National Library of Energy BETA

Sample records for rear wheel drive

  1. Vibrotactile Feedback in Steering Wheel Reduces Navigation Errors during GPS-Guided Car Driving

    E-Print Network [OSTI]

    Basdogan, Cagatay

    Vibrotactile Feedback in Steering Wheel Reduces Navigation Errors during GPS-Guided Car Driving feedback displayed through the steering wheel of a car can reduce the perceptual and cognitive load with the GPS-based voice commands. KEYWORDS: vibrotactile, haptics, car navigation systems, GPS, steering wheel

  2. In-line drivetrain and four wheel drive work machine using same

    DOE Patents [OSTI]

    Hoff, Brian (East Peoria, IL)

    2008-08-05

    A four wheel drive articulated mine loader is powered by a fuel cell and propelled by a single electric motor. The drivetrain has the first axle, second axle, and motor arranged in series on the work machine chassis. Torque is carried from the electric motor to the back differential via a pinion meshed with the ring gear of the back differential. A second pinion oriented in an opposite direction away from the ring gear is coupled to a drive shaft to transfer torque from the ring gear to the differential of the front axle. Thus, the ring gear of the back differential acts both to receive torque from the motor and to transfer torque to the forward axle. The in-line drive configuration includes a single electric motor and a single reduction gear to power the four wheel drive mine loader.

  3. Design of a triple singularity drive for mobile wheeled robots

    E-Print Network [OSTI]

    Carothers, Jeffrey (Jeffrey W.)

    2014-01-01

    This thesis encompasses the development of a mobile robotic platform using three singularity drive modules. The process begins with a review of other omnidirectional platforms, comparing and contrasting their strengths and ...

  4. The calm before the storm. [Retail wheeling

    SciTech Connect (OSTI)

    Studness, C.M.

    1993-05-15

    The right to refuse retail wheeling requests is one of the cornerstones of a utility's monopoly power. Utilities have fought staunchly to preserve it, most recently in preventing retail wheeling from becoming an important issue in the congressional debate over deregulation; the Energy Policy Act of 1992 steered clear of it. For the present, the prohibition of retail wheeling gives utilities enormous power over the retail electric power market. The ability to refuse retail wheeling requests, of course, prevents retail customers from buying power from third parties. This enables a utility to sell retail customers all the power it can generate, at a price that covers its cost plus an allowed return-even if its price exceeds that of power available in the wholesale market. The denial of retail wheeling thus protects a utility's inefficiencies, whose price is ultimately shouldered onto customers through cost-plus electric rates. Allowing retail wheeling would remove the foundation for much of the current monopoly power that utilities enjoy. Third parties could sell power to a utility's retail customers, since the utility would be required to wheel it. Retail customers would be able to bypass the local distribution utility to buy power from the cheapest source available. Market forces would drive pricing rather than the cost-plus ratemaking process. A utility whose electric rates were above market would have to meet the competitive price or lose sales.

  5. Gears and belt drives for non-uniform transmission

    E-Print Network [OSTI]

    Nawratil, Georg

    Gears and belt drives for non-uniform transmission Hellmuth Stachel stachel of gearing 2. Non-uniform belt drives 3. On the existence of strict non-uniform belt drives EUCOMES08. Finsterwalder's principle of gearing The driving wheel 1 rotates about O1 through 1, the out-put wheel 2 rotates

  6. Ultrasonic search wheel probe

    DOE Patents [OSTI]

    Mikesell, Charles R. (Idaho Falls, ID)

    1978-01-01

    A device is provided for reducing internal reflections from the tire of an ultrasonic search wheel probe or from within the material being examined. The device includes a liner with an anechoic chamber within which is an ultrasonic transducer. The liner is positioned within the wheel and includes an aperture through which the ultrasonic sound from the transducer is directed.

  7. Grinding Wheel System

    DOE Patents [OSTI]

    Malkin, Stephen (Amherst, MA); Gao, Robert (Amherst, MA); Guo, Changsheng (South Windsor, CT); Varghese, Biju (Worthington, OH); Pathare, Sumukh (Waltham, MA)

    2006-01-10

    A grinding wheel system includes a grinding wheel with at least one embedded sensor. The system also includes an adapter disk containing electronics that process signals produced by each embedded sensor and that transmits sensor information to a data processing platform for further processing of the transmitted information.

  8. Grinding Wheel System

    DOE Patents [OSTI]

    Malkin, Stephen (Amherst, MA); Gao, Robert (Amherst, MA); Guo, Changsheng (South Windsor, CT); Varghese, Biju (Worthington, OH); Pathare, Sumukh (Waltham, MA)

    2003-08-05

    A grinding wheel system includes a grinding wheel with at least one embedded sensor. The system also includes an adapter disk containing electronics that process signals produced by each embedded sensor and that transmits sensor information to a data processing platform for further processing of the transmitted information.

  9. Wheeled hopping robot

    DOE Patents [OSTI]

    Fischer, Gary J. (Albuquerque, NM)

    2010-08-17

    The present invention provides robotic vehicles having wheeled and hopping mobilities that are capable of traversing (e.g. by hopping over) obstacles that are large in size relative to the robot and, are capable of operation in unpredictable terrain over long range. The present invention further provides combustion powered linear actuators, which can include latching mechanisms to facilitate pressurized fueling of the actuators, as can be used to provide wheeled vehicles with a hopping mobility.

  10. Just build it! : a fully functional concept vehicle using robotic wheels

    E-Print Network [OSTI]

    Schmitt, Peter, S.M. Massachusetts Institute of Technology

    2007-01-01

    Interest in electric vehicle drive units is resurging with the proliferation of hybrid and electric vehicles. Currently emerging key-technologies are: in-wheel motors, electric braking, integrated steering activators and ...

  11. Automatic Mechetronic Wheel Light Device

    DOE Patents [OSTI]

    Khan, Mohammed John Fitzgerald (Silver Spring, MD)

    2004-09-14

    A wheel lighting device for illuminating a wheel of a vehicle to increase safety and enhance aesthetics. The device produces the appearance of a "ring of light" on a vehicle's wheels as the vehicle moves. The "ring of light" can automatically change in color and/or brightness according to a vehicle's speed, acceleration, jerk, selection of transmission gears, and/or engine speed. The device provides auxiliary indicator lights by producing light in conjunction with a vehicle's turn signals, hazard lights, alarm systems, and etc. The device comprises a combination of mechanical and electronic components and can be placed on the outer or inner surface of a wheel or made integral to a wheel or wheel cover. The device can be configured for all vehicle types, and is electrically powered by a vehicle's electrical system and/or battery.

  12. The design, construction, and control of a wheeled robot vehicle 

    E-Print Network [OSTI]

    Ekiriwang, Tevo

    1986-01-01

    32 tooth gear 16 tooth gear 1/2 inch shaft 1/2 inch coupling 12 inch wheel drive box quantity 2 2 4 4 4 2 2 2 1 O / pt ~ k Figure 2. 7 Drive unit 20 Table 2. 2 huput voltage and output RPM for motors 1 and 2 output.... And finally, my thanks to nry parents for their love and support. TABLE OF CONTENTS CHAPTER Page I INTRODUCTION 1. 1 Mobile Robots 1. 2 Modularity 1. 3 Proposal 1. 4 Research Procedure H ELECTRIC VEHICLE 13 2. 1 Base 2. 2 Drive Unit, 2. 3 Processing...

  13. Wheel-type magnetic refrigerator

    DOE Patents [OSTI]

    Barclay, J.A.

    1982-01-20

    The disclosure is directed to a wheel-type magnetic refrigerator capable of cooling over a large temperature range. Ferromagnetic or paramagnetic porous materials are layered circumferentially according to their Curie temperature. The innermost layer has the lowest Curie temperature and the outermost layer has the highest Curie temperature. The wheel is rotated through a magnetic field perpendicular to the axis of the wheel and parallel to its direction of rotation. A fluid is pumped through portions of the layers using inner and outer manifolds to achieve refrigeration of a thermal load.

  14. Wheel-type magnetic refrigerator

    DOE Patents [OSTI]

    Barclay, J.A.

    1983-10-11

    The disclosure is directed to a wheel-type magnetic refrigerator capable of cooling over a large temperature range. Ferromagnetic or paramagnetic porous materials are layered circumferentially according to their Curie temperature. The innermost layer has the lowest Curie temperature and the outermost layer has the highest Curie temperature. The wheel is rotated through a magnetic field perpendicular to the axis of the wheel and parallel to its direction of rotation. A fluid is pumped through portions of the layers using inner and outer manifolds to achieve refrigeration of a thermal load. 7 figs.

  15. Rim seal for turbine wheel

    DOE Patents [OSTI]

    Glezer, Boris (Del Mar, CA); Boyd, Gary L. (Alpine, CA); Norton, Paul F. (San Diego, CA)

    1996-01-01

    A turbine wheel assembly includes a disk having a plurality of blades therearound. A ceramic ring is mounted to the housing of the turbine wheel assembly. A labyrinth rim seal mounted on the disk cooperates with the ceramic ring to seal the hot gases acting on the blades from the disk. The ceramic ring permits a tighter clearance between the labyrinth rim seal and the ceramic ring.

  16. Use of an auditory signal in a rear-end collision warning system: effects on braking force and reaction time 

    E-Print Network [OSTI]

    Hopkins, Jennifer Susan

    1995-01-01

    This simulator experiment is a preliminary study examining the effects of different auditory signals on braking force and reaction time in a rear-end collision warning system. A driving simulator was built in which subjects operated a computer...

  17. Qualifying Facility Wheeling Task Force-- Status Report 

    E-Print Network [OSTI]

    Panjavan, S.

    1989-01-01

    Docket No. 8650 that the PUCT review the applicability of certain parts of the wheeling rules, and in April the Commission appointed a task force composed of representatives from affected industries, utilities, and regulatory staff to review the wheeling...

  18. Energy Upgrade California Drives Demand From Behind the Wheel...

    Broader source: Energy.gov (indexed) [DOE]

    trailer with the Energy Upgrade California logo and graphics painted on the side. With a goal of "energy efficiency or bust," the California Center for Sustainable Energy (CCSE)...

  19. Energy Upgrade California Drives Demand From Behind the Wheel | Department

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n cEnergyNatural GasDepartment of EnergyJanuary 26, 2012 Theof

  20. Aerodynamic Drag Reduction Apparatus For Wheeled Vehicles In Ground Effect

    DOE Patents [OSTI]

    Ortega, Jason M. (Pacifica, CA); Salari, Kambiz (Livermore, CA)

    2005-12-13

    An apparatus for reducing the aerodynamic drag of a wheeled vehicle in a flowstream, the vehicle having a vehicle body and a wheel assembly supporting the vehicle body. The apparatus includes a baffle assembly adapted to be positioned upstream of the wheel assembly for deflecting airflow away from the wheel assembly so as to reduce the incident pressure on the wheel assembly.

  1. Retail wheeling: Is this revolution necessary?

    SciTech Connect (OSTI)

    Cudahy, R.D.

    1994-12-31

    As of a former state regulator and a once enthusiastic practitioner of public utility law, I find it fascinating to see the latest nostrum to burst on the electric utility scene: retail wheeling. Wheeling became a personal interest in the Texas interconnection fight of the late seventies and may have led to the interconnection and wheeling provision of the Public Utilities Regulatory Policies Act (PURPA). Retail wheeling contemplates that every electric power customer should be given an opportunity to seek out the lowest cost source of power wherever it can be found. As a practical matter, the drums for retail wheeling are presently being beaten by large industrial users, who believe that they have the capability to find low cost sources and to make advantageous commercial arrangements to acquire electricity. Large industrials have long been fighting the utilities for cheaper electricity, frequently using the threat of self-generation and cogeneration.

  2. Traction drive automatic transmission for gas turbine engine driveline

    DOE Patents [OSTI]

    Carriere, Donald L. (Livonia, MI)

    1984-01-01

    A transaxle driveline for a wheeled vehicle has a high speed turbine engine and a torque splitting gearset that includes a traction drive unit and a torque converter on a common axis transversely arranged with respect to the longitudinal centerline of the vehicle. The drive wheels of the vehicle are mounted on a shaft parallel to the turbine shaft and carry a final drive gearset for driving the axle shafts. A second embodiment of the final drive gearing produces an overdrive ratio between the output of the first gearset and the axle shafts. A continuously variable range of speed ratios is produced by varying the position of the drive rollers of the traction unit. After starting the vehicle from rest, the transmission is set for operation in the high speed range by engaging a first lockup clutch that joins the torque converter impeller to the turbine for operation as a hydraulic coupling.

  3. CONVERVATION OF ANGULAR MOMENTUM A rotating bicycle wheel has angular

    E-Print Network [OSTI]

    CONVERVATION OF ANGULAR MOMENTUM A rotating bicycle wheel has angular momentum, which is a property of a bicycle wheel's mass is concentrated along the wheel's rim, rather than at the center, and this causes. The bicycle wheel, you, and the chair comprise a system that obeys the principle of conservation of angular

  4. SHARED CONTROL BETWEEN HUMAN AND MACHINE: USING A HAPTIC STEERING WHEEL TO AID IN LAND VEHICLE GUIDANCE

    E-Print Network [OSTI]

    Gillespie, Brent

    signals or information, while solid lines represent power exchange). As a supervisor, the human makes. Thus, both the human and controller exchange power with the control interface, which in turn drivesSHARED CONTROL BETWEEN HUMAN AND MACHINE: USING A HAPTIC STEERING WHEEL TO AID IN LAND VEHICLE

  5. Minimizing Wheel Slip in Railway Locomotives with Coupled Permanent Magnet Synchronous Motors

    E-Print Network [OSTI]

    Shayak Bhattacharjee

    2015-01-17

    In this work I consider control strategies of permanent magnet synchronous motors in which the back-emf signal from the motor is used to achieve commutation of the six step driving circuit. I show that if the strategy is modified to connect multiple motors in a cyclic chain, then a collective synchronized state is favoured. The stability of this state can be exploited in the bogies of a railway locomotive to automatically terminate wheel slipping episodes.

  6. Design and control of multimodal single-legged vehicles with variable geometry reaction wheel arrays

    E-Print Network [OSTI]

    Schmidt-Wetekam, Christopher

    2011-01-01

    position, x, and the reaction wheel velocity, ?. for thisnot measured; the reaction wheel velocity is estimated basedaccelerometer. The reaction wheel position and velocity are

  7. Laboratory rearing of the cottonwood twig borer on artificial diets 

    E-Print Network [OSTI]

    Mastro, Victory Carl

    1973-01-01

    several advantages over rearing them on their natural food such as: (1) simplification of the maintenance of an insect colony; (2) a capability to rear insects during the dormant season; (3) reduction in contamination from natural food; (4) production...) has successfully reared the cottonwood twig borer on its natural food. The purpose of this thesis is to describe attempts to rear the insect on artificial diets and develop a rearing technique for handling various stages of the insect. The research...

  8. Reconfigurable wheels : re-inventing the wheel for the next generation of planetary rovers

    E-Print Network [OSTI]

    Baker, Brittany, S.M. Massachusetts Institute of Technology

    2012-01-01

    Experiences with Spirit and Opportunity, the twin Mars Exploration Rovers, showed that one of the major issues that needs to be addressed in order to expand the exploration capabilities of planetary rovers is that of wheel ...

  9. Paper Number Development of a Hydro-Mechanical Hydraulic Hybrid Drive

    E-Print Network [OSTI]

    Van de Ven, James D.

    Paper Number Development of a Hydro-Mechanical Hydraulic Hybrid Drive Train with Independent Wheel of a passenger car. The developed hydro-mechanical drive train enables independent control of the torque at each for the Center for Compact and Efficient Fluid Power at the University of Minnesota. The hydro-mechanical hybrid

  10. Bradbury Science Museum - Science on Wheels

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room News PublicationsAudits &Bradbury Science Museum - Science on Wheels Our Mission: To

  11. DRIVING DIRECTIONS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent Bonding Low-Cost2 DOE HQSiteo n n eDPFJ.D.DRIVING DIRECTIONS

  12. The design process for wheel-robot integration

    E-Print Network [OSTI]

    Carvajal, Michael Angelo

    2009-01-01

    In this thesis, the design process for wheel-robot integration was documented and reflected on. The project focused on redesigned certain aspects a half-scale wheel-robot to be integrated with a half-scale CityCar prototype ...

  13. Catalog of Waters Important for the Spawning, Rearing or Migration...

    Open Energy Info (EERE)

    Spawning, Rearing or Migration of Anadromous Fishes Organization Alaska Department of Fish and Game Published Divisions of Sport Fish and Habitat, 2012 Report Number 12-05 DOI...

  14. Winter Driving Tips Driving in Ice & Snow

    E-Print Network [OSTI]

    Capogna, Luca

    Winter Driving Tips Driving in Ice & Snow: When you must drive, clear the ice and snow from your in ice and snow, other drivers will be traveling cautiously. Don't disrupt the flow of traffic by driving handle better in ice and snow, but they do not have flawless traction, and skids can occur unexpectedly

  15. Engineering AnteaterDrive

    E-Print Network [OSTI]

    Markopoulou, Athina

    Rockw ell & M DEA Engineering Tower AnteaterDrive AnteaterDrive East Peltason Drive EastPeltasonDrive East Peltason Drive Anteater Parking Structure EngineeringServiceRoad Engineering Laboratory Facility Engineering Gateway Engineering Hall AIRB Calit2 Engineering Lecture Hall Campus Building Engineering Building

  16. FULL FUEL CYCLE ASSESSMENT TANK TO WHEELS EMISSIONS

    E-Print Network [OSTI]

    FULL FUEL CYCLE ASSESSMENT TANK TO WHEELS EMISSIONS AND ENERGY CONSUMPTION Prepared For: California emission projections for the years 2012, 2017, 2022, and 2030 KEYWORDS Full Fuel Cycle Analysis, Well

  17. The great ``retail wheeling`` illusion, and more productive energy futures

    SciTech Connect (OSTI)

    Cavanagh, R.

    1994-12-31

    This paper sets out the reasons why many environmental and public interest organizations oppose retail wheeling. Cavanagh argues that retail wheeling would destroy incentives for energy efficiency improvements and renewable energy generation--benefits that reduce long-term energy service costs to society as a whole. The current debate over the competitive restructuring of the electric power industry is critical from both economic and environmental perspectives. All attempts to introduce broad-scale retail wheeling in the United States have failed; instead, state regulators are choosing a path that emphasizes competition and choice, but acknowledges fundamental differences between wholesale and retail markets. Given the physical laws governing the movement of power over centrally controlled grids, the choice offered to customers through retail wheeling of electricity is a fiction -- a re-allocation of costs is all that is really possible. Everyone wants to be able to claim the cheapest electricity on the system; unfortunately, there is not enough to go around. By endorsing the fiction of retail wheeling for certain types of customers, regulators would be recasting the retail electricity business as a kind of commodity exchange. That would reward suppliers who could minimize near-term unit costs of electricity while simultaneously destroying incentives for many investments, including cost-effective energy efficiency improvements and renewable energy generation, that reduce long-term energy service costs to society as a whole. This result, which has been analogized unpersuasively to trends in telecommunications and natural gas regulation, is neither desirable nor inevitable. States should go on saying no to retail wheeling in order to be able to create something better: regulatory reforms that align utility and societal interests in pursuing a least-cost energy future. An appendix contains notes on some recent Retail Wheeling Campaigns.

  18. EA-1111: K Pool Fish Rearing, Hanford Site, Richland, Washington

    Office of Energy Efficiency and Renewable Energy (EERE)

    This EA evaluates the environmental impacts of the proposal to enter into a use permit or lease agreement with the Yakama Indian Nation or other parties who would rear fish in the 100-K Area Pools.

  19. Energy options: Cogen V and retail wheeling alternatives technical conference

    SciTech Connect (OSTI)

    1996-12-31

    The Energy Options technical conference proceedings contains 265 papers, of which 17 were selected for the database. The conference was split into two primary topics: cogeneration and retail wheeling. Subtopics under cogeneration included: the state of cogeneration in the United States, case studies in facility ownership, fuels considerations for tomorrow, and plant design considerations for cogeneration systems. Retail wheeling alternatives subtopics included U.S. Federal Energy Regulatory Commission rulings, end-user options for retail wheeling, deregulation issues, and forecasting of electricity generating costs. Papers not selected for the database, while clearly pertinent topics of interest, consisted of viewgraphs which were judged not to have sufficient technical information and coherence without the corresponding presentation. However, some papers which did consist of viewgraphs were included.

  20. SW CAMPUS DRIVE SW CAMPUS DRIVE

    E-Print Network [OSTI]

    Chapman, Michael S.

    SW CAMPUS DRIVE SW VETERANS HOSPITAL ROAD SW GAINES ROAD SW 6THAVENUE SW CAMPUS DRIVE SW SAM JACKSON ROAD SW SAM JACKSON ROAD SW SAM J ACKSONROAD SW TERWILLIGER BOULEVARD SW6THAVE SW 11TH AVE SW VETERAN S H O SPITAL ROAD SW TERWILLIGERBLVD SW T ERWILLIGER B LVD SW V ETERANS HOSPITAL ROAD P V V E V V

  1. Well-to-Wheels Greenhouse Gas Emissions of Canadian Oil Sands...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Well-to-Wheels Greenhouse Gas Emissions of Canadian Oil Sands Products: Implications for U.S. Petroleum Fuels Title Well-to-Wheels Greenhouse Gas Emissions of Canadian Oil Sands...

  2. Well-to-Wheels Energy Use and Greenhouse Gas Emissions of Plug...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Well-to-Wheels Energy Use and Greenhouse Gas Emissions of Plug-In Hybrid Electric Vehicles Well-to-Wheels Energy Use and Greenhouse Gas Emissions of Plug-In Hybrid Electric...

  3. Simulation and optimization of a two-wheeled, ball- flinging robot

    E-Print Network [OSTI]

    Chen, Po-Ting

    2010-01-01

    Wheeled, Ball-Flinging Robot A thesis submitted in partiala Two-Wheeled, Ball-Flinging Robot by Po-Ting Chen Master ofremote controlled robot. The robot is maneuverable and

  4. A Miniature Hybrid Robot Propelled by Legs Matthew C. Birch, Roger D. Quinn, Geon Hahm, Stephen M. Phillips, Barry Drennan, Randall D. Beer, Xinyu Yu, Steven

    E-Print Network [OSTI]

    . The hybrid robot uses its legs as the drive mechanism and its passive wheels have a large diameter to help behavior of the house cricket, Acheta domesticus. The cricket has large and powerful rear legs that enable

  5. Paths of Trains with Two-Wheeled Cars Luis Montejano

    E-Print Network [OSTI]

    Urrutia, Jorge

    Paths of Trains with Two-Wheeled Cars Luis Montejano , and Jorge Urrutia June 17, 2004 Abstract In this paper we study the following simple and mind-puzzling prob- lem: Can a model train car, which runs along closed curve, and the cars of our model train by segments whose end-points lie on the curve. 1

  6. Hydrodynamic Tesla Wheel Flume for Model and Prototype Testing

    E-Print Network [OSTI]

    Wood, Stephen L.

    The Tesla turbine, U.S. Patent 1,061,206 -- May 6, 1913 was invented by Nikola Tesla as a means to extractHydrodynamic Tesla Wheel Flume for Model and Prototype Testing Spencer Jenkins, Chris Scott, Jacob Engineering department at Florida Institute of Technology (Florida Tech) has developed a Hydrodynamic Tesla

  7. FULL FUEL CYCLE ASSESSMENT WELL TO WHEELS ENERGY INPUTS,

    E-Print Network [OSTI]

    FULL FUEL CYCLE ASSESSMENT WELL TO WHEELS ENERGY INPUTS, EMISSIONS, AND WATER IMPACTS Preparation on a full fuel cycle basis for alternative-fueled vehicles is important when assessing the overall production are a significant portion of the total GHG emissions attributable to the full fuel cycle. Also

  8. FULL FUEL CYCLE ASSESSMENT: WELL-TO-WHEELS ENERGY INPUTS,

    E-Print Network [OSTI]

    FULL FUEL CYCLE ASSESSMENT: WELL-TO-WHEELS ENERGY INPUTS, EMISSIONS, AND WATER IMPACTS STATE PLAN Waterland Stefan Unnasch FULL FUEL CYCLE ANALYSIS PEER REVIEWERS Argonne National Laboratory Michael Wang organizations were given an opportunity to review and comment on the AB 1007 full fuel cycle analysis. Comments

  9. Bridging Research to Implementation, from Fields to Wheels

    E-Print Network [OSTI]

    Lee, Dongwon

    IOENERG Bridging Research to Implementation, from Fields to Wheels BioEnergy Bridge BioEnergy BridgeTM The Penn State BioEnergy BridgeTM is a university/private/public consortium assembled to address development and engine testing· The BioEnergy Bridge will combine Penn State's long-standing tradition

  10. By moving the front wheels in and back wheels out, the rover can

    E-Print Network [OSTI]

    Withers, Paul

    . Solar arrays Provide power for driving the rover, operating the science instruments, heating resolution is more than three times more powerful than previous rovers'. Images will help select rock. The images provided the sci- entists with their first glimpse of their home away from home -- an area

  11. Experiments with a Malkus-Lorenz water wheel: Chaos and Synchronization

    E-Print Network [OSTI]

    Lucas Illing; Rachel F. Fordyce; Alison M. Saunders; Robert Ormond

    2012-02-24

    We describe a simple experimental implementation of the Malkus-Lorenz water wheel. We demonstrate that both chaotic and periodic behavior is found as wheel parameters are changed in agreement with predictions from the Lorenz model. We furthermore show that when the measured angular velocity of our water wheel is used as an input signal to a computer model implementing the Lorenz equations, high quality chaos synchronization of the model and the water wheel is achieved. This indicates that the Lorenz equations provide a good description of the water wheel dynamics.

  12. Innovative grinding wheel design for cost-effective machining of advanced ceramics. Phase I, final report

    SciTech Connect (OSTI)

    Licht, R.H.; Ramanath, S.; Simpson, M.; Lilley, E.

    1996-02-01

    Norton Company successfully completed the 16-month Phase I technical effort to define requirements, design, develop, and evaluate a next-generation grinding wheel for cost-effective cylindrical grinding of advanced ceramics. This program was a cooperative effort involving three Norton groups representing a superabrasive grinding wheel manufacturer, a diamond film manufacturing division and a ceramic research center. The program was divided into two technical tasks, Task 1, Analysis of Required Grinding Wheel Characteristics, and Task 2, Design and Prototype Development. In Task 1 we performed a parallel path approach with Superabrasive metal-bond development and the higher technical risk, CVD diamond wheel development. For the Superabrasive approach, Task 1 included bond wear and strength tests to engineer bond-wear characteristics. This task culminated in a small-wheel screening test plunge grinding sialon disks. In Task 2, an improved Superabrasive metal-bond specification for low-cost machining of ceramics in external cylindrical grinding mode was identified. The experimental wheel successfully ground three types of advanced ceramics without the need for wheel dressing. The spindle power consumed by this wheel during test grinding of NC-520 sialon is as much as to 30% lower compared to a standard resin bonded wheel with 100 diamond concentration. The wheel wear with this improved metal bond was an order of magnitude lower than the resin-bonded wheel, which would significantly reduce ceramic grinding costs through fewer wheel changes for retruing and replacements. Evaluation of ceramic specimens from both Tasks 1 and 2 tests for all three ceramic materials did not show evidence of unusual grinding damage. The novel CVD-diamond-wheel approach was incorporated in this program as part of Task 1. The important factors affecting the grinding performance of diamond wheels made by CVD coating preforms were determined.

  13. Labelling Wheels for Minimum Sum Number Mirka MILLER Joseph RYAN

    E-Print Network [OSTI]

    Smyth, William F.

    and Smyth showed that for wheels W n of order n+1 and size m = 2n, oe(W n ) 2 \\Theta(m); that is these results to show that for even n â?? 4, oe(W n ) = n=2 + 2, while for odd n â?? 5 we disprove a conjecture of Hartsfield and Smyth by showing that oe(W n ) = n. Labellings are given that achieve these minima. 1

  14. The Read Out Controller for the ATLAS New Small Wheel

    E-Print Network [OSTI]

    Coliban, Radu Mihai; The ATLAS collaboration; Tulbure, Traian Tiberiu; Ivanovici, Mihail; Martoiu, Victor Sorin; Levinson, Lorne; Vermeulen, Jos

    2015-01-01

    In the upgrade process of the ATLAS detector, the innermost stations of the endcaps (Small Wheels, SW) will be replaced. The New Small Wheel (NSW) will have two chamber technologies, one for the Level-1 trigger function (small-strip Thin Gap Chambers, sTGC) and one primarily dedicated to precision tracking (Micromegas detectors, MM). Custom front-end Application Specific Integrated Circuits (ASICs) will be used to read and filter information from both the sTGC and MM detectors. In the context of the New Small Wheel data path, we designed the Read Out Controller (ROC) ASIC for handling, preprocessing and formatting the data generated by the NSW VMM upstream chips. The ROC will concentrate the data streams from 8 VMMs, filter data based on the BCID and transmit the data to FELIX via the L1DDC. ROC is composed of 8 VMM Capture modules, a cross-bar and 4 SubROC modules. The output data is sent via 4 high-speed e-links.

  15. Piezoelectric drive circuit

    DOE Patents [OSTI]

    Treu, Jr., Charles A. (Raymore, MO)

    1999-08-31

    A piezoelectric motor drive circuit is provided which utilizes the piezoelectric elements as oscillators and a Meacham half-bridge approach to develop feedback from the motor ground circuit to produce a signal to drive amplifiers to power the motor. The circuit automatically compensates for shifts in harmonic frequency of the piezoelectric elements due to pressure and temperature changes.

  16. Piezoelectric drive circuit

    DOE Patents [OSTI]

    Treu, C.A. Jr.

    1999-08-31

    A piezoelectric motor drive circuit is provided which utilizes the piezoelectric elements as oscillators and a Meacham half-bridge approach to develop feedback from the motor ground circuit to produce a signal to drive amplifiers to power the motor. The circuit automatically compensates for shifts in harmonic frequency of the piezoelectric elements due to pressure and temperature changes. 7 figs.

  17. Rotation free flow of noncompressible fluid through the rotating wheel of centrifugal pump

    E-Print Network [OSTI]

    Tanski, Igor A

    2008-01-01

    The exact analytic solution is built for the plane flow of incompressible fluid through the wheel with profiles of blades approximating logarithmic spirals.

  18. Hydrogen Pathways: Cost, Well-to-Wheels Energy Use, and Emissions...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Well-to-Wheels Energy Use, and Emissions for the Current Technology Status of Seven Hydrogen Production, Delivery, and Distribution Scenarios Hydrogen Pathways: Cost,...

  19. Does Doctrine Drive Technology or Does Technology Drive Doctrine?

    E-Print Network [OSTI]

    Blasko, Dennis

    2010-01-01

    Policy Brief No. 4 September 2010 Does Doctrine DriveTechnology or Does Technology Drive Doctrine? Dennis Blaskoone way. However, technology does not determine strat- egy.

  20. US DRIVE Driving Research and Innovation for Vehicle Efficiency...

    Office of Environmental Management (EM)

    Documents & Publications US DRIVE Fuel Pathway Integration Technical Team Roadmap Hydrogen Program Goal-Setting Methodologies Report to Congress US DRIVE Hydrogen Production...

  1. Does Doctrine Drive Technology or Does Technology Drive Doctrine?

    E-Print Network [OSTI]

    Blasko, Dennis

    2010-01-01

    Brief No. 4 September 2010 Does Doctrine Drive Technology orDoes Technology Drive Doctrine? Dennis Blasko Summary Wthat emphasizes strategy over technology and may hold some

  2. Ride and Drive Webinar

    Broader source: Energy.gov [DOE]

    Listen to this webinar and follow along using the slides below to learn how on-site plug-in electric vehicle (PEV) Ride and Drives can create value for your organization, your employees, and your...

  3. Direct drive wind turbine

    DOE Patents [OSTI]

    Bywaters, Garrett Lee; Danforth, William; Bevington, Christopher; Stowell, Jesse; Costin, Daniel

    2006-09-19

    A wind turbine is provided that minimizes the size of the drive train and nacelle while maintaining the power electronics and transformer at the top of the tower. The turbine includes a direct drive generator having an integrated disk brake positioned radially inside the stator while minimizing the potential for contamination. The turbine further includes a means for mounting a transformer below the nacelle within the tower.

  4. Direct drive wind turbine

    DOE Patents [OSTI]

    Bywaters, Garrett; Danforth, William; Bevington, Christopher; Jesse, Stowell; Costin, Daniel

    2007-02-27

    A wind turbine is provided that minimizes the size of the drive train and nacelle while maintaining the power electronics and transformer at the top of the tower. The turbine includes a direct drive generator having an integrated disk brake positioned radially inside the stator while minimizing the potential for contamination. The turbine further includes a means for mounting a transformer below the nacelle within the tower.

  5. Direct drive wind turbine

    DOE Patents [OSTI]

    Bywaters, Garrett; Danforth, William; Bevington, Christopher; Stowell, Jesse; Costin, Daniel

    2006-07-11

    A wind turbine is provided that minimizes the size of the drive train and nacelle while maintaining the power electronics and transformer at the top of the tower. The turbine includes a direct drive generator having an integrated disk brake positioned radially inside the stator while minimizing the potential for contamination. The turbine further includes a means for mounting a transformer below the nacelle within the tower.

  6. Direct drive wind turbine

    DOE Patents [OSTI]

    Bywaters, Garrett; Danforth, William; Bevington, Christopher; Jesse, Stowell; Costin, Daniel

    2006-10-10

    A wind turbine is provided that minimizes the size of the drive train and nacelle while maintaining the power electronics and transformer at the top of the tower. The turbine includes a direct drive generator having an integrated disk brake positioned radially inside the stator while minimizing the potential for contamination. The turbine further includes a means for mounting a transformer below the nacelle within the tower.

  7. Investigations into the reproductive performance and larval rearing of the Brown shrimp, Farfantepenaeus aztecus, using closed recirculating systems 

    E-Print Network [OSTI]

    Gandy, Ryan Leighton

    2005-02-17

    tanks larval rearing management schedule????????? 54 4.2 Recirculating larval rearing feed and water turnover rate associated with larval developmental stage??????????????????. 56 4.3 Water quality indicators monitored and methods used... of spawning tanks from larval rearing tanks allowed for the hatchery manager to maximize larval rearing productivity by transferring only viable nauplii of known quality and quantity to larval rearing tanks. The use of certain species of unicellular algae...

