Powered by Deep Web Technologies
Note: This page contains sample records for the topic "refereed designation unknown" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Appreciation to 2008 Referees  

Science Conference Proceedings (OSTI)

The Editorial Board would like to thank the following individuals who acted as referees for papers considered or published during the 2008 calendar year. Without their assistance, it would be impossible for INFORMS to publish a journal of high professional ...

2009-07-01T23:59:59.000Z

2

Recent Refereed Journal Articles  

NLE Websites -- All DOE Office Websites (Extended Search)

Recent Journal Articles Recent Journal Articles Recent Refereed Journal Articles Print Monday, 16 August 2010 17:38 General Information Refereed journal articles before 2010 will be posted in an archive. Articles may also be searched by beamline, author, journal, or year. View Journal Covers showcasing ALS science. All staff and users are reminded that when submitting any article based on work conducted in whole or in part at the ALS, must include the following acknowledgment statement: The Advanced Light Source is supported by the Director, Office of Science, Office of Basic Energy Sciences, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. Report Publications, Awards, Talks here . 2010 Refereed Publications Al-Khatatbeh, Y., Y. Lee, and B. Kiefer, "Phase relations and hardness trends of ZrO2 phases at high pressure ," Phys. Rev. B 81(21), 214102 (2010). 12.2.2

3

Cobalt and Sigma: Participant, Spectator, or Referee?  

Science Conference Proceedings (OSTI)

effect of cobalt is explained by its changing role from referee to participant. Messrs. Lund, Woulds, and Hockin are with Martin Metals Division,. Martin Marietta.

4

PUBLICATIONS, CONFERENCE PRESENTATIONS AND REPORTS Refereed Publications  

E-Print Network (OSTI)

PUBLICATIONS, CONFERENCE PRESENTATIONS AND REPORTS Refereed Publications 29. M.H. Alkhaldi, H. 46, 19-25. 22. Dholkawala, Z. F., Sarma, H.K., and Kam, S.I.: Application of Fractional Flow Theory Pressure When CO2 Is Diluted With Other Gases, SPE Reservoir Evaluation & Engineering, Volume 9, Number 4

Williams, John M.

5

unknown title  

E-Print Network (OSTI)

Experimental design and computer simulation of multi-effect humidification (MEH)-dehumidification solar distillation H.P. Garg a *, R.S. Adhikari b, Rakesh Kumar b

unknown authors

2002-01-01T23:59:59.000Z

6

unknown title  

E-Print Network (OSTI)

www.elsevier.com/locate/apthermeng Multi-period steam turbine network optimisation. Part I: Simulation based regression models and an evolutionary algorithm for finding D-optimal designs

Tor-martin Tveit; Carl-johan Fogelholm

2005-01-01T23:59:59.000Z

7

unknown title  

E-Print Network (OSTI)

Using measured data we demonstrate that there is an amazing correspondence among the statistical properties of spacings between parked cars and the distances between birds perching on a power line. We show that this observation is easily explained by the fact that birds and human use the same mechanism of distance estimation. We give a simple mathematical model of this phenomenon and prove its validity using measured data. Everyone knows that to park a car in the city center is problematic. The amount of the available places is limited and it has to be shared between too many interested parties. Birds face the same problem when a flock tries to perch on an electric line. The common problem (we will call it "the parking problem " in the following text) is to place oneself safely between the two parties limiting the available space from the left and from the right. This leads necessarily to an interaction preventing collisions between the participants and making the parking maneuver not random. It should be therefore not a surprise that the "Random car parking model " introduced by Renyi [1] (see also [2] and [3] for review) does not describe the real parking data correctly [4], [5]. The exact character of the interaction is unknown and hardly describable in the physical terms. It is however clear that it is primarily triggered by the brain and then mediated through the muscles (by pressing the accelerator/brake pedal (cars) or by flopping the wings (birds)). Though the particular locomotive activity is different the basic neural regulatory mechanisms can be similar in both cases. The complex interplay between the individuals

Petr Šeba

2009-01-01T23:59:59.000Z

8

unknown title  

E-Print Network (OSTI)

Developing and running Tcl scripts to control the Altera ® Quartus ® II software allows you to perform a wide range of functions, such as compiling a design or writing procedures to automate common tasks. You can use Tcl scripts to manage a Quartus II project, make assignments, define

Tcl Scripting

2010-01-01T23:59:59.000Z

9

unknown title  

E-Print Network (OSTI)

Developing and running Tcl scripts to control the Altera ® Quartus ® II software allows you to perform a wide range of functions, such as compiling a design or writing procedures to automate common tasks. You can use Tcl scripts to manage a Quartus II project, make assignments, define

Tcl Scripting

2012-01-01T23:59:59.000Z

10

unknown title  

E-Print Network (OSTI)

The individual actions that lead to maintenance incidents often reflect local conditions present in the workplace at the time of the action. Such conditions include: time pressure, fatigue, equipment deficiencies, teamwork, and group norms. Accurately identifying the nature of an error and the local conditions that prompted it is a critical step toward identifying how the system can be improved to prevent the problem from occurring again. Originally referred to as ‘defenses ’ by James Reason, risk controls are features put in place to manage hazards in the workplace. There are two main types of risk controls related to maintenance error – preventative risk controls and recovery risk controls. Preventative risk controls are intended to reduce the chance of unwanted events such as human error. Examples of preventative risk controls are training, task qualifications, or components designed to prevent incorrect installation. Recovery risk controls are designed to detect and recover from a dangerous situation once it has started to develop. Functional checks and duplicate inspections are examples of procedures designed to detect maintenance errors. Although maintenance occurrences usually involve errors made by technicians, investigations of aviation maintenance events also identify organizational-level factors such as: training and qualification systems; the allocation of resources; and the cultural or value systems that permeate the organization. Although they are unwanted events, errors are valuable opportunities to identify needed improvements and implement changes.

unknown authors

2009-01-01T23:59:59.000Z

11

unknown title  

E-Print Network (OSTI)

Section 3.11.4 in the RACM indicates that the maximum cooling capacity credit must be in combination with verified cooling coil airflow and sealed and tested ducts. Table RA2-1 of the Reference Residential Appendix RA2 indicates that the maximum cooling capacity credit must be in combination with verified cooling coil airflow, sealed and tested ducts and high EER. Which requirement is valid? I think the elimination of the refrigerant charge as an additional compliance requirement is a mistake. The original intent of the additional compliance requirements was to insure the installation quality of both the duct system and the air conditioning equipment. Eliminating the refrigerant charge relaxes the installation quality standard for the air conditioning equipment. The logic seems to be a high EER will substitute for an improperly functioning air conditioner. The higher EER will reduce the air conditioner demand at time of peak but it will not increase the reduced cooling capacity of an air conditioner with an improper refrigerant charge. 2. RACM Section 3.11.6: The requirement for duct design verification by the HERS rater has been eliminated from

Commissioner Jackalyne Pfannenstiel; Commissioner Arthur; H. Rosenfeld, Ph.D.

2008-01-01T23:59:59.000Z

12

Visualization of the Invisible, Explanation of the Unknown, Ruggedization of the Unstable: Sensitivity Analysis, Virtual Tryout and Robust Design through Systematic Stochastic Simulation  

SciTech Connect

In the past decade, sheet metal forming simulation became a well established tool to predict the formability of parts. In the automotive industry, this has enabled significant reduction in the cost and time for vehicle design and development, and has helped to improve the quality and performance of vehicle parts. However, production stoppages for troubleshooting and unplanned die maintenance, as well as production quality fluctuations continue to plague manufacturing cost and time. The focus therefore has shifted in recent times beyond mere feasibility to robustness of the product and process being engineered. Ensuring robustness is the next big challenge for the virtual tryout / simulation technology.We introduce new methods, based on systematic stochastic simulations, to visualize the behavior of the part during the whole forming process -- in simulation as well as in production. Sensitivity analysis explains the response of the part to changes in influencing parameters. Virtual tryout allows quick exploration of changed designs and conditions. Robust design and manufacturing guarantees quality and process capability for the production process. While conventional simulations helped to reduce development time and cost by ensuring feasible processes, robustness engineering tools have the potential for far greater cost and time savings.Through examples we illustrate how expected and unexpected behavior of deep drawing parts may be tracked down, identified and assigned to the influential parameters. With this knowledge, defects can be eliminated or springback can be compensated e.g.; the response of the part to uncontrollable noise can be predicted and minimized. The newly introduced methods enable more reliable and predictable stamping processes in general.

Zwickl, Titus; Carleer, Bart; Kubli, Waldemar [AutoForm Engineering GmbH, Technoparkstrasse 1, CH-8005 Zurich (Switzerland)

2005-08-05T23:59:59.000Z

13

Referee A  

NLE Websites -- All DOE Office Websites (Extended Search)

P69. "on the edges" changed to "at the end regions" Sentence starting "Symmetric field flip..." changed to explain zero dispersion at long absorber. P72. Sentence added on Magnet...

14

UNKNOWN  

Office of Legacy Management (LM)

DOI: 10.10071~00267-004-0126-6 DOI: 10.10071~00267-004-0126-6 Science, Policy, and Stakeholders: Developing a Consensus Science Plan for Amchitka Island, Aleutians, Alaska JOANNABURGER Division of Life Sciences Consortium for Risk Evaluation with Stakeholder Participation (CRESP) and Environmental and Occupational Health Sciences Institute (EOHSI) Rutgers University Piscataway, New Jersey 08854-8082, USA MICHAEL GOCHFELD CRESP and EOHSI UMDNJ-Robert Wood Johnson Medical School Piscataway, New Jersey 08854, USA DAVID S. KOSSON Department of Civil and Environmental Engineering CRESP and Vanderbilt University Nashville, Tennessee 37235, USA CHARLES W. POWERS BARRY FRIEDLANDER CRESP and EOHSI UMDNJ-Robert Wood Johnson Medical School Piscataway, New Jersey 08854, USA JOHN EICHELBERGER

15

UNKNOWN  

Office of Legacy Management (LM)

JOURNAL OF JOURNAL OF ENVIRONMENTAL Journal of ELSEVIER Environmental Radioactivity 60 (2002) 165-187 RADIOACTIVITY An assessment of the reported leakage of anthropogenic radionuclides from the underground nuclear test sites at Amchitka Island, Alaska, USA to the surface environment Douglas Dashera3*, Wayne ans son^, Stan Reada, Scott FalleS, Dennis Farmerc, Wes ~ f u r d ~ , John Kelleye, Robert patrickf " Aluska Department o f Etz~~ironmental Conservation, 610 Liniversitj Avenue, Fairbanks, AK 99709, U S A ~ a t ~ s o n Environmentul Research Sercice, Inc.,I902 Yew Street Rd., Bellingham, W A 98226, U S A ' U . S . Encironmental Protection Agency Radiation and Indoor Encironments National Laboratory, P.O. Box 98517, La.r P'egrrs, N V 89193, U S A d ~ o s Alatnos Nationnl Laboratorj, Clzemical Science and Technology, M

16

UNKNOWN  

Office of Legacy Management (LM)

(1) The contamination may be too great, (2) suitable or cost-effec- tive remediation technologies may not currently be available, (3) remediation may impose too great a risk...

17

SUBMARINE LEAD-ACID BATTERY PERFORMANCE To appear in the (refereed) proceedings of the Mathematics-in-Industry  

E-Print Network (OSTI)

SUBMARINE LEAD-ACID BATTERY PERFORMANCE To appear in the (refereed) proceedings of the Mathematics and Basil Benjamin2 The lead-acid batteries used to power conventional submarines while they are submerged to calculate state of charge and to predict the per- formance of these batteries. Three models are considered

McGuinness, Mark

18

Unknown input estimation for a class of nonlinear systems and its application to automotive engine controls  

Science Conference Proceedings (OSTI)

System unmodeled dynamics and uncertainties are common issues in the design of model based controllers and observers. One way to deal with this is to design an unknown input observer to estimate those unknown variables. However it is not feasible, if ...

Chia-Shang Liu; Pingan He

2009-06-01T23:59:59.000Z

19

Publications: Refereed Journal Publications  

E-Print Network (OSTI)

, John T. Morrison, Vladimir M. Ovchinnikov, Dustin Offermann, Linn Van Woerkom and Richard Freeman, John. Hawkes, C. Hernandez-Gomez, H. Habara, R. Heathcote, D.S. Hey, K. Highbarger, M.H. Key, R. Kodama, K. Clark, R.R. Freeman, S.Hawkes, C. Hernandez-Gomez, H. Habara, R. Heathcote, D.S. Hey, K. Highbarger, M

Krstic, Miroslav

20

A framework for environmental assessment of CO2 capture and storage...  

NLE Websites -- All DOE Office Websites (Extended Search)

Elsevier Volume 37 Start Page 540 Issue 1 Date Published 012012 Refereed Designation Unknown Google Scholar BibTex RIS RTF XML Alternate URL: http:eetd.lbl.govnode56541...

Note: This page contains sample records for the topic "refereed designation unknown" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Design  

NLE Websites -- All DOE Office Websites (Extended Search)

Design Design of a Multithreaded Barnes-Hut Algorithm for Multicore Clusters Technical Report Junchao Zhang and Babak Behzad Department of Computer Science, University of Illinois at Urbana-Champaign {jczhang, bbehza2}@illinois.edu Marc Snir Department of Computer Science, University of Illinois at Urbana-Champaign and MCS Division, Argonne National Laboratory snir@anl.gov Abstract We describe in this paper an implementation of the Barnes-Hut al- gorithm on multicore clusters. Based on a partitioned global ad- dress space (PGAS) library, the design integrates intranode mul- tithreading and internode one-sided communication, exemplifying a PGAS + X programming style. Within a node, the computation is decomposed into tasks (subtasks), and multitasking is used to hide network latency. We study the tradeoffs between locality in private caches and locality in shared caches

22

Property:Plants with Unknown Planned Capacity | Open Energy Information  

Open Energy Info (EERE)

Plants with Unknown Planned Capacity Plants with Unknown Planned Capacity Jump to: navigation, search Property Name Plants with Unknown Planned Capacity Property Type String Description Number of plants with unknown planned capacity per GEA Pages using the property "Plants with Unknown Planned Capacity" Showing 21 pages using this property. A Alaska Geothermal Region + 1 + C Cascades Geothermal Region + 2 + Central Nevada Seismic Zone Geothermal Region + 9 + G Gulf of California Rift Zone Geothermal Region + 4 + H Hawaii Geothermal Region + 0 + Holocene Magmatic Geothermal Region + 0 + I Idaho Batholith Geothermal Region + 1 + N Northern Basin and Range Geothermal Region + 11 + Northern Rockies Geothermal Region + 0 + Northwest Basin and Range Geothermal Region + 9 + R Rio Grande Rift Geothermal Region + 1 +

23

System for identifying known materials within a mixture of unknowns  

DOE Patents (OSTI)

One or both of two methods and systems are used to determine concentration of a known material in an unknown mixture on the basis of the measured interaction of electromagnetic waves upon the mixture. One technique is to utilize a multivariate analysis patch technique to develop a library of optimized patches of spectral signatures of known materials containing only those pixels most descriptive of the known materials by an evolutionary algorithm. Identity and concentration of the known materials within the unknown mixture is then determined by minimizing the residuals between the measurements from the library of optimized patches and the measurements from the same pixels from the unknown mixture. Another technique is to train a neural network by the genetic algorithm to determine the identity and concentration of known materials in the unknown mixture. The two techniques may be combined into an expert system providing cross checks for accuracy. 37 figs.

Wagner, J.S.

1999-07-20T23:59:59.000Z

24

Nonlinear adaptive control for bioreactors with unknown kinetics  

Science Conference Proceedings (OSTI)

We consider a control problem for a single bioreaction occurring in a continuous and well-mixed bioreactor, assuming that the bioreaction's kinetics is not represented by a validated model. We develop a nonlinear controller and prove the global asymptotic ... Keywords: Continuous bioprocesses, Nonlinear adaptive control, Unknown kinetics, Wastewater treatment

Ludovic Mailleret; Olivier Bernard; Jean-Philippe Steyer

2004-08-01T23:59:59.000Z

25

Online Pricing of Secondary Spectrum Access with Unknown Demand Function  

E-Print Network (OSTI)

-of-the-day arrival rate trends. The simulations showed that AMTP closely tracks the time-varying optimal price1 Online Pricing of Secondary Spectrum Access with Unknown Demand Function Huseyin Mutlu, Murat while SUs are admitted and priced according to current availability of excess spectrum. The average rate

Starobinski, David

26

Photometric Stereo with General, Unknown Lighting Ronen Basri  

E-Print Network (OSTI)

and distant from the object but otherwise unconstrained. Lighting in each image may be an unknown that are approximately Lambertian, and assume that lights are relatively distant and isotropic (no cast shadows or slide a preliminary assessment of them using controlled images. It is a subject of future work to explore these more

Jacobs, David

27

Host suppression and bioinformatics for sequence-based characterization of unknown pathogens.  

SciTech Connect

Bioweapons and emerging infectious diseases pose formidable and growing threats to our national security. Rapid advances in biotechnology and the increasing efficiency of global transportation networks virtually guarantee that the United States will face potentially devastating infectious disease outbreaks caused by novel ('unknown') pathogens either intentionally or accidentally introduced into the population. Unfortunately, our nation's biodefense and public health infrastructure is primarily designed to handle previously characterized ('known') pathogens. While modern DNA assays can identify known pathogens quickly, identifying unknown pathogens currently depends upon slow, classical microbiological methods of isolation and culture that can take weeks to produce actionable information. In many scenarios that delay would be costly, in terms of casualties and economic damage; indeed, it can mean the difference between a manageable public health incident and a full-blown epidemic. To close this gap in our nation's biodefense capability, we will develop, validate, and optimize a system to extract nucleic acids from unknown pathogens present in clinical samples drawn from infected patients. This system will extract nucleic acids from a clinical sample, amplify pathogen and specific host response nucleic acid sequences. These sequences will then be suitable for ultra-high-throughput sequencing (UHTS) carried out by a third party. The data generated from UHTS will then be processed through a new data assimilation and Bioinformatic analysis pipeline that will allow us to characterize an unknown pathogen in hours to days instead of weeks to months. Our methods will require no a priori knowledge of the pathogen, and no isolation or culturing; therefore it will circumvent many of the major roadblocks confronting a clinical microbiologist or virologist when presented with an unknown or engineered pathogen.

Branda, Steven S.; Lane, Todd W.; Misra, Milind; Meagher, Robert J.; Patel, Kamlesh D.; Kaiser, Julia N.

2009-11-01T23:59:59.000Z

28

Referee Files for 2013 RPP  

NLE Websites -- All DOE Office Websites (Extended Search)

(2013) Oct. 02, 2013 Dynamical Electroweak Symmetry Breaking (2013) Oct. 01, 2013 Higgs Boson H(0) (2013) Oct. 30, 2013 Lattice-QCD (2013) Oct. 01, 2013 Online Particle Physics...

29

The Impact of Rate Design and Net Metering on the Bill Savings from  

NLE Websites -- All DOE Office Websites (Extended Search)

The Impact of Rate Design and Net Metering on the Bill Savings from The Impact of Rate Design and Net Metering on the Bill Savings from Distributed PV for Residential Customers in California Title The Impact of Rate Design and Net Metering on the Bill Savings from Distributed PV for Residential Customers in California Publication Type Report Refereed Designation Unknown Year of Publication 2010 Authors Darghouth, Naïm, Galen L. Barbose, and Ryan H. Wiser Pagination 62 Date Published 04/2010 Publisher LBNL City Berkeley Keywords electricity markets and policy group, electricity rate design, energy analysis and environmental impacts department, net metering, photovoltaics Abstract Net metering has become a widespread policy in the U.S. for supporting distributed photovoltaics (PV) adoption.1 Though specific design details vary, net metering allows customers with PV to reduce their electric bills by offsetting their consumption with PV generation, independent of the timing of the generation relative to consumption - in effect, compensating the PV generation at retail electricity rates (Rose et al. 2009). Though net metering has played an important role in jump-starting the PV market in the U.S., challenges to net metering policies have emerged in a number of states and contexts, and alternative compensation methods are under consideration. Moreover, one inherent feature of net metering is that the value of the utility bill savings it provides to customers with PV depends heavily on the structure of the underlying retail electricity rate, as well as on the characteristics of the customer and PV system. Consequently, the bill-savings value of net metering - and the impact of moving to alternative compensation mechanisms - can vary substantially from one customer to the next. For these reasons, it is important for policymakers and others that seek to support the development of distributed PV to understand both how the bill savings benefits of PV varies under net metering, and how the bill savings under net metering compares to savings associated with other possible compensation mechanisms. To advance this understanding, we analyze the bill savings from PV for residential customers of California's two largest electric utilities, Pacific Gas and Electric (PG&E) and Southern California Edison (SCE).3 The analysis is based on hourly load data from a sample of 215 residential customers located in the service territories of the two utilities, matched with simulated hourly PV production for the same time period based on data from the nearest of 73 weather stations in the state. We focus on these two utilities, both because we had ready access to a sample of load data for their residential customers, and because their service territories are the largest markets for residential PV in the country.

30

Application of Categorical Exclusions (1021.410) Disagree Agree Unknown  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 1 Checklist for Categorical Exclusion Determination, revised Nov. 2011 Application of Categorical Exclusions (1021.410) Disagree Agree Unknown (b)(1) The proposal fits within a class of actions that is listed in appendix A or B to subpart D. X (b)(2) There are no extraordinary circumstances related to the proposal that may affect the significance of the environmental effects of the proposal, including, but not limited to, scientific controversy about the environmental effects of the proposal; uncertain effects or effects involving unique or unknown risks; and unresolved conflicts concerting alternate uses of available resources X (b)(3) The proposal has not been segmented to meet the definition of a categorical exclusion. Segmentation can occur when a proposal is

31

Success probabilities for universal unambiguous discriminators between unknown pure states  

E-Print Network (OSTI)

A universal programmable discriminator can perform the discrimination between two unknown states, and the optimal solution can be approached via the discrimination between the two averages over the uniformly distributed unknown input pure states, which has been widely discussed in previous works. In this paper, we consider the success probabilities of the optimal universal programmable unambiguous discriminators when applied to the pure input states. More precisely, the analytic results of the success probabilities are derived with the expressions of the optimal measurement operators for the universal discriminators and we find that the success probabilities have nothing to do with the dimension d while the amounts of the copies in the two program registers are equal. The success probability of programmable unambiguous discriminator can asymptoticly approach to that of usual unambiguous discrimination (state comparison) as the number of copies in program registers (data register) goes to infinity.

Tao Zhou

2013-08-03T23:59:59.000Z

32

Interferometric distillation and determination of unknown two-qubit entanglement  

Science Conference Proceedings (OSTI)

We propose a scheme for both distilling and quantifying entanglement, applicable to individual copies of an arbitrary unknown two-qubit state. It is realized in a usual two-qubit interferometry with local filtering. Proper filtering operation for the maximal distillation of the state is achieved by erasing single-qubit interference, and then the concurrence of the state is determined directly from the visibilities of two-qubit interference. We compare the scheme with full state tomography.

Lee, S.-S. B.; Sim, H.-S. [Department of Physics, Korea Advanced Institute of Science and Technology, Daejeon 305-701 (Korea, Republic of)

2009-05-15T23:59:59.000Z

33

Electrical Resistivity Imaging for Unknown Bridge Foundation Depth Determination  

E-Print Network (OSTI)

Unknown bridge foundations pose a significant safety risk due to stream scour and erosion. Records from older structures may be non-existent, incomplete, or incorrect. Nondestructive and inexpensive geophysical methods have been identified as suitable to investigate unknown bridge foundations. The objective of the present study is to apply advanced 2D electrical resistivity imaging (ERI) in order to identify depth of unknown bridge foundations. A survey procedure is carried out in mixed terrain water and land environments with rough topography. A conventional resistivity survey procedure is used with the electrodes installed on the stream banks. However, some electrodes must be adapted for underwater use. Tests were conducted in one laboratory experimentation and at five field experimentations located at three roadway bridges, a geotechnical test site, and a railway bridge. The first experimentation was at the bridges with the smallest foundations, later working up in size to larger drilled shafts and spread footings. Both known to unknown foundations were investigated. The geotechnical test site is used as an experimental site for 2D and 3D ERI. The data acquisition is carried out along 2D profile with a linear array in the dipole-dipole configuration. The data collections have been carried out using electrodes deployed directly across smaller foundations. Electrodes are deployed in proximity to larger foundations to image them from the side. The 2D ERI can detect the presence of a bridge foundation but is unable to resolve its precise shape and depth. Increasing the spatial extent of the foundation permits better image of its shape and depth. Using electrode < 1 m to detect a slender foundation < 1 m in diameter is not feasible. The 2D ERI method that has been widely used for land surface surveys presently can be adapted effectively in water-covered environments. The method is the most appropriate geophysical method for determination of unknown bridge foundations. Fully 3D ERI method at bridge sites is labor intensive, time consuming, and does not add enough value over 2D ERI to make it worthwhile.

Arjwech, Rungroj

2011-12-01T23:59:59.000Z

34

PHYLOGENOMICS - GUIDED VALIDATION OF FUNCTION FOR CONSERVED UNKNOWN GENES  

SciTech Connect

Identifying functions for all gene products in all sequenced organisms is a central challenge of the post-genomic era. However, at least 30-50% of the proteins encoded by any given genome are of unknown function, or wrongly or vaguely annotated. Many of these 'unknown' proteins are common to prokaryotes and plants. We accordingly set out to predict and experimentally test the functions of such proteins. Our approach to functional prediction is integrative, coupling the extensive post-genomic resources available for plants with comparative genomics based on hundreds of microbial genomes, and functional genomic datasets from model microorganisms. The early phase is computer-assisted; later phases incorporate intellectual input from expert plant and microbial biochemists. The approach thus bridges the gap between automated homology-based annotations and the classical gene discovery efforts of experimentalists, and is much more powerful than purely computational approaches to identifying gene-function associations. Among Arabidopsis genes, we focused on those (2,325 in total) that (i) are unique or belong to families with no more than three members, (ii) are conserved between plants and prokaryotes, and (iii) have unknown or poorly known functions. Computer-assisted selection of promising targets for deeper analysis was based on homology .. independent characteristics associated in the SEED database with the prokaryotic members of each family, specifically gene clustering and phyletic spread, as well as availability of functional genomics data, and publications that could link candidate families to general metabolic areas, or to specific functions. In-depth comparative genomic analysis was then performed for about 500 top candidate families, which connected ~55 of them to general areas of metabolism and led to specific functional predictions for a subset of ~25 more. Twenty predicted functions were experimentally tested in at least one prokaryotic organism via reverse genetics, metabolic profiling, functional complementation, and recombinant protein biochemistry. Our approach predicted and validated functions for 10 formerly uncharacterized protein families common to plants and prokaryotes; none of these functions had previously been correctly predicted by computational methods. The functions of five more are currently being validated. Experimental testing of diverse representatives of these families combined with in silica analysis allowed accurate projection of the annotations to hundreds more sequenced genomes.

V, DE CRECY-LAGARD; D, HANSON A

2012-01-03T23:59:59.000Z

35

Simulated NMIS Imaging Data for an Unknown Object  

SciTech Connect

This report presents simulated Nuclear Materials Identification System (NMIS) imaging data for an unclassified object, whose characteristics are initially unknown to the reader. This data will be used to test various analysis capabilities and was created with a simple deterministic ray-tracing algorithm. NMIS is a time-dependent coincidence counting system that is used to characterize both fissile and non-fissile materials undergoing nondestructive assay. NMIS characterizes materials by interrogating them with neutrons, either from an associated-particle deuterium-tritium (DT) neutron generator, which produces a time and directionally tagged monoenergetic beam of 14.1 MeV neutrons, or a time-tagged spontaneous fission source in an ionization chamber.

Walker, Mark E [ORNL; Mihalczo, John T [ORNL

2012-04-01T23:59:59.000Z

36

Remote implementation of partially unknown operations and its entanglement costs  

E-Print Network (OSTI)

We present the generalized version of Wang's protocol[A.M.Wang, Phys.Rev.A 74,032317 (2006)] for the remote implementation(sometimes referred to as quantum remote control) of partially unknown quantum operations. The protocol only requires no more than half of the entanglements used in Bidirectional Quantum State Teleportation. We also propose a protocol for another form of quantum remote control. It can remotely implement a unitary operation which is a combination of the projective representations of a group. Moreover, we prove that the Schmidt rank of the entanglements cannot not be less than the number of controlled parameters of the operations, which for the first time gives a lower bound on entanglement costs in remote implementation of quantum operations.

Shu-Hui Luo; An-Min Wang

2013-01-24T23:59:59.000Z

37

Modeling and simulation of HVAC faults in EnergyPlus  

NLE Websites -- All DOE Office Websites (Extended Search)

simulation of HVAC faults in EnergyPlus Title Modeling and simulation of HVAC faults in EnergyPlus Publication Type Conference Paper Refereed Designation Refereed Year of...

38

Microgrid Dispatch for Macrogrid Peak-Demand Mitigation  

NLE Websites -- All DOE Office Websites (Extended Search)

Dispatch for Macrogrid Peak-Demand Mitigation Title Microgrid Dispatch for Macrogrid Peak-Demand Mitigation Publication Type Conference Proceedings Refereed Designation Refereed...

39

Fish, Omega 3 and Human Health, 2nd EditionChapter 12 Maps and the Unknown  

Science Conference Proceedings (OSTI)

Fish, Omega 3 and Human Health, 2nd Edition Chapter 12 Maps and the Unknown Health Omega 3 eChapters Health - Nutrition - Biochemistry Nutrition Press Downloadable pdf of Chapter 12 Maps and the Unknown from the

40

This volume consists of the refereed papers presented at the Fourth International Conference on Logic Programming and NonMonotonic Reasoning (LP & NMR  

E-Print Network (OSTI)

Conference on Logic Programming and Non­Monotonic Reasoning (LP & NMR '97) held at Dagstuhl, Germany, in July of the Panel on Implementations (listed on page VII). LP & NMR '97 is the fourth meeting in a series. The three, and in Lexington, U.S.A., in June 1995. The LP & NMR conferences have been designed to promote inter

Dix, Juergen

Note: This page contains sample records for the topic "refereed designation unknown" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

This volume consists of the refereed papers presented at the Fourth International Conference on Logic Programming and NonMonotonic Reasoning (LP & NMR  

E-Print Network (OSTI)

Conference on Logic Programming and Non­Monotonic Reasoning (LP & NMR '97) held at Dagstuhl, Germany in July of the Panel on Implementations (listed on the next page). LP & NMR '97 is the fourth meeting in a series, and in Lexington, U.S.A. in June 1995. The LP & NMR conferences have been designed to promote inter

Dix, Juergen

42

2.3.3.2.1. General matrix solutions to calibration designs  

Science Conference Proceedings (OSTI)

... process at NIST. In this example, two NIST kilograms are compared with a customer's unknown kilogram. The design matrix ...

2012-03-31T23:59:59.000Z

43

Blind separation with unknown number of sources based on auto-trimmed neural network  

Science Conference Proceedings (OSTI)

This paper focuses on blind source separation with an unknown number of sources, which is the case generally assumed in most practical applications. Several over-determined neural algorithms (more sensors m than sources n) have been proposed to solve ... Keywords: Auto-trimmed neural network, Blind source separation (BSS), Unknown number of sources

Tsung-Ying Sun; Chan-Cheng Liu; Sheng-Ta Hsieh; Shang-Jeng Tsai

2008-06-01T23:59:59.000Z

44

Distributed model-invariant detection of unknown inputs in networked systems  

Science Conference Proceedings (OSTI)

This work considers hypothesis testing in networked systems under severe lack of prior knowledge. In previous work we derived a centralized Uniformly Most Powerful Invariant (UMPI) approach to testing unknown inputs in unknown Linear Time Invariant (LTI) ... Keywords: invariant testing, networked systems

James Weimer; Damiano Varagnolo; Karl Henrik Johansson

2013-04-01T23:59:59.000Z

45

Bi-parameter incremental unknowns ADI iterative methods for elliptic problems  

Science Conference Proceedings (OSTI)

Bi-parameter incremental unknowns (IU) alternating directional implicit (ADI) iterative methods are proposed for solving elliptic problems. Condition numbers of the coefficient matrices for these iterative schemes are carefully estimated. Theoretical ... Keywords: Bi-parameter ADI iterative method, Condition number, Convergence analysis, Incremental unknowns

Aili Yang; Yujiang Wu; Yongqing Wu; Dawei Ren

2012-07-01T23:59:59.000Z

46

unknown title  

E-Print Network (OSTI)

www.elsevier.com/locate/paid Mediation of the effects of the big five personality dimensions on negative mood and confirmed affective expectations by perceived situational stress: A quasi-field study of vacationers

Avi Besser A; Todd K. Shackelford B

2006-01-01T23:59:59.000Z

47

unknown title  

E-Print Network (OSTI)

A comparison of delayed radiobiological effects of depleted–uranium munitions versus fourth–generation nuclear weapons

André Gsponer; Jean-pierre Hurni; Bruno Vitale

2002-01-01T23:59:59.000Z

48

unknown title  

E-Print Network (OSTI)

A comprehensive detailed chemical kinetic reaction mechanism for combustion of n?alkane hydrocarbons from n?octane to n?hexadecane

Charles K. Westbrook A; William J. Pitz A; Olivier Herbinet A; Henry J. Curran A; Emma J. Silke A

2013-01-01T23:59:59.000Z

49

unknown title  

E-Print Network (OSTI)

This Newsletter is created by the National Energy Technology Laboratory and represents a summary of carbon sequestration news covering the past month. Readers are referred to the actual article(s) for complete information. It is produced by the National Energy Technology

unknown authors

2013-01-01T23:59:59.000Z

50

unknown title  

E-Print Network (OSTI)

By solving the right reflection equation proposed in reference[16] to describe the Z = 0 giant graviton branes, we obtain a boundary matrix with two free parameters for the AdS/CFT SU(1|1) spin chain.

Qingyong Lin; Guangliang Li; Yufei Huang

2009-01-01T23:59:59.000Z

51

unknown title  

E-Print Network (OSTI)

A re-evaluation of the role of killer whales Orcinus orca in a population decline of sea otters Enhydra lutris in the Aleutian Islands and a review of alternative hypothesesmam_156 1..22

unknown authors

2010-01-01T23:59:59.000Z

52

unknown title  

E-Print Network (OSTI)

www.elsevier.com/locate/jcp Neighbor list collision-driven molecular dynamics simulation for nonspherical hard particles. I. Algorithmic details

Ar Donev A; Salvatore Torquato A; Frank H. Stillinger C

2004-01-01T23:59:59.000Z

53

unknown title  

E-Print Network (OSTI)

Embeddings of the braid groups of covering spaces, classification of the finite subgroups of the braid groups of the real projective plane, and linearity of braid groups of low-genus surfaces

John Guaschi; Cep São; Paulo Sp Brazil

2009-01-01T23:59:59.000Z

54

unknown title  

E-Print Network (OSTI)

stream molecules. These include members of the JAK family of non-receptor kinases and a latent transcription factor, acute phase response factor or signal transducer and activator of transcription factor 3 (APRF/STAT 3) (9, 10). The gp130 signal transducer mediates biological effects exerted not only by IL-11, but also IL-6, oncostatin M (OSM), leukemia inhibitory factor (LIF), ciliary neurotrophic factor (CNTF), and cardiotrophin-1 (CT-1) (11, 12). Several lines of evidence suggest that IL-11 is an important osteotropic factor. IL-11 receptor transcripts are present in chondroblastic and osteoblastic progenitor cells during mouse embryogenesis (13). IL-11 itself is produced by human osteosarcoma SaOs-2 cells (14), and Girasole et al. (15) showed that IL-11 dose-dependently stimulated osteoclastlike multinucleated cell (OCL) formation in cocultures of

unknown authors

1996-01-01T23:59:59.000Z

55

unknown title  

E-Print Network (OSTI)

mstockstill on DSKH9S0YB1PROD with NOTICES Act applicable to registered entities. Further, the obligations, requirements and timetables prescribed in Commission rule 36.3(c)(4) governing core principle compliance by the IntercontinentalExchange, Inc., are not applicable to the NGPL TxOk Financial Basis contract with the issuance of this Order. This Order is based on the representations made to the Commission by the IntercontinentalExchange, Inc., dated

Billing Code P

2009-01-01T23:59:59.000Z

56

unknown title  

E-Print Network (OSTI)

doi:10.1093/molehr/gah205 Splice variants of the relaxin and INSL3 receptors reveal unanticipated molecular complexity

Marco Muda; Chaomei He; Paolo G. V. Martini; Tania Ferraro; Sharon Layfield; Deanne Taylor; Colette Chevrier; Rene Schweickhardt; Christie Kelton; Peter L. Ryan

2005-01-01T23:59:59.000Z

57

unknown title  

E-Print Network (OSTI)

The United States (U.S.) Department of Energy (DOE) proposes to transport highly enriched uranium (HEU) from Russia to a secure storage facility in Oak Ridge, TN. This proposed action would allow the United States and Russia to accelerate the disposition of excess nuclear weapons materials in the interest of promoting nuclear disarmament, strengthening nonproliferation, and combating terrorism. The HEU would be used for a non-weapons purpose in the U.S. – as fuel in research reactors performing solely peaceful missions. The amount of HEU to be transferred under the proposed action would be, on average, 166 kilograms (366 pounds) per year over a period of 10 years. The entire shipping campaign would be conducted under very high security. The Russian Federation would be responsible for packaging the material in appropriate packages that meet international and U.S. safety standards. The Russian Federation would also be responsible for transporting the material to a point of transfer, which could be in Russia or a cooperating European country. The U.S. would then take possession of the material and assume responsibility for its security and transport. The proposed action is to transport the HEU by U.S. military aircraft from Russia or a cooperating European country to the McGhee Tyson Air National Guard Base near Knoxville, TN, then by Safe Secure Transport/SafeGuards Transportation (SST/SGT) to the

unknown authors

2004-01-01T23:59:59.000Z

58

unknown title  

E-Print Network (OSTI)

cases of rubella were notified in five municipalities in Republika Srpska, Bosnia and Herzegovina. Eight cases were laboratoryconfirmed by positive IgM against rubella virus*. Four virus isolates were obtained and identified as genotype 2B strains, with one isolate differing by a single mutation in the region of the E1 gene. This ongoing outbreak revealed gaps in the immunisation programme during the war in BiH (1992-1995) and highlights the need to revise legislation to permit immunisation of children above 14 years of age with measles, mumps, rubella (MMR) vaccine and to introduce supplemental immunisation activities.

