National Library of Energy BETA

Sample records for reduce engine idling

  1. Diesel Engine Idling Test

    SciTech Connect (OSTI)

    Larry Zirker; James Francfort; Jordon Fielding

    2006-02-01

    In support of the Department of Energy’s FreedomCAR and Vehicle Technology Program Office goal to minimize diesel engine idling and reduce the consumption of millions of gallons of diesel fuel consumed during heavy vehicle idling periods, the Idaho National Laboratory (INL) conducted tests to characterize diesel engine wear rates caused by extended periods of idling. INL idled two fleet buses equipped with Detroit Diesel Series 50 engines, each for 1,000 hours. Engine wear metals were characterized from weekly oil analysis samples and destructive filter analyses. Full-flow and the bypass filter cartridges were removed at four stages of the testing and sent to an oil analysis laboratory for destructive analysis to ascertain the metals captured in the filters and to establish wear rate trends. Weekly samples were sent to two independent oil analysis laboratories. Concurrent with the filter analysis, a comprehensive array of other laboratory tests ascertained the condition of the oil, wear particle types, and ferrous particles. Extensive ferrogram testing physically showed the concentration of iron particles and associated debris in the oil. The tests results did not show the dramatic results anticipated but did show wear trends. New West Technologies, LLC, a DOE support company, supplied technical support and data analysis throughout the idle test.

  2. Locomotive Emission and Engine Idle Reduction Technology Demonstration Project

    SciTech Connect (OSTI)

    John R. Archer

    2005-03-14

    In response to a United States Department of Energy (DOE) solicitation, the Maryland Energy Administration (MEA), in partnership with CSX Transportation, Inc. (CSXT), submitted a proposal to DOE to support the demonstration of Auxiliary Power Unit (APU) technology on fifty-six CSXT locomotives. The project purpose was to demonstrate the idle fuel savings, the Nitrous Oxide (NOX) emissions reduction and the noise reduction capabilities of the APU. Fifty-six CSXT Baltimore Division locomotives were equipped with APUs, Engine Run Managers (ERM) and communications equipment to permit GPS tracking and data collection from the locomotives. Throughout the report there is mention of the percent time spent in the State of Maryland. The fifty-six locomotives spent most of their time inside the borders of Maryland and some spent all their time inside the state borders. Usually when a locomotive traveled beyond the Maryland State border it was into an adjoining state. They were divided into four groups according to assignment: (1) Power Unit/Switcher Mate units, (2) Remote Control units, (3) SD50 Pusher units and (4) Other units. The primary data of interest were idle data plus the status of the locomotive--stationary or moving. Also collected were main engine off, idling or working. Idle data were collected by county location, by locomotive status (stationary or moving) and type of idle (Idle 1, main engine idling, APU off; Idle 2, main engine off, APU on; Idle 3, main engine off, APU off; Idle 4, main engine idle, APU on). Desirable main engine idle states are main engine off and APU off or main engine off and APU on. Measuring the time the main engine spends in these desirable states versus the total time it could spend in an engine idling state allows the calculation of Percent Idle Management Effectiveness (%IME). IME is the result of the operation of the APU plus the implementation of CSXT's Warm Weather Shutdown Policy. It is difficult to separate the two. The units demonstrated an IME of 64% at stationary idle for the test period. The data collected during calendar year 2004 demonstrated that 707,600 gallons of fuel were saved and 285 tons of NOX were not emitted as a result of idle management in stationary idle, which translates to 12,636 gallons and 5.1 tons of NOx per unit respectively. The noise reduction capabilities of the APU demonstrated that at 150 feet from the locomotive the loaded APU with the main engine shut down generated noise that was only marginally above ambient noise level.

  3. IDL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation CurrentHenry Bellamy, Ph.D.FoodHydropower, Wave andTechnicalBrief History ofIDL

  4. Application of Sleeper Cab Thermal Management Technologies to Reduce Idle Climate Control Loads in Long-Haul Trucks

    SciTech Connect (OSTI)

    Lustbader, J. A.; Venson, T.; Adelman, S.; Dehart, C.; Yeakel, S.; Castillo, M. S.

    2012-10-01

    Each intercity long-haul truck in the U.S. idles approximately 1,800 hrs per year, primarily for sleeper cab hotel loads. Including workday idling, over 2 billion gallons of fuel are used annually for truck idling. NREL's CoolCab project works closely with industry to design efficient thermal management systems for long-haul trucks that keep the cab comfortable with minimized engine idling and fuel use. The impact of thermal load reduction technologies on idle reduction systems were characterized by conducting thermal soak tests, overall heat transfer tests, and 10-hour rest period A/C tests. Technologies evaluated include advanced insulation packages, a solar reflective film applied to the vehicle's opaque exterior surfaces, a truck featuring both film and insulation, and a battery-powered A/C system. Opportunities were identified to reduce heating and cooling loads for long-haul truck idling by 36% and 34%, respectively, which yielded a 23% reduction in battery pack capacity of the idle-reduction system. Data were also collected for development and validation of a CoolCalc HVAC truck cab model. CoolCalc is an easy-to-use, simplified, physics-based HVAC load estimation tool that requires no meshing, has flexible geometry, excludes unnecessary detail, and is less time-intensive than more detailed computer-aided engineering modeling approaches.

  5. On the Nature of Particulate Emissions from DISI Engines at Cold-Fast-Idle

    E-Print Network [OSTI]

    Ketterer, Justin E.

    Particulate emissions from a production gasoline direct injection spark ignition engine were studied under a typical cold-fast-idle condition (1200 rpm, 2 bar NIMEP). The particle number (PN) density in the 22 to 365 nm ...

  6. Comparing Emissions Benefits from Regulating Heavy Vehicle Idling...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    from Regulating Heavy Vehicle Idling Comparing Emissions Benefits from Regulating Heavy Vehicle Idling 2005 Diesel Engine Emissions Reduction (DEER) Conference...

  7. Idling - cruising the fuel inefficiency highway.

    SciTech Connect (OSTI)

    Gaines, L.; Levinson, T.

    2011-06-30

    What is the purpose of idling? The scale of idling can be small, as when parents idle their vehicles while waiting for their children outside of school, or it can be large, as when ocean liners are in port. In many cases, the primary purpose for idling is to control the temperature of a passenger or freight compartment. Large line-haul trucks idle overnight to keep fuel and the engine warm, for the resting driver's comfort, to mask out noises and smells, and for safety. In addition, all classes of trucks idle during the workday at ports and terminals, busy delivery sites, border crossings, and other work sites. They may be idling to enable slow movement in a queue (creep idling) or to provide other services. Bus drivers also idle their vehicles while they wait for passengers and to warm up in the morning. Even locomotive engines are idled so they start, for hotel load, to keep the battery charged, to keep the toilet water from freezing, and for air brakes, or because the operator idles out of habit. Although this document focuses on long-haul trucks, much of the information applies to other vehicles as well. The impacts of idling are substantial, with as much as 6 billion gallons of fuel burned unnecessarily each year in the United States at a cost of over $20 billion. The extra hours of engine operation also cost the owners money for more frequent maintenance and overhauls. In addition, idling vehicles emit particulates (PM{sub 10}), nitrogen dioxide (NO{sub 2}), carbon monoxide (CO), and carbon dioxide (CO{sub 2}). These emissions, along with noise from idling vehicles, have led to many local and state restrictions on idling. Two main factors have combined to create a surge of interest in idling reduction (IR): (1) Increasing restrictions on idling for heavy vehicles and (2) The price of diesel fuel. Because stakeholders focus their efforts on improving different factors (air quality, fuel economy, noise level), they do not necessarily agree on the most advantageous technological alternatives to implement. In addition, although many equipment manufacturers have tried to educate customers and government agencies, they often provide conflicting claims about the comparative merits of different devices. This makes it difficult for truck owners to choose the right equipment for their needs. In this study, we present the first comparison of IR technologies with each other and with idling on the basis of both costs and full fuel-cycle emissions, for different locations, fuel prices, and idling patterns. The preferences described are for the technologies that reduce total emissions the most and cost truck owners the least. We also discuss how regulatory issues and legislation affect IR, what financial incentives help to promote IR, and how outreach and education approaches can be adopted to reduce the need to idle. Finally, we offer a prediction of how future research and development (R&D), regulations, and citizen involvement can help to improve fuel economy and clean the air.

  8. November 2014 National Idling Reduction Network News | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    vehicle operators. Plugging in rather than idling saves fuel and reduces emissions and engine wear. In New York City, a project is underway to test the viability of ambulances...

  9. Caterpillar MorElectric DOE Idle Reduction Demonstration Program

    SciTech Connect (OSTI)

    John Bernardi

    2007-09-30

    This project titled 'Demonstration of the New MorElectric{trademark} Technology as an Idle Reduction Solution' is one of four demonstration projects awarded by the US Department of Energy in 2002. The goal of these demonstration and evaluation projects was to gather objective in-use information on the performance of available idle reduction technologies by characterizing the cost; fuel, maintenance, and engine life savings; payback; and user impressions of various systems and techniques. In brief, the Caterpillar Inc. project involved applying electrically driven accessories for cab comfort during engine-off stops and for reducing fuel consumption during on-highway operation. Caterpillar had equipped and operated five new trucks with the technology in conjunction with International Truck and Engine Corporation and COX Transfer. The most significant result of the project was a demonstrated average idle reduction of 13.8% for the 5 truck MEI fleet over the control fleet. It should be noted that the control fleet trucks were also equipped with an idle reduction device that would start and stop the main engine automatically in order to maintain cab temperature. The control fleet idle usage would have been reduced by 3858 hours over the 2 year period with the MEI system installed, or approximately 2315 gallons of fuel less (calculations assume a fuel consumption of 0.6 gallons per hour for the 13 liter engine at idle). The fuel saved will be significantly larger for higher displacement engines without idle reduction equipment such as the engine auto start/stop device used by COX Transfer. It is common for engines to consume 1.0 gallons per hour which would increase the fuel savings to approximately 1260 gallons per truck per year of typical idling (1800 hours idle/yr).

  10. Vibro-acoustical comfort in cars at idle : human perception of simulated sounds and vibrations from three and four cylinder diesel engines

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    three and four cylinder diesel engines Etienne Parizet, Maël Amari Laboratoire Vibrations Acoustique This paper deals with comfort in diesel cars running at idle. A bench was used to reproduce the vertical

  11. Particulate matter emissions from a DISI engine under cold-fast-idle conditions for ethanol-gasoline blends

    E-Print Network [OSTI]

    Dimou, Iason

    2011-01-01

    In an effort to build internal combustion engines with both reduced brake-specific fuel consumption and better emission control, engineers developed the Direct Injection Spark Ignition (DISI) engine. DISI engines combine ...

  12. National Idling Reduction Network News - December 2009

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ssprogramssblilp.htm Environmental Finance Center, University of Maryland Port of Baltimore Clean Diesel Program (including Locomotive Engine Idle Reduction Grant Sub- Program)...

  13. National Idling Reduction Network News - January 2010

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ogramssblilp.htm Environmental Finance Center, University of Maryland Port of Baltimore Clean Diesel Program (including Locomotive Engine Idle Reduction Grant Sub- Program)...

  14. National Idling Reduction Network News - November 2009

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    essprogramssblilp.htm Environmental Finance Center, University of Maryland Port of Baltimore Clean Diesel Program (including Locomotive Engine Idle Reduction Grant Sub-Program)...

  15. Reducing Idle Power Consumption in Office Spaces Saves U.S. Navy in Energy Costs (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-04-01

    As part of a two-year project to demonstrate energy efficiency measures, renewable energy generation, and energy systems integration, the National Renewable Energy Laboratory (NREL) has identified advanced plug load controls as a promising technology for reducing energy use and related costs in the U.S. Navy's Naval Facilities Engineering Command (NAVFAC) office spaces.

  16. Soot formation in direct injection spark ignition engines under cold-idle operating conditions

    E-Print Network [OSTI]

    Ketterer, Justin Edward

    2013-01-01

    Direct injection spark ignition engines are growing rapidly in popularity, largely due to the fuel efficiency improvements in the turbo-downsized engine configuration that are enabled by direct injection technology. ...

  17. Investigation of Diesel combustion using multiple injection strategies for idling after cold start of passenger-car engines

    SciTech Connect (OSTI)

    Payri, F.; Broatch, A.; Salavert, J.M.; Martin, J.

    2010-10-15

    A comprehensive investigation was carried out in order to better understand the combustion behaviour in a low compression ratio DI Diesel engine when multiple injection strategies are applied just after the engine cold starts in low temperature conditions (idling). More specifically, the aim of this study was twofold: on one hand, to understand the effect of the multiple injection strategies on the indicated mean effective pressure; on the other hand, to contribute to the understanding of combustion stability characterized by the coefficient of variation of indicated mean effective pressure. The first objective was fulfilled by analyzing the rate of heat release obtained by in-cylinder pressure diagnosis. The results showed that the timing of the pilot injection closest to the main injection was the most influential parameter based on the behaviour of the rate of heat release (regardless of the multiple injection strategy applied). For the second objective, the combustion stability was found to be correlated with the combustion centroid angle. The results showed a trend between them and the existence of a range of centroid angles where the combustion stability is strong enough. In addition, it was also evident that convenient split injection allows shifting the centroid to such a zone and improves combustion stability after start. (author)

  18. Particulate Matter Emissions from a Direct Injection Spark Ignition Engine under Cold Fast Idle Conditions for Ethanol-Gasoline Blends

    E-Print Network [OSTI]

    Dimou, Iason

    The engine out particular matter number (PN) distributions at engine coolant temperature (ECT) of 0° C to 40° C for ethanol/ gasoline blends (E0 to E85) have been measured for a direct-injection spark ignition engine under ...

  19. Increasing LTC Engine Efficiency by Reducing Pressure-Oscillation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Increasing LTC Engine Efficiency by Reducing Pressure-Oscillation-Related Heat Transfer Losses Increasing LTC Engine Efficiency by Reducing Pressure-Oscillation-Related Heat...

  20. An Introduction to IDL Instructor

    E-Print Network [OSTI]

    Collett Jr., Jeffrey L.

    Fanning, IDL Programming Techniques, 2nd Edition. ­ Liam E. Gumley, Practical IDL Programming #12 Basic syntax (variable types, loops, program control) Program structure (procedure and subroutines programs from IDL #12;Advantages of IDL Optimized for array operations ­ Independent operations

  1. Potential Benefits of Utilizing Fuel Cell Auxiliary Power Units in Lieu of Heavy-Duty Truck Engine Idling

    E-Print Network [OSTI]

    2001-01-01

    truck fuel and lubricant consumption through elimination offuel consumption, lubricant consumption, and engine wear,fuel consumption, lubricant consumption, and maintenance

  2. IDL Syllabus Week 1 (September 29): Introduction

    E-Print Network [OSTI]

    Collett Jr., Jeffrey L.

    .google.com/group/comp.lang.idl-pvwave/topics?pli=1 http://idlastro.gsfc.nasa.gov/idl_html_help/Functional_List_of_IDL_Routines.html Books: David

  3. Which Idling Reduction Technologeis are the Best? | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Idling Reduction Technologeis are the Best? Which Idling Reduction Technologeis are the Best? Benefits due to idling reduction depend on fuel and capital cost of equipment, idling...

  4. Engineering innovation to reduce wind power COE

    SciTech Connect (OSTI)

    Ammerman, Curtt Nelson

    2011-01-10

    There are enough wind resources in the US to provide 10 times the electric power we currently use, however wind power only accounts for 2% of our total electricity production. One of the main limitations to wind use is cost. Wind power currently costs 5-to-8 cents per kilowatt-hour, which is more than twice the cost of electricity generated by burning coal. Our Intelligent Wind Turbine LDRD Project is applying LANL's leading-edge engineering expertise in modeling and simulation, experimental validation, and advanced sensing technologies to challenges faced in the design and operation of modern wind turbines.

  5. Control of Variable Geometry Turbocharged Diesel Engines for Reduced Emissions

    E-Print Network [OSTI]

    Stefanopoulou, Anna

    Control of Variable Geometry Turbocharged Diesel Engines for Reduced Emissions A.G. Stefanopoulouz Introduction In this paper we consider an automotive control problem for a variable geometry turbocharged (VGT torque output as compared to (non-turbocharged) naturally aspirated engines 13]. The power generated

  6. National Idling Reduction Network News - April 2011 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    regulations, idling reduction grants, idling reduction general news, summary of state ani-idling regulations, and upcoming meetings and events. apr11networknews.pdf More...

  7. National Idling Reduction Network News - April 2010 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    regulations, idling reduction grants, idling reduction general news, summary of state ani-idling regulations, and upcoming meetings and events. apr10networknews.pdf More...

  8. National Idling Reduction Network News - October 2009 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    regulations, idling reduction grants, idling reduction general news, summary of state ani-idling regulations, and upcoming meetings and events. oct09networknews.pdf More...

  9. National Idling Reduction Network News - December 2009 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    regulations, idling reduction grants, idling reduction general news, summary of state ani-idling regulations, and upcoming meetings and events. dec09networknews.pdf More...

  10. Power Capping Via Forced Idleness Anshul Gandhi

    E-Print Network [OSTI]

    Harchol-Balter, Mor

    Power Capping Via Forced Idleness Anshul Gandhi Carnegie Mellon University anshulg@cs.cmu.edu Mor@us.ibm.com Abstract We introduce a novel power capping technique, IdleCap, that achieves higher effective server frequency for a given power constraint than existing techniques. IdleCap works by repeatedly alternating

  11. Idling is Not the Way to Go

    SciTech Connect (OSTI)

    2013-06-01

    Researchers estimate that idling from heavy-duty and light-duty vehicles combined wastes about 6 billion gallons of fuel annually. Many states have put restrictions on idling, especially in metropolitan areas. Clearly, idling is not the way to go.

  12. National Idling Reduction Network News - April 2011

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    go to http:www.transportation.anl.govenginesidlingtools.html. The idling reduction Web pages of DOE's Alternative Fuels and Advanced Vehicles Data Center website have also...

  13. Idling is Not the Way to Go

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    idling around schools can contribute to asthma and other ailments, as children's lungs are more susceptible to damage than adults' bodies. Unfortunately, there are a few...

  14. Vehicle Technologies Office: National Idling Reduction Network...

    Energy Savers [EERE]

    Past Newsletters The National Idling Reduction Network News is currently sent as an HTML newsletter and issues starting with the May 2014 newsletter can be searched via the...

  15. National Idling Reduction Network News - August 2012

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    awareness in the state's drivers manual; 2. Increase idling awareness, along with other eco-driving behaviors, in drivers education curricula; and 3. Work with Vermont's science...

  16. Which is Greener: Idle, or Stop and Restart? | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    is Greener: Idle, or Stop and Restart? This poster presents data comparing fuel use and emissions for short passenger-car stops vs. idling. Fuel use is always greater for idling...

  17. Evaluating Benefits of Idling Restrictions in a Large Northern...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Evaluating Benefits of Idling Restrictions in a Large Northern City While an anti-idling law in a large northern city has brought about the deployment of anti-idling technologies...

  18. Fact #861 February 23, 2015 Idle Fuel Consumption for Selected...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1 February 23, 2015 Idle Fuel Consumption for Selected Gasoline and Diesel Vehicles Fact 861 February 23, 2015 Idle Fuel Consumption for Selected Gasoline and Diesel Vehicles...

  19. Idling Emissions Reduction Technology with Low Temperature Combustion...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Idling Emissions Reduction Technology with Low Temperature Combustion of DI Biodiesel and PFI n-Butanol Idling Emissions Reduction Technology with Low Temperature Combustion of DI...

  20. Emissions from Idling Trucks for Extended Time Periods | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Idling Trucks for Extended Time Periods Emissions from Idling Trucks for Extended Time Periods 2002 DEER Conference Presentation: Oak Ridge National Laboratory 2002deerlewis.pdf...

  1. A surety engineering framework to reduce cognitive systems risks.

    SciTech Connect (OSTI)

    Caudell, Thomas P.; Peercy, David Eugene; Caldera, Eva O.; Shaneyfelt, Wendy L.

    2008-12-01

    Cognitive science research investigates the advancement of human cognition and neuroscience capabilities. Addressing risks associated with these advancements can counter potential program failures, legal and ethical issues, constraints to scientific research, and product vulnerabilities. Survey results, focus group discussions, cognitive science experts, and surety researchers concur technical risks exist that could impact cognitive science research in areas such as medicine, privacy, human enhancement, law and policy, military applications, and national security (SAND2006-6895). This SAND report documents a surety engineering framework and a process for identifying cognitive system technical, ethical, legal and societal risks and applying appropriate surety methods to reduce such risks. The framework consists of several models: Specification, Design, Evaluation, Risk, and Maturity. Two detailed case studies are included to illustrate the use of the process and framework. Several Appendices provide detailed information on existing cognitive system architectures; ethical, legal, and societal risk research; surety methods and technologies; and educing information research with a case study vignette. The process and framework provide a model for how cognitive systems research and full-scale product development can apply surety engineering to reduce perceived and actual risks.

  2. Increasing LTC Engine Efficiency by Reducing Pressure-Oscillation-Related Heat Transfer Losses

    Broader source: Energy.gov [DOE]

    This research discusses how reducing heat-transfer losses from pressure oscillation can increase low-temperature combustion engine efficiency.

  3. National Idling Reduction Network News - July 2012

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    http:wedc.orgsep and select the second video. More information is available at http:energy.govarticlesidle-free-systems-does-not-stand-idly and http:idlefreesystems.com....

  4. National Idling Reduction Network News - July 2013

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the battery state of charge. If the state of charge falls below a predetermined level, IdleWatch II automatically restarts the vehicle to recharge the battery (or notifies...

  5. National Idling Reduction Network News - April 2013

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EBINAR&utmcampaignCH+Robinson+follo wup+2&utmmediumemail DieselProgress Nickel Supercapacitors as Part of an Idle-Reduction Strategy http:www.dpna- digital.comdpna...

  6. xdamp Version 6 : an IDL-based data and image manipulation program.

    SciTech Connect (OSTI)

    Ballard, William Parker

    2012-04-01

    The original DAMP (DAta Manipulation Program) was written by Mark Hedemann of Sandia National Laboratories and used the CA-DISSPLA{trademark} (available from Computer Associates International, Inc., Garden City, NY) graphics package as its engine. It was used to plot, modify, and otherwise manipulate the one-dimensional data waveforms (data vs. time) from a wide variety of accelerators. With the waning of CA-DISSPLA and the increasing popularity of Unix(reg sign)-based workstations, a replacement was needed. This package uses the IDL(reg sign) software, available from Research Systems Incorporated, a Xerox company, in Boulder, Colorado, as the engine, and creates a set of widgets to manipulate the data in a manner similar to the original DAMP and earlier versions of xdamp. IDL is currently supported on a wide variety of Unix platforms such as IBM(reg sign) workstations, Hewlett Packard workstations, SUN(reg sign) workstations, Microsoft(reg sign) Windows{trademark} computers, Macintosh(reg sign) computers and Digital Equipment Corporation VMS(reg sign) and Alpha(reg sign) systems. Thus, xdamp is portable across many platforms. We have verified operation, albeit with some minor IDL bugs, on personal computers using Windows 7 and Windows Vista; Unix platforms; and Macintosh computers. Version 6 is an update that uses the IDL Virtual Machine to resolve the need for licensing IDL.

  7. Reducing the Particulate Emission Numbers in DI Gasoline Engines...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Emission Numbers in DI Gasoline Engines Formation of droplets was minimized through optimization of fuel vaporization and distribution avoiding airfuel zones richer than...

  8. Increasing efficiency, reducing emissions with hydrous ethanol in diesel engines

    E-Print Network [OSTI]

    Minnesota, University of

    & LOGISTICS SYMPOSIUM page 3 CIVIL ENGINEERING DIRECTIONS page 4 WORK-ZONE SAFETY page 5 PUBLIC AFFAIRS PHS to lead $10.4 million regional consortium on transportation safety CTS continued on page 7 In a national regional University Transportation Center (UTC) consortium focused on improving transportation safety

  9. Self-Adaptive Power Management of Idle Nodes in Large Scale Systems

    E-Print Network [OSTI]

    Zhu, Hong

    Self-Adaptive Power Management of Idle Nodes in Large Scale Systems YONGPENG LIU(1) , HONG ZHU(2 with multiple level dynamic sleep mechanisms to reduce power consumption. However, awaking sleeping nodes takes to balance between the systems energy consumption and the response time is a key problem in the power

  10. Stratified charge internal combustion engine

    SciTech Connect (OSTI)

    Skopil, A.O.

    1991-01-01

    This patent describes an internal combustion engine. It comprises: a main cylinder, a main piston within the main cylinder, and means for delivering a combustible charge into the main cylinder; a smaller idle cylinder, and idle piston within the idle cylinder, and means for delivering a combustible charge into the idle cylinder; an ignition passageway leading from the idle cylinder to the main cylinder; and an ignition device within the ignition passageway operable to ignite a compressed charge discharged by the idle cylinder into the ignition passageway. The passageway being positioned to discharge the ignited compressed charge from the idle cylinder into the main cylinder to ignite the compressed charge within the main cylinder.

  11. Alternative Fuels Data Center: Idle Reduction

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center Home Page on Digg Find More places toEthanolVehiclesHydrogenIdle

  12. Idling Pushes Profits out the Tailpipe

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center Home PageBlenderBusiness Case forbutton highlighted BrakingIdling

  13. Investigation of Alternative Fuels and Advanced Engine Technology: Improving Engine Efficiency and Reducing Emissions

    E-Print Network [OSTI]

    Rapp, Vi Hai

    2011-01-01

    Souder. HCCI operation of a dual-fuel natural gas engine fordual spark ignition improved efficiency by 1%, the unburned air-fuel

  14. Process and apparatus for reducing the loss of hydrogen from Stirling engines

    SciTech Connect (OSTI)

    Alger, D.L.

    1987-03-24

    A Stirling engine assembly is described which defines a working gas volume therein, the Stirling engine assembly comprising: a working gas reservoir for storing a working gas at a pressure greater than pressure of the working gas in the working volume of the Stirling engine; a trap cell operatively connected between an outlet of the reservoir and the Stirling engine working volume. The trap cell includes an enclosure having porous windows at either end thereof and a sorbent with an affinity for water vapor therein, such that water vapor adsorbed on the sorbent diffuses into the hydrogen passing from the reservoir into the working engine; a compressor means for drawing working gas from the Stirling engine working volume, through the trap cell and pumping the working gas into the hydrogen reservoir. The sorbent in the trap cell at the reduced pressure caused by the compressor adsorbs water vapor from the working gas such that substantially dry working gas is pumped by the compressor into the reservoir. The working gas is doped with water vapor by the tank cell as it passes into the Stirling engine and is dried by the trap cell as it is removed from the working engine for storage in the reservoir to prevent condensation of water vapor in the reservoir.

  15. Reducing Idle Listening during Data Collection in Wireless Sensor Networks

    E-Print Network [OSTI]

    Erlebach, Thomas

    the data; if all nodes send their data to the base station, the result is an over-consumption of energy due slots may occur, which lead to a waste of energy and an increase in latency. To alleviate these problems to function. Therefore, careful control of energy consumption is a very significant factor in WSNs and poses

  16. Alternative Fuels Data Center: Delaware Reduces Truck Idling With

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D S TA I NLoans TheCountyCitiesDrivingElectrified Parking

  17. Alternative Fuels Data Center: Students Reduce Vehicle Idling in San

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O D S TA IMarylandOrleansRentalSantaBiodieselAntonio,

  18. TECHNICAL NOTE HEAVY-DUTY DIESEL VEHICLE (HDDV) IDLING ACTIVITY AND

    E-Print Network [OSTI]

    #12;#12;TECHNICAL NOTE HEAVY-DUTY DIESEL VEHICLE (HDDV) IDLING ACTIVITY AND EMISSIONS STUDY: PHASE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Current Diesel Idling Emissions Factors

  19. Efficient Management of Idleness in Systems Ningfang Mi

    E-Print Network [OSTI]

    Riska, Alma

    operate 24 hours a day, 7 days a week, it is becoming common to schedule maintenance jobs during idle is critical to system operation, yet their priority is not as high as that of foreground jobs, i are also collected. Resource management of idle times is now done in a dynamic way, using statistical

  20. Method for reducing peak phase current and decreasing staring time for an internal combustion engine having an induction machine

    DOE Patents [OSTI]

    Amey, David L. (Birmingham, MI); Degner, Michael W. (Farmington Hills, MI)

    2002-01-01

    A method for reducing the starting time and reducing the peak phase currents for an internal combustion engine that is started using an induction machine starter/alternator. The starting time is reduced by pre-fluxing the induction machine and the peak phase currents are reduced by reducing the flux current command after a predetermined period of time has elapsed and concurrent to the application of the torque current command. The method of the present invention also provides a strategy for anticipating the start command for an internal combustion engine and determines a start strategy based on the start command and the operating state of the internal combustion engine.

  1. Reduced chemistry for a gasoline surrogate valid at engine-relevant conditions

    E-Print Network [OSTI]

    Niemeyer, Kyle E

    2014-01-01

    A detailed mechanism for the four-component gasoline surrogate developed by Lawrence Livermore National Laboratory has shown good agreement with experiments in engine-relevant conditions. However, with 1388 species and 5933 reversible reactions, this detailed mechanism is far too large to use in practical engine simulations. Therefore, reduction of the detailed mechanism was performed using a multi-stage approach consisting of the DRGEPSA method, unimportant reaction elimination, isomer lumping, and analytic QSS reduction based on CSP analysis. A new greedy sensitivity analysis algorithm was developed and demonstrated to be capable of removing more species for the same error limit compared to the conventional sensitivity analysis used in DRG-based skeletal reduction methods. Using this new greedy algorithm, several skeletal and reduced mechanisms were developed at varying levels of complexity and for different target condition ranges. The final skeletal and reduced mechanisms consisted of 213 and 148 species,...

