Sample records for reduction technology tax

  1. Large Wind Property Tax Reduction

    Broader source: Energy.gov [DOE]

    In 2001, North Dakota established property tax reductions for commercial wind turbines constructed before 2011. Originally, the law reduced the taxable value of centrally-assessed* wind turbines...

  2. Corporate Property Tax Reduction for New/Expanded Generating Facilities

    Broader source: Energy.gov [DOE]

    Montana generating plants producing one megawatt (MW) or more with an alternative renewable energy source are eligible for the new or expanded industry property tax reduction. This incentive...

  3. RUTGERS UNIVERSITY 2011 TAX &TECHNOLOGY

    E-Print Network [OSTI]

    Lin, Xiaodong

    as a Technology update. This seminar is open to all CPAs in the Tri-State area as well as Rutgers Alumni. It is on the Board of the NJSCPA Mercer County chapter Robert Kenny, Esquire, Bob Kenny is a CPA,, JD. He is Past President of the NJSCPA's Mercer County Chapter. Bob is admitted to the Bar in 4 states including

  4. Stimulating Investment in Renewable Resources and Clean Coal Technology through a Carbon Tax:

    E-Print Network [OSTI]

    Nellie Zhao; Servia Rindfleish; Jay Foley; Jelena Pesic

    three tax rates. The substitution of clean coal technology for standard coal, which seems promising for

  5. Taxes, Permits, and the Adoption of Abatement Technology under...

    Open Energy Info (EERE)

    under tradable emissions permits (TEPs)- in contrast to taxes-decreases with the rate of technology adoption. However, in terms of welfare, the ranking of the instruments is not...

  6. Vehicle Technologies Office: National Idling Reduction Network...

    Office of Environmental Management (EM)

    Idling Reduction Network News Archives Vehicle Technologies Office: National Idling Reduction Network News Archives The National Idling Reduction Network brings together trucking...

  7. RMOTC to Test Oil Viscosity Reduction Technology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    RMOTC to Test Oil Viscosity Reduction Technology The Rocky Mountain Oilfield Testing Center (RMOTC) announces that the "Teapot Dome" oil field in Wyoming is hosting a series of...

  8. Institute a modest carbon tax to reduce carbon emissions, finance clean energy technology development, cut taxes, and reduce the deficit

    SciTech Connect (OSTI)

    Muro, Mark; Rothwell, Jonathan

    2012-11-15T23:59:59.000Z

    The nation should institute a modest carbon tax in order to help clean up the economy and stabilize the nationís finances. Specifically, Congress and the president should implement a $20 per ton, steadily increasing carbon excise fee that would discourage carbon dioxide emissions while shifting taxation onto pollution, financing energy efficiency (EE) and clean technology development, and providing opportunities to cut taxes or reduce the deficit. The net effect of these policies would be to curb harmful carbon emissions, improve the nationís balance sheet, and stimulate job-creation and economic renewal.

  9. Demonstrated Petroleum Reduction Using Oil Bypass Filter Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Demonstrated Petroleum Reduction Using Oil Bypass Filter Technology on Heavy and Light Vehicles Demonstrated Petroleum Reduction Using Oil Bypass Filter Technology on Heavy and...

  10. Idling Emissions Reduction Technology with Low Temperature Combustion...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Idling Emissions Reduction Technology with Low Temperature Combustion of DI Biodiesel and PFI n-Butanol Idling Emissions Reduction Technology with Low Temperature Combustion of DI...

  11. Sales Tax Credit for Clean Energy Technology (Tennessee)

    Broader source: Energy.gov [DOE]

    [http://www.dsireusa.org/documents/Incentives/TN71F-67.6.346.htm Tenn. Code Ann. Section 67-6-346] allows a taxpayer to take a credit, to apply for a refund of taxes paid, or to apply for...

  12. Utah Clean Cities Transportation Sector Petroleum Reduction Technologi...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    tiarravt043erickson2010p.pdf More Documents & Publications Utah Clean Cities Transportation Sector Petroleum Reduction Technologies Program Utah Clean Cities Transportation...

  13. A Review of Emerging Energy-efficiency and CO2 Emission-reduction Technologies for Cement and Concrete Production

    E-Print Network [OSTI]

    Hasanbeigi, Ali

    2014-01-01T23:59:59.000Z

    efficiency and CO2 Emission-reduction Technologies forefficiency and CO2 Emission- reduction Technologies forefficiency and CO2 Emission-reduction Technologies The

  14. Vehicle Technologies Office Merit Review 2015: Engine Friction Reduction Technologies

    Broader source: Energy.gov [DOE]

    Presentation given by Argonne National Laboratory at 2015 DOE Hydrogen and Fuel Cells Program and vehicle technologies office annual merit review and peer evaluation meeting about engine friction...

  15. Vehicle Technologies Office Merit Review 2014: Engine Friction Reduction Technologies

    Broader source: Energy.gov [DOE]

    Presentation given by Argonne National Laboratory at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about engine friction...

  16. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Construction Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings APS- Multifamily Energy Efficiency Program In order to meet Arizona's 22% energy reduction by 2020...

  17. Learning and cost reductions for generating technologies in the national energy modeling system (NEMS)

    E-Print Network [OSTI]

    Gumerman, Etan; Marnay, Chris

    2004-01-01T23:59:59.000Z

    of International Learning on Technology Cost. In Issues ofbetween initial new technology cost estimates and actualthe revolutionary technologies have cost reductions beyond

  18. 10.1177/0270467605279324BULLETIN OF SCIENCE, TECHNOLOGY & SOCIETY / October 2005Imboela / POVERTY REDUCTION IN ZAMBIA Poverty Reduction in Zambia

    E-Print Network [OSTI]

    Delaware, University of

    10.1177/0270467605279324BULLETIN OF SCIENCE, TECHNOLOGY & SOCIETY / October 2005Imboela / POVERTY REDUCTION IN ZAMBIA Poverty Reduction in Zambia: A Conceptual Analysis of the Zambian Poverty Reduction Poverty reduction strategy papers (PRSPs) present a recipient country's program of intent for the utiliza

  19. Power Tower Technology Roadmap and cost reduction plan.

    SciTech Connect (OSTI)

    Mancini, Thomas R.; Gary, Jesse A. (U.S. Department of Energy); Kolb, Gregory J.; Ho, Clifford Kuofei

    2011-04-01T23:59:59.000Z

    Concentrating solar power (CSP) technologies continue to mature and are being deployed worldwide. Power towers will likely play an essential role in the future development of CSP due to their potential to provide dispatchable solar electricity at a low cost. This Power Tower Technology Roadmap has been developed by the U.S. Department of Energy (DOE) to describe the current technology, the improvement opportunities that exist for the technology, and the specific activities needed to reach the DOE programmatic target of providing competitively-priced electricity in the intermediate and baseload power markets by 2020. As a first step in developing this roadmap, a Power Tower Roadmap Workshop that included the tower industry, national laboratories, and DOE was held in March 2010. A number of technology improvement opportunities (TIOs) were identified at this workshop and separated into four categories associated with power tower subsystems: solar collector field, solar receiver, thermal energy storage, and power block/balance of plant. In this roadmap, the TIOs associated with power tower technologies are identified along with their respective impacts on the cost of delivered electricity. In addition, development timelines and estimated budgets to achieve cost reduction goals are presented. The roadmap does not present a single path for achieving these goals, but rather provides a process for evaluating a set of options from which DOE and industry can select to accelerate power tower R&D, cost reductions, and commercial deployment.

  20. Stimulating Investment in Renewable Resources and Clean Coal Technology through a Carbon Tax:

    E-Print Network [OSTI]

    Nellie Zhao; Servia Rindfleish; Jay Foley; Jelena Pesic

    Energy supply and demand in China and India will be of premier importance to both nations in upcoming years. Both nations have ambitious goals for development, involving the expansion of the electricity supply to rural regions, as well as an increase in GDP, which will be accompanied by an increased demand for energy. The current distribution of electrical energy supply in each nation raises many concerns about sustainability and environmental viability. Electricity generation in both China and India relies heavily on coal, which raises environmental concern. Although there are likely to be severe consequences for continuing with the current energy mixes in China and India, there is also considerable resistance to change related to the generating cost of renewable energy supplies as well as the initial capital investment involved in changing infrastructures. Because mitigating environmental damages and social costs associated with CO2 emissions is not immediately economically beneficial on its own, the possibility of a tax on CO2 is introduced at three rates which serves to both internalize the costs associated with carbon emissions and motivate the restructuring of the energy distributions in India and China with more supply being met by renewables. An optimization routine based on Monte Carlo sampling was written and applied to this problem of determining optimal energy mixes for India and China based on the three tax rates. The substitution of clean coal technology for standard coal, which seems promising for both countries, is also investigated using the same optimization routine. Projections of electrical energy demand in 2030 were used as reference points for the investigation.

  1. Federal Fuel Cell Tax Incentives: An Investment in Clean and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fuel Cell Tax Incentives: An Investment in Clean and Efficient Technologies Federal Fuel Cell Tax Incentives: An Investment in Clean and Efficient Technologies A brief created by...

  2. Building Technologies Program: Tax Deduction Qualified Software- DOE-2.2 version 47d

    Broader source: Energy.gov [DOE]

    On this page you'll find information about the DOE-2.2 version 47d qualified computer software, which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings.

  3. Greenhouse Emission Reductions and Natural Gas Vehicles: A Resource Guide on Technology Options and Project Development

    SciTech Connect (OSTI)

    Orestes Anastasia; NAncy Checklick; Vivianne Couts; Julie Doherty; Jette Findsen; Laura Gehlin; Josh Radoff

    2002-09-01T23:59:59.000Z

    Accurate and verifiable emission reductions are a function of the degree of transparency and stringency of the protocols employed in documenting project- or program-associated emissions reductions. The purpose of this guide is to provide a background for law and policy makers, urban planners, and project developers working with the many Greenhouse Gas (GHG) emission reduction programs throughout the world to quantify and/or evaluate the GHG impacts of Natural Gas Vehicle (NGVs). In order to evaluate the GHG benefits and/or penalties of NGV projects, it is necessary to first gain a fundamental understanding of the technology employed and the operating characteristics of these vehicles, especially with regard to the manner in which they compare to similar conventional gasoline or diesel vehicles. Therefore, the first two sections of this paper explain the basic technology and functionality of NGVs, but focus on evaluating the models that are currently on the market with their similar conventional counterparts, including characteristics such as cost, performance, efficiency, environmental attributes, and range. Since the increased use of NGVs, along with Alternative Fuel Vehicle (AFVs) in general, represents a public good with many social benefits at the local, national, and global levels, NGVs often receive significant attention in the form of legislative and programmatic support. Some states mandate the use of NGVs, while others provide financial incentives to promote their procurement and use. Furthermore, Federal legislation in the form of tax incentives or procurement requirements can have a significant impact on the NGV market. In order to implement effective legislation or programs, it is vital to have an understanding of the different programs and activities that already exist so that a new project focusing on GHG emission reduction can successfully interact with and build on the experience and lessons learned of those that preceded it. Finally, most programs that deal with passenger vehicles--and with transportation in general--do not address the climate change component explicitly, and thus there are few GHG reduction goals that are included in these programs. Furthermore, there are relatively few protocols that exist for accounting for the GHG emissions reductions that arise from transportation and, specifically, passenger vehicle projects and programs. These accounting procedures and principles gain increased importance when a project developer wishes to document in a credible manner, the GHG reductions that are achieved by a given project or program. Section four of this paper outlined the GHG emissions associated with NGVs, both upstream and downstream, and section five illustrated the methodology, via hypothetical case studies, for measuring these reductions using different types of baselines. Unlike stationary energy combustion, GHG emissions from transportation activities, including NGV projects, come from dispersed sources creating a need for different methodologies for assessing GHG impacts. This resource guide has outlined the necessary context and background for those parties wishing to evaluate projects and develop programs, policies, projects, and legislation aimed at the promotion of NGVs for GHG emission reduction.

  4. Optimal Deployment Plan of Emission Reduction Technologies for TxDOT's Construction Equipment†

    E-Print Network [OSTI]

    Bari, Muhammad Ehsanul

    2010-10-12T23:59:59.000Z

    ................................................ 13 Emission Reduction Options .......................................................... 15 Exhaust Gas Aftertreatment Technologies for Emissions Reductions... Page Figure 15 Total NOx Reduction at the First Stage at Different Budget Amounts (Case 2A) ........................................................................... 66 Figure 16 Total NOx Reduction at the First and Second Stage...

  5. Review of technical literature and trends related to automobile mass-reduction technology

    E-Print Network [OSTI]

    Lutsey, Nicholas P.

    2010-01-01T23:59:59.000Z

    engine cradle for weight reductions that vary from 1 to 12 lbs for technologies that have been used by General Motors,

  6. Technology Evaluation for Conditioning of Hanford Tank Waste Using Solids Segregation and Size Reduction

    SciTech Connect (OSTI)

    Restivo, Michael L.; Stone, M. E.; Herman, D. T.; Lambert, Daniel P.; Duignan, Mark R.; Smith, Gary L.; Wells, Beric E.; Lumetta, Gregg J.; Enderlin, Carl W.; Adkins, Harold E.

    2014-04-24T23:59:59.000Z

    The Savannah River National Laboratory and the Pacific Northwest National Laboratory team performed a literature search on current and proposed technologies for solids segregation and size reduction of particles in the slurry feed from the Hanford Tank Farm. The team also investigated technology research performed on waste tank slurries, both real and simulated, and reviewed academic theory applicable to solids segregation and size reduction. This review included text book applications and theory, commercial applications suitable for a nuclear environment, research of commercial technologies suitable for a nuclear environment, and those technologies installed in a nuclear environment, including technologies implemented at Department of Energy facilities. Information on each technology is provided in this report along with the advantages and disadvantages of the technologies for this application. Any technology selected would require testing to verify the ability to meet the High-Level Waste Feed Waste Acceptance Criteria to the Hanford Tank Waste Treatment and Immobilization Plant Pretreatment Facility.

  7. Rooftop Membrane Temperature Reductions with Green Roof Technology in South-Central Texas

    E-Print Network [OSTI]

    Dvorak, B.

    Early green roof cooling and energy reduction research in North America took place in Canada and the northern latitudes of the United States, where green roofs reduced rooftop temperatures by 70% to 90%. Less is known about green roof technology...

  8. Utah Clean Cities Transportation Sector Petroleum Reduction Technologi...

    Broader source: Energy.gov (indexed) [DOE]

    U.S. DOE HYDROGEN and FUEL CELLS PROGRAM and VEHICLE TECHNOLOGIES PROGRAM ANNUAL MERIT REVIEW AND PEER EVALUATION MEETING MAY 14-18, 2012 This presentation does not contain any...

  9. TECHNOLOGY EVALUATION FOR CONDITIONING OF HANFORD TANK WASTE USING SOLIDS SEGREGATION AND SIZE REDUCTION

    SciTech Connect (OSTI)

    Restivo, M.; Stone, M.; Herman, D.; Lambert, D.; Duignan, M.; SMITH, G.; WELLS, B.; LUMETTA, G.; ENDRELIN, C.; ADKINS, H.

    2014-04-15T23:59:59.000Z

    The Savannah River National Laboratory (SRNL) and the Pacific Northwest National Laboratory (PNNL) team performed a literature search on current and proposed technologies for solids segregation and size reduction of particles in the slurry feed from the Hanford Tank Farm (HTF). The team also investigated technology research performed on waste tank slurries, both real and simulated, and reviewed academic theory applicable to solids segregation and size reduction. This review included text book applications and theory, commercial applications suitable for a nuclear environment, research of commercial technologies suitable for a nuclear environment, and those technologies installed in a nuclear environment, including technologies implemented at Department of Energy (DOE) facilities. Information on each technology is provided in this report along with the advantages and disadvantages of the technologies for this application.

  10. Coolerado Cooler Helps to Save Cooling Energy and Dollars: New Cooling Technology Targets Peak Load Reduction

    SciTech Connect (OSTI)

    Robichaud, R.

    2007-06-01T23:59:59.000Z

    This document is about a new evaporative cooling technology that can deliver cooler supply air temperatures than either direct or indirect evaporative cooling systems, without increasing humidity. The Coolerado Cooler technology can help Federal agencies reach the energy-use reduction goals of EPAct 2005, particularly in the western United States.

  11. A Novel Technology for the Reduction of NOx on Char by Microwaves†

    E-Print Network [OSTI]

    Buenger, C.; Peterson, E.

    1994-01-01T23:59:59.000Z

    of these applications. The technology is directed at NOx reduction but may also address other pollutants like SO2. The technology employees char, a heat treated and devolitilized form of coal, to adsorb NOx from the flue (or waste) gas. Adsorption of greater than 99...

  12. Reduction of Nitrogen Oxide Emissions for lean Burn Engine Technology

    SciTech Connect (OSTI)

    McGill, R.N.

    1998-08-04T23:59:59.000Z

    Lean-burn engines offer the potential for significant fuel economy improvements in cars and trucks, perhaps the next great breakthrough in automotive technology that will enable greater savings in imported petroleum. The development of lean-burn engines, however, has been an elusive goal among automakers because of the emissions challenges associated with lead-burn engine technology. Presently, cars operate with sophisticated emissions control systems that require the engine's air-fuel ratio to be carefully controlled around the stoichiometric point (chemically correct mixture). Catalysts in these systems are called "three-way" catalysts because they can reduce hydrocarbon, carbon monoxide, and nitrogen oxide emissions simultaneously, but only because of the tight control of the air-fuel ratio. The purpose of this cooperative effort is to develop advanced catalyst systems, materials, and necessary engine control algorithms for reducing NOX emissions in oxygen-rich automotive exhaust (as with lean-burn engine technology) to meet current and near-future mandated Clean Air Act standards. These developments will represent a breakthrough in both emission control technology and automobile efficiency. The total project is a joint effort among five national laboratories, together with US CAR. The role of Lockheed-Martin Energy Systems in the total project is two fold: characterization of catalyst performance through laboratory evaluations from bench-scale flow reactor tests to engine laboratory tests of full-scale prototype catalysts, and microstructural characterization of catalyst material before and after test stand and/or engine testing.

  13. Federal Tax Policy towards Energy Gilbert E. Metcalf, Tufts University and NBER

    E-Print Network [OSTI]

    and investment tax credits make clean coal technologies cost competi- tive with pulverized coal and wind

  14. Load Reduction, Demand Response and Energy Efficient Technologies and Strategies

    SciTech Connect (OSTI)

    Boyd, Paul A.; Parker, Graham B.; Hatley, Darrel D.

    2008-11-19T23:59:59.000Z

    The Department of Energyís (DOEís) Pacific Northwest National Laboratory (PNNL) was tasked by the DOE Office of Electricity (OE) to recommend load reduction and grid integration strategies, and identify additional demand response (energy efficiency/conservation opportunities) and strategies at the Forest City Housing (FCH) redevelopment at Pearl Harbor and the Marine Corps Base Hawaii (MCBH) at Kaneohe Bay. The goal was to provide FCH staff a path forward to manage their electricity load and thus reduce costs at these FCH family housing developments. The initial focus of the work was at the MCBH given the MCBH has a demand-ratchet tariff, relatively high demand (~18 MW) and a commensurate high blended electricity rate (26 cents/kWh). The peak demand for MCBH occurs in July-August. And, on average, family housing at MCBH contributes ~36% to the MCBH total energy consumption. Thus, a significant load reduction in family housing can have a considerable impact on the overall site load. Based on a site visit to the MCBH and meetings with MCBH installation, FCH, and Hawaiian Electric Company (HECO) staff, recommended actions (including a "smart grid" recommendation) that can be undertaken by FCH to manage and reduce peak-demand in family housing are made. Recommendations are also made to reduce overall energy consumption, and thus reduce demand in FCH family housing.

  15. Combined SO sub 2 /NO sub x reduction technology

    SciTech Connect (OSTI)

    Livengood, C.D.; Huang, H.S. (Argonne National Lab., IL (United States)); Markussen, J.M. (USDOE Pittsburgh Energy Technology Center, PA (United States))

    1992-01-01T23:59:59.000Z

    Enactment of the Clean Air Act Amendments and passage of state legislation leading to more stringent nitrogen oxides (NO{sub x}) regulations have fueled research and development efforts on technologies for the combined control of sulfur dioxide (SO{sub 2}) and NO{sub x}. The integrated removal of both SO{sub 2} and NO{sub x}, in a single system can offer significant advantages over the use of several separate processes, including such factors as reduced system complexity, better operability, and lower costs. This paper reviews the status of a number of integrated flue-gas-cleanup (FGC) systems that have reached a significant stage of development, focusing on post-combustion processes that have been tested or are ready for testing at the pilot scale or larger. A brief process description, a summary of the development status and performance achieved to date, pending commercialization issues, and process economics (when available) are given for each technology.

  16. Idling Emissions Reduction Technology with Low Temperature Combustion of DI

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(Fact Sheet),Energy Petroleum TechnologyEnergy Rules forRequirements

  17. Energy Saving Melting and Revert Reduction Technology (Energy SMARRT): Manufacturing Advanced Engineered Components Using Lost Foam Casting Technology

    SciTech Connect (OSTI)

    Harry Littleton; John Griffin

    2011-07-31T23:59:59.000Z

    This project was a subtask of Energy Saving Melting and Revert Reduction Technology (√?¬Ę√?¬?√?¬?Energy SMARRT√?¬Ę√?¬?√?¬Ě) Program. Through this project, technologies, such as computer modeling, pattern quality control, casting quality control and marketing tools, were developed to advance the Lost Foam Casting process application and provide greater energy savings. These technologies have improved (1) production efficiency, (2) mechanical properties, and (3) marketability of lost foam castings. All three reduce energy consumption in the metals casting industry. This report summarizes the work done on all tasks in the period of January 1, 2004 through June 30, 2011. Current (2011) annual energy saving estimates based on commercial introduction in 2011 and a market penetration of 97% by 2020 is 5.02 trillion BTU√?¬Ę√?¬?√?¬?s/year and 6.46 trillion BTU√?¬Ę√?¬?√?¬?s/year with 100% market penetration by 2023. Along with these energy savings, reduction of scrap and improvement in casting yield will result in a reduction of the environmental emissions associated with the melting and pouring of the metal which will be saved as a result of this technology. The average annual estimate of CO2 reduction per year through 2020 is 0.03 Million Metric Tons of Carbon Equivalent (MM TCE).

  18. Presentation 3.1: Report on energy efficient technologies and CO2 reduction potentials in the pulp and paper industry

    E-Print Network [OSTI]

    Presentation 3.1: Report on energy efficient technologies and CO2 reduction potentials in the pulp INTERNATIONALE DE L'ENERGIE Report on Energy Efficient Technologies and CO2 Reduction Potentials in the Pulp Technologies and Systems IETS and International Coordination Workshop Conclusions 253 #12;INTERNATIONAL ENERGY

  19. Tax Incentives

    Broader source: Energy.gov (indexed) [DOE]

    of 1992, allows owners of qualified over a 10-year period. Qualified wind wind turbines (indexed for inflation). - The federal Renewable Electricity Production Tax Credit...

  20. Comprehensive Report to Congress Clean Coal Technology Program: Clean power from integrated coal/ore reduction

    SciTech Connect (OSTI)

    NONE

    1996-10-01T23:59:59.000Z

    This report describes a clean coal program in which an iron making technology is paired with combined cycle power generation to produce 3300 tons per day of hot metal and 195 MWe of electricity. The COREX technology consists of a metal-pyrolyzer connected to a reduction shaft, in which the reducing gas comes directly from coal pyrolysis. The offgas is utilized to fuel a combined cycle power plant.

  1. Educating Consumers: New Content on Diesel Vehicles, Diesel Exhaust Fluid, and Selective Catalytic Reduction Technologies on the AFDC (Presentation)

    SciTech Connect (OSTI)

    Brodt-Giles, D.

    2008-08-05T23:59:59.000Z

    Presentation covers new content available on the Alternative Fuels and Advanced Vehicle Data Center regarding diesel vehicles, diesel exhaust fluid, and selective catalytic reduction technologies.

  2. Optimal Deployment Plan of Emission Reduction Technologies for TxDOT's Construction Equipment

    E-Print Network [OSTI]

    Bari, Muhammad Ehsanul

    2010-10-12T23:59:59.000Z

    to trees, crops, plants, lakes, and animals. Therefore, air pollution is indeed a big concern for the environment (EPA 2008a). Impacts of Emissions Air pollution has significant health, environmental, and economic impacts. Inhaling polluted air... ............................................. 22 Fuel Technologies for Emissions Reductions ......................... 23 Low-Sulfur Diesel (LSD) and Ultra Low Sulfur Diesel (ULSD) ............................................................................. 23 Natural...

  3. Learning and cost reductions for generating technologies in the national energy modeling system (NEMS)

    SciTech Connect (OSTI)

    Gumerman, Etan; Marnay, Chris

    2004-01-16T23:59:59.000Z

    This report describes how Learning-by-Doing (LBD) is implemented endogenously in the National Energy Modeling System (NEMS) for generating plants. LBD is experiential learning that correlates to a generating technology's capacity growth. The annual amount of Learning-by-Doing affects the annual overnight cost reduction. Currently, there is no straightforward way to integrate and make sense of all the diffuse information related to the endogenous learning calculation in NEMS. This paper organizes the relevant information from the NEMS documentation, source code, input files, and output files, in order to make the model's logic more accessible. The end results are shown in three ways: in a simple spreadsheet containing all the parameters related to endogenous learning; by an algorithm that traces how the parameters lead to cost reductions; and by examples showing how AEO 2004 forecasts the reduction of overnight costs for generating technologies over time.

  4. Vehicle Technologies Office Merit Review 2015: Engine Friction Reduction Ė Part II (Base fluid and additive technologies)

    Broader source: Energy.gov [DOE]

    Presentation given by Argonne National Laboratory at 2015 DOE Hydrogen and Fuel Cells Program and vehicle technologies office annual merit review and peer evaluation meeting about engine friction...

  5. Technological cost-reduction pathways for attenuator wave energy converters in the marine hydrokinetic environment.

    SciTech Connect (OSTI)

    Bull, Diana L; Ochs, Margaret Ellen

    2013-09-01T23:59:59.000Z

    This report considers and prioritizes the primary potential technical costreduction pathways for offshore wave activated body attenuators designed for ocean resources. This report focuses on technical research and development costreduction pathways related to the device technology rather than environmental monitoring or permitting opportunities. Three sources of information were used to understand current cost drivers and develop a prioritized list of potential costreduction pathways: a literature review of technical work related to attenuators, a reference device compiled from literature sources, and a webinar with each of three industry device developers. Data from these information sources were aggregated and prioritized with respect to the potential impact on the lifetime levelized cost of energy, the potential for progress, the potential for success, and the confidence in success. Results indicate the five most promising costreduction pathways include advanced controls, an optimized structural design, improved power conversion, planned maintenance scheduling, and an optimized device profile.

  6. Reduction

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection RadiationRecord-SettingHead of ContractingofReducing WasteReduction

  7. Carbon Taxes: A Review of Experience and Policy Design Considerations

    SciTech Connect (OSTI)

    Sumner, J.; Bird, L.; Smith, H.

    2009-12-01T23:59:59.000Z

    State and local governments in the United States are evaluating a wide range of policies to reduce carbon emissions, including, in some instances, carbon taxes, which have existed internationally for nearly 20 years. This report reviews existing carbon tax policies both internationally and in the United States. It also analyzes carbon policy design and effectiveness. Design considerations include which sectors to tax, where to set the tax rate, how to use tax revenues, what the impact will be on consumers, and how to ensure emissions reduction goals are achieved. Emission reductions that are due to carbon taxes can be difficult to measure, though some jurisdictions have quantified reductions in overall emissions and other jurisdictions have examined impacts that are due to programs funded by carbon tax revenues.

  8. Effective tax planning for Mexican operations

    SciTech Connect (OSTI)

    Smith, W.J.A.; Rodriguez, E.

    1981-06-01T23:59:59.000Z

    Differences in Mexico's economic and tax systems make it important for foreign investors in oil and gas development to understand these protective policies and investment barriers. American investors, for example, should plan for technology-based opportunities. Among the tax opportunities described are those dealing with site selection, type of ownership, foreign tax credits, income sourcing, and the use of a Domestic International Sales Corporation (DISC). (DCK)

  9. A fuel cycle framework for evaluating greenhouse gas emission reduction technology

    SciTech Connect (OSTI)

    Ashton, W.B.; Barns, D.W. (Pacific Northwest Lab., Richland, WA (USA)); Bradley, R.A. (USDOE Office of Policy, Planning and Analysis, Washington, DC (USA). Office of Environmental Analysis)

    1990-05-01T23:59:59.000Z

    Energy-related greenhouse gas (GHG) emissions arise from a number of fossil fuels, processes and equipment types throughout the full cycle from primary fuel production to end-use. Many technology alternatives are available for reducing emissions based on efficiency improvements, fuel switching to low-emission fuels, GHG removal, and changes in end-use demand. To conduct systematic analysis of how new technologies can be used to alter current emission levels, a conceptual framework helps develop a comprehensive picture of both the primary and secondary impacts of a new technology. This paper describes a broad generic fuel cycle framework which is useful for this purpose. The framework is used for cataloging emission source technologies and for evaluating technology solutions to reduce GHG emissions. It is important to evaluate fuel mix tradeoffs when investigating various technology strategies for emission reductions. For instance, while substituting natural gas for coal or oil in end-use applications to reduce CO{sub 2} emissions, natural gas emissions of methane in the production phase of the fuel cycle may increase. Example uses of the framework are given.

  10. Payroll, Taxes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > TheNuclear AstrophysicsPayroll, Taxes Payroll, Taxes Payroll

  11. Evaluation of technologies for volume reduction of plutonium-contaminated soils from the Nevada Test Site

    SciTech Connect (OSTI)

    Papelis, C.; Jacobson, R.L.; Miller, F.L.; Shaulis, L.K.

