Sample records for real-time storm tracking

  1. Handheld portable real-time tracking and communications device

    DOE Patents [OSTI]

    Wiseman, James M. (Albuquerque, NM); Riblett, Jr., Loren E. (Edgewood, NM); Green, Karl L. (Albuquerque, NM); Hunter, John A. (Albuquerque, NM); Cook, III, Robert N. (Rio Rancho, NM); Stevens, James R. (Arlington, VA)

    2012-05-22T23:59:59.000Z

    Portable handheld real-time tracking and communications devices include; a controller module, communications module including global positioning and mesh network radio module, data transfer and storage module, and a user interface module enclosed in a water-resistant enclosure. Real-time tracking and communications devices can be used by protective force, security and first responder personnel to provide situational awareness allowing for enhance coordination and effectiveness in rapid response situations. Such devices communicate to other authorized devices via mobile ad-hoc wireless networks, and do not require fixed infrastructure for their operation.

  2. Real time markerless motion tracking using linked kinematic chains

    DOE Patents [OSTI]

    Luck, Jason P. (Arvada, CO); Small, Daniel E. (Albuquerque, NM)

    2007-08-14T23:59:59.000Z

    A markerless method is described for tracking the motion of subjects in a three dimensional environment using a model based on linked kinematic chains. The invention is suitable for tracking robotic, animal or human subjects in real-time using a single computer with inexpensive video equipment, and does not require the use of markers or specialized clothing. A simple model of rigid linked segments is constructed of the subject and tracked using three dimensional volumetric data collected by a multiple camera video imaging system. A physics based method is then used to compute forces to align the model with subsequent volumetric data sets in real-time. The method is able to handle occlusion of segments and accommodates joint limits, velocity constraints, and collision constraints and provides for error recovery. The method further provides for elimination of singularities in Jacobian based calculations, which has been problematic in alternative methods.

  3. Tracking Living Cells as They Differentiate in Real Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron Spin Transition in2, 2003Tool ofTopo II:7.1 7.0CoupledTraceyTracking

  4. Tracking Living Cells as They Differentiate in Real Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron Spin Transition in2, 2003Tool ofTopo II:7.1Tracking Living Cells as They

  5. Tracking Living Cells as They Differentiate in Real Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron Spin Transition in2, 2003Tool ofTopo II:7.1Tracking Living Cells as

  6. Tracking Living Cells as They Differentiate in Real Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening a solidSynthesisAppliances » TopTours SignTracking Living Cells

  7. Tracking Living Cells as They Differentiate in Real Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening a solidSynthesisAppliances » TopTours SignTracking Living

  8. D. MITZEL ET AL.: REAL-TIME MULTI-PERSON TRACKING 1 Real-Time Multi-Person Tracking with

    E-Print Network [OSTI]

    urban environments using a camera setup mounted on a moving vehicle, e.g. an autonomous mobile robot. Recent years have seen considerable progress in this area, fueled by the development of advanced tracking to computational power and energy consumption are not yet satisfactory for use on autonomous platforms. Approaches

  9. Real-Time Load Elasticity Tracking and Pricing for Electric Vehicle Charging

    E-Print Network [OSTI]

    Giannakis, Georgios

    owners may also benefit from lower energy cost in the face of spiking gasoline prices. Although1 Real-Time Load Elasticity Tracking and Pricing for Electric Vehicle Charging Nasim Yahya Soltani price intelligently for individual customers to elicit desirable load curves. In this context

  10. A Moving Object Tracked by A Mobile Robot with Real-Time Obstacles Avoidance Capacity

    E-Print Network [OSTI]

    Abidi, Mongi A.

    . The robotic platform uses a visual camera to sense the movement of the desired object and a range sensor that assist a human driver for safety or comfort [6, 8]. NASA has applied this to help astronauts to carryA Moving Object Tracked by A Mobile Robot with Real-Time Obstacles Avoidance Capacity Chung

  11. Real-time storm surge prediction for bays on the Texas Gulf coast

    E-Print Network [OSTI]

    Kelley, Sean William

    1999-01-01T23:59:59.000Z

    storm Frances. The simulation data for hurricane Alicia compare very well to the actual measured total water level increase cause by the storm. The model results for hurricane Carla poorly represent the measured water level increases for stations located...

  12. REAL TIME HUMAN BODY TRACKING USING WAVENET Shu-Fai Wong and Kwan-Yee Kenneth Wong

    E-Print Network [OSTI]

    Wong, Kenneth K.Y.

    REAL TIME HUMAN BODY TRACKING USING WAVENET Shu-Fai Wong and Kwan-Yee Kenneth Wong Department- ing wavenet is proposed to track human body in real time without sacrificing accuracy. Human body of the searching window are es- timated using the proposed wavenet-based algorithm. The effectiveness

  13. Towards Real-Time Detection and Tracking of Blob-Filaments in Fusion Plasma Big Data

    E-Print Network [OSTI]

    Wu, Lingfei; Sim, Alex; Churchill, Michael; Choi, Jong Y; Stathopoulos, Andreas; Chang, Cs; Klasky, Scott

    2015-01-01T23:59:59.000Z

    Magnetic fusion could provide an inexhaustible, clean, and safe solution to the global energy needs. The success of magnetically-confined fusion reactors demands steady-state plasma confinement which is challenged by the blob-filaments driven by the edge turbulence. Real-time analysis can be used to monitor the progress of fusion experiments and prevent catastrophic events. However, terabytes of data are generated over short time periods in fusion experiments. Timely access to and analyzing this amount of data demands properly responding to extreme scale computing and big data challenges. In this paper, we apply outlier detection techniques to effectively tackle the fusion blob detection problem on extremely large parallel machines. We present a real-time region outlier detection algorithm to efficiently find blobs in fusion experiments and simulations. In addition, we propose an efficient scheme to track the movement of region outliers over time. We have implemented our algorithms with hybrid MPI/OpenMP and ...

  14. A Two-stage Kalman Filtering Approach for Robust and Real-time Power Systems State Tracking

    E-Print Network [OSTI]

    Welch, Greg

    A Two-stage Kalman Filtering Approach for Robust and Real-time Power Systems State Tracking Jinghe changes of system dynamics and erroneous PMU measurements. Index Terms--Power systems, real-time state- tics of loads and control devices are not included in operational models. This assumption reduces

  15. Gains From Real-Time Tracking of Prostate Motion During External Beam Radiation Therapy

    SciTech Connect (OSTI)

    Li Jinsheng, E-mail: jinsheng.li@fccc.ed [Department of Radiation Oncology, Fox Chase Cancer Center, Philadelphia, Pennsylvania (United States); Jin Lihui; Pollack, Alan; Horwitz, Eric M.; Buyyounouski, Mark K.; Price, Robert A.; Ma Changming [Department of Radiation Oncology, Fox Chase Cancer Center, Philadelphia, Pennsylvania (United States)

    2009-12-01T23:59:59.000Z

    Purpose: To study the gains from real-time tracking of prostate motion and threshold-based intervention and the feasibility of margin reduction for external beam radiation therapy of prostate cancer. Methods and Materials: Prostate intrafractional motion data from 775 randomly selected treatment fractions (105 prostate patients) were analyzed. Statistical distributions of prostate intrafractional displacement from baseline were used for treatment margin calculation together with other geometrical uncertainties for all patients and a subset of 7 patient who exhibited the largest intrafractional motion. Compared with treatment without any intrafractional intervention, potential reductions in treatment margins were evaluated for treatments with 5-mm and 3-mm threshold-based intervention and four-dimensional (4D) treatments with and without prostate rotation correction. Results: The percentage of time of prostate displacement from the baseline by 3 mm and 5 mm in any direction was 13.4% and 1.8%, respectively, for the general patient population. The ratios were 41% and 15% for the 7 selected patients. Reductions in the posterior margin were 0.2, 0.5, 1.3, and 3.1 mm from the original 7.7 mm, respectively, for 5-mm and 3-mm threshold-based treatments and 4D treatments with and without prostate rotation correction for all patients. They were 1.3, 1.9, 3.1 and 4.9 mm from the original 9.5 mm, corresponding to the 7 selected patients. The treatment margin reductions in other directions were even smaller. Conclusions: Real-time motion tracking and threshold-based intrafractional intervention may play a significant roll in treatment margin reduction for a small fraction of patients but not for the general patient population. Four-dimensional treatments with prostate rotation correction can reduce the treatment margin more significantly.

  16. Respiratory-Induced Prostate Motion Using Wavelet Decomposition of the Real-Time Electromagnetic Tracking Signal

    SciTech Connect (OSTI)

    Lin, Yuting [Tu and Yuen Center for Functional Onco-Imaging, Department of Radiological Sciences, University of California, Irvine, California (United States); Liu, Tian; Yang, Xiaofeng [Department of Radiation Oncology, Emory University Hospital, Winship Cancer Institute, Atlanta, Georgia (United States); Wang, Yuenan [Center for Devices and Radiological Health, US Food and Drug Administration, Silver Spring, Maryland (United States); Khan, Mohammad K., E-mail: drkhurram2000@gmail.com [Department of Radiation Oncology, Emory University Hospital, Winship Cancer Institute, Atlanta, Georgia (United States)

    2013-10-01T23:59:59.000Z

    Purpose: The objective of this work is to characterize and quantify the impact of respiratory-induced prostate motion. Methods and Materials: Real-time intrafraction motion is observed with the Calypso 4-dimensional nonradioactive electromagnetic tracking system (Calypso Medical Technologies, Inc. Seattle, Washington). We report the results from a total of 1024 fractions from 31 prostate cancer patients. Wavelet transform was used to decompose the signal to extract and isolate the respiratory-induced prostate motion from the total prostate displacement. Results: Our results show that the average respiratory motion larger than 0.5 mm can be observed in 68% of the fractions. Fewer than 1% of the patients showed average respiratory motion of less than 0.2 mm, whereas 99% of the patients showed average respiratory-induced motion ranging between 0.2 and 2 mm. The maximum respiratory range of motion of 3 mm or greater was seen in only 25% of the fractions. In addition, about 2% patients showed anxiety, indicated by a breathing frequency above 24 times per minute. Conclusions: Prostate motion is influenced by respiration in most fractions. Real-time intrafraction data are sensitive enough to measure the impact of respiration by use of wavelet decomposition methods. Although the average respiratory amplitude observed in this study is small, this technique provides a tool that can be useful if one moves to smaller treatment margins (?5 mm). This also opens ups the possibility of being able to develop patient specific margins, knowing that prostate motion is not unpredictable.

  17. RAO-BLACKWELLIZED RESAMPLING PARTICLE FILTER FOR REAL-TIME PLAYER TRACKING IN SPORTS

    E-Print Network [OSTI]

    Cremers, Daniel

    . Hoyningen-Huene, Michael Beetz Intelligent Autonomous Systems Group, Technische Universitat Munchen, Boltzmannstr. 3, D-85748 Garching, Germany hoyninge, beetz@cs.tum.edu Keywords: Multi-target tracking, Particle

  18. Effect of Body Mass Index on Intrafraction Prostate Displacement Monitored by Real-Time Electromagnetic Tracking

    SciTech Connect (OSTI)

    Butler, Wayne M., E-mail: wbutler@wheelinghospital.org [Schiffler Cancer Center, Wheeling Hospital, Wheeling, West Virginia (United States); Wheeling Jesuit University, Wheeling, West Virginia (United States); Morris, Mallory N. [Schiffler Cancer Center, Wheeling Hospital, Wheeling, West Virginia (United States)] [Schiffler Cancer Center, Wheeling Hospital, Wheeling, West Virginia (United States); Merrick, Gregory S. [Schiffler Cancer Center, Wheeling Hospital, Wheeling, West Virginia (United States) [Schiffler Cancer Center, Wheeling Hospital, Wheeling, West Virginia (United States); Wheeling Jesuit University, Wheeling, West Virginia (United States); Kurko, Brian S.; Murray, Brian C. [Schiffler Cancer Center, Wheeling Hospital, Wheeling, West Virginia (United States)] [Schiffler Cancer Center, Wheeling Hospital, Wheeling, West Virginia (United States)

    2012-10-01T23:59:59.000Z

    Purpose: To evaluate, using real-time monitoring of implanted radiofrequency transponders, the intrafraction prostate displacement of patients as a function of body mass index (BMI). Methods and Materials: The motions of Beacon radiofrequency transponders (Calypso Medical Technologies, Seattle, WA) implanted in the prostate glands of 66 men were monitored throughout the course of intensity modulated radiation therapy. Data were acquired at 10 Hz from setup to the end of treatment, but only the 1.7 million data points with a 'beam on' tag were used in the analysis. There were 21 obese patients, with BMI {>=}30 and 45 nonobese patients in the study. Results: Mean displacements were least in the left-right lateral direction (0.56 {+-} 0.24 mm) and approximately twice that magnitude in the superior-inferior and anterior-posterior directions. The net vector displacement was larger still, 1.95 {+-} 0.47 mm. Stratified by BMI cohort, the mean displacements per patient in the 3 Cartesian axes as well as the net vector for patients with BMI {>=}30 were slightly less (<0.2 mm) but not significantly different than the corresponding values for patients with lower BMIs. As a surrogate for the magnitude of oscillatory noise, the standard deviation for displacements in all measured planes showed no significant differences in the prostate positional variability between the lower and higher BMI groups. Histograms of prostate displacements showed a lower frequency of large displacements in obese patients, and there were no significant differences in short-term and long-term velocity distributions. Conclusions: After patients were positioned accurately using implanted radiofrequency transponders, the intrafractional displacements in the lateral, superior-inferior, and anterior-posterior directions as well as the net vector displacements were smaller, but not significantly so, for obese men than for those with lower BMI.

  19. A real-time algorithm for the harmonic estimation and frequency tracking of dominant components in fusion plasma magnetic diagnostics

    SciTech Connect (OSTI)

    Alves, D.; Coelho, R. [Associao Euratom/IST, Instituto de Plasmas e Fuso Nuclear, Instituto Superior Tcnico, Universidade Tcnica de Lisboa, 1049-001 Lisboa (Portugal)] [Associao Euratom/IST, Instituto de Plasmas e Fuso Nuclear, Instituto Superior Tcnico, Universidade Tcnica de Lisboa, 1049-001 Lisboa (Portugal); Collaboration: JET-EFDA Contributors

    2013-08-15T23:59:59.000Z

    The real-time tracking of instantaneous quantities such as frequency, amplitude, and phase of components immerse in noisy signals has been a common problem in many scientific and engineering fields such as power systems and delivery, telecommunications, and acoustics for the past decades. In magnetically confined fusion research, extracting this sort of information from magnetic signals can be of valuable assistance in, for instance, feedback control of detrimental magnetohydrodynamic modes and disruption avoidance mechanisms by monitoring instability growth or anticipating mode-locking events. This work is focused on nonlinear Kalman filter based methods for tackling this problem. Similar methods have already proven their merits and have been successfully employed in this scientific domain in applications such as amplitude demodulation for the motional Stark effect diagnostic. In the course of this work, three approaches are described, compared, and discussed using magnetic signals from the Joint European Torus tokamak plasma discharges for benchmarking purposes.

  20. Greenland's Pressure Drag and the Atlantic Storm Track THOMAS JUNG

    E-Print Network [OSTI]

    Greenland's Pressure Drag and the Atlantic Storm Track THOMAS JUNG European Centre for Medium of Greenland on the Northern Hemisphere wintertime circulation are discussed. Inviscid pressure drag on Greenland's slopes, calculated from reanalysis data, is related to circulation patterns. Greenland lies

  1. The JET Alfvn Eigenmode Local Manager for the real-time detection and tracking of a frequency-degenerate spectrum of MHD instabilities

    E-Print Network [OSTI]

    Lenstra, Arjen K.

    1 The JET Alfvn Eigenmode Local Manager for the real-time detection and tracking of a frequency,5 , A.Klein6 , P.Lavanchy1 , T.Panis1 , and JET-EFDA contributors JET-EFDA, Culham Science Centre, OX14, FR [3] Culham Centre for Fusion Energy, Culham Science Centre, Abingdon, UK [4] formerly: JET Joint

  2. 2 1 APPLICATION GALLERY 1.1 Tracking ``Fuzzy'' Storms in Doppler Radar Images

    E-Print Network [OSTI]

    Barron, John

    and tornadoes. The Doppler radar generates intensity and radial velocity images, examples of which are shown Doppler radar radial and velocity image (a) (b) (c) (d) Figure 1.2: The storm tracks for the (a) 5 th , (b2 1 APPLICATION GALLERY 1.1 Tracking ``Fuzzy'' Storms in Doppler Radar Images J. L. Barron 1 , R. E

  3. PWP3D: Real-time Segmentation and Tracking of 3D Objects Victor A. Prisacariu Ian D. Reid

    E-Print Network [OSTI]

    Oxford, University of

    the discrimination between statistical foreground and background appearance models, via direct optimisation of the 3D segmentation and 2D to 3D pose tracking, using a known 3D model. Given such a model, we aim to maximise embedding function, and we define an energy over this region and its immediate background surroundings based

  4. Seasonal variation of upper-level mobile trough development upstream of the Pacific storm track

    E-Print Network [OSTI]

    Myoung, Boksoon

    2002-01-01T23:59:59.000Z

    The purpose of this thesis is to investigate seasonal and interannual statistics of troughs associated with the Pacific storm track and quantify the influence of deformation on trough development upstream of the western Pacific. The goal...

  5. Seasonal variation of upper-level mobile trough development upstream of the Pacific storm track

    E-Print Network [OSTI]

    Myoung, Boksoon

    2002-01-01T23:59:59.000Z

    The purpose of this thesis is to investigate seasonal and interannual statistics of troughs associated with the Pacific storm track and quantify the influence of deformation on trough development upstream of the western Pacific. The goal...

  6. Real time automated inspection

    DOE Patents [OSTI]

    Fant, K.M.; Fundakowski, R.A.; Levitt, T.S.; Overland, J.E.; Suresh, B.R.; Ulrich, F.W.

    1985-05-21T23:59:59.000Z

    A method and apparatus are described relating to the real time automatic detection and classification of characteristic type surface imperfections occurring on the surfaces of material of interest such as moving hot metal slabs produced by a continuous steel caster. A data camera transversely scans continuous lines of such a surface to sense light intensities of scanned pixels and generates corresponding voltage values. The voltage values are converted to corresponding digital values to form a digital image of the surface which is subsequently processed to form an edge-enhanced image having scan lines characterized by intervals corresponding to the edges of the image. The edge-enhanced image is thresholded to segment out the edges and objects formed by the edges by interval matching and bin tracking. Features of the objects are derived and such features are utilized to classify the objects into characteristic type surface imperfections. 43 figs.

  7. Real time automated inspection

    DOE Patents [OSTI]

    Fant, Karl M. (Minneapolis, MN); Fundakowski, Richard A. (Saint Paul, MN); Levitt, Tod S. (Minneapolis, MN); Overland, John E. (Plymouth, MN); Suresh, Bindinganavle R. (New Brighton, MN); Ulrich, Franz W. (Minneapolis, MN)

    1985-01-01T23:59:59.000Z

    A method and apparatus relating to the real time automatic detection and classification of characteristic type surface imperfections occurring on the surfaces of material of interest such as moving hot metal slabs produced by a continuous steel caster. A data camera transversely scans continuous lines of such a surface to sense light intensities of scanned pixels and generates corresponding voltage values. The voltage values are converted to corresponding digital values to form a digital image of the surface which is subsequently processed to form an edge-enhanced image having scan lines characterized by intervals corresponding to the edges of the image. The edge-enhanced image is thresholded to segment out the edges and objects formed by the edges are segmented out by interval matching and bin tracking. Features of the objects are derived and such features are utilized to classify the objects into characteristic type surface imperfections.

  8. The Prediction of Extratropical Storm Tracks by the ECMWF and NCEP Ensemble Prediction Systems

    E-Print Network [OSTI]

    Begstsson, Lennart

    The Prediction of Extratropical Storm Tracks by the ECMWF and NCEP Ensemble Prediction Systems Author: Email: lsrf@mail.nerc-essc.ac.uk #12;Abstract The prediction of extratropical cyclones Prediction (NCEP) Ensemble Prediction Systems (EPS) has been investigated using an objective feature tracking

  9. Systematic Security and Timeliness Tradeoffs in Real-Time Embedded Systems Kyoung-Don Kang

    E-Print Network [OSTI]

    Kang, Kyoung-Don

    security requirements in soft real-time applications such as battlefield monitoring and target track- ing

  10. Moist synoptic transport of CO2 along the midlatitude storm track

    E-Print Network [OSTI]

    Collett Jr., Jeffrey L.

    into the polar vortex, while cold dry air, low in CO2, that had been transported into the polar vortex earlier by equatorward transport by sinking cold dry air following a "dry air intrusion (DI)" behind cold fronts [CooperMoist synoptic transport of CO2 along the midlatitude storm track N. C. Parazoo,1 A. S. Denning,1 J

  11. The Prediction of Extratropical Storm Tracks by the ECMWF and NCEP Ensemble Prediction Systems

    E-Print Network [OSTI]

    Froude, Lizzie

    The Prediction of Extratropical Storm Tracks by the ECMWF and NCEP Ensemble Prediction Systems 2006) ABSTRACT The prediction of extratropical cyclones by the European Centre for Medium-Range Weather Forecasts (ECMWF) and the National Centers for Environmental Prediction (NCEP) ensemble prediction systems

  12. Real-time Vehicle Reidentification System for Freeway Performance Measurements

    E-Print Network [OSTI]

    Jeng, Shin-Ting

    2007-01-01T23:59:59.000Z

    Tok, A. (2005). Anonymous Vehicle Tracking for Real-timeField Investigation of Advanced Vehicle Reidentificationvariance, land changing, and vehicle heterogeneity. In:

  13. Assessing the Effects of Anthropogenic Aerosols on Pacific Storm Track Using a Multiscale Global Climate Model

    SciTech Connect (OSTI)

    Wang, Yuan; Wang, Minghuai; Zhang, Renyi; Ghan, Steven J.; Lin, Yun; Hu, Jiaxi; Pan, Bowen; Levy, Misti; Jiang, Jonathan; Molina, Mario J.

    2014-05-13T23:59:59.000Z

    Atmospheric aerosols impact weather and global general circulation by modifying cloud and precipitation processes, but the magnitude of cloud adjustment by aerosols remains poorly quantified and represents the largest uncertainty in estimated forcing of climate change. Here we assess the impacts of anthropogenic aerosols on the Pacific storm track using a multi-scale global aerosol-climate model (GCM). Simulations of two aerosol scenarios corresponding to the present day and pre-industrial conditions reveal long-range transport of anthropogenic aerosols across the north Pacific and large resulting changes in the aerosol optical depth, cloud droplet number concentration, and cloud and ice water paths. Shortwave and longwave cloud radiative forcing at the top of atmosphere are changed by - 2.5 and + 1.3 W m-2, respectively, by emission changes from pre-industrial to present day, and an increased cloud-top height indicates invigorated mid-latitude cyclones. The overall increased precipitation and poleward heat transport reflect intensification of the Pacific storm track by anthropogenic aerosols. Hence, this work provides for the first time a global perspective of the impacts of Asian pollution outflows from GCMs. Furthermore, our results suggest that the multi-scale modeling framework is essential in producing the aerosol invigoration effect of deep convective clouds on the global scale.

  14. Impact of rising greenhouse gases on mid-latitude storm tracks and associated hydroclimate variability and change

    SciTech Connect (OSTI)

    Seager, Richard

    2014-12-08T23:59:59.000Z

    Project Summary This project aimed to advance physical understanding of how and why the mid-latitude jet streams and storm tracks shift in intensity and latitude in response to changes in radiative forcing with an especial focus on rising greenhouse gases. The motivation, and much of the work, stemmed from the importance that these mean and transient atmospheric circulation systems have for hydroclimate. In particular drying and expansion of the subtropical dry zones has been related to a poleward shift of the mid-latitude jets and storm tracks. The work involved integrated assessment of observation and model projections as well as targeted model simulations.

  15. CARSystem: a distributed algorithm for efficient real-time vehicular traffic control

    E-Print Network [OSTI]

    Koothrappally, Joseph

    1997-01-01T23:59:59.000Z

    transfer between individual traffic control processes. Real-time information -obtained by tracking the density profiles that constitute demand at each intersection in real-time-is used by an on-line optimization algorithm to provide real-time adaptive...

  16. Solar Real-Time Pricing: Is Real-Time Electricity Pricing Beneficial...

    Energy Savers [EERE]

    Information Resources Solar Real-Time Pricing: Is Real-Time Electricity Pricing Beneficial to Solar PV in New York City? Solar Real-Time Pricing: Is Real-Time Electricity...

  17. Toward natural interaction in the real world: real-time gesture recognition

    E-Print Network [OSTI]

    Yin, Ying

    Using a new hand tracking technology capable of tracking 3D hand postures in real-time, we developed a recognition system for continuous natural gestures. By natural gestures, we mean those encountered in spontaneous ...

  18. Real time infrared aerosol analyzer

    DOE Patents [OSTI]

    Johnson, Stanley A. (Countryside, IL); Reedy, Gerald T. (Bourbonnais, IL); Kumar, Romesh (Naperville, IL)

    1990-01-01T23:59:59.000Z

    Apparatus for analyzing aerosols in essentially real time includes a virtual impactor which separates coarse particles from fine and ultrafine particles in an aerosol sample. The coarse and ultrafine particles are captured in PTFE filters, and the fine particles impact onto an internal light reflection element. The composition and quantity of the particles on the PTFE filter and on the internal reflection element are measured by alternately passing infrared light through the filter and the internal light reflection element, and analyzing the light through infrared spectrophotometry to identify the particles in the sample.

  19. Arnold Schwarzenegger REAL-TIME GRID RELIABILITY

    E-Print Network [OSTI]

    Energy Research (PIER) California Energy Commission Beth Chambers Contract Manager Jamie Patterson (VSA) prototype to monitor system voltage conditions and provide real time dispatchers with reliabilityArnold Schwarzenegger Governor REAL-TIME GRID RELIABILITY MANAGEMENT California ISO Real

  20. Real-Time PCR Dean Fraga,1

    E-Print Network [OSTI]

    Jones, Michelle

    , Wooster, Ohio 2 Ohio Agricultural Research and Development Center, Wooster, Ohio 3 Ashland University, Ashland, Ohio OVERVIEW AND PRINCIPLES The real-time polymerase chain reaction (real-time PCR) is a recent

  1. Convex Optimization: from Real-Time Embedded

    E-Print Network [OSTI]

    Hall, Julian

    Convex Optimization: from Real-Time Embedded to Large-Scale Distributed Stephen Boyd Neal Parikh of Edinburgh, June 25 2014 1 #12;Outline Convex Optimization Real-Time Embedded Optimization Large-Scale Distributed Optimization Summary 2 #12;Outline Convex Optimization Real-Time Embedded Optimization Large

  2. Real Time Grid Reliability Management 2005

    E-Print Network [OSTI]

    Eto, Joe

    2008-01-01T23:59:59.000Z

    Energy Management System (SCADA/EMS). In the long term, theadvanced real time control. SCADA is a category of softwareequipment and conditions. SCADA systems include hardware and

  3. Near Real-Time Push Middleware

    E-Print Network [OSTI]

    Mal, Siddhartha Byron

    2012-01-01T23:59:59.000Z

    Integration of Near Real-Time Push Middleware o Performance characterization and comparison with TuVista DOE/LADWP Smart Grid

  4. Real-time network simulation support for

    E-Print Network [OSTI]

    Liu, Xiaowen "Jason"

    Real-time network simulation support for scalable routing experiments Yue Li*, Jason Liu, and Raju-time network simulation with the realism of open- source routing protocol implementations. The infrastructure experiments on light-weight virtual machines. Keywords: network simulation; real-time simulation; network

  5. Real Time Search User Behavior Real time search is an increasingly important area of

    E-Print Network [OSTI]

    Jansen, James

    . The most frequently used terms accounted for only 0.03% of the total terms. Concerning search topics Web search. Searchers of real time content often repeat queries overtime, perhaps indicating long term content increasingly enters the main stream. Keywords Real time search, real time content, Collecta

  6. Real time sensor for therapeutic radiation delivery

    DOE Patents [OSTI]

    Bliss, Mary (West Richland, WA); Craig, Richard A. (West Richland, WA); Reeder, Paul L. (Richland, WA)

    1998-01-01T23:59:59.000Z

    The invention is a real time sensor for therapeutic radiation. A probe is placed in or near the patient that senses in real time the dose at the location of the probe. The strength of the dose is determined by either an insertion or an exit probe. The location is determined by a series of vertical and horizontal sensing elements that gives the operator a real time read out dose location relative to placement of the patient. The increased accuracy prevents serious tissue damage to the patient by preventing overdose or delivery of a dose to a wrong location within the body.

  7. Real time sensor for therapeutic radiation delivery

    DOE Patents [OSTI]

    Bliss, M.; Craig, R.A.; Reeder, P.L.

    1998-01-06T23:59:59.000Z

    The invention is a real time sensor for therapeutic radiation. A probe is placed in or near the patient that senses in real time the dose at the location of the probe. The strength of the dose is determined by either an insertion or an exit probe. The location is determined by a series of vertical and horizontal sensing elements that gives the operator a real time read out dose location relative to placement of the patient. The increased accuracy prevents serious tissue damage to the patient by preventing overdose or delivery of a dose to a wrong location within the body. 14 figs.

  8. Real time PCR measurement by fluorescence anisotropy

    E-Print Network [OSTI]

    Crane, Bryan Lee, 1976-

    2005-01-01T23:59:59.000Z

    Real-time polymerase chain reaction (PCR) is the gold-standard for quantitation in both mutation and gene expression analyses. Already this technique has found valuable clinical application in disease diagnosis and progression ...

  9. Real-time control over networks

    E-Print Network [OSTI]

    Ji, Kun

    2007-09-17T23:59:59.000Z

    researchers to develop NCSs to implement distributed control schemes. This dissertation presents a framework for the modeling, design, stability analysis, control, and bandwidth allocation of real-time control over networks. This framework covers key research...

  10. Real Time Grid Reliability Management 2005

    E-Print Network [OSTI]

    Eto, Joe

    2008-01-01T23:59:59.000Z

    SCE, W APA, PG&E Data PDC PI Interface frequency dataIntegration of CA ISO PDC with Arbiters California Real-TimePhasor Data Concentrator (PDC) receives data from PMUs in

  11. PRISACARIU, REID: PWP3D 1 PWP3D: Real-time segmentation and

    E-Print Network [OSTI]

    Oxford, University of

    method allows for fast 2D3D pose tracking and 2D segmentation using a single, unified, energy function in print or electronic forms. #12;2 PRISACARIU, REID: PWP3D The most closely related work to our ownPRISACARIU, REID: PWP3D 1 PWP3D: Real-time segmentation and tracking of 3D objects Victor A

  12. REAL TIME SYSTEM OPERATIONS 2006-2007

    SciTech Connect (OSTI)

    Eto, Joseph H.; Parashar, Manu; Lewis, Nancy Jo

    2008-08-15T23:59:59.000Z

    The Real Time System Operations (RTSO) 2006-2007 project focused on two parallel technical tasks: (1) Real-Time Applications of Phasors for Monitoring, Alarming and Control; and (2) Real-Time Voltage Security Assessment (RTVSA) Prototype Tool. The overall goal of the phasor applications project was to accelerate adoption and foster greater use of new, more accurate, time-synchronized phasor measurements by conducting research and prototyping applications on California ISO's phasor platform - Real-Time Dynamics Monitoring System (RTDMS) -- that provide previously unavailable information on the dynamic stability of the grid. Feasibility assessment studies were conducted on potential application of this technology for small-signal stability monitoring, validating/improving existing stability nomograms, conducting frequency response analysis, and obtaining real-time sensitivity information on key metrics to assess grid stress. Based on study findings, prototype applications for real-time visualization and alarming, small-signal stability monitoring, measurement based sensitivity analysis and frequency response assessment were developed, factory- and field-tested at the California ISO and at BPA. The goal of the RTVSA project was to provide California ISO with a prototype voltage security assessment tool that runs in real time within California ISO?s new reliability and congestion management system. CERTS conducted a technical assessment of appropriate algorithms, developed a prototype incorporating state-of-art algorithms (such as the continuation power flow, direct method, boundary orbiting method, and hyperplanes) into a framework most suitable for an operations environment. Based on study findings, a functional specification was prepared, which the California ISO has since used to procure a production-quality tool that is now a part of a suite of advanced computational tools that is used by California ISO for reliability and congestion management.

  13. Continuous, real time microwave plasma element sensor

    DOE Patents [OSTI]

    Woskov, Paul P. (4 Ledgewood Dr., Bedford, MA 01730); Smatlak, Donna L. (10 Village Hill Rd., Belmont, MA 02178); Cohn, Daniel R. (26 Walnut Hill Rd., Chestnut Hill, MA 02167); Wittle, J. Kenneth (1740 Conestoga Rd., Chester Springs, PA 19425); Titus, Charles H. (323 Echo Valley La., Newton Square, PA 19072); Surma, Jeffrey E. (806 Brian La., Kennewick, WA 99337)

    1995-01-01T23:59:59.000Z

    Microwave-induced plasma for continuous, real time trace element monitoring under harsh and variable conditions. The sensor includes a source of high power microwave energy and a shorted waveguide made of a microwave conductive, refractory material communicating with the source of the microwave energy to generate a plasma. The high power waveguide is constructed to be robust in a hot, hostile environment. It includes an aperture for the passage of gases to be analyzed and a spectrometer is connected to receive light from the plasma. Provision is made for real time in situ calibration. The spectrometer disperses the light, which is then analyzed by a computer. The sensor is capable of making continuous, real time quantitative measurements of desired elements, such as the heavy metals lead and mercury.

  14. Continuous, real time microwave plasma element sensor

    DOE Patents [OSTI]

    Woskov, P.P.; Smatlak, D.L.; Cohn, D.R.; Wittle, J.K.; Titus, C.H.; Surma, J.E.

    1995-12-26T23:59:59.000Z

    Microwave-induced plasma is described for continuous, real time trace element monitoring under harsh and variable conditions. The sensor includes a source of high power microwave energy and a shorted waveguide made of a microwave conductive, refractory material communicating with the source of the microwave energy to generate a plasma. The high power waveguide is constructed to be robust in a hot, hostile environment. It includes an aperture for the passage of gases to be analyzed and a spectrometer is connected to receive light from the plasma. Provision is made for real time in situ calibration. The spectrometer disperses the light, which is then analyzed by a computer. The sensor is capable of making continuous, real time quantitative measurements of desired elements, such as the heavy metals lead and mercury. 3 figs.

  15. Getting Useful Real-Time Feedback About Your Program | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Getting Useful Real-Time Feedback About Your Program Getting Useful Real-Time Feedback About Your Program Better Buildings Webinar - May 25, 2011 20110525realtimefeedback.pdf...

  16. Wireless technology collects real-time information from oil and...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Wireless technology collects real-time information from oil and gas wells Wireless technology collects real-time information from oil and gas wells The patented system delivers...