  2. Cooling system having reduced mass pin fins for components in a gas turbine engine

    DOE Patents [OSTI]

    Lee, Ching-Pang; Jiang, Nan; Marra, John J

    2014-03-11

    A cooling system having one or more pin fins with reduced mass for a gas turbine engine is disclosed. The cooling system may include one or more first surfaces defining at least a portion of the cooling system. The pin fin may extend from the surface defining the cooling system and may have a noncircular cross-section taken generally parallel to the surface and at least part of an outer surface of the cross-section forms at least a quartercircle. A downstream side of the pin fin may have a cavity to reduce mass, thereby creating a more efficient turbine airfoil.

  3. Alternative Fuels Data Center: Idle Reduction Research and Development

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center Home Page on Digg FindPortsasIdle Reduction Programs atIdle

  4. Reduced

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMassR&D100 Winners * Impactsand engineersAcquisition andRedox ShuttleRedox

  5. Anti-Idling Battery for Truck Applications

    SciTech Connect (OSTI)

    Keith Kelly

    2011-09-30

    In accordance to the Assistance Agreement DE-EE0001036, the objective of this project was to develop an advanced high voltage lithium-ion battery for use in an all-electric HVAC system for Class-7-8 heavy duty trucks. This system will help heavy duty truck drivers meet the tough new anti-idling laws being implemented by over 23 states. Quallion will be partnering with a major OEM supplier of HVAC systems to develop this system. The major OEM supplier will provide Quallion the necessary interface requirements and HVAC hardware to ensure successful testing of the all-electric system. At the end of the program, Quallion will deliver test data on three (3) batteries as well as test data for the prototype HVAC system. The objectives of the program are: (1) Battery Development - Objective 1 - Define battery and electronics specifications in preparation for building the prototype module. (Completed - summary included in report) and Objective 2 - Establish a functional prototype battery and characterize three batteries in-house. (Completed - photos and data included in report); (2) HVAC Development - Objective 1 - Collaborate with manufacturers to define HVAC components, layout, and electronics in preparation for establishing the prototype system. (Completed - photos and data included in report) and Objective 2 - Acquire components for three functional prototypes for use by Quallion. (Completed - photos and data included in report).

  6. Reducing cold start hydrocarbon emissions from port fuel injected spark ignition engines with improved management of hardware & controls

    E-Print Network [OSTI]

    Lang, Kevin R., 1980-

    2006-01-01

    An experimental study was performed to investigate strategies for reducing cold start hydrocarbon (HC) emissions from port fuel injected (PFI) spark ignition (SI) engines with better use of existing hardware and control ...

  7. National Idling Reduction Network News - December 2011

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    outlet, is designed to power vehicles' nonpropulsion functions, such as booms. If the battery charge falls below a certain level, the system automatically starts the engine to...

  8. National Idling Reduction Network News - February 2012

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    generators and ambulances with auxiliary batteries, allowing these vehicle engines to be shut down and power provided from less fuel-intensive and polluting sources. While the...

  9. Idling Emissions Reduction Technology with Low Temperature Combustion of DI Biodiesel and PFI n-Butanol

    Broader source: Energy.gov [DOE]

    Results from an idling strategy using PCCI coupled with LTC indicate that, when used with n-butanol, it can be very promising for extended idling including the LTC regimes.

  10. Nitrogen enriched combustion of a natural gas internal combustion engine to reduce NO.sub.x emissions

    DOE Patents [OSTI]

    Biruduganti, Munidhar S. (Naperville, IL); Gupta, Sreenath Borra (Naperville, IL); Sekar, R. Raj (Naperville, IL); McConnell, Steven S. (Shorewood, IL)

    2008-11-25

    A method and system for reducing nitrous oxide emissions from an internal combustion engine. An input gas stream of natural gas includes a nitrogen gas enrichment which reduces nitrous oxide emissions. In addition ignition timing for gas combustion is advanced to improve FCE while maintaining lower nitrous oxide emissions.

  11. Advanced Reciprocating Engine Systems (ARES): Raising the Bar on Engine Technology with Increased Efficiency and Reduced Emissions, at Attractive Costs

    SciTech Connect (OSTI)

    2009-02-01

    This is a fact sheet on the U.S. Department of Energy's (DOE) Advanced Reciprocating Engine Systems program (ARES), which is designed to promote separate, but parallel engine development between the major stationary, gaseous fueled engine manufacturers in the United States.

  12. Theoretical and experimental investigation into anti-idling A/C system F. Bagheri

    E-Print Network [OSTI]

    Bahrami, Majid

    : Air conditioning & refrigeration Anti-idling Optimum COP a b s t r a c t In this study, a recently developed truck anti-idling air conditioning (A/C) system is investigated. A mathematical model is developed draw by the air conditioning system stands for 4­8 percent of the total idling GHG emission [8

  13. Internal combustion engine fuel feed

    SciTech Connect (OSTI)

    Cochard, P.; Guicherd, C.

    1980-02-19

    In a method and apparatus for controlling the fuel feed to a stratified-charge internal combustion engine, from idle up to the position corresponding with the maximum flow of air, the overall richness (Rg) of the combustible mixture is reduced by acting simultaneously upon the flow of fuel feeding the main chamber and upon the flow of fuel injected into the auxiliary chamber. For higher loads the maximum flow of air is kept constant and rg is increased by continuing to act upon both fuel flows. By keeping the richness of the mixture in the auxiliary chamber substantially constant, it is possible to obtain the best compromise between the performance of the engine and the emission of pollutant gases.

  14. Complete Fuel Combustion for Diesel Engines Resulting in Greatly Reduced Emissions and Improved Fuel Efficiency

    Broader source: Energy.gov [DOE]

    An advanced engine design that is 15 percent more efficient than diesel, pollution free, and uses any fuel.

  15. Quantifying the Effects of Idle-Stop Systems on Fuel Economy in Light-Duty Passenger Vehicles

    SciTech Connect (OSTI)

    Jeff Wishart; Matthew Shirk

    2012-12-01

    Vehicles equipped with idle-stop (IS) systems are capable of engine shut down when the vehicle is stopped and rapid engine re-start for the vehicle launch. This capability reduces fuel consumption and emissions during periods when the engine is not being utilized to provide propulsion or to power accessories. IS systems are a low-cost and fast-growing technology in the industry-wide pursuit of increased vehicle efficiency, possibly becoming standard features in European vehicles in the near future. In contrast, currently there are only three non-hybrid vehicle models for sale in North America with IS systems and these models are distinctly low-volume models. As part of the United States Department of Energy’s Advanced Vehicle Testing Activity, ECOtality North America has tested the real-world effect of IS systems on fuel consumption in three vehicle models imported from Europe. These vehicles were chosen to represent three types of systems: (1) spark ignition with 12-V belt alternator starter; (2) compression ignition with 12-V belt alternator starter; and (3) direct-injection spark ignition, with 12-V belt alternator starter/combustion restart. The vehicles have undergone both dynamometer and on-road testing; the test results show somewhat conflicting data. The laboratory data and the portion of the on-road data in which driving is conducted on a prescribed route with trained drivers produced significant fuel economy improvement. However, the fleet data do not corroborate improvement, even though the data show significant engine-off time. It is possible that the effects of the varying driving styles and routes in the fleet testing overshadowed the fuel economy improvements. More testing with the same driver over routes that are similar with the IS system-enabled and disabled is recommended. There is anecdotal evidence that current Environmental Protection Agency fuel economy test procedures do not capture the fuel economy gains that IS systems produce in real-world driving. The program test results provide information on the veracity of these claims.

  16. Best-paper award winner, ASME Computers in Engineering Conference, 1994. REDUCING SETUP COST BY AUTOMATED GENERATION OF REDESIGN SUGGESTIONS

    E-Print Network [OSTI]

    Nau, Dana S.

    Best-paper award winner, ASME Computers in Engineering Conference, 1994. REDUCING SETUP COST BY AUTOMATED GENERATION OF REDESIGN SUGGESTIONS Diganta Das Mechanical Engr. Dept. and Institute for Systems of func- tionality, manufacturability, cost and other life-cycle factors. The speed and e cacy

  17. National Idling Reduction Network News - Early Spring 2009 | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURING OFFICESpecialAPPENDIX FOriginMaterialsEnergy Early Spring 2009 National Idling

  18. National Idling Reduction Network News - January 2013 | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURING OFFICESpecialAPPENDIX FOriginMaterialsEnergy EarlyEnergy 3 National Idling

  19. National Idling Reduction Network News - October 2010 | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURING OFFICESpecialAPPENDIX FOriginMaterialsEnergyEnergy 10 National Idling

  20. Alternative Fuels Data Center: Idle Reduction Benefits and Considerations

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center Home Page on Digg FindPortsas aEthanolAFDCHydrogenProductionIdle

  1. Alternative Fuels Data Center: Idle Reduction Programs at Tennessee Schools

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center Home Page on Digg FindPortsasIdle Reduction Programs at Tennessee

  2. Alternative Fuels Data Center: Idle Reduction Related Links

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center Home Page on Digg FindPortsasIdle Reduction Programs at

  3. Reducing fuel consumption on the field, by continuously measuring fuel quality on electronically fuel injected engines.

    Broader source: Energy.gov [DOE]

    Poster presented at the 16th Directions in Engine-Efficiency and Emissions Research (DEER) Conference in Detroit, MI, September 27-30, 2010.

  4. Exploration of Opportunities to Reduce Lead Times for Engineered-to-Order Products

    E-Print Network [OSTI]

    Tommelein, Iris D.

    for Engineered-To-Order (ETO) products. This research applies Transformation-Flow-Value (TFV) theory and lean not only in the procurement phase but also in the design and manufacturing phases, e.g., by forcing people

  5. Piston ring design for reduced friction in modern internal combustion engines

    E-Print Network [OSTI]

    Smedley, Grant, 1978-

    2004-01-01

    Piston ring friction losses account for approximately 20% of the total mechanical losses in modern internal combustion engines. A reduction in piston ring friction would therefore result in higher efficiency, lower fuel ...

  6. 21 2008, 12:00, Idle Gear Rattle in Manual Automotive Transmissions

    E-Print Network [OSTI]

    Psarrakos, Panayiotis

    21 2008, 12:00, , (). Idle Gear Rattle in Manual Automotive Transmissions) phenomena in Automotive Powertrain Systems, dynamic analysis of medical devices and virtual prototype

  7. Transport Layer Approaches for Improving Idle Energy in Challenged Sensor Networks

    E-Print Network [OSTI]

    Singh, Jaswinder Pal

    Transport Layer Approaches for Improving Idle Energy in Challenged Sensor Networks Yong Wang, Chieh Terms Design, Performance Keywords DTN, challenged sensor networks, idle energy, transport protocol, the study of energy efficient networking solutions in sensor networks has been focusing on networks

  8. Supplement for "Secondary organic aerosol1 formation from idling gasoline passenger vehicle2

    E-Print Network [OSTI]

    Meskhidze, Nicholas

    40 °C. This facilitates evaporation and1 degradation of organic contaminants on the chamber walls passenger vehicles were tested at idling, the three cars selected8 represented three different European emission classes. All tested vehicles used three way9 catalysts. In the idling case, the cars were driven

  9. Exploiting Idle Communication Power to Improve Wireless Network Performance and Energy Efficiency

    E-Print Network [OSTI]

    Chen, Songqing

    low and high channel rate stations. I. INTRODUCTION Mobile devices are usually driven by battery power, which we call the idle communication power of a station. In addition to battery power, mobile devicesExploiting Idle Communication Power to Improve Wireless Network Performance and Energy Efficiency

  10. Easy Web Interfaces to IDL Code for NSTX Data Analysis W. M. Davisa

    E-Print Network [OSTI]

    Princeton Plasma Physics Laboratory

    Easy Web Interfaces to IDL Code for NSTX Data Analysis W. M. Davisa * a Princeton Plasma Physics and debugging time. A variety of "Web Tools" for the analysis and display of raw and analyzed physics data are in use on NSTX [1], and new ones can be produced quickly from existing IDL [2] code. A Web Tool with only

  11. Reduction in Vehicle Idling Emissions Using RFID Parking Permits Dawson, Pakes-Ahlman, Graham, Gutierrez, Vilasdaechanont

    E-Print Network [OSTI]

    Sprott, Julien Clinton

    1 Reduction in Vehicle Idling Emissions Using RFID Parking Permits 9/20/13 Dawson, Pakes consumption and vehicle emissions. RFID Background RFID tags contain electronically stored data that can's entrance and exit from parking ramps. Table 1. Average Idle Emission Rates by Pollutant and Vehicle Type

  12. Extending lean operating limit and reducing emissions of methane spark-ignited engines using a microwave-assisted spark plug

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Rapp, Vi H.; DeFilippo, Anthony; Saxena, Samveg; Chen, Jyh-Yuan; Dibble, Robert W.; Nishiyama, Atsushi; Moon, Ahsa; Ikeda, Yuji

    2012-01-01

    A microwave-assisted spark plug was used to extend the lean operating limit (lean limit) and reduce emissions of an engine burning methane-air. In-cylinder pressure data were collected at normalized air-fuel ratios of ? = 1.46, ? = 1.51, ? = 1.57, ? = 1.68, and ? = 1.75. For each ?, microwave energy (power supplied to the magnetron per engine cycle) was varied from 0 mJ (spark discharge alone) to 1600 mJ. At lean conditions, the results showed adding microwave energy to a standard spark plug discharge increased the number of complete combustion cycles, improving engine stability as comparedmore »to spark-only operation. Addition of microwave energy also increased the indicated thermal efficiency by 4% at ? = 1.68. At ? = 1.75, the spark discharge alone was unable to consistently ignite the air-fuel mixture, resulting in frequent misfires. Although microwave energy produced more consistent ignition than spark discharge alone at ? = 1.75, 59% of the cycles only partially burned. Overall, the microwave-assisted spark plug increased engine performance under lean operating conditions (? = 1.68) but did not affect operation at conditions closer to stoichiometric.« less

  13. Impacts of Mid-level Biofuel Content in Gasoline on SIDI Engine-Out and Tailpipe Particulate Matter Emissions: Preprint

    SciTech Connect (OSTI)

    He, X.; Ireland, J. C.; Zigler, B. T.; Ratcliff, M. A.; Knoll, K. E.; Alleman, T. L.; Tester, J. T.

    2011-02-01

    The influences of ethanol and iso-butanol blended with gasoline on engine-out and post Three-Way Catalyst (TWC) particle size distribution and number concentration were studied using a GM 2.0L turbocharged Spark Ignition Direct Injection (SIDI) engine. The engine was operated using the production ECU with a dynamometer controlling the engine speed and the accelerator pedal position controlling the engine load. A TSI Fast Mobility Particle Sizer (FMPS) spectrometer was used to measure the particle size distribution in the range from 5.6 to 560 nm with a sampling rate of 1 Hz. US federal certification gasoline (E0), two ethanol-blended fuels (E10 and E20), and 11.7% iso-butanol blended fuel (BU12) were tested. Measurements were conducted at ten selected steady-state engine operation conditions. Bi-modal particle size distributions were observed for all operating conditions with peak values at particle sizes of 10 nm and 70 nm. Idle and low speed / low load conditions emitted higher total particle numbers than other operating conditions. At idle, the engine-out Particulate Matter (PM) emissions were dominated by nucleation mode particles, and the production TWC reduced these nucleation mode particles by more than 50%, while leaving the accumulation mode particle distribution unchanged. At engine load higher than 6 bar NMEP, accumulation mode particles dominated the engine-out particle emissions and the TWC had little effect. Compared to the baseline gasoline (E0), E10 does not significantly change PM emissions, while E20 and BU12 both reduce PM emissions under the conditions studied. Iso-butanol was observed to impact PM emissions more than ethanol, with up to 50% reductions at some conditions. In this paper, the issues related to PM measurement using FMPS are also discussed. While some uncertainties are due to engine variation, the FMPS must be operated under careful maintenance procedures in order to achieve repeatable measurement results.

  14. Engineering the use of green plants to reduce produced water disposal volume.

    SciTech Connect (OSTI)

    Hinchman, R.; Mollock, G. N.; Negri, M. C.; Settle, T.

    1998-01-29

    In 1990, the Laboratory began an investigation into biological approaches for the reduction of water produced from oil and gas wells. In the spring of 1995, the Company began an on-site experiment at an oil/gas lease in Oklahoma using one of these approaches. The process, known as phytoremediation, utilizes the ability of certain salt tolerant plants to draw the produced water through their roots, transpire the water from their leaves, and thereby reduce overall water disposal volumes and costs. At the Company experimental site, produced water flows through a trough where green plants (primarily cordgrass) have been planted in pea gravel. The produced water is drawn into the plant through its roots, evapotranspirates and deposits a salt residue on the plant leaves. The plant leaves are then harvested and used by a local rancher as cattle feed. The produced water is tested to assure it contains nothing harmful to cattle. In 1996, the Company set up another trough to compare evaporation rates using plants versus using an open container without plants. Data taken during all four seasons (water flow rate, temperature, pH, and conductivity) have shown that using plants to evapotranspirate produced water is safe, more cost effective than traditional methods and is environmentally sound.

  15. Predicted Impact of Idling Reduction Options for Heavy-Duty Diesel...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Diesel Trucks: A Comparison of Full-Fuel-Cycle Emissions, Energy Use, and Proximity to Urban Populations in Five States Predicted Impact of Idling Reduction Options for Heavy-Duty...

  16. Fact #861 February 23, 2015 Idle Fuel Consumption for Selected Gasoline and Diesel Vehicles

    Broader source: Energy.gov [DOE]

    Based on a worksheet developed by Argonne National Laboratory, the idle fuel consumption rate for selected gasoline and diesel vehicles with no load (no use of accessories such as air conditioners,...

  17. Reducing Your Leak Rate Without Repairing Leaks 

    E-Print Network [OSTI]

    Beals, C.

    2005-01-01

    below the header pressure have the added advantage of reducing the air consumption of equipment, as well as reducing the leak rate. Turn Off the Air to Idle Equipment In most plants, when production equipment operators shut off their equipment... of the reason why plant personnel often find leak repair unproductive. The other reason relates to the compressor controls. If the plant had several lubricated rotary screw compressors operating in modulation, repairing 2,000 cfm in leaks may only reduce...

  18. How Do You Reduce the Time You Spend Idling? | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i nA Guide to TappingWORKof Energy BeforeSavingss g n i rOn Tuesday, Shannon

  19. Fact #787: July 8, 2013 Truck Stop Electrification Reduces Idle Fuel

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12, 2015Executive Order14, 20111,FY 2007Traffic Congestion,

  20. December 2014 National Idling Reduction Network News | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fuel Than Restarting the Engine (Massachusetts Department of Energy Resources and Clean Cities) How To Create a Sustainable Green Fleet Policy (Green Fleet) HTUF Webinar: How To...

  1. May 2014 National Idling Reduction Network News | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    or engine emissions systems (EES). It is also compliant with CARB's Ultra-Low-Emission Transport Refrigeration Unit In-Use Performance Standards. More information is available...

  2. Organic gas emissions from a stoichiometric direct injection spark ignition engine operating on ethanol/gasoline blends

    E-Print Network [OSTI]

    Kar, Kenneth

    The organic gas emissions from a stoichiometric direct injection spark ignition engine operating on ethanol/gasoline blends have been assessed under warmed-up and cold idle conditions. The speciated emissions show that the ...

  3. Alternative Fuels Data Center: Light-Duty Vehicle Idle Reduction Strategies

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center Home Page on Digg FindPortsasIdle ReductionLight-Duty Vehicle Idle

  4. Development of Low Temperature Combustion Modes to Reduce Overall Emissions from a Medium-Duty, Four Cylinder Diesel Engine 

    E-Print Network [OSTI]

    Breen, Jonathan Robert

    2011-10-21

    Low temperature combustion (LTC) is an appealing new method of combustion that promises low nitric oxides and soot emissions while maintaining or improving on engine performance. The three main points of this study were ...

  5. ENGINEERING

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ENGINEERING the Future of ENERGY Regional University Alliance National Energy Technology Laboratory Office of Research and Development The Future of Energy The time to redraw...

  6. Engineering

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Includes Engineering Standards Manual, Master Specifications Index, Drafting Manual, Design Guides, and more. IHS Standards Expert login information Collections include ANSI,...

  7. Exploiting Idle Communication Power to Improve Wireless Network Performance and Energy Efficiency

    E-Print Network [OSTI]

    Wang, Haining

    rate stations. I. INTRODUCTION Mobile devices are usually driven by battery power. Due to limited communication power of a station. In addition to battery power, mobile devices are very sus- ceptibleExploiting Idle Communication Power to Improve Wireless Network Performance and Energy Efficiency

  8. October 2014 National Idling Reduction Network News | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergy Bills and ReduceNovemberDOE's PrioritiesOctober 2013 News Blast October

  9. October 2015 National Idling Reduction Network News | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergy Bills and ReduceNovemberDOE's PrioritiesOctober 2013 News BlastOctober 2015

  10. Engineering Engineering

    E-Print Network [OSTI]

    Maroncelli, Mark

    Engineering Engineering Technology & A T P E N N S T A T E 2 0 1 0 ­ 2 0 1 1 #12;2 Join us at penn state! Since 1896, Penn State has been a leader in engineering and engineering technology education varieties of engineering and engineering technology majors found anywhere in the United States. This means

  11. Oil Bypass Filter and Diesel Engine Idling Wear-Rate Evaluations...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2005deerzirker.pdf More Documents & Publications Demonstrated Petroleum Reduction Using Oil Bypass Filter Technology on Heavy and Light Vehicles Development of Partial Filter...

  12. Florida County Seeks to Reduce Emissions and Improve Traffic

    Office of Energy Efficiency and Renewable Energy (EERE)

    St. Johns County, Florida is tackling its traffic-timing problem with a little help from an Energy Department Energy Efficiency and Conservation Block grant. The county will use the grant to improve traffic flow by re-synchronizing signals at five major road segments. In total, 23 traffic signals will be retimed and synchronized, resulting in lower fuel consumption, shorter travel times, increased travel speed, less stopping and less engine idling.

  13. Thickness independent reduced forming voltage in oxygen engineered HfO{sub 2} based resistive switching memories

    SciTech Connect (OSTI)

    Sharath, S. U. Kurian, J.; Komissinskiy, P.; Hildebrandt, E.; Alff, L.; Bertaud, T.; Walczyk, C.; Calka, P.; Schroeder, T.

    2014-08-18

    The conducting filament forming voltage of stoichiometric hafnium oxide based resistive switching layers increases linearly with layer thickness. Using strongly reduced oxygen deficient hafnium oxide thin films grown on polycrystalline TiN/Si(001) substrates, the thickness dependence of the forming voltage is strongly suppressed. Instead, an almost constant forming voltage of about 3?V is observed up to 200?nm layer thickness. This effect suggests that filament formation and switching occurs for all samples in an oxidized HfO{sub 2} surface layer of a few nanometer thickness while the highly oxygen deficient thin film itself merely serves as a oxygen vacancy reservoir.

  14. ENGINEERING

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submitKansas Nuclear Profile 2010 KansasMarketsHanford TankENGINEERING the Future

  15. School of Computing, Informatics and Decision System Engineering

    E-Print Network [OSTI]

    Fainekos, Georgios E.

    driving - which would mean a loss of some control and in many cars also disables power steering. Braking is in error. The ECU monitors certain driving conditions, and when the engine is found to be out of tolerance an optimal driving condition outside its prescribed tolerances, a rough idle or stalling situation ensues

  16. Alternative Fuels Data Center: Idle-Reduction Efforts Cut Emissions and

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room News Publications TraditionalWith Propane Florida Schools FirstIdle Reduction Research

  17. Examining the Costs and Benefits of Technology Pathways for Reducing Fuel

    E-Print Network [OSTI]

    California at Davis, University of

    Examining the Costs and Benefits of Technology Pathways for Reducing Fuel Use and Emissions from On policy harmonized Tax credits Anti-idling Low Carbon Fuel Standard #12;Lifecycle Emissions Modeled in TOP-HDV 5 Fuel production, refining, and distribution Material acquisition, processing, and vehicle assembly

  18. Idle Spots

    E-Print Network [OSTI]

    Eddings, James Richard

    2009-06-02

    reacts with the clay and creates a unique glaze on the surface of the piece. Wood firing is similar to soda firing except that wood is the fuel to fire the kiln and the wood ash reacts with the clay to create a glaze on the surface of the piece. Through... soda or wood ash. The pasing of flame and the addition of soda are visualy recorded on the surface of the piece. Sandblasting, like natural erosion, takes away the outer skin and reveals the subsurface and cone 04 oxidation and painting increase...

  19. Control apparatus for hot gas engine

    DOE Patents [OSTI]

    Stotts, Robert E. (Clifton Park, NY)

    1986-01-01

    A mean pressure power control system for a hot gas (Stirling) engine utilizing a plurality of supply tanks for storing a working gas at different pressures. During pump down operations gas is bled from the engine by a compressor having a plurality of independent pumping volumes. In one embodiment of the invention, a bypass control valve system allows one or more of the compressor volumes to be connected to the storage tanks. By selectively sequencing the bypass valves, a capacity range can be developed over the compressor that allows for lower engine idle pressures and more rapid pump down rates.

  20. Power Management in RAID Server Disk System Using Multiple Idle States Hogil Kim, Eun Jung Kim and Rabi N. Mahapatra

    E-Print Network [OSTI]

    Kim, Eun Jung "EJ"

    -down power management scheme. 1. Introduction Energy is a significant issue to most computer system. AlthoughPower Management in RAID Server Disk System Using Multiple Idle States Hogil Kim, Eun Jung Kim systems are no exception to low power requirements. The power management in server systems has become

  1. Isuzu's new 12. 0L micro-computer controlled turbocharged diesel engine

    SciTech Connect (OSTI)

    Wakabayashi, M.; Sakata, S.; Hamanaka, K.

    1984-01-01

    Isuzu Motors Limited introduced in the Japanese market a new micro-computer controlled turbocharged 6RA1TC diesel engine which powers new Isuzu heavy-duty trucks in 1983. This engine has successfully achieved both fuel economy and vehicle performance. This was realized by the combination of the newly developed micro-computer controlled fuel injection system and turbocharged air-to-air intercooled four valve low friction diesel engine. The purpose of the computer control system is flexible and precise control of fuel flow rate and fuel injection timing. This provides maximum engine performance and driveability, best fuel economy combined with the gearing of the vehicle, and easy operation for drivers. Additionally, this engine offers the following features: Good cold startability; Constant speed Cruise Control; Automatic schedule idling speed during warm-up; Stable low speed idling; Light and quick throttle response; Monitoring display for best fuel economy operation; Monitor display for engine diagnosis.

  2. Control-Oriented Model of a Dual Equal Variable Cam Timing Spark Ignition Engine

    E-Print Network [OSTI]

    Grizzle, Jessy W.

    Control-Oriented Model of a Dual Equal Variable Cam Timing Spark Ignition Engine A. G of min- imizing exhaust emissions, providing increased fuel economy and satisfying driver perfor- mance that provides a tradeo among idle stability, fuel economy, and maximum torque performance. There are also

  3. Improving Diesel Engine Sweet-spot Efficiency and Adapting it to Improve Duty-cycle MPG- plus Increasing Propulsion and Reducing Cost

    Broader source: Energy.gov [DOE]

    Poster presented at the 16th Directions in Engine-Efficiency and Emissions Research (DEER) Conference in Detroit, MI, September 27-30, 2010.

  4. Advanced Reciprocating Engine Systems (ARES)

    Broader source: Energy.gov [DOE]

    Advanced Natural Gas Reciprocating Engines Increase Efficiency and Reduce Emissions for Distributed Power Generation Applications

  5. Engineering Engineering

    E-Print Network [OSTI]

    Davis President APS Neil E. Hejny Engineering Manager Raytheon Joseph W. Jackson Director Retrofit Manager Brooks-PRI Bill Twardy Manager, Research for SRP SRP Sam Werner IBM John Wood Hardware Design

  6. Energy use and emissions of idling-reduction options for heavy-duty diesel truacks a comparison.

    SciTech Connect (OSTI)

    Gaines, L. L.; Hartman, C. J. B.; Solomon, M. J.; Energy Systems; James Madison Univ.; Northeast States for Coordinated Air Use Management

    2009-01-01

    Pollution and energy analyses of different idling-reduction (IR) technologies have been limited to localized vehicle emissions and have neglected upstream energy use and regional emissions. In light of increasing regulation and government incentives for IR, this research analyzed the full fuel cycle effects of contemporary approaches. It compared emissions, energy use, and proximity to urban populations for nine alternatives, including idling, electrified parking spaces, auxiliary power units, and several combinations of these. It also compared effects for the United States and seven states: California, Florida, Illinois, New York, Texas, Virginia, and West Virginia. U.S. average emissions impacts from all onboard IR options were found to be lower than those from a 2007-compliant idling truck. Total particulate emissions from electrified parking spaces were found to be greater than those from a 2007 truck, but such emissions generally occurred in areas with low population density. The lowest energy use, carbon dioxide emissions, and nitrogen oxide emissions are seen with a direct-fired heater combined with electrified parking spaces for cooling, and the lowest particulate-matter emissions were found with a direct-fired heater combined with an onboard device for cooling. As expected, state-to-state variations in the climate and grid fuel mix influence the impacts of the full fuel cycle from IR technologies, and the most effective choice for one location may be less effective elsewhere.

