National Library of Energy BETA

Sample records for real estate process

  1. Real Estate Approvals | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Real Estate Approvals Real Estate Approvals Real Estate Approvals Policy Flash 2011-61, Acquisition Guide Chapter 17.3, Acquisition, Use, and Disposal of Real Estate (attachment)

  2. Real Estate Approvals | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Real Estate Approvals Real Estate Approvals Real Estate Approvals Policy Flash 2011-61, Acquisition Guide Chapter 17.3, Acquisition, Use, and Disposal of Real Estate (attachment)

  3. Sustainability in Real Estate Operations

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Convention Center * Phoenix, Arizona Sustainability in Real Estate Operations Sustainability Sustainability Planning Eleni Reed GSA Public Buildings Service August 11, 2015 Sustainability in Real Estate Operations GSA incorporates sustainability practices in real estate operations Sustainability performance is an integral aspect of GSA's real estate operations 3 GSA PORTFOLIO 8,721 total assets * 376.9 million sq. ft. 1,574 owned assets * 183.4 million owned sq. ft. 7,147 leased assets * 193.4

  4. Colonia Real Estate | Open Energy Information

    Open Energy Info (EERE)

    Estate Jump to: navigation, search Name: Colonia Real Estate Place: Germany Product: German property developer. References: Colonia Real Estate1 This article is a stub. You can...

  5. Join the Commercial Real Estate Energy Alliance

    SciTech Connect (OSTI)

    2009-03-01

    This fact sheet describes the Commercial Real Estate Energy Alliance, it's membership, and activities.

  6. Business Models Guide: Real Estate Agent

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BUSINESS MODELS GUIDE - Real Estate Agent REAL ESTATE AGENT A real estate agent acts as an intermediary for the sale and purchase of buildings and land. "Realtor ® " is a trademarked term for real estate agents affiliated with the National Association of Realtors (NAR). Most agents and brokers are active in the residential market, but some specialize in commercial or agricultural properties. Only licensed brokers are allowed to sell properties, so they often sponsor real estate agents

  7. Bully Real Estate AS | Open Energy Information

    Open Energy Info (EERE)

    Real Estate AS Jump to: navigation, search Name: Bully Real Estate AS Place: Praha 2, Czech Republic Zip: 120 00 Product: Czech Republic-based company going ahead as a...

  8. Working with the Real Estate Sector

    Broader source: Energy.gov [DOE]

    Better Buildings Neighborhood Program Workforce Peer Exchange Call: Working with the Real Estate Sector, Call Slides and Discussion Summary, March 1, 2012. This call discussed effective strategies for working with the real estate sector.

  9. Acquisition, Use, and Disposal of Real Estate

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Chapter 17.3 (March 2011) 1 Acquisition, Use, and Disposal of Real Estate References DEAR 917.74 - Acquisition, Use, and Disposal of Real Estate DOE Directives DOE Order 413.3B, Program and Project Management for the Acquisition of Capital Assets, or current version DOE Order 430.1B, Real Property Asset Management, or current version Overview This section provides internal Departmental information and DOE and NNSA points of contact for issues dealing with real estate acquisition, use, and

  10. REAL ESTATE PROPERTY GUIDE 2014 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 REAL ESTATE PROPERTY GUIDE 2014 Real Estate Desk Guide - 2014 update.pdf (1.72 MB) More Documents & Publications 2013 Real Property Desk Guide REAL ESTATE PROPERTY GUIDE 2013 2015 Federal Real Property Council Reporting Guidance

  11. Business Models Guide: Real Estate Agent | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Business Models Guide: Real Estate Agent Business Models Guide: Real Estate Agent With excellent marketing skills, a keen understanding of financing options, and a broad knowledge of the industry, real estate agents are natural advocates for smart energy efficiency upgrades. Business Models Guide: Real Estate Agent (50.43 KB) More Documents & Publications Working with the Real Estate Sector Business Models and Case Examples for Working with the Real Estate Sector Trends in Real Estate and

  12. Trends in Real Estate and Energy Efficiency

    Broader source: Energy.gov [DOE]

    Better Buildings Residential Network Peer Exchange Call Series: Trends in Real Estate and Energy Efficiency, call slides and discussion summary, January 22, 2015.

  13. REAL ESTATE PROPERTY GUIDE 2013 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 REAL ESTATE PROPERTY GUIDE 2013 Real Estate Desk Guide - 2013 update.pdf (597.46 KB) More Documents & Publications REAL ESTATE PROPERTY GUIDE 2014 2013 Real Property Desk Guide OPAM Policy Acquisition Guides

  14. REAL ESTATE PROPERTY GUIDE 2014 | Department of Energy

    Energy Savers [EERE]

    REAL ESTATE PROPERTY GUIDE 2014 PDF icon Real Estate Desk Guide - 2014 update.pdf More Documents & Publications 2013 Real Property Desk Guide REAL ESTATE PROPERTY GUIDE 2013 OPAM ...

  15. Advances in Integrating Energy Efficiency into the Real Estate...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advances in Integrating Energy Efficiency into the Real Estate Market (301) Advances in Integrating Energy Efficiency into the Real Estate Market (301) April 21

  16. Working with Real Estate Home Inspectors, Exterminators, and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Real Estate Home Inspectors, Exterminators, and Other "Nontraditional" Partners Working with Real Estate Home Inspectors, Exterminators, and Other "Nontraditional" Partners Better ...

  17. Capturing Energy Upgrades in the Real Estate Transaction | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Capturing Energy Upgrades in the Real Estate Transaction Capturing Energy Upgrades in the Real Estate Transaction Because green building techniques and products may impact the ...

  18. Mastermind Session: Connecting the Dots Between the Real Estate...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Connecting the Dots Between the Real Estate Market and Residential Energy Efficiency Mastermind Session: Connecting the Dots Between the Real Estate Market and Residential Energy ...

  19. Trends in Real Estate and Energy Efficiency | Department of Energy

    Energy Savers [EERE]

    Efficiency Trends in Real Estate and Energy Efficiency Better Buildings Residential Network Peer Exchange Call Series: Trends in Real Estate and Energy Efficiency, call slides and ...

  20. Advances in Integrating Energy Efficiency Into the Real Estate...

    Energy Savers [EERE]

    More Documents & Publications Mastermind Session: Connecting the Dots Between the Real Estate Market and Residential Energy Efficiency Trends in Real Estate and Energy Efficiency ...

  1. Business Models Guide: Real Estate Agent | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Models Guide: Real Estate Agent Business Models Guide: Real Estate Agent With excellent marketing skills, a keen understanding of financing options, and a broad knowledge of the ...

  2. Working with Real Estate Home Inspectors, Exterminators, and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Working with Real Estate Home Inspectors, Exterminators, and Other "Nontraditional" Partners Working with Real Estate Home Inspectors, Exterminators, and Other "Nontraditional"...

  3. Acquisition, Use, and Disposal of Real Estate | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Acquisition, Use, and Disposal of Real Estate Acquisition, Use, and Disposal of Real Estate Acquisition, Use, and Disposal of Real Estate (76.66 KB) More Documents & Publications OPAM Policy Acquisition Guides Chapter 17 - Special Contracting Methods Acquisition Guide Chapter 17.3, Acquisition, Use, and Disposal of Real Estate

  4. Acquisition, Use, and Disposal of Real Estate | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Acquisition, Use, and Disposal of Real Estate Acquisition, Use, and Disposal of Real Estate More Documents & Publications Acquisition Guide Chapter 17.3, Acquisition, Use, and Disposal of Real Estate OPAM Policy Acquisition Guides Acquisition, Use, and Disposal of Real Estate

  5. Department of Energy and Commercial Real Estate Executives Launch Alliance

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to Reduce Energy Consumption of Buildings | Department of Energy Commercial Real Estate Executives Launch Alliance to Reduce Energy Consumption of Buildings Department of Energy and Commercial Real Estate Executives Launch Alliance to Reduce Energy Consumption of Buildings April 9, 2009 - 12:00am Addthis WASHINGTON, D.C. - Top executives from 19 commercial real estate companies met with U.S. Department of Energy (DOE) officials in New York City today to discuss plans to dramatically reduce

  6. Trends in Real Estate and Energy Efficiency -- Update on Program...

    Energy Savers [EERE]

    Efficiency -- Update on Program Experience Trends in Real Estate and Energy Efficiency -- Update on Program Experience Better Buildings Residential Network Program Sustainability ...

  7. Department of Energy and Commercial Real Estate Executives Launch...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Alliance to Reduce Energy Consumption of Buildings Department of Energy and Commercial Real Estate Executives Launch Alliance to Reduce Energy Consumption of Buildings April 9, ...

  8. Business Models and Case Examples for Working with the Real Estate...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Business Models and Case Examples for Working with the Real Estate Sector Business Models and Case Examples for Working with the Real Estate Sector Better Buildings Neighborhood ...

  9. Business Models and Case Examples for Working with the Real Estate...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Business Models and Case Examples for Working with the Real Estate Sector Business Models and Case Examples for Working with the Real Estate Sector Better Buildings Neighborhood...

  10. Asset Score Webinar Slides: Real Estate and Design Professionals

    Broader source: Energy.gov [DOE]

    The Asset Score is a free, web-based software tool developed by DOE and the Pacific Northwest National Laboratory (PNNL) that assesses the physical and structural energy efficiency of commercial and multifamily residential buildings. It generates a simple energy efficiency rating that enables comparison among buildings, and identifies custom opportunities to invest in energy efficiency upgrades. The Asset Score has already been used, or is in the process of being used, on more than 600 buildings nationwide. This Asset Score webinar is aimed at an audience of real estate and design professionals.

  11. Capturing Energy Efficiency Upgrades in the Real Estate Transaction

    Broader source: Energy.gov [DOE]

    "Capturing Energy Efficiency Upgrades in the Real Estate Transaction," by Residential Energy Efficiency Solutions, July 10, 2012. Describes the concept of a residential MPG number as a simple way of describing a home’s energy consumption.

  12. All About Solar and Real Estate | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    July 25, 2016 - 2:09pm Addthis All About Solar and Real Estate The number of U.S. households with rooftop solar is rapidly growing. The amount of grid-connected solar is expected to double in just two years. With this large number of PV homes in the U.S. and a continuing robust market for additional PV installations, an ever-increasing number of PV homes will likely be sold or refinanced. This week, SunShot is investigating the growing role that solar plays in real estate. Homeowners-both

  13. Acquisition, Use, and Disposal of Real Estate

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Acquisition of Capital Assets, or current version DOE Order 430.1B, Real Property Asset Management, or current version Overview This section provides internal Departmental ...

  14. REAL ESTATE & EQUIPMENT LEASING / RENTAL CALIFORNIA LAWRENCE BERKELEY LAB

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    REAL ESTATE & EQUIPMENT LEASING / RENTAL CALIFORNIA LAWRENCE BERKELEY LAB POC David Chen Telephone (510) 486-4506 Email dtchen@lbl.gov Construction, Mining, and Forestry Machinery and Equipment Rental and Leasing 532412 Office Machinery and Equipment Rental and Leasing 532420 LAWRENCE LIVERMORE LAB POC Jill Swanson Telephone (925) 423-4535 Email swanson6@llnl.gov Construction, Mining, and Forestry Machinery and Equipment Rental and Leasing 532412 Office Machinery and Equipment Rental and

  15. All About Solar and Real Estate | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    All About Solar and Real Estate With nearly one million solar energy systems installed on residential rooftops across the country, buying or selling a solar home is getting more and more common. Just like a renovated kitchen or a finished basement increases a home's value, solar has been shown to boost home valuation and shorten a home's time on the market. In addition, new borrowing tools give solar-interested homeowners access to financing programs that can lower the cost of capital and unlock

  16. Trends in Real Estate and Energy Efficiency-- Update on Program Experience

    Broader source: Energy.gov [DOE]

    Better Buildings Residential Network Program Sustainability Peer Exchange Call Series: Trends in Real Estate and Energy Efficiency, Call Slides and Discussion Summary, November 7, 2013.

  17. Acquisition Guide Chapter 17.3, Acquisition, Use, and Disposal of Real Estate

    Broader source: Energy.gov [DOE]

    The Acquisition Guide Chapter 17.3, Acquisition, Use, and Disposal of Real Estate, is updated to include the involvement of Certified Realty Specialist.

  18. Advances in Integrating Energy Efficiency Into the Real Estate Market (301)

    Office of Energy Efficiency and Renewable Energy (EERE)

    Better Buildings Residential Network Peer Exchange Call Series: Advances in Integrating Energy Efficiency into the Real Estate Market (301), call slides and discussion summary.

  19. Technical Qualifications for Treating Photovoltaic Assets as Real Property by Real Estate Investment Trusts (REITs)

    SciTech Connect (OSTI)

    Feldman, D.; Mendelsohn, M.; Coughlin, J.

    2012-06-01

    It has been proposed that Real Estate Investment Trusts (REITs) have the potential to lower the cost and increase the adoption of photovoltaic systems (PV) by offering a more attractive source of capital. The purpose of this paper is to explain the fundamental physical characteristics of PV and compare them to the characteristics of 'real' property, to help determine whether REITs can own PV systems.

  20. Business Models and Case Examples for Working with the Real Estate Sector

    Broader source: Energy.gov [DOE]

    Better Buildings Neighborhood Program: Business Models and Case Examples for Working with the Real Estate Sector, May 10, 2012: A discussion of business models and case examples for working with the real estate sector. Call Slides and Discussion Summary, May 10, 2012.

  1. Working with Real Estate Home Inspectors, Exterminators, and Other "Nontraditional" Partners

    Broader source: Energy.gov [DOE]

    Better Buildings Neighborhood Program Workforce / Business Partners Peer Exchange Call: Working with Real Estate Home Inspectors, Exterminators, and other “Nontraditional” Partners, Call Slides and Discussion Summary, February 28, 2013. This workforce/business partners peer exchange call discussed working with real estate home inspectors, exterminators, and other “non­traditional” partners.

  2. Home Performance XML to Real Estate Standards Organization Data Dictionary Translator

    Energy Science and Technology Software Center (OSTI)

    2015-10-27

    This translator takes fields from the HPXML and translates them into RESO’s Data Dictionary, which is used in MLS systems for real estate transactions across the country. The purpose is to get energy efficiency data into the real estate transaction.

  3. FIA-15-0008 - In the Matter of Real Estate Appraisal Litigation, LLC |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 8 - In the Matter of Real Estate Appraisal Litigation, LLC FIA-15-0008 - In the Matter of Real Estate Appraisal Litigation, LLC On March 30, 2015, OHA denied a FOIA Appeal filed by Mr. Jim L. Sanders of Real Estate Appraisal Litigation, LLC from a determination issued to him by the Bonneville Power Administration (BPA). In the Appeal, the Appellant challenged the adequacy of BPA's search for responsive documents as well as BPA's application of FOIA Exemption 6 to

  4. SunShot Spotlight: Solar and Real Estate | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SunShot Spotlight: Solar and Real Estate SunShot Spotlight: Solar and Real Estate SunShot Spotlight: Solar and Real Estate With nearly one million solar energy systems installed on residential rooftops across the country, buying or selling a solar home is getting more and more common. Just like a renovated kitchen or a finished basement increases a home's value, solar has been shown to boost home valuation and shorten a home's time on the market. In addition, new borrowing tools give

  5. SunShot Programs Bring Solar Energy Basics to Real Estate Pros | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy SunShot Programs Bring Solar Energy Basics to Real Estate Pros SunShot Programs Bring Solar Energy Basics to Real Estate Pros July 25, 2016 - 10:00am Addthis SunShot Programs Bring Solar Energy Basics to Real Estate Pros Dr. Becca Jones-Albertus Dr. Becca Jones-Albertus Acting Director, SunShot Initiative Fast Facts Recent research shows that adding solar to your home - much like renovating the kitchen or finishing the basement - can boost your home's value and resulting home sale

  6. Mastermind Session: Connecting the Dots Between the Real Estate Market and Residential Energy Efficiency

    Broader source: Energy.gov [DOE]

    Better Buildings Residential Network Program Sustainability Series Mastermind Call: Connecting the Dots Between the Real Estate Market and Residential Energy Efficiency Featuring Host Rich Dooley, Arlington County, VA, Call Slides and Discussion Summary, August 14, 2014.

  7. REAL ESTATE PROCESS | Department of Energy

    Office of Environmental Management (EM)

    1, 2014 Mr. Christopher Gentile, President Honeywell Federal Manufacturing & Technologies, LLC Kansas City Plant 2000 E 95th Street Kansas City, Missouri 64131 Dr. Paul Hommert, President and Laboratories Director Sandia Corporation Sandia National Laboratories P.O. Box 5800, MS 0101 Albuquerque, New Mexico 87185-0101 Dr. Raymond J. Juzaitis, President National Security Technologies, LLC Nevada National Security Site P.O. Box 98521, NSF001 Las Vegas, Nevada 89193-8521 Dr. Charles F.

  8. Mr. Edward L. Whelan Director, Real Estate Division Department...

    Office of Legacy Management (LM)

    ... Pt. ) offke 6 Service B;rilding 4,788 fJarchou5c & process ihlilding 15,494 Boiler 1?ouse ... Tsnk - Concrete' tow Preesura 621 Fired Steam Rdlers outside Stun L&e and Treat18 Fuel ...

  9. Amplifying Real Estate Value through Energy&WaterManagement: From ESCO to 'Energy Services Partner'

    SciTech Connect (OSTI)

    Mills, Evan

    2004-06-08

    The energy service company (ESCO) business model could become significantly more effective by integrating the energy-efficiency purveyor and their capital into the underlying building ownership and operation partnership, rather than the current model in which the ESCO remains an outsider with higher transaction costs and limited interest and participation in the value created by the cost savings. Resource conservation advocates rarely use the language of real estate to articulate the cost effectiveness of capital improvements aimed at reducing utility costs in commercial and residential income properties. Conventional methods that rely on rarefied academic notions of simple payback time or a narrow definition of return on investment fail to capture a significant component of the true market value created by virtue of reduced operating expenses. Improvements in energy and water efficiency can increase the fundamental profitability of real estate investments by raising Net Operating Income (NOI), and hence returns during the holding period, and, ultimately, proceeds at time of sale. We introduce the concept of an Energy Services Partner, who takes an equity interest in a real estate partnership in exchange for providing the expertise and capital required to reduce utility operating costs. Profit to all partners increases considerably as a result. This approach would also help to address a crisis facing ESCOs today stemming from their considerable liabilities (through guaranteed savings) and negligible offsetting assets.

  10. Capturing Energy Upgrades in the Real Estate Transaction

    Broader source: Energy.gov [DOE]

    Because green building techniques and products may impact the value of a home, they also affect the appraisal process when it comes to valuing residential properties. With the Cost Approach, the use of green features may increase the energy efficiency of a home but may add to the cost of that home’s reproduction or replacement. Appraisers employing the Cost Approach should look at how green features impact energy savings; how long a green product will last before it loses value; and if the use of green products (such as solar panels) detract from the curb appeal of the property.

  11. Better Buildings Neighborhood Program: Business Models and Case Examples for Working with the Real Estate Sector, May 10, 2012

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    May 10, 2012 Better Buildings Neighborhood Program Financing Peer Exchange Call: Business Models and Case Examples for Working with the Real Estate Sector Agenda * Call Logistics and Attendance  Is your program currently working with real estate sector (or are you thinking about doing so), and if so, how? * Program Experience and Lessons:  Cynthia Gunn, DOE  San Diego, CA: Jeremy Hutman, CCSE * Discussion:  What are some key strategies for engaging this sector?  How can the value

  12. Better Buildings Residential Network Peer Exchange Call Series: Trends in Real Estate and Energy Efficiency, Call Slides and Discussion Summary, January 22, 2015

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Trends in Real Estate and Energy Efficiency Call Slides and Discussion Summary January 22, 2015 Agenda  Call Logistics and Introductions  Opening Poll  Residential Network and Peer Exchange Call Overview  Featured Speakers  Pamela Brookstein, Elevate Energy  Craig Foley, RE/MAX Leading Edge, Chief of Energy Solutions  Discussion  What challenges have you encountered in working with the real estate sector?  What strategies have you used to engage real estate agents in

  13. Master Limited Partnerships and Real Estate Investment Trusts: Opportunities and Potential Complications for Renewable Energy

    SciTech Connect (OSTI)

    Feldman, D.; Settle, E.

    2013-11-01

    Master Limited Partnerships (MLPs) and Real Estate Investment Trusts (REITs) are two proposed investment vehicles which have the potential to lower renewable energy assets' high cost of capital; a critical factor in the Department of Energy's goal for renewable energy to achieve grid-parity with traditional sources of electric generation. Due to current U.S. federal income tax laws, regulations, and administrative interpretations, REITs and MLPs cannot finance a significant portion of the cost of renewable energy assets. Efforts are underway to alter these rules by changing the definition of 'real property' (REIT) and 'qualified income' (MLP). However, even with rule changes, both investment vehicles have structural challenges to efficiently finance renewable energy assets. Among them are 1) effectively utilizing the U.S. federal income tax incentives; 2) administratively structuring the investments to not be overly onerous or complicated, given the potential for pooling a relatively large amount of small assets; and 3) attracting and retaining a large enough investment community to participate in the funding opportunities. This report summarizes these challenges so that if proposed federal changes are made, stakeholders have an understanding of the possible outcomes.

  14. CHARACTERISTICS OF RANGE HOODS IN CALIFORNIA HOMES DATA COLLECTED FROM A REAL ESTATE WEB SITE

    SciTech Connect (OSTI)

    Klug, Victoria; Singer, Brett; Bedrosian, Tod; DCruz, Chris

    2011-09-02

    Venting range hoods are important residential ventilation components that remove pollutants generated by cooking activities and natural gas cooking burners. To address the lack of data on range hood installations in California, we conducted a survey by examining photographs of homes for sale or rent listed on a popular real estate web site. The survey was conducted in November 2010 and AprilMay 2011. Posted photos of the homes were reviewed to determine if a hood was installed, the type of hood, and two installation details that can impact performance, namely the height above the cooktop and the degree to which the hood covers the cooktop burners. We additionally collected information about the homes, including asking price for purchase or rent, type of building (e.g. detached house, townhouse or apartment), building age, floor area, and cooktop fuel type. Listings were first sampled to focus on homes built since 2005, then randomly sampled to include varied prices and locations around the state. Data were obtained for 1002 homes built between 1865 and 2011 (median year built 1989). Homes for sale varied in asking price from $16,000 to $16,500,000 (median $353,000) and homes for rent varied from $500 to $25,000 (median $2125) per month. Approximately 74% of the sample had natural gas cooktops. In this sample, natural gas cooktops were more prevalent in more expensive homes than in less expensive homes. Across the entire sample, 7.4 % appeared to have no hood installed, 33% had a short hood, 13% had a deep hood and 47% had a microwave over the range. The percentage of these hoods that vent to the outdoors could not be determined. Hood type was related to coverage of the cooktop. For deep hoods, 76% appeared to cover most or all of the cooktop burners. For short hoods, 70% covered about three quarters of the cooktop. And for microwaves the vast majority (96%) covered the back burners but not the front burners. Hood type was also correlated with asking price or

  15. Energy Department Announces Partnership with CoStar Group, Inc. to Expand Visibility of Energy-Efficient Buildings in U.S. Real Estate Marketplace

    Broader source: Energy.gov [DOE]

    As part of the Obama Administration's effort to cut energy waste in the America's buildings, the U.S. Department of Energy's Better Buildings Initiative today announced a partnership with CoStar Group, Inc., a provider of data and intelligence solutions to commercial real estate professionals, to expand the visibility of energy-efficient buildings in U.S. property markets and promote the benefits of energy efficiency for building owners and occupants.

  16. Smarter finance for cleaner energy: open up master limited partnerships (MLPs) and real estate investment trusts (REITs) to renewable energy investment

    SciTech Connect (OSTI)

    Mormann, Feliz; Reicher, Dan

    2012-11-15

    Master Limited Partnerships (MLPs) and Real Estate Investment Trusts (REITs)—both well-established investment structures—should be opened up to renewable energy investment. MLPs and, more recently, REITs have a proven track record for promoting oil, gas, and other traditional energy sources. When extended to renewable energy projects these tools will help promote growth, move renewables closer to subsidy independence, and vastly broaden the base of investors in America’s energy economy. The extension of MLPs and REITs to renewables enjoys significant support from the investment and clean energy communities. In addition, MLPs for renewables also enjoy bipartisan political backing in Congress.

  17. 2013 Real Property Desk Guide | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Real Property Desk Guide 2013 Real Property Desk Guide Real Estate Desk Guide - 2013 update.pdf (597.46 KB) More Documents & Publications REAL ESTATE PROPERTY GUIDE 2014 REAL ESTATE PROPERTY GUIDE 2013 OPAM Policy Acquisition Guides

  18. Valuing Green in the Appraisal Process - Building America Top...

    Energy Savers [EERE]

    Valuing Green in the Appraisal Process - Building America Top Innovation Real estate appraisers have historically faced challenges with green and energy efficient homes, both in ...

  19. Better Buildings Neighborhood Program Workforce/Business Partners Peer Exchange Call: Working with Real Estate Home Inspectors, Exterminators, and other Non-traditionalŽ Partners Call Slides and Discussion Summary, February 28, 2013

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    February 28, 2013 Better Buildings Neighborhood Program Workforce/Business Partners Peer Exchange Call: Working with Real Estate Home Inspectors, Exterminators, and other "Non-traditional" Partners Call Slides and Discussion Summary Agenda * Call Logistics and Attendance * Featured Program Experience  Ben Gromicko, International Association of Certified Home Inspectors (InterNACHI)  Dave Hatchimonji, Energy Smart, Boulder, CO * Discussion  What are opportunities to leverage

  20. Better Buildings Residential Network Program Sustainability Series Mastermind Call: Connecting the Dots Between the Real Estate Market and Residential Energy Efficiency Featuring Host Rich Dooley, Arlington County, VA, Call Slides and Discussion Summary

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Series Mastermind Call: Connecting the Dots Between the Real Estate Market and Residential Energy Efficiency Featuring Host: Rich Dooley, Arlington County, VA Call Slides and Discussion Summary August 14, 2014 Agenda  Welcome and Agenda  Call Logistics and Introductions (go-around and assignment of numbers)  Residential Network and Peer Exchange Call Overview  Mastermind Format  Opening Poll  Mastermind Session  Moderator: Jonathan Cohen, DOE  Host: Rich Dooley, Arlington

  1. real-estate-infographic-final

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    NUMBER OF SOLAR HOMES IN AMERICA IS GROWING QUICKLY THE NUMBER OF SOLAR HOMES IN AMERICA IS GROWING QUICKLY SOLAR HOMES SELL FOR MORE MONEY SOLAR HOMES SELL FOR MORE MONEY SUNSHOT INITIATIVE TRAINING PROGRAMS SUNSHOT INITIATIVE TRAINING PROGRAMS ON THE MARKET: BUYING & SELLING A SOLAR HOME ON THE MARKET: BUYING & SELLING A SOLAR HOME The number of households with solar energy systems in the U.S. is expected to surpass 1,000,000 this year. With this large number of solar homes in the U.S.

  2. Vector processing enhancements for real-time image analysis.

    SciTech Connect (OSTI)

    Shoaf, S.; APS Engineering Support Division

    2008-01-01

    A real-time image analysis system was developed for beam imaging diagnostics. An Apple Power Mac G5 with an Active Silicon LFG frame grabber was used to capture video images that were processed and analyzed. Software routines were created to utilize vector-processing hardware to reduce the time to process images as compared to conventional methods. These improvements allow for more advanced image processing diagnostics to be performed in real time.

  3. Real ID Act in brief

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Real Estate Approvals Real Estate Approvals Real Estate Approvals Policy Flash 2011-61, Acquisition Guide Chapter 17.3, Acquisition, Use, and Disposal of Real Estate (attachment)

    Visitors » Badging, Badge Office » Real ID Act in brief Real ID Act in brief Effective Nov. 3, 2014, the Lab will implement requirements of the REAL ID Act. Contact Badge Office (505) 667-6901 Email REAL ID Act in brief REAL ID is a coordinated effort by the states and the Federal Government to improve the

  4. Real-time graphic displays in Mars. [AVLIS process

    SciTech Connect (OSTI)

    Treadway, T.

    1985-12-01

    Real-time diagnostic data of the AVLIS process is displayed in the form of a two-dimensional plot on selected monitors in the Mars Control Room. Each Mars workstation contains a HP2622 terminal for computer interface to the experiment and a Raster Technologies graphic controller driving a Conrac high resolution color monitor for graphics output.

  5. Real-time Process Monitoring and Temperature Mapping of the 3D...

    Office of Scientific and Technical Information (OSTI)

    Real-time Process Monitoring and Temperature Mapping of the 3D Polymer Printing Process Citation Details In-Document Search Title: Real-time Process Monitoring and Temperature ...

  6. Building Energy Asset Score: Real Estate Managers

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy's Building Energy Asset Score is a national standardized tool for evaluating the physical and structural energy efficiency of commercial and multifamily residential buildings. The Asset Score generates a simple energy efficiency rating that enables comparison among buildings, and identifies opportunities for users to invest in energy efficiency upgrades. It is web-based and free to use.

  7. Energy considerations in real estate appraising

    SciTech Connect (OSTI)

    1980-04-01

    Purposes of the seminar on the subject, the basis of this report, include the following: (1) to provide the appraiser an opportunity to learn how to identify and analyze the actual physical consumption of energy as well as the energy-saving improvements in properties under appraisal and in comparable sale and lease properties; (2) to help the appraiser in developing methods to keep meaningful records on the energy consumption of subject and comparable properties so as to observe in an orderly way the behavior of buyers, sellers, tenants, landlords, borrowers, and lenders with respect to energy efficiency; and (3) to assist the appraiser in learning to measure the relative sensitivities of the various segments of the market to energy considerations as indicated by differences in sale prices and rentals. To achieve these goals, the seminar employed two case studies, one for a angle-family residence and one for a multi-family building, both in Topeka, Kansas. The case studies are for illustrative purposes only; in applying the lessons of the seminar to their own daily work, students should be careful to develop information that is pertinent to their subject properties and subject areas and not rely on any of the particulars laid out in the cases.

  8. V-114: RealPlayer MP4 Processing Buffer Overflow Vulnerability | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy 14: RealPlayer MP4 Processing Buffer Overflow Vulnerability V-114: RealPlayer MP4 Processing Buffer Overflow Vulnerability March 19, 2013 - 12:01am Addthis PROBLEM: RealPlayer MP4 Processing Buffer Overflow Vulnerability PLATFORM: Versions prior to 16.0.1.18. ABSTRACT: A vulnerability has been reported in RealPlayer REFERENCE LINKS: RealNetworks, Inc Secunia Advisory SA52692 CVE-2013-1750 IMPACT ASSESSMENT: High DISCUSSION: The vulnerability is caused due to an error when

  9. Review of processes for the release of DOE real and non-real property for reuse and recycle

    SciTech Connect (OSTI)

    Ranek, N.L.; Kamboj, S.; Hensley, J.; Chen, S.Y.; Blunt, D.

    1997-11-01

    This report summarizes the underlying historical and regulatory framework supporting the concept of authorizing release for restricted or unrestricted reuse or recycle of real and non-real U.S. Department of Energy (DOE) properties containing residual radioactive material. Basic radiation protection principles as recommended by the International Commission on Radiological Protection are reviewed, and international initiatives to investigate radiological clearance criteria are reported. Applicable requirements of the U.S. Nuclear Regulatory Commission, the Environmental Protection Agency, DOE, and the State of Washington are discussed. Several processes that have been developed for establishing cleanup and release criteria for real and non-real DOE property containing residual radioactive material are presented. Examples of DOE real property for which radiological cleanup criteria were established to support unrestricted release are provided. Properties discussed include Formerly Utilized Sites Remedial Action Project sites, Uranium Mill Tailings Remedial Action Project sites, the Shippingport decommissioning project, the south-middle and south-east vaults in the 317 area at Argonne National Laboratory, the Heavy Water Components Test Reactor at DOE`s Savannah River Site, the Experimental Boiling Water Reactor at Argonne National Laboratory, and the Weldon Spring site. Some examples of non-real property for which DOE sites have established criteria to support unrestricted release are also furnished. 10 figs., 4 tabs.

  10. Process for fabricating device structures for real-time process control of silicon doping

    DOE Patents [OSTI]

    Weiner, Kurt H.

    2001-01-01

    Silicon device structures designed to allow measurement of important doping process parameters immediately after the doping step has occurred. The test structures are processed through contact formation using standard semiconductor fabrication techniques. After the contacts have been formed, the structures are covered by an oxide layer and an aluminum layer. The aluminum layer is then patterned to expose the contact pads and selected regions of the silicon to be doped. Doping is then performed, and the whole structure is annealed with a pulsed excimer laser. But laser annealing, unlike standard annealing techniques, does not effect the aluminum contacts because the laser light is reflected by the aluminum. Once the annealing process is complete, the structures can be probed, using standard techniques, to ascertain data about the doping step. Analysis of the data can be used to determine probable yield reductions due to improper execution of the doping step and thus provide real-time feedback during integrated circuit fabrication.

  11. Real-time Process Monitoring and Temperature Mapping of the 3D Polymer

    Office of Scientific and Technical Information (OSTI)

    Printing Process (Conference) | SciTech Connect Real-time Process Monitoring and Temperature Mapping of the 3D Polymer Printing Process Citation Details In-Document Search Title: Real-time Process Monitoring and Temperature Mapping of the 3D Polymer Printing Process An extended range IR camera was used to make temperature measurements of samples as they are being manufactured. The objective is to quantify the temperature variation inside the system as parts are being fabricated, as well as

  12. Manzanita Estates District Heating Low Temperature Geothermal...

    Open Energy Info (EERE)

    Manzanita Estates District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Manzanita Estates District Heating Low Temperature Geothermal Facility...

  13. Real States EOOD | Open Energy Information

    Open Energy Info (EERE)

    real estate company active in PV project development. Coordinates: 42.697085, 23.32455 Show Map Loading map... "minzoom":false,"mappingservice":"googlemaps3","type":"...

  14. Application of commercial simulator to reproduce a real natural gas processing unit

    SciTech Connect (OSTI)

    Gomes, L.G.; Maciel, M.R.W.

    1996-12-31

    In this work the intention is, using a commercial simulator, to reproduce the operating conditions of a Natural Gas Processing Unit. This is a complex task since in a real plant there are several kinds of equipments, accessories and designs that the most important available simulators cannot represent properly. This being the case, in this study, the simulation has been built in a unique computer file, simulating 48 equipments and 16 valves of the process unit. It was created five additional equipments and some adjust, recycle and set operations to adjust the simulator equipments to the real ones. The simulations has 84 operations and 116 streams of mass and energy. To bring near the column internal flows and temperatures to the real values, it were incorporated the column stage efficiencies, using a method, beginning with O`Connell global efficiency. 7 refs., 4 tabs.

  15. Parallel processing algorithms and architectures for real-time signal processing

    SciTech Connect (OSTI)

    Speiser, J.M.; Whitehouse, H.J.

    1981-01-01

    Emphasis is placed on progress toward the hardware realization of a numerical linear algebra library of functions. The objective is to utilize VLSI/VHSIC technology in parallel architectures to provide a real-time equivalent of the Linpack/Eispack capabilities. The authors discuss new architectures for the multiplication of dense matrices, configurations for partitioned matrix operations, and applications to crossambiguity function calculation. 12 references.

  16. In-Situ Real Time Monitoring and Control of Mold Making and Filling Processes

    SciTech Connect (OSTI)

    None

    2004-11-01

    This factsheet describes a research effort to develop an innovative approach to introduce technologies for real-time characterization of sand molds, lost foam patterns, and monitoring of the mold filling process. This will reduce scrap, improve product quality, and save energy.

  17. Development of a process for releasing non-real property under order DOE 5400.5.

    SciTech Connect (OSTI)

    Warren, S.; Ranek, N. L.; Hensley, J.; Environmental Assessment; DOE

    1998-01-01

    It is the policy of the U.S. Department of Energy (DOE) to improve environmental quality and conserve natural and economic resources by, among other things, increasing the reuse and recycle of recoverable materials in order to minimize land disposal of wastes. Consistent with this policy, DOE's Office of Environmental Management believes it is important to pursue strategies for reusing and recycling the large and growing DOE inventory of recoverable non-real property. However, responsible pursuit of such strategies requires careful prior consideration of the available alternatives, given the radiological character of much of the non-real property to be released. Requirements applicable to considerations of this type are established by Order DOE 5400.5, Radiation Protection of the Public and the Environment. This article describes the development and content of a step-by-step process designed to provide confidence that radiological doses to the public from recycle or reuse of released non-real property containing residual radioactive material meet applicable regulatory standards, are as low as reasonably achievable, and meet the requirements in Order DOE 5400.5 for release of such material. The full process, described in the Draft Handbook for Controlling Release for Reuse or Recycle of Non-Real Property Containing Residual Radioactive Material (for interim use and comment), DOE-HDBK-xxxx-97 (June 1997), is available for viewing and downloading at http://www.em.doe.gov/recyc.

  18. In-Situ Real Time Monitoring and Control of Mold Making and Filling Processes: Final Report

    SciTech Connect (OSTI)

    Mohamed Abdelrahman; Kenneth Currie

    2010-12-22

    This project presents a model for addressing several objectives envisioned by the metal casting industries through the integration of research and educational components. It provides an innovative approach to introduce technologies for real time characterization of sand molds, lost foam patterns and monitoring of the mold filling process. The technology developed will enable better control over the casting process. It is expected to reduce scrap and variance in the casting quality. A strong educational component is integrated into the research plan to utilize increased awareness of the industry professional, the potential benefits of the developed technology, and the potential benefits of cross cutting technologies.