A Novo; Who Country Office For Bosnia

2009-01-01T23:59:59.000Z

59

unknown title  

E-Print Network (OSTI)

www.elsevier.com/locate/bbagen IpaD is localized at the tip of the Shigella flexneri type III secretion apparatus

Musa Sani A; Anne Botteaux; Claude Parsot; Egbert J. Boekema A; Abdelmounaaïm Allaoui

2006-01-01T23:59:59.000Z

60

unknown title  

E-Print Network (OSTI)

Key Words: India’s higher education sector, reforms in education, financing of India’s Education, Quality assurance in education, funding of higher education, regulating higher education The views expressed in the ICRIER Working Paper Series are those of the author and do not necessarily

Pawan Agarwal; Pawan Agarwal

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "refereed designation unknown" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

unknown title  

E-Print Network (OSTI)

Understanding temporal and spatial patterns of in-stream temperature can provide useful information to managing future impacts of climate change on these systems. This study will compare temporal patterns and spatial variability of headwater in-stream temperature in six catchments in the piedmont of North Carolina in two different geological regions, Carolina slate belt and Triassic basin. The NC Neuse River Buffer Rules were established in the 1990s to protect nutrient sensitive waters through maintaining and protecting existing buffers. These buffers can also moderate diurnal fluctuations and stream temperature maximums. In October 2007 six catchments ranging from 12 to 46 hectares (i.e., four on Hill Demonstration Forest and two on Umstead Research Farm) with perennial stream channels were outfitted with stream discharge, meteorological and water temperature monitoring equipment. There were similarities in winter and summer daily maximum stream temperature and mean diurnal fluctuations within the paired and larger watersheds. However, the winter and summer water temperature patterns varied significantly between geological regions. There were smaller ranges in summer diurnal fluctuations (e.g., 0.4 o C to 2.0 o C) compared to winter fluctuations (e.g., 0.3 o C to 4.7 o C) in all watersheds, suggesting that the trees along the riparian buffers are moderating the affects of air temperature on water temperature by reducing wide fluctuations in temperature. A regression model predicted that a 2 o C increase in daily maximum air temperature would increase daily maximum water temperature 0.6 o C to 1.0 o C in the winter and 0.2 o C to 0.8 o C in the summer between watersheds.

unknown authors

2009-01-01T23:59:59.000Z

62

unknown title  

E-Print Network (OSTI)

Neutral interstellar hydrogen in the inner heliosphere under influence of wavelength-dependent solar radiation pressure

S. Tarnopolski; M. Bzowski

2007-01-01T23:59:59.000Z

63

unknown title  

E-Print Network (OSTI)

Combustion chemical kinetics of biodiesel and related compounds (methyl and ethyl esters): Experiments and modeling – Advances and future refinements

Lucie Coniglio; Hayet Bennadji; Pierre Alex; Re Glaude; Olivier Herbinet; Francis Billaud

2013-01-01T23:59:59.000Z

64

unknown title  

E-Print Network (OSTI)

PPL Electric is a public utility company organized under the laws of the Commonwealth of Pennsylvania. It is a wholly owned subsidiary of PPL Corporation. PPL Electric owns transmission and distribution facilities located within PJM and currently serves approximately 1.4 million customers in 29 counties in eastern and central Pennsylvania. PPL Electric’s transmission system consists of approximately 5,000 miles of transmission lines and covers a service territory of approximately 10,000 square miles. PPL Electric is also the default supplier for retail customers within its service territory under Pennsylvania’s Electricity Generation Customer Choice and Competition Act, 66 Pa.C.S. § 2801, et seq. PPL Electric and its predecessors have been members of the PJM Regional Transmission Organization and its predecessor organizations since 1927. As such, PJM directs the operation of PPL Electric’s transmission facilities pursuant to the PJM Consolidated Transmission Owners Agreement. PJM provides transmission service over PPL Electric’s transmission facilities to customers under the PJM Tariff. PJM is divided into several different transmission zones and the annual transmission revenue requirement (“ATRR”) for each transmission zone is reflected in Attachment H of the PJM Tariff. The ATRR for each zone is used to establish rates for network and point-to-point transmission service within each zone and Transmission Enhancement Charges (“TECs”) pursuant to Schedules 12 and 12–Appendix of the PJM Tariff. PPL Electric currently recovers its transmission cost of service through a stated rate that is set forth in Schedules 7 and 8 and Attachment H-8 of the PJM Tariff, which establish, respectively, the point-to-point transmission rates for delivery to the PPL Group Zone 2 and the Network Integration Transmission Service (“NITS”) rates in the PPL Group Zone. PPL Electric shares the PPL Group Zone with UGI Utilities, Inc. (“UGI”), which recovers its ATRR through a formula rate, and Allegheny Electric Cooperative (“AEC”), which recovers its ATRR through a stated rate. 3 The rate for point-to-point service delivered to the PPL Group Zone or NITS within that zone is the sum of the individual rates for PPL Electric, UGI, and AEC. 4 PPL is not currently recovering TECs pursuant to Schedule 12 of the PJM Tariff.

Ms. Kimberly D. Bose; I. Background

2008-01-01T23:59:59.000Z

65

unknown title  

E-Print Network (OSTI)

On the spectrum of second order differential operators with complex coefficients B.M.Brown, D.K.R.M c Cormack Department of Computer Science,

M Plum

1998-01-01T23:59:59.000Z

66

unknown title  

E-Print Network (OSTI)

Frequency and time profiles of metric wave isolated type I solar noise storm bursts at high spectral and temporal resolution

G. A. Shanmugha Sundaram; K. R. Subramanian

2005-01-01T23:59:59.000Z

67

unknown title  

E-Print Network (OSTI)

Sharing knowledge, experiences, and innovations in public-private partnerships in infrastructure Expanding the frontiers of telecom markets through PPP in Peru Lessons for pro-poor initiatives

Robert Stephens Jorge Bossio

2006-01-01T23:59:59.000Z

68

unknown title  

E-Print Network (OSTI)

Influence of subunit structure on the oligomerization state of light harvesting complexes: a free energy calculation study

L. Janosi A; H. Keer B; I. Kosztin A; T. Ritz B

2005-01-01T23:59:59.000Z

69

unknown title  

E-Print Network (OSTI)

www.elsevier.com/locate/gene Heart-speci®c splice-variant of a human mitochondrial ribosomal protein (mRNA processing; tissue speci®c splicing)

unknown authors

2000-01-01T23:59:59.000Z

70

unknown title  

E-Print Network (OSTI)

Probing the environment in Gamma-ray bursts: the case of an X-ray precursor, afterglow late onset and wind vs constant density profile in GRB011121 and GRB011211

L. Piro; M. De Pasquale; P. Soffitta; D. Lazzati; L. Amati; E. Costa; M. Feroci; C. Guidorzi; E. Montanari; L. Nicastro

2004-01-01T23:59:59.000Z

71

unknown title  

E-Print Network (OSTI)

Relation between the hardness ratio and time in the first 2 seconds for compatible samples of short and long gamma-ray bursts ?

unknown authors

2005-01-01T23:59:59.000Z

72

unknown title  

E-Print Network (OSTI)

newsletter inside this issue: president’s welcome a not so silent underwater world norway’s seabed goes online! listening to fish fertilising the oceans with iron interview with the new ices general secretary developing science for fisheries management in a changing climate managing fisheries in marine protected areas understanding ‘essential fish habitat’ monitoring sea conditions with the help of lobster fishermen fishing for cephalopods bulletin boardICES CIEM Newsletter June 2006 “...it has been shown that the underwater background noise level on average doubled in intensity every six years in some parts of the oceans throughout the 1960s and ‘70s.” 2 President’s welcome A not so silent underwater world

unknown authors

2006-01-01T23:59:59.000Z

73

unknown title  

E-Print Network (OSTI)

A&A manuscript no. (will be inserted by hand later) Your thesaurus codes are: 03 (03.09.2; 03.19.2) Present and future gamma-ray burst experiments

K. Hurley

1998-01-01T23:59:59.000Z

74

unknown title  

E-Print Network (OSTI)

The Defense Nuclear Facilities Safety Board (Board) has conducted a series of reviews at Department of Energy (DOE) sites since 2008 to evaluate the implementation of Integrated Safety Management (ISM) at the activity level. The Board has transmitted reports detailing deficiencies and weaknesses in the implementation of activity-level ISM in several site-specific letters to the National Nuclear Security Administration (NNSA) and to the DOE Office of Environmental Management (EM). In your May 17, 2012, letter you reiterated DOE ' s commitment to complex-wide improvements in activity-level work planning and control and acknowledged the Energy Facility Contractors Group (EFCOG) effort to develop a work planning and control guideline document. The Board is encouraged by DOE's continued commitment and understands that DOE is currently evaluating the EFCOG document. The Board notes that DOE has recently solicited feedback from NNSA and EM site offices and headquarters organizations regarding this document. The Board has developed a detailed report, DNFSBffECH-37, Integrated Safety Management at the Activity Level: Work Planning and Control. This report is enclosed for

John E. Mansfield; Joseph F. Bader; The Honorable; Daniel B. Poneman

2012-01-01T23:59:59.000Z

75

unknown title  

E-Print Network (OSTI)

Ectodermal Wnt3/?-catenin signaling is required for the establishment and maintenance of the apical ectodermal ridge

Jeffery R. Barrow; Kirk R. Thomas; Oreda Boussadia-zahui; Robert Moore; Rolf Kemler; Mario R. Capecchi; Andrew P. Mcmahon

2002-01-01T23:59:59.000Z

76

unknown title  

E-Print Network (OSTI)

GLIS3, a novel member of the GLIS subfamily of KruÈ ppel-like zinc ®nger proteins with repressor and activation functions

Yong-sik Kim; Gen Nakanishi; Mark Lew; Anton M. Jetten

2003-01-01T23:59:59.000Z

77

unknown title  

E-Print Network (OSTI)

that Amendment No. 1 does not present a genuine issue as to whether public health and safety will be significantly affected. Therefore, the publication of a notice of proposed action and an opportunity for hearing or a notice of hearing is not warranted. Notice is hereby given of the right of interested persons to request a hearing on whether the action should be rescinded or modified. Further Information For further details with respect to this action, see the application dated March 5, 2008, and Amendment No. 1, which are available electronically, at NRC’s

unknown authors

2008-01-01T23:59:59.000Z

78

unknown title  

E-Print Network (OSTI)

To facilitate the review of the additional change in corporate structure and executive officers since NRC's acceptance (Reference 2) of our original request, Enclosure 1 reproduces our original NUREG-1556 license transfer information and detailed description for the affected document sections and indicates the small amount of new or changed text with revision bars in the right margin. The previously submitted Justification and Significance Determination are not affected by the corporate structure and personnel changes. Enclosure 2 provides a revised illustration of the new USEC corporate structure. USEC respectfully requests that the NRC accept the supplemental changes to our earlier request and consent to the transfers of control of licenses in accordance with 10 CFR 70.36, at NRC's earliest convenience. If you have any questions regarding this matter, please contact me at (301) 564-3470 or

Mr. Michael F. Weber; Darren E. Mays At; Peter Iner; J. Downs; Nrc Hq

2009-01-01T23:59:59.000Z

79

unknown title  

E-Print Network (OSTI)

Offshore wind farms are set to become a major part of our electricity supply in the UK. BWEA, the industry's representative body has, since the earliest discussions of the potential, been committed to ensuring that offshore wind farms are developed consistent with good environmental practice and that they win the support of local communities and other organisations. We believe that these goals can best be achieved by our industry working with communities, local authorities, Government agencies, NGOs, other stakeholder groups and all with an interest in the schemes. The Best Practice Guidelines: Consultation for Offshore Wind Energy Developments provide a useful tool for achieving these goals. We are particularly pleased that so many organisations have already agreed to put their names to this document. We trust that the guidelines will be used by everyone with an interest in a proposal. We are grateful to the dozens of organisations who have worked with us in preparing these guidelines and we'll be pleased to hear from you with your thoughts on how we can make this document even more useful as the industry grows and we learn more. By working together, we can ensure that offshore wind farms are developed with the highest level of participation, consultation and satisfaction.

Nick Goodall

2002-01-01T23:59:59.000Z

80

unknown title  

E-Print Network (OSTI)

to be well before the change in polarity of the solar polar magnetic fields. A list of the 80 flares used in this study is available from the authors. We obtained very similar results for the interval May 1967 to August 1972 and the interval

unknown authors

1977-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "refereed designation unknown" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

unknown title  

E-Print Network (OSTI)

This guidance document describes the development of composting emission factors for EPA’s Waste Reduction Model (WARM). Included are estimates of the net greenhouse gas (GHG) emissions from composting of yard trimmings and food scraps, as well as mixed organics and polylactide (PLA) biopolymer resin. 1 1. A SUMMARY OF THE GHG IMPLICATIONS OF COMPOSTING During composting, microbial decomposition aerobically transforms organic substrates into a stable, humus-like material (Brown and Subler, 2007). Although small-scale composting, such as backyard composting, occurs across the United States, WARM models composting only in central composting facilities with windrow piles because data for small-scale composting or other large-scale operations are insufficient. 2 WARM includes composting as a materials management option for yard trimmings, food scraps, and mixed organics. As modeled in WARM, composting results in some carbon storage (associated with application of compost to agricultural soils), as well as minimal carbon dioxide (CO 2) emissions from transportation and mechanical turning of the compost piles. To estimate the carbon storage from compost application, EPA selected point estimates from the range of emission factors covering various compost application

unknown authors

2012-01-01T23:59:59.000Z

82

unknown title  

E-Print Network (OSTI)

This article was published in an Elsevier journal. The attached copy is furnished to the author for non-commercial research and education use, including for instruction at the author’s institution, sharing with colleagues and providing to institution administration. Other uses, including reproduction and distribution, or selling or licensing copies, or posting to personal, institutional or third party websites are prohibited. In most cases authors are permitted to post their version of the article (e.g. in Word or Tex form) to their personal website or institutional repository. Authors requiring further information regarding Elsevier’s archiving and manuscript policies are encouraged to visit: http://www.elsevier.com/copyright Author's personal copy BIOLOGICAL CONSERVATION 140 (2007) 130 – 141 available at www.sciencedirect.com journal homepage: www.elsevier.com/locate/biocon Developing terrestrial, multi-taxon indices of biological integrity: An example from coastal sage scrub

Jay E. Diffendorfer A; Genie M. Fleming A; Jennifer M. Duggan A; Robert E. Chapman A; Matthew E. Rahn A; Milan J. Mitrovich A; Robert N. Fisher B

2007-01-01T23:59:59.000Z

83

unknown title  

E-Print Network (OSTI)

Summary. We present preliminary results concerning the search for short-period variable stars in Tucana and LGS3 based on very deep HST/ACS imaging. In the fraction of the observed field we studied in each galaxy, a total of 133 and 30 variables were found, respectively. For Tucana, we identified 76 of them as RR Lyrae (RRL) stars pulsating in the fundamental mode (RRab) and 32 in the first-overtone mode (RRc), as well as 2 anomalous Cepheids (AC). The mean period of the RRab and RRc is 0.59 and 0.35 days, respectively. In the case of LGS3, we found 24 RRab and 4 RRc, with mean periods 0.61 and 0.39 days, respectively, plus two candidate ACs. These values place both galaxies in the Oosterhoff gap. 1

E. J. Bernard; M. Monelli; C. Gallart; G. Bertelli; S. Cassisi; A. A. Cole; P. Demarque; A. E. Dolphin; H. C. Ferguson; S. Hidalgo; M. Mateo; L. Mayer; Navarro F. Pont

2007-01-01T23:59:59.000Z

84

unknown title  

E-Print Network (OSTI)

doi:10.1093/humrep/deh473 Association of estradiol levels on the day of hCG administration and pregnancy achievement in IVF: a systematic review

Ioannis P. Kosmas; Efstratios M. Kolibianakis; Paul Devroey

2004-01-01T23:59:59.000Z

85

unknown title  

E-Print Network (OSTI)

doi:10.1093/humrep/den216 FSHB promoter polymorphism within evolutionary conserved element is associated with serum FSH level in men

Marina Grigorova; Margus Punab; Kristo Ausmees; Maris Laan

2008-01-01T23:59:59.000Z

86

unknown title  

E-Print Network (OSTI)

doi:10.1093/humrep/deh795 Serum fluctuations of total and free tryptophan levels during the menstrual cycle are related to gonadotrophins and reflect brain serotonin utilization

N. Carretti; P. Florio; A. Bertolin; C. V. L. Costa; G. Allegri; G. Zilli

2005-01-01T23:59:59.000Z

87

unknown title  

E-Print Network (OSTI)

Foreign body granuloma in the anterior abdominal wall mimicking an acute appendicular lump and induced by a translocated copper-T intrauterine contraceptive device: a case report

Maulana Mohammed Ansari; Syed Hasan Harris; Shahla Haleem; Rehan Fareed; Mohammed Feroz Khan

2009-01-01T23:59:59.000Z

88

unknown title  

E-Print Network (OSTI)

This paper develops a life-cycle portfolio allocation model to address the effects of housing investment on the portfolio allocation of households. The model employs a comprehensive housing investment structure, Epstein-Zin recursive preferences and a stock market entry cost. Furthermore, rather than resorting to calibration we estimate the value of the relative risk aversion and elasticity of intertemporal substitution. The model shows that housing investment has a strong crowding out effect on investment in risky assets throughout the life-cycle and predicts that homeowners are, by and large, wealthier than renters and invest more in risky assets than renters. JEL classification: G0, G11, G12, D10

Denis Pelletier; Cengiz Tunc; We Thank John Seater

2013-01-01T23:59:59.000Z

89

unknown title  

E-Print Network (OSTI)

In Nuclear Physics numerous possibilities exist to investigate fundamental symmetries and interactions. In particular, the precise measurements of properties of fundamental fermions, searches for new interactions in ?-decays, and violations of discrete symmeties offer possibilities to search for physics beyond Standard Theory. Precise measurements of fundamental constants can be carried out. Low energy experiments allow to probe New Physics at mass scales far beyond the reach of present accelerators or such planned for the future and at which predicted new particles could be produced directly. 1. Fundamental Forces and Symmetries Symmetries play an important and crucial role in physics. Global symmetries give rise to conservation laws and local symmetries yield forces [ 1]. To date we know four fundamental interactions: (i) Electromagnetism, (ii) Weak Interactions, (iii) Strong Interactions, and (iv) Gravitation. These four forces are fundamental in the sense that all observed dynamical processes in physics can be traced back to one or a combination of them. Together with fundamental symmetries they from a framework on which all physical descriptions ultimately rest.

Klaus P. Jungmann A; Kernfysisch Versneller Instituut

2005-01-01T23:59:59.000Z

90

unknown title  

E-Print Network (OSTI)

Solar proton burning, photon and anti–neutrino disintegration of the deuteron in the relativistic field theory model of the deuteron

A. N. Ivanov; H. Oberhummer; N. I. Troitskaya; M. Faber

1998-01-01T23:59:59.000Z

91

unknown title  

E-Print Network (OSTI)

Abstract—A new “model-free ” control methodology is applied for the first time to power converters, and in particular to a buck converter, and to a ?uk converter. We evaluate its performances regarding load and supply variations. Our approach, which utilizes “intelligent ” PI controllers, does not require any converter identification while ensuring the stability and the robustness of the control synthesis. Simulation and experimental results show that, with a simple control structure, insensitivity to power supply fluctuations and to large load variations is ensured. Index Terms—dc/dc converters, buck converters, ?uk converters, model-free control, intelligent PI controllers, numerical differentiation.

Loïc Michel; Cédric Join; Michel Fliess; Pierre Sicard; Ahmed Chériti; Gréi Département; Génie Électrique; Génie Informatique

2010-01-01T23:59:59.000Z

92

unknown title  

E-Print Network (OSTI)

Indirect estimations and spatial variation in leaf area index of coniferous, deciduous and mixed forest stands in Forsmark

Torbern Tagesson; Svensk Kärnbränslehantering Ab; Laxemar; Torbern Tagesson

2006-01-01T23:59:59.000Z

93

unknown title  

E-Print Network (OSTI)

This article was published in an Elsevier journal. The attached copy is furnished to the author for non-commercial research and education use, including for instruction at the author’s institution, sharing with colleagues and providing to institution administration. Other uses, including reproduction and distribution, or selling or licensing copies, or posting to personal, institutional or third party websites are prohibited. In most cases authors are permitted to post their version of the article (e.g. in Word or Tex form) to their personal website or institutional repository. Authors requiring further information regarding Elsevier’s archiving and manuscript policies are encouraged to visit:

unknown authors

2007-01-01T23:59:59.000Z

94

unknown title  

E-Print Network (OSTI)

The effects of particle size, fermentation and roasting of cocoa nibs on supercritical fluid extraction of cocoa butter

unknown authors

2007-01-01T23:59:59.000Z

95

unknown title  

E-Print Network (OSTI)

From the beginning of the Middletown project the importance of determining the exact size and age distribution of the population was evident. Such information may not always be necessary in subsequent community-wide vaccination campaigns, but since one of our main objectives was to evaluate the degree of acceptance of oral vaccine in a typical small New England city, it was necessary to have accurate agespecific data. The 1960 United States census figures were not yet available; our estimates of the child population were therefore based on information obtained from birth records, from the schools, and from the Board of Education. NUMBER OF CHILDREN VACCINATED The school-aged population was determined by an exact count of the pupils in attendance at the 14 public and three parochial schools. Of the total 6,811, some 504 (chiefly those attending the two high schools and a technical school) were not Middletown residents, but were nevertheless considered eligible for vaccination. The preschool population was estimated on the basis of the number of

unknown authors

1962-01-01T23:59:59.000Z

96

unknown title  

E-Print Network (OSTI)

(DOI: will be inserted by hand later) A broadband leptonic model for gamma-ray emitting microquasars

V. Bosch-ramon; G. E. Romero; J. M. Paredes

2005-01-01T23:59:59.000Z

97

unknown title  

E-Print Network (OSTI)

managed by Martin Marietta Energy Systems, Inc. for the U.S. Department of Energy under Contract No. DE-AC05840R2 1400r

Harold Greene; W. C. (charlie Kuykendall

1992-01-01T23:59:59.000Z

98

unknown title  

E-Print Network (OSTI)

issue was published. See our lead story about changes in our publication schedule, necessitated by our other activities, primarily the CCC2 conference. This is the first MRB issue of 2008. ? The cover is a schematic of the fission theory for formation of planets and major moons. The left column is the sequence of events viewed in-plane, and the right column is the same sequence viewed from above. ? This is your final opportunity to sign-up for our international “Crisis in Cosmology – 2 ” (CCC2) conference from 2008 September 7-11 in Port Angeles, WA. Both participant and observer spaces remain available as of this writing, but may not remain so for very long. See

unknown authors

2008-01-01T23:59:59.000Z

99

unknown title  

E-Print Network (OSTI)

.. 1205 banner hill road " erwin, tn 37650 iII phone 423.743.9141 aII www.nudearfuelservkescom www.nudearluelservices.com

Mr. Luis; A. Reyes; Regional Administrator

2010-01-01T23:59:59.000Z

100

unknown title  

E-Print Network (OSTI)

www.fuelfirst.com Pyrolysis of energy crops including alfalfa stems, reed canarygrass, and eastern gamagrass q

A. A. Boateng A; H. G. Jung B; P. R. Adler C

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "refereed designation unknown" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

unknown title  

E-Print Network (OSTI)

Hellholes ® “What I call the ‘magic jurisdiction, ’ [is] where the judiciary is elected with verdict money. The trial lawyers have established relationships with the judges that are elected; they’re State Court judges; they’re popul[ists]. They’ve got large populations of voters who are in on the deal, they’re getting their [piece] in many cases. And so, it’s a political force in their jurisdiction, and it’s almost impossible to get a fair trial if you’re a defendant in some of these places. The plaintiff lawyer walks in there and writes the number on the blackboard, and the first juror meets the last one coming out the door with that amount of money.... These cases are not won in the courtroom. They’re won on the back roads long before the case goes to trial. Any lawyer fresh out of law school can walk in there and win the case, so it doesn’t matter what the evidence or law is. ” 1 —Richard “Dickie ” Scruggs, legendary Mississippi trial lawyer who built an empire of influence suing tobacco companies, HMOs and asbestos-related companies, but who has since been disbarred and sentenced to federal prison after pleading guilty to conspiracy in an attempt to bribe a judge. “West Virginia was a ‘field of dreams ’ for plaintiffs ’ lawyers. We built it and

unknown authors

2010-01-01T23:59:59.000Z

102

unknown title  

E-Print Network (OSTI)

Original article Niche overlap and diet breadth in bumblebees; are rare species more specialized in their choice of flowers?

Dave Goulson; Ben Darvill

2003-01-01T23:59:59.000Z

103

unknown title  

E-Print Network (OSTI)

External morphology and ultra-structure of eggs and first instar of Prepona laertes laertes (Hübner, [1811]), with notes on host plant use and taxonomy

Dias Et Al; O M S Dias A; Mirna M Casagr; Olaf H H Mielke C

2010-01-01T23:59:59.000Z

104

unknown title  

E-Print Network (OSTI)

Almuth Ernsting assesses the current social and environmental impacts of large-scale biofuel production and questions whether ‘sustainability standards ’ will be enough to prevent serious problems. Few people now doubt that some of the biofuels used in Europe are produced at the expense of rainforests and other biodiverse ecosystems and that those should not be promoted as ‘green energy’. Nobody would choose to buy biodiesel made from Colombian palm oil grown on illegal plantations owned by companies linked to paramilitaries which have killed, evicted and tortured local people to grab their land. Governments and international organisations are therefore keen to develop ‘sustainability standards’. In Europe, various countries including the UK are planning ‘reporting requirements ’ on environmental and social sustainability. The European Commission has proposed environmental standards, though they do not include human rights and food security. Can sustainability guarantees work and ensure that biofuels will contribute to climate change mitigation and socially just development? Scepticism has come from many grassroots organisations, non-governmental organisations (NGOs) and even a report published by the Organisation for Economic Co-operation and Development

unknown authors

2008-01-01T23:59:59.000Z

105

unknown title  

E-Print Network (OSTI)

period is herewith presented to your attention.The Annual Report in the Congress year differs from other years because of the change of Technical Commission Presidents.

unknown authors

2005-01-01T23:59:59.000Z

106

unknown title  

E-Print Network (OSTI)

organized and driven by a point of view. As one political scientist writes, "The study of politics is itself a political act containing little that is neutral. " Or natural! If you agree with that claim, then the next step is to figure out how much confidence one should have in any political research. By placing theoretically guided empirical tradition in its developmental and historical context, this

unknown authors

2002-01-01T23:59:59.000Z

107

unknown title  

E-Print Network (OSTI)

A novel mutation (T61I) in the gene encoding tumour necrosis factor receptor superfamily 1A (TNFRSF1A) in a Japanese patient with tumour necrosis factor receptor-associated periodic syndrome (TRAPS) associated with systemic lupus erythematosus

H. Ida; E. Kawasaki; T. Miyashita; F. Tanaka; M. Kamachi; Y. Izumi; M. Huang; M. Tamai; T. Origuchi; A. Kawakami; K. Migita; M. Motomura; T. Yoshimura; K. Eguchi

2004-01-01T23:59:59.000Z

108

unknown title  

E-Print Network (OSTI)

www.elsevier.com/locate/ijadhadh Anisotropic conductive films (ACFs) for ultra-fine pitch Chip-On-Glass (COG) applications

Myung Jin Yim; Jinsang Hwang; Kyung Wook Paik

2006-01-01T23:59:59.000Z

109

unknown title  

E-Print Network (OSTI)

doi:10.1093/heapol/czq009 Direct facility funding as a response to user fee reduction: implementation and perceived impact among Kenyan health centres and dispensaries

Antony Opwora; Margaret Kabare; Sassy Molyneux; Catherine Goodman

2009-01-01T23:59:59.000Z

110

unknown title  

E-Print Network (OSTI)

Polymer diodes require cathodes that do not corrode the polymer but do have low work function to minimize the electron injection barrier. First-principles calculations demonstrate that the work function of the (1000) surface of the compound Ca2N is half an eV lower than that of the elemental metal Ca (2.35 vs. 2.87 eV). Moreover its reactivity is expected to be smaller. This makes Ca2N an interesting candidate to replace calcium as cathode material for polymer light emitting diode devices. [PACS: 73.30 +y] 1 One of the great challenges for polymer light emitting diodes is the electron injection barrier as well as the performance degradation caused by chemical reactions of the cathode with the polymer. 1 State-of-the-art devices 2 use PPV (poly phenylene vinylene) as electro luminescence material. Often the cathode is made out of calcium, because of its low work function (2.87 eV) 3 and the presumed alignment of its Fermi level with the lowest unoccupied molecular orbital of PPV (electron affinity 2.73-2.8 eV). 4,5 Biases actually used are much higher than the optical band gap of PPV (2.4 eV) 6 namely in the order of 10 V, 1 which

unknown authors

2004-01-01T23:59:59.000Z

111

unknown title  

E-Print Network (OSTI)

These notes will cover the numerical solution of initial value problems (IVPs) and boundary value problems (BVPs) for ordinary differential equations (ODEs) and ordinary differential-algebraic equations (DAEs). We’ll review the basic problems of the subject and the minimum existence theory necessary to make numerical methods worthwhile. Then we’ll treat the construction, analysis and selection of numerical methods for IVPs and BVPs. We will also learn to use and build software packages which implement effective methods for IVPs and BVPs. Notes will be available from the URL

unknown authors

2008-01-01T23:59:59.000Z

112

unknown title  

E-Print Network (OSTI)

doi:10.1093/nar/gkj510 En masse nascent transcription analysis to elucidate regulatory transcription factors

Jinshui Fan; Ming Zhan; Jikui Shen; Jennifer L. Martindale; Xiaoling Yang; Tomoko Kawai; Myriam Gorospe

2005-01-01T23:59:59.000Z

113

unknown title  

E-Print Network (OSTI)

www.elsevier.com/locate/jsbmb Glucocorticoid mediated transcriptional repression of c-myc in apoptotic human leukemic CEM cells

Feng Zhou; Rheem D. Medh; E. Brad Thompson

1999-01-01T23:59:59.000Z

114

unknown title  

E-Print Network (OSTI)

nergy efficiency is a low-cost way to save money, E support job growth, reduce pollution, and improve the competitiveness of our businesses. We spend more than $400 billion each year to power our homes and commercial buildings. These buildings consume more than 70 percent of all electricity used in the United States—about 40 percent of our nation’s total energy bill—and contribute to almost 40 percent of the nation’s carbon dioxide emissions. Through the National Laboratories and a vast network of research and expert partners, the U.S. Department of Energy’s (DOE) Office of Energy Efficiency and Renewable Energy/Building Technologies Program works to continually develop innovative, cost-effective energy-saving solutions— better technologies, better building practices, and better ways to improve existing buildings in which we work, shop,

Arah Schuur

2012-01-01T23:59:59.000Z

115

unknown title  

E-Print Network (OSTI)

This article was published in an Elsevier journal. The attached copy is furnished to the author for non-commercial research and education use, including for instruction at the author’s institution, sharing with colleagues and providing to institution administration. Other uses, including reproduction and distribution, or selling or licensing copies, or posting to personal, institutional or third party websites are prohibited. In most cases authors are permitted to post their version of the article (e.g. in Word or Tex form) to their personal website or institutional repository. Authors requiring further information regarding Elsevier’s archiving and manuscript policies are encouraged to visit: http://www.elsevier.com/copyright Author's personal copy Available online at www.sciencedirect.com

Lars Håkanson A; Andreas C. Bryhn; Jenny M. Eklund

2006-01-01T23:59:59.000Z

116

unknown title  

E-Print Network (OSTI)

Multi-scale visualization and characterization of lignocellulosic plant cell wall deconstruction during thermochemical pretreatment†‡

unknown authors

2010-01-01T23:59:59.000Z

117

unknown title  

E-Print Network (OSTI)

The current issue and full text archive of this journal is available at www.emeraldinsight.com/1756-8692.htm

Frances C. Moore; Michael C. Maccracken

2008-01-01T23:59:59.000Z

118

unknown title  

E-Print Network (OSTI)

Heat dissipation sensors of variable length for the measurement of sap flow in trees with deep sapwood

Shelley A. James; Michael J. Clearwater; Frederick C. Meinzer; Guillermo Goldstein

2001-01-01T23:59:59.000Z

119

unknown title  

E-Print Network (OSTI)

Quinolonas y naftiridinas son conocidas como núcleo base de distintas series de compuestos con actividad terapéutica, como antibióticos, anti-inflamatorios y analgésicos. El estudio de las interacciones intramoleculares, como así también las interacciones con el medio en que se encuentran disueltos son importantes para posteriores predicciones en relaciones cuantitativas de estructura-actividad (QSAR). Se realizaron estudios de efecto de solvente en espectroscopía UV/vis a los siguientes compuestos

Detección E Identificación De; Interacciones Inter E; Intramoleculares En; Una Serie De; Juana Silber; Liliana Giacomelli; Y Rosa Cattana

2006-01-01T23:59:59.000Z

120

unknown title  

E-Print Network (OSTI)

This review presents a brief discussion of the theory of Cold Dark Matter of structure formation in the universe, describing the main processes determining the power spectrum, the non-linear gravitational collapse, the formation of galaxies and the evolution of the intergalactic medium. Recent advances in the observations of high redshift galaxies, and their interpretation in the context of this theory, are then summarized. Este artículo de revisión presenta una breve exposición de la teoría de la Materia Invisible Fría de la formación de estructura en el universo, describiendo los procesos más importantes que determinan el espectro de potencia, el colapso gravitatorio no lineal, la formación de galaxias y la evolución del medio intergaláctico. Resumimos también avances recientes en las observaciones de galaxias a alto corrimiento al rojo, y la interpretación en el contexto de esa teoría. Subject headings: 1. Introducción

Jordi Miralda Escudé; Alfred P. Sloan Fellow

1999-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "refereed designation unknown" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

unknown title  

E-Print Network (OSTI)

Limitations to the superposition principle: Superselection rules in non-relativistic quantum mechanics

C Cisneros; R P Martínez-y-romero; H N Núñez-yépez; A L Salas-brito

1998-01-01T23:59:59.000Z

122

unknown title  

E-Print Network (OSTI)

million gallons of ethanol production capacity is in service in Oregon, that after 90 days or a schedule determined through rulemaking, all gasoline sold in the state must contain 10 % volume of ethanol. The eastern side of the state will be the last to be phased into ethanol blend on 16 September 2008. In addition, HB2210 requires that all diesel fuel (except marine, locomotive and heating oil) must contain 2 % volume of biodiesel, once 5 million gallons per year capacity is in service for 3 months using Pacific Northwest feedstocks. Substantive misinformation is available to Oregonians regarding the impacts and benefits of this policy. The following addresses some of the areas of concern regarding corn based ethanol. Influence of Gasoline and Ethanol Cost and Price on the Economy Americans spent some $312 billion on about 160 billion gallons of gasoline in 2006. In 2007 they spent $526 billion for roughly the same amount of gasoline use. The forecast is for some 155 billion gallons of gasoline demand in 2008 with an annualized average cost of $3.89 per gallon for a sum of $602 billion

unknown authors

2008-01-01T23:59:59.000Z

123

unknown title  

E-Print Network (OSTI)

Graphene coating makes carbon nanotube aerogels superelastic and resistant to fatigue Kyu Hun Kim, Youngseok Oh and M. F. Islam* Lightweight materials that are both highly compressible and resilient under large cyclic strains can be used in a variety of applications 1–8. Carbon nanotubes offer a combination of elasticity, mechanical resilience and low density 9, and these properties have been exploited in nanotube-based foams 10–14 and aerogels 15,16. However, all nanotube-based foams and aerogels developed so far undergo structural collapse 15 or significant plastic deformation with a reduction in compressive strength 10,11,13,14 when they are subjected to cyclic strain. Here, we show that an inelastic aerogel made of single-walled carbon nanotubes can be transformed into a superelastic material by coating it with between one and five layers of graphene nanoplates. The

unknown authors

2012-01-01T23:59:59.000Z

124

unknown title  

E-Print Network (OSTI)

Elaboration and characterizations of platinum nanoparticles supported on cellulose-based carbon aerogel

Mines Paristech; Centre Mise; Forme Matériaux Cemef

2010-01-01T23:59:59.000Z

125

unknown title  

E-Print Network (OSTI)

We revisit the capability of the WR winds to eject these radionuclides using new models of single nonexploding WR stars with metallicity Z = 0.02. The earlier predictions for non-rotating WR stars are updated, and models for rotating such stars are used for the first time in this context. We find that (1) rotation has no significant influence on the short-lived radionuclide production by neutron capture during the core He-burning phase, and (2) 26 Al, 36 Cl, 41 Ca, and 107 Pd can be wind-ejected by a variety of WR stars at relative levels that are compatible with the meteoritic analyses for a period of free decay of around 10 5 y between production and incorporation into the forming solar system solid bodies. We confirm the previously published conclusions that the winds of WR stars have a radionuclide composition that can meet the necessary condition for them to be a possible contaminating agent of the forming solar system. Still, it remains to be demonstrated from detailed models that this is a sufficient condition for these winds to have provided a level of pollution that is compatible with the observations.

M. Arnould; S. Goriely; G. Meynet

2006-01-01T23:59:59.000Z

126

unknown title  

E-Print Network (OSTI)

doi:10.1093/humrep/dei140 Chemokine expression is dysregulated in the endometrium of women using progestin-only contraceptives and correlates to elevated recruitment of distinct leukocyte populations

Rebecca L. Jones; Naomi B. Morison; Natalie J. Hannan; Hilary O. D. Critchley; Lois A. Salamonsen

2005-01-01T23:59:59.000Z

127

unknown title  

E-Print Network (OSTI)

This chapter presents an overview of landfilling as a waste management strategy in relation to the development of material-specific emission factors for EPA’s Waste Reduction Model (WARM). Estimates of the net greenhouse gas (GHG) emissions from landfilling most of the materials considered in WARM and several categories of mixed waste streams (e.g., mixed paper, mixed recyclables and mixed municipal solid waste (MSW)) are included in the chapter. 1. A SUMMARY OF THE GHG IMPLICATIONS OF LANDFILLING When food scraps, yard trimmings, paper and wood are landfilled, anaerobic bacteria degrade the materials, producing methane (CH4) and carbon dioxide (CO2). CH4 is counted as an anthropogenic GHG because, even if it is derived from sustainably harvested biogenic sources, degradation would not result in CH4 emissions if not for deposition in landfills. The CO 2 is not counted as a GHG because is it considered part of the natural carbon cycle of growth and decomposition; for more information, see the text box on biogenic carbon in the Introduction & Background chapter. The other materials in WARM either do not contain carbon or do not biodegrade measurably in anaerobic conditions, and therefore do not generate any CH4. In addition to carbon emissions, some of the carbon in these materials (i.e., food scraps, yard

unknown authors

2012-01-01T23:59:59.000Z

128

unknown title  

E-Print Network (OSTI)

Carbon capture and storage technologies in the European power market We examine the potential of Carbon Capture and Storage (CCS) technologies in the European electricity markets, assessing whether CCS technologies will reduce carbon emissions substantially in the absence of investment subsidies, and how the availability of CCS technologies may affect electricity prices and the amount of renewable electricity. To this end we augment a multi-market equilibrium model of the European energy markets with CCS electricity technologies. The CCS technologies are characterized by costs and technical efficiencies synthesized from a number of recent cost estimates and CCS technology reviews. Our simulations indicate that with realistic values for carbon prices, new CCS coal power plants become profitable, totally replacing non-CCS coal power investments and to a large extent replacing new wind power. New CCS gas power also becomes profitable, but does not replace non-CCS gas power fully. Substantially lower CCS costs, through subsidies on technological development or deployment, would be necessary to make CCS modification of old coal and gas power plants profitable.