  7. Microelectromechanical accelerometer with resonance-cancelling control circuit including an idle state

    DOE Patents [OSTI]

    Chu, Dahlon D. (Albuquerque, NM); Thelen, Jr., Donald C. (Bozeman, MT); Campbell, David V. (Albuquerque, NM)

    2001-01-01

    A digital feedback control circuit is disclosed for use in an accelerometer (e.g. a microelectromechanical accelerometer). The digital feedback control circuit, which periodically re-centers a proof mass in response to a sensed acceleration, is based on a sigma-delta (.SIGMA..DELTA.) configuration that includes a notch filter (e.g. a digital switched-capacitor filter) for rejecting signals due to mechanical resonances of the proof mass and further includes a comparator (e.g. a three-level comparator). The comparator generates one of three possible feedback states, with two of the feedback states acting to re-center the proof mass when that is needed, and with a third feedback state being an "idle" state which does not act to move the proof mass when no re-centering is needed. Additionally, the digital feedback control system includes an auto-zero trim capability for calibration of the accelerometer for accurate sensing of acceleration. The digital feedback control circuit can be fabricated using complementary metal-oxide semiconductor (CMOS) technology, bi-CMOS technology or bipolar technology and used in single- and dual-proof-mass accelerometers.

  8. Secretary Moniz's Remarks at the Washington Auto Show -- As Delivered...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    20 coming from advances in the engines and additional improvements coming from better aerodynamics, reduced weight, high-efficiency tires, technologies that limit idle time and...

  9. Turbocharged engine exhaust gas recirculation system

    SciTech Connect (OSTI)

    Stachowicz, R.W.

    1984-01-24

    Improved exhaust gas recirculation systems for turbocharged gas engines that include an exhaust pipe, a turbocharger connected thereto, and a carburetor connected with a source of gas for the engine. The recirculation system includes an air conduit extending from the turbocharger compressor discharge to a venturi, an exhaust gas conduit that extends from a connection with the exhaust pipe between the engine and the turbocharger to the venturi, a second air conduit that extends from the exhaust pipe to a connection with the first air conduit, and control valves located in the exhaust gas conduit and in the second air conduit. The valves are closed when the engine is being started or idling at no load and open when a load is imposed or when engine rpm's are increased. No pumps, blowers, etc. are needed because the system operates on a differential in pressure created within the system to cause the exhaust gas recirculation.

  10. Geological Engineering Geological Engineering

    E-Print Network [OSTI]

    Wehlau, David

    1 Geological Engineering l 1 Geological Engineering www.geol.ca Queen's Geological Engineering Vicki Remenda, PEng ­ GEOENG Head Department of Geological Sciences and Geological Engineering Miller Hall Welcome to... Orientation CLASS OF 2018 What is Geological Engineering ? Geological Engineering

  11. Engineering Technician

    Broader source: Energy.gov [DOE]

    Alternate Title(s):Civil Engineering Technician; Electrical Engineering Technician; Mechanical Engineering Technician; Environmental Engineering Technician

  12. Potential Benefits of Utilizing Fuel Cell Auxiliary Power Units in Lieu of Heavy-Duty Truck Engine Idling

    E-Print Network [OSTI]

    2001-01-01

    do not account for full fuel cycle emissions (e.g. emissionsfuel cell APUs, a full fuel cycle analysis should be done

  13. Study of Oil Degradation in Extended Idle Operation Heavy Duty Vehicles 

    E-Print Network [OSTI]

    Kader, Michael Kirk

    2013-01-18

    Advances in engine oil technology and increased combustion efficiency has resulted in the longer oil intervals in vehicles. Current oil change interval practice only takes into account the mileage a vehicle has driven and ...

  14. Engineering Electrical &

    E-Print Network [OSTI]

    Hickman, Mark

    Computer Engineering Electrical & Electronic Engineering Mechatronics Engineering Mechanical Engineering Civil Engineering Natural Resources Engineering Forest Engineering Chemical & Process Engineering ELECTIVE 2 Required Engineering Intermediate Year 2011 Eight Required Courses Chart: 120 points College

  15. Engineering Electrical &

    E-Print Network [OSTI]

    Hickman, Mark

    Computer Engineering Electrical & Electronic Engineering Mechatronics Engineering Mechanical Engineering Civil Engineering Natural Resources Engineering Forest Engineering Chemical & Process Engineering ELECTIVE 2 Required Engineering Intermediate Year 2012 Eight Required Courses Chart: 120 points College

  16. Engineering Engineering Education

    E-Print Network [OSTI]

    Simaan, Nabil

    E School of Engineering Engineering Education in a University Setting 292 Degree Programs in Engineering 294 Special Programs 296 Honors 298 Academic Regulations 300 Courses of Study 305 Engineering of Engineering is the largest and oldest private engineering school in the South. Classes offering engineering

  17. Generalized Reduced Order Modeling of Aeroservoelastic Systems

    E-Print Network [OSTI]

    Gariffo, James Michael

    2013-01-01

    Aeroelasticity, Dover, 1996. [7] Dowell, E. , Crawley, E. ,Engineering, 2010. [13] Dowell, E. , “Some Recent AdvancesFL, 2010. [14] Attar, P. and Dowell, E. , “A Reduced Order

  18. Reducing Logistics Footprints and Replenishment Demands: Nano...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: Reducing Logistics Footprints and Replenishment Demands: Nano-engineered Silica Aerogels a Proven Method for Water Treatment Citation Details In-Document Search...

  19. Staged combustion with piston engine and turbine engine supercharger

    DOE Patents [OSTI]

    Fischer, Larry E.; Anderson, Brian L.; O'Brien, Kevin C.

    2011-11-01

    A combustion engine method and system provides increased fuel efficiency and reduces polluting exhaust emissions by burning fuel in a two-stage combustion system. Fuel is combusted in a piston engine in a first stage producing piston engine exhaust gases. Fuel contained in the piston engine exhaust gases is combusted in a second stage turbine engine. Turbine engine exhaust gases are used to supercharge the piston engine.

  20. Staged combustion with piston engine and turbine engine supercharger

    DOE Patents [OSTI]

    Fischer, Larry E. (Los Gatos, CA); Anderson, Brian L. (Lodi, CA); O'Brien, Kevin C. (San Ramon, CA)

    2006-05-09

    A combustion engine method and system provides increased fuel efficiency and reduces polluting exhaust emissions by burning fuel in a two-stage combustion system. Fuel is combusted in a piston engine in a first stage producing piston engine exhaust gases. Fuel contained in the piston engine exhaust gases is combusted in a second stage turbine engine. Turbine engine exhaust gases are used to supercharge the piston engine.

  1. Hydrogen Assisted Diesel Combustion in a Common Rail Turbodiesel Engine

    Broader source: Energy.gov [DOE]

    This study measured the effects of hydrogen substitution on engine performance and reducing NOx emissions in a diesel engine

  2. MANUFACTURING ENGINEERING Manufacturing engineering

    E-Print Network [OSTI]

    MANUFACTURING ENGINEERING Manufacturing engineering transforms raw materials, parts, and operations, following a well- organized plan for each activity. Manufacturing engineering involves designing assuring a competitive level of productivity. The manufacturing engineering curriculum at WSU focuses

  3. 33engineering EnginEEring and

    E-Print Network [OSTI]

    Wagner, Stephan

    33engineering EnginEEring and ThE builT EnvironmEnT www.wits.ac.za/ebe #12;34 guide for applicants 2015 The study of Engineering Career opportunities for engineers are limitless and extend beyond the formal engineering sector. A career in engineering requires special talents ­ engineers need

  4. Fact #853 December 29, 2014 Stop/Start Technology is in nearly 5% of All New Light Vehicles Produced

    Broader source: Energy.gov [DOE]

    Stop/Start technology improves fuel economy by reducing engine idle time. As a vehicle slows to a stop, the engine is shut down but then immediately restarts when the break pedal is released so...

  5. ENGINEERING Master of Engineering

    E-Print Network [OSTI]

    Toronto, University of

    ENGINEERING GRADUATE STUDIES MEng Master of Engineering #12;"If you're considering an MEng program chose the MEng program at U of T." DOM LEE, MEng STUDENT #12;TAKE YOUR ENGINEERING CAREER TO THE NEXT knowledge. But to get ahead in today's workplace, engineers also have to communicate, manage, innovate

  6. Throttle valve position-detecting device for a vehicle engine

    SciTech Connect (OSTI)

    Minagawa, K.

    1987-08-25

    A throttle valve position-detecting device is described for a vehicle, for detecting the position of a throttle valve in a throttle body provided for an engine mounted on the vehicle, by detecting rotation of a throttle shaft of the throttle valve, and in which the throttle shaft is supported to the throttle body through a bearing. The throttle valve position-detecting device consists of: a first rotary element fixed to the throttle shaft for rotating together with the throttle shaft; a second rotary element contacting the first rotary element for rotating with the first rotary element by receiving rotary power from the first rotary element; spring means for pressing the second rotary element towards the first rotary element against the rotary power; and detecting means for detecting from a rotary position of the second rotary element at least a position of the throttle valve corresponding to an idling condition of the engine; the first and second rotary elements being positioned with such a relationship as a crossing angle of a moving direction of the throttle shaft by clearance between the throttle shaft and the bearing and a transmitting direction of the rotary power from the first rotary element to the second rotary element during the idling condition of the engine being within a range from 45 to 90 degrees.

  7. Clean Cities: Building Partnerships to Reduce Petroleum Use in Transportation (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2012-03-01

    This fact sheet provides an overview of the U.S. Department of Energy's Clean Cities program, which builds partnerships to reduce petroleum use in transportation in communities across the country. The U.S. Department of Energy's Clean Cities initiative advances the nation's economic, environmental, and energy security by supporting local actions to reduce petroleum consumption in transportation. Clean Cities accomplishes this work through the activities of nearly 100 local coalitions. These coalitions provide resources and technical assistance in the deployment of alternative and renewable fuels, idle-reduction measures, fuel economy improvements, and new transportation technologies, as they emerge. Clean Cities overarching goal is to reduce U.S. petroleum use by 2.5 billion gallons per year by 2020. To achieve this goal, Clean Cities employs three strategies: (1) Replace petroleum with alternative and renewable fuels, including natural gas, propane, electricity, ethanol, biodiesel, and hydrogen; (2) Reduce petroleum consumption through smarter driving practices and fuel economy improvements; and (3) Eliminate petroleum use through idle reduction and other fuel-saving technologies and practices.

  8. College of Engineering College of Engineering

    E-Print Network [OSTI]

    College of Engineering College of Engineering Office in Engineering Building, Room 202 (970) 491 UNDERGRADUATE MAJORS Biomedical Engineering Chemical and Biological Engineering Civil Engineering Computer Engineering Electrical Engineering Engineering Science Environmental Engineering Mechanical Engineering

  9. ENVIRONMENTAL ENGINEERING

    E-Print Network [OSTI]

    Walter, M.Todd

    ENVIRONMENTAL ENGINEERING UNDERGRADUATEHANDBOOK #12;Environmental Engineering 2015-2016 2015-16 UNDERGRADUATE HANDBOOK FOR ENVIRONMENTAL ENGINEERING MISSION STATEMENT FOR ENVIRONMENTAL ENGINEERING PROGRAM · Educate the next generation of environmental engineering professionals and assist in the education

  10. Environmental Engineering

    E-Print Network [OSTI]

    Elimelech, Menachem

    ;Beacon for Outstanding Environmental Engineering Education and Research Environmental EngineeringEnvironmental Engineering at the Fall 2014 #12;Environmental Engineering at Yale began in 1998 in environmental, biological, and engineering sciences and guided by the University's global perspective. In 2010

  11. Defining engine efficiency limits

    Broader source: Energy.gov [DOE]

    Investigates the potential to reduce engine efficiency losses and how this impacts the entire system in terms of a direct increase in work output or a change in the loss mechanism.

  12. Introduction Systems Engineering Fundamentals ENGINEERING

    E-Print Network [OSTI]

    Rhoads, James

    Introduction Systems Engineering Fundamentals i SYSTEMS ENGINEERING FUNDAMENTALS January 2001;Systems Engineering Fundamentals Introduction ii #12;Introduction Systems Engineering Fundamentals iii ............................................................................................................................................. iv PART 1. INTRODUCTION Chapter 1. Introduction to Systems Engineering Management

  13. COLLEGE OF ENGINEERING Biological Engineering

    E-Print Network [OSTI]

    Walter, M.Todd

    COLLEGE OF ENGINEERING Biological Engineering Undergraduate Class of 2013 Post-Graduation Report The Department Biological and Environmental Engineering (BEE) offers a bachelor degree program in Biological Engineering and a bachelor degree program in Environmental Engineering. Cornell Career Services surveys

  14. Emission control system and method for internal combustion engine

    SciTech Connect (OSTI)

    Owens, L.

    1980-06-03

    Fresh air is introduced into the exhaust pipe leading to the muffler for an internal combustion engine, while the air and exhaust gas mixture is cooled, not only in the muffler but also in a circuitous tube which extends from the muffler to the normal discharge or tail pipe and in which a special cooler may be installed. From the outlet of the special cooling tube, which faces forwardly, a portion of the air and exhaust gas mixture, now cooled, is led from a Y-connection to the intake tube of the air filter, so that the air and exhaust gas mixture will be introduced into the intake system prior to the carburetor. A rearwardly slanting arm of the Y-connection connects the front end of the special cooling pipe with the normal tail pipe. The carburetor has one or more air bleed tubes leading into the mixture passage at or below the butterfly valves, so that at idling speeds, a small amount of fresh air is introduced, irrespective of the position of the butterfly valves, to overcome any tendency for the engine, when idling, to cough or sputter due to the introduction of an air and exhaust gas mixture to the air filter intake.

  15. Mechanical engineering COLLEGE of ENGINEERING

    E-Print Network [OSTI]

    Berdichevsky, Victor

    Mechanical engineering COLLEGE of ENGINEERING DepartmentofMechanicalEngineering CollegeofEngineering 5050AnthonyWayneDrive Detroit,MI48202 College of engineering t Educating future engineers for 80 years t Home to nation's first electric-drive vehicle engineering program and alternative energy technology

  16. Novel Application of Air Separation Membranes Reduces NOx Emissions...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Emissions Technology available for licensing: Selective permeation of gases using an air separation membrane. Can be retrofitted to existing engines Significantly reduces NOx...

  17. College of Engineering College of Engineering

    E-Print Network [OSTI]

    Connors, Daniel A.

    College of Engineering _______________ 2.7 Page 1 College of Engineering Office in Engineering Siller, Associate Dean UNDERGRADUATE MAJORS Biomedical Engineering Chemical and Biological Engineering Civil Engineering Computer Engineering Electrical Engineering Engineering Science Environmental

  18. College of Engineering College of Engineering

    E-Print Network [OSTI]

    Stephens, Graeme L.

    College of Engineering _______________ 2.8 Page 1 College of Engineering Office in Engineering Professor Thomas Siller, Associate Dean UNDERGRADUATE MAJORS Biomedical Engineering Chemical and Biological Engineering Civil Engineering Computer Engineering Electrical Engineering Engineering Science Environmental

  19. Engineering Prestigious

    E-Print Network [OSTI]

    Saskatchewan, University of

    Engineering Studious Prestigious Adventurous Curious Ambitious Ingenious #12;TheCollegeof Engineering We are committed to innovation in all aspects of engineering education and research. We deliver an accredited professional education program that effectively prepares our students to become engineering

  20. Electrical, Engineering

    E-Print Network [OSTI]

    School of Electrical, Computer and Energy Engineering 2009-2010 Annual Report #12;Organizational Structure for Ira A. Fulton Schools of Engineering Schools (Director) Lead These Engineering Undergraduate Degree Programs Coordinate Across Engineering for These Grand Challenge Areas... Biological & Health

  1. Electrical + Engineering

    E-Print Network [OSTI]

    Cafarella, Michael J.

    Electrical + Computer Engineering Electrical + Computer Engineering 2013 PROFILE PEOPLE Faculty Students Electrical Engineering - 330 Computer Engineering - 224 Graduate Students EE and EE:Systems MSE - 301 EE and EE:Systems PhD - 296 Degrees Awarded Electrical Engineering BSE - 123 Computer Engineering

  2. Terry Fuller Engineering

    E-Print Network [OSTI]

    Gelfond, Michael

    Terry Fuller Petroleum Engineering Research Building Terry Fuller Petroleum Engineering Research Building Construction Engineering and Engineering Technology Construction Engineering and Engineering Technology Industrial Engineering Industrial Engineering Engineering Center Engineering Center Computer

  3. Reduces electric energy consumption

    E-Print Network [OSTI]

    BENEFITS · Reduces electric energy consumption · Reduces peak electric demand · Reduces natural gas consumption · Reduces nonhazardous solid waste and wastewater generation · Potential annual savings products for the automotive industry, electrical equipment, and miscellaneous other uses nationwide. ALCOA

  4. College of Engineering and Science ENGINEERING AND

    E-Print Network [OSTI]

    Bolding, M. Chad

    Engineering, Industrial Engineering, and Mechanical Engineering are each accredited by the Engineering87 College of Engineering and Science COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering educational oppor- tunities. The innovative combination of engineering and science disciplines that comprises

  5. College of Engineering and Science ENGINEERING

    E-Print Network [OSTI]

    Stuart, Steven J.

    58 College of Engineering and Science 58 COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers advanced degrees in Automotive Engineering, Bioengineering, Biosystems Engineering, Chemi- cal Engineering, Chemistry, Civil Engineering, Computer Engineering, Computer Science

  6. College of Engineering and Science ENGINEERING

    E-Print Network [OSTI]

    Stuart, Steven J.

    College of Engineering and Science COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers advanced degrees in Automotive Engineering, Bioengineering, Biosystems Engineering, Chemi- cal Engineering, Chemistry, Civil Engineering, Computer Engineering, Computer Science, Digital

  7. College of Engineering and Science ENGINEERING

    E-Print Network [OSTI]

    Stuart, Steven J.

    35 College of Engineering and Science COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers advanced degrees in Automotive Engineering, Bio- engineering, Biosystems Engineering, Chemical En- gineering, Chemistry, Civil Engineering, Computer Engineering, Computer Science, Digital

  8. College of Engineering and Science ENGINEERING

    E-Print Network [OSTI]

    Stuart, Steven J.

    College of Engineering and Science COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers advanced degrees in Automotive Engineering, Bio- engineering, Biosystems Engineering, Chemical En- gineering, Chemistry, Civil Engineering, Computer Engineering, Computer Science, Digital

  9. College of Engineering and Science ENGINEERING

    E-Print Network [OSTI]

    Stuart, Steven J.

    35 College of Engineering and Science COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers advanced degrees in Automotive Engineering, Bioengineering, Biosystems Engineering, Chemi- cal Engineering, Chemistry, Civil Engineering, Computer Engineering, Computer Science, Digital

  10. College of Engineering and Science ENGINEERING

    E-Print Network [OSTI]

    Bolding, M. Chad

    College of Engineering and Science COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers advanced degrees in Automotive Engineering, Bioengineering, Biosystems Engineering, Chemical Engineering, Chemistry, Civil Engineering, Com- puter Engineering, Computer Science, Digital Pro

  11. Interdisciplinary: Chemical Engineer/Mechanical Engineer (Pathways...

    Energy Savers [EERE]

    Interdisciplinary: Chemical EngineerMechanical Engineer (Pathways Recent Graduate Program) Interdisciplinary: Chemical EngineerMechanical Engineer (Pathways Recent Graduate...

  12. Engineering BSc Civil Engineering

    E-Print Network [OSTI]

    Karlsson, Brynjar

    of civil engineering works include bridges, buildings, dams, airports, highways, tunnels, and water and management, based on their knowledge and understanding of the basic theories of the above listed subjects

  13. Biodiesel Outlook- An Engine Manufacturer's Perspective

    Office of Energy Efficiency and Renewable Energy (EERE)

    The engine's fuel systems and the fuels they deliver are increasingly critical to the overall performance as engines change to reduce levels of both regulated and non-regulated emissions.

  14. college of engineering Undergraduate

    E-Print Network [OSTI]

    and computer engineering » environmental engineering » industrial engineering » Manufacturing engineering » electrical and computer engineering » engineering Management* » environmental engineering » industrial engineering (ce) and construction engineering management (ceM). industry placement for ceM graduates regularly

  15. Terry Fuller Engineering

    E-Print Network [OSTI]

    Gelfond, Michael

    Terry Fuller Petroleum Engineering Research Building Terry Fuller Petroleum Engineering Research Marsha Sharp Center for Student Athletics Construction Engineering and Engineering Technology Construction Engineering and Engineering Technology Industrial Engineering Industrial Engineering Engineering

  16. electrical, engineering

    E-Print Network [OSTI]

    school of electrical, computer and energy engineering Annual Report 2012-2013 Breaking the final systems engineering Marco Santello, School Director enrollment 930 undergraduate 771 graduate 159 DEGREE PROGRAM biomedical engineering (Harrington Bioengineering program) school of computing, informatics

  17. Electromechanical Engineering

    E-Print Network [OSTI]

    Berdichevsky, Victor

    Electromechanical Engineering Technology The Division of Engineering of Governors Interdisciplinary. The best of both worlds... Electromechanical.et.eng.wayne.edu Division of Engineering Technology Bachelors of Science in Electromechanical

  18. ENGINEERING UNDERGRADUATE

    E-Print Network [OSTI]

    Walter, M.Todd

    ENGINEERING UNDERGRADUATE HANDBOOK Fall 2013 #12;Name: ____________________________________________________ E-mail: ____________________________________________________ College of Engineering Cornell University ABET Accredited Programs for 2013­14 ABET (Accreditation Board for Engineering and Technology

  19. Engineering Why engineering at Sussex?

    E-Print Network [OSTI]

    Sussex, University of

    (Hons) in Automotive Engineering (with an industrial placement year) BEng (Hons) in Automotive Engineering BEng (Hons) in Automotive Engineering (with an industrial placement year) MEng (Hons) in Computer Engineering MEng (Hons) in Computer Engineering (with an industrial placement year) BEng (Hons) in Computer

  20. College of Engineering Engineering in

    E-Print Network [OSTI]

    Lin, Zhiqun

    College of Engineering Engineering in Social Context Jonathan Wickert Dean of Engineering #12;College of Engineering Game changers of the 20th century ... · Electrification · Automobile · Airplane optics · Nuclear technologies · High-performance materials #12;College of Engineering ... and of the 21st

  1. Engine construction

    SciTech Connect (OSTI)

    Dillon, C.L.

    1984-03-06

    An engine has at least two piston-cylinder assemblies each comprising a cylinder formed in an engine block with a cylinder head and a piston therein in sliding relationship toward and away from the head, a piston rod operatively connected to the piston and to a crankshaft, motion producing member of shape-memory material, e.g. Nitinol, having a transformation temperature range, secured to the cylinder head and the side of the piston opposite from the connecting rod, the motion producing member having a heat treated high temperature extended shape memory position and a low temperature low energy compressed position, the Nitinol member being of hollow tubular form and having pressure and return hoses connected thereto for supplying and removing cooling fluid into and from the Nitinol member, an electrical heating device connected to the Nitinol member, whereby the Nitinol member is easily compressed with relatively little force from the extended shape memory position to the compressed position when cooling fluid is supplied thereto to reduce the temperature of the Nitinol member to or below the lower limit of the transformation temperature range and the Nitinol member is automatically extended with relatively great force from the compressed position to the shape memory position when heated by the heating device to or above the upper limit of the transformation temperature range.

  2. POSTGRADUATE ENGINEERING

    E-Print Network [OSTI]

    Selvadurai, Selvakennedy

    D researcher Abolghasem Naghib working in the Civil Engineering Fluids laboratory #12;2 OUR POSTGRADUATE research is multidisciplinary and centres on: ­ robotics ­ biomedical engineering and technology ­ clean

  3. Chief Engineer

    Broader source: Energy.gov [DOE]

    A successful candidate in this position will provide engineering expertise and guidance to multidiscipline engineering and scientific elements throughout the Office of River Protection and is a...

  4. Faculty of Engineering & Design Civil Engineering

    E-Print Network [OSTI]

    Burton, Geoffrey R.

    Faculty of Engineering & Design Civil Engineering Chemical Engineering Electronic & Electrical Engineering Integrated Mechanical & Electrical Engineering Mechanical Engineering Industrial Placements #12 the practical application behind the theory I have learnt in my first two years studying Civil Engineering

  5. College of Engineering and Science ENGINEERING

    E-Print Network [OSTI]

    Stuart, Steven J.

    , Hydrogeology, Industrial Engineering, Materials Science and Engineering, Mathematical Sciences, MechanicalCollege of Engineering and Science COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers advanced degrees in Automotive Engineering, Bioengineering, Biosystems Engineering, Chemi

  6. Faculty of Engineering & Design Civil Engineering

    E-Print Network [OSTI]

    Burton, Geoffrey R.

    the requirements of engineers in an aeronautical field. Technical knowledge from university gave me a goodFaculty of Engineering & Design Civil Engineering Chemical Engineering Electronic & Electrical Engineering Integrated Mechanical & Electrical Engineering Mechanical Engineering Industrial Placements #12

  7. Industrial engineering study of tank farm access qualifications and validations

    SciTech Connect (OSTI)

    Sterling, S.G., Westinghouse Hanford

    1996-07-01

    Engineering study of alternatives to reduce costs of validation worker`s qualification prior to Tank Farm area access.

  8. Understanding diesel engine lubrication at low temperature

    SciTech Connect (OSTI)

    Smith, M.F. Jr.

    1990-01-01

    This paper reports on oil pumpability in passenger car gasoline engines that was well-characterized by an ASTM program and by individual researchers in the 1970's and early 1980's. oil pumpability in diesel engines however, was not investigated to any significant extent until the mid-1980's. This study was initiated to define the performance of several commercial viscosity modifiers in different formulations containing 3 detergent-inhibitor (DI) additive packages and 4 basestock types. The test oils were run at {minus}18{degrees} C (0{degrees} F) in a Cummins NTC-400 diesel engine. The results, when statistically analyzed, indicated that a new, second generation olefin copolymer (OCP) viscosity modifier has better performance that a first generation OCP and, furthermore, had performance equal to a polymethacrylate (PMA) viscosity modifier. The analysis also showed that one DI/base stock combination had a significant effect on performance. The apparent shear rate of the oil in the pump inlet tube was calculated from the oil pump flow rate measured at idle speed at low temperature and the pump inlet tube diameter. The shear rate and oil viscosity were used to estimate the shear stress in the pump inlet tube. The shear stress level of the engine is 56% higher than the Mini-Rotary Viscometer (MRV). Hence, the current MRV procedure is rheologically unsuitable to predict pumpability in a large diesel engine. A new device was developed for measuring the oil film thickness in the turbocharge bearing and noting the time when a full oil film is formed. Results indicate that a full oil film occurs almost immediately, well before any oil pressure is observed at the turbocharge inlet. Residual oil remaining in the bearing after shutdown may account of this observation. The oil film maintained its thickness both before, and after the first indication of oil pressure. More work is needed to study this effect.

  9. Engineering Careers: Software Engineering

    E-Print Network [OSTI]

    Fenster, Sam

    Analysis HR, Payroll, Inventory Control #12;Custom software Help run my business Online banking High it #12;It is "professional" programing Software Engineering hacking up some code It is not what you do day #12;I am part of a team Programmers + Product Managers + Business Managers #12;You're stifling me

  10. Hydrogen engine and combustion control process

    DOE Patents [OSTI]

    Swain, Michael R. (Coral Gables, FL); Swain, Matthew N. (Miami, FL)

    1997-01-01

    Hydrogen engine with controlled combustion comprises suction means connected to the crankcase reducing or precluding flow of lubricating oil or associated gases into the combustion chamber.

  11. Undergraduate Engineering

    E-Print Network [OSTI]

    Bristol, University of

    -group teaching and a good team spirit Working at Lotus Formula 1, I often design a race car component on MondayUndergraduate Engineering Design Faculty of Engineering #12;bristol.ac.uk/study If you have broad engineering interests, are ambitious and would like to run large engineering projects such as space

  12. Undergraduate Engineering

    E-Print Network [OSTI]

    Bristol, University of

    in Formula One is watching a race car I worked on overtake one that I didn't. Joăo MEng in Aeronautical Engineering with Study Abroad, 2011 Aerodynamicist for McLaren Racing Why study aerospace engineeringUndergraduate Aerospace Engineering Faculty of Engineering #12;bristol.ac.uk/study If you enjoy

  13. ENGINEERING ATILLINOISTECH

    E-Print Network [OSTI]

    Heller, Barbara

    ENGINEERING BEITALL ATILLINOISTECH Create. Discover. Follow Your Passion. A R M O U R C O L L E G E O F E N G I N E E R I N G #12;DEPARTMENT OF BIOMEDICAL ENGINEERING · Degree programs in cell and tissue engineering, medical imaging, and neural engineering These are exciting times for biomedical

  14. ENVIRONMENTAL ENGINEERING

    E-Print Network [OSTI]

    ENVIRONMENTAL ENGINEERING www.cee.pdx.edu What do environmental engineers do? Civil and Environmental Engineering (CEE) is an exciting, challenging, and dynamic field that is critical to our quality of life. Environmental engineers help manage and protect natural resources like water supplies as well

  15. college of engineering Undergraduate

    E-Print Network [OSTI]

    Tullos, Desiree

    and computer engineering » environmental engineering » industrial engineering » international Studies » industrial engineering » Materials Science » Mechanical engineering » Medical Physics » nuclear engineering degrees in civil engineering (ce) and construction engineering management (ceM). industry placement for ce

  16. Stirling engines

    SciTech Connect (OSTI)

    Reader, G.T.; Hooper

    1983-01-01

    The Stirling engine was invented by a Scottish clergyman in 1816, but fell into disuse with the coming of the diesel engine. Advances in materials science and the energy crisis have made a hot air engine economically attractive. Explanations are full and understandable. Includes coverage of the underlying thermodynamics and an interesting historical section. Topics include: Introduction to Stirling engine technology, Theoretical concepts--practical realities, Analysis, simulation and design, Practical aspects, Some alternative energy sources, Present research and development, Stirling engine literature.