    1996-06-01T23:59:59.000Z

    Nuclear testing at and around the Nevada Test Site (NTS) resulted in plutonium (Pu) contamination of the soil over an area of several thousands of acres. The objective of this project was to evaluate the potential of five different processes to reduce the volume of Pu-contaminated soil from three different areas, namely Areas 11, 13, and 52. Volume reduction was to be accomplished by concentrating the Pu into a small but highly contaminated soil fraction, thereby greatly reducing the volume of soil requiring disposal. The processes tested were proposed by Paramag Corp. (PARAMAG), Advanced Processing Technologies Inc. (APT), Lockheed Environmental Systems and Technologies (LESAT), Nuclear Remediation Technologies (NRT), and Scientific Ecology Group (SEG). Because of time and budgetary restraints, the NRT and SEG processes were tested with soil from Area 11 only. These processes typically included a preliminary soil conditioning step (e.g., attrition scrubbing, wet sieving), followed by a more advanced process designed to separate Pu from the soil, based on physiochemical properties of Pu compounds (e.g., magnetic susceptibility, specific gravity). Analysis of the soil indicates that a substantial fraction of the total Pu contamination is typically confined in a relatively narrow and small particle size range. Processes which were able to separate this highly contaminated soil fraction (using physical methods, e.g., attrition scrubbing, wet sieving), from the rest of the soil achieved volume (mass) reductions on the order of 70%. The advanced, more complex processes tested did not enhance volume reduction. The primary reason why processes that rely on the dependence of settling velocity on density differences failed was the very fine grain size of the Pu-rich particles.

  12. Clean coal technology: selective catalytic reduction (SCR) technology for the control of nitrogen oxide emissions from coal-fired boilers

    SciTech Connect (OSTI)

    NONE

    2005-05-01T23:59:59.000Z

    The report discusses a project carried out under the US Clean Coal Technology (CCT) Demonstration Program which demonstrated selective catalytic reduction (SCR) technology for the control of NOx emissions from high-sulphur coal-fired boilers under typical boilers conditions in the United States. The project was conducted by Southern Company Services, Inc., who served as a co-funder and as the host at Gulf Power Company's Plant Crist. The SCR process consists of injecting ammonia (NH{sub 3}) into boiler flue gas and passing the flue gas through a catalyst bed where the Nox and NH{sub 3} react to form nitrogen and water vapor. The results of the CCTDP project confirmed the applicability of SCR for US coal-fired power plants. In part as a result of the success of this project, a significant number of commercial SCR units have been installed and are operating successfully in the United States. By 2007, the total installed SCR capacity on US coal-fired units will number about 200, representing about 100,000 MWe of electric generating capacity. This report summarizes the status of SCR technology. 21 refs., 3 figs., 2 tabs., 10 photos.

  13. Energy-Saving Melting and Revert Reduction Technology (E-SMARRT): Final Summary Report

    SciTech Connect (OSTI)

    White, Thornton C [SCRA Appiled R& D

    2014-03-31T23:59:59.000Z

    Energy-Saving Melting and Revert Reduction Technology (E-SMARRT) is a balanced portfolio of R&D tasks that address energy-saving opportunities in the metalcasting industry. E-SMARRT was created to: ē Improve important capabilities of castings ē Reduce carbon footprint of the foundry industry ē Develop new job opportunities in manufacturing ē Significantly reduce metalcasting process energy consumption and includes R&D in the areas of: ē Improvements in Melting Efficiency ē Innovative Casting Processes for Yield Improvement/Revert Reduction ē Instrumentation and Control Improvement ē Material properties for Casting or Tooling Design Improvement The energy savings and process improvements developed under E-SMARRT have been made possible through the unique collaborative structure of the E-SMARRT partnership. The E-SMARRT team consisted of DOEís Office of Industrial Technology, the three leading metalcasting technical associations in the U.S: the American Foundry Society; the North American Die Casting Association; and the Steel Foundersí Society of America; and SCRA Applied R&D, doing business as the Advanced Technology Institute (ATI), a recognized leader in distributed technology management. This team provided collaborative leadership to a complex industry composed of approximately 2,000 companies, 80% of which employ less than 100 people, and only 4% of which employ more than 250 people. Without collaboration, these new processes and technologies that enable energy efficiencies and environment-friendly improvements would have been slow to develop and had trouble obtaining a broad application. The E-SMARRT R&D tasks featured low-threshold energy efficiency improvements that are attractive to the domestic industry because they do not require major capital investment. The results of this portfolio of projects are significantly reducing metalcasting process energy consumption while improving the important capabilities of metalcastings. Through June 2014, the E-SMARRT program predicts an average annual estimated savings of 59 Trillion BTUs per year over a 10 year period through Advanced Melting Efficiencies and Innovative Casting Processes. Along with these energy savings, an estimated average annual estimate of CO2 reduction per year over a ten year period is 3.56 Million Metric Tons of Carbon Equivalent (MM TCE).

  14. Energy Replacement Generation Tax Exemption

    Broader source: Energy.gov [DOE]

    Under the Energy Replacement Generation Tax Exemption, the following facilities are exempt from the replacement tax:

  15. Ethanol Production Tax Credit (Kentucky) | Open Energy Information

    Open Energy Info (EERE)

    Credit (Kentucky) Policy Category Financial Incentive Policy Type Corporate Tax Incentive Affected Technologies BiomassBiogas Active Policy Yes Implementing Sector StateProvince...

  16. Energy Saving Melting and Revert Reduction Technology (E-SMARRT): Design Support for Tooling Optimization

    SciTech Connect (OSTI)

    Wang, Dongtao

    2011-09-23T23:59:59.000Z

    High pressure die casting is an intrinsically efficient net shape process and improvements in energy efficiency are strongly dependent on design and process improvements that reduce scrap rates so that more of the total consumed energy goes into acceptable, usable castings. Computer simulation has become widely used within the industry but use is not universal. Further, many key design decisions must be made before the simulation can be run and expense in terms of money and time often limits the number of decision iterations that can be explored. This work continues several years of work creating simple, very fast, design tools that can assist with the early stage design decisions so that the benefits of simulation can be maximized and, more importantly, so that the chances of first shot success are maximized. First shot success and better running processes contributes to less scrap and significantly better energy utilization by the process. This new technology was predicted to result in an average energy savings of 1.83 trillion BTUs/year over a 10 year period. Current (2011) annual energy saving estimates over a ten year period, based on commercial introduction in 2012, a market penetration of 30% by 2015 is 1.89 trillion BTUs/year by 2022. Along with these energy savings, reduction of scrap and improvement in yield will result in a reduction of the environmental emissions associated with the melting and pouring of the metal which will be saved as a result of this technology. The average annual estimate of CO2 reduction per year through 2022 is 0.037 Million Metric Tons of Carbon Equivalent (MM TCE).

  17. Green Energy Tax Credit

    Broader source: Energy.gov [DOE]

    In addition to the Green Energy Tax Credit, the Carbon Tax Credit is available. This is the only carbon tax credit in the United States and it provides "certified green energy supply chain...

  18. Restoration Tax Abatement (Louisiana)

    Broader source: Energy.gov [DOE]

    Restoration Tax Abatement (RTA) Program provides five-year property tax abatement for the expansion, restoration, improvement, and development of existing commercial structures and owner-occupied...

  19. Advanced and developmental technologies for treatment and volume reduction of dry active wastes

    SciTech Connect (OSTI)

    Kohout, R. [R. Kohout & Associates, Ltd., Toronto (Canada)

    1994-12-31T23:59:59.000Z

    The nuclear power industry processes Dry Active Wastes (DAW) to achieve cost-effective volume reduction and/or to produce a residue that is more compatible with final disposal criteria. The two principal processes currently used by the industry are compaction and incineration. Although incineration is often considered the process of choice, capital and operating cost are often high, and in some countries, public opposition and lengthy permitting processes result in expensive delays to bringing the process to operation. Therefore, alternative treatment options (mechanical, thermal, chemical, and biological) are being investigated to provide timely, cost-effective options for industry use. An overview of those developmental processes considered applicable to processing DAW is presented. In each category, {open_quotes}established{close_quotes} processes are mentioned and/or referenced, but the focus is on {open_quotes}potential{close_quotes} technologies and the status of their development. The emphasis is on processing DAW, and therefore, those developmental processes that primarily treat solids in aqueous streams and melting/sintering technologies, both of lesser applicability to nuclear utility wastes, have been omitted. Included are those developmental technologies that appear to have a potential for radioactive waste application based on development on demonstration programs.

  20. New technology for sulfide reduction and increased oil recovery. Third quarter progress report

    SciTech Connect (OSTI)

    NONE

    1998-03-20T23:59:59.000Z

    Project work was initiated by Geo-Microbial Technologies, Inc. (GMT), Ochelata, Oklahoma for Contract Number DE-FG01-97EE15659 on June 18, 1997. The purpose of this project is to demonstrate reduction of sulfide contamination, as well as possible improvement of production in oil and gas production systems. This will be accomplished by application of the BioCompetitive Exclusion (BCX) process developed by GMT. A broad spectrum of well types and geographical locations is anticipated. The BCX process is designed to manipulate indigenous reservoir bacteria with the addition of synergistic inorganic chemical formulae. These treatments will stimulate growth of beneficial microbes, while suppressing metabolic activity of sulfate reducing bacteria (SRB), the primary source of harmful sulfide production.

  1. Tax Incentives

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssues DOE'sSummaryDepartmentEnergyonWIPPDepartmentBlueTax

  2. Emerging Energy-efficiency and CO2 Emission-reduction Technologies for Cement and Concrete Production

    E-Print Network [OSTI]

    Hasanbeigi, Ali

    2013-01-01T23:59:59.000Z

    to install flue-gas desulphurization, NOx reduction, and aefficiency flue gas desulphurization and de-NO x to meet

  3. The East Tennessee Technology Park Progress Report for the Tennessee Hazardous Waste Reduction Act for Calendar Year 1999

    SciTech Connect (OSTI)

    Bechtel Jacobs Company LLC

    2000-03-01T23:59:59.000Z

    This report is prepared for the East Tennessee Technology Park (formerly the Oak Ridge K-25 Site) (ETTP) in compliance with the ''Tennessee Hazardous Waste Reduction Act of 1990'' (THWRA) (TDEC 1990), Tennessee Code Annotated 68-212-306. Annually, THWRA requires a review of the site waste reduction plan, completion of summary waste reduction information as part of the site's annual hazardous waste reporting, and completion of an annual progress report analyzing and quantifying progress toward THWRA-required waste stream-specific reduction goals. This THWRA-required progress report provides information about ETTP's hazardous waste streams regulated under THWRA and waste reduction progress made in calendar year (CY) 1999. This progress report also documents the annual review of the site plan, ''Oak Ridge Operations Environmental Management and Enrichment Facilities (EMEF) Pollution Prevention Program Plan'', BJC/OR-306/R1 (Bechtel Jacobs Company 199a). In 1996, ETTP established new goal year ratios that extended the goal year to CY 1999 and targeted 50 percent waste stream-specific reduction goals. In CY 1999, these CY 1999 goals were extended to CY 2000 for all waste streams that generated waste in 1999. Of the 70 ETTP RCRA waste streams tracked in this report from base years as early as CY 1991, 51 waste streams met or exceeded their reduction goal based on the CY 1999 data.

  4. The East Tennessee Technology Park Progress Report for the Tennessee Hazardous Waste Reduction Act for Calendar Year 2000

    SciTech Connect (OSTI)

    Bechtel Jacobs Company LLC

    2001-03-01T23:59:59.000Z

    This report is prepared for the East Tennessee Technology Park (formerly the Oak Ridge K-25 Site) (ETTP) in compliance with the ''Tennessee Hazardous Waste Reduction Act of 1990'' (THWRA) (TDEC 1990), Tennessee Code Annotated 68-212-306. Annually, THWRA requires a review of the site waste reduction plan, completion of summary waste reduction information as part of the site's annual hazardous waste reporting, and completion of an annual progress report analyzing and quantifying progress toward THWRA-required waste stream-specific reduction goals. This THWRA-required progress report provides information about ETTP's hazardous waste streams regulated under THWRA and waste reduction progress made in calendar year (CY) 2000. This progress report also documents the annual review of the site plan, ''Oak Ridge Operations Environmental Management and Enrichment Facilities (EMEF) Pollution Prevention Program Plan'', BJC/OR-306/R1 (Bechtel Jacobs Company 2000). In 1996, ETTP established new goal year ratios that extended the goal year to CY 1999 and targeted 50 percent waste stream-specific reduction goals. In CY 2000, these goals were extended to CY 2001 for all waste streams that generated waste in 2000. Of the 70 ETTP RCRA waste streams tracked in this report from base years as early as CY 1991, 50 waste streams met or exceeded their reduction goal based on the CY 2000 data.

  5. Emerging Energy-efficiency and CO2 Emission-reduction Technologies for Cement and Concrete Production

    E-Print Network [OSTI]

    Hasanbeigi, Ali

    2013-01-01T23:59:59.000Z

    24 3.5. Emerging Carbon Capture Technologies for the CementGmbH (ECRA), 2007. Carbon Capture Technology - Options andEmerging carbon capture technologies for the cement industry

  6. Tax Measurement and Lag'don Tax

    E-Print Network [OSTI]

    Surkhang, Wangchen

    1966-02-21T23:59:59.000Z

    ). 2. These districts are: gnya' nang, skyid grong, rong shar, rdf,(lng dza', shtl dkar, glint skyes. ~. The Full Assembly consists of: all the government officials exeept the Regent and the Ministers of State (bka' blon); all the acting and retired... TAX MEASUREMENT AND LAG'DON TAX -WANGCHEN SURlCHANG Since in any discussion of taxes (in Tibetan: khręl) aD understanding of the units involved is a prerequisite, I Ihall describe these before dealing with the actual taxes. The basic unit...

  7. State Clean Energy Policies Analysis (SCEPA): State Tax Incentives

    SciTech Connect (OSTI)

    Lantz, E.; Doris, E.

    2009-10-01T23:59:59.000Z

    As a policy tool, state tax incentives can be structured to help states meet clean energy goals. Policymakers often use state tax incentives in concert with state and federal policies to support renewable energy deployment or reduce market barriers. This analysis used case studies of four states to assess the contributions of state tax incentives to the development of renewable energy markets. State tax incentives that are appropriately paired with complementary state and federal policies generally provide viable mechanisms to support renewable energy deployment. However, challenges to successful implementation of state tax incentives include serving project owners with limited state tax liability, assessing appropriate incentive levels, and differentiating levels of incentives for technologies with different costs. Additionally, state tax incentives may result in moderately higher federal tax burdens. These challenges notwithstanding, state tax incentives that consider certain policy design characteristics can support renewable energy markets and state clean energy goals.The scale of their impact though is directly related to the degree to which they support the renewable energy markets for targeted sectors and technologies. This report highlights important policy design considerations for policymakers using state tax incentives to meet clean energy goals.

  8. Review of technical literature and trends related to automobile mass-reduction technology

    E-Print Network [OSTI]

    Lutsey, Nicholas P.

    2010-01-01T23:59:59.000Z

    Cycle Analysis of New Automobile Technologies. Mass. Inst.Technologies in Automobiles. Ē Aluminum Association. http://Consumption of New U.S. Automobiles by 2035. Ē Massachusetts

  9. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Photovoltaics Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Residential Renewable Energy Tax Credit Established by The Energy Policy Act of 2005, the federal tax...

  10. Jobs Tax Credit (Wisconsin)

    Broader source: Energy.gov [DOE]

    Businesses relocating to Wisconsin or expanding in Wisconsin that are creating full-time employment may be eligible for The Jobs Tax Credit . Jobs created as a result of the tax credit must be...

  11. Refundable Payroll Tax Credit

    Broader source: Energy.gov [DOE]

    '''''Note: [http://www.legislature.mi.gov/documents/2011-2012/publicact/pdf/2011-PA-... Public Act 38 of 2011] repealed the Michigan Business Tax (MBT) and implemented the Corporate Income Tax (CIT...

  12. Energy Saving Melting and Revert Reduction Technology (Energy SMARRT): Development of CCT Diagrams

    SciTech Connect (OSTI)

    L. Scott Chumbley

    2011-08-20T23:59:59.000Z

    One of the most energy intensive industries in the U.S. today is in the melting and casting of steel alloys for use in our advanced technological society. While the majority of steel castings involve low or mild carbon steel for common construction materials, highly-alloyed steels constitute a critical component of many industries due to their excellent properties. However, as the amount of alloying additions increases, the problems associated with casting these materials also increases, resulting in a large waste of energy due to inefficiency and a lack of basic information concerning these often complicated alloy systems. Superaustenitic stainless steels constitute a group of Fe-based alloys that are compositionally balanced to have a purely austenitic matrix and exhibit favorable pitting and crevice corrosion resistant properties and mechanical strength. However, intermetallic precipitates such as sigma (√?¬?√?¬Į√?¬?√?¬Ā√?¬?√?¬≥) and Laves can form during casting or exposure to high-temperature processing, which degrade the corrosion and mechanical properties of the material. Knowledge of the times and temperatures at which these detrimental phases form is imperative if a company is to efficiently produce castings of high quality in the minimum amount of time, using the lowest amount of energy possible, while producing the least amount of material waste. Anecdotal evidence from company representatives revealed that large castings frequently had to be scrapped due to either lower than expected corrosion resistance or extremely low fracture toughness. It was suspected that these poor corrosion and / or mechanical properties were directly related to the type, amount, and location of various intermetallic phases that formed during either the cooling cycle of the castings or subsequent heat treatments. However, no reliable data existed concerning either the time-temperature-transformation (TTT) diagrams or the continuous-cooling-transformation (CCT) diagrams of the super-austenitics. The goal of this study was to accurately characterize the solid-solid phase transformations seen in cast superaustenitic stainless steels. Heat treatments were performed to understand the time and temperature ranges for intermetallic phase formations in alloys CN3MN and CK3McuN. Microstructures were characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy and wavelength dispersive spectroscopy (EDS, WDS). In this way TTT and CCT diagrams could be developed for the matrix of samples chosen. As this study consisted of basic research into the development of TTT and CCT diagrams as an aid to the US steel casting industry, there is no formal commercialization plan associated with this task other than presentations and publications via the Steel Founders Society of America to their members. The author is confident that the data contained in this report can be used by steel foundries to refine their casting procedures in such a way as to reduce the amount of waste produced and energy wasted by significantly reducing or eliminating the need for remelting or recasting of material due to unwanted, premature intermetallic formation. This development of high alloy steel CCT diagrams was predicted to result in an average energy savings of 0.05 trillion BTU√?¬?√?¬Ę√?¬?√?¬?√?¬?√?¬?s/year over a 10 year period (with full funding). With 65% of the proposed funding, current (2011) annual energy saving estimates, based on initial dissemination to the casting industry in 2011and market penetration of 97% by 2020, is 0.14 trillion BTU√?¬?√?¬Ę√?¬?√?¬?√?¬?√?¬?s/year. The reduction of scrap and improvement in casting yield will also result in a reduction of environmental emissions associated with the melting and pouring of the steel. The average annual estimate of CO2 reduction per year through 2020 is 0.003 Million Metri

  13. Fuel Savings and Emission Reductions from Next-Generation Mobile Air Conditioning Technology in India

    SciTech Connect (OSTI)

    Chaney, L.; Thundiyil, K.; Andersen, S.; Chidambaram, S.; Abbi, Y. P.

    2007-01-01T23:59:59.000Z

    Up to 19.4% of vehicle fuel consumption in India is devoted to air conditioning (A/C). Indian A/C fuel consumption is almost four times the fuel penalty in the United States and close to six times that in the European Union because India's temperature and humidity are higher and because road congestion forces vehicles to operate inefficiently. Car A/C efficiency in India is an issue worthy of national attention considering the rate of increase of A/C penetration into the new car market, India's hot climatic conditions and high fuel costs. Car A/C systems originally posed an ozone layer depletion concern. Now that industrialized and many developing countries have moved away from ozone-depleting substances per Montreal Protocol obligations, car A/C impact on climate has captured the attention of policy makers and corporate leaders. Car A/C systems have a climate impact from potent global warming potential gas emissions and from fuel used to power the car A/Cs. This paper focuses on car A/C fuel consumption in the context of the rapidly expanding Indian car market and how new technological improvements can result in significant fuel savings and consequently, emission reductions. A 19.4% fuel penalty is associated with A/C use in the typical Indian passenger car. Car A/C fuel use and associated tailpipe emissions are strong functions of vehicle design, vehicle use, and climate conditions. Several techniques: reducing thermal load, improving vehicle design, improving occupants thermal comfort design, improving equipment, educating consumers on impacts of driver behaviour on MAC fuel use, and others - can lead to reduced A/C fuel consumption.

  14. Emerging Energy-efficiency and CO2 Emission-reduction Technologies for Cement and Concrete Production

    E-Print Network [OSTI]

    Hasanbeigi, Ali

    2013-01-01T23:59:59.000Z

    technology would be more economical in new plants because retrofits would involve removal of existing

  15. Agriculture Taxes in Texas

    E-Print Network [OSTI]

    Jones, Lonnie L.; Stallmann, Judith I.

    2002-02-18T23:59:59.000Z

    farmers, ranchers and agribusiness firms, including: a73 Exemption from state and local sales and use taxes on purchased farm inputs and products. a73 The provision for local property tax pro- ductivity valuation for open space land. a73 Exemption from... and local level and the provision for open space productivity valuation of land used in agriculture, timber or wildlife production. Sales tax exemptions Farmers and ranchers are exempt from state and local sales taxes for several items, including most...

  16. Review of technical literature and trends related to automobile mass-reduction technology

    E-Print Network [OSTI]

    Lutsey, Nicholas P.

    2010-01-01T23:59:59.000Z

    projects have found a variety of different mass-reduction vehicle designs across different light-duty vehicle classes (sportscars, sedans,

  17. Memo for GlobalReductions Study School of Informatics and Computing, Pervasive Technology Institute

    E-Print Network [OSTI]

    , or scan are important building block for many data parallel applications such as Kmeans. The performance of the processing process. This paper studies the performance effect of global reductions primitives on Kmeans uses different parallel runtime tools including Hadoop, MPI, OpenMP, and Cuda. Keyword: GlobalReduction, Kmeans I

  18. Clean Coal Technology: Reduction of NO{sub x} and SO{sub 2} using gas reburning, sorbent injection, and integrated technologies. Topical report No. 3, Revision 1

    SciTech Connect (OSTI)

    Not Available

    1993-09-01T23:59:59.000Z

    The Clean Coal Technology Demonstration Program (also referred to as the CCT Program), is a unique government/industry cost-shared effort to develop these advanced coal-based technologies. The CCT Program provides numerous options for addressing a wide range of energy and environmental issues, including acid rain, global climate change, improved energy efficiency, energy security, and environmental qualitiy. It is intended to demonstrate a new generation of full-scale, ``showcase`` facilities built through the United States. Gas Reburning, Sorbent Injection and Integrated Technologies -- the subject of this Topical Report -- are one such set of promising innovative developments. In addition to discussing the technologies involved, this report will describe two specific projects, results to date, and the commercial promise of these processes. The objectives of Gas Reburning and Sorbent Injection were to have a 60% reduction in NO{sub x} emissions and a 50% reduction in SO{sub 2} emissions. These objectives have been achieved at the tangentially-fired boiler at the Hennepin site of Illinois Power and at the cyclone-fired boiler operated by City Water, Light and Power in Springfield, Illinois. The other project, Gas Reburning and Low NO{sub x} Burners had the goal of a 70% NO{sub x} reduction from the wall-fired boiler operated by Public Service of Colorado at Denver. In early preliminary testing, this goal was also achieved. Energy and Environmental Research (EER) is now ready to design and install Gas Rebunting and Sorbent Injection systems, and Gas Reburning-Low NO{sub x}, Burner systems for any utility or industrial application. These technologies are offered with performance and emission control guarantees.

  19. Emerging Energy-efficiency and CO2 Emission-reduction Technologies for Cement and Concrete Production

    E-Print Network [OSTI]

    Hasanbeigi, Ali

    2013-01-01T23:59:59.000Z

    24 3.5. Emerging Carbon Capture Technologies for the Cement27 3.5.2. Post-combustion Carbon Capture Using AbsorptionGmbH (ECRA), 2007. Carbon Capture Technology - Options and

  20. Fuel Savings and Emission Reductions from Next-Generation Mobile Air Conditioning Technology in India: Preprint

    SciTech Connect (OSTI)

    Chaney, L.; Thundiyil, K.; Chidambaram, S.; Abbi, Y. P.; Anderson, S.

    2007-05-01T23:59:59.000Z

    This paper quantifies the mobile air-conditioning fuel consumption of the typical Indian vehicle, exploring potential fuel savings and emissions reductions these systems for the next generation of vehicles.

  1. Emerging Energy-efficiency and CO{sub 2} Emission-reduction Technologies for Cement and Concrete Production

    SciTech Connect (OSTI)

    Hasanbeigi, Ali; Price, Lynn; Lin, Elina

    2012-04-06T23:59:59.000Z

    Globally, the cement industry accounts for approximately 5 percent of current anthropogenic carbon dioxide (CO{sub 2}) emissions. World cement demand and production are increasing significantly, leading to an increase in this industry's absolute energy use and CO{sub 2} emissions. Development of new energy-efficiency and CO{sub 2} emission-reduction technologies and their deployment in the market will be key for the cement industry's mid- and long-term climate change mitigation strategies. This report is an initial effort to compile available information on process description, energy savings, environmental and other benefits, costs, commercialization status, and references for emerging technologies to reduce the cement industry's energy use and CO{sub 2} emissions. Although studies from around the world identify a variety of sector-specific and cross-cutting energy-efficiency technologies for the cement industry that have already been commercialized, information is scarce and/or scattered regarding emerging or advanced energy-efficiency and low-carbon technologies that are not yet commercialized. This report consolidates available information on nineteen emerging technologies for the cement industry, with the goal of providing engineers, researchers, investors, cement companies, policy makers, and other interested parties with easy access to a well-structured database of information on these technologies.

  2. Texas Taxes...A Fact Book

    E-Print Network [OSTI]

    Jones, Lonnie L.; Stallmann, Judith I.; Tanyeri-Abur, Aysen

    1998-04-23T23:59:59.000Z

    ............................................................9 Property Tax ......................................................................................................................10 Alcohol and Tobacco Taxes....................................................................................12.... The most important tax for schools, counties, municipalities, and special taxing entities is the property tax. In 1995, local property taxes were the largest single tax paid by Texans, amounting to almost $16 billion. Texas had a state level property tax...

  3. Federal Fuels Taxes and Tax Credits (released in AEO2009)

    Reports and Publications (EIA)

    2009-01-01T23:59:59.000Z

    Provides a review and update of the handling of federal fuels taxes and tax credits, focusing primarily on areas for which regulations have changed or the handling of taxes or credits has been updated in Annual Energy Outlook 2009.

  4. Vehicle Technologies Office Merit Review 2014: Electric Drive Vehicle Climate Control Load Reduction

    Broader source: Energy.gov [DOE]

    Presentation given by National Renewable Energy Laboratory at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about electric...

  5. Vehicle Technologies Office Merit Review 2015: Electric Drive Vehicle Climate Control Load Reduction

    Broader source: Energy.gov [DOE]

    Presentation given by National Renewable Energy Laboratory at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about electric...

  6. Emerging Energy-efficiency and CO2 Emission-reduction Technologies for Cement and Concrete Production

    E-Print Network [OSTI]

    Hasanbeigi, Ali

    2013-01-01T23:59:59.000Z

    International Energy Agency (IEA). 2007. Tracking IndustrialInternational Energy Agency (IEA). 2009a. Cement TechnologyInternational Energy Agency (IEA). 2009b. Cement roadmap

  7. Emerging Energy-efficiency and CO2 Emission-reduction Technologies for Cement and Concrete Production

    E-Print Network [OSTI]

    Hasanbeigi, Ali

    2013-01-01T23:59:59.000Z

    2010. Cement and concrete nanoscience and nanotechnology.of 100 Percent Fly Ash Concrete. 2005 World of Coal Ash (carbon dioxide in precast concrete. TECHNOLOGY REVIEW Ė A

  8. Emerging Energy-efficiency and CO2 Emission-reduction Technologies for Cement and Concrete Production

    E-Print Network [OSTI]

    Hasanbeigi, Ali

    2013-01-01T23:59:59.000Z

    and/or used in enhanced oil recovery. This technology can beCO 2 for underground storage, enhanced oil recovery or other

  9. Vehicle Technologies Office Merit Review 2015: Enhanced High and Low Temperature Performance of NOx Reduction Materials

    Broader source: Energy.gov [DOE]

    Presentation given by Pacific Northwest National Laboratory at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about...

  10. Review of technical literature and trends related to automobile mass-reduction technology

    E-Print Network [OSTI]

    Lutsey, Nicholas P.

    2010-01-01T23:59:59.000Z

    Institute of Technology. M.S. Thesis. BMW, 2008. ďBMW 7 Series. Ē Press release.cars/2009/top-2009-BMW-7-Series.htm. Accessed April 9, 2010.

  11. DOE examines taxing issue in new report

    SciTech Connect (OSTI)

    Kaplan, D.

    1994-01-13T23:59:59.000Z

    Contrary to conventional wisdom, the federal tax code generally serves as an incentive for renewable energy production, not a barrier, the Department of Energy concluded in a report released Monday. Largely because depreciation schedules are shorter for renewable projects than for conventional plants - about five years compared to 20 - federal taxes and credits are a boon for the renewable projects of both investor-owned utilities (IOUs) and non-utility generators (NUGs). But a renewable energy leader dubbed the report [open quotes]idiotic[close quotes] for not examining the full fuel cycle. Such an examination would show that federal policy actually favored fossil fuels over renewables. Nonetheless, in what it termed a [open quotes]surprising[close quotes] finding, DOE said only federal income taxes on hydro and waste biomass IOU projects acted as barriers to renewable energy development. All seven renewables examines in the report benefitted from federal tax treatment of NUGs. However, when all local, state and federal taxes were included for IOUs, the report said five of the seven renewables faced barriers greater than conventional technologies. For NUGs though, renewables still have an advantage when all taxes are considered.