  19. Real-Time Detection Methods to Monitor TRU Compositions in UREX+Process Streams

    SciTech Connect (OSTI)

    McDeavitt, Sean; Charlton, William; Indacochea, J Ernesto; taleyarkhan, Rusi; Pereira, Candido

    2013-03-01

    The U.S. Department of Energy has developed advanced methods for reprocessing spent nuclear fuel. The majority of this development was accomplished under the Advanced Fuel Cycle Initiative (AFCI), building on the strong legacy of process development R&D over the past 50 years. The most prominent processing method under development is named UREX+. The name refers to a family of processing methods that begin with the Uranium Extraction (UREX) process and incorporate a variety of other methods to separate uranium, selected fission products, and the transuranic (TRU) isotopes from dissolved spent nuclear fuel. It is important to consider issues such as safeguards strategies and materials control and accountability methods. Monitoring of higher actinides during aqueous separations is a critical research area. By providing on-line materials accountability for the processes, covert diversion of the materials streams becomes much more difficult. The importance of the nuclear fuel cycle continues to rise on national and international agendas. The U.S. Department of Energy is evaluating and developing advanced methods for safeguarding nuclear materials along with instrumentation in various stages of the fuel cycle, especially in material balance areas (MBAs) and during reprocessing of used nuclear fuel. One of the challenges related to the implementation of any type of MBA and/or reprocessing technology (e.g., PUREX or UREX) is the real-time quantification and control of the transuranic (TRU) isotopes as they move through the process. Monitoring of higher actinides from their neutron emission (including multiplicity) and alpha signatures during transit in MBAs and in aqueous separations is a critical research area. By providing on-line real-time materials accountability, diversion of the materials becomes much more difficult. The objective of this consortium was to develop real time detection methods to monitor the efficacy of the UREX+ process and to safeguard the separated

  20. Warren Estates District Heating Low Temperature Geothermal Facility...

    Open Energy Info (EERE)

    Warren Estates District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Warren Estates District Heating Low Temperature Geothermal Facility Facility...

  1. Rukminibai Estate Investment Pvt Ltd | Open Energy Information

    Open Energy Info (EERE)

    Rukminibai Estate Investment Pvt Ltd Jump to: navigation, search Name: Rukminibai Estate & Investment Pvt. Ltd. Place: Mumbai, Maharashtra, India Zip: 400 025 Sector: Biomass...

  2. San Luis Bay Estates Pool & Spa Low Temperature Geothermal Facility...

    Open Energy Info (EERE)

    Estates Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name San Luis Bay Estates Pool & Spa Low Temperature Geothermal Facility Facility San Luis Bay...

  3. Comision Estatal de Energia CEE | Open Energy Information

    Open Energy Info (EERE)

    Comision Estatal de Energia CEE Jump to: navigation, search Name: Comision Estatal de Energia (CEE) Place: Mexico Sector: Renewable Energy Product: Baja California-based state...

  4. Real time explosive hazard information sensing, processing, and communication for autonomous operation

    SciTech Connect (OSTI)

    Versteeg, Roelof J; Few, Douglas A; Kinoshita, Robert A; Johnson, Doug; Linda, Ondrej

    2015-02-24

    Methods, computer readable media, and apparatuses provide robotic explosive hazard detection. A robot intelligence kernel (RIK) includes a dynamic autonomy structure with two or more autonomy levels between operator intervention and robot initiative A mine sensor and processing module (ESPM) operating separately from the RIK perceives environmental variables indicative of a mine using subsurface perceptors. The ESPM processes mine information to determine a likelihood of a presence of a mine. A robot can autonomously modify behavior responsive to an indication of a detected mine. The behavior is modified between detection of mines, detailed scanning and characterization of the mine, developing mine indication parameters, and resuming detection. Real time messages are passed between the RIK and the ESPM. A combination of ESPM bound messages and RIK bound messages cause the robot platform to switch between modes including a calibration mode, the mine detection mode, and the mine characterization mode.

  5. Real time explosive hazard information sensing, processing, and communication for autonomous operation

    SciTech Connect (OSTI)

    Versteeg, Roelof J.; Few, Douglas A.; Kinoshita, Robert A.; Johnson, Douglas; Linda, Ondrej

    2015-12-15

    Methods, computer readable media, and apparatuses provide robotic explosive hazard detection. A robot intelligence kernel (RIK) includes a dynamic autonomy structure with two or more autonomy levels between operator intervention and robot initiative A mine sensor and processing module (ESPM) operating separately from the RIK perceives environmental variables indicative of a mine using subsurface perceptors. The ESPM processes mine information to determine a likelihood of a presence of a mine. A robot can autonomously modify behavior responsive to an indication of a detected mine. The behavior is modified between detection of mines, detailed scanning and characterization of the mine, developing mine indication parameters, and resuming detection. Real time messages are passed between the RIK and the ESPM. A combination of ESPM bound messages and RIK bound messages cause the robot platform to switch between modes including a calibration mode, the mine detection mode, and the mine characterization mode.

  6. Promoting High-Performance Homes to Portland Real Estate Pros

    Broader source: Energy.gov [DOE]

    Two Portland, Oregon-based Better Buildings Residential Network members—the City of Portland Bureau of Planning and Sustainability and Clean Energy Works (CEW)—are supporting Earth Advantage’s...

  7. Asset Score Webinar Slides: Real Estate and Design Professionals...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    by DOE and the Pacific Northwest National Laboratory (PNNL) that assesses the physical and structural energy efficiency of commercial and multifamily residential buildings. ...

  8. Promoting High-Performance Homes to Portland Real Estate Pros...

    Energy Savers [EERE]

    "Home performance upgrades not only create healthier, safer, more comfortable places to live, but they also increase the value of our homes," said Derek Smith, CEW chief executive ...

  9. Real-time optical diagnostics for the basic oxygen steelmaking process

    SciTech Connect (OSTI)

    Ottesen, D.K.; Hurt, R.H.; Hardesty, D.R.

    1993-02-01

    This article deals with the development of real-time optical diagnostic techniques for process control in basic oxygen steelmaking. Results are presented of pilot-scale feasibility experiments conducted in the two-ton basic oxygen furnace (BOF) at Bethlehem Steel Corporation`s Homer Research Laboratories. Two line-of-sight optical techniques are being evaluated for determining the concentration and temperature of infrared-active gases in the BOF off-gas. The primary objective is to relate the concentration of these gas-phase species to the carbon content of the molten metal, and thereby provide a real-time indication of the process endpoint. Three cw lasers were used to measure the extent of beam attenuation at three different wavelengths in the particle-laden off-gas. The primary attenuation mechanism appears to be scattering by a dense, sub-micron diameter FeO fume. Initial infrared emission experiments with a Fourier transform infrared spectrometer at 1-cm{sup {minus}1} spectral resolution show partially resolved lines in the P-branch of the fundamental CO ground state and first hot-band transitions; CO{sub 2} bandheads are also clearly observed at 2384 and 2397 cm{sup {minus}1}. A second set of experiments was conducted to test the feasibility of oxygen-lance based fiber-optic imaging/pyrometric sensors for measurements of melt temperature and reaction zone properties. During bottom injection of nitrogen, clearly defined images of the melt/slag surface were obtained using both visible and near-infrared video systems. During oxygen blowing, optical emission from the hot spot was observed to fluctuate widely, with characteristic frequencies in the range of 3--10 Hz. Near the end of the process, the emission is characterized by periodic intensity bursts, interpreted as individual ignition events of duration 10--50 msec. Hot spot temperatures were calculated from the emission at 800 and 950 nm wavelengths using a grey-body assumption.

  10. Release process for non-real property containing residual radioactive material

    SciTech Connect (OSTI)

    Ranek, N.L.; Chen, S.Y.; Kamboj, S.; Hensley, J.; Burns, D.; Fleming, R.; Warren, S.; Wallo, A.

    1997-02-01

    It is DOE`s objective to operate its facilities and to conduct its activities so that radiation exposures to members of the public are maintained within acceptable limits and exposures to residual radioactive materials are controlled. To accomplish this, DOE has adopted Order DOE 5400.51 `Radiation Protection of the Public and the Environment`, and will be promulgating IO CR Part 834 to codify and clarify the requirements of DOE 5400.5. Under both DOE 5400.5 and 10 CR Part 834, radioactively contaminated DOE property is prohibited from release unless specific actions have been completed prior to the release. This paper outlines a ten-step process that, if followed, will assist DOE Operations and contractor personnel in ensuring that the required actions established by Order DOE 5400.5 and 10 CR Part 834 have been appropriately completed prior to the release for reuse or recycle of non-real property (e.g., office furniture, computers, hand tools, machinery, vehicles and scrap metal). Following the process will assist in ensuring that radiological doses to the public from the released materials will meet applicable regulatory standards and be as low as reasonably achievable (ALARA).

  11. Real time intelligent process control system for thin film solar cell manufacturing

    SciTech Connect (OSTI)

    George Atanasoff

    2010-10-29

    This project addresses the problem of lower solar conversion efficiency and waste in the typical solar cell manufacturing process. The work from the proposed development will lead toward developing a system which should be able to increase solar panel conversion efficiency by an additional 12-15% resulting in lower cost panels, increased solar technology adoption, reduced carbon emissions and reduced dependency on foreign oil. All solar cell manufacturing processes today suffer from manufacturing inefficiencies that currently lead to lower product quality and lower conversion efficiency, increased product cost and greater material and energy consumption. This results in slower solar energy adoption and extends the time solar cells will reach grid parity with traditional energy sources. The thin film solar panel manufacturers struggle on a daily basis with the problem of thin film thickness non-uniformity and other parameters variances over the deposited substrates, which significantly degrade their manufacturing yield and quality. Optical monitoring of the thin films during the process of the film deposition is widely perceived as a necessary step towards resolving the non-uniformity and non-homogeneity problem. In order to enable the development of an optical control system for solar cell manufacturing, a new type of low cost optical sensor is needed, able to acquire local information about the panel under deposition and measure its local characteristics, including the light scattering in very close proximity to the surface of the film. This information cannot be obtained by monitoring from outside the deposition chamber (as traditional monitoring systems do) due to the significant signal attenuation and loss of its scattering component before the reflected beam reaches the detector. In addition, it would be too costly to install traditional external in-situ monitoring systems to perform any real-time monitoring over large solar panels, since it would require

  12. Rube Goldberg 2013 - Hoffman Estates High School | Argonne National

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratory Rube Goldberg 2013 - Hoffman Estates High School Share Topic Community Education Rube Goldberg Machine Contest

  13. Valuing Green in the Appraisal Process - Building America Top Innovation |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Valuing Green in the Appraisal Process - Building America Top Innovation Valuing Green in the Appraisal Process - Building America Top Innovation Real estate appraisers have historically faced challenges with green and energy efficient homes, both in identifying comparables and in supporting adjustments for improvements. These difficulties stem BARA Green Addendum Top Innov 2014-2.jpg from many reasons, including data gaps in commonly used information systems and lender

  14. Valuing Green in the Appraisal Process - Building America Top...

    Broader source: Energy.gov (indexed) [DOE]

    Real estate appraisers have historically faced challenges with green and energy efficient homes, both in identifying comparables and in supporting adjustments for improvements. ...

  15. Final Report: Preliminary Process and Market Evaluation: Better...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... described the current depression in the home real estate market as undermining that proposition. 56 savings as their primary motive for seeking the audit and making upgrades. ...

  16. Acoustic sensor for real-time control for the inductive heating process

    DOE Patents [OSTI]

    Kelley, John Bruce; Lu, Wei-Yang; Zutavern, Fred J.

    2003-09-30

    Disclosed is a system and method for providing closed-loop control of the heating of a workpiece by an induction heating machine, including generating an acoustic wave in the workpiece with a pulsed laser; optically measuring displacements of the surface of the workpiece in response to the acoustic wave; calculating a sub-surface material property by analyzing the measured surface displacements; creating an error signal by comparing an attribute of the calculated sub-surface material properties with a desired attribute; and reducing the error signal below an acceptable limit by adjusting, in real-time, as often as necessary, the operation of the inductive heating machine.

  17. Real-time Process Monitoring and Temperature Mapping of the 3D...

    Office of Scientific and Technical Information (OSTI)

    The observation of the temperature variation of a part that fails during construction provides insight into how the deposition process itself impacts temperature distribution ...

  18. Profiling Real-Time Electricity Consumption Data for Process Monitoring and Control

    SciTech Connect (OSTI)

    Omitaomu, Olufemi A

    2013-01-01

    Today, smart meters serve as key assets to utilities and their customers because they are capable of recording and communicating real-time energy usage data; thus, enabling better understanding of energy usage patterns. Other potential benefits of smart meters data include the ability to improve customer experience, grid reliability, outage management, and operational efficiency. Despite these tangible benefits, many utilities are inundated by data and remain uncertain about how to extract additional value from these deployed assets outside of billing operations. One way to overcome this challenge is the development of new metrics for classifying utility customers. Traditionally, utilities classified their customers based on their business nature (residential, commercial, and industrial) and/or their total annual consumption. While this classification is useful for some operational functions, it is too limited for designing effective monitoring and control strategies. In this paper, a data mining methodology is proposed for clustering and profiling smart meters data in order to form unique classes of customers exhibiting similar usage patterns. The developed clusters could help utilities in identifying opportunities for achieving some of the benefits of smart meters data.

  19. Gun Club Estates, Florida: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Gun Club Estates, Florida: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 26.6753439, -80.1072651 Show Map Loading map... "minzoom":false,"map...

  20. Hoffman Estates, Illinois: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hoffman Estates, Illinois: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 42.0428051, -88.079795 Show Map Loading map... "minzoom":false,"mapp...

  1. Process of Equiaxed Grains of RE-Al Alloy under Slope Vibration

    SciTech Connect (OSTI)

    Xie Shikun; Yi Rongxi; Pan Xiaoliang; Zheng Xiaoqiu; Guo Xiuyan [School of Engineering, Jinggangshan University, Ji'an, 343009 (China)

    2010-06-15

    A new technique using slope vibration casting process during heating and isothermal holding period to prepare Al-7Si-2RE alloy has been studied. The small, near-spherical and non-dendritic microstructure with the semi-solid processing requirements has been obtained. Experiments show that the cooling method, pouring process and the convection of melt caused by slope vibration had significant effects on the formation of near-spherical primary gains. The water-cooled copper mold casting with slope vibration at the temperature near liquidus can obtain Al-7Si-2RE alloy with small homogeneous equiaxed grains, the average grain diameter is 48.3 mum, and the average grain roundness is 1.92.

  2. Use of miniature magnetic sensors for real-time control of the induction heating process

    DOE Patents [OSTI]

    Bentley, Anthony E. (Tijeras, NM); Kelley, John Bruce (Albuquerque, NM); Zutavern, Fred J. (Albuquerque, NM)

    2002-01-01

    A method of monitoring the process of induction heating a workpiece. A miniature magnetic sensor located near the outer surface of the workpiece measures changes in the surface magnetic field caused by changes in the magnetic properties of the workpiece as it heats up during induction heating (or cools down during quenching). A passive miniature magnetic sensor detects a distinct magnetic spike that appears when the saturation field, B.sub.sat, of the workpiece has been exceeded. This distinct magnetic spike disappears when the workpiece's surface temperature exceeds its Curie temperature, due to the sudden decrease in its magnetic permeability. Alternatively, an active magnetic sensor can also be used to measure changes in the resonance response of the monitor coil when the excitation coil is linearly swept over 0-10 MHz, due to changes in the magnetic permeability and electrical resistivity of the workpiece as its temperature increases (or decreases).

  3. Mineral Resource Information System for Field Lab in the Osage Mineral Reservation Estate

    SciTech Connect (OSTI)

    Carroll, H.B.; Johnson, William I.

    1999-04-27

    The Osage Mineral Reservation Estate is located in Osage County, Oklahoma. Minerals on the Estate are owned by members of the Osage Tribe who are shareholders in the Estate. The Estate is administered by the Osage Agency, Branch of Minerals, operated by the U.S. Bureau of Indian Affairs (BIA). Oil, natural gas, casinghead gas, and other minerals (sand, gravel, limestone, and dolomite) are exploited by lessors. Operators may obtain from the Branch of Minerals and the Osage Mineral Estate Tribal Council leases to explore and exploit oil, gas, oil and gas, and other minerals on the Estate. Operators pay a royalty on all minerals exploited and sold from the Estate. A mineral Resource Information system was developed for this project to evaluate the remaining hydrocarbon resources located on the Estate. Databases on Microsoft Excel spreadsheets of operators, leases, and production were designed for use in conjunction with an evaluation spreadsheet for estimating the remaining hydrocarbons on the Estate.

  4. Table of Contents for Desk Guide

    Office of Environmental Management (EM)

    ... real estate process: from planning, to acquisition, through ... to matters or problems encountered in real estate projects. ... Emergency Contractor Leasing If space is needed to house ...

  5. Proof of Concept Simulations of the Multi-Isotope Process Monitor: An Online, Nondestructive, Near-Real-Time Safeguards Monitor for Nuclear Fuel Reprocessing Facilities

    SciTech Connect (OSTI)

    Orton, Christopher R.; Fraga, Carlos G.; Christensen, Richard; Schwantes, Jon M.

    2011-02-11

    The International Atomic Energy Agency (IAEA) will require the development of advanced technologies to effectively safeguard nuclear material at increasingly large-scale nuclear recycling facilities. Ideally, the envisioned technologies would be capable of nondestructive, near-real-time, autonomous process monitoring. This paper describes recent results from model simulations designed to test the Multi-Isotope Process (MIP) monitor, a novel approach to safeguarding reprocessing plants. The MIP monitor combines the detection of intrinsic gamma ray signatures emitted from process solutions with multivariate analysis to detect off-normal conditions in process streams nondestructively and in near-real-time. Three computer models including ORIGEN-ARP, AMUSE, and SYNTH were used in series to predict spent nuclear fuel composition, estimate element partitioning during separation, and simulate spectra from product and raffinate streams using a variety of gamma detectors, respectively. Simulations were generated for fuel with various irradiation histories and under a variety of plant operating conditions. Principal component analysis (PCA) was applied to the simulated gamma spectra to investigate pattern variations as a function of acid concentration, burnup, and cooling time. Hierarchical cluster analysis (HCA) and partial least squares (PLS) were also used in the analysis. The MIP monitor was found to be sensitive to induced variations of several operating parameters including distinguishing ±2.5% variation from normal process acid concentrations. The ability of PLS to predict burnup levels from simulated spectra was also demonstrated to be within 3.5% of measured values.

  6. MONITORING SPENT NUCLEAR FUEL REPROCESSING CONDITIONS NON-DESTRUCTIVELY AND IN NEAR-REAL-TIME USING THE MULTI-ISOTOPE PROCESS (MIP) MONITOR

    SciTech Connect (OSTI)

    Orton, Christopher R.; Fraga, Carlos G.; Douglas, Matthew; Christensen, Richard; Schwantes, Jon M.

    2010-05-07

    Researchers from Pacific Northwest National Laboratory and The Ohio State University are working to develop a system for monitoring spent nuclear fuel reprocessing facilities on-line, nondestructively, and in near-real-time. This method, known as the Multi-Isotope Process (MIP) Monitor, is based upon the measurement of distribution patterns of a suite of indicator (radioactive) isotopes present within product and waste streams of a nuclear reprocessing facility. Signatures from these indicator isotopes are monitored on-line by gamma spectrometry and compared, in near-real-time, to patterns representing "normal" process conditions using multivariate pattern recognition software. By targeting gamma-emitting indicator isotopes, the MIP Monitor approach is compatible with the use of small, portable, high-resolution gamma detectors that may be easily deployed throughout an existing facility. In addition, utilization of a suite of radio-elements, including ones with multiple oxidation states, increases the likelihood that attempts to divert material via process manipulation would be detected. Proof-of-principle modeling exercises simulating changes in acid strength have been completed and the results are promising. Laboratory testing is currently under way and significant results are available. Recent experimental results, along with an overview of the method are presented.

  7. THE MULTI-ISOTOPE PROCESS (MIP) MONITOR: A NEAR-REAL-TIME, NON-DESTRUCTIVE, INDICATOR OF SPENT NUCLEAR FUEL REPROCESSING CONDITIONS

    SciTech Connect (OSTI)

    Schwantes, Jon M.; Orton, Christopher R.; Fraga, Carlos G.; Douglas, Matthew; Christensen, Richard

    2010-05-07

    Researchers from Pacific Northwest National Laboratory and The Ohio State University are working to develop a system for monitoring spent nuclear fuel reprocessing facilities on-line, non-destructively, and in near-real-time. This method, known as the Multi-Isotope Process (MIP) Monitor, is based upon the measurement of distribution patterns of a suite of indicator (radioactive) isotopes present within product and waste streams of a nuclear reprocessing facility. Signatures from these indicator isotopes are monitored on-line by gamma spectrometry and compared, in near-real-time, to patterns representing "normal" process conditions using multivariate pattern recognition software. By targeting gamma-emitting indicator isotopes, the MIP Monitor approach is compatible with the use of small, portable, high-resolution gamma detectors that may be easily deployed throughout an existing facility. In addition, utilization of a suite of radio-elements, including ones with multiple oxidation states, increases the likelihood that attempts to divert material via process manipulation would be detected. Proof-of-principle modeling exercises simulating changes in acid strength have been completed and the results are promising. Laboratory validation is currently under way and significant results are available. The latest experimental results, along with an overview of the method will be presented.

  8. Real-time observation of dynamic process of oxygen vacancy migration in cerium oxides under electric field

    SciTech Connect (OSTI)

    Li, Xiaomin; Qi, Kuo; Sun, Muhua; Huang, Qianming; Xu, Zhi E-mail: xdbai@iphy.ac.cn; Wang, Wenlong; Bai, Xuedong E-mail: xdbai@iphy.ac.cn

    2015-11-23

    The dynamic process of oxygen vacancy migration driven by the external electric field is directly observed at atomic scale in the cerium oxides (CeO{sub 2}) thin film by in-situ transmission electron microscopy method. When a bias voltage of a proper value is applied across the CeO{sub 2} film, the oxygen vacancies are formed near the interface of CeO{sub 2}/anode, followed by their migration along the direction of the external electric field. The structural modulation occurs in the [110] zone axis due to the ordering of oxygen vacancies. The migration of oxygen vacancies results in the reversible structural transformation, i.e., releasing and storing oxygen processes in CeO{sub 2}, which is of great significance for the ionic and electronic applications of the cerium oxides materials, such as oxygen pump, gas sensor, resistive random access memory, etc.

  9. PROJECT PROFILE: Solar PV and Real Estate: Harnessing Big Data to Drive

    Office of Environmental Management (EM)

    Agira Inc. (CSP: COLLECTS) PROJECT PROFILE: Agira Inc. (CSP: COLLECTS) Project Name: Unique Single-Axis Tracking Planar Waveguide Optical Collector for CSP Modules Funding Opportunity: CSP: COLLECTS SunShot Subprogram: CSP Location: Boston, MA SunShot Award Amount: $628,478 Awardee Cost Share: $160,375 Agira is developing a very low-cost, flat optical collector based on refraction and total-internal reflection at optical interfaces between silicone polymers of different refractive indices.

  10. Valuing Energy Efficiency: Considering Energy Performance in Real Estate Appraisals and Valuation

    Broader source: Energy.gov [DOE]

    Presenters: John Scott, Colliers International; Devesh Nirmul, Inspyrod; Theddi Wright Chappell, Sustainable Values

  11. Development of a Density Sensor for In-Line Real-Time Process Control and Monitoring of Slurries during Radioactive Waste Retrieval and Transport Operations at DOE Sites

    SciTech Connect (OSTI)

    Bamberger, Judith A.; Greenwood, Margaret S.

    2001-11-19

    A density sensor (densimeter) to monitor and control slurries in-line real-time during radioactive waste retrieval and transport and detect conditions leading to degraded transport and line plugging is described. Benefits over baseline grab samples and off line analysis include: early detection and prevention of pipeline plugging, real-time density through the transfer process, elimination of grab sampling and off-line analysis, and reduced worker radiation exposure. The sensor is small, robust and could be retrofitted into existing pump pit manifolds and transfer lines. The probe uses ultrasonic signal reflection at the fluid-pipe wall interface to quantify density and features include: a non-intrusive sensing surface located flush with the pipeline wall; performance that is not affected by entrained air or by electromagnetic noise from nearby pumps and other equipment and is compact. Components were tested for chemical and radiation resistance and the spool piece was pressure tested in accordance with ASME Process Piping Code B31.3 and approved by the Hanford Site Flammable Gas Equipment Advisory Board for installation. During pipeline tests, the sensor predicted density within + 2% oriented in vertical and horizontal position. The densimeter is installed in the modified process manifold that is installed in the prefabricated pump pit at Hanford tank SY-101 site. In FY-2002 the density sensor performance will be evaluated during transfers of both water and waste through the pipeline. A separate project developed an ultrasonic sensor that: 1) can be attached permanently to a pipeline wall, possibly as a spool piece inserted into the line or 2) can clamp onto an existing pipeline wall and be movable to another location. This method is attractive for radioactive fluids transport applications because the sensors could be applied to existing equipment without the need to penetrate the pipe pressure boundary or to open the system to install new equipment.

  12. Proof of Concept Experiments of the Multi-Isotope Process Monitor: An Online, Nondestructive, Near Real-Time Monitor for Spent Nuclear Fuel Reprocessing Facilities

    SciTech Connect (OSTI)

    Orton, Christopher R.; Fraga, Carlos G.; Christensen, Richard; Schwantes, Jon M.

    2012-04-21

    Operators, national regulatory agencies and the IAEA will require the development of advanced technologies to efficiently control and safeguard nuclear material at increasingly large-scale nuclear recycling facilities. Ideally, the envisioned technologies would be capable of non-destructive, near-real-time (NRT), autonomous process monitoring. This paper describes results from proof-of-principle experiments designed to test the Multi-Isotope Process (MIP) Monitor, a novel approach to safeguarding reprocessing facilities. The MIP Monitor combines the detection of intrinsic gamma ray signatures emitted from process solutions with multivariate analysis to detect off-normal conditions in process streams nondestructively and in NRT. Commercial spent nuclear fuel of various irradiation histories was dissolved and separated using a PUREX-based batch solvent extraction. Extractions were performed at various nitric acid concentrations to mimic both normal and off-normal industrial plant operating conditions. Principal Component Analysis (PCA) was applied to the simulated gamma spectra to investigate pattern variations as a function of acid concentration, burnup and cooling time. Partial Least Squares (PLS) regression was applied to attempt to quantify both the acid concentration and burnup of the dissolved spent fuel during the initial separation stage of recycle. The MIP Monitor demonstrated sensitivity to induced variations of acid concentration, including the distinction of {+-} 1.3 M variation from normal process conditions by way of PCA. Acid concentration was predicted using measurements from the organic extract and PLS resulting in predictions with <0.7 M relative error. Quantification of burnup levels from dissolved fuel spectra using PLS was demonstrated to be within 2.5% of previously measured values.

  13. Real Property - DOE Directives, Delegations, and Requirements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Real Property

  14. Plug and Process Loads Capacity and Power Requirements Analysis

    SciTech Connect (OSTI)

    Sheppy, M.; Gentile-Polese, L.

    2014-09-01

    This report addresses gaps in actionable knowledge that would help reduce the plug load capacities designed into buildings. Prospective building occupants and real estate brokers lack accurate references for plug and process load (PPL) capacity requirements, so they often request 5-10 W/ft2 in their lease agreements. Limited initial data, however, suggest that actual PPL densities in leased buildings are substantially lower. Overestimating PPL capacity leads designers to oversize electrical infrastructure and cooling systems. Better guidance will enable improved sizing and design of these systems, decrease upfront capital costs, and allow systems to operate more energy efficiently. The main focus of this report is to provide industry with reliable, objective third-party guidance to address the information gap in typical PPL densities for commercial building tenants. This could drive changes in negotiations about PPL energy demands.

  15. Real-time vision systems

    SciTech Connect (OSTI)

    Johnson, R.; Hernandez, J.E.; Lu, Shin-yee

    1994-11-15

    Many industrial and defence applications require an ability to make instantaneous decisions based on sensor input of a time varying process. Such systems are referred to as `real-time systems` because they process and act on data as it occurs in time. When a vision sensor is used in a real-time system, the processing demands can be quite substantial, with typical data rates of 10-20 million samples per second. A real-time Machine Vision Laboratory (MVL) was established in FY94 to extend our years of experience in developing computer vision algorithms to include the development and implementation of real-time vision systems. The laboratory is equipped with a variety of hardware components, including Datacube image acquisition and processing boards, a Sun workstation, and several different types of CCD cameras, including monochrome and color area cameras and analog and digital line-scan cameras. The equipment is reconfigurable for prototyping different applications. This facility has been used to support several programs at LLNL, including O Division`s Peacemaker and Deadeye Projects as well as the CRADA with the U.S. Textile Industry, CAFE (Computer Aided Fabric Inspection). To date, we have successfully demonstrated several real-time applications: bullet tracking, stereo tracking and ranging, and web inspection. This work has been documented in the ongoing development of a real-time software library.

  16. Better Building Alliance, Plug and Process Loads in Commercial Buildings: Capacity and Power Requirement Analysis (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2014-09-01

    This brochure addresses gaps in actionable knowledge that can help reduce the plug load capacities designed into buildings. Prospective building occupants and real estate brokers lack accurate references for plug and process load (PPL) capacity requirements, so they often request 5-10 W/ft2 in their lease agreements. This brochure should be used to make these decisions so systems can operate more energy efficiently; upfront capital costs will also decrease. This information can also be used to drive changes in negotiations about PPL energy demands. It should enable brokers and tenants to agree about lower PPL capacities. Owner-occupied buildings will also benefit. Overestimating PPL capacity leads designers to oversize electrical infrastructure and cooling systems.

  17. Real time automated inspection

    DOE Patents [OSTI]

    Fant, Karl M.; Fundakowski, Richard A.; Levitt, Tod S.; Overland, John E.; Suresh, Bindinganavle R.; Ulrich, Franz W.

    1985-01-01

    A method and apparatus relating to the real time automatic detection and classification of characteristic type surface imperfections occurring on the surfaces of material of interest such as moving hot metal slabs produced by a continuous steel caster. A data camera transversely scans continuous lines of such a surface to sense light intensities of scanned pixels and generates corresponding voltage values. The voltage values are converted to corresponding digital values to form a digital image of the surface which is subsequently processed to form an edge-enhanced image having scan lines characterized by intervals corresponding to the edges of the image. The edge-enhanced image is thresholded to segment out the edges and objects formed by the edges are segmented out by interval matching and bin tracking. Features of the objects are derived and such features are utilized to classify the objects into characteristic type surface imperfections.

  18. Real time automated inspection

    DOE Patents [OSTI]

    Fant, K.M.; Fundakowski, R.A.; Levitt, T.S.; Overland, J.E.; Suresh, B.R.; Ulrich, F.W.

    1985-05-21

    A method and apparatus are described relating to the real time automatic detection and classification of characteristic type surface imperfections occurring on the surfaces of material of interest such as moving hot metal slabs produced by a continuous steel caster. A data camera transversely scans continuous lines of such a surface to sense light intensities of scanned pixels and generates corresponding voltage values. The voltage values are converted to corresponding digital values to form a digital image of the surface which is subsequently processed to form an edge-enhanced image having scan lines characterized by intervals corresponding to the edges of the image. The edge-enhanced image is thresholded to segment out the edges and objects formed by the edges by interval matching and bin tracking. Features of the objects are derived and such features are utilized to classify the objects into characteristic type surface imperfections. 43 figs.

  19. Student's algorithm solves real-world problem

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Student's algorithm solves real-world problem Supercomputing Challenge: student's algorithm solves real-world problem Students learn how to use powerful computers to analyze, model, and solve real-world problems. April 3, 2012 Jordon Medlock of Albuquerque's Manzano High School won the 2012 Lab-sponsored Supercomputing Challenge Jordon Medlock of Albuquerque's Manzano High School won the 2012 Lab-sponsored Supercomputing Challenge by creating a computer algorithm that automates the process of

  20. Badging, Real ID

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Office » Badging, Real ID Badging, Real ID Effective Nov. 3, 2014, the Lab will implement requirements of the REAL ID Act. Contact Badge Office (505) 667-6901 Email Badge requirements US citizen employees must present a photo ID and proof of US citizenship. See Security Smart on Proof of United States Citizenship for the Badge Office (pdf). Foreign national guests and employees must have an approved visit and present a valid passport and documentation of US legal status and work authorizations.

  1. The LAA real-time benchmarks

    SciTech Connect (OSTI)

    Block, R.K.; Krischer, W.; Lone, S.

    1989-04-01

    In the context of the LAA detector development program a subgroup Real Time Data Processing has tackled the problem of intelligent triggering. The main goal of this group is to show how fast digital devices, implemented as custom-made or commercial processors, can execute some basic algorithms, and how they can be embedded in the data flow between detector readout components and fully programmable commercial processors, which are expected to be the final data processing filter in real time.

  2. Real Property Asset Management

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2016-08-19

    The directive establishes an integrated corporate-level, performance based approach to the life-cycle management of our real property assets. It links real property asset planning, programming, budgeting and evaluation to the Department's multi-faceted missions. Successful implementation of this order will enable the Department to carry out stewardship responsibilities, and will ensure that facilities and infrastructure are properly sized and in a condition to meet our mission requirements today and in the future. Supersedes DOE O 430.1B Chg 2.

  3. Real Property Asset Management

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-09-24

    The directive establishes an integrated corporate-level, performance based approach to the life-cycle management of our real property assets. It links real property asset planning, programming, budgeting and evaluation to the Department's multi-faceted missions. Successful implementation of this order will enable the Department to carry out our stewardship responsibilities, and will ensure that our facilities and infrastructure are properly sized and in a condition to meet our mission requirements today and in the future. Chg 1, dated 2-8-08. Chg 2, dated 4-25-11

  4. Real Property Asset Management

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-09-24

    The directive establishes an integrated corporate-level, performance based approach to the life-cycle management of our real property assets. It links real property asset planning, programming, budgeting and evaluation to the Department's multi-faceted missions. Successful implementation of this order will enable the Department to carry out our stewardship responsibilities, and will ensure that our facilities and infrastructure are properly sized and in a condition to meet our mission requirements today and in the future. Cancels: DOE O 430.1A. Chg 1, dated 2-8-08. Chg 2, dated 4-25-11

  5. CASL - Keeping It Real

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Keeping It Real To ensure its modeling and simulation research activities are appropriately focused on specific industry issues, CASL engages an Industry Council chaired by the Electric Power Research Institute. CASL is committed to engaging the nuclear power industry to ensure its research is "used and useful" and positively contributes to the ability to generate safe, reliable, economical, and carbon-free electricity from nuclear power. In his visit to the CASL facilities at Oak

  6. Real time analysis under EDS

    SciTech Connect (OSTI)

    Schneberk, D.

    1985-07-01

    This paper describes the analysis component of the Enrichment Diagnostic System (EDS) developed for the Atomic Vapor Laser Isotope Separation Program (AVLIS) at Lawrence Livermore National Laboratory (LLNL). Four different types of analysis are performed on data acquired through EDS: (1) absorption spectroscopy on laser-generated spectral lines, (2) mass spectrometer analysis, (3) general purpose waveform analysis, and (4) separation performance calculations. The information produced from this data includes: measures of particle density and velocity, partial pressures of residual gases, and overall measures of isotope enrichment. The analysis component supports a variety of real-time modeling tasks, a means for broadcasting data to other nodes, and a great degree of flexibility for tailoring computations to the exact needs of the process. A particular data base structure and program flow is common to all types of analysis. Key elements of the analysis component are: (1) a fast access data base which can configure all types of analysis, (2) a selected set of analysis routines, (3) a general purpose data manipulation and graphics package for the results of real time analysis. Each of these components are described with an emphasis upon how each contributes to overall system capability. 3 figs.

  7. Real time Faraday spectrometer

    DOE Patents [OSTI]

    Smith, Jr., Tommy E. (Fremont, CA); Struve, Kenneth W. (Albuquerque, NM); Colella, Nicholas J. (Livermore, CA)

    1991-01-01

    This invention uses a dipole magnet to bend the path of a charged particle beam. As the deflected particles exit the magnet, they are spatially dispersed in the bend-plane of the magnet according to their respective momenta and pass to a plurality of chambers having Faraday probes positioned therein. Both the current and energy distribution of the particles is then determined by the non-intersecting Faraday probes located along the chambers. The Faraday probes are magnetically isolated from each other by thin metal walls of the chambers, effectively providing real time current-versus-energy particle measurements.

  8. DOE Awards $15 Million in Technical Assistance to Support Major Retailers, Financial Institutions and Real Estate Firms to Adopt Energy-Efficient Technologies

    Broader source: Energy.gov [DOE]

    Awards Encourage Adoption of Energy-Saving Technologies for New Construction and Retrofits in Commercial Buildings

  9. Building America Top Innovations 2014 Profile: Valuing Green in the Appraisal Process

    SciTech Connect (OSTI)

    none,

    2014-11-01

    This 2014 Top Innovation profile describes how Building America’s BARA team facilitated discussions between the Appraisal Institute and RESNET, paving the way for a groundbreaking agreement between the two organizations. This agreement allows RESNET-approved Home Energy Rating System (HERS) software to auto-generate a fact-filled Green and Energy Efficiency Addendum intended for real estate appraisers for every home rated by a RESNET-certified HERS rater.

  10. Review of mineral estate of the United States at Naval Petroleum Reserve No. 2, Buena Vista Hills Field, Kern County, California

    SciTech Connect (OSTI)

    1996-08-09

    The purpose of this report is to present this Consultant`s findings regarding the nature and extent of the mineral estate of the United States at National Petroleum Reserve No. 2 (NPR-2), Buena Vista Hills Field, Kern County, California. Determination of the mineral estate is a necessary prerequisite to this Consultant`s calculation of estimated future cash flows attributable to said estate, which calculations are presented in the accompanying report entitled ``Phase II Final Report, Study of Alternatives for Future Operations of the Naval Petroleum and Oil Shale Reserves, NPR-2, California.`` This Report contains a discussion of the leases in effect at NPR-2 and subsequent contracts affecting such leases. This Report also summarizes discrepancies found between the current royalty calculation procedures utilized at NPR-2 and those procedures required under applicable agreements and regulations. Recommendations for maximizing the government`s income stream at NPR-2 are discussed in the concluding section of this Report.

  11. Real-Time Benchmark Suite

    Energy Science and Technology Software Center (OSTI)

    1992-01-17

    This software provides a portable benchmark suite for real time kernels. It tests the performance of many of the system calls, as well as the interrupt response time and task response time to interrupts. These numbers provide a baseline for comparing various real-time kernels and hardware platforms.

  12. Towards real time diagnostics of Hybrid Welding Laser/GMAW

    SciTech Connect (OSTI)

    McJunkin, T. R.; Kunerth, D. C.; Nichol, C. I. [Idaho National Laboratory, Idaho Falls, ID 83415-3570 (United States); Todorov, E.; Levesque, S. [Edison Welding Institute, Columbus, OH (United States)

    2014-02-18

    Methods are currently being developed towards a more robust system real time feedback in the high throughput process combining laser welding with gas metal arc welding. A combination of ultrasonic, eddy current, electronic monitoring, and visual techniques are being applied to the welding process. Initial simulation and bench top evaluation of proposed real time techniques on weld samples are presented along with the concepts to apply the techniques concurrently to the weld process. Consideration for the eventual code acceptance of the methods and system are also being researched as a component of this project. The goal is to detect defects or precursors to defects and correct when possible during the weld process.