Rolf Golombek; Mads Greaker; Sverre A. C; Ole Røgeberg; Finn Roar

2009-01-01T23:59:59.000Z

129

unknown title  

E-Print Network (OSTI)

A human skin multifunctional O-acyltransferase that catalyzes the synthesis of acylglycerols, waxes, and retinyl esters

Chi-liang Eric Yen; Charles H. Brown Iv; Mara Monetti; Robert V. Farese

2005-01-01T23:59:59.000Z

130

unknown title  

E-Print Network (OSTI)

Unconstrained mining of transcript data reveals increased alternative splicing complexity in the human transcriptome

I. G. Mollet; Claudia Ben-dov; Daniel Felício-silva; A. R. Grosso; Pedro Eleutério; Ruben Alves; Ray Staller; Tito Santos Silva; Maria Carmo-fonseca

2009-01-01T23:59:59.000Z

131

unknown title  

E-Print Network (OSTI)

Oculopharyngeal muscular dystrophy-like nuclear inclusions are present in normal magnocellular neurosecretory neurons of the hypothalamus

Maria T. Berciano; Nuria T. Villagra; Jose L. Ojeda; Joaquin Navascues; Anita Gomes; Miguel Lafarga; Maria Carmo-fonseca

2003-01-01T23:59:59.000Z

132

unknown title  

E-Print Network (OSTI)

Optimizing root system architecture in biofuel crops for sustainable energy production and soil carbon sequestration

Jennifer Pc To; Jinming Zhu; Philip N Benfey; Tedd Elich

2010-01-01T23:59:59.000Z

133

unknown title  

E-Print Network (OSTI)

A review of research on forest-related environmental markets (including certification schemes, bioenergy, carbon markets and other ecosystem services)

P. Dargusch; T. N. Maraseni; P. Schmidt

2010-01-01T23:59:59.000Z

134

unknown title  

E-Print Network (OSTI)

A stochastic model for the semiclassical collective dynamics of charged beams in particle accelerators 1

Nicola Cufaro Petroni; Salvatore De Martino; Silvio De Siena; Fabrizio Illuminati

1998-01-01T23:59:59.000Z

135

unknown title  

E-Print Network (OSTI)

Continuous variable tangle, monogamy inequality, and entanglement sharing in Gaussian states of continuous variable systems

Gerardo Adesso; Fabrizio Illuminati

2006-01-01T23:59:59.000Z

136

unknown title  

E-Print Network (OSTI)

Inference of Planck action constant by a classical fluctuative postulate holding for stable microscopic and macroscopic dynamical systems

Salvatore De Martino A; Silvio De Siena A; Fabrizio Illuminati A

1998-01-01T23:59:59.000Z

137

unknown title  

E-Print Network (OSTI)

asympTest: an R package for performing parametric statistical tests and confidence intervals based on the central limit theorem

J. -f. Coeurjolly; R. Drouilhet; P. Lafaye De Micheaux; J. -f. Robineau

2009-01-01T23:59:59.000Z

138

Vision-based guidance and control of a hovering vehicle in unknown environments  

E-Print Network (OSTI)

This thesis presents a methodology, architecture, hardware implementation, and results of a system capable of controlling and guiding a hovering vehicle in unknown environments, emphasizing cluttered indoor spaces. Six-axis ...

Ahrens, Spencer Greg

2008-01-01T23:59:59.000Z

139

Refereed journal publications (& papers in press) - CECM  

E-Print Network (OSTI)

Theory. 114 (2002), 57-69. [CECM Preprint 00:157]. 26. J. M. Borwein, John .... for computed tomography," (Nuclear Science Symposium and Medical Imaging ..... J.M. Borwein, D. Borwein, R. Shail and I.J. Zucker, ``Energy of static electron ...

140

Refereed or invited conference proceedings, chapters & notices  

E-Print Network (OSTI)

IFETS Journal of Educational Technology and Society (JETS), 2003. 2. ... the web ,'' Sigsam Bulletin: Communications in Computer Algebra, 32, March 1998, pp.

Note: This page contains sample records for the topic "refereed designation unknown" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

COLA REFEREED PUBLICATIONS 2011 UPDATED December 2012  

E-Print Network (OSTI)

. Chang, E.-C., S.-W. Yeh, S.-Y. Hong, and R. Wu, 2011: The role of air, 2011: Observed and simulated water and energy budget components at SCAN sites assimilation on simulation of the water cycle. J. Hydrometeor., 12, 147­156. 12. Feng

142

An autonomous hybrid robot system to navigate through unknown maze environments  

Science Conference Proceedings (OSTI)

This paper describes a fully complete autonomous hybrid robot system, named YAM (Yet Another Mouse), that is able to navigate through an unknown maze environment. YAM effectively tackles the problem of how to represent the environment using its sensor ... Keywords: intelligent agents, knowledge representation, path planning, robot competitions

Pedro Ribeiro

2007-08-01T23:59:59.000Z

143

Boosting-based ensemble learning with penalty setting profiles for automatic Thai unknown word recognition  

Science Conference Proceedings (OSTI)

A boosting-based ensemble learning can be used to improve classification accuracy by using multiple classification models constructing to cope with errors obtained from preceding steps. This paper presents an application of the boosting-based ensemble ... Keywords: boosting technique, data mining, ensemble learning, unknown word recognition, word boundary detection

Jakkrit TeCho; Cholwich Nattee; Thanaruk Theeramunkong

2010-11-01T23:59:59.000Z

144

Brief paper: Suboptimal control of linear stochastic multivariable systems with unknown parameters  

Science Conference Proceedings (OSTI)

An algorithm is proposed for suboptimal control of linear multivariable systems with unknown parameters and output noise covariances. This algorithm is based on the idea of explicitly separating the functions of identification, estimation and control. ... Keywords: Kalman filters, Multivariable control systems, canonical forms, controllability, discrete time systems, observability, parameter estimation, state estimation, state space methods, stochastic control

H. El-Sherief; N. K. Sinha

1982-01-01T23:59:59.000Z

145

Robust 3D Face Tracking on Unknown Users with Dynamical Active Models  

Science Conference Proceedings (OSTI)

The Active Appearance Models [1] and the derived Active Models (AM) [4] allow to robustly track the face of a single user that was previously learnt, but works poorly with multiple or unknown users. Our research aims at improving the tracking robustness ... Keywords: Active Appearance Models, Face Animation, Face Tracking, Virtual Reality

Dianle Zhou; Patrick Horain

2009-01-01T23:59:59.000Z

146

Designing a more nonlinearly stable laminar flow via boundary manipulation  

E-Print Network (OSTI)

referees which have led to a substantially improved discussion. SMER is supported by a doctoral training award from EPSRC. This work was performed using the Darwin Supercomputer of the University of Cambridge High Performance Computing Service (http...

Rabin, S. M. E.; Caulfield, C. P.; Kerswell, R. R.

2013-12-04T23:59:59.000Z

147

Study of solar and other unknown anti-neutrino fluxes with Borexino at LNGS  

E-Print Network (OSTI)

We report on the search for anti-neutrinos of yet unknown origin with the Borexino detector at the Laboratori Nazionali del Gran Sasso. In particular, a hypothetical anti-neutrino flux from the Sun is investigated. Anti-neutrinos are detected through the neutron inverse $\\beta$ decay reaction in a large liquid organic scintillator target. We set a new upper limit for a hypothetical solar $\\bar{\

G. Bellini; Borexino Collaboration

2010-09-30T23:59:59.000Z

148

Nonexistence of a universal quantum machine to examine the precision of unknown quantum states  

Science Conference Proceedings (OSTI)

In this work, we reveal a type of impossibility discovered in our recent research which forbids comparing the closeness of multiple unknown quantum states with any nontrivial threshold in a perfect or unambiguous way. This impossibility is distinct from the existing impossibilities in that it is a ''collective'' impossibility on multiple quantum states; most other ''no-go'' theorems are concerned with only one single state each time, i.e., it is an impossibility on a nonlocal quantum operation. This impossibility may provide new insight into the nature of quantum mechanics, and it implies more limitations on quantum information tasks than the existing no-go theorems.

Pang, Shengshi; Wu, Shengjun; Chen, Zeng-Bing [Hefei National Laboratory for Physical Sciences at Microscale and Department of Modern Physics, University of Science and Technology of China, Hefei, Anhui 230026 (China)

2011-12-15T23:59:59.000Z

149

Adaptive mechanism design: a metalearning approach  

Science Conference Proceedings (OSTI)

Auction mechanism design has traditionally been a largely analytic process, relying on assumptions such as fully rational bidders. In practice, however, bidders often exhibit unknown and variable behavior, making them difficult to model and complicating ... Keywords: auctions, machine learning, mechanism design, metalearning

David Pardoe; Peter Stone; Maytal Saar-Tsechansky; Kerem Tomak

2006-08-01T23:59:59.000Z

150

Assay of Drums with Unknown Content Stored in 247-41F  

Science Conference Proceedings (OSTI)

The Analytical Development Section of Savannah River Technology Center (SRTC) was requested by the Facilities Decontamination and Decommissioning Program (FDD) to determine the radionuclide content in two drums that were stored in an inactive warehouse of the Naval Fuels facility. The drums were labeled as containing fissile material and were placed in a critically safe arrangement, but it was not known whether they still contained the fissile material. Our g-PHA assay results indicate that the unknown highly enriched uranium (HEU) content of the two drums is one and 0.5 grams of surface contamination. Our neutron measurements confirmed that there are no significant lumps of 235U present in these drums and that only surface contamination is present. The results confirmed that the facility was in compliance with administrative controls for fissile materials and that it is safe to open the drums for visual inspection.

Dewberry, R.

2002-12-05T23:59:59.000Z

151

Programmable unknown quantum-state discriminators with multiple copies of program and data: A Jordan basis approach  

E-Print Network (OSTI)

The discrimination of any pair of unknown quantum states is performed by devices processing three parts of inputs: copies of the pair of unknown states we want to discriminate are respectively stored in two program systems and copies of data, which is guaranteed to be one of the unknown states, in a third system. We study the efficiency of such programmable devices with the inputs prepared with $n$ and $m$ copies of unknown qubits used as programs and data, respectively. By finding a symmetry in the average inputs, we apply the Jordan basis method to derive their optimal unambiguous discrimination and the minimum-error discrimination schemes. The dependence of the optimal solutions on the a prior probabilities of the mean input states is also demonstrated.

Bing He; János A. Bergou

2006-10-26T23:59:59.000Z

152

Miscellaneous and Electronic Loads Energy Efficiency Opportunities for  

NLE Websites -- All DOE Office Websites (Extended Search)

Miscellaneous and Electronic Loads Energy Efficiency Opportunities for Miscellaneous and Electronic Loads Energy Efficiency Opportunities for Commercial Buildings: A Collaborative Study by the United States and India Title Miscellaneous and Electronic Loads Energy Efficiency Opportunities for Commercial Buildings: A Collaborative Study by the United States and India Publication Type Report Refereed Designation Unknown LBNL Report Number LBNL-6287E Year of Publication 2013 Authors Ghatikar, Girish, Iris H. Y. Cheung, and Steven Lanzisera Secondary Authors Wardell, Bob, Manoj Deshpande, Jayraj Ugarkar, and Infosys Technologies Limited Date Published 04/2013 Keywords Electronic loads, energy efficiency opportunities for commercial buildings Short Title MELs Refereed Designation Unknown Attachment Size PDF 1.44 MB Google Scholar BibTex

153

Progress towards Managing Residential Electricity Demand: Impacts of  

NLE Websites -- All DOE Office Websites (Extended Search)

Progress towards Managing Residential Electricity Demand: Impacts of Progress towards Managing Residential Electricity Demand: Impacts of Standards and Labeling for Refrigerators and Air Conditioners in India Title Progress towards Managing Residential Electricity Demand: Impacts of Standards and Labeling for Refrigerators and Air Conditioners in India Publication Type Conference Paper Refereed Designation Unknown LBNL Report Number LBNL-2322E Year of Publication 2009 Authors McNeil, Michael A., and Maithili Iyer Date Published 06/2009 Keywords Air Conditioners, Appliance Efficiency, appliance energy efficiency, energy efficiency, greenhouse gas emissions, india, Labels, MEPS, refrigerators, Standards and labeling URL https://isswprod.lbl.gov/library/view-docs/public/output/rpt77250.PDF Refereed Designation Unknown Attachment Size

154

Meta-design: design for designers  

Science Conference Proceedings (OSTI)

One fundamental challenge for the design of the interactive systems of the future is to invent and design environments and cultures in which humans can express themselves and engage in personally meaningful activities. Unfortunately, a large number of ... Keywords: consumer and designer mindsets, designing “out of the box”, domain-oriented design environments, evolutionary growth, impact of new media on design, open evolvable systems, open source, reseeding model, seeding, underdesigned systems

Gerhard Fischer; Eric Scharff

2000-08-01T23:59:59.000Z

155

Supports for high tech : permanence and change in building system design  

E-Print Network (OSTI)

The obsolescence of our constantly changing built environment is leading architects, now more than ever, towards designing for unknown future requirements. This condition has become manifest in the design of "High Tech" ...

Luna Herrera, Pablo

1990-01-01T23:59:59.000Z

156

Positive design  

Science Conference Proceedings (OSTI)

This article is focused on the changes needed in design to create positive solutions for all involved in design processes. It draws upon the rich discussion and discourse from a conference focused on positive design involving managers, designers, and ...

Jurgen Faust

2009-09-01T23:59:59.000Z

157

Efficient Sensor Deployment Control Schemes and Performance Evaluation for Obstacle and Unknown Environments  

Science Conference Proceedings (OSTI)

Deployment is a fundamental issue for wireless sensor networks (WSNs). A well-designed deployment control method not only directly influences the number of deployed sensors, but also influences on data accuracy and network topology. Three widely discussed ... Keywords: Deployment, Evaluate factors, Slow-start, Square-encircled, Wireless sensor networks

Hsu-Yang Kung; Chung-Ming Huang; Hao-Hsaing Ku

2008-04-01T23:59:59.000Z

158

Javascript Design  

Science Conference Proceedings (OSTI)

From the Publisher:JavaScript Design shows designers how to create interactive JavaScript applications for the Web. It provides detailed descriptions of:JavaScript structures, statements and objectsUsing JavaScript to create different ...

Bill B. Sanders

2001-12-01T23:59:59.000Z

159

Experimental design  

Science Conference Proceedings (OSTI)

Maximizing data information requires careful selection, termed design, of the points at which data are observed. Experimental design is reviewed here for broad classes of data collection and analysis problems, including: fractioning techniques ... Keywords: Key Design Issues in Data Mining, Science and Technology, Statistical Fundamentals

J. P. Morgan; Xinwei Deng

2012-03-01T23:59:59.000Z

160

Designing Creativity  

E-Print Network (OSTI)

Is it possible to design for creativity? This is one of the most important research questions in AI and Design. This paper raises the question whether automated software agent design can be creative. Not only is the artefact dynamic in the sense that it adapts to its environment, it is also autonomous: an agent decides on its own when to be modified and by whom. An agent's functionality may evolve beyond the expectations of its designers and/or users resulting in very new, unique artefacts. Is this type of design creative? Is the process creative? The result? 1.

Frances M. T. Brazier; Niek J. E. Wijngaards

2002-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "refereed designation unknown" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Publications for Keith A. Brewster, Ph.D. Refereed Publications  

E-Print Network (OSTI)

. Bassett, K. Droegemeier, M. Xue, and K. Brewster, 1996: Experiences using high performance computing on Commercial and industrial Applications on High Performance Computing. John Wiley & Sons, Ltd., 731-740. #12

Droegemeier, Kelvin K.

162

NASA and Superalloys: A Customer, a Participant, and a Referee  

Science Conference Proceedings (OSTI)

arena has traditionally been viewed as providing fundamental ... normal handbook values. It is our ... fundamental properties of superalloy foams, such as that.

163

LIST OF PUBLICATIONS -1 -Publications in Refereed Journals  

E-Print Network (OSTI)

.: "On the relation between coronal free energy and solar flare occurrence", Hvar Obs. Bull., 2005 period observed in solar flares?", A&A, 2005, 433, p.707. · Temmer, M., Veronig A., Rybák, J., Brajsa, R. & Hanslmeier A.: "On the 24-day period observed in H-alpha flares", Solar Phys., 2004, 221, p.325 · Veronig A

Temmer Manuela

164

Lawrence Wiencke Publications (Last Updated Sept 20th Refereed Journals  

E-Print Network (OSTI)

. Wiencke et al., Proc 27th ICRC, HE 140 (2001). 87. "A fiber-optic based calibration system for the Hi:95, (2004). 43. "Geometry and Optics Calibration for Air Fluorescence Detectors Using Star Light", T. Abu eV", with T. Abu-Zayyed et al. Astroparticle Phys 16, 1 (2001). 47. "A fiber-optic based calibration

165

LSU School of Renewable Natural Resources Refereed Publications: 2005 1994  

E-Print Network (OSTI)

over 52,000 Little East Champions! Continued on page 6 Kinsey Durgin drives for a layup in class 3, Portrait of a Plant in Cultivation. She received third prize in class 4, Rock Garden Scene on a sophomore guard Tirrell Hill layup. Keene State threatened with 5:29 left to go, cutting the lead down

166

Design Specifications  

NLE Websites -- All DOE Office Websites (Extended Search)

Design Design Specifications Services Overview ECS Audio/Video Conferencing Fasterdata IPv6 Network Network Performance Tools (perfSONAR) ESnet OID Registry PGP Key Service Virtual Circuits (OSCARS) OSCARS Case Study Documentation User Manual FAQ Design Specifications Functional Specifications Notifications Publications Authorization Policy Default Attributes Message Security Clients For Developers Interfaces Links Hardware Requirements DOE Grids Service Transition Contact Us Technical Assistance: 1 800-33-ESnet (Inside the US) 1 800-333-7638 (Inside the US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network Problems: trouble@es.net Provide Web Site Feedback: info@es.net Design Specifications OSCARS Reservation Manager - Design Specifications Year 3 Update (DRAFT) David Robertson, Chin Guok

167

Testing for the Possible Influence of Unknown Climate Forcings upon Global Temperature Increases from 1950-2000  

SciTech Connect

Global-scale variations in the climate system over the last half of the twentieth century, including long-term increases in global-mean near-surface temperatures, are consistent with concurrent human-induced emissions of radiatively active gases and aerosols. However, such consistency does not preclude the possible influence of other forcing agents, including internal modes of climate variability or unaccounted for aerosol effects. To test whether other unknown forcing agents may have contributed to multidecadal increases in global-mean near-surface temperatures from 1950 to 2000, data pertaining to observed changes in global-scale sea surface temperatures and observed changes in radiatively active atmospheric constituents are incorporated into numerical global climate models. Results indicate that the radiative forcing needed to produce the observed long-term trends in sea surface temperatures—and global-mean near-surface temperatures—is provided predominantly by known changes in greenhouse gases and aerosols. Further, results indicate that less than 10% of the long-term historical increase in global-mean near-surface temperatures over the last half of the twentieth century could have been the result of internal climate variability. In addition, they indicate that less than 25%of the total radiative forcing needed to produce the observed long-term trend in global-mean near-surface temperatures could have been provided by changes in net radiative forcing from unknown sources (either positive or negative). These results, which are derived from simple energy balance requirements, emphasize the important role humans have played in modifying the global climate over the last half of the twentieth century.

Anderson, Bruce T.; Knight, Jeff R.; Ringer, Mark A.; Yoon, Jin-Ho; Cherchi, Annalisa

2012-10-15T23:59:59.000Z

168

Improved Dosimetric and Clinical Outcomes With Intensity-Modulated Radiotherapy for Head-and-Neck Cancer of Unknown Primary Origin  

SciTech Connect

Purpose: To compare differences in dosimetric, clinical, and quality-of-life endpoints among a cohort of patients treated by intensity-modulated radiotherapy (IMRT) and conventional radiotherapy (CRT) for head-and-neck cancer of unknown primary origin. Methods and Materials: The medical records of 51 patients treated by radiation therapy for squamous cell carcinoma of the head and neck presenting as cervical lymph node metastasis of occult primary origin were reviewed. Twenty-four patients (47%) were treated using CRT, and 27 (53%) were treated using IMRT. The proportions of patients receiving concurrent chemotherapy were 54% and 63%, respectively. Results: The 2-year estimates of overall survival, local-regional control, and disease-specific survival for the entire patient population were 86%, 89%, and84%, respectively. There were no significant differences in any of these endpoints with respect to radiation therapy technique (p > 0.05 for all). Dosimetric analysis revealed that the use of IMRT resulted in significant improvements with respect to mean dose and V30 to the contralateral (spared) parotid gland. In addition, mean doses to the ipsilateral inner and middle ear structures were significantly reduced with IMRT (p < 0.05 for all). The incidence of severe xerostomia in the late setting was 58% and 11% among patients treated by CRT and IMRT, respectively (p < 0.001). The percentages of patients who were G-tube dependent at 6 months after treatment were 42% and 11%, respectively (p < 0.001). Conclusions: IMRT results in significant improvements in the therapeutic ratio among patients treated by radiation therapy for head-and-neck cancer of unknown primary origin.

Chen, Allen M., E-mail: allen.chen@ucdmc.ucdavis.ed [Department of Radiation Oncology, University of California Davis School of Medicine, Sacramento, CA (United States); Li Baoqing [Department of Radiation Oncology, University of California Davis School of Medicine, Sacramento, CA (United States); Farwell, D. Gregory [Department of Otolaryngology-Head and Neck Surgery, University of California Davis School of Medicine, Sacramento, CA (United States); Marsano, Joseph; Vijayakumar, Srinivasan; Purdy, James A. [Department of Radiation Oncology, University of California Davis School of Medicine, Sacramento, CA (United States)

2011-03-01T23:59:59.000Z

169

Engitectural Design  

E-Print Network (OSTI)

Traditionally, Architecture and Engineering have been disciplines practiced exclusive of one another's input and collaboration. This seemingly awkward custom is due in part to tradition and to the two distinct perspectives each discipline has concerning the function of a building and it's many components. In the past, collaboration on a project generally occurred out of necessity, and can usually be attributed to a system and design integration problems. In most instances, these issues are related to the mechanical systems of building, and in a hot and humid climate the issues are magnified. Therefore, this paper will discuss the concepts and merits of a new design process called: Engitectural Design. Engitectural Design is the concept of blending the many design and aesthetic concerns of architecture with the more technical aspects of engineering, especially in the area of mechanical HVAC systems. The use of this new design procedure will reduce, if not eliminate, current problems with clearances, mechanical room size and optimal area selection. Merely incorporating the mechanical needs of a building during the schematic phase will reduce communication problems that cause the above mentioned problems, and thus optimize the system. This paper will address the mutual concerns of both professions as it pertains to materials, lighting, surface finishes, passive and active solar and the use of landscaping, focusing on the benefits of mutual agreement in a hot and humid climate. To be successful, the collaboration must begin in pre-design and continue through project completion. During initial implementation of Engitectural Design, a fm can expect each phase of a project to take longer than usual. Lack of established relationships, poor communication and professional territorial rights will exist in the beginning. However, over time a fm can expect a time reduction due to fewer revisions and the elimination of duplicated work. As it pertains to today's more advanced HVAC systems, this new cooperation and understanding of the needs within disciplines will yield a more effective and efficient operating unit for today's hot and humid environment.

Gagliardi, D. R.

1996-01-01T23:59:59.000Z

170

Space design  

Science Conference Proceedings (OSTI)

Space stations, Moon bases and Mars bases are artificial habitats intended to support human life in extreme conditions. Their purpose is to pursue human progress and to gain knowledge and experience of the environment surrounding our planet. This research ... Keywords: Human factors, Interior design, Space habitability, Sustainability, Vision

Irene Lia Schlacht; Henrik Birke

2011-06-01T23:59:59.000Z

171

Signal conditioning circuitry design for instrumentation systems.  

SciTech Connect

This report details the current progress in the design, implementation, and validation of the signal conditioning circuitry used in a measurement instrumentation system. The purpose of this text is to document the current progress of a particular design in signal conditioning circuitry in an instrumentation system. The input of the signal conditioning circuitry comes from a piezoresistive transducer and the output will be fed to a 250 ksps, 12-bit analog-to-digital converter (ADC) with an input range of 0-5 V. It is assumed that the maximum differential voltage amplitude input from the sensor is 20 mV with an unknown, but presumably high, sensor bandwidth. This text focuses on a specific design; however, the theory is presented in such a way that this text can be used as a basis for future designs.

Larsen, Cory A.

2012-01-01T23:59:59.000Z

172

Optimum Design and Selection of Heat Sinks  

E-Print Network (OSTI)

An analytical simulation model has been developed for predicting and optimizing the thermal performance of bidirectional fin heat sinks in a partiaHy confined configuration. Sample calculations are carried out, and parametric plots are provided, illustrating the effect of various design parameters on the performance of a heat sink. It is observed that the actual convection flow velocity through fins is usually unknown to designers, yet, is one of the parameters that greatly affect the overaH thermal performance of a heat sink. In this paper, a simple method of determining the fin flow velocity is presented, and the development of the overall thermai model is described. An overview of different types of heat sinks and associated design parameters is provided. Optimization of heat-sink designs and typical parametric behaviors are discussed based on the sample simulation results.

Seri Lee

1995-01-01T23:59:59.000Z

173

Mechanical Design  

SciTech Connect

The particle beam of the SXR (soft x-ray) beam line in the LCLS (Linac Coherent Light Source) has a high intensity in order to penetrate through samples at the atomic level. However, the intensity is so high that many experiments fail because of severe damage. To correct this issue, attenuators are put into the beam line to reduce this intensity to a level suitable for experimentation. Attenuation is defined as 'the gradual loss in intensity of any flux through a medium' by [1]. It is found that Beryllium and Boron Carbide can survive the intensity of the beam. At very thin films, both of these materials work very well as filters for reducing the beam intensity. Using a total of 12 filters, the first 9 being made of Beryllium and the rest made of Boron Carbide, the beam's energy range of photons can be attenuated between 800 eV and 9000 eV. The design of the filters allows attenuation for different beam intensities so that experiments can obtain different intensities from the beam if desired. The step of attenuation varies, but is relative to the thickness of the filter as a power function of 2. A relationship for this is f(n) = x{sub 0}2{sup n} where n is the step of attenuation desired and x{sub 0} is the initial thickness of the material. To allow for this desired variation, a mechanism must be designed within the test chamber. This is visualized using a 3D computer aided design modeling tool known as Solid Edge.

2010-08-25T23:59:59.000Z

174

Modeling of decentralized linear observer and tracker for a class of unknown interconnected large-scale sampled-data nonlinear systems with closed-loop decoupling property  

Science Conference Proceedings (OSTI)

A novel low-order modeling of decentralized linear observer-based tracker is presented in this paper for a class of unknown interconnected large-scale sampled-data nonlinear systems with closed-loop decoupling property. The appropriate (low-)order decentralized ... Keywords: Digital redesign, Large-scale system, Observer, Observer/Kalman filter identification, Tracker

Jason Sheng-Hong Tsai; Nien-Tsu Hu; Po-Chuan Yang; Shu-Mei Guo; Leang-San Shieh

2010-08-01T23:59:59.000Z

175

Teleportation of a two-qubit arbitrary unknown state using a four-qubit genuine entangled state with the combination of bell-state measurements  

SciTech Connect

We propose a protocol transferring an arbitrary unknown two-qubit state using the quantum channel of a four-qubit genuine entangled state. Simplifying the four-qubit joint measurement to the combination of Bell-state measurements, it can be realized more easily with currently available technologies.

Dong, Li; Xiu, Xiao-Ming, E-mail: xiuxiaomingdl@126.com [Dalian University of Technology, School of Physics and Optoelectronic Technology (China)] [Dalian University of Technology, School of Physics and Optoelectronic Technology (China); Ren, Yuan-Peng [Bohai University, Higher Professional Technical Institute (China)] [Bohai University, Higher Professional Technical Institute (China); Gao, Ya-Jun [Bohai University, College of Mathematics and Physics (China)] [Bohai University, College of Mathematics and Physics (China); Yi, X. X. [Dalian University of Technology, School of Physics and Optoelectronic Technology (China)] [Dalian University of Technology, School of Physics and Optoelectronic Technology (China)

2013-01-15T23:59:59.000Z

176

Nonlinear Matroid Optimization and Experimental Design  

E-Print Network (OSTI)

Jul 9, 2007 ... in learning an unknown system whose output y is an unknown ...... We will choose sufficiently many suitable points on the moment curve in RZ, ...

177

Design Scenarios: Enabling transparent parametric design spaces  

Science Conference Proceedings (OSTI)

This paper presents a novel methodology called Design Scenarios (DSs) intended for use in conceptual design of buildings. DS enables multidisciplinary design teams to streamline the requirements definition, alternative generation, analysis, and decision-making ... Keywords: Conceptual design, Design spaces, Ontology, Parametric modeling, Process mapping, Requirements modeling

Victor Gane; John Haymaker

2012-08-01T23:59:59.000Z

178

Tutorial Design Windows - CECM  

E-Print Network (OSTI)

Tutorial Design Windows: Activity 2: Activity 2 Design Window Return to tutorial. Exercise 1: Exercise 1 Design Window Return to exercises. Exercise 2: Exercise  ...

179

Simplicity in interaction design  

Science Conference Proceedings (OSTI)

Attaining simplicity is a key challenge in interaction design. Our approach relies on a minimalist design exercise to explore the communication capacity for interaction components. This approach results in expressive design solutions, useful perspectives ... Keywords: expressiveness, interface design, simplicity, usability

Angela Chang; James Gouldstone; Jamie Zigelbaum; Hiroshi Ishii

2007-02-01T23:59:59.000Z

180

Method for measuring dose-equivalent in a neutron flux with an unknown energy spectra and means for carrying out that method  

DOE Patents (OSTI)

A method for measuring the dose-equivalent for exposure to an unknown and/or time varing neutron flux which comprises simultaneously exposing a plurality of neutron detecting elements of different types to a neutron flux and combining the measured responses of the various detecting elements by means of a function, whose value is an approximate measure of the dose-equivalent, which is substantially independent of the energy spectra of the flux. Also, a personnel neutron dosimeter, which is useful in carrying out the above method, comprising a plurality of various neutron detecting elements in a single housing suitable for personnel to wear while working in a radiation area.

Distenfeld, Carl H. (Mattituck, NY)

1978-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "refereed designation unknown" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Holistic ship design optimization  

Science Conference Proceedings (OSTI)

Ship design is a complex endeavor requiring the successful coordination of many disciplines, of both technical and non-technical nature, and of individual experts to arrive at valuable design solutions. Inherently coupled with the design process is design ... Keywords: Enhanced survivability, Genetic algorithms, Holistic ship design, Minimization of resistance and wash, Multi-objective optimization

Apostolos Papanikolaou

2010-11-01T23:59:59.000Z

182

Whither design space?  

Science Conference Proceedings (OSTI)

Design space exploration is a long-standing focus in computational design research. Its three main threads are accounts of designer action, development of strategies for amplification of designer action in exploration, and discovery of computational ... Keywords: Design Space Exploration, Knowledge Representation, Search, State Space, Typed Feature Structures

Robert F. Woodbury; Andrew L. Burrow

2006-04-01T23:59:59.000Z

183

Solar control design package  

DOE Green Energy (OSTI)

Information used in the evaluation of design of Solar Control's solar heating and cooling system controller and the Solarstat is presented. System performance specifications, design data brochures, and detailed design drawings are presented.

Not Available

1978-08-01T23:59:59.000Z

184

Computation & design for nanophotonics  

E-Print Network (OSTI)

The versatility of computational design as an alternative to design by nanofabrication has made computers a reliable design tool in nanophotonics. Given that almost any 2d pattern can be fabricated at infrared length scales, ...

Oskooi, Ardavan F

2010-01-01T23:59:59.000Z

185

Passive Solar Design  

Energy.gov (U.S. Department of Energy (DOE))

The difference between a passive solar home and a conventional home is design. Passive solar homes and other buildings are designed to take advantage of the local climate.

186

Radiation Therapy in the Management of Head-and-Neck Cancer of Unknown Primary Origin: How Does the Addition of Concurrent Chemotherapy Affect the Therapeutic Ratio?  

SciTech Connect

Purpose: To determine how the addition of cisplatin-based concurrent chemotherapy to radiation therapy influences outcomes among a cohort of patients treated for head-and-neck cancer of unknown primary origin. Methods and Materials: The medical records of 60 consecutive patients treated by radiation therapy for squamous cell carcinoma of the head and neck presenting as cervical lymph node metastasis of occult primary origin were reviewed. Thirty-two patients (53%) were treated by concurrent chemoradiation, and 28 patients (47%) were treated by radiation therapy alone. Forty-five patients (75%) received radiation therapy after surgical resection, and 15 patients (25%) received primary radiation therapy. Thirty-five patients (58%) were treated by intensity-modulated radiotherapy. Results: The 2-year estimates of overall survival, local-regional control, and progression-free survival were 89%, 89%, and 79%, respectively, among patients treated by chemoradiation, compared to 90%, 92%, and 83%, respectively, among patients treated by radiation therapy alone (p > 0.05, for all). Exploratory analysis failed to identify any subset of patients who benefited from the addition of concurrent chemotherapy to radiation therapy. The use of concurrent chemotherapy was associated with a significantly increased incidence of Grade 3+ acute and late toxicity (p < 0.001, for both). Conclusions: Concurrent chemoradiation is associated with significant toxicity without a clear advantage to overall survival, local-regional control, and progression-free survival in the treatment of head-and-neck cancer of unknown primary origin. Although selection bias cannot be ignored, prospective data are needed to further address this question.

Chen, Allen M., E-mail: allen.chen@ucdmc.ucdavis.edu [Department of Radiation Oncology, University of California Davis School of Medicine, Sacramento, CA (United States); Farwell, D. Gregory [Department of Otolaryngology-Head and Neck Surgery, University of California Davis School of Medicine, Sacramento, CA (United States); Lau, Derick H. [Department of Medical Oncology, University of California Davis School of Medicine, Sacramento, CA (United States); Li Baoqing [Department of Radiation Oncology, University of California Davis School of Medicine, Sacramento, CA (United States); Luu, Quang; Donald, Paul J. [Department of Otolaryngology-Head and Neck Surgery, University of California Davis School of Medicine, Sacramento, CA (United States)

2011-10-01T23:59:59.000Z

187

DOE handbook: Design considerations  

SciTech Connect

The Design Considerations Handbook includes information and suggestions for the design of systems typical to nuclear facilities, information specific to various types of special facilities, and information useful to various design disciplines. The handbook is presented in two parts. Part 1, which addresses design considerations, includes two sections. The first addresses the design of systems typically used in nuclear facilities to control radiation or radioactive materials. Specifically, this part addresses the design of confinement systems and radiation protection and effluent monitoring systems. The second section of Part 1 addresses the design of special facilities (i.e., specific types of nonreactor nuclear facilities). The specific design considerations provided in this section were developed from review of DOE 6430.1A and are supplemented with specific suggestions and considerations from designers with experience designing and operating such facilities. Part 2 of the Design Considerations Handbook describes good practices and design principles that should be considered in specific design disciplines, such as mechanical systems and electrical systems. These good practices are based on specific experiences in the design of nuclear facilities by design engineers with related experience. This part of the Design Considerations Handbook contains five sections, each of which applies to a particular engineering discipline.

NONE

1999-04-01T23:59:59.000Z

188

Designing decommissioning into new reactor designs  

SciTech Connect

One of the lessons learned from decommissioning of existing reactors has been that decommissioning was not given much thought when these reactors were designed some three or four decades ago. Recently, the nuclear power has seen a worldwide resurgence and many new advanced reactor designs are either on the market or nearing design completion. Most of these designs are evolutionary in nature and build on the existing and proven technologies. They also incorporate many improvements and take advantage of the substantial operating experience. Nevertheless, by and large, the main factors driving the design of new reactors are the safety features, safeguards considerations, and the economic factors. With a large decommissioning experience that already exists in the nuclear industry, and with average decommissioning costs at around six hundred million dollars for each reactor in today's dollars, it is necessary that decommissioning factors also be considered as a part of the early design effort. Even though decommissioning may be sixty years down the road from the time they go on line, it is only prudent that new designs be optimized for eventual decommissioning, along with the other major considerations. (authors)

Devgun, J.S.; CHMM, Ph.D. [Nuclear Power Technologies, Sargent and Lundy LLC, Chicago, IL (United States)

2007-07-01T23:59:59.000Z

189

Radiological design guide  

SciTech Connect

The purpose of this design guide is to provide radiological safety requirements, standards, and information necessary for designing facilities that will operate without unacceptable risk to personnel, the public, or the environment as required by the US Department of Energy (DOE). This design guide, together with WHC-CM-4-29, Nuclear Criticality Safety, WHC-CM-4-46, Nonreactor Facility Safety Analysis, and WHC-CM-7-5, Environmental Compliance, covers the radiation safety design requirements at Westinghouse Hanford Company (WHC). This design guide applies to the design of all new facilities. The WHC organization with line responsibility for design shall determine to what extent this design guide shall apply to the modifications to existing facilities. In making this determination, consideration shall include a cost versus benefit study. Specifically, facilities that store, handle, or process radioactive materials will be covered. This design guide replaces WHC-CM-4-9 and is designated a living document. This design guide is intended for design purposes only. Design criteria are different from operational criteria and often more stringent. Criteria that might be acceptable for operations might not be adequate for design.

Evans, R.A.

1994-08-16T23:59:59.000Z

190

Modification of the Monte Carlo method for calculation of the influence of unknown placement of solid radioactive waste on the uncertainty of dose fields at different overall container dimensions  

Science Conference Proceedings (OSTI)

An approach to estimating the uncertainty of initial data in calculations by the Monte Carlo method is considered. The relative geometrical position of parts of the analyzed system is assumed to be unknown. The influence of different approximations in the description of the geometrical shape of system objects is studied. The effect of unknown location and approximate shape description of solid radioactive waste in the container on the magnitude of dose fields is considered for photon transport problems.

Androsenko, P. A.; Kolganov, K. M., E-mail: smilodonam@yandex.ru; Mogulyan, V. G. [National Research Nuclear University MEPhI, Obninsk Institute for Nuclear Power Engineering (Russian Federation)

2012-12-15T23:59:59.000Z

191

Conceptual Safety Design RM  

Energy.gov (U.S. Department of Energy (DOE))

The Conceptual Safety Design (CSD) Review Module (RM) is a tool that assists DOE federal project review teams in evaluating the adequacy of the Conceptual Safety Design work, processes and...

192

Final Design RM  

Energy.gov (U.S. Department of Energy (DOE))

The Final Design (FD) Review Module (RM) is a tool that assists Department of Energy (DOE) federal project review teams in evaluating the technical sufficiency of the final design prior to CD-3...

193

Preliminary Safety Design RM  

Energy.gov (U.S. Department of Energy (DOE))

The Preliminary Safety Design (PSD) Review Module (RM) is a tool that assists DOE federal project review teams in evaluating the adequacy of the Preliminary Safety Design work, processes and...

194

Energy design for architects  

Science Conference Proceedings (OSTI)

This book contains techniques for energy efficiency in architectural design. Many aspects are covered including: cost; comfort and health; energy use; the design process; and analytical techniques. 202 figs. (JF)

Shaw, A. (ed.)

1989-01-01T23:59:59.000Z

195

Design of intelligent interiors  

E-Print Network (OSTI)

Ubiquitous computing is transforming interior design by allowing utilities, goods and information to be delivered where and when we need them. How will new information technologies impact the design of interior spaces? ...

Bonanni, Leonardo Amerigo, 1977-

2005-01-01T23:59:59.000Z

196

Seismic Design Expectations Report  

Energy.gov (U.S. Department of Energy (DOE))

The Seismic Design Expectations Report (SDER) is a tool that assists DOE federal project review teams in evaluating the technical sufficiency of the project seismic design activities prior to...

