Powered by Deep Web Technologies
Note: This page contains sample records for the topic "recs features heating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Residential Energy Consumption Survey (RECS) - U.S. Energy Information  

Gasoline and Diesel Fuel Update (EIA)

About the RECS About the RECS RECS Survey Forms RECS Maps RECS Terminology Archived Reports State fact sheets Arizona household graph See state fact sheets › 2009 RECS Features Heating and cooling no longer majority of U.S. home energy use March 7, 2013 Newer U.S. homes are 30% larger but consume about as much energy as older homes February 12, 2013 Where does RECS square footage data come from? July 11, 2012 RECS data show decreased energy consumption per household June 6, 2012 The impact of increasing home size on energy demand April 19, 2012 Did you know that air conditioning is in nearly 100 million U.S. homes? August 19, 2011 See more > graph of U.S. electricity end use, as explained in the article text U.S. electricity sales have decreased in four of the past five years

2

Residential Energy Consumption Survey (RECS) - Analysis & Projections -  

U.S. Energy Information Administration (EIA) Indexed Site

About the RECS About the RECS RECS Survey Forms RECS Maps RECS Terminology Archived Reports State fact sheets Arizona household graph See state fact sheets › 2009 RECS Features Heating and cooling no longer majority of U.S. home energy use March 7, 2013 Newer U.S. homes are 30% larger but consume about as much energy as older homes February 12, 2013 Where does RECS square footage data come from? July 11, 2012 RECS data show decreased energy consumption per household June 6, 2012 The impact of increasing home size on energy demand April 19, 2012 Did you know that air conditioning is in nearly 100 million U.S. homes? August 19, 2011 See more > graph of U.S. electricity end use, as explained in the article text U.S. electricity sales have decreased in four of the past five years

3

Residential Energy Consumption Survey (RECS) - Analysis & Projections -  

Gasoline and Diesel Fuel Update (EIA)

About the RECS About the RECS RECS Survey Forms RECS Maps RECS Terminology Archived Reports State fact sheets Arizona household graph See state fact sheets › 2009 RECS Features Heating and cooling no longer majority of U.S. home energy use March 7, 2013 Newer U.S. homes are 30% larger but consume about as much energy as older homes February 12, 2013 Where does RECS square footage data come from? July 11, 2012 RECS data show decreased energy consumption per household June 6, 2012 The impact of increasing home size on energy demand April 19, 2012 Did you know that air conditioning is in nearly 100 million U.S. homes? August 19, 2011 See more > graph of U.S. electricity end use, as explained in the article text U.S. electricity sales have decreased in four of the past five years

4

RECS Archive  

U.S. Energy Information Administration (EIA) Indexed Site

Archived Publications & Reports Archived Publications & Reports Special Reports (click on table headings to sort) Title Release Year Cycle Year Format Residential Lighting Use and Potential Savings Release Date: September 1996 1996 1993 Preliminary Conservation Tables from National Interim Energy Consumption Survey Release Date: August 1, 1979 1979 1979 PDF RECS Conservation Release Date: February 1980 1980 1979 PDF An Economic Evaluation of Energy Conservation & Renewable Energy Tax Credits Release Date: 10/1985 1985 - PDF Residential Conservation Measures Release Date: July 1986 1986 1984 PDF Weatherization Program Evaluation Release Date: August 20,1984 1984 1981 PDF Measuring Energy Efficiency in the United States' Economy:A Beginning Release Date: October 1995 1995 1993 PDF

5

RECS student sequestration program  

SciTech Connect

The 2007 Research Experiment in Carbon Sequestration (RECS) met at the Montana State University (MSU) and a variety of field sites over the 10-day period of July 29 - Aug 10. This year's group consisted of 17 students from graduate and doctoral programs in the United States and Canada, as well as early career professionals in fields related to carbon mitigation. Appropriately, because greenhouse gas reduction and storage is a global problem, the group included seven international students, from France, Iran, Paraguay, Turkey, Russia and India. Classroom talks featured experts from academia, government, national laboratories, and the private sector, who discussed carbon capture and storage technologies and related policy issues. Then, students traveled to Colstrip, Montana to visit PPL Montana's coal-fired power plant and view the local geology along the Montana/Wyoming border. Finally, students spent several days in the hands-on work at ZERT, using carbon dioxide detection and monitoring equipment. 1 photo.

NONE

2007-12-31T23:59:59.000Z

6

Dubois REC - Residential Energy Efficiency Rebate Program | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Dubois REC - Residential Energy Efficiency Rebate Program Dubois REC - Residential Energy Efficiency Rebate Program Dubois REC - Residential Energy Efficiency Rebate Program < Back Eligibility Residential Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Heat Pumps Appliances & Electronics Water Heating Program Info State Indiana Program Type Utility Rebate Program Rebate Amount Water Heater: $50 - $400 Central Air Conditioner: $200 - $300 Air-source Heat Pump: $300 - $1,000 Dual Fuel Heat Pump: $300 - $400 Geothermal Heat Pump: $1,000 ETS Room Unit: $30/kW ETS Whole House Unit: $300 - $400 Provider Dubois REC Dubois REC offers a variety of rebates for residential customers to save energy in new or existing homes. Rebates are offered for geothermal and air-source heat pumps, central air conditioners, electric water heaters,

7

RECS Data Show Decreased Energy Consumption per Household  

Reports and Publications (EIA)

Total United States energy consumption in homes has remained relatively stable for many years as increased energy efficiency has offset the increase in the number and average size of housing units, according to the newly released data from the Residential Energy Consumption Survey (RECS). The average household consumed 90 million British thermal units (Btu) in 2009 based on RECS. This continues the downward trend in average residential energy consumption of the last 30 years. Despite increases in the number and the average size of homes plus increased use of electronics, improvements in efficiency for space heating, air conditioning, and major appliances have all led to decreased consumption per household. Newer homes also tend to feature better insulation and other characteristics, such as double-pane windows, that improve the building envelope.

2012-01-01T23:59:59.000Z

8

Residential Energy Consumption Survey (RECS) - Energy Information  

NLE Websites -- All DOE Office Websites (Extended Search)

Consumption Survey (RECS) - U.S. Energy Information Consumption Survey (RECS) - U.S. Energy Information Administration (EIA) U.S. Energy Information Administration - EIA - Independent Statistics and Analysis Sources & Uses Petroleum & Other Liquids Crude oil, gasoline, heating oil, diesel, propane, and other liquids including biofuels and natural gas liquids. Natural Gas Exploration and reserves, storage, imports and exports, production, prices, sales. Electricity Sales, revenue and prices, power plants, fuel use, stocks, generation, trade, demand & emissions. Consumption & Efficiency Energy use in homes, commercial buildings, manufacturing, and transportation. Coal Reserves, production, prices, employ- ment and productivity, distribution, stocks, imports and exports. Renewable & Alternative Fuels

9

Residential Energy Consumption Survey (RECS) - Analysis & Projections -  

Gasoline and Diesel Fuel Update (EIA)

Where does RECS square footage data come from? Where does RECS square footage data come from? RECS 2009 - Release date: July 11, 2012 The size of a home is a fixed characteristic strongly associated with the amount of energy consumed within it, particularly for space heating, air conditioning, lighting, and other appliances. As a part of the Residential Energy Consumption Survey (RECS), trained interviewers measure the square footage of each housing unit. RECS square footage data allow comparison of homes with varying characteristics. In-person measurements are vital because many alternate data sources, including property tax records, real estate listings, and, respondent estimates use varying definitions and under-estimate square footage as defined for the purposes of evaluating residential energy consumption.

10

DSW REC Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Renewable Energy Credits for DSW Hydro Power Projects Renewable Energy Credits for DSW Hydro Power Projects The DSW Regional Office is proposing a program to make Renewable Energy Credits (RECS) from the Boulder Canyon and/or Parker-Davis Projects available to our electric service customers who receive energy from these Projects. Select from the following options: Customer and Interested Parties Final letter Final program Resources Bureau of Reclamation Project Summaries Davis Power Plant Hoover Power Plant Parker Power Plant DSIRE - A database of Federal, State and local incentives for renewables and efficiency, including State Renewables Portfolio Standards WREGIS - An independent, renewable energy tracking system for the region covered by the Western Electricity Coordinating Council (WECC). WREGIS Fee Matrix & Definitions - A document containing WREGIS fees according to Account Holder, as well as Account Holder definitions.

11

RECs Workshop Panelist Discussion Questions  

NLE Websites -- All DOE Office Websites (Extended Search)

Challenges Challenges Panel #1: Discussion Panel on REC Markets, Prices, Trading, and Liquidity Moderator, Karlynn Cory, National Renewable Energy Laboratory Brent Beerley, IBERDROLA - Marketer Perspective Carrie Cullen-Hitt, Constellation NewEnergy - Retailer Perspective Carrie Plemons, PPM Energy - Generator Perspective John Pappas, PG&E - Purchaser Perspective Jim Scarrow, Chadbourne & Parke - Financier Perspective * Where do RECs have the greatest value today? What factors drive differences in value? Do you expect this to change over time? * How important are prospective REC revenue streams to project finance decisions? How certain are these revenue streams? What are the key market risks? How can REC revenues play a greater role in project finance? What governmental actions, at the state or federal

12

Residential Energy Consumption Survey (RECS) - Analysis & Projections -  

Gasoline and Diesel Fuel Update (EIA)

How does EIA estimate energy consumption and end uses in U.S. homes? How does EIA estimate energy consumption and end uses in U.S. homes? RECS 2009 - Release date: March 28, 2011 EIA administers the Residential Energy Consumption Survey (RECS) to a nationally representative sample of housing units. Specially trained interviewers collect energy characteristics on the housing unit, usage patterns, and household demographics. This information is combined with data from energy suppliers to these homes to estimate energy costs and usage for heating, cooling, appliances and other end uses â€" information critical to meeting future energy demand and improving efficiency and building design. RECS uses a multi-stage area probability design to select sample methodology figure A multi-stage area probability design ensures the selection

13

Marginal Energy Prices- RECS97 Update  

Energy.gov (U.S. Department of Energy (DOE))

An updated estimation of residential marginal energy prices at the individual house level using the 1997 RECS survey data

14

Residential Energy Consumption Survey (RECS) - Data - U.S. Energy  

U.S. Energy Information Administration (EIA) Indexed Site

3 RECS Survey Data 2009 | 2005 | 2001 | 1997 | 1993 | Previous 3 RECS Survey Data 2009 | 2005 | 2001 | 1997 | 1993 | Previous Housing Characteristics Consumption & Expenditures Microdata Methodology Housing Characteristics Tables Topical Sections Entire Section All Detailed Tables PDF Tables: HC1 Household Characteristics, Million U.S. Households Presents data relating to location, type, ownership, age, size, construction, and householder demographic and income characteristics. PDF Tables: HC2 Space Heating, Million U.S. Households Presents data describing the types of heating fuel and equipment used for main and secondary heating purposes. PDF Tables: HC3 Air-Conditioning, Million U.S. Households Presents data describing selected household characteristics including location, number of rooms and area cooled and air-conditioning usage. PDF

15

Residential Energy Consumption Survey (RECS) - Data - U.S. Energy  

U.S. Energy Information Administration (EIA) Indexed Site

5 RECS Survey Data 2009 | 2005 | 2001 | 1997 | 1993 | Previous 5 RECS Survey Data 2009 | 2005 | 2001 | 1997 | 1993 | Previous Housing Characteristics Consumption & Expenditures Microdata Housing Characteristics Tables + EXPAND ALL Floorspace - Housing Characteristics PDF (all tables) Total Floorspace All, Heated, and Cooled Floorspace (HC1.1.1) PDF XLS Average Floorspace All Housing Units (HC1.1.2) PDF XLS Single Family and Mobile Homes (HC1.1.3) PDF XLS Apartments (HC1.1.4) PDF XLS Usage Indicators Heated Floorspace (HC1.3) PDF XLS Cooled Floorspace (HC1.4) PDF XLS Floorspace - Living Space PDF (all tables) Total Floorspace All, Heated, and Cooled Floorspace (HC1.2.1) PDF XLS Average Floorspace All Housing Units (HC1.2.2) PDF XLS Single Family and Mobile Homes (HC1.2.3) PDF XLS Apartments (HC1.2.4) PDF XLS

16

REC Tracking Systems Design Guide  

SciTech Connect

OAK-B135 The Design Guide is presented in three parts. Section II describes the need for REC tracking, the two principal tracking methods available, and, in simple terms, the operation of certificate-based systems. Section III presents the major issues in the design of certificate-based tracking systems and discusses the advantages and disadvantages of alternative solutions. Finally, Section IV offers design principles or recommendations for most of these issues.

Meredith Wingate

2004-02-03T23:59:59.000Z

17

Energy efficient HVAC system features thermal storage and heat recovery  

SciTech Connect

This article describes a HVAC system designed to efficiently condition a medical center. The topics of the article include energy efficient design of the HVAC system, incentive rebate program by the local utility, indoor air quality, innovative design features, operations and maintenance, payback and life cycle cost analysis results, and energy consumption.

Bard, E.M. (Bard, Rao + Athanas Consulting Engineering Inc., Boston, MA (United States))

1994-03-01T23:59:59.000Z

18

Green Power Network: Renewable Energy Certificates (RECs)  

NLE Websites -- All DOE Office Websites (Extended Search)

Table of Retail Products Table of Retail Products Table of Commercial Certificate Marketers List of REC Marketers REC Prices National Renewable Energy Certificate Tracking Systems Map Carbon Offsets State Policies Renewable Energy Certificates (RECs) Renewable energy certificates (RECs), also known as renewable energy credits, green certificates, green tags, or tradable renewable certificates, represent the environmental attributes of the power produced from renewable energy projects and are sold separate from commodity electricity. Customers can buy green certificates whether or not they have access to green power through their local utility or a competitive electricity marketer. And they can purchase green certificates without having to switch electricity suppliers. Table of Retail Products

19

Renewable Energy Certificate (REC) Tracking Systems: Costs & Verification Issues (Presentation)  

SciTech Connect

This document provides information on REC tracking systems: how they are used in the voluntary REC market, a comparison of REC systems fees and information regarding how they treat environmental attributes.

Heeter, J.

2013-10-01T23:59:59.000Z

20

Marginal Energy Prices - RECS97 Update  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Marginal Energy Prices - RECS97 Update Marginal Energy Prices - RECS97 Update The original estimation of residential marginal energy prices at the individual household level (as reported in the Marginal Energy Prices Report, http://www.eren.doe.gov/buildings/codes_standards/applbrf/pdfs/marginal_ energy_price.pdf) was based on household energy billing data from EIA's 1993 RECS survey. When the 1997 RECS survey data became available, LBNL updated its estimation of residential marginal energy prices at the individual household level using that data. In addition, LBNL incorporated several refinements (as described below) to the marginal price estimation method it had originally developed. Presented below are the: * RECS97-based results. * Refinements to LBNL's marginal price estimation method.

Note: This page contains sample records for the topic "recs features heating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Marginal Energy Prices - RECS97 Update  

NLE Websites -- All DOE Office Websites (Extended Search)

Marginal Energy Prices - RECS97 Update Marginal Energy Prices - RECS97 Update The original estimation of residential marginal energy prices at the individual household level (as reported in the Marginal Energy Prices Report, http://www.eren.doe.gov/buildings/codes_standards/applbrf/pdfs/marginal_ energy_price.pdf) was based on household energy billing data from EIA's 1993 RECS survey. When the 1997 RECS survey data became available, LBNL updated its estimation of residential marginal energy prices at the individual household level using that data. In addition, LBNL incorporated several refinements (as described below) to the marginal price estimation method it had originally developed. Presented below are the: * RECS97-based results. * Refinements to LBNL's marginal price estimation method.

22

Inhibition of RecA Protein by the Escherichia coli RecX Protein MODULATION BY THE RecA C TERMINUS AND FILAMENT FUNCTIONAL STATE*  

E-Print Network (OSTI)

, often but not always found as it is in E. coli, just downstream of the recA gene (21­26). A palindromic sequence separates the two E. coli genes (27). The resulting hairpin interrupts transcriptional read on the RecX protein. We conclude that RecX protein interacts most effectively with a RecA func- tional state

Cox, Michael M.

23

Residential Energy Consumption Survey (RECS) - Analysis & Projections -  

Gasoline and Diesel Fuel Update (EIA)

The impact of increasing home size on energy demand The impact of increasing home size on energy demand RECS 2009 - Release date: April 19, 2012 Homes built since 1990 are on average 27% larger than homes built in earlier decades, a significant trend because most energy end-uses are correlated with the size of the home. As square footage increases, the burden on heating and cooling equipment rises, lighting requirements increase, and the likelihood that the household uses more than one refrigerator increases. Square footage typically stays fixed over the life of a home and it is a characteristic that is expensive, even impractical to alter to reduce energy consumption. According to results from EIA's 2009 Residential Energy Consumption Survey (RECS), the stock of homes built in the 1970s and 1980s averages less than

24

Residential Energy Consumption Survey (RECS) - Data - U.S. Energy  

U.S. Energy Information Administration (EIA) Indexed Site

1997 RECS Survey Data 2009 | 2005 | 2001 | 1997 | 1993 | Previous 1997 RECS Survey Data 2009 | 2005 | 2001 | 1997 | 1993 | Previous Housing Characteristics Consumption & Expenditures Microdata Methodology Housing Characteristics Tables Table Titles (Released: February 2004) Entire Section Percents Tables: HC1 Housing Unit Characteristics, Million U.S. Households PDF PDF NOTE: As of 10/31/01, numbers in the "Housing Units" TABLES section for stub item: "Number of Floors in Apartment Buildings" were REVISED. These numbers will differ from the numbers in the published report. Tables: HC2 Household Characteristics, Million U.S. Households PDF PDF Tables: HC3 Space Heating, Million U.S. Households PDF PDF Tables: HC4 Air-Conditioning, Million U.S. Households PDF PDF Tables: HC5 Appliances, Million U.S. Households PDF PDF

25

Steamboat Springs Health and Rec. Pool & Spa Low Temperature...  

Open Energy Info (EERE)

Springs Health and Rec. Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Steamboat Springs Health and Rec. Pool & Spa Low Temperature Geothermal...

26

Features  

NLE Websites -- All DOE Office Websites (Extended Search)

Features science-innovationassetsimagesicon-science.jpg Science & Innovation Features Our strong interdisciplinary teaming and unique research facilities allow us to develop...

27

Quick Guide: Renewable Energy Certificates (RECs) (Fact Sheet)  

SciTech Connect

Guide for Federal agencies considering renewable energy certificate (REC) purchases to fulfill Federal renewable energy requirements.

Not Available

2011-07-01T23:59:59.000Z

28

RECs: Tapping Into The Commercial Customer  

NLE Websites -- All DOE Office Websites (Extended Search)

June 2004 issue June 2004 issue Copyright © 2004 Zackin Publications Inc. All Rights Reserved. RECs: Tapping Into The Commercial Customer Making the business case for renewable energy certificates bought by large corporations. BY CRAIG HANSON AND VINCE VAN SON I n last month's issue, we introduced the renewable energy certificate (REC), a relatively new product that represents the environmental and other non-electrical attributes associated with 1 MWh of electricity generated from renewable resources. We also reported that several major U.S. corporations, including Alcoa, Cargill Dow LLC, Delphi Corp., DuPont, Interface, Johnson & Johnson, Kinko's, Pitney Bowes and Sta- ples, completed the nation's largest aggre- gate corporate purchase of RECs in Sep- tember 2003. Together, these members of

29

Status Report on REC Verification, Tracking and Associated Issues  

NLE Websites -- All DOE Office Websites (Extended Search)

REC REC Verification, Tracking Systems and Associated Issues DOE Workshop on REC Markets and Challenges September 11, 2007 Meredith Wingate Director of Clean Energy Policy Design and Implementation Center for Resource Solutions Main Points * Think National - Verification issues are getting more complicated with the intersection of RECs and emissions markets - Market needs more rigorous verification * More coordination is needed Role of Tracking Systems * Primary tool for implementing state RPS programs * Produce data for environmental disclosure programs * Facilitate REC transactions Certificate-based Tracking Programs * ERCOT RECs Program (2001) * NEPOOL GIS (2002) * WI RRC Program (2003-2007) * PJM GATS (2005) * NJ SRECS (2005) * WREGIS (2007) * M-RETS (2007) * New York State (2008?)

30

Renewable Energy Concepts Solar Inc REC Solar | Open Energy Information  

Open Energy Info (EERE)

Concepts Solar Inc REC Solar Concepts Solar Inc REC Solar Jump to: navigation, search Name Renewable Energy Concepts Solar Inc (REC Solar) Place San Luis Obispo, California Zip 93401 Sector Solar Product US-based solar system installer, specialising in grid-tied installation and servicing mainly California, Colorado, and New Jersey. Not in any way affiliated with Norwegian integrated PV manufacturer REC, which has a division called REC Solar. References Renewable Energy Concepts Solar Inc (REC Solar)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Renewable Energy Concepts Solar Inc (REC Solar) is a company located in San Luis Obispo, California . References ↑ "Renewable Energy Concepts Solar Inc (REC Solar)"

31

Residential Energy Consumption Survey (RECS) - U.S. Energy Information  

Gasoline and Diesel Fuel Update (EIA)

About the RECS About the RECS RECS Survey Forms RECS Maps RECS Terminology Archived Reports State fact sheets Arizona household graph See state fact sheets › graph of U.S. electricity end use, as explained in the article text U.S. electricity sales have decreased in four of the past five years December 20, 2013 Gas furnace efficiency has large implications for residential natural gas use December 5, 2013 EIA publishes state fact sheets on residential energy consumption and characteristics August 19, 2013 All 48 related articles › Other End Use Surveys Commercial Buildings - CBECS Manufacturing - MECS Transportation About the RECS EIA administers the Residential Energy Consumption Survey (RECS) to a nationally representative sample of housing units. Specially trained interviewers collect energy characteristics on the housing unit, usage

32

AEP Ohio - Renewable Energy Credit (REC) Purchase Program | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

AEP Ohio - Renewable Energy Credit (REC) Purchase Program AEP Ohio - Renewable Energy Credit (REC) Purchase Program AEP Ohio - Renewable Energy Credit (REC) Purchase Program < Back Eligibility Agricultural Commercial Fed. Government Industrial Institutional Local Government Nonprofit Residential Schools State Government Savings Category Solar Buying & Making Electricity Wind Program Info Start Date 07/2011 State Ohio Program Type Performance-Based Incentive Rebate Amount 2011 Solar: $300/REC 2012-2013 Solar: $262.50/REC 2011-2013 Wind: $34/REC Provider AEP Ohio '''''Note: This program is currently closed. All RECs were required to be transfered into AEP Ohio's GATS account by July 15, 2013 in order to be eligible for the program. No information is available regarding future solicitations. Check the program web site for more information. '''''

33

REC Solar (Colorado) | Open Energy Information  

Open Energy Info (EERE)

Colorado) Colorado) Jump to: navigation, search Logo: REC Solar Name REC Solar Address 9032 Marshall Court Place Westminster, Colorado Zip 80030 Sector Solar Product Solar panel installer Website http://recsolar.com/ Coordinates 39.860526°, -105.066446° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":39.860526,"lon":-105.066446,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

34

Residential Energy Consumption Survey (RECS) - Analysis & Projections -  

Gasoline and Diesel Fuel Update (EIA)

Share of energy used by appliances and consumer electronics increases in Share of energy used by appliances and consumer electronics increases in U.S. homes RECS 2009 - Release date: March 28, 2011 Over the past three decades, the share of residential electricity used by appliances and electronics in U.S. homes has nearly doubled from 17 percent to 31 percent, growing from 1.77 quadrillion Btu (quads) to 3.25 quads. This rise has occurred while Federal energy efficiency standards were enacted on every major appliance, overall household energy consumption actually decreased from 10.58 quads to 10.55 quads, and energy use per household fell 31 percent. Federal energy efficiency standards have greatly reduced consumption for home heating Total energy use in all U.S. homes occupied as primary residences decreased slightly from 10.58 quads in 1978 to 10.55 quads in 2005 as reported by the

35

The role of meiotic cohesin REC8 in chromosome segregation in {gamma} irradiation-induced endopolyploid tumour cells  

SciTech Connect

Escape from mitotic catastrophe and generation of endopolyploid tumour cells (ETCs) represents a potential survival strategy of tumour cells in response to genotoxic treatments. ETCs that resume the mitotic cell cycle have reduced ploidy and are often resistant to these treatments. In search for a mechanism for genome reduction, we previously observed that ETCs express meiotic proteins among which REC8 (a meiotic cohesin component) is of particular interest, since it favours reductional cell division in meiosis. In the present investigation, we induced endopolyploidy in p53-dysfunctional human tumour cell lines (Namalwa, WI-L2-NS, HeLa) by gamma irradiation, and analysed the sub-cellular localisation of REC8 in the resulting ETCs. We observed by RT-PCR and Western blot that REC8 is constitutively expressed in these tumour cells, along with SGOL1 and SGOL2, and that REC8 becomes modified after irradiation. REC8 localised to paired sister centromeres in ETCs, the former co-segregating to opposite poles. Furthermore, REC8 localised to the centrosome of interphase ETCs and to the astral poles in anaphase cells where it colocalised with the microtubule-associated protein NuMA. Altogether, our observations indicate that radiation-induced ETCs express features of meiotic cell divisions and that these may facilitate chromosome segregation and genome reduction.

Erenpreisa, Jekaterina [Latvian Biomedicine Research and Study Centre, Riga, LV-1067 (Latvia)] [Latvian Biomedicine Research and Study Centre, Riga, LV-1067 (Latvia); Cragg, Mark S. [Tenovus Laboratory, Cancer Sciences Division, Southampton University School of Medicine, General Hospital, Southampton SO16 6YD (United Kingdom)] [Tenovus Laboratory, Cancer Sciences Division, Southampton University School of Medicine, General Hospital, Southampton SO16 6YD (United Kingdom); Salmina, Kristine [Latvian Biomedicine Research and Study Centre, Riga, LV-1067 (Latvia)] [Latvian Biomedicine Research and Study Centre, Riga, LV-1067 (Latvia); Hausmann, Michael [Kirchhoff Inst. fuer Physik, Univ. of Heidelberg, D-69120 Heidelberg (Germany)] [Kirchhoff Inst. fuer Physik, Univ. of Heidelberg, D-69120 Heidelberg (Germany); Scherthan, Harry, E-mail: scherth@web.de [Inst. fuer Radiobiologie der Bundeswehr in Verbindung mit der Univ. Ulm, D-80937 Munich (Germany) [Inst. fuer Radiobiologie der Bundeswehr in Verbindung mit der Univ. Ulm, D-80937 Munich (Germany); MPI for Molec. Genetics, 14195 Berlin (Germany)

2009-09-10T23:59:59.000Z

36

Regional REC and RPS Best Practices  

SciTech Connect

The Great Lakes Renewable Energy Association conducted a program to explore the development of Renewable Energy Portfolio Standards and Renewable Energy Certificate Markets in the Midwest. The initiative represented the collaboration between the four state energy offices of Illinois, Indiana, Michigan and Ohio, the Great Lakes Renewable Energy Association (GLREA) and the Clean Energy State Alliance (CESA). The multi-state project explored the opportunities in the Midwest to expand the renewable energy market through Renewable Energy Portfolio Standards (RPS) and the trading of Renewable Energy Credits (RECs).

Jennifer Alvarado

2009-09-30T23:59:59.000Z

37

REC Solar (Oregon) | Open Energy Information  

Open Energy Info (EERE)

Oregon) Oregon) Jump to: navigation, search Name REC Solar Address 833 SE Main Street Place Portland, Oregon Zip 97214 Sector Solar Product Solar panel installer Website http://recsolar.com/ Coordinates 45.5136593°, -122.657084° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.5136593,"lon":-122.657084,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

38

The RECS relies on the respondents to provide the energy related details of their homes  

Gasoline and Diesel Fuel Update (EIA)

Householder's Perceptions of Insulation Adequacy and Householder's Perceptions of Insulation Adequacy and Drafts in the Home in 2001 Behjat Hojjati , PhD Energy Information Administration U.S. Department of Energy 1000 Independence Ave., SW, EI-63 Washington, DC 20585 behjat.hojjati@eia.doe.gov September 2004 Abstract In order to improve the estimation of end-use heating consumption, the Energy Information Administration's (EIA), 2001 Residential Energy Consumption Survey (RECS), for the first time, asked respondents to judge how drafty they perceived their homes to be as a measure of insulation quality. The analysis of the 2001 RECS data shows that householders in newly- constructed homes perceived their homes to be better insulated and less drafty than do householders in older homes. Single-family homes are perceived to be better insulated and less

39

Microsoft Word - LAP REC Principles - FINAL 2010-08-02.docx  

NLE Websites -- All DOE Office Websites (Extended Search)

customers will be allowed to request RECs from generation units under 30 MW, and from Colorado and Wyoming based generation. Western will define further subsets of RECs as...

40

Workshop on REC Markets and Challenges 2007, Summary  

NLE Websites -- All DOE Office Websites (Extended Search)

Keystone Center and NREL 1 Keystone Center and NREL 1 DOE-EERE Workshop on Renewable Energy Certificate (REC) Markets and Challenges - September 11, 2007 Workshop Summary Background The U.S. Department of Energy's (DOE) Office of Energy Efficiency and Renewable Energy (EERE) sponsored a one-day workshop for a diverse group of renewable energy certificate (REC) market participants and policy thought leaders on September 11, 2007. In doing so, DOE hopes to foster broad and liquid REC markets and to maximize investment in renewables. Approximately 65 individuals (see participant list in Appendix A) representing state and federal government agencies, renewable energy project developers, REC tracking systems, brokers, marketers, financiers, and other stakeholders gathered in Washington, D.C. At the workshop,

Note: This page contains sample records for the topic "recs features heating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

ATP Hydrolysis and DNA Binding by the Escherichia coli RecF Protein*  

E-Print Network (OSTI)

ATP Hydrolysis and DNA Binding by the Escherichia coli RecF Protein* (Received for publication ATP hydrolytic activity. ATP hydrolysis leads to RecF dissociation from double-stranded (ds to DNA. A mutant RecF protein that can bind but cannot hydrolyze ATP (RecF K36R) does not readily

Cox, Michael M.

42

Residential Energy Consumption Survey (RECS) - Energy Information...  

U.S. Energy Information Administration (EIA) Indexed Site

Heating and cooling no longer majority of U.S. home energy use Pie chart of energy consumption in homes by end uses Source: U.S. Energy Information Administration, Residential...

43

Residential Energy Consumption Survey (RECS) - Analysis & Projections -  

Gasoline and Diesel Fuel Update (EIA)

EIA household energy use data now includes detail on 16 States EIA household energy use data now includes detail on 16 States RECS 2009 - Release date: March 28, 2011 EIA is releasing new benchmark estimates for home energy use for the year 2009 that include detailed data for 16 States, 12 more than in past EIA residential energy surveys. EIA has conducted the Residential Energy Consumption Survey (RECS) since 1978 to provide data on home energy characteristics, end uses of energy, and expenses for the four Census Regions and nine Divisions. In 1997, EIA produced additional tabulations for the four most populous States (California, New York, Texas, and Florida). A threefold increase in the number of households included in the 2009 RECS offers more accuracy and coverage for understanding energy usage for all estimated States, Regions and Divisions.

44

Residential Energy Consumption Survey (RECS) - U.S. Energy Information  

Gasoline and Diesel Fuel Update (EIA)

RECS Terminology RECS Terminology A B C D E F G H I J K L M N O P Q R S T U V W XYZ A Account Classification: The method in which suppliers of electricity, natural gas, or fuel oil classify and bill their customers. Commonly used account classifications are "Commercial," "Industrial," "Residential," and "Other" Suppliers' definitions of these terms vary from supplier to supplier and from the definitions used in the Residential Energy Consumption Survey (RECS). In addition, the same customer may be classified differently by each of its energy suppliers. Adequacy of Insulation: The respondent's perception of the adequacy of the housing unit's insulation. Aggregate Ratio: The ratio of two population aggregates (totals). For

45

Residential Energy Consumption Survey (RECS) - Analysis & Projections -  

Gasoline and Diesel Fuel Update (EIA)

What's new in our home energy use? What's new in our home energy use? RECS 2009 - Release date: March 28, 2011 First results from EIA's 2009 Residential Energy Consumption Survey (RECS) The 2009 RECS collected home energy characteristics data from over 12,000 U.S. households. This report highlights findings from the survey, with details presented in the Household Energy Characteristics tables. How we use energy in our homes has changed substantially over the past three decades. Over this period U.S. homes on average have become larger, have fewer occupants, and are more energy-efficient. In 2005, energy use per household was 95 million British thermal units (Btu) of energy compared with 138 million Btu per household in 1978, a drop of 31 percent. Did You Know? Over 50 million U.S. homes have three or more televisions.

46

Plumas-Sierra REC - PV Rebate Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PV Rebate Program PV Rebate Program Plumas-Sierra REC - PV Rebate Program < Back Eligibility Agricultural Commercial Industrial Nonprofit Residential Savings Category Solar Buying & Making Electricity Maximum Rebate $6,000 for residential; $12,000 for small commercial, agricultural and non-profit applications; $20,000 for large commercial and industrial applications Program Info State California Program Type Utility Rebate Program Rebate Amount 2012 rebate level: $2.09/watt (AC) Incentives will be adjusted based on expected performance. Provider Plumas-Sierra REC Plumas-Sierra REC offers an incentive for its customers to install photovoltaic (PV) systems on homes and businesses. Rebates are available for qualifying systems between one kilowatt (kW) and 25 kW; the rebate amount is based on the installed capacity. The rebate level will decreases

47

RecA-mediated SOS induction requires an extended filament conformation but no ATP hydrolysis  

E-Print Network (OSTI)

RecA-mediated SOS induction requires an extended filament conformation but no ATP hydrolysis filament on single-stranded DNA and hydrolyzes ATP. The RecA K72R (recA2201) muta- tion eliminates in the presence of ATP. Strains with this mutation do not undergo SOS induction in vivo. We have combined the K72R

Cox, Michael M.

48

Preserving the feature record: a systematic analysis of cooking and heating features from the Richard Beene site (41BX831), Texas  

E-Print Network (OSTI)

remains, burned matrix, or ash. It must, however, exhibit morpho- logical characteristics such as basin-shape, concavity in profile, or evidence for in-filling. These discriminating morphological attributes for pit structure are critical in any feature... remains, burned matrix, or ash. It must, however, exhibit morpho- logical characteristics such as basin-shape, concavity in profile, or evidence for in-filling. These discriminating morphological attributes for pit structure are critical in any feature...

Clabaugh, Patricia Ann

2012-06-07T23:59:59.000Z

49

Residential Energy Consumption Survey (RECS) - Data - U.S. Energy  

U.S. Energy Information Administration (EIA) Indexed Site

2001 RECS Survey Data 2009 | 2005 | 2001 | 1997 | 1993 | Previous 2001 RECS Survey Data 2009 | 2005 | 2001 | 1997 | 1993 | Previous Housing Characteristics Consumption & Expenditures Microdata Methodology Housing Characteristics Tables + EXPAND ALL Tables HC1: Housing Unit Characteristics, Million U.S. Households PDF (all tables) Climate Zone PDF Year of Construction PDF Household Income PDF Type of Owner-Occupied Housing Unit PDF Four Most Populated States PDF Urban/Rural Location PDF Northeast Census Region PDF Midwest Census Region PDF South Census Region PDF West Census Region PDF Tables HC2: Household Characteristics, Million U.S. Households PDF (all tables) Climate Zone PDF Year of Construction PDF Household Income PDF Type of Housing Unit PDF Type of Owner-Occupied Housing Unit PDF Type of Rented Housing Unit PDF

50

Residential Energy Consumption Survey (RECS) - Analysis & Projections -  

Gasoline and Diesel Fuel Update (EIA)

Air conditioning in nearly 100 million U.S. homes Air conditioning in nearly 100 million U.S. homes RECS 2009 - Release date: August 19, 2011 line chart:air conditioning in U.S. figure dataExcept in the temperate climate regions along the West coast, air conditioners (AC) are now standard equipment in most U.S. homes (Figure 1). As recently as 1993, only 68% of all occupied housing units had AC. The latest results from the 2009 Residential Energy Consumption Survey (RECS) show that 87 percent of U.S. households are now equipped with AC. This growth occurred among all housing types and in every Census region. Wider use has coincided with much improved energy efficiency standards for AC equipment, a population shift to hotter and more humid regions, and a housing boom during which average housing sizes increased.

51

Magnesium Ion-dependent Activation of the RecA Protein Involves the C Terminus*  

E-Print Network (OSTI)

Magnesium Ion-dependent Activation of the RecA Protein Involves the C Terminus* Received with ATP. We provide evi- dence that the free magnesium ion is required to medi- ate a conformational at low magnesium ion concentrations. The RecA protein of Escherichia coli plays a central role

Cox, Michael M.

52

Fluid flow and heat transfer across an elliptical hollow fiber membrane tube bank with randomly distributed features  

Science Journals Connector (OSTI)

Abstract An elliptical hollow fiber membrane tube bank (EHFMTB) has better performances while being employed for air humidification. The EHFMTB is populated in a plastic shell to form a shell-and-tube heat exchanger like membrane contactor. The tube bank is always randomly populated in practical applications because of convenience and randomness in the manufacturing process. The fluid flow and heat transfer across a randomly distributed elliptical hollow fiber membrane tube bank (REHFMTB) are investigated. To disclose the influences of the fiber arrangements on the performances, three unit cells containing 20 fibers with different randomly distributions are selected as the calculating domains. A renormalization group k? (RNG KE) turbulence model with enhanced wall treatment is used for solving the equations governing the momentum and heat transports. The friction factor and Nusselt number across the REHFMTB under various fiber distributions, Reynolds numbers (Re), packing fractions (?) and elliptical semiaxis ratios (b/a) are numerically obtained and experimentally validated. It is found that the comprehensive heat transfer performance is deteriorated for the fluid flow across the REHFMTB.