  17. Engine combustion control at low loads via fuel reactivity stratification

    DOE Patents [OSTI]

    Reitz, Rolf Deneys; Hanson, Reed M; Splitter, Derek A; Kokjohn, Sage L

    2014-10-07

    A compression ignition (diesel) engine uses two or more fuel charges during a combustion cycle, with the fuel charges having two or more reactivities (e.g., different cetane numbers), in order to control the timing and duration of combustion. By appropriately choosing the reactivities of the charges, their relative amounts, and their timing, combustion can be tailored to achieve optimal power output (and thus fuel efficiency), at controlled temperatures (and thus controlled NOx), and with controlled equivalence ratios (and thus controlled soot). At low load and no load (idling) conditions, the aforementioned results are attained by restricting airflow to the combustion chamber during the intake stroke (as by throttling the incoming air at or prior to the combustion chamber's intake port) so that the cylinder air pressure is below ambient pressure at the start of the compression stroke.

  18. Engineering by Design Ocean Engineering

    E-Print Network [OSTI]

    Virginia Tech

    Engineering by Design Ocean Engineering Bachelor of Science Degree Virginia Tech For more engineering is a diverse field. At Virginia Tech, the major focus areas are ocean energy systems and ocean in the aerospace and related industries and in the shipbuilding, naval engineering, and ship design fields. Some

  19. College of Engineering EGR Engineering

    E-Print Network [OSTI]

    MacAdam, Keith

    College of Engineering EGR Engineering KEY: # = new course * = course changed = course dropped University of Kentucky 2013-2014 Undergraduate Bulletin 1 EGR 101 INTRODUCTION TO ENGINEERING. (4) This course introduces the engineering profession and the skills and expectations required for success

  20. Faculty of Engineering Aerospace Engineering

    E-Print Network [OSTI]

    Faculty of Engineering Aerospace Engineering Canada's aerospace industry is one of the largest. One of the key factors that will continue this success is a steady stream of engineering talent.uwindsor.ca/mame Rigorous, Enriching Programs Our new Aerospace Engineering program at Windsor is an optional stream within

  1. WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED,

    E-Print Network [OSTI]

    . Removed grit and sludge are mixed with the waste oil. Photon-counting spectrofluorimeter Substitution 54 or composted at the stump dump. Plant Engineering grounds vehicle wash system * Waste minimization 8,000 OilsWASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED, REUSED, RECYCLED OR CONSERVED IN 2007 WASTE TYPE

  2. SATURATION COMPENSATING INPUT SHAPERS FOR REDUCING VIBRATION

    E-Print Network [OSTI]

    Singhose, William

    input shaper and feedback controller was successfully implemented by Drapeau and Wang on a five-bar The Woodruff School of Mechanical Engineering Georgia Institute of Technology Atlanta, GA 30332, USA ABSTRACT Input shaping can be used to eliminate or greatly reduce residual vibration of flexible mechanical

  3. Industrial & Systems Engineering Areas of Engineering Interests

    E-Print Network [OSTI]

    Berdichevsky, Victor

    selected in Biomedical, Civil and Environmental, Electrical and Mechanical Engineering are thoseIndustrial & Systems Engineering Areas of Engineering Interests The Department of Industrial and Systems Engineering understands our students may work as Industrial Engineers in other engineering

  4. BIOMEDICAL ENGINEERING CHEMICAL AND BIOLOGICAL ENGINEERING

    E-Print Network [OSTI]

    Heller, Barbara

    BIOMEDICAL ENGINEERING CHEMICAL AND BIOLOGICAL ENGINEERING CIVIL, ARCHITECTURAL, AND ENVIRONMENTAL ENGINEERING ELECTRICAL AND COMPUTER ENGINEERING MECHANICAL, MATERIALS, AND AEROSPACE ENGINEERING COLLEGE OF ENGINEERING IIT ARMOUR #12;WHY ENGINEERINGAT IIT ARMOUR? Five Departments. One Distinctive Educational

  5. SCHOOL OF ENGINEERING TECHNOLOGY Surveying Engineering

    E-Print Network [OSTI]

    Thomas, Andrew

    SCHOOL OF ENGINEERING TECHNOLOGY Surveying Engineering Technology practice FOCUSED WHY SURVEYING ENGINEERING TECHNOLOGY? Surveying engineering technology is a practice- focused program that provides students ENGINEERING TECHNOLOGY DEGREE? A graduate with a surveying engineering technology degree can work as a party

  6. CollegeofEngineering College of Engineering

    E-Print Network [OSTI]

    Illinois at Chicago, University of

    Engineering, Neural Engineering, Bioinformatics and Genomics, and Nanobiomolecular Engineering targeting and transport, biotransduc- tion, imaging and inducible bioactivity, computational genomics

  7. School of Engineering Mechanical, Aerospace & Nuclear Engineering

    E-Print Network [OSTI]

    McLaughlin, Joyce R.

    School of Engineering Mechanical, Aerospace & Nuclear Engineering Undergraduate Handbook CLASS OF MECHANICAL, AEROSPACE AND NUCLEAR ENGINEERING (MANE) ................................................1 MANE .............................................................................................................................................................1 CAREERS IN ENGINEERING

  8. E85 Optimized Engine

    SciTech Connect (OSTI)

    Stanley Bower

    2011-12-31

    A 5.0L V8 twin-turbocharged direct injection engine was designed, built, and tested for the purpose of assessing the fuel economy and performance in the F-Series pickup of the Dual Fuel engine concept and of an E85 optimized FFV engine. Additionally, production 3.5L gasoline turbocharged direct injection (GTDI) â??EcoBoostâ?ť engines were converted to Dual Fuel capability and used to evaluate the cold start emissions and fuel system robustness of the Dual Fuel engine concept. Project objectives were: to develop a roadmap to demonstrate a minimized fuel economy penalty for an F-Series FFV truck with a highly boosted, high compression ratio spark ignition engine optimized to run with ethanol fuel blends up to E85; to reduce FTP 75 energy consumption by 15% - 20% compared to an equally powered vehicle with a current production gasoline engine; and to meet ULEV emissions, with a stretch target of ULEV II / Tier II Bin 4. All project objectives were met or exceeded.

  9. EnginEEring ZonE "The Engineering Zone

    E-Print Network [OSTI]

    Tobar, Michael

    EnginEEring ZonE "The Engineering Zone will push the limits in collaborative learning and research, and empower people to change the world. "Winthrop Professor John Dell Dean, Faculty of Engineering, Computing and Mathematics #12;2 | nEw CEntury Campaign ­ EnginEEring ZonE #12;nEw CEntury Campaign ­ EnginEEring ZonE | 3

  10. & Mechanical Engineering

    E-Print Network [OSTI]

    Zhou, Chongwu

    AME Aerospace & Mechanical Engineering #12;Aerospace and Mechanical Engineers design complex mechanical, thermal, uidic, acoustical, optical, and electronic systems, with characteristic sizes ranging and far underground, to near-Earth, planetary, interplanetary and galactic space. Aerospace and Mechanical

  11. Advanced Natural Gas Reciprocating Engine(s)

    SciTech Connect (OSTI)

    Kwok, Doris; Boucher, Cheryl

    2009-09-30

    Energy independence and fuel savings are hallmarks of the nation’s energy strategy. The advancement of natural gas reciprocating engine power generation technology is critical to the nation’s future. A new engine platform that meets the efficiency, emissions, fuel flexibility, cost and reliability/maintainability targets will enable American manufacturers to have highly competitive products that provide substantial environmental and economic benefits in the US and in international markets. Along with Cummins and Waukesha, Caterpillar participated in a multiyear cooperative agreement with the Department of Energy to create a 50% efficiency natural gas powered reciprocating engine system with a 95% reduction in NOx emissions by the year 2013. This platform developed under this agreement will be a significant contributor to the US energy strategy and will enable gas engine technology to remain a highly competitive choice, meeting customer cost of electricity targets, and regulatory environmental standard. Engine development under the Advanced Reciprocating Engine System (ARES) program was divided into phases, with the ultimate goal being approached in a series of incremental steps. This incremental approach would promote the commercialization of ARES technologies as soon as they emerged from development and would provide a technical and commercial foundation of later-developing technologies. Demonstrations of the Phase I and Phase II technology were completed in 2004 and 2008, respectively. Program tasks in Phase III included component and system development and testing from 2009-2012. Two advanced ignition technology evaluations were investigated under the ARES program: laser ignition and distributed ignition (DIGN). In collaboration with Colorado State University (CSU), a laser ignition system was developed to provide ignition at lean burn and high boost conditions. Much work has been performed in Caterpillar’s DIGN program under the ARES program. This work has consisted of both modeling and single cylinder engine experiments to quantify DIGN performance. The air handling systems of natural gas engines dissipate a percentage of available energy as a result of both flow losses and turbomachinery inefficiencies. An analytical study was initiated to increase compressor efficiency by employing a 2-stage inter-cooled compressor. Caterpillar also studied a turbo-compound system that employs a power turbine to recover energy from the exhaust gases for improved engine efficiency. Several other component and system investigations were undertaken during the final phase of the program to reach the ultimate ARES goals. An intake valve actuation system was developed and tested to improve engine efficiency, durability and load acceptance. Analytical modeling and materials testing were performed to evaluate the performance of steel pistons and compacted graphite iron cylinder head. Effort was made to improve the detonation sensing system by studying and comparing the performance of different pressure sensors. To reduce unburned hydrocarbon emissions, different camshafts were designed and built to investigate the effect of exhaust valve opening timing and value overlap. 1-D & 3-D coupled simulation was used to study intake and exhaust manifold dynamics with the goal of reducing load in-balance between cylinders. Selective catalytic reduction with on-board reductant generation to reduce NOx emissions was also engine tested. An effective mean to successfully deploy ARES technologies into the energy markets is to deploy demonstration projects in the field. In 2010, NETL and Caterpillar agreed to include a new “opportunity fuel” deliverable and two field demonstrations in the ARES program. An Organic Rankine Cycle system was designed with production intent incorporating lessons learned from the Phase II demonstration. Unfortunately, business conditions caused Caterpillar to cancel this demonstration in 2011. Nonetheless, Caterpillar partnered with a local dealer to deploy an ARES class engine using syngas from a biomass gasifier as

  12. Value Engineering

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2002-12-30

    To establish Department of Energy (DOE) value engineering policy that establishs and maintains cost-effective value procedures and processes.

  13. Biomedical Engineering

    E-Print Network [OSTI]

    Anderson, Charles W.

    , Biochemistry, Neurobiology #12;Biomedical Engineering Dual Bachelor's Degree Starting Fall 2011, CSU will offer#12;Biomedical Engineering Dr. Kevin Lear, Director, Undergraduate Program Ms. Brett Eppich Beal, Adviser 5280 CSU Engineering Showcase January 29, 2011 #12;SBME ­ Who are We? Director ­ Stuart Tobet

  14. ENGINEERING & INFORMATION

    E-Print Network [OSTI]

    Viglas, Anastasios

    of electricity grids using utility power electronics, electrical energy storage and generation with sustainable research rePOrT 2011 #12;contents 03 Welcome 04 Telecommunications engineering 12 Power engineering 16 and an ausgrid-funded chair of power engineering. all three are Ieee fellows. In addition, the school has another

  15. ENGINEERING REGISTRATION

    E-Print Network [OSTI]

    Saskatchewan, University of

    ENGINEERING FIRST YEAR REGISTRATION GUIDE WORDS AND PHRASES CRN ­ COURSE REFERENCE NUMBER Each for the class. FIRST YEAR COMMON CORE College of Engineering students in their first year register in a common.usask.ca/registration 2 COMMON FIRST YEAR CORE COURSES The common set of classes all first-year Engineering students take

  16. Engineering Entrepreneurship

    E-Print Network [OSTI]

    Saskatchewan, University of

    Engineering Entrepreneurship Option (EEO) #12;Why Entrepreneurship? · For-profit and non are delivered in the Edwards School of Business · The capstone course, (GE 430.0 Engineering Entrepreneurship Capstone) is taught in the College of Engineering · Students add one course per term in third and fourth

  17. University , Engineering

    E-Print Network [OSTI]

    Zakharov, Leonid E.

    , Princeton Plasma Physics Laboratory Presented at Seminar of Department of Nuclear Engineering Massachusetts{AC020{76{CHO{3073. Leonid E. Zakharov, Department of Nuclear Engineering, MIT , Feb.26, 2001, Cambridge acting on the guide wall. This design concept opens opportunities for nuclear engineers and technologists

  18. ENGINEERING INTERNATIONAL

    E-Print Network [OSTI]

    University of Technology, Sydney

    COURSE GUIDE 2013 UTS: ENGINEERING INTERNATIONAL UNDERGRADUATE w w w.eng.uts.edu.au #12;2 / ENGINEERING IN AUSTRALIA Internationally, Australian universities have a reputation for high quality research developed close links with many international institutions, particularly in Asia. ENGINEERING IN SYDNEY

  19. Rotary engine

    SciTech Connect (OSTI)

    Smith, T.A.

    1992-01-28

    This patent describes an improved rotary engine. It comprises an annular master cylinder composed of a cylindrical housing, a continuous hollow outer concentric shaft, an outward end housing and an inward end housing; means to form a dynamically balanced disc piston assembly extending from the the outward end housing to the the inward end housing thereby dividing the the annular master cylinder into at least three separate gas tight cylinders formed by rotating discs, each cylinder having at least two pistons independently rotatable therein; means to isolate the unexpanded gases from any exit path into the housing of the piston controlling means; and wherein one of the pistons in each cylinder is connected directly to the the continuous outer concentric shaft to form a first piston assembly, the other of the pistons in each cylinder is connected to the discs which are connected to the end of an inner concentric shaft to form a second piston assembly, means for controlling the piston action by a common eccentric shaft such that as the pistons rotate they expand and reduce the distance between them thereby changing the volume between the pistons within each of the cylinders.

  20. Engineering, Architecture & Technology

    E-Print Network [OSTI]

    Engineering, Architecture & Technology Chemistry Engineering and Engineering Sciences Mathematics ECEN 3714 ECEN 4133 IEM 3503 MAE 3123 MAE 3223 EET 1244 BIOC 3713 Chemistry Engineering and Engineering Sciences Mathematics Physics Other Chemistry Engineering and Engineering Sciences Mathematics Physics Other

  1. 112 COLLEGE OF ENGINEERING AND ENGINEERING TECHNOLOGY College of Engineering and Engineering

    E-Print Network [OSTI]

    Kostic, Milivoje M.

    112 COLLEGE OF ENGINEERING AND ENGINEERING TECHNOLOGY College of Engineering and Engineering requirements in interdisciplinary studies, engineering majors need only one interdisciplinary studies course of Engineering and Engineering Technology offer baccalaureate programs leading to the degree Bachelor of Science

  2. Computational modelling in chemical engineering

    E-Print Network [OSTI]

    Kraft, Markus

    2008-08-27

    Dynamic Gauging DNS of a flame kernel Flow in a oscillatory flow reactor. Pom-Pom equation for polydisperse polystyren Markus Kraft mk306@cam.ac.uk Engine optimisation •Increase Efficiency reduce carbon dioxide •Reduce Emission soot,NOx, unburnt...

  3. Development and Demonstration of a Fuel-Efficient HD Engine (DOE SuperTruck Program)

    Broader source: Energy.gov [DOE]

    Discusses engine efficiency contributions of enhanced fuel injection rematched to new piston geometry, improved charge air system, revised base engine components reduce friction and turbocompounding

  4. Assessment of propfan propulsion systems for reduced environmental impact

    E-Print Network [OSTI]

    Peters, Andreas, Ph. D. Massachusetts Institute of Technology

    2010-01-01

    Current aircraft engine designs tend towards higher bypass ratio, low-speed fan designs for improved fuel burn, reduced emissions and noise. Alternative propulsion concepts include counter-rotating propfans (CRPs) which ...

  5. Knock-free engine control system for turbocharged automotive engine

    SciTech Connect (OSTI)

    Hirabayashi, Y.

    1985-04-09

    In a turbocharged internal combustion engine, in order to optimize engine torque output spark timing control and boost pressure control are coordinated in such a manner that spark advance angle is adjusted only when the measured boost pressure equals a predetermined value and is allowed to vary only within a specified range advanced from a reference value derived from an empirical memory table on the basis of engine speed and boost pressure. When engine operating conditions are such that spark advance angle would fall outside of the specified range, spark advance angle is then held at the empirical value and boost pressure is adjusted in order to optimize engine torque. The coordinated control system can also be designed to respond to exhaust gas temperature on a first-priority basis, i.e., when exhaust temperature is sensed to be dangerously high, boost pressure is reduced regardless of other engine conditions.

  6. Petroleum Engineering 410 Production Engineering

    E-Print Network [OSTI]

    Description: Fundamental production engineering design, evaluation, and optimization of oil and gas producing Be able to evaluate near wellbore problems in oil and gas well production, identify the problems cause40 Petroleum Engineering 410 Production Engineering Credit 3: (3-0) Required for Seniors Catalog

  7. Saving Fuel, Reducing Emissions

    E-Print Network [OSTI]

    Kammen, Daniel M.; Arons, Samuel M.; Lemoine, Derek M.; Hummel, Holmes

    2009-01-01

    regenerative braking, as do Saving Fuel, Reducing Emissionsconditions, the expected savings in fuel costs are notis whether the fuel cost savings over the lifetime of the

  8. Saving Fuel, Reducing Emissions

    E-Print Network [OSTI]

    Kammen, Daniel M.; Arons, Samuel M.; Lemoine, Derek M.; Hummel, Holmes

    2009-01-01

    would in turn lower PHEV fuel costs and make them morestretches from fossil-fuel- powered conventional vehiclesbraking, as do Saving Fuel, Reducing Emissions Making Plug-

  9. Mathematics and Engineering Mathematics & Engineering Orientation Evening

    E-Print Network [OSTI]

    Wehlau, David

    Mathematics and Engineering Mathematics & Engineering Orientation Evening Thursday, January 29, 2015 WELCOME! #12;Mathematics & Engineering Orientation Program Thursday, January 29, 2015 1. Program Presentation · Welcome · What is Mathematics & Engineering ? · Why Mathematics & Engineering ? · Program

  10. Biomedical Engineering Biomedical engineering integrates physical, chemical,

    E-Print Network [OSTI]

    Biomedical Engineering Biomedical engineering integrates physical, chemical, mathematical sciences and engineering principles for the study of biology, medicine, behavior, or health. Biomedical engineering, and for improving health. Biomedical engineers design and develop devices and procedures that solve medical

  11. Chemical and Petroleum Engineering Petroleum Engineering Minor

    E-Print Network [OSTI]

    Chemical and Petroleum Engineering Petroleum Engineering Minor Students pursuing a BSc in Mechanical Engineering or Chemical Engineering can broaden their skills by taking a minor in petroleum engineering. Energy is the largest

  12. Whitacre College of Engineering Industrial Engineering Department

    E-Print Network [OSTI]

    Gelfond, Michael

    Whitacre College of Engineering Industrial Engineering Department Department Chair and Professor of Industrial Engineering. The Industrial Engineering Department at Texas Tech University has a distinguished industrial engineering education and provide appropriate service to the department, university

  13. Dept. of Mechanical Engineering 1500 Engineering Dr.

    E-Print Network [OSTI]

    Sheridan, Jennifer

    Dept. of Mechanical Engineering 1500 Engineering Dr. University of Wisconsin ­ Madison Madison, WI. of Mechanical Engineering 2008 ­ Present Director of Engine Research Center 2003 ­ 2007 Associate Professor ­ 1995 Research Assistant Stanford University, Stanford, CA 1984 ­ 1989 Research Engineer Flow Research

  14. College of Engineering ME Mechanical Engineering

    E-Print Network [OSTI]

    MacAdam, Keith

    College of Engineering ME Mechanical Engineering KEY: # = new course * = course changed = course ENGINEERING. (3) This course introduces the Mechanical Engineering profession including the skills and expectations required for success. Engineering applications of calculus are also presented. Prereq or concur

  15. Engineering BSc -180 ECTS programs -emphasis on preparation for further studies at MSc/PhD level Financial Engineering Engineering Management Biomedical Engineering Mechatronics Engineering Mechanical Engineering

    E-Print Network [OSTI]

    Karlsson, Brynjar

    Financial Engineering Engineering Management Biomedical Engineering Mechatronics Engineering Mechanical-HEIL Physics III T-411-MECH Mechatronics I T-536-RENN Fluid Dynamics **Engineering course **Engineering

  16. Optimal rotary control of the cylinder wake using POD Reduced Order Model

    E-Print Network [OSTI]

    Bergmann, Michel

    Optimal rotary control of the cylinder wake using POD Reduced Order Model Michel Bergmann, Laurent frequently in engineering computations) obtained by spatial discretization of the governing equations need

  17. Bioenvironmental Engineering

    E-Print Network [OSTI]

    Neimark, Alexander V.

    in a variety of environmental engineering fields including air pollution control, bioremediation, renewable energy generation, stormwater treatment, and water and wastewater treatment. Employers include

  18. Rotary engine

    SciTech Connect (OSTI)

    Leas, A. M.; Leas, L. E.

    1985-02-12

    Disclosed are an engine system suitable for use with methyl alcohol and hydrogen and a rotary engine particularly suited for use in the engine system. The rotary engine comprises a stator housing having a plurality of radially directed chamber dividers, a principal rotor, a plurality of subordinate rotors each having an involute gear in its periphery mounted on the principal rotor, and means for rotating the subordinate rotors so that their involute gears accept the radially directed dividers as the subordinate rotors move past them.

  19. ENGINEERING Professional Organizations

    E-Print Network [OSTI]

    Acton, Scott

    ENGINEERING Professional Organizations: National Society of Professional Engineers (NSPE) Virginia Society of Professional Engineers (VSPE) American Society of Civil Engineers (ASCE) American Society of Mechanical Engineers (ASME) Institute of Electrical and Electronics Engineers (IEEE) American Institute

  20. Industrial and Systems engineering

    E-Print Network [OSTI]

    Berdichevsky, Victor

    Industrial and Systems engineering COLLEGE of ENGINEERING DepartmentofIndustrialandSystemsEngineering EDGE Engineering Entrepreneur Certificate Program is a great addition to an industrial and systems to expert clinical recommendations. engineering.wayne.edu/isefaculty Industrial and systems engineering

  1. COLLEGE OF ENGINEERING Undergraduate

    E-Print Network [OSTI]

    & DEPARTMENTS Chemical, Biological & Environmental Engineering The school is a leader in innovative education, biological, and environmental engineering principles. With a commitment to educating career-ready graduates and Computer Engineering » Environmental Engineering » Industrial Engineering » Manufacturing Engineering

  2. CHEMICAL ENGINEERING AND MANUFACTURING CHEMICAL ENGINEERING

    E-Print Network [OSTI]

    Provancher, William

    CHEMICAL ENGINEERING AND MANUFACTURING CHEMICAL ENGINEERING Objective Chemical Engineers of chemicals. This lesson introduces students to one component of chemical engineering: food processing, and a chemical engineer 2. How chemical engineers are involved in food production 3. That chemical engineers need

  3. Biomedical Engineering Department of Biomedical Engineering

    E-Print Network [OSTI]

    Biomedical Engineering Department of Biomedical Engineering Wishnick Hall 3255 S. Dearborn Chicago of Biomedical Engineering confers a doctoral degree in biomedical engineering (Ph.D. in Biomedical Engineering with engineering backgrounds can receive a Ph.D. in Biomedical Engineering at IIT and an M.D. from the University

  4. Modular Aneutronic Fusion Engine

    SciTech Connect (OSTI)

    Gary Pajer, Yosef Razin, Michael Paluszek, A.H. Glasser and Samuel Cohen

    2012-05-11

    NASA's JUNO mission will arrive at Jupiter in July 2016, after nearly five years in space. Since operational costs tend to rise with mission time, minimizing such times becomes a top priority. We present the conceptual design for a 10MW aneutronic fusion engine with high exhaust velocities that would reduce transit time for a Jupiter mission to eighteen months and enable more challenging exploration missions in the solar system and beyond. __________________________________________________

  5. Reduced shear power spectrum

    SciTech Connect (OSTI)

    Dodelson, Scott; /Fermilab /Chicago U., Astron. Astrophys. Ctr. /Northwestern U.; Shapiro, Charles; /Chicago U. /KICP, Chicago; White, Martin J.; /UC, Berkeley, Astron.

    2005-08-01

    Measurements of ellipticities of background galaxies are sensitive to the reduced shear, the cosmic shear divided by (1-{kappa}) where {kappa} is the projected density field. They compute the difference between shear and reduced shear both analytically and with simulations. The difference becomes more important an smaller scales, and will impact cosmological parameter estimation from upcoming experiments. A simple recipe is presented to carry out the required correction.

  6. Computational Science and Engineering

    E-Print Network [OSTI]

    Giger, Christine

    Computational Science and Engineering Research Profile The Computational Science and Engineering and Process Engineering Computational Science and Engineering Laboratory Prof. Dr. Petros Koumoutsakos petros

  7. Introduction Engineering

    E-Print Network [OSTI]

    Banbara, Mutsunori

    to improve the safety of city and urban space, and the promotion of environmental symbiosis. Electrical Environmental Engineering A study to create a social living space rich in amenity, convenience, and harmony processing technology). Mechanical Engineering Thermo-Fluid and Energy Mechanics and Physics of Materials

  8. Improving Diesel Engine Sweet-spot Efficiency and Adapting it...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Diesel Engine Sweet-spot Efficiency and Adapting it to Improve Duty-cycle MPG - plus Increasing Propulsion and Reducing Cost Improving Diesel Engine Sweet-spot Efficiency and...

  9. Mechanical and Manufacturing Engineering Mechatronics Engineering Minor

    E-Print Network [OSTI]

    Mechanical and Manufacturing Engineering Mechatronics Engineering Minor Students pursuing a BSc in mechanical or manufacturing engineering have experience and entrepreneurship. Mechatronics is the synergistic combination of mechanical

  10. Electrical Engineer (Power Electronics, Lead Engineer) | Princeton...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineer (Power Electronics, Lead Engineer) Department: Engineering Supervisor(s): Albert von Halle Requisition Number: 1500733 The Princeton University Plasma Physics Laboratory...

  11. A Bimetmallic Fuel-Borne Catalyst for Reduce Precious Metal Use...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A Bimetmallic Fuel-Borne Catalyst for Reduce Precious Metal Use in Medium-Duty Diesel Engines A Bimetmallic Fuel-Borne Catalyst for Reduce Precious Metal Use in Medium-Duty Diesel...

  12. Preparing for Transfer Biological Engineering

    E-Print Network [OSTI]

    Walter, M.Todd

    Preparing for Transfer Majors: Biological Engineering Biomedical Engineering* Chemical Engineering Civil Engineering Computer Science Electrical & Computer Engineering Engineering Physics Environmental Engineering Information Science, Systems, & Technology Materials Science & Engineering Mechanical Engineering

  13. HCCI Engine Optimization and Control

    SciTech Connect (OSTI)

    Rolf D. Reitz

    2005-09-30

    The goal of this project was to develop methods to optimize and control Homogeneous-Charge Compression Ignition (HCCI) engines, with emphasis on diesel-fueled engines. HCCI offers the potential of nearly eliminating IC engine NOx and particulate emissions at reduced cost over Compression Ignition Direct Injection engines (CIDI) by controlling pollutant emissions in-cylinder. The project was initiated in January, 2002, and the present report is the final report for work conducted on the project through December 31, 2004. Periodic progress has also been reported at bi-annual working group meetings held at USCAR, Detroit, MI, and at the Sandia National Laboratories. Copies of these presentation materials are available on CD-ROM, as distributed by the Sandia National Labs. In addition, progress has been documented in DOE Advanced Combustion Engine R&D Annual Progress Reports for FY 2002, 2003 and 2004. These reports are included as the Appendices in this Final report.

  14. Biological Engineering Electives Biosystems Engineering

    E-Print Network [OSTI]

    Hill, Jeffrey E.

    Control Theory (3) ECH 4323L Chemical Engineering Lab (1) ECH 4504 Chemical Kinetics & Reactor Design (4) ECH 4524 Heterogeneous Kinetics & Reactor Design (2) EGM 4313 Intermediate Engineering Analysis (4 Principles of Food Processing (4) FOS 4522C Seafood Technology (3) FOS 4722C Quality Control in Foods (3) FOS

  15. The Right Technology Matters: The Importantce of Public-Private Partnerships for Engine Development

    Broader source: Energy.gov [DOE]

    Ways to iimprove the efficiency of an engine and reducing its carbon footprint are points in the presentation

  16. Engineering Dissimilatory metal-reducing bacteria (DMRB) are a

    E-Print Network [OSTI]

    in microbial fuel cells (MFCs) for alternative energy generation and for degradation of organic wastes paradigm in which soluble oxidants are transported into cells for reduction during metabolism. The unique. In the case of Geobacter spp., anode biofilms can grow to be many microbes thick, confounding long

  17. Internal combustion engine system and method with reduced noxious emissions

    SciTech Connect (OSTI)

    Munk, M.

    1988-03-22

    For use in conjunction with a combustion-based system including a combustion chamber having an exhaust, a source of input air and a source of fuel for providing input air and fuel to the combustion chamber, and means communicating with the combustion chamber for obtaining power from the combustion; the improvement is described comprising: an ultrasonic fogging device communicating with the input air, the fogging device being adapted to receive a fogger air supply and fogger water supply, and to generate a fog in the source of input air which has a droplet size of the order of ten microns or less, and evaporates to dryness in the input air; means for sensing noxious emissions in exhaust gases from the combustion chamber; and means for controlling the fogging device in accordance with the sensed noxious emissions.

  18. Internal combustion engine system and method with reduced noxious emissions

    SciTech Connect (OSTI)

    Munk, M.

    1987-05-26

    An improved turbine apparatus is described comprising: a turbine power generator, including a source of input air, and a source of fuel, a compressor which receives the input air, a combustion chamber which receives air from the output of the compressor and fuel from the source of fuel, a turbine which receives exhaust gases from the combustion chamber; and an electrical generator mechanically coupled with the turbine. A fogging device communicates with the input air. The fogging device is adapted to receive a fogger air supply and a fogger water supply, and to generate a fog in the input air; means for sensing noxious emissions in the exhaust gases; and means for controlling the fogging device in accordance with the sensed noxious emissions.

  19. Novel Application of Air Separation Membranes Reduces Engine NOx Emissions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass map shinesSolarNew scholarshipThreeFebruaryMuseumEffect901 Federal7 A newsletter-

  20. Reducing Logistics Footprints and Replenishment Demands: Nano-engineered

    Office of Scientific and Technical Information (OSTI)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTech ConnectSpeedingConnect(Conference) |(Patent) | SciTech ConnectRedSilica

  1. Reducing Logistics Footprints and Replenishment Demands: Nano-engineered

    Office of Scientific and Technical Information (OSTI)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTech ConnectSpeedingConnect(Conference) |(Patent) | SciTech ConnectRedSilicaSilica

  2. Engineering Competition 2012 BEST Engineering Competition

    E-Print Network [OSTI]

    Papanicolaou, Vassilis

    Engineering Competition 2012 8-9 2012 ATHENS #12;BEST Engineering Competition O : Engineering Competition 2012, , 8 9 2012, . , , BEST - Board of European Students. , 2 , " " . projects, , mail- . #12;BEST Engineering Competition

  3. Department of Aerospace Engineering Science Engineering Center

    E-Print Network [OSTI]

    Mojzsis, Stephen J.

    Department of Aerospace Engineering Science _____________________________________________________________________ Engineering Center Campus Box 429 Boulder, Colorado 80309-0429 Phone (303) 735-4900 Fax (303) 492-4990 University of Colorado Boulder Aerospace Engineering Visiting Scholar Program The Aerospace Engineering

  4. Engineering Project Management Using The Engineering Cockpit

    E-Print Network [OSTI]

    Engineering Project Management Using The Engineering Cockpit A collaboration platform for project managers and engineers Thomas Moser, Richard Mordinyi, Dietmar Winkler and Stefan Biffl Christian Doppler Laboratory "Software Engineering Integration for Flexible Automation Systems" Vienna University of Technology

  5. Thermoacoustic engines

    SciTech Connect (OSTI)

    Swift, G.W.

    1988-10-01

    Thermoacoustic engines, or acoustic heat engines, are energy-conversion devices that achieve simplicity and concomitant reliability by use of acoustic technology. Their efficiency can be a substantial fraction of Carnot's efficiency. In thermoacoustic prime movers, heat flow from a high-temperature source to a low-temperature sink generates acoustic power (which may be converted to electric power using a transducer). In thermoacoustic heat pumps and refrigerators, acoustic power is used to pump heat from a low-temperature source to a high-temperature sink. This review teaches the fundamentals of thermoacoustic engines, by analysis, intuition, and example.

  6. COLLEGE OF ENGINEERING COLLEGE OF ENGINEERING

    E-Print Network [OSTI]

    Collett Jr., Jeffrey L.

    Energy COLLEGE OF ENGINEERING #12;COLLEGE OF ENGINEERING 2 COLLEGE OF ENGINEERING Engineers have of new knowledge that colleges of engineering have the greatest global impact. Sandra Woods Woods joined Colorado State University in 2001 and has served as dean of the College of Engineering since 2005. She

  7. Mechanical and Manufacturing Engineering Petroleum Engineering Minor

    E-Print Network [OSTI]

    Mechanical and Manufacturing Engineering Petroleum Engineering Minor The Department of Mechanical and Manufacturing Engineering offers a minor in petroleum engineering within the mechanical engineering major program. This minor builds on the fundamentals provided by a basis in mechanical engineering and adds

  8. General Engineer

    Broader source: Energy.gov [DOE]

    This position may be located in either the Office of Energy Statistics or the Office of Energy Analysis of EIA. This position is established to provide a professional general engineer to perform...

  9. INTELLIGENT ENGINEERING

    E-Print Network [OSTI]

    Ernst, Damien

    CPSPP'97 ­ IFAC/CIGRE SYMPOSIUM ON CONTROL OF POWER SYSTEMS AND POWER PLANTS TUTORIAL COURSE ON INTELLIGENT SYSTEMS AND THEIR POWER ENGINEERING APPLICATIONS AUTOMATIC LEARNING APPLICATIONS TO DSA Learning.6 Examples : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : 32 5.6.1 Hydro

  10. Harmonic engine

    DOE Patents [OSTI]

    Bennett, Charles L. (Livermore, CA)

    2009-10-20

    A high efficiency harmonic engine based on a resonantly reciprocating piston expander that extracts work from heat and pressurizes working fluid in a reciprocating piston compressor. The engine preferably includes harmonic oscillator valves capable of oscillating at a resonant frequency for controlling the flow of working fluid into and out of the expander, and also preferably includes a shunt line connecting an expansion chamber of the expander to a buffer chamber of the expander for minimizing pressure variations in the fluidic circuit of the engine. The engine is especially designed to operate with very high temperature input to the expander and very low temperature input to the compressor, to produce very high thermal conversion efficiency.

  11. EnginEEring Houston. EnginEEring tHE globE.

    E-Print Network [OSTI]

    Glasser, Adrian

    EnginEEring Houston. EnginEEring tHE globE. The University of Houston Cullen College of Engineering engineering as well as a certificate program in subsea engineering, the first program of its kind at 713-743-4246 #12;The UH Cullen College of Engineering was established in 1941. When the university

  12. sc0013217-reaction-engineering | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    fluid recovery and reduce water usage per unit of gas produced. Performers Reaction Engineering International (REI), Murray UT 84107 Background The evolution of hydraulic...

  13. Global optimization in reduced space

    E-Print Network [OSTI]

    Wechsung, Achim

    2014-01-01

    Optimization is a key activity in any engineering discipline. Global optimization methods, in particular, strive to solve nonconvex problems, which often arise in chemical engineering, and deterministic algorithms such as ...

  14. Idling Reduction for Personal Vehicles

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center Home Page onPropane Rolls on asPublicationsFuelsSchool BusFuel-

  15. DEPARTMENTS Architecture & Civil Engineering

    E-Print Network [OSTI]

    Burton, Geoffrey R.

    DEPARTMENTS Architecture & Civil Engineering Biology & Biochemistry Chemical Engineering Chemistry Computer Science Economics Education Electronic & Electrical Engineering Politics, Languages and International Studies School of Management Mathematical Sciences Mechanical Engineering (Sports Engineering

  16. Matter & Energy Civil Engineering

    E-Print Network [OSTI]

    Rogers, John A.

    See Also: Matter & Energy Detectors· Optics· Civil Engineering· Engineering· Nature of Water Yonggang Huang, Joseph Cummings Professor of Civil and Environmental Engineering and Mechanical Engineering· Electronics· Reference Photography· Infrared· Mechanical engineering · Optics· ScienceDaily (Jan. 17, 2011

  17. COMPUTER ENGINEERING EECS Department

    E-Print Network [OSTI]

    COMPUTER ENGINEERING EECS Department The Electrical Engineering and Computer Science (EECS) Department at WSU offers undergraduate degrees in electrical engineering, computer engineering and computer science. The EECS Department offers Master of Science degrees in computer science, electrical engineering

  18. OF ENGINEERING CREATE. DISCOVER.

    E-Print Network [OSTI]

    Heller, Barbara

    IIT ARMOUR COLLEGE OF ENGINEERING CREATE. DISCOVER. FOLLOW YOUR PASSION. #12;WHY ENGINEERING AT IIT ARMOUR? Five Departments. One Distinctive Educational Experience. DEPARTMENT OF BIOMEDICAL ENGINEERING · Degree programs in cell and tissue engineering, medical imaging, and neural engineering

  19. ELECTRICAL ENGINEERING EECS Department

    E-Print Network [OSTI]

    ELECTRICAL ENGINEERING EECS Department The Electrical Engineering and Computer Science (EECS) Department at WSU offers undergraduate degrees in electrical engineering, computer engineering and computer science. The EECS Department offers master of science degrees in computer science, electrical engineering

  20. Engineering Guidebook Bioengineering

    E-Print Network [OSTI]

    Chen, Yiling

    Engineering Guidebook 2014-2015 Bioengineering Electrical Environmental Mechanical #12;Harvard SEAS Engineering Guidebook 2 What is engineering? In the simplest terms, engineers provide solutions to the world technologies, to protecting vital ecosystems by controlling pollution. At its core, engineering

  1. civil EnginEEring College of Engineering and Mines

    E-Print Network [OSTI]

    Hartman, Chris

    civil EnginEEring College of Engineering and Mines Department of Civil and Environmental Engineering 907-474-7241 http://cem.uaf.edu/cee/ McE, MS Degrees Minimum Requirements for Degrees: 30 credits Civil engineers plan, design and supervise the construction of facilities essential to modern life

  2. Environmental Engineering 1 Environmental Engineering

    E-Print Network [OSTI]

    Haller, Gary L.

    water, groundwater protection and remediation, wastewater treatment, indoor and outdoor air pollution assessment and development of engineering solutions to environmental problems affecting land, water, and air, solid and hazardous waste disposal, cleanup of contaminated sites, the prevention of pollution through

  3. Experimental investigation of microfabricated bipropellant rocket engines

    E-Print Network [OSTI]

    Protz, Christopher S. (Christopher Stephen), 1977-

    2004-01-01

    As satellite missions begin to require smaller satellites, launch systems and attitude control thrusters of reduced mass will be required. Microrocket engines could provide a low mass, high specific impulse, modular answer ...

  4. Preparing for Transfer Biological Engineering

    E-Print Network [OSTI]

    Walter, M.Todd

    Preparing for Transfer Majors: Biological Engineering Chemical Engineering Civil Engineering Computer Science Electrical & Computer Engineering Engineering Physics Environmental Engineering Information Science, Systems, & Technology Materials Science & Engineering Mechanical Engineering Operations

  5. Reducing Configuration Complexity

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergyInterested PartiesBuildingBudgetFinancial Opportunities » Pastams AG 2015 Reducing

  6. Naval electrochemical corrosion reducer

    DOE Patents [OSTI]

    Clark, Howard L. (Ballston Lake, NY)

    1991-10-01

    A corrosion reducer for use with ships having a hull, a propeller mounted a propeller shaft and extending through the hull, bearings supporting the shaft, at least one thrust bearing and one seal. The improvement includes a current collector and a current reduction assembly for reducing the voltage between the hull and shaft in order to reduce corrosion due to electrolytic action. The current reduction assembly includes an electrical contact, the current collector, and the hull. The current reduction assembly further includes a device for sensing and measuring the voltage between the hull and the shaft and a device for applying a reverse voltage between the hull and the shaft so that the resulting voltage differential is from 0 to 0.05 volts. The current reduction assembly further includes a differential amplifier having a voltage differential between the hull and the shaft. The current reduction assembly further includes an amplifier and a power output circuit receiving signals from the differential amplifier and being supplied by at least one current supply. The current selector includes a brush assembly in contact with a slip ring over the shaft so that its potential may be applied to the differential amplifier.

  7. Simultaneously firing two cylinders of an even firing camless engine

    DOE Patents [OSTI]

    Brennan, Daniel G

    2014-03-11

    A valve control system includes an engine speed control module that determines an engine speed and a desired engine stop position. A piston position module determines a desired stopping position of a first piston based on the desired engine stop position. A valve control module receives the desired stopping position, commands a set of valves to close at the desired stopping position if the engine speed is less than a predetermined shutdown threshold, and commands the set of valves to reduce the engine speed if the engine speed is greater than the predetermined shutdown threshold.

  8. Protein design for pathway engineering

    SciTech Connect (OSTI)

    Eriksen, DT; Lian, JZ; Zhao, HM

    2014-02-01

    Design and construction of biochemical pathways has increased the complexity of biosynthetically-produced compounds when compared to single enzyme biocatalysis. However, the coordination of multiple enzymes can introduce a complicated set of obstacles to overcome in order to achieve a high titer and yield of the desired compound. Metabolic engineering has made great strides in developing tools to optimize the flux through a target pathway, but the inherent characteristics of a particular enzyme within the pathway can still limit the productivity. Thus, judicious protein design is critical for metabolic and pathway engineering. This review will describe various strategies and examples of applying protein design to pathway engineering to optimize the flux through the pathway. The proteins can be engineered for altered substrate specificity/selectivity, increased catalytic activity, reduced mass transfer limitations through specific protein localization, and reduced substrate/product inhibition. Protein engineering can also be expanded to design biosensors to enable high through-put screening and to customize cell signaling networks. These strategies have successfully engineered pathways for significantly increased productivity of the desired product or in the production of novel compounds. (C) 2013 Elsevier Inc. All rights reserved.

  9. Building America Systems Engineering Approach

    SciTech Connect (OSTI)

    2011-12-15

    The Building America Research Teams use a systems engineering approach to achieve higher quality and energy savings in homes. Using these techniques, the energy consumption of new houses can be reduced by 40% or more with little or no impact on the cost of ownership.

  10. Rotary engine

    SciTech Connect (OSTI)

    Meyman, U.

    1987-02-03

    A rotary engine is described comprising: two covers spaced from one another; rotors located between the covers and rotating and planetating in different phases; the rotors interengaging to form working chambers therebetween; means to supply fluid to the working chambers and means to exhaust fluid from the working chambers during the operating cycle of the engine; gearing for synchronizing rotation and planetation of the rotors and each including first and second gears arranged so that one of the gears is connected with the rotors while the other of the gears is connected with an immovable part of the engine and the gears engage with one another; carriers interconnecting the rotors and planetating in the same phase with the planetation of the rotors for synchronizing the rotation and planetation of the rotors; shafts arranged to support the carriers during their planetations; and elements for connecting the covers with one another.

  11. Electrical and computer engineering

    E-Print Network [OSTI]

    Berdichevsky, Victor

    Electrical and computer engineering COLLEGE of ENGINEERING DepartmentofElectricalandComputerEngineering CollegeofEngineering 5050AnthonyWayneDrive Detroit,MI48202 College of engineering t Educating future engineers for 80 years t Home to nation's first electric-drive vehicle engineering program and alternative

  12. Engineering AnteaterDrive

    E-Print Network [OSTI]

    Markopoulou, Athina

    Rockw ell & M DEA Engineering Tower AnteaterDrive AnteaterDrive East Peltason Drive EastPeltasonDrive East Peltason Drive Anteater Parking Structure EngineeringServiceRoad Engineering Laboratory Facility Engineering Gateway Engineering Hall AIRB Calit2 Engineering Lecture Hall Campus Building Engineering Building

  13. Nuclear Engineering Program Ranking

    E-Print Network [OSTI]

    Evans, Paul G.

    Nuclear Engineering Program Ranking 2 Enrollment Approximately 200 undergraduate students and 120 in Nuclear Engineering (BS) · Bachelor of Science in Engineering Physics (BS) · Master of Science in Nuclear Engineering and Engineering Physics (MS) · Doctor of Philosophy in Nuclear Engineering and Engineering Physics

  14. StormwaterStormwater EngineeringEngineering

    E-Print Network [OSTI]

    Hunt, William F.

    ­ Water Harvesting #12;2 "We Bring Engineering to Life"BAE Stormwater Engineering GroupBAE Stormwater Harvesting: Balance ofWater Harvesting: Balance of Water Supply & DemandWater Supply & Demand 0 5 10 15 20 25 Bring Engineering to Life"BAE Stormwater Engineering GroupBAE Stormwater Engineering Group Water

  15. Engineering 10 Engineering Design and Analysis

    E-Print Network [OSTI]

    Agogino, Alice M.

    1 Engineering 10 Engineering Design and Analysis Spring, 2009 Faculty Alice Agogino, Mechanical Engineering, Lecture Section 1, 2 Ray Seed, Civil and Environmental Engineering, Lecture Section 3 Xin Guo, Industrial Engineering and Operations Research, Lecture Section 4 Lectures 10 ­ 11 AM Monday, Wednesday

  16. Faculty of Science & Engineering Study Engineering

    E-Print Network [OSTI]

    Waikato, University of

    Faculty of Science & Engineering Study Engineering at Waikato #12;Welcome Contact information SCHOOL OF ENGINEERING Phone: +64 7 838 4266 Email: engineering@waikato.ac.nz FACULTY OF SCIENCE & ENGINEERING Toll free: 0800 438 254 Phone: +64 7 838 4625 Email: science@waikato.ac.nz Website: www

  17. GREEN ENGINEERING PROGRAM Green Engineering & Life

    E-Print Network [OSTI]

    Pennycook, Steve

    GREEN ENGINEERING PROGRAM Green Engineering & Life Cycle Assessment (LCA) at Virginia Tech Oak Ridge National Lab April 10, 2014 Dr. Sean McGinnis Director ­ VT Green Engineering Program Research Associate Professor ­ Materials Science & Engineering #12;GREEN ENGINEERING PROGRAM Virginia Tech College

  18. Faculty of Engineering Engineering and Computing

    E-Print Network [OSTI]

    Walkley, Mark

    Faculty of Engineering Engineering and Computing Postgraduate Masters Courses 2015 TOP 100 UNIVERSITY FOR ENGINEERING AND TECHNOLOGY Tim es H igher W orld U niversity Rankings #12;UNIVERSITY OF LEEDS FACULTY OF ENGINEERING www.engineering.leeds.ac.uk POSTGRADUATE MASTERS COURSES 2015 2 The University

  19. College of Engineering and Science ENGINEERING AND

    E-Print Network [OSTI]

    Stuart, Steven J.

    87 College of Engineering and Science COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering educational oppor- tunities. The innovative combination of engineering and science disciplines that comprises.clemson.edu/ces. Minors Engineering and science students can complement their majors by selecting minor concentrations

  20. College of Engineering WORLD-CLASS ENGINEERING

    E-Print Network [OSTI]

    Maroncelli, Mark

    College of Engineering WORLD-CLASS ENGINEERING in Learning, Discovery and Engagement 2014-2019 STRATEGY #12;College of Engineering PREAMBLE The College of Engineering at Penn State is a leading academy, research enterprise and service to the global engineering community. Innovation is a hallmark of Penn State

  1. College of Engineering and Science ENGINEERING AND

    E-Print Network [OSTI]

    Stuart, Steven J.

    91 College of Engineering and Science COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering educational oppor- tunities. The innovative combination of engineering and science disciplines that comprises.clemson.edu/ces. Minors Engineering and science students can complement their majors by selecting minor concentrations

  2. College of Engineering and Science ENGINEERING

    E-Print Network [OSTI]

    Stuart, Steven J.

    81 College of Engineering and Science COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering.clemson.edu. Minors Engineering and science students can complement their majors by selecting minor concentrations of study. Available minors include Bioengineering, Environmental Engineering, International Engi- neering

  3. MECHANICAL ENGINEERING Curriculum Notes

    E-Print Network [OSTI]

    Mohan, Chilukuri K.

    MECHANICAL ENGINEERING Curriculum Notes 2013-2014 1. Mechanical engineering students must complete of technical electives. 2. Technical electives must be taken within the Mechanical and Aerospace Engineering

  4. Advanced Reciprocating Engine Systems

    Broader source: Energy.gov [DOE]

    The Advanced Reciprocating Engine Systems (ARES) program is designed to promote separate but parallel engine development between the major stationary, gaseous fueled engine manufacturers in the...

  5. NITINOL ENGINE DEVELOPMENT

    E-Print Network [OSTI]

    Banks, Ridgway

    2013-01-01

    20, 1976 LBL-5293 NITINOL ENGINE DEVELOPMENT Ridgway Banksof California. NITINOL ENGINE DEVELOPMENT Ridgway Banks andof practical heat engines based on this phenomenon is

  6. Supervisory Electrical Engineer

    Broader source: Energy.gov [DOE]

    This position is located in Substation Maintenance and High Voltage Engineering (TESM) of Substation Engineering (TES), Engineering and Technical Services (TE), Transmission Services (T),...

  7. Environmental Engineering and Management

    E-Print Network [OSTI]

    Mirza, Umar Karim

    2001-01-01

    Review: Environmental Engineering and Management By J.M.H. Power (Eds. ). Environmental Engineering and Management.Conference on Environmental Engineering and Management,

  8. Civil & Environmental Engineering

    E-Print Network [OSTI]

    Thomas, Andrew

    Civil & Environmental Engineering Undergraduate Guide June, 2015 #12;- 1 - TABLE OF CONTENTS WELCOME TO CIVIL & ENVIRONMENTAL ENGINEERING ......................................................................................................................- 4 - CIVIL ENGINEERING CURRICULUM

  9. Engineering the global ecosystem

    E-Print Network [OSTI]

    Stringfellow, William T.; Jain, Ravi

    2010-01-01

    of humans deliberately engineering agricultural landscapes.010-0302-8 EDITORIAL Engineering the global ecosystemtale about human explorers engineering the ecosystem of Mars

  10. Civil & Environmental Engineering

    E-Print Network [OSTI]

    Thomas, Andrew

    Civil & Environmental Engineering Undergraduate Guide June, 2011 #12;1 TABLE OF CONTENTS WELCOME..............................................................................................4 CIVIL ENGINEERING CURRICULUM.....................................................................................5 CIVIL ENGINEERING CURRICULUM FORM

  11. Civil & Environmental Engineering

    E-Print Network [OSTI]

    Thomas, Andrew

    Civil & Environmental Engineering Undergraduate Guide June, 2014 #12;- 1 - TABLE OF CONTENTS WELCOME TO CIVIL & ENVIRONMENTAL ENGINEERING ......................................................................................................................- 4 - CIVIL ENGINEERING CURRICULUM

  12. Harmonic engine

    DOE Patents [OSTI]

    Bennett, Charles L.; Sewall, Noel; Boroa, Carl

    2014-08-19

    An engine based on a reciprocating piston engine that extracts work from pressurized working fluid. The engine includes a harmonic oscillator inlet valve capable of oscillating at a resonant frequency for controlling the flow of working fluid into of the engine. In particular, the inlet valve includes an inlet valve head and a spring arranged together as a harmonic oscillator so that the inlet valve head is moveable from an unbiased equilibrium position to a biased closed position occluding an inlet. Upon releasing the inlet valve the inlet valve head undergoes a single oscillation past the equilibrium positio to a maximum open position and returns to a biased return position close to the closed position to choke the flow and produce a pressure drop across the inlet valve causing the inlet valve to close. Protrusions carried either by the inlet valve head or piston head are used to bump open the inlet valve from the closed position and initiate the single oscillation of the inlet valve head, and protrusions carried either by the outlet valve head or piston head are used to close the outlet valve ahead of the bump opening of the inlet valve.

  13. Value Engineering

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-01-07

    To establish Department of Energy (DOE) value engineering policy that meets the requirements of Public Law 104-106, Section 4306 as codified by 41 United States Code 432. Canceled by DOE N 251.94. Does not cancel other directives.

  14. Application Engineering,

    E-Print Network [OSTI]

    Skogestad, Sigurd

    A Plantwide Control Procedure with Application to Control Structure Design for a Gas Power Plant S. Skogestad, M. S. Govatsmark Department of Chemical Engineering, NTNU #12; Outline #15; Gas power plant #15; Plantwide control #15; Plantwide control procedure #15; Application #15; Concluding remarks #12; Gas power

  15. Thermal engine

    SciTech Connect (OSTI)

    Karnes, T.E.; Trupin, R.J.

    1984-01-03

    A thermal engine utilizing a strip of nitinol material or other thermally responsive shape memory effect material to drive a reciprocating output shaft, said strip of material forming a common wall between two different alternating temperature sources which thermally cycle the material.

  16. Sandia Energy - Automotive HCCI Engine

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Automotive HCCI Engine Home Transportation Energy Predictive Simulation of Engines Engine Combustion Automotive Automotive HCCI Engine Automotive HCCI EngineAshley...

  17. Pressure reducing regulator

    DOE Patents [OSTI]

    Whitehead, John C. (Davis, CA); Dilgard, Lemoyne W. (Willits, CA)

    1995-01-01

    A pressure reducing regulator that controls its downstream or outlet pressure to a fixed fraction of its upstream or inlet pressure. The regulator includes a housing which may be of a titanium alloy, within which is located a seal or gasket at the outlet end which may be made of annealed copper, a rod, and piston, each of which may be made of high density graphite. The regulator is insensitive to temperature by virtue of being without a spring or gas sealed behind a diaphragm, and provides a reference for a system in which it is being used. The rod and piston of the regulator are constructed, for example, to have a 1/20 ratio such that when the downstream pressure is less than 1/20 of the upstream pressure the regulator opens and when the downstream pressure exceeds 1/20 of the upstream pressure the regulator closes.

  18. Pressure reducing regulator

    DOE Patents [OSTI]

    Whitehead, J.C.; Dilgard, L.W.

    1995-10-10

    A pressure reducing regulator that controls its downstream or outlet pressure to a fixed fraction of its upstream or inlet pressure is disclosed. The regulator includes a housing which may be of a titanium alloy, within which is located a seal or gasket at the outlet end which may be made of annealed copper, a rod, and piston, each of which may be made of high density graphite. The regulator is insensitive to temperature by virtue of being without a spring or gas sealed behind a diaphragm, and provides a reference for a system in which it is being used. The rod and piston of the regulator are constructed, for example, to have a 1/20 ratio such that when the downstream pressure is less than 1/20 of the upstream pressure the regulator opens and when the downstream pressure exceeds 1/20 of the upstream pressure the regulator closes. 10 figs.

  19. Reducing Penguin Pollution

    E-Print Network [OSTI]

    Bhubanjyoti Bhattacharya; Alakabha Datta; David London

    2013-04-29

    The most common decay used for measuring 2beta_s, the phase of Bs-Bsbar mixing, is Bs -> J/psi phi. This decay is dominated by the colour-suppressed tree diagram, but there are other contributions due to gluonic and electroweak penguin diagrams. These are often referred to as "penguin pollution" (PP) because their inclusion in the amplitude leads to a theoretical error in the extraction of 2beta_s from the data. In the standard model (SM), it is estimated that the PP is negligible, but there is some uncertainty as to its exact size. Now, phi_s^{c\\bar{c}s} (the measured value of 2beta_s) is small, in agreement with the SM, but still has significant experimental errors. When these are reduced, if one hopes to be able to see clear evidence of new physics (NP), it is crucial to have the theoretical error under control. In this paper, we show that, using a modification of the angular analysis currently used to measure phi_s^{c\\bar{c}s} in Bs -> J/psi phi, one can reduce the theoretical error due to PP. Theoretical input is still required, but it is much more modest than entirely neglecting the PP. If phi_s^{c\\bar{c}s} differs from the SM prediction, this points to NP in the mixing. There is also enough information to test for NP in the decay. This method can be applied to all Bs/Bsbar -> V1 V2 decays.

  20. Sizes, graphitic structures and fractal geometry of light-duty diesel engine particulates.

    SciTech Connect (OSTI)

    Lee, K. O.; Zhu, J.; Ciatti, S.; Choi, M. Y.; Energy Systems; Drexel Univ.

    2003-01-01

    The particulate matter of a light-duty diesel engine was characterized in its morphology, sizes, internal microstructures, and fractal geometry. A thermophoretic sampling system was employed to collect particulates directly from the exhaust manifold of a 1.7-liter turbocharged common-rail direct-injection diesel engine. The particulate samples collected at various engine-operating conditions were then analyzed by using a high-resolution transmission electron microscope (TEM) and an image processing/data acquisition system. Results showed that mean primary particle diameters (dp), and radii of gyration (Rg), ranged from 19.4 nm to 32.5 nm and 77.4 nm to 134.1 nm, respectively, through the entire engine-operating conditions of 675 rpm (idling) to 4000 rpm and 0% to 100% loads. It was also revealed that the other important parameters sensitive to the particulate formation, such as exhaust-gas recirculation (EGR) rate, equivalence ratio, and temperature, affected particle sizes significantly. Bigger primary particles were measured at higher EGR rates, higher equivalence ratios (fuel-rich), and lower exhaust temperatures. Fractal dimensions (D{sup f}) were measured at a range of 1.5 - 1.7, which are smaller than those measured for heavy-duty direct-injection diesel engine particulates in our previous study. This finding implies that the light-duty diesel engine used in this study produces more stretched chain-like shape particles, while the heavy-duty diesel engine emits more spherical particles. The microstructures of diesel particulates were observed at high TEM magnifications and further analyzed by a Raman spectroscope. Raman spectra revealed an atomic structure of the particulates produced at high engine loads, which is similar to that of typical graphite.

  1. MASTER OF ENGINEERING Pratt School of Engineering

    E-Print Network [OSTI]

    MASTER OF ENGINEERING Pratt School of Engineering Duke University ESTIMATED FULL-TIME STUDENT year. There is no charge for Registration for students in the Master of Engineering program. Cost

  2. Design and prototype of dual loop lubricant system to improve engine fuel economy, emissions, and oil drain interval

    E-Print Network [OSTI]

    Plumley, Michael J

    2015-01-01

    Regulations aimed at improving fuel economy and reducing harmful emissions from internal combustion engines place constraints on lubricant formulations necessary for controlling wear and reducing friction. Viscosity reduction ...

  3. Engineering n About the Degrees

    E-Print Network [OSTI]

    Delene, David J.

    Engineering n About the Degrees The College of Engineering & Mines at the University of North Dakota prepares you for the responsible practice of professional engineering. The College offers programs in Chemical Engineering, Civil Engineering, Electrical Engineering, Geological Engineering, Mechanical

  4. Mehrdad Negahban, Associate Chair for Graduate Studies and Research Mechanical Engineering, Engineering Mechanics, Materials Engineering, Biomedical Engineering

    E-Print Network [OSTI]

    Farritor, Shane

    Mehrdad Negahban, Associate Chair for Graduate Studies and Research #12;Mechanical Engineering, Engineering Mechanics, Materials Engineering, Biomedical Engineering What is it: (Merriam-Webster) · Careful you do! #12;Mechanical Engineering, Engineering Mechanics, Materials Engineering, Biomedical

  5. Reactivation of an Idle Lease to Increase Heavy Oil Recovery through Application of Conventional Steam Drive Technology in a Low Dip Slope and Basin Reservoir in the Midway-Sunset Field, San Jaoquin Basin, California

    SciTech Connect (OSTI)

    Deo, M.; Forster, C.; Jenkins, C.; Schamel, S.; Sprinkel, D.; and Swain, R.

    1999-02-01

    This project reactivates ARCO's idle Pru Fee lease in the Midway-Sunset field, California and conducts a continuous steamflood enhanced oil recovery demonstration aided by an integration of modern reservoir characterization and simulation methods. Cyclic steaming was used to reestablish baseline production within the reservoir characterization phase of the project completed in December 1996. During the demonstration phase begun in January 1997, a continuous steamflood enhanced oil recovery is testing the incremental value of this method as an alternative to cyclic steaming. Other economically marginal Class III reservoirs having simular producibility problems will benefit from insight gained in this project. The objectives of the project are: (1) to return the shut-in portion of the reservoir to optimal commercial production; (2) to accurately describe the reservoir and recovery process; and (3) to convey the details of this activity to the domestic petroleum industry, especially t o other producers in California, through an aggressive technology transfer program.

  6. Reactivation of an Idle Lease to Increase Heavy Oil Recovery Through Application of Conventional Steam Drive Technology in a Low Dip Slope and Basin Reservoir in the Midway-Sunset Field, San Jaoquin Basin, California

    SciTech Connect (OSTI)

    Steven Schamel

    1997-07-29

    This project reactivates ARCO?s idle Pru Fee property in the Midway-Sunset field, California and conducts a continuous steamflood enhanced oil recovery demonstration aided by an integration of modern reservoir characterization and simulation methods. Cyclic steaming was used to reestablish baseline production within the reservoir characterization phase of the project. During the demonstration phase begun in January 1997, a continuous steamflood enhanced oil recovery was initiated to test the incremental value of this method as an alternative to cyclic steaming. Other economically marginal Class III reservoirs having similar producibility problems will benefit from insight gained in this project. The objectives of the project are: (1) to return the shut-in portion of the reservoir to optimal commercial production; (2) to accurately describe the reservoir and the recovery process; and (3) to convey the details of this activity to the domestic petroleum industry, especially to other producers in California, through an aggressive technology transfer program.

  7. Reactivation of an Idle Lease to Increase Heavy Oil Recovery Through Application of Conventional Steam Drive Technology in a Low Dip Slope and Basin Resrvoir in the Midway-Sunset Field, San Jaoquin Basin, California

    SciTech Connect (OSTI)

    Creties Jenkins; Doug Sprinkel; Milind Deo; Ray Wydrinski; Robert Swain

    1997-10-21

    This project reactivates ARCO?s idle Pru Fee lease in the Midway-Sunset field, California and conducts a continuous steamflood enhanced oil recovery demonstration aided by an integration of modern reservoir characterization and simulation methods. Cyclic steaming is being used to reestablish baseline production within the reservoir characterization phase of the project. During the demonstration phase scheduled to begin in January 1997, a continuous steamflood enhanced oil recovery will be initiated to test the incremental value of this method as an alternative to cyclic steaming. Other economically marginal Class III reservoirs having similar producibility problems will benefit from insight gained in this project. The objectives of the project are: (1) to return the shut-in portion of the reservoir to optimal commercial production; (2) to accurately describe the reservoir and recovery process; and (3) to convey the details of this activity to the domestic petroleum industry, especially to other producers in California, through an aggressive technology transfer program.

  8. Science Mathematics Engineering

    E-Print Network [OSTI]

    Hamlet, Richard

    Science Mathematics Engineering . ­ p.1 #12;Science Mathematics Engineering Science, Computer `Science', . ­ p.1 #12;Science Mathematics Engineering Science, Computer `Science', Mathematics, . ­ p.1 #12;Science Mathematics Engineering Science, Computer `Science', Mathematics, and Software Development

  9. The Responsibilities of Engineers 

    E-Print Network [OSTI]

    Smith, Justin Douglas 1978-

    2012-12-06

    Knowledge of the responsibilities of engineers is key to answering ethical questions about the work of engineers, because the decisions made by engineers often have ethical dimensions and implications. Engineers develop and implement technologies...

  10. Engineering Materials and

    E-Print Network [OSTI]

    Furui, Sadaoki

    Science Engineering Materials and Chemical Technology Computing Life Science and Technology Environment and Society Mathematics Physics Chemistry Earth and Planetary Sciences Mechanical Engineering Systems and Control Engineering Electrical and Electronic Engineering Information and Communications

  11. Department of Biomedical Engineering

    E-Print Network [OSTI]

    Stormo, Gary

    Department of Biomedical Engineering Undergraduate Studies Manual 2011­2012 #12;Biomedical Engineering Undergraduate Advising Manual 2011 | 1 Greetings and Department Mission and Objectives 2 Introduction to Biomedical Engineering 3 Biomedical Engineering at Washington University 4 Career Opportunities

  12. Department of Biomedical Engineering

    E-Print Network [OSTI]

    Stormo, Gary

    Department of Biomedical Engineering Undergraduate Studies Manual 2012­2013 #12;Biomedical Engineering Undergraduate Advising Manual 2012 | 1 Greetings and Department Mission and Objectives 2 Introduction to Biomedical Engineering 3 Biomedical Engineering at Washington University 4 Career Opportunities

  13. Biomimetics Engineering from Biology

    E-Print Network [OSTI]

    Agogino, Alice M.

    Biomimetics or Engineering from Biology Hari Dharan Department of Mechanical Engineering University" ­ copying only? !!"Biologically-Inspired Design" !!"Engineering from Biology" Definition !!It is not "biology for engineers". !!It is not "imitating" or "copying" biology. !!It is not "reverse

  14. MMEECCHHAANNIICCAALL ENGINEERING PROGRAM

    E-Print Network [OSTI]

    Fernandez, Eduardo

    the ability to apply knowledge to the analysis and solution of significant engineering problems throughMMEECCHHAANNIICCAALL ENGINEERING PROGRAM UNDERGRADUATE OVERVIEW Mechanical Engineering is the branch of engineering that is most directly and broadly concerned with mechanical systems

  15. Engineering & the Environment

    E-Print Network [OSTI]

    Molinari, Marc

    ; Automotive; Biomedical Engineering; Computational Engineering and Design; Engineering Management; Interdisciplinary; Mechatronics; Naval Engineering; Semester in Industry; Semester Abroad; Sustainable Energy Systems) Programme Handbook 2014/15 for new and continuing students #12;Contents Section No Content Page

  16. Mechanical Engineering 1 Mechanical Engineering

    E-Print Network [OSTI]

    Haller, Gary L.

    , for example, in novel gas turbine or electric hybrid vehicles--require that students understand the fundamentals of mechanics, thermodynamics, fluid mechanics, combustion, and materials science. In all members of the next generation of mechanical engineers. To implement this mission, the department adheres

  17. Department of MINING ENGINEERING

    E-Print Network [OSTI]

    Capecchi, Mario R.

    AS A MINING ENGINEER IMAGINE IMAGINE Department of MINING ENGINEERING THE UNIVERSITY OF UTAH www.mining

  18. Stewarding a Reduced Stockpile

    SciTech Connect (OSTI)

    Goodwin, B T; Mara, G

    2008-04-18

    The future of the US nuclear arsenal continues to be guided by two distinct drivers: the preservation of world peace and the prevention of further proliferation through our extended deterrent umbrella. Timely implementation of US nuclear policy decisions depends, in part, on the current state of stockpile weapons, their delivery systems, and the supporting infrastructure within the Department of Defense (DoD) and the Department of Energy's National Nuclear Security Administration (NNSA). In turn, the present is a product of past choices and world events. Now more than ever, the nuclear weapons program must respond to the changing global security environment and to increasing budget pressures with innovation and sound investments. As the nation transitions to a reduced stockpile, the successes of the Stockpile Stewardship Program (SSP) present options to transition to a sustainable complex better suited to stockpile size, national strategic goals and budgetary realities. Under any stockpile size, we must maintain essential human capital, forefront capabilities, and have a right-sized effective production capacity. We present new concepts for maintaining high confidence at low stockpile numbers and to effectively eliminate the reserve weapons within an optimized complex. We, as a nation, have choices to make on how we will achieve a credible 21st century deterrent.

  19. Rotary engine

    SciTech Connect (OSTI)

    Larson, T. G.

    1985-10-22

    The rotary engine has a circumferential main chamber and at least one smaller combustion chamber spaced from the main chamber. The rotor includes a plurality of radially-projecting sealing members in spaced relationship thereabout for maintaining a fluid-sealed condition along a single fixed transverse strip area on the interior surface of the main chamber. A single radially-oriented axially-parallel piston vane is also carried by the rotor and moves through the fixed strip area of the main chamber at each revolution of the rotor. Plural passages for intake, compression, expansion, and exhaust are ported into the main chamber at locations proximate to the fixed strip area. Valve means in the passages selectively open and close the same for a cycle of engine operation involving intake, compression, burning, and exhaust.

  20. Civil and environmental engineering

    E-Print Network [OSTI]

    Berdichevsky, Victor

    Civil and environmental engineering COLLEGE of ENGINEERING DepartmentofCivilandEnvironmentalEngineering-credit EDGE Engineering Entrepreneur Certificate Program is a great addition to a civil and environmental t engineering.wayne.edu/cee #12;What is civil and environmental engineering? Everywhere you look, you'll see

  1. Engineering Graduate Programs

    E-Print Network [OSTI]

    School of Engineering Graduate Programs Unique location, unique opportunities About The San of Engineering 1600 Holloway Avenue San Francisco, CA 94132 engineering.sfsu.edu Phone: (415) 338-1174 engrasstSFSU Application FormsSFSU Application Forms School of EngineeringSchool of EngineeringSchool of Engineering

  2. Engineeringtechnology COLLEGE of ENGINEERING

    E-Print Network [OSTI]

    Berdichevsky, Victor

    Engineeringtechnology COLLEGE of ENGINEERING DivisionofEngineeringTechnology CollegeofEngineering 4855FourthStreet Detroit,MI48202 College of engineering t Educating future engineers for 80 years t Home to nation's first electric-drive vehicle engineering program and alternative energy technology

  3. INDUSTRIAL ENGINEERING GRADUATE PROGRAMS

    E-Print Network [OSTI]

    Gelfond, Michael

    INDUSTRIAL ENGINEERING GRADUATE PROGRAMS The Master of Science in Industrial Engineering (M Systems and Engineering (M.S.M.S.E.), the Doctor of Philosophy in Industrial Engineering, and the Doctor of Philosophy in Systems and Engineering Management programs prepare competent industrial engineers

  4. Ability of Catalytic Converters to Reduce Air Pollution

    E-Print Network [OSTI]

    Nizkorodov, Sergey

    NOx - 1 Ability of Catalytic Converters to Reduce Air Pollution MEASUREMENT OF SELECTED AIR Air Pollution MEASUREMENT OF SELECTED AIR POLLUTANTS IN CAR EXHAUST INTRODUCTION Automobile engines of gasoline (hydrocarbons, CxHy) in air: CxHy + O2 CO2 + H2O + heat (1) When there is the correct balance

  5. Designing Automation to Reduce Operator Errors Nancy G. Leveson

    E-Print Network [OSTI]

    Leveson, Nancy

    Designing Automation to Reduce Operator Errors Nancy G. Leveson Computer Science and Engineering University of Washington Everett Palmer NASA Ames Research Center Introduction Advanced automation has been of mode­related problems [SW95]. After studying accidents and incidents in the new, highly automated

  6. Reducing Electricity Demand Charge for Data Centers with Partial Execution

    E-Print Network [OSTI]

    Li, Baochun

    Reducing Electricity Demand Charge for Data Centers with Partial Execution Hong Xu Department Department of Electrical and Computer Engineering University of Toronto Toronto, ON, Canada bli@eecg.toronto.edu ABSTRACT Data centers consume a large amount of energy and incur substantial electricity cost

  7. Reducing gas generators and methods for generating a reducing gas

    SciTech Connect (OSTI)

    Scotto, Mark Vincent; Perna, Mark Anthony

    2015-11-03

    One embodiment of the present invention is a unique reducing gas generator. Another embodiment is a unique method for generating a reducing gas. Other embodiments include apparatuses, systems, devices, hardware, methods, and combinations for generating reducing gas. Further embodiments, forms, features, aspects, benefits, and advantages of the present application will become apparent from the description and figures provided herewith.

  8. Engineering in Action Engineering Challenge Camp

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    G-84 ESB Casey's ATA 2:30 p.m. Engineering and Racing (Race Car Presentation) ESB Parking Lot 40Engineering in Action Engineering Challenge Camp July 20-25, 2014 Hosted by the West Virginia University Benjamin M. Statler College of Engineering & Mineral Resources and sponsored in part

  9. INDUSTRIAL ENGINEERING Industrial engineering is concerned

    E-Print Network [OSTI]

    INDUSTRIAL ENGINEERING Industrial engineering is concerned with looking at the "big picture" of systems that allow organizations and individuals to perform at their best. Industrial engineers bridge should be used and how they should be used. Industrial engineers design and run the factories and systems

  10. Software Engineering, an established Accreditable Engineering Discipline

    E-Print Network [OSTI]

    Szabados, Barna

    Software Engineering, an established Accreditable Engineering Discipline By B.Szabados, P.Eng, Mc of the Canadian Engineering Accreditation Board (CEAB), as well as at a workshop at the NCDEAS meeting in September 1997. 1. INTRODUCTION In the late seventies, the discipline of Computer Engineering has evolved

  11. MASTER OF ENGINEERING Biological and Environmental Engineering

    E-Print Network [OSTI]

    Walter, M.Todd

    MASTER OF ENGINEERING Biological and Environmental Engineering Program Requirements Fall 2014 The Master of Engineering (MEng) is a professional degree program intended for those who have a Bachelors degree or equivalent in an engineering or closely related science field from a college or university

  12. Petroleum Engineering 301 Petroleum Engineering Numerical Methods

    E-Print Network [OSTI]

    10 Petroleum Engineering 301 Petroleum Engineering Numerical Methods Credit 3: (2-3) Required for Juniors Catalog Description: Use of numerical methods in a variety of petroleum engineering problems methods. Prerequisites(s): MATH 308 Textbook Required: Numerical Methods for Engineers, 6th Edition

  13. INDUSTRIAL ENGINEERING Industrial engineering is concerned

    E-Print Network [OSTI]

    INDUSTRIAL ENGINEERING Industrial engineering is concerned with looking at the "big picture" of systems that allow organizations and individuals to perform at their best. Industrial engineers bridge should be used and how they should be used. The focus of industrial engineering is on process improvement

  14. Engineering Design DEGREES: Master of Engineering Design

    E-Print Network [OSTI]

    Thompson, Michael

    . Admissions Criteria Masters (M.Eng.Design): The minimum academic requirement for admission is normallyEngineering Design DEGREES: Master of Engineering Design ENTRY DATES: September, January (limited) The W Booth School of Engineering Practice Master of Engineering Design graduate degree program

  15. College of Engineering and Science ENGINEERING AND

    E-Print Network [OSTI]

    Stuart, Steven J.

    88 College of Engineering and Science 88 COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers a broad range of rigorous and stimulating baccalaureate programs that provide unexcelled educational oppor- tunities. The innovative combination of engineering and science disciplines

  16. MASTER OF ENGINEERING Biological and Environmental Engineering

    E-Print Network [OSTI]

    Walter, M.Todd

    MASTER OF ENGINEERING Biological and Environmental Engineering Program Requirements Fall 2013 The Master of Engineering (MEng) is a professional degree program intended for those who have a Bachelors degree or equivalent in an engineering or closely related science field from a college or university

  17. College of Engineering and Science ENGINEERING

    E-Print Network [OSTI]

    Stuart, Steven J.

    84 College of Engineering and Science 84 COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers a broad range of rigorous and stimulating baccalaure- ate programs which is available at www. ces.clemson.edu. Minors Engineering and science students can complement their majors

  18. College of Engineering CE Civil Engineering

    E-Print Network [OSTI]

    MacAdam, Keith

    College of Engineering CE Civil Engineering KEY: # = new course * = course changed = course.Lecture,twohours;laboratory,fourhoursperweek.Prereqorcoreq:MA113orconsentofinstructor. CE 120 INTRODUCTION TO CIVIL ENGINEERING. (1) An introduction to the civil engineering profession and the use of computer hardware and software in CE systems analysis and design

  19. College of Engineering and Science ENGINEERING

    E-Print Network [OSTI]

    Stuart, Steven J.

    80 College of Engineering and Science 80 COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers a broad range of rigorous and stimulating baccalaure- ate programs which is available at www. ces.clemson.edu. Minors Engineering and science students can complement their majors

  20. College of Engineering CME Chemical Engineering

    E-Print Network [OSTI]

    MacAdam, Keith

    College of Engineering CME Chemical Engineering KEY: # = new course * = course changed = course dropped University of Kentucky 2013-2014 Undergraduate Bulletin 1 CME 006 THE ENGINEERING PROFESSION (JUNIOR AND SENIOR). (0) Activities of the Student Chapter of the American Institute of Chemical Engineers

  1. College of Engineering and Science ENGINEERING AND

    E-Print Network [OSTI]

    Stuart, Steven J.

    86 College of Engineering and Science 86 COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers a broad range of rigorous and stimulating baccalaure- ate programs which is available at www. clemson.edu/ces. Minors Engineering and science students can complement their majors

  2. Departmental Electives: Civil Engineering, Civil Engineering Concentration

    E-Print Network [OSTI]

    Connors, Daniel A.

    3 cr. CIVE 502 Fluid Mechanics 3 cr. CIVE 504 Wind Engineering 3 cr. CIVE 506 Wind Effects Hydrology 3 cr. CIVE 521 Hydrometry 3 cr. CIVE 522 Engineering Hydrology 3 cr. CIVE 524 Modeling Engineering and Hydraulics 3 cr. CIVE 573 Urban Stormwater Management 3 cr. CIVE 574 Civil Engineering

  3. Investigation of Alternative Fuels and Advanced Engine Technology: Improving Engine Efficiency and Reducing Emissions

    E-Print Network [OSTI]

    Rapp, Vi Hai

    2011-01-01

    NO x . Unburned Hydrocarbon Emissions Measurements UnburnedHoriba, 1990]. Measurements of hydrocarbon concentrationdifferent hydrocarbons. This allows accurate measurements to

  4. Biological Engineering 2014-2015 BIOLOGICAL ENGINEERING PROGRAM PROGRESS FORM

    E-Print Network [OSTI]

    Walter, M.Todd

    Biological Engineering 2014-2015 8 BIOLOGICAL ENGINEERING PROGRAM PROGRESS FORM Applies to students Calculus for Engineers I* MATH 1910 (4) ______ _____ _____ Calculus for Engineers II* MATH 1920 (4) ______ _____ _____ Engineering Math* (Differential Equations) MATH 2930 (4) ______ _____ _____ Engineering Math* (Linear Algebra

  5. College of Engineering Graduate assistantship positions in Mechanical Engineering

    E-Print Network [OSTI]

    Rasheed, Khaled

    College of Engineering Graduate assistantship positions in Mechanical Engineering Wang's Research or more of the following areas: materials science, mechanical engineering, engineering mechanics, physics references, via email, to: Dr. Xianqiao Wang College of Engineering-Mechanical Engineering 101 Driftmier

  6. MECHANICAL ENGINEERING UNDERGRADUATE DEGREES --TUFTS UNIVERSITY SCHOOL OF ENGINEERING

    E-Print Network [OSTI]

    Dennett, Daniel

    MECHANICAL ENGINEERING UNDERGRADUATE DEGREES -- TUFTS UNIVERSITY SCHOOL OF ENGINEERING DEGREE of Science in Computer Engineering* BSCPE Computer Engin COEN --eering MECHANICAL ENGINEERING Bachelor MAJORFIRST DEPARTMENT UNDERGRADUATE DEGREE ABBREV MAJO ABBREV PROGRAMR BIOMEDICAL ENGINEERING Bachelor

  7. Chemical and Biological Engineering Department of Chemical and Biological Engineering

    E-Print Network [OSTI]

    Heller, Barbara

    Issues Particle Processing Pharmaceutical Engineering Polymer Science and Engineering Process Operation in Polymer Science and Engineering: David Venerus, Director Engineering Center for Diabetes Research and Engineering Lab Center of Excellence in Polymer Science and Engineering Lab Computational Fluid Dynamics Lab

  8. OF TEXAS AT Aerospace Engineering

    E-Print Network [OSTI]

    Texas at Arlington, University of

    THE UNIVERSITY OF TEXAS AT ARLINGTON · Aerospace Engineering · Applied Chemistry · Applied Physics · Biomedical Engineering · Chemistry · Civil Engineering · Computer Science Engineering · Computer Science · Electrical Engineering · Environmental & Earth Sciences · Experimental Psychology · Industrial Engineering

  9. Engineering at a Glance Faculty

    E-Print Network [OSTI]

    Guenther, Frank

    #12;Engineering at a Glance · Faculty ­105 Tenured/tenure track ­10 Non Engineering ­Electrical and Computer Engineering ­Mechanical Engineering · Divisions ­Material Science and Engineering ­Systems Engineering #12;Undergraduate Degree Programs

  10. Engineering Organization Chart Assistant Dean

    E-Print Network [OSTI]

    Delene, David J.

    Engineering Organization Chart Fall `12 Assistant Dean Outreach & Recruiting Matthew Cavalli and Geological Engineering Joseph Hartman Chair, Petroleum Engineering Steve Benson Chair, Electrical Engineering Forrest Ames (interim) Chair, Mechanical Engineering Matthew Cavalli Chair, Chemical Engineering Mike Mann

  11. 1engineering.vanderbilt.edu School of Engineering

    E-Print Network [OSTI]

    1engineering.vanderbilt.edu School of Engineering VanderbiltSchool of Engineering Vanderbilt #12;2 engineering.vanderbilt.edu engineering AcAdemic depArtments Biomedical Engineering Chemical and Biomolecular Engineering Civil and Environmental Engineering Electrical Engineering and Computer Science General

  12. Study of Engine Operating Parameter Effects on GDI Engine Particle...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Study of Engine Operating Parameter Effects on GDI Engine Particle-Number Emissions Study of Engine Operating Parameter Effects on GDI Engine Particle-Number Emissions Results show...

  13. ELECTRICAL ENGINEERING Curriculum Notes

    E-Print Network [OSTI]

    Mohan, Chilukuri K.

    ELECTRICAL ENGINEERING Curriculum Notes 2013-2014 1. Electrical Engineering (EE) students must/programs/electrical_engineering) and minors are used to regulate technical electives. A student must complete four technical elective courses in Electrical Engineering or Computer Engineering. At a minimum

  14. Biomedical Engineering Student Enrollment

    E-Print Network [OSTI]

    Connors, Daniel A.

    Biomedical Engineering Student Enrollment Spring 2010 Spring 2011 Spring 2012 Spring 2013 Spring 2014 Biomedical Engineering with CB 3 28 49 72 Biomedical Engineering with EE 2 5 7 20 Biomedical Engineering with EL 1 2 2 5 Biomedical Engineering with ME 6 45 83 116 Degrees Awarded 2007-08 2008-09 2009

  15. Engineering and Computer

    E-Print Network [OSTI]

    McConnell, Terry

    L.C. Smith College of Engineering and Computer Science #12;ENGINEERING THE FUTURE The engineers and computer scientists who will be tomorrow's leaders--and not "just" engineers--require more than roots with Syracuse University's vast opportunities, the L.C. Smith College of Engineering and Computer

  16. ENGINEERING AND HUMAN HEALTH

    E-Print Network [OSTI]

    Saskatchewan, University of

    ENGINEERING AND HUMAN HEALTH: FROM THE INSIDE OUT Engineering research on small scales could have huge health implications College of Engineering U N I V E R S I T Y O F S A S K ATC H E WA N CO L L E G 17 Alumni accolades College of Engineering THOROUGHUNIVERSITY OF SASKATCHEWAN COLLEGE OF ENGINEERING

  17. CHEMICAL ENGINEERING Curriculum Notes

    E-Print Network [OSTI]

    Mohan, Chilukuri K.

    CHEMICAL ENGINEERING Curriculum Notes 2013-2014 1. Chemical engineering students must complete not included in the required chemical engineering curriculum. All technical electives are subject to approval be in chemical engineering. 2. Chemical engineering students must complete a minimum of 18 credits in the Social

  18. Stirling engine application study

    SciTech Connect (OSTI)

    Teagan, W.P.; Cunningham, D.R.

    1983-03-01

    The potential for Stirling engine applications in the 0.5 to 5000 hp output range is assessed. The following are included: a market survey of potential engine applications, classification of applications, conventional engine markets and performance characteristics, status of Sterling engine systems, selection of application classes for Stirling engines, and the possible effects of technology, economic conditions, and regulatory changes. (MHR)

  19. engineering an undergraduate guide

    E-Print Network [OSTI]

    Hart, Gus

    MECHANICAL engineering an undergraduate guide v #12;ENGINEER'S If it isn't broken, take it apart and fix it. motto: " " #12;TABLE OF CONTENTS 1. What is mechanical engineering? 1 2. What can a mechanical engineer do with their degree? 2 3. What companies have hired BYU mechanical engineering graduates? 3 4

  20. and Industrial Engineering

    E-Print Network [OSTI]

    Mountziaris, T. J.

    45 Mechanical and Industrial Engineering 220 Engineering Lab Degrees: Bachelor of Science in Mechanical Engineering Bachelor of Science in Industrial Engineering Contact: James R. Rinderle, Undergraduate Program Director Office: 207C Engineering Lab Building Phone: (413) 545-2505 Head of Department

  1. Materials Science & Engineering

    E-Print Network [OSTI]

    Simons, Jack

    Materials Science & Engineering The University of Utah 2014-15 Undergraduate Handbook #12;STUDYING FOR A MATERIALS SCIENCE AND ENGINEERING DEGREE Materials Science and Engineering inter-twines numerous disciplines, including chemistry, physics and engineering. It is the one discipline within the College of Engineering

  2. IDLE FREE CAMPAIGN Procedure: 6.12 Created: 07/01/2009 Version: 2.0 Revised: 10/10/2012

    E-Print Network [OSTI]

    Jia, Songtao

    's goals around clean air, greenhouse gas reductions, noise reduction, and efficient resource use. B to reduce your individual carbon footprint. You can also schedule personal or business meetings over and maintain a constant speed. When accelerating or decelerating your vehicle, do so gradually. When you

  3. Envera Variable Compression Ratio Engine

    SciTech Connect (OSTI)

    Charles Mendler

    2011-03-15

    Aggressive engine downsizing, variable compression ratio and use of the Atkinson cycle are being combined to improve fuel economy by up to 40 percent relative to port fuel injected gasoline engines, while maintaining full engine power. Approach Engine downsizing is viewed by US and foreign automobile manufacturers as one of the best options for improving fuel economy. While this strategy has already demonstrated a degree of success, downsizing and fuel economy gains are currently limited. With new variable compression ratio technology however, the degree of engine downsizing and fuel economy improvement can be greatly increased. A small variable compression ratio (VCR) engine has the potential to return significantly higher vehicle fuel economy while also providing high power. Affordability and potential for near term commercialization are key attributes of the Envera VCR engine. VCR Technology To meet torque and power requirements, a smaller engine needs to do more work per stroke. This is typically accomplished by boosting the incoming charge with either a turbo or supercharger so that more energy is present in the cylinder per stroke to do the work. With current production engines the degree of engine boosting (which correlates to downsizing) is limited by detonation (combustion knock) at high boost levels. Additionally, the turbo or supercharger needs to be responsive and efficient while providing the needed boost. VCR technology eliminates the limitation of engine knock at high load levels by reducing compression ratio to {approx}9:1 (or whatever level is appropriate) when high boost pressures are needed. By reducing the compression ratio during high load demand periods there is increased volume in the cylinder at top dead center (TDC) which allows more charge (or energy) to be present in the cylinder without increasing the peak pressure. Cylinder pressure is thus kept below the level at which the engine would begin to knock. When loads on the engine are low the compression ratio can be raised (to as much as 18:1) providing high engine efficiency. It is important to recognize that for a well designed VCR engine cylinder pressure does not need to be higher than found in current production turbocharged engines. As such, there is no need for a stronger crankcase, bearings and other load bearing parts within the VCR engine. The Envera VCR mechanism uses an eccentric carrier approach to adjust engine compression ratio. The crankshaft main bearings are mounted in this eccentric carrier or 'crankshaft cradle' and pivoting the eccentric carrier 30 degrees adjusts compression ratio from 9:1 to 18:1. The eccentric carrier is made up of a casting that provides rigid support for the main bearings, and removable upper bearing caps. Oil feed to the main bearings transits through the bearing cap fastener sockets. The eccentric carrier design was chosen for its low cost and rigid support of the main bearings. A control shaft and connecting links are used to pivot the eccentric carrier. The control shaft mechanism features compression ratio lock-up at minimum and maximum compression ratio settings. The control shaft method of pivoting the eccentric carrier was selected due to its lock-up capability. The control shaft can be rotated by a hydraulic actuator or an electric motor. The engine shown in Figures 3 and 4 has a hydraulic actuator that was developed under the current program. In-line 4-cylinder engines are significantly less expensive than V engines because an entire cylinder head can be eliminated. The cost savings from eliminating cylinders and an entire cylinder head will notably offset the added cost of the VCR and supercharging. Replacing V6 and V8 engines with in-line VCR 4-cylinder engines will provide high fuel economy at low cost. Numerous enabling technologies exist which have the potential to increase engine efficiency. The greatest efficiency gains are realized when the right combination of advanced and new technologies are packaged together to provide the greatest gains at the least cost. Aggressive engine downsiz

  4. Vortex Induced Vibrations of cylinders : experiments in reducing drag force and amplitude of motion

    E-Print Network [OSTI]

    Farrell, David Emmanuel

    2007-01-01

    Reducing the deleterious effect of Vortex Induced Vibrations (VIV) in marine risers is an important task for ocean engineers; and many competing factors exist in the design of VIV suppression devices. This thesis explores ...