197

Investigations in Pyranometer Design  

Science Conference Proceedings (OSTI)

Three approaches to the design of total (global) solar pyranometers that employ new technologies and materials of manufacture are described. The pyranometers are designed to meet or exceed the requirements for high quality instruments as ...

D. J. Beaubien; A. Bisberg; A. F. Beaubien

1998-06-01T23:59:59.000Z

198

Furnace Design and Operation  

Science Conference Proceedings (OSTI)

...S. Lampman, Energy-Efficient Heat-Treating Furnace Design and Operation, Heat Treating, Vol 4, ASM Handbook, ASM International,

199

Participation in design things  

Science Conference Proceedings (OSTI)

This paper discusses the design of things. This is done in an attempt to conceptually explore some of the political and practical challenges to participatory design today. Which things, and which participants? The perspective is strategic and conceptual. ... Keywords: design, object, participation, public, thing, use

Pelle Ehn

2008-10-01T23:59:59.000Z

200

Wet Stacks Design Guide  

Science Conference Proceedings (OSTI)

The expense of fluegas reheat has led to increased application of less expensive wet stacks downstream of wet FGD (flue gas desulfurization) systems. Good data is necessary to properly design the wet stack system or serious problems can occur. This design guide summarizes all the latest information and provides guidance on developing detailed design specifications.

1997-01-04T23:59:59.000Z

Note: This page contains sample records for the topic "refereed designation unknown" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Attached sunspace design analysis  

DOE Green Energy (OSTI)

An introduction to new design analysis information for attached sunspaces is presented. The 28 sunspace reference designs are described. Note is taken of those designs (the semi-enclosed geometries) analyzed more recently than the previously published reports. The role of sensitivity studies is discussed, and some sample plots of sunspace performance sensitivity to key design parameters are presented. The monthly solar load ratio (SLR) correlations are reviewed with emphasis on the modified SLR used in the sunspace analysis. The application of the sunspace SLR correlations to monthly design analysis is outlined.

Jones, R.W.; McFarland, R.D.

1981-01-01T23:59:59.000Z

202

Final Beamline Design Report  

NLE Websites -- All DOE Office Websites (Extended Search)

Final Beamline Design Report Final Beamline Design Report Guidelines and Review Criteria (SCD 1.20.95) 6.0 Final Beamline Design Report (FDR) Overview The Final Beamline Design Report is part of the Advanced Photon Source (APS) beamline review process and should be planned for when approximately 90% of the total beamline design has been completed. Fifteen copies of the FDR are to be submitted to the APS Users Office. Approval of the Collaborative Access Team's (CAT) designs described in the report is required prior to installation of beamline components in the APS Experiment Hall. Components that have a long lead time for design or procurement can be reviewed separately from the remainder of the beamline, but enough information must be provided so that the reviewer can understand the

203

Visualization Design Environment  

SciTech Connect

Improvements in the performance and capabilities of computer software and hardware system, combined with advances in Internet technologies, have spurred innovative developments in the area of modeling, simulation and visualization. These developments combine to make it possible to create an environment where engineers can design, prototype, analyze, and visualize components in virtual space, saving the time and expenses incurred during numerous design and prototyping iterations. The Visualization Design Centers located at Sandia National Laboratories are facilities built specifically to promote the ''design by team'' concept. This report focuses on designing, developing and deploying this environment by detailing the design of the facility, software infrastructure and hardware systems that comprise this new visualization design environment and describes case studies that document successful application of this environment.

Pomplun, A.R.; Templet, G.J.; Jortner, J.N.; Friesen, J.A.; Schwegel, J.; Hughes, K.R.

1999-02-01T23:59:59.000Z

204

The Building Design Advisor  

SciTech Connect

The Building Design Advisor (BDA) is a software environment that supports the integrated use of multiple analysis and visualization tools throughout the building design process, from the initial, schematic design phases to the detailed specification of building components and systems. Based on a comprehensive design theory, the BDA uses an object-oriented representation of the building and its context, and acts as a data manager and process controller to allow building designers to quickly navigate through the multitude of descriptive and performance parameters addressed by the analysis and visualization tools linked to the BDA. Through the Browser the user can edit the values of input parameters and select any number of input and/or output parameters for display in the Decision Desktop. The Desktop allows building designers to compare multiple design alternatives with respect to any number of parameters addressed by the tools linked to the BDA.

Papamichael, K.; LaPorta, J.; Chauvet, H.; Collins, D.; Trzcinski, T.; Thorpe, J.; Selkowitz, S.

1996-03-01T23:59:59.000Z

205

Building Design | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Design Design Building Design October 16, 2013 - 4:41pm Addthis Planning, Programming & Budgeting Building Design Project Construction Integrating renewable energy within Federal new construction or major renovations is critical at each phase of the design process. This overview covers considerations for renewable energy in the design phases of a construction project, including choosing the design team, the design team charrette, preliminary design, schematic design, design development, and construction documents. Information on this page introduces each of the design phases and provides a link to deeper-level information. Key Actions in Building Design Require specific renewable energy experience and skills for design team. Prioritize energy-related program

206

Role of Radiotherapy in the Treatment of Cervical Lymph Node Metastases From an Unknown Primary Site: Retrospective Analysis of 113 Patients  

SciTech Connect

Purpose: The management of patients with cervical lymph-node metastases from unknown primary site (UPS) remains a matter of discussion. This study aimed to analyze the results and prognostic factors in a series of patients treated with radiotherapy. Methods and Materials: Data from 113 patients who presented with cervical lymph nodes metastases from UPS treated from 1980 to 2004 were reviewed. Eighty-seven patients (77.0%) were squamous cell carcinoma (SCC). Ninety-one patients were treated with curative and 22 with palliative intent. Fifty-nine of 113 patients (52.2%) received surgery followed by radiotherapy and 54 of 113 (47.8%) received radiotherapy alone. Radiotherapy was delivered to the neck and pharyngeal mucosa in 67 patients and to the ipsilateral or bilateral neck in 45 patients. Twenty-one patients (18.5%) also received chemotherapy. Results: The 5-year overall survival rates were 40.7% for the entire group and 46.6% for the SCC subgroup. The occurrence of the occult primary was observed in 23 of 113 patients (20.3%), 19 (82.6%) within the head and neck region. At multivariate analysis, treatment with curative intent and extensive irradiation of bilateral neck and pharyngeal mucosa were favorable prognostic factors for the whole series, and treatment with curative intent, extensive irradiation of bilateral neck and pharyngeal mucosa, and absence of extracapsular spread were favorable prognostic factors for the SCC subgroup. Conclusions: Patients with cervical lymph node metastases from UPS have a similar prognosis to those affected by other head and neck malignancies. Curative treatment strategies including neck dissection and extensive irradiation by three-dimensional conformal radiation therapy resulted in significantly better outcomes.

Beldi, Debora [Radiotherapy Department, Hospital Maggiore della Carita, Novara (Italy); Jereczek-Fossa, Barbara A. [Radiotherapy Department, European Institute of Oncology, Milan (Italy); University of Milan, Milan (Italy); D'Onofrio, Alberto [Epidemiology and Biostatistics, European Institute of Oncology, Milan (Italy); Gambaro, Giuseppina [Radiotherapy Department, Hospital Maggiore della Carita, Novara (Italy); Fiore, Maria Rosaria [Radiotherapy Department, European Institute of Oncology, Milan (Italy); Pia, Francesco [Head and Neck Surgery, University of Piemonte Orientale-Hospital Maggiore della Carita, Novara (Italy); Chiesa, Fausto [Head and Neck Surgery, European Institute of Oncology, Milan (Italy); Orecchia, Roberto [Radiotherapy Department, European Institute of Oncology, Milan (Italy); University of Milan, Milan (Italy); Krengli, Marco [Radiotherapy Department, Hospital Maggiore della Carita, Novara (Italy); University of 'Piemonte Orientale', Novara (Italy)], E-mail: krengli@med.unipmn.it

2007-11-15T23:59:59.000Z

207

Central ballast tanker design  

SciTech Connect

The purpose of this paper is to present the CENTRAL BALLAST TANKER Design. This design is intended to reduce the volume of oil spilled from tankers by giving the crew a tanker properly designed and equipped to allow large quantities of oil from ruptured tank(s) to flow safely to a fully-inerted central ballast tank. In addition to reducing the volume of oil spilled, the design also addresses many of the shortcomings of the DOUBLE HULL DESIGN which are increasingly becoming a concern. The following is a brief review of the development of the CENTRAL BALLAST TANKER. The simple operational features, stability, low cost and ease of maintenance of the single hull tanker were important and can be retained with the CENTRAL BALLAST DESIGN.

1997-01-01T23:59:59.000Z

208

Pre-physical data base design heuristics  

Science Conference Proceedings (OSTI)

Keywords: data base, data base design, data base management, data model, denormalization, design improvement, design refinement, physical design, system design

Narciso Cerpa

1995-06-01T23:59:59.000Z

209

Dwell on Design [Dispatches  

E-Print Network (OSTI)

use, and urban design. Toyota USA, Inc. , provided majorE)MergingThoughts The support from Toyota was par- ticularlyyears. ” For companies like Toyota, this transformation to a

Sullivan, Lisa

2007-01-01T23:59:59.000Z

210

PREFACE THE DESIGN MANUAL  

E-Print Network (OSTI)

developed and adopted a series of documents that describe the codes, standards, details, products, and practices to be followed by Architect/Engineers (A/Es). These documents apply to all design of construction at all facilities on property owned by the Authority. Facilities constructed or modified on the site occupied by the National Air and Space Museum located at Washington Dulles International Airport are exempt from the requirements of the Authority Design Manual. The Design Manual has been developed to assist Architects/Engineers (A/Es) in understanding the practices and policies that must be incorporated into each project. The Design Manual contains a number of specific requirements that must be followed on all projects, as described above. These can be either Authority contracted projects, Authority direct-constructed projects, and tenant contracted projects. APPLICABILITY OF THE DESIGN MANUAL The requirements for design and construction incorporated into the Design Manual and Supporting Volumes are regulations approved by the Metropolitan Washington Airports Authority Board of Directors and shall be considered contract requirements for all A/Es who are performing services under contract to the Authority. Although A/Es who are under contract to tenants of the Authority may not be working under contract provisions that make compliance with these requirements mandatory, the Authority reserves the right, as Owner of all airport facilities, and land on which tenant buildings are constructed, to reject any design or work that does not comply with the requirements of the Design Manual and its

unknown authors

2010-01-01T23:59:59.000Z

211

Interior Design Sample Occupations  

E-Print Network (OSTI)

Companies Historic Preservation Agencies Hospitals Interior Design Firms/Studios Hotel Chains Cost Estimator Architect Manufacturer's Representative Schools Television and Motion Picture Studios Theatres Utilities

Ronquist, Fredrik

212

The LCLS Design Group  

NLE Websites -- All DOE Office Websites (Extended Search)

R-593 April 2002 UC-414 Linac Coherent Light Source (LCLS) Conceptual Design Report Published April 2002 Prepared for the Department of Energy under contract number...

213

Industrial experience with design patterns  

Science Conference Proceedings (OSTI)

A design pattern is a particular prose form of recording design information such that designs which have worked well in the past can be applied again in similar situations in the future. The availability of a collection of design patterns can help both ... Keywords: best practices, design information recording, design patterns, design reuse, industrial experience, information sharing, software architecture documentation, software reusability, system documentation

Kent Beck; Ron Crocker; Gerard Meszaros; John Vlissides; James O. Coplien; Lutz Dominick; Frances Paulisch

1996-05-01T23:59:59.000Z

214

A practical generative design method  

Science Conference Proceedings (OSTI)

A generative CAD based design exploration method is proposed. It is suitable for complex multi-criteria design problems where important performance criteria are uncomputable. The method is based on building a genotype of the design within a history based ... Keywords: Computer aided conceptual design, Evolutionary design, Generative design, Parametric design

Sivam Krish

2011-01-01T23:59:59.000Z

215

STEAM GENERATOR PRELIMINARY DESIGN  

SciTech Connect

A conceptual study on design of sodium-cooled reactor steam generators was conducted. Included is a detailed description of the preliminary design and analysis, based on the use of known materials and existing methods of fabrication. (See also APAE-41 Vols. I and III.) (J.R.D.)

1959-02-28T23:59:59.000Z

216

Blocking response surface designs  

Science Conference Proceedings (OSTI)

The design of experiments involving more than one blocking factor and quantitative explanatory variables is discussed, the focus being on two key aspects of blocked response surface designs: optimality and orthogonality. First, conditions for orthogonally ... Keywords: D-optimality, Exchange algorithm, Fixed blocks, Orthogonality, Random blocks

P. Goos; A. N. Donev

2006-11-01T23:59:59.000Z

217

Energy and lighting design  

SciTech Connect

A detailed examination of the current energy conservation practices for lighting systems is presented. This first part of a two-part presentation covers the following: energy and lighting design; lighting and energy standards; lighting efficiency factors; light control and photometrics; lighting and the architectural interior; luminaire impact on the environment; basic design techniques; the lighting power budget; and conservation through control.

Helms, R.N.

1979-11-01T23:59:59.000Z

218

Reading context in design  

E-Print Network (OSTI)

This study explores how, in the process of design, the reading of an existing order in the organizing features of a setting potentiates form. For this purpose, a design exercise on a site in the city of Jaipur in India has ...

Agrawal, Vivek

1993-01-01T23:59:59.000Z

219

Designing creative artificial systems  

Science Conference Proceedings (OSTI)

Can artificial systems be creative? Can they be designed to be creative on their own? What are the requirements of such creative artificial systems? To be able to support humans who are expected to deliver creative solutions, or to automate part of their ... Keywords: Agent, Creativity, Design, Interactivity, Learning, Self-Organization

Pieter H. G. Van Langen; Niek J. E. Wijngaards; Frances M. T. Brazier

2004-06-01T23:59:59.000Z

220

Graphite design handbook  

Science Conference Proceedings (OSTI)

The objectives of the Graphite Design Handbook (GDH) are to provide and maintain a single source of graphite properties and phenomenological model of mechanical behavior to be used for design of MHTGR graphite components of the Reactor System, namely, core support, permanent side reflector, hexagonal reflector elements, and prismatic fuel elements; to provide a single source of data and material models for use in MHTGR graphite component design, performance, and safety analyses; to present properties and equations representing material models in a form which can be directly used by the designer or analyst without the need for interpretation and is compatible with analytical methods and structural criteria used in the MHTGR project, and to control the properties and material models used in the MHTGR design and analysis to proper Quality Assurance standards and project requirements. The reference graphite in the reactor internal components is the nuclear grade 2020. There are two subgrades of interest, the cylinder nuclear grade and the large rectangular nuclear grade. The large rectangular nuclear grade is molded in large rectangular blocks. It is the reference material for the permanent side reflector and the central column support structure. The cylindrical nuclear grade is isostatically pressed and is intended for use as the core support component. This report gives the design properties for both H-451 and 2020 graphite as they apply to their respective criteria. The properties are presented in a form for design, performance, and safety calculations that define or validate the component design. 103 refs., 20 figs., 19 tabs.

Ho, F.H.

1988-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "refereed designation unknown" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Architectural design for reliability  

DOE Green Energy (OSTI)

Design-for-reliability concepts can be applied to the products of the construction industry, which includes buildings, bridges, transportation systems, dams, and other structures. The application of a systems approach to designing in reliability emphasizes the importance of incorporating uncertainty in the analyses, the benefits of optimization analyses, and the importance of integrating reliability, safety, and security. 4 refs., 3 figs.

Cranwell, R.M.; Hunter, R.L.

1997-08-01T23:59:59.000Z

222

Functional Annotation and Mechanistic Characterization of Enzymes with Unknown Functions: Studies on Adenine Deaminase, N-6-Methyladenine Deaminase and the C-P Lyase Pathway  

E-Print Network (OSTI)

Adenine deaminase (ADE) catalyzes the conversion of adenine to hypoxanthine. Mechanistic characterization of ADE from Escherichia coli was performed along with biophysical studies. The structure of ADE was solved from A. tumefaciens. The structure, along with the biochemical and biophysical characterization, enabled the elucidation of the mechanism of the deaminase reaction of ADE. Elucidation of the origin of the oxygenation reactions within ADE led to the discovery of a promiscuous catalase reaction. The diiron ADE from all tested bacterial species exhibited this unusual reaction, along with the generation of superoxide and hydroxyl radicals, the latter being responsible for the oxygenation of the protein. The residues that were identified to be oxygenated were primarily the metal binding residues implying the origin of this reaction was the binuclear iron center. A group of bacterial enzymes that are co-localized in the same genomic operon as ADE but of unknown function were identified. The enzyme Bh0637 from Bacillus halodurans, a representative member of this group of enzymes was characterized. This enzyme was shown to preferentially catalyze the deamination of epigenetic base, N-6-methyadenine. Lastly, gram-negative bacteria have a highly conserved phn operon composed of 14 genes to break the C-P bond of inert alkylphosphonates. The genes phnGHIJKLM are absolutely critical for this activity. We discovered that methylphosphonate reacts first with MgATP to form alpha-D-ribose-1-methylphosphonate-5-triphosphate (RPnTP) and adenine by the action of PhnI, PhnG, PhnH and PhnL. PhnI by itself was shown to perform a novel nucleosidase reaction converting MgATP to ribose-5-triphosphate and adenine. The triphosphate moiety of RPnTP is then hydrolyzed to pyrophosphate and alpha-D-ribose-1-methylphosphonate-5-phosphate (PRPn) by PhnM. The carbon-phosphorus bond of PRPn is subsequently cleaved via a radical-based reaction to alpha-D-ribose-1,2-cyclic-phosphate-5-phosphate (PRcP) and methane in the presence of S-adenosyl-L-methionine by PhnJ.

Kamat, Siddhesh

2012-08-01T23:59:59.000Z

223

Energy manager design for microgrids  

E-Print Network (OSTI)

Energy Manager Design for Microgrids Hillier, F. , and G.Energy Manager Design for Microgrids Appendix A: Smart*DER:Manager Design for Microgrids Prepared for the California

Firestone, Ryan; Marnay, Chris

2005-01-01T23:59:59.000Z

224

Life-Changing Drug Design  

NLE Websites -- All DOE Office Websites (Extended Search)

facilities are aimed at designing more effective drugs with fewer side effects. Life-Changing Drug Design One notable example is vemurafenib, a drug designed by...

225

FATIGUE DESIGN CURVES FOR  

Office of Scientific and Technical Information (OSTI)

FATIGUE DESIGN CURVES FATIGUE DESIGN CURVES FOR 6061-T6 ALUMINUM* G . T . Yahr Engineering Technology Division Oak Ridge National Laboratory Oak Ridge, Tennessee 37831-8051 ABSTRACT A request has been made to the ASME Boiler and Pressure Vessel Committee that 6061-T6 aluminum be approved for use in the construction of Class 1 welded nuclear vessels so it can be used for the pressure vessel of the Advanced Neutron Source research reactor. Fatigue design curves with and without mean stress effects have been proposed. A knock-down factor of two is applied to the design curve for evaluation of welds. The basis of the curves is explained. The fatigue design curves are compared to fatigue data from base metal and weldments. DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States

226

Beyond Design Basis Events  

NLE Websites -- All DOE Office Websites (Extended Search)

Beyond Design Basis Events Beyond Design Basis Events Following the March 2011 Fukushima Daiichi nuclear plant accident in Japan, DOE embarked upon several initiatives to investigate the safety posture of its nuclear facilities relative to beyond design basis events (BDBEs). These initiatives included issuing Safety Bulletin 2011-01, Events Beyond Design Safety Basis Analysis, and conducting two DOE nuclear safety workshops. DOE also issued two reports documenting the results of these initiatives: Review of Requirements and Capabilities for Analyzing and Responding to BDBEs, August 2011, and Report to the Secretary of Energy on Beyond Design Basis Event Pilot Evaluations, Results and Recommendations for Improvements to Enhance Nuclear Safety at DOE Nuclear Facilities, January 2013.

227

Final Design RM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Final Design Review Module Final Design Review Module March 2010 CD-0 [This Rev Design Re O 0 view Module w eview of the OR OFFICE OF C CD-1 was used to dev R U 233 Dispo F ENVIRO Standard R Fin Rev Critical Decis CD-2 M velop the Revie osition Project ONMENTAL Review Plan al Design view Module sion (CD) Ap CD March 2010 ew Plan for 90% in 2009. Lesso Module.] L MANAGE n (SRP) n e pplicability D-3 % Design Revi ons learned hav EMENT CD-4 iew of SWPF i ve been incorpo Post Ope in 2008 and for orated in the R eration r 60% Review Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental Management (EM) projects are identified early and addressed proactively.

228

Beam director design report  

Science Conference Proceedings (OSTI)

A design and fabrication effort for a beam director is documented. The conceptual design provides for the beam to pass first through a bending and focusing system (or ''achromat''), through a second achromat, through an air-to-vacuum interface (the ''beam window''), and finally through the vernier steering system. Following an initial concept study for a beam director, a prototype permanent magnet 30/sup 0/ beam-bending achromat and prototype vernier steering magnet were designed and built. In volume II, copies are included of the funding instruments, requests for quotations, purchase orders, a complete set of as-built drawings, magnetic measurement reports, the concept design report, and the final report on the design and fabrication project. (LEW)

Younger, F.C.

1986-08-01T23:59:59.000Z

229

Cooperative Modeling and Design History Tracking Using Design Tracking Matrix  

E-Print Network (OSTI)

This thesis suggests a new framework for cooperative modeling which supports concurrency design protocol with a design history tracking function. The proposed framework allows designers to work together while eliminating design conflicts and redundancies, and preventing infeasible designs. This framework provides methods to track optimal design path and redundant design history in the overall design process. This cooperative modeling architecture consists of a modeling server and voxel-based multi-client design tool. Design change among server and multiple clients are executed using the proposed concurrency design protocol. The design steps are tracked and analyzed using Design Tracking Graph and Design Tracking Matrix (DTM), which provide a design data exchange algorithm allowing seamless integration of design modifications between participating designers. This framework can be used for effective cooperative modeling, and helps identify and eliminate conflicts and minimize delay. The proposed algorithm supports effective cooperative design functions. First, it provides a method to obtain the optimal design path which can be stored in a design library and utilized in the future design. Second, it helps capture modeling pattern which can be used for analyzing designer's performance. Finally, obtained redundancies can be used to evaluate designer?s design efficiency.

Kim, Jonghyun

2009-08-01T23:59:59.000Z

230

REFEREE: an open framework for practical testing of recommender systems using ResearchIndex  

Science Conference Proceedings (OSTI)

Automated recommendation (e.g., personalized product recommendation on an ecommerce web site) is an increasingly valuable service associated with many databases--typically online retail catalogs and web logs. Currently, a major obstacle for evaluating ... Keywords: citeseer, collaborative filtering, content, digital libraries, information retrieval, personalization, recommender systems, researchindex, social filtering

Dan Cosley; Steve Lawrence; David M. Pennock

2002-08-01T23:59:59.000Z

231

Journal of Undergraduate A Refereed Journal for Undergraduate Research in the Pure & Applied Sciences,  

E-Print Network (OSTI)

, page 65); 2) Scanning electron micro- scope image of hafnia coated poly-caprolactone (PCL) fibers under. C. Skaalure, S. C. Oppegard and D. T. Eddington Plasma Assisted Synthesis of a Molybdenum Carbide-emulsions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 P. A. Chando, S. S. Ray and A. L. Yarin Atomic Layer Deposition of Hafnium Oxide on Silicon

Illinois at Chicago, University of

232

The Design Procedure Language Manual  

E-Print Network (OSTI)

This manual describes the Design Procedure Language (DPL) for LSI design. DPL creates and maintains a representation of a design in a hierarchically organized, object-oriented LISP data-base. Designing in DPL involves ...

Batali, John

1980-09-01T23:59:59.000Z

233

Passive solar design handbook  

DOE Green Energy (OSTI)

The Passive Solar Design Handbook, Volume Three updates Volume Two by presenting extensive new data on the optimum mix of conservation and solar direct gain, sunspaces, thermal storage walls, and solar radiation. The direct gain, thermal storage wall, and solar radiation data are greatly expanded relative to the Volume 2 coverage. The needed flexibility to analyze a variety of system designs is accommodated by the large number of reference designs to be encompassed - 94 in contrast to 6 in Volume two - and the large amount of sensitivity data for direct gain and sunspace systems - approximately 1100 separate curves.

Jones, R.W.

1981-01-01T23:59:59.000Z

234

Rampressor Turbine Design  

DOE Green Energy (OSTI)

The design of a unique gas turbine engine is presented. The first Rampressor Turbine engine rig will be a configuration where the Rampressor rotor is integrated into an existing industrial gas turbine engine. The Rampressor rotor compresses air which is burned in a traditional stationary combustion system in order to increase the enthalpy of the compressed air. The combustion products are then expanded through a conventional gas turbine which provides both compressor and electrical power. This in turn produces shaft torque, which drives a generator to provide electricity. The design and the associated design process of such an engine are discussed in this report.

Ramgen Power Systems

2003-09-30T23:59:59.000Z

235

Renewable Portfolio Standards in the United States: A Status Report with  

NLE Websites -- All DOE Office Websites (Extended Search)

Renewable Portfolio Standards in the United States: A Status Report with Renewable Portfolio Standards in the United States: A Status Report with Data Through 2007 Title Renewable Portfolio Standards in the United States: A Status Report with Data Through 2007 Publication Type Report Refereed Designation Unknown Year of Publication 2008 Authors Wiser, Ryan H., and Galen L. Barbose Pagination 40 Date Published 04/2008 Publisher LBNL City Berkeley Keywords electricity markets and policy group, energy analysis and environmental impacts department, renewable energy, renewable energy policies, wind energy Abstract As the popularity of renewables portfolio standards (RPS) has grown, so too has the need to keep up with the design, early experience, and projected impacts of these programs. This report - the first in a regular series - seeks to fill this need by providing basic, factual information on RPS policies in the United States.

236

Infrastructure for Integrated Electronics Design & ...  

Science Conference Proceedings (OSTI)

Infrastructure for Integrated Electronics Design & Manufacturing (IIEDM) Project. ... designed to support distributed supply chain integration and e ...

2010-11-05T23:59:59.000Z

237

2003 CBECS Sample Design  

U.S. Energy Information Administration (EIA) Indexed Site

Technical Information > Sample Design Technical Information > Sample Design How the Survey Was Conducted 2003 Commercial Buildings Energy Consumption Survey: Sample Design Introduction The Commercial Buildings Energy Consumption Survey (CBECS) is conducted quadrennially by the Energy Information Administration (EIA) to provide basic statistical information about energy consumption and expenditures in U.S. commercial buildings and information about energy-related characteristics of these buildings. The survey is based upon a sample of commercial buildings selected according to the sample design requirements described below. A “building,” as opposed to an “establishment,” is the basic unit of analysis for the CBECS because the building is the energy-consuming unit. The 2003 CBECS was the eighth survey conducted since 1979

238

Nuclear Facility Design  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Design Design FUNCTIONAL AREA GOAL: Headquarters and Field organizations and their contractors ensure that nuclear facilities are designed to assure adequate protection for the public, workers, and the environment from nuclear hazards. REQUIREMENTS: ï‚· 10 CFR 830.120 ï‚· 10 CFR 830 subpart B ï‚· DOE O 413.3 ï‚· DOE O 420.1B ï‚· DOE O 414.1C ï‚· DOE O 226.1 ï‚· DOE M 426.1 ï‚· DEAR 970-5404-2 Guidance: ï‚· DOE G 420.1-1 ï‚· Project Management Practices, Integrated Quality ( Rev E, June 2003) ï‚· DOE Implementation Plan for DNSB Recommendation 2004-2 Performance Objective 1: Contractor Program Documentation Contracts between and the contractors who operate nuclear facilities contain adequate requirements concerning the conduct of nuclear facility safety design for nuclear facility capital projects and major modifications and the

239

Transformation inverse design  

E-Print Network (OSTI)

We present a new technique for the design of transformation-optics devices based on large-scale optimization to achieve the optimal effective isotropic dielectric materials within prescribed index bounds, which is ...

Liu, David

240

Design considerations for MRAM  

Science Conference Proceedings (OSTI)

MRAM (magnetic random access memory) technology, based on the use of magnetic tunnel junctions (MTJs) as memory elements, is a potentially fast nonvolatile memory technology with very high write endurance. This paper is an overview of MRAM design considerations. ...

T. M. Maffitt; J. K. DeBrosse; J. A. Gabric; E. T. Gow; M. C. Lamorey; J. S. Parenteau; D. R. Willmott; M. A. Wood; W. J. Gallagher

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "refereed designation unknown" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Design of nanomanufacturing systems  

E-Print Network (OSTI)

Over 100 years of manufacturing knowledge and experience are available to a design engineer when considering the integration of a machine tool enabling macro-scale processes (milling, turning, welding, water-jet cutting) ...

Slocum, Alexander Henry, Jr

2010-01-01T23:59:59.000Z

242

Service oriented architectural design  

Science Conference Proceedings (OSTI)

We propose Architectural Design Rewriting (ADR), an approach to formalise the development and reconfiguration of software architectures based on term-rewriting. An architectural style consists of a set of architectural elements and operations called ...

R. Bruni; A. Lluch Lafuente; U. Montanari; E. Tuosto

2007-11-01T23:59:59.000Z

243

Safety Design Strategy RM  

Energy.gov (U.S. Department of Energy (DOE))

The SDS Review Module (RM) is a tool that assists DOE federal project review teams in evaluating the adequacy of the conceptual safety design strategy documentation package (Conceptual Safety...

244

Conceptual Design RM  

Energy.gov (U.S. Department of Energy (DOE))

This Review Module is a tool that assists Department of Energy (DOE) federal project review teams in evaluating the adequacy of the conceptual design package prior to CD-1 approval. It focuses on...

245

DESIGN [fabrication] BUILD  

E-Print Network (OSTI)

DESIGN [fabrication] BUILD proposes a new relationship among the architect, homeowner, and fabricator/assembler through the use of parametric software in order to create a truly customizable prefabricated home. This ...

Rader, Nicolas Glen

2006-01-01T23:59:59.000Z

246

Design and Drafting  

NLE Websites -- All DOE Office Websites (Extended Search)

Prototyping -- Desktop 3D Printing The Design & Drafting Group has an Objet30 Pro 3D printer that provides the accuracy and versatility of a high-end rapid prototyping machine...

247

Expert assistants for design  

Science Conference Proceedings (OSTI)

Two expert programs currently under development at the Los Alamos National Laboratory, PROCON and the Designer's Apprentice, are briefly described. Both codes define interface to simulations that provide a wide variety of information about the performance of complex devices. (BCS)

Aldridge, J.; Cerutti, J.; Draisin, W.; Steuerwalt, M.

1986-01-01T23:59:59.000Z

248

Neighborhood design for Cambridge  

E-Print Network (OSTI)

This thesis examines the problem of modest high-density low-rise housing design for a site in Cambridge, Massachusetts. It considers first the general changes in housing demand and the housing industry which have made it ...

Reynolds, Margaret (Margaret Philpott Ray), 1953-

1981-01-01T23:59:59.000Z

249

Alternative energy design toolkit  

E-Print Network (OSTI)

This thesis concerns the concepts, structure, and applications of the Alternative Energy Design Toolkit. The toolkit is aimed to provide a widely accessible, easy to use, flexible, yet powerful modeling environment for ...

Sukkasi, Sittha

2004-01-01T23:59:59.000Z

250

Designing building skins  

E-Print Network (OSTI)

This thesis involves framing criteria and discerning issues to be considered in the design of building skins in an urban environment. The 'information age' has paradoxically seen the demise of the facade as an important ...

Desai, Arjun

1992-01-01T23:59:59.000Z

251

Advanced Energy Design Guides  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

One way to influence above-code One way to influence above-code exemplary energy performance in commercial buildings is to provide architects, engineers, and other design practitioners prescriptive guidance that indicates, measure by measure, how to do it. To this end, the U.S. Department of Energy (DOE) actively supports development of a series of AEDGs- publications designed to provide recommendations for achieving 30 to 50

252

Designing Competitive Electricity Markets  

Science Conference Proceedings (OSTI)

This volume contains papers that were discussed at the first workshop on Markets for Electricity: Economics and Technology (MEET) held at Stanford University on March 7-8, 1997. The workshop's focus was how to design competitive electricity markets in an industry undergoing rapid changes in both economics and technology. The intended audience includes policy makers, policy-oriented academics, and corporate leaders. Chapters include: Introduction: Economic and Technological Principles in Designing Power M...

1998-12-19T23:59:59.000Z

253

AETR NUCLEAR MOCKUP DESIGN  

SciTech Connect

The Advanced Engineering Test Reactor (AETR) nuclear mockup is designed to be a flexible, inexpensive developmental facility which duplicates the reactor portion of the AETR and which would be used to verify the operation of reactor controls. The mockup would also furnish measurements of temperature and void coefficients, flux shapes, and critical mass, and facilitate a reliable AETR design in a minimum time, and with minimum development cost. For even greater usefulness, the mockup is also designed for use in conjunction with an operating AETR to check the reactivity of experiments and fuel assemblies, and for other annular core reactor development purposes. In these respects, the mockup design embodies the concepts for a very low power nuclear auxiliary outlined in an earlier report. Detail design was limited to the reactor assembly and control systems and it is assumed that a simple building with supporting facilities may be readily supplied by private industry or the AEC. Results of negotiations with potential vendors and fabricators, a description of the facility components, and design drawings suitable for contractor use are presented. Preliminary quotations from fabricators and suppliers indicate that the facility can be in operation within an eight month period at a total cost not exceeding

Leonard, B.H.; Bertelson, P.C.; Kornfeld, M.J.; Wade, E.E.

1959-10-01T23:59:59.000Z

254

Design documentation: Krypton encapsulation preconceptual design  

Science Conference Proceedings (OSTI)

US EPA regulations limit the release of Krypton-85 to the environment from commercial facilities after January 1, 1983. In order to comply with these regulations, Krypton-85, which would be released during reprocessing of commercial nuclear fuel, must be collected and stored. Technology currently exists for separation of krypton from other inert gases, and for its storage as a compressed gas in steel cylinders. The requirements, which would be imposed for 100-year storage of Krypton-85, have led to development of processes for encapsulation of krypton within a stable solid matrix. The objective of this effort was to provide preconceptual engineering designs, technical evaluations, and life cycle costing data for comparison of two alternate candidate processes for encapsulation of Krypton-85. This report has been prepared by The Ralph M. Parsons Company for the US Department of Energy.

Knecht, D.A. [Idaho National Engineering Lab., Idaho Falls, ID (United States)

1994-10-01T23:59:59.000Z

255

Silo Storage Preconceptual Design  

Science Conference Proceedings (OSTI)

The National Nuclear Security Administration (NNSA) has a need to develop and field a low-cost option for the long-term storage of a variety of radiological material. The storage option’s primary requirement is to provide both environmental and physical protection of the materials. Design criteria for this effort require a low initial cost and minimum maintenance over a 50-year design life. In 1999, Argonne National Laboratory-West was tasked with developing a dry silo storage option for the BN-350 Spent Fuel in Aktau Kazakhstan. Argon’s design consisted of a carbon steel cylinder approximately 16 ft long, 18 in. outside diameter and 0.375 in. wall thickness. The carbon steel silo was protected from corrosion by a duplex coating system consisting of zinc and epoxy. Although the study indicated that the duplex coating design would provide a design life well in excess of the required 50 years, the review board was concerned because of the novelty of the design and the lack of historical use. In 2012, NNSA tasked Idaho National Laboratory (INL) with reinvestigating the silo storage concept and development of alternative corrosion protection strategies. The 2012 study, “Silo Storage Concepts, Cathodic Protection Options Study” (INL/EST-12-26627), concludes that the option which best fits the design criterion is a passive cathotic protection scheme, consisting of a carbon steel tube coated with zinc or a zinc-aluminum alloy encapsulated in either concrete or a cement grout. The hot dipped zinc coating option was considered most efficient, but the flame-sprayed option could be used if a thicker zinc coating was determined to be necessary.

Stephanie L. Austad; Patrick W. Bragassa; Kevin M Croft; David S Ferguson; Scott C Gladson; Annette L Shafer; John H Weathersby

2012-09-01T23:59:59.000Z

256

Advanced Design Studies  

Science Conference Proceedings (OSTI)

The ARIES-CS project was a multi-year multi-institutional pro ject to assess the feasibility of a compact stellarator as a fusion power plant. The work herein describes efforts to help design one aspect of the device, the divertor, which is responsible for the removal of particle and heat flux from the system, acting as the first point of contact between the magnetically confined hot plasma and the outside world. Specifically, its location and topology are explored, extending previous work on the sub ject. An optimized design is determined for the thermal particle flux using a suite of 3D stellarator design codes which trace magnetic field lines from just inside the confined plasma edge to their strike points on divertor plates. These divertor plates are specified with a newly developed plate design code. It is found that a satisfactory thermal design exists which maintains the plate temperature and heat load distribution below tolerable engineering limits. The design is unique, including a toroidal taper on the outboard plates which was found to be important to our results. The maximum thermal heat flux for the final design was 3.61 M W/m2 and the maximum peaking factor was 10.3, below prescribed limits of 10 M W/m2 and 15.6, respectively. The median length of field lines reaching the plates is about 250 m and their average angle of inclination to the surface is 2? . Finally, an analysis of the fast alphas, resulting from fusion in the core, which escape the plasma was performed. A method is developed for obtaining the mapping from magnetic coordinates to real-space coordinates for the ARIES-CS. This allows the alpha exit locations to be identified in real space for the first time. These were then traced using the field line algorithm as well as a guiding center routine accounting for their mass, charge, and specific direction and energy. Results show that the current design is inadequate for accommodating the alpha heat flux, capturing at most 1/3 of lost alphas. However the distribution of the alphas on the device first wall indicates that a viable solution likely exists. It is noted that future designs must be sought which specifically address the fusion alphas through an integrated approach involving physics and engineering teams.

Steiner, Don [Rensselaer Polytechnic Institute

2012-12-01T23:59:59.000Z

257

Safety Design Strategy RM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Safety Design Strategy Review Module Safety Design Strategy Review Module March 2010 OFFICE OF ENVIRONMENTAL MANAGEMENT Standard Review Plan (SRP) Safety Design Strategy (SDS) Review Module Critical Decision (CD) Applicability CD-0 CD-1 CD-2 CD-3 CD-4 Post Operation March 2010 Standard Review Plan, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental Management (EM) projects are identified early and addressed proactively. The internal EM project review process encompasses key milestones established by DOE O 413.3A, Change 1, Program and Project Management for the Acquisition of Capital Assets, DOE-STD-1189-2008,

258

Watermark Designs, Ltd.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Watermark Designs, Ltd. Watermark Designs, Ltd. (Showerheads) Issued: May 29,2012 BEFORE THE U.S. DEI 1 ARTMENT OF ENERGY WASHINGTON, D.C. 20585 ) ) ) ) ) ORDER Case Number: 2011-SW-2908 By the General Counsel, U.S. Department of Energy: I. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Watermark Designs, Ltd. ("Respondent"). The Compromise Agreement resolves the case initiated against Respondent pursuant to I 0 C.F.R. § 429.122 by Notice of Proposed Civil Penalty, alleging that Respondent distributed in commerce in the United States the Waterfall or Deluge Spout showerhead, basic model SH-FAL90, which failed to meet the applicable standard for water usage. See 10 C.F.R. § 430.32(p).

