National Library of Energy BETA

Sample records for reduce energy production

  1. Industrial Assessment Centers - Small Manufacturers Reduce Energy & Increase Productivity

    SciTech Connect (OSTI)

    2015-11-06

    Since 1976, the Industrial Assessment Centers (IACs), administered by the US Department of Energy, have supported small and medium-sized American manufacturers to reduce energy use and increase their productivity and competitiveness. The 24 IACs, located at premier engineering universities around the country (see below), send faculty and engineering students to local small and medium-sized manufacturers to provide no-cost assessments of energy use, process performance and waste and water flows. Under the direction of experienced professors, IAC engineering students analyze the manufacturer’s facilities, energy bills and energy, waste and water systems, including compressed air, motors/pumps, lighting, process heat and steam. The IACs then follow up with written energy-saving and productivity improvement recommendations, with estimates of related costs and payback periods.

  2. Steelmaker Matches Recovery Act Funds to Save Energy & Reduce Steel Production Costs

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Steelmaker Matches Recovery Act Funds to Save Energy & Reduce Steel Production Costs ArcelorMittal Indiana Harbor Energy Recovery & Reuse 504 Boiler constructed and installed with DOE Recovery Act Funding The Advanced Manufacturing Office (AMO) at the U.S. Department of Energy provided $31.6 million in American Recovery & Reinvestment Act (ARRA) funding to construct and install an energy-efficient boiler and upgrade ArcelorMittal Indiana Harbor steelmaking complex facilities. One of

  3. substantially reduced production costs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    production costs - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy ...

  4. Solid Fuel - Oxygen Fired Combustion for Production of Nodular Reduced Iron to Reduce CO2 Emissions and Improve Energy Efficiencies

    SciTech Connect (OSTI)

    Donald R. Fosnacht; Richard F. Kiesel; David W. Hendrickson; David J. Englund; Iwao Iwasaki; Rodney L. Bleifuss; Mathew A. Mlinar

    2011-12-22

    The current trend in the steel industry is an increase in iron and steel produced in electric arc furnaces (EAF) and a gradual decline in conventional steelmaking from taconite pellets in blast furnaces. In order to expand the opportunities for the existing iron ore mines beyond their blast furnace customer base, a new material is needed to satisfy the market demands of the emerging steel industry while utilizing the existing infrastructure and materials handling capabilities. This demand creates opportunity to convert iron ore or other iron bearing materials to Nodular Reduced Iron (NRI) in a recently designed Linear Hearth Furnace (LHF). NRI is a metallized iron product containing 98.5 to 96.0% iron and 2.5 to 4% C. It is essentially a scrap substitute with little impurity that can be utilized in a variety of steelmaking processes, especially the electric arc furnace. The objective of this project was to focus on reducing the greenhouse gas emissions (GHG) through reducing the energy intensity using specialized combustion systems, increasing production and the use of biomass derived carbon sources in this process. This research examined the use of a solid fuel-oxygen fired combustion system and compared the results from this system with both oxygen-fuel and air-fuel combustion systems. The solid pulverized fuels tested included various coals and a bio-coal produced from woody biomass in a specially constructed pilot scale torrefaction reactor at the Coleraine Minerals Research Laboratory (CMRL). In addition to combustion, the application of bio-coal was also tested as a means to produce a reducing atmosphere during key points in the fusion process, and as a reducing agent for ore conversion to metallic iron to capture the advantage of its inherent reduced carbon footprint. The results from this study indicate that the approaches taken can reduce both greenhouse gas emissions and the associated energy intensity with the Linear Hearth Furnace process for converting

  5. Steelmaker Matches Recovery Act Funds to Save Energy & Reduce Steel Production Costs

    Broader source: Energy.gov [DOE]

    ArcelorMittal Indiana Harbor Energy Recovery & Reuse 504 Boiler constructed and installed with DOE Recovery Act Funding

  6. NREL Demonstrates Light-Driven Process for Enzymatic Ammonia Production: Carbon emissions and energy requirements reduced with new approach

    Broader source: Energy.gov [DOE]

    A new process using light to reduce dinitrogen into ammonia, the main ingredient in chemical fertilizers could inspire development of new, more sustainable processes that eliminate the energy-intensive, lengthier processes now commonly in use. According to researchers at the Energy Department's National Renewable Energy Laboratory (NREL), photochemical (photon) energy can serve as a substitute for the adenosine 5'-triphosphate (ATP)-dependent electron transfer mechanism typically used in biology to drive nitrogenase to reduce dinitrogen (N2) to ammonia (NH3).

  7. Reducing Energy Loss

    K-12 Energy Lesson Plans and Activities Web site (EERE)

    Students will learn about the Law of Conservation of Energy. They will also compare and contrast Energy Guide Labels to study energy efficiency and conservation as well.

  8. Reducing carbon dioxide to products

    DOE Patents [OSTI]

    Cole, Emily Barton; Sivasankar, Narayanappa; Parajuli, Rishi; Keets, Kate A

    2014-09-30

    A method reducing carbon dioxide to one or more products may include steps (A) to (C). Step (A) may bubble said carbon dioxide into a solution of an electrolyte and a catalyst in a divided electrochemical cell. The divided electrochemical cell may include an anode in a first cell compartment and a cathode in a second cell compartment. The cathode may reduce said carbon dioxide into said products. Step (B) may adjust one or more of (a) a cathode material, (b) a surface morphology of said cathode, (c) said electrolyte, (d) a manner in which said carbon dioxide is bubbled, (e), a pH level of said solution, and (f) an electrical potential of said divided electrochemical cell, to vary at least one of (i) which of said products is produced and (ii) a faradaic yield of said products. Step (C) may separate said products from said solution.

  9. probabilistic energy production forecasts

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    energy production forecasts - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary ...

  10. Renewable Energy Can Help Reduce Oil Dependency

    ScienceCinema (OSTI)

    Arvizu, Dan

    2013-05-29

    In a speech to the Economic Club of Kansas City on June 23, 2010, NREL Director Dan Arvizu takes a realistic look at how renewable energy can help reduce America's dependence on oil, pointing out that the country gets as much energy from renewable sources now as it does from offshore oil production. For a transcript, visit http://www.nrel.gov/director/pdfs/energy_overview_06_10.pdf

  11. Renewable Energy Can Help Reduce Oil Dependency

    SciTech Connect (OSTI)

    Arvizu, Dan

    2010-01-01

    In a speech to the Economic Club of Kansas City on June 23, 2010, NREL Director Dan Arvizu takes a realistic look at how renewable energy can help reduce America's dependence on oil, pointing out that the country gets as much energy from renewable sources now as it does from offshore oil production. For a transcript, visit http://www.nrel.gov/director/pdfs/energy_overview_06_10.pdf

  12. Two-Stage, Integrated, Geothermal-CO2 Storage Reservoirs: An Approach for Sustainable Energy Production, CO2-Sequestration Security, and Reduced Environmental Risk

    SciTech Connect (OSTI)

    Buscheck, T A; Chen, M; Sun, Y; Hao, Y; Elliot, T R

    2012-02-02

    We introduce a hybrid two-stage energy-recovery approach to sequester CO{sub 2} and produce geothermal energy at low environmental risk and low cost by integrating geothermal production with CO{sub 2} capture and sequestration (CCS) in saline, sedimentary formations. Our approach combines the benefits of the approach proposed by Buscheck et al. (2011b), which uses brine as the working fluid, with those of the approach first suggested by Brown (2000) and analyzed by Pruess (2006), using CO{sub 2} as the working fluid, and then extended to saline-formation CCS by Randolph and Saar (2011a). During stage one of our hybrid approach, formation brine, which is extracted to provide pressure relief for CO{sub 2} injection, is the working fluid for energy recovery. Produced brine is applied to a consumptive beneficial use: feedstock for fresh water production through desalination, saline cooling water, or make-up water to be injected into a neighboring reservoir operation, such as in Enhanced Geothermal Systems (EGS), where there is often a shortage of a working fluid. For stage one, it is important to find economically feasible disposition options to reduce the volume of brine requiring reinjection in the integrated geothermal-CCS reservoir (Buscheck et al. 2012a). During stage two, which begins as CO{sub 2} reaches the production wells; coproduced brine and CO{sub 2} are the working fluids. We present preliminary reservoir engineering analyses of this approach, using a simple conceptual model of a homogeneous, permeable CO{sub 2} storage formation/geothermal reservoir, bounded by relatively impermeable sealing units. We assess both the CO{sub 2} sequestration capacity and geothermal energy production potential as a function of well spacing between CO{sub 2} injectors and brine/CO{sub 2} producers for various well patterns and for a range of subsurface conditions.

  13. Reducing Energy Demand in Buildings Through State Energy Codes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reducing Energy Demand in Buildings Through State Energy Codes Reducing Energy Demand in ... More Documents & Publications Technology Performance Exchange - 2013 BTO Peer Review ...

  14. Reducing Your Electricity Use | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reducing energy use in your home saves you money, increases our energy security, and reduces the pollution that is emitted from non-renewable sources of energy. If you are planning ...

  15. State Energy Production Estimates

    U.S. Energy Information Administration (EIA) Indexed Site

    Energy Production Estimates 1960 Through 2012 2012 Summary Tables Table P1. Energy Production Estimates in Physical Units, 2012 Alabama 19,455 215,710 9,525 0 Alaska 2,052 351,259...

  16. Energy Efficiency Product Standards

    Broader source: Energy.gov [DOE]

    New Jersey Energy Efficiency Product Standards, enacted in 2005, include minimum standards for eight products, which were preempted by the federal Energy Policy Act of 2005. Future standards, if...

  17. Reduced Call-Backs with High Performance Production Builders - Building

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    America Top Innovation | Department of Energy Reduced Call-Backs with High Performance Production Builders - Building America Top Innovation Reduced Call-Backs with High Performance Production Builders - Building America Top Innovation Photo of a home with a fence. Engaging production builders to build high-performance homes is key to successfully transforming the market. For this Top Innovation, Building America has effectively addressed this challenge by demonstrating the compelling

  18. Reducing Your Electricity Use | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electricity & Fuel Appliances & Electronics Reducing Your Electricity Use Reducing Your Electricity Use An energy audit can help you find the most effective ways to save...

  19. Department of Energy Request for Information: Reducing Regulatory Burden

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (Reply Comments) | Department of Energy Request for Information: Reducing Regulatory Burden (Reply Comments) Department of Energy Request for Information: Reducing Regulatory Burden (Reply Comments) Comments on RFI on reducing regulatory burden Department of Energy Request for Information: Reducing Regulatory Burden (Reply Comments) (89.49 KB) More Documents & Publications Re: Regulatory Burden RFI RegReview_ReplyComments_Lennox_Hearth_Products.PDF .Hearth, Patio & Barbecue

  20. Reduce Hot Water Use for Energy Savings | Department of Energy

    Energy Savers [EERE]

    Water Heating Reduce Hot Water Use for Energy Savings Reduce Hot Water Use for Energy Savings One easy energy lifehack: fix leaky faucets to save money and energy. One easy ...

  1. Biomass Energy Production Incentive

    Office of Energy Efficiency and Renewable Energy (EERE)

    In 2007 South Carolina enacted the Energy Freedom and Rural Development Act, which provides production incentives for certain biomass-energy facilities. Eligible systems earn $0.01 per kilowatt-h...

  2. Industrial Assessment Centers Small Manufacturers Reduce Energy & Increase

    Broader source: Energy.gov (indexed) [DOE]

    DOE/EE-1278 Industrial Assessment Centers Small Manufacturers Reduce Energy & Increase Productivity Since 1976, the Industrial Assessment Centers (IACs), administered by the US Department of Energy, have supported small and medium-sized American manufacturers to reduce energy use and increase their productivity and competitiveness. The 24 IACs, located at premier engineering universities around the country (see below), send faculty and engineering students to local small and medium-sized

  3. Fundamentals of energy production

    SciTech Connect (OSTI)

    Harder, E.L.

    1982-01-01

    The theory, methods of conversion, and costs of various energy sources, transformations, and production techniques are summarized. Specific attention is given to carbon-based fuels in liquid, gaseous, and solid forms and processes for producing synthetic fuels. Additional details are presented for hydrogen and biomass technologies, as well as nuclear fuel-based electricity production. Renewable energy methods are dealt with in terms of the potentials and current applications of tidal generating stations, hydroelectric installations, solar thermal and electrical energy production, and the development of large wind turbines. Consideration is given to the environmental effects of individual energy technologies, along with associated costs and transportability of the energy produced.

  4. Reduce Hot Water Use for Energy Savings | Department of Energy

    Energy Savers [EERE]

    Heat & Cool Water Heating Reduce Hot Water Use for Energy Savings Reduce Hot Water Use for Energy Savings One easy energy lifehack: fix leaky faucets to save money and ...

  5. Renewable Energy Products LLC | Open Energy Information

    Open Energy Info (EERE)

    Products, LLC Place: Santa Fe Springs, California Zip: 90670 Product: Own and operate a biodiesel production facility in California. References: Renewable Energy Products, LLC1...

  6. Accelerate Energy Productivity 2030 Launch

    Broader source: Energy.gov [DOE]

    Today, the Department of Energy kicked off Accelerate Energy Productivity 2030. This initiative supports President Obama’s goal to double our energy productivity by 2030.

  7. Reduce Hot Water Use for Energy Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Heat & Cool Water Heating Reduce Hot Water Use for Energy Savings Reduce Hot Water Use for ... Home Cooling Systems Home Heating Systems Heat Pump Systems Water Heating ...

  8. Iowa Community College Campuses Reduce Energy Use | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Iowa Community College Campuses Reduce Energy Use Iowa Community College Campuses Reduce Energy Use August 27, 2010 - 1:05pm Addthis DMACC will be installing nearly 1,500 occupancy sensors in the college's classrooms to help conserve energy.| Photo Courtesy of DMACC DMACC will be installing nearly 1,500 occupancy sensors in the college's classrooms to help conserve energy.| Photo Courtesy of DMACC Kevin Craft What are the key facts? Energy retrofit projects estimated to reduce annual energy use

  9. CONNECTICUT CHALLENGES TOWNS TO REDUCE ENERGY USE | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CONNECTICUT CHALLENGES TOWNS TO REDUCE ENERGY USE CONNECTICUT CHALLENGES TOWNS TO REDUCE ENERGY USE CONNECTICUT CHALLENGES TOWNS TO REDUCE ENERGY USE With both the household use and cost of electricity increasing and an abundance of older homes, Connecticut's market was ripe for residential energy efficiency upgrades. Through a two-year pilot program, the Connecticut Neighbor to Neighbor Energy Challenge (N2N) sought to improve the state's existing residential energy efficiency programs, with

  10. Reducing Energy Demand in Buildings Through State Energy Codes | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Reducing Energy Demand in Buildings Through State Energy Codes Reducing Energy Demand in Buildings Through State Energy Codes Building Codes Project for the 2013 Building Technologies Office's Program Peer Review bldgcodes03_guttman_040213.pdf (544.21 KB) More Documents & Publications Technology Performance Exchange - 2013 BTO Peer Review Atmospheric Pressure Deposition for Electrochromic Windows Building America System Research

  11. Positive Energy Conservation Products | Open Energy Information

    Open Energy Info (EERE)

    Area Sector: Efficiency Product: Distributor of energy efficiency products - lighting, heating, cooling, water Website: www.positive-energy.com Coordinates: 40.0153,...

  12. Energy Detectives Help Pennsylvania Town Reduce Costs

    Broader source: Energy.gov [DOE]

    Judith Mondre spent the past two months learning the ins and outs of Upper Darby Township, Pa.'s energy usage. She's analyzed energy bills, observed town facilities and interviewed staff to put together a plan to help the municipality reduce its total energy usage.

  13. ENERGY SIGNATURES ENERGY SIGNATURES Optimizing Production and...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SIGNATURES ENERGY SIGNATURES Optimizing Production and Mitigating Impacts Los Alamos National Laboratory's Science of Signatures 2 Advanced Science for Energy Signatures Energy in ...

  14. Accelerate Energy Productivity 2030 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and the Alliance to Save Energy, released Accelerate Energy Productivity 2030: A Strategic Roadmap for American Energy Innovation, Economic Growth, and Competitiveness (Roadmap). ...

  15. Reduced Call-Backs with High Performance Production Builders...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reduced Call-Backs with High Performance Production Builders - Building America Top Innovation Reduced Call-Backs with High Performance Production Builders - Building America Top ...

  16. Steelmaker Matches Recovery Act Funds to Save Energy & Reduce Steel

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Production Costs | Department of Energy Steelmaker Matches Recovery Act Funds to Save Energy & Reduce Steel Production Costs Steelmaker Matches Recovery Act Funds to Save Energy & Reduce Steel Production Costs March 17, 2014 - 2:24pm Addthis Steelmaker Matches Recovery Act Funds to Save Energy & Reduce Steel Production Costs One-page factsheet describing how ArcelorMittal Indiana Harbor Energy Recovery & Reuse 504 Boiler was constructed and installed with DOE Recovery Act

  17. State Energy Production Estimates

    Gasoline and Diesel Fuel Update (EIA)

    Production Estimates 1960 Through 2014 2014 Summary Tables U.S. Energy Information Administration | State Energy Data 2014: Production 1 Table P1. Energy Production Estimates in Physical Units, 2014 Alabama 16,377 181,054 9,828 0 Alaska 1,502 345,331 181,175 0 Arizona 8,051 106 56 1,044 Arkansas 94 1,123,678 6,845 0 California 0 252,718 204,269 4,462 Colorado 24,007 1,631,391 95,192 3,133 Connecticut 0 0 0 0 Delaware 0 0 0 0 District of Columbia 0 0 0 0 Florida 0 369 2,227 0 Georgia 0 0 0 2,517

  18. Reducing Your Electricity Use | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    If you are planning to install a small renewable energy system to make your own electricity, such as a solar electric system or small wind turbine, reducing your electricity...

  19. Reducing Photovoltaic Costs | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Photovoltaics » Reducing Photovoltaic Costs Reducing Photovoltaic Costs Photo of gloved hands pouring liquid from a glass bottle to glass beaker. The development of more efficient, affordable photovoltaics (PV) and concentrating solar power (CSP) technologies are crucial to the U.S. Department of Energy (DOE) SunShot Initiative, and making solar cost-competitive with other sources of energy. DOE is fueling innovative solar technology solutions with focused project funding and partnerships with

  20. National Renewable Energy Laboratory To Reduce Staff

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    To Reduce Staff Last updated: November 14, 1995 For information contact: Robert Noun, (303) 275-3062 Kerry Masson (303) 275-4083 Golden, Colo., November 3, 1995 -- The U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) announced today a schedule for restructuring and reducing its work force in response to impending reductions in federal research budgets. Work force reductions may ultimately eliminate more than 10 percent of the present work force of about 900 full-time

  1. Sunforce Products | Open Energy Information

    Open Energy Info (EERE)

    energy Product: Manufacturer and distributor of solar and wind power generation and battery charging products. References: Sunforce Products1 This article is a stub. You can...

  2. Reduce Radiation Losses from Heating Equipment | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Radiation Losses from Heating Equipment Reduce Radiation Losses from Heating Equipment This tip sheet describes how to save process heating energy and costs by reducing expensive heat losses from industrial heating equipment, such as furnaces. PROCESS HEATING TIP SHEET #7 Reduce Radiation Losses from Heating Equipment (January 2006) (277.28 KB) More Documents & Publications Waste Heat Reduction and Recovery for Improving Furnace Efficiency, Productivity and Emissions Performance: A

  3. Mobile Energy Products Inc | Open Energy Information

    Open Energy Info (EERE)

    Name: Mobile Energy Products Inc Place: Colorado Springs, Colorado Sector: Hydro, Hydrogen Product: Manufacturing subsidiary, which produces nickel sintered plaque for...

  4. 2009 Total Energy Production by State | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Total Energy Production by State 2009 Total Energy Production by State 2009 Total Energy Production by State...

  5. Helping Alaska Native Communities Reduce Their Energy Costs | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Alaska Native Communities Reduce Their Energy Costs Helping Alaska Native Communities Reduce Their Energy Costs May 3, 2013 - 12:50pm Addthis The Energy Department is helping Alaska Native communities reduce their energy costs by investing in renewable energy and energy efficiency upgrades. | Photo courtesy of Western Community Energy. The Energy Department is helping Alaska Native communities reduce their energy costs by investing in renewable energy and energy efficiency upgrades. |

  6. Covered Product Category: Imaging Equipment | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    ... REDUCING ENERGY COSTS: SAVE MORE THAN 20 WHEN YOU BUY ENERGY STAR QUALIFIED PRODUCTS FEMP ... FEMP recommends that agencies incorporate efficiency requirements into both the technical ...

  7. Construction of energy-stable Galerkin reduced order models.

    SciTech Connect (OSTI)

    Kalashnikova, Irina; Barone, Matthew Franklin; Arunajatesan, Srinivasan; van Bloemen Waanders, Bart Gustaaf

    2013-05-01

    This report aims to unify several approaches for building stable projection-based reduced order models (ROMs). Attention is focused on linear time-invariant (LTI) systems. The model reduction procedure consists of two steps: the computation of a reduced basis, and the projection of the governing partial differential equations (PDEs) onto this reduced basis. Two kinds of reduced bases are considered: the proper orthogonal decomposition (POD) basis and the balanced truncation basis. The projection step of the model reduction can be done in two ways: via continuous projection or via discrete projection. First, an approach for building energy-stable Galerkin ROMs for linear hyperbolic or incompletely parabolic systems of PDEs using continuous projection is proposed. The idea is to apply to the set of PDEs a transformation induced by the Lyapunov function for the system, and to build the ROM in the transformed variables. The resulting ROM will be energy-stable for any choice of reduced basis. It is shown that, for many PDE systems, the desired transformation is induced by a special weighted L2 inner product, termed the %E2%80%9Csymmetry inner product%E2%80%9D. Attention is then turned to building energy-stable ROMs via discrete projection. A discrete counterpart of the continuous symmetry inner product, a weighted L2 inner product termed the %E2%80%9CLyapunov inner product%E2%80%9D, is derived. The weighting matrix that defines the Lyapunov inner product can be computed in a black-box fashion for a stable LTI system arising from the discretization of a system of PDEs in space. It is shown that a ROM constructed via discrete projection using the Lyapunov inner product will be energy-stable for any choice of reduced basis. Connections between the Lyapunov inner product and the inner product induced by the balanced truncation algorithm are made. Comparisons are also made between the symmetry inner product and the Lyapunov inner product. The performance of ROMs constructed

  8. Reducing Waste and Saving Energy with Composting | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    of Energy Residential Network Peer Exchange Call Series: On Bill Financing: Reducing Cost Barriers to Energy Efficiency Improvements (201), call slides and discussion summary. Call Slides and Discussion Summary (2.13 MB) More Documents & Publications Lessons from On-Bill Financing and Repayment Programs On-Bill Financing for Energy Efficiency Improvements Toolkit CBEI: Demonstrating On-Bill Financing to Encourage Deep Retrofits - 2015 Peer Review

    ersed e Energy Efficiency &

  9. Energy Production | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Field Trip to an Energy Source (optional) Chocolate Chip Cookie Mining Lab Curriculum Language Arts, Science, Technology Plan Time 60+ minutes Materials Handouts and other...

  10. Reducing Energy Costs and Rebuilding the Past | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reducing Energy Costs and Rebuilding the Past Reducing Energy Costs and Rebuilding the Past June 7, 2012 - 2:48pm Addthis Franklin County Courthouse (Before) 1 of 2 Franklin County Courthouse (Before) A court employee and news photographer survey the bomb damage in the Franklin County Courthouse's main courtroom in November 1969. Image: Courtesy of the Washington Missourian. Franklin County Courthouse (After) 2 of 2 Franklin County Courthouse (After) The fully restored main courtroom includes

  11. On-Bill Financing: Reducing Cost Barriers to Energy Efficiency...

    Office of Environmental Management (EM)

    On-Bill Financing: Reducing Cost Barriers to Energy Efficiency Improvements (201) On-Bill Financing: Reducing Cost Barriers to Energy Efficiency Improvements (201) October 8...

  12. Metal and Glass Manufacturers Reduce Costs by Increasing Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Metal and Glass Manufacturers Reduce Costs by Increasing Energy Efficiency in Process Heating Systems Metal and Glass Manufacturers Reduce Costs by Increasing Energy Efficiency in...

  13. DOE Announces Webinars on Reducing Energy Use in Buildings, Integratin...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reducing Energy Use in Buildings, Integrating Bioenergy into the Classroom, and More DOE Announces Webinars on Reducing Energy Use in Buildings, Integrating Bioenergy into the ...

  14. IRS Parking Facility Lighting Retrofit Reduces Annual Energy...

    Office of Environmental Management (EM)

    IRS Parking Facility Lighting Retrofit Reduces Annual Energy Use by 76% IRS Parking Facility Lighting Retrofit Reduces Annual Energy Use by 76% IRS Parking Facility Lighting ...

  15. Next-Generation Power Electronics: Reducing Energy Waste and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Next-Generation Power Electronics: Reducing Energy Waste and Powering the Future Next-Generation Power Electronics: Reducing Energy Waste and Powering the Future January 15, 2014 - ...

  16. Reducing Cost Barriers to Energy Efficiency Improvements (201...

    Energy Savers [EERE]

    Reducing Cost Barriers to Energy Efficiency Improvements (201) Reducing Cost Barriers to Energy Efficiency Improvements (201) Better Buildings Residential Network Peer Exchange ...

  17. Project Profile: Reducing the Cost of Thermal Energy Storage...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Concentrating Solar Power Project Profile: Reducing the Cost of Thermal Energy Storage for ... is looking at innovative ways to reduce thermal energy storage (TES) system costs. ...

  18. EERE Success Story-New York: Weatherizing Westbeth Reduces Energy...

    Energy Savers [EERE]

    York: Weatherizing Westbeth Reduces Energy Consumption EERE Success Story-New York: Weatherizing Westbeth Reduces Energy Consumption August 21, 2013 - 12:00am Addthis The New York ...

  19. Reducing Regulatory Burden | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Request for information on reducing regulatory burden Reducing Regulatory Burden (177.64 KB) More Documents & Publications Reducing Regulatory Burden Reducing Regulatory Burden

  20. Production | Department of Energy

    Energy Savers [EERE]

    Research & Development Algal Biofuels Production Production PNNL image Algae ... growth rate and high oil content, that make algae attractive to convert into biofuels. ...

  1. Reducing Regulatory Burden | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Burden Reducing Regulatory Burden Request for information on reducing regulatory burden Reducing Regulatory Burden (289.74 KB) More Documents & Publications Reducing Regulatory Burden; Retrospective Review Under E.O. 13563 SEVENTH RFI COMMENTS ON REDUCING REGULATORY BURDEN

  2. Electricity production using solar energy

    SciTech Connect (OSTI)

    Demirbas, M.F.

    2007-07-01

    In this study, a solar-powered development project is used to identify whether it is possible to utilize solar technologies in the electricity production sector. Electricity production from solar energy has been found to be a promising method in the future. Concentrated solar energy can be converted to chemical energy via high-temperature endothermic reactions. Coal and biomass can be pyrolyzed or gasified by using concentrated solar radiation for generating power. Conventional energy will not be enough to meet the continuously increasing need for energy in the future. In this case, renewable energy sources will become important. Solar energy is an increasing need for energy in the future. Solar energy is a very important energy source because of its advantages. Instead of a compressor system, which uses electricity, an absorption cooling system, using renewable energy and kinds of waste heat energy, may be used for cooling.

  3. Reduce Waste and Save Energy this Holiday Season | Department...

    Office of Environmental Management (EM)

    Reduce Waste and Save Energy this Holiday Season Reduce Waste and Save Energy this Holiday Season December 5, 2014 - 9:55am Addthis Wrap your gifts with recycled paper to reduce ...

  4. Renewable Energy Production By State | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Renewable Energy Production By State Renewable Energy Production By State Renewable Energy Production By State Click on a state for more information...

  5. Energy Department Announces $7 Million to Reduce Non-Hardware...

    Office of Environmental Management (EM)

    Million to Reduce Non-Hardware Costs of Solar Energy Systems Energy Department Announces 7 Million to Reduce Non-Hardware Costs of Solar Energy Systems November 15, 2011 - 4:52pm ...

  6. Energy Recovery Linacs for Commercial Radioisotope Production

    SciTech Connect (OSTI)

    Sy, Amy; Krafft, Geoffrey A.; Johnson, Rolland; Roberts, Tom; Boulware, Chase; Hollister, Jerry

    2015-09-01

    Photonuclear reactions with bremsstrahlung photon beams from electron linacs can generate radioisotopes of critical interest. An SRF Energy Recovery Linac (ERL) provides a path to a more diverse and reliable domestic supply of short-lived, high-value, high-demand isotopes in a more compact footprint and at a lower cost than those produced by conventional reactor or ion accelerator methods. Use of an ERL enables increased energy efficiency of the complex through energy recovery of the waste electron beam, high electron currents for high production yields, and reduced neutron production and shielding activation at beam dump components. Simulation studies using G4Beamline/GEANT4 and MCNP6 through MuSim, as well as other simulation codes, will design an ERL-based isotope production facility utilizing bremsstrahlung photon beams from an electron linac. Balancing the isotope production parameters versus energy recovery requirements will inform a choice of isotope production target for future experiments.

  7. Annual Energy Outlook 2014 projects reduced need for U.S. oil...

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Annual Energy Outlook 2014 projects reduced need for U.S. oil imports due to tight oil production growth U.S. production of tight crude oil is expected to make up a larger share ...

  8. Hydrogen Production | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Production Hydrogen Production Hydrogen Production Hydrogen is the simplest element on earth-it consists of only one proton and one electron-and it is an energy carrier, not an energy source. Hydrogen can store and deliver usable energy, but it doesn't typically exist by itself in nature and must be produced from compounds that contain it. WHY STUDY HYDROGEN PRODUCTION Hydrogen can be used in fuel cells to generate power using a chemical reaction rather than combustion, producing only water and

  9. Pathway of Fermentative Hydrogen Production by Sulfate-reducing Bacteria

    SciTech Connect (OSTI)

    Wall, Judy D.

    2015-02-16

    Biofuels are a promising source of sustainable energy. Such biofuels are intermediate products of microbial metabolism of renewable substrates, in particular, plant biomass. Not only are alcohols and solvents produced in this degradative process but energy-rich hydrogen as well. Non photosynthetic microbial hydrogen generation from compounds other than sugars has not been fully explored. We propose to examine the capacity of the abundant soil anaerobes, sulfate-reducing bacteria, for hydrogen generation from organic acids. These apparently simple pathways have yet to be clearly established. Information obtained may facilitate the exploitation of other microbes not yet readily examined by molecular tools. Identification of the flexibility of the metabolic processes to channel reductant to hydrogen will be useful in consideration of practical applications. Because the tools for genetic and molecular manipulation of sulfate-reducing bacteria of the genus Desulfovibrio are developed, our efforts will focus on two strains, D. vulgaris Hildenborough and Desulfovibrio G20.Therefore total metabolism, flux through the pathways, and regulation are likely to be limiting factors which we can elucidate in the following experiments.

  10. Department of Energy Request for Information: Reducing Regulatory...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Request for Information: Reducing Regulatory Burden (Reply Comments) Department of Energy Request for Information: Reducing Regulatory Burden (Reply Comments) Comments on RFI on ...

  11. Reduced

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Reduce Waste and Save Energy this Holiday Season Reduce Waste and Save Energy this Holiday Season December 5, 2014 - 9:55am Addthis Wrap your gifts with recycled paper to reduce waste and save money. | Photo courtesy of istockphoto/diane555 Wrap your gifts with recycled paper to reduce waste and save money. | Photo courtesy of istockphoto/diane555 Paige Terlip Paige Terlip Former Communicator, National Renewable Energy Laboratory What are the key facts? Reduce waste and save energy this holiday

  12. ENERGY STAR Product Rebates

    Broader source: Energy.gov [DOE]

    When mail-in rebates are active, as a general rule, all appliances must be ENERGY STAR rated; however, additional requirements may apply to different types of appliances. Rebate requests must...

  13. How Do You Reduce Energy Use from Computers and Electronics?...

    Broader source: Energy.gov (indexed) [DOE]

    discussed some ways to reduce the energy used by computers and electronics. Some tips include ensuring your computer is configured for optimal energy savings, turning off devices...

  14. New York: Weatherizing Westbeth Reduces Energy Consumption

    Broader source: Energy.gov [DOE]

    Project provides energy savings and the improved health and safety of the residents within the building.