  8. Geothermal Geodatabase for Wagon Wheel Hot Springs, Mineral County, Colorado

    SciTech Connect (OSTI)

    Zehner, Richard

    2012-11-01

    Geothermal Geodatabase for Wagon Wheel Hot Springs, Mineral County, Colorado By Richard “Rick” Zehner Geothermal Development Associates Reno Nevada USA 775.737.7806 rzehner@gdareno.com For Flint Geothermal LLC, Denver Colorado Part of DOE Grant EE0002828 2013 This is an ESRI geodatabase version 10, together with an ESRI MXD file version 10.2 Data is in UTM Zone 13 NAD27 projection North boundary: approximately 4,189,000 South boundary: approximately 4,170,000 West boundary: approximately 330,000 East boundary: approximately 351,000 This geodatabase was built to cover several geothermal targets developed by Flint Geothermal in 2012 during a search for high-temperature systems that could be exploited for electric power development. Several of the thermal springs at Wagon Wheel Gap have geochemistry and geothermometry values indicative of high-temperature systems. The datasets in the geodatabase are a mixture of public domain data as well as data collected by Flint Geothermal, now being made public. It is assumed that the user has internet access, for the mxd file accesses ESRI’s GIS servers. Datasets include: 1. Results of reconnaissance shallow (2 meter) temperature surveys 2. Air photo lineaments 3. Groundwater geochemistry 4. Power lines 5. Georeferenced geologic map of Routt County 6. Various 1:24,000 scale topographic maps

  9. Billiards Digest June, 2012 "VEPP Part III: Wagon Wheel Drills" ILLUSTRATED PRINCIPLES

    E-Print Network [OSTI]

    Alciatore, David G.

    Billiards Digest June, 2012 "VEPP ­ Part III: Wagon Wheel Drills" ILLUSTRATED PRINCIPLES David couple of articles, I introduced the series and covered some fundamentals and draw shot drills from the first disc. This month, we'll look at a useful "wagon wheel" drill from Disc II: "VEPP II ­ Position

  10. Cooperation of Heterogeneous, Autonomous Robots: A Case Study of Humanoid and Wheeled Robots

    E-Print Network [OSTI]

    Stryk, Oskar von

    Cooperation of Heterogeneous, Autonomous Robots: A Case Study of Humanoid and Wheeled Robots Jutta- ation of a strongly heterogeneous robot team, composed of a highly articulated humanoid robot and a wheeled robot with largely complementing and some competing capabilities. By combining two strongly

  11. Electric-Drive Vehicle engineering

    E-Print Network [OSTI]

    Berdichevsky, Victor

    Electric-Drive Vehicle engineering COLLEGE of ENGINEERING Electric-driveVehicle engineers for 80 years t Home to nation's first electric-drive vehicle engineering program and alternative-credit EDGE Engineering Entrepreneur Certificate Program is a great addition to an electric-drive vehicle

  12. U.S. DRIVE

    SciTech Connect (OSTI)

    2012-03-16

    U.S. DRIVE, which stands for United States Driving Research and Innovation for Vehicle efficiency and Energy sustainability, is an expanded government-industry partnership among the U.S. Department of Energy; USCAR, representing Chrysler Group LLC, Ford Motor Company and General Motors; Tesla Motors; five energy companies – BP America, Chevron Corporation, ConocoPhillips, ExxonMobil Corporation, and Shell Oil Products US; two utilities – Southern California Edison and Michigan-based DTE Energy; and the Electric Power Research Institute (EPRI). The U.S. DRIVE mission is to accelerate the development of pre-competitive and innovative technologies to enable a full range of affordable and clean advanced light-duty vehicles, as well as related energy infrastructure.

  13. Ceramic vane drive joint

    DOE Patents [OSTI]

    Smale, Charles H. (Indianapolis, IN)

    1981-01-01

    A variable geometry gas turbine has an array of ceramic composition vanes positioned by an actuating ring coupled through a plurality of circumferentially spaced turbine vane levers to the outer end of a metallic vane drive shaft at each of the ceramic vanes. Each of the ceramic vanes has an end slot of bow tie configuration including flared end segments and a center slot therebetween. Each of the vane drive shafts has a cross head with ends thereof spaced with respect to the sides of the end slot to define clearance for free expansion of the cross head with respect to the vane and the cross head being configured to uniformly distribute drive loads across bearing surfaces of the vane slot.

  14. Rotor bore and turbine rotor wheel/spacer heat exchange flow circuit

    DOE Patents [OSTI]

    Caruso, Philip M. (Selkirk, NY); Eldrid, Sacheverel Quentin (Saratoga Springs, NY); Ladhani, Azad A. (Niskayuna, NY); DeMania, Alan Richard (Niskayuna, NY); Palmer, Gene David (Clifton Park, NY); Wilson, Ian David (Clifton Park, NY); Rathbun, Lisa Shirley (Scotia, NY); Akin, Robert Craig (Schenectady, NY)

    2002-01-01

    In a turbine having closed-circuit steam-cooling passages about the rim of the rotor during steady-state operation, compressor discharge air is supplied to the rotor bore for passage radially outwardly into the wheel space cavities between the wheels and spacers. Communicating slots and channels in the spacers and wheels at circumferentially spaced positions enable egress of the compressor discharge air into the hot gas flow path. At turbine startup, cooling air flows through the closed-circuit steam passages to cool the outer rim of the rotor while compressor discharge air pre-warms the wheels and spacers. At steady-state, cooling steam is supplied in the closed-circuit steam-cooling passages and compressor discharge air is supplied through the bore and into the wheel space cavities to cool the rotor.

  15. Holiday Food Drive

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation CurrentHenry Bellamy, Ph.D.Food Drive Holiday Food Drive Laboratory employees

  16. Holiday Gift Drive

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation CurrentHenry Bellamy, Ph.D.Food Drive Holiday Food Drive Laboratory

  17. Optimal Power Flow Formulation in Market of Retail Wheeling Taiyou Yong, Student Member, IEEE Robert Lasseter, Fellow, IEEE

    E-Print Network [OSTI]

    Optimal Power Flow Formulation in Market of Retail Wheeling Taiyou Yong, Student Member, IEEE distribution in the new retail wheeling market. Formation of optimal power flow (OPF) problem, in which concerns on optimal power flow arise in the retail wheeling market. In the deregulated power system

  18. BOOKSHELF Hard Disk Drive

    E-Print Network [OSTI]

    Benmei, Chen

    » BOOKSHELF Hard Disk Drive Servo Systems, 2nd edition by B.M. CHEN, T.H. LEE, K. PENG, and V at Seagate Research working on spinstand microactuator integration, and I continued to work at Sea- gate part 15% of track pitch 3 , leads to fundamental challenges in position detection, while pushing band

  19. ORIGINAL ARTICLE Car safety seats for children: rear facing for best protection

    E-Print Network [OSTI]

    ORIGINAL ARTICLE Car safety seats for children: rear facing for best protection B Henary, C P between rear-facing (RFCS) and forward-facing (FFCS) car seats for children less than 2 years of age riding in passenger cars, sport utility vehicles, or light trucks were included in the study. Logistic

  20. Tectonic wedging along the rear of the offshore Taiwan accretionary prism

    E-Print Network [OSTI]

    Chi, Wu-Cheng

    Tectonic wedging along the rear of the offshore Taiwan accretionary prism Wu-Cheng Chia,b,*, Donald the rear of the offshore Taiwan accretionary prism were studied using seismic reflection profiling and gravity modeling. Deformation between the offshore prism and forearc basin at the point of incipient

  1. Variable Frequency Pump Drives 

    E-Print Network [OSTI]

    Karassik, I. J.; Petraccaro, L. L.; McGuire, J. T.

    1986-01-01

    variable flow operation, Fig. 2 variable system head, the objective of the latter being to maintain pump flow within an optimum range while accommodating a wide variation in system head. VARYING OPERATING CAPACITY OPERATING CAPACITY? N, RANGE HEAD...-rotor motors and variable speed devices have slip losses that significantly reduce the savings that accrue by operating pumps at variable speed. Steam turbine drives may not always be the most practical or economic solution. The variable frequency...

  2. Apparatus and methods for aligning holes through wheels and spacers and stacking the wheels and spacers to form a turbine rotor

    DOE Patents [OSTI]

    Berry, Robert Randolph (Greenville, SC); Palmer, Gene David (Clifton Park, NY); Wilson, Ian David (Clifton Park, NY)

    2000-01-01

    A gas turbine rotor stacking fixture includes upstanding bolts for reception in aligned bolt holes in superposed aft disk, wheels and spacers and upstanding alignment rods received in openings of the disk, wheels and spacers during the rotor stacking assembly. The axially registering openings enable insertion of thin-walled tubes circumferentially about the rim of the rotor, with tight tolerances to the openings to provide supply and return steam for cooling buckets. The alignment rods have radial dimensions substantially less than their dimensions in a circumferential direction to allow for radial opening misalignment due to thermal expansion, tolerance stack-up and wheel-to-spacer mismatch due to rabbet mechanical growth. The circumferential dimension of the alignment rods affords tightly toleranced alignment of the openings through which the cooling tubes are installed.

  3. Numerical Analysis of the Channel Wheel Fresh Air Ventilator Under Frosting Conditions 

    E-Print Network [OSTI]

    Gao, B.; Dong, Z.; Cheng, Z.; Luo, E.

    2006-01-01

    As new equipment, the channel wheel fresh air ventilator has become increasingly popular in recent years. However, when such equipment is operated under low ambient temperature in the freezing area in winter, the formation of frost on the outdoor...

  4. Enthalpy Wheels Come of Age: Applying Energy Recovery Ventilation to Hospitality Venues in Hot, Humid Climate 

    E-Print Network [OSTI]

    Wellford, B. W.

    2000-01-01

    Energy recovery ventilation systems, including rotary heat exchangers or enthalpy wheels, utilize mature technologies that are routinely applied in commercial buildings. Energy recovery is particularly important in buildings with significant outdoor...

  5. Well-to-Wheels Analysis of Advanced Fuel/Vehicle Systems - A...

    Broader source: Energy.gov (indexed) [DOE]

    analysis, commonly called a well-to-wheels (WTW) analysis that examines the use and emissions associated with fuel production (or well-to-tank WTT) activities and energy use...

  6. Development of legged, wheeled, and hybrid rover mobility models to facilitate planetary surface exploration mission analysis

    E-Print Network [OSTI]

    McCloskey, Scott H. (Scott Haddon)

    2007-01-01

    This work discusses the Mars Surface Exploration (MSE) tool and its adaptation to model rovers featuring legged, wheeled, and hybrid mobility. MSE is a MATLAB based systems engineering tool that is capable of rapidly ...

  7. Dynamical Modeling and Multi-Experiment Fitting with PottersWheel Supplement

    E-Print Network [OSTI]

    Timmer, Jens

    Dynamical Modeling and Multi-Experiment Fitting with PottersWheel ­ Supplement Thomas Maiwald@fdm.uni-freiburg.de June 10, 2008 Abstract This supplement provides detailed information about the functionalities

  8. Design of a rugged wheel for application in the Leveraged Freedom Chair

    E-Print Network [OSTI]

    Falcone, Sara Elizabeth

    2015-01-01

    This thesis analyses the front wheel of the Leveraged Freedom Chair (LFC) an all-terrain, off-road wheelchair with two distinct models: one for the developing world and one specifically for American riders. The functional ...

  9. The political economy of retail wheeling, or how to not re-fight the last war

    SciTech Connect (OSTI)

    Cohen, A.; Kihm, S.

    1994-04-01

    Disparities in utility rates - observably the result of poor supply-side resource planning - have been small before and will be small once again. Retail wheeling`s promise of short-run gains for a few would, ironically, destroy integrated resource processes in place today that guard against a repeat of yesterday`s planning mistakes. The authors argue that retail wheeling is a troubling answer to a mis-diagnosis of yesterday`s problem. They believe that a variety of other policies offer most of the benefits and few of the risks that retail wheeling poses. These include aggressive wholesale competition, judicious pruning of uneconomic capacity, and serious incorporation of environmental risks into utility planning and regulation.

  10. The Effect of Various Housing Combinations on Voluntary Wheel Activity in Mice 

    E-Print Network [OSTI]

    Cruthirds, Clayton

    2015-05-01

    accurate translation of results to human application. This study was designed to assess the effects of housing density and wheel availability on activity levels in mice. Six outbred female SENCAR mice (National Cancer Institute, Bethesda, MD) were housed...

  11. Driving Innovation through Federal

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n c i Framing DocumentUnits at Eight-<DominionAVOLUMEULP PEISSavingsDriving

  12. Marketing & Driving Demand Collaborative - Social Media Tools...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    & Driving Demand Collaborative - Social Media Tools & Strategies Marketing & Driving Demand Collaborative - Social Media Tools & Strategies Presentation slides from the Better...

  13. Next Generation Environmentally Friendly Driving Feedback Systems...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Environmentally Friendly Driving Feedback Systems Research and Development Next Generation Environmentally Friendly Driving Feedback Systems Research and Development 2012 DOE...

  14. Rotary drive mechanism

    SciTech Connect (OSTI)

    Kenderdine, E.W.

    1991-10-08

    This patent describes a rotary drive mechanism which includes a rotary solenoid having a stator and multi-poled rotor. A moving member rotates with the rotor and is biased by a biasing device. The biasing device causes a further rotational movement after rotation by the rotary solenoid. Thus, energization of the rotary solenoid moves the member in one direction to one position and biases the biasing device against the member. Subsequently, de- energization of the rotary solenoid causes the biasing device to move the member in the same direction to another position from where the moving member is again movable by energization and de-energization of the rotary solenoid. Preferably, the moving member is a multi-lobed cam having the same number of lobes as the rotor has poles. An anti- overdrive device is also preferably provided for preventing overdrive in the forward direction or a reverse rotation of the moving member and for precisely aligning the moving member.

  15. Rotary drive mechanism

    DOE Patents [OSTI]

    Kenderdine, Eugene W. (Albuquerque, NM)

    1991-01-01

    A rotary drive mechanism includes a rotary solenoid having a stator and multi-poled rotor. A moving member rotates with the rotor and is biased by a biasing device. The biasing device causes a further rotational movement after rotation by the rotary solenoid. Thus, energization of the rotary solenoid moves the member in one direction to one position and biases the biasing device against the member. Subsequently, de-energization of the rotary solenoid causes the biasing device to move the member in the same direction to another position from where the moving member is again movable by energization and de-energization of the rotary solenoid. Preferably, the moving member is a multi-lobed cam having the same number of lobes as the rotor has poles. An anti-overdrive device is also preferably provided for preventing overdrive in the forward direction or a reverse rotation of the moving member and for precisely aligning the moving member.

  16. Design and manufacture of a rear driveline package including limited slip differential for Formula SAE applications

    E-Print Network [OSTI]

    Yazicioglu, Tolga T

    2008-01-01

    This document describes the design and manufacture of a lightweight rear driveline package for a Formula SAE race car. The design focuses on all components needed to transfer power from the chain driven Honda CBR600 F4i ...

  17. Toto the Robot Figure 1. Toto, front view. Figure 2. Toto, rear view.

    E-Print Network [OSTI]

    Indiana University

    Toto the Robot Figure 1. Toto, front view. Figure 2. Toto, rear view. Toto the Robot was created so a robot, helps account for his lack of verbal charm. Second, some younger children may recognize in Toto

  18. Test Driving the Toyota Mirai

    Broader source: Energy.gov [DOE]

    Watch a video of Energy Secretary Ernest Moniz test driving the Toyota Mirai, the first fuel cell electric vehicle available for sale.

  19. Optomechanical Entanglement under Pulse Drive

    E-Print Network [OSTI]

    Qing Lin; Bing He

    2015-08-12

    We report a study of optomechanical entanglement under the drive of one or a series of laser pulses with arbitrary detuning and different pulse shapes. Because of the non-existence of system steady state under pulsed driving field, we adopt a different approach from the standard treatment to optomechanical entanglement. The situation of the entanglement evolution in high temperature is also discussed.

  20. Development of a Natural Rearing System to Improve Supplemental Fish Quality, 1996-1998 Progress Report.

    SciTech Connect (OSTI)

    Maynard, Desmond J.

    2001-09-13

    This report covers the 1996-1998 Natural Rearing Enhancement System (NATURES) research for increasing hatchery salmon postrelease survival and producing fish with more wild-like behavior, physiology, and morphology prior to release. Experiments were conducted evaluating automatic subsurface feeders; natural diets; exercise systems; seminatural raceway habitat enriched with cover, structure, and substrate; and predator avoidance conditioning for hatchery salmonids. Automatic subsurface feed delivery systems did not affect chinook salmon depth distribution or vulnerability to avian predators. Live-food diets only marginally improved the ability of chinook salmon to capture prey in stream enclosures. A prototype exercise system that can be retrofitted to raceways was developed, however, initial testing indicated that severe amounts of exercise may increase in culture mortality. Rearing chinook salmon in seminatural raceway habitat with gravel substrate, woody debris structure, and overhead cover improved coloration and postrelease survival without impacting in-culture health or survival. Steelhead fry reared in enriched environments with structure, cover, and point source feeders dominated and outcompeted conventionally reared fish. Exposing chinook salmon to caged predators increased their postrelease survival. Chinook salmon showed an antipredator response to chemical stimuli from injured conspecifics and exhibited acquired predator recognition following exposure to paired predator-prey stimuli. The report also includes the 1997 Natural Rearing System Workshop proceedings.

  1. Driving Safely In Smart Cars

    E-Print Network [OSTI]

    Puri, Anuj; Varaiya, Pravin

    1995-01-01

    Control of the Lead Car of a Platoon. IEEE Transactions on1993. Var93 P.Varaiya. Smart Cars on Smart Roads: ProblemsDriving Safely in Smart Cars Anuj Puri, Pravin Varaiya

  2. Upgrading coal plant damper drives

    SciTech Connect (OSTI)

    Hood, N.R.; Simmons, K. [Alamaba Power (United States)

    2009-11-15

    The replacement of damper drives on two coal-fired units at the James H. Miller Jr. electric generating plant by Intelligent Contrac electric rotary actuators is discussed. 2 figs.

  3. Adjustable Speed Drive Industrial Applications 

    E-Print Network [OSTI]

    Poole, J. N.

    1989-01-01

    Electric motors are significant users of electricity in the United States. Approximately 66 percent of the total electricity in the U.S. is used by electric motors. Electronic adjustable speed drives (ASDs) can save energy, lower maintenance cost...

  4. Design and control of multimodal single-legged vehicles with variable geometry reaction wheel arrays

    E-Print Network [OSTI]

    Schmidt-Wetekam, Christopher

    2011-01-01

    harmonic drive system,” Mechatronics, IEEE/ASME TransactionsMeasurement Unit,” Mechatronics, IEEE/ ASME Transactions

  5. Direct drive field actuator motors

    DOE Patents [OSTI]

    Grahn, Allen R. (Salt Lake City, UT)

    1998-01-01

    A positive-drive field actuator motor including a stator carrying at least one field actuator which changes in dimension responsive to application of an energy field, and at least one drive shoe movable by the dimensional changes of the field actuator to contact and move a rotor element with respect to the stator. Various embodiments of the motor are disclosed, and the rotor element may be moved linearly or arcuately.

  6. Direct drive field actuator motors

    DOE Patents [OSTI]

    Grahn, A.R.

    1998-03-10

    A positive-drive field actuator motor is described which includes a stator carrying at least one field actuator which changes in dimension responsive to application of an energy field, and at least one drive shoe movable by the dimensional changes of the field actuator to contact and move a rotor element with respect to the stator. Various embodiments of the motor are disclosed, and the rotor element may be moved linearly or arcuately. 62 figs.

  7. Low backlash direct drive actuator

    DOE Patents [OSTI]

    Kuklo, T.C.

    1994-10-25

    A low backlash direct drive actuator is described which comprises a motor such as a stepper motor having at least 200 steps per revolution; a two part hub assembly comprising a drive hub coaxially attached to the shaft of the motor and having a plurality of drive pins; a driven hub having a plurality of bores in one end thereof in alignment with the drive pins in the drive hub and a threaded shaft coaxially mounted in an opposite end of the driven hub; and a housing having a central bore therein into which are fitted the drive hub and driven hub, the housing having a motor mount on one end thereof to which is mounted the stepper motor, and a closed end portion with a threaded opening therein coaxial with the central bore in the housing and receiving therein the threaded shaft attached to the driven hub. Limit switches mounted to the housing cooperate with an enlarged lip on the driven hub to limit the lateral travel of the driven hub in the housing, which also acts to limit the lateral travel of the threaded shaft which functions as a lead screw. 10 figs.

  8. Vehicle Technologies Office: 2014 Electric Drive Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Vehicle Technologies Office: 2014 Electric Drive Technologies Annual Progress Report Vehicle Technologies Office: 2014 Electric Drive Technologies Annual Progress Report The...

  9. QER - Comment of Electric Drive Transportation Association |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Drive Transportation Association QER - Comment of Electric Drive Transportation Association From: Genevieve Cullen gcullen@electricdrive.org Sent: Friday, October 10, 2014 11:58...

  10. Grand Challenge Portfolio: Driving Innovations in Industrial...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Grand Challenge Portfolio: Driving Innovations in Industrial Energy Efficiency, January 2011 Grand Challenge Portfolio: Driving Innovations in Industrial Energy Efficiency, January...

  11. Patterns of Brain Activity Associated With Variation in Voluntary Wheel-Running Behavior

    E-Print Network [OSTI]

    Saltzman, Wendy

    Patterns of Brain Activity Associated With Variation in Voluntary Wheel- Running Behavior Justin S variation within and between species is unknown. This study used Fos immunoreactivity to compare brain, and striatum. Results implicate specific brain regions in motivation to run and others in control

  12. Rediscovering the Wheel. Thermochemical Analysis of Energetics of the Aromatic Diazines

    E-Print Network [OSTI]

    Chickos, James S.

    Rediscovering the Wheel. Thermochemical Analysis of Energetics of the Aromatic Diazines Sergey P: Thermochemical properties of pyrimidine, pyrazine, and pyridazine have been measured and re-evaluated to provide calorimetry and vapor pressure measurements. The gas and condensed phase enthalpies of formation of the parent

  13. All-terrain vehicle

    SciTech Connect (OSTI)

    Somerton-Rayner, M.

    1986-12-16

    This patent describes an all-terrain vehicle comprising: a chassis; four road wheel axles equally spaced along the chassis; suspension means mounting the axles on the chassis; wheels mounted adjacent both ends of each of the axles, the wheels on the foremost and the rearmost axles being steerably mounted; propulsion and driving means including a single internal combustion engine and gearbox, and first and second transfer boxes both coupled to be driven by the engine through the gearbox; the first transfer box driving the first and third axles and the second transfer box driving the second and fourth axles; means for driving in the alternative all four wheels and only the center two wheels; power-assisted steering gear means operatively connected to the steerably-mounted wheels of the foremost axle; and steering coupling means extending between the steerably-mounted wheels on the foremost and rearmost axles so dimensioned that upon steering of the front wheels, the rear wheels perform castoring constrained to a smaller turning angle and a lower rate of angular movement than the front wheels.

  14. 19.4% -EFFICIENT LARGE AREA REAR-PASSIVATED SCREEN-PRINTED SILICON SOLAR CELLS T. Dullweber*1

    E-Print Network [OSTI]

    -printed cells by 0.2% [6,7]. The electrical and optical losses of the full- area Al-BSF at the rear side can19.4% -EFFICIENT LARGE AREA REAR-PASSIVATED SCREEN-PRINTED SILICON SOLAR CELLS T. Dullweber*1 , S implemented a baseline solar cell process based on today's standard industrially manufactured silicon solar

  15. Improving the Speed of Virtual Rear Projection: A GPU-Centric Architecture Matthew Flagg, Jay Summet, and James M. Rehg

    E-Print Network [OSTI]

    Haro, Antonio

    front projection [15]. In Passive Virtual Rear Projection, dual projectors redun- dantly illuminate square foot in an office building [18]. Figure 1: Players interacting with a game on the BigBoard projected using passive virtual rear projection. currently use passive VRP across a large 17.5Ã?4.5 foot in

  16. Drive reconfiguration mechanism for tracked robotic vehicle

    DOE Patents [OSTI]

    Willis, W. David (Idaho Falls, ID)

    2000-01-01

    Drive reconfiguration apparatus for changing the configuration of a drive unit with respect to a vehicle body may comprise a guide system associated with the vehicle body and the drive unit which allows the drive unit to rotate about a center of rotation that is located at about a point where the drive unit contacts the surface being traversed. An actuator mounted to the vehicle body and connected to the drive unit rotates the drive unit about the center of rotation between a first position and a second position.

  17. Improvements in in vitro rearing methods of Toxoneuron nigriceps (viereck) (Hymenoptera:Braconidae), a larval endoparasitoid of Heliothis virescens (Lepidoptera: Noctuidae) 

    E-Print Network [OSTI]

    Kuriachan, Indira

    2006-08-16

    were incubated in the artificial rearing media. The growth (increase in length and width), development (molting), and survival of the incubated larvae were observed. Changes in osmotic pressure of the rearing media before and after incubation were...

  18. Houses for early weaned piglets : influence of rearing on the floor or in batteries,

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Houses for early weaned piglets : influence of rearing on the floor or in batteries, temperature-deck batteries on wire floor divided into 2 compartments : one at I8.!0 y- i°C, relative humidity 61+ io p. roo and in batteries were the following : 148 and z36 (period I), !2S and 495 (period 11), i. e. differences in favour

  19. Tactile Stimulation During Artificial Rearing Influences Adult Function and Morphology in a

    E-Print Network [OSTI]

    Sokolowski, Marla

    Tactile Stimulation During Artificial Rearing Influences Adult Function and Morphology number, size, and dendritic length in adulthood. Reduced maternal licking also produces deficits in adult, the maternal care reper- toire consists of nursing, licking, grooming, incubat- ing, and retrieving of pups

  20. BINOCULAR INTERACTION IN STRIATE CORTEX OF KITTENS REARED WITH ARTIFICIAL SQUINT'

    E-Print Network [OSTI]

    Hubel, David

    BINOCULAR INTERACTION IN STRIATE CORTEX OF KITTENS REARED WITH ARTIFICIAL SQUINT' DAVID H. HUBEL (strabismus or nonparallel visual axes) may suffer a deterioration of vision in one eye (amblyopia ex anopsia. An artificial squint therefore seemed to provide a possible means of obtaining a cortical defect while sparing

  1. A Comparison of Rearing Costs and Returns of Selected Herbivorous, Omnivorous, and

    E-Print Network [OSTI]

    A Comparison of Rearing Costs and Returns of Selected Herbivorous, Omnivorous, and Carnivorous Aquatic Species 'Derived from Table 2. 'Sources: NIH. 1972. and Anonymous, 1964. :lCost of production per k9 ~ (1.000 9 x edible portion x protein in edible portion per g)J " 1.000. [Cost 01 feed

  2. Anomalous-viscosity current drive

    DOE Patents [OSTI]

    Stix, T.H.; Ono, M.

    1986-04-25

    The present invention relates to a method and apparatus for maintaining a steady-state current for magnetically confining the plasma in a toroidal magnetic confinement device using anomalous viscosity current drive. A second aspect of this invention relates to an apparatus and method for the start-up of a magnetically confined toroidal plasma.

  3. Optimal Three-Material Wheel Assemblage of Conducting and Elastic Composites

    E-Print Network [OSTI]

    Andrej Cherkaev

    2011-05-22

    We describe a new type of three material microstructures which we call wheel assemblages, that correspond to extremal conductivity and extremal bulk modulus for a composite made of two materials and an ideal material. The exact lower bounds for effective conductivity and matching laminates was found in (Cherkaev, 2009) and for anisotropic composites, in (Cherkaev, Zhang, 2011). Here, we show different optimal structures that generalize the classical Hashin-Shtrikman coated spheres (circles). They consist of circular inclusions which contain a solid central circle (hub) and radial spikes in a surrounding annulus, and (for larger volume fractions of the best material) an annulus filled with it. The same wheel assemblages are optimal for the pair of dual problems of minimal conductivity (resistivity) of a composite made from two materials and an ideal conductor (insulator), in the problem of maximal effective bulk modulus of elastic composites made from two linear elastic material and void, and the dual minimum problem.

  4. Pulse width modulated push-pull driven parallel resonant converter with active free-wheel

    DOE Patents [OSTI]

    Reass, William A.; Schrank, Louis

    2004-06-22

    An apparatus and method for high frequency alternating power generation to control kilowatts of supplied power in microseconds. The present invention includes a means for energy storage, push-pull switching means, control electronics, transformer means, resonant circuitry and means for excess energy recovery, all in electrical communication. A push-pull circuit works synchronously with a force commutated free-wheel transistor to provide current pulses to a transformer. A change in the conduction angle of the push-pull circuit changes the amount of energy coupled into the transformer's secondary oscillating circuit, thereby altering the induced secondary resonating voltage. At the end of each pulse, the force commutated free-wheel transistor causes residual excess energy in the primary circuit to be transmitted back to the storage capacitor for later use.

  5. Redundant Arrays of IDE Drives

    E-Print Network [OSTI]

    D. A. Sanders; L. M. Cremaldi; V. Eschenburg; C. N. Lawrence; C. Riley; D. J. Summers; D. L. Petravick

    2002-12-05

    The next generation of high-energy physics experiments is expected to gather prodigious amounts of data. New methods must be developed to handle this data and make analysis at universities possible. We examine some techniques that use recent developments in commodity hardware. We test redundant arrays of integrated drive electronics (IDE) disk drives for use in offline high-energy physics data analysis. IDE redundant array of inexpensive disks (RAID) prices now equal the cost per terabyte of million-dollar tape robots! The arrays can be scaled to sizes affordable to institutions without robots and used when fast random access at low cost is important. We also explore three methods of moving data between sites; internet transfers, hot pluggable IDE disks in FireWire cases, and writable digital video disks (DVD-R).

  6. Optimization of condensing gas drive 

    E-Print Network [OSTI]

    Lofton, Larry Keith

    1977-01-01

    - cal, undersaturated reservoir with gas being injected into the crest and oil being produced from the base of the structure. Fractional oil re- covery at gas breakthrough proved to be less sensitive to changes in oil withdrawal rates as the gas... injection pressure was increased. The validity of the model was established by accurately simulating several low pressure gas drives conducted in the laboratory. Oil recoveries at gas breakthrough using the model compared closely with those recoveries...

  7. What If Cars Could Drive Themselves?

    E-Print Network [OSTI]

    Shladover, Steven E.

    2000-01-01

    What If Cars Could Drive Themselves? BY STEVEN E.SHLADOVER E V E N W H E N cars were still young, futuristssome of the implications of cars that could drive t h e m s

  8. Consider Steam Turbine Drives for Rotating Equipment | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Steam Turbine Drives for Rotating Equipment Consider Steam Turbine Drives for Rotating Equipment This tip sheet outlines the benefits of steam turbine drives for rotating equipment...

  9. US DRIVE Vehicle Systems and Analysis Technical Team Roadmap...

    Broader source: Energy.gov (indexed) [DOE]

    DRIVE Technical Teams in determining performance goals and validation metrics. vsattroadmapjune2013.pdf More Documents & Publications US DRIVE Driving Research and Innovation...

  10. Vehicle Technologies Office: U.S. DRIVE 2014 Technical Accomplishments...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Vehicle Technologies Office: U.S. DRIVE 2014 Technical Accomplishments Report Vehicle Technologies Office: U.S. DRIVE 2014 Technical Accomplishments Report The U.S. DRIVE 2014...

  11. Fluid cooled vehicle drive module

    DOE Patents [OSTI]

    Beihoff, Bruce C.; Radosevich, Lawrence D.; Meyer, Andreas A.; Gollhardt, Neil; Kannenberg, Daniel G.

    2005-11-15

    An electric vehicle drive includes a support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. The support, in conjunction with other packaging features may form a shield from both external EM/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  12. Traction Drive Systems Breakout Group

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal Gas &SCE- Non-ResidentialAlliantPGEDepartment ofpresentationTRACTION DRIVE SYSTEM

  13. ARM - SGP Rural Driving Hazards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Comments?govInstrumentsnoaacrnBarrow, Alaska OutreachCalendarPressExtended Facility SGP RelatedRural Driving

  14. Improved wastewater treatment at Wheeling-Pittsburgh Steel Corporations`s Steubenville East Coke Plant

    SciTech Connect (OSTI)

    Goshe, A.J.; Nodianos, M.J. [Wheeling-Pittsburgh Steel Corp., Follansbee, WV (United States)

    1995-12-01

    Wheeling-Pittsburgh Steel Corporation recently improved its wastewater treatment at it`s by-products coke plant. This has led to greatly improved effluent quality. Excess ammonia liquor, along with wastewater from the light oil recovery plant, desulfurization facility, and coal pile runoff, must be treated prior to being discharged into the Ohio River. This is accomplished using a biological wastewater treatment plant to remove 99.99% of the organic contaminants and ammonia. Biologically treated, clarified wastewater is now polished in the newly constructed tertiary treatment plant.

  15. Outdoor Air, Heat Wheels and JCPenney: A New Approach to Retail Ventilation 

    E-Print Network [OSTI]

    Smith, C. S.; Bartlett, T. A.

    1998-01-01

    grains/lbat) Winter 70°F Dry Bulb Ventilation Rates 0.3 cWSF for the 1" Floor 0.2 cWSF for the 2"* Floor Design Electrical Loading 2.3 W/SF average over the sales area - Ambient Design Conditions Summer 95°F Design Dry Bulb 77°F Mean... with the heat wheel were significant at approximately $1 1,000, they were limited by the low utility rate of hs location. Neither the energy charge nor the electrical demand charge were significantly high. This lower utility rate lengthened the simple...