Runhua Jiang; Minlin Yang; Sheng Chen; Si-Min Huang; Xiaoxi Yang

2014-01-01T23:59:59.000Z

53

REC Silicon formerly ASiMI | Open Energy Information  

Open Energy Info (EERE)

Silicon formerly ASiMI Silicon formerly ASiMI Jump to: navigation, search Name REC Silicon (formerly ASiMI) Place Butte, Montana Zip 59750 Product Manufactures and sells polycrystalline silicon. Coordinates 47.838435°, -100.665669° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":47.838435,"lon":-100.665669,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

54

REC Group Renewable Energy Corporation | Open Energy Information  

Open Energy Info (EERE)

Group Renewable Energy Corporation Group Renewable Energy Corporation Jump to: navigation, search Name REC Group (Renewable Energy Corporation) Place Høvik, Norway Zip N-1323 Sector Solar Product Norwegian chemicals company; covers the whole solar value chain with its main focus the manufacturing of solar grade polysilicon feedstock and wafers. Coordinates 59.900429°, 10.57538° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":59.900429,"lon":10.57538,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

55

Quick Guide: Renewable Energy Certificates (RECs) (Fact Sheet), Federal Energy Management Program (FEMP)  

NLE Websites -- All DOE Office Websites (Extended Search)

energy for different facilities through energy for different facilities through multiple suppliers. Because this allows for aggregate REC purchases for multiple sites, check with your agency before proceeding to determine whether REC purchases are already being made at the agency level. Federal Renewable Energy Requirements Satisfied by RECs Multiple laws and executive orders define requirements for the use of renewable energy in Federal facilities. RECs can only be used to satisfy goals associated with renewable energy consumption or the environmental benefits of renewable energy consumption. This includes meeting GHG emissions reduction goals. Energy Policy Act (EPAct) of 2005: EPAct 2005 requires Federal agencies to consume increasing amounts of renewable energy; specifically: * 3 percent in fiscal

56

Quick Guide: Renewable Energy Certificates (RECs) (Fact Sheet), Federal Energy Management Program (FEMP)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

energy for different facilities through energy for different facilities through multiple suppliers. Because this allows for aggregate REC purchases for multiple sites, check with your agency before proceeding to determine whether REC purchases are already being made at the agency level. Federal Renewable Energy Requirements Satisfied by RECs Multiple laws and executive orders define requirements for the use of renewable energy in Federal facilities. RECs can only be used to satisfy goals associated with renewable energy consumption or the environmental benefits of renewable energy consumption. This includes meeting GHG emissions reduction goals. Energy Policy Act (EPAct) of 2005: EPAct 2005 requires Federal agencies to consume increasing amounts of renewable energy; specifically: * 3 percent in fiscal

57

Steamboat Springs Health and Rec. Pool & Spa Low Temperature Geothermal  

Open Energy Info (EERE)

Health and Rec. Pool & Spa Low Temperature Geothermal Health and Rec. Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Steamboat Springs Health and Rec. Pool & Spa Low Temperature Geothermal Facility Facility Steamboat Springs Health and Rec. Sector Geothermal energy Type Pool and Spa Location Steamboat Springs, Colorado Coordinates 40.4849769°, -106.8317158° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[]}

58

Water and Space Heating Heat Pumps  

E-Print Network (OSTI)

This paper discusses the design and operation of the Trane Weathertron III Heat Pump Water Heating System and includes a comparison of features and performance to other domestic water heating systems. Domestic water is generally provided through...

Kessler, A. F.

1985-01-01T23:59:59.000Z

59

Green Power Network: Featured Reports  

NLE Websites -- All DOE Office Websites (Extended Search)

Alphabetical Listing Alphabetical Listing Categorical Listing Chronological Listing Featured Reports Featured Reports Selected from from our Library of Green Power Publications Some of the following documents are available as Adobe Acrobat PDFs. Download Adobe Reader. Feature Report Heeter, J., T. Nicholas, 2013. Status and Trends in the U.S. Voluntary Green Power Market (2012 Data). NREL Report No. TP-6A20-60210. (PDF 1.2 MB) Heeter, J., 2013. Renewable Energy Certificate (REC) Tracking Systems: Costs & Verification Issues (Presentation). NREL/PR-6A20-60640. (PDF 517 KB) Heeter, J., P. Armstrong, L. Bird, 2012. Market Brief: Status of the Voluntary Renewable Energy Certificate Market (2011 Data). NREL/TP-6A20-52925 (PDF 974 KB) Bird, L., A. Reger, and J. Heeter, 2012. Distributed Solar Incentive

60

Renewable Energy Certificates and Air Emissions Benefits: Developing an Appropriate Definition for a REC  

NLE Websites -- All DOE Office Websites (Extended Search)

ENVIRONMENTAL RESOURCES TRUST ENVIRONMENTAL RESOURCES TRUST Pioneering Markets to Improve the Environment Renewable Energy Certificates and Air Emissions Benefits Developing an Appropriate Definition for a REC Patrick Leahy and Alden Hathaway April 2004 The Renewable Energy Certificate Market The past few years have witnessed the emergence of the Renewable Energy Certificate (REC) market as a viable model for the U.S. renewable energy industry. Once considered an esoteric topic for even the most ardent renewable energy expert, RECs have grown in popularity and exposure thanks to efforts of the renewable energy industry as well as several large purchases by high profile corporations and governmental organizations. Although still in its infancy, the Renewable Energy

Note: This page contains sample records for the topic "recs features heating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

File:REC Generator Certification Application - Texas.pdf | Open Energy  

Open Energy Info (EERE)

REC Generator Certification Application - Texas.pdf REC Generator Certification Application - Texas.pdf Jump to: navigation, search File File history File usage Metadata File:REC Generator Certification Application - Texas.pdf Size of this preview: 463 × 599 pixels. Other resolution: 464 × 600 pixels. Go to page 1 2 3 4 5 6 Go! next page → next page → Full resolution ‎(1,275 × 1,650 pixels, file size: 55 KB, MIME type: application/pdf, 6 pages) File history Click on a date/time to view the file as it appeared at that time. Date/Time Thumbnail Dimensions User Comment current 14:59, 26 June 2013 Thumbnail for version as of 14:59, 26 June 2013 1,275 × 1,650, 6 pages (55 KB) Apalazzo (Talk | contribs) You cannot overwrite this file. Edit this file using an external application (See the setup instructions for more information)

62

GRR/Section 7-TX-b - REC Generator | Open Energy Information  

Open Energy Info (EERE)

TX-b - REC Generator TX-b - REC Generator < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 7-TX-b - REC Generator 07TXBRECGeneratorCertification.pdf Click to View Fullscreen Contact Agencies Public Utility Commission of Texas Regulations & Policies Goal for Renewable Energy, PUCT Substantive Rule 25.173 Triggers None specified Click "Edit With Form" above to add content 07TXBRECGeneratorCertification.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative This flowchart illustrates the application and approval process for participating in the Renewable Energy Credit program in Texas.

63

STATEMENT OF CONSIDERATIONS REQUEST BY RELIANCE ELECTRIC COMPANY (REC) FOR AN  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

RELIANCE ELECTRIC COMPANY (REC) FOR AN RELIANCE ELECTRIC COMPANY (REC) FOR AN ADVANCE WAIVER OF DOMESTIC AND FOREIGN PATENT RIGHTS UNDER DOE CONTRACT DE-FC02-93CH10580: W(A)-93-028; CH-0786 Reliance Electric Company (REC) has requested a waiver of domestic and foreign patent rights for all subject inventions of its employees, including those of its wholly owned or controlled subsidiaries and affiliates, under a Cooperative Agreement for the development of a 100 horsepower synchronous motor utilizing superconducting coils under DOE Contract No. DE-FC02-93CH10580. This agreement was awarded under DOE's Superconductivity Partnership Initiative. Technical data first produced under this program will be afforded limited protection pursuant to Title XXX, Section 3001(d), of the Energy Policy Act of 1992.

64

Identification and characterization of the Escherichia coli RecT protein, a protein encoded by the recE region that promotes renaturation of homologous single-stranded DNA.  

Science Journals Connector (OSTI)

...recE region encodes such an activity. Expression of the recE region substitutes for the two differ- ent recombination genes, redac and redo, encoded by bacte- riophage X (11, 13, 14). Because exoVIII is biochemically similar to the X reda gene product...

S D Hall; M F Kane; R D Kolodner

1993-01-01T23:59:59.000Z

65

Campus Rec | 210 ASRC -1800 SW Sixth Avenue | Portland, OR 97201 www.pdx.edu/recreation  

E-Print Network (OSTI)

Campus Rec | 210 ASRC - 1800 SW Sixth Avenue | Portland, OR 97201 www.pdx.edu/recreation Outdoor recreation. This is accomplished by offering adventure trips, non-credit instruction, team-building programs resource to the PSU community regarding outdoor recreation. DESCRIPTION The Climbing Center Student

Veerman, J. J. P.

66

Campus Rec | 210 ASRC -1800 SW Sixth Avenue | Portland, OR 97201 www.pdx.edu/recreation  

E-Print Network (OSTI)

Campus Rec | 210 ASRC - 1800 SW Sixth Avenue | Portland, OR 97201 www.pdx.edu/recreation Outdoor and environmentally conscious outdoor recreation. This is accomplished by offering adventure trips, non as the informational resource to the PSU community regarding outdoor recreation. This position is open to all currently

Daescu, Dacian N.

67

Campus Rec | 210 ASRC -1800 SW Sixth Avenue | Portland, OR 97201 www.pdx.edu/recreation  

E-Print Network (OSTI)

Campus Rec | 210 ASRC - 1800 SW Sixth Avenue | Portland, OR 97201 www.pdx.edu/recreation Lifeguard Avenue | Portland, OR 97201 www.pdx.edu/recreation Type of work ­ position requires mostly sitting experience. Application can be found here: http://www.pdx.edu/recreation/employment-opportunities-0 o See

Bertini, Robert L.

68

StatREC: a graphical user interface tool for visual hypothesis testing of cost prediction models  

Science Journals Connector (OSTI)

Background: During the previous decades there has been noted a significantly increased research interest on the construction of prediction models for accurate estimation of software cost. Despite the development of sophisticated methodologies, ... Keywords: REC curves, graphical comparison, graphical user interface, permutation test, prediction models, software cost estimation

Nikolaos Mittas; Ioannis Mamalikidis; Lefteris Angelis

2012-09-01T23:59:59.000Z

69

Title: Structure and Function of Bacterial RecN Protein Principal Investigator: Shelley Lusetti  

E-Print Network (OSTI)

identified a RecN homolog from Deinococcus radiodurans that is soluble in E. coli and are well positioned in both E. coli and D. radiodurans genetic systems. This work will provide valuable models Lusetti Sponsor: U. S. Department of Health and Human Services National Institutes of Health (NIH) Summary

Johnson, Eric E.

70

Residential Energy Consumption Survey (RECS) - Analysis & Projections -  

Gasoline and Diesel Fuel Update (EIA)

All Reports & Publications All Reports & Publications Search By: Go Pick a date range: From: To: Go graph of U.S. electricity end use, as explained in the article text U.S. electricity sales have decreased in four of the past five years December 20, 2013 Gas furnace efficiency has large implications for residential natural gas use December 5, 2013 EIA publishes state fact sheets on residential energy consumption and characteristics August 19, 2013 All 48 related articles › ResidentialAvailable formats PDF Modeling Distributed Generation in the Buildings Sectors Released: August 29, 2013 This report focuses on how EIA models residential and commercial sector distributed generation, including combined heat and power, for the Annual Energy Outlook. State Fact Sheets on Household Energy Use

71

Physics II Exam 2 -Chs. 18A,19,20 -Electric Current, Magnetic Field Feb. 23, 2009 Name Rec. Instr. Rec. Time  

E-Print Network (OSTI)

Physics II Exam 2 - Chs. 18A,19,20 - Electric Current, Magnetic Field Feb. 23, 2009 Name Rec. Instr·m/A, elementary charge e = 1.602?10-19 C, electron mass me = 9.11?10-31 kg, 1 electron-volt = 1.0 eV = 1. (aluminum resistivity is = 2.65?10-8 ·m). a) (4) What resistance should a 1.00 meter length of the wire

Wysin, Gary

72

The Role of The fedeRal PRojecT diRecToR  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Role of The fedeRal PRojecT diRecToR: Role of The fedeRal PRojecT diRecToR: lessons fRom The naTional igniTion faciliTy The national ignition facility (nif) is home of the world's largest laser. With 192 laser beams that can deliver more than 60 times the energy of any previous laser system, NIF represents a significant step in enabling the study of high-energy density science, and should demonstrate fusion ignition and burn in the laboratory for the first time. The design and construction of this unique, highly complex facility posed management challenges that the project team overseeing its development could not foresee. The national ignition facility's final optics assemblies, shown here mounted on the lower hemisphere of the target chamber, contain

73

MHK Projects/Ocean Navitas NaREC | Open Energy Information  

Open Energy Info (EERE)

Navitas NaREC Navitas NaREC < MHK Projects Jump to: navigation, search << Return to the MHK database homepage Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":5,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"500px","height":"350px","centre":false,"title":"","label":"","icon":"File:Aquamarine-marker.png","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":55.1294,"lon":-1.50652,"alt":0,"address":"","icon":"http:\/\/prod-http-80-800498448.us-east-1.elb.amazonaws.com\/w\/images\/7\/74\/Aquamarine-marker.png","group":"","inlineLabel":"","visitedicon":""}]}

74

MHK Projects/University of Manchester Phase 1 and 2 NaREC | Open Energy  

Open Energy Info (EERE)

University of Manchester Phase 1 and 2 NaREC University of Manchester Phase 1 and 2 NaREC < MHK Projects Jump to: navigation, search << Return to the MHK database homepage Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":5,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"500px","height":"350px","centre":false,"title":"","label":"","icon":"File:Aquamarine-marker.png","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":55.1294,"lon":-1.50652,"alt":0,"address":"","icon":"http:\/\/prod-http-80-800498448.us-east-1.elb.amazonaws.com\/w\/images\/7\/74\/Aquamarine-marker.png","group":"","inlineLabel":"","visitedicon":""}]}

75

Residential Energy Expenditures for Water Heating (2005) | OpenEI  

Open Energy Info (EERE)

Expenditures for Water Heating (2005) Expenditures for Water Heating (2005) Dataset Summary Description Provides total and average household expenditures on energy for water heating in the United States in 2005. The data was collected as part of the Residential Energy Consumption Survey (RECS). RECS is a national survey that collects residential energy-related data. The survey collected data from 4,381 households in housing units statistically selected to represent the 111.1 million housing units in the United States. Data were obtained from residential energy suppliers for each unit in the sample to produce the data. Source EIA Date Released September 01st, 2008 (6 years ago) Date Updated January 01st, 2009 (6 years ago) Keywords Energy Expenditures Residential Water Heating Data application/vnd.ms-excel icon 2005_Total.Expenditures.for_.Water_.Heating_EIA.Sep_.2008.xls (xls, 70.1 KiB)

76

X-ray Crystal Structure of the Bacterial Conjugation Factor PsiB, a Negative Regulator of RecA  

SciTech Connect

During bacterial conjugation, genetic material from one cell is transferred to another as single-stranded DNA. The introduction of single-stranded DNA into the recipient cell would ordinarily trigger a potentially deleterious transcriptional response called SOS, which is initiated by RecA protein filaments formed on the DNA. During F plasmid conjugation, however, the SOS response is suppressed by PsiB, an F-plasmid-encoded protein that binds and sequesters free RecA to prevent filament formation. Among the many characterized RecA modulator proteins, PsiB is unique in using sequestration as an inhibitory mechanism. We describe the crystal structure of PsiB from the Escherichia coli F plasmid. The stucture of PsiB is surprisingly similar to CapZ, a eukaryotic actin filament capping protein. Structure-directed neutralization of electronegative surfaces on PsiB abrogates RecA inhibition whereas neutralization of an electropositive surface element enhances PsiB inhibition of RecA. Together, these studies provide a first molecular view of PsiB and highlight its use as a reagent in studies of RecA activity.

Petrova, Vessela; Satyshur, Kenneth A.; George, Nicholas P.; McCaslin, Darrell; Cox, Michael M.; Keck, James L. (UW)

2012-03-16T23:59:59.000Z

77

Creating Directed Double-strand Breaks with the Ref Protein: A Novel Rec A-Dependent Nuclease from Bacteriophage P1  

SciTech Connect

The bacteriophage P1-encoded Ref protein enhances RecA-dependent recombination in vivo by an unknown mechanism. We demonstrate that Ref is a new type of enzyme; that is, a RecA-dependent nuclease. Ref binds to ss- and dsDNA but does not cleave any DNA substrate until RecA protein and ATP are added to form RecA nucleoprotein filaments. Ref cleaves only where RecA protein is bound. RecA functions as a co-nuclease in the Ref/RecA system. Ref nuclease activity can be limited to the targeted strands of short RecA-containing D-loops. The result is a uniquely programmable endonuclease activity, producing targeted double-strand breaks at any chosen DNA sequence in an oligonucleotide-directed fashion. We present evidence indicating that cleavage occurs in the RecA filament groove. The structure of the Ref protein has been determined to 1.4 {angstrom} resolution. The core structure, consisting of residues 77-186, consists of a central 2-stranded {beta}-hairpin that is sandwiched between several {alpha}-helical and extended loop elements. The N-terminal 76 amino acid residues are disordered; this flexible region is required for optimal activity. The overall structure of Ref, including several putative active site histidine residues, defines a new subclass of HNH-family nucleases. We propose that enhancement of recombination by Ref reflects the introduction of directed, recombinogenic double-strand breaks.

Gruenig, Marielle C.; Lu, Duo; Won, Sang Joon; Dulberger, Charles L.; Manlick, Angela J.; Keck, James L.; Cox, Michael M. (UW)

2012-03-16T23:59:59.000Z

78

WAPA REC RFP - Deadline: August 9, 2013 - 4:30 p.m. PT | OpenEI Community  

Open Energy Info (EERE)

WAPA REC RFP - Deadline: August 9, 2013 - 4:30 p.m. PT WAPA REC RFP - Deadline: August 9, 2013 - 4:30 p.m. PT Home > Groups > Renewable Energy RFPs Graham7781's picture Submitted by Graham7781(1992) Super contributor 5 August, 2013 - 14:26 Western Area Power Administration desires to purchase Renewable Energy Certificates (RECs) on behalf of Federal Agencies (If a message box asking for user name and password appears, click cancel until the document opens). Proposals submitted in response to this RFP must be received via MAIL or FAX to Western on or before August 9, 2013, at 4:30 p.m. PDT to be considered for evaluation. E-mail proposals will not be considered. Western reserves the right to not consider any proposals received after the prescribed dates and time. See Frequently Asked Questions (If a message

79

Water Heating Standing Technical Committee Presentation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Standing Technical Committee Standing Technical Committee Water Heating Residential Energy Efficiency Stakeholder's Meeting February 29, 2012 - Austin, Texas 2 STC Chairman Responsibilities * To maintain the Water Heating Strategic Plan (living document) * To work with stakeholders to identify research activities that resolve gaps & barriers towards achieving Water Heating Strategic Goals * To work with stakeholders to prioritize gaps leading to future BA research efforts * To serve as a collection point for BA research activities and outside research * To facilitate collaboration among BA researchers and the marketplace 3 Water Heating as a Significant End Use According to DOE RECS data, residential water heating represents 20% of the energy delivered to U.S. households. 4 Water Heating Strategic Goals

80

Evidence for the Coupling of ATP Hydrolysis to the Final (Extension) Phase of RecA Protein-mediated DNA Strand Exchange*  

E-Print Network (OSTI)

Evidence for the Coupling of ATP Hydrolysis to the Final (Extension) Phase of RecA Protein-Madison, Madison, Wisconsin 53706 RecA protein promotes a limited DNA strand ex- change reaction, without ATP. This nascent hybrid DNA is extended in a reaction that can be coupled to ATP hydrolysis. When ATP is hydrolyzed

Cox, Michael M.

Note: This page contains sample records for the topic "recs features heating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Isolation of human and mouse genes based on homology to REC2, a recombinational repair gene from the fungus?Ustilago?maydis  

Science Journals Connector (OSTI)

...refine the localization of the Rec2 gene. The scoring data was submitted to the Stanford Radiation Hybrid server ( rhserver@shgc.stanford.edu ). Radiation Hybrid server analysis showed linkage of hREC2 to the D14S258 marker with a logarithm of odds...

Michael C. Rice; Sheryl T. Smith; Florencia Bullrich; Pamela Havre; Eric B. Kmiec

1997-01-01T23:59:59.000Z

82

Influence of Cu doping and post-heat treatment on the microstructure, optical properties and photoluminescence features of solgel derived nanostructured CdS thin films  

Science Journals Connector (OSTI)

Abstract Cu doped CdS nanocrystalline thin films were prepared by the solgel dip-coating method incorporated in polyethyleneglycol matrix. After heat treatment in air at 250 and 350C, the prepared thin films were investigated by studying their structural, morphological, compositional, optical (linear and nonlinear) and photoluminescence properties. X-ray diffraction (XRD) results suggest that the samples are polycrystalline in nature with hexagonal crystal structure and the average grain size is in the range of 1519nm. The surface morphology of the films was examined by scanning electron microscopy (SEM). The results showed that the films consist of nanocrystalline grains included in the clusters with uniform coverage of the substrate surface. To examine the chemical composition of the films, the X-ray photoelectron spectra (XPS) of the composite films were measured. It was found that the transmittance and the band gap decreased totally as the Cu concentration/annealing temperature increased. The refractive index of the films was studied and the related dispersion was discussed in terms of the WempleDidomenico single oscillator model. The third-order nonlinear polarizability of the films was estimated through a semi-empirical relation based on single oscillator model and the results showed that the prepared films are proper to use as optical switch. For photoluminescence (PL) study, 200 and 365nm excitation wavelengths were examined and compared together. The intensities of emission peaks for the prepared thin films varied with Cu doping/annealing temperature and the behaviors of different band peaks were discussed with giving reasons.

A. Abdolahzadeh Ziabari; F.E. Ghodsi

2013-01-01T23:59:59.000Z

83

RECS Fuel Oil Usage Form_v1 (Draft).xps  

U.S. Energy Information Administration (EIA) Indexed Site

fuel oil usage for this delivery address between fuel oil usage for this delivery address between September 2008 and April 2010. Delivery Number Enter the Delivery Date for each delivery 1 2 3 4 5 6 7 8 9 10 Enter the Total Dollar Amount including taxes [Exclude late fees, merchandise, repairs, and service charges] 11 12 13 14 15 16 17 18 19 20 Form EIA 457G OMB No. 1905-0092 Expires 1/31/13 2009 RECS Fuel Oil and Kerosene Usage Form Delivery Address: Account Number: $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Enter the Amount Delivered in Gallons XXXX Type of Fuel Sold was: 1=Fuel Oil #1 2=Fuel Oil #2 3=Kerosene 4=Other Enter the Price per Gallon $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ XXX.XX $ X.XX (select one) 1 2 3 4 MM/DD/YY Page 1 of 2 U.S. Energy Information Administration Independent Statistics & Analysis

84

Inhibition of RNA polymerase II transcription by oligonucleotide-RecA protein filaments targeted to promoter sequences  

Science Journals Connector (OSTI)

...discriminatory tool in mapping such sites. We thank Ning Ye for the purification of RecA protein and Dr. K. Krady and Dr. Z. Pitluck for the generous gift of plasmids pYT104-1 and pBM415. This research was supported by grants from the National Institutes...

E I Golub; C M Radding; D C Ward

1993-01-01T23:59:59.000Z

85

Heat Pumps | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Heat Pumps Heat Pumps Heat Pumps Geothermal heat pumps are expensive to install but pay for themselves over time in reduced heating and cooling costs. Learn more about how geothermal heat pumps heat and cool buildings by concentrating the naturally existing heat contained within the earth -- a clean, reliable, and renewable source of energy. In moderate climates, heat pumps can be an energy-efficient alternative to furnaces and air conditioners. Several types of heat pumps are available, including air-source; geothermal; ductless, mini-split; and absorption heat pumps. Learn more about the different options and how to use your heat pump efficiently to save money and energy at home. Featured Heat Pump Systems A heat pump can provide an alternative to using your air conditioner. | Photo courtesy of iStockPhoto/LordRunar.

86

NaREC Offshore and Drivetrain Test Facility Collaboration: Cooperative Research and Development Final Report, CRADA Number CRD-04-140  

SciTech Connect

The National Renewable Energy Laboratory (NREL) and the National Renewable Energy Centre (NaREC) in the United Kingdom (UK) have a mutual interest in collaborating in the development of full-scale offshore wind energy and drivetrain testing facilities. NREL and NaREC will work together to share resources and experiences in the development of future wind energy test facilities. This Cooperative Research and Development Agreement (CRADA) includes sharing of test protocols, infrastructure cost data, test plans, pro forma contracting instruments, and safe operating strategies. Furthermore, NREL and NaREC will exchange staff for training and development purposes.

Musial, W.

2014-08-01T23:59:59.000Z

87

PETSc: Features  

NLE Websites -- All DOE Office Websites (Extended Search)

Features Features Home Download Features Component Details Diagram GPUs Theads Documentation Applications/Publications Miscellaneous External Software Developers Site PETSc is intended for use in large-scale application projects, many ongoing computational science projects are built around the PETSc libraries. PETSc is easy to use for beginners. Moreover, its careful design allows advanced users to have detailed control over the solution process. PETSc includes a large suite of parallel linear, nonlinear equation solvers and ODE integrators that are easily used in application codes written in C, C++, Fortran and now Python. PETSc provides many of the mechanisms needed within parallel application codes, such as simple parallel matrix and vector assembly routines that allow the overlap of communication and computation.

88

Today's Features The heat is on  

E-Print Network (OSTI)

potential is being estimated. A major part of geothermal energy is released through ground water circulation of the expenditure incurred for power generation using geothermal energy," said NGRI deputy director T Harinarayana-20% of their electricity needs using geothermal energy. Besides efficient drilling equipment, the prevalence of volcanoes

Harinarayana, T.

89

ProfileGrids as a new visual representation of large multiple sequence alignments: a case study of the RecA protein family  

E-Print Network (OSTI)

interactions or in protein folding [72-74]. While a ligandWith respect to a protein folding role, the RecA ProfileGridmotif may be to initiate protein folding or to stabilize the

Roca, Alberto I; Almada, Albert E; Abajian, Aaron C

2008-01-01T23:59:59.000Z

90

Ab initio study on the electronic and mechanical properties of ReB and ReC  

SciTech Connect

The structural, electronic, and mechanical properties of ReB and ReC have been studied by use of the density functional theory. For each compound, six structures are considered, i.e., hexagonal WC, NiAs, wurtzite, cubic NaCl, CsCl, and zinc-blende type structures. The results indicate that for ReB and ReC, WC type structure is energetically the most stable among the considered structures, followed by NiAs type structure. ReB-WC (i.e., ReB in WC type structure) and ReB-NiAs are both thermodynamically and mechanically stable. ReC-WC and ReC-NiAs are mechanically stable and becomes thermodynamically stable above 35 and 55 GPa, respectively. The estimated hardness from shear modulus is 34 GPa for ReB-WC, 28 GPa for ReB-NiAs, 35 GPa for ReC-WC and 37 GPa for ReC-NiAs, indicating that they are potential candidates to be ultra-incompressible and hard materials. - Graphical Abstract: The enthalpy-pressure diagram for ReC from the selected structures. ReC-WC and ReC-NiAs become thermodynamically stable above 35 and 55 GPa, respectively. ReC-WC is the most stable phase.

Zhao Erjun [State Key Laboratory of Rare Earth Resource Utilization, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022 (China); Graduate School, Chinese Academy of Sciences, Beijing 100049 (China); Wang Jinping [Department of Applied Chemistry, Qingdao Agricultural University, Qingdao 266109 (China); Meng Jian [State Key Laboratory of Rare Earth Resource Utilization, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022 (China); Wu Zhijian, E-mail: zjwu@ciac.jl.c [State Key Laboratory of Rare Earth Resource Utilization, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022 (China)

2009-04-15T23:59:59.000Z

91

Feature Article  

Gasoline and Diesel Fuel Update (EIA)

Feature Article Feature Article * $ &RPSDULVRQ RI 6HOHFWHG (,$'DWD:LWK2WKHU'DWD 6RXUFHV A Comparison of Selected EIA-782 Data With Other Data Sources by Theresa E. Hallquist Introduction The Petroleum Marketing Division (PMD) of the Energy Information Administration (EIA) collects information re- lating to petroleum market prices and volumes on the EIA-782 survey. One way PMD assesses the quality of these data is to compare the data with other sources. Large, irreconcilable differences among data series could indicate the need for improvement in survey design or implementa- tion, or may be due to conceptual differences. For more de- tailed information on the EIA-782 survey, refer to the notes at the end of this article. PMD compares its EIA-782 series of petroleum market prices and volumes with both internal and external data sources

92

Building America Standing Technical Committee - Water Heating  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Water Heating Standing Technical Committee Strategic Plan, v2012a Revised: January 2012 Committee Chair: 2011, 2012 Marc Hoeschele mhoesch@davisenergy.com 530-753-1100 x23 ARBI Page 2 Background on Residential Water Heating According to the U.S. Energy Information Administration's 2005 Residential Energy Consumption Survey (RECS), annual residential water heating totals 2.11 quads of energy annually, or 20% of the energy delivered to residential buildings 1 . Over the past 70 years, gas and electric storage water heaters have been the predominant water heater type in the United States 2 . Recently, gas tankless water heaters have made inroads in market share with current industry projected gas tankless sales estimated at 400,000+ annually, and an

93

Heat Flow, Heat Transfer And Lithosphere Rheology In Geothermal Areas-  

Open Energy Info (EERE)

Flow, Heat Transfer And Lithosphere Rheology In Geothermal Areas- Flow, Heat Transfer And Lithosphere Rheology In Geothermal Areas- Features And Examples Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Heat Flow, Heat Transfer And Lithosphere Rheology In Geothermal Areas- Features And Examples Details Activities (5) Areas (5) Regions (0) Abstract: Surface heat flow measurements over active geothermal systems indicate strongly positive thermal anomalies. Whereas in "normal" geothermal settings, the surface heat flow is usually below 100-120 mW m- 2, in active geothermal areas heat flow values as high as several watts per meter squared can be found. Systematic interpretation of heat flow patterns sheds light on heat transfer mechanisms at depth on different lateral, depth and time scales. Borehole temperature profiles in active geothermal

94

ALSNews Features  

NLE Websites -- All DOE Office Websites (Extended Search)

feed-image feed-image Digg: ALSBerkeleyLab Facebook Page: 208064938929 Flickr: advancedlightsource Twitter: ALSBerkeleyLab YouTube: AdvancedLightSource Home ALSNews Features ALSNews Features Students Get a Taste of ALS User Experience Print A group of seventh graders from Black Pine Circle (BPC) school in Berkeley recently had a rare opportunity to experience the ALS as "users" via a scientific research proposal project and field trip. The students were led by science and technology teacher Christine Mytko, who spent the past summer at the ALS through the Industry Initiatives for Science and Math Education (IISME) program. Mytko's time at the ALS was focused on 3D imaging and printing techniques. An integral part of the ISME program is educators taking their experiences back to the classroom through new curriculum development. As such, Mytko put together a program that would engage her students in collaborative proposal process similar to a typical ALS user proposal. Students worked in groups to craft proposals for scanning items of interest at the tomography beamline, a selection of which were chosen through a peer-review process and then scanned at Beamline 8.3.2. ALS beamline scientist Dula Parkinson worked with Mytko to develop the program and gave feedback on the kids' proposal, which Mytko says was thrilling for her students.

95

Special Feature:  

NLE Websites -- All DOE Office Websites (Extended Search)

Five Five Questions for Sudip Dosanjh Special Feature: Five Questions for Sudip Dosanjh September 27, 2013 Sudip-wide.jpg Sudip Dosanjh Sudip Dosanjh is Director of the National Energy Research Scientific Computing (NERSC) Center at Lawrence Berkeley National Laboratory. NERSC's mission is to accelerate scientific discovery at the U.S. Department of Energy's Office of Science through high performance computing and extreme data analysis. NERSC deploys leading-edge computational and data resources for over 4,700 users from a broad range of disciplines. As a result of this support for science, NERSC users published 1,900 research papers in 2012. To continue its mission, NERSC will be partnering with computer companies to develop and deploy pre-exascale and exascale systems during the next

96

Featured Scientist  

NLE Websites -- All DOE Office Websites (Extended Search)

Chuck Ankenbrandt Chuck Ankenbrandt Chuck Ankenbrandt is our featured scientist this quarter. Chuck has been a Fermilab physicist since 1973 and is a member of the Accelerator Division. He is also heavily involved in educational activities at the Lab. As the father of five children ranging in age from 33 to 8 and the stepfather of four more, Chuck has had a lot of personal educational experience, too! Chuck, thanks for taking the time to talk with us. Would you start by telling us about your current activities at Fermilab? There are three main things now. I'm Experimental Coordinator for the Accelerator Division. I'm designing a high-intensity Fermilab Booster and I'm working with the Education Office on a variety of physics-related activities. What do you do as Experimental Coordinator?

97

The Nuclear Pore Complex and the DEAD Box Protein Rat8p/Dbp5p Have Nonessential Features Which Appear To Facilitate mRNA Export following Heat Shock  

Science Journals Connector (OSTI)

...We also examined the distribution of a Gle1p-GFP fusion...rip1 cells following heat shock (Fig. 1B...homogenous cytoplasmic distribution in rip1 cells shifted...in cytoplasmic dots. Loss of Rat8p and Gle1p from...export of all mRNAs in heat-shocked rip1 cells...

Christiane Rollenhagen; Christine A. Hodge; Charles N. Cole

2004-06-01T23:59:59.000Z

98

District Heating with Renewable Energy Webinar  

Energy.gov (U.S. Department of Energy (DOE))

This no cost Community Renewable Energy Success Stories webinar on "District Heating with Renewable Energy" presented by the Energy Department will feature two presentations. The first will discuss...

99

The RecQ4 Orthologue Hrq1 Is Critical for DNA Interstrand Cross-Link Repair and Genome Stability in Fission Yeast  

Science Journals Connector (OSTI)

...Cross-Link Repair and Genome Stability in Fission Yeast Lynda...substrates, including bubbles but not blunt duplexes...mediators of genome stability include the RecQ family...cross-link repair and genome stability in fission yeast...substrates, including bubbles but not blunt duplexes...

Lynda M. Groocock; John Prudden; J. Jefferson P. Perry; Michael N. Boddy

2011-11-07T23:59:59.000Z

100

Geothermal Heat Pumps- Heating Mode  

Energy.gov (U.S. Department of Energy (DOE))

In winter, fluid passing through this vertical, closed loop system is warmed by the heat of the earth; this heat is then transferred to the building.

Note: This page contains sample records for the topic "recs features heating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Susanville District Heating District Heating Low Temperature...  

Open Energy Info (EERE)

Susanville District Heating District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Susanville District Heating District Heating Low Temperature...

102

Solar space heating | Open Energy Information  

Open Energy Info (EERE)

heating heating Jump to: navigation, search (The following text is derived from the United States Department of Energy's description of solar space heating technology.)[1] Contents 1 Space Heating 2 Passive Solar Space Heating 3 Active Solar Space Heating 4 References Space Heating A solar space-heating system can consist of a passive system, an active system, or a combination of both. Passive systems are typically less costly and less complex than active systems. However, when retrofitting a building, active systems might be the only option for obtaining solar energy. Passive Solar Space Heating Passive solar space heating takes advantage of warmth from the sun through design features, such as large south-facing windows, and materials in the floors or walls that absorb warmth during the day and release that warmth

103

Chapter 4 - Audio Features  

Science Journals Connector (OSTI)

Abstract This chapter focuses on presenting a wide range of audio features. Apart from the theoretical background of these features and respective MATLAB code, their discrimination ability is also demonstrated for particular audio types.

Theodoros Giannakopoulos; Aggelos Pikrakis

2014-01-01T23:59:59.000Z

104

features Utility Generator  

E-Print Network (OSTI)

#12;#12;#12;#12;features function utility Training Pool Utility Generator Per-frame function content utility classes utility classes utility Tree Decision Generator Module Utility Clustering Adaptive Content Classification Loop features content VO selection & Utility Selector content features Real

Chang, Shih-Fu

105

Study of plasma heating in ohmically and auxiliary heated regimes in spherical tokamak Globus-M.  

E-Print Network (OSTI)

Study of plasma heating in ohmically and auxiliary heated regimes in spherical tokamak Globus-M. N, Russia INTRODUCTION This paper describes the basic features of the plasma heating in spherical tokamak direction in the tokamak midplane. The beam axis was aimed into the inner plasma region at the radius R = 0

Boyer, Edmond

106

Heat Stroke  

NLE Websites -- All DOE Office Websites (Extended Search)

stress, from exertion or hot environments, places stress, from exertion or hot environments, places workers at risk for illnesses such as heat stroke, heat exhaustion, or heat cramps. Heat Stroke A condition that occurs when the body becomes unable to control its temperature, and can cause death or permanent disability. Symptoms ■ High body temperature ■ Confusion ■ Loss of coordination ■ Hot, dry skin or profuse sweating ■ Throbbing headache ■ Seizures, coma First Aid ■ Request immediate medical assistance. ■ Move the worker to a cool, shaded area. ■ Remove excess clothing and apply cool water to their body. Heat Exhaustion The body's response to an excessive loss of water and salt, usually through sweating. Symptoms ■ Rapid heart beat ■ Heavy sweating ■ Extreme weakness or fatigue ■

107

Xcel Energy REC Portfolio  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Xcel Energy Renewable Resources Xcel Energy Renewable Resources Jim Hill February 7, 2012 2 Xcel Energy Overview Northern States Power Company- Minnesota Northern States Power Company- Minnesota Northern States Power Company- Minnesota Northern States Power Company- Minnesota Public Service Company of Colorado Public Service Company of Colorado Public Service Company of Colorado Public Service Company of Colorado Southwestern Public Service Southwestern Public Service Southwestern Public Service Southwestern Public Service Northern States Power Company- Wisconsin Northern States Power Company- Wisconsin Northern States Power Company- Wisconsin Northern States Power Company- Wisconsin 5 th Largest Combination Electric and Gas Utility (based on customers) 5 th Largest Combination Electric and Gas Utility (based on customers)

108

IBm1024 Inteligncia Artificial 2 Semestre/2013 Nmero Nome P1 P2 Sub MP T1 T2 T2' T3 MT L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 E1 E2 L+E F %F MF Situao Rec MR Situao aps Rec  

E-Print Network (OSTI)

L4 L5 L6 L7 L8 L9 L10 E1 E2 L+E F %F MF Situação Rec MR Situação após Rec 7961541 Amir do NascimentoIBm1024 Inteligência Artificial 2º Semestre/2013 Número Nome P1 P2 Sub MP T1 T2 T2' T3 MT L1 L2 L3 Elemam 1.4 3.5 4.4 4.0 0.0 10.0 10.0 0.0 6.7 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 1.1 5 83% 5.1

Baranauskas, José Augusto

109

1999 Commercial Buildings Characteristics--Conservation Features and  

U.S. Energy Information Administration (EIA) Indexed Site

Conservation Features and Practices Conservation Features and Practices Topics: Energy Sources and End Uses End-Use Equipment Conservation Features and Practices Conservation Features and Practices The 1999 CBECS collected information about HVAC (heating, ventilation, and air-conditioning) system, building shell, and lighting conservation features and practices plus information on off-hour reduction of end-use equipment. In general, commercial buildings that were larger than average were more likely to have used these conservation features or measures. Detailed tables HVAC Conservation Features and Practices Among HVAC conservation features and practices, commercial buildings owners and managers widely performed maintenance on their HVAC systems (Figure 1). Approximately the same percentage of buildings and floorspace were served by other HVAC conservation features.