  13. Towards Real Time Diagnostics of Hybrid Welding Laser/GMAW

    SciTech Connect (OSTI)

    Timothy Mcjunkin; Dennis C. Kunerth; Corrie Nichol; Evgueni Todorov; Steve Levesque; Feng Yu; Robert Danna Couch

    2013-07-01

    Methods are currently being developed towards a more robust system real time feedback in the high throughput process combining laser welding with gas metal arc welding. A combination of ultrasonic, eddy current, electronic monitoring, and visual techniques are being applied to the welding process. Initial simulation and bench top evaluation of proposed real time techniques on weld samples are presented along with the concepts to apply the techniques concurrently to the weld process. Consideration for the eventual code acceptance of the methods and system are also being researched as a component of this project. The goal is to detect defects or precursors to defects and correct when possible during the weld process.

  14. Real time gamma-ray signature identifier

    DOE Patents [OSTI]

    Rowland, Mark; Gosnell, Tom B.; Ham, Cheryl; Perkins, Dwight; Wong, James

    2012-05-15

    A real time gamma-ray signature/source identification method and system using principal components analysis (PCA) for transforming and substantially reducing one or more comprehensive spectral libraries of nuclear materials types and configurations into a corresponding concise representation/signature(s) representing and indexing each individual predetermined spectrum in principal component (PC) space, wherein an unknown gamma-ray signature may be compared against the representative signature to find a match or at least characterize the unknown signature from among all the entries in the library with a single regression or simple projection into the PC space, so as to substantially reduce processing time and computing resources and enable real-time characterization and/or identification.

  15. Organizing the Extremely Large LSST Database forReal-Time Astronomical...

    Office of Scientific and Technical Information (OSTI)

    Organizing the Extremely Large LSST Database forReal-Time Astronomical Processing Citation Details In-Document Search Title: Organizing the Extremely Large LSST Database ...

  16. Modeling fast electron dynamics with real-time time-dependent...

    Office of Scientific and Technical Information (OSTI)

    Lett. 2005, 94, 043002, demonstrating the utility of a real-time approach in capturing charge transfer processes. Authors: Lopata, Kenneth A. ; Govind, Niranjan Publication Date: ...

  17. Search Method for Real-time Knowledge Discovery Modeled on the...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Search Method for Real-time Knowledge Discovery Modeled on the Human Brain Oak Ridge ... information processing properties of the human brain to computational knowledge discovery. ...

  18. Tracking Living Cells as They Differentiate in Real Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tracking Living Cells as They Differentiate in Real Time Tracking Living Cells as They Differentiate in Real Time Print Thursday, 27 September 2012 00:00 Protein phosphorylation regulates protein function in a cell, either activating or inactivating the proteins responsible for many cell functions ranging from cell proliferation to differentiation to metabolism to signaling, and even programmed cell death. This chemical process has been studied intensively, but until now it has been impossible

  19. Real Goods Solar Campbell | Open Energy Information

    Open Energy Info (EERE)

    Goods Solar Campbell Jump to: navigation, search Logo: Real Goods Solar Campbell Name: Real Goods Solar Campbell Address: 1624 Dell Avenue Place: Campbell, California Zip: 95008...

  20. Real Goods Solar Ukiah | Open Energy Information

    Open Energy Info (EERE)

    navigation, search Logo: Real Goods Solar Ukiah Name: Real Goods Solar Ukiah Address: 301 L Kunzler Ranch Rd Place: Ukiah, California Zip: 95482 Sector: Solar Year Founded: 1978...

  1. Parallel architecture for real-time simulation. Master's thesis

    SciTech Connect (OSTI)

    Cockrell, C.D.

    1989-01-01

    This thesis is concerned with the development of a very fast and highly efficient parallel computer architecture for real-time simulation of continuous systems. Currently, several parallel processing systems exist that may be capable of executing a complex simulation in real-time. These systems are examined and the pros and cons of each system discussed. The thesis then introduced a custom-designed parallel architecture based upon The University of Alabama's OPERA architecture. Each component of this system is discussed and rationale presented for its selection. The problem selected, real-time simulation of the Space Shuttle Main Engine for the test and evaluation of the proposed architecture, is explored, identifying the areas where parallelism can be exploited and parallel processing applied. Results from the test and evaluation phase are presented and compared with the results of the same problem that has been processed on a uniprocessor system.

  2. Real Property and Asset Management

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-09-24

    The directive establishes an integrated corporate-level, performance based approach to the life-cycle management of our real property assets. It links real property asset planning, programming, budgeting and evaluation to the Department's multi-faceted missions. Successful implementation of this order will enable the Department to carry out stewardship responsibilities, and will ensure that facilities and infrastructure are properly sized and in a condition to meet our mission requirements today and in the future. Supersedes DOE O 430.1A Chg 1.

  3. Real Property and Asset Management

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-09-24

    The directive establishes an integrated corporate-level, performance based approach to the life-cycle management of our real property assets. It links real property asset planning, programming, budgeting and evaluation to the Department's multi-faceted missions. Successful implementation of this order will enable the Department to carry out stewardship responsibilities, and will ensure that facilities and infrastructure are properly sized and in a condition to meet our mission requirements today and in the future. Cancels DOE O 430.1A Chg 1.

  4. MESA Makes It Real The

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    & Engineering Sciences Applications (MESA) MESA Makes It Real The Microsystems & Engineering Sciences Applications (MESA) Complex represents the essential facilities and equipment to design, develop, manufacture, integrate, and qualify microsystems for national security needs that cannot or should not be made in industry- either because the low volumes required for these applications are not profitable for the private sector, or because of stringent security requirements for

  5. Radiation Levels in Real Time?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Levels in Real Time? There's an App for That! Gamma radiation levels in the southern Nevada area will soon be accessible around the world at the touch of a finger. Makers of the cell phone application EcoData: Radiation are expanding their global network of radiation monitoring stations to include up-to-date readings from the Community Environmental Monitoring Program (CEMP) based out of southern Nevada. The CEMP was established in 1981 to monitor manmade and natural radiation levels surrounding

  6. Real Time Simulation of Power Grid Disruptions

    SciTech Connect (OSTI)

    Chinthavali, Supriya; Dimitrovski, Aleksandar D; Fernandez, Steven J; Groer, Christopher S; Nutaro, James J; Olama, Mohammed M; Omitaomu, Olufemi A; Shankar, Mallikarjun; Spafford, Kyle L; Vacaliuc, Bogdan

    2012-11-01

    DOE-OE and DOE-SC workshops (Reference 1-3) identified the key power grid problem that requires insight addressable by the next generation of exascale computing is coupling of real-time data streams (1-2 TB per hour) as the streams are ingested to dynamic models. These models would then identify predicted disruptions in time (2-4 seconds) to trigger the smart grid s self healing functions. This project attempted to establish the feasibility of this approach and defined the scientific issues, and demonstrated example solutions to important smart grid simulation problems. These objectives were accomplished by 1) using the existing frequency recorders on the national grid to establish a representative and scalable real-time data stream; 2) invoking ORNL signature identification algorithms; 3) modeling dynamically a representative region of the Eastern interconnect using an institutional cluster, measuring the scalability and computational benchmarks for a national capability; and 4) constructing a prototype simulation for the system s concept of smart grid deployment. The delivered ORNL enduring capability included: 1) data processing and simulation metrics to design a national capability justifying exascale applications; 2) Software and intellectual property built around the example solutions; 3) demonstrated dynamic models to design few second self-healing.

  7. Real Goods Solar Denver | Open Energy Information

    Open Energy Info (EERE)

    Real Goods Solar Denver Name: Real Goods Solar Denver Address: 7003 E. 47th Ave Dr, Unit 700 Place: Denver, Colorado Zip: 80218 Sector: Solar Year Founded: 1978 Phone Number:...

  8. Real time infrared aerosol analyzer

    DOE Patents [OSTI]

    Johnson, Stanley A.; Reedy, Gerald T.; Kumar, Romesh

    1990-01-01

    Apparatus for analyzing aerosols in essentially real time includes a virtual impactor which separates coarse particles from fine and ultrafine particles in an aerosol sample. The coarse and ultrafine particles are captured in PTFE filters, and the fine particles impact onto an internal light reflection element. The composition and quantity of the particles on the PTFE filter and on the internal reflection element are measured by alternately passing infrared light through the filter and the internal light reflection element, and analyzing the light through infrared spectrophotometry to identify the particles in the sample.

  9. Looking at Transistor Gate Oxide Formation in Real Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Looking at Transistor Gate Oxide Formation in Real Time Looking at Transistor Gate Oxide Formation in Real Time Print Wednesday, 25 June 2008 00:00 The oxide gate layer is critical to every transistor, and present-day layer thicknesses are in the 10-20 Å range (1-2 nm). However, little information exists on the oxidation process at this thickness. Available results are either for thicker layers grown under high-pressure conditions or for only the first couple of monolayers studied under

  10. Real Time Pricing and the Real Live Firm

    SciTech Connect (OSTI)

    Moezzi, Mithra; Goldman, Charles; Sezgen, Osman; Bharvirkar, Ranjit; Hopper, Nicole

    2004-05-26

    Energy economists have long argued the benefits of real time pricing (RTP) of electricity. Their basis for modeling customers response to short-term fluctuations in electricity prices are based on theories of rational firm behavior, where management strives to minimize operating costs and optimize profit, and labor, capital and energy are potential substitutes in the firm's production function. How well do private firms and public sector institutions operating conditions, knowledge structures, decision-making practices, and external relationships comport with these assumptions and how might this impact price response? We discuss these issues on the basis of interviews with 29 large (over 2 MW) industrial, commercial, and institutional customers in the Niagara Mohawk Power Corporation service territory that have faced day-ahead electricity market prices since 1998. We look at stories interviewees told about why and how they respond to RTP, why some customers report that they can't, and why even if they can, they don't. Some firms respond as theorized, and we describe their load curtailment strategies. About half of our interviewees reported that they were unable to either shift or forego electricity consumption even when prices are high ($0.50/kWh). Reasons customers gave for why they weren't price-responsive include implicit value placed on reliability, pricing structures, lack of flexibility in adjusting production inputs, just-in-time practices, perceived barriers to onsite generation, and insufficient time. We draw these observations into a framework that could help refine economic theory of dynamic pricing by providing real-world descriptions of how firms behave and why.

  11. Real time capable infrared thermography for ASDEX Upgrade

    SciTech Connect (OSTI)

    Sieglin, B. Faitsch, M.; Herrmann, A.; Brucker, B.; Eich, T.; Kammerloher, L.; Martinov, S.

    2015-11-15

    Infrared (IR) thermography is widely used in fusion research to study power exhaust and incident heat load onto the plasma facing components. Due to the short pulse duration of today’s fusion experiments, IR systems have mostly been designed for off-line data analysis. For future long pulse devices (e.g., Wendelstein 7-X, ITER), a real time evaluation of the target temperature and heat flux is mandatory. This paper shows the development of a real time capable IR system for ASDEX Upgrade. A compact IR camera has been designed incorporating the necessary magnetic and electric shielding for the detector, cooler assembly. The camera communication is based on the Camera Link industry standard. The data acquisition hardware is based on National Instruments hardware, consisting of a PXIe chassis inside and a fibre optical connected industry computer outside the torus hall. Image processing and data evaluation are performed using real time LabVIEW.

  12. Real-Time Dynamics Monitoring System with Synchronized Phasor Measurements

    Energy Science and Technology Software Center (OSTI)

    2005-01-01

    The Real-Time Dynamics Monitoring System is designed to monitor the dynamics within the power grid and assess the system behavior during normal and disturbance conditions. The RTDMS application was built on the Grid-3P technology platform and takes real-time information collected by Synchronized Phasor Measurement Units (PMU5) or other collection devices and transmitted to a central Phasor Data Concentrator (PDC) for monitoring grid dynamics. The data is sampled 30 times per second and is time-synchronized. Thismore » data is processed to create graphical and geographical displays to provide visualization for frequency/frequency response, voltage magnitudes and angles, voltage angle differences across critical paths as well as real and reactive power-flows on a sub-second and second basis. Software allows for monitoring, tracking, historical data archiving and electric system troubleshooting for reliability management.« less

  13. Toward Real Time Data Analysis for Smart Grids

    SciTech Connect (OSTI)

    Yin, Jian; Gorton, Ian; Sharma, Poorva

    2012-11-10

    This paper describes the architecture and design of a novel system for supporting large-scale real-time data analysis for future power grid systems. The widespread deployment of renewable generation, smart grid controls, energy storage, plug-in hybrids, and new conducting materials will require fundamental changes in the operational concepts and principal components of the grid. As a result, the whole system becomes highly dynamic and requires constant adjusting based on real time data. Even though millions of sensors such as phase measurement units (PMU) and smart meters are being widely deployed, a data layer that can analyze this amount of data in real time is needed. Unlike the data fabric in other cloud services, the data layer for smart grids has some unique design requirements. First, this layer must provide real time guarantees. Second, this layer must be scalable to allow a large number of applications to access the data from millions of sensors in real time. Third, reliability is critical and this layer must be able to continue to provide service in face of failures. Fourth, this layer must be secure. We address these challenges though a scalable system architecture that integrates the I/O and data processing capability in a devise set of devices. Data process operations can be placed anywhere from sensors, data storage devices, to control centers. We further employ compression to improve performance. We design a lightweight compression customized for power grid data. Our system can reduce end-to-end response time by reduce I/O overhead through compression and overlap compression operations with I/O. The initial prototype of our system was demonstrated with several use cases from PNNL’s FPGI and show that our system can provide real time guarantees to a diverse set of applications.

  14. In-Situ, Real Time Measurement of Elemental Constituents | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    In-Situ, Real Time Measurement of Elemental Constituents In-Situ, Real Time Measurement of Elemental Constituents New Laser System Provides Real-Time Measurements for Improved ...

  15. 2015 Federal Real Property Council Reporting Guidance | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2015 Federal Real Property Council Reporting Guidance 2015 Federal Real Property Council Reporting Guidance Real Property Reporting: EO 13327 requires agencies to report annually ...

  16. OPAM Policy Acquisition Guides | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    22.02 KB) More Documents & Publications Acquisition, Use, and Disposal of Real Estate Chapter 17 - Special Contracting Methods Acquisition, Use, and Disposal of Real Estate

  17. Real Property Asset Management | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services » Site & Facility Restoration » Facility Engineering » Real Property Asset Management Real Property Asset Management The Real Property Asset Management (RPAM) portion of Deactivation & Decommissioning/Facility Engineering (D&D/FE) presents a driving programmatic challenge within the EM-D&D Clean-up program effort which currently involves 114 sites with 4,900 buildings and other structures which currently account for 28 percent of the Department's assets. The overall

  18. Real Goods Solar Fullerton | Open Energy Information

    Open Energy Info (EERE)

    Goods Solar Fullerton Name: Real Goods Solar Fullerton Address: 2466 E Fender Ave Unit F Place: Fullerton, California Zip: 92831 Sector: Solar Year Founded: 1989 Phone Number:...

  19. Tracking Living Cells as They Differentiate in Real Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tracking Living Cells as They Differentiate in Real Time Print Protein phosphorylation regulates protein function in a cell, either activating or inactivating the proteins responsible for many cell functions ranging from cell proliferation to differentiation to metabolism to signaling, and even programmed cell death. This chemical process has been studied intensively, but until now it has been impossible to watch phosphorylation at the molecular level without damaging cells or interfering with

  20. Tracking Living Cells as They Differentiate in Real Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tracking Living Cells as They Differentiate in Real Time Print Protein phosphorylation regulates protein function in a cell, either activating or inactivating the proteins responsible for many cell functions ranging from cell proliferation to differentiation to metabolism to signaling, and even programmed cell death. This chemical process has been studied intensively, but until now it has been impossible to watch phosphorylation at the molecular level without damaging cells or interfering with

  1. Tracking Living Cells as They Differentiate in Real Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tracking Living Cells as They Differentiate in Real Time Print Protein phosphorylation regulates protein function in a cell, either activating or inactivating the proteins responsible for many cell functions ranging from cell proliferation to differentiation to metabolism to signaling, and even programmed cell death. This chemical process has been studied intensively, but until now it has been impossible to watch phosphorylation at the molecular level without damaging cells or interfering with

  2. Tracking Living Cells as They Differentiate in Real Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tracking Living Cells as They Differentiate in Real Time Print Protein phosphorylation regulates protein function in a cell, either activating or inactivating the proteins responsible for many cell functions ranging from cell proliferation to differentiation to metabolism to signaling, and even programmed cell death. This chemical process has been studied intensively, but until now it has been impossible to watch phosphorylation at the molecular level without damaging cells or interfering with

  3. Tracking Living Cells as They Differentiate in Real Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tracking Living Cells as They Differentiate in Real Time Print Protein phosphorylation regulates protein function in a cell, either activating or inactivating the proteins responsible for many cell functions ranging from cell proliferation to differentiation to metabolism to signaling, and even programmed cell death. This chemical process has been studied intensively, but until now it has been impossible to watch phosphorylation at the molecular level without damaging cells or interfering with

  4. Measuring Real-time Biological and Abiotic Manganese Oxide Reduction |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Stanford Synchrotron Radiation Lightsource Measuring Real-time Biological and Abiotic Manganese Oxide Reduction Tuesday, May 31, 2016 Manganese(IV) oxides are powerful scavengers of toxins and trace metals, but they are also strong oxidants in the environment (1). Certain common microbes can also 'breathe' manganese oxides, in a process known as anaerobic respiration (2). During these environmental -commonly with sulfur or iron species- and biological interactions, manganese oxides are often

  5. Optimizing near real time accountability for reprocessing.

    SciTech Connect (OSTI)

    Cipiti, Benjamin B.

    2010-06-01

    Near Real Time Accountability (NRTA) of actinides at high precision in reprocessing plants has been a long sought-after goal in the safeguards community. Achieving this goal is hampered by the difficulty of making precision measurements in the reprocessing environment, equipment cost, and impact to plant operations. Thus the design of future reprocessing plants requires an optimization of different approaches. The Separations and Safeguards Performance Model, developed at Sandia National Laboratories, was used to evaluate a number of NRTA strategies in a UREX+ reprocessing plant. Strategies examined include the incorporation of additional actinide measurements of internal plant vessels, more use of process monitoring data, and the option of periodic draining of inventory to key tanks. Preliminary results show that the addition of measurement technologies can increase the overall measurement uncertainty due to additional error propagation, so care must be taken when designing an advanced system. Initial results also show that relying on a combination of different NRTA techniques will likely be the best option. The model provides a platform for integrating all the data. The modeling results for the different NRTA options under various material loss conditions will be presented.

  6. Real Performance for Real Buildings - 2014 BTO Peer Review | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Real Performance for Real Buildings - 2014 BTO Peer Review Real Performance for Real Buildings - 2014 BTO Peer Review Presenter: Shanti Pless, National Renewable Energy Laboratory This project aims to develop deployable resources to assist building decision makers in understanding and replicating the benefits of using measureable energy performance targets to better connect design and operations. By using energy modeling to produce whole-building energy impact ranges, this project

  7. Senior Real Property Officer (SRPO) Responsibilities About Senior Real Property Officers (SRPO)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Senior Real Property Officer (SRPO) Responsibilities About Senior Real Property Officers (SRPO) The SRPO is a senior-level manager who develops and implements agency asset management plans. The SRPO is responsible for ensuring that the asset management plan meets the following requirements: Identify and categorize real property owned, leased, or managed by the SRPO's agency Identify and pursue goals with appropriate deadlines for real property and measure agency progress Prioritize actions to be

  8. Real time PV manufacturing diagnostic system

    SciTech Connect (OSTI)

    Kochergin, Vladimir; Crawford, Michael A.

    2015-09-01

    The main obstacle Photovoltaic (PV) industry is facing at present is the higher cost of PV energy compared to that of fossil energy. While solar cell efficiencies continue to make incremental gains these improvements are so far insufficient to drive PV costs down to match that of fossil energy. Improved in-line diagnostics however, has the potential to significantly increase the productivity and reduce cost by improving the yield of the process. On this Phase I/Phase II SBIR project MicroXact developed and demonstrated at CIGS pilot manufacturing line a high-throughput in-line PV manufacturing diagnostic system, which was verified to provide fast and accurate data on the spatial uniformity of thickness, an composition of the thin films comprising the solar cell as the solar cell is processed reel-to-reel. In Phase II project MicroXact developed a stand-alone system prototype and demonstrated the following technical characteristics: 1) ability of real time defect/composition inconsistency detection over 60cm wide web at web speeds up to 3m/minute; 2) Better than 1mm spatial resolution on 60cm wide web; 3) an average better than 20nm spectral resolution resulting in more than sufficient sensitivity to composition imperfections (copper-rich and copper-poor regions were detected). The system was verified to be high vacuum compatible. Phase II results completely validated both technical and economic feasibility of the proposed concept. MicroXact’s solution is an enabling technique for in-line PV manufacturing diagnostics to increase the productivity of PV manufacturing lines and reduce the cost of solar energy, thus reducing the US dependency on foreign oil while simultaneously reducing emission of greenhouse gasses.

  9. Real-time multiplicity counter

    DOE Patents [OSTI]

    Rowland, Mark S.; Alvarez, Raymond A.

    2010-07-13

    A neutron multi-detector array feeds pulses in parallel to individual inputs that are tied to individual bits in a digital word. Data is collected by loading a word at the individual bit level in parallel. The word is read at regular intervals, all bits simultaneously, to minimize latency. The electronics then pass the word to a number of storage locations for subsequent processing, thereby removing the front-end problem of pulse pileup.

  10. Real time sensor for therapeutic radiation delivery

    DOE Patents [OSTI]

    Bliss, Mary; Craig, Richard A.; Reeder, Paul L.

    1998-01-01

    The invention is a real time sensor for therapeutic radiation. A probe is placed in or near the patient that senses in real time the dose at the location of the probe. The strength of the dose is determined by either an insertion or an exit probe. The location is determined by a series of vertical and horizontal sensing elements that gives the operator a real time read out dose location relative to placement of the patient. The increased accuracy prevents serious tissue damage to the patient by preventing overdose or delivery of a dose to a wrong location within the body.

  11. Real time sensor for therapeutic radiation delivery

    DOE Patents [OSTI]

    Bliss, M.; Craig, R.A.; Reeder, P.L.

    1998-01-06

    The invention is a real time sensor for therapeutic radiation. A probe is placed in or near the patient that senses in real time the dose at the location of the probe. The strength of the dose is determined by either an insertion or an exit probe. The location is determined by a series of vertical and horizontal sensing elements that gives the operator a real time read out dose location relative to placement of the patient. The increased accuracy prevents serious tissue damage to the patient by preventing overdose or delivery of a dose to a wrong location within the body. 14 figs.

  12. Utility experience with real time rates

    SciTech Connect (OSTI)

    Tabors, R.D.; Schweppe, F.C.; Caramanis, M.C.

    1989-05-01

    The structure of electric utility is undergoing dramatic changes as new and expanded service options are added. The concepts of unbundling or of priority service are expanding the options open to customers. Spot pricing, or real time pricing of electricity provides the economic structure for many of these new service options. It is frequently stated that customers can not adapt to real time prices. This paper identifies the dimensions of real time rates and identifies existing rate structures in the United States and other OECD countries which incorporate these dimensions.

  13. An integrated, subsurface characterization system for real-time, in-situ field analysis

    SciTech Connect (OSTI)

    Baumgart, C.W.; Creager, J.; Mathes, J.; Pounds, T.; VanDeusen, A.; Warthen, B.

    1996-02-01

    This paper describes current efforts at AlliedSignal Federal Manufacturing and Technologies (FM and T) to develop and field an in-situ, data analysis platform to acquire, process, and display site survey data in near real-time. In past years, FM and T has performed a number of site survey tasks. Each of these surveys was unique in application as well as in the type of data processing and analysis that was required to extract and visualize useful site characterization information. However, common to each of these surveys were the following specific computational and operational requirements: (1) a capability to acquire, process, and visualize the site survey data in the field; (2) a capability to perform all processing in a timely fashion (ideally real-time); and (3) a technique for correlating (or fusing) data streams from multiple sensors. Two more general, but no less important, requirements include system architecture modularity and positioning capability. Potential applications include: survey, evaluation, and remediation of numerous Department of Defense and Department of Energy waste sites; real-time detection and characterization of unexploded ordnance and landmines; survey, evaluation, and remediation of industrial waste sites; location of underground utility lines; and providing law enforcement agencies with real-time surveys of crime scenes. The paper describes an integrated data acquisition, processing, and visualization platform that is capable of performing in-situ data processing, interpretation, and visualization in real-time.

  14. NSTX-U Advances in Real-Time C++11 on Linux

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Erickson, Keith G.

    2015-08-14

    Programming languages like C and Ada combined with proprietary embedded operating systems have dominated the real-time application space for decades. The new C++11standard includes native, language-level support for concurrency, a required feature for any nontrivial event-oriented real-time software. Threads, Locks, and Atomics now exist to provide the necessary tools to build the structures that make up the foundation of a complex real-time system. The National Spherical Torus Experiment Upgrade (NSTX-U) at the Princeton Plasma Physics Laboratory (PPPL) is breaking new ground with the language as applied to the needs of fusion devices. A new Digital Coil Protection System (DCPS) willmore »serve as the main protection mechanism for the magnetic coils, and it is written entirely in C++11 running on Concurrent Computer Corporation's real-time operating system, RedHawk Linux. It runs over 600 algorithms in a 5 kHz control loop that determine whether or not to shut down operations before physical damage occurs. To accomplish this, NSTX-U engineers developed software tools that do not currently exist elsewhere, including real-time atomic synchronization, real-time containers, and a real-time logging framework. Together with a recent (and carefully configured) version of the GCC compiler, these tools enable data acquisition, processing, and output using a conventional operating system to meet a hard real-time deadline (that is, missing one periodic is a failure) of 200 microseconds.« less

  15. NSTX-U Advances in Real-Time C++11 on Linux

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Erickson, Keith G.

    2015-08-14

    Programming languages like C and Ada combined with proprietary embedded operating systems have dominated the real-time application space for decades. The new C++11standard includes native, language-level support for concurrency, a required feature for any nontrivial event-oriented real-time software. Threads, Locks, and Atomics now exist to provide the necessary tools to build the structures that make up the foundation of a complex real-time system. The National Spherical Torus Experiment Upgrade (NSTX-U) at the Princeton Plasma Physics Laboratory (PPPL) is breaking new ground with the language as applied to the needs of fusion devices. A new Digital Coil Protection System (DCPS) willmore » serve as the main protection mechanism for the magnetic coils, and it is written entirely in C++11 running on Concurrent Computer Corporation's real-time operating system, RedHawk Linux. It runs over 600 algorithms in a 5 kHz control loop that determine whether or not to shut down operations before physical damage occurs. To accomplish this, NSTX-U engineers developed software tools that do not currently exist elsewhere, including real-time atomic synchronization, real-time containers, and a real-time logging framework. Together with a recent (and carefully configured) version of the GCC compiler, these tools enable data acquisition, processing, and output using a conventional operating system to meet a hard real-time deadline (that is, missing one periodic is a failure) of 200 microseconds.« less

  16. NSTX-U Advances in Real-Time C++11 on Linux

    SciTech Connect (OSTI)

    Erickson, Keith G.

    2015-08-14

    Programming languages like C and Ada combined with proprietary embedded operating systems have dominated the real-time application space for decades. The new C++11standard includes native, language-level support for concurrency, a required feature for any nontrivial event-oriented real-time software. Threads, Locks, and Atomics now exist to provide the necessary tools to build the structures that make up the foundation of a complex real-time system. The National Spherical Torus Experiment Upgrade (NSTX-U) at the Princeton Plasma Physics Laboratory (PPPL) is breaking new ground with the language as applied to the needs of fusion devices. A new Digital Coil Protection System (DCPS) will serve as the main protection mechanism for the magnetic coils, and it is written entirely in C++11 running on Concurrent Computer Corporation's real-time operating system, RedHawk Linux. It runs over 600 algorithms in a 5 kHz control loop that determine whether or not to shut down operations before physical damage occurs. To accomplish this, NSTX-U engineers developed software tools that do not currently exist elsewhere, including real-time atomic synchronization, real-time containers, and a real-time logging framework. Together with a recent (and carefully configured) version of the GCC compiler, these tools enable data acquisition, processing, and output using a conventional operating system to meet a hard real-time deadline (that is, missing one periodic is a failure) of 200 microseconds.

  17. New Algorithm Enables Faster Simulations of Ultrafast Processes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Algorithm Enables Faster Simulations of Ultrafast Processes New Algorithm Enables Faster ... Academy of Sciences, have developed a new real-time time-dependent density function ...

  18. REAL TIME SYSTEM OPERATIONS 2006-2007

    SciTech Connect (OSTI)

    Eto, Joseph H.; Parashar, Manu; Lewis, Nancy Jo

    2008-08-15

    The Real Time System Operations (RTSO) 2006-2007 project focused on two parallel technical tasks: (1) Real-Time Applications of Phasors for Monitoring, Alarming and Control; and (2) Real-Time Voltage Security Assessment (RTVSA) Prototype Tool. The overall goal of the phasor applications project was to accelerate adoption and foster greater use of new, more accurate, time-synchronized phasor measurements by conducting research and prototyping applications on California ISO's phasor platform - Real-Time Dynamics Monitoring System (RTDMS) -- that provide previously unavailable information on the dynamic stability of the grid. Feasibility assessment studies were conducted on potential application of this technology for small-signal stability monitoring, validating/improving existing stability nomograms, conducting frequency response analysis, and obtaining real-time sensitivity information on key metrics to assess grid stress. Based on study findings, prototype applications for real-time visualization and alarming, small-signal stability monitoring, measurement based sensitivity analysis and frequency response assessment were developed, factory- and field-tested at the California ISO and at BPA. The goal of the RTVSA project was to provide California ISO with a prototype voltage security assessment tool that runs in real time within California ISO?s new reliability and congestion management system. CERTS conducted a technical assessment of appropriate algorithms, developed a prototype incorporating state-of-art algorithms (such as the continuation power flow, direct method, boundary orbiting method, and hyperplanes) into a framework most suitable for an operations environment. Based on study findings, a functional specification was prepared, which the California ISO has since used to procure a production-quality tool that is now a part of a suite of advanced computational tools that is used by California ISO for reliability and congestion management.

  19. Solar Real-Time Pricing: Is Real-Time Electricity Pricing Beneficial...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    & Market Analysis Codes, Standards & Utility Policies Subprogram Soft Costs Author Bright Power, Inc. for New York City Economic Development Corporation Solar Real-Time ...

  20. Real time 3D and heterogeneous data fusion

    SciTech Connect (OSTI)

    Little, C.Q.; Small, D.E.

    1998-03-01

    This project visualizes characterization data in a 3D setting, in real time. Real time in this sense means collecting the data and presenting it before it delays the user, and processing faster than the acquisition systems so no bottlenecks occur. The goals have been to build a volumetric viewer to display 3D data, demonstrate projecting other data, such as images, onto the 3D data, and display both the 3D and projected images as fast as the data became available. The authors have examined several ways to display 3D surface data. The most effective was generating polygonal surface meshes. They have created surface maps form a continuous stream of 3D range data, fused image data onto the geometry, and displayed the data with a standard 3D rendering package. In parallel with this, they have developed a method to project real-time images onto the surface created. A key component is mapping the data on the correct surfaces, which requires a-priori positional information along with accurate calibration of the camera and lens system.

  1. 2015 Federal Real Property Council Reporting Guidance | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy 5 Federal Real Property Council Reporting Guidance 2015 Federal Real Property Council Reporting Guidance Real Property Reporting: EO 13327 requires agencies to report annually all owned, leased, and otherwise managed. Federal real property assets within and outside the United States, including improvements on Federal land. 2015_Guidance_for_Real_Property_Inventory_Reporting__April_2015.pdf (2.53 MB) More Documents & Publications 2012 Federal Real Property Council Reporting

  2. Looking at Transistor Gate Oxide Formation in Real Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Looking at Transistor Gate Oxide Formation in Real Time Print The oxide gate layer is critical to every transistor, and present-day layer thicknesses are in the 10-20 Å range (1-2 nm). However, little information exists on the oxidation process at this thickness. Available results are either for thicker layers grown under high-pressure conditions or for only the first couple of monolayers studied under high-vacuum conditions. Now, for the first time, a group of researchers has obtained

  3. Looking at Transistor Gate Oxide Formation in Real Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Looking at Transistor Gate Oxide Formation in Real Time Print The oxide gate layer is critical to every transistor, and present-day layer thicknesses are in the 10-20 Å range (1-2 nm). However, little information exists on the oxidation process at this thickness. Available results are either for thicker layers grown under high-pressure conditions or for only the first couple of monolayers studied under high-vacuum conditions. Now, for the first time, a group of researchers has obtained

  4. Looking at Transistor Gate Oxide Formation in Real Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Looking at Transistor Gate Oxide Formation in Real Time Print The oxide gate layer is critical to every transistor, and present-day layer thicknesses are in the 10-20 Å range (1-2 nm). However, little information exists on the oxidation process at this thickness. Available results are either for thicker layers grown under high-pressure conditions or for only the first couple of monolayers studied under high-vacuum conditions. Now, for the first time, a group of researchers has obtained

  5. Looking at Transistor Gate Oxide Formation in Real Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Looking at Transistor Gate Oxide Formation in Real Time Print The oxide gate layer is critical to every transistor, and present-day layer thicknesses are in the 10-20 Å range (1-2 nm). However, little information exists on the oxidation process at this thickness. Available results are either for thicker layers grown under high-pressure conditions or for only the first couple of monolayers studied under high-vacuum conditions. Now, for the first time, a group of researchers has obtained

  6. Looking at Transistor Gate Oxide Formation in Real Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Looking at Transistor Gate Oxide Formation in Real Time Print The oxide gate layer is critical to every transistor, and present-day layer thicknesses are in the 10-20 Å range (1-2 nm). However, little information exists on the oxidation process at this thickness. Available results are either for thicker layers grown under high-pressure conditions or for only the first couple of monolayers studied under high-vacuum conditions. Now, for the first time, a group of researchers has obtained

  7. Looking at Transistor Gate Oxide Formation in Real Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Looking at Transistor Gate Oxide Formation in Real Time Print The oxide gate layer is critical to every transistor, and present-day layer thicknesses are in the 10-20 Å range (1-2 nm). However, little information exists on the oxidation process at this thickness. Available results are either for thicker layers grown under high-pressure conditions or for only the first couple of monolayers studied under high-vacuum conditions. Now, for the first time, a group of researchers has obtained

  8. Looking at Transistor Gate Oxide Formation in Real Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Looking at Transistor Gate Oxide Formation in Real Time Print The oxide gate layer is critical to every transistor, and present-day layer thicknesses are in the 10-20 Å range (1-2 nm). However, little information exists on the oxidation process at this thickness. Available results are either for thicker layers grown under high-pressure conditions or for only the first couple of monolayers studied under high-vacuum conditions. Now, for the first time, a group of researchers has obtained

  9. Real-space formulation of the electrostatic potential and total...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Real-space formulation of the electrostatic potential and total energy of solids Citation Details In-Document Search Title: Real-space formulation of the ...

  10. Competition Provides Students with Real-World Engineering Experience...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Competition Provides Students with Real-World Engineering Experience Competition Provides Students with Real-World Engineering Experience April 10, 2013 - 12:00am Addthis Fifteen...

  11. FY 2014 Real Property Data Related to Operations and Maintenance...

    Energy Savers [EERE]

    Real Property Data Related to Operations and Maintenance Guidance FY 2014 Real Property Data Related to Operations and Maintenance Guidance FY2014DataRelatedtoOperationsandM...

  12. FY 2013 Real Property Deferred, Actual, and Required Maintenance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Real Property Deferred, Actual, and Required Maintenance Reporting Requirement FY 2013 Real Property Deferred, Actual, and Required Maintenance Reporting Requirement FY 2013 DARM ...

  13. FY 2012 Real Property Deferred, Actual, and Required Maintenance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Real Property Deferred, Actual, and Required Maintenance Reporting Requirement FY 2012 Real Property Deferred, Actual, and Required Maintenance Reporting Requirement FY 2012 DARM ...

  14. FY09_Federal_Real_Property_Reporting_Requirements.pdf | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    yReportingRequirements.pdf More Documents & Publications 2013 guidance fo real Property Inventory Reporting FY 2012 Federal Real Property Reporting Requirement Guidance for...

  15. FY 2012 Federal Real Property Reporting Requirement | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Instructions 2012 final.pdf More Documents & Publications 2013 guidance fo real Property Inventory Reporting FY09FederalRealPropertyReportingRequirements.pdf Guidance for...

  16. Real Goods Solar San Rafael | Open Energy Information

    Open Energy Info (EERE)

    Rafael Jump to: navigation, search Logo: Real Goods Solar San Rafael Name: Real Goods Solar San Rafael Address: 27 Simms Street Place: San Rafael, California Zip: 94901 Sector:...

  17. Real-Time Chemical Imaging of Bacterial Biofilm Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Real-Time Chemical Imaging of Bacterial Biofilm Development Print Scientists have ... The ability to image the chemical reactions in living cells in real time, especially in ...

  18. Tracking Living Cells as They Differentiate in Real Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tracking Living Cells as They Differentiate in Real Time Print Protein phosphorylation ... cells, enabling them to follow cellular chemical changes in real time, without bias. ...

  19. Real Time Diagnostics for Algae-final-sm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Real-time Monitoring And Diagnostics Detecting pathogens and predators to quickly recover ... Real-time Monitoring With Online Algal Reflectance Monitor System Researchers have ...

  20. Tracking Living Cells as They Differentiate in Real Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tracking Living Cells as They Differentiate in Real Time Tracking Living Cells as They Differentiate in Real Time Print Thursday, 27 September 2012 00:00 Protein phosphorylation ...

  1. Wireless technology collects real-time information from oil and...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Wireless technology collects real-time information from oil and gas wells Wireless technology collects real-time information from oil and gas wells The patented system delivers ...

  2. Distributed Intelligence Architecture for Real-Time Control,...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Distributed Intelligence Architecture for Real-Time Control, Protection and Instrumentation Systems Architecture of complex, high-speed, Real-Time Instrumentation, Acquisition, Control ...

  3. Model Simulating Real Domestic Hot Water Use - Building America...

    Energy Savers [EERE]

    Model Simulating Real Domestic Hot Water Use - Building America Top Innovation Model Simulating Real Domestic Hot Water Use - Building America Top Innovation Image of a pipe ...