  16. Performance Studies of Micromegas Chambers for the New Small Wheel Upgrade Project

    E-Print Network [OSTI]

    Ntekas, Konstantinos; The ATLAS collaboration

    2015-01-01

    Micromegas, an abbreviation for Micro MEsh Gaseous Structure (MM), is a robust detector with excellent spatial resolution and high rate capability. An $R\\&D$ activity, called Muon ATLAS MicroMegas Activity (MAMMA), was initiated in 2007 in order to explore the potential of the MM technology for use in the ATLAS experiment. After several years of prototyping and testing, the ATLAS collaboration has chosen the MM technology along with the small-strip Thin Gap Chambers (sTGC) for the upgrade of the inner muon station in the high-rapidity region, the so called New Small Wheel (NSW) upgrade project. It will employ eight layers of MM and eight layers of sTGC detectors per wheel. The NSW project requires fully efficient MM chambers, able to cope with the maximum expected rate of $15\\,\\mathrm{kHz/cm^2}$ featuring single plane spatial resolution better than $100\\,\\mu\\mathrm{m}$. The MM detectors will cover a total active area of $\\sim1200\\,\\mathrm{m^2}$ and will be operated in a moderate magnetic field with intens...

  17. Fiber optic sensor system for detecting movement or position of a rotating wheel bearing

    DOE Patents [OSTI]

    Veeser, Lynn R. (Los Alamos, NM); Rodriguez, Patrick J. (Santa Fe, NM); Forman, Peter R. (Los Alamos, NM); Monahan, Russell E. (Ann Arbor, MI); Adler, Jonathan M. (Ypsilanti, MI)

    1997-01-01

    An improved fiber optic sensor system and integrated sensor bearing assembly for detecting movement or position of a rotating wheel bearing having a multi-pole tone ring which produces an alternating magnetic field indicative of movement and position of the rotating member. A magneto-optical material, such as a bismuth garnet iron (B.I.G.) crystal, having discrete magnetic domains is positioned in the vicinity of the tone ring so that the domains align themselves to the magnetic field generated by the tone ring. A single fiber optic cable, preferably single mode fiber, carries light generated by a source of light to the B.I.G. crystal. The light passes through the B.I.G. crystal and is refracted at domain boundaries in the crystal. The intensity of the refracted light is indicative of the amount of alignment of the domains and therefore the strength of the magnetic field. The refracted light is carried by the fiber optic cable to an optic receiver where the intensity is measured and an electrical signal is generated and sent to a controller indicating the frequency of the changes in light intensity and therefore the rotational speed of the rotating wheel bearing.

  18. Well-to-wheels analysis of fuel-cell vehicle/fuel systems.

    SciTech Connect (OSTI)

    Wang, M.

    2002-01-22

    Major automobile companies worldwide are undertaking vigorous research and development efforts aimed at developing fuel-cell vehicles (FCVs). Proton membrane exchange (PEM)-based FCVs require hydrogen (H{sub 2}) as the fuel-cell (FC) fuel. Because production and distribution infrastructure for H{sub 2} off board FCVs as a transportation fuel does not exist yet, researchers are developing FCVs that can use hydrocarbon fuels, such as methanol (MeOH) and gasoline, for onboard production of H{sub 2} via fuel processors. Direct H{sub 2} FCVs have no vehicular emissions, while FCVs powered by hydrocarbon fuels have near-zero emissions of criteria pollutants and some carbon dioxide (CO{sub 2}) emissions. However, production of H{sub 2} can generate a large amount of emissions and suffer significant energy losses. A complete evaluation of the energy and emission impacts of FCVs requires an analysis of energy use and emissions during all stages, from energy feedstock wells to vehicle wheels--a so-called ''well-to-wheels'' (WTW) analysis. This paper focuses on FCVs powered by several transportation fuels. Gasoline vehicles (GVs) equipped with internal combustion engines (ICEs) are the baseline technology to which FCVs are compared. Table 1 lists the 13 fuel pathways included in this study. Petroleum-to-gasoline (with 30-ppm sulfur [S] content) is the baseline fuel pathway for GVs.

  19. Electric vehicle drive train with contactor protection

    DOE Patents [OSTI]

    Konrad, Charles E. (Roanoke, VA); Benson, Ralph A. (Roanoke, VA)

    1994-01-01

    A drive train for an electric vehicle includes a traction battery, a power drive circuit, a main contactor for connecting and disconnecting the traction battery and the power drive circuit, a voltage detector across contacts of the main contactor, and a controller for controlling the main contactor to prevent movement of its contacts to the closed position when the voltage across the contacts exceeds a predetermined threshold, to thereby protect the contacts of the contactor. The power drive circuit includes an electric traction motor and a DC-to-AC inverter with a capacitive input filter. The controller also inhibits the power drive circuit from driving the motor and thereby discharging the input capacitor if the contacts are inadvertently opened during motoring. A precharging contactor is controlled to charge the input filter capacitor prior to closing the main contactor to further protect the contacts of the main contactor.

  20. Electric vehicle drive train with contactor protection

    DOE Patents [OSTI]

    Konrad, C.E.; Benson, R.A.

    1994-11-29

    A drive train for an electric vehicle includes a traction battery, a power drive circuit, a main contactor for connecting and disconnecting the traction battery and the power drive circuit, a voltage detector across contacts of the main contactor, and a controller for controlling the main contactor to prevent movement of its contacts to the closed position when the voltage across the contacts exceeds a predetermined threshold, to thereby protect the contacts of the contactor. The power drive circuit includes an electric traction motor and a DC-to-AC inverter with a capacitive input filter. The controller also inhibits the power drive circuit from driving the motor and thereby discharging the input capacitor if the contacts are inadvertently opened during motoring. A precharging contactor is controlled to charge the input filter capacitor prior to closing the main contactor to further protect the contacts of the main contactor. 3 figures.

  1. Well-to-Wheels Analysis of Advanced Fuel/Vehicle Systems: A North American Study of Energy Use, Greenhouse Gas Emissions, and Criteria Pollutant Emissions

    SciTech Connect (OSTI)

    Brinkman, Norman; Wang, Michael; Weber, Trudy; Darlington, Thomas

    2005-05-01

    An accurate assessment of future fuel/propulsion system options requires a complete vehicle fuel-cycle analysis, commonly called a well-to-wheels (WTW) analysis. This WTW study analyzes energy use and emissions associated with fuel production (or well-to-tank [WTT]) activities and energy use and emissions associated with vehicle operation (or tank-to-wheels [TTW]) activities.

  2. Viruses in laboratory-reared cactus moth, Cactoblastis cactorum (Lepidoptera: Pyralidae)

    SciTech Connect (OSTI)

    Marti, O.G.; Myers, R.E.; Carpenter, J.E.; Styer, E.L.

    2007-03-15

    The cactus moth, Cactoblastis cactorum (Lepidoptera: Pyralidae: Phycitinae), is a non-native species threatening a variety of native cacti, particularly endangered species of Opuntia (Zimmerman et al. 2001), on the coast of the Gulf of Mexico. Cactoblastis cactorum populations have expanded from Florida northward along the Atlantic coast as far as Charleston, SC, and westward along the Gulf of Mexico to Dauphin Island, south of Mobile, AL. It is feared that further movement to the west will allow C. cactorum to enter the US desert Southwest and Mexico, particularly the latter. Numerous cactus species, especially those of the genera Opuntia and Nopalea, are native to the U.S. and Mexico. Local economies based on agricultural and horticultural uses of cacti could be devastated by C. cactorum (Vigueras and Portillo 2001). A bi-national control program between the US and Mexico is being developed, utilizing the sterile insect technique (SIT). In the SIT program, newly emerged moths are irradiated with a {sup 60}Co source and released to mate with wild individuals. The radiation dose completely sterilizes the females and partially sterilizes the males. When irradiated males mate with wild females, the F1 progeny of these matings are sterile. In order for the SIT program to succeed, large numbers of moths must be reared from egg to adult on artificial diet in a quarantined rearing facility (Carpenter et al. 2001). Irradiated insects must then be released in large numbers at the leading edge of the invasive population and at times which coincide with the presence of wild individuals available for mating. Mortality from disease in the rearing colony disrupts the SIT program by reducing the numbers of insects available for release.

  3. Captive Rearing Program for Salmon River Chinook Salmon, 2000 Project Progress Report.

    SciTech Connect (OSTI)

    Venditti, David A.

    2002-04-01

    During 2000, the Idaho Department of Fish and Game (IDFG) continued to develop techniques to rear chinook salmon Oncorhynchus tshawytscha to sexual maturity in captivity and to monitor their reproductive performance under natural conditions. Eyed-eggs were collected to establish captive cohorts from three study streams and included 503 eyed-eggs from East Fork Salmon River (EFSR), 250 from the Yankee Fork Salmon River, and 304 from the West Fork Yankee Fork Salmon River (WFYF). After collection, the eyed-eggs were immediately transferred to the Eagle Fish Hatchery, where they were incubated and reared by family group. Juveniles collected the previous summer were PIT and elastomer tagged and vaccinated against vibrio Vibrio spp. and bacterial kidney disease before the majority (approximately 75%) were transferred to the National Marine Fisheries Service, Manchester Marine Experimental Station for saltwater rearing through sexual maturity. Smolt transfers included 158 individuals from the Lemhi River (LEM), 193 from the WFYF, and 372 from the EFSR. Maturing fish transfers from the Manchester facility to the Eagle Fish Hatchery included 77 individuals from the LEM, 45 from the WFYF, and 11 from the EFSR. Two mature females from the WFYF were spawned in captivity with four males in 2000. Only one of the females produced viable eggs (N = 1,266), which were placed in in-stream incubators by personnel from the Shoshone-Bannock Tribe. Mature adults (N = 70) from the Lemhi River were released into Big Springs Creek to evaluate their reproductive performance. After release, fish distributed themselves throughout the study section and displayed a progression of habitat associations and behavior consistent with progressing maturation and the onset of spawning. Fifteen of the 17 suspected redds spawned by captive-reared parents in Big Springs Creek were hydraulically sampled to assess survival to the eyed stage of development. Eyed-eggs were collected from 13 of these, and survival ranged from 0% to 96%, although there was evidence that some eggs had died after reaching the eyed stage. Six redds were capped in an attempt to document fry emergence, but none were collected. A final hydraulic sampling of the capped redds yielded nothing from five of the six, but 75 dead eggs and one dead fry were found in the sixth. Smothering by fine sediment is the suspected cause of the observed mortality between the eyed stage and fry emergence.

  4. Urat Rear Banner Jihe Orient Wind Energy Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop IncIowa (Utility Company) JumpGTZ ClimateFeedUrat Rear Banner Jihe Orient Wind

  5. Centerless-drive solar collector system

    SciTech Connect (OSTI)

    Butler, B. L.

    1985-12-24

    A parabolic-trough solar collector system is disclosed, with each collector driven to track the sun using a ring driven in centerless fashion. The parabolic troughs are made of laminated plywood or molded or formed of plastics or metals. The drive motor moves a flexible belt, i.e., chain or cable, which is routed about the drive ring on each collector. The motion of the cable moves all drive rings together to track the sun. A photodetector senses the position of the sun and provides the signal needed to drive the collectors in the correct direction.

  6. Marketing & Driving Demand: Social Media Tools & Strategies ...

    Broader source: Energy.gov (indexed) [DOE]

    January 16, 2011 Conference Call transcript: "Marketing & Driving Demand: Social Media Tools & Strategies," from the U.S. Department of Energy. Conference call transcript More...

  7. Advanced Electric Drive Vehicles ? A Comprehensive Education...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    -- Washington D.C. tiarravt034ferdowsi2010o.pdf More Documents & Publications Advanced Electric Drive Vehicles A Comprehensive Education, Training, and Outreach Program...

  8. Advanced Electric Drive Vehicles ? A Comprehensive Education...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Meeting arravt034tiferdowsi2012o.pdf More Documents & Publications Advanced Electric Drive Vehicles A Comprehensive Education, Training, and Outreach Program...

  9. Advanced Electric Drive Vehicles ? A Comprehensive Education...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Peer Evaluation arravt034tiferdowsi2011p.pdf More Documents & Publications Advanced Electric Drive Vehicles A Comprehensive Education, Training, and Outreach Program...

  10. Vehicle Technologies Office: 2014 Electric Drive Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    automotive technologies under development. Research is focused on developing power electronics (PE), electric motor, and traction drive system (TDS) technologies that will reduce...

  11. High Efficiency Driving Electronics for General Illumination...

    Office of Scientific and Technical Information (OSTI)

    Driving Electronics for General Illumination LED Luminaires Upadhyay, Anand 32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATION New generation of standalone LED driver platforms...

  12. Grand Challenge Portfolio: Driving Innovations in Industrial...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    8 Grand Challenge Portfolio: Driving Innovations in Industrial Energy Efficiency, January 2011 - pg 8 grandchallengesportfoliopg8.pdf More Documents & Publications Grand...

  13. Grand Challenge Portfolio: Driving Innovations in Industrial...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    9 Grand Challenge Portfolio: Driving Innovations in Industrial Energy Efficiency, January 2011 - pg 9 grandchallengesportfoliopg9.pdf More Documents & Publications Grand...

  14. Grand Challenge Portfolio: Driving Innovations in Industrial...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6 Grand Challenge Portfolio: Driving Innovations in Industrial Energy Efficiency, January 2011 - pg 6 grandchallengesportfoliopg6.pdf More Documents & Publications Grand...

  15. Fuel Economy: What Drives Consumer Choice?

    E-Print Network [OSTI]

    Turrentine, Tom; Kurani, Kenneth S; Heffner, Reid R.

    2008-01-01

    Car Buyers and Fuel Economy? ” Energy Policy, vol. 35, 2007.Fuel Economy: What Drives Consumer Choice? BY TOMyou think about fuel economy? ” Rather, we listened closely

  16. Fuel Economy: What Drives Consumer Choice?

    E-Print Network [OSTI]

    Turrentine, Tom; Kurani, Kenneth; Heffner, Rusty

    2007-01-01

    Car Buyers and Fuel Economy? ” Energy Policy, vol. 35, 2007.Fuel Economy: What Drives Consumer Choice? BY TOMyou think about fuel economy? ” Rather, we listened closely

  17. Electric-Drive Vehicle Basics (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-04-01

    Describes the basics of electric-drive vehicles, including hybrid electric vehicles, plug-in hybrid electric vehicles, all-electric vehicles, and the various charging options.

  18. Microfabricated microengine for use as a mechanical drive and power source in the microdomain and fabrication process

    DOE Patents [OSTI]

    Garcia, E.J.; Sniegowski, J.J.

    1997-05-20

    A microengine uses two synchronized linear actuators as a power source and converts oscillatory motion from the actuators into rotational motion via direct linkage connection to an output gear or wheel. The microengine provides output in the form of a continuously rotating output gear that is capable of delivering drive torque to a micromechanism. The microengine can be operated at varying speeds and its motion can be reversed. Linear actuators are synchronized in order to provide linear oscillatory motion to the linkage means in the X and Y directions according to a desired position, rotational direction and speed of said mechanical output means. The output gear has gear teeth on its outer perimeter for directly contacting a micromechanism requiring mechanical power. The gear is retained by a retaining means which allows said gear to rotate freely. The microengine is microfabricated of polysilicon on one wafer using surface micromachining batch fabrication. 30 figs.

  19. Microfabricated microengine for use as a mechanical drive and power source in the microdomain and fabrication process

    DOE Patents [OSTI]

    Garcia, Ernest J. (Albuquerque, NM); Sniegowski, Jeffry J. (Albuquerque, NM)

    1997-01-01

    A microengine uses two synchronized linear actuators as a power source and converts oscillatory motion from the actuators into rotational motion via direct linkage connection to an output gear or wheel. The microengine provides output in the form of a continuously rotating output gear that is capable of delivering drive torque to a micromechanism. The microengine can be operated at varying speeds and its motion can be reversed. Linear actuators are synchronized in order to provide linear oscillatory motion to the linkage means in the X and Y directions according to a desired position, rotational direction and speed of said mechanical output means. The output gear has gear teeth on its outer perimeter for directly contacting a micromechanism requiring mechanical power. The gear is retained by a retaining means which allows said gear to rotate freely. The microengine is microfabricated of polysilicon on one wafer using surface micromachining batch fabrication.

  20. Efficient proton acceleration and focusing by an ultraintense laser interacting with a parabolic double concave target with an extended rear

    SciTech Connect (OSTI)

    Bake, Muhammad Ali; Xie, Bai-Song; Aimidula, Aimierding [Key Laboratory of Beam Technology and Materials Modification of the Ministry of Education, College of Nuclear Science and Technology, Beijing Normal University, Beijing 100875 (China)] [Key Laboratory of Beam Technology and Materials Modification of the Ministry of Education, College of Nuclear Science and Technology, Beijing Normal University, Beijing 100875 (China); Wang, Hong-Yu [Department of Physics, Anshan Normal University, Anshan 114005 (China) [Department of Physics, Anshan Normal University, Anshan 114005 (China); Shanghai Bright-Tech Information Technology Co. Ltd., Shanghai 200136 (China)

    2013-07-15

    A new scheme for acceleration and focusing of protons via an improved parabolic double concave target irradiated by an ultraintense laser pulse is proposed. When an intense laser pulse illuminates a concave target, the hot electrons are concentrated on the focal region of the rear cavity and they form a strong space-charge-separation field, which accelerates the protons. For a simple concave target, the proton energy spectrum becomes very broad outside the rear cavity because of transverse divergence of the electromagnetic fields. However, particle-in-cell simulations show that, when the concave target has an extended rear, the hot electrons along the wall surface induce a transverse focusing sheath field, resulting in a clear enhancement of proton focusing, which makes the lower proton energy spread, while, leads to a little reduction of the proton bunch peak energy.

  1. DRIVE Analysis Tool Generates Custom Vehicle Drive Cycles Based on Real-World Data (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-04-01

    This fact sheet from the National Renewable Energy Laboratory describes the Drive-Cycle Rapid Investigation, Visualization, and Evaluation (DRIVE) analysis tool, which uses GPS and controller area network data to characterize vehicle operation and produce custom vehicle drive cycles, analyzing thousands of hours of data in a matter of minutes.

  2. Researchers have been using STFC's ISIS neutron and muon source to investigate cracking in train wheels and potential methods of

    E-Print Network [OSTI]

    Researchers have been using STFC's ISIS neutron and muon source to investigate cracking in train with a great business idea. For more information about how your business could benefit from access to ISIS: Tel: +44 (0)1925 603708 Email: innovations@stfc.ac.uk Twitter: @STFC_B2B Using ISIS to optimise train wheel

  3. Biomechanical and psychophysical evaluation of using a two-wheel cart to transport loads over a curb 

    E-Print Network [OSTI]

    King, Rebecca Lynn

    1997-01-01

    ) involved altering the amount of weight placed on the cart, the diameter of the wheels, and the load center of gravity. For the heavier load of 68 kg (150 lb), the forces exerted on the force plates (p=0.0001) and the dynamic moments (P=0...

  4. February 7, 2009 "Friends come first, mathematics after." Raoul once said, as he smiled and wheeled his bicycle out

    E-Print Network [OSTI]

    Mazur, Barry

    and wheeled his bicycle out of his office, and down the corridor to meet a visiting friend of his in a local coffee shop, his worn golden-brown portfolio balanced on his bicycle seat. Raoul Bott was a wonderful: as he smiled, made his way down a corridor, looked for his lost gloves, walked his bicycle

  5. Analysis of the Energy-Saving Potential of a Three-Rotary Wheel Fresh Air-Handling Unit 

    E-Print Network [OSTI]

    Hao, X.; Zhang, G.; Zou, S.; Liu, H.

    2006-01-01

    To evaluate the energy-saving potential of a proposed three-rotary wheel fresh air-handling unit (TRWFAHU), it is numerically simulated with weather data of Changsha by using a mathematical model. Compared with a conventional fresh air-handling unit...

  6. METHODS OF RADIO-FREQUENCY CURRENT DRIVE

    E-Print Network [OSTI]

    -670 Radio-frequency waves can penetrate thermonuclear plasmas, depositing momentum and energy with great. INTRODUCTION Using radio-frequency (rf) waves to drive the toroidal current in tokamak reactors is attractiveMETHODS OF RADIO-FREQUENCY CURRENT DRIVE N. J. FISCH* Princeton Plasma Physics Laboratory

  7. The MITRE Corporation 7515 Colshire Drive

    E-Print Network [OSTI]

    Tritium JASON The MITRE Corporation 7515 Colshire Drive McLean, Virginia 22102-7508 (703) 983 ORGANIZATION REPORT NUMBER The MITRE Corporation JASON Program Office 7515 Colshire Drive McLean, Virginia of tritium per year of operation which must be bred as part of the overall reactor cycle. Traditionally

  8. Control rod drive hydraulic system

    DOE Patents [OSTI]

    Ose, Richard A. (San Jose, CA)

    1992-01-01

    A hydraulic system for a control rod drive (CRD) includes a variable output-pressure CR pump operable in a charging mode for providing pressurized fluid at a charging pressure, and in a normal mode for providing the pressurized fluid at a purge pressure, less than the charging pressure. Charging and purge lines are disposed in parallel flow between the CRD pump and the CRD. A hydraulic control unit is disposed in flow communication in the charging line and includes a scram accumulator. An isolation valve is provided in the charging line between the CRD pump and the scram accumulator. A controller is operatively connected to the CRD pump and the isolation valve and is effective for opening the isolation valve and operating the CRD pump in a charging mode for charging the scram accumulator, and closing the isolation valve and operating the CRD pump in a normal mode for providing to the CRD through the purge line the pressurized fluid at a purge pressure lower than the charging pressure.

  9. Risks of using AP locations discovered through war driving

    E-Print Network [OSTI]

    Kotz, David

    Risks of using AP locations discovered through war driving Minkyong Kim, Jeffrey J. Fielding the actual locations are often unavailable, they use estimated locations from war driving estimated through war driving. War driving is the process of collecting Wi-Fi beacons by driving or walking

  10. Chapter 18: Variable Frequency Drive Evaluation Protocol

    SciTech Connect (OSTI)

    Romberger, J.

    2014-11-01

    An adjustable-speed drive (ASD) includes all devices that vary the speed of a rotating load, including those that vary the motor speed and linkage devices that allow constant motor speed while varying the load speed. The Variable Frequency Drive Evaluation Protocol presented here addresses evaluation issues for variable-frequency drives (VFDs) installed on commercial and industrial motor-driven centrifugal fans and pumps for which torque varies with speed. Constant torque load applications, such as those for positive displacement pumps, are not covered by this protocol. Other ASD devices, such as magnetic drive, eddy current drives, variable belt sheave drives, or direct current motor variable voltage drives, are also not addressed. The VFD is by far the most common type of ASD hardware. With VFD speed control on a centrifugal fan or pump motor, energy use follows the affinity laws, which state that the motor electricity demand is a cubic relationship to speed under ideal conditions. Therefore, if the motor runs at 75% speed, the motor demand will ideally be reduced to 42% of full load power; however, with other losses it is about 49% of full load power.

  11. Wind turbine ring/shroud drive system

    DOE Patents [OSTI]

    Blakemore, Ralph W.

    2005-10-04

    A wind turbine capable of driving multiple electric generators having a ring or shroud structure for reducing blade root bending moments, hub loads, blade fastener loads and pitch bearing loads. The shroud may further incorporate a ring gear for driving an electric generator. In one embodiment, the electric generator may be cantilevered from the nacelle such that the gear on the generator drive shaft is contacted by the ring gear of the shroud. The shroud also provides protection for the gearing and aids in preventing gear lubricant contamination.

  12. Biofuels development in Maine: Using trees to oil the wheels of sustainability -Maine news, sports, obituaries, weather -Bangor Daily News http://bangordailynews.com/2013/03/12/opinion/biofuels-development-in-maine-using-trees-to-oil-the-wheels-of-sustain

    E-Print Network [OSTI]

    Thomas, Andrew

    Biofuels development in Maine: Using trees to oil the wheels of sustainability - Maine news, sports, obituaries, weather - Bangor Daily News http://bangordailynews.com/2013/03/12/opinion/biofuels-development-in-maine-using-trees-to-oil-the-wheels-of-sustainability/print/[3/13/2013 1:54:43 PM] Biofuels development

  13. Rear-Facing Car Safety Seats: Getting the Message Marilyn J. Bull, MDa, Dennis R. Durbin, MD, MSCEb

    E-Print Network [OSTI]

    COMMENTARY Rear-Facing Car Safety Seats: Getting the Message Right Marilyn J. Bull, MDa, Dennis R and young children regarding the safest way for them to ride in a car. Child fatalities and injuries and research provided by the National High- way Traffic Safety Administration, the car safety seat

  14. Phase modulated rotor angle encoder for switched reluctance motor drive 

    E-Print Network [OSTI]

    Mahajan, Shailendra

    1993-01-01

    Advantages of the switched reluctance motor (SRM) drive makes it an attractive candidate for replacing many adjustable speed ac and dc drives, in both industrial and consumer applications. The switched reluctance drives ...

  15. Test Drive: Honda FCX Clarity | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Test Drive: Honda FCX Clarity Test Drive: Honda FCX Clarity May 14, 2010 - 10:52am Addthis A member of the Energy Empowers team takes the Honda FCX Clarity for a drive outside the...

  16. Universal power transistor base drive control unit

    DOE Patents [OSTI]

    Gale, Allan R. (Allen Park, MI); Gritter, David J. (Racine, WI)

    1988-01-01

    A saturation condition regulator system for a power transistor which achieves the regulation objectives of a Baker clamp but without dumping excess base drive current into the transistor output circuit. The base drive current of the transistor is sensed and used through an active feedback circuit to produce an error signal which modulates the base drive current through a linearly operating FET. The collector base voltage of the power transistor is independently monitored to develop a second error signal which is also used to regulate base drive current. The current-sensitive circuit operates as a limiter. In addition, a fail-safe timing circuit is disclosed which automatically resets to a turn OFF condition in the event the transistor does not turn ON within a predetermined time after the input signal transition.

  17. Universal power transistor base drive control unit

    DOE Patents [OSTI]

    Gale, A.R.; Gritter, D.J.

    1988-06-07

    A saturation condition regulator system for a power transistor is disclosed which achieves the regulation objectives of a Baker clamp but without dumping excess base drive current into the transistor output circuit. The base drive current of the transistor is sensed and used through an active feedback circuit to produce an error signal which modulates the base drive current through a linearly operating FET. The collector base voltage of the power transistor is independently monitored to develop a second error signal which is also used to regulate base drive current. The current-sensitive circuit operates as a limiter. In addition, a fail-safe timing circuit is disclosed which automatically resets to a turn OFF condition in the event the transistor does not turn ON within a predetermined time after the input signal transition. 2 figs.

  18. Consider Steam Turbine Drives for Rotating Equipment

    SciTech Connect (OSTI)

    Not Available

    2006-01-01

    This revised ITP tip sheet on steam turbine drives for rotating equipment provides how-to advice for improving the system using low-cost, proven practices and technologies.

  19. Adjustable Speed Drive Power Quality Evaluation Program

    E-Print Network [OSTI]

    Strangas, Elias G.

    Unruh from Consumers Power provided technical guidance, while Ms. Heidi Muir from Demand Side Management and managed by Detroit Edi- son, Consumers Power and Drive manufacturers to evaluate the operational charac

  20. Evolution: Geology and climate drive diversification

    E-Print Network [OSTI]

    Gillespie, RG; Roderick, GK

    2014-01-01

    on 7 May 2014. EVO LU TI O N Geology and climate driveIslands exemplify how geology and climate can interact toevents, the dynamics of geology and climate can be powerful

  1. Solid State AC Motor Drives - Conservation Perspectives 

    E-Print Network [OSTI]

    Mohan, N.; Ferraro, R. J.

    1982-01-01

    Variable Frequency Solid-State Inverters: can control the speed of ac motors by producing adjustable frequency ac voltage, with an enormous potential for energy conservation in pumps and air handling systems. 3. Other Variable Frequency Drives: include...

  2. 101 Innovation Drive San Jose, CA 95134

    E-Print Network [OSTI]

    Moshovos, Andreas

    101 Innovation Drive San Jose, CA 95134 www.altera.com Nios II Processor Reference Handbook NII5V1 applications, maskwork rights, and copyrights. Altera warrants performance of its semiconductor products ........................................................................... ix About This Handbook

  3. Jefferson Lab Visitor's Center - Driving in Virginia

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Driving in virginia Effective January 1, 2004, all applicants for a driver's license or photo ID card must show proof of U.S. Citizenship or Legal Presence in the United States. A...

  4. Shared Authority Concerns in Automated Driving Applications

    E-Print Network [OSTI]

    Cummings, M.L.

    2014-05-13

    Given the move toward driverless cars, which includes the more short-term goal of driving assistance, what the appropriate shared authority and interaction paradigms should be between human drivers and the automation remains ...

  5. Fuel Economy: What Drives Consumer Choice?

    E-Print Network [OSTI]

    Turrentine, Tom; Kurani, Kenneth; Heffner, Rusty

    2007-01-01

    S. Kurani, “Car Buyers and Fuel Economy? ” Energy Policy,Fuel Economy: What Drives Consumer Choice? BY TOMa car, do they think about fuel costs over time, are they

  6. Frequency modulation drive for a piezoelectric motor

    DOE Patents [OSTI]

    Mittas, Anthony (Albuquerque, NM)

    2001-01-01

    A piezoelectric motor has peak performance at a specific frequency f.sub.1 that may vary over a range of frequencies. A drive system is disclosed for operating such a motor at peak performance without feedback. The drive system consists of the motor and an ac source connected to power the motor, the ac source repeatedly generating a frequency over a range from f.sub.1 -.DELTA.x to f.sub.1 +.DELTA.y.

  7. Direct-drive field actuator motors

    DOE Patents [OSTI]

    Grahn, A.R.

    1995-07-11

    A high-torque, low speed, positive-drive field actuator motor is disclosed including a stator carrying at least one field actuator which changes in dimension responsive to application of an energy field, and at least one drive shoe movable by the dimensional changes of the field actuator to contact and move a rotor element with respect to the stator. Various embodiments of the motor are disclosed, and the rotor element may be moved linearly or arcuately. 37 figs.

  8. Direct-drive field actuator motors

    DOE Patents [OSTI]

    Grahn, Allen R. (Salt Lake City, UT)

    1995-01-01

    A high-torque, low speed, positive-drive field actuator motor including a stator carrying at least one field actuator which changes in dimension responsive to application of an energy field, and at least one drive shoe movable by the dimensional changes of the field actuator to contact and move a rotor element with respect to the stator. Various embodiments of the motor are disclosed, and the rotor element may be moved linearly or arcuately.

  9. High-Temperature, Air-Cooled Traction Drive Inverter Packaging...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Temperature, Air-Cooled Traction Drive Inverter Packaging High-Temperature, Air-Cooled Traction Drive Inverter Packaging 2010 DOE Vehicle Technologies and Hydrogen Programs Annual...

  10. US DRIVE Electrochemical Energy Storage Technical Team Roadmap...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electrochemical Energy Storage Technical Team Roadmap US DRIVE Electrochemical Energy Storage Technical Team Roadmap This U.S. DRIVE electrochemical energy storage roadmap...

  11. Countries Launch Initiative to Drive Energy Efficiency in the...

    Office of Environmental Management (EM)

    Countries Launch Initiative to Drive Energy Efficiency in the Commercial and Industrial Sectors Countries Launch Initiative to Drive Energy Efficiency in the Commercial and...

  12. How Exhaust Emissions Drive Diesel Engine Fuel Efficiency | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    How Exhaust Emissions Drive Diesel Engine Fuel Efficiency How Exhaust Emissions Drive Diesel Engine Fuel Efficiency 2004 Diesel Engine Emissions Reduction (DEER) Conference...

  13. Strategies for Marketing and Driving Demand for Commercial Financing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Strategies for Marketing and Driving Demand for Commercial Financing Products Strategies for Marketing and Driving Demand for Commercial Financing Products Better Buildings...

  14. Improving Motor and Drive System Performance - A Sourcebook for...

    Broader source: Energy.gov (indexed) [DOE]

    sourcebook outlines opportunities to improve motor and drive systems performance. The sourcebook is divided into four main sections: Motor and Drive System Basics: Summarizes...

  15. Computer-Aided Engineering for Electric Drive Vehicle Batteries...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Computer-Aided Engineering for Electric Drive Vehicle Batteries (CAEBAT) Computer-Aided Engineering for Electric Drive Vehicle Batteries (CAEBAT) 2011 DOE Hydrogen and Fuel Cells...

  16. Electric Drive Component Manufacturing: Magna E-Car Systems of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Electric Drive Component Manufacturing: Magna E-Car Systems of America, Inc. Electric Drive Component Manufacturing: Magna E-Car Systems of...

  17. Defining Real World Drive Cycles to Support APRF Technology Evaluation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Real World Drive Cycles to Support APRF Technology Evaluations Defining Real World Drive Cycles to Support APRF Technology Evaluations 2012 DOE Hydrogen and Fuel Cells Program and...

  18. High-Voltage Solid Polymer Batteries for Electric Drive Vehicles...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solid Polymer Batteries for Electric Drive Vehicles High-Voltage Solid Polymer Batteries for Electric Drive Vehicles 2012 DOE Hydrogen and Fuel Cells Program and Vehicle...

  19. Tips: Buying and Driving Fuel Efficient and Alternative Fuel...

    Office of Environmental Management (EM)

    & Fuel Vehicles & Fuels Tips: Buying and Driving Fuel Efficient and Alternative Fuel Vehicles Tips: Buying and Driving Fuel Efficient and Alternative Fuel Vehicles...

  20. Airlines & Aviation Alternative Fuels: Our Drive to Be Early...

    Energy Savers [EERE]

    Airlines & Aviation Alternative Fuels: Our Drive to Be Early Market Adopters Airlines & Aviation Alternative Fuels: Our Drive to Be Early Market Adopters Plenary III: Early Market...

  1. Heavy Duty & Medium Duty Drive Cycle Data Collection for Modeling...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Heavy Duty & Medium Duty Drive Cycle Data Collection for Modeling Expansion Heavy Duty & Medium Duty Drive Cycle Data Collection for Modeling Expansion 2009 DOE Hydrogen Program...

  2. Light-Duty Reactivity Controlled Compression Ignition Drive Cycle...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Light-Duty Reactivity Controlled Compression Ignition Drive Cycle Fuel Economy and Emissions Estimates Light-Duty Reactivity Controlled Compression Ignition Drive Cycle Fuel...

  3. Electric Drive and Advanced Battery and Components Testbed (EDAB...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    vss033carlson2011o.pdf More Documents & Publications Electric Drive and Advanced Battery and Components Testbed (EDAB) Electric Drive and Advanced Battery and Components...