259

Preliminary Safety Design RM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Preliminary Safety Design Review Module Preliminary Safety Design Review Module March 2010 CD-0 O 0 OFFICE OF Pr C CD-1 F ENVIRO Standard R reliminar Rev Critical Decis CD-2 M ONMENTAL Review Plan ry Safety view Module sion (CD) Ap CD March 2010 L MANAGE n (SRP) y Design e pplicability D-3 EMENT CD-4 Post Ope eration Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental Management (EM) projects are identified early and addressed proactively. The internal EM project review process encompasses key milestones established by DOE O 413.3A, Change 1, Program and Project Management for the Acquisition of Capital Assets, DOE-STD-1189-2008,

260

Seismic Design Expectations Report  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Seismic Design Expectations Report Seismic Design Expectations Report March 2010 CD- This Rev of th Se -0 view Module w he overall Cons OFFICE O eismic De C CD-1 was used to dev struction Projec inco OF ENVIRO Standard esign Exp Critical Deci CD-2 M velop the Revie ct Review cond orporated in the ONMENTA Review Pla pectation ision (CD) A C March 2010 ew Plan for the ducted in 2009 e current versio AL MANAG an (SRP) ns Report Applicability D-3 e Oak Ridge Bl 9. Lessons lear on of the Modu GEMENT t (SDER) CD-4 ldg. 3019 60% rned from this r ule. ) Post Ope design review review have be eration w as part een Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental

Note: This page contains sample records for the topic "refereed designation unknown" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Conceptual Safety Design RM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Conceptual Safety Design Review Module Conceptual Safety Design Review Module March 2010 CD-0 O 0 OFFICE OF C C CD-1 F ENVIRO Standard R Conceptua Rev Critical Decis CD-2 M ONMENTAL Review Plan al Safety view Module sion (CD) Ap CD March 2010 L MANAGE n (SRP) y Design e pplicability D-3 EMENT CD-4 Post Ope eration Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental Management (EM) projects are identified early and addressed proactively. The internal EM project review process encompasses key milestones established by DOE O 413.3A, Change 1, Program and Project Management for the Acquisition of Capital

262

OOTW Force Design Tools  

Science Conference Proceedings (OSTI)

This report documents refined requirements for tools to aid the process of force design in Operations Other Than War (OOTWs). It recommends actions for the creation of one tool and work on other tools relating to mission planning. It also identifies the governmental agencies and commands with interests in each tool, from whom should come the user advisory groups overseeing the respective tool development activities. The understanding of OOTWs and their analytical support requirements has matured to the point where action can be taken in three areas: force design, collaborative analysis, and impact analysis. While the nature of the action and the length of time before complete results can be expected depends on the area, in each case the action should begin immediately. Force design for OOTWs is not a technically difficult process. Like force design for combat operations, it is a process of matching the capabilities of forces against the specified and implied tasks of the operation, considering the constraints of logistics, transport and force availabilities. However, there is a critical difference that restricts the usefulness of combat force design tools for OOTWs: the combat tools are built to infer non-combat capability requirements from combat capability requirements and cannot reverse the direction of the inference, as is required for OOTWs. Recently, OOTWs have played a larger role in force assessment, system effectiveness and tradeoff analysis, and concept and doctrine development and analysis. In the first Quadrennial Defense Review (QDR), each of the Services created its own OOTW force design tool. Unfortunately, the tools address different parts of the problem and do not coordinate the use of competing capabilities. These tools satisfied the immediate requirements of the QDR, but do not provide a long-term cost-effective solution.

Bell, R.E.; Hartley, D.S.III; Packard, S.L.

1999-05-01T23:59:59.000Z

263

MEIC Design Progress  

SciTech Connect

This paper will report the recent progress in the conceptual design of MEIC, a high luminosity medium energy polarized ring-ring electron-ion collider at Jefferson lab. The topics and achievements that will be covered are design of the ion large booster and the ERL-circulator-ring-based electron cooling facility, optimization of chromatic corrections and dynamic aperture studies, schemes and tracking simulations of lepton and ion polarization in the figure-8 collider ring, and the beam-beam and electron cooling simulations. A proposal of a test facility for the MEIC electron cooler will also be discussed.

Zhang, Y; Douglas, D; Hutton, A; Krafft, G A; Li, R; Lin, F; Morozov, V S; Nissen, E W; Pilat, F C; Satogata, T; Tennant, C; Terzic, B; Yunn, C; Barber, D P; Filatov, Y; Hyde, C; Kondratenko, A M; Manikonda, S L; Ostroumov, P N

2012-07-01T23:59:59.000Z

264

Integrated system design report  

DOE Green Energy (OSTI)

The primary objective of the integrated system test phase is to demonstrate the commercial potential of a coal fueled diesel engine in its actual operating environment. The integrated system in this project is defined as a coal fueled diesel locomotive. This locomotive, shown on drawing 41D715542, is described in the separate Concept Design Report. The test locomotive will be converted from an existing oil fueled diesel locomotive in three stages, until it nearly emulates the concept locomotive. Design drawings of locomotive components (diesel engine, locomotive, flatcar, etc.) are included.

Not Available

1989-07-01T23:59:59.000Z

265

Remote Systems Design & Deployment  

Science Conference Proceedings (OSTI)

The Pacific Northwest National Laboratory (PNNL) was tasked by Washington River Protection Solutions, LLC (WRPS) to provide information and lessons learned relating to the design, development and deployment of remote systems, particularly remote arm/manipulator systems. This report reflects PNNL’s experience with remote systems and lays out the most important activities that need to be completed to successfully design, build, deploy and operate remote systems in radioactive and chemically contaminated environments. It also contains lessons learned from PNNL’s work experiences, and the work of others in the national laboratory complex.

Bailey, Sharon A.; Baker, Carl P.; Valdez, Patrick LJ

2009-08-28T23:59:59.000Z

266

CML: Evolution and Design  

E-Print Network (OSTI)

to the adoption of the simpler XOM model. None of this had an immediate effect on the surface schema of CML but has had deep influences on the subsequent design. 18 As a result of this, we developed the attributes and elements largely independently... that these correspond to different peaks. It was this type of experience that led us to propose an extremely flexible content model, constrained by the use of convention rather than XSD technology. The context-free attribute design has been largely successful...

Murray-Rust, Peter; Rzepa, Henry S

2011-07-04T23:59:59.000Z

267

Design patterns in FPS levels  

Science Conference Proceedings (OSTI)

Level designers create gameplay through geometry, AI scripting, and item placement. There is little formal understanding of this process, but rather a large body of design lore and rules of thumb. As a result, there is no accepted common language for ... Keywords: design patterns, game design, level design

Kenneth Hullett; Jim Whitehead

2010-06-01T23:59:59.000Z

268

Conceptual Design - Polar Drive Ignition Campaign  

SciTech Connect

The Laboratory for Laser Energetics (LLE) at the University of Rochester is proposing a collaborative effort with Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratories (LANL), the Naval Research Laboratory (NRL), and General Atomics (GA) with the goal of developing a cryogenic polar drive (PD) ignition platform on the National Ignition Facility (NIF). The scope of this proposed project requires close discourse among theorists, experimentalists, and laser and system engineers. This document describes how this proposed project can be broken into a series of parallel independent activities that, if implemented, could deliver this goal in the 2017 timeframe. This Conceptual Design document is arranged into two sections: mission need and design requirements. Design requirements are divided into four subsystems: (1) A point design that details the necessary target specifications and laser pulse requirements; (2) The beam smoothing subsystem that describes the MultiFM 1D smoothing by spectral dispersion (SSD); (3) New optical elements that include continuous phase plates (CPP's) and distributed polarization rotators (DPR's); and (4) The cryogenic target handling and insertion subsystem, which includes the design, fabrication, testing, and deployment of a dedicated PD ignition target insertion cryostat (PD-ITIC). This document includes appendices covering: the primary criteria and functional requirements, the system design requirements, the work breakdown structure, the target point design, the experimental implementation plan, the theoretical unknowns and technical implementation risks, the estimated cost and schedule, the development plan for the DPR's, the development plan for MultiFM 1D SSD, and a list of acronym definitions. While work on the facility modifications required for PD ignition has been in progress for some time, some of the technical details required to define the specific modifications for a Conceptual Design Review (CDR) remain to be defined. In all cases, the facility modifications represent functional changes to existing systems or capabilities. The bulk of the scope yet to be identified is associated with the DPR's and MultiFM beam smoothing. Detailed development plans for these two subsystems are provided in Appendices H and I; additional discussion of subsystem requirements based on the physics of PD ignition is given in Section 3. Accordingly, LLE will work closely with LLNL to develop detailed conceptual designs for the PD-specific facility modifications, including assessments of the operational impact of implementation (e.g., changing optics for direct rather than indirect-drive illumination and swapping from a hohlraum-based ITIC to one that supports PD). Furthermore, the experimental implementation plan represents the current best understanding of the experimental campaigns required to achieve PD ignition. This plan will evolve based on the lessons learned from the National Ignition Campaign (NIC) and ongoing indirect-drive ignition experiments. The plan does not take the operational realities of the PD configuration into account; configuration planning for the proposed PD experiments is beyond the scope of this document.

Hansen, R

2012-04-05T23:59:59.000Z

269

Conceptual Design - Polar Drive Ignition Campaign  

SciTech Connect

The Laboratory for Laser Energetics (LLE) at the University of Rochester is proposing a collaborative effort with Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratories (LANL), the Naval Research Laboratory (NRL), and General Atomics (GA) with the goal of developing a cryogenic polar drive (PD) ignition platform on the National Ignition Facility (NIF). The scope of this proposed project requires close discourse among theorists, experimentalists, and laser and system engineers. This document describes how this proposed project can be broken into a series of parallel independent activities that, if implemented, could deliver this goal in the 2017 timeframe. This Conceptual Design document is arranged into two sections: mission need and design requirements. Design requirements are divided into four subsystems: (1) A point design that details the necessary target specifications and laser pulse requirements; (2) The beam smoothing subsystem that describes the MultiFM 1D smoothing by spectral dispersion (SSD); (3) New optical elements that include continuous phase plates (CPP's) and distributed polarization rotators (DPR's); and (4) The cryogenic target handling and insertion subsystem, which includes the design, fabrication, testing, and deployment of a dedicated PD ignition target insertion cryostat (PD-ITIC). This document includes appendices covering: the primary criteria and functional requirements, the system design requirements, the work breakdown structure, the target point design, the experimental implementation plan, the theoretical unknowns and technical implementation risks, the estimated cost and schedule, the development plan for the DPR's, the development plan for MultiFM 1D SSD, and a list of acronym definitions. While work on the facility modifications required for PD ignition has been in progress for some time, some of the technical details required to define the specific modifications for a Conceptual Design Review (CDR) remain to be defined. In all cases, the facility modifications represent functional changes to existing systems or capabilities. The bulk of the scope yet to be identified is associated with the DPR's and MultiFM beam smoothing. Detailed development plans for these two subsystems are provided in Appendices H and I; additional discussion of subsystem requirements based on the physics of PD ignition is given in Section 3. Accordingly, LLE will work closely with LLNL to develop detailed conceptual designs for the PD-specific facility modifications, including assessments of the operational impact of implementation (e.g., changing optics for direct rather than indirect-drive illumination and swapping from a hohlraum-based ITIC to one that supports PD). Furthermore, the experimental implementation plan represents the current best understanding of the experimental campaigns required to achieve PD ignition. This plan will evolve based on the lessons learned from the National Ignition Campaign (NIC) and ongoing indirect-drive ignition experiments. The plan does not take the operational realities of the PD configuration into account; configuration planning for the proposed PD experiments is beyond the scope of this document.

Hansen, R

2012-04-05T23:59:59.000Z

270

STANDARD DESIGN CRITERIA  

DOE Patents (OSTI)

Hanford Atomic Production Operation specification gaides for design criteria, structural engineering, civil engineering, heating, ventilation, air conditioning, fire alarm systems, noise control, lighting, railroad construction, corrosion protection, and electrical engineering are presented. Details of this manual are given in TID-4100 (Suppl.). (N.W.R.)

None

1963-01-01T23:59:59.000Z

271

FHR Generic Design Criteria  

SciTech Connect

The purpose of this document is to provide an initial, focused reference to the safety characteristics of and a licensing approach for Fluoride-Salt-Cooled High-Temperature Reactors (FHRs). The document does not contain details of particular reactor designs nor does it attempt to identify or classify either design basis or beyond design basis accidents. Further, this document is an initial attempt by a small set of subject matter experts to document the safety and licensing characteristics of FHRs for a larger audience. The document is intended to help in setting the safety and licensing research, development, and demonstration path forward. Input from a wider audience, further technical developments, and additional study will be required to develop a consensus position on the safety and licensing characteristics of FHRs. This document begins with a brief overview of the attributes of FHRs and then a general description of their anticipated safety performance. Following this, an overview of the US nuclear power plant approval process is provided that includes both test and power reactors, as well as the role of safety standards in the approval process. The document next describes a General Design Criteria (GDC)–based approach to licensing an FHR and provides an initial draft set of FHR GDCs. The document concludes with a description of a path forward toward developing an FHR safety standard that can support both a test and power reactor licensing process.

Flanagan, G.F.; Holcomb, D.E.; Cetiner, S.M.

2012-06-15T23:59:59.000Z

272

FHR Generic Design Criteria  

Science Conference Proceedings (OSTI)

The purpose of this document is to provide an initial, focused reference to the safety characteristics of and a licensing approach for Fluoride-Salt-Cooled High-Temperature Reactors (FHRs). The document does not contain details of particular reactor designs nor does it attempt to identify or classify either design basis or beyond design basis accidents. Further, this document is an initial attempt by a small set of subject matter experts to document the safety and licensing characteristics of FHRs for a larger audience. The document is intended to help in setting the safety and licensing research, development, and demonstration path forward. Input from a wider audience, further technical developments, and additional study will be required to develop a consensus position on the safety and licensing characteristics of FHRs. This document begins with a brief overview of the attributes of FHRs and then a general description of their anticipated safety performance. Following this, an overview of the US nuclear power plant approval process is provided that includes both test and power reactors, as well as the role of safety standards in the approval process. The document next describes a General Design Criteria (GDC) - based approach to licensing an FHR and provides an initial draft set of FHR GDCs. The document concludes with a description of a path forward toward developing an FHR safety standard that can support both a test and power reactor licensing process.

Flanagan, George F [ORNL; Holcomb, David Eugene [ORNL; Cetiner, Mustafa Sacit [ORNL

2012-06-01T23:59:59.000Z

273

Artificial Heart Valve Design  

E-Print Network (OSTI)

Artificial Heart Valve Design Your Chance to be a Biomedical Engineer #12;Circulatory System Video #12;What is a Heart Valve? · Heart Valve Video #12;#12;What Does a Heart Valve Do? · Maintain the one direction flow of blood through the heart · Heart valves allow blood to flow through in a forward direction

Provancher, William

274

Shock Tube Design  

E-Print Network (OSTI)

Shock accelerated flows exhibit some of the most violent and complex mechanisms in nature by which two separate fluids can be mixed. The Richtmyer-Meshkov instability (RMI) is generated when a perturbed interface between two fluids is impulsively accelerated by a shock wave. In order to further study the phenomenon of the RMI, a new shock tube will be designed. This shock tube will have the capability to change the angle of inclination, allowing for a diverse possibility of fluid interfaces, and provide two driver sections to allow for dual shock capability. The tube was designed to accommodate a 2.5 MACH shockwave, and incorporated a factor of safety of 3 in the design. A modular approach to design was followed to allow further diversification of the shock tube by changing the configuration of the modules. A circular driver section was used to maximize volume and a square driven section was used to minimize affects from the boundary layer. A slide rail mechanism was devised for changing the diaphragms which allows a single person to change the diaphragm in a timely manner. The entire tube is supported on an I-beam to maintain the rigidity of the system while inclined. To accommodate a variable inclination, a hybrid winch support system was designed. A winch changes the angle of the tube and a telescoping support system maintains the position during experimentation. It was determined after running COSMOS finite element stress analysis, that with the 2.5 MPa internal pressure associated with a 2.5 MACH shock wave, a 19.05 mm sidewall thickness was needed to provide a factor of safety of 3.

Koppenberger, Peter K.

2010-05-01T23:59:59.000Z

275

Designing with interactive example galleries  

Science Conference Proceedings (OSTI)

Designers often use examples for inspiration; examples offer contextualized instances of how form and content integrate. Can interactive example galleries bring this practice to everyday users doing design work, and does working with examples help the ... Keywords: design thinking, examples

Brian Lee; Savil Srivastava; Ranjitha Kumar; Ronen Brafman; Scott R. Klemmer

2010-04-01T23:59:59.000Z

276

An expert system design for a crude oil distillation column with the neural networks model and the process optimization using genetic algorithm framework  

Science Conference Proceedings (OSTI)

In this study an expert system of a crude oil distillation column is designed to predict the unknown values of required product flow and temperature in required input feed characteristics. The system is also capable to optimize the distillation process ... Keywords: Distillation column, Expert system, Genetic algorithms, Neural networks model

S. Motlaghi; F. Jalali; M. Nili Ahmadabadi

2008-11-01T23:59:59.000Z

277

Building Distributed Energy Performance Optimization for China - a Regional  

NLE Websites -- All DOE Office Websites (Extended Search)

Distributed Energy Performance Optimization for China - a Regional Distributed Energy Performance Optimization for China - a Regional Analysis of Building Energy Costs and CO2 Emissions Title Building Distributed Energy Performance Optimization for China - a Regional Analysis of Building Energy Costs and CO2 Emissions Publication Type Conference Proceedings Refereed Designation Refereed LBNL Report Number LBNL-81770 Year of Publication 2012 Authors Feng, Wei, Nan Zhou, Chris Marnay, Michael Stadler, and Judy Lai Conference Name 2012 ACEEE Summer Study on Energy Efficiency in Buildings, August 12-17, 2012 Date Published 08/2012 Conference Location Pacific Grove, California ISBN Number 0-918249-XX-X Notes LBNL - XXXXX Refereed Designation Refereed Attachment Size PDF 5 MB Google Scholar BibTex RIS RTF XML Alternate URL: http://eetd.lbl.gov/node/52998

278

Computer-Based Design Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Design Tools Reaching decisionmakers during the building design process Concerns about energy production's environmental effects, which gained their first wide public exposure...

279

IPCC Special Report on Renewable Energy Sources and Climate Change  

NLE Websites -- All DOE Office Websites (Extended Search)

IPCC Special Report on Renewable Energy Sources and Climate Change IPCC Special Report on Renewable Energy Sources and Climate Change Mitigation Title IPCC Special Report on Renewable Energy Sources and Climate Change Mitigation Publication Type Report Refereed Designation Unknown Year of Publication 2011 Authors Edenhofer, Ottmar, Ramon Pichs-Madruga, Youba Sokona, Kristin Seyboth, Dan Arvizu, Thomas Bruckner, John Christensen, Helena Chum, Jean-Michel Devernay, Andre Faaij, Manfred Fischedick, Barry Goldstein, Gerrit Hansen, John Huckerby, Arnulf Jäger-Waldau, Susanne Kadner, Daniel M. Kammen, Volker Krey, Arun Kumar, Anthony Lewis, Oswaldo Lucon, Patrick Matschoss, Lourdes Maurice, Catherine Mitchell, William Moomaw, José Moreira, Alain Nadai, Lars J. Nilsson, John Nyboer, Atiq Rahman, Jayant A. Sathaye, Janet Sawin, Roberto Schaeffer, Tormod Schei, Steffen Schlömer, Ralph Sims, Christoph von Stechow, Aviel Verbruggen, Kevin Urama, Ryan H. Wiser, Francis Yamba, and Timm Zwickel

280

Quantifying the potential impact of energy efficiency and low carbon  

NLE Websites -- All DOE Office Websites (Extended Search)

Quantifying the potential impact of energy efficiency and low carbon Quantifying the potential impact of energy efficiency and low carbon policies for China Title Quantifying the potential impact of energy efficiency and low carbon policies for China Publication Type Conference Proceedings Refereed Designation Unknown LBNL Report Number LBNL-6161E Year of Publication 2013 Authors Zhou, Nan, David Fridley, Michael A. McNeil, Nina Zheng Khanna, Wei Feng, and Jing Ke Conference Name the European Council for an Energy-Efficient Economy's 2013 Summer Study on Energy Efficiency Date Published 03/2013 Publisher the European Council for an Energy-Efficient Economy Conference Location Toulon, France Keywords appliance energy efficiency, Buildings Energy Efficiency, china, Clean Energy Policy, CO2 intensity, energy efficiency, industrial energy efficiency, low carbon, Low Carbon Eco-City Development

Note: This page contains sample records for the topic "refereed designation unknown" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Demonstration of Intelligent Control and Fan Improvements in Computer Room  

NLE Websites -- All DOE Office Websites (Extended Search)

Demonstration of Intelligent Control and Fan Improvements in Computer Room Demonstration of Intelligent Control and Fan Improvements in Computer Room Air Handlers Title Demonstration of Intelligent Control and Fan Improvements in Computer Room Air Handlers Publication Type Report Refereed Designation Unknown LBNL Report Number LBNL-6007E Year of Publication 2012 Authors Coles, Henry C., Steve E. Greenberg, and Corrine Vita Document Number LBNL-6007E Date Published 12/2012 Publisher Lawrence Berkeley National Laboratory City Berkeley, CA Keywords air distribution, building technology and urban systems department, computer room air handler, crah control, data center, data center crah, ec fan, ecm, ecm fan, fan speed control, high tech and industrial systems group, plug fan, variable frequency drive, vfd, wireless control Abstract

282

Automated Phase Design and Timing Adjustment for Signal Phase Design  

Science Conference Proceedings (OSTI)

In this paper we describe the design processes of human traffic engineers and the development of an automated system that solves the problem of timing adjustment in signal phase sequence design. i>Signal phase sequencing refers to the sequence of ... Keywords: automated design, case-based reasoning, signal phase design, traffic management

L. Wang; C. C. Hayes; R. R. Penner

2001-06-01T23:59:59.000Z

283

Petroleum fuel facilities. design manual 22. Final design criteria  

SciTech Connect

Design criteria are presented for use by qualified engineers in designing liquid fueling and dispensing facilities. Included are basic requirements for the design of piping systems, pumps, heaters, and controls; the design of receiving, dispensing, and storage facilities; ballast treatment and sludge removal; corrosion and fire protection; and environmental requirements.

1982-08-01T23:59:59.000Z

284

DESIGN GUIDELINE SUMMARY  

NLE Websites -- All DOE Office Websites (Extended Search)

3 Rev. 3 3 Rev. 3 August 2003 Rev. June 2004 Design Guideline Summary Based on the GEOVISION Report of Stanford Linear Accelerator Tunnel Vibration Measurements Parsons Pasadena, CA For Stanford Linear Accelerator Center Stanford University Stanford, CA Abstract: This summary report is provided in order to suggest how the measurement data from the GEOVision report might be used by SLAC for their proposed Next Linear Collider facility. See the referenced report "Stanford Linear Accelerator Tunnel Vibration Measurements, Conducted at MTA Universal Subway Station, North Hollywood, California", by GEOVision dated July 28, 2003. The following discussions are an attempt to determine an upper bound methodology that can be used for design purposes. The data in the

285

Prelminary Design RM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Preliminary Design Review Module Preliminary Design Review Module March 2010 CD-0 O 0 OFFICE OF C CD-1 F ENVIRO Standard R Prelim Rev Critical Decis CD-2 M ONMENTAL Review Plan inary De view Module sion (CD) Ap CD March 2010 L MANAGE n (SRP) esign e pplicability D-3 EMENT CD-4 Post Ope eration Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental Management (EM) projects are identified early and addressed proactively. The internal EM project review process encompasses key milestones established by DOE O 413.3A, Change 1, Program and Project Management for the Acquisition of Capital Assets, DOE-STD-1189-2008,

286

RANGE DESIGN CRITERIA  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

RANGE DESIGN CRITERIA RANGE DESIGN CRITERIA U.S. DEPARTMENT OF ENERGY Office of Health, Safety and Security AVAILABLE ONLINE AT: INITIATED BY: http://www.hss.energy.gov Office of Health, Safety and Security Notices This document is intended for the exclusive use of elements of the Department of Energy (DOE), to include the National Nuclear Security Administration, their contractors, and other government agencies/individuals authorized to use DOE facilities. DOE disclaims any and all liability for personal injury or property damage due to use of this document in any context by any organization, group, or individual, other than during official government activities. Local DOE management is responsible for the proper execution of firearms-related programs for

287

Design and Drafting  

NLE Websites -- All DOE Office Websites (Extended Search)

Email Portal (Zimbra)* Email Portal (Zimbra)* * Operations Logbook* * Project Proposal System* * ICMS * Safety and Training * ANL ESQ Training * APS Phone Directory * Resources & Information* * Internal link Design and Drafting Group The Advanced Photon Source (APS) at Argonne National Laboratory is a national synchrotron-radiation research facility funded by the U.S. Department of Energy. Using high-brilliance x-ray beams from the APS, an international community of scientists conducts forefront basic and applied research in the fields of material science, biological science, physics, chemistry, environmental, geophysical and planetary science. The AES Design and Drafting Group supports the ASD and AES divisions' continued improvement of the accelerator as well as the scientific

288

Conceptual Design RM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Conceptual Design Review Module Conceptual Design Review Module March 2010 CD-0 O 0 OFFICE OF C CD-1 F ENVIRO Standard R Concep Rev Critical Decis CD-2 M ONMENTAL Review Plan ptual De view Module sion (CD) Ap CD March 2010 L MANAGE n (SRP) sign e pplicability D-3 EMENT CD-4 Post Ope eration Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental Management (EM) projects are identified early and addressed proactively. The internal EM project review process encompasses key milestones established by DOE O 413.3A, Change 1, Program and Project Management for the Acquisition of Capital Assets, DOE-STD-1189-2008,

289

Insulated pipe clamp design  

SciTech Connect

Thin wall large diameter piping for breeder reactor plants can be subjected to significant thermal shocks during reactor scrams and other upset events. On the Fast Flux Test Facility, the addition of thick clamps directly on the piping was undesired because the differential metal temperatures between the pipe wall and the clamp could have significantly reduced the pipe thermal fatigue life cycle capabilities. Accordingly, an insulated pipe clamp design concept was developed. The design considerations and methods along with the development tests are presented. Special considerations to guard against adverse cracking of the insulation material, to maintain the clamp-pipe stiffness desired during a seismic event, to minimize clamp restraint on the pipe during normal pipe heatup, and to resist clamp rotation or spinning on the pipe are emphasized.

Anderson, M.J.; Hyde, L.L.; Wagner, S.E.; Severud, L.K.

1980-01-01T23:59:59.000Z

290

Designing Effective Algorithm Visualizations  

E-Print Network (OSTI)

Advances in computing technology and the aordability of software and high-performance graphics hardware enabled rapid growth of visual tools. Today, not only very expensive workstations, but also low-cost PCs are capable of running computationally demanding visualization systems. Algorithm visualizations or the graphic depiction of algorithms in execution have been used in explaining, designing and analyzing algorithms since the early 1980s. Although many tools have been developed over the past twenty years, not enough attention has been paid to the analysis of users, their needs, tasks, and goals. This paper provides an overview of algorithm visualization techniques, based on the premise that a rethinking of algorithm animation design is required in order to harness its power for enhancing learning. More information about the topic can be found on the author's web page. 1

Sami Khuri

2001-01-01T23:59:59.000Z

291

Central station photovoltaic array-field designs and design practices  

SciTech Connect

This report reviews and critiques the designs of large (1 MW or greater) photovoltaic power systems operating in a utility generating station mode. Four existing installations and eight paper design studies are reviewed. In addition, subsystem-specific studies on grounding and fault protection, lightning protection, array field electrical circuit design, bypass diodes, power conditioning, and utility interfaces were reviewed. Detailed tabular summaries of system design features and characteristics are presented. Based on a critique of the designs and discussions with designers, installers, and operators, recommendations of design practices for future installations are made.

Noel, G.T.; Smith, R.W.

1987-03-01T23:59:59.000Z

292

Structured firewall design  

E-Print Network (OSTI)

Abstract. A firewall is a security guard placed at the point of entry between a private network and the outside Internet such that all incoming and outgoing packets have to pass through it. The function of a firewall is to examine every incoming or outgoing packet and decide whether to accept or discard it. This function is conventionally specified by a sequence of rules, where rules often conflict. To resolve conflicts, the decision for each packet is the decision of the first rule that the packet matches. The current practice of designing a firewall directly as a sequence of rules suffers from three types of major problems: (1) the consistency problem, which means that it is difficult to order the rules correctly; (2) the completeness problem, which means that it is difficult to ensure thorough consideration for all types of traffic; (3) the compactness problem, which means that it is difficult to keep the number of rules small (because some rules may be redundant and some rules may be combined into one rule). To achieve consistency, completeness, and compactness, we propose a new method called Structured Firewall Design, which consists of two steps. First, one designs a firewall using a Firewall Decision Diagram instead of a sequence of often conflicting rules. Second, a program converts the firewall decision diagram into a compact, yet functionally equivalent, sequence of rules. This method addresses the consistency problem because a firewall decision diagram is conflict-free. It addresses the completeness problem because the syntactic requirements of a firewall decision diagram force the designer to consider all types of traffic. It also addresses the compactness problem because in the second step we use two algorithms (namely FDD reduction and FDD marking) to combine rules together, and one algorithm (namely Firewall compaction) to remove redundant rules. Moreover, the techniques and algorithms presented in this paper are extensible to other rule-based systems such as IPsec rules.

Mohamed G. Gouda; Alex X. Liu

2007-01-01T23:59:59.000Z

293

ESF BLAST DESIGN ANALYSIS  

SciTech Connect

The purpose and objective of this design analysis are to develop controls considered necessary and sufficient to implement the requirements for the controlled drilling and blasting excavation of operations support alcoves and test support alcoves in the Exploratory Studies Facility (ESF). The conclusions reached in this analysis will flow down into a construction specification ensuring controlled drilling and blasting excavation will be performed within the bounds established here.

E.F. fitch

1995-03-13T23:59:59.000Z

294

Residential Duct Design Guide  

Science Conference Proceedings (OSTI)

To provide comfortable levels of heating or cooling, a space-conditioning system must be properly sized and carefully installed. Movement of air and passages through which air is moved are vitally important for comfort. An inadequate system can cause uncomfortable drafts, may fail to move sufficient air to meet space heating and cooling loads, or may result in excessive energy costs. The best way to avoid problems is to prevent them in the design stage. This guide gives HVAC specialists basic information...

2000-11-02T23:59:59.000Z

295

Slurry reactor design studies  

SciTech Connect

The objective of these studies was to perform a realistic evaluation of the relative costs of tublar-fixed-bed and slurry reactors for methanol, mixed alcohols and Fischer-Tropsch syntheses under conditions where they would realistically be expected to operate. The slurry Fischer-Tropsch reactor was, therefore, operated at low H{sub 2}/CO ratio on gas directly from a Shell gasifier. The fixed-bed reactor was operated on 2.0 H{sub 2}/CO ratio gas after adjustment by shift and CO{sub 2} removal. Every attempt was made to give each reactor the benefit of its optimum design condition and correlations were developed to extend the models beyond the range of the experimental pilot plant data. For the methanol design, comparisons were made for a recycle plant with high methanol yield, this being the standard design condition. It is recognized that this is not necessarily the optimum application for the slurry reactor, which is being proposed for a once-through operation, coproducing methanol and power. Consideration is also given to the applicability of the slurry reactor to mixed alcohols, based on conditions provided by Lurgi for an Octamix{trademark} plant using their standard tubular-fixed reactor technology. 7 figs., 26 tabs.

Fox, J.M.; Degen, B.D.; Cady, G.; Deslate, F.D.; Summers, R.L. (Bechtel Group, Inc., San Francisco, CA (USA)); Akgerman, A. (Texas A and M Univ., College Station, TX (USA)); Smith, J.M. (California Univ., Davis, CA (USA))

1990-06-01T23:59:59.000Z

296

GEM Technical Design Report  

SciTech Connect

The GEM collaboration was formed in June 1991 to develop a major detector for the SSC. The primary physics objectives of GEM are those central to the motivation for the SSC, to study high p{sub T} physics - exemplified by the search for Higgs bosons - and to search for new physics beyond the standard model. The authors present in this Technical Design Report (TDR) a detector with broad capabilities for the discovery and subsequent study of electroweak symmetry breaking, the origin of mass and flavor, and other physics requiring precise measurements of gammas, electrons, and muons - hence the name, GEM. In addition, as a design goal, they have taken care to provide the robustness needed to do the physics that requires high luminosity. Finally, good coverage and hermeticity allow the detection of missing transverse energy, E{sub T}. The GEM design emphasizes clean identification and high resolution measurement of the primary physics signatures for high p{sub T} physics. The approach is to make precise energy measurements that maximize the sensitivity to rare narrow resonances, to detect the elementary interaction products (quarks, leptons, and photons), and to build in the features required to reduce backgrounds.

1993-07-31T23:59:59.000Z

297

Photovoltaic Incentive Design Handbook  

DOE Green Energy (OSTI)

Investments in customer-owned grid-connected photovoltaic (PV) energy systems are growing at a steady pace. This is due, in part, to the availability of attractive economic incentives offered by public state agencies and utilities. In the United States, these incentives have largely been upfront lump payments tied to the system capacity rating. While capacity-based ''buydowns'' have stimulated the domestic PV market, they have been criticized for subsidizing systems with potentially poor energy performance. As a result, the industry has been forced to consider alternative incentive structures, particularly ones that pay based on long-term measured performance. The industry, however, lacks consensus in the debate over the tradeoffs between upfront incentive payments versus longer-term payments for energy delivery. This handbook is designed for agencies and utilities that offer or intend to offer incentive programs for customer-owned PV systems. Its purpose is to help select, design, and implement incentive programs that best meet programmatic goals. The handbook begins with a discussion of the various available incentive structures and then provides qualitative and quantitative tools necessary to design the most appropriate incentive structure. It concludes with program administration considerations.

Hoff, T. E.

2006-12-01T23:59:59.000Z

298

The poetics of design fiction  

Science Conference Proceedings (OSTI)

Design fiction is an emergent field within HCI and interaction design the understanding of which ultimately relies, so we argue, of an integrative account of poetics and design praxis. In this paper we give such an account. Initially, a precise definition ... Keywords: design fiction, poetics, utopianism

Thomas Markussen, Eva Knutz

2013-09-01T23:59:59.000Z

299

Design of an EPR blanket  

SciTech Connect

A blanket concept is presented which meets typical requirements anticipated for an Experimental Power Reactor. Design alternatives are reviewed. One-dimensional neutronic and thermal hydraulic results are presented for the ORNL reference design. Design consideration was given for remote maintenance and assembly requirements. Modifications of the reference design first wall are necessary because of high thermal stresses. (auth)

Bettis, E.S.; Huxford, T.J.; McAlees, D.G.; Santoro, R.T.; Watts, H.L.; Williams, M.L.

1975-01-01T23:59:59.000Z

300

Programmed design of ship forms  

Science Conference Proceedings (OSTI)

This paper describes a new category of CAD applications devoted to the definition and parameterization of hull forms, called programmed design. Programmed design relies on two prerequisites. The first one is a product model with a variety of types large ... Keywords: CAD language, Hull form, Parametric design, Product model, Programmed design

A. Rodríguez; L. Fernández-Jambrina

2012-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "refereed designation unknown" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Good, Better, Best: Designing a Designation Program for Solar | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Good, Better, Best: Designing a Designation Program for Solar Good, Better, Best: Designing a Designation Program for Solar Good, Better, Best: Designing a Designation Program for Solar December 4, 2012 - 4:00pm Addthis The Energy Department is gathering input on solar designation programs that could one day help consumers recognize the best products and services that the solar industry has to offer. | Photo by Dennis Schroeder/NREL. The Energy Department is gathering input on solar designation programs that could one day help consumers recognize the best products and services that the solar industry has to offer. | Photo by Dennis Schroeder/NREL. Minh Le Minh Le Program Manager, Solar Program How can I participate? To provide input for the Designation Program for Solar Energy Stakeholders Request for Information (RFI), submit your feedback.

302

Interactive fracture design model  

DOE Green Energy (OSTI)

A computer program is described that can be used to design a fracture stimulation treatment for a geothermal reservoir. The program uses state-of-the-art methods to calculate the temperature of the fracture fluid as a function of time and distance in the fracture. This information is used to determine the temperature dependent properties of the fracture fluid. These fluid properties are utilized to calculate the fracture geometry as a function of time. The fracture geometry and temperature distribution of the fracture fluid are coupled so the subroutines that calculate these distributions have been made interactive.

Not Available

1980-05-01T23:59:59.000Z

303

Network design and defence  

E-Print Network (OSTI)

Goyal (2007), Jackson (2008) and Vega-Redondo (2007).3 A key issue is the robustness of networks to different types of shocks – natural and man made. This subject is relatively little studied. The contribution of our paper is to build on a classical... by the Designer must be connected. Observe that connectedness of the residual network can be guaranteed by a star network with 1 unit of defence assigned to the centre. This protected network has minimal number of links across all connected net- works and minimal...

Dziubi?ski, Marcin; Goyal, Sanjeev

2013-01-10T23:59:59.000Z

304

6 Nuclear Fuel Designs  

NLE Websites -- All DOE Office Websites (Extended Search)

Message from the Director Message from the Director 2 Nuclear Power & Researrh Reactors 3 Discovery of Promethium 4 Nuclear Isotopes 4 Nuclear Medicine 5 Nuclear Fuel Processes & Software 6 Nuclear Fuel Designs 6 Nuclear Safety 7 Nuclear Desalination 7 Nuclear Nonproliferation 8 Neutron Scattering 9 Semiconductors & Superconductors 10 lon-Implanted Joints 10 Environmental Impact Analyses 11 Environmental Quality 12 Space Exploration 12 Graphite & Carbon Products 13 Advanced Materials: Alloys 14 Advanced Materials: Ceramics 15 Biological Systems 16 Biological Systems 17 Computational Biology 18 Biomedical Technologies 19 Intelligent Machines 20 Health Physics & Radiation Dosimetry 21 Radiation Shielding 21 Information Centers 22 Energy Efficiency: Cooling & Heating

305

QA in Design Guidance  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9 9 U.S. DEPARTMENT OF ENERGY OFFICE OF ENVIRONMENTAL MANAGEMENT Guidance Document for Integrating Quality Assurance During the Design and Construction Life Cycle September 2011 Page 2 of 29 FOREWORD This Department of Energy (DOE) Environmental Management (EM) guidance document is approved for use by all DOE EM organizational units and contractors performing work for EM. A project's Quality Assurance Program assigns responsibilities and authorities, defines policies and requirements, and provides for the performance and assessment of work that provides confidence that required level of quality is achieved, commensurate with the various project requirements. This guidance document offers for evaluation, by project personnel from EM and contractor

306

Variables Influencing HRSG Designs  

E-Print Network (OSTI)

Heat Recovery Steam Generators (HRSG's) are widely used in chemical plants, refineries, incineration and cogeneration systems and in general for recovering energy from waste gas streams. In applications such as hydrogen or sulfuric acid plants, the duty and exit gas temperature from the HRSG are set by process considerations while the energy recovery potential in other applications is impacted by considerations of efficiency. In addition, low or high temperature corrosion, space availability, duty, size and maintenance aspects play a vital role in the design and sizing of HRSG's. This paper will address a few of the above considerations.