  4. Real Goods Solar Santa Cruz | Open Energy Information

    Open Energy Info (EERE)

    Cruz Jump to: navigation, search Logo: Real Goods Solar Santa Cruz Name: Real Goods Solar Santa Cruz Address: 1115 Thompson Avenue, 1 Place: Santa Cruz, California Zip: 95062...

  5. Real-Time Chemical Imaging of Bacterial Biofilm Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Real-Time Chemical Imaging of Bacterial Biofilm Development Real-Time Chemical Imaging of Bacterial Biofilm Development Print Wednesday, 25 August 2010 00:00 Scientists have ...

  6. Comparison of Real World Energy Consumption to Models and DOE...

    Broader source: Energy.gov (indexed) [DOE]

    Then, the study determines whether real world energy consumption differed substantially ... Comparison of Real World Energy Consumption to Models and Department of Energy Test ...

  7. Continuous, real time microwave plasma element sensor

    DOE Patents [OSTI]

    Woskov, Paul P.; Smatlak, Donna L.; Cohn, Daniel R.; Wittle, J. Kenneth; Titus, Charles H.; Surma, Jeffrey E.

    1995-01-01

    Microwave-induced plasma for continuous, real time trace element monitoring under harsh and variable conditions. The sensor includes a source of high power microwave energy and a shorted waveguide made of a microwave conductive, refractory material communicating with the source of the microwave energy to generate a plasma. The high power waveguide is constructed to be robust in a hot, hostile environment. It includes an aperture for the passage of gases to be analyzed and a spectrometer is connected to receive light from the plasma. Provision is made for real time in situ calibration. The spectrometer disperses the light, which is then analyzed by a computer. The sensor is capable of making continuous, real time quantitative measurements of desired elements, such as the heavy metals lead and mercury.

  8. Continuous, real time microwave plasma element sensor

    DOE Patents [OSTI]

    Woskov, P.P.; Smatlak, D.L.; Cohn, D.R.; Wittle, J.K.; Titus, C.H.; Surma, J.E.

    1995-12-26

    Microwave-induced plasma is described for continuous, real time trace element monitoring under harsh and variable conditions. The sensor includes a source of high power microwave energy and a shorted waveguide made of a microwave conductive, refractory material communicating with the source of the microwave energy to generate a plasma. The high power waveguide is constructed to be robust in a hot, hostile environment. It includes an aperture for the passage of gases to be analyzed and a spectrometer is connected to receive light from the plasma. Provision is made for real time in situ calibration. The spectrometer disperses the light, which is then analyzed by a computer. The sensor is capable of making continuous, real time quantitative measurements of desired elements, such as the heavy metals lead and mercury. 3 figs.

  9. Axial Tomography from Digitized Real Time Radiography

    DOE R&D Accomplishments [OSTI]

    Zolnay, A. S.; McDonald, W. M.; Doupont, P. A.; McKinney, R. L.; Lee, M. M.

    1985-01-18

    Axial tomography from digitized real time radiographs provides a useful tool for industrial radiography and tomography. The components of this system are: x-ray source, image intensifier, video camera, video line extractor and digitizer, data storage and reconstruction computers. With this system it is possible to view a two dimensional x-ray image in real time at each angle of rotation and select the tomography plane of interest by choosing which video line to digitize. The digitization of a video line requires less than a second making data acquisition relatively short. Further improvements on this system are planned and initial results are reported.

  10. Real-Time Occupancy Change Analyzer

    Energy Science and Technology Software Center (OSTI)

    2005-03-30

    The Real-Time Occupancy Change Analyzer (ROCA) produces an occupancy grid map of an environment around the robot, scans the environment to generate a current obstacle map relative to a current robot position, and converts the current obstacle map to a current occupancy grid map. Changes in the occupancy grid can be reported in real time to support a number of tracking capabilities. The benefit of ROCA is that rather than only providing a vector tomore » the detected change, it provides the actual x,y position of the change.« less

  11. Image processing applied to laser cladding process

    SciTech Connect (OSTI)

    Meriaudeau, F.; Truchetet, F.

    1996-12-31

    The laser cladding process, which consists of adding a melt powder to a substrate in order to improve or change the behavior of the material against corrosion, fatigue and so on, involves a lot of parameters. In order to perform good tracks some parameters need to be controlled during the process. The authors present here a low cost performance system using two CCD matrix cameras. One camera provides surface temperature measurements while the other gives information relative to the powder distribution or geometric characteristics of the tracks. The surface temperature (thanks to Beer Lambert`s law) enables one to detect variations in the mass feed rate. Using such a system the authors are able to detect fluctuation of 2 to 3g/min in the mass flow rate. The other camera gives them information related to the powder distribution, a simple algorithm applied to the data acquired from the CCD matrix camera allows them to see very weak fluctuations within both gaz flux (carriage or protection gaz). During the process, this camera is also used to perform geometric measurements. The height and the width of the track are obtained in real time and enable the operator to find information related to the process parameters such as the speed processing, the mass flow rate. The authors display the result provided by their system in order to enhance the efficiency of the laser cladding process. The conclusion is dedicated to a summary of the presented works and the expectations for the future.

  12. Monitoring external beam radiotherapy using real-time beam visualization

    SciTech Connect (OSTI)

    Jenkins, Cesare H.; Naczynski, Dominik J.; Yu, Shu-Jung S.; Xing, Lei

    2015-01-15

    Purpose: To characterize the performance of a novel radiation therapy monitoring technique that utilizes a flexible scintillating film, common optical detectors, and image processing algorithms for real-time beam visualization (RT-BV). Methods: Scintillating films were formed by mixing Gd{sub 2}O{sub 2}S:Tb (GOS) with silicone and casting the mixture at room temperature. The films were placed in the path of therapeutic beams generated by medical linear accelerators (LINAC). The emitted light was subsequently captured using a CMOS digital camera. Image processing algorithms were used to extract the intensity, shape, and location of the radiation field at various beam energies, dose rates, and collimator locations. The measurement results were compared with known collimator settings to validate the performance of the imaging system. Results: The RT-BV system achieved a sufficient contrast-to-noise ratio to enable real-time monitoring of the LINAC beam at 20 fps with normal ambient lighting in the LINAC room. The RT-BV system successfully identified collimator movements with sub-millimeter resolution. Conclusions: The RT-BV system is capable of localizing radiation therapy beams with sub-millimeter precision and tracking beam movement at video-rate exposure.

  13. A monotonicity conjecture for real cubic maps

    SciTech Connect (OSTI)

    Dawson, S.P.; Galeeva, R.; Milnor, J.; Tresser, C.

    1993-12-01

    This will be an outline of work in progress. We study the conjecture that the topological entropy of a real cubic map depends ``monotonely`` on its parameters, in the sense that each locus of constant entropy in parameter space is a connected set. This material will be presented in more detail in a later paper.

  14. Real-time distributed multimedia systems

    SciTech Connect (OSTI)

    Rahurkar, S.S.; Bourbakis, N.G.

    1996-12-31

    This paper presents a survey on distributed multimedia systems and discusses real-time issues. In particular, different subsystems are reviewed that impact on multimedia networking, the networking for multimedia, the networked multimedia systems, and the leading edge research and developments efforts and issues in networking.

  15. Real Time Grid Reliability Management 2005

    SciTech Connect (OSTI)

    Eto, Joe; Eto, Joe; Lesieutre, Bernard; Lewis, Nancy Jo; Parashar, Manu

    2008-07-07

    The increased need to manage California?s electricity grid in real time is a result of the ongoing transition from a system operated by vertically-integrated utilities serving native loads to one operated by an independent system operator supporting competitive energy markets. During this transition period, the traditional approach to reliability management -- construction of new transmission lines -- has not been pursued due to unresolved issues related to the financing and recovery of transmission project costs. In the absence of investments in new transmission infrastructure, the best strategy for managing reliability is to equip system operators with better real-time information about actual operating margins so that they can better understand and manage the risk of operating closer to the edge. A companion strategy is to address known deficiencies in offline modeling tools that are needed to ground the use of improved real-time tools. This project: (1) developed and conducted first-ever demonstrations of two prototype real-time software tools for voltage security assessment and phasor monitoring; and (2) prepared a scoping study on improving load and generator response models. Additional funding through two separate subsequent work authorizations has already been provided to build upon the work initiated in this project.

  16. FY 2014 Federal Real Property Reporting Requirement | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Federal Real Property Reporting Requirement FY 2014 Federal Real Property Reporting Requirement FIMS FRPP FY 2014 Reporting Instructions Signed Sep 18 2014 .pdf (6.19 MB) More Documents & Publications Guidance for Fiscal Year 2015 Facilities Information Management System Data Validations FY09_Federal_Real_Property_Reporting_Requirements.pdf FY 2012 Federal Real Property Reporting Requirement

  17. FY 2012 Real Property Deferred, Actual, and Required Maintenance Reporting

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Requirement | Department of Energy Real Property Deferred, Actual, and Required Maintenance Reporting Requirement FY 2012 Real Property Deferred, Actual, and Required Maintenance Reporting Requirement FY 2012 DARM Transmittal Letter and Attachment Final.pdf (406.93 KB) More Documents & Publications FY 2013 Real Property Deferred, Actual, and Required Maintenance Reporting Requirement Real Property Maintenance Reporting Requirement Memorandum (July 13, 2010)

  18. 2013 guidance fo real Property Inventory Reporting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    guidance fo real Property Inventory Reporting 2013 guidance fo real Property Inventory Reporting SIGNED_FY13_Rpt_Instructions REV - 2013.08.15.pdf (586.39 KB) More Documents & Publications FY 2012 Federal Real Property Reporting Requirement FY09_Federal_Real_Property_Reporting_Requirements.pdf Guidance for Fiscal Year 2015 Facilities Information Management System Data Validations

  19. Method and apparatus for real time weld monitoring

    DOE Patents [OSTI]

    Leong, Keng H.; Hunter, Boyd V.

    1997-01-01

    An improved method and apparatus are provided for real time weld monitoring. An infrared signature emitted by a hot weld surface during welding is detected and this signature is compared with an infrared signature emitted by the weld surface during steady state conditions. The result is correlated with weld penetration. The signal processing is simpler than for either UV or acoustic techniques. Changes in the weld process, such as changes in the transmitted laser beam power, quality or positioning of the laser beam, change the resulting weld surface features and temperature of the weld surface, thereby resulting in a change in the direction and amount of infrared emissions. This change in emissions is monitored by an IR sensitive detecting apparatus that is sensitive to the appropriate wavelength region for the hot weld surface.

  20. Towards Real-Time High Performance Computing For Power Grid Analysis

    SciTech Connect (OSTI)

    Hui, Peter SY; Lee, Barry; Chikkagoudar, Satish

    2012-11-16

    Real-time computing has traditionally been considered largely in the context of single-processor and embedded systems, and indeed, the terms real-time computing, embedded systems, and control systems are often mentioned in closely related contexts. However, real-time computing in the context of multinode systems, specifically high-performance, cluster-computing systems, remains relatively unexplored. Imposing real-time constraints on a parallel (cluster) computing environment introduces a variety of challenges with respect to the formal verification of the system's timing properties. In this paper, we give a motivating example to demonstrate the need for such a system--- an application to estimate the electromechanical states of the power grid--- and we introduce a formal method for performing verification of certain temporal properties within a system of parallel processes. We describe our work towards a full real-time implementation of the target application--- namely, our progress towards extracting a key mathematical kernel from the application, the formal process by which we analyze the intricate timing behavior of the processes on the cluster, as well as timing measurements taken on our test cluster to demonstrate use of these concepts.

  1. Distributed Real-Time Computing with Harness

    SciTech Connect (OSTI)

    Di Saverio, Emanuele; Cesati, Marco; Di Biagio, Christian; Pennella, Guido; Engelmann, Christian

    2007-01-01

    Modern parallel and distributed computing solutions are often built onto a ''middleware'' software layer providing a higher and common level of service between computational nodes. Harness is an adaptable, plugin-based middleware framework for parallel and distributed computing. This paper reports recent research and development results of using Harness for real-time distributed computing applications in the context of an industrial environment with the needs to perform several safety critical tasks. The presented work exploits the modular architecture of Harness in conjunction with a lightweight threaded implementation to resolve several real-time issues by adding three new Harness plug-ins to provide a prioritized lightweight execution environment, low latency communication facilities, and local timestamped event logging.

  2. Visualizations for Real-time Pricing Demonstration

    SciTech Connect (OSTI)

    Marinovici, Maria C.; Hammerstrom, Janelle L.; Widergren, Steven E.; Dayley, Greg K.

    2014-10-13

    In this paper, the visualization tools created for monitoring the operations of a real-time pricing demonstration system that runs at a distribution feeder level are presented. The information these tools provide gives insights into demand behavior from automated price responsive devices, distribution feeder characteristics, impact of weather on system’s development, and other significant dynamics. Given the large number of devices that bid into a feeder-level real-time electricity market, new techniques are explored to summarize the present state of the system and contrast that with previous trends as well as future projections. To better understand the system behavior and correctly inform decision-making procedures, effective visualization of the data is imperative.

  3. Performance bound for real OTEC heat engines

    SciTech Connect (OSTI)

    Wu, C.

    1987-01-01

    Maximum power and efficiency at the maximum power of an irreversible OTEC heat engine are treated. When time is explicitly considered in the energy exchanges between the heat engine and its surroundings, it is found that there is a bound on the efficiency of the real OTEC heat engine at the maximum power condition. This bound can guide the evaluation of existing OTEC systems or influence design of future OTEC heat engines.

  4. Managing a Real-Time Embedded Linux Platform with Buildroot

    SciTech Connect (OSTI)

    Diamond, J.; Martin, K.

    2015-01-01

    Developers of real-time embedded software often need to build the operating system, kernel, tools and supporting applications from source to work with the differences in their hardware configuration. The first attempts to introduce Linux-based real-time embedded systems into the Fermilab accelerator controls system used this approach but it was found to be time-consuming, difficult to maintain and difficult to adapt to different hardware configurations. Buildroot is an open source build system with a menu-driven configuration tool (similar to the Linux kernel build system) that automates this process. A customized Buildroot [1] system has been developed for use in the Fermilab accelerator controls system that includes several hardware configuration profiles (including Intel, ARM and PowerPC) and packages for Fermilab support software. A bootable image file is produced containing the Linux kernel, shell and supporting software suite that varies from 3 to 20 megabytes large – ideal for network booting. The result is a platform that is easier to maintain and deploy in diverse hardware configurations

  5. Task 1. Monitoring real time materials degradation. NRC extended In-situ and real-time Monitoring

    SciTech Connect (OSTI)

    Bakhtiari, Sasan

    2012-03-01

    The overall objective of this project was to perform a scoping study to identify, in concert with the nuclear industry, those sensors and techniques that have the most promising commercial viability and fill a critical inspection or monitoring need. Candidates to be considered include sensors to monitor real-time material degradation, characterize residual stress, monitor and inspect component fabrication, assess radionuclide and associated chemical species concentrations in ground water and soil, characterize fuel properties, and monitor severe accident conditions. Under Task 1—Monitoring Real-Time Materials Degradation—scoping studies were conducted to assess the feasibility of potential inspection and monitoring technologies (i.e., a combination of sensors, advanced signal processing techniques, and data analysis methods) that could be utilized in LWR and/or advanced reactor applications for continuous monitoring of degradation in-situ. The goal was to identify those techniques that appear to be the most promising, i.e., those that are closest to being both technically and commercially viable and that the nuclear industry is most likely to pursue. Current limitations and associated issues that must be overcome before commercial application of certain techniques have also been addressed.

  6. RTDB: A memory resident real-time object database

    SciTech Connect (OSTI)

    Jerzy M. Nogiec; Eugene Desavouret

    2003-06-04

    RTDB is a fast, memory-resident object database with built-in support for distribution. It constitutes an attractive alternative for architecting real-time solutions with multiple, possibly distributed, processes or agents sharing data. RTDB offers both direct and navigational access to stored objects, with local and remote random access by object identifiers, and immediate direct access via object indices. The database supports transparent access to objects stored in multiple collaborating dispersed databases and includes a built-in cache mechanism that allows for keeping local copies of remote objects, with specifiable invalidation deadlines. Additional features of RTDB include a trigger mechanism on objects that allows for issuing events or activating handlers when objects are accessed or modified and a very fast, attribute based search/query mechanism. The overall architecture and application of RTDB in a control and monitoring system is presented.

  7. Autonomous global sky monitoring with real-time robotic follow...

    Office of Scientific and Technical Information (OSTI)

    Conference: Autonomous global sky monitoring with real-time robotic follow-up Citation Details In-Document Search Title: Autonomous global sky monitoring with real-time robotic...

  8. Looking at Transistor Gate Oxide Formation in Real Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Looking at Transistor Gate Oxide Formation in Real Time Print The oxide gate layer is ... Now, for the first time, a group of researchers has obtained real-time oxidation results ...

  9. Real-Time Quantitative Imaging of Failure Events in Materials...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Real-Time Quantitative Imaging of Failure Events in Materials Under Load at Temperatures Above 1,600 C Real-Time Quantitative Imaging of Failure Events in Materials Under Load at ...

  10. Building America Webinar: Building America: Research for Real...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    America: Research for Real-World Results Building America Webinar: Building America: Research for Real-World Results For 20 years, the U.S. Department of Energy's (DOE) Building ...

  11. Figure ES2. Annual Indices of Real Disposable Income, Vehicle...

    U.S. Energy Information Administration (EIA) Indexed Site

    ES2 Figure ES2. Annual Indices of Real Disposable Income, Vehicle-Miles Traveled, Consumer Price Index (CPI-U), and Real Average Retail Gasoline Price, 1978-2004, 1985100...

  12. The Department's real property assets are vital to the accomplishment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Department&8217;s real property assets are vital to the accomplishment of its mission The Department&8217;s real property assets are vital to the accomplishment of its mission ...

  13. Ames Lab 101: Real-Time 3D Imaging

    ScienceCinema (OSTI)

    Zhang, Song

    2012-08-29

    Ames Laboratory scientist Song Zhang explains his real-time 3-D imaging technology. The technique can be used to create high-resolution, real-time, precise, 3-D images for use in healthcare, security, and entertainment applications.

  14. Efficient Real-Time Time-Dependent Density Functional Theory...

    Office of Scientific and Technical Information (OSTI)

    Efficient Real-Time Time-Dependent Density Functional Theory Method and its Application to a Collision of an Ion with a 2D Material Title: Efficient Real-Time Time-Dependent ...

  15. Real Time Tailpipe Emission Measurements | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Real Time Tailpipe Emission Measurements Real Time Tailpipe Emission Measurements 2002 DEER Conference Presentation: Brookhaven National Laboratory 2002_deer_imre.pdf (1.23 MB) More Documents & Publications Real-Time Simultaneous Measurements of Size, Density, and Composition of Single Ultrafine Diesel Tailpipe Particles Microsoft PowerPoint - 4. ORNL- deer.ppt [Read-Only] Real-Time Measurement of Diesel Trap Efficiency

  16. FY 2013 Real Property Deferred, Actual, and Required Maintenance Reporting

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Requirement | Department of Energy Real Property Deferred, Actual, and Required Maintenance Reporting Requirement FY 2013 Real Property Deferred, Actual, and Required Maintenance Reporting Requirement FY 2013 DARM Transmittal Letter and Attachment Final.pdf (541.36 KB) More Documents & Publications FY 2012 Real Property Deferred, Actual, and Required Maintenance Reporting Requirement FY_09_DM_RM_AM_Reporting_Memo_and_attachment_072009.pdf Real Property Maintenance Reporting Requirement

  17. Funding Opportunity Announcement: Enabling Extreme Real-Time Grid

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Integration of Solar Energy (ENERGISE) | Department of Energy Enabling Extreme Real-Time Grid Integration of Solar Energy (ENERGISE) Funding Opportunity Announcement: Enabling Extreme Real-Time Grid Integration of Solar Energy (ENERGISE) Funding Opportunity Announcement: Enabling Extreme Real-Time Grid Integration of Solar Energy (ENERGISE) Funding Number: DE-FOA-0001495 Funding Amount: $25,000,000 Description The Enabling Extreme Real-Time Grid Integration of Solar Energy (ENERGISE) funding

  18. Jefferson Lab experiment works to clarify Real Compton Scattering |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jefferson Lab experiment works to clarify Real Compton Scattering Real Compton Scattering experiment spokespeople The Real Compton Scattering experiment spokespeople take a short break for a photo. From left is Bogdan Wojtsekhowski, JLab staff scientist; Charles Hyde-Wright, physics professor at Old Dominion University; and Alan Nathan, physics professor at the University of Illinois and chair of the JLab Users Group. Jefferson Lab experiment works to clarify Real Compton Scattering January

  19. Guiding Principles of Real Property Asset Management | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Guiding Principles of Real Property Asset Management Guiding Principles of Real Property Asset Management frpc_guidance_final.pdf (318.72 KB) More Documents & Publications 2015 Federal Real Property Council Reporting Guidance FRPC User Guidance -for FY2006 FRPC User Guidance -for FY2006

  20. The RealGas and RealGasH2O Options of the TOUGH+ Code for the...

    Office of Scientific and Technical Information (OSTI)

    Flow in TightShale Gas Systems Citation Details In-Document Search Title: The RealGas and RealGasH2O Options of the TOUGH+ Code for the Simulation of Coupled Fluid and Heat Flow ...

  1. NSTX power supply real time controller

    SciTech Connect (OSTI)

    Neumeyer, C.; Hatcher, R.; Marsala, R.; Ramakrishnan, S.

    2000-01-06

    The NSTX is a new national facility for the study of plasma confinement, heating, and current drive in a low aspect ratio, spherical torus (ST) configuration. The ST configuration is an alternate magnetic confinement concept which is characterized by high beta (ratio plasma pressure to magnetic field pressure) and low toroidal field compared to conventional tokamaks, and could provide a pathway to the realization of a practical fusion power source. The NSTX depends on a real time, high speed, synchronous, and deterministic control system acting on a system of thyristor rectifier power supplies to (1) establish the initial magnetic field configuration; (2) initiate plasma within the vacuum vessel; (3) inductively drive plasma current; and (4) control plasma position and shape. For the initial ``day 0'' 1st plasma operations (Feb. 1999), the system was limited to closed loop proportional-integral current control of the power supplies based on preprogrammed reference waveforms. For the ``day 1'' phase of operations beginning Sept. 1999 the loop has been closed on plasma current and position. This paper focuses on the Power Supply Real Time Controller (PSRTC).

  2. Table of Contents for Desk Guide

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    September, 2014 U. S. Department of Energy - Real Estate Desk Guide Revised 2014 Real Estate Desk Guide Table of Contents Chapter 1-- Purpose of Desk Guide............................................................................... 1 Chapter 2-- Introduction ................................................................................................. 3 Chapter 3-- Planning Policy ........................................................................................... 9 Chapter 4-- Real

  3. Real-time geo-registration of imagery using COTS graphics processors

    DOE Patents [OSTI]

    Flath, Laurence M.; Kartz, Michael W.

    2009-06-30

    A method of performing real-time geo-registration of high-resolution digital imagery using existing graphics processing units (GPUs) already found in current personal computers, rather than the main central processing unit (CPU). Digital image data captured by a camera (along with inertial navigation system (INS) data associated with the image data) is transferred to and processed by the GPU to perform the calculations involved in transforming the captured image into a geo-rectified, nadir-looking image. By using the GPU, the order-of-magnitude increase in throughput over conventional software techniques makes real-time geo-registration possible without the significant cost of custom hardware solutions.

  4. In-line real time air monitor

    DOE Patents [OSTI]

    Wise, M.B.; Thompson, C.V.

    1998-07-14

    An in-line gas monitor capable of accurate gas composition analysis in a continuous real time manner even under strong applied vacuum conditions operates by mixing an air sample with helium forming a sample gas in two complementary sample loops embedded in a manifold which includes two pairs of 3-way solenoid valves. The sample gas is then analyzed in an ion trap mass spectrometer on a continuous basis. Two valve drivers actuate the two pairs of 3-way valves in a reciprocating fashion, so that there is always flow through the in-line gas monitor via one or the other of the sample loops. The duty cycle for the two pairs of 3-way valves is varied by tuning the two valve drivers to a duty cycle typically between 0.2 to 0.7 seconds. 3 figs.

  5. In-line real time air monitor

    DOE Patents [OSTI]

    Wise, Marcus B.; Thompson, Cyril V.

    1998-01-01

    An in-line gas monitor capable of accurate gas composition analysis in a continuous real time manner even under strong applied vacuum conditions operates by mixing an air sample with helium forming a sample gas in two complementary sample loops embedded in a manifold which includes two pairs of 3-way solenoid valves. The sample gas is then analyzed in an ion trap mass spectrometer on a continuous basis. Two valve drivers actuate the two pairs of 3-way valves in a reciprocating fashion, so that there is always flow through the in-line gas monitor via one or the other of the sample loops. The duty cycle for the two pairs of 3-way valves is varied by tuning the two valve drivers to a duty cycle typically between 0.2 to 0.7 seconds.

  6. Real time speech formant analyzer and display

    DOE Patents [OSTI]

    Holland, G.E.; Struve, W.S.; Homer, J.F.

    1987-02-03

    A speech analyzer for interpretation of sound includes a sound input which converts the sound into a signal representing the sound. The signal is passed through a plurality of frequency pass filters to derive a plurality of frequency formants. These formants are converted to voltage signals by frequency-to-voltage converters and then are prepared for visual display in continuous real time. Parameters from the inputted sound are also derived and displayed. The display may then be interpreted by the user. The preferred embodiment includes a microprocessor which is interfaced with a television set for displaying of the sound formants. The microprocessor software enables the sound analyzer to present a variety of display modes for interpretive and therapeutic used by the user. 19 figs.

  7. Real time speech formant analyzer and display

    DOE Patents [OSTI]

    Holland, George E.; Struve, Walter S.; Homer, John F.

    1987-01-01

    A speech analyzer for interpretation of sound includes a sound input which converts the sound into a signal representing the sound. The signal is passed through a plurality of frequency pass filters to derive a plurality of frequency formants. These formants are converted to voltage signals by frequency-to-voltage converters and then are prepared for visual display in continuous real time. Parameters from the inputted sound are also derived and displayed. The display may then be interpreted by the user. The preferred embodiment includes a microprocessor which is interfaced with a television set for displaying of the sound formants. The microprocessor software enables the sound analyzer to present a variety of display modes for interpretive and therapeutic used by the user.

  8. Real-World Hydrogen Technology Validation: Preprint

    SciTech Connect (OSTI)

    Sprik, S.; Kurtz, J.; Wipke, K.; Ramsden, T.; Ainscough, C.; Eudy, L.; Saur, G.

    2012-03-01

    The Department of Energy, the Department of Defense's Defense Logistics Agency, and the Department of Transportation's Federal Transit Administration have funded learning demonstrations and early market deployments to provide insight into applications of hydrogen technologies on the road, in the warehouse, and as stationary power. NREL's analyses validate the technology in real-world applications, reveal the status of the technology, and facilitate the development of hydrogen and fuel cell technologies, manufacturing, and operations. This paper presents the maintenance, safety, and operation data of fuel cells in multiple applications with the reported incidents, near misses, and frequencies. NREL has analyzed records of more than 225,000 kilograms of hydrogen that have been dispensed through more than 108,000 hydrogen fills with an excellent safety record.

  9. REAL TIME DATA FOR REMEDIATION ACTIVITIES [11505

    SciTech Connect (OSTI)

    BROCK CT

    2011-01-13

    Health physicists from the CH2M HILL Plateau Remediation Company collaborated with Berkeley Nucleonics Corporation to modify the SAM 940 isotope identifier instrument to be used for nuclear waste remediation. These modifications coupled with existing capabilities of the SAM 940 have proven to be invaluable during remediation activities, reducing disposal costs by allowing swift remediation of targeted areas that have been identified as having isotopes of concern (IOC), and eliminating multiple visits to sites by declaring an excavation site clear of IOCs before demobilizing from the site. These advantages are enabled by accumulating spectral data for specific isotopes that is nearly 100 percent free of false positives, which are filtered out in 'real time.'

  10. Real-time multi-mode neutron multiplicity counter

    DOE Patents [OSTI]

    Rowland, Mark S; Alvarez, Raymond A

    2013-02-26

    Embodiments are directed to a digital data acquisition method that collects data regarding nuclear fission at high rates and performs real-time preprocessing of large volumes of data into directly useable forms for use in a system that performs non-destructive assaying of nuclear material and assemblies for mass and multiplication of special nuclear material (SNM). Pulses from a multi-detector array are fed in parallel to individual inputs that are tied to individual bits in a digital word. Data is collected by loading a word at the individual bit level in parallel, to reduce the latency associated with current shift-register systems. The word is read at regular intervals, all bits simultaneously, with no manipulation. The word is passed to a number of storage locations for subsequent processing, thereby removing the front-end problem of pulse pileup. The word is used simultaneously in several internal processing schemes that assemble the data in a number of more directly useable forms. The detector includes a multi-mode counter that executes a number of different count algorithms in parallel to determine different attributes of the count data.

  11. Real-time holographic surveillance system

    DOE Patents [OSTI]

    Collins, H.D.; McMakin, D.L.; Hall, T.E.; Gribble, R.P.

    1995-10-03

    A holographic surveillance system is disclosed including means for generating electromagnetic waves; means for transmitting the electromagnetic waves toward a target at a plurality of predetermined positions in space; means for receiving and converting electromagnetic waves reflected from the target to electrical signals at a plurality of predetermined positions in space; means for processing the electrical signals to obtain signals corresponding to a holographic reconstruction of the target; and means for displaying the processed information to determine nature of the target. The means for processing the electrical signals includes means for converting analog signals to digital signals followed by a computer means to apply a backward wave algorithm. 21 figs.

  12. Real-time holographic surveillance system

    DOE Patents [OSTI]

    Collins, H. Dale; McMakin, Douglas L.; Hall, Thomas E.; Gribble, R. Parks

    1995-01-01

    A holographic surveillance system including means for generating electromagnetic waves; means for transmitting the electromagnetic waves toward a target at a plurality of predetermined positions in space; means for receiving and converting electromagnetic waves reflected from the target to electrical signals at a plurality of predetermined positions in space; means for processing the electrical signals to obtain signals corresponding to a holographic reconstruction of the target; and means for displaying the processed information to determine nature of the target. The means for processing the electrical signals includes means for converting analog signals to digital signals followed by a computer means to apply a backward wave algorithm.

  13. Easy and hard testbeds for real-time search algorithms

    SciTech Connect (OSTI)

    Koenig, S.; Simmons, R.G.

    1996-12-31

    Although researchers have studied which factors influence the behavior of traditional search algorithms, currently not much is known about how domain properties influence the performance of real-time search algorithms. In this paper we demonstrate, both theoretically and experimentally, that Eulerian state spaces (a super set of undirected state spaces) are very easy for some existing real-time search algorithms to solve: even real-time search algorithms that can be intractable, in general, are efficient for Eulerian state spaces. Because traditional real-time search testbeds (such as the eight puzzle and gridworlds) are Eulerian, they cannot be used to distinguish between efficient and inefficient real-time search algorithms. It follows that one has to use non-Eulerian domains to demonstrate the general superiority of a given algorithm. To this end, we present two classes of hard-to-search state spaces and demonstrate the performance of various real-time search algorithms on them.

  14. Real-Time Simultaneous Measurements of Size, Density, and Composition...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Simultaneous Measurements of Size, Density, and Composition of Single Ultrafine Diesel Tailpipe Particles Real-Time Simultaneous Measurements of Size, Density, and Composition of ...

  15. 2012 Federal Real Property Council Reporting Guidance | Department...

    Broader source: Energy.gov (indexed) [DOE]

    2012 Data Dictionary FINAL.pdf More Documents & Publications 2015 Federal Real Property Council Reporting Guidance FRPC User Guidance -for FY2006 FRPC User Guidance -for FY2006...

  16. "Table 2. Real Average Annual Coal Transportation Costs, By Primary...

    U.S. Energy Information Administration (EIA) Indexed Site

    Real Average Annual Coal Transportation Costs, By Primary Transport Mode and Supply Region" "(2013 dollars per ton)" "Coal Supply Region",2008,2009,2010,2011,2012,2013 "Railroad"...

  17. Table 1. Real Average Transportation and Delivered Costs of Coal...

    U.S. Energy Information Administration (EIA) Indexed Site

    Real Average Transportation and Delivered Costs of Coal, By Year and Primary Transport Mode" "Year","Average Transportation Cost of Coal (Dollars per Ton)","Average Delivered Cost...

  18. Autonomous global sky monitoring with real-time robotic follow...

    Office of Scientific and Technical Information (OSTI)

    anomalous behavior, selecting targets for detailed investigation, and making real-time anomaly detection to enable rapid recognition and a swift response to transients as...

  19. Building America Webinar: Building America: Research for Real...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    America: Research for Real-World Results Building America Webinar: Building America: ... I DOE ZERH Webinar: Technical Resources for Marketing and Selling Zero Energy Ready Homes

  20. Optical Method for Automated Real Time Control of Elemental Compositio...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Optical Method for Automated Real Time Control of Elemental Composition, Distribution, and Film Thickness in CIGS Solar Cell Production National Renewable Energy Laboratory Contact ...

  1. Scientists Probe Lithium-Sulfur Batteries in Real Time - Joint...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7, 2012, Videos Scientists Probe Lithium-Sulfur Batteries in Real Time Lithium-sulfur batteries are a promising technology that could some day power electric vehicles. Scientists ...

  2. Genetically encoded sensors enable real-time observation of metabolite...

    Office of Scientific and Technical Information (OSTI)

    Title: Genetically encoded sensors enable real-time observation of metabolite production Authors: Rogers, Jameson K. ; Church, George M. Publication Date: 2016-02-08 OSTI ...

  3. Tracking Living Cells as They Differentiate in Real Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tracking Living Cells as They Differentiate in Real Time Print Protein phosphorylation regulates protein function in a cell, either activating or inactivating the proteins...

  4. MHK Projects/Leancon Real Sea Test | Open Energy Information

    Open Energy Info (EERE)

    Leancon Real Sea Test < MHK Projects Jump to: navigation, search << Return to the MHK database homepage Loading map... "minzoom":false,"mappingservice":"googlemaps3","type":"ROADM...

  5. Real-Time Chemical Imaging of Bacterial Biofilm Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Real-Time Chemical Imaging of Bacterial Biofilm Development Print Scientists have developed a robust and label-free method to probe the chemical underpinnings of developing bacterial ...

  6. Real-time condition assessment of RAPTOR telescope systems (Journal...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Real-time condition assessment of RAPTOR telescope systems Citation Details In-Document Search ... Publication Date: 2011-09-08 OSTI Identifier: 1095860 Report ...

  7. Computing Eigenvalues of Real Symmetric Matrices Using Rational...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    matrices are real symmetric, most such methods rely on complex arithmetic, to solve the linear systems that arise in their implementations. An appealing technique for overcoming...

  8. Towards a Scalable and Reliable Real Time In-Network Data Analysis Infrastructure

    SciTech Connect (OSTI)

    Ciraci, Selim; Yin, Jian

    2011-12-01

    The smart grid applications requires real time analysis, response within the order of milliseconds and high-reliability because of the mission critical structure of the power grid system. The only way to satisfy these requirements is in network data analysis and build-in redundancy routing for failures. To achieve this, we propose a data dissemination system that builds routes using network flow algorithms, have in network processing of the data and utilize data encoding to cope with high latencies.

  9. REAL-TIME TRACER MONITORING OF RESERVOIR STIMULATION PROCEDURES VIA ELECTRONIC WIRELINE AND TELEMETRY DATA TRANSMISSION

    SciTech Connect (OSTI)

    George Scott III

    2003-08-01

    Ongoing Phase 2-3 work comprises the final development and field-testing of two complementary real-time reservoir technologies; a stimulation process and a tracer fracturing diagnostic system. Initial DE-FC26-99FT40129 project work included research, development, and testing of the patented gamma tracer fracturing diagnostic system. This process was field-proven to be technically useful in providing tracer measurement of fracture height while fracturing; however, technical licensing restrictions blocked Realtimezone from fully field-testing this real-time gamma diagnostic system, as originally planned. Said restrictions were encountered during Phase 2 field test work as result of licensing limitations and potential conflicts between service companies participating in project work, as related to their gamma tracer logging tool technology. Phase 3 work principally demonstrated field-testing of Realtimezone (RTZ) and NETL's Downhole-mixed Reservoir Stimulation process. Early on, the simplicity of and success of downhole-mixing was evident from well tests, which were made commercially productive. A downhole-mixed acid stimulation process was tested successfully and is currently commercially used in Canada. The fourth well test was aborted due to well bore conditions, and an alternate test project is scheduled April, 2004. Realtimezone continues to effectuate ongoing patent protection in the United States and foreign markets. In 2002, Realtimezone and the NETL licensed their United States patent to Halliburton Energy Services (HES). Additional licensing arrangements with other industry companies are anticipated in 2004-2005. Ongoing Phase 2 and Phase 3 field-testing continues to confirm applications of both real-time technologies. Technical data transfer to industry is ongoing via Internet tech-transfer and various industry presentations and publications including Society of Petroleum Engineers. These real-time enhanced stimulation procedures should significantly

  10. Signal Processing, Analysis, & Display

    Energy Science and Technology Software Center (OSTI)

    1986-06-01

    SIG is a general-purpose signal processing, analysis, and display program. Its main purpose is to perform manipulations on time- and frequency-domain signals. However, it has been designed to ultimately accommodate other representations for data such as multiplexed signals and complex matrices. Two user interfaces are provided in SIG - a menu mode for the unfamiliar user and a command mode for more experienced users. In both modes errors are detected as early as possible andmoreare indicated by friendly, meaningful messages. An on-line HELP package is also included. A variety of operations can be performed on time- and frequency-domain signals including operations on the samples of a signal, operations on the entire signal, and operations on two or more signals. Signal processing operations that can be performed are digital filtering (median, Bessel, Butterworth, and Chebychev), ensemble average, resample, auto and cross spectral density, transfer function and impulse response, trend removal, convolution, Fourier transform and inverse window functions (Hamming, Kaiser-Bessel), simulation (ramp, sine, pulsetrain, random), and read/write signals. User definable signal processing algorithms are also featured. SIG has many options including multiple commands per line, command files with arguments,commenting lines, defining commands, and automatic execution for each item in a repeat sequence. Graphical operations on signals and spectra include: x-y plots of time signals; real, imaginary, magnitude, and phase plots of spectra; scaling of spectra for continuous or discrete domain; cursor zoom; families of curves; and multiple viewports.less

  11. Real-time wideband holographic surveillance system

    DOE Patents [OSTI]

    Sheen, David M.; Collins, H. Dale; Hall, Thomas E.; McMakin, Douglas L.; Gribble, R. Parks; Severtsen, Ronald H.; Prince, James M.; Reid, Larry D.