110

Heat collector  

DOE Patents (OSTI)

A heat collector and method suitable for efficiently and cheaply collecting solar and other thermal energy are provided. The collector employs a heat pipe in a gravity-assist mode and is not evacuated. The collector has many advantages, some of which include ease of assembly, reduced structural stresses on the heat pipe enclosure, and a low total materials cost requirement. Natural convective forces drive the collector, which after startup operates entirely passively due in part to differences in molecular weights of gaseous components within the collector.

Merrigan, Michael A. (Santa Cruz, NM)

1984-01-01T23:59:59.000Z

111

Heat collector  

DOE Patents (OSTI)

A heat collector and method suitable for efficiently and cheaply collecting solar and other thermal energy are provided. The collector employs a heat pipe in a gravity-assist mode and is not evacuated. The collector has many advantages, some of which include ease of assembly, reduced structural stresses on the heat pipe enclosure, and a low total materials cost requirement. Natural convective forces drive the collector, which after startup operates entirely passively due in part to differences in molecular weights of gaseous components within the collector.

Merrigan, M.A.

1981-06-29T23:59:59.000Z

112

Latent heat of nuclear matter  

E-Print Network (OSTI)

We study the latent heat of the liquid-gas phase transition in symmetric nuclear matter using self-consistent mean-field calculations with a few Skyrme forces. The temperature dependence of the latent heat is rather independent of the mean-field parametrization and can be characterized by a few parameters. At low temperatures, the latent heat tends to the saturation energy. Near the critical point, the latent heat goes to zero with a well-determined mean-field critical exponent. A maximum value of the latent heat in the range l ~ 25-30 MeV is found at intermediate temperatures, which might have experimental relevance. All these features can be explained from very basic principles.

Arianna Carbone; Artur Polls; Arnau Rios; Isaac Vidaa

2010-12-10T23:59:59.000Z

113

NETL: Features - August 2011  

NLE Websites -- All DOE Office Websites (Extended Search)

1 1 Combined Heat and Power Technologies Have a Proven Potential to Benefit Future Energy Production Combined Heat and Power: A Two for One Deal What if electricity and heat could be generated simultaneously? Think about energy generation on a small scale, like your household. Imagine if the same source that powered your lights and turned on your television would also heat your water and home. This two for one deal-type of energy generation would maximize energy efficiency, as well as cut down on the amount of wasted energy and high energy prices. Now imagine if we could apply this technology to have an impact on a larger scale, like industrial sites or commercial buildings. The possibilities in monetary savings and environmental impact are great.

114

ARM - Feature Stories and Releases Article  

NLE Websites -- All DOE Office Websites (Extended Search)

May 13, 2009 [Feature Stories and Releases] May 13, 2009 [Feature Stories and Releases] Preparations Heat Up for Field Campaign in Chile Bookmark and Share Test period simulates daily operations for remote deployment in Atacama Desert Science and operations team members observe data transmitted from the weather balloon launched during training for RHUBC-II. Science and operations team members observe data transmitted from the weather balloon launched during training for RHUBC-II. At an elevation of more than 5000 meters on the Atacama Desert in Chile, the site for the second phase of the upcoming Radiative Heating in Underexplored Bands Campaign is not only very high, but also remote. To reduce the potential for surprises, the science and operations team completed a comprehensive beta test at the Pagosa Springs Staging Facility

115

Heating System Specification Specification of Heating System  

E-Print Network (OSTI)

Appendix A Heating System Specification /* Specification of Heating System (loosely based */ requestHeat : Room ­? bool; 306 #12; APPENDIX A. HEATING SYSTEM SPECIFICATION 307 /* user inputs */ livingPattern : Room ­? behaviour; setTemp : Room ­? num; heatSwitchOn, heatSwitchOff, userReset : simple

Day, Nancy

116

NREL: NEWS - Features  

NLE Websites -- All DOE Office Websites (Extended Search)

Bookmark and Share Printable Version Bookmark and Share Printable Version Feature News The following feature stories take an in-depth, behind-the-scenes look at how NREL is advancing energy efficiency and renewable energy technologies. You may subscribe to receive weekly news features by e-mail or via RSS feed. NREL Features RSS Feed (XML) 2013 December 2013 New Test Facility to Improve Wind Turbines New Test Facility to Improve Wind Turbines Five-megawatt dynamometer will accelerate the development of next-generation wind energy technologies. Bright Ideas Chase Investor Dollars at Forum Bright Ideas Chase Investor Dollars at Forum Annual Industry Growth Forum sponsored by NREL is where green technology seeks greenbacks. NREL Takes Efficiency to the Great Outdoors NREL Takes Efficiency to the Great Outdoors

117

Geothermal Heating and Cooling Systems Featured on NBC Nightly...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

cooling systems that are providing 30%-70% energy and cost savings for homeowners in Jordan, New York. Demand for these systems is growing; nationally, shipments of geothermal...

118

Feature Stories | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

News Releases News Releases Features 2014 2013 2012 2011 2010 Story Tips Audio Spots Honors and Awards Videos ORNL Review Magazine ORNL Reporter DOE Pulse Media Contacts Media Mentions RSS Feeds News Home | ORNL | News | Features Features ORNL's Office of Communications works with national, regional, and local media outlets on news stories about the laboratory. For more information on ORNL and its research and development activities, please refer to one of our Media Contacts. If you have a general media-related question or comment, you can send it to news@ornl.gov. 1-25 of 25 Results Comprehensive phonon "map" offers direction for engineering new thermoelectric devices January 08, 2014 - If you've ever been stuck in traffic on a hot, sunny afternoon, you might have noticed the rippling effect caused by the release

119

Environment Feature Stories  

NLE Websites -- All DOE Office Websites (Extended Search)

Environment Feature Stories Environment Feature Stories /community-environment/_assets/images/icon_earthday.jpg Environment Feature Stories Our environmental stewardship commitment: we will clean up the past, minimize impacts for current environmental operations, and create a sustainable future. Piñon trees show increased susceptibility to drought when also subjected to rising temperatures. Rising global temperatures accelerate drought-induced forest mortality Many southwestern forests in the United States will disappear or be heavily altered by 2050, according to a series of joint LANL-UNM studies. - 7/10/13 Haze of smoke emanating from the 2011 Las Conchas, NM fire. Wildfires may contribute more to global warming than previously predicted They suggest that fire emissions could contribute a lot more to the

120

Summer Feature | .EDUconnections  

Office of Scientific and Technical Information (OSTI)

Summer Feature Summer Feature U.S. DOE Office of Science Workforce Development for Teachers & Scientists WDTS plays a distinctive role in inspiring, engaging, and training the next generation of scientists, mathematicians, engineers, and technologists, in the science and technology mission of DOE. Albert Einstein Distinguished Educator Fellowship provides fellowships for elementary and secondary school mathematics and science teachers Brochure Graduate Student Awards for the Lindau Meeting of Nobel Laureates provides opportunity for U.S. doctoral students to travel to Lindau to participate in discussions with the Nobel Laureates 2011 Participants Community College Institute of Science and Technology (CCI) provides paid internships in science and engineering and technology

Note: This page contains sample records for the topic "recs features heating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Substation fire protection features  

SciTech Connect

This paper describes Commonwealth Edison`s (ComEd) approach to substation fire protection. Substation fires can have a major operational, financial, as well as political impact on a utility. The overall Company philosophy encompasses both active and passive fire protection features to provide prompt detection, notification, and confinement of fire and its by-products. Conservatively designed smoke detection systems and floor and wall penetration seals form the backbone of this strategy. The Company has implemented a program to install these features in new and existing substations. Thus far these measures have been successful in mitigating the consequences of substation fires.

Hausheer, T.G. [Commonwealth Edison Co., Chicago, IL (United States)

1995-10-01T23:59:59.000Z

122

ACR-1000 Passive Features  

SciTech Connect

The Advanced CANDU Reactor{sup TM} (ACR{sup TM}) is a Generation III+ pressure tube type reactor using light water coolant and heavy water moderator. The ACR-1000 reactor design is an evolutionary extension of the proven CANDU reactor design. The ACR-1000 incorporates multiple and diverse passive systems for accident mitigation. Where necessary, one or more features that are passive in nature have been included for mitigation of any postulated accident event. This paper describes how the use of passive design elements complements active features enhances reliability and improves safety margins. (authors)

Lekakh, Boris; Hau, Ken; Ford, Steven [Atomic Energy of Canada Ltd. (Canada)

2006-07-01T23:59:59.000Z

123

Geothermal district heating systems  

SciTech Connect

Ten district heating demonstration projects and their present status are described. The projects are Klamath County YMCA, Susanville District Heating, Klamath Falls District Heating, Reno Salem Plaza Condominium, El Centro Community Center Heating/Cooling, Haakon School and Business District Heating, St. Mary's Hospital, Diamond Ring Ranch, Pagosa Springs District Heating, and Boise District Heating.

Budney, G.S.; Childs, F.

1982-01-01T23:59:59.000Z

124

FEATURE ARTICLE Pipeline Corrosion  

E-Print Network (OSTI)

F FEATURE ARTICLE Pipeline Corrosion Issues Related to Carbon Capture, Transportation, and Storage Capture, Transportation, and Storage--Aspects of Corrosion and Materials. "Until these new technologies are developed and applied, corrosion engineers are focusing on how to best design pipelines for CO2 transport

Botte, Gerardine G.

125

NETL: Features - August 2007  

NLE Websites -- All DOE Office Websites (Extended Search)

7 7 Geologic Carbon Sequestration: Key Technology for Clean Coal Power Coal lay in ledges under the ground since the Flood, until a laborer with pick and windlass brings it to the surface. We may well call it black diamonds. Every basket is power and civilization. For coal is a portable climate. It carries the heat of the tropics to Labrador and the polar circle: and it is the means of transporting itself whithersoever it is wanted. ~Ralph Waldo Emerson The Greenhouse Effect Courtesy of U.S. Environmental Protection Agency When American essayist and poet Ralph Waldo Emerson christened coal "a portable climate" in his 1860 essay "Wealth," he was not referring to global climate change. And yet his statement that coal "carries the heat

126

Heat transfer and heat exchangers reference handbook  

SciTech Connect

The purpose of this handbook is to provide Rocky Flats personnel with an understanding of the basic concepts of heat transfer and the operation of heat exchangers.

Not Available

1991-01-15T23:59:59.000Z

127

Heating systems for heating subsurface formations  

DOE Patents (OSTI)

Methods and systems for heating a subsurface formation are described herein. A heating system for a subsurface formation includes a sealed conduit positioned in an opening in the formation and a heat source. The sealed conduit includes a heat transfer fluid. The heat source provides heat to a portion of the sealed conduit to change phase of the heat transfer fluid from a liquid to a vapor. The vapor in the sealed conduit rises in the sealed conduit, condenses to transfer heat to the formation and returns to the conduit portion as a liquid.

Nguyen, Scott Vinh (Houston, TX); Vinegar, Harold J. (Bellaire, TX)

2011-04-26T23:59:59.000Z

128

News and Features  

NLE Websites -- All DOE Office Websites (Extended Search)

News and Features: News and Features: Oak Ridge Labor-Management Prayer Breakfast donates $6,000 to Steps House, Inc. The 16th annual Oak Ridge area prayer breakfast was held on December 5, 2014, at the Cokesbury Center on Kingston Pike in Knoxville. The event drew over 400 people who contributed $3,522 to the Steps House after hearing Patrick W. White, Founder and Chief Operating Officer speak about the history of the effort to help men who are in desperation and cannot obtain help elsewhere. From two houses to now 28 half-way type houses for these veterans and others who are at the bottom of their lives through drug and alcohol abuse or other similar difficulties, White told his compelling life story. The speaker donated his honorarium and the committee added sufficient

129

Fermilab | Recovery Act | Features  

NLE Websites -- All DOE Office Websites (Extended Search)

Features - Archive Features - Archive photo Industrial Building 3 addition Fermilab Today-November 5, 2010 IB3 addition nears completion The future site of Fermilab’s new materials laboratory space has evolved from a steel outline to a fully enclosed building over the past five months. Read full column photo Fermilab Today-October 22, 2010 Recovery Act gives LBNE team chance to grow Thanks to funding from the American Recovery and Reinvestment Act, the collaboration for the Long-Baseline Neutrino Experiment, LBNE, has expanded its project team. Read full column photo cooling units Fermilab Today-October 15, 2010 Local company completes FCC roof construction A local construction company recently completed work on the roof of the Feynman Computing Center, an important step in an ongoing project funded by

130

Heat exchanger  

DOE Patents (OSTI)

A heat exchanger comparising a shell attached at its open end to one side of a tube sheet and a detachable head connected to the other side of said tube sheet. The head is divided into a first and second chamber in fluid communication with a nozzle inlet and nozzle outlet, respectively, formed in said tube sheet. A tube bundle is mounted within said shell and is provided with inlets and outlets formed in said tube sheet in communication with said first and second chambers, respectively.

Brackenbury, Phillip J. (Richland, WA)

1986-01-01T23:59:59.000Z

131

Heat exchanger  

DOE Patents (OSTI)

A heat exchanger comparising a shell attached at its open end to one side of a tube sheet and a detachable head connected to the other side of said tube sheet. The head is divided into a first and second chamber in fluid communication with a nozzle inlet and nozzle outlet, respectively, formed in said tube sheet. A tube bundle is mounted within said shell and is provided with inlets and outlets formed in said tube sheet in communication with said first and second chambers, respectively.

Brackenbury, P.J.

1983-12-08T23:59:59.000Z

132

Segmented heat exchanger  

DOE Patents (OSTI)

A segmented heat exchanger system for transferring heat energy from an exhaust fluid to a working fluid. The heat exchanger system may include a first heat exchanger for receiving incoming working fluid and the exhaust fluid. The working fluid and exhaust fluid may travel through at least a portion of the first heat exchanger in a parallel flow configuration. In addition, the heat exchanger system may include a second heat exchanger for receiving working fluid from the first heat exchanger and exhaust fluid from a third heat exchanger. The working fluid and exhaust fluid may travel through at least a portion of the second heat exchanger in a counter flow configuration. Furthermore, the heat exchanger system may include a third heat exchanger for receiving working fluid from the second heat exchanger and exhaust fluid from the first heat exchanger. The working fluid and exhaust fluid may travel through at least a portion of the third heat exchanger in a parallel flow configuration.

Baldwin, Darryl Dean (Lafayette, IN); Willi, Martin Leo (Dunlap, IL); Fiveland, Scott Byron (Metamara, IL); Timmons, Kristine Ann (Chillicothe, IL)

2010-12-14T23:59:59.000Z

133

The Sandia Hand Features  

NLE Websites -- All DOE Office Websites (Extended Search)

Sandia Hand Sandia Hand Features  Low Cost: using 3D high-resolution rapid prototyping technologies for low volumes, ensuring each component is amenable to injection molding for high volumes, and designing around components found in large consumer markets has enabled significant cost reductions  Dexterous: designed with four 3 Degree of Freedom (DOF) fingers to enable dexterous tasks such as finger gating while still maintaining form closure  Modular: a hand frame with identical finger modules that attach through magnetic attachment with electrical power and communications achieved through spring contacts. Power to each finger socket is actively controlled, permitting hot swapping of finger modules. Benefits

134

ARM - Feature Stories and Releases Article  

NLE Websites -- All DOE Office Websites (Extended Search)

July 8, 2013 [Feature Stories and Releases] July 8, 2013 [Feature Stories and Releases] Aerosol Research Heats Up During Summer Fire Season Bookmark and Share Smoke plumes rise from a forest fire. Smoke plumes rise from a forest fire. While the impacts of wildfires on people and the surrounding environment are apparent, the effect on the atmosphere from smoky soot particles-a type of aerosol-is much less so. Whether from grass, timber, or brush, each type of biological material releases its own sooty chemical signature that interacts differently with sunlight, clouds, and other particles in the sky. How does this mingling affect Earth's climate? Enter the Biomass Burning Observation Project, or BBOP. Beginning in July, scientists funded by the U.S. Department of Energy will maneuver a high-tech research aircraft into the plumes of wildfires to

135

NETL: Features - December 2008  

NLE Websites -- All DOE Office Websites (Extended Search)

8 8 Clean Coal Demonstration and Deployment: A Vital Step on the Path to a Cleaner Energy Future The Nature of Coal Coal is one of America's most valuable resources. It is affordable, plentiful, and generates more than half of the Nation's electricity. Coal or its by-products are also used for industrial heat, for steelmaking, and in the production of a variety of high-value products such as plastics, tar, synthetic fibers, fertilizers, and medicines. To take advantage of coal as an energy resource while minimizing its environmental impact, scientists, engineers, global businesses, and government organizations are working diligently to develop advanced coal technologies that provide reliable and eco-friendly answers to our energy future. They are also taking the next vital step on the path to a cleaner energy future: demonstrating these technologies at full scale and providing incentives to encourage wide-scale deployment.

136

Heat pipe cooled heat rejection subsystem modelling for nuclear electric propulsion. Final report  

SciTech Connect

NASA LeRC is currently developing a FORTRAN based computer model of a complete nuclear electric propulsion (NEP) vehicle that can be used for piloted and cargo missions to the Moon or Mars. Proposed designs feature either a Brayton or a K-Rankine power conversion cycle to drive a turbine coupled with rotary alternators. Both ion and magnetoplasmodynamic (MPD) thrusters will be considered in the model. In support of the NEP model, Rocketdyne is developing power conversion, heat rejection, and power management and distribution (PMAD) subroutines. The subroutines will be incorporated into the NEP vehicle model which will be written by NASA LeRC. The purpose is to document the heat pipe cooled heat rejection subsystem model and its supporting subroutines. The heat pipe cooled heat rejection subsystem model is designed to provide estimate of the mass and performance of the equipment used to reject heat from Brayton and Rankine cycle power conversion systems. The subroutine models the ductwork and heat pipe cooled manifold for a gas cooled Brayton; the heat sink heat exchanger, liquid loop piping, expansion compensator, pump and manifold for a liquid loop cooled Brayton; and a shear flow condenser for a K-Rankine system. In each case, the final heat rejection is made by way of a heat pipe radiator. The radiator is sized to reject the amount of heat necessary.

Moriarty, M.P.

1993-11-01T23:59:59.000Z

137

SciFeatureSciFeature SEA-MONKEYS AND ALIENS?  

E-Print Network (OSTI)

SciFeatureSciFeature MSU SEA-MONKEYS® AND ALIENS? What is the connection between Sea-Monkeys® and aliens? Believe it or not NASA scientists think it is possible that some alien life might resemble Sea

138

Hopper Featured Announcements  

NLE Websites -- All DOE Office Websites (Extended Search)

Announcements Announcements Hopper Featured Announcements Hopper OS upgrade and new SW set to default next Wed, Feb 27 February 21, 2013 by Helen He | 0 Comments 1) There will be a scheduled hardware and software maintenance for Hopper next Wednesday, February 27, from 7 am to 7 pm Pacific time. This is a major OS upgrade. Most applications are highly recommended to recompile (or at least relink) after the maintenance. C++ and PGAS applications are recommended to recompile and relink. Please plan your work accordingly and check the NERSC Message of the Day (MOTD) for status update: http://www.nersc.gov/live-status/motd/. 2) After the maintenance, the following software versions will be set to default on Hopper: -- pgi/12.9.0 -- gcc/4.7.2 -- cce/8.1.3 -- intel/13.0.1.117

139

NETL: Features - December 2009  

NLE Websites -- All DOE Office Websites (Extended Search)

9 9 Extreme Drilling Laboratory Is Ready to “Rock and Roll” The Extreme Drilling Laboratory The Extreme Drilling Laboratory is located at the NETL Morgantown site. Initial research operations will begin in 2010. The Extreme Drilling Laboratory (XDL) at the National Energy Technology Laboratory (NETL) proudly announces the much-anticipated debut of its prototype Ultra-deep Drilling Simulator (UDS), the rock star of the XDL. Drilling research will begin soon at an experimental well site with pressures reaching 30,000 pounds of force per square inch and temperatures exceeding 480 °F at the bottom of the well. One of the many unique features of this extreme drilling research is that 100 percent of the drilling will occur above ground. In addition, the UDS operating pressure

140

VEHICLE SPECIFICATIONS Vehicle Features  

NLE Websites -- All DOE Office Websites (Extended Search)

Mazda 3 Mazda 3 VIN: JMZBLA4G601111865 Seatbelt Positions: 5 Standard Features: Air Conditioning Power Locks Power Steering Power Brakes Power Windows Cruise Control Front Disc Brakes Rear Disc Brakes Front Wheel Drive Anti-Lock Brakes Traction Control Air Bags AM/FM Stereo with CD Weights Design Curb Weight: 2,954 lb Delivered Curb Weight: 2,850 lb Distribution F/R (%): 63/37 GVWR: 4,050 lb GAWR F/R: 2,057/1,896 lb Payload 1 : 1,096 lb Performance Goal: 400 lb Dimensions Wheelbase: 103.9 in Track F/R: 60.4/59.8 in Length: 175.6 in Width: 69.1 in Height: 57.9 in Ground Clearance: 6.1 in Performance Goal: 5.0 in Tires Manufacturer: Yokohama Model: YK520 Size: P205/55R17 Pressure F/R: 35/33 psi

Note: This page contains sample records for the topic "recs features heating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Salient Biological Features, Systematics,  

NLE Websites -- All DOE Office Websites (Extended Search)

Salient Salient Biological Features, Systematics, and Genetic Variation of Populus Gancho T. Slavov and Peter Zhelev Abstract The genus Populus includes morphologically diverse species of decid- uous, relatively short-lived, and fast-growing trees. Most species have wide ranges of distribution but tend to occur primarily in riparian or mountainous habitats. Trees from this genus are typically dioecious, flower before leaf emer- gence, and produce large amounts of wind-dispersed pollen or seeds. Seedlings are drought- and shade-intolerant, and their establishment depends on distur- bance and high soil moisture. Asexual reproduction is common and occurs via root sprouting and/or rooting of shoots. Fossil records suggest that the genus appeared in the late Paleocene or early Eocene (i.e., 50-60 million years BP). According to one commonly used classification, the genus is comprised

142

Advertiser retains sole responsibility for content ADVERTISEMENT FEATURE  

E-Print Network (OSTI)

between research and the private sector. At present, RMIT has over 200 active research collaborations Solar, or photovoltaic, cells are a com- mon feature in today's cities and the electricity they generate achieve 70 per cent efficiency. Plus, heat is also easier and cheaper to store than electricity

Cai, Long

143

Floatable solar heat modules  

SciTech Connect

A floating solar heat module for swimming pools comprises a solid surface for conducting heat from the sun's rays to the water and further includes a solid heat storage member for continual heating even during the night. A float is included to maintain the solar heat module on the surface of the pool. The solid heat storage medium is a rolled metal disk which is sandwiched between top and bottom heat conducting plates, the top plate receiving the heat of the sun's rays through a transparent top panel and the bottom plate transferring the heat conducted through the top plate and rolled disk to the water.

Ricks, J.W.

1981-09-29T23:59:59.000Z

144

NETL: Features - March 2013  

NLE Websites -- All DOE Office Websites (Extended Search)

13 13 On Tenth Anniversary of NETL Program, Regional Partnerships Demonstrate Clear Path to CO2 Reduction What is a Greenhouse Gas? Why is it important? And how can we reduce it? When gases trap radiant heat from the sun in Earth's atmosphere, they are called greenhouse gases. There are many such gases, but carbon dioxide (CO2) is one of the most prevalent. CO2 is a part of everyday life on this planet. It is used by plants during photosynthesis, expelled into the atmosphere during a volcanic eruption, produced as the result of decaying organic matter, and emmited during the burning of fossils fuels and other industrial activities. However, just like everything else, too much CO2 can be bad. Greenhouse gas levels in the atmosphere have increased significantly above pre-industrial revolution levels and scientists are concerned that the rising atmospheric levels of various greenhouse gases could be a contributing factor to global climate change. So the question is: how can we reduce CO2 concentrations in the atmosphere?

145

Heat Pump for High School Heat Recovery  

E-Print Network (OSTI)

ICEBO2006, Shenzhen, China Renewable Energy Resources and a Greener Future Vol.VIII-12-1 Heat Pump for High School Bathroom Heat Recovery Kunrong Huang Hanqing Wang Xiangjiang Zhou Associate professor Professor Professor School...

Huang, K.; Wang, H.; Zhou, X.

2006-01-01T23:59:59.000Z

146

Pagosa Springs District Heating District Heating Low Temperature...  

Open Energy Info (EERE)

Pagosa Springs District Heating District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Pagosa Springs District Heating District Heating Low...

147

Boise City Geothermal District Heating District Heating Low Temperatur...  

Open Energy Info (EERE)

Boise City Geothermal District Heating District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Boise City Geothermal District Heating District Heating...

148

San Bernardino District Heating District Heating Low Temperature...  

Open Energy Info (EERE)

San Bernardino District Heating District Heating Low Temperature Geothermal Facility Facility San Bernardino District Heating Sector Geothermal energy Type District Heating...

149

Kethcum District Heating District Heating Low Temperature Geothermal...  

Open Energy Info (EERE)

Kethcum District Heating District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Kethcum District Heating District Heating Low Temperature Geothermal...

150

Philip District Heating District Heating Low Temperature Geothermal...  

Open Energy Info (EERE)

Philip District Heating District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Philip District Heating District Heating Low Temperature Geothermal...

151

Midland District Heating District Heating Low Temperature Geothermal...  

Open Energy Info (EERE)

Midland District Heating District Heating Low Temperature Geothermal Facility Facility Midland District Heating Sector Geothermal energy Type District Heating Location Midland,...

152

Combined Heat and Power, Waste Heat, and District Energy | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Combined Heat and Power, Waste Heat, and District Energy Combined Heat and Power, Waste Heat, and District Energy Presentation-given at the Fall 2011 Federal Utility Partnership...

153

Waste Heat Management Options for Improving Industrial Process Heating Systems  

Energy.gov (U.S. Department of Energy (DOE))

This presentation covers typical sources of waste heat from process heating equipment, characteristics of waste heat streams, and options for recovery including Combined Heat and Power.

154

Guide to Geothermal Heat Pumps  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Geothermal Heat Pumps Work Using a heat exchanger, a geothermal heat pump can move heat from one space to another. In summer, the geothermal heat pump extracts heat from a building...

155

Woven heat exchanger  

DOE Patents (OSTI)

This invention relates to a heat exchanger for waste heat recovery from high temperature industrial exhaust streams. In a woven ceramic heat exchanger using the basic tube-in-shell design, each heat exchanger consisting of tube sheets and tube, is woven separately. Individual heat exchangers are assembled in cross-flow configuration. Each heat exchanger is woven from high temperature ceramic fiber, the warp is continuous from tube to tube sheet providing a smooth transition and unitized construction.

Piscitella, R.R.

1984-07-16T23:59:59.000Z

156

Replacing Resistance Heating with Mini-Split Heat Pumps, Sharon, Connecticut (Fact Sheet)  

SciTech Connect

Mini-split heat pumps can provide space heating and cooling in many climates and are relatively affordable. These and other features make them potentially suitable for retrofitting into multifamily buildings in cold climates to replace electric resistance heating or other outmoded heating systems. This report investigates the suitability of mini-split heat pumps for multifamily retrofits. Various technical and regulatory barriers are discussed and modeling was performed to compare long-term costs of substituting mini-splits for a variety of other heating and cooling options. A number of utility programs have retrofit mini-splits in both single family and multifamily residences. Two such multifamily programs are discussed in detail.

Not Available

2014-05-01T23:59:59.000Z

157

DHE (downhole heat exchangers). [Downhole Heat Exchangers (DHE)  

SciTech Connect

The use of downhole heat exchangers (DHE) for residential or commercial space and domestic water heating and other applications has several desirable features. Systems are nearly or completely passive -- that is, no or very little geothermal water or steam is produced from the well either reducing or completely eliminating surface environmental concerns and the need for disposal systems or injection wells. Initial cost of pumps and installation are eliminated or reduced along with pumping power costs and maintenance costs associated with pumping often corrosive geothermal fluids. Many residential and small commercial systems do not require circulating pumps because the density difference in the incoming and outgoing sides of the loop are sufficient to overcome circulating friction losses in the entire system. The major disadvantage of DHEs is their dependence on natural heat flow. In areas where geological conditions provide high permeability and a natural hydraulic gradient, DHEs can provide a substantial quantity of heat. A single 500-ft (152 m) well in Klamath Falls, Oregon, supplies over one megawatt thermal and output is apparently limited by the surface area of pipe that can be installed in the well bore. In contrast, DHEs used in conjunction with heat pumps may supply less than 8 KW from a well of similar depth. Here output is limited by conductive heat flow with perhaps a small contribution from convection near the well bore. The highest capacity DHE reported to date, in Turkey, supplies 6 MW thermal from an 820-ft (250 m) well. There were two main goals for this project. The first was to gather, disseminate and exchange internationally information on DHES. The second was to perform experiments that would provide insight into well bore/aquifer interaction and thereby provide more information on which to base DHE designs. 27 refs., 31 figs., 3 tabs.

Culver, G.

1990-11-01T23:59:59.000Z

158

Towards Intelligent District Heating.  

E-Print Network (OSTI)

??A district heating system consists of one or more production units supplying energy in the form of heated water through a distribution pipe network to (more)

Johansson, Christian

2010-01-01T23:59:59.000Z

159

Total Space Heat-  

Annual Energy Outlook 2012 (EIA)

Buildings Energy Consumption Survey: Energy End-Use Consumption Tables Total Space Heat- ing Cool- ing Venti- lation Water Heat- ing Light- ing Cook- ing Refrig- eration...

160

ARM - Heat Index Calculations  

NLE Websites -- All DOE Office Websites (Extended Search)

FAQ Just for Fun Meet our Friends Cool Sites Teachers Teachers' Toolbox Lesson Plans Heat Index Calculations Heat Index is an index that combines air temperature and relative...

Note: This page contains sample records for the topic "recs features heating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

The Ion Cyclotron, Lower Hybrid, and Alfven Wave Heating Methods  

SciTech Connect

This lecture covers the practical features and experimental results of the three heating methods. The emphasis is on ion cyclotron heating. First, we briefly come back to the main non-collisional heating mechanisms and to the particular features of the quasilinear coefficient in the ion cyclotron range of frequencies (ICRF). The specific case of the ion-ion hybrid resonance is treated, as well as the polarisation issue and minority heating scheme. The various ICRF scenarios are reviewed. The experimental applications of ion cyclotron resonance heating (ICRH) systems are outlined. Then, the lower hybrid and Alfven wave heating and current drive experimental results are covered more briefly. Where applicable, the prospects for ITER are commented.

Koch, R

2004-03-15T23:59:59.000Z

162

ARM - Features and Releases Archive  

NLE Websites -- All DOE Office Websites (Extended Search)

CenterFeaturesFeatures and Releases Archive CenterFeaturesFeatures and Releases Archive Media Contact Lynne Roeder lynne-dot-roeder-at-pnnl-dot-gov @armnewsteam Field Notes Blog Topics Field Notes89 AGU 3 AMIE 10 ARM Aerial Facility 2 ARM Mobile Facility 1 6 ARM Mobile Facility 2 47 BAECC 1 BBOP 4 MAGIC 12 MC3E 17 SGP 2 STORMVEX 29 TCAP 3 Search News Search Blog News Center All Categories What's this? Social Media Guidance News Center All Categories Features and Releases Facility News Field Notes Blog feed Events feed Employment Research Highlights Data Announcements Education News Archive What's this? Social Media Guidance Features and Releases Archive 2013 Dec 30 Pole Position: New Field Campaigns Explore Arctic and Antarctic Atmosphere Nov 13 Research Flights Completed for Biomass Burning Field Campaign Nov 07 MAGIC Takes a Bow

163

Rotary magnetic heat pump  

DOE Patents (OSTI)

A rotary magnetic heat pump constructed without flow seals or segmented rotor accomplishes recuperation and regeneration by using split flow paths. Heat exchange fluid pumped through heat exchangers and returned to the heat pump splits into two flow components: one flowing counter to the rotor rotation and one flowing with the rotation. 5 figs.

Kirol, L.D.

1987-02-11T23:59:59.000Z

164

Alaska Feature Articles and Blogs  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

resourcesalaska-feature-articles-blogs Office of Indian Energy Policy and Programs 1000 Independence Ave. SW Washington DC 20585 (202) 586-1272 en Minto Upgrades Community Lodge...

165

Thulium-170 heat source  

SciTech Connect

An isotopic heat source is formed using stacks of thin individual layers of a refractory isotopic fuel, preferably thulium oxide, alternating with layers of a low atomic weight diluent, preferably graphite. The graphite serves several functions: to act as a moderator during neutron irradiation, to minimize bremsstrahlung radiation, and to facilitate heat transfer. The fuel stacks are inserted into a heat block, which is encased in a sealed, insulated and shielded structural container. Heat pipes are inserted in the heat block and contain a working fluid. The heat pipe working fluid transfers heat from the heat block to a heat exchanger for power conversion. Single phase gas pressure controls the flow of the working fluid for maximum heat exchange and to provide passive cooling.

Walter, C.E.; Van Konynenburg, R.; VanSant, J.H.

1990-09-06T23:59:59.000Z

166

Thulium-170 heat source  

DOE Patents (OSTI)

An isotopic heat source is formed using stacks of thin individual layers of a refractory isotopic fuel, preferably thulium oxide, alternating with layers of a low atomic weight diluent, preferably graphite. The graphite serves several functions: to act as a moderator during neutron irradiation, to minimize bremsstrahlung radiation, and to facilitate heat transfer. The fuel stacks are inserted into a heat block, which is encased in a sealed, insulated and shielded structural container. Heat pipes are inserted in the heat block and contain a working fluid. The heat pipe working fluid transfers heat from the heat block to a heat exchanger for power conversion. Single phase gas pressure controls the flow of the working fluid for maximum heat exchange and to provide passive cooling.

Walter, Carl E. (Pleasanton, CA); Van Konynenburg, Richard (Livermore, CA); VanSant, James H. (Tracy, CA)

1992-01-01T23:59:59.000Z

167

Heat Treating Apparatus  

DOE Patents (OSTI)

Apparatus for heat treating a heat treatable material including a housing having an upper opening for receiving a heat treatable material at a first temperature, a lower opening, and a chamber therebetween for heating the heat treatable material to a second temperature higher than the first temperature as the heat treatable material moves through the chamber from the upper to the lower opening. A gas supply assembly is operatively engaged to the housing at the lower opening, and includes a source of gas, a gas delivery assembly for delivering the gas through a plurality of pathways into the housing in countercurrent flow to movement of the heat treatable material, whereby the heat treatable material passes through the lower opening at the second temperature, and a control assembly for controlling conditions within the chamber to enable the heat treatable material to reach the second temperature and pass through the lower opening at the second temperature as a heated material.

De Saro, Robert (Annandale, NJ); Bateman, Willis (Sutton Colfield, GB)

2002-09-10T23:59:59.000Z

168

Thermoelectric heat exchange element  

DOE Patents (OSTI)

A thermoelectric heat exchange module includes a first substrate including a heat receptive side and a heat donative side and a series of undulatory pleats. The module may also include a thermoelectric material layer having a ZT value of 1.0 or more disposed on at least one of the heat receptive side and the heat donative side, and an electrical contact may be in electrical communication with the thermoelectric material layer.

Callas, James J. (Peoria, IL); Taher, Mahmoud A. (Peoria, IL)

2007-08-14T23:59:59.000Z

169

Heat Integrate Heat Engines in Process Plants  

E-Print Network (OSTI)

and refrigeration systems. In many instances these real heat engines may appear as a complex process consisting of flash vessels, heat exchangers, compressors, furnaces, etc. See Figure 18a, which shows a simplified diagram of a "steam Rankine cycle." How... and rejection profiles of the real machine. For example, the heat acceptance and re jection profiles for the steam Rankine cycle shown in Figure 18a have been drawn on T,H coordinates in Figure 18b. Thus providing we know the heat acceptance and rejection...

Hindmarsh, E.; Boland, D.; Townsend, D. W.

170

ARM - Feature Stories and Releases Article  

NLE Websites -- All DOE Office Websites (Extended Search)

September 25, 2009 Feature Stories and Releases Nature Magazine Features Mobile Facility Deployment In China Bookmark and Share A news feature published in Vol. 461 of Nature...

171

Innovative safety features of the modular HTGR  

SciTech Connect

The Modular High Temperature Gas-Cooled Reactor (MHTGR) is an advanced reactor concept under development through a cooperative program involving the US Government, the nuclear industry, and the utilities. Near-term development is focused on electricity generation. The top-level safety requirement is that the plant's operation not disturb the normal day-to-day activities of the public. Quantitatively, this requires that the design meet the US Environmental Protection Agency's Protective Action Guides at the site boundary and hence preclude the need for sheltering or evacuation of the public. To meet these stringent safety requirements and at the same time provide a cost competitive design requires the innovative use of the basic high temperature gas-cooled reactor features of ceramic fuel, helium coolant, and a graphite moderator. The specific fuel composition and core size and configuration have been selected to the use the natural characteristics of these materials to develop significantly higher margins of safety. In this document the innovative safety features of the MHTGR are reviewed by examining the safety response to events challenging the functions relied on to retain radionuclides within the coated fuel particles. A broad range of challenges to core heat removal are examined, including a loss of helium pressure of a simultaneous loss of forced cooling of the core. The challenges to control of heat generation consider not only the failure to insert the reactivity control systems but also the withdrawal of control rods. Finally, challenges to control of chemical attack of the ceramic-coated fuel are considered, including catastrophic failure of the steam generator, which allows water ingress, or failure of the pressure vessels, which allows air ingress. The plant's response to these extreme challenges is not dependent on operator action, and the events considered encompass conceivable operator errors.