Ganapathy, V.; Rentz, J.

1990-06-01T23:59:59.000Z

307

Control system design method  

Science Conference Proceedings (OSTI)

A control system design method and concomitant control system comprising representing a physical apparatus to be controlled as a Hamiltonian system, determining elements of the Hamiltonian system representation which are power generators, power dissipators, and power storage devices, analyzing stability and performance of the Hamiltonian system based on the results of the determining step and determining necessary and sufficient conditions for stability of the Hamiltonian system, creating a stable control system based on the results of the analyzing step, and employing the resulting control system to control the physical apparatus.

Wilson, David G. (Tijeras, NM); Robinett, III, Rush D. (Tijeras, NM)

2012-02-21T23:59:59.000Z

308

MCFC PRODUCT DESIGN IMPROVEMENT  

SciTech Connect

This contract is supported by DOE and DOD/DARPA funds. The objective of the DOE program is to advance the direct carbonate fuel cell technology to a level suitable for commercial entry. The specific objectives of the DOD's initiative on 2 MW Fuel Cell Fixed Base Power Plant are: (A) to provide a detailed engineering design, development and cost estimate of the 2 MW fuel cell fixed base dual fuel power plant for DOD applications. Installation and operational support systems will also be developed. (B) To construct a full-size MW-class dual fuel power plant simulator.

Unknown

2000-01-01T23:59:59.000Z

309

Sharing tacit design knowledge in a distributed design environment  

E-Print Network (OSTI)

Throughout the life-cycle of a design project, architects rely heavily on their tacit design knowledge to support design decisions. Tacit knowledge is highly personal and implicit. As such, it encompasses expertise, intuitive understanding, and professional insight formed as a result of experience. Due to its implicit nature, tacit design knowledge is typically shared only among colleagues who work in the same office through face-toface interactions. With emerging Computer-Mediated Communication (CMC) technologies, designers face new opportunities for capturing and reusing tacit design knowledge. However, there is no accepted CMC strategy for sharing tacit design knowledge in the Architecture, Engineering, and Construction (AEC) industry. This research investigates the impact of tacit design knowledge on design performance in a distributed design environment supported by CMC software. The software was developed and tested in three design studios in which design students sought advice from experts in remote locations. It provides tools for showing images, such as drawings and renderings, and for engaging in a written dialogue (chat session). The written and graphic artifacts of the conversation are stored in a Web-accessible database. The chat sessions included the identification, clarification, and explanation of real problems. Dialogue records provide evidence of a significant influence upon the students� approach to conceptual design. Content analysis of the comments from the experts provides qualitative evidence for the software�s effectiveness. The participants shared past experience, professional recommendations, and intuitive expectations. In follow-up surveys, most participants reported that their experience with the software was very enjoyable and the software is well-designed to support sharing of design knowledge. This research also suggests that tacit design knowledge may be confidently captured and shared through careful strategic implementation of CMC technology in a distributed design environment. Demographic and attitudinal surveys of the participants suggest that enabling factors for sharing tacit design knowledge include knowledge sharing attitude, just-in-time expertise matching, and timing of the communication.

Woo, Jeong-Han

2005-08-01T23:59:59.000Z

310

Design and Drafting  

NLE Websites -- All DOE Office Websites (Extended Search)

Design & Drafting Work Request Form Design & Drafting Work Request Form Please complete and submit the following form to request service from the AES/D&D Group Please fill out this form as complete as possible. Please do not use any special characters such as / or \ use a dash -. Project Name: Project Division is for: AES ASD XSD BEAMLINE APS APS-Upgrade LCLS NSLS-II Specify the APS Division the Project will be built for. WBS: Requesting Engineer: Last Name First Name Requesters Badge Number: Requesters Phone: E-mail: @aps.anl.gov Requesters Group: AES-ADM AES-BC AES-BSC AES-CF AES-CS AES-CTL AES-DD AES-IS AES-IT AES-MED AES-MIS AES-MOM AES-PRO AES-SA AES-SI AES-UES ASD-ADM ASD-AP ASD-DIA ASD-IAG ASD-MD ASD-OA ASD-PS ASD-RF LCLS USR-APS XSD-ADM XSD-BTS XSD-CEP XSD-IXN XSD-MC XSD-MM XSD-OFM XSD-TRR XSD-UAS XSD-XMI XSD-XOR

311

Market Design Test Environments  

SciTech Connect

Power industry restructuring continues to evolve at multiple levels of system operations. At the bulk electricity level, several organizations charged with regional system operation are implementing versions of a Wholesale Power Market Platform (WPMP) in response to U.S. Federal Energy Regulatory Commission initiatives. Recently the Energy Policy Act of 2005 and several regional initiatives have been pressing the integration of demand response as a resource for system operations. These policy and regulatory pressures are driving the exploration of new market designs at the wholesale and retail levels. The complex interplay among structural conditions, market protocols, and learning behaviors in relation to short-term and longer-term market performance demand a flexible computational environment where designs can be tested and sensitivities to power system and market rule changes can be explored. This paper presents the use of agent-based computational methods in the study of electricity markets at the wholesale and retail levels, and distinctions in problem formulation between these levels.

Widergren, Steven E.; Sun, Junjie; Tesfatsion, Leigh

2006-06-18T23:59:59.000Z

312

CONCEPTUAL DESIGN REPORT  

Science Conference Proceedings (OSTI)

Brookhaven National Laboratory has prepared a conceptual design for a world class user facility for scientific research using synchrotron radiation. This facility, called the ''National Synchrotron Light Source II'' (NSLS-II), will provide ultra high brightness and flux and exceptional beam stability. It will also provide advanced insertion devices, optics, detectors, and robotics, and a suite of scientific instruments designed to maximize the scientific output of the facility. Together these will enable the study of material properties and functions with a spatial resolution of {approx}1 nm, an energy resolution of {approx}0.1 meV, and the ultra high sensitivity required to perform spectroscopy on a single atom. The overall objective of the NSLS-II project is to deliver a research facility to advance fundamental science and have the capability to characterize and understand physical properties at the nanoscale, the processes by which nanomaterials can be manipulated and assembled into more complex hierarchical structures, and the new phenomena resulting from such assemblages. It will also be a user facility made available to researchers engaged in a broad spectrum of disciplines from universities, industries, and other laboratories.

ROBINSON,K.

2006-12-31T23:59:59.000Z

313

System design visualizations for synthesizing intent specifications  

E-Print Network (OSTI)

Today's aerospace industry is faced not only with the challenges of developing spacecraft and supporting technologies to explore the unknown, but they must do so successfully with tighter budgets and fewer personnel. Mission ...

Chiesi Stephanie Sharo, 1977-

2004-01-01T23:59:59.000Z

314

Informing design decisions : an approach to corporate building design  

E-Print Network (OSTI)

This thesis is an investigation into design methodologies. How do we, as designers, prepare ourselves for decision making and evaluate our assumptions and decisions? The intent is to employ this information as a basis for ...

Maxwell, Marc A

1985-01-01T23:59:59.000Z

315

Teaching Design for Environment in Product Design Classes  

E-Print Network (OSTI)

The paper presents an approach to teaching design for environment (DFE) in the context of a product design and development course. The teaching method has been applied in our classes for graduate engineering, business, and ...

Baeriswyl, Michael C.

316

Probing the black box : experiments in design and design education  

E-Print Network (OSTI)

Conventional analysis and design methods based on preexisting methods and assumptions preconditions and limits the designer's level of engagement with the specific context that is under investigation. A structural analysis ...

Mulvey, Christopher P. (Christopher Paul), 1975-

2000-01-01T23:59:59.000Z

317

ATW neutronics design studies.  

SciTech Connect

The Accelerator Transmutation of Waste (ATW) concept has been proposed as a transuranics (TRU) (and long-lived fission product) incinerator for processing the 87,000 metric tonnes of Light Water Reactor used fuel which will have been generated by the time the currently deployed fleet of commercial reactors in the US reach the end of their licensed lifetime. The ATW is proposed to separate the uranium from the transuranics and fission products in the LWR used fuel, to fission the transuranics, to send the LWR and ATW generated fission products to the geologic repository and to send the uranium to either a low level waste disposal site or to save it for future use. The heat liberated in fissioning the transuranics would be converted to electricity and sold to partially offset the cost of ATW construction and operations. Options for incineration of long-lived fission products are under evaluation. A six-year science-based program of ATW trade and system studies was initiated in the US FY 2000 to achieve two main purposes: (1) ''to evaluate ATW within the framework of nonproliferation, waste management, and economic considerations,'' and (2) ''to evaluate the efficacy of the numerous technical options for ATW system configuration.'' This paper summarizes the results from neutronics and thermal/hydraulics trade studies which were completed at Argonne National Laboratory during the first year of the program. Core designs were developed for Pb-Bi cooled and Na cooled 840 MW{sub th} fast spectrum transmuter designs employing recycle. Additionally, neutronics analyses were performed at Argonne for a He cooled 600 MW{sub th} hybrid thermal and fast core design proposed by General Atomics Co. which runs critical for 3/4 and subcritical for 1/4 of its four year once-thin burn cycle. The mass flows and the ultimate loss of transuranic isotopes to the waste stream per unit of heat generated during transmutation have been calculated on a consistent basis and are compared. (Long-lived fission product incineration has not been considered in the studies reported here.)

Wade, D. C.; Yang, W. S.; Khalil, H.

2000-11-10T23:59:59.000Z

318

Experimental designs optimally balanced for trend  

Science Conference Proceedings (OSTI)

Keywords: BLKL exchange algorithm, BT algorithm, adjustment algorithm, design efficiency, optimum design, response surface, trend-free design

A. C. Atkinson; A. N. Donev

1996-11-01T23:59:59.000Z

319

Design and Drafting  

NLE Websites -- All DOE Office Websites (Extended Search)

AES / D&D Group Online AES / D&D Group Online Request for Information (RFI) Please complete and submit the following form. Please fill out this form as complete as possible. Project Name: Requested Response Date Requesting Designer: Any Available Alley. Reginald Andrist. John Bartkowiak. Neil Brown. Lloyd Davis. Brenda Downey. Josh Fallin. David Givens. Michelle Gunkelman. Patricia Grabinski. Tom Hibbard. Robert Jensen. Don Kalt. Robert Kirkus. Ed Lerch. Jason Mulvey. James O'Neill. Maria Pilar Panchal. Prakash Pasholk. Dan Poindexter. Nate Rocke. Benjamin Skiadopoulos. Denise Thompson. Kimberly Turner. Bill Walker. Karen Jo Respondent Engineer: Last Name First Name Requestors Phone: Importance Level: Time Holder Low Normal High URGENT Requestors E-mail: @aps.anl.gov Estimated Hours of Impact:

320

Extraction Utility Design Specification  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Extraction Extraction Utility Design Specification May 13, 2013 Document Version 1.10 1 Revision History Date Version Section and Titles Author Summary of Change January 15, 2010 1.0 All Eric Morgan, Dekker, Ltd. Initial Draft Document January 19, 2010 1.1 All Igor Pedan, Dekker, Ltd. Document update with EM team review notes January 20, 2010 1.2 2.1.1 EM Project Team Document Review January 27, 2010 1.3 All Bruce Bartells Final Draft Review May 10, 2010 1.4.1 2.8 Igor Pedan, Dekker, Ltd. Section Update May 14, 2010 1.4.2 2.3.1 Igor Pedan, Dekker, Ltd. System Tables Added May 17, 2010 1.4.3 2.3 Igor Pedan, Dekker, Ltd. Enhancements Update June 29, 2010 1.5 All Igor Pedan, Dekker, Ltd. Revised for Version

Note: This page contains sample records for the topic "refereed designation unknown" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Progress in ELENA Design  

E-Print Network (OSTI)

The Extra Low Energy Antiproton ring (ELENA) is a small ring at CERN which will be built to increase substantially the number of usable (or trappable) antiprotons delivered to experiments for studies with antihydrogen and antiprotonic nuclei. The report shows the progress in the ELENA design. The choice of optics and ring layout inside the AD hall is given. The main limitations for beam parameters at extraction like intra beam scattering and tune shift due to space charge are discussed. The electron cooler plays a key role in ELENA both for efficient deceleration as well as for preparing extracted beam with parameters defined by the experiments. The other important systems like beam vacuum, beam instrumentations and others are reviewed as well.

Bartmann, W; Breuker, H; Butin, F; Carli, C; Eriksson, T; Kersevan, R; Maury, S; Pasinelli, S; Tranquille, G; Vanbavinckhove, G; Oelert, W

2013-01-01T23:59:59.000Z

322

Cogeneration System Design Options  

E-Print Network (OSTI)

The commercial or industrial firm contemplating cogeneration at its facilities faces numerous basic design choices. The possibilities exist for fueling the system with waste materials, gas, oil, coal, or other combustibles. The choice of boiler, engine, turbine, generator, switchgear, and balance of plant can be bewildering. This paper presents an overview and a systematic approach to the basic system alternatives and attributes. The presentation illustrates how these options match the electrical and thermal needs of a firm, and what kind of operating economics and system paybacks have been achieved. Several cogeneration options are also illustrated to eliminate the problems and uncertainties of dealing with uninterested or non-cooperative utilities, as well as to minimize system costs.

Gilbert, J. S.

1985-05-01T23:59:59.000Z

323

Seal design alternatives study  

SciTech Connect

This report presents the results from a study of various sealing alternatives for the WIPP sealing system. Overall, the sealing system has the purpose of reducing to the extent possible the potential for fluids (either gas or liquid) from entering or leaving the repository. The sealing system is divided into three subsystems: drift and panel seals within the repository horizon, shaft seals in each of the four shafts, and borehole seals. Alternatives to the baseline configuration for the WIPP seal system design included evaluating different geometries and schedules for seal component installations and the use of different materials for seal components. Order-of-magnitude costs for the various alternatives were prepared as part of the study. Firm recommendations are not presented, but the advantages and disadvantages of the alternatives are discussed. Technical information deficiencies are identified and studies are outlined which can provide required information.

Van Sambeek, L.L. [RE/SPEC Inc., Rapid City, SD (US); Luo, D.D.; Lin, M.S.; Ostrowski, W.; Oyenuga, D. [Parsons Brinckerhoff Quade & Douglas, Inc., San Francisco, CA (US)

1993-06-01T23:59:59.000Z

324

Participatory design in emergency medical service: designing for future practice  

Science Conference Proceedings (OSTI)

We describe our research-its approach, results and products-on Danish emergency medical service (EMS) field or "pre-hospital" work in minor and major incidents. We discuss how commitments to participatory design and attention to the qualitative differences ... Keywords: Future Lab, emergency response, major incidents, medical response, minor incidents, participatory design, technology design, victim as boundary object, wireless biomonitor

Margit Kristensen; Morten Kyng; Leysia Palen

2006-04-01T23:59:59.000Z

325

Design and verification of high-speed VLSI physical design  

Science Conference Proceedings (OSTI)

With the rapid development of deep submicron (DSM) VLSI circuit designs, many issues such as time closure and power consumption are making the physical designs more and more challenging. In this review paper we provide readers with some recent progress ... Keywords: VLSI, buffer insertion, clock distribution, delay, floorplanning and placement, interconnect, order reduction, parameter extraction, physical design, power, power grid, wire sizing

Dian Zhou; Rui-Ming Li

2005-03-01T23:59:59.000Z

326

MCFC product design improvement  

Science Conference Proceedings (OSTI)

This contract is supported by DOE and DOD/DARPA funds. The objective of the DOE program is to advance the direct carbonate fuel cell technology to a level suitable for commercial entry. The specific objectives of the DOE's initiative on 2 MW Fuel Cell Fixed Base Power Plant are: (A) To provide a detailed engineering design, development and cost estimate of the 2 MW fuel cell fixed base dual fuel power plant for DOD applications. Installation and operational support systems will also be developed; and (B) To construct a full-size MW-class dual fuel power plant simulator. These objectives are planned to be achieved in the program coordinated with the Department of Energy, which has been funding a multiyear natural gas fueled direct fuel cell power plant program for civilian applications. Because many DARPA and DOE objectives are similar, the coordinated program activities are considered the most cost-effective for accomplishment of the program objectives. The DARPA/DOE joint program was launched in 1994. The DOE part of the program is expected to continue to the year 2000. The final output of this DOE program is to construct and operate a 2 MW power plant on an East Coast site. The site will be accessible to DOD energy/environmental systems base planners and logistics personnel as well as mission and policy planners to refine deployment configurations of this new power generation system for fixed base applications. A dual fuel fixed base design for military fuels operation, as well as support system logistics will be the key deliverables for the DARPA part of the program.

Unknown

1999-05-01T23:59:59.000Z

327

Contemporary Strategies for Sustainable Design  

E-Print Network (OSTI)

This exploratory research examined the degree of adoption and impact of the concepts of Building Information Model (BIM), Integrated Project Delivery (IPD), Integrated Design Process (IDP) and Building Energy Simulation (BES) on the design processes of advanced architectural firms when executing sustainable design. Six offices identified by the press for a strong commitment to sustainable design and influence in the design of high performance buildings were selected as cases. In semi-standardized interviews, these firms presented their perceptions of the influence of BIM, BES, and IPD/IDP. The results show that a generalization of sustainable design processes is possible. A design process for sustainability (DEPROSU) model was created by collecting best practices from data gathered from the interviews and the critical literature review. Secondary contributions show that BIM, IDP/IPD and BES have a synergistic effect in sustainable design methods, and that the human resource profile from these firms has evolved towards multi-skilled professionals knowledgeable in BES, BIM, parametric design, sustainability and construction processes. This research provides evidence of commonalities found in the design processes of the selected firms. These commonalities, which have been represented in the DEPROSU model, can potentially be validated as protocols or standards for sustainable design, providing architectural design practices with concrete patterns for improvement and or validation of their design methods.

Farias, Francisco

2013-05-01T23:59:59.000Z

328

Designing technology enhanced learning contexts  

Science Conference Proceedings (OSTI)

Through iterative participatory design-based research I aim to explore the application of the Ecology of Resources (EoR) Framework (Luckin, 2008) to the design of technology enhanced contexts that scaffold learning and collaboration. Technology enhanced ...

Joshua Underwood

2009-06-01T23:59:59.000Z

329

Magical experiences in interaction design  

Science Conference Proceedings (OSTI)

This paper is a description of design experiments performed to investigate the use of magical experiences in interaction design of consumer electronics. Magical experiences are usually associated with a passive audience watching a magician, but it is ...

Sam de Jongh Hepworth

2007-08-01T23:59:59.000Z

330

Environmental Design Space model assessment  

E-Print Network (OSTI)

The Environmental Design Space (EDS) is a multi-disciplinary design tool used to explore trade-offs among aircraft fuel burn, emissions, and noise. This thesis uses multiple metrics to assess an EDS model of a Boeing 777 ...

Spindler, Phillip Michael

2007-01-01T23:59:59.000Z

331

Design of mechanical arterial simulator  

E-Print Network (OSTI)

A force controlled ultrasound probe is being explored as a new method of measuring blood pressure. An arterial simulator was designed and built for experiments. For this simulator, the vessels and bulk material were designed ...

Chai, Lauren (Lauren Amy)

2012-01-01T23:59:59.000Z

332

Professional Ethics, System Design Methods  

E-Print Network (OSTI)

: today's approaches Ethics-related issue #12;Analysis Design Development Implementation (+ training analysis system Metadata management Context-sensitive warnings Methods to select best sources Spatial CAREFUL knowledge about risk traditional knowledge about risk #12;Analysis Design Development

Wright, Dawn Jeannine

333

Research experiments detailed design review  

DOE Green Energy (OSTI)

The illustrations for the detailed design review of the heliostats for a solar thermal pilot plant are presented. Also included are the program schedule, meeting agenda, and component design features. (MHR)

Not Available

1976-01-01T23:59:59.000Z

334

Design review report for the hydrogen interlock preliminary design  

DOE Green Energy (OSTI)

This report documents the completion of a preliminary design review for the hydrogen interlock. The hydrogen interlock, a proposed addition to the Rotary Mode Core Sampling (RMCS) system portable exhauster, is intended to support core sampling operations in waste tanks requiring flammable gas controls. The objective of this review was to validate basic design assumptions and concepts to support a path forward leading to a final design. The conclusion reached by the review committee was that the design was acceptable and efforts should continue toward a final design review.

Corbett, J.E.

1996-01-01T23:59:59.000Z

335

Position paper: Seismic design criteria  

SciTech Connect

The purpose of this paper is to document the seismic design criteria to be used on the Title 11 design of the underground double-shell waste storage tanks and appurtenant facilities of the Multi-Function Waste Tank Facility (MWTF) project, and to provide the history and methodologies for determining the recommended Design Basis Earthquake (DBE) Peak Ground Acceleration (PGA) anchors for site-specific seismic response spectra curves. Response spectra curves for use in design are provided in Appendix A.

Farnworth, S.K.

1995-05-22T23:59:59.000Z

336

FDH radiological design review guidelines  

SciTech Connect

These guidelines discuss in more detail the radiological design review process used by the Project Hanford Management Contractors as described in HNF-PRO-1622, Radiological Design Review Process. They are intended to supplement the procedure by providing background information on the design review process and providing a ready source of information to design reviewers. The guidelines are not intended to contain all the information in the procedure, but at points, in order to maintain continuity, they contain some of the same information.

Millsap, W.J.

1998-09-29T23:59:59.000Z

337

Transmission Structure Foundation Design Guide  

Science Conference Proceedings (OSTI)

This guide contains the most current and comprehensive information for the design of foundations for overhead line structures. The guide covers the complete transmission structure foundation design process from the subsurface investigations and design of the foundations, to the construction and inspection of the foundation. Reference documents to assist transmission structure foundation designers in the development of specifications such as for subsurface investigations and foundation construction ...

2012-11-28T23:59:59.000Z

338

Energy manager design for microgrids  

E-Print Network (OSTI)

refrigeration, space heating, water heating, and loads that can only be met by combustible Energy Manager Design

Firestone, Ryan; Marnay, Chris

2005-01-01T23:59:59.000Z

339

High Speed ADC Design Methodology  

E-Print Network (OSTI)

545. [11] Siqiang Fan, “High Speed ADC Design Techniques”,Fan, Xin Wang, Lin Lin, Qiang Fang, Jian Liu and Albert Wang, “DesignFan, Xin Wang, Lin Lin, Qiang Fang, Jian Liu, Bin Zhao and Albert Wang, “Capacitive Interpolated Flash ADC Design

Tang, He

2010-01-01T23:59:59.000Z

340

Emerging markets: design goes global  

Science Conference Proceedings (OSTI)

China and India represent two of the most rapidly evolving markets for IC design today. According to the CMP China IC Design Survey 2002, demand for IC design services in China is growing exponentially alongside 8- and 12-inch wafer fab construction. ...

Chi-Foon Chan; Deirdre Hanford; Jian Yue Pan; Narendra Shenoy; Mahesh Mehendale; A. Vasudevan; Shaojun Wei

2003-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "refereed designation unknown" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Spherical Torus Center Stack Design  

SciTech Connect

The low aspect ratio spherical torus (ST) configuration requires that the center stack design be optimized within a limited available space, using materials within their established allowables. This paper presents center stack design methods developed by the National Spherical Torus Experiment (NSTX) Project Team during the initial design of NSTX, and more recently for studies of a possible next-step ST (NSST) device.

C. Neumeyer; P. Heitzenroeder; C. Kessel; M. Ono; M. Peng; J. Schmidt; R. Woolley; I. Zatz

2002-01-18T23:59:59.000Z

342

Integrated Transportation System Design Optimization  

E-Print Network (OSTI)

Integrated Transportation System Design Optimization by Christine Taylor B.S. Cornell University by . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Professor Jaime Peraire Chairman, Department Graduate Committee #12;2 #12;Integrated Transportation System Abstract Traditionally, the design of a transportation system has focused on either the vehicle design

343

Metrics And The Software Designer  

E-Print Network (OSTI)

This paper will focus on these key topics in an effort to propose a means by which software designers can become effective contributors in the process of metrics collection analysis and reporting. METRICS AND THE SOFTWARE DESIGNER 4 2. KEY TOPICS FOR METRICS USAGE BY DESIGNERS

John T. Kalisz

1996-01-01T23:59:59.000Z

344

Extraction Utility Design Specification  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Extraction Utility Extraction Utility Design Specification January 11, 2011 Document Version 1.9 1 Revision History Date Version Section and Titles Author Summary of Change January 15, 2010 1.0 All Eric Morgan, Dekker, Ltd. Initial Draft Document January 19, 2010 1.1 All Igor Pedan, Dekker, Ltd. Document update with EM team review notes January 20, 2010 1.2 2.1.1 EM Project Team Document Review January 27, 2010 1.3 All Bruce Bartells Final Draft Review May 10, 2010 1.4.1 2.8 Igor Pedan, Dekker, Ltd. Section Update May 14, 2010 1.4.2 2.3.1 Igor Pedan, Dekker, Ltd. System Tables Added May 17, 2010 1.4.3 2.3 Igor Pedan, Dekker, Ltd. Enhancements Update June 29, 2010 1.5 All Igor Pedan, Dekker, Ltd. Revised for Version 8.0.20100628 July 14, 2010 1.5.1 2.8 Igor Pedan,

345

Designing superior incentive regulation  

SciTech Connect

The key to success in designing effective incentive regulation is relatively simple: Anticipate all of the incentives that will ultimately come to bear, and structure regulatory policy in advance to limit any adverse incentives. All is a critical word here. Attention commonly is focused on the incentives a proposed regulatory plan creates for the regulated firm to minimize production costs, diversify into new markets, and so on. While the incentives are important in assessing a regulatory plan, they are only one consideration. It is also critical to analyze the incentives the plan creates for other key players in the regulatory arena, particularly regulators. It is premature to draw any broad conclusions about the success of incentive regulation in the electric power and natural gas industries. While there is reason for optimism, concern remain. Some incentive regulation plans have been abandoned, in part because of: (1) unforeseen exogenous event that could not be administered within the confines of the plan; (2) public opposition to rewarding a utility for the superior performance it should have realized without the promise of financial reward; (3) adverse reaction to utility earnings in excess of those commonly authorized under traditional regulation, and (4) questions about the legality of the plans under state statutes.

Sappington, D.E.M.; Weisman, D.L.

1994-02-15T23:59:59.000Z

346

PULSE COLUMN DESIGN  

SciTech Connect

A stagewise approach was used in a theoretical analysis of pulse columns. In the analysis the column was arbitrarily divided into discrete stages comprising that part of the column between two adjacent perforated plates. The operation of the pulse column was described mathematically using material balance equations, and a design method was derived which used two stage lines and two operating lines, one set for the pulse generator upstroke and one set for the downstroke. Assuming equilibrium contact, the effect of recycle in a pulse column was shown to cause a large decrease in the separation obtained as the pulse frequency was increased. Hold-up studies were made using isoamyl alcohol- water, and methyl isobutyl ketone water. The hold-up per cycle of the dispersed phase for both systems was found to be equal to the interstage flow per cycle of the dispersed phase. Hold-up behavior at high frequencies was different for the two systems. Extraction runs were also made using the system methyl isobutyl ketone - acetic acid-water. The effects of recycle were found to result in a drop in column separation efficiency with increased pulse frequency. It was found to be theoretically possible for a column to operate in a pinched-in region even though this is not apparert from an examination of the superficial flow ratio of the two streams being fed to the column Techniques for sampling interstage flow streams in a colurm operating in the mixer-settler region are described. (J.R.D.)

Burkhart, L.E.; Fahien, R.W.

1958-11-01T23:59:59.000Z

347

MCFC PRODUCT DESIGN IMPROVEMENT  

SciTech Connect

The objective of the DOE program is to advance the direct carbonate fuel cell technology to a level suitable for commercial entry. The specific objectives of the DOD's initiative on 2 MW Fuel Cell Fixed Base Power Plant are: (1) To provide a detailed engineering design, development and cost estimate of the 2 MW fuel cell fixed base dual fuel power plant for DOD applications. Installation and operational support systems will also be developed. (2) To construct a full-size MW-class dual fuel power plant simulator. These objectives are planned to be achieved in the program coordinated with the Department of Energy, which has been funding a multiyear natural gas fueled direct fuel cell power plant program (DE-FC21-95MC31184) for civilian applications. Because many DARPA and DOE objectives are similar, the coordinated program activities are considered the most cost-effective for accomplishment of the program objectives. The DARPA/DOE joint program was launched in 1994. The DOE part of the program is expected to continue to Year 2000. The final output of this DOE program is to construct and operate a 2 MW power plant on an East Coast site. The site will be accessible to DOD energy/environmental systems base planners and logistics personnel as well as mission and policy planners to refine deployment configurations of this new power generation system for fixed base applications.

Unknown

2000-04-30T23:59:59.000Z

348

Tracking highly maneuverable targets with unknown behavior  

E-Print Network (OSTI)

for maneuvering target tracking,” IEEE Trans. Aerosp.converted measurements for tracking,” IEEE Trans. Aerosp.particle filters for tracking a maneuvering target,” in

Schell, C; Linder, S P; Zeidler, J R

2004-01-01T23:59:59.000Z

349

Detecting unknown network attacks using language models  

Science Conference Proceedings (OSTI)

We propose a method for network intrusion detection based on language models such as n-grams and words. Our method proceeds by extracting these models from TCP connection payloads and applying unsupervised anomaly detection. The essential part ...

Konrad Rieck; Pavel Laskov

2006-07-01T23:59:59.000Z

350

DETECTION OF KNOWN AND UNKNOWN NATURALLY ...  

Science Conference Proceedings (OSTI)

... contaminants. The predominant sources of halogenated secondary metabolites are sponges, algae and cyanobacteria. ...

351

Adding control to arbitrary unknown quantum operations  

E-Print Network (OSTI)

While quantum computers promise significant advantages, the complexity of quantum algorithms remains a major technological obstacle. We have developed and demonstrated an architecture-independent technique that simplifies adding control qubits to arbitrary quantum operations-a requirement in many quantum algorithms, simulations and metrology. The technique is independent of how the operation is done, does not require knowledge of what the operation is, and largely separates the problems of how to implement a quantum operation in the laboratory and how to add a control. We demonstrate an entanglement-based version in a photonic system, realizing a range of different two-qubit gates with high fidelity.

Xiao-Qi Zhou; Timothy C. Ralph; Pruet Kalasuwan; Mian Zhang; Alberto Peruzzo; Benjamin P. Lanyon; Jeremy L. O'Brien

2010-06-14T23:59:59.000Z

352

Optical Sensor for Unknown Gas Detection  

Giving animals in need a HOME. November 14, 2013. LLNL, Intel, ... Breath analysis for explosives or radiological exposure assessment in Homeland Security applications;

353

Quantum state estimation with unknown measurements  

E-Print Network (OSTI)

Improved measurement techniques are central to technological development and foundational scientific exploration. Quantum optics relies upon detectors sensitive to non-classical features of light, enabling precise tests of physical laws and quantum-enhanced technologies such as precision measurement and secure communications. Accurate detector response calibration for quantum-scale inputs is key to future research and development in these cognate areas. To address this requirement quantum detector tomography (QDT) has been recently introduced. However, the QDT approach becomes increasingly challenging as the complexity of the detector response and input space grows. Here we present the first experimental implementation of a versatile alternative characterization technique to address many-outcome quantum detectors by limiting the input calibration region. To demonstrate the applicability of this approach the calibrated detector is subsequently used to estimate non-classical photon number states.

Merlin Cooper; Michal Karpinski; Brian J. Smith

2013-06-27T23:59:59.000Z

354

Chemometric Characterization and Classification of Unknown ...  

Computers & Electronics; Enabled by the Office of Science. Security & Privacy | Contact PNNL. Last Update: February 2012 | Pacific Northwest ...

355

ORISE: Instructional Design and Development  

NLE Websites -- All DOE Office Websites (Extended Search)

Instructional Design and Development Instructional Design and Development The Oak Ridge Institute for Science and Education (ORISE) works with government agencies and organizations to create customized training and instructional design programs, from traditional classroom teaching to online education. ORISE uses a multi-step process to define the instructional design and development needs. Our process includes: Defining the target audience and objectives Designing and developing the program and materials Piloting, delivering and managing the training Evaluating the final product Whether a small- or large-scale effort, ORISE helps determine the most effective approach based on needs and resources, which may include: Collaborative experiences Interactive simulations Self-paced tutorials Guided instructions

356

Lighting Design | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Design Design Lighting Design July 29, 2012 - 6:28pm Addthis Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. | Photo courtesy of ©iStockphoto.com/chandlerphoto. Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. | Photo courtesy of ©iStockphoto.com/chandlerphoto. How does it work? Buy ENERGY STAR-rated lighting for the highest quality, energy-efficient lighting. Use timers and other controls to turn lights on and off. Use outdoor solar lighting. Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. If you're constructing a new house, consider lighting as part of your whole-house design -- an

357

Collocation Methods For Distillation Design  

E-Print Network (OSTI)

In this third paper on collocation methods for distillation design, we explore the use of the collocation models for design of simple distillation columns as well as flexible columns. Solvent recovery plants must deal with a wide range of feeds and still return pure solvents. The design problem we address is a single flexible column within the overall solvent recovery plant. We have developed the models and algorithms in the ASCEND system. We discuss the attributes and use of the ASCEND system. With ASCEND we can create complex models with simple building blocks and interactively learn to solve them. We found the collocation model an excellent tool for distillation design, allowing us to develop new concepts in design strategies. We designed a single column as would exist in a flexible solvent recovery plant for an azeotropic system. It was designed to handle three possible feeds, each with a distinct separation task. For each possible feed to a column, we approximate the operation of ...

Flexible Column; Robert S. Huss; Arthur W. Westerberg

1995-01-01T23:59:59.000Z

358

Optimization Online - Optimal Design of Electrical Machines ...  

E-Print Network (OSTI)

Jun 8, 2011 ... Optimal Design of Electrical Machines: Mathematical Programming ... Science and Engineering (Multidisciplinary Design Optimization ).

359

NEHRP - Earthquake Resistant Design Research Needs ...  

Science Conference Proceedings (OSTI)

Library. Research Needs Reports Earthquake Resistant Design. Earthquake Resistant Design. 2011. Research Plan for the ...

360

Conceptual design summary  

Science Conference Proceedings (OSTI)

The Advanced Neutron Source (ANS) is a new basic and applied research facility based on a powerful steady-state research reactor that provides beams of neutrons for measurements and experiments in the fields of materials science and engineering, biology, chemistry, materials analysis, and nuclear science. The useful neutron flux for these experiments will be at least five times, and in some cases twenty times, more than is available at the world's best existing facilities. In addition, ANS will provide irradiation capabilities for the production of radioisotopes for medical applications, research, and industry and facilities for materials irradiation testing. The need for a new steady-state neutron research facility in the United States was emphasized by the 1984 National Academy Report and confirmed by the Department of Energy's (DOE's) Energy Research Advisory Board in 1985. These studies defined a minimum thermal neutron flux requirement of 5 {times} 10{sup 19} m{sup {minus}2} {center dot} s{sup {minus}1}. The National Steering Committee for an Advanced Neutron Source, with representation from the major fields of science that will use the facility, was established in 1986 and has continued to define the performance requirements and instrument layouts needed by the user community. To minimize technical risks and safety issues, the project adopted a policy of not relying upon new inventions to meet the minimum performance criteria, and the design presented in this report is built on technologies already used in other facilities and development programs: for example, the involute aluminum-clad fuel plates common to HFIR and ILL and the uranium silicide fuel developed in DOE's Reduced Enrichment for Research and Test Reactors program and tested in reactors worldwide. At the same time, every state-of-the-art technique has been implemented to optimize neutron beam delivery at the experiments.

Peretz, F.J.

1992-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "refereed designation unknown" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Conceptual design summary  

Science Conference Proceedings (OSTI)

The Advanced Neutron Source (ANS) is a new basic and applied research facility based on a powerful steady-state research reactor that provides beams of neutrons for measurements and experiments in the fields of materials science and engineering, biology, chemistry, materials analysis, and nuclear science. The useful neutron flux for these experiments will be at least five times, and in some cases twenty times, more than is available at the world`s best existing facilities. In addition, ANS will provide irradiation capabilities for the production of radioisotopes for medical applications, research, and industry and facilities for materials irradiation testing. The need for a new steady-state neutron research facility in the United States was emphasized by the 1984 National Academy Report and confirmed by the Department of Energy`s (DOE`s) Energy Research Advisory Board in 1985. These studies defined a minimum thermal neutron flux requirement of 5 {times} 10{sup 19} m{sup {minus}2} {center_dot} s{sup {minus}1}. The National Steering Committee for an Advanced Neutron Source, with representation from the major fields of science that will use the facility, was established in 1986 and has continued to define the performance requirements and instrument layouts needed by the user community. To minimize technical risks and safety issues, the project adopted a policy of not relying upon new inventions to meet the minimum performance criteria, and the design presented in this report is built on technologies already used in other facilities and development programs: for example, the involute aluminum-clad fuel plates common to HFIR and ILL and the uranium silicide fuel developed in DOE`s Reduced Enrichment for Research and Test Reactors program and tested in reactors worldwide. At the same time, every state-of-the-art technique has been implemented to optimize neutron beam delivery at the experiments.

Peretz, F.J.

1992-09-01T23:59:59.000Z

362

Promoting Learning of Instructional Design via Overlay Design Tools  

E-Print Network (OSTI)

Design Rationale Systems .. 19 Educational & Instructionaldesign and evolution of this system, focusing on how it was crafted to help novice instructional

Carle, Andrew Jacob

2012-01-01T23:59:59.000Z

363

Graphic Design, Media and Communications  

NLE Websites -- All DOE Office Websites (Extended Search)

Graphic Design Graphic Design Note: Graphic Design services are available at no charge to BNL and Guest users. There is a charge for laminating and/or mounting of printed posters The Graphic Design Studio is located to the second floor in the north wing of the Research Support Building 400. The telephone number is Ext. 7288. If you have any questions, please call supervisor, Rick Backofen, Ext. 6183. As graphic designers, one of the things we do best, is to solve complex problems using our ability to make ideas visible, culturally, aesthetically and economically. Our work includes a wide range of printed documents and presentation products. We will coordinate the technical aspects of the project and provide a production schedule to meet your requirements. Design

364

NREL: Computational Science - Inverse Design  

NLE Websites -- All DOE Office Websites (Extended Search)

Inverse Design Inverse Design The NREL Computational Science Center collaborates with the High Throughput and Inverse Band Structure (HT/IBS) Group within the Center for Inverse Design (CID) to research, design, and create materials with given target properties. The Center for Inverse Design is an Energy Frontier Research Center of the U.S. Department of Energy Office of Science. To address a crucial scientific grand challenge, the Center is pursuing a new approach to material science. Rather than using the conventional direct approach ("Given the structure, find the electronic properties"), we are using a "materials by inverse design" approach ("Given the desired property, find the structure"). Illustration of a blue arrow pointing to a graphic with three curved lines that represent an electronic structure and blue arrow pointing to a red and blue balls that represent an atomic configuration.