  12. Alternative SO sub 2 and NO sub x emission reduction technologies for stationary sources: A comparative analysis

    SciTech Connect (OSTI)

    Emmel, T.E. (Radian Corp., Austin, TX (USA)); South, D.W. (Argonne National Lab., IL (USA))

    1990-01-01T23:59:59.000Z

    Emission control of acid rain precursors is currently the subject of intense debate on Capitol Hill. Numerous bills have been introduced which call for substantial reduction in sulfur dioxide (SO{sub 2}) and nitrogen oxide (NO{sub x}) emissions from operating utility and industrial boilers. The primary focus of the debates is on the cost, applicability and potential market impacts of emissions control options available to achieve the desired reductions. These topics are also the focus of a report in preparation for the 1990 Assessment of the National Acid Precipitation Assessment Program (NAPAP). This paper summarizes some of the abatement technology information for utility boilers contained in the NAPAP report. First the major provisions in the proposed acid rain legislation are summarized and the emission reduction options potentially applicable to the utility boiler population discussed. This is followed by discussion of the retrofit issues for utility boilers and a synopsis of the applicability and cost of retrofit emission control options. Since the focus of the current proposed legislation is on near-term reduction requirements for utility boilers, this paper emphasizes retrofit control options. 1 ref., 12 figs., 3 tabs.

  13. Coal Mining Tax Credit (Arkansas)

    Broader source: Energy.gov [DOE]

    The Coal Mining Tax Credit provides an income or insurance premium tax credit of $2.00 per ton of coal mined, produced or extracted on each ton of coal mined in Arkansas in a tax year. An...

  14. Brownfield Development Tax Abatements (Alabama)

    Broader source: Energy.gov [DOE]

    The Brownfield Development Tax Abatements gives cities and counties the ability to abate, non-educational city and county sales and use taxes, non-educational state, city and county property taxes ...

  15. Sustainable Building Tax Credit (Personal)

    Broader source: Energy.gov [DOE]

    SB 463, enacted in April 2007, established a personal tax credit and a corporate tax credit for sustainable buildings in New Mexico. The tax credits apply to both commercial and residential...

  16. Exploration Incentive Tax Credit (Montana)

    Broader source: Energy.gov [DOE]

    The Mineral and Coal Exploration Incentive Tax Credit provides tax incentives to entities conducting exploration for minerals and coal. Expenditures related to the following activities are eligible...

  17. Gas Production Tax (Texas)

    Broader source: Energy.gov [DOE]

    A tax of 7.5 percent of the market value of natural gas produced in the state of Texas is imposed on every producer of gas.

  18. Demonstration of improved vehicle fuel efficiency through innovative tire design, materials, and weight reduction technologies

    SciTech Connect (OSTI)

    Donley, Tim [Cooper Tire & Rubber Company Incorporated, Findlay, OH (United States)

    2014-12-31T23:59:59.000Z

    Cooper completed an investigation into new tire technology using a novel approach to develop and demonstrate a new class of fuel efficient tires using innovative materials technology and tire design concepts. The objective of this work was to develop a new class of fuel efficient tires, focused on the ďreplacement marketĒ that would improve overall passenger vehicle fuel efficiency by 3% while lowering the overall tire weight by 20%. A further goal of this project was to accomplish the objectives while maintaining the traction and wear performance of the control tire. This program was designed to build on what has already been accomplished in the tire industry for rolling resistance based on the knowledge and general principles developed over the past decades. Cooperís CS4 (Figure #1) premium broadline tire was chosen as the control tire for this program. For Cooper to achieve the goals of this project, the development of multiple technologies was necessary. Six technologies were chosen that are not currently being used in the tire industry at any significant level, but that showed excellent prospects in preliminary research. This development was divided into two phases. Phase I investigated six different technologies as individual components. Phase II then took a holistic approach by combining all the technologies that showed positive results during phase one development.

  19. RISK REDUCTION THROUGH USE OF EXTERNAL TECHNICAL REVIEWS, TECHNOLOGY READINESS ASSESSMENTS AND TECHNICAL RISK RATINGS - 9174

    SciTech Connect (OSTI)

    Cercy, M; Steven P Schneider, S; Kurt D Gerdes, K

    2008-12-12T23:59:59.000Z

    The U.S. Department of Energy's Office of Environmental Management (DOE-EM) was established to achieve the safe and compliant disposition of legacy wastes and facilities from defense nuclear applications. A large majority of these wastes and facilities are 'one-of-a-kind' and unique to DOE. Many of the programs to treat these wastes have been 'first-of-a-kind' and unprecedented in scope and complexity. This has meant that many of the technologies needed to successfully disposition these wastes were not yet developed or required significant re-engineering to be adapted for DOE-EM's needs. The DOE-EM program believes strongly in reducing the technical risk of its projects and has initiated several efforts to reduce those risks: (1) Technology Readiness Assessments to reduce the risks of deployment of new technologies; (2) External Technical Reviews as one of several steps to ensure the timely resolution of engineering and technology issues; and (3) Technical Risk Ratings as a means to monitor and communicate information about technical risks. This paper will present examples of how Technology Readiness Assessments, External Technical Reviews, and Technical Risk Ratings are being used by DOE-EM to reduce technical risks.

  20. RISK REDUCTION THROUGH USE OF EXTERNAL TECHNICAL REVIEWS, TECHNOLOGY READINESS ASSESSMENTS AND TECHNICAL RISK RATINGS - 9174

    SciTech Connect (OSTI)

    Cercy, M; Steven P Schneider, S; Kurt D Gerdes, K

    2009-01-15T23:59:59.000Z

    The U.S. Department of Energy's Office of Environmental Management (DOE-EM) was established to achieve the safe and compliant disposition of legacy wastes and facilities from defense nuclear applications. A large majority of these wastes and facilities are 'one-of-a-kind' and unique to DOE. Many of the programs to treat these wastes have been 'first-of-a-kind' and unprecedented in scope and complexity. This has meant that many of the technologies needed to successfully disposition these wastes were not yet developed or required significant re-engineering to be adapted for DOE-EM's needs. The DOE-EM program believes strongly in reducing the technical risk of its projects and has initiated several efforts to reduce those risks: (1) Technology Readiness Assessments to reduce the risks of deployment of new technologies; (2) External Technical Reviews as one of several steps to ensure the timely resolution of engineering and technology issues; and (3) Technical Risk Ratings as a means to monitor and communicate information about technical risks. This paper will present examples of how Technology Readiness Assessments, External Technical Reviews, and Technical Risk Ratings are being used by DOE-EM to reduce technical risks.

  1. Buildings Energy Data Book: 7.2 Federal Tax Incentives

    Buildings Energy Data Book [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center HomeIdle Reduction WeightRebate -5 20054 Share of6351 Tax3 Tax4 Tax

  2. Buildings Energy Data Book: 7.2 Federal Tax Incentives

    Buildings Energy Data Book [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center HomeIdle Reduction WeightRebate -5 20054 Share of6351 Tax3 Tax4 Tax5

  3. New technology for sulfide reduction and increased oil recovery. Second quarter progress report

    SciTech Connect (OSTI)

    NONE

    1998-12-20T23:59:59.000Z

    The purpose of this project is to demonstrate reduction of sulfide contamination, as well as possible improvement of production in oil and gas production systems. This will be accomplished by application of the BioCompetitive Exclusion (BCX) process developed by GMT. A broad spectrum of well types and geographical locations is anticipated. The BCX process is designed to manipulate indigenous reservoir bacteria with the addition of synergistic inorganic chemical formulae. These treatments will stimulate growth of beneficial microbes, while suppressing metabolic activity of sulfate reducing bacteria (SRB), the primary source of harmful sulfide production. Progress in 7 oil and gas fields is summarized.

  4. Combined SO{sub 2}/NO{sub x} reduction technology

    SciTech Connect (OSTI)

    Livengood, C.D.; Huang, H.S. [Argonne National Lab., IL (United States); Markussen, J.M. [USDOE Pittsburgh Energy Technology Center, PA (United States)

    1992-09-01T23:59:59.000Z

    Enactment of the Clean Air Act Amendments and passage of state legislation leading to more stringent nitrogen oxides (NO{sub x}) regulations have fueled research and development efforts on technologies for the combined control of sulfur dioxide (SO{sub 2}) and NO{sub x}. The integrated removal of both SO{sub 2} and NO{sub x}, in a single system can offer significant advantages over the use of several separate processes, including such factors as reduced system complexity, better operability, and lower costs. This paper reviews the status of a number of integrated flue-gas-cleanup (FGC) systems that have reached a significant stage of development, focusing on post-combustion processes that have been tested or are ready for testing at the pilot scale or larger. A brief process description, a summary of the development status and performance achieved to date, pending commercialization issues, and process economics (when available) are given for each technology.

  5. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Photovoltaics Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Air-Quality Improvement Tax Incentives The Ohio Air Quality Development Authority (OAQDA) provides...

  6. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Photovoltaics Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Advanced Energy Tax Credit (Corporate) As of July 2007, the development and construction costs of...

  7. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Air Pollution Control Facility, Tax Exemption (Michigan) An application for a pollution control tax exemption certificate shall be filed with the state tax commission in a manner...

  8. The Job Creation Tax Credit Program (Ohio)

    Broader source: Energy.gov [DOE]

    The Ohio Job Creation Tax Credit Servicing site provides assistance to businesses that have previously been approved for a tax credit by the Ohio Tax Credit Authority (Authority).

  9. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Transportation Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Angel Investment Credit (New Mexico) A taxpayer who files a New Mexico income tax return and who is...

  10. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fuel Distributor Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Air Pollution Control Facility, Tax Exemption (Michigan) An application for a pollution control...

  11. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    BrownfieldGrayfield Tax Credit Program (Iowa) The BrownfieldGrayfield Tax Credit Program offers qualifying projects tax credits of 24% for qualifying costs of a Brownfield...

  12. A Review of Emerging Energy-efficiency and CO2 Emission-reduction Technologies for Cement and Concrete Production

    E-Print Network [OSTI]

    Hasanbeigi, Ali

    2014-01-01T23:59:59.000Z

    301Ė314. New Energy and Industrial Technology Development (Group Environmental Energy Technologies Division Lawrenceproceedings, Industrial Energy Technology Conference (IETC)

  13. New technology for sulfide reduction and increased oil recovery. Second quarter progress report, September 7, 1997--December 8, 1997

    SciTech Connect (OSTI)

    NONE

    1998-12-20T23:59:59.000Z

    Project work was initiated by Geo-Microbial Technologies, Inc. (GMT), Ochelata, Oklahoma for Contract Number DE-FG01-97EE15659 on June 18, 1997. The purpose of this project is to demonstrate reduction of sulfide contamination, as well as possible improvement of production in oil and gas production systems. This will be accomplished by application of the BioCompetitive Exclusion (BCX) process developed by GMT. A broad spectrum of well types and geographical locations is anticipated. The BCX process is designed to manipulate indigenous reservoir bacteria with the addition of synergistic inorganic chemical formulae. These treatments will stimulate growth of beneficial microbes, while suppressing metabolic activity of sulfate reducing bacteria (SRB), the primary source of harmful sulfide production.

  14. Energy Saving Melting and Revert Reduction Technology (E-SMARRT): Melting Efficiency Improvement

    SciTech Connect (OSTI)

    Principal Investigator Kent Peaslee; Co-PI√ƒ ¬ƒ √‚ ¬Ę√ƒ ¬‚ √‚ ¬€ √ƒ ¬‚ √‚ ¬™ s: Von Richards, Jeffrey Smith

    2012-07-31T23:59:59.000Z

    Steel foundries melt recycled scrap in electric furnaces and typically consume 35-100% excess energy from the theoretical energy requirement required to pour metal castings. This excess melting energy is multiplied by yield losses during casting and finishing operations resulting in the embodied energy in a cast product typically being three to six times the theoretical energy requirement. The purpose of this research project was to study steel foundry melting operations to understand energy use and requirements for casting operations, define variations in energy consumption, determine technologies and practices that are successful in reducing melting energy and develop new melting techniques and tools to improve the energy efficiency of melting in steel foundry operations.

  15. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Advanced Energy Gross Receipts Tax Deduction New Mexico has a gross receipts tax structure for businesses instead of a sales tax. Businesses are taxed on the gross amount of their...

  16. Emerging Energy-efficiency and Carbon Dioxide Emissions-reduction Technologies for the Iron and Steel Industry

    E-Print Network [OSTI]

    Hasanbeigi, Ali

    2014-01-01T23:59:59.000Z

    sulfur dioxide smelting reduction smelting reduction iron three-dimensional tonne top-gas recycling blast furnace tonnes per day ultra-low-

  17. Energy Saving Melting and Revert Reduction Technology: Aging of Graphitic Cast Irons and Machinability

    SciTech Connect (OSTI)

    Von L. Richards

    2012-09-19T23:59:59.000Z

    The objective of this task was to determine whether ductile iron and compacted graphite iron exhibit age strengthening to a statistically significant extent. Further, this effort identified the mechanism by which gray iron age strengthens and the mechanism by which age-strengthening improves the machinability of gray cast iron. These results were then used to determine whether age strengthening improves the machinability of ductile iron and compacted graphite iron alloys in order to develop a predictive model of alloy factor effects on age strengthening. The results of this work will lead to reduced section sizes, and corresponding weight and energy savings. Improved machinability will reduce scrap and enhance casting marketability. Technical Conclusions: √?¬?√?¬Ę√?¬?√?¬?√?¬?√?¬Ę Age strengthening was demonstrated to occur in gray iron ductile iron and compacted graphite iron. √?¬?√?¬Ę√?¬?√?¬?√?¬?√?¬Ę Machinability was demonstrated to be improved by age strengthening when free ferrite was present in the microstructure, but not in a fully pearlitic microstructure. √?¬?√?¬Ę√?¬?√?¬?√?¬?√?¬Ę Age strengthening only occurs when there is residual nitrogen in solid solution in the Ferrite, whether the ferrite is free ferrite or the ferrite lamellae within pearlite. √?¬?√?¬Ę√?¬?√?¬?√?¬?√?¬Ę Age strengthening can be accelerated by Mn at about 0.5% in excess of the Mn/S balance Estimated energy savings over ten years is 13.05 trillion BTU, based primarily on yield improvement and size reduction of castings for equivalent service. Also it is estimated that the heavy truck end use of lighter castings for equivalent service requirement will result in a diesel fuel energy savings of 131 trillion BTU over ten years.

  18. Investment Tax Credit

    Broader source: Energy.gov [DOE]

    Vermont offers an investment tax credit for installations of renewable energy equipment on business properties. The credit is equal to 24% of the "Vermont-property portion" of the federal business...

  19. Solar Property Tax Exemption

    Broader source: Energy.gov [DOE]

    In Missouri, solar energy systems not held for resale are exempt from state, local, and county property taxes. As enacted in July 2013, the law does not define solar energy systems.

  20. Agriculture Taxes in Texas†

    E-Print Network [OSTI]

    Jones, Lonnie L.; Stallmann, Judith I.

    2002-02-18T23:59:59.000Z

    This publication explains the tax exemptions and special provisions available to Texas farmers, ranchers and agribusiness managers and the effect of those exemptions on state and local governmental revenues....

  1. Carbon emissions reduction potential in the US chemicals and pulp and paper industries by applying CHP technologies

    SciTech Connect (OSTI)

    Khrushch, M.; Worrell, E.; Price, L.; Martin, N.; Einstein, D.

    1999-07-01T23:59:59.000Z

    The chemical and the pulp/paper industries combined provide 55% of CHP generation in the US industry. Yet, significant potential for new CHP capacities exists in both industries. From the present steam consumption data, the authors estimate about 50 GW of additional technical potential for CHP in both industries. The reduced carbon emissions will be equivalent to 44% of the present carbon emissions in these industries. They find that most of the carbon emissions reductions can be achieved at negative costs. Depending on the assumptions used in calculations, the economic potential of CHP in these industries can be significantly lower, and carbon emissions mitigation costs can be much higher. Using sensitivity analyses, they determine that the largest effect on the CHP estimate have the assumptions in the costs of CHP technology, in the assumed discount rates, in improvements in efficiency of CHP technologies, and in the CHP equipment depreciation periods. Changes in fuel and electricity prices and the growth in the industries' steam demand have less of an effect. They conclude that the lowest carbon mitigation costs are achieved with the CHP facility is operated by the utility and when industrial company that owns the CHP unit can sell extra electricity and steam to the open wholesale market. Based on the results of the analyses they discuss policy implications.

  2. Agricultural Industry Advanced Vehicle Technology: Benchmark Study for Reduction in Petroleum Use

    SciTech Connect (OSTI)

    Roger Hoy

    2014-09-01T23:59:59.000Z

    Diesel use on farms in the United States has remained relatively constant since 1985, decreasing slightly in 2009, which may be attributed to price increases and the economic recession. During this time, the United Statesí harvested area also has remained relatively constant at roughly 300 million acres. In 2010, farm diesel use was 5.4% of the total United States diesel use. Crops accounting for an estimated 65% of United States farm diesel use include corn, soybean, wheat, hay, and alfalfa, respectively, based on harvested crop area and a recent analysis of estimated fuel use by crop. Diesel use in these cropping systems primarily is from tillage, harvest, and various other operations (e.g., planting and spraying) (Figure 3). Diesel efficiency is markedly variable due to machinery types, conditions of operation (e.g., soil type and moisture), and operator variability. Farm diesel use per acre has slightly decreased in the last two decades and diesel is now estimated to be less than 5% of farm costs per acre. This report will explore current trends in increasing diesel efficiency in the farm sector. The report combines a survey of industry representatives, a review of literature, and data analysis to identify nascent technologies for increasing diesel efficiency

  3. Energy Saving Melting and Revert Reduction Technology (E-SMARRT): Mechanical Performance of Dies

    SciTech Connect (OSTI)

    R. Allen Miller, Principal Investigator; Contributors: Khalil Kabiri-Bamoradian; Abelardo Delgado-Garza; Karthik Murugesan; Adham Ragab

    2011-09-13T23:59:59.000Z

    As a net shape process, die casting is intrinsically efficient and improvements in energy efficiency are strongly dependent on design and process improvements that reduce scrap rates so that more of the total consumed energy goes into acceptable, usable castings. A casting that is distorted and fails to meet specified dimensional requirements is typically remelted but this still results in a decrease in process yield, lost productivity, and increased energy consumption. This work focuses on developing, and expanding the use of, computer modeling methods that can be used to improve the dimensional accuracy of die castings and produce die designs and machine/die setups that reduce rejection rates due to dimensional issues. A major factor contributing to the dimensional inaccuracy of the casting is the elastic deformations of the die cavity caused by the thermo mechanical loads the dies are subjected to during normal operation. Although thermal and die cavity filling simulation are widely used in the industry, structural modeling of the die, particularly for managing part distortion, is not yet widely practiced. This may be due in part to the need to have a thorough understanding of the physical phenomenon involved in die distortion and the mathematical theory employed in the numerical models to efficiently model the die distortion phenomenon. Therefore, two of the goals of this work are to assist in efforts to expand the use of structural modeling and related technologies in the die casting industry by 1) providing a detailed modeling guideline and tutorial for those interested in developing the necessary skills and capability and 2) by developing simple meta√?¬Ę√?¬?√?¬źmodels that capture the results and experience gained from several years of die distortion research and can be used to predict key distortion phenomena of relevance to a die caster with a minimum of background and without the need for simulations. These objectives were met. A detailed modeling tutorial was provided to NADCA for distribution to the industry. Power law based meta√?¬Ę√?¬?√?¬źmodels for predicting machine tie bar loading and for predicting maximum parting surface separation were successfully developed and tested against simulation results for a wide range of machines and experimental data. The models proved to be remarkably accurate, certainly well within the requirements for practical application. In addition to making die structural modeling more accessible, the work advanced the state-of-the-art by developing improved modeling of cavity pressure effects, which is typically modeled as a hydrostatic boundary condition, and performing a systematic analysis of the influence of ejector die design variables on die deflection and parting plane separation. This cavity pressure modeling objective met with less than complete success due to the limits of current finite element based fluid√?¬Ę√?¬?√?¬źstructure√?¬Ę√?¬?√?¬źinteraction analysis methods, but an improved representation of the casting/die interface was accomplished using a combination of solid and shell elements in the finite element model. This approximation enabled good prediction of final part distortion verified with a comprehensive evaluation of the dimensions of test castings produced with a design experiment. An extra deliverable of the experimental work was development of high temperature mechanical properties for the A380 die casting alloy. The ejector side design objective was met and the results were incorporated into the metamodels described above. This new technology was predicted to result in an average energy savings of 2.03 trillion BTU√?¬Ę√?¬?√?¬?s/year over a 10 year period. Current (2011) annual energy saving estimates over a ten year period, based on commercial introduction in 2009, a market penetration of 70% by 2014 is 4.26 trillion BTU√?¬Ę√?¬?√?¬?s/year by 2019. Along with these en

  4. Energy Saving Melting and Revert Reduction Technology (Energy-SMARRT): Light Metals Permanent Mold Casting

    SciTech Connect (OSTI)

    Fasoyinu, Yemi [CanmetMATERIALS] [CanmetMATERIALS

    2014-03-31T23:59:59.000Z

    Current vehicles use mostly ferrous components for structural applications. It is possible to reduce the weight of the vehicle by substituting these parts with those made from light metals such as aluminum and magnesium. Many alloys and manufacturing processes can be used to produce these light metal components and casting is known to be most economical. One of the high integrity casting processes is permanent mold casting which is the focus of this research report. Many aluminum alloy castings used in automotive applications are produced by the sand casting process. Also, aluminum-silicon (Al-Si) alloys are the most widely used alloy systems for automotive applications. It is possible that by using high strength aluminum alloys based on an aluminum-copper (Al-Cu) system and permanent mold casting, the performance of these components can be enhanced significantly. This will also help to further reduce the weight. However, many technological obstacles need to be overcome before using these alloys in automotive applications in an economical way. There is very limited information in the open literature on gravity and low-pressure permanent mold casting of high strength aluminum alloys. This report summarizes the results and issues encountered during the casting trials of high strength aluminum alloy 206.0 (Al-Cu alloy) and moderate strength alloy 535.0 (Al-Mg alloy). Five engineering components were cast by gravity tilt-pour or low pressure permanent mold casting processes at CanmetMATERIALS (CMAT) and two production foundries. The results of the casting trials show that high integrity engineering components can be produced successfully from both alloys if specific processing parameters are used. It was shown that a combination of melt processing and mold temperature is necessary for the elimination of hot tears in both alloys.

  5. A Review of Emerging Energy-efficiency and CO2 Emission-reduction Technologies for Cement and Concrete Production

    E-Print Network [OSTI]

    Hasanbeigi, Ali

    2014-01-01T23:59:59.000Z

    GmbH (ECRA), 2007. Carbon Capture Technology - Options and2.5. Emerging Carbon Capture Technologies for the Cementof emerging carbon capture technologies for the cement

  6. Energy Saving Melting and Revert Reduction Technology: Innovative Semi-Solid Metal (SSM) Processing

    SciTech Connect (OSTI)

    Diran Apelian

    2012-08-15T23:59:59.000Z

    Semi-solid metal (SSM) processing has emerged as an attractive method for near-net-shape manufacturing due to the distinct advantages it holds over conventional near-net-shape forming technologies. These advantages include lower cycle time, increased die life, reduced porosity, reduced solidification shrinkage, improved mechanical properties, etc. SSM processing techniques can not only produce the complex dimensional details (e.g. thin-walled sections) associated with conventional high-pressure die castings, but also can produce high integrity castings currently attainable only with squeeze and low-pressure permanent mold casting processes. There are two primary semi-solid processing routes, (a) thixocasting and (b) rheocasting. In the thixocasting route, one starts from a non-dendritic solid precursor material that is specially prepared by a primary aluminum manufacturer, using continuous casting methods. Upon reheating this material into the mushy (a.k.a. "two-phase") zone, a thixotropic slurry is formed, which becomes the feed for the casting operation. In the rheocasting route (a.k.a. "slurry-on-demand" or "SoD"), one starts from the liquid state, and the thixotropic slurry is formed directly from the melt via careful thermal management of the system; the slurry is subsequently fed into the die cavity. Of these two routes, rheocasting is favored in that there is no premium added to the billet cost, and the scrap recycling issues are alleviated. The CRP (Trade Marked) is a process where the molten metal flows through a reactor prior to casting. The role of the reactor is to ensure that copious nucleation takes place and that the nuclei are well distributed throughout the system prior to entering the casting cavity. The CRP (Trade Marked) has been successfully applied in hyper-eutectic Al-Si alloys (i.e., 390 alloy) where two liquids of equal or different compositions and temperatures are mixed in the reactor and creating a SSM slurry. The process has been mostly used for hypo-eutectic Al-Si alloys (i.e., 356, 357, etc.) where a single melt passes through the reactor. In addition, the CRP (Trade Marked) was designed to be flexible for thixocasting or rheocasting applications as well as batch or continuous casting. Variable heat extraction rates can be obtained by controlling either the superheat of the melt, the temperature of the channel system, or the temperature of the reactor. This program had four main objectives all of which were focused on a mechanistic understanding of the process in order to be able to scale it up, to develop it into a robust process,and for SSM processing to be commercially used.

  7. Energy Saving Melting and Revert Reduction Technology: Improved Die Casting Process to Preserve the Life of the Inserts

    SciTech Connect (OSTI)

    David Schwam, PI; Xuejun Zhu, Sr. Research Associate

    2012-09-30T23:59:59.000Z

    The goal of this project was to study the combined effects of die design, proper internal cooling and efficient die lubricants on die life. The project targeted improvements in die casting insert life by: Optomized Die Design for Reduced Surface Temperature: The life of die casting dies is significantly shorter when the die is exposed to elevated temperature for significant periods of time. Any die operated under conditions leading to surface temperature in excess of 1050oF undergoes structural changes that reduce its strength. Optimized die design can improve die life significantly. This improvement can be accomplished by means of cooling lines, baffles and bubblers in the die. A key objective of the project was to establish criteria for the minimal distance of the cooling lines from the surface. This effort was supported with alloys and machining by BohlerUddeholm, Dunn Steel, HH Stark and Rex Buckeye. In plant testing and evaluation was conducted as in-kind cost share at St. Clair Die Casting. The Uddeholm Dievar steel evaluated in this program showed superior resistance to thermal fatigue resistance. Based on the experimental evidence, cooling lines could be placed as close as 0.5"¬Ě from the surface. Die Life Extension by Optimized Die Lubrication: The life of die casting dies is affected by additions made to its surface with the proper lubricants. These lubricants will protect the surface from the considerable temperature peaks that occur when the molten melt enters the die. Dies will reach a significantly higher temperature without this lubricant being applied. The amount and type of the lubricant are critical variables in the die casting process. However, these lubricants must not corrode the die surface. This effort was supported with alloys and machining by BohlerUddeholm, Dunn Steel, HH Stark and Rex Buckeye. In plant testing and evaluation was conducted as in-kind cost share at St. Clair Die Casting. Chem- Trend participated in the program with die lubricants and technical support. Experiments conducted with these lubricants demonstrated good protection of the substrate steel. Graphite and boron nitride used as benchmarks are capable of completely eliminating soldering and washout. However, because of cost and environmental considerations these materials are not widely used in industry. The best water-based die lubricants evaluated in this program were capable of providing similar protection from soldering and washout. In addition to improved part quality and higher production rates, improving die casting processes to preserve the life of the inserts will result in energy savings and a reduction in environmental wastes. Improving die life by means of optimized cooling line placement, baffles and bubblers in the die will allow for reduced die temperatures during processing, saving energy associated with production. The utilization of optimized die lubricants will also reduce heat requirements in addition to reducing waste associated with soldering and washout. This new technology was predicted to result in an average energy savings of 1.1 trillion BTU's/year over a 10 year period. Current (2012) annual energy saving estimates, based on commercial introduction in 2010, a market penetration of 70% by 2020 is 1.26 trillion BTU's/year. Along with these energy savings, reduction of scrap and improvement in casting yield will result in a reduction of the environmental emissions associated with the melting and pouring of the metal which will be saved as a result of this technology. The average annual estimate of CO2 reduction per year through 2020 is 0.025 Million Metric Tons of Carbon Equivalent (MM TCE).

  8. Energy Tax Savers' EPAct and Tax Incentives Presentation

    E-Print Network [OSTI]

    Pump Tax Credit/Grant for Business l Geothermal Heat Pump Tax Credit for Residential 2 #12;Energy Charles.Goulding@EnergyTaxSavers.com #12;Presentation Index l EPAct l Bonus Depreciation l Geothermal Heat. Building Envelope ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers) HVAC

  9. Focus Area Tax Credits (Maryland)

    Broader source: Energy.gov [DOE]

    Focus Area Tax Credits for businesses in Baltimore City or Prince Georgeís County enterprise zones include: (1) Ten-year, 80% credit against local real property taxes on a portion of real property...

  10. Sustainable Building Tax Credit (Corporate)

    Broader source: Energy.gov [DOE]

    Note: In April 2015, S.B. 279 was enacted, creating a new Sustainable Building Tax Credit for the years 2017-2026. As of January, 2015, no funds are available for the residential tax credit in 2015...

  11. Alternative Energy Manufacturing Tax Credit

    Broader source: Energy.gov [DOE]

    The Alternative Energy Development Incentive (AEDI) is a post-performance non-refundable tax credit for up to 100% of new state tax revenues (including, state, corporate, sales and withholding...

  12. Capital Investment Tax Credit (Florida)

    Broader source: Energy.gov [DOE]

    The Capital Investment Tax Credit is an annual credit, provided for up to twenty years, against the corporate income tax. Eligible projects are those in designated high-impact portions of the...

  13. Corporate Jobs Tax Credit (Louisiana)

    Broader source: Energy.gov [DOE]

    Corporate Jobs Tax Credit is a one-time tax credit ranging from up to $225 for each net new permanent job created as the result of a new business start-up or the expansion of an existing one. ...