  15. Construction of energy-stable projection-based reduced order...

    Office of Scientific and Technical Information (OSTI)

    Construction of energy-stable projection-based reduced order models Prev Next Title: Construction of energy-stable projection-based reduced order models Our paper aims to ...

  16. Reduce Risk, Increase Clean Energy: How States and Cities are...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reduce Risk, Increase Clean Energy: How States and Cities are Using Old Finance Tools to Scale Up a New Industry Reduce Risk, Increase Clean Energy: How States and Cities are Using ...

  17. New Water Booster Pump System Reduces Energy Consumption by 80...

    Broader source: Energy.gov (indexed) [DOE]

    As a result, the company reduced pumping system energy consumption by 80 percent (225,100 ... New Water Booster Pump System Reduces Energy Consumption by 80 Percent and Increases ...

  18. Reducing Cost Barriers to Energy Efficiency Improvements (201)

    Office of Energy Efficiency and Renewable Energy (EERE)

    Better Buildings Residential Network Peer Exchange Call Series: On Bill Financing: Reducing Cost Barriers to Energy Efficiency Improvements (201)

  19. Energy- and Water-Efficient Products | Department of Energy

    Office of Environmental Management (EM)

    and Water-Efficient Products Energy- and Water-Efficient Products The Federal Energy Management Program (FEMP) provides resources and tools to help agencies purchase energy- and ...

  20. Using Wireless Technology to Reduce Facility Energy Usage | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Using Wireless Technology to Reduce Facility Energy Usage Using Wireless Technology to Reduce Facility Energy Usage This presentation details the U.S. Department of Energy's TEAM initiative's wireless technologies and their applications. Using Wireless Technology to Reduce Facility Energy Usage (December 4, 2009) (2.57 MB) More Documents & Publications New and Emerging Technologies Figure 1: Chamber experiment to study impact of air movement on thermal comfort using personally

  1. Reduce NOx and Improve Energy Efficiency

    SciTech Connect (OSTI)

    2005-05-01

    The U.S. Department of Energy's NOx and Energy Assessment Tool (NxEAT) is available at no charge to help the petroleum refining and chemicals industries develop a cost-effective, plant-wide strategy for NOx reduction and energy efficiency improvements.

  2. Malczewski Product Design LLC | Open Energy Information

    Open Energy Info (EERE)

    Malczewski Product Design LLC Jump to: navigation, search Name: Malczewski Product Design LLC Place: Neenah, Wisconsin Zip: 54956 Sector: Wind energy Product: Product development...

  3. Energy Production Over the Years | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Production Over the Years Energy Production Over the Years US Energy Production Through the Years Click on each state to learn more about how much energy it produces Pick an energy source Total Energy Produced Coal Crude Oil Natural Gas Total Renewable Energy Non-Biofuel Renewable Energy Biofuels Nuclear Power Source: EIA State Energy Data Systems

  4. Reducing Waste and Harvesting Energy This Halloween

    Office of Energy Efficiency and Renewable Energy (EERE)

    This Halloween, think of turning seasonal waste -- including pumpkins, hay and leaves -- to energy as a very important “trick” that can have a positive environmental impact.

  5. GovEnergy 2011 Offers Federal Energy Professionals Strategies for Reducing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Use | Department of Energy GovEnergy 2011 Offers Federal Energy Professionals Strategies for Reducing Energy Use GovEnergy 2011 Offers Federal Energy Professionals Strategies for Reducing Energy Use September 13, 2011 - 11:08am Addthis Timothy Unruh, Program Manager for the Office of Energy Efficiency and Renewable Energy Image: Energy Department Image | Photo By Mark Bealer (Contractor) Timothy Unruh, Program Manager for the Office of Energy Efficiency and Renewable Energy Image:

  6. New York: Weatherizing Westbeth Reduces Energy Consumption |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... 517.8 Million in Weatherization Funding and Energy Efficiency Grants for New York One Sky Homes, San Jose, CA, Custom Builder, Grand Award Winner. | California prides itself on ...

  7. Water Efficient Energy Production for Geothermal Resources |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Water Efficient Energy Production for Geothermal Resources Water Efficient Energy Production for Geothermal Resources PDF icon Primer FINAL.PDF More Documents & Publications Water ...

  8. Energy Recovery Linacs for Commercial Radioisotope Production...

    Office of Scientific and Technical Information (OSTI)

    Energy Recovery Linacs for Commercial Radioisotope Production Citation Details In-Document Search Title: Energy Recovery Linacs for Commercial Radioisotope Production Photonuclear ...

  9. Water Efficient Energy Production for Geothermal Resources |...

    Broader source: Energy.gov (indexed) [DOE]

    Water Efficient Energy Production for Geothermal Resources.PDF (4.19 MB) More Documents & Publications Water Efficient Energy Production for Geothermal Resources Water Use in the ...

  10. Energy Department Announces Up to $25 Million to Reduce Costs...

    Office of Environmental Management (EM)

    Up to 25 Million to Reduce Costs of Algal Biofuels Energy Department Announces Up to 25 Million to Reduce Costs of Algal Biofuels September 30, 2014 - 10:15am Addthis In support ...

  11. Wave energy and intertidal productivity

    SciTech Connect (OSTI)

    Leigh, E.G. Jr.; Paine, R.T.; Quinn, J.F.; Suchanek, T.H.

    1987-03-01

    In the northern Pacific, intertidal zones of the most wave-beaten shores receive more energy from breaking waves than from the sun. Despite severe mortality from winter storms, communities at some wave-beaten sites produce an extraordinary quantity of dry matter per unit area of shore per year. At wave-beaten sites of Tatoosh Island, WA, sea palms, Postelsia palmaeformis, can produce > 10 kg of dry matter, or 1.5 x 10/sup 8/ J, per m/sup 2/ in a good year. Extraordinarily productive organisms such as Postelsia are restricted to wave-beaten sites. Intertidal organisms cannot transform wave energy into chemical energy, as photosynthetic plants transform solar energy, nor can intertidal organisms harness wave energy. Nonetheless, wave energy enhances the productivity of intertidal organisms. On exposed shores, waves increase the capacity of resident algae to acquire nutrients and use sunlight, augment the competitive ability of productive organism, and protect intertidal residents by knocking away their enemies or preventing them from feeding.

  12. Waste-to-Energy: Waste Management and Energy Production Opportunities...

    Office of Environmental Management (EM)

    Waste-to-Energy: Waste Management and Energy Production Opportunities Waste-to-Energy: Waste Management and Energy Production Opportunities July 24, 2014 9:00AM to 3:30PM EDT U.S. ...

  13. Energy Report: U.S. Wind Energy Production and Manufacturing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Report: U.S. Wind Energy Production and Manufacturing Surges, Supporting Jobs and Diversifying U.S. Energy Economy Energy Report: U.S. Wind Energy Production and Manufacturing ...

  14. Advanced Energy Products Corp AEP | Open Energy Information

    Open Energy Info (EERE)

    Corp. (AEP) Place: Davis, California Zip: 95619 Product: Created to commercialise energy saving products developed by Davis Energy Group. Coordinates: 39.12868, -79.465714...

  15. New Water Booster Pump System Reduces Energy Consumption by 80...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BENEFITS A Motor Challeng NEW WATER BOOSTER PUMP SYSTEM REDUCES ENERGY CONSUMPTION BY 80 ... General Motors (GM) needed to relocate the facility's city water booster pumping system. ...

  16. Reducing Electricity Use and Costs | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    An energy audit can help you find the most effective ways to save money and reduce energy ... loads is the first step-saving you money by allowing you to purchase a smaller system. ...

  17. Building Technologies Office: R&D Opportunities to Reduce Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office: R&D Opportunities to Reduce Energy Consumption in Miscellaneous Electric Loads ... Why Do We Care About MELs? Problem: Fraction of energy consumption due to MELs is rising ...

  18. Isherwood Production Ltd | Open Energy Information

    Open Energy Info (EERE)

    Isherwood Production Ltd Jump to: navigation, search Name: Isherwood Production Ltd Place: London, England, United Kingdom Zip: SW7 2HP Product: Owners of the Energy Business...

  19. NREL: Technology Deployment - Renewable Energy Project Helps Tribe Reduce

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Carbon Footprint by 20,000 Tons Renewable Energy Project Helps Tribe Reduce Carbon Footprint by 20,000 Tons News DOE Supports Renewable Energy Deployment Projects for Forest County Potawatomi Community Publications Advancing Energy Development in Indian Country Renewable Energy Development in Indian Country: A Handbook for Tribes Sponsors U.S. DOE Office of Energy Efficiency & Renewable Energy Key Partners Forest County Potawatomi Tribe Contact Sarah Booth, 303-275-4383 A photo of a

  20. Energy and Cost Savings Calculators for Energy-Efficient Products...

    Open Energy Info (EERE)

    Energy and Cost Savings Calculators for Energy-Efficient Products Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Energy and Cost Savings Calculators for...

  1. Energy Efficient Equipment Product Model Listings | Open Energy...

    Open Energy Info (EERE)

    energy efficiency of different equipment and appliance models. Products are identified as ENERGY STAR qualified andor regulated in Canada under the Energy Efficiency Regulations....

  2. Enforcing elemental mass and energy balances for reduced order models

    SciTech Connect (OSTI)

    Ma, J.; Agarwal, K.; Sharma, P.; Lang, Y.; Zitney, S.; Gorton, I.; Agawal, D.; Miller, D.

    2012-01-01

    Development of economically feasible gasification and carbon capture, utilization and storage (CCUS) technologies requires a variety of software tools to optimize the designs of not only the key devices involved (e., g., gasifier, CO{sub 2} adsorber) but also the entire power generation system. High-fidelity models such as Computational Fluid Dynamics (CFD) models are capable of accurately simulating the detailed flow dynamics, heat transfer, and chemistry inside the key devices. However, the integration of CFD models within steady-state process simulators, and subsequent optimization of the integrated system, still presents significant challenges due to the scale differences in both time and length, as well the high computational cost. A reduced order model (ROM) generated from a high-fidelity model can serve as a bridge between the models of different scales. While high-fidelity models are built upon the principles of mass, momentum, and energy conservations, ROMs are usually developed based on regression-type equations and hence their predictions may violate the mass and energy conservation laws. A high-fidelity model may also have the mass and energy balance problem if it is not tightly converged. Conservations of mass and energy are important when a ROM is integrated to a flowsheet for the process simulation of the entire chemical or power generation system, especially when recycle streams are connected to the modeled device. As a part of the Carbon Capture Simulation Initiative (CCSI) project supported by the U.S. Department of Energy, we developed a software framework for generating ROMs from CFD simulations and integrating them with Process Modeling Environments (PMEs) for system-wide optimization. This paper presents a method to correct the results of a high-fidelity model or a ROM such that the elemental mass and energy are conserved perfectly. Correction factors for the flow rates of individual species in the product streams are solved using a

  3. Product Information Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Product Information Form Product Information Form When planning to present a new product to the EERE Product Governance Team, complete this product information form and email it to ee.communications@ee.doe.gov. Product Information Form (52.52 KB) More Documents & Publications Identity Guidelines for the Office of Energy Efficiency and Renewable Energy Apply for Technical Assistance EERE Successes Submission Template

  4. EERE Success Story-New York: Weatherizing Westbeth Reduces Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Consumption | Department of Energy York: Weatherizing Westbeth Reduces Energy Consumption EERE Success Story-New York: Weatherizing Westbeth Reduces Energy Consumption August 21, 2013 - 12:00am Addthis The New York State Homes and Community Renewal (HCR) initiated a weatherization project on a Westbeth Artists Housing complex-home to almost 400 low- and middle-income artists from a variety of artistic disciplines-in New York City's West Village. The Westbeth complex is on the National

  5. Reduce Air Infiltration in Furnaces | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Air Infiltration in Furnaces Reduce Air Infiltration in Furnaces This tip sheet describes how to save process heating energy and costs by reducing air infiltration in industrial furnaces; tips include repairing leaks and increasing insulation. PROCESS HEATING TIP SHEET #5 Reduce Air Infiltration in Furnaces (January 2006) (237.12 KB) More Documents & Publications Furnace Pressure Controllers Reduce Radiation Losses from Heating Equipment Load Preheating Using Flue Gases from a Fuel-Fired

  6. Comments on reducing regulatory burden | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    reducing regulatory burden Comments on reducing regulatory burden Comments on reducing regulatory burden from Ingersoll Rand, Residential Solutions, manufacturer of Trane and American Standard residential air conditioners, heat pumps, furnaces, and accessories Comments on reducing regulatory burden (115.32 KB) More Documents & Publications Regulatory Burden RFI [76 FR 75798] Notice of Availability of Preliminary Plan for Retrospective Analysis of Existing Rules 2014-09-18 Issuance: Energy

  7. Reducing Energy Demand in Buildings Through State Energy Codes

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building Technologies Office eere.energy.gov Distinctive Characteristics * BCAP is the catalyst for developing state-based, long- term solutions: - Convene state experts; train ...

  8. Colorado: Energy Modeling Products Support Energy Efficiency...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Assistance (EDA) program. Through EDA, Xcel provides energy consulting services to construction projects to encourage efficient energy use. Xcel's new tool, the Energy Design...

  9. Energy Lab Reduces Impact on Environment - News Releases | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Lab Reduces Impact on Environment April 18, 2003 Golden, CO. - Employees at the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) are "walking the talk" by reducing their impact on the environment at work through the Laboratory's "Sustainable NREL" program. "Our mission has always focused on a sustainable energy future for our nation and the world," said Bob Westby, leader of the Sustainable NREL program. "Sustainability at NREL, in

  10. Low Standby Power Products | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Low Standby Power Products The Federal Energy Management Program (FEMP) develops ... FEMP provides resources to help agencies find low standby power products and meet ...

  11. Ashworths Products Ltd | Open Energy Information

    Open Energy Info (EERE)

    England, United Kingdom Product: Lancashire-based producer of biodiesel from waste animal and vegetable fats, most of which is used for energy production through co-firing....

  12. Purified silicon production system - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Transmission Energy Analysis Energy Storage Geothermal Hydrogen and Fuel Cell ... Return to Search Purified silicon production system United States Patent Patent ...

  13. New Water Booster Pump System Reduces Energy Consumption by 80...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    This case study outlines how General Motors (GM) developed a highly efficient pumping ... As a result, the company reduced pumping system energy consumption by 80 percent (225,100 ...

  14. Central vacuum system with programmable controller reduces energy costs 40%

    SciTech Connect (OSTI)

    De Silva, R.; Varnes, W.; Gaines, A.

    1985-11-01

    The B.F. Goodrich Company needed a more efficient vacuum source for the pilot plant facilities in Avon Lake, OH where new products and manufacturing procedures are developed and evaluated. Fourteen multi-stage steam jet ejector vacuum systems were installed in one building, since a number of vacuum users could be operating concurrently at different levels in the range of 15 to 150 Torr. Ejectors were normally turned on or off to provide the desired vacuum and to conserve steam. Steam is wasted, however, if all stages are on and the amount of vacuum is regulated by bleeding inert gas into the system. Water can also enter the system by kick back, if steam to the ejectors is abruptly shut off. The jet ejector vacuum systems required a steady supply of high pressure steam day and night, but fluctuating demands could create problems in the quality of vacuum obtained. Steam and maintenance costs were also significant. Goodrich decided to replace most of the steam-operated vacuum units because of the high energy requirements, and concurrently reduce hydrocarbon emissions. A major manufacturer or mechanical vacuum equipment was asked to design a vacuum system that could provide steady vacuum in the range of 10 to 250 Torr. The system had to have sufficient capacity for a number of concurrently operating processes, and handle a wide variety of hydrocarbons. The system, designed to meet these requirements and installed in June 1984, consists of a Roots-type vacuum booster with bypass valves, discharging into an intercondenser. The progammable-controlled vacuum system has reduced energy requirements by approximately 40%, and has helped in minimizing emissions. The projected pay-back for the entire system is 1 1/2 years.

  15. Product Efficiency Cases | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Program for Consumer Products: Energy Conservation Standards for Refrigerators, Refrigerator-Freezers and Freezers (Refrigerator Efficiency Standards). In its exception...

  16. Superior Energy Performance: Certifying Increased Energy Productivity...

    Broader source: Energy.gov (indexed) [DOE]

    5 Energy & cost savings over time Elevates and integrates energy into normal business systems, as has happened for safety & quality Involves staff from the board...

  17. Communications Product Governance Team | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Product Governance Team Communications Product Governance Team The Office of Energy Efficiency and Renewable Energy (EERE) Product Governance Team (PGT) reviews and approves the publications, exhibits, logos, and templates for all EERE communications products. The PGT manages the product review process. Team Members The PGT includes the following members: Two to three EERE Communications Office Team members with varied communications expertise (e.g. product design and content review) One EERE

  18. Air Products Hydrogen Energy Systems | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Air Products Hydrogen Energy Systems Air Products Hydrogen Energy Systems Hydrogen Infrastructure Air Products Hydrogen Energy Systems (423.04 KB) More Documents & Publications QTR Ex Parte Communications H2A Hydrogen Delivery Infrastructure Analysis Models and Conventional Pathway Options Analysis Results - Interim Report Hydrogen Fuel for Material Handling

  19. Production of Energy Efficient Preform Structures (PEEPS)

    SciTech Connect (OSTI)

    Dr. John A. Baumann

    2012-06-08

    Due to its low density, good structural characteristics, excellent fabrication properties, and attractive appearance, aluminum metal and its alloys continue to be widely utilized. The transportation industry continues to be the largest consumer of aluminum products, with aerospace as the principal driver for this use. Boeing has long been the largest single company consumer of heat-treated aluminum in the U.S. The extensive use of aluminum to build aircraft and launch vehicles has been sustained, despite the growing reliance on more structurally efficient carbon fiber reinforced composite materials. The trend in the aerospace industry over the past several decades has been to rely extensively on large, complex, thin-walled, monolithic machined structural components, which are fabricated from heavy billets and thick plate using high speed machining. The use of these high buy-to-fly ratio starting product forms, while currently cost effective, is energy inefficient, with a high environmental impact. The widespread implementation of Solid State Joining (SSJ) technologies, to produce lower buy-to-fly ratio starting forms, tailored to each specific application, offers the potential for a more sustainable manufacturing strategy, which would consume less energy, require less material, and reduce material and manufacturing costs. One objective of this project was to project the energy benefits of using SSJ techniques to produce high-performance aluminum structures if implemented in the production of the world fleet of commercial aircraft. A further objective was to produce an energy consumption prediction model, capable of calculating the total energy consumption, solid waste burden, acidification potential, and CO2 burden in producing a starting product form - whether by conventional or SSJ processes - and machining that to a final part configuration. The model needed to be capable of computing and comparing, on an individual part/geometry basis, multiple possible

  20. Waste-to-Energy: Waste Management and Energy Production Opportunities |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Waste-to-Energy: Waste Management and Energy Production Opportunities Waste-to-Energy: Waste Management and Energy Production Opportunities July 24, 2014 9:00AM to 3:30PM EDT U.S. Department of Energy Washington, D.C. The tenth in a series of planned U.S. Department of Energy (DOE) Office of Indian Energy-sponsored strategic energy development forums, this Tribal Leader Forum focused on waste-to-energy technology and project opportunities for Indian Tribes. The forum

  1. Waste-to-Energy: Waste Management and Energy Production Opportunities...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Waste-to-Energy: Waste Management and Energy Production Opportunities July 24, 2014 9:00AM to 3:30PM EDT U.S. Department of Energy Washington, D.C. The tenth in a series of planned ...

  2. Covered Product Category: Displays | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Displays Covered Product Category: Displays The Federal Energy Management Program (FEMP) provides acquisition guidance for displays, a product category covered by the ENERGY STAR program. Federal laws and requirements mandate that agencies buy ENERGY STAR qualified products in all product categories covered by this program and any acquisition actions that are not specifically exempted by law. MEETING EFFICIENCY REQUIREMENTS FOR FEDERAL PURCHASES The U.S. Environmental Protection Agency (EPA)

  3. Electrolytic Hydrogen Production Workshop | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electrolytic Hydrogen Production Workshop Electrolytic Hydrogen Production Workshop The U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) Fuel Cell Technologies Office (FCTO) held the Electrolytic Hydrogen Production Workshop on February 27-28, 2014, at The National Renewable Energy Laboratory (NREL) in Golden, Colorado, to discuss and share information on the research, development, and demonstration (RD&D) needs for enabling low-cost, effective hydrogen

  4. Product Codes for Tracking Energy-Efficient Product Purchases...

    Broader source: Energy.gov (indexed) [DOE]

    The Federal Energy Management Program (FEMP) has mapped United Nations Standard Products and Services Codes (UNSPSCs) and Environmental Attribute Codes (ENACs) to the FEMP ...

  5. Special Feature: Reducing Energy Costs with Better Batteries

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Reducing Energy Costs with Better Batteries Special Feature: Reducing Energy Costs with Better Batteries September 9, 2013 Contact: Linda Vu, +1 510 495 2402, lvu@lbl.gov Electricvehicles8331019248.jpg Electric vehicles lined up in Cascade Locks. Credit: Oregon Department of Transportation A better battery-one that is cheap and safe, but packs a lot of power-could lead to an electric vehicle that performs better than today's gasoline-powered cars, and costs about the same or less to consumers.

  6. PPPL wins Department of Energy award for reducing greenhouse gases |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Princeton Plasma Physics Lab wins Department of Energy award for reducing greenhouse gases By Jeanne Jackson DeVoe October 2, 2012 Tweet Widget Google Plus One Share on Facebook PPPL engineer Tim Stevenson checks for possible leaks of sulfur hexafluoride (SF6), the gas used to insulate electronic equipment that has the potential to cause global warming at many times the rate of carbon dioxide. PPPL reduced leaks of SF6 by 65 percent over three years - reducing overall greenhouse gas

  7. Construction of energy-stable projection-based reduced order models

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Kalashnikova, Irina; Barone, Matthew F.; Arunajatesan, Srinivasan; van Bloemen Waanders, Bart G.

    2014-12-15

    Our paper aims to unify and extend several approaches for building stable projection-based reduced order models (ROMs) using the energy method and the concept of “energy-stability”. Attention is focused on linear time-invariant (LTI) systems. First, an approach for building energy stable Galerkin ROMs for linear hyperbolic or incompletely parabolic systems of partial differential equations (PDEs) using continuous projection is proposed. The key idea is to apply to the system a transformation induced by the Lyapunov function for the system, and to build the ROM in the transformed variables. The result of this procedure will be a ROM that is energy-stablemore » for any choice of reduced basis. It is shown that, for many PDE systems, the desired transformation is induced by a special inner product, termed the “symmetry inner product”. Next, attention is turned to building energy-stable ROMs via discrete projection. A discrete counterpart of the continuous symmetry inner product, termed the “Lyapunov inner product”, is derived. Moreover, it is shown that the Lyapunov inner product can be computed in a black-box fashion for a stable LTI system ari sing from the discretization of a system of PDEs in space. Projection in this inner product guarantees a ROM that is energy-stable, again for any choice of reduced basis. Connections between the Lyapunov inner product and the inner product induced by the balanced truncation algorithm are made. We also made comparisons between the symmetry inner product and the Lyapunov inner product. Performance of ROMs constructed using these inner products is evaluated on several benchmark test cases.« less

  8. Accelerate Energy Productivity 2030 fact sheet | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Accelerate Energy Productivity 2030 fact sheet Accelerate Energy Productivity 2030 fact sheet PDF icon Accelerate Energy Productivity 2030 Fact Sheet- Updated More Documents &...

  9. Boosting CSP Production with Thermal Energy Storage

    SciTech Connect (OSTI)

    Denholm, P.; Mehos, M.

    2012-06-01

    Combining concentrating solar power (CSP) with thermal energy storage shows promise for increasing grid flexibility by providing firm system capacity with a high ramp rate and acceptable part-load operation. When backed by energy storage capability, CSP can supplement photovoltaics by adding generation from solar resources during periods of low solar insolation. The falling cost of solar photovoltaic (PV) - generated electricity has led to a rapid increase in the deployment of PV and projections that PV could play a significant role in the future U.S. electric sector. The solar resource itself is virtually unlimited; however, the actual contribution of PV electricity is limited by several factors related to the current grid. The first is the limited coincidence between the solar resource and normal electricity demand patterns. The second is the limited flexibility of conventional generators to accommodate this highly variable generation resource. At high penetration of solar generation, increased grid flexibility will be needed to fully utilize the variable and uncertain output from PV generation and to shift energy production to periods of high demand or reduced solar output. Energy storage is one way to increase grid flexibility, and many storage options are available or under development. In this article, however, we consider a technology already beginning to be used at scale - thermal energy storage (TES) deployed with concentrating solar power (CSP). PV and CSP are both deployable in areas of high direct normal irradiance such as the U.S. Southwest. The role of these two technologies is dependent on their costs and relative value, including how their value to the grid changes as a function of what percentage of total generation they contribute to the grid, and how they may actually work together to increase overall usefulness of the solar resource. Both PV and CSP use solar energy to generate electricity. A key difference is the ability of CSP to utilize high

  10. Superior Energy Performance: Certifying Increased Energy Productivity...

    Broader source: Energy.gov (indexed) [DOE]

    ... years + 30 Best Practice Scorecard points Gold 10% energy performance improvement over 3 ... 2) Schneider Electric Columbia, MO GOLD SILVER 3M Company Cordova, IL MedImmune ...

  11. Milestone Reached: New Process Reduces Cost and Risk of Biofuel Production from Bio-Oil Upgrading

    Office of Energy Efficiency and Renewable Energy (EERE)

    Battelle—a nonprofit research and development organization that operates many of the national laboratories—reached an Energy Department project milestone to demonstrate at least 1,000 hours of bio-oil hydrotreatment on a single catalyst charge. Typically, it takes many catalysts to convert a bio-oil intermediate into biofuel, making the conversion process expensive. Battelle’s new process substantially reduces the cost and risk of biofuel production and helps make the process more commercially viable.

  12. Product Demonstrations | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Product Demonstrations Product Demonstrations The Consortium will pursue a number of demonstrations following the general procedure used by DOE's GATEWAY demonstration program. Specific products to be featured in a demonstration may be selected by the host site or may be suggested for a given installation by the Consortium based on the product's anticipated performance in that installation. In the latter case, products will be evaluated for suitability based on performance relative to other

  13. Water Heating Products and Services | Department of Energy

    Energy Savers [EERE]

    Find ENERGY STAR Gas Tankless Water Heaters ENERGY STAR Find ENERGY STAR Heat Pump Water Heaters ENERGY STAR Find ENERGY STAR Solar Water Heaters ENERGY STAR Find Product ...

  14. Product Efficiency Cases | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (OHA) on December 20, 2005, granting exception relief to Energy Savings Products, Ltd. (ESP) from the provisions of 10 C.F.R. Part 430, pertaining to energy conservation standards...

  15. 'Top 25' City Aims to Reduce Energy Use | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    According to Julie Smith, manager of McKinney's Office of Environmental Stewardship, the ... Smith believes that providing citizens with the tools to reduce their energy demand is ...

  16. USDA Helps Reduce High Energy Costs in Tribal Lands | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Helps Reduce High Energy Costs in Tribal Lands USDA Helps Reduce High Energy Costs in Tribal Lands September 17, 2015 - 3:08pm Addthis On Sept. 16, 2015, the U.S. Department of Agriculture (USDA) announced five grants to help reduce energy costs for tribes in Alaska, Arizona, and South Dakota where the cost of producing electricity is extremely high. Through the High Energy Cost Grant program, the USDA will provide $7.9 million to nine grantees to help improve the environment by reducing carbon

  17. Diesel vs Gasoline Production | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    "swing" between diesel and gasoline production deer08leister.pdf (217.54 KB) More Documents & Publications Marathon Sees Diesel Fuel in Future ITP Petroleum Refining: Energy ...

  18. Covered Product Category: Computers | Department of Energy

    Office of Environmental Management (EM)

    of hazardous materials and end-of-life management). ... Standby power is the electricity consumed by a product when ... costs 9 in energy consumption per computer over the ...

  19. Burney Forest Products | Open Energy Information

    Open Energy Info (EERE)

    Products provides renewable power to help California diversify its energy supplies from fossil fuel fired generation. Coordinates: 37.271881, -119.270233 Show Map Loading...

  20. Clean Energy Production Tax Credit (Personal)

    Broader source: Energy.gov [DOE]

    NOTE: Senate Bill 936 (Maryland Clean Energy Incentive Act of 2016) extended production tax credit for two years, from December 31, 2015 to December 31, 2018. 

  1. Clean Energy Production Tax Credit (Corporate)

    Broader source: Energy.gov [DOE]

    NOTE: Senate Bill 936 (Maryland Clean Energy Incentive Act of 2016) extended production tax credit for two years, from December 31, 2015 to December 31, 2018. 

  2. CMC/ BMC Utility Products | Open Energy Information

    Open Energy Info (EERE)

    Ohio Zip: 45015 Sector: Services, Solar, Wind energy Product: Installation; Maintenance and repair;Manufacturing Phone Number: 513-860-4455 Website: www.cmclugs.com...

  3. Geothermal Energy Production from Low Temperature Resources,...

    Open Energy Info (EERE)

    Geothermal Energy Production from Low Temperature Resources, Coproduced Fluids from Oil and Gas Wells, and Geopressured Resources Jump to: navigation, search Geothermal ARRA Funded...

  4. Biological Hydrogen Production Workshop | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Biological Hydrogen Production Workshop Biological Hydrogen Production Workshop The U.S. Department of Energy's (DOE's) National Renewable Energy Laboratory (NREL) held a Biological Hydrogen Production Workshop on September 24-25, 2013, in Golden, Colorado. The workshop featured 29 participants representing academia, government, and national laboratories with expertise in the relevant fields. The objective of the Biological Hydrogen Production Workshop was to share information and identify

  5. Wood Energy Production Credit | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    be claimed for a period of five years; total tax credits cap set at 6,000,000 annually, subject to appropriations Program Info Sector Name State Administrator Division of Energy...

  6. REDUCING POWER PRODUCTION COSTS BY UTILIZING PETROLEUM COKE

    SciTech Connect (OSTI)

    Kevin C. Galbreath; Donald L. Toman; Christopher J. Zygarlicke

    1999-09-01

    Petroleum coke, a byproduct of the petroleum-refining process, is an attractive primary or supplemental fuel for power production primarily because of a progressive and predictable increase in the production volumes of petroleum coke (1, 2). Petroleum coke is most commonly blended with coal in proportions suitable to meet sulfur emission compliance. Petroleum coke is generally less reactive than coal; therefore, the cofiring of petroleum coke with coal typically improves ignition, flame stability, and carbon loss relative to the combustion of petroleum coke alone. Although petroleum coke is a desirable fuel for producing relatively inexpensive electrical power, concerns about the effects of petroleum coke blending on combustion and pollution control processes exist in the coal-fired utility industry (3). The Energy & Environmental Research Center (EERC) completed a 2-year technical assessment of petroleum coke as a supplemental fuel. A survey questionnaire was sent to seven electric utility companies that are currently cofiring coal and petroleum coke in an effort to solicit specific suggestions on research needs and fuel selections. An example of the letter and survey questionnaire is presented in Appendix A. Interest was expressed by most utilities in evaluating the effects of petroleum coke blending on grindability, combustion reactivity, fouling, slagging, and fly ash emissions control. Unexpectedly, concern over corrosion was not expressed by the utilities contacted. Although all seven utilities responded to the question, only two utilities, Northern States Power Company (NSP) and Ameren, sent fuels to the EERC for evaluation. Both utilities sent subbituminous coals from the Power River Basin and petroleum shot coke samples. Petroleum shot coke is produced unintentionally during operational upsets in the petroleum refining process. This report evaluates the effects of petroleum shot coke blending on grindability, fuel reactivity, fouling/slagging, and

  7. Reduced Energy Consumption through the Development of Fuel-Flexible Gas Turbines

    Broader source: Energy.gov (indexed) [DOE]

    America Top Innovation | Department of Energy Photo of a home with a fence. Engaging production builders to build high-performance homes is key to successfully transforming the market. For this Top Innovation, Building America has effectively addressed this challenge by demonstrating the compelling linkage between high-performance homes and reduced call-backs. When Grupe of Stockton, California, worked with Building America to build 144 energy efficient homes, the site superintendent said he

  8. Promoting greater Federal energy productivity [Final report

    SciTech Connect (OSTI)

    Hopkins, Mark; Dudich, Luther

    2003-03-05

    This document is a close-out report describing the work done under this DOE grant to improve Federal Energy Productivity. Over the four years covered in this document, the Alliance To Save Energy conducted liaison with the private sector through our Federal Energy Productivity Task Force. In this time, the Alliance held several successful workshops on the uses of metering in Federal facilities and other meetings. We also conducted significant research on energy efficiency, financing, facilitated studies of potential energy savings in energy intensive agencies, and undertook other tasks outlined in this report.