  17. Real Time Grid Reliability Management 2005

    SciTech Connect (OSTI)

    Eto, Joe; Eto, Joe; Lesieutre, Bernard; Lewis, Nancy Jo; Parashar, Manu

    2008-07-07T23:59:59.000Z

    The increased need to manage California?s electricity grid in real time is a result of the ongoing transition from a system operated by vertically-integrated utilities serving native loads to one operated by an independent system operator supporting competitive energy markets. During this transition period, the traditional approach to reliability management -- construction of new transmission lines -- has not been pursued due to unresolved issues related to the financing and recovery of transmission project costs. In the absence of investments in new transmission infrastructure, the best strategy for managing reliability is to equip system operators with better real-time information about actual operating margins so that they can better understand and manage the risk of operating closer to the edge. A companion strategy is to address known deficiencies in offline modeling tools that are needed to ground the use of improved real-time tools. This project: (1) developed and conducted first-ever demonstrations of two prototype real-time software tools for voltage security assessment and phasor monitoring; and (2) prepared a scoping study on improving load and generator response models. Additional funding through two separate subsequent work authorizations has already been provided to build upon the work initiated in this project.

  18. Introducing Real-time Interactions Neil Henderson

    E-Print Network [OSTI]

    Newcastle upon Tyne, University of

    This report forms the deliverable for Activity I.35 which was to create a formal model to show University of Newcastle, Newcastle upon Tyne, NE1 7RU, UK. Abstract This report introduces a new rigorous notation called Real-time Interactions that can be used to model the interactions between a system and its

  19. Approaching Real-time Network Traffic Classification

    E-Print Network [OSTI]

    Haddadi, Hamed

    and studies. It serves as the input for Intrusion Detection Systems, provides Class-of-Service (CoS) mapping22 Approaching Real-time Network Traffic Classification ISSN 1470-5559 RR-06-12 October 2006-time Network Traffic Classification Wei Li, Kaysar Abdin, Robert Dann and Andrew Moore Department of Computer

  20. Visualizations for Real-time Pricing Demonstration

    SciTech Connect (OSTI)

    Marinovici, Maria C.; Hammerstrom, Janelle L.; Widergren, Steven E.; Dayley, Greg K.

    2014-10-13T23:59:59.000Z

    In this paper, the visualization tools created for monitoring the operations of a real-time pricing demonstration system that runs at a distribution feeder level are presented. The information these tools provide gives insights into demand behavior from automated price responsive devices, distribution feeder characteristics, impact of weather on systems development, and other significant dynamics. Given the large number of devices that bid into a feeder-level real-time electricity market, new techniques are explored to summarize the present state of the system and contrast that with previous trends as well as future projections. To better understand the system behavior and correctly inform decision-making procedures, effective visualization of the data is imperative.

  1. Real time gamma-ray signature identifier

    DOE Patents [OSTI]

    Rowland, Mark (Alamo, CA); Gosnell, Tom B. (Moraga, CA); Ham, Cheryl (Livermore, CA); Perkins, Dwight (Livermore, CA); Wong, James (Dublin, CA)

    2012-05-15T23:59:59.000Z

    A real time gamma-ray signature/source identification method and system using principal components analysis (PCA) for transforming and substantially reducing one or more comprehensive spectral libraries of nuclear materials types and configurations into a corresponding concise representation/signature(s) representing and indexing each individual predetermined spectrum in principal component (PC) space, wherein an unknown gamma-ray signature may be compared against the representative signature to find a match or at least characterize the unknown signature from among all the entries in the library with a single regression or simple projection into the PC space, so as to substantially reduce processing time and computing resources and enable real-time characterization and/or identification.

  2. Real Time Monitoring: Achieving Energy Efficiency

    E-Print Network [OSTI]

    Rouse, S.

    2009-01-01T23:59:59.000Z

    ABSTRACT: IECBO?s International Conference for Enhanced Building Operations November 17-18, 2009 Austin, Texas. Energy @ Work www.Energy-Efficiency.com File: Rouse_ Abstract Contact: scott.rouse@energy-efficiency....com, (416) 402-0525 Proposal Type: o Electronic proposal for presentation Title of Paper: o Real Time Monitoring: Achieving Energy Efficiency! Conference: o ICEBO?s International Conference for Enhanced Building Operations Submitted by: o...

  3. Real Time Monitoring: Achieving Energy Efficiency

    E-Print Network [OSTI]

    Rouse, S.

    ABSTRACT: IECBO?s International Conference for Enhanced Building Operations November 17-18, 2009 Austin, Texas. Energy @ Work www.Energy-Efficiency.com File: Rouse_ Abstract Contact: scott.rouse@energy-efficiency....com, (416) 402-0525 Proposal Type: o Electronic proposal for presentation Title of Paper: o Real Time Monitoring: Achieving Energy Efficiency! Conference: o ICEBO?s International Conference for Enhanced Building Operations Submitted by: o...

  4. Real-Time Demand Side Energy Management

    E-Print Network [OSTI]

    Victor, A.; Brodkorb, M.

    2006-01-01T23:59:59.000Z

    Real-Time Demand Side Energy Management Annelize Victor Michael Brodkorb Sr. Business Consultant Business Development Manager Aspen Technology, Inc. Aspen Technology Espaa, S.A. Houston, TX Barcelona, Spain ABSTRACT To remain... competitive, manufacturers must capture opportunities to increase bottom-line profitability. The goal of this paper is to present a new methodology for reducing energy costs Demand-Side Energy Management. Learn how process manufacturers assess energy...

  5. Reliable Downlink Scheduling for Wireless Networks with Real-Time and Non-Real Time Clients

    E-Print Network [OSTI]

    Jain, Abhishek

    2014-08-05T23:59:59.000Z

    reliability to the real time clients, while Round Robin policy provides reliability to the clients but fails to achieve high system throughput in a time-varying wireless network. Apart from these policies, there are scheduling policies which prioritize clients...

  6. Real-time video tracking using PTZ cameras Sangkyu Kanga

    E-Print Network [OSTI]

    Abidi, Mongi A.

    . This experiment shows that the proposed system can be used to monitor moving targets in widely open areas

  7. Real-time Collaborative Tracking for Underwater Networked Systems

    E-Print Network [OSTI]

    Kastner, Ryan

    technique can strategically trade off localization accuracy and energy consumption, achieving more than 50. INTRODUCTION There has been a growing interest in operating groups of autonomous underwater vehicles information is needed for con- trol and navigation of underwater vehicles, in early warning systems

  8. Tracking Living Cells as They Differentiate in Real Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    these projects will target Alzheimer's disease, macular degeneration of the retina in diabetes, and mitochondrial diseases in children. In addition, specific processes like protein...

  9. Tracking Living Cells as They Differentiate in Real Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron Spin Transition in2, 2003Tool ofTopo II:7.1

  10. Baton Rouge Complex Steam Real Time Optimization

    E-Print Network [OSTI]

    Iyun, T.

    2014-01-01T23:59:59.000Z

    Baton Rouge Complex Steam Real Time Optimization IETC 2014 New Orleans, Louisiana Tope Iyun ExxonMobil Chemical Company May 22, 2014 ESL-IE-14-05-32 Proceedings of the Thrity-Sixth Industrial Energy Technology Conference New Orleans, LA. May 20... were generated by or on behalf of ExxonMobil Chemical Company. Legal Disclosures 2014 ExxonMobil. To the extent the user is entitled to disclose and distribute this document, the user may forward, distribute, and/or photocopy this copyrighted...

  11. Property:Real-Time | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag Jump to:ID8/Organization RAPID/Contact/ID8/Position RAPID/Contact/ID8/NameReal-Time

  12. Real Time Simulation of Power Grid Disruptions

    SciTech Connect (OSTI)

    Chinthavali, Supriya [ORNL; Dimitrovski, Aleksandar D [ORNL; Fernandez, Steven J [ORNL; Groer, Christopher S [ORNL; Nutaro, James J [ORNL; Olama, Mohammed M [ORNL; Omitaomu, Olufemi A [ORNL; Shankar, Mallikarjun [ORNL; Spafford, Kyle L [ORNL; Vacaliuc, Bogdan [ORNL

    2012-11-01T23:59:59.000Z

    DOE-OE and DOE-SC workshops (Reference 1-3) identified the key power grid problem that requires insight addressable by the next generation of exascale computing is coupling of real-time data streams (1-2 TB per hour) as the streams are ingested to dynamic models. These models would then identify predicted disruptions in time (2-4 seconds) to trigger the smart grid s self healing functions. This project attempted to establish the feasibility of this approach and defined the scientific issues, and demonstrated example solutions to important smart grid simulation problems. These objectives were accomplished by 1) using the existing frequency recorders on the national grid to establish a representative and scalable real-time data stream; 2) invoking ORNL signature identification algorithms; 3) modeling dynamically a representative region of the Eastern interconnect using an institutional cluster, measuring the scalability and computational benchmarks for a national capability; and 4) constructing a prototype simulation for the system s concept of smart grid deployment. The delivered ORNL enduring capability included: 1) data processing and simulation metrics to design a national capability justifying exascale applications; 2) Software and intellectual property built around the example solutions; 3) demonstrated dynamic models to design few second self-healing.

  13. Residential Real-time Price Response Simulation

    SciTech Connect (OSTI)

    Widergren, Steven E.; Subbarao, Krishnappa; Chassin, David P.; Fuller, Jason C.; Pratt, Robert G.

    2011-10-10T23:59:59.000Z

    The electric industry is gaining experience with innovative price responsive demand pilots and limited roll-outs to customers. One of these pilots is investigating real-time pricing signals to engage end-use systems and local distributed generation and storage in a distributed optimization process. Attractive aspects about the approach include strong scalability characteristics, simplified interfaces between automation devices, and the adaptability to integrate a wide variety of devices and systems. Experience in this nascent field is revealing a rich array of for engineering decisions and the application of complexity theory. To test the decisions, computer simulations are used to reveal insights about design, demand elasticity, and the limits of response (including consumer fatigue). Agent-based approaches lend themselves well in the simulation to modeling the participation and interaction of each piece of equipment on a distribution feeder. This paper discusses rate design and simulation experiences at the distribution feeder level where consumers and their HVAC systems and water heaters on a feeder receive real-time pricing signals.

  14. Ames Lab 101: Real-Time 3D Imaging

    ScienceCinema (OSTI)

    Zhang, Song

    2012-08-29T23:59:59.000Z

    Ames Laboratory scientist Song Zhang explains his real-time 3-D imaging technology. The technique can be used to create high-resolution, real-time, precise, 3-D images for use in healthcare, security, and entertainment applications.

  15. Fast-paced, real-time multifaceted action Complex battlefield

    E-Print Network [OSTI]

    Ernst, Damien

    for the design of intelligent agents for real-time strategy games Next steps Raphael Fonteneau is a postdoctoral

  16. Automatic Performance Visualization of Distributed Real-time systems

    E-Print Network [OSTI]

    Harmon, Trevor; Klefstad, Raymond

    2006-01-01T23:59:59.000Z

    execution deadlines. Non-intrusive monitoringThe currentknown as Real-time Non-Intrusive (RTNI) monitoring. This

  17. Real time speech formant analyzer and display

    DOE Patents [OSTI]

    Holland, George E. (Ames, IA); Struve, Walter S. (Ames, IA); Homer, John F. (Ames, IA)

    1987-01-01T23:59:59.000Z

    A speech analyzer for interpretation of sound includes a sound input which converts the sound into a signal representing the sound. The signal is passed through a plurality of frequency pass filters to derive a plurality of frequency formants. These formants are converted to voltage signals by frequency-to-voltage converters and then are prepared for visual display in continuous real time. Parameters from the inputted sound are also derived and displayed. The display may then be interpreted by the user. The preferred embodiment includes a microprocessor which is interfaced with a television set for displaying of the sound formants. The microprocessor software enables the sound analyzer to present a variety of display modes for interpretive and therapeutic used by the user.

  18. REAL TIME DATA FOR REMEDIATION ACTIVITIES [11505

    SciTech Connect (OSTI)

    BROCK CT

    2011-01-13T23:59:59.000Z

    Health physicists from the CH2M HILL Plateau Remediation Company collaborated with Berkeley Nucleonics Corporation to modify the SAM 940 isotope identifier instrument to be used for nuclear waste remediation. These modifications coupled with existing capabilities of the SAM 940 have proven to be invaluable during remediation activities, reducing disposal costs by allowing swift remediation of targeted areas that have been identified as having isotopes of concern (IOC), and eliminating multiple visits to sites by declaring an excavation site clear of IOCs before demobilizing from the site. These advantages are enabled by accumulating spectral data for specific isotopes that is nearly 100 percent free of false positives, which are filtered out in 'real time.'

  19. Real time speech formant analyzer and display

    DOE Patents [OSTI]

    Holland, G.E.; Struve, W.S.; Homer, J.F.

    1987-02-03T23:59:59.000Z

    A speech analyzer for interpretation of sound includes a sound input which converts the sound into a signal representing the sound. The signal is passed through a plurality of frequency pass filters to derive a plurality of frequency formants. These formants are converted to voltage signals by frequency-to-voltage converters and then are prepared for visual display in continuous real time. Parameters from the inputted sound are also derived and displayed. The display may then be interpreted by the user. The preferred embodiment includes a microprocessor which is interfaced with a television set for displaying of the sound formants. The microprocessor software enables the sound analyzer to present a variety of display modes for interpretive and therapeutic used by the user. 19 figs.

  20. In-line real time air monitor

    DOE Patents [OSTI]

    Wise, Marcus B. (Kingston, TN); Thompson, Cyril V. (Knoxville, TN)

    1998-01-01T23:59:59.000Z

    An in-line gas monitor capable of accurate gas composition analysis in a continuous real time manner even under strong applied vacuum conditions operates by mixing an air sample with helium forming a sample gas in two complementary sample loops embedded in a manifold which includes two pairs of 3-way solenoid valves. The sample gas is then analyzed in an ion trap mass spectrometer on a continuous basis. Two valve drivers actuate the two pairs of 3-way valves in a reciprocating fashion, so that there is always flow through the in-line gas monitor via one or the other of the sample loops. The duty cycle for the two pairs of 3-way valves is varied by tuning the two valve drivers to a duty cycle typically between 0.2 to 0.7 seconds.

  1. In-line real time air monitor

    DOE Patents [OSTI]

    Wise, M.B.; Thompson, C.V.

    1998-07-14T23:59:59.000Z

    An in-line gas monitor capable of accurate gas composition analysis in a continuous real time manner even under strong applied vacuum conditions operates by mixing an air sample with helium forming a sample gas in two complementary sample loops embedded in a manifold which includes two pairs of 3-way solenoid valves. The sample gas is then analyzed in an ion trap mass spectrometer on a continuous basis. Two valve drivers actuate the two pairs of 3-way valves in a reciprocating fashion, so that there is always flow through the in-line gas monitor via one or the other of the sample loops. The duty cycle for the two pairs of 3-way valves is varied by tuning the two valve drivers to a duty cycle typically between 0.2 to 0.7 seconds. 3 figs.

  2. REAL-TIME NON-PHOTOREALISTIC RENDERING TECHNIQUES

    E-Print Network [OSTI]

    Weske, Mathias

    REAL-TIME NON-PHOTOREALISTIC RENDERING TECHNIQUES FOR ILLUSTRATING 3D SCENES AND THEIR DYNAMICS This thesis addresses real-time non-photorealistic rendering techniques and their applications in interactive visualization. Real-time rendering has emerged as an important discipline within computer graphics developing

  3. Adaptive Fault Tolerance in Real Time Cloud Computing Sheheryar Malik

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    Adaptive Fault Tolerance in Real Time Cloud Computing Sheheryar Malik Research Team OASIS INRIA.huet@inria.fr Abstract -- With the increasing demand and benefits of cloud computing infrastructure, real time computing can be performed on cloud infrastructure. A real time system can take advantage of intensive computing

  4. Dannenberg and Thompson, Real-Time Software Synthesis on Superscalar Architectures Real-Time Software Synthesis on Superscalar

    E-Print Network [OSTI]

    Dannenberg, Roger B.

    Dannenberg and Thompson, Real-Time Software Synthesis on Superscalar Architectures 1 Real-Time Software Synthesis on Superscalar Architectures1 Roger B. Dannenberg and Nick Thompson School of Computer: Roger B. Dannenberg and Nick Thompson, "Real-Time Software Synthesis on Superscalar Architectures

  5. Optimizing near real time accountability for reprocessing.

    SciTech Connect (OSTI)

    Cipiti, Benjamin B.

    2010-06-01T23:59:59.000Z

    Near Real Time Accountability (NRTA) of actinides at high precision in reprocessing plants has been a long sought-after goal in the safeguards community. Achieving this goal is hampered by the difficulty of making precision measurements in the reprocessing environment, equipment cost, and impact to plant operations. Thus the design of future reprocessing plants requires an optimization of different approaches. The Separations and Safeguards Performance Model, developed at Sandia National Laboratories, was used to evaluate a number of NRTA strategies in a UREX+ reprocessing plant. Strategies examined include the incorporation of additional actinide measurements of internal plant vessels, more use of process monitoring data, and the option of periodic draining of inventory to key tanks. Preliminary results show that the addition of measurement technologies can increase the overall measurement uncertainty due to additional error propagation, so care must be taken when designing an advanced system. Initial results also show that relying on a combination of different NRTA techniques will likely be the best option. The model provides a platform for integrating all the data. The modeling results for the different NRTA options under various material loss conditions will be presented.

  6. Arnold Schwarzenegger REAL-TIME GRID RELIABILITY

    E-Print Network [OSTI]

    monitoring and tracking of phase angles between sources and sink buses within the Western Interconnection System Prototype Source: CERTS License Agreements and Copyrights / Non-Disclosure Agreements The Real subject to non-disclosure agreement between data providers and California ISO. #12;iii Table of Contents

  7. Evaluation of Concurrency Control Strategies for Mixed Soft Real-Time Database Systems

    E-Print Network [OSTI]

    Cheng, Reynold Cheng Chun

    1 Evaluation of Concurrency Control Strategies for Mixed Soft Real-Time Database Systems Kam soft real-time database systems (MSRTDBS), in which both non-real-time and soft real-time transactions of both soft real-time and non-real-time transactions under different real-time supports in the system

  8. Real-Time Dispatchability of Bulk Power Systems with Volatile ...

    E-Print Network [OSTI]

    2015-03-16T23:59:59.000Z

    the concept of real-time dispatchability (RTDA) of power systems with variable energy resources .... eration control, economic dispatch and unit commitment. Ref

  9. Optimization Online - Stochastic Real-Time Scheduling of Wind ...

    E-Print Network [OSTI]

    Alireza Soroudi

    2015-01-03T23:59:59.000Z

    Jan 3, 2015 ... Stochastic Real-Time Scheduling of Wind-thermal Generation Units in an Electric Utility. Alireza Soroudi (alireza.soroudi ***at*** ucd.ie)

  10. Optimization Online - Real-Time Dispatchability of Bulk Power ...

    E-Print Network [OSTI]

    Wei Wei

    2015-03-16T23:59:59.000Z

    Mar 16, 2015 ... Real-Time Dispatchability of Bulk Power Systems with Volatile Renewable Generations. Wei Wei (wei-wei04 ***at*** mails.tsinghua.edu.cn)

  11. A Survey of Utility Experience with Real Time Pricing

    E-Print Network [OSTI]

    Barbose, Galen; Goldman, Charles; Neenan, Bernie

    2004-01-01T23:59:59.000Z

    Day Ahead Hourly Time of Use Tariff Description This is aTariff Name Real Time Pricing: Non-Residential Service Day Ahead Hourly Time of Use

  12. One-way, real time wave front converters

    SciTech Connect (OSTI)

    Kwong, S.; Yariv, A.

    1986-03-03T23:59:59.000Z

    Optical one-way, real time wave front cleanup by means of photorefractively pumped oscillators is reported. A factor of 4000 increase in beam brightness has been achieved.

  13. Sandia National Laboratories: Cost Effective Real Time Wave Assessment...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cost Effective Real Time Wave Assessment Tool ARPAe: Innovation Activities On November 25, 2013, in Technology Showcase Nominees Partnering with Sandia Research Facilities Current...

  14. Real-Time Pricing of Electricity: An Assessment

    E-Print Network [OSTI]

    Baughman, M. L.; Zarnikau, J.

    . This paper reviews one of these new rate design proposals, "spot market" or "real-time" pricing, and discusses some recent implementations in Texas....

  15. Sandia National Laboratories: real-time industrial energy management...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    grid integration of renewable-energy resources, real-time residential and industrial energy management and control, lifetime degradation and science and various forms of advanced...

  16. Unified Modeling of Complex Real-Time Control Systems

    E-Print Network [OSTI]

    Hai, He; Chi-Lan, Cai

    2011-01-01T23:59:59.000Z

    Complex real-time control system is a software dense and algorithms dense system, which needs modern software engineering techniques to design. UML is an object-oriented industrial standard modeling language, used more and more in real-time domain. This paper first analyses the advantages and problems of using UML for real-time control systems design. Then, it proposes an extension of UML-RT to support time-continuous subsystems modeling. So we can unify modeling of complex real-time control systems on UML-RT platform, from requirement analysis, model design, simulation, until generation code.

  17. DOE Announces Webinars on Real Time Energy Management, Solar...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    typically required. You can also watch archived webinars and browse previously aired videos, slides, and transcripts. Upcoming Webinars February 4: Live Webinar on Real Time...

  18. Real-time flavour tagging selection in ATLAS

    E-Print Network [OSTI]

    Bertella, Claudia; The ATLAS collaboration

    2015-01-01T23:59:59.000Z

    In high-energy physics experiments, online selection is crucial to identify the few interesting collisions from the large data volume processed. In the overall ATLAS trigger strategy, b-jet triggers are designed to identify heavy-flavor content in real-time and, in particular, provide the only option to efficiently record events with fully hadronic final states containing b-jets. In doing so, two different, but related, challenges are faced. The physics goal is to optimise as far as possible the rejection of light jets from QCD processes, while retaining a high efficiency on selecting jets from beauty, while maintaining affordable trigger rates without raising jet energy thresholds. This maps into a challenging computing task, as charged tracks and their corresponding vertexes must be reconstructed and analysed for each jet above the desired threshold, regardless of the increasingly harsh pile-up conditions. The performance of b-jet triggers during the LHC Run 1 data-taking campaigns is presented, together wi...

  19. Instrumentation development for real time brainwave monitoring.

    SciTech Connect (OSTI)

    Anderson, Lawrence Frederick; Clough, Benjamin W.

    2005-12-01T23:59:59.000Z

    The human brain functions through a chemically-induced biological process which operates in a manner similar to electrical systems. The signal resulting from this biochemical process can actually be monitored and read using tools and having patterns similar to those found in electrical and electronics engineering. The primary signature of this electrical activity is the ''brain wave'', which looks remarkably similar to the output of many electrical systems. Likewise, the device currently used in medical arenas to read brain electrical activity is the electroencephalogram (EEG) which is synonymous with a multi-channel oscilloscope reading. Brain wave readings and recordings for medical purposes are traditionally taken in clinical settings such as hospitals, laboratories or diagnostic clinics. The signal is captured via externally applied scalp electrodes using semi-viscous gel to reduce impedance. The signal will be in the 10 to 100 microvolt range. In other instances, where surgeons are attempting to isolate particular types of minute brain signals, the electrodes may actually be temporarily implanted in the brain during a preliminary procedure. The current configurations of equipment required for EEGs involve large recording instruments, many electrodes, wires, and large amounts of hard disk space devoted to storing large files of brain wave data which are then eventually analyzed for patterns of concern. Advances in sensors, signal processing, data storage and microelectronics over the last decade would seem to have paved the way for the realization of devices capable of ''real time'' external monitoring, and possible assessment, of brain activity. A myriad of applications for such a capability are likewise presenting themselves, including the ability to assess brain functioning, level of functioning and malfunctioning. Our plan is to develop the sensors, signal processing, and portable instrumentation package which could capture, analyze, and communicate information on brain activity which could be of use to the individual, medical personnel or in other potential arenas. To take this option one step further, one might foresee that the signal would be captured, analyzed, and communicated to a person or device and which would result an action or reaction by that person or device. It is envisioned that ultimately a system would include a sensor detection mechanism, transmitter, receiver, microprocessor and associated memory, and audio and/or visual alert system. If successful in prototyping, the device could be considered for eventual implementation in ASIC form or as a fully integrated CMOS microsystem.

  20. Real-Time Message Routing and Scheduling Ronald Koch1

    E-Print Network [OSTI]

    Nabben, Reinhard

    Real-Time Message Routing and Scheduling Ronald Koch1 , Britta Peis1 , Martin Skutella1.math.tu-berlin.de/coga/ Abstract. Exchanging messages between nodes of a network (e.g., em- bedded computers) is a fundamental issue in real-time systems involving critical routing and scheduling decisions. In order for messages

  1. Flexible Scheduling Methods and Tools for Real-Time Control

    E-Print Network [OSTI]

    , and real-time control systems constitute an important subclass of these embedded systems. Modern automoFlexible Scheduling Methods and Tools for Real-Time Control Systems Dan Henriksson Department- tive systems, e.g., contain several embedded ECUs (electronic control units) used for various feedback

  2. Realistic Rendering of an Organ Surface in Real-Time

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    Realistic Rendering of an Organ Surface in Real-Time for Laparoscopic Surgery Simulation Raphal : 10.1007/s003710100118 #12;Abstract This paper deals with the rendering issues of the problem. To meet the real-time constraint we use advanced graphics features such as multi- pass rendering, Open

  3. Power Minimisation for Real-time Dataflow Applications

    E-Print Network [OSTI]

    Kuzmanov, Georgi

    at lower frequencies on hardware resources thereby consuming less power. Real-time applications have for dataflow modelled real-time applications that may be mapped onto multiple hardware resources. We achieve this by using an application's static slack in order to perform DVFS while still satisfying the application

  4. NSTX Real-Time Control GUI User's Guide

    E-Print Network [OSTI]

    Princeton Plasma Physics Laboratory

    the use of the Power Supply Real-Time Control (PSRTC) Graphical User Interface (GUI), shown below. AsideNSTX Real-Time Control GUI User's Guide March 28, 2008 #12;This document is meant to describe from the PCS, the NSTX control system is made up of several executables/applications that each function

  5. Real-Time Networked Control with Multiple Clients

    E-Print Network [OSTI]

    Lee, Minhyung

    2010-01-14T23:59:59.000Z

    robot referred to as Clients 1, 2, and 3, respectively were used as Networked-Based-control (NCS) test beds to validate the proposed strategies. For real-time operation, Linux with Real-Time Application Interface (RTAI) and Control and Measurement...

  6. Real-time Remote Sensing of Snowmobiles Emissions at

    E-Print Network [OSTI]

    Denver, University of

    Real-time Remote Sensing of Snowmobiles Emissions at Yellowstone National Park: An Oxygenated Fuel 68509 #12;Real-time Remote Sensing of Snowmobile Emissions at Yellowstone National Park 2 Executive emissions from snowmobiles. Ratios of CO, HC and toluene to CO2 were measured and used to calculate %CO, %HC

  7. From Ptides to PtidyOS, Designing Distributed Real-Time Embedded Systems

    E-Print Network [OSTI]

    Zou, Jia

    2011-01-01T23:59:59.000Z

    hard real-time and soft real-time systems. Hard real-timein immediate system failures, while soft real-time systemsof both hard and soft real-time sub-systems. To address this

  8. Real time or faster-than-real-time simulation of airflow in buildings Wangda Zuo Qingyan Chen*

    E-Print Network [OSTI]

    Chen, Qingyan "Yan"

    Real time or faster-than-real-time simulation of airflow in buildings Wangda Zuo Qingyan Chen flow simulation is crucial for emergency management in buildings, such as fire and accidental or intentional release of chemical/biological agents (contaminants). The simulation results can then be used

  9. A real-time airborne scatterometer data processor

    E-Print Network [OSTI]

    Reisor, Gary James

    1976-01-01T23:59:59.000Z

    A REAL-TIME AIRBORNE SCATTEROMETER DATA PROCES'SOR A Thesis by Gary James Reisor Submitted to the Graduate College of Texas A)M Vniversity in partial fulfillment of the requirement for the degree of MASTER OF SCIENCE August 1976 Major... Subject: Electrical Fngineering A REAL-TIME AIRBORNE SCATTEROMETER DATA PROCESSOR A Thesis by Gary James Reisor Approved as to style and content by: arrman o Committee Hea o Depa tment em er Mem er August 1976 ABSTRACT A Real-time Airborne...

  10. A Novel comprehensive method for real time Video Motion Detection Surveillance

    E-Print Network [OSTI]

    Mishra, Sumita

    2011-01-01T23:59:59.000Z

    This article describes a comprehensive system for surveillance and monitoring applications. The development of an efficient real time video motion detection system is motivated by their potential for deployment in the areas where security is the main concern. The paper presents a platform for real time video motion detection and subsequent generation of an alarm condition as set by the parameters of the control system. The prototype consists of a mobile platform mounted with RF camera which provides continuous feedback of the environment. The received visual information is then analyzed by user for appropriate control action, thus enabling the user to operate the system from a remote location. The system is also equipped with the ability to process the image of an object and generate control signals which are automatically transmitted to the mobile platform to track the object.

  11. IT Licentiate theses Practical Verification of Real-Time Systems

    E-Print Network [OSTI]

    David, Alexandre

    IT Licentiate theses 2001-013 Practical Verification of Real-Time Systems ALEXANDRE DAVID UPPSALA UPPSALA SWEDEN Dissertation for the degree of Licentiate of Philosophy in Computer Science at Uppsala

  12. IT Licentiate theses Practical Verification of RealTime Systems

    E-Print Network [OSTI]

    David, Alexandre

    IT Licentiate theses 2001013 Practical Verification of RealTime Systems ALEXANDRE DAVID UPPSALA UPPSALA SWEDEN Dissertation for the degree of Licentiate of Philosophy in Computer Science at Uppsala

  13. Real-time analog acquisition of electrophysiological signals with Soma

    E-Print Network [OSTI]

    Jonas, Eric Michael

    2009-01-01T23:59:59.000Z

    Soma is a high-density recording system for real-time acquisition and analysis of extracellular electrophysiological signals. Here I describe the design, implementation, and evaluation of the Soma Acquisition Board, an ...

  14. Decoupled Sampling for Real-Time Graphics Pipelines

    E-Print Network [OSTI]

    Ragan-Kelley, Jonathan

    2010-03-29T23:59:59.000Z

    We propose decoupled sampling, an approach that decouples shading from visibility sampling in order to enable motion blur and depth-of-field at reduced cost. More generally, it enables extensions of modern real-time graphics ...

  15. Volatility of Power Grids Under Real-Time Pricing

    E-Print Network [OSTI]

    Roozbehani, Mardavij

    The paper proposes a framework for modeling and analysis of the dynamics of supply, demand, and clearing prices in power systems with real-time retail pricing and information asymmetry. Characterized by passing on the ...

  16. Real-time Water Waves with Wave Particles

    E-Print Network [OSTI]

    Yuksel, Cem

    2010-10-12T23:59:59.000Z

    This dissertation describes the wave particles technique for simulating water surface waves and two way fluid-object interactions for real-time applications, such as video games. Water exists in various different forms in our environment...

  17. Repsol Cartagena Utilities Real Time Optimization -- A Success Story

    E-Print Network [OSTI]

    Piccolo, M.; Shyr, S.

    Repsol Cartagena Utilities Real Time Optimization - A Success Story Mike Piccolo and Steve Shyr, Honeywell, and TBD, Repsol, Spain In 1998 Honeywell Hi-Spec Solutions successfully implemented a Utilities Optimization system at Repsol' s Cartagena...

  18. New Real-Time Quantum Efficiency Measurement System: Preprint

    SciTech Connect (OSTI)

    Young, D. L.; Egaas, B.; Pinegar, S.; Stradins, P.

    2008-05-01T23:59:59.000Z

    This paper describes a newly developed technique for measuring the quantum eficiiency in solar cells in real-time using a unique, electronically controlled, full-spectrum light source.

  19. Energy Efficient Scheduling for Real-Time Systems

    E-Print Network [OSTI]

    Gupta, Nikhil

    2012-02-14T23:59:59.000Z

    The goal of this dissertation is to extend the state of the art in real-time scheduling algorithms to achieve energy efficiency. Currently, Pfair scheduling is one of the few scheduling frameworks which can optimally schedule a periodic real...

  20. Extending STI for Demanding Hard-Real-Time Systems Deepaksrivats

    E-Print Network [OSTI]

    Dean, Alexander G.

    Extending STI for Demanding Hard-Real-Time Systems Benjamin Welch Shobhit Kanaujia Adarsh Seetharam to implement given functionality on a generic processor, saving money, power, and energy and simplifying design

  1. FUTURE POWER GRID INITIATIVE Real-time High-Performance

    E-Print Network [OSTI]

    FUTURE POWER GRID INITIATIVE Real-time High-Performance Computing Infrastructure for Next- Generation Power Grid Analysis OBJECTIVE We are developing infrastructure, software, formal models for real Infrastructure Operations Center (EIOC), the Pacific Northwest National Laboratory's (PNNL) national electric

  2. GPU programming for real-time watercolor simulation

    E-Print Network [OSTI]

    Scott, Jessica Stacy

    2005-02-17T23:59:59.000Z

    simulated watercolors in real time. The GPU, or Graphics Processing Unit, is an effcient and highly parallel processor located on the graphics card of a computer; GPU programming is touted as a way to improve performance in graphics and non...

  3. Real time density functional simulations of quantum scale conductance

    E-Print Network [OSTI]

    Evans, Jeremy Scott

    2009-01-01T23:59:59.000Z

    We study electronic conductance through single molecules by subjecting a molecular junction to a time dependent potential and propagating the electronic state in real time using time-dependent density functional theory ...

  4. Real-time continuous gesture recognition for natural multimodal interaction

    E-Print Network [OSTI]

    Yin, Ying, Ph. D. Massachusetts Institute of Technology

    2014-01-01T23:59:59.000Z

    I have developed a real-time continuous gesture recognition system capable of dealing with two important problems that have previously been neglected: (a) smoothly handling two different kinds of gestures: those characterized ...

  5. A practical acceleration algorithm for real-time imaging

    E-Print Network [OSTI]

    Sumbul, Uygar

    A practical acceleration algorithm for real-time magnetic resonance imaging (MRI) is presented. Neither separate training scans nor embedded training samples are used. The Kalman filter based algorithm provides a fast and ...

  6. High speed, real-time, camera bandwidth converter

    DOE Patents [OSTI]

    Bower, Dan E; Bloom, David A; Curry, James R

    2014-10-21T23:59:59.000Z

    Image data from a CMOS sensor with 10 bit resolution is reformatted in real time to allow the data to stream through communications equipment that is designed to transport data with 8 bit resolution. The incoming image data has 10 bit resolution. The communication equipment can transport image data with 8 bit resolution. Image data with 10 bit resolution is transmitted in real-time, without a frame delay, through the communication equipment by reformatting the image data.

  7. Measurement function paces move to real-time pipe line

    SciTech Connect (OSTI)

    Leitschuh, R.C. Jr. (Tenneco Gas, Houston, TX (United States))

    1994-05-01T23:59:59.000Z

    As progressive companies confront today's demanding competitive environment, trends are developing in the quest for the ideal pipe line operating system. Common among strategies is the concept of real time'' operations. Real time must be built and it will be defined by its weakest link. Ideally, real time should be a condition where any authorized person can access the system and obtain information that is current at any time. Real time necessitates that data are not just generated or collected on a continuous basis but are given added value and processed continuously and instantaneously. Ultimately, real time implies that queried information is accurate and can be used without correction or alteration. Generally, measurement hardware can be divided into three groups: Transmitters to acquire the dynamic variables of pressures and temperatures; Gas property determination equipment such as chromatographs, calorimeters and gravitometers for gas composition variables; Flow computers for processing and adding value to data. This paper discusses these components along with software systems, measurement methods, correction methods and cost benefit.