  14. Residential Energy Efficiency Tax Credit

    Broader source: Energy.gov [DOE]

    '''''Note: This tax credit expired at the end of 2011. The American Taxpayer Relief Act of 2012 retroactively renewed this tax credit effective January 1, 2012, expiring again on December 31, 2013....

  15. Job Creation Tax Credit (Maryland)

    Broader source: Energy.gov [DOE]

    The Job Creation Tax Credit provides a $1000 tax credit to businesses that create new jobs; the credit is 2.5% of the aggregate annual wages for all newly created full-time positions. This credit...

  16. Nonrefundable Business Activity Tax Credit

    Broader source: Energy.gov [DOE]

    '''''Note: [http://www.legislature.mi.gov/documents/2011-2012/publicact/pdf/2011-PA-... Public Act 38] of 2011 repealed the Michigan Business Tax (MBT) and implemented the Corporate Income Tax (CIT...

  17. Scope for Future CO2 Emission Reductions from Electricity Generation through the Deployment of Carbon Capture and Storage Technologies

    E-Print Network [OSTI]

    Haszeldine, Stuart

    Scope for Future CO2 Emission Reductions from Electricity Generation through the Deployment, it is therefore possible that large (~45%) reductions in CO2 emissions from UK electricity generation couldC/year. If required, however, a reduction in CO2 emissions of 15 MtC/year in the electricity generation sector by 2020

  18. Financing end-use solar technologies in a restructured electricity industry: Comparing the cost of public policies

    SciTech Connect (OSTI)

    Jones, E.; Eto, J.

    1997-09-01T23:59:59.000Z

    Renewable energy technologies are capital intensive. Successful public policies for promoting renewable energy must address the significant resources needed to finance them. Public policies to support financing for renewable energy technologies must pay special attention to interactions with federal, state, and local taxes. These interactions are important because they can dramatically increase or decrease the effectiveness of a policy, and they determine the total cost of a policy to society as a whole. This report describes a comparative analysis of the cost of public policies to support financing for two end-use solar technologies: residential solar domestic hot water heating (SDHW) and residential rooftop photovoltaic (PV) systems. The analysis focuses on the cost of the technologies under five different ownership and financing scenarios. Four scenarios involve leasing the technologies to homeowners in return for a payment that is determined by the financing requirements of each form of ownership. For each scenario, the authors examine nine public policies that might be used to lower the cost of these technologies: investment tax credits (federal and state), production tax credits (federal and state), production incentives, low-interest loans, grants (taxable and two types of nontaxable), direct customer payments, property and sales tax reductions, and accelerated depreciation.

  19. Vehicle Technologies Office Merit Review 2015: High Temperature DC-Bus Capacitor Cost Reduction and Performance Improvements

    Broader source: Energy.gov [DOE]

    Presentation given by Sigma Technologies International at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about high...

  20. Vehicle Technologies Office Merit Review 2014: High Temperature DC-Bus Capacitors Cost Reduction and Performance Improvements

    Broader source: Energy.gov [DOE]

    Presentation given by Sigma Technologies International at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about high...

  1. Electric and Magnetic Fields (EMF) RAPID Program Engineering Project 8: FINAL REPORT, Evaluation of Field Reduction Technologies, Volume 1 (Report) and Volume 2 (Appendices)

    SciTech Connect (OSTI)

    Commonwealth Associates, Inc.; IIT Research Institute

    1997-08-01T23:59:59.000Z

    This draft report consists of two volumes. Volume 1, the main body, contains an introducto~ sectionj an overview of magnetic fields sectio~ and field reduction technology evaluation section. Magnetic field reduction methods are evalpated for transmission lines, distribution Iines,sulxtations, building wiring applkmd machinery, and transportation systems. The evaluation considers effectiveness, co% and other ftiors. Volume 2 contains five appendices, Append~ A presents magnetic field shielding information. Appendices B and C present design assumptions and magnetic field plots for transmission and distribution lines, respectively. Appendices D and E present cost estimate details for transmission and distribution limes, respectively.

  2. Innovative Clean Coal Technology (ICCT): Demonstration of innovative applications of technology for cost reductions to the CT-121 FGD process. Quarterly report No. 6, July--September 1991

    SciTech Connect (OSTI)

    Not Available

    1991-11-15T23:59:59.000Z

    The project`s objective is to demonstrate innovative applications of technology for cost reduction for the Chiyoda Thoroughbred-121 (CT-121) process. The CT-121 process is a wet FGD process that removes SO{sub 2}, can achieve simultaneous particulate control, and can produce a salable by-product gypsum thereby reducing or even eliminating solid waste disposal problems. Figure 1 shows a flow schematic of the process. CT-121 removes SO{sub 2} and particulate matter in a unique limestone-based scrubber called the Jet Bubbling Reactor (JBR). IN the JBR, flue gas bubbles beneath the slurry, SO{sub 2} is absorbed, and particulate matter is removed from the gas. The agitator circulates limestone slurry to ensure that fresh reactant is always available in the bubbling or froth zone sot that SO{sub 2} removal can proceed at a rapid rate. Air is introduced into the bottom of the JBR to oxidize the absorbed SO{sub 2} to sulfate, and limestone is added continuously to neutralize the acid slurry and form gypsum. The JBR is designed to allow ample time for complete oxidation of the SO{sub 2}, for complete reaction of the limestone, and for growth of large gypsum crystals. The gypsum slurry is continuously withdrawn from the JBR and is to be dewatered in a gypsum stack. The stacking technique involves filing a diked area with gypsum slurry, allowing the gypsum solids to settle, and removing clear liquid from the top of the stack for recycle back to the process.

  3. Tax Deduction Qualified Software

    Broader source: Energy.gov [DOE]

    On this page you'll find information about the EnergyGauge Summit version 3.20 (incorporating DOE-2.1E (v120)) qualified computer software (buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings.

  4. Tax Deduction Qualified Software

    Broader source: Energy.gov [DOE]

    On this page you'll find information about the EnergyGauge Summit version 3.22 (incorporating DOE-2.1E (v120)) qualified computer software (buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings.

  5. Tax Deduction Qualified Software

    Broader source: Energy.gov [DOE]

    On this page you'll find information about the EnergyGauge Summit version 3.21 (incorporating DOE-2.1E (v120)) qualified computer software (buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings.

  6. Buildings Energy Data Book: 7.2 Federal Tax Incentives

    Buildings Energy Data Book [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center HomeIdle Reduction WeightRebate -5 20054 Share of6351 Tax3 Tax

  7. Buildings Energy Data Book: 7.2 Federal Tax Incentives

    Buildings Energy Data Book [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center HomeIdle Reduction WeightRebate -5 20054 Share of6351 Tax3 Tax4

  8. Buildings Energy Data Book: 7.2 Federal Tax Incentives

    Buildings Energy Data Book [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center HomeIdle Reduction WeightRebate -5 20054 Share of6351 Tax3 Tax47

  9. Solar Energy Gross Receipts Tax Deduction

    Broader source: Energy.gov [DOE]

    New Mexico has a gross receipts tax structure for businesses instead of a sales tax. Businesses are taxed on the gross amount of their business receipts each year before expenses are deducted....

  10. Biomass Producer or Collector Tax Credit

    Broader source: Energy.gov [DOE]

    The credit can be transferred to another taxpayer, though the minimum discount value for the transfer of the credit is 90% of the value of the tax credit. †This tax credit is available for tax ye...

  11. Fixed Capital Investment Tax Credit (Connecticut)

    Broader source: Energy.gov [DOE]

    The Fixed Capital Investment Tax Credit allows a tax credit of 5% of the amount paid for any new fixed capital investment. Companies with fewer than 800 full-time employees may take a tax credit...

  12. Energy Efficient Residential Construction Tax Credit (Corporate)

    Broader source: Energy.gov [DOE]

    '''''Note: After a 2 year moratorium on all state tax credits, this credit may be claimed for tax year 2012 and subsequent tax years, for eligible expenditures on or after July 1, 2012.'''''

  13. Renewable Energy Production Tax Credit (Corporate)

    Broader source: Energy.gov [DOE]

    Enacted in 2002, the New Mexico Renewable Energy Production Tax Credit provides a tax credit against the corporate income tax of one cent per kilowatt-hour for companies that generate electricity...

  14. Renewable Energy Production Tax Credit (Personal)

    Broader source: Energy.gov [DOE]

    Enacted in 2002, the New Mexico Renewable Energy Production Tax Credit provides a tax credit against the personal income tax of one cent per kilowatt-hour for companies that generate electricity...

  15. Electrical Generation Tax Reform Act (Montana)

    Broader source: Energy.gov [DOE]

    This Act reforms taxes paid by electricity generators to reduce tax rates and imposes replacement taxes in response to the 1997 restructuring of the Montana electric utility industry that allows...

  16. Job Tax Credit and Super Credit (Tennessee)

    Broader source: Energy.gov [DOE]

    The Job Tax Credit Program is a tax credit program for companies investing at least $500,000 and creating 25 new jobs in a 12-month period. The company creating these jobs can claim a Job Tax...

  17. Renewable Energy Tax Incentive Program (Texas)

    Broader source: Energy.gov [DOE]

    The Renewable Energy Tax Incentive Program provides various tax exemptions to businesses that either use or manufacture or install solar or wind energy. They can receive franchise tax deductions...

  18. Keystone Innovation Zone Tax Credit Program (Pennsylvania)

    Broader source: Energy.gov [DOE]

    The Keystone Innovation Zone Tax Credit Program provides tax credits to companies less than eight years old who operate within designated innovation zones. A total pool of $25 million in tax...

  19. Biodiesel Production and Blending Tax Credit (Kentucky)

    Broader source: Energy.gov [DOE]

    blended biodiesel does not qualify. The biodiesel tax credit is applied against the corporation income tax imposed under KRS 141.040 and/or the limited liability entity tax (LLET) imposed under KRS...

  20. Emerging Energy-efficiency and Carbon Dioxide Emissions-reduction Technologies for the Iron and Steel Industry

    E-Print Network [OSTI]

    Hasanbeigi, Ali

    2014-01-01T23:59:59.000Z

    Emerging Technologies for Ironmaking Using Blast FurnaceAgglomerates 3.4. Alternative Ironmaking Technologies 3.4.1.Tecnored 3.4.4. ITmk3 Ironmaking Process 3.4.5. Paired

  1. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Construction Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings CPS Energy- Residential Energy Efficiency Rebate Program CPS Energy offers a variety of rebates for...

  2. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Construction Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Moratorium on Construction of Nuclear Power Facilities (Connecticut) No construction shall commence on...

  3. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Construction Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Belle Fourche River Compact (South Dakota) The Belle Fourche River Compact, agreed to by South Dakota...

  4. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Moratorium on Construction of Nuclear Power Facilities (Connecticut) No construction shall commence on a fifth...

  5. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Construction Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Accelerate Oklahoma (Oklahoma) Three new funds that each offer equity and growth investment capital...

  6. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Construction Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Alameda Municipal Power- Commercial New Construction Rebate Program Alameda Municipal Power (AMP)...

  7. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Construction Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings CPS Energy- New Commercial Construction Incentives CPS Energy offers incentives for new commercial...

  8. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings AEP Texas Central Company- SMART Source Solar PV Rebate Program American Electric Power Texas Central Company...

  9. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Photovoltaics Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Abatement of Air Pollution: Control of Carbon Dioxide EmissionsCarbon Dioxide Budget Trading Program...

  10. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Photovoltaics Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings AEP Ohio- Renewable Energy Credit (REC) Purchase Program '''''Note: This program is currently closed....

  11. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Retail Supplier, Rural Electric Cooperative, Utility Savings Category: Fuel Cells, Photovoltaics Economic Development Tax Credit Program (Wisconsin) The Economic Development Tax...

  12. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Photovoltaics Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Advanced Energy Fund Ohio's Advanced Energy Fund was originally authorized by the state's 1999...

  13. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solar Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings CPS Energy- Solar Hot Water Rebate Program As part of a larger program designed to reduce electricity demand...

  14. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Integrator, Fuel Distributor, Nonprofit, General PublicConsumer, Transportation Clean Coal Incentive Tax Credit (Kentucky) Clean Coal Incentive Tax Credit provides for a...

  15. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    MunicipalPublic Utility Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Carbon Sequestration Advisory Committee (Nebraska) Under this statute, the Director of...

  16. Economic Development Tax Credit Program (Wisconsin)

    Broader source: Energy.gov [DOE]

    The Economic Development Tax Credit (ETC) program was enacted in 2009 and eliminated five existing tax credit programs (Agricultural Development Zones, Airport Development Zones, Community...

  17. Renewable Energy Manufacturing Tax Credit (South Carolina)

    Broader source: Energy.gov [DOE]

    South Carolina offers a ten percent income tax credit to the manufacturers of renewable energy operations* for tax years 2010 through 2015.

  18. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Transportation Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Climate Action Plan (Massachusetts) In August 2008, Governor Deval Patrick signed into law the...

  19. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Transportation Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Climate Action Plan (Vermont) There is a growing scientific consensus that increasing emissions of...

  20. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Transportation Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Canadian River Compact (Texas) The Canadian River Commission administers the Canadian River Compact...

  1. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Transportation Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Moratorium on Construction of Nuclear Power Facilities (Connecticut) No construction shall commence...

  2. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Transportation Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Connecticut Water Diversion Policy Act (Connecticut) This section describes regulations and permit...

  3. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Transportation Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Accelerate Oklahoma (Oklahoma) Three new funds that each offer equity and growth investment capital...

  4. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Transportation Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Chesapeake Forest Lands (Maryland) The Chesapeake Forest Lands are most of the former land holdings...

  5. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    the Corporate Income Tax (CIT... Eligibility: Commercial, Industrial Savings Category: Fuel Cells, Fuel Cells using Renewable Fuels, Photovoltaics, Solar Water Heat Property Tax...

  6. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Rural Electric Cooperative Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Moratorium on Construction of Nuclear Power Facilities (Connecticut) No construction...

  7. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Abatement of Air Pollution: Control of Carbon Dioxide EmissionsCarbon Dioxide Budget Trading Program (Connecticut)...

  8. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fuel Cells Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Abatement of Air Pollution: Control of Carbon Dioxide EmissionsCarbon Dioxide Budget Trading Program...

  9. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    MunicipalPublic Utility Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Air Pollution Control (North Dakota) The Department of Health is the designated agency to...

  10. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Utility Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Abatement of Air Pollution: The Clean Air Interstate Rule (CAIR) Nitrogen Oxides (Nox) Ozone Season...

  11. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Government Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Abatement of Air Pollution: Control of Carbon Dioxide EmissionsCarbon Dioxide Budget Trading Program...

  12. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Abatement of Air Pollution: Control of Carbon Dioxide EmissionsCarbon Dioxide Budget Trading Program...

  13. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Schools Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Abatement of Air Pollution: Air Pollution Control Equipment and Monitoring Equipment Operation...

  14. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Govt Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Abatement of Air Pollution: The Clean Air Interstate Rule (CAIR) Nitrogen Oxides (Nox) Ozone Season...

  15. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Investor-Owned Utility Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Air Pollution Control Regulations: No. 5- Fugitive Dust (Rhode Island) These regulations aim...

  16. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Nonprofit Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Abatement of Air Pollution: Control of Carbon Dioxide EmissionsCarbon Dioxide Budget Trading Program...

  17. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    MunicipalPublic Utility Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Air Pollution Control Regulations: No. 46 and 47- CO2 Budget Trading Program and Allowance...

  18. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cooperative Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Abatement of Air Pollution: Control of Carbon Dioxide EmissionsCarbon Dioxide Budget Trading Program...

  19. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Commercial Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Abatement of Air Pollution: Control of Carbon Dioxide EmissionsCarbon Dioxide Budget Trading Program...

  20. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    StateProvincial Govt Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Air Pollution Control Program (Alabama) This rule states standards for emission inventory...

  1. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Investor-Owned Utility Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Air Pollution Control (Oklahoma) This chapter enumerates primary and secondary ambient air...

  2. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Systems Integrator Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Air Pollution Control Program (Alabama) This rule states standards for emission inventory...

  3. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Transportation Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Air Pollution Control Regulations: No. 1- Visible Emissions (Rhode Island) The regulations state...

  4. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings City of Bloomington- Sustainable Development Incentives The City of Bloomington offers fee waivers and other...

  5. New Market Tax Credit (Illinois)

    Broader source: Energy.gov [DOE]

    The Illinois New Markets Development Program provides supplemental funding for investment entities that have been approved for the Federal New Markets Tax Credit (NMTC) program. This program will...

  6. Renewable Energy Tax Credit (Corporate)

    Broader source: Energy.gov [DOE]

    Note: Senate Bill 372, signed in April 2015, provides a delayed sunset of the tax credit for projects that meet certain criteria. See below for more information.

  7. Commercial Solar Property Tax Exemption

    Broader source: Energy.gov [DOE]

    The tax exemption is generally for ďcertified pollution control equipment and facilitiesĒ which includes any property including real or personal property, equipment, facilities, or devices used t...

  8. Renewable Energy Tax Credit (Personal)

    Broader source: Energy.gov [DOE]

    Kentucky taxpayers may take the 30% credit against individual income taxes for any of the following equipment installed on their principal residence:

  9. Tax Morale and Conditional Cooperation

    E-Print Network [OSTI]

    Frey, Bruno S.; Torgler, Benno

    2006-01-01T23:59:59.000Z

    Latvia, Estonia, Slovakia, and Malta. Table 3 Tax Morale andSlovakia, Greece, and Malta. Standard errors are adjustedFrance Iceland Ireland Italy Malta Netherlands North Ireland

  10. Energy Efficiency Tax Credits (Personal)

    Broader source: Energy.gov [DOE]

    In April 2008, Kentucky enacted legislation allowing a 30% state income tax credit for taxpayers who install certain energy efficiency measures on their principal residence or residential rental...

  11. Vehicle Technologies Office Merit Review 2014: Friction Reduction through Surface Modification (Agreement ID:23284) Project ID:18518

    Broader source: Energy.gov [DOE]

    Presentation given by Oak Ridge National Laboratory at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about friction...

  12. Vehicle Technologies Office Merit Review 2015: Design and Implementation of a Thermal Load Reduction System in a Hyundai PHEV

    Broader source: Energy.gov [DOE]

    Presentation given by National Renewable Energy Laboratory at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about design...

  13. Vehicle Technologies Office Merit Review 2015: Cummins-ORNL\\FEERC Combustion CRADA: Characterization & Reduction of Combustion Variations

    Broader source: Energy.gov [DOE]

    Presentation given by Lawrence LIvermore National Laboratory at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about...

  14. Air Pollution Control Facility, Tax Exemption (Michigan) | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Sales Tax Incentive Provider Department of Treasury An application for a pollution control tax exemption certificate shall be filed with the state tax commission in a manner...

  15. Vehicle Technologies Office Merit Review 2014: Cummins-ORNL\\FEERC Combustion CRADA: Characterization & Reduction of Combustion Variations

    Broader source: Energy.gov [DOE]

    Presentation given by Oak Ridge National Laboratory at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about Cummins-ORNL...

  16. Carbon taxes and India

    SciTech Connect (OSTI)

    Fisher-Vanden, K.A.; Pitcher, H.M.; Edmonds, J.A.; Kim, S.H. [Pacific Northwest Lab., Richland, WA (United States); Shukla, P.R. [Indian Institute of Management, Ahmedabad (India)

    1994-07-01T23:59:59.000Z

    Using the Indian module of the Second Generation Model 9SGM, we explore a reference case and three scenarios in which greenhouse gas emissions were controlled. Two alternative policy instruments (carbon taxes and tradable permits) were analyzed to determine comparative costs of stabilizing emissions at (1) 1990 levels (the 1 X case), (2) two times the 1990 levels (the 2X case), and (3) three times the 1990 levels (the 3X case). The analysis takes into account India`s rapidly growing population and the abundance of coal and biomass relative to other fuels. We also explore the impacts of a global tradable permits market to stabilize global carbon emissions on the Indian economy under the following two emissions allowance allocation methods: (1) {open_quotes}Grandfathered emissions{close_quotes}: emissions allowances are allocated based on 1990 emissions. (2) {open_quotes}Equal per capita emissions{close_quotes}: emissions allowances are allocated based on share of global population. Tradable permits represent a lower cost method to stabilize Indian emissions than carbon taxes, i.e., global action would benefit India more than independent actions.

  17. Tax and Fiscal Policies for Promotion of Industrial EnergyEfficiency: A Survey of International Experience

    SciTech Connect (OSTI)

    Price, Lynn; Galitsky, Christina; Sinton, Jonathan; Worrell,Ernst; Graus, Wina

    2005-09-15T23:59:59.000Z

    The Energy Foundation's China Sustainable Energy Program (CSEP) has undertaken a major project investigating fiscal and tax policy options for stimulating energy efficiency and renewable energy development in China. This report, which is part of the sectoral sub-project studies on energy efficiency in industry, surveys international experience with tax and fiscal policies directed toward increasing investments in energy efficiency in the industrial sector. The report begins with an overview of tax and fiscal policies, including descriptions and evaluations of programs that use energy or energy-related carbon dioxide (CO2) taxes, pollution levies, public benefit charges, grants or subsidies, subsidized audits, loans, tax relief for specific technologies, and tax relief as part of an energy or greenhouse gas (GHG) emission tax or agreement scheme. Following the discussion of these individual policies, the report reviews experience with integrated programs found in two countries as well as with GHG emissions trading programs. The report concludes with a discussion of the best practices related to international experience with tax and fiscal policies to encourage investment in energy efficiency in industry.

  18. Buildings Energy Data Book: 7.2 Federal Tax Incentives

    Buildings Energy Data Book [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center HomeIdle Reduction WeightRebate -5 20054 Share of6351 Tax

  19. Federal Fuels Taxes and Tax Credits (released in AEO2007)

    Reports and Publications (EIA)

    2007-01-01T23:59:59.000Z

    The Annual Energy Outlook 2007 (AEO) reference case and alternative cases generally assume compliance with current laws and regulations affecting the energy sector. Some provisions of the U.S. Tax Code are scheduled to expire, or may be subject to adjustment, before the end of the projection period. In general, scheduled expirations and adjustments provided in legislation or regulations are assumed to occur, unless there is significant historical evidence to support an alternative assumption. This section examines the AEO2007 treatment of three provisions that could have significant impacts on U.S. energy markets: the gasoline excise tax, biofuel (ethanol and biodiesel) tax credits, and the production tax credit for electricity generation from certain renewable resources.

  20. Coal Conversion Facility Privilege Tax Exemptions (North Dakota)

    Broader source: Energy.gov [DOE]

    Coal Conversion Facility Privilege Tax Exemptions are granted under a variety of conditions through the North Dakota Tax Department. Privilege tax, which is in lieu of property taxes on the...

  1. Production Tax Credit for Renewable Electricity Generation (released in AEO2005)

    Reports and Publications (EIA)

    2005-01-01T23:59:59.000Z

    In the late 1970s and early 1980s, environmental and energy security concerns were addressed at the federal level by several key pieces of energy legislation. Among them, the Public Utility Regulatory Policies Act of 1978 (PURPA), P.L. 95-617, required regulated power utilities to purchase alternative electricity generation from qualified generating facilities, including small-scale renewable generators; and the Investment Tax Credit (ITC), P.L. 95-618, part of the Energy Tax Act of 1978, provided a 10% federal tax credit on new investment in capital-intensive wind and solar generation technologies.

  2. Alternative Fuels, Vehicle Technologies and Urban Logistics

    E-Print Network [OSTI]

    Witt, Maggie

    2012-01-01T23:59:59.000Z

    Technologies and Urban Logistics Policy Note prepared byvehicle technologies, urban logistics, and VMT reduction. It

  3. Renewable Energy Tax Credit (Corporate)

    Broader source: Energy.gov [DOE]

    Nebraska offers a production-based tax credit to any producer of electricity generated by wind, solar, geothermal, hydropower, fuel cells or methane gas. To qualify, a system must be placed into...

  4. Renewable Energy Sales Tax Exemption

    Broader source: Energy.gov [DOE]

    Utah exempts the purchase or lease of equipment used to generate electricity from renewable resources from the state sales tax. Eligible purchases or leases must be made for or by a renewable...

  5. Renewable Energy Sales Tax Exemption

    Broader source: Energy.gov [DOE]

    Certain renewable energy systems and equipment sold in Rhode Island are exempt from the state's sales and use tax. Eligible products include solar electric systems, DC-to-AC inverters that...

  6. Solar Property Tax Exemption (Missouri)

    Broader source: Energy.gov [DOE]

    In Missouri, solar energy systems not held for resale are exempt from state, local, and county property taxes. As enacted in July 2013, the law does not define solar energy systems; further rules...

  7. Solar Market Development Tax Credit

    Broader source: Energy.gov [DOE]

    New Mexico provides a 10% personal income tax credit (up to $9,000) for residents and businesses (non-corporate), including agricultural enterprises, who purchase and install certified...

  8. Job Tax Credit (South Carolina)

    Broader source: Energy.gov [DOE]

    The Job Tax Credit (JTC) is a statutory incentive offered to companies, both existing and new, that create new jobs in the state. The credit is available to companies that establish or expand...

  9. Renewable Energy Tax Credit (Corporate)

    Broader source: Energy.gov [DOE]

    North Carolina offers a tax credit equal to 35% of the cost of eligible renewable energy property constructed, purchased or leased by a taxpayer and placed into service in North Carolina during the...

  10. Ethanol Production Tax Credit (Kentucky)

    Broader source: Energy.gov [DOE]

    Qualified ethanol producers are eligible for an income tax credit of $1 per gallon of corn- or cellulosic-based ethanol that meets ASTM standard D4806. The total credit amount available for all...

  11. Wind Energy Manufacturing Tax Incentive

    Broader source: Energy.gov [DOE]

    With the passage of [http://www.arkansasenergy.org/media/261385/act736.pdf HB 2230 (2009)] in April 2009, the Arkansas Legislature expanded a tax incentive for manufacturers of windmill blades or...

  12. Clean Energy Tax Credit (Maryland)

    Broader source: Energy.gov [DOE]

    The Clean Energy Tax Credit is 0.85 cents for each kilowatt hour of electricity sold that was produced from a Maryland qualified energy resource during the 5-year period specified in the initial...

  13. Biomass Energy Tax Credit (Personal)

    Broader source: Energy.gov [DOE]

    In 2007 South Carolina enacted the Energy Freedom and Rural Development Act (S.B. 243), which amended previous legislation concerning a landfill methane tax credit. The original legislation,...

  14. Residential Solar Sales Tax Exemption

    Broader source: Energy.gov [DOE]

    New York enacted legislation in July 2005 exempting the sale and installation of residential solar-energy systems from the state's sales and compensating use taxes. The exemption was extended to...

  15. Coal Severance Tax (North Dakota)

    Broader source: Energy.gov [DOE]

    The Coal Severance Tax is imposed on all coal severed for sale or industrial purposes, except coal used for heating buildings in the state, coal used by the state or any political subdivision of...

  16. Renewable Energy Production Tax Credit

    Broader source: Energy.gov [DOE]

    In June 2006, [http://archive.flsenate.gov/cgi-bin/View_Page.pl?File=sb0888er.html&Dire... S.B. 888] established a renewable energy production tax credit to encourage the development and...

  17. Tax Abatement for Solar Manufacturers

    Broader source: Energy.gov [DOE]

    Senate Bill [http://www.leg.wa.gov/pub/billinfo/2005-06/Pdf/Bills/Session%20Law%20200... 5111], signed by Washington's governor in May 2005, created a reduced business and occupation (B&O) tax...

  18. Renewable Energy Property Tax Assessment

    Broader source: Energy.gov [DOE]

    Photovoltaic (PV) and wind energy facilities with a capacity of 2 megawatts (MW) AC or less are assessed locally for property taxes. Additionally, low impact hydro, geothermal, and biomass facili...

  19. Sales Tax Exemption (New York)

    Broader source: Energy.gov [DOE]

    The Sales Tax Exemption applies to the purchase of machinery and equipment, parts, tools, and supplies used or consumed in the production of tangible personal property for sale or in the production...

  20. Energy Efficiency Tax Credits (Corporate)

    Broader source: Energy.gov [DOE]

    In April 2008, Kentucky enacted legislation establishing a 30% state income tax credit for taxpayers that install certain energy efficiency measures on commercial property. The 30% credit (up to ...

  1. Renewable Energy Sales Tax Exemptions

    Broader source: Energy.gov [DOE]

    The original Wis. Stat. ß 77.54(30) was also amended in 1987 to exempt†the sale of qualifying biomass residues used as fuel for business activity from the state sales and use tax gross receipts....

  2. Renewable Energy Business Tax Incentives

    Broader source: Energy.gov [DOE]

    [http://www.azleg.gov/legtext/49leg/1r/bills/sb1403s.pdf SB 1403], signed in July of 2009, created tax incentives intended to draw renewable energy product manufacturers to Arizona. Specifically,...

  3. Renewable Energy Tax Credit (Personal)

    Broader source: Energy.gov [DOE]

    Nebraska offers a production-based tax credit to any producer of electricity generated by wind, solar, geothermal, hydropower, fuel cells or methane gas. To qualify, a system must be placed into...

  4. Clean Energy Tax Credit (Personal)

    Broader source: Energy.gov [DOE]

    '''''NOTE: Due to a high level of interest, the Clean Energy Tax Credit annual funding of $5 million for years 2012, 2013 and 2014 has been fully allocated to compensate applicants wait listed from...

  5. Characterizing Test Methods and Emissions Reduction Performance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Test Methods and Emissions Reduction Performance of In-Use Diesel Retrofit Technologies from the National Clean Diesel Campaign Characterizing Test Methods and Emissions Reduction...