Silady, F.A.; Simon, W.A.

1992-01-01T23:59:59.000Z

172

Innovative safety features of the modular HTGR  

SciTech Connect

The Modular High Temperature Gas-Cooled Reactor (MHTGR) is an advanced reactor concept under development through a cooperative program involving the US Government, the nuclear industry, and the utilities. Near-term development is focused on electricity generation. The top-level safety requirement is that the plant`s operation not disturb the normal day-to-day activities of the public. Quantitatively, this requires that the design meet the US Environmental Protection Agency`s Protective Action Guides at the site boundary and hence preclude the need for sheltering or evacuation of the public. To meet these stringent safety requirements and at the same time provide a cost competitive design requires the innovative use of the basic high temperature gas-cooled reactor features of ceramic fuel, helium coolant, and a graphite moderator. The specific fuel composition and core size and configuration have been selected to the use the natural characteristics of these materials to develop significantly higher margins of safety. In this document the innovative safety features of the MHTGR are reviewed by examining the safety response to events challenging the functions relied on to retain radionuclides within the coated fuel particles. A broad range of challenges to core heat removal are examined, including a loss of helium pressure of a simultaneous loss of forced cooling of the core. The challenges to control of heat generation consider not only the failure to insert the reactivity control systems but also the withdrawal of control rods. Finally, challenges to control of chemical attack of the ceramic-coated fuel are considered, including catastrophic failure of the steam generator, which allows water ingress, or failure of the pressure vessels, which allows air ingress. The plant`s response to these extreme challenges is not dependent on operator action, and the events considered encompass conceivable operator errors.

Silady, F.A.; Simon, W.A.

1992-01-01T23:59:59.000Z

173

Plasma heating and hot ion sustaining in mirror based hybrids  

SciTech Connect

Possibilities of plasma heating and sloshing ion sustaining in mirror based hybrids are briefly reviewed. Sloshing ions, i.e. energetic ions with a velocity distribution concentrated to a certain pitch-angle, play an important role in plasma confinement and generation of fusion neutrons in mirror machines. Neutral beam injection (NBI) is first discussed as a method to generate sloshing ions. Numerical results of NBI modeling for a stellarator-mirror hybrid are analyzed. The sloshing ions could alternatively be sustained by RF heating. Fast wave heating schemes, i.e. magnetic beach, minority and second harmonic heating, are addressed and their similarities and differences are described. Characteristic features of wave propagation in mirror hybrid devices including both fundamental harmonic minority and second harmonic heating are examined. Minority heating is efficient for a wide range of minority concentration and plasma densities; it allows one to place the antenna aside from the hot ion location. A simple-design strap antenna suitable for this has good performance. However, this scenario is appropriate only for light minority ions. The second harmonic heating can be applied for the heavy ion component. Arrangements are similar for minority and second harmonic heating. The efficiency of second harmonic heating is influenced by a weaker wave damping than for minority heating. Numerical calculations show that in a hybrid reactor scaled mirror machine the deuterium sloshing ions could be heated within the minority heating scheme, while the tritium ions could be sustained by second harmonic heating.

Moiseenko, V. E.; Agren, O. [Institute of Plasma Physics, National Science Center 'Kharkiv Institute of Physics and Technology', Akademichna St. 1, 61108 Kharkiv (Ukraine); Uppsala University, Angstroem Laboratory, Division of Electricity, Box 534, SE-75121 Uppsala (Sweden)

2012-06-19T23:59:59.000Z

174

REC Solar | Open Energy Information  

Open Energy Info (EERE)

67 Commercial Street 67 Commercial Street Place Sunnyvale, California Zip 94086 Sector Solar Product Solar installer Website http://www.recsolar.com/cm/Hom Coordinates 37.3754586°, -122.0085828° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.3754586,"lon":-122.0085828,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

175

Performance of the Second Generation Solar Heating System in the Solar House of the Eindhoven University of Technology  

Science Journals Connector (OSTI)

Summer 1981 a new solar heating system has been installed in the Solar House at the E.U.T. The principal features of the system are Philips VTR 261 evacuated tube collectors, integration of the auxiliary heate...

R. W. G. Bisschops; C. W. J. van Koppen

1984-01-01T23:59:59.000Z

176

Heat transfer system  

DOE Patents (OSTI)

A heat transfer system for a nuclear reactor. Heat transfer is accomplished within a sealed vapor chamber which is substantially evacuated prior to use. A heat transfer medium, which is liquid at the design operating temperatures, transfers heat from tubes interposed in the reactor primary loop to spaced tubes connected to a steam line for power generation purposes. Heat transfer is accomplished by a two-phase liquid-vapor-liquid process as used in heat pipes. Condensible gases are removed from the vapor chamber through a vertical extension in open communication with the chamber interior.

McGuire, Joseph C. (Richland, WA)

1982-01-01T23:59:59.000Z

177

Wound tube heat exchanger  

DOE Patents (OSTI)

What is disclosed is a wound tube heat exchanger in which a plurality of tubes having flattened areas are held contiguous adjacent flattened areas of tubes by a plurality of windings to give a double walled heat exchanger. The plurality of windings serve as a plurality of effective force vectors holding the conduits contiguous heat conducting walls of another conduit and result in highly efficient heat transfer. The resulting heat exchange bundle is economical and can be coiled into the desired shape. Also disclosed are specific embodiments such as the one in which the tubes are expanded against their windings after being coiled to insure highly efficient heat transfer.

Ecker, Amir L. (Duncanville, TX)

1983-01-01T23:59:59.000Z

178

Heat Exchangers for Solar Water Heating Systems | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Heat Exchangers for Solar Water Heating Systems Heat Exchangers for Solar Water Heating Systems Heat Exchangers for Solar Water Heating Systems May 30, 2012 - 3:40pm Addthis Image of a heat exchanger. | Photo from iStockphoto.com Image of a heat exchanger. | Photo from iStockphoto.com Solar water heating systems use heat exchangers to transfer solar energy absorbed in solar collectors to the liquid or air used to heat water or a space. Heat exchangers can be made of steel, copper, bronze, stainless steel, aluminum, or cast iron. Solar heating systems usually use copper, because it is a good thermal conductor and has greater resistance to corrosion. Types of Heat Exchangers Solar water heating systems use three types of heat exchangers: Liquid-to-liquid A liquid-to-liquid heat exchanger uses a heat-transfer fluid that

179

Lakeland Electric - Solar Water Heating Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lakeland Electric - Solar Water Heating Program Lakeland Electric - Solar Water Heating Program Lakeland Electric - Solar Water Heating Program < Back Eligibility Residential Savings Category Heating & Cooling Solar Water Heating Program Info Start Date June 2010 State Florida Program Type Other Incentive Provider Lakeland Electric Lakeland Electric, a municipal utility in Florida, is the nation's first utility to offer solar-heated domestic hot water on a "pay-for-energy" basis. The utility has contracted with a solar equipment vendor, Regenesis Lakeland, LLC, to install solar water heaters on participating customers' homes. Lakeland Electric bills the customer $34.95 per month regardless of use. Each solar heater is metered and equipped with a heating element timer as a demand management feature. The $34.95 monthly charge is a bulk energy

180

Entangled topological features of light  

E-Print Network (OSTI)

We report the entanglement of topological features, namely, isolated, linked optical vortex loops in the light from spontaneous parametric down-conversion (SPDC). In three dimensions, optical vortices are lines of phase singularity and vortices of energy flow which percolate through all optical fields. This example of entanglement is between features that extend over macroscopic and finite volumes, furthermore, topological features are robust to perturbation . The entanglement of photons in complex three-dimensional(3D) topological states suggests the possibility of entanglement of similar structures in other quantum systems describable by complex scalar functions, such as superconductors, superfluids and Bose-Einstein condensates.

J. Romero; J. Leach; B. Jack; M. R. Dennis; S. Franke-Arnold; S. M. Barnett; M. J. Padgett

2010-08-26T23:59:59.000Z

Note: This page contains sample records for the topic "recs features heating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Geothermal Heat Pumps  

Energy.gov (U.S. Department of Energy (DOE))

The Geothermal Technologies Office focuses only on electricity generation. For additional information about geothermal heating and cooling and ground source heat pumps, please visit the U.S. Department of Energy (DOE)'s Buildings Technologies Office.

182

HEAT TRANSFER FLUIDS  

E-Print Network (OSTI)

The choice of heat transfer fluids has significant effects on the performance, cost, and reliability of solar thermal systems. In this chapter, we evaluate existing heat transfer fluids such as oils and molten salts based ...

Lenert, Andrej

2012-01-01T23:59:59.000Z

183

Residential heating oil price  

Annual Energy Outlook 2012 (EIA)

heating oil price decreases The average retail price for home heating oil fell 6.3 cents from a week ago to 2.91 per gallon. That's down 1.10 from a year ago, based on the...

184

Residential heating oil price  

U.S. Energy Information Administration (EIA) Indexed Site

heating oil price decreases The average retail price for home heating oil fell 7.5 cents from a week ago to 2.84 per gallon. That's down 1.22 from a year ago, based on the...

185

Residential heating oil price  

NLE Websites -- All DOE Office Websites (Extended Search)

heating oil price decreases The average retail price for home heating oil fell 7.6 cents from a week ago to 2.97 per gallon. That's down 1.05 from a year ago, based on the...

186

Residential heating oil price  

NLE Websites -- All DOE Office Websites (Extended Search)

heating oil price decreases The average retail price for home heating oil fell 3.6 cents from a week ago to 3.04 per gallon. That's down 99.4 cents from a year ago, based on the...

187

The effects of topology upon fluid-flow and heat-transfer within cellular copper structures  

E-Print Network (OSTI)

The effects of topology upon fluid-flow and heat-transfer within cellular copper structures J. Tian February 2004 Available online 20 March 2004 Abstract The fluid-flow and heat-transfer features of cellular and packed beds, but also a function of orientation (open area ratio). The overall heat transfer depends

Wadley, Haydn

188

The effects of topology upon fluid-flow and heat-transfer within cellular copper structures  

E-Print Network (OSTI)

1 The effects of topology upon fluid-flow and heat-transfer within cellular copper structures J The fluid-flow and heat-transfer features of copper cellular metal structures made by the transient liquid media. The experimental results for pressure drop and heat transfer were expressed on the basis

Wadley, Haydn

189

Newsletter Features | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

About Us » News & Blog » Newsletter Features About Us » News & Blog » Newsletter Features Newsletter Features Below are featured articles from the Indian Energy Beat newsletter. Download full issues of the newsletter. September 6, 2013 The Eastern Band of Cherokee Indians and the Mississippi Band of Choctaw Indians are converting waste vegetable oil and grease to biofuel in an effort to reduce the environmental impact of their energy use. Fuel from Waste Helps Power Two Tribes The Eastern Band of Cherokee Indians and the Mississippi Band of Choctaw Indians had plenty of used vegetable oil and grease on hand and a desire to convert the waste to biofuel to reduce the environmental impact of their energy use. The Tribes participated in a demonstration project with the intent to share their experience and lessons learned so that other Tribes

190

MagLab Feature Stories  

NLE Websites -- All DOE Office Websites (Extended Search)

problem-solve in a world-class laboratory. Read more. 2013 Feature Stories Date Subject December 17 MagLab Mentors Middle-Schoolers November 26 MagLab User Awarded the 2014...

191

MA HEAT Loan Overview  

Energy.gov (U.S. Department of Energy (DOE))

Presents information on the success of Massachusetts's HEAT loan offerings and how the financing tool is funded.

192

Ductless Heat Pumps  

NLE Websites -- All DOE Office Websites (Extended Search)

Water Heaters Showerheads Residential Weatherization Performance Tested Comfort Systems Ductless Heat Pumps New Construction Residential Marketing Toolkit Retail Sales...

193

Heat Pump Water Heaters  

NLE Websites -- All DOE Office Websites (Extended Search)

Water Heaters Showerheads Residential Weatherization Performance Tested Comfort Systems Ductless Heat Pumps New Construction Residential Marketing Toolkit Retail Sales...

194

Solar heat receiver  

DOE Patents (OSTI)

A receiver is described for converting solar energy to heat a gas to temperatures from 700 to 900/sup 0/C. The receiver is formed to minimize impingement of radiation on the walls and to provide maximum heating at and near the entry of the gas exit. Also, the receiver is formed to provide controlled movement of the gas to be heated to minimize wall temperatures. The receiver is designed for use with gas containing fine heat absorbing particles, such as carbon particles.

Hunt, A.J.; Hansen, L.J.; Evans, D.B.

1982-09-29T23:59:59.000Z

195

Electric resistive space heating  

Science Journals Connector (OSTI)

The cost of heating residential buildings using electricity is compared to the cost employing gas or oil. (AIP)

David Bodansky

1985-01-01T23:59:59.000Z

196

Liquid heat capacity lasers  

DOE Patents (OSTI)

The heat capacity laser concept is extended to systems in which the heat capacity lasing media is a liquid. The laser active liquid is circulated from a reservoir (where the bulk of the media and hence waste heat resides) through a channel so configured for both optical pumping of the media for gain and for light amplification from the resulting gain.

Comaskey, Brian J. (Walnut Creek, CA); Scheibner, Karl F. (Tracy, CA); Ault, Earl R. (Livermore, CA)

2007-05-01T23:59:59.000Z

197

Heat Transfer Guest Editorial  

E-Print Network (OSTI)

Journal of Heat Transfer Guest Editorial We are indeed delighted in bringing out this special issue was showcased in diverse areas such as traditional heat and mass transfer, lab-on-chip, sensors, biomedical applica- tions, micromixers, fuel cells, and microdevices. Selected papers in the field of heat transfer

Kandlikar, Satish

198

Acoustic Heating Peter Ulmschneider  

E-Print Network (OSTI)

Acoustic Heating Peter Ulmschneider lnstitut fiir Theoretische Astrophysik der Universitat waves are a viable and prevalent heating mechanism both in early- and in late-type stars. Acoustic heating appears to be a dominant mechanism for situations where magnetic fields are weak or absent

Ulmschneider, Peter

199

Ammoniated salt heat pump  

SciTech Connect

A thermochemical heat pump/energy storage system using liquid ammoniate salts is described. The system, which can be used for space heating or cooling, provides energy storage for both functions. The bulk of the energy is stored as chemical energy and thus can be stored indefinitely. The system is well suited to use with a solar energy source or industrial waste heat.

Haas, W.R.; Jaeger, F.J.; Giordano, T.J.

1981-01-01T23:59:59.000Z

200

Pioneering Heat Pump Project  

Energy.gov (U.S. Department of Energy (DOE))

Project objectives: To install and monitor an innovative WaterFurnace geothermal system that is technologically advanced and evolving; To generate hot water heating from a heat pump that uses non-ozone depleting refrigerant CO2. To demonstrate the energy efficiency of this system ground source heat pump system.

Note: This page contains sample records for the topic "recs features heating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Home Heating | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Home Heating Everything you need to know about home heating, including how heating systems work, the different types on the market and proper maintenance. Read more Thermostats...

202

Water Heating | Department of Energy  

Energy Savers (EERE)

Energy Saver Water Heating Water Heating Infographic: Water Heaters 101 Infographic: Water Heaters 101 Everything you need to know about saving money on water heating costs....

203

Feature  

NLE Websites -- All DOE Office Websites (Extended Search)

Explains Vehicle Technologies to Illinois Companies and Government Explains Vehicle Technologies to Illinois Companies and Government Illinois chamber of commerce Attendees lined up for the test drive opportunities. On August 16, 2011, Argonne participated in the event, "Taking the Future Out for a Spin," organized by the Illinois Chamber of Commerce and held at the Autobahn Racing Country Club in Joliet, Il. Argonne researchers Glenn Keller and Henning Lohse-Busch were on hand to help attendees understand the advanced technology vehicles at the event. Lohse-Busch gave a presentation titled, "Current and Future Trends in Alternative Fuel Vehicles: A Research Perspective." Folks attending had the opportunity to drive a variety of advanced hybrid cars, including plug-in hybrids, electric vehicles and natural gas vehicles around a one and one-half mile closed racing course. Car manufacturers Chevy, Nissan, Tesla, Think, Mitsubishi and Ford provided electric vehicles, including the Chevy Volt and Nissan Leaf. Hybrid vehicles were provided by Toyota, Porsche, Kia, Cadillac and Ford. Chevy, VPG, Green Alternative Systems and Freightliner provided vehicles that run on compressed natural gas.

204

FEATURES:  

Science Journals Connector (OSTI)

......America's latest geostationary weather satellite, GOES-12, will also improve forecasts of space weather. A NASA-built Solar...activity and forecast space weather disturbances that can destroy satellite electronics, disrupt long-distance......

Space shorts

2003-04-01T23:59:59.000Z

205

FEATURES:  

Science Journals Connector (OSTI)

......the past decades. A change in the solar climate would bring different...a sort of solar climate change Sunskimmers and sunplungers...universities, schools and companies; these three identical...according to project leader Bob Lin of University......

NAM 2012 in Manchester

2012-06-01T23:59:59.000Z

206

Residential Heating Oil Prices  

Gasoline and Diesel Fuel Update (EIA)

This chart highlights residential heating oil prices for the current and This chart highlights residential heating oil prices for the current and past heating season. As you can see, prices have started the heating season, about 40 to 50 cents per gallon higher than last year at this time. The data presented are from EIA's State Heating Oil and Propane Program. We normally collect and publish this data twice a month, but given the low stocks and high prices, we started tracking the prices weekly. These data will also be used to determine the price trigger mechanism for the Northeast Heating Oil Reserve. The data are published at a State and regional level on our web site. The slide is to give you some perspective of what is happening in these markets, since you probably will get a number of calls from local residents about their heating fuels bills

207

Active microchannel heat exchanger  

DOE Patents (OSTI)

The present invention is an active microchannel heat exchanger with an active heat source and with microchannel architecture. The microchannel heat exchanger has (a) an exothermic reaction chamber; (b) an exhaust chamber; and (c) a heat exchanger chamber in thermal contact with the exhaust chamber, wherein (d) heat from the exothermic reaction chamber is convected by an exothermic reaction exhaust through the exhaust chamber and by conduction through a containment wall to the working fluid in the heat exchanger chamber thereby raising a temperature of the working fluid. The invention is particularly useful as a liquid fuel vaporizer and/or a steam generator for fuel cell power systems, and as a heat source for sustaining endothermic chemical reactions and initiating exothermic reactions.

Tonkovich, Anna Lee Y. (Pasco, WA) [Pasco, WA; Roberts, Gary L. (West Richland, WA) [West Richland, WA; Call, Charles J. (Pasco, WA) [Pasco, WA; Wegeng, Robert S. (Richland, WA) [Richland, WA; Wang, Yong (Richland, WA) [Richland, WA

2001-01-01T23:59:59.000Z

208

Nanofluid heat capacities  

Science Journals Connector (OSTI)

Significant increases in the heat capacity of heat transfer fluids are needed not only to reduce the costs of liquid heating and cooling processes but also to bring clean energy producing technologies like concentrating solar power (CSP) to price parity with conventional energy generation. It has been postulated that nanofluids could have higher heat capacities than conventional fluids. In this work nano- and micron-sized particles were added to five base fluids (poly-? olefin mineral oil ethylene glycol a mixture of water and ethylene glycol and calcium nitrate tetrahydrate) and the resulting heat capacities were measured and compared with those of the neat base fluids and the weighted average of the heat capacities of the components. The particles used were inert metals and metal oxides that did not undergo any phase transitions over the temperature range studied. In the nanofluids studied here we found no increase in heat capacity upon the addition of the particles larger than the experimental error.

Anne K. Starace; Judith C. Gomez; Jun Wang; Sulolit Pradhan; Greg C. Glatzmaier

2011-01-01T23:59:59.000Z

209

A model for improvement of water heating heat exchanger designs for residential heat pump water heaters.  

E-Print Network (OSTI)

??Heat pump water heaters are a promising technology to reduce energy use and greenhouse gas emissions. A key component is the water heating heat exchanger. (more)

Weerawoot, Arunwattana

2010-01-01T23:59:59.000Z

210

PERFORMANCE OF A STIRLING ENGINE POWERED HEAT ACTIVATED HEAT PUMP  

E-Print Network (OSTI)

PERFORMANCE OF A STIRLING ENGINE POWERED HEAT ACTIVATED HEAT PUMP W. D. C. Richards and W. L. Auxer General Electric Company Space Division King of Prussia, Pa. ABSTRACT A heat activated heat pump (HAHP for space heating since it directly utilizes the engine waste heat in addition to the energy obtained

Oak Ridge National Laboratory

211

Field Test of High Efficiency Residential Buildings with Ground-source and Air-source Heat Pump Systems  

SciTech Connect

This paper describes the field performance of space conditioning and water heating equipment in four single-family residential structures with advanced thermal envelopes. Each structure features a different, advanced thermal envelope design: structural insulated panel (SIP); optimum value framing (OVF); insulation with embedded phase change materials (PCM) for thermal storage; and exterior insulation finish system (EIFS). Three of the homes feature ground-source heat pumps (GSHPs) for space conditioning and water heating while the fourth has a two-capacity air-source heat pump (ASHP) and a heat pump water heater (HPWH). Two of the GCHP-equipped homes feature horizontal ground heat exchange (GHX) loops that utillize the existing foundation and utility service trenches while the third features a vertical borehole with vertical u-tube GHX. All of the houses were operated under the same simulated occupancy conditions. Operational data on the house HVAC/Water heating (WH) systems are presented and factors influencing overall performance are summarized.

Ally, Moonis Raza [ORNL] [ORNL; Munk, Jeffrey D [ORNL] [ORNL; Baxter, Van D [ORNL] [ORNL

2011-01-01T23:59:59.000Z

212

Solar collector for fluid heating system  

SciTech Connect

A solar collector for use in either an upfeed forced hot water heating system or a downfeed system features a pair of serpentine coils arranged in opposing flow relationship within a shallow insulated collector housing having a sealed glass closure panel. The two serpentine coils lie in spaced parallel planes within the housing, and the two coils are offset laterally so that their individual longitudinal loops overlap laterally by approximately one-half the width of each loop. The flow of heated fluid in each serpentine coil is controlled independently of the other coil by a temperature-responsive modulating valve connected in each coil close to the outlet end thereof within the housing. Efficiency of operation and practicality and economy of construction are featured.

Wilson, D.C.

1980-09-30T23:59:59.000Z

213

+ . -. . -. . .__ .. .. -..---. ---.. . --. --. -. L IA Science Service Feature  

E-Print Network (OSTI)

, "the bent'' - i.e.9 ''Also it is P l * t l Y the A l l The thermometer reading alone merely tella us with heat vhen the thermometer the temperature of the air to be far below freezing. In Arizona people mny

214

News Features | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

News & Awards News & Awards News Releases Honors & Awards News Features Advanced Materials Home | Science & Discovery | Advanced Materials | News & Awards | News Features News Features 1-2 of 2 Results Nanotech toolbox July 01, 2013 - One of the most remarkable aspects of this super-small-scale world is that, under the right conditions, bits and pieces of materials will put themselves together-a natural phenomenon known as self-assembly. For example, polymer molecules, like the ones used to make plastic bags, organize themselves into a variety of structures based on what's going on in their environment. New family of tiny crystals glow bright in LED lights May 23, 2013 - Minuscule crystals that glow different colors may be the missing ingredient for white LED lighting that illuminates homes and

215

Radio frequency (RF) heated supersonic flow laboratory  

SciTech Connect

A unique supersonic flow apparatus which employs an inductively-coupled, radio frequency (RF) torch to supply high enthalpy source gas to the nozzle inlet is described. The main features of this system are the plasma tube, a cooled nozzle assembly, and a combustion/expansion chamber with a heat exchanger. A description of these components with current test data is presented. In addition, a discussion of anticipated experiments utilizing this system is included.

Wantuck, P.; Watanabe, H.

1990-01-01T23:59:59.000Z

216

Feature Stories | Argonne National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Feature Stories Feature Stories Topic - Any - Energy -Energy efficiency --Vehicles ---Alternative fuels ---Automotive engineering ---Biofuels ---Diesel ---Electric drive technology ---Hybrid & electric vehicles ---Hydrogen & fuel cells ---Internal combustion ---Powertrain research ---Vehicle testing --Building design --Manufacturing -Energy sources --Renewable energy ---Bioenergy ---Hydropower ---Solar energy ---Wind energy --Hydrogen --Nuclear energy ---Nuclear energy modeling & simulation ---Nuclear fuel cycle ----Geology & disposal ---Reactors ----Nuclear reactor safety ----Nuclear reactor materials ----Nuclear system technologies & diagnostics -Energy usage --Energy life-cycle analysis --Energy storage ---Batteries ----Lithium-ion batteries ----Lithium-air batteries ----Sodium batteries --Electricity

217

Featured Webinars | Open Energy Information  

Open Energy Info (EERE)

Featured Webinars Featured Webinars Jump to: navigation, search This page highlights the webinars conducted by the Coordinated Low Emissions Assistance Network, Clean Energy Solutions Center, Enhancing Capacity for Low Emissions Development Strategies program, and the LEDS Global Dialogue Working Group. Finance Webinars CESC-Webinar: Building an Innovation and Entrepreneurship Driven Economy: How Policies Can Foster Risk Capital Investment in Renewable Energy CESC-Webinar: Financial and Policy Innovations to Support Energy Efficiency: Energy Performance Contracting and On-Bill Financing Implementation Webinars GHG Inventory Webinars Low-carbon plans/TNAs/NAMAs Webinars CLEAN-Capacity Building and Training for Low Emissions Development Planning CLEAN-Linked Open Data (LOD) Webinar

218

Heat pump system  

DOE Patents (OSTI)

An air heating and cooling system for a building includes an expansion type refrigeration circuit and a vapor power circuit. The refrigeration circuit includes two heat exchangers, one of which is communicated with a source of indoor air from the building and the other of which is communicated with a source of air from outside the building. The vapor power circuit includes two heat exchangers, one of which is disposed in series air flow relationship with the indoor refrigeration circuit heat exchanger and the other of which is disposed in series air flow relationship with the outdoor refrigeration circuit heat exchanger. Fans powered by electricity generated by a vapor power circuit alternator circulate indoor air through the two indoor heat exchangers and circulate outside air through the two outdoor heat exchangers. The system is assembled as a single roof top unit, with a vapor power generator and turbine and compressor thermally insulated from the heat exchangers, and with the indoor heat exchangers thermally insulated from the outdoor heat exchangers.

Swenson, Paul F. (Shaker Heights, OH); Moore, Paul B. (Fedhaven, FL)

1983-01-01T23:59:59.000Z

219

Policies supporting Heat Pump Technologies  

E-Print Network (OSTI)

Policies supporting Heat Pump Technologies in Canada IEA Heat Pump Workshop London, UK November 13 in the world, with an average of 16,995 kilowatt-hours per annum. #12;Canada's Context for Heat Pumps Impacts avenues: Ground source heat pumps for cold climates (heating and cooling) Reversible air source heat

Oak Ridge National Laboratory

220

Mini-Split Heat Pumps Multifamily Retrofit Feasibility Study  

SciTech Connect

Mini-split heat pumps can provide space heating and cooling in many climates and are relatively affordable. These and other features make them potentially suitable for retrofitting into multifamily buildings in cold climates to replace electric resistance heating or other outmoded heating systems. This report investigates the suitability of mini-split heat pumps for multifamily retrofits. Various technical and regulatory barriers are discussed and modeling was performed to compare long-term costs of substituting mini-splits for a variety of other heating and cooling options. A number of utility programs have retrofit mini-splits in both single family and multifamily residences. Two such multifamily programs are discussed in detail.

Dentz, J.; Podorson, D.; Varshney, K.

2014-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "recs features heating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

heat transfer | OpenEI Community  

Open Energy Info (EERE)

85 85 Varnish cache server Home Groups Community Central Green Button Applications Developer Utility Rate FRED: FRee Energy Database More Public Groups Private Groups Features Groups Blog posts Content Stream Documents Discussions Polls Q & A Events Notices My stuff Energy blogs 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142229585 Varnish cache server heat transfer Home Dc's picture Submitted by Dc(15) Member 15 November, 2013 - 13:26 Living Walls ancient building system architect biomimicry building technology cooling cu daylight design problem energy use engineer fred andreas geothermal green building heat transfer heating living walls metabolic adjustment net zero pre-electricity Renewable Energy Solar university of colorado utility grid Wind

222

Foundation House, New York, geothermal heat pump  

SciTech Connect

The Foundation House, planned to house half a dozen nonprofit foundations, will be constructed on 64th Street just east of Central Park in Manhattan, New York. It is in a Landmark District and designed by the architectural firm of Henry George Greene, AIA of Scarsdale, NY (project architect, David Wasserman). The 20,000-square foot building of five floors above ground and two below, will illustrate how energy-savings technology and environmentally sensitive construction methods can be economical. The heating and cooling system, including refrigeration requirements for the freezers and refrigerators in the commercial kitchen, will be provided by geothermal heat pumps using standing column wells. The facility is the first building on the island of Manhattan to feature geothermal heating and cooling. The mechanical system has been the assistance of Carl Orio`s firm of Water & Energy Systems corporation of Atkinson, New Hampshire. The two 1550-foot standing column wells were drilled by John Barnes of Flushing, NY.

Lund, J.W.

1997-08-01T23:59:59.000Z

223

Fluidized bed heat treating system  

DOE Patents (OSTI)

Systems for heat treating materials are presented. The systems typically involve a fluidized bed that contains granulated heat treating material. In some embodiments a fluid, such as an inert gas, is flowed through the granulated heat treating medium, which homogenizes the temperature of the heat treating medium. In some embodiments the fluid may be heated in a heating vessel and flowed into the process chamber where the fluid is then flowed through the granulated heat treating medium. In some embodiments the heat treating material may be liquid or granulated heat treating material and the heat treating material may be circulated through a heating vessel into a process chamber where the heat treating material contacts the material to be heat treated. Microwave energy may be used to provide the source of heat for heat treating systems.

Ripley, Edward B; Pfennigwerth, Glenn L

2014-05-06T23:59:59.000Z

224

Evaluation of Heat Stress and Strain in Electric Utility Workers  

E-Print Network (OSTI)

load variance. 9. Using HR rec set-points of 110 bpm and120 bpm both correlate well with increasing exposures. 10.rate set- points of 110 bpm and 120 bpm correlated well with

Brown, Eric Nicholas

2013-01-01T23:59:59.000Z

225

Flameless heat generator  

SciTech Connect

A heating device generates heat by working a liquid in a closed container with a rotating stack of finely perforate square plates and recovering the heat from the thus heated liquid. In one embodiment a stack of a multiplicity of flat square plates radially offset one from another is rotated in an oil bath in a container under an inner perforate non-rotating cover over which is a similar non-rotating cover that is imperforate. The thermal energy developed through the mechanical working of the liquid is transferred to the main liquid bath and is then removed, as for example, by circulating air or a liquid around the outside of the container with the thus heated air or liquid being used to heat a house or the like.

Leary, C. L.; Leary, G. C.

1983-12-13T23:59:59.000Z

226

NIF featured on BBC "Horizon"  

SciTech Connect

The National Ignition Facility, the world's largest laser system, located at Lawrence Livermore National Laboratory, was featured in the BBC broadcast "Horizon" hosted by physicist Brian Cox. Here is the NIF portion of the program, which was entitled "Can We Make A Star On Earth?" This video is used with the express permission of the BBC.

Brian Cox

2010-01-12T23:59:59.000Z

227

NIF featured on BBC "Horizon"  

ScienceCinema (OSTI)

The National Ignition Facility, the world's largest laser system, located at Lawrence Livermore National Laboratory, was featured in the BBC broadcast "Horizon" hosted by physicist Brian Cox. Here is the NIF portion of the program, which was entitled "Can We Make A Star On Earth?" This video is used with the express permission of the BBC.

Brian Cox

2010-09-01T23:59:59.000Z

228

Waste Heat Management Options: Industrial Process Heating Systems  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Heat Management Options Heat Management Options Industrial Process Heating Systems By Dr. Arvind C. Thekdi E-mail: athekdi@e3minc.com E3M, Inc. August 20, 2009 2 Source of Waste Heat in Industries * Steam Generation * Fluid Heating * Calcining * Drying * Heat Treating * Metal Heating * Metal and Non-metal Melting * Smelting, agglomeration etc. * Curing and Forming * Other Heating Waste heat is everywhere! Arvind Thekdi, E3M Inc Arvind Thekdi, E3M Inc 3 Waste Heat Sources from Process Heating Equipment * Hot gases - combustion products - Temperature from 300 deg. F. to 3000 deg.F. * Radiation-Convection heat loss - From temperature source of 500 deg. F. to 2500 deg. F. * Sensible-latent heat in heated product - From temperature 400 deg. F. to 2200 deg. F. * Cooling water or other liquids - Temperature from 100 deg. F. to 180 deg. F.

229

Mechanical Compression Heat Pumps  

E-Print Network (OSTI)

MECHANICAL COMPRESSION HEAT PUMPS Thomas-L. Apaloo and K. Kawamura Mycom Corporation, Los Angeles, California J. Matsuda, Mayekawa Mfg. Co., Tokyo, Japan ABSTRACT Mechanical compression heat pumping is not new in industrial applications.... In fact, industry history suggests that the theoretical concept was developed before 1825. Heat pump manufacturers gained the support of consultants and end-users when the energy crisis hit this country in 1973. That interest, today, has been...

Apaloo, T. L.; Kawamura, K.; Matsuda, J.

230

Sorption heat engines  

E-Print Network (OSTI)

For a simple free energy generating device - driven by thermal cycling and based on alternating adsorption and desorption - that has not been explicitly recognized as heat engine the name sorption heat engine is proposed. The mechanism is generally applicable to the fields of physics, chemistry, geology, and possibly, if relevant to the origin of life, biology. Four kinds of sorption heat engines are distinguished depending on the occurrence of changes in composition of the adsorbent or adsorbate during the thermal cycle.

Muller, A W J; Muller, Anthonie W. J.; Schulze-Makuch, Dirk

2005-01-01T23:59:59.000Z

231

Combined Heat and Power  

Office of Environmental Management (EM)

energy costs and 31 emissions while also providing more resilient and reliable electric power and thermal energy 1 . CHP 32 systems combine the production of heat (for both...

232

Waste Heat Recovery  

Office of Environmental Management (EM)

DRAFT - PRE-DECISIONAL - DRAFT 1 Waste Heat Recovery 1 Technology Assessment 2 Contents 3 1. Introduction to the TechnologySystem ......

233

Solar Heating in Uppsala.  

E-Print Network (OSTI)

?? The housing corporation Uppsalahem has installed asolar heating system in the neighbourhood Haubitsen,which was renovated in 2011. This report examineshow much energy the solar (more)

Blomqvist, Emelie; Hger, Klara

2012-01-01T23:59:59.000Z

234

HEATS: Thermal Energy Storage  

SciTech Connect

HEATS Project: The 15 projects that make up ARPA-Es HEATS program, short for High Energy Advanced Thermal Storage, seek to develop revolutionary, cost-effective ways to store thermal energy. HEATS focuses on 3 specific areas: 1) developing high-temperature solar thermal energy storage capable of cost-effectively delivering electricity around the clock and thermal energy storage for nuclear power plants capable of cost-effectively meeting peak demand, 2) creating synthetic fuel efficiently from sunlight by converting sunlight into heat, and 3) using thermal energy storage to improve the driving range of electric vehicles (EVs) and also enable thermal management of internal combustion engine vehicles.

None

2012-01-01T23:59:59.000Z

235

Solar heating in Colombia.  

E-Print Network (OSTI)

?? This report describes the process of a thesis implemented in Colombia concerning solar energy. The project was to install a self-circulating solar heating system, (more)

Skytt, Johanna

2012-01-01T23:59:59.000Z

236

Photovoltaic roof heat flux  

E-Print Network (OSTI)

Effect of building integrated photovoltaics on microclimateof a building's integrated-photovoltaics on heating a n dgaps for building- integrated photovoltaics, Solar Energy

Samady, Mezhgan Frishta

2011-01-01T23:59:59.000Z

237

Passive solar space heating  

SciTech Connect

An overview of passive solar space heating is presented indicating trends in design, new developments, performance measures, analytical design aids, and monitored building results.

Balcomb, J.D.

1980-01-01T23:59:59.000Z

238

Combined Heat & Power  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

available today." -American Council for an Energy-Efficient Economy What is Combined Heat & Power (CHP)? Federal Utility Partnership Working Group May 7 - 8, 2014 Virginia...

239

Heat rejection system  

DOE Patents (OSTI)

A cooling system for rejecting waste heat consists of a cooling tower incorporating a plurality of coolant tubes provided with cooling fins and each having a plurality of cooling channels therein, means for directing a heat exchange fluid from the power plant through less than the total number of cooling channels to cool the heat exchange fluid under normal ambient temperature conditions, means for directing water through the remaining cooling channels whenever the ambient temperature rises above the temperature at which dry cooling of the heat exchange fluid is sufficient and means for cooling the water.

Smith, Gregory C. (Richland, WA); Tokarz, Richard D. (Richland, WA); Parry, Jr., Harvey L. (Richland, WA); Braun, Daniel J. (Richland, WA)

1980-01-01T23:59:59.000Z

240

Heat transfer dynamics  

SciTech Connect

As heat transfer technology increases in complexity, it becomes more difficult for those without thermal dynamics engineering training to choose between competitive heat transfer systems offered to meet their drying requirements. A step back to the basics of heat transfer can help professional managers and papermakers make informed decisions on alternative equipment and methods. The primary forms of heat and mass transfer are reviewed with emphasis on the basics, so a practical understanding of each is gained. Finally, the principles and benefits of generating infrared energy by combusting a gaseous hydrocarbon fuel are explained.

