renewables Rangan Banerjee Energy Systems Engineering IIT Bombay Talk delivered

  17. Automorphisms mapping a point into a subvariety

    E-Print Network [OSTI]

    Poonen, Bjorn

    The problem of deciding, given a complex variety X, a point x \\in X, and a subvariety Z \\subseteq X, whether there is an automorphism of X mapping x into Z is proved undecidable. Along the way, we prove the undecidability ...

  18. A monotonicity conjecture for real cubic maps

    SciTech Connect (OSTI)

    Dawson, S.P. [Los Alamos National Lab., NM (United States); Galeeva, R. [Northwestern Univ., Evanston, IL (United States); Milnor, J. [State Univ. of New York, Stony Brook, NY (United States); Tresser, C. [International Business Machines Corp., Yorktown Heights, NY (United States)

    1993-12-01T23:59:59.000Z

    This will be an outline of work in progress. We study the conjecture that the topological entropy of a real cubic map depends ``monotonely`` on its parameters, in the sense that each locus of constant entropy in parameter space is a connected set. This material will be presented in more detail in a later paper.

  19. Particles, maps and Irreversible Thermodynamics { I

    E-Print Network [OSTI]

    Rondoni, Lamberto

    Particles, maps and Irreversible Thermodynamics { I E. G. D. Cohen The Rockefeller University New Thermodynamics from deterministic dynamics. We #12;nd that these models do not posses the crucial property of local thermodynamic equilibrium, since they rep- resent noninteracting particles systems. Hence

  20. Favourability Map of British Columbia Geothermal Resources

    E-Print Network [OSTI]

    Pedersen, Tom

    Favourability Map of British Columbia Geothermal Resources by Sarah Kimball A THESIS SUBMITTED carbon economy stipulates that power supply must be from renewable and low emission sources. Geothermal energy offers significant benefits to British Columbia which hosts Canadas best geothermal resources