  6. Life cycle assessment of a national policy proposal - The case of a Swedish waste incineration tax

    SciTech Connect (OSTI)

    Bjoerklund, Anna E. [Division of Environmental Strategies Research - fms, Royal Institute of Technology, Drottning Kristinas vaeg 30 III, SE-100 44, Stockholm (Sweden)], E-mail: annab@infra.kth.se; Finnveden, Goeran [Division of Environmental Strategies Research - fms, Royal Institute of Technology, Drottning Kristinas vaeg 30 III, SE-100 44, Stockholm (Sweden)

    2007-07-01T23:59:59.000Z

    At the core of EU and Swedish waste policy is the so-called waste hierarchy, according to which waste should first be prevented, but should otherwise be treated in the following order of prioritisation: reuse, recycling when environmentally motivated, energy recovery, and last landfilling. Some recent policy decisions in Sweden aim to influence waste management in the direction of the waste hierarchy. In 2001 a governmental commission assessed the economic and environmental impacts of introducing a weight-based tax on waste incineration, the purpose of which would be to encourage waste reduction and increase materials recycling and biological treatment. This paper presents the results of a life cycle assessment (LCA) of the waste incineration tax proposal. It was done in the context of a larger research project concerning the development and testing of a framework for Strategic Environmental Assessment (SEA). The aim of this paper is to assess the life cycle environmental impacts of the waste incineration tax proposal, and to investigate whether there are any possibilities of more optimal design of such a tax. The proposed design of the waste incineration tax results in increased recycling, but only in small environmental improvements. A more elaborate tax design is suggested, in which the tax level would partly be related to the fossil carbon content of the waste.

  7. Liquid Fuels Taxes and Credits (released in AEO2010)

    Reports and Publications (EIA)

    2010-01-01T23:59:59.000Z

    Provides a review of the treatment of federal fuels taxes and tax credits in Annual Energy Outlook 2010.

  8. Technology Jobs Tax Credit (New Mexico)

    Broader source: Energy.gov [DOE]

    This credit has two parts: a basic credit and an additional credit, each equal to 4% of the qualified expenditures on qualified research at a qualified facility. The credit amount doubles for...

  9. BUILDING TECHNOLOGIES PROGRAM Tax Deduction Qualified Software

    Broader source: Energy.gov (indexed) [DOE]

    interior and exterior lighting controls, such as occupancy sensors, time-clocks, and daylight-sensitive photocells for stepped or continuous dimming of electric lighting and the...

  10. Status of flue-gas treatment technologies for combined SO[sub 2]/NO[sub x] reduction

    SciTech Connect (OSTI)

    Livengood, C.D. (Argonne National Lab., IL (United States). Energy Systems Div.); Markussen, J.M. (USDOE Pittsburgh Energy Technology Center, PA (United States))

    1993-01-01T23:59:59.000Z

    Enactment of the Clean Air Act Amendments and passage of state legislation leading to more stringent nitrogen oxides (NO.) regulations have fueled research and development efforts on the technologies for the combined control of sulfur dioxide (SO[sub 2]) and NO[sub x]. The integrated removal of both SO[sub 2] and NO[sub x] in a single system can offer significant advantages over the use of several separate processes, including such factors as reduced system complexity, better operability, and lower costs. This paper reviews the status of a number of integrated flue-gas-cleanup systems that have reached a significant stage of development, focusing on post-combustion processes that have been tested or are ready for testing at the pilot scale or larger. A brief process description, a summary of the development status and performance achieved to date, pending commercialization issues, and process economics (when available) are given for each technology.

  11. Ormat Technologies Inc. Ormat Technologies, Inc. Announces a...

    Open Energy Info (EERE)

    Technologies, Inc. Announces a Non-Cash Pre-Tax Charge for Impairment to Its North Brawley Geothermal Power Plant Jump to: navigation, search OpenEI Reference LibraryAdd to library...

  12. The potential role of a carbon tax in U.S. fiscal reform

    SciTech Connect (OSTI)

    McKibbin, Warwick [Australian National Univ. (Australia); The Brookings Institution, Washington, DC (United States); Morris, Adele [The Brookings Institution, Washington, DC (United States); Wilcoxen, Peter [Syracuse University, NY (United States); The Brookings Institution, Washington, DC (United States); Cai, Yiyong [Commonwealth Scientific and Industrial Research Organization, Australian National Univ. (Australia)

    2012-07-24T23:59:59.000Z

    This paper examines fiscal reform options in the United States with an intertemporal computable general equilibrium model of the world economy called G-Cubed. Six policy scenarios explore two overarching issues: (1) the effects of a carbon tax under alternative assumptions about the use of the resulting revenue, and (2) the effects of alternative measures that could be used to reduce the budget deficit. We examine a simple excise tax on the carbon content of fossil fuels in the U.S. energy sector starting immediately at $15 per metric ton of carbon dioxide (CO2) and rising at 4 percent above inflation each year through 2050. We investigate policies that allow the revenue from the illustrative carbon tax to reduce the long run federal budget deficit or the marginal tax rates on labor and capital income. We also compare the carbon tax to other means of reducing the deficit by the same amount. We find that the carbon tax will raise considerable revenue: $80 billion at the outset, rising to $170 billion in 2030 and $310 billion by 2050. It also significantly reduces U.S. CO2 emissions by an amount that is largely independent of the use of the revenue. By 2050, annual CO2 emissions fall by 2.5 billion metric tons (BMT), or 34 percent, relative to baseline, and cumulative emissions fall by 40 BMT through 2050. The use of the revenue affects both broad economic impacts and the composition of GDP across consumption, investment and net exports. In most scenarios, the carbon tax lowers GDP slightly, reduces investment and exports, and increases imports. The effect on consumption varies across policies and can be positive if households receive the revenue as a lump sum transfer. Using the revenue for a capital tax cut, however, is significantly different than the other policies. In that case, investment booms, employment rises, consumption declines slightly, imports increase, and overall GDP rises significantly relative to baseline through about 2040. Thus, a tax reform that uses a carbon tax to reduce capital taxes would achieve two goals: reducing CO2 emissions significantly and expanding short-run employment and the economy. We examine three ways to reduce the deficit by an equal amount. We find that raising marginal tax rates on labor income has advantages over raising tax rates on capital income or establishing a carbon tax. A labor tax increase leaves GDP close to its baseline, reduces consumption very slightly and expands net exports slightly. Investment remains essentially unchanged. In contrast, a capital tax increase causes a significant and persistent drop in investment and much larger reductions in GDP. A carbon tax falls between the two: it lowers GDP more than a labor tax increase because it reduces investment. However, its effects on investment and GDP are more moderate than the capital tax increase, and it also significantly reduces CO2 emissions. A carbon tax thus offers a way to help reduce the deficit and improve the environment, and do so with minimal disturbance to overall economic activity.

  13. Beginning of Construction for Purposes of the Renewable Electricity Production Tax Credit and Energy Investment Tax Credit

    Broader source: Energy.gov [DOE]

    Beginning of Construction for Purposes of the Renewable Electricity Production Tax Credit and Energy Investment Tax Credit

  14. Application of Derrick Corporation's stack sizer technology for slimes reduction in 6 inch clean coal hydrocyclone circuits

    SciTech Connect (OSTI)

    Brodzik, P.

    2009-04-15T23:59:59.000Z

    The article discusses the successful introduction of Derrick Corporation's Stack Sizer technology for removing minus 200 mesh slimes from 6-inch coal hydrocyclone underflow prior to froth flotation or dewatering by screen bowl centrifuges. In 2006, the James River Coal Company selected the Stack Sizer fitted with Derrick 150 micron and 100 micron urethane screen panels for removal of the minus 100 mesh high ash clay fraction from the clean coal spiral product circuits. After this application proved successful, Derrick Corporation introduced new 75 micron urethane screen panels for use on the Stack Sizer. Evaluation of feed slurry to flotation cells and screen bowl centrifuges showed significant amounts of minus 75 micron that could potentially be removed by efficient screening technology. Removal of the minus 75 micron fraction was sought to reduce ash and moisture content of the final clean coal product. Full-scale lab tests confirmed that the Stack Sizer fitted with Derrick 75 micron urethane screen panels consistently reduced the minus 75 micron percentage in coal slurry from 6-inch clean coal hydrocyclone underflow that is approximately 15 to 20% solid by-weight and 30 to 60% minus 75 micron to a clean coal fraction that is approximately 13 to 16% minus 75 micron. As a result total ash is reduced from approximately 36 to 38% in the hydrocyclone underflow to 14 to 16% in the oversize product fraction form the Stack Sizers. 1 fig., 2 tabs., 5 photos.

  15. Final Report of a CRADA Between Pacific Northwest National Laboratory and the General Motors Company (CRADA No. PNNL/271): ďDegradation Mechanisms of Urea Selective Catalytic Reduction TechnologyĒ

    SciTech Connect (OSTI)

    Kim, Do Heui; Lee, Jong H.; Peden, Charles HF; Howden, Ken; Kim, Chang H.; Oh, Se H.; Schmieg, Steven J.; Wiebenga, Michelle H.

    2011-12-13T23:59:59.000Z

    Diesel engines can offer substantially higher fuel efficiency, good driving performance characteristics, and reduced carbon dioxide (CO2) emission compared to stoichiometric gasoline engines. Despite the increasing public demand for higher fuel economy and reduced dependency on imported oil, however, meeting the stringent emission standards with affordable methods has been a major challenge for the wide application of these fuel-efficient engines in the US market. The selective catalytic reduction of NOx by urea (urea-SCR) is one of the most promising technologies for NOx emission control for diesel engine exhausts. To ensure successful NOx emission control in the urea-SCR technology, both a diesel oxidation catalyst (DOC) and a urea-SCR catalyst with high activity and durability are critical for the emission control system. Because the use of this technology for light-duty diesel vehicle applications is new, the relative lack of experience makes it especially challenging to satisfy the durability requirements. Of particular concern is being able to realistically simulate actual field aging of the catalyst systems under laboratory conditions, which is necessary both as a rapid assessment tool for verifying improved performance and certifiability of new catalyst formulations. In addition, it is imperative to develop a good understanding of deactivation mechanisms to help develop improved catalyst materials. In this CRADA program, General Motors Company and PNNL have investigated fresh, laboratory- and vehicle-aged DOC and SCR catalysts. The studies have led to a better understanding of various aging factors that impact the long-term performance of catalysts used in the urea-SCR technology, and have improved the correlation between laboratory and vehicle aging for reduced development time and cost. This Final Report briefly highlights many of the technical accomplishments and documents the productivity of the program in terms of peer-reviewed scientific publications (2 total), reports (3 total including this Final Report), and presentations (5 total).

  16. Federal Fuels Taxes and Tax Credits (Update) (released in AEO2008)

    Reports and Publications (EIA)

    2008-01-01T23:59:59.000Z

    The Annual Energy Outlook 2008 (AEO) reference case incorporates current regulations that pertain to the energy industry. This section describes the handling of federal taxes and tax credits in AEO2008, focusing primarily on areas where regulations have changed or the handling of taxes or tax credits has been updated.

  17. Energy Saving Melting and Revert Reduction Technology (E-SMARRT): Development of Surface Engineered Coating Systems for Aluminum Pressure Die Casting Dies: Towards a 'Smart' Die Coating

    SciTech Connect (OSTI)

    Dr. John J. Moore; Dr. Jianliang Lin,

    2012-07-31T23:59:59.000Z

    The main objective of this research program was to design and develop an optimal coating system that extends die life by minimizing premature die failure. In high-pressure aluminum die-casting, the die, core pins and inserts must withstand severe processing conditions. Many of the dies and tools in the industry are being coated to improve wear-resistance and decrease down-time for maintenance. However, thermal fatigue in metal itself can still be a major problem, especially since it often leads to catastrophic failure (i.e. die breakage) as opposed to a wear-based failure (parts begin to go out of tolerance). Tooling costs remain the largest portion of production costs for many of these parts, so the ability prevent catastrophic failures would be transformative for the manufacturing industry.The technology offers energy savings through reduced energy use in the die casting process from several factors, including increased life of the tools and dies, reuse of the dies and die components, reduction/elimination of lubricants, and reduced machine down time, and reduction of Al solder sticking on the die. The use of the optimized die coating system will also reduce environmental wastes and scrap parts. Current (2012) annual energy saving estimates, based on initial dissemination to the casting industry in 2010 and market penetration of 80% by 2020, is 3.1 trillion BTU's/year. The average annual estimate of CO2 reduction per year through 2020 is 0.63 Million Metric Tons of Carbon Equivalent (MM TCE).

  18. New Market Tax Credits-REI (Oklahoma)

    Broader source: Energy.gov [DOE]

    The New Market Tax Credits-REI is a tool to meet the challenge of economic development in low-income rural and urban communities. This program Objective offers investors an attractive tax benefit...

  19. Corporate Headquarters Tax Credit (West Virginia)

    Broader source: Energy.gov [DOE]

    The Corporate Headquarters Tax Credit is available to companies who relocate their corporate headquarters to West Virginia and create 15 new jobs. The credit can offset up to 100% of the tax...

  20. Carroll County- Green Building Property Tax Credit

    Broader source: Energy.gov [DOE]

    The state of Maryland permits Carroll County (Md Code: Property Tax ß 9-308(e)) to offer property tax credits for high performance buildings if it chooses to do so.* Carroll County has exercised...

  1. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Angel Investment Credit (New Mexico) A taxpayer who files a New Mexico income tax return and who is a "qualified investor" may take a tax credit of up to 25,000 (25% of a...

  2. Rural Jobs Tax Credit (New Mexico)

    Broader source: Energy.gov [DOE]

    This credit can be applied to taxes due on (state) gross receipts, corporate income, or personal income tax. †Rural New Mexico is defined as any part of the state other than Los Alamos County;...

  3. Stop Playing Favorites with the Tax Code

    E-Print Network [OSTI]

    Taylor, Lori L.

    breaks for some firms and industries necessarily mean higher tax rates for others. Keeping rules as consistent as possible appeals to our sense of equity and promotes economic efficiency. Sales taxes on business-to-business transactions are a...

  4. Enterprise Zone Sales Tax Exemption (Kansas)

    Broader source: Energy.gov [DOE]

    The Enterprise Zone Sales Tax Exemption offers businesses located in such economic development zones a 100 percent sales tax exemption on the purchase of labor and materials to construct or remodel...

  5. Job Training Tax Credit (Rhode Island)

    Broader source: Energy.gov [DOE]

    Companies who invest in training opportunities for new or existing employees may take a corporate income tax credit equal to 50% of eligible training expenditures through the Job Training Tax...

  6. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Energy Investment Tax Credit Commercial and net metering alternative energy investments of 5,000 or more are eligible for a tax credit of up to 35% against individual or corporate...

  7. Effective Tax Strategies: It's Not Just Minimization

    E-Print Network [OSTI]

    Neuman, Stevanie Alysse Schneider

    2014-05-20T23:59:59.000Z

    This study examines managerial incentives and practices associated with firmsí tax strategy choices, as well as the relative importance of these factors in determining the primary focus of firmsí tax strategies. Understanding the determinants...

  8. Rural Job Tax Credit Program (Florida)

    Broader source: Energy.gov [DOE]

    The Rural Job Tax Credit Program is an incentive for businesses located within one of the 36-designated Qualified Rural Areas to create new jobs. The tax credit ranges from $1000 to $1500 per...

  9. Energy-Efficient Appliance Manufacturing Tax Credit

    Broader source: Energy.gov [DOE]

    '''''Note: This tax credit expired at the end of 2011. The American Taxpayer Relief Act of 2012 retroactively renewed this tax credit for certain appliances manufactured in 2012 and 2013. '''''

  10. Article 3J Tax Credits (North Carolina)

    Broader source: Energy.gov [DOE]

    Article 3J Tax Credits can be used to offset up to 50% of a taxpayerís state income and/or franchise tax liability. The credits are offered for businesses which create fulltime jobs, invest in...

  11. Tax Credit for Renewable Energy Equipment Manufacturers

    Broader source: Energy.gov [DOE]

    The Tax Credit for Renewable Energy Resource Equipment Manufacturing Facilities was enacted as a part of Oregon's Business Energy Tax Credit (BETC) in July 2007, with the passage of HB 3201. The ...

  12. Clean Coal Incentive Tax Credit (Kentucky)

    Broader source: Energy.gov [DOE]

    Clean Coal Incentive Tax Credit provides for a property tax credit for new clean coal facilities constructed at a cost exceeding $150 million and used for the purposes of generating electricity....

  13. Alternative Energy Manufacturing Tax Credit (Utah)

    Broader source: Energy.gov [DOE]

    The Alternative Energy Development Incentive (AEDI) is a post-performance non-refundable tax credit for up to 100% of new state tax revenues (including, state, corporate, sales and withholding...

  14. Stop Playing Favorites with the Tax Code†

    E-Print Network [OSTI]

    Taylor, Lori L.

    2011-01-01T23:59:59.000Z

    particularly harmful form of playing favorites with the tax code by encouraging vertical integration and discouraging reliance upon outside small businesses. Eliminating sales tax exemptions and exclusions would go a long way toward solving budget problems...

  15. Brownfield/Grayfield Tax Credit Program (Iowa)

    Broader source: Energy.gov [DOE]

    The Brownfield/Grayfield Tax Credit Program offers qualifying projects tax credits of 24% for qualifying costs of a Brownfield project and 30% if the project meets green building requirements....

  16. Jobs and Investment Tax Credit (Maine)

    Broader source: Energy.gov [DOE]

    The Jobs and Investment Tax Credit is available to businesses that create at least 100 new jobs within two years and invest at least $5 million in one year. The credit is limited to tax liability...

  17. Job Creation Tax Credits Program (Pennsylvania)

    Broader source: Energy.gov [DOE]

    The Job Creation Tax Credits Program can be used to offset business tax liabilities and is available to businesses that create 25 or more jobs or increase employment by 20% within three years of a...

  18. Solar Energy Systems Tax Credit (Personal) (Iowa)

    Broader source: Energy.gov [DOE]

    Iowa offers a 15% individual tax credit for solar energy systems. The credit is based on the federal tax credits for solar; individuals can claim 50% of the [http://dsireusa.org/incentives...

  19. Property Tax Exemption for Wind Generators (Oklahoma)

    Broader source: Energy.gov [DOE]

    The state of Oklahoma offers a five year ad valorem property tax exemption for certain windpower generators.

  20. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Buildings Property tax abatement for new non-residential and multifamily residential green buildings Eligibility: Commercial, Industrial, Multifamily Residential Savings...

  1. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Local Government, Nonprofit, State Government, Tribal Government Savings Category: Fuel Cells, Photovoltaics, Solar Water Heat Alternative Energy Personal Property Tax...

  2. UNLOCKING TAX EQUITY INVESTMENT

    Broader source: Energy.gov [DOE]

    This presentation summarizes the information given by Amber Kinetics during the DOE SunShot Grand Challenge: Summit and Technology Forum, June 13-14, 2012.

  3. Demonstration of selective catalytic reduction (SCR) technology for the control of nitrogen oxide (NO sub x ) emissions from high-sulfur coal-fired boilers

    SciTech Connect (OSTI)

    Not Available

    1991-08-01T23:59:59.000Z

    The objective of this project is to demonstrate and evaluate commercially available Selective Catalytic Reduction (SCR) catalysts from US, Japanese and European catalyst suppliers on a high-sulfur US coal-fired boiler. SCR is a post-combustion nitrogen oxide (NOx) control technology that involves injecting ammonia into the flue gas generated from coal combustion in an electric utility boiler. The flue gas containing ammonia is then passed through a reactor that contains a specialized catalyst. In the presence of the catalyst, the ammonia reacts with NOx to convert it to nitrogen and water vapor, Although SCR is widely practiced in Japan and Europe, there are numerous technical uncertainties associated with applying SCR to US coals. These uncertainties include: (1) potential catalyst deactivation due to poisoning by trace metal species present in US coals that are not present in other fuel performance of the technology and effects on the balance-of-plant equipment in the presence of high amounts of SO{sub 2} and SO{sub 3}. (3) performance of a wide variety of SCR catalyst compositions, geometries and methods of manufacture under typical high-sulfur coal-fired utility operating conditions. These uncertainties will be explored by constructing a series of small-scale SCR reactors and simultaneously exposing different SCR catalysts to flue gas derived from the combustion of high sulfur US coal.

  4. Technology disrupted

    SciTech Connect (OSTI)

    Papatheodorou, Y. [CH2M Hill (United States)

    2007-02-15T23:59:59.000Z

    Three years ago, the author presented a report on power generation technologies which in summary said 'no technology available today has the potential of becoming transformational or disruptive in the next five to ten years'. In 2006 the company completed another strategic view research report covering the electric power, oil, gas and unconventional energy industries and manufacturing industry. This article summarises the strategic view findings and then revisits some of the scenarios presented in 2003. The cost per megawatt-hour of the alternatives is given for plants ordered in 2005 and then in 2025. The issue of greenhouse gas regulation is dealt with through carbon sequestration and carbon allowances or an equivalent carbon tax. Results reveal substantial variability through nuclear power, hydro, wind, geothermal and biomass remain competitive through every scenario. Greenhouse gas scenario analysis shows coal still be viable, albeit less competitive against nuclear and renewable technologies. A carbon tax or allowance at $24 per metric ton has the same effect on IGCC cost as a sequestration mandate. However, the latter would hurt gas plants much more than a tax or allowance. Sequestering CO{sub 2} from a gas plant is almost as costly per megawatt-hour as for coal. 5 refs., 5 figs., 5 tabs.

  5. THE ECONOMIC PAYOFF FOR GLOBAL WARMING EMISSIONS REDUCTION

    E-Print Network [OSTI]

    Dr. Sam; V. Shelton; Laura A. Schaefer

    efficiency technology, such as residential electric heat pump water heaters, can cause carbon reduction to

  6. Tax credit for tight-sands gas

    SciTech Connect (OSTI)

    Schugart, G.L.

    1985-06-01T23:59:59.000Z

    There is a $3 per barrel tax credit, which is tied to crude oil prices, in the Windfall Profits Tax (WPT) for producing fuels from certain unconventional sources. Concentrating on the tight gas formations section of qualifying fuels, the author examines the tax credit and certain factors natural gas producers may want to consider in deciding on whether to choose the tax credit or the incentive prices of the Natural Gas Policy Act. The decline in oil prices is significant enough to provide some producers an opportunity to take advantage of the tax credit. They should do some tax planning by calculating the estimated break-even point for NGPA incentive prices and the nonconventional gas production tax credit.

  7. Innovative Clean Coal Technology (ICCT): 180 MW demonstration of advanced tangentially-fired combustion techniques for the reduction of nitrogen oxide (NO[sub x]) emissions from coal-fired boilers

    SciTech Connect (OSTI)

    Not Available

    1992-11-25T23:59:59.000Z

    This quarterly report discusses the technical progress of a US Department of Energy (DOE) Innovative Clean Coal Technology (ICCT) Project demonstrating advanced tangentially-fired combustion techniques for the reduction of nitrogen oxide (NO[sub x]) emissions from a coal-fired boiler. The project is being conducted at Gulf Power Company's Plant Lansing Smith Unit 2 located near Panama City, Florida. The primary objective of this demonstration is to determine the long-term effects of commercially available tangentially-fired low NO[sub x] combustion technologies on NO[sub x] emissions and boiler performance. A target of achieving fifty percent NO[sub x] reduction using combustion modifications has been established for the project. The stepwise approach that is being used to evaluate the NO[sub x] control technologies requires three plant outages to successively install the test instrumentation and the different levels of the low NO[sub x] concentric firing system (LNCFS). Following each outage, a series of four groups of tests are performed. These are (1) diagnostic, (2) performance, (3) long-term, and (4) verification. These tests are used to quantify the NO[sub x] reductions of each technology and evaluate the effects of those reductions on other combustion parameters such as particulate characteristics and boiler efficiency. This technical progress report presents the LNCFS Level I short-term data collected during this quarter. In addition, a comparison of all the long-term emissions data that have been collected to date is included.

  8. Innovative Clean Coal Technology (ICCT): 180 MW demonstration of advanced tangentially-fired combustion techniques for the reduction of nitrogen oxide (NO{sub x}) emissions from coal-fired boilers. Fourth quarterly technical progress report, [October--December, 1992

    SciTech Connect (OSTI)

    Not Available

    1992-12-31T23:59:59.000Z

    This quarterly report discusses the technical progress of a U. S. Department of Energy (DOE) Innovative Clean Coal Technology (ICCT) Project demonstrating advanced tangentially-fired combustion techniques for the reduction of nitrogen oxide (NOx) emissions from a coal-fired boiler. The project is being conducted at Gulf Power Company`s Plant Lansing Smith Unit 2 located near Panama City, Florida. The primary objective of this demonstration is to determine the long-term effects of commercially available tangentially-fired low NOx combustion technologies on NOx emissions and boiler performance. A target of achieving fifty percent NOx reduction using combustion modifications has been established for the project. The stepwise approach that is being used to evaluate the NOx control technologies requires three plant outages to successively install the test instrumentation and the different levels of the low NOx concentric firing system (LNCFS). Following each outage, a series of four groups of tests are performed. These are (1) diagnostic, (2) performance, (3) long-term, and (4) verification. These tests are used to quantify the NOx reductions of each technology and evaluate the effects of those reductions on other combustion parameters such as particulate characteristics and boiler efficiency. During this quarter, tests of the LNCFS Level III system were conducted to determine the effect that fuel fineness has on NOx emissions and unburned carbon levels. Results showed that changing the fineness of the fuel has almost no effect on NOx emissions; however, unburned carbon levels can be reduced significantly by increasing fuel fineness.

  9. Innovative clean coal technology (ICCT): Demonstration of selective catalytic reduction (SCR) technology for the control of nitrogen oxide (NO{sub x}) emissions from high-sulfur coal-fired boilers. Fourth quarterly progress report

    SciTech Connect (OSTI)

    NONE

    1992-12-31T23:59:59.000Z

    The objective of this project is to demonstrate and evaluate commercially available Selective Catalytic Reduction (SCR) catalysts from US, Japanese and European catalyst suppliers on a high-sulfur US coal-fired boiler. SCR is a post-combustion nitrogen oxide (NO{sub x}) control technology that involves injecting ammonia into the flue gas generated from coal combustion in an electric utility boiler. The flue gas containing ammonia is then passed through a reactor that contains a specialized catalyst. In the presence of the catalyst, the ammonia reacts with NO{sub x} to convert it to nitrogen and water vapor. Although SCR is widely practiced in Japan and Europe, there are numerous technical uncertainties include: (1) potential catalyst deactivation due to poisoning by trace metal species present in US coals that are not present in other fuels; (2) performance of the technology and effects on the balance-of-plant equipment in the presence of high amounts of SO{sub 2} and SO{sub 3}; and (3) performance of a wide variety of SCR catalyst compositions, geometries and methods of manufacture under typical high-sulfur coal-fired utility operating conditions. These uncertainties will be explored by constructing a series of small-scale SCR reactors and simultaneously exposing different SCR catalysts to flue gas derived from the combustion of high sulfur US coal.

  10. Countries Gasoline Prices Including Taxes

    Gasoline and Diesel Fuel Update (EIA)

    Selected Countries (U.S. dollars per gallon, including taxes) Date Belgium France Germany Italy Netherlands UK US 51115 6.15 6.08 6.28 6.83 6.96 6.75 3.06 5415 6.14 6.06...

  11. Countries Diesel Prices Excluding Taxes

    Gasoline and Diesel Fuel Update (EIA)

    excluding taxes) Date Belgium France Germany Italy Netherlands UK US 42715 2.45 2.23 2.40 2.41 2.44 2.40 2.37 42015 2.24 2.15 2.33 2.33 2.34 2.33 2.33 41315 2.21 2.03 2.21...

  12. Payments in Lieu of Taxes

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-05-08T23:59:59.000Z

    To establish general Department of Energy (DOE) procedures and responsibilities with regard to processing applications for payments in lieu of taxes (PILT) to certain State and local governments under the authority of section 168 of the Atomic Energy Act of 1954, as amended (42 U.S.C. 2208). Cancels DOE 2100.12A. Certified 1-31-07.

  13. Technology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening a solidSynthesis of 2D AlloysTrails NewsTechnologyTechnology A

  14. Technology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening a solidSynthesis of 2D AlloysTrails NewsTechnologyTechnology

  15. Innovative Clean Coal Technology (ICCT). Demonstration of Selective Catalytic Reduction (SCR) technology for the control of nitrogen oxide (NO{sub x}) emissions from high-sulfur coal-fired boilers: Volume 1. Final report

    SciTech Connect (OSTI)

    NONE

    1996-10-01T23:59:59.000Z

    The objective of this project is to demonstrate and evaluate commercially available Selective Catalytic Reduction (SCR) catalysts from U.S., Japanese and European catalyst suppliers on a high-sulfur U.S. coal-fired boiler. SCR is a post-combustion nitrogen oxide (NO.) control technology that involves injecting ammonia into the flue gas generated from coal combustion in an electric utility boiler. The flue gas containing ammonia is then passed through a reactor that contains a specialized catalyst. In the presence of the catalyst, the ammonia reacts with NO. to convert it to nitrogen and water vapor. Although SCR is widely practiced in Japan and Europe on gas-, oil-, and low-sulfur coal- fired boilers, there are several technical uncertainties associated with applying SCR to U.S. coals. These uncertainties include: 1) potential catalyst deactivation due to poisoning by trace metal species present in U.S. coals that are not present in other fuels. 2) performance of the technology and effects on the balance-of- plant equipment in the presence of high amounts of SO{sub 2} and SO{sub 3}. 3) performance of a wide variety of SCR catalyst compositions, geometries and methods of manufacturer under typical high-sulfur coal-fired utility operating conditions. These uncertainties were explored by operating nine small-scale SCR reactors and simultaneously exposing different SCR catalysts to flue gas derived from the combustion of high sulfur U.S. coal. In addition, the test facility operating experience provided a basis for an economic study investigating the implementation of SCR technology.

  16. Tax policy to combat global warming : on designing a carbon tax

    E-Print Network [OSTI]

    Poterba, James M.