Smith, T.M. (Marsden, Inc., Pennsauken, NJ (United States))

1994-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "recs features heating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

ARM - Atmospheric Heat Budget  

NLE Websites -- All DOE Office Websites (Extended Search)

ListAtmospheric Heat Budget Outreach Home Room News Publications Traditional Knowledge Kiosks Barrow, Alaska Tropical Western Pacific Site Tours Contacts Students Study Hall About...

242

HEAT RECOVERY FROM WASTE WATER BY MEANS OF A RECUPERATIVE HEAT EXCHANGER AND A HEAT PUMP  

Science Journals Connector (OSTI)

ABSTRACT The useful heat of warm waste water is generally transferred to cold water using a recuperative heat exchanger. Depending on its design, the heat exchanger is able to utilise up to 90% of the waste heat potential available. The electric energy needed to operate such a system is more than compensated for by an approximately 50-fold gain of useful heat. To increase substantially the waste heat potential available and the amount of heat recovered, the system for recuperative heat exchange can be complemented by a heat pump. Such a heat recovery system on the basis of waste water is being operated in a public indoor swimming pool. Here the recuperative heat exchanger accounts for about 60%, the heat pump for about 40% of the toal heat reclaimed. The system consumes only 1 kWh of electric energy to supply 8 kWh of useful heat. In this way the useful heat of 8 kWh is compensated for by the low consumption of primary energy of 2.8 kWh. Due to the installation of an automatic cleaning device, the heat transfer surfaces on the waste water side avoid deposits so that the troublesome maintenance work required in other cases on the heat exchangers is not required. KEYWORDS Shower drain water, recuperative heat recovery, heat recovery by means of a heat pump, combination of both types of heat recovery, automatic cleaning device for the heat exchangers, ratio of useful heat supply vs. electric energy consumption, economic consideration.

K. Biasin; F.D. Heidt

1988-01-01T23:59:59.000Z

243

Waste Heat Recovery from Industrial Process Heating Equipment -  

NLE Websites -- All DOE Office Websites (Extended Search)

Waste Heat Recovery from Industrial Process Heating Equipment - Waste Heat Recovery from Industrial Process Heating Equipment - Cross-cutting Research and Development Priorities Speaker(s): Sachin Nimbalkar Date: January 17, 2013 - 11:00am Location: 90-2063 Seminar Host/Point of Contact: Aimee McKane Waste heat is generated from several industrial systems used in manufacturing. The waste heat sources are distributed throughout a plant. The largest source for most industries is exhaust / flue gases or heated air from heating systems. This includes the high temperature gases from burners in process heating, lower temperature gases from heat treat, dryers, and heaters, heat from heat exchangers, cooling liquids and gases etc. The previous studies and direct contact with the industry as well as equipment suppliers have shown that a large amount of waste heat is not

244

Total Space Heating Water Heating Cook-  

Gasoline and Diesel Fuel Update (EIA)

Released: September, 2008 Released: September, 2008 Total Space Heating Water Heating Cook- ing Other Total Space Heating Water Heating Cook- ing Other All Buildings* ........................... 1,870 1,276 322 138 133 43.0 29.4 7.4 3.2 3.1 Building Floorspace (Square Feet) 1,001 to 5,000 ........................... 243 151 34 40 18 78.7 48.9 11.1 13.0 5.7 5,001 to 10,000 .......................... 202 139 31 29 Q 54.8 37.6 8.5 7.9 Q 10,001 to 25,000 ........................ 300 240 31 21 7 42.5 34.1 4.4 3.0 1.1 25,001 to 50,000 ........................ 250 182 40 11 Q 41.5 30.2 6.6 1.9 Q 50,001 to 100,000 ...................... 236 169 41 8 19 35.4 25.2 6.2 1.2 2.8 100,001 to 200,000 .................... 241 165 54 7 16 36.3 24.8 8.1 1.0 2.4 200,001 to 500,000 .................... 199 130 42 11 16 35.0 22.8 7.5 1.9 2.8 Over 500,000 ............................. 198

245

Total Space Heating Water Heating Cook-  

Gasoline and Diesel Fuel Update (EIA)

Released: September, 2008 Released: September, 2008 Total Space Heating Water Heating Cook- ing Other Total Space Heating Water Heating Cook- ing Other All Buildings ............................. 2,037 1,378 338 159 163 42.0 28.4 7.0 3.3 3.4 Building Floorspace (Square Feet) 1,001 to 5,000 ........................... 249 156 35 41 18 78.6 49.1 11.0 12.9 5.6 5,001 to 10,000 .......................... 218 147 32 31 7 54.8 37.1 8.1 7.9 1.7 10,001 to 25,000 ........................ 343 265 34 25 18 43.8 33.9 4.4 3.2 2.3 25,001 to 50,000 ........................ 270 196 41 13 Q 40.9 29.7 6.3 2.0 2.9 50,001 to 100,000 ...................... 269 186 45 13 24 35.8 24.8 6.0 1.8 3.2 100,001 to 200,000 .................... 267 182 56 10 19 35.4 24.1 7.4 1.3 2.6 200,001 to 500,000 .................... 204 134 43 11 17 34.7 22.7 7.3 1.8 2.9 Over 500,000 .............................

246

Steady response to heating: Gaussian heat source  

E-Print Network (OSTI)

+ prescribed latent heating => "Matsuno-Gill model" Moisture equation for precipitation term ¡ Can make. of Equatorial Waves Filter out "background spectrum": ¡ Can see all different wave types! Especially Kelvin #12;Equatorial Waves Alternative theory for wave speed: ¡ Higher vertical mode structure causes phase

Frierson, Dargan

247

Argonne Transportation - 2005 Features Archive  

NLE Websites -- All DOE Office Websites (Extended Search)

5 Features Archive 5 Features Archive South African Science Park Street Naming Michael Thackeray of Argonne National Laboratory's Chemical Engineering Division was recently honored as one of 11 notable South African scientists and innovators to have streets named after them in Pretoria's new Innovation Hub science park. (More...) Electrochemical Society Battery Division Research Award Michael Thackeray of Argonne National Laboratory received the 2005 Research Award of the Battery Division of the Electrochemical Society. The award was established in 1958 to recognize outstanding contributions to the science and technology of primary and secondary cells and batteries and fuel cells. (More...) SAE Barry D. McNutt Award for Excellence in Automotive Policy Analysis Steve Plotkin of Argonne's Center for Transportation Research was the winner of the Society for Automotive Engineers (SAE) 2005 Barry D. McNutt Award, which recognizes the importance of sound policy analysis and inspires members of the mobility community in government, industry and elsewhere to strive for excellence. (More...)

248

Argonne Transportation - 2003 Features Archive  

NLE Websites -- All DOE Office Websites (Extended Search)

3 Features Archive 3 Features Archive Society of Tribologists and Lubrication Engineers Fellow Ali Erdemir of Argonne's Energy Technology Division has been named a Fellow of the Society of Tribologists and Lubrication Engineers (STLE). Last year, Erdemir received the Al Sonntag Award and the Allan A. Manteuffel Award from STLE's Chicago chapter for his development of a carbon coating that showed the lowest coefficient of friction (less than .001) when tested in a dry nitrogen atmosphere. (More...) Argonne Researcher Honored for Career in Engine Research The American Society of Mechanical Engineers (ASME) honored Argonne's Ramanujam (Raj) Sekar by elevating his membership to the status of a Fellow, in recognition of his many "significant engineering achievements and contributions to the engineering profession" over a career spanning more than 33 years. Sekar manages the Engine and Emissions Research Group at Argonne's Transportation Technology R&D Center. (More...)

249

Argonne Transportation - 2008 Features Archive  

NLE Websites -- All DOE Office Websites (Extended Search)

8 Features Archive 8 Features Archive Battery Test Facility Since 1976, researchers have used Argonne's Electrochemical Analysis and Diagnostics Laboratory to study advanced battery systems for applications such as hybrid and plug-in hybrid electric vehicles and utility load-leveling during peak demand periods. The facility houses a computer-operated test laboratory, where individual cells and multicell modules of battery systems are subjected to performance and lifetime tests under simulated real-world conditions. (More...) EnerDel/Argonne Advanced High-Power Battery for Hybrid Electric Vehicles The EnerDel/Argonne lithium-ion battery is a highly reliable and extremely safe device that is lighter in weight, more compact, more powerful and longer-lasting than the nickel-metal hydride (Ni-MH) batteries in today's hybrid electric vehicles (HEVs). (More...)

250

PETSc: Features: Nvidia GPU support  

NLE Websites -- All DOE Office Websites (Extended Search)

Nvidia GPU support Nvidia GPU support Home Download Features Component Details Diagram GPUs Theads Documentation Applications/Publications Miscellaneous External Software Developers Site PETSc algebraic solvers now run on Nvidia GPU systems. This sometimes provides an alternative high-performance, low-cost solution technique. We recommend working with petsc-dev if you wish to work witht his feature. If you use the PETSc GPU code in your published work, please cite the following paper: @article{minden2010preliminary, title={Preliminary implementation of PETSc using GPUs}, author={Minden, V. and Smith, B.F. and Knepley, M.G.}, journal={Proceedings of the 2010 International Workshop of GPU Solutions to Multiscale Problems in Science and Engineering}, year={2010} } WARNING: Using GPUs effectively is difficult! You must be dedicated and

251

Argonne Transportation - 2000 Features Archive  

NLE Websites -- All DOE Office Websites (Extended Search)

0 Features Archive 0 Features Archive Argonne Technology Wins R&D 100 Award Argonne researchers have won an R&D 100 Award for developing a catalyst that may help bring environmentally friendly electric cars to the marketplace. These awards are given annually by R&D Magazine to the 100 most significant technical products of the year. (More...) Argonne's Automotive Recycling Processes Win Awards The automobile shredder industry recovers over 10 million tons of ferrous (iron-containing) scrap annually from obsolete automobiles and sells the metals at a significant profit. After metals recovery, though, the auto recyclers are left with about 5 million tons of nonmetallic auto shredder residue (ASR) to dispose of annually. Argonne's processes to recover valuable plastics from this scrap have won two prestigious awards. (More...)

252

Proceedings of Heat Transfer 2003: ASME Summer Heat Transfer Conference  

E-Print Network (OSTI)

Proceedings of Heat Transfer 2003: ASME Summer Heat Transfer Conference Las Vegas, Nevada, USA July 21-23, 2003 HT2003-47449 HEAT TRANSFER FROM A MOVING AND EVAPORATING MENISCUS ON A HEATED SURFACE meniscus with complete evaporation of water without any meniscus break-up. The experimental heat transfer

Kandlikar, Satish

253

Chemical heat pump  

DOE Patents (OSTI)

A chemical heat pump system is disclosed for use in heating and cooling structures such as residences or commercial buildings. The system is particularly adapted to utilizing solar energy, but also increases the efficiency of other forms of thermal energy when solar energy is not available. When solar energy is not available for relatively short periods of time, the heat storage capacity of the chemical heat pump is utilized to heat the structure, as during nighttime hours. The design also permits home heating from solar energy when the sun is shining. The entire system may be conveniently rooftop located. In order to faciliate installation on existing structures, the absorber and vaporizer portions of the system may each be designed as flat, thin wall, thin pan vessels which materially increase the surface area available for heat transfer. In addition, this thin, flat configuration of the absorber and its thin walled (and therefore relatively flexible) construction permits substantial expansion and contraction of the absorber material during vaporization and absorption without generating voids which would interfere with heat transfer.

Greiner, Leonard (2853-A Hickory Pl., Costa Mesa, CA 92626)

1984-01-01T23:59:59.000Z

254

Chemical heat pump  

DOE Patents (OSTI)

A chemical heat pump system is disclosed for use in heating and cooling structures such as residences or commercial buildings. The system is particularly adapted to utilizing solar energy, but also increases the efficiency of other forms of thermal energy when solar energy is not available. When solar energy is not available for relatively short periods of time, the heat storage capacity of the chemical heat pump is utilized to heat the structure, as during nighttime hours. The design also permits home heating from solar energy when the sun is shining. The entire system may be conveniently rooftop located. In order to facilitate installation on existing structures, the absorber and vaporizer portions of the system may each be designed as flat, thin wall, thin pan vessels which materially increase the surface area available for heat transfer. In addition, this thin, flat configuration of the absorber and its thin walled (and therefore relatively flexible) construction permits substantial expansion and contraction of the absorber material during vaporization and absorption without generating voids which would interfere with heat transfer.

Greiner, Leonard (2853-A Hickory Pl., Costa Mesa, CA 92626)

1984-01-01T23:59:59.000Z

255

Chemical heat pump  

DOE Patents (OSTI)

A chemical heat pump system is disclosed for use in heating and cooling structures such as residences or commercial buildings. The system is particularly adapted to utilizing solar energy, but also increases the efficiency of other forms of thermal energy when solar energy is not available. When solar energy is not available for relatively short periods of time, the heat storage capacity of the chemical heat pump is utilized to heat the structure, as during nighttime hours. The design also permits home heating from solar energy when the sun is shining. The entire system may be conveniently rooftop located. In order to facilitate intallation on existing structures, the absorber and vaporizer portions of the system may each be designed as flat, thin wall, thin pan vessels which materially increase the surface area available for heat transfer. In addition, this thin, flat configuration of the absorber and its thin walled (and therefore relatively flexible) construction permits substantial expansion and contraction of the absorber material during vaporization and absorption without generating voids which would interfere with heat transfer.

Greiner, Leonard (2853-A Hickory Pl., Costa Mesa, CA 92626)

1984-01-01T23:59:59.000Z

256

Chemical heat pump  

DOE Patents (OSTI)

A chemical heat pump system is disclosed for use in heating and cooling structures such as residences or commercial buildings. The system is particularly adapted to utilizing solar energy, but also increases the efficiency of other forms of thermal energy when solar energy is not available. When solar energy is not available for relatively short periods of time, the heat storage capacity of the chemical heat pump is utilized to heat the structure, as during nighttime hours. The design also permits home heating from solar energy when the sun is shining. The entire system may be conveniently rooftop located. In order to facilitate installation on existing structures, the absorber and vaporizer portions of the system may each be designed as flat, thin wall, thin pan vessels which materially increase the surface area available for heat transfer. In addition, this thin, flat configuration of the absorber and its thin walled (and therefore relatively flexible) construction permits substantial expansion and contraction of the absorber material during vaporization and absorption without generating voids which would interfere with heat transfer.

Greiner, Leonard (2853-A Hickory Pl., Costa Mesa, CA 92626)

1981-01-01T23:59:59.000Z

257

Microchannel heat sink assembly  

DOE Patents (OSTI)

The present invention provides a microchannel heat sink with a thermal range from cryogenic temperatures to several hundred degrees centigrade. The heat sink can be used with a variety of fluids, such as cryogenic or corrosive fluids, and can be operated at a high pressure. The heat sink comprises a microchannel layer preferably formed of silicon, and a manifold layer preferably formed of glass. The manifold layer comprises an inlet groove and outlet groove which define an inlet manifold and an outlet manifold. The inlet manifold delivers coolant to the inlet section of the microchannels, and the outlet manifold receives coolant from the outlet section of the microchannels. In one embodiment, the manifold layer comprises an inlet hole extending through the manifold layer to the inlet manifold, and an outlet hole extending through the manifold layer to the outlet manifold. Coolant is supplied to the heat sink through a conduit assembly connected to the heat sink. A resilient seal, such as a gasket or an O-ring, is disposed between the conduit and the hole in the heat sink in order to provide a watertight seal. In other embodiments, the conduit assembly may comprise a metal tube which is connected to the heat sink by a soft solder. In still other embodiments, the heat sink may comprise inlet and outlet nipples. The present invention has application in supercomputers, integrated circuits and other electronic devices, and is suitable for cooling materials to superconducting temperatures. 13 figs.

Bonde, W.L.; Contolini, R.J.

1992-03-24T23:59:59.000Z

258

Heat Requirements of Buildings  

Science Journals Connector (OSTI)

... and Ventilating Engineers in a publication entitled Recommendations for the Computation of Heat Requirements for Buildings (Pp. iii+41. Is. 9d.) This comprises a section of the ... parts. That on temperature-rise and rates of change gives the recommended values applicable to buildings ranging alphabetically from aircraft sheds to warehouses. The design of heating and ventilating installations ...

1942-02-28T23:59:59.000Z

259

Solar heating system  

DOE Patents (OSTI)

An improved solar heating system in which the incident radiation of the sun is absorbed on collector panels, transferred to a storage unit and then distributed as heat for a building and the like. The improvement is obtained by utilizing a storage unit comprising separate compartments containing an array of materials having different melting points ranging from 75.degree. to 180.degree. F. The materials in the storage system are melted in accordance with the amount of heat absorbed from the sun and then transferred to the storage system. An efficient low volume storage system is provided by utilizing the latent heat of fusion of the materials as they change states in storing and releasing heat for distribution.

Schreyer, James M. (Oak Ridge, TN); Dorsey, George F. (Concord, TN)

1982-01-01T23:59:59.000Z

260

Radiant Heating | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Radiant Heating Radiant Heating Radiant Heating June 24, 2012 - 5:52pm Addthis In-wall radiant heating in a house under construction near Denver. | Photo courtesy of Warren Gretz, NREL. In-wall radiant heating in a house under construction near Denver. | Photo courtesy of Warren Gretz, NREL. Radiant heating systems supply heat directly to the floor or to panels in the wall or ceiling of a house. The systems depend largely on radiant heat transfer -- the delivery of heat directly from the hot surface to the people and objects in the room via infrared radiation. Radiant heating is the effect you feel when you can feel the warmth of a hot stovetop element from across the room. When radiant heating is located in the floor, it is often called radiant floor heating or simply floor heating.

Note: This page contains sample records for the topic "recs features heating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Radiant Heating | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Radiant Heating Radiant Heating Radiant Heating June 24, 2012 - 5:52pm Addthis In-wall radiant heating in a house under construction near Denver. | Photo courtesy of Warren Gretz, NREL. In-wall radiant heating in a house under construction near Denver. | Photo courtesy of Warren Gretz, NREL. Radiant heating systems supply heat directly to the floor or to panels in the wall or ceiling of a house. The systems depend largely on radiant heat transfer -- the delivery of heat directly from the hot surface to the people and objects in the room via infrared radiation. Radiant heating is the effect you feel when you can feel the warmth of a hot stovetop element from across the room. When radiant heating is located in the floor, it is often called radiant floor heating or simply floor heating.

262

Heat-Of-Reaction Chemical Heat Pumps--Possible Configurations  

E-Print Network (OSTI)

-807. (5) K. Kesavan. The Use of Dissociating Gases As the Working Fluid in Thermodynamic Power Conversion Cycles, Ph.D. thesis. Carnegie-Mellon University, 1978, Ann Arbor, MI: University Microfilms International, 1978. 5. Heat amplifier with a gas...ABSTRACT Chemical heat pumps utilize working fluids which undergo reversible chemical changes. Mechanically driven reactive heat pump cycles or, alternatively, hl~a: driven heat pumps in which either heat engine or heat pump working fluid...

Kirol, L. D.

263

Chemical heat pump cools as well as heats  

Science Journals Connector (OSTI)

Chemical heat pump cools as well as heats ... Innovative heat pump uses methanol refrigerant, calcium chloride absorber to use and store solar energy for heating, air conditioning, hot water ... Though the EIC heat pump is similar in concept to other chemical heat pumps now being used or developed, it does offer a number of innovations, not the least of which are its novel refrigerant (methanol) and absorption medium (calcium chloride). ...

RON DAGANI

1980-10-20T23:59:59.000Z

264

Integrating preconcentrator heat controller  

DOE Patents (OSTI)

A method and apparatus for controlling the electric resistance heating of a metallic chemical preconcentrator screen, for example, used in portable trace explosives detectors. The length of the heating time-period is automatically adjusted to compensate for any changes in the voltage driving the heating current across the screen, for example, due to gradual discharge or aging of a battery. The total deposited energy in the screen is proportional to the integral over time of the square of the voltage drop across the screen. Since the net temperature rise, .DELTA.T.sub.s, of the screen, from beginning to end of the heating pulse, is proportional to the total amount of heat energy deposited in the screen during the heating pulse, then this integral can be calculated in real-time and used to terminate the heating current when a pre-set target value has been reached; thereby providing a consistent and reliable screen temperature rise, .DELTA.T.sub.s, from pulse-to-pulse.

Bouchier, Francis A. (Albuquerque, NM); Arakaki, Lester H. (Edgewood, NM); Varley, Eric S. (Albuquerque, NM)

2007-10-16T23:59:59.000Z

265

City of Klamath Falls District Heating District Heating Low Temperatur...  

Open Energy Info (EERE)

Geothermal Facility Jump to: navigation, search Name City of Klamath Falls District Heating District Heating Low Temperature Geothermal Facility Facility City of Klamath...

266

PIA - Northeast Home Heating Oil Reserve System (Heating Oil...  

Office of Environmental Management (EM)

Home Heating Oil Reserve System (Heating Oil) More Documents & Publications PIA - WEB Physical Security Major Application PIA - GovTrip (DOE data) PIA - WEB Unclassified...

267

Heat treatment furnace  

DOE Patents (OSTI)

A furnace heats through both infrared radiation and convective air utilizing an infrared/purge gas design that enables improved temperature control to enable more uniform treatment of workpieces. The furnace utilizes lamps, the electrical end connections of which are located in an enclosure outside the furnace chamber, with the lamps extending into the furnace chamber through openings in the wall of the chamber. The enclosure is purged with gas, which gas flows from the enclosure into the furnace chamber via the openings in the wall of the chamber so that the gas flows above and around the lamps and is heated to form a convective mechanism in heating parts.

Seals, Roland D; Parrott, Jeffrey G; DeMint, Paul D; Finney, Kevin R; Blue, Charles T

2014-10-21T23:59:59.000Z

268

Molecular heat pump  

E-Print Network (OSTI)

We propose a novel molecular device that pumps heat against a thermal gradient. The system consists of a molecular element connecting two thermal reservoirs that are characterized by different spectral properties. The pumping action is achieved by applying an external force that periodically modulates molecular levels. This modulation affects periodic oscillations of the internal temperature of the molecule and the strength of its coupling to each reservoir resulting in a net heat flow in the desired direction. The heat flow is examined in the slow and fast modulation limits and for different modulation waveforms, thus making it possible to optimize the device performance.

Dvira Segal; Abraham Nitzan

2005-10-11T23:59:59.000Z

269

Heat storage with CREDA  

SciTech Connect

The principle of operation of ETS or Electric Thermal Storage is discussed in this book. As can be seen by the diagram presented, heating elements buried deep within the core are energized during off-peak periods or periods of lower cost energy. These elements charge the core to a per-determined level, then during the on-peak periods when the cost of electricity is higher or demand is higher, the heat is extracted from the core. The author discusses how this technology has progressed to the ETS equipment of today; this being the finer control of charging rates and extraction of heat from the core.

Beal, T. (Fostoria Industries, Fostoria, OH (US))

1987-01-01T23:59:59.000Z

270

Heat pumps and under floor heating as a heating system for Finnish low-rise residential buildings.  

E-Print Network (OSTI)

??In bachelors thesis the study of under floor heating system with ground source heat pump for the heat transfers fluid heating is considered. The case (more)

Chuduk, Svetlana

2010-01-01T23:59:59.000Z

271

Domestic Heating and Thermal Insulation  

Science Journals Connector (OSTI)

... DIGEST 133 of the Building Research Station, entitled "Domestic Heating and Thermal Insulation" (Pp. 7. London : H.M. Stationery Office, 1960. 4insulation, the standard of heating, the ventilation-rate and the length of the heating season ...

1960-09-17T23:59:59.000Z

272

2659 heat insulation [n] (2)  

Science Journals Connector (OSTI)

constr....(Protection against heat provided by heat-shielding materials in the outer walls of a building to prevent heat build-up in hot regions or in temperate climates during the summer. In tempera...

2010-01-01T23:59:59.000Z

273

Heat Transfer and Convection Currents  

Science Journals Connector (OSTI)

...October 1965 research-article Heat Transfer and Convection Currents D. C...convection in a medium with internal heat generation is discussed semi-quantitatively...States English United Kingdom 1966 Heat transfer and convection currents Tozer D...

1965-01-01T23:59:59.000Z

274

Heat and Sound Insulation Materials  

Science Journals Connector (OSTI)

Of the three heat transfer processes: heat conduction, convection and radiation, convectional heat transfer is reduced by fiber and foam insulation materials1, 2). Air circulation is prevented by compartmentalizi...

Dr. Andre Knop; Dr. Louis A. Pilato

1985-01-01T23:59:59.000Z

275

Residential heating oil prices decline  

U.S. Energy Information Administration (EIA) Indexed Site

heating oil prices decline The average retail price for home heating oil is 3.48 per gallon. That's down 4.5 cents from a week ago, based on the residential heating fuel survey by...

276

Argonne Transportation - 2001 Features Archive  

NLE Websites -- All DOE Office Websites (Extended Search)

1 Features Archive 1 Features Archive SAE Award for Excellence in Oral Presentation Christopher Powell of Argonne National Laboratory's Center for Transportation Research (CTR) received a Society of Automotive Engineers (SAE) Award for Excellence in Oral Presentation for his presentation entitled "X-Ray Measurement of High Pressure Diesel Sprays" at the March 2001 SAE World Congress in Detroit, Michigan. (More...) Discover Award Finalist, Transportation: Using “X-Ray Vision” to Study Fuel Spray Processes Inside Engines By using high-brilliance X-rays from Argonne’s Advanced Photon Source, researchers are able to obtain never-before-possible, time-resolved and quantitative information on the structure of gasoline and diesel fuel sprays at the very moment they enter the engine cylinder. Before the new “X-ray vision” technique, the portion of fuel sprays nearest the injector nozzle (the first one inch) had been too opaque for visible light to penetrate, leaving engine designers and manufacturers to guess at conditions inside the fuel spray

277

A Small Scale Solar Agricultural Dryer with Biomass Burner and Heat Storage Back-Up Heater  

Science Journals Connector (OSTI)

This paper describes a small scale solar agricultural dryer with a simple biomass burner and heat storage back-up heater. The key design features ... are the combination of direct and indirect type solar dryer, t...

Elieser Tarigan; Perapong Tekasakul

2009-01-01T23:59:59.000Z

278

Advances in induction heating  

SciTech Connect

Electric induction heating, in situ, can distill (underground) high-heat-value (HHV) gas, coal tar, bitumen, and shale oil. This technique permits potentially lower cost exploitation of the solid fossil fuels: coal, oil shale, tar sand, and heavy oil. The products, when brought to the surface in gaseous form and processed, yield chemical feedstocks, natural gas, and petroleum. Residual coke can be converted, in situ, to low-heat-value (LHV) gas by a conventional water-gas process. LHV can be burned at the surface to generate electricity at low cost. The major cost of the installation will have been paid for by the HHV gas and tar distilled from the coal. There are 2 mechanisms of heating by electric induction. One uses displacement currents induced from an electric field. The other uses eddy currents induced by a magnetic field.

Not Available

1980-06-16T23:59:59.000Z

279

Solar Heating Contractor Licensing  

Energy.gov (U.S. Department of Energy (DOE))

Michigan offers a solar heating contractor specialty license to individuals who have at least three years of experience installing solar equipment under the direction of a licensed solar contractor...

280

Heating and cooling system  

SciTech Connect

Heating and cooling of dwelling houses and other confined spaces is facilitated by a system in which thermal energy is transported between an air heating and cooling system in the dwelling and a water heat storage sink or source, preferably in the form of a swimming pool or swimming pool and spa combination. Special reversing valve circuitry and the use of solar collectors and liquid-to-liquid heat exchangers on the liquid side of the system , and special air valves and air modules on the air side of the system, enhance the system's efficiency and make it practical in the sense that systems employing the invention can utilize existing craft skills and building financing arrangements and building codes, and the like, without major modification.

Krumhansl, M.U.

1982-10-12T23:59:59.000Z

Note: This page contains sample records for the topic "recs features heating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Solar heated swimming pool  

SciTech Connect

A swimming pool construction incorporating solar heating means to heat the pool water to a desired level. The pool includes a surrounding safety fence supported by a plurality of fence supports which are hollow and which include internal passageways. The pool water is passed through the pool support passageways whereupon it absorbs heat from the sidewalls of the fence supports, the surfaces of which have been heated by solar radiation. The fence supports can be made of plastic or other materials, but preferably are dark for improved absorptivity. The pool water can be passed serially through each of the fence supports and suitable thermostat control means can be provided to limit the water temperature increase.

Pettit, F.M.

1984-10-02T23:59:59.000Z

282

Electron Heat Transport Measured  

NLE Websites -- All DOE Office Websites (Extended Search)

Heat Transport Measured in a Stochastic Magnetic Field T. M. Biewer, * C. B. Forest, J. K. Anderson, G. Fiksel, B. Hudson, S. C. Prager, J. S. Sarff, and J. C. Wright...

283

Wood Heating Fuel Exemption  

Energy.gov (U.S. Department of Energy (DOE))

This statute exempts from the state sales tax all wood or "refuse-derived" fuel used for heating purposes. The law does not make any distinctions about whether the qualified fuels are used for...

284

Absorption Heat Pump Developments  

Science Journals Connector (OSTI)

The implementation of both new thermodynamic cycles and new suitable fluids makes it possible to considerably widen the capacity to recover and upgrade low level heat contained particularly in industrial therm...

G. Cohen; A. Rojey

1983-01-01T23:59:59.000Z

285

Curling in the heat  

Science Journals Connector (OSTI)

... heat sensor, shown here, has been developed by Jim Gimzewski and colleagues at IBM Riis-chlikon specifically for studies of surface reactions . A spin-off of the scanning probe ...

David A. King

1994-04-21T23:59:59.000Z

286

Water Heating | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

to cut your water heating bill. Estimating Costs and Efficiency of Storage, Demand, and Heat Pump Water Heaters A water heater's energy efficiency is determined by the energy...

287

Unique features of space reactors  

SciTech Connect

Space reactors are designed to meet a unique set of requirements; they must be sufficiently compact to be launched in a rocket to their operational location, operate for many years without maintenance and servicing, operate in extreme environments, and reject heat by radiation to space. To meet these restrictions, operating temperatures are much greater than in terrestrial power plants, and the reactors tend to have a fast neutron spectrum. Currently, a new generation of space reactor power plants is being developed. The major effort is in the SP-100 program, where the power plant is being designed for seven years of full power, and no maintenance operation at a reactor outlet operating temperature of 1350 K. 8 refs., 3 figs., 1 tab.

Buden, D.

1990-01-01T23:59:59.000Z

288

Heat flux limiting sleeves  

DOE Patents (OSTI)

A heat limiting tubular sleeve extending over only a portion of a tube having a generally uniform outside diameter, the sleeve being open on both ends, having one end thereof larger in diameter than the other end thereof and having a wall thickness which decreases in the same direction as the diameter of the sleeve decreases so that the heat transfer through the sleeve and tube is less adjacent the large diameter end of the sleeve than adjacent the other end thereof.

Harris, William G. (Tampa, FL)

1985-01-01T23:59:59.000Z

289

Heat Waves, Global Warming, and Mitigation  

E-Print Network (OSTI)

Heat Waves, Global Warming, and Mitigation Ann E. Carlson*II. HEAT WAVE DEFINITIONS .. A . HCHANGE AND HEAT WAVES .. CLIMATE III. IV. HEAT

Carlson, Ann E.

2008-01-01T23:59:59.000Z

290

Alternative Fuels Data Center: News and Features  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

About About Printable Version Share this resource Send a link to Alternative Fuels Data Center: News and Features to someone by E-mail Share Alternative Fuels Data Center: News and Features on Facebook Tweet about Alternative Fuels Data Center: News and Features on Twitter Bookmark Alternative Fuels Data Center: News and Features on Google Bookmark Alternative Fuels Data Center: News and Features on Delicious Rank Alternative Fuels Data Center: News and Features on Digg Find More places to share Alternative Fuels Data Center: News and Features on AddThis.com... More in this section... Project Assistance News & Features Spanish Resources Contacts News and Features The Alternative Fuels Data Center (AFDC) helps transportation decision makers find alternative fuel information, data, and tools through

291

Convective heat flow probe  

DOE Patents (OSTI)

A convective heat flow probe device is provided which measures heat flow and fluid flow magnitude in the formation surrounding a borehole. The probe comprises an elongate housing adapted to be lowered down into the borehole; a plurality of heaters extending along the probe for heating the formation surrounding the borehole; a plurality of temperature sensors arranged around the periphery of the probe for measuring the temperature of the surrounding formation after heating thereof by the heater elements. The temperature sensors and heater elements are mounted in a plurality of separate heater pads which are supported by the housing and which are adapted to be radially expanded into firm engagement with the walls of the borehole. The heat supplied by the heater elements and the temperatures measured by the temperature sensors are monitored and used in providing the desired measurements. The outer peripheral surfaces of the heater pads are configured as segments of a cylinder and form a full cylinder when taken together. A plurality of temperature sensors are located on each pad so as to extend along the length and across the width thereof, with a heating element being located in each pad beneath the temperature sensors. An expansion mechanism driven by a clamping motor provides expansion and retraction of the heater pads and expandable packet-type seals are provided along the probe above and below the heater pads.

Dunn, J.C.; Hardee, H.C.; Striker, R.P.

1984-01-09T23:59:59.000Z

292

Intrinsically irreversible heat engine  

DOE Patents (OSTI)

A class of heat engines based on an intrinsically irreversible heat transfer process is disclosed. In a typical embodiment the engine comprises a compressible fluid that is cyclically compressed and expanded while at the same time being driven in reciprocal motion by a positive displacement drive means. A second thermodynamic medium is maintained in imperfect thermal contact with the fluid and bears a broken thermodynamic symmetry with respect to the fluid. The second thermodynamic medium is a structure adapted to have a low fluid flow impedance with respect to the compressible fluid, and which is further adapted to be in only moderate thermal contact with the fluid. In operation, thermal energy is pumped along the second medium due to a phase lag between the cyclical heating and cooling of the fluid and the resulting heat conduction between the fluid and the medium. In a preferred embodiment the engine comprises an acoustical drive and a housing containing a gas which is driven at a resonant frequency so as to be maintained in a standing wave. Operation of the engine at acoustic frequencies improves the power density and coefficient of performance. The second thermodynamic medium can be coupled to suitable heat exchangers to utilize the engine as a simple refrigeration device having no mechanical moving parts. Alternatively, the engine is reversible in function so as to be utilizable as a prime mover by coupling it to suitable sources and sinks of heat.

Wheatley, J.C.; Swift, G.W.; Migliori, A.

1984-01-01T23:59:59.000Z

293

Modern Geothermal Features | Open Energy Information  

Open Energy Info (EERE)

Modern Geothermal Features Modern Geothermal Features Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Print PDF Modern Geothermal Features Dictionary.png Modern Geothermal Features: Active geothermal manifestations such as hot springs, fumaroles, steaming ground, mud pots, mud pools, mud volcanoes, or geysers. Other definitions:Wikipedia Reegle When geothermal systems have conduits available to the surface, they cause surface manifestations (or geothermal features). These features may vary between steam seeps (fumaroles) or pure fluid manifestations (geysers and hot springs) causing spectacular mineral formations (e.g. sinter terraces, tufa mounds). These types of manifestations are clear indications of an underlying geothermal system. Geothermal systems with no modern surface

294

FEMP--Geothermal Heat Pumps  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

heat pump-like an air conditioner or refrigera- heat pump-like an air conditioner or refrigera- tor-moves heat from one place to another. In the summer, a geothermal heat pump (GHP) operating in a cooling mode lowers indoor temperatures by transferring heat from inside a building to the ground outside or below it. Unlike an air condition- er, though, a heat pump's process can be reversed. In the winter, a GHP extracts heat from the ground and transfers it inside. Also, the GHP can use waste heat from summer air-conditioning to provide virtually free hot-water heating. The energy value of the heat moved is typically more than three times the electricity used in the transfer process. GHPs are efficient and require no backup heat because the earth stays at a relatively moderate temperature throughout the year.

295

Solar air heating system for combined DHW and space heating  

E-Print Network (OSTI)

Solar air heating system for combined DHW and space heating solar air collector PV-panel fannon-return valve DHW tank mantle cold waterhot water roof Solar Energy Centre Denmark Danish Technological Institute SEC-R-29 #12;Solar air heating system for combined DHW and space heating Søren ?stergaard Jensen

296

PreHeat: Controlling Home Heating Using Occupancy Prediction  

E-Print Network (OSTI)

@comp.lancs.ac.uk ABSTRACT Home heating is a major factor in worldwide energy use. Our system, PreHeat, aims to more, and measuring actual gas consumption and occupancy. In UK homes PreHeat both saved gas and reduced MissTime (the Home heating uses more energy than any other residential energy expenditure including air conditioning

Krumm, John

297

Regional variations of heat flow differences with depth in Alberta, Canada  

Science Journals Connector (OSTI)

......occupies the vast area between the Rocky Mountain Foothills in the SW...increases toward the west from the flat plains area to the foothills and the Rocky Mountains beyond. 3 Heat flow...features, and so the heat flow in ROCKY ' MOUNTAINS INTERIOR PLAINS......

J. A. Majorowicz; F. W. Jones; H.-L. Lam; A. M. Jessop

1985-05-01T23:59:59.000Z

298

@ work' video segment features Robotic Software Engineer  

SciTech Connect

@ work highlights Idaho National Laboratory employees and the jobs they perform.This segment features Robotic Software Engineer Miles Walton.

Idaho National Laboratory

2008-03-27T23:59:59.000Z

299

@ work' video segment features Robotic Software Engineer  

ScienceCinema (OSTI)

@ work highlights Idaho National Laboratory employees and the jobs they perform.This segment features Robotic Software Engineer Miles Walton.

Idaho National Laboratory

2010-01-08T23:59:59.000Z

300

Heat exchanger-accumulator  

DOE Patents (OSTI)

What is disclosed is a heat exchanger-accumulator for vaporizing a refrigerant or the like, characterized by an upright pressure vessel having a top, bottom and side walls; an inlet conduit eccentrically and sealingly penetrating through the top; a tubular overflow chamber disposed within the vessel and sealingly connected with the bottom so as to define an annular outer volumetric chamber for receiving refrigerant; a heat transfer coil disposed in the outer volumetric chamber for vaporizing the liquid refrigerant that accumulates there; the heat transfer coil defining a passageway for circulating an externally supplied heat exchange fluid; transferring heat efficiently from the fluid; and freely allowing vaporized refrigerant to escape upwardly from the liquid refrigerant; and a refrigerant discharge conduit penetrating sealingly through the top and traversing substantially the length of the pressurized vessel downwardly and upwardly such that its inlet is near the top of the pressurized vessel so as to provide a means for transporting refrigerant vapor from the vessel. The refrigerant discharge conduit has metering orifices, or passageways, penetrating laterally through its walls near the bottom, communicating respectively interiorly and exteriorly of the overflow chamber for controllably carrying small amounts of liquid refrigerant and oil to the effluent stream of refrigerant gas.