365

Design Team | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Design Team Design Team Design Team October 16, 2013 - 5:17pm Addthis Key Actions in Selecting a Design Team Work with project energy lead to include renewable energy provisions when procuring architectural and engineering services. List specific requirements, including: Energy-related requirements from building program. In-depth energy efficiency and renewable expertise on team. Ability to integrate renewable energy and custom control strategies into energy modeling. An integrated design process and coordination with other contractors. History of verifying building performance. Determine selection criteria ahead of the RFP, including the ability to judge on best-value versus lowest-cost. Create design review team across disciplines, including project energy lead, commissioning agent, and

366

Optimal experiment design for time-lapse traveltime tomography  

SciTech Connect

Geophysical monitoring techniques offer the only noninvasive approach capable of assessing both the spatial and temporal dynamics of subsurface fluid processes. Increasingly, permanent sensor arrays in boreholes and on the ocean floor are being deployed to improve the repeatability and increase the temporal sampling of monitoring surveys. Because permanent arrays require a large up-front capital investment and are difficult (or impossible) to re-configure once installed, a premium is placed on selecting a geometry capable of imaging the desired target at minimum cost. We present a simple approach to optimizing downhole sensor configurations for monitoring experiments making use of differential seismic traveltimes. In our case, we use a design quality metric based on the accuracy of tomographic reconstructions for a suite of imaging targets. By not requiring an explicit singular value decomposition of the forward operator, evaluation of this objective function scales to problems with a large number of unknowns. We also restrict the design problem by recasting the array geometry into a low dimensional form more suitable for optimization at a reasonable computational cost. We test two search algorithms on the design problem: the Nelder-Mead downhill simplex method and the Multilevel Coordinate Search algorithm. The algorithm is tested for four crosswell acquisition scenarios relevant to continuous seismic monitoring, a two parameter array optimization, several scenarios involving four parameter length/offset optimizations, and a comparison of optimal multi-source designs. In the last case, we also examine trade-offs between source sparsity and the quality of tomographic reconstructions. One general observation is that asymmetric array lengths improve localized image quality in crosswell experiments with a small number of sources and a large number of receivers. Preliminary results also suggest that high-quality differential images can be generated using only a small number of optimally positioned sources.

Ajo-Franklin, J.B.

2009-10-01T23:59:59.000Z

367

REC Tracking Systems Design Guide  

DOE Green Energy (OSTI)

OAK-B135 The Design Guide is presented in three parts. Section II describes the need for REC tracking, the two principal tracking methods available, and, in simple terms, the operation of certificate-based systems. Section III presents the major issues in the design of certificate-based tracking systems and discusses the advantages and disadvantages of alternative solutions. Finally, Section IV offers design principles or recommendations for most of these issues.

Meredith Wingate

2004-02-03T23:59:59.000Z

368

Duke Edwardsport Generic Design Specification  

Science Conference Proceedings (OSTI)

This generic design specification (GDS) is sponsored by the CoalFleet for Tomorrow program of the Electric Power Research Institute (EPRI). The CoalFleet Integrated Gasification Combined Cycle (IGCC) Design Guidelines Experts Group produced this report, which is based on available public sources and information. The CoalFleet IGCC Design Guidelines Experts Group consists of more than 10 IGCC experts, including independent consultants and EPRI staff.

2011-01-20T23:59:59.000Z

369

COLD STORAGE DESIGN REFRIGERATION EQUIPMENT  

E-Print Network (OSTI)

COLD STORAGE DESIGN AND REFRIGERATION EQUIPMENT REFRIGERATION OF FISH - PART 1 \\ "..\\- ,,, T I Fishery Leaflet 427 Washington 25, D. C. June 1956 REFRIGERATION OF FISH - PART em; COlD STORAGE DESIGN · · · · · 18 Specific design features 0 0 · · · · · · · · · · · · · · 19 Refrigerated surfaces 0 · · 0 0 0 · 0

370

Transmission Line Design and Construction  

Science Conference Proceedings (OSTI)

The power industry wants to construct reliable and cost-effective overhead lines. A reliable and cost effective line requires not only that the line and structures meet design criteria for strength, clearances, and electrical considerations, but also that it be designed for safe and easy construction and maintenance. Design and construction practices should therefore go hand in hand. Information among various departments within a utility has to be shared for mutual benefit. Communication is a key ...

2012-12-31T23:59:59.000Z

371

GCFR steam generator conceptual design  

SciTech Connect

The gas-cooled fast reactor (GCFR) steam generators are large once-through heat exchangers with helically coiled tube bundles. In the GCFR demonstration plant, hot helium from the reactor core is passed through these units to produce superheated steam, which is used by the turbine generators to produce electrical power. The paper describes the conceptual design of the steam generator. The major components and functions of the design are addressed. The topics discussed are the configuration, operating conditions, design criteria, and the design verification and support programs.

Holm, R.A.; Elliott, J.P.

1980-01-01T23:59:59.000Z

372

Manufacturer's Mixed Pallet Design Problem  

E-Print Network (OSTI)

fore, the company decided to design a number of mixed or “rainbow” pallets so that its customers can order ...... Squeezing out waste of space. 62, 5, page 112.

373

NREL: Technology Deployment - Microgrid Design  

NLE Websites -- All DOE Office Websites (Extended Search)

Microgrid Design Microgrid Design Photo of a microgrid test site at the National Wind Technology Center. NREL designs independent electrical generation and distribution systems called microgrids, which deliver energy that is reliable, economical, and sustainable. NREL experts work with military, government, industry, and other organizations that cannot afford to lose power to develop reliable and cost-effective microgrid systems. Expertise and Knowledge NREL offers microgrid technical expertise and project support that includes engineering, energy analysis and modeling, financial analysis, and energy management. Our comprehensive and innovative approach to microgrid design is called Continuously Optimized Reliable Energy (CORE) Microgrids. The CORE microgrid approach includes advantages such as:

374

METHODOLOGY FOR DEVELOPMENT OF DESIGN ...  

Science Conference Proceedings (OSTI)

... was also proposed for developing design criteria based on ... loss of power due to wind induced damage to transmission tower or power line ...

2010-12-13T23:59:59.000Z

375

Design of lightweigh electric vehicles.  

E-Print Network (OSTI)

??The design and manufacture of lightweight electric vehicles is becoming increasingly important with the rising cost of petrol, and the effects emissions from petrol powered… (more)

de Fluiter, Travis

2008-01-01T23:59:59.000Z

376

System, Stack and Component Design  

Science Conference Proceedings (OSTI)

Oct 17, 2011 ... Energy Conversion/Fuel Cells: System, Stack and Component Design ... In fuel cell mode it produces electricity and heat from hydrogen, and in ...

377

ColdDesignGuide.indd  

NLE Websites -- All DOE Office Websites (Extended Search)

orientation, window area, and shading strategies for homes in Minneapolis, Minnesota. The energy use was calculated for many window design variations including 5 orientations, 3...

378

Design Fires for Structures Project  

Science Conference Proceedings (OSTI)

... eg, ISO 834), or prescribed, non-standard heating rates (provided by oil-burners). ... the design of the fuel delivery system (eg, natural gas burners) to ...

2013-11-13T23:59:59.000Z

379

Solar lumber kilns: design ideas  

DOE Green Energy (OSTI)

A solar kiln and its advantages are described. Drying fundamentals, design factors, and economics are discussed. Three operating solar kilns are described.

Robbins, A. M.

380

Bake Oven Design and Improvement  

Science Conference Proceedings (OSTI)

Mar 13, 2012 ... Electrode Technology for Aluminium Production: Bake Oven Design and ... from shaft calciners is recovered for heating coal tar pitch and power ...

Note: This page contains sample records for the topic "refereed designation unknown" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Material-based design computation  

E-Print Network (OSTI)

The institutionalized separation between form, structure and material, deeply embedded in modernist design theory, paralleled by a methodological partitioning between modeling, analysis and fabrication, resulted in ...

Oxman, Neri

2010-01-01T23:59:59.000Z

382

Design Factors That Influence Corrosion  

Science Conference Proceedings (OSTI)

Table 3   Corrosion factors that can influence design considerations...Inhibitors Inspection Planned maintenance Source: Ref 25...

383

Fully Integrating the Design Process  

SciTech Connect

The basic approach to designing nuclear facilities in the United States does not currently reflect the routine consideration of proliferation resistance and international safeguards. The fully integrated design process is an approach for bringing consideration of international safeguards and proliferation resistance, together with state safeguards and security, fully into the design process from the very beginning, while integrating them sensibly and synergistically with the other project functions. In view of the recently established GNEP principles agreed to by the United States and at least eighteen other countries, this paper explores such an integrated approach, and its potential to help fulfill the new internationally driven design requirements with improved efficiencies and reduced costs.

T.A. Bjornard; R.S. Bean

2008-03-01T23:59:59.000Z

384

PL FINAL DESIGN REPORT. VOLUME I. PLANT DESIGN  

SciTech Connect

The plant design for PL-2, a 1000-kw net electric direct cycle boiling water nuclear power plant, is presented. The design includes all buildings, foundations, and structures required for the installation of the plant in a snow tunnel. (M.C.G.)

1961-06-30T23:59:59.000Z

385

Computer Aided Design Tool for Electric, Hybrid Electric and Plug-in Hybrid Electric Vehicles  

E-Print Network (OSTI)

This research is focused on designing a new generation of CAD tools that could help a ”hybrid vehicle” designer with the design process to come up with better vehicle configurations. The conventional design process for any type of hybrid-electric vehicle would start from the vehicle performance criteria and continue by applying them to the physical models of di?erent components of the vehicle. The final result would be strict and precise characteristics of all components in the vehicle; this scenario gives only one option for the desired vehicle. A new perspective is introduced in developing a new methodology in the art of design. This new method enables the designer to see a wider picture of what he is designing and have access to all his options and capabilities. The method is designed to help the designer ask the right questions about his design options, intelligently guide him through the design process by squeezing the space of solutions and take him to the final designed product. The new methodology is implemented in this research with the following capabilities: 1. The proposed tool allows the designer to choose any arbitrary set of variable to be known and leave the rest as the ones to be solved for; either they are vehicle component characteristic variables or performance measures. This provides a great amount of flexibility and success in designing a vehicle from any available information about it. 2. Instead of starting from single values, the new tool can work with a range of possible values for the known variables and suggest range of feasible values for the unknown variables. This provides the capability of refining the design even further and performing sensitivity analysis. 3. The proposed tool is a package that o?ers both design and simulation capabilities. It includes analytical performance simulation as well as simulation with arbitrary drive cycles and engine controllers. 4. Capability of 1D, 2D and 3D representation of any arbitrary set of design variables in the solution space. The idea is implemented in a pilot version software package for vehicle design.

Eskandari Halvaii, Ali

2011-05-01T23:59:59.000Z

386

Electric-powered passenger vehicle design study program. Task 1. Tradeoff studies  

DOE Green Energy (OSTI)

Using the baseline vehicle and power system design established previously to meet the performance goals of the program, three power system computer simulation programs were prepared for the basic vehicle tradeoff studies. These programs simulate the performance of the power system and vehicle over different types of driving conditions such as maximum power acceleration, deceleration, city driving cycles, and hill climbing, and permit accurate determination of the benefits of the unique hybrid power system, the total energy required for the suburban city driving cycle, and the extremes of the operating envelopes of the components so that component design options can be defined and studied. Component design tradeoff studies were conducted, including sensitivity studies to show the criticality of the various losses and unknowns in the analytical models. Also, preliminary vehicle layout studies were performed to determine the best locations of the power system and the batteries. Three basic design options are identified for further study. Economic studies were initiated using analytical models to establish the complete vehicle weight and cost breakdowns. Preliminary reliability and safety studies were completed, and maintainability and safety certification criteria established. The detailed analysis of the power system has verified the feasibility of the system and of the performance expectations. Also, the feasibility of energy recovery from regenerative braking has been confirmed. The sensitivity analysis of the power system shows that sufficient margin for unknown design variables is provided. The preliminary economic analysis indicates that the most difficult objective of the study will be the selection of the cost and weight relationships which are required to achieve the overall cost objectives.

Rowlett, B.H.

1976-09-16T23:59:59.000Z

387

Active solar thermal design manual  

SciTech Connect

This manual is aimed at systems design engineers, architects, system supplier/installers, and contractor/builders. Practical information for both skilled and inexperienced designers. Solar thermal applications focuses on residential and commercial space heating, potable hot water heating, process water heating, and space cooling.

1985-01-01T23:59:59.000Z

388

Optimal designs for conjoint experiments  

Science Conference Proceedings (OSTI)

In conjoint experiments, each respondent receives a set of profiles to rate. Sometimes, the profiles are expensive prototypes that respondents have to test before rating them. Designing these experiments involves determining how many and which profiles ... Keywords: Conjoint experiments, D-optimality, Optimal block design, Optimal block sizes, Prototype testing

Roselinde Kessels; Peter Goos; Martina Vandebroek

2008-01-01T23:59:59.000Z

389

Suicide effects: designing for death  

Science Conference Proceedings (OSTI)

This paper presents design ideas and suggestions for digital signage systems within the Tokyo transportation system to create and nurture social and community engagement around the phenomena of train suicide. This method of taking one's own life is widespread ... Keywords: death, design, public display, social media, suicide, transport, urban information systems

Jan Rod; Connor Graham; Martin Gibbs

2011-06-01T23:59:59.000Z

390

Design of a neighborhood pathfinder  

Science Conference Proceedings (OSTI)

Everyone understands their city in a slightly different way. This project seeks to leverage these differences by allowing people to share their understandings and compile a visual social history of the city.Most wayfinding systems are designed around ... Keywords: GPS, context-aware computing, handheld devices and mobile computing, interaction design, prototyping, user research, wayfinding

Jeff Howard; Jodi Forlizzi

2005-11-01T23:59:59.000Z

391

MINIMARS conceptual design: Final report  

DOE Green Energy (OSTI)

This volume contains the following sections: (1) fueling systems; (2) blanket; (3) alternative blanket concepts; (4) halo scraper/direct converter system study and final conceptual design; (5) heat-transport and power-conversion systems; (6) tritium systems; (7) minimars air detritiation system; (8) appropriate radiological safety design criteria; and (9) cost estimate. (MOW)

Lee, J.D. (ed.)

1986-09-01T23:59:59.000Z

392

Contemporary data path design optimization  

E-Print Network (OSTI)

power consumption, instead of performance, becomes the most critical concern in many data-path designs, especially for mobile devicePower consumption becomes more critical issue than performance in modern data-path designs, especially for mobile devicepower consumption. Furthermore, we also implement the PST algorithm on both ASIC and FPGA devices

Liu, Jianhua

2006-01-01T23:59:59.000Z

393

MSc Design of Rotating Machines  

E-Print Network (OSTI)

design management and intellectual skills of communication in a group working environment. Focus on your interests The Machine Design specialism aims to provide students with a greater degree of training of stress analysis, machine dynamics, transmissions, computer aided engineering, and project management

394

Nuclear power plant design analysis  

SciTech Connect

Information concerning the engineering aspects of the design of commercial nuclear power plants is presented. Topics discussed include: electric utility economics; nuclear plant cconomics; thermal-transport systems and core design; nuclear analysis methods; safcty requirements; fuel-system analysis; dcsign considerations; and optimization approaches. (DCC)

Sesonske, A.

1973-01-01T23:59:59.000Z

395

Design review report for multiport riser final design review  

DOE Green Energy (OSTI)

This design review examined the design documents contained in a notebook prepared for the final design review of the multiport riser assembly. This assembly will support the Hydrogen Mitigation Test program for mitigation of safety issues for Hanford Waste Tank 241-SY-101. The purpose of the Multiport Riser is to provide multiple access ports of several diameters in a single 42 inch riser for simultaneous access of test and support equipment. The notebook was titled: {open_quotes}Multiport Riser Final Design Review.{close_quotes} The review was conducted using a database comment registration system whereby the reviewer comments were entered into the database and each comment was given a unique identifier. During the review, each comment was referred to by its identifier. Changes to comments, responses, and actions needed were made with the agreement of the committee and the reviewers at the formal design review meeting held March 1, 1994. When the structural analyses were available, they were distributed for review which allowed closure of all design review comments. Approval of the design was achieved and supporting documents are included in this report.

McWethy, L.M.; Sheen, E.M.

1994-05-01T23:59:59.000Z

396

NSLS-II Design and Performance  

NLE Websites -- All DOE Office Websites (Extended Search)

NSLS-II Design & Performance NSLS-II CD-0 Proposal Preliminary Design Report (PDR) Conceptual Design Report (CDR) Source Properties (.pdf) Cell section Last Modified: April 2,...

397

design | OpenEI Community  

Open Energy Info (EERE)

design design Home Dc's picture Submitted by Dc(15) Member 17 September, 2013 - 12:39 Are you willing to reply to a text message once a day with information about your comfort level at your indoor location? building comfort design improve incentive indoor message sms text Yes 60% (3 votes) No 0% (0 votes) Maybe if I had an incentive 20% (1 vote) Maybe if my reply is confidential and anonymous 0% (0 votes) Maybe if the data will be used to improve building design 20% (1 vote) Total votes: 5 Buildings account for roughly 40% of all U.S. energy use (70% of all electricity): residential buildings account for 22% of all U.S. energy use and commercial buildings account for 18% of all U.S. energy use[i]. There is an unanswered need for information about buildings in use and how building design affects building occupant comfort, productivity, and, by

398

Integrated design : a generative multi-performative design approach  

E-Print Network (OSTI)

There are building systems, called "modularized", in which the component systems (for structure, lighting, etc) can be analyzed and synthesized independently since their performance and design do not interact or affect one ...

Fasoulaki, Eleftheria

2008-01-01T23:59:59.000Z

399

A ROBUST TOPOLOGICAL PRELIMINARY DESIGN EXPLORATION METHOD WITH MATERIALS DESIGN  

E-Print Network (OSTI)

­ Volume ­ Cost ­ Performance · Balance-of-plant (BOP) components ­ Weight ­ Cost ­ Availability, and composite layup · Measure tank strength and fatigue life #12;Track 1: Optimization of materials & design

400

Designing for recombination: process design through template combination  

Science Conference Proceedings (OSTI)

Process design remains an important yet difficult concern for postindustrial organizations. We posit that processes ‘become' processes in these organizations only via their anchoring in concrete artifacts. Consequently, we identify and refine two ... Keywords: artifacts, business process, granularity, recombination, templates

Arvind Karunakaran; Sandeep Purao

2012-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "refereed designation unknown" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Secondary Containment Design for a  

E-Print Network (OSTI)

Secondary containment for high speed rotating machinery, such as a centrifuge, is extremely important for operating personnel safety. Containment techniques can be very costly, ungainly and time consuming to construct. A novel containment concept is introduced which is fabricated out of modular sections of polycarbonate glazed into a Unistrut metal frame. A containment study for a high speed centrifuge is performed which includes the development of parameters for secondary containment design. The Unistrut/polycarbonate shield framing concept is presented including design details and proof testing procedures. The economical fabrication and modularity of the design indicates a usefulness for this shielding system in a

High Speed Centrifuge; Keith W. Snyder

1999-01-01T23:59:59.000Z

402

Energy-conserving site design  

SciTech Connect

Information useful to landscape architects, architects, planners, engineers, students, and homeowners is presented. The concepts and examples needed to create more energy-efficient landscapes are described. The book is organized into five sections, including: an overview and history of energy-efficient design research; detailed information and new strategies on site analysis and planning; energy-efficient landscape design of clustered and single residences; alternative energy-conserving scenarios for the future; and appendices. The appendices contain such technical information as: lists of energy-conserving design options, formulas to calculate solar radiation and soil temperatures, tools for climatic analysis, and techniques for precision planting for solar control and access.

McPherson, E.G. (ed.)

1984-01-01T23:59:59.000Z

403

Test Requirements and Conceptual Design for a Potassium Test Loop to Support an Advanced Potassium Rankine Cycle Power Conversion Systems  

SciTech Connect

Parameters for continuing the design and specification of an experimental potassium test loop are identified in this report. Design and construction of a potassium test loop is part of the Phase II effort of the project ''Technology Development Program for an Advanced Potassium Rankine Power Conversion System''. This program is supported by the National Aeronautics and Space Administration. Design features for the potassium test loop and its instrumentation system, specific test articles, and engineered barriers for ensuring worker safety and protection of the environment are described along with safety and environmental protection requirements to be used during the design process. Information presented in the first portion of this report formed the basis to initiate the design phase of the program; however, the report is a living document that can be changed as necessary during the design process, reflecting modifications as additional design details are developed. Some portions of the report have parameters identified as ''to be determined'' (TBD), reflecting the early stage of the overall process. In cases where specific design values are presently unknown, the report attempts to document the quantities that remain to be defined in order to complete the design of the potassium test loop and supporting equipment.

Yoder, JR.G.L.

2006-03-08T23:59:59.000Z

404

Sandia National Labs: PCNSC: Partnering: Designated Capabilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Partnerships Research Partnering Designated Capabilities The "Physical, Chemical, and Nano Sciences Designated Capabilities" 'umbrella' agreement, approved by the Department of...

405

Abstract: Experiment Design for Scientists and Engineers  

Science Conference Proceedings (OSTI)

Education and Training: Experiment Design for Engineers and ... Experiment design is a systematic, rigorous, data-based approach to scientific ...

2013-10-30T23:59:59.000Z

406

Design methods for ethical persuasive computing  

Science Conference Proceedings (OSTI)

Value Sensitive Design and Participatory Design are two methodological frameworks that account for ethical issues throughout the process of technology design. Through analysis and case studies, this paper argues that such methods should be applied to ... Keywords: design methods, participatory design, persuasive technology, value sensitive design

Janet Davis

2009-04-01T23:59:59.000Z

407

Standards, Open Systems and Design  

E-Print Network (OSTI)

• “Design is the fundamental soul of a humanmade creation that ends up expressing itself in successive outer layers of the product or service. ”-Steve Jobs From the presentation of: Fumiko Ichikawa, Innovation Lab,

Ken Krechmer

2011-01-01T23:59:59.000Z

408

Premium Power Industrial Park Design  

Science Conference Proceedings (OSTI)

This report is intended to provide insights on the consideration, design, and implementation of power quality (PQ) parks -- business parks where superb electric power quality, reliability, and availability (QRA) are optimized for the businesses within the park.

2002-02-14T23:59:59.000Z

409

The Design of RELAX NG  

E-Print Network (OSTI)

RELAX NG is a new schema language for XML. This paper discusses various aspects of the design of RELAX NG including the treatment of attributes, datatyping, mixed content, unordered content namespaces, cross-references and modularity.

James Clark

2001-01-01T23:59:59.000Z

410

Slow Technology – Designing for Reflection  

Science Conference Proceedings (OSTI)

As computers are increasingly woven into the fabric of everyday life, interaction design may have to change – from creating only fast and efficient tools to be used during a limited time in specific situations, to creating technology that surrounds ...

Lars Hallnäs; Johan Redström

2001-01-01T23:59:59.000Z

411

Additive Manufacturing - Materials by Design  

Livermore materials scientists and engineers are designing and building new materials that will open up new spaces on many Ashby material selection charts, such as those for stiffness and density as well as thermal expansion and stiffness. This is ...

412

Basic EETD Web Page Design  

NLE Websites -- All DOE Office Websites (Extended Search)

Basic EETD Web Page Design Speaker(s): Eve Edelson Date: May 27, 2005 - 12:00pm Location: Bldg. 90 Seminar HostPoint of Contact: Allan Chen This talk will provide information...

413

Tritium Recycling (Processing) Facility Design  

Science Conference Proceedings (OSTI)

Design, Operation, and Maintenance of Tritium System / Proceedings of the Fifth Topical Meeting on Tritium Technology In Fission, Fusion, and Isotopic Applications Belgirate, Italy May 28-June 3, 1995

Jack Metzler; Thuy Le

414

Designing cities for the elderly  

E-Print Network (OSTI)

This thesis seeks to answer how urban design in an established town can be adapted to accommodate an aging population. It uses the town of Brookline, Massachusetts, as an example of a community making active efforts to ...

Lee, David, M.C.P. Massachusetts Institute of Technology

2007-01-01T23:59:59.000Z

415

Weelchair exercise roller product design  

E-Print Network (OSTI)

Inspired by bicycle training rollers, a wheelchair exercise roller (an exercise machine for the application of wheelchair users) was designed from conception of idea to alpha prototype. Background and market data was ...

Su, Benjamin W

2005-01-01T23:59:59.000Z

416

Implementing Safeguards-by-Design  

Science Conference Proceedings (OSTI)

Executive Summary Excerpt Safeguards-by-Design (SBD) is an approach to the design and construction of nuclear facilities whereby safeguards are designed-in from the very beginning. It is a systematic and structured approach for fully integrating international and national safeguards (MC&A), physical security, and other proliferation barriers into the design and construction process for nuclear facilities. SBD is primarily a project management or project coordination challenge, and this report focuses on that aspect of SBD. The present report continues the work begun in 2008 and focuses specifically on the design process, or project management and coordination - the planning, definition, organization, coordination, scheduling and interaction of activities of the safeguards experts and stakeholders as they participate in the design and construction of a nuclear facility. It delineates the steps in a nuclear facility design and construction project, in order to provide the project context within which the safeguards design activities take place, describes the involvement of safeguards experts in the design process, the nature of their analyses, interactions and decisions, as well as describing the documents created and how they are used. Designing and constructing a nuclear facility is an extremely complex undertaking. The stakeholders in an actual project are many – owner, operator, State regulators, nuclear facility primary contractor, subcontractors (e.g. instrument suppliers), architect engineers, project management team, safeguards, safety and security experts, in addition to the IAEA and its team. The purpose of the present report is to provide a common basis for discussions amongst stakeholders to collaboratively develop a SBD approach that will be both practically useful and mutually beneficial. The principal conclusions from the present study are: • In the short term, the successful implementation of SBD is principally a project management problem. • Life-cycle cost analysis can be a useful tool in safeguards design. • An important obstacle to straight forward application of life-cycle cost analysis is that there is no single organization responsible for the entire life-cycle cost of the facility. • The Safeguards Effectiveness Report (SGER) is proposed as a focus for the safeguards design activities, and is intended to be a living document that contains increasing safeguards relevant scope and content as the facility design emerges. Further work is required in a number of areas. The authors note that other studies supported by NGSI are addressing the development of requirements and performance criteria, as well as contributing to the design toolkit through the development of technology, methodology, and safeguards guidelines for designers. With respect to further development of the SBD design process, the authors recommend: • In the short term, conduct a workshop with interested industry representatives, to ensure that their perspectives and needs are factored into further development. • In the short term, provide NGSI SBD project documents to IAEA, and support them in the conduct of an ‘SBD Workshop II.” • In the medium term, continue to support the SBD demonstration work started with the Next Generation Nuclear Plant project. • In the longer term, conduct further studies to examine the integration of SBD into projects with concurrent consideration of physical security and safety.

Trond Bjornard; Robert Bean; Phillip Casey Durst; John Hockert; James Morgan

2010-02-01T23:59:59.000Z

417

Manufacturing System Design Framework Manual  

E-Print Network (OSTI)

Previous Lean Aerospace Initiative research in factory operations had indicated that the greatest performance gains are realized when the manufacturing system is designed from the top down and from supplier to the customer. ...

Vaughn, Amanda

2002-01-01T23:59:59.000Z

418

Inherently Reliable Boiler Component Design  

Science Conference Proceedings (OSTI)

This report summarizes the lessons learned during the last decade in efforts to improve the reliability and availability of boilers used in the production of electricity. The information in this report can assist in component modifications and new boiler designs.

2003-03-31T23:59:59.000Z

419

Mechanical considerations and design skills.  

SciTech Connect

The purpose of the report is to provide experienced-based insights into design processes that will benefit designers beginning their employment at Sandia National Laboratories or those assuming new design responsibilities. The main purpose of this document is to provide engineers with the practical aspects of system design. The material discussed here may not be new to some readers, but some of it was to me. Transforming an idea to a design to solve a problem is a skill, and skills are similar to history lessons. We gain these skills from experience, and many of us have not been fortunate enough to grow in an environment that provided the skills that we now need. I was fortunate to grow up on a farm where we had to learn how to maintain and operate several different kinds of engines and machines. If you are like me, my formal experience is partially based upon the two universities from which I graduated, where few practical applications of the technologies were taught. What was taught was mainly theoretical, and few instructors had practical experience to offer the students. I understand this, as students have their hands full just to learn the theoretical. The practical part was mainly left up to 'on the job experience'. However, I believe it is better to learn the practical applications early and apply them quickly 'on the job'. System design engineers need to know several technical things, both in and out of their field of expertise. An engineer is not expected to know everything, but he should know when to ask an expert for assistance. This 'expert' can be in any field, whether it is in analyses, drafting, machining, material properties, testing, etc. The best expert is a person who has practical experience in the area of needed information, and consulting with that individual can be the best and quickest way for one to learn. If the information provided here can improve your design skills and save one design from having a problem, save cost of development, or reduce difficulty in manufacturing, then my writing effort will have been worthwhile. It is also my hope that you will freely provide others with design information that you have found beneficial to the less-experienced engineers. The result will be that as a whole, the designs will improve, and the development time will be shortened from start of the design to full system operation or deployment.

Alvis, Robert L.

2008-03-01T23:59:59.000Z

420

An Oil Pipeline Design Problem  

Science Conference Proceedings (OSTI)

We consider a given set of offshore platforms and onshore wells producing known (or estimated) amounts of oil to be connected to a port. Connections may take place directly between platforms, well sites, and the port, or may go through connection points ... Keywords: Algorithms: interactive branch-and-bound with valid inequalities. industries, Applications: design problem-formulation and analysis. programming, Integer, Networks/graphs, Petroleum/natural gas: oil pipeline network design

Jack Brimberg; Pierre Hansen; Keh-Wei Lin; Nenad Mladenovic; Michèle Breton

2003-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "refereed designation unknown" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Designing Self-Modifying Agents  

E-Print Network (OSTI)

Agents need to be able to adapt to changes in their environment. One way to achieve this, is to provide agents with the ability of self-modification. Self-modification requires reflection and strategies with which new knowledge can be acquired, a necessary condition for creativity. This paper describes a knowledge-level model for the design of self-modifying agents and explores the feasibility of automatically designing self-modifying agents.

Frances M.T. Brazier; Frances M. T; Brazier; Niek J. E. Wijngaards

2001-01-01T23:59:59.000Z

422

K-Basins design guidelines  

Science Conference Proceedings (OSTI)

The purpose of the design guidelines is to enable SNF and K Basin personnel to complete fuel and sludge removal, and basin water mitigation by providing engineering guidance for equipment design for the fuel basin, facility modifications (upgrades), remote tools, and new processes. It is not intended to be a purchase order reference for vendors. The document identifies materials, methods, and components that work at K Basins; it also Provides design input and a technical review process to facilitate project interfaces with operations in K Basins. This document is intended to compliment other engineering documentation used at K Basins and throughout the Spent Nuclear Fuel Project. Significant provisions, which are incorporated, include portions of the following: General Design Criteria (DOE 1989), Standard Engineering Practices (WHC-CM-6-1), Engineering Practices Guidelines (WHC 1994b), Hanford Plant Standards (DOE-RL 1989), Safety Analysis Manual (WHC-CM-4-46), and Radiological Design Guide (WHC 1994f). Documents (requirements) essential to the engineering design projects at K Basins are referenced in the guidelines.

Roe, N.R.; Mills, W.C.

1995-06-01T23:59:59.000Z

423

RNEDE: Resilient Network Design Environment  

SciTech Connect

Modern living is more and more dependent on the intricate web of critical infrastructure systems. The failure or damage of such systems can cause huge disruptions. Traditional design of this web of critical infrastructure systems was based on the principles of functionality and reliability. However, it is increasingly being realized that such design objectives are not sufficient. Threats, disruptions and faults often compromise the network, taking away the benefits of an efficient and reliable design. Thus, traditional network design parameters must be combined with self-healing mechanisms to obtain a resilient design of the network. In this paper, we present RNEDEa resilient network design environment that that not only optimizes the network for performance but tolerates fluctuations in its structure that result from external threats and disruptions. The environment evaluates a set of remedial actions to bring a compromised network to an optimal level of functionality. The environment includes a visualizer that enables the network administrator to be aware of the current state of the network and the suggested remedial actions at all times.

Venkat Venkatasubramanian, Tanu Malik, Arun Giridh; Craig Rieger; Keith Daum; Miles McQueen

2010-08-01T23:59:59.000Z

424

Turbo-Charged Lighting Design  

E-Print Network (OSTI)

The task of the lighting designer has become very complex, involving thousands of choices for fixture types and hundreds of possible lamps. The designer who can consider the most combinations of these items guarantees each client the optimal lighting conditions and the best energy efficiency. This kind of professional service, however, is not available from the software design programs presently on the market. These programs generally let the designer analyze one room at a time, while providing perhaps three possible fixtures to choose from. Additional choices can be accessed from the software’s data base, though at considerable expense in time and patience. This is a real hindrance when designing for a complex structure such as a hospital, which has many spaces with different task-specific lighting standards. The author was challenged by lighting-level requirements that spanned the range of possibilities, and was able to devise an accurate, expedient solution using a dBase language program. The result was a powerful tool integrating the entire gamut of design possibilities provided by the luminaire industry.

Clark, W. H. II

1992-05-01T23:59:59.000Z

425

Y-12 Sustainable Design Principles for Building Design and Construction  

Science Conference Proceedings (OSTI)

B&W Y-12 is committed to modernizing the Y-12 complex to meet future needs with a sustainable and responsive infrastructure and to integrating sustainability principles and practices into Y-12 work (Y72-001, B&W Y-12 Environmental, Safety and Health Policy). This commitment to sustainability and specifically sustainable design of buildings is also incorporated into Presidential Executive Orders (EO), DOE Orders (DOE O), and goals. Sustainable building design is an approach to design, construct, and operate facilities in an efficient and environmentally sound manner that will produce a healthful, resource-efficient and productive working environment that is inherently protective of the environment. The DOE has established the following 5 Guiding Principles for High Performance Sustainable Building (HPSB), and has issued directives that require Y-12 to incorporate the principles and a number of supporting specific practices and techniques into building design, construction and renovation projects: (1) Employ Integrated Design Principles; (2) Optimize Energy Performance; (3) Protect and Conserve Water; (4) Enhance Indoor Environmental Quality; and (5) Reduce Environmental Impact of Materials. The purpose of this document is to present the required sustainable building principles, practices and techniques, summarize the key drivers for incorporating them into Y-12 projects, and present additional recommendations and resources that can be used to support sustainable buildings to enhance the environmental and economic performance of the Y-12 Complex.

Jackson, J. G.

2008-11-01T23:59:59.000Z

426

Design  

Science Conference Proceedings (OSTI)

... 4.19: Debbie Brown / Independent; Candidate #4.20: Joseph Teller / Independent; ... Candidate #7.1: Edward Shiplett / Blue; Candidate #7.2: Marty ...

2010-09-28T23:59:59.000Z

427

Design-for-empowerment-for-design : computational structures for design democratization  

E-Print Network (OSTI)

The vision to engage non-architects in the design of their habitat through the mediation of computer aids, dates back to the early computational era (1960s-1970s) and is currently being recast under cyber-cultural and ...

Vardouli, Theodora

2012-01-01T23:59:59.000Z

428

Journal Article Reviews The purpose of these assignments is to familiarize you with refereed journals devoted to  

E-Print Network (OSTI)

think? Don't just say you whether you liked it or not ­ tell me why, in your informed opinion, you think. 3rd Journal article review ­ Wilderness Recreation Use; Choose ONE: Farrell, T., Hall, T. E. & White are important. Avoid sentence fragments by writing in complete sentences. Edit your paper for readability

Brown, Gregory G.

429

DARHT : integration of shielding design and analysis with facility design /  

SciTech Connect

The design of the interior portions of the Dual Axis Radiographic Hydrodynamic Test (DARHT) Facility incorporated shielding and controls from the beginning of the installation of the Accelerators. The purpose of the design and analysis was to demonstrate the adequacy of shielding or to determine the need for additional shielding or controls. Two classes of events were considered: (1) routine operation defined as the annual production of 10,000 2000-ns pulses of electrons at a nominal energy of 20 MeV, some of which are converted to the x-ray imaging beam consisting of four nominal 60-ns pulses over the 2000-ns time frame, and (2) accident case defined as up to 100 2000-ns pulses of electrons accidentally impinging on some metallic surface, thereby producing x rays. Several locations for both classes of events were considered inside and outside of the accelerator hall buildings. The analysis method consisted of the definition of a source term for each case studied and the definition of a model of the shielding and equipment present between the source and the dose areas. A minimal model of the fixed existing or proposed shielding and equipment structures was used for a first approximation. If the resulting dose from the first approximation was below the design goal (1 rem/yr for routine operations, 5 rem for accident cases), then no further investigations were performed. If the result of the first approximation was above our design goals, the model was refined to include existing or proposed shielding and equipment. In some cases existing shielding and equipment were adequate to meet our goals and in some cases additional shielding was added or administrative controls were imposed to protect the workers. It is expected that the radiation shielding design, exclusion area designations, and access control features, will result in low doses to personnel at the DARHT Facility.

Boudrie, R. L. (Richard L.); Brown, T. H. (Thomas H.); Gilmore, W. E. (Walter E.); Downing, J. N. (James N.), Jr.; Hack, Alan; McClure, D. A. (Donald A.); Nelson, C. A. (Christine A.); Wadlinger, E. Alan; Zumbro, M. V. (Martha V.)