  8. Performance study of GPUs in real-time trigger applications for HEP experiments

    SciTech Connect (OSTI)

    Ketchum, W.; /Chicago U.; Amerio, S.; /INFN, Padua; Bastieri, D.; Bauce, M.; /INFN, Padua /Padua U.; Catastini, P.; /Fermilab; Gelain, S.; /Padua U.; Hahn, K.; /Fermilab; Kim, Y.K.; /Fermilab /Chicago U.; Liu, T.; /Fermilab; Lucchesi, D.; /INFN, Padua /Padua U.; Urso, G.; ,

    2011-06-01T23:59:59.000Z

    Graphical Processing Units (GPUs) have evolved into highly parallel, multi-threaded, multicore powerful processors with high memory bandwidth. GPUs are used in a variety of intensive computing applications. The combination of highly parallel architecture and high memory bandwidth makes GPUs a potentially promising technology for effective real-time processing for High Energy Physics (HEP) experiments. However, not much is known of their performance in real-time applications that require low latency, such as the trigger for HEP experiments. We describe an R and D project with the goal to study the performance of GPU technology for possible low latency applications, performing basic operations as well as some more advanced HEP lower-level trigger algorithms (such as fast tracking or jet finding). We present some preliminary results on timing measurements, comparing the performance of a CPU versus a GPU with NVIDIA's CUDA general-purpose parallel computing architecture, carried out at CDF's Level-2 trigger test stand. These studies will provide performance benchmarks for future studies to investigate the potential and limitations of GPUs for real-time applications in HEP experiments.

  9. Test applications for heterogeneous real-time network testbed

    SciTech Connect (OSTI)

    Mines, R.F.; Knightly, E.W.

    1994-07-01T23:59:59.000Z

    This paper investigates several applications for a heterogeneous real-time network testbed. The network is heterogeneous in terms of network devices, technologies, protocols, and algorithms. The network is real-time in that its services can provide per-connection end-to-end performance guarantees. Although different parts of the network use different algorithms, all components have the necessary mechanisms to provide performance guarantees: admission control and priority scheduling. Three applications for this network are described in this paper: a video conferencing tool, a tool for combustion modeling using distributed computing, and an MPEG video archival system. Each has minimum performance requirements that must be provided by the network. By analyzing these applications, we provide insights to the traffic characteristics and performance requirements of practical real-time loads.

  10. Storm Water Analytical Period

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Protection Obeying Environmental Laws Individual Permit Storm Water Analytical Period Storm Water Analytical Period The Individual Permit authorizes the discharge of storm...

  11. Toward Real Time Data Analysis for Smart Grids

    SciTech Connect (OSTI)

    Yin, Jian; Gorton, Ian; Sharma, Poorva

    2012-11-10T23:59:59.000Z

    This paper describes the architecture and design of a novel system for supporting large-scale real-time data analysis for future power grid systems. The widespread deployment of renewable generation, smart grid controls, energy storage, plug-in hybrids, and new conducting materials will require fundamental changes in the operational concepts and principal components of the grid. As a result, the whole system becomes highly dynamic and requires constant adjusting based on real time data. Even though millions of sensors such as phase measurement units (PMU) and smart meters are being widely deployed, a data layer that can analyze this amount of data in real time is needed. Unlike the data fabric in other cloud services, the data layer for smart grids has some unique design requirements. First, this layer must provide real time guarantees. Second, this layer must be scalable to allow a large number of applications to access the data from millions of sensors in real time. Third, reliability is critical and this layer must be able to continue to provide service in face of failures. Fourth, this layer must be secure. We address these challenges though a scalable system architecture that integrates the I/O and data processing capability in a devise set of devices. Data process operations can be placed anywhere from sensors, data storage devices, to control centers. We further employ compression to improve performance. We design a lightweight compression customized for power grid data. Our system can reduce end-to-end response time by reduce I/O overhead through compression and overlap compression operations with I/O. The initial prototype of our system was demonstrated with several use cases from PNNLs FPGI and show that our system can provide real time guarantees to a diverse set of applications.

  12. Towards Real Time Diagnostics of Hybrid Welding Laser/GMAW

    SciTech Connect (OSTI)

    Timothy Mcjunkin; Dennis C. Kunerth; Corrie Nichol; Evgueni Todorov; Steve Levesque; Feng Yu; Robert Danna Couch

    2013-07-01T23:59:59.000Z

    Methods are currently being developed towards a more robust system real time feedback in the high throughput process combining laser welding with gas metal arc welding. A combination of ultrasonic, eddy current, electronic monitoring, and visual techniques are being applied to the welding process. Initial simulation and bench top evaluation of proposed real time techniques on weld samples are presented along with the concepts to apply the techniques concurrently to the weld process. Consideration for the eventual code acceptance of the methods and system are also being researched as a component of this project. The goal is to detect defects or precursors to defects and correct when possible during the weld process.

  13. Towards real time diagnostics of Hybrid Welding Laser/GMAW

    SciTech Connect (OSTI)

    McJunkin, T. R.; Kunerth, D. C.; Nichol, C. I. [Idaho National Laboratory, Idaho Falls, ID 83415-3570 (United States); Todorov, E.; Levesque, S. [Edison Welding Institute, Columbus, OH (United States)

    2014-02-18T23:59:59.000Z

    Methods are currently being developed towards a more robust system real time feedback in the high throughput process combining laser welding with gas metal arc welding. A combination of ultrasonic, eddy current, electronic monitoring, and visual techniques are being applied to the welding process. Initial simulation and bench top evaluation of proposed real time techniques on weld samples are presented along with the concepts to apply the techniques concurrently to the weld process. Consideration for the eventual code acceptance of the methods and system are also being researched as a component of this project. The goal is to detect defects or precursors to defects and correct when possible during the weld process.

  14. Integration of Real-Time Data Into Building Automation Systems

    SciTech Connect (OSTI)

    Mark J. Stunder; Perry Sebastian; Brenda A. Chube; Michael D. Koontz

    2003-04-16T23:59:59.000Z

    The project goal was to investigate the possibility of using predictive real-time information from the Internet as an input to building management system algorithms. The objectives were to identify the types of information most valuable to commercial and residential building owners, managers, and system designers. To comprehensively investigate and document currently available electronic real-time information suitable for use in building management systems. Verify the reliability of the information and recommend accreditation methods for data and providers. Assess methodologies to automatically retrieve and utilize the information. Characterize equipment required to implement automated integration. Demonstrate the feasibility and benefits of using the information in building management systems. Identify evolutionary control strategies.

  15. Flash Memory Garbage Collection in Hard Real-Time Systems

    E-Print Network [OSTI]

    Lai, Chien-An

    2012-10-19T23:59:59.000Z

    collection and compare it to that of more proactive schemes. I develop formulas to assess the schedulability of hard real- time periodic task sets under simpli ed memory consumption models. Results show that I prove the proactive schemes achieve the larger... work in the area of ash memory management. Moreover, we review the previous research about garbage collection in real-time system. In Chapter III we will describe a simpli ed ash memory model that will be used throughout the rest of the thesis...

  16. A heterogeneous hierarchical architecture for real-time computing

    SciTech Connect (OSTI)

    Skroch, D.A.; Fornaro, R.J.

    1988-12-01T23:59:59.000Z

    The need for high-speed data acquisition and control algorithms has prompted continued research in the area of multiprocessor systems and related programming techniques. The result presented here is a unique hardware and software architecture for high-speed real-time computer systems. The implementation of a prototype of this architecture has required the integration of architecture, operating systems and programming languages into a cohesive unit. This report describes a Heterogeneous Hierarchial Architecture for Real-Time (H{sup 2} ART) and system software for program loading and interprocessor communication.

  17. Real-Time Chemical Imaging of Bacterial Biofilm Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)IntegratedSpeedingTechnicalPurchase,Reaction-Driven RestructuringReal-TimeReal-Time

  18. Real-Time Chemical Imaging of Bacterial Biofilm Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection Radiation ProtectionRaising fundsReal PropertyReal-TimeReal-Time

  19. Real-Time Building Energy Simulation Using EnergyPlus and the Building Controls Test Bed

    E-Print Network [OSTI]

    Pang, Xiufeng

    2013-01-01T23:59:59.000Z

    generation building energy simulation program. Energy andReal-Time Building Energy Simulation Using EnergyPlus andREAL-TIME BUILDING ENERGY SIMULATION USING ENERGYPLUS AND

  20. Improving Building Performance at Urban Scale with a Framework for Real-time Data Sharing

    E-Print Network [OSTI]

    Pang, Xiufeng

    2014-01-01T23:59:59.000Z

    Real-time Data Sharing Xiufeng Pang, Tianzhen Hong, Mary AnnReal-time Data Sharing Xiufeng Pang, Tianzhen Hong*, Mary

  1. Real-time MISO UWB Radio Testbed and Waveform Design

    E-Print Network [OSTI]

    Qiu, Robert Caiming

    Real-time MISO UWB Radio Testbed and Waveform Design Yu Song, Zhen Hu, Nan Guo, and Robert C. Qiu-input single-output (MISO) ultra-wideband (UWB) radio testbed, which involves Xinlix Virtex-5 Field in indoor environment. The transmitted MISO signals are optimized in the passband with a bandwidth up to 500

  2. Real-Time Redox Measurements during Endoplasmic Reticulum Stress Reveal

    E-Print Network [OSTI]

    Mullins, Dyche

    Real-Time Redox Measurements during Endoplasmic Reticulum Stress Reveal Interlinked Protein Folding.10.011 SUMMARY Disruption of protein folding in the endoplasmic reticulum (ER) causes unfolded proteins to accumu is active. Because ER redox po- tential is optimized for oxidative protein folding, we reasoned

  3. Real Time Computational Algorithms for Eddy Current Based Damage Detection

    E-Print Network [OSTI]

    Real Time Computational Algorithms for Eddy Current Based Damage Detection H. T. Banks y, Michele L such damages by application of an eddy current based technique coupled with reduced order modeling. We begin by developing a model for a speci#12;c eddy current method in which we make some simplifying assumptions

  4. Kalman Filter in Real Time URBIS Date Jan 2010

    E-Print Network [OSTI]

    Vuik, Kees

    2010-0000 Kalman Filter in Real Time URBIS Date Jan 2010 Author(s) R. Kranenburg Projectnumber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 4 Kalman Filter 14 4.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 4.2 Algorithm of Kalman Filtering . . . . . . . . . . . . . . . . . . . . 14 4.3 Sensitivity Tests

  5. Model Reference Adaptive Control Framework for Real Time Traffic

    E-Print Network [OSTI]

    Minnesota, University of

    Adaptive Control #12;12 Prescriptive Dynamic Traffic Assignment A Prediction Model and the Reference ModelModel Reference Adaptive Control Framework for Real Time Traffic Management Under Emergency Movement Volume Adaptive Controller Model Reference Adaptive Control (MRAC) Assumptions Super Zone Concept

  6. Compilation and Synthesis for Real-Time Embedded Controllers

    E-Print Network [OSTI]

    Müller-Olm, Markus

    Compilation and Synthesis for Real-Time Embedded Controllers Martin Fr¨anzle1 and Markus M¨uller-Olm.Fraenzle@Informatik.Uni-Oldenburg.DE 2 University of Dortmund, Department of Computer Science, FB 4, LS 5, 44221 Dortmund, Germany Markus.Mueller-Olm

  7. REAL-TIME EQUILIBRIUM RECONSTRUCTION IN A TOKAMAK

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    REAL-TIME EQUILIBRIUM RECONSTRUCTION IN A TOKAMAK J. Blum, C. Boulbe and B. Faugeras Laboratoire J reconstruction of the plasma current density in a Tokamak and of its equilibrium. The problem consists equilibrium of a plasma in a Tokamak. The experimental measurements that enable this identification

  8. Integrating Security and Real-Time Requirements Using Covert

    E-Print Network [OSTI]

    Son, Sang H.

    ÐConcurrency control, covert channel analysis, database systems, locking protocols, multilevel security, real secure database systems use an access control mechanism based on the Bell- LaPadula model [3]. This model. Multilevel security requirements introduce a new dimension to transaction processing in real-time database

  9. GENETIC ALGORITHMS APPLIED TO REAL TIME MULTIOBJECTIVE OPTIMIZATION PROBLEMS

    E-Print Network [OSTI]

    Coello, Carlos A. Coello

    of searching for multiple solutions concurrently in a single run. Transforming this multiobjective optimizationGENETIC ALGORITHMS APPLIED TO REAL TIME MULTIOBJECTIVE OPTIMIZATION PROBLEMS Z. BINGUL, A. S@harpo.tnstate.edu ABSTRACT Genetic algorithms are often well suited for multiobjective optimization problems. In this work

  10. Real-time Ray Tracing p et SMP Multiprocessor system

    E-Print Network [OSTI]

    af billeder med høj realisme, der på mange måder er traditionel (hardware) trekantsrasterisering scenen i real-time. #12;4 Resumé #12;5 Abstract Raytracing is a powerful technique for high resolution. Unfortunately raytracing has one weakness: - It demands a high amount of raw computer power! This almost always

  11. TOWARDS REAL-TIME GENERATION SCHEDULING IN MICROGRIDS WITH

    E-Print Network [OSTI]

    Zhang, Junshan

    TOWARDS REAL-TIME GENERATION SCHEDULING IN MICROGRIDS WITH PERFORMANCE GUARANTEE LIAN LU, JINLONG TU, CHI-KIN CHAU, MINGHUA CHEN, ZHAO XU AND XIAOJUN LIN INTRODUCTION Microgrid is an emerging- generation improves generation efficiency by 2-3x. A key problem in microgrid operations is how to schedule

  12. Timeliness via Speculation for Real-Time Databases Azer Bestavros

    E-Print Network [OSTI]

    extremes. PCC locking protocols detect con icts as soon as they occur and resolve them using blocking. OCC protocols detect con icts at transac- tion committime and resolve them using rollbacks (restarts). For real-time databases, blockages and rollbacks are hazards that increase the likelihood of transactions missing

  13. Real time sensors in geothermal fluids: their costs and benefits

    SciTech Connect (OSTI)

    Jensen, G.A.; Shannon, D.W.; Hazelton, R.F.

    1982-02-01T23:59:59.000Z

    A summary of the PNL effort, a background discussion on geothermal power plants, and a discussion of several cases where problems were identified and in some cases prevented are included. Cost factors, savings, and benefits-costs to the sponsor are summarized and brief conclusions concerning the benefits of having real time instrumentation installed in the power plant are characterized.

  14. Evaluating transport coefficients in real time thermal field theory

    E-Print Network [OSTI]

    S. Mallik; Sourav Sarkar

    2012-11-12T23:59:59.000Z

    Transport coefficients in a hadronic gas have been calculated earlier in the imaginary time formulation of thermal field theory. The steps involved are to relate the defining retarded correlation function to the corresponding time-ordered one and to evaluate the latter in the conventional perturbation expansion. Here we carry out both the steps in the real time formulation.

  15. Real Time Digital Processing of GPS Measurements for Transmission Engineering

    E-Print Network [OSTI]

    ; dynamic thermal line rating; transmission engineering. I. Introduction The Global Positioning System1 Real Time Digital Processing of GPS Measurements for Transmission Engineering C. Mensah-Bonsu G satellites launched and maintained by the United States gov- ernment. Power engineering applications based

  16. Model Predictive Control based Real Time Power System Protection Schemes

    E-Print Network [OSTI]

    Kumar, Ratnesh

    1 Model Predictive Control based Real Time Power System Protection Schemes Licheng Jin, Member by controlling the production, absorption as well as flow of reactive power at various locations in the system predictive control, trajectory sensitivity, voltage stabilization, switching control, power system I

  17. 2013 UEC Tokyo. Real-time Mobile Food

    E-Print Network [OSTI]

    Yanai, Keiji

    . miso soup 3. Egg sunny-side up 4. Sirloin cutlet 5. Salmom meuniere 6. Fried fish 7. Boiled fish 8 Real-time image recognition Estimation of the more reliable direction 3 key features of the system the result The window with the maximum score Estimation of the more reliable direction 1 result #12; 2013

  18. Concurrent and Real Time Systems: the CSP approach Steve Schneider

    E-Print Network [OSTI]

    Doran, Simon J.

    Concurrent and Real Time Systems: the CSP approach by Steve Schneider First published 1999 Systems the CSP approach Steve Schneider A Wiley-Interscience Publication JOHN WILEY & SONS, INC. New York Whitehead This book provides an introduction to Communicating Sequential Processes (CSP) and its use

  19. Constraint Orientated Specification with CSP and Real Time Temporal Logic

    E-Print Network [OSTI]

    Kent, University of

    Constraint Orientated Specification with CSP and Real Time Temporal Logic Justin Pearson Department Processes (CSP) [Hoa85] and a version of Propositional Temporal Logic (PTL), derived from [Eme90]. CSP. The behaviour of a CSP process is dependent on its environment; it is therefore difficult to assert global

  20. Hierarchical Architecture for Real-Time Adaptive Resource Management

    E-Print Network [OSTI]

    Cardei, Ionut

    , Mihaela Cardei1 , Allalaghatta Pavan2 Honeywell Technology Center 3660 Technology Drive, Minneapolis, MN 55418, USA 1 {ionut, mihaela}@cs.umn.edu, 2 {jha, pavan}@htc.honeywell.com Abstract. This paper presents the Real Time Adaptive Resource Management system (RTARM1 ), developed at the Honeywell Technology Center

  1. Functional Speci cation of Real-Time and Hybrid Systems ?

    E-Print Network [OSTI]

    of embedded real-time systems in a physical environment. Recently, a number of description and spec- i cationSys" and by BMW (Bay- erische Motoren Werke AG). #12;slight modi cations must be carried through, so, or sent to, the environment. Therefore, every channel re ects an input or output communication history

  2. REAL-TIME SYSTEMS AND NETWORKS Aspect-based methodology and model-driven tool for real-time embedded

    E-Print Network [OSTI]

    Baudoin, Genevive

    to handle model transformation complexities, improve consistency between control design and its: K. Perko. Real-time embedded control system (RTECS) design follows usually a V-process composed of three major steps: system control analysis (control law design), system specification (software design

  3. Robust Performance of Soft Real-time Networked Control Systems with Data Dropouts 1

    E-Print Network [OSTI]

    Lemmon, Michael

    Robust Performance of Soft Real-time Networked Control Systems with Data Dropouts 1 Qiang Ling, . This class of systems is a model for soft real-time control systems in which the feedback path is implemented, the networked control system becomes a soft real-time system. In soft real-time networks, data packets may

  4. Feedback Control of the Sawtooth Period through Real Time Control of the Ion Cyclotron Resonance Frequency

    E-Print Network [OSTI]

    Feedback Control of the Sawtooth Period through Real Time Control of the Ion Cyclotron Resonance Frequency

  5. Wide-area, real-time monitoring and visualization system

    DOE Patents [OSTI]

    Budhraja, Vikram S.; Dyer, James D.; Martinez Morales, Carlos A.

    2013-03-19T23:59:59.000Z

    A real-time performance monitoring system for monitoring an electric power grid. The electric power grid has a plurality of grid portions, each grid portion corresponding to one of a plurality of control areas. The real-time performance monitoring system includes a monitor computer for monitoring at least one of reliability metrics, generation metrics, transmission metrics, suppliers metrics, grid infrastructure security metrics, and markets metrics for the electric power grid. The data for metrics being monitored by the monitor computer are stored in a data base, and a visualization of the metrics is displayed on at least one display computer having a monitor. The at least one display computer in one said control area enables an operator to monitor the grid portion corresponding to a different said control area.

  6. Wide-area, real-time monitoring and visualization system

    DOE Patents [OSTI]

    Budhraja, Vikram S. (Los Angeles, CA); Dyer, James D. (La Mirada, CA); Martinez Morales, Carlos A. (Upland, CA)

    2011-11-15T23:59:59.000Z

    A real-time performance monitoring system for monitoring an electric power grid. The electric power grid has a plurality of grid portions, each grid portion corresponding to one of a plurality of control areas. The real-time performance monitoring system includes a monitor computer for monitoring at least one of reliability metrics, generation metrics, transmission metrics, suppliers metrics, grid infrastructure security metrics, and markets metrics for the electric power grid. The data for metrics being monitored by the monitor computer are stored in a data base, and a visualization of the metrics is displayed on at least one display computer having a monitor. The at least one display computer in one said control area enables an operator to monitor the grid portion corresponding to a different said control area.

  7. Real-time performance monitoring and management system

    DOE Patents [OSTI]

    Budhraja, Vikram S. (Los Angeles, CA); Dyer, James D. (La Mirada, CA); Martinez Morales, Carlos A. (Upland, CA)

    2007-06-19T23:59:59.000Z

    A real-time performance monitoring system for monitoring an electric power grid. The electric power grid has a plurality of grid portions, each grid portion corresponding to one of a plurality of control areas. The real-time performance monitoring system includes a monitor computer for monitoring at least one of reliability metrics, generation metrics, transmission metrics, suppliers metrics, grid infrastructure security metrics, and markets metrics for the electric power grid. The data for metrics being monitored by the monitor computer are stored in a data base, and a visualization of the metrics is displayed on at least one display computer having a monitor. The at least one display computer in one said control area enables an operator to monitor the grid portion corresponding to a different said control area.

  8. Subsystem real-time Time Dependent Density Functional Theory

    E-Print Network [OSTI]

    Krishtal, Alisa; Pavanello, Michele

    2015-01-01T23:59:59.000Z

    We present the extension of Frozen Density Embedding (FDE) theory to real-time Time Dependent Density Functional Theory (rt-TDDFT). FDE a is DFT-in-DFT embedding method that allows to partition a larger Kohn-Sham system into a set of smaller, coupled Kohn-Sham systems. Additional to the computational advantage, FDE provides physical insight into the properties of embedded systems and the coupling interactions between them. The extension to rt-TDDFT is done straightforwardly by evolving the Kohn-Sham subsystems in time simultaneously, while updating the embedding potential between the systems at every time step. Two main applications are presented: the explicit excitation energy transfer in real time between subsystems is demonstrated for the case of the Na$_4$ cluster and the effect of the embedding on optical spectra of coupled chromophores. In particular, the importance of including the full dynamic response in the embedding potential is demonstrated.

  9. Real-Time Chemical Imaging of Bacterial Biofilm Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection Radiation ProtectionRaising fundsReal PropertyReal-Time

  10. Real-time Pricing Demand Response in Operations

    SciTech Connect (OSTI)

    Widergren, Steven E.; Marinovici, Maria C.; Berliner, Teri; Graves, Alan

    2012-07-26T23:59:59.000Z

    AbstractDynamic pricing schemes have been implemented in commercial and industrial application settings, and recently they are getting attention for application to residential customers. Time-of-use and critical-peak-pricing rates are in place in various regions and are being piloted in many more. These programs are proving themselves useful for balancing energy during peak periods; however, real-time (5 minute) pricing signals combined with automation in end-use systems have the potential to deliver even more benefits to operators and consumers. Besides system peak shaving, a real-time pricing system can contribute demand response based on the locational marginal price of electricity, reduce load in response to a generator outage, and respond to local distribution system capacity limiting situations. The US Department of Energy (DOE) is teaming with a mid-west electricity service provider to run a distribution feeder-based retail electricity market that negotiates with residential automation equipment and clears every 5 minutes, thus providing a signal for lowering or raising electric consumption based on operational objectives of economic efficiency and reliability. This paper outlines the capability of the real-time pricing system and the operational scenarios being tested as the system is rolled-out starting in the first half of 2012.

  11. Real time 3D and heterogeneous data fusion

    SciTech Connect (OSTI)

    Little, C.Q.; Small, D.E.

    1998-03-01T23:59:59.000Z

    This project visualizes characterization data in a 3D setting, in real time. Real time in this sense means collecting the data and presenting it before it delays the user, and processing faster than the acquisition systems so no bottlenecks occur. The goals have been to build a volumetric viewer to display 3D data, demonstrate projecting other data, such as images, onto the 3D data, and display both the 3D and projected images as fast as the data became available. The authors have examined several ways to display 3D surface data. The most effective was generating polygonal surface meshes. They have created surface maps form a continuous stream of 3D range data, fused image data onto the geometry, and displayed the data with a standard 3D rendering package. In parallel with this, they have developed a method to project real-time images onto the surface created. A key component is mapping the data on the correct surfaces, which requires a-priori positional information along with accurate calibration of the camera and lens system.

  12. Real-Time Bid Optimization for Group-Buying Ads

    E-Print Network [OSTI]

    Balakrishnan, Raju

    2012-01-01T23:59:59.000Z

    Group-buying ads seeking a minimum number of customers before the deal expiry are increasingly used by the daily-deal providers. Unlike the traditional web ads, the advertiser's profits for group-buying ads depends on the time to expiry and additional customers needed to satisfy the minimum group size. Since both these quantities are time-dependent, optimal bid amounts to maximize profits change with every impression. Consequently, traditional static bidding strategies are far from optimal. Instead, bid values need to be optimized in real-time to maximize expected bidder profits. This online optimization of deal profits is made possible by the advent of ad exchanges offering real-time (spot) bidding. To this end, we propose a real-time bidding strategy for group-buying deals based on the online optimization of bid values. We derive the expected bidder profit of deals as a function of the bid amounts, and dynamically vary bids to maximize profits. Further, to satisfy time constraints of the online bidding, we ...

  13. Managing high-bandwidth real-time data storage

    SciTech Connect (OSTI)

    Bigelow, David D. [Los Alamos National Laboratory; Brandt, Scott A [Los Alamos National Laboratory; Bent, John M [Los Alamos National Laboratory; Chen, Hsing-Bung [Los Alamos National Laboratory

    2009-09-23T23:59:59.000Z

    There exist certain systems which generate real-time data at high bandwidth, but do not necessarily require the long-term retention of that data in normal conditions. In some cases, the data may not actually be useful, and in others, there may be too much data to permanently retain in long-term storage whether it is useful or not. However, certain portions of the data may be identified as being vitally important from time to time, and must therefore be retained for further analysis or permanent storage without interrupting the ongoing collection of new data. We have developed a system, Mahanaxar, intended to address this problem. It provides quality of service guarantees for incoming real-time data streams and simultaneous access to already-recorded data on a best-effort basis utilizing any spare bandwidth. It has built in mechanisms for reliability and indexing, can scale upwards to meet increasing bandwidth requirements, and handles both small and large data elements equally well. We will show that a prototype version of this system provides better performance than a flat file (traditional filesystem) based version, particularly with regard to quality of service guarantees and hard real-time requirements.

  14. Imaging gene expression in real-time using aptamers

    SciTech Connect (OSTI)

    Shin, Il Chung [Ames Laboratory

    2012-11-02T23:59:59.000Z

    Signal transduction pathways are usually activated by external stimuli and are transient. The downstream changes such as transcription of the activated genes are also transient. Real-time detection of promoter activity is useful for understanding changes in gene expression, especially during cell differentiation and in development. A simple and reliable method for viewing gene expression in real time is not yet available. Reporter proteins such as fluorescent proteins and luciferase allow for non-invasive detection of the products of gene expression in living cells. However, current reporter systems do not provide for real-time imaging of promoter activity in living cells. This is because of the long time period after transcription required for fluorescent protein synthesis and maturation. We have developed an RNA reporter system for imaging in real-time to detect changes in promoter activity as they occur. The RNA reporter uses strings of RNA aptamers that constitute IMAGEtags (Intracellular MultiAptamer GEnetic tags), which can be expressed from a promoter of choice. The tobramycin, neomycin and PDC RNA aptamers have been utilized for this system and expressed in yeast from the GAL1 promoter. The IMAGEtag RNA kinetics were quantified by RT-qPCR. In yeast precultured in raffinose containing media the GAL1 promoter responded faster than in yeast precultured in glucose containing media. IMAGEtag RNA has relatively short half-life (5.5 min) in yeast. For imaging, the yeast cells are incubated with their ligands that are labeled with fluorescent dyes. To increase signal to noise, ligands have been separately conjugated with the FRET (Frster resonance energy transfer) pairs, Cy3 and Cy5. With these constructs, the transcribed aptamers can be imaged after activation of the promoter by galactose. FRET was confirmed with three different approaches, which were sensitized emission, acceptor photobleaching and donor lifetime by FLIM (fluorescence lifetime imaging microscopy). Real-time transcription was measured by FLIM-FRET, which was detected by the decrease in donor lifetime resulting from ligand binding to IMAGEtags that were newly synthesized from the activated GAL1 promoter. The FRET signal was specific for transcribed IMAGEtags.

  15. Imaging gene expression in real-time using aptamers

    SciTech Connect (OSTI)

    Shin, Il Chung

    2011-12-13T23:59:59.000Z

    Signal transduction pathways are usually activated by external stimuli and are transient. The downstream changes such as transcription of the activated genes are also transient. Real-time detection of promoter activity is useful for understanding changes in gene expression, especially during cell differentiation and in development. A simple and reliable method for viewing gene expression in real time is not yet available. Reporter proteins such as fluorescent proteins and luciferase allow for non-invasive detection of the products of gene expression in living cells. However, current reporter systems do not provide for real-time imaging of promoter activity in living cells. This is because of the long time period after transcription required for fluorescent protein synthesis and maturation. We have developed an RNA reporter system for imaging in real-time to detect changes in promoter activity as they occur. The RNA reporter uses strings of RNA aptamers that constitute IMAGEtags (Intracellular MultiAptamer GEnetic tags), which can be expressed from a promoter of choice. The tobramycin, neomycin and PDC RNA aptamers have been utilized for this system and expressed in yeast from the GAL1 promoter. The IMAGEtag RNA kinetics were quantified by RT-qPCR. In yeast precultured in raffinose containing media the GAL1 promoter responded faster than in yeast precultured in glucose containing media. IMAGEtag RNA has relatively short half-life (5.5 min) in yeast. For imaging, the yeast cells are incubated with their ligands that are labeled with fluorescent dyes. To increase signal to noise, ligands have been separately conjugated with the FRET (Frster resonance energy transfer) pairs, Cy3 and Cy5. With these constructs, the transcribed aptamers can be imaged after activation of the promoter by galactose. FRET was confirmed with three different approaches, which were sensitized emission, acceptor photobleaching and donor lifetime by FLIM (fluorescence lifetime imaging microscopy). Real-time transcription was measured by FLIM-FRET, which was detected by the decrease in donor lifetime resulting from ligand binding to IMAGEtags that were newly synthesized from the activated GAL1 promoter. The FRET signal was specific for transcribed IMAGEtags.

  16. Real-time plasma control in a dual-frequency, confined plasma etcher

    SciTech Connect (OSTI)

    Milosavljevic, V. [PRL, School of Physics and NCPST, Dublin City University, Dublin 9 (Ireland); Faculty of Physics, University of Belgrade, P.O.B. 368, Belgrade (Serbia); Ellingboe, A. R.; Gaman, C. [PRL, School of Physics and NCPST, Dublin City University, Dublin 9 (Ireland); Ringwood, J. V. [Department of Electronic Engineering, NUI Maynooth, Maynooth, Co., Kildare (Ireland)

    2008-04-15T23:59:59.000Z

    The physics issues of developing model-based control of plasma etching are presented. A novel methodology for incorporating real-time model-based control of plasma processing systems is developed. The methodology is developed for control of two dependent variables (ion flux and chemical densities) by two independent controls (27 MHz power and O{sub 2} flow). A phenomenological physics model of the nonlinear coupling between the independent controls and the dependent variables of the plasma is presented. By using a design of experiment, the functional dependencies of the response surface are determined. In conjunction with the physical model, the dependencies are used to deconvolve the sensor signals onto the control inputs, allowing compensation of the interaction between control paths. The compensated sensor signals and compensated set-points are then used as inputs to proportional-integral-derivative controllers to adjust radio frequency power and oxygen flow to yield the desired ion flux and chemical density. To illustrate the methodology, model-based real-time control is realized in a commercial semiconductor dielectric etch chamber. The two radio frequency symmetric diode operates with typical commercial fluorocarbon feed-gas mixtures (Ar/O{sub 2}/C{sub 4}F{sub 8}). Key parameters for dielectric etching are known to include ion flux to the surface and surface flux of oxygen containing species. Control is demonstrated using diagnostics of electrode-surface ion current, and chemical densities of O, O{sub 2}, and CO measured by optical emission spectrometry and/or mass spectrometry. Using our model-based real-time control, the set-point tracking accuracy to changes in chemical species density and ion flux is enhanced.

  17. Telerobotic system concept for real-time soft-tissue imaging during radiotherapy beam delivery

    SciTech Connect (OSTI)

    Schlosser, Jeffrey; Salisbury, Kenneth; Hristov, Dimitre [Department of Mechanical Engineering, Stanford University, Stanford, California 94305 (United States); Department of Computer Science and Department of Surgery, Stanford University, Stanford, California 94305 (United States); Department of Radiation Oncology, Stanford University, Stanford, California 94305 (United States)

    2010-12-15T23:59:59.000Z

    Purpose: The curative potential of external beam radiation therapy is critically dependent on having the ability to accurately aim radiation beams at intended targets while avoiding surrounding healthy tissues. However, existing technologies are incapable of real-time, volumetric, soft-tissue imaging during radiation beam delivery, when accurate target tracking is most critical. The authors address this challenge in the development and evaluation of a novel, minimally interfering, telerobotic ultrasound (U.S.) imaging system that can be integrated with existing medical linear accelerators (LINACs) for therapy guidance. Methods: A customized human-safe robotic manipulator was designed and built to control the pressure and pitch of an abdominal U.S. transducer while avoiding LINAC gantry collisions. A haptic device was integrated to remotely control the robotic manipulator motion and U.S. image acquisition outside the LINAC room. The ability of the system to continuously maintain high quality prostate images was evaluated in volunteers over extended time periods. Treatment feasibility was assessed by comparing a clinically deployed prostate treatment plan to an alternative plan in which beam directions were restricted to sectors that did not interfere with the transabdominal U.S. transducer. To demonstrate imaging capability concurrent with delivery, robot performance and U.S. target tracking in a phantom were tested with a 15 MV radiation beam active. Results: Remote image acquisition and maintenance of image quality with the haptic interface was successfully demonstrated over 10 min periods in representative treatment setups of volunteers. Furthermore, the robot's ability to maintain a constant probe force and desired pitch angle was unaffected by the LINAC beam. For a representative prostate patient, the dose-volume histogram (DVH) for a plan with restricted sectors remained virtually identical to the DVH of a clinically deployed plan. With reduced margins, as would be enabled by real-time imaging, gross tumor volume coverage was identical while notable reductions of bladder and rectal volumes exposed to large doses were possible. The quality of U.S. images obtained during beam operation was not appreciably degraded by radiofrequency interference and 2D tracking of a phantom object in U.S. images obtained with the beam on/off yielded no significant differences. Conclusions: Remotely controlled robotic U.S. imaging is feasible in the radiotherapy environment and for the first time may offer real-time volumetric soft-tissue guidance concurrent with radiotherapy delivery.