  9. TopTen Energy Efficient Products Website | Open Energy Information

    Open Energy Info (EERE)

    URI: cleanenergysolutions.orgcontenttopten-energy-efficient-products-webs Language: English Policies: "Deployment Programs,Regulations" is not in the list of possible...

  10. Colorado: Energy Modeling Products Support Energy Efficiency Projects

    Broader source: Energy.gov [DOE]

    Xcel Energy, a Minnesota-based utility that supplies electricity and natural gas to eight states, employed two EERE-developed products in developing a program management tool for its Energy Design Assistance (EDA) program. Through EDA, Xcel provides energy consulting services to construction projects to encourage efficient energy use.

  11. New Air Cleaning Strategies for Reduced Commercial Building Ventilation Energy

    SciTech Connect (OSTI)

    Sidheswaran, Meera; Destaillats, Hugo; Sullivan, Douglas P.; Fisk, William J.

    2010-10-27

    Approximately ten percent of the energy consumed in U.S. commercial buildings is used by HVAC systems to condition outdoor ventilation air. Reducing ventilation rates would be a simple and broadly-applicable energy retrofit option, if practical counter measures were available that maintained acceptable concentrations of indoor-generated air pollutants. The two general categories of countermeasures are: 1) indoor pollutant source control, and 2) air cleaning. Although pollutant source control should be used to the degree possible, source control is complicated by the large number and changing nature of indoor pollutant sources. Particle air cleaning is already routinely applied in commercial buildings. Previous calculations indicate that particle filtration consumes only 10percent to 25percent of the energy that would otherwise be required to achieve an equivalent amount of particle removal with ventilation. If cost-effective air cleaning technologies for volatile organic compounds (VOCs) were also available, outdoor air ventilation rates could be reduced substantially and broadly in the commercial building stock to save energy. The research carried out in this project focuses on developing novel VOC air cleaning technologies needed to enable energy-saving reductions in ventilation rates. The minimum required VOC removal efficiency to counteract a 50percent reduction in ventilation rate for air cleaning systems installed in the HVAC supply airstream is modest (generally 20percent or less).

  12. Energy spectrum, dissipation, and spatial structures in reduced Hall magnetohydrodynamic

    SciTech Connect (OSTI)

    Martin, L. N.; Dmitruk, P.; Gomez, D. O.

    2012-05-15

    We analyze the effect of the Hall term in the magnetohydrodynamic turbulence under a strong externally supported magnetic field, seeing how this changes the energy cascade, the characteristic scales of the flow, and the dynamics of global magnitudes, with particular interest in the dissipation. Numerical simulations of freely evolving three-dimensional reduced magnetohydrodynamics are performed, for different values of the Hall parameter (the ratio of the ion skin depth to the macroscopic scale of the turbulence) controlling the impact of the Hall term. The Hall effect modifies the transfer of energy across scales, slowing down the transfer of energy from the large scales up to the Hall scale (ion skin depth) and carrying faster the energy from the Hall scale to smaller scales. The final outcome is an effective shift of the dissipation scale to larger scales but also a development of smaller scales. Current sheets (fundamental structures for energy dissipation) are affected in two ways by increasing the Hall effect, with a widening but at the same time generating an internal structure within them. In the case where the Hall term is sufficiently intense, the current sheet is fully delocalized. The effect appears to reduce impulsive effects in the flow, making it less intermittent.

  13. Feedstocks with Reduced Acetylation for Higher Product Yields...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Institute (JBEI) has developed a method of using plants that have reduced levels of acetylation of their cellulose. The plants are positioned to provide higher yields of sugar ...

  14. Energy conservation in ethylene production

    SciTech Connect (OSTI)

    Kobayashi, N.

    1983-10-01

    The petrochemical industry is one of the most important industries and is of critical importance to the steel industry, petroleum refining industry and other heavy-and-chemical industries. These heavy-andchemical industries are the basis of the driving and growing force of the Japanese economic progress. And these industries consume a large amount of material and energy. Last year, the Chiba Plant won a commendation for being an excellent energy-controlling plant by the Chief of Resources and Energy Office. It was the first commendation among the many ethylene units. In light of this, the authors have prepared a review of the efforts in the field of saving energy in ethylene unit.

  15. Metal and Glass Manufacturers Reduce Costs by Increasing Energy Efficiency in Process Heating Systems

    Broader source: Energy.gov [DOE]

    Process heating plays a key role in producing steel, aluminum, and glass and in manufacturing products made from these materials. Faced with regulatory and competitive pressures to control emissions and reduce operating costs, metal and glass manufacturers are considering a variety of options for reducing overall energy consumption. As 38% of the energy used in U.S. industrial plants is consumed for process heating applications, metal and glass manufacturers are discovering that process heating technologies provide significant opportunities for improving industrial productivity, energy efficiency, and global competitiveness. This fact sheet is the first in a series to describe such opportunities that can be realized in industrial systems by conducting plant-wide assessments (PWA).

  16. Energy-Efficient Product Procurement for Federal Agencies (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-08-01

    Overview of the U.S. Department of Energy Federal Energy Management Program Energy-Efficient Product Procurement Program.

  17. Hydrogen Production Related Links | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Production Related Links Hydrogen Production Related Links The following resources provide details about U.S. Department of Energy (DOE)-funded hydrogen production activities, research plans and roadmaps, models and tools, and additional related links. DOE-Funded Hydrogen Production Activities Each year, hydrogen and fuel cell projects funded by DOE's Hydrogen and Fuel Cells Program are reviewed for their merit during an Annual Merit Review and Peer Evaluation Meeting. View posters and

  18. Procuring Energy-Efficient Products (Fact Sheet) (Revised)

    SciTech Connect (OSTI)

    Not Available

    2012-08-01

    Overview of the U.S. Department of Energy Federal Energy Management Program Energy-Efficient Product Procurement Program and its designated product category list.

  19. Purified silicon production system - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    020022088 Site Map Printable Version Share this resource About Search Categories (15) Advanced Materials Biomass and Biofuels Building Energy Efficiency Electricity Transmission Energy Analysis Energy Storage Geothermal Hydrogen and Fuel Cell Hydropower, Wave and Tidal Industrial Technologies Solar Photovoltaic Solar Thermal Startup America Vehicles and Fuels Wind Energy Partners (27) Visual Patent Search Success Stories Return to Search Purified silicon production system United States Patent

  20. Purified silicon production system - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    19429 Site Map Printable Version Share this resource About Search Categories (15) Advanced Materials Biomass and Biofuels Building Energy Efficiency Electricity Transmission Energy Analysis Energy Storage Geothermal Hydrogen and Fuel Cell Hydropower, Wave and Tidal Industrial Technologies Solar Photovoltaic Solar Thermal Startup America Vehicles and Fuels Wind Energy Partners (27) Visual Patent Search Success Stories Return to Search Purified silicon production system United States Patent

  1. Method for reducing energy losses in laser crystals

    DOE Patents [OSTI]

    Atherton, L.J.; DeYoreo, J.J.; Roberts, D.H.

    1992-03-24

    A process for reducing energy losses in crystals is disclosed which comprises: a. heating a crystal to a temperature sufficiently high as to cause dissolution of microscopic inclusions into the crystal, thereby converting said inclusions into point-defects, and b. maintaining said crystal at a given temperature for a period of time sufficient to cause said point-defects to diffuse out of said crystal. Also disclosed are crystals treated by the process, and lasers utilizing the crystals as a source of light. 12 figs.

  2. Method for reducing energy losses in laser crystals

    DOE Patents [OSTI]

    Atherton, L. Jeffrey; DeYoreo, James J.; Roberts, David H.

    1992-01-01

    A process for reducing energy losses in crystals is disclosed which comprises: a. heating a crystal to a temperature sufficiently high as to cause dissolution of microscopic inclusions into the crystal, thereby converting said inclusions into point-defects, and b. maintaining said crystal at a given temperature for a period of time sufficient to cause said point-defects to diffuse out of said crystal. Also disclosed are crystals treated by the process, and lasers utilizing the crystals as a source of light.

  3. Contract Language for Energy-Consuming Product Purchases | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Products & Technologies » Energy-Efficient Products » Contract Language for Energy-Consuming Product Purchases Contract Language for Energy-Consuming Product Purchases Federal agencies are required to use specific contract language when purchasing energy-consuming products that are qualified by ENERGY STAR or designated by the Federal Energy Management Program (FEMP). See energy-efficient product purchasing requirements. Federal Acquisition Regulation Contract Language Federal

  4. Environmentally conscious alternative energy production

    SciTech Connect (OSTI)

    Kutz, M.

    2007-09-15

    This fourth volume of the series describes and compares the environmental and economic impacts of renewable and conventional power generation technologies. Chapter heading are: Economic comparisons of power generation technologies (Todd Nemec); Solar energy applications (Jan F. Kreider); Fuel cells (Matthew W. Mench); Geothermal resources and technology: an introduction (Peter D. Blair); Wind power generation (Todd Nemec); Cogeneration (Jerald Caton); Hydrogen energy (Elias K. Stefanakos, Yogi Goswami, S.S. Srinivasan, and J.T. Wolan); Clean power generation from coal (Prabir Basu and James Butler); and Using waste heat from power plants (Herbert A. Ingley). The chapter on clean coal power generation from coal has been abstracted separately on the Coal Abstracts database. 2 apps.

  5. Relighting for energy efficiency and productivity

    SciTech Connect (OSTI)

    Harris, L. ); Purcell, C.W. )

    1992-01-01

    This paper presents an overview of the process and approach of the Federal Relighting Initiative (FRI). It describes the major steps in relighting Federal buildings for energy efficiency and increased productivity.

  6. Relighting for energy efficiency and productivity

    SciTech Connect (OSTI)

    Harris, L.; Purcell, C.W.

    1992-10-01

    This paper presents an overview of the process and approach of the Federal Relighting Initiative (FRI). It describes the major steps in relighting Federal buildings for energy efficiency and increased productivity.

  7. Made in Minnesota Solar Energy Production Incentive

    Broader source: Energy.gov [DOE]

    Since January 2014, The Department of Commerce (DOC) has administered the Made in Minnesota Solar Energy Production Incentive pursuant to H.F. 729, which was enacted in May 2013. Systems must be ...

  8. Hydrogen Production: Coal Gasification | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Coal Gasification Hydrogen Production: Coal Gasification The U.S. Department of Energy (DOE) Office of Fossil Energy supports activities to advance coal-to-hydrogen technologies, specifically through the process of coal gasification with carbon capture, utilization, and storage. DOE anticipates that coal gasification for hydrogen production with carbon capture, utilization, and storage could be deployed in the mid-term time frame. How Does It Work? Chemically, coal is a complex and highly

  9. Communication Product Templates | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Templates Communication Product Templates The Office of Energy Efficiency and Renewable Energy (EERE) has EERE-branded templates for CDs and CD covers, certificates, PowerPoint presentations, and various print and publication documents. EERE has designed templates to support EERE staff and contractors in developing communication products quickly and efficiently. Use of these templates is optional. CDs and CD covers Certificate Templates Conference Poster and Name Tag Templates PowerPoint

  10. Nation Leads Wind Energy Production and Innovation | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Nation Leads Wind Energy Production and Innovation Nation Leads Wind Energy Production and Innovation May 11, 2016 - 12:19pm Addthis Letter from the Wind Program Director This spring edition of the Wind Program Newsletter comes at the juncture of two important events for the wind industry: the 1-year anniversary of the U.S. Department of Energy Wind Program's historic Wind Vision Report and the start of American Wind Energy Association (AWEA) WINDPOWER 2016. We have quite a bit to celebrate this

  11. Strategies to reduce end-product inhibition in family 48 glycoside hydrolases

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Chen, Mo; Bu, Lintao; Alahuhta, Markus; Brunecky, Roman; Xu, Qi; Lunin, Vladimir V.; Brady, John W.; Crowley, Michael F.; Himmel, Michael E.; Bomble, Yannick J.

    2016-02-01

    Family 48 cellobiohydrolases are some of the most abundant glycoside hydrolases in nature. They are able to degrade cellulosic biomass and therefore serve as good enzyme candidates for biofuel production. Family 48 cellulases hydrolyze cellulose chains via a processive mechanism, and produce end products composed primarily of cellobiose as well as other cellooligomers (dp ≤ 4). The challenge of utilizing cellulases in biofuel production lies in their extremely slow turnover rate. A factor contributing to the low enzyme activity is suggested to be product binding to enzyme and the resulting performance inhibition. In this study, we quantitatively evaluated the productmore » inhibitory effect of four family 48 glycoside hydrolases using molecular dynamics simulations and product expulsion free-energy calculations. We also suggested a series of single mutants of the four family 48 glycoside hydrolases with theoretically reduced level of product inhibition. As a result, the theoretical calculations provide a guide for future experimental studies designed to produce mutant cellulases with enhanced activity.« less

  12. Rocky Mountain area petroleum product availability with reduced PADD IV refining capacity

    SciTech Connect (OSTI)

    Hadder, G.R.; Chin, S.M.

    1994-02-01

    Studies of Rocky Mountain area petroleum product availability with reduced refining capacity in Petroleum Administration for Defense IV (PADD IV, part of the Rocky Mountain area) have been performed with the Oak Ridge National Laboratory Refinery Yield Model, a linear program which has been updated to blend gasolines to satisfy constraints on emissions of nitrogen oxides and winter toxic air pollutants. The studies do not predict refinery closures in PADD IV. Rather, the reduced refining capacities provide an analytical framework for probing the flexibility of petroleum refining and distribution for winter demand conditions in the year 2000. Industry analysts have estimated that, for worst case scenarios, 20 to 35 percent of PADD IV refining capacity could be shut-down as a result of clean air and energy tax legislation. Given these industry projections, the study scenarios provide the following conclusions: The Rocky Mountain area petroleum system would have the capability to satisfy winter product demand with PADD IV refinery capacity shut-downs in the middle of the range of industry projections, but not in the high end of the range of projections. PADD IV crude oil production can be maintained by re-routing crude released from PADD IV refinery demands to satisfy increased crude oil demands in PADDs II (Midwest), III (Gulf Coast), and Washington. Clean Air Act product quality regulations generally do not increase the difficulty of satisfying emissions reduction constraints in the scenarios.

  13. Full PWA Report: An Assessment of Energy, Waste, and Productivity Improvements for North Star Steel Iowa

    SciTech Connect (OSTI)

    2010-06-25

    North Star Steel's Wilton, Iowa plant (NSSI) was awarded a subcontract through a competitive process to use Department of Energy/OIT funding to examine potential processes and technologies that could save energy, reduce waste, and increase productivity.

  14. stochastic energy production cost model simulator for electric...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    energy production cost model simulator for electric power systems - Sandia Energy Energy ... Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable ...

  15. Energy Department Policy on Acquiring Tribal Renewable Energy Products

    Office of Energy Efficiency and Renewable Energy (EERE)

    As part of the Department of Energy’s efforts to support tribal renewable energy production, Secretary Steven Chu has issued a policy statement and guidance to give preference to Indian Tribes when...

  16. Sell Energy-Efficient Products (Fact Sheet), Federal Energy Management...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    500 billion on goods and services every year and 20 billion on energy. For many product types, the U.S. Government is the ... datasets, industry organizations, and manufacturers-for ...

  17. Process for production of synthesis gas with reduced sulfur content

    DOE Patents [OSTI]

    Najjar, Mitri S.; Corbeels, Roger J.; Kokturk, Uygur

    1989-01-01

    A process for the partial oxidation of a sulfur- and silicate-containing carbonaceous fuel to produce a synthesis gas with reduced sulfur content which comprises partially oxidizing said fuel at a temperature in the range of 1800.degree.-2200.degree. F. in the presence of a temperature moderator, an oxygen-containing gas and a sulfur capture additive which comprises an iron-containing compound portion and a sodium-containing compound portion to produce a synthesis gas comprising H.sub.2 and CO with a reduced sulfur content and a molten slag which comprises (i) a sulfur-containing sodium-iron silicate phase and (ii) a sodium-iron sulfide phase. The sulfur capture additive may optionally comprise a copper-containing compound portion.

  18. US Energy Production over the Years Data | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    US Energy Production over the Years Data US Energy Production over the Years Data total_states_link.xlsx (93.19 KB) total_sectors_link.xls (44.5 KB) us_93_02_v3.json (437.85 KB) More Documents & Publications ESPC Project Performance: Supplemental Data Noise and Vibration Impact Assessment Methodology Audit Report: OAS-FS-12-06

  19. Mass independent kinetic energy reducing inlet system for vacuum environment

    DOE Patents [OSTI]

    Reilly, Peter T. A. [Knoxville, TN

    2010-12-14

    A particle inlet system comprises a first chamber having a limiting orifice for an incoming gas stream and a micrometer controlled expansion slit. Lateral components of the momentum of the particles are substantially cancelled due to symmetry of the configuration once the laminar flow converges at the expansion slit. The particles and flow into a second chamber, which is maintained at a lower pressure than the first chamber, and then moves into a third chamber including multipole guides for electromagnetically confining the particle. The vertical momentum of the particles descending through the center of the third chamber is minimized as an upward stream of gases reduces the downward momentum of the particles. The translational kinetic energy of the particles is near-zero irrespective of the mass of the particles at an exit opening of the third chamber, which may be advantageously employed to provide enhanced mass resolution in mass spectrometry.

  20. Mass independent kinetic energy reducing inlet system for vacuum environment

    DOE Patents [OSTI]

    Reilly, Peter T.A.

    2013-12-03

    A particle inlet system comprises a first chamber having a limiting orifice for an incoming gas stream and a micrometer controlled expansion slit. Lateral components of the momentum of the particles are substantially cancelled due to symmetry of the configuration once the laminar flow converges at the expansion slit. The particles and flow into a second chamber, which is maintained at a lower pressure than the first chamber, and then moves into a third chamber including multipole guides for electromagnetically confining the particle. The vertical momentum of the particles descending through the center of the third chamber is minimized as an upward stream of gases reduces the downward momentum of the particles. The translational kinetic energy of the particles is near-zero irrespective of the mass of the particles at an exit opening of the third chamber, which may be advantageously employed to provide enhanced mass resolution in mass spectrometry.

  1. Mass independent kinetic energy reducing inlet system for vacuum environment

    DOE Patents [OSTI]

    Reilly, Peter T.A.

    2014-05-13

    A particle inlet system comprises a first chamber having a limiting orifice for an incoming gas stream and a micrometer controlled expansion slit. Lateral components of the momentum of the particles are substantially cancelled due to symmetry of the configuration once the laminar flow converges at the expansion slit. The particles and flow into a second chamber, which is maintained at a lower pressure than the first chamber, and then moves into a third chamber including multipole guides for electromagnetically confining the particle. The vertical momentum of the particles descending through the center of the third chamber is minimized as an upward stream of gases reduces the downward momentum of the particles. The translational kinetic energy of the particles is near-zero irrespective of the mass of the particles at an exit opening of the third chamber, which may be advantageously employed to provide enhanced mass resolution in mass spectrometry.

  2. Controlled cooling of an electronic system for reduced energy consumption

    DOE Patents [OSTI]

    David, Milnes P.; Iyengar, Madhusudan K.; Schmidt, Roger R.

    2016-08-09

    Energy efficient control of a cooling system cooling an electronic system is provided. The control includes automatically determining at least one adjusted control setting for at least one adjustable cooling component of a cooling system cooling the electronic system. The automatically determining is based, at least in part, on power being consumed by the cooling system and temperature of a heat sink to which heat extracted by the cooling system is rejected. The automatically determining operates to reduce power consumption of the cooling system and/or the electronic system while ensuring that at least one targeted temperature associated with the cooling system or the electronic system is within a desired range. The automatically determining may be based, at least in part, on one or more experimentally obtained models relating the targeted temperature and power consumption of the one or more adjustable cooling components of the cooling system.

  3. Clean Energy Manufacturing Initiative Industrial Efficiency and Energy Productivity Video

    Broader source: Energy.gov [DOE]

    Industrial efficiency and low-cost energy resources are key components to increasing U.S. energy productivity and makes the U.S. manufacturing sector more competitive. Companies find a competitive advantage in implementing efficiency technologies and practices, and technologies developed and manufactured in the U.S. enable greater competitiveness economy-wide.

  4. Clean Energy Manufacturing Initiative Industrial Efficiency and Energy Productivity

    ScienceCinema (OSTI)

    Selldorff, John; Atwell, Monte

    2014-12-03

    Industrial efficiency and low-cost energy resources are key components to increasing U.S. energy productivity and makes the U.S. manufacturing sector more competitive. Companies find a competitive advantage in implementing efficiency technologies and practices, and technologies developed and manufactured in the U.S. enable greater competitiveness economy-wide.

  5. Clean Energy Manufacturing Initiative Industrial Efficiency and Energy Productivity

    SciTech Connect (OSTI)

    Selldorff, John; Atwell, Monte

    2014-09-23

    Industrial efficiency and low-cost energy resources are key components to increasing U.S. energy productivity and makes the U.S. manufacturing sector more competitive. Companies find a competitive advantage in implementing efficiency technologies and practices, and technologies developed and manufactured in the U.S. enable greater competitiveness economy-wide.

  6. Reducing Industrial Energy Intensity in the Southeast Project Fact Sheet

    Broader source: Energy.gov [DOE]

    This fact sheet contains details regarding a Save Energy Now industrial energy efficiency project that the U.S. Department of Energy funded in Mississippi.

  7. Environmental consequences of energy production: Proceedings

    SciTech Connect (OSTI)

    none,

    1989-01-01

    The Seventeenth Annual Illinois Energy conference entitled Environmental consequences of Energy Production was held in Chicago, Illinois on October 19-20, 1989. The purpose of the meeting was to provide a forum for exchange of information on the technical, economic and institutional issues surrounding energy production and related environmental problems. The conference program was developed by a planning committee which included Illinois energy and environmental specialists from the major sectors including energy industries, environmental organizations, research universities, utility companies, federal, state and local government agencies, and public interest groups. The conference included presentations on four major topic areas. The issue areas were: urban pollution: where are we now and what needs to be done in the future; the acid rain problem: implications of proposed federal legislation on the Midwest; global warming: an update on the scientific debate; and strategies to minimize environmental damage. Separate abstracts have been prepared for the individual presentations. (FL)

  8. Energy-Efficient Products and Energy-Saving Technologies | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Energy-Efficient Products and Energy-Saving Technologies Energy-Efficient Products and Energy-Saving Technologies The Federal Energy Management Program (FEMP) provides information about energy-efficient products and promising new energy-saving technologies that can help agencies meet federal laws and requirements. Explore this section to learn about: Energy- and water-efficient products: Find products covered by federal efficiency programs, product purchasing specifications, and more.

  9. Assessment of Energy Production Potential from Ocean Currents...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Assessment of Energy Production Potential from Ocean Currents along the United States Coastline Assessment of Energy Production Potential from Ocean Currents along the United...

  10. GTP energy production from low-temperature resources, coproduced...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    GTP energy production from low-temperature resources, coproduced fluids, and geopressured resources. GTP energy production from low-temperature resources, coproduced fluids, and ...

  11. Geothermal Energy Production with Co-produced and Geopressured...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Production with Co-produced and Geopressured Resources (Fact Sheet), Geothermal Technologies Program (GTP) Geothermal Energy Production with Co-produced and Geopressured ...

  12. Production of Energy Efficient Preform Structures (PEEPS) (Technical...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: Production of Energy Efficient Preform Structures (PEEPS) Citation Details In-Document Search Title: Production of Energy Efficient Preform Structures (PEEPS) ...

  13. Osmotic Heat Engine for Energy Production from Low Temperature...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Osmotic Heat Engine for Energy Production from Low Temperature Geothermal Resources Osmotic Heat Engine for Energy Production from Low Temperature Geothermal Resources Project ...

  14. Assessment of Energy Production Potential from Ocean Currents...

    Broader source: Energy.gov (indexed) [DOE]

    Assessment of Energy Production Potential from Ocean Currents along the United States ... Award Number: DE-EE0002661 Project Title: Assessment of Energy Production Potential from ...

  15. Electricity production and cooling energy savings from installation...

    Office of Scientific and Technical Information (OSTI)

    Electricity production and cooling energy savings from installation of a ... Citation Details In-Document Search Title: Electricity production and cooling energy ...

  16. Buy Energy-Efficient Products: A Guide for Federal Purchasers...

    Energy Savers [EERE]

    Buy Energy-Efficient Products: A Guide for Federal Purchasers and Specifiers Buy Energy-Efficient Products: A Guide for Federal Purchasers and Specifiers Document encourages ...

  17. Nanolipoprotein Particles for Hydrogen Production - Energy Innovation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Portal Hydrogen and Fuel Cell Hydrogen and Fuel Cell Find More Like This Return to Search Nanolipoprotein Particles for Hydrogen Production Lawrence Livermore National Laboratory Contact LLNL About This Technology Technology Marketing Summary Lawrence Livermore National Laboratory has developed a method using nanolipoprotein particles (NLP) to solubilize and isolate membrane bound hydrogenases for the biological production of hydrogen. Hydrogen is a renewable energy carrier that has the

  18. Hydrogen Production Processes | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Processes Hydrogen Production Processes Hydrogen can be produced using a number of different processes. Thermochemical processes use heat and chemical reactions to release hydrogen from organic materials such as fossil fuels and biomass. Water (H2O) can be split into hydrogen (H2) and oxygen (O2) using electrolysis or solar energy. Microorganisms such as bacteria and algae can produce hydrogen through biological processes. Thermochemical Processes Some thermal processes use the energy in various

  19. India's Fertilizer Industry: Productivity and Energy Efficiency

    SciTech Connect (OSTI)

    Schumacher, K.; Sathaye, J.

    1999-07-01

    Historical estimates of productivity growth in India's fertilizer sector vary from indicating an improvement to a decline in the sector's productivity. The variance may be traced to the time period of study, source of data for analysis, and type of indices and econometric specifications used for reporting productivity growth. Our analysis shows that in the twenty year period, 1973 to 1993, productivity in the fertilizer sector increased by 2.3% per annum. An econometric analysis reveals that technical progress in India's fertilizer sector has been biased towards the use of energy, while it has been capital and labor saving. The increase in productivity took place during the era of total control when a retention price system and distribution control was in effect. With liberalization of the fertilizer sector and reduction of subsidies productivity declined substantially since the early 1990s. Industrial policies and fiscal incentives still play a major role in the Indian fertilizer sect or. As substantial energy savings and carbon reduction potential exists, energy policies can help overcome barriers to the adoption of these measures in giving proper incentives and correcting distorted prices.

  20. Saving Energy and Reducing Emissions with Fuel-Flexible Burners

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the byproducts of biodiesel production, present a viable alternative to natural gas for process heating applications. Two components of biodiesel production are glycerin ...

  1. EECBG Success Story: Energy Detectives Help Pennsylvania Town Reduce Costs

    Broader source: Energy.gov [DOE]

    Upper Darby Township, Pennsylvania received a $695,600 Energy Efficiency and Conservation Block Grant (EECBG) through the Recovery Act to study its energy use and set conservation goals with help from Mondre Energy. Learn more.

  2. Reducing Plug Loads in Office Spaces: Hawaii and Guam Energy...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Guam Energy Improvement Technology Demonstration Project M. Sheppy, I. Metzger, D. ... Guam Energy Improvement Technology Demonstration Project M. Sheppy, I. Metzger, D. ...

  3. Reduce Operating Costs with an EnergySmart School Project

    Broader source: Energy.gov [DOE]

    EnergySmart Schools fact sheet on how school operations and maintenance (O&M) personnel can play a greater role in managing ever-increasing energy costs.

  4. Reducing Data Center Loads for a Large-scale, Low Energy Office...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Data Center Loads for a Large- scale, Low-energy Office Building: NREL's Research Support ... National Renewable Energy Laboratory Reducing Data Center Loads for a Large-Scale, ...

  5. Lighting and Daylighting Products and Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lighting and Daylighting Products and Services Lighting and Daylighting Products and Services Lighting and Daylighting Products and Services Use the following links to get product information and locate professional services for lighting and daylighting. Product Information Advanced Lighting Package ENERGY STAR® Information on the ENERGY STAR Advanced Lighting Project, which allows homeowners to upgrade their light fixtures to more energy efficient products. ENERGY STAR Lightbulbs ENERGY STAR®

  6. Clean Energy Manufacturing Resources - Technology Full-Scale Production |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Full-Scale Production Clean Energy Manufacturing Resources - Technology Full-Scale Production Clean Energy Manufacturing Resources - Technology Full-Scale Production Find resources to help you design a production and manufacturing process for a new clean energy technology or product. For full-scale production, other areas to consider include workforce development; R&D funding; and regional, state, and local resources. For more resources, see the Clean Energy

  7. Energy & Financial Markets: What drives petroleum product prices - Energy

    U.S. Energy Information Administration (EIA) Indexed Site

    Information Administration Petprod - U.S. Energy Information Administration (EIA) U.S. Energy Information Administration - EIA - Independent Statistics and Analysis Sources & Uses Petroleum & Other Liquids Crude oil, gasoline, heating oil, diesel, propane, and other liquids including biofuels and natural gas liquids. Natural Gas Exploration and reserves, storage, imports and exports, production, prices, sales. Electricity Sales, revenue and prices, power plants, fuel use, stocks,

  8. IMPROVING ENERGY EFFICIENCY AND REDUCING COSTS IN THE DRINKING WATER SUPPLY INDUSTRY: An ENERGY STAR Resource Guide for Energy and Plant Managers

    SciTech Connect (OSTI)

    Melody, Moya; Dunham Whitehead, Camilla; Brown, Richard

    2010-09-30

    As American drinking water agencies face higher production costs, demand, and energy prices, they seek opportunities to reduce costs without negatively affecting the quality of the water they deliver. This guide describes resources for cost-effectively improving the energy efficiency of U.S. public drinking water facilities. The guide (1) describes areas of opportunity for improving energy efficiency in drinking water facilities; (2) provides detailed descriptions of resources to consult for each area of opportunity; (3) offers supplementary suggestions and information for the area; and (4) presents illustrative case studies, including analysis of cost-effectiveness.

  9. High-Tech Garage Showcases Strategies for Reducing Energy (Fact Sheet), NREL (National Renewable Energy Laboratory)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    High-Tech Garage Showcases Strategies for Reducing Energy Even from a distance, the parking structure on the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) campus doesn't look like an ordinary parking garage. And it doesn't act like one either. NREL's parking structure, which opened in 2012, proves that large garages can be designed and built sustainably-at no additional cost. In addition to meeting staff needs with up to 1,800 parking spaces, this 578,320 square-foot,

  10. Implementing the Data Center Energy Productivity Metric

    SciTech Connect (OSTI)

    Sego, Landon H.; Marquez, Andres; Rawson, Andrew; Cader, Tahir; Fox, Kevin M.; Gustafson, William I.; Mundy, Christopher J.

    2012-10-01

    As data centers proliferate in both size and number, their energy efficiency is becoming increasingly important. We discuss the properties of a number of the proposed metrics of energy efficiency and productivity. In particular, we focus on the Data Center Energy Productivity (DCeP) metric, which is the ratio of useful work produced by the data center to the energy consumed performing that work. We describe our approach for using DCeP as the principal outcome of a designed experiment using a highly instrumented, high performance computing data center. We found that DCeP was successful in clearly distinguishing between different operational states in the data center, thereby validating its utility as a metric for identifying configurations of hardware and software that would improve (or even maximize) energy productivity. We also discuss some of the challenges and benefits associated with implementing the DCeP metric, and we examine the efficacy of the metric in making comparisons within a data center and among data centers.

  11. NREL's Renewable Energy Development Expertise Reduces Project Risks (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-12-01

    This National Renewable Energy Laboratory (NREL) success story fact sheet highlights a June 2012 solar power purchase agreement between the Virgin Islands Water and Power Authority and three corporations. The fact sheet describes how technical assistance from DOE's National Renewable Energy Laboratory enabled the U.S. Virgin Islands to realistically assess its clean energy resources and identify the most viable and cost-effective solutions to its energy challenges--resulting in a $65 million investment in solar energy in the territory.

  12. Reduce Waste and Save Energy this Holiday Season | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Wrap your gifts with recycled paper to reduce waste and save money. | Photo courtesy of istockphotodiane555 Wrap your gifts with recycled paper to reduce waste and save money. |...

  13. Reducing LED Costs Through Innovation | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reducing LED Costs Through Innovation Reducing LED Costs Through Innovation November 19, 2013 - 3:49pm Addthis A combination solid-state laser turret cutter and stamping machine ...