2002-01-01T23:59:59.000Z

430

ESBWR... An Evolutionary Reactor Design  

Science Conference Proceedings (OSTI)

GE's latest evolution of the Boiling Water Reactor, the ESBWR, combines improvements in safety with design simplification and component standardization to produce a safer, more reliable nuclear power plant, with lower projected construction costs than plants in operation today. The ESBWR program started in the early 1990's when GE was developing the Simplified Boiling Water Reactor (SBWR). GE stopped this program because the power output of the SBWR was too small to generate the right economics for a new build project. The program was a success however, because the design proved many of the passive safety technology developments that are being utilized in the ESBWR. By harnessing these design concepts and testing results from the original SBWR and construction and operating experience from the Advanced Boiling Water Reactor (ABWR), the ESBWR design team has produced a simplified reactor with a standardized design and first-rate economics. Significant simplification of plant systems is achieved in the ESBWR. As a result, operating and maintenance staff requirements are reduced; low-level waste generation is reduced; dose rates are reduced; operational reliability is improved; and plant safety and security are improved. Each of these improvements provide distinct and unique advantages to the ESBWR design. First, fewer active components (in particular, active safety systems) reduce the maintenance and online surveillance requirements, thereby reducing operational exposure and dose rates. Second, fewer demands on plant operators and safety systems reduce plant operating staff while still providing direct improvements in accident and transient response. Finally, reductions in building volumes and required manufactured components shorten the length of time needed for ESBWR construction, resulting in improved financial returns for plant owners. The ESBWR is designed to meet the needs of nuclear power plant owners today and into the future, with a 60-year design life. Through design simplification and standardization, ESBWR offers improved safety, increased reliability, and ease of operation. Yet compared to current nuclear power plants, the ESBWR requires only a fraction of traditional plant operating and maintenance staff, offers faster construction and lower costs of construction, while also reducing operational costs. (authors)

Gamble, Robert E. [GE Energy - Nuclear, 1989 Little Orchard St., San Jose, CA 95125 (United States); Hinds, David H.; Hucik, Steven A.; Maslak, Chris E. [GE Energy - Nuclear, 3901 Castle Hayne Road A-30, Wilmington, NC 28402 (United States)

2006-07-01T23:59:59.000Z

431

Multidisciplinary design optimization of an automotive magnetorheological brake design  

Science Conference Proceedings (OSTI)

This paper presents the development of a new electromechanical brake system using magnetorheological (MR) fluid. The proposed brake system consists of rotating disks immersed in a MR fluid and enclosed in an electromagnet, where the yield stress of the ... Keywords: Automotive brake, Computational fluid dynamics, Electric brake actuator, Finite element analysis, Magnetorheological fluid, Multidisciplinary design optimization

Edward J. Park; Luis Falcão da Luz; Afzal Suleman

2008-02-01T23:59:59.000Z

432

Designing an electronic medical records system using design patterns  

Science Conference Proceedings (OSTI)

In the recent decades the importance of the information systems (IS) has been steadily growing. Nowadays most of the operations that imply complex manipulations with data and storage of large volumes of data are being automated through the use of various ... Keywords: EMR (Electronic Medical Records), HIS (Healthcare Information System), UML, design patterns

Yerbol Nisanbayev; Huiseong Na; Dongwook Lim; Franz Ko

2009-11-01T23:59:59.000Z

433

Precision Designs | Open Energy Information  

Open Energy Info (EERE)

Designs Designs Jump to: navigation, search Name Precision Designs Place Rochester, New York Zip 14624 Product Manufacturer of test equipment for fuel cells. Coordinates 43.1555°, -77.616033° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":43.1555,"lon":-77.616033,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

434

Building Design | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Design Design Building Design As a researcher at the Pacific Northwest National Laboratory, Dr. Michael Brambley is working to improve the energy efficiency of our nation’s buildings. In this "10 Questions," learn how he is marrying engineering and computer technology to cut energy waste in commercial buildings. As a researcher at the Pacific Northwest National Laboratory, Dr. Michael Brambley is working to improve the energy efficiency of our nation's buildings. In this "10 Questions," learn how he is marrying engineering and computer technology to cut energy waste in commercial buildings. Commercial buildings have high energy needs and can put great strain on the nation's power grids during peak periods. Developing more efficient

435

Design Development (65%) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Design Development (65%) Design Development (65%) Design Development (65%) October 16, 2013 - 4:38pm Addthis The design development (65%) phase is a progression where changes from the schematic design phase are incorporated and further details are developed on building systems. In this phase, the architectural and engineering (A&E) firm typically starts to present overall costs associated with the design. As with the each design phase, the current design will be reviewed by the design team, and the agency should ask the A&E firm to substantiate how the included measures meet design requirements for energy. Design development is when the size and design of the specific renewable energy technologies is accomplished. It is important to evaluate the design to ensure that the particular technology can be incorporated into the

436

Design Team Charrette | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Design Team Charrette Design Team Charrette Design Team Charrette October 16, 2013 - 4:37pm Addthis Holding a design team charrette is a key first step in bringing together the entire design team, including the agency, the winning architectural and engineering (A&E) firm, other design team members, and key experts that can inform the early design process. For renewable energy integration, the agency's project energy lead must be involved at this stage. Bringing the design team members together early is essential in ensuring that design requirements for energy are incorporated into the design efforts moving forward. A design charrette provides an opportunity for designers, users, and other decision makers to give input on how to best integrate their respective efforts into the project. The design charrette is a process that allows

437

Image-Based Lighting Design  

E-Print Network (OSTI)

In this paper, we present a lighting design framework for neardiffuse real objects, starting from a set of prerecorded photographs of an object under various lighting conditions. Light sources are placed at fixed positions around an object, for which the intensities are to be determined. Using existing digital imaging software, the lighting designer paints the desired illumination distribution on a photograph of an object. This painted-on illumination is used to determine the light intensities which produce a shading of the real object matching the desired illumination distribution. Certain areas in the painted image can be favored among others by weighting their importance in the optimization algorithm.

F. Anrys; P. Dutré

2004-01-01T23:59:59.000Z

438

Lighting Design By Simulated Annealing  

E-Print Network (OSTI)

In this paper, we present a lighting design framework for glossy real objects, starting from the reflectance field of an object. Using existing digital imaging software, the lighting designer paints the desired illumination distribution on a photograph of an object. This painted-on illumination is used to determine the light intensities which produce a shading of the real object matching the desired illumination distribution. Certain areas in the painted image can be favored among others by weighting their importance in the optimization algorithm. Our optimization algorithm is driven by a simulated annealing approach to find fixed-sized lighting combinations and accompagnying intensities.

F. Anrys; P. Dutré

2004-01-01T23:59:59.000Z

439

Revised Wet Stack Design Guide  

Science Conference Proceedings (OSTI)

For the past 14 years, the design of wet stacks around the world has been guided by the original EPRI Wet Stacks Design Guide (1996). Since that time, the number of wet stack installations has grown considerably, and a wealth of practical real-world operating and maintenance experience has been obtained. The laws of physics have not changed, and most of the information presented in 1996 is just as valid today as it was when originally published. What has changed is the power-generation ...

2012-12-12T23:59:59.000Z

440

Fictional characters in participatory design sessions: Introducing the "design alter egos" technique  

Science Conference Proceedings (OSTI)

In recent years, the discourse concerning the relationship between narrative theory - storytelling in general - interactivity, and design is undeniably noteworthy. A significant part of this discourse concerns the use of fictional characters in design. ... Keywords: Collaborative software design, Design alter egos, Design in imaginary landscapes, Fictional characters, Participatory design, Student-centered design

George Triantafyllakos; George Palaigeorgiou; Ioannis A. Tsoukalas

2010-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "refereed designation unknown" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Participatory design for exertion interfaces for children  

Science Conference Proceedings (OSTI)

We propose an adaptation of Participatory Design (PD) specifically conceived for full-body interaction design addressing the specificities that this entails. The idea is to include the preferences and points of view of children in the process of designing ... Keywords: Wizard of Oz, children, exertion interfaces, full-body interaction, interaction design, participatory design, physical activity

Pascal Landry; Narcís Parés; Joseph Minsky; Roc Parés

2012-06-01T23:59:59.000Z

442

Constraint capture and maintenance in engineering design  

Science Conference Proceedings (OSTI)

The Designers' Workbench is a system developed by the Advanced Knowledge Technologies Consortium to support designers in large organizations, such as Rolls-Royce, to ensure that the design is consistent with the specification for the particular design ... Keywords: Application Conditions, Capture, Constraints, Design, Maintenance, Rationales

Suraj Ajit; Derek Sleeman; David w. Fowler; David Knott

2008-11-01T23:59:59.000Z

443

Traceability and Modularity in Software Design  

Science Conference Proceedings (OSTI)

A software design specification consists of a number of documents that describe various aspect of the design at different levels of detail, that are linked in many ways. This paper shows how different designs may use different modularization criteria, ... Keywords: traceability, modularity, structured design, object-oriented design

R. J. Wieringa

1998-04-01T23:59:59.000Z

444

The Programmer's Apprentice: A Program Design Scenario  

E-Print Network (OSTI)

A scenario is used to illustrate the capabilities of a proposed Design Apprentice, focussing on the area of detailed, low-level design. Given a specification, the Design Apprentice will be able to make many of the design decisions needed to synthesize the required program. The Design Apprentice will also be able to detect various kinds of contradictions and omissions in a specifica- tion.

Charles Rich; Richard C. Waters

1987-01-01T23:59:59.000Z

445

Refining interaction designs through simplicity  

Science Conference Proceedings (OSTI)

With more and more devices in our surroundings, users increasingly-consume applications and digital services which compete for their attention. Therefore, users appreciate simplicity when they interact with them because a less intrusive interaction allows ... Keywords: interaction, mobile devices, simplicity, user-centered design

Pablo Muñoz; Pau Giner; Vicente Pelechano

2010-11-01T23:59:59.000Z

446

ILC cryogenic systems reference design  

SciTech Connect

A Global Design Effort (GDE) began in 2005 to study a TeV scale electron-positron linear accelerator based on superconducting radio-frequency (RF) technology, called the International Linear Collider (ILC). In early 2007, the design effort culminated in a reference design for the ILC, closely based on the earlier TESLA design. The ILC will consist of two 250 GeV linacs, which provide positron-electron collisions for high energy physics research. The particle beams will be accelerated to their final energy in superconducting niobium RF cavities operating at 2 kelvin. At a length of about 12 km each, the main linacs will be the largest cryogenic systems in the ILC. Positron and electron sources, damping rings, and beam delivery systems will also have a large number and variety of other superconducting RF cavities and magnets, which require cooling at liquid helium temperatures. Ten large cryogenic plants with 2 kelvin refrigeration are envisioned to cool the main linacs and the electron and positron sources. Three smaller cryogenic plants will cool the damping rings and beam delivery system components predominately at 4.5 K. This paper describes the cryogenic systems concepts for the ILC.

Peterson, T.J.; Geynisman, M.; Klebaner, A.; Theilacker, J.; /Fermilab; Parma, V.; Tavian, L.; /CERN

2008-01-01T23:59:59.000Z

447

Dynamic Vnodes - design and implementation  

Science Conference Proceedings (OSTI)

Dynamic vnodes make the UNIX kernel responsive to a varying demand for vnodes, without a need to rebuild the kernel. It also optimizes the usage of memory by deallocating excess vnodes. This paper describes the design and implementation of dynamic vnodes ...

Aju John

1995-01-01T23:59:59.000Z

448

WEAPONS EFFECTS FOR PROTECTIVE DESIGN  

SciTech Connect

A lecture intended to provide a general background in weapons effects is presented. Specific areas of nuclear explosion phenomena pertinent to the design of hardened systems discussed include nuclear radiation and shielding, fireball growth and effects, thermal radiation, air blast, cratering and throwout, ground shock effects, fallout, and afterwinds. (J.R.D.)

Brode, H.L.

1960-03-31T23:59:59.000Z

449

Design and analysis tool validation  

DOE Green Energy (OSTI)

The Solar Energy Research Institute (SERI) is developing a procedure for the validation of Building Energy Analysis Simulation Codes (BEAS). These codes are being used increasingly in the building design process, both directly and as the basis for simplified design tools and guidelines. The importance of the validity of the BEAS in predicting building energy performance is obvious when one considers the money and energy that could be wasted by energy-inefficient designs. However, to date, little or no systematic effort has been made to ensure the validity of the various BEAS. The validation work at SERI consists of three distinct parts: Comparative Study, Analytical Verification, and Empirical Validation. The procedures have been developed for the first two parts and have been implemented on a sampling of the major BEAS; results have shown major problems in one of the BEAS tested. Furthermore, when one building design was run using several of the BEAS, large differences were found in the predicted annual cooling and heating loads. The empirical validation procedure has been developed, and five two-zone test cells have been constructed for validation; a summer validation run will take place as soon as the data acquisition system is completed. Additionally, a test validation exercise is now in progress using the low-cal house to fine-tune the empirical validation procedure and better define monitoring data requirements.

Judkoff, R.

1981-07-01T23:59:59.000Z

450

MHD-ETF design criteria  

DOE Green Energy (OSTI)

This document establishes criteria to be utilized for the design of a pilot-scale (150 to 300 MW thermal) open cycle, coal-fired MHD/steam plant. Criteria for this Engineering Test Facility (ETF) are presented relative to plant siting, plant engineering and operations, MHD-ETF testing, costing and scheduling.

Retallick, F.D.

1978-04-01T23:59:59.000Z

451

Commercial Cool Storage Design Guide  

Science Conference Proceedings (OSTI)

This state-of-the-art handbook provides comprehensive guidance for designing ice and chilled-water storage systems for commercial buildings. HVAC engineers can take advantage of attractive rates and incentives offered by utilities to increase the market for cool storage systems.

1985-05-01T23:59:59.000Z

452

Waste Package Design Methodology Report  

Science Conference Proceedings (OSTI)

The objective of this report is to describe the analytical methods and processes used by the Waste Package Design Section to establish the integrity of the various waste package designs, the emplacement pallet, and the drip shield. The scope of this report shall be the methodology used in criticality, risk-informed, shielding, source term, structural, and thermal analyses. The basic features and appropriateness of the methods are illustrated, and the processes are defined whereby input values and assumptions flow through the application of those methods to obtain designs that ensure defense-in-depth as well as satisfy requirements on system performance. Such requirements include those imposed by federal regulation, from both the U.S. Department of Energy (DOE) and U.S. Nuclear Regulatory Commission (NRC), and those imposed by the Yucca Mountain Project to meet repository performance goals. The report is to be used, in part, to describe the waste package design methods and techniques to be used for producing input to the License Application Report.

D.A. Brownson

2001-09-28T23:59:59.000Z

453

Passive Solar Home Design | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Passive Solar Home Design Passive Solar Home Design June 24, 2013 - 7:18pm Addthis This North Carolina home gets most of its space heating from the passive solar design, but the...

454

Establishing relationships for designing rural information systems  

Science Conference Proceedings (OSTI)

Designing for the developing world presents unique challenges. Establishing rapport with local partners is important to overcome contextual unfamiliarity and ensure the relevance of proposed solutions. In this paper, we discuss our experiences designing ... Keywords: ICT, design practices, rural development

Yael Schwartzman; Tapan S. Parikh

2007-04-01T23:59:59.000Z

455

The Programmer's Apprentice: A Program Design Scenario  

E-Print Network (OSTI)

A scenario is used to illustrate the capabilities of a proposed Design Apprentice, focussing on the area of detailed, low-level design. Given a specification, the Design Apprentice will be able to make many of the ...

Rich, Charles

1987-11-01T23:59:59.000Z

456

Contestational design : innovation for political activism  

E-Print Network (OSTI)

This thesis presents contestational design, a unique form of design activity whose aim is promote particular agendas in contested political arenas. I propose a framework for analyzing contestational design processes, which ...

Hirsch, Edward A., 1970-

2008-01-01T23:59:59.000Z

457

Model Reuse through Hardware Design Patterns  

Science Conference Proceedings (OSTI)

Increasing reuse opportunities is a well-known problem for software designers as well as for hardware designers. Nonetheless, current software and hardware engineering practices have embraced different approaches to this problem. Software designs are ...

Fernando Rincon; Francisco Moya; Jesus Barba; Juan Carlos Lopez

2005-03-01T23:59:59.000Z

458

Cold vacuum drying facility design requirements  

SciTech Connect

This release of the Design Requirements Document is a complete restructuring and rewrite to the document previously prepared and released for project W-441 to record the design basis for the design of the Cold Vacuum Drying Facility.

Irwin, J.J.

1997-09-24T23:59:59.000Z

459

Structural Design Challenges in Design Certification Applications for New Reactors  

SciTech Connect

The licensing framework established by the U.S. Nuclear Regulatory Commission under Title 10 of the Code of Federal Regulations (10 CFR) Part 52, “Licenses, Certifications, and Approvals for Nuclear Power Plants,” provides requirements for standard design certifications (DCs) and combined license (COL) applications. The intent of this process is the early reso- lution of safety issues at the DC application stage. Subsequent COL applications may incorporate a DC by reference. Thus, the COL review will not reconsider safety issues resolved during the DC process. However, a COL application that incorporates a DC by reference must demonstrate that relevant site-specific de- sign parameters are confined within the bounds postulated by the DC, and any departures from the DC need to be justified. This paper provides an overview of structural design chal- lenges encountered in recent DC applications under the 10 CFR Part 52 process, in which the authors have participated as part of the safety review effort.

Miranda, M.; Braverman, J.; Wei, X.; Hofmayer, C.; Xu, J.

2011-07-17T23:59:59.000Z

460

TPX: Contractor preliminary design review. Volume 3, Design and analysis  

Science Conference Proceedings (OSTI)

Several models have been formed for investigating the maximum electromagnetic loading and magnetic field levels associated with the Tokamak Physics eXperiment (TPX) superconducting Poloidal Field (PF) coils. The analyses have been performed to support the design of the individual fourteen hoop coils forming the PF system. The coils have been sub-divided into three coil systems consisting of the central solenoid (CS), PF5 coils, and the larger radius PF6 and PF7 coils. Various electromagnetic analyses have been performed to determine the electromagnetic loadings that the coils will experience during normal operating conditions, plasma disruptions, and fault conditions. The loadings are presented as net body forces acting individual coils, spatial variations throughout the coil cross section, and force variations along the path of the conductor due to interactions with the TF coils. Three refined electromagnetic models of the PF coil system that include a turn-by-turn description of the fields and forces during a worst case event are presented in this report. A global model including both the TF and PF system was formed to obtain the force variations along the path of the PF conductors resulting from interactions with the TF currents. In addition to spatial variations, the loadings are further subdivided into time-varying and steady components so that structural fatigue issues can be addressed by designers and analysts. Other electromagnetic design issues such as the impact of the detailed coil designs on field errors are addressed in this report. Coil features that are analyzed include radial transitions via short jogs vs. spiral type windings and the effects of layer-to-layer rotations (i.e clocking) on the field errors.

NONE

1995-06-30T23:59:59.000Z

Note: This page contains sample records for the topic "refereed designation unknown" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Federal Energy Management Program: Product Designation Process  

NLE Websites -- All DOE Office Websites (Extended Search)

Product Product Designation Process to someone by E-mail Share Federal Energy Management Program: Product Designation Process on Facebook Tweet about Federal Energy Management Program: Product Designation Process on Twitter Bookmark Federal Energy Management Program: Product Designation Process on Google Bookmark Federal Energy Management Program: Product Designation Process on Delicious Rank Federal Energy Management Program: Product Designation Process on Digg Find More places to share Federal Energy Management Program: Product Designation Process on AddThis.com... Energy-Efficient Products Federal Requirements Covered Product Categories Product Designation Process Low Standby Power Energy & Cost Savings Calculators Model Acquisitions Language Working Group Resources

462

Chapter 4: The Building Architectural Design  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

: The Building : The Building Architectural Design Schematic Design Designing Using Computer Simulations Design of High Performance Features and Systems Designing for Daylighting Passive and Active Solar Systems Accommodating Recycling Activities LANL | Chapter 4 The Building Architectural Design Schematic Design Achieving a sustainable building requires a commitment from developing the initial F&OR documents through construction detailing and commissioning. Initial deci- sions, such as the building's location, general massing, and configuration profoundly affect the building's envi- ronmental impact and energy performance. Well- defined sustainable goals will guide the entire spectrum of decision-making throughout the design and con- struction process (see Chapter 2).

463

AEDG Implementation Recommendations: Interior Lighting Good Design...  

NLE Websites -- All DOE Office Websites (Extended Search)

Compliance Regulations Resource Center AEDG Implementation Recommendations: Interior Lighting Good Design Practice The Advanced Energy Design Guide (AEDG) for Small Office...

464

Credible Research Designs for Minimum Wage Studies  

E-Print Network (OSTI)

Credible Research Designs for Minimum Wage Studies SylviaWe assess alternative research designs for minimum wageAllegretto: Institute for Research on Labor and Employment,

Allegretto, Sylvia; Dube, Arindrajit; Reich, Michael; Zipperer, Ben

2013-01-01T23:59:59.000Z

465

Database Design Using Entity-Relationship Diagrams  

Science Conference Proceedings (OSTI)

With this comprehensive guide, database designers and developers can quickly learn all the ins and outs of E-R diagramming to become expert database designers.

Sikha Bagui; Richard Earp

2003-06-01T23:59:59.000Z

466

GLOBAL OPTIMIZATION OF NONLINEAR NETWORK DESIGN 1 ...  

E-Print Network (OSTI)

of nonlinear network design refers to the minimum cost design of resistances on a .... common fluid networks of water, crude oil, natural gas satisfy the above ...

467

International linear collider reference design report  

E-Print Network (OSTI)

for the Baseline cost estimate, may eventually prove bene?Reference Design and associated cost estimate began. The GDEand reviewing the cost estimate. • A Design and Cost Board (

Aarons, G.

2008-01-01T23:59:59.000Z

468

QA in Design Guidance | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

in Design Guidance QA in Design Guidance This Department of Energy (DOE) Environmental Management (EM) guidance document is approved for use by all DOE EM organizational units and...

469

Optimal Design of Electrical Machines: Mathematical Programming ...  

E-Print Network (OSTI)

for the same problem of the design of an electrical machine without slot. ... tion, inverse problem, design, electrical machine ..... trade-off situation arises.

470

California Green Designs | Open Energy Information  

Open Energy Info (EERE)

| Sign Up Search Page Edit with form History Facebook icon Twitter icon California Green Designs Jump to: navigation, search Name California Green Designs Place Encino,...

471

NSLS-II Conceptual Design Report (CDR)  

NLE Websites -- All DOE Office Websites (Extended Search)

Conceptual Design Report NSLS-II CDR cover Brookhaven National Laboratory has prepared a conceptual design for a world class user facility for scientific research using synchrotron...

472

NREL: Transmission Grid Integration - Electricity Market Design  

NLE Websites -- All DOE Office Websites (Extended Search)

Electricity Market Design Researchers at NREL are studying electricity market designs to find ways to better accommodate variable renewable energy resources and maximize...

473

China Building Design Consultants | Open Energy Information  

Open Energy Info (EERE)

Building Design Consultants Jump to: navigation, search Name China Building Design Consultants Place Beijing Municipality, China Sector Solar Product Beijing-based architecture...

474

Responsive design in Windows 8 applications.  

E-Print Network (OSTI)

?? Responsive design is a common expression at the web today. This thesis was about learning about responsive web design in order to apply it… (more)

Klockare, Sofi

2013-01-01T23:59:59.000Z

475

Low-Energy Parking Structure Design (Brochure)  

Science Conference Proceedings (OSTI)

This guide provides design teams with best practices for parking structure energy efficiency in the form of goals for each design aspect that affects energy use.

Not Available

2013-01-01T23:59:59.000Z

476

A study of the role of user-centered design methods in design team projects  

E-Print Network (OSTI)

User-centered approaches to design can guide teams toward an understanding of users and aid teams in better posing design problems. This paper investigates the role of user-centered design approaches in design process and ...

Lai, Justin Y.

477

Can Fish Morphological Characteristics be Used to Re-design Hydroelectric Turbines?  

Science Conference Proceedings (OSTI)

Safe fish passage affects not only migratory species, but also populations of resident fish by altering biomass, biodiversity, and gene flow. Consequently, it is important to estimate turbine passage survival of a wide range of susceptible fish. Although fish-friendly turbines show promise for reducing turbine passage mortality, experimental data on their beneficial effects are limited to only a few species, mainly salmon and trout. For thousands of untested species and sizes of fish, the particular causes of turbine passage mortality and the benefits of fish-friendly turbine designs remain unknown. It is not feasible to measure the turbine-passage survival of every species of fish in every hydroelectric turbine design. We are attempting to predict fish mortality based on an improved understanding of turbine-passage stresses (pressure, shear stress, turbulence, strike) and information about the morphological, behavioral, and physiological characteristics of different fish taxa that make them susceptible to the stresses. Computational fluid dynamics and blade strike models of the turbine environment are re-examined in light of laboratory and field studies of fish passage effects. Comparisons of model-predicted stresses to measured injuries and mortalities will help identify fish survival thresholds and the aspects of turbines that are most in need of re-design. The coupled model and fish morphology evaluations will enable us to make predictions of turbine-passage survival among untested fish species, for both conventional and advanced turbines, and to guide the design of hydroelectric turbines to improve fish passage survival.

Cada, G. F.; Richmond, Marshall C.

2011-07-19T23:59:59.000Z

478

Design of the VLPC Cryostats  

SciTech Connect

A short profile (40 cm), long length (2.50 m) rectangular helium cryostat has been designed, built and tested for maintaining electronic chips at a stable 9.0 Kelvin temperature. Heat load, and thermal stresses were major design considerations. The distance from room temperature to liquid nitrogen intercept temperature is only 8 centimeters. Liquid nitrogen temperature to liquid helium temperature occurs in 13 centimeters. An alloy known as Invar, 36% Nickel, balance Iron, was used to fabricate the vessel walls and liquid nitrogen heat intercept tubing because of it's low coefficient of thermal expansion. The cryostat accepts fifty-one, 3.5 cm x 42.5 cm devices that extend 26.7 cm into the cryostat. Tight clearance fits to the liquid nitrogen and liquid helium intercepts are maintained. Gaseous helium is used within the cryostat for heat transfer.

Rucinski, Russell A.

2001-07-19T23:59:59.000Z

479

Designing for Absolute Moisture Control  

E-Print Network (OSTI)

Rarely is an industry trade journal published without at least one article included concerning the topic of Indoor Air Quality (IAQ) or the related Sick Building Syndrome (SBI). Whether the subject of the article is a school, an office building or a public assembly building, chances are the origin of the IAQ problems stem from excessive moisture in the space. Excessive moisture in the space can either come from water damage (leaking pipes or poor integrity of the building envelope), or it comes from uncontrolled, excessive humidity in the space. This paper pertains to the latter of these two sources. With the air conditioning technologies available, and the published design data available through ASHRAE today, appropriate HVAC systems can be designed to adequately control not just the temperature in the spaces, but also the humidity.

Nunnelly, R. M.; Fex, J. P.

2002-01-01T23:59:59.000Z

480

Designing Reactors to Facilitate Decommissioning  

SciTech Connect

Critics of nuclear power often cite issues with tail-end-of-the-fuel-cycle activities as reasons to oppose the building of new reactors. In fact, waste disposal and the decommissioning of large nuclear reactors have proven more challenging than anticipated. In the early days of the nuclear power industry the design and operation of various reactor systems was given a great deal of attention. Little effort, however, was expended on end-of-the-cycle activities, such as decommissioning and disposal of wastes. As early power and test reactors have been decommissioned difficulties with end-of-the-fuel-cycle activities have become evident. Even the small test reactors common at the INEEL were not designed to facilitate their eventual decontamination, decommissioning, and dismantlement. The results are that decommissioning of these facilities is expensive, time consuming, relatively hazardous, and generates large volumes of waste. This situation clearly supports critics concerns about building a new generation of power reactors.

Richard H. Meservey

2006-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "refereed designation unknown" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Mission design for LISA Pathfinder  

E-Print Network (OSTI)

Here we describe the mission design for SMART-2/LISA Pathfinder. The best trade-off between the requirements of a low-disturbance environment and communications distance is found to be a free-insertion Lissajous orbit around the first co-linear Lagrange point of the Sun-Earth system L1, 1.5x 10^6 km from Earth. In order to transfer SMART-2/LISA Pathfinder from a low Earth orbit, where it will be placed by a small launcher, the spacecraft carries out a number of apogee-raise manoeuvres, which ultimatively place it to a parabolic escape trajectory towards L1. The challenges of the design of a small mission are met, fulfilling the very demanding technology demonstration requirements without creating excessive requirements on the launch system or the ground segment.

M. Landgraf; M. Hechler; S. Kemble

2004-11-15T23:59:59.000Z

482

1. First Time Designer's Guide  

E-Print Network (OSTI)

Altera provides various tools for development of hardware and software for embedded systems. This handbook complements the primary documentation for these tools by describing how to most effectively use some of these tools. It recommends design styles and practices for developing, debugging, and optimizing embedded systems using Altera-provided tools such as the Software Build Tools for Eclipse and SOPC Builder. The handbook introduces concepts to new users of Altera’s embedded solutions, and helps to increase the design efficiency of the experienced user. This handbook is not a comprehensive reference guide. For general reference and detailed information, refer to the primary documentation cited in this handbook. This first chapter of the handbook contains information about the Altera ® embedded development process and procedures for the first time user. The remaining chapters focus on specific aspects of embedded development for Altera FPGAs. This handbook does not provide information about the Qsys system integration tool.

unknown authors

2011-01-01T23:59:59.000Z

483

Security-by-design handbook.  

SciTech Connect

This document is a draft SecuritybyDesign (SeBD) handbook produced to support the Work Plan of the Nuclear Security Summit to share best practices for nuclear security in new facility design. The Work Plan calls on States to %E2%80%9Cencourage nuclear operators and architect/engineering firms to take into account and incorporate, where appropriate, effective measures of physical protection and security culture into the planning, construction, and operation of civilian nuclear facilities and provide technical assistance, upon request, to other States in doing so.%E2%80%9D The materials for this document were generated primarily as part of a bilateral project to produce a SeBD handbook as a collaboration between the Japan Atomic Energy Agency (JAEA) Nuclear Nonproliferation Science and Technology Center and Sandia National Laboratories (SNL), which represented the US Department Energy (DOE) National Nuclear Security Administration (NNSA) under a Project Action Sheet PASPP04. Input was also derived based on tours of the Savannah River Site (SRS) and Japan Nuclear Fuel Limited (JNFL) Rokkasho Mixed Oxide Fuel fabrication facilities and associated project lessonslearned. For the purposes of the handbook, SeBD will be described as the systemlevel incorporation of the physical protection system (PPS) into a new nuclear power plant or nuclear facility resulting in a PPS design that minimizes the risk of malicious acts leading to nuclear material theft; nuclear material sabotage; and facility sabotage as much as possible through features inherent in (or intrinsic to) the design of the facility. A fourelement strategy is presented to achieve a robust, durable, and responsive security system.

Snell, Mark Kamerer; Jaeger, Calvin Dell; Scharmer, Carol; Jordan, Sabina Erteza; Tanuma, Koji [Japan Atomic Energy Agency, Tokai-mura, Ibaraki, Japan; Ochiai, Kazuya [Japan Atomic Energy Agency, Tokai-mura, Ibaraki, Japan; Iida, Toru [Japan Atomic Energy Agency, Tokai-mura, Ibaraki, Japan

2013-01-01T23:59:59.000Z

484

Security-by-design handbook.  

Science Conference Proceedings (OSTI)

This document is a draft SecuritybyDesign (SeBD) handbook produced to support the Work Plan of the Nuclear Security Summit to share best practices for nuclear security in new facility design. The Work Plan calls on States to %E2%80%9Cencourage nuclear operators and architect/engineering firms to take into account and incorporate, where appropriate, effective measures of physical protection and security culture into the planning, construction, and operation of civilian nuclear facilities and provide technical assistance, upon request, to other States in doing so.%E2%80%9D The materials for this document were generated primarily as part of a bilateral project to produce a SeBD handbook as a collaboration between the Japan Atomic Energy Agency (JAEA) Nuclear Nonproliferation Science and Technology Center and Sandia National Laboratories (SNL), which represented the US Department Energy (DOE) National Nuclear Security Administration (NNSA) under a Project Action Sheet PASPP04. Input was also derived based on tours of the Savannah River Site (SRS) and Japan Nuclear Fuel Limited (JNFL) Rokkasho Mixed Oxide Fuel fabrication facilities and associated project lessonslearned. For the purposes of the handbook, SeBD will be described as the systemlevel incorporation of the physical protection system (PPS) into a new nuclear power plant or nuclear facility resulting in a PPS design that minimizes the risk of malicious acts leading to nuclear material theft; nuclear material sabotage; and facility sabotage as much as possible through features inherent in (or intrinsic to) the design of the facility. A fourelement strategy is presented to achieve a robust, durable, and responsive security system.

Snell, Mark Kamerer; Jaeger, Calvin Dell; Scharmer, Carol; Jordan, Sabina Erteza; Tanuma, Koji [Japan Atomic Energy Agency, Tokai-mura, Ibaraki, Japan; Ochiai, Kazuya [Japan Atomic Energy Agency, Tokai-mura, Ibaraki, Japan; Iida, Toru [Japan Atomic Energy Agency, Tokai-mura, Ibaraki, Japan

2013-01-01T23:59:59.000Z

485

Scoping study: Substation design workstation  

SciTech Connect

This project conducted a survey, consisting of a written questionaire, a workshop, and site visits to determine what facets of substation engineering would benefit from incorporation into a workstation environment. Based on the needs expressed by the respondents, a program for the staged development of a Substation Workstation is recommended. Six analytical function modules for assisting in substation engineering were identified for potential inclusion in the workstation: Initial Planning Activities; Physical Plant Design; Analytical Functions; Civil/Structural Design; Environmental Design; and Project Management. The initial release of the Substation Workstation is recommended to include the workstation environment (including MENTOR -- a concept for on-line help, tutorials, notepad, a minor spreadsheet, and interfaces to other regular desktop functions) and portions of the first three functional modules listed above. Recommendations for progress beyond this first release of the workstation included the development of additional capabilities within the initial functional modules, as well as the development of the remaining modules. An overlap exists between the analytical requirements for this workstation and those already included in the EPRI TLWorkstation and the ICWorkstation. In some cases, elements of these other workstations are also suggested for incorporation into the Substation Workstation (such as the foundation analyses from the TLWorkstation), and in others, an assimilation of the other workstation into the Substation Workstation is recommended (as with the ICWorkstation). Estimated resources for implementing the recommended program, including both costs and development time, are also provided.

Mauser, S.F. (Power Technologies, Inc., Wilmerding, PA (United States)); Conroy, M.W. (Sargent and Lundy, Chicago, IL (United States)); Singh, N.M. (Power Computing, Dallas, TX (United States))

1993-03-01T23:59:59.000Z

486

The ABB LEBS system design  

SciTech Connect

The objectives of the U.S. Department of Energy (DOE) {open_quotes}Engineering Development of Advanced Coal-Fired Low-Emission Boiler Systems{close_quotes} (LEBS) project are to dramatically improve environmental performance of future pulverized coal-fired power plants, to increase their efficiency and to reduce their cost of electricity using near-term technologies, i.e., advanced technologies that are partially developed. The overall objective is to expedite commercialization of the technologies that are developed. The paper describes the work by the ABB team on the LEBS project which is part of the DOE`s Combustion 2000 Program. A major deliverable of the Project is the design of a 400 MWe commercial generating unit (CGU). The design being developed by the ABB team is projected to meet all the project objectives and to reduce emissions of NO{sub x}, SO{sub 2} and particulates to one-third to one-sixth NSPS limits while increasing net station efficiency significantly and reducing the cost of electricity. Development activities supporting the design work are described in the paper.

Regan, J.W.; Davidson, M.J.; Wesnor, J.D. [and others

1996-12-31T23:59:59.000Z

487

Design science as design of social systems --- implications for information systems research  

Science Conference Proceedings (OSTI)

There are indications that contemporary IS research is increasingly concerned with the organizational environment in which information systems are part of or used in. This means that IS design science approaches could benefit from concerning themselves ... Keywords: IS design, design science, organizational design, social systems design, socio-technical systems design

Andreas Drechsler

2012-05-01T23:59:59.000Z

488

Grading in interaction design education using design practitioners' conceptions of process quality  

Science Conference Proceedings (OSTI)

The designed product is often assessed in interaction design education, but there are also courses that focus on learning the design process. It is then necessary to develop criteria for grading in such courses. To make a successful transfer from theory ... Keywords: Assessment, Design education, Grading, Human-computer interaction education, Interaction design education, Process quality in design

Mattias Arvola

2012-11-01T23:59:59.000Z

489

GCFR shielding design and supporting experimental programs  

SciTech Connect

The shielding for the conceptual design of the gas-cooled fast breeder reactor (GCFR) is described, and the component exposure design criteria which determine the shield design are presented. The experimental programs for validating the GCFR shielding design methods and data (which have been in existence since 1976) are also discussed.

Perkins, R.G.; Hamilton, C.J.; Bartine, D.

1980-05-01T23:59:59.000Z

490

Slack analysis in the system design loop  

Science Conference Proceedings (OSTI)

We present a system-level technique to analyze the impact of design optimizations on system-level timing dependencies. This technique enables us to speed up the design cycle by substituting, in the design the loop, the time-consuming simulation step ... Keywords: slack analysis, system design loop, timing update

Girish Venkataramani; Seth C. Goldstein

2008-10-01T23:59:59.000Z

491

Design Concepts for a Superconducting Cable  

Science Conference Proceedings (OSTI)

Superconducting cables carry higher currents and, depending upon the design, can experience substantially lower transmission losses than conventional cables. This report discusses previous approaches to designing superconducting cables, describes the technical issues that must be considered when designing a high-temperature superconductor (HTS) cable, and presents several design concepts for an HTS cable.

1994-09-28T23:59:59.000Z

492

Evaluation of Contemporary Design of Reinforced Concrete ...  

Science Conference Proceedings (OSTI)

Page 1. Evaluation of Contemporary Design of Reinforced Concrete Lateral Resisting Systems Using Current Performance ...

2011-02-16T23:59:59.000Z

493

CALIFORNIA ENERGY Small HVAC System Design Guide  

E-Print Network (OSTI)

CALIFORNIA ENERGY COMMISSION Small HVAC System Design Guide DESIGNGUIDELINES October 2003 500;#12;Small HVAC System Design Guide Acknowledgements i Acknowledgements The products and outcomes presented; Darren Goody, PECI, Design Guide review. #12;Small HVAC System Design Guide Preface ii Preface The Small

494

Modeling complexity of enterprise routing design  

Science Conference Proceedings (OSTI)

Enterprise networks often have complex routing designs given the need to meet a wide set of resiliency, security and routing policies. In this paper, we take the position that minimizing design complexity must be an explicit objective of routing design. ... Keywords: network complexity, routing design, top-down modeling

Xin Sun; Sanjay G. Rao; Geoffrey G. Xie

2012-12-01T23:59:59.000Z

495

A sustainable design fiction: Green practices  

Science Conference Proceedings (OSTI)

In this article, we argue that an approach informed by practice theory coupled with design fiction provides useful insights into the role of interaction design with respect to environmental sustainability. We argue that a practice-oriented approach can ... Keywords: DIY, Design, Design Fiction, Everyday Practice, Repair, Social Practice, Sustainability

Ron Wakkary, Audrey Desjardins, Sabrina Hauser, Leah Maestri

2013-09-01T23:59:59.000Z

496

National Ignition Facility Title II Design Plan  

Science Conference Proceedings (OSTI)

This National Ignition Facility (NIF) Title II Design Plan defines the work to be performed by the NIF Project Team between November 1996, when the U.S. Department of Energy (DOE) reviewed Title I design and authorized the initiation of Title H design and specific long-lead procurements, and September 1998, when Title 11 design will be completed.

Kumpan, S

1997-03-01T23:59:59.000Z

497

VANDERBILTSENIOR DESIGN PROJECTS SCHOOL OF ENGINEERING  

E-Print Network (OSTI)

..............................................................................................9 Biogas to Electricity Conversion.................................................10 Design of Scalable Biogas Digester for the Developing World

Bordenstein, Seth

498

Design for Energy Efficiency in Residential Buildings  

E-Print Network (OSTI)

This paper presents the thermal design and heating design of an energy saving residential building in Beijing where the owners lived until 2004. Results show the advantages and disadvantages of a household-based heating mode by natural gas. Based on the quantity of natural gas by field tests in 2005, we conclude that thermal design influences heating design calculations.

Song, M.; Zhang, Y.; Yang, G.

2006-01-01T23:59:59.000Z

499

Scandinavian participatory design: dialogic curation with teenagers  

Science Conference Proceedings (OSTI)

Yarosh and colleagues voice a need to explicitly reveal values that drive our IDC research studies to avoid 'cargo cult science'. As Scandinavian Participatory Design (PD) approach is a highly values-led design approach, and is gaining importance in ... Keywords: Scandinavian participatory design, cultural museums, dialogic curation, interaction design, teenagers, values

Ole Sejer Iversen; Rachel Charlotte Smith

2012-06-01T23:59:59.000Z

500

Battery Thermal Management System Design Modeling (Presentation)  

DOE Green Energy (OSTI)

Presents the objectives and motivations for a battery thermal management vehicle system design study.

Kim, G-H.; Pesaran, A.

2006-10-01T23:59:59.000Z