  18. Real-time detection method and system for identifying individual aerosol particles

    DOE Patents [OSTI]

    Gard, Eric E. (San Francisco, CA); Coffee, Keith R. (Patterson, CA); Frank, Matthias (Oakland, CA); Tobias, Herbert J. (Kensington, CA); Fergenson, David P. (Alamo, CA); Madden, Norm (Livermore, CA); Riot, Vincent J. (Berkeley, CA); Steele, Paul T. (Livermore, CA); Woods, Bruce W. (Livermore, CA)

    2007-08-21T23:59:59.000Z

    An improved method and system of identifying individual aerosol particles in real time. Sample aerosol particles are collimated, tracked, and screened to determine which ones qualify for mass spectrometric analysis based on predetermined qualification or selection criteria. Screening techniques include one or more of determining particle size, shape, symmetry, and fluorescence. Only qualifying particles passing all screening criteria are subject to desorption/ionization and single particle mass spectrometry to produce corresponding test spectra, which is used to determine the identities of each of the qualifying aerosol particles by comparing the test spectra against predetermined spectra for known particle types. In this manner, activation cycling of a particle ablation laser of a single particle mass spectrometer is reduced.

  19. Near real time vapor detection and enhancement using aerosol adsorption

    DOE Patents [OSTI]

    Novick, V.J.; Johnson, S.A.

    1999-08-03T23:59:59.000Z

    A vapor sample detection method is described where the vapor sample contains vapor and ambient air and surrounding natural background particles. The vapor sample detection method includes the steps of generating a supply of aerosol that have a particular effective median particle size, mixing the aerosol with the vapor sample forming aerosol and adsorbed vapor suspended in an air stream, impacting the suspended aerosol and adsorbed vapor upon a reflecting element, alternatively directing infrared light to the impacted aerosol and adsorbed vapor, detecting and analyzing the alternatively directed infrared light in essentially real time using a spectrometer and a microcomputer and identifying the vapor sample. 13 figs.

  20. Near real time vapor detection and enhancement using aerosol adsorption

    DOE Patents [OSTI]

    Novick, Vincent J. (Downers Grove, IL); Johnson, Stanley A. (Countryside, IL)

    1999-01-01T23:59:59.000Z

    A vapor sample detection method where the vapor sample contains vapor and ambient air and surrounding natural background particles. The vapor sample detection method includes the steps of generating a supply of aerosol that have a particular effective median particle size, mixing the aerosol with the vapor sample forming aerosol and adsorbed vapor suspended in an air stream, impacting the suspended aerosol and adsorbed vapor upon a reflecting element, alternatively directing infrared light to the impacted aerosol and adsorbed vapor, detecting and analyzing the alternatively directed infrared light in essentially real time using a spectrometer and a microcomputer and identifying the vapor sample.

  1. Continuous real-time measurement of aqueous cyanide

    DOE Patents [OSTI]

    Rosentreter, Jeffrey J.; Gering, Kevin L.

    2007-03-06T23:59:59.000Z

    This invention provides a method and system capable of the continuous, real-time measurement of low concentrations of aqueous free cyanide (CN) using an on-line, flow through system. The system is based on the selective reactivity of cyanide anions and the characteristically nonreactive nature of metallic gold films, wherein this selective reactivity is exploited as an indirect measurement for aqueous cyanide. In the present invention the dissolution of gold, due to the solubilization reaction with the analyte cyanide anion, is monitored using a piezoelectric microbalance contained within a flow cell.

  2. LHCb's Real-Time Alignment in Run2

    E-Print Network [OSTI]

    Batozskaya, Varvara

    2015-01-01T23:59:59.000Z

    Stable, precise spatial alignment and PID calibration are necessary to achieve optimal detector performances. During Run2, LHCb will have a new real-time detector alignment and calibration to reach equivalent performances in the online and offline reconstruction. This offers the opportunity to optimise the event selection by applying stronger constraints as well as hadronic particle identification at the trigger level. The required computing time constraints are met thanks to a new dedicated framework using the multi-core farm infrastructure for the trigger.

  3. Supernova Legacy Survey (SNLS) : real time operations and photometric analysis

    E-Print Network [OSTI]

    N. Palanque-Delabrouille; for the SNLS collaboration

    2005-09-15T23:59:59.000Z

    Type Ia supernovae (SN Ia) have provided the first evidence for an accelerating universe and for the existence of an unknown ``dark energy'' driving this expansion. The 5-year Supernova Legacy Survey (SNLS) will deliver \\~700 type Ia supernovae and as many type II supernovae with well-sampled light curves in 4 filters g', r', i' and z'. The current status of the project will be presented, along with the real time processing leading to the discovery and spectroscopic observation of the supernovae. We also present an offline selection of the SN candidates which aims at identifying and eliminating potential selection biases.

  4. Real-Time Chemical Imaging of Bacterial Biofilm Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)IntegratedSpeedingTechnicalPurchase,Reaction-Driven RestructuringReal-Time Chemical

  5. Real-Time Chemical Imaging of Bacterial Biofilm Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)IntegratedSpeedingTechnicalPurchase,Reaction-Driven RestructuringReal-Time

  6. Real Time Diagnostics for Algae-final-sm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection Radiation ProtectionRaising fundsReal Property ManagementReal-time

  7. Real-Time Airborne Particle Analyzer - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection Radiation ProtectionRaising fundsReal Property ManagementReal-time

  8. Real-Time Chemical Imaging of Bacterial Biofilm Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection Radiation ProtectionRaising fundsReal PropertyReal-Time Chemical

  9. Initial Studies Toward Real-Time Transmission Path Rating

    SciTech Connect (OSTI)

    Singh, Ruchi; Diao, Ruisheng; Cai, Niannian; Huang, Zhenyu; Tuck, Brian; Guo, Xinxin

    2012-07-26T23:59:59.000Z

    Demand continues to increase while transmission line construction is being constrained by multiple factors economic, environmental, and political. Effective and efficient utilization of transmission lines is thus of great importance in an open access environment. Large blocks of power are transferred from areas with inexpensive generation to heavy load demand areas or areas with high generation costs. This results in some transmission paths being loaded closer to their path ratings, which limits further power transfer between areas. Traditionally, rating of important paths was determined off line by assuming the worst-case study scenario; once determined, it could be used for years. With increasing uncertainty arising from rapid growth of renewable energy and smart technologies, path rating studies are needed in near-real time to account for the latest system status and support a reliable and economic power grid. This paper adopts a simplified procedure based on standards of the North American Electric Reliability Corporation (NERC) to determine total transfer capability (TTC) or transfer limit for the purpose of demonstrating the benefits and necessity of real-time path rating. Initial studies are conducted to compute TTC of a two-area test system and a 39-bus test system. Results indicate that path rating can be significantly affected by loading conditions, generator schedules, system topology and other factors.

  10. REAL TIME ULTRASONIC ALUMINUM SPOT WELD MONITORING SYSTEM

    SciTech Connect (OSTI)

    Regalado, W. Perez; Chertov, A. M.; Maev, R. Gr. [Institute for Diagnostic Imaging Research, Physics Department, University of Windsor, 292 Essex Hall, 401 Sunset Ave. N9B 3P4 Windsor, Ontario (Canada)

    2010-02-22T23:59:59.000Z

    Aluminum alloys pose several properties that make them one of the most popular engineering materials: they have excellent corrosion resistance, and high weight-to-strength ratio. Resistance spot welding of aluminum alloys is widely used today but oxide film and aluminum thermal and electrical properties make spot welding a difficult task. Electrode degradation due to pitting, alloying and mushrooming decreases the weld quality and adjustment of parameters like current and force is required. To realize these adjustments and ensure weld quality, a tool to measure weld quality in real time is required. In this paper, a real time ultrasonic non-destructive evaluation system for aluminum spot welds is presented. The system is able to monitor nugget growth while the spot weld is being made. This is achieved by interpreting the echoes of an ultrasound transducer located in one of the welding electrodes. The transducer receives and transmits an ultrasound signal at different times during the welding cycle. Valuable information of the weld quality is embedded in this signal. The system is able to determine the weld nugget diameter by measuring the delays of the ultrasound signals received during the complete welding cycle. The article presents the system performance on aluminum alloy AA6022.

  11. Real-time individualized training vectors for experiential learning.

    SciTech Connect (OSTI)

    Willis, Matt; Tucker, Eilish Marie; Raybourn, Elaine Marie; Glickman, Matthew R.; Fabian, Nathan

    2011-01-01T23:59:59.000Z

    Military training utilizing serious games or virtual worlds potentially generate data that can be mined to better understand how trainees learn in experiential exercises. Few data mining approaches for deployed military training games exist. Opportunities exist to collect and analyze these data, as well as to construct a full-history learner model. Outcomes discussed in the present document include results from a quasi-experimental research study on military game-based experiential learning, the deployment of an online game for training evidence collection, and results from a proof-of-concept pilot study on the development of individualized training vectors. This Lab Directed Research & Development (LDRD) project leveraged products within projects, such as Titan (Network Grand Challenge), Real-Time Feedback and Evaluation System, (America's Army Adaptive Thinking and Leadership, DARWARS Ambush! NK), and Dynamic Bayesian Networks to investigate whether machine learning capabilities could perform real-time, in-game similarity vectors of learner performance, toward adaptation of content delivery, and quantitative measurement of experiential learning.

  12. On the stability of wholesale electricity markets under real-time pricing

    E-Print Network [OSTI]

    Roozbehani, Mardavij

    The paper proposes a mathematical model for the dynamic evolution of supply, demand, and clearing prices under a class of real-time pricing mechanisms characterized by passing on the real-time wholesale prices to the end ...

  13. High-Energy, Pulsed-Laser Diagnostics for Real-Time Measurements...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    High-Energy, Pulsed-Laser Diagnostics for Real-Time Measurements of Reciprocating Engine PM Emissions High-Energy, Pulsed-Laser Diagnostics for Real-Time Measurements of...

  14. Implementation issues for real-time optimization of a crude unit heat exchanger network

    E-Print Network [OSTI]

    Skogestad, Sigurd

    1 Implementation issues for real-time optimization of a crude unit heat exchanger network Tore Lid of real time optimization results in a crude unit heat exchanger network. Two different control strategies

  15. Is there a source of help for setting up real time wind turbine...

    Open Energy Info (EERE)

    there a source of help for setting up real time wind turbine data reporting ? Home I'd like our students to be able to see historical data as well as real time power generation at...

  16. Real-Time Building Energy Simulation Using EnergyPlus and the Building Controls Test Bed

    E-Print Network [OSTI]

    Pang, Xiufeng

    2013-01-01T23:59:59.000Z

    Figure 9 Lighting electric power comparison between real-measurement Lighting Electric Power Comparison kW real-time

  17. Deliberation Scheduling for Planning in Real-Time David J. Musliner

    E-Print Network [OSTI]

    Krebsbach, Kurt D.

    Deliberation Scheduling for Planning in Real-Time David J. Musliner Honeywell Laboratories david.musliner@honeywell

  18. Real-time calibration of a feedback trap

    SciTech Connect (OSTI)

    Gavrilov, Mom?ilo; Jun, Yonggun; Bechhoefer, John, E-mail: johnb@sfu.ca [Department of Physics, Simon Fraser University, Burnaby, British Columbia V5A 1S6 (Canada)

    2014-09-15T23:59:59.000Z

    Feedback traps use closed-loop control to trap or manipulate small particles and molecules in solution. They have been applied to the measurement of physical and chemical properties of particles and to explore fundamental questions in the non-equilibrium statistical mechanics of small systems. These applications have been hampered by drifts in the electric forces used to manipulate the particles. Although the drifts are small for measurements on the order of seconds, they dominate on time scales of minutes or slower. Here, we show that a recursive maximum likelihood (RML) algorithm can allow real-time measurement and control of electric and stochastic forces over time scales of hours. Simulations show that the RML algorithm recovers known parameters accurately. Experimental estimates of diffusion coefficients are also consistent with expected physical properties.

  19. Method and apparatus for real time weld monitoring

    DOE Patents [OSTI]

    Leong, Keng H. (Lemont, IL); Hunter, Boyd V. (Bolingbrook, IL)

    1997-01-01T23:59:59.000Z

    An improved method and apparatus are provided for real time weld monitoring. An infrared signature emitted by a hot weld surface during welding is detected and this signature is compared with an infrared signature emitted by the weld surface during steady state conditions. The result is correlated with weld penetration. The signal processing is simpler than for either UV or acoustic techniques. Changes in the weld process, such as changes in the transmitted laser beam power, quality or positioning of the laser beam, change the resulting weld surface features and temperature of the weld surface, thereby resulting in a change in the direction and amount of infrared emissions. This change in emissions is monitored by an IR sensitive detecting apparatus that is sensitive to the appropriate wavelength region for the hot weld surface.

  20. Infrared luminescence for real time ionizing radiation detection

    SciTech Connect (OSTI)

    Veronese, Ivan, E-mail: ivan.veronese@unimi.it; Mattia, Cristina De; Cantone, Marie Claire [Dipartimento di Fisica, Universit degli Studi di Milano, Via Celoria 16, 20133 Milano (Italy); Fasoli, Mauro; Chiodini, Norberto; Vedda, Anna [Dipartimento di Scienza dei Materiali, Universit degli Studi di Milano-Bicocca, Via Cozzi 55, 20125 Milano (Italy); Mones, Eleonora [Medical Physics Department, Azienda Ospedaliera Maggiore della Carit, Corso Mazzini 18, 28100 Novara (Italy)

    2014-08-11T23:59:59.000Z

    Radio-luminescence (RL) optical fiber sensors enable a remote, punctual, and real time detection of ionizing radiation. However, the employment of such systems for monitoring extended radiation fields with energies above the Cerenkov threshold is still challenging, since a spurious luminescence, namely, the stem effect, is also generated in the passive fiber portion exposed to radiation. Here, we present experimental measurements on Yb-doped silica optical fibers irradiated with photon fields of different energies and sizes. The results demonstrate that the RL of Yb{sup 3+}, displaying a sharp emission line at about 975?nm, is free from any spectral superposition with the spurious luminescence. This aspect, in addition with the suitable linearity, reproducibility, and sensitivity properties of the Yb-doped fibers, paves the way to their use in applications where an efficient stem effect removal is required.

  1. Real-time neural network earthquake profile predictor

    DOE Patents [OSTI]

    Leach, Richard R. (Castro Valley, CA); Dowla, Farid U. (Castro Valley, CA)

    1996-01-01T23:59:59.000Z

    A neural network has been developed that uses first-arrival energy to predict the characteristics of impending earthquake seismograph signals. The propagation of ground motion energy through the earth is a highly nonlinear function. This is due to different forms of ground motion as well as to changes in the elastic properties of the media throughout the propagation path. The neural network is trained using seismogram data from earthquakes. Presented with a previously unseen earthquake, the neural network produces a profile of the complete earthquake signal using data from the first seconds of the signal. This offers a significant advance in the real-time monitoring, warning, and subsequent hazard minimization of catastrophic ground motion.

  2. Real time evaluation of overranging in helical computed tomography

    E-Print Network [OSTI]

    Trevisan, Diego; Ravanelli, Daniele; Valentini, Aldo

    2014-01-01T23:59:59.000Z

    Overranging or overscanning increases the dose delivered to patients undergoing helical Computed Tomography examinations. In order to reduce it, nowadays most of the multidetector tomographs close the X-ray beam aperture at the scan extremes. This technical innovation, usually referred to as dynamic or adaptive collimation, also influences the overranging assessment methods. In particular, the film free approach proposed in previous studies is not suitable for these modern tomographs. The present study aims to introduce a new method of estimating overranging with real time dosimetry, even suitable for tomographs equipped with adaptive collimation. The approach proposed is very easy to implement and time saving because only a pencil chamber is required. It is also equivalent in precision and in accuracy to the film based one, considered an absolute benchmark.

  3. Real-time neural network earthquake profile predictor

    DOE Patents [OSTI]

    Leach, R.R.; Dowla, F.U.

    1996-02-06T23:59:59.000Z

    A neural network has been developed that uses first-arrival energy to predict the characteristics of impending earthquake seismograph signals. The propagation of ground motion energy through the earth is a highly nonlinear function. This is due to different forms of ground motion as well as to changes in the elastic properties of the media throughout the propagation path. The neural network is trained using seismogram data from earthquakes. Presented with a previously unseen earthquake, the neural network produces a profile of the complete earthquake signal using data from the first seconds of the signal. This offers a significant advance in the real-time monitoring, warning, and subsequent hazard minimization of catastrophic ground motion. 17 figs.

  4. ON THE DEVELOPMENT OF A REAL-TIME SIMULATOR ENGINE FOR A HYDRAULIC FORESTRY MACHINE

    E-Print Network [OSTI]

    Papadopoulos, Evangelos

    1 ON THE DEVELOPMENT OF A REAL-TIME SIMULATOR ENGINE FOR A HYDRAULIC FORESTRY MACHINE Evangelos@central.ntua.gr Abstract This work focuses on the development of a real-time training simulator engine for a forestry simulator, hydraulic dynamics, numerical stiffness, real-time, control system 1 Introduction Forestry

  5. Department of Computer Science & Engineering Scheduling Design and Verification for Open Soft Real-time Systems

    E-Print Network [OSTI]

    Smart, William

    Soft Real-time Systems Authors: Robert Glaubius, Terry Tidwell,William D. Smart, and Christopher Gill and verification approach for open soft real-time systems, that can use different decision models, e.g., a Markov of scheduling policies for open soft real-time systems. #12;Scheduling Design and Verification for Open Soft

  6. International Workshop on Analysis Tools and Methodologies for Embedded and Real-time

    E-Print Network [OSTI]

    Lipari, Giuseppe

    1st International Workshop on Analysis Tools and Methodologies for Embedded and Real-time Systems application areas, from Real- Time Operating Systems to distributed systems, from safety critical to soft real of the International Workshop on Anaysis Tools and Methodologies for Embedded and Real-time Systems (WATERS

  7. Modeling Decentralized Real-Time Control by State Space Partition of Timed Thanikesavan Sivanthi, Srivas Chennu

    E-Print Network [OSTI]

    Kent, University of

    are driving modern real-time control systems from centralized to decentralized architec- tures for the validation and verification of real- time control systems. This paper introduces an algorith- mic methodology to translate the state space visualization of a centralized real-time control system to a decentralized one

  8. Kalman Filter in the Real Time URBIS model Date June 2010

    E-Print Network [OSTI]

    Vuik, Kees

    2010-06-03 Kalman Filter in the Real Time URBIS model Date June 2010 Author(s) R. Kranenburg Keywords NOx, Real Time URBIS, Uncertainty, Rijnmond, Kalman filter, Screening process Target Master Thesis Analysis of the uncertainty of the Real Time URBIS model with a Kalman filter 7 1 Introduction 9 2 Model

  9. A Multimedia Server on the Spring RealTime System 1

    E-Print Network [OSTI]

    Shenoy, Prashant

    A Multimedia Server on the Spring RealTime System 1 Hiroyuki Kaneko, John A. Stankovic Department of both traditional realtime control processing and multimedia processing has enormous potentialtime computation and less determin istic multimedia soft realtime computation. In this paper, we propose

  10. SIG Technology Review Summer 1994 57 Real-Time Navigation Using the Global Positioning System

    E-Print Network [OSTI]

    Simon, Dan

    SIG Technology Review · Summer 1994 57 Real-Time Navigation Using the Global Positioning System Real-Time Navigation Using the Global Positioning System Dan Simon and Hossny El-Sherief, TRW Ballistic Technology Review · Summer 1994 Real-Time Navigation Using the Global Positioning System introduces errors

  11. Real-time system verification techniques based on abstraction/deduction and model checking

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    Real-time system verification techniques based on abstraction/deduction and model checking Eun in or- der to obtain a powerful and highly automatic verification environment for real-time systems. One-Young.Kang@loria.fr Abstract. Our research focuses on verification techniques for real-time systems based on predicate

  12. Cost Optimal Operation of Thermal Energy Storage System with Real-Time Prices

    E-Print Network [OSTI]

    Cost Optimal Operation of Thermal Energy Storage System with Real-Time Prices Toru Kashima, Member of the result [4]. The same can be said for time varying real-time prices. Real-time energy pricing is not yet such as chillers. Energy resources such as electricity or natural gas are bought from suppliers at certain prices

  13. Real-time Lighting System for Large Group Interaction Joshua Randall

    E-Print Network [OSTI]

    Real-time Lighting System for Large Group Interaction Joshua Randall Massachusetts Institute of Technology May 2002 Abstract Lighting systems have historically been controlled by an individual or small group of human operators working together in real-time. Applications for real-time lighting control

  14. STORM SURGE WARNING SERVICE

    E-Print Network [OSTI]

    Stoffelen, Ad

    warnings Early indication of storm surges 2 10 days before ECMWF Ensemble Prediction System 3-48 hrs1 STORM SURGE WARNING SERVICE SVSD by Jan Kroos Rijkswaterstaat / RIKZ #12;2 Overview Organisation Storm Surge Warning Service Allocation of tasks Authorities Process of Storm Surge Warning

  15. Real-time Information, Uncertainty and Quantum Feedback Control

    E-Print Network [OSTI]

    Bo Qi; Daoyi Dong; Chunlin Chen; Lijun Liu; Zairong Xi

    2014-09-10T23:59:59.000Z

    Feedback is the core concept in cybernetics and its effective use has made great success in but not limited to the fields of engineering, biology, and computer science. When feedback is used to quantum systems, two major types of feedback control protocols including coherent feedback control (CFC) and measurement-based feedback control (MFC) have been developed. In this paper, we compare the two types of quantum feedback control protocols by focusing on the real-time information used in the feedback loop and the capability in dealing with parameter uncertainty. An equivalent relationship is established between quantum CFC and non-selective quantum MFC in the form of operator-sum representation. Using several examples of quantum feedback control, we show that quantum MFC can theoretically achieve better performance than quantum CFC in stabilizing a quantum state and dealing with Hamiltonian parameter uncertainty. The results enrich understanding of the relative advantages between quantum MFC and quantum CFC, and can provide useful information in choosing suitable feedback protocols for quantum systems.

  16. Real-time multi-mode neutron multiplicity counter

    DOE Patents [OSTI]

    Rowland, Mark S; Alvarez, Raymond A

    2013-02-26T23:59:59.000Z

    Embodiments are directed to a digital data acquisition method that collects data regarding nuclear fission at high rates and performs real-time preprocessing of large volumes of data into directly useable forms for use in a system that performs non-destructive assaying of nuclear material and assemblies for mass and multiplication of special nuclear material (SNM). Pulses from a multi-detector array are fed in parallel to individual inputs that are tied to individual bits in a digital word. Data is collected by loading a word at the individual bit level in parallel, to reduce the latency associated with current shift-register systems. The word is read at regular intervals, all bits simultaneously, with no manipulation. The word is passed to a number of storage locations for subsequent processing, thereby removing the front-end problem of pulse pileup. The word is used simultaneously in several internal processing schemes that assemble the data in a number of more directly useable forms. The detector includes a multi-mode counter that executes a number of different count algorithms in parallel to determine different attributes of the count data.

  17. ROAMing terrain (Real-time Optimally Adapting Meshes)

    SciTech Connect (OSTI)

    Duchaineau, M.; Wolinsky, M.; Sigeti, D.E.; Miller, M.C.; Aldrich, C.; Mineev, M.

    1997-07-01T23:59:59.000Z

    Terrain visualization is a difficult problem for applications requiring accurate images of large datasets at high frame rates, such as flight simulation and ground-based aircraft testing using synthetic sensor stimulation. On current graphics hardware, the problem is to maintain dynamic, view-dependent triangle meshes and texture maps that produce good images at the required frame rate. We present an algorithm for constructing triangle meshes that optimizes flexible view-dependent error metrics, produces guaranteed error bounds, achieves specified triangle counts directly, and uses frame-to-frame coherence to operate at high frame rates for thousands of triangles per frame. Our method, dubbed Real-time Optimally Adapting Meshes (ROAM), uses two priority queues to drive split and merge operations that maintain continuous triangulations built from pre-processed bintree triangles. We introduce two additional performance optimizations: incremental triangle stripping and priority-computation deferral lists. ROAM execution time is proportionate to the number of triangle changes per frame, which is typically a few percent of the output mesh size, hence ROAM performance is insensitive to the resolution and extent of the input terrain. Dynamic terrain and simple vertex morphing are supported.

  18. Real-time algorithm for robust coincidence search

    SciTech Connect (OSTI)

    Petrovic, T.; Vencelj, M.; Lipoglavsek, M.; Gajevic, J.; Pelicon, P. [Jozef Stefan Institute, Jamova cesta 39, Ljubljana, Slovenia and Cosylab d.d., Control System Laboratory, Teslova ulica 30, Ljubljana (Slovenia); Jozef Stefan Institute, Jamova cesta 39, Ljubljana (Slovenia)

    2012-10-20T23:59:59.000Z

    In in-beam {gamma}-ray spectroscopy experiments, we often look for coincident detection events. Among every N events detected, coincidence search is naively of principal complexity O(N{sup 2}). When we limit the approximate width of the coincidence search window, the complexity can be reduced to O(N), permitting the implementation of the algorithm into real-time measurements, carried out indefinitely. We have built an algorithm to find simultaneous events between two detection channels. The algorithm was tested in an experiment where coincidences between X and {gamma} rays detected in two HPGe detectors were observed in the decay of {sup 61}Cu. Functioning of the algorithm was validated by comparing calculated experimental branching ratio for EC decay and theoretical calculation for 3 selected {gamma}-ray energies for {sup 61}Cu decay. Our research opened a question on the validity of the adopted value of total angular momentum of the 656 keV state (J{sup {pi}} = 1/2{sup -}) in {sup 61}Ni.

  19. Real time detection and correction of distribution feeder operational problems

    SciTech Connect (OSTI)

    Subramanian, A.K.; Huang, J.C.

    1995-12-31T23:59:59.000Z

    The paper presents a new technique that detects and corrects distribution operational problems using closed loop control of substation transformers, capacitors and reactors by an online computer. This allows the distribution system to be operated close to its capacity without sacrificing the quality of power supply. Such operations help defer the additional cost of installing new substations. The technique integrates the Distribution Feeder Analysis (DFA) and the Distribution Substation Control (DSC) functions to achieve this. The DFA function provides the topology and power flow results for the feeders using the substation real time measurements. It does not require feeder section measurements. The realtime feeder results are used in detecting any currently existing feeder operational problems such as feeder section voltages and currents outside their limits. The detected feeder problems are transformed into substation distribution bus objectives and then corrected by the DSC function using controls available at the substation. The DSC function has been performing successfully for several years at Potomac Electric Power Company (PEPCO) in Washington, D.C. It uses a closed loop control scheme that controls the substation transformer taps and shunt capacitor and reactor breakers and optimizes the substation operation. By combining the DFA and DSC functions into a single function and with proper transformation of feeder problems into substation objectives, a new closed loop control scheme for the substation controls is achieved. This scheme corrects the detected feeder problems and optimizes the substation operation. This technique is implemented and tested using the actual substation and feeder models of PEPCO.

  20. Mining, Modeling, and Analyzing Real-Time Social Trails

    E-Print Network [OSTI]

    Kamath, Krishna Y

    2013-05-28T23:59:59.000Z

    0 A B C D A B C D A B C D A B C D A B C D - bp, gulf, oil, fed - walcott, capello - gulf, oil, spill - bp, protest, environment - bp, carem top, kill - deep, water, bp, weekend Figure 2.1: Example of crowd discovery and tracking...

  1. Concept Paper for Real-Time Temperature and Water Quality Management for San Joaquin River Riparian Habitat Restoration

    E-Print Network [OSTI]

    Quinn, Nigel W.T.

    2004-01-01T23:59:59.000Z

    Report. Real-time Water Quality Management for SJR RiparianReal-time Water Quality Management for SJR Riparian HabitatPaper Real-time Water Quality Management for SJR Riparian

  2. Quasi real time in vivo dosimetry for VMAT

    SciTech Connect (OSTI)

    Fidanzio, A.; Azario, L. [Istituto di Fisica, Universit Cattolica del Sacro Cuore, Rome 00168 (Italy) [Istituto di Fisica, Universit Cattolica del Sacro Cuore, Rome 00168 (Italy); U.O.C di Fisica Sanitaria, Universit Cattolica del Sacro Cuore, Rome 00168 (Italy); Istituto Nazionale di Fisica Nucleare (INFN), Sezione di Roma Tre, Rome 00146 (Italy); Porcelli, A. [U.O.C di Fisica Sanitaria, Universit Cattolica del Sacro Cuore, Rome 00168 (Italy)] [U.O.C di Fisica Sanitaria, Universit Cattolica del Sacro Cuore, Rome 00168 (Italy); Greco, F. [U.O.C di Fisica Sanitaria, Universit Cattolica del Sacro Cuore, Rome 00168 (Italy) [U.O.C di Fisica Sanitaria, Universit Cattolica del Sacro Cuore, Rome 00168 (Italy); Istituto Nazionale di Fisica Nucleare (INFN), Sezione di Roma Tre, Rome 00146 (Italy); Cilla, S. [U.O di Fisica Sanitaria, Fondazione di Ricerca e Cura Giovanni Paolo II, Campobasso 86100, Italy and Istituto Nazionale di Fisica Nucleare (INFN), Sezione di Roma Tre, Rome 00146 (Italy)] [U.O di Fisica Sanitaria, Fondazione di Ricerca e Cura Giovanni Paolo II, Campobasso 86100, Italy and Istituto Nazionale di Fisica Nucleare (INFN), Sezione di Roma Tre, Rome 00146 (Italy); Grusio, M. [Istituto di Fisica, Universit Cattolica del Sacro Cuore, Rome 00168 (Italy)] [Istituto di Fisica, Universit Cattolica del Sacro Cuore, Rome 00168 (Italy); Balducci, M.; Valentini, V. [U.O.C di Radioterapia, Universit Cattolica del Sacro Cuore, Rome 00168 (Italy)] [U.O.C di Radioterapia, Universit Cattolica del Sacro Cuore, Rome 00168 (Italy); Piermattei, A., E-mail: a.piermattei@rm.unicatt.it [Istituto di Fisica, Universit Cattolica del Sacro Cuore, Rome 00168 (Italy); U.O.C di Fisica Sanitaria, Universit Cattolica del Sacro Cuore, Rome 00168 (Italy); Istituto Nazionale di Fisica Nucleare (INFN), Sezione di Roma Tre, Rome 00168 (Italy)

    2014-06-15T23:59:59.000Z

    Purpose: Results about the feasibility of a method for quasi real timein vivo dosimetry (IVD) at the isocenter point for volumetric modulated arc therapy (VMAT) are here reported. The method is based on correlations between the EPID signal and the dose on the beam central axis. Moreover, the ?-analysis of EPID images was adopted to verify off-axis reproducibility of fractionated plan delivery. Methods: An algorithm to reconstructin vivo the isocenter dose, D{sub iso}, for RapidArc treatments has been developed. 20 VMAT plans, optimized with two opposite arcs, for prostate, pancreas, and head treatments have been delivered by a Varian linac both to a conic PMMA phantom with elliptical section and to patients. The ratios R between reconstructed D{sub iso} and the planned doses were determined for phantom and patient irradiations adopting an acceptance criterion of 5%. In total, 40 phantom checks and 400 patient checks were analyzed. Moreover, 3% and 3 mm criteria were adopted for portal image ?-analysis to assess patient irradiation reproducibility. Results: The average ratio R, between reconstructed and planned doses for the PMMA phantom irradiations was equal to 1.007 0.024. When the IVD method was applied to the 20 patients, the average R ratio was equal to 1.003 0.017 and 96% of the tests were within the acceptance criteria. The portal image ?-analysis supplied 88% of the tests within the pass rates ?{sub mean} ? 0.4 and P{sub ?<1} ? 98%. All the warnings were understood comparing the CT and the cone beam CT images and in one case a patient's setup error was detected and corrected for the successive fractions. Conclusions: This preliminary experience suggests that the method is able to detect dosimetric errors in quasi real time at the end of the therapy session. The authors intend to extend this procedure to other pathologies with the integration of in-room imaging verification by cone beam CT.

  3. Real-Time SCADA Cyber Protection Using Compression Techniques

    SciTech Connect (OSTI)

    Lyle G. Roybal; Gordon H Rueff

    2013-11-01T23:59:59.000Z

    The Department of Energys Office of Electricity Delivery and Energy Reliability (DOE-OE) has a critical mission to secure the energy infrastructure from cyber attack. Through DOE-OEs Cybersecurity for Energy Delivery Systems (CEDS) program, the Idaho National Laboratory (INL) has developed a method to detect malicious traffic on Supervisory, Control, and Data Acquisition (SCADA) network using a data compression technique. SCADA network traffic is often repetitive with only minor differences between packets. Research performed at the INL showed that SCADA network traffic has traits desirable for using compression analysis to identify abnormal network traffic. An open source implementation of a Lempel-Ziv-Welch (LZW) lossless data compression algorithm was used to compress and analyze surrogate SCADA traffic. Infected SCADA traffic was found to have statistically significant differences in compression when compared against normal SCADA traffic at the packet level. The initial analyses and results are clearly able to identify malicious network traffic from normal traffic at the packet level with a very high confidence level across multiple ports and traffic streams. Statistical differentiation between infected and normal traffic level was possible using a modified data compression technique at the 99% probability level for all data analyzed. However, the conditions tested were rather limited in scope and need to be expanded into more realistic simulations of hacking events using techniques and approaches that are better representative of a real-world attack on a SCADA system. Nonetheless, the use of compression techniques to identify malicious traffic on SCADA networks in real time appears to have significant merit for infrastructure protection.

  4. Real Time Pricing and the Real Live Firm

    SciTech Connect (OSTI)

    Moezzi, Mithra; Goldman, Charles; Sezgen, Osman; Bharvirkar, Ranjit; Hopper, Nicole

    2004-05-26T23:59:59.000Z

    Energy economists have long argued the benefits of real time pricing (RTP) of electricity. Their basis for modeling customers response to short-term fluctuations in electricity prices are based on theories of rational firm behavior, where management strives to minimize operating costs and optimize profit, and labor, capital and energy are potential substitutes in the firm's production function. How well do private firms and public sector institutions operating conditions, knowledge structures, decision-making practices, and external relationships comport with these assumptions and how might this impact price response? We discuss these issues on the basis of interviews with 29 large (over 2 MW) industrial, commercial, and institutional customers in the Niagara Mohawk Power Corporation service territory that have faced day-ahead electricity market prices since 1998. We look at stories interviewees told about why and how they respond to RTP, why some customers report that they can't, and why even if they can, they don't. Some firms respond as theorized, and we describe their load curtailment strategies. About half of our interviewees reported that they were unable to either shift or forego electricity consumption even when prices are high ($0.50/kWh). Reasons customers gave for why they weren't price-responsive include implicit value placed on reliability, pricing structures, lack of flexibility in adjusting production inputs, just-in-time practices, perceived barriers to onsite generation, and insufficient time. We draw these observations into a framework that could help refine economic theory of dynamic pricing by providing real-world descriptions of how firms behave and why.

  5. Real-Time Camera Tracking and 3D Reconstruction Using Signed Distance Functions

    E-Print Network [OSTI]

    Lunds Universitet

    show that by representing the geometry with a signed distance function (SDF), the camera pose can be efficiently estimated by directly minimizing the error of the depth images on the SDF. As the SDF contains

  6. E-Print Network 3.0 - autonomous real-time tracking Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the data for future analysis ... Source: Kortenkamp, David - Texas Robotics and Automation Center Laboratories (TRACLabs) Collection: Engineering 5 Visual Servoing for...

  7. Real-time audiovisual speech capture and motion tracking for speech-driven facial animation

    E-Print Network [OSTI]

    Jablonski, Karl Adam

    2013-02-22T23:59:59.000Z

    the pupils of a human, was employed as the main video input device. The PupilCam is based on two sets of time multiplexed in&ared (IR) light emitting diodes (LED) and an analog, black and white, National Television Standards Committee (NTSC), Charge Couple...

  8. A Real-Time Face Tracking System Based On A Single PTZ Camera

    E-Print Network [OSTI]

    Lee, Seoktae

    2014-12-12T23:59:59.000Z

    participation and interaction between the students and the instructor. Nowadays, conventional systems commonly implement a combination of static and PTZ cameras. However, such systems are not only costly but also require operators and high computational power...

  9. Real Time Tracking of Borescope Tip Pose Ken Martin, Charles V. Stewart*

    E-Print Network [OSTI]

    . Electromagnetic fields are cor- rupted by the surrounding presence of metal. Acoustic techniques are susceptible-dimensional image coordi- nate system. It then matches each to the current borescope video image (without explicitly, or a small video camera located at the tip of the borescope and a video monitor at the other end. Borescopes

  10. Real-time audiovisual speech capture and motion tracking for speech-driven facial animation

    E-Print Network [OSTI]

    Jablonski, Karl Adam

    2013-02-22T23:59:59.000Z

    movements through speech patterns, they are limited by their storage requirements and high-priced equipment. Furthermore, the audiovisual processing can be delayed, taking place after the initial capture and transfer of all required audio and video...

  11. A Real-Time Face Tracking System Based On A Single PTZ Camera

    E-Print Network [OSTI]

    Lee, Seoktae

    2014-12-12T23:59:59.000Z

    participation and interaction between the students and the instructor. Nowadays, conventional systems commonly implement a combination of static and PTZ cameras. However, such systems are not only costly but also require operators and high computational power...

  12. A Multicore Processor based Real-Time System for Automobile management application

    E-Print Network [OSTI]

    M., Vaidehi

    2010-01-01T23:59:59.000Z

    In this paper we propose an Intelligent Management System which is capable of managing the automobile functions using the rigorous real-time principles and a multicore processor in order to realize higher efficiency and safety for the vehicle. It depicts how various automobile functionalities can be fine grained and treated to fit in real time concepts. It also shows how the modern multicore processors can be of good use in organizing vast amounts of correlated functions to be executed in real-time with excellent time commitments. The modeling of the automobile tasks with real time commitments, organizing appropriate scheduling for various real time tasks and the usage of a multicore processor enables the system to realize higher efficiency and offer better safety levels to the vehicle. The industry available real time operating system is used for scheduling various tasks and jobs on the multicore processor.

  13. Response time satisfaction in real-time knowledge-based systems

    E-Print Network [OSTI]

    Frank, Deborah Lee

    1990-01-01T23:59:59.000Z

    vehicles or plant operations. Planning systems have already been used extensively in robots and autonomous vehicles. However, integrating knowledge-based systems into real-time environments is difficult because they cannot always respond to external... [11]. There is a natural niche for expert systems and planning systems in real-time computing environments. A common application of expert systems, system diagnosis, can be integrated into many different real-time systems, such as autonomous...

  14. A non-blocking buffer mechanism for real-time event message communication

    E-Print Network [OSTI]

    Kim, KHK

    2006-01-01T23:59:59.000Z

    of time- constrained messages", IEEE Trans. on Computers,Mechanism for Real-Time Event Message Communicatoin K. H. (in facilitating state message communication from a producer

  15. Real-time sub- ngstrom imaging of reversible and irreversible...

    Office of Scientific and Technical Information (OSTI)

    ngstrom imaging of reversible and irreversible conformations in rhodium catalysts and graphene Citation Details Title: Real-time sub- ngstrom imaging of reversible and...

  16. acquisition enabling real-time: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    discusses the collection of complete real time data from different source systems such as SCADA, AMR, Databases and Internet which is pushed into an On Line Transaction Process...

  17. Graphene Signal Amplification for Sensitive and Real-Time Fluorescence Anisotropy Detection of Small Molecules

    E-Print Network [OSTI]

    Tan, Weihong

    Graphene Signal Amplification for Sensitive and Real-Time Fluorescence Anisotropy Detection graphene oxide (GO) as the signal amplifier. Because of the extraordinarily larger volume of GO

  18. STORM WATER Residential

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    STORM WATER QUALITY HOTLINE UCSC Residential Car Washing http THAT MAY CAUSE ENVIRONMENTAL HARM TO THE STORM WATER QUALITY HOTLINE: (831) 459-2553. LIKE US ON FACEBOOK AT UCSC STORM WATER MANAGEMENT PROGRAM! DID YOU KNOW? PRACTICAL SOLUTIONS > USE A COMMERCIAL CAR WASH

  19. Analysis of real-time reservoir monitoring : reservoirs, strategies, & modeling.

    SciTech Connect (OSTI)

    Mani, Seethambal S.; van Bloemen Waanders, Bart Gustaaf; Cooper, Scott Patrick; Jakaboski, Blake Elaine; Normann, Randy Allen; Jennings, Jim (University of Texas at Austin, Austin, TX); Gilbert, Bob (University of Texas at Austin, Austin, TX); Lake, Larry W. (University of Texas at Austin, Austin, TX); Weiss, Chester Joseph; Lorenz, John Clay; Elbring, Gregory Jay; Wheeler, Mary Fanett (University of Texas at Austin, Austin, TX); Thomas, Sunil G. (University of Texas at Austin, Austin, TX); Rightley, Michael J.; Rodriguez, Adolfo (University of Texas at Austin, Austin, TX); Klie, Hector (University of Texas at Austin, Austin, TX); Banchs, Rafael (University of Texas at Austin, Austin, TX); Nunez, Emilio J. (University of Texas at Austin, Austin, TX); Jablonowski, Chris (University of Texas at Austin, Austin, TX)

    2006-11-01T23:59:59.000Z

    The project objective was to detail better ways to assess and exploit intelligent oil and gas field information through improved modeling, sensor technology, and process control to increase ultimate recovery of domestic hydrocarbons. To meet this objective we investigated the use of permanent downhole sensors systems (Smart Wells) whose data is fed real-time into computational reservoir models that are integrated with optimized production control systems. The project utilized a three-pronged approach (1) a value of information analysis to address the economic advantages, (2) reservoir simulation modeling and control optimization to prove the capability, and (3) evaluation of new generation sensor packaging to survive the borehole environment for long periods of time. The Value of Information (VOI) decision tree method was developed and used to assess the economic advantage of using the proposed technology; the VOI demonstrated the increased subsurface resolution through additional sensor data. Our findings show that the VOI studies are a practical means of ascertaining the value associated with a technology, in this case application of sensors to production. The procedure acknowledges the uncertainty in predictions but nevertheless assigns monetary value to the predictions. The best aspect of the procedure is that it builds consensus within interdisciplinary teams The reservoir simulation and modeling aspect of the project was developed to show the capability of exploiting sensor information both for reservoir characterization and to optimize control of the production system. Our findings indicate history matching is improved as more information is added to the objective function, clearly indicating that sensor information can help in reducing the uncertainty associated with reservoir characterization. Additional findings and approaches used are described in detail within the report. The next generation sensors aspect of the project evaluated sensors and packaging survivability issues. Our findings indicate that packaging represents the most significant technical challenge associated with application of sensors in the downhole environment for long periods (5+ years) of time. These issues are described in detail within the report. The impact of successful reservoir monitoring programs and coincident improved reservoir management is measured by the production of additional oil and gas volumes from existing reservoirs, revitalization of nearly depleted reservoirs, possible re-establishment of already abandoned reservoirs, and improved economics for all cases. Smart Well monitoring provides the means to understand how a reservoir process is developing and to provide active reservoir management. At the same time it also provides data for developing high-fidelity simulation models. This work has been a joint effort with Sandia National Laboratories and UT-Austin's Bureau of Economic Geology, Department of Petroleum and Geosystems Engineering, and the Institute of Computational and Engineering Mathematics.

  20. Real-Time Active Cosmic Neutron Background Reduction Methods

    SciTech Connect (OSTI)

    Mukhopadhyay, Sanjoy; Maurer, Richard; Wolff, Ronald; Mitchell, Stephen; Guss, Paul

    2013-09-01T23:59:59.000Z

    Neutron counting using large arrays of pressurized 3He proportional counters from an aerial system or in a maritime environment suffers from the background counts from the primary cosmic neutrons and secondary neutrons caused by cosmic ray?induced mechanisms like spallation and charge-exchange reaction. This paper reports the work performed at the Remote Sensing LaboratoryAndrews (RSL-A) and results obtained when using two different methods to reduce the cosmic neutron background in real time. Both methods used shielding materials with a high concentration (up to 30% by weight) of neutron-absorbing materials, such as natural boron, to remove the low-energy neutron flux from the cosmic background as the first step of the background reduction process. Our first method was to design, prototype, and test an up-looking plastic scintillator (BC-400, manufactured by Saint Gobain Corporation) to tag the cosmic neutrons and then create a logic pulse of a fixed time duration (~120 ?s) to block the data taken by the neutron counter (pressurized 3He tubes running in a proportional counter mode). The second method examined the time correlation between the arrival of two successive neutron signals to the counting array and calculated the excess of variance (Feynman variance Y2F)1 in the neutron count distribution from Poisson distribution. The dilution of this variance from cosmic background values ideally would signal the presence of man-made neutrons.2 The first method has been technically successful in tagging the neutrons in the cosmic-ray flux and preventing them from being counted in the 3He tube array by electronic vetofield measurement work shows the efficiency of the electronic veto counter to be about 87%. The second method has successfully derived an empirical relationship between the percentile non-cosmic component in a neutron flux and the Y2F of the measured neutron count distribution. By using shielding materials alone, approximately 55% of the neutron flux from man-made sources like 252Cf or Am-Be was removed.

  1. A Study of Concurrent Real-Time Garbage Collectors Filip Pizlo

    E-Print Network [OSTI]

    Rinetzky, Noam

    A Study of Concurrent Real-Time Garbage Collectors Filip Pizlo Purdue University West Lafayette at the microseconds level. Concurrent collectors also offer much better scalability over incremental collectors. The main prob- lem with concurrent real-time collectors is their complexity. The first concurrent real

  2. Handles Revisited: Optimising Performance and Memory Costs in a Real-Time Collector

    E-Print Network [OSTI]

    Kent, University of

    Handles Revisited: Optimising Performance and Memory Costs in a Real-Time Collector Tomas Kalibera garbage collectors must update all references to ob- jects they move. Updating is a lengthy operation references have been updated which, in a real-time collector, must be done incrementally. One solution

  3. Combined Scheduling of Hard and Soft Real-Time Tasks in Multiprocessor Systems

    E-Print Network [OSTI]

    Manimaran, Govindarasu

    Combined Scheduling of Hard and Soft Real-Time Tasks in Multiprocessor Systems B. Duwairi and G to support combined scheduling of hard and soft real-time tasks in such systems, in which multiprocessors with periodic soft tasks. Scheduling any of these task combinations in multiprocessor systems is a #12

  4. Object-Oriented Real-Time Systems Analysis and Design Issues

    E-Print Network [OSTI]

    Fayad, Mohamed

    -time systems. The assumption was made that the analysis and design methodology was fully object-oriented (O) The fundamental issues in real-time systems (hard and soft) are the view of the processes (critical, eObject-Oriented Real-Time Systems Analysis and Design Issues Workshop Co-Chairs Mohamed E. Fayad

  5. Reducing WWW Latency and Bandwidth Requirements by RealTime Distillation

    E-Print Network [OSTI]

    California at Berkeley, University of

    Reducing WWW Latency and Bandwidth Requirements by RealTime Distillation Armando Fox and Eric A Distillation and Refinement Can Help 1. The Concept of DatatypeSpecific Distillation 2. Refinement 3. Trading. Optimizing for Rendering on Impoverished Devices 3. An Implemented HTTP Proxy Based on RealTime Distillation

  6. Real-Time Demand Response with Uncertain Renewable Energy in Smart Grid

    E-Print Network [OSTI]

    Low, Steven H.

    Real-Time Demand Response with Uncertain Renewable Energy in Smart Grid Libin Jiang and Steven Low manages user load through real-time demand response and purchases balancing power on the spot market and demand response in the presence of uncertain renewable supply and time-correlated demand. The overall

  7. Near Optimal Demand-Side Energy Management Under Real-time Demand-Response Pricing

    E-Print Network [OSTI]

    Boutaba, Raouf

    Near Optimal Demand-Side Energy Management Under Real-time Demand-Response Pricing Jin Xiao, Jae--In this paper, we present demand-side energy manage- ment under real-time demand-response pricing as a task, demand-response, energy management I. INTRODUCTION The growing awareness of global climate change has

  8. Precomputed Wave Simulation for Real-Time Sound Propagation of Dynamic Sources in Complex Scenes

    E-Print Network [OSTI]

    North Carolina at Chapel Hill, University of

    Precomputed Wave Simulation for Real-Time Sound Propagation of Dynamic Sources in Complex Scenes of North Carolina at Chapel Hill Abstract We present a method for real-time sound propagation that captures all wave effects, including diffraction and reverberation, for multi- ple moving sources and a moving

  9. Modeling and rendering heterogeneous fog in real-time using B-Spline wavelets

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    Modeling and rendering heterogeneous fog in real-time using B-Spline wavelets Anthony Giroud method to render heterogeneous fog in real-time. The extinction function of our fog, related to its to obtain a decomposition in both space and frequency domains. A grid traversal is used to render the fog

  10. TetSplat: Real-Time Rendering and Volume Clipping of Large Unstructured Tetrahedral Meshes

    E-Print Network [OSTI]

    TetSplat: Real-Time Rendering and Volume Clipping of Large Unstructured Tetrahedral Meshes Ken-resolution data representations. These compact hierarchical data structures are then adaptively rendered and probed in real-time on a commodity PC. Our point-based rendering algorithm, which is inspired by QSplat

  11. Formal Methods for the Specification and Design of RealTime Safety Critical

    E-Print Network [OSTI]

    Ostroff, Jonathan S.

    Formal Methods for the Specification and Design of RealTime Safety Critical Systems \\Lambda Jonathan S. Ostroff April, 1992 Abstract Safety critical computers increasingly affect nearly every aspect, designing and verifying realtime sys tems, so as to improve their safety and reliability. \\Lambda

  12. RealTime Robot Motion Planning Using Rasterizing Computer Graphics Hardware

    E-Print Network [OSTI]

    Richardson, David

    , Ithaca, N.Y. 14853 y Assistant Professor and Director, Computer Science Robotics Labora tory, DepartmentRealTime Robot Motion Planning Using Rasterizing Computer Graphics Hardware Jed Lengyel \\Lambda Mark Reichert \\Lambda Bruce R. Donald y Donald P. Greenberg z Abstract We present a realtime robot

  13. Energy Management for Real-Time Embedded Applications with Compiler Support

    E-Print Network [OSTI]

    Melhem, Rami

    Energy Management for Real-Time Embedded Applications with Compiler Support Nevine Abou device energy has become one of the most impor- tant challenges to embedded systems designers. Processors supported by the Defense Advanced Research Projects Agency through Power Aware Real- Time Systems (PARTS

  14. Microfluidic single cell real-time PCR for comparative analysis of gene expression patterns

    E-Print Network [OSTI]

    Quake, Stephen R.

    Microfluidic single cell real-time PCR for comparative analysis of gene expression patterns collection. We present here a high-content microfluidic real-time platform as a powerful tool expression; dynamic assay; microfluidic; pluripotent INTRODUCTION Novel genomic technologies have paved

  15. Building Human-Level AI for Real-Time Strategy Games Ben G. Weber

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    Building Human-Level AI for Real-Time Strategy Games Ben G. Weber Expressive Intelligence Studio UC to build robust intelligence. In particular, real- time strategy games provide a multi-scale challenge by studying a corpus of games, building models for anticipating op- ponent actions, and practicing within

  16. REAL-TIME ACTIVE PIPELINE INTEGRITY DETECTION (RAPID) SYSTEM FOR CORROSION DETECTION AND QUANTIFICATION

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    alone there are over 2 million miles of natural gas transmission and distribution pipeline providing 24REAL-TIME ACTIVE PIPELINE INTEGRITY DETECTION (RAPID) SYSTEM FOR CORROSION DETECTION detection Acellent has developed a Real-time Active Pipeline Integrity Detection (RAPID) system. The RAPID

  17. Real Time Dynamic Wind Calculation for a Pressure Driven Wind System Criss Martin

    E-Print Network [OSTI]

    Parberry, Ian

    for controllable real time dynamic wind cal- culation for a pressure driven wind system. Our method allows re to specify the positions and pressure val- ues of a high and a low pressure system to drive the wind. SetupReal Time Dynamic Wind Calculation for a Pressure Driven Wind System Criss Martin Dept. of Computer

  18. A real time neural energy management strategy for a hybrid pneumatic engine

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    A real time neural energy management strategy for a hybrid pneumatic engine Guillaume Colin G.bloch@esstin.uhp-nancy.fr} Abstract: Various energy management strategies for a hybrid pneumatic engine are reviewed and a real time Recognition. Keywords: energy management strategy, fuel saving, hybrid vehicle, hybrid pneumatic engine

  19. Real-time Control of a Tokamak Plasma Using Neural Networks

    E-Print Network [OSTI]

    Bishop, Christopher M.

    Real-time Control of a Tokamak Plasma Using Neural Networks Christopher M. Bishop , Paul S. Haynes of neural networks for real-time control of the high temperature plasma in a tokamak fusion experiment. The tokamak is currently the principal experimental device for research into the magnetic confinement approach

  20. Real time search on the web: Queries, topics, and economic value Bernard J. Jansen a,

    E-Print Network [OSTI]

    Jansen, James

    examine aggregate usage of the search engine, including number of users, queries, and terms. We term interest in a topic and the polling nature of real time queries. Concerning search topics geographical affinity, pointing to a location-based aspect to real time search. In terms of economic value, we

  1. Multiprocessor Extensions to Real-Time Calculus Hennadiy Leontyev, Samarjit Chakraborty and James H. Anderson

    E-Print Network [OSTI]

    Anderson, James

    ,anderson}@cs.unc.edu Institute for Real-Time Computer Systems (RCS), TU Munich samarjit@tum.de Abstract--Many embedded platforms such platforms are of interest. In prior work, the real-time calculus framework has proven to be very effective to a large family of fixed job-priority schedulers. The utility of the proposed analysis framework

  2. A (Smart) Real-time PMU-assisted Power Transfer Limitation Monitoring

    E-Print Network [OSTI]

    Stability Analysis (DSA) Energy Management System (EMS) Real-Time Network Information DiagnosticA (Smart) Real-time PMU-assisted Power Transfer Limitation Monitoring and Enhancement System) PJM's On-line Available transfer capability monitoring system and (smart) enhancements (i.e. increase

  3. GroupWeb: A WWW Browser as Real Time Groupware Saul Greenberg and Mark Roseman

    E-Print Network [OSTI]

    Greenberg, Saul

    and conferencing. Keywords Word wide web, groupware, shared visual workspaces. INTRODUCTION The World Wide Web and navigate World Wide Web pages in real time. Its groupware features include document and view slavingGroupWeb: A WWW Browser as Real Time Groupware Saul Greenberg and Mark Roseman Department

  4. Transfer Learning of Hierarchical Task-Network Planning Methods in a Real-Time Strategy Game

    E-Print Network [OSTI]

    Muoz-Avila, Hctor

    simulations. Using simulations during the planning and learning process enables the system to get information, and simulation in a real-time strategy game engine. Introduction Learning in the context of automated planningTransfer Learning of Hierarchical Task-Network Planning Methods in a Real-Time Strategy Game

  5. Real-Time Electricity Markets Material from this introduction was adapted from [1].

    E-Print Network [OSTI]

    McCalley, James D.

    ), or balancing market. #12;2 A third market, called the operating reserve market, addresses ancillary services of products: Energy: based on resource offers and demand bids Regulating reserve: for real-time balancing1 Real-Time Electricity Markets Material from this introduction was adapted from [1

  6. An integrated system for real-time Model Predictive Control of humanoid robots

    E-Print Network [OSTI]

    Todorov, Emanuel

    this goal. The automatic controller is based on real-time model-predictive control (MPC) applied to the full. The resulting composite cost is sent to the MPC machinery which constructs a new locally-optimal time- varying-based optimal control is called Model-Predictive Control (MPC), an approach that relies on real-time trajectory

  7. Computer Graphics in Real-time Docking with Energy Calculation and Minimization

    E-Print Network [OSTI]

    Levitt, Michael

    Computer Graphics in Real-time Docking with Energy Calculation and Minimization N. Pattabiraman, M. Levitt*, T.E. Ferrin, R. Langridge Computer Graphics Laboratory, Department of Pharmaceutical Chemistry 1985 We describe a real-time docking method using molecular graphics and high-speed calculation

  8. Technique for Real-Time Measurements of Endothelial Permeability in a Microfluidic

    E-Print Network [OSTI]

    Simmons, Craig A.

    Technique for Real-Time Measurements of Endothelial Permeability in a Microfluidic Membrane Chip microfluidic platform to measure real-time perme- ability of endothelial cell monolayers on porous mem- branes of cell-free and cell-bound mem- brane layers. This technique is a highly sensitive, novel microfluidic

  9. Approximate Response Time for Fixed Priority Real-Time Systems with Energy-Harvesting

    E-Print Network [OSTI]

    Boyer, Edmond

    Approximate Response Time for Fixed Priority Real-Time Systems with Energy-Harvesting Yasmina sufficient schedulability tests for fixed-priority pre-emptive scheduling of a real-time system under energy constraints. In this problem, energy is harvested from the ambient environment and used to replenish a storage

  10. Real-Time damage localization by means of MEMS sensors and use of wireless data transmission

    E-Print Network [OSTI]

    Shinozuka, Masanobu

    Real-Time damage localization by means of MEMS sensors and use of wireless data transmission such as water delivery networks are damaged, it is critical to pinpoint the location of the damage, to assess the extent of the damage, and to mitigate the damage in real-time. We propose a wireless sensor network

  11. Efficient Power Management of Heterogeneous Soft Real-Time Clusters Leping Wang, Ying Lu

    E-Print Network [OSTI]

    Lu, Ying

    Efficient Power Management of Heterogeneous Soft Real-Time Clusters Leping Wang, Ying Lu Department}@cse.unl.edu Abstract With growing cost of electricity, the power management of server clusters has become an important for power management of heterogeneous soft real-time clusters. It is built on simple but effective

  12. An Efficient Threshold-Based Power Management Mechanism for Heterogeneous Soft Real-Time Clusters

    E-Print Network [OSTI]

    Lu, Ying

    An Efficient Threshold-Based Power Management Mechanism for Heterogeneous Soft Real-Time Clusters {lwang, ylu}@cse.unl.edu Abstract With growing cost of electricity, the power management of server proposes an efficient algorithm for power management of heterogeneous soft real-time clusters. It is built

  13. Task Merging for Dynamic Power Management of Cyclic Applications in Real-Time Multiprocessor Systems

    E-Print Network [OSTI]

    Qiu, Qinru

    Task Merging for Dynamic Power Management of Cyclic Applications in Real-Time Multiprocessor--In this paper we propose the method of task merging and idle period clustering for dynamic power management (DPM management, low power, multiprocessor, real-time I. INTRODUCTION Multiprocessor systems, which were used only

  14. Precomputed Radiance Transfer for Real-Time Rendering in Dynamic, Low-Frequency Lighting Environments

    E-Print Network [OSTI]

    O'Brien, James F.

    Precomputed Radiance Transfer for Real-Time Rendering in Dynamic, Low-Frequency Lighting a new, real-time method for rendering diffuse and glossy objects in low-frequency lighting environments-frequency incident lighting into transferred radiance which includes global effects like shadows and interreflections

  15. 6189-47, Session 10 Optical spatial filtering velocimetry sensor for real-time

    E-Print Network [OSTI]

    6189-47, Session 10 Optical spatial filtering velocimetry sensor for real-time in-plane vibration-contact, low-cost optical sensor for real time detection and active vibration control of mechanical devices sensitivity to any translational vibration. The calibration of the sensor is independent of the optical

  16. MIRROR: A StateConscious Concurrency Control Protocol for Replicated RealTime Databases \\Lambda

    E-Print Network [OSTI]

    Stankovic, John A.

    University of Virginia Charlottesville, VA 22903 stankovic@cs.virginia.edu Abstract Data replication can help MIRROR (Managing Isolation in Replicated Realtime Object Repositories), a con currency control protocol Foundation Grant EIA9900895. 1 #12; (nonrealtime) database system, (b) MIRROR provides the best

  17. A Simulation Tool for Real-time Systems using Environmental Energy Harvesting Maryline CHETTO

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    A Simulation Tool for Real-time Systems using Environmental Energy Harvesting Maryline CHETTO, we present a simulation tool for real-time systems using environmental energy harvesting. Energy. The simulator enables to construct an optimal schedule for any task set, battery capacity and energy source

  18. NSTX-U Advances in Real-time C++11 on Linux

    SciTech Connect (OSTI)

    Erickson, Keith G

    2014-04-01T23:59:59.000Z

    Programming languages like C and Ada combined with proprietary embedded operating systems have dominated the real-time application space for decades. The new C++11standard includes native, language-level support for concurrency, a required feature for any nontrivial event-oriented real-time software. Threads, Locks, and Atomics now exist to provide the necessary tools to build the structures that make up the foundation of a complex real-time system. The National Spherical Torus Experiment Upgrade (NSTX-U) at the Princeton Plasma Physics Laboratory (PPPL) is breaking new ground with the language as applied to the needs of fusion devices. A new Digital Coil Protection System (DCPS) will serve as the main protection mechanism for the magnetic coils, and it is written entirely in C++11 running on Concurrent Computer Corporation's real-time operating system, RedHawk Linux. It runs over 600 algorithms in a 5 kHz control loop that determine whether or not to shut down operations before physical damage occurs. To accomplish this, NSTX-U engineers developed software tools that do not currently exist elsewhere, including real-time atomic synchronization, real-time containers, and a real-time logging framework. Together with a recent (and carefully configured) version of the GCC compiler, these tools enable data acquisition, processing, and output using a conventional operating system to meet a hard real-time deadline (that is, missing one periodic is a failure) of 200 microseconds.

  19. Energy-Efficient Speed Scheduling for Real-Time Tasks under Thermal Constraints

    E-Print Network [OSTI]

    Wang, Shengquan

    Energy-Efficient Speed Scheduling for Real-Time Tasks under Thermal Constraints Shengquan Wang. We develop energy-efficient speed scheduling schemes for frame-based real-time tasks under thermal- sumption with comparison to the reactive schemes in the literature. Keywords: Energy-efficient scheduling

  20. In Proceedings of TriComm '91 Delay Jitter Control for Real-Time Communication

    E-Print Network [OSTI]

    Zhang, Hui

    In Proceedings of TriComm '91 Delay Jitter Control for Real-Time Communication in a Packet study the feasibil- ity of bounding the delay jitter for real-time channels in a packet-switched store show that the scheme is capable of providing a significant reduction in delay jitter

  1. Fast three-dimensional terahertz computed tomography using real-time line projection of

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    Fast three-dimensional terahertz computed tomography using real-time line projection of intense terahertz computed tomography by using real-time line projection of intense terahertz beam generated). 4. B. Ferguson, S. Wang, D. Gray, D. Abbot, and X.-C. Zhang, "T-ray computed tomography," Opt. Lett

  2. Dynamic Voltage Scaling for the Schedulability of Jitter-Constrained Real-Time Embedded Systems*

    E-Print Network [OSTI]

    Hu, Xiaobo Sharon

    Dynamic Voltage Scaling for the Schedulability of Jitter-Constrained Real-Time Embedded Systems}@ida.ing.tu-bs.de Abstract-- Jitter is a critical problem for the design of both distributed embedded systems and real-time control systems. This work considers meeting the completion jitter constraints of a set of independent

  3. In Proceedings of TriComm '91 Delay Jitter Control for RealTime Communication

    E-Print Network [OSTI]

    Zhang, Hui

    In Proceedings of TriComm '91 Delay Jitter Control for RealTime Communication in a Packet study the feasibil ity of bounding the delay jitter for realtime channels in a packetswitched store show that the scheme is capable of providing a significant reduction in delay jitter

  4. Schedulability Analysis for Fixed Priority Real-Time Systems with Energy-Harvesting

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Schedulability Analysis for Fixed Priority Real-Time Systems with Energy-Harvesting Yasmina sufficient schedulability tests for fixed-priority pre-emptive scheduling of a real-time system under energy constraints. In this problem, energy is harvested from the ambient environment and used to replenish a storage

  5. Three-point function at finite temperature in the real-time formalism

    SciTech Connect (OSTI)

    Kobes, R. (Department of Physics, University of Winnipeg, 515 Portage Avenue, Winnipeg, Manitoba (Canada))

    1991-09-09T23:59:59.000Z

    One-particle-irreducible amputated graphs differ qualitatively at finite temperature when calculated in the imaginary-time and real-time formalisms. Here we show within the real-time formalism for the three-point function that when external propagators are attached certain amputated functions can be inferred which have a close relation to those of the imaginary-time formalism.

  6. Sismos l'Ecole: A Worldwide Network of Real-Time Seismometers in Schools

    E-Print Network [OSTI]

    Nolet, Guust

    Sismos à l'Ecole: A Worldwide Network of Real-Time Seismometers in Schools by F. Courboulex, J. L countries in the world. Thanks to Sismos à l'Ecole (SaE) network stations, acces- sible in real time

  7. Platform for in situ real-time measurement of protein-induced conformational changes of DNA

    E-Print Network [OSTI]

    Platform for in situ real-time measurement of protein-induced conformational changes of DNA Philipp, 2009) A platform for in situ and real-time measurement of protein- induced conformational changes in ds. The platform can accommodate individual spots of microar- rayed dsDNA on individually controlled

  8. Real-time fault detection and isolation in biological wastewater treatment plants

    E-Print Network [OSTI]

    Real-time fault detection and isolation in biological wastewater treatment plants F. Baggiani and S@dsi.unifi.it Automatic fault detection is becoming increasingly important in wastewater treatment plant operation, given automation controllers, wastewater treatment INTRODUCTION Real-time monitoring is an increasingly important

  9. Mixed-Criticality Multiprocessor Real-Time Systems: Energy Consumption vs Deadline Misses

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    Mixed-Criticality Multiprocessor Real-Time Systems: Energy Consumption vs Deadline Misses Vincent that using the best compromise, the energy consumption can be reduced up to 17% while the percentage the energy consumption of MC systems. The energy consumption of embedded real-time systems is indeed

  10. Modeling and Analyzing Asynchronous Real-Time Systems Victor Pollex, Steffen Kollmann, Frank Slomka

    E-Print Network [OSTI]

    Ulm, Universitt

    frequencies are used. For instance a combustion engine where ignition times have to be computed for each to be verified. With a simulation the system's real-time behaviour can be ob- served. Due to the rarity of corner cases a simulation can only verify the real-time requirements with a certain prob- ability. A formal

  11. Design Storm for Total Retention.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Recovery of water quality capture volume Design Storms Storm events: 24-hour storm) Percentile rainfall event (e.g., an 80th percentile rainfall event) Limitations: Actual storm...

  12. area silicon tracking: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    used for these provisional Southern Hemisphere southeast direction toward the circumpolar trough. Due storm tracks were prepared by the South African Weather to topographic,...

  13. Real-time hadron properties at finite temperature from a Euclidean lattice

    SciTech Connect (OSTI)

    Huang, S. (Department of Physics, FM-15, University of Washington, Seattle, Washington 98195 (United States))

    1993-01-15T23:59:59.000Z

    From a dispersion relation point of view a two-point function in either real time or imaginary time is governed by the same spectral function at finite temperature. This fact can be exploited to extract real-time information from a finite Euclidean lattice. To illustrate the idea, the Gross-Neveu model in the large-[ital N] limit is solved both in the Minkowski continuum at finite temperature and on a finite temporal Euclidean lattice. The temperature dependences of the real-time bound-state properties and the screening masses are calculated. The relevance of this approach to the realistic QCD simulations is also briefly discussed.

  14. Energy-Efficient Duplex and TMR Real-Time Systems Appeared in the IEEE Real-Time Systems Symposium, Dec 2002

    E-Print Network [OSTI]

    Melhem, Rami

    for autonomous critical missions need such degrees of re- liability, but energy consumption becomes a dominant the energy used by reliable computers onboard autonomous vehicles. The conservation allows these systems of electrical power for operation and cooling. Examples where energy consumption and real time are of paramount

  15. In Proceedings of RTSS'94: The 14th IEEE Real-Time System Symposium, San Juan, Puerto Rico, Dec 1994. Timeliness via Speculation for Real-Time Databases

    E-Print Network [OSTI]

    Bestavros, Azer

    . Pessimistic (PCC) protocols detect con icts as soon as they occur and resolve them using blocking. Optimistic (OCC) protocols detect con icts at transac- tion commit time and resolve them using rollbacks. For real-time databases, blockages and rollbacks are hazards that increase the likelihood of transactions missing

  16. atom-resolved real-time studies: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    are collected in human-avatar promising results about the role and functioning of joint attention in human-avatar interactions. Keywords Yu, Chen 7 REVIEW ARTICLE Real-time...

  17. Closed-loop Real-time Control of a Novel Linear Magnetostrictive Actuator

    E-Print Network [OSTI]

    Chen, Chien-Fan

    2010-10-12T23:59:59.000Z

    This thesis presents the design of various closed-loop real-time control of a novel linear magnetostrictive actuator. The novel linear magnetostrictive actuator which uses Terfenol-D as the magnetostrictive material was developed by Sadighi...

  18. Real-time detection of ambient aerosols using photothermal interferometry: Folded Jamin interferometer

    E-Print Network [OSTI]

    Real-time detection of ambient aerosols using photothermal interferometry: Folded Jamin of instrumentation that can directly measure ambient aerosol absorption through photothermal interferometry. The hallmark of this approach is its ability to directly measure aerosol absorption without interference from

  19. CPS : Small : Dynamically Managing the Real-time Fabric of a Wireless Sensor-Actuator Network

    E-Print Network [OSTI]

    Lemmon, Michael

    CPS : Small : Dynamically Managing the Real-time Fabric of a Wireless Sensor-Actuator Network 1 as a multi-player game between applications (users) that is essentially a network utility maximization (NUM

  20. A power line impedance spectrum analyzer using real-time digital signal processing

    E-Print Network [OSTI]

    Margolis, Michael G

    1993-01-01T23:59:59.000Z

    Power distribution system impedance as seen by power converters and other non-linear loads is important for the determination of harmonic current injection and propagation caused by these loads. This thesis presents a real-time power line impedance...

  1. Real-time implementation of a vision based automatic push button

    E-Print Network [OSTI]

    Rajkotwala, Farida

    1996-01-01T23:59:59.000Z

    This thesis presents a real-time digital signal Processing (DSP) system to detect the presence of pedestrians waiting to cross an intersection. Such a system would improve both pedestrian and vehicle flow considering that ...

  2. Imaging the Brain in Real-Time with PET-Enabled "Helmet Cam"

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Imaging the Brain in Real-Time with a PET-Enabled "Helmet-Cam" Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens...

  3. Geek-Up[09.03.10] -- Innovative Silicon Wafers, Real-Time Power...

    Broader source: Energy.gov (indexed) [DOE]

    difference. We buy power to decrease the system load or sell to increase it. Or, the hydro operator can increase or decrease generation at the dams." Learn how BPA's real-time...

  4. Real-time programming and the big ideas of computational literacy

    E-Print Network [OSTI]

    Hancock, Christopher Michael, 1961-

    2003-01-01T23:59:59.000Z

    Though notoriously difficult, real-time programming offers children a rich new set of applications, and the opportunity to engage bodily knowledge and experience more centrally in intellectual enterprises. Moreover, the ...

  5. A smartphone interface for a wireless EEG headset with real-time 3D reconstruction

    E-Print Network [OSTI]

    and 3D reconstruction. Introduction Functional brain imaging techniques including fMRI and PET provide gestures (see Fig. 1). Evaluation A major concern in mobile real-time systems is the power consumption

  6. Development of Real-time Closed-loop Control Algorithms for Grid-scale Battery

    E-Print Network [OSTI]

    i Development of Real-time Closed-loop Control Algorithms for Grid-scale Battery Energy Storage Systems Prepared for the U.S. Department of Energy Office of Electricity Delivery and Energy ................................................................................................. 23 6.2. Data Storage

  7. Real-Time Motion Planning With Applications to Autonomous Urban Driving

    E-Print Network [OSTI]

    Kuwata, Yoshiaki

    This paper describes a real-time motion planning algorithm, based on the rapidly-exploring random tree (RRT) approach, applicable to autonomous vehicles operating in an urban environment. Extensions to the standard RRT are ...

  8. Energy-optimal schedules of real-time jobs with hard deadlines

    E-Print Network [OSTI]

    George, John Vijoe

    2005-11-01T23:59:59.000Z

    In this thesis, we develop algorithms that make optimal use of frequency scaling to schedule jobs with real??time requirements. Dynamic voltage scaling is a technique used to reduce energy consumption in wide variety of systems. Reducing supply...

  9. Towards Real-Time and Memory Efficient Predictions of Valve States in Diesel Engines

    E-Print Network [OSTI]

    Zell, Andreas

    Towards Real-Time and Memory Efficient Predictions of Valve States in Diesel Engines Philippe Komma Tubingen, Germany {philippe.komma, andreas.zell}@uni-tuebingen.de system for a diesel engine

  10. System for remote multichannel real-time monitoring of mouse ECG via the Internet

    E-Print Network [OSTI]

    Oefinger, Matthew Blake, 1976-

    2003-01-01T23:59:59.000Z

    A hardware/software system was developed to allow real-time monitoring of multiple physiological signals simultaneously via the Internet. The hardware is specifically designed for measuring ECG signals from mice, while the ...

  11. Successful Real Time Pricing (RTP) Tieline Control Must Do More Than Save Money

    E-Print Network [OSTI]

    Robinson, J.

    2008-01-01T23:59:59.000Z

    Industrial cogeneration facilities are finding electrical procurement contracts with Real Time Pricing (RTP) clauses attractive. By accepting a portion of the variable energy cost risk, the industrial can reduce the average cost of electricity...

  12. Parallel and real-time implementation of an acoustic echo canceller using oversampled wavelet frame algorithms

    E-Print Network [OSTI]

    Tam, Pak-Yin

    1995-01-01T23:59:59.000Z

    This thesis describes a novel echo cancellation system that eliminates nonstationary echoes with long acoustic delays in real-time. By combining subband adaptive filtering and active system identification based on fast wavelet transform...

  13. An SDRAM Controller for Real-Time Systems Edgar Lakis, Martin Schoeberl

    E-Print Network [OSTI]

    Schoeberl, Martin

    An SDRAM Controller for Real-Time Systems Edgar Lakis, Martin Schoeberl Department of Applied Mathematics and Computer Science Technical University of Denmark Email: edgar.lakis@gmail.com, masca

  14. Real-time monitoring of complex industrial processes with particle filters

    E-Print Network [OSTI]

    Poole, David

    Real-time monitoring of complex industrial processes with particle filters Ruben Morales-Men, open air-flow grill and clean temperature sensor (we denote this discrete state ). We induced 3

  15. Real-time monitoring of homoepitaxial and heteroepitaxial processes by p-polarized reflectance spectroscopy

    E-Print Network [OSTI]

    Dietz, Nikolaus

    of heteroepitaxial and the homoepitaxial growth. Tertiary-butylphosphine TBP and triethylgallium TEG beams of the epilayer due to the pyrolysis of the TBP and TEG molecules.1 For the real-time monitoring of GaP growth we

  16. SINGLE SILVER NANOPARTICLES AS REAL-TIME OPTICAL SENSORS WITH ZEPTOMOLE SENSITIVITY

    E-Print Network [OSTI]

    Shull, Kenneth R.

    SINGLE SILVER NANOPARTICLES AS REAL-TIME OPTICAL SENSORS WITH ZEPTOMOLE SENSITIVITY Adam D. Mc-time sensor technologies. (A) A dark-field optical image of Ag nanoparticles immobilized on a glass substrate

  17. A dynamic slack management technique for real-time distributed embedded systems

    E-Print Network [OSTI]

    Acharya, Subrata

    2006-04-12T23:59:59.000Z

    This work presents a novel slack management technique, the Service Rate Based Slack Distribution Technique, for dynamic real-time distributed embedded systems targeting the reduction and management of energy consumption. Energy minimization...

  18. Dynamics and real-time optimal control of satellite attitude and satellite formation systems

    E-Print Network [OSTI]

    Yan, Hui

    2006-10-30T23:59:59.000Z

    In this dissertation the solutions of the dynamics and real-time optimal control of magnetic attitude control and formation flying systems are presented. In magnetic attitude control, magnetic actuators for the time-optimal rest-to-rest maneuver...

  19. Real-time impluse-based rigid body simulation and rendering

    E-Print Network [OSTI]

    Yuksel, Can

    2007-09-17T23:59:59.000Z

    The purpose of this thesis is to develop and demonstrate a physically based rigid body simulation with a focus on simplifications to achieve real-time performance. This thesis aims to demonstrate that by improving the efficiency with simplified...

  20. Real time monitoring of multiple wells flowing under pseudosteady state condition by using Kalman filtering

    E-Print Network [OSTI]

    Jacob, Suresh

    2002-01-01T23:59:59.000Z

    This work develops a method for the real time monitoring of well performance by using Kalman filtering. A system of two or more wells draining the same reservoir under pseudo steady state condition is monitored simultaneously to estimate both...

  1. Development of a Wireless Real-Time Productivity Measurement System for Rapid Construction Operations

    E-Print Network [OSTI]

    Kim, Seonghoon

    2008-01-01T23:59:59.000Z

    was developed. The WRITE System has a potential to strengthen communication and coordination among participants involved in the infrastructure construction process by providing more accurate productivity information in real time....

  2. Real-time trajectory optimization and air traffic control simulation for noise abatement approach procedures

    E-Print Network [OSTI]

    Zou, Feng, 1977-

    2004-01-01T23:59:59.000Z

    Aircraft noise is a major obstacle to the growth of aviation. This thesis presents an adaptive onboard real-time optimization algorithm and an Air Traffic Control simulation model that can minimize the aircraft approach ...

  3. Flow Control of Real Time Multimedia Applications Using Model Predictive Control with a Feed Forward Term

    E-Print Network [OSTI]

    Duong, Thien Chi

    2011-02-22T23:59:59.000Z

    FLOW CONTROL OF REAL TIME MULTIMEDIA APPLICATIONS USING MODEL PREDICTIVE CONTROL WITH A FEED FORWARD TERM A Thesis by THIEN CHI DUONG Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment... of the requirements for the degree of MASTER OF SCIENCE December 2010 Major Subject: Mechanical Engineering Flow Control of Real Time Multimedia Applications Using Model Predictive Control with Feed Forward Term...

  4. Real-time processing of remote sensor data as applied to Arctic ice classification

    E-Print Network [OSTI]

    Permenter, James Austin

    1973-01-01T23:59:59.000Z

    REAL-TIME PROCESSING OF REMOTE SENSOR DATA AS APPLIED TO ARCTIC ICE CLASSIFICATION A Thesis by JAMES AUSTIN PERMENTER partial ! Submitted to the Graduate College of Texas A)M University in fulfillment of the requirement for the degree... of MASTER OF SCIENCE December 1973 Major Subject: Electrical Engineering REAL-TIME PROCESSING OF REMOTE SENSOR DATA AS APPLIED TO ARCTIC ICE CLASSIFICATION A Thesis by James Austin Permenter Approved as to style and content by: ] ( rman of Commi...

  5. A real-time intercepting beam-profile monitor for a medical cyclotron

    SciTech Connect (OSTI)

    Hendriks, C.; Uittenbosch, T.; Cameron, D.; Kellogg, S.; Gray, D.; Buckley, K.; Schaffer, P.; Verzilov, V.; Hoehr, C. [TRIUMF, 4004 Wesbrook Mall, Vancouver, British Columbia V6T 2A3 (Canada)] [TRIUMF, 4004 Wesbrook Mall, Vancouver, British Columbia V6T 2A3 (Canada)

    2013-11-15T23:59:59.000Z

    There is a lack of real-time continuous beam-diagnostic tools for medical cyclotrons due to high power deposition during proton irradiation. To overcome this limitation, we have developed a profile monitor that is capable of providing continuous feedback about beam shape and current in real time while it is inserted in the beam path. This enables users to optimize the beam profile and observe fluctuations in the beam over time with periodic insertion of the monitor.

  6. Distributed connection management for real-time communication over wormhole-routed networks

    E-Print Network [OSTI]

    Sundaresan, Sharad

    1997-01-01T23:59:59.000Z

    DISTRIBUTED CONNECTION MANAGEMENT FOR REAL- TIME COMMUNICATION OVER WORMHOLE-ROUTED NETWORKS A Thesis by SHARAD SUNDARESAN Submitted to the Office of Graduate Studies of Texas ASM University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE August 1997 Major Subject: Computer Science DISTRIBUTED CONNECTION MANAGEMENT FOR REAL-TIME COMMUNICATION OVER WORMHOLE-ROUTED NETWORKS A Thesis by SHARAD SUNDARESAN Submitted to Texas AkM University in partial...

  7. A multiprocessor system for real-time simulation of power electronic circuits

    E-Print Network [OSTI]

    Qawasmi, Nabil Hussein

    1988-01-01T23:59:59.000Z

    that describes it [7]. Its applications are widely distributed among many areas of technology such as process controls, aerospace, and other engineering oriented system design and analysis problems. Real-time simulation is a much favored simulation method...A MULTIPROCESSOR SYSTEM FOR REAL-TIME SIMULATION OF POWER ELECTRONIC CIRCUITS A Thesis by NABIL HUSSEIN QAWASMI Submitted to the Graduate College of Texas AkM University in partial fulfillment of the requirement for the degree of MASTER...

  8. A comparison of Lagrangian inertia coefficients for robot manipulator dynamics to examine real-time applicability

    E-Print Network [OSTI]

    Roston, Gerald Paul

    1985-01-01T23:59:59.000Z

    A COMPARISON OF LAGRANGIAN INERTIA COEFFICIENTS FOR ROBOT MANIPULATOR DYNAMICS TO EXAMINE REAL-TIME APPLICABILITY A Thesis by GERALD PAUL ROSTON Submitted to the Graduate College of Texas A&M University in partial fulfillment... of the requirement for the degree of MASTER OF SCIENCE August 1985 Major Subject: Mechanical Engineering A COMPARISON OF LAGRANGIAN INERTIA COEFFICIENTS FOR ROBOT MANIPULATOR DYiNAMICS TO EXAMINE REAL-TIME APPLICABILITY A Thesis by GERALD PAUL ROSTON...

  9. A high-resolution, four-band SAR testbed with real-time image formation

    SciTech Connect (OSTI)

    Walker, B.; Sander, G.; Thompson, M.; Burns, B.; Fellerhoff, R.; Dubbert, D.

    1996-03-01T23:59:59.000Z

    This paper describes the Twin-Otter SAR Testbed developed at Sandia National Laboratories. This SAR is a flexible, adaptable testbed capable of operation on four frequency bands: Ka, Ku, X, and VHF/UHF bands. The SAR features real-time image formation at fine resolution in spotlight and stripmap modes. High-quality images are formed in real time using the overlapped subaperture (OSA) image-formation and phase gradient autofocus (PGA) algorithms.

  10. Real-Time Pricing- A Flexible Alternative for Electrical Power Supply

    E-Print Network [OSTI]

    Reynolds, S. D.; Frye, A. O. Jr.

    REAL-TIME PRICING - A FLEXIBLE ALTERNATIVE ..OR ELECTRICAL POWER SUPPLY S. D. REYNOLDS Manager of Industrial Marketing & Services Tennessee Valley Authority Chattanooga, Tennessee ABSTRACT In an increasingly competitive operating... conditions to more tl,an 240 mills per kilo,~atthollr 78 REAL-TIME PRICING A FLEXIBLE ALTERNATIVE rOR ELECTRICAL POWER SUPPLY S. D. REYNOLDS Manager of Industrial Marketing & Services Tennessee Valley Authority Chattanooga, Tennessee ABSTRACT...

  11. Real time MR Coronary Angiography at 3T P. K. Nguyen1

    E-Print Network [OSTI]

    Southern California, University of

    Real time MR Coronary Angiography at 3T P. K. Nguyen1 , K. Nayak2,3 , C. Cunningham3 , J. M. Santos3 , M. Tsukiji1 , J. Brittain4 , M. V. McConnell1 , D. Nishimura3 , B. Hu3 , J. Pauly3 , P. Yang1 1 Park, CA, United States Introduction. Real time MR eliminates the need for cardiac-gating or breath

  12. Real-time Molecular Study of Bystander Effects of Low dose Low LET radiation Using Living Cell Imaging and Nanoparticale Optics

    SciTech Connect (OSTI)

    Natarajan, Mohan [UT Health Science Center at San Antonio; Xu, Nancy R [Old Dominion University; Mohan, Sumathy [UT Health Science Center at San Antonio

    2013-06-03T23:59:59.000Z

    In this study two novel approaches are proposed to investigate precisely the low dose low LET radiation damage and its effect on bystander cells in real time. First, a flow shear model system, which would provide us a near in vivo situation where endothelial cells in the presence of extra cellular matrix experiencing continuous flow shear stress, will be used. Endothelial cells on matri-gel (simulated extra cellular matrix) will be subjected to physiological flow shear (that occurs in normal blood vessels). Second, a unique tool (Single nano particle/single live cell/single molecule microscopy and spectroscopy; Figure A) will be used to track the molecular trafficking by single live cell imaging. Single molecule chemical microscopy allows one to single out and study rare events that otherwise might be lost in assembled average measurement, and monitor many target single molecules simultaneously in real-time. Multi color single novel metal nanoparticle probes allow one to prepare multicolor probes (Figure B) to monitor many single components (events) simultaneously and perform multi-complex analysis in real-time. These nano-particles resist to photo bleaching and hence serve as probes for unlimited timeframe of analysis. Single live cell microscopy allows one to image many single cells simultaneously in real-time. With the combination of these unique tools, we will be able to study under near-physiological conditions the cellular and sub-cellular responses (even subtle changes at one molecule level) to low and very low doses of low LET radiation in real time (milli-second or nano-second) at sub-10 nanometer spatial resolution. This would allow us to precisely identify, at least in part, the molecular mediators that are responsible of radiation damage in the irradiated cells and the mediators that are responsible for initiating the signaling in the neighboring cells. Endothelial cells subjected to flow shear (2 dynes/cm2 or 16 dynes/cm2) and exposed to 0.1, 1 and 10 cGy on coverslips will be examined for (a) low LET radiation-induced alterations of cellular function and its physiological relevance in real time; and (b) radiation damage triggered bystander effect on the neighboring unirradiated cells. First, to determine the low LET radiation induced alteration of cellular function we will examine: (i) the real time transformation of single membrane transporters in single living cells; (ii) the pump efficiency of membrane efflux pump of live cells in real time at the molecular level; (iii) the kinetics of single-ligand receptor interaction on single live cell surface (Figure C); and (iv) alteration in chromosome replication in living cell. Second, to study the radiation triggered bystander responses, we will examine one of the key signaling pathway i.e. TNF- alpha/NF-kappa B mediated signaling. TNF-alpha specific nano particle sensors (green) will be developed to detect the releasing dynamics, transport mechanisms and ligand-receptor binding on live cell surface in real time. A second sensor (blue) will be developed to simultaneously monitor the track of NF-kB inside the cell. The proposed nano-particle optics approach would complement our DOE funded study on biochemical mechanisms of TNF-alpha- NF-kappa B-mediated bystander effect.

  13. Kalman Filter Methods for Real-time Frequency and Mode Number Estimation of MHD Activity in Tokamak Plasmas

    E-Print Network [OSTI]

    Kalman Filter Methods for Real-time Frequency and Mode Number Estimation of MHD Activity in Tokamak Plasmas

  14. Real-Time Magnetic Field Pitch Angle Estimation with a Motional Stark Effect Diagnostic Using Kalman Filtering

    E-Print Network [OSTI]

    Real-Time Magnetic Field Pitch Angle Estimation with a Motional Stark Effect Diagnostic Using Kalman Filtering

  15. New Signal Processing Methods and Information Technologies for the Real Time Control of JET Reactor Relevant Plasmas

    E-Print Network [OSTI]

    New Signal Processing Methods and Information Technologies for the Real Time Control of JET Reactor Relevant Plasmas

  16. Design and Implementation of a Real-time Spray Cooling Control System for Continuous Casting of Thin Steel Slabs

    E-Print Network [OSTI]

    Thomas, Brian G.

    @uiuc.edu Key words: Continuous casting, Secondary spray cooling, Real-time control, Heat Transfer Model

  17. The BEST scheduler for integrated processing of best-e ort and soft real-time processes

    E-Print Network [OSTI]

    Miller, Ethan L.

    operating systems do not directly support the scheduling needs of soft real-time multimedia applications that it is possible to robustly execute soft real-time applications on best-e#11;ort systems. In particular, we estimates. Like most soft real-time systems, the DQM system has several issues that limit its ultimate

  18. MIDWEST ISO CO-OPTIMIZATION BASED REAL-TIME DISPATCH AND PRICING OF ENERGY AND ANCILLARY SERVICES

    E-Print Network [OSTI]

    Tesfatsion, Leigh

    day-ahead counterpart, real-time locational marginal prices (LMP) are calculated every fiveMIDWEST ISO CO-OPTIMIZATION BASED REAL-TIME DISPATCH AND PRICING OF ENERGY AND ANCILLARY SERVICES-time dispatch and pricing. The RT SCED formulation at the core of the real-time dispatch and pricing market

  19. Towards Real-Time High Performance Computing For Power Grid Analysis

    SciTech Connect (OSTI)

    Hui, Peter SY; Lee, Barry; Chikkagoudar, Satish

    2012-11-16T23:59:59.000Z

    Real-time computing has traditionally been considered largely in the context of single-processor and embedded systems, and indeed, the terms real-time computing, embedded systems, and control systems are often mentioned in closely related contexts. However, real-time computing in the context of multinode systems, specifically high-performance, cluster-computing systems, remains relatively unexplored. Imposing real-time constraints on a parallel (cluster) computing environment introduces a variety of challenges with respect to the formal verification of the system's timing properties. In this paper, we give a motivating example to demonstrate the need for such a system--- an application to estimate the electromechanical states of the power grid--- and we introduce a formal method for performing verification of certain temporal properties within a system of parallel processes. We describe our work towards a full real-time implementation of the target application--- namely, our progress towards extracting a key mathematical kernel from the application, the formal process by which we analyze the intricate timing behavior of the processes on the cluster, as well as timing measurements taken on our test cluster to demonstrate use of these concepts.

  20. Contrasting real-time dynamics with screening phenomena at finite temperature

    SciTech Connect (OSTI)

    Huang, S.; Lissia, M. [Center for Theoretical Physics, Laboratory for Nuclear Science and Department of Physics, Massachusetts Institute of Technology, Cambridge, Massachusetts 0219] [Center for Theoretical Physics, Laboratory for Nuclear Science and Department of Physics, Massachusetts Institute of Technology, Cambridge, Massachusetts 0219; [Department of Physics, FM-15, University of Washington, Seattle, Washington 98195 (United States); [Istituto Nazionale di Fisica Nucleare, via Ada Negri 18, I-09127 Cagliari (Italy); [Dipartimento di Fisica dell`Universita di Cagliari, I-09124 Cagliari (Italy)

    1996-06-01T23:59:59.000Z

    We discuss the interpretation of Euclidean correlation functions at finite temperature ({ital T}) and their relationship with the corresponding real-time Green{close_quote}s functions. The soluble (2+1)-dimensional Gross-Neveu model in the large-{ital N} limit is used throughout as a working example. First, the real-time bound state, identified as an elementary excitation at finite {ital T}, is solved. The bound state mass, the dispersion relation at low momenta, the coupling constant, and decay constant are calculated. To characterize the structure of the bound state the on-shell form factor is carefully introduced and calculated. Then we examine the corresponding screening state and contrast the screening mass, coupling constant, decay constant, and the screening Bethe-Salpeter amplitude with the real-time quantities. We find that, although they can be used as qualitative indicators in the low-{ital T} regime, the screening states at finite {ital T} in general do not reflect the properties of the corresponding real-time bound states. In addition, other relevant issues, such as the subtlety of the real-time manifestation of conservation laws due to some internal symmetries at {ital T}{ne}0, the temperature dependence of the pseudoscalar spectral function and its sum rule, and the high-{ital T} limit of the screening state and its implications to the dimensional reduction, are also discussed in detail. {copyright} {ital 1996 The American Physical Society.}

  1. Storm Water Individual Permit.

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    information meeting to discuss the biannual update on the NPDES Storm Water Individual Permit. Wednesday, January 22, 2014 5:30 p.m. Cities of Gold Conference Center 10 Cities of...

  2. Proceedings First International Workshop on Rewriting Techniques for Real-Time Systems

    E-Print Network [OSTI]

    lveczky, Peter Csaba

    2010-01-01T23:59:59.000Z

    This volume contains the proceedings of the First International Workshop on Rewriting Techniques for Real-Time Systems (RTRTS 2010), held in Longyearbyen, Spitsbergen, on April 6-9, 2010. The aim of the workshop is to bring together researchers with an interest in the use of rewriting-based techniques (including rewriting logic) and tools for the modeling, analysis, and/or implementation of real-time and hybrid systems, and to give them the opportunity to present their recent works, discuss future research directions, and exchange ideas. The topics of the workshop comprise, but are not limited to: methods and tools supporting rewriting-based modeling and analysis of real-time and hybrid systems, and extensions of such systems; use of rewriting techniques to provide rigorous support for model-based software engineering of timed systems; applications and case studies; and comparison with other formalisms and tools.

  3. Real-time capable first principle based modelling of tokamak turbulent transport

    E-Print Network [OSTI]

    Breton, S; Felici, F; Imbeaux, F; Aniel, T; Artaud, J F; Baiocchi, B; Bourdelle, C; Camenen, Y; Garcia, J

    2015-01-01T23:59:59.000Z

    A real-time capable core turbulence tokamak transport model is developed. This model is constructed from the regularized nonlinear regression of quasilinear gyrokinetic transport code output. The regression is performed with a multilayer perceptron neural network. The transport code input for the neural network training set consists of five dimensions, and is limited to adiabatic electrons. The neural network model successfully reproduces transport fluxes predicted by the original quasilinear model, while gaining five orders of magnitude in computation time. The model is implemented in a real-time capable tokamak simulator, and simulates a 300s ITER discharge in 10s. This proof-of-principle for regression based transport models anticipates a significant widening of input space dimensionality and physics realism for future training sets. This aims to provide unprecedented computational speed coupled with first-principle based physics for real-time control and integrated modelling applications.

  4. A TMS320C30 based real time data acquisition system

    E-Print Network [OSTI]

    Shahrier, Sharif Mohammad

    1992-01-01T23:59:59.000Z

    A TMS320C30 BASED REAL TIME DATA ACQIJISITION SYSTEM A Thesis by SHARIF MOHAMMAD SHAHRIER Submitted to the Office of Graduate Studies of Texa, s A & M Hniversity in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE... August 1992 Major Subject: Electrical Engineering A TMS320C30 BASED REAL TIME DATA ACQUISITION SYSTEM A Thesis by SHARIF MOHAMMAD SHAHRIER Approved as to style and content by: B. Don Russell (Chair of Co ittee) 1 Bar G. ouglass ember) z-r . es...

  5. A distributed hard real-time Java system for high mobility components

    E-Print Network [OSTI]

    Rho, Sangig

    2005-02-17T23:59:59.000Z

    -defined services either to a client program (which can in turn be a component) or to other components. Besides their well-defined ser- vice interface, components are opaque: They do not make internal implementation details available to their environment. Component... for the exported services: The components keep the information of real-time properties for the exported ser- vices rather than inheriting those from clients in the component declared real-time property model. As a result, clients cannot affect how the workload...

  6. System, device, and methods for real-time screening of live cells, biomarkers, and chemical signatures

    DOE Patents [OSTI]

    Sundaram, S Kamakshi [Richland, WA; Riley, Brian J [West Richland, WA; Weber, Thomas J [Richland, WA; Sacksteder, Colette A [West Richland, WA; Addleman, R Shane [Benton City, WA

    2011-06-07T23:59:59.000Z

    An ATR-FTIR device and system are described that defect live-cell responses to stimuli and perturbations in real-time. The system and device can monitor perturbations resulting from exposures to various physical, chemical, and biological materials in real-time, as well as those sustained over a long period of time, including those associated with stimuli having unknown modes-of-action (e.g. nanoparticles). The device and system can also be used to identify specific chemical species or substances that profile cellular responses to these perturbations.

  7. Real-time, single-step bioassay using nanoplasmonic resonator with ultra-high sensitivity

    DOE Patents [OSTI]

    Zhang, Xiang; Ellman, Jonathan A; Chen, Fanqing Frank; Su, Kai-Hang; Wei, Qi-Huo; Sun, Cheng

    2014-04-01T23:59:59.000Z

    A nanoplasmonic resonator (NPR) comprising a metallic nanodisk with alternating shielding layer(s), having a tagged biomolecule conjugated or tethered to the surface of the nanoplasmonic resonator for highly sensitive measurement of enzymatic activity. NPRs enhance Raman signals in a highly reproducible manner, enabling fast detection of protease and enzyme activity, such as Prostate Specific Antigen (paPSA), in real-time, at picomolar sensitivity levels. Experiments on extracellular fluid (ECF) from paPSA-positive cells demonstrate specific detection in a complex bio-fluid background in real-time single-step detection in very small sample volumes.

  8. Real Time Pricing as a Default or Optional Service for C&I Customers: A Comparative Analysis of Eight Case Studies

    E-Print Network [OSTI]

    Barbose, Galen; Goldman, Charles; Bharvirkar, Ranjit; Hopper, Nicole; Ting, Michael; Neenan, Bernie

    2005-01-01T23:59:59.000Z

    Load Response Program Real Time Option is a unique examplePJM Economic LRP Real Time Option, PJM Emergency LRPPJM Economic LRP Real Time Option PowerShare QuoteOption

  9. DECENTRALIZED REAL-TIME MANAGEMENT LARGELY UNPREDICTABLE POWER NEEDS AND SUPPLY

    E-Print Network [OSTI]

    Wedde, Horst F.

    of unpredictable power need and supply situations. We model a representative scenario to explain variousDECENTRALIZED REAL-TIME MANAGEMENT OF LARGELY UNPREDICTABLE POWER NEEDS AND SUPPLY H. F. Wedde*, F technologies based on solar or wind power, or on renewable energy sources, is an adequate management

  10. Toward Real-Time Simulation of Physics Based Lithium-Ion Battery Models

    E-Print Network [OSTI]

    Subramanian, Venkat

    Toward Real-Time Simulation of Physics Based Lithium-Ion Battery Models Venkat R. Subramanian Technological University, Cookeville, Tennessee 38505, USA Recent interest in lithium-ion batteries for electric on the computational efficiency of lithium-ion battery models. This paper presents an effective approach to simulate

  11. Real-time observation of lithium fibers growth inside a nanoscale lithium-ion battery

    E-Print Network [OSTI]

    Endres. William J.

    Real-time observation of lithium fibers growth inside a nanoscale lithium-ion battery Hessam.1063/1.3643035] Lithium-ion batteries are of great interest due to their high energy density, however, various safety properties, many applications are pos- sible.10,11 One is the electrolyte of the lithium-ion batteries, where

  12. Real-time Rendering of Complex Vector Data on 3d Terrain Models

    E-Print Network [OSTI]

    Behnke, Sven

    Real-time Rendering of Complex Vector Data on 3d Terrain Models M. Schneider, M. Guthe, and R of buildings, streets and runway (from left to right). Abstract. In this paper we present a hybrid technique model. The first part of this hybrid technique is a texture-based approach that is especially suited

  13. Real-Time BRDF Editing in Complex Lighting Aner Ben-Artzi

    E-Print Network [OSTI]

    O'Brien, James F.

    geometry and lighting, and we render the BRDFs using their final placement within a scene using complexReal-Time BRDF Editing in Complex Lighting Aner Ben-Artzi Columbia University Ryan Overbeck, complex illumination. All-frequency effects (ranging from near-mirror reflections and hard shadows

  14. Real-time Scheduling of periodic tasks in a monoprocessor system with rechargeable energy storage

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Real-time Scheduling of periodic tasks in a monoprocessor system with rechargeable energy storage-time computing system that is powered through a renewable energy storage device. In this context, two constraints for the properties of the energy source, capacity of the energy storage as well as energy consumption of the tasks

  15. Developing a Real-Time Identify-and-Locate System for the Blind

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    Developing a Real-Time Identify-and-Locate System for the Blind Gemstone Team Vision 1 , Bobby Bobo Lighthouse for the Blind 3 University of Maryland Institute for Advanced Computer Studies 4 University to the blind in the foreseeable future. But despite the rapid advances in computer hardware and vi- sion

  16. Mauve: a Component-based Modeling Framework for Real-time Analysis of Robotic Applications

    E-Print Network [OSTI]

    Mauve: a Component-based Modeling Framework for Real-time Analysis of Robotic Applications Charles paradigm for robotic software devel- opment [2], applied in many applications [3], [4], [5], [6]. Resulting validation of the robotic application, by directly analysing the architecture specification, and limiting

  17. A Framework for Integrating real-time MRI with Robot Control: Application to Simulated

    E-Print Network [OSTI]

    Azevedo, Ricardo

    1 A Framework for Integrating real-time MRI with Robot Control: Application to Simulated applications in urology [2], cardiac ablation with fluoroscopy guided Sensei robotic catheter system (Hansen interventional paradigms including image-guided robot assistance. Most often the use of an intraoperative imaging

  18. Compact real-time 2-D gradient-based analog VLSI motion sensor

    E-Print Network [OSTI]

    Deutschmann, Rainer

    the sensor might be favourably applied in industrial applications. Keywords: analog VLSI, motion sensor selectivity even for very low contrast input is demonstrated. As application it is shown how the pixel, smart vision sensor, parallel image processing, real-time computation, optical ow, machine vision, robot

  19. An efficient algorithm for real-time estimation and prediction of dynamic OD tables

    E-Print Network [OSTI]

    Bierlaire, Michel

    An efficient algorithm for real-time estimation and prediction of dynamic OD tables M. Bierlaire and F. Crittin February, 2002 Abstract The problem of estimating and predicting Origin-Destination (OD more intricate. We consider here a least-square modeling approach for solving the OD estimation

  20. Software-only Multiple Variable Length Decoding for Real-Time Video on MDSP*

    E-Print Network [OSTI]

    Chaudhary, Vipin

    3.44 Software-only Multiple Variable Length Decoding for Real- Time Video on MDSP* Ganesh Yadav', R Inc. Abstract-We present the multiple variable length decode algorithm implemented in most video mechanism. I. INTRODUCTION Variable Length Decoding (VLD) is the most important part of the video standards

  1. REAL-TIME INTERACTIVE MUSICAL SYSTEMS: AN OVERVIEW A.N.Robertson

    E-Print Network [OSTI]

    Robertson, Andrew

    REAL-TIME INTERACTIVE MUSICAL SYSTEMS: AN OVERVIEW A.N.Robertson Centre for Digital Music of developments towards inter- active musical systems. A description of an interactive system is given and we at the history of research into the problem of automatic accompaniment, discuss a variety of current interactive

  2. Adaptive Connection Admission Control for Mission Critical Real-Time Communication Networks

    E-Print Network [OSTI]

    Bettati, Riccardo

    admission control in real-time communication networks. Much of the existing work on connection admission in resource availability. We take an innovative approach: First, we allow an application to specify QoS over include supervisory command and control of defense systems, manufacturing plants, etc. The success

  3. Adaptive Connection Admission Control for Mission Critical Real-Time Communication Networks

    E-Print Network [OSTI]

    Sahoo, Anirudha

    in real-time communication networks. Much of the existing work on connection admission control (CAC availability. We take an innovative approach: First, we allow an application to specify QoS in a range, rather include supervisory command and control of defense systems, manufacturing plants, etc. The success

  4. A REAL TIME 3D VISUALIZATION PROTOTYPE FOR INTERVENTIONAL MAGNETIC RESONANCE IMAGING

    E-Print Network [OSTI]

    Schumann, Heidrun

    A REAL TIME 3D VISUALIZATION PROTOTYPE FOR INTERVENTIONAL MAGNETIC RESONANCE IMAGING JENS FISCHER­invasive examinations. This prototype allows simultaneous visualization of three different types of data: a 3D­Magnetic@informatik.uni­rostock.de Abstract: This paper describes a prototype of a visualization system which is designed to support

  5. Real-time fracture monitoring in Engineered Geothermal Systems with seismic waves

    SciTech Connect (OSTI)

    Jose A. Rial; Jonathan Lees

    2009-03-31T23:59:59.000Z

    As proposed, the main effort in this project is the development of software capable of performing real-time monitoring of micro-seismic activity recorded by an array of sensors deployed around an EGS. The main milestones are defined by the development of software to perform the following tasks: Real-time micro-earthquake detection and location Real-time detection of shear-wave splitting Delayed-time inversion of shear-wave splitting These algorithms, which are discussed in detail in this report, make possible the automatic and real-time monitoring of subsurface fracture systems in geothermal fields from data collected by an array of seismic sensors. Shear wave splitting (SWS) is parameterized in terms of the polarization of the fast shear wave and the time delay between the fast and slow shear waves, which are automatically measured and stored. The measured parameters are then combined with previously measured SWS parameters at the same station and used to invert for the orientation (strike and dip) and intensity of cracks under that station. In addition, this grant allowed the collection of seismic data from several geothermal regions in the US (Coso) and Iceland (Hengill) to use in the development and testing of the software.

  6. Real-Time Queues in Heavy Trac with Earliest-Deadline-First Queue Discipline

    E-Print Network [OSTI]

    , teleconference or movie). Real-time computer systems also control much of modern tech- nology, for example aspects of modern manufactur- ing facilities. Computerized control systems must receive and react to state engines and braking systems in automobiles, all avionic systems (including air tra?c control) and all

  7. Real-Time Systems, 24, 153169, 2003 # 2003 Kluwer Academic Publishers. Manufactured in The Netherlands.

    E-Print Network [OSTI]

    Liu, Xue

    , University of Illinois at Urbana-Champaign Abstract. Many real-time systems, such as manufacturing plants, have long life cycles. To enable the realization of technological innovations and to mitigate the risk and cost of bringing new control technologies into functioning systems, ¯exible and reliable real

  8. Advanced Kalman Filter for Real-Time Responsiveness in Complex Systems

    SciTech Connect (OSTI)

    Welch, Gregory Francis [UNC-Chapel Hill/University of Central Florida] [UNC-Chapel Hill/University of Central Florida; Zhang, Jinghe [UNC-Chapel Hill/Virginia Tech] [UNC-Chapel Hill/Virginia Tech

    2014-06-10T23:59:59.000Z

    Complex engineering systems pose fundamental challenges in real-time operations and control because they are highly dynamic systems consisting of a large number of elements with severe nonlinearities and discontinuities. Todays tools for real-time complex system operations are mostly based on steady state models, unable to capture the dynamic nature and too slow to prevent system failures. We developed advanced Kalman filtering techniques and the formulation of dynamic state estimation using Kalman filtering techniques to capture complex system dynamics in aiding real-time operations and control. In this work, we looked at complex system issues including severe nonlinearity of system equations, discontinuities caused by system controls and network switches, sparse measurements in space and time, and real-time requirements of power grid operations. We sought to bridge the disciplinary boundaries between Computer Science and Power Systems Engineering, by introducing methods that leverage both existing and new techniques. While our methods were developed in the context of electrical power systems, they should generalize to other large-scale scientific and engineering applications.

  9. FLUORESCENCE AND FIBER-OPTICS BASED REAL-TIME THICKNESS SENSOR FOR DYNAMIC LIQUID FILMS

    E-Print Network [OSTI]

    Narain, Amitabh

    /analyzed the incident reflected waves to identify and measure the total transit time of the sound wave (of known wave-speed1 FLUORESCENCE AND FIBER-OPTICS BASED REAL-TIME THICKNESS SENSOR FOR DYNAMIC LIQUID FILMS T. W. Ng/disadvantages of many known liquid film thickness sensing devices (viz. conductivity probes, reflectance based fiber

  10. Integrating Redundancy Management and Real-time Services for Ultra Reliable Control Systems

    E-Print Network [OSTI]

    Younis, Mohamed

    that their functional semantic is coupled with temporal correctness. Not only the embedded computer needs to perform with that algorithm. Some of the real-time applications are also safety-critical and require high level of reliability and fault-tolerance to ensure uninterrupted service that might risk the safety of the system. Avionics

  11. DISTRIBUTED REAL-TIME TASK MONITORING IN THE SAFETY-CRITICAL SYSTEM MELODY

    E-Print Network [OSTI]

    Wedde, Horst F.

    -critical systems (such as nuclear power plants, distributed cooperation of autonomous robots in Outer Space that are typi- cally unpredictable, a very high amount of adaptability of sys- tem functions is demanded. SafetyDISTRIBUTED REAL-TIME TASK MONITORING IN THE SAFETY-CRITICAL SYSTEM MELODY Horst F. Wedde, Jon A

  12. A Brain-to-Brain Interface for Real-Time Sharing of Sensorimotor Information

    E-Print Network [OSTI]

    Indiana University

    A Brain-to-Brain Interface for Real-Time Sharing of Sensorimotor Information Miguel Pais-Vieira1 Safra International Institute for Neuroscience of Natal (ELS-IINN), RN 59066-060, Natal, Brazil. A brain-to-brain the brains of two rats. In this BTBI, an ``encoder'' rat performed sensorimotor tasks that required

  13. Fault Resilient Real-Time Design for NoC Architectures Christopher Zimmer, Frank Mueller

    E-Print Network [OSTI]

    Mueller, Frank

    @cs.ncsu.edu Abstract--Performance and time to market requirements cause many real-time designers to consider components-end handheld market and are also seeing increased use in the lower-end embedded control market. An example is the Freescale 8-core PowerPC P4080 that is being marketed in the power utility domain for control devices

  14. A Fault Observant Real-Time Embedded Design for Network-on-Chip Control Systems

    E-Print Network [OSTI]

    Mueller, Frank

    @cs.ncsu.edu ABSTRACT Performance and time to market requirements cause many real- time designers to consider components. Multi-core COTS processors are becoming increas- ingly used in the high-end handheld market and are also seeing in- creased use in the lower-end embedded control market. An exam- ple is the Freescale 8-core

  15. CSEM WP 136 Is Real-Time Pricing Green?: The Environmental

    E-Print Network [OSTI]

    California at Berkeley. University of

    CSEM WP 136 Is Real-Time Pricing Green?: The Environmental Impacts of Electricity Demand Variance Stephen P. Holland and Erin T. Mansur August 2004 This paper is part of the Center for the Study of Energy Markets (CSEM) Working Paper Series. CSEM is a program of the University of California Energy Institute

  16. Integrating Authored and Real-Time Social Media Pei-Yu (Peggy) Chi

    E-Print Network [OSTI]

    Lieberman, Henry

    introduces a new style of social media combining aspects of the real-time and authored styles explosion in the popularity of social media, giving people new ways of connecting and forming relationships of this paper is to introduce a new kind of hybrid of these two kinds of social media, which we refer to

  17. CLOUD CHAMBER: A PERFORMANCE INVOLVING REAL TIME TWO-WAY INTERACTION BETWEEN SUBATOMIC RADIOACTIVE

    E-Print Network [OSTI]

    Miranda, Eduardo Reck

    " by the radiation-generated ion patterns in the glass chamber. If John plays in one way the ion particlesCLOUD CHAMBER: A PERFORMANCE INVOLVING REAL TIME TWO-WAY INTERACTION BETWEEN SUBATOMIC RADIOACTIVE, Harwell, Oxford, UK ABSTRACT ,,Cloud Chamber is a live performance created by composer Alexis Kirke

  18. Reliable Distributed Real-time and Embedded Systems Through Safe Middleware Adaptation

    E-Print Network [OSTI]

    MAT), which opportunistically leverages the available slack in the over-provisioned resources of individual resource monitoring framework that can pinpoint in real-time the available slack in the system that is used over-provisioned resources to deal with worst-case failure scenarios. The formation of the systems

  19. Improving Soft Real-Time Performance Through Better Slack Reclaiming Caixue Lin and Scott A. Brandt

    E-Print Network [OSTI]

    Brandt, Scott A.

    -real-time applications depends upon the effective distribution of dynamic slack--reserved, but unused resources resources than they have reserved, creat- ing dynamic slack--reserved but unused resources1. Simi- larly resources than they have reserved. The efficient reclamation and redistri- bution of dynamic slack

  20. ROBUST CONTROL ANALYSIS USING REAL-TIME IMPLEMENTATION OF A HYBRID FUEL CELL POWER GENERATION SYSTEM

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    ROBUST CONTROL ANALYSIS USING REAL-TIME IMPLEMENTATION OF A HYBRID FUEL CELL POWER GENERATION the control of two identical boost power converters. For the closed-loop control a previously proposed proposed by the authors in former works. The control actuators are the duty cycles of the boost power

  1. A 3D reconstruction from real-time stereoscopic images using GPU

    E-Print Network [OSTI]

    Boyer, Edmond

    scene models in image- based rendering. Stereovision involves two processes: the binocular of features methods must be designed to establish the correct correspondence between images features in real-time 3D reconstruction feedback. Examples include machine vision in robotics task where feedback for autonomous control

  2. Optimizing a combined WCET-WCEC problem in instruction fetching for real-time systems

    E-Print Network [OSTI]

    Zaragoza, Universidad de

    in systems with severe power-supply limitations. In this paper we study several memory architectures using that methodologies testing such optimizations at design time could be very helpful to provide a precise system set-up combined time and energy optimization models for real-time multitasking systems. Each task is modeled using

  3. A practical post-processing technique for real-time block-based coding system

    E-Print Network [OSTI]

    Chan, Chris Y. H.

    1 A practical post-processing technique for real-time block-based coding system Yuk-Hee Chan, Sung to restore the images encoded with block-based compression standards such as JPEG. This method classi es with the reported post-processing methods. Keywords| I. Introduction THE Joint Photographic Experts Group JPEG im

  4. A Real-Time Decision Support System for High Cost Oil-Well Drilling Operations

    E-Print Network [OSTI]

    Aamodt, Agnar

    A Real-Time Decision Support System for High Cost Oil-Well Drilling Operations Odd Erik Gundersen In this paper we present DrillEdge - a commercial and award winning software system that monitors oil-well drilling operations in order to reduce non-productive time (NPT). DrillEdge utilizes case-based reasoning

  5. Submitted to: Multimedia Systems, pending. Real Time Video Analysis for Automatic Archive Creation

    E-Print Network [OSTI]

    Kansas, University of

    Submitted to: Multimedia Systems, pending. Real Time Video Analysis for Automatic Archive Creation are indexed based on their captions and stored in a multimedia database. A client-server-based graphical user in video compression and transmission, the use of digital video in multimedia systems and over the Internet

  6. Real-time State Estimation on Micro-grids Ying Hu, Anthony Kuh, Aleksandar Kavcic

    E-Print Network [OSTI]

    Kavcic, Aleksandar

    . In addition, the proposed graphical model can integrate new models for solar/wind cor- relation that will help been made on the individual feeder circuit estimating the customer load characteristics. One reason for this lack of study is that there is hardly any real-time load measure- ments for individual customers

  7. Local Flaps: A Real-Time Finite Element Based Solution to the Plastic Surgery

    E-Print Network [OSTI]

    Liblit, Ben

    Local Flaps: A Real-Time Finite Element Based Solution to the Plastic Surgery Defect Puzzle fundamental challenges in plastic surgery is the alter- ation of the geometry and topology of the skin for the patient after the procedure is completed. The plastic surgeon must look at the defect created

  8. Security-Aware Resource Allocation for Real-Time Parallel Jobs on Homogeneous

    E-Print Network [OSTI]

    Qin, Xiao

    processing systems [2], med- ical electronics [9], aircraft control [1], and scientific parallel computing [6 a system framework, security overhead, and parallel applications with deadline and security constraintsSecurity-Aware Resource Allocation for Real-Time Parallel Jobs on Homogeneous and Heterogeneous

  9. An Optimal Real-Time Scheduling Algorithm for Multiprocessors Hyeonjoong Cho

    E-Print Network [OSTI]

    Ravindran, Binoy

    ) are becoming more attractive for em- bedded systems, primarily because major processor manu- facturers (Intel multiprocessor platform support -- e.g., QNX Neutrino is now available for a vari- ety of SMP chips [12 platforms for embedded systems remains nascent. One unique aspect of multiprocessor real-time schedul- ing

  10. Multiprocessor Extensions to RealTime Calculus Hennadiy Leontyev # , Samarjit Chakraborty + and James H. Anderson #

    E-Print Network [OSTI]

    Anderson, James

    @tum.de Abstract---Many embedded platforms consist of a hetero geneous collection of processing elements, memory for modeling and analyzing such platforms are of interest. In prior work, the realtime calculus framework has for calculating such bounds that is applicable to a large family of fixed jobpriority schedulers. The utility

  11. Power Management for Real-Time Embedded Systems on Block-Partitioned Multicore Platforms

    E-Print Network [OSTI]

    Zhu, Dakai

    Power Management for Real-Time Embedded Systems on Block-Partitioned Multicore Platforms Xuan Qi. For the mobile and portable devices, battery is one dominant constraint with fixed energy budget. For the high, it is imperative to develop power management schemes for systems on multicore platforms. However, applying

  12. A Hierarchical Scheduling Model for Component-Based Real-Time Systems Jose L. Lorente

    E-Print Network [OSTI]

    Lipari, Giuseppe

    of abstract computing platform on which each component is executed. Then, we transform the system methodologies for real-time em- bedded systems is now moving towards component-based approaches. This trend can be analyzed with classical fixed pri- ority schedulability analysis. Similar design methodologies have been

  13. Real-Time Deep-Ocean Tsunami Measuring, Monitoring, and Reporting System

    E-Print Network [OSTI]

    identified the requirements of the tsunami measurement system through evolution in both technologyReal-Time Deep-Ocean Tsunami Measuring, Monitoring, and Reporting System: The NOAA DART II the system components that make up the second-generation Deep-Ocean Assessment and Reporting of Tsunamis

  14. REAL-TIME DUAL-MICROPHONE SPEECH ENHANCEMENT USING FIELD PROGRAMMABLE GATE ARRAYS

    E-Print Network [OSTI]

    Sheikholeslami, Ali

    REAL-TIME DUAL-MICROPHONE SPEECH ENHANCEMENT USING FIELD PROGRAMMABLE GATE ARRAYS David Halupka@eecg}.toronto.edu ABSTRACT This paper discusses an implementation of a dual- microphone phase-based speech enhancement or irrelevant conversations, are present has fueled research interest in the areas of speech enhancement

  15. A Study of Real-Time Identification and Monitoring of Barge-Carried Hazardous Commodities

    E-Print Network [OSTI]

    A Study of Real-Time Identification and Monitoring of Barge-Carried Hazardous Commodities Yangrong 37831 Abstract-- In response to increased terrorist threats related to hazardous material movements and field test a prototype system that provides more accurate, uniform, and timely data on hazardous

  16. REAL-TIME, WEB BASED ENERGY MONITORING SYSTEM FOR A SOLAR ACADEMIC BUILDING John H. Scofield

    E-Print Network [OSTI]

    Scofield, John H.

    Field Station incorporates passive solar cooling and active solar heating, maximizes ergonomicREAL-TIME, WEB BASED ENERGY MONITORING SYSTEM FOR A SOLAR ACADEMIC BUILDING John H. Scofield. The Leslie Shao-ming Sun Field Station is a 9,800 sf single- story building designed to help Jasper Ridge

  17. Real-time processing of a long perimeter fiber optic intrusion system

    E-Print Network [OSTI]

    Snider, William Timothy

    2009-09-30T23:59:59.000Z

    This thesis reports on recent advances made in real-time intruder detection for an intrusion system developed at Texas A&M University that utilizes a phase-sensitive optical time-domain reflectometer. The system uses light pulses from a highly...

  18. Robust control under weakened real-time constraints Patrick Jocelyn Andrianiaina, Alexandre Seuret and Daniel Simon

    E-Print Network [OSTI]

    Boyer, Edmond

    of concerns between control design and implementation, [1], [2]. On one hand, traditional control design) is precisely known. This assumption has served the separation between control and scheduling designs, but leads real-time systems design methods and associated analysis tools do not provide a model flexible enough

  19. Pricing mechanism for real-time balancing in regional electricity markets

    E-Print Network [OSTI]

    de Weerdt, Mathijs

    an econometric analysis of the regulating power market on the Nordic power exchange Nord Pool, and Moller et al , Wolfgang Ketter , and John Collins Abstract We consider the problem of designing a pricing mechanism for precisely controlling the real-time balance in electricity markets, where retail brokers aggregate

  20. DEZENT: A Safety-Critical Real-Time Approach Decentralized Electric Power Management

    E-Print Network [OSTI]

    Wedde, Horst F.

    for establishing technologies based on solar or wind power, or on renewable energy sources, is an adequate- selves to the producer/ consumer problems within a balance responsibility entity, i.e. a 10 kV power areaDEZENT: A Safety-Critical Real-Time Approach for Decentralized Electric Power Management H. F

  1. Analysis of Competitive Electricity Markets under a New Model of Real-Time Retail Pricing with

    E-Print Network [OSTI]

    Bhatia, Sangeeta

    Analysis of Competitive Electricity Markets under a New Model of Real-Time Retail Pricing with Ex for Information and Decision Systems, Massachusetts Institute of Technology, Cambridge, MA, USA {mardavij, mdrine loop system. Under this pricing mechanism, electricity is priced at the exante price (calculated based

  2. A Real-Time Navigation Architecture for Automated Vehicles in Urban Environments

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    A Real-Time Navigation Architecture for Automated Vehicles in Urban Environments Gang Chen presents a novel navigation architec- ture for automated car-like vehicles in urban environments. Motion with fully automated driving capabilities. A fleet of such vehicles would form a managed transportation

  3. Improving Building Performance at Urban Scale with a Framework for Real-time Data Sharing

    SciTech Connect (OSTI)

    Pang, Xiufeng; Hong, Tianzhen; Piette, Mary Ann

    2013-06-03T23:59:59.000Z

    This paper describes work in progress toward an urban-scale system aiming to reduce energy use in neighboring buildings by providing three components: a database for accessing past and present weather data from high quality weather stations; a network for communicating energy-saving strategies between building owners; and a set of modeling tools for real-time building energy simulation.

  4. Real-time, Photo-realistic, Physically Based Rendering of Fine Scale Human Skin Structure

    E-Print Network [OSTI]

    Haro, Antonio

    structure samples, build models of fine scale structure production, and then render this detail usingReal-time, Photo-realistic, Physically Based Rendering of Fine Scale Human Skin Structure Antonio, which is clearly visible in close-up shots in a film or game. Methods that rely on simple texture

  5. EDF Option for Scheduling Real-Time Jobs in Energy Harvesting Systems

    E-Print Network [OSTI]

    Boyer, Edmond

    exploiting both the processor capacity and the available ambient energy. Main definitions Definition 1 and profile of the energy produced by the source. #12;Definition 4: An online scheduling algorithmEDF Option for Scheduling Real-Time Jobs in Energy Harvesting Systems Maryline CHETTO IRCCy

  6. IEEE TRANSACTIONS ON KNOWLEDGE AND DATA ENGINEERING 1 Estimating and Enhancing Real-Time Data

    E-Print Network [OSTI]

    Kang, Kyoung-Don

    in a timely manner using fresh data reflecting the current market status or target positions [2]. In e--It is essential to process real-time data service requests such as stock quotes and trade transactions in a timely manner using fresh data, which represent the current real world phenomena such as the stock market status

  7. Criteria for Selection of a COTS Real-Time Operating System: a Survey

    E-Print Network [OSTI]

    Beus-Dukic, Ljerka

    . The choices made for the criteria template used in our survey are briefly explained in the following sections1 Criteria for Selection of a COTS Real-Time Operating System: a Survey Ljerka Beus-Dukic School to provide the answers. The paper presents the results of this survey. The first section briefly describes

  8. Validation of the new real-time equilibrium code EQUINOX on JET and Tore Supra

    E-Print Network [OSTI]

    Faugeras, Blaise

    Validation of the new real-time equilibrium code EQUINOX on JET and Tore Supra D. Mazon1 , P. Lotte Nice Sophia-Antipolis, CNRS Parc Valrose 06108 Nice Cedex 02 France 3 Consorzio RFX ­ Associazione time equilibrium reconstruction code EQUINOX, which solves the Grad Shafranov equation, has been

  9. Real-time Prediction Learning for the Simultaneous Actuation of Multiple Prosthetic Joints

    E-Print Network [OSTI]

    Sutton, Richard S.

    into a prosthetic control system promises to enhance multi-joint prosthesis use by amputees. In this article, we with real-time prediction learning. We evaluate this new approach to control learning during the myoelectric learning may speed control policy acquisition, allow unsupervised adaptation in myoelectric controllers

  10. Dynamic Switching and Real-time Machine Learning for Improved Human Control of Assistive Biomedical Robots

    E-Print Network [OSTI]

    Sutton, Richard S.

    Dynamic Switching and Real-time Machine Learning for Improved Human Control of Assistive Biomedical Abstract-- A general problem for human-machine interaction occurs when a machine's controllable dimensions outnumber the control channels available to its human user. In this work, we examine one prominent example

  11. PILARSKI et al.: ADAPTIVE ARTIFICIAL LIMBS 1 Adaptive Artificial Limbs: A Real-time Approach

    E-Print Network [OSTI]

    Sutton, Richard S.

    with one or more actuators. Myoelectric limbs are therefore tightly coupled to a human user, with control--able-bodied subjects engaging in the myoelectric control of a robot arm, and an amputee participant's interactions for real-time prediction learning dur- ing myoelectric control. Our approach therefore represents

  12. Field Test to Demonstrate Real-Time In-Situ Detection of Volatile Organic Compounds

    E-Print Network [OSTI]

    Ho, Cliff

    1 Field Test to Demonstrate Real-Time In-Situ Detection of Volatile Organic Compounds Hazmat Spill Center, Nevada Test Site September 19-25, 2001 Clifford K. Ho Sandia National Laboratories Albuquerque-filled 55- gallon drum at the Hazmat Spill Center at the Nevada Test Site. Background and Objectives Tens

  13. Using Real-Time Three-Dimensional Ultrasound to Characterize Mitral Valve Motion

    E-Print Network [OSTI]

    Ayache, Nicholas

    Using Real-Time Three-Dimensional Ultrasound to Characterize Mitral Valve Motion Paul M. Novotnya results aim to fully characterize the four-dimensional (3D + time) movement of the mitral valve for better understanding of its behavior prior to surgical interventions, such as mitral valve repair. A behavior model

  14. A real-time hydrological model for flood prediction using GIS and the WWW

    E-Print Network [OSTI]

    Blackburn, Alan

    water distribution. The development of such a system would be particularly important outside of urban and spatial real-time, emergency decision support. Rather than discuss develop- ments in the modelling Computers, Environment and Urban Systems 27 (2003) 9­32 www.elsevier.com/locate/compenvurbsys 0198

  15. Author's personal copy Applications and usage of the real-time Neutron Monitor Database q

    E-Print Network [OSTI]

    Usoskin, Ilya G.

    in Astrophysics from Space (E), High-Energy Solar Particle Events ­ Past, Present, Future/Joint Scientific Event ­ UOULU, PL 3000, FIN-90014, Finland i Yerevan Physics Institute after A.I. Alikhanyan-ARAGATS, Alikhanyan in real-time mode. An important one will be the establishment of an Alert signal when dangerous solar

  16. Cover sheet Real-time health monitoring of historic buildings with wireless sensor networks

    E-Print Network [OSTI]

    Picco, Gian Pietro

    Cover sheet Title: Real-time health monitoring of historic buildings with wireless sensor networks of a wireless sensor network (WSN) in Torre Aquila, a 31 meter-tall medieval tower located in the city of Trento agreement. INTRODUCTION Wireless sensors and wireless sensing networks, due to their low installation cost

  17. Energy Saving Measures of Heating Network - Computerized Real-time Control System

    E-Print Network [OSTI]

    Zhang, J.

    2006-01-01T23:59:59.000Z

    a new system control theory, that is computerize the real-time frequency conversion control or area,time, mode of heat transformation and temperature grads. The aim of the new theory is promoting the efficiency of energy conversion and minimizing...

  18. Accurate Modeling and Prediction of Energy Availability in Energy Harvesting Real-Time Embedded Systems

    E-Print Network [OSTI]

    Qiu, Qinru

    Binghamton University, State University of New York Binghamton, New York, USA {jlu5, sliu5, qwu, qqiuAccurate Modeling and Prediction of Energy Availability in Energy Harvesting Real-Time Embedded}@binghamton.edu Abstract -- Energy availability is the primary subject that drives the research innovations in energy

  19. Energy Aware Dynamic Voltage and Frequency Selection for Real-Time Systems with Energy Harvesting

    E-Print Network [OSTI]

    Qiu, Qinru

    University, State University of New York Binghamton, New York 13902, USA {sliu5, qqiu, qwu problem and prolong the system operating duration, a new technology called energy harvesting, also knownEnergy Aware Dynamic Voltage and Frequency Selection for Real-Time Systems with Energy Harvesting

  20. QoS Measurement of Internet Real-Time Multimedia Services Wenyu Jiang, Henning Schulzrinne

    E-Print Network [OSTI]

    Yang, Junfeng

    QoS Measurement of Internet Real-Time Multimedia Services Wenyu Jiang, Henning Schulzrinne fwenyu,schulzrinneg@cs.columbia.edu Technical Report CUCS-015-99 Department of Computer Science Columbia University December 1999 Abstract Real the modeling and analysis of delay and loss. Our goal is to establish feasible metrics that can reliably

  1. Real Time Video Scene Detection and Classification John M. Gauch, Susan Gauch, Sylvain Bouix, Xiaolan Zhu

    E-Print Network [OSTI]

    Kansas, University of

    Real Time Video Scene Detection and Classification John M. Gauch, Susan Gauch, Sylvain Bouix (Video Indexing for Searching Over Networks) digital video library system has been developed in our and retrieval of digital video. This has motivated video library research at a number of institutions

  2. Real-Time Forecasting for the Antarctic: An Evaluation of the Antarctic Mesoscale Prediction System (AMPS)*

    E-Print Network [OSTI]

    Howat, Ian M.

    Real-Time Forecasting for the Antarctic: An Evaluation of the Antarctic Mesoscale Prediction System. MANNING AND JORDAN G. POWERS Mesoscale and Microscale Meteorology Division, National Center.S. Antarctic Program's field operations, the Antarctic Mesoscale Prediction System (AMPS) was implemented in Oc

  3. MSIP: A protocol for efficient handoffs of real-time multimedia sessions in mobile wireless scenarios

    E-Print Network [OSTI]

    Iyer, Sridhar

    infrastructure is to efficiently manage user mobility. Mobility is handled by Mobile IP (at the network layer in this paper, MSIP, is a combination of network and application layer mobility management models reducesMSIP: A protocol for efficient handoffs of real-time multimedia sessions in mobile wireless

  4. Rate and Loss Control for Video Transmission over UMTS using Real-Time Protocols

    E-Print Network [OSTI]

    Bouras, Christos

    Rate and Loss Control for Video Transmission over UMTS using Real-Time Protocols Antonios G focus on the design and implementation of a rate and loss control mechanism for monitoring the UMTS]. In addition, when two different applications are running together, the network should guarantee

  5. Real-Time Optical Characterization of Laser Oxidation Process in Bimetallic Direct Write Gray Scale Photomasks

    E-Print Network [OSTI]

    Chapman, Glenn H.

    density (OD), changes smoothly with increasing laser power, from ~3.0OD (unexposed) to developed capable of providing real time optical density and exposure power changes for the bimetallic thin) are exposed to laser light with power greater than its conversion threshold power, the thin film oxidizes

  6. Energy Metering for Free: Augmenting Switching Regulators for Real-Time Monitoring

    E-Print Network [OSTI]

    Energy Metering for Free: Augmenting Switching Regulators for Real-Time Monitoring Prabal Dutta of Technology Berkeley, CA 94720 Cambridge, MA 02139 Abstract We present iCount, a new energy meter design. For many systems that have a built-in switching regulator, adding a single wire between the regulator

  7. Comparative Application of Real-Time Verification Methods to an Automotive Architecture

    E-Print Network [OSTI]

    Ulm, Universitt

    to compare these tools in an appropriate way we have applied them to an automotive industry state of the art of these systems. Beyond that, the automotive industry has economical constraints. As a re- sult, the numberComparative Application of Real-Time Verification Methods to an Automotive Architecture Steffen

  8. Flexible Sensor Array Wraps Beating Hearts to Map Cardiac Activity in Real Time

    E-Print Network [OSTI]

    Rogers, John A.

    Flexible Sensor Array Wraps Beating Hearts to Map Cardiac Activity in Real Time By Jeremy Hsu Flexible Silicon Sensors Put this sensor on your heart and tell me it's all over University of Illinois Getting a cardiac map of the electrical activity coursing through a live, beating heart has proven

  9. Evaluation of Wireless Soft Real-Time Protocols Michael J. Markowski

    E-Print Network [OSTI]

    Sethi, Adarshpal

    Communication between current military real-time sys- tems and future interconnection of general purpose, embed was supported in part by the U.S. Department of the Army, Army Research Laboratory under Cooperative Agreement arises to interconnect these for high level coordination, it is not feasible, or even possible in many

  10. Characterization of folding the four-helix bundle protein Rop by real-time NMR

    E-Print Network [OSTI]

    Mochrie, Simon

    -loop-helix monomers. Protein folding moni- tored by stopped-flow fluorescence or CD exhibits biphasic kinetics when: protein folding/real-time NMR Introduction Rop is an RNA-binding protein that is involved in the regu of the effect on protein folding of the length of the connecting loop between the helices, led us to suggest

  11. DEVELOPMENT OF REAL TIME FLOOD PREDICTION CAPABILITIES IN PUERTO RICO TO EVALUATE UNCERTAINTIES

    E-Print Network [OSTI]

    Gilbes, Fernando

    DEVELOPMENT OF REAL TIME FLOOD PREDICTION CAPABILITIES IN PUERTO RICO TO EVALUATE UNCERTAINTIES of Electrical and Computer Engineering 1,2,3 University of Puerto Rico at Mayagez Abstract Due to the complex terrain and the tropical influence, Puerto Rico is characterized by small watersheds, high rainfall

  12. Real-Time Investigation of Lung Surfactant Respreading with Surface Vibrational Spectroscopy

    E-Print Network [OSTI]

    Real-Time Investigation of Lung Surfactant Respreading with Surface Vibrational Spectroscopy Gang, Columbus, Ohio 43210 ReceiVed May 24, 2006. In Final Form: September 22, 2006 The respreading of a lung (BBSFG) spectroscopy. The lung surfactant mixture contains chain perdeuterated

  13. A Database Architecture For Real-Time Motion Retrieval Charly Awad, Nicolas Courty and Sylvie Gibet

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    A Database Architecture For Real-Time Motion Retrieval Charly Awad, Nicolas Courty and Sylvie Gibet, leading to an ex- ponential growth of the size of motion databases. Conse- quently indexing, querying, and retrieving motion capture data have become important considerations in the usability of such databases. Our

  14. Real-Time Character Animation for Computer Games Eike F Anderson

    E-Print Network [OSTI]

    Davies, Christopher

    three-dimensional game characters which are real-time animated inside the virtual environment-time character animation. 2 RELATED WORK Both, memory and processing power, are expensive. More realism in games, by recursively traversing the hierarchic data structure starting from the root, passing down the transformation

  15. Influence of Dynamic Wrinkles on the Perceived Realism of Real-Time Character Animation

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    . It is thus necessary to study the impact of secondary animations on realism by including human perceptionInfluence of Dynamic Wrinkles on the Perceived Realism of Real-Time Character Animation Javier Alcon Universidad Rey Juan Carlos Modeling and Virtual Reality Group c/ Tulipn, s/n 28933, Mstoles

  16. ACE: A Platform for the Real Time Simulation of Virtual Human Agents

    E-Print Network [OSTI]

    Kallmann, Marcelo

    . Keywords: Agents, Virtual Humans, Virtual Environments, Behavioral Animation, Object Interaction, Script. Nowadays many systems are available to animate virtual humans. Such systems encompass several differentACE: A Platform for the Real Time Simulation of Virtual Human Agents Marcelo Kallmann, Jean

  17. Towards Real Time Virtual Human Life Simulations Etienne de Sevin, Marcelo Kallmann and Daniel Thalmann

    E-Print Network [OSTI]

    Kallmann, Marcelo

    Life, Agents, Virtual Humans, Virtual Environments, Behavioral Animation, Classifier Systems, ObjectTowards Real Time Virtual Human Life Simulations Etienne de Sevin, Marcelo Kallmann and Daniel for the development of artificial virtual human life simulations. Our main goal is to have virtual human actors living

  18. Development of an actuated traffic control process utilizing real-time estimated volume feedbback

    E-Print Network [OSTI]

    Pacelli, Michael Joseph

    1999-01-01T23:59:59.000Z

    state of the system in the same units. The goal of this research was to develop an actuated traffic control process that could use estimated volumes in order to optimally operate the traffic signal in real- time in response to actual traffic demands...

  19. Effect of real-time electricity pricing on renewable generators and system emissions

    E-Print Network [OSTI]

    Connolly, Jeremiah P. (Jeremiah Peter)

    2008-01-01T23:59:59.000Z

    Real-time retail pricing (RTP) of electricity, in which the retail price is allowed to vary with very little time delay in response to changes in the marginal cost of generation, offers expected short-run and long-run ...

  20. Minimal Activity Mixed-Signal VLSI Architecture for Real-Time Linear Transforms in Video

    E-Print Network [OSTI]

    Genov, Roman

    -signal processor performs digital vector- matrix multiplication using internally analog fine-grain parallel multiplication, and zero- latency analog accumulation. Matrix coefficients are stored in a bit-parallel form. INTRODUCTION Real-time computing of linear transforms on a battery- powered mobile platform imposes great

  1. Real-time Enabled IEEE 802.15.4 Sensor Networks in Industrial Automation

    E-Print Network [OSTI]

    Breu, Ruth

    Real-time Enabled IEEE 802.15.4 Sensor Networks in Industrial Automation Feng Chen, Thomas Talanis, Industry Automation Division, Germany Abstract--Sensor networks have been investigated in many scenarios, sensor networks became also an interesting topic in industrial automation. Here, the main focus

  2. Temperature-aware Task Partitioning for Real-Time Scheduling in Embedded Systems

    E-Print Network [OSTI]

    Mishra, Prabhat

    Temperature-aware Task Partitioning for Real-Time Scheduling in Embedded Systems Zhe Wang, Sanjay-chip systems are in- creasing exponentially with Moore's Law. High temperature negatively affects reliability way to reduce the peak temperature in embedded systems running either a set of periodic heterogeneous

  3. On-chip real-time single-copy polymerase chain reaction in picoliter droplets

    SciTech Connect (OSTI)

    Beer, N R; Hindson, B; Wheeler, E; Hall, S B; Rose, K A; Kennedy, I; Colston, B

    2007-04-20T23:59:59.000Z

    The first lab-on-chip system for picoliter droplet generation and PCR amplification with real-time fluorescence detection has performed PCR in isolated droplets at volumes 10{sup 6} smaller than commercial real-time PCR systems. The system utilized a shearing T-junction in a silicon device to generate a stream of monodisperse picoliter droplets that were isolated from the microfluidic channel walls and each other by the oil phase carrier. An off-chip valving system stopped the droplets on-chip, allowing them to be thermal cycled through the PCR protocol without droplet motion. With this system a 10-pL droplet, encapsulating less than one copy of viral genomic DNA through Poisson statistics, showed real-time PCR amplification curves with a cycle threshold of {approx}18, twenty cycles earlier than commercial instruments. This combination of the established real-time PCR assay with digital microfluidics is ideal for isolating single-copy nucleic acids in a complex environment.

  4. d Technical Note RING ARRAY TRANSDUCERS FOR REAL-TIME 3-D IMAGING OF AN ATRIAL

    E-Print Network [OSTI]

    Smith, Stephen

    with a matching layer. Real-time 3-D rendered images of an en face view of a Gore Helex septal occluder in a water-Yakub and Oralkan 2011). Atrial septal defects (ASD) comprise up to 7% of total congenital heart lesions and as much as 25% of congenital heart disease in adults (Kaplan 1993). ASDs may go undetected for decades

  5. New and Emerging Technologies for Real-Time Air and Surface Beryllium Monitoring

    SciTech Connect (OSTI)

    Phifer, B.E. Jr.; Churnetski, E.L.; Cooke, L.E.; Reed, J.J.; Howell, M.L.; Smith, V.D.