    1996-01-01

    A wideband holographic surveillance system including a transceiver for generating a plurality of electromagnetic waves; antenna for transmitting the electromagnetic waves toward a target at a plurality of predetermined positions in space; the transceiver also receiving and converting electromagnetic waves reflected from the target to electrical signals at a plurality of predetermined positions in space; a computer for processing the electrical signals to obtain signals corresponding to a holographic reconstruction of the target; and a display for displaying the processed information to determine nature of the target. The computer has instructions to apply a three dimensional backward wave algorithm.

  12. Real-time wideband holographic surveillance system

    DOE Patents [OSTI]

    Sheen, D.M.; Collins, H.D.; Hall, T.E.; McMakin, D.L.; Gribble, R.P.; Severtsen, R.H.; Prince, J.M.; Reid, L.D.

    1996-09-17

    A wideband holographic surveillance system including a transceiver for generating a plurality of electromagnetic waves; antenna for transmitting the electromagnetic waves toward a target at a plurality of predetermined positions in space; the transceiver also receiving and converting electromagnetic waves reflected from the target to electrical signals at a plurality of predetermined positions in space; a computer for processing the electrical signals to obtain signals corresponding to a holographic reconstruction of the target; and a display for displaying the processed information to determine nature of the target. The computer has instructions to apply a three dimensional backward wave algorithm. 28 figs.

  13. Proposal Process

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Proposal Process Network R&D Software-Defined Networking (SDN) Experimental Network Testbeds 100G SDN Testbed Testbed Description Proposal Process Terms and Conditions Dark Fiber Testbed Test Circuit Service Testbed Results Current Testbed Research Previous Testbed Research Performance (perfSONAR) Software & Tools Development Data for Researchers Partnerships Publications Workshops Contact Us Technical Assistance: 1 800-33-ESnet (Inside US) 1 800-333-7638 (Inside US) 1 510-486-7600

  14. Selection Process

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Selection Process Selection Process Fellowships will be awarded based on academic excellence, relevance of candidate's research to the laboratory mission in fundamental nuclear science and relevance to Global Security or Science of Campaign missions. Contacts Director Albert Migliori Deputy Franz Freibert 505 667-6879 Email Professional Staff Assistant Susan Ramsay 505 665 0858 Email The Seaborg internal advisory committee will judge applications based on academic excellence, relevance of the

  15. Growth mechanisms, polytypism, and real structure of kaolinite microcrystals

    SciTech Connect (OSTI)

    Samotoin, N. D.

    2008-09-15

    The mechanisms of growth of kaolinite microcrystals (0.1-5.0 {mu}m in size) at deposits related to the cluvial weathering crust, as well as to the low-temperature and medium-temperature hydrothermal processes of transformations of minerals in different rocks in Russia, Kazakhstan, Ukraine, Czechia, Vietnam, India, Cuba, and Madagascar, are investigated using transmission electron microscopy and vacuum decoration with gold. It is established that kaolinite microcrystals grow according to two mechanisms: the mechanism of periodic formation of two-dimensional nuclei and the mechanism of spiral growth. The spiral growth of kaolinite microcrystals is dominant and occurs on steps of screw dislocations that differ in sign and magnitude of the Burgers vector along the c axis. The layered growth of kaolinite originates from a widespread source in the form of a step between polar (+ and -) dislocations, i.e., a growth analogue of the Frank-Read dislocation source. The density of growth screw dislocations varies over a wide range and can be as high as {approx}10{sup 9} cm{sup -2}. Layered stepped kaolinite growth pyramids for all mechanisms of growth on the (001) face of kaolinite exhibit the main features of the triclinic 1Tc and real structures of this mineral.

  16. Map Matching and Real World Integrated Sensor Data Warehousing (Presentation)

    SciTech Connect (OSTI)

    Burton, E.

    2014-02-01

    The inclusion of interlinked temporal and spatial elements within integrated sensor data enables a tremendous degree of flexibility when analyzing multi-component datasets. The presentation illustrates how to warehouse, process, and analyze high-resolution integrated sensor datasets to support complex system analysis at the entity and system levels. The example cases presented utilizes in-vehicle sensor system data to assess vehicle performance, while integrating a map matching algorithm to link vehicle data to roads to demonstrate the enhanced analysis possible via interlinking data elements. Furthermore, in addition to the flexibility provided, the examples presented illustrate concepts of maintaining proprietary operational information (Fleet DNA) and privacy of study participants (Transportation Secure Data Center) while producing widely distributed data products. Should real-time operational data be logged at high resolution across multiple infrastructure types, map matched to their associated infrastructure, and distributed employing a similar approach; dependencies between urban environment infrastructures components could be better understood. This understanding is especially crucial for the cities of the future where transportation will rely more on grid infrastructure to support its energy demands.

  17. Towards a Real-Time Cluster Computing Infrastructure

    SciTech Connect (OSTI)

    Hui, Peter SY; Chikkagoudar, Satish; Chavarría-Miranda, Daniel; Johnston, Mark R.

    2011-11-01

    Real-time computing has traditionally been considered largely in the context of single-processor and embedded systems, and indeed, the terms real-time computing, embedded systems, and control systems are often mentioned in closely related contexts. However, real-time computing in the context of multinode systems, specifically high-performance, cluster-computing systems, remains relatively unexplored, largely due to the fact that until now, there has not been a need for such an environment. In this paper, we motivate the need for a cluster computing infrastructure capable of supporting computation over large datasets in real-time. Our motivating example is an analytical framework to support the next generation North American power grid, which is growing both in size and complexity. With streaming sensor data in the future power grid potentially reaching rates on the order of terabytes per day, the task of analyzing this data subject to real-time guarantees becomes a daunting task which will require the power of high-performance cluster computing capable of functioning under real-time constraints. One specific challenge that such an environment presents is the need for real-time networked communication between cluster nodes. In this paper, we discuss the need for real-time high-performance cluster computation, along with our work-in-progress towards an infrastructure which will ultimately enable such an environment.

  18. Real-time hydro coordination and economic hydro optimization

    SciTech Connect (OSTI)

    Dasigenis, A.T.; Garcia-San Pedro, A.R.

    1995-12-31

    This paper addresses the real-time aspects of the Hydro-Thermal Coordination problem. It describes the real-time modeling and monitoring of hydro resources, and the use of the resulting real-time hydraulic data in the on-line Economic Dispatch algorithm. A variable head, hydro loss model is incorporated that allows for on-line changes to the hydro topology. The method presented provides the operator with a current view of the available water resources, enables the validation of the real-time hydro data received from the field, and enables real-time optimization of the Hydro-Thermal Unit Commitment plan. The implementation of this approach on the Iberdrola system in Spain is described.

  19. Development plan for an advanced drilling system with real-time diagnostics (Diagnostics-While-Drilling)

    SciTech Connect (OSTI)

    FINGER,JOHN T.; MANSURE,ARTHUR J.; PRAIRIE,MICHAEL R.; GLOWKA,D.A.

    2000-02-01

    This proposal provides the rationale for an advanced system called Diagnostics-while-drilling (DWD) and describes its benefits, preliminary configuration, and essential characteristics. The central concept is a closed data circuit in which downhole sensors collect information and send it to the surface via a high-speed data link, where it is combined with surface measurements and processed through drilling advisory software. The driller then uses this information to adjust the drilling process, sending control signals back downhole with real-time knowledge of their effects on performance. The report presents background of related previous work, and defines a Program Plan for US Department of Energy (DOE), university, and industry cooperation.

  20. Real-time observation of dynamic process of oxygen vacancy migration...

    Office of Scientific and Technical Information (OSTI)

    1 ; Collaborative Innovation Center of Quantum Matter, Beijing 100871 2 + Show Author Affiliations Beijing National Laboratory for Condensed Matter Physics and Institute ...

  1. FLUORINATION PROCESS

    DOE Patents [OSTI]

    McMillan, T.S.

    1957-10-29

    A process for the fluorination of uranium metal is described. It is known that uranium will react with liquid chlorine trifluoride but the reaction proceeds at a slow rate. However, a mixture of a halogen trifluoride together with hydrogen fluoride reacts with uranium at a significantly faster rate than does a halogen trifluoride alone. Bromine trifluoride is suitable for use in the process, but chlorine trifluoride is preferred. Particularly suitable is a mixture of ClF/sub 3/ and HF having a mole ratio (moles

  2. MO-G-BRE-01: A Real-Time Virtual Delivery System for Photon Radiotherapy Delivery Monitoring

    SciTech Connect (OSTI)

    Shi, F; Gu, X; Jiang, S; Jia, X; Graves, Y

    2014-06-15

    Purpose: Treatment delivery monitoring is important for radiotherapy, which enables catching dosimetric error at the earliest possible opportunity. This project develops a virtual delivery system to monitor the dose delivery process of photon radiotherapy in real-time using GPU-based Monte Carlo (MC) method. Methods: The simulation process consists of 3 parallel CPU threads. A thread T1 is responsible for communication with a linac, which acquires a set of linac status parameters, e.g. gantry angles, MLC configurations, and beam MUs every 20 ms. Since linac vendors currently do not offer interface to acquire data in real time, we mimic this process by fetching information from a linac dynalog file at the set frequency. Instantaneous beam fluence map (FM) is calculated. A FM buffer is also created in T1 and the instantaneous FM is accumulated to it. This process continues, until a ready signal is received from thread T2 on which an inhouse developed MC dose engine executes on GPU. At that moment, the accumulated FM is transferred to T2 for dose calculations, and the FM buffer in T1 is cleared. Once the calculation finishes, the resulting 3D dose distribution is directed to thread T3, which displays it in three orthogonal planes overlaid on the CT image for treatment monitoring. This process continues to monitor the 3D dose distribution in real-time. Results: An IMRT and a VMAT cases used in our patient-specific QA are studied. Maximum dose differences between our system and treatment planning system are 0.98% and 1.58% for the two cases, respectively. The average time per MC calculation is 0.1sec with <2% relative uncertainty. The update frequency of ∼10Hz is considered as real time. Conclusion: By embedding a GPU-based MC code in a novel data/work flow, it is possible to achieve real-time MC dose calculations to monitor delivery process.

  3. Real Time Flux Control in PM Motors

    SciTech Connect (OSTI)

    Otaduy, P.J.

    2005-09-27

    Significant research at the Oak Ridge National Laboratory (ORNL) Power Electronics and Electric Machinery Research Center (PEEMRC) is being conducted to develop ways to increase (1) torque, (2) speed range, and (3) efficiency of traction electric motors for hybrid electric vehicles (HEV) within existing current and voltage bounds. Current is limited by the inverter semiconductor devices' capability and voltage is limited by the stator wire insulation's ability to withstand the maximum back-electromotive force (emf), which occurs at the upper end of the speed range. One research track has been to explore ways to control the path and magnitude of magnetic flux while the motor is operating. The phrase, real time flux control (RTFC), refers to this mode of operation in which system parameters are changed while the motor is operating to improve its performance and speed range. RTFC has potential to meet an increased torque demand by introducing additional flux through the main air gap from an external source. It can augment the speed range by diverting flux away from the main air gap to reduce back-emf at high speeds. Conventional RTFC technology is known as vector control [1]. Vector control decomposes the stator current into two components; one that produces torque and a second that opposes (weakens) the magnetic field generated by the rotor, thereby requiring more overall stator current and reducing the efficiency. Efficiency can be improved by selecting a RTFC method that reduces the back-emf without increasing the average current. This favors methods that use pulse currents or very low currents to achieve field weakening. Foremost in ORNL's effort to develop flux control is the work of J. S. Hsu. Early research [2,3] introduced direct control of air-gap flux in permanent magnet (PM) machines and demonstrated it with a flux-controlled generator. The configuration eliminates the problem of demagnetization because it diverts all the flux from the magnets instead of

  4. Regarding Request for Information Published at 75 Fed. Reg. 26...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Real Estate Roundtable is pleased to provide these comments in response to the Request ... The Real Estate Roundtable brings together leaders of the nation's top publicly-held and ...

  5. DOJ Title Standards for Acquisition | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOJ Title Standards for Acquisition DOJ Title Standards for Acquisition Title Standards 2001 (580.64 KB) More Documents & Publications Acquisition Guide for Federal Agencies REAL ESTATE PROPERTY GUIDE 2014 REAL ESTATE PROPERTY GUIDE 2013

  6. Better Buildings Network View November 2015

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BetterBuildings Network View News From the Field Capturing Efficiency in Residential Real Estate Transactions The U.S. Departmenr of Energy (DOE) has released More Real Estate ...

  7. Real time viability detection of bacterial spores

    DOE Patents [OSTI]

    Vanderberg, Laura A.; Herdendorf, Timothy J.; Obiso, Richard J.

    2003-07-29

    This invention relates to a process for detecting the presence of viable bacterial spores in a sample and to a spore detection system, the process including placing a sample in a germination medium for a period of time sufficient for commitment of any present viable bacterial spores to occur, mixing the sample with a solution of a lanthanide capable of forming a fluorescent complex with dipicolinic acid, and, measuring the sample for the presence of dipicolinic acid, and the system including a germination chamber having inlets from a sample chamber, a germinant chamber and a bleach chamber, the germination chamber further including an outlet through a filtering means, the outlet connected to a detection chamber, the detection chamber having an inlet from a fluorescence promoting metal chamber and the detection chamber including a spectral excitation source and a means of measuring emission spectra from a sample, the detection chamber further connected to a waste chamber. A germination reaction mixture useful for promoting commitment of any viable bacterial spores in a sample including a combination of L-alanine, L-asparagine and D-glucose is also described.

  8. Process Monitor

    Energy Science and Technology Software Center (OSTI)

    2003-12-01

    This library is used to get process information (eg memory and timing). By setting an environment variable, the runtime system loads libprocmon.so while loading your executable. This library causes the SIGPROF signal to be triggered at time intervals. The procmon signal handler calls various system routines (eg clock_gettime, malinfo, getrusage, and ioctl {accessing the /proc filesystem}) to gather information about the process. The information is then printed to a file which can be viewed graphicallymore » via procmon_plot.pl. This information is obtained via a sampling approach. As with any sampling approach, the information it gathers will not be completely accurate. For example, if you are looking at memory high-water mark the memory allocation and freeing could have occurred between samples and thus would not be "seen" by this program. See "Usage" below for environment variables that affect this monitor (eg time between sampling).« less

  9. Process Limits

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Records Management » Procedures and Instructions Procedures and Instructions keyboard-886462_960_720.jpg Records Management Processes Procedure for Conducting a Records Inventory (PDF) Procedure for Preparing a Records Inventory and Disposition Schedule (RIDS) (PDF) Instructions/Brochures Managing Social Media Records (PDF) Procedures for Departing Employees (PDF) Reminder for Senior Officials (PDF) Your Records Responsibility Pamphlet (PDF) Vital Records Pamphlet (PDF) Records Management

  10. Real-time system for imaging and object detection with a multistatic GPR array

    DOE Patents [OSTI]

    Paglieroni, David W; Beer, N Reginald; Bond, Steven W; Top, Philip L; Chambers, David H; Mast, Jeffrey E; Donetti, John G; Mason, Blake C; Jones, Steven M

    2014-10-07

    A method and system for detecting the presence of subsurface objects within a medium is provided. In some embodiments, the imaging and detection system operates in a multistatic mode to collect radar return signals generated by an array of transceiver antenna pairs that is positioned across the surface and that travels down the surface. The imaging and detection system pre-processes the return signal to suppress certain undesirable effects. The imaging and detection system then generates synthetic aperture radar images from real aperture radar images generated from the pre-processed return signal. The imaging and detection system then post-processes the synthetic aperture radar images to improve detection of subsurface objects. The imaging and detection system identifies peaks in the energy levels of the post-processed image frame, which indicates the presence of a subsurface object.

  11. Hydropyrolysis process

    DOE Patents [OSTI]

    Ullman, Alan Z.; Silverman, Jacob; Friedman, Joseph

    1986-01-01

    An improved process for producing a methane-enriched gas wherein a hydrogen-deficient carbonaceous material is treated with a hydrogen-containing pyrolysis gas at an elevated temperature and pressure to produce a product gas mixture including methane, carbon monoxide and hydrogen. The improvement comprises passing the product gas mixture sequentially through a water-gas shift reaction zone and a gas separation zone to provide separate gas streams of methane and of a recycle gas comprising hydrogen, carbon monoxide and methane for recycle to the process. A controlled amount of steam also is provided which when combined with the recycle gas provides a pyrolysis gas for treatment of additional hydrogen-deficient carbonaceous material. The amount of steam used and the conditions within the water-gas shift reaction zone and gas separation zone are controlled to obtain a steady-state composition of pyrolysis gas which will comprise hydrogen as the principal constituent and a minor amount of carbon monoxide, steam and methane so that no external source of hydrogen is needed to supply the hydrogen requirements of the process. In accordance with a particularly preferred embodiment, conditions are controlled such that there also is produced a significant quantity of benzene as a valuable coproduct.

  12. Automated high-throughput flow-through real-time diagnostic system

    DOE Patents [OSTI]

    Regan, John Frederick

    2012-10-30

    An automated real-time flow-through system capable of processing multiple samples in an asynchronous, simultaneous, and parallel fashion for nucleic acid extraction and purification, followed by assay assembly, genetic amplification, multiplex detection, analysis, and decontamination. The system is able to hold and access an unlimited number of fluorescent reagents that may be used to screen samples for the presence of specific sequences. The apparatus works by associating extracted and purified sample with a series of reagent plugs that have been formed in a flow channel and delivered to a flow-through real-time amplification detector that has a multiplicity of optical windows, to which the sample-reagent plugs are placed in an operative position. The diagnostic apparatus includes sample multi-position valves, a master sample multi-position valve, a master reagent multi-position valve, reagent multi-position valves, and an optical amplification/detection system.

  13. Steps to Establish a Real-Time Transmission Monitoring System...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Finally, this report acknowledges that a feasibility determination is necessary prior to any action to implement a real-time monitoring system and that the implementation of such a ...

  14. DOE - Fossil Energy: The Cleanest Coal Technology - A Real Gas

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5-Cleanest Coal Technology An Energy Lesson Cleaning Up Coal The Cleanest Coal Technology - a Real Gas Don't think of coal as a solid black rock. Think of it as a mass of atoms. ...

  15. New Real-Time Quantum Efficiency Measurement System: Preprint

    SciTech Connect (OSTI)

    Young, D. L.; Egaas, B.; Pinegar, S.; Stradins, P.

    2008-05-01

    This paper describes a newly developed technique for measuring the quantum eficiiency in solar cells in real-time using a unique, electronically controlled, full-spectrum light source.

  16. Looking at Transistor Gate Oxide Formation in Real Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Looking at Transistor Gate Oxide Formation in Real Time Print The oxide gate layer is critical to every transistor, and present-day layer thicknesses are in the 10-20 range (1-2...

  17. GATEWAY Demonstrations: Exploring SSL Product Performance in the Real World

    SciTech Connect (OSTI)

    2013-10-01

    Fact sheet that outlines DOE's GATEWAY technology demonstration program, which evaluates high-performance SSL products for general illumination in a variety of real-world exterior and interior applications.

  18. Towards Near Real-Time Availability With Enhanced Accuracy Turbo...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Turbo" ARSCL Towards Near Real-Time Availability With Enhanced Accuracy Turbo-ARSCL Project The goal is to speed delivery of the widely-used ARSCL product while improving the ...

  19. Workplace Charging Challenge Partner: El Camino Real Charter...

    Energy Savers [EERE]

    El Camino Real Charter High School (ECRCHS) has installed 4 plug-in electric vehicle (PEV) chargers, with plans to expand if demand increases. The charging stations play an ...

  20. Signal Processing, Analysis, & Display

    Energy Science and Technology Software Center (OSTI)

    1986-06-01

    SIG is a general-purpose signal processing, analysis, and display program. Its main purpose is to perform manipulations on time- and frequency-domain signals. However, it has been designed to ultimately accommodate other representations for data such as multiplexed signals and complex matrices. Two user interfaces are provided in SIG - a menu mode for the unfamiliar user and a command mode for more experienced users. In both modes errors are detected as early as possible andmore » are indicated by friendly, meaningful messages. An on-line HELP package is also included. A variety of operations can be performed on time- and frequency-domain signals including operations on the samples of a signal, operations on the entire signal, and operations on two or more signals. Signal processing operations that can be performed are digital filtering (median, Bessel, Butterworth, and Chebychev), ensemble average, resample, auto and cross spectral density, transfer function and impulse response, trend removal, convolution, Fourier transform and inverse window functions (Hamming, Kaiser-Bessel), simulation (ramp, sine, pulsetrain, random), and read/write signals. User definable signal processing algorithms are also featured. SIG has many options including multiple commands per line, command files with arguments,commenting lines, defining commands, and automatic execution for each item in a repeat sequence. Graphical operations on signals and spectra include: x-y plots of time signals; real, imaginary, magnitude, and phase plots of spectra; scaling of spectra for continuous or discrete domain; cursor zoom; families of curves; and multiple viewports.« less

  1. Ceramic Processing

    SciTech Connect (OSTI)

    EWSUK,KEVIN G.

    1999-11-24

    Ceramics represent a unique class of materials that are distinguished from common metals and plastics by their: (1) high hardness, stiffness, and good wear properties (i.e., abrasion resistance); (2) ability to withstand high temperatures (i.e., refractoriness); (3) chemical durability; and (4) electrical properties that allow them to be electrical insulators, semiconductors, or ionic conductors. Ceramics can be broken down into two general categories, traditional and advanced ceramics. Traditional ceramics include common household products such as clay pots, tiles, pipe, and bricks, porcelain china, sinks, and electrical insulators, and thermally insulating refractory bricks for ovens and fireplaces. Advanced ceramics, also referred to as ''high-tech'' ceramics, include products such as spark plug bodies, piston rings, catalyst supports, and water pump seals for automobiles, thermally insulating tiles for the space shuttle, sodium vapor lamp tubes in streetlights, and the capacitors, resistors, transducers, and varistors in the solid-state electronics we use daily. The major differences between traditional and advanced ceramics are in the processing tolerances and cost. Traditional ceramics are manufactured with inexpensive raw materials, are relatively tolerant of minor process deviations, and are relatively inexpensive. Advanced ceramics are typically made with more refined raw materials and processing to optimize a given property or combination of properties (e.g., mechanical, electrical, dielectric, optical, thermal, physical, and/or magnetic) for a given application. Advanced ceramics generally have improved performance and reliability over traditional ceramics, but are typically more expensive. Additionally, advanced ceramics are typically more sensitive to the chemical and physical defects present in the starting raw materials, or those that are introduced during manufacturing.

  2. Commercial Buildings Consortium

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    National Association of State Energy Officials ...owners, the commercial real estate community, financial ... * Milestone: create marketing and deployment plan for ...

  3. Driving Operational Changes through an Energy Monitoring System

    SciTech Connect (OSTI)

    2012-08-01

    Institutional change case study details IBM's corporate efficiency program focused on basic operation improvements in its diverse real estate operations.

  4. The Business Case for Sustainable Design in Federal Facilities

    SciTech Connect (OSTI)

    2003-08-01

    This document provides a better understanding of the Federal government's effort to build a more sustainable real estate portfolio.

  5. REAL-TIME TRACER MONITORING OF RESERVOIR STIMULATION PROCEDURES VIA ELECTRONIC WIRELINE AND TELEMETRY DATA TRANSMISSION

    SciTech Connect (OSTI)

    George L. Scott III

    2005-01-01

    Finalized Phase 2-3 project work has field-proven two separate real-time reservoir processes that were co-developed via funding by the National Energy Technology Laboratory (NETL). Both technologies are presently patented in the United States and select foreign markets; a downhole-commingled reservoir stimulation procedure and a real-time tracer-logged fracturing diagnostic system. Phase 2 and early Phase 3 project work included the research, development and well testing of a U.S. patented gamma tracer fracturing diagnostic system. This stimulation logging process was successfully field-demonstrated; real-time tracer measurement of fracture height while fracturing was accomplished and proven technically possible. However, after the initial well tests, there were several licensing issues that developed between service providers that restricted and minimized Realtimezone's (RTZ) ability to field-test the real-time gamma diagnostic system as was originally outlined for this project. Said restrictions were encountered after when one major provider agreed to license their gamma logging tools to another. Both of these companies previously promised contributory support toward Realtimezone's DE-FC26-99FT40129 project work, however, actual support was less than desired when newly-licensed wireline gamma logging tools from one company were converted by the other from electric wireline into slickline, batter-powered ''memory'' tools for post-stimulation logging purposes. Unfortunately, the converted post-fracture measurement memory tools have no applications in experimentally monitoring real-time movement of tracers in the reservoir concurrent with the fracturing treatment. RTZ subsequently worked with other tracer gamma-logging tool companies for basic gamma logging services, but with lessened results due to lack of multiple-isotope detection capability. In addition to real-time logging system development and well testing, final Phase 2 and Phase 3 project work included the

  6. Real-Time Electrical Engineer | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Real-Time Electrical Engineer Real-Time Electrical Engineer Submitted by admin on Mon, 2016-08-08 00:15 Job Summary Organization Name Department Of Energy Agency SubElement Western Area Power Administration Locations Loveland, Colorado Announcement Number WAPA-16-DE-241 Job Summary (See Frequently Asked Questions for more information). Where would I be working? Western Area Power Administration, Rocky Mountain Region, Power System Operations, Operations Support (J4200), 5555 E. Crossroads Blvd,

  7. DOE real property: A yearly statistical handbook, Fiscal year 1992

    SciTech Connect (OSTI)

    Not Available

    1992-12-31

    To assist in the tracking, reporting, and management of the real property, DOE has an automated inventory information system. This handbook was prepared as a resource for DOE officials and others who have a need to reference real property data as part of their day-to-day functions. It is intended as an internal working document, and the information therein is a compilation or analysis of data in the information system. It is divided into: land, buildings, and other structures and facilities.

  8. Illustrious Visitors Good Hosts Real Celebrity | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Illustrious Visitors Good Hosts Real Celebrity Illustrious Visitors; Good Hosts! Real Celebrity. June 15, 2015 On a regular basis, the DOE Site Office asks us to update our list of illustrious visitors; often, there is nothing to say. Other times we are inundated. The past few months has seen a fine selection of events hosted by Jefferson Lab, and Jefferson Science Associates and its parent Southeastern Universities Research Association. This past week, Joachim Mnich, a member of the DESY

  9. High speed, real-time, camera bandwidth converter

    DOE Patents [OSTI]

    Bower, Dan E; Bloom, David A; Curry, James R

    2014-10-21

    Image data from a CMOS sensor with 10 bit resolution is reformatted in real time to allow the data to stream through communications equipment that is designed to transport data with 8 bit resolution. The incoming image data has 10 bit resolution. The communication equipment can transport image data with 8 bit resolution. Image data with 10 bit resolution is transmitted in real-time, without a frame delay, through the communication equipment by reformatting the image data.

  10. Real-Time Chemical Imaging of Bacterial Biofilm Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Real-Time Chemical Imaging of Bacterial Biofilm Development Real-Time Chemical Imaging of Bacterial Biofilm Development Print Wednesday, 25 August 2010 00:00 Scientists have developed a robust and label-free method to probe the chemical underpinnings of developing bacterial biofilms. Almost all bacteria can form biofilms-dynamic communities of cells enclosed in self-produced matrices of polymers that stick to other bacteria or surfaces in water-containing environments. Coordinated collectively,

  11. Model Simulating Real Domestic Hot Water Use - Building America Top

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Innovation | Department of Energy Model Simulating Real Domestic Hot Water Use - Building America Top Innovation Model Simulating Real Domestic Hot Water Use - Building America Top Innovation Image of a pipe insulation.jpg As progress continues with high-R, tightly sealed thermal enclosures, domestic hot water becomes an increasingly important energy use in high-performance homes. This Top Innovation describes Building America research by Alliance for Residential Building Innovation and the

  12. Real-time alkali monitoring system

    DOE Patents [OSTI]

    Goff, David R.; Romanosky, Robert R.; Hensel, Peter

    1990-01-01

    A fiber optics based optical emission line monitoring system is provided in which selected spectral emission lines, such as the sodium emission line, may be detected in the presence of interfering background radiation. A combustion flame is fed by a diverted portion of a process stream and the common end of a bifurcated or quadfurcated fiber optic light guide is adapted to collect light from the flame. The light is guided through the branches of the fiber optic cable to bandpass filters, one of which is adapted to each of the branches of the fiber optic light guide. The bandpass filters are centered at wavelengths corresponding to the emission lines to be detected and two separate filters are required for each species being detected. The first filter has a bandwidth of about 3 nms and the second filter has a bandwidth of about 10 nms. Light detectors are located to view the light passing through the bandpass filters and amplifiers are connected to receive signals from the light detectors. The amplifier corresponding to the bandpass filter having the narrower bandwidth is preset to scale the signal by a factor equal to the ratio of the wide and narrow bandwidths of the bandpass filters. This scaling produces a scaled signal from which the difference between the scaled signal on the other signal can be calculated to produce a signal having an amplitude directly proportional to the concentration of the species of interest and independent of background radiation.

  13. An MBE growth facility for real-time in situ synchrotron x-ray topography studies of strained-layer III--V epitaxial materials

    SciTech Connect (OSTI)

    Whitehouse, C.R.; Barnett, S.J.; Soley, D.E.J.; Quarrell, J.; Aldridge, S.J.; Cullis, A.G.; Emeny, M.T.; Johnson, A.D. , St. Andrews Road, Malvern, Worcs WR14 3PS ); Clarke, G.F.; Lamb, W. ); Tanner, B.K.; Cottrell, S. ); Lunn, B.; Hogg, C.; Hagston, W. )

    1992-01-01

    This paper describes a unique combined UHV MBE growth x-ray topography facility designed to allow the first real-time synchrotron radiation x-ray topography study of strained-layer III--V growth processes. This system will enable unambiguous determination of dislocation nucleation and multiplication processes as a function of controlled variations in growth conditions, and also during post-growth thermal processing. The planned experiments have placed very stringent demands upon the engineering design of the system, and design details regarding the growth chamber; sample manipulator, x-ray optics, and real-time imaging systems are described. Results obtained during a feasibility study are also presented.

  14. Analysis of real-time reservoir monitoring : reservoirs, strategies, & modeling.

    SciTech Connect (OSTI)

    Mani, Seethambal S.; van Bloemen Waanders, Bart Gustaaf; Cooper, Scott Patrick; Jakaboski, Blake Elaine; Normann, Randy Allen; Jennings, Jim; Gilbert, Bob; Lake, Larry W.; Weiss, Chester Joseph; Lorenz, John Clay; Elbring, Gregory Jay; Wheeler, Mary Fanett; Thomas, Sunil G.; Rightley, Michael J.; Rodriguez, Adolfo; Klie, Hector; Banchs, Rafael; Nunez, Emilio J.; Jablonowski, Chris

    2006-11-01

    The project objective was to detail better ways to assess and exploit intelligent oil and gas field information through improved modeling, sensor technology, and process control to increase ultimate recovery of domestic hydrocarbons. To meet this objective we investigated the use of permanent downhole sensors systems (Smart Wells) whose data is fed real-time into computational reservoir models that are integrated with optimized production control systems. The project utilized a three-pronged approach (1) a value of information analysis to address the economic advantages, (2) reservoir simulation modeling and control optimization to prove the capability, and (3) evaluation of new generation sensor packaging to survive the borehole environment for long periods of time. The Value of Information (VOI) decision tree method was developed and used to assess the economic advantage of using the proposed technology; the VOI demonstrated the increased subsurface resolution through additional sensor data. Our findings show that the VOI studies are a practical means of ascertaining the value associated with a technology, in this case application of sensors to production. The procedure acknowledges the uncertainty in predictions but nevertheless assigns monetary value to the predictions. The best aspect of the procedure is that it builds consensus within interdisciplinary teams The reservoir simulation and modeling aspect of the project was developed to show the capability of exploiting sensor information both for reservoir characterization and to optimize control of the production system. Our findings indicate history matching is improved as more information is added to the objective function, clearly indicating that sensor information can help in reducing the uncertainty associated with reservoir characterization. Additional findings and approaches used are described in detail within the report. The next generation sensors aspect of the project evaluated sensors and packaging

  15. Oligomerization process

    DOE Patents [OSTI]

    Smith, Jr., Lawrence A. (Bellaire, TX); hearn, Dennis (Houston, TX); Jones, Jr., Edward M. (Friendswood, TX)

    1991-01-01

    A liquid phase process for oligomerization of C.sub.4 and C.sub.5 isoolefins or the etherification thereof with C.sub.1 to C.sub.6 alcohols wherein the reactants are contacted in a reactor with a fixed bed acid cation exchange resin catalyst at an LHSV of 5 to 20, pressure of 0 to 400 psig and temperature of 120 to 300.degree. F. wherein the improvement is the operation of the reactor at a pressure to maintain the reaction mixture at its boiling point whereby at least a portion but less than all of the reaction mixture is vaporized. By operating at the boiling point and allowing a portion of the reaction mixture to vaporize, the exothermic heat of reaction is dissipated by the formation of more boil up and the temperature in the reactor is controlled.

  16. Etherification process

    DOE Patents [OSTI]

    Smith, Jr., Lawrence A. (Houston, TX); Hearn, Dennis (Houston, TX); Jones, Jr., Edward M. (Friendswood, TX)

    1990-01-01

    A liquid phase process for oligomerization of C.sub.4 and C.sub.5 isoolefins or the etherification thereof with C.sub.1 to C.sub.6 alcohols wherein the reactants are contacted in a reactor with a fixed bed acid cation exchange resin catalyst at an LHSV of 5 to 20, pressure of 0 to 400 psig and temperature of 120.degree. to 300.degree. F. wherein the improvement is the operation of the reactor at a pressure to maintain the reaction mixture at its boiling point whereby at least a portion but less than all of the reaction mixture is vaporized. By operating at the boiling point and allowing a portion of the reaction mixture to vaporize, the exothermic heat of reaction is dissipated by the formation of more boil up and the temperature in the reactor is controlled.

  17. Crystallization process

    SciTech Connect (OSTI)

    Adler, Robert J.; Brown, William R.; Auyang, Lun; Liu, Yin-Chang; Cook, W. Jeffrey

    1986-01-01

    An improved crystallization process is disclosed for separating a crystallizable material and an excluded material which is at least partially excluded from the solid phase of the crystallizable material obtained upon freezing a liquid phase of the materials. The solid phase is more dense than the liquid phase, and it is separated therefrom by relative movement with the formation of a packed bed of solid phase. The packed bed is continuously formed adjacent its lower end and passed from the liquid phase into a countercurrent flow of backwash liquid. The packed bed extends through the level of the backwash liquid to provide a drained bed of solid phase adjacent its upper end which is melted by a condensing vapor.

  18. WELDING PROCESS

    DOE Patents [OSTI]

    Zambrow, J.; Hausner, H.

    1957-09-24

    A method of joining metal parts for the preparation of relatively long, thin fuel element cores of uranium or alloys thereof for nuclear reactors is described. The process includes the steps of cleaning the surfaces to be jointed, placing the sunfaces together, and providing between and in contact with them, a layer of a compound in finely divided form that is decomposable to metal by heat. The fuel element members are then heated at the contact zone and maintained under pressure during the heating to decompose the compound to metal and sinter the members and reduced metal together producing a weld. The preferred class of decomposable compounds are the metal hydrides such as uranium hydride, which release hydrogen thus providing a reducing atmosphere in the vicinity of the welding operation.

  19. Etherification process

    DOE Patents [OSTI]

    Smith, L.A. Jr.; Hearn, D.; Jones, E.M. Jr.

    1990-08-21

    A liquid phase process is described for oligomerization of C[sub 4] and C[sub 5] isoolefins or the etherification thereof with C[sub 1] to C[sub 6] alcohols wherein the reactants are contacted in a reactor with a fixed bed acid cation exchange resin catalyst at an LHSV of 5 to 20, pressure of 0 to 400 psig and temperature of 120 to 300 F wherein the improvement is the operation of the reactor at a pressure to maintain the reaction mixture at its boiling point whereby at least a portion but less than all of the reaction mixture is vaporized. By operating at the boiling point and allowing a portion of the reaction mixture to vaporize, the exothermic heat of reaction is dissipated by the formation of more boil up and the temperature in the reactor is controlled. 2 figs.

  20. Oligomerization process

    DOE Patents [OSTI]

    Smith, L.A. Jr.; Hearn, D.; Jones, E.M. Jr.

    1991-03-26

    A liquid phase process is described for oligomerization of C[sub 4] and C[sub 5] isoolefins or the etherification thereof with C[sub 1] to C[sub 6] alcohols wherein the reactants are contacted in a reactor with a fixed bed acid cation exchange resin catalyst at an LHSV of 5 to 20, pressure of 0 to 400 psig and temperature of 120 to 300 F wherein the improvement is the operation of the reactor at a pressure to maintain the reaction mixture at its boiling point whereby at least a portion but less than all of the reaction mixture is vaporized. By operating at the boiling point and allowing a portion of the reaction mixture to vaporize, the exothermic heat of reaction is dissipated by the formation of more boil up and the temperature in the reactor is controlled. 2 figures.

  1. Table of Contents for Desk Guide

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    May, 2013 U. S. Department of Energy - Real Estate Desk Guide Revised 2013 Real Estate Desk Guide Table of Contents Chapter 1-- Purpose of Desk Guide ........................................................................ 1 Chapter 2-- Introduction ......................................................................................... 3 Chapter 3-- Planning Policy .................................................................................... 7 Chapter 4-- Real Estate Function

  2. Real World Demonstration of a New American Low-Head Hydropower...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Real World Demonstration of a New American Low-Head Hydropower Unit Real World Demonstration of a New American Low-Head Hydropower Unit Real World Demonstration of a New American ...

  3. Corrective Measures Process

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Corrective Measures Process Corrective Measures Process We follow a stringent corrective measures process for legacy cleanup. August 1, 2013 Corrective measures process Corrective measures process

  4. Real-time Feynman path integral with Picard–Lefschetz theory and its applications to quantum tunneling

    SciTech Connect (OSTI)

    Tanizaki, Yuya; Koike, Takayuki

    2014-12-15

    Picard–Lefschetz theory is applied to path integrals of quantum mechanics, in order to compute real-time dynamics directly. After discussing basic properties of real-time path integrals on Lefschetz thimbles, we demonstrate its computational method in a concrete way by solving three simple examples of quantum mechanics. It is applied to quantum mechanics of a double-well potential, and quantum tunneling is discussed. We identify all of the complex saddle points of the classical action, and their properties are discussed in detail. However a big theoretical difficulty turns out to appear in rewriting the original path integral into a sum of path integrals on Lefschetz thimbles. We discuss generality of that problem and mention its importance. Real-time tunneling processes are shown to be described by those complex saddle points, and thus semi-classical description of real-time quantum tunneling becomes possible on solid ground if we could solve that problem. - Highlights: • Real-time path integral is studied based on Picard–Lefschetz theory. • Lucid demonstration is given through simple examples of quantum mechanics. • This technique is applied to quantum mechanics of the double-well potential. • Difficulty for practical applications is revealed, and we discuss its generality. • Quantum tunneling is shown to be closely related to complex classical solutions.

  5. Survey of systolic arrays for signal processing

    SciTech Connect (OSTI)

    Speiser, J.M.; Whitehouse, H.J.

    1983-01-01

    This paper reviews the major computational requirements for modern signal processing and surveys recent progress in parallel processing algorithms and architectures for their real-time implementation. The five matrix operations listed may be computed noniteratively, and systolic array architectures and algorithms are available which provide modular parallelism. Parallel computation of eigensystems, generalized eigensystems, the singular value decomposition, and the generalized singular value decomposition is more difficult, since the computation is necessarily iterative, and it is difficult to utilize only local communication between processing elements while maintaining high efficiency. Algorithms for the latter problems are therefore still the subject of intensive research. 33 references.

  6. GAO-12-645, Federal Real Property, National Strategy and Better...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2-645, Federal Real Property, National Strategy and Better Data Needed to Improve Management of Excess and Underutilized Property GAO-12-645, Federal Real Property, National...

  7. Real-time sub- Å ngstrom imaging of reversible and irreversible...

    Office of Scientific and Technical Information (OSTI)

    Real-time sub- ngstrom imaging of reversible and irreversible conformations in rhodium catalysts and graphene Title: Real-time sub- ngstrom imaging of reversible and ...

  8. Sci—Thur PM: Planning and Delivery — 06: Real-Time Interactive Treatment Planning

    SciTech Connect (OSTI)

    Matthews, Q; Mestrovic, A; Otto, K

    2014-08-15

    Purpose: To describe and evaluate a novel system for generalized Real-Time Interactive Planning (RTIP) applied to head and neck (H and N) VMAT. Methods: The clinician interactively manipulates dose distributions using DVHs, isodoses, or rate of dose fall-off, which may be subjected to user-defined constraints. Dose is calculated using a fast Achievable Dose Estimate (ADE) algorithm, which simulates the limits of what can be achieved during treatment. After each manipulation contributing fluence elements are modified and the dose distribution updates in effectively real-time. For H and N VMAT planning, structure sets for 11 patients were imported into RTIP. Each dose distribution was interactively modified to minimize OAR dose while constraining target DVHs. The resulting RTIP DVHs were transferred to the Eclipse™ VMAT optimizer, and conventional VMAT optimization was performed. Results: Dose calculation and update times for the ADE algorithm ranged from 2.4 to 22.6 milliseconds, thus facilitating effectively real-time manipulation of dose distributions. For each of the 11 H and N VMAT cases, the RTIP process took ∼2–10 minutes. All RTIP plans exhibited acceptable PTV coverage, mean dose, and max dose. 10 of 11 RTIP plans achieved substantially improved sparing of one or more OARs without compromising dose to targets or other OARs. Importantly, 10 of the 11 RTIP plans required only one or two post-RTIP optimizations. Conclusions: RTIP is a novel system for manipulating and updating achievable dose distributions in real-time. H and N VMAT plans generated using RTIP demonstrate improved OAR sparing and planning efficiency. Disclosures: One author has a commercial interest in the presented materials.

  9. Integrated real-time fracture-diagnostics instrumentation system

    SciTech Connect (OSTI)

    Engi, D

    1983-01-01

    The use of an integrated, real-time fracture-diagnostics instrumentation system for the control of the fracturing treatment during massive hydraulic fracturing is proposed. The proposed system consists of four subsystems: an internal-fracture-pressure measurement system, a fluid-flow measurement system, a borehole seismic system, and a surface-electric-potential measurement system. This use of borehole seismic and surface-electric-potential measurements, which are essentially away-from-the-wellbore measurements, in conjunction with the use of the more commonly used types of measurements, i.e., at-the-wellbore pressure and fluid-flow measurements, is a distinctive feature of the composite real-time diagnostics system. Currently, the real-time capabilities of the individual subsystems are being developed, and the problems associated with their integration into a complete, computer-linked instrumentation system are being addressed. 2 figures.

  10. Parallel processing for control applications

    SciTech Connect (OSTI)

    Telford, J. W.

    2001-01-01

    Parallel processing has been a topic of discussion in computer science circles for decades. Using more than one single computer to control a process has many advantages that compensate for the additional cost. Initially multiple computers were used to attain higher speeds. A single cpu could not perform all of the operations necessary for real time operation. As technology progressed and cpu's became faster, the speed issue became less significant. The additional processing capabilities however continue to make high speeds an attractive element of parallel processing. Another reason for multiple processors is reliability. For the purpose of this discussion, reliability and robustness will be the focal paint. Most contemporary conceptions of parallel processing include visions of hundreds of single computers networked to provide 'computing power'. Indeed our own teraflop machines are built from large numbers of computers configured in a network (and thus limited by the network). There are many approaches to parallel configfirations and this presentation offers something slightly different from the contemporary networked model. In the world of embedded computers, which is a pervasive force in contemporary computer controls, there are many single chip computers available. If one backs away from the PC based parallel computing model and considers the possibilities of a parallel control device based on multiple single chip computers, a new area of possibilities becomes apparent. This study will look at the use of multiple single chip computers in a parallel configuration with emphasis placed on maximum reliability.

  11. A real two-phase submarine debris flow and tsunami

    SciTech Connect (OSTI)

    Pudasaini, Shiva P.; Miller, Stephen A.

    2012-09-26

    The general two-phase debris flow model proposed by Pudasaini is employed to study subaerial and submarine debris flows, and the tsunami generated by the debris impact at lakes and oceans. The model, which includes three fundamentally new and dominant physical aspects such as enhanced viscous stress, virtual mass, and generalized drag (in addition to buoyancy), constitutes the most generalized two-phase flow model to date. The advantage of this two-phase debris flow model over classical single-phase, or quasi-two-phase models, is that the initial mass can be divided into several parts by appropriately considering the solid volume fraction. These parts include a dry (landslide or rock slide), a fluid (water or muddy water; e.g., dams, rivers), and a general debris mixture material as needed in real flow simulations. This innovative formulation provides an opportunity, within a single framework, to simultaneously simulate the sliding debris (or landslide), the water lake or ocean, the debris impact at the lake or ocean, the tsunami generation and propagation, the mixing and separation between the solid and fluid phases, and the sediment transport and deposition process in the bathymetric surface. Applications of this model include (a) sediment transport on hill slopes, river streams, hydraulic channels (e.g., hydropower dams and plants); lakes, fjords, coastal lines, and aquatic ecology; and (b) submarine debris impact and the rupture of fiber optic, submarine cables and pipelines along the ocean floor, and damage to offshore drilling platforms. Numerical simulations reveal that the dynamics of debris impact induced tsunamis in mountain lakes or oceans are fundamentally different than the tsunami generated by pure rock avalanches and landslides. The analysis includes the generation, amplification and propagation of super tsunami waves and run-ups along coastlines, debris slide and deposition at the bottom floor, and debris shock waves. It is observed that the

  12. Real-Time Active Cosmic Neutron Background Reduction Methods

    SciTech Connect (OSTI)

    Mukhopadhyay, Sanjoy; Maurer, Richard; Wolff, Ronald; Mitchell, Stephen; Guss, Paul

    2013-09-01

    Neutron counting using large arrays of pressurized 3He proportional counters from an aerial system or in a maritime environment suffers from the background counts from the primary cosmic neutrons and secondary neutrons caused by cosmic ray-induced mechanisms like spallation and charge-exchange reaction. This paper reports the work performed at the Remote Sensing Laboratory–Andrews (RSL-A) and results obtained when using two different methods to reduce the cosmic neutron background in real time. Both methods used shielding materials with a high concentration (up to 30% by weight) of neutron-absorbing materials, such as natural boron, to remove the low-energy neutron flux from the cosmic background as the first step of the background reduction process. Our first method was to design, prototype, and test an up-looking plastic scintillator (BC-400, manufactured by Saint Gobain Corporation) to tag the cosmic neutrons and then create a logic pulse of a fixed time duration (~120 μs) to block the data taken by the neutron counter (pressurized 3He tubes running in a proportional counter mode). The second method examined the time correlation between the arrival of two successive neutron signals to the counting array and calculated the excess of variance (Feynman variance Y2F)1 in the neutron count distribution from Poisson distribution. The dilution of this variance from cosmic background values ideally would signal the presence of man-made neutrons.2 The first method has been technically successful in tagging the neutrons in the cosmic-ray flux and preventing them from being counted in the 3He tube array by electronic veto—field measurement work shows the efficiency of the electronic veto counter to be about 87%. The second method has successfully derived an empirical relationship between the percentile non-cosmic component in a neutron flux and the Y2F of the measured neutron count distribution. By using shielding materials alone, approximately 55% of the neutron flux

  13. Optimal Real-time Dispatch for Integrated Energy Systems

    SciTech Connect (OSTI)

    Firestone, Ryan Michael

    2007-05-31

    This report describes the development and application of a dispatch optimization algorithm for integrated energy systems (IES) comprised of on-site cogeneration of heat and electricity, energy storage devices, and demand response opportunities. This work is intended to aid commercial and industrial sites in making use of modern computing power and optimization algorithms to make informed, near-optimal decisions under significant uncertainty and complex objective functions. The optimization algorithm uses a finite set of randomly generated future scenarios to approximate the true, stochastic future; constraints are included that prevent solutions to this approximate problem from deviating from solutions to the actual problem. The algorithm is then expressed as a mixed integer linear program, to which a powerful commercial solver is applied. A case study of United States Postal Service Processing and Distribution Centers (P&DC) in four cities and under three different electricity tariff structures is conducted to (1) determine the added value of optimal control to a cogeneration system over current, heuristic control strategies; (2) determine the value of limited electric load curtailment opportunities, with and without cogeneration; and (3) determine the trade-off between least-cost and least-carbon operations of a cogeneration system. Key results for the P&DC sites studied include (1) in locations where the average electricity and natural gas prices suggest a marginally profitable cogeneration system, optimal control can add up to 67% to the value of the cogeneration system; optimal control adds less value in locations where cogeneration is more clearly profitable; (2) optimal control under real-time pricing is (a) more complicated than under typical time-of-use tariffs and (b) at times necessary to make cogeneration economic at all; (3) limited electric load curtailment opportunities can be more valuable as a compliment to the cogeneration system than alone; and

  14. Real Time Quantitative Radiological Monitoring Equipment for Environmental Assessment

    SciTech Connect (OSTI)

    John R. Giles; Lyle G. Roybal; Michael V. Carpenter

    2006-03-01

    The Idaho National Laboratory (INL) has developed a suite of systems that rapidly scan, analyze, and characterize radiological contamination in soil. These systems have been successfully deployed at several Department of Energy (DOE) laboratories and Cold War Legacy closure sites. Traditionally, these systems have been used during the characterization and remediation of radiologically contaminated soils and surfaces; however, subsequent to the terrorist attacks of September 11, 2001, the applications of these systems have expanded to include homeland security operations for first response, continuing assessment and verification of cleanup activities in the event of the detonation of a radiological dispersal device. The core system components are a detector, a spectral analyzer, and a global positioning system (GPS). The system is computer controlled by menu-driven, user-friendly custom software designed for a technician-level operator. A wide variety of detectors have been used including several configurations of sodium iodide (NaI) and high-purity germanium (HPGe) detectors, and a large area proportional counter designed for the detection of x-rays from actinides such as Am-241 and Pu-238. Systems have been deployed from several platforms including a small all-terrain vehicle (ATV), hand-pushed carts, a backpack mounted unit, and an excavator mounted unit used where personnel safety considerations are paramount. The INL has advanced this concept, and expanded the system functionality to create an integrated, field-deployed analytical system through the use of tailored analysis and operations software. Customized, site specific software is assembled from a supporting toolbox of algorithms that streamline the data acquisition, analysis and reporting process. These algorithms include region specific spectral stripping, automated energy calibration, background subtraction, activity calculations based on measured detector efficiencies, and on-line data quality checks

  15. A heterogeneous hierarchical architecture for real-time computing

    SciTech Connect (OSTI)

    Skroch, D.A.; Fornaro, R.J.

    1988-12-01

    The need for high-speed data acquisition and control algorithms has prompted continued research in the area of multiprocessor systems and related programming techniques. The result presented here is a unique hardware and software architecture for high-speed real-time computer systems. The implementation of a prototype of this architecture has required the integration of architecture, operating systems and programming languages into a cohesive unit. This report describes a Heterogeneous Hierarchial Architecture for Real-Time (H{sup 2} ART) and system software for program loading and interprocessor communication.

  16. Integration of Real-Time Data Into Building Automation Systems

    SciTech Connect (OSTI)

    Mark J. Stunder; Perry Sebastian; Brenda A. Chube; Michael D. Koontz

    2003-04-16

    The project goal was to investigate the possibility of using predictive real-time information from the Internet as an input to building management system algorithms. The objectives were to identify the types of information most valuable to commercial and residential building owners, managers, and system designers. To comprehensively investigate and document currently available electronic real-time information suitable for use in building management systems. Verify the reliability of the information and recommend accreditation methods for data and providers. Assess methodologies to automatically retrieve and utilize the information. Characterize equipment required to implement automated integration. Demonstrate the feasibility and benefits of using the information in building management systems. Identify evolutionary control strategies.

  17. Handheld portable real-time tracking and communications device

    SciTech Connect (OSTI)

    Wiseman, James M.; Riblett, Jr., Loren E.; Green, Karl L.; Hunter, John A.; Cook, III, Robert N.; Stevens, James R.

    2012-05-22

    Portable handheld real-time tracking and communications devices include; a controller module, communications module including global positioning and mesh network radio module, data transfer and storage module, and a user interface module enclosed in a water-resistant enclosure. Real-time tracking and communications devices can be used by protective force, security and first responder personnel to provide situational awareness allowing for enhance coordination and effectiveness in rapid response situations. Such devices communicate to other authorized devices via mobile ad-hoc wireless networks, and do not require fixed infrastructure for their operation.

  18. Real-Time Traffic Information for Emergency Evacuation Operations: Phase A Final Report

    SciTech Connect (OSTI)

    Franzese, Oscar; Zhang, Li; Mahmoud, Anas M.; Lascurain, Mary Beth; Wen, Yi

    2010-05-01

    There are many instances in which it is possible to plan ahead for an emergency evacuation (e.g., an explosion at a chemical processing facility). For those cases, if an accident (or an attack) were to happen, then the best evacuation plan for the prevailing network and weather conditions would be deployed. In other cases (e.g., the derailment of a train transporting hazardous materials), there may not be any previously developed plan to be implemented and decisions must be made ad-hoc on how to proceed with an emergency evacuation. In both situations, the availability of real-time traffic information plays a critical role in the management of the evacuation operations. To improve public safety during a vehicular emergency evacuation it is necessary to detect losses of road capacity (due to incidents, for example) as early as possible. Once these bottlenecks are identified, re-routing strategies must be determined in real-time and deployed in the field to help dissipate the congestion and increase the efficiency of the evacuation. Due to cost constraints, only large urban areas have traffic sensor deployments that permit access to some sort of real-time traffic information; any evacuation taking place in any other areas of the country would have to proceed without real-time traffic information. The latter was the focus of this SERRI/DHS (Southeast Region Research Initiative/Department of Homeland Security) sponsored project. That is, the main objective on the project was to improve the operations during a vehicular emergency evacuation anywhere by using newly developed real-time traffic-information-gathering technologies to assess traffic conditions and therefore to potentially detect incidents on the main evacuation routes. Phase A of the project consisted in the development and testing of a prototype system composed of sensors that are engineered in such a way that they can be rapidly deployed in the field where and when they are needed. Each one of these sensors

  19. Cyber security analysis testbed : combining real, emulation, and simulation.

    SciTech Connect (OSTI)

    Villamarin, Charles H.; Eldridge, John M.; Van Leeuwen, Brian P.; Urias, Vincent E.

    2010-07-01

    Cyber security analysis tools are necessary to evaluate the security, reliability, and resilience of networked information systems against cyber attack. It is common practice in modern cyber security analysis to separately utilize real systems of computers, routers, switches, firewalls, computer emulations (e.g., virtual machines) and simulation models to analyze the interplay between cyber threats and safeguards. In contrast, Sandia National Laboratories has developed novel methods to combine these evaluation platforms into a hybrid testbed that combines real, emulated, and simulated components. The combination of real, emulated, and simulated components enables the analysis of security features and components of a networked information system. When performing cyber security analysis on a system of interest, it is critical to realistically represent the subject security components in high fidelity. In some experiments, the security component may be the actual hardware and software with all the surrounding components represented in simulation or with surrogate devices. Sandia National Laboratories has developed a cyber testbed that combines modeling and simulation capabilities with virtual machines and real devices to represent, in varying fidelity, secure networked information system architectures and devices. Using this capability, secure networked information system architectures can be represented in our testbed on a single, unified computing platform. This provides an 'experiment-in-a-box' capability. The result is rapidly-produced, large-scale, relatively low-cost, multi-fidelity representations of networked information systems. These representations enable analysts to quickly investigate cyber threats and test protection approaches and configurations.

  20. Corrective Measures Process

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Corrective Measures Process Corrective Measures Process We follow a stringent corrective measures process for legacy cleanup. August 1, 2013 Corrective measures process Corrective...

  1. Real-time graphic display utility for nuclear safety applications

    SciTech Connect (OSTI)

    Yang, S.; Huang, X.; Taylor, J.; Stevens, J.; Gerardis, T.; Hsu, A.; McCreary, T.

    2006-07-01

    With the increasing interests in the nuclear energy, new nuclear power plants will be constructed and licensed, and older generation ones will be upgraded for assuring continuing operation. The tendency of adopting the latest proven technology and the fact of older parts becoming obsolete have made the upgrades imperative. One of the areas for upgrades is the older CRT display being replaced by the latest graphics displays running under modern real time operating system (RTOS) with safety graded modern computer. HFC has developed a graphic display utility (GDU) under the QNX RTOS. A standard off-the-shelf software with a long history of performance in industrial applications, QNX RTOS used for safety applications has been examined via a commercial dedication process that is consistent with the regulatory guidelines. Through a commercial survey, a design life cycle and an operating history evaluation, and necessary tests dictated by the dedication plan, it is reasonably confirmed that the QNX RTOS was essentially equivalent to what would be expected in the nuclear industry. The developed GDU operates and communicates with the existing equipment through a dedicated serial channel of a flat panel controller (FPC) module. The FPC module drives a flat panel display (FPD) monitor. A touch screen mounted on the FPD serves as the normal operator interface with the FPC/FPD monitor system. The GDU can be used not only for replacing older CRTs but also in new applications. The replacement of the older CRT does not disturb the function of the existing equipment. It not only provides modern proven technology upgrade but also improves human ergonomics. The FPC, which can be used as a standalone controller running with the GDU, is an integrated hardware and software module. It operates as a single board computer within a control system, and applies primarily to the graphics display, targeting, keyboard and mouse. During normal system operation, the GDU has two sources of data

  2. ARM - VAP Process - mwrret

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    static Tb offsets are not applied. Additionally, if ARSCL (Active Remote Sensing of Cloud Layers) data is not available in real-time, cloud base height is determined from...

  3. Appliance and Equipment Standards Program Logic Model

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturers produce products with a high level of compliance that meet minimum energy conservation standards, resulting in energy savings in the buildings sector The Appliance & Equipment Standards Program promulgates energy conservation standards and test procedures in a rulemaking process to reduce energy consumption across residential, commercial, and industrial buildings. External Influences: DOE budget, Energy prices, Real estate market, Market incentives, Legislation / Regulation

  4. ADR Lunchtime Program: Addressing Unconscious Bias in the ADR Process |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Addressing Unconscious Bias in the ADR Process ADR Lunchtime Program: Addressing Unconscious Bias in the ADR Process This session focuses on strategies, issues, and insights into how unconscious bias impacts our perceptions, beliefs, and behaviors in today's workplace. Real-world case studies and current research are provided to increase awareness of the elements of the mediation/ADR process that may be impacted by biased communication and perception. The discussion

  5. Policy Flash 2005-53

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SUBJECT: Acquisition Guide Chapter 17.3, Acquisition, Use, and Disposal of Real Estate SUMMARY: The Acquisition Guide Chapter 17.3, Acquisition, Use, and Disposal of Real...

  6. U-042: Mac RealPlayer Multiple Vulnerabilities | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    42: Mac RealPlayer Multiple Vulnerabilities U-042: Mac RealPlayer Multiple Vulnerabilities November 21, 2011 - 9:15am Addthis PROBLEM: Mac RealPlayer Multiple Vulnerabilities. PLATFORM: Versions 12.0.0.1701 and prior. ABSTRACT: Multiple vulnerabilities have been reported in Mac RealPlayer, which can be exploited by malicious people to compromise a user's system. reference LINKS: Secunia Advisory: SA46963 Secunia Vulnerability Report: Mac RealPlayer 12.x Secunia Advisory: SA46954 IMPACT

  7. The first clinical treatment with kilovoltage intrafraction monitoring (KIM): A real-time image guidance method

    SciTech Connect (OSTI)

    Keall, Paul J. O’Brien, Ricky; Huang, Chen-Yu; Aun Ng, Jin; Colvill, Emma; Rugaard Poulsen, Per; Fledelius, Walther; Juneja, Prabhjot; Booth, Jeremy T.; Simpson, Emma; Bell, Linda; Alfieri, Florencia; Eade, Thomas; Kneebone, Andrew

    2015-01-15

    Purpose: Kilovoltage intrafraction monitoring (KIM) is a real-time image guidance method that uses widely available radiotherapy technology, i.e., a gantry-mounted x-ray imager. The authors report on the geometric and dosimetric results of the first patient treatment using KIM which occurred on September 16, 2014. Methods: KIM uses current and prior 2D x-ray images to estimate the 3D target position during cancer radiotherapy treatment delivery. KIM software was written to process kilovoltage (kV) images streamed from a standard C-arm linear accelerator with a gantry-mounted kV x-ray imaging system. A 120° pretreatment kV imaging arc was acquired to build the patient-specific 2D to 3D motion correlation. The kV imager was activated during the megavoltage (MV) treatment, a dual arc VMAT prostate treatment, to estimate the 3D prostate position in real-time. All necessary ethics, legal, and regulatory requirements were met for this clinical study. The quality assurance processes were completed and peer reviewed. Results: During treatment, a prostate position offset of nearly 3 mm in the posterior direction was observed with KIM. This position offset did not trigger a gating event. After the treatment, the prostate motion was independently measured using kV/MV triangulation, resulting in a mean difference of less than 0.6 mm and standard deviation of less than 0.6 mm in each direction. The accuracy of the marker segmentation was visually assessed during and after treatment and found to be performing well. During treatment, there were no interruptions due to performance of the KIM software. Conclusions: For the first time, KIM has been used for real-time image guidance during cancer radiotherapy. The measured accuracy and precision were both submillimeter for the first treatment fraction. This clinical translational research milestone paves the way for the broad implementation of real-time image guidance to facilitate the detection and correction of geometric and

  8. ATAC Process Proof of Concept Final Report

    SciTech Connect (OSTI)

    Bri Rolston; Sarah Freeman

    2014-03-01

    Researchers at INL with funding from the Department of Energy’s Office of Electricity Delivery and Energy Reliability (DOE-OE) evaluated a novel approach for near real-time consumption of threat intelligence. Demonstration testing in an industry environment supported the development of this new process to assist the electric sector in securing their critical networks. This report provides the reader with an understanding of the methods used during this proof of concept project. The processes and templates were further advanced with an industry partner during an onsite assessment. This report concludes with lessons learned and a roadmap for final development of these materials for use by industry.

  9. Well Placement Decision Process

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Well Placement Decision Process Well Placement Decision Process Determining where to place a well is a multi-step process. August 1, 2013 Investigation process for determining where to place a sentinel well Investigation process for determining where

  10. Monitoring and control of Urex radiochemical processes

    SciTech Connect (OSTI)

    Bryan, Samuel A.; Levitskaia, Tatiana G.

    2007-07-01

    There is urgent need for methods to provide on-line monitoring and control of the radiochemical processes that are currently being developed and demonstrated under the Global Nuclear Energy Partnership (GNEP) initiative. The methods used to monitor these processes must be robust (require little or no maintenance) and must be able to withstand harsh environments (e.g., high radiation fields and aggressive chemical matrices). The ability for continuous online monitoring allows the following benefits: - Accountability of the fissile materials; - Control of the process flowsheet; - Information on flow parameters, solution composition, and chemical speciation; - Enhanced performance by eliminating the need for traditional analytical 'grab samples'; - Improvement of operational and criticality safety; - Elimination of human error. The objective of our project is to use a system of flow, chemical composition, and physical property measurement techniques for developing on-line real-time monitoring systems for the UREX process streams. We will use our past experience in adapting and deploying Raman spectrometer combined with Coriolis meters and conductivity probes in developing a deployable prototype monitor for the UREX radiochemical streams. This system will be augmented with UV-vis-NIR spectrophotometer. Flow, temperature, density, and chemical composition and concentration measurements will be combined for real-time data analysis during processing. Currently emphasis of our research is placed on evaluation of the commercial instrumentation for the UREX flowsheet. (authors)

  11. Wide-area, real-time monitoring and visualization system

    DOE Patents [OSTI]

    Budhraja, Vikram S.; Dyer, James D.; Martinez Morales, Carlos A.

    2011-11-15

    A real-time performance monitoring system for monitoring an electric power grid. The electric power grid has a plurality of grid portions, each grid portion corresponding to one of a plurality of control areas. The real-time performance monitoring system includes a monitor computer for monitoring at least one of reliability metrics, generation metrics, transmission metrics, suppliers metrics, grid infrastructure security metrics, and markets metrics for the electric power grid. The data for metrics being monitored by the monitor computer are stored in a data base, and a visualization of the metrics is displayed on at least one display computer having a monitor. The at least one display computer in one said control area enables an operator to monitor the grid portion corresponding to a different said control area.

  12. Real time markerless motion tracking using linked kinematic chains

    DOE Patents [OSTI]

    Luck, Jason P.; Small, Daniel E.

    2007-08-14

    A markerless method is described for tracking the motion of subjects in a three dimensional environment using a model based on linked kinematic chains. The invention is suitable for tracking robotic, animal or human subjects in real-time using a single computer with inexpensive video equipment, and does not require the use of markers or specialized clothing. A simple model of rigid linked segments is constructed of the subject and tracked using three dimensional volumetric data collected by a multiple camera video imaging system. A physics based method is then used to compute forces to align the model with subsequent volumetric data sets in real-time. The method is able to handle occlusion of segments and accommodates joint limits, velocity constraints, and collision constraints and provides for error recovery. The method further provides for elimination of singularities in Jacobian based calculations, which has been problematic in alternative methods.

  13. Real-time multiplexed digital cavity-enhanced spectroscopy

    SciTech Connect (OSTI)

    Boyson, Toby K.; Dagdigian, Paul J.; Pavey, Karl D.; Fitzgerald, Nicholas J.; Spence, Thomas G.; Moore, David S.; Harb, Charles C.

    2015-10-01

    Cavity-enhanced spectroscopy is a sensitive optical absorption technique but one where the practical applications have been limited to studying small wavelength ranges. In addition, this Letter shows that wideband operation can be achieved by combining techniques usually reserved for the communications community with that of cavity-enhanced spectroscopy, producing a multiplexed real-time cavity-enhanced spectrometer. We use multiple collinear laser sources operating asynchronously and simultaneously while being detected on a single photodetector. This is synonymous with radio frequency (RF) cellular systems in which signals are detected on a single antenna but decoded uniquely. Here, we demonstrate results with spectra of methyl salicylate and show parts-per-billion per root hertz sensitivity measured in real-time.

  14. Real-time performance monitoring and management system

    DOE Patents [OSTI]

    Budhraja, Vikram S.; Dyer, James D.; Martinez Morales, Carlos A.

    2007-06-19

    A real-time performance monitoring system for monitoring an electric power grid. The electric power grid has a plurality of grid portions, each grid portion corresponding to one of a plurality of control areas. The real-time performance monitoring system includes a monitor computer for monitoring at least one of reliability metrics, generation metrics, transmission metrics, suppliers metrics, grid infrastructure security metrics, and markets metrics for the electric power grid. The data for metrics being monitored by the monitor computer are stored in a data base, and a visualization of the metrics is displayed on at least one display computer having a monitor. The at least one display computer in one said control area enables an operator to monitor the grid portion corresponding to a different said control area.

  15. Wide-area, real-time monitoring and visualization system

    DOE Patents [OSTI]

    Budhraja, Vikram S.; Dyer, James D.; Martinez Morales, Carlos A.

    2013-03-19

    A real-time performance monitoring system for monitoring an electric power grid. The electric power grid has a plurality of grid portions, each grid portion corresponding to one of a plurality of control areas. The real-time performance monitoring system includes a monitor computer for monitoring at least one of reliability metrics, generation metrics, transmission metrics, suppliers metrics, grid infrastructure security metrics, and markets metrics for the electric power grid. The data for metrics being monitored by the monitor computer are stored in a data base, and a visualization of the metrics is displayed on at least one display computer having a monitor. The at least one display computer in one said control area enables an operator to monitor the grid portion corresponding to a different said control area.

  16. Real-time multiplexed digital cavity-enhanced spectroscopy

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Boyson, Toby K.; Dagdigian, Paul J.; Pavey, Karl D.; Fitzgerald, Nicholas J.; Spence, Thomas G.; Moore, David S.; Harb, Charles C.

    2015-10-01

    Cavity-enhanced spectroscopy is a sensitive optical absorption technique but one where the practical applications have been limited to studying small wavelength ranges. In addition, this Letter shows that wideband operation can be achieved by combining techniques usually reserved for the communications community with that of cavity-enhanced spectroscopy, producing a multiplexed real-time cavity-enhanced spectrometer. We use multiple collinear laser sources operating asynchronously and simultaneously while being detected on a single photodetector. This is synonymous with radio frequency (RF) cellular systems in which signals are detected on a single antenna but decoded uniquely. Here, we demonstrate results with spectra of methyl salicylatemore » and show parts-per-billion per root hertz sensitivity measured in real-time.« less

  17. Development of Real-Time, Gas Quality Sensor Technology

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Real-Time, Gas Quality Sensor Technology Introduction Landfll gas (LFG), composed largely of methane and carbon dioxide, is used in over 645 operational projects in 48 states. These projects convert a large source of greenhouse gases into a fuel that currently provides approximately 51 trillion Btu of electricity and supplies 108 billion cubic feet of LFG annually to direct use applications and natural gas pipelines. However, there is still a signifcant resource base for new projects, with over

  18. Real-Time Chemical Imaging of Bacterial Biofilm Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Real-Time Chemical Imaging of Bacterial Biofilm Development Print Scientists have developed a robust and label-free method to probe the chemical underpinnings of developing bacterial biofilms. Almost all bacteria can form biofilms-dynamic communities of cells enclosed in self-produced matrices of polymers that stick to other bacteria or surfaces in water-containing environments. Coordinated collectively, these bacteria defend against antagonists, break down recalcitrant materials, and produce

  19. Real-Time Chemical Imaging of Bacterial Biofilm Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Real-Time Chemical Imaging of Bacterial Biofilm Development Print Scientists have developed a robust and label-free method to probe the chemical underpinnings of developing bacterial biofilms. Almost all bacteria can form biofilms-dynamic communities of cells enclosed in self-produced matrices of polymers that stick to other bacteria or surfaces in water-containing environments. Coordinated collectively, these bacteria defend against antagonists, break down recalcitrant materials, and produce

  20. Real-Time Chemical Imaging of Bacterial Biofilm Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Real-Time Chemical Imaging of Bacterial Biofilm Development Print Scientists have developed a robust and label-free method to probe the chemical underpinnings of developing bacterial biofilms. Almost all bacteria can form biofilms-dynamic communities of cells enclosed in self-produced matrices of polymers that stick to other bacteria or surfaces in water-containing environments. Coordinated collectively, these bacteria defend against antagonists, break down recalcitrant materials, and produce

  1. Real-Time Chemical Imaging of Bacterial Biofilm Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Real-Time Chemical Imaging of Bacterial Biofilm Development Print Scientists have developed a robust and label-free method to probe the chemical underpinnings of developing bacterial biofilms. Almost all bacteria can form biofilms-dynamic communities of cells enclosed in self-produced matrices of polymers that stick to other bacteria or surfaces in water-containing environments. Coordinated collectively, these bacteria defend against antagonists, break down recalcitrant materials, and produce

  2. Real-Time Chemical Imaging of Bacterial Biofilm Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Real-Time Chemical Imaging of Bacterial Biofilm Development Print Scientists have developed a robust and label-free method to probe the chemical underpinnings of developing bacterial biofilms. Almost all bacteria can form biofilms-dynamic communities of cells enclosed in self-produced matrices of polymers that stick to other bacteria or surfaces in water-containing environments. Coordinated collectively, these bacteria defend against antagonists, break down recalcitrant materials, and produce

  3. Real Space Mapping of Oxygen Vacancy Diffusion and Electrochemical

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Transformations by Hysteretic Current Reversal Curve Measurements - Energy Innovation Portal Hydrogen and Fuel Cell Hydrogen and Fuel Cell Energy Storage Energy Storage Find More Like This Return to Search Real Space Mapping of Oxygen Vacancy Diffusion and Electrochemical Transformations by Hysteretic Current Reversal Curve Measurements Oak Ridge National Laboratory Contact ORNL About This Technology Technology Marketing SummaryElectrochemical energy storage and conversion systems based on

  4. Real Time Diagnostics for Algae-final-sm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Real-time Monitoring And Diagnostics Detecting pathogens and predators to quickly recover from pond crashes Algal Pond Crash Detection Sandia National Laboratories is developing a suite of complementary technologies to help the emerging algae industry detect and quickly recover from algal pond crashes, an obstacle to large-scale algae cultivation for biofuels. Because of the way algae is grown and produced in most algal ponds, they are prone to attack by fungi, rotifers, viruses or other

  5. Real-Time Airborne Particle Analyzer - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Find More Like This Return to Search Real-Time Airborne Particle Analyzer Oak Ridge National Laboratory Contact ORNL About This Technology Technology Marketing Summary Particle analysis is useful for determining chemical compositions in a wide range of disciplines, from ascertaining the source of a petroleum sample to duplicating a fragrance. The technique is appealing to a broad cross section of analytical sciences, but its applications are limited because, for existing equipment, sample size

  6. Real-Time Chemical Imaging of Bacterial Biofilm Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Real-Time Chemical Imaging of Bacterial Biofilm Development Print Scientists have developed a robust and label-free method to probe the chemical underpinnings of developing bacterial biofilms. Almost all bacteria can form biofilms-dynamic communities of cells enclosed in self-produced matrices of polymers that stick to other bacteria or surfaces in water-containing environments. Coordinated collectively, these bacteria defend against antagonists, break down recalcitrant materials, and produce

  7. Real-Time Chemical Imaging of Bacterial Biofilm Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Real-Time Chemical Imaging of Bacterial Biofilm Development Print Scientists have developed a robust and label-free method to probe the chemical underpinnings of developing bacterial biofilms. Almost all bacteria can form biofilms-dynamic communities of cells enclosed in self-produced matrices of polymers that stick to other bacteria or surfaces in water-containing environments. Coordinated collectively, these bacteria defend against antagonists, break down recalcitrant materials, and produce

  8. Real-Time Chemical Imaging of Bacterial Biofilm Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Real-Time Chemical Imaging of Bacterial Biofilm Development Print Scientists have developed a robust and label-free method to probe the chemical underpinnings of developing bacterial biofilms. Almost all bacteria can form biofilms-dynamic communities of cells enclosed in self-produced matrices of polymers that stick to other bacteria or surfaces in water-containing environments. Coordinated collectively, these bacteria defend against antagonists, break down recalcitrant materials, and produce

  9. Building virtual connections, saving real money | Y-12 National Security

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Complex Building virtual ... Building virtual connections, saving real money Posted: August 29, 2016 - 10:34am Kia Moua (left) and Lee Bzorgi prepare for a video teleconference with aspiring roboticists at Northern Kentucky University. Y-12 is talking robotics with college students a state away. Through video teleconferencing, Y-12 is using its people and technological capabilities to reach out and (almost) touch aspiring roboticists at Northern Kentucky University, located just south of

  10. Comparing Climate Models to Real World Shows Differences in Precipitation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Intensity | U.S. DOE Office of Science (SC) Comparing Climate Models to Real World Shows Differences in Precipitation Intensity Biological and Environmental Research (BER) BER Home About Research Facilities Science Highlights Searchable Archive of BER Highlights External link Benefits of BER Funding Opportunities Biological & Environmental Research Advisory Committee (BERAC) Community Resources Contact Information Biological and Environmental Research U.S. Department of Energy

  11. Real-time Pricing Demand Response in Operations

    SciTech Connect (OSTI)

    Widergren, Steven E.; Marinovici, Maria C.; Berliner, Teri; Graves, Alan

    2012-07-26

    Abstract—Dynamic pricing schemes have been implemented in commercial and industrial application settings, and recently they are getting attention for application to residential customers. Time-of-use and critical-peak-pricing rates are in place in various regions and are being piloted in many more. These programs are proving themselves useful for balancing energy during peak periods; however, real-time (5 minute) pricing signals combined with automation in end-use systems have the potential to deliver even more benefits to operators and consumers. Besides system peak shaving, a real-time pricing system can contribute demand response based on the locational marginal price of electricity, reduce load in response to a generator outage, and respond to local distribution system capacity limiting situations. The US Department of Energy (DOE) is teaming with a mid-west electricity service provider to run a distribution feeder-based retail electricity market that negotiates with residential automation equipment and clears every 5 minutes, thus providing a signal for lowering or raising electric consumption based on operational objectives of economic efficiency and reliability. This paper outlines the capability of the real-time pricing system and the operational scenarios being tested as the system is rolled-out starting in the first half of 2012.

  12. Managing high-bandwidth real-time data storage

    SciTech Connect (OSTI)

    Bigelow, David D.; Brandt, Scott A; Bent, John M; Chen, Hsing-Bung

    2009-09-23

    There exist certain systems which generate real-time data at high bandwidth, but do not necessarily require the long-term retention of that data in normal conditions. In some cases, the data may not actually be useful, and in others, there may be too much data to permanently retain in long-term storage whether it is useful or not. However, certain portions of the data may be identified as being vitally important from time to time, and must therefore be retained for further analysis or permanent storage without interrupting the ongoing collection of new data. We have developed a system, Mahanaxar, intended to address this problem. It provides quality of service guarantees for incoming real-time data streams and simultaneous access to already-recorded data on a best-effort basis utilizing any spare bandwidth. It has built in mechanisms for reliability and indexing, can scale upwards to meet increasing bandwidth requirements, and handles both small and large data elements equally well. We will show that a prototype version of this system provides better performance than a flat file (traditional filesystem) based version, particularly with regard to quality of service guarantees and hard real-time requirements.

  13. Processing data base information having nonwhite noise

    DOE Patents [OSTI]

    Gross, Kenneth C.; Morreale, Patricia

    1995-01-01

    A method and system for processing a set of data from an industrial process and/or a sensor. The method and system can include processing data from either real or calculated data related to an industrial process variable. One of the data sets can be an artificial signal data set generated by an autoregressive moving average technique. After obtaining two data sets associated with one physical variable, a difference function data set is obtained by determining the arithmetic difference between the two pairs of data sets over time. A frequency domain transformation is made of the difference function data set to obtain Fourier modes describing a composite function data set. A residual function data set is obtained by subtracting the composite function data set from the difference function data set and the residual function data set (free of nonwhite noise) is analyzed by a statistical probability ratio test to provide a validated data base.

  14. Imaging gene expression in real-time using aptamers

    SciTech Connect (OSTI)

    Shin, Il Chung

    2011-01-01

    Signal transduction pathways are usually activated by external stimuli and are transient. The downstream changes such as transcription of the activated genes are also transient. Real-time detection of promoter activity is useful for understanding changes in gene expression, especially during cell differentiation and in development. A simple and reliable method for viewing gene expression in real time is not yet available. Reporter proteins such as fluorescent proteins and luciferase allow for non-invasive detection of the products of gene expression in living cells. However, current reporter systems do not provide for real-time imaging of promoter activity in living cells. This is because of the long time period after transcription required for fluorescent protein synthesis and maturation. We have developed an RNA reporter system for imaging in real-time to detect changes in promoter activity as they occur. The RNA reporter uses strings of RNA aptamers that constitute IMAGEtags (Intracellular MultiAptamer GEnetic tags), which can be expressed from a promoter of choice. The tobramycin, neomycin and PDC RNA aptamers have been utilized for this system and expressed in yeast from the GAL1 promoter. The IMAGEtag RNA kinetics were quantified by RT-qPCR. In yeast precultured in raffinose containing media the GAL1 promoter responded faster than in yeast precultured in glucose containing media. IMAGEtag RNA has relatively short half-life (5.5 min) in yeast. For imaging, the yeast cells are incubated with their ligands that are labeled with fluorescent dyes. To increase signal to noise, ligands have been separately conjugated with the FRET (Förster resonance energy transfer) pairs, Cy3 and Cy5. With these constructs, the transcribed aptamers can be imaged after activation of the promoter by galactose. FRET was confirmed with three different approaches, which were sensitized emission, acceptor photobleaching and donor lifetime by FLIM (fluorescence lifetime imaging

  15. Extensible packet processing architecture

    DOE Patents [OSTI]

    Robertson, Perry J.; Hamlet, Jason R.; Pierson, Lyndon G.; Olsberg, Ronald R.; Chun, Guy D.

    2013-08-20

    A technique for distributed packet processing includes sequentially passing packets associated with packet flows between a plurality of processing engines along a flow through data bus linking the plurality of processing engines in series. At least one packet within a given packet flow is marked by a given processing engine to signify by the given processing engine to the other processing engines that the given processing engine has claimed the given packet flow for processing. A processing function is applied to each of the packet flows within the processing engines and the processed packets are output on a time-shared, arbitered data bus coupled to the plurality of processing engines.

  16. A real-time heart rate analysis for a remote millimeter wave I-Q sensor.

    SciTech Connect (OSTI)

    Bakhtiari, S.; Liao, S.; Elmer, T.; Gopalsami, N.; Raptis, A. C.

    2011-06-01

    This paper analyzes heart rate (HR) information from physiological tracings collected with a remote millimeter wave (mmW) I-Q sensor for biometric monitoring applications. A parameter optimization method based on the nonlinear Levenberg-Marquardt algorithm is used. The mmW sensor works at 94 GHz and can detect the vital signs of a human subject from a few to tens of meters away. The reflected mmW signal is typically affected by respiration, body movement, background noise, and electronic system noise. Processing of the mmW radar signal is, thus, necessary to obtain the true HR. The down-converted received signal in this case consists of both the real part (I-branch) and the imaginary part (Q-branch), which can be considered as the cosine and sine of the received phase of the HR signal. Instead of fitting the converted phase angle signal, the method directly fits the real and imaginary parts of the HR signal, which circumvents the need for phase unwrapping. This is particularly useful when the SNR is low. Also, the method identifies both beat-to-beat HR and individual heartbeat magnitude, which is valuable for some medical diagnosis applications. The mean HR here is compared to that obtained using the discrete Fourier transform.

  17. Advances on multijunction solar cell characterization aimed at the optimization of real concentrator performance

    SciTech Connect (OSTI)

    Garcia-Linares, Pablo Dominguez, César Voarino, Philippe Besson, Pierre Baudrit, Mathieu

    2014-09-26

    Multijunction solar cells (MJSC) are usually developed to maximize efficiency under test conditions and not under real operation. This is the case of anti-reflective coatings (ARC), which are meant to minimize Fresnel reflection losses for a family of incident rays at room temperature. In order to understand and quantify the discrepancies between test and operation conditions, we have experimentally analyzed the spectral response of MJSC for a variety of incidence angles that are in practice received by a concentrator cell in high-concentration photovoltaic (HCPV) receiver designs. Moreover, we characterize this angular dependence as a function of temperature in order to reproduce real operation conditions. As the refractive index of the silicone is dependent on temperature, an optical mismatch is expected. Regarding other characterization techniques, a method called Relative EL Homogeneity Analysis (RELHA) is applied to processed wafers prior to dicing, allowing to diagnose the wafer crystalline homogeneity for each junction. Finally, current (I)-voltage (V) characterization under strongly unbalanced light spectra has also been carried out for a number of low-level irradiances, providing insight on each junction shunt resistance and corresponding radiative coupling.

  18. Technology survey for real-time monitoring of plutonium in a vitrifier off-gas system

    SciTech Connect (OSTI)

    Berg, J.M.; Veirs, D.K.

    1996-01-01

    We surveyed several promising measurement technologies for the real-time monitoring of plutonium in a vitrifier off-gas system. The vitrifier is being developed by Westinghouse Savannah River Corp. and will be used to demonstrate vitrification of plutonium dissolved in nitric acid for fissile material disposition. The risk of developing a criticality hazard in the off-gas processing equipment can be managed by using available measurement technologies. We identified several potential technologies and methods for detecting plutonium that are sensitive enough to detect the accumulation of a mass sufficient to form a criticality hazard. We recommend gross alpha-monitoring technologies as the most promising option for Westinghouse Savannah River Corp. to consider because that option appears to require the least additional development. We also recommend further consideration for several other technologies because they offer specific advantages and because gross alpha-monitoring could prove unsuitable when tested for this specific application.

  19. Real Time Optimizing Code for Stabilization and Control of Plasma Reactors

    Energy Science and Technology Software Center (OSTI)

    1995-09-25

    LOOP4 is a flexible real-time control code that acquires signals (input variables) from an array of sensors, that computes therefrom the actual state of the reactor system, that compares the actual state to the desired state (a goal), and that commands changes to reactor controls (output, or manipulated variables) in order to minimize the difference between the actual state of the reactor and the desired state. The difference between actual and desired states is quantifiedmore » in terms of a distance metric in the space defined by the sensor measurements. The desired state of the reactor is specified in terms of target values of sensor readings that were obtained previously during development and optimization of a process engineer using conventional techniques.« less

  20. In Situ Real-Time Radiographic Study of Thin Film Formation Inside Rotating Hollow Spheres

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Braun, Tom; Walton, Christopher C.; Dawedeit, Christoph; Biener, Monika M.; Kim, Sung Ho; Willey, Trevor M.; Xiao, Xianghui; van Buuren, Anthony; Hamza, Alex V.; Biener, Juergen

    2016-02-03

    The hollow spheres with uniform coatings on the inner surface have applications in optical devices, time- or site-controlled drug release, heat storage devices, and target fabrication for inertial confinement fusion experiments. The fabrication of uniform coatings, which is often critical for the application performance, requires precise understanding and control over the coating process and its parameters. We report on in situ real-time radiography experiments that provide critical spatiotemporal information about the distribution of fluids inside hollow spheres during uniaxial rotation. Furthermore, image analysis and computer fluid dynamics simulations were used to explore the effect of liquid viscosity and rotational velocitymore » on the film uniformity. The data were then used to demonstrate the fabrication of uniform sol–gel chemistry derived porous polymer films inside 2 mm inner diameter diamond shells.« less

  1. EEO Complaint Process EEO Complaint Process INFORMAL PROCESS-COUNSELING

    National Nuclear Security Administration (NNSA)

    EEO Complaint Process EEO Complaint Process INFORMAL PROCESS-COUNSELING National Nuclear Security Administration Office of Civil Rights Equal Employment Opportunity: Collaborating For Mission Success EEO POLICY The Department of Energy (DOE) does not discriminate on the basis of age, color, race, disability (physical or mental), national origin, reprisal, religion, sex (including sexual harassment), sexual orientation, genetic information or any other non-merit factor. DOE is committed to equal

  2. In-situ, Real-Time Monitoring of Mechanical and Chemical Structure...

    Office of Scientific and Technical Information (OSTI)

    Conference: In-situ, Real-Time Monitoring of Mechanical and Chemical Structure Changes in ... Citation Details In-Document Search Title: In-situ, Real-Time Monitoring of Mechanical and ...

  3. National Instruments Offers Real-Time Course on April 12 | Jefferson...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Instruments Offers Real-Time Linux, LabVIEW Real-Time and LabView FPGA Course at JLab on April 12 For those already using LabView and wanting to learn about embedded ...

  4. Field Evaluation of Real-time Cloud OD Sensor TWST during the...

    Office of Scientific and Technical Information (OSTI)

    Citation Details In-Document Search Title: Field Evaluation of Real-time Cloud OD Sensor ... performance of a real-time cloud optical depth (COD) sensor (dubbed three-waveband ...

  5. Microsoft Word - GRS Review_OMB White Paper - Real Property Right...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Microsoft Word - GRS ReviewOMB White Paper - Real Property Right-sizing and Carbon Reduction August 7 2009 2.docx PDF icon Microsoft Word - GRS ReviewOMB White Paper - Real ...

  6. High-Energy, Pulsed-Laser Diagnostics for Real-Time Measurements...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy, Pulsed-Laser Diagnostics for Real-Time Measurements of Reciprocating Engine PM Emissions High-Energy, Pulsed-Laser Diagnostics for Real-Time Measurements of Reciprocating ...

  7. Measuring "Real World" Heavy-Duty Diesel Emissions with a Mobile...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    "Real World" Heavy-Duty Diesel Emissions with a Mobile Lab Measuring "Real World" Heavy-Duty Diesel Emissions with a Mobile Lab 2002 DEER Conference Presentation: University of ...

  8. Real-World Greenhouse Gas Emissions from a MY2010 Diesel Truck...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Real-World Greenhouse Gas Emissions from a MY2010 Diesel Truck Traveling Across the Continental United States Real-World Greenhouse Gas Emissions from a MY2010 Diesel Truck ...

  9. Hubbard model corrections in real-space x-ray spectroscopy theory...

    Office of Scientific and Technical Information (OSTI)

    Hubbard model corrections in real-space x-ray spectroscopy theory Citation Details In-Document Search Title: Hubbard model corrections in real-space x-ray spectroscopy theory ...

  10. Is there a source of help for setting up real time wind turbine...

    Open Energy Info (EERE)

    Is there a source of help for setting up real time wind turbine data reporting ? Home I'd like our students to be able to see historical data as well as real time power generation...

  11. V-228: RealPlayer Buffer Overflow and Memory Corruption Error...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    V-228: RealPlayer Buffer Overflow and Memory Corruption Error Let Remote Users Execute ... Lets Remote Users Execute Arbitrary Code V-049: RealPlayer Buffer Overflow and Invalid ...

  12. V-049: RealPlayer Buffer Overflow and Invalid Pointer Flaw Let...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    V-049: RealPlayer Buffer Overflow and Invalid Pointer Flaw Let Remote Users Execute ... The vendor has issued a fix (16.0.0.282). Addthis Related Articles V-228: RealPlayer ...

  13. Joint Real-Time Energy and Demand-Response Management using a...

    Office of Scientific and Technical Information (OSTI)

    Real-Time Energy and Demand-Response Management using a Hybrid Coalitional-Noncooperative Game Citation Details In-Document Search Title: Joint Real-Time Energy and ...

  14. Case Study: The ''Office of Real Soon Now'' for Visualization

    SciTech Connect (OSTI)

    Uselton, S.P.

    2002-03-27

    A variation on the ''Office of Real Soon Now'' has been designed and deployed at Lawrence Livermore National Laboratory (LLNL). The ASCI VIEWS (VIEWS) program [1], the element of the program developing tools for data management and visualization, is investigating a variety of display technologies, motivated in part by the large size, high resolution, and complexity of data sets that ASCI users frequently explore and analyze. While large, tiled displays have been well received at LLNL, availability and ease-of-use problems have motivated exploration of alternatives [2]. The ''Office of Real Soon Now'' Project [3, 4, 5] at the University of North Carolina at Chapel Hill (UNC) has built ''low fidelity'' versions of the ''Office of the Future'' [6, 7] that can be installed in users' offices now. At UNC, the Office of Real Soon Now installations use only a small number of relatively inexpensive projectors,generally two or three, that limit resolution and features. These projectors are connected to Microsoft Windows PCs or Apple computers that are used for daily activities, such as reading email, writing papers, and debugging programs. Even though the UNC faculty involved are predominantly computer graphics researchers, these display systems are used mainly for text-oriented applications [5]. Designing, developing, and deploying an office-based system at LLNL would provide opportunities to adapt the system to our specific uses and to evaluate such systems for a range of tasks beyond those typically found at UNC. The goals of the LLNL display system are to exceed previous UNC versions in resolution, to run Unix-based applications, and to support interactive visualization of simulation data better than can be done via current workstations and monitors.

  15. FY-2010 Process Monitoring Technology Final Report

    SciTech Connect (OSTI)

    Orton, Christopher R.; Bryan, Samuel A.; Casella, Amanda J.; Hines, Wes; Levitskaia, Tatiana G.; henkell, J.; Schwantes, Jon M.; Jordan, Elizabeth A.; Lines, Amanda M.; Fraga, Carlos G.; Peterson, James M.; Verdugo, Dawn E.; Christensen, Ronald N.; Peper, Shane M.

    2011-01-01

    During FY 2010, work under the Spectroscopy-Based Process Monitoring task included ordering and receiving four fluid flow meters and four flow visible-near infrared spectrometer cells to be instrumented within the centrifugal contactor system at Pacific Northwest National Laboratory (PNNL). Initial demonstrations of real-time spectroscopic measurements on cold-stream simulants were conducted using plutonium (Pu)/uranium (U) (PUREX) solvent extraction process conditions. The specific test case examined the extraction of neodymium nitrate (Nd(NO3)3) from an aqueous nitric acid (HNO3) feed into a tri-n-butyl phosphate (TBP)/ n-dodecane solvent. Demonstration testing of this system included diverting a sample from the aqueous feed meanwhile monitoring the process in every phase using the on-line spectroscopic process monitoring system. The purpose of this demonstration was to test whether spectroscopic monitoring is capable of determining the mass balance of metal nitrate species involved in a cross-current solvent extraction scheme while also diverting a sample from the system. The diversion scenario involved diverting a portion of the feed from a counter-current extraction system while a continuous extraction experiment was underway. A successful test would demonstrate the ability of the process monitoring system to detect and quantify the diversion of material from the system during a real-time continuous solvent extraction experiment. The system was designed to mimic a PUREX-type extraction process with a bank of four centrifugal contactors. The aqueous feed contained Nd(NO3)3 in HNO3, and the organic phase was composed of TBP/n-dodecane. The amount of sample observed to be diverted by on-line spectroscopic process monitoring was measured to be 3 mmol (3 x 10-3 mol) Nd3+. This value was in excellent agreement with the 2.9 mmol Nd3+ value based on the known mass of sample taken (i.e., diverted) directly from the system feed solution.

  16. Coal liquefaction process with enhanced process solvent

    DOE Patents [OSTI]

    Givens, Edwin N.; Kang, Dohee

    1984-01-01

    In an improved coal liquefaction process, including a critical solvent deashing stage, high value product recovery is improved and enhanced process-derived solvent is provided by recycling second separator underflow in the critical solvent deashing stage to the coal slurry mix, for inclusion in the process solvent pool.

  17. Ultrasound contrast agent imaging: Real-time imaging of the superharmonics

    SciTech Connect (OSTI)

    Peruzzini, D.; Viti, J.; Tortoli, P.; Verweij, M. D.; Jong, N. de; Vos, H. J.

    2015-10-28

    Currently, in medical ultrasound contrast agent (UCA) imaging the second harmonic scattering of the microbubbles is regularly used. This scattering is in competition with the signal that is caused by nonlinear wave propagation in tissue. It was reported that UCA imaging based on the third or higher harmonics, i.e. “superharmonic” imaging, shows better contrast. However, the superharmonic scattering has a lower signal level compared to e.g. second harmonic signals. This study investigates the contrast-to-tissue ratio (CTR) and signal to noise ratio (SNR) of superharmonic UCA scattering in a tissue/vessel mimicking phantom using a real-time clinical scanner. Numerical simulations were performed to estimate the level of harmonics generated by the microbubbles. Data were acquired with a custom built dual-frequency cardiac phased array probe. Fundamental real-time images were produced while beam formed radiofrequency (RF) data was stored for further offline processing. The phantom consisted of a cavity filled with UCA surrounded by tissue mimicking material. The acoustic pressure in the cavity of the phantom was 110 kPa (MI = 0.11) ensuring non-destructivity of UCA. After processing of the acquired data from the phantom, the UCA-filled cavity could be clearly observed in the images, while tissue signals were suppressed at or below the noise floor. The measured CTR values were 36 dB, >38 dB, and >32 dB, for the second, third, and fourth harmonic respectively, which were in agreement with those reported earlier for preliminary contrast superharmonic imaging. The single frame SNR values (in which ‘signal’ denotes the signal level from the UCA area) were 23 dB, 18 dB, and 11 dB, respectively. This indicates that noise, and not the tissue signal, is the limiting factor for the UCA detection when using the superharmonics in nondestructive mode.

  18. Real-time nonlinear optimization as a generalized equation.

    SciTech Connect (OSTI)

    Zavala, V. M.; Anitescu, M. (Mathematics and Computer Science)

    2010-11-11

    We establish results for the problem of tracking a time-dependent manifold arising in real-time optimization by casting this as a parametric generalized equation. We demonstrate that if points along a solution manifold are consistently strongly regular, it is possible to track the manifold approximately by solving a single linear complementarity problem (LCP) at each time step. We derive sufficient conditions guaranteeing that the tracking error remains bounded to second order with the size of the time step even if the LCP is solved only approximately. We use these results to derive a fast, augmented Lagrangian tracking algorithm and demonstrate the developments through a numerical case study.

  19. Real-time human collaboration monitoring and intervention

    DOE Patents [OSTI]

    Merkle, Peter B.; Johnson, Curtis M.; Jones, Wendell B.; Yonas, Gerold; Doser, Adele B.; Warner, David J.

    2010-07-13

    A method of and apparatus for monitoring and intervening in, in real time, a collaboration between a plurality of subjects comprising measuring indicia of physiological and cognitive states of each of the plurality of subjects, communicating the indicia to a monitoring computer system, with the monitoring computer system, comparing the indicia with one or more models of previous collaborative performance of one or more of the plurality of subjects, and with the monitoring computer system, employing the results of the comparison to communicate commands or suggestions to one or more of the plurality of subjects.

  20. Near real time vapor detection and enhancement using aerosol adsorption

    DOE Patents [OSTI]

    Novick, V.J.; Johnson, S.A.

    1999-08-03

    A vapor sample detection method is described where the vapor sample contains vapor and ambient air and surrounding natural background particles. The vapor sample detection method includes the steps of generating a supply of aerosol that have a particular effective median particle size, mixing the aerosol with the vapor sample forming aerosol and adsorbed vapor suspended in an air stream, impacting the suspended aerosol and adsorbed vapor upon a reflecting element, alternatively directing infrared light to the impacted aerosol and adsorbed vapor, detecting and analyzing the alternatively directed infrared light in essentially real time using a spectrometer and a microcomputer and identifying the vapor sample. 13 figs.

  1. Near real time vapor detection and enhancement using aerosol adsorption

    DOE Patents [OSTI]

    Novick, Vincent J.; Johnson, Stanley A.

    1999-01-01

    A vapor sample detection method where the vapor sample contains vapor and ambient air and surrounding natural background particles. The vapor sample detection method includes the steps of generating a supply of aerosol that have a particular effective median particle size, mixing the aerosol with the vapor sample forming aerosol and adsorbed vapor suspended in an air stream, impacting the suspended aerosol and adsorbed vapor upon a reflecting element, alternatively directing infrared light to the impacted aerosol and adsorbed vapor, detecting and analyzing the alternatively directed infrared light in essentially real time using a spectrometer and a microcomputer and identifying the vapor sample.

  2. Continuous real-time measurement of aqueous cyanide

    SciTech Connect (OSTI)

    Rosentreter, Jeffrey J.; Gering, Kevin L.

    2007-03-06

    This invention provides a method and system capable of the continuous, real-time measurement of low concentrations of aqueous free cyanide (CN) using an on-line, flow through system. The system is based on the selective reactivity of cyanide anions and the characteristically nonreactive nature of metallic gold films, wherein this selective reactivity is exploited as an indirect measurement for aqueous cyanide. In the present invention the dissolution of gold, due to the solubilization reaction with the analyte cyanide anion, is monitored using a piezoelectric microbalance contained within a flow cell.

  3. Real Time Technology Application Demonstration Project Final Report

    SciTech Connect (OSTI)

    Volpe, John; Hampson, Steve; Johnson, Robert L

    2008-09-01

    The work and results described in this final report pertain to the demonstration of real-time characterization technologies applied to potentially contaminated surface soils in and around Area of Concern (AOC) 492 at the Paducah Gaseous Diffusion Plant (PGDP). The work was conducted under the auspices of Kentucky Research Consortium for Energy and Environment (KRCEE). KRCEE was created to support the Department of Energy's (DOE) efforts to complete the expeditious and economically viable environmental restoration of the Paducah Gaseous Diffusion Plant (PGDP), the Western Kentucky Wildlife Management Area (WKWMA), and surrounding areas.

  4. FY 2014 Real Property Data Related to Operations and Maintenance Guidance |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Real Property Data Related to Operations and Maintenance Guidance FY 2014 Real Property Data Related to Operations and Maintenance Guidance FY_2014_Data_Related_to_Operations_and_Maintenance_Memorandum.pdf (494.62 KB) More Documents & Publications FY 2013 Real Property Deferred, Actual, and Required Maintenance Reporting Requirement Guidance for Fiscal Year 2015 Facilities Information Management System Data Validations FY 2012 Real Property Deferred, Actual, and

  5. Comparison of Real World Energy Consumption to Models and DOE Test

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Procedures | Department of Energy Comparison of Real World Energy Consumption to Models and DOE Test Procedures Comparison of Real World Energy Consumption to Models and DOE Test Procedures This study investigates the real-world energy performance of appliances and equipment as it compares with models and test procedures. The study looked to determine whether DOE and industry test procedures actually replicate real world conditions, whether performance degrades over time, and whether

  6. Real-time automatic fiducial marker tracking in low contrast cine-MV images

    SciTech Connect (OSTI)

    Lin, Wei-Yang; Lin, Shu-Fang; Yang, Sheng-Chang; Liou, Shu-Cheng; Nath, Ravinder; Liu Wu

    2013-01-15

    standard deviations of the results from the 6 researchers are 2.3 and 2.6 pixels. The proposed framework takes about 128 ms to detect four markers in the first MV images and about 23 ms to track these markers in each of the subsequent images. Conclusions: The unified framework for tracking of multiple markers presented here can achieve marker detection accuracy similar to manual detection even in low-contrast cine-MV images. It can cope with shape deformations of fiducial markers at different gantry angles. The fast processing speed reduces the image processing portion of the system latency, therefore can improve the performance of real-time motion compensation.

  7. New Algorithm Enables Faster Simulations of Ultrafast Processes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Algorithm Enables Faster Simulations of Ultrafast Processes New Algorithm Enables Faster Simulations of Ultrafast Processes Opens the Door for Real-Time Simulations in Atomic-Level Materials Research February 20, 2015 Contact: Rachel Berkowitz, 510-486-7254, rberkowitz@lbl.gov femtosecondalgorithm copy Model of ion (Cl) collision with atomically thin semiconductor (MoSe2). Collision region is shown in blue and zoomed in; red points show initial positions of Cl. The simulation calculates the

  8. Real-time individualized training vectors for experiential learning.

    SciTech Connect (OSTI)

    Willis, Matt; Tucker, Eilish Marie; Raybourn, Elaine Marie; Glickman, Matthew R.; Fabian, Nathan

    2011-01-01

    Military training utilizing serious games or virtual worlds potentially generate data that can be mined to better understand how trainees learn in experiential exercises. Few data mining approaches for deployed military training games exist. Opportunities exist to collect and analyze these data, as well as to construct a full-history learner model. Outcomes discussed in the present document include results from a quasi-experimental research study on military game-based experiential learning, the deployment of an online game for training evidence collection, and results from a proof-of-concept pilot study on the development of individualized training vectors. This Lab Directed Research & Development (LDRD) project leveraged products within projects, such as Titan (Network Grand Challenge), Real-Time Feedback and Evaluation System, (America's Army Adaptive Thinking and Leadership, DARWARS Ambush! NK), and Dynamic Bayesian Networks to investigate whether machine learning capabilities could perform real-time, in-game similarity vectors of learner performance, toward adaptation of content delivery, and quantitative measurement of experiential learning.

  9. Quantitative real-time single particle analysis of virions

    SciTech Connect (OSTI)

    Heider, Susanne; Metzner, Christoph

    2014-08-15

    Providing information about single virus particles has for a long time been mainly the domain of electron microscopy. More recently, technologies have been developed—or adapted from other fields, such as nanotechnology—to allow for the real-time quantification of physical virion particles, while supplying additional information such as particle diameter concomitantly. These technologies have progressed to the stage of commercialization increasing the speed of viral titer measurements from hours to minutes, thus providing a significant advantage for many aspects of virology research and biotechnology applications. Additional advantages lie in the broad spectrum of virus species that may be measured and the possibility to determine the ratio of infectious to total particles. A series of disadvantages remain associated with these technologies, such as a low specificity for viral particles. In this review we will discuss these technologies by comparing four systems for real-time single virus particle analysis and quantification. - Highlights: • We introduce four methods for virus particle-based quantification of viruses. • They allow for quantification of a wide range of samples in under an hour time. • The additional measurement of size and zeta potential is possible for some.

  10. REAL TIME ULTRASONIC ALUMINUM SPOT WELD MONITORING SYSTEM

    SciTech Connect (OSTI)

    Regalado, W. Perez; Chertov, A. M.; Maev, R. Gr.

    2010-02-22

    Aluminum alloys pose several properties that make them one of the most popular engineering materials: they have excellent corrosion resistance, and high weight-to-strength ratio. Resistance spot welding of aluminum alloys is widely used today but oxide film and aluminum thermal and electrical properties make spot welding a difficult task. Electrode degradation due to pitting, alloying and mushrooming decreases the weld quality and adjustment of parameters like current and force is required. To realize these adjustments and ensure weld quality, a tool to measure weld quality in real time is required. In this paper, a real time ultrasonic non-destructive evaluation system for aluminum spot welds is presented. The system is able to monitor nugget growth while the spot weld is being made. This is achieved by interpreting the echoes of an ultrasound transducer located in one of the welding electrodes. The transducer receives and transmits an ultrasound signal at different times during the welding cycle. Valuable information of the weld quality is embedded in this signal. The system is able to determine the weld nugget diameter by measuring the delays of the ultrasound signals received during the complete welding cycle. The article presents the system performance on aluminum alloy AA6022.

  11. V-049: RealPlayer Buffer Overflow and Invalid Pointer Flaw Let Remote Users

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Execute Arbitrary Code | Department of Energy 9: RealPlayer Buffer Overflow and Invalid Pointer Flaw Let Remote Users Execute Arbitrary Code V-049: RealPlayer Buffer Overflow and Invalid Pointer Flaw Let Remote Users Execute Arbitrary Code December 18, 2012 - 1:30am Addthis PROBLEM: RealPlayer Buffer Overflow and Invalid Pointer Flaw Let Remote Users Execute Arbitrary Code PLATFORM: Windows RealPlayer 15.0.6.14 and prior. ABSTRACT: Two vulnerabilities were reported in RealPlayer. REFERENCE

  12. T-545: RealPlayer Heap Corruption Error in 'vidplin.dll' Lets Remote Users

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Execute Arbitrary Code | Department of Energy 5: RealPlayer Heap Corruption Error in 'vidplin.dll' Lets Remote Users Execute Arbitrary Code T-545: RealPlayer Heap Corruption Error in 'vidplin.dll' Lets Remote Users Execute Arbitrary Code January 28, 2011 - 7:21am Addthis PROBLEM: RealPlayer Heap Corruption Error in 'vidplin.dll' Lets Remote Users Execute Arbitrary Code. PLATFORM: RealPlayer 14.0.1 and prior versions ABSTRACT: A vulnerability was reported in RealPlayer. A remote user can

  13. Order Module--DOE O 430.1B, REAL PROPERTY ASSET MANAGEMENT | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy 30.1B, REAL PROPERTY ASSET MANAGEMENT Order Module--DOE O 430.1B, REAL PROPERTY ASSET MANAGEMENT "The objective of DOE O 430.1B, Real Property Asset Management, is to establish a corporate, holistic, and performance-based approach to real property life-cycle asset management that links real property asset planning, programming, budgeting, and evaluation to program mission projections and performance outcomes. To accomplish the objective, this Order identifies requirements and

  14. Special parallel processing workshop

    SciTech Connect (OSTI)

    1994-12-01

    This report contains viewgraphs from the Special Parallel Processing Workshop. These viewgraphs deal with topics such as parallel processing performance, message passing, queue structure, and other basic concept detailing with parallel processing.

  15. Desalination processes and performance

    SciTech Connect (OSTI)

    Summers, L. J.

    1995-06-01

    Different desalination processes are evaluated for feed, capacity, performance, energy requirements, and cost. These include distillation, reverse osmosis, or electrodialysis. Detailed information is given on distillation processes and membrane processes.

  16. Automated on-line L-edge measurement of SNM concentration for near-real-time accounting

    SciTech Connect (OSTI)

    Russo, P.A.; Marks, T. Jr.; Stephens, M.M.; Hsue, S.T.; Baker, A.L.; Cobb, D.D.

    1982-01-01

    The L-edge densitometer developed at Los Alamos National Laboratory has been modified, tested, and demonstrated for on-line assay of special nuclear material concentration in flowing solution streams. The demonstration was part of a larger demonstration of near-real-time nuclear materials accounting during a continuous, week-long, cold operation of the Allied General Nuclear Services facility in Barnwell, South Carolina. The L-edge data were automatically analyzed and the results were transmitted to the materials accounting computer once every 5.5 min for the duration of the cold run. This report compares the results of the L-edge analyses with the delayed results obtained from destructive analysis of samples withdrawn from the same process line. Comparisons are also made with the results obtained in near real time from an automated process control instrument installed in series with the L-edge densitometer. The performance of the L-edge instrument was reliable throughout the continous operation. The assay precision was consistent with that predicted by the counting statistics of the measurement. The results of the L-edge assays show good agreement with those of the destructive assays. A gradually varying discrepancy (of a few percent) between the L-edge and the process control results remains unexplained. 9 figures.

  17. Tracking Living Cells as They Differentiate in Real Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Alzheimer's disease, macular degeneration of the retina in diabetes, and mitochondrial diseases in children. In addition, specific processes like protein glycation can also be...

  18. Tracking Living Cells as They Differentiate in Real Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    these projects will target Alzheimer's disease, macular degeneration of the retina in diabetes, and mitochondrial diseases in children. In addition, specific processes like protein...

  19. Looking at Transistor Gate Oxide Formation in Real Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    on the oxidation process at this thickness. Available results are either for thicker layers grown under high-pressure conditions or for only the first couple of monolayers...

  20. Next Generation Manufacturing Processes

    Broader source: Energy.gov [DOE]

    New process technologies can rejuvenate U.S. manufacturing. Novel processing concepts can open pathways to double net energy productivity, enabling rapid manufacture of energy-efficient, high...

  1. Hydropower Process Improvements

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Process Improvements William J. Palmer Hydropower Program Manager South Atlantic Division 2 April 2015 BUILDING STRONG Focus Areas For Process Improvements InspectionsCondition ...

  2. Salt Waste Processing Initiatives

    Office of Environmental Management (EM)

    Patricia Suggs Salt Processing Team Lead Assistant Manager for Waste Disposition Project Office of Environmental Management Savannah River Site Salt Waste Processing Initiatives 2 ...

  3. Thermochemical Processes | Bioenergy | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Processes NREL is developing gasification and pyrolysis processes for the cost effective thermochemical conversion of biomass to biofuels and biofuel intermediaries. In our ...

  4. Biochemical Processes | Bioenergy | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Biochemical Processes NREL is developing biochemical conversion processes to generate sugars and sugars-derived intermediates for upgrading to biofuels and bioproducts. We develop ...

  5. Development of real time detector for fluorescent particles

    SciTech Connect (OSTI)

    Prevost, C.; Vendel, J.; Seigneur, A.

    1997-08-01

    Aerosols tagged by a fluorescent dye are a worthwhile tool within the framework of ventilation and filtration studies. The detection in real time of a specific particulate tracer allows characterization of ventilation behaviour such as air change rate, the determination of a good or bad mixing zone and transfer coefficient, or the determination of the decontamination factor for High Efficiency Particulate Air (HEPA) filters. Generally, these tests require specific aerosols in order to get rid of the atmospheric aerosol background. Until now the principle of fluorescent aerosol concentration measuring has only allowed an integral response with a time lag by means of sampling on filters and a fluorimetric analysis after specific conditioning of these filters. 5 refs., 13 figs.

  6. Real-Time Bioluminescent Tracking of Cellular Population Dynamics

    SciTech Connect (OSTI)

    Close, Dan; Sayler, Gary Steven; Xu, Tingting; Ripp, Steven Anthony

    2014-01-01

    Cellular population dynamics are routinely monitored across many diverse fields for a variety of purposes. In general, these dynamics are assayed either through the direct counting of cellular aliquots followed by extrapolation to the total population size, or through the monitoring of signal intensity from any number of externally stimulated reporter proteins. While both viable methods, here we describe a novel technique that allows for the automated, non-destructive tracking of cellular population dynamics in real-time. This method, which relies on the detection of a continuous bioluminescent signal produced through expression of the bacterial luciferase gene cassette, provides a low cost, low time-intensive means for generating additional data compared to alternative methods.

  7. Smart preamplifier for real-time turbine meter diagnostics

    SciTech Connect (OSTI)

    Breter, J.C.

    1995-12-31

    A new, dual-purpose device for turbine meters, which functions as a traditional signal preamplifier and accomplishes real-time performance diagnostics, is now available. This smart preamplifier (patent pending) utilizes high speed microprocessor technology to continuously monitor and analyze the rotation of a turbine meter rotor. Continuous monitoring allows the device to detect rotational anomalies that can lead to erroneous measurements as they occur. The smart preamplifier works on liquid or gas turbine meters that use a variable reluctance pickup coil for signal generation. This paper will discuss the technology and capabilities of the smart preamplifier. To simplify this discussion, it is assumed that the signal generated will be via a non-rimmed rotor. Thus, the term ``blade`` is used throughout. However, all discussions relevant to signal generation are also true for a rimmed rotor using either buttons or slots for signal generation.

  8. Real-time calibration of a feedback trap

    SciTech Connect (OSTI)

    Gavrilov, Momčilo; Jun, Yonggun; Bechhoefer, John

    2014-09-15

    Feedback traps use closed-loop control to trap or manipulate small particles and molecules in solution. They have been applied to the measurement of physical and chemical properties of particles and to explore fundamental questions in the non-equilibrium statistical mechanics of small systems. These applications have been hampered by drifts in the electric forces used to manipulate the particles. Although the drifts are small for measurements on the order of seconds, they dominate on time scales of minutes or slower. Here, we show that a recursive maximum likelihood (RML) algorithm can allow real-time measurement and control of electric and stochastic forces over time scales of hours. Simulations show that the RML algorithm recovers known parameters accurately. Experimental estimates of diffusion coefficients are also consistent with expected physical properties.

  9. Real time bunch length measurements in the SLC linac

    SciTech Connect (OSTI)

    Sheppard, J.C.; Clendenin, J.E.; James, M.B.; Miller, R.H.; Ross, M.C.

    1985-02-01

    The longitudinal charge distribution of bunches accelerated in the Stanford Linear Collider (SLC) linac will strongly affect the performance of the Collider. Bunch lengths are chosen in a balance between the deleterious effects of longitudinal and transverse wakefields. The former impacts on the beam energy spread whereas the latter is important to the transverse emittance. Two bunch length measurement ports have been installed in the SLC linac: one in the injector region and one after the emittance damping ring to linac reinjection point. These ports utilize a fused quartz Cerenkov radiator in conjunction with an electrooptic streak camera to permit real time monitoring of single s-band buckets with a resolution of several picoseconds. The design of the radiators and light collection optics is discussed with an emphasis on those issues important to high resolution. Experimental results are presented. 7 refs., 4 figs.

  10. Real-time neural network earthquake profile predictor

    DOE Patents [OSTI]

    Leach, Richard R.; Dowla, Farid U.