Ecker, Amir L. (Dallas, TX)

1980-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "recs features heating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Discriminant Absorption Feature Learning for Material Classification  

E-Print Network (OSTI)

1 Discriminant Absorption Feature Learning for Material Classification Zhouyu Fu, Antonio Robles in spectral imaging by combining the use of invariant spectral absorption features and statistical machine learning techniques. Our method hinges in the relevance of spectral absorption features for material

Robles-Kelly, Antonio

302

Definition: Heat | Open Energy Information  

Open Energy Info (EERE)

Heat Heat Jump to: navigation, search Dictionary.png Heat Heat is the form of energy that is transferred between systems or objects with different temperatures (flowing from the high-temperature system to the low-temperature system). Also referred to as heat energy or thermal energy. Heat is typically measured in Btu, calories or joules. Heat flow, or the rate at which heat is transferred between systems, has the same units as power: energy per unit time (J/s).[1][2][3][4] View on Wikipedia Wikipedia Definition In physics and chemistry, heat is energy in transfer between a system and its surroundings other than by work or transfer of matter. The transfer can occur in two simple ways, conduction, and radiation, and in a more complicated way called convective circulation. Heat is not a property

303

Heat and Power Systems Design  

E-Print Network (OSTI)

HEAT AND POWER SYSTEMS DESIGN H. D. Spriggs and J. V. Shah, Leesburg. VA ABSTRACT The selection of heat and power systems usually does not include a thorough analysis of the process heating. cooling and power requirements. In most cases..., these process requirements are accepted as specifications before heat and power systems are selected and designed. In t~is article we describe how Process Integration using Pinch Technology can be used to understand and achieve the minimum process heating...

Spriggs, H. D.; Shah, J. V.

304

Feature Tracking Using Reeb Graphs  

SciTech Connect

Tracking features and exploring their temporal dynamics can aid scientists in identifying interesting time intervals in a simulation and serve as basis for performing quantitative analyses of temporal phenomena. In this paper, we develop a novel approach for tracking subsets of isosurfaces, such as burning regions in simulated flames, which are defined as areas of high fuel consumption on a temperature isosurface. Tracking such regions as they merge and split over time can provide important insights into the impact of turbulence on the combustion process. However, the convoluted nature of the temperature isosurface and its rapid movement make this analysis particularly challenging. Our approach tracks burning regions by extracting a temperature isovolume from the four-dimensional space-time temperature field. It then obtains isosurfaces for the original simulation time steps and labels individual connected 'burning' regions based on the local fuel consumption value. Based on this information, a boundary surface between burning and non-burning regions is constructed. The Reeb graph of this boundary surface is the tracking graph for burning regions.

Weber, Gunther H.; Bremer, Peer-Timo; Day, Marcus S.; Bell, John B.; Pascucci, Valerio

2010-08-02T23:59:59.000Z

305

Acoustical heat pumping engine  

DOE Patents (OSTI)

The disclosure is directed to an acoustical heat pumping engine without moving seals. A tubular housing holds a compressible fluid capable of supporting an acoustical standing wave. An acoustical driver is disposed at one end of the housing and the other end is capped. A second thermodynamic medium is disposed in the housing near to but spaced from the capped end. Heat is pumped along the second thermodynamic medium toward the capped end as a consequence both of the pressure oscillation due to the driver and imperfect thermal contact between the fluid and the second thermodynamic medium. 2 figs.

Wheatley, J.C.; Swift, G.W.; Migliori, A.

1983-08-16T23:59:59.000Z

306

Optical heat flux gauge  

DOE Patents (OSTI)

A heat flux gauge comprising first and second thermographic phosphor layers separated by a layer of a thermal insulator. The gauge may be mounted on a surface with the first thermographic phosphor in contact with the surface. A light source is directed at the gauge, causing the phosphors to luminesce. The luminescence produced by the phosphors is collected and its spectra analyzed in order to determine the heat flux on the surface. First and second phosphor layers must be different materials to assure that the spectral lines collected will be distinguishable.

Noel, Bruce W. (Espanola, NM); Borella, Henry M. (Santa Barbara, CA); Cates, Michael R. (Oak Ridge, TN); Turley, W. Dale (Santa Barbara, CA); MaCarthur, Charles D. (Clayton, OH); Cala, Gregory C. (Dayton, OH)

1991-01-01T23:59:59.000Z

307

Optical heat flux gauge  

DOE Patents (OSTI)

A heat flux gauge comprising first and second thermographic phosphor layers separated by a layer of a thermal insulator wherein each thermographic layer comprises a plurality of respective thermographic phosphors. The gauge may be mounted on a surface with the first thermographic phosphor in contact with the surface. A light source is directed at the gauge, causing the phosphors to luminesce. The luminescence produced by the phosphors is collected and its spectra analyzed in order to determine the heat flux on the surface. First and second phosphor layers must be different materials to assure that the spectral lines collected will be distinguishable.

Noel, Bruce W. (Espanola, NM); Borella, Henry M. (Santa Barbara, CA); Cates, Michael R. (Oak Ridge, TN); Turley, W. Dale (Santa Barbara, CA); MacArthur, Charles D. (Clayton, OH); Cala, Gregory C. (Dayton, OH)

1991-01-01T23:59:59.000Z

308

Optical heat flux gauge  

DOE Patents (OSTI)

A heat flux gauge comprising first and second thermographic phosphor layers separated by a layer of a thermal insulator, wherein each thermographic layer comprises a plurality of respective thermographic sensors in a juxtaposed relationship with respect to each other. The gauge may be mounted on a surface with the first thermographic phosphor in contact with the surface. A light source is directed at the gauge, causing the phosphors to luminesce. The luminescence produced by the phosphors is collected and its spectra analyzed in order to determine the heat flux on the surface. First and second phosphor layers must be different materials to assure that the spectral lines collected will be distinguishable.

Noel, Bruce W. (Espanola, NM); Borella, Henry M. (Santa Barbara, CA); Cates, Michael R. (Oak Ridge, TN); Turley, W. Dale (Santa Barbara, CA); MacArthur, Charles D. (Clayton, OH); Cala, Gregory C. (Dayton, OH)

1991-01-01T23:59:59.000Z

309

Air heating system  

DOE Patents (OSTI)

A self-starting, fuel-fired, air heating system including a vapor generator, a turbine, and a condenser connected in a closed circuit such that the vapor output from the vapor generator is conducted to the turbine and then to the condenser where it is condensed for return to the vapor generator. The turbine drives an air blower which passes air over the condenser for cooling the condenser. Also, a condensate pump is driven by the turbine. The disclosure is particularly concerned with the provision of heat exchanger and circuitry for cooling the condensed fluid output from the pump prior to its return to the vapor generator.

Primeau, John J. (19800 Seminole Rd., Euclid, OH 44117)

1983-03-01T23:59:59.000Z

310

Potassium, Uranium, Thorium Radiogenic Heat Contribution To Heat Flow In  

Open Energy Info (EERE)

Potassium, Uranium, Thorium Radiogenic Heat Contribution To Heat Flow In Potassium, Uranium, Thorium Radiogenic Heat Contribution To Heat Flow In The Precambrian And Younger Silicic Rocks Of The Zuni And Florida Mountains, New Mexico (Usa) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Potassium, Uranium, Thorium Radiogenic Heat Contribution To Heat Flow In The Precambrian And Younger Silicic Rocks Of The Zuni And Florida Mountains, New Mexico (Usa) Details Activities (4) Areas (2) Regions (0) Abstract: High heat flow in the Zuni Mountains, New Mexico, U.S.A., has been explained by the possible presence of a buried felsic pluton. Alternately, high K, U, Th abundances have been proposed to account for part of the high heat flow. The mean radiogenic heat contribution for 60 samples of Precambrian core rocks is 7.23 μcal/gm-yr, which is slightly

311

Patch layout generation by detecting feature networks  

Science Journals Connector (OSTI)

Abstract The patch layout of 3D surfaces reveals the high-level geometric and topological structures. In this paper, we study the patch layout computation by detecting and enclosing feature loops on surfaces. We present a hybrid framework which combines several key ingredients, including feature detection, feature filtering, feature curve extension, patch subdivision and boundary smoothing. Our framework is able to compute patch layouts through concave features as previous approaches, but also able to generate nice layouts through smoothing regions. We demonstrate the effectiveness of our framework by comparing with the state-of-the-art methods.

Yuanhao Cao; Dong-Ming Yan; Peter Wonka

2014-01-01T23:59:59.000Z

312

Relict Geothermal Features | Open Energy Information  

Open Energy Info (EERE)

Relict Geothermal Features Relict Geothermal Features Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Print PDF Relict Geothermal Features Dictionary.png Relict Geothermal Features: No definition has been provided for this term. Add a Definition Relict geothermal surface feature, include the mineral formations left behind by hot springs, fumaroles, and geysers as well as the alteration of minerals by geothermal waters (e.g. opalization of sediments). Such alteration and deposits are indicators of past hydrothermal activity. Though surface activity has ceased in many areas, relict geothermal features may indicate the presence of a still active geothermal system below the surface. Retrieved from "http://en.openei.org/w/index.php?title=Relict_Geothermal_Features&oldid=600720"

313

Heat driven heat pump using paired ammoniated salts  

SciTech Connect

A cycle for a heat driven heat pump using two salts CaCl/sup 2/.8NH/sup 3/, and ZnCl/sup 2/.4NH3 which may reversibly react with ammonia with the addition or evolution of heat. These salts were chosen so that both ammoniation processes occur at the same temperature so that the heat evolved may be used for comfort heating. The heat to drive the system need only be slightly hotter than 122 C. The low temperature source need only be slightly warmer than 0 C.

Dunlap, R.M.

1980-08-29T23:59:59.000Z

314

Experimental Research on Solar Assisted Heat Pump Heating System with Latent Heat Storage  

E-Print Network (OSTI)

-reaching meaning of solving energy and environment problems if new type energy conservation and environment protection heating system ? solar assisted ground-source heat pump (SAGHP) heating system with a latent heat storage tank will be practical... was established at the laboratory of construction energy conservation in Harbin Institute of Technology (HIT) in 2004. It added a latent heat storage tank in original SAGHP system. The schematic diagram of the system is shown in Figure 1. The experimental...

Han, Z.; Zheng, M.; Liu, W.; Wang, F.

2006-01-01T23:59:59.000Z

315

Special Feature: Quantum Measurement Standards  

Science Journals Connector (OSTI)

This special feature is intended to present a comprehensive review of the present state and novel trends in the field of quantum measurement standards. Most of the present metrological research is concentrated on establishing and strengthening the links between the units and fundamental constants. This will be demonstrated in the nine articles in this feature. The first four articles are devoted to time, frequency and length metrology. They describe quantum standards that are used or intended to be used for the realization of the SI base units of time and length, the second and the metre. The two units are related to each other by an adopted fixed value of the speed of light in vacuum and the second is at present defined by the energy difference (frequency) of a hyperfine transition in the ground state of caesium. The special feature starts with the discussion of caesium atomic clocks as direct realizations of the second and as a basis for other standards (e.g. the Josephson voltage quantum standard). Whereas Cs atomic clocks still provide us with the most accurate realization of the second, optical frequency standards based on cold trapped ions or cold atoms may eventually lead us to even lower uncertainty levels and may replace the present definition of the second by an optical transition. This situation is described in the contribution on optical frequency standards based on trapped single ions. Since optical frequency standards are also needed as wavelength standards in length metrology, the third contribution reviews the definition of the metre. It describes the different methods of realization, in particular by optical frequency standards including standards based on cold atoms. The use of optical frequency standards in time and length metrology requires the precise knowledge of their frequencies. Methods of optical frequency measurements based on various methodsincluding frequency comb generatorsare discussed in the fourth article. Turning to the electric units, the discovery of two macroscopic quantum effects, the Josephson effectdiscovered in the early sixtiesand the quantum Hall effectdiscovered in 1980allowed the linking of electric units to fundamental constants. By use of the Josephson effect quantized voltage values are realized as multiples of the product of a certain frequency and of the superconducting flux quantum (h/2e). Quantized resistance values are realized with the quantum Hall effect as submultiples of h/e2, where this fundamental constant can also be interpreted as the quotient of the flux quantum of a normal conductor and the elementary charge. The metrological application became much easier by making use of the possibility of designing and manufacturing appropriate samples with microelectronic techniques. Since 1990 all calibrations of voltages or resistances worldwide have been based on these two quantum effects. Relative uncertainties of the order of 10-9 are obtained. International comparisons have proved that the calibration results in different laboratories also agree within relative uncertainties of a few parts in 109. Great attempts have also been made to realize a current quantum standard by counting single electrons. The Josephson effect and its application are described by Kohlmann and co-workers. The quantum Hall effect is only briefly described in this issue of Measurement Science and Technology since a comprehensive review article by Jeckelmann and Jeanneret appeared recently [1]. The unit of mass, the kilogram, is the only base unit in the SI that is derived from an artefact. Therefore one major task of today's metrological research is the linking of the unit of mass to a fundamental constant. There are two rival attempts: the comparison of mechanical and electrical power using the watt-balance and the counting of a large number of identical particles, like atoms or ions. The watt balance was pioneered by B Kibble. This experiment consists of two parts. A balance in equilibrium is opposed to a gravitational force and to a force on a coil fed by a current and opp

Erich Braun; Jrgen Helmcke

2003-01-01T23:59:59.000Z

316

Planetary heat flow measurements  

Science Journals Connector (OSTI)

...ESA's Rosetta mission towards comet Churyumov-Gerasimenko. It...Heat flow measurements on comets have a different motivation...penetrator is by no means limited to comets; it has also been tested in...measurement. Currently, a landing on Mercury within the framework...

2005-01-01T23:59:59.000Z

317

Solar Heating and Cooling  

Science Journals Connector (OSTI)

...radiation during good weather are not very high, and...Atmospheric Administration weather ser-vice measures total...largely to experi-mental operation of 3-ton LiBr-H2O...a million solar water heaters are in use in these countries...air House heating load Cold air return 'S T~rgeo...

John A. Duffie; William A. Beckman

1976-01-16T23:59:59.000Z

318

Water-Heating Dehumidifier  

A small appliance developed at ORNL dehumidifies air and then recycles heat to warm water in a water heater. The device circulates cool, dry air in summer and warm air in winter. In addition, the invention can cut the energy required to run a conventional water heater by an estimated 50 per cent....

2010-12-08T23:59:59.000Z

319

INSULATION OF HEATING SYSTEMS  

Science Journals Connector (OSTI)

... C. PALLOT gave a Cantor Lecture to the Royal Society of Arts on Thermal Insulation at Medium Temperature on November 23 ; the lecture, which included many topics of ... many topics of current interest, has now been published1. In a bulletin on heat insulation issued by the Ministry of Fuel and Power, it was pointed out that "In ...

1943-05-22T23:59:59.000Z

320

Exotic heat PDE's  

E-Print Network (OSTI)

Exotic heat equations that allow to prove the Poincar\\'e conjecture, some related problems and suitable generalizations too are considered. The methodology used is the PDE's algebraic topology, introduced by A. Pr\\'astaro in the geometry of PDE's, in order to characterize global solutions.

Agostino Prstaro

2010-06-23T23:59:59.000Z

Note: This page contains sample records for the topic "recs features heating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Roberts's Heat and Thermodynamics  

Science Journals Connector (OSTI)

... the last edition of the late Dr. J. K. Roberts's "Heat and Thermodynamics" appeared. The new material incorporated in this, the fourth edition, by Dr. ... ', but simply because new problems have afforded such excellent examples of the application of thermodynamics that their study must surely help the reader to a better understanding of the subject ...

G. R. NOAKES

1952-01-12T23:59:59.000Z

322

Wastewater heat recovery apparatus  

DOE Patents (OSTI)

A heat recovery system is described with a heat exchanger and a mixing valve. A drain trap includes a heat exchanger with an inner coiled tube, baffle plate, wastewater inlet, wastewater outlet, cold water inlet, and preheated water outlet. Wastewater enters the drain trap through the wastewater inlet, is slowed and spread by the baffle plate, and passes downward to the wastewater outlet. Cold water enters the inner tube through the cold water inlet and flows generally upward, taking on heat from the wastewater. This preheated water is fed to the mixing valve, which includes a flexible yoke to which are attached an adjustable steel rod, two stationary zinc rods, and a pivoting arm. The free end of the arm forms a pad which rests against a valve seat. The rods and pivoting arm expand or contract as the temperature of the incoming preheated water changes. The zinc rods expand more than the steel rod, flexing the yoke and rotating the pivoting arm. The pad moves towards the valve seat as the temperature of the preheated water rises, and away as the temperature falls, admitting a variable amount of hot water to maintain a nearly constant average process water temperature. 6 figs.

Kronberg, J.W.

1992-09-01T23:59:59.000Z

323

Wastewater heat recovery apparatus  

DOE Patents (OSTI)

A heat recovery system with a heat exchanger and a mixing valve. A drain trap includes a heat exchanger with an inner coiled tube, baffle plate, wastewater inlet, wastewater outlet, cold water inlet, and preheated water outlet. Wastewater enters the drain trap through the wastewater inlet, is slowed and spread by the baffle plate, and passes downward to the wastewater outlet. Cold water enters the inner tube through the cold water inlet and flows generally upward, taking on heat from the wastewater. This preheated water is fed to the mixing valve, which includes a flexible yoke to which are attached an adjustable steel rod, two stationary zinc rods, and a pivoting arm. The free end of the arm forms a pad which rests against a valve seat. The rods and pivoting arm expand or contract as the temperature of the incoming preheated water changes. The zinc rods expand more than the steel rod, flexing the yoke and rotating the pivoting arm. The pad moves towards the valve seat as the temperature of the preheated water rises, and away as the temperature falls, admitting a variable amount of hot water to maintain a nearly constant average process water temperature.

Kronberg, James W. (108 Independent Blvd., Aiken, SC 29801)

1992-01-01T23:59:59.000Z

324

Water Heating | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Water Heating Water Heating Water Heating Infographic: Water Heaters 101 Everything you need to know about saving money on water heating costs Read more Selecting a New Water Heater Tankless? Storage? Solar? Save money on your water heating bill by choosing the right type of energy-efficient water heater for your needs. Read more Sizing a New Water Heater When buying a new water heater, bigger is not always better. Learn how to buy the right size of water heater. Read more You can reduce your monthly water heating bills by selecting the appropriate water heater for your home or pool and by using some energy-efficient water heating strategies. Some simple do-it-yourself projects, like insulating hot water pipes and lowering your water heating temperature, can also help you save money and energy on your water heating.

325

Integrated solar heating unit  

SciTech Connect

This patent describes an integral solar heating unit with an integral solar collector and hot water storage system, the unit comprising: (a) a housing; (b) a flat plate solar collector panel mounted in the housing and having a generally horizontal upper edge and an uninsulated, open back surface; (c) a cylindrical hot water tank operatively connected to the solar collector panel and mounted in the housing generally parallel to and adjacent to the upper edge; (d) the housing comprising a hood around the tank a pair of side skirts extending down at the sides of the panel. The hood and side skirts terminate at lower edges which together substantially define a plane such that upon placing the heating unit on a generally planar surface, the housing substantially encapsulates the collector panel and hot water tank in a substantially enclosed air space; (e) the collector including longitudinally extended U-shaped collector tubes and a glazed window to pass radiation through to the collector tubes, and a first cold water manifold connected to the tubes for delivering fresh water thereto and a second hot water manifold connected to the tubes to remove heated water therefrom. The manifolds are adjacent and at least somewhat above and in direct thermal contact with the tank; and, (f) the skirts and hood lapping around the collector panel, exposing only the glazed window, such that everything else in the heating unit is enclosed by the housing such that heat emanating from the uninsulated, open back face of the collector and tank is captured and retained by the housing to warm the manifolds.

Larkin, W.J.

1987-01-20T23:59:59.000Z

326

MA et al.: SKETCH RETRIEVAL VIA STROKE FEATURES 1 Sketch Retrieval via Dense Stroke Features  

E-Print Network (OSTI)

MA et al.: SKETCH RETRIEVAL VIA STROKE FEATURES 1 Sketch Retrieval via Dense Stroke Features Chao search method. In this paper, we propose a representation scheme which takes sketch strokes into account with local features, thereby facilitat- ing efficient retrieval with codebooks. Stroke features are detected

Yang, Ming-Hsuan

327

Pagosa Springs District Heating District Heating Low Temperature Geothermal  

Open Energy Info (EERE)

District Heating District Heating Low Temperature Geothermal District Heating District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Pagosa Springs District Heating District Heating Low Temperature Geothermal Facility Facility Pagosa Springs District Heating Sector Geothermal energy Type District Heating Location Pagosa Springs, Colorado Coordinates 37.26945°, -107.0097617° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[]}

328

City of Klamath Falls District Heating District Heating Low Temperature  

Open Energy Info (EERE)

District Heating District Heating Low Temperature District Heating District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name City of Klamath Falls District Heating District Heating Low Temperature Geothermal Facility Facility City of Klamath Falls District Heating Sector Geothermal energy Type District Heating Location Klamath Falls, Oregon Coordinates 42.224867°, -121.7816704° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[]}

329

Kethcum District Heating District Heating Low Temperature Geothermal  

Open Energy Info (EERE)

Kethcum District Heating District Heating Low Temperature Geothermal Kethcum District Heating District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Kethcum District Heating District Heating Low Temperature Geothermal Facility Facility Kethcum District Heating Sector Geothermal energy Type District Heating Location Ketchum, Idaho Coordinates 43.6807402°, -114.3636619° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[]}

330

San Bernardino District Heating District Heating Low Temperature Geothermal  

Open Energy Info (EERE)

Bernardino District Heating District Heating Low Temperature Geothermal Bernardino District Heating District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name San Bernardino District Heating District Heating Low Temperature Geothermal Facility Facility San Bernardino District Heating Sector Geothermal energy Type District Heating Location San Bernardino, California Coordinates 34.1083449°, -117.2897652° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[]}

331

Boise City Geothermal District Heating District Heating Low Temperature  

Open Energy Info (EERE)

Boise City Geothermal District Heating District Heating Low Temperature Boise City Geothermal District Heating District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Boise City Geothermal District Heating District Heating Low Temperature Geothermal Facility Facility Boise City Geothermal District Heating Sector Geothermal energy Type District Heating Location Boise, Idaho Coordinates 43.6135002°, -116.2034505° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[]}

332

Elko District Heat District Heating Low Temperature Geothermal Facility |  

Open Energy Info (EERE)

Heat District Heating Low Temperature Geothermal Facility Heat District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Elko District Heat District Heating Low Temperature Geothermal Facility Facility Elko District Heat Sector Geothermal energy Type District Heating Location Elko, Nevada Coordinates 40.8324211°, -115.7631232° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[]}

333

Philip District Heating District Heating Low Temperature Geothermal  

Open Energy Info (EERE)

Philip District Heating District Heating Low Temperature Geothermal Philip District Heating District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Philip District Heating District Heating Low Temperature Geothermal Facility Facility Philip District Heating Sector Geothermal energy Type District Heating Location Philip, South Dakota Coordinates 44.0394329°, -101.6651441° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[]}

334

Modeling of Heat Transfer in Geothermal Heat Exchangers  

E-Print Network (OSTI)

Ground-coupled heat pump (GCHP) systems have been gaining increasing popularity for space conditioning in residential and commercial buildings. The geothermal heat exchanger (GHE) is devised for extraction or injection of thermal energy from...

Cui, P.; Man, Y.; Fang, Z.

2006-01-01T23:59:59.000Z

335

Cryogenic Fluid Flow Heat Transfer in a Porous Heat Exchanger  

Science Journals Connector (OSTI)

The recent utilization of porous heat exchangers in various key industries has aroused considerable interest in the heat transfer and fluid dynamics processes in channel flows involving suction...1], suction with...

L. L. Vasiliev; G. I. Bobrova; S. K. Vinokurov

1978-01-01T23:59:59.000Z

336

Convective Heat Transfer and Fluid Dynamics in Heat Exchanger Applications  

Science Journals Connector (OSTI)

This article concerns the local structure of flow and temperature fields as well as overall heat transfer coefficients and pressure drops in flow passages of relevance for heat exchangers. Results from investi...

Bengt Sundn

1999-01-01T23:59:59.000Z

337

Solar Heating with Annual Heat Storage Modelling and Practice  

Science Journals Connector (OSTI)

Central solar heating systems with seasonal heat storage are recognized as one of the most potential forms of solar energy utilization at northern latitudes. Because of ... and energy flows of a full-scale distri...

P. D. Lund; S. S. Peltola

1984-01-01T23:59:59.000Z

338

Low Level Heat Recovery Through Heat Pumps and Vapor Recompression  

E-Print Network (OSTI)

The intent of this paper is to examine the methods and economics of recovering low level heat through heat pumps and vapor recompression. Actual commercially available equipment is considered to determine the near-term and future economic viability...

Gilbert, J.

1980-01-01T23:59:59.000Z

339

Waste Heat Management Options: Industrial Process Heating Systems  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

itself * Waste heat recovery or auxiliary or adjoining systems within a plant * Waste heat to power conversion Recycle Copyrighted - E3M Inc. August 20, 2009 Arvind Thekdi, E3M...

340

Midland District Heating District Heating Low Temperature Geothermal  

Open Energy Info (EERE)

Midland District Heating District Heating Low Temperature Geothermal Midland District Heating District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Midland District Heating District Heating Low Temperature Geothermal Facility Facility Midland District Heating Sector Geothermal energy Type District Heating Location Midland, South Dakota Coordinates 44.0716539°, -101.1554178° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[]}

Note: This page contains sample records for the topic "recs features heating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Susanville District Heating District Heating Low Temperature Geothermal  

Open Energy Info (EERE)

Susanville District Heating District Heating Low Temperature Geothermal Susanville District Heating District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Susanville District Heating District Heating Low Temperature Geothermal Facility Facility Susanville District Heating Sector Geothermal energy Type District Heating Location Susanville, California Coordinates 40.4162842°, -120.6530063° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[]}

342

The JT-60 radio-frequency heating system: description and R&D results  

Science Journals Connector (OSTI)

A system feature of the radio-frequency (RF) heating system for JT-60 is described. This system contains three units Lower Hybrid Range of Frequencies (LHRF) and one unit Ion Cyclotron Range of Frequencies (ICRF) heating systems. The LHRF heating system produces about 24 MW at 2 \\{GHz\\} of RF power using 24 high power klystrons and the ICRF heating system does 6 MW at 120 \\{MHz\\} of RF power using 8 high power tetrodes. Development of a high power klystron for the LHRF heating system and the coupling system for high power density of the transmission are performed for the construction of the RF heating system for JT-60. Japan Atomic Energy Research Institute (JAERI) has already constructed the RF heating system for JT-60 and is now performing the coupling test to JT-60 plasma.

T. Nagashima; K. Uehara; H. Kimura; T. Imai; T. Fujii; K. Sakamoto; Y. Ikeda; M. Saigusa; N. Suzuki; M. Honda; K. Yokokura; K. Kiyono; M. Sawahata; K. Suganuma; M. Seki; H. Shirakata

1987-01-01T23:59:59.000Z

343

Energy Evaluation for Lignite Pyrolysis by Solid Heat Carrier Coupled with Gasification  

Science Journals Connector (OSTI)

Between the two reactors, solid heat carriers are circulated to carry the heat from the gasifier to the pyrolyzer. ... With the purpose of revealing the features of energy use and chemical element conversion, and the feasibility and the rationality of the coupled system, some related experiments were performed, and the simulation flow sheet for lignite pyrolysis by a solid heat carrier coupled with gasification was established by Aspen Plus 11.1 on the basis of the experimental data. ... The amount of the solid heat carrier was determined by two factors: (1) the temperature of the solid heat carrier should be heated to 750 C in the combustion furnace; (2) the energy carried by the solid heat carrier must be sufficient to satisfy the energy demands of the drying and pyrolysis units. ...

Qun Yi; Jie Feng; Bingchuan Lu; Jing Deng; Changlian Yu; Wenying Li

2013-07-12T23:59:59.000Z

344

Property:TopoFeatures | Open Energy Information  

Open Energy Info (EERE)

Property Property Edit with form History Facebook icon Twitter icon » Property:TopoFeatures Jump to: navigation, search Property Name TopoFeatures Property Type String Description Describes topographic features within the vicinity of the field (e.g. volcanic features, rift valleys, extensional features) that may be significant reflections of underlying geothermal resources. This is a property of type Page. Subproperties This property has the following 4 subproperties: G Geysers Geothermal Area L Lightning Dock Geothermal Area S Soda Lake Geothermal Area Stillwater Geothermal Area Pages using the property "TopoFeatures" Showing 23 pages using this property. A Amedee Geothermal Area + Horst and Graben + B Beowawe Hot Springs Geothermal Area + Horst and Graben +

345

Heat engine Device that transforms heat into work.  

E-Print Network (OSTI)

, and rocket engines are heat engines. So are steam engines and turbines #12;2 refrigerator Device that uses by steam turbines. Steam turbines, jet engines and rocket engines use a Brayton cycle #12;4 Steam turbines1 Heat engine Device that transforms heat into work. It requires two energy reservoirs at different

Winokur, Michael

346

Fast reactor power plant design having heat pipe heat exchanger  

DOE Patents (OSTI)

The invention relates to a pool-type fission reactor power plant design having a reactor vessel containing a primary coolant (such as liquid sodium), and a steam expansion device powered by a pressurized water/steam coolant system. Heat pipe means are disposed between the primary and water coolants to complete the heat transfer therebetween. The heat pipes are vertically oriented, penetrating the reactor deck and being directly submerged in the primary coolant. A U-tube or line passes through each heat pipe, extended over most of the length of the heat pipe and having its walls spaced from but closely proximate to and generally facing the surrounding walls of the heat pipe. The water/steam coolant loop includes each U-tube and the steam expansion device. A heat transfer medium (such as mercury) fills each of the heat pipes. The thermal energy from the primary coolant is transferred to the water coolant by isothermal evaporation-condensation of the heat transfer medium between the heat pipe and U-tube walls, the heat transfer medium moving within the heat pipe primarily transversely between these walls.

Huebotter, P.R.; McLennan, G.A.

1984-08-30T23:59:59.000Z

347

Fast reactor power plant design having heat pipe heat exchanger  

DOE Patents (OSTI)

The invention relates to a pool-type fission reactor power plant design having a reactor vessel containing a primary coolant (such as liquid sodium), and a steam expansion device powered by a pressurized water/steam coolant system. Heat pipe means are disposed between the primary and water coolants to complete the heat transfer therebetween. The heat pipes are vertically oriented, penetrating the reactor deck and being directly submerged in the primary coolant. A U-tube or line passes through each heat pipe, extended over most of the length of the heat pipe and having its walls spaced from but closely proximate to and generally facing the surrounding walls of the heat pipe. The water/steam coolant loop includes each U-tube and the steam expansion device. A heat transfer medium (such as mercury) fills each of the heat pipes. The thermal energy from the primary coolant is transferred to the water coolant by isothermal evaporation-condensation of the heat transfer medium between the heat pipe and U-tube walls, the heat transfer medium moving within the heat pipe primarily transversely between these walls.

Huebotter, Paul R. (Western Springs, IL); McLennan, George A. (Downers Grove, IL)

1985-01-01T23:59:59.000Z

348

Gamma ray bursts and spectral features  

Science Journals Connector (OSTI)

The situation concerning the presence of features in gamma ray burst (GRB) spectra is analyzed taking into account recent results obtained especially with the PHOBOS probes and GINGA satellite. If the existence of cyclotron features seems now to be generally accepted the situation for the other features reported around 400?500 keV is not completely clarified. The presence of such features is discussed. Moreover some aspects of the high and low energy variations in the GRB and on the characteristics of their total spectrum are also reviewed. Finally future missions which might have a great impact in the GRB spectral analysis will be shortly considered.

E. Jourdain

1991-01-01T23:59:59.000Z

349

ARM - Feature Stories and Releases Article  

NLE Websites -- All DOE Office Websites (Extended Search)

5, 2014 Feature Stories and Releases Biogenic Aerosols Examined in Finland Forest Bookmark and Share The second ARM Mobile Facility (AMF2) is operating in Hyytil, Finland,...

350

ARM - Feature Stories and Releases Article  

NLE Websites -- All DOE Office Websites (Extended Search)

activities, but still features the familiar faces of Professor Polar Bear, Teacher Turtle, and PI Prairie Dog. These "mascots" represent the ARM Climate Research Facility's...

351

Faculty Positions Heat Transfer and  

E-Print Network (OSTI)

Faculty Positions Heat Transfer and Thermal/Energy Sciences Naval Postgraduate School Monterey-track faculty position at the assistant professor level in the areas of Heat Transfer and Thermal/Fluid Sciences

352

Solar Industrial Process Heat Production  

Science Journals Connector (OSTI)

An overview of state of the art in producing industrial process heat via solar energy is presented. End-use matching methodology for assessing solar industrial process heat application potential is described f...

E. zil

1987-01-01T23:59:59.000Z

353

Complex Compound Chemical Heat Pumps  

E-Print Network (OSTI)

industrial heat pumps. The main emphasis was directed towards a conceptual temperature amplifier bench scale prototype design, which allows for the conversion to heat amplifier operation by the mere exchange of adsorbent working fluid component without...

Rockenfeller, U.; Langeliers, J.; Horn, G.

354

Heat Pumps | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

heat pump can deliver one-and-a-half to three times more heat energy to a home than the electrical energy it consumes. | Photo courtesy of iStockPhotoYinYang. If you live in a...

355

Residential heating oil prices decrease  

U.S. Energy Information Administration (EIA) Indexed Site

heating oil prices decrease The average retail price for home heating oil fell 1.7 cents from a week ago to 4.02 per gallon. That's up 1.7 cents from a year ago, based on the...

356

Residential heating oil price decreases  

Annual Energy Outlook 2012 (EIA)

heating oil price decreases The average retail price for home heating oil fell 7.8 cents from a week ago to 3.14 per gallon. That's down 81.1 cents from a year ago, based on the...

357

Residential heating oil price decreases  

Annual Energy Outlook 2012 (EIA)

heating oil price decreases The average retail price for home heating oil fell 10.5 cents from a week ago to 3.22 per gallon. That's down 73.6 cents from a year ago, based on the...

358

Residential heating oil price decreases  

Gasoline and Diesel Fuel Update (EIA)

heating oil price decreases The average retail price for home heating oil fell 1.8 cents from a week ago to 2.82 per gallon. That's down 1.36 from a year ago, based on the...

359

Residential heating oil prices decline  

Annual Energy Outlook 2012 (EIA)

heating oil price decreases The average retail price for home heating oil fell 2 cents from a week ago to 3.36 per gallon. That's down 52.5 cents from a year ago, based on the...

360

Residential heating oil prices increase  

U.S. Energy Information Administration (EIA) Indexed Site

heating oil prices increase The average retail price for home heating oil rose 3.9 cents last week to 3.96 per gallon. That's down 2.6 cents from a year ago, based on the...

Note: This page contains sample records for the topic "recs features heating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Residential heating oil price decreases  

NLE Websites -- All DOE Office Websites (Extended Search)

05, 2014 Residential heating oil price decreases The average retail price for home heating oil fell 1.9 cents from a week ago to 3.43 per gallon. That's down 39 cents from a year...

362

Residential heating oil price decreases  

U.S. Energy Information Administration (EIA) Indexed Site

4 Residential heating oil price decreases The average retail price for home heating oil fell 1.6 cents from a week ago to 3.42 per gallon. That's down 39.5 cents from a year ago,...

363

Residential heating oil prices decrease  

Annual Energy Outlook 2012 (EIA)

heating oil price decreases The average retail price for home heating oil fell 2.9 cents from a week ago to 3.45 per gallon. That's down 36.6 cents from a year ago, based on the...

364

Residential heating oil prices decline  

U.S. Energy Information Administration (EIA) Indexed Site

heating oil price decreases The average retail price for home heating oil fell 3.3 cents from a week ago to 3.38 per gallon. That's down 43.9 cents from a year ago, based on the...

365

Residential heating oil prices increase  

U.S. Energy Information Administration (EIA) Indexed Site

5, 2014 Residential heating oil prices increase The average retail price for home heating oil rose 6.5 cents from a week ago to 4.24 per gallon. That's up 14.9 cents from a year...

366

Residential heating oil price decreases  

NLE Websites -- All DOE Office Websites (Extended Search)

6, 2014 Residential heating oil price decreases The average retail price for home heating oil rose 1.6 cents from a week ago to 4.24 per gallon. That's up 8.9 cents from a year...

367

Residential heating oil prices decline  

Annual Energy Outlook 2012 (EIA)

heating oil price decreases The average retail price for home heating oil fell 6.3 cents from a week ago to 3.08 per gallon. That's down 90.3 cents from a year ago, based on the...

368

Residential heating oil price decreases  

U.S. Energy Information Administration (EIA) Indexed Site

heating oil price decreases The average retail price for home heating oil fell 3.8 cents from a week ago to 3.33 per gallon. That's down 59.1 cents from a year ago, based on the...

369

Residential heating oil prices increase  

U.S. Energy Information Administration (EIA) Indexed Site

heating oil prices increase The average retail price for home heating oil rose 5.4 cents from a week ago to 4.04 per gallon. That's up 4.9 cents from a year ago, based on the...

370

Residential heating oil prices increase  

U.S. Energy Information Administration (EIA) Indexed Site

heating oil prices increase The average retail price for home heating oil rose 2.9 cents from a week ago to 3.98 per gallon. That's up 6-tenths of a penny from a year ago, based...

371

Residential heating oil prices increase  

U.S. Energy Information Administration (EIA) Indexed Site

3, 2014 Residential heating oil prices increase The average retail price for home heating oil rose 4.4 cents from a week ago to 4.06 per gallon. That's up 4.1 cents from a year...