    1991-01-01T23:59:59.000Z

    This paper develops several points concerning the design and implementation of a carbon tax. First, if implemented without any offsetting changes in transfer programs, the carbon tax would be regressive. This regressivity ...

  17. Are Tax and Non-Tax Factors Associated with FIN 48 Disclosures?

    E-Print Network [OSTI]

    McDonald, Janet L.

    2011-10-21T23:59:59.000Z

    benefits of aggressive tax positions, I examine whether firmsí level of aggressive tax positions is influenced by (1) financial reporting aggressiveness, (2) choice of auditor, (3) analyst coverage, and (4) corporate governance quality. Using ordinary least...

  18. Buildings Energy Data Book: 7.2 Federal Tax Incentives

    Buildings Energy Data Book [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center HomeIdle Reduction WeightRebate -5 20054 Share of6351 Tax Incentives

  19. The Emerging Industry Sales and Use Tax Credit

    Broader source: Energy.gov [DOE]

    The Emerging Industry Sales and Use Tax Credit allows a taxpayer to take a credit, to apply for a refund of taxes paid, or to apply for authority to make tax-exempt purchases of machinery and...

  20. R&D Small Business Tax Credit (New Mexico)

    Broader source: Energy.gov [DOE]

    A qualified small business R&D small business is eligible for a credit equal to the sum of all gross receipts taxes, compensating taxes, or withholding taxes due to the state for up to three...

  1. Montana Oil and Natural Gas Production Tax Act (Montana)

    Broader source: Energy.gov [DOE]

    The State of Montana imposes a quarterly tax on the gross taxable value of oil and natural gas production. This tax replaces several previous taxes, simplifying fees and rates as well as compliance...

  2. added tax rate: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    budgetary expenses must be paid attention strictly. Because coefficients of value-added tax and corporate income tax are positive and significant, an increase in value-added tax...

  3. Globalization and Developing Countries - a Shrinking Tax Base ?

    E-Print Network [OSTI]

    Aizenman, Joshua; Jinjarak, Yothin

    2006-01-01T23:59:59.000Z

    VAT/GDP Seigniorage/GDP Tariff/GDP Repression/GDP Total Tax/S.D. Min Max Correlations: Taxes VAT Seign. Tariff RepressSeigniorage/GDP Tariff/GDP Repression/GDP Total Tax/GDP

  4. NYC property tax exemption program : existing policies and future planning

    E-Print Network [OSTI]

    Wu, Jenny Chiani

    2012-01-01T23:59:59.000Z

    New York City's tax expenditures relate to real property tax totaled $4.5 billion in fiscal year 2012. The largest expenditure relates to the "421-a" tax exemption program for new multi-family residential real estate ...

  5. What Improvements Have You Made for an Energy Efficiency Tax...

    Broader source: Energy.gov (indexed) [DOE]

    Addthis Related Articles Energy Tax Credits: Stay Warm and Save MORE Money Celebrate Energy Awareness Month and Get a Tax Credit What Will You be Buying for an Energy Tax...

  6. Tax Credit for Manufacturers of Small Wind Turbines

    Broader source: Energy.gov [DOE]

    '''''Note: After a 2 year moratorium on all state tax credits, this credit may be claimed for tax year 2012 and subsequent tax years, for small wind turbines manufactured on or after July 1, 2012.'...

  7. Howard County- High Performance and Green Building Property Tax Credit

    Broader source: Energy.gov [DOE]

    The state of Maryland permits local governments (Md Code: Property Tax ß 9-242) to offer property tax credits for high performance buildings and energy conservation devices (Md Code: Property Tax ß...

  8. Harris County- Property Tax Abatement for Green Commercial Buildings

    Broader source: Energy.gov [DOE]

    This type of tax abatement may be sought by an applicant of the Countyís standard economic development tax abatement, or as a stand-alone tax abatement. When an applicant seeks only a LEED Certif...

  9. Local Option- Property Tax Credit for High Performance Buildings

    Broader source: Energy.gov [DOE]

    Similar to Maryland's Local Option Property Tax Credit for Renewable Energy, Title 9 of Maryland's property tax code creates an optional property tax credit for high performance buildings. This...

  10. Small Business Administration (SBA) Guarantee Fee Tax Credit (Oklahoma)

    Broader source: Energy.gov [DOE]

    The Small Business Administration (SBA) Guarantee Fee Tax Credit allows for small businesses operating in Oklahoma to claim a credit against income tax liability. This credit may be claimed for tax...

  11. Building Technologies Office: 179D DOE Calculator

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    179D DOE Calculator EERE Building Technologies Office 179D DOE Calculator Printable Version Bookmark and Share What is the 179D federal tax deduction? Section 179D of the...

  12. Innovative Clean Coal Technology (ICCT): Demonstration of selective catalytic reduction technology for the control of nitrogen oxide emissions from high-sulfur coal-fired boilers. First and second quarterly technical progress reports, [January--June 1995]. Final report

    SciTech Connect (OSTI)

    NONE

    1995-12-31T23:59:59.000Z

    The objective of this project is to demonstrate and evaluate commercially available Selective Catalytic Reduction (SCR) catalysts from US, Japanese and European catalyst suppliers on a high-sulfur US coal-fired boiler. SCR is a post-combustion nitrogen oxide (NO{sub x}) control technology that involves injecting ammonia (NH{sub 3}) into the flue gas generated from coal combustion in an electric utility boiler. The flue gas containing ammonia is then passed through a reactor containing a specialized catalyst. In the presence of the catalyst, the ammonia reacts with NO{sub x} to convert it to nitrogen and water vapor. Although SCR is widely practiced in Japan and Europe on gas-, oil-, and low-sulfur coal-fired boilers, there are several technical uncertainties associated with applying SCR to US coals. These uncertainties include: (1) potential catalyst deactivation due to poisoning by trace metal species present in US coals that are not present in other fuels. (2) performance of the technology and effects on the balance-of-plant equipment in the presence of high amounts of SO{sub 2} and SO{sub 3}. (3) performance of a wide variety of SCR catalyst compositions, geometries, and methods of manufacture under typical high-sulfur coal-fired utility operating conditions. These uncertainties are being explored by operating a series of small-scale SCR reactors and simultaneously exposing different SCR catalysts to flue gas derived from the combustion of high sulfur US coal. The demonstration is being performed at Gulf Power Company`s Plant Crist Unit No. 5 (75 MW nameplate capacity) near Pensacola, Florida. The project is funded by the US Department of Energy (DOE), Southern Company Services, Inc. (SCS on behalf of the entire Southern electric system), the Electric Power Research Institute (EPRI), and Ontario Hydro. SCS is the participant responsible for managing all aspects of this project.

  13. Innovative Clean Coal Technology (ICCT): Demonstration of Selective Catalytic Reduction (SCR) technology for the control of nitrogen oxide (NO{sub x}) emissions from high-sulfur coal-fired boilers. Third quarterly technical progress report 1992

    SciTech Connect (OSTI)

    Not Available

    1992-11-01T23:59:59.000Z

    The objective of this project is to demonstrate and evaluate commercially available Selective Catalytic Reduction (SCR) catalysts from US, Japanese and European catalyst suppliers on a high-sulfur US coal-fired boiler. SCR is a post-combustion nitrogen oxide (NO{sub x}) control technology that involves injecting ammonia into the flue gas generated from coal combustion in an electric utility boiler. The flue gas containing ammonia is then passed through a reactor that contains a specialized catalyst. In the presence of the catalyst, the ammonia reacts with NO{sub x} to convert it to nitrogen and water vapor. Although SCR is widely practiced in Japan and Europe on gas-, oil-, and low-sulfur, coal-fired boilers, there are several technical uncertainties associated with applying SCR to US coals. These uncertainties include: (1) potential catalyst deactivation due to poisoning by trace metal species present in US coals that are not present in other fuels. (2) performance of the technology and effects on the balance-of-plant equipment in the presence of high amounts of SO{sub 2} and SO{sub 3} and (3) performance of a wide variety of SCR catalyst compositions, geometries and methods of manufacture under typical high-sulfur coal-fired utility operating conditions. These uncertainties will be explored by constructing a series of small- scale SCR reactors and simultaneously exposing different SCR catalysts to flue gas derived from the combustion of high-sulfur US coal. The demonstration will be performed at Gulf Power Company`s Plant Crist Unit No. 5 (75 MW capacity) near Pensacola, Florida.

  14. Innovative Clean Coal Technology (ICCT): Demonstration of Selective Catalytic Reduction (SCR) technology for the control of nitrogen oxide (NO[sub x]) emissions from high-sulfur coal-fired boilers

    SciTech Connect (OSTI)

    Not Available

    1992-11-01T23:59:59.000Z

    The objective of this project is to demonstrate and evaluate commercially available Selective Catalytic Reduction (SCR) catalysts from US, Japanese and European catalyst suppliers on a high-sulfur US coal-fired boiler. SCR is a post-combustion nitrogen oxide (NO[sub x]) control technology that involves injecting ammonia into the flue gas generated from coal combustion in an electric utility boiler. The flue gas containing ammonia is then passed through a reactor that contains a specialized catalyst. In the presence of the catalyst, the ammonia reacts with NO[sub x] to convert it to nitrogen and water vapor. Although SCR is widely practiced in Japan and Europe on gas-, oil-, and low-sulfur, coal-fired boilers, there are several technical uncertainties associated with applying SCR to US coals. These uncertainties include: (1) potential catalyst deactivation due to poisoning by trace metal species present in US coals that are not present in other fuels. (2) performance of the technology and effects on the balance-of-plant equipment in the presence of high amounts of SO[sub 2] and SO[sub 3] and (3) performance of a wide variety of SCR catalyst compositions, geometries and methods of manufacture under typical high-sulfur coal-fired utility operating conditions. These uncertainties will be explored by constructing a series of small- scale SCR reactors and simultaneously exposing different SCR catalysts to flue gas derived from the combustion of high-sulfur US coal. The demonstration will be performed at Gulf Power Company's Plant Crist Unit No. 5 (75 MW capacity) near Pensacola, Florida.

  15. City of Cleveland- Residential Property Tax Abatement for Green Buildings

    Broader source: Energy.gov [DOE]

    The City of Cleveland, in cooperation with the Cuyahoga County Auditor's Office, provides a 100% tax abatement for residential properties built to the Cleveland Green Building Standard. Tax...

  16. Federal Tax Incentives for PV: Potential Implications for Program Design

    E-Print Network [OSTI]

    Wiser, Ryan; Bolinger, Mark

    2006-01-01T23:59:59.000Z

    Forthcoming. ďEPAct 2005ís PV Tax Credits: What Are TheyAssumptions ē Installed PV system costs exhibit economies ofFederal Tax Incentives for PV Potential Implications for

  17. Harford County- Property Tax Credit for Solar and Geothermal Devices

    Broader source: Energy.gov [DOE]

    Harford County offers a tax credit from real property taxes imposed on residential buildings, nonresidential buildings, or other structures that use solar or geothermal devices for heating, cooling...

  18. Geothermal Industry Applauds Congressional Action on Tax Legislation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Applauds Congressional Action on Tax Legislation Geothermal Industry Applauds Congressional Action on Tax Legislation January 1, 2013 - 4:11pm Addthis Washington, D.C. -- The...

  19. City of Cincinnati- Property Tax Abatement for Green Buildings

    Broader source: Energy.gov [DOE]

    The City of Cincinnati offers property tax abatements for residential and commercial buildings constructed or renovated to meet LEED certification standards. The original green building tax...

  20. Treasury, Energy Announce Guidance for Tax Treatment of Smart...

    Office of Environmental Management (EM)

    Treasury, Energy Announce Guidance for Tax Treatment of Smart Grid Investment Grants Treasury, Energy Announce Guidance for Tax Treatment of Smart Grid Investment Grants March 10,...

  1. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Fuel Production Facility Incentives (Kentucky) The Kentucky Economic Development and Finance Authority (KEDFA) provides tax incentives to construct, retrofit, or upgrade an...

  2. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    generally results in a lower... Eligibility: Agricultural Savings Category: Photovoltaics, Solar Water Heat Business Energy Investment Tax Credit (ITC) '''''Note: Note: The...

  3. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Utility Savings Category: Fuel Cells, Fuel Cells using Renewable Fuels, Photovoltaics, Solar Water Heat Business Energy Investment Tax Credit (ITC) '''''Note: Note: The...

  4. Green Energy Property Tax Assessment (Tennessee) | Department...

    Broader source: Energy.gov (indexed) [DOE]

    the Treasury Tennessee offers a special ad valorem property tax assessment for certified green energy production facilities. Property that generates electricity from a certified...

  5. Pollution Control Equipment Tax Deduction (Alabama)

    Broader source: Energy.gov [DOE]

    The Pollution Control Equipment Tax Deduction allows businesses to deduct from their Alabama net worth the net amount invested in all devices, facilities, or structures, and all identifiable...

  6. Clean and Green Property Tax Incentives

    Broader source: Energy.gov [DOE]

    In 2007, the Legislature passed House Bill 3 (May special session) that established property tax incentives to encourage energy projects with less environmental impact than conventional facilities....

  7. Tax-Exempt Bond Financing (Delaware)

    Broader source: Energy.gov [DOE]

    The Delaware Economic Development Authority provides tax-exempt bond financing for financial assistance to new or expanding businesses, governmental units and certain organizations that are exempt...

  8. Property Tax Assessment for Commercial Wind Farms

    Broader source: Energy.gov [DOE]

    Pennsylvania enacted legislation in November 2006 providing that wind turbines and related equipment (including towers and foundations) may not be counted by tax assessors when setting property...

  9. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    & Savings Tax Credits, Rebates & Savings Moratorium on Construction of Nuclear Power Facilities (Connecticut) No construction shall commence on a fifth nuclear power facility until...

  10. Renewable Energy Production Tax Credits (Corporate)

    Broader source: Energy.gov [DOE]

    In June 2005, Iowa enacted legislation creating two separate production tax credit programs for energy generated by eligible wind and renewable energy facilities. An eligible facility can qualify...

  11. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Category: Lighting, Fuel Cells using Renewable Fuels, Photovoltaics, Solar Water Heat Alternative Energy Investment Tax Credit (Corporate) Commercial and net metering...

  12. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Tribal Government Savings Category: Fuel Cells, Photovoltaics, Solar Water Heat Alternative Energy Personal Property Tax Exemption '''''Note: The exemption may only be...

  13. Alternative Energy Product Manufacturers Tax Credit | Department...

    Broader source: Energy.gov (indexed) [DOE]

    and Revenue Provider New Mexico Energy, Minerals and Natural Resources Department The Alternative Energy Product Manufacturers tax credit may be claimed for manufacturing...

  14. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Alternative Energy and Energy Conservation Patent Exemption (Personal) Massachusetts offers a personal income tax deduction for any income received from the sale of a patent or...

  15. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Credits, Rebates & Savings Tax Credits, Rebates & Savings California Solar Initiative- Solar Thermal Program '''''Note: This program was modified by AB 2249, signed in September...

  16. Renewable Electricity Production Tax Credit (PTC)

    Broader source: Energy.gov [DOE]

    '''''Note: The American Recovery and Reinvestment Act of 2009 allows taxpayers eligible for the federal renewable electricity production tax credit (PTC) to take the federal business energy...

  17. End-use taxes: Current EIA practices

    SciTech Connect (OSTI)

    Not Available

    1994-08-17T23:59:59.000Z

    There are inconsistencies in the EIA published end-use price data with respect to Federal, state, and local government sales and excise taxes; some publications include end-use taxes and others do not. The reason for including these taxes in end-use energy prices is to provide consistent and accurate information on the total cost of energy purchased by the final consumer. Preliminary estimates are made of the effect on prices (bias) reported in SEPER (State Energy Price and Expenditure Report) resulting from the inconsistent treatment of taxes. EIA has undertaken several actions to enhance the reporting of end-use energy prices.

  18. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Rebates & Savings Tax Credits, Rebates & Savings AEP Ohio- Commercial New Construction Energy Efficiency Rebate Program (Ohio) AEP Ohio offers incentives to commercial customers...

  19. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Public Utility, Rural Electric Cooperative, Transportation, Utility Savings Category: Fuel Cells, Photovoltaics Clean and Green Property Tax Incentives In 2007, the Legislature...

  20. Clean Energy Production Tax Credit (Corporate)

    Broader source: Energy.gov [DOE]

    Maryland offers a production tax credit for electricity generated by wind, geothermal energy, solar energy, hydropower, hydrokinetic, municipal solid waste and biomass resources. Eligible biomass...

  1. Renewable Energy Production Tax Credit (Corporate)

    Broader source: Energy.gov [DOE]

    '''''Note: this tax credit is only available for systems installed on or after December 31, 2010, and before January 1, 2021.'''''

  2. Renewable Energy Production Tax Credit (Personal)

    Broader source: Energy.gov [DOE]

    '''''Note: this tax credit is only available for systems installed on or after December 31, 2010, and before January 1, 2021.'''''

  3. Clean Energy Production Tax Credit (Personal)

    Broader source: Energy.gov [DOE]

    Maryland offers a production tax credit for electricity generated by wind, geothermal energy, solar energy, hydropower, hydrokinetic, municipal solid waste and biomass resources. Eligible biomass...

  4. Renewable Energy Production Tax Credit (Personal)

    Broader source: Energy.gov [DOE]

    In June 2005, Iowa enacted legislation creating two separate production tax credit programs for energy generated by eligible wind and renewable energy facilities. An eligible facility can qualify...

  5. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Credits, Rebates & Savings Tax Credits, Rebates & Savings Delaware Electric Cooperative- Green Energy Fund '''''Note: The Green Energy Fund regulations are currently under...

  6. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Credits, Rebates & Savings Tax Credits, Rebates & Savings Moratorium on Construction of Nuclear Power Facilities (Connecticut) No construction shall commence on a fifth nuclear...

  7. Tax-Exempt Industrial Revenue Bonds (Kansas)

    Broader source: Energy.gov [DOE]

    Tax-Exempt Industrial Revenue Bonds are issued by cities and counties for the purchase, construction, improvement or remodeling of a facility for agricultural, commercial, hospital, industrial,...

  8. Business Energy Investment Tax Credit (ITC)

    Broader source: Energy.gov [DOE]

    '''''Note: Note: The American Recovery and Reinvestment Act of 2009 allows taxpayers eligible for the federal renewable electricity production tax credit (PTC)* to take the federal business energy...

  9. Company Name Tax Credit* Manufacturing Facility's

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    new, distributed, utility-scale hydropower projects, as well as for retrofitting dams and irrigation canals. With more than 2 million in 48C Advanced Energy Manufacturing Tax...

  10. Property Tax Exemption for Wind Generators

    Broader source: Energy.gov [DOE]

    Manufacturing facilities (broadly defined as ďfacilities engaged in the mechanical or chemical transformation of materials or substances into new productsĒ) are eligible for the property tax exem...

  11. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    tax credit for residential energy property initially applied to solar-electric systems, solar water heating systems and fuel cells. The... Eligibility: Residential Savings...

  12. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Local Government, Nonprofit, State Government, Tribal Government Savings Category: Fuel Cells, Photovoltaics, Solar Water Heat Air-Quality Improvement Tax Incentives The Ohio Air...

  13. Local Option- Property Tax Exemption for Solar

    Broader source: Energy.gov [DOE]

    Virginia allows any county, city or town to exempt or partially exempt solar energy equipment or recycling equipment from local property taxes. Residential, commercial or industrial property is...

  14. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tax Credits, Rebates & Savings Burbank Water and Power- Residential and Commercial Solar Support Program '''''Burbank Water and Power (BWP) accepted applications for...

  15. Geothermal Technologies Newsletter

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy's (DOE) Geothermal Technologies Newsletter features the latest information about its geothermal research and development efforts. The Geothermal Resources Council (GRC)ó a tax-exempt, non-profit, geothermal educational association ó publishes quarterly as an insert in its GRC Bulletin.

  16. Economic Recovery Tax Act of 1981: its effect on negotiating oil lease bonus payments

    SciTech Connect (OSTI)

    Nixon, C.; Fambrough, J.

    1982-09-01T23:59:59.000Z

    The Economic Recovery Tax Act of 1981, with its declining individual income tax rates, has made it more attractive in many cases for both the lessor (landowner) and lessee (oil and gas company) to have bonus lease payments paid and received on the installment basis rather than as a lump-sum. While the reduction in the maximum individual tax rate from 70 percent to 50 percent reduces some of the advantages of installment reporting, many moderate income lessors should still be able to benefit by this strategy. Both the lessor and lessee can utilize equations (1) and (2) when negotiating oil lease bonus payments to maximize their after-tax returns. The equations are flexible enough to allow for analysis of delays rentals, advance royalties, and minimum royalties as well. Since the after-tax discount rate has a significant impact on the resulting present values obtained, caution should be used in determining both the lessor's and lessee's rates. If the lessor and lessee have different discount rates due to alternative investment opportunities, the relative benefits of the lump-sum versus installment strategy may change. (JMT)

  17. EA-1472: Commercial Demonstration fo the Low Nox Burner/Separated Over-Fire Air (LNB/SOFA) Integration System Emission Reduction Technology, Holcolm Station, Sunflower Electric Power Corporation Finnety County, Kansas

    Broader source: Energy.gov [DOE]

    The DOE has prepared an Environmental Assessment (EA), to analyze the potential impacts of the commercial application of the Low-NOx Burner/Separated Over-Fire Air (LNB/SOFA) integration system to achieve nitrogen oxide (NOx) emissions reduction at Sunflowerís Holcomb Unit No. 1 (Holcomb Station), located near Garden City, in Finney County, Kansas. The Holcomb Station would be modified in three distinct phases to demonstrate the synergistic effect of layering NOx control technologies.

  18. Innovative Clean Coal Technology (ICCT): 180 MW demonstration of advanced tangentially-fired combustion techniques for the reduction of nitrogen oxide (NO{sub x}) emissions from coal-fired boilers. Technical progress report, second quarter 1992

    SciTech Connect (OSTI)

    Not Available

    1992-11-25T23:59:59.000Z

    This quarterly report discusses the technical progress of a US Department of Energy (DOE) Innovative Clean Coal Technology (ICCT) Project demonstrating advanced tangentially-fired combustion techniques for the reduction of nitrogen oxide (NO{sub x}) emissions from a coal-fired boiler. The project is being conducted at Gulf Power Company`s Plant Lansing Smith Unit 2 located near Panama City, Florida. The primary objective of this demonstration is to determine the long-term effects of commercially available tangentially-fired low NO{sub x} combustion technologies on NO{sub x} emissions and boiler performance. A target of achieving fifty percent NO{sub x} reduction using combustion modifications has been established for the project. The stepwise approach that is being used to evaluate the NO{sub x} control technologies requires three plant outages to successively install the test instrumentation and the different levels of the low NO{sub x} concentric firing system (LNCFS). Following each outage, a series of four groups of tests are performed. These are (1) diagnostic, (2) performance, (3) long-term, and (4) verification. These tests are used to quantify the NO{sub x} reductions of each technology and evaluate the effects of those reductions on other combustion parameters such as particulate characteristics and boiler efficiency. This technical progress report presents the LNCFS Level I short-term data collected during this quarter. In addition, a comparison of all the long-term emissions data that have been collected to date is included.

  19. Innovative Clean Coal Technology (ICCT): 180 MW demonstration of advanced tangentially-fired combustion techniques for the reduction of nitrogen oxide (NO{sub x}) emissions from coal-fired boilers. Technical progress report, first quarter 1992

    SciTech Connect (OSTI)

    Not Available

    1992-05-20T23:59:59.000Z

    This quarterly report discusses the technical progress of a US Department of Energy (DOE) Innovative Clean Coal Technology (ICCT) Project demonstrating advanced tangentially-fired combustion techniques for the reduction of nitrogen oxide (NO{sub x}) emissions from a coal-fired boiler. The project is being conducted at Gulf Power Company`s Plant Lansing Smith Unit 2 located near Panama City, Florida. The primary objective of this demonstration is to determine the long-term effects of commercially available tangentially-fired low NO{sub x} combustion technologies on NO{sub x} emissions and boiler performance. A target of achieving fifty percent NO{sub x} reduction using combustion modifications has been established for the project. The stepwise approach that is being used to evaluate the NO{sub x} control technologies requires three plant outages to successively install the test instrumentation and the different levels of the low NO{sub x} concentric firing system (LNCFS). Following each outage, a series of four groups of tests are performed. These are (1) diagnostic, (2) performance, (3) long-term, and (4) verification. These tests are used to quantify the NO{sub x} reductions of each technology and evaluate the effects of those reductions on other combustion parameters such as particulate characteristics and boiler efficiency. This technical progess report presents the LNCFS Level III long-term data collected during this quarter. NO{sub x} emissions for each day of long-term testing are presented. The average NO{sub x} emission during long-term testing was 0.39 lb/MBtu at an average load of 155 MW. The effect of the low NO{sub x} combustion system on other combustion parameters such as carbon monoxide, excess oxygen level, and carbon carryover are also included.

  20. Innovative Clean Coal Technology (ICCT): 180 MW demonstration of advanced tangentially-fired combustion techniques for the reduction of nitrogen oxide (NO[sub x]) emissions from coal-fired boilers

    SciTech Connect (OSTI)

    Not Available

    1992-05-20T23:59:59.000Z

    This quarterly report discusses the technical progress of a US Department of Energy (DOE) Innovative Clean Coal Technology (ICCT) Project demonstrating advanced tangentially-fired combustion techniques for the reduction of nitrogen oxide (NO[sub x]) emissions from a coal-fired boiler. The project is being conducted at Gulf Power Company's Plant Lansing Smith Unit 2 located near Panama City, Florida. The primary objective of this demonstration is to determine the long-term effects of commercially available tangentially-fired low NO[sub x] combustion technologies on NO[sub x] emissions and boiler performance. A target of achieving fifty percent NO[sub x] reduction using combustion modifications has been established for the project. The stepwise approach that is being used to evaluate the NO[sub x] control technologies requires three plant outages to successively install the test instrumentation and the different levels of the low NO[sub x] concentric firing system (LNCFS). Following each outage, a series of four groups of tests are performed. These are (1) diagnostic, (2) performance, (3) long-term, and (4) verification. These tests are used to quantify the NO[sub x] reductions of each technology and evaluate the effects of those reductions on other combustion parameters such as particulate characteristics and boiler efficiency. This technical progess report presents the LNCFS Level III long-term data collected during this quarter. NO[sub x] emissions for each day of long-term testing are presented. The average NO[sub x] emission during long-term testing was 0.39 lb/MBtu at an average load of 155 MW. The effect of the low NO[sub x] combustion system on other combustion parameters such as carbon monoxide, excess oxygen level, and carbon carryover are also included.

  1. Innovative Clean Coal Technology (ICCT): 500 MW demonstration of advanced wall-fired combustion techniques for the reduction of nitrogen oxide (NO sub x ) emissions from coal-fired boilers

    SciTech Connect (OSTI)

    Not Available

    1992-02-03T23:59:59.000Z

    This quarterly report discusses the technical progress of an Innovative Clean Coal Technology (ICCT) demonstration of advanced wall-fired combustion techniques for the reduction of nitrogen oxide (NO{sub x}) emissions from coal-fired boilers. The project is being conducted at Georgia Power Company's Plant Hammond Unit 4 located near Rome, Georgia. The primary goal of this project is the characterization of the low NO{sub x} combustion equipment through the collection and analysis of long-term emissions data. A target of achieving fifty percent NO{sub x} reduction using combustion modifications has been established for the project. The project provides a stepwise retrofit of an Advanced Overfire Air (AOFA) system followed by Low NO{sub x} Burners (LNB). During each test phase of the project, diagnostic, performance, long-term, and verification testing will be performed. These tests are used to quantify the NO{sub x} reductions of each technology and evaluate the effects of those reductions on other combustion parameters such as particulate characteristics and boiler efficiency.

  2. Innovative Clean Coal Technology (ICCT): 500 MW demonstration of advanced wall-fired combustion techniques for the reduction of nitrogen oxide (NO{sub x}) emissions from coal-fired boilers. Technical progress report, third quarter 1991

    SciTech Connect (OSTI)

    Not Available

    1992-02-03T23:59:59.000Z

    This quarterly report discusses the technical progress of an Innovative Clean Coal Technology (ICCT) demonstration of advanced wall-fired combustion techniques for the reduction of nitrogen oxide (NO{sub x}) emissions from coal-fired boilers. The project is being conducted at Georgia Power Company`s Plant Hammond Unit 4 located near Rome, Georgia. The primary goal of this project is the characterization of the low NO{sub x} combustion equipment through the collection and analysis of long-term emissions data. A target of achieving fifty percent NO{sub x} reduction using combustion modifications has been established for the project. The project provides a stepwise retrofit of an Advanced Overfire Air (AOFA) system followed by Low NO{sub x} Burners (LNB). During each test phase of the project, diagnostic, performance, long-term, and verification testing will be performed. These tests are used to quantify the NO{sub x} reductions of each technology and evaluate the effects of those reductions on other combustion parameters such as particulate characteristics and boiler efficiency.

  3. DENSE PHASE REBURN COMBUSTION SYSTEM (DPRCS) DEMONSTRATION ON A 154 MWE TANGENTIAL FURNACE: ADDITIONAL AREA OF INTEREST-TO DEVELOP AND DEMONSTRATE AN IN-FURNACE MULTI-POLLUTANT REDUCTION TECHNOLOGY TO REDUCE NOx, SO2 & Hg

    SciTech Connect (OSTI)

    Allen C. Wiley; Steven Castagnero; Geoff Green; Kevin Davis; David White

    2004-03-01T23:59:59.000Z

    Semi-dense phase pneumatic delivery and injection of calcium and sodium sorbents, and microfine powdered coal, at various sidewall elevations of an online operating coal-fired power plant, was investigated for the express purpose of developing an in-furnace, economic multi-pollutant reduction methodology for NO{sub x}, SO{sub 2} & Hg. The 154 MWe tangentially-fired furnace that was selected for a full-scale demonstration, was recently retrofitted for NO{sub x} reduction with a high velocity rotating-opposed over-fire air system. The ROFA system, a Mobotec USA technology, has a proven track record of breaking up laminar flow along furnace walls, thereby enhancing the mix of all constituents of combustion. The knowledge gained from injecting sorbents and micronized coal into well mixed combustion gases with significant improvement in particulate retention time, should serve well the goals of an in-furnace multi-pollutant reduction technology; that of reducing back-end cleanup costs on a wide variety of pollutants, on a cost per ton basis, by first accomplishing significant in-furnace reductions of all pollutants.