  5. Automatic design of the gravity-reducing propulsion system of the TALARIS Hopper Testbed

    E-Print Network [OSTI]

    Cańizales Díaz, Jorge (Jorge Luis)

    2012-01-01

    This thesis describes a Systems Engineering tool for automatic design, presents the results of its application to the problem of designing Earth-based reduced-gravity simulators, and compares the performance of the found ...

  6. Consider the DME alternative for diesel engines

    SciTech Connect (OSTI)

    Fleisch, T.H.; Meurer, P.C.

    1996-07-01

    Engine tests demonstrate that dimethyl ether (DME, CH{sub 3}OCH{sub 3}) can provide an alternative approach toward efficient, ultra-clean and quiet compression ignition (CI) engines. From a combustion point of view, DME is an attractive alternative fuel for CI engines, primarily for commercial applications in urban areas, where ultra-low emissions will be required in the future. DME can resolve the classical diesel emission problem of smoke emissions, which are completely eliminated. With a properly developed DME injection and combustion system, NO{sub x} emissions can be reduced to 40% of Euro II or U.S. 1998 limits, and can meet the future ULEV standards of California. Simultaneously, the combustion noise is reduced by as much as 15 dB(A) below diesel levels. In addition, the classical diesel advantages such as high thermal efficiency, compression ignition, engine robustness, etc., are retained.

  7. School of Engineering Annual Report

    E-Print Network [OSTI]

    Alpay, S. Pamir

    Activities............................. Civil & Environmental Engineering.......... PROGRAMS Engineering Diversity Program....................................... Environmental EngineeringSchool of Engineering 1 9 9 9 Annual Report #12;University of ConnecticutUniversity of Connecticut

  8. Rotary engine

    SciTech Connect (OSTI)

    Brownfield, L.A.

    1980-12-02

    The major components of this rotary engine are two equal sized rotary units, the housing containing them along with associated ignition and cooling systems. Each of the rotary units consists of a shaft, gear, two outer compressor wheels, and one center power wheel which has twice the axial thickness as the compressor wheel. All the wheels are cylindrical in shape with a lobe section comprising a 180/sup 0/ arc on the periphery of each wheel which forms an expanding and contracting volumetric chamber by means of leading and trailing lips. The lobes of the first rotary unit are situated 180/sup 0/ opposite the lobes of the second adjacent mating rotary unit, thus lobes can intermesh with its corresponding wheel.

  9. The effect of surface finish on piston ring-pack performance in advanced reciprocating engine systems

    E-Print Network [OSTI]

    Jocsak, Jeffrey (Jeffrey Alan)

    2005-01-01

    Frictional losses in the piston ring-pack of an engine account for approximately 20% of the total frictional losses within an engine. Methods of surface texture optimization were investigated to reduce piston ring-pack ...

  10. Combustion lean limits fundamentals and their application to a SI hydrogen-enhanced engine concept

    E-Print Network [OSTI]

    Ayala, Ferran A. (Ferran Alberto), 1976-

    2006-01-01

    Operating an engine with excess air, under lean conditions, has significant benefits in terms of increased engine efficiency and reduced emissions. However, under high dilution levels, a lean limit is reached where combustion ...

  11. Shaping the Terms of Competition: Environmental Regulation and Corporate Strategies to Reduce Diesel Vehicle Emissions

    E-Print Network [OSTI]

    de Weck, Olivier L.

    Diesel Vehicle Emissions by Christine Bik-Kay Ng B.S., Civil and Environmental Engineering University Strategies to Reduce Diesel Vehicle Emissions by Christine Bik-Kay Ng Submitted to the Engineering Systems. This research explains the conditions under which competitive regulatory strategies are pursued in the diesel

  12. Method for reducing pressure drop through filters, and filter exhibiting reduced pressure drop

    DOE Patents [OSTI]

    Sappok, Alexander; Wong, Victor

    2014-11-18

    Methods for generating and applying coatings to filters with porous material in order to reduce large pressure drop increases as material accumulates in a filter, as well as the filter exhibiting reduced and/or more uniform pressure drop. The filter can be a diesel particulate trap for removing particulate matter such as soot from the exhaust of a diesel engine. Porous material such as ash is loaded on the surface of the substrate or filter walls, such as by coating, depositing, distributing or layering the porous material along the channel walls of the filter in an amount effective for minimizing or preventing depth filtration during use of the filter. Efficient filtration at acceptable flow rates is achieved.

  13. High efficiency stoichiometric internal combustion engine system

    DOE Patents [OSTI]

    Winsor, Richard Edward (Waterloo, IA); Chase, Scott Allen (Cedar Falls, IA)

    2009-06-02

    A power system including a stoichiometric compression ignition engine in which a roots blower is positioned in the air intake for the engine to control air flow. Air flow is decreased during part power conditions to maintain the air-fuel ratio in the combustion chamber of the engine at stoichiometric, thus enabling the use of inexpensive three-way catalyst to reduce oxides of nitrogen. The roots blower is connected to a motor generator so that when air flow is reduced, electrical energy is stored which is made available either to the roots blower to temporarily increase air flow or to the system electrical load and thus recapture energy that would otherwise be lost in reducing air flow.

  14. Mechanical & Aerospace Engineering

    E-Print Network [OSTI]

    Mechanical & Aerospace Engineering Despite an enormous range of applications and centuries. Nicholas Ouellette is an Associate Professor in the Department of Mechanical Engineering & Materials Structures in Turbulent Flow Nicholas Ouellette Department of Mechanical Engineering & Material Sciences Yale

  15. Mechanical & Aerospace Engineering

    E-Print Network [OSTI]

    Mechanical & Aerospace Engineering This presentation presents the stability analysis of time- delay of the Department of Mechanical and Industrial Engineering, Southern Illinois University Edwardsville, where he has Gu Dept. of Mechanical & Industrial Engineering Southern Illinois University, Edwardsville March 27

  16. Mechanical & Aerospace Engineering

    E-Print Network [OSTI]

    Mechanical & Aerospace Engineering Ductile failure in structural materials has been a problem the Temple Foundation Professorship in the Department of Aerospace Engineering and Engineering Mechanics, multiscale experimental mechanics, mechanics of polymers. He is a fellow of the American Society

  17. Graduate Studies Geosystems Engineering

    E-Print Network [OSTI]

    Jacobs, Laurence J.

    in geo-based engineering fields. Geosystems engineering, includes geotechnics, geomechanics, geomaterials interaction; geotech- nical processes in energy and mining applications; geomechanics in geological processes Geomechanics · Foundation Systems · Geomechanics Modeling · Geotechnical Earthquake Engineering · Geotechnical

  18. IEEE Dallas Engineering

    E-Print Network [OSTI]

    Yang, Jian

    2007 IEEE Dallas Engineering in Medicine and Biology Workshop #12; 2007 IEEE Dallas Engineering in Medicine and Biology Workshop Emerging Technologies for Healthcare OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY i #12;Abstract- The lack of suitable scaffolding

  19. Technology & Engineering Division

    E-Print Network [OSTI]

    Technology & Engineering Division High-Temperature Superconducting Magnets for Fusion: New & Engineering Division Contents · Background on Superconductivity · Fusion Magnets ­ Present and Future ­ Vision/15/2014 2Joseph V. Minervini #12;Technology & Engineering Division Superconductivity #12;Technology

  20. Mathematics and Engineering

    E-Print Network [OSTI]

    Wehlau, David

    Mathematics and Engineering Applied Mechanics Computing and Communications Systems and Robotics #12;Mathematics and Engineering Integrated Learning Centre Modern communications, control, electrical, mechanical, and mechatronic systems require sophisticated mathematical models and analysis. This unique engineering program

  1. INDUSTRIAL ENGINEER APPRENTICE OPPORTUNITY

    E-Print Network [OSTI]

    Pohl, Karsten

    INDUSTRIAL ENGINEER APPRENTICE OPPORTUNITY SUMMER 2013 Industrial Engineering COOP Student needed-Fri, for summer 2013. Student must be enrolled in BS Engineering program. (Preferably completed 2-3 yrs

  2. Mechanical & Industrial Engineering

    E-Print Network [OSTI]

    Mountziaris, T. J.

    Mechanical & Industrial Engineering 1 Welcome MIE Industrial Advisory Board October 15, 2010 #12;Mechanical & Industrial Engineering 2 MIE Dorothy Adams Undergraduate/Graduate Secretary David Schmidt Associate Professor & Graduate Program Director #12;Mechanical & Industrial Engineering 3 MIE James Rinderle

  3. Mechanical & Aerospace Engineering

    E-Print Network [OSTI]

    Mechanical & Aerospace Engineering Today's design environments take advantage of powerful professor of Mechanical Engineering at Carnegie Mellon University. He is the founder of Visual Design award and American Society of Mechanical Engineers Design Automation Society Young Investigator Award

  4. Research Review Mechanical Engineering

    E-Print Network [OSTI]

    Theune, Mariët

    Research Review Mechanical Engineering University of Twente #12;QANU / Research Review Mechanical;QANU / Research Review Mechanical Engineering / University of Twente 3 Report on the research assessment of Mechanical Engineering at the University of Twente Contents Preface

  5. Department of Engineering.

    E-Print Network [OSTI]

    Department of Civil & Structural Engineering. Vibration based Structural Health Monitoring James views of the same spectrum Department of Civil & Structural Engineering. Structural health monitoring of Sheffield, United Kingdom Department of Civil & Structural Engineering. HEALTH and PERFORMANCE are different

  6. Introduction to Software Engineering

    E-Print Network [OSTI]

    Syllabus Background References Homework Videos Project Introduction to Software Engineering AERSP Exam Conclusions Appendix Links Hits Software Engineering: AERSP 440 http Confidence Aerospace Software (2006) IEEE Computer Society SE Portal Software Engineering: AERSP 440 http

  7. COMPUTATIONAL SCIENCE, ENGINEERING & MATHEMATICS

    E-Print Network [OSTI]

    Knopf, Dan

    and engineering; · mathematical modeling; · numerical analysis; · applied mathematics. COMPUTATIONAL ENGINEERINGCOMPUTATIONAL SCIENCE, ENGINEERING & MATHEMATICS: PATH TO DEGREE Fall 2014 Todd Arbogast Chair and Sciences (ICES) and Department of Mathematics The University of Texas at Austin COMPUTATIONAL ENGINEERING

  8. Annals of Biomedical Engineering

    E-Print Network [OSTI]

    Luo, Xiaoyu

    1 23 Annals of Biomedical Engineering The Journal of the Biomedical Engineering Society ISSN 0090 are held exclusively by Biomedical Engineering Society. This e-offprint is for personal use only and shall

  9. Oxygen-reducing catalyst layer

    DOE Patents [OSTI]

    O'Brien, Dennis P. (Maplewood, MN); Schmoeckel, Alison K. (Stillwater, MN); Vernstrom, George D. (Cottage Grove, MN); Atanasoski, Radoslav (Edina, MN); Wood, Thomas E. (Stillwater, MN); Yang, Ruizhi (Halifax, CA); Easton, E. Bradley (Halifax, CA); Dahn, Jeffrey R. (Hubley, CA); O'Neill, David G. (Lake Elmo, MN)

    2011-03-22

    An oxygen-reducing catalyst layer, and a method of making the oxygen-reducing catalyst layer, where the oxygen-reducing catalyst layer includes a catalytic material film disposed on a substrate with the use of physical vapor deposition and thermal treatment. The catalytic material film includes a transition metal that is substantially free of platinum. At least one of the physical vapor deposition and the thermal treatment is performed in a processing environment comprising a nitrogen-containing gas.

  10. Software Engineering M3 / 2012 Software Engineering

    E-Print Network [OSTI]

    Singer, Jeremy

    Software Engineering M3 / 2012 1 Software Engineering In a 21st century knowledge-based economy, computer software is of vital importance. For instance to 3% of the total UK economy. Furthermore, software infrastructure of some kind

  11. Mechanical & Aerospace Engineering

    E-Print Network [OSTI]

    Mechanical & Aerospace Engineering The gap between `advanced' prosthetic technology was educated in Mechanical and Biomedical Engineering at the University of Illinois and Northwestern University

  12. Engineering Get to know

    E-Print Network [OSTI]

    /process engineering Consulting engineers Consumer services Diagnostic medical technology Dietetics Education Manufacturing Occupational health and safety Oil and Gas Patent law Pharmaceuticals Polymer

  13. DNA Engine Thermal Cycler

    E-Print Network [OSTI]

    Raizada, Manish N.

    ® Peltier Thermal Cycler PTC-0200 DNA Engine Cycler Operations Manual Version 4.0 #12;ii Tech Support: 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .vi The DNA Engine® Peltier Thermal Cycler Introduction

  14. NITINOL ENGINE DEVELOPMENT

    E-Print Network [OSTI]

    Banks, Ridgway

    2013-01-01

    16-20, 1976 LBL-5293 NITINOL ENGINE DEVELOPMENT RidgwayUniversity of California. NITINOL ENGINE DEVELOPMENT Ridgwaynickel-titanium alloy "55-Nitinol." Details of the current

  15. Department of Biomedical Engineering

    E-Print Network [OSTI]

    Zhigilei, Leonid V.

    Department of Developing Leaders of Innovation Biomedical Engineering #12;At U.Va., biomedical and techniques of biomedical engineering -- molecular biology, cellular microscopy, cell and tissue mechanics

  16. ELECTRICAL, COMPUTER, & ENERGY ENGINEERING

    E-Print Network [OSTI]

    Mojzsis, Stephen J.

    ELECTRICAL, COMPUTER, & ENERGY ENGINEERING GRADUATE STUDY GUIDE FALL 2014 ­ SPRING 2015 University of Colorado at Boulder Department of Electrical, Computer & Energy Engineering Graduate Office Campus Box 425

  17. COLLEGE OF ENGINEERING DEPARTMENT OF CHEMICAL ENGINEERING

    E-Print Network [OSTI]

    Zallen, Richard

    COLLEGE OF ENGINEERING DEPARTMENT OF CHEMICAL ENGINEERING BACHELOR OF SCIENCE IN CHEMICAL ENGINEERING FOR STUDENTS GRADUATING IN CALENDAR YEAR 2018 (CO-OP STUDENTS GRADUATING IN CALENDAR YEAR 2019 Credits CHEM 1035 General Chemistry Pre: None 3 CHEM 1036 General Chemistry Pre: None 3 CHEM 1045 General

  18. GEOMECHANICS RESEARCH Civil EngineeringCivil Engineering

    E-Print Network [OSTI]

    Levinson, David M.

    GEOMECHANICS RESEARCH Civil EngineeringCivil Engineering The Department ofThe Department of 2002 #12;Geomechanics at the University of Minnesota has its roots in the mining engineering and rock into the unified geomechanics program that exists today. Several significant contributions to the geomechanics

  19. Neurobiology Engineering Laboratory Department of Electrical and Computer Engineering

    E-Print Network [OSTI]

    Miller, Damon A.

    Neurobiology Engineering Laboratory Department of Electrical and Computer Engineering Mission and practice of electrical engineering, computer engineering, and computer science coupled with mathematics.miller@wmich.edu Electrical and Computer Engineering nonlinear circuits and systems, neural systems, artificial neural

  20. Engineering Ethics Book Engineering Ethics Concepts, Viewpoints, Cases and Codes

    E-Print Network [OSTI]

    Chen, Xinzhong

    Engineering Ethics Book Engineering Ethics ­ Concepts, Viewpoints, Cases and Codes 2nd edition - ©2008 A 372-page engineering ethics reference book published by the National Institute for Engineering Ethics Description of Contents: Engineering Ethics ­ Concepts, Viewpoints, Cases and Codes

  1. DEPARTMENT OF CHEMICAL ENGINEERING DEPARTMENT OF MECHANICAL AND INDUSTRIAL ENGINEERING

    E-Print Network [OSTI]

    Mountziaris, T. J.

    DEPARTMENT OF CHEMICAL ENGINEERING DEPARTMENT OF MECHANICAL AND INDUSTRIAL ENGINEERING University aims at a comprehensive introduction to the mechanical behavior of solid engineering materials utilized. Understanding of the mechanical behavior of solid engineering materials used in current materials engineering

  2. EngineeringEngineering the University of Tennesseethe University of Tennessee

    E-Print Network [OSTI]

    Tennessee, University of

    EngineeringMechanical Engineering Nuclear EngineeringNuclear Engineering Biosystems Engineering,develop, and design aircrafts research,develop, and design aircraft and spacecraft components and systems forand associated with propulsion,technologies associated with propulsion, airframe, avionics, aerodynamics, sensors

  3. Catalysts, systems and methods to reduce NOX in an exhaust gas stream

    DOE Patents [OSTI]

    Castellano, Christopher R. (Ringoes, NJ); Moini, Ahmad (Princeton, NJ); Koermer, Gerald S. (Basking Ridge, NJ); Furbeck, Howard (Hamilton, NJ)

    2010-07-20

    Catalysts, systems and methods are described to reduce NO.sub.x emissions of an internal combustion engine. In one embodiment, an emissions treatment system for an exhaust stream is provided having an SCR catalyst comprising silver tungstate on an alumina support. The emissions treatment system may be used for the treatment of exhaust streams from diesel engines and lean burn gasoline engines. An emissions treatment system may further comprise an injection device operative to dispense a hydrocarbon reducing agent upstream of the catalyst.

  4. Engine gaseous, aerosol precursor and particulate at simulated flight altitude conditions. Technical memo

    SciTech Connect (OSTI)

    Wey, C.C.

    1998-10-01

    The overall objective of the NASA Atmospheric Effects of Aviation Project (AEAP) is to develop scientific bases for assessing atmospheric impacts of the exhaust emissions by both current and future fleets of subsonic and supersonic aircraft. Among the six primary elements of the AEAP is Emissions Characterization. The objective of the Emission Characterization effort is to determine the exhaust emission constituents and concentrations at the engine exit plane. The specific objective of this engine test is to obtain a database of gaseous and particulate emissions as a function of fuel sulfur and engine operating conditions. The database of the particulate emission properties is to be used as a comparative baseline with subsequent flight measurement. The engine used in this test was a Pratt and Whitney F100-200E turbofan engine. Aviation fuel (Jet A) with a range of fuel sulfur was used. Low and high sulfur values are limited by commercially available fuels and by fuel specification limits of 0.3% by weight. Test matrix was set by parametrically varying the combustor inlet temperature (T3) between idle and maximum power setting at simulated SLS and up to five other altitudes for each fuel. Four diagnostic systems, extractive and non-intrusive, were assembled for the gaseous and particulate emissions characterization measurements study. NASA extractive system includes smoke meter and analyzers for measurement of CO, CO{sub 2}, NO, NOx, O{sub 2}, total unburnt hydrocarbons (THC), and SO{sub 2}. Particulate emissions were characterized by University of Missouri-Rolla Mobile Aerosol Sampling System.

  5. Acoustic cooling engine

    DOE Patents [OSTI]

    Hofler, Thomas J. (Los Alamos, NM); Wheatley, John C. (Los Alamos, NM); Swift, Gregory W. (Santa Fe, NM); Migliori, Albert (Santa Fe, NM)

    1988-01-01

    An acoustic cooling engine with improved thermal performance and reduced internal losses comprises a compressible fluid contained in a resonant pressure vessel. The fluid has a substantial thermal expansion coefficient and is capable of supporting an acoustic standing wave. A thermodynamic element has first and second ends and is located in the resonant pressure vessel in thermal communication with the fluid. The thermal response of the thermodynamic element to the acoustic standing wave pumps heat from the second end to the first end. The thermodynamic element permits substantial flow of the fluid through the thermodynamic element. An acoustic driver cyclically drives the fluid with an acoustic standing wave. The driver is at a location of maximum acoustic impedance in the resonant pressure vessel and proximate the first end of the thermodynamic element. A hot heat exchanger is adjacent to and in thermal communication with the first end of the thermodynamic element. The hot heat exchanger conducts heat from the first end to portions of the resonant pressure vessel proximate the hot heat exchanger. The hot heat exchanger permits substantial flow of the fluid through the hot heat exchanger. The resonant pressure vessel can include a housing less than one quarter wavelength in length coupled to a reservoir. The housing can include a reduced diameter portion communicating with the reservoir. The frequency of the acoustic driver can be continuously controlled so as to maintain resonance.

  6. Combustion optimization in a hydrogen-enhanced lean burn SI engine

    E-Print Network [OSTI]

    Goldwitz, Joshua A. (Joshua Arlen), 1980-

    2004-01-01

    Lean operation of spark ignition (SI) automotive engines offers attractive performance incentives. Lowered combustion temperatures inhibit NO[sub]x pollutant formation while reduced manifold throttling minimizes pumping ...

  7. Predicting the behavior of a lean-burn hydrogen-enhanced engine concept

    E-Print Network [OSTI]

    Ivanic, Žiga, 1978-

    2004-01-01

    (cont.) Lean operation of a spark ignition (SI) internal combustion engine (ICE) offers attractive performance incentives. Lowered combustion temperatures inhibit formation of nitrogen oxides (NOx), while reduced intake ...

  8. Hybrid reduced order modeling for assembly calculations

    SciTech Connect (OSTI)

    Bang, Y.; Abdel-Khalik, H. S.; Jessee, M. A.; Mertyurek, U.

    2013-07-01

    While the accuracy of assembly calculations has considerably improved due to the increase in computer power enabling more refined description of the phase space and use of more sophisticated numerical algorithms, the computational cost continues to increase which limits the full utilization of their effectiveness for routine engineering analysis. Reduced order modeling is a mathematical vehicle that scales down the dimensionality of large-scale numerical problems to enable their repeated executions on small computing environment, often available to end users. This is done by capturing the most dominant underlying relationships between the model's inputs and outputs. Previous works demonstrated the use of the reduced order modeling for a single physics code, such as a radiation transport calculation. This manuscript extends those works to coupled code systems as currently employed in assembly calculations. Numerical tests are conducted using realistic SCALE assembly models with resonance self-shielding, neutron transport, and nuclides transmutation/depletion models representing the components of the coupled code system. (authors)

  9. Industrial Assessment Centers - Small Manufacturers Reduce Energy & Increase Productivity

    SciTech Connect (OSTI)

    2015-11-06

    Since 1976, the Industrial Assessment Centers (IACs), administered by the US Department of Energy, have supported small and medium-sized American manufacturers to reduce energy use and increase their productivity and competitiveness. The 24 IACs, located at premier engineering universities around the country (see below), send faculty and engineering students to local small and medium-sized manufacturers to provide no-cost assessments of energy use, process performance and waste and water flows. Under the direction of experienced professors, IAC engineering students analyze the manufacturer’s facilities, energy bills and energy, waste and water systems, including compressed air, motors/pumps, lighting, process heat and steam. The IACs then follow up with written energy-saving and productivity improvement recommendations, with estimates of related costs and payback periods.

  10. Assessment of reduced mechanisms using One Dimensional Stochastic Turbulence model

    E-Print Network [OSTI]

    Chien, Li-Chun

    2010-01-01

    combustion engines, gas turbine engines, and industrialSI) engines and gas-turbine engines. In SI engines, theGas turbines are primarily used in aircraft engines but also

  11. Engineering Physics University of Saskatchewan

    E-Print Network [OSTI]

    Saskatchewan, University of

    Engineering Physics at the University of Saskatchewan Professor Adam Bouras adam.bourassa@usask. #12;What is Engineering Physics? A bridge between engineering and pure science Physics + Engineering + Mathematics Fundamental physics and math combined with engineering and problem solving analytical

  12. Introduction to Engineering and Forestry

    E-Print Network [OSTI]

    Hickman, Mark

    in Mechatronics Engineering. Published April 2015 by the University of Canterbury, Private Bag 4800, Christchurch Engineering 17 Mechatronics Engineering 17 Natural Resources Engineering 18 Software Engineering 18 Forestry, Chemical and Process, Computer, Electrical and Electronic, Forest, Mechanical, Mechatronics, Natural

  13. BIOMEDICAL ENGINEERING Program of Study

    E-Print Network [OSTI]

    Thomas, Andrew

    BIOMEDICAL ENGINEERING Program of Study Applying Correspondence Graduate Faculty The Graduate School of Biomedical Science & Engineering (GSBSE) offers a doctoral degree in Biomedical Engineering. Biomedical Engineering may be defined as the application of engineering principles to promote and enhance

  14. Mechanical & Aerospace Engineering

    E-Print Network [OSTI]

    Mechanical & Aerospace Engineering We introduce phonon recycling (local reabsorption of emitted) is Professor in Department of Mechanical Engineering and in Applied Physics Program, University of Michigan of Mechanical Engineering University of Michigan November 1, 2013 at 1:30pm in SCOB 228 School for Engineering

  15. Mechanical Engineering Graduate Student

    E-Print Network [OSTI]

    Wisconsin at Madison, University of

    Mechanical Engineering Graduate Student Handbook January 2015 Department of Mechanical Engineering University of Wisconsin-Madison #12;1 Mechanical Engineering Web Page: http://www.engr.wisc.edu/me Graduate & Terrace Chairs) and Samantha Stepp (ME Building) #12;2 Department of Mechanical Engineering AGUIDE

  16. Engineering & the Environment

    E-Print Network [OSTI]

    Molinari, Marc

    (A&C) MSc Race car Aerodynamics (RCA) MSc Space Systems Engineering (SSE) MSc Unmanned VehicleEngineering & the Environment Aerospace Engineering MSc Programmes MSc Aerodynamics & Computation to the Faculty of Engineering & the Environment. We hope that you will find your stay here in Southampton both

  17. Materials Science & Engineering

    E-Print Network [OSTI]

    Capecchi, Mario R.

    -twines numerous disciplines, including chemistry, physics and engineering. It is the one discipline within an engineering degree. Materials Scientists apply the principles of physics and chemistry to engineering problemsMaterials Science & Engineering 2015-2016 Undergraduate Handbook The University of Utah #12

  18. CIVIL & ENVIRONMENTAL ENGINEERING

    E-Print Network [OSTI]

    Berdichevsky, Victor

    1 CIVIL & ENVIRONMENTAL ENGINEERING GRADUATE HANDBOOK (REVISED 8/25/14) 2100 Engineering 5050.wayne.edu/cee/ #12;2 Purpose The purpose of this handbook is to provide Civil and Environmental Engineering Graduate the scope of this handbook. This handbook can be downloaded from the department web site, http://engineering.wayne.edu/cee/gr_civil

  19. Engineering Industrial & Systems

    E-Print Network [OSTI]

    Berdichevsky, Victor

    Industrial Engineering Department of Industrial & Systems Engineering Leslie Monplaisir, Ph powerful tool sets used in industry today. -Brent Gillett, BSIE 2007 Advanced Planning Engineer at BMW I is available at: http://ise.wayne.edu/bs-industrial/index What is Industrial Engineering? The industrial

  20. WORKSHOP ON CONSTRUCTION ENGINEERING

    E-Print Network [OSTI]

    Tommelein, Iris D.