372

Residential heating oil prices decrease  

U.S. Energy Information Administration (EIA) Indexed Site

5, 2014 Residential heating oil prices decrease The average retail price for home heating oil fell 1.8 cents from a week ago to 4.00 per gallon. That's down 2-tenths of a cent...

373

Residential heating oil prices increase  

U.S. Energy Information Administration (EIA) Indexed Site

heating oil prices increase The average retail price for home heating oil rose 12 cents from a week ago to 4.18 per gallon. That's up 13 cents from a year ago, based on the...

374

Residential heating oil prices available  

NLE Websites -- All DOE Office Websites (Extended Search)

ago, based on the U.S. Energy Information Administration's weekly residential heating fuel price survey. Heating oil prices in the New England region are at 3.48 per gallon,...

375

Heat Pipes: An Industrial Application  

E-Print Network (OSTI)

This paper reviews the basics of heat pipe exchangers. Included are how they are constructed, how they operate, where they have application, and various aspects of evaluating a potential application. After discussing the technical aspects of heat...

Murray, F.

1984-01-01T23:59:59.000Z

376

Can You Afford Heat Recovery?  

E-Print Network (OSTI)

many companies to venture into heat recovery projects without due consideration of the many factors involved. Many of these efforts have rendered less desirable results than expected. Heat recovery in the form of recuperation should be considered...

Foust, L. T.

1983-01-01T23:59:59.000Z

377

Low Level Heat Recovery Technology  

E-Print Network (OSTI)

level heat recovery technology. This paper discusses heat distribution systems, latest developments in absorption refrigeration and organic Rankine cycles, and pressure, minimization possibilities. The relative merits and economics of the various...

O'Brien, W. J.

1982-01-01T23:59:59.000Z

378

Heating Oil and Propane Update  

NLE Websites -- All DOE Office Websites (Extended Search)

data not collected over the summer? The residential pricing data collected on heating oil and propane prices are for the Winter Heating Fuels Survey. The purpose of this survey...

379

#tipsEnergy: Saving on Home Heating Costs | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Saving on Home Heating Costs Saving on Home Heating Costs #tipsEnergy: Saving on Home Heating Costs November 23, 2012 - 3:37pm Addthis Rebecca Matulka Rebecca Matulka Digital Communications Specialist, Office of Public Affairs #tipsEnergy: Saving on Home Heating Costs A feature on the Energy Department's Twitter account, #tipsEnergy highlights ways to save energy and money at home. Once a month, we ask you to share your energy-saving tips so the larger energy community can learn from you, and we feature some of the best tips in a Storify. Storified by Energy Department · Fri, Nov 23 2012 12:37:07 As we head into December, the cold weather season is officially upon us, and nowhere is that more evident than on your utility bills. Home heating and cooling uses more energy than any other

380

Heat Source Lire,  

NLE Websites -- All DOE Office Websites (Extended Search)

Source Lire, Source Lire, (liayrICS-25 ) tooling Tulles (Ai 1,06:1) - 11 (31.118 Module Stack Thermoelectric Module:, (14) ltcal L/Mr r a it i lli tisli Block Mounting Interface MMRTG Design Housing (At 2219) Fin (At Go63) Thermal Insulation (Min-K & Microtherm) Space Radioisotope Power Systems Multi-Mission Radioisotope Thermoelectric Generator January 2008 What is a Multi-Mission Radioisotope Thermoelectric Generator? Space exploration missions require safe, reliable, long-lived power systems to provide electricity and heat to spacecraft and their science instruments. A uniquely capable source of power is the radioisotope thermoelectric generator (RTG) - essentially a nuclear battery that reliably converts heat into electricity. The Department of Energy and NASA are developing

Note: This page contains sample records for the topic "recs features heating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Solar Water Heating  

NLE Websites -- All DOE Office Websites (Extended Search)

publication provides basic informa- publication provides basic informa- tion on the components and types of solar water heaters currently available and the economic and environmental benefits of owning a system. Although the publica- tion does not provide information on building and installing your own system, it should help you discuss solar water heating systems intelligently with a solar equipment dealer. Solar water heaters, sometimes called

382

[Waste water heat recovery system  

SciTech Connect

The production capabilities for and field testing of the heat recovery system are described briefly. Drawings are included.

Not Available

1993-04-28T23:59:59.000Z

383

Heating Oil and Propane Update  

Gasoline and Diesel Fuel Update (EIA)

Maps of states participating in Winter Fuels Survey Residential propane PADD map Residential heating oil PADD map...

384

Characterization of industrial process waste heat and input heat streams  

SciTech Connect

The nature and extent of industrial waste heat associated with the manufacturing sector of the US economy are identified. Industry energy information is reviewed and the energy content in waste heat streams emanating from 108 energy-intensive industrial processes is estimated. Generic types of process equipment are identified and the energy content in gaseous, liquid, and steam waste streams emanating from this equipment is evaluated. Matchups between the energy content of waste heat streams and candidate uses are identified. The resultant matrix identifies 256 source/sink (waste heat/candidate input heat) temperature combinations. (MHR)

Wilfert, G.L.; Huber, H.B.; Dodge, R.E.; Garrett-Price, B.A.; Fassbender, L.L.; Griffin, E.A.; Brown, D.R.; Moore, N.L.

1984-05-01T23:59:59.000Z

385

Experimental and Analytical Studies on Pyroelectric Waste Heat Energy Conversion  

E-Print Network (OSTI)

Waste heat Pyroelectric energy3 Pyroelectric Waste Heat Energy Harvesting Using Heat4 Pyroelectric Waste Heat Energy Harvesting Using Relaxor

Lee, Felix

2012-01-01T23:59:59.000Z

386

Spring 2014 Heat Transfer -1  

E-Print Network (OSTI)

Spring 2014 1 Heat Transfer - 1 Consider a cylindrical nuclear fuel rod of length L and diameter df and the tube at a rate m , and the outer surface of the tube is well insulated. Heat generation occurs within. The specific heat of water pc , and the thermal conductivity of the fuel rod fk are constants. The system

Virginia Tech

387

5. Heat transfer Ron Zevenhoven  

E-Print Network (OSTI)

1/120 5. Heat transfer Ron Zevenhoven ?bo Akademi University Thermal and Flow Engineering / Värme Three heat transfer mechanisms Conduction Convection Radiation 2/120 Pic: B?88 ?bo Akademi University | Thermal and Flow Engineering | 20500 Turku | Finland #12;3/120 5.1 Conductive heat transfer ?bo Akademi

Zevenhoven, Ron

388

Energy 101: Geothermal Heat Pumps  

SciTech Connect

An energy-efficient heating and cooling alternative, the geothermal heat pump system moves heat from the ground to a building (or from a building to the ground) through a series of flexible pipe "loops" containing water. This edition of Energy 101 explores the benefits Geothermal and the science behind how it all comes together.

None

2011-01-01T23:59:59.000Z

389

Heat Pump Strategies and Payoffs  

E-Print Network (OSTI)

After evaluating numerous waste heat sources and heat pump designs for energy recovery, we have become aware that a great deal of confusion exists about the economics of heat pumps. The purpose of this article is to present some simple formulas...

Gilbert, J. S.

1982-01-01T23:59:59.000Z

390

Energy 101: Geothermal Heat Pumps  

ScienceCinema (OSTI)

An energy-efficient heating and cooling alternative, the geothermal heat pump system moves heat from the ground to a building (or from a building to the ground) through a series of flexible pipe "loops" containing water. This edition of Energy 101 explores the benefits Geothermal and the science behind how it all comes together.

None

2013-05-29T23:59:59.000Z

391

Research & Development Roadmap: Emerging Water Heating Technologies...  

Energy Savers (EERE)

Water Heating Technologies Research & Development Roadmap: Emerging Water Heating Technologies The Research and Development (R&D) Roadmap for Emerging Water Heating Technologies...

392

Water Heating Standing Technical Committee Presentation | Department...  

Energy Savers (EERE)

Water Heating Standing Technical Committee Presentation Water Heating Standing Technical Committee Presentation This presentation outlines the goals of the Water Heating Standing...

393

Heat and moisture transfer through clothing  

E-Print Network (OSTI)

R. C. Eberhart (ed), Heat transfer in medicine and biology.Convective and radiative heat transfer coefficients forsimulation of heat and moisture transfer in a human-

Voelker, Conrad; Hoffmann, Sabine; Kornadt, Oliver; Arens, Edward; Zhang, Hui; Huizenga, Charlie

2009-01-01T23:59:59.000Z

394

Heat Waves, Global Warming, and Mitigation  

E-Print Network (OSTI)

Heat Waves, Global Warming, and Mitigation Ann E. Carlson*2008]HEAT WAVES, GLOBAL WARMING, AND MITIGATION 175 stroke2001). 2008]HEAT WAVES, GLOBAL WARMING, AND MITIGATION 177

Carlson, Ann E.

2008-01-01T23:59:59.000Z

395

Reduce Radiation Losses from Heating Equipment  

Energy.gov (U.S. Department of Energy (DOE))

This tip sheet describes how to save process heating energy and costs by reducing expensive heat losses from industrial heating equipment, such as furnaces.

396

Process Heating Systems | Department of Energy  

Office of Environmental Management (EM)

Efficiency in Process Heating Systems Roadmap for Process Heating Technology Reduce Natural Gas Use in Your Industrial Process Heating Systems Save Energy Now in Your Process...

397

Heat Waves, Global Warming, and Mitigation  

E-Print Network (OSTI)

Heat Waves, Global Warming, and Mitigation Ann E. Carlson*II. HEAT WAVE DEFINITIONS .. A . HW aves B. Heat-related

Carlson, Ann E.

2008-01-01T23:59:59.000Z

398

Biomass Derivatives Competitive with Heating Oil Costs.  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Biomass Derivatives Competitive with Heating Oil Costs Transportation fuel Heat or electricity * Data are from literature, except heating oil is adjusted from 2011 winter average *...

399

Data Foundations Data Attributes and Features  

E-Print Network (OSTI)

1 Data Foundations Data Attributes and Features Data Pre-processing Data Storage Data Analysis Data Sources 1 Data Attributes Describing data content and characteristics Representing data Data Sortable Data Numerical Attributes 4 Discrete vs. Continuous #12;3 Statistical Features of Data 5

Fang, Shiaofen

400

Absorption Heat Pump Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Absorption Heat Pump Basics Absorption Heat Pump Basics Absorption Heat Pump Basics August 19, 2013 - 11:11am Addthis Absorption heat pumps are essentially air-source heat pumps driven not by electricity, but by a heat source such as natural gas, propane, solar-heated water, or geothermal-heated water. Because natural gas is the most common heat source for absorption heat pumps, they are also referred to as gas-fired heat pumps. There are also absorption coolers available that work on the same principal, but are not reversible and cannot serve as a heat source. These are also called gas-fired coolers. How Absorption Heat Pumps Work Residential absorption heat pumps use an ammonia-water absorption cycle to provide heating and cooling. As in a standard heat pump, the refrigerant (in this case, ammonia) is condensed in one coil to release its heat; its

Note: This page contains sample records for the topic "recs features heating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Absorption Heat Pumps | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Absorption Heat Pumps Absorption Heat Pumps Absorption Heat Pumps June 24, 2012 - 2:11pm Addthis Absorption heat pumps are essentially air-source heat pumps driven not by electricity, but by a heat source such as natural gas, propane, solar-heated water, or geothermal-heated water. Because natural gas is the most common heat source for absorption heat pumps, they are also referred to as gas-fired heat pumps. There are also absorption (or gas-fired) coolers available that work on the same principle. Unlike some absorption heat pumps, however, these are not reversible and cannot serve as a heat source. Residential absorption heat pumps use an ammonia-water absorption cycle to provide heating and cooling. As in a standard heat pump, the refrigerant (in this case, ammonia) is condensed in one coil to release its heat; its

402

Tips: Heat Pumps | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Heat Pumps Heat Pumps Tips: Heat Pumps June 24, 2013 - 5:48pm Addthis Heat pumps can be a cost-effective choice in moderate climates, especially if you heat your home with electricity. Heat pumps can be a cost-effective choice in moderate climates, especially if you heat your home with electricity. Heat pumps are the most efficient form of electric heating in moderate climates. Because they move heat rather than generate heat, heat pumps can provide equivalent space conditioning at as little as one quarter of the cost of operating conventional heating or cooling appliances. A heat pump does double duty as a central air conditioner by collecting the heat inside your house and pumping it outside. There are three types of heat pumps: air-to-air, water source, and geothermal. They collect heat from the air, water, or ground outside your

403

Absorption Heat Pumps | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Absorption Heat Pumps Absorption Heat Pumps Absorption Heat Pumps June 24, 2012 - 2:11pm Addthis Absorption heat pumps are essentially air-source heat pumps driven not by electricity, but by a heat source such as natural gas, propane, solar-heated water, or geothermal-heated water. Because natural gas is the most common heat source for absorption heat pumps, they are also referred to as gas-fired heat pumps. There are also absorption (or gas-fired) coolers available that work on the same principle. Unlike some absorption heat pumps, however, these are not reversible and cannot serve as a heat source. Residential absorption heat pumps use an ammonia-water absorption cycle to provide heating and cooling. As in a standard heat pump, the refrigerant (in this case, ammonia) is condensed in one coil to release its heat; its

404

Nature climate change features Los Alamos forest research  

NLE Websites -- All DOE Office Websites (Extended Search)

Nature climate change features forest research Nature climate change features Los Alamos forest research The print issue features as its cover story the tree-stress research of...

405

Nature Climate Change features Los Alamos forest research  

NLE Websites -- All DOE Office Websites (Extended Search)

Nature Climate Change Features Forest Research Nature Climate Change features Los Alamos forest research The print issue features as its cover story the tree-stress research of...

406

Archives and History Office: Short Features  

NLE Websites -- All DOE Office Websites (Extended Search)

Features > Short Features Features > Short Features Short Features in SLAC History 40th SLAC celebrated its 40th Anniversary in 2002 with a series of events and a photo book. 50th SLAC celebrated its 50th Anniversary in 2012 with a series of events and a special anniversary website: Celebrating 50 Years of Discovery. APS Burton Richter, Sid Drell , Martin Perl , and Herman Winick made presentations at the American Physical Society (APS) Centennial Celebration and Meeting ( March 20-26 1999). Angiogram The first synchrotron radiation coronary angiogram recorded on a human subject occurred in May 1986 at the Stanford Synchrotron Radiation Laboratory (SSRL). BaBar BaBar was dedicated on August 13, 1999. Beam Trees Beam trees are not actually beams or trees. Blue Book The Blue Book is a SLAC classic written to document for posterity the design and building of SLAC's two-mile accelerator. Available in full-text from the SLAC Library.

407

Chapter 17 - Nuclear heat energy  

Science Journals Connector (OSTI)

Abstract This chapter delves into the important heating processes within a nuclear power plant. Applying Fouriers law of heat conduction permits determining temperature distributions within the nuclear fuel rods. In contrast, convective cooling occurs on the rod surface. The coolant, cladding and fuel temperature distributions through a reactor are determined. Besides heat transfer in the reactor core, some power plants employ heat exchangers to generate steam that is fed to a turbine-generator to produce electricity. As a consequence of the second law of thermodynamics, thermal power plants reject condenser heat to the environment through mechanisms such as cooling towers.

Raymond L. Murray; Keith E. Holbert

2015-01-01T23:59:59.000Z

408

Environmentally Friendly Systems: Earth Heat Pump System with Vertical Pipes for Heat Extraction for Domestic Heating and Cooling  

Science Journals Connector (OSTI)

Geothermal heat pumps (GSHPs), or direct expansion (DX) ground source heat pumps, are highly efficient renewable energy technology, ... the earth, groundwater or surface water as heat sources when operating in heating

Saffa Riffat; Siddig Omer; Abdeen Omer

2014-01-01T23:59:59.000Z

409

NREL: Learning - Solar Process Heat  

NLE Websites -- All DOE Office Websites (Extended Search)

Process Heat Process Heat Photo of part of one side of a warehouse wall, where a perforated metal exterior skin is spaced about a foot out from the main building wall to form part of the transpired solar collector system. A transpired collector is installed at a FedEx facility in Denver, Colorado. Commercial and industrial buildings may use the same solar technologies-photovoltaics, passive heating, daylighting, and water heating-that are used for residential buildings. These nonresidential buildings can also use solar energy technologies that would be impractical for a home. These technologies include ventilation air preheating, solar process heating, and solar cooling. Space Heating Many large buildings need ventilated air to maintain indoor air quality. In cold climates, heating this air can use large amounts of energy. But a

410

Waste-heat recovery in batch processes using heat storage  

SciTech Connect

The waste-heat recovery in batch processes has been studied using the pinch-point method. The aim of the work has been to investigate theoretical and practical approaches to the design of heat-exchanger networks, including heat storage, for waste-heat recovery in batch processes. The study is limited to the incorporation of energy-storage systems based on fixed-temperature variable-mass stores. The background for preferring this to the alternatives (variable-temperature fixed-mass and constant-mass constant-temperature (latent-heat) stores) is given. It is shown that the maximum energy-saving targets as calculated by the pinch-point method (time average model, TAM) can be achieved by locating energy stores at either end of each process stream. This theoretically large number of heat-storage tanks (twice the number of process streams) can be reduced to just a few tanks. A simple procedure for determining a number of heat-storage tanks sufficient to achieve the maximum energy-saving targets as calculated by the pinch-point method is described. This procedure relies on combinatorial considerations, and could therefore be labeled the combinatorial method for incorporation of heat storage in heat-exchanger networks. Qualitative arguments justifying the procedure are presented. For simple systems, waste-heat recovery systems with only three heat-storage temperatures (a hot storage, a cold storage, and a heat store at the pinch temperature) often can achieve the maximum energy-saving targets. Through case studies, six of which are presented, it is found that a theoretically large number of heat-storage tanks (twice the number of process streams) can be reduced to just a few tanks. The description of these six cases is intended to be sufficiently detailed to serve as benchmark cases for development of alternative methods.

Stoltze, S.; Mikkelsen, J.; Lorentzen, B.; Petersen, P.M.; Qvale, B. [Technical Univ. of Denmark, Lyngby (Denmark). Lab. for Energetics

1995-06-01T23:59:59.000Z

411

Gelling by Heating  

E-Print Network (OSTI)

We introduce a simple model, a binary mixture of patchy particles, which has been designed to form a gel upon heating. Due to the specific nature of the particle interactions, notably the number and geometry of the patches as well as their interaction energies, the system is a fluid both at high and at low temperatures, whereas at intermediate temperatures the system forms a solid-like disordered open network structure, i.e. a gel. Using molecular dynamics we investigate the static and dynamic properties of this system.

Sandalo Roldan-Vargas; Frank Smallenburg; Walter Kob; Francesco Sciortino

2013-03-11T23:59:59.000Z

412

Locating Heat Recovery Opportunities  

E-Print Network (OSTI)

and for the years ahead is the de~ice known as the "Reat Pump," the "Reverse Ran,kine Cycle," or the "Vapor Compression System." ~'ctu? ally, all of these are the same thing. En-ergy level is restored by application of a ce~tain amount of prime energy (shaft... level Rankine cycle or bot toming cycle could have an application. Figure 11 shows the same hot process waste water heat source and the same disengaging drum that was shown in Figure 10. Instead of compressing the vapor, however, it is expanded...

Waterland, A. F.

1981-01-01T23:59:59.000Z

413

Heat Pump System Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Heat Pump System Basics Heat Pump System Basics Heat Pump System Basics August 19, 2013 - 11:02am Addthis Like a refrigerator, heat pumps use electricity to move heat from a cool space into a warm space, making the cool space cooler and the warm space warmer. Because they move heat rather than generate heat, heat pumps can provide up to four times the amount of energy they consume. Air-Source Heat Pump Transfers heat between the inside of a building and the outside air. Ductless Mini-Split Heat Pump Ductless versions of air-source heat pumps. Absorption Heat Pump Uses heat as its energy source. Geothermal Heat Pumps Use the constant temperature of the earth as the exchange medium instead of the outside air temperature. Addthis Related Articles A heat pump can provide an alternative to using your air conditioner. | Photo courtesy of iStockPhoto/LordRunar.

414

Heating System Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Heating System Basics Heating System Basics Heating System Basics August 16, 2013 - 2:32pm Addthis A variety of heating technologies are available today. You can learn more about what heating systems and heat pumps are commonly used today and how they work below. To learn how to use these technologies in your own home, see the Home Heating Systems section on Energy Saver. Furnaces and Boilers Furnaces heat air and distribute the heated air through a building using ducts. Boilers heat water, providing either hot water or steam for heating. Wood and Pellet Heating Provides a way to heat a building using biomass or waste sources. Electric Resistance Heating Can be supplied by centralized electric furnaces or by heaters in each room. Active Solar Heating Uses the sun to heat either air or liquid and can serve as a supplemental

415

The Homopolar Pulse Billet Heating Process  

E-Print Network (OSTI)

The use of homopolar generators operated in the pulse mode to heat forging billets offers several possible advantages over present heating methods. Because heating is uniform throughout the entire cross section, billets can safely be heated...

Keith, R. E.; Weldon, W. F.

1982-01-01T23:59:59.000Z

416

Tips: Heat Pumps | Department of Energy  

Energy Savers (EERE)

Tips: Heat Pumps Tips: Heat Pumps July 20, 2014 - 5:48pm Addthis Heat pumps can be a cost-effective choice in moderate climates, especially if you heat your home with electricity....

417

Heating System Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Heating System Basics Heating System Basics Heating System Basics August 16, 2013 - 2:32pm Addthis A variety of heating technologies are available today. You can learn more about what heating systems and heat pumps are commonly used today and how they work below. To learn how to use these technologies in your own home, see the Home Heating Systems section on Energy Saver. Furnaces and Boilers Furnaces heat air and distribute the heated air through a building using ducts. Boilers heat water, providing either hot water or steam for heating. Wood and Pellet Heating Provides a way to heat a building using biomass or waste sources. Electric Resistance Heating Can be supplied by centralized electric furnaces or by heaters in each room. Active Solar Heating Uses the sun to heat either air or liquid and can serve as a supplemental

418

Definition: Heat pump | Open Energy Information  

Open Energy Info (EERE)

pump pump Jump to: navigation, search Dictionary.png Heat pump Heating and/or cooling equipment that, during the heating season, draws heat into a building from outside and, during the cooling season, ejects heat from the building to the outside[1] View on Wikipedia Wikipedia Definition A heat pump is a device that transfers heat energy from a heat source to a heat sink against a temperature gradient. Heat pumps are designed to move thermal energy opposite the direction of spontaneous heat flow. A heat pump uses some amount of external high-grade energy to accomplish the desired transfer of thermal energy from heat source to heat sink. While compressor-driven air conditioners and freezers are familiar examples of heat pumps, the term "heat pump" is more general and applies to

419

Performance Optimization of an Irreversible Heat Pump with Variable-temperature Heat Reservoirs  

E-Print Network (OSTI)

An irreversible cycle model of a heat pump operating between two variable-temperature heat reservoirs is established and used to analyze the performance of the heat pump affected by heat resistances, heat leakage and internal dissipation...

Huang, Y.; Sun, D.

2006-01-01T23:59:59.000Z

420

Thermodynamics of enhanced heat transfer: a model study  

E-Print Network (OSTI)

Situations where a spontaneous process of energy or matter transfer is enhanced by an external device are widespread in nature (human sweating system, enzyme catalysis, facilitated diffusion across bio-membranes, industrial heat exchangers). The thermodynamics of such processes remains however open. Here we study enhanced heat transfer by a model junction immersed between two thermal baths at different temperatures $T_h$ and $T_c$ ($T_h>T_c$). The transferred heat power is enhanced via controlling the junction by means of external time-dependent fields. Provided that the spontaneous heat flow process is optimized over the junction Hamiltonian, any enhancement of this spontaneous process does demand consumption and subsequent dissipation of work. The efficiency of enhancement is defined via the increment in the heat power divided over the amount of consumed work. We show that this efficiency is bounded from above by $T_c/(T_h-T_c)$. Formally this is identical to the Carnot bound for the efficiency of ordinary refrigerators which transfer heat from cold to hot. It also shares some (but not all) physical features of the Carnot bound.

Karen Hovhannisyan; Armen E. Allahverdyan

2010-07-20T23:59:59.000Z

Note: This page contains sample records for the topic "recs features heating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Spray-Formed Tooling with Micro-Scale Features  

SciTech Connect

Molds, dies, and related tooling are used to shape many of the plastic and metal components we use every day at home and work. Traditional mold-making practices are labor and capital equipment intensive, involving multiple machining, benching and heat treatment operations. Spray forming is an alternative method to manufacture molds and dies. The general concept is to atomize and deposit droplets of a tooling alloy onto a pattern to form a thick deposit while imaging the patterns shape, surface texture and details. Unlike conventional machining, this approach can be used to fabricate tooling with micro-scale surface features. This paper describes a research effort to spray form molds and dies that are used to image micro-scale surface textures into polymers. The goal of the study is to replicate textures that give rise to superhydrophobic behavior by mimicking the surface structure of highly water repellent biological materials such as the lotus leaf. Spray conditions leading to high transfer fidelity of features into the surface of molded polymers will be described. Improvements in water repellency of these materials was quantified by measuring the static contact angle of water droplets on flat and textured surfaces.

Kevin McHugh

2010-06-01T23:59:59.000Z

422

Skutterudite Thermoelectric Generator For Automotive Waste Heat...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Skutterudite Thermoelectric Generator For Automotive Waste Heat Recovery Skutterudite Thermoelectric Generator For Automotive Waste Heat Recovery Skutterudite TE modules were...

423

Waste Heat Recovery Opportunities for Thermoelectric Generators...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Waste Heat Recovery Opportunities for Thermoelectric Generators Waste Heat Recovery Opportunities for Thermoelectric Generators Thermoelectrics have unique advantages for...

424

Passive Solar Space Heat | Open Energy Information  

Open Energy Info (EERE)

Passive Solar Space Heat Incentives Retrieved from "http:en.openei.orgwindex.php?titlePassiveSolarSpaceHeat&oldid26718...

425

Geothermal energy utilization with heat pipes  

Science Journals Connector (OSTI)

Several variants of heat pipes for utilization of geothermal energy and underground rock heat are studied. An...

L. L. Vasil'ev

1990-09-01T23:59:59.000Z

426

North Village Ground Source Heat Pumps  

Energy.gov (U.S. Department of Energy (DOE))

Overview: Installation of Ground Source Heat Pumps. Replacement of Aging Heat Pumps. Alignment with Furmans Sustainability Goals.

427

Distributed Generation with Heat Recovery and Storage  

E-Print Network (OSTI)

Energy; Grid systems; Optimization; Heat flow; Financialof grid power and by utilizing combined heat and power (CHP)

Siddiqui, Afzal S.; Marnay, Chris; Firestone, Ryan M.; Zhou, Nan

2008-01-01T23:59:59.000Z

428

Total Space Heat-  

Gasoline and Diesel Fuel Update (EIA)

Released: September, 2008 Released: September, 2008 Total Space Heat- ing Cool- ing Venti- lation Water Heat- ing Light- ing Cook- ing Refrig- eration Office Equip- ment Com- puters Other All Buildings* ........................... 3,037 115 397 384 52 1,143 22 354 64 148 357 Building Floorspace (Square Feet) 1,001 to 5,000 ........................... 386 19 43 18 11 93 7 137 8 12 38 5,001 to 10,000 .......................... 262 12 35 17 5 83 4 56 6 9 35 10,001 to 25,000 ........................ 407 20 46 44 8 151 3 53 9 19 54 25,001 to 50,000 ........................ 350 15 55 50 9 121 2 34 7 16 42 50,001 to 100,000 ...................... 405 16 57 65 7 158 2 29 6 18 45 100,001 to 200,000 .................... 483 16 62 80 5 195 1 24 Q 31 56 200,001 to 500,000 .................... 361 8 51 54 5 162 1 9 8 19 43 Over 500,000 ............................. 383 8 47 56 3 181 2 12 8 23 43 Principal Building Activity

429

Cab Heating and Cooling  

SciTech Connect

Schneider National, Inc., SNI, has concluded the Cab Heating and Cooling evaluation of onboard, engine off idling solutions. During the evaluation period three technologies were tested, a Webasto Airtronic diesel fired heater for cold weather operation, and two different approaches to cab cooling in warm weather, a Webasto Parking Cooler, phase change storage system and a Bergstrom Nite System, a 12 volt electrical air conditioning approach to cooling. Diesel fired cab heaters were concluded to provide adequate heat in winter environments down to 10 F. With a targeted idle reduction of 17%, the payback period is under 2 years. The Webasto Parking Cooler demonstrated the viability of this type of technology, but required significant driver involvement to achieve maximum performance. Drivers rated the technology as ''acceptable'', however, in individual discussions it became apparent they were not satisfied with the system limitations in hot weather, (over 85 F). The Bergstrom Nite system was recognized as an improvement by drivers and required less direct driver input to operate. While slightly improved over the Parking Cooler, the hot temperature limitations were only slightly better. Neither the Parking Cooler or the Nite System showed any payback potential at the targeted 17% idle reduction. Fleets who are starting at a higher idle baseline may have a more favorable payback.

Damman, Dennis

2005-10-31T23:59:59.000Z

430

Quantum Heat Bath  

E-Print Network (OSTI)

A model for a quantum heat bath is introduced. When the bath molecules have finitely many degrees of freedom, it is shown that the assumption that the molecules are weakly interacting is sufficient to enable one to derive the canonical distribution for the energy of a small system immersed in the bath. While the specific form of the bath temperature, for which we provide an explicit formula, depends on (i) spectral properties of the bath molecules, and (ii) the choice of probability measure on the state space of the bath, we are in all cases able to establish the existence of a strictly positive lower bound on the temperature of the bath. The results can be used to test the merits of different hypotheses for the equilibrium states of quantum systems. Two examples of physically plausible choices for the probability measure on the state space of a quantum heat bath are considered in detail, and the associated lower bounds on the temperature of the bath are worked out.

Dorje C. Brody; Lane P. Hughston

2014-11-17T23:59:59.000Z

431

association of companies and the Edison Electric Institute (1953). Their final report cites investigations from 1945 through 1953 and includes correlated information on coil data, heat  

E-Print Network (OSTI)

. The house has passive solar features consisting of south-facing glass with manually operable insulated to determine the heat pump capacity. The heating capacity of the heat pump in use is 34,100 Btu/hr (10 kw) at TEVAP = 35.6 F (2'C) and TCOND = 86.0 F (30°C). The cooling capacity of the heat pump was determined

Oak Ridge National Laboratory

432

Heat pump having improved defrost system  

DOE Patents (OSTI)

A heat pump system includes, in an operable relationship for transferring heat between an exterior atmosphere and an interior atmosphere via a fluid refrigerant: a compressor; an interior heat exchanger; an exterior heat exchanger; an accumulator; and means for heating the accumulator in order to defrost the exterior heat exchanger. 2 figs.

Chen, F.C.; Mei, V.C.; Murphy, R.W.

1998-12-08T23:59:59.000Z

433

Heat Pump Markets UK in Europe  

E-Print Network (OSTI)

Heat Pump Markets UK in Europe IEA Heat Pump Workshop 13. November 2012 Zoltan Karpathy #12;2 Excellence in Market Intelligence Agenda About BSRIA WMI UK in the European Heat Pump Market Heating BSRIA WMI UK in the European Heat Pump Market Heating Technologies in New and Existing Buildings Hybrid

Oak Ridge National Laboratory

434

Flow-induced vibration of component cooling water heat exchangers  

SciTech Connect

This paper presents an evaluation of flow-induced vibration problems of component cooling water heat exchangers in one of Taipower's nuclear power stations. Specifically, it describes flow-induced vibration phenomena, tests to identify the excitation mechanisms, measurement of response characteristics, analyses to predict tube response and wear, various design alterations, and modifications of the original design. Several unique features associated with the heat exchangers are demonstrated, including energy-trapping modes, existence of tube-support-plate (TSP)-inactive modes, and fluidelastic instability of TSP-active and -inactive modes. On the basis of this evaluation, the difficulties and future research needs for the evaluation of heat exchangers are identified. 11 refs., 19 figs., 3 tabs.

Yeh, Y.S.; Chen, S.S. (Taiwan Power Co., Taipei (Taiwan). Nuclear Engineering Dept.; Argonne National Lab., IL (USA))

1990-01-01T23:59:59.000Z

435

Near-field heat transfer between gold nanoparticle arrays  

SciTech Connect

The radiative heat transfer between gold nanoparticle layers is presented using the coupled dipole method. Gold nanoparticles are modelled as effective electric and magnetic dipoles interacting via electromagnetic fluctuations. The effect of higher-order multipoles is implemented in the expression of electric polarizability to calculate the interactions at short distances. Our findings show that the near-field radiation reduces as the radius of the nanoparticles is increased. Also, the magnetic dipole contribution to the heat exchange becomes more important for larger particles. When one layer is displayed in parallel with respect to the other layer, the near-field heat transfer exhibits oscillatory-like features due to the influence of the individual nanostructures. Further details about the effect of the nanoparticles size are also discussed.

Phan, Anh D., E-mail: anhphan@mail.usf.edu [Department of Physics, University of South Florida, Tampa, Florida 33620 (United States); Institute of Physics, Vietnam Academy of Science and Technology, 10 Dao Tan, Ba Dinh, Hanoi 10000 (Viet Nam); Phan, The-Long, E-mail: ptlong2512@yahoo.com [Department of Physics, Chungbuk National University, Cheongju 361-763 (Korea, Republic of); Woods, Lilia M. [Department of Physics, University of South Florida, Tampa, Florida 33620 (United States)

2013-12-07T23:59:59.000Z

436

ARM - 2012 AMS Presentations Featuring ARM Data  

NLE Websites -- All DOE Office Websites (Extended Search)

2 AMS Presentations Featuring ARM Data 2 AMS Presentations Featuring ARM Data Media Contact Lynne Roeder lynne-dot-roeder-at-pnnl-dot-gov @armnewsteam Field Notes Blog Topics Field Notes89 AGU 3 AMIE 10 ARM Aerial Facility 2 ARM Mobile Facility 1 6 ARM Mobile Facility 2 47 BAECC 1 BBOP 4 MAGIC 12 MC3E 17 SGP 2 STORMVEX 29 TCAP 3 Search News Search Blog News Center All Categories What's this? Social Media Guidance News Center All Categories Features and Releases Facility News Field Notes Blog feed Events feed Employment Research Highlights Data Announcements Education News Archive What's this? Social Media Guidance 2012 AMS Presentations Featuring ARM Data Monday, January 23 Presentation Type Session ID and Presentation Title Presenters Time and Location Oral Invited J2.1, Next-Generation Global Precipitation Data for Hydrometeorogical Applications Arthur Y. Hou, Dalia Bach Kirschbaum 11:00 AM, 256

437

LEDSGP/tools/features | Open Energy Information  

Open Energy Info (EERE)

LEDSGP/tools/features LEDSGP/tools/features < LEDSGP‎ | tools Jump to: navigation, search LEDSGP Logo.png Advancing climate-resilient low emission development around the world Home About Tools Expert Assistance Events Publications Join Us Tools Activities Inventory LEDS Toolkits Knowledge Portals Featured Tools Featured Tools The following resources can be used to support different stages of low emissions development planning. Click here to add a capacity building or training resource to the inventory. Webinar on Development Impact Assessment for Low Emissions Development: As part of this webinar, several members of the LEDS Global Partnership set out to review existing approaches to capturing and communicating development benefits of climate action and propose a new tool for communicating development benefits to policy makers as part of a LEDS

438

ARM - 2013 AMS Presentations Featuring ARM Data  

NLE Websites -- All DOE Office Websites (Extended Search)

3 AMS Presentations Featuring ARM Data 3 AMS Presentations Featuring ARM Data Media Contact Lynne Roeder lynne-dot-roeder-at-pnnl-dot-gov @armnewsteam Field Notes Blog Topics Field Notes89 AGU 3 AMIE 10 ARM Aerial Facility 2 ARM Mobile Facility 1 6 ARM Mobile Facility 2 47 BAECC 1 BBOP 4 MAGIC 12 MC3E 17 SGP 2 STORMVEX 29 TCAP 3 Search News Search Blog News Center All Categories What's this? Social Media Guidance News Center All Categories Features and Releases Facility News Field Notes Blog feed Events feed Employment Research Highlights Data Announcements Education News Archive What's this? Social Media Guidance 2013 AMS Presentations Featuring ARM Data Sunday, January 6 Presentation Type Session ID and Presentation Title Presenters Time and Location Poster Sessions Poster S150 Analysis of SPartiCus Data for Cirrus Modeling Case Studies R. L. Atlas, A. M. Fridlind and M. Diao 2:30-4:00 PM, Exhibit Hall 3

439

ARM - AGU Presentations Featuring ARM Data  

NLE Websites -- All DOE Office Websites (Extended Search)

CenterAGU Presentations Featuring ARM Data CenterAGU Presentations Featuring ARM Data Media Contact Lynne Roeder lynne-dot-roeder-at-pnnl-dot-gov @armnewsteam Field Notes Blog Topics Field Notes89 AGU 3 AMIE 10 ARM Aerial Facility 2 ARM Mobile Facility 1 6 ARM Mobile Facility 2 47 BAECC 1 BBOP 4 MAGIC 12 MC3E 17 SGP 2 STORMVEX 29 TCAP 3 Search News Search Blog News Center All Categories What's this? Social Media Guidance News Center All Categories Features and Releases Facility News Field Notes Blog feed Events feed Employment Research Highlights Data Announcements Education News Archive What's this? Social Media Guidance AGU Presentations Featuring ARM Data Monday, December 13 Presentation Type Session ID and Presentation Title Presenters Time and Location A11H. Atmospheric Sciences General Contributions: Clouds and Aerosol-Cloud Interactions I

440

News Releases & Features | Nuclear Science | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

News Releases SHARE News Releases and Features 1-2 of 2 Results U.S. Rep. Fleischmann touts ORNL as national energy treasure February 11, 2011 - OAK RIDGE, Tenn., Feb. 11, 2011 -...

Note: This page contains sample records for the topic "recs features heating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

ARM - Feature Stories and Releases Article  

NLE Websites -- All DOE Office Websites (Extended Search)

0, 2012 Feature Stories and Releases ARM Mobile Facility Completes Aerosol Campaign in India Bookmark and Share First-ever Indo-U.S. collaboration for climate research sets stage...