    2001-09-01T23:59:59.000Z

    In this study, five emerging technologies were identified for real-time monitoring of airborne beryllium: Microwave-Induced Plasma Spectroscopy (MIPS), Aerosol Beam-Focused Laser-Induced Plasma Spectroscopy (ABFLIPS), Laser-Induced Breakdown Spectroscopy (LIBS), Surfaced-Enhanced Raman Scattering (SERS) Spectroscopy, and Micro-Calorimetric Spectroscopy (CalSpec). Desired features of real-time air beryllium monitoring instrumentation were developed from the Y-12 CBDPP. These features were used as guidelines for the identification of potential technologies as well as their unique demonstrated capability to provide real-time monitoring of similar materials. However, best available technologies were considered, regardless of their ability to comply with the desired features. None of the five technologies have the capability to measure the particle size of airborne beryllium. Although reducing the total concentration of airborne beryllium is important, current literature suggests that reducing or eliminating the concentration of respirable beryllium is critical for worker health protection. Eight emerging technologies were identified for surface monitoring of beryllium. CalSpec, MIPS, SERS, LIBS, Laser Ablation, Absorptive Stripping Voltametry (ASV), Modified Inductively Coupled Plasma (ICP) Spectroscopy, and Gamma BeAST. Desired features of real-time surface beryllium monitoring were developed from the Y-12 CBDPP. These features were used as guidelines for the identification of potential technologies. However, the best available technologies were considered regardless of their ability to comply with the desired features.

  6. Adaptive control of real-time media applications in best-effort networks

    E-Print Network [OSTI]

    Khariwal, Vivek

    2004-11-15T23:59:59.000Z

    are end-to-end packet delay, delay jitter, throughtput, and packet losses. Transporting real-time media applications over best-effort networks, e.g. the Internet, is an area of current research. Both the Transmission Control Protocol (TCP) and the User...

  7. COMPUTER-VIDEO METHOD EVALUATES REAL MOTION DATA IN REAL TIME FOR STUDENTS

    E-Print Network [OSTI]

    Zollman, Dean

    COMPUTER-VIDEO METHOD EVALUATES REAL MOTION DATA IN REAL TIME FOR STUDENTS Roman Dengler, Karl dimension. These devices, however, are·normally limited to one dimension. The video camera, on the other of information recorded by the video camera into useable, digital information. For this purpose, we devised

  8. Real-time MRI-Guided Needle Placement Robot with Integrated Fiber Optic Force Sensing

    E-Print Network [OSTI]

    Camesano, Terri

    the robot mechanism, controller design, optical modeling and opto-mechanical design of the force sensor. MRI Control Box Needle Driver Module Cartesian Stage Module Piezoelectric Actuators Robot Fig. 1. (LeftReal-time MRI-Guided Needle Placement Robot with Integrated Fiber Optic Force Sensing Hao Su

  9. CONTROL OF A CLIMBING ROBOT USING REAL-TIME CONVEX OPTIMIZATION

    E-Print Network [OSTI]

    Ma, Yi

    is closed around desired robot chassis position to generate cartesian feedback forces. A convex optimization primarily on the planning problem. This paper focuses on the design of a control system. The target robotCONTROL OF A CLIMBING ROBOT USING REAL-TIME CONVEX OPTIMIZATION Teresa G. Miller Timothy W. Bretl

  10. Model for Correlating Real-Time Survey Results to Contaminant Concentrations - 12183

    SciTech Connect (OSTI)

    Walker, Stuart A. [U.S. Environmental Protection Agency, Washington, DC. 20460 (United States)

    2012-07-01T23:59:59.000Z

    The U.S. Environmental Protection Agency (EPA) Superfund program is developing a new Counts Per Minute (CPM) calculator to correlate real-time survey results, which are often expressed as counts per minute, to contaminant concentrations that are more typically provided in risk assessments or for cleanup levels, usually expressed in pCi/g or pCi/m{sup 2}. Currently there is no EPA guidance for Superfund sites on correlating count per minute field survey readings back to risk, dose, or other ARAR based concentrations. The CPM calculator is a web-based model that estimates a gamma detector response for a given level of contamination. The intent of the CPM calculator is to facilitate more real-time measurements within a Superfund response framework. The draft of the CPM calculator is still undergoing internal EPA review. This will be followed by external peer review. It is expected that the CPM calculator will at least be in peer review by the time of WM2012 and possibly finalized at that time. The CPM calculator should facilitate greater use of real-time measurement at Superfund sites. The CPM calculator may also standardize the process of converting lab data to real time measurements. It will thus lessen the amount of lab sampling that is needed for site characterization and confirmation surveys, but it will not remove the need for sampling. (authors)

  11. Preliminary study of detecting neoplastic growths in vivo with real time calibrated

    E-Print Network [OSTI]

    Qu, Jianan

    Preliminary study of detecting neoplastic growths in vivo with real time calibrated University of Science and Technology, Clear Water Bay, N.T., Hong Kong SAR, P. R. China eequ@ust.hk Tak of Hong Kong, Prince of Wales Hospital, Shatin, N.T., Hong Kong SAR, P. R. China Abstract: The goal

  12. Flow visualization of molten alloys using real-time neutron radiography

    E-Print Network [OSTI]

    Bennett, Tami Norene

    1994-01-01T23:59:59.000Z

    The objective of this research is to visualize the flow of molten alloys using real-time neutron radiography. Initial experiments were performed using solder (50% tin, 50% lead), with nickel tracer particles, heated in a furnace to its liquid state...

  13. LOAD PROFILING IN DISTRIBUTED REAL-TIME SYSTEMS \\One Size Doesn't Fit All"

    E-Print Network [OSTI]

    LOAD PROFILING IN DISTRIBUTED REAL-TIME SYSTEMS \\One Size Doesn't Fit All" Azer Bestavros (best@cs.bu.edu) Boston University Computer Science Department 111 Cummington street Boston, MA 02215 Abstract Load balancing is often used to ensure that nodes in a distributed systems are equally loaded. In this paper, we

  14. EcoMobile: Energy-aware Real-time Framework for Multicore Mobile Systems1

    E-Print Network [OSTI]

    Cheng, Albert M. K.

    EcoMobile: Energy-aware Real-time Framework for Multicore Mobile Systems1 B. Liu, Y. Wen, F. Liu, Y://www.cs.uh.edu Technical Report Number UH-CS-11-09 October 23, 2011 Keywords: mobile system, energy-aware, real plan to build an energy-aware framework for multicore mobile systems which extends Android with two

  15. Real-Time Scheduling of Energy Harvesting Embedded Systems with Timed Automata

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    , in addition to traditional embedded system components, by an energy collector unit (eg a solar panel implants which collect energy from the human body, mobile or fix devices with solar panel or windmill etc) and by an energy storage unit (a battery or a capacitor). One common hypothesis in real-time system theory

  16. Sensing Requirements for Real-Time Monitoring and Control in Energy Production

    E-Print Network [OSTI]

    Ghosh, Ruby N.

    of coal (syngas), requires physical and chemical sensors for exhaust gas monitoring as well as real-time control of the combustion process. Following a description of syngas production from coal, we outline species at 630 C. Our SiC sensor can monitor the hydrogen concentration in a 350 C simulated syngas

  17. Title of Thesis: HARDWARE SUPPORT FOR REAL-TIME OPERATING SYSTEMS

    E-Print Network [OSTI]

    Jacob, Bruce

    : Paul Kohout Degree and year: Master of Science, 2002 Thesis directed by: Professor Bruce L. Jacob bottlenecks. #12;HARDWARE SUPPORT FOR REAL-TIME OPERATING SYSTEMS by Paul James Kohout Thesis submitted Professor Gang Qu Professor David B. Stewart #12;©Copyright by Paul James Kohout 2002 #12;ii

  18. R3TOS: A Reliable Reconfigurable Real-Time Operating System Xabier Iturbe1,2

    E-Print Network [OSTI]

    Arslan, Tughrul

    R3TOS: A Reliable Reconfigurable Real-Time Operating System Xabier Iturbe1,2 , Khaled Benkrid1-Time Operating System (R3TOS) are presented. The main objective of R3TOS is to create an infrastruc- ture faults in the underlying chip's silicon at runtime (true fault re- moval from system). R3TOS is aimed

  19. Adapting Distributed Real-time and Embedded Pub/Sub Middleware for Cloud Computing Environments

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    Adapting Distributed Real-time and Embedded Pub/Sub Middleware for Cloud Computing Environments Joe/subscribe (pub/sub) systems manage resources and data that are vital to users. Cloud com- puting--where computing paradigm. Enterprise DRE pub/- sub systems can leverage cloud computing provisioning services to execute

  20. AN INTEGRATED LUNG-ON-A-CHIP MICROFLUIDIC PLATFORM WITH REAL-TIME BIOCHEMICAL SENSING

    E-Print Network [OSTI]

    Kassegne, Samuel Kinde

    AN INTEGRATED LUNG-ON-A-CHIP MICROFLUIDIC PLATFORM WITH REAL-TIME BIOCHEMICAL SENSING, without finding it. Lucius Annaeus Seneca #12;v ABSTRACT OF THE THESIS An Integrated Lung for detection. In this research, we replicate the Lung-on- a-Chip platform with a cystic fibrosis cell line

  1. Predictable Interrupt Management for Real Time Kernels over conventional PC Hardware1

    E-Print Network [OSTI]

    Mejia-Alvarez, Pedro

    which this integrated model improves the traditional model. The design of a flexible and portable kernel-CONACyT 42151-Y, and CONACYT 42449-Y Mexico. Abstract In this paper we analyze the traditional model on real-time systems. As a result of this analysis, we propose a model that integrates interrupts

  2. Production, Manufacturing and Logistics Using real time information for effective dynamic scheduling

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    In many production processes real time information may be obtained from process control computers of the revised schedule against the production disturbance which results from changing the planned schedule. We into scheduling the complex production processes of steel continuous caster planning. 2002 Elsevier Science B

  3. Utility Driven Optimization of Real Time Data Broadcast Schedules Rinku Dewria,

    E-Print Network [OSTI]

    Ray, Indrakshi

    Utility Driven Optimization of Real Time Data Broadcast Schedules Rinku Dewria, , Indrakshi Rayb of portable computing devices thoroughly embedded in our day-to-day work and personal life. The de- vices addresses: rdewri@cs.du.edu (Rinku Dewri), iray@cs.colostate.edu (Indrakshi Ray), indrajit

  4. Impact of job dropping on the schedulability of uniprocessor probabilistic real-time systems

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    Impact of job dropping on the schedulability of uniprocessor probabilistic real-time systems. For these systems the tasks have an associated probability of missing the deadline, i.e., some jobs may miss their deadlines without affecting the schedula- bility of the system. Therefore dropping these jobs does

  5. Nanogap Detector Inside Nanofluidic Channel for Fast Real-Time Label-Free

    E-Print Network [OSTI]

    Nanogap Detector Inside Nanofluidic Channel for Fast Real-Time Label-Free DNA Analysis Xiaogan a long nanofluidic channel to stretch a DNA strand and a nanogap detector (with a gap as small as 9 nm nanofluidic channel to stretch a DNA strand into a linear chain, while using a nanogap detector, consisting

  6. Real-Time Frame-Dependent Watermarking in MPEG-2 Video

    E-Print Network [OSTI]

    Chen, Sheng-Wei

    Real-Time Frame-Dependent Watermarking in MPEG-2 Video Chun-Shien Lu ?, Jan-Ru Chen y, and Kuo data. In particular, video watermarking deals with several issues that are unique to various types-time detection, bit-rate control, and resistance to watermark estimation attacks, will be addressed. Since video

  7. Generating audio-responsive video images in real-time for a live symphony performance

    E-Print Network [OSTI]

    Beane, Allison Brooke

    2007-09-17T23:59:59.000Z

    instruments to cutting-edge video image productions for musical groups of all sizes. Throughout this evolution, a common goal has been to create real-time, audio-responsive visuals that accentuate the sound and enhance the performance. This paper explains...

  8. Real-time metaphorical visualization of multi-dimensional environmental data

    E-Print Network [OSTI]

    Aley, Eric Brian

    2006-08-16T23:59:59.000Z

    . Visualization with Real-Time Video.......................................... 31 6.1. Internal Changes in the Video Layers............................ 31 6.2. Compositing Video Streams........................................... 35 V RESULTS... of the simulation when electricity is held constant (in order to reduce it from four dimensions)................................................................................ 28 17 The lightning video clip. The five-second playback window used...

  9. Optimal Real-time Pricing Algorithm Based on Utility Maximization for Smart Grid

    E-Print Network [OSTI]

    Mohsenian-Rad, Hamed

    tool to develop efficient demand side management strategies, we propose a novel real-time pricing the need to develop new methods for demand side management (DSM). There is a wide range of DSM techniques consumption occurs in buildings [2]. In addition, the arising of new types of demand such as plug-in hybrid

  10. Real-time microseismic monitoring: Automatic wave processing and multilayered velocity model for accurate event location

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    for the prevention of dynamic phenomena is an integral part of a strategy for exploring zones where there are risks, and the mine layout, all playing a significant contribution to the rate of seismic energy released. In order, powerfui Software has been installed in order to provide for high quality, real time microseismic

  11. Real-time Bus Information on Mobile Devices Stuart D. Maclean, Daniel J. Dailey

    E-Print Network [OSTI]

    on a variety of personal electronic devices. Within the wireless communications industry, the WAP Forum[2] has1 Real-time Bus Information on Mobile Devices Stuart D. Maclean, Daniel J. Dailey Abstract-- We restrictions of such devices, e.g., screen size and paucity of keyboard options, influences the user in

  12. An off-line multiprocessor real-time scheduling algorithm to reduce static energy consumption

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    An off-line multiprocessor real-time scheduling algorithm to reduce static energy consumption, France laurent.pautet@telecom-paristech.fr Abstract--Energy consumption of highly reliable real dynamic energy consumption. This paper aims to propose a new off-line schedul- ing algorithm to put

  13. Real-Time Capable Methods to Determine the Magnet Temperature of Permanent Magnet

    E-Print Network [OSTI]

    Paderborn, Universität

    }@lea.upb.de Abstract--The permanent magnet synchronous motor (PMSM) is widely used in highly utilised automotive-based magnet temperature determination methods in PMSM. In this context, the existing publications can field. Keywords--PMSM, permanent magnet temperature, model- based real-time determination, motor control

  14. System-Wide Energy Minimization for Real-Time Tasks: Lower Bound and Approximation

    E-Print Network [OSTI]

    Xu, Cheng-Zhong

    - time solutions by exploiting its inherent properties. 1. INTRODUCTION Power management is importantSystem-Wide Energy Minimization for Real-Time Tasks: Lower Bound and Approximation Xiliang Zhong and Cheng-Zhong Xu Department of Electrical and Computer Engineering Wayne State University, Detroit

  15. System-Wide Energy Minimization for Real-Time Tasks: Lower Bound and

    E-Print Network [OSTI]

    Xu, Cheng-Zhong

    28 System-Wide Energy Minimization for Real-Time Tasks: Lower Bound and Approximation XILIANG ZHONG that minimizes system-wide energy consumption for both periodic and sporadic tasks. It is known that a system consists of processors and a number of other components. Energy-aware processors can be run in different

  16. Real-time growth rate metrology for a tungsten chemical vapor deposition process by acoustic sensing

    E-Print Network [OSTI]

    Rubloff, Gary W.

    to a production-scale tungsten chemical vapor deposition cluster tool for in situ process sensing. Process gasesReal-time growth rate metrology for a tungsten chemical vapor deposition process by acoustic to achieve run-to-run process control of the deposited tungsten film thickness. 2001 American Vacuum

  17. Short communication Real-time estimation of lead-acid battery parameters: A dynamic

    E-Print Network [OSTI]

    Ray, Asok

    -charged and over-discharged; similarly, reliable SOH estimates enhance preventive maintenance and life cycle cost situations. © 2014 Elsevier B.V. All rights reserved. 1. Introduction Lead-acid batteries provide low-costShort communication Real-time estimation of lead-acid battery parameters: A dynamic data

  18. A Component-Based Approach for Constructing High-confidence Distributed Real-time and

    E-Print Network [OSTI]

    Tuceryan, Mihran

    the entire software life-cycle. 1 Introduction As the complexity of Distributed Real-Time Embedded (DRE development cost, but also facilitate high-confidence DRE system construction using different formalisms over implementations of the same functional component with different run-time features (e.g., battery consumption

  19. A Component-Based Approach for Constructing High-Confidence Distributed Real-Time and

    E-Print Network [OSTI]

    Gray, Jeffrey G.

    the entire software life-cycle. 1 Introduction As the complexity of Distributed Real-Time Embedded (DRE development cost, but also facilitate high-confidence DRE system construction using different formalisms over with different run-time features (e.g., battery consumption versus throughput). Addition- ally, two components

  20. REAL-TIME STRUCTURAL DAMAGE DETECTION USING WIRELESS SENSING AND MONITORING SYSTEM

    E-Print Network [OSTI]

    Stanford University

    REAL-TIME STRUCTURAL DAMAGE DETECTION USING WIRELESS SENSING AND MONITORING SYSTEM Kung-Chun Lu1 Professor, Department of Civil & Environmental Engineering, University of Michigan, Ann Arbor, MI 48109, USA, jerlynch@umich.edu 5 Professor, Department of Civil & Environmental Engineering, Stanford University

  1. RINSE: the Real-time Immersive Network Simulation Environment for Network Security Exercises (Extended Version)

    E-Print Network [OSTI]

    Liu, Xiaowen "Jason"

    RINSE: the Real-time Immersive Network Simulation Environment for Network Security Exercises-time Immer- sive Network Simulation Environment for network security exercises (RINSE) to meet this need to support large-scale network security preparedness and training ex- ercises, involving hundreds of players

  2. REAL-TIME DISPATCHING OF GUIDED AND UNGUIDED AUTOMOBILE SERVICE UNITS WITH SOFT TIME WINDOWS

    E-Print Network [OSTI]

    Krumke, Sven O.

    REAL-TIME DISPATCHING OF GUIDED AND UNGUIDED AUTOMOBILE SERVICE UNITS WITH SOFT TIME WINDOWS SVEN O that are no worse than 1% from optimum on state-of-the-art personal computers. 1. INTRODUCTION The German Automobile Association ADAC (Allgemeiner Deutscher Automobil- Club), the second largest automobile club worldwide

  3. Experiments on whole-body manipulation and locomotion with footstep real-time optimization

    E-Print Network [OSTI]

    Boyer, Edmond

    , a humanoid robot can access to an environment specifically built for human, interact with that environment of the robot and are dictated by the task applied to the augmented robot. Build a reactive scheme on the HRP-2 humanoid robot using a framework of manipulation and locomotion with real-time footstep

  4. Exploiting Real-Time FPGA Based Adaptive Systems Technology for Real-Time Sensor Fusion in Next Generation Automotive Safety Systems

    E-Print Network [OSTI]

    Chappell, Steve; Preston, Dan; Olmstead, Dave; Flint, Bob; Sullivan, Chris

    2011-01-01T23:59:59.000Z

    We present a system for the boresighting of sensors using inertial measurement devices as the basis for developing a range of dynamic real-time sensor fusion applications. The proof of concept utilizes a COTS FPGA platform for sensor fusion and real-time correction of a misaligned video sensor. We exploit a custom-designed 32-bit soft processor core and C-based design & synthesis for rapid, platform-neutral development. Kalman filter and sensor fusion techniques established in advanced aviation systems are applied to automotive vehicles with results exceeding typical industry requirements for sensor alignment. Results of the static and the dynamic tests demonstrate that using inexpensive accelerometers mounted on (or during assembly of) a sensor and an Inertial Measurement Unit (IMU) fixed to a vehicle can be used to compute the misalignment of the sensor to the IMU and thus vehicle. In some cases the model predications and test results exceeded the requirements by an order of magnitude with a 3-sigma or ...

  5. Real-time characterization of particle-bound polycyclic aromatic hydrocarbons in ambient aerosols and from motor-vehicle exhaust

    E-Print Network [OSTI]

    Polidori, A.; Hu, S.; Biswas, S.; Delfino, R. J; Sioutas, C.

    2008-01-01T23:59:59.000Z

    between in-situ, real-time aerosol photoemis- sion intensityconcentration in combustion aerosols, Water, Air, Soilin-use commercial aircraft, Aerosol Sci. Tech. , 39(8), 799

  6. Robots learning to manipulate: real-time application-oriented algorithms using feature-based and machine learning techniques

    E-Print Network [OSTI]

    Balaguer, Benjamin Daniel

    2012-01-01T23:59:59.000Z

    R. Diankov, G. Bradski, and M. Beetz. Perception for mobileB. Gerkey, S. Chitta, M. Beetz, and L. Kavraki. Real- time

  7. Individual Permit for Storm Water

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Compliance Miscellaneous EPA Submittals Public Meetings Renewal Application Construction Certifications Corrective Action Storm Water Analytical Period Get updates on LANL...

  8. Real-time Non-contact Millimeter Wave Characterization of Water-Freezing and Ice-Melting Dynamics

    SciTech Connect (OSTI)

    Sundaram, S. K.; Woskov, Paul P.

    2008-11-12T23:59:59.000Z

    We applied millimeter wave radiometry for the first time to monitor water-freezing and ice-melting dynamics in real-time non-contact. The measurements were completed at a frequency of 137 GHz. Small amounts (about 2 mL) of freshwater or saltwater were frozen over a Peltier cooler and the freezing and melting sequence was recorded. Saltwater was prepared in the laboratory that contained 3.5% of table salt to simulate the ocean water. The dynamics of freezing-melting was observed by measuring the millimeter wave temperature as well as the changes in the ice or water surface reflectivity and position. This was repeated using large amounts of freshwater and saltwater (800 mL) mimicking glaciers. Millimeter wave surface level fluctuations indicated as the top surface melted, the light ice below floated up indicating lower surface temperature until the ice completely melted. Our results are useful for remote sensing and tracking temperature for potentially large-scale environmental applications, e.g., global warming.

  9. REAL-TIME TRACER MONITORING OF RESERVOIR STIMULATION PROCEDURES VIA ELECTRONIC WIRELINE AND TELEMETRY DATA TRANSMISSION

    SciTech Connect (OSTI)

    George L. Scott III

    2005-01-01T23:59:59.000Z

    Finalized Phase 2-3 project work has field-proven two separate real-time reservoir processes that were co-developed via funding by the National Energy Technology Laboratory (NETL). Both technologies are presently patented in the United States and select foreign markets; a downhole-commingled reservoir stimulation procedure and a real-time tracer-logged fracturing diagnostic system. Phase 2 and early Phase 3 project work included the research, development and well testing of a U.S. patented gamma tracer fracturing diagnostic system. This stimulation logging process was successfully field-demonstrated; real-time tracer measurement of fracture height while fracturing was accomplished and proven technically possible. However, after the initial well tests, there were several licensing issues that developed between service providers that restricted and minimized Realtimezone's (RTZ) ability to field-test the real-time gamma diagnostic system as was originally outlined for this project. Said restrictions were encountered after when one major provider agreed to license their gamma logging tools to another. Both of these companies previously promised contributory support toward Realtimezone's DE-FC26-99FT40129 project work, however, actual support was less than desired when newly-licensed wireline gamma logging tools from one company were converted by the other from electric wireline into slickline, batter-powered ''memory'' tools for post-stimulation logging purposes. Unfortunately, the converted post-fracture measurement memory tools have no applications in experimentally monitoring real-time movement of tracers in the reservoir concurrent with the fracturing treatment. RTZ subsequently worked with other tracer gamma-logging tool companies for basic gamma logging services, but with lessened results due to lack of multiple-isotope detection capability. In addition to real-time logging system development and well testing, final Phase 2 and Phase 3 project work included the development of a real-time reservoir stimulation procedure, which was successfully field-demonstrated and is presently patented in the U.S. and select foreign countries, including Venezuela, Brazil and Canada. Said patents are co-owned by RTZ and the National Energy Technology Lab (NETL). In 2002, Realtimezone and the NETL licensed said patents to Halliburton Energy Services (HES). Additional licensing agreements (LA) are anticipated with other service industry companies in 2005. Final Phase 3 work has led to commercial applications of the real-time reservoir stimulation procedure. Four successfully downhole-mixed well tests were conducted with commercially expected production results. The most recent, fourth field test was a downhole-mixed stimulated well completed in June, 2004, which currently produces 11 BOPD with 90 barrels of water per day. Conducted Phase 2 and Phase 3 field-test work to date has resulted in the fine-tuning of a real-time enhanced stimulation system that will significantly increase future petroleum well recoveries in the United States and foreign petroleum fields, both onshore and offshore, and in vertical and horizontal wells.

  10. Weathering the storm

    SciTech Connect (OSTI)

    Burr, M.T.

    1993-02-01T23:59:59.000Z

    When Hurricane Andrew struck, thousands were displaced from their homes in Florida and Louisiana. Now, months after the winds ceased blowing, the storm is causing hardship once again. Insurance companies sustaining large losses in recent months from a number of natural disasters - including the hurricane - are now passing those losses on to their customers. Independent power companies are no exception.

  11. A Data Driven Framework for Real Time Power System Event Detection and Visualization

    E-Print Network [OSTI]

    McCamish, Ben; Landford, Jordan; Bass, Robert; Cotilla-Sanchez, Eduardo; Chiu, David

    2015-01-01T23:59:59.000Z

    Increased adoption and deployment of phasor measurement units (PMU) has provided valuable fine-grained data over the grid. Analysis over these data can provide real-time insight into the health of the grid, thereby improving control over operations. Realizing this data-driven control, however, requires validating, processing and storing massive amounts of PMU data. This paper describes a PMU data management system that supports input from multiple PMU data streams, features an event-detection algorithm, and provides an efficient method for retrieving archival data. The event-detection algorithm rapidly correlates multiple PMU data streams, providing details on events occurring within the power system in real-time. The event-detection algorithm feeds into a visualization component, allowing operators to recognize events as they occur. The indexing and data retrieval mechanism facilitates fast access to archived PMU data. Using this method, we achieved over 30x speedup for queries with high selectivity. With th...

  12. Accelerating the Customer-Driven Microgrid Through Real-Time Digital Simulation

    SciTech Connect (OSTI)

    I. Leonard; T. Baldwin; M. Sloderbeck

    2009-07-01T23:59:59.000Z

    Comprehensive design and testing of realistic customer-driven microgrids requires a high performance simulation platform capable of incorporating power system and control models with external hardware systems. Traditional non real-time simulation is unable to fully capture the level of detail necessary to expose real-world implementation issues. With a real-time digital simulator as its foundation, a high-fidelity simulation environment that includes a robust electrical power system model, advanced control architecture, and a highly adaptable communication network is introduced. Hardware-in-the-loop implementation approaches for the hardware-based control and communication systems are included. An overview of the existing power system model and its suitability for investigation of autonomous island formation within the microgrid is additionally presented. Further test plans are also documented.

  13. Application of real-time monitoring in decision making: The new Bedford Harbor pilot dredging project

    SciTech Connect (OSTI)

    Nelson, W.G.

    1994-01-01T23:59:59.000Z

    A decision-making framework was established for assessing the impacts of a pilot dredging study at the New Bedford Harbor, MA, Superfund site. Concern over possible environmental impacts due to dredging at the site necessitated that a monitoring program be implemented to ensure that unacceptable water quality impacts did not occur during the project. A committee of environmental managers from Federal and state government was established with the authority to assess and modify the operation on a daily basis. Finally, a 'real-time' monitoring plan was implemented in which water samples were collected, analyzed within 16 hours, and the data supplied to the management committee in order to assess the environmental impact of the previous days' operation. The combined use of site-specific criteria and a real-time' decision making management process allowed for successful completion of the project with a minimal effect on water quality.

  14. PONDER - A Real time software backend for pulsar and IPS observations at the Ooty Radio Telescope

    E-Print Network [OSTI]

    Naidu, Arun; Manoharan, P K; Krishnakumar, M A

    2015-01-01T23:59:59.000Z

    This paper describes a new real-time versatile backend, the Pulsar Ooty Radio Telescope New Digital Efficient Receiver (PONDER), which has been designed to operate along with the legacy analog system of the Ooty Radio Telescope (ORT). PONDER makes use of the current state of the art computing hardware, a Graphical Processing Unit (GPU) and sufficiently large disk storage to support high time resolution real-time data of pulsar observations, obtained by coherent dedispersion over a bandpass of 16 MHz. Four different modes for pulsar observations are implemented in PONDER to provide standard reduced data products, such as time-stamped integrated profiles and dedispersed time series, allowing faster avenues to scientific results for a variety of pulsar studies. Additionally, PONDER also supports general modes of interplanetary scintillation (IPS) measurements and very long baseline interferometry data recording. The IPS mode yields a single polarisation correlated time series of solar wind scintillation over a b...

  15. Real-Time Traffic Information for Emergency Evacuation Operations: Phase A Final Report

    SciTech Connect (OSTI)

    Franzese, Oscar [ORNL; Zhang, Li [Mississippi State University (MSU); Mahmoud, Anas M. [Mississippi State University (MSU); Lascurain, Mary Beth [ORNL; Wen, Yi [Mississippi State University (MSU)

    2010-05-01T23:59:59.000Z

    There are many instances in which it is possible to plan ahead for an emergency evacuation (e.g., an explosion at a chemical processing facility). For those cases, if an accident (or an attack) were to happen, then the best evacuation plan for the prevailing network and weather conditions would be deployed. In other cases (e.g., the derailment of a train transporting hazardous materials), there may not be any previously developed plan to be implemented and decisions must be made ad-hoc on how to proceed with an emergency evacuation. In both situations, the availability of real-time traffic information plays a critical role in the management of the evacuation operations. To improve public safety during a vehicular emergency evacuation it is necessary to detect losses of road capacity (due to incidents, for example) as early as possible. Once these bottlenecks are identified, re-routing strategies must be determined in real-time and deployed in the field to help dissipate the congestion and increase the efficiency of the evacuation. Due to cost constraints, only large urban areas have traffic sensor deployments that permit access to some sort of real-time traffic information; any evacuation taking place in any other areas of the country would have to proceed without real-time traffic information. The latter was the focus of this SERRI/DHS (Southeast Region Research Initiative/Department of Homeland Security) sponsored project. That is, the main objective on the project was to improve the operations during a vehicular emergency evacuation anywhere by using newly developed real-time traffic-information-gathering technologies to assess traffic conditions and therefore to potentially detect incidents on the main evacuation routes. Phase A of the project consisted in the development and testing of a prototype system composed of sensors that are engineered in such a way that they can be rapidly deployed in the field where and when they are needed. Each one of these sensors is also equipped with their own power supply and a GPS (Global Positioning System) device to auto-determine its spatial location on the transportation network under surveillance. The system is capable of assessing traffic parameters by identifying and re-identifying vehicles in the traffic stream as those vehicles pass over the sensors. The system of sensors transmits, through wireless communication, real-time traffic information (travel time and other parameters) to a command and control center via an NTCIP (National Transportation Communication for ITS Protocol) -compatible interface. As an alternative, an existing NTCIP-compatible system accepts the real-time traffic information mentioned and broadcasts the traffic information to emergency managers, the media and the public via the existing channels. A series of tests, both in a controlled environment and on the field, were conducted to study the feasibility of rapidly deploying the system of traffic sensors and to assess its ability to provide real-time traffic information during an emergency evacuation. The results of these tests indicated that the prototype sensors are reliable and accurate for the type of application that is the focus of this project.

  16. Real time method and computer system for identifying radioactive materials from HPGe gamma-ray spectroscopy

    DOE Patents [OSTI]

    Rowland, Mark S. (Alamo, CA); Howard, Douglas E. (Livermore, CA); Wong, James L. (Dublin, CA); Jessup, James L. (Tracy, CA); Bianchini, Greg M. (Livermore, CA); Miller, Wayne O. (Livermore, CA)

    2007-10-23T23:59:59.000Z

    A real-time method and computer system for identifying radioactive materials which collects gamma count rates from a HPGe gamma-radiation detector to produce a high-resolution gamma-ray energy spectrum. A library of nuclear material definitions ("library definitions") is provided, with each uniquely associated with a nuclide or isotope material and each comprising at least one logic condition associated with a spectral parameter of a gamma-ray energy spectrum. The method determines whether the spectral parameters of said high-resolution gamma-ray energy spectrum satisfy all the logic conditions of any one of the library definitions, and subsequently uniquely identifies the material type as that nuclide or isotope material associated with the satisfied library definition. The method is iteratively repeated to update the spectrum and identification in real time.

  17. Deployment of High Resolution Real-Time Distribution Level Metering on Maui: Preprint

    SciTech Connect (OSTI)

    Bank, J.

    2013-01-01T23:59:59.000Z

    In order to support the ongoing Maui Smart Grid demonstration project advanced metering has been deployed at the distribution transformer level in Maui Electric Company's Kihei Circuit on the Island of Maui. This equipment has been custom designed to provide accurately time-stamped Phasor and Power Quality data in real time. Additionally, irradiance sensors have been deployed at a few selected locations in proximity to photovoltaic (PV) installations. The received data is being used for validation of existing system models and for impact studies of future system hardware. Descriptions of the hardware and its installation, and some preliminary metering results are presented. Real-time circuit visualization applications for the data are also under development.

  18. Real-time alignment and calibration of the LHCb Detector in Run II

    E-Print Network [OSTI]

    Dujany, Giulio

    2015-01-01T23:59:59.000Z

    table, precise spatial alignment and PID calibration are necessary to achieve optimal detector performance. During Run2, LHCb will have a new real-time detector alignment and calibration to allow equivalent performance in the online and offline reconstruction to be reached. This offers the opportunity to optimise the event selection by applying stronger constraints, and to use hadronic particle identification at the trigger level. The computing time constraints are met through the use of a new dedicated framework using the multi-core farm infrastructure for the trigger. The motivation for a real-time alignment and calibration of the LHCb detector is discussed from the operative and physics performance point of view. Specific challenges of this configuration are discussed, as well as the designed framework and its performance.

  19. Real-time alignment and calibration of the LHCb Detector in Run II

    E-Print Network [OSTI]

    Dujany, Giulio

    2015-01-01T23:59:59.000Z

    Stable, precise spatial alignment and PID calibration are necessary to achieve optimal detector performance. During Run2, LHCb will have a new real-time detector alignment and calibration to allow equivalent performance in the online and offline reconstruction to be reached. This offers the opportunity to optimise the event selection by applying stronger constraints, and to use hadronic particle identification at the trigger level. The computing time constraints are met through the use of a new dedicated framework using the multi-core farm infrastructure for the trigger. The motivation for a real-time alignment and calibration of the LHCb detector is discussed from the operative and physics performance point of view. Specific challenges of this configuration are discussed, as well as the designed framework and its performance.

  20. Real-time geo-registration of imagery using COTS graphics processors

    DOE Patents [OSTI]

    Flath, Laurence M. (Livermore, CA); Kartz, Michael W. (Tracy, CA)

    2009-06-30T23:59:59.000Z

    A method of performing real-time geo-registration of high-resolution digital imagery using existing graphics processing units (GPUs) already found in current personal computers, rather than the main central processing unit (CPU). Digital image data captured by a camera (along with inertial navigation system (INS) data associated with the image data) is transferred to and processed by the GPU to perform the calculations involved in transforming the captured image into a geo-rectified, nadir-looking image. By using the GPU, the order-of-magnitude increase in throughput over conventional software techniques makes real-time geo-registration possible without the significant cost of custom hardware solutions.