  4. EV Everywhere Grand Challenge - Battery Status and Cost Reduction...

    Energy Savers [EERE]

    Status and Cost Reduction Prospects EV Everywhere Grand Challenge - Battery Status and Cost Reduction Prospects Presentation given by technology manager David Howell at the EV...

  5. Carbon Emissions Reduction Potential in the US Chemicals and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Carbon Emissions Reduction Potential in the US Chemicals and Pulp and Paper Industries by Applying CHP Technologies, June 1999 Carbon Emissions Reduction Potential in the US...

  6. The Economic Recovery Tax Act of 1981.

    E-Print Network [OSTI]

    Pena, Jose G.; Lovell, Ashley C.; Kensing, Robert H.

    1983-01-01T23:59:59.000Z

    The Texas A&M University System Texas Agricultural Extension Service Zerle L. Carpenter, Director College Station B-1456 The Economic Recovery Tax Act of 1981 Better Estate Plannin CONTENTS Increase in Unified Credit... .................................................................... 7 Repeal of Orphans' Exclusion ............................................................. 7 Delay in the Imposition of New Generation-Skipping Tax .................................... 7 Technical Changes in Special Use Valuation Provisions...

  7. The Quality Jobs Tax Credit (Georgia)

    Broader source: Energy.gov [DOE]

    The Quality Jobs Tax Credit provides a tax credit of $2,500-$5,000 per job, per year, for up to five year to companies that create at least 50 jobs in a twelve month period. Credits may be carried...

  8. Federal Gov Monthly state fuel tax examples

    E-Print Network [OSTI]

    NewYork Washington Florida Georgia Wyoming Arkansas Louisiana Texas NewMexico Oklahoma Alaska Freeway Texas New Mexico Oklahoma CentsperGallon How does Texas compare to other states? State Fuel Tax Rates.75 Texas Registration Fee Motor Fuel Lubricants Tax $43,275,000 Motor Vehicle Certificates of Title Fees

  9. Tax Seminar for Nonprofit and Exempt

    E-Print Network [OSTI]

    de Lijser, Peter

    program partner, participant, person, or entity. From the North: · Head south on CA57 S toward Exit 22D · Employment Taxes and Nonprofits · Property Tax Exemptions for Nonprofits · Regulation of Charities Invited from Nonprofit Experts on July 14 Sacramento ­ Nonprofit managers and others who have questions

  10. Technology Improvement Opportunities for Low Wind Speed Turbines and Implications for Cost of Energy Reduction: July 9, 2005 - July 8, 2006

    SciTech Connect (OSTI)

    Cohen, J.; Schweizer, T.; Laxson, A.; Butterfield, S.; Schreck, S.; Fingersh, L.; Veers, P.; Ashwill, T.

    2008-02-01T23:59:59.000Z

    This report analyzes the status of wind energy technology in 2002 and describes the potential for technology advancements to reduce the cost and increase the performance of wind turbines.

  11. Federal Tax Credits: 2010 and Beyond | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport inEnergy June 6-7, 2013 Meeting Federal RegisterCoal Technology |Federal Tax

  12. COMPARING ALASKA'S OIL PRODUCTION TAXES: INCENTIVES AND ASSUMPTIONS1

    E-Print Network [OSTI]

    Pantaleone, Jim

    context of Alaska oil production taxes, comparing MAPA and ACES to the original petroleum profits tax (PPT1 COMPARING ALASKA'S OIL PRODUCTION TAXES: INCENTIVES AND ASSUMPTIONS1 Matthew Berman In a recent analysis comparing the current oil production tax, More Alaska Production Act (MAPA, also known as SB 21

  13. Demand Reduction

    Broader source: Energy.gov [DOE]

    Grantees may use funds to coordinate with electricity supply companies and utilities to reduce energy demands on their power systems. These demand reduction programs are usually coordinated through...

  14. Tax aspects of collapsible corporations

    E-Print Network [OSTI]

    Lehmann, Herman August

    1960-01-01T23:59:59.000Z

    which do not represent accumulated earnings will be 25 per- cent of thc gain only if he neld his stock more than six months. 'ihis compares with the tax on ordinary income at rates which range from 20 4 percent to 91 percent for an individual... capi+al ~crease arising from unrealized appreciation. It is frequently referred to as a di~idend from revaluation "surplus. " A dividend from unrealized appreciation is frequently held to be legal ln the states in which the limitaticn as to d vidends...

  15. Welcome to GLACIER Tax Prep We hope you find GLACIER Tax Prep simple to use and easy to understand!

    E-Print Network [OSTI]

    Mullins, Dyche

    Welcome to GLACIER Tax Prep We hope you find GLACIER Tax Prep simple to use and easy to understand institution has licensed GLACIER Tax Prep (which replaces CINTAX) to assist you in this process. Following available BEFORE I login to GLACIER Tax Prep? ∑ Passport; ∑ Visa/Immigration Status information, including

  16. Hydraulic Wind Power Transfer Technology Afshin Izadian

    E-Print Network [OSTI]

    Zhou, Yaoqi

    Hydraulic Wind Power Transfer Technology Afshin Izadian Purdue School of Engineering and Technology of renewable energy tax credits in general and a gap in wind energy breakthroughs in particular have caused high cost of wind energy and technological dependency on countries such as China and Germany. Reducing

  17. CoolCab Truck Thermal Load Reduction

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    - On-board idle reduction technologies * Bergstrom battery electric AC * Airtronic diesel-fired heater * Objectives - Quantify truck cabin heat transfer - Identify potential...

  18. Capital gains tax treatment and the cattleman

    E-Print Network [OSTI]

    Rister, M. Edward

    1976-01-01T23:59:59.000Z

    Major Subject: Agricultural Economics CAPITAL GAINS TAX TREATMENT AND THE CATTLEMAN A Thesis by M I LTDN EDWARD R I STE R Approved as to style and content by: airman o ommi e Dr. Ronald R. Kay Head o D artment Dr. John opkin Mem er Dr. Donald... R. Levi e er Dr. Howard Hesby December 1976 ABSTRACT Capital Gains Tax Treatment and the Catt leman. (December 1976) Milton Edward Rister, B. S. , Texas ASM University Chairman of Advisory Committee: Or. Ronald D. Kay The federal tax...

  19. Tax Information Publication -2014 New Energy Star and WaterSense Products Sales Tax Holiday 1 2014 Sales Tax Holiday for

    E-Print Network [OSTI]

    Florida, University of

    ,599 for the second refrigerator are subject to tax. Installation Charges When a qualifying energy-efficient product

  20. Green Energy Manufacturing Tax Credit (Manitoba, Canada)

    Broader source: Energy.gov [DOE]

    This refundable income tax credit will be equal to 10% of the value of qualifying property produced in Manitoba and sold before 2019 for residential or commercial use in Manitoba.

  1. Commercial and Industrial Machinery Tax Exemption (Kansas)

    Broader source: Energy.gov [DOE]

    All commercial and industrial machinery and equipment acquired by qualified purchase or lease made or entered into after June 30, 2006 shall be exempt from property tax. All commercial and...

  2. Solar and CHP Sales Tax Exemption (Florida)

    Broader source: Energy.gov [DOE]

    Solar energy systems have been exempt from Florida's sales and use tax since July 1, 1997. The term "solar energy system" means the equipment and requisite hardware that provide and are used for...

  3. Exemption from Wholesale Energy Transaction Tax (Montana)

    Broader source: Energy.gov [DOE]

    Electricity from wind generation on state lands is exempt from the wholesale energy transaction tax of $0.00015/kWh transmitted. Electricity from any source, including renewables, that is generated...

  4. Tax credit for Resources (Quebec, Canada)

    Broader source: Energy.gov [DOE]

    This form is for an eligible corporation (and any member of a partnership that, if it were a corporation, be a qualified corporation company) who, for a taxation year, request a tax credit for...

  5. Major Business Facility Job Tax Credit (Virginia)

    Broader source: Energy.gov [DOE]

    The Major Business Facility Job Tax Credit is a program administered by the Virginia Department of Taxation. The credit provides $1,000 per job over a 25 or 50-job threshold, which varies by...

  6. Exemption from Electric Generation Tax (Connecticut)

    Broader source: Energy.gov [DOE]

    In 2011, Connecticut created a new tax requiring electric power plants in the state that generate and upload electricity to the regional bulk power grid to pay $2.50 per megawatt hour. Renewable...

  7. High Wage Jobs Tax Credit (New Mexico)

    Broader source: Energy.gov [DOE]

    A taxpayer who is an eligible employer may apply for and receive a tax credit for each new high-wage economic-based job. The credit amount equals 10% of the wages and benefits paid for each new...

  8. Large Commercial Wind Exemption and Alternative Taxes

    Broader source: Energy.gov [DOE]

    In South Dakota, wind farms constructed after July 1, 2007, are subject to an alternative taxation calculation in lieu of all taxes on real and personal property levied by the state, counties,...

  9. Property Tax Exemption for Residential Solar Systems

    Broader source: Energy.gov [DOE]

    [http://www.nmlegis.gov/Sessions/10%20Regular/final/HB0233.pdf HB 233 of 2010] exempted residential solar energy systems from property tax assessments. According to state law, for the purposes of...

  10. Renewable Energy Generation Zone Property Tax Abatement

    Broader source: Energy.gov [DOE]

    Local areas in Mimssouri can be designated as Renewable Energy Generation Zones and receive property tax abatements as part of the Enhanced Enterprise Zone program. Legislation (H.B. 737) enacted...

  11. Refundable Clean Heating Fuel Tax Credit (Corporate)

    Broader source: Energy.gov [DOE]

    The state of New York began offering a corporate income tax credit for biodiesel purchases used for residential space heating and water heating beginning in 2006. The original credit was authorized...

  12. Refundable Clean Heating Fuel Tax Credit (Personal)

    Broader source: Energy.gov [DOE]

    The state of New York began offering a personal income tax credit for biodiesel purchases used for residential space heating and water heating beginning in 2006. The original credit was authorized...

  13. Water Pollution Control Facilities, Tax exemption (Michigan)

    Broader source: Energy.gov [DOE]

    The Water Pollution Control Exemption, PA 451 of 1994, Part 37, as amended, affords a 100% property and sales tax exemption to facilities that are designed and operated primarily for the control,...

  14. Alternative Energy Investment Tax Credit (Corporate) | Department...

    Broader source: Energy.gov (indexed) [DOE]

    or equal to 5,000. Provider Montana Department of Revenue Commercial and net metering alternative energy investments of 5,000 or more are eligible for a tax credit of up to...

  15. Alternative Energy Investment Tax Credit (Personal) | Department...

    Broader source: Energy.gov (indexed) [DOE]

    or equal to 5,000. Provider Montana Department of Revenue Commercial and net metering alternative energy investments of 5,000 or more are eligible for a tax credit of up to...

  16. Biomass Producer or Collector Tax Credit (Oregon)

    Broader source: Energy.gov [DOE]

    †The Oregon Department of Energy provides a tax credit for agricultural producers or collectors of biomass. †The credit can be used for eligible biomass used to produce biofuel; biomass used in...

  17. Biomass Sales and Use Tax Exemption

    Broader source: Energy.gov [DOE]

    Georgia enacted legislation in April 2006 (HB 1018) creating an exemption for biomass materials from the state's sales and use taxes. The term "biomass material" is defined as "organic matter,...

  18. Qualified Target Industry Tax Refund (Florida)

    Broader source: Energy.gov [DOE]

    The Qualified Target Industry Tax Refund incentive is available for companies that create high wage jobs in targeted high value-added industries. The incentive refunds up to $3,000 per new full...

  19. Geothermal Heat Pump Tax Credit (Corporate)

    Broader source: Energy.gov [DOE]

    [http://www.emnrd.state.nm.us/ECMD/LawsRegulationsExecutiveOrders/documen... HB 375], signed in April 2009, created a tax credit in New Mexico for geothermal heat pumps purchased and installed...

  20. Geothermal Heat Pump Tax Credit (Personal)

    Broader source: Energy.gov [DOE]

    [http://www.emnrd.state.nm.us/ECMD/LawsRegulationsExecutiveOrders/documen... HB 375], signed in April 2009, created a tax credit in New Mexico for geothermal heat pumps purchased and installed...

  1. New or Expanding Industries Tax Credit (Montana)

    Broader source: Energy.gov [DOE]

    Under the New or Expanding Industries Tax Credit, property used by certain new or expanding industries is eligible for reduced taxable valuation (up to 50% of their taxable value for the first 5...

  2. Property Tax Exclusion for Solar Energy Systems

    Broader source: Energy.gov [DOE]

    Section 73 of the California Revenue and Taxation Code allows a property tax exclusion for certain types of solar energy systems installed between January 1, 1999, and December 31, 2016. This sec...

  3. Employment Tax Increment Financing Program (Maine)

    Broader source: Energy.gov [DOE]

    The Employment Tax Increment Financing Program assists business investment projects that create at least five new, high quality jobs within Maine. An approved business may be reimbursed 30, 50, or...

  4. Carbon Tax and Equity The importance

    E-Print Network [OSTI]

    Paris-Sud XI, Universitť de

    , the carbon tax came back on the French political agenda. However, the volatility of oil prices (Baranzini et al., 2000: 396), etc. These failed attempts doubtlessly have specific historical reasons

  5. Land Assemblage Tax Credit Program (Missouri)

    Broader source: Energy.gov [DOE]

    The Land Assemblage Tax Credit Programs the redevelopment of blighted areas in Missouri into productive use. Redevelopers must incur acquisition costs for at least 50 acres of 75+ acre parcels,...

  6. Tax Increment Financing (TIF) Guarantee Program (Pennsylvania)

    Broader source: Energy.gov [DOE]

    The Tax Increment Financing (TIF) Guarantee Program provides credit enhancement to improve market access and lower capital costs through loan guarantees to bond issuers to assist in the development...

  7. Incidence of Federal and State Gasoline Taxes

    E-Print Network [OSTI]

    Chouinard, Hayley; Perloff, Jeffrey M.

    2003-01-01T23:59:59.000Z

    valorem taxes to the retail gasoline price. These ad valoremwholesale and retail, unleaded gasoline price equations. Wegasoline, Journal of Economic Issues 9, 409-414. Table 1: Retail and Wholesale Reduced-Form Price

  8. Variable-Rate State Gasoline Taxes

    E-Print Network [OSTI]

    Ang-Olson, Jeffrey; Wachs, Martin; Taylor, Brian D.

    1999-01-01T23:59:59.000Z

    1986, the average retail gasoline price dropped from $1.17Figure 4 Average US Retail Gasoline Price (excluding taxes)of the average retail price of gasoline, with a 4.0 cent per

  9. Sales Tax Exemption for Hydrogen Fuel Cells

    Broader source: Energy.gov [DOE]

    A sales tax exemption may also be taken on building materials used to construct a new or renovated building or purchases of machinery for a research district. A research district is defined as...

  10. Small Business Job Creation Tax Credit (Illinois)

    Broader source: Energy.gov [DOE]

    The Illinois Small Business Jobs Creation Tax Credit program provides small business owners and non-profits with an extra boost to grow their business over the next four years. After creating one...

  11. Bio-Heating Oil Tax Credit (Personal)

    Broader source: Energy.gov [DOE]

    Maryland allows individuals and corporations to take an income tax credit of $0.03/gallon for purchases of biodiesel used for space heating or water heating. The maximum credit is $500 per year. It...

  12. UNEP Collaborating Centre on Energy and Environment Renewable Energy Technologies

    E-Print Network [OSTI]

    of the total primary energy use in 2100 - WEC scenarios. (82% - phasing out most fossil fuel and CO2 below 450 costs, taxes (local and import), subsidies and energy prices Technical Lack of access to the technology

  13. Innovative clean coal technology: 500 MW demonstration of advanced wall-fired combustion techniques for the reduction of nitrogen oxide (NOx) emissions from coal-fired boilers. Final report, Phases 1 - 3B

    SciTech Connect (OSTI)

    NONE

    1998-01-01T23:59:59.000Z

    This report presents the results of a U.S. Department of Energy (DOE) Innovative Clean Coal Technology (ICCT) project demonstrating advanced wall-fired combustion techniques for the reduction of nitrogen oxide (NOx) emissions from coal-fired boilers. The project was conducted at Georgia Power Company`s Plant Hammond Unit 4 located near Rome, Georgia. The technologies demonstrated at this site include Foster Wheeler Energy Corporation`s advanced overfire air system and Controlled Flow/Split Flame low NOx burner. The primary objective of the demonstration at Hammond Unit 4 was to determine the long-term effects of commercially available wall-fired low NOx combustion technologies on NOx emissions and boiler performance. Short-term tests of each technology were also performed to provide engineering information about emissions and performance trends. A target of achieving fifty percent NOx reduction using combustion modifications was established for the project. Short-term and long-term baseline testing was conducted in an {open_quotes}as-found{close_quotes} condition from November 1989 through March 1990. Following retrofit of the AOFA system during a four-week outage in spring 1990, the AOFA configuration was tested from August 1990 through March 1991. The FWEC CF/SF low NOx burners were then installed during a seven-week outage starting on March 8, 1991 and continuing to May 5, 1991. Following optimization of the LNBs and ancillary combustion equipment by FWEC personnel, LNB testing commenced during July 1991 and continued until January 1992. Testing in the LNB+AOFA configuration was completed during August 1993. This report provides documentation on the design criteria used in the performance of this project as it pertains to the scope involved with the low NOx burners and advanced overfire systems.

  14. Bulk Electricity Generating Technologies This appendix describes the technical characteristics and cost and performance

    E-Print Network [OSTI]

    income tax rate n/a 35% 35% Federal investment tax credit n/a 0% 0% Tax recovery period n/a 20 years 20-FIRED STEAM-ELECTRIC PLANTS Coal-fired steam-electric power plants are a mature technology, in use for over a century. Coal is the largest source of electric power in the United States as a whole, and the second

  15. Anne Arundel County- High Performance Dwelling Property Tax Credit

    Broader source: Energy.gov [DOE]

    The state of Maryland permits local governments (Md Code: Property Tax ß 9-242) to offer property tax credits for high performance buildings if they choose to do so. In October 2010 Anne Arundel...

  16. Investment in Energy Infrastructure and the Tax Code

    E-Print Network [OSTI]

    Metcalf, Gilbert E.

    Federal tax policy provides a broad array of incentives for energy investment. I review those policies and construct estimates of marginal effective tax rates for different energy capital investments as of 2007. Effective ...

  17. West Virginia Property Tax Briefing Paper Amy Higginbotham

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    West Virginia Property Tax Briefing Paper By Amy Higginbotham Arzu Sen Dr. Tami Gurley-Calvez Bureau of Business and Economic Research College of Business and Economics West Virginia University 2009 ...........................................................................................................................1 History of the West Virginia Property Tax

  18. Economic Development for a Growing Economy Tax Credit Program (Illinois)

    Broader source: Energy.gov [DOE]

    The Economic Development for a Growing Economy Tax Credit Program encourages companies to remain, expand, or locate in Illinois. The program provides tax credits to qualifying companies equal to...

  19. Economic Development for a Growing Economy Tax Credit (Indiana)

    Broader source: Energy.gov [DOE]

    The Economic Development for a Growing Economy Tax Credit is awarded to businesses with projects that result in net new jobs. The tax credit must be a major factor in the companyís decision to move...

  20. Sales Tax Holiday for Energy-Efficient Appliances

    Broader source: Energy.gov [DOE]

    The state of Missouri offers consumers a seven-day ''exemption from state sales taxes'' on certain Energy Star certified new appliances. The state sales tax holiday, known as the "Show-Me Green...

  1. Alternative Energy Investment Tax Credit | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Amount 35% tax credit Provider Montana Department of Revenue Commercial and net metering alternative energy investments of 5,000 or more are eligible for a tax credit of up to...

  2. Baltimore County- Property Tax Credit for Solar and Geothermal Devices

    Broader source: Energy.gov [DOE]

    The state of Maryland permits local governments (Md Code: Property Tax ß 9-203) to offer property tax credits for energy conservation devices if they choose to do so. In November 2010 Baltimore C...

  3. Urban and Industrial Sites Reinvestment Tax Credit Program (Connecticut)

    Broader source: Energy.gov [DOE]

    The Urban and Industrial Sites Reinvestment Tax Credit Program provides up to $100 million in tax credits over a ten-year period to support projects that create jobs and capital investment in under...

  4. Tax Deduction for Home Energy Audits and Energy Efficiency Improvements

    Broader source: Energy.gov [DOE]

    In July 2008, Missouri enacted legislation allowing homeowners to take an income tax deduction of the cost of home energy audits and associated energy efficiency improvements. The tax deduction is...

  5. Climate Change Taxes and Energy Efficiency in Japan

    E-Print Network [OSTI]

    Kasahara, Satoru.

    In 2003 Japan proposed a Climate Change Tax to reduce its CO2 emissions to the level required by the Kyoto Protocol. If implemented, the tax would be levied on fossil fuel use and the revenue distributed to several sectors ...

  6. The Rural Opportunity Initiative Enhanced Job Tax Credit (Tennessee)

    Broader source: Energy.gov [DOE]

    The Rural Opportunity Initiative Enhanced Job Tax Credit program provides enhanced job tax credits to businesses locating or expanding in certain Tennessee counties considered Tier 2 or Tier 3...

  7. Tax effects upon oil field development in Venezuela

    E-Print Network [OSTI]

    Manzano, Osmel

    2000-01-01T23:59:59.000Z

    Important reforms have been made to the oil sector tax code in Venezuela. Given its diversity of oil resources, there was a concern that some resources were not being exploited because of the structure of the tax code. ...

  8. Tax Incentives for Residential Buildings | Department of Energy

    Energy Savers [EERE]

    Improvements made in 2008 are not eligible for a tax credit. See the ENERGY STAR Web site for a detailed listing of eligible improvements. Renewable Energy Tax Credits for...

  9. City of Houston- Property Tax Abatement for Green Buildings

    Broader source: Energy.gov [DOE]

    In September 2009, Houston enacted Ordinance No. 2009-858, the City of Houston Tax Abatement Program, which establishes a partial tax abatement for commercial buildings that meet LEED standards. A ...

  10. Sales and Use Tax Exemption for Electrical Generating Equipment

    Broader source: Energy.gov [DOE]

    Indiana does not have a specific sales and use tax exemption for equipment used in the production of renewable electricity. Therefore, such equipment is presumed to be subject to sales and use tax....

  11. Montgomery County- High Performance Building Property Tax Credit

    Broader source: Energy.gov [DOE]

    The state of Maryland permits local governments (Md Code: Property Tax ß 9-242) to offer property tax credits for high performance buildings if they choose to do so. Montgomery County has...

  12. Woody Biomass Harvesting and Processing Tax Credit (Personal)

    Broader source: Energy.gov [DOE]

    In May 2010, Wisconsin enacted legislation allowing taxpayers to claim a tax credit from income or franchise taxes of 10% of the cost of equipment primarily used to harvest or process woody biomass...

  13. Tax Credits for Home Energy Improvements (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2011-08-01T23:59:59.000Z

    This fact sheet is an overview of the Department of Energy's tax credits for home energy improvements.

  14. Tax Deduction Qualified Software Tas version 9.3.1

    Broader source: Energy.gov [DOE]

    Information about the Tas version 9.3.1 qualified computer software and federal tax incentive requirements for commercial buildings.

  15. Energy-Saving Melting and Revert Reduction Technology (E-SMARRT): Lost Foam Thin Wall - Feasibility of Producing Lost Foam Castings in Aluminum and Magnesium Based Alloys

    SciTech Connect (OSTI)

    Fasoyinu, Yemi [CanmetMATERIALS] [CanmetMATERIALS; Griffin, John A. [University of Alabama - Birmingham] [University of Alabama - Birmingham

    2014-03-31T23:59:59.000Z

    With the increased emphasis on vehicle weight reduction, production of near-net shape components by lost foam casting will make significant inroad into the next-generation of engineering component designs. The lost foam casting process is a cost effective method for producing complex castings using an expandable polystyrene pattern and un-bonded sand. The use of un-bonded molding media in the lost foam process will impose less constraint on the solidifying casting, making hot tearing less prevalent. This is especially true in Al-Mg and Al-Cu alloy systems that are prone to hot tearing when poured in rigid molds partially due to their long freezing range. Some of the unique advantages of using the lost foam casting process are closer dimensional tolerance, higher casting yield, and the elimination of sand cores and binders. Most of the aluminum alloys poured using the lost foam process are based on the Al-Si system. Very limited research work has been performed with Al-Mg and Al-Cu type alloys. With the increased emphasis on vehicle weight reduction, and given the high-strength-to-weight-ratio of magnesium, significant weight savings can be achieved by casting thin-wall (? 3 mm) engineering components from both aluminum- and magnesium-base alloys.

  16. Tax Reform in the 21st Alan J. Auerbach*

    E-Print Network [OSTI]

    Sadoulet, Elisabeth

    Tax Reform in the 21st Century Alan J. Auerbach* University of California, Berkeley, and NBER May 6 for a conference, "Is it Time for Fundamental Tax Reform?" held at the James A. Baker III Institute at Rice a major reform to make its tax system simpler, fairer and more efficient? In addressing this question, I

  17. Overview of State Programs, Incentives & Tax Credits for Business

    E-Print Network [OSTI]

    manufacturer classification (or R&D company) from DOR ∑ Web site: www.mass.gov/dor #12;Tax Incentives Economic Development Incentive Program ∑ The Economic Development Incentive Program (EDIP) is the primary economic-100) of added value Tax Incentives #12;Tax Incentives Economic Development Incentive Program ∑ Negotiated

  18. Australia's Carbon Cap-and-Tax Fiasco 24 July 2014

    E-Print Network [OSTI]

    Hansen, James E.

    Australia's Carbon Cap-and-Tax Fiasco 24 July 2014 James Hansen I have been fortunate to be able policies. I usually focus on fee-and-dividend, the non-tax way to put a rising price on carbon in a way as a cap-and-tax. Australia is now the largest carbon polluter per capita among major nations (see Figure 1

  19. New Evidence on Taxes and Portfolio Choices

    E-Print Network [OSTI]

    Alan, Sule; Atalay, Kadir; Crossley, Thomas F; Jeon, Sung-Hee

    ) Savings bonds e) Mortgage-backed bonds f) Corporate Bonds g) Foreign Bonds h) Cash or call money accounts i)T-bills j)government bond funds and other bond funds a) Stock mutual funds b)Stocks c)trusts d)Tax-free Money market funds e) Tax... ), pensions and taxable government transfers.6 For the placebo tests we use two major American data sets; the Survey of Consumer Finance, SCF (1998) and the Panel study of Income Dynamics, PSID (1999). The SCF is a triennial survey that collects information...

  20. Determination of vapor-liquid equilibrium data and decontamination factors needed for the development of evaporator technology for use in volume reduction of radioactive waste streams

    SciTech Connect (OSTI)

    Betts, S.E. [California Univ., Santa Barbara, CA (United States)

    1993-10-01T23:59:59.000Z

    A program is currently in progress at Argonne National Laboratory to evaluate and develop evaporator technology for concentrating radioactive waste streams. By concentrating radioactive waste streams, disposal costs can be significantly reduced. To effectively reduce the volume of waste, the evaporator must achieve high decontamination factors so that the distillate is sufficiently free of radioactive material. One technology that shows a great deal of potential for this application is being developed by LICON, Inc. In this program, Argonne plans to apply LICON`s evaporator designs to the processing of radioactive solutions. Concepts that need to be incorporated into the design of the evaporator include, criticality safety, remote operation and maintenance, and materials of construction. To design an effective process for concentrating waste streams, both solubility and vapor-liquid equilibrium data are needed. The key issue, however, is the high decontamination factors that have been demonstrated by this equipment. Two major contributions were made to this project. First, a literature survey was completed to obtain available solubility and vapor-liquid equilibrium data. Some vapor-liquid data necessary for the project but not available in the literature was obtained experimentally. Second, the decontamination factor for the evaporator was determined using neutron activation analysis (NAA).

  1. Sales Tax Exemption for Energy-Efficient Products (Sales Tax Holiday)

    Broader source: Energy.gov [DOE]

    Virginia allows a four-day sales tax exemption on Energy Star products of $2,500 or less per product, purchased for non-commercial home or personal use. Beginning in 2007, the 100% exemption from...

  2. Sales Tax Exemption for Energy-Efficient Products (Sales Tax Holiday) (Georgia))

    Broader source: Energy.gov [DOE]

    Georgia allows an annual state and local sales tax exemption on Energy Star products of $1,500 or less per product, purchased for non-commercial home or personal use.The 100% exemption from the...