442

ARM - Feature Stories and Releases Article  

NLE Websites -- All DOE Office Websites (Extended Search)

4, 2007 Feature Stories and Releases Climate Scientists Air Their Views in Oklahoma Bookmark and Share Media and distinguished guests are invited to talk with top U.S. climate...

443

Feature identification framework and applications (FIFA)  

E-Print Network (OSTI)

collections that provides a general framework for applications while allowing decisions about the details of document representation and features identification to be deferred to domain specific implementations of that framework. These deferred decisions...

Audenaert, Michael Neal

2006-04-12T23:59:59.000Z

444

ARM - 2014 AMS Presentations Featuring ARM Data  

NLE Websites -- All DOE Office Websites (Extended Search)

4 AMS Presentations Featuring ARM Data Media Contact Rolanda Jundt rolanda-dot-jundt-at-pnnl-dot-gov @armnewsteam Field Notes Blog Topics Field Notes99 AGU 3 AMIE 10 ARM Aerial...

445

Hybrid Solutions to the Feature Interaction Problem  

E-Print Network (OSTI)

Calder,M. Kolberg,M. Magill,E. Marples,D. Reiff-Marganiec,S. Feature Interactions in Telecommunications and Software Systems VII pp 295-312 IOS Press

Calder, M.

446

ECG Feature Extraction Techniques - A Survey Approach  

E-Print Network (OSTI)

ECG Feature Extraction plays a significant role in diagnosing most of the cardiac diseases. One cardiac cycle in an ECG signal consists of the P-QRS-T waves. This feature extraction scheme determines the amplitudes and intervals in the ECG signal for subsequent analysis. The amplitudes and intervals value of P-QRS-T segment determines the functioning of heart of every human. Recently, numerous research and techniques have been developed for analyzing the ECG signal. The proposed schemes were mostly based on Fuzzy Logic Methods, Artificial Neural Networks (ANN), Genetic Algorithm (GA), Support Vector Machines (SVM), and other Signal Analysis techniques. All these techniques and algorithms have their advantages and limitations. This proposed paper discusses various techniques and transformations proposed earlier in literature for extracting feature from an ECG signal. In addition this paper also provides a comparative study of various methods proposed by researchers in extracting the feature from ECG signal.

Karpagachelvi, S; Sivakumar, M

2010-01-01T23:59:59.000Z

447

Radiant Heating Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Radiant Heating Basics Radiant Heating Basics Radiant Heating Basics August 19, 2013 - 10:33am Addthis Radiant heating systems involve supplying heat directly to the floor or to panels in the walls or ceiling of a house. The systems depend largely on radiant heat transfer: the delivery of heat directly from the hot surface to the people and objects in the room via the radiation of heat, which is also called infrared radiation. Radiant heating is the effect you feel when you can feel the warmth of a hot stovetop element from across the room. When radiant heating is located in the floor, it is often called radiant floor heating or simply floor heating. Despite the name, radiant floor heating systems also depend heavily on convection, the natural circulation of heat within a room, caused by heat rising from the floor. Radiant floor

448

Definition: District heat | Open Energy Information  

Open Energy Info (EERE)

District heat District heat Jump to: navigation, search Dictionary.png District heat A heating system that uses steam or hot water produced outside of a building (usually in a central plant) and piped into the building as an energy source for space heating, hot water or another end use.[1][2][3] View on Wikipedia Wikipedia Definition District heating (less commonly called teleheating) is a system for distributing heat generated in a centralized location for residential and commercial heating requirements such as space heating and water heating. The heat is often obtained from a cogeneration plant burning fossil fuels but increasingly biomass, although heat-only boiler stations, geothermal heating and central solar heating are also used, as well as nuclear power. District heating plants can provide higher efficiencies and better

449

Radiant Heating Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Radiant Heating Basics Radiant Heating Basics Radiant Heating Basics August 19, 2013 - 10:33am Addthis Radiant heating systems involve supplying heat directly to the floor or to panels in the walls or ceiling of a house. The systems depend largely on radiant heat transfer: the delivery of heat directly from the hot surface to the people and objects in the room via the radiation of heat, which is also called infrared radiation. Radiant heating is the effect you feel when you can feel the warmth of a hot stovetop element from across the room. When radiant heating is located in the floor, it is often called radiant floor heating or simply floor heating. Despite the name, radiant floor heating systems also depend heavily on convection, the natural circulation of heat within a room, caused by heat rising from the floor. Radiant floor

450

Feature selection for automatic solder joint inspection  

E-Print Network (OSTI)

FEATURE SELECTION FOR AUTOMATIC SOLDER JOINT INSPECTION A Thesis CHENG-CHENG LEE Submitted to the Graduate College of Texas AiVM University in partial fulfillment of the requirement for the degree of MASTER OF SCIENCE August 1987 Major... Subject: Mechanical Engineering FEATURE SELECTION FOR AUTOMATIC SOLDER JOINT INSPECTION A Thesis by CHENG-CHENG LEE Approved as to style and content by: Morris Driels (Chairman of Committee) Norman Gris ld (Member) i(?? Oren Xlasor'i (kfembef...

Lee, Cheng-Cheng

2012-06-07T23:59:59.000Z

451

FEMP--Solar Water Heating  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

More than 1 million homeowners and 200,000 busi- More than 1 million homeowners and 200,000 busi- nesses in the United States are using the sun to heat domestic water efficiently in almost any climate. In summer, a solar system properly sized for a resi- dential building can meet 100% of the building's water-heating needs in most parts of the country. In winter, the system might meet only half of this need, so another source of heat is used to back up the solar system. In either case, solar water heating helps to save energy, reduce utility costs, and preserve the environment. A solar water-heating system's performance depends primarily on the outdoor temperature, the temperature to which the water is heated, and the amount of sunlight striking the collector-the device that actually captures the sun's energy.

452

Water Heating | OpenEI  

Open Energy Info (EERE)

Water Heating Water Heating Dataset Summary Description Provides total and average household expenditures on energy for water heating in the United States in 2005. Source EIA Date Released September 01st, 2008 (6 years ago) Date Updated January 01st, 2009 (6 years ago) Keywords Energy Expenditures Residential Water Heating Data application/vnd.ms-excel icon 2005_Total.Expenditures.for_.Water_.Heating_EIA.Sep_.2008.xls (xls, 70.1 KiB) application/vnd.ms-excel icon 2005_Avg.Expenditures.for_.Water_.Heating_EIA.Sep_.2008.xls (xls, 69.1 KiB) Quality Metrics Level of Review Some Review Comment Temporal and Spatial Coverage Frequency Time Period 2005 License License Other or unspecified, see optional comment below Comment Rate this dataset Usefulness of the metadata Average vote Your vote

453

Consumer Winter Heating Oil Costs  

Gasoline and Diesel Fuel Update (EIA)

6 6 Notes: The outlook for heating oil costs this winter, due to high crude oil costs and tight heating oil supplies, breaks down to an expected increase in heating expenditures for a typical oil-heated household of more than $200 this winter, the result of an 18% increase in the average price and an 11% increase in consumption. The consumption increase is due to the colder than normal temperatures experienced so far this winter and our expectations of normal winter weather for the rest of this heating season. Last winter, Northeast heating oil (and diesel fuel) markets experienced an extremely sharp spike in prices when a severe weather situation developed in late January. It is virtually impossible to gauge the probability of a similar (or worse) price shock recurring this winter,

454

Topology-based Feature Definition and Analysis  

SciTech Connect

Defining high-level features, detecting them, tracking them and deriving quantities based on them is an integral aspect of modern data analysis and visualization. In combustion simulations, for example, burning regions, which are characterized by high fuel-consumption, are a possible feature of interest. Detecting these regions makes it possible to derive statistics about their size and track them over time. However, features of interest in scientific simulations are extremely varied, making it challenging to develop cross-domain feature definitions. Topology-based techniques offer an extremely flexible means for general feature definitions and have proven useful in a variety of scientific domains. This paper will provide a brief introduction into topological structures like the contour tree and Morse-Smale complex and show how to apply them to define features in different science domains such as combustion. The overall goal is to provide an overview of these powerful techniques and start a discussion how these techniques can aid in the analysis of astrophysical simulations.

Weber, Gunther H.; Bremer, Peer-Timo; Gyulassy, Attila; Pascucci, Valerio

2010-12-10T23:59:59.000Z

455

Spring 2014 Heat Transfer -2  

E-Print Network (OSTI)

Spring 2014 Heat Transfer - 2 A thin electronic chip is in the shape of a square wafer, b = 1 cm surface of the chip with a heat transfer coefficient of h = 100 W/m2 -K. Assume the chip has a uniform per side with a mass of m = 0.3 grams and specific heat of C = 103 J/kg-K. The chip is mounted

Virginia Tech

456

Energy-efficient water heating  

SciTech Connect

This fact sheet describes how to reduce the amount of hot water used in faucets and showers, automatic dishwashers, and washing machines; how to increase water-heating system efficiency by lowering the water heater thermostat, installing a timer and heat traps, and insulating hot water pipes and the storage tank; and how to use off-peak power to heat water. A resource list for further information is included.

NONE

1995-01-01T23:59:59.000Z

457

Frame Heat Transfer Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Developing Low-Conductance Window Frames: Capabilities and Developing Low-Conductance Window Frames: Capabilities and Limitations of Current Window Heat Transfer Design Tools Arild Gustavsen 1,* , Dariush Arasteh 2 , Bjørn Petter Jelle 3,4 , Charlie Curcija 5 and Christian Kohler 2 1 Department of Architectural Design, History and Technology, Norwegian University of Science and Technology, Alfred Getz vei 3, NO-7491 Trondheim, Norway 2 Windows and Daylighting Group, Lawrence Berkeley National Laboratory, 1 Cyclotron Road Mail Stop 90R3111, Berkeley, CA 94720- 8134, USA 3 Department of Civil and Transport Engineering, Norwegian University of Science and Technology, Høgskoleringen 7A, NO-7491 Trondheim, Norway 4 Department of Building Materials and Structures, SINTEF Building and Infrastructure, Høgskoleringen 7B,NO-7465 Trondheim, Norway

458

Heat flux solarimeter  

SciTech Connect

The solarimeter presented in this work is easy to assemble. It is calibrated and its performance is validated by means of Hottel's method. Finally, the curves obtained with this solarimeter are compared to the ones obtained with a commercial solarimeter. This device is based on the evaluation of the heat flow in a metal rod. In consequence, measurements are not affected by ambient temperature variations. On the other hand, there is a linear relationship between the temperatures measured at the rod ends and the incident radiation, as can be concluded both from the theory of its operation and the calibration lines obtained. The results obtained from the global irradiance measurements in the area of Los Polvorines (Buenos Aires Province), together with a preliminary evaluation of the solarimeter's response time, are presented in this work. (author)

Sartarelli, A.; Vera, S.; Cyrulies, E. [Instituto de Desarrollo Humano, Univ. Nac. de Gral. Sarmiento (IDH, UNGS), Los Polvorines (Argentina); Echarri, R. [Instituto de Desarrollo Humano, Univ. Nac. de Gral. Sarmiento (IDH, UNGS), Los Polvorines (Argentina); Consejo Nacional de Investigaciones Cientificas y Tecnicas (CONICET) (Argentina); Samson, I. [INTEC (Instituto Tecnologico Santo Domingo), Santo Domingo (Dominican Republic)

2010-12-15T23:59:59.000Z

459

Cooling by heating  

E-Print Network (OSTI)

We introduce the idea of actually cooling quantum systems by means of incoherent thermal light, hence giving rise to a counter-intuitive mechanism of "cooling by heating". In this effect, the mere incoherent occupation of a quantum mechanical mode serves as a trigger to enhance the coupling between other modes. This notion of effectively rendering states more coherent by driving with incoherent thermal quantum noise is applied here to the opto-mechanical setting, where this effect occurs most naturally. We discuss two ways of describing this situation, one of them making use of stochastic sampling of Gaussian quantum states with respect to stationary classical stochastic processes. The potential of experimentally demonstrating this counter-intuitive effect in opto-mechanical systems with present technology is sketched.

A. Mari; J. Eisert

2011-04-01T23:59:59.000Z

460

Heating oils, 1982  

SciTech Connect

Properties of 235 heating oils marketed in the United States were submitted for study and compilation under agreement between BETC and API. The fuels were manufactured by 25 petroleum refining companies in 88 domestic refineries. The data are tabulated according to six grades of fuel and subdivided into five geographic regions in which the fuels are marketed. The five regions containing a total of 16 marketing districts are shown on a map in the report. Trend charts are included showing average properties of the six grades of fuel for the past several years. Summaries of the results of the tests by grade and by region for 1982 compared with data for 1981 are tabulated. Analyses of grade 6 foreign import oils are presented.

Shelton, E.M.

1982-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "recs features heating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Heating oils, 1980  

SciTech Connect

Properties of 247 heating oils marketed in the United States were submitted for study and compilation under agreement between the Bartlesville Energy Technology Center and the American Petroleum Institute. The fuels were manufactured by 26 petroleum refining companies in 87 domestic refineries. The data are tabulated according to six grades of fuel and subdivided into five geographic regions in which the fuels are marketed. The six grades of fuel are defined by the American Society for Testing and Materials Specification D396. The five regions containing a total of 16 marketing districts are shown on a map in the report. Trend charts are included showing average properties of the six grades of fuel for the past several years. Summaries of the results of the tests by grade and by region for 1980 compared with data for 1979 are shown in tables. Analyses of grades 2, 5(light), and 6 foreign import oils are presented.

Shelton, E.M.

1980-10-01T23:59:59.000Z

462

Heating oils, 1983  

SciTech Connect

Properties of 195 heating oils marketed in the United States were submitted for study and compilation under agreement between the Bartlesville Energy Technology Center (BETC) and the American Petroleum Institute (API). The fuels were manufactured by 25 petroleum refining companies in 83 domestic refineries. The data are tabulated according to six grades of fuel and subdivided into five geographic regions in which the fuels are marketed. The six grades of fuels are defined by the American Society for Testing and Materials (ASTM) Specification D396. The five regions containing a total of 16 marketing districts are shown on a map in the report. Trend charts are included showing average properties of the six grades of fuel for the past several years. Summaries of the results of the tests by grade and by region for 1983 are compared with data for 1982. 7 figures, 12 tables.

Shelton, E.M.

1983-08-01T23:59:59.000Z

463

Heating oils, 1981  

SciTech Connect

Properties of 249 heating oils marketed in the United States were submitted for study and compilation under agreement between the Bartlesville Energy Technology Center (BETC) and the American Petroleum Institute (API). The fuels were manufactured by 28 petroleum refining companies in 92 domestic refineries. The data are tabulated according to six grades of fuel and subdivided into five geographic regions in which the fuels are marketed. The six grades of fuels are defined by the American Society for Testing and Materials (ASTM) Specification D396. The five regions containing a total of 16 marketing districts are shown on a map in the report. Trend charts are included showing average properties of the six grades of fuel for the past several years. Summaries of the results of the tests by grade and by region for 1981 compared with data for 1980 are shown in Tables 1 through 6. Analyses of grade 6 foreign import oils are presented in Table 13.

Shelton, E.M.

1981-08-01T23:59:59.000Z

464

Ceramic heat exchanger  

DOE Patents (OSTI)

A tube containment system is disclosed. The tube containment system does not significantly reduce heat transfer through the tube wall. The contained tube is internally pressurized, and is formed from a ceramic material having high strength, high thermal conductivity, and good thermal shock resistance. The tube containment system includes at least one ceramic fiber braid material disposed about the internally pressurized tube. The material is disposed about the tube in a predetermined axial spacing arrangement. The ceramic fiber braid is present in an amount sufficient to contain the tube if the tube becomes fractured. The tube containment system can also include a plurality of ceramic ring-shaped structures, in contact with the outer surface of the tube, and positioned between the tube and the ceramic fiber braid material, and/or at least one transducer positioned within tube for reducing the internal volume and, therefore, the energy of any shrapnel resulting from a tube fracture. 6 figs.

LaHaye, P.G.; Rahman, F.H.; Lebeau, T.P.; Severin, B.K.

1998-06-16T23:59:59.000Z

465

Ceramic heat exchanger  

DOE Patents (OSTI)

A tube containment system. The tube containment system does not significantly reduce heat transfer through the tube wall. The contained tube is internally pressurized, and is formed from a ceramic material having high strength, high thermal conductivity, and good thermal shock resistance. The tube containment system includes at least one ceramic fiber braid material disposed about the internally pressurized tube. The material is disposed about the tube in a predetermined axial spacing arrangement. The ceramic fiber braid is present in an amount sufficient to contain the tube if the tube becomes fractured. The tube containment system can also include a plurality of ceramic ring-shaped structures, in contact with the outer surface of the tube, and positioned between the tube and the ceramic fiber braid material, and/or at least one transducer positioned within tube for reducing the internal volume and, therefore, the energy of any shrapnel resulting from a tube fracture.

LaHaye, Paul G. (Kennebunk, ME); Rahman, Faress H. (Portland, ME); Lebeau, Thomas P. E. (Portland, ME); Severin, Barbara K. (Biddeford, ME)

1998-01-01T23:59:59.000Z

466

Holographic Heat Engines  

E-Print Network (OSTI)

It is shown that in theories of gravity where the cosmological constant is considered a thermodynamic variable, it is natural to use black holes as heat engines. Two examples are presented in detail using AdS charged black holes as the working substance. We notice that for static black holes, the maximally efficient traditional Carnot engine is also a Stirling engine. The case of negative cosmological constant supplies a natural realization of these engines in terms of the field theory description of the fluids to which they are holographically dual. We first propose a precise picture of how the traditional thermodynamic dictionary of holography is extended when the cosmological constant is dynamical and then conjecture that the engine cycles can be performed by using renormalization group flow. We speculate about the existence of a natural dual field theory counterpart to the gravitational thermodynamic volume.

Clifford V. Johnson

2014-09-04T23:59:59.000Z

467

Total Space Heat-  

Gasoline and Diesel Fuel Update (EIA)

Revised: December, 2008 Revised: December, 2008 Total Space Heat- ing Cool- ing Venti- lation Water Heat- ing Light- ing Cook- ing Refrig- eration Office Equip- ment Com- puters Other All Buildings ............................. 91.0 33.0 7.2 6.1 7.0 18.7 2.7 5.3 1.0 2.2 7.9 Building Floorspace (Square Feet) 1,001 to 5,000 ........................... 99.0 30.7 6.7 2.7 7.1 13.9 7.1 19.9 1.1 1.7 8.2 5,001 to 10,000 .......................... 80.0 30.1 5.5 2.6 6.1 13.6 5.2 8.2 0.8 1.4 6.6 10,001 to 25,000 ........................ 71.0 28.2 4.5 4.1 4.1 14.5 2.3 4.5 0.8 1.6 6.5 25,001 to 50,000 ........................ 79.0 29.9 6.8 5.9 6.3 14.9 1.7 3.9 0.8 1.8 7.1 50,001 to 100,000 ...................... 88.7 31.6 7.6 7.6 6.5 19.6 1.7 3.4 0.7 2.0 8.1 100,001 to 200,000 .................... 104.2 39.1 8.2 8.9 7.9 22.9 1.1 2.9 Q 3.2 8.7 200,001 to 500,000 ....................

468

Total Space Heat-  

Gasoline and Diesel Fuel Update (EIA)

Revised: December, 2008 Revised: December, 2008 Total Space Heat- ing Cool- ing Venti- lation Water Heat- ing Light- ing Cook- ing Refrig- eration Office Equip- ment Com- puters Other All Buildings ............................. 91.0 33.0 7.2 6.1 7.0 18.7 2.7 5.3 1.0 2.2 7.9 Building Floorspace (Square Feet) 1,001 to 5,000 ........................... 99.0 30.7 6.7 2.7 7.1 13.9 7.1 19.9 1.1 1.7 8.2 5,001 to 10,000 .......................... 80.0 30.1 5.5 2.6 6.1 13.6 5.2 8.2 0.8 1.4 6.6 10,001 to 25,000 ........................ 71.0 28.2 4.5 4.1 4.1 14.5 2.3 4.5 0.8 1.6 6.5 25,001 to 50,000 ........................ 79.0 29.9 6.8 5.9 6.3 14.9 1.7 3.9 0.8 1.8 7.1 50,001 to 100,000 ...................... 88.7 31.6 7.6 7.6 6.5 19.6 1.7 3.4 0.7 2.0 8.1 100,001 to 200,000 .................... 104.2 39.1 8.2 8.9 7.9 22.9 1.1 2.9 Q 3.2 8.7 200,001 to 500,000 ....................

469

Heating Degree Days  

U.S. Energy Information Administration (EIA) Indexed Site

Heating Degree Days Heating Degree Days New England ................ 2,626 737 115 2,062 3,105 849 159 2,247 3,184 872 136 2,180 5,541 6,359 6,373 Middle Atlantic .............. 2,326 576 85 1,899 2,906 672 123 2,041 2,924 682 90 1,986 4,886 5,742 5,682 E. N. Central ................. 2,440 621 139 2,150 3,279 772 119 2,343 3,141 726 129 2,230 5,350 6,514 6,227 W. N. Central ................ 2,515 520 143 2,360 3,424 908 103 2,541 3,216 677 152 2,404 5,539 6,976 6,450 South Atlantic ............... 1,129 168 16 992 1,513 217 21 1,059 1,466 202 16 1,010 2,306 2,809 2,695 E. S. Central ................. 1,361 180 28 1,326 1,939 289 16 1,430 1,839 245 23 1,336 2,896 3,675 3,443 W. S. Central ................ 913 38 3 729 1,189 141 2 909 1,150 83 5 821 1,682 2,239 2,060 Mountain ....................... 2,063 542 98 1,741 2,430 689 101 1,885 2,189 642 130 1,817 4,444

470

Heat pumps | Open Energy Information  

Open Energy Info (EERE)

pumps Jump to: navigation, search TODO: Add description List of Heat pumps Incentives Retrieved from "http:en.openei.orgwindex.php?titleHeatpumps&oldid26717...

471

Second look at pool heating  

SciTech Connect

The market for solar heating systems for swimming pools is discussed. The reasons for the decline in the sales of these systems are described.

Best, D.

1983-11-01T23:59:59.000Z

472

Accelerating Combined Heat & Power Deployment  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ACCELERATING COMBINED HEAT & POWER DEPLOYMENT An Industry Consultation by the United States Energy Association August 31, 2011 Cover Photograph: CHP Plant at the Mueller Energy...

473

Geothermal Heat Pumps- Cooling Mode  

Energy.gov (U.S. Department of Energy (DOE))

In summer, the fluid removes heat from the building and transfers it to the relatively cooler ground in order to cool the building.

474

Heat Kernel Based Community Detection  

E-Print Network (OSTI)

Heat Kernel Based. Community Detection. Kyle Kloster. Purdue University. Joint with. David F. Gleich,. (Purdue), supported by. NSF CAREER. 1149756-CCF...

2014-09-16T23:59:59.000Z

475

Building Technologies Office: Water Heating Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Water Heating Research Water Heating Research to someone by E-mail Share Building Technologies Office: Water Heating Research on Facebook Tweet about Building Technologies Office: Water Heating Research on Twitter Bookmark Building Technologies Office: Water Heating Research on Google Bookmark Building Technologies Office: Water Heating Research on Delicious Rank Building Technologies Office: Water Heating Research on Digg Find More places to share Building Technologies Office: Water Heating Research on AddThis.com... About Take Action to Save Energy Partner with DOE Activities Appliances Research Building Envelope Research Windows, Skylights, & Doors Research Space Heating & Cooling Research Water Heating Research Lighting Research Sensors & Controls Research Energy Efficient Buildings Hub

476

Effect of heat treatment and heat-to-heat variations in the fatigue-crack growth response of Alloy 718  

SciTech Connect

The fatigue-crack growth behavior of seven heats of Alloy 718 was studied at five different test temperatures. These seven heats represented at least four different producers, four different product forms, two melt practices, and most of the heat were tested in two different heat-treated conditions. Heat-to-heat variations were noted; these were most obvious in material given the conventional heat-treatment. 8 figs., 5 tabs.

James, L.A.; Mills, W.J.

1980-04-01T23:59:59.000Z

477

Heat Transfer Characteristics of a Generalized Divided Flow Heat Exchanger  

E-Print Network (OSTI)

The concept of a "Divided-flow" heat exchanger is generalized by locating the shell inlet (or outlet) nozzle off-center such that the two shell sub-streams are unequal and traverse unequal flow paths. The governing equations for heat transfer...

Singh, K. P.

1979-01-01T23:59:59.000Z

478

Urban Sewage Delivery Heat Transfer System (2): Heat Transfer  

E-Print Network (OSTI)

The thimble delivery heat-transfer (TDHT) system is one of the primary modes to utilize the energy of urban sewage. Using the efficiency-number of transfer units method ( ), the heat-transfer efficiencies of the parallel-flow and reverse-flow TDTH...

Zhang, C.; Wu, R.; Li, X.; Li, G.; Zhuang, Z.; Sun, D.

2006-01-01T23:59:59.000Z

479

Design of Heat Exchanger for Heat Recovery in CHP Systems  

E-Print Network (OSTI)

The objective of this research is to review issues related to the design of heat recovery unit in Combined Heat and Power (CHP) systems. To meet specific needs of CHP systems, configurations can be altered to affect different factors of the design...

Kozman, T. A.; Kaur, B.; Lee, J.

480

1203recs_rev3.dvi  

NLE Websites -- All DOE Office Websites (Extended Search)

of of the Brookhaven AGS-RHIC Program Advisory Committee 5-6 December 2003 1 Executive Summary This PAC meeting differed from the typical meeting of the committee in several important ways. The goals of this meeting were two fold, first to evaluate the scientific progress and status of the RHIC program, and, second, to evaluate the appropriateness and promise of the laboratory's decadal plan for the future of the RHIC program. In a typical past meeting the committee evaluated specific proposals for experiments or specific proposals for the disposition of the next RHIC runs - that is to say, the energies and species of the colliding particles. It is no exaggeration to say that the early RHIC physics program has been success- ful beyond reasonable expectations. The accelerator has achieved half the design luminosity for Au+Au, d+Au, and less, but still a good start for p+p, a remarkable achievement

Note: This page contains sample records for the topic "recs features heating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

OSU REC RFP #B13637407P  

NLE Websites -- All DOE Office Websites (Extended Search)

OREGON STATE UNIVERSITY OREGON STATE UNIVERSITY REQUEST FOR PROPOSAL RFP #B13637407P Renewable Energy Credits PROCUREMENT ANALYST: Bonnie Tufts FAX: (541) 737- 2170 Email: Bonnie.Tufts@oregonstate.edu ISSUE DATE: September 17, 2007 PROPOSAL DUE DATE AND TIME: October 12, 2007 @ 3:00PM NO LATE PROPOSALS WILL BE ACCEPTED Web Viewers Note: There may be attachments to this RFP that are not available via the webpage. Contact the procurement analyst listed above to obtain any attachments. RFP SUBMITTAL LOCATION Oregon State University Procurement & Contract Services Attn: Bonnie Tufts 644 SW 13th Street Corvallis, Oregon 97333-4238 2 SCHEDULE OF EVENTS RFP Released:.................................. September 17, 2007 Deadline for Requests for

482

Attn: FAXNAME, SHORT, Fax No. FAXNO [#REC  

E-Print Network (OSTI)

was referred to parliament's permanent Committee on Education, Research and Technology Assessment when a recommendation will be made. The area suggested was home to the former Greifswald nuclear power within the country to ensure the continued promotion of German technical and scientific academic

483

1990 RECS Public Use Microdata Files  

Gasoline and Diesel Fuel Update (EIA)

1: Structural Characteristics of the Dwelling text.gif cvs file File 2: Floorspace Measurement Variables text file cvs file File 3: Equipment Variables text file cvs file File 4:...

484

Flow and heat transfer in porous micro heat sink for thermal management of high power LEDs  

Science Journals Connector (OSTI)

A novel porous micro heat sink system is presented for thermal management of high power LEDs, which has high heat transport capability. The operational principle and heat transfer characteristics of porous micro heat sink are analyzed. Numerical model ... Keywords: Heat dissipation, High heat flux, High power LEDs, Porous media, Porous micro heat sink

Z. M. Wan; J. Liu; K. L. Su; X. H. Hu; S. S. M

2011-05-01T23:59:59.000Z

485

Heat Pump Water Heaters | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Water Heaters Water Heaters Heat Pump Water Heaters May 4, 2012 - 5:21pm Addthis A diagram of a heat pump water heater. A diagram of a heat pump water heater. What does this mean for me? Heat pump water heaters can be two to three times more energy efficient than conventional electric storage water heaters. Heat pump water heaters work in locations that remain in the 40º-90ºF range year-round. Most homeowners who have heat pumps use them to heat and cool their homes. But a heat pump also can be used to heat water -- either as stand-alone water heating system, or as combination water heating and space conditioning system. How They Work Heat pump water heaters use electricity to move heat from one place to another instead of generating heat directly. Therefore, they can be two to

486

Doppler-Broadened Spectral Emission from the Turbulently Heated Plasma of Burnout V  

Science Journals Connector (OSTI)

In an efficient ion heating mode recently discovered in the Burnout-V turbulent-heating experiment, the line profiles of emission spectra exhibit three noteworthy features: (1) a marked Doppler broadening (full width at half-maximum ?10 ) of the Balmer lines, (2) a "red"/"blue" asymmetry dependent on the geometry of the plasma container, and (3) non-Gaussian line shapes near the central wavelengths.

I. Alexeff; G. E. Guest; J. R. McNally; Jr.; R. V. Neidigh; F. R. Scott

1969-08-11T23:59:59.000Z

487

The impact of TXV heating on the performance of air-source heat pump in heating mode  

SciTech Connect

The paper discusses the strategy of TXV heating, which adds a limited amount of heat on the surface of TXV sensor, to achieve energy saving and low cost in air-source heat pumps. The TXV heating is able to retard the valve closing so as to boost energy saving in heating mode. The testing results demonstrate the appropriate TXV heating achieves a remarkable improvement in COP and thermal comfort. The required heating power is not more than 40w. The additional equipment cost of TXV heating is less than $20. Thus, the strategy of TXV heating is practical from the view of technology and economy.

Gao, Zhiming [ORNL

2010-01-01T23:59:59.000Z

488

Heat reclaiming method and apparatus  

DOE Patents (OSTI)

Method and apparatus to extract heat by transferring heat from hot compressed refrigerant to a coolant, such as water, without exceeding preselected temperatures in the coolant and avoiding boiling in a water system by removing the coolant from direct or indirect contact with the hot refrigerant.

Jardine, Douglas M. (Colorado Springs, CO)

1984-01-01T23:59:59.000Z

489

Earth's Crust: Heat Flow Relationships  

Science Journals Connector (OSTI)

... of heat flow through the Earth's surface at any point requires two measurements, the geothermal gradient itself and the thermal conductivity of the adjacent rocks. In the oceanic crust, ... variations in heat flow from point to point are governed essentially by variations in the geothermal gradient. In continents, however, the story is different. Correlation and regression analyses carried ...

Our Geomagnetism Correspondent

1970-07-11T23:59:59.000Z

490

Passive solar heating and analysis  

SciTech Connect

Passive solar heating experience and analysis techniques are reviewed with emphasis on annual auxiliary heat requirement. The role of analysis in the design of passive solar buildings is discussed. Selected results for existing systems are presented for locations in Saudi Arabia and climatically similar locations in the US. Advanced systems in the research stage are described.

Jones, R.W.

1984-01-01T23:59:59.000Z

491

Heat Pump Market in Thailand  

Science Journals Connector (OSTI)

The value of hot water system in Thailand, rarely mentioned or quantified, is almost 3,000 million Baht per year. The heat pump is an option of hot water system. The development of heat pump in Thailand is officially started in 2002 according to the program of subsidy for heat pump but before that there was some slow development. Comparing to the cost of hot water production from instantaneous system, local manufactured heat pump is commercial viable even without the subsidy. The imported heat pump compared to local production can be sold to only high end user or high awareness of energy. The important factor of heat pump development is depended on the selling price, performance, and the customer behavior. The highest efficiency may not be the winner in Thai market as the drivers for higher efficiency or co-efficiency of performance of heat pump is not so strong compared to the price. Some of information in this paper cannot be supported by the real data because of the brand name of heat pump cannot be published.

Kuaanan Techato

2012-01-01T23:59:59.000Z

492

An experimental study on heat transfer from a horizontal heated circular cylinder enhanced by water spray.  

E-Print Network (OSTI)

??A series of experiments were conducted to investigate the heat transfer which occurs with a heated, constant heat flux, horizontal, single circular cylinder is exposed (more)

Chau, Man Hei

2009-01-01T23:59:59.000Z

493

Consumer Winter Heating Oil Costs  

Gasoline and Diesel Fuel Update (EIA)

5 5 Notes: Using the Northeast as a regional focus for heating oil, the typical oil-heated household consumes about 680 gallons of oil during the winter, assuming that weather is "normal." The previous three winters were warmer than average and generated below normal consumption rates. Last winter, consumers saw large increases over the very low heating oil prices seen during the winter of 1998-1999 but, outside of the cold period in late January/early February they saw relatively low consumption rates due to generally warm weather. Even without particularly sharp cold weather events this winter, we think consumers are likely to see higher average heating oil prices than were seen last winter. If weather is normal, our projections imply New England heating oil

494

heat pump | OpenEI  

Open Energy Info (EERE)

heat pump heat pump Dataset Summary Description View 2010 energy efficiency data from AeroSys Inc, Coaire, Cold Point, First Operations, LG Electronics, Nordyne, and Quietside manufacturers. Data includes cooling capacity, cooling performance, heating capacity, and heating performance. Spreadsheet was created by combining the tables in pdf files that are included in the zip file. Source Energy Applicance Data - United States Federal Trade Commission, www.ftc.gov Date Released Unknown Date Updated Unknown Keywords air conditioner central air conditioner efficiency efficient energy heat pump Data application/vnd.ms-excel icon 2010_CentralAC_All.xls (xls, 82.4 KiB) application/zip icon 2010CentralAirConditioner.zip (zip, 398.2 KiB) Quality Metrics Level of Review Some Review

495

Northeast Home Heating Oil Reserve  

Gasoline and Diesel Fuel Update (EIA)

Northeast Home Heating Oil Reserve Northeast Home Heating Oil Reserve Information on the Northeast Home Heating Oil Reserve is available from the U.S. Department of Energy (DOE) Office of Petroleum Reserves web site at http://www.fossil.energy.gov/programs/reserves/heatingoil/. Northeast Home Heating Oil Reserve (NEHHOR) inventories now classified as ultra-low sulfur distillate (15 parts per million) are not considered to be in the commercial sector and therefore are excluded from distillate fuel oil supply and disposition statistics in Energy Information Administration publications, such as the Weekly Petroleum Status Report, Petroleum Supply Monthly, and This Week In Petroleum. Northeast Home Heating Oil Reserve Terminal Operator Location (Thousand Barrels) Hess Corp. Groton, CT 500*

496

Regional Residential Heating Oil Prices  

Gasoline and Diesel Fuel Update (EIA)

One of the first places where consumers are feeling the impact of One of the first places where consumers are feeling the impact of this winter's market pressures is in home heating oil prices. This chart shows prices through February 28, the most recent EIA data available. The general level of heating oil prices each year is largely a function of crude oil prices, and the price range over the course of the heating season is typically about 10 cents per gallon. Exceptions occur in unusual circumstances, such as very cold weather, large changes in crude oil prices, or supply problems. Heating oil prices for East Coast consumers started this winter at just over $1 per gallon, but rising crude oil prices drove them up nearly 21 cents through mid-January. With the continuing upward pressure from crude oil markets, magnified by a regional shortfall of heating oil

497

Winter Residential Heating Oil Prices  

Gasoline and Diesel Fuel Update (EIA)

7 7 Notes: Residential heating oil prices reflect a similar pattern to that shown in spot prices. However, like other retail petroleum prices, they tend to lag changes in wholesale prices in both directions, with the result that they don't rise as rapidly or as much, but they take longer to recede. This chart shows the residential heating oil prices collected under the State Heating Oil and Propane Program (SHOPP), which only runs during the heating season, from October through March. The spike in New York Harbor spot prices last winter carried through to residential prices throughout New England and the Central Atlantic states. Though the spike actually lasted only a few weeks, residential prices ended the heating season well above where they had started.

498

Minimal universal quantum heat machine  

E-Print Network (OSTI)

In traditional thermodynamics the Carnot cycle yields the ideal performance bound of heat engines and refrigerators. We propose and analyze a minimal model of a heat machine that can play a similar role in quantum regimes. The minimal model consists of a single two-level system with periodically modulated energy splitting that is permanently, weakly, coupled to two spectrally-separated heat baths at different temperatures. The equation of motion allows to compute the stationary power and heat currents in the machine consistently with the second-law of thermodynamics. This dual-purpose machine can act as either an engine or a refrigerator (heat pump) depending on the modulation rate. In both modes of operation the maximal Carnot efficiency is reached at zero power. We study the conditions for finite-time optimal performance for several variants of the model. Possible realizations of the model are discussed.

David Gelbwaser-Klimovsky; Robert Alicki; Gershon Kurizki

2012-09-06T23:59:59.000Z

499

Critical heat flux test apparatus  

DOE Patents (OSTI)

An apparatus for testing, in situ, highly irradiated specimens at high temperature transients is provided. A specimen, which has a thermocouple device attached thereto, is manipulated into test position in a sealed quartz heating tube by a robot. An induction coil around a heating portion of the tube is powered by a radio frequency generator to heat the specimen. Sensors are connected to monitor the temperatures of the specimen and the induction coil. A quench chamber is located below the heating portion to permit rapid cooling of the specimen which is moved into this quench chamber once it is heated to a critical temperature. A vacuum pump is connected to the apparatus to collect any released fission gases which are analyzed at a remote location.

Welsh, Robert E. (West Mifflin, PA); Doman, Marvin J. (McKeesport, PA); Wilson, Edward C. (West Mifflin, PA)

1992-01-01T23:59:59.000Z

500

Satellite stories featured in Lab lecture series  

NLE Websites -- All DOE Office Websites (Extended Search)

February » February » Satellite stories featured Satellite stories featured in Lab lecture series Space adventures will be featured in the upcoming Frontiers in Science lecture series "Small Satellites on a Shoestring: The LANL Experience." February 14, 2008 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials.