National Library of Energy BETA

Sample records for recov ery point

  1. Microsoft PowerPoint - lndustry Issues and Perspectives _ Eris Speights [Compatibility Mode]

    National Nuclear Security Administration (NNSA)

    Industry Issues and Perspectives Eris Speights @ Westinghouse Nuclear  Question regarding the shipment of irradiated reactor fuel: 2  BR-0006  2.1 In the case of spent fuel shipments, in accordance with 10 CFR 73.37, "Requirements for Physical Protection of Irradiated Reactor Fuel in Transit," the date of shipment is Safeguards Information until 10 days after the shipment or the last shipment in a series of shipments is received. Therefore, DOE/NRC Form 741 should be

  2. Lake Erie Alternative Power | Open Energy Information

    Open Energy Info (EERE)

    Power Jump to: navigation, search Name Lake Erie Alternative Power Facility Lake Erie Alternative Power Sector Wind energy Facility Type Offshore Wind Facility Status Proposed...

  3. HERO BX formerly Lake Erie Biofuels | Open Energy Information

    Open Energy Info (EERE)

    HERO BX formerly Lake Erie Biofuels Jump to: navigation, search Name: HERO BX (formerly Lake Erie Biofuels) Place: Erie, Pennsylvania Product: Pennsylvania-based project developer...

  4. METHANE AND NITROGEN ABUNDANCES ON PLUTO AND ERIS

    SciTech Connect (OSTI)

    Tegler, S. C.; Cornelison, D. M.; Abernathy, M. R.; Bovyn, M. J.; Burt, J. A.; Evans, D. E.; Maleszewski, C. K.; Thompson, Z.; Grundy, W. M.; Romanishin, W.; Vilas, F. E-mail: David.Cornelison@nau.ed E-mail: wjr@nhn.ou.ed

    2010-12-10

    We present spectra of Eris from the MMT 6.5 m Telescope and Red Channel Spectrograph (5700-9800 A, 5 A pixel{sup -1}) on Mt. Hopkins, AZ, and of Pluto from the Steward Observatory 2.3 m Telescope and Boller and Chivens Spectrograph (7100-9400 A, 2 A pixel{sup -1}) on Kitt Peak, AZ. In addition, we present laboratory transmission spectra of methane-nitrogen and methane-argon ice mixtures. By anchoring our analysis in methane and nitrogen solubilities in one another as expressed in the phase diagram of Prokhvatilov and Yantsevich, and comparing methane bands in our Eris and Pluto spectra and methane bands in our laboratory spectra of methane and nitrogen ice mixtures, we find Eris' bulk methane and nitrogen abundances are {approx}10% and {approx}90% and Pluto's bulk methane and nitrogen abundances are {approx}3% and {approx}97%. Such abundances for Pluto are consistent with values reported in the literature. It appears that the bulk volatile composition of Eris is similar to the bulk volatile composition of Pluto. Both objects appear to be dominated by nitrogen ice. Our analysis also suggests, unlike previous work reported in the literature, that the methane and nitrogen stoichiometry is constant with depth into the surface of Eris. Finally, we point out that our Eris spectrum is also consistent with a laboratory ice mixture consisting of 40% methane and 60% argon. Although we cannot rule out an argon-rich surface, it seems more likely that nitrogen is the dominant species on Eris because the nitrogen ice 2.15 {mu}m band is seen in spectra of Pluto and Triton.

  5. Lake Erie Connector Project Environmental Assessment Draft

    Energy Savers [EERE]

    ... Although there are several natural gas production areas ... Sewer and Wastewater Treatment The Erie City Sewer ... (PAHs) from the diesel exhaust of locomotives, and metals ...

  6. EA-2019: Lake Erie Connector Project

    Broader source: Energy.gov [DOE]

    DOE is preparing an EA that evaluates the potential environmental impacts of issuing a Presidential permit for a new, 72-mile long, 1,000 megawatt, high-voltage direct current, electric transmission system that would cross the international border with Canada in Lake Erie and connect to the proposed Erie Converter Station in Conneaut Township, Pennsylvania. Additional information is available on the project website: http://www.lakeerieconnectorea.com.

  7. Lake Erie Connector Project Environmental Assessment Draft

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Volume 1 - Main Document U.S. Department of Energy Office of Electricity Delivery and Energy Reliability Washington DC June 2016 Cover Photo Credits http://www.itclakeerieconnector.com/ DRAFT LAKE ERIE CONNECTOR PROJECT ENVIRONMENTAL ASSESSMENT Volume 1-Main Document DOE/EA-2019 U.S. DEPARTMENT OF ENERGY OFFICE OF ELECTRICITY DELIVERY AND ENERGY RELIABILITY COOPERATING AGENCY U.S. ARMY CORPS OF ENGINEERS This Page Intentionally Left Blank Lake Erie Connector Project Draft Environmental

  8. EA-2045: LAKE ERIE ENERGY DEVELOPMENT CORPORATION’S PROJECT ICEBREAKER, AN OFFSHORE WIND ADVANCED TECHNOLOGY DEMONSTRATION PROJECT, OFFSHORE CLEVELAND, OHIO IN LAKE ERIE.

    Broader source: Energy.gov [DOE]

    Lake Erie Energy Development Corporation’s Project Icebreaker, an offshore wind advanced technology demonstration project, offshore Cleveland, Ohio in Lake Erie

  9. Microsoft PowerPoint - lndustry Issues and Perspectives _ Eris...

    National Nuclear Security Administration (NNSA)

    reactor fuel: 2 BR-0006 2.1 In the case of spent fuel shipments, in accordance with 10 CFR 73.37, "Requirements for Physical Protection of Irradiated Reactor Fuel in ...

  10. PROCESS OF RECOVERING URANIUM

    DOE Patents [OSTI]

    Carter, J.M.; Larson, C.E.

    1958-10-01

    A process is presented for recovering uranium values from calutron deposits. The process consists in treating such deposits to produce an oxidlzed acidic solution containing uranium together with the following imparities: Cu, Fe, Cr, Ni, Mn, Zn. The uranium is recovered from such an impurity-bearing solution by adjusting the pH of the solution to the range 1.5 to 3.0 and then treating the solution with hydrogen peroxide. This results in the precipitation of uranium peroxide which is substantially free of the metal impurities in the solution. The peroxide precipitate is then separated from the solution, washed, and calcined to produce uranium trioxide.

  11. Erie County, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    52757,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":"" Hide Map This article is a stub. You can help OpenEI by expanding it. Erie County is a county...

  12. Erie County, New York: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Places in Erie County, New York Akron, New York Alden, New York Amherst, New York Angola on the Lake, New York Angola, New York Billington Heights, New York Blasdell, New York...

  13. Lake Erie Connector Project Envrionmental Assessment Appendix Draft

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Volume II-Appendices U.S. Department of Energy Office of Electricity Delivery and Energy Reliability Washington DC June 2016 Cover Photo Credits http://www.itclakeerieconnector.com/ DRAFT LAKE ERIE CONNECTOR PROJECT ENVIRONMENTAL ASSESSMENT Volume II Appendices DOE/EA-2019 U.S. DEPARTMENT OF ENERGY OFFICE OF ELECTRICITY DELIVERY AND ENERGY RELIABILITY COOPERATING AGENCY U.S. ARMY CORPS OF ENGINEERS This Page Intentionally Left Blank Lake Erie Connector Project Draft Environmental Assessment

  14. METHOD OF RECOVERING THORIUM

    DOE Patents [OSTI]

    Fisher, R.W.

    1957-12-10

    A method is described for recovering thorium from impurities found in a slag containing thorium and said impurities, comprising leaching a composition containing thorium with water, removing the water solution, treating the residue with hydrochloric acid, separating the solution from the insoluble residue, adjusting its acidity to 1 to 3 normal, adding oxalic acid, and thereafter separating the precipitated thorium oxalate digesting the residue from the hydrochloric acid treatment with a strong solution of sodium hydroxide at an elevated temperature, removing said solution and treating the insoluble residue with hydrochloric acid, separating the solution from the insoluble residue, adjusting the acidity of this solution to 1 to 3 normal, adding nitric acid to oxidize the iron present, adding oxalic acid and thereafter separating the thorium oxalate thus precipitated.

  15. Process for recovering uranium

    DOE Patents [OSTI]

    MacWood, G. E.; Wilder, C. D.; Altman, D.

    1959-03-24

    A process useful in recovering uranium from deposits on stainless steel liner surfaces of calutrons is presented. The deposit is removed from the stainless steel surface by washing with aqueous nitric acid. The solution obtained containing uranium, chromium, nickel, copper, and iron is treated with an excess of ammonium hydroxide to precipitnte the uranium, iron, and chromium and convert the nickel and copper to soluble ammonio complexions. The precipitated material is removed, dried and treated with carbon tetrachloride at an elevated temperature of about 500 to 600 deg C to form a vapor mixture of UCl/ sub 4/, UCl/sub 5/, FeCl/sub 3/, and CrCl/sub 4/. The UCl/sub 4/ is separated from this vapor mixture by selective fractional condensation at a temperature of about 500 to 400 deg C.

  16. PROCESS FOR RECOVERING URANIUM

    DOE Patents [OSTI]

    MacWood, G.E.; Wilder, C.D.; Altman, D.

    1959-03-24

    A process is described for recovering uranium from deposits on stainless steel liner surfaces of calutrons. The deposit is removed from the stainless steel surface by washing with aqueous nitric acid. The solution obtained containing uranium, chromium, nickels copper, and iron is treated with excess of ammonium hydroxide to precipitatc the uranium, irons and chromium and convert thc nickel and copper to soluble ammonia complexions. The precipitated material is removed, dried, and treated with carbon tetrachloride at an elevated temperature of about 500 to 600 deg C to form a vapor mixture of UCl/sub 4/, UCl/sub 5/, FeCl/ sub 3/, and CrCl/sub 4/. The UCl/sub 4/ is separated from this vapor mixture by selective fractional condensation at a temprrature of about 300 to400 deg C.

  17. Application for Presidential Permit OE Docket No. PP-412 ITC Lake Erie

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Connector Project | Department of Energy Project Application for Presidential Permit OE Docket No. PP-412 ITC Lake Erie Connector Project Application from ITC Lake Erie to construct, operate and maintain electric transmission facilities at the U.S. - Canada Border. PP-412 Lake Erie Application.pdf (2.82 MB) More Documents & Publications Application for Presidential Permit OE Docket No. PP-412 ITC Lake Erie Connector Project: Federal Register Notice, Volume 80, No. 137 - July 17, 2015

  18. Method of recovering uranium hexafluoride

    DOE Patents [OSTI]

    Schuman, S.

    1975-12-01

    A method of recovering uranium hexafluoride from gaseous mixtures which comprises adsorbing said uranium hexafluoride on activated carbon is described.

  19. PROCESS OF RECOVERING URANIUM

    DOE Patents [OSTI]

    Kilner, S.B.

    1959-12-29

    A method is presented for separating and recovering uranium from a complex mixure of impurities. The uranium is dissolved to produce an aqueous acidic solution including various impurities. In accordance with one method, with the uranium in the uranyl state, hydrogen cyanide is introduced into the solution to complex the impurities. Subsequently, ammonia is added to the solution to precipitate the uraniunn as ammonium diuranate away from the impurities in the solution. Alternatively, the uranium is precipitated by adding an alkaline metal hydroxide. In accordance with the second method, the uranium is reduced to the uranous state in the solution. The reduced solution is then treated with solid alkali metal cyanide sufficient to render the solution about 0.1 to 1.0 N in cyanide ions whereat cyanide complex ions of the metal impurities are produced and the uranium is simultaneously precipituted as uranous hydroxide. Alternatively, hydrogen cyanide may be added to the reduced solution and the uranium precipitated subsequently by adding ammonium hydroxide or an alkali metal hydroxide. Other refinements of the method are also disclosed.

  20. PROCESS OF RECOVERING URANIUM

    DOE Patents [OSTI]

    Price, T.D.; Jeung, N.M.

    1958-06-17

    An improved precipitation method is described for the recovery of uranium from aqueous solutions. After removal of all but small amounts of Ni or Cu, and after complexing any iron present, the uranium is separated as the peroxide by adding H/sub 2/O/sub 2/. The improvement lies in the fact that the addition of H/sub 2/O/sub 2/ and consequent precipitation are carried out at a temperature below the freezing; point of the solution, so that minute crystals of solvent are present as seed crystals for the precipitation.

  1. Method for recovering metals from waste

    DOE Patents [OSTI]

    Wicks, G.G.; Clark, D.E.; Schulz, R.L.

    1998-12-01

    A method is described for recovering metals from metals-containing wastes, and vitrifying the remainder of the wastes for disposal. Metals-containing wastes such as circuit boards, cathode ray tubes, vacuum tubes, transistors and so forth, are broken up and placed in a suitable container. The container is heated by microwaves to a first temperature in the range of approximately 300--800 C to combust organic materials in the waste, then heated further to a second temperature in the range of approximately 1,000--1,550 C at which temperature glass formers present in the waste will cause it to melt and vitrify. Low-melting-point metals such as tin and aluminum can be recovered after organics combustion is substantially complete. Metals with higher melting points, such as gold, silver and copper, can be recovered from the solidified product or separated from the waste at their respective melting points. Network former-containing materials can be added at the start of the process to assist vitrification. 2 figs.

  2. Method for recovering metals from waste

    DOE Patents [OSTI]

    Wicks, George G.; Clark, David E.; Schulz, Rebecca L.

    2000-01-01

    A method for recovering metals from metals-containing wastes, and vitrifying the remainder of the wastes for disposal. Metals-containing wastes such as circuit boards, cathode ray tubes, vacuum tubes, transistors and so forth, are broken up and placed in a suitable container. The container is heated by microwaves to a first temperature in the range of approximately 300-800.degree. C. to combust organic materials in the waste, then heated further to a second temperature in the range of approximately 1,000-1,550.degree. C. at which temperature glass formers present in the waste will cause it to melt and vitrify. Low-melting-point metals such as tin and aluminum can be recovered after organics combustion is substantially complete. Metals with higher melting points, such as gold, silver and copper, can be recovered from the solidified product or separated from the waste at their respective melting points. Network former-containing materials can be added at the start of the process to assist vitrification.

  3. Method for recovering metals from waste

    DOE Patents [OSTI]

    Wicks, George G.; Clark, David E.; Schulz, Rebecca L.

    1998-01-01

    A method for recovering metals from metals-containing wastes, and vitrifying the remainder of the wastes for disposal. Metals-containing wastes such as circuit boards, cathode ray tubes, vacuum tubes, transistors and so forth, are broken up and placed in a suitable container. The container is heated by microwaves to a first temperature in the range of approximately 300.degree.-800.degree. C. to combust organic materials in the waste, then heated further to a second temperature in the range of approximately 1,000.degree.-1,550.degree. C. at which temperature glass formers present in the waste will cause it to melt and vitrify. Low-melting-point metals such as tin and aluminum can be recovered after organics combustion is substantially complete. Metals with higher melting points, such as gold, silver and copper, can be recovered from the solidified product or separated from the waste at their respective melting points. Network former-containing materials can be added at the start of the process to assist vitrification.

  4. Method for recovering materials from waste

    DOE Patents [OSTI]

    Wicks, G.G.; Clark, D.E.; Schulz, R.L.

    1994-01-01

    A method for recovering metals from metals-containing wastes, a vitrifying the remainder of the wastes for disposal. Metals-containing wastes such as circuit boards, cathode ray tubes, vacuum tubes, transistors and so forth, are broken up and placed in a suitable container. The container is heated by microwaves to a first temperature in the range of approximately 300--800{degrees}C to combust organic materials in the waste, then heated further to a second temperature in the range of approximately 1000--1550{degrees}C at which temperature glass formers present in the waste will cause it to melt and vitrify. Low-melting-point metals such as tin and aluminum can be recovered after organics combustion is substantially complete. Metals with higher melting points, such as gold, silver and copper, can be recovered from the solidified product or separated from the waste at their respective melting points. Network former-containing materials can be added at the start of the process to assist vitrification.

  5. Application for Presidential Permit OE Docket No. PP-412 ITC Lake Erie

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Connector Project: Federal Register Notice, Volume 80, No. 137 - July 17, 2015 | Department of Energy Project: Federal Register Notice, Volume 80, No. 137 - July 17, 2015 Application for Presidential Permit OE Docket No. PP-412 ITC Lake Erie Connector Project: Federal Register Notice, Volume 80, No. 137 - July 17, 2015 Application from ITC Lake Erie to construct, operate and maintain electric transmission facilities at the U.S. - Canada Border. Federal Register Notice. PP-412 ITC Lake Erie

  6. Recover Heat from Boiler Blowdown

    SciTech Connect (OSTI)

    Not Available

    2006-01-01

    This revised ITP tip sheet on recovering heat from boiler blowdown provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  7. PROCESS OF RECOVERING ALKALI METALS

    DOE Patents [OSTI]

    Wolkoff, J.

    1961-08-15

    A process is described of recovering alkali metal vapor by sorption on activated alumina, activated carbon, dehydrated zeolite, activated magnesia, or Fuller's earth preheated above the vaporization temperature of the alkali metal and subsequent desorption by heating the solvent under vacuum. (AEC)

  8. One million curies of radioactive material recovered

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Radioactive material recovered One million curies of radioactive material recovered The accomplishment represents a major milestone in protecting our nation and the world from...

  9. Recovering entanglement by local operations

    SciTech Connect (OSTI)

    D’Arrigo, A.; Lo Franco, R.; Benenti, G.; Paladino, E.; Falci, G.

    2014-11-15

    We investigate the phenomenon of bipartite entanglement revivals under purely local operations in systems subject to local and independent classical noise sources. We explain this apparent paradox in the physical ensemble description of the system state by introducing the concept of “hidden” entanglement, which indicates the amount of entanglement that cannot be exploited due to the lack of classical information on the system. For this reason this part of entanglement can be recovered without the action of non-local operations or back-transfer process. For two noninteracting qubits under a low-frequency stochastic noise, we show that entanglement can be recovered by local pulses only. We also discuss how hidden entanglement may provide new insights about entanglement revivals in non-Markovian dynamics.

  10. Methods of recovering alkali metals

    SciTech Connect (OSTI)

    Krumhansl, James L; Rigali, Mark J

    2014-03-04

    Approaches for alkali metal extraction, sequestration and recovery are described. For example, a method of recovering alkali metals includes providing a CST or CST-like (e.g., small pore zeolite) material. The alkali metal species is scavenged from the liquid mixture by the CST or CST-like material. The alkali metal species is extracted from the CST or CST-like material.

  11. Consumers' Gas lays coiled steel tubing in Lake Erie

    SciTech Connect (OSTI)

    Not Available

    1980-10-01

    Forty-four miles of polypropylene-coated, coiled steel tubing have been laid underwater by the Consumers' Gas Co. of Toronto. Laid in 33,000-ft sections from a giant reel, the tubing is used for the remote control of subsea hydraulically operated line valves and the distribution of methyl alcohol to subsea gas wells. The installation is the first of long, continuous tubing underwater using this technology in Canada. The line was installed in conjunction with a newly completed gas well gathering system and processing plant that is expected to yield more than 35 billion cu ft of fuel over the next 15 yr. The new system under W.-Central Lake Erie provides consumers with a cost-effective method for remotely controlling underwater hydraulic valves and distributing methyl alcohol to eliminate hydrate build-up in the gas gathering lines.

  12. METHOD OF RECOVERING URANIUM COMPOUNDS

    DOE Patents [OSTI]

    Poirier, R.H.

    1957-10-29

    S>The recovery of uranium compounds which have been adsorbed on anion exchange resins is discussed. The uranium and thorium-containing residues from monazite processed by alkali hydroxide are separated from solution, and leached with an alkali metal carbonate solution, whereby the uranium and thorium hydrorides are dissolved. The carbonate solution is then passed over an anion exchange resin causing the uranium to be adsorbed while the thorium remains in solution. The uranium may be recovered by contacting the uranium-holding resin with an aqueous ammonium carbonate solution whereby the uranium values are eluted from the resin and then heating the eluate whereby carbon dioxide and ammonia are given off, the pH value of the solution is lowered, and the uranium is precipitated.

  13. Process for recovering actinide values

    DOE Patents [OSTI]

    Horwitz, E. Philip; Mason, George W.

    1980-01-01

    A process for rendering actinide values recoverable from sodium carbonate scrub waste solutions containing these and other values along with organic compounds resulting from the radiolytic and hydrolytic degradation of neutral organophosphorous extractants such as tri-n butyl phosphate (TBP) and dihexyl-N,N-diethyl carbamylmethylene phosphonate (DHDECAMP) which have been used in the reprocessing of irradiated nuclear reactor fuels. The scrub waste solution is preferably made acidic with mineral acid, to form a feed solution which is then contacted with a water-immiscible, highly polar organic extractant which selectively extracts the degradation products from the feed solution. The feed solution can then be processed to recover the actinides for storage or recycled back into the high-level waste process stream. The extractant is recycled after stripping the degradation products with a neutral sodium carbonate solution.

  14. Recovering Radioactive Materials with OSRP team

    ScienceCinema (OSTI)

    None

    2010-01-08

    The National Nuclear Security Administration sponsors a program, executed by Los Alamos National Laboratory, to recover radioisotopes used by industry and academia and no longer needed. Called the "Offsite Source Recovery Program (OSRP), it has recovered

  15. Erosion Resistance Index (ERI) to Assess Surface Stability in Desert Environments

    SciTech Connect (OSTI)

    Hamada, Yuki; Grippo, Mark A.

    2015-11-01

    A new spectral index—erosion resistance index (ERI)—was developed to assess erosion risks in desert landscapes. The index was developed by applying trigonometry to the combination of the green/red band-ratio and the red/near infrared band-ratio from very high spatial resolution imagery. The resultant ERI maps showed spatially cohesive distributions of high and low index values across the study areas. High index values were observed over areas that were resistant to erosion (such as desert pavement and dense vegetation), while low index values overlapped with areas likely dominated by loose sandy soils, such as stream beds and access roads. Although further investigation is warranted, this new index, ERI, shows promise for the assessment of erosion risks in desert regions.

  16. Recovering Radioactive Materials with ORSP Team

    ScienceCinema (OSTI)

    LANL

    2009-09-01

    The National Nuclear Security Administration sponsors a program, executed by Los Alamos National Laboratory, to recover radioisotopes used by industry and academia and no longer needed. Called the "Offsite Source Recovery Program (OSRP), it has recovered more than 16,000 orphan sources as of 2008.

  17. Onsite Recovered Energy LP | Open Energy Information

    Open Energy Info (EERE)

    to: navigation, search Name: Onsite Recovered Energy LP Address: Centurion Region: South Africa Sector: Marine and Hydrokinetic Year Founded: 2009 Phone Number: +27 (0)83 526-3767...

  18. Recovered materials and the proposed procurement rule

    SciTech Connect (OSTI)

    Bergeson, L.L.

    1994-07-01

    The US Environmental Protection Agency (EPA) proposed a Comprehensive Procurement Guideline'' in April designating items that are or can be made with recovered materials. The Agency is proposing to designate 21 additional items and to amend the building installation guideline to establish recovered materials content levels for fiberglass and increase the levels for rock wool. The Comprehensive Procurement Guideline implements Section 6002(e) of the Resource Conservation and Recovery Act (RCRA), and Section 502 of Executive Order 12873. RCRA Section 6002 requires EPA to designate items that are or can be made with recovered materials and to recommend practices to assist federal procuring agencies with meeting their statutory obligations under RCRA Section 6002. After EPA designates an item, RCRA requires that each procuring agency purchase that designated item composed of the highest percentage of recovered materials practicable.

  19. One million curies of radioactive material recovered

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Radioactive material recovered One million curies of radioactive material recovered The accomplishment represents a major milestone in protecting our nation and the world from material that could be used in "dirty bombs" by terrorists. December 22, 2014 Rick Day of Los Alamos National Laboratory's International Threat Reduction group and the Off-Site Source Recovery Project (OSRP) holds a non-radioactive training mockup of what a typical cobalt-60 source might look like. The source is

  20. METHOD FOR RECOVERING URANIUM FROM OILS

    DOE Patents [OSTI]

    Gooch, L.H.

    1959-07-14

    A method is presented for recovering uranium from hydrocarbon oils, wherein the uranium is principally present as UF/sub 4/. According to the invention, substantially complete removal of the uranium from the hydrocarbon oil may be effected by intimately mixing one part of acetone to about 2 to 12 parts of the hydrocarbon oil containing uranium and separating the resulting cake of uranium from the resulting mixture. The uranium in the cake may be readily recovered by burning to the oxide.

  1. Process for recovering filler from polymer

    DOE Patents [OSTI]

    Smith, Maurice L.; Smith, Robert M.

    1978-01-01

    This disclosure relates to a process for recovering filler material from a polymeric matrix by reacting the matrix at an elevated temperature in a gas atmosphere with a controlled oxidizing potential and thereafter separating and cleaning the residue from the reaction mixture.

  2. Recover Heat from Boiler Blowdown, Energy Tips: STEAM, Steam...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    0 Recover Heat from Boiler Blowdown Heat can be recovered from boiler blowdown by using a heat exchanger to preheat boiler makeup water. Any boiler with continuous blowdown ...

  3. Use a Vent Condenser to Recover Flash Steam Energy | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Use a Vent Condenser to Recover Flash Steam Energy (January 2012) (374.64 KB) More Documents & Publications Recover Heat from Boiler Blowdown Deaerators in Industrial Steam Systems ...

  4. Recovering START institutional knowledge (Conference) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Recovering START institutional knowledge Citation Details In-Document Search Title: Recovering START institutional knowledge You are accessing a document from the Department of ...

  5. Apparatus for separating and recovering hydrogen isotopes

    DOE Patents [OSTI]

    Heung, Leung K.

    1994-01-01

    An apparatus for recovering hydrogen and separating its isotopes. The apparatus includes a housing bearing at least a fluid inlet and a fluid outlet. A baffle is disposed within the housing, attached thereto by a bracket. A hollow conduit is coiled about the baffle, in spaced relation to the baffle and the housing. The coiled conduit is at least partially filled with a hydride. The hydride can be heated to a high temperature and cooled to a low temperature quickly by circulating a heat transfer fluid in the housing. The spacing between the baffle and the housing maximizes the heat exchange rate between the fluid in the housing and the hydride in the conduit. The apparatus can be used to recover hydrogen isotopes (protium, deuterium and tritium) from gaseous mixtures, or to separate hydrogen isotopes from each other.

  6. ICE MINERALOGY ACROSS AND INTO THE SURFACES OF PLUTO, TRITON, AND ERIS

    SciTech Connect (OSTI)

    Tegler, S. C.; Grundy, W. M.; Olkin, C. B.; Young, L. A.; Romanishin, W.; Cornelison, D. M.; Khodadadkouchaki, R. E-mail: W.Grundy@lowell.edu E-mail: layoung@boulder.swri.edu E-mail: DavidCornelison@MissouriState.edu

    2012-05-20

    We present three near-infrared spectra of Pluto taken with the Infrared Telescope Facility and SpeX, an optical spectrum of Triton taken with the MMT and the Red Channel Spectrograph, and previously published spectra of Pluto, Triton, and Eris. We combine these observations with a two-phase Hapke model and gain insight into the ice mineralogy on Pluto, Triton, and Eris. Specifically, we measure the methane-nitrogen mixing ratio across and into the surfaces of these icy dwarf planets. In addition, we present a laboratory experiment that demonstrates it is essential to model methane bands in spectra of icy dwarf planets with two methane phases-one highly diluted by nitrogen and the other rich in methane. For Pluto, we find bulk, hemisphere-averaged, methane abundances of 9.1% {+-} 0.5%, 7.1% {+-} 0.4%, and 8.2% {+-} 0.3% for sub-Earth longitudes of 10 Degree-Sign , 125 Degree-Sign , and 257 Degree-Sign . Application of the Wilcoxon rank sum test to our measurements finds these small differences are statistically significant. For Triton, we find bulk, hemisphere-averaged, methane abundances of 5.0% {+-} 0.1% and 5.3% {+-} 0.4% for sub-Earth longitudes of 138 Degree-Sign and 314 Degree-Sign . Application of the Wilcoxon rank sum test to our measurements finds the differences are not statistically significant. For Eris, we find a bulk, hemisphere-averaged, methane abundance of 10% {+-} 2%. Pluto, Triton, and Eris do not exhibit a trend in methane-nitrogen mixing ratio with depth into their surfaces over the few centimeter range probed by these observations. This result is contrary to the expectation that since visible light penetrates deeper into a nitrogen-rich surface than the depths from which thermal emission emerges, net radiative heating at depth would drive preferential sublimation of nitrogen leading to an increase in the methane abundance with depth.

  7. Recovering hydrocarbons from hydrocarbon-containing vapors

    DOE Patents [OSTI]

    Mirza, Zia I.; Knell, Everett W.; Winter, Bruce L.

    1980-09-30

    Values are recovered from a hydrocarbon-containing vapor by contacting the vapor with quench liquid consisting essentially of hydrocarbons to form a condensate and a vapor residue, the condensate and quench fluid forming a combined liquid stream. The combined liquid stream is mixed with a viscosity-lowering liquid to form a mixed liquid having a viscosity lower than the viscosity of the combined liquid stream to permit easy handling of the combined liquid stream. The quench liquid is a cooled portion of the mixed liquid. Viscosity-lowering liquid is separated from a portion of the mixed liquid and cycled to form additional mixed liquid.

  8. Process for recovering organic vapors from air

    DOE Patents [OSTI]

    Baker, Richard W.

    1985-01-01

    A process for recovering and concentrating organic vapor from a feed stream of air having an organic vapor content of no more than 20,000 ppm by volume. A thin semipermeable membrane is provided which has a feed side and a permeate side, a selectivity for organic vapor over air of at least 50, as measured by the ratio of organic vapor permeability to nitrogen permeability, and a permeability of organic vapor of at least 3.times.10.sup.-7 cm.sup.3 (STP) cm/cm.sup.2 sec.cm Hg. The feed stream is passed across the feed side of the thin semipermeable membrane while providing a pressure on the permeate side which is lower than the feed side by creating a partial vacuum on the permeate side so that organic vapor passes preferentially through the membrane to form an organic vapor depleted air stream on the feed side and an organic vapor enriched stream on the permeate side. The organic vapor which has passed through the membrane is compressed and condensed to recover the vapor as a liquid.

  9. PROCESS OF RECOVERING URANIUM FROM ITS ORES

    DOE Patents [OSTI]

    Galvanek, P. Jr.

    1959-02-24

    A process is presented for recovering uranium from its ores. The crushed ore is mixed with 5 to 10% of sulfuric acid and added water to about 5 to 30% of the weight of the ore. This pugged material is cured for 2 to 3 hours at 100 to 110 deg C and then cooled. The cooled mass is nitrate-conditioned by mixing with a solution equivalent to 35 pounds of ammunium nitrate and 300 pounds of water per ton of ore. The resulting pulp containing 70% or more solids is treated by upflow percolation with a 5% solution of tributyl phosphate in kerosene at a rate equivalent to a residence time of about one hour to extract the solubilized uranium. The uranium is recovered from the pregnant organic liquid by counter-current washing with water. The organic extractant may be recycled. The uranium is removed from the water solution by treating with ammonia to precipitate ammonium diuranate. The filtrate from the last step may be recycled for the nitrate-conditioning treatment.

  10. Process for recovering organic components from liquid streams

    DOE Patents [OSTI]

    Blume, Ingo; Baker, Richard W.

    1991-01-01

    A separation process for recovering organic components from liquid streams. The process is a combination of pervaporation and decantation. In cases where the liquid stream contains the organic to be separated in dissolved form, the pervaporation step is used to concentrate the organic to a point above the solubility limit, so that a two-phase permeate is formed and then decanted. In cases where the liquid stream is a two-phase mixture, the decantation step is performed first, to remove the organic product phase, and the residue from the decanter is then treated by pervaporation. The condensed permeate from the pervaporation unit is sufficiently concentrated in the organic component to be fed back to the decanter. The process can be tailored to produce only two streams: an essentially pure organic product stream suitable for reuse, and a residue stream for discharge or reuse.

  11. Apparatus to recover tritium from tritiated molecules

    DOE Patents [OSTI]

    Swansiger, William A. (Livermore, CA)

    1988-01-01

    An apparatus for recovering tritium from tritiated compounds is provided, including a preheater for heating tritiated water and other co-injected tritiated compounds to temperatures of about 600.degree. C. and a reactor charged with a mixture of uranium and uranium dioxide for receiving the preheated mixture. The reactor vessel is preferably stainless steel of sufficient mass so as to function as a heat sink preventing the reactor side walls from approaching high temperatures. A disposable copper liner extends between the reaction chamber and stainless steel outer vessel to prevent alloying of the uranium with the outer vessel. The uranium dioxide functions as an insulating material and heat sink preventing the reactor side walls from attaining reaction temperatures to thereby minimize tritium permeation rates. The uranium dioxide also functions as a diluent to allow for volumetric expansion of the uranium as it is converted to uranium dioxide.

  12. PROCESSES OF RECOVERING URANIUM FROM A CALUTRON

    DOE Patents [OSTI]

    Baird, D.O.; Zumwalt, L.R.

    1958-07-15

    An improved process is described for recovering the residue of a uranium compound which has been subjected to treatment in a calutron, from the parts of the calutron disposed in the source region upon which the residue is deposited. The process may be utilized when the uranium compound adheres to a surface containing metals of the group consisting of copper, iron, chromium, and nickel. The steps comprise washing the surface with an aqueous acidic oxidizing solvent for the uranium whereby there is obtained an acidic aqueous Solution containing uranium as uranyl ions and metals of said group as impurities, treating the acidic solution with sodium acetate in the presenee of added sodium nitrate to precipitate the uranium as sodium uranyl acetate away from the impurities in the solution, and separating the sodium uranyl acetate from the solution.

  13. EIS-0079: 300-kV International Submarine Transmission Line- Erie, Pennsylvania to Nanticoke, Ontario, Canada General Public Utilities Corporation

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy Office of Energy Emergency Operations developed this statement to assess the potential environmental and socioeconomic impacts of the construction and operation of 44 miles of cable between the Erie West Substation and the Canadian border.

  14. Electrochemical processes in recovering metals from ores

    SciTech Connect (OSTI)

    Felker, D.L. ); Bautista, R.G. . Dept. of Chemical and Metallurgical Engineering)

    1990-04-01

    Chalcopyrite (CuFeS{sub 2}) is one of the most abundant copper-bearing minerals in the U.S. Oxidative leaching and smelting and refining are the most common methods used for recovering copper from chalcopyrite. One of the problems associated with oxidative leaching is the formation of an elemental sulfur product layer around the unreacted chalcopyrite core. The sulfur coating slows the reaction by inhibiting both the diffusion of the oxidant to the unreacted core, and the diffusion of the copper and iron species to the bulk solution. Another problem with leaching is that the iron and copper are oxidized simultaneously. Both appear in the bulk solution in their most oxidized states. The direct electrodissolution of copper sulfide ore slurries could reduce the number of steps involved in the copper recovery process, possibly leading to significant reductions in energy consumption and operating costs. The potential application of electrodissolution processes in hydrometallurgy has been reviewed. This paper reviews investigations of the electrochemical dissolution of chalcopyrite, digenite (Cu{sub 1.8}S), chalcocite (Cu{sub 2}S) and covellite (CuS).

  15. Recovering metals from spent hydroprocessing catalysts

    SciTech Connect (OSTI)

    Hubred, G. L.; Van Leirshurg, D. A.

    1985-02-19

    A process for recovering the metal values from spent hydroprocessing catalyst particles. The metal values will include at least one metal of Group VIII of the Periodic Table and at least one metal of Group Vb or Group VIb of the Periodic Table. The spent catalyst particles are first roasted at between 400/sup 0/ C. and 600/sup 0/ C. and then contacted with a first aqueous solution of ammonia and an ammonium salt forming a first pregnant liquor. The once-leached spent hydroprocessing catalysts are contacted with a second aqueous solution of sulfur dioxide forming a second pregnant liquor. The metal values are precipitated from the second pregnant liquor with hydrogen sulfide and the precipitate is roasted with unroasted spent hydroprocessing catalysts. The metal values of Group Vb and Group VIb in the first pregnant liquor are transferred into a first organic solution by liquid ion exchange. The first organic solution is stripped by an aqueous strip solution and the metal values separated by sequential precipitation. The metals of Group VIII are separated and purified by serial liquid ion exchange.

  16. Talking Points

    U.S. Energy Information Administration (EIA) Indexed Site

    Talking Points NATURAL GAS MARKET INTEGRITY: How EIA Helps Presentation by William F. Hederman Congressional Research Service at EIA 30 th Anniversary Conference April 8, 2008 ...

  17. Recover Heat from Boiler Blowdown | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDF icon Recover Heat from Boiler Blowdown (January 2012) More Documents & Publications Install an Automatic Blowdown-Control System Flash High-Pressure Condensate to Regenerate ...

  18. Recover Heat from Boiler Blowdown | Department of Energy

    Energy Savers [EERE]

    STEAM TIP SHEET 10 Recover Heat from Boiler Blowdown (January 2012) (372.21 KB) More Documents & Publications Install an Automatic Blowdown-Control System Consider Installing a ...

  19. Use Vapor Recompression to Recover Low-Pressure Waste Steam

    Broader source: Energy.gov [DOE]

    This tip sheet on recovering low-pressure waste steam provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  20. Microsoft PowerPoint - Tues - NTSF 2013 - O'Connor [Recovered...

    Office of Environmental Management (EM)

    * NTSF newsletter * NTSF wikiPublic web site * Webinars * Other External Communications * State Regional Groups and Tribes * ASKPATPublic Web Site * Waste Information Management ...

  1. final ERI-2142 18-1501 Analysis of Potential Effects on Domestic Industries of DOE Excess Uranium Inventory 2015-2024.docx

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ERI-2142.18-1501 Analysis of the Potential Effects on the Domestic Uranium Mining, Conversion and Enrichment Industries of the Introduction of DOE Excess Uranium Inventory During CY 2015 Through 2024 ENERGY RESOURCES INTERNATIONAL, INC. 1015 18 th Street, NW, Suite 650 Washington, DC 20036 USA Telephone: (202) 785-8833 Facsimile: (202) 785-8834 ERI-2142.18-1501 Analysis of the Potential Effects on the Domestic Uranium Mining, Conversion and Enrichment Industries of the Introduction of DOE

  2. Aqueous process for recovering sulfur from hydrogen sulfide-bearing gas

    DOE Patents [OSTI]

    Basu, Arunabha

    2015-05-05

    A process for recovering sulfur from a hydrogen sulfide-bearing gas utilizes an aqueous reaction medium, a temperature of about 110-150.degree. C., and a high enough pressure to maintain the aqueous reaction medium in a liquid state. The process reduces material and equipment costs and addresses the environmental disadvantages associated with known processes that rely on high boiling point organic solvents.

  3. USE OF POLYMERS TO RECOVER VISCOUS OIL FROM UNCONVENTIONAL RESERVOIRS

    SciTech Connect (OSTI)

    Randall Seright

    2011-09-30

    This final technical progress report summarizes work performed the project, 'Use of Polymers to Recover Viscous Oil from Unconventional Reservoirs.' The objective of this three-year research project was to develop methods using water soluble polymers to recover viscous oil from unconventional reservoirs (i.e., on Alaska's North Slope). The project had three technical tasks. First, limits were re-examined and redefined for where polymer flooding technology can be applied with respect to unfavorable displacements. Second, we tested existing and new polymers for effective polymer flooding of viscous oil, and we tested newly proposed mechanisms for oil displacement by polymer solutions. Third, we examined novel methods of using polymer gels to improve sweep efficiency during recovery of unconventional viscous oil. This report details work performed during the project. First, using fractional flow calculations, we examined the potential of polymer flooding for recovering viscous oils when the polymer is able to reduce the residual oil saturation to a value less than that of a waterflood. Second, we extensively investigated the rheology in porous media for a new hydrophobic associative polymer. Third, using simulation and analytical studies, we compared oil recovery efficiency for polymer flooding versus in-depth profile modification (i.e., 'Bright Water') as a function of (1) permeability contrast, (2) relative zone thickness, (3) oil viscosity, (4) polymer solution viscosity, (5) polymer or blocking-agent bank size, and (6) relative costs for polymer versus blocking agent. Fourth, we experimentally established how much polymer flooding can reduce the residual oil saturation in an oil-wet core that is saturated with viscous North Slope crude. Finally, an experimental study compared mechanical degradation of an associative polymer with that of a partially hydrolyzed polyacrylamide. Detailed results from the first two years of the project may be found in our first and

  4. Focused risk assessment: Mound Plant, Miami-Erie Canal Operable Unit 4

    SciTech Connect (OSTI)

    Rogers, D.R.; Dunning, D.F.

    1994-09-29

    In 1969, an underground waste line at Mound Plant ruptured and released plutonium-238 in a dilute nitric acid solution to the surrounding soils. Most of the acid was neutralized by the native soils. The plutonium, which in a neutral solution is tightly sorbed onto clay particles, remained within the spill area. During remediation, a severe storm eroded some of the contaminated soil. Fine grained plutonium-contaminated clay particles were carried away through the natural drainage courses to the remnants of the Miami-Erie Canal adjacent to Mound Plant, and then into the Great Miami River. This focused risk assessment considers exposure pathways relevant to site conditions, including incidental ingestion of contaminated soils, ingestion of drinking water and fish, and inhalation of resuspended soils and sediments. For each potential exposure pathway, a simplified conceptual model and exposure scenarios have been used to develop conservative estimates of potential radiation dose equivalents and health risks. The conservatism of the dose and risk estimates provides a substantive margin of safety in assuring that the public health is protected.

  5. Analysis of ``soft`` recovered shaped charge jet particles

    SciTech Connect (OSTI)

    Lassila, D.H.; Nikkel, D.J. Jr.; Kershaw, R.P.; Walters, W.P.

    1996-04-01

    A shaped charge with an 81 mm diameter, 42{degree} apex angle oxygen-free high-conductivity (OFHC) copper conical liner was fired into a ``soft`` recovery bunker to allow metallurgical examination of recovered jet particles and the slug. The initial weight of the copper liner was 245 g, of which 184 g was recovered. The number of jet particles recovered was 37 (approximately 63% of the particles formed by the charge). Extensive metallurgical analyses were performed on the recovered slug and jet particles. The microstructural features associated with voids, e.g., dendritic grain growth, clearly indicate that the regions in the vicinity of the centerline of the slug and jet particles were melted. In this work the authors present calculations of jet temperature as a function of constitutive behavior. In order to predict melt in the center region of the jet they find it necessary to scale flow stress with a pressure dependent shear modulus.

  6. Improving CO2 Efficiency for Recovering Oil in Heterogeneous Reservoirs

    SciTech Connect (OSTI)

    Grigg, Reid B.; Svec, Robert K.

    2003-03-10

    The work strived to improve industry understanding of CO2 flooding mechanisms with the ultimate goal of economically recovering more of the U.S. oil reserves. The principle interests are in the related fields of mobility control and injectivity.

  7. Recover Heat from Boiler Blowdown - Steam Tip Sheet #10

    SciTech Connect (OSTI)

    2012-01-31

    This revised AMO tip sheet on recovering heat from boiler blowdown provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  8. FORMING REALISTIC LATE-TYPE SPIRALS IN A {Lambda}CDM UNIVERSE: THE ERIS SIMULATION

    SciTech Connect (OSTI)

    Guedes, Javiera; Madau, Piero [Department of Astronomy and Astrophysics, University of California, 1156 High Street, Santa Cruz, CA 95064 (United States); Callegari, Simone [Institute for Theoretical Physics, University of Zuerich, Winterthurerstrasse 190, CH-9057 Zuerich (Switzerland); Mayer, Lucio [Institute for Astronomy, ETH Zuerich, Wolgang-Pauli-Strasse 27, 8093 Zuerich (Switzerland)

    2011-12-01

    Simulations of the formation of late-type spiral galaxies in a cold dark matter ({Lambda}CDM) universe have traditionally failed to yield realistic candidates. Here we report a new cosmological N-body/smooth particle hydrodynamic simulation of extreme dynamic range in which a close analog of a Milky Way disk galaxy arises naturally. Named 'Eris', the simulation follows the assembly of a galaxy halo of mass M{sub vir} = 7.9 Multiplication-Sign 10{sup 11} M{sub Sun} with a total of N = 18.6 million particles (gas + dark matter + stars) within the final virial radius, and a force resolution of 120 pc. It includes radiative cooling, heating from a cosmic UV field and supernova explosions (blastwave feedback), a star formation recipe based on a high gas density threshold (n{sub SF} = 5 atoms cm{sup -3} rather than the canonical n{sub SF} = 0.1 atoms cm{sup -3}), and neglects any feedback from an active galactic nucleus. Artificial images are generated to correctly compare simulations with observations. At the present epoch, the simulated galaxy has an extended rotationally supported disk with a radial scale length R{sub d} = 2.5 kpc, a gently falling rotation curve with circular velocity at 2.2 disk scale lengths of V{sub 2.2} = 214 km s{sup -1}, an i-band bulge-to-disk ratio B/D = 0.35, and a baryonic mass fraction within the virial radius that is 30% below the cosmic value. The disk is thin, has a typical H I-to-stellar mass ratio, is forming stars in the region of the {Sigma}{sub SFR}-{Sigma}{sub HI} plane occupied by spiral galaxies, and falls on the photometric Tully-Fisher and the stellar-mass-halo-virial-mass relations. Hot (T > 3 Multiplication-Sign 10{sup 5} K) X-ray luminous halo gas makes up only 26% of the universal baryon fraction and follows a 'flattened' density profile {proportional_to}r{sup -1.13} out to r = 100 kpc. Eris appears then to be the first cosmological hydrodynamic simulation in which the galaxy structural properties, the mass budget in the

  9. Working Together to Recover and Rebuild After Hurricane Sandy | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Recover and Rebuild After Hurricane Sandy Working Together to Recover and Rebuild After Hurricane Sandy November 5, 2012 - 6:30pm Addthis Supervising Engineer for Public Service Electric and Gas Company, Michael Vincent, right, Department of Energy Secretary Steven Chu, center, and FEMA Deputy Administrator Rich Serino review power restoration at the Hoboken electrical substation. Restoration of power to communities impacted by Hurricane Sandy remains a high priority. | Photo by

  10. Pyrochemical investigations into recovering plutonium from americium extraction salt residues

    SciTech Connect (OSTI)

    Fife, K.W.; West, M.H.

    1987-05-01

    Progress into developing a pyrochemical technique for separating and recovering plutonium from spent americium extraction waste salts has concentrated on selective chemical reduction with lanthanum metal and calcium metal and on the solvent extraction of americium with calcium metal. Both techniques are effective for recovering plutonium from the waste salt, although neither appears suitable as a separation technique for recycling a plutonium stream back to mainline purification processes. 17 refs., 13 figs., 2 tabs.

  11. ERI-2142 17-1401 DOE Potential Market Impact CY2014-CY2033 April 25, 2014.docx

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Draft April 25, 2014 ERI-2142.17-1401/April 2014 iii Energy Resources International, Inc. NOTICE This report was prepared for the Office of Uranium Management and Policy in the Office of Nuclear Energy, Department of Energy (DOE) under Task 17 under GSA FABS Contract No. GS-23F0242P and DOE Contract No. DE-DT0000752. DISCLAIMER Any views expressed or conclusions made in this independent report are solely the opinion of Energy Resources International, Inc. and do not necessarily represent the

  12. Process for recovering niobium from uranium-niobium alloys

    DOE Patents [OSTI]

    Wallace, Steven A.; Creech, Edward T.; Northcutt, Walter G.

    1983-01-01

    Niobium is recovered from scrap uranium-niobium alloy by melting the scrap with tin, solidifying the billet thus formed, heating the billet to combine niobium with tin therein, placing the billet in hydrochloric acid to dissolve the uranium and leave an insoluble residue of niobium stannide, then separating the niobium stannide from the acid.

  13. Process for recovering niobium from uranium-niobium alloys

    DOE Patents [OSTI]

    Wallace, S.A.; Creech, E.T.; Northcutt, W.G.

    1982-09-27

    Niobium is recovered from scrap uranium-niobium alloy by melting the scrap with tin, solidifying the billet thus formed, heating the billet to combine niobium with tin therein, placing the billet in hydrochloric acid to dissolve the uranium and form a precipitate of niobium stannide, then separating the precipitate from the acid.

  14. Methods for Recovering Metals From Electronic Waste, and Related Systems -

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Innovation Portal Industrial Technologies Industrial Technologies Find More Like This Return to Search Methods for Recovering Metals From Electronic Waste, and Related Systems Idaho National Laboratory Contact INL About This Technology Publications: PDF Document Publication Technology Summary Poster (4,219 KB) PDF Document Publication Technology Fact Sheet (1,012 KB) Technology Marketing Summary End-of-life electronic devices such as smart phones, computers, televisions and other

  15. Process for recovering tritium from molten lithium metal

    DOE Patents [OSTI]

    Maroni, Victor A.

    1976-01-01

    Lithium tritide (LiT) is extracted from molten lithium metal that has been exposed to neutron irradiation for breeding tritium within a thermonuclear or fission reactor. The extraction is performed by intimately contacting the molten lithium metal with a molten lithium salt, for instance, lithium chloride - potassium chloride eutectic to distribute LiT between the salt and metal phases. The extracted tritium is recovered in gaseous form from the molten salt phase by a subsequent electrolytic or oxidation step.

  16. Method of recovering hazardous waste from phenolic resin filters

    DOE Patents [OSTI]

    Meikrantz, David H.; Bourne, Gary L.; McFee, John N.; Burdge, Bradley G.; McConnell, Jr., John W.

    1991-01-01

    The invention is a process for the recovery of hazardous wastes such as heavy metals and radioactive elements from phenolic resin filter by a circulating a solution of 8 to 16 molar nitric acid at a temperature of 110 to 190 degrees F. through the filter. The hot solution dissolves the filter material and releases the hazardous material so that it can be recovered or treated for long term storage in an environmentally safe manner.

  17. Method for recovering oil from an underground formation

    SciTech Connect (OSTI)

    Hesselink, F.T.; Saidi, A.M.

    1982-12-21

    Method for recovering oil from an underground formation consisting of blocks of relatively low permeability with an oilwet pore space containing oil surrounded by a fracture network of relatively high permeability by supplying to the fracture network an aqueous solution of a surfactant adapted for decreasing the surface tension between water and oil and displacing the oil from the oil-wet pore space of the blocks.

  18. NNSA Recovers Radiological Material from Mexico | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration | (NNSA) Recovers Radiological Material from Mexico July 28, 2015 The irradiators were loaded on the U.S. Air Force C-17 in Southern Mexico and flown back to a base in the United States. WASHINGTON, D.C. - The Department of Energy's (DOE) National Nuclear Security Administration (NNSA), in partnership with the Defense Threat Reduction Agency (DTRA), the U.S. Air Force (USAF), the U.S. Department of Agriculture (USDA), and the United Mexican States, has successfully completed

  19. Critical Point Finder

    Energy Science and Technology Software Center (OSTI)

    2007-03-15

    The program robustly finds the critical points in the electric field generated by a specified collection of point charges.

  20. Method of recovering adsorbed liquid compounds from molecular sieve columns

    DOE Patents [OSTI]

    Burkholder, H.R.; Fanslow, G.E.

    1983-12-20

    Molecularly adsorbed volatile liquid compounds are recovered from molecular sieve adsorbent columns by directionally applying microwave energy to the bed of the adsorbent to produce a mixed liquid-gas effluent. The gas portion of the effluent generates pressure within the bed to promote the discharge of the effluent from the column bottoms. Preferably the discharged liquid-gas effluent is collected in two to three separate fractions, the second or intermediate fraction having a substantially higher concentration of the desorbed compound than the first or third fractions. The desorption does not need to be assisted by passing a carrier gas through the bed or by applying reduced pressure to the outlet from the bed. 8 figs.

  1. Separated-orbit bisected energy-recovered linear accelerator

    DOE Patents [OSTI]

    Douglas, David R.

    2015-09-01

    A separated-orbit bisected energy-recovered linear accelerator apparatus and method. The accelerator includes a first linac, a second linac, and a plurality of arcs of differing path lengths, including a plurality of up arcs, a plurality of downgoing arcs, and a full energy arc providing a path independent of the up arcs and downgoing arcs. The up arcs have a path length that is substantially a multiple of the RF wavelength and the full energy arc includes a path length that is substantially an odd half-integer multiple of the RF wavelength. Operation of the accelerator includes accelerating the beam utilizing the linacs and up arcs until the beam is at full energy, at full energy executing a full recirculation to the second linac using a path length that is substantially an odd half-integer of the RF wavelength, and then decelerating the beam using the linacs and downgoing arcs.

  2. Method of recovering adsorbed liquid compounds from molecular sieve columns

    DOE Patents [OSTI]

    Burkholder, Harvey R.; Fanslow, Glenn E.

    1983-01-01

    Molecularly adsorbed volatile liquid compounds are recovered from molecular sieve adsorbent columns by directionally applying microwave energy to the bed of the adsorbent to produce a mixed liquid-gas effluent. The gas portion of the effluent generates pressure within the bed to promote the discharge of the effluent from the column bottoms. Preferably the discharged liquid-gas effluent is collected in two to three separate fractions, the second or intermediate fraction having a substantially higher concentration of the desorbed compound than the first or third fractions. The desorption does not need to be assisted by passing a carrier gas through the bed or by applying reduced pressure to the outlet from the bed.

  3. Innovative Elution Processes for Recovering Uranium from Seawater

    SciTech Connect (OSTI)

    Wai, Chien; Tian, Guoxin; Janke, Christopher

    2014-05-29

    Utilizing amidoxime-based polymer sorbents for extraction of uranium from seawater has attracted considerable interest in recent years. Uranium collected in the sorbent is recovered typically by elution with an acid. One drawback of acid elution is deterioration of the sorbent which is a significant factor that limits the economic competitiveness of the amidoxime-based sorbent systems for sequestering uranium from seawater. Developing innovative elution processes to improve efficiency and to minimize loss of sorbent capacity become essential in order to make this technology economically feasible for large-scale industrial applications. This project has evaluated several elution processes including acid elution, carbonate elution, and supercritical fluid elution for recovering uranium from amidoxime-based polymer sorbents. The elution efficiency, durability and sorbent regeneration for repeated uranium adsorption- desorption cycles in simulated seawater have been studied. Spectroscopic techniques are used to evaluate chemical nature of the sorbent before and after elution. A sodium carbonate-hydrogen peroxide elution process for effective removal of uranium from amidoxime-based sorbent is developed. The cause of this sodium carbonate and hydrogen peroxide synergistic leaching of uranium from amidoxime-based sorbent is attributed to the formation of an extremely stable uranyl peroxo-carbonato complex. The efficiency of uranium elution by the carbonate-hydrogen peroxide method is comparable to that of the hydrochloric acid elution but damage to the sorbent material is much less for the former. The carbonate- hydrogen peroxide elution also does not need any elaborate step to regenerate the sorbent as those required for hydrochloric acid leaching. Several CO2-soluble ligands have been tested for extraction of uranium from the sorbent in supercritical fluid carbon dioxide. A mixture of hexafluoroacetylacetone and tri-n-butylphosphate shows the best result but uranium

  4. ARM - Point Reyes News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CaliforniaPoint Reyes News Point Reyes Deployment AMF Home Point Reyes Home Data Plots and Baseline Instruments Experiment Planning MASRAD Proposal Abstract and Related Campaigns Outreach Posters Climate Research at Point Reyes National Seashore (horizontal) Climate Research at Point Reyes National Seashore (vertical) News Campaign Images Point Reyes News From Coastal Clouds to Desert Dust: ARM Mobile Facility Headed to Africa September 30, 2005 New Data Streams Available for ARM Mobile Facility

  5. PROCESSES FOR SEPARATING AND RECOVERING CONSTITUENTS OF NEUTRON IRRADIATED URANIUM

    DOE Patents [OSTI]

    Connick, R.E.; Gofman, J.W.; Pimentel, G.C.

    1959-11-10

    Processes are described for preparing plutonium, particularly processes of separating plutonium from uranium and fission products in neutron-irradiated uraniumcontaining matter. Specifically, plutonium solutions containing uranium, fission products and other impurities are contacted with reducing agents such as sulfur dioxide, uranous ion, hydroxyl ammonium chloride, hydrogen peroxide, and ferrous ion whereby the plutoninm is reduced to its fluoride-insoluble state. The reduced plutonium is then carried out of solution by precipitating niobic oxide therein. Uranium and certain fission products remain behind in the solution. Certain other fission products precipitate along with the plutonium. Subsequently, the plutonium and fission product precipitates are redissolved, and the solution is oxidized with oxidizing agents such as chlorine, peroxydisulfate ion in the presence of silver ion, permanganate ion, dichromate ion, ceric ion, and a bromate ion, whereby plutonium is oxidized to the fluoride-soluble state. The oxidized solution is once again treated with niobic oxide, thus precipitating the contamirant fission products along with the niobic oxide while the oxidized plutonium remains in solution. Plutonium is then recovered from the decontaminated solution.

  6. Nuclear power fleets and uranium resources recovered from phosphates

    SciTech Connect (OSTI)

    Gabriel, S.; Baschwitz, A.; Mathonniere, G.

    2013-07-01

    Current light water reactors (LWR) burn fissile uranium, whereas some future reactors, as Sodium fast reactors (SFR) will be capable of recycling their own plutonium and already-extracted depleted uranium. This makes them a feasible solution for the sustainable development of nuclear energy. Nonetheless, a sufficient quantity of plutonium is needed to start up an SFR, with the plutonium already being produced in light water reactors. The availability of natural uranium therefore has a direct impact on the capacity of the reactors (both LWR and SFR) that we can build. It is therefore important to have an accurate estimate of the available uranium resources in order to plan for the world's future nuclear reactor fleet. This paper discusses the correspondence between the resources (uranium and plutonium) and the nuclear power demand. Sodium fast reactors will be built in line with the availability of plutonium, including fast breeders when necessary. Different assumptions on the global uranium resources are taken into consideration. The largely quoted estimate of 22 Mt of uranium recovered for phosphate rocks can be seriously downscaled. Based on our current knowledge of phosphate resources, 4 Mt of recoverable uranium already seems to be an upper bound value. The impact of the downscaled estimate on the deployment of a nuclear fleet is assessed accordingly. (authors)

  7. Floating Point Control Library

    Energy Science and Technology Software Center (OSTI)

    2007-08-02

    Floating Point Control is a Library that allows for the manipulation of floating point unit exception masking funtions control exceptions in both the Streaming "Single Instruction, Multiple Data" Extension 2 (SSE2) unit and the floating point unit simultaneously. FPC also provides macros to set floating point rounding and precision control.

  8. Effects of zebra mussels, obtained from Lake Erie and St Lawrence River, as a food source on immune system of lesser scaup

    SciTech Connect (OSTI)

    Flipo, D.; Fournier, M.; Beaulieu, C.; Tessier, C.

    1995-12-31

    A feeding study was undertaken to assess the influence of a zebra mussel diet from Lake Erie and the St.Lawrence river on the immune system of lesser scaup. The Great lakes and the St.Lawrence river are known to be among the most contaminated waters found in the country. Analytical studies have shown that zebra mussels are contaminated by organochlorines and other pollutants. The occurrence of these toxicants in the food diet of lesser scaup can cause serious injuries. The immune system, in its capacity to destroy foreign particles and protect the host against diseases, can serve as a useful sentinel of the health status of these environmentally stressed organisms. Immune parameters of lesser scaup fed with zebra mussels from Lake Erie or the St. Lawrence river were evaluated. The duration of the feeding trial was nine weeks. Phagocytic activity and oxidative bursts of heterophils were evaluated by flow cytometry. Intracellular thiol levels of lymphocytes and heterophils were also determined by flow cytometry. The results showed a dimunition of phagocytic activity and bactericidal potential after 6 weeks of the zebra mussel diet compared to the control. These results may be associated with pathology problems encountered in treated groups at the end of the diet. Birds from the St. Lawrence River group (40%) and the Lake Erie group (40%) demonstrated variable degrees of pododermatitis compared to the control group. The intracellular level of thiol was consistently found to be elevated in lymphocytes and heterophyls from birds feeding with on the St. Lawrence River. In conclusion, flow cytometry assays like phagocytosis, oxidative burst and thiol staining can serve as biomarkers of the immune status of birds and can give important information for evaluating the health of birds exposed to environmental contamination.

  9. PowerPoint Presentation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LOW TEMPERATURE STIRLING ENGINE FOR GEOTHERMAL ELECTRICITY GENERATION Department of Energy Phase II SBIR Grant DE-SC0008215 Principal Investigator: Samuel P. Weaver Introduction Oilfield operations have multiple opportunities to recover wasted thermal energy to generate electricity. While technologies currently exist to do so, improved efficiency at smaller scale would improve the economics and performance, and open additional opportunities for waste heat recovery (WHR). Cool Energy is building

  10. Energy Recovered Light Source Technology at TJNAF | U.S. DOE...

    Office of Science (SC) Website

    Contact Information Nuclear Physics U.S. Department of Energy SC-26Germantown Building ... Applications of Nuclear Science Archives Energy Recovered Light Source Technology at TJNAF ...

  11. Use a Vent Condenser to Recover Flash Steam Energy, Energy Tips...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 Use a Vent Condenser to Recover Flash Steam Energy When the pressure of saturated ... tanks and deaerators for excessive flash steam plumes. Reexamine deaerator ...

  12. End Points Specification Methods

    Office of Energy Efficiency and Renewable Energy (EERE)

    Two methods to develop end point specifications are presented. These have evolved from use in the field for deactivation projects.

  13. IMPROVING CO2 EFFICIENCY FOR RECOVERING OIL IN HETEROGENEOUS RESERVOIRS

    SciTech Connect (OSTI)

    Reid B. Grigg; Robert K. Svec

    2002-12-20

    This document is the First Annual Report for the U.S. Department of Energy under contract No., a three-year contract entitled: ''Improving CO{sub 2} Efficiency for Recovering Oil in Heterogeneous Reservoirs.'' The research improved our knowledge and understanding of CO{sub 2} flooding and includes work in the areas of injectivity and mobility control. The bulk of this work has been performed by the New Mexico Petroleum Recovery Research Center, a research division of New Mexico Institute of Mining and Technology. This report covers the reporting period of September 28, 2001 and September 27, 2002. Injectivity continues to be a concern to the industry. During this period we have contacted most of the CO{sub 2} operators in the Permian Basin and talked again about their problems in this area. This report has a summary of what we found. It is a given that carbonate mineral dissolution and deposition occur in a formation in geologic time and are expected to some degree in carbon dioxide (CO{sub 2}) floods. Water-alternating-gas (WAG) core flood experiments conducted on limestone and dolomite core plugs confirm that these processes can occur over relatively short time periods (hours to days) and in close proximity to each other. Results from laboratory CO{sub 2}-brine flow experiments performed in rock core were used to calibrate a reactive transport simulator. The calibrated model is being used to estimate in situ effects of a range of possible sequestration options in depleted oil/gas reservoirs. The code applied in this study is a combination of the well known TOUGH2 simulator, for coupled groundwater/brine and heat flow, with the chemistry code TRANS for chemically reactive transport. Variability in response among rock types suggests that CO{sub 2} injection will induce ranges of transient and spatially dependent changes in intrinsic rock permeability and porosity. Determining the effect of matrix changes on CO{sub 2} mobility is crucial in evaluating the efficacy

  14. Electrochemical performance studies of MnO{sub 2} nanoflowers recovered from spent battery

    SciTech Connect (OSTI)

    Ali, Gomaa A.M.; Tan, Ling Ling; Jose, Rajan; Yusoff, Mashitah M.; Chong, Kwok Feng

    2014-12-15

    Highlights: MnO{sub 2} is recovered from spent zinccarbon batteries as nanoflowers structure. Recovered MnO{sub 2} nanoflowers show high specific capacitance. Recovered MnO{sub 2} nanoflowers show stable electrochemical cycling up to 900 cycles. Recovered MnO{sub 2} nanoflowers show low resistance in EIS data. - Abstract: The electrochemical performance of MnO{sub 2} nanoflowers recovered from spent household zinccarbon battery is studied by cyclic voltammetry, galvanostatic charge/discharge cycling and electrochemical impedance spectroscopy. MnO{sub 2} nanoflowers are recovered from spent zinccarbon battery by combination of solution leaching and electrowinning techniques. In an effort to utilize recovered MnO{sub 2} nanoflowers as energy storage supercapacitor, it is crucial to understand their structure and electrochemical performance. X-ray diffraction analysis confirms the recovery of MnO{sub 2} in birnessite phase, while electron microscopy analysis shows the MnO{sub 2} is recovered as 3D nanostructure with nanoflower morphology. The recovered MnO{sub 2} nanoflowers exhibit high specific capacitance (294 F g{sup ?1} at 10 mV s{sup ?1}; 208.5 F g{sup ?1} at 0.1 A g{sup ?1}) in 1 M Na{sub 2}SO{sub 4} electrolyte, with stable electrochemical cycling. Electrochemical data analysis reveal the great potential of MnO{sub 2} nanoflowers recovered from spent zinccarbon battery in the development of high performance energy storage supercapacitor system.

  15. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    optic links will replace many hardwire connections - Remotely programmable set-points and monitoring for each klystron cart - Klystron collector over-temperature protection will...

  16. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    disease biomarkers in human biological samples * Point-of-Care diagnostics amenable to health clinics and field sensing applications * Integrated miniaturized electronics, optical...

  17. DOE Announces Three Projects to Help the Gulf Coast Recover and Rebuild |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Three Projects to Help the Gulf Coast Recover and Rebuild DOE Announces Three Projects to Help the Gulf Coast Recover and Rebuild January 20, 2006 - 10:52am Addthis ROBINSONVILLE, MS - Energy Secretary Samuel W. Bodman today announced three Department of Energy (DOE) initiatives to help the people in the Gulf coast region recover from the hurricanes in 2005, as well as prevent loss of life and damage in the future. During his speech to the Energy Leadership Forum, the

  18. Opportunity Analysis for Recovering Energy from Industrial Waste Heat and Emissions

    SciTech Connect (OSTI)

    Viswanathan, V. V.; Davies, R. W.; Holbery, J.

    2006-04-01

    This report analyzes the opportunity to recover chemical emissions and thermal emissions from U.S. industry. It also analyzes the barriers and pathways to more effectively capitalize on these opportunities.

  19. Use a Vent Condenser to Recover Flash Steam Energy - Steam Tip Sheet #13

    SciTech Connect (OSTI)

    2012-01-31

    This revised AMO tip sheet on vent condenser to recover flash steam energy provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  20. Use Vapor Recompression to Recover Low-Pressure Waste - Steam Tip Sheet #11

    SciTech Connect (OSTI)

    2012-01-31

    This revised AMO tip sheet on recovering low-pressure waste steam provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  1. Use Vapor Recompression to Recover Low-Pressure Waste Steam (Revised0

    SciTech Connect (OSTI)

    Not Available

    2008-03-01

    This revised ITP tip sheet on recovering low-pressure waste steam provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  2. Material Point Methods

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Material Point Methods and Multiphysics for Fracture and Multiphase Problems Joseph Teran, UCLA and Alice Koniges, LBL Contact: jteran@math.ucla.edu Material point methods (MPM) provide an intriguing new path for the design of algorithms that are poised to scale to billions of cores [4]. These methods are particularly important for simulating various phases in the presence of extreme deformation and topological change. This brings about the possibility of new simulations enabled at the exascale

  3. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Microneedles for medical point of care diagnostics and drug delivery Ronen Polsky Department of Biosensors and Nanomaterials February 25, 2015 Sandia MedTech Showcase Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000. SAND2015-1388C Brief Technology Overview Wearable Point of

  4. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Coupling Between Oceanic Upwelling and Cloud Coupling Between Oceanic Upwelling and Cloud - - Aerosol Properties Aerosol Properties at the AMF Point Reyes Site at the AMF Point Reyes Site Maureen Dunn , Mike Jensen , Pavlos Kollias , Mark Miller , Peter Daum Mary Jane Bartholomew , David Turner , Elisabeth Andrews and Anne Jefferson Introduction Ground based observations from the MASRAD, Pt. Reyes AMF July 1-Sept 15, 2005 indicate a relationship between coastal marine stratus cloud properties,

  5. Method for recovering palladium and technetium values from nuclear fuel reprocessing waste solutions

    DOE Patents [OSTI]

    Horwitz, E. Philip; Delphin, Walter H.

    1979-07-24

    A method for recovering palladium and technetium values from nuclear fuel reprocessing waste solutions containing these and other values by contacting the waste solution with an extractant of tricaprylmethylammonium nitrate in an inert hydrocarbon diluent which extracts the palladium and technetium values from the waste solution. The palladium and technetium values are recovered from the extractant and from any other coextracted values with a strong nitric acid strip solution.

  6. Energy Department Awards Up to $4 Million for Projects to Recover Critical

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Materials from Geothermal Fluids | Department of Energy Awards Up to $4 Million for Projects to Recover Critical Materials from Geothermal Fluids Energy Department Awards Up to $4 Million for Projects to Recover Critical Materials from Geothermal Fluids May 24, 2016 - 10:30am Addthis The Energy Department today announced four research and development (R&D) projects in California, Utah, Washington, and Wyoming that will receive up to $4 million in total funding to assess the occurrence of

  7. Points of Contact - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Points of Contact About Us Hanford Site Solid Waste Acceptance Program What's New Acceptance Criteria Acceptance Process Tools Points of Contact Points of Contact Email Email Page...

  8. Bayer Material Science (TRL 1 2 3 System)- River Devices to Recover Energy with Advanced Materials(River DREAM)

    Broader source: Energy.gov [DOE]

    Bayer Material Science (TRL 1 2 3 System) - River Devices to Recover Energy with Advanced Materials(River DREAM)

  9. Precision Pointing System Development

    SciTech Connect (OSTI)

    BUGOS, ROBERT M.

    2003-03-01

    The development of precision pointing systems has been underway in Sandia's Electronic Systems Center for over thirty years. Important areas of emphasis are synthetic aperture radars and optical reconnaissance systems. Most applications are in the aerospace arena, with host vehicles including rockets, satellites, and manned and unmanned aircraft. Systems have been used on defense-related missions throughout the world. Presently in development are pointing systems with accuracy goals in the nanoradian regime. Future activity will include efforts to dramatically reduce system size and weight through measures such as the incorporation of advanced materials and MEMS inertial sensors.

  10. Appendix B - Control Points

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    B B Control Points B.1 Injector Control Points Qty Type Device 2 Magnet Bend magnet - DL1 bend 9 Magnet Quad magnet 10 Magnet X-Y Corrector Pair 2 Magnet Solenoid 2 Magnet Spectrometer 1 RF Gun 2 RF Accelerating Structure 1 RF Transverse RF Structure 1 TIMING Timing/Trigger System 1 Laser Gun Laser 1 Laser Alignment Laser 13 DIAG BPM 4 DIAG Wire Scanner 11 DIAG Profile Monitor 3 DIAG Toroid 1 DIAG Transverse RF BL Monitor 3 DIAG Faraday Cup 1 DIAG Energy Collimator 1 DIAG Tune-up Dump 1 VAC

  11. MountPointAttributes

    Energy Science and Technology Software Center (OSTI)

    2001-06-16

    MountPointAttributes is a software component that provides client code with a technique to raise the local namespace of a file to a global namespace. Its abstractions and mechanisms allow the client code to gather global properties of a file and to use them in devising an effective storage access strategy on this file.

  12. EndPoints 2000

    Energy Science and Technology Software Center (OSTI)

    2009-08-13

    The application leads the user through a logical framework to determine the minimum effort and cost necessary to reach the desired end state for each space, system, and facility. Endpoints are used to plan the project work, track and manage the determination, management, verification, and closure of D&D endpoints, consistent with DOE End Point guidance documents.

  13. PowerPoint Presentation

    Broader source: Energy.gov (indexed) [DOE]

    John Nangle, National Renewable Energy Laboratory (NREL) Tribal Leader Forum, Phoenix, AZ - May 30 - 31, 2013 State Incentives and Project Impacts Main Points - Market Context * State Renewable Portfolio Standards (RPS) - What are they? - How can they help your project? - Potential gap means more market demand for RE projects Starting a Renewable Energy Project * What renewable resources exist? * What sites with resources do you own? * To whom will you sell the electricity? * How will federal

  14. PowerPoint Presentation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    John Nangle, National Renewable Energy Laboratory (NREL) Tribal Leader Forum, Phoenix, AZ - May 30 - 31, 2013 State Incentives and Project Impacts Main Points - Market Context * State Renewable Portfolio Standards (RPS) - What are they? - How can they help your project? - Potential gap means more market demand for RE projects Starting a Renewable Energy Project * What renewable resources exist? * What sites with resources do you own? * To whom will you sell the electricity? * How will federal

  15. Strategic Focus Points

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Focus Points June 2011 1. Establish the human capital and organizational foundation to create a high-performing organization. 2. Implement a cyber risk-management and incident response program that ensures effective security of Federal and M&O networks, provides appropriate flexibility, and meets legal requirements and OMB expectations. 3. Improve IT Services (EITS) into a best-in-class provider from both a technical and business perspective. 4. Implement and institutionalize a reformed,

  16. PowerPoint Presentation

    U.S. Energy Information Administration (EIA) Indexed Site

    Utica Shale Update Scott Kell Assistant Chief, Division of Oil & Gas Resources Management Ohio Department of Natural Resources Horizontal Well Activity Activity Trends Agency Progress Emerging Issues Horizontal Well Permitting 0 200 400 600 800 1000 1200 1400 1600 '06 '07 '08 '09 '10 '11 '12 '13 '14 '15 Year Utica Permits Permits Issued Well Drilling Horizontal Well Drilling by Year: 2011 - 64 2012 - 135 2013 - 526 2014 - 764 Horizontal Rig Count Horizontal Utica - Point Pleasant Well

  17. New Orleans Schools Recover from Hurricane Katrina with Assistance from DOE

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and NREL | Department of Energy Orleans Schools Recover from Hurricane Katrina with Assistance from DOE and NREL New Orleans Schools Recover from Hurricane Katrina with Assistance from DOE and NREL June 17, 2014 - 11:42am Addthis The solar installation at Warren Easton Senior High School was the first of four installations placed on local schools as part of Solar Schools Initiative program. At 28 kW of thin-film, it is the largest installation in the city of New Orleans. | Photo by Garrett

  18. Methods for recovering a polar solvent from a fluid stream contaminated

    Office of Scientific and Technical Information (OSTI)

    with at least one polar impurity (Patent) | SciTech Connect Patent: Methods for recovering a polar solvent from a fluid stream contaminated with at least one polar impurity Citation Details In-Document Search Title: Methods for recovering a polar solvent from a fluid stream contaminated with at least one polar impurity A method of removing a polar solvent from a fluid volume contaminated with at least one polar impurity, such as a free fatty acid, is provided. The method comprises providing

  19. Methods for recovering a solvent from a fluid volume and methods of

    Office of Scientific and Technical Information (OSTI)

    removing at least one compound from a nonpolar solvent (Patent) | SciTech Connect Patent: Methods for recovering a solvent from a fluid volume and methods of removing at least one compound from a nonpolar solvent Citation Details In-Document Search Title: Methods for recovering a solvent from a fluid volume and methods of removing at least one compound from a nonpolar solvent A method of removing a nonpolar solvent from a fluid volume that includes at least one nonpolar compound, such as a

  20. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    RapiDx Victoria VanderNoot, Ph.D. February 25, 2015 Sandia MedTech Showcase Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000. SAND2015-1392C Brief Technology Overview - RapiDx Rapid, Automated Point-of-Care System (RapiDx) * Portable microfluidic in vitro diagnostic instrument

  1. PowerPoint Presentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Automated Prep of Nucleic Acids from Blood for Point-of-Care Applications Steven S. Branda Principal Member of Technical Staff February 25, 2015 Sandia MedTech Showcase Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000. SAND2015-1389C Technology Overview * Platform for automated

  2. Method to separate and recover oil and plastic from plastic contaminated with oil

    DOE Patents [OSTI]

    Smith, H.M.; Bohnert, G.W.; Olson, R.B.; Hand, T.E.

    1998-01-27

    The present invention provides a method to separate and recover oils and recyclable plastic from plastic contaminated with oil. The invention utilizes the different solubility of oil in a liquid or supercritical fluid as compared to a gas to effect separation of the oil from the plastic. 3 figs.

  3. Method to separate and recover oil and plastic from plastic contaminated with oil

    DOE Patents [OSTI]

    Smith, Henry M.; Bohnert, George W.; Olson, Ronald B.; Hand, Thomas E.

    1998-01-27

    The present invention provides a method to separate and recover oils and recyclable plastic from plastic contaminated with oil. The invention utilizes the different solubility of oil in as liquid or supercritical fluid as compared to a gas to effect separation of the oil from the plastic.

  4. Chloride-free processing of aluminum scrap to recover by-product materials

    SciTech Connect (OSTI)

    Riley, W.D.; Jong, B.W.

    1995-12-31

    The US Bureau of Mines has developed technology to recover by-product materials from aluminum scrap using engineered scavenger compounds (ESC). ESCs are structural oxides with a channel or tunnel structure that allows them to hold ions of a specific sizes and charges. The scavenging reaction is easily reversible allowing the ESC to be recharged for continued use and the ion is recovered as an electrodeposit. Key features of this novel technology are: (a) ESC systems are designed to have a high degree of selectivity for a desired ionic species. (b) The recovered material requires little or no additional reprocessing prior to reuse. Two current uses for the ESC technology that are described in this paper are the removal and recycle of lithium (Li) from lithium aluminum (Li-Al) alloys; and, using ESCs as a replacement for the conventional demaging (magnesium removal) technology used by the secondary casting industry. Research indicates that the ESC technology proposed for both these applications has either distinct economic and/or environmental advantages over previously employed methods of recovering metal values from aluminum scrap.

  5. Capital Point | Open Energy Information

    Open Energy Info (EERE)

    Point Jump to: navigation, search Name: Capital Point Place: Israel Sector: Services Product: General Financial & Legal Services ( Joint Venture Consortium ) References: Capital...

  6. Using compressive sensing to recover images from PET scanners with partial detector rings

    SciTech Connect (OSTI)

    Valiollahzadeh, SeyyedMajid; Clark, John W.; Mawlawi, Osama

    2015-01-15

    Purpose: Most positron emission tomography/computed tomography (PET/CT) scanners consist of tightly packed discrete detector rings to improve scanner efficiency. The authors’ aim was to use compressive sensing (CS) techniques in PET imaging to investigate the possibility of decreasing the number of detector elements per ring (introducing gaps) while maintaining image quality. Methods: A CS model based on a combination of gradient magnitude and wavelet domains (wavelet-TV) was developed to recover missing observations in PET data acquisition. The model was designed to minimize the total variation (TV) and L1-norm of wavelet coefficients while constrained by the partially observed data. The CS model also incorporated a Poisson noise term that modeled the observed noise while suppressing its contribution by penalizing the Poisson log likelihood function. Three experiments were performed to evaluate the proposed CS recovery algorithm: a simulation study, a phantom study, and six patient studies. The simulation dataset comprised six disks of various sizes in a uniform background with an activity concentration of 5:1. The simulated image was multiplied by the system matrix to obtain the corresponding sinogram and then Poisson noise was added. The resultant sinogram was masked to create the effect of partial detector removal and then the proposed CS algorithm was applied to recover the missing PET data. In addition, different levels of noise were simulated to assess the performance of the proposed algorithm. For the phantom study, an IEC phantom with six internal spheres each filled with F-18 at an activity-to-background ratio of 10:1 was used. The phantom was imaged twice on a RX PET/CT scanner: once with all detectors operational (baseline) and once with four detector blocks (11%) turned off at each of 0 °, 90 °, 180 °, and 270° (partially sampled). The partially acquired sinograms were then recovered using the proposed algorithm. For the third test, PET images

  7. Industrial recovered-materials-utilization targets for the metals and metal-products industry

    SciTech Connect (OSTI)

    1980-03-01

    The National Energy Conservation Policy Act of 1978 directs DOE to set targets for increased utilization of energy-saving recovered materials for certain industries. These targets are to be established at levels representing the maximum feasible increase in utilization of recovered materials that can be achieved progressively by January 1, 1987 and is consistent with technical and economic factors. A benefit to be derived from the increased use of recoverable materials is in energy savings, as state in the Act. Therefore, emhasis on different industries in the metals sector has been related to their energy consumption. The ferrous industry (iron and steel, ferrour foundries and ferralloys), as defined here, accounts for approximately 3%, and all others for the remaining 3%. Energy consumed in the lead and zinc segments is less than 1% each. Emphasis is placed on the ferrous scrap users, followed by the aluminum and copper industries. A bibliography with 209 citations is included.

  8. Method of removing and recovering elemental sulfur from highly reducing gas streams containing sulfur gases

    DOE Patents [OSTI]

    Gangwal, Santosh K.; Nikolopoulos, Apostolos A.; Dorchak, Thomas P.; Dorchak, Mary Anne

    2005-11-08

    A method is provided for removal of sulfur gases and recovery of elemental sulfur from sulfur gas containing supply streams, such as syngas or coal gas, by contacting the supply stream with a catalyst, that is either an activated carbon or an oxide based catalyst, and an oxidant, such as sulfur dioxide, in a reaction medium such as molten sulfur, to convert the sulfur gases in the supply stream to elemental sulfur, and recovering the elemental sulfur by separation from the reaction medium.

  9. Energy Recovered Light Source Technology at TJNAF | U.S. DOE Office of

    Office of Science (SC) Website

    Science (SC) Recovered Light Source Technology at TJNAF Nuclear Physics (NP) NP Home About Research Facilities Science Highlights Benefits of NP Applications of Nuclear Science Applications of Nuclear Science Archives Small Business Innovation Research / Small Business Technology Transfer Funding Opportunities Nuclear Science Advisory Committee (NSAC) Community Resources Contact Information Nuclear Physics U.S. Department of Energy SC-26/Germantown Building 1000 Independence Ave., SW

  10. NNSA Partners With Russia to Recover Material That Could Be Used in Dirty

    National Nuclear Security Administration (NNSA)

    Bombs | National Nuclear Security Administration | (NNSA) Partners With Russia to Recover Material That Could Be Used in Dirty Bombs November 07, 2013 WASHINGTON, D.C. - The Department of Energy's (DOE) National Nuclear Security Administration (NNSA), in partnership with the Russian Federation, has successfully completed the removal of 14 Russian radioisotope thermoelectric generators (RTGs) from the Northern Sea Route. These devices, which contain high-activity radioactive sources, powered

  11. Method and apparatus for recovering hydrogen from a feed comprising methane, ethylene, hydrogen and acetylene

    SciTech Connect (OSTI)

    O'Reilly, R.

    1985-01-08

    Hydrogen is recovered from a feed comprising methane, ethylene, hydrogen and acetylene by first cooling the feed and then scrubbing the cooled feed with a scrubbing liquid selected from the group consisting of liquid ethylene, liquid propane, liquid ethane and mixtures thereof to remove substantially all the acetylene. The scrubbed gas is then further cooled to condense the methane and ethylene leaving gaseous hydrogen as product.

  12. END POINTS SPECIFICATION METHODS End Points Specification Methods

    Office of Environmental Management (EM)

    SPECIFICATION METHODS End Points Specification Methods Hierarchical End-Points Method Checklist End-Points Method Two methods to develop end point specifications are presented. These have evolved from use in the field for deactivation projects.  The hierarchical method is systematic, comprehensive, and completely defensible as to the basis for each specification. This method may appear complex to the uninitiated, but it is a straightforward application of a systematic engineering approach. It

  13. Abundance of {sup 14}C in biomass fractions of wastes and solid recovered fuels

    SciTech Connect (OSTI)

    Fellner, Johann Rechberger, Helmut

    2009-05-15

    In recent years thermal utilization of mixed wastes and solid recovered fuels has become of increasing importance in European waste management. Since wastes or solid recovered fuels are generally composed of fossil and biogenic materials, only part of the CO{sub 2} emissions is accounted for in greenhouse gas inventories or emission trading schemes. A promising approach for determining this fraction is the so-called radiocarbon method. It is based on different ratios of the carbon isotopes {sup 14}C and {sup 12}C in fossil and biogenic fuels. Fossil fuels have zero radiocarbon, whereas biogenic materials are enriched in {sup 14}C and reflect the {sup 14}CO{sub 2} abundance of the ambient atmosphere. Due to nuclear weapons tests in the past century, the radiocarbon content in the atmosphere has not been constant, which has resulted in a varying {sup 14}C content of biogenic matter, depending on the period of growth. In the present paper {sup 14}C contents of different biogenic waste fractions (e.g., kitchen waste, paper, wood), as well as mixtures of different wastes (household, bulky waste, and commercial waste), and solid recovered fuels are determined. The calculated {sup 14}C content of the materials investigated ranges between 98 and 135 pMC.

  14. AMF Deployment, Point Reyes National Seashore, California

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    California Point Reyes Deployment AMF Home Point Reyes Home Data Plots and Baseline ... AMF Deployment, Point Reyes National Seashore, California Point Reyes National Seashore, ...

  15. Point Bio Energy LLC | Open Energy Information

    Open Energy Info (EERE)

    Point Bio Energy LLC Jump to: navigation, search Name: Point Bio Energy LLC Place: La Pointe, Wisconsin Product: Wisconsin-based wood fuel pellet producer. References: Point Bio...

  16. Sequential pyrolysis of plastic to recover polystyrene, HCl and terephthalic acid

    DOE Patents [OSTI]

    Evans, R.J.; Chum, H.L.

    1995-11-07

    A process is described for pyrolyzing plastic waste feed streams containing polyvinyl chloride, polyethylene terephthalate, polystyrene and polyethylene to recover polystyrene, HCl and terephthalic acid comprising: heating the plastic waste feed stream to a first temperature; adding an acid or base catalyst on an oxide or carbonate support; heating the plastic waste feed stream to pyrolyze polyethylene terephthalate and polyvinyl chloride; separating terephthalic acid or HCl; heating to a second temperature to pyrolyze polystyrene; separating styrene; heating the waste feed stream to a third temperature to pyrolyze polyethylene; and separating hydrocarbons. 83 figs.

  17. Evaluation of products recovered from scrap tires for use as asphalt modifiers

    SciTech Connect (OSTI)

    McKay, J.

    1992-05-01

    Western Research Institute performed rheological tests and water sensitivity tests on asphalt cements that had been modified with carbonous residues obtained from the pyrolysis of scrap tires and waste motor oil. These tests are part of an ongoing program at the University of Wyoming Chemical Engineering Department to evaluate, as asphalt additives, solid carbonous products recovered from the scrap tire and waste motor oil pyrolysis experiments conducted at the University. The tests showed that carbonous residues increased the viscosity and decreased the elasticity of AC-10 and AC-20 asphalts. The tests also indicatedthat asphalt cements modified with carbonous residues were less sensitive to water damage and age embrittlement than unmodified asphalt cements.

  18. Salt-soda sinter process for recovering aluminum from fly ash

    DOE Patents [OSTI]

    McDowell, W.J.; Seeley, F.G.

    A method for recovering aluminum values from fly ash comprises sintering the fly ash with a mixture of NaCl and Na/sub 2/CO/sub 3/ to a temperature in the range 700/sup 0/ to 900/sup 0/C for a period of time sufficient to convert greater than 90% of the aluminum content of the fly ash into an acidsoluble fraction and then contacting the thus-treated fraction with an aqueous solution of nitric or sulfuric acid to effect dissolution of aluminum and other metal values in said solution.

  19. Salt-soda sinter process for recovering aluminum from fly ash

    DOE Patents [OSTI]

    McDowell, William J.; Seeley, Forest G.

    1981-01-01

    A method for recovering aluminum values from fly ash comprises sintering the fly ash with a mixture of NaCl and Na.sub.2 CO.sub.3 to a temperature in the range 700.degree.-900.degree. C. for a period of time sufficient to convert greater than 90% of the aluminum content of the fly ash into an acid-soluble fraction and then contacting the thus-treated fraction with an aqueous solution of nitric or sulfuric acid to effect dissolution of aluminum and other metal values in said solution.

  20. Heritable Genetic Changes in Cells Recovered From Irradiated 3D Tissue Constructs

    SciTech Connect (OSTI)

    Michael Cornforth

    2012-03-26

    Combining contemporary cytogenetic methods with DNA CGH microarray technology and chromosome flow-sorting increases substantially the ability to resolve exchange breakpoints associated with interstitial deletions and translocations, allowing the consequences of radiation damage to be directly measured at low doses, while also providing valuable insights into molecular mechanisms of misrepair processes that, in turn, identify appropriate biophysical models of risk at low doses. Specific aims apply to cells recovered from 3D tissue constructs of human skin and, for the purpose of comparison, the same cells irradiated in traditional 2D cultures. The project includes research complementary to NASA/HRP space radiation project.

  1. Method for recovering catalytic elements from fuel cell membrane electrode assemblies

    DOE Patents [OSTI]

    Shore, Lawrence; Matlin, Ramail; Heinz, Robert

    2012-06-26

    A method for recovering catalytic elements from a fuel cell membrane electrode assembly is provided. The method includes converting the membrane electrode assembly into a particulate material, wetting the particulate material, forming a slurry comprising the wetted particulate material and an acid leachate adapted to dissolve at least one of the catalytic elements into a soluble catalytic element salt, separating the slurry into a depleted particulate material and a supernatant containing the catalytic element salt, and washing the depleted particulate material to remove any catalytic element salt retained within pores in the depleted particulate material.

  2. Sequential pyrolysis of plastic to recover polystyrene HCL and terephthalic acid

    DOE Patents [OSTI]

    Evans, Robert J. (Lakewood, CO); Chum, Helena L. (Arvada, CO)

    1995-01-01

    A process of pyrolyzing plastic waste feed streams containing polyvinyl chloride, polyethylene terephthalate, polystyrene and polyethylene to recover polystyrene HCl and terephthalic acid comprising: heating the plastic waste feed stream to a first temperature; adding an acid or base catalyst on an oxide or carbonate support; heating the plastic waste feed stream to pyrolyze polyethylene terephthalate and polyvinyl chloride; separating terephthalic acid or HCl; heating to a second temperature to pyrolyze polystyrene; separating styrene; heating the waste feed stream to a third temperature to pyrolyze polyethylene; and separating hydrocarbons.

  3. Salt-soda sinter process for recovering aluminum from fly ash

    SciTech Connect (OSTI)

    Mcdowell, W.J.; Seeley, F.G.

    1981-03-03

    A method for recovering aluminum values from fly ash comprises sintering the fly ash with a mixture of NaCl and Na2CO3 to a temperature in the range 700*-900* C for a period of time sufficient to convert greater than 90% of the aluminum content of the fly ash into an acid-soluble fraction and then contacting the thus-treated fraction with an aqueous solution of nitric or sulfuric acid to effect dissolution of aluminum and other metal values in said solution.

  4. Method and apparatus for recovering a gas from a gas hydrate located on the ocean floor

    DOE Patents [OSTI]

    Wyatt, Douglas E.

    2001-01-01

    A method and apparatus for recovering a gas from a gas hydrate on the ocean floor includes a flexible cover, a plurality of steerable base members secured to the cover, and a steerable mining module. A suitable source for inflating the cover over the gas hydrate deposit is provided. The mining module, positioned on the gas hydrate deposit, is preferably connected to the cover by a control cable. A gas retrieval conduit or hose extends upwardly from the cover to be connected to a support ship on the ocean surface.

  5. FIELD DEMONSTRATION OF A MEMBRANE PROCESS TO RECOVER HEAVY HYDROCARBONS AND TO REMOVE WATER FROM NATURAL GAS

    SciTech Connect (OSTI)

    Unknown

    2002-04-10

    The objective of this project is to design, construct and field demonstrate a 3-MMscfd membrane system to recover natural gas liquids (NGL) and remove water from raw natural gas. The gas processed by the membrane system will meet pipeline specifications for dew point and Btu value, and the process is likely to be significantly less expensive than glycol dehydration followed by propane refrigeration, the principal competitive technology. The BP-Amoco gas processing plant in Pascagoula, MS was finalized as the location for the field demonstration. Detailed drawings of the MTR membrane skid (already constructed) were submitted to the plant in February, 2000. However, problems in reaching an agreement on the specifications of the system compressor delayed the project significantly, so MTR requested (and was subsequently granted) a no-cost extension to the project. Following resolution of the compressor issues, the goal is to order the compressor during the first quarter of 2002, and to start field tests in mid-2002. Information from potential users of the membrane separation process in the natural gas processing industry suggests that applications such as fuel gas conditioning and wellhead gas processing are the most promising initial targets. Therefore, most of our commercialization effort is focused on promoting these applications. Requests for stream evaluations and for design and price quotations have been received through MTR's web site, from direct contact with potential users, and through announcements in industry publications. To date, about 90 commercial quotes have been supplied, and orders totaling about $1.13 million for equipment or rental of membrane units have been received.

  6. Microsoft PowerPoint - WIPPRecovery

    Office of Environmental Management (EM)

    Department of Energy Tsinghua Slideshow final for distribution (2) Microsoft PowerPoint - Tsinghua Slideshow final for distribution (2) Microsoft PowerPoint - Tsinghua Slideshow final for distribution (2) (4.67 MB) More Documents & Publications Microsoft PowerPoint - Final translated version of Tsinghua Speech Idaho Operations AMWTP Fact Sheet Methane Hydrate R&D

    Innovation that Can Make a Difference Secretary Steven Chu Emirates Palace Hotel Abu Dhabi, United Arab Emirates 24

  7. Process for removing thorium and recovering vanadium from titanium chlorinator waste

    DOE Patents [OSTI]

    Olsen, Richard S.; Banks, John T.

    1996-01-01

    A process for removal of thorium from titanium chlorinator waste comprising: (a) leaching an anhydrous titanium chlorinator waste in water or dilute hydrochloric acid solution and filtering to separate insoluble minerals and coke fractions from soluble metal chlorides; (b) beneficiating the insoluble fractions from step (a) on shaking tables to recover recyclable or otherwise useful TiO.sub.2 minerals and coke; and (c) treating filtrate from step (a) with reagents to precipitate and remove thorium by filtration along with acid metals of Ti, Zr, Nb, and Ta by the addition of the filtrate (a), a base and a precipitant to a boiling slurry of reaction products (d); treating filtrate from step (c) with reagents to precipitate and recover an iron vanadate product by the addition of the filtrate (c), a base and an oxidizing agent to a boiling slurry of reaction products; and (e) treating filtrate from step (d) to remove any remaining cations except Na by addition of Na.sub.2 CO.sub.3 and boiling.

  8. Hydrometallurgical process for recovering iron sulfate and zinc sulfate from baghouse dust

    DOE Patents [OSTI]

    Zaromb, Solomon; Lawson, Daniel B.

    1994-01-01

    A process for recovering zinc/rich and iron-rich fractions from the baghouse dust that is generated in various metallurgical operations, especially in steel-making and other iron-making plants, comprises the steps of leaching the dust by hot concentrated sulfuric acid so as to generate dissolved zinc sulfate and a precipitate of iron sulfate, separating the precipitate from the acid by filtration and washing with a volatile liquid, such as methanol or acetone, and collecting the filtered acid and the washings into a filtrate fraction. The volatile liquid may be recovered distillation, and the zinc may be removed from the filtrate by alternative methods, one of which involves addition of a sufficient amount of water to precipitate hydrated zinc sulfate at 10.degree. C., separation of the precipitate from sulfuric acid by filtration, and evaporation of water to regenerate concentrated sulfuric acid. The recovery of iron may also be effected in alternative ways, one of which involves roasting the ferric sulfate to yield ferric oxide and sulfur trioxide, which can be reconverted to concentrated sulfuric acid by hydration. The overall process should not generate any significant waste stream.

  9. Hydrometallurgical process for recovering iron sulfate and zinc sulfate from baghouse dust

    DOE Patents [OSTI]

    Zaromb, S.; Lawson, D.B.

    1994-02-15

    A process for recovering zinc-rich and iron-rich fractions from the baghouse dust that is generated in various metallurgical operations, especially in steel-making and other iron-making plants, comprises the steps of leaching the dust by hot concentrated sulfuric acid so as to generate dissolved zinc sulfate and a precipitate of iron sulfate, separating the precipitate from the acid by filtration and washing with a volatile liquid, such as methanol or acetone, and collecting the filtered acid and the washings into a filtrate fraction. The volatile liquid may be recovered by distillation, and the zinc may be removed from the filtrate by alternative methods, one of which involves addition of a sufficient amount of water to precipitate hydrated zinc sulfate at 10 C, separation of the precipitate from sulfuric acid by filtration, and evaporation of water to regenerate concentrated sulfuric acid. The recovery of iron may also be effected in alternative ways, one of which involves roasting the ferric sulfate to yield ferric oxide and sulfur trioxide, which can be reconverted to concentrated sulfuric acid by hydration. The overall process should not generate any significant waste stream. 1 figure.

  10. Analytical Chemistry and Materials Characterization Results for Debris Recovered from Nitrate Salt Waste Drum S855793

    SciTech Connect (OSTI)

    Martinez, Patrick Thomas; Chamberlin, Rebecca M.; Schwartz, Daniel S.; Worley, Christopher Gordon; Garduno, Katherine; Lujan, Elmer J. W.; Borrego, Andres Patricio; Castro, Alonso; Colletti, Lisa Michelle; Fulwyler, James Brent; Holland, Charlotte S.; Keller, Russell C.; Klundt, Dylan James; Martinez, Alexander; Martin, Frances Louise; Montoya, Dennis Patrick; Myers, Steven Charles; Porterfield, Donivan R.; Schake, Ann Rene; Schappert, Michael Francis; Soderberg, Constance B.; Spencer, Khalil J.; Stanley, Floyd E.; Thomas, Mariam R.; Townsend, Lisa Ellen; Xu, Ning

    2015-09-16

    Solid debris was recovered from the previously-emptied nitrate salt waste drum S855793. The bulk sample was nondestructively assayed for radionuclides in its as-received condition. Three monoliths were selected for further characterization. Two of the monoliths, designated Specimen 1 and 3, consisted primarily of sodium nitrate and lead nitrate, with smaller amounts of lead nitrate oxalate and lead oxide by powder x-ray diffraction. The third monolith, Specimen 2, had a complex composition; lead carbonate was identified as the predominant component, and smaller amounts of nitrate, nitrite and carbonate salts of lead, magnesium and sodium were also identified. Microfocused x-ray fluorescence (MXRF) mapping showed that lead was ubiquitous throughout the cross-sections of Specimens 1 and 2, while heteroelements such as potassium, calcium, chromium, iron, and nickel were found in localized deposits. MXRF examination and destructive analysis of fragments of Specimen 3 showed elevated concentrations of iron, which were broadly distributed through the sample. With the exception of its high iron content and low carbon content, the chemical composition of Specimen 3 was within the ranges of values previously observed in four other nitrate salt samples recovered from emptied waste drums.

  11. Opportunity Analysis for Recovering Energy from Industrial Waste Heat and Emissions

    SciTech Connect (OSTI)

    Viswanathan, Vish V.; Davies, Richard W.; Holbery, Jim D.

    2006-04-01

    United States industry consumed 32.5 Quads (34,300 PJ) of energy during 2003, which was 33.1% of total U.S. energy consumption (EIA 2003 Annual Energy Review). The U.S. industrial complex yields valuable goods and products. Through its manufacturing processes as well as its abundant energy consumption, it supports a multi-trillion dollar contribution to the gross domestic product and provides millions of jobs in the U.S. each year. Industry also yields waste products directly through its manufacturing processes and indirectly through its energy consumption. These waste products come in two forms, chemical and thermal. Both forms of waste have residual energy values that are not routinely recovered. Recovering and reusing these waste products may represent a significant opportunity to improve the energy efficiency of the U.S. industrial complex. This report was prepared for the U.S. Department of Energy Industrial Technologies Program (DOE-ITP). It analyzes the opportunity to recover chemical emissions and thermal emissions from U.S. industry. It also analyzes the barriers and pathways to more effectively capitalize on these opportunities. A primary part of this analysis was to characterize the quantity and energy value of the emissions. For example, in 2001, the industrial sector emitted 19% of the U.S. greenhouse gases (GHG) through its industrial processes and emitted 11% of GHG through electricity purchased from off-site utilities. Therefore, industry (not including agriculture) was directly and indirectly responsible for emitting 30% of the U.S. GHG. These emissions were mainly comprised of carbon dioxide (CO2), but also contained a wide-variety of CH4 (methane), CO (carbon monoxide), H2 (hydrogen), NMVOC (non-methane volatile organic compound), and other chemicals. As part of this study, we conducted a survey of publicly available literature to determine the amount of energy embedded in the emissions and to identify technology opportunities to capture and

  12. CAPABILITY TO RECOVER PLUTONIUM-238 IN H-CANYON/HB-LINE

    SciTech Connect (OSTI)

    Fuller, K.; Smith, Robert H. Jr.; Goergen, Charles R.

    2013-01-09

    Plutonium-238 is used in Radioisotope Thermoelectric Generators (RTGs) to generate electrical power and in Radioisotope Heater Units (RHUs) to produce heat for electronics and environmental control for deep space missions. The domestic supply of Pu-238 consists of scrap material from previous mission production or material purchased from Russia. Currently, the United States has no significant production scale operational capability to produce and separate new Pu-238 from irradiated neptunium-237 targets. The Department of Energy - Nuclear Energy is currently evaluating and developing plans to reconstitute the United States capability to produce Pu-238 from irradiated Np-237 targets. The Savannah River Site had previously produced and/or processed all the Pu-238 utilized in Radioisotope Thermoelectric Generators (RTGs) for deep space missions up to and including the majority of the plutonium for the Cassini Mission. The previous full production cycle capabilities included: Np-237 target fabrication, target irradiation, target dissolution and Np-237 and Pu-238 separation and purification, conversion of Np-237 and Pu-238 to oxide, scrap recovery, and Pu-238 encapsulation. The capability and equipment still exist and could be revitalized or put back into service to recover and purify Pu-238/Np-237 or broken General Purpose Heat Source (GPHS) pellets utilizing existing process equipment in HB-Line Scrap Recovery, and H-anyon Frame Waste Recovery processes. The conversion of Np-237 and Pu-238 to oxide can be performed in the existing HB-Line Phase-2 and Phase-3 Processes. Dissolution of irradiated Np-237 target material, and separation and purification of Np-237 and Pu-238 product streams would be possible at production rates of ~ 2 kg/month of Pu-238 if the existing H-Canyon Frames Process spare equipment were re-installed. Previously, the primary H-Canyon Frames equipment was removed to be replaced: however, the replacement project was stopped. The spare equipment is

  13. Capability to Recover Plutonium-238 in H-Canyon/HB-Line - 13248

    SciTech Connect (OSTI)

    Fuller, Kenneth S. Jr.; Smith, Robert H. Jr.; Goergen, Charles R.

    2013-07-01

    Plutonium-238 is used in Radioisotope Thermoelectric Generators (RTGs) to generate electrical power and in Radioisotope Heater Units (RHUs) to produce heat for electronics and environmental control for deep space missions. The domestic supply of Pu-238 consists of scrap material from previous mission production or material purchased from Russia. Currently, the United States has no significant production scale operational capability to produce and separate new Pu-238 from irradiated neptunium-237 targets. The Department of Energy - Nuclear Energy is currently evaluating and developing plans to reconstitute the United States capability to produce Pu-238 from irradiated Np-237 targets. The Savannah River Site had previously produced and/or processed all the Pu-238 utilized in Radioisotope Thermoelectric Generators (RTGs) for deep space missions up to and including the majority of the plutonium for the Cassini Mission. The previous full production cycle capabilities included: Np- 237 target fabrication, target irradiation, target dissolution and Np-237 and Pu-238 separation and purification, conversion of Np-237 and Pu-238 to oxide, scrap recovery, and Pu-238 encapsulation. The capability and equipment still exist and could be revitalized or put back into service to recover and purify Pu-238/Np-237 or broken General Purpose Heat Source (GPHS) pellets utilizing existing process equipment in HB-Line Scrap Recovery, and H-Canyon Frame Waste Recovery processes. The conversion of Np-237 and Pu-238 to oxide can be performed in the existing HB-Line Phase-2 and Phase- 3 Processes. Dissolution of irradiated Np-237 target material, and separation and purification of Np-237 and Pu-238 product streams would be possible at production rates of ∼2 kg/month of Pu-238 if the existing H-Canyon Frames Process spare equipment were re-installed. Previously, the primary H-Canyon Frames equipment was removed to be replaced: however, the replacement project was stopped. The spare equipment

  14. END POINTS MANAGEMENT End Points Management The Need for End...

    Office of Environmental Management (EM)

    End Points End-state has been used to refer to the overall status and disposition of a ... They are equally applicable and usable for planning of stabilization and decommissioning ...

  15. Process for recovering evolved hydrogen enriched with at least one heavy hydrogen isotope

    DOE Patents [OSTI]

    Tanaka, John; Reilly, Jr., James J.

    1978-01-01

    This invention relates to a separation means and method for enriching a hydrogen atmosphere with at least one heavy hydrogen isotope by using a solid titaniun alloy hydride. To this end, the titanium alloy hydride containing at least one metal selected from the group consisting of vanadium, chromium, manganese, molybdenum, iron, cobalt and nickel is contacted with a circulating gaseous flow of hydrogen containing at least one heavy hydrogen isotope at a temperature in the range of -20.degree. to +40.degree. C and at a pressure above the dissociation pressure of the hydrided alloy selectively to concentrate at least one of the isotopes of hydrogen in the hydrided metal alloy. The contacting is continued until equilibrium is reached, and then the gaseous flow is isolated while the temperature and pressure of the enriched hydride remain undisturbed selectively to isolate the hydride. Thereafter, the enriched hydrogen is selectively recovered in accordance with the separation factor (S.F.) of the alloy hydride employed.

  16. In situ method for recovering hydrocarbon from subterranean oil shale deposits

    SciTech Connect (OSTI)

    Friedman, R.H.

    1987-11-03

    This patent describes in situ method for recovering hydrocarbons from subterranean oil shale deposits, the deposits comprising mineral rock and kerogen, comprising (a) penetrating the oil shale deposit with at least one well; (b) forming a zone of fractured and/or rubbilized oil shale material adjacent the well by hydraulic or explosive fracturing; (c) introducing a hydrogen donor solvent including tetralin into the portion of the oil shale formation treated in step (b) in a volume sufficient to fill substantially all of the void space created by the fracturing and rubbilizing treatment; (d) applying hydrogen to the tetralin and maintaining a predetermined pressure for a predetermined period of time sufficient to cause disintegration of the oil shale material; (e) thereafter introducing an oxidative environment into the portion of the oil shale deposit (f) producing the solvent in organic fragments to the surface of the earth, and (g) separating the organic fragments from the solvent.

  17. PowerPoint Presentation | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PowerPoint Presentation PowerPoint Presentation PDF icon PowerPoint Presentation More Documents & Publications 2012 Quality Assurance Improvement Project Plan EM QA Working Group...

  18. Cedar Point Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    Cedar Point Wind Farm Jump to: navigation, search Name Cedar Point Wind Farm Facility Cedar Point Wind Farm Sector Wind energy Facility Type Commercial Scale Wind Facility Status...

  19. Star Point Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    Point Wind Farm Jump to: navigation, search Name Star Point Wind Farm Facility Star Point Wind Farm Sector Wind energy Facility Type Commercial Scale Wind Facility Status In...

  20. Department of the Interior's Office of Surface Mining should more fully recover or eliminate its costs of regulating coal mining

    SciTech Connect (OSTI)

    Not Available

    1985-05-28

    The Department of the Interior's Office of Surface Mining Reclamation and Enforcement (OSM) is spending about $65 million annually to implement regulatory program requirements of the Surface Mining Control and Reclamation Act of 1977. The act requires the regulatory authority, whether OSM or that of a state with an OSM-approved program, to charge fees to mining operators for reviewing, enforcing, and administering coal mine operating permits and authorizes that the amount of such fees can fully recover costs. The OSM and states assess certain fees, but the fees recover only a small portion of their program costs. GAO found that if OSM and states fully recovered their regulatory costs, OSM could save over $50 million a year and the impact on coal demand and production would be minimal. GAO recommends that the Secretary of the Interior collect fees that fully recover OSM's regulatory costs, phase out or substantially reduce financial assistance to states, and encourage states to fully recover their own costs.

  1. Heritable Genetic Changes in Cells Recovered From Irradiated 3D Tissue Contracts. Final report

    SciTech Connect (OSTI)

    Cornforth, Michael N.

    2013-05-03

    Combining contemporary cytogenetic methods with DNA CGH microarray technology and chromosome flow-sorting increases substantially the ability to resolve exchange breakpoints associated with interstitial deletions and translocations, allowing the consequences of radiation damage to be directly measured at low doses, while also providing valuable insights into molecular mechanisms of misrepair processes that, in turn, identify appropriate biophysical models of risk at low doses. The aims of this work apply to cells recovered from 3D tissue constructs of human skin and, for the purpose of comparison, the same cells irradiated in traditional 2D cultures. These aims are: to analyze by multi-flour fluorescence in situ hybridization (mFISH) the chromosomes in clonal descendents of individual human fibroblasts that were previously irradiated; to examine irradiated clones from Aim 1 for submicroscopic deletions by subjecting their DNA to comparative genomic hybridization (CGH) microarray analysis; and to flow-sort aberrant chromosomes from clones containing stable radiation-induced translocations and map the breakpoints to within an average resolution of 100 kb using the technique of 'array painting'.

  2. A new method for recovering Fe(II) sulfate, copper, and cobalt from converter slag

    SciTech Connect (OSTI)

    Ziyadanogullari, R. )

    1992-03-01

    The aim of this study was to recover copper and cobalt from the stock-piled converter slags at the Ergani Mining Co. in Turkey. Copper and cobalt are present in various chemical forms in the slag. For that reason, copper and cobalt were first converted to Cu{sub 2}S and CoS by passing H{sub 2}S gas through a slurry of ground slag in H{sub 2}SO{sub 4} solutions. In the second stage, the slurry was filtered and it was determined that 30-40% of the iron and trace amounts of copper and cobalt passed into the solution as Fe{sup 2+}, Cu{sup 2+}, and Co{sup 2+} ions. The slag residue was then dried at 105C for 2 h and roasted in a muffle furnace at about 600-700C for different time periods. In the third stage, the mass obtained at the end of the roasting process was boiled with distilled water and filtered. The final solution was brought to volume and analyzed for copper and cobalt. It was determined that practically all of the Cu and 70.7% of the Co passed into the solution.

  3. The feasibility of recovering medium to heavy oil using geopressured- geothermal fluids

    SciTech Connect (OSTI)

    Negus-de Wys, J.; Kimmell, C.E.; Hart, G.F.; Plum, M.M.

    1991-09-01

    The feasibility, economics and environmental concerns of producing more domestic oil using thermal enhanced oil recovery (TEOR) are reviewed and the unique nature of geopressured-geothermal (GPGT) fluids for thermal recovery are outlined. Current methods of TEOR are briefly discussed and it is noted that these methods are presently under scrutiny by both federal and state air quality agencies; and moreover, they often involve costly operational and mechanical problems associated with heating water on the surface for injection into the target reservoir. The characteristics of the GPGT resources as seen through previous Department of Energy (DOE) studies from sites in Louisiana and Texas are discussed. These studies indicate sufficient quantities of GPGT fluids can be produced to sustain a TEOR project. The Alworth Field in the south Texas Mirando Trend is proposed as a TEOR pilot site. The target reservoirs for injection of the GPGT fluids are the Jackson and Yegua sandstones of the upper Eocene Epoch. The reservoirs contain an estimated 4 MMbbls of heavy oil in place (OIP) (18.6{degree}API) of which it is estimated that at least 1 MMbbls could be recovered by TEOR. The problems associated with using the GPGT fluids for TEOR include those normally associated with hot water flooding but in addition the reaction of the brine from the geopressured-geothermal reservoir with the target reservoir is uncertain. Under the elevated temperatures associated with GPGT TEOR, actual increased porosity and permeability are possible. 120 refs., 40 figs., 13 tabs.

  4. Continuous Learning Points: Earn CLPs!

    Broader source: Energy.gov [DOE]

    Attendees at the PM Workshop can earn Continuing Learning Points (CLPs) for both days in addition to earning CLPs for the optional half-day training sessions on Earned Value Management and Federal Acquisition Institute Training Application System. Click on this CLP form for instructions.

  5. Energy recycling by co-combustion of coal and recovered paint solids from automobile paint operations

    SciTech Connect (OSTI)

    Achariya Suriyawong; Rogan Magee; Ken Peebles; Pratim Biswas

    2009-05-15

    This paper presents the results of an experimental study of particulate emission and the fate of 13 trace elements (arsenic (As), barium (Ba), cadmium (Cd), chromium (Cr), copper (Cu), cobalt (Co), manganese (Mn), molybdenum (Mo), nickel (Ni), lead (Pb), mercury (Hg), vanadium (V), and zinc (Zn)) during combustion tests of recovered paint solids (RPS) and coal. The emissions from combustions of coal or RPS alone were compared with those of co-combustion of RPS with subbituminous coal. The distribution/partitioning of these toxic elements between a coarse-mode ash (particle diameter (d{sub p}) > 0.5 {mu}m), a submicrometer-mode ash (d{sub p} < 0.5 {mu}m), and flue gases was also evaluated. Submicrometer particles generated by combustion of RPS alone were lower in concentration and smaller in size than that from combustion of coal. However, co-combustion of RPS and coal increased the formation of submicrometer-sized particles because of the higher reducing environment in the vicinity of burning particles and the higher volatile chlorine species. Hg was completely volatilized in all cases; however, the fraction in the oxidized state increased with co-combustion. Most trace elements, except Zn, were retained in ash during combustion of RPS alone. Mo was mostly retained in all samples. The behavior of elements, except Mn and Mo, varied depending on the fuel samples. As, Ba, Cr, Co, Cu, and Pb were vaporized to a greater extent from cocombustion of RPS and coal than from combustion of either fuel. Evidence of the enrichment of certain toxic elements in submicrometer particles has also been observed for As, Cd, Cr, Cu, and Ni during co-combustion. 27 refs., 6 figs., 5 tabs.

  6. Analysis of the Reuse of Uranium Recovered from the Reprocessing of Commercial LWR Spent Fuel

    SciTech Connect (OSTI)

    DelCul, Guillermo Daniel; Trowbridge, Lee D; Renier, John-Paul; Ellis, Ronald James; Williams, Kent Alan; Spencer, Barry B; Collins, Emory D

    2009-02-01

    This report provides an analysis of the factors involved in the reuse of uranium recovered from commercial light-water-reactor (LWR) spent fuels (1) by reenrichment and recycling as fuel to LWRs and/or (2) by recycling directly as fuel to heavy-water-reactors (HWRs), such as the CANDU (registered trade name for the Canadian Deuterium Uranium Reactor). Reuse is an attractive alternative to the current Advanced Fuel Cycle Initiative (AFCI) Global Nuclear Energy Partnership (GNEP) baseline plan, which stores the reprocessed uranium (RU) for an uncertain future or attempts to dispose of it as 'greater-than-Class C' waste. Considering that the open fuel cycle currently deployed in the United States already creates a huge excess quantity of depleted uranium, the closed fuel cycle should enable the recycle of the major components of spent fuel, such as the uranium and the hazardous, long-lived transuranic (TRU) actinides, as well as the managed disposal of fission product wastes. Compared with the GNEP baseline scenario, the reuse of RU in the uranium fuel cycle has a number of potential advantages: (1) avoidance of purchase costs of 11-20% of the natural uranium feed; (2) avoidance of disposal costs for a large majority of the volume of spent fuel that is reprocessed; (3) avoidance of disposal costs for a portion of the depleted uranium from the enrichment step; (4) depending on the {sup 235}U assay of the RU, possible avoidance of separative work costs; and (5) a significant increase in the production of {sup 238}Pu due to the presence of {sup 236}U, which benefits somewhat the transmutation value of the plutonium and also provides some proliferation resistance.

  7. Three-point galaxy-galaxy lensing as a probe of dark matter halo shapes

    SciTech Connect (OSTI)

    Adhikari, Susmita; Chue, Chun Yin Ricky; Dalal, Neal E-mail: chue2@illinois.edu

    2015-01-01

    We propose a method to measure the ellipticities of dark matter halos using the lens-shear-shear 3-point correlation function. This method is immune to effects of galaxy-halo misalignments that can potentially limit 2-point galaxy-galaxy lensing measurements of halo anisotropy. Using a simple model for the projected mass distributions of dark matter halos, we construct an ellipticity estimator that sums over all possible triangular configurations of the 3-point function. By applying our estimator to halos from N-body simulations, we find that systematic errors in the recovered ellipticity will be at the ?<5% fractional level. We estimate that future imaging surveys like LSST will have sufficient statistics to detect halo ellipticities using 3-point lensing.

  8. Method for removing copper from molten metal with a molten slag and for recovering the copper from the slag

    SciTech Connect (OSTI)

    Oden, L.L.

    1993-12-31

    The present invention relates generally to a method for removing impurity metal from a molten metal such as iron and steel. It is a method for removing copper from molten iron and steel with a molten slag and thereafter recovering the copper from the slag.

  9. Femtosecond photoelectron point projection microscope

    SciTech Connect (OSTI)

    Quinonez, Erik; Handali, Jonathan; Barwick, Brett

    2013-10-15

    By utilizing a nanometer ultrafast electron source in a point projection microscope we demonstrate that images of nanoparticles with spatial resolutions of the order of 100 nanometers can be obtained. The duration of the emission process of the photoemitted electrons used to make images is shown to be of the order of 100 fs using an autocorrelation technique. The compact geometry of this photoelectron point projection microscope does not preclude its use as a simple ultrafast electron microscope, and we use simple analytic models to estimate temporal resolutions that can be expected when using it as a pump-probe ultrafast electron microscope. These models show a significant increase in temporal resolution when comparing to ultrafast electron microscopes based on conventional designs. We also model the microscopes spectroscopic abilities to capture ultrafast phenomena such as the photon induced near field effect.

  10. Point contacts in encapsulated graphene

    SciTech Connect (OSTI)

    Handschin, Clevin; Fülöp, Bálint; Csonka, Szabolcs; Makk, Péter; Blanter, Sofya; Weiss, Markus; Schönenberger, Christian; Watanabe, Kenji; Taniguchi, Takashi

    2015-11-02

    We present a method to establish inner point contacts with dimensions as small as 100 nm on hexagonal boron nitride (hBN) encapsulated graphene heterostructures by pre-patterning the top-hBN in a separate step prior to dry-stacking. 2- and 4-terminal field effect measurements between different lead combinations are in qualitative agreement with an electrostatic model assuming point-like contacts. The measured contact resistances are 0.5–1.5 kΩ per contact, which is quite low for such small contacts. By applying a perpendicular magnetic field, an insulating behaviour in the quantum Hall regime was observed, as expected for inner contacts. The fabricated contacts are compatible with high mobility graphene structures and open up the field for the realization of several electron optical proposals.

  11. Turning points in reactor design

    SciTech Connect (OSTI)

    Beckjord, E.S.

    1995-09-01

    This article provides some historical aspects on nuclear reactor design, beginning with PWR development for Naval Propulsion and the first commercial application at Yankee Rowe. Five turning points in reactor design and some safety problems associated with them are reviewed: (1) stability of Dresden-1, (2) ECCS, (3) PRA, (4) TMI-2, and (5) advanced passive LWR designs. While the emphasis is on the thermal-hydraulic aspects, the discussion is also about reactor systems.

  12. PowerPoint Presentation | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PowerPoint Presentation PowerPoint Presentation PowerPoint Presentation (654.16 KB) More Documents & Publications Microsoft PowerPoint - 13 DOE PM Workshop UPF Presentation revised - Harry Peters [Compatibility Mode] PowerPoint Presentation Uranium Processing Facility (UPF) - Getting the Right Project Structure and Acquisition Plan Independent Oversight Review, Y-12 National Security Complex - March 2014

  13. Thermochemical process for recovering Cu from CuO or CuO.sub.2

    DOE Patents [OSTI]

    Richardson, deceased, Donald M.; Bamberger, Carlos E.

    1981-01-01

    A process for producing hydrogen comprises the step of reacting metallic Cu with Ba(OH).sub.2 in the presence of steam to produce hydrogen and BaCu.sub.2 O.sub.2. The BaCu.sub.2 O.sub.2 is reacted with H.sub.2 O to form Cu.sub.2 O and a Ba(OH).sub.2 product for recycle to the initial reaction step. Cu can be obtained from the Cu.sub.2 O product by several methods. In one embodiment the Cu.sub.2 O is reacted with HF solution to provide CuF.sub.2 and Cu. The CuF.sub.2 is reacted with H.sub.2 O to provide CuO and HF. CuO is decomposed to Cu.sub.2 O and O.sub.2. The HF, Cu and Cu.sub.2 O are recycled. In another embodiment the Cu.sub.2 O is reacted with aqueous H.sub.2 SO.sub.4 solution to provide CuSO.sub.4 solution and Cu. The CuSO.sub.4 is decomposed to CuO and SO.sub.3. The CuO is decomposed to form Cu.sub.2 O and O.sub.2. The SO.sub.3 is dissolved to form H.sub.2 SO.sub.4. H.sub.2 SO.sub.4, Cu and Cu.sub.2 O are recycled. In another embodiment Cu.sub.2 O is decomposed electrolytically to Cu and O.sub.2. In another aspect of the invention, Cu is recovered from CuO by the steps of decomposing CuO to Cu.sub.2 O and O.sub.2, reacting the Cu.sub.2 O with aqueous HF solution to produce Cu and CuF.sub.2, reacting the CuF.sub.2 with H.sub.2 O to form CuO and HF, and recycling the CuO and HF to previous reaction steps.

  14. Process for recovering elemental phosphorus and a metal concentrate from ferrophos

    DOE Patents [OSTI]

    Munday, Theodore F.; Mohr, Richard A.

    1989-02-21

    Ferrophos is treated in a plasma furnace by maintaining an electric arc between a cathode and at least one point on the surface of the ferrophos which serves as the anode in the presence of an inert plasma gas, maintaining the average temperature of the ferrophos at about 2,000.degree. C. to about 2,700.degree. C., evolving gaseous phosphorus from the ferrophos until it contains less than about 7% by weight phosphorus, removing a purified phosphorus gas as one product and a metal concentrate having a reduced phosphorus content as a coproduct.

  15. Florida Nuclear Profile - Turkey Point

    U.S. Energy Information Administration (EIA) Indexed Site

    Turkey Point" "Unit","Summer capacity (mw)","Net generation (thousand mwh)","Summer capacity factor (percent)","Type","Commercial operation date","License expiration date" 3,693,"5,356",88.2,"PWR","application/vnd.ms-excel","application/vnd.ms-excel" 4,693,"5,950",98.0,"PWR","application/vnd.ms-excel","application/vnd.ms-excel"

  16. Field's Point Wastewater Treatment Facility (Narragansett Bay...

    Open Energy Info (EERE)

    Field's Point Wastewater Treatment Facility (Narragansett Bay Commission) Jump to: navigation, search Name Field's Point Wastewater Treatment Facility (Narragansett Bay Commission)...

  17. TEPP Points of Contact | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Transportation Emergency Preparedness Program TEPP Points of Contact TEPP Points of Contact TEPP is a national program managed at a headquarters level and implemented through...

  18. Signal processing Model/Method for Recovering Acoustic Reflectivity of Spot Weld

    Energy Science and Technology Software Center (OSTI)

    2005-09-08

    empirically. For fast estimation of R using only observations beta(1, ..., T) a receiver state equation has been derived, and is attached as Eq. (3). This equation has the further advantage that the initial impulse S need not be known, rather it is estimated simultaneously. This is necessary because element failure and coupling can cause large variations in S. Constrained nonlinear least squares techniques can be applied to this equation to recover reflectivity (and initial impulse) [4]. In particular, the Gauss-Newton algorithm on the log of the sum of squared errors based on the receiver state equation is recommended. To summarize, it is the model described in Eqs. (2) and (3) that is novel, and that enables the recovery of acoustic reflectivity from the ultrasound signals. It has been verified that this reflectivity estimate provides a better indicator of weld veracity than other features previously derived from such signals.« less

  19. Bulk and mechanical properties of the Paintbrush tuff recovered from boreholes UE25 NRG-4 and -5: Data report

    SciTech Connect (OSTI)

    Boyd, P.J.; Noel, J.S.; Martin, R.J. [New England Research, Inc., White River Junction, VT (United States); Price, R.H. [Sandia National Labs., Albuquerque, NM (United States)

    1996-09-01

    Experimental results are presented for bulk and mechanical properties measurements on specimens of the Paintbrush tuff recovered from boreholes UE25 NRG-4 and -5, at Yucca Mountain, Nevada. Measurements have been performed on three thermal/mechanical units, PTn, TSwl, and TSw2. On each specimen the following bulk properties have been reported: dry bulk density, saturated bulk density, average grain density, and porosity. Unconfined compression to failure, confined compression to failure, and indirect tensile strength tests were performed on selected specimens recovered from the boreholes. In addition, compressional and shear wave velocities were measured on specimens designated for unconfined compression and confined compression experiments. Measurements were conducted at room temperature on nominally water-saturated specimens. The nominal rate for the fracture experiments was 10{sup -5}s{sup -1}.

  20. Photoluminescence studies of shock-recovered Y{sub 2}O{sub 3}:Eu{sup 3+}

    SciTech Connect (OSTI)

    Kishimura, Hiroaki Hamada, Sho; Aruga, Atsushi; Matsumoto, Hitoshi

    2015-01-05

    A series of shock-recovery experiments on Y{sub 2}O{sub 3}:Eu{sup 3+} powder were conducted involving the impact of a flyer plate accelerated by a single-stage powder-propellant gun. The recovered samples were characterized by X-ray diffraction (XRD) analysis and photoluminescence (PL) spectroscopy. The XRD and PL results of samples shocked at pressures of 13 GPa indicated that a phase transition from a cubic phase to a monoclinic phase occurred. The recovered samples shocked at 21 and 25 GPa consisted of Y{sub 2}O{sub 3}:Eu{sup 3+} with the cubic phase and the monoclinic phase. These results indicated that the shock-induced phase transition was the partial completion of the phase transition.

  1. Report on Audit of Activities Designed to Recover the Taxpayers' Investment in the Clean Coal Technology Program, IG-0391

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    June 6, 1996 REPLY TO ATTN OF: IG-1 SUBJECT: INFORMATION: Report on "Audit of Department of Energy's Activities Designed to Recover the Taxpayers' Investment in the Clean Coal Technology Program" TO: The Secretary BACKGROUND: In 1985, the Congress directed the Department of Energy to implement a Clean Coal Technology Program. The purpose of this Departmental initiative is to successfully demonstrate a new generation of advanced coal-based technologies. As a part of the program, the

  2. Wide-angle point-to-point x-ray imaging with almost arbitrarily...

    Office of Scientific and Technical Information (OSTI)

    Wide-angle point-to-point x-ray imaging with almost arbitrarily large angles of incidence Citation Details In-Document Search Title: Wide-angle point-to-point x-ray imaging with ...

  3. Public Meetings: Talking Points | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Public Meetings: Talking Points Public Meetings: Talking Points Talking Points from December 2008 Public Meetings: Talking Points (1.56 MB) More Documents & Publications ATVM Technical Support Document Fact #931 June 27, 2016 Plug-in Electric Vehicles Were Available in Nine Different Size Classes in 2015 - Dataset ATVM Loan Program Interim Final Rule (November 12, 2008

  4. Oak Ridge Office SharePoint( MicrosoftSHarePointServer) PIA, Information

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Resourses Management Division | Department of Energy SharePoint( MicrosoftSHarePointServer) PIA, Information Resourses Management Division Oak Ridge Office SharePoint( MicrosoftSHarePointServer) PIA, Information Resourses Management Division Oak Ridge Office SharePoint( MicrosoftSHarePointServer) PIA, Information Resourses Management Division Oak Ridge Office SharePoint( MicrosoftSHarePointServer) PIA, Information Resourses Management Division (81.87 KB) More Documents & Publications

  5. VPP POINTS OF CONTACT | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    VPP POINTS OF CONTACT VPP POINTS OF CONTACT July 9, 2015 The VPP Points of Contact document provides a current listing of all current DOE VPP participants Points of Contact for both Federal and Contractor positions. VPP Points of Contact - July 9, 2015 (204.36 KB) More Documents & Publications 2009 Voluntary Protection Programs Participants' Association (VPPPA) Presentation: Conducting your Annual VPP Self Assessment 2009 Voluntary Protection Programs Participants' Association (VPPPA)

  6. Decision Point 1 Topical Report

    SciTech Connect (OSTI)

    Yablonsky, Al; Barsoumian, Shant; Legere, David

    2013-05-01

    This Topical Report addresses accomplishments achieved during Phase 2a of the SkyMine® Carbon Mineralization Pilot Project. The primary objectives of this project are to design, construct, and operate a system to capture CO2 from a slipstream of flue gas from a commercial coal-fired cement kiln, convert that CO2 to products having commercial value (i.e., beneficial use), show the economic viability of the CO2 capture and conversion process, and thereby advance the technology to the point of readiness for commercial scale demonstration and proliferation. The overall process is carbon negative, resulting in mineralization of CO2 that would otherwise be released into the atmosphere. The project will also substantiate market opportunities for the technology by sales of chemicals into existing markets, and identify opportunities to improve technology performance and reduce costs at the commercial scale. The project is being conducted in two phases. The primary objectives of Phase 1 were to elaborate proven SkyMine® process chemistry to commercial pilot-scale operation and complete the preliminary design for the pilot plant to be built and operated in Phase 2, complete a NEPA evaluation, and develop a comprehensive carbon life cycle analysis. The objective of the current Phase (2a) is to complete the detailed design of the pilot plant to be built in Phase 2b.

  7. Use of off-axis injection as an alternative to geometrically merging beams in an energy-recovering linac

    DOE Patents [OSTI]

    Douglas, David R.

    2012-01-10

    A method of using off-axis particle beam injection in energy-recovering linear accelerators that increases operational efficiency while eliminating the need to merge the high energy re-circulating beam with an injected low energy beam. In this arrangement, the high energy re-circulating beam and the low energy beam are manipulated such that they are within a predetermined distance from one another and then the two immerged beams are injected into the linac and propagated through the system. The configuration permits injection without geometric beam merging as well as decelerated beam extraction without the use of typical beamline elements.

  8. Process for recovering uranium from waste hydrocarbon oils containing the same. [Uranium contaminated lubricating oils from gaseous diffusion compressors

    DOE Patents [OSTI]

    Conrad, M.C.; Getz, P.A.; Hickman, J.E.; Payne, L.D.

    1982-06-29

    The invention is a process for the recovery of uranium from uranium-bearing hydrocarbon oils containing carboxylic acid as a degradation product. In one aspect, the invention comprises providing an emulsion of water and the oil, heating the same to a temperature effecting conversion of the emulsion to an organic phase and to an acidic aqueous phase containing uranium carboxylate, and recovering the uranium from the aqueous phase. The process is effective, simple and comparatively inexpensive. It avoids the use of toxic reagents and the formation of undesirable intermediates.

  9. Points of Contact and Privacy Act Advisory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Points of Contact Points of Contact and Privacy Act Advisory If you are trying to contact an agency other than the Department of Energy, use the web address: http:...

  10. CenterPoint Comments | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CenterPoint Comments CenterPoint Comments CenterPoint Comments on the Smart Grid RFI: Addressing Policy and Logistical Challenges CenterPoint Comments (5.21 MB) More Documents & Publications City Utilities of Springfield Missouri Comments on Smart Grid RFI: Addressing Policy and Logistical Challenges Dairyland Power Cooperative Comments on Smart Grid RFI: Addressing Policy and Logistical Challenges Comments of North American Electric Reliability Corporation (NERC) to DOE Smart Grid RFI:

  11. Beryllium Program Points of Contact - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Program Points of Contact About Us Hanford Cultural Resources Beryllium Program Beryllium Program Points of Contact Beryllium Facilities & Areas Beryllium Program Information Hanford CBDPP Committee Beryllium FAQs Beryllium Related Links Hanford Beryllium Awareness Group (BAG) Program Performance Assessments Beryllium Program Feedback Beryllium Health Advocates Primary Contractors/Employers Medical Testing and Surveillance Facilities General Resources Beryllium Program Points of Contact

  12. Augmenting epidemiological models with point-of-care diagnostics data

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Pullum, Laura L.; Ramanathan, Arvind; Nutaro, James J.; Ozmen, Ozgur

    2016-04-20

    Although adoption of newer Point-of-Care (POC) diagnostics is increasing, there is a significant challenge using POC diagnostics data to improve epidemiological models. In this work, we propose a method to process zip-code level POC datasets and apply these processed data to calibrate an epidemiological model. We specifically develop a calibration algorithm using simulated annealing and calibrate a parsimonious equation-based model of modified Susceptible-Infected-Recovered (SIR) dynamics. The results show that parsimonious models are remarkably effective in predicting the dynamics observed in the number of infected patients and our calibration algorithm is sufficiently capable of predicting peak loads observed in POC diagnosticsmore » data while staying within reasonable and empirical parameter ranges reported in the literature. Additionally, we explore the future use of the calibrated values by testing the correlation between peak load and population density from Census data. Our results show that linearity assumptions for the relationships among various factors can be misleading, therefore further data sources and analysis are needed to identify relationships between additional parameters and existing calibrated ones. As a result, calibration approaches such as ours can determine the values of newly added parameters along with existing ones and enable policy-makers to make better multi-scale decisions.« less

  13. Rescuing Those Left Behind. Recovering and Characterizing Underdigested Membrane and Hydrophobic Proteins To Enhance Proteome Measurement Depth

    SciTech Connect (OSTI)

    Giannone, Richard J.; Wurch, Louie L.; Podar, Mircea; Hettich, Robert L.

    2015-07-21

    The marine archaeon Nanoarchaeum equitans is dependent on direct physical contact with its host, the hyperthermophile Ignicoccus hospitalis. This interaction is thought to be membrane-associated, involving a myriad of membrane-anchored proteins; proteomic efforts to better characterize this difficult to analyze interface are paramount to uncovering the mechanism of their association. By extending multienzyme digestion strategies that use sample filtration to recover underdigested proteins for reprocessing/consecutive proteolytic digestion, we applied chymotrypsin to redigest the proteinaceous material left over after initial proteolysis with trypsin of sodium dodecyl sulfate (SDS)-extracted I. hospitalis-N. equitansproteins. We show that proteins with increased hydrophobic character, including membrane proteins with multiple transmembrane helices, are enriched and recovered in the underdigested fraction. Chymotryptic reprocessing provided significant sequence coverage gains in both soluble and hydrophobic proteins alike, with the latter benefiting more so in terms of membrane protein representation. These gains were despite a large proportion of high-quality peptide spectra remaining unassigned in the underdigested fraction suggesting high levels of protein modification on these often surface-exposed proteins. Importantly, these gains were achieved without applying extensive fractionation strategies usually required for thorough characterization of membrane-associated proteins and were facilitated by the generation of a distinct, complementary set of peptides that aid in both the identification and quantitation of this important, under-represented class of proteins.

  14. Rescuing Those Left Behind: Recovering and Characterizing Underdigested Membrane and Hydrophobic Proteins To Enhance Proteome Measurement Depth

    SciTech Connect (OSTI)

    Giannone, Richard J.; Wurch, Louie L.; Podar, Mircea; Hettich, Robert L.

    2015-06-25

    The marine archaeon Nanoarchaeum equitans is dependent on direct physical contact with its host, the hyperthermophile Ignicoccus hospitalis. It is thought that this interaction is membrane-associated, involving a myriad of membrane-anchored proteins; proteomic efforts to better characterize this difficult to analyze interface are paramount to uncovering the mechanism of their association. By extending multienzyme digestion strategies that use sample filtration to recover underdigested proteins for reprocessing/consecutive proteolytic digestion, we applied chymotrypsin to redigest the proteinaceous material left over after initial proteolysis with trypsin of sodium dodecyl sulfate (SDS)-extracted I. hospitalis-N. equitansproteins. We show that proteins with increased hydrophobic character, including membrane proteins with multiple transmembrane helices, are enriched and recovered in the underdigested fraction. Chymotryptic reprocessing provided significant sequence coverage gains in both soluble and hydrophobic proteins alike, with the latter benefiting more so in terms of membrane protein representation. Moreover, these gains were despite a large proportion of high-quality peptide spectra remaining unassigned in the underdigested fraction suggesting high levels of protein modification on these often surface-exposed proteins. Importantly, these gains were achieved without applying extensive fractionation strategies usually required for thorough characterization of membrane-associated proteins and were facilitated by the generation of a distinct, complementary set of peptides that aid in both the identification and quantitation of this important, under-represented class of proteins.

  15. Rescuing Those Left Behind: Recovering and Characterizing Underdigested Membrane and Hydrophobic Proteins To Enhance Proteome Measurement Depth

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Giannone, Richard J.; Wurch, Louie L.; Podar, Mircea; Hettich, Robert L.

    2015-06-25

    The marine archaeon Nanoarchaeum equitans is dependent on direct physical contact with its host, the hyperthermophile Ignicoccus hospitalis. It is thought that this interaction is membrane-associated, involving a myriad of membrane-anchored proteins; proteomic efforts to better characterize this difficult to analyze interface are paramount to uncovering the mechanism of their association. By extending multienzyme digestion strategies that use sample filtration to recover underdigested proteins for reprocessing/consecutive proteolytic digestion, we applied chymotrypsin to redigest the proteinaceous material left over after initial proteolysis with trypsin of sodium dodecyl sulfate (SDS)-extracted I. hospitalis-N. equitansproteins. We show that proteins with increased hydrophobic character, includingmore » membrane proteins with multiple transmembrane helices, are enriched and recovered in the underdigested fraction. Chymotryptic reprocessing provided significant sequence coverage gains in both soluble and hydrophobic proteins alike, with the latter benefiting more so in terms of membrane protein representation. Moreover, these gains were despite a large proportion of high-quality peptide spectra remaining unassigned in the underdigested fraction suggesting high levels of protein modification on these often surface-exposed proteins. Importantly, these gains were achieved without applying extensive fractionation strategies usually required for thorough characterization of membrane-associated proteins and were facilitated by the generation of a distinct, complementary set of peptides that aid in both the identification and quantitation of this important, under-represented class of proteins.« less

  16. Analysis of Crossover Points for MVLT Superclass

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Analysis of Crossover Points for MVLT Superclass 58761v1 Page 1 White Paper - Analysis of Cross-Over Points for Grain-Oriented Electrical Steel and Amorphous Ribbon for the MVLT Superclass Cross-over points for the Medium Voltage Liquid Filled distribution transformer super-class have been analyzed based on the Engineering Analysis provided by the Department of Energy. For the purpose of this white paper, a cross-over point is defined as where the low-cost curve fitted to the point cloud for all

  17. Critical point analysis of phase envelope diagram

    SciTech Connect (OSTI)

    Soetikno, Darmadi; Siagian, Ucok W. R.; Kusdiantara, Rudy Puspita, Dila Sidarto, Kuntjoro A. Soewono, Edy; Gunawan, Agus Y.

    2014-03-24

    Phase diagram or phase envelope is a relation between temperature and pressure that shows the condition of equilibria between the different phases of chemical compounds, mixture of compounds, and solutions. Phase diagram is an important issue in chemical thermodynamics and hydrocarbon reservoir. It is very useful for process simulation, hydrocarbon reactor design, and petroleum engineering studies. It is constructed from the bubble line, dew line, and critical point. Bubble line and dew line are composed of bubble points and dew points, respectively. Bubble point is the first point at which the gas is formed when a liquid is heated. Meanwhile, dew point is the first point where the liquid is formed when the gas is cooled. Critical point is the point where all of the properties of gases and liquids are equal, such as temperature, pressure, amount of substance, and others. Critical point is very useful in fuel processing and dissolution of certain chemicals. Here in this paper, we will show the critical point analytically. Then, it will be compared with numerical calculations of Peng-Robinson equation by using Newton-Raphson method. As case studies, several hydrocarbon mixtures are simulated using by Matlab.

  18. Function point count adjustment by means of scaling touched function points

    SciTech Connect (OSTI)

    Bell, M.

    1997-11-01

    This report contains viewgraphs on the use of scaling touched function points to adjust function point analysis in determine the usefullness, productivity, and quality of software.

  19. System and process for the abatement of casting pollution, reclaiming resin bonded sand, and/or recovering a low BTU fuel from castings

    DOE Patents [OSTI]

    Scheffer, Karl D.

    1984-07-03

    Air is caused to flow through the resin bonded mold to aid combustion of the resin binder to form a low BTU gas fuel. Casting heat is recovered for use in a waste heat boiler or other heat abstraction equipment. Foundry air pollution is reduced, the burned portion of the molding sand is recovered for immediate reuse and savings in fuel and other energy is achieved.

  20. System and process for the abatement of casting pollution, reclaiming resin bonded sand, and/or recovering a low Btu fuel from castings

    DOE Patents [OSTI]

    Scheffer, K.D.

    1984-07-03

    Air is caused to flow through the resin bonded mold to aid combustion of the resin binder to form a low Btu gas fuel. Casting heat is recovered for use in a waste heat boiler or other heat abstraction equipment. Foundry air pollutis reduced, the burned portion of the molding sand is recovered for immediate reuse and savings in fuel and other energy is achieved. 5 figs.

  1. Assessment of landfill reclamation and the effects of age on the combustion of recovered municipal solid waste

    SciTech Connect (OSTI)

    Forster, G A

    1995-01-01

    This report summarized the Lancaster county Solid Waste Management Authorities`s (LCSWMA)landfill reclamation activities, ongoing since 1991. All aspects have been analyzed from the manpower and equipment requirements at the landfill to the operational impacts felt at the LCSWMA Resource Recovery Facility (RRF) where the material is delivered for processing. Characteristics of the reclaimed refuse and soil recovered from trommeling operations are discussed as are results of air monitoring performed at the landfill excavation site and the RRF. The report also discusses the energy value of the reclaimed material and compares this value with those obtained for significantly older reclaimed waste streams. The effects of waste age on the air emissions and ash residue quality at the RRF are also provided. The report concludes by summarizing the project benefits and provides recommendations for other landfill reclamation operations and areas requiring further research.

  2. Creep properties of the Paintbrush tuff recovered from borehole USW NRG-7/7A: Data report

    SciTech Connect (OSTI)

    Martin, R.J.; Noel, J.S.; Boyd, P.J.

    1997-09-01

    Experimental results are presented for seven creep experiments on welded specimens of the Paintbrush tuff recovered from borehole USW NRG-7/7A at Yucca Mountain, Nevada. The measurements were performed at differential stresses of 40, 70, 100, and 130 MPa. The confining pressure and temperature for each of the experiments was 10 MPa and 225 {degrees}C respectively. All of the specimens were tested drained, in a room dry condition. All of the experiments were terminated prior to failure. The duration of the experiments range from 2.6 x 10{sup 6} seconds to 5.9 x 10{sup 6} seconds. Creep strain is observed for those specimens tested at a stress difference. The strain rate is not constant. A primary creep stage is observed. Secondary creep does not exhibit a constant strain rate, but decreases with increasing time.

  3. Point of Compliance | Department of Energy

    Office of Environmental Management (EM)

    Generic Technical Issue Discussion on Point of Compliance More Documents & Publications Long-Term Grout Performance Concentration Averaging Sensitivity and Uncertainty Analysis...

  4. End Point Implementation Examples | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDF icon End Point Implementation Examples More Documents & Publications Post-Deactivation Surveillance and Maintenance Planning Project Management Plan Examples 1 - 80 ...

  5. Wisconsin Nuclear Profile - Point Beach Nuclear Plant

    U.S. Energy Information Administration (EIA) Indexed Site

    Point Beach Nuclear Plant" "Unit","Summer capacity (mw)","Net generation (thousand mwh)","Summer capacity factor (percent)","Type","Commercial operation date","License expiration ...

  6. GreatPoint Energy | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name: GreatPoint Energy Address: 222 Third Street Place: Cambridge, Massachusetts Zip: 02142 Region: Greater Boston Area Sector: Biomass Product:...

  7. Point380 LLC | Open Energy Information

    Open Energy Info (EERE)

    Zip: 80302 Sector: Carbon Product: Point380 provides carbon consulting and resource management solutions to a broad range of clients seeking energy related risk analysis and...

  8. Building Green in Greensburg: Prairie Pointe Townhomes

    Broader source: Energy.gov [DOE]

    This poster highlights energy efficiency, renewable energy, and sustainable features of the high-performing Prairie Pointe Townhomes in Greensburg, Kansas.

  9. West Point Utility System | Open Energy Information

    Open Energy Info (EERE)

    Utility System Jump to: navigation, search Name: West Point Utility System Place: Iowa Phone Number: (319) 837-6313 Website: www.westpointiowa.comwp-utili Facebook: https:...

  10. Wolf Point Substation, Roosevelt County, Montana

    SciTech Connect (OSTI)

    Not Available

    1991-05-01

    The Western Area Power Administration (Western), an agency of the United States Department of Energy, is proposing to construct the 115-kV Wolf Point Substation near Wolf Point in Roosevelt County, Montana (Figure 1). As part of the construction project, Western's existing Wolf Point Substation would be taken out of service. The existing 115-kV Wolf Point Substation is located approximately 3 miles west of Wolf Point, Montana (Figure 2). The substation was constructed in 1949. The existing Wolf Point Substation serves as a Switching Station'' for the 115-kV transmission in the region. The need for substation improvements is based on operational and reliability issues. For this environmental assessment (EA), the environmental review of the proposed project took into account the removal of the old Wolf Point Substation, rerouting of the five Western lines and four lines from the Cooperatives and Montana-Dakota Utilities Company, and the new road into the proposed substation. Reference to the new proposed Wolf Point Substation in the EA includes these facilities as well as the old substation site. The environmental review looked at the impacts to all resource areas in the Wolf Point area. 7 refs., 6 figs.

  11. CenterPoint Energy New Homes Program

    Broader source: Energy.gov [DOE]

    Note: This program is only available to electric customers in CenterPoint Energy's service territory (greater Houston area, Texas). 

  12. Starting Points | National Nuclear Security Administration |...

    National Nuclear Security Administration (NNSA)

    Starting Points Kansas City Plant Related Web Pages Summary Kansas City Plant Home Page Kansas City Plant Contracts DOE Directives NNSA Policy System Kansas City Field Office ...

  13. VPP Points of Contact web version 07092015

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Updated 792015 VPP POINTS OF CONTACT Organization DOE POC Contractor DOE Federal POC Advanced Technologies and Laboratories International, Inc. (ATL)222-S Laboratory Analytical ...

  14. Recovered File 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Livermore National Laboratory Dave Turner, Patrick Heck University of ... ACRF - One-year run complete * Shupe-Turner mixed-phase retrieval compared to ...

  15. Three-point spherical mirror mount

    DOE Patents [OSTI]

    Cutburth, R.W.

    1984-01-23

    A three-point spherical mirror mount for use with lasers is disclosed. The improved mirror mount is adapted to provide a pivot ring having an outer surface with at least three spaced apart mating points to engage an inner spherical surface of a support housing.

  16. Microsoft PowerPoint - DOE O 413 3B Brief v9 with key points...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Example BCP Template Microsoft PowerPoint - DOE O 413 3B Brief v9 with key points in notes Read-Only CD-2, Approve Performance Baseline External Independent Review (EIR) Standard ...

  17. Thermal behaviour of chrome shavings and of sludges recovered after digestion of tanned solid wastes with calcium hydroxide

    SciTech Connect (OSTI)

    Tahiri, S. . E-mail: t_soufiane@yahoo.fr; Albizane, A.; Messaoudi, A.; Azzi, M.; Bennazha, J.; Younssi, S. Alami; Bouhria, M.

    2007-07-01

    The thermal behaviour of chrome shavings and of sludges recovered after digestion of tanned wastes with Ca(OH){sub 2} was studied. Ashes obtained after incineration of wastes at various temperatures were analysed by X-ray diffraction and EDX method. The main crystallized phases present in the ash obtained at 600 deg. C are Cr{sub 2}O{sub 3} and NaCl. The diffractograms revealed an increase in the intensities of the chromium oxide peaks and a very notable decrease of the amount of sodium chloride at 1100 deg. C. EDX analysis revealed a total disappearance of the chlorine peak at this temperature. Scanning electron micrographs show that the waste lost its fibrous aspect when the temperature increases. Formation of aggregates was noted after 550 deg. C. Combustion of organic matters and decarbonation phenomenon are the main stages observed on GTA and DTA curves of sludges. These phenomena are, respectively, exothermic and endothermic. The diffractogram of sludges recorded at 550 deg. C, in the presence of a constant oxygen surplus, revealed the presence of CaCrO{sub 4} and CaCO{sub 3}.

  18. Comparison of coal/solid recovered fuel (SRF) with coal/refuse derived fuel (RDF) in a fluidised bed reactor

    SciTech Connect (OSTI)

    Wagland, S.T.; Kilgallon, P.; Coveney, R.; Garg, A.; Smith, R.; Longhurst, P.J.; Pollard, S.J.T.; Simms, N.

    2011-06-15

    An experimental study was undertaken to compare the differences between municipal solid waste (MSW) derived solid recovered fuel (SRF) (complying with CEN standards) and refuse derived fuel (RDF). Both fuels were co-combusted with coal in a 50 kW fluidised bed combustor and the metal emissions were compared. Synthetic SRF was prepared in the laboratory by grinding major constituents of MSW such as paper, plastic, textile and wood. RDF was obtained from a local mechanical treatment plant. Heavy metal emissions in flue gas and ash samples from the (coal + 10% SRF) fuel mixture were found to be within the acceptable range and were generally lower than that obtained for coal + 10% RDF fuel mixture. The relative distribution of heavy metals in ash components and the flue gas stream shows the presence of a large fraction (up to 98%) of most of the metals in the ash (except Hg and As). Thermo-gravimetric (TG) analysis of SRF constituents was performed to understand the behaviour of fuel mixtures in the absence and presence of air. The results obtained from the experimental study will enhance the confidence of fuel users towards using MSW-derived SRF as an alternative fuel.

  19. Field Demonstration of a Membrane Process to Recover Heavy Hydrocarbons and to Remove Water from Natural Gas

    SciTech Connect (OSTI)

    Kaaeid Lokhandwala

    2003-09-29

    The objective of this project is to design, construct and field demonstrate a membrane system to recover natural gas liquids (NGLs) and remove water from raw natural gas. To convince industry users of the efficiency and reliability of the process, we plan to conduct an extended field test to demonstrate system performance under real-world conditions. The membrane system has been designed and fabricated by Membrane Technology and Research, Inc. (MTR). The MTR membrane system and the compressor are now onsite at BP's Pascagoula, MS plant. The plant is undergoing a very significant expansion and the installation of the membrane unit into the test location is being implemented, albeit at a slower rate than we expected. The startup of the system and conducting of tests will occur in the next six months, depending on the availability of the remaining budget. In the interim, significant commercial progress has been made regarding the introduction of the NGL membrane and systems into the natural gas market.

  20. FIELD DEMONSTRATION OF A MEMBRANE PROCESS TO RECOVER HEAVY HYDROCARBONS AND TO REMOVE WATER FROM NATURAL GAS

    SciTech Connect (OSTI)

    R. Baker; T. Hofmann; J. Kaschemekat; K.A. Lokhandwala; Membrane Group; Module Group; Systems Group

    2001-01-11

    The objective of this project is to design, construct and field demonstrate a 3-MMscfd membrane system to recover natural gas liquids (NGL) and remove water from raw natural gas. An extended field test to demonstrate system performance under real-world conditions is required to convince industry users of the efficiency and reliability of the process. The system will be designed and fabricated by Membrane Technology and Research, Inc. (MTR) and then installed and operated at British Petroleum (BP)-Amoco's Pascagoula, MS plant. The Gas Research Institute will partially support the field demonstration and BP-Amoco will help install the unit and provide onsite operators and utilities. The gas processed by the membrane system will meet pipeline specifications for dewpoint and Btu value and can be delivered without further treatment to the pipeline. Based on data from prior membrane module tests, the process is likely to be significantly less expensive than glycol dehydration followed by propane refrigeration, the principal competitive technology. At the end of this demonstration project the process will be ready for commercialization. The route to commercialization will be developed during this project and may involve collaboration with other companies already servicing the natural gas processing industry.

  1. Anderson Acceleration for Fixed-Point Iterations

    SciTech Connect (OSTI)

    Walker, Homer F.

    2015-08-31

    The purpose of this grant was to support research on acceleration methods for fixed-point iterations, with applications to computational frameworks and simulation problems that are of interest to DOE.

  2. City of Boulder- Green Points Building Program

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Boulder Green Points Building Program is a mandatory residential green building program that requires a builder or homeowner to include a minimum amount of sustainable building components bas...

  3. LMJ Points Plus v2.6

    Energy Science and Technology Software Center (OSTI)

    2013-01-15

    Short summary of the software's functionality: • built-in scan feature to acquire optical image of the surface to be analyzed • click-and-point selection of points of interest on the surface • supporting standalone autosampler/HPLC/MS operation: creating independent batch files after points of interests are selected for LEAPShell (autosampler control software from Leap Technologies) and Analyst® (mass spectrometry (MS) software from AB Sciex) • supporting integrated autosampler/HPLC/MS operation: creating one batch file for all instruments controlledmore » by Analyst® (mass spectrometry software from AB Sciex) after points of interests are selected •creating heatmaps of analytes of interests from collected MS files in a hand-off fashion« less

  4. LMJ Points Plus v2.6

    SciTech Connect (OSTI)

    Kertesz, Vilmos

    2013-01-15

    Short summary of the software's functionality: • built-in scan feature to acquire optical image of the surface to be analyzed • click-and-point selection of points of interest on the surface • supporting standalone autosampler/HPLC/MS operation: creating independent batch files after points of interests are selected for LEAPShell (autosampler control software from Leap Technologies) and Analyst® (mass spectrometry (MS) software from AB Sciex) • supporting integrated autosampler/HPLC/MS operation: creating one batch file for all instruments controlled by Analyst® (mass spectrometry software from AB Sciex) after points of interests are selected •creating heatmaps of analytes of interests from collected MS files in a hand-off fashion

  5. CenterPoint Energy's Energy Wise Program

    Broader source: Energy.gov [DOE]

    CenterPoint Energy's Energy Wise program provides take-home kits containing efficiency devices with classroom and in-home education techniques with the aim to inspire families to adopt new resource...

  6. power point | OpenEI Community

    Open Energy Info (EERE)

    power point Home Jweers's picture Submitted by Jweers(88) Contributor 12 March, 2012 - 14:40 Mockups of the Geothermal Checklist on OpenEI checklist geothermal mockups OpenEI...

  7. CenterPoint Energy Sustainable Schools Program

    Broader source: Energy.gov [DOE]

    The Sustainable Schools Program focuses on energy savings through behavioral and operational improvements, and may be used along with CenterPoint Energy’s SCORE and Load Management programs. It...

  8. Microsoft PowerPoint - Salishan_dpc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    dpc@lanl.gov Salishan Conference on High Performance Computing April 24-27 2006 LA-UR-06-0977 Main points of presentation * Brief history of archival storage at LANL. * More...

  9. Point Power Systems | Open Energy Information

    Open Energy Info (EERE)

    systems, ranging from 1-6kW. It has received support from Environmental Business Cluster, a California-based incubator. References: Point Power Systems1 This article is a...

  10. FortyPoint Seven | Open Energy Information

    Open Energy Info (EERE)

    search Name: FortyPoint Seven Place: England, United Kingdom Zip: BH14 8LQ Sector: Biofuels Product: A Biofuels company founded by John Nicholas, one of Biofuels Corporation...

  11. Starting Points | National Nuclear Security Administration | (NNSA)

    National Nuclear Security Administration (NNSA)

    Starting Points Kansas City Plant Related Web Pages Summary Kansas City Plant Home Page Kansas City Plant Contracts DOE Directives NNSA Policy System Kansas City Field Office (KCFO) Home Page List of Applicable Directives in the Current Contract

  12. PP-412 Lake Erie Application.pdf

    Office of Environmental Management (EM)

  13. Lake Erie Connector Project Environmental Assessment Draft

    Broader source: Energy.gov (indexed) [DOE]

    ... to help support electric demand in Pennsylvania and more ... somewhat in the mid-1940s, but the species is now rare. ... all areas of exposed earth that are not otherwise ...

  14. Lake Erie Connector Project Envrionmental Assessment Appendix...

    Energy Savers [EERE]

    ... The PFBC also asked if the HDVC technology interferes with hydro acoustic telemetry tags ... will be limited to the extent possible to avoid noise and vibration impacts on fish. ...

  15. Erie, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    lse,"poi":true,"imageoverlays":,"markercluster":false,"searchmarkers":"","locations":"text":"","title":"","link":null,"lat":42.1292241,"lon":-80.085059,"alt":0,"address":"","ic...

  16. Lake Erie Connector Project Envrionmental Assessment Appendix...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... over the course of the Project's lifetime; specifically, contributing to a local ... address the limited air emissions resulting from the emergency use of the diesel generator. ...

  17. large-point | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Carbon Dioxide Capture from Large Point Sources Project No.: FG02-04ER83925 SBIR Commercial hollow fiber membrane cartridge. Commercial hollow fiber membrane cartridge [6"(D) X 17"(L)]. (click on image to enlarge) Compact Membrane Systems, Inc. developed and tested a carbon dioxide (CO2) removal system for flue gas streams from large point sources that offers improved mass transfer rates compared to conventional technologies. The project fabricated perfluorinated membranes on

  18. TEPP Points of Contact | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    TEPP Points of Contact TEPP Points of Contact TEPP is a national program managed at a headquarters level and implemented through the TEPP Central Operations Center managed by Technical Resources Group, Inc. For additional information on the TEPP, or to find out how you can obtain TEPP materials or schedule a class, contact either the HQ Program Manager or TEPP Central Operations. EM Contact EM Headquarters Program Manager Ellen Edge, Office of Transportation Ellen.Edge@em.doe.gov U.S. Department

  19. 2014 PowerPoint Template Version 1.1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and COBRA-TF Predict Mixing & DNB with CFD using STAR or HYDRA-TH GTRF Predict Minimum ... to recover margin in safety assessments * CFD to be applied for inlet boundary conditions ...

  20. POINT OF CONTACT RESPONSIBILITIES FOR RECORDS MANAGEMENT | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    POINT OF CONTACT RESPONSIBILITIES FOR RECORDS MANAGEMENT POINT OF CONTACT RESPONSIBILITIES FOR RECORDS MANAGEMENT A list of point of contact responsibilites for Records Management...

  1. Effect of Hurricane Andrew on the Turkey Point Nuclear Generating Station from August 20--30, 1992. [Final report

    SciTech Connect (OSTI)

    Hebdon, F.J.

    1993-03-01

    On August 24, 1992, Hurricane Andrew, a Category 4 hurricane, struck the Turkey Point Electrical Generating Station with sustained winds of 145 mph (233 km/h). This is the report of the team that the US Nuclear Regulatory Commission (NRC) and the Institute of Nuclear Power Operations (INPO) jointly sponsored (1) to review the damage that the hurricane caused the nuclear units and the utility`s actions to prepare for the storm and recover from it, and (2) to compile lessons that might benefit other nuclear reactor facilities.

  2. Hot Springs Point Geothermal Project | Open Energy Information

    Open Energy Info (EERE)

    Point Geothermal Project Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Development Project: Hot Springs Point Geothermal Project Project Location Information...

  3. Nanotexturing of surfaces to reduce melting point.

    SciTech Connect (OSTI)

    Garcia, Ernest J.; Zubia, David; Mireles, Jose; Marquez, Noel; Quinones, Stella

    2011-11-01

    This investigation examined the use of nano-patterned structures on Silicon-on-Insulator (SOI) material to reduce the bulk material melting point (1414 C). It has been found that sharp-tipped and other similar structures have a propensity to move to the lower energy states of spherical structures and as a result exhibit lower melting points than the bulk material. Such a reduction of the melting point would offer a number of interesting opportunities for bonding in microsystems packaging applications. Nano patterning process capabilities were developed to create the required structures for the investigation. One of the technical challenges of the project was understanding and creating the specialized conditions required to observe the melting and reshaping phenomena. Through systematic experimentation and review of the literature these conditions were determined and used to conduct phase change experiments. Melting temperatures as low as 1030 C were observed.

  4. Phase-shifting point diffraction interferometer

    DOE Patents [OSTI]

    Medecki, H.

    1998-11-10

    Disclosed is a point diffraction interferometer for evaluating the quality of a test optic. In operation, the point diffraction interferometer includes a source of radiation, the test optic, a beam divider, a reference wave pinhole located at an image plane downstream from the test optic, and a detector for detecting an interference pattern produced between a reference wave emitted by the pinhole and a test wave emitted from the test optic. The beam divider produces separate reference and test beams which focus at different laterally separated positions on the image plane. The reference wave pinhole is placed at a region of high intensity (e.g., the focal point) for the reference beam. This allows reference wave to be produced at a relatively high intensity. Also, the beam divider may include elements for phase shifting one or both of the reference and test beams. 8 figs.

  5. Phase-shifting point diffraction interferometer

    DOE Patents [OSTI]

    Medecki, Hector

    1998-01-01

    Disclosed is a point diffraction interferometer for evaluating the quality of a test optic. In operation, the point diffraction interferometer includes a source of radiation, the test optic, a beam divider, a reference wave pinhole located at an image plane downstream from the test optic, and a detector for detecting an interference pattern produced between a reference wave emitted by the pinhole and a test wave emitted from the test optic. The beam divider produces separate reference and test beams which focus at different laterally separated positions on the image plane. The reference wave pinhole is placed at a region of high intensity (e.g., the focal point) for the reference beam. This allows reference wave to be produced at a relatively high intensity. Also, the beam divider may include elements for phase shifting one or both of the reference and test beams.

  6. Tribal Points of Contacts | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Points of Contacts Tribal Points of Contacts US DOE-Office of Environmental Management 1000 Independence Avenue, SW Washington, DC 20585 ph: (202) 586-5944 fax: (202) 586-5000 Richland Operations Office- Hanford Indian Nations Program P.O. Box 550- MSIN A7-75 Richland, WA 99352 ph: (509) 376-6332 fax: (509) 376-1563 West Valley Demonstration Project Tribal Government Liaison P.O. Box 191- 10282 Rock Springs Road West Valley, NY 14171 ph: (716) 942-4629 fax: (716) 942-2068 Albuquerque Operations

  7. Remote temperature-set-point controller

    DOE Patents [OSTI]

    Burke, William F.; Winiecki, Alan L.

    1986-01-01

    An instrument for carrying out mechanical strain tests on metallic samples with the addition of an electrical system for varying the temperature with strain, the instrument including opposing arms and associated equipment for holding a sample and varying the mechanical strain on the sample through a plurality of cycles of increasing and decreasing strain within predetermined limits, circuitry for producing an output signal representative of the strain during the tests, apparatus including a set point and a coil about the sample for providing a controlled temperature in the sample, and circuitry interconnected between the strain output signal and set point for varying the temperature of the sample linearly with strain during the tests.

  8. Non-lead hollow point bullet

    DOE Patents [OSTI]

    Vaughn, Norman L.; Lowden, Richard A.

    2003-04-15

    The non-lead hollow point bullet of the instant invention comprises a mixed construction slug further comprising, a monolithic metal insert having a tapered (preferred conical) hollow point tip and a tapered (preferred conical) tail protrusion, and an unsintered powdered metal composite core in tandem alignment with the insert. The core has a hollow tapered (preferred conical) cavity tip portion coupled with the tapered (preferred conical) tail protrusion on the insert. An open tip jacket envelops at least a portion of the insert and the core. The jacket is swaged at the open tip.

  9. Remote temperature-set-point controller

    DOE Patents [OSTI]

    Burke, W.F.; Winiecki, A.L.

    1984-10-17

    An instrument is described for carrying out mechanical strain tests on metallic samples with the addition of means for varying the temperature with strain. The instrument includes opposing arms and associated equipment for holding a sample and varying the mechanical strain on the sample through a plurality of cycles of increasing and decreasing strain within predetermined limits, circuitry for producing an output signal representative of the strain during the tests, apparatus including a a set point and a coil about the sample for providing a controlled temperature in the sample, and circuitry interconnected between the strain output signal and set point for varying the temperature of the sample linearly with strain during the tests.

  10. New York Nuclear Profile - Indian Point

    U.S. Energy Information Administration (EIA) Indexed Site

    Indian Point" "Unit","Summer capacity (mw)","Net generation (thousand mwh)","Summer capacity factor (percent)","Type","Commercial operation date","License expiration date" 2,"1,022","7,326",81.8,"PWR","application/vnd.ms-excel","application/vnd.ms-excel"

  11. EIS-0153: Niagara Import Point Project

    Broader source: Energy.gov [DOE]

    The Federal Energy Regulatory Commission prepared this statement to assess the environmental impacts of the proposed Niagara Import Point project that would construct an interstate natural gas pipeline to transport gas from Canada and domestic sources to the Northeastern United States market. The U.S. Department of Energy's Office of Fossil Energy was a cooperating agency during statement development and adopted this statement on 6/15/1990.

  12. Low-melting point heat transfer fluid

    DOE Patents [OSTI]

    Cordaro, Joseph Gabriel; Bradshaw, Robert W.

    2010-11-09

    A low-melting point, heat transfer fluid made of a mixture of five inorganic salts including about 29.1-33.5 mol % LiNO.sub.3, 0-3.9 mol % NaNO.sub.3, 2.4-8.2 mol % KNO.sub.3, 18.6-19.9 mol % NaNO.sub.2, and 40-45.6 mol % KNO.sub.2. These compositions can have liquidus temperatures below 80.degree. C. for some compositions.

  13. High speed point derivative microseismic detector

    DOE Patents [OSTI]

    Uhl, James Eugene; Warpinski, Norman Raymond; Whetten, Ernest Blayne

    1998-01-01

    A high speed microseismic event detector constructed in accordance with the present invention uses a point derivative comb to quickly and accurately detect microseismic events. Compressional and shear waves impinging upon microseismic receiver stations disposed to collect waves are converted into digital data and analyzed using a point derivative comb including assurance of quiet periods prior to declaration of microseismic events. If a sufficient number of quiet periods have passed, the square of a two point derivative of the incoming digital signal is compared to a trip level threshold exceeding the determined noise level to declare a valid trial event. The squaring of the derivative emphasizes the differences between noise and signal, and the valid event is preferably declared when the trip threshold has been exceeded over a temporal comb width to realize a comb over a given time period. Once a trial event has been declared, the event is verified through a spatial comb, which applies the temporal event comb to additional stations. The detector according to the present invention quickly and accurately detects initial compressional waves indicative of a microseismic event which typically exceed the ambient cultural noise level by a small amount, and distinguishes the waves from subsequent larger amplitude shear waves.

  14. High speed point derivative microseismic detector

    DOE Patents [OSTI]

    Uhl, J.E.; Warpinski, N.R.; Whetten, E.B.

    1998-06-30

    A high speed microseismic event detector constructed in accordance with the present invention uses a point derivative comb to quickly and accurately detect microseismic events. Compressional and shear waves impinging upon microseismic receiver stations disposed to collect waves are converted into digital data and analyzed using a point derivative comb including assurance of quiet periods prior to declaration of microseismic events. If a sufficient number of quiet periods have passed, the square of a two point derivative of the incoming digital signal is compared to a trip level threshold exceeding the determined noise level to declare a valid trial event. The squaring of the derivative emphasizes the differences between noise and signal, and the valid event is preferably declared when the trip threshold has been exceeded over a temporal comb width to realize a comb over a given time period. Once a trial event has been declared, the event is verified through a spatial comb, which applies the temporal event comb to additional stations. The detector according to the present invention quickly and accurately detects initial compressional waves indicative of a microseismic event which typically exceed the ambient cultural noise level by a small amount, and distinguishes the waves from subsequent larger amplitude shear waves. 9 figs.

  15. Approximate Model for Turbulent Stagnation Point Flow.

    SciTech Connect (OSTI)

    Dechant, Lawrence

    2016-01-01

    Here we derive an approximate turbulent self-similar model for a class of favorable pressure gradient wedge-like flows, focusing on the stagnation point limit. While the self-similar model provides a useful gross flow field estimate this approach must be combined with a near wall model is to determine skin friction and by Reynolds analogy the heat transfer coefficient. The combined approach is developed in detail for the stagnation point flow problem where turbulent skin friction and Nusselt number results are obtained. Comparison to the classical Van Driest (1958) result suggests overall reasonable agreement. Though the model is only valid near the stagnation region of cylinders and spheres it nonetheless provides a reasonable model for overall cylinder and sphere heat transfer. The enhancement effect of free stream turbulence upon the laminar flow is used to derive a similar expression which is valid for turbulent flow. Examination of free stream enhanced laminar flow suggests that the rather than enhancement of a laminar flow behavior free stream disturbance results in early transition to turbulent stagnation point behavior. Excellent agreement is shown between enhanced laminar flow and turbulent flow behavior for high levels, e.g. 5% of free stream turbulence. Finally the blunt body turbulent stagnation results are shown to provide realistic heat transfer results for turbulent jet impingement problems.

  16. Agency Points of Contact for Tribal Consultation Agency Point of Contact Email and Phone

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Agency Points of Contact for Tribal Consultation Agency Point of Contact Email and Phone Department of the Interior Sarah Harris Chief of Staff to the Assist Secretary - Indian Affairs Tribalconsultation@bia.gov (202) 208-7163 Department of Justice Tracy Toulou Director, Office of Tribal Justice OTJ@usdoj.gov (202) 514-8812 Department of State Reta Lewis Special Representative for Global Intergovernmental Affairs tribalconsultation@state.gov (202) 647-7710 Department of the Treasury Alexander

  17. Wax Point Determinations Using Acoustic Resonance Spectroscopy

    SciTech Connect (OSTI)

    Bostick, D.T.; Jubin, R.T.; Schmidt, T.W.

    2001-06-01

    The thermodynamic characterization of the wax point of a given crude is essential in order to maintain flow conditions that prevent plugging of undersea pipelines. This report summarizes the efforts made towards applying an Acoustic Cavity Resonance Spectrometer (ACRS) to the determination of pressures and temperatures at which wax precipitates from crude. Phillips Petroleum Company, Inc., the CRADA participant, supplied the ACRS. The instrumentation was shipped to Dr. Thomas Schmidt of ORNL, the CRADA contractor, in May 2000 after preliminary software development performed under the guidance of Dr. Samuel Colgate and Dr. Evan House of the University of Florida, Gainesville, Fl. Upon receipt it became apparent that a number of modifications still needed to be made before the ACRS could be precisely and safely used for wax point measurements. This report reviews the sequence of alterations made to the ACRS, as well as defines the possible applications of the instrumentation once the modifications have been completed. The purpose of this Cooperative Research and Development Agreement (CRADA) between Phillips Petroleum Company, Inc. (Participant) and Lockheed Martin Energy Research Corporation (Contractor) was the measurement of the formation of solids in crude oils and petroleum products that are commonly transported through pipelines. This information is essential in the proper design, operation and maintenance of the petroleum pipeline system in the United States. Recently, new petroleum discoveries in the Gulf of Mexico have shown that there is a potential for plugging of undersea pipeline because of the precipitation of wax. It is important that the wax points of the expected crude oils be well characterized so that the production facilities for these new wells are capable of properly transporting the expected production. The goal of this work is to perform measurements of solids formation in crude oils and petroleum products supplied by the Participant. It is

  18. Undercompensated Kondo Impurity with Quantum Critical Point

    SciTech Connect (OSTI)

    Schlottmann, P.

    2000-02-14

    The low-temperature properties of a magnetic impurity of spin S interacting with an electron gas via anisotropic spin exchange are studied via Bethe's ansatz. For S>1/2 the impurity is only partially compensated at T=0 , leaving an effective spin that is neither integer nor half integer. The entropy has an essential singularity at H=T=0 , and the susceptibility and the specific heat follow power laws of H and T with nonuniversal exponents, which are the consequence of a quantum critical point. The results for the generalization to an arbitrary number of channels are also reported. (c) 2000 The American Physical Society.

  19. CONTINUOUS ANALYZER UTILIZING BOILING POINT DETERMINATION

    DOE Patents [OSTI]

    Pappas, W.S.

    1963-03-19

    A device is designed for continuously determining the boiling point of a mixture of liquids. The device comprises a distillation chamber for boiling a liquid; outlet conduit means for maintaining the liquid contents of said chamber at a constant level; a reflux condenser mounted above said distillation chamber; means for continuously introducing an incoming liquid sample into said reflux condenser and into intimate contact with vapors refluxing within said condenser; and means for measuring the temperature of the liquid flowing through said distillation chamber. (AEC)

  20. Microsoft PowerPoint - 8 Greg Flach

    Office of Environmental Management (EM)

    org SRNL-MS-2014-00605 Advanced Simulation Capability for Environmental Management ASCEM Software Capabilities and Performance Assessment Deployments Greg Flach ASCEM Site Applications Team Performance & Risk Assessment Community of Practice Technical Exchange Meeting December 11-12, 2014 Las Vegas NM ascemdoe.org SRNL-MS-2014-00605 1 ASCEM Points of Contact HPC Thrust David Moulton (moulton@lanl.gov; 505-665-4712) Platform Thrust Vicky Freedman (vicky.freedman@pnnl.gov; 509-372-4067) Site

  1. FPD's Perspective Talking Points - Los Alamos National Labratory...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FPD's Perspective Talking Points - Los Alamos National Labratory - NISA 2014 DOE Project Management Workshop 30FPD PerspectiveTalking Points.pdf (1.11 MB) More Documents & ...

  2. Zero point energy of renormalized Wilson loops (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    Zero point energy of renormalized Wilson loops Citation Details In-Document Search Title: Zero point energy of renormalized Wilson loops The quark-antiquark potential, and its ...

  3. Microsoft PowerPoint - Executive Order13423rbl | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Executive Order13423rbl Microsoft PowerPoint - Executive Order13423rbl PDF icon Microsoft PowerPoint - Executive Order13423rbl More Documents & Publications OPAM Policy Acquisition ...

  4. EA-1967: Hills Creek-Lookout Point Transmission Line Rebuild...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    967: Hills Creek-Lookout Point Transmission Line Rebuild, Lane County, Oregon EA-1967: Hills Creek-Lookout Point Transmission Line Rebuild, Lane County, Oregon Summary Bonneville ...

  5. MissionPoint Capital Partners | Open Energy Information

    Open Energy Info (EERE)

    MissionPoint Capital Partners Jump to: navigation, search Name: MissionPoint Capital Partners Place: Norwalk, Connecticut Zip: CT 06854 Product: Private Investment company...

  6. OpenEI:Neutral point of view | Open Energy Information

    Open Energy Info (EERE)

    point of view Jump to: navigation, search Neutral point of view (NPOV) means that articles and content contributed or edited on the platform must be unbiased. All significant...

  7. City of Strawberry Point, Iowa (Utility Company) | Open Energy...

    Open Energy Info (EERE)

    Strawberry Point, Iowa (Utility Company) Jump to: navigation, search Name: City of Strawberry Point Place: Iowa Phone Number: 563-933-4482 Website: www.strawberrypt.com Facebook:...

  8. Microsoft PowerPoint - Tsinghua Slideshow final for distribution...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tsinghua Slideshow final for distribution (2) Microsoft PowerPoint - Tsinghua Slideshow final for distribution (2) PDF icon Microsoft PowerPoint - Tsinghua Slideshow final for ...

  9. Microsoft PowerPoint - Final translated version of Tsinghua Speech...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Final translated version of Tsinghua Speech Microsoft PowerPoint - Final translated version of Tsinghua Speech PDF icon Microsoft PowerPoint - Final translated version of Tsinghua ...

  10. Self-Regulation Mechanism for Charged Point Defects in Hybrid...

    Office of Scientific and Technical Information (OSTI)

    Accepted Manuscript: Self-Regulation Mechanism for Charged Point Defects in Hybrid Halide Perovskites Title: Self-Regulation Mechanism for Charged Point Defects in Hybrid Halide ...

  11. Vantage Point Venture Partners (Canada) | Open Energy Information

    Open Energy Info (EERE)

    Canada) Jump to: navigation, search Logo: Vantage Point Venture Partners (Canada) Name: Vantage Point Venture Partners (Canada) Address: 1200 McGill College, Suite 1240 Place:...

  12. Windy Point (08) Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    (08) Wind Farm Jump to: navigation, search Name Windy Point (08) Wind Farm Facility Windy Point (08) Sector Wind energy Facility Type Commercial Scale Wind Facility Status In...

  13. Windy Point - Siemens Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    Siemens Wind Farm Jump to: navigation, search Name Windy Point - Siemens Wind Farm Facility Windy Point - Siemens Sector Wind energy Facility Type Commercial Scale Wind Facility...

  14. Windy Point - REpower (09) Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    REpower (09) Wind Farm Jump to: navigation, search Name Windy Point - REpower (09) Wind Farm Facility Windy Point - REpower (09) Sector Wind energy Facility Type Commercial Scale...

  15. Recommendation 217: Stewardship Point of Contact for the Oak...

    Office of Environmental Management (EM)

    7: Stewardship Point of Contact for the Oak Ridge Reservation Recommendation 217: Stewardship Point of Contact for the Oak Ridge Reservation The Oak Ridge Site Specific Advisory...

  16. Topological phase diagram and saddle point singularity in a tunable...

    Office of Scientific and Technical Information (OSTI)

    Topological phase diagram and saddle point singularity in a tunable topological ... Title: Topological phase diagram and saddle point singularity in a tunable topological ...

  17. A NEW METHOD TO CORRECT FOR FIBER COLLISIONS IN GALAXY TWO-POINT STATISTICS

    SciTech Connect (OSTI)

    Guo Hong; Zehavi, Idit; Zheng Zheng

    2012-09-10

    In fiber-fed galaxy redshift surveys, the finite size of the fiber plugs prevents two fibers from being placed too close to one another, limiting the ability to study galaxy clustering on all scales. We present a new method for correcting such fiber collision effects in galaxy clustering statistics based on spectroscopic observations. The target galaxy sample is divided into two distinct populations according to the targeting algorithm of fiber placement, one free of fiber collisions and the other consisting of collided galaxies. The clustering statistics are a combination of the contributions from these two populations. Our method makes use of observations in tile overlap regions to measure the contributions from the collided population, and to therefore recover the full clustering statistics. The method is rooted in solid theoretical ground and is tested extensively on mock galaxy catalogs. We demonstrate that our method can well recover the projected and the full three-dimensional (3D) redshift-space two-point correlation functions (2PCFs) on scales both below and above the fiber collision scale, superior to the commonly used nearest neighbor and angular correction methods. We discuss potential systematic effects in our method. The statistical correction accuracy of our method is only limited by sample variance, which scales down with (the square root of) the volume probed. For a sample similar to the final SDSS-III BOSS galaxy sample, the statistical correction error is expected to be at the level of 1% on scales {approx}0.1-30 h {sup -1} Mpc for the 2PCFs. The systematic error only occurs on small scales, caused by imperfect correction of collision multiplets, and its magnitude is expected to be smaller than 5%. Our correction method, which can be generalized to other clustering statistics as well, enables more accurate measurements of full 3D galaxy clustering on all scales with galaxy redshift surveys.

  18. Low-melting point heat transfer fluid

    DOE Patents [OSTI]

    Cordaro, Joseph G.; Bradshaw, Robert W.

    2011-04-12

    A low-melting point, heat transfer fluid comprising a mixture of LiNO.sub.3, NaNO.sub.3, KNO.sub.3, NaNO.sub.2 and KNO.sub.2 salts where the Li, Na and K cations are present in amounts of about 20-33.5 mol % Li, about 18.6-40 mol % Na, and about 40-50.3 mol % K and where the nitrate and nitrite anions are present in amounts of about 36-50 mol % NO.sub.3, and about 50-62.5 mol % NO.sub.2. These compositions can have liquidus temperatures between 70.degree. C. and 80.degree. C. for some compositions.

  19. Laser beam centering and pointing system

    DOE Patents [OSTI]

    Rushford, Michael Charles

    2015-01-13

    An optical instrument aligns an optical beam without the need for physical intervention of the instrument within the apparatus or platforms from which the trajectory of the beam to be ascertained. The alignment apparatus and method enable the desired function to be realized without the placement of physical apertures or sensors directly in the path of the beam through the system whose spatial position and slope is to be sought. An image plane provides the observer with a pair of well-defined images that are indicative of the beam centering and pointing alignment parameters. The optical alignment can be realized without the need for referencing to an external or fixed set of coordinates or fiducials. The instrument can therefore service situations where adverse environments would otherwise prohibit the use of such instruments, including regions of high radiation, high temperature, vacuum and/or cryogenic atmospheres.

  20. Experiments of one-point cold fusion

    SciTech Connect (OSTI)

    Matsumoto, Takaaki )

    1993-11-01

    Experiments of one-point cold fusion have been performed by electrical discharging in ordinary and heavy water mixed with 0.6 mol/l potassium carbonate. A platinum pin anode was located perpendicular to a copper plate cathode. After discharge, the surfaces of the copper plates were examined by an optical microscope. Many ring spots caused by gravity decay of single and di-neutrons were separately distributed on the plates. Furthermore, several kinds of traces that might be produced by itonic hydrogen clusters and by tiny black and white holes were observed. The mechanisms of cold fusion by electrical discharge are also discussed in terms of the Nattoh model. 13 refs., 12 figs.

  1. Use of Air2Air Technology to Recover Fresh-Water from the Normal Evaporative Cooling Loss at Coal-Based Thermoelectric Power Plants

    SciTech Connect (OSTI)

    Ken Mortensen

    2009-06-30

    This program was undertaken to build and operate the first Air2Air{trademark} Water Conservation Cooling Tower at a power plant, giving a validated basis and capability for water conservation by this method. Air2Air{trademark} water conservation technology recovers a portion of the traditional cooling tower evaporate. The Condensing Module provides an air-to-air heat exchanger above the wet fill media, extracting the heat from the hot saturated moist air leaving in the cooling tower and condensing water. The rate of evaporate water recovery is typically 10%-25% annually, depending on the cooling tower location (climate).

  2. Seismic Analysis of Morrow Point Dam

    SciTech Connect (OSTI)

    Noble, C R

    2002-04-01

    The main objective of this study is to perform nonlinear dynamic earthquake time history analyses on Morrow Point Dam, which is located 263 km southwest of Denver, Colorado. This project poses many significant technical challenges, one of which is to model the entire Morrow Point Dam/Foundation Rock/Reservoir system which includes accurate geology topography. In addition, the computational model must be initialized to represent the existing dead loads on the structure and the stress field caused by the dead loads. To achieve the correct dead load stress field due to gravity and hydrostatic load, the computer model must account for the manner in which the dams were constructed. Construction of a dam finite element model with the correct as-built geometry of the dam structure and simply ''turning on'' gravity in the computer model will generally lead to an incorrect initial stress field in the structure. The sequence of segmented lifts typical of dam construction has a significant impact on the static stress fields induced in the dam. In addition, the dam model must also account for the interaction between the adjacent dam segments across the dam contraction joints. As a result of these challenges, it was determined that a significant amount of code development was required in order to accurately simulate the motion of the dam structure. Modifications to the existing slide surfaces are needed to allow for appropriate modeling of the shear keys across the contraction joints. Furthermore, a model for hydrodynamic interaction was also implemented into NIKE3D and DYNA3D for fluid representation in the 3D dam system finite element model. Finally, the modeling of the 3D dam system results in a very large computational model, which makes it difficult to perform a static initialization using an implicit code. Traditionally, for these large models, the model has been initialized over a long time scale using an explicit code. However, recent advancements have made it possible

  3. Practical Point-to-Point Free-Space Quantum Key Distribution over 1/2 KM

    SciTech Connect (OSTI)

    Buttler, W.T.; Hughes, R.J.; Kwiat, P.G.; Lamoreaux, S.K.; Morgan, G.L.; Peterson, C.G.

    1999-02-01

    We have demonstrated point-to-point single-photon quantum key distribution (QKD) over a free-space optical path of {approximately}475 m under daylight conditions. This represents an increase of >1,000 times farther than any reported point-to-point demonstration, and >6 times farther than the previous folded path daylight demonstration. We expect to extend the daylight range to 2 km or more within the next few months. A brief description of the system is given here. The QKD transmitter, a.k.a. ''Alice'' (Fig. 1), consists of three thermoelectrically cooled diode lasers, a single interference filter (IF), two optical attenuators, two linear polarizers, two non-polarization beam-splitters (BSs), and a 27x beam expander. The two data-lasers' (dim-lasers') wavelengths are temperature controlled and constrained by the IF to {approximately}773 {+-} 0.5 nm, while the transmitted wavelength of the bright-laser (timing-laser) is {approximately}768 nm; the data-lasers are configured to emit a weak pulse of approximately 1 ns duration. The transmitter incorporates no active polarization switching--a first in QKD.

  4. Microsoft PowerPoint - DOE O 413 3B Brief v9 with key points in notes

    Office of Environmental Management (EM)

    [Read-Only] | Department of Energy DOE O 413 3B Brief v9 with key points in notes [Read-Only] Microsoft PowerPoint - DOE O 413 3B Brief v9 with key points in notes [Read-Only] Microsoft PowerPoint - DOE O 413 3B Brief v9 with key points in notes [Read-Only] (2.08 MB) More Documents & Publications Example BCP Template Microsoft PowerPoint - DOE O 413 3B Brief v9 with key points in notes [Read-Only] CD-2, Approve Performance Baseline External Independent Review (EIR) Standard Operating

  5. Dual-domain point diffraction interferometer

    DOE Patents [OSTI]

    Naulleau, Patrick P.; Goldberg, Kenneth Alan

    2000-01-01

    A hybrid spatial/temporal-domain point diffraction interferometer (referred to as the dual-domain PS/PDI) that is capable of suppressing the scattered-reference-light noise that hinders the conventional PS/PDI is provided. The dual-domain PS/PDI combines the separate noise-suppression capabilities of the widely-used phase-shifting and Fourier-transform fringe pattern analysis methods. The dual-domain PS/PDI relies on both a more restrictive implementation of the image plane PS/PDI mask and a new analysis method to be applied to the interferograms generated and recorded by the modified PS/PDI. The more restrictive PS/PDI mask guarantees the elimination of spatial-frequency crosstalk between the signal and the scattered-light noise arising from scattered-reference-light interfering with the test beam. The new dual-domain analysis method is then used to eliminate scattered-light noise arising from both the scattered-reference-light interfering with the test beam and the scattered-reference-light interfering with the "true" pinhole-diffracted reference light. The dual-domain analysis method has also been demonstrated to provide performance enhancement when using the non-optimized standard PS/PDI design. The dual-domain PS/PDI is essentially a three-tiered filtering system composed of lowpass spatial-filtering the test-beam electric field using the more restrictive PS/PDI mask, bandpass spatial-filtering the individual interferogram irradiance frames making up the phase-shifting series, and bandpass temporal-filtering the phase-shifting series as a whole.

  6. Compound nucleus decay: Comparison between saddle point and scission point barriers

    SciTech Connect (OSTI)

    Santos, T. J.; Carlson, B. V.

    2014-11-11

    One of the principal characteristics of nuclear multifragmentation is the emission of complex fragments of intermediate mass. An extension of the statistical multifragmentation model has been developed, in which the process can be interpreted as the near simultaneous limit of a series of sequential binary decays. In this extension, intermediate mass fragment emissions are described by expressions almost identical to those of light particle emission. At lower temperatures, similar expressions have been shown to furnish a good description of very light intermediate mass fragment emission but not of the emission of heavier fragments, which seems to be determined by the transition density at the saddle-point rather than at the scission point. Here, we wish to compare these different formulations of intermediate fragmment emission and analyze the extent to which they remain distinguishable at high excitation energy.

  7. Improvements in floating point addition/subtraction operations

    DOE Patents [OSTI]

    Farmwald, P.M.

    1984-02-24

    Apparatus is described for decreasing the latency time associated with floating point addition and subtraction in a computer, using a novel bifurcated, pre-normalization/post-normalization approach that distinguishes between differences of floating point exponents.

  8. City of West Point, Nebraska (Utility Company) | Open Energy...

    Open Energy Info (EERE)

    Name: West Point Municipal Power Place: Nebraska Phone Number: 402.372.2466 Website: www.ci.west-point.ne.usutilit Outage Hotline: After Hours (402) 372-6009 References: EIA Form...

  9. Microsoft PowerPoint - WH Energy and Climate Stakeholders 10...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    WH Energy and Climate Stakeholders 10-7-09 final.ppt Microsoft PowerPoint - WH Energy and Climate Stakeholders 10-7-09 final.ppt PDF icon Microsoft PowerPoint - WH Energy and ...

  10. ZeroPoint Clean Technology Inc | Open Energy Information

    Open Energy Info (EERE)

    ZeroPoint Clean Technology Inc Jump to: navigation, search Name: ZeroPoint Clean Technology Inc Place: New York, New York Zip: 13676 Sector: Biomass Product: Developing of biomass...

  11. CenterPoint Energy Advanced Residential Lighting Program

    Office of Energy Efficiency and Renewable Energy (EERE)

    CenterPoint Energy’s Advanced Lighting program provides a point-of-sale discount on the purchase of selected Energy Star® rated LED products, such as screw-in LEDs and LED fixtures, which are...

  12. Microsoft PowerPoint - 05 Okonski final Project Management Workshop...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Okonski final Project Management Workshop Slides O'Konski Microsoft PowerPoint - 05 Okonski final Project Management Workshop Slides O'Konski Microsoft PowerPoint - 05 Okonski ...

  13. Four Corners methane hotspot points to coal-related sources

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Methane hotspot points to coal-related sources Four Corners methane hotspot points to coal-related sources Methane is very efficient at trapping heat in the atmosphere and, like ...

  14. CenterPoint Energy Low-Rise Multi Family Program

    Broader source: Energy.gov [DOE]

    Note: This Incentive is only available to customers in the CenterPoint Energy Houston electric territory.

  15. CenterPoint Energy- Residential and Small Commercial Efficiency Program

    Office of Energy Efficiency and Renewable Energy (EERE)

    Note: Rebate Incentives are only available to CenterPoint Energy electric customers in the greater Houston area, Texas.

  16. PowerPoint Presentation Templates | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Templates » PowerPoint Presentation Templates PowerPoint Presentation Templates The Office of Energy Efficiency and Renewable Energy (EERE) PowerPoint templates can be used for all EERE presentations. They provide a consistent look and feel for all presentations given by the EERE's offices. The templates below do not include any content or material. All templates are available in Microsoft PowerPoint 2010. Calibri is the default font for all templates. Larger Image Template This template has

  17. CenterPoint Energy- Commercial and Industrial Energy Efficiency Programs

    Broader source: Energy.gov [DOE]

    Note: This program only applies to electric customers of CenterPoint Energy in the greater Houston area, Texas.

  18. CenterPoint Energy Healthcare Energy Efficiency Program

    Broader source: Energy.gov [DOE]

    Note: Program is only available to electric customers in CenterPoint Energy's service territory (greater Houston, Texas area)

  19. Suggested Talking Points for Hydrogen Road Tour | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Suggested Talking Points for Hydrogen Road Tour Suggested Talking Points for Hydrogen Road Tour Suggested Talking Points for Hydrogen Road Tour (113.63 KB) More Documents & Publications Clean, Efficient, and Reliable Power for the 21st Century: Fact Sheet State of the States: Fuel Cells in America 2010 State of the States: Fuel Cells in America 2012

  20. Methods for recovering a solvent from a fluid volume and methods of removing at least one compound from a nonpolar solvent

    DOE Patents [OSTI]

    Ginosar, Daniel M.; Wendt, Daniel S.; Petkovic, Lucia M.

    2014-06-10

    A method of removing a nonpolar solvent from a fluid volume that includes at least one nonpolar compound, such as a fat, an oil or a triglyceride, is provided. The method comprises contacting a fluid volume with an expanding gas to expand the nonpolar solvent and form a gas-expanded solvent. The gas-expanded solvent may have a substantially reduced density in comparison to the at least one nonpolar compound and/or a substantially reduced capacity to solubilize the nonpolar compound, causing the nonpolar compounds to separate from the gas-expanded nonpolar solvent into a separate liquid phase. The liquid phase including the at least one nonpolar compound may be separated from the gas-expanded solvent using conventional techniques. After separation of the liquid phase, at least one of the temperature and pressure may be reduced to separate the nonpolar solvent from the expanding gas such that the nonpolar solvent may be recovered and reused.

  1. Spiral concentrators recover fine coal

    SciTech Connect (OSTI)

    Fiscor, S.

    2005-12-15

    Compound spirals offer better performance in a more efficient configuration. Prep plant operators in the US are increasingly opting to use spiral concentrators. They are easy to install, operate and maintain but their downfall is low capacity. The article describes spirals available from PrepTech/Multotec, Krebs Engineers and Roche MT. It reports on research on spiral concentrator technology. 1 ref., 4 figs.

  2. FPD's Perspective Talking Points - Los Alamos National Labratory - NISA |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy FPD's Perspective Talking Points - Los Alamos National Labratory - NISA FPD's Perspective Talking Points - Los Alamos National Labratory - NISA 2014 DOE Project Management Workshop 30_FPD Perspective_Talking Points.pdf (1.11 MB) More Documents & Publications FPD's Perspective Photos - Los Alamos National Labratory - NISA 2012 Annual Workforce Analysis and Staffing Plan Report - Los Alamos Field Office Aligning Contract Incentives

  3. Talking Points for Communicating with Employees about PEVs | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Talking Points for Communicating with Employees about PEVs Talking Points for Communicating with Employees about PEVs Your decision to offer workplace charging can increase PEV awareness among current and potential employees. Use these talking points in employee communications, such as internal newsletters, social media, and presentations. Why is Workplace Charging Important? The U.S. imports about 8 million barrels of oil daily. Approximately 65% of that oil is used in the

  4. DOE - Office of Legacy Management -- Exxon Ray Point Site - 032

    Office of Legacy Management (LM)

    Exxon Ray Point Site - 032 FUSRAP Considered Sites Site: Exxon Ray Point Site (032) Active UMTRCA Title II site; when complete, site will be managed by LM Designated Name: Not Designated under FUSRAP Alternate Name: Ray Point, TX, Disposal Site Location: Live Oak County, Texas Evaluation Year: Not considered for FUSRAP - in another program Site Operations: Disposal site Site Disposition: Remediation under UMTRCA Title II - site not ready to transition Radioactive Materials Handled: Yes Primary

  5. CenterPoint Energy A/C Distributor Program

    Broader source: Energy.gov [DOE]

    Note:  This incentive is only available to customers within CenterPoint Energy’s electric service territory (greater Houston area, Texas)

  6. MHK Projects/Williams Point Project | Open Energy Information

    Open Energy Info (EERE)

    Williams Point Project < MHK Projects Jump to: navigation, search << Return to the MHK database homepage Loading map... "minzoom":false,"mappingservice":"googlemaps3","type":"ROAD...

  7. Generating and executing programs for a floating point single...

    Office of Scientific and Technical Information (OSTI)

    set architecture Citation Details In-Document Search Title: Generating and executing programs for a floating point single instruction multiple data instruction set architecture ...

  8. MHK Projects/Jackson Point Project | Open Energy Information

    Open Energy Info (EERE)

    Jackson Point Project < MHK Projects Jump to: navigation, search << Return to the MHK database homepage Loading map... "minzoom":false,"mappingservice":"googlemaps3","type":"ROADM...

  9. MHK Projects/Hope Field Point Project | Open Energy Information

    Open Energy Info (EERE)

    Hope Field Point Project < MHK Projects Jump to: navigation, search << Return to the MHK database homepage Loading map... "minzoom":false,"mappingservice":"googlemaps3","type":"RO...

  10. Optimizing minimum free-energy crossing points in solution: Linear...

    Office of Scientific and Technical Information (OSTI)

    Optimizing minimum free-energy crossing points in solution: Linear-response free energyspin-flip density functional theory approach Citation Details In-Document Search Title:...

  11. Numerical Analysis of Fixed Point Algorithms in the Presence...

    Office of Scientific and Technical Information (OSTI)

    in the Presence of Hardware Faults Citation Details In-Document Search Title: Numerical Analysis of Fixed Point Algorithms in the Presence of Hardware Faults You are ...

  12. Update Invalid Reservation Points for Transmission Service Requests...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Update-Invalid-Reservation-Points-for-Transmission-Service-Requests-on-BPA-Network----February-13,-2014 Sign In About | Careers | Contact | Investors | bpa.gov Search Doing...

  13. Microsoft PowerPoint - 2013 RER presentation SSAB (2)

    Office of Environmental Management (EM)

    completed. Sr-90 levels at 7500 Bridge (Integration Point) decreased - RA completed on 18 slabs and associated structures in Northwest Quadrant Legacy material removed from...

  14. ChargePoint is Helping Electrify America's Transportation | Department...

    Broader source: Energy.gov (indexed) [DOE]

    of plug-in electric vehicles (PEVs), the Energy Department supported the ChargePoint America project in 2009 under the American Recovery and Reinvestment Act. At the...

  15. MHK Technologies/Trondheim Point Absorber | Open Energy Information

    Open Energy Info (EERE)

    Point Absorber.jpg Technology Profile Primary Organization Norwegian University of Science and Technology CONWEC AS Technology Resource Click here Wave Technology Description...

  16. Scott Runnels of Computational Physics to teach at West Point

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Scott Runnels to teach at West Point Scott Runnels of Computational Physics to teach at West Point Runnels has been selected for a two-year faculty post in the Department of Physics and Nuclear Engineering at West Point. March 19, 2013 Scott Runnels Scott Runnels Contact Kevin Roark Communications Office (505) 665-9202 Email I'm sure this exchange will have tremendous benefits for both West Point and the Laboratory, and it continues a relationship with the Army that began more than 70 years ago

  17. An optimal point spread function subtraction algorithm for high...

    Office of Scientific and Technical Information (OSTI)

    An optimal point spread function subtraction algorithm for high-contrast imaging: a ... This image is built as a linear combination of all available images and is optimized ...

  18. NNSA Points of Contact | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Points of Contact | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear...

  19. Village of Rouses Point, New York (Utility Company) | Open Energy...

    Open Energy Info (EERE)

    @rousespoint Facebook: https:www.facebook.compagesRouses-Point184314958261895?vwall Outage Hotline: (518) 297-5502, ext. 314 References: EIA Form EIA-861 Final Data File...

  20. Gravity Duals of Lifshitz-Like Fixed Points (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    This work can be considered a small step towards making useful dual descriptions of such critical points. Authors: Kachru, Shamit ; Stanford U., Phys. Dept. SLAC ; Liu, Xiao ; ...

  1. MCNP Comparison With Point Source Measurements From a Portable...

    Office of Scientific and Technical Information (OSTI)

    Language: English Subject: 46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND TECHNOLOGY; POINT SOURCES; GAMMA SPECTROMETERS; HIGH-PURITY GE DETECTORS; MONTE CARLO METHOD; ...

  2. Barbers Point Housing, Hawaii: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    Barbers Point Housing, Hawaii: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 21.32455, -158.083156 Show Map Loading map......

  3. Iroquois Point, Hawaii: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Iroquois Point, Hawaii: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 21.3275, -157.9802778 Show Map Loading map... "minzoom":false,"mappings...

  4. Atmospheric Radiation Measurement (ARM) Data from Point Reyes...

    Office of Scientific and Technical Information (OSTI)

    Visit OSTI to utilize additional information resources in energy science and technology. Point Reyes National Seashore, on the California coast north of San Francisco, was the ...

  5. West Point Treatment Plant Biomass Facility | Open Energy Information

    Open Energy Info (EERE)

    West Point Treatment Plant Sector Biomass Facility Type Non-Fossil Waste Location King County, Washington Coordinates 47.5480339, -121.9836029 Show Map Loading map......

  6. Energy Department Authorizes Dominion's Proposed Cove Point Facility...

    Office of Environmental Management (EM)

    WASHINGTON - The Energy Department announced today that it has conditionally authorized Dominion Cove Point LNG, LP to export domestically produced liquefied natural gas (LNG) to ...

  7. Tribal Agency Points of Contact | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    agencies for Tribal Affairs. PDF icon Tribal Agency points of contact More Documents & Publications 2011 Tribal Summit Agenda DOETribalSummitAgenda.pdf 2011 Tribal Summit Book

  8. Lung motion estimation using dynamic point shifting: An innovative model based on a robust point matching algorithm

    SciTech Connect (OSTI)

    Yi, Jianbing; Yang, Xuan Li, Yan-Ran; Chen, Guoliang

    2015-10-15

    Purpose: Image-guided radiotherapy is an advanced 4D radiotherapy technique that has been developed in recent years. However, respiratory motion causes significant uncertainties in image-guided radiotherapy procedures. To address these issues, an innovative lung motion estimation model based on a robust point matching is proposed in this paper. Methods: An innovative robust point matching algorithm using dynamic point shifting is proposed to estimate patient-specific lung motion during free breathing from 4D computed tomography data. The correspondence of the landmark points is determined from the Euclidean distance between the landmark points and the similarity between the local images that are centered at points at the same time. To ensure that the points in the source image correspond to the points in the target image during other phases, the virtual target points are first created and shifted based on the similarity between the local image centered at the source point and the local image centered at the virtual target point. Second, the target points are shifted by the constrained inverse function mapping the target points to the virtual target points. The source point set and shifted target point set are used to estimate the transformation function between the source image and target image. Results: The performances of the authors’ method are evaluated on two publicly available DIR-lab and POPI-model lung datasets. For computing target registration errors on 750 landmark points in six phases of the DIR-lab dataset and 37 landmark points in ten phases of the POPI-model dataset, the mean and standard deviation by the authors’ method are 1.11 and 1.11 mm, but they are 2.33 and 2.32 mm without considering image intensity, and 1.17 and 1.19 mm with sliding conditions. For the two phases of maximum inhalation and maximum exhalation in the DIR-lab dataset with 300 landmark points of each case, the mean and standard deviation of target registration errors on the

  9. Bulk and mechanical properties of the Paintbrush tuff recovered from borehole USW NRG-7/7A: Data report. Yucca Mountain Site Characterization Project

    SciTech Connect (OSTI)

    Martin, R.J.; Boyd, P.J.; Noel, J.S.; Price, R.H.

    1995-05-01

    An integral part of the licensing procedure for the potential nuclear waste repository at Yucca Mountain, Nevada, involves prediction of the in situ rheology for the design and construction of the facility and the emplacement of canisters containing radioactive waste. The data used to model the thermal and mechanical behavior of the repository and surrounding lithologies include dry and saturated bulk densities, average grain density, porosity, compressional and shear wave velocities, elastic moduli, and compressional and tensional fracture strengths. In this study, a suite of experiments was performed on cores recovered from the USW NRG-717A borehole drilled in support of the Exploratory Studies Facility (ESF) at Yucca Mountain. USW NRG-7/7A was drilled to a depth of 1,513.4 feet through five thermal/mechanical units of Paintbrush tuff and terminating in the tuffaceous beds of the Calico IEUS. The thermal/mechanical stratigraphy was defined by Orfiz et al. to group rock horizons of similar properties for the purpose of simplifying modeling efforts. The relationship between the geologic stratigraphy and the thermal/mechanical stratigraphy is presented. The tuff samples in this study have a wide range of welding characteristics, and a smaller range of mineralogy and petrology characteristics. Generally, the samples are silicic, ash-fall tuffs that exhibit large variability in their elastic and strength properties.

  10. Bulk and mechanical properties of the Paintbrush tuff recovered from boreholes UE25 NRG-2, 2A, 2B, and 3: Data report

    SciTech Connect (OSTI)

    Boyd, P.J.; Martin, R.J.; Noel, J.S. [New England Research, Inc., White River Junction, VT (United States); Price, R.H. [Sandia National Labs., Albuquerque, NM (United States)

    1996-09-01

    An integral part of the licensing procedure for the potential nuclear waste repository at Yucca Mountain, Nevada, involves characterization of the in situ rheology for the design and construction of the facility and the emplacement of canisters containing radioactive waste. The data used to model the thermal and mechanical behavior of the repository and surrounding lithologies include dry and saturated bulk densities, average grain density, porosity, compressional and shear wave velocities, elastic moduli, and compressional and tensional fracture strengths. In this study, a suite of experiments was performed on cores recovered from boreholes UE25 NRG-2, 2A, 2B, and 3 drilled in support of the Exploratory Studies Facility (ESF) at Yucca Mountain. The holes penetrated the Timber Mountain tuff and two thermal/mechanical units of the Paintbrush tuff. The thermal/mechanical stratigraphy was defined by Ortiz to group rock horizons of similar properties for the purpose of simplifying modeling efforts. The relationship between the geologic stratigraphy and the thermal/mechanical stratigraphy for each borehole is presented. The tuff samples in this study have a wide range of welding characteristics (usually reflected in sample porosity), and a smaller range of mineralogy and petrology characteristics. Generally, the samples are silicic, ash-fall tuffs that exhibit large variability in their elastic and strength properties.

  11. Nonequilibrium Kondo impurity: Perturbation about an exactly solvable point

    SciTech Connect (OSTI)

    Majumdar, K.; Schiller, A.; Hershfield, S.

    1998-02-01

    We perturb about an exactly solvable point for the nonequilibrium Kondo problem. In each of the three independent directions in parameter space, the differential conductance evolves smoothly as one goes away from the solvable point, and the lowest-order correction contains the logarithm of the band width, or cutoff. Perturbing towards physically realistic exchange couplings yields differential-conductance curves which more closely resemble experimental data than at the solvable point. The leading coefficient which describes the low-temperature and low-voltage scaling changes as one perturbs away from the solvable point, indicating nonuniversal behavior; however, it is restored to the solvable-point value in the limit of an infinite band width. {copyright} {ital 1998} {ital The American Physical Society}

  12. On the nature of unstable equilibrium points in power systems

    SciTech Connect (OSTI)

    Berggren, B.; Andersson, G. . Dept. of Electric Power Systems)

    1993-05-01

    This paper concerns the application of direct methods for transient stability analysis of stressed power systems. One of the most important issues in this area is to find the controlling unstable equilibrium point for the disturbance under consideration. This paper provides a conceptual framework for discussing stable and unstable equilibrium points in power systems based on simple topological arguments. It is for instance shown that every conceivable case of system separation can be related to a specific unstable equilibrium point (u.e.p) in an unloaded system. This result can be seen as a verification of the soundness of the often used corrected corner point approximation and ray point approximation, since these two approximations would give the same unstable equilibrium points in an unloaded system. Moreover, it is shown, by an example, that some of these unstable equilibrium points can disappear when the loading of the system increases. The implications of the findings of this paper are discussed for the so-called MOD method of finding the controlling u.e.p., which is used in some software packages. Finally, a method based on a combination of MOD method and the BCU method is outlined and proposed as the subject of future investigation.

  13. Guide to PowerPoint Presentations | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Additional Resources What it takes to give a great PowerPoint Presentation, Reason I am Here blog A blog post with advice on how to build a compelling narrative for a presentation. VIDEO How to avoid death by PowerPoint, TEDxStockholm An 18-minute TEDx Talk on how to make PowerPoint slides more engaging for viewers. Designing Effective Scientific Presentations, Dr. Susan McConnell A 42-minute talk delivered by Stanford scientist Susan McConnell. The video discusses how researchers in the

  14. Microsoft PowerPoint - AGA webinar July 2013 Final .pptx

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... higher at point of sale Additional cost can be rolled into the loan with little impact on the mortgage payment Common for general home improvements to be made during first year ...

  15. EIS-0349: Cherry Point Co-generation Project

    Broader source: Energy.gov [DOE]

    This EIS analyzes DOE's decision to support BP West Coast Products, LLC proposal to construct and operate a 720-megawatt, natural-gas-fired, combined-cycle cogeneration facility on land adjacent to its BP Cherry Point Refinery.

  16. Central Point, Oregon: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    article is a stub. You can help OpenEI by expanding it. Central Point is a city in Jackson County, Oregon. It falls under Oregon's 2nd congressional district.12 References...

  17. Eagle Point, Oregon: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    This article is a stub. You can help OpenEI by expanding it. Eagle Point is a city in Jackson County, Oregon. It falls under Oregon's 2nd congressional district.12 References...

  18. City of High Point Electric- Residential Energy Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    The City of High Point offers the Hometown Green Program to help customers reduce energy use. Under this program, rebates are available for newly constructed energy efficient homes, heat pumps, and...

  19. Blue Point, New York: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Blue Point is a census-designated place in Suffolk County, New York.1 References US...

  20. Fast Change Point Detection for Electricity Market Analysis

    SciTech Connect (OSTI)

    UC Berkeley; Gu, William; Choi, Jaesik; Gu, Ming; Simon, Horst; Wu, Kesheng

    2013-08-25

    Electricity is a vital part of our daily life; therefore it is important to avoid irregularities such as the California Electricity Crisis of 2000 and 2001. In this work, we seek to predict anomalies using advanced machine learning algorithms. These algorithms are effective, but computationally expensive, especially if we plan to apply them on hourly electricity market data covering a number of years. To address this challenge, we significantly accelerate the computation of the Gaussian Process (GP) for time series data. In the context of a Change Point Detection (CPD) algorithm, we reduce its computational complexity from O($n^{5}$) to O($n^{2}$). Our efficient algorithm makes it possible to compute the Change Points using the hourly price data from the California Electricity Crisis. By comparing the detected Change Points with known events, we show that the Change Point Detection algorithm is indeed effective in detecting signals preceding major events.

  1. Seven Points, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. Seven Points is a city in Henderson County and Kaufman County, Texas. It falls under Texas's 5th congressional district.12 References...

  2. FINDING OF NO SIGNIFICANT IMPACT FOR COVE POINT LIQUEFACTION...

    Broader source: Energy.gov (indexed) [DOE]

    LP, APPLICATION SEEKING DEPARTMENT OF ENERGY AUTHORIZATION TO EXPORT LIQUEFIED NATURAL GAS FROM DOMINION COVE POINT LNG TERMINAL TO NON-FREE TRADE AGREEMENT NATIONS AGENCY: U.S....

  3. Shot noise in systems with semi-Dirac points

    SciTech Connect (OSTI)

    Zhai, Feng; Wang, Juan

    2014-08-14

    We calculate the ballistic conductance and shot noise of electrons through a two-dimensional stripe system (width W ? length L) with semi-Dirac band-touching points. We find that the ratio between zero-temperature noise power and mean current (the Fano factor) is highly anisotropic. When the transport is along the linear-dispersion direction and the Fermi energy is fixed at the semi-Dirac point, the Fano factor has a universal value F?=?0.179 while a minimum conductivity exists and scales with L{sup 1?2}. Along the parabolic dispersion direction, the Fano factor at the semi-Dirac point has a contact-independent limit exceeding 0.9, which varies weakly with L due to the common-path interference of evanescent waves. Our findings suggest a way to discern the type of band-touching points.

  4. West Point, Kentucky: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. West Point is a city in Hardin County, Kentucky. It falls under Kentucky's 2nd congressional...

  5. West Point, Nebraska: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. West Point is a city in Cuming County, Nebraska. It falls under Nebraska's 1st congressional...

  6. ASER Web Addresses and Points of Contact at DOE Sites

    Broader source: Energy.gov (indexed) [DOE]

    ASER Web Addresses and Points of Contact at DOE Sites March 29, 2013 Site and Web Address ASER Contact Name Phone E-mail Ames Laboratory http:www.ameslab.govoperationsesha...

  7. Experimental observation of saddle points over the quantum control...

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Search Results Journal Article: Experimental observation of saddle points over the quantum control landscape of a two-spin system Citation Details In-Document ...

  8. Continuous Learning Points: Earn CLPs! | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    2014 CLP Form - Attendees at the PM Workshop can earn Continuing Learning Points (CLPs) for both days in addition to earning CLPs for the optional half-day training sessions on...

  9. Center for Inverse Design: Lost SharePoint Password?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lost SharePoint Password? Enter your name and e-mail address in the boxes provided. When you are finished, click "Request Password." If you enter your e-mail address incorrectly, ...

  10. Microsoft PowerPoint - nsa_shippingforminstructions.ppt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    existing record (change data or add receive information) requires a login with username and password. At this point in time, we will be limiting this to NSA operations personnel. ...

  11. Morgan's Point, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    article is a stub. You can help OpenEI by expanding it. Morgan's Point is a city in Harris County, Texas. It falls under Texas's 2nd congressional district.12 References ...

  12. Piney Point Village, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    is a stub. You can help OpenEI by expanding it. Piney Point Village is a city in Harris County, Texas. It falls under Texas's 7th congressional district.12 References ...

  13. Microsoft PowerPoint - 04 Melendez Rimando Restructuring of EM...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    March 2010 rev 2 rcvd 8 Mar 1100 Compatibi Microsoft PowerPoint - 04 Melendez Rimando Restructuring of EM Portfolio Briefing 3 March 2010 rev 2 rcvd 8 Mar 1100 Compatibi PDF icon ...

  14. Quantifying the Impact of Single Bit Flips on Floating Point...

    Office of Scientific and Technical Information (OSTI)

    floating-point representation in an architecture-agnostic manner, i.e., without requiring proprietary information such as bit flip rates and the vendor-specific circuit designs. ...

  15. CenterPoint Energy- SCORE and CitySmart Program

    Broader source: Energy.gov [DOE]

    CenterPoint Energy offers the SCORE and CitySmart Programs to help customers address energy costs through energy efficiency. The SCORE and CitySmart Programs provide complimentary tools, services...

  16. Yarrow Point, Washington: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    This article is a stub. You can help OpenEI by expanding it. Yarrow Point is a town in King County, Washington. It falls under Washington's 8th congressional district.12...

  17. Hunts Point, Washington: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    This article is a stub. You can help OpenEI by expanding it. Hunts Point is a town in King County, Washington. It falls under Washington's 8th congressional district.12...

  18. West Point, Virginia: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    This article is a stub. You can help OpenEI by expanding it. West Point is a town in King William County, Virginia. It falls under Virginia's 1st congressional district.12...

  19. Energy Department Authorizes Dominion Cove Point LNG to Export...

    Broader source: Energy.gov (indexed) [DOE]

    Dominion Cove Point LNG, LP to export domestically produced liquefied natural gas (LNG) to countries that do not have a Free Trade Agreement (FTA) with the United States. The Cove ...

  20. LM Meets with Native Village of Point Hope, Alaska

    Broader source: Energy.gov [DOE]

    U.S. Department of Energy (DOE) Office of Legacy Management (LM) federal and contractor staff traveled to Point Hope, Alaska, on March 3, 2014, to consult with officials from the Native Village of...

  1. 2011 Radioactive Materials Usage Survey for Unmonitored Point Sources

    SciTech Connect (OSTI)

    Sturgeon, Richard W.

    2012-06-27

    This report provides the results of the 2011 Radioactive Materials Usage Survey for Unmonitored Point Sources (RMUS), which was updated by the Environmental Protection (ENV) Division's Environmental Stewardship (ES) at Los Alamos National Laboratory (LANL). ES classifies LANL emission sources into one of four Tiers, based on the potential effective dose equivalent (PEDE) calculated for each point source. Detailed descriptions of these tiers are provided in Section 3. The usage survey is conducted annually; in odd-numbered years the survey addresses all monitored and unmonitored point sources and in even-numbered years it addresses all Tier III and various selected other sources. This graded approach was designed to ensure that the appropriate emphasis is placed on point sources that have higher potential emissions to the environment. For calendar year (CY) 2011, ES has divided the usage survey into two distinct reports, one covering the monitored point sources (to be completed later this year) and this report covering all unmonitored point sources. This usage survey includes the following release points: (1) all unmonitored sources identified in the 2010 usage survey, (2) any new release points identified through the new project review (NPR) process, and (3) other release points as designated by the Rad-NESHAP Team Leader. Data for all unmonitored point sources at LANL is stored in the survey files at ES. LANL uses this survey data to help demonstrate compliance with Clean Air Act radioactive air emissions regulations (40 CFR 61, Subpart H). The remainder of this introduction provides a brief description of the information contained in each section. Section 2 of this report describes the methods that were employed for gathering usage survey data and for calculating usage, emissions, and dose for these point sources. It also references the appropriate ES procedures for further information. Section 3 describes the RMUS and explains how the survey results are

  2. Point kinetics calculations with fully coupled thermal fluids reactivity feedback

    SciTech Connect (OSTI)

    Zhang, H.; Zou, L.; Andrs, D.; Zhao, H.; Martineau, R.

    2013-07-01

    The point kinetics model has been widely used in the analysis of the transient behavior of a nuclear reactor. In the traditional nuclear reactor system safety analysis codes such as RELAP5, the reactivity feedback effects are calculated in a loosely coupled fashion through operator splitting approach. This paper discusses the point kinetics calculations with the fully coupled thermal fluids and fuel temperature feedback implemented into the RELAP-7 code currently being developed with the MOOSE framework. (authors)

  3. Radar antenna pointing for optimized signal to noise ratio.

    SciTech Connect (OSTI)

    Doerry, Armin Walter; Marquette, Brandeis

    2013-01-01

    The Signal-to-Noise Ratio (SNR) of a radar echo signal will vary across a range swath, due to spherical wavefront spreading, atmospheric attenuation, and antenna beam illumination. The antenna beam illumination will depend on antenna pointing. Calculations of geometry are complicated by the curved earth, and atmospheric refraction. This report investigates optimizing antenna pointing to maximize the minimum SNR across the range swath.

  4. Correlations estimate volume distilled using gravity, boiling point

    SciTech Connect (OSTI)

    Moreno, A.; Consuelo Perez de Alba, M. del; Manriquez, L.; Guardia Mendoz, P. de la

    1995-10-23

    Mathematical nd graphic correlations have been developed for estimating cumulative volume distilled as a function of crude API gravity and true boiling point (TBP). The correlations can be used for crudes with gravities of 21--34{degree} API and boiling points of 150--540 C. In distillation predictions for several mexican and Iraqi crude oils, the correlations have exhibited accuracy comparable to that of laboratory measurements. The paper discusses the need for such a correlation and the testing of the correlation.

  5. Method of making a non-lead hollow point bullet

    DOE Patents [OSTI]

    Vaughn, Norman L.; Lowden, Richard A.

    2003-10-07

    The method of making a non-lead hollow point bullet has the steps of a) compressing an unsintered powdered metal composite core into a jacket, b) punching a hollow cavity tip portion into the core, c) seating an insert, the insert having a hollow point tip and a tail protrusion, on top of the core such that the tail protrusion couples with the hollow cavity tip portion, and d) swaging the open tip of the jacket.

  6. Small Business Points of Contact | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Small Business Points of Contact Small Business Points of Contact Department of Energy Facilities The Department of Energy (DOE) buyers of goods and services are located in DOE headquarters (Washington, DC and Germantown, Maryland) offices, field contracting offices, national laboratories and government owned facilities throughout the United States. The below directories are provided to connect you with small business program managers and/or acquisition personnel located in DOE headquarters

  7. Congressional Affairs Points of Contact | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Points of Contact Congressional Affairs Points of Contact Our office is available to assist congressional offices and committees regarding Department of Energy programs and activities. Based on your particular area of interest please contact the congressional affairs team at 202-586-5450. Martha Oliver, Legislative Affairs Specialist Areas of Focus: Renewable energy programs including biomass, solar, wind, water and geothermal. Energy efficiency for manufacturing, homes, buildings, and

  8. Cove Point: A step back into the LNG business

    SciTech Connect (OSTI)

    Katz, M.G.

    1995-12-31

    In 1978, ships began unloading LNG from Algeria at Cove Point`s berthing facilities 1.25 miles offshore. An underwater pipeline transported the LNG to land, where it was stored in the terminal`s four 140-foot-high cryogenic storage tanks. When the LNG was needed, the terminals 10 vaporizers converted it back to gas for send out via an 87-mile-long, 36-inch-diameter pipeline linking the terminal with interstate pipelines of CNG Transmission Corp. and Columbia Gas Transmission Corp. in Loudon County, Va. But Cove Point handled only about 80 shiploads of LNG before shutting down in December 1980, after a dispute about gas prices between US customers and Algeria. The plant sat dormant until the natural gas industry`s deregulation under Order 636. Deregulation resulted in major pipelines abandoning their sales service, and gas distributors and large customers found it was now their obligation to ensure that they had adequate gas supplies during winter peak-demand periods. Enter Cove Point`s peaking capabilities. They had to add the liquefaction unit and recommission other parts of the plant, but the timing was right. Cove Point`s new liquefaction unit is liquefying about 15 million cubic feet (MMcf) of LNG per day of domestic gas. It chills the gas to {minus}260 degrees Fahrenheit to turn it into a liquid for injection and storage in one of the facility`s double-walled insulated tanks. During its initial injection season, which ends Dec. 15, Cove Point is expected to produce enough LNG to almost fill one tank, which can store up to 1.25 billion cubic feet (Bcf). Were the gas not intended for peak-shaving purposes, it would be enough to supply 14,000 homes for a year. As it is, most of the gas will be returned as pipeline gas, during next January and February`s expected cold snaps, to the utilities and users who supplied it. Cove Point`s initial daily sendout capacity is about 400 MMcf.

  9. Littoral processes: US Coast Guard Station, Fort Point, San Francisco

    SciTech Connect (OSTI)

    Ecker, R.M.; Whelan, G.

    1983-10-01

    The US Coast Guard Station, Fort Point is located three-quarters of a nautical mile southeast of the Golden Gate Strait, the entrance to San Francisco Bay. The existing storm wave conditions at Fort Point Station pier make it extremely dangerous for the SAR crews to get on and off the Motor Life Boats at times requiring the vessels to be moored at the San Francisco Yacht Harbor about 1.5 miles east of the Fort Point Station. To mitigate these harsh working conditions the US Coast Guard is considering the feasibility of constructing suitable all-weather moorings for the three Motor Life Boats at the Fort Point Station to enable unimpeded SAR operations, to provide safe working conditions for Coast Guard small boat crews, and to improve small boat maintenance conditions at Fort Point Station. The purpose of this report is to identify, analyze and evaluate physical environmental factors that could affect all-weather moorings siting, configuration and entrance location, as well as potential post construction alterations to littoral conditions and processes. This report includes a description of the site, description of pertinent littoral processes, evaluation of how these processes could affect construction of all-weather moorings, and discussion of design considerations, as well as mitigation measures to minimize potential adverse effects to the physical environment. 19 references, 27 figures, 26 tables.

  10. EERE PowerPoint 97-2004 Template: Green Version | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EERE PowerPoint 97-2004 Template: Green Version EERE PowerPoint 97-2004 Template: Green Version Green version of the EERE PowerPoint template, for use with PowerPoint 97 through ...

  11. Engineering to Control Noise, Loading, and Optimal Operating Points

    SciTech Connect (OSTI)

    Mitchell R. Swartz

    2000-11-12

    Successful engineering of low-energy nuclear systems requires control of noise, loading, and optimum operating point (OOP) manifolds. The latter result from the biphasic system response of low-energy nuclear reaction (LENR)/cold fusion systems, and their ash production rate, to input electrical power. Knowledge of the optimal operating point manifold can improve the reproducibility and efficacy of these systems in several ways. Improved control of noise, loading, and peak production rates is available through the study, and use, of OOP manifolds. Engineering of systems toward the OOP-manifold drive-point peak may, with inclusion of geometric factors, permit more accurate uniform determinations of the calibrated activity of these materials/systems.

  12. Point defect weakened thermal contraction in monolayer graphene

    SciTech Connect (OSTI)

    Zha, Xian-Hu; Zhang, Rui-Qin; Lin, Zijing

    2014-08-14

    We investigate the thermal expansion behaviors of monolayer graphene and three configurations of graphene with point defects, namely the replacement of one carbon atom with a boron or nitrogen atom, or of two neighboring carbon atoms by boron-nitrogen atoms, based on calculations using first-principles density functional theory. It is found that the thermal contraction of monolayer graphene is significantly decreased by point defects. Moreover, the corresponding temperature for negative linear thermal expansion coefficient with the maximum absolute value is reduced. The cause is determined to be point defects that enhance the mechanical strength of graphene and then reduce the amplitude and phonon frequency of the out-of-plane acoustic vibration mode. Such defect weakening of graphene thermal contraction will be useful in nanotechnology to diminish the mismatching or strain between the graphene and its substrate.

  13. HC Policy and Services - Points of Contact | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    HC Policy and Services - Points of Contact HC Policy and Services - Points of Contact Learning and Development Contact Email Phone Executive Learning Rosenmarkle, David P david.rosenmarkle@hq.doe.gov 202-586-7978 Technical and Professional Skills Dent, Cheri D cheri.dent@hq.doe.gov 202-586-9556 Supervisory Training Robinson, June V june.robinson@hq.doe.gov 202-586-9557 Competency Development Coleman, Eric eric.coleman@hq.doe.gov 202-586-8466 Organizational Development Coleman, Eric

  14. An Updated Point Design for Heavy Ion Fusion

    SciTech Connect (OSTI)

    Yu, S S; Meier, W R; Abbott, R B; Barnard, J J; Brown, t; Callahan, D A; Heitzenroeder, P; Latkowski, J F; Logan, B G; Pemberton, S J; Peterson, P F; Rose, D V; Sabbi, G -L; Sharp, W M; Welch, D R

    2002-12-16

    An updated, self-consistent point design for a heavy ion fusion (HIF) power plant based on an induction linac driver, indirect-drive targets, and a thick liquid wall chamber has been completed. Conservative parameters were selected to allow each design area to meet its functional requirements in a robust manner, and thus this design is referred to as the Robust Point Design (RPD-2002). This paper provides a top-level summary of the major characteristics and design parameters for the target, driver, final focus magnet layout and shielding, chamber, beam propagation to the target, and overall power plant.

  15. An Updated Point Design for Heavy Ion Fusion

    SciTech Connect (OSTI)

    Meier, W R; Yu, S S; Abbott, R P; Barnard, J J; Brown, T; Callahan, D A; Heitzenroeder, P; Latkowski, J F; Logan B G; Pemberton, S J; Peterson, P F; Rose, D V; Sabbi, G-L; Sharp, W M; Welch, D R

    2002-11-12

    An updated, self-consistent point design for a heavy ion fusion (HIF) power plant based on an induction linac driver, indirect-drive targets, and a thick liquid wall chamber has been completed. Conservative parameters were selected to allow each design area to meet its functional requirements in a robust manner, and thus this design is referred to as the Robust Point Design (RPD-2002). This paper provides a top-level summary of the major characteristics and design parameters for the target, driver, final focus magnet layout and shielding, chamber, beam propagation to the target, and overall power plant.

  16. An updated point design for heavy ion fusion

    SciTech Connect (OSTI)

    Yu, S.S.; Meier, W.R.; Abbott, R.P.; Barnard, J.J.; Brown, T.; Callahan, D.A.; Heitzenroeder, P.; Latkowski, J.F.; Logan, B.G.; Pemberton, S.J.; Peterson, P.F.; Rose, D.V.; Sabbi, G-L.; Sharp, W.M.; Welch, D.R.

    2002-11-01

    An updated, self-consistent point design for a heavy ion fusion (HIF) power plant based on an induction linac driver, indirect-drive targets, and a thick liquid wall chamber has been completed. Conservative parameters were selected to allow each design area to meet its functional requirements in a robust manner, and thus this design is referred to as the Robust Point Design (RPD-2002). This paper provides a top-level summary of the major characteristics and design parameters for the target, driver, final focus magnet layout and shielding, chamber, beam propagation to the target, and overall power plant.

  17. Measurement of thermodynamic temperature of high temperature fixed points

    SciTech Connect (OSTI)

    Gavrilov, V. R.; Khlevnoy, B. B.; Otryaskin, D. A.; Grigorieva, I. A.; Samoylov, M. L.; Sapritsky, V. I.

    2013-09-11

    The paper is devoted to VNIIOFI's measurements of thermodynamic temperature of the high temperature fixed points Co-C, Pt-C and Re-C within the scope of the international project coordinated by the Consultative Committee for Thermometry working group 5 'Radiation Thermometry'. The melting temperatures of the fixed points were measured by a radiance mode radiation thermometer calibrated against a filter radiometer with known irradiance spectral responsivity via a high temperature black body. This paper describes the facility used for the measurements, the results and estimated uncertainties.

  18. Unusual behavior of superconductors near the tricritical Lifshitz point

    SciTech Connect (OSTI)

    Buzdin, A.I.; Kulic, M.L.

    1984-02-01

    The properties of superconductors near the tricritical Lifshitz (TL) point are studied. Unusual behavior of H/sub c//sub 2/(T) near the TL point in three-dimensional (3D) systems is found, as well as an oscillatory character of H/sub c//sub 2/(T) in quasi-2D systems. The oscillatory character of the critical current J/sub c/ of the S-S'-S junction as a function of thickness and temperature is also studied. Predictions are compared to experimental data in such quasi-2D systems as T/sub a/S/sub 2/(pyridine).

  19. Development of Integrated Microanalysis of Nanomaterials (06-ERI-001)

    SciTech Connect (OSTI)

    Bradley, J P

    2009-10-07

    Comets--small extraterrestrial bodies of ice, dust, and small rocky particles--are considered the oldest, most primitive bodies in the solar system. They were thought to be composed of preserved interstellar particles from 4.6 billion years ago, when the Sun and the planets began to form from a primordial disk of dust and gas. The nonvolatile mineral components of comets are probably natural nanomaterials that include preserved interstellar dust as well as the first solids condensed in the solar system. Thus, comet samples may be considered as forensic 'time capsules' from the presolar molecular cloud and the earliest stages of solar system formation. Cometary material was captured in 2004, when the National Aeronautics and Space Administration's Stardust spacecraft flew through the coma of comet Wild as it neared the orbit of Mars. As Stardust approached the 4.5-kilometer-diameter comet, the spacecraft briefly extended a collector filled with lightweight aerogel glass foam to capture thousands of tiny particles. On January 15, 2006, the spacecraft ejected its sample return capsule onto the Utah desert southwest of Salt Lake City. Researchers at LLNL supported by this LDRD were part of a collaborative team investigating the mineralogical, chemical, and isotopic compositions of natural cometary nanomaterials from the Stardust mission using the unique array of analytical facilities at Livermore. The studies have provided provide new insight into cosmically primitive materials that will enable a better understanding of the earliest stages of disk accretion around stars. The skills and analysis techniques developed for the characterization of these natural nanomaterials are synergistic with several Livermore programmatic needs in the emerging fields of nanomaterials, nanotechnology and forensics. The Stardust samples are also ideal training materials for a new generation of young scientists using state-of-the-art analytical instruments at the Laboratory.

  20. PP-412 ITC Lake Erie Project FRN_0.pdf

    Office of Environmental Management (EM)

  1. Daemen Alternative Energy/Geothermal Technologies Demonstration Program Erie County

    Broader source: Energy.gov [DOE]

    Project objectives: Replacement of the inefficient Marian Library Heating System with a state of the art, open loop, geo-exchange system in conjunction withthe Daemen College sustainable campus objectives. Coursework to be developed to engage students in the evaluation and future modifications of our campus buildings.

  2. ENERGY RESOURCES INTERNATIONAL, INC. ERI-2142.16-1301

    Broader source: Energy.gov (indexed) [DOE]

    This report was prepared for the Office of Uranium Management and Policy in the Office of ... Market Prices 8 2.4.1 Enrichment Market Price Activity 8 2.4.2 Future Market Price for ...

  3. Biogenic Aerosol - Effect on Clouds and Climate (BAECC-ERI)....

    Office of Scientific and Technical Information (OSTI)

    Modified meteorological radiosondes have been extensively developed at the University of Reading for measuring cloud properties, to allow measurements beyond the traditional ...

  4. Erie County, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Pennsylvania Lake City, Pennsylvania Lawrence Park, Pennsylvania McKean, Pennsylvania Mill Village, Pennsylvania North East, Pennsylvania Northwest Harborcreek, Pennsylvania...

  5. Daemen Alternative Energy/Geothermal Technologies Demonstration Program Erie County

    SciTech Connect (OSTI)

    Robert C. Beiswanger, Jr.

    2010-05-20

    The purpose of the Daemen Alternative Energy/Geothermal Technologies Demonstration Project is to demonstrate the use of geothermal technology as model for energy and environmental efficiency in heating and cooling older, highly inefficient buildings. The former Marian Library building at Daemen College is a 19,000 square foot building located in the center of campus. Through this project, the building was equipped with geothermal technology and results were disseminated. Gold LEED certification for the building was awarded. 1) How the research adds to the understanding of the area investigated. This project is primarily a demonstration project. Information about the installation is available to other companies, organizations, and higher education institutions that may be interested in using geothermal energy for heating and cooling older buildings. 2) The technical effectiveness and economic feasibility of the methods or techniques investigated or demonstrated. According to the modeling and estimates through Stantec, the energy-efficiency cost savings is estimated at 20%, or $24,000 per year. Over 20 years this represents $480,000 in unrestricted revenue available for College operations. See attached technical assistance report. 3) How the project is otherwise of benefit to the public. The Daemen College Geothermal Technologies Ground Source Heat Pumps project sets a standard for retrofitting older, highly inefficient, energy wasting and environmentally irresponsible buildings?¢????quite typical of many of the buildings on the campuses of regional colleges and universities. As a model, the project serves as an energy-efficient system with significant environmental advantages. Information about the energy-efficiency measures is available to other colleges and universities, organizations and companies, students, and other interested parties. The installation and renovation provided employment for 120 individuals during the award period. Through the new Center, Daemen will continue to host a range of events on campus for the general public. The College does not charge fees for speakers or most other events. This has been a long-standing tradition of the College.

  6. Progress and prospects for an FI relevant point design

    SciTech Connect (OSTI)

    Key, M; Amendt, P; Bellei, C; Clark, D; Cohen, B; Divol, L; Ho, D; Kemp, A; Larson, D; Marinak, M; Patel, P; Shay, H; Strozzi, D; Tabak, M

    2011-11-02

    The physics issues involved in scaling from sub ignition to high gain fast ignition are discussed. Successful point designs must collimate the electrons and minimize the stand off distance to avoid multi mega-joule ignition energies. Collimating B field configurations are identified and some initial designs are explored.

  7. Material for Point Design (final summary of DIME material)

    SciTech Connect (OSTI)

    Bradley, Paul A.

    2014-02-25

    These slides summarize the motivation of the Defect Induced Mix Experiment (DIME) project, the point design of the Polar Direct Drive (PDD) version of the NIF separated reactant capsule, the experimental requirements, technical achievements, and some useful backup material. These slides are intended to provide much basic material in one convenient location and will hopefully be of some use for subsequent experimental projects.

  8. The effects of confining pressure on the strength and elastic properties of the Paintbrush tuff recovered from boreholes USW NRG-6 and USW NRG-7/7A: Data report

    SciTech Connect (OSTI)

    Martin, R.J.; Noel, J.S.; Boyd, P.J.

    1997-09-01

    Experimental results are presented for bulk and mechanical properties measurements on specimens of the Paintbrush tuff recovered from the USW NRG-6 and USW NRG-7/7A borehole at Yucca Mountain, Nevada. Measurements have been performed on five thermal/mechanical units: TCw, PTn, TSw2, and TSw3. The following bulk properties are reported for each specimen: dry bulk density, saturated bulk density, average grain density and porosity. Confined compression to failure tests were performed on selected specimens recovered from the boreholes at confining pressures of 5 and 10 MPa. In addition, compressional and shear wave velocities were measured on the specimens prior to testing. Measurements were conducted under drained conditions at room temperature on nominally water saturated specimens. The nominal strain rate for the experiments was 10{sup -5} s{sup -1}.

  9. Wide-angle point-to-point x-ray imaging with almost arbitrarily large angles of incidence

    SciTech Connect (OSTI)

    Bitter, M.; Hill, K. W.; Scott, S.; Feder, R.; Ko, Jinseok; Ince-Cushman, A.; Rice, J. E.

    2008-10-15

    The paper describes a new scheme for wide-angle point-to-point x-ray imaging with almost arbitrarily large angles of incidence by a matched pair of spherically bent crystals to eliminate the astigmatism, which is a well-known imaging error of spherical mirrors. In addition to x rays, the scheme should be applicable to a very broad spectrum of the electromagnetic radiation, including microwaves, infrared and visible light, as well as UV and extreme UV radiation, if the crystals are replaced with appropriate spherical reflectors. The scheme may also be applicable to the imaging with ultrasound.

  10. Relevance of complex branch points for partial wave analysis

    SciTech Connect (OSTI)

    Ceci, S.; Svarc, A.; Doering, M.; Hanhart, C.; Krewald, S.; Meissner, U.-G.

    2011-07-15

    A central issue in hadron spectroscopy is to deduce--and interpret--resonance parameters, namely, pole positions and residues, from experimental data, for those are the quantities to be compared to lattice QCD or model calculations. However, not every structure in the observables derives from a resonance pole: the origin might as well be branch points, either located on the real axis (when a new channel composed of stable particles opens) or in the complex plane (when at least one of the intermediate particles is unstable). In this paper we demonstrate first the existence of such branch points in the complex plane and then show on the example of the {pi}N P{sub 11} partial wave that it is not possible to distinguish the structures induced by the latter from a true pole signal based on elastic data alone.

  11. Arctic sea ice modeling with the material-point method.

    SciTech Connect (OSTI)

    Peterson, Kara J.; Bochev, Pavel Blagoveston

    2010-04-01

    Arctic sea ice plays an important role in global climate by reflecting solar radiation and insulating the ocean from the atmosphere. Due to feedback effects, the Arctic sea ice cover is changing rapidly. To accurately model this change, high-resolution calculations must incorporate: (1) annual cycle of growth and melt due to radiative forcing; (2) mechanical deformation due to surface winds, ocean currents and Coriolis forces; and (3) localized effects of leads and ridges. We have demonstrated a new mathematical algorithm for solving the sea ice governing equations using the material-point method with an elastic-decohesive constitutive model. An initial comparison with the LANL CICE code indicates that the ice edge is sharper using Materials-Point Method (MPM), but that many of the overall features are similar.

  12. Process for structural geologic analysis of topography and point data

    DOE Patents [OSTI]

    Eliason, Jay R.; Eliason, Valerie L. C.

    1987-01-01

    A quantitative method of geologic structural analysis of digital terrain data is described for implementation on a computer. Assuming selected valley segments are controlled by the underlying geologic structure, topographic lows in the terrain data, defining valley bottoms, are detected, filtered and accumulated into a series line segments defining contiguous valleys. The line segments are then vectorized to produce vector segments, defining valley segments, which may be indicative of the underlying geologic structure. Coplanar analysis is performed on vector segment pairs to determine which vectors produce planes which represent underlying geologic structure. Point data such as fracture phenomena which can be related to fracture planes in 3-dimensional space can be analyzed to define common plane orientation and locations. The vectors, points, and planes are displayed in various formats for interpretation.

  13. Optimum design point for a closed-cycle OTEC system

    SciTech Connect (OSTI)

    Ikegami, Yasuyuki; Uehara, Haruo

    1994-12-31

    Performance analysis is performed for optimum design point of a closed-cycle Ocean Thermal Energy Conversion (OTEC) system. Calculations are made for an OTEC model plant with a gross power of 100 MW, which was designed by the optimization method proposed by Uehara and Ikegami for the design conditions of 21 C--29 C warm sea water temperature and 4 C cold sea water temperature. Ammonia is used as working fluid. Plate type evaporator and condenser are used as heat exchangers. The length of the cold sea water pipe is 1,000 m. This model plant is a floating-type OTEC plant. The objective function of optimum design point is defined as the total heat transfer area of heat exchangers per the annual net power.

  14. Fixed points, stable manifolds, weather regimes, and their predictability

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Deremble, Bruno; D'Andrea, Fabio; Ghil, Michael

    2009-10-27

    In a simple, one-layer atmospheric model, we study the links between low-frequency variability and the model’s fixed points in phase space. The model dynamics is characterized by the coexistence of multiple ''weather regimes.'' To investigate the transitions from one regime to another, we focus on the identification of stable manifolds associated with fixed points. We show that these manifolds act as separatrices between regimes. We track each manifold by making use of two local predictability measures arising from the meteorological applications of nonlinear dynamics, namely, ''bred vectors'' and singular vectors. These results are then verified in the framework of ensemblemore » forecasts issued from clouds (ensembles) of initial states. The divergence of the trajectories allows us to establish the connections between zones of low predictability, the geometry of the stable manifolds, and transitions between regimes.« less

  15. Representing ductile damage with the dual domain material point method

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Long, C. C.; Zhang, D. Z.; Bronkhorst, C. A.; Gray, III, G. T.

    2015-12-14

    In this study, we incorporate a ductile damage material model into a computational framework based on the Dual Domain Material Point (DDMP) method. As an example, simulations of a flyer plate experiment involving ductile void growth and material failure are performed. The results are compared with experiments performed on high purity tantalum. We also compare the numerical results obtained from the DDMP method with those obtained from the traditional Material Point Method (MPM). Effects of an overstress model, artificial viscosity, and physical viscosity are investigated. Our results show that a physical bulk viscosity and overstress model are important in thismore » impact and failure problem, while physical shear viscosity and artificial shock viscosity have negligible effects. A simple numerical procedure with guaranteed convergence is introduced to solve for the equilibrium plastic state from the ductile damage model.« less

  16. Representing ductile damage with the dual domain material point method

    SciTech Connect (OSTI)

    Long, C. C.; Zhang, D. Z.; Bronkhorst, C. A.; Gray, III, G. T.

    2015-12-14

    In this study, we incorporate a ductile damage material model into a computational framework based on the Dual Domain Material Point (DDMP) method. As an example, simulations of a flyer plate experiment involving ductile void growth and material failure are performed. The results are compared with experiments performed on high purity tantalum. We also compare the numerical results obtained from the DDMP method with those obtained from the traditional Material Point Method (MPM). Effects of an overstress model, artificial viscosity, and physical viscosity are investigated. Our results show that a physical bulk viscosity and overstress model are important in this impact and failure problem, while physical shear viscosity and artificial shock viscosity have negligible effects. A simple numerical procedure with guaranteed convergence is introduced to solve for the equilibrium plastic state from the ductile damage model.

  17. Method of and apparatus for determining deposition-point temperature

    DOE Patents [OSTI]

    Mansure, A.J.; Spates, J.J.; Martin, S.J.

    1998-10-27

    Acoustic-wave sensor apparatus and method are disclosed for analyzing a normally liquid petroleum-based composition for monitoring deposition-point temperature. The apparatus includes at least one acoustic-wave device such as SAW, QCM, FPM, TSM or APM type devices in contact with the petroleum-based composition for sensing or detecting the surface temperature at which deposition occurs and/or rate of deposition as a function of temperature by sensing an accompanying change in frequency, phase shift, damping voltage or damping current of an electrical oscillator to a known calibrated condition. The acoustic wave device is actively cooled to monitor the deposition of constituents such as paraffins by determining the point at which solids from the liquid composition begin to form on the acoustic wave device. The acoustic wave device can be heated to melt or boil off the deposits to reset the monitor and the process can be repeated. 5 figs.

  18. Method of and apparatus for determining deposition-point temperature

    DOE Patents [OSTI]

    Mansure, Arthur J.; Spates, James J.; Martin, Stephen J.

    1998-01-01

    Acoustic-wave sensor apparatus and method for analyzing a normally liquid petroleum-based composition for monitoring deposition-point temperature. The apparatus includes at least one acoustic-wave device such as SAW, QCM, FPM, TSM or APM type devices in contact with the petroleum-based composition for sensing or detecting the surface temperature at which deposition occurs and/or rate of deposition as a function of temperature by sensing an accompanying change in frequency, phase shift, damping voltage or damping current of an electrical oscillator to a known calibrated condition. The acoustic wave device is actively cooled to monitor the deposition of constituents such as paraffins by determining the point at which solids from the liquid composition begin to form on the acoustic wave device. The acoustic wave device can be heated to melt or boil off the deposits to reset the monitor and the process can be repeated.

  19. Filtering with Marked Point Process Observations via Poisson Chaos Expansion

    SciTech Connect (OSTI)

    Sun Wei; Zeng Yong; Zhang Shu

    2013-06-15

    We study a general filtering problem with marked point process observations. The motivation comes from modeling financial ultra-high frequency data. First, we rigorously derive the unnormalized filtering equation with marked point process observations under mild assumptions, especially relaxing the bounded condition of stochastic intensity. Then, we derive the Poisson chaos expansion for the unnormalized filter. Based on the chaos expansion, we establish the uniqueness of solutions of the unnormalized filtering equation. Moreover, we derive the Poisson chaos expansion for the unnormalized filter density under additional conditions. To explore the computational advantage, we further construct a new consistent recursive numerical scheme based on the truncation of the chaos density expansion for a simple case. The new algorithm divides the computations into those containing solely system coefficients and those including the observations, and assign the former off-line.

  20. Parity-time symmetry broken by point-group symmetry

    SciTech Connect (OSTI)

    Fernndez, Francisco M. Garcia, Javier

    2014-04-15

    We discuss a parity-time (PT) symmetric Hamiltonian with complex eigenvalues. It is based on the dimensionless Schrdinger equation for a particle in a square box with the PT-symmetric potential V(x, y) = iaxy. Perturbation theory clearly shows that some of the eigenvalues are complex for sufficiently small values of |a|. Point-group symmetry proves useful to guess if some of the eigenvalues may already be complex for all values of the coupling constant. We confirm those conclusions by means of an accurate numerical calculation based on the diagonalization method. On the other hand, the Schrdinger equation with the potential V(x, y) = iaxy{sup 2} exhibits real eigenvalues for sufficiently small values of |a|. Point group symmetry suggests that PT-symmetry may be broken in the former case and unbroken in the latter one.

  1. SNL Starting Points | National Nuclear Security Administration | (NNSA)

    National Nuclear Security Administration (NNSA)

    SNL Starting Points Sandia Field Office Home Page SNL Contract DOE Directives NNSA Policy System SNL's Economic Impact Brochure SNL's Fact Sheets SNL's Accomplishments SNL Partnerships Annual Report (Added June 30) SNL Strategic Plan SNL Strategic Plan FY16-FY20 State of the Labs Presentation State of the Labs Presentation 2015 SNL Corporate Overview and Organization SNL Corporate Overview FY16 SNL Corporate Overview FY 16 Presenter Notes SNL Organization Chart Agreements 2014 MTC Joint Review

  2. New York Nuclear Profile - Nine Mile Point Nuclear Station

    U.S. Energy Information Administration (EIA) Indexed Site

    Nine Mile Point Nuclear Station" "Unit","Summer capacity (mw)","Net generation (thousand mwh)","Summer capacity factor (percent)","Type","Commercial operation date","License expiration date" 1,630,"5,294",95.9,"BWR","application/vnd.ms-excel","application/vnd.ms-excel"

  3. Phase-shifting point diffraction interferometer grating designs

    DOE Patents [OSTI]

    Naulleau, Patrick; Goldberg, Kenneth Alan; Tejnil, Edita

    2001-01-01

    In a phase-shifting point diffraction interferometer, by sending the zeroth-order diffraction to the reference pinhole of the mask and the first-order diffraction to the test beam window of the mask, the test and reference beam intensities can be balanced and the fringe contrast improved. Additionally, using a duty cycle of the diffraction grating other than 50%, the fringe contrast can also be improved.

  4. Superconductor-normal-superconductor with distributed Sharvin point contacts

    DOE Patents [OSTI]

    Holcomb, Matthew J.; Little, William A.

    1994-01-01

    A non-linear superconducting junction device comprising a layer of high transient temperature superconducting material which is superconducting at an operating temperature, a layer of metal in contact with the layer of high temperature superconducting material and which remains non-superconducting at the operating temperature, and a metal material which is superconducting at the operating temperature and which forms distributed Sharvin point contacts with the metal layer.

  5. Microsoft PowerPoint - Salishan (M Celia) Apr09

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Challenges in Geological Storage of Carbon Dioxide Computational Challenges in Geological Storage of Carbon Dioxide Jan Nordbotten (U. Bergen and Princeton U.) Sarah Gasda (U. North Carolina) Mark Dobossy (Princeton U.) Stefan Bachu (Alberta Research Council) Jan Nordbotten (U. Bergen and Princeton U.) Sarah Gasda (U. North Carolina) Mark Dobossy (Princeton U.) Stefan Bachu (Alberta Research Council) Michael A. Celia Princeton University Michael A. Celia Princeton University Three Main Points

  6. Enhanced test facility for OTEC at Keahole Point

    SciTech Connect (OSTI)

    Hillis, D.L.; Stevens, H.C.; Panchal, C.B.

    1983-01-01

    Additional test facilities are being planned for Keahole Point, Hawaii, that would greatly increase the amounts of warm and cold water available for OTEC research and development. Present activities include the design of seawater systems and a pumping station, using the existing OTEC-1 cold-water pipe and pumps. Future options include the installation of available heat exchangers and ammonia-system equipment, the addition of a turbine generator, and facilities for open- and closed-cycle testing of components and systems.

  7. An Update on Unmanned Platforms at Oliktok Point

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Update on Unmanned Platforms at Oliktok Point For original submission and image(s), see ARM Research Highlights http://www.arm.gov/science/highlights/ Research Highlight In the Arctic, unmanned aircraft systems (UAS) and tethered balloon systems (TBS) can make crucial atmospheric measurements to provide a unique perspective on an environment particularly vulnerable to climate change. To enable research on processes important to climate change in the Arctic-those involving aerosol particles,

  8. Development of a Multi-Point Microwave Interferometry (MPMI) Method

    SciTech Connect (OSTI)

    Specht, Paul Elliott; Cooper, Marcia A.; Jilek, Brook Anton

    2015-09-01

    A multi-point microwave interferometer (MPMI) concept was developed for non-invasively tracking a shock, reaction, or detonation front in energetic media. Initially, a single-point, heterodyne microwave interferometry capability was established. The design, construction, and verification of the single-point interferometer provided a knowledge base for the creation of the MPMI concept. The MPMI concept uses an electro-optic (EO) crystal to impart a time-varying phase lag onto a laser at the microwave frequency. Polarization optics converts this phase lag into an amplitude modulation, which is analyzed in a heterodyne interfer- ometer to detect Doppler shifts in the microwave frequency. A version of the MPMI was constructed to experimentally measure the frequency of a microwave source through the EO modulation of a laser. The successful extraction of the microwave frequency proved the underlying physical concept of the MPMI design, and highlighted the challenges associated with the longer microwave wavelength. The frequency measurements made with the current equipment contained too much uncertainty for an accurate velocity measurement. Potential alterations to the current construction are presented to improve the quality of the measured signal and enable multiple accurate velocity measurements.

  9. Dynamic behavior of articulated single point mooring system

    SciTech Connect (OSTI)

    Jain, A.K.

    1995-12-31

    Analysis of an Articulated Single Point Mooring System subjected to wave loading is presented. The analysis considers non-linearities caused due to Morison Equation`s hydrodynamic drag; variable buoyancy and variable added mass introduced by the variable submergence effect; the effect of instantaneous position of the tower; and the surge motion of the tanker transferred to the tower. The random time history of the oil tanker is derived with the help of it`s Response Amplitude Operator and the specified sea surface elevation spectrum. The analysis is carried out by an iterative frequency domain method which takes care of the above non-linearities. With the proposed method of analysis, a parametric study is conducted, in order to investigate the behavior of the single point mooring system subjected to random waves. The parameters include surge motion o the tanker, current velocity, random waves and point of attachment of the tanker to the tower. From the analysis, the mean peak value of the response and the statistics of the distribution of peak value of heel angle response are also obtained.

  10. Photovoltaics R&D: At the Tipping Point

    SciTech Connect (OSTI)

    Kazmerski, L. L.

    2005-01-01

    '' . . . with robust investments in research and market development, the picture changes dramatically.'' Thus, the realigned U.S. Photovoltaic Industry Roadmap highlights R&D as critical to the tipping point that will make solar photovoltaics (PV) significant in the U.S. energy portfolio--part of a well-designed plan that would bring ''2034 expectations'' to reality by 2020. Technology improvement and introduction depend on key, focused, and pertinent research contributions that range from the most fundamental through the applied. In this paper, we underscore the successes and relevance of our current systems-driven PV R&D programs, which are built on integrated capabilities. These capabilities span atomic-level characterization, nanotechnology, new materials design, interface and device engineering, theoretical guidance and modeling, processing, measurements and analysis, and process integration. This presentation identifies and provides examples of critical research tipping points needed to foster now and near technologies (primarily crystalline silicon and thin films) and to introduce coming generations of solar PV that provide options to push us to the next performance levels (devices with ultra-high efficiencies and with ultra-low cost). The serious importance of science and creativity to U.S. PV technology ownership--and the increased focus to accelerate the time from laboratory discovery to industry adoption--are emphasized at this ''tipping point'' for solar PV.

  11. EIS-0002: Allocation of Petroleum Feedstock, Baltimore Gas & Electric Co., Sollers Point SNG Plant, Sollers Point, Baltimore County, MD

    Broader source: Energy.gov [DOE]

    The Economic Regulatory Administration (ERA) developed this EIS to evaluate the social, economic and environmental impacts which may occur within the Baltimore Gas and Electric Company (BG&E) service area as a result of the ERA' s proposed decision to allocate up to 2,186,000 barrels per year of naphtha feedstock to BG&E to operate BG&E's existing synthetic natural gas facility located on Sollers Point in Baltimore County, Maryland.

  12. Microsoft PowerPoint - 15.1200_Ferraro | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    200Ferraro Microsoft PowerPoint - 15.1200Ferraro PDF icon Microsoft PowerPoint - 15.1200Ferraro More Documents & Publications SUMMITREPORT.pdf Microsoft PowerPoint - IFI...

  13. Microsoft PowerPoint - 15.1545_Fallon | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Microsoft PowerPoint - 5.3 Item 01 Top Kill Operation Status 09 June 1400.pptx Microsoft PowerPoint - Enterprise Top Hat Phases - 07-04-2010.pptx Microsoft PowerPoint - 15 Baker ...

  14. Microsoft PowerPoint - ShanasBioSlides121307 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ShanasBioSlides121307 Microsoft PowerPoint - ShanasBioSlides121307 PDF icon Microsoft PowerPoint - ShanasBioSlides121307 More Documents & Publications Microsoft PowerPoint - ...

  15. Microsoft PowerPoint - GE-Prolec CCE Meeting 10/19/2010 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Microsoft PowerPoint - GE-Prolec CCE Meeting 10192010 PowerPoint slides on GE-Prolec CCE meeting regarding Docket No. EERE-2010-BT-CE-0014 PDF icon Microsoft PowerPoint - ...

  16. EA-275-A NorthPoint Energy Solutions Inc | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    -A NorthPoint Energy Solutions Inc EA-275-A NorthPoint Energy Solutions Inc Order authorizing NorthPoint Energy Solutions Inc to export electric energy to Canada. PDF icon EA-275-A ...

  17. EA-275 NorthPoint Energy Solutions Inc | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    NorthPoint Energy Solutions Inc EA-275 NorthPoint Energy Solutions Inc Order authorizing NorthPoint Energy Solutions Inc to export electric energy to Canada. PDF icon EA-275 ...

  18. Wollaston prism phase-stepping point diffraction interferometer and method

    DOE Patents [OSTI]

    Rushford, Michael C.

    2004-10-12

    A Wollaston prism phase-stepping point diffraction interferometer for testing a test optic. The Wollaston prism shears light into reference and signal beams, and provides phase stepping at increased accuracy by translating the Wollaston prism in a lateral direction with respect to the optical path. The reference beam produced by the Wollaston prism is directed through a pinhole of a diaphragm to produce a perfect spherical reference wave. The spherical reference wave is recombined with the signal beam to produce an interference fringe pattern of greater accuracy.

  19. Phase-shifting point diffraction interferometer phase grating designs

    DOE Patents [OSTI]

    Naulleau, Patrick (Oakland, CA)

    2001-01-01

    Diffraction phase gratings are employed in phase-shifting point diffraction interferometers to improve the interferometric fringe contrast. The diffraction phase grating diffracts a zeroth-order diffraction of light at a first power level to the test-beam window of a mask that is positioned at the image plane and a first-order diffraction at a second power to the reference-beam pinhole. The diffraction phase grating is preferably selected to yield a desired ratio of the first power level to second power level.

  20. Relativistic Point Coupling Model for Vibrational Excitations in the Continuum

    SciTech Connect (OSTI)

    Ring, P.; Daoutidis, J.; Litvinova, E.; Niksic, T.; Paar, N.; Vretenar, D.

    2009-08-26

    An implementation of the relativistic random phase approximation with the proper treatment of the continuum has been developed for the relativistic point coupling model and applied to investigate collective excitations in spherical nuclei. The results are compared with the spectral implementation of the same model. In heavy nuclei, where the escape width is negligible, we find an excellent agreement between both methods in the region of giant resonance and some discrepancies in the region of low-lying pygmy resonance. The differences are more pronounced in light nuclei due to the larger values of the escape widths.

  1. EDD-7 Electric Charge Point Meter test results

    SciTech Connect (OSTI)

    Mersman, C.R.

    1993-09-01

    The results of tests evaluating the electric switching portion of the EDD-7 Electric Charge Point Meter (ECPM) are presented. The ECPM is a modified parking meter that allows the purchase of 120 or 240 volt electric power. The ECPM is designed to make electricity available at any vehicle parking location. The test results indicate that the ECPM operated without failure thru a series of over current and ground fault tests at three different test temperatures. The magnitude of current required to trip the over current protection circuitry varied with temperature while the performance of the ground fault interruption circuitry did not change significantly with the test temperature.

  2. EA-1942: Cove Point Liquefaction Project, Lusby, Maryland

    Broader source: Energy.gov [DOE]

    The Federal Energy Regulatory Commission (FERC) prepared an EA that examined the potential environmental impacts of a proposal to add natural gas liquefaction and exportation capabilities to the existing Cove Point LNG Terminal. DOE, Office of Fossil Energy, was a cooperating agency because it had an obligation under Section 3 of the Natural Gas Act to authorize the import and export of natural gas, including LNG, unless it found that the import or export is not consistent with the public interest. DOE adopted FERC’s EA and issued a Finding of No Significant Impact.

  3. Microsoft PowerPoint - NUG2008-UserSurvey

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    /2008 User Survey results Francesca Verdier NERSC User Group Meeting October 3, 2008 2 Response Profile ASCR 11.3% BER 11.8% BES 28.5% FES 13.7% HEP 12.4% NP 22.3% PIs 15.2% Proj Mgrs 15 % Users 69.8% 457 respondents * 70% "big user" response rate * 43% "medium user" response rate * 16.3% overall response rate 3 2007/2008 Survey Questions * 128 satisfaction questions scored on a 7-point scale * average score: 6.07 51 Very dissatisfied 1 75 Mostly dissatisfied 2 251 Somewhat

  4. Low-melting point inorganic nitrate salt heat transfer fluid

    DOE Patents [OSTI]

    Bradshaw, Robert W.; Brosseau, Douglas A.

    2009-09-15

    A low-melting point, heat transfer fluid made of a mixture of four inorganic nitrate salts: 9-18 wt % NaNO.sub.3, 40-52 wt % KNO.sub.3, 13-21 wt % LiNO.sub.3, and 20-27 wt % Ca(NO.sub.3).sub.2. These compositions can have liquidus temperatures less than 100 C; thermal stability limits greater than 500 C; and viscosity in the range of 5-6 cP at 300 C; and 2-3 cP at 400 C.

  5. Wave chaos in quantum systems with point interaction

    SciTech Connect (OSTI)

    Albeverio, S. (Ruhr Univ. Bochum (West Germany) CERFIM, Locarno (Switzerland)); Seba, P. (Ruhr Univ. Bochum (West Germany) Univ. of Essen (West Germany))

    1991-07-01

    The authors study perturbations {cflx H} of the quantized version {cflx H}{sub 0} of integrable Hamiltonian systems by point interactions. They relate the eigenvalues of {cflx H} to the zeros of a certain meromorphic function {xi}. Assuming the eigenvalues of {cflx H}{sub 0} are Poisson distributed, they get detailed information on the joint distribution of the zeros of {xi} and give bounds on the probability density for the spacings of eigenvalues of {cflx H}. Their results confirm the wave chaos phenomenon, as different from the quantum chaos phenomenon predicted by random matrix theory.

  6. Points of Contact (POCs) | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    Points of Contact (POCs) NBL Program Office NBL PO Home About Organization Chart .pdf file (159KB) Points of Contact (POCs) History Directions Jobs Programs Certified Reference ...

  7. Point-focus concentrator reflector assembly: Phase 1

    SciTech Connect (OSTI)

    Not Available

    1987-11-01

    A point-focus concentrator reflective assembly was developed in Phase I on contract 21-3695 under the direction of Sandia National Laboratories, Albuquerque. This concentrator is conventonal in presentation, yet innovative in detail. The development concentrated on structural efficiency and production design to achieve a high performance at minimum cost. The concentrator design achievs stiffness and strength through the integration of two structural elements. The optical element provides the reflective surface accuracy; a secondary support structure provides resistance to uniform and non-uniform load conditions. A retractable receiver strut, which moves the power conversion assembly out of focus in emergency power loss, was also incorporated. This same assembly provides maintanance access to the engine near ground level. A full-scale optical element was fabricated. Slope error was measured at 1 mrad. Concentrator performance was projected to be 88%, optical. This point-focus concentrator reflector assembly design provides low weight, low cost, and simplicity. Our analysis indicates these benefits are gained without impairing performance. 7 refs., 44 figs., 10 tabs.

  8. Controlling systems that drift through a tipping point

    SciTech Connect (OSTI)

    Nishikawa, Takashi; Ott, Edward

    2014-09-01

    Slow parameter drift is common in many systems (e.g., the amount of greenhouse gases in the terrestrial atmosphere is increasing). In such situations, the attractor on which the system trajectory lies can be destroyed, and the trajectory will then go to another attractor of the system. We consider the case where there are more than one of these possible final attractors, and we ask whether we can control the outcome (i.e., the attractor that ultimately captures the trajectory) using only small controlling perturbations. Specifically, we consider the problem of controlling a noisy system whose parameter slowly drifts through a saddle-node bifurcation taking place on a fractal boundary between the basins of multiple attractors. We show that, when the noise level is low, a small perturbation of size comparable to the noise amplitude applied at a single point in time can ensure that the system will evolve toward a target attracting state with high probability. For a range of noise levels, we find that the minimum size of perturbation required for control is much smaller within a time period that starts some time after the bifurcation, providing a window of opportunity for driving the system toward a desirable state. We refer to this procedure as tipping point control.

  9. A search for point sources of EeV photons

    SciTech Connect (OSTI)

    Aab, A.; Abreu, P.; Andringa, S.; Aglietta, M.; Ahlers, M.; Ahn, E. J.; Al Samarai, I.; Albuquerque, I. F. M.; Allekotte, I.; Allen, J.; Allison, P.; Almela, A.; Castillo, J. Alvarez; Alvarez-Muñiz, J.; Batista, R. Alves; Ambrosio, M.; Aramo, C.; Aminaei, A.; Anchordoqui, L.; Arqueros, F.; Collaboration: Pierre Auger Collaboration102; and others

    2014-07-10

    Measurements of air showers made using the hybrid technique developed with the fluorescence and surface detectors of the Pierre Auger Observatory allow a sensitive search for point sources of EeV photons anywhere in the exposed sky. A multivariate analysis reduces the background of hadronic cosmic rays. The search is sensitive to a declination band from –85° to +20°, in an energy range from 10{sup 17.3} eV to 10{sup 18.5} eV. No photon point source has been detected. An upper limit on the photon flux has been derived for every direction. The mean value of the energy flux limit that results from this, assuming a photon spectral index of –2, is 0.06 eV cm{sup –2} s{sup –1}, and no celestial direction exceeds 0.25 eV cm{sup –2} s{sup –1}. These upper limits constrain scenarios in which EeV cosmic ray protons are emitted by non-transient sources in the Galaxy.

  10. AmeriFlux US-WPT Winous Point North Marsh

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Chen, Jiquan [University of Toledo / Michigan State University

    2016-01-01

    This is the AmeriFlux version of the carbon flux data for the site US-WPT Winous Point North Marsh. Site Description - The marsh site has been owned by the Winous Point Shooting Club since 1856 and has been managed by wildlife biologists since 1946. The hydrology of the marsh is relatively isolated by the surrounding dikes and drainages and only receives drainage from nearby croplands through three connecting ditches. Since 2001, the marsh has been managed to maintain year-round inundation with the lowest water levels in September. Within the 0–250 m fetch of the tower, the marsh comprises 42.9% of floating-leaved vegetation, 52.7% of emergent vegetation, and 4.4% of dike and upland during the growing season. Dominant emergent plants include narrow-leaved cattail (Typha angustifolia), rose mallow (Hibiscus moscheutos), and bur reed (Sparganium americanum). Common floating-leaved species are water lily (Nymphaea odorata) and American lotus (Nelumbo lutea) with foliage usually covering the water surface from late May to early October.

  11. Integrated Synthesis of the Permian Basin: Data and Models for Recovering Existing and Undiscovered Oil Resources from the Largest Oil-Bearing Basin in the U.S.

    SciTech Connect (OSTI)

    John Jackson; Katherine Jackson

    2008-09-30

    Large volumes of oil and gas remain in the mature basins of North America. This is nowhere more true than in the Permian Basin of Texas and New Mexico. A critical barrier to recovery of this vast remaining resource, however, is information. Access to accurate geological data and analyses of the controls of hydrocarbon distribution is the key to the knowledge base as well as the incentives needed by oil and gas companies. The goals of this project were to collect, analyze, synthesize, and deliver to industry and the public fundamental information and data on the geology of oil and gas systems in the Permian Basin. This was accomplished in two ways. First we gathered all available data, organized it, and placed it on the web for ready access. Data include core analysis data, lists of pertinent published reports, lists of available cores, type logs, and selected PowerPoint presentations. We also created interpretive data such as type logs, geological cross sections, and geological maps and placed them in a geospatially-registered framework in ARC/GIS. Second, we created new written syntheses of selected reservoir plays in the Permian basin. Although only 8 plays were targeted for detailed analysis in the project proposal to DOE, 14 were completed. These include Ellenburger, Simpson, Montoya, Fusselman, Wristen, Thirtyone, Mississippian, Morrow, Atoka, Strawn, Canyon/Cisco, Wolfcamp, Artesia Group, and Delaware Mountain Group. These fully illustrated reports include critical summaries of published literature integrated with new unpublished research conducted during the project. As such these reports provide the most up-to-date analysis of the geological controls on reservoir development available. All reports are available for download on the project website and are also included in this final report. As stated in our proposal, technology transfer is perhaps the most important component of the project. In addition to providing direct access to data and reports through

  12. Quantum critical points of an anisotropic multichannel Kondo impurity

    SciTech Connect (OSTI)

    Schlottmann, P.

    2001-06-01

    The low-temperature behavior of a magnetic impurity of spin S interacting with an electron gas via an anisotropic spin exchange is studied via Bethe{close_quote}s ansatz. The multichannel Kondo model with U(1) invariance is integrable as a function of two continuous (the exchange and the anisotropy) and two discrete parameters, namely the impurity spin S and the number of channels n. As a function of S and n we distinguish: (i) the compensated case with n=2S, (ii) the overcompensated case if n{gt}2S, and (iii) the undercompensated case (n{lt}2S). While in case (i) the ground state is a singlet, the cases (ii), and (iii) yield quantum critical points. The undercompensated one is of a new type with the critical exponents depending on the anisotropy. {copyright} 2001 American Institute of Physics.

  13. Material point method modeling in oil and gas reservoirs

    DOE Patents [OSTI]

    Vanderheyden, William Brian; Zhang, Duan

    2016-06-28

    A computer system and method of simulating the behavior of an oil and gas reservoir including changes in the margins of frangible solids. A system of equations including state equations such as momentum, and conservation laws such as mass conservation and volume fraction continuity, are defined and discretized for at least two phases in a modeled volume, one of which corresponds to frangible material. A material point model technique for numerically solving the system of discretized equations, to derive fluid flow at each of a plurality of mesh nodes in the modeled volume, and the velocity of at each of a plurality of particles representing the frangible material in the modeled volume. A time-splitting technique improves the computational efficiency of the simulation while maintaining accuracy on the deformation scale. The method can be applied to derive accurate upscaled model equations for larger volume scale simulations.

  14. Securing Single Points of Compromise (SPoC)

    SciTech Connect (OSTI)

    Belangia, David Warren

    2015-06-25

    Securing the Single Points of Compromise that provide central services to the institution’s environment is paramount to success when trying to protect the business. (Fisk, 2014) Time Based Security mandates protection (erecting and ensuring effective controls) that last longer than the time to detect and react to a compromise. When enterprise protections fail, providing additional layered controls for these central services provides more time to detect and react. While guidance is readily available for securing the individual critical asset, protecting these assets as a group is not often discussed. Using best business practices to protect these resources as individual assets while leveraging holistic defenses for the group increases the opportunity to maximize protection time, allowing detection and reaction time for the SPoCs that is commensurate with the inherent risk of these centralized services.

  15. Fixed-rate compressed floating-point arrays

    Energy Science and Technology Software Center (OSTI)

    2014-03-30

    ZFP is a library for lossy compression of single- and double-precision floating-point data. One of the unique features of ZFP is its support for fixed-rate compression, which enables random read and write access at the granularity of small blocks of values. Using a C++ interface, this allows declaring compressed arrays (1D, 2D, and 3D arrays are supported) that through operator overloading can be treated just like conventional, uncompressed arrays, but which allow the user tomore » specify the exact number of bits to allocate to the array. ZFP also has variable-rate fixed-precision and fixed-accuracy modes, which allow the user to specify a tolerance on the relative or absolute error.« less

  16. Phase-shifting point diffraction interferometer mask designs

    DOE Patents [OSTI]

    Goldberg, Kenneth Alan

    2001-01-01

    In a phase-shifting point diffraction interferometer, different image-plane mask designs can improve the operation of the interferometer. By keeping the test beam window of the mask small compared to the separation distance between the beams, the problem of energy from the reference beam leaking through the test beam window is reduced. By rotating the grating and mask 45.degree., only a single one-dimensional translation stage is required for phase-shifting. By keeping two reference pinholes in the same orientation about the test beam window, only a single grating orientation, and thus a single one-dimensional translation stage, is required. The use of a two-dimensional grating allows for a multiplicity of pinholes to be used about the pattern of diffracted orders of the grating at the mask. Orientation marks on the mask can be used to orient the device and indicate the position of the reference pinholes.

  17. Computation of multi-material interactions using point method

    SciTech Connect (OSTI)

    Zhang, Duan Z; Ma, Xia; Giguere, Paul T

    2009-01-01

    Calculations of fluid flows are often based on Eulerian description, while calculations of solid deformations are often based on Lagrangian description of the material. When the Eulerian descriptions are used to problems of solid deformations, the state variables, such as stress and damage, need to be advected, causing significant numerical diffusion error. When Lagrangian methods are used to problems involving large solid deformat ions or fluid flows, mesh distortion and entanglement are significant sources of error, and often lead to failure of the calculation. There are significant difficulties for either method when applied to problems involving large deformation of solids. To address these difficulties, particle-in-cell (PIC) method is introduced in the 1960s. In the method Eulerian meshes stay fixed and the Lagrangian particles move through the Eulerian meshes during the material deformation. Since its introduction, many improvements to the method have been made. The work of Sulsky et al. (1995, Comput. Phys. Commun. v. 87, pp. 236) provides a mathematical foundation for an improved version, material point method (MPM) of the PIC method. The unique advantages of the MPM method have led to many attempts of applying the method to problems involving interaction of different materials, such as fluid-structure interactions. These problems are multiphase flow or multimaterial deformation problems. In these problems pressures, material densities and volume fractions are determined by satisfying the continuity constraint. However, due to the difference in the approximations between the material point method and the Eulerian method, erroneous results for pressure will be obtained if the same scheme used in Eulerian methods for multiphase flows is used to calculate the pressure. To resolve this issue, we introduce a numerical scheme that satisfies the continuity requirement to higher order of accuracy in the sense of weak solutions for the continuity equations

  18. Hybrid shearing and phase-shifting point diffraction interferometer

    DOE Patents [OSTI]

    Goldberg, Kenneth Alan; Naulleau, Patrick P.

    2003-06-03

    A new interferometry configuration combines the strengths of two existing interferometry methods, improving the quality and extending the dynamic range of both. On the same patterned mask, placed near the image-plane of an optical system under test, patterns for phase-shifting point diffraction interferometry and lateral shearing interferometry coexist. The former giving verifiable high accuracy for the measurement of nearly diffraction-limited optical systems. The latter enabling the measurement of optical systems with more than one wave of aberration in the system wavefront. The interferometry configuration is a hybrid shearing and point diffraction interferometer system for testing an optical element that is positioned along an optical path including: a source of electromagnetic energy in the optical path; a first beam splitter that is secured to a device that includes means for maneuvering the first beam splitter in a first position wherein the first beam splitter is in the optical path dividing light from the source into a reference beam and a test beam and in a second position wherein the first beam splitter is outside the optical path: a hybrid mask which includes a first section that defines a test window and at least one reference pinhole and a second section that defines a second beam splitter wherein the hybrid mask is secured to a device that includes means for maneuvering either the first section or the second section into the optical path positioned in an image plane that is created by the optical element, with the proviso that the first section of the hybrid mask is positioned in the optical path when first beam splitter is positioned in the optical path; and a detector positioned after the hybrid mask along the optical path.

  19. Analysis of single point moored tanker using maneuvering hydrodynamic model

    SciTech Connect (OSTI)

    Nishimoto, K.; Brinati, H.L.; Fucatu, C.H.

    1995-12-31

    The Single Point Mooring Systems (SPM) are widely used as a tanker terminal in Brazilian south coast by Petrobras, Brazilian oil company. Although different authors (Wichers, 1987, Obokata, 1987, and Jiang et al., 1988) had analyzed the dynamic stability of SPM system, the down time of these systems due to large oscillatory ship motion in the horizontal plane is significant until now. The main source of the instability of these systems is considered to be the use of inadequate hawser length and bad weather. This paper deals with the dynamic behavior of SPM moored vessels considering the influence of the environmental forces as well as shallow water effects. In a first step, a nonlinear mathematical model developed for the simulation of low speed ship maneuvers (Takashina, 1986) is extended to study the behavior of a tanker moored to a single buoy in comparison with the Obokata`s SPM model, 1987. A large number of tanker motion simulations were carried out both for deep and shallow water and different environmental conditions. The influence of the system parameters shown by the study is, in general, in a good agreement with those obtained by the traditional SPM system analysis.

  20. Quantum-to-classical crossover near quantum critical point

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Vasin, M.; Ryzhov, V.; Vinokur, V. M.

    2015-12-21

    A quantum phase transition (QPT) is an inherently dynamic phenomenon. However, while non-dissipative quantum dynamics is described in detail, the question, that is not thoroughly understood is how the omnipresent dissipative processes enter the critical dynamics near a quantum critical point (QCP). Here we report a general approach enabling inclusion of both adiabatic and dissipative processes into the critical dynamics on the same footing. We reveal three distinct critical modes, the adiabatic quantum mode (AQM), the dissipative classical mode [classical critical dynamics mode (CCDM)], and the dissipative quantum critical mode (DQCM). We find that as a result of the transitionmore » from the regime dominated by thermal fluctuations to that governed by the quantum ones, the system acquires effective dimension d+zΛ(T), where z is the dynamical exponent, and temperature-depending parameter Λ(T)ε[0, 1] decreases with the temperature such that Λ(T=0) = 1 and Λ(T →∞) = 0. Lastly, our findings lead to a unified picture of quantum critical phenomena including both dissipation- and dissipationless quantum dynamic effects and offer a quantitative description of the quantum-to-classical crossover.« less

  1. Quantum-to-classical crossover near quantum critical point

    SciTech Connect (OSTI)

    Vasin, M.; Ryzhov, V.; Vinokur, V. M.

    2015-12-21

    A quantum phase transition (QPT) is an inherently dynamic phenomenon. However, while non-dissipative quantum dynamics is described in detail, the question, that is not thoroughly understood is how the omnipresent dissipative processes enter the critical dynamics near a quantum critical point (QCP). Here we report a general approach enabling inclusion of both adiabatic and dissipative processes into the critical dynamics on the same footing. We reveal three distinct critical modes, the adiabatic quantum mode (AQM), the dissipative classical mode [classical critical dynamics mode (CCDM)], and the dissipative quantum critical mode (DQCM). We find that as a result of the transition from the regime dominated by thermal fluctuations to that governed by the quantum ones, the system acquires effective dimension d+zΛ(T), where z is the dynamical exponent, and temperature-depending parameter Λ(T)ε[0, 1] decreases with the temperature such that Λ(T=0) = 1 and Λ(T →∞) = 0. Lastly, our findings lead to a unified picture of quantum critical phenomena including both dissipation- and dissipationless quantum dynamic effects and offer a quantitative description of the quantum-to-classical crossover.

  2. Point Defects in Binary Laves-Phase Alloys

    SciTech Connect (OSTI)

    Liaw, P.K.; Liu, C.T.; Pike, L.M.; Zhu, J.H.

    1998-11-30

    Point defect mechanisms in the binary C15 NbCr{sub 2} and NbCo{sub 2}, and C14 NbFe{sub 2} systems on both sides of stoichiometry was studied and clarified by both bulk density and X-ray lattice parameter measurements. It was found that the vacancy concentrations in these systems after quenching from 1000 C are essentially zero. The constitutional defects on both sides of stoichiometry for these systems were found to be of the anti-site type in comparison with the model predictions. However, thermal vacancies exhibiting a maximum at the stoichiometric composition were obtained in NbCr{sub 2} laves phase alloys after quenching from 1400 C. These could be completely eliminated by annealing at 1000 C. Anti-site hardening was found on both sides of stoichiometry for all three Laves phase systems studied. Furthermore, the thermal vacancies in NbCr{sub 2} alloys after quenching from 1400 C were found to soften the Laves phase. The anti-site hardening of the Laves phases is similar to that of the B2 compounds, while the thermal vacancy softening is unique to the Laves phase. Both the anti-site defects and thermal vacancies do not significantly affect the fracture toughness of the Laves phases.

  3. Dynamics near QCD critical point by dynamic renormalization group

    SciTech Connect (OSTI)

    Minami, Yuki

    2011-05-01

    We work out the basic analysis on dynamics near the QCD critical point (CP) by the dynamic renormalization group (RG). In addition to the RG analysis by coarse-graining, we construct the nonlinear Langevin equation as a basic equation for the critical dynamics. Our construction is based on the generalized Langevin theory and the relativistic hydrodynamics. Applying the dynamic RG to the constructed equation, we derive the RG equation for the transport coefficients and analyze their critical behaviors. We find that the resulting RG equation turns out to be the same as that for the liquid-gas CP except for an insignificant constant. Therefore, the bulk viscosity and the thermal conductivity strongly diverge at the QCD CP. We also show that the thermal and viscous diffusion modes exhibit critical slowing down with the dynamic critical exponents z{sub thermal}{approx}3 and z{sub viscous}{approx}2, respectively. In contrast, the sound propagating mode shows critical speeding up with the negative exponent z{sub sound}{approx}-0.8.

  4. A multiscale two-point flux-approximation method

    SciTech Connect (OSTI)

    Myner, Olav Lie, Knut-Andreas

    2014-10-15

    A large number of multiscale finite-volume methods have been developed over the past decade to compute conservative approximations to multiphase flow problems in heterogeneous porous media. In particular, several iterative and algebraic multiscale frameworks that seek to reduce the fine-scale residual towards machine precision have been presented. Common for all such methods is that they rely on a compatible primaldual coarse partition, which makes it challenging to extend them to stratigraphic and unstructured grids. Herein, we propose a general idea for how one can formulate multiscale finite-volume methods using only a primal coarse partition. To this end, we use two key ingredients that are computed numerically: (i) elementary functions that correspond to flow solutions used in transmissibility upscaling, and (ii) partition-of-unity functions used to combine elementary functions into basis functions. We exemplify the idea by deriving a multiscale two-point flux-approximation (MsTPFA) method, which is robust with regards to strong heterogeneities in the permeability field and can easily handle general grids with unstructured fine- and coarse-scale connections. The method can easily be adapted to arbitrary levels of coarsening, and can be used both as a standalone solver and as a preconditioner. Several numerical experiments are presented to demonstrate that the MsTPFA method can be used to solve elliptic pressure problems on a wide variety of geological models in a robust and efficient manner.

  5. Simulating full QCD with the fixed point action

    SciTech Connect (OSTI)

    Hasenfratz, Anna; Hasenfratz, Peter; Niedermayer, Ferenc

    2005-12-01

    Because of its complex structure the parametrized fixed point action can not be simulated with the available local updating algorithms. We constructed, coded, and tested an updating procedure with 2+1 light flavors, where the targeted s quark mass is at its physical value while the u and d quarks should produce pions lighter than 300 MeV. In the algorithm a partially global gauge update is followed by several accept/reject steps, where parts of the determinant are switched on gradually in the order of their costs. The trial configuration that is offered in the last, most expensive, stochastic accept/reject step differs from the original configuration by a Metropolis + over-relaxation gauge update over a subvolume of {approx}(1.3 fm){sup 4}. The acceptance rate in this accept/reject step is {approx}0.4. The code is optimized on different architectures and is running on lattices with L{sub s}{approx_equal}1.2 fm and 1.8 fm at a resolution of a{approx_equal}0.15 fm.

  6. Synchrotron Radiation Therapy from a Medical Physics point of view

    SciTech Connect (OSTI)

    Prezado, Y.; Berkvens, P.; Braeuer-Krisch, E.; Renier, M.; Bravin, A.; Adam, J. F.; Martinez-Rovira, I.; Fois, G.; Thengumpallil, S.; Edouard, M.; Deman, P.; Vautrin, M.

    2010-07-23

    Synchrotron radiation (SR) therapy is a promising alternative to treat brain tumors, whose management is limited due to the high morbidity of the surrounding healthy tissues. Several approaches are being explored by using SR at the European Synchrotron Radiation Facility (ESRF), where three techniques are under development Synchrotron Stereotactic Radiation Therapy (SSRT), Microbeam Radiation Therapy (MRT) and Minibeam Radiation Therapy (MBRT).The sucess of the preclinical studies on SSRT and MRT has paved the way to clinical trials currently in preparation at the ESRF. With this aim, different dosimetric aspects from both theoretical and experimental points of view have been assessed. In particular, the definition of safe irradiation protocols, the beam energy providing the best balance between tumor treatment and healthy tissue sparing in MRT and MBRT, the special dosimetric considerations for small field dosimetry, etc will be described. In addition, for the clinical trials, the definition of appropiate dosimetry protocols for patients according to the well established European Medical Physics recommendations will be discussed. Finally, the state of the art of the MBRT technical developments at the ESRF will be presented. In 2006 A. Dilmanian and collaborators proposed the use of thicker microbeams (0.36-0.68 mm). This new type of radiotherapy is the most recently implemented technique at the ESRF and it has been called MBRT. The main advantage of MBRT with respect to MRT is that it does not require high dose rates. Therefore it can be more easily applied and extended outside synchrotron sources in the future.

  7. Environmental geophysics at Beach Point, Aberdeen Proving Ground, Maryland

    SciTech Connect (OSTI)

    McGinnis, L.D.; Daudt, C.R.; Thompson, M.D.; Miller, S.F.; Mandell, W.A.; Wrobel, J.

    1994-07-01

    Geophysical studies at Beach Point Peninsula, in the Edgewood area of Aberdeen Proving Ground, Maryland, provide diagnostic signatures of the hydrogeologic framework and possible contaminant pathways. These studies permit construction of the most reasonable scenario linking dense, nonaqueous-phase liquid contaminants introduced at the surface with their pathway through the surficial aquifer. Subsurface geology and contaminant presence were identified by drilling, outcrop mapping, and groundwater sampling and analyses. Suspected sources of near-surface contaminants were defined by magnetic and conductivity measurements. Negative conductivity anomalies may be associated with unlined trenches. Positive magnetic and conductivity anomalies outline suspected tanks and pipes. The anomalies of greatest concern are those spatially associated with a concrete slab that formerly supported a mobile clothing impregnating plant. Resistivity and conductivity profiling and depth soundings were used to identify an electrical anomaly extending through the surficial aquifer to the basal pleistocene unconformity, which was mapped by using seismic reflection methods. The anomaly may be representative of a contaminant plume connected to surficial sources. Major activities in the area included liquid rocket fuel tests, rocket fuel fire suppression tests, pyrotechnic material and smoke generator tests, and the use of solvents at a mobile clothing impregnating plant.

  8. Microsoft PowerPoint - Pillon Climate Change and the Need for Energy Resiliency Tribal Energy Systems March 2015.pptx

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Climate Change and the Need for Energy Resiliency Jeffrey R. Pillon, Director of Energy Assurance National Association of State Energy Officials TRIBAL ENERGY SYSTEMS: CLIMATE PREPAREDNESS AND RESILIENCY March 4, 2015 Lincoln, California + What is Resilience?  Resilience, is defined in Presidential Policy Directive 21, as "the ability to prepare for and adapt to changing conditions and withstand and recover rapidly from disruptions...[it] includes the ability to withstand and recover

  9. Providing nearest neighbor point-to-point communications among compute nodes of an operational group in a global combining network of a parallel computer

    DOE Patents [OSTI]

    Archer, Charles J.; Faraj, Ahmad A.; Inglett, Todd A.; Ratterman, Joseph D.

    2012-10-23

    Methods, apparatus, and products are disclosed for providing nearest neighbor point-to-point communications among compute nodes of an operational group in a global combining network of a parallel computer, each compute node connected to each adjacent compute node in the global combining network through a link, that include: identifying each link in the global combining network for each compute node of the operational group; designating one of a plurality of point-to-point class routing identifiers for each link such that no compute node in the operational group is connected to two adjacent compute nodes in the operational group with links designated for the same class routing identifiers; and configuring each compute node of the operational group for point-to-point communications with each adjacent compute node in the global combining network through the link between that compute node and that adjacent compute node using that link's designated class routing identifier.

  10. Inertial fusion energy target injection, tracking, and beam pointing

    SciTech Connect (OSTI)

    Petzoldt, R.W.

    1995-03-07

    Several cryogenic targets must be injected each second into a reaction chamber. Required target speed is about 100 m/s. Required accuracy of the driver beams on target is a few hundred micrometers. Fuel strength is calculated to allow acceleration in excess of 10,000 m/s{sup 2} if the fuel temperature is less than 17 K. A 0.1 {mu}m thick dual membrane will allow nearly 2,000 m/s{sup 2} acceleration. Acceleration is gradually increased and decreased over a few membrane oscillation periods (a few ms), to avoid added stress from vibrations which could otherwise cause a factor of two decrease in allowed acceleration. Movable shielding allows multiple targets to be in flight toward the reaction chamber at once while minimizing neutron heating of subsequent targets. The use of multiple injectors is recommended for redundancy which increases availability and allows a higher pulse rate. Gas gun, rail gun, induction accelerator, and electrostatic accelerator target injection devices are studied, and compared. A gas gun is the preferred device for indirect-drive targets due to its simplicity and proven reliability. With the gas gun, the amount of gas required for each target (about 10 to 100 mg) is acceptable. A revolver loading mechanism is recommended with a cam operated poppet valve to control the gas flow. Cutting vents near the muzzle of the gas gun barrel is recommended to improve accuracy and aid gas pumping. If a railgun is used, we recommend an externally applied magnetic field to reduce required current by an order of magnitude. Optical target tracking is recommended. Up/down counters are suggested to predict target arrival time. Target steering is shown to be feasible and would avoid the need to actively point the beams. Calculations show that induced tumble from electrostatically steering the target is not excessive.

  11. V-112: Microsoft SharePoint Input Validation Flaws Permit Cross-Site Scripting and Denial of Service Attacks

    Broader source: Energy.gov [DOE]

    This security update resolves four reported vulnerabilities in Microsoft SharePoint and Microsoft SharePoint Foundation.

  12. Microsoft PowerPoint - 10 Lee LCLS Lessons Learned PM Workshop...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications LINAC Coherent Light Source Microsoft PowerPoint - 16.1045Peer Reviews PanelLehman Workshop Briefing w-headings Microsoft PowerPoint - 09 Lehman ...

  13. Microsoft PowerPoint - 15.1500_Michael Deane [Compatibility Mode...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    00Michael Deane Compatibility Mode Microsoft PowerPoint - 15.1500Michael Deane Compatibility Mode PDF icon Microsoft PowerPoint - 15.1500Michael Deane Compatibility Mode...

  14. Microsoft PowerPoint - 16.1555_Chad Henderson_Final | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    555Chad HendersonFinal Microsoft PowerPoint - 16.1555Chad HendersonFinal PDF icon Microsoft PowerPoint - 16.1555Chad HendersonFinal More Documents & Publications Microsoft...

  15. Microsoft PowerPoint - 16.1330_Rimando 110316 rev3 [Compatibility...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    330Rimando 110316 rev3 Compatibility Mode Microsoft PowerPoint - 16.1330Rimando 110316 rev3 Compatibility Mode PDF icon Microsoft PowerPoint - 16.1330Rimando 110316 rev3...

  16. Microsoft PowerPoint - FY09_10 Validations_Archiving_090804 ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FY0910 ValidationsArchiving090804 Microsoft PowerPoint - FY0910 ValidationsArchiving090804 PDF icon Microsoft PowerPoint - FY0910 ValidationsArchiving090804 More Documents...

  17. Microsoft PowerPoint - 15.1315_Arniban Basu | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    315Arniban Basu Microsoft PowerPoint - 15.1315Arniban Basu PDF icon Microsoft PowerPoint - 15.1315Arniban Basu More Documents & Publications Economic Environment - Arniban Basu,...

  18. Microsoft PowerPoint - 16.0855_Raines Draft Rev 4 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    55Raines Draft Rev 4 Microsoft PowerPoint - 16.0855Raines Draft Rev 4 PDF icon Microsoft PowerPoint - 16.0855Raines Draft Rev 4 More Documents & Publications Enhancing Earned...

  19. Microsoft PowerPoint - 16.0805_Tom Fox [Compatibility Mode] ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    05Tom Fox Compatibility Mode Microsoft PowerPoint - 16.0805Tom Fox Compatibility Mode PDF icon Microsoft PowerPoint - 16.0805Tom Fox Compatibility Mode More Documents &...

  20. Microsoft PowerPoint - 16.1225_Terry Cooke-Davies - Project Complexity...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    225Terry Cooke-Davies - Project Complexity as of 16 Mar Microsoft PowerPoint - 16.1225Terry Cooke-Davies - Project Complexity as of 16 Mar PDF icon Microsoft PowerPoint -...

  1. Microsoft PowerPoint -Risk_Portfolio_Manager(RPM)_overview_Under...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PowerPoint - RiskPortfolioManager(RPM)overviewUnderSecDOE2011V4 Final 3-22-2011.ppt Read-Only Compatibili Microsoft PowerPoint - RiskPortfolioManager(RPM)overviewUn...

  2. Bifurcated method and apparatus for floating point addition with decreased latency time

    DOE Patents [OSTI]

    Farmwald, Paul M.

    1987-01-01

    Apparatus for decreasing the latency time associated with floating point addition and subtraction in a computer, using a novel bifurcated, pre-normalization/post-normalization approach that distinguishes between differences of floating point exponents.

  3. Microsoft PowerPoint - 15.1025_Bosco_PM Workshop Mar15_2010 ...

    Office of Environmental Management (EM)

    More Documents & Publications Microsoft PowerPoint - DOE O 413 3B Brief v9 with key points in notes Read-Only Slide 1 External Independent Review (EIR) Standard Operating ...

  4. Microsoft PowerPoint - 12 Holman White PM Conference 2010 Rev...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDF icon Microsoft PowerPoint - 12 Holman White PM Conference 2010 Rev 2 revised More Documents & Publications Microsoft PowerPoint - 5.3 Item 01 Top Kill Operation Status 09 June ...

  5. Microsoft PowerPoint - AGA webinar July 2013 Final .pptx | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Microsoft PowerPoint - AGA webinar July 2013 Final .pptx Microsoft PowerPoint - AGA webinar July 2013 Final .pptx Home Energy Score Program Overview for the American Gas ...

  6. Microsoft PowerPoint - FY11 budget rollout 2-1-10 final | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FY11 budget rollout 2-1-10 final Microsoft PowerPoint - FY11 budget rollout 2-1-10 final PDF icon Microsoft PowerPoint - FY11 budget rollout 2-1-10 final More Documents & ...

  7. Microsoft PowerPoint - 08 Lawrence 2010 DOE PM Workshop_EO13514...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Microsoft PowerPoint - 08 Lawrence 2010 DOE PM WorkshopEO 1351403-01-10presentation PDF icon Microsoft PowerPoint - 08 Lawrence 2010 DOE PM WorkshopEO 1351403-01-10presentati...

  8. Microsoft PowerPoint - 2009.10.27 Bridge Inspection Follow-up...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2009.10.27 Bridge Inspection Follow-up Microsoft PowerPoint - 2009.10.27 Bridge Inspection Follow-up Microsoft PowerPoint - 2009.10.27 Bridge Inspection Follow-up (832.41 KB) More ...

  9. SEMI-ANNUAL REPORTS FOR DOMINION COVE POINT, LP - DK. NO. 11...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOMINION COVE POINT, LP - DK. NO. 11-128-LNG - ORDER 3331 (Conditional Order) and Order 3331-A Final Order SEMI-ANNUAL REPORTS FOR DOMINION COVE POINT, LP - DK. NO. 11-128-LNG - ...

  10. Microsoft PowerPoint - 06 Crawley Drive for Net Zero Energy Commercial...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6 Crawley Drive for Net Zero Energy Commercial Buildings Microsoft PowerPoint - 06 Crawley Drive for Net Zero Energy Commercial Buildings Microsoft PowerPoint - 06 Crawley Drive ...

  11. Microsoft PowerPoint - 16.1045_Peer Reviews Panel_Lehman Workshop...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    045Peer Reviews PanelLehman Workshop Briefing w-headings Microsoft PowerPoint - 16.1045Peer Reviews PanelLehman Workshop Briefing w-headings PDF icon Microsoft PowerPoint - ...

  12. Microsoft PowerPoint - 15.1615_Cost Estimating Panel | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    615Cost Estimating Panel Microsoft PowerPoint - 15.1615Cost Estimating Panel PDF icon Microsoft PowerPoint - 15.1615Cost Estimating Panel More Documents & Publications ...

  13. Dominion Cove Point LNG, LP - FE Dkt. No 11-128-LNG | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Dominion Cove Point LNG, LP - FE Dkt. No 11-128-LNG Dominion Cove Point LNG, LP - FE Dkt. No 11-128-LNG ORDER CONDITIONALLY GRANTING LONG-TERM MULTI-CONTRACT AUTHORIZATION TO ...

  14. Apparatus for recovering gaseous hydrocarbons from hydrocarbon...

    Office of Scientific and Technical Information (OSTI)

    A method and apparatus are provided for producing gaseous hydrocarbons from formations comprising solid hydrocarbon hydrates located under either a body of land or a body of water. ...

  15. Apparatus for recovering gaseous hydrocarbons from hydrocarbon...

    Office of Scientific and Technical Information (OSTI)

    Authors: Elliott, Guy R. B. 1 ; Barraclough, Bruce L. 2 ; Vanderborgh, Nicholas E. 1 + Show Author Affiliations (Los Alamos, NM) (Santa Fe, NM) Publication Date: 1984-01-01 ...

  16. Method and apparatus for recovering unstable cores

    DOE Patents [OSTI]

    McGuire, Patrick L. (Los Alamos, NM); Barraclough, Bruce L. (Los Alamos, NM)

    1983-01-01

    A method and apparatus suitable for stabilizing hydrocarbon cores are given. Such stabilized cores have not previously been obtainable for laboratory study, and such study is believed to be required before the hydrate reserves can become a utilizable resource. The apparatus can be built using commercially available parts and is very simple and safe to operate.

  17. Microsoft Word - Changes-to-Schedules _Recovered_

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    at the end of each schedule for e-mail and word processing copies, which were added to the ... Models are non-records. 61407 17 11 Deleted electronic mail and word processing ...

  18. Measurement of Hydrogen Production Rate Based on Dew Point Temperatures: Independent Review

    SciTech Connect (OSTI)

    Duffy, M.; Harrison, K.; Sheahen, T.

    2007-11-01

    This independent review verified Idaho National Labotory's approach of measuring the rate of hydrogen production using dew point temperatures.

  19. Microsoft PowerPoint - 10 Lee LCLS Lessons Learned PM Workshop Final

    Office of Environmental Management (EM)

    [Compatibility Mode] | Department of Energy 0 Lee LCLS Lessons Learned PM Workshop Final [Compatibility Mode] Microsoft PowerPoint - 10 Lee LCLS Lessons Learned PM Workshop Final [Compatibility Mode] Microsoft PowerPoint - 10 Lee LCLS Lessons Learned PM Workshop Final [Compatibility Mode] (964.42 KB) More Documents & Publications LINAC Coherent Light Source Microsoft PowerPoint - 16.1045_Peer Reviews Panel_Lehman Workshop Briefing w-headings Microsoft PowerPoint - 09 Lehman final 1003 SC

  20. Energy Department Authorizes Dominion Cove Point LNG to Export Liquefied Natural Gas

    Broader source: Energy.gov [DOE]

    Press release announcing the authorization of Dominion Cove Point LNG in Calvert County, Maryland to export Liquefied Natural Gas.

  1. Points of Contact for FEOSH Program at Field Sites | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Points of Contact for FEOSH Program at Field Sites Points of Contact for FEOSH Program at Field Sites U.S. Department of Energy (DOE) Points of contact (POC) for Federal Employee Occupational Safety and Health (FEOSH) Points of Contact for FEOSH Program at Field Sites (61.62 KB) More Documents & Publications Technical Standards Managers Contact List FEOSH Brochure Fire Safety Committee Membership List Contact Carlos Coffman

  2. Microsoft PowerPoint - Saudi Arabia 2-22-10 final for distribution.pptx |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Saudi Arabia 2-22-10 final for distribution.pptx Microsoft PowerPoint - Saudi Arabia 2-22-10 final for distribution.pptx Microsoft PowerPoint - Saudi Arabia 2-22-10 final for distribution.pptx (3.54 MB) More Documents & Publications Microsoft PowerPoint - UAE Masdar 2-24

  3. Microsoft PowerPoint - UAE Masdar 2-24-10 final for distribution.pptx |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy UAE Masdar 2-24-10 final for distribution.pptx Microsoft PowerPoint - UAE Masdar 2-24-10 final for distribution.pptx Microsoft PowerPoint - UAE Masdar 2-24-10 final for distribution.pptx (4.87 MB) More Documents & Publications Microsoft PowerPoint - Saudi Arabia 2-22

  4. BP Cherry Point Cogeneration Project, Draft Environmental Impact Statement

    SciTech Connect (OSTI)

    N /A

    2003-09-19

    BP West Coast Products, LLC (BP or the Applicant) proposes to construct and operate a nominal 720-megawatt (MW), natural-gas-fired, combined-cycle cogeneration facility next to the existing BP Cherry Point Refinery in Whatcom County, Washington. The Applicant also owns and operates the refinery, but the cogeneration facility and the refinery would be operated as separate business units. The cogeneration facility and its ancillary infrastructure would provide steam and 85 MW of electricity to meet the operating needs of the refinery and 635 MW of electrical power for local and regional consumption. The proposed cogeneration facility would be located between Ferndale and Blaine in northwestern Whatcom County, Washington. The Canadian border is approximately 8 miles north of the proposed project site. The Washington State Energy Facility Site Evaluation Council (EFSEC) has jurisdiction over the evaluation of major energy facilities including the proposed project. As such, EFSEC will recommend approval or denial of the proposed cogeneration facility to the governor of Washington after an environmental review. On June 3, 2002, the Applicant filed an Application for Site Certification (ASC No. 2002-01) with EFSEC in accordance with Washington Administrative Code (WAC) 463-42. On April 22, 2003, the Applicant submitted an amended ASC that included, among other things, a change from air to water cooling. With the submission of the ASC and in accordance with the State Environmental Policy Act (SEPA) (WAC 463-47), EFSEC is evaluating the siting of the proposed project and conducting an environmental review with this Environmental Impact Statement (EIS). Because the proposed project requires federal agency approvals and permits, this EIS is intended to meet the requirements under both SEPA and the National Environmental Policy Act (NEPA). The Bonneville Power Administration (Bonneville) and U.S. Army Corps of Engineers (Corps) also will use this EIS as part of their

  5. Voltage control for a wind power plant based on the available reactive current of a DFIG and its impacts on the point of interconnection

    SciTech Connect (OSTI)

    Usman, Yasir; Kim, Jinho; Muljadi, Eduard; Kang, Yong Cheol

    2016-01-01

    Wake effects cause wind turbine generators (WTGs) within a wind power plant (WPP) to produce different levels of active power and subsequent reactive power capabilities. Further, the impedance between a WTG and the point of interconnection (POI)-which depends on the distance between them-impacts the WPP's reactive power injection capability at the POI. This paper proposes a voltage control scheme for a WPP based on the available reactive current of the doubly-fed induction generators (DFIGs) and its impacts on the POI to improve the reactive power injection capability of the WPP. In this paper, a design strategy for modifying the gain of DFIG controller is suggested and the comprehensive properties of these control gains are investigated. In the proposed scheme, the WPP controller, which operates in a voltage control mode, sends the command signal to the DFIGs based on the voltage difference at the POI. The DFIG controllers, which operate in a voltage control mode, employ a proportional controller with a limiter. The gain of the proportional controller is adjusted depending on the available reactive current of the DFIG and the series impedance between the DFIG and the POI. The performance of the proposed scheme is validated for various disturbances such as a reactive load connection and grid fault using an EMTP-RV simulator. Furthermore, simulation results demonstrate that the proposed scheme promptly recovers the POI voltage by injecting more reactive power after a disturbance than the conventional scheme.

  6. Voltage control for a wind power plant based on the available reactive current of a DFIG and its impacts on the point of interconnection

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Usman, Yasir; Kim, Jinho; Muljadi, Eduard; Kang, Yong Cheol

    2016-01-01

    Wake effects cause wind turbine generators (WTGs) within a wind power plant (WPP) to produce different levels of active power and subsequent reactive power capabilities. Further, the impedance between a WTG and the point of interconnection (POI)-which depends on the distance between them-impacts the WPP's reactive power injection capability at the POI. This paper proposes a voltage control scheme for a WPP based on the available reactive current of the doubly-fed induction generators (DFIGs) and its impacts on the POI to improve the reactive power injection capability of the WPP. In this paper, a design strategy for modifying the gainmore » of DFIG controller is suggested and the comprehensive properties of these control gains are investigated. In the proposed scheme, the WPP controller, which operates in a voltage control mode, sends the command signal to the DFIGs based on the voltage difference at the POI. The DFIG controllers, which operate in a voltage control mode, employ a proportional controller with a limiter. The gain of the proportional controller is adjusted depending on the available reactive current of the DFIG and the series impedance between the DFIG and the POI. The performance of the proposed scheme is validated for various disturbances such as a reactive load connection and grid fault using an EMTP-RV simulator. Furthermore, simulation results demonstrate that the proposed scheme promptly recovers the POI voltage by injecting more reactive power after a disturbance than the conventional scheme.« less

  7. Multi-input and binary reproducible, high bandwidth floating point adder in a collective network

    DOE Patents [OSTI]

    Chen, Dong; Eisley, Noel A; Heidelberger, Philip; Steinmacher-Burow, Burkhard

    2015-03-10

    To add floating point numbers in a parallel computing system, a collective logic device receives the floating point numbers from computing nodes. The collective logic devices converts the floating point numbers to integer numbers. The collective logic device adds the integer numbers and generating a summation of the integer numbers. The collective logic device converts the summation to a floating point number. The collective logic device performs the receiving, the converting the floating point numbers, the adding, the generating and the converting the summation in one pass. One pass indicates that the computing nodes send inputs only once to the collective logic device and receive outputs only once from the collective logic device.

  8. Microsoft PowerPoint - 16.1330_Rimando 110316 rev3 [Compatibility Mode] |

    Office of Environmental Management (EM)

    Department of Energy 16.1330_Rimando 110316 rev3 [Compatibility Mode] Microsoft PowerPoint - 16.1330_Rimando 110316 rev3 [Compatibility Mode] Microsoft PowerPoint - 16.1330_Rimando 110316 rev3 [Compatibility Mode] (8.01 MB) More Documents & Publications Microsoft PowerPoint - 01 Bosco PM Workshop BOSCO Feb22_2010PB final rcvd 5 Mar [Compatibility Mode] Microsoft PowerPoint - 16.0805_Tom Fox [Compatibility Mode] Microsoft PowerPoint - 15.1500_Michael Deane [Compatibility Mo

  9. Double-Precision Floating-Point Cores V1.9

    Energy Science and Technology Software Center (OSTI)

    2005-10-15

    In studying the acceleration of scientific computing applications with reconfigurable hardware, such as field programmable gate arrays, one finds that many scientific applications require high-precision, floating-point arithmetic that is not innately supported in reconfigurable hardware. Consequently, we have written VDL code that describes hardware for performing double-precision (64-bit) floating-point arithmetic. From this code, it is possible for users to implement double-precision floating-point operations on FPGAs or any other hardware device to which VHDL code canmore » be synthesized. Specifically, we have written code for four floating-point cores. Each core performs one operation: one performs addition/subtraction, one performs multiplication, one performs division, and one performs square root. The code includes parameters that determine the features of the floating-point cores, such as what types of floating-point numbers are supported and what roudning modes are supported. These parameters influence the frequency achievable by the designs as well as the chip area required for the designs. The parameters are chosen so that the floating-point cores have varyinig amounts of compliance with the industry standard for floating-point cores have varying amounts of compliance with the industry standard for floating-point arithmetic, IEEE standard 754. There is an additional parameter that determines the number of pipelining stages in the floating-point cores.« less

  10. One-parameter semigroups of analytic functions, fixed points and the Koenigs function

    SciTech Connect (OSTI)

    Goryainov, Victor V; Kudryavtseva, Olga S

    2011-07-31

    Analogues of the Berkson-Porta formula for the infinitesimal generator of a one-parameter semigroup of holomorphic maps of the unit disc into itself are obtained in the case when, along with a Denjoy-Wolff point, there also exist other fixed points. With each one-parameter semigroup a so-called Koenigs function is associated, which is a solution, common for all elements of the one-parameter semigroup, of a certain functional equation (Schroeder's equation in the case of an interior Denjoy-Wolff point and Abel's equation in the case of a boundary Denjoy-Wolff point). A parametric representation for classes of Koenigs functions that takes account of the Denjoy-Wolff point and other fixed points of the maps in the one-parameter semigroup is presented. Bibliography: 19 titles.

  11. Microsoft PowerPoint - 06 Crawley Drive for Net Zero Energy Commercial

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Buildings | Department of Energy 06 Crawley Drive for Net Zero Energy Commercial Buildings Microsoft PowerPoint - 06 Crawley Drive for Net Zero Energy Commercial Buildings Microsoft PowerPoint - 06 Crawley Drive for Net Zero Energy Commercial Buildings (1.5 MB) More Documents & Publications Microsoft PowerPoint - 06 Crawley Drive for Net Zero Energy Commercial Buildings Aspinall Courthouse: GSA's Historic Preservation and Net-Zero Renovation A Common Definition for Zero Energy Buildings

  12. High Temperature Gas-Cooled Test Reactor Point Design: Summary Report

    SciTech Connect (OSTI)

    Sterbentz, James William; Bayless, Paul David; Nelson, Lee Orville; Gougar, Hans David; Strydom, Gerhard

    2016-01-01

    A point design has been developed for a 200-MW high-temperature gas-cooled test reactor. The point design concept uses standard prismatic blocks and 15.5% enriched uranium oxycarbide fuel. Reactor physics and thermal-hydraulics simulations have been performed to characterize the capabilities of the design. In addition to the technical data, overviews are provided on the technology readiness level, licensing approach, and costs of the test reactor point design.

  13. EA-1967: Hills Creek-Lookout Point Transmission Line Rebuild Project; Lane

    Energy Savers [EERE]

    County, Oregon | Department of Energy 1967: Hills Creek-Lookout Point Transmission Line Rebuild Project; Lane County, Oregon EA-1967: Hills Creek-Lookout Point Transmission Line Rebuild Project; Lane County, Oregon Summary Bonneville Power Administration is preparing an EA to assess potential environmental impacts of the proposed rebuild of its 26-mile 115-kilovolt (kV) wood-pole Hills Creek-Lookout Point transmission line, which is generally located between Lowell and Oakridge, in Lane

  14. Microsoft PowerPoint - Chien-Salishan4-27-2010v11

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    o Superscalar (Power), Floating Point (...happened along the way) * uOps (dynamic translation) (Intel PPro) o Mmedia extensions (variable precision, vector) (Dec, Intel) o...

  15. 300 AREA PACIFIC NORTHWEST NATIONAL LABORATORY FACILITY RADIONUCLIDE EMISSION POINTS AND SAMPLING SYSTEMS

    SciTech Connect (OSTI)

    Barfuss, Brad C.; Barnett, J. M.; Harbinson, L Jill

    2006-08-28

    Radionuclide emission points for 300 Area and Battelle Private facilities are presented herein. The sampling systems and associated emission specifics are detailed.

  16. Floating point only SIMD instruction set architecture including compare, select, Boolean, and alignment operations

    DOE Patents [OSTI]

    Gschwind, Michael K.

    2011-03-01

    Mechanisms for implementing a floating point only single instruction multiple data instruction set architecture are provided. A processor is provided that comprises an issue unit, an execution unit coupled to the issue unit, and a vector register file coupled to the execution unit. The execution unit has logic that implements a floating point (FP) only single instruction multiple data (SIMD) instruction set architecture (ISA). The floating point vector registers of the vector register file store both scalar and floating point values as vectors having a plurality of vector elements. The processor may be part of a data processing system.

  17. Effects of Point Defects and Impurities on Kinetics in NaAlH4 | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Point Defects and Impurities on Kinetics in NaAlH4 Effects of Point Defects and Impurities on Kinetics in NaAlH4 A presentation showing that point defects play an important role in the kinetics of NaAlH4 including vacancies and interstitials consistent with observed effects of Ti. effects_of_point_defects.pdf (503.7 KB) More Documents & Publications Catalytic Effect of Ti for Hydrogen Cycling in NaAlH4 FTA - SunLine Transit Agency - Final Report Proceedings of the 1998 U.S. DOE

  18. Microsoft PowerPoint - SNLResilienceApril29 [Read-Only

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    metrics for Oil, Gas, and Electricity Review plausible use-cases for electricity resilience metrics Collaboratively outline next steps 4 Takeaway Points - R&D is needed to ...

  19. Methodological demonstration of laser beam pointing control for space gravitational wave detection missions

    SciTech Connect (OSTI)

    Dong, Yu-Hui; Liu, He-Shan; Luo, Zi-Ren; Li, Yu-Qiong; Jin, Gang

    2014-07-15

    In space laser interferometer gravitational wave (G.W.) detection missions, the stability of the laser beam pointing direction has to be kept at 10 nrad/√Hz. Otherwise, the beam pointing jitter noise will dominate the noise budget and make the detection of G.W. impossible. Disturbed by the residue non-conservative forces, the fluctuation of the laser beam pointing direction could be a few μrad/√Hz at frequencies from 0.1 mHz to 10 Hz. Therefore, the laser beam pointing control system is an essential requirement for those space G.W. detection missions. An on-ground test of such beam pointing control system is performed, where the Differential Wave-front Sensing technique is used to sense the beams pointing jitter. An active controlled steering mirror is employed to adjust the beam pointing direction to compensate the jitter. The experimental result shows that the pointing control system can be used for very large dynamic range up to 5 μrad. At the interested frequencies of space G.W. detection missions, between 1 mHz and 1 Hz, beam pointing stability of 6 nrad/√Hz is achieved.

  20. CenterPoint Energy (Gas)- Residential Heating and Hot Water Rebates

    Office of Energy Efficiency and Renewable Energy (EERE)

    CenterPoint Energy offers gas heating and water heating equipment rebates to its residential customers. Eligible equipment includes furnaces, back-up furnace systems, hydronic heaters, storage...