    WORKSHOP ON CONSTRUCTION ENGINEERING BASIC RESEARCH Final Report Robert I. Carr William F. Maloney September, 1982 THE UNIVERSITY OF MICHIGAN DEPARTMENT OF CIVIL ENGINEERING CONSTRUCTION ENGINEERING on Construction Engineering Basic Research Final Report Held at The University of Michigan Ann Arbor, Michigan May

  1. Mechanical Engineering David Sumner

    E-Print Network [OSTI]

    Saskatchewan, University of

    Mechanical Engineering David Sumner david.sumner@usask.ca #12;Mechanical Engineering? · Design, production and use of mechanical systems that control and transform energy · Focused on engineering systems that involve heat, energy and motion · The broadest engineering discipline #12;Subject Areas · Fluid mechanics

  2. ARMOUR COLLEGE OF ENGINEERING

    E-Print Network [OSTI]

    Heller, Barbara

    ARMOUR COLLEGE OF ENGINEERING Strategic Plan Summary #12;Armour College of Engineering Strategic Plan Summary | 1 ARMOUR COLLEGE OF ENGINEERING STRATEGIC PLAN SUMMARY Undergraduate Education At Armour-focused education with a renewed emphasis on the entrepreneurial and ethical practice of engineering. An Armour

  3. TO TRANSFORM BIOMEDICAL ENGINEERING

    E-Print Network [OSTI]

    Bermúdez, José Luis

    IT'S TIME TO TRANSFORM BIOMEDICAL ENGINEERING EDUCATION #12;Charles H. & Bettye Barclay Professor Head, Department of Biomedical Engineering Texas A&M University We're dedicated to solving the world in biomedical engineering research and education ­ and we're well on our way. Our faculty continues to engineer

  4. Biomolecular Engineering Zengyi Shao

    E-Print Network [OSTI]

    Zhao, Huimin

    Biomolecular Engineering Zengyi Shao Ee Lui Ang Huimin Zhao Department of Chemical and Biomolecular Engineering, University of Illinois, Urbana, Illinois, U.S.A. INTRODUCTION Biomolecular engineering is an emerging field of academic research and industrial practice having the goal of engineering value

  5. Mechanical Engineering Assistant Professor

    E-Print Network [OSTI]

    Chandy, John A.

    Mechanical Engineering Xu Chen Assistant Professor xchen@uconn.edu http://xchen.lab.uconn.edu From Engineering Ingredients of Kung Pao Chicken Marinade · 1 tablespoon soy sauce · 2 teaspoons Chinese rice wine of Diana Kuan #12;Mechanical Engineering The Cooking Procedure #12;Mechanical Engineering The Difference

  6. College of Engineering THOROUGHTHOROUGH

    E-Print Network [OSTI]

    Saskatchewan, University of

    College of Engineering THOROUGHTHOROUGH THE RON AND JANE GRAHAM SCHOOL OF PROFESSIONAL DEVELOPMENT of Engineering THOROUGHUNIVERSITY OF SASKATCHEWAN COLLEGE OF ENGINEERING MAGAZINE 2015 EDITOR Kate Blau is the communications officer in the College of Engineering. DESIGN Malary Cloke is a publications officer in Marketing

  7. COLLEGE OF ENGINEERING Infrastructure

    E-Print Network [OSTI]

    Collett Jr., Jeffrey L.

    COLLEGE OF ENGINEERING Infrastructure #12;2 COLLEGE OF ENGINEERING This publication focuses on just a few of the incredible College of Engineering faculty and students who are conducting research related, and students in the Department of Civil and Environmental Engineering are working collaboratively to develop

  8. Mechanical & Aerospace Engineering

    E-Print Network [OSTI]

    Mechanical & Aerospace Engineering The presentation will first review emerging joint time in Mechanical Engineering and Engineering Science from the Technical University in Athens, Greece and his, vehicle engineering, bio-mechanics, and composite materials. He is Editor-in-Chief of the International

  9. SPRING 2007 METRICSMECHANICAL ENGINEERING

    E-Print Network [OSTI]

    Li, Teng

    OF ENGINEERING, UNIVERSITY OF MARYLAND. Department Works Globally to Share Knowledge & Expertise IN THIS ISSUE: 2SPRING 2007 METRICSMECHANICAL ENGINEERING A. JAMES CLARK SCHOOL of ENGINEERING www.enme.umd.edu A NEWSLETTER FOR ALUMNI AND FRIENDS OF THE DEPARTMENT OF MECHANICAL ENGINEERING AT THE A. JAMES CLARK SCHOOL

  10. STUDENT HANDBOOK MECHANICAL ENGINEERING

    E-Print Network [OSTI]

    Krstic, Miroslav

    accredited programs) Aerospace and Mechanical Engineering: · An ability to apply knowledge of mathematics-long learning. · A knowledge of contemporary issues. · An ability to use modern engineering techniques, skills, and computing tools necessary for engineering practice. Additionally: Aerospace Engineering · Knowledge of key

  11. Engineering & the Environment

    E-Print Network [OSTI]

    Molinari, Marc

    ; Semester in Industry; Semester Abroad; Sustainable Energy Systems) Programme Handbook (USMC) 2014 Engineering; Computational Engineering and Design; Engineering Management; Mechatronics; Naval Engineering.4 Additional Costs 9 4.5 USMC Key Dates 9, 10 5. Faculty Teaching and Learning Skills 10 5.1 Time management 10

  12. ENGINEERING HOWARD R. HUGHES

    E-Print Network [OSTI]

    Hemmers, Oliver

    ENGINEERING College of HOWARD R. HUGHES HigHligHts At the Howard R. Hughes College of Engineering is an integral part of engineering studies, we also provide students with a superb technical education and strong of Energy Solar Decathlon 2013. Engineering and architecture students will design then build and operate

  13. ENGINEERING MANAGEMENT AND LEADERSHIP

    E-Print Network [OSTI]

    Eagar, Thomas W.

    ENGINEERING MANAGEMENT AND LEADERSHIP Where did we come from? Where are we going? How do we get · If it works but no one knows why, it's ENGINEERING #12;The scientist explains that which exists; The engineer creates that which never was. Theodore von Karman #12;Engineer - Noun (from French "to contrive

  14. Engineering and Mineral Resources

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    News ????????????????? ® College of Engineering and Mineral Resources Winter 2008 table of contents. . . . . . . . . . . . . . . . . . . . 7 wvCROSSROADS DepartmentofCivilandEnvironmentalEngineering Civil engineering exchange program and environmental engineering with a focus in transportation will have the opportunity to study abroad as part

  15. Engineering and Architecture (FEA)

    E-Print Network [OSTI]

    Faculty of Engineering and Architecture (FEA) #12;362 Faculty of Engineering and Architecture (FEA) Undergraduate Catalogue 2014­15 Faculty of Engineering and Architecture (FEA) Officers of the Faculty Peter F as 1913 the University recognized the need for engineering education and training in the Middle East

  16. Iowa State University Engineering

    E-Print Network [OSTI]

    Lin, Zhiqun

    1 Iowa State University Engineering Student Clubs Engineering Student CouncilIowa State University #12;2 AirISU Pg. 4 Alpha Pi Mu Industrial Engineering Honor Society (APM) Pg. 4 American Institute of Aeronautics and Astronautics (AIAA) Pg. 5 American Society of Agricultural and Biological Engineers (ASABE) Pg

  17. Boazii University Biomedical Engineering

    E-Print Network [OSTI]

    Boaziçi University Institute of Biomedical Engineering Guide for MSc and PhD Applicants #12;Institute of Biomedical Engineering The Institute of Biomedical Engineering at Boaziçi University of Biomedical Engineering offers a variety of education programs and research facilities, leading to MS and Ph

  18. Reduced shedding regenerator and method

    DOE Patents [OSTI]

    Qiu, Songgang (Richland, WA); Augenblick, John E. (Richland, WA); Erbeznik, Raymond M. (Kennewick, WA)

    2007-05-22

    A reduced shedding regenerator and method are disclosed with regenerator surfaces to minimize shedding of particles from the regenerator thereby alleviating a source of potential damage and malfunction of a thermal regenerative machine using the regenerator.

  19. The combinatorics of reduced decompositions

    E-Print Network [OSTI]

    Tenner, Bridget Eileen

    2006-01-01

    This thesis examines several aspects of reduced decompositions in finite Coxeter groups. Effort is primarily concentrated on the symmetric group, although some discussions are subsequently expanded to finite Coxeter groups ...

  20. Combustion and Magnetohydrodynamic Processes in Advanced Pulse Detonation Rocket Engines

    E-Print Network [OSTI]

    Cole, Lord Kahil

    2012-01-01

    Engine Impulse andDetonation Engines . . . . . . . . . . . . . . . . . . . .on Detonation Engine Concepts . . . . . . . . . . . . . .

  1. Features of an Atkinson two-stroke engine

    SciTech Connect (OSTI)

    Brooks, J.; Lane, A.

    1994-09-01

    A two-stroke Atkinson cycle engine is described. The engine has uniflow stratified mixture scavenging with a variably phased spherical rotary valve in the cylinder head and exhaust ports in the cylinder wall. These features combined in this configuration result in reduced fuel consumption, higher specific power output, less vibration, and smooth part load operation albeit increased size and cost compared to simple two-stroke engines used in power tools. 29 refs., 4 figs., 1 tab.

  2. U.S. Army Engineer Research and Development Center

    E-Print Network [OSTI]

    US Army Corps of Engineers

    U.S. Army Engineer Research and Development Center 27 Oct 2014 http://www is developing WaveNet and TideNet, two web-based toolss to access, visualize, and process wind, wave, and tide technologies provide more accurate and cost-effective engineering solutions to reduce operation and maintenance

  3. Engineering in Entertainment Engineering Challenge Camp

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    .m. Film Production Studio Tour Joe Web--University Relations 3:00 p.m. Travel Back to Engineering Day Time

  4. 2003 Peered Reviewed Archival Publications Chemical Engineering

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    2003 Peered Reviewed Archival Publications Chemical Engineering Cho, E.H. and R. Chamarthy. 2003 for methane reforming with carbon dioxide over a mixed-metal carbide catalyst. I&EC Research 42: 2712-2721. Li-reduced, activated-carbon-supported, molybdenum-based catalysts. Molecules 8: 13-30. Dadyburjor, D.B. and Z.Y. Liu

  5. Piston rod seal for a Stirling engine

    DOE Patents [OSTI]

    Shapiro, Wilbur (Schenectady, NY)

    1984-01-01

    In a piston rod seal for a Stirling engine, a hydrostatic bearing and differential pressure regulating valve are utilized to provide for a low pressure differential across a rubbing seal between the hydrogen and oil so as to reduce wear on the seal.

  6. Reduced waste generation, FY 1986

    SciTech Connect (OSTI)

    Not Available

    1986-02-01

    The United States Department of Energy is committed to the principles of minimizing the quantity and transuranic content of its transuranium (TRU) waste being generated at its nuclear facilities. The reasons are to reduce costs associated with waste handling and disposal, and also to reduce radiation exposure to workers and risk for radionuclide release to man and the environment. The purpose of this document is to provide the USDOE with a plan of research and development tasks for waste minimization, and is prepared so as to provide the maximum impact on volumes based on cost/benefit factors. The document is to be updated annually or as needed to reflect current and future tasks. The Reduced Waste Generation (RWG) tasks encompass a wide range of activities with the principal goals of (1) preventing the generation of waste and (2) converting TRU waste into low-level wastes (LLW) by sorting or decontamination. Concepts for reducing the volume such as in incineration and compaction are considered within the discipline of Reduced Waste Generation, but are considered as somewhat developed technology with only a need for implementation. 33 refs.

  7. Tumor Engineering: The Other Face of Tissue Engineering

    E-Print Network [OSTI]

    Ghajar, Cyrus M

    2010-01-01

    Vacanti, J.P. Tissue engineering. Science 260, 920, 1993. 2.dynamic reciprocity: engineering three-dimensional cultureRonnov-Jessen, L. TUMOR ENGINEERING: OTHER FACE OF TISSUE

  8. Department of Civil and Environmental Engineering Environmental Engineering Program

    E-Print Network [OSTI]

    Bertini, Robert L.

    Department of Civil and Environmental Engineering Environmental Engineering Program pdx-223 General Education Requirements (please see PSU Bulletin for details) Engineering / Computer Science

  9. Reduce air, reduce compliance cost new patented spray booth technology

    SciTech Connect (OSTI)

    McGinnis, F.

    1997-12-31

    A New Paint Spray Booth System that dramatically reduces air volumes normally required for capturing and controlling paint overspray that contains either Volatile Organic Compounds (VOC) or Hazardous Air Pollutants (HAP), or both. In turn, a substantial reduction in capital equipment expenditures for air abatement systems and air make-up heaters as well as related annual operating expenses is realized.

  10. Chemical Engineering and Materials Science

    E-Print Network [OSTI]

    Berdichevsky, Victor

    Chemical Engineering and Materials Science COLLEGE of ENGINEERING DepartmentofChemicalEngineering-credit EDGE Engineering Entrepreneur Certificate Program is a great addition to a chemical engineering t engineering.wayne.edu/che #12;What is chemical engineering? Imagine saving the lives of pediatric patients

  11. COLLEGE OF ENGINEERING & COMPUTER SCIENCE

    E-Print Network [OSTI]

    Wu, Shin-Tson

    and Computer Engineering Industrial Engineering and Management Systems Materials Science and Engineering.S. Environmental Engineering, B.S., M.S., Ph.D. Industrial Engineering, B.S., M.S., Ph.D. Information Technology, B2013-14 COLLEGE OF ENGINEERING & COMPUTER SCIENCE FAST FACTS UNIVERSITY OF CENTRAL FLORIDA ORLANDO

  12. 07SCHOOL OF MECHANICAL ENGINEERING

    E-Print Network [OSTI]

    Dimitrova, Vania

    07SCHOOL OF MECHANICAL ENGINEERING UNDERGRADUATE DEGREES School of Mechanical Engineering FACULTY OF ENGINEERING Undergraduate Degrees 2015 #12;www.engineering.leeds.ac.uk/mechanical UNDERGRADUATE DEGREES SCHOOL OF MECHANICAL ENGINEERING The School of Mechanical Engineering offers both a broad mechanical engineering degree

  13. FY11 annual Report: PHEV Engine Control and Energy Management Strategy

    SciTech Connect (OSTI)

    Chambon, Paul H

    2011-10-01

    Objectives are to: (1) Investigate novel engine control strategies targeted at rapid engine/catalyst warming for the purpose of mitigating tailpipe emissions from plug-in hybrid electric vehicles (PHEV) exposed to multiple engine cold start events; and (2) Validate and optimize hybrid supervisory control techniques developed during previous and on-going research projects by integrating them into the vehicle level control system and complementing them with the modified engine control strategies in order to further reduce emissions during both cold start and engine re-starts. Approach used are: (1) Perform a literature search of engine control strategies used in conventional powertrains to reduce cold start emissions; (2) Develop an open source engine controller providing full access to engine control strategies in order to implement new engine/catalyst warm-up behaviors; (3) Modify engine cold start control algorithms and characterize impact on cold start behavior; and (4) Develop an experimental Engine-In-the-Loop test stand in order to validate control methodologies and verify transient thermal behavior and emissions of the real engine when combined with a virtual hybrid powertrain. Some major accomplishments are: (1) Commissioned a prototype engine controller on a GM Ecotec 2.4l direct injected gasoline engine on an engine test cell at the University of Tennessee. (2) Obtained from Bosch (with GM's approval) an open calibration engine controller for a GM Ecotec LNF 2.0l Gasoline Turbocharged Direct Injection engine. Bosch will support the bypass of cold start strategies if calibration access proves insufficient. The LNF engine and its open controller were commissioned on an engine test cell at ORNL. (3) Completed a literature search to identify key engine cold start control parameters and characterized their impact on the real engine using the Bosch engine controller to calibrate them. (4) Ported virtual hybrid vehicle model from offline simulation environment to real-time Hardware-In-the-Loop platform.

  14. Microbial methods of reducing technetium

    DOE Patents [OSTI]

    Wildung, Raymond E. (Richland, WA) [Richland, WA; Garland, Thomas R. (Greybull, WY) [Greybull, WY; Gorby, Yuri A. (Richland, WA) [Richland, WA; Hess, Nancy J. (Benton City, WA) [Benton City, WA; Li, Shu-Mei W. (Richland, WA) [Richland, WA; Plymale, Andrew E. (Richland, WA) [Richland, WA

    2001-01-01

    The present invention is directed toward a method for microbial reduction of a technetium compound to form other compounds of value in medical imaging. The technetium compound is combined in a mixture with non-growing microbial cells which contain a technetium-reducing enzyme system, a stabilizing agent and an electron donor in a saline solution under anaerobic conditions. The mixture is substantially free of an inorganic technetium reducing agent and its reduction products. The resulting product is Tc of lower oxidation states, the form of which can be partially controlled by the stabilizing agent. It has been discovered that the microorganisms Shewanella alga, strain Bry and Shewanelia putrifacians, strain CN-32 contain the necessary enzyme systems for technetium reduction and can form both mono nuclear and polynuclear reduced Tc species depending on the stabilizing agent.

  15. The Phillips Stirling engine

    SciTech Connect (OSTI)

    Hargreaves, C.M.

    1991-01-01

    This book is about the Stirling engine and its development from the heavy cast-iron machine of the 19th century to that of today. It is a history of a research effort spanning nearly 50 years, together with an outline of principles, and some technical details and descriptions of the more important engines. Contents include: the hot-air engine; the 20th-century revival; the Stirling cycle; rhombic-drive engines; heating and cooling; pistons and seals; electric generators and heat pumps; exotic heat sources; the engine and the environment; swashplate engines; and the past and the future.

  16. Nuclear engine system simulation (NESS) program update

    SciTech Connect (OSTI)

    Scheil, C.M.; Pelaccio, D.G. (Science Applications International Corporation, 10717 Griffith Park Drive NE, Albuquerque, NM 87123 (United States)); Petrosky, L.J. (Westinghouse Electric Corporation, Advanced Energy Systems, Waltz Mill Site Madison, PA 15663 (United States))

    1993-01-20

    The second phase of development of a Nuclear Thermal Propulsion (NTP) engine system design analysis code has been completed. The standalone, versatile Nuclear Engine System Simulation (NESS) code provides an accurate, detailed assessment of engine system operating performance, weight, and sizes. The critical information is required to support ongoing and future engine system and stage design study efforts. This recent development effort included incorporation of an updated solid-core nuclear thermal reactor model that yields a reduced core weight and higher fuel power density when compared to a NERVA type reactor. NESS can now analyze expander, gas generator, and bleed cycles, along with multi-redundant propellant pump feed systems. Performance and weight of efficient multi-stage axial turbopump can now be determined, in addition to the traditional centrifugal pump.

  17. Provided to Michigan State University as an example system description for educational purposes only. All questions should be directed to the instructor, Dr. Betty H.C. Cheng at Michigan State University.

    E-Print Network [OSTI]

    idle when the vehicle is stopped, the average car's fuel economy will improve by about 3.5 %. While emissions are reduced by approximately 4%, making this a truly green technology. Assisted Direct Start emissions. The engine is automatically restarted when the driver releases the brake and engages the gas

  18. LOW-ENGINE-FRICTION TECHNOLOGY FOR ADVANCED NATURAL-GAS RECIPROCATING ENGINES

    SciTech Connect (OSTI)

    Victor W. Wong; Tian Tian; Grant Smedley

    2003-08-28

    This program aims at improving the efficiency of advanced natural-gas reciprocating engines (ANGRE) by reducing piston/ring assembly friction without major adverse effects on engine performance, such as increased oil consumption and emissions. A detailed set of piston/ring dynamic and friction models have been developed and applied that illustrated the fundamental relationships between design parameters and friction losses. Various low-friction strategies and concepts have been explored, and engine experiments will validate these concepts. An iterative process of experimentation, simulation and analysis, will be followed with the goal of demonstrating a complete optimized low-friction engine system. As planned, MIT has developed guidelines for an initial set of low-friction piston-ring-pack designs. Current recommendations focus on subtle top-piston-ring and oil-control-ring characteristics. A full-scale Waukesha F18 engine has been installed at Colorado State University and testing of the baseline configuration is in progress. Components for the first design iteration are being procured. Subsequent work includes examining the friction and engine performance data and extending the analyses to other areas to evaluate opportunities for further friction improvement and the impact on oil consumption/emission and wear, towards demonstrating an optimized reduced-friction engine system.

  19. Reactivation of an idle lease to increase heavy oil recovery through application of conventional steam drive technology in a low dip slope and basin reservoir in the Midway-Sunset Field, San Jaoquin Basin, California

    SciTech Connect (OSTI)

    Schamel, S.

    1996-11-01

    This project reactivates ARCO`s idle Pru Fee lease in the Midway- Sunset field, California and conducts a continuous steamflood enhanced oil recovery demonstration aided by an integration of modern reservoir characterization and simulation methods. Cyclic steaming is being used to reestablish baseline production within the reservoir characterization phase of the project. During the demonstration phase scheduled to begin in January 1997, a continuous steamflood enhanced oil recovery will be initiated to test the incremental value of this method as an alternative to cyclic steaming. Other economically marginal Class III reservoirs having similar producibility problems will benefit from insight gained in this project. The objectives of the project are: (1) to return the shut-in portion of the reservoir to optimal commercial production; (2) to accurately describe the reservoir and recovery process; and (3) to convey the details of this activity to the domestic petroleum industry, especially to other producers in California, through an aggressive technology transfer program. One of the main objectives of Budget Period I was to return the Pru Fee property to economic production and establish a baseline productivity with cyclic steaming. By the end of the second quarter 1996, all Pru producers except well 101 had been cyclic steamed two times. Each steam cycle was around 10,000 barrels of steam (BS) per well. No mechanical problems were found in the existing old wellbores. Conclusion is after several years of being shut-in, the existing producers on the Pru lease are in reasonable mechanical condition, and can therefore be utilized as viable producers in whatever development plan we determine is optimum. Production response to cyclic steam is very encouraging in the new producer, however productivity in the old producers appears to be limited in comparison.

  20. Fall 2012 College of engineering

    E-Print Network [OSTI]

    Berdichevsky, Victor

    · Fall · · 2012 · College of engineering Eranda Nikolla Turning greenhouse gases into fuels thatcan statistics.....................................................14 Commencement, Order of the Engineer, POET ................................................................18 Biomedical engineering..............................................................19 Chemical

  1. Interfacial Engineering of Molecular Photovoltaics

    E-Print Network [OSTI]

    Shelton, Steven Wade

    2014-01-01

    Engineering of Molecular Photovoltaics by Steven WadeEngineering of Molecular Photovoltaics Copyright © 2014 byEngineering of Molecular Photovoltaics by Steven Wade

  2. Systems Engineering Handbook Foreword ................................ ................................ ................................ ............................ ix

    E-Print Network [OSTI]

    Rhoads, James

    NASA Systems Engineering Handbook SP-610S June 1995 #12;Contents Foreword ................................ ................................ ................................ .... 1 Fundamentals of System Engineering ................................ ............................ 3 Definition of Systems Engineering

  3. Engineering Cellulase Enzymes for Bioenergy

    E-Print Network [OSTI]

    Atreya, Meera Elizabeth

    2015-01-01

    25. Becker, D. et al. Engineering of a glycosidase Family 7Engineering Cellulase Enzymes for Bioenergy By MeeraSummer 2015 Abstract Engineering Cellulase Enzymes for

  4. ENGINEERING GRaduatE PRoGRams Biological SyStemS engineering Biomedical engineering chemical engineering civil and environmental engineering

    E-Print Network [OSTI]

    California at Davis, University of

    ENGINEERING GRaduatE PRoGRams Biological SyStemS engineering § Biomedical engineering § chemical engineering § civil and environmental engineering computer Science § electrical and computer engineering § materialS Science and engineering mechanical and aeronautical engineering § tranSportation technology

  5. Unconventional Groundwater System Proves Effective in Reducing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Unconventional Groundwater System Proves Effective in Reducing Contamination at West Valley Demonstration Project Unconventional Groundwater System Proves Effective in Reducing...

  6. Web Service Engineering with DIWE Engin Kirda

    E-Print Network [OSTI]

    Kruegel, Christopher

    Web Service Engineering with DIWE Engin KirdaÂŁ , Clemens KererÂŁ , Christopher KruegelĂ? and Roman 93106, USA chris@cs.ucsb.edu Abstract A Web service is frequently defined as browser-less ac- cess to content on a Web site. The industry's focus to date has been on providing easy-to-use low-level libraries

  7. Reduced Harmonic Representation of Partitions

    E-Print Network [OSTI]

    Michalis Psimopoulos

    2011-03-08

    In the present article the reduced integral representation of partitions in terms of harmonic products has been derived first by using hypergeometry and the new concept of fractional sum and secondly by studying the Fourier series of the kernel function appearing in the integral representation. Using the method of induction, a generalization of the theory has also been obtained.

  8. CORRESPONDENCE Reduced major axis regression

    E-Print Network [OSTI]

    CORRESPONDENCE Reduced major axis regression and the island rule The Ôisland ruleŐ describes). The slope of the least-squares regression of Y on X, b, measures the extent to which large body sizes tend- ferent way, as the regression of Y ) X on X, and here the slope (b˘) is generally negative (b˘ = b ) 1

  9. Reduced-vibration tube array

    DOE Patents [OSTI]

    Bruck, Gerald J.; Bartolomeo, Daniel R.

    2004-07-20

    A reduced-vibration tube array is disclosed. The array includes a plurality of tubes in a fixed arrangement and a plurality of damping members positioned within the tubes. The damping members include contoured interface regions characterized by bracing points that selectively contact the inner surface of an associated tube. Each interface region is sized and shaped in accordance with the associated tube, so that the damping member bracing points are spaced apart a vibration-reducing distance from the associated tube inner surfaces at equilibrium. During operation, mechanical interaction between the bracing points and the tube inner surfaces reduces vibration by a damage-reducing degree. In one embodiment, the interface regions are serpentine shaped. In another embodiment, the interface regions are helical in shape. The interface regions may be simultaneously helical and serpentine in shape. The damping members may be fixed within the associated tubes, and damping member may be customized several interference regions having attributes chosen in accordance with desired flow characteristics and associated tube properties.

  10. Mechanical & Aerospace Engineering

    E-Print Network [OSTI]

    Mechanical & Aerospace Engineering With the increases in computational power and numerical methods a series of research challenges. These challenges involve many branches of mechanical engineering: mechanics, dynamics, tribology, statistical modeling, experimentation, and numerical methods. During

  11. Environmental Engineers - 41 

    E-Print Network [OSTI]

    Unknown

    2011-08-17

    or Engine ? . Absorption uses the most environmentally friendly refrigerant - water. . Absorption chillers are chiller/heaters Absorption chillers are manufactured by the four US major manufacturers Absorption chillers have few moving parts . Engine chillers...

  12. Engine lubrication oil aeration

    E-Print Network [OSTI]

    Baran, Bridget A. (Bridget Anne)

    2007-01-01

    The lubrication system of an internal combustion engine serves many purposes. It lubricates moving parts, cools the engine, removes impurities, supports loads, and minimizes friction. The entrapment of air in the lubricating ...

  13. Engineering & the Environment

    E-Print Network [OSTI]

    Molinari, Marc

    Engineering & the Environment Energy MSc Programmes MSc Energy & Sustainability (Including Energy, Resources and Climate Change; Energy, Environment and Buildings) MSc Sustainable Energy Technologies (SET of aeronautics & astronautics, mechanical engineering, ship science; audiology and acoustics; and civil

  14. Nuclear Science and Engineering

    E-Print Network [OSTI]

    Bahler, Dennis R.

    Nuclear Science and Engineering Education Sourcebook 2014 American Nuclear Society US Department of Energy #12;Nuclear Science & Engineering Education Sourcebook 2014 North American Edition American Nuclear Society Education, Training, and Workforce Division US Department of Energy Office of Nuclear

  15. College of Engineering Graduate assistantship positions in Structural Engineering

    E-Print Network [OSTI]

    Rasheed, Khaled

    College of Engineering Graduate assistantship positions in Structural Engineering Description: Graduate research assistantships are available in the area of Structural Engineering in the College of Engineering at the University of Georgia. The graduate research assistantship includes a monthly stipend

  16. Systems Engineering Integrating Project Management, Science, Engineering, and

    E-Print Network [OSTI]

    Mojzsis, Stephen J.

    Systems Engineering Integrating Project Management, Science, Engineering, and Mission Operations Systems Engineering Experience LASP is a full-cycle space research institute, combining all aspects of space exploration through our expertise in science, engineering, mission operations, data analysis

  17. Petroleum Engineering 416 Solving Common Production Engineering Problems

    E-Print Network [OSTI]

    42 Petroleum Engineering 416 Solving Common Production Engineering Problems Credit 3: (3-0) Satisfies Technical Elective Requirement Catalog Description: Application of petroleum engineering tools, methods, and techniques to solve real problems that petroleum engineers encounter in the course

  18. MASTERCivil Engineering Department of Civil, Environmental and Geomatic Engineering

    E-Print Network [OSTI]

    MASTERCivil Engineering Department of Civil, Environmental and Geomatic Engineering Master of Science in Civil Engineering #12;Designing and Maintaining our Living Space The ETH Master programme in Civil Engineering provides an excellent university education for designers and managers creating our

  19. Ecological Engineering and Sustainability: A New Opportunity for Chemical Engineering

    E-Print Network [OSTI]

    Stouffer, Daniel B.

    Ecological Engineering and Sustainability: A New Opportunity for Chemical Engineering Daniel B Engineering, Northwestern University, Evanston, IL 60208, and Northwestern Institute on Complex Systems InterScience (www.interscience.wiley.com). Keywords: ecological engineering, food webs, contaminant

  20. DEPARTMENT OF CHEMICAL ENGINEERING DEPARTMENT OF MECHANICAL AND INDUSTRIAL ENGINEERING

    E-Print Network [OSTI]

    Mountziaris, T. J.

    DEPARTMENT OF CHEMICAL ENGINEERING DEPARTMENT OF MECHANICAL AND INDUSTRIAL ENGINEERING University review of kinetic processes in engineering materials that control the materials' structural and chemical in engineering materials that control the materials' structural and chemical characteristics in relation