  4. Ageing studies on small Thin Gap Chambers for the ATLAS New Small Wheel

    E-Print Network [OSTI]

    Gignac, Matthew; The ATLAS collaboration

    2015-01-01

    The instantaneous luminosity of the Large Hadron Collider at CERN will be increased up to a factor of five with respect to the design value by undergoing an extensive upgrade program over the coming decade. The largest upgrade project for the ATLAS Muon System is the replacement of the present first station in the forward regions with the so-called New Small Wheels (NSWs), to be installed during the LHC long shutdown in 2018/19. Small-Strip Thin Gap Chambers (sTGC) detectors are one chosen technology to provide fast trigger and high precision muon tracking under the high luminosity LHC conditions. We study ageing effects of sTGC detectors with a gas mixture of 55% of CO2 and 45% of n-pentane. A sTGC detector was irradiated with beta-rays from a Sr-90 source. Three different gas flow rates were tested. We observed no deterioration on pulse height of the sTGC up to an accumulated charge of 6.7 C/cm.

  5. Virtual Driving and Eco-Simulation VR City Modeling, Drive Simulation, and Ecological Habits

    E-Print Network [OSTI]

    @asu.edu Keywords: Drive Simulation, Traffic Visualization, Virtual Reality, Driving Behavior, Vehicle Emissions behavior, and vehicle emissions. The project is a part of an interdisciplinary multi- year academic Simulator is illustrated. A research study of driver behavior and vehicle emissions is detailed. Next

  6. Flow Cytometry Laboratory 7703 Floyd Curl Drive

    E-Print Network [OSTI]

    Nicholson, Bruce J.

    Flow Cytometry Laboratory 7703 Floyd Curl Drive San Antonio, Tx. 78229 Customer Satisfaction Survey Dear UTHSCSA Flow Cytometry Laboratory User: As a College of American Pathologist (CAP) accredited Laboratory, the UTHSCSA Flow Cytometry Laboratory is sending this survey to our client as an aid in our

  7. Oscillation control system for electric motor drive

    DOE Patents [OSTI]

    Slicker, James M. (Union Lake, MI); Sereshteh, Ahmad (Union Lake, MI)

    1988-01-01

    A feedback system for controlling mechanical oscillations in the torsionally complaint drive train of an electric or other vehicle. Motor speed is converted in a processor to estimate state signals in which a plant model which are used to electronically modify thetorque commands applied to the motor.

  8. Cost of transitionless driving and work output

    E-Print Network [OSTI]

    Yuanjian Zheng; Steve Campbell; Gabriele De Chiara; Dario Poletti

    2015-09-07

    Unitary processes allow for the transfer of work to and from Hamiltonian systems. However, to achieve non-zero power for the practical extraction of work, these processes must be performed within a finite-time, which inevitably induces excitations in the system. We characterize this by introducing a measure that indicates the need for an external driving to preserve quantum adiabaticity. We show that depending on the time-scale of the process and the physical realization of the external driving employed, the use of transitionless quantum driving (TQD) to extract more work is not always effective. Furthermore, by virtue of the two-time energy measurement definition of quantum work, we also demonstrate that the cost of TQD can be significantly reduced by selecting a restricted form of the driving Hamiltonian that depends on the outcome of the first energy measurement. We apply our analysis to systems ranging from a two-level Landau-Zener problem to a many-body quantum Ising chain.

  9. Oscillation control system for electric motor drive

    DOE Patents [OSTI]

    Slicker, J.M.; Sereshteh, A.

    1988-08-30

    A feedback system for controlling mechanical oscillations in the torsionally complaint drive train of an electric or other vehicle. Motor speed is converted in a processor to estimate state signals in which a plant model which are used to electronically modify the torque commands applied to the motor. 5 figs.

  10. What drives option prices? Frdric Abergel1

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    . The study reveals that while the modeling of stochastic volatility gives more robust models, the market does 2 Theoretical framework 4 3 Intraday joint dynamics of option and underlying prices 5 3.1 EppsWhat drives option prices? Frédéric Abergel1 and Riadh Zaatour2 Chair of Quantitative Finance Ecole

  11. Modeling and Driving Piezoelectric Resonant Blade Elements

    E-Print Network [OSTI]

    Modeling and Driving Piezoelectric Resonant Blade Elements Sam Ben-Yaakov* and Natan Krihely Power@ee.bgu.ac.il ; Website: http://www.ee.bgu.ac.il/~pel Abstract-- Piezoelectric Resonant Blade elements (PRB) are useful in applications such as light choppers, laser beam scanners, fans and others. Three methods are proposed

  12. What's Driving Oil Prices? James L. Smith

    E-Print Network [OSTI]

    O'Donnell, Tom

    1 What's Driving Oil Prices? James L. Smith Cary M. Maguire Chair in Oil & Gas Management Critical Issues in Energy Federal Reserve Bank of Dallas November 2, 2006 The Price of OPEC Oil ($/bbl) $0 $20 $40 $60 $80 1970 1975 1980 1985 1990 1995 2000 2005 Real Price ($2005) #12;2 Hubbert's Curve (Peak Oil

  13. Drive piston assembly for a valve actuator assembly

    DOE Patents [OSTI]

    Sun, Zongxuan (Troy, MI)

    2010-02-23

    A drive piston assembly is provided that is operable to selectively open a poppet valve. The drive piston assembly includes a cartridge defining a generally stepped bore. A drive piston is movable within the generally stepped bore and a boost sleeve is coaxially disposed with respect to the drive piston. A main fluid chamber is at least partially defined by the generally stepped bore, drive piston, and boost sleeve. First and second feedback chambers are at least partially defined by the drive piston and each are disposed at opposite ends of the drive piston. At least one of the drive piston and the boost sleeve is sufficiently configured to move within the generally stepped bore in response to fluid pressure within the main fluid chamber to selectively open the poppet valve. A valve actuator assembly and engine are also provided incorporating the disclosed drive piston assembly.

  14. "It's Like Giving Us a Car, Only Without the Wheels": Performance of Latina Students at an Early College High School 

    E-Print Network [OSTI]

    Locke, Leslie Ann

    2012-02-14

    School. (December 2011) Leslie Ann Locke, B.S.; M.L.S, University of Minnesota?Twin Cities Chair of Advisory Committee: Dr. Kathryn McKenzie This dissertation presents the results from an empirical study of the perspectives of Latina students who... ?IT?S LIKE GIVING US A CAR, ONLY WITHOUT THE WHEELS?: PERFORMANCE OF LATINA STUDENTS AT AN EARLY COLLEGE HIGH SCHOOL A Dissertation by LESLIE ANN LOCKE Submitted to the Office of Graduate Studies of Texas A&M University...

  15. Mechanism of Preferential Adsorption of SO2 into Two Microporous Paddle Wheel Frameworks M(bdc)(ted)(0.5)

    SciTech Connect (OSTI)

    Tan, Kui; Canepa, Pieremanuele; Gong, Qihan; Liu, Jian; Johnson, Daniel H.; Dyevoich, Allison A.; Thallapally, Praveen K.; Thonhauser, Timo; Li, Jing; Chabal, Y. J.

    2013-12-02

    The adsorption of a corrosive gas, SO¬2, into microporous pillared paddle-wheel frameworks M(bdc)(ted)0.5 [M = Ni, , Zn; bdc = 1,4-benzenedicarboxylate; ted=triethylenediamine] is studied by volumetric adsorption measurements and a combination of in-situ infrared spectroscopy and ab initio density functional theory (DFT) calculations. The uptake of SO2 in M(bdc)(ted)0.5 at room temperature is quite significant, 9.966 mol kg-1(63.8%) at room temperature/1.132 bar, which represents the highest SO2 uptake so far observed. Two different adsorption species are identified by infrared spectroscopy: one is typical physisorbed SO2 species, charac-terized by a modest red shift of S-O stretching bands (36 cm-1 for ?as and 7 cm-1 for ?s); the other characterized by adsorption bands at 1242 and 1105cm-1 and by a much higher (~150?C) temperature to completely remove. Theoretical calculations including van der Waals interactions (based on vdW-DF) indicate that the adsorption geometry of SO2 involves one molecule bonding of its sulfur atom to the oxygen atom of the paddle-wheel building unit and its two oxygen atoms to the C-H groups of the organic linkers by formation of hydrogen bonds. Such a configuration results in a large distortion of benzene rings, which is consistent with the experimentally observed shift of the ring deformation mode. The simulated frequency shift of the SO2 stretching bands by vdW-DF is in excellent agreement with spectroscopically measured value of physisorbed SO2. The IR absorptions at 1242 and 1105 cm-1 also suggest a stronger adsorption configuration, previously observed in SO4-like species involving two oxygen atoms of the paddle wheel building units. The adsorption configurations of SO2 into M(bdc)(ted)0.5 derived by infrared spectroscopy and vdW-DF calculations provide the understanding necessary to develop industrial processes for SO2 removal using microporous paddle-wheel frameworks materials.

  16. Integrated Inverter For Driving Multiple Electric Machines

    DOE Patents [OSTI]

    Su, Gui-Jia [Knoxville, TN; Hsu, John S [Oak Ridge, TN

    2006-04-04

    An electric machine drive (50) has a plurality of inverters (50a, 50b) for controlling respective electric machines (57, 62), which may include a three-phase main traction machine (57) and two-phase accessory machines (62) in a hybrid or electric vehicle. The drive (50) has a common control section (53, 54) for controlling the plurality of inverters (50a, 50b) with only one microelectronic processor (54) for controlling the plurality of inverters (50a, 50b), only one gate driver circuit (53) for controlling conduction of semiconductor switches (S1-S10) in the plurality of inverters (50a, 50b), and also includes a common dc bus (70), a common dc bus filtering capacitor (C1) and a common dc bus voltage sensor (67). The electric machines (57, 62) may be synchronous machines, induction machines, or PM machines and may be operated in a motoring mode or a generating mode.

  17. Heating and current drive systems for TPX

    SciTech Connect (OSTI)

    Swain, D.; Goranson, P.; Halle, A. von; Bernabei, S.; Greenough, N.

    1994-05-24

    The heating and current drive (H and CD) system proposed for the TPX tokamak will consist of ion cyclotron, neutral beam, and lower hybrid systems. It will have 17.5 MW of installed H and CD power initially, and can be upgraded to 45 MW. It will be used to explore advanced confinement and fully current-driven plasma regimes with pulse lengths of up to 1,000 s.

  18. Traction Drive Systems Breakout | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCEDInstallers/ContractorsPhotovoltaicsState ofSavings forTitle XVIIofTracers andTraction Drive

  19. Quasi-spherical direct drive fusion.

    SciTech Connect (OSTI)

    VanDevender, J. Pace; Abbott, Lucas M.; Langston, William L.; McDaniel, Dillon Heirman; Nash, Thomas J.; Roderick, Norman Frederick; Silva, M.

    2007-01-01

    The authors present designs of quasi-spherical direction drive z-pinch loads for machines such as ZR at 28 MA load current with a 150 ns implosion time (QSDDI). A double shell system for ZR has produced a 2D simulated yield of 12 MJ, but the drive for this system on ZR has essentially no margin. A double shell system for a 56 MA driver at 150 ns implosion has produced a simulated yield of 130 MJ with considerable margin in attaining the necessary temperature and density-radius product for ignition. They also represent designs for a magnetically insulated current amplifier, (MICA), that modify the attainable ZR load current to 36 MA with a 28 ns rise time. The faster pulse provided by a MICA makes it possible to drive quasi-spherical single shell implosions (QSDD2). They present results from 1D LASNEX and 2D MACH2 simulations of promising low-adiabat cryogenic QSDD2 capsules and 1D LASNEX results of high-adiabat cryogenic QSDD2 capsules.

  20. Indianapolis Offers a Lesson on Driving Demand | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Indianapolis Offers a Lesson on Driving Demand Indianapolis Offers a Lesson on Driving Demand The flier for EcoHouse, with the headline 'Save energy, save money, improve your home'...

  1. An Optimization Model for Eco-Driving at Signalized Intersection 

    E-Print Network [OSTI]

    Chen, Zhi

    2013-07-15

    This research develops an optimization model for eco-driving at signalized intersection. In urban areas, signalized intersections are the “hot spots” of air emissions and have significant negative environmental and health impacts. Eco-driving is a...

  2. Secrets of the Motor That Drives Archaea Revealed

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Secrets of the Motor That Drives Archaea Revealed Secrets of the Motor That Drives Archaea Revealed Print Thursday, 14 February 2013 00:00 An international team led by John Tainer...

  3. Energy Department Announces $53 Million to Drive Innovation,...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    53 Million to Drive Innovation, Cut Cost of Solar Power Energy Department Announces 53 Million to Drive Innovation, Cut Cost of Solar Power October 22, 2014 - 1:15am Addthis News...

  4. Fast shadow detection for urban autonomous driving applications

    E-Print Network [OSTI]

    Park, Sooho

    This paper presents shadow detection methods for vision-based autonomous driving in an urban environment. Shadows misclassified as objects create problems in autonomous driving applications. Real-time efficient algorithms ...

  5. Energy Department Announces New Prize Challenge to Drive Down...

    Office of Environmental Management (EM)

    Prize Challenge to Drive Down Solar Costs Energy Department Announces New Prize Challenge to Drive Down Solar Costs May 20, 2014 - 12:34pm Addthis To kick off the SunShot...

  6. Utilizing the Traction Drive Power Electronics System to Provide...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Traction Drive Power Electronics System to Provide Plug-in Capability for PHEVs Utilizing the Traction Drive Power Electronics System to Provide Plug-in Capability for PHEVs 2009...

  7. How to Avoid Overestimating Variable Speed Drive Savings 

    E-Print Network [OSTI]

    Maxwell, J. B.

    2005-01-01

    of Magnetically Coupled Adjustable Speed Drive Systems, Pacific Northwest National Laboratory, PNNL-13879, June 2002. 9. Electric Power Research Institute, Title and date unknown, PR I966-241, as cited in "Adjustable Speed Drives" section of "Industrial...

  8. Fact #759: December 24, 2012 Rural vs. Urban Driving Differences

    Broader source: Energy.gov [DOE]

    According to the National Household Travel Survey, those living in rural areas drive ten more miles in a day than those who live in cities. People living in the suburbs drive only about three to...

  9. DVM Admissions Office (0442) 245 Duck Pond Drive

    E-Print Network [OSTI]

    DVM Admissions Office (0442) 245 Duck Pond Drive Blacksburg, VA 24061 Phone: 540-231-4699 Fax: 540 June 30, 2016 #12;DVM Admissions Office (0442) 245 Duck Pond Drive Blacksburg, VA 24061 Phone: 540

  10. Economical Aspects of Adjustable Speed Drives in Pumping Systems 

    E-Print Network [OSTI]

    Hovstadius, G.

    1999-01-01

    Speed variations of pumps have become increasingly popular as the technology to produce variable frequency drives has progressed. Variable speed drives have many advantages compared to throttle valves when it comes to regulation of flow. They offer...

  11. DRIVE(tm) Mobile App | Open Energy Information

    Open Energy Info (EERE)

    handle all of the details related to sending incentives, provide real time status of offer accepts, and validate points earned. The DRIVE System includes the DRIVE App as a fun...

  12. Columbia Power Technologies, Inc. Deploys its Direct Drive Wave...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Columbia Power Technologies, Inc. Deploys its Direct Drive Wave Energy Buoy Columbia Power Technologies, Inc. Deploys its Direct Drive Wave Energy Buoy April 9, 2013 - 12:00am...

  13. Homodyne target tracking for direct drive laser inertial fusion

    E-Print Network [OSTI]

    Spalding, Jon David

    2009-01-01

    direct drive inertial confinement fusion experiments, asto be used in >>>Inertial Confinement Fusion, as a means of

  14. Current Drive in a Ponderomotive Potential with Sign Reversal

    SciTech Connect (OSTI)

    N.J. Fisch; J.M. Rax; I.Y. Dodin

    2003-07-30

    Noninductive current drive can be accomplished through ponderomotive forces with high efficiency when the potential changes sign over the interaction region. The effect can practiced upon both ions and electrons. The current drive efficiencies, in principle, might be higher than those possible with conventional radio-frequency current-drive techniques, since different considerations come into play.

  15. Gears and Belt Drives for Non-Uniform Transmission

    E-Print Network [OSTI]

    Nawratil, Georg

    Gears and Belt Drives for Non-Uniform Transmission Hellmuth Stachel Abstract Ordinarily, gears and belt drives are used for uniform transmission of rotations between parallel axes. Here we focus. Concerning belt drives, we study their relation to tooth profiles and focus on `strict' cases which work

  16. Comparing Two Types of Magnetically- Coupled Adjustable Speed Drives with Variable Frequency Drives in Pump and Fan Applications 

    E-Print Network [OSTI]

    Anderson, K. J.; Chvala, W. D.

    2003-01-01

    This paper presents the results from laboratory tests on MagnaDrive Corporations fixed-magnet magnetically-coupled adjustable speed drive (MC-ASD) and Coyote Electronics electromagnetic MC-ASD as compared to a typical variable frequency drive (VFD...

  17. Well-to-wheels analysis of fast pyrolysis pathways with the GREET model.

    SciTech Connect (OSTI)

    Han, J.; Elgowainy, A.; Palou-Rivera, I.; Dunn, J.B.; Wang, M.Q.

    2011-12-01

    The pyrolysis of biomass can help produce liquid transportation fuels with properties similar to those of petroleum gasoline and diesel fuel. Argonne National Laboratory conducted a life-cycle (i.e., well-to-wheels [WTW]) analysis of various pyrolysis pathways by expanding and employing the Greenhouse Gases, Regulated Emissions, and Energy Use in Transportation (GREET) model. The WTW energy use and greenhouse gas (GHG) emissions from the pyrolysis pathways were compared with those from the baseline petroleum gasoline and diesel pathways. Various pyrolysis pathway scenarios with a wide variety of possible hydrogen sources, liquid fuel yields, and co-product application and treatment methods were considered. At one extreme, when hydrogen is produced from natural gas and when bio-char is used for process energy needs, the pyrolysis-based liquid fuel yield is high (32% of the dry mass of biomass input). The reductions in WTW fossil energy use and GHG emissions relative to those that occur when baseline petroleum fuels are used, however, is modest, at 50% and 51%, respectively, on a per unit of fuel energy basis. At the other extreme, when hydrogen is produced internally via reforming of pyrolysis oil and when bio-char is sequestered in soil applications, the pyrolysis-based liquid fuel yield is low (15% of the dry mass of biomass input), but the reductions in WTW fossil energy use and GHG emissions are large, at 79% and 96%, respectively, relative to those that occur when baseline petroleum fuels are used. The petroleum energy use in all scenarios was restricted to biomass collection and transportation activities, which resulted in a reduction in WTW petroleum energy use of 92-95% relative to that found when baseline petroleum fuels are used. Internal hydrogen production (i.e., via reforming of pyrolysis oil) significantly reduces fossil fuel use and GHG emissions because the hydrogen from fuel gas or pyrolysis oil (renewable sources) displaces that from fossil fuel natural gas and the amount of fossil natural gas used for hydrogen production is reduced; however, internal hydrogen production also reduces the potential petroleum energy savings (per unit of biomass input basis) because the fuel yield declines dramatically. Typically, a process that has a greater liquid fuel yield results in larger petroleum savings per unit of biomass input but a smaller reduction in life-cycle GHG emissions. Sequestration of the large amount of bio-char co-product (e.g., in soil applications) provides a significant carbon dioxide credit, while electricity generation from bio-char combustion provides a large energy credit. The WTW energy and GHG emissions benefits observed when a pyrolysis oil refinery was integrated with a pyrolysis reactor were small when compared with those that occur when pyrolysis oil is distributed to a distant refinery, since the activities associated with transporting the oil between the pyrolysis reactors and refineries have a smaller energy and emissions footprint than do other activities in the pyrolysis pathway.

  18. Oscillatory nonohomic current drive for maintaining a plasma current

    DOE Patents [OSTI]

    Fisch, N.J.

    1984-01-01

    Apparatus and methods are described for maintaining a plasma current with an oscillatory nonohmic current drive. Each cycle of operation has a generation period in which current driving energy is applied to the plasma, and a relaxation period in which current driving energy is removed. Plasma parameters, such as plasma temperature or plasma average ionic charge state, are modified during the generation period so as to oscillate plasma resistivity in synchronism with the application of current driving energy. The invention improves overall current drive efficiencies.

  19. Improving Motor and Drive System Performance – A Sourcebook for Industry

    SciTech Connect (OSTI)

    2014-02-01

    This sourcebook outlines opportunities to improve motor and drive systems performance. The sourcebook is divided into four main sections: (1) Motor and Drive System Basics: Summarizes important terms, relationships, and system design considerations relating to motor and drive systems. (2) Performance Opportunity Road Map: Details the key components of well-functioning motor and drive systems and opportunities for energy performance opportunities. (3) Motor System Economics: Offers recommendations on how to propose improvement projects based on corporate priorities, efficiency gains, and financial payback periods. (4) Where to Find Help: Provides a directory of organizations associated with motors and drives, as well as resources for additional information, tools, software, videos, and training opportunities.

  20. Oscillatory nonhmic current drive for maintaining a plasma current

    DOE Patents [OSTI]

    Fisch, Nathaniel J. (Princeton, NJ)

    1986-01-01

    Apparatus and method of the invention maintain a plasma current with an oscillatory nonohmic current drive. Each cycle of operation has a generation period in which current driving energy is applied to the plasma, and a relaxation period in which current driving energy is removed. Plasma parameters, such as plasma temperature or plasma average ionic charge state, are modified during the generation period so as to oscillate plasma resistivity in synchronism with the application of current driving energy. The invention improves overall current drive efficiencies.

  1. Safe Tractor Operation: Driving on Highways 

    E-Print Network [OSTI]

    Smith, David

    2004-09-16

    of the car first notices the tractor while still 400 feet behind it, the driver has less than 10 seconds to avoid a collision with the tractor. In this time, the driver of the car must recognize the danger, determine the speed the tractor is traveling... the brakes, clutch and steering mechanisms, and often cannot see everything around them while sitting in the tractor seat. Don?t put your child in this dangerous situation. Chil- dren should never drive tractors on public roads. Extra Riders Except...

  2. SuperDrive Inc | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Information Serbia-Enhancing CapacityVectren)Model for theSunLanSuperDrive Inc Jump to: navigation,

  3. Direct Drive Systems DDS | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTIONRobertsdale, Alabama (UtilityInstrumentsArea (DOE GTP) JumpDillard Road SolarEngineeringDirect Drive

  4. National Drive Electric Week | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergy AEnergy Managing SwimmingMicrosoft TheDepartmentNational Drive Electric Week

  5. Hyper Drive Ltd | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsource History View NewGuam:on Openei | Open Energy InformationHydrothermalDrive Ltd

  6. Electrifying Your Drive | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based|DepartmentStatementofAprilof Energy 2ofU.S.Electrifying Your Drive

  7. MASSACHUSETTS DRIVES PERFORMANCE MEASUREMENT | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergyInterested Parties - WAPA PublicLED1,400 Jobs |Inc. |EnergyMASSACHUSETTS DRIVES

  8. GenDrive Limited | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LIST OFAMERICA'SHeavy ElectricalsFTL SolarGate Solar Jump to:GenDrive Limited Jump to:

  9. Driving the Future | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalentLaboratory |Sectorfor $1.14 Per Gallon Driving for $1.14

  10. Has Driving Come to a Halt?

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets See full Genealogy ofFederalHas Driving

  11. Google Drive for Work | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data CenterFinancial OpportunitiesDepartment of Energy SmallGoogle Drive for

  12. Terramechanical analysis of rover wheel mobility over simulated Martian terrain at various slip conditions and vertical loads

    E-Print Network [OSTI]

    Puszko, Gregory D

    2013-01-01

    Unmanned Mars rovers are presented with the unique challenge of requiring autonomous driving control over rough, adverse territory. A software package, dubbed Artemis, was developed in order to model the expected forces ...

  13. VIRTUAL REALITY DRIVING SIMULATION: Integrating Infrastructure Plans, Traffic Models, and Driving Behaviors

    E-Print Network [OSTI]

    to include 3D models, animated traffic and human characters, as well as functions that allow users to take-1- VIRTUAL REALITY DRIVING SIMULATION: Integrating Infrastructure Plans, Traffic Models@forum8.co.jp Summary: This paper presents a virtual reality (VR) system that enables large

  14. Optimization Control Strategy for an Air Handling Unit with Dedicated Rotary Desiccant Dehumidification Wheel in Hot and Humid Climate 

    E-Print Network [OSTI]

    Watt, J.

    2013-01-01

    STRATEGY FOR AN AIR HANDLING UNIT WITH DEDICATED ROTARY DESICCANT DEHUMIDIFICATION WHEEL IN HOT & HUMID CLIMATE Jim Watt Montr?al, Qu?bec October 8, 2013 Outline ? Background ? Introduction?of?desiccant?dehumidification? process ? Mathematical...?Sorption?Process Model?calibration HCU1 HCU2 DB(?F) WB(?F) DB(?F) WB(?F) Inlet 52 52 50 50 Design?outlet 70 54.9 69 53.2 Model?outlet 70.7 55.1 69.7 53.5 Error 0.94% 0.42% 1.03% 0.47% DESCRIPTION?OF?DEDICATED?HUMIDITY? CONTROL?UNITS?(HCU) Run#?1?DESIGN R A W B C...

  15. Electric-drive tractability indicator integrated in hybrid electric vehicle tachometer

    DOE Patents [OSTI]

    Tamai, Goro; Zhou, Jing; Weslati, Feisel

    2014-09-02

    An indicator, system and method of indicating electric drive usability in a hybrid electric vehicle. A tachometer is used that includes a display having an all-electric drive portion and a hybrid drive portion. The all-electric drive portion and the hybrid drive portion share a first boundary which indicates a minimum electric drive usability and a beginning of hybrid drive operation of the vehicle. The indicated level of electric drive usability is derived from at least one of a percent battery discharge, a percent maximum torque provided by the electric drive, and a percent electric drive to hybrid drive operating cost for the hybrid electric vehicle.

  16. Interactions between Electric-drive Vehicles and the Power Sector in California

    E-Print Network [OSTI]

    McCarthy, Ryan; Yang, Christopher; Ogden, Joan M.

    2009-01-01

    by 50% and average vehicle emissions rates by up to 35%.compares well-to-wheel vehicle emissions for various vehicleand compares WTW vehicle emissions for various vehicle and

  17. Vehicle drive module having improved terminal design

    DOE Patents [OSTI]

    Beihoff, Bruce C.; Radosevich, Lawrence D.; Phillips, Mark G.; Kehl, Dennis L.; Kaishian, Steven C.; Kannenberg, Daniel G.

    2006-04-25

    A terminal structure for vehicle drive power electronics circuits reduces the need for a DC bus and thereby the incidence of parasitic inductance. The structure is secured to a support that may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. The support may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as by direct contact between the terminal assembly and AC and DC circuit components. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  18. Vehicle drive module having improved cooling configuration

    DOE Patents [OSTI]

    Radosevich, Lawrence D.; Meyer, Andreas A.; Kannenberg, Daniel G.; Kaishian, Steven C.; Beihoff, Bruce C.

    2007-02-13

    An electric vehicle drive includes a thermal support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. Power electronic circuits are thermally matched, such as between component layers and between the circuits and the support. The support may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  19. Simulations for CLIC Drive Beam Linac

    E-Print Network [OSTI]

    Avni Aksoy

    2012-02-25

    The Drive Beam Linac of the Compact Linear Collider (CLIC) has to accelerate an electron beam with 4.2 A up to 2.4 GeV in almost fully-loaded structures. The pulse contains about 70000 bunches, one in every second rf bucket, and has a length of 140 $\\mu$s. The beam stability along the beamline is of concern for such a high current and pulse length. We present different options for the lattice of the linac based on FODO, triplet and doublet cells and compare the transverse instability for each lattice including the effects of beam jitter, alignment and beam-based correction. Additionally longitudinal stability is discussed for different bunch compressors using FODO type of lattice.

  20. Vehicle drive module having improved EMI shielding

    DOE Patents [OSTI]

    Beihoff, Bruce C.; Kehl, Dennis L.; Gettelfinger, Lee A.; Kaishian, Steven C.; Phillips, Mark G.; Radosevich, Lawrence D.

    2006-11-28

    EMI shielding in an electric vehicle drive is provided for power electronics circuits and the like via a direct-mount reference plane support and shielding structure. The thermal support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. The support forms a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  1. A FORMULA FOR EFFICIENCY OF FAST WAVE CURRENT DRIVE

    E-Print Network [OSTI]

    Karney, Charles

    A FORMULA FOR EFFICIENCY OF FAST WAVE CURRENT DRIVE IN FUSION DEVICES S.C. CHIU, C.F.F. KARNEY,* R://charles.karney.info/biblio/chiu92.html #12;Chiu e t al. 4 FORMULA FOR EFFICIENCY OF FAST WAVE CURRENT DRIVE IN FUSION DEVICES A FORMULA FOR EFFICIENCY OF FAST WAVE CURRENT DRIVE IN FUSION DEVICES* S.C. CHIU,C.F.F. KARNEY,~R.W. HARVEY

  2. A motor drive control system for the Lidar Polarimeter 

    E-Print Network [OSTI]

    Leung, Waiming

    1977-01-01

    A MOTOR DRIVE CONTROL SYSTEM FOR THE LIDAR POLARIMETER A Thesis by Waiming Leung Submitted to the Graduate College of Texas A/M University in partial fulfillment of the requirement for the degree of MASTER OF SCIENCF, May 1977 Major... Subject: Electrical Engineering A MOTOR DRIVE CONTROL SYSTEM FOR THE LIDAR POLARIMETER A Thesis by Waiming Leung Approved as to style and content by: Chairman o Comm' ee ea o epartment Member Mem er May 1977 ABSTRACT A Motor Drive Control...

  3. The Drive for Energy Diversity and Sustainability: The Impact...

    Broader source: Energy.gov (indexed) [DOE]

    program - driving unleaded gasoline nationwide in US 1970: GM introduces no lead tolerant engines on all 1971 models in US & Canada 3 Transportation is a growth industry...

  4. Vehicle Technologies Office: U.S. DRIVE 2014 Technical Accomplishments...

    Office of Environmental Management (EM)

    Energy Storage R&D Annual Progress Report US DRIVE Electrochemical Energy Storage Technical Team Roadmap Vehicle Technologies Office: 2010 Energy Storage R&D Annual Progress Report...

  5. Vehicle Technologies Office: US DRIVE Materials Technical Team...

    Broader source: Energy.gov (indexed) [DOE]

    vehicle efficiency regardless of the vehicle size or propulsion system employed. This roadmap lays out the future direction for this research. U.S. DRIVE Materials Technical Team...

  6. Adjustable-Speed Drives for 500 to 4000 Horsepower Industrial...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    thereby controlling the amount of torque transmitted. Eliminates the transmission of vibration across the drive due to the air gap configuration. Benefits Productivity Eliminates...

  7. Electric Drive Vehicle Level Control Development Under Various...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Level Control Development Under Various Thermal Conditions Electric Drive Vehicle Level Control Development Under Various Thermal Conditions 2012 DOE Hydrogen and Fuel Cells...

  8. Strategies for Marketing and Driving Demand for Commercial Financing...

    Broader source: Energy.gov (indexed) [DOE]

    Financing and Commercial Peer Exchange Call: Strategies for Marketing and Driving Demand for Commercial Financing Products, Call Slides and Discussion Summary, February 2, 2012....

  9. Using Partnerships to Drive Demand and Provide Services in Communities...

    Broader source: Energy.gov (indexed) [DOE]

    Program Multifamily and Low-Income Peer Exchange Call: Using Partnerships to Drive Demand and Provide Services in Communities, February 2, 2012. Call Slides and Discussion...

  10. Better Buildings Residential Network Driving Demand Peer Exchange...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Driving Demand Peer Exchange Call Series: Leveraging Holidays and Other Events Call Slides and Discussion Summary November 7, 2013 Agenda Call Logistics and Introductions ...

  11. X-Ray Microscopy Reveals How Crystal Mechanics Drive Battery...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Microscopy Reveals How Crystal Mechanics Drive Battery Performance Print Rechargeable lithium-ion batteries power most portable electronics and are becoming more widely used in...

  12. Medium- and Heavy-Duty Electric Drive Vehicle Simulation and...

    Broader source: Energy.gov (indexed) [DOE]

    Meeting vss043gonder2012o.pdf More Documents & Publications Medium- and Heavy-Duty Electric Drive Vehicle Simulation and Analysis Battery Pack Requirements and Targets...

  13. Factors driving wind power development in the United States

    E-Print Network [OSTI]

    Bird, Lori A.; Parsons, Brian; Gagliano, Troy; Brown, Matthew H.; Wiser, Ryan H.; Bolinger, Mark

    2003-01-01

    s Largest Purchase of Wind Power,” September 17, 2001.FACTORS DRIVING WIND POWER DEVELOPMENT IN THE UNITED STATESthe United States third in wind power capacity globally,

  14. Adaptive Rejection of Narrow Band Disturbance in Hard Disk Drives

    E-Print Network [OSTI]

    Zheng, Qixing

    2009-01-01

    on Advanced Intelligent Mechatronics, Monterey, CA, pp.13-C. Bi. Hard Disk Drive: Mechatronics and Control. CRC Press,new servo method in mechatronics. Trans. Of Japanese Society

  15. Phonon localization drives nanoregions in a relaxor ferroelectric...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    localization drives nanoregions in a relaxor ferroelectric April 11, 2014 This inelastic neutron scattering spectrum shows the localizing modes (LMs) between the transverse optic...

  16. Multi-function magnetic jack control drive mechanism

    DOE Patents [OSTI]

    Bollinger, L.R.; Crawford, D.C.

    1983-10-06

    A multi-function magnetic jack control drive mechanism for controlling a nuclear reactor is provided. The mechanism includes an elongate pressure housing in which a plurality of closely spaced drive rods are located. Each drive rod is connected to a rod which is insertable in the reactor core. An electromechanical stationary latch device is provided which is actuatable to hold each drive rod stationary with respect to the pressure housing. An electromechanical movable latch device is also provided for each one of the drive rods. Each movable latch device is provided with a base and is actuatable to hold a respective drive rod stationary with respect to the base. An electromechanical lift device is further provided for each base which is actuatable for moving a respective base longitudinally along the pressure housing. In this manner, one or more drive rods can be moved in the pressure housing by sequentially and repetitively operating the electromechanical devices. Preferably, each latch device includes a pair of opposed latches which grip teeth located on the respective drive rod. Two, three, or four drive rods can be located symmetrically about the longitudinal axis of the pressure housing.