  14. Hybrid Solar Lighting Provides Energy Savings and Reduces Waste Heat

    SciTech Connect (OSTI)

    Lapsa, Melissa Voss; Maxey, L Curt; Earl, Dennis Duncan; Beshears, David L; Ward, Christina D; Parks, James Edgar

    2006-01-01

    ABSTRACT Artificial lighting is the largest component of electricity use in commercial U.S. buildings. Hybrid solar lighting (HSL) provides an exciting new means of reducing energy consumption while also delivering significant ancillary benefits associated with natural lighting in buildings. As more than half of all federal facilities are in the Sunbelt region (defined as having an average direct solar radiation of greater than 4 kWh/m2/day) and as more than half of all square footage available in federal buildings is also in the Sunbelt, HSL is an excellent technology fit for federal facilities. The HSL technology uses a rooftop, 4-ft-wide dish and secondary mirror that track the sun throughout the day (Fig. 1). The collector system focuses the sunlight onto 127 optical fibers. The fibers serve as flexible light pipes and are connected to hybrid light fixtures that have special diffusion rods that spread out the light in all directions. One collector powers about eight hybrid light fixtures-which can illuminate about 1,000 square feet. The system tracks at 0.1 accuracy, required by the two-mirror geometry to keep the focused beam on the fiber bundle. When sunlight is plentiful, the optical fibers in the luminaires provide all or most of the light needed in an area. During times of little or no sunlight, a sensor controls the intensity of the artificial lamps to maintain a desired illumination level. Unlike conventional electric lamps, the natural light produces little to no waste heat and is cool to the touch. This is because the system's solar collector removes the infrared light-the part of the spectrum that generates a lot of the heat in conventional bulbs-from the sunlight.

  15. Potential for the Use of Energy Savings Performance Contracts to Reduce Energy Consumption and Provide Energy and Cost Savings in Non-Building Applications

    Office of Energy Efficiency and Renewable Energy (EERE)

    Document provides information on the use of energy savings performance contracts to reduce energy consumption and provide energy and cost savings in non-building applications.

  16. Energy Department Announces New Investment to Reduce Fuel Cell Costs

    Broader source: Energy.gov [DOE]

    In support of the Obama Administration's all-of-the-above strategy to develop clean, domestic energy sources, the Energy Department today announced a $4.5 million investment in two projects—led by...

  17. Air quality/energy management review of production facilities

    SciTech Connect (OSTI)

    Rosenthal, J.W.

    1995-06-01

    This is the only presentation that integrates energy management and air quality. You will learn how to reduce energy operating costs while minimizing air pollution. This presentation is condensed from a full day course focusing on hands-on techniques for conducting an air quality/energy management review of your operation or plant. The stringent (Non-attainment for PM{sub 10}, Ozone and CO) South Coast Air Quality Management District (SCAQMD) of Southern California rules and regulations are applied to the die casting (metals) industry as well as other production processes. Examples and a case study of real energy intensive production facilities will be used. Developing options for air quality improvement with energy cost control are the key goals of the presentation. Also, the review techniques can be used to determine the {open_quotes}maximum potential to emit{close_quotes} as required for the new Federal EPA, Title V requirements. The outline of the one day course is provided to give the overall scope covered during performing an Air Quality/Energy Management Review of a Production Facility.

  18. Energy Department Announces $7 Million to Reduce Non-Hardware Costs of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solar Energy Systems | Department of Energy Million to Reduce Non-Hardware Costs of Solar Energy Systems Energy Department Announces $7 Million to Reduce Non-Hardware Costs of Solar Energy Systems November 15, 2011 - 4:52pm Addthis Washington, D.C. - As part of the U.S. Department of Energy's SunShot Initiative, Energy Secretary Steven Chu today announced up to $7 million to reduce the non-hardware costs of residential and commercial solar energy installations. Made available through the

  19. PPPL Wins Department of Energy Award For Reducing Greenhouse...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (PPPL) has received a federal Sustainability Award for reducing overall greenhouse ... Members of the PPPL staff were among the 20 recipients of the Sustainability Awards in a ...

  20. Geothermal energy production with supercritical fluids

    DOE Patents [OSTI]

    Brown, Donald W.

    2003-12-30

    There has been invented a method for producing geothermal energy using supercritical fluids for creation of the underground reservoir, production of the geothermal energy, and for heat transport. Underground reservoirs are created by pumping a supercritical fluid such as carbon dioxide into a formation to fracture the rock. Once the reservoir is formed, the same supercritical fluid is allowed to heat up and expand, then is pumped out of the reservoir to transfer the heat to a surface power generating plant or other application.

  1. Energy- and Cost-Savings Calculators for Energy-Efficient Products |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Efficient Products » Energy- and Cost-Savings Calculators for Energy-Efficient Products Energy- and Cost-Savings Calculators for Energy-Efficient Products Estimate energy and cost savings for energy- and water-efficient product categories using these interactive calculators provided by the Federal Energy Management Program or ENERGY STAR. Commercial Heating and Cooling Air-Cooled Chillers Boilers Commercial Heat Pumps Commercial Rooftop Air Conditioners Residential

  2. Energy Permitting Wizard Helps Reduce Project Barriers in Hawai'i |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Permitting Wizard Helps Reduce Project Barriers in Hawai'i Energy Permitting Wizard Helps Reduce Project Barriers in Hawai'i To address the complex permitting process for renewable energy projects in many jurisdictions across the Hawai'ian Islands, the Hawai'i Clean Energy Initiative and its partners developed the Renewable Energy Permitting Wizard. The tool helps utilities, developers, and policymakers meet Hawai'i's renewable energy goals by simplifying and expediting

  3. How the Smart Grid Helps Homeowners Reduce Their Energy Use | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy How the Smart Grid Helps Homeowners Reduce Their Energy Use How the Smart Grid Helps Homeowners Reduce Their Energy Use Addthis 1 of 7 Deputy Secretary of Energy Daniel Poneman explores the new home energy monitor at the Center for Commercialization of Electric Technologies (CCET) Discovery Center's Model Home. He is joined by Kenny Mercado, CenterPoint Energy Houston Electric's Division Senior Vice President, Regulated Operations Technology; Dr. Milton Holloway, President of CCET;

  4. Reducing Congestion through Smart Parking Management | Open Energy...

    Open Energy Info (EERE)

    Efficiency ToolSet Institute for Transportation & Development Policy Production Costs of Alternative Transportation Fuels ... further results Find Another Tool FIND TRANSPORTATION...

  5. Reducing Electricity Use and Costs | Department of Energy

    Energy Savers [EERE]

    Electricity & Fuel » Buying & Making Electricity » Planning for Home Renewable Energy Systems Planning for Home Renewable Energy Systems Planning for a home renewable energy system is a process that includes analyzing your existing electricity use, looking at local codes and requirements, deciding if you want to operate your system on or off of the electric grid, and understanding technology options you have for your site. | Photo by Francis Fine Art Photography. Planning for a home

  6. Reducing the Cost of Energy in Northwest Alaska

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    impacts every aspect of economic life. * Families are choosing between food and fuel. * ... Working on Solutions * Strategic Energy Plan * Strong partnerships * Vision Percentage of ...

  7. CONNECTICUT CHALLENGES TOWNS TO REDUCE ENERGY USE | Department...

    Energy Savers [EERE]

    With both the household use and cost of electricity increasing and an abundance of older homes, Connecticut's market was ripe for residential energy efficiency upgrades. Through a ...

  8. The potential for reducing energy utilization in the refining industry

    SciTech Connect (OSTI)

    Petrick, M.; Pellegrino, J.

    1999-10-08

    The paper first discusses energy use in petroleum refineries and CO{sub 2} emissions because of the fuels used. Then the paper looks at near-, mid-, and long-term opportunities for energy reduction. Some of the options are catalysts, cooling water recycling, steam system efficiency, and the use of coke and petroleum residues.

  9. EECBG Success Story: Reducing Energy Costs and Rebuilding the Past

    Broader source: Energy.gov [DOE]

    In 1969, the Franklin County Courthouse in Union, Missouri was destroyed by a bomb. Thanks to an Energy Efficiency and Conservation Block Grant, the town was able to install an energy-efficient HVAC system, which will allow this historic building to operate efficiently. Learn more.

  10. Project Profile: Reducing the Cost of Thermal Energy Storage for Parabolic

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Trough Solar Power Plants | Department of Energy Concentrating Solar Power » Project Profile: Reducing the Cost of Thermal Energy Storage for Parabolic Trough Solar Power Plants Project Profile: Reducing the Cost of Thermal Energy Storage for Parabolic Trough Solar Power Plants Abengoa logo Abengoa, under the Thermal Storage FOA, is looking at innovative ways to reduce thermal energy storage (TES) system costs. Approach Graphic of a large red cylinder to the right of many small red

  11. Working with Alaska to Reduce Energy Use and #ActOnClimate | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Alaska to Reduce Energy Use and #ActOnClimate Working with Alaska to Reduce Energy Use and #ActOnClimate December 21, 2015 - 4:35pm Addthis New Energy Department competition to help rural Alaskan communities save energy and fight climate change. | Graphic by <a href="/node/1332956">Carly Wilkins</a>, Energy Department New Energy Department competition to help rural Alaskan communities save energy and fight climate change. | Graphic by Carly Wilkins, Energy

  12. Oil: Crude and Petroleum Products - Energy Explained, Your Guide To

    U.S. Energy Information Administration (EIA) Indexed Site

    Understanding Energy - Energy Information Administration Products Energy Explained - Home What Is Energy? Forms of Energy Sources of Energy Laws of Energy Units and Calculators Energy Conversion Calculators British Thermal Units (Btu) Degree-Days U.S. Energy Facts State and U.S. Territory Data Use of Energy In Industry For Transportation In Homes In Commercial Buildings Efficiency and Conservation Energy and the Environment Greenhouse Gases Effect on the Climate Where Greenhouse Gases Come

  13. Peer Review of the Federal Energy Management Program Energy-Efficient Product Procurement Portfolio

    Broader source: Energy.gov [DOE]

    Document details the peer review of the Federal Energy Management Program Energy-Efficient Product Procurement portfolio.

  14. New Jersey: Reducing Energy Bills for Camden's Families | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    accomplishments" by DOE in 2000, and "Best New Home Product" by This Old House Magazine in 2001. In 2001, DOE's Weatherization Assistance Program served as a test bed for...

  15. Osmotic Heat Engine for Energy Production from Low Temperature Geothemal

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Resources | Department of Energy Osmotic Heat Engine for Energy Production from Low Temperature Geothemal Resources Osmotic Heat Engine for Energy Production from Low Temperature Geothemal Resources Osmotic Heat Engine for Energy Production from Low Temperature Geothemal Resources presentation at the April 2013 peer review meeting held in Denver, Colorado. osmotic_heat_engine_low_temp_peer2013.pdf (706.39 KB) More Documents & Publications Osmotic Heat Engine for Energy Production from

  16. Water Heating Products and Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Water Heating Products and Services Water Heating Products and Services Choosing an efficient water heater will help you save money and Energy. | Photo Credit Energy Department Choosing an efficient water heater will help you save money and Energy. | Photo Credit Energy Department Use the following links to get product information and locate professional services for water heating. Product Information Solar Pool Heating Systems Florida Solar Energy Center Listing of solar pool heating systems

  17. Method to Reduce Neutron Production in Small Clean Fusion Reactors Inventor

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    --- Samuel A. Cohen | Princeton Plasma Physics Lab Method to Reduce Neutron Production in Small Clean Fusion Reactors Inventor --- Samuel A. Cohen This invention describes a method to reduce neutron production of D-3He-fueled, steady state, small FRC fusion reactors using periodic, co-streaming, energetic ion beams generated by RF. Use of this method will lessen damage to and activation of reactor components and, in doing so, can advance the development of fusion reactors for electrical

  18. Data on production and use of DRI: World and U. S. [Direct Reduced Iron

    SciTech Connect (OSTI)

    Jensen, H.B.

    1993-01-01

    This paper will present data on the production and use direct-reduced iron (DRI) worldwide, focusing primarily on its use in the United States. The author is indebted to the Midrex Corporation for the data on world production of DRI. The U.S. data is his own and he will explain later how it was collected. He uses the term DRI to include all forms of direct-reduced iron, whether briquettes, pellets or lump.

  19. PPPL wins Department of Energy award for reducing greenhouse...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... National Lab and the National Renewable Energy Lab, to receive the gold award. Contact Info PPPL Office of Communications Email: PPPLOOC@pppl.gov Phone: 609-243-2755 Download ...

  20. Reduce Risk, Increase Clean Energy: How States and Cities are...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... We can create a new asset class that would enable the sector to access low-cost ... the P3 is to realize public sector energy savings by installing solar panels on public buildings. ...

  1. Energy Permitting Wizard Helps Reduce Project Barriers in Hawai...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hawai'i Establishes Goal of Achieving 70% Clean Energy by 2030 The rooftop solar PV on Hawai'i's Mauna Lani Bay Hotel generates 75 kW of electricity. Photo from SunPower, NREL ...

  2. DOE Announces $27 Million to Reduce Costs of Solar Energy Projects,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Streamline Permitting and Installations | Department of Energy 7 Million to Reduce Costs of Solar Energy Projects, Streamline Permitting and Installations DOE Announces $27 Million to Reduce Costs of Solar Energy Projects, Streamline Permitting and Installations June 1, 2011 - 12:00am Addthis WASHINGTON, DC - As part of the Obama Administration's SunShot Initiative to make solar energy cost-competitive with fossil fuels within the decade, U.S. Department of Energy Secretary Steven Chu today

  3. Steam Pressure-Reducing Station Safety and Energy Efficiency Improvement Project

    SciTech Connect (OSTI)

    Lower, Mark D; Christopher, Timothy W; Oland, C Barry

    2011-06-01

    The Facilities and Operations (F&O) Directorate is sponsoring a continuous process improvement (CPI) program. Its purpose is to stimulate, promote, and sustain a culture of improvement throughout all levels of the organization. The CPI program ensures that a scientific and repeatable process exists for improving the delivery of F&O products and services in support of Oak Ridge National Laboratory (ORNL) Management Systems. Strategic objectives of the CPI program include achieving excellence in laboratory operations in the areas of safety, health, and the environment. Identifying and promoting opportunities for achieving the following critical outcomes are important business goals of the CPI program: improved safety performance; process focused on consumer needs; modern and secure campus; flexibility to respond to changing laboratory needs; bench strength for the future; and elimination of legacy issues. The Steam Pressure-Reducing Station (SPRS) Safety and Energy Efficiency Improvement Project, which is under the CPI program, focuses on maintaining and upgrading SPRSs that are part of the ORNL steam distribution network. This steam pipe network transports steam produced at the ORNL steam plant to many buildings in the main campus site. The SPRS Safety and Energy Efficiency Improvement Project promotes excellence in laboratory operations by (1) improving personnel safety, (2) decreasing fuel consumption through improved steam system energy efficiency, and (3) achieving compliance with applicable worker health and safety requirements. The SPRS Safety and Energy Efficiency Improvement Project being performed by F&O is helping ORNL improve both energy efficiency and worker safety by modifying, maintaining, and repairing SPRSs. Since work began in 2006, numerous energy-wasting steam leaks have been eliminated, heat losses from uninsulated steam pipe surfaces have been reduced, and deficient pressure retaining components have been replaced. These improvements helped ORNL

  4. Novel Tool Allows Quicker, More Versatile Analysis of Energy Production

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technologies | Department of Energy Novel Tool Allows Quicker, More Versatile Analysis of Energy Production Technologies Novel Tool Allows Quicker, More Versatile Analysis of Energy Production Technologies June 19, 2012 - 1:00pm Addthis Washington, DC - A new energy production technology analysis tool that could lead to cost-effective improvements for energy generation and lower costs for consumers is now available on the National Energy Technology Laboratory (NETL) website. Available at no

  5. Retrofitting Inefficient Rooftop Air-Conditioning Units Reduces U.S. Navy Energy Use (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-04-01

    As part of the U.S. Navy's overall energy strategy, the National Renewable Energy Laboratory (NREL) partnered with the Naval Facilities Engineering Command (NAVFAC) to demonstrate market-ready energy efficiency measures, renewable energy generation, and energy systems integration. One such technology - retrofitting rooftop air-conditioning units with an advanced rooftop control system - was identified as a promising source for reducing energy use and costs, and can contribute to increasing energy security.

  6. Zero Net Energy Homes Production Builder Business Case: California...

    Broader source: Energy.gov (indexed) [DOE]

    This Top Innovation profile describes four California home builders who worked with ... Zero Net Energy Homes Production Builder Business Case: CaliforniaFlorida Production ...

  7. Energy Department Invests $20 Million to Advance Hydrogen Production...

    Energy Savers [EERE]

    20 Million to Advance Hydrogen Production and Delivery Technologies Energy Department Invests 20 Million to Advance Hydrogen Production and Delivery Technologies June 16, 2014 - ...

  8. Energy Department Invests $20 Million to Advance Hydrogen Production...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department Invests 20 Million to Advance Hydrogen Production and Delivery Technologies Energy Department Invests 20 Million to Advance Hydrogen Production and Delivery...

  9. U.S. Energy Production Through the Years | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Production Through the Years U.S. Energy Production Through the Years December 10, 2014 - 1:00pm Addthis US Energy Production Through the Years Click on each state to learn more about how much energy it produces Pick an energy source Total Energy Produced Coal Crude Oil Natural Gas Total Renewable Energy Non-Biofuel Renewable Energy Biofuels Nuclear Power Source: EIA State Energy Data Systems Daniel Wood Daniel Wood Data Visualization and Cartographic Specialist, Office of Public Affairs

  10. How the Smart Grid Helps Homeowners Reduce Their Energy Use | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy the Smart Grid Helps Homeowners Reduce Their Energy Use How the Smart Grid Helps Homeowners Reduce Their Energy Use August 9, 2011 - 11:09am Addthis Deputy Secretary Daniel Poneman sees firsthand how new in-home monitors help consumers save money. <a href = "http://energy.gov/photos/how-smart-grid-helps-homeowners-reduce-their-energy-use">Click here to see more photos</a> and learn how new smart grid technology can help you save. | Energy Department Image | Photo

  11. Reduce Risk, Increase Clean Energy: How States and Cities are Using Old

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Finance Tools to Scale Up a New Industry | Department of Energy Reduce Risk, Increase Clean Energy: How States and Cities are Using Old Finance Tools to Scale Up a New Industry Reduce Risk, Increase Clean Energy: How States and Cities are Using Old Finance Tools to Scale Up a New Industry Provides a overview of finance tools available to scale-up to clean energy. Author: Clean Energy and Bond Finance Initiative (CE+BFI) Reduce Risk, Increase Clean Energy (3.97 MB) More Documents &

  12. Energy- and Water-Efficient Product Efficiency Programs | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Program (FEMP) and the U.S. Environmental Protection Agency (EPA) established four programs that specify products as energy- or water-efficient. ENERGY STAR FEMP Designated FEMP ...

  13. Production Wells At Lightning Dock Geothermal Area (Cyrq Energy...

    Open Energy Info (EERE)

    Cyrq Energy, 2014) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Production Wells At Lightning Dock Geothermal Area (Cyrq Energy, 2014)...

  14. Large Higgs energy region in Higgs associated top pair production...

    Office of Scientific and Technical Information (OSTI)

    Large Higgs energy region in Higgs associated top pair production at the Linear Collider Citation Details In-Document Search Title: Large Higgs energy region in Higgs associated ...

  15. Energy Conservation Program for Consumer Products: Decision and...

    Office of Environmental Management (EM)

    Products: Decision and Order Granting a Waiver to Whirlpool from the Department of Energy Residential Clothes Washer Test Procedure Energy Conservation Program for Consumer ...

  16. Midwest Biodiesel Products | Open Energy Information

    Open Energy Info (EERE)

    Products Jump to: navigation, search Name: Midwest Biodiesel Products Place: Caseyville, Illinois Zip: 62232 Product: Midwest Biodiesel Products, Inc. is an Illinois based...

  17. 2016-03-11 Energy Conservation Program for Consumer Products:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Representative Average Unit Costs of Energy | Department of Energy -03-11 Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy 2016-03-11 Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy Representative Average Unit Costs of Energy (856.9 KB) More Documents & Publications CX-014551: Categorical Exclusion Determination EA-0819: Finding of No Significant Impact 2016-03-11 Commercial Packaged Boilers_NOPR

  18. Energy Department Awards Nearly $7 Million for Research to Reduce Costs of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electric Vehicle Chargers | Department of Energy Nearly $7 Million for Research to Reduce Costs of Electric Vehicle Chargers Energy Department Awards Nearly $7 Million for Research to Reduce Costs of Electric Vehicle Chargers December 21, 2011 - 12:49pm Addthis As part of the Obama Administration's commitment to reduce America's dependence on oil through advanced vehicle technologies, U.S. Energy Secretary Steven Chu today announced awards totaling nearly $7 million in research and

  19. Products and Services for Energy Efficient Homes | Department...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The resources here will help you find energy-saving and renewable energy products and services. Explore products and services from the following topic areas to find ways to save ...

  20. Assessment of Energy Production Potential from Tidal Streams...

    Broader source: Energy.gov (indexed) [DOE]

    Assessment of Energy Production Potential from Tidal Streams in the United States Final ... Award Number: DE-FG36-08GO18174 Project Title: Assessment of Energy Production Potential ...

  1. Reduce Your Heating Bills with Better Insulation | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    (Engineering) Co-PI: Corinne Lehr, Ph.D. (Chemistry) This presentation does not contain any proprietary, confidential, or otherwise restricted information DOE Bioenergy Technologies Office (BETO) 2015 Project Peer Review Recycling of Nutrients and Water in Algal Biofuels Production Civil and Environmental Engineering California Polytechnic State University San Luis Obispo, California MicroBio Engineering, Inc. San Luis Obispo, California Goal Statement * Improve the sustainability of algae

  2. Energy Permitting Wizard Helps Reduce Project Barriers in Hawaii

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... a long-term vision for energy transformation and are successfully implementing ... 2. Permit application templates (e.g., digital and Web-based) 3. Reduce level of ...

  3. FEMP Releases 10 Updated Covered Product Categories | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    10 Updated Covered Product Categories FEMP Releases 10 Updated Covered Product Categories March 11, 2015 - 4:17pm Addthis Federal agencies are required by five legal authorities, the Energy Security and Independence Act of 2007, the Energy Policy Act of 2005, Federal Acquisition Regulations, Executive Order (E.O.) 13423, and E.O. 13221, to use energy-efficient products. By procuring and properly installing efficient products, agencies can meet their requirements, lower energy and water

  4. Osmotic Heat Engine for Energy Production from Low Temperature Geothermal

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Resources | Department of Energy Osmotic Heat Engine for Energy Production from Low Temperature Geothermal Resources Osmotic Heat Engine for Energy Production from Low Temperature Geothermal Resources Project objective: to demonstrate the economic viability of an Osmotic Heat Engine for electricity production from extremely low-grade geothermal resources. low_mcginnis_osmotic_heat_engine.pdf (327.23 KB) More Documents & Publications Osmotic Heat Engine for Energy Production from Low

  5. ARM - PI Product - Convective Available Potential Energy (CAPE), Convective

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Inhibition (CIN) Product Products Convective Available Potential Energy (CAPE), Convective Inhibition (CIN) Product ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send PI Product : Convective Available Potential Energy (CAPE), Convective Inhibition (CIN) Product ARM soundings are used to determine Convective Available Potential Energy (CAPE), Convective Inhibition (CIN) and associated properties. Data Details

  6. Window, Door, and Skylight Products and Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Window, Door, and Skylight Products and Services Window, Door, and Skylight Products and Services Window, Door, and Skylight Products and Services Use the following links to get product information and locate professional services for windows, doors, and skylights. Product Information Awnings in Residential Buildings: The Impact on Energy Use and Peak Demand University of Minnesota Center for Sustainable Building Research Independently Tested and Certified Energy Performance ENERGY STAR®

  7. Potential for the Use of Energy Savings Performance Contracts to Reduce Energy Consumption and Provide Energy and Cost Savings in Non-Building Applications

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for the Use of Energy Savings Performance Contracts to Reduce Energy Consumption and Provide Energy and Cost Savings in Non-Building Applications A Joint Study by the United States Secretaries of Energy and Defense Authorized in the Energy Independence and Security Act 2007 by Congress Prepared by US Department of Energy Office of Energy Efficiency and Renewable Energy, Federal Energy Management Program For questions and comments please contact: Schuyler Schell Federal Energy Management Program

  8. Assessment of Energy Production Potential from Ocean Currents along the

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    United States Coastline | Department of Energy Energy Production Potential from Ocean Currents along the United States Coastline Assessment of Energy Production Potential from Ocean Currents along the United States Coastline Report summarizing the results of seven years of numerical model simulations of ocean currents in the United States and the database created with that data. energy_production_ocean_currents_us.pdf (4.24 MB) More Documents & Publications Assessment of Energy

  9. A Path to Reduce Methane Emissions from Gas Systems | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A Path to Reduce Methane Emissions from Gas Systems A Path to Reduce Methane Emissions from Gas Systems July 29, 2014 - 3:33pm Addthis A researcher evaluates methane produced in a unique conservation process. Methane is both a potent greenhouse gas and valuable energy resource.| Photo courtesy of the Energy Department. A researcher evaluates methane produced in a unique conservation process. Methane is both a potent greenhouse gas and valuable energy resource.| Photo courtesy of the Energy

  10. Reducing EnergyPlus Run Time For Code Compliance Tools

    SciTech Connect (OSTI)

    Athalye, Rahul A.; Gowri, Krishnan; Schultz, Robert W.; Glazer, Jason

    2014-09-12

    Integration of the EnergyPlus ™ simulation engine into performance-based code compliance software raises a concern about simulation run time, which impacts timely feedback of compliance results to the user. EnergyPlus annual simulations for proposed and code baseline building models, and mechanical equipment sizing result in simulation run times beyond acceptable limits. This paper presents a study that compares the results of a shortened simulation time period using 4 weeks of hourly weather data (one per quarter), to an annual simulation using full 52 weeks of hourly weather data. Three representative building types based on DOE Prototype Building Models and three climate zones were used for determining the validity of using a shortened simulation run period. Further sensitivity analysis and run time comparisons were made to evaluate the robustness and run time savings of using this approach. The results of this analysis show that the shortened simulation run period provides compliance index calculations within 1% of those predicted using annual simulation results, and typically saves about 75% of simulation run time.

  11. Improved Battery Pack Thermal Management to Reduce Cost and Increase Energy Density: Cooperative Research and Development Final Report, CRADA Number CRD-12-499

    SciTech Connect (OSTI)

    Smith, K.

    2013-10-01

    Under this CRADA NREL will support Creare's project for the Department of Energy entitled 'Improved Battery Pack Thermal Management to Reduce Cost and Increase Energy Density' which involves the development of an air-flow based cooling product that increases energy density, safety, and reliability of hybrid electric vehicle battery packs.

  12. Advanced Solar Products | Open Energy Information

    Open Energy Info (EERE)

    Products Jump to: navigation, search Name: Advanced Solar Products Place: Flemington, New Jersey Zip: 8822 Product: New Jersey-based PV systems installer and project developer....

  13. Mid America Agri Products | Open Energy Information

    Open Energy Info (EERE)

    Products Jump to: navigation, search Name: Mid America Agri Products Place: Madrid, Nebraska Zip: 69150 Product: Ethanol producer located in Madrid, Nebraska. Coordinates:...

  14. Category:Production Wells | Open Energy Information

    Open Energy Info (EERE)

    Wells Jump to: navigation, search Geothermalpower.jpg Looking for the Production Wells page? For detailed information on Production Wells, click here. Category:Production Wells...

  15. EV Solar Products | Open Energy Information

    Open Energy Info (EERE)

    Solar Products Jump to: navigation, search Logo: EV Solar Products Name: EV Solar Products Address: 2655 N. Highway 89 Place: Chino Valley, Arizona Zip: 86323 Sector: Solar...

  16. Monthly Biodiesel Production Report - Energy Information Administratio...

    U.S. Energy Information Administration (EIA) Indexed Site

    Monthly Biodiesel Production Report With Data for April 2016 | Release Date: June 30, 2016 ... Highlights Production - U.S. production of biodiesel was 119 million gallons in April ...

  17. U. S. Energy Information Administration | Drilling Productivity...

    U.S. Energy Information Administration (EIA) Indexed Site

    New-well gas production per rig thousand cubic feetday Niobrara Region Rig count rigs drilling data through May projected production through July June 2016 Drilling Productivity ...

  18. U. S. Energy Information Administration | Drilling Productivity...

    U.S. Energy Information Administration (EIA) Indexed Site

    New-well gas production per rig thousand cubic feetday Utica Region Rig count rigs drilling data through May projected production through July June 2016 Drilling Productivity ...

  19. U. S. Energy Information Administration | Drilling Productivity...

    U.S. Energy Information Administration (EIA) Indexed Site

    New-well gas production per rig thousand cubic feetday Permian Region Rig count rigs drilling data through May projected production through July June 2016 Drilling Productivity ...

  20. U. S. Energy Information Administration | Drilling Productivity...

    U.S. Energy Information Administration (EIA) Indexed Site

    New-well gas production per rig thousand cubic feetday Marcellus Region Rig count rigs drilling data through May projected production through July June 2016 Drilling Productivity ...

  1. U. S. Energy Information Administration | Drilling Productivity...

    U.S. Energy Information Administration (EIA) Indexed Site

    New-well gas production per rig thousand cubic feetday Eagle Ford Region Rig count rigs drilling data through May projected production through July June 2016 Drilling Productivity ...

  2. USDA Forest Products Laboratory | Open Energy Information

    Open Energy Info (EERE)

    Forest Products Laboratory Jump to: navigation, search Name: USDA Forest Products Laboratory Place: Madison, WI Website: www.fpl.fs.fed.us References: USDA Forest Products...

  3. Energy conversion device and method of reducing friction therein

    DOE Patents [OSTI]

    Solovyeva, Lyudmila Mikhaylovna; Jansson, Kyle S; Elmoursi, Alaa AbdelAzim; Zhu, Dong; Milner, Robert; Daughterty, Early Eugene; Higdon, Clifton Baxter; Elagamy, Kamel Abdel-Khalik; Hicks, Aaron Michael

    2013-10-08

    A device configured for converting energy includes a first surface, a second surface configured for moving with respect to the first surface during operation of the device, and a coating disposed on at least one of the first surface and the second surface. The coating includes a first layer of a ceramic alloy represented by the general formula AlMgB.sub.14--X, wherein X is present in an amount of from 0 to 70 parts by weight based on 100 parts by weight of the ceramic alloy and is a doping agent selected from the group of Group IV elements and borides and nitrides thereof, and a second layer disposed on the first layer and including carbon in a gradient concentration. The coating has a hardness of from 10 to 20 GPa and a coefficient of friction of less than or equal to 0.12.

  4. ISSUANCE 2015-02-03: Energy Efficiency Program for Residential Products: Energy Conservation Standards for Miscellaneous Refrigeration Products, Reopening of Public Comment Period

    Broader source: Energy.gov [DOE]

    Energy Efficiency Program for Residential Products: Energy Conservation Standards for Miscellaneous Refrigeration Products, Reopening of Public Comment Period

  5. 2015-04-01 ISSUANCE: Energy Conservation Program for Consumer Products: Energy Conservation Standards for Hearth Products, Notice of Comment Period Extension

    Broader source: Energy.gov [DOE]

    Energy Conservation Program for Consumer Products: Energy Conservation Standards for Hearth Products, Notice of Comment Period Extension

  6. Renewable energy for productive uses in Mexico

    SciTech Connect (OSTI)

    Hanley, C.

    1997-12-01

    This paper describes a USAID/USDOE sponsored program to implement renewable energy in Mexico for productive uses. The objectives are to expand markets for US and Mexican industries, and to combat global climate change - primarily greenhouse gas emissions. The focus is on off-grid applications, with an emphasis on developing the institution structure to support the development of these industries within the country. Agricultural development is an example of the type of industry approached, where photovoltaic and wind power can be used for water pumping. There are hundreds of projects under review, and this interest has put renewables as a line item in Mexico`s rural development budget. Village power projects are being considered in the form of utility partnerships.

  7. Resource Assessment for Hydrogen Production: Hydrogen Production Potential from Fossil and Renewable Energy Resources

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Resource Assessment for Hydrogen Production Hydrogen Production Potential from Fossil and Renewable Energy Resources M. Melaina, M. Penev, and D. Heimiller National Renewable Energy Laboratory Technical Report NREL/TP-5400-55626 September 2013 NREL is a national laboratory of the U.S. Department of Energy Office of Energy Efficiency & Renewable Energy Operated by the Alliance for Sustainable Energy, LLC This report is available at no cost from the National Renewable Energy Laboratory (NREL)

  8. Use of Biostratigraphy to Increase Production, Reduce Operating Costs and Risks and Reduce Environmental Concerns in Oil Well Drilling

    SciTech Connect (OSTI)

    Edward Marks

    2005-09-09

    out at the top of the late Miocene, early Mohnian: Bolivina aff hughesi, Rotalia becki, Suggrunda californica, Virgulina grandis, Virgulina ticensis, Bulimina ecuadorana, Denticula lauta and Nonion medio-costatum. Please see Appendix B, Fig. 1, Neogene Zones, p. 91 and Appendix C, chart 5, p. 99 By the use of Stratigraphy, employing both Paleontology and Lithology, we can increase hydrocarbon production, reduce operating costs and risks by the identification of the productive sections, and reduce environmental concerns by drilling less dry holes needlessly.

  9. A Scanning Auger Microprobe analysis of corrosion products associated with sulfate reducing bacteria

    SciTech Connect (OSTI)

    Sadowski, R.A.; Chen, G.; Clayton, C.R.; Kearns, J.R.; Gillow, J.B.; Francis, A.J.

    1995-03-01

    A Scanning Auger Microprobe analysis was performed on the corrosion products of an austenitic AISI type 304 SS after a potentiostatic polarization of one volt for ten minutes in a modified Postgate`s C media containing sulfate reducing bacteria. The corrosion products were characterized and mapped in local regions where pitting was observed. A critical evaluation of the applicability of this technique for the examination of microbially influenced corrosion (MIC) is presented.

  10. Covered Product Category: Enterprise Servers | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Enterprise Servers Covered Product Category: Enterprise Servers The Federal Energy Management Program (FEMP) provides acquisition guidance for enterprise servers, a product category covered by the ENERGY STAR program. Federal laws and requirements mandate that agencies buy ENERGY STAR-qualified products in all product categories covered by this program and any acquisition actions that are not specifically exempted by law. MEETING EFFICIENCY REQUIREMENTS FOR FEDERAL PURCHASES The U.S.

  11. Covered Product Category: Imaging Equipment | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Imaging Equipment Covered Product Category: Imaging Equipment The Federal Energy Management Program (FEMP) provides acquisition guidance for imaging equipment, a product category covered by the ENERGY STAR program. Federal laws and requirements mandate that agencies buy ENERGY STAR qualified products in all product categories covered by this program and any acquisition actions that are not specifically exempted by law. MEETING EFFICIENCY REQUIREMENTS FOR FEDERAL PURCHASES The U.S. Environmental

  12. Covered Product Category: Room Air Conditioners | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Room Air Conditioners Covered Product Category: Room Air Conditioners The Federal Energy Management Program (FEMP) provides acquisition guidance for room air conditioners, a product category covered by the ENERGY STAR program. Federal laws and requirements mandate that agencies purchase ENERGY STAR-qualified products in all product categories covered by this program and any acquisition actions that are not specifically exempted by law. MEETING EFFICIENCY REQUIREMENTS FOR FEDERAL PURCHASES The

  13. Geothermal Energy Production with Co-produced and Geopressured Resources

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (Fact Sheet), Geothermal Technologies Program (GTP) | Department of Energy Energy Production with Co-produced and Geopressured Resources (Fact Sheet), Geothermal Technologies Program (GTP) Geothermal Energy Production with Co-produced and Geopressured Resources (Fact Sheet), Geothermal Technologies Program (GTP) This fact sheet provides an overview of geothermal energy production using co-produced and geopressured resources. low_temp_copro_fs.pdf (587.5 KB) More Documents & Publications

  14. EERE Success Story-New Jersey: Reducing Energy Bills for Camden's

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Families | Department of Energy Reducing Energy Bills for Camden's Families EERE Success Story-New Jersey: Reducing Energy Bills for Camden's Families April 25, 2013 - 12:58pm Addthis The Northgate II, a 308-unit apartment building, was treated with Aeroseal, thanks to a grant from New Jersey's Multifamily Weatherization Assistance Program. Aeroseal, developed at DOE's Lawrence Berkeley National Laboratory by Dr. Mark Modera, uses airborne adhesive particles to seal leaky air ducts. The

  15. The Department of Energy's Request for Information on Reducing Regulatory Burden

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy's Request for Information on Reducing Regulatory Burden Submitted on June 18, 2012 On behalf of the Natural Resources Defense Council and our more than 1.3 million members and online activists, we submit the following comments in response to the Department of Energy's (DOE) Request for Information on Reducing Regulatory Burden. (77 Federal Register 28518, May 15, 2012) NRDC has spent decades working to build and improve the Department of Energy's ("DOE") federal

  16. U.S. Energy Requirements for Aluminum Production | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Requirements for Aluminum Production U.S. Energy Requirements for Aluminum Production Historical Perspective, Theoretical Limits, and Current Practices. U.S. Energy Requirements for Aluminum Production (February 2007) (3.04 MB) More Documents & Publications Ultrahigh-Efficiency Aluminum Production Cells ITP Aluminum: Aluminum Industry Technology Roadmap ITP Aluminum: Aluminum Industry Vision: Sustainable Solutions for a Dynamic World

  17. Hydrogen Production Fact Sheet | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fact Sheet Hydrogen Production Fact Sheet Fact sheet produced by the Fuel Cell Technologies Office describing hydrogen production. Hydrogen Production (1.69 MB) More Documents & Publications Hydrogen Production Technical Team Roadmap US DRIVE Hydrogen Production Technical Team Roadmap H2 Educate Student Guide

  18. LED Color-Tunable Products | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Research & Development » Technology Application R&D » CALiPER Testing » Application Reports » LED Color-Tunable Products LED Color-Tunable Products UNDERSTANDING, LED Color-Tunable Products SPECIFYING, LED Color-Tunable Products CONTROLLING, LED Color-Tunable Products TESTING, LED Color-Tunable Products Color-tunable LED luminaires are a nascent and growing product category. Beyond the inherent energy efficiency of LEDs, these luminaires offer other potential benefits including

  19. Building and Home Design Products and Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Home Design Products and Services Building and Home Design Products and Services Production builder Centex Homes built ultra-efficient model homes in San Ramon, California.’s Aventura and Lunaria community developments. Credit: Davis Energy Group. Production builder Centex Homes built ultra-efficient model homes in San Ramon, California.'s Aventura and Lunaria community developments. Credit: Davis Energy Group. Here you'll find a list of products and services for buyers and builders of

  20. Minnesota Company 3M Awarded $3 Million by Energy Department to Reduce Cost

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Advanced Fuel Cells | Department of Energy Minnesota Company 3M Awarded $3 Million by Energy Department to Reduce Cost of Advanced Fuel Cells Minnesota Company 3M Awarded $3 Million by Energy Department to Reduce Cost of Advanced Fuel Cells March 29, 2012 - 4:20pm Addthis In support of the Obama Administration's all-of-the-above approach to American energy, the Energy Department today announced the investment of $3 million to 3M Company in St. Paul, Minnesota, to lower the cost of

  1. Coal flow aids reduce coke plant operating costs and improve production rates

    SciTech Connect (OSTI)

    Bedard, R.A.; Bradacs, D.J.; Kluck, R.W.; Roe, D.C.; Ventresca, B.P.

    2005-06-01

    Chemical coal flow aids can provide many benefits to coke plants, including improved production rates, reduced maintenance and lower cleaning costs. This article discusses the mechanisms by which coal flow aids function and analyzes several successful case histories. 2 refs., 10 figs., 1 tab.

  2. RegReview_ReplyComments_Lennox_Hearth_Products.PDF | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    RegReview_ReplyComments_Lennox_Hearth_Products.PDF RegReview_ReplyComments_Lennox_Hearth_Products.PDF (56.61 KB) More Documents & Publications Re: Regulatory Burden RFI Department of Energy Request for Information: Reducing Regulatory Burden (Reply Comments) .Hearth, Patio & Barbecue Association's Comments on DOE's Regulatory Burden RFI

  3. Energy Conservation Program for Consumer Products: Decision and Order

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Granting a Waiver to Whirlpool from the Department of Energy Residential Clothes Washer Test Procedure | Department of Energy Program for Consumer Products: Decision and Order Granting a Waiver to Whirlpool from the Department of Energy Residential Clothes Washer Test Procedure Energy Conservation Program for Consumer Products: Decision and Order Granting a Waiver to Whirlpool from the Department of Energy Residential Clothes Washer Test Procedure Clothes Washer Test Procedure: Decision and

  4. Large Scale Production Computing and Storage Requirements for Fusion Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sciences: Target 2017 Large Scale Production Computing and Storage Requirements for Fusion Energy Sciences: Target 2017 The NERSC Program Requirements Review "Large Scale Production Computing and Storage Requirements for Fusion Energy Sciences" is organized by the Department of Energy's Office of Fusion Energy Sciences (FES), Office of Advanced Scientific Computing Research (ASCR), and the National Energy Research Scientific Computing Center (NERSC). The review's goal is to

  5. Axion Battery Products Inc | Open Energy Information

    Open Energy Info (EERE)

    Axion Battery Products Inc Jump to: navigation, search Name: Axion Battery Products Inc Place: Woodbridge, Ontario, Canada Zip: L4L 5Y9 Product: Subsidiary of Axion Power...

  6. Genetic manipulation of lignin reduces recalcitrance and improves biomass ethanol production from switchgrass

    SciTech Connect (OSTI)

    Hamilton, Choo Yieng; Fu, Chunxiang; Xiao, Xirong; Ge, Yaxin; Chen, Fang; Bouton, Joseph; Foston, Marcus; Dixon, Richard A; Wang, Zeng-Yu; Mielenz, Jonathan R

    2011-01-01

    Switchgrass is a leading dedicated bioenergy feedstock because it is a native, high yielding, perennial prairie grass with broad cultivation range and low agronomic input requirements. Biomass conversion research has developed pilot scale processes for production of ethanol and other alcohols but they remain costly primarily due to the intrinsic recalcitrance of biomass. We show here that switchgrass genetic modification can produce normal plants that have reduced thermochemical and enzymatic recalcitrance. Downregulation of the switchgrass caffeic O-methyltransferase gene decreases lignin content modestly, reduces the syringyl to guaiacyl lignin monomer ratio and increases the ethanol yield by up to a third using conventional biomass fermentation processes. The downregulated lines have wild-type biomass yields but require reduced pretreatment severity and 300-400% lower cellulase dosages for equivalent product yields significantly lowering processing costs. Alternately, our modified transgenic switchgrass lines should yield significantly more fermentation chemicals per hectare under identical process conditions.

  7. Missouri Bio Products | Open Energy Information

    Open Energy Info (EERE)

    to: navigation, search Name: Missouri Bio-Products Place: Bethel, Missouri Product: Biodiesel producer that operates a 7.5mLpa plant in Bethel, Missouri. Coordinates:...

  8. Tradewinds Forest Products | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name: Tradewinds Forest Products Place: Hawaii Product: Firm developing a cogeneration plant for a sugar mill in Hawaii. References: Tradewinds...

  9. Tecumseh Products Company | Open Energy Information

    Open Energy Info (EERE)

    Manufacturer of hermetic compressors for air conditioning and refrigeration products, gasoline engines and power train components. References: Tecumseh Products Company1 This...

  10. Air Products Chemicals Inc | Open Energy Information

    Open Energy Info (EERE)

    Air Products & Chemicals Inc Place: Allentown, Pennsylvania Zip: 18195 Sector: Hydro, Hydrogen, Services Product: A global supplier of merchant hydrogen with a portfolio of...

  11. Alten Products Company | Open Energy Information

    Open Energy Info (EERE)

    Alten Product Company Name: Alten Product Company Address: 2423 Old Middlefield Way Suite J Place: Mountain View, California Country: United States Zip: 94043-2348 Region: Bay Area...

  12. Fitcraft Production sro | Open Energy Information

    Open Energy Info (EERE)

    Republic Zip: 74101 Sector: Solar Product: Czech manufacturer of silicon wafers, PV c-Si modules and solar street lights. References: Fitcraft Production sro1 This article is...

  13. Heartland Corn Products | Open Energy Information

    Open Energy Info (EERE)

    55396 Product: Heartland Corn Products is farmer-owned cooperative that produces corn-derived ethanol. Coordinates: 48.47373, -120.177559 Show Map Loading map......

  14. U. S. Energy Information Administration | Drilling Productivity...

    U.S. Energy Information Administration (EIA) Indexed Site

    New-well gas production per rig thousand cubic feetday Haynesville Region Rig count rigs drilling data through May projected production through July June 2016 Drilling ...

  15. Hydrogen Production Basics | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Hydrogen is an energy carrier, not an energy source-it stores and delivers energy in a usable form, but it must be produced from hydrogen containing compounds. Diverse and Domestic ...

  16. Chronological History of Federal Energy-Efficient Product Procurement:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Executive, Legislative and Regulatory Requirements, Actions and Mandates | Department of Energy Chronological History of Federal Energy-Efficient Product Procurement: Executive, Legislative and Regulatory Requirements, Actions and Mandates Chronological History of Federal Energy-Efficient Product Procurement: Executive, Legislative and Regulatory Requirements, Actions and Mandates Document provides a chronological history of the legislative actions and executive orders that contribute to the

  17. Category:Production Incentives | Open Energy Information

    Open Energy Info (EERE)

    Incentive Program (South Carolina) Progress Energy Carolinas - SunSense Commercial Solar Water Heating Incentive Program (North Carolina) Progress Energy Carolinas - SunSense...

  18. Institute a modest carbon tax to reduce carbon emissions, finance clean energy technology development, cut taxes, and reduce the deficit

    SciTech Connect (OSTI)

    Muro, Mark; Rothwell, Jonathan

    2012-11-15

    The nation should institute a modest carbon tax in order to help clean up the economy and stabilize the nation’s finances. Specifically, Congress and the president should implement a $20 per ton, steadily increasing carbon excise fee that would discourage carbon dioxide emissions while shifting taxation onto pollution, financing energy efficiency (EE) and clean technology development, and providing opportunities to cut taxes or reduce the deficit. The net effect of these policies would be to curb harmful carbon emissions, improve the nation’s balance sheet, and stimulate job-creation and economic renewal.

  19. Department of Energy Awards up to $38 Million to Advance Technology and Reduce Cost of Geothermal Energy

    Broader source: Energy.gov [DOE]

    U.S. Energy Secretary Steven Chu today announced $38 million over three years for projects to accelerate the development of promising geothermal energy technologies and help diversify America's sources of clean, renewable energy. Thirty-two innovative projects in 14 states will develop and test new ways to locate geothermal resources and improve resource characterization, drilling, and reservoir engineering techniques, which will enable geothermal energy sources to help reduce the nation's reliance on fossil fuels.

  20. ISSUANCE 2015-05-12: Energy Conservation Program for Consumer Products: Energy Conservation Standards for Residential Furnaces

    Broader source: Energy.gov [DOE]

    Energy Conservation Program for Consumer Products: Energy Conservation Standards for Residential Furnaces, Extension of Comment Period

  1. ISSUANCE 2015-05-12: Energy Conservation Program for Consumer Products: Energy Conservation Standards for Residential Boilers

    Broader source: Energy.gov [DOE]

    Energy Conservation Program for Consumer Products: Energy Conservation Standards for Residential Boilers Comment Period Extension.

  2. Reduce Risk, Increase Clean Energy: How States and Cities are Using Old Finance Tools

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reduce Risk, Increase Clean Energy: How States and Cities are Using Old Finance Tools to Scale Up a New Industry August 2013 Report Prepared for the Clean Energy and Bond Finance Initiative (CE+BFI) A Joint Project of Clean Energy Group and the Council of Development Finance Agencies Robert G. Sanders Lewis Milford Toby Rittner Clean Energy Group (CEG) CEG is a leading national, nonprofit advocacy organization working on innovative technology, finance, and policy programs in the areas of clean

  3. Short-Term Energy Outlook Supplement: Energy-weighted industrial production indices

    Gasoline and Diesel Fuel Update (EIA)

    Energy-weighted industrial production indices December 2013 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 U.S. Energy Information Administration | Short-Term Energy Outlook Supplement: Energy-weighted industrial production indices i This report was prepared by the U.S. Energy Information Administration (EIA), the statistical and analytical agency within the U.S. Department of Energy. By law, EIA's data, analyses, and forecasts are independent of

  4. Central Versus Distributed Hydrogen Production | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hydrogen Production » Central Versus Distributed Hydrogen Production Central Versus Distributed Hydrogen Production Central, semi-central, and distributed production facilities are expected to play a role in the evolution and long-term use of hydrogen as an energy carrier. The different resources and processes used to produce hydrogen may be suitable to one or more of these scales of production. Distributed Production Hydrogen can be produced in small units where it is needed, such as vehicle

  5. Energy Department Invests $20 Million to Advance Hydrogen Production and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Delivery Technologies | Department of Energy 20 Million to Advance Hydrogen Production and Delivery Technologies Energy Department Invests $20 Million to Advance Hydrogen Production and Delivery Technologies June 16, 2014 - 1:21pm Addthis The Energy Department today announced $20 million for ten new research and development projects that will advance hydrogen production and delivery technologies. Developing technologies that can economically produce and deliver hydrogen to power fuel cells

  6. Energy Department Invests $20 Million to Advance Hydrogen Production and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Delivery Technologies | Department of Energy $20 Million to Advance Hydrogen Production and Delivery Technologies Energy Department Invests $20 Million to Advance Hydrogen Production and Delivery Technologies June 16, 2014 - 12:47pm Addthis The Energy Department today announced $20 million for 10 new research and development projects that will advance hydrogen production and delivery technologies. Developing technologies that can economically produce and deliver hydrogen to power fuel cells

  7. Department of Energy Offers Vehicle Production Group Nearly $50 Million

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Conditional Loan Commitment | Department of Energy Vehicle Production Group Nearly $50 Million Conditional Loan Commitment Department of Energy Offers Vehicle Production Group Nearly $50 Million Conditional Loan Commitment November 22, 2010 - 12:00am Addthis Washington, D.C. - U.S. Energy Secretary Steven Chu announced today an offer of a nearly $50 million conditional loan commitment to The Vehicle Production Group LLC (VPG). The conditional loan commitment will support the development of

  8. Reducing heat loss from the energy absorber of a solar collector

    DOE Patents [OSTI]

    Chao, Bei Tse; Rabl, Ari

    1976-01-01

    A device is provided for reducing convective heat loss in a cylindrical radiant energy collector. It includes a curved reflective wall in the shape of the arc of a circle positioned on the opposite side of the exit aperture from the reflective side walls of the collector. Radiant energy exiting the exit aperture is directed by the curved wall onto an energy absorber such that the portion of the absorber upon which the energy is directed faces downward to reduce convective heat loss from the absorber.

  9. Suggest a New Product Category | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    If you want to propose a new product category to be designated by the Federal Energy Management Program (FEMP), send the following information to FEMP. The product category you ...

  10. Search for anomalous production of events with a high energy...

    Office of Scientific and Technical Information (OSTI)

    for anomalous production of events with a high energy lepton and photon at the Tevatron Citation Details In-Document Search Title: Search for anomalous production of events with ...

  11. Water Heating Products and Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Water Heating Products and Services Water Heating Products and Services May 29, 2012 - 7:04pm Addthis Choosing an efficient water heater will help you save money and Energy. |...

  12. NREL: Technology Deployment - U.S. Coast Guard Sees Reduced Energy Costs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Usage After NREL's Energy Assessment Training U.S. Coast Guard Sees Reduced Energy Costs and Usage After NREL's Energy Assessment Training A man with a notebook references the machinery and equipment he is standing next to NREL Energy Engineer Jesse Dean provides hands-on energy assessment training at the U.S. Coast Guard Academy in New London, Connecticut. April 25, 2013 As a federal agency, the U.S. Coast Guard is required to comply with the Energy Independence and Security Act of

  13. TEE-0026- In the Matter of Energy Savings Products, Ltd.

    Broader source: Energy.gov [DOE]

    This Decision and Order considers an Application for Exception filed by Energy Savings Products, Ltd. (ESP) seeking exception relief from the provisions of 10 C.F.R.Part 430, pertaining to energy...

  14. ITP Forest Products: Energy and Environmental Profile of the...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy and Environmental Profile of the U.S. Pulp and Paper Industry ITP Forest Products: Energy and Environmental Profile of the U.S. Pulp and Paper Industry PDF icon ...

  15. Institute for Industrial Productivity (IIP) | Open Energy Information

    Open Energy Info (EERE)

    20037-1701 Website: www.iipnetwork.org References: www.iipnetwork.org The Institute for Industrial Productivity provides companies and governments with the best energy efficiency...

  16. General Renewable Energy-Productive Uses and Development Impact...

    Open Energy Info (EERE)

    Impact Jump to: navigation, search Tool Summary LAUNCH TOOL Name: General Renewable Energy-Productive Uses and Development Impact AgencyCompany Organization: World Bank...

  17. Assessment of Energy Production Potential from Ocean Currents...

    Broader source: Energy.gov (indexed) [DOE]

    of ocean currents in the United States and the database created with that data. Assessment of Energy Production Potential from Ocean Currents along the United States Coastline...

  18. Product Standards for Vending Equipment (Japan) | Open Energy...

    Open Energy Info (EERE)

    Vending Equipment (Japan) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Product Standards for Vending Equipment (Japan) Focus Area: Energy Efficiency Topics: Policy...

  19. Production Costs of Alternative Transportation Fuels | Open Energy...

    Open Energy Info (EERE)

    ... further results Find Another Tool FIND TRANSPORTATION TOOLS This study examines the production costs of a range of transport fuels and energy carriers under varying crude oil...

  20. Osmotic Heat Engine for Energy Production from Low Temperature...

    Broader source: Energy.gov (indexed) [DOE]

    Heat Engine for Energy Production from Low Temperature Geothemal Resources presentation at the April 2013 peer review meeting held in Denver, Colorado. PDF icon osmoticheatengine...

  1. Sample Contract Language for Construction Using Energy-Efficient Products

    Broader source: Energy.gov [DOE]

    Document covers sample language that federal agencies can use in contracts specifying or purchasing energy-efficient products in construction projects.

  2. Information for Retailers of Lighting Products | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Retailers of Lighting Products Information for Retailers of Lighting Products Information for Retailers of Lighting Products U.S. retailers who sell lighting products can use the information below to help their customers better understand energy-efficient lighting choices. New information will be added as it becomes available. U.S. retailers are welcome to use parts of these materials in their retail displays. In those cases, please do so without the Department of Energy's name, since we will

  3. NASA Ames Saves Energy and Reduces Project Costs with Non-Invasive Retrofit Technologies

    Broader source: Energy.gov [DOE]

    Presentation—given at the Fall 2011 Federal Utility Partnership Working Group (FUPWG) meeting—covers the NASA Ames Research Center's effort to save energy and reduce project costs with non-invasive retrofit technologies.

  4. Large Scale Production Computing and Storage Requirements for Basic Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sciences: Target 2017 Large Scale Production Computing and Storage Requirements for Basic Energy Sciences: Target 2017 BES-Montage.png This is an invitation-only review organized by the Department of Energy's Office of Basic Energy Sciences (BES), Office of Advanced Scientific Computing Research (ASCR), and the National Energy Research Scientific Computing Center (NERSC). The goal is to determine production high-performance computing, storage, and services that will be needed for BES to

  5. JD Products LLC | Open Energy Information

    Open Energy Info (EERE)

    JD Products LLC Jump to: navigation, search Name: JD Products LLC Sector: Marine and Hydrokinetic Phone Number: 714-767-7553 Website: http: This company is listed in the Marine and...

  6. Hydrogen Production: Electrolysis | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electrolysis Hydrogen Production: Electrolysis Electrolysis is a promising option for hydrogen production from renewable resources. Electrolysis is the process of using electricity to split water into hydrogen and oxygen. This reaction takes place in a unit called an electrolyzer. Electrolyzers can range in size from small, appliance-size equipment that is well-suited for small-scale distributed hydrogen production to large-scale, central production facilities that could be tied directly to

  7. Two ENERGY STAR Products Fail Testing

    Broader source: Energy.gov [DOE]

    DOE testing has identified two additional models of home appliances that do not meet the ENERGY STAR Program’s energy efficiency requirements.  A refrigerator manufactured by the Perlick...

  8. Using electronic templates and a centralized document production network to reduce cost and improve consistence between technical reports

    SciTech Connect (OSTI)

    Byrnes, M.E.

    1996-12-31

    In an effort to reduce the cost and improve the accuracy and consistency between technical reports being written by large companies or large Federal installations, SAIC has recently developed the Centralized Document Production Network (CDPN) Software. The CDPN Software is loaded with standardized electronic document templates along with standardized site-specific background text, tables, and figures. While users across the network are able to retrieve electronic templates and site-specific background text to support their report writing activities, modifications to the network text can only be made by designated experts which are assigned individual passwords. At this time, the CDPN software is being Beta Tested by Kaiser-Hill and Rocky Mountain Remediation Services at the US Department of Energy`s Rocky Flats Plant, in addition to multiple private sector corporations.

  9. Microbial Production of Energy Colloquium- March 10-12, 2006

    SciTech Connect (OSTI)

    Merry Buckley; Judy Wall

    2006-10-01

    The American Academy of Microbiology convened a colloquium March 10-12, 2006, in San Francisco, California, to discuss the production of energy fuels by microbial conversions. The status of research into various microbial energy technologies, the advantages and disadvantages of each of these approaches, research needs in the field, and education and training issues were examined, with the goal of identifying routes for producing biofuels that would both decrease the need for fossil fuels and reduce greenhouse gas emissions. Currently, the choices for providing energy are limited. Policy makers and the research community must begin to pursue a broader array of potential energy technologies. A diverse energy portfolio that includes an assortment of microbial energy choices will allow communities and consumers to select the best energy solution for their own particular needs. Funding agencies and governments alike need to prepare for future energy needs by investing both in the microbial energy technologies that work today and in the untested technologies that will serve the world’s needs tomorrow. More mature bioprocesses, such as ethanol production from starchy materials and methane from waste digestors, will find applications in the short term. However, innovative techniques for liquid fuel or biohydrogen production are among the longer term possibilities that should also be vigorously explored, starting now. Microorganisms can help meet human energy needs in any of a number of ways. In their most obvious role in energy conversion, microorganisms can generate fuels, including ethanol, hydrogen, methane, lipids, and butanol, which can be burned to produce energy. Alternatively, bacteria can be put to use in microbial fuel cells, where they carry out the direct conversion of biomass into electricity. Microorganisms may also be used some day to make oil and natural gas technologies more efficient by sequestering carbon or by assisting in the recovery of oil and

  10. Energy Department Takes Major Steps to Increase U.S. Energy Productivity and Manufacturing

    Broader source: Energy.gov [DOE]

    The Department of Energy today announced expansions of its Clean Energy Manufacturing Initiative in support of the American manufacturing sector and a new initiative to support President Obama’s goal of doubling energy productivity by 2030.

  11. Dow Kokam Lithium Ion Battery Production Facilities | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Petrochemical Plant | Department of Energy describes how Dow Chemical Company saved 272,000 MMBtu and $1.9 million annually after increasing the steam system energy efficiency of a plant in Louisiana. Dow Chemical Company: Assessment Leads to Steam System Energy Savings in a Petrochemical Plant (November 2007) (549.15 KB) More Documents & Publications Terra Nitrogen Company, L.P.: Ammonia Plant Greatly Reduces Natural Gas Consumption After Energy Assessment Chrysler: Save Energy Now

  12. Energy Dept. Reports: U.S. Wind Energy Production and Manufacturing Reaches

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Record Highs | Department of Energy Wind Energy Production and Manufacturing Reaches Record Highs Energy Dept. Reports: U.S. Wind Energy Production and Manufacturing Reaches Record Highs August 6, 2013 - 8:00am Addthis WASHINGTON - The Energy Department released two new reports today showcasing record growth across the U.S. wind market -- increasing America's share of clean, renewable energy and supporting tens of thousands of jobs nationwide. According to these reports, the United States

  13. ENERGY STAR Sales Tax Holiday for Energy-Efficient Products

    Broader source: Energy.gov [DOE]

    Although the eligibility of some products is limited according to their sale price, there are no limitations on the total value or number of products exempt from sales tax.

  14. Hydrogen Production: Photobiological | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Photobiological Hydrogen Production: Photobiological Photo of a woman examining a flask containing green liquid while working in a laboratory. The photobiological hydrogen production process uses microorganisms and sunlight to turn water, and sometimes organic matter, into hydrogen. This is a longer-term technology pathway in the early stages of research that has a long-term potential for sustainable hydrogen production with low environmental impact. How Does it Work? In photolytic biological

  15. Product Performance Guides | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Product Performance Guides Product Performance Guides A working group under the joint auspices of DOE and the Next Generation Lighting Industry Alliance supports the efforts of LED Lighting Facts by developing and publishing guidelines and reports to help deepen our understanding of LED product performance and reliability. These efforts led to the development of the DOE LED Systems Reliability Consortium, a group of industry experts working collaboratively in an ongoing effort to develop an

  16. Production Worker Screening Projects | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Production Worker Screening Projects Production Worker Screening Projects Sites listed below are the primary DOE sites served. Production workers from DOE sites not listed below are covered by the National Supplemental Screening Program (NSSP). Additional information regarding NSSP can be found on their website or by calling 1-866-812-6703. California: Lawrence Berkeley National Laboratory Lawrence Livermore National Laboratory Sandia National Laboratories (Livermore, CA) Colorado: Rocky Flats

  17. Hydrogen Production Pathways | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Pathways Hydrogen Production Pathways Hydrogen Production Pathways DOE is focused on developing technologies that can produce hydrogen at a target of less than $4/kg (delivered and dispensed). To reach these goals, the program looks at a wide portfolio of processes over a range of time frames and production scales. Currently, most hydrogen in the United States is produced by large-scale natural gas reforming. This established technology has been shown to be able to reach the cost targets in the

  18. Hydrogen (H2) Production by Oxygenic Phototrophs | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Oxygenic Phototrophs Hydrogen (H2) Production by Oxygenic Phototrophs Presentation by Eric Hegg, Michigan State University, at the Biological Hydrogen Production Workshop held September 24-25, 2013, at the National Renewable Energy Laboratory in Golden, Colorado. bio_h2_workshop_hegg.pdf (1.07 MB) More Documents & Publications Renewable Hydrogen Production from Biological Systems Autofermentative Biological Hydrogen Production by Cyanobacteria 2013 Biological Hydrogen Production Workshop

  19. Illinois: High-Energy, Concentration-Gradient Cathode Material for Plug-in Hybrids and All-Electric Vehicles Could Reduce Batteries' Cost and Size

    Broader source: Energy.gov [DOE]

    Batteries for electric drive vehicles and renewable energy storage will reduce petroleum usage, improving energy security and reducing harmful emissions.

  20. Other Hydrothermal Alteration Products | Open Energy Information

    Open Energy Info (EERE)

    Alteration Products Numerous types of colorful hydrothermal alterations compose the landscape at Kerlingarfjoll Geothermal area, Iceland. Photo by Darren Atkins User-specified...

  1. Electrolytic Hydrogen Production Workshop | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Randy Petri, Versa Power Systems PDF icon Renewables and Grid Integration, Kevin Harrison, NREL PDF icon Electrolytic Hydrogen Production: Potential Impacts to Utilities, ...

  2. Product Service Codes @ Headquarters | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Service Codes @ Headquarters A listing of Product Service Codes used at Headquarters Procurement Services PDF icon Produce Service Codes @ Headquarters.pdf More Documents &...

  3. Opportunities to improve energy efficiency and reduce greenhouse gas emissions in the U.S. pulp and paper industry

    SciTech Connect (OSTI)

    Martin, Nathan; Anglani, N.; Einstein, D.; Khrushch, M.; Worrell, E.; Price, L.K.

    2000-07-01

    The pulp and paper industry accounts for over 12% of total manufacturing energy use in the U.S. (U.S. EIA 1997a), contributing 9% to total manufacturing carbon dioxide emissions. In the last twenty-five years primary energy intensity in the pulp and paper industry has declined by an average of 1% per year. However, opportunities still exist to reduce energy use and greenhouse gas emissions in the manufacture of paper in the U.S. This report analyzes the pulp and paper industry (Standard Industrial Code (SIC) 26) and includes a detailed description of the processes involved in the production of paper, providing typical energy use in each process step. We identify over 45 commercially available state-of-the-art technologies and measures to reduce energy use and calculate potential energy savings and carbon dioxide emissions reductions. Given the importance of paper recycling, our analysis examines two cases. Case A identifies potential primary energy savings without accounting for an increase in recycling, while Case B includes increasing paper recycling. In Case B the production volume of pulp is reduced to account for additional pulp recovered from recycling. We use a discount rate of 30% throughout our analysis to reflect the investment decisions taken in a business context. Our Case A results indicate that a total technical potential primary energy savings of 31% (1013 PJ) exists. For case A we identified a cost-effective savings potential of 16% (533 PJ). Carbon dioxide emission reductions from the energy savings in Case A are 25% (7.6 MtC) and 14% (4.4 MtC) for technical and cost-effective potential, respectively. When recycling is included in Case B, overall technical potential energy savings increase to 37% (1215 PJ) while cost-effective energy savings potential is 16%. Increasing paper recycling to high levels (Case B) is nearly cost-effective assuming a cut-off for cost-effectiveness of a simple payback period of 3 years. If this measure is included, then

  4. Opportunities to improve energy efficiency and reduce greenhouse gas emissions in the US pulp and paper industry

    SciTech Connect (OSTI)

    Martin, Nathan; Anglani, N.; Einstein, D.; Khrushch, M.; Worrell, E.; Price, L.K.

    2000-07-01

    The pulp and paper industry accounts for over 12% of total manufacturing energy use in the US (US EIA 1997a), contributing 9% to total manufacturing carbon dioxide emissions. In the last twenty-five years primary energy intensity in the pulp and paper industry has declined by an average of 1% per year. However, opportunities still exist to reduce energy use and greenhouse gas emissions in the manufacture of paper in the US This report analyzes the pulp and paper industry (Standard Industrial Code (SIC) 26) and includes a detailed description of the processes involved in the production of paper, providing typical energy use in each process step. We identify over 45 commercially available state-of-the-art technologies and measures to reduce energy use and calculate potential energy savings and carbon dioxide emissions reductions. Given the importance of paper recycling, our analysis examines two cases. Case A identifies potential primary energy savings without accounting for an increase in recycling, while Case B includes increasing paper recycling. In Case B the production volume of pulp is reduced to account for additional pulp recovered from recycling. We use a discount rate of 30% throughout our analysis to reflect the investment decisions taken in a business context. Our Case A results indicate that a total technical potential primary energy savings of 31% (1013 PJ) exists. For case A we identified a cost-effective savings potential of 16% (533 PJ). Carbon dioxide emission reductions from the energy savings in Case A are 25% (7.6 MtC) and 14% (4.4 MtC) for technical and cost-effective potential, respectively. When recycling is included in Case B, overall technical potential energy savings increase to 37% (1215 PJ) while cost-effective energy savings potential is 16%. Increasing paper recycling to high levels (Case B) is nearly cost-effective assuming a cut-off for cost-effectiveness of a simple payback period of 3 years. If this measure is included, then the

  5. STEAB Renewable Energy Production Incentive (REPI) Action

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    available to the private sector for renewable energy generation investors and developers. ... is increasing demand being placed on private and public utilities to generate ...

  6. Maps: Exploration, Resources, Reserves, and Production - Energy...

    Gasoline and Diesel Fuel Update (EIA)

    ... Pursuant to Section 604 of the Energy Policy and Conservation Act, these maps are one ... button graphic button graphic Greater Green River Basin button graphic button graphic ...

  7. RSI Silicon Products LLC | Open Energy Information

    Open Energy Info (EERE)

    startup which is developing a process for solar-grade silicon manufacture at low energy intensity, spinoff from MIT. Coordinates: 47.237806, -121.179542 Show Map...

  8. Product Efficiency Cases | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (Emerson), seeking relief from the provisions of 10 C.F.R. Part 431, Energy Efficiency Program for Certain Commercial and Industrial Equipment: Test Procedures, Labeling...

  9. Maps: Exploration, Resources, Reserves, and Production - Energy...

    Gasoline and Diesel Fuel Update (EIA)

    ... Department of the Interior, Department of Energy, and Department of Agriculture study of ... button graphic button graphic Greater Green River Basin button graphic button graphic ...

  10. Large Scale Production Computing and Storage Requirements for High Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Physics: Target 2017 Large Scale Production Computing and Storage Requirements for High Energy Physics: Target 2017 HEPlogo.jpg The NERSC Program Requirements Review "Large Scale Computing and Storage Requirements for High Energy Physics" is organized by the Department of Energy's Office of High Energy Physics (HEP), Office of Advanced Scientific Computing Research (ASCR), and the National Energy Research Scientific Computing Center (NERSC). The review's goal is to characterize

  11. Calendar Year 2008 Program Benefits for ENERGY STAR Labeled Products

    SciTech Connect (OSTI)

    Homan, GregoryK; Sanchez, Marla; Brown, RichardE; Lai, Judy

    2010-08-24

    This paper presents current and projected savings for ENERGY STAR labeled products, and details the status of the model as implemented in the September 2009 spreadsheets. ENERGY STAR is a voluntary energy efficiency labeling program operated jointly by the Environmental Protection Agency (US EPA) and the U.S. Department of Energy (US DOE), designed to identify and promote energy-efficient products, buildings and practices. Since the program inception in 1992, ENERGY STAR has become a leading international brand for energy efficient products, and currently labels more than thirty products, spanning office equipment, heating, cooling and ventilation equipment, commercial and residential lighting, home electronics, and major appliances. ENERGY STAR's central role in the development of regional, national and international energy programs necessitates an open process whereby its program achievements to date as well as projected future savings are shared with stakeholders. This report presents savings estimates for ENERGY STAR labeled products. We present estimates of energy, dollar, and carbon savings achieved by the program in the year 2008, annual forecasts for 2009 and 2010, and cumulative savings estimates for the period 1993 through 2008 and cumulative forecasts for the period 2009 through 2015. Through 2008 the program saved 8.8 Quads of primary energy and avoided the equivalent of 158 metric tones carbon (MtC). The forecast for the period 2009-2015 is 18.1 Quads or primary energy saved and 316 MtC emissions avoided. The sensitivity analysis bounds the best estimate of carbon avoided between 104 MtC and 213 MtC (1993 to 2008) and between 206 MtC and 444 MtC (2009 to 2015). In this report we address the following questions for ENERGY STAR labeled products: (1) How are ENERGY STAR impacts quantified; (2) What are the ENERGY STAR achievements; and (3) What are the limitations to our method?

  12. Energy Report: U.S. Wind Energy Production and Manufacturing Surges,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Supporting Jobs and Diversifying U.S. Energy Economy | Department of Energy Report: U.S. Wind Energy Production and Manufacturing Surges, Supporting Jobs and Diversifying U.S. Energy Economy Energy Report: U.S. Wind Energy Production and Manufacturing Surges, Supporting Jobs and Diversifying U.S. Energy Economy August 14, 2012 - 9:00am Addthis News Media Contact (202) 586-4940 WASHINGTON - The Energy Department released a new report today highlighting strong growth in the U.S. wind energy

  13. Using Qualified Energy Conservation Bonds for Public Building Upgrades. Reducing Energy Bills in the City of Philadelphia

    SciTech Connect (OSTI)

    Zimring, Mark

    2012-07-18

    Qualified Energy Conservation Bonds (QECBs) are federally-subsidized bonds that enable state, tribal, and local government issuers to borrow money to fund a range of energy conservation projects, including public building upgrades that reduce energy use by at least 20 percent, at very attractive borrowing rates and long terms. As part of the American Recovery and Reinvestment Act (ARRA), the City of Philadelphia received a $15 million QECB award from the U.S. Department of the Treasury (Treasury). The city leveraged $6.25 million of its QECB allocation to finance half of a $12.6 million initiative to upgrade the energy efficiency of City buildings. The upgrades to four city facilities are expected to deliver over $10 million of net savings, and are a major step towards achieving the city’s goal of reducing government energy consumption by 30 percent by 2015.

  14. Communication Product Quality Assurance Checklists | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Quality Assurance Checklists Communication Product Quality Assurance Checklists These quality assurance checklists list the requirements for Office of Energy Efficiency and Renewable Energy (EERE) publication and exhibit communication products. Office Checklist The EERE Office Requestor, Subject Matter Expert, and/or the EERE Office Communications Lead should ensure the product meets the following requirements. Content is written for its intended audience(s). Content is free from grammatical

  15. NREL Wind to Hydrogen Project: Renewable Hydrogen Production for Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Storage & Transportation | Department of Energy Wind to Hydrogen Project: Renewable Hydrogen Production for Energy Storage & Transportation NREL Wind to Hydrogen Project: Renewable Hydrogen Production for Energy Storage & Transportation Presented at the Renewable Hydrogen Workshop, Nov. 16, 2009, in Palm Springs, CA renewable_hydrogen_workshop_nov16_ramsden.pdf (1.5 MB) More Documents & Publications Hour-by-Hour Cost Modeling of Optimized Central Wind-Based Water Electrolysis

  16. Waste/By-Product Hydrogen | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Waste/By-Product Hydrogen Waste/By-Product Hydrogen Presentation by Ruth Cox, Fuel Cell and Hydrogen Energy Association, at the DOE-DOD Waste-to-Energy using Fuel Cells Workshop held Jan. 13, 2011 waste_cox.pdf (1.15 MB) More Documents & Publications Biogas Technologies and Integration with Fuel Cells Tri-Generation Success Story: World's First Tri-Gen Energy Station-Fountain Valley Biogas and Fuel Cells

  17. GTP energy production from low-temperature resources, coproduced fluids,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and geopressured resources. | Department of Energy GTP energy production from low-temperature resources, coproduced fluids, and geopressured resources. GTP energy production from low-temperature resources, coproduced fluids, and geopressured resources. This document provides and overview of how to respond to a funding opportunity announcement. go_foa_overview.pdf (94.71 KB) More Documents & Publications Microsoft Word - fDE-FOA-0000109.rtf Microsoft Word - FOA cover sheet.doc DISCLAIMER:

  18. Ultrahigh-Efficiency Aluminum Production Cells | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ultrahigh-Efficiency Aluminum Production Cells Ultrahigh-Efficiency Aluminum Production Cells ultrahi-eff_aluminum.pdf (512.14 KB) More Documents & Publications U.S. Energy Requirements for Aluminum Production WA_98_001_REYNOLDS_METALS_COMPANY_Waiver_of_Domestic_and_For.pdf ITP Aluminum: Inert Anodes Roadmap

  19. Economic benefits of an economizer system: Energy savings and reduced sick leave

    SciTech Connect (OSTI)

    Fisk, William J.; Seppanen, Olli; Faulkner, David; Huang, Joe

    2004-02-01

    This study estimated the health, energy, and economic benefits of an economizer ventilation control system that increases outside air supply during mild weather to save energy. A model of the influence of ventilation rate on airborne transmission of respiratory illnesses was used to extend the limited data relating ventilation rate with illness and sick leave. An energy simulation model calculated ventilation rates and energy use versus time for an office building in Washington, D.C. with fixed minimum outdoor air supply rates, with and without an economizer. Sick leave rates were estimated with the disease transmission model. In the modeled 72-person office building, our analyses indicate that the economizer reduces energy costs by approximately $2000 and, in addition, reduces sick leave. The annual financial benefit of the decrease in sick leave is estimated to be between $6,000 and $16,000. This modeling suggests that economizers are much more cost effective than currently recognized.

  20. Memorandum of Understanding on Improving the Energy Efficiency of Products

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Buildings between the U.S. Environmental Protection Agency and the U.S. Department of Energy, dated September 30, 2009 | Department of Energy Memorandum of Understanding on Improving the Energy Efficiency of Products and Buildings between the U.S. Environmental Protection Agency and the U.S. Department of Energy, dated September 30, 2009 Memorandum of Understanding on Improving the Energy Efficiency of Products and Buildings between the U.S. Environmental Protection Agency and the U.S.

  1. Reduced carbon emission estimates from fossil fuel combustion and cement production in China

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Liu, Z.; Guan, D.; Wei, W.; Davis, S.; Ciais, P.; Bai, J; Peng, S.; Zhang, Q.; Hubacek, K.; Marland, Gregg; et al

    2015-08-19

    Nearly three-quarters of the growth in global carbon emissions from the burning of fossil fuels and cement production between 2010 and 2012 occurred in China. Yet estimates of Chinese emissions remain subject to large uncertainty; inventories of China’s total fossil fuel carbon emissions in 2008 differ by 0.3 gigatonnes of carbon, or 15 per cent. The primary sources of this uncertainty are conflicting estimates of energy consumption and emission factors, the latter being uncertain because of very few actual measurements representative of the mix of Chinese fuels. Here we re-evaluate China’s carbon emissions using updated and harmonized energy consumption andmore » clinker production data and two new and comprehensive sets of measured emission factors for Chinese coal. We find that total energy consumption in China was 10 per cent higher in 2000–2012 than the value reported by China’s national statistics, that emission factors for Chinese coal are on average 40 per cent lower than the default values recommended by the Intergovernmental Panel on Climate Change, and that emissions from China’s cement production are 45 per cent less than recent estimates. Altogether, our revised estimate of China’s CO2 emissions from fossil fuel combustion and cement production is 2.49 gigatonnes of carbon (2 standard deviations = ±7.3 per cent) in 2013, which is 14 per cent lower than the emissions reported by other prominent inventories. Over the full period 2000 to 2013, our revised estimates are 2.9 gigatonnes of carbon less than previous estimates of China’s cumulative carbon emissions. Our findings suggest that overestimation of China’s emissions in 2000–2013 may be larger than China’s estimated total forest sink in 1990–2007 (2.66 gigatonnes of carbon) or China’s land carbon sink in 2000–2009 (2.6 gigatonnes of carbon).« less

  2. Reduced carbon emission estimates from fossil fuel combustion and cement production in China

    SciTech Connect (OSTI)

    Liu, Z.; Guan, D.; Wei, W.; Davis, S.; Ciais, P.; Bai, J; Peng, S.; Zhang, Q.; Hubacek, K.; Marland, Gregg; Andres, Robert Joseph; Crawford-Brown, D.; Lin, J.; Zhao, H.; Hong, C.; Boden, Thomas A.; Feng, K.; Peters, Glen P.; Xi, F.; Liu, J.; Li, Y.; Zhao, Y.; Zeng, Ning; He, K.

    2015-08-19

    Nearly three-quarters of the growth in global carbon emissions from the burning of fossil fuels and cement production between 2010 and 2012 occurred in China. Yet estimates of Chinese emissions remain subject to large uncertainty; inventories of China’s total fossil fuel carbon emissions in 2008 differ by 0.3 gigatonnes of carbon, or 15 per cent. The primary sources of this uncertainty are conflicting estimates of energy consumption and emission factors, the latter being uncertain because of very few actual measurements representative of the mix of Chinese fuels. Here we re-evaluate China’s carbon emissions using updated and harmonized energy consumption and clinker production data and two new and comprehensive sets of measured emission factors for Chinese coal. We find that total energy consumption in China was 10 per cent higher in 2000–2012 than the value reported by China’s national statistics, that emission factors for Chinese coal are on average 40 per cent lower than the default values recommended by the Intergovernmental Panel on Climate Change, and that emissions from China’s cement production are 45 per cent less than recent estimates. Altogether, our revised estimate of China’s CO2 emissions from fossil fuel combustion and cement production is 2.49 gigatonnes of carbon (2 standard deviations = ±7.3 per cent) in 2013, which is 14 per cent lower than the emissions reported by other prominent inventories. Over the full period 2000 to 2013, our revised estimates are 2.9 gigatonnes of carbon less than previous estimates of China’s cumulative carbon emissions. Our findings suggest that overestimation of China’s emissions in 2000–2013 may be larger than China’s estimated total forest sink in 1990–2007 (2.66 gigatonnes of carbon) or China’s land carbon sink in 2000–2009 (2.6 gigatonnes of carbon).

  3. Chronological History of Federal Energy-Efficient Product

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Chronological History of Federal Energy-Efficient Product Procurement: Executive, Legislative and Regulatory Requirements, Actions and Mandates Introduction The National Energy Conservation Policy Act (NECPA), signed into law in 1978, is the foundational authority for federal energy management requirements. Various legislative actions and Executive Orders (EOs) have developed purchasing requirements that encompass all areas of federal procurement. Federal agencies have been required to purchase

  4. Calendar Year 2009 Program Benefits for ENERGY STAR Labeled Products

    SciTech Connect (OSTI)

    Homan, Gregory K; Sanchez, Marla C.; Brown, Richard E.

    2010-11-15

    ENERGY STAR is a voluntary energy efficiency labeling program operated jointly by the Environmental Protection Agency (US EPA) and the U.S. Department of Energy (US DOE), designed to identify and promote energy-efficient products, buildings and practices. Since the program inception in 1992, ENERGY STAR has become a leading international brand for energy efficient products, and currently labels more than thirty products, spanning office equipment, heating, cooling and ventilation equipment, commercial and residential lighting, home electronics, and major appliances. ENERGY STAR's central role in the development of regional, national and international energy programs necessitates an open process whereby its program achievements to date as well as projected future savings are shared with stakeholders. This report presents savings estimates from the use ENERGY STAR labeled products. We present estimates of energy, dollar, and carbon savings achieved by the program in the year 2009, annual forecasts for 2010 and 2011, and cumulative savings estimates for the period 1993 through 2009 and cumulative forecasts for the period 2010 through 2015. Through 2009 the program saved 9.5 Quads of primary energy and avoided the equivalent of 170 million metric tons carbon (MMTC). The forecast for the period 2009-2015 is 11.5 Quads or primary energy saved and 202 MMTC emissions avoided. The sensitivity analysis bounds the best estimate of carbon avoided between 110 MMTC and 231 MMTC (1993 to 2009) and between 130 MMTC and 285 MMTC (2010 to 2015).

  5. East Central Ag Products | Open Energy Information

    Open Energy Info (EERE)

    63352 Product: 600-member, farmer-owned cooperative which owns and operates a 45mmgy bioethanol plant in Laddonia, Missouri. Coordinates: 39.24073, -91.645599 Show Map Loading...

  6. Product Efficiency Cases | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Standards). In its exception request, TLI requests exception relief for its principal product, a PAR-shaped daylight incandescent reflector lamp known as the SoLux PAR. September...

  7. UQM Power Products Inc | Open Energy Information

    Open Energy Info (EERE)

    Colorado-based, subsidiary if UQM Technologies, manufacturer of proprietary electric motors. References: UQM Power Products Inc1 This article is a stub. You can help OpenEI by...

  8. Domestic Uranium Production Report - Quarterly - Energy Information...

    U.S. Energy Information Administration (EIA) Indexed Site

    U.S. uranium in-situ-leach plants in production (state) Crow Butte Operation (Nebraska) Lost Creek Project (Wyoming) Nichols Ranch ISR Project (Wyoming) Ross CPP (Wyoming) Smith ...

  9. Buy Energy-Efficient Products (Fact Sheet), Federal Energy Management...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Federal agencies can also use a variety of financing tools to pay for energy projects. ... technical specifications, keeping in mind that compliance must be determined based ...

  10. Methane Hydrate Production Feasibility | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Production Feasibility Methane Hydrate Production Feasibility The red curves are temperature profiles for various water depths; the blue line shows methane hydrate stability relative to temperature and pressure. The area enclosed by the two curves represents the area of methane hydrate stability. The red curves are temperature profiles for various water depths; the blue line shows methane hydrate stability relative to temperature and pressure. The area enclosed by the two curves represents the

  11. Hydrogen Production: Biomass Gasification | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Biomass Gasification Hydrogen Production: Biomass Gasification Photo of a man standing near a pilot-scale gasification system. Biomass gasification is a mature technology pathway that uses a controlled process involving heat, steam, and oxygen to convert biomass to hydrogen and other products, without combustion. Because growing biomass removes carbon dioxide from the atmosphere, the net carbon emissions of this method can be low, especially if coupled with carbon capture, utilization, and

  12. UDAC Activities and Products | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    UDAC Activities and Products UDAC Activities and Products January 27, 2014 UDAC 2014 Report UDAC 2014 Report November 27, 2013 UDAC Meeting - December 16, 2013 Federal Register Notice for December 16, 2013 UDAC Meeting UDAC 2014 Findings and Recommendations Minutes from December 16, 2013 UDAC Meeting November 20, 2013 UDAC Meeting - December 9, 2013 Federal Register Notice for December 9, 2013 UDAC Meeting Federal Register Notice for December 9, 2013 UDAC Meeting Meeting documents from December

  13. URTAC Activities and Products | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    URTAC Activities and Products URTAC Activities and Products December 18, 2013 Recommendations: Draft Annual Plan Section 999 Annual Plan November 27, 2013 URTAC Meeting - December 18, 2013 November 18, 2013 URTAC Meeting - December 4, 2013 October 2, 2013 URTAC Meeting - October 2013 Federal Register Notice for October 10, 2013 URTAC Meeting The 24th Meeting of the Unconventional Resources Technology Advisory Committee (URTAC), previously scheduled for October 10, 2013, is postponed until

  14. QCoefficient Uses EnergyPlus to Reduce Willis Tower Energy Bills...

    Energy Savers [EERE]

    ... For example, this estimate does not account for the effect of displacing the marginal coal-fired generating plant from unit commitment. Addthis Related Articles Energy Department ...

  15. FEMP Updates Product Energy-Efficiency Requirements

    Broader source: Energy.gov [DOE]

    FEMP updated energy-efficiency requirements for Federal procurement of commercial boilers, water-cooled ice machines, and industrial (high/low bay) luminaires, and established new efficiency requirements for suspended luminaires.

  16. Kodak: Optimizing the Pumping System Saves Energy and Reduces Demand Charges at a Chemical Plant

    SciTech Connect (OSTI)

    Not Available

    2005-06-01

    This two-page performance spotlight describes how, in 2003, Kodak's facilities in Rochester, New York, significantly improved the energy efficiency of its two lake-water pumping stations to save more than $100,000 annually in energy and maintenance costs. The project reduced energy use by more than 1 million kilowatt-hours per year and allowed fewer pumps to operate at any one time, while maintaining previous pumping performance levels. A U.S. Department of Energy Qualified Pumping System Assessment Tool Specialist at Flowserve Corporation assisted in the initial system assessment that resulted in this project.

  17. Energy Assessment Helps Kaiser Aluminum Save Energy and Improve Productivity

    Broader source: Energy.gov [DOE]

    This case study describes how a DOE energy assessment at Kaiser Aluminum's extrusion plant in Sherman, Texas, identified significant potential energy savings in its process heating systems. Employees at the Sherman plant wasted no time moving forward with assessment recommendations. First, they adjusted burner controls on one of the main reverberatory melting furnaces to lower excess oxygen levels. They also made some repairs to the furnace’s door sill and jamb to prevent cold air from seeping into it. By implementing these measures the plant achieved annual energy savings of approximately 45,000 MMBtu and improved the furnace’s energy intensity by 11.1% between 2006 and 2007. With project costs of approximately $28,000 and energy cost savings of $360,000, the simple payback was under 1 month.

  18. How America can look within to achieve energy security and reduce global warming.

    SciTech Connect (OSTI)

    Richter, B.; Goldston, D.; Crabtree, G.; Glicksman, L.; Goldstein, D.; Greene, D.; Kammen, D.; Levin, M.; Lubell, M.; Savitz, M.; Sperling, D.; Schlachter, F.; Scofield, J.; Dawson, J.

    2008-12-01

    Making major gains in energy efficiency is one of the most economical and effective ways our nation can wean itself off its dependence on foreign oil and reduce its emissions of greenhouse gases. Transportation and buildings, which account for two thirds of American energy usage, consume far more than they need to, but even though there are many affordable energy efficient technologies that can save consumers money, market imperfections inhibit their adoption. To overcome the barriers, the federal government must adopt policies that will transform the investments into economic and societal benefit. And the federal government must invest in research and development programs that target energy efficiency. Energy efficiency is one of America's great hidden energy reserves. We should begin tapping it now. Whether you want the United States to achieve greater energy security by weaning itself off foreign oil, sustain strong economic growth in the face of worldwide competition or reduce global warming by decreasing carbon emissions, energy efficiency is where you need to start. Thirty-five years ago the U.S. adopted national strategies, implemented policies and developed technologies that significantly improved energy efficiency. More than three decades have passed since then, and science and technology have progressed considerably, but U.S. energy policy has not. It is time to revisit the issue. In this report we examine the scientific and technological opportunities and policy actions that can make the United States more energy efficient, increase its security and reduce its impact on global warming. We believe the findings and recommendations will help Congress and the next administration to realize these goals. Our focus is on the transportation and buildings sectors of the economy. The opportunities are huge and the costs are small.

  19. Achieving Water-Sustainable Bioenergy Production | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Achieving Water-Sustainable Bioenergy Production Achieving Water-Sustainable Bioenergy Production Breakout Session 3-A: Growing a Water-Smart Bioeconomy Achieving Water-Sustainable Bioenergy Production May Wu, Principal Environmental System Analyst in the Energy Systems Division, Argonne National Laboratory wu_bioenergy_2015.pdf (3.01 MB) More Documents & Publications Assessing Impact of Biofuel Production on Regional Water Resource Use and Availability Integrated Biorefinery Process

  20. Sandia Energy - Power Production Started on All Three SWiFT Turbines

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Power Production Started on All Three SWiFT Turbines Home Renewable Energy Energy SWIFT Facilities Partnership News Wind Energy News & Events Power Production Started on All Three...

  1. Domestic Uranium Production Report - Energy Information Administration

    U.S. Energy Information Administration (EIA) Indexed Site

    Domestic Uranium Production Report - Annual With Data for 2015 | Release Date: May 5, 2016 | Next Release Date: May 2017 | full report Previous domestic uranium production reports Year: 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 Go Drilling Total uranium drilling was 1,518 holes covering 0.9 million feet, 13% fewer holes than in 2015. Expenditures for uranium drilling in the United States were $29 million in 2015, an increase of 2% compared with 2014. Figure 1. U.S. Uranium drilling

  2. Energy Production and Trade: An Overview of Some Macroeconomic Issues

    U.S. Energy Information Administration (EIA) Indexed Site

    Energy Production and Trade: An Overview of Some Macroeconomic Issues Vipin Arora November 2014 Independent Statistics & Analysis www.eia.gov U.S. Energy Information Administration Washington, DC 20585 This paper is released to encourage discussion and critical comment. The analysis and conclusions expressed here are those of the authors and not necessarily those of the U.S. Energy Information Administration. WORKING PAPER SERIES November 2014 Vipin Arora | U.S. Energy Information

  3. Reducing energy costs in multifamily housing: guidelines for using energy-management companies

    SciTech Connect (OSTI)

    Shafer, P.

    1986-03-01

    This publication is designed to provide guidelines to help sponsors of multi-family projects assisted or insured by the U.S. Department of Housing and Urban Development (HUD), as well as other building owners, utilize performance agreements as a way to make energy-efficiency improvements. These guidelines are based on experience gained in a demonstration project initiated by HUD to test the feasibility of using Energy Management Companies (EMCs) to make energy improvements in assisted housing for the elderly or handicapped.

  4. Potential for the Use of Energy Savings Performance Contracts to Reduce Energy Consumption and Provide Energy and Cost Savings in Non-Building Applications

    SciTech Connect (OSTI)

    Williams, Charles; Green, Andrew S.; Dahle, Douglas; Barnett, John; Butler, Pat; Kerner, David

    2013-08-01

    The findings of this study indicate that potential exists in non-building applications to save energy and costs. This potential could save billions of federal dollars, reduce reliance on fossil fuels, increase energy independence and security, and reduce greenhouse gas emissions. The Federal Government has nearly twenty years of experience with achieving similar energy cost reductions, and letting the energy costs savings pay for themselves, by applying energy savings performance contracts (ESPC) inits buildings. Currently, the application of ESPCs is limited by statute to federal buildings. This study indicates that ESPCs can be a compatible and effective contracting tool for achieving savings in non-building applications.

  5. How America Can Look Within to Achieve Energy Security and Reduce Global Warming

    SciTech Connect (OSTI)

    Richter, Burton; Savitz, Maxine; Schlachter, Fred; Dawson, James; Crabtree, George; Greene, David L; Levine, Mark; Sperling, Daniel; Scofield, John; Glicksman, Leon; Goldstein, David; Goldston, David

    2008-01-01

    Making major gains in energy efficiency is one of the most economical and effective ways our nation can wean itself off its dependence on foreign oil and reduce its emissions of greenhouse gases. Transportation and buildings, which account for two thirds of American energy usage, consume far more than they need to, but even though there are many affordable energy efficient technologies that can save consumers money, market imperfections inhibit their adoption. To overcome the barriers, the federal government must adopt policies that will transform the investments into economic and societal benefit. And the federal government must invest in research and development programs that target energy efficiency. Energy efficiency is one of America s great hidden energy reserves. We should begin tapping it now.

  6. Method to Reduce Camber in Anode-Supported SOFCs - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Vehicles and Fuels Vehicles and Fuels Energy Storage Energy Storage Advanced Materials Advanced Materials Find More Like This Return to Search Method to Reduce Camber in Anode-Supported SOFCs Pacific Northwest National Laboratory Contact PNNL About This Technology A) Typical camber developed in 7 cm x 7 cm anode-supported SOFC. B) Details on matched TEC backing layer opposite electrolyte surface for camber control (Invention 13536). A) Typical camber developed in 7 cm x 7 cm anode-supported

  7. Specifying Today's Products | Department of Energy

    Energy Savers [EERE]

    » Solar Radiation Basics Solar Radiation Basics August 21, 2013 - 11:40am Addthis Solar radiation, often called the solar resource, is a general term for the electromagnetic radiation emitted by the sun. Solar radiation can be captured and turned into useful forms of energy, such as heat and electricity, using a variety of technologies. However, the technical feasibility and economical operation of these technologies at a specific location depends on the available solar resource. Basic

  8. Water Efficient Energy Production for Geothermal Resources

    SciTech Connect (OSTI)

    GTO

    2015-06-01

    Water consumption in geothermal energy development occurs at several stages along the life cycle of the plant, during construction of the wells, piping, and plant; during hydroshearing and testing of the reservoir (for EGS); and during operation of the plant. These stages are highlighted in the illustration above. For more information about actual water use during these stages, please see the back of this sheet..

  9. Reducing Energy Use in Existing Homes by 30%: Learning From Home Performance with ENERGY STAR

    SciTech Connect (OSTI)

    Liaukus, C.

    2014-12-01

    The improvement of existing homes in the United States can have a much greater impact on overall residential energy use than the construction of highly efficient new homes. There are over 130 million existing housing units in the U.S., while annually new construction represents less than two percent of the total supply (U.S. Census Bureau, 2013). Therefore, the existing housing stock presents a clear opportunity and responsibility for Building America (BA) to guide the remodeling and retrofit market toward higher performance existing homes. There are active programs designed to improve the energy performance of existing homes. Home Performance with ENERGY STAR (HPwES) is a market-rate program among them. BARA's research in this project verified that the New Jersey HPwES program is achieving savings in existing homes that meet or exceed BA's goal of 30%. Among the 17 HPwES projects with utility data included in this report, 15 have actual energy savings ranging from 24% to 46%. Further, two of the homes achieved that level of energy savings without the costly replacement of heating and cooling equipment, which indicates that less costly envelope packages could be offered to consumers unable to invest in more costly mechanical packages, potentially creating broader market impact.

  10. Chronological History of Federal Energy-Efficient Product Procurement...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    10 CFR Part 436, June 19, 2007 Final Rule, Federal Register, 74 FR 10830, 10 CFR Part 436, March 13, 2009 Sample Contract Language for Construction Using Energy-Efficient Products

  11. Subscribe to Energy-Efficient Product Procurement Updates

    Broader source: Energy.gov [DOE]

    FEMP offers e-mail updates covering energy-efficient product procurement requirements, guidance, and assistance. Enter your e-mail address below to begin the registration process. After you...

  12. Addendum Added to Innovative Demonstration of Geothermal Energy Production FOA

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy’s (DOE) Geothermal Technologies Program (GTP) has released a Funding Opportunity Announcement (FOA) that seeks innovative demonstration of energy production from non-conventional geothermal resources.

  13. Federal Procurement of Energy-Efficient Products January 2013 Update

    Broader source: Energy.gov [DOE]

    Welcome to the seventh issue of Federal Energy-Efficient Product Procurement! This bi-monthly update helps Federal procurement officials, facility managers, and others remain up to date on events, training, technology, and changes to acquisition requirements.

  14. Superior Energy Performance: Certifying Increased Energy Productivity under ISO 50001

    Office of Environmental Management (EM)

    Superior Energy Performance Measurement and Verification Protocol for Industry November 19, 2012 Table of Contents ©2012, The Regents of the University of California Notice: this manuscript has been authored by employees of the Regents of the University of California, and others, under Contract No DE-AC02-05CH11231 with the U.S. Department of Energy, for the management and operation of the Lawrence Berkeley National Laboratory. The United State Government retains a non-exclusive, paid-up,

  15. White Paper on Energy Efficiency Status of Energy-Using Products in China (2011)

    SciTech Connect (OSTI)

    Zhou, Nan; Romankiewicz, John; Fridley, David

    2012-06-01

    This White Paper focuses on the areas and products involved in the above tasks, based on the White Paper - Energy Efficiency Status of Energy-Using Products in China (2010), here referred to as “White Paper 2010”, which analyzed the energy efficiency status of 21 typical energy-using products in five sectors: household appliances, office equipment, commercial equipment, industrial equipment, and lighting equipment. Table 1 illustrates the detailed product coverage for this year’s paper, noting the addition of three household appliance items (automatic electric rice cooker, AC electric fan, and household induction cooktop) and one industrial sector item (three-phase distribution transformer).

  16. Quantify the energy and environmental benefits of implementing energy-efficiency measures in China’s iron and steel production

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ma, Ding; Chen, Wenying; Xu, Tengfang

    2015-08-21

    As one of the most energy-, emission- and pollution-intensive industries, iron and steel production is responsible for significant emissions of greenhouse gas (GHG) and air pollutants. Although many energy-efficiency measures have been proposed by the Chinese government to mitigate GHG emissions and to improve air quality, lacking full understanding of the costs and benefits has created barriers against implementing these measures widely. This paper sets out to advance the understanding by addressing the knowledge gap in costs, benefits, and cost-effectiveness of energy-efficiency measures in iron and steel production. Specifically, we build a new evaluation framework to quantify energy benefits andmore » environmental benefits (i.e., CO2 emission reduction, air-pollutants emission reduction and water savings) associated with 36 energy-efficiency measures. Results show that inclusion of benefits from CO2 and air-pollutants emission reduction affects the cost-effectiveness of energy-efficiency measures significantly, while impacts from water-savings benefits are moderate but notable when compared to the effects by considering energy benefits alone. The new information resulted from this study should be used to augment future programs and efforts in reducing energy use and environmental impacts associated with steel production.« less

  17. Quantify the energy and environmental benefits of implementing energy-efficiency measures in China’s iron and steel production

    SciTech Connect (OSTI)

    Ma, Ding; Chen, Wenying; Xu, Tengfang

    2015-08-21

    As one of the most energy-, emission- and pollution-intensive industries, iron and steel production is responsible for significant emissions of greenhouse gas (GHG) and air pollutants. Although many energy-efficiency measures have been proposed by the Chinese government to mitigate GHG emissions and to improve air quality, lacking full understanding of the costs and benefits has created barriers against implementing these measures widely. This paper sets out to advance the understanding by addressing the knowledge gap in costs, benefits, and cost-effectiveness of energy-efficiency measures in iron and steel production. Specifically, we build a new evaluation framework to quantify energy benefits and environmental benefits (i.e., CO2 emission reduction, air-pollutants emission reduction and water savings) associated with 36 energy-efficiency measures. Results show that inclusion of benefits from CO2 and air-pollutants emission reduction affects the cost-effectiveness of energy-efficiency measures significantly, while impacts from water-savings benefits are moderate but notable when compared to the effects by considering energy benefits alone. The new information resulted from this study should be used to augment future programs and efforts in reducing energy use and environmental impacts associated with steel production.

  18. EERE Success Story—Colorado: Energy Modeling Products Support Energy Efficiency Projects

    Broader source: Energy.gov [DOE]

    Xcel Energy, a Minnesota-based utility that supplies electricity and natural gas to eight states, employed two EERE-developed products in developing a program management tool for its Energy Design Assistance (EDA) program. Through EDA, Xcel provides energy consulting services to construction projects to encourage efficient energy use.

  19. Energy Conservation Program for Consumer Products: Energy Conservation Standards for Direct Heating Equipment and Pool Heaters, Request for Information

    Office of Energy Efficiency and Renewable Energy (EERE)

    Energy Conservation Program for Consumer Products: Energy Conservation Standards for Direct Heating Equipment and Pool Heaters, Request for Information

  20. Energy Efficiency Program for Residential Products: Energy Conservation Standards for Residential Dishwashers, Reopening of the Comment Period

    Office of Energy Efficiency and Renewable Energy (EERE)

    Energy Efficiency Program for Residential Products: Energy Conservation Standards for Residential Dishwashers, Reopening of the Comment Period

  1. Reducing energy costs at state agencies and institutions in Texas through the Governor's energy management center

    SciTech Connect (OSTI)

    White, J.A.

    1989-01-01

    The one year internship required for partial fulfillment of the Doctor of Engineering Degree was completed at the Governor's Energy Management Center in Austin, Texas. The intern worked for the State Agencies Department of the Energy Management Center. The intern was involved in a variety of projects, but the primary projects requiring the greatest time were the involvement with the design reviews for energy efficiency of new prisons being constructed in Texas, conducting energy management audits at 18 major state universities, and the technical and administrative assistance to the State Cogeneration Council. Other project involvement included managing the preliminary engineering design of the cogeneration facility at Austin State Hospital, responsibility for applying for a $1.4 million dollar crude oil refund on the behalf of all state agencies in Texas, and assisting in the planning and coordination of the $48 million Revolving Loan Program for the state of Texas. The internship taught many things about management and communications. The experience also provided a better understanding of how the state and federal government operate. The greatest contribution of the internship experience was the improvement of the intern's written and oral communication skills.

  2. ISSUANCE 2016-05-19: Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment: Final Determination of Miscellaneous Refrigeration Products as Covered Products

    Broader source: Energy.gov [DOE]

    Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment: Final Determination of Miscellaneous Refrigeration Products as Covered Products

  3. ISSUANCE 2016-02-26: Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment: Supplemental Proposed Determination of Miscellaneous Refrigeration Products as Covered Products

    Broader source: Energy.gov [DOE]

    Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment: Supplemental Proposed Determination of Miscellaneous Refrigeration Products as Covered Products

  4. DOE Science Showcase - Hydrogen Production | OSTI, US Dept of Energy

    Office of Scientific and Technical Information (OSTI)

    Office of Scientific and Technical Information Hydrogen Production Hydrogen Research in DOE Databases Energy Citations Database Information Bridge Science.gov WorldWideScience.org More information Making molecular hydrogen more efficiently Breaking Up (Hydrogen) No Longer As Hard To Do Hydrogen and Our Energy Future Fuel Cell Animation Hydrogen & Fuel Cells Increase your Hydrogen IQ

  5. Energy Production from Zoo Animal Wastes

    SciTech Connect (OSTI)

    Klasson, KT

    2003-04-07

    Elephant and rhinoceros dung was used to investigate the feasibility of generating methane from the dung. The Knoxville Zoo produces 30 cubic yards (23 m{sup 3}) of herbivore dung per week and cost of disposal of this dung is $105/week. The majority of this dung originates from the Zoo's elephant and rhinoceros population. The estimated weight of the dung is 20 metric tons per week and the methane production potential determined in experiments was 0.033 L biogas/g dung (0.020 L CH{sub 4}/g dung), and the digestion of elephant dung was enhanced by the addition of ammonium nitrogen. Digestion was better overall at 37 C when compared to digestion at 50 C. Based on the amount of dung generated at the Knoxville Zoo, it is estimated that two standard garden grills could be operated 24 h per day using the gas from a digester treating 20 metric ton herbivore dung per week.

  6. U.S. Secretary of Energy Concludes Productive G8+3 Energy Ministerial

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Meeting in Japan | Department of Energy Productive G8+3 Energy Ministerial Meeting in Japan U.S. Secretary of Energy Concludes Productive G8+3 Energy Ministerial Meeting in Japan June 8, 2008 - 12:51pm Addthis WASHINGTON- U.S. Secretary of Energy Samuel W. Bodman today concluded his weekend visit to Aomori, Japan where he participated in the Five-Country and the Group of Eight (G8), China, India and Korea Energy Ministerial meetings hosted by Japan's Minister of Economy, Trade and Industry

  7. Evaluating Fenestration Products for Zero-Energy Buildings: Issuesfor Discussion

    SciTech Connect (OSTI)

    Arasteh, Dariush; Curcija, Charlie; Huang, Joe; Huizenga,Charlie; Kohler, Christian

    2006-07-25

    Computer modeling to determine fenestration product energy properties (U-factor, SHGC, VT) has emerged as the most cost-effective and accurate means to quantify them. Fenestration product simulation tools have been effective in increasing the use of low-e coatings and gas fills in insulating glass and in the widespread use of insulating frame designs and materials. However, for more efficient fenestration products (low heat loss products, dynamic products, products with non-specular optical characteristics, light re-directing products) to achieve widespread use, fenestration modeling software needs to be improved. This paper addresses the following questions: (1) Are the current properties (U, SHGC, VT) calculated sufficient to compare and distinguish between windows suitable for Zero Energy Buildings and conventional window products? If not, what data on the thermal and optical performance, on comfort, and on peak demand of windows is needed. (2) Are the algorithms in the tools sufficient to model the thermal and optical processes? Are specific heat transfer and optical effects not accounted for? Is the existing level of accuracy enough to distinguish between products designed for Zero Energy Buildings? Is the current input data adequate?

  8. Easing the natural gas crisis: Reducing natural gas prices through increased deployment of renewable energy and energy efficiency

    SciTech Connect (OSTI)

    Wiser, Ryan; Bolinger, Mark; St. Clair, Matt

    2004-12-21

    Heightened natural gas prices have emerged as a key energy-policy challenge for at least the early part of the 21st century. With the recent run-up in gas prices and the expected continuation of volatile and high prices in the near future, a growing number of voices are calling for increased diversification of energy supplies. Proponents of renewable energy and energy efficiency identify these clean energy sources as an important part of the solution. Increased deployment of renewable energy (RE) and energy efficiency (EE) can hedge natural gas price risk in more than one way, but this paper touches on just one potential benefit: displacement of gas-fired electricity generation, which reduces natural gas demand and thus puts downward pressure on gas prices. Many recent modeling studies of increased RE and EE deployment have demonstrated that this ''secondary'' effect of lowering natural gas prices could be significant; as a result, this effect is increasingly cited as justification for policies promoting RE and EE. This paper summarizes recent studies that have evaluated the gas-price-reduction effect of RE and EE deployment, analyzes the results of these studies in light of economic theory and other research, reviews the reasonableness of the effect as portrayed in modeling studies, and develops a simple tool that can be used to evaluate the impact of RE and EE on gas prices without relying on a complex national energy model. Key findings are summarized.

  9. Energy use and carbon dioxide emissions from steel production in China

    SciTech Connect (OSTI)

    Price, Lynn; Sinton, Jonathan; Worrell, Ernst; Phylipsen, Dian; Xiulian, Hu; Ji, Li

    2004-01-01

    In 1996, China manufactured just over 100 Mt of steel and became the world s largest steel producer. Official Chinese energy consumption statistics for the steel industry include activities not directly associated with the production of steel, double-count some coal-based energy consumption, and do not cover the entire Chinese steelmaking industry. In this paper, we make adjustments to the reported statistical data in order to provide energy use values for steel production in China that are comparable to statistics used internationally. We find that for 1996, official statistics need to be reduced by 1365 PJ to account for non-steel production activities and double-counting. Official statistics also need to be increased by 415 PJ in order to include steelmaking energy use of small plants not included in official statistics. This leads to an overall reduction of 950 PJ for steelmaking in China in 1996. Thus, the official final energy use value of 4018 PJ drops to 3067 PJ. In primary energy terms, the official primary energy use value of 4555 PJ is reduced to 3582 PJ when these adjustments are made.

  10. Reducing Idle Power Consumption in Office Spaces Saves U.S. Navy in Energy Costs (Fact Sheet), NREL (National Renewable Energy Laboratory)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Reducing Idle Power Consumption in Office Spaces Saves U.S. Navy in Energy Costs As part of a two-year project to demonstrate energy efficiency measures, renewable energy generation, and energy systems integration, the National Renewable Energy Laboratory (NREL) has identified advanced plug load controls as a promising technology for reducing energy use and related costs in the U.S. Navy's Naval Facilities Engineering Command (NAVFAC) office spaces. The demonstration was one of eight

  11. Reducing Idle Power Consumption in Office Spaces Saves U.S. Navy in Energy Costs (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-04-01

    As part of a two-year project to demonstrate energy efficiency measures, renewable energy generation, and energy systems integration, the National Renewable Energy Laboratory (NREL) has identified advanced plug load controls as a promising technology for reducing energy use and related costs in the U.S. Navy's Naval Facilities Engineering Command (NAVFAC) office spaces.

  12. The genetic basis of energy conservation in the sulfate-reducing bacterium Desulfovibrio alaskensis G20

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Price, Morgan N.; Ray, Jayashree; Wetmore, Kelly M.; Kuehl, Jennifer V.; Bauer, Stefan; Deutschbauer, Adam M.; Arkin, Adam P.

    2014-10-31

    Sulfate-reducing bacteria play major roles in the global carbon and sulfur cycles, but it remains unclear how reducing sulfate yields energy. To determine the genetic basis of energy conservation, we measured the fitness of thousands of pooled mutants of Desulfovibrio alaskensis G20 during growth in 12 different combinations of electron donors and acceptors. We show that ion pumping by the ferredoxin:NADH oxidoreductase Rnf is required whenever substrate-level phosphorylation is not possible. The uncharacterized complex Hdr/flox-1 (Dde_1207:13) is sometimes important alongside Rnf and may perform an electron bifurcation to generate more reduced ferredoxin from NADH to allow further ion pumping. Similarly,more » during the oxidation of malate or fumarate, the electron-bifurcating transhydrogenase NfnAB-2 (Dde_1250:1) is important and may generate reduced ferredoxin to allow additional ion pumping by Rnf. During formate oxidation, the periplasmic [NiFeSe] hydrogenase HysAB is required, which suggests that hydrogen forms in the periplasm, diffuses to the cytoplasm, and is used to reduce ferredoxin, thus providing a substrate for Rnf. We found that during hydrogen utilization, the transmembrane electron transport complex Tmc is important and may move electrons from the periplasm into the cytoplasmic sulfite reduction pathway. Finally, mutants of many other putative electron carriers have no clear phenotype, which suggests that they are not important under our growth conditions, although we cannot rule out genetic redundancy.« less

  13. India's pulp and paper industry: Productivity and energy efficiency

    SciTech Connect (OSTI)

    Schumacher, Katja

    1999-07-01

    Historical estimates of productivity growth in India's pulp and paper sector vary from indicating an improvement to a decline in the sector's productivity. The variance may be traced to the time period of study, source of data for analysis, and type of indices and econometric specifications used for reporting productivity growth. The authors derive both statistical and econometric estimates of productivity growth for this sector. Their results show that productivity declined over the observed period from 1973-74 to 1993-94 by 1.1% p.a. Using a translog specification the econometric analysis reveals that technical progress in India's pulp and paper sector has been biased towards the use of energy and material, while it has been capital and labor saving. The decline in productivity was caused largely by the protection afforded by high tariffs on imported paper products and other policies, which allowed inefficient, small plants to enter the market and flourish. Will these trends continue into the future, particularly where energy use is concerned? The authors examine the current changes in structure and energy efficiency undergoing in the sector. Their analysis shows that with liberalization of the sector, and tighter environmental controls, the industry is moving towards higher efficiency and productivity. However, the analysis also shows that because these improvements are being hampered by significant financial and other barriers the industry might have a long way to go.

  14. China's Top-1000 Energy-Consuming Enterprises Program:Reducing Energy Consumption of the 1000 Largest Industrial Enterprises in China

    SciTech Connect (OSTI)

    Price, Lynn; Price, Lynn; Wang, Xuejun; Yun, Jiang

    2008-06-02

    In 2005, the Chinese government announced an ambitious goal of reducing energy consumption per unit of GDP by 20% between 2005 and 2010. One of the key initiatives for realizing this goal is the Top-1000 Energy-Consuming Enterprises program. The energy consumption of these 1000 enterprises accounted for 33% of national and 47% of industrial energy usage in 2004. Under the Top-1000 program, 2010 energy consumption targets were determined for each enterprise. The objective of this paper is to evaluate the program design and initial results, given limited information and data, in order to understand the possible implications of its success in terms of energy and carbon dioxide emissions reductions and to recommend future program modifications based on international experience with similar target-setting agreement programs. Even though the Top-1000 Program was designed and implemented rapidly, it appears that--depending upon the GDP growth rate--it could contribute to somewhere between approximately 10% and 25% of the savings required to support China's efforts to meet a 20% reduction in energy use per unit of GDP by 2010.

  15. New Water Booster Pump System Reduces Energy Consumption by 80 Percent and Increases Reliability

    Office of Energy Efficiency and Renewable Energy (EERE)

    This case study outlines how General Motors (GM) developed a highly efficient pumping system for their Pontiac Operations Complex in Pontiac, Michigan. In short, GM was able to replace five original 60- to 100-hp pumps with three 15-hp pumps whose speed could be adjusted to meet plant requirements. As a result, the company reduced pumping system energy consumption by 80 percent (225,100 kWh per year), saving an annual $11,255 in pumping costs. With a capital investment of $44,966 in the energy efficiency portion of their new system, GM projected a simple payback of 4 years.

  16. Productivity genefits from new energy technology: A case study of a paint manufacturing company

    SciTech Connect (OSTI)

    Raghunathan, P.; Capehart, B.L.

    1997-06-01

    In many cases, implementing new energy efficiency technologies not only helps facilities reduce their energy costs, but it also creates greater profits by increasing productivity. These added benefits from productivity improvements can sometimes be greater than the energy cost savings, and can result in an attractive overall payback period for implementing the new technology. This paper presents a case study of productivity improvement at a paint manufacturing company as a result of implementing new energy efficiency technology. During an industrial energy assessment, it was noted that the company had experienced frequent failures of motor belts and sheaves on five paint mixers resulting in significant replacement costs and labor costs. In addition, a bigger loss was being suffered due to lost potential profit associated with the frequent work stoppages. The IAC recommendation was to install motor soft starters (also known as motor voltage controllers) on the five mixing machines. Installation of soft starters would have the following benefits: lower energy costs, lower replacement costs for transmission components, lower labor costs, and higher production levels and increased profits. The total annual benefits were estimated at $122,659, of which the benefits from increased productivity were nearly $67,000. The overall simple payback period for installing the soft starters was less than 2 months.

  17. ENERGY PRODUCTIVITY OF THE HIGH VELOCITY ALGAE RACEWAY INTEGRATED DESIGN (ARID-HV)

    SciTech Connect (OSTI)

    Attalah, Said; Waller, Peter; Khawam, G.; Ryan, Randy; Huesemann, Michael H.

    2015-01-31

    The original Algae Raceway Integrated Design (ARID) raceway was an effective method to increase algae culture temperature in open raceways. However, the energy input was high and flow mixing was poor. Thus, the High Velocity Algae Raceway Integrated Design (ARID-HV) raceway was developed to reduce energy input requirements and improve flow mixing in a serpentine flow path. A prototype ARID-HV system was installed in Tucson, Arizona. Based on algae growth simulation and hydraulic analysis, an optimal ARID-HV raceway was designed, and the electrical energy input requirement (kWh ha-1 d-1) was calculated. An algae growth model was used to compare the productivity of ARIDHV and conventional raceways. The model uses a pond surface energy balance to calculate water temperature as a function of environmental parameters. Algae growth and biomass loss are calculated based on rate constants during day and night, respectively. A 10 year simulation of DOE strain 1412 (Chlorella sorokiniana) showed that the ARID-HV raceway had significantly higher production than a conventional raceway for all months of the year in Tucson, Arizona. It should be noted that this difference is species and climate specific and is not observed in other climates and with other algae species. The algae growth model results and electrical energy input evaluation were used to compare the energy productivity (algae production rate/energy input) of the ARID-HV and conventional raceways for Chlorella sorokiniana in Tucson, Arizona. The energy productivity of the ARID-HV raceway was significantly greater than the energy productivity of a conventional raceway for all months of the year.

  18. Response Surface Energy Modeling of an Electric Vehicle over a Reduced Composite Drive Cycle

    SciTech Connect (OSTI)

    Jehlik, Forrest; LaClair, Tim J.

    2014-04-01

    Response surface methodology (RSM) techniques were applied to develop a predictive model of electric vehicle (EV) energy consumption over the Environmental Protection Agency's (EPA) standardized drive cycles. The model is based on measurements from a synthetic composite drive cycle. The synthetic drive cycle is a minimized statistical composite of the standardized urban (UDDS), highway (HWFET), and US06 cycles. The composite synthetic drive cycle is 20 minutes in length thereby reducing testing time of the three standard EPA cycles by over 55%. Vehicle speed and acceleration were used as model inputs for a third order least squared regression model predicting vehicle battery power output as a function of the drive cycle. The approach reduced three cycles and 46 minutes of drive time to a single test of 20 minutes. Application of response surface modeling to the synthetic drive cycle is shown to predict energy consumption of the three EPA cycles within 2.6% of the actual measured values. Additionally, the response model may be used to predict energy consumption of any cycle within the speed/acceleration envelope of the synthetic cycle. This technique results in reducing test time, which additionally provides a model that may be used to expand the analysis and understanding of the vehicle under consideration.

  19. Hydrogen production and delivery analysis in US markets : cost, energy and greenhouse gas emissions.

    SciTech Connect (OSTI)

    Mintz, M.; Gillette, J.; Elgowainy, A.

    2009-01-01

    Hydrogen production cost conclusions are: (1) Steam Methane Reforming (SMR) is the least-cost production option at current natural gas prices and for initial hydrogen vehicle penetration rates, at high production rates, SMR may not be the least-cost option; (2) Unlike coal and nuclear technologies, the cost of natural gas feedstock is the largest contributor to SMR production cost; (3) Coal- and nuclear-based hydrogen production have significant penalties at small production rates (and benefits at large rates); (4) Nuclear production of hydrogen is likely to have large economies of scale, but because fixed O&M costs are uncertain, the magnitude of these effects may be understated; and (5) Given H2A default assumptions for fuel prices, process efficiencies and labor costs, nuclear-based hydrogen is likely to be more expensive to produce than coal-based hydrogen. Carbon taxes and caps can narrow the gap. Hydrogen delivery cost conclusions are: (1) For smaller urban markets, compressed gas delivery appears most economic, although cost inputs for high-pressure gas trucks are uncertain; (2) For larger urban markets, pipeline delivery is least costly; (3) Distance from hydrogen production plant to city gate may change relative costs (all results shown assume 100 km); (4) Pipeline costs may be reduced with system 'rationalization', primarily reductions in service pipeline mileage; and (5) Liquefier and pipeline capital costs are a hurdle, particularly at small market sizes. Some energy and greenhouse gas Observations: (1) Energy use (per kg of H2) declines slightly with increasing production or delivery rate for most components (unless energy efficiency varies appreciably with scale, e.g., liquefaction); (2) Energy use is a strong function of production technology and delivery mode; (3) GHG emissions reflect the energy efficiency and carbon content of each component in a production-delivery pathway; (4) Coal and natural gas production pathways have high energy consumption

  20. Material and Energy Flows in the Production of Cathode and Anode...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Material and Energy Flows in the Production of Cathode and Anode Materials for Lithium Ion Batteries Title Material and Energy Flows in the Production of Cathode and Anode...

  1. Resource Assessment for Hydrogen Production: Hydrogen Production Potential from Fossil and Renewable Energy Resources

    SciTech Connect (OSTI)

    Melaina, M.; Penev, M.; Heimiller, D.

    2013-09-01

    This study examines the energy resources required to produce 4-10 million metric tonnes of domestic, low-carbon hydrogen in order to fuel approximately 20-50 million fuel cell electric vehicles. These projected energy resource requirements are compared to current consumption levels, projected 2040 business as usual consumptions levels, and projected 2040 consumption levels within a carbonconstrained future for the following energy resources: coal (assuming carbon capture and storage), natural gas, nuclear (uranium), biomass, wind (on- and offshore), and solar (photovoltaics and concentrating solar power). The analysis framework builds upon previous analysis results estimating hydrogen production potentials and drawing comparisons with economy-wide resource production projections

  2. Impacts on U.S. Energy Markets and the Economy of Reducing Oil Imports

    Reports and Publications (EIA)

    1996-01-01

    This study was undertaken at the request of the General Accounting Office (GAO). Its purpose is to evaluate the impacts on U.S. energy markets and the economy of reducing oil imports. The approach and assumptions underlying this report were specified by GAO and are attached as an Appendix. The study focuses on two approaches: (1) a set of cases with alternative world crude oil price trajectories and (2) two cases which investigate the use of an oil import tariff to achieve a target reduction in the oil imports. The analysis presented uses the National Energy Modeling System, which is maintained by the Office of Integrated Analysis and Forecasting within the Energy Information Administration (EIA), and the DRI/McGraw Hill Macroeconomic Model of the U.S. Economy, a proprietary model maintained by DRI and subscribed to by EIA.

  3. Covered Product Category: Exterior Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exterior Lighting Covered Product Category: Exterior Lighting The Federal Energy Management Program (FEMP) provides acquisition guidance and Federal efficiency requirements for outdoor wall-mounted light fixtures or luminaires, outdoor pole/arm-mounted area and roadway luminaires, outdoor pole/arm-mounted decorative luminaires, fuel pump canopy luminaires, bollards, and parking garage luminaires, all of which are FEMP-designated product categories. Federal laws and requirements mandate that

  4. Purified Silicon Production and Depositing System - Energy Innovation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Portal Advanced Materials Advanced Materials Find More Like This Return to Search Purified Silicon Production and Depositing System National Renewable Energy Laboratory Contact NREL About This Technology Technology Marketing Summary Within the photovoltaic (PV) industry, the supply of the required metallurgical-grade (MG) Si feedstock at an acceptable cost is a pain point for manufacturers. One current method for the production and purification of this feedstock is the repetitive porous

  5. Alloys for Ethylene Production Furnaces - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Industrial Technologies Industrial Technologies Advanced Materials Advanced Materials Find More Like This Return to Search Alloys for Ethylene Production Furnaces Oak Ridge National Laboratory Contact ORNL About This Technology Technology Marketing SummaryEthylene production is one of the most energy intensive processes in the chemical industry, due to the decoking necessary to maintain ethylene furnace tubes. DescriptionOak Ridge National Laboratory and its industrial partners are developing

  6. Micro-scale energy valorization of grape marcs in winery production plants

    SciTech Connect (OSTI)

    Fabbri, Andrea; Bonifazi, Giuseppe; Serranti, Silvia

    2015-02-15

    Highlights: • BioMethane Potential of grape marcs was investigated. • Grape marcs were characterized to realize a micro-scale energy recovery. • Comparative BMP batch-tests utilizing lab-scale reactors were performed. • Biogas valorization by grape marcs anaerobic digestion at small scale is evaluated. - Abstract: The BiochemicalMethanePotential (BMP) of winery organic waste, with reference to two Italian red and white grapes (i.e. Nero Buono and Greco) by-products was investigated. The study was carried out to verify the possibility to reduce the production impact in a green-waste-management-chain-perspective. The possibility to efficiently utilize wine-related-by-products for energy production at a micro-scale (i.e. small-medium scale winery production plant) was also verified. Results showed as a good correlation can be established between the percentage of COD removal and the biogas production, as the winery can produce, from its waste methanization, about 7800 kW h year{sup −1} electrical and 8900 kW h year{sup −1} thermal. A critical evaluation was performed about the possibility to utilize the proposed approach to realize an optimal biomass waste management and an energetic valorization in a local-energy-production-perspective.

  7. Increasing the power density when using inert matrix fuels to reduce production of transuranics

    SciTech Connect (OSTI)

    Recktenwald, G.D.; Deinert, M.R.

    2013-07-01

    Reducing the production of transuranics is a goal of most advanced nuclear fuel cycles. One way to do this is to recycle the transuranics into the same reactors that are currently producing them using an inert matrix fuel. In previous work we have modeled such a reactor where 72%, of the core is comprised of standard enriched uranium fuel pins, with the remaining 28% fuel made from Yttria stabilized zirconium, in which transuranics are loaded. A key feature of this core is that all of the transuranics produced by the uranium fuel assemblies are later burned in inert matrix fuel assemblies. It has been shown that this system can achieve reductions in transuranic waste of more than 86%. The disadvantage of such a system is that the core power rating must be significantly lower than a standard pressurized water reactor. One reason for the lower power is that high burnup of the uranium fuel precludes a critical level of reactivity at the end of the campaign. Increasing the uranium enrichment and changing the pin pitch are two ways to increase burnup while maintaining criticality. In this paper we use MCNPX and a linear reactivity model to quantify the effect of these two parameters on the end of campaign reactivity. Importantly, we show that in the region of our proposed reactor, enrichment increases core reactivity by 0.02 per percent uranium 235 and pin pitch increases reactivity by 0.02 per mm. Reactivity is lost at a rate of 0.005 per MWd/kgIHM uranium burnup. (authors)

  8. Energy Savings Week: Standards for Kitchen and Laundry Products Create Big

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Savings | Department of Energy Standards for Kitchen and Laundry Products Create Big Savings Energy Savings Week: Standards for Kitchen and Laundry Products Create Big Savings December 17, 2015 - 1:14pm Addthis Energy Savings Week: Standards for Kitchen and Laundry Products Create Big Savings Energy Savings Week: Standards for Kitchen and Laundry Products Create Big Savings Energy Savings Week: Standards for Kitchen and Laundry Products Create Big Savings Energy Savings Week: Standards for

  9. Product Standards Team Saves American Consumers Energy, Money

    Broader source: Energy.gov [DOE]

    The latest issue of EERE's Amped Up! magazine takes a closer look at the standards developed for home and work products – ranging from light bulbs, to kitchen appliances, to laundry equipment, to heating and cooling systems – that are saving Americans more energy and money every year.

  10. Calendar Year 2007 Program Benefits for ENERGY STAR Labeled Products

    SciTech Connect (OSTI)

    Sanchez, Marla Christine; Homan, Gregory; Brown, Richard

    2008-10-31

    ENERGY STAR is a voluntary energy efficiency-labeling program operated jointly by the United States Department of Energy and the United States Environmental Protection Agency (US EPA). Since the program inception in 1992, ENERGY STAR has become a leading international brand for energy efficient products. ENERGY STAR's central role in the development of regional, national, and international energy programs necessitates an open process whereby its program achievements to date as well as projected future savings are shared with committed stakeholders. Through 2007, the program saved 7.1 Quads of primary energy and avoided 128 MtC equivalent. The forecast shows that the program is expected to save 21.2 Quads of primary energy and avoid 375 MtC equivalent over the period 2008-2015. The sensitivity analysis bounds the best estimate of carbon avoided between 84 MtC and 172 MtC (1993 to 2007) and between 243 MtC and 519 MtC (2008 to 2015).

  11. High Tonnage Forest Biomass Production Systems from Southern Pine Energy Plantations

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    03.25.2015 Technology Area Review: Terrestrial Feedstocks Principal Investigator: Steve Taylor Organization: Auburn University This presentation does not contain any proprietary, confidential, or otherwise restricted information High Tonnage Forest Biomass Production Systems from Southern Pine Energy Plantations DOE Bioenergy Technologies Office (BETO) 2015 Project Peer Review Project Goals * Design and deploy machines and systems that can reduce delivered cost of woody biomass. - Design and

  12. Volume, cost and energy for the production of gasoline

    SciTech Connect (OSTI)

    Cortes-Islas, E.M.; Ramirez-Garcia, P.F. )

    1988-06-01

    The relationship between the growth of the petrochemical industry and increasing standards of living is well known. However, a detailed analysis of the lower energy consumption that characterizes oil-based products when compared to the equivalent traditional products, used, for instance, in the automobile, textile and construction industries, has not yet been carried out. This paper models the chemical processing industries. The information obtained with this approach permits the structuring of a technical data bank in such a way that the decision maker is able to choose between new processes or the development of existing ones. The model is illustrated with the processes involved in the production of gasoline obtained from crude oil remarking volume, cost and consumption of energy.

  13. Integrated PEV Charging Solutions and Reduced Energy for Occupant Comfort (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2012-01-01

    Brochure on Vehicle Testing and Integration Facility, featuring the Vehicle Modification Facility, Vehicle Test Pad and ReCharge Integrated Demonstration System. Plug-in electric vehicles (PEVs) offer the opportunity to shift transportation energy demands from petroleum to electricity, but broad adoption will require integration with other systems. While automotive experts work to reduce the cost of PEVs, fossil fueled cars and trucks continue to burn hundreds of billions of gallons of petroleum each year - not only to get from point A to point B, but also to keep passengers comfortable with air conditioning and heat. At the National Renewable Energy Laboratory (NREL), three installations form a research laboratory known as the Vehicle Testing and Integration Facility (VTIF). At the VTIF, engineers are developing strategies to address two separate but equally crucial areas of research: meeting the demands of electric vehicle-grid integration and minimizing fuel consumption related to vehicle climate control. Part of NREL's Center for Transportation Technologies and Systems (CTTS), the VTIF is dedicated to renewable and energy efficient solutions. This facility showcases technology and systems designed to increase the viability of sustainably powered vehicles. NREL researchers instrument every class of on-road vehicle, conduct hardware and software validation for electric vehicle (EV) components and accessories, and develop analysis tools and technology for the Department of Energy, other government agencies and industry partners. Research conducted at the VTIF examines the interaction of building energy systems, utility grids, renewable energy sources and PEVs, integrating energy management solutions, and maximizing potential greenhouse gas (GHG) reduction, while smoothing the transition and reducing costs for EV owners. NREL's collaboration with automakers, charging station manufacturers, utilities and fleet operators to assess technologies using VTIF resources is

  14. Energy Conservation Program for Consumer Products: Test Procedures for Furnaces and Boilers, Comment Period Extension

    Broader source: Energy.gov [DOE]

    Energy Conservation Program for Consumer Products: Test Procedures for Furnaces and Boilers, Comment Period Extension

  15. Energy baseline and energy efficiency resource opportunities for the Forest Products Laboratory, Madison, Wisconsin

    SciTech Connect (OSTI)

    Mazzucchi, R.P.; Richman, E.E.; Parker, G.B.

    1993-08-01

    This report provides recommendations to improve the energy use efficiency at the Forest Products Laboratory in Madison, Wisconsin. The assessment focuses upon the four largest buildings and central heating plant at the facility comprising a total of approximately 287,000 square feet. The analysis is comprehensive in nature, intended primarily to determine what if any energy efficiency improvements are warranted based upon the potential for cost-effective energy savings. Because of this breadth, not all opportunities are developed in detail; however, baseline energy consumption data and energy savings concepts are described to provide a foundation for detailed investigation and project design where warranted.

  16. Potential of Renewable Energy to Reduce the Dependence of the State of Hawaii on Oil

    SciTech Connect (OSTI)

    Arent, D.; Barnett, J.; Mosey, G.; Wise, A.

    2009-01-01

    Deriving nearly 90% of its primary energy resources from oil, the State of Hawaii is more dependent on oil than any other U.S. state. The price of electricity in Hawaii is also more than twice the U.S. average. The Energy Policy Act of 2005 directed assessment of the economic implications of Hawaii's oil dependence and the feasibility of using renewable energy to help meet the state's electrical generation and transportation fuel use. This paper is based on the assessments and report prepared in response to that directive.Current total installed electrical capacity for the State of Hawaii is 2,414 MWe, 83% of which is fuel-oil generated, but already including about 170 MWe of renewable capacity. The assessments identified about 2,133 MWe (plus another estimated 2,000 MWe of rooftop PV systems) of potential new renewable energy capacity. Most notable, in addition to the rooftop solar potential, is 750 MWe and 140 MWe of geothermal potential on Hawaii and Maui, respectively, 840 MWe of potential wind capacity, primarily on Lanai and Molokai, and one potential 285 MWe capacity specific solar project (PV or solar thermal) identified on Kauai. Important social, political, and electrical-grid infrastructure challenges would need to be overcome to realize this potential. Among multiple crop and acreage scenarios, biofuels assessment found 360,000 acres in Hawaii zoned for agriculture and appropriate for sugarcane, enough to produce 429 million gallons of ethanol-enough to meet about 64% of current 2005 Hawaiian gasoline use. Tropical oil seed crops-potentially grown on the same land-might meet a substantial portion of current diesel use, but there has been little experience growing such crops in Hawaii. The U.S. Department of Energy and the State of Hawaii initiated in January 2008 a program that seeks to reduce Hawaii's oil dependence and provide 70% of the state's primary energy from clean energy sources by 2030. The Hawaii Clean Energy Initiative (HCEI) activities will

  17. New Energy Star Initiative Recognizes Cutting-Edge Products with Highest

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Efficiency | Department of Energy Star Initiative Recognizes Cutting-Edge Products with Highest Energy Efficiency New Energy Star Initiative Recognizes Cutting-Edge Products with Highest Energy Efficiency July 14, 2011 - 12:00am Addthis WASHINGTON - The U.S. Environmental Protection Agency (EPA) and U.S. Department of Energy (DOE) today are announcing for the first time products recognized as the most energy-efficient in their categories among those that have earned the Energy Star

  18. AMO's New Institute for Advanced Composites Manufacturing Innovation Will Focus on Reducing Energy Use

    Broader source: Energy.gov [DOE]

    The Institute for Advanced Composites Manufacturing Innovation announced by President Obama today is a public-private consortium of 122 leading U.S. manufacturers, universities, and non-profits that will focus on advanced composites—materials that are three times as strong and twice as light as the lightest metals. These advanced materials have the potential to transform products ranging from wind turbines to automobiles. This new Innovation Institute, headquartered in Knoxville, Tennessee and led by the University of Tennessee, will receive $70 million in federal funding provided by the U.S. Department of Energy's Advanced Manufacturing Office.

  19. Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy, is a notice issued by the Department of Energy. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document."

  20. Technology diffusion of energy-related products in residential markets

    SciTech Connect (OSTI)

    Davis, L.J.; Bruneau, C.L.

    1987-05-01

    Acceptance of energy-related technologies by end residential consumers, manufacturers of energy-related products, and other influential intermediate markets such as builders will influence the potential for market penetration of innovative energy-related technologies developed by the Department of Energy, Office of Building and Community Systems (OBCS). In this report, Pacific Northwest Laboratory reviewed the available information on technology adoption, diffusion, and decision-making processes to provide OBCS with a background and understanding of the type of research that has previously been conducted on this topic. Insight was gained as to the potential decision-making criteria and motivating factors that influence the decision-maker(s) selection of new technologies, and some of the barriers to technology adoption faced by potential markets for OBCS technologies.

  1. Strategies to reduce end-product inhibition in family 48 glycoside...

    Office of Scientific and Technical Information (OSTI)

    Subject: 09 BIOMASS FUELS; 59 BASIC BIOLOGICAL SCIENCES glycoside hydrolases; product inhibition; biofuels; cellulose; molecular dynamics Word Cloud More Like This Free Publicly ...

  2. A NEW METHOD FOR LOW-COST PRODUCTION OF TITANIUM ALLOYS FOR REDUCING...

    Broader source: Energy.gov (indexed) [DOE]

    A novel metallurgical process for producing titanium (Ti) components could produce a ... PDF icon A New Method for Low-Cost Production of Titanium Alloys More Documents & ...

  3. Sell Energy-Efficient Products: A Guide for Selling to the U.S. Government

    Broader source: Energy.gov [DOE]

    The Federal Energy Management Program’s (FEMP's) Sell Energy-Efficient Products fact sheet shows manufacturers and vendors how to increase sales potential by helping federal purchasers meet their energy-efficient product purchasing requirements.

  4. The great ``retail wheeling`` illusion, and more productive energy futures

    SciTech Connect (OSTI)

    Cavanagh, R.

    1994-12-31

    This paper sets out the reasons why many environmental and public interest organizations oppose retail wheeling. Cavanagh argues that retail wheeling would destroy incentives for energy efficiency improvements and renewable energy generation--benefits that reduce long-term energy service costs to society as a whole. The current debate over the competitive restructuring of the electric power industry is critical from both economic and environmental perspectives. All attempts to introduce broad-scale retail wheeling in the United States have failed; instead, state regulators are choosing a path that emphasizes competition and choice, but acknowledges fundamental differences between wholesale and retail markets. Given the physical laws governing the movement of power over centrally controlled grids, the choice offered to customers through retail wheeling of electricity is a fiction -- a re-allocation of costs is all that is really possible. Everyone wants to be able to claim the cheapest electricity on the system; unfortunately, there is not enough to go around. By endorsing the fiction of retail wheeling for certain types of customers, regulators would be recasting the retail electricity business as a kind of commodity exchange. That would reward suppliers who could minimize near-term unit costs of electricity while simultaneously destroying incentives for many investments, including cost-effective energy efficiency improvements and renewable energy generation, that reduce long-term energy service costs to society as a whole. This result, which has been analogized unpersuasively to trends in telecommunications and natural gas regulation, is neither desirable nor inevitable. States should go on saying no to retail wheeling in order to be able to create something better: regulatory reforms that align utility and societal interests in pursuing a least-cost energy future. An appendix contains notes on some recent Retail Wheeling Campaigns.

  5. How To Buy Energy- and Water-Efficient Products for the Federal Government

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy How To Buy Energy- and Water-Efficient Products for the Federal Government How To Buy Energy- and Water-Efficient Products for the Federal Government The requirement to buy energy- and water-efficient products applies to federal purchases made through any procurement pathway (e.g., purchase cards, e-retailers, and solicitations) and to a wide variety of federal projects. The Federal Energy Management Program's (FEMP's) Buy Energy-Efficient Products buyer overview fact

  6. Utilization of accelerators for transmutation and energy production

    SciTech Connect (OSTI)

    Sheffield, Richard L

    2010-09-24

    Given the increased concern over reliable, emission-free power, nuclear power has experienced a resurgence of interest. A sub-critical accelerator driven system (ADS) can drive systems that have either safety constraints (waste transmutation) or reduced fissile content (thorium reactor). The goals of ADS are some or all of the following: (1) to significantly reduce the generation or impacts due to the minor actinides on the packing density and long-term radiotoxicity in the repository design, (2) preserve/use the energy-rich component of used nuclear fuel, and (3) reduce proliferation risk. ADS systems have been actively studied in Europe and Asia over the past two decades and renewed interest is occurring in the U.S. This talk will cover some of the history, possible applicable fuel cycle scenarios, and general issues to be considered in implementing ADS systems.

  7. Over-compression, a method to shape the longitudinal bunch distribution for a reduced energy spread

    SciTech Connect (OSTI)

    Decker, F.J.; Holtzapple, R.; Raubenheimer, T.

    1994-07-01

    In the Stanford Linear Collider the energy spread of the bunches at the end of the linac is dominated by longitudinal wakefields. A short, high current bunch with a Gaussian shape will produce a double-horned energy distribution. It can be shown that certain charge distributions with a sharp rise time (about rectangular or half-Gaussian) will give no additional energy spread due to the linac, since the generated wakefield and the rf-curvature cancel each other exactly. In this paper different methods are presented on how to achieve such distributions by using non-linear dependences in the RTL (Ring-To-Linac) compression region. A simple and effective method to achieve such a distribution is by over-compression. When not fully compressing the bunch, there are two settings of the compressor voltage, under and over-compression, which give the same core bunch length in the linac. By switching from the under to the over-compressed setting, the tails are reduced from more than Gaussian to less than Gaussian beam tails. This results in a roughly rectangular shape which will give the wakefield-rf cancellation. Simulations, measurements and their implications are discussed.

  8. Catalytic reactive separation system for energy-efficient production of cumene

    DOE Patents [OSTI]

    Buelna, Genoveva; Nenoff, Tina M.

    2009-07-28

    The present invention relates to an atmospheric pressure, reactive separation column packed with a solid acid zeolite catalyst for producing cumene from the reaction of benzene with propylene. Use of this un-pressurized column, where simultaneous reaction and partial separation occur during cumene production, allow separation of un-reacted, excess benzene from other products as they form. This high-yielding, energy-efficient system allows for one-step processing of cumene, with reduced need for product purification. Reacting propylene and benzene in the presence of beta zeolite catalysts generated a selectivity greater than 85% for catalytic separation reactions at a reaction temperature of 115 degrees C and at ambient pressure. Simultaneously, up to 76% of un-reacted benzene was separated from the product; which could be recycled back to the reactor for re-use.

  9. Geothermal Energy Production With Innovative Methods Of Geothermal Heat Recovery

    SciTech Connect (OSTI)

    Swenson, Allen; Darlow, Rick; Sanchez, Angel; Pierce, Michael; Sellers, Blake

    2014-12-19

    The ThermalDrive™ Power System (“TDPS”) offers one of the most exciting technological advances in the geothermal power generation industry in the last 30 years. Using innovations in subsurface heat recovery methods, revolutionary advances in downhole pumping technology and a distributed approach to surface power production, GeoTek Energy, LLC’s TDPS offers an opportunity to change the geothermal power industry dynamics.

  10. Milestone Reached: New Process Reduces Cost and Risk of Biofuel Production from Bio-Oil Upgrading

    Broader source: Energy.gov [DOE]

    Battellea nonprofit research and development organization that operates many of the national laboratoriesreached an Energy Department project milestone to demonstrate at least 1,000 hours of bio...

  11. Anaerobic digestion for energy production and environmental protection

    SciTech Connect (OSTI)

    Lettinga, G.; Haandel, A.C. Vaan

    1993-12-31

    Anaerobic digestion is the decomposition of complex molecules into simpler substances by micro-organisms in the absence of oxygen. Anaerobic digestion processes can be employed for resource conservation, for the production of biogas and other useful end products from biomass, and for environmental protection through waste and wastewater treatment. Modern high-rate anaerobic wastewater-treatment processes can effectively remove organic pollutants from wastewater at a cost far below that of conventional aerobic processes. These anaerobic wastewater treatment processes can also be profitably applied for the generation of biogas from energy crops such as sugarcane. In fact, these methods might even be an attractive alternative for the alcohol fermentation extensively employed in Brazil for the production of fuel alcohol from sugarcane. The potential of modern anaerobic processes for this purpose has not yet been widely recognized. This paper describes the principles and use of these processes and demonstrates their prospects for producing energy from sugarcane (1) by treating vinasse, the wastewater generated during the production of ethanol from sugarcane, and (2) as a direct method for producing biogas from sugarcane juice.

  12. Assessment of methods for hydrogen production using concentrated solar energy

    SciTech Connect (OSTI)

    Glatzmaier, G.; Blake, D.; Showalter, S.

    1998-01-01

    The purpose of this work was to assess methods for hydrogen production using concentrated solar energy. The results of this work can be used to guide future work in the application of concentrated solar energy to hydrogen production. Specifically, the objectives were to: (1) determine the cost of hydrogen produced from methods that use concentrated solar thermal energy, (2) compare these costs to those of hydrogen produced by electrolysis using photovoltaics and wind energy as the electricity source. This project had the following scope of work: (1) perform cost analysis on ambient temperature electrolysis using the 10 MWe dish-Stirling and 200 MWe power tower technologies; for each technology, sue two cases for projected costs, years 2010 and 2020 the dish-Stirling system, years 2010 and 2020 for the power tower, (2) perform cost analysis on high temperature electrolysis using the 200 MWe power tower technology and projected costs for the year 2020, and (3) identify and describe the key technical issues for high temperature thermal dissociation and the thermochemical cycles.

  13. Long-term affected energy production of waste to energy technologies identified by use of energy system analysis

    SciTech Connect (OSTI)

    Muenster, M.; Meibom, P.

    2010-12-15

    Affected energy production is often decisive for the outcome of consequential life-cycle assessments when comparing the potential environmental impact of products or services. Affected energy production is however difficult to determine. In this article the future long-term affected energy production is identified by use of energy system analysis. The focus is on different uses of waste for energy production. The Waste-to-Energy technologies analysed include co-combustion of coal and waste, anaerobic digestion and thermal gasification. The analysis is based on optimization of both investments and production of electricity, district heating and bio-fuel in a future possible energy system in 2025 in the countries of the Northern European electricity market (Denmark, Norway, Sweden, Finland and Germany). Scenarios with different CO{sub 2} quota costs are analysed. It is demonstrated that the waste incineration continues to treat the largest amount of waste. Investments in new waste incineration capacity may, however, be superseded by investments in new Waste-to-Energy technologies, particularly those utilising sorted fractions such as organic waste and refuse derived fuel. The changed use of waste proves to always affect a combination of technologies. What is affected varies among the different Waste-to-Energy technologies and is furthermore dependent on the CO{sub 2} quota costs and on the geographical scope. The necessity for investments in flexibility measures varies with the different technologies such as storage of heat and waste as well as expansion of district heating networks. Finally, inflexible technologies such as nuclear power plants are shown to be affected.

  14. Energy conservation in ethanol production from renewable resources and non-petroleum energy sources

    SciTech Connect (OSTI)

    Not Available

    1981-03-01

    The dry milling process for the conversion of grain to fuel ethanol is reviewed for the application of energy conservation technology, which will reduce the energy consumption to 70,000 Btu per gallon, a reduction of 42% from a distilled spirits process. Specific energy conservation technology applications are outlined and guidelines for the owner/engineer for fuel ethanol plants to consider in the selection on the basis of energy conservation economics of processing steps and equipment are provided. The process was divided into 5 sections and the energy consumed in each step was determined based on 3 sets of conditions; a conventional distilled spirits process; a modern process incorporating commercially proven energy conservation; and a second generation process incorporating advanced conservation technologies which have not yet been proven. Steps discussed are mash preparation and cooking, fermentation, distillation, and distillers dried grains processing. The economics of cogeneration of electricity on fuel ethanol plants is also studied. (MCW)

  15. Quasi-particle energy spectra in local reduced density matrix functional theory

    SciTech Connect (OSTI)

    Lathiotakis, Nektarios N.; Helbig, Nicole; Rubio, Angel

    2014-10-28

    Recently, we introduced [N. N. Lathiotakis, N. Helbig, A. Rubio, and N. I. Gidopoulos, Phys. Rev. A 90, 032511 (2014)] local reduced density matrix functional theory (local RDMFT), a theoretical scheme capable of incorporating static correlation effects in Kohn-Sham equations. Here, we apply local RDMFT to molecular systems of relatively large size, as a demonstration of its computational efficiency and its accuracy in predicting single-electron properties from the eigenvalue spectrum of the single-particle Hamiltonian with a local effective potential. We present encouraging results on the photoelectron spectrum of molecular systems and the relative stability of C{sub 20} isotopes. In addition, we propose a modelling of the fractional occupancies as functions of the orbital energies that further improves the efficiency of the method useful in applications to large systems and solids.

  16. DOE Announces Webinars on Reducing Energy Use in Buildings, Integrating Bioenergy into the Classroom, and More

    Broader source: Energy.gov [DOE]

    EERE offers webinars to the public on a range of subjects, from adopting the latest energy efficiency and renewable energy technologies, to training for the clean energy workforce.

  17. Building Commissioning: A Golden Opportunity for Reducing Energy Costs and Greenhouse-gas Emissions

    SciTech Connect (OSTI)

    Mills, Evan

    2009-07-16

    available revealed over 10,000 energy-related problems, resulting in 16% median whole-building energy savings in existing buildings and 13% in new construction, with payback time of 1.1 years and 4.2 years, respectively. In terms of other cost-benefit indicators, median benefit-cost ratios of 4.5 and 1.1, and cash-on-cash returns of 91% and 23% were attained for existing and new buildings, respectively. High-tech buildings were particularly cost-effective, and saved higher amounts of energy due to their energy-intensiveness. Projects with a comprehensive approach to commissioning attained nearly twice the overall median level of savings and five-times the savings of the least-thorough projects. It is noteworthy that virtually all existing building projects were cost-effective by each metric (0.4 years for the upper quartile and 2.4 years for the lower quartile), as were the majority of new-construction projects (1.5 years and 10.8 years, respectively). We also found high cost-effectiveness for each specific measure for which we have data. Contrary to a common perception, cost-effectiveness is often achieved even in smaller buildings. Thanks to energy savings valued more than the cost of the commissioning process, associated reductions in greenhouse gas emissions come at 'negative' cost. In fact, the median cost of conserved carbon is negative - -$110 per tonne for existing buildings and -$25/tonne for new construction - as compared with market prices for carbon trading and offsets in the +$10 to +$30/tonne range. Further enhancing the value of commissioning, its non-energy benefits surpass those of most other energy-management practices. Significant first-cost savings (e.g., through right-sizing of heating and cooling equipment) routinely offset at least a portion of commissioning costs - fully in some cases. When accounting for these benefits, the net median commissioning project cost was reduced by 49% on average, while in many cases they exceeded the direct value of the

  18. The potential for reducing urban air temperatures and energy consumption through vegetative cooling

    SciTech Connect (OSTI)

    Kurn, D.M.; Bretz, S.E.; Huang, B.; Akbari, H.

    1994-05-01

    A network of 23 weather stations was used to detect existing oases in Southern California. Four stations, separated from one another by 15--25 miles (24--40 km), were closely examined. Data were strongly affected by the distance of the stations from the Pacific Ocean. This and other city-scale effects made the network inadequate for detection of urban oases. We also conducted traverse measurements of temperature and humidity in the Whittier Narrows Recreation Area in Los Angeles County on September 8--10, 1993. Near-surface air temperatures over vegetated areas were 1--2{degrees}C lower than background air temperatures. We estimate that vegetation may lower urban temperatures by 1{degrees}C, while the establishment of vegetative canopies may lower local temperatures by an additional 2{degrees}C. An increase in vegetation in residential neighborhoods may reduce peak loads in the Los Angeles area by 0.3 GW, and reduce energy consumption by 0.2 BkWh/year, saving $20 million annually. Large additional savings would result from regional cooling.

  19. Reduced temperature aluminum production in an electrolytic cell having an inert anode

    DOE Patents [OSTI]

    Dawless, Robert K.; Ray, Siba P.; Hosler, Robert B.; Kozarek, Robert L.; LaCamera, Alfred F.

    2000-01-01

    Aluminum is produced by electrolytic reduction of alumina in a cell having a cathode, an inert anode and a molten salt bath containing metal fluorides and alumina. The inert anode preferably contains copper, silver and oxides of iron and nickel. Reducing the molten salt bath temperature to about 900-950.degree. C. lowers corrosion on the inert anode constituents.

  20. White Paper on Energy Efficiency Status of Energy-Using Products in China (2012)

    SciTech Connect (OSTI)

    Zhou, Nan; Romankiewicz, John; Fridley, David

    2012-06-01

    2011 is the first year of the 12th Five-Year Plan and, as such, it is a crucial year to push forward the work of energy conservation and emissions reduction. Important large-scale energy conservation policies issued in 2011 include Outline of the 12th Five-year Plan for National Economic and Social Development of The People’s Republic of China (the “Plan”) and Notice of the State Council on Issuing the Comprehensive Work Proposal for Energy Conservation and Emission Reduction during the 12th Five-Year Plan Period (GF (2011) No. 26) (the “Proposal”). These two policies have established strategic objectives for energy conservation during the 12th Five-Year Plan in China, and they have also identified the key tasks and direction of energy efficiency programs for energy-using products.

  1. How Do You Reduce the Amount of Energy Used by Your Televisions...

    Energy Savers [EERE]

    The New EnergySaver.gov -- Save Money by Saving Energy Did you know: Water heaters account for nearly 17 percent of a home's energy use, consuming more energy than all other ...

  2. The Statistical Evolution of Multiple Generations of Oxidation Products in the Photochemical Aging of Chemically Reduced Organic Aerosol

    SciTech Connect (OSTI)

    Wilson, Kevin R.; Smith, Jared D.; Kessler, Sean; Kroll, Jesse H.

    2011-10-03

    The heterogeneous reaction of hydroxyl radicals (OH) with squalane and bis(2-ethylhexyl) sebacate (BES) particles are used as model systems to examine how distributions of reactionproducts evolve during the oxidation of chemically reduced organic aerosol. A kinetic model of multigenerational chemistry, which is compared to previously measured (squalane) and new(BES) experimental data, reveals that it is the statistical mixtures of different generations of oxidation products that control the average particle mass and elemental composition during thereaction. The model suggests that more highly oxidized reaction products, although initially formed with low probability, play a large role in the production of gas phase reaction products.In general, these results highlight the importance of considering atmospheric oxidation as a statistical process, further suggesting that the underlying distribution of molecules could playimportant roles in aerosol formation as well as in the evolution of key physicochemical properties such as volatility and hygroscopicity.

  3. Demonstration of On-Farm Production of a Dedicated Energy Crop...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Demonstration of On-Farm Production of a Dedicated Energy Crop incorporating Multiple ... varietal trials and plots for demonstration of switchgrass production using ...

  4. Coupled Physical/Chemical and Biofiltration Technologies to Reduce Air Emissions from Forest Products Industries

    SciTech Connect (OSTI)

    Gary D. McGinnis

    2001-12-31

    The research is a laboratory and bench-scale investigation of a system to concentrate and destroy volatile organic compounds (VOCs), including hazardous air pollutants, formed from the drying of wood and the manufacture of wood board products (e.g., particle board and oriented strandboard). The approach that was investigated involved concentrating the dilute VOCs (<500 ppmv) with a physical/chemical adsorption unit, followed by the treatment of the concentrated voc stream (2,000 to 2,500 ppmv) with a biofiltration unit. The research program lasted three years, and involved three research organizations. Michigan Technological University was the primary recipient of the financial assistance, the USDA Forest Products Laboratory (FPL) and Mississippi State University (MSU) were subcontractors to MTU. The ultimate objective of this research was to develop a pilot-scale demonstration of the technology with sufficient data to provide for the design of an industrial system. No commercialization activities were included in this project.

  5. Material and Energy Flows in the Production of Cathode and Anode...

    Office of Scientific and Technical Information (OSTI)

    and Energy Flows in the Production of Cathode and Anode Materials for Lithium Ion Batteries Citation Details In-Document Search Title: Material and Energy Flows in the ...

  6. Ford Van Dyke: Compressed Air Management Program Leads to Improvements that Reduce Energy Consumption at an Automotive Transmission Plant

    SciTech Connect (OSTI)

    2010-06-25

    Staff at the Ford Van Dyke Transmission Plant in Sterling Heights, Michigan, have increased the efficiency of the plant’s compressed air system to enhance its performance while saving energy and improving production.

  7. DOE Announces $27 Million to Reduce Costs of Solar Energy Projects,

    Office of Environmental Management (EM)

    Energy Alaska Native Village Renewable Energy Workshop Agenda DOE Alaska Native Village Renewable Energy Workshop Agenda Download the agenda for the DOE Alaska Native Village Renewable Energy Workshop entitled "Renewable Energy and Energy Efficiency for Alaska Native Community Development" being held October 16-17, 2012, in Anchorage, Alaska. TEP AK Workshop Agenda 10-4-2012.pdf (83.86 KB) More Documents & Publications Alaska Native Village Energy Development Workshop Office of

  8. Proliferation Risks of Magneetic Fusion Energy: Clandestine Production, Covert Production and Breakout

    SciTech Connect (OSTI)

    A. Glaser and R.J. Goldston

    2012-03-13

    Nuclear proliferation risks from magnetic fusion energy associated with access to weapon-usable materials can be divided into three main categories: (1) clandestine production of weapon-usable material in an undeclared facility, (2) covert production of such material inn a declared facility, and (3) use of a declared facility in a breakout scenario, in which a state begins production of fissile material without concealing the effort. In this paper we address each of these categories of risks from fusion. For each case, we find that the proliferation risk from fusion systems can be much lower than the equivalent risk from fission systems, if the fusion system is designed to accommodate appropriate safeguards.

  9. EERE Success Story—Illinois: High-Energy, Concentration-Gradient Cathode Material for Plug-in Hybrids and All-Electric Vehicles Could Reduce Batteries' Cost and Size

    Broader source: Energy.gov [DOE]

    Batteries for electric drive vehicles and renewable energy storage will reduce petroleum usage, improving energy security and reducing harmful emissions.

  10. Building Technologies Office: R&D Opportunities to Reduce Energy Consumption in Miscellaneous Electric Loads (MELs)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office: R&D Opportunities to Reduce Energy Consumption in Miscellaneous Electric Loads (MELs) Pat Phelan (patrick.phelan@ee.doe.gov) BTO Emerging Technologies June 3, 2016 2 Why Do We Care About MELs? Problem: Fraction of energy consumption due to MELs is rising as other building technologies become more efficient. DOE Quadrennial Technology Review (2015)  60% of remaining energy consumption after 2020 R&D targets are achieved, the majority of which are MELs. FY16 Activities: * Panel

  11. High Tonnage Forest Biomass Production Systems from Southern Pine Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Plantations | Department of Energy abstract

  12. Energy Assessment Training Reduces Energy Costs for the U.S. Coast Guard Sector Guam: Success Stories (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-05-01

    U.S. Coast Guard Sector Guam experiences considerable energy cost and use savings after implementing training from NREL's energy assessment training.

  13. NWTC Collaborative Increases Gearbox Reliability and Helps Reduce Cost of Wind Energy; NREL (National Renewable Energy Laboratory)

    SciTech Connect (OSTI)

    2015-07-01

    A collaborative at the National Renewable Energy Laboratory's (NREL's) National Wind Technology Center (NWTC) leads to wind turbine gearbox reliability and lowers the cost of wind energy.

  14. Large-scale Manufacturing of Nanoparticulate-based Lubrication Additives for Improved Energy Efficiency and Reduced Emissions

    SciTech Connect (OSTI)

    Erdemir, Ali

    2013-09-26

    This project was funded under the Department of Energy (DOE) Lab Call on Nanomanufacturing for Energy Efficiency and was directed toward the development of novel boron-based nanocolloidal lubrication additives for improving the friction and wear performance of machine components in a wide range of industrial and transportation applications. Argonne's research team concentrated on the scientific and technical aspects of the project, using a range of state-of-the art analytical and tribological test facilities. Argonne has extensive past experience and expertise in working with boron-based solid and liquid lubrication additives, and has intellectual property ownership of several. There were two industrial collaborators in this project: Ashland Oil (represented by its Valvoline subsidiary) and Primet Precision Materials, Inc. (a leading nanomaterials company). There was also a sub-contract with the University of Arkansas. The major objectives of the project were to develop novel boron-based nanocolloidal lubrication additives and to optimize and verify their performance under boundary-lubricated sliding conditions. The project also tackled problems related to colloidal dispersion, larger-scale manufacturing and blending of nano-additives with base carrier oils. Other important issues dealt with in the project were determination of the optimum size and concentration of the particles and compatibility with various base fluids and/or additives. Boron-based particulate additives considered in this project included boric acid (H{sub 3}BO{sub 3}), hexagonal boron nitride (h-BN), boron oxide, and borax. As part of this project, we also explored a hybrid MoS{sub 2} + boric acid formulation approach for more effective lubrication and reported the results. The major motivation behind this work was to reduce energy losses related to friction and wear in a wide spectrum of mechanical systems and thereby reduce our dependence on imported oil. Growing concern over greenhouse gas

  15. Energy Dependence of Fission Product Yields for 239Pu, 235U,...

    Office of Scientific and Technical Information (OSTI)

    Energy Dependence of Fission Product Yields for 239Pu, 235U, and 238U Citation Details In-Document Search Title: Energy Dependence of Fission Product Yields for 239Pu, 235U, and ...

  16. Energy Dept. Reports: U.S. Fuel Cell Market Production and Deployment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Dept. Reports: U.S. Fuel Cell Market Production and Deployment Continues Strong Growth Energy Dept. Reports: U.S. Fuel Cell Market Production and Deployment Continues Strong ...

  17. Buy Energy-Efficient Products: A Guide for Federal Purchasers and Specifiers

    Broader source: Energy.gov [DOE]

    Document encourages Federal purchasers and suppliers to procure energy-efficient products to save energy and money. It includes information about purchasing requirements, compliance contracts, and how to determine if a product is compliant with requirements.

  18. Reduce NOx and Improve Energy Efficiency, Software Tools for Industry, Industrial Technologies Program (ITP) (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2008-12-01

    This fact sheet describes how the Industrial Technologies Program NOx and Energy Assessment Tool (NxEAT) can help petroleum refining and chemical plants improve energy efficiency.

  19. High-Tech Garage Showcases Strategies for Reducing Energy (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-03-01

    The parking garage fact sheet highlights the many features of NREL's garage, including energy efficiency, renewable energy, water conservation, building materials, and waste minimization.

  20. Chemical Impact of Elevated CO2on Geothermal Energy Production | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Impact of Elevated CO2on Geothermal Energy Production Chemical Impact of Elevated CO2on Geothermal Energy Production This is a two phase project to assess the geochemical impact of CO2on geothermal energy production by: analyzing the geochemistry of existing geothermal fields with elevated natural CO2; measuring realistic rock-water rates for geothermal systems using laboratory and field-based experiments to simulate production scale impacts.