  3. Earnings Determination and Taxes: Evidence from a Cohort-Based Payroll Tax Reform in Greece

    E-Print Network [OSTI]

    Saez, Emmanuel; Matsaganis, Manos; Tsakloglou, Panos

    2010-01-01T23:59:59.000Z

    pension outcomes i n Greece." British Jour¨ nal ofIndustrialL T A X R E F O R M IN GREECE Emmanuel Saez Manos MatsaganisBased Payroll Tax Reform in Greece Emmanuel Saez, Manos

  4. 2004 INDEX OF INNOVATION AND TECHNOLOGY TRI-CITIES, WASHINGTON

    E-Print Network [OSTI]

    such as traffic congestion and high cost of living o Has two factors impeding its technology-based economic Tax Burden 14 Labor Costs 15 Growth 16 Employment in Technology Firms 17 Growth in Startups 172004 INDEX OF INNOVATION AND TECHNOLOGY TRI-CITIES, WASHINGTON JULY 2004 #12;PNNL-SA-42092 2004

  5. TRI-CITIES, WASHINGTON INNOVATION AND TECHNOLOGY INDEX

    E-Print Network [OSTI]

    of growth such as traffic congestion and high cost of living o Has two factors impeding its technology Government Services and Functions 12 Tax Burden 13 Labor Costs 14 Growth 15 Employment in Technology Firms 16. Nurturing technology firms is thought to be a more cost-effective way of reaching development goals

  6. Tax Policy and Food Security Pawan Gopalakrishnany

    E-Print Network [OSTI]

    Bandyopadhyay, Antar

    Tax Policy and Food Security Pawan Gopalakrishnany Anuradha Sahaz September 17, 2014 Abstract We regime. Keywords : Endogenous Growth, Fiscal Policy, Food Security, Welfare JEL Codes: E2, E62, H29, O00 Economics and Planning Unit, Indian Statistical Institute, New Delhi ­ 110016, India. Tel: 91-11- 27568306

  7. Tax CarbonEnhancing environmental quality

    E-Print Network [OSTI]

    Paulsson, Johan

    . Jorgenson has also studied economic growth, energy utilization, and envi- ronmental quality in China of 36 billion metric tons. As the no doubt fraught scientific and political discussion in the French economic growth, the relationship between energy and the environment, and the effects of tax policy on both

  8. Carbon Trading, Carbon Taxes and Social Discounting

    E-Print Network [OSTI]

    Weiblen, George D

    Carbon Trading, Carbon Taxes and Social Discounting Elisa Belfiori belf0018@umn.edu University of Minnesota Abstract This paper considers the optimal design of policies to carbon emissions in an economy, such as price or quantity controls on the net emissions of carbon, are insufficient to achieve the social

  9. Property Tax Fee-In-Lieu (Mississippi)

    Broader source: Energy.gov [DOE]

    The Property Tax Fee-In-Lieu allows for new or expansion projects in the state that have a private capital investment in excess of $100,000,000, a negotiated fee can be set that is paid in place of...

  10. Demonstration of selective catalytic reduction (SCR) technology for the control of nitrogen oxide (NO{sub x}) emissions from high-sulfur coal-fired boilers. Quarterly report No. 4, April--June 1991

    SciTech Connect (OSTI)

    Not Available

    1991-08-01T23:59:59.000Z

    The objective of this project is to demonstrate and evaluate commercially available Selective Catalytic Reduction (SCR) catalysts from US, Japanese and European catalyst suppliers on a high-sulfur US coal-fired boiler. SCR is a post-combustion nitrogen oxide (NOx) control technology that involves injecting ammonia into the flue gas generated from coal combustion in an electric utility boiler. The flue gas containing ammonia is then passed through a reactor that contains a specialized catalyst. In the presence of the catalyst, the ammonia reacts with NOx to convert it to nitrogen and water vapor, Although SCR is widely practiced in Japan and Europe, there are numerous technical uncertainties associated with applying SCR to US coals. These uncertainties include: (1) potential catalyst deactivation due to poisoning by trace metal species present in US coals that are not present in other fuel performance of the technology and effects on the balance-of-plant equipment in the presence of high amounts of SO{sub 2} and SO{sub 3}. (3) performance of a wide variety of SCR catalyst compositions, geometries and methods of manufacture under typical high-sulfur coal-fired utility operating conditions. These uncertainties will be explored by constructing a series of small-scale SCR reactors and simultaneously exposing different SCR catalysts to flue gas derived from the combustion of high sulfur US coal.

  11. Energy Saving Melting and Revert Reduction Technology (Energy-SMARRT): Surface/Near Surface Indication - Characterization of Surface Anomalies from Magnetic Particle and Liquid Penetrant Indications

    SciTech Connect (OSTI)

    Griffin, John [university of Alabama - Birmingham] [university of Alabama - Birmingham

    2014-02-20T23:59:59.000Z

    The systematic study and characterization of surface indications has never been conducted. Producers and users of castings do not have any data on which they can reliably communicate the nature of these indications or their effect on the performance of parts. Clearly, the ultimate intent of any work in this area is to eliminate indications that do in fact degrade properties. However, it may be impractical physically and/or financially to eliminate all surface imperfections. This project focused on the ones that actually degrade properties. The initial work was to identify those that degrade properties. Accurate numerical simulations of casting service performance allow designers to use the geometric flexibility of castings and the superior properties of steel to produce lighter weight and more energy efficient components for transportation systems (cars and trucks), construction, and mining. Accurate simulations increase the net melting energy efficiency by improving casting yield and reducing rework and scrap. Conservatively assuming a 10% improvement in yield, approximately 1.33 x 1012 BTU/year can be saved with this technology. In addition, CO2 emissions will be reduced by approximately 117,050 tons per year.

  12. Application of plasma shield technology to the reduction, treatment, and disposal of hazardous organic and/or mixed wastes with actinide recovery

    SciTech Connect (OSTI)

    Adams, B.T.; Vaughan, L.L.; Joyce, E.L. Jr.; Bieniewski, T.M.

    1990-01-01T23:59:59.000Z

    Los Alamos research activities are currently directed at the application of the shielded hydrogen plasma torch to the direct production of actinide metals from a UF{sub 6} feedstock. Two broad classes of thermal plasma reactors are currently in widespread use: the direct current (dc) arc jet system and the radio frequency (rf) inductively coupled system. Los Alamos has improved upon the basic rf plasma tube design using the concept of a transformer. The unique feature of the Los Alamos tube is a segmented, cooled, internal radiation shield. The Los Alamos shielded plasma torch routinely achieves temperatures exceeding 10,000 K and electron densities of 10{sup 16}/cm{sup 3} when operated continuously at one atmosphere of argon. These highly energetic conditions are sufficient to dissociate most chemical compounds into their constituent atoms. Based upon these characteristics, Los Alamos is currently investigating the application of the shielded plasma torch technology to the destruction of organic and mixed hazardous wastes, as well as the direct production of actinide metals from the halides and oxides, without the cogeneration of contaminated wastes. 5 refs., 4 figs.

  13. Innovative Clean Coal Technology (ICCT): 180 MW demonstration of advanced tangentially-fired combustion techniques for the reduction of nitrogen oxide (NO{sub x}) emissions from coal-fired boilers. Topical report, LNCFS Levels 1 and 3 test results

    SciTech Connect (OSTI)

    Not Available

    1993-08-17T23:59:59.000Z

    This report presents results from the third phase of an Innovative Clean Coal Technology (ICC-1) project demonstrating advanced tangentially-fired combustion techniques for the reduction of nitrogen oxide (NO{sub x}) emissions from a coal-fired boiler. The purpose of this project was to study the NO{sub x} emissions characteristics of ABB Combustion Engineering`s (ABB CE) Low NO{sub x} Concentric Firing System (LNCFS) Levels I, II, and III. These technologies were installed and tested in a stepwise fashion at Gulf Power Company`s Plant Lansing Smith Unit 2. The objective of this report is to provide the results from Phase III. During that phase, Levels I and III of the ABB C-E Services Low NO{sub x} Concentric Firing System were tested. The LNCFS Level III technology includes separated overfire air, close coupled overfire air, clustered coal nozzles, flame attachment coal nozzle tips, and concentric firing. The LNCFS Level I was simulated by closing the separated overfire air nozzles of the LNCFS Level III system. Based upon long-term data, LNCFS Level HI reduced NO{sub x} emissions by 45 percent at full load. LOI levels with LNCFS Level III increased slightly, however, tests showed that LOI levels with LNCFS Level III were highly dependent upon coal fineness. After correcting for leakage air through the separated overfire air system, the simulated LNCFS Level I reduced NO{sub x} emissions by 37 percent. There was no increase in LOI with LNCFS Level I.

  14. ECONOMIC POLICY The State's Tax

    E-Print Network [OSTI]

    Falge, Eva

    working to develop new materials for solar cells and fuel cells; they are at- tempting to reproduce Magnets ≠ Made by Microbes ANTHROPOLOGY Meet the Neanderthals Sources we will draw on in the future FOCUS for Factory Operation and Automation and Ceramic Technologies and Systems to develop a new generation of fuel

  15. Information technology and innovative drainage management practices for selenium load reduction from irrigated agriculture to provide stakeholder assurances and meet contaminant mass loading policy objectives

    SciTech Connect (OSTI)

    Quinn, N.W.T.

    2009-10-15T23:59:59.000Z

    Many perceive the implementation of environmental regulatory policy, especially concerning non-point source pollution from irrigated agriculture, as being less efficient in the United States than in many other countries. This is partly a result of the stakeholder involvement process but is also a reflection of the inability to make effective use of Environmental Decision Support Systems (EDSS) to facilitate technical information exchange with stakeholders and to provide a forum for innovative ideas for controlling non-point source pollutant loading. This paper describes one of the success stories where a standardized Environmental Protection Agency (EPA) methodology was modified to better suit regulation of a trace element in agricultural subsurface drainage and information technology was developed to help guide stakeholders, provide assurances to the public and encourage innovation while improving compliance with State water quality objectives. The geographic focus of the paper is the western San Joaquin Valley where, in 1985, evapoconcentration of selenium in agricultural subsurface drainage water, diverted into large ponds within a federal wildlife refuge, caused teratogenecity in waterfowl embryos and in other sensitive wildlife species. The fallout from this environmental disaster was a concerted attempt by State and Federal water agencies to regulate non-point source loads of the trace element selenium. The complexity of selenium hydrogeochemistry, the difficulty and expense of selenium concentration monitoring and political discord between agricultural and environmental interests created challenges to the regulation process. Innovative policy and institutional constructs, supported by environmental monitoring and the web-based data management and dissemination systems, provided essential decision support, created opportunities for adaptive management and ultimately contributed to project success. The paper provides a retrospective on the contentious planning process and offers suggestions as to how the technical and institutional issues could have been resolved faster through early adoption of some of the core principles of sound EDSS design.

  16. Fact #724: April 23, 2012 Gas Guzzler Tax Levied on New Cars...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4: April 23, 2012 Gas Guzzler Tax Levied on New Cars with Low Fuel Economy Fact 724: April 23, 2012 Gas Guzzler Tax Levied on New Cars with Low Fuel Economy The "Gas Guzzler Tax"...

  17. SUBSIDIZING SOLAR ENERGY: THE ROLE OF TAX CREDITS, LOANS, AND WARRANTIES

    E-Print Network [OSTI]

    Berman, S. M.

    2011-01-01T23:59:59.000Z

    Division Subsidizing Solar Energy: The Role Of Tax Credits,48 W o SUBSIDIZING SOLAR ENERGY: The Role of Tax Credits,Energy. SUBSIDIZING SOLAR ENERGY: The Role of Tax Credits,

  18. Gross Receipts Tax Exemption for Sales of Wind and Solar Systems to Government Entities

    Broader source: Energy.gov [DOE]

    New Mexico has a gross receipts tax structure for businesses instead of a sales tax. Businesses are taxed on the gross amount of their business receipts each year before expenses are deducted. ...

  19. The effects of hazardous waste taxes on generation and disposal of chlorinated solvent waste

    E-Print Network [OSTI]

    Sigman, Hilary

    1992-01-01T23:59:59.000Z

    In 1989, 30 states levied taxes on e generation or management of hazardous waste. These taxes constitute one of the broadest applications of an emissions tax in U.S. environmental policy and provide a natural experiment ...

  20. Partial Sales and Use Tax Exemption for Agricultural Solar Power Facilities (California)

    Broader source: Energy.gov [DOE]

    California provides a partial exemption of the state's sales and use tax for farm equipment and machinery. The exemption only applies to taxes levied by the State, and not sales and use taxes...

  1. Taxes, Permits, and the Adoption of Abatement Technology under Imperfect

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit with formSoutheastern ILSunseekerTallahatchie Valley ETaurus Progetto Sole

  2. Practical Issues when Selecting PV Technologies (Presentation)

    SciTech Connect (OSTI)

    Kurtz, S.

    2010-09-09T23:59:59.000Z

    Presentation highlighting practical considerations for photovoltaic technologies and strategies for future reductions in cost and increases in efficiency.

  3. Unconventional Resources Technology Advisory Committee | Department...

    Energy Savers [EERE]

    and environmental mitigation (including reduction of greenhouse gas emissions and sequestration of carbon). The Department's Unconventional Resources Technology Advisory...

  4. Technology and Greenhouse Gas Emissions: An IntegratedScenario Analysis

    SciTech Connect (OSTI)

    Koomey, J.G.; Latiner, S.; Markel, R.J.; Marnay, C.; Richey, R.C.

    1998-09-01T23:59:59.000Z

    This report describes an analysis of possible technology-based scenarios for the U.S. energy system that would result in both carbon savings and net economic benefits. We use a modified version of the Energy Information Administration's National Energy Modeling System (LBNL-NEMS) to assess the potential energy, carbon, and bill savings from a portfolio of carbon saving options. This analysis is based on technology resource potentials estimated in previous bottom-up studies, but it uses the integrated LBNL-NEMS framework to assess interactions and synergies among these options. The analysis in this paper builds on previous estimates of possible "technology paths" to investigate four major components of an aggressive greenhouse gas reduction strategy: (1) the large scale implementation of demand-side efficiency, comparable in scale to that presented in two recent policy studies on this topic; (2) a variety of "alternative" electricity supply-side options, including biomass cofiring, extension of the renewable production tax credit for wind, increased industrial cogeneration, and hydropower refurbishment. (3) the economic retirement of older and less efficient existing fossil-find power plants; and (4) a permit charge of $23 per metric ton of carbon (1996 $/t),l assuming that carbon trading is implemented in the US, and that the carbon permit charge equilibrates at this level. This level of carbon permit charge, as discussed later in the report, is in the likely range for the Clinton Administration's position on this topic.

  5. 500 MW demonstration of advanced wall-fired combustion techniques for the reduction of nitrogen oxide (NO{sub x}) emissions from coal-fired boilers. Third quarterly progress report, 1992: Innovative Clean Coal Technology (ICCT)

    SciTech Connect (OSTI)

    Not Available

    1992-12-31T23:59:59.000Z

    The project provides a stepwise retrofit of an advanced overfire air (AOFA) system followed by low NO{sub x} burners (LNB). During each test phase of the project, diagnostic, performance, long-term, and verification testing will be performed. These tests are used to quantify the NO{sub x} reductions of each technology and evaluate the effects of those reductions on other combustion parameters such as particulatecharacteristics and boiler efficiency. Baseline, AOFA, and LNB without AOFA test segments have been completed. Analysis of the 94 days of LNB long-term data collected show the full-load NO{sub x} emission levels to be approximately 0.65 lb/MBtu. Flyash LOI values for the LNB configuration are approximately 8 percent at full-load. Corresponding values for the AOFA configuration are 0.94 lb/MBtu and approximately 10 percent. Abbreviated diagnostic tests for the LNB+AOFA configuration indicate that at 500 MWe, NO{sub x} emissions are approximately 0.55 lb/MBtu with corresponding flyash LOI values of approximately 11 percent. For comparison, the long-term full-load, baseline NO{sub x} emission level was approximately 1.24 lb/MBtu at 5.2 percent LOI. Comprehensive testing of the LNB+AOFA configuration will be performed when the stackparticulate emissions issue is resolved. Testing of a process optimization package on Plant Hammond Unit 4 was performed during this quarter. The software was configured to minimize NO{sub x} emissions using total combustion air flow and advanced overfire air distribution as the controlled parameters. Preliminary results from this testing indicate that this package shows promise in reducing NO{sub x} emissions while maintaining or improving other boiler performance parameters.

  6. Advanced Energy Gross Receipts Tax Deduction | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    Photovoltaics Maximum Rebate 60 million Program Info Start Date 712010 State New Mexico Program Type Sales Tax Incentive Rebate Amount 100% of gross receipts from sale and...

  7. Sales and Use Tax Exemption for Gas Processing Facilities

    Broader source: Energy.gov [DOE]

    In North Dakota, materials purchased for building or expending gas processing facilities are exempt from sales and use taxes. Building materials, equipment, and other tangible property are eligible...

  8. Advanced Energy Tax Credit (Corporate) | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    the development and construction costs of solar thermal electric plants and associated energy storage devices are eligible for a 6% tax credit against gross receipts, compensating,...

  9. Energy Conservation Tax Credits- Competitively-Selected Projects (Corporate)

    Broader source: Energy.gov [DOE]

    The Oregon Department of Energy periodically releases Opportunity Announcements for tax credits for energy conservation projects. Energy conservation projects include projects with investments for...

  10. Energy Conservation Tax Credits- Small Premium Projects (Corporate)

    Broader source: Energy.gov [DOE]

    The Oregon Department of Energy periodically releases Opportunity Announcements for tax credits for energy conservation projects. Energy conservation projects include projects with investments for...

  11. Energy Department Announces $150 Million in Tax Credits to Invest...

    Broader source: Energy.gov (indexed) [DOE]

    clean energy innovation, and the tax credits announced today will help reduce carbon pollution from our vehicles and buildings; create new jobs and supply more clean energy...

  12. New Generation Cooperative Incentive Tax Credit Program (Missouri)

    Broader source: Energy.gov [DOE]

    The Missouri Agricultural and Small Business Development Authority provides New Generation Cooperative Incentive Tax Credits to induce producer member investment into new generation processing...

  13. Puerto Rico- Sales and Use Tax Exemption for Green Energy

    Broader source: Energy.gov [DOE]

    Puerto Rican law exempts from the sales and use tax solar electric equipment, associated accessories, and components used to produce electrical energy. Distributors or manufacturers must submit a...

  14. Sales Tax Holiday for Energy-Efficient Appliances

    Broader source: Energy.gov [DOE]

    In November 2007, Maryland enacted legislation creating a sales and use tax "holiday" for certain energy-efficient appliances, beginning in 2011. Under the law, qualifying appliances purchased...

  15. Economic impact of tax-based federal student aid

    E-Print Network [OSTI]

    Turner, Nicholas Peter

    2010-01-01T23:59:59.000Z

    Informational Paper 4. Szilagyi, John. 1991. ďWhere Some ofof third party verification (Szilagyi 1991; Jeffrey Liebmaneffects on tax compliance (Szilagyi 1991; Jeffrey Liebman

  16. Prince George's County- Solar and Geothermal Residential Property Tax Credit

    Broader source: Energy.gov [DOE]

    In 2008 Prince George's County enacted legislation offering a property tax credit on residential structures equipped with solar and geothermal systems. As originally devised, the credit could only...

  17. Tax Credits Give Thin-Film Solar a Big Boost

    Broader source: Energy.gov [DOE]

    California company will expand its capacity to make its thin-film solar panels by more than ten times, thanks to two Recovery Act tax credits.

  18. Energy Conservation Tax Credits- Competitively-Selected Projects (Personal)

    Broader source: Energy.gov [DOE]

    The Oregon Department of Energy periodically releases Opportunity Announcements for tax credits for energy conservation projects. Energy conservation projects include projects with investments for...

  19. Energy Conservation Tax Credits- Small Premium Projects (Personal)

    Broader source: Energy.gov [DOE]

    The Oregon Department of Energy periodically releases Opportunity Announcements for tax credits for energy conservation projects. Energy conservation projects include projects with investments for...

  20. Municipal Waste Planning, Recycling and Waste Reduction Act ...

    Open Energy Info (EERE)

    Recycling and Waste Reduction Act (Pennsylvania) Policy Category Other Policy Policy Type Environmental Regulations Affected Technologies BiomassBiogas, Coal with CCS,...

  1. Efficiency Improvement through Reduction in Friction and Wear...

    Energy Savers [EERE]

    More Documents & Publications Heavy Truck Friction & Wear Reduction Technologies Development of High Power Density Driveline for Vehicles Low-Friction Engineered Surfaces...

  2. Enhanced High and Low Temperature Performance of NOx Reduction...

    Energy Savers [EERE]

    High and Low Temperature Performance of NOx Reduction Materials 2013 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer...

  3. Bridging the Divide Between Poverty Reduction and Climate Change...

    Open Energy Info (EERE)

    Bridging the Divide Between Poverty Reduction and Climate Change Through Sustainable and Innovative Energy Technologies Jump to: navigation, search Tool Summary LAUNCH TOOL Name:...

  4. Demonstration of Selective Catalytic Reduction (SCR) technology for the control of nitrogen oxide (NO{sub x}) emissions from high-sulfur coal-fired boilers. Technical progress report, first and second quarters 1994

    SciTech Connect (OSTI)

    NONE

    1995-11-01T23:59:59.000Z

    The objective of this project is to demonstrate and evaluate commercially available Selective Catalytic Reduction (SCR) catalysts from U.S., Japanese and European catalyst suppliers on a high-sulfur U.S. coal-fired boiler. SCR is a post-combustion nitrogen oxide (NO{sub x}) control technology that involve injecting ammonia into the flue gas generated from coal combustion in a boiler. The flue gas containing ammonia is then passed through a reactor that contains a specialized catalyst. In the presence of the catalyst, the ammonia reacts with NO{sub x} to form nitrogen and water vapor. Although SCR is widely practiced in Japan and Europe on gas-, oil-, and low-sulfur coal-fired boilers, there are several technical uncertainties associated with applying SCR to U.S. coals. These uncertainties include: (1) potential catalyst deactivation due to poisoning by trace metal species present in U.S. coals that are not present in other fuels; (2) performance of the technology and effects on the balance-of-plant equipment in the presence of high amounts of SO{sub 2} and SO{sub 3}; and (3) performance of a wide variety of SCR catalyst compositions, geometries and methods of manufacture under typical high-sulfur coal-fired utility operating conditions. These uncertainties are being explored by operating a series of small-scale SCR reactors and simultaneously exposing different SCR catalysts to flue gas derived from the combustion of high sulfur U.S. coal. The project is being conducted in the following three phases: permitting, environmental monitoring plan and preliminary engineering; detailed design engineering and construction; and operation, testing, disposition and final report. The project was in the operation and testing phase during this reporting period. Accomplishments for this period are described.

  5. New Technologies in Airframe and Engine Development

    E-Print Network [OSTI]

    Bustamante, FabiŠn E.

    5, 2011 #12;Current Aviation Era Highest level of technological innovation and change since advent Restrictions Emission of CO2 ≠ directly proportional to fuel consumption. Carbon "taxes". Emission of NOx costs and CO2 and NOx emissions. Boeing estimate for 787 5% lower fuel consumption from composites

  6. Suspension Hydrogen Reduction of Iron Oxide Concentrates

    SciTech Connect (OSTI)

    H.Y. Sohn

    2008-03-31T23:59:59.000Z

    The objective of the project is to develop a new ironmaking technology based on hydrogen and fine iron oxide concentrates in a suspension reduction process. The ultimate objective of the new technology is to replace the blast furnace and to drastically reduce CO2 emissions in the steel industry. The goals of this phase of development are; the performance of detailed material and energy balances, thermochemical and equilibrium calculations for sulfur and phosphorus impurities, the determination of the complete kinetics of hydrogen reduction and bench-scale testing of the suspension reduction process using a large laboratory flash reactor.

  7. Proceedings of the 6th International Fuel Cell Science, Engineering & Technology Conference

    E-Print Network [OSTI]

    Kammen, Daniel M.

    ). The town achieves its maximum CO2 emission reduction, 37% relative to the base case, with operating% energy cost savings, but with a 29% reduction in CO2 emissions. Strategy I is the most economical savings (1.5% with full federal and state incentives but no carbon tax) and maximal CO2 emission

  8. Dose Reduction Techniques

    SciTech Connect (OSTI)

    WAGGONER, L.O.

    2000-05-16T23:59:59.000Z

    As radiation safety specialists, one of the things we are required to do is evaluate tools, equipment, materials and work practices and decide whether the use of these products or work practices will reduce radiation dose or risk to the environment. There is a tendency for many workers that work with radioactive material to accomplish radiological work the same way they have always done it rather than look for new technology or change their work practices. New technology is being developed all the time that can make radiological work easier and result in less radiation dose to the worker or reduce the possibility that contamination will be spread to the environment. As we discuss the various tools and techniques that reduce radiation dose, keep in mind that the radiological controls should be reasonable. We can not always get the dose to zero, so we must try to accomplish the work efficiently and cost-effectively. There are times we may have to accept there is only so much you can do. The goal is to do the smart things that protect the worker but do not hinder him while the task is being accomplished. In addition, we should not demand that large amounts of money be spent for equipment that has marginal value in order to save a few millirem. We have broken the handout into sections that should simplify the presentation. Time, distance, shielding, and source reduction are methods used to reduce dose and are covered in Part I on work execution. We then look at operational considerations, radiological design parameters, and discuss the characteristics of personnel who deal with ALARA. This handout should give you an overview of what it takes to have an effective dose reduction program.

  9. Environmental tax in a green market Dorothe BRECARD(*)

    E-Print Network [OSTI]

    Boyer, Edmond

    EA 4272 Environmental tax in a green market Dorothťe BRECARD(*) 2009/14 (*) LEMNA, Universitť de,version1-1Oct2009 #12;Environmental tax in a green market Dorothťe Brťcard Universitť de Nantes, LEMNA by consumers' environmental awareness and competition between firms for both environmental quality and product

  10. Fuel Cell Tax Incentives: How Monetization Lowers the

    E-Print Network [OSTI]

    for electricity produced and sold by a qualified facility for a 5- or 10-year period. o Currently 2.1 cent or 1Fuel Cell Tax Incentives: How Monetization Lowers the Government Outlay By: Lee J. Peterson, Esq.48-9(a)(1). 5R G Building Business Value February 19, 2009 #12;How Do Tax Credits Minimize Government

  11. MEETING ABSTRACT Open Access Predominant role of Tax sumoylation in

    E-Print Network [OSTI]

    Boyer, Edmond

    the NF-kB pathway by acting both at cytoplasmic and nuclear levels. In the cytoplasm, Tax binds to and activates the IkB Kinase (IKK) complex while in the nucleus, Tax assembles tran- scriptional active nuclear bodies. Others and we have previously demonstrated that the cytoplasmic/nuclear partition and NF

  12. In this issue: New Tax Incentives for Land in Conservation

    E-Print Network [OSTI]

    Watson, Craig A.

    In this issue: ∑ New Tax Incentives for Land in Conservation ∑ Florida's Outstanding Tree Farmers Quantifies Economic Impact of Private, Working Forests ∑ New Longleaf Book for Landowners and Foresters ∑ Get Landowners and Resource Professionals Volume 16, No. 4 Spring 2010 New Tax Incentives for Land

  13. Tax policies, vintage capital, and exit and entry of plants

    E-Print Network [OSTI]

    Chang, Shao-Jung

    2006-04-12T23:59:59.000Z

    caused by different types of shocks. The simulation method used here is linear approximation. My results show that in the steady-state economy, given a fixed level of gov- ernment expenditure and a zero property tax rate, the capital-income tax rate...

  14. The Time for a Carbon Tax is Now

    E-Print Network [OSTI]

    Griffin, James M.; Gawande, Kishore

    The U.S. needs to get its finances under control without resorting to the usual fixes of raising taxes and/or cutting spending, which would stymie recovery. The case for a carbon tax is a compelling one, given our current macroeconomic quandary...

  15. The Decline of Fuel Taxes and New Transportation Funding Options

    E-Print Network [OSTI]

    Manning, Kevin M.

    2012-12-14T23:59:59.000Z

    of the tax. With no increase since 1993, the tax has lost over a third of its purchasing power over that time. Additionally, Corporate Average Fuel Economy (CAFE) standards are rising, meaning vehicles are more fuel efficient, which is positive in one regard...

  16. SECTORAL EFFECTS OF TAX REFORMS IN AN OPEN ECONOMY

    E-Print Network [OSTI]

    Boyer, Edmond

    SECTORAL EFFECTS OF TAX REFORMS IN AN OPEN ECONOMY Olivier CARDI Romain RESTOUT December, 2010 REFORMS IN AN OPEN ECONOMY Olivier CARDI Universitīe Panthīeon-Assas ERMES Ecole Polytechnique Romain with traded and non traded goods to in- vestigate the sectoral effects of three tax reforms: i) two revenue

  17. Fuel Cell Financing for Tax-Exempt Entitities

    E-Print Network [OSTI]

    of directly purchasing a 300 kW fuel cell for a combined heat and power (CHP) system with (2) the cost of pur service contracts to include the Energy Investment Tax Credit. Introduction The Energy Investment Tax Credit (ITC)1 can help reduce the cost of installing a fuel cell system. While Department of Treasury

  18. Tax Treatment of Natural Gas The "landowner" referred to in

    E-Print Network [OSTI]

    Boyer, Elizabeth W.

    Tax Treatment of Natural Gas Marcellus Education Fact Sheet The "landowner" referred and tax op- tions available to you as a result T he Marcellus shale geological formation underlies almost in this previously un- tapped formation. The Marcellus shale natural gas boom is creating unprecedented

  19. Modeling Generator Power Plant Portfolios and Pollution Taxes

    E-Print Network [OSTI]

    Nagurney, Anna

    Modeling Generator Power Plant Portfolios and Pollution Taxes in Electric Power Supply Chain;Modeling Energy Taxes and Credits: The Genco's Choice ∑ Each Genco has a portfolio of power plants ∑ Each power plant can have different supply costs and transaction costs ∑ Supply costs can reflect capital

  20. Impact of the Deficit Reduction Act of 1984 and the Wallop Amendment on energy sale contracts

    SciTech Connect (OSTI)

    Goodwin, L.M.

    1984-07-01T23:59:59.000Z

    The Wallop Amendment portion of the Deficit Reduction Act of 1984 establishes a new rule that energy project developers involved in cogeneration and alternative energy projects need to understand in order to meet tax requirements. The new rule addresses questions about the distinction between a service contract and a lease of property for tax purposes by establishing four requirements an energy sales contract must meet to be classified as a service contract: The service recipient cannot operate the facility, bear a significant financial burden due to nonperformance, receive a significant financial benefit, or have an option or obligation to purchase at other than a fair market value. The Act will affect the structure of future alternative energy projects, but continues to offer tax benefits as long as conditions are met.