  17. Multi-function magnetic jack control drive mechanism

    DOE Patents [OSTI]

    Bollinger, Lawrence R. (Schenectady, NY); Crawford, Donald C. (Scotia, NY)

    1986-01-01

    A multi-function magnetic jack control drive mechanism for controlling a nuclear reactor is provided. The mechanism includes an elongate pressure housing in which a plurality of closely spaced drive rods are located. Each drive rod is connected to a rod which is insertable in the reactor core. An electromechanical stationary latch device is provided which is actuatable to hold each drive rod stationary with respect to the pressure housing. An electromechanical movable latch device is also provided for each one of the drive rods. Each movable latch device is provided with a base and is actuatable to hold a respective drive rod stationary with respect to the base. An electromechanical lift device is further provided for each base which is actuatable for moving a respective base longitudinally along the pressure housing. In this manner, one or more drive rods can be moved in the pressure housing by sequentially and repetitively operating the electromechanical devices. Preferably, each latch device includes a pair of opposed latches which grip teeth located on the respective drive rod. Two, three, or four drive rods can be located symmetrically about the longitudinal axis of the pressure housing.

  18. Expected Technological Innovation to Drive Global Market for...

    Open Energy Info (EERE)

    systems in terms of various end use segments, which include industrial, commercial and residential markets for microturbines. The commercial end use segment is expected to drive...

  19. Energy Department Announces $60 Million to Drive Affordable,...

    Broader source: Energy.gov (indexed) [DOE]

    SunShot Initiative is a collaborative national effort that aggressively drives innovation to make solar energy fully cost-competitive with traditional energy sources by...

  20. Energy Department Announces $19 Million to Drive Down Solar Soft...

    Office of Environmental Management (EM)

    Energy Department's broader SunShot Initiative investments that are driving down the cost of solar and making solar affordable for more American families and companies. Since...

  1. Solutia: Utilizing Sub-Metering to Drive Energy Project Approvals...

    Broader source: Energy.gov (indexed) [DOE]

    plant. Solutia: Utilizing Sub-Metering to Drive Energy Project Approvals Through Data (July 2011) More Documents & Publications Nissan North America: How Sub-Metering...

  2. Hard Driving and Efficiency: iron production in 1890

    E-Print Network [OSTI]

    Berck, Peter

    1977-01-01

    hard driving or the Solvay process--was rational for British2) neglect of the Solvay process for producing soda was

  3. Incorporating solid state drives into distributed storage systems

    E-Print Network [OSTI]

    Wacha, Rosie

    2012-01-01

    27 Low Power Storage Systems . . . . . . . . . . . . . . .Drives into Distributed Storage Systems Rosie Wacha Big dataINTO DISTRIBUTED STORAGE SYSTEMS A dissertation submitted in

  4. Driving the National Parks Forward | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Parks Forward Driving the National Parks Forward June 19, 2012 - 4:02pm Addthis Propane shuttle buses used to transport visitors at Mammoth Cave National Park. | Photo...

  5. EV Everywhere Electric Drive Workshop: Preliminary Target-Setting...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    given at the EV Everywhere Grand Challenge - Electric Drive (Power Electronics and Electric Machines) Workshop on July 24, 2012 held at the Doubletree O'Hare, Chicago, IL....

  6. EV Everywhere Grand Challenge Introduction for Electric Drive...

    Energy Savers [EERE]

    Danielson at the EV Everywhere Grand Challenge - Electric Drive (Power Electronics and Electric Machines) Workshop on July 24, 2012 held at the Doubletree O'Hare, Chicago, IL....

  7. EV Everywhere Grand Challenge - Electric Drive (Power Electronics...

    Broader source: Energy.gov (indexed) [DOE]

    EV Everywhere EV Everywhere Grand Challenge - Electric Drive (Power Electronics and Electric Machines) Workshop Agenda EV Everywhere Grand Challenge - Battery Workshop...

  8. EV Everywhere Workshop: Traction Drive Systems Breakout Group...

    Broader source: Energy.gov (indexed) [DOE]

    7amarlinoed.pdf More Documents & Publications EV Everywhere - Charge to Breakout Sessions EV Everywhere Framing Workshop - Report Out & Lessons Learned Traction Drive Systems...

  9. Electrical motor/generator drive apparatus and method

    DOE Patents [OSTI]

    Su, Gui Jia

    2013-02-12

    The present disclosure includes electrical motor/generator drive systems and methods that significantly reduce inverter direct-current (DC) bus ripple currents and thus the volume and cost of a capacitor. The drive methodology is based on a segmented drive system that does not add switches or passive components but involves reconfiguring inverter switches and motor stator winding connections in a way that allows the formation of multiple, independent drive units and the use of simple alternated switching and optimized Pulse Width Modulation (PWM) schemes to eliminate or significantly reduce the capacitor ripple current.

  10. Consider Steam Turbine Drives for Rotating Equipment, Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for Rotating Equipment Steam turbines are well suited as prime movers for driving boiler feedwater pumps, forced or induced-draft fans, blowers, air compressors, and other...

  11. Watch Energy Secretary Moniz Test Drive the Toyota Mirai

    Broader source: Energy.gov [DOE]

    The Energy Department posted a video of ?Secretary Ernest Moniz driving the Toyota Mirai, the first fuel cell electric vehicle (FCEV) for sale in the United States.

  12. Vehicle Technologies Office: U.S. DRIVE 2013 Technical Accomplishments...

    Broader source: Energy.gov (indexed) [DOE]

    Report summarizes key technical accomplishments in the development of advanced automotive and related energy infrastructure technologies achieved in 2013 by the U.S. DRIVE...

  13. Impact Of Real-World Driving Characteristics On Vehicular Emissions

    E-Print Network [OSTI]

    Nesamani, K S; Subramanian, K. P.

    2005-01-01

    University of Hawaii. (2001). Kuhler, M. and D. Karstens,influence on emissions. Kuhler and Karstens included a fewcharacterize the driving cycle (Kuhler and Karstens 1978).

  14. Critical Factors Driving the High Volumetric Uptake of Methane...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Critical Factors Driving the High Volumetric Uptake of Methane in Cu-3(btc)(2) Previous Next List Hulvey, Zeric; Vlaisavljevich, Bess; Mason, Jarad A.; Tsivion, Ehud; Dougherty,...

  15. Energy Department Announces $53 Million to Drive Innovation,...

    Broader source: Energy.gov (indexed) [DOE]

    projects that aim to drive down the cost of solar energy, tackling key aspects of technology development in order to bring innovative ideas to the market more quickly....

  16. Electric Drive and Advanced Battery and Components Testbed (EDAB...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    vss033carlson2012o.pdf More Documents & Publications Electric Drive and Advanced Battery and Components Testbed (EDAB) Vehicle Technologies Office Merit Review 2014: Electric...

  17. Unique Aspects of RMF Current Drive Applied to FRCs

    E-Print Network [OSTI]

    Washington at Seattle, University of

    50 l Rotamak RMF flux drive pushes FRC against plasma tube wall #12;US-Japan November, 1999 STX RMF theory and FRC experiments Analytic torque calculations FRC equilibrium model and flux drive Model calculations and experimental comparison Summary #12;Simple RMF Penetration Theory & `FRC Experiments #12;US

  18. Experimental Determination of Crack Driving Forces in Integrated Structures

    E-Print Network [OSTI]

    Suo, Zhigang

    8/2/2004 1 Experimental Determination of Crack Driving Forces in Integrated Structures Jun He in a structure, the crack driving force G is the reduction of the elastic energy in the structure, associated. In practice, however, such a calculation is prohibitively difficult for integrated structures of complex

  19. DRIVING AND PARKING DIRECTIONS UCSD Computer Science and Engineering building

    E-Print Network [OSTI]

    Simunic, Tajana

    DRIVING AND PARKING DIRECTIONS UCSD Computer Science and Engineering building and CNS offices From North of La Jolla - Interstate 5 Interstate 5 South. Exit Genesee and head west (right). Go up to the right. When you reach Voigt Drive (stop sign), turn left and go down a hill. Turn left on Equality Lane

  20. The Effect of Ridesharing Services on Drunk Driving 

    E-Print Network [OSTI]

    Kalmbach, Zachary John

    2014-09-19

    Drunk driving is a significant problem in today’s society, and the recent development of ridesharing services, like Uber, offer a new way to avoid driving under the influence. In this paper, I examine whether the presence of Uber has caused a...

  1. Working on new gas turbine cycle for heat pump drive

    E-Print Network [OSTI]

    Oak Ridge National Laboratory

    Working on new gas turbine cycle for heat pump drive FILE COPY TAP By Irwin Stambler, Field Editor, is sized for a 10-ton heat pump system - will be scaled to power a commercial product line ranging from 7 of the cycle- as a heat pump drive for commercial installations. Company is testing prototype gas turbine

  2. Tunneling control by highfrequency driving Ilya Vorobeichik and Nimrod Moiseyev

    E-Print Network [OSTI]

    Moiseyev, Nimrod

    Tunneling control by high­frequency driving Ilya Vorobeichik and Nimrod Moiseyev Department @3# supports this hypothesis. However, in the limit of high­frequency driving, the Kramers systems in strong laser fields @1,2#. We show that high­frequency second­order perturbation theory based

  3. WAYNE STATE UNIVERSITY ELECTRIC-DRIVE VEHICLE ENGINEERING

    E-Print Network [OSTI]

    Berdichevsky, Victor

    5120 Fundamentals of Alternative Energy Technology 4 PROGRAM (4 Courses) EVE 5___ 4 EVE 5___ 4 EVE 5WAYNE STATE UNIVERSITY ELECTRIC-DRIVE VEHICLE ENGINEERING PLAN OF WORK FOR MASTERS DEGREE Student with the Electric-Drive Vehicle Engineering Office (1100 Engineering) prior to the beginning of the second semester

  4. Transient and quasisteady behavior with rotating magnetic field current drive

    E-Print Network [OSTI]

    Washington at Seattle, University of

    rotamaks and the Star Thrust Experiment. Other sources of ion momentum are essential for RMF current drive in hotter, fusion-relevant plasmas. The properties of the quasisteady state are found, including the self that penetrate the plasma are a promising method by which to drive a steady current in magnetic fusion systems

  5. S-700A MOSSBAUER DRIVE INTERCONNECTION DIAGRAM FOR

    E-Print Network [OSTI]

    Browder, Tom

    S-700A MOSSBAUER DRIVE INTERCONNECTION DIAGRAM FOR C.A.OPERATION WITH COMPUTER CUMPUEK WITH K A OK OPERATION D V -LIY I SCALER RESET DATA The S-700A drive and K-4 motor can also be used in Constant Velocity the constant velocity motion. The duty cycle is about 85%, and there is provision for the gating of data so

  6. A Driving Simulator for Teaching Embedded Automotive Control Applications

    E-Print Network [OSTI]

    Gillespie, Brent

    A Driving Simulator for Teaching Embedded Automotive Control Applications Paul G. Griffiths component uses a typical automotive power- train micro-controller and teaches topics in system dynamics students build a fixed-based driving simulator to test advanced automotive control system designs

  7. Active surge control of centrifugal compressors using drive torque

    E-Print Network [OSTI]

    Gravdahl, Jan Tommy

    Active surge control of centrifugal compressors using drive torque Jan Tommy Gravdahl , Olav control is presented. A centrifugal compressor driven by an electrical motor is studied, and the drive of centrifugal com- pressors, which occurs when the operating point of the compressor is located to the left

  8. Practical object recognition in autonomous driving and beyond

    E-Print Network [OSTI]

    Thrun, Sebastian

    by caravaning on highways, thus reducing CO2 emissions. The recent self-driving car project at Google [11] has high-reliability systems that are necessary for real-world use. Despite this, there are many areas's autonomous driving systems are based on building detailed maps of the world, then localizing to them during

  9. Base drive and overlap protection circuit

    DOE Patents [OSTI]

    Gritter, David J. (Southfield, MI)

    1983-01-01

    An inverter (34) which provides power to an A. C. machine (28) is controlled by a circuit (36) employing PWM control strategy whereby A. C. power is supplied to the machine at a preselectable frequency and preselectable voltage. This is accomplished by the technique of waveform notching in which the shapes of the notches are varied to determine the average energy content of the overall waveform. Through this arrangement, the operational efficiency of the A. C. machine is optimized. The control circuit includes a microcomputer and memory element which receive various parametric inputs and calculate optimized machine control data signals therefrom. The control data is asynchronously loaded into the inverter through an intermediate buffer (38). A base drive and overlap protection circuit is included to insure that both transistors of a complimentary pair are not conducting at the same time. In its preferred embodiment, the present invention is incorporated within an electric vehicle (10) employing a 144 VDC battery pack (32) and a three-phase induction motor (18).

  10. Advanced insulated gate bipolar transistor gate drive

    DOE Patents [OSTI]

    Short, James Evans (Monongahela, PA); West, Shawn Michael (West Mifflin, PA); Fabean, Robert J. (Donora, PA)

    2009-08-04

    A gate drive for an insulated gate bipolar transistor (IGBT) includes a control and protection module coupled to a collector terminal of the IGBT, an optical communications module coupled to the control and protection module, a power supply module coupled to the control and protection module and an output power stage module with inputs coupled to the power supply module and the control and protection module, and outputs coupled to a gate terminal and an emitter terminal of the IGBT. The optical communications module is configured to send control signals to the control and protection module. The power supply module is configured to distribute inputted power to the control and protection module. The control and protection module outputs on/off, soft turn-off and/or soft turn-on signals to the output power stage module, which, in turn, supplies a current based on the signal(s) from the control and protection module for charging or discharging an input capacitance of the IGBT.

  11. Well-to-Wheels analysis of landfill gas-based pathways and their addition to the GREET model.

    SciTech Connect (OSTI)

    Mintz, M.; Han, J.; Wang, M.; Saricks, C.; Energy Systems

    2010-06-30

    Today, approximately 300 million standard cubic ft/day (mmscfd) of natural gas and 1600 MW of electricity are produced from the decomposition of organic waste at 519 U.S. landfills (EPA 2010a). Since landfill gas (LFG) is a renewable resource, this energy is considered renewable. When used as a vehicle fuel, compressed natural gas (CNG) produced from LFG consumes up to 185,000 Btu of fossil fuel and generates from 1.5 to 18.4 kg of carbon dioxide-equivalent (CO{sub 2}e) emissions per million Btu of fuel on a 'well-to-wheel' (WTW) basis. This compares with approximately 1.1 million Btu and 78.2 kg of CO{sub 2}e per million Btu for CNG from fossil natural gas and 1.2 million Btu and 97.5 kg of CO{sub 2}e per million Btu for petroleum gasoline. Because of the additional energy required for liquefaction, LFG-based liquefied natural gas (LNG) requires more fossil fuel (222,000-227,000 Btu/million Btu WTW) and generates more GHG emissions (approximately 22 kg CO{sub 2}e /MM Btu WTW) if grid electricity is used for the liquefaction process. However, if some of the LFG is used to generate electricity for gas cleanup and liquefaction (or compression, in the case of CNG), vehicle fuel produced from LFG can have no fossil fuel input and only minimal GHG emissions (1.5-7.7 kg CO{sub 2}e /MM Btu) on a WTW basis. Thus, LFG-based natural gas can be one of the lowest GHG-emitting fuels for light- or heavy-duty vehicles. This report discusses the size and scope of biomethane resources from landfills and the pathways by which those resources can be turned into and utilized as vehicle fuel. It includes characterizations of the LFG stream and the processes used to convert low-Btu LFG into high-Btu renewable natural gas (RNG); documents the conversion efficiencies and losses of those processes, the choice of processes modeled in GREET, and other assumptions used to construct GREET pathways; and presents GREET results by pathway stage. GREET estimates of well-to-pump (WTP), pump-to-wheel (PTW), and WTW energy, fossil fuel, and GHG emissions for each LFG-based pathway are then summarized and compared with similar estimates for fossil natural gas and petroleum pathways.

  12. Miniature pipe crawler tractor

    DOE Patents [OSTI]

    McKay, Mark D. (Idaho Falls, ID); Anderson, Matthew O. (Idaho Falls, ID); Ferrante, Todd A. (Westerville, OH); Willis, W. David (Idaho Falls, ID)

    2000-01-01

    A pipe crawler tractor may comprise a half tractor assembly having a first base drive wheel, a second base drive wheel, and a top drive wheel. The drive wheels are mounted in spaced-apart relation so that the top drive wheel is positioned between the first and second base drive wheels. The mounting arrangement is also such that the first and second base drive wheels contact the inside surface of the pipe at respective first and second positions and so that the top drive wheel contacts the inside surface of the pipe at a third position, the third position being substantially diametrically opposed to the first and second positions. A control system connected to the half tractor assembly controls the rotation of the first base wheel, the second base wheel, and the top drive wheel to move the half tractor assembly within the pipe.

  13. In-plane ultrasonic velocity measurement of longitudinal and shear waves in the machine direction with transducers in rotating wheels

    DOE Patents [OSTI]

    Hall, Maclin S. (Marietta, GA); Jackson, Theodore G. (Atlanta, GA); Knerr, Christopher (Lawrenceville, GA)

    1998-02-17

    An improved system for measuring the velocity of ultrasonic signals within the plane of moving web-like materials, such as paper, paperboard and the like. In addition to velocity measurements of ultrasonic signals in the plane of the web in the MD and CD, one embodiment of the system in accordance with the present invention is also adapted to provide on-line indication of the polar specific stiffness of the moving web. In another embodiment of the invention, the velocity of ultrasonic signals in the plane of the web are measured by way of a plurality of ultrasonic transducers carried by synchronously driven wheels or cylinders, thus eliminating undue transducer wear due to any speed differences between the transducers and the web. In order to provide relatively constant contact force between the transducers and the webs, the transducers are mounted in a sensor housings which include a spring for biasing the transducer radially outwardly. The sensor housings are adapted to be easily and conveniently mounted to the carrier to provide a relatively constant contact force between the transducers and the moving web.

  14. In-plane ultrasonic velocity measurement of longitudinal and shear waves in the machine direction with transducers in rotating wheels

    DOE Patents [OSTI]

    Hall, M.S.; Jackson, T.G.; Knerr, C.

    1998-02-17

    An improved system for measuring the velocity of ultrasonic signals within the plane of moving web-like materials, such as paper, paperboard and the like. In addition to velocity measurements of ultrasonic signals in the plane of the web in the MD and CD, one embodiment of the system in accordance with the present invention is also adapted to provide on-line indication of the polar specific stiffness of the moving web. In another embodiment of the invention, the velocity of ultrasonic signals in the plane of the web are measured by way of a plurality of ultrasonic transducers carried by synchronously driven wheels or cylinders, thus eliminating undue transducer wear due to any speed differences between the transducers and the web. In order to provide relatively constant contact force between the transducers and the webs, the transducers are mounted in a sensor housings which include a spring for biasing the transducer radially outwardly. The sensor housings are adapted to be easily and conveniently mounted to the carrier to provide a relatively constant contact force between the transducers and the moving web. 37 figs.

  15. Department of Power Electronics and Electrical Drives Prof. Dr.Ing. Joachim Bcker

    E-Print Network [OSTI]

    Paderborn, Universität

    .09.2014 Mechatronics und Electrical Drives SS 2014 Page 1 of 6 Mechatronics and Electrical Drives 03.09.2014 Surname Drives Prof. Dr.­Ing. J. Böcker 03.09.2014 Mechatronics und Electrical Drives SS 2014 Page 2 of 6.09.2014 Mechatronics und Electrical Drives SS 2014 Page 3 of 6 Aufgabe 2: Reluctance motor (18 Points) The profiles

  16. Base drive circuit for a four-terminal power Darlington

    DOE Patents [OSTI]

    Lee, Fred C. (Blacksburg, VA); Carter, Roy A. (Salem, VA)

    1983-01-01

    A high power switching circuit which utilizes a four-terminal Darlington transistor block to improve switching speed, particularly in rapid turn-off. Two independent reverse drive currents are utilized during turn off in order to expel the minority carriers of the Darlington pair at their own charge sweep-out rate. The reverse drive current may be provided by a current transformer, the secondary of which is tapped to the base terminal of the power stage of the Darlington block. In one application, the switching circuit is used in each power switching element in a chopper-inverter drive of an electric vehicle propulsion system.

  17. Scaling of lower hybrid current drive with temperature

    SciTech Connect (OSTI)

    Harvey, R.W. ); McCoy, M.G. ); Ram, A.K.; Bers, A. ); Fuchs, V. )

    1992-06-01

    The 3-D Fokker-Planck/quasilinear code (CQL3D) is used to study the temperature scaling of lower hybrid current drive (LHCD) in the JET and JT-60 experiments. An offset-linear increase of current drive efficiency is obtained as a function of volume average temperature {l angle}T{sub e}{r angle} up to {approximately} 2.5, and reduced rate of efficiency increase is found at higher temperatures. The LHCD results indicate some fast wave/LH current drive synergy in the JET LH/FW experiments; however, code results discussed here show that synergy is not due to TTMP damping of the fast wave.

  18. Imprinting Hatchery Reared Salmon and Steelhead Trout for Homing, Volume I of III; Narrative, 1978-1983 Final Report.

    SciTech Connect (OSTI)

    Slatick, Emil; Gilbreath, Lyle G.; Harmon, Jerrel R. (Northwest and Alaska Fisheries Science Center, Coastal Zone and Estuarine Studies Division, Seattle, WA)

    1988-02-01

    The National Marine Fisheries Service began conducting homing research on Pacific salmon and steelhead. Over 4 million juvenile salmon and steelhead were marked and released, and 23 individual experiments were conducted. The research had the following objectives: (1) develop the techniques for imprinting homing cues while increasing survival of hatchery reared salmonids and (2) provide fishery managers with the information necessary to increase the returns of salmon and steelhead to the Columbia River system and to effectively distribute these fish to the various user groups. Our imprint methods were grouped into three general categories: (1) natural migration imprint from a hatchery of origin or an alternate homing site (by allowing fish to volitionally travel downstream through the river on their seaward journey), (2) single exposure imprinting (cueing fish to a single unique water supply with or without mechanical stimuli prior to transport and release), and (3) sequential exposure imprinting (cueing fish to two or more water sources in a step-by-step process to establish a series of signposts for the route ''home''). With variations, all three techniques were used with all salmonid groups tested: coho salmon, spring and fall chinook salmon, and steelhead. For the single and sequential imprint, fish were transported around a portion of their normal migration route before releasing them into the Columbia River.

  19. Microsoft PowerPoint - 06 Crawley Drive for Net Zero Energy Commercial...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6 Crawley Drive for Net Zero Energy Commercial Buildings Microsoft PowerPoint - 06 Crawley Drive for Net Zero Energy Commercial Buildings Microsoft PowerPoint - 06 Crawley Drive...

  20. Is it Cost-Effective to Replace Old Eddy-Current Drives? | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Is it Cost-Effective to Replace Old Eddy-Current Drives? Is it Cost-Effective to Replace Old Eddy-Current Drives? New pulse-width-modulated (PWM) adjustable speed drives (ASDs) may...

  1. Algal Biofuels: Long-Term Energy Benefits Drive U.S. Research...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Algal Biofuels: Long-Term Energy Benefits Drive U.S. Research Algal Biofuels: Long-Term Energy Benefits Drive U.S. Research Algal Biofuels: Long-Term Energy Benefits Drive U.S....

  2. Medium- and Heavy-Duty Electric Drive Vehicle Simulation and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Medium- and Heavy-Duty Electric Drive Vehicle Simulation and Analysis PI: Jeff Gonder (NREL) Team: Laurie Ramroth and Aaron Brooker May 15, 2012 Project ID : VSS043 This...

  3. Medium- and Heavy-Duty Electric Drive Vehicle Simulation and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Evaluation vss043barnitt2011o.pdf More Documents & Publications Medium- and Heavy-Duty Electric Drive Vehicle Simulation and Analysis Medium and Heavy-Duty Vehicle Field...

  4. Cooling Tower Energy Conservation Through Hydraulic Fan Drives 

    E-Print Network [OSTI]

    Dickerson, J.

    1991-01-01

    Many companies offer gearboxes, shafts, and couplings for cooling tower fan drives, with little or no innovation. These companies have traditionally been purchased with an emphasis on cost and not "Return on Investment!" In the past, when energy...

  5. Driving Sensing Technology in Oil & Gas | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Newest APS Fellow Driving Groundbreaking Sensing Technology in Oil & Gas Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to...

  6. Adjustable Speed AC Motor Drives-Applications Problems 

    E-Print Network [OSTI]

    Enjeti, P.

    1997-01-01

    Adjustable speed AC drives have become the preferred choice in many industrial applications where controlled speed is required. At the same time, the maturing of the technology and the availability of fast and efficient ...

  7. Magnetically suspended reaction sphere with one-axis hysteresis drive

    E-Print Network [OSTI]

    Zhou, Lei., S.M. Massachusetts Institute of Technology

    2014-01-01

    This thesis presents the design, modeling, implementation, and control of a magnetically suspended reaction sphere with one-axis hysteresis drive (1D-MSRS). The goal of this project is two fold: (a) exploring the design ...

  8. Food Finders Drive Organized - - Purdue University - West Lafayette

    E-Print Network [OSTI]

    $author.value

    2015-11-11

    Nov 11, 2015 ... The Math Office Staff teamed up this year to host a FOOD FINDERS food drive to help those less fortunate during the Holiday Season! The food ...

  9. High efficiency pulse motor drive for robotic propulsion

    E-Print Network [OSTI]

    Sun, Zhen, M.S. Massachusetts Institute of Technology

    2013-01-01

    The goal of this research is to improve the power efficiency of robotic locomotion through the use of series elastic actuation, with a focus on swimming motion. To achieve high efficiency, electromechanical drives need to ...

  10. EM modeling of RF drive in DTL tank 4

    SciTech Connect (OSTI)

    Kurennoy, Sergey S.

    2012-06-19

    A 3-D MicroWave Studio model for the RF drive in the LANSCE DTL tank 4 has been built. Both eigensolver and time-domain modeling are used to evaluate maximal fields in the drive module and RF coupling. The LANSCE DTL tank 4 has recently been experiencing RF problems, which may or may not be related to its replaced RF coupler. This situation stimulated a request by Dan Rees to provide EM modeling of the RF drive in the DTL tank 4 (T4). Jim O'Hara provided a CAD model that was imported into the CST Microwave Studio (MWS) and after some modifications became a part of a simplified MWS model of the T4 RF drive. This technical note describes the model and presents simulation results.

  11. Driving tissue morphogenetic cascades using tunable nanolayered surface coatings

    E-Print Network [OSTI]

    Shah, Nisarg Jaydeep

    2014-01-01

    Harnessing the synergy between materials at the nanoscale can be a valuable tool in understanding and probing cellular phenomena and in driving specific processes that lead to tissue and organ regeneration and repair. ...

  12. Adjustable Speed Drives as Applied to Centrifugal Pumps 

    E-Print Network [OSTI]

    Jarc, D. A.; Robechek, J. D.; Connors, D. P.

    1982-01-01

    of flow control is required. The traditional approach to flow control has used valves which increase system pressure and inherently waste energy and generally cause the pump to operate at reduced efficiencies. Adjustable speed drives can achieve reduced...

  13. Driving Research in Electric Machines |GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Driving Research in Electric Machines Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to...

  14. EV Everywhere EV Everywhere Grand Challenge - Electric Drive...

    Broader source: Energy.gov (indexed) [DOE]

    Agenda for the EV Everywhere Grand Challenge - Electric Drive Workshop on July 24, 2012 at the Doubletree O'Hare, Chicago, IL agendaed.pdf More Documents & Publications EV...

  15. Shell trajectory measurements from direct-drive implosion experiments...

    Office of Scientific and Technical Information (OSTI)

    A technique to measure the shell trajectory in direct-drive inertial confinement fusion implosions is presented. The x-ray self emission of the target is measured with an...

  16. Variable Frequency Drives: Energy Savings and Impact on Motor Performance 

    E-Print Network [OSTI]

    Petro, D.

    1993-01-01

    Variable frequency drives (VFDs) have found widespread application in recent years. VFDs are valued for their potential to save energy and improve processes. Reliability has improved significantly, but there are still pitfalls to be addressed...

  17. Minimize Adverse Motor and Adjustable Speed Drive Interactions

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    drive (VFD) with a fast-rise-time insulated gate bipolar transistor (IGBT) to reduce switching losses and noise levels. However, higher carrier frequencies and faster rise-time...

  18. Solutia: Utilizing Sub-Metering to Drive Energy Project Approvals...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solutia: Utilizing Sub-Metering to Drive Energy Project Approvals Through Data Solutia, Inc. has a long history with sub-metering, dating back to the construction of some of its...

  19. High-Voltage Solid Polymer Batteries for Electric Drive Vehicles...

    Office of Scientific and Technical Information (OSTI)

    Voltage Solid Polymer Batteries for Electric Drive Vehicles Eitouni, Hany; Yang, Jin; Pratt, Russell; Wang, Xiao; Grape, Ulrik The purpose of this project was for Seeo to develop a...

  20. Innovation incentives and competition in the hard disk drive industry

    E-Print Network [OSTI]

    Wu, Xiaohua Sherry

    2011-01-01

    Firms in the hard disk drive industry are continually engaging in R & D and improving the quality of their products. We explore various determinants of the product innovation incentives for firms concerned with both their ...

  1. A cloud-assisted design for autonomous driving

    E-Print Network [OSTI]

    Suresh Kumar, Swarun

    This paper presents Carcel, a cloud-assisted system for autonomous driving. Carcel enables the cloud to have access to sensor data from autonomous vehicles as well as the roadside infrastructure. The cloud assists autonomous ...

  2. Performance and mix measurements of indirect drive Cu doped Be...

    Office of Scientific and Technical Information (OSTI)

    indirect drive Cu doped Be implosions Authors: Casey, D T ; Woods, T ; Smalyuk, V A ; Hurricane, O A ; Glebov, V Y ; Stoeckl, C ; Theobald, W ; Wallace, R ; Nikroo, A ; Shuldberg,...

  3. Frequency and amplitude control for an experimental linac rf drive 

    E-Print Network [OSTI]

    Atre, Mahesh Purushottam

    1992-01-01

    FREQUENCY AND AMPLITUDE CONTROL FOR AN EXPERIMENTAL LINAC RF DRIVE A Thesis by MAHESH PURUSHOTTAM ATRE Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER... OF SCIENCE May 1992 Major Subject: Electrical Engineering FREQUENCY AND AMPLITUDE CONTROL FOR AN EXPERIMENTAL LINAC RF DRIVE A Thesis by MAHESH PURUSHOTTAM ATRE Approved as to style and content by: S. P. Bhattachary (Chair of Committee) arng Huang...

  4. Validity and limitations of gas-drive relative permeability measurement 

    E-Print Network [OSTI]

    Gupta, Anand Kumar

    1971-01-01

    VALIDITY AND LIMITATIONS OF GAS-DRIVE RELA TI VE PERMEABILITY MEASUREMEN T A Thesis by ANAND KUMAR GUPTA Submitted to the Graduate College of Texas ARM University in partial fulfillxnent of the requirement for the degree of MASTER Ok SCIENCE... August, 1971 Major Subject: Petroleum Engineering VALIDITY AND LIMITATIONS OF GAS-DRIVE RELATIVE PERMEABILITY MEASUREMENT A Thesis by ANAND KUMAR GUPTA Approved as to style and content by: ( airman of Committee) ber) Head of Department) (Member...

  5. Characterizing the noise produced by hard disk drives 

    E-Print Network [OSTI]

    Cherniak, Bruce Marshall

    1991-01-01

    CHARACTERIZING THE NOISE PRODUCED BY HARD DISK DRIVES A Thesis by BRUCE MARSHALL CHERNIAK Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE... August 1991 Major Subject: Electrical Engineering CHARACTERIZING THE NOISE PRODUCED BY HARD DISK DRIVES A Thesis by BRUCE MARSHALL CHERNIAK Approved as to style and content by: Karan L. Watson (Chair of Committee) Hosame Abu-Amara (Member...

  6. Entrainment of Weakly Coupled Oscillators by External Driving

    E-Print Network [OSTI]

    Anlage, Steven

    Entrainment of Weakly Coupled Oscillators by External Driving Rose Faghih and John Platig Advisers entrainment? Entrainment: The response of the oscillator system varies periodically at the period of the drive is a threshold for entrainment. Our Result 0 0.5 1 1.5 2 2.5 3 0 0.5 1 1.5 2 2.5 3 M Entrainment Threshold in M

  7. Well-to-wheels analysis of energy use and greenhouse gas emissions of plug-in hybrid electric vehicles.

    SciTech Connect (OSTI)

    Elgowainy, A.; Han, J.; Poch, L.; Wang, M.; Vyas, A.; Mahalik, M.; Rousseau, A.

    2010-06-14

    Plug-in hybrid electric vehicles (PHEVs) are being developed for mass production by the automotive industry. PHEVs have been touted for their potential to reduce the US transportation sector's dependence on petroleum and cut greenhouse gas (GHG) emissions by (1) using off-peak excess electric generation capacity and (2) increasing vehicles energy efficiency. A well-to-wheels (WTW) analysis - which examines energy use and emissions from primary energy source through vehicle operation - can help researchers better understand the impact of the upstream mix of electricity generation technologies for PHEV recharging, as well as the powertrain technology and fuel sources for PHEVs. For the WTW analysis, Argonne National Laboratory researchers used the Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET) model developed by Argonne to compare the WTW energy use and GHG emissions associated with various transportation technologies to those associated with PHEVs. Argonne researchers estimated the fuel economy and electricity use of PHEVs and alternative fuel/vehicle systems by using the Powertrain System Analysis Toolkit (PSAT) model. They examined two PHEV designs: the power-split configuration and the series configuration. The first is a parallel hybrid configuration in which the engine and the electric motor are connected to a single mechanical transmission that incorporates a power-split device that allows for parallel power paths - mechanical and electrical - from the engine to the wheels, allowing the engine and the electric motor to share the power during acceleration. In the second configuration, the engine powers a generator, which charges a battery that is used by the electric motor to propel the vehicle; thus, the engine never directly powers the vehicle's transmission. The power-split configuration was adopted for PHEVs with a 10- and 20-mile electric range because they require frequent use of the engine for acceleration and to provide energy when the battery is depleted, while the series configuration was adopted for PHEVs with a 30- and 40-mile electric range because they rely mostly on electrical power for propulsion. Argonne researchers calculated the equivalent on-road (real-world) fuel economy on the basis of U.S. Environmental Protection Agency miles per gallon (mpg)-based formulas. The reduction in fuel economy attributable to the on-road adjustment formula was capped at 30% for advanced vehicle systems (e.g., PHEVs, fuel cell vehicles [FCVs], hybrid electric vehicles [HEVs], and battery-powered electric vehicles [BEVs]). Simulations for calendar year 2020 with model year 2015 mid-size vehicles were chosen for this analysis to address the implications of PHEVs within a reasonable timeframe after their likely introduction over the next few years. For the WTW analysis, Argonne assumed a PHEV market penetration of 10% by 2020 in order to examine the impact of significant PHEV loading on the utility power sector. Technological improvement with medium uncertainty for each vehicle was also assumed for the analysis. Argonne employed detailed dispatch models to simulate the electric power systems in four major regions of the US: the New England Independent System Operator, the New York Independent System Operator, the State of Illinois, and the Western Electric Coordinating Council. Argonne also evaluated the US average generation mix and renewable generation of electricity for PHEV and BEV recharging scenarios to show the effects of these generation mixes on PHEV WTW results. Argonne's GREET model was designed to examine the WTW energy use and GHG emissions for PHEVs and BEVs, as well as FCVs, regular HEVs, and conventional gasoline internal combustion engine vehicles (ICEVs). WTW results are reported for charge-depleting (CD) operation of PHEVs under different recharging scenarios. The combined WTW results of CD and charge-sustaining (CS) PHEV operations (using the utility factor method) were also examined and reported. According to the utility factor method, the share of vehicle miles trav

  8. Noise drives sharpening of gene expression boundaries in the zebrafish hindbrain

    E-Print Network [OSTI]

    Zhang, Lei; Radtke, Kelly; Zheng, Likun; Cai, Anna Q.; Schilling, Thomas F.; Nie, Qing

    2012-01-01

    Macmillan Publishers Limited Noise drives sharpening of genewww.molecularsystemsbiology.com Noise drives sharpening ofin morphogen concentration and noise in signal transduction

  9. Using Community-Based Social Marketing to Drive Demand for Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Using Community-Based Social Marketing to Drive Demand for Energy Efficiency Using Community-Based Social Marketing to Drive Demand for Energy Efficiency Slides presented in the...

  10. U.S. First Responder Safety Training for Advanced Electric Drive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    First Responder Safety Training for Advanced Electric Drive Vehicle Presentation U.S. First Responder Safety Training for Advanced Electric Drive Vehicle Presentation 2010 DOE...

  11. SunLine Test Drives Hydrogen Bus: Hydrogen Fuel Cell & Infrastructure...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Test Drives Hydrogen Bus: Hydrogen Fuel Cell & Infrastructure Technologies Program, Fuel Cell Bus Demonstration Projects Fact Sheet. SunLine Test Drives Hydrogen Bus: Hydrogen Fuel...

  12. Is it Cost-Effective to Replace Old Eddy-Current Drives? - Motor Tip Sheet #12

    SciTech Connect (OSTI)

    2008-07-01

    New pulse-width-modulated (PWM) adjustable speed drives (ASDs) may be cost-effective replacements for aging or maintenance-intensive eddy-current drives.

  13. Health Monitoring of Drive Connected Three-Phase Induction Motors ----- From Wired Towards Wireless Sensor Networks

    E-Print Network [OSTI]

    Xue, Xin

    2009-01-01

    to failure," in Electric Machines and Drives Conference,induction motor," in Electric Machines and Drives Conferenceevaluation for electric machines," in Industrial Electronics

  14. Is it Cost-Effective to Replace Old Eddy-Current Drives?

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (PWM) variable frequency drives (VFD) may be cost- effective replacements for aging or high-maintenance eddy-current drives that are used with variable torque loads, such...

  15. Characterizing the acoustic noise generated by hard disk drives and a scheme for detecting noisy hard drives 

    E-Print Network [OSTI]

    Kim, Seuk Bo

    1992-01-01

    to nearly all personal computer systems, and has been identified as one of the more noisy elements in the system. " The research limited its scope on pattern recognition and characteristic feature selection of noise signals for hard disl& drives...

  16. Hydrogen Pathways: Updated Cost, Well-to-Wheels Energy Use, and Emissions for the Current Technology Status of Ten Hydrogen Production, Delivery, and Distribution Scenarios

    SciTech Connect (OSTI)

    Ramsden, T.; Ruth, M.; Diakov, V.; Laffen, M.; Timbario, T. A.

    2013-03-01

    This report describes a life-cycle assessment conducted by the National Renewable Energy Laboratory (NREL) of 10 hydrogen production, delivery, dispensing, and use pathways that were evaluated for cost, energy use, and greenhouse gas (GHG) emissions. This evaluation updates and expands on a previous assessment of seven pathways conducted in 2009. This study summarizes key results, parameters, and sensitivities to those parameters for the 10 hydrogen pathways, reporting on the levelized cost of hydrogen in 2007 U.S. dollars as well as life-cycle well-to-wheels energy use and GHG emissions associated with the pathways.

  17. Well-to-Wheels Analysis of Advanced Fuel/Vehicle Systems - A North American Study of Energy Use, Greenhouse Gas Emissions, and Criteria Pollutant Emissions

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Financing ToolInternationalReport FY2014 - Employers139Webmaster Webmaster WebWelcomeWell-to-Wheels

  18. Progress in direct-drive inertial confinement fusion

    SciTech Connect (OSTI)

    McCrory, R. L.; Meyerhofer, D. D.; Betti, R.; Craxton, R. S.; Delettrez, J. A.; Edgell, D. H.; Glebov, V. Yu.; Goncharov, V. N.; Harding, D. R.; Jacobs-Perkins, D. W.; Knauer, J. P.; Marshall, F. J.; McKenty, P. W.; Radha, P. B.; Regan, S. P.; Sangster, T. C.; Seka, W.; Short, R. W.; Skupsky, S.; Smalyuk, V. A. [Laboratory for Laser Energetics, University of Rochester, 250 East River Road, Rochester, New York 14623-1299 (United States)] (and others)

    2008-05-15

    Significant progress in direct-drive inertial confinement fusion (ICF) research has been made since the completion of the 60-beam, 30-kJ{sub UV} OMEGA Laser System [Boehly, Opt. Commun. 133, 495 (1997)] in 1995. A theory of ignition requirements, applicable to any ICF concept, has been developed. Detailed understanding of laser-plasma coupling, electron thermal transport, and hot-electron preheating has lead to the measurement of neutron-averaged areal densities of {approx}200 mg/cm{sup 2} in cryogenic target implosions. These correspond to an estimated peak fuel density in excess of 100 g/cm{sup 3} and are in good agreement with hydrodynamic simulations. The implosions were performed using an 18-kJ drive pulse designed to put the converging fuel on an adiabat of two. The polar-drive concept will allow direct-drive-ignition research on the National Ignition Facility while it is configured for indirect drive. Advanced ICF ignition concepts - fast ignition [Tabak et al., Phys. Plasmas 1, 1626 (1994)] and shock ignition [Betti et al., Phys. Rev. Lett. 98, 155001 (2007)] - have the potential to significantly reduce ignition driver energies and/or provide higher target gain.

  19. The Fight Against Teenage Drunk Driving: Saving Lives and Keeping Preventable Injuries out of the Emergency Department

    E-Print Network [OSTI]

    Jakle, Hal; Spjute, Adam

    2012-01-01

    S tudent S ection The Fight Against Teenage Drunk Driving:AAEM Newsletter Jakle Fight Against Teenage Drunk Driving

  20. Simulations of Plug-in Hybrid Vehicles Using Advanced Lithium Batteries and Ultracapacitors on Various Driving Cycles

    E-Print Network [OSTI]

    Burke, Andy; Zhao, Hengbing

    2010-01-01

    ex> energy storage 2 drive cycle vehicle cycle, the vehicle had blended operation (engine and electric drive

  1. Well-to-wheels Analysis of Energy Use and Greenhouse Gas Emissions of Hydrogen Produced with Nuclear Energy

    SciTech Connect (OSTI)

    Wu, Ye; Wang, Michael Q.; Vyas, Anant D.; Wade, David C.; Taiwo, Temitope A.

    2004-07-01

    A fuel-cycle model-called the Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET) model-has been developed at Argonne National Laboratory to evaluate well-to-wheels (WTW) energy and emission impacts of motor vehicle technologies fueled with various transportation fuels. The GREET model contains various hydrogen (H{sub 2}) production pathways for fuel-cell vehicles (FCVs) applications. In this effort, the GREET model was expanded to include four nuclear H{sub 2} production pathways: (1) H{sub 2} production at refueling stations via electrolysis using Light Water Reactor (LWR)-generated electricity; (2) H{sub 2} production in central plants via thermo-chemical water cracking using steam from High Temperature Gas cooled Reactor (HTGR); (3) H{sub 2} production in central plants via high-temperature electrolysis using HTGR-generated electricity and steam; and (4) H{sub 2} production at refueling stations via electrolysis using HTGR-generated electricity The WTW analysis of these four options include these stages: uranium ore mining and milling; uranium ore transportation; uranium conversion; uranium enrichment; uranium fuel fabrication; uranium fuel transportation; electricity or H{sub 2} production in nuclear power plants; H{sub 2} transportation; H{sub 2} compression; and H{sub 2} FCVs operation. Due to large differences in electricity requirements for uranium fuel enrichment between gas diffusion and centrifuge technologies, two scenarios were designed for uranium enrichment: (1) 55% of fuel enriched through gaseous diffusion technology and 45% through centrifuge technology (the current technology split for U.S. civilian nuclear power plants); and (2) 100% fuel enrichment using the centrifuge technology (a future trend). Our well-to-pump (WTP) results show that significant reductions in fossil energy use and greenhouse gas (GHG) emissions are achieved by nuclear-based H{sub 2} compared to natural gas-based H{sub 2} production via steam methane reforming for a unit of H{sub 2} delivered at refueling stations. In particular, 73-98% of GHG emissions and 81- 99% of fossil energy use are reduced by nuclear-based H{sub 2} relative to natural gas-based H{sub 2}, depending on the uranium enrichment technology and type of nuclear reactor used. When H{sub 2} is applied to FCVs, the WTW results also show large benefit in reducing fossil energy use and GHG emissions. (authors)

  2. Computer-Aided Engineering for Electric Drive Vehicle Batteries (CAEBAT) (Presentation)

    SciTech Connect (OSTI)

    Pesaran, A. A.

    2011-05-01

    This presentation describes NREL's computer aided engineering program for electric drive vehicle batteries.

  3. Behavioral Response to Hydrogen Fuel Cell Vehicles and Refueling: Results of California Drive Clinics

    E-Print Network [OSTI]

    Martin, Elliot W; Shaheen, Susan A; Lipman, T E; Lidicker, Jeffrey

    2009-01-01

    Martin, Elliot, Shaheen, Susan, Lipman, Timothy,OF CALIFORNIA DRIVE CLINICS Elliot Martin Graduate Student

  4. High-Power Converters and AC Drives IEEE PESC2005 Tutorial

    E-Print Network [OSTI]

    Wu, Bin

    Overview · MV Drive Applications Industry Application Examples Petrochemical Pipeline pumps, gas Introduction Main Topics · Medium Voltage (MV) Drive Overview · High Power Converter Topologies · MV Industrial Topic 1 Introduction MV Drive Overview · MV Drive Market Survey Main purpose for high-power fan/pump

  5. Designing Effective Incentives to Drive Residential Retrofit Program Participation (Text Version)

    Broader source: Energy.gov [DOE]

    Transcript of the webinar, "Designing Effective Incentives to Drive Residential Retrofit Program Participation."

  6. Initial Low Recycling Improving Confinement and Current Drive in Advanced Tokamak (AT) and Hybrid Scenarios

    E-Print Network [OSTI]

    Initial Low Recycling Improving Confinement and Current Drive in Advanced Tokamak (AT) and Hybrid Scenarios

  7. Drive train design, construction, and evaluation for a powered cart for third world farmers 

    E-Print Network [OSTI]

    Kittelson, David Andrew

    1986-01-01

    of the broader goal of developing a rugged, safe, and reliable 500 kg capacity vehicle that will cost the farmers less than USS 1000. The drive train includes a torque converter, a v-belt drive with a large plywood pulley, a chain drive, and a solid drive... DEDICATION. ACRNOWLEDGNENT. . LIST OF TABLES. iv vii i LIST OF FIGURES 1 INTRODUCTION. 2 REVIEW OF LITERATURE 2. 1 Power Source 2. 2 Preliminary Drive Options 2. 3 Belt Drives. 2. 4 Chain Drives 10 13 2. 5 Differentials vs. Solid Axles. . 2. 6...

  8. The New Small Wheel

    E-Print Network [OSTI]

    Boukli Hacene, Ghouthi

    2015-01-01

    The E-Link is the part that has to be added to the firmware in order to allow communication and configuration through the E-Link, which is a serial link. In this step we have to integrate the E-Link, so the data must be encoded using 8b/10b encoding and serialized before send it out through the E-link. We have to use the Ethernet FIFO as the source of data, which will be used to communicate with the L1DDC (Level-1 Data Driver Card).

  9. The Wheel of Fate 

    E-Print Network [OSTI]

    Piacentini, Valerie, with poetry by Sheila Clark

    1980-01-01

    died away, and Jim lay deathly stil.l. Hankin., checlwd his pulse, and straightened with a sigh. "I'm sorry it took lilG so long to got here - a di fHcul t conf'1noment - I must get back soon. There's nothing more I can do hore for tho moment." "But...

  10. The Wheel Turns 

    E-Print Network [OSTI]

    Piacentini, Valerie

    1977-01-01

    in the street. IIJim, corne herso I wBnt to telk to yoU.'I Kirk cems over and knelt 8t Spock's feet, resting hL.;) erms on th(:) Vul can IS knee-3 9 end looking up anxiously into his feee. "What is it, Spack? Have I done something '"rang?" "Of course not...

  11. Reinventing the Wheel

    E-Print Network [OSTI]

    Hacker, Randi

    2009-10-28

    Broadcast Transcript: You heard it here before though maybe not first: China invented everything. From gunpowder to the wheelbarrow to paper and ink, it was made in China first. Which puts the Chinese in a bind. I mean, ...

  12. Of Wings and Wheels 

    E-Print Network [OSTI]

    Wood, Alice

    2007-01-01

    What are the biblical cherubim? In the Hebrew Bible, the physical appearance and cultic role of the cherubim are never explicitly elucidated. Largely, the authors assume their audience is familiar with the form and ...

  13. FY2014 Electric Drive Technologies Annual Progress Report

    SciTech Connect (OSTI)

    2014-12-01

    The Electric Drive Technologies research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research is focused on developing power electronics (PE), electric motor, and traction drive system (TDS) technologies that will reduce system cost and improve their efficiency in transforming battery energy to useful work. The R&D is also aimed at better understanding and improving how various components of tomorrow’s automobiles will function as a unified system to improve fuel efficiency.

  14. High-current cyclotron to drive an electronuclear assembly

    E-Print Network [OSTI]

    Alenitsky, Yu G

    2002-01-01

    The proposal on creation of a high-current cyclotron complex for driving an electronuclear assembly reported at the 17th Meeting on Accelerators of Charged Particles is discussed. Some changes in the basic design parameters of the accelerator are considered in view of new results obtained in the recent works. It is shown that the cyclotron complex is now the most real and cheapest accelerator for production of proton beams with a power of up to 10 MW. Projects on design of a high-current cyclotron complex for driving an electronuclear subcritical assembly are presented.

  15. Electric machine and current source inverter drive system

    DOE Patents [OSTI]

    Hsu, John S

    2014-06-24

    A drive system includes an electric machine and a current source inverter (CSI). This integration of an electric machine and an inverter uses the machine's field excitation coil for not only flux generation in the machine but also for the CSI inductor. This integration of the two technologies, namely the U machine motor and the CSI, opens a new chapter for the component function integration instead of the traditional integration by simply placing separate machine and inverter components in the same housing. Elimination of the CSI inductor adds to the CSI volumetric reduction of the capacitors and the elimination of PMs for the motor further improve the drive system cost, weight, and volume.

  16. Direct Current Measurement Based Steer-By-Wire Systems for Realistic Driving Feeling

    E-Print Network [OSTI]

    Ryu, Jee-Hwan

    , and less injury in case of car accidents. However, there are also numbers of disadvantages due to the lack given by a driver is transmitted to the road wheels through electrical wires while this signal several advantages such as lager space in the cabin, freedom in car interior design, no oil leaking

  17. Gas Powered Air Conditioning Absorption vs. Engine-Drive 

    E-Print Network [OSTI]

    Phillips, J. N.

    1996-01-01

    not a new technology at the time, neither was the gas engine. But now in the 19901s, gas engine-drive (GED) chillers have "hit" the air conditioning market with a "bang". In the Lone Star Gas Company area in 1995, GED chillers are now being considered...

  18. Important driving forces in livestock production and agriculture

    E-Print Network [OSTI]

    Archer, Steven R.

    global shifts in consumption, marketing, production and trade: Rising incomes. Demographic shifts#12;Important driving forces in livestock production and agriculture are responsible for major the past four decades, but increasing trends due to changes in land use and crop production shifting from

  19. The driving force of plate tectonics evaluated in spherical coordinates 

    E-Print Network [OSTI]

    Donahue, John Michael

    1985-01-01

    &' + Ri according to the force balance equation of Garison et al (1983) . The age weighting for a ridge-push driving force model is only the age, t. 13 magnetic linea tio ns I subduction boundary force vector FIG. 4. Trench segmentation scheme. I...

  20. Building Life Cycle Assessment: Marine Drive Residence at

    E-Print Network [OSTI]

    and the results for Marine Drive Residence were compared with other residences studied on a per square foot basis that was not completely finished being developed (ie. build 51 of version 4). In addition, an energy model was prepared................................................................................................................ 10 3.1.6 Footings.................................

  1. Driving Pattern Recognition for Control of Hybrid Electric Trucks

    E-Print Network [OSTI]

    Peng, Huei

    strategy is to minimize fuel consumption and engine-out NOx and PM emissions on a set of diversified is selected adaptively. This "multi-mode" control scheme was tested on several driving cycles and was found was initiated, aiming to duplicate the success of the hybrid powertrain on passenger cars to light and heavy

  2. Fuzzy logic control implementation in sensorless PM drive systems

    E-Print Network [OSTI]

    , Egypt Abstract The PM motor drive systems are becoming particularly popular in many industrial power switches are controlled directly from the rotor position sensor. An open-loop configuration is essential for controlling the power devices of the inverter. The main problem with present rotor position

  3. Series Input Modular Architecture for Driving Multiple LEDs

    E-Print Network [OSTI]

    regulation is provided using a prototype of the proposed system with four series buck- boost converter cells, zane}@colorado.edu Abstract ­ This paper introduces a modular power converter architecture based on series input connected converter cells with independent outputs that each drive a small series string

  4. Improved current and charge amplifiers for driving piezoelectric loads

    E-Print Network [OSTI]

    Fleming, Andrew J.

    across the diverse literature involving piezoelectric applications is the problem of hysteresis5,7 . WhenImproved current and charge amplifiers for driving piezoelectric loads Andrew J. Fleming and S. O, Callaghan 2308, Australia. ABSTRACT Piezoelectric transducers are known to exhibit less hysterisis when

  5. Physical Mechanisms Driving Harmful Algal Blooms Along the Texas Coast 

    E-Print Network [OSTI]

    Ogle, Marcus 1982-

    2012-12-12

    -Louisiana shelf (TLS) however, blooms of K. brevis are infrequent and sporadic. While much is known of the blooms along the WFS due to their frequent presence, little is known of the mechanisms driving the blooms along the TLS due to their inconsistent presence...

  6. innovati nWind Turbine Design Innovations Drive Industry Transformation

    E-Print Network [OSTI]

    innovati nWind Turbine Design Innovations Drive Industry Transformation For more than 20 years. Tackling Turbine Blade Inefficiencies In 1984, NREL researchers began investigating problems with wind turbine blade designs. Inefficiency was a significant barrier to lowering the cost of wind energy

  7. Saving power without compromising disk drive reliability Xenia Mountrouidou

    E-Print Network [OSTI]

    Butt, Ali R.

    Saving power without compromising disk drive reliability Xenia Mountrouidou College of William intervals for power savings within strict constraints: first, it is imperative to contain the delays in service of IO requests that occur during power savings since the time to bring up the disk

  8. Driving Major Solar Flares and Eruptions: Carolus J. Schrijver

    E-Print Network [OSTI]

    Schrijver, Karel

    Driving Major Solar Flares and Eruptions: A Review Carolus J. Schrijver Lockheed Martin Adv. Techn: emerging flux 1 Introduction We have known of the phenomenon called 'solar flare' ever since the first,000 refereed publications with the words 'flare' and 'Sun' or 'solar' in the abstract. Even the limited focus

  9. Computer Simulation Suggests Mechanisms That Drive Jovian Jet Streams

    E-Print Network [OSTI]

    Computer Simulation Suggests Mechanisms That Drive Jovian Jet Streams 06 September 2005 Lori Stiles activity may explain the multiple east-west jet streams on Jupiter and Saturn and even produce strong winds are driven. Scientists have been trying to understand the mechanisms that form the jet streams and control

  10. Anti-cancer Technology Summary 121 Research Drive, Suite 501

    E-Print Network [OSTI]

    Peak, Derek

    Anti-cancer Technology Summary 121 Research Drive, Suite 501 Saskatoon, SK, S7N 1K2 Tel: (306) 966 cancers are ranked 2ed , 3ed and 11th of the most diagnosed cancers (National Cancer Institute, USA cancer cells but also healthy ones. A great opportunity exists for targeted therapies for the use solely

  11. nrel.gov/continuum Issue 3 Driving Solar Innovations from

    E-Print Network [OSTI]

    nrel.gov/continuum Issue 3 Spectrum The NREL of NREL Leads Driving Solar Innovations from Reaping a Wind Farm Modeling Research Laboratory to Marketplace Harvest of Hope Clean Energy Innovation NREL Visitors touring the National Renewable Energy Laboratory (NREL) are often amazed at the scope of our

  12. Beyond ITER: RF Heating and Current Drive Issues for DEMO

    E-Print Network [OSTI]

    Princeton Plasma Physics Laboratory

    Current devices Need flexible RF systems for heating, CD, start-up, instability suppression, and profileBeyond ITER: RF Heating and Current Drive Issues for DEMO C. K. Phillips, J. C. Hosea, G. Taylor under development ­ May need Lower Hybrid for r/a > 0.6 (not currently on ITER) ­ Need feedback control

  13. Meiotic drive and sex determination: molecular and cytological mechanisms

    E-Print Network [OSTI]

    Rutkowska, Joanna

    Review Meiotic drive and sex determination: molecular and cytological mechanisms of sex ratio across ecological and social environments should favour the evolution of sex-determining mechanisms that enable adjustment of brood sex ratio to the context of breeding. Despite the expectation that genetic sex

  14. Battery-Aware Energy-Optimal Electric Vehicle Driving Management

    E-Print Network [OSTI]

    Al Faruque, Mohammad Abdullah

    of replacing the battery, e.g. 12,000$ for Tesla Model S 85KWh [4] and 5,500$ for Nissan Leaf S [5], extendingBattery-Aware Energy-Optimal Electric Vehicle Driving Management Korosh Vatanparvar, Jiang Wan environmental concerns, e.g. air pollution. However, EVs pose new challenges regarding their Battery Life

  15. Compatibility Between GFCI Breakers and Household Adjustable Speed Drives

    E-Print Network [OSTI]

    Kimball, Jonathan W.

    Compatibility Between GFCI Breakers and Household Adjustable Speed Drives Jonathan Kimball Senior circuit interrupter (GFCI) compatibility becomes crucial. As compared to industrial applications, the GFCI response of a commonly-used GFCI breaker is compared to the common-mode current of a commercially

  16. A novel Stirling engine with an elliptic drive

    SciTech Connect (OSTI)

    Fang, H.W.; Herold, K.E.; Holland, H.M.; Beach, E.H.

    1996-12-31

    The concept of the Stirling cycle seems quite simple when presented as a cycle involving two constant temperature and two constant volume processes. The reality of machines that have evolved from the Stirling concept is considerably more complicated. Most real machines employ a drive mechanism that approximates a sinusoidal volume variation for each of the cylinders. This results in an overall volume variation that only poorly approximates the constant volume processes postulated in the classic definition of a Stirling cycle. The difficulties of achieving the piston motions necessary to attain the discontinuous motions of the classic cycle are well known and, as a result, the sinusoidal motions are widely accepted as an inevitable compromise. It is noted that free piston Stirling machines are not constrained in the same manner. However, the discussion here focuses on kinematic drive machines. In the current study, a Rider-type engine with an elliptic drive is modeled with the objective of clarifying the potential of a more ideal volume variation. This drive mechanism is the subject of a US Patent filed with Serial Number 08/360,052 on 20 December 1994.

  17. Microbial immobilization drives nitrogen cycling differences among plant species

    E-Print Network [OSTI]

    Thomas, David D.

    1840 Microbial immobilization drives nitrogen cycling differences among plant species Ramesh cycling. We examined four potential mechanisms of plant species effects on nitrogen (N) cycling. We found no species differences in gross ammonification suggesting there are no changes in the ecosystem N cycling

  18. Physical model of a hybrid electric drive train

    E-Print Network [OSTI]

    Young, Brady W. (Brady William)

    2006-01-01

    A motor and flywheel system was designed to simulate the dynamics of the electric drive train and inertial mass of a hybrid electric vehicle. The model will serve as a test bed for students in 2.672 to study the energy ...

  19. Electric Drive Vehicles: A Huge New Distributed Energy Resource

    E-Print Network [OSTI]

    Firestone, Jeremy

    Electric Drive Vehicles: A Huge New Distributed Energy Resource Alec Brooks AC Propulsion, Inc. San Economist, (Feb 8, 2001) "We can use the energy unit in this car for homes or stationary power." "When Dimas, California www.acpropulsion.com #12;The Old and the New.. Old way of thinking: Electric vehicles

  20. Aalborg Universitet Product Sound: Acoustically pleasant motor drives

    E-Print Network [OSTI]

    Mathe, Laszlo

    pleasant motor drives. Department of Energy Technology, Aalborg University. General rights Copyright Institute of Energy Technology June, 2010 #12;Aalborg University Department of Energy Technology Pontoppidanstraede 101 DK-9220 Aalborg East Denmark Web address: http://www.et.aau.dk Copyright © László Máthé, 2010

  1. 2030 SE Marine Science Drive Newport, Oregon 973665-5296

    E-Print Network [OSTI]

    Wright, Dawn Jeannine

    2030 SE Marine Science Drive Newport, Oregon 973665-5296 Telephone 541-867-0100 Fax 541-867-0138 Web Page http://hmsc.oregonstate.edu Oregon State University Hatfield Marine Science Center 2006.....................................2 Coastal Oregon Marine Experiment Station...........................2 OSU-COMES Seafood Research

  2. Well-to-wheels energy use and greenhouse gas emissions analysis of plug-in hybrid electric vehicles.

    SciTech Connect (OSTI)

    Elgowainy, A.; Burnham, A.; Wang, M.; Molburg, J.; Rousseau, A.; Energy Systems

    2009-03-31

    Researchers at Argonne National Laboratory expanded the Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET) model and incorporated the fuel economy and electricity use of alternative fuel/vehicle systems simulated by the Powertrain System Analysis Toolkit (PSAT) to conduct a well-to-wheels (WTW) analysis of energy use and greenhouse gas (GHG) emissions of plug-in hybrid electric vehicles (PHEVs). The WTW results were separately calculated for the blended charge-depleting (CD) and charge-sustaining (CS) modes of PHEV operation and then combined by using a weighting factor that represented the CD vehicle-miles-traveled (VMT) share. As indicated by PSAT simulations of the CD operation, grid electricity accounted for a share of the vehicle's total energy use, ranging from 6% for a PHEV 10 to 24% for a PHEV 40, based on CD VMT shares of 23% and 63%, respectively. In addition to the PHEV's fuel economy and type of on-board fuel, the marginal electricity generation mix used to charge the vehicle impacted the WTW results, especially GHG emissions. Three North American Electric Reliability Corporation regions (4, 6, and 13) were selected for this analysis, because they encompassed large metropolitan areas (Illinois, New York, and California, respectively) and provided a significant variation of marginal generation mixes. The WTW results were also reported for the U.S. generation mix and renewable electricity to examine cases of average and clean mixes, respectively. For an all-electric range (AER) between 10 mi and 40 mi, PHEVs that employed petroleum fuels (gasoline and diesel), a blend of 85% ethanol and 15% gasoline (E85), and hydrogen were shown to offer a 40-60%, 70-90%, and more than 90% reduction in petroleum energy use and a 30-60%, 40-80%, and 10-100% reduction in GHG emissions, respectively, relative to an internal combustion engine vehicle that used gasoline. The spread of WTW GHG emissions among the different fuel production technologies and grid generation mixes was wider than the spread of petroleum energy use, mainly due to the diverse fuel production technologies and feedstock sources for the fuels considered in this analysis. The PHEVs offered reductions in petroleum energy use as compared with regular hybrid electric vehicles (HEVs). More petroleum energy savings were realized as the AER increased, except when the marginal grid mix was dominated by oil-fired power generation. Similarly, more GHG emissions reductions were realized at higher AERs, except when the marginal grid generation mix was dominated by oil or coal. Electricity from renewable sources realized the largest reductions in petroleum energy use and GHG emissions for all PHEVs as the AER increased. The PHEVs that employ biomass-based fuels (e.g., biomass-E85 and -hydrogen) may not realize GHG emissions benefits over regular HEVs if the marginal generation mix is dominated by fossil sources. Uncertainties are associated with the adopted PHEV fuel consumption and marginal generation mix simulation results, which impact the WTW results and require further research. More disaggregate marginal generation data within control areas (where the actual dispatching occurs) and an improved dispatch modeling are needed to accurately assess the impact of PHEV electrification. The market penetration of the PHEVs, their total electric load, and their role as complements rather than replacements of regular HEVs are also uncertain. The effects of the number of daily charges, the time of charging, and the charging capacity have not been evaluated in this study. A more robust analysis of the VMT share of the CD operation is also needed.

  3. Polar-direct-drive experiments on the National Ignition Facility

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Hohenberger, M.; Radha, P. B.; Myatt, J. F.; LePape, S.; Marozas, J. A.; Marshall, F. J.; Michel, D. T.; Regan, S. P.; Seka, W.; Shvydky, A.; et al

    2015-05-11

    To support direct-drive inertial confinement fusion experiments at the National Ignition Facility (NIF) [G. H. Miller, E. I. Moses, and C. R. Wuest, Opt. Eng. 43, 2841 (2004)] in its indirect-drive beam configuration, the polar-direct-drive (PDD) concept [S. Skupsky et al., Phys. Plasmas 11, 2763 (2004)] has been proposed. Ignition in PDD geometry requires direct-drive–specific beam smoothing, phase plates, and repointing the NIF beams toward the equator to ensure symmetric target irradiation. First experiments to study the energetics and preheat in PDD implosions at the NIF have been performed. These experiments utilize the NIF in its current configuration, including beammore »geometry, phase plates, and beam smoothing. Room-temperature, 2.2-mm-diam plastic shells filled with D? gas were imploded with total drive energies ranging from ~500 to 750 kJ with peak powers of 120 to 180 TW and peak on-target irradiances at the initial target radius from 8 10¹? to 1.2 10¹?W/cm². Results from these initial experiments are presented, including measurements of shell trajectory, implosion symmetry, and the level of hot-electron preheat in plastic and Si ablators. Experiments are simulated with the 2-D hydrodynamics code DRACO including a full 3-D ray-trace to model oblique beams, and models for nonlocal electron transport and cross-beam energy transport (CBET). These simulations indicate that CBET affects the shell symmetry and leads to a loss of energy imparted onto the shell, consistent with the experimental data.« less

  4. Polar-direct-drive experiments on the National Ignition Facility

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Hohenberger, M. [Lab. for Laser Energetics, University of Rochester, Rochester, NY (United States)] (ORCID:0000000258879711); Radha, P. B. [Lab. for Laser Energetics, University of Rochester, Rochester, NY (United States); Myatt, J. F. [Lab. for Laser Energetics, University of Rochester, Rochester, NY (United States); LePape, S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Marozas, J. A. [Lab. for Laser Energetics, University of Rochester, Rochester, NY (United States); Marshall, F. J. [Lab. for Laser Energetics, University of Rochester, Rochester, NY (United States); Michel, D. T. [Lab. for Laser Energetics, University of Rochester, Rochester, NY (United States)] (ORCID:0000000166894359); Regan, S. P. [Lab. for Laser Energetics, University of Rochester, Rochester, NY (United States); Seka, W. [Lab. for Laser Energetics, University of Rochester, Rochester, NY (United States); Shvydky, A. [Lab. for Laser Energetics, University of Rochester, Rochester, NY (United States); Sangster, T. C. [Lab. for Laser Energetics, University of Rochester, Rochester, NY (United States)] (ORCID:0000000340402672); Bates, J. W. [U. S. Naval Research Lab., Washington, DC (United States)] (ORCID:0000000188087240); Betti, R. [Lab. for Laser Energetics, University of Rochester, Rochester, NY (United States); Boehly, T. R. [Lab. for Laser Energetics, University of Rochester, Rochester, NY (United States); Bonino, M. J. [Lab. for Laser Energetics, University of Rochester, Rochester, NY (United States); Casey, D. T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Collins, T. J. B. [Lab. for Laser Energetics, University of Rochester, Rochester, NY (United States); Craxton, R. S. [Lab. for Laser Energetics, University of Rochester, Rochester, NY (United States)] (ORCID:0000000158858227); Delettrez, J. A. [Lab. for Laser Energetics, University of Rochester, Rochester, NY (United States); Edgell, D. H. [Lab. for Laser Energetics, University of Rochester, Rochester, NY (United States); Epstein, R. [Lab. for Laser Energetics, University of Rochester, Rochester, NY (United States)] (ORCID:0000000340628444); Fiksel, G. [Lab. for Laser Energetics, University of Rochester, Rochester, NY (United States); Fitzsimmons, P. [General Atomics, San Diego, CA (United States); Frenje, J. A. [MIT (Massachusetts Inst. of Technology), Cambridge, MA (United States)] (ORCID:0000000168460378); Froula, D. H. [Lab. for Laser Energetics, University of Rochester, Rochester, NY (United States); Goncharov, V. N. [Lab. for Laser Energetics, University of Rochester, Rochester, NY (United States); Harding, D. R. [Lab. for Laser Energetics, University of Rochester, Rochester, NY (United States); Kalantar, D. H. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Karasik, M. [U. S. Naval Research Lab., Washington, DC (United States); Kessler, T. J. [Lab. for Laser Energetics, University of Rochester, Rochester, NY (United States); Kilkenny, J. D. [General Atomics, San Diego, CA (United States); Knauer, J. P. [Lab. for Laser Energetics, University of Rochester, Rochester, NY (United States); Kurz, C. [General Atomics, San Diego, CA (United States); Lafon, M. [Lab. for Laser Energetics, University of Rochester, Rochester, NY (United States); LaFortune, K. N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); MacGowan, B. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Mackinnon, A. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); MacPhee, A. G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)] (ORCID:0000000341604479); McCrory, R. L. [Lab. for Laser Energetics, University of Rochester, Rochester, NY (United States); McKenty, P. W. [Lab. for Laser Energetics, University of Rochester, Rochester, NY (United States); Meeker, J. F. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meyerhofer, D. D. [Lab. for Laser Energetics, University of Rochester, Rochester, NY (United States)

    2015-05-01

    To support direct-drive inertial confinement fusion experiments at the National Ignition Facility (NIF) [G. H. Miller, E. I. Moses, and C. R. Wuest, Opt. Eng. 43, 2841 (2004)] in its indirect-drive beam configuration, the polar-direct-drive (PDD) concept [S. Skupsky et al., Phys. Plasmas 11, 2763 (2004)] has been proposed. Ignition in PDD geometry requires direct-drive–specific beam smoothing, phase plates, and repointing the NIF beams toward the equator to ensure symmetric target irradiation. First experiments to study the energetics and preheat in PDD implosions at the NIF have been performed. These experiments utilize the NIF in its current configuration, including beam geometry, phase plates, and beam smoothing. Room-temperature, 2.2-mm-diam plastic shells filled with D? gas were imploded with total drive energies ranging from ~500 to 750 kJ with peak powers of 120 to 180 TW and peak on-target irradiances at the initial target radius from 8 10¹? to 1.2 10¹?W/cm². Results from these initial experiments are presented, including measurements of shell trajectory, implosion symmetry, and the level of hot-electron preheat in plastic and Si ablators. Experiments are simulated with the 2-D hydrodynamics code DRACO including a full 3-D ray-trace to model oblique beams, and models for nonlocal electron transport and cross-beam energy transport (CBET). These simulations indicate that CBET affects the shell symmetry and leads to a loss of energy imparted onto the shell, consistent with the experimental data.

  5. Polar-direct-drive experiments on the national ignition facilitya)

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Hohenberger, M.; Radha,, P. B.; Myatt, J. F.; LePape, S.; Marozas,, J. A.; Marshall, F. J.; Michel, D. T.; Regan, S. P.; Seka, W.; Shvydky, A.; et al

    2015-05-01

    To support direct-drive inertial confinement fusion experiments at the National Ignition Facility (NIF) [G. H. Miller, E. I. Moses, and C. R. Wuest, Opt. Eng. 43, 2841 (2004)] in its indirect-drive beam configuration, the polar-direct-drive (PDD) concept [S. Skupsky et al., Phys. Plasmas 11, 2763 (2004)] has been proposed. Ignition in PDD geometry requires direct-drive–specific beam smoothing, phase plates, and repointing the NIF beams toward the equator to ensure symmetric target irradiation. First experiments to study the energetics and preheat in PDD implosions at the NIF have been performed. These experiments utilize the NIF in its current configuration, including beammore »geometry, phase plates, and beam smoothing. Room-temperature, 2.2-mm-diam plastic shells filled with D? gas were imploded with total drive energies ranging from ~500 to 750 kJ with peak powers of 120 to 180 TW and peak on-target irradiances at the initial target radius from 8 x 10¹? to 1.2 x 10¹?W/cm². Results from these initial experiments are presented, including measurements of shell trajectory, implosion symmetry, and the level of hot-electron preheat in plastic and Si ablators. Experiments are simulated with the 2-D hydrodynamics code DRACO including a full 3-D ray-trace to model oblique beams, and models for nonlocal electron transport and cross-beam energy transport (CBET). These simulations indicate that CBET affects the shell symmetry and leads to a loss of energy imparted onto the shell, consistent with the experimental data.« less

  6. Cost of Ownership and Well-to-Wheels Carbon Emissions/Oil Use of Alternative Fuels and Advanced Light-Duty Vehicle Technologies

    SciTech Connect (OSTI)

    Elgowainy, Mr. Amgad; Rousseau, Mr. Aymeric; Wang, Mr. Michael; Ruth, Mr. Mark; Andress, Mr. David; Ward, Jacob; Joseck, Fred; Nguyen, Tien; Das, Sujit

    2013-01-01

    The U.S. Department of Energy (DOE), Argonne National Laboratory (Argonne), and the National Renewable Energy Laboratory (NREL) updated their analysis of the well-to-wheels (WTW) greenhouse gases (GHG) emissions, petroleum use, and the cost of ownership (excluding insurance, maintenance, and miscellaneous fees) of vehicle technologies that have the potential to significantly reduce GHG emissions and petroleum consumption. The analyses focused on advanced light-duty vehicle (LDV) technologies such as plug-in hybrid, battery electric, and fuel cell electric vehicles. Besides gasoline and diesel, alternative fuels considered include natural gas, advanced biofuels, electricity, and hydrogen. The Argonne Greenhouse Gases, Regulated Emissions, and Energy Use in Transportation (GREET) and Autonomie models were used along with the Argonne and NREL H2A models.

  7. Direct-drive inertial confinement fusion: A review

    SciTech Connect (OSTI)

    Craxton, R. S.; Anderson, K. S.; Boehly, T. R.; Goncharov, V. N.; Harding, D. R.; Knauer, J. P.; McCrory, R. L.; McKenty, P. W.; Meyerhofer, D. D.; Myatt, J. F.; Schmitt, A. J.; Sethian, J. D.; Short, R. W.; Skupsky, S.; Theobald, W.; Kruer, W. L.; Tanaka, K.; Betti, R.; Collins, T. J. B.; Delettrez, J. A.; Hu, S. X.; Marozas, J. A.; Maximov, A. V.; Michel, D. T.; Radha, P. B.; Regan, S. P.; Sangster, T. C.; Seka, W.; Solodov, A. A.; Soures, J. M.; Stoeckl, C.; Zuegel, J. D.

    2015-11-25

    In this study, the direct-drive, laser-based approach to inertial confinement fusion (ICF) is reviewed from its inception following the demonstration of the first laser to its implementation on the present generation of high-power lasers. The review focuses on the evolution of scientific understanding gained from target-physics experiments in many areas, identifying problems that were demonstrated and the solutions implemented. The review starts with the basic understanding of laser–plasma interactions that was obtained before the declassification of laser-induced compression in the early 1970s and continues with the compression experiments using infrared lasers in the late 1970s that produced thermonuclear neutrons. The problem of suprathermal electrons and the target preheat that they caused, associated with the infrared laser wavelength, led to lasers being built after 1980 to operate at shorter wavelengths, especially 0.35 um—the third harmonic of the Nd:glass laser—and 0.248 um (the KrF gas laser). The main physics areas relevant to direct drive are reviewed. The primary absorption mechanism at short wavelengths is classical inverse bremsstrahlung. Nonuniformities imprinted on the target by laser irradiation have been addressed by the development of a number of beam-smoothing techniques and imprint-mitigation strategies. The effects of hydrodynamic instabilities are mitigated by a combination of imprint reduction and target designs that minimize the instability growth rates. Several coronal plasma physics processes are reviewed. The two-plasmon–decay instability, stimulated Brillouin scattering (together with cross-beam energy transfer), and (possibly) stimulated Raman scattering are identified as potential concerns, placing constraints on the laser intensities used in target designs, while other processes (self-focusing and filamentation, the parametric decay instability, and magnetic fields), once considered important, are now of lesser concern for mainline direct-drive target concepts. Filamentation is largely suppressed by beam smoothing. Thermal transport modeling, important to the interpretation of experiments and to target design, has been found to be non-local in nature. Advances in shock timing and equation-of-state measurements relevant to direct-drive ICF are reported. Room-temperature implosions have provided an increased understanding of the importance of stability and uniformity. The evolution of cryogenic implosion capabilities, leading to an extensive series carried out on the 60-beam OMEGA laser [T. R. Boehly et al., Opt. Commun. 133, 495 (1997)], is reviewed together with major advances in cryogenic target formation. A polar-drive concept has been developed that will enable direct-drive–ignition experiments to be performed on the National Ignition Facility [C. A. Haynam et al., Appl. Opt. 46 (16), 3276 (2007)]. The advantages offered by the alternative approaches of fast ignition and shock ignition and the issues associated with these concepts are described. The lessons learned from target-physics and implosion experiments are taken into account in ignition and high-gain target designs for laser wavelengths of 1/3 um and 1/4 um. Substantial advances in direct-drive inertial fusion reactor concepts are reviewed. Overall, the progress in scientific understanding over the past five decades has been enormous, to the point that inertial fusion energy using direct drive shows significant promise as a future environmentally attractive energy source.

  8. PHYSICS OF ELCTRON CYCLOTRON CURRENT DRIVE ON DIII-D

    SciTech Connect (OSTI)

    PETTY,CC; PRATER,R; LUCE,TC; ELLIS,RA; HARVEY,RW; KINSEY,JE; LAO,LL; LOHR,J; MAKOWSKI,MA

    2002-09-01

    OAK A271 PHYSICS OF ELCTRON CYCLOTRON CURRENT DRIVE ON DIII-D. Recent experiments on the DIII-D tokamak have focused on determining the effect of trapped particles on the electron cyclotron current drive (ECCD) efficiency. The measured ECCD efficiency increases as the deposition location is moved towards the inboard midplane or towards smaller minor radius for both co and counter injection. The measured ECCD efficiency also increases with increasing electron density and/or temperature. The experimental ECCD is compared to both the linear theory (Toray-GA) as well as a quasilinear Fokker-Planck model (CQL3D). The experimental ECCD is found to be in better agreement with the more complete Fokker-Planck calculation, especially for cases of high rf power density and/or loop voltage. The narrow width of the measured ECCD profile is consistent with only low levels of radial transport for the current carrying electrons.

  9. Thermal Quantum Speed Limit for Classical-Driving Open Systems

    E-Print Network [OSTI]

    Wenjiong Wu; Kai Yan; Xiang Hao

    2015-10-21

    Quantum speed limit (QSL) time for open systems driven by classical fields is studied in the presence of thermal bosonic environments. The decoherence process is quantitatively described by the time-convolutionless master equation. The evolution speed of an open system is related not only to the strength of driving classical field but also to the environmental temperature. The energy-state population plays a key role in the thermal QSL. Comparing with the zero-temperature reservoir, we predict that the structural reservoir at low temperatures may contribute to the acceleration of quantum decoherence. The manifest oscillation of QSL time takes on under the circumstance of classical driving fields. We also investigate the scaling property of QSL time for multi-particle noninteracting entangled systems. It is demonstrated that entanglement of open systems can be considered as one resource for improving the potential capacity of thermal quantum speedup.

  10. Direct-drive inertial confinement fusion: A review

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Craxton, R. S.; Anderson, K. S.; Boehly, T. R.; Goncharov, V. N.; Harding, D. R.; Knauer, J. P.; McCrory, R. L.; McKenty, P. W.; Meyerhofer, D. D.; Myatt, J. F.; et al

    2015-11-25

    In this study, the direct-drive, laser-based approach to inertial confinement fusion (ICF) is reviewed from its inception following the demonstration of the first laser to its implementation on the present generation of high-power lasers. The review focuses on the evolution of scientific understanding gained from target-physics experiments in many areas, identifying problems that were demonstrated and the solutions implemented. The review starts with the basic understanding of laser–plasma interactions that was obtained before the declassification of laser-induced compression in the early 1970s and continues with the compression experiments using infrared lasers in the late 1970s that produced thermonuclear neutrons. Themore »problem of suprathermal electrons and the target preheat that they caused, associated with the infrared laser wavelength, led to lasers being built after 1980 to operate at shorter wavelengths, especially 0.35 um—the third harmonic of the Nd:glass laser—and 0.248 um (the KrF gas laser). The main physics areas relevant to direct drive are reviewed. The primary absorption mechanism at short wavelengths is classical inverse bremsstrahlung. Nonuniformities imprinted on the target by laser irradiation have been addressed by the development of a number of beam-smoothing techniques and imprint-mitigation strategies. The effects of hydrodynamic instabilities are mitigated by a combination of imprint reduction and target designs that minimize the instability growth rates. Several coronal plasma physics processes are reviewed. The two-plasmon–decay instability, stimulated Brillouin scattering (together with cross-beam energy transfer), and (possibly) stimulated Raman scattering are identified as potential concerns, placing constraints on the laser intensities used in target designs, while other processes (self-focusing and filamentation, the parametric decay instability, and magnetic fields), once considered important, are now of lesser concern for mainline direct-drive target concepts. Filamentation is largely suppressed by beam smoothing. Thermal transport modeling, important to the interpretation of experiments and to target design, has been found to be non-local in nature. Advances in shock timing and equation-of-state measurements relevant to direct-drive ICF are reported. Room-temperature implosions have provided an increased understanding of the importance of stability and uniformity. The evolution of cryogenic implosion capabilities, leading to an extensive series carried out on the 60-beam OMEGA laser [T. R. Boehly et al., Opt. Commun. 133, 495 (1997)], is reviewed together with major advances in cryogenic target formation. A polar-drive concept has been developed that will enable direct-drive–ignition experiments to be performed on the National Ignition Facility [C. A. Haynam et al., Appl. Opt. 46 (16), 3276 (2007)]. The advantages offered by the alternative approaches of fast ignition and shock ignition and the issues associated with these concepts are described. The lessons learned from target-physics and implosion experiments are taken into account in ignition and high-gain target designs for laser wavelengths of 1/3 um and 1/4 um. Substantial advances in direct-drive inertial fusion reactor concepts are reviewed. Overall, the progress in scientific understanding over the past five decades has been enormous, to the point that inertial fusion energy using direct drive shows significant promise as a future environmentally attractive energy source.« less

  11. Optimal Electron Energies for Driving Chromospheric Evaporation in Solar Flares

    E-Print Network [OSTI]

    Reep, Jeffrey; Alexander, David

    2015-01-01

    In the standard model of solar flares, energy deposition by a beam of electrons drives strong chromospheric evaporation leading to a significantly denser corona and much brighter emission across the spectrum. Chromospheric evaporation was examined in great detail by Fisher, Canfield, & McClymont (1985a,b,c), who described a distinction between two different regimes, termed explosive and gentle evaporation. In this work, we examine the importance of electron energy and stopping depths on the two regimes and on the atmospheric response. We find that with explosive evaporation, the atmospheric response does not depend strongly on electron energy. In the case of gentle evaporation, lower energy electrons are significantly more efficient at heating the atmosphere and driving up-flows sooner than higher energy electrons. We also find that the threshold between explosive and gentle evaporation is not fixed at a given beam energy flux, but also depends strongly on the electron energy and duration of heating. Furt...

  12. Direct Fusion Drive for a Human Mars Orbital Mission

    SciTech Connect (OSTI)

    Paluszek, Michael; Pajer, Gary; Razin, Yosef; Slonaker, James; Cohen, Samuel; Feder, Russ; Griffin, Kevin; Walsh, Matthew

    2014-08-01

    The Direct Fusion Drive (DFD) is a nuclear fusion engine that produces both thrust and electric power. It employs a field reversed configuration with an odd-parity rotating magnetic field heating system to heat the plasma to fusion temperatures. The engine uses deuterium and helium-3 as fuel and additional deuterium that is heated in the scrape-off layer for thrust augmentation. In this way variable exhaust velocity and thrust is obtained.

  13. Extended cage adjustable speed electric motors and drive packages

    DOE Patents [OSTI]

    Hsu, John S. (Oak Ridge, TN)

    1999-01-01

    The rotor cage of a motor is extended, a second stator is coupled to this extended rotor cage, and the windings have the same number of poles. The motor torque and speed can be controlled by either injecting energy into or extracting energy out from the rotor cage. The motor produces less harmonics than existing doubly-fed motors. Consequently, a new type of low cost, high efficiency drive is produced.

  14. Extended cage adjustable speed electric motors and drive packages

    DOE Patents [OSTI]

    Hsu, J.S.

    1999-03-23

    The rotor cage of a motor is extended, a second stator is coupled to this extended rotor cage, and the windings have the same number of poles. The motor torque and speed can be controlled by either injecting energy into or extracting energy out from the rotor cage. The motor produces less harmonics than existing doubly-fed motors. Consequently, a new type of low cost, high efficiency drive is produced. 12 figs.

  15. Off-Axis Undulator Radiation for CLIC Drive Beam Diagnostics

    E-Print Network [OSTI]

    Jeff, A; Welsch, CP

    2013-01-01

    The Compact LInear Collider (CLIC) will use a novel acceleration scheme in which energy extracted from a very intense beam of relatively low-energy electrons (the Drive Beam) is used to accelerate a lower intensity Main Beam to very high energy. The high intensity of the Drive Beam, with pulses of more than 1015 electrons, poses a challenge for conventional profile measurements such as wire scanners. Thus, new non-invasive profile measurements are being investigated. In this paper we propose the use of relatively inexpensive permanent-magnet undulators to generate off-axis visible Synchrotron Radiation from the CLIC Drive Beam. The field strength and period length of the undulator should be designed such that the on-axis undulator wavelength is in the ultra-violet. A smaller but still useable amount of visible light is then generated in a hollow cone. This light can be reflected out of the beam pipe by a ring-shaped mirror placed downstream and imaged on a camera. In this contribution, results of SRW and ZEMA...

  16. A Drive Laser for Multi-Bunch Photoinjector Operation

    SciTech Connect (OSTI)

    Gibson, D J; Cormier, E; Messerly, M J; Prantil, M A; Barty, C J

    2012-05-11

    Numerous electron beam applications would benefit from increased average current without sacrificing beam brightness. Work is underway at LLNL to investigate the performance of X-band photoinjectors that would generate electron bunches at a rate matching the RF drive frequency, i.e. one bunch per RF cycle. A critical part of this effort involves development of photo-cathode drive laser technology. Here we present a new laser architecture that can generate pulse trains at repetition rates up to several GHz. This compact, fiber-based system is driven directly by the accelerator RF and so is inherently synchronized with the accelerating fields, and scales readily over a wide range of drive frequencies (L-band through X-band). The system will be required to produce 0.5 {mu}J, {approx}200 fs rise time, spatially and temporally shaped UV pulses designed to optimize the electron beam brightness. Presented is the current status of this system, producing 2 ps pulses from a continuous-wave source.

  17. GPS Data Filtration Method for Drive Cycle Analysis Applications

    SciTech Connect (OSTI)

    Duran, A.; Earleywine, M.

    2013-02-01

    When employing GPS data acquisition systems to capture vehicle drive-cycle information, a number of errors often appear in the raw data samples, such as sudden signal loss, extraneous or outlying data points, speed drifting, and signal white noise, all of which limit the quality of field data for use in downstream applications. Unaddressed, these errors significantly impact the reliability of source data and limit the effectiveness of traditional drive-cycle analysis approaches and vehicle simulation software. Without reliable speed and time information, the validity of derived metrics for drive cycles, such as acceleration, power, and distance, become questionable. This study explores some of the common sources of error present in raw onboard GPS data and presents a detailed filtering process designed to correct for these issues. Test data from both light and medium/heavy duty applications are examined to illustrate the effectiveness of the proposed filtration process across the range of vehicle vocations. Graphical comparisons of raw and filtered cycles are presented, and statistical analyses are performed to determine the effects of the proposed filtration process on raw data. Finally, an evaluation of the overall benefits of data filtration on raw GPS data and present potential areas for continued research is presented.

  18. Simulation of a novel electromechanical engine valve drive to quantify performance gains in fuel consumption

    E-Print Network [OSTI]

    Miller, Justin (Justin Lee)

    2011-01-01

    This thesis describes the modeling and simulation of a novel electromechanical valve drive known as the MIT EMV. This valve drive allows an engine to achieve variable valve timing which has been shown to produce improvements ...

  19. Context and Usability Testing: User-Modeled Information Presentation in Easy and Difficult Driving Conditions 

    E-Print Network [OSTI]

    Hu, John; Winterboer, Andi; Nass, Clifford; Moore, Johanna D.

    2010-11-03

    A 2x2 enhanced Wizard-of-Oz experiment (N = 32) was conducted to compare two different approaches to presenting information to drivers in easy and difficult driving conditions. Data of driving safety, evaluation of ...

  20. Solar wind driving of magnetospheric ULF waves: Field line resonances driven by dynamic pressure fluctuations

    E-Print Network [OSTI]

    Solar wind driving of magnetospheric ULF waves: Field line resonances driven by dynamic pressure observational studies suggest that solar wind dynamic pressure fluctuations can drive magnetosphericFedderMobarry (LFM) global, threedimensional magnetohydrodynamic (MHD) simulations of the solar wind

  1. Analysis and Simulation of Mechanical Trains Driven by Variable Frequency Drive Systems 

    E-Print Network [OSTI]

    Han, Xu

    2012-02-14

    Induction motors and Variable Frequency Drives (VFDs) are widely used in industry to drive machinery trains. However, some mechanical trains driven by VFD-motor systems have encountered torsional vibration problems. This vibration can induce large...

  2. Design and testing of a sensorless switched reluctance motor drive with a custom integrated circuit controller 

    E-Print Network [OSTI]

    Zhang, Yingxia

    1996-01-01

    The switched reluctance motor (SRM) has become an attractive alternative candidate to conventional ae or dc motors for adjustable speed drive applications. The SRM drive system consists of a power converter and a control ...

  3. Hybrid Braking System for Non-Drive Axles | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Braking System for Non-Drive Axles Hybrid Braking System for Non-Drive Axles A hybrid braking system is designed to conserve diesel fuel (or alternative fuels) by using...

  4. US-ABC Collaborates to Lower Cost of Electric Drive Batteries...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    US-ABC Collaborates to Lower Cost of Electric Drive Batteries US-ABC Collaborates to Lower Cost of Electric Drive Batteries April 16, 2013 - 12:00am Addthis The U.S. Advanced...

  5. Energy Department Awards $2.2 Million to Drive Innovative Solutions...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2.2 Million to Drive Innovative Solutions, Lower Costs of Solar Energy Department Awards 2.2 Million to Drive Innovative Solutions, Lower Costs of Solar March 10, 2014 - 12:22pm...

  6. Spring 2012 MIA FARROW'S DARFUR ARCHIVE LOOKING AT WORLD RELIGIONS DRIVING THE ECONOMY

    E-Print Network [OSTI]

    Alpay, S. Pamir

    Spring 2012 MIA FARROW'S DARFUR ARCHIVE · LOOKING AT WORLD RELIGIONS · DRIVING THE ECONOMY GENO, and the hope that they will help make the world a better place. Driving the Economy Mary Holz

  7. FEMP and U.S. Army Corps of Engineers Partner to Drive Down Federal...

    Energy Savers [EERE]

    FEMP and U.S. Army Corps of Engineers Partner to Drive Down Federal Energy Costs FEMP and U.S. Army Corps of Engineers Partner to Drive Down Federal Energy Costs March 26, 2015 -...

  8. The Hydrophobic Effect Drives the Recognition of Hydrocarbons by an Anionic Metal-Ligand Cluster

    E-Print Network [OSTI]

    Biros, Shannon

    2009-01-01

    Drives the Recognition of Hydrocarbons by an Anionic Metal-Drives the Recognition of Hydrocarbons by an Anionic Metal-including saturated hydrocarbons, 11,12 in aqueous solution,

  9. Analysis of Battery Wear and V2G Benefits Using Real-world Drive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Battery Wear and V2G Benefits Using Real-world Drive Cycles and Ambient Data Analysis of Battery Wear and V2G Benefits Using Real-world Drive Cycles and Ambient Data 2011 DOE...

  10. Behavioral Response to Hydrogen Fuel Cell Vehicles and Refueling: Results of California Drive Clinics

    E-Print Network [OSTI]

    Martin, Elliot W; Shaheen, Susan A; Lipman, T E; Lidicker, Jeffrey

    2009-01-01

    about Air Pollution and Electric Vehicles Transportationvehicle, drive clinic, behavioral response, safety perception 1. INTRODUCTION Concerns over air pollution,

  11. Department of Power Electronics and Electrical Drives Prof. Dr.Ing. Joachim Bcker

    E-Print Network [OSTI]

    Paderborn, Universität

    .03.2014 Examination: Mechatronics and Electrical Drives WS 2013 / 2014 Page 1 of 10 Mechatronics und Electrical Drives.03.2014 Examination: Mechatronics and Electrical Drives WS 2013 / 2014 Page 2 of 10 Aufgabe 1: Basic Magnetics (25.03.2014 Examination: Mechatronics and Electrical Drives WS 2013 / 2014 Page 3 of 10 H in A/m 0 B in T 1.0 200 400 1

  12. Design and fabrication of a piezoelectric instrumented suspension for hard disk drives

    E-Print Network [OSTI]

    Horowitz, Roberto

    and low frequency motion while a second stage miniaturized/MEMS actuator close to the head is used drive suspension becomes a major barrier to positioning the read-write head with sufficient precision drives will require much better head po- sitioning accuracy than current drives. The track

  13. Aalborg Universitet Two phase interleaved buck converter for driving high power LEDs

    E-Print Network [OSTI]

    Munk-Nielsen, Stig

    Aalborg Universitet Two phase interleaved buck converter for driving high power LEDs Beczkowski. (2011). Two phase interleaved buck converter for driving high power LEDs. In Proceedings of the 14th #12;Two phase interleaved buck converter for driving high power LEDs Szymon Bczkowski, Stig Munk

  14. Be prepared. Learn how to drive in winter conditions. Winter weather challenges our

    E-Print Network [OSTI]

    Kavanagh, Karen L.

    Be prepared. Learn how to drive in winter conditions. Winter weather challenges our driving skills in cold weather. Watch for"black ice", areas of the road with a thin, almost invisible coating of ice weather. Mother Nature's road test. Know before you go. ShiftIntoWinter.ca | DriveBC.ca This information

  15. MAC in Motion: Impact of Mobility on the MAC of Drive-Thru Internet

    E-Print Network [OSTI]

    Shen, Xuemin "Sherman"

    MAC in Motion: Impact of Mobility on the MAC of Drive-Thru Internet Tom H. Luan, Xinhua Ling decade has made possible for the easy Internet access from a vehicle, notably drive-thru Internet the throughput of DCF in the large scale drive-thru Internet scenario. Our model incorporates the high

  16. Performance Comparison of Hybrid Vehicle Energy Management Controllers on Real-World Drive Cycle Data

    E-Print Network [OSTI]

    Grizzle, Jessy W.

    Performance Comparison of Hybrid Vehicle Energy Management Controllers on Real-World Drive Cycle's highly accurate proprietary vehicle model over large numbers of real- world drive cycles, and compared of Michigan Transportation Research Institute (UMTRI) for providing drive cycle data. of this work focuses

  17. Testing Small Wind Turbine Generators: Design of a Driving Dynamometer Stephen Rehmeyer Pepe

    E-Print Network [OSTI]

    Kammen, Daniel M.

    Testing Small Wind Turbine Generators: Design of a Driving Dynamometer by Stephen Rehmeyer Pepe Sc, Berkeley Spring 2007 #12;Testing Small Wind Turbine Generators: Design of a Driving Dynamometer Copyright c 2007 by Stephen Rehmeyer Pepe #12;Abstract Testing Small Wind Turbine Generators: Design of a Driving

  18. Tensiometer, drive probe for use with environmental testing equipment, and methods of inserting environmental testing equipment into a sample

    DOE Patents [OSTI]

    Hubbell, Joel M.; Sisson, James B.

    2005-07-26

    A method of inserting a tensiometer into a sample, comprises providing a drive probe configured to be engaged by direct push equipment; supporting a porous member from the drive probe; and driving the drive probe into the sample using a cone penetrometer. A tensiometer comprises a drive probe configured to be engaged by direct push equipment or a cone penetrometer; a porous member supported by the drive probe; and a pressure sensor in pressure sensing relation to the porous member.

  19. Progress in Direct-Drive Inertial Confinement Fusion Research at the Laboratory for Laser Energetics

    SciTech Connect (OSTI)

    McCrory, R.L.; Meyerhofer, D.D.; Loucks, S.J.; Skupsky, S.; Betti, R.; Boehly, T.R.; Collins, T.J.B.; Craxton, R.S.; Delettrez, J.A.; Edgell, D.H.; Epstein, R.; Fletcher, K.A.; Freeman, C.; Frenje, J.A.; Glebov, V.Yu.; Goncharov, V.N.; Harding, D.R.; Igumenshchev, I.V.; Keck, R.L.; Kilkenny, J.D.; Knauer, J.P.; Li, C.K.; Marciante, J.; Marozas, J.a.; Marshall, F.J.; Maximov, A.V.; McKenty, P.W.; Morse, S.F.B.; Myatt, J.; Padalino, S.; Petrasso, R.D.; Radha, P.B.; Regan, S.P.; Sangster, T.C.; Seguin, F.H.; Seka, W.; Smalyuk, V.A.; Soures, J.M.; Stoeckl, C.; Yaakobi, B.; Zuegel, J.D.

    2006-06-28

    Direct-drive inertial confinement fusion (ICF) is expected to demonstrate high gain on the National Ignition Facility (NIF) in the next decade and is a leading candidate for inertial fusion energy production. The NIF will initially be configured for x-ray drive and with no beams placed at the target equator to provide a symmetric irradiation of a direct-drive capsule. LLE is developing the “polar-direct-drive” (PDD) approach that repoints beams toward the target equator. Initial 2-D simulations have shown ignition. A unique “Saturn-like” plastic ring around the equator refracts the laser light incident near the equator toward the target, improving the drive uniformity.

  20. Fluid equations in the presence of electron cyclotron current drive

    SciTech Connect (OSTI)

    Jenkins, Thomas G.; Kruger, Scott E. [Tech-X Corporation, 5621 Arapahoe Avenue, Boulder, Colorado 80303 (United States)

    2012-12-15

    Two-fluid equations, which include the physics imparted by an externally applied radiofrequency source near electron cyclotron resonance, are derived in their extended magnetohydrodynamic forms using the formalism of Hegna and Callen [Phys. Plasmas 16, 112501 (2009)]. The equations are compatible with the closed fluid/drift-kinetic model developed by Ramos [Phys. Plasmas 17, 082502 (2010); 18, 102506 (2011)] for fusion-relevant regimes with low collisionality and slow dynamics, and they facilitate the development of advanced computational models for electron cyclotron current drive-induced suppression of neoclassical tearing modes.

  1. Protein folding: A complex potential for the driving force

    E-Print Network [OSTI]

    Chekmarev, Sergei F

    2013-01-01

    Using the Helmholtz decomposition of the vector field of folding fluxes in a reduced space of collective variables, a potential of the driving force for protein folding is determined. The potential has two components and can be written as a complex function. One component is responsible for the source and sink of the folding flows (representing, respectively, the unfolded states and the native state of the protein), and the other accounts for the vorticity of the flow that is produced at the boundaries of the main flow by the contact of the moving folding "fluid" with the quiescent surroundings. The theoretical consideration is illustrated by calculations for a model $\\beta$-hairpin protein.

  2. Shell trajectory measurements from direct-drive implosion experiments

    SciTech Connect (OSTI)

    Michel, D. T.; Sorce, C.; Epstein, R.; Whiting, N.; Igumenshchev, I. V.; Jungquist, R.; Froula, D. H. [Laboratory for Laser Energetics, University of Rochester, 250 East River Road, Rochester, New York 14636 (United States)

    2012-10-15

    A technique to measure the shell trajectory in direct-drive inertial confinement fusion implosions is presented. The x-ray self emission of the target is measured with an x-ray framing camera. Optimized filtering limits the x-ray emission from the corona plasma, isolating a sharp intensity gradient very near the ablation surface. This enables one to measure the radius of the imploding shell with an accuracy better than 1 {mu}m and to determine a 200-ps average velocity to better than 2%.

  3. High transformer ratio drive beams for wakefield accelerator studies

    SciTech Connect (OSTI)

    England, R. J.; Ng, C.-K.; Frederico, J.; Hogan, M. J.; Litos, M.; Muggli, P.; Joshi, C.; An, W.; Andonian, G.; Mori, W.; Lu, W. [SLAC National Accelerator Laboratory, Menlo Park, CA 94025 (United States); Max Planck Institute for Physics, 80805 Munich (Germany); University of California Los Angeles, Los Angeles, CA 90095 (United States); Tsinghua University, Beijing (China)

    2012-12-21

    For wakefield based acceleration schemes, use of an asymmetric (or linearly ramped) drive bunch current profile has been predicted to enhance the transformer ratio and generate large accelerating wakes. We discuss plans and initial results for producing such bunches using the 20 to 23 GeV electron beam at the FACET facility at SLAC National Accelerator Laboratory and sending them through plasmas and dielectric tubes to generate transformer ratios greater than 2 (the limit for symmetric bunches). The scheme proposed utilizes the final FACET chicane compressor and transverse collimation to shape the longitudinal phase space of the beam.

  4. Variable Frequency AC Drives for Cooling Tower Energy Efficiency 

    E-Print Network [OSTI]

    Corey, R. W.

    1982-01-01

    speed and AF drive conversion to adjustable speed. ~I.,.. '~'Fixed r--'T'~Speed ,_0t.11T ~ ! AUTO ~uAL Figure 3 - Fixed &~djustable Speed sJstems I The AF control .unit is placed in the user's motor control center or inl a weather protected..., this ov~r simplified analysis does put this project in a very likely position for budget approval by the Texas Company p~ant management. 5.0 SUMMARY Traditionally, capita~ expense for eqUipment has been submitted for management approval...

  5. Linear hydraulic drive system for a Stirling engine

    DOE Patents [OSTI]

    Walsh, Michael M. (Schenectady, NY)

    1984-02-21

    A hydraulic drive system operating from the periodic pressure wave produced by a Stirling engine along a first axis thereof and effecting transfer of power from the Stirling engine to a load apparatus therefor and wherein the movable, or working member of the load apparatus is reciprocatingly driven along an axis substantially at right angles to the first axis to achieve an arrangement of a Stirling engine and load apparatus assembly which is much shorter and the components of the load apparatus more readily accessible.

  6. Linear hydraulic drive system for a Stirling engine

    SciTech Connect (OSTI)

    Walsh, M.M.

    1984-02-21

    A hydraulic drive system operating from the periodic pressure wave produced by a Stirling engine along a first axis thereof and effecting transfer of power from the Stirling engine to a load apparatus therefor and wherein the movable, or working member of the load apparatus is reciprocatingly driven along an axis substantially at right angles to the first axis to achieve an arrangement of a Stirling engine and load apparatus assembly which is much shorter and the components of the load apparatus more readily accessible. 2 figs.

  7. MHK Technologies/Direct Drive Power Generation Buoy | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsource HistoryScenarios Towards 2050 JumpCoosSloughAquantisInformation Drive Power

  8. Do You Drive a Hybrid Electric Vehicle? | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based| Department8,Department of Energy2EM'sReportOctober 2015Drive a Hybrid

  9. What Drives U.S. Gasoline Prices? - Energy Information Administration

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming963 1.969 1.979Coal Consumers inYear Full report What Drives U.S.

  10. Driving for $1.14 Per Gallon | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalentLaboratory |Sectorfor $1.14 Per Gallon Driving for $1.14 Per

  11. Driving the National Parks Forward | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalentLaboratory |Sectorfor $1.14 Per Gallon Driving for $1.14the

  12. The breakdown of superlubricity by driving-induced commensurate dislocations

    E-Print Network [OSTI]

    Andrea Benassi; Ming Ma; Michael Urbakh; Andrea Vanossi

    2015-11-14

    In the framework of a Frenkel-Kontorova-like model, we address the robustness of the superlubricity phenomenon in an edge-driven system at large scales, highlighting the dynamical mechanisms leading to its failure due to the slider elasticity. The results of the numerical simulations perfectly match the length critical size derived from a parameter-free analytical model. By considering different driving and commensurability interface configurations, we explore the distinctive nature of the transition from superlubric to high-friction sliding states which occurs above the critical size, discovering the occurrence of previously undetected multiple dissipative jumps in the friction force as a function of the slider length. These driving-induced commensurate dislocations in the slider are then characterized in relation to their spatial localization and width, depending on the system parameters. Setting the ground to scale superlubricity up, this investigation provides a novel perspective on friction and nanomanipulation experiments and can serve as a theoretical basis for designing high-tech devices with specific superlow frictional features.

  13. Bifurcation and control of chaos in Induction motor drives

    E-Print Network [OSTI]

    Krishnendu Chakrabarty; Urmila Kar

    2014-10-24

    The induction motor controlled by Indirect Field Oriented Control (IFOC) is known to have high performance and better stability. This paper reports the dynamical behavior of an indirect field oriented control (IFOC) induction motor drive in the light of bifurcation theory. The speed of high performance induction motor drive is controlled by IFOC method. The knowledge of qualitative change of the behavior of the motor such as equilibrium points, limit cycles and chaos with the change of motor parameters and load torque are essential for proper control of the motor. This paper provides a numerical approach to understand better the dynamical behavior of an indirect field oriented control of a current-fed induction motor. The focus is on bifurcation analysis of the IFOC motor, with a particular emphasis on the change that affects the dynamics and stability under small variations of Proportional Integral controller (PI) parameters, load torque and k, the ratio of the rotor time constant and its estimate etc. Bifurcation diagrams are computed. This paper also attempts to discuss various types of the transition to chaos in the induction motor. The results of the obtained bifurcation simulations give useful guidelines for adjusting both motor model and PI controller parameters. It is also important to ensure desired operation of the motor when the motor shows chaotic behavior. Infinite numbers of unstable periodic orbits are embedded in a chaotic attractor. Any unstable periodic orbit can be stabilized by proper control algorithm. The delayed feedback control method to control chaos has been implemented in this system.

  14. Penetration of lower hybrid current drive waves in tokamaks

    SciTech Connect (OSTI)

    Horton, W. [The University of Texas at Austin, Austin, Texas 78712 (United States) [The University of Texas at Austin, Austin, Texas 78712 (United States); Aix-Marseille University, 58, Bd Charles Livon, 13284 Marseille (France); Goniche, M.; Peysson, Y.; Decker, J.; Ekedahl, A.; Litaudon, X. [CEA, IRFM, F-13108 Saint-Paul-Lez Durance (France)] [CEA, IRFM, F-13108 Saint-Paul-Lez Durance (France)

    2013-11-15

    Lower hybrid (LH) ray propagation in toroidal plasma is shown to be controlled by combination of the azimuthal spectrum launched by the antenna, the poloidal variation of the magnetic field, and the scattering of the waves by the drift wave fluctuations. The width of the poloidal and radial radio frequency wave spectrum increases rapidly as the rays penetrate into higher density and scatter from the drift waves. The electron temperature gradient (ETG) spectrum is particularly effective in scattering the LH waves due to its comparable wavelengths and phase velocities. ETG turbulence is also driven by the radial gradient of the electron current profile giving rise to an anomalous viscosity spreading the LH driven plasma currents. The LH wave scattering is derived from a Fokker-Planck equation for the distribution of the ray trajectories with diffusivities derived from the drift wave fluctuations. The condition for chaotic diffusion for the rays is derived. The evolution of the poloidal and radial mode number spectrum of the lower hybrid waves are both on the antenna spectrum and the spectrum of the drift waves. Antennas launching higher poloidal mode number spectra drive off-axis current density profiles producing negative central shear [RS] plasmas with improved thermal confinement from ETG transport. Core plasma current drive requires antennas with low azimuthal mode spectra peaked at m = 0 azimuthal mode numbers.

  15. 3-103 The power that could be produced by a water wheel is to be determined. Properties The density of water is taken to be 1000 m3

    E-Print Network [OSTI]

    Bahrami, Majid

    3-52 3-103 The power that could be produced by a water wheel is to be determined. Properties The density of water is taken to be 1000 m3 /kg (Table A-3). Analysis The power production is determined from The mass flow rate through the wind mill is kg/s7.457 /kg)m4(0.8409 m/s)(10m)7( 3 2 11 S v VA m The power

  16. Evidence that solar flares drive global oscillations in the Sun

    E-Print Network [OSTI]

    C. Karoff; H. Kjeldsen

    2008-03-21

    Solar flares are large explosions on the Sun's surface caused by a sudden release of magnetic energy. They are known to cause local short-lived oscillations travelling away from the explosion like water rings. Here we show that the energy in the solar acoustic spectrum is correlated with flares. This means that the flares drive global oscillations in the Sun in the same way that the entire Earth is set ringing for several weeks after a major earthquake like the December 2004 Sumatra-Andaman Earthquake. The correlation between flares and energy in the acoustic spectrum of disk-integrated sunlight is stronger for high-frequency waves than for ordinary p-modes which are excited by the turbulence in the near surface convection zone immediately beneath the photosphere.

  17. Rim-drive cable-aligned heliostat collector system

    DOE Patents [OSTI]

    Dolan, J.E.; Sands, T.D.

    1982-09-30

    Disclosed is a heliostat collector apparatus comprising at least one heliostat suspended from a plurality of longitudinally extending linkage means. An enclosure structure is disposed adjacent the heliostat and provides a means for allowing the heliostat to be substantially protected from weathering. A first drive means is operatively connected to the heliostat to effect steering thereof in at least one of first and second predetermined directions. Finally, a frame member is adapted for supporting the heliostat at an inner portion thereof. The frame includes a plurality of outer expandable portions. Each one of the expandable portions is adapted to slidably engage a corresponding one of the plurality of linkage means. The expandable portions are further adapted to allow the heliostat to be slidably moved along the linkage means in directions away from and towards the enclosure structure and to substantially reduce stress acting on the heliostat during steering.

  18. Electric vehicle drive train with direct coupling transmission

    DOE Patents [OSTI]

    Tankersley, Jerome B. (Fredericksburg, VA); Boothe, Richard W. (Roanoke, VA); Konrad, Charles E. (Roanoke, VA)

    1995-01-01

    An electric vehicle drive train includes an electric motor and an associated speed sensor, a transmission operable in a speed reduction mode or a direct coupled mode, and a controller responsive to the speed sensor for operating the transmission in the speed reduction mode when the motor is below a predetermined value, and for operating the motor in the direct coupled mode when the motor speed is above a predetermined value. The controller reduces the speed of the motor, such as by regeneratively braking the motor, when changing from the speed reduction mode to the direct coupled mode. The motor speed may be increased when changing from the direct coupled mode to the speed reduction mode. The transmission is preferably a single stage planetary gearbox.

  19. Electric vehicle drive train with rollback detection and compensation

    DOE Patents [OSTI]

    Konrad, Charles E. (Roanoke, VA)

    1994-01-01

    An electric vehicle drive train includes a controller for detecting and compensating for vehicle rollback, as when the vehicle is started upward on an incline. The vehicle includes an electric motor rotatable in opposite directions corresponding to opposite directions of vehicle movement. A gear selector permits the driver to select an intended or desired direction of vehicle movement. If a speed and rotational sensor associated with the motor indicates vehicle movement opposite to the intended direction of vehicle movement, the motor is driven to a torque output magnitude as a nonconstant function of the rollback speed to counteract the vehicle rollback. The torque function may be either a linear function of speed or a function of the speed squared.

  20. Compact vehicle drive module having improved thermal control

    DOE Patents [OSTI]

    Meyer, Andreas A.; Radosevich, Lawrence D.; Beihoff, Bruce C.; Kehl, Dennis L.; Kannenberg, Daniel G.

    2006-01-03

    An electric vehicle drive includes a thermal support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support, which may be controlled in a closed-loop manner. Interfacing between circuits, circuit mounting structure, and the support provide for greatly enhanced cooling. The support may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  1. Electric vehicle drive train with rollback detection and compensation

    DOE Patents [OSTI]

    Konrad, C.E.

    1994-12-27

    An electric vehicle drive train includes a controller for detecting and compensating for vehicle rollback, as when the vehicle is started upward on an incline. The vehicle includes an electric motor rotatable in opposite directions corresponding to opposite directions of vehicle movement. A gear selector permits the driver to select an intended or desired direction of vehicle movement. If a speed and rotational sensor associated with the motor indicates vehicle movement opposite to the intended direction of vehicle movement, the motor is driven to a torque output magnitude as a nonconstant function of the rollback speed to counteract the vehicle rollback. The torque function may be either a linear function of speed or a function of the speed squared. 6 figures.

  2. Crossed-beam energy transfer in direct-drive implosions

    SciTech Connect (OSTI)

    Seka, W; Edgell, D H; Michel, D T; Froula, D H; Goncharov, V N; Craxton, R S; Divol, L; Epstein, R; Follett, R; Kelly, J H; Kosc, T Z; Maximov, A V; McCrory, R L; Meyerhofer, D D; Michel, P; Myatt, J F; Sangster, T C; Shvydky, A; Skupsky, S

    2012-05-22

    Direct-drive-implosion experiments on the OMEGA laser [T. R. Boehly et al., Opt. Commun. 133, 495 (1997)] have showed discrepancies between simulations of the scattered (non-absorbed) light levels and measured ones that indicate the presence of a mechanism that reduces laser coupling efficiency by 10%-20%. This appears to be due to crossed-beam energy transfer (CBET) that involves electromagnetic-seeded, low-gain stimulated Brillouin scattering. CBET scatters energy from the central portion of the incoming light beam to outgoing light, reducing the laser absorption and hydrodynamic efficiency of implosions. One-dimensional hydrodynamic simulations including CBET show good agreement with all observables in implosion experiments on OMEGA. Three strategies to mitigate CBET and improve laser coupling are considered: the use of narrow beams, multicolor lasers, and higher-Z ablators. Experiments on OMEGA using narrow beams have demonstrated improvements in implosion performance.

  3. Heel and toe driving on fuel cell vehicle

    DOE Patents [OSTI]

    Choi, Tayoung; Chen, Dongmei

    2012-12-11

    A system and method for providing nearly instantaneous power in a fuel cell vehicle. The method includes monitoring the brake pedal angle and the accelerator pedal angle of the vehicle, and if the vehicle driver is pressing both the brake pedal and the accelerator pedal at the same time and the vehicle is in a drive gear, activating a heel and toe mode. When the heel and toe mode is activated, the speed of a cathode compressor is increased to a predetermined speed set-point, which is higher than the normal compressor speed for the pedal position. Thus, when the vehicle brake is removed, the compressor speed is high enough to provide enough air to the cathode, so that the stack can generate nearly immediate power.

  4. Veeco Develops Tools to Drive Down HBLED Costs

    Broader source: Energy.gov [DOE]

    Veeco is working in partnership with Sandia National Laboratories and Philips Lumileds to drive down the cost of high-brightness LEDs by implementing process simulation tools and by improving temperature measurement and control methods to increase MOCVD yield. Veeco is working with Sandia to reduce the cost of ownership (COO) of the deposition equipment by, for example, using a heated flow flange, which reduces the consumption of the expensive precursors (ammonia, nitrogen, hydrogen, and the metal organics) by 40 percent. Two different types of pyrometers developed by Sandia and Veeco are being tested by Philips Lumileds to control the substrate temperature, which helps determine the color of the LED. If all works according to plan, the COO will be reduced by at least 75 percent by improving throughput, growth uniformity, yield, and temperature stabilization.

  5. Can Protostellar Jets Drive Supersonic Turbulence in Molecular Clouds?

    E-Print Network [OSTI]

    Robi Banerjee; Ralf S. Klessen; Christian Fendt

    2007-06-25

    Jets and outflows from young stellar objects are proposed candidates to drive supersonic turbulence in molecular clouds. Here, we present the results from multi-dimensional jet simulations where we investigate in detail the energy and momentum deposition from jets into their surrounding environment and quantify the character of the excited turbulence with velocity probability density functions. Our study include jet--clump interaction, transient jets, and magnetised jets. We find that collimated supersonic jets do not excite supersonic motions far from the vicinity of the jet. Supersonic fluctuations are damped quickly and do not spread into the parent cloud. Instead subsonic, non-compressional modes occupy most of the excited volume. This is a generic feature which can not be fully circumvented by overdense jets or magnetic fields. Nevertheless, jets are able to leave strong imprints in their cloud structure and can disrupt dense clumps. Our results question the ability of collimated jets to sustain supersonic turbulence in molecular clouds.

  6. Electric vehicle drive train with direct coupling transmission

    DOE Patents [OSTI]

    Tankersley, J.B.; Boothe, R.W.; Konrad, C.E.

    1995-04-04

    An electric vehicle drive train includes an electric motor and an associated speed sensor, a transmission operable in a speed reduction mode or a direct coupled mode, and a controller responsive to the speed sensor for operating the transmission in the speed reduction mode when the motor is below a predetermined value, and for operating the motor in the direct coupled mode when the motor speed is above a predetermined value. The controller reduces the speed of the motor, such as by regeneratively braking the motor, when changing from the speed reduction mode to the direct coupled mode. The motor speed may be increased when changing from the direct coupled mode to the speed reduction mode. The transmission is preferably a single stage planetary gearbox. 6 figures.

  7. A new ignition scheme using hybrid indirect-direct drive for inertial confinement fusion

    E-Print Network [OSTI]

    Fan, Zhengfeng; Dai, Zhensheng; Cai, Hong-bo; Zhu, Shao-ping; Zhang, W Y; He, X T

    2013-01-01

    A new hybrid indirect-direct-drive ignition scheme is proposed for inertial confinement fusion: a cryogenic capsule encased in a hohlraum is first compressed symmetrically by indirect-drive x-rays, and then accelerated and ignited by both direct-drive lasers and x-rays. A steady high-density plateau newly formed between the radiation and electron ablation fronts suppresses the rarefaction at the radiation ablation front and greatly enhances the drive pressure. Meanwhile, multiple shock reflections at the fuel/hot-spot interface are prevented during capsule deceleration. Thus rapid ignition and burn are realized. In comparison with the conventional indirect drive, the hybrid drive implodes the capsule with a higher velocity ($\\sim4.3\\times10^7$ cm/s) and a much lower convergence ratio ($\\sim$25), and the growth of hydrodynamic instabilities is significantly reduced, especially at the fuel/hot-spot interface.

  8. Assessment of gas engine drives for CNG compressors at NGV fueling stations. Final technical report, June 1993-April 1995

    SciTech Connect (OSTI)

    Keder, J.; Darrow, K.G.

    1995-06-01

    This report assesses the technical and economic issues associated with the use of gas engine drives for gas compressors at natural gas vehicle (NGV) fueling stations. The use of gas engine drives and electric motor drives is compared for typical time fill, fast fill, and combined fill applications. NGV fueling station equipment is described with an emphasis on gas engine and electric motor drives, their installation, operation, and maintenance. The economic benefits of gas engine drives and electric motor drives are compared using sensitivity and operating cost analyses. A perspective of the current market for gas engine drives is also presented, as well as several case histories.

  9. Scared Textless: The Influence of Sensation Seeking Tendencies and Need for Cognition on Texting while Driving Fear Appeals 

    E-Print Network [OSTI]

    Boenker, Madeline Lee

    2012-10-19

    , 2009). Statistics of accidents and the dangers of texting while driving are infiltrating the news. Virginia Tech Transportation Institute [VTTI] conducted a series of driving studies to assess the danger of distracted driving. Hanowski, Olson... and the District of Columbia (Copeland, 2010). The United States government is trying to reduce texting while driving with the creation of distraction.gov, a website to inform individuals about the dangers of distracted driving and to promote their recent “Put...

  10. Edge Temperature Gradient as Intrinsic Rotation Drive in AlcatorC...

    Office of Scientific and Technical Information (OSTI)

    Edge Temperature Gradient as Intrinsic Rotation Drive in AlcatorC-Mod Tokamak Plasmas Citation Details In-Document Search Title: Edge Temperature Gradient as Intrinsic Rotation...

  11. AIR LUBRICATION IN HARD DISK DRIVE Mechanics of Contact and Lubrication

    E-Print Network [OSTI]

    Müftü, Sinan

    AIR LUBRICATION IN HARD DISK DRIVE Mechanics of Contact and Lubrication Department of Mechanical & Industrial Engineering Northeastern University Boston, MA 02115 ...................................................................................................................... 6 3. Lubrication

  12. Marketing and Driving Demand Collaborative: Social Media Tools and Strategies Webinar

    Broader source: Energy.gov [DOE]

    Marketing and Driving Demand Collaborative: Social Media Tools and Strategies Webinar, from the U.S. Department of Energy's Better Buildings program.

  13. Optimal investment and scheduling of distributed energy resources with uncertainty in electric vehicles driving schedules

    E-Print Network [OSTI]

    Cardoso, Goncalo

    2014-01-01

    management of small electric energy systems including V2Gand renewable energy sources,” Electric Power Systemsof electric-drive vehicles with renewable energy,” Energy,

  14. Impacts of Cooling Technology on Solder Fatigue for Power Modules in Electric Traction Drive Vehicles: Preprint

    SciTech Connect (OSTI)

    O'Keefe, M.; Vlahinos, A.

    2009-08-01

    Describes three power module cooling topologies for electric traction drive vehicles: two advanced options using jet impingement cooling and one option using pin-fin liquid cooling.

  15. Nano-scale positioning, control and motion planning in hard disk drives

    E-Print Network [OSTI]

    Boettcher, Uwe

    2011-01-01

    C. Bi. Hard disk drive: mechatronics and control. Automationdrive tracking servos. Mechatronics, IEEE/ASME Transactionsin dual-stage hdds. Mechatronics, IEEE/ASME Transactions on,

  16. Advanced Control Algorithms for Discrete Linear Repetitive Processes in Self-servowriting of Hard Disk Drives

    E-Print Network [OSTI]

    Dong, Feng Dan

    2011-01-01

    IEEE/ASME Trans. On Mechatronics, 4(3):312323, 1999. [41] J.in hard disk drives. Mechatronics . 20(1):53-58, 2009. [86

  17. A Strategically Timed Verbal Task Improves Performance and Neurophysiological Alertness During Fatiguing Drives

    E-Print Network [OSTI]

    Atchley, Paul; Chan, Mark; Gregersen, Sabrina

    2013-08-06

    , fatigue inducing, drives which are more typical for motor carrier operators, military operations, or long-distance recreational drives. Second, improved performance was measured primarily by lateral vehicle control. While maintaining a stable lane... sounded if driving speed exceeded 125.53 km/h. Data collection began at the 0.600 km mark and ended at the 177.600 km mark. Data was divided into 9 blocks of 19.733 km. Braking events occurred in the first, fourth, seventh and ninth block of the drive...

  18. International Assessment of Electric-Drive Vehicles: Policies, Markets, and Technologies

    E-Print Network [OSTI]

    Sperling, Daniel; Lipman, Timothy

    2003-01-01

    D. (1995), Future Drive Electric Vehicles and Sustainable1996), "The Case for Electric Vehicles," Sclent~c American,Emissions Impacts of Electric Vehicles," Journal of the Alr

  19. Novel Synthetic Medea Selfish Genetic Elements Drive Population Replacement in Drosophila; a Theoretical Exploration of Medea-

    E-Print Network [OSTI]

    Hay, Bruce A.

    biology, maternal effect, gene drive, mosquito, dengue, malaria Insects act as vectors for a number); dengue, yellow fever, lymphatic filariasis, chikungunya, and Chagas disease (humans); Rift valley fever

  20. FEMP and U.S. Army Corps of Engineers Partner to Drive Down Federal...

    Broader source: Energy.gov (indexed) [DOE]

    of Understanding (MOU) partnership to help drive down the federal government's energy costs through the government-wide adoption of performance contracting processes. The MOU...

  1. Evaluation of 2004 Toyota Prius Hybrid Electric Drive System

    SciTech Connect (OSTI)

    Staunton, R.H.; Ayers, C.W.; Chiasson, J.N.; Burress, B.A.; Marlino, L.D.

    2006-05-01

    The 2004 Toyota Prius is a hybrid automobile equipped with a gasoline engine and a battery- and generator-powered electric motor. Both of these motive-power sources are capable of providing mechanical-drive power for the vehicle. The engine can deliver a peak-power output of 57 kilowatts (kW) at 5000 revolutions per minute (rpm) while the motor can deliver a peak-power output of 50 kW over the speed range of 1200-1540 rpm. Together, this engine-motor combination has a specified peak-power output of 82 kW at a vehicle speed of 85 kilometers per hour (km/h). In operation, the 2004 Prius exhibits superior fuel economy compared to conventionally powered automobiles. To acquire knowledge and thereby improve understanding of the propulsion technology used in the 2004 Prius, a full range of design characterization studies were conducted to evaluate the electrical and mechanical characteristics of the 2004 Prius and its hybrid electric drive system. These characterization studies included (1) a design review, (2) a packaging and fabrication assessment, (3) bench-top electrical tests, (4) back-electromotive force (emf) and locked rotor tests, (5) loss tests, (6) thermal tests at elevated temperatures, and most recently (7) full-design-range performance testing in a controlled laboratory environment. This final test effectively mapped the electrical and thermal results for motor/inverter operation over the full range of speeds and shaft loads that these assemblies are designed for in the Prius vehicle operations. This testing was undertaken by the Oak Ridge National Laboratory (ORNL) as part of the U.S. Department of Energy (DOE)-Energy Efficiency and Renewable Energy (EERE) FreedomCAR and Vehicle Technologies (FCVT) program through its vehicle systems technologies subprogram. The thermal tests at elevated temperatures were conducted late in 2004, and this report does not discuss this testing in detail. The thermal tests explored the derating of the Prius motor design if operated at temperatures as high as is normally encountered in a vehicle engine. The continuous ratings at base speed (1200 rpm) with different coolant temperatures are projected from test data at 900 rpm. A separate, comprehensive report on this thermal control study is available [1].

  2. Evaluation of 2004 Toyota Prius Hybrid Electric Drive System

    SciTech Connect (OSTI)

    Staunton, Robert H; Ayers, Curtis William; Chiasson, J. N.; Burress, Timothy A; Marlino, Laura D

    2006-05-01

    The 2004 Toyota Prius is a hybrid automobile equipped with a gasoline engine and a battery- and generator-powered electric motor. Both of these motive-power sources are capable of providing mechanical-drive power for the vehicle. The engine can deliver a peak-power output of 57 kilowatts (kW) at 5000 revolutions per minute (rpm) while the motor can deliver a peak-power output of 50 kW over the speed range of 1200-1540 rpm. Together, this engine-motor combination has a specified peak-power output of 82 kW at a vehicle speed of 85 kilometers per hour (km/h). In operation, the 2004 Prius exhibits superior fuel economy compared to conventionally powered automobiles. To acquire knowledge and thereby improve understanding of the propulsion technology used in the 2004 Prius, a full range of design characterization studies were conducted to evaluate the electrical and mechanical characteristics of the 2004 Prius and its hybrid electric drive system. These characterization studies included (1) a design review, (2) a packaging and fabrication assessment, (3) bench-top electrical tests, (4) back-electromotive force (emf) and locked rotor tests, (5) loss tests, (6) thermal tests at elevated temperatures, and most recently (7) full-design-range performance testing in a controlled laboratory environment. This final test effectively mapped the electrical and thermal results for motor/inverter operation over the full range of speeds and shaft loads that these assemblies are designed for in the Prius vehicle operations. This testing was undertaken by the Oak Ridge National Laboratory (ORNL) as part of the U.S. Department of Energy (DOE) - Energy Efficiency and Renewable Energy (EERE) FreedomCAR and Vehicle Technologies (FCVT) program through its vehicle systems technologies subprogram. The thermal tests at elevated temperatures were conducted late in 2004, and this report does not discuss this testing in detail. The thermal tests explored the derating of the Prius motor design if operated at temperatures as high as is normally encountered in a vehicle engine. The continuous ratings at base speed (1200 rpm) with different coolant temperatures are projected from test data at 900 rpm. A separate, comprehensive report on this thermal control study is available [1].

  3. Driving With Hemianopia: IV. Head Scanning and Detection at Intersections in a Simulator

    E-Print Network [OSTI]

    Peli, Eli

    Low Vision Driving With Hemianopia: IV. Head Scanning and Detection at Intersections in a Simulator AR, Ananyev E, Mandel AJ, Goldstein RB, Peli E. Driving with hemianopia: IV. Head scanning) on head scanning behaviors at intersections and evaluated the role of inadequate head scanning

  4. Control Realization for an Interior Permanent Magnet Synchronous Motor (IPMSM) in Automotive Drive Trains

    E-Print Network [OSTI]

    Noé, Reinhold

    Control Realization for an Interior Permanent Magnet Synchronous Motor (IPMSM) in Automotive Drive, the Maximal Torque Per Current (MTPC) method provides appropriate results. The requested torque is generated higher drive efficiency. The requested torque is generated with a minimum of total losses, which

  5. Neuro-Fuzzy Controller of a Sensorless PM Motor Drive For Washing Machines

    E-Print Network [OSTI]

    algorithms to enable direct drive from permanent magnet (PM) synchronous motors[3]. #12;Among AC drives, the permanent magnet (PM) motors have became popular, due to its high torque to current ration, large power of saving up to 60% of the energy being consumed by the older generation of appliances[1]. Two appliances

  6. Digital Architecture for Driving Large LED Arrays with Dynamic Bus Voltage Regulation and Phase Shifted PWM

    E-Print Network [OSTI]

    - This paper introduces a digital architecture suitable for driving a large number of High Brightness LightDigital Architecture for Driving Large LED Arrays with Dynamic Bus Voltage Regulation and Phase distinct performance advantage over conventional lighting technology. Higher optical efficiency, long

  7. PRESS-IN PILING: THE INSTALLATION OF INSTRUMENTED STEEL TUBULAR PILES WITH AND WITHOUT DRIVING SHOES

    E-Print Network [OSTI]

    Bolton, Malcolm

    PRESS-IN PILING: THE INSTALLATION OF INSTRUMENTED STEEL TUBULAR PILES WITH AND WITHOUT DRIVING carried out in Japan using the Press-in Method are presented. An instrumented double-skin tubular steel in shaft friction is examined. keywords: press-in method, tubular pile, instrumented, driving shoe, shaft

  8. Antisymmetric RMF Current Drive in FRCs R. D. Milroy,1,2

    E-Print Network [OSTI]

    Washington at Seattle, University of

    . Steinhauer1 A major concern for Rotating Magnetic Field (RMF) current drive of an FRC is that a transverse magnetic field tends to open the field lines, thus compromising confinement. In recent FRC current drive to an FRC. KEY WORDS: Field reversed configuration; rotating magnetic field. INTRODUCTION Rotating Magnetic

  9. [ ]February 2014 The original 1957 Gates pile driving formula is an empirically derived dynamic formula

    E-Print Network [OSTI]

    Harms, Kyle E.

    [ ]February 2014 PROBLEM The original 1957 Gates pile driving formula is an empirically derived dynamic formula that is used to predict pile capacity in the field during pile installation.The original Gates formula tends to over-predict pile capacity for low driving resistances and under-predict pile

  10. DIRECT-DRIVE AND EDDY-CURRENT SEPTUM MAGNETS June 29, 2001

    E-Print Network [OSTI]

    Kemner, Ken

    DIRECT-DRIVE AND EDDY-CURRENT SEPTUM MAGNETS S. H. Kim June 29, 2001 Abstract -- Two types of thin septum magnets, direct drive and eddy current, were compared mainly in 2-D magnetic aspects. For the eddy-current type, the leakage fields calculated using OPERA-2d were compared with the calculations

  11. Driving Directions to the UNCW Main Campus If traveling to Wilmington via I-40

    E-Print Network [OSTI]

    Olszewski Jr., Edward A.

    Driving Directions to the UNCW Main Campus If traveling to Wilmington via I-40 I-40 becomes NC 132 left into the Parking Deck. You will need to park on the main level in one of the designated visitor of Student Success (Room 1002) is in the lobby near the main building entrance. 2) From Reynolds Drive, turn

  12. Co-Simulation of an Electric Traction Drive Christoph Schulte and Joachim Bocker

    E-Print Network [OSTI]

    Noé, Reinhold

    ]. In order to maximize the quality of simulation results of an electrical drivetrain it is therefore) for an electric drive, where the control structure, power electronics and motor are modeled in different environ works as a combined system. The system model of the electric drive discussed in this work consists

  13. MEM 380/800 Mechatronics 2 Mechanisms and Algorithms Lab: Lego Ratchets, Drives and Gearing

    E-Print Network [OSTI]

    Oh, Paul

    MEM 380/800 ­ Mechatronics 2 ­ Mechanisms and Algorithms Lab: Lego Ratchets, Drives and Gearing #12;Lab Experiments 1. Introduction to Lego Gears (example connections) 2. Planetary Gears (outside and inside revolutions) 3. Bevel Gears 4. Worm Gears 5. Friction Drive 6. Rack-and-Pinion 7. Putting it all

  14. adopt our eco-driving top tips to reduce fuel costs

    E-Print Network [OSTI]

    Harman, Neal.A.

    adopt our eco-driving top tips to reduce fuel costs and accident risk Drive smoothly · Anticipate this will activate the fuel cut-off switch, reducing fuel flow to virtually zero. Shift up early · When accelerating, when appropriate. Avoid excessive speed High speeds greatly increase fuel consumption. Keep tyres

  15. BATTERY-POWERED, ELECTRIC-DRIVE VEHICLES PROVIDING BUFFER STORAGE FOR PV CAPACITY VALUE

    E-Print Network [OSTI]

    Perez, Richard R.

    BATTERY-POWERED, ELECTRIC-DRIVE VEHICLES PROVIDING BUFFER STORAGE FOR PV CAPACITY VALUE Steven applications, batteries can serve to provide firm peak-shaving for distributed PV installations. To date, however, the use of batteries from parked electric- drive vehicles (EDV) to provide buffer storage for PV

  16. SmartSaver: Turning Flash Drive into a Disk Energy Saver for Mobile Computers

    E-Print Network [OSTI]

    Chen, Feng

    SmartSaver: Turning Flash Drive into a Disk Energy Saver for Mobile Computers Feng Chen The Ohio amount of energy. Existing dynamic power management poli- cies usually take conservative approaches to save disk energy, and disk energy consumption remains a serious issue. Mean- while, the flash drive

  17. A New Driving Assistant for Automobiles Fred Yu, Bozena Kaminska and Pawel Gburzynski

    E-Print Network [OSTI]

    Gburzynski, Pawel

    by vehicle drivers, the two front corners result in the highest accident rates [4]. The entire system around the vehicle and stronger indication signals to drivers. The new driving assistant features simple of the vehicle. The existing driving-aid devices also utilize various types of indicators, ranging from beeping

  18. Electric vehicles: How much range is required for a day's driving? Nathaniel S. Pearre a,

    E-Print Network [OSTI]

    Firestone, Jeremy

    Electric vehicles: How much range is required for a day's driving? Nathaniel S. Pearre a, , Willett online xxxx Keywords: Electric vehicle Plug-in vehicle Daily driving range Range requirement Trip timing require- ments of electric vehicles (EVs). We conservatively assume that EV drivers would not change

  19. UBC Social Ecological Economic Development Studies (SEEDS) Student Report Elevator Drive Systems Energy Consumption Study Report

    E-Print Network [OSTI]

    Energy Consumption Study Report Benny ChunYin Chan University of British Columbia EECE 492 April 6th the current status of the subject matter of a project/report". #12;Elevator Drive Systems Energy Consumption Study Report April 2012 0 2012 Elevator Drive Systems Energy Consumption Study Report Benny CY Chan UBC

  20. "Knight Rider" in Graz: An autonomous car drives the guests of

    E-Print Network [OSTI]

    29.06.2009 Page 1 "Knight Rider" in Graz: An autonomous car drives the guests of honour of the RoboCup 2009 to the Stadthalle ­ without driver and without remote control Autonomous car drives State Minister to the robotics world championships Cult of the 1980s "Knight Rider" and "K.I.T.T", the intelligent, speaking car