    1996-01-01

    A neural network has been developed that uses first-arrival energy to predict the characteristics of impending earthquake seismograph signals. The propagation of ground motion energy through the earth is a highly nonlinear function. This is due to different forms of ground motion as well as to changes in the elastic properties of the media throughout the propagation path. The neural network is trained using seismogram data from earthquakes. Presented with a previously unseen earthquake, the neural network produces a profile of the complete earthquake signal using data from the first seconds of the signal. This offers a significant advance in the real-time monitoring, warning, and subsequent hazard minimization of catastrophic ground motion.

  11. Capturing Real-Time Power System Dynamics: Opportunities and Challenges

    SciTech Connect (OSTI)

    Huang, Zhenyu; Zhou, Ning; Diao, Ruisheng; Wang, Shaobu; Elbert, Stephen T.; Meng, Da; Lu, Shuai

    2015-09-01

    The power grid evolves towards a new mix of generation and consumption that introduces new dynamic and stochastic behaviors. These emerging grid behaviors would invalidate the steady-state assumption in today’s state estimation – an essential function for real-time power grid operation. This paper examines this steady-state assumption and identifies the need for estimating dynamic states. Supporting technologies are presented as well as a proposed formulation for estimating dynamic states. Metrics for evaluating methods for solving the dynamic state estimation problem are proposed, with example results to illustrate the use of these metrics. The overall objective of this paper is to provide a basis that more research on this topic can follow.

  12. Real-time neural network earthquake profile predictor

    DOE Patents [OSTI]

    Leach, R.R.; Dowla, F.U.

    1996-02-06

    A neural network has been developed that uses first-arrival energy to predict the characteristics of impending earthquake seismograph signals. The propagation of ground motion energy through the earth is a highly nonlinear function. This is due to different forms of ground motion as well as to changes in the elastic properties of the media throughout the propagation path. The neural network is trained using seismogram data from earthquakes. Presented with a previously unseen earthquake, the neural network produces a profile of the complete earthquake signal using data from the first seconds of the signal. This offers a significant advance in the real-time monitoring, warning, and subsequent hazard minimization of catastrophic ground motion. 17 figs.

  13. Development of Real-Time Coal Monitoring Instrument

    SciTech Connect (OSTI)

    Rajan Gurjar, Ph.D.

    2010-06-17

    Relying on coal for energy requires optimizing the extraction of heat content from various blends of coal fuel and reducing harmful constituents and byproducts. Having a real-time measurement instrument provides relevant information about toxic constituents released in the atmosphere from burning coal and optimizes the performance of a power plant. A few commercial instruments exist and have been in operation for more than a decade. However, most of these instruments are based on radioactive sources and are bulky, expensive and time-consuming. The proposed instrument is based on the Laser Induced Breakdown Spectroscopy (LIBS). The advantage of LIBS is that it is a standoff instrument, does not require sample preparation and provides precise information about sample constituents.

  14. Nucleation and growth of MgO atomic layer deposition: A real-time spectroscopic ellipsometry study

    SciTech Connect (OSTI)

    Wang, Han; Fu, Kan

    2013-11-15

    The atomic layer deposition (ALD) of MgO thin films from bis(cyclopentadienyl) magnesium and H{sub 2}O was studied using in-situ real-time spectroscopic ellipsometry (SE), ex-situ x-ray photoelectron spectroscopy, and grazing-incidence x-ray diffraction. It is found that the initial growth is not linear during the first ten cycles, and magnesium silicate forms spontaneously on the SiO{sub 2}/Si substrates at 250 C. Submonolayer sensitivity of SE is demonstrated by the analysis of each half-cycle and self-limiting adsorption, revealing characteristic features of hetero- and homo-MgO ALD processes.

  15. Real-Time SCADA Cyber Protection Using Compression Techniques

    SciTech Connect (OSTI)

    Lyle G. Roybal; Gordon H Rueff

    2013-11-01

    The Department of Energy’s Office of Electricity Delivery and Energy Reliability (DOE-OE) has a critical mission to secure the energy infrastructure from cyber attack. Through DOE-OE’s Cybersecurity for Energy Delivery Systems (CEDS) program, the Idaho National Laboratory (INL) has developed a method to detect malicious traffic on Supervisory, Control, and Data Acquisition (SCADA) network using a data compression technique. SCADA network traffic is often repetitive with only minor differences between packets. Research performed at the INL showed that SCADA network traffic has traits desirable for using compression analysis to identify abnormal network traffic. An open source implementation of a Lempel-Ziv-Welch (LZW) lossless data compression algorithm was used to compress and analyze surrogate SCADA traffic. Infected SCADA traffic was found to have statistically significant differences in compression when compared against normal SCADA traffic at the packet level. The initial analyses and results are clearly able to identify malicious network traffic from normal traffic at the packet level with a very high confidence level across multiple ports and traffic streams. Statistical differentiation between infected and normal traffic level was possible using a modified data compression technique at the 99% probability level for all data analyzed. However, the conditions tested were rather limited in scope and need to be expanded into more realistic simulations of hacking events using techniques and approaches that are better representative of a real-world attack on a SCADA system. Nonetheless, the use of compression techniques to identify malicious traffic on SCADA networks in real time appears to have significant merit for infrastructure protection.

  16. Robotic real-time translational and rotational head motion correction during frameless stereotactic radiosurgery

    SciTech Connect (OSTI)

    Liu, Xinmin; Belcher, Andrew H.; Grelewicz, Zachary; Wiersma, Rodney D.

    2015-06-15

    Purpose: To develop a control system to correct both translational and rotational head motion deviations in real-time during frameless stereotactic radiosurgery (SRS). Methods: A novel feedback control with a feed-forward algorithm was utilized to correct for the coupling of translation and rotation present in serial kinematic robotic systems. Input parameters for the algorithm include the real-time 6DOF target position, the frame pitch pivot point to target distance constant, and the translational and angular Linac beam off (gating) tolerance constants for patient safety. Testing of the algorithm was done using a 4D (XY Z + pitch) robotic stage, an infrared head position sensing unit and a control computer. The measured head position signal was processed and a resulting command was sent to the interface of a four-axis motor controller, through which four stepper motors were driven to perform motion compensation. Results: The control of the translation of a brain target was decoupled with the control of the rotation. For a phantom study, the corrected position was within a translational displacement of 0.35 mm and a pitch displacement of 0.15° 100% of the time. For a volunteer study, the corrected position was within displacements of 0.4 mm and 0.2° over 98.5% of the time, while it was 10.7% without correction. Conclusions: The authors report a control design approach for both translational and rotational head motion correction. The experiments demonstrated that control performance of the 4D robotic stage meets the submillimeter and subdegree accuracy required by SRS.

  17. Evaluation of the feasibility of a pipeline field weld real-time radiography (radioscopy) inspection system

    SciTech Connect (OSTI)

    Tucker, J.E.; Rudarmel, M.W.; Sayler, G.C.; Garrison, L.E.

    1996-02-01

    Inspection of pipeline field girth welds during pipeline construction is accomplished by film radiographic methods. Film radiography of materials is a 70 year old technology. There have been many advances in that 70 year history in equipment and films, but the process of making the radiograph is essentially the same. The film radiography process is time-consuming, costly, environmentally impacting and very operator (inspector) dependent. There are recent and almost daily advances in technologies using x-ray imaging other than film. Double-jointed pipe welds at pipe mills and at double-joint operations have been inspected with stationary real-time radioscopic systems for many years. This electronic imaging technology, known as {open_quotes}radioscopy{close_quotes}, has the potential to significantly improve pipeline project schedules and cost by eliminating some of the shortcomings of film radiography. Radioscopy is currently accepted for use by many nationally accepted standards including API-5L, Specification for Line Pipe, and API-1104, Welding of Pipelines and Related Facilities. Seven years ago PRC contracted Southwest Research Institute (SwRI) to research radioscopy for field application. This effort did not yield a suitable field system even though the study by SwRI concluded that it was feasible and would be cost effective.

  18. In-Situ Real Time Measurements of Molten Glass Properties, Final Report

    SciTech Connect (OSTI)

    Robert De Saro; Joe Craparo

    2007-12-16

    Energy Research Company (ERCo) of Staten Island, NY has developed a sensor capable of measuring in situ and in real time, both the elemental composition and the temperature of molten glass. A prototype sensor has been designed, constructed and tested in ERCo's laboratory. The sensor was used to collect atomic emission spectra from molten fiberglass via Laser Induced Breakdown Spectroscopy (LIBS). From these spectra, we were able to readily identify all elements of interest (B, Si, Ca, Fe, Mg, Na, Sr, Al). The high signal-to-background signals achieved suggest that data from the sensor can be used to determine elemental concentrations, either through calibration curves or using ERCo's calibrationless method. ERCo's technology fits in well with DOE's Glass Industry Technology Roadmap which emphasizes the need for accurate process and feedstock sensors. Listed first under technological barriers to increased production efficiency is the 'Inability to accurately measure and control the production process'. A large-scale glass melting furnace, developed by SenCer Inc. of Penn Yan, NY was installed in ERCo's laboratory to ensure that a large enough quantity of glass could be melted and held at temperature in the presence of the water-cooled laser sensor without solidifying the glass.

  19. Idaho Chemical Processing Plant Process Efficiency improvements

    SciTech Connect (OSTI)

    Griebenow, B.

    1996-03-01

    In response to decreasing funding levels available to support activities at the Idaho Chemical Processing Plant (ICPP) and a desire to be cost competitive, the Department of Energy Idaho Operations Office (DOE-ID) and Lockheed Idaho Technologies Company have increased their emphasis on cost-saving measures. The ICPP Effectiveness Improvement Initiative involves many activities to improve cost effectiveness and competitiveness. This report documents the methodology and results of one of those cost cutting measures, the Process Efficiency Improvement Activity. The Process Efficiency Improvement Activity performed a systematic review of major work processes at the ICPP to increase productivity and to identify nonvalue-added requirements. A two-phase approach was selected for the activity to allow for near-term implementation of relatively easy process modifications in the first phase while obtaining long-term continuous improvement in the second phase and beyond. Phase I of the initiative included a concentrated review of processes that had a high potential for cost savings with the intent of realizing savings in Fiscal Year 1996 (FY-96.) Phase II consists of implementing long-term strategies too complex for Phase I implementation and evaluation of processes not targeted for Phase I review. The Phase II effort is targeted for realizing cost savings in FY-97 and beyond.

  20. ARM - Process Configuration Manager

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FormsProcess Configuration Manager Ingest Ingest Workflow Graphic Supporting Workflow Documentation Supporting Tools and Forms Process Configuration Manager (PCM) Metadata Management Tool (MMT) ARM Data Integrator (ADI) Ingest Readiness Form Associated Status Reports Contacts Engineering Processes Engineering Home Workflow Graphic Engineering Workflow Document Tools for Workflow ECR ECO BCR Ingests Value-Added Products Reprocessing Instruments Data System Elements Field Campaign Startup Process

  1. Working testing process

    SciTech Connect (OSTI)

    Sparkman, D.

    1997-11-01

    This report contains viewgraphs on the process of testing security and intrusion detection software.

  2. A Neutron Monitor for In-Situ Real-Time Determination of Transuranics in a Processed Waste Effluent Stream

    SciTech Connect (OSTI)

    Brodzinski, Ronald L.; Craig, Richard A.; Hensley, Walter K.; Lepel, Elwood A.; Seymour, R.; Smart, John E.

    2001-05-01

    A pilot plant operation at the Savannah River Site will demonstrate the removal of 90Sr, 137Cs, and transuranics from a high-level liquid waste stream prior to encapsulation in a Saltstone Facility.

  3. Unique Hardware and Software Data Acquisition and Processing Solutions in a

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Small Engine Test Cell for Enhanced Kinetic Engine Modeling Accuracy | Department of Energy Hardware and Software Data Acquisition and Processing Solutions in a Small Engine Test Cell for Enhanced Kinetic Engine Modeling Accuracy Unique Hardware and Software Data Acquisition and Processing Solutions in a Small Engine Test Cell for Enhanced Kinetic Engine Modeling Accuracy Novel use of AVL data acquisition/processing units provides simultaneous real-time acquisition, processing, and storage

  4. Basics of Polar-Format algorithm for processing Synthetic Aperture Radar images.

    SciTech Connect (OSTI)

    Doerry, Armin Walter

    2012-05-01

    The purpose of this report is to provide a background to Synthetic Aperture Radar (SAR) image formation using the Polar Format (PFA) processing algorithm. This is meant to be an aid to those tasked to implement real-time image formation using the Polar Format processing algorithm.

  5. IDP: Image and data processing (software) in C++

    SciTech Connect (OSTI)

    Lehman, S.

    1994-11-15

    IDP++(Image and Data Processing in C++) is a complied, multidimensional, multi-data type, signal processing environment written in C++. It is being developed within the Radar Ocean Imaging group and is intended as a partial replacement for View. IDP++ takes advantage of the latest object-oriented compiler technology to provide `information hiding.` Users need only know C, not C++. Signals are treated like any other variable with a defined set of operators and functions in an intuitive manner. IDP++ is being designed for real-time environment where interpreted signal processing packages are less efficient.

  6. Fundamental Concepts of Digital Image Processing

    DOE R&D Accomplishments [OSTI]

    Twogood, R. E.

    1983-03-01

    The field of a digital-image processing has experienced dramatic growth and increasingly widespread applicability in recent years. Fortunately, advances in computer technology have kept pace with the rapid growth in volume of image data in these and other applications. Digital image processing has become economical in many fields of research and in industrial and military applications. While each application has requirements unique from the others, all are concerned with faster, cheaper, more accurate, and more extensive computation. The trend is toward real-time and interactive operations, where the user of the system obtains preliminary results within a short enough time that the next decision can be made by the human processor without loss of concentration on the task at hand. An example of this is the obtaining of two-dimensional (2-D) computer-aided tomography (CAT) images. A medical decision might be made while the patient is still under observation rather than days later.

  7. Cupola Furnace Computer Process Model

    SciTech Connect (OSTI)

    Seymour Katz

    2004-12-31

    The cupola furnace generates more than 50% of the liquid iron used to produce the 9+ million tons of castings annually. The cupola converts iron and steel into cast iron. The main advantages of the cupola furnace are lower energy costs than those of competing furnaces (electric) and the ability to melt less expensive metallic scrap than the competing furnaces. However the chemical and physical processes that take place in the cupola furnace are highly complex making it difficult to operate the furnace in optimal fashion. The results are low energy efficiency and poor recovery of important and expensive alloy elements due to oxidation. Between 1990 and 2004 under the auspices of the Department of Energy, the American Foundry Society and General Motors Corp. a computer simulation of the cupola furnace was developed that accurately describes the complex behavior of the furnace. When provided with the furnace input conditions the model provides accurate values of the output conditions in a matter of seconds. It also provides key diagnostics. Using clues from the diagnostics a trained specialist can infer changes in the operation that will move the system toward higher efficiency. Repeating the process in an iterative fashion leads to near optimum operating conditions with just a few iterations. More advanced uses of the program have been examined. The program is currently being combined with an ''Expert System'' to permit optimization in real time. The program has been combined with ''neural network'' programs to affect very easy scanning of a wide range of furnace operation. Rudimentary efforts were successfully made to operate the furnace using a computer. References to these more advanced systems will be found in the ''Cupola Handbook''. Chapter 27, American Foundry Society, Des Plaines, IL (1999).

  8. Quasi real time in vivo dosimetry for VMAT

    SciTech Connect (OSTI)

    Fidanzio, A.; Azario, L.; U.O.C di Fisica Sanitaria, Università Cattolica del Sacro Cuore, Rome 00168; Istituto Nazionale di Fisica Nucleare , Sezione di Roma Tre, Rome 00146 ; Porcelli, A.; Greco, F.; Istituto Nazionale di Fisica Nucleare , Sezione di Roma Tre, Rome 00146 ; Cilla, S.; Grusio, M.; Balducci, M.; Valentini, V.; Piermattei, A.

    2014-06-15

    Purpose: Results about the feasibility of a method for quasi real timein vivo dosimetry (IVD) at the isocenter point for volumetric modulated arc therapy (VMAT) are here reported. The method is based on correlations between the EPID signal and the dose on the beam central axis. Moreover, the γ-analysis of EPID images was adopted to verify off-axis reproducibility of fractionated plan delivery. Methods: An algorithm to reconstructin vivo the isocenter dose, D{sub iso}, for RapidArc treatments has been developed. 20 VMAT plans, optimized with two opposite arcs, for prostate, pancreas, and head treatments have been delivered by a Varian linac both to a conic PMMA phantom with elliptical section and to patients. The ratios R between reconstructed D{sub iso} and the planned doses were determined for phantom and patient irradiations adopting an acceptance criterion of ±5%. In total, 40 phantom checks and 400 patient checks were analyzed. Moreover, 3% and 3 mm criteria were adopted for portal image γ-analysis to assess patient irradiation reproducibility. Results: The average ratio R, between reconstructed and planned doses for the PMMA phantom irradiations was equal to 1.007 ± 0.024. When the IVD method was applied to the 20 patients, the average R ratio was equal to 1.003 ± 0.017 and 96% of the tests were within the acceptance criteria. The portal image γ-analysis supplied 88% of the tests within the pass rates γ{sub mean} ≤ 0.4 and P{sub γ<1} ≥ 98%. All the warnings were understood comparing the CT and the cone beam CT images and in one case a patient's setup error was detected and corrected for the successive fractions. Conclusions: This preliminary experience suggests that the method is able to detect dosimetric errors in quasi real time at the end of the therapy session. The authors intend to extend this procedure to other pathologies with the integration of in-room imaging verification by cone beam CT.

  9. The Department's real property assets are vital to the accomplishment of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    its mission | Department of Energy The Department&#8217;s real property assets are vital to the accomplishment of its mission The Department&#8217;s real property assets are vital to the accomplishment of its mission The Department&#8217;s real property assets are vital to the accomplishment of its mission (144.65 KB) More Documents & Publications Three Year Rolling Timeline Three-year Rolling Timeline FY2012 Three Year Rolling Timeline

  10. Real-World Greenhouse Gas Emissions from a MY2010 Diesel Truck Traveling

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Across the Continental United States | Department of Energy Real-World Greenhouse Gas Emissions from a MY2010 Diesel Truck Traveling Across the Continental United States Real-World Greenhouse Gas Emissions from a MY2010 Diesel Truck Traveling Across the Continental United States Data analysis from this study will provide insight into real-world performance of current emissions reduction devices, under various operating conditions, and with respect to greenhouse gas emissions. p-03_carder.pdf

  11. Wireless technology collects real-time information from oil and gas wells

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Wireless technology collects real-time information from oil and gas wells Wireless technology collects real-time information from oil and gas wells The patented system delivers continuous electromagnetic data on the reservoir conditions, enabling economical and effective monitoring and analysis. April 3, 2012 One of several active projects, LANL and Chevron co-developed INFICOMM(tm), a wireless technology used to collect real-time temperature and pressure information from sensors in oil and gas

  12. Steps to Establish a Real-Time Transmission Monitoring System for

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Transmission Owners and Operators within the Eastern and Western Interconnections | Department of Energy Steps to Establish a Real-Time Transmission Monitoring System for Transmission Owners and Operators within the Eastern and Western Interconnections Steps to Establish a Real-Time Transmission Monitoring System for Transmission Owners and Operators within the Eastern and Western Interconnections Steps to establish a real-time transmission monitoring system for transmission owners and

  13. Development of Real-Time, Gas Quality Sensor Technology - Fact Sheet 2015

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy Real-Time, Gas Quality Sensor Technology - Fact Sheet 2015 Development of Real-Time, Gas Quality Sensor Technology - Fact Sheet 2015 The Gas Technology Institute, in collaboration with several project partners, will bring together real-time, gas quality sensor technology with engine management for opportunity fuels. The project is a unique industry effort that will improve the performance, increase efficiency, raise system reliability, and provide improved project

  14. Implementation of the REAL ID Act | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Visiting Us / Entry Requirements / Implementation of the REAL ... Implementation of the REAL ID Act Congress, acting on the recommendations of the 9/11 Commission, passed the REAL ID Act in an effort to reduce fraud and deter acts of terrorism using fraudulent identification. This Act sets minimum standards for the issuance of driver's licenses and other identification documents. In accordance with the Act, the Department of Homeland Security established implementing standards. Among these is a

  15. Real Property Management | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Real Property Management Integrated Support Center (ISC) ISC Home About Services Freedom of Information Act (FOIA) Privacy Act NEPA Documents Contact Information Integrated Support Center Roxanne Purucker U.S. Department of Energy 9800 S. Cass Avenue Argonne, IL 60439 P: (630) 252-2110 Kenneth Tarcza U.S. Department of Energy 200 Administration Road Oak Ridge, TN 37830 P: (865) 576-4444 Services Real Property Management Print Text Size: A A A FeedbackShare Page Real Property Management provides

  16. Vehicle Technologies Office Merit Review 2015: Analyzing Real-World Light

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Duty Vehicle Efficiency Benefits | Department of Energy Analyzing Real-World Light Duty Vehicle Efficiency Benefits Vehicle Technologies Office Merit Review 2015: Analyzing Real-World Light Duty Vehicle Efficiency Benefits Presentation given by National Renewable Energy Laboratory at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about analyzing real-world light duty vehicle efficiency benefits.

  17. Direct Real-Time Detection of Vapors from Explosive Compounds

    SciTech Connect (OSTI)

    Ewing, Robert G.; Clowers, Brian H.; Atkinson, David A.

    2013-10-03

    The real-time detection of vapors from low volatility explosives including PETN, tetryl, RDX and nitroglycerine along with various compositions containing these substances is demonstrated. This was accomplished with an atmospheric flow tube (AFT) using a non-radioactive ionization source and coupled to a mass spectrometer. Direct vapor detection was demonstrated in less than 5 seconds at ambient temperature without sample pre-concentration. The several seconds of residence time of analytes in the AFT provides a significant opportunity for reactant ions to interact with analyte vapors to achieve ionization. This extended reaction time, combined with the selective ionization using the nitrate reactant ions (NO3- and NO3-HNO3), enables highly sensitive explosives detection. Observed signals from diluted explosive vapors indicate detection limits below 10 ppqv using selected ion monitoring (SIM) of the explosive-nitrate adduct at m/z 349, 378, 284 and 289 for tetryl, PETN, RDX and NG respectively. Also provided is a demonstration of the vapor detection from 10 different energetic formulations, including double base propellants, plastic explosives and commercial blasting explosives using SIM for the NG, PETN and RDX product ions.

  18. Standard Model with a real singlet scalar and inflation

    SciTech Connect (OSTI)

    Enqvist, Kari; Nurmi, Sami; Tenkanen, Tommi; Tuominen, Kimmo E-mail: sami.nurmi@helsinki.fi E-mail: kimmo.i.tuominen@helsinki.fi

    2014-08-01

    We study the post-inflationary dynamics of the Standard Model Higgs and a real singlet scalar s, coupled together through a renormalizable coupling ?{sub sh}h{sup 2}s{sup 2}, in a Z{sub 2} symmetric model that may explain the observed dark matter abundance and/or the origin of baryon asymmetry. The initial values for the Higgs and s condensates are given by inflationary fluctuations, and we follow their dissipation and relaxation to the low energy vacua. We find that both the lowest order perturbative and the non-perturbative decays are blocked by thermal effects and large background fields and that the condensates decay by two-loop thermal effects. Assuming instant reheating at T=10{sup 16} GeV, the characteristic temperature for the Higgs condensate thermalization is found to be T{sub h}?10{sup 14} GeV, whereas s thermalizes typically around T{sub s}?10{sup 6} GeV. By that time, the amplitude of the singlet is driven very close to the vacuum value by the expansion of the universe, unless the portal coupling takes a value ?{sub sh}?<10{sup -7} and the singlet s never thermalizes. With these values of the coupling, it is possible to slowly produce a sizeable fraction of the observed dark matter abundance via singlet condensate fragmentation and thermal Higgs scattering. Physics also below the electroweak scale can therefore be affected by the non-vacuum initial conditions generated by inflation.

  19. Kinetic Modeling of Combustion Characteristics of Real Biodiesel Fuels

    SciTech Connect (OSTI)

    Naik, C V; Westbrook, C K

    2009-04-08

    Biodiesel fuels are of much interest today either for replacing or blending with conventional fuels for automotive applications. Predicting engine effects of using biodiesel fuel requires accurate understanding of the combustion characteristics of the fuel, which can be acquired through analysis using reliable detailed reaction mechanisms. Unlike gasoline or diesel that consists of hundreds of chemical compounds, biodiesel fuels contain only a limited number of compounds. Over 90% of the biodiesel fraction is composed of 5 unique long-chain C{sub 18} and C{sub 16} saturated and unsaturated methyl esters. This makes modeling of real biodiesel fuel possible without the need for a fuel surrogate. To this end, a detailed chemical kinetic mechanism has been developed for determining the combustion characteristics of a pure biodiesel (B100) fuel, applicable from low- to high-temperature oxidation regimes. This model has been built based on reaction rate rules established in previous studies at Lawrence Livermore National Laboratory. Computed results are compared with the few fundamental experimental data that exist for biodiesel fuel and its components. In addition, computed results have been compared with experimental data for other long-chain hydrocarbons that are similar in structure to the biodiesel components.

  20. Real-time algorithm for robust coincidence search

    SciTech Connect (OSTI)

    Petrovic, T.; Vencelj, M.; Lipoglavsek, M.; Gajevic, J.; Pelicon, P.

    2012-10-20

    In in-beam {gamma}-ray spectroscopy experiments, we often look for coincident detection events. Among every N events detected, coincidence search is naively of principal complexity O(N{sup 2}). When we limit the approximate width of the coincidence search window, the complexity can be reduced to O(N), permitting the implementation of the algorithm into real-time measurements, carried out indefinitely. We have built an algorithm to find simultaneous events between two detection channels. The algorithm was tested in an experiment where coincidences between X and {gamma} rays detected in two HPGe detectors were observed in the decay of {sup 61}Cu. Functioning of the algorithm was validated by comparing calculated experimental branching ratio for EC decay and theoretical calculation for 3 selected {gamma}-ray energies for {sup 61}Cu decay. Our research opened a question on the validity of the adopted value of total angular momentum of the 656 keV state (J{sup {pi}} = 1/2{sup -}) in {sup 61}Ni.

  1. Quantum corrections in Higgs inflation: the real scalar case

    SciTech Connect (OSTI)

    George, Damien P.; Mooij, Sander; Postma, Marieke E-mail: sander.mooij@ing.uchile.cl

    2014-02-01

    We present a critical discussion of quantum corrections, renormalisation, and the computation of the beta functions and the effective potential in Higgs inflation. In contrast with claims in the literature, we find no evidence for a disagreement between the Jordan and Einstein frames, even at the quantum level. For clarity of discussion we concentrate on the case of a real scalar Higgs. We first review the classical calculation and then discuss the back reaction of gravity. We compute the beta functions for the Higgs quartic coupling and non-minimal coupling constant. Here, the mid-field regime is non-renormalisable, but we are able to give an upper bound on the 1-loop corrections to the effective potential. We show that, in computing the effective potential, the Jordan and Einstein frames are compatible if all mass scales are transformed between the two frames. As such, it is consistent to take a constant cutoff in either the Jordan or Einstein frame, and both prescriptions yield the same result for the effective potential. Our results are extended to the case of a complex scalar Higgs.

  2. Real time detection and correction of distribution feeder operational problems

    SciTech Connect (OSTI)

    Subramanian, A.K.; Huang, J.C.

    1995-12-31

    The paper presents a new technique that detects and corrects distribution operational problems using closed loop control of substation transformers, capacitors and reactors by an online computer. This allows the distribution system to be operated close to its capacity without sacrificing the quality of power supply. Such operations help defer the additional cost of installing new substations. The technique integrates the Distribution Feeder Analysis (DFA) and the Distribution Substation Control (DSC) functions to achieve this. The DFA function provides the topology and power flow results for the feeders using the substation real time measurements. It does not require feeder section measurements. The realtime feeder results are used in detecting any currently existing feeder operational problems such as feeder section voltages and currents outside their limits. The detected feeder problems are transformed into substation distribution bus objectives and then corrected by the DSC function using controls available at the substation. The DSC function has been performing successfully for several years at Potomac Electric Power Company (PEPCO) in Washington, D.C. It uses a closed loop control scheme that controls the substation transformer taps and shunt capacitor and reactor breakers and optimizes the substation operation. By combining the DFA and DSC functions into a single function and with proper transformation of feeder problems into substation objectives, a new closed loop control scheme for the substation controls is achieved. This scheme corrects the detected feeder problems and optimizes the substation operation. This technique is implemented and tested using the actual substation and feeder models of PEPCO.

  3. Cybersecurity through Real-Time Distributed Control Systems

    SciTech Connect (OSTI)

    Kisner, Roger A; Manges, Wayne W; MacIntyre, Lawrence Paul; Nutaro, James J; Munro Jr, John K; Ewing, Paul D; Howlader, Mostofa; Kuruganti, Phani Teja; Wallace, Richard M; Olama, Mohammed M

    2010-04-01

    Critical infrastructure sites and facilities are becoming increasingly dependent on interconnected physical and cyber-based real-time distributed control systems (RTDCSs). A mounting cybersecurity threat results from the nature of these ubiquitous and sometimes unrestrained communications interconnections. Much work is under way in numerous organizations to characterize the cyber threat, determine means to minimize risk, and develop mitigation strategies to address potential consequences. While it seems natural that a simple application of cyber-protection methods derived from corporate business information technology (IT) domain would lead to an acceptable solution, the reality is that the characteristics of RTDCSs make many of those methods inadequate and unsatisfactory or even harmful. A solution lies in developing a defense-in-depth approach that ranges from protection at communications interconnect levels ultimately to the control system s functional characteristics that are designed to maintain control in the face of malicious intrusion. This paper summarizes the nature of RTDCSs from a cybersecurity perspec tive and discusses issues, vulnerabilities, candidate mitigation approaches, and metrics.

  4. Real-space representation of electron correlation in ?-conjugated systems

    SciTech Connect (OSTI)

    Wang, Jian E-mail: e.j.baerends@vu.nl; Baerends, Evert Jan E-mail: e.j.baerends@vu.nl

    2015-05-28

    ?-electron conjugation and aromaticity are commonly associated with delocalization and especially high mobility of the ? electrons. We investigate if also the electron correlation (pair density) exhibits signatures of the special electronic structure of conjugated systems. To that end the shape and extent of the pair density and derived quantities (exchange-correlation hole, Coulomb hole, and conditional density) are investigated for the prototype systems ethylene, hexatriene, and benzene. The answer is that the effects of ? electron conjugation are hardly discernible in the real space representations of the electron correlation. We find the xc hole to be as localized (confined to atomic or diatomic regions) in conjugated systems as in small molecules. This result is relevant for density functional theory (DFT). The potential of the electron exchange-correlation hole is the largest part of v{sub xc}, the exchange-correlation Kohn-Sham potential. So the extent of the hole directly affects the orbital energies of both occupied and unoccupied Kohn-Sham orbitals and therefore has direct relevance for the excitation spectrum as calculated with time-dependent DFT calculations. The potential of the localized xc hole is comparatively more attractive than the actual hole left behind by an electron excited from a delocalized molecular orbital of a conjugated system.

  5. Real-Time Soils Characterization and Analyses Systems Used at Ohio Closure Sites

    SciTech Connect (OSTI)

    Roybal, Lyle Gene; Carpenter, Michael Vance; Giles, John Robert; Hartwell, John Kelvin; Danahy, R.

    2003-02-01

    The Idaho National Engineering and Environmental Laboratory (INEEL) and the Fernald Environmental Management Project (FEMP) have jointly developed a field-deployed analytical system to rapidly scan, characterize, and analyze surface soil contamination. The basic system consists of a sodium iodide (NaI) spectrometer and global positioning system (GPS) hardware. This hardware can be deployed from any of four different platforms depending on the scope of the survey at hand. These platforms range from a large tractor-based unit (the RTRAK) used to survey large, relatively flat areas to a hand-pushed unit where maneuverability is important, to an excavator mounted system used to scan pits and trenches. The mobile sodium iodide concept was initially developed by the FEMP to provide pre-screening analyses for soils contaminated with uranium, thorium, and radium. The initial study is documented in the RTRAK Applicability Study and provides analyses supporting the field usage of the concept. The RTRAK system produced data that required several days of post-processing and analyses to generate an estimation of field coverage and activity levels. The INEEL has provided integrated engineering, computer hardware and software support to greatly streamline the data acquisition and analysis process to the point where real-time activity and coverage maps are available to the field technicians. On-line analyses have been added to automatically convert GPS data to Ohio State-Plane coordinates, examine and correct collected spectra for energy calibration drifts common to NaI spectrometers, and strip spectra in regions of interest to provide moisture corrected activity levels for total uranium, thorium-232, and radium-226. Additionally, the software provides a number of checks and alarms to alert operators that a hand-examination of spectral data in a particular area may be required. The FEMP has estimated that this technology has produced projected site savings in excess of $34M

  6. U.S. Department of Energy Launches Real World Design Challenge | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Real World Design Challenge U.S. Department of Energy Launches Real World Design Challenge October 20, 2008 - 4:14pm Addthis Goal of New Competition Is to Inspire High School Students to Study Engineering WASHINGTON, DC - The U.S. Department of Energy (DOE) has launched the Real World Design Challenge (RWDC), a new annual competition that provides high school students with the opportunity to work on real world engineering challenges in a collaborative environment. The purpose of

  7. Real-Time Particulate Mass Measurements Pre and Post Diesel Particulat...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Advanced Radio Frequency-Based Sensors for Monitoring Diesel Particulate Filter Loading and Regeneration Real-Time Measurement of Diesel Trap ...

  8. EERE Success Story-Competition Provides Students with Real-World...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Competition Provides Students with Real-World Engineering ... also develop business, marketing, and education strategies ... Cal State, Los Angeles - California Colorado State - ...

  9. ARM Data Quality Office … Real-Time Assessment of Instrument...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Data Quality Office Real-Time Assessment of ARM Data *Ken Kehoe *Randy Peppler *Karen Sonntag *Terra Thompson *Nathan Hiers *Chris Schwarz Cooperative Institute for Mesoscale ...

  10. V-228: RealPlayer Buffer Overflow and Memory Corruption Error Let Remote

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Users Execute Arbitrary Code | Department of Energy 8: RealPlayer Buffer Overflow and Memory Corruption Error Let Remote Users Execute Arbitrary Code V-228: RealPlayer Buffer Overflow and Memory Corruption Error Let Remote Users Execute Arbitrary Code August 27, 2013 - 6:00am Addthis PROBLEM: Two vulnerabilities were reported in RealPlayer PLATFORM: RealPlayer 16.0.2.32 and prior ABSTRACT: A remote user can cause arbitrary code to be executed on the target user's system REFERENCE LINKS:

  11. Real-time sub-ngstrom...

    Office of Scientific and Technical Information (OSTI)

    Real-time sub-ngstrom imaging of reversible and irreversible conformations in rhodium catalysts and graphene Kisielowski, Christian; Wang,...

  12. GAO-11-520T Federal Real Property: Progress Made on Planning...

    Broader source: Energy.gov (indexed) [DOE]

    Economic Development, Public Buildings and Emergency Management, Committee on Transportation and Infrastructure, House of Representatives FEDERAL REAL PROPERTY Progress Made on...

  13. GAO-15-305, DOE Real Property: Better Data and More Proactive...

    Office of Environmental Management (EM)

    DOE REAL PROPERTY Better Data and a More Proactive Approach Needed to Facilitate Property Disposal Report to the Chairman, Subcommittee on Energy and Water Development, Committee...

  14. Waste processing air cleaning

    SciTech Connect (OSTI)

    Kriskovich, J.R.

    1998-07-27

    Waste processing and preparing waste to support waste processing relies heavily on ventilation. Ventilation is used at the Hanford Site on the waste storage tanks to provide confinement, cooling, and removal of flammable gases.

  15. Risk Management Process Overview

    Broader source: Energy.gov [DOE]

    The cybersecurity risk management process explained in the Electricity Sector Cybersecurity Risk Management Process (RMP) Guideline has two primary components: the risk management model and the the risk management cycle.

  16. Gas-separation process

    DOE Patents [OSTI]

    Toy, Lora G.; Pinnau, Ingo; Baker, Richard W.

    1994-01-01

    A process for separating condensable organic components from gas streams. The process makes use of a membrane made from a polymer material that is glassy and that has an unusually high free volume within the polymer material.

  17. Corrective Actions Process

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Community, Environment » Environmental Stewardship » Environmental Cleanup » Corrective Actions Corrective Actions Process The general process for evaluating and remediating potential release sites is called the corrective action process. Contact Environmental Communication & Public Involvement P.O. Box 1663 MS M996 Los Alamos, NM 87545 (505) 667-0216 Email Corrective actions The Laboratory's corrective actions process refers to the way in which the Laboratory investigates, stabilizes,

  18. Fuel gas conditioning process

    DOE Patents [OSTI]

    Lokhandwala, Kaaeid A.

    2000-01-01

    A process for conditioning natural gas containing C.sub.3+ hydrocarbons and/or acid gas, so that it can be used as combustion fuel to run gas-powered equipment, including compressors, in the gas field or the gas processing plant. Compared with prior art processes, the invention creates lesser quantities of low-pressure gas per unit volume of fuel gas produced. Optionally, the process can also produce an NGL product.

  19. Direct process for explosives

    DOE Patents [OSTI]

    Akst, I.B.; Stinecipher, M.M.

    1982-10-12

    A direct process of making ethylenediamine dinitrate through the reaction of ethylenediamine and ammonium nitrate is described.

  20. Semisolid Metal Processing Consortium

    SciTech Connect (OSTI)

    Apelian,Diran

    2002-01-10

    Mathematical modeling and simulations of semisolid filling processes remains a critical issue in understanding and optimizing the process. Semisolid slurries are non-Newtonian materials that exhibit complex rheological behavior. There the way these slurries flow in cavities is very different from the way liquid in classical casting fills cavities. Actually filling in semisolid processing is often counter intuitive

    1. Innovative Process Technologies

      Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

      Innovative Process Technologies Research Team Members Key Contacts Innovative Process Technologies Innovative Process Technologies is concerned with the development of innovative costeffective technologies that promote efficiency, environmental performance, availability of advanced energy systems, and the development of computational tools that shorten development timelines of advanced energy systems. NETL, working with members of the NETL-Regional University Alliance (NETL-RUA), will focus on

    2. Attenuation of wall disturbances in an electron cyclotron resonance oxygenargon plasma using real time control

      SciTech Connect (OSTI)

      Keville, Bernard, E-mail: bernard.keville@dcu.ie; Gaman, Cezar; Turner, Miles M. [National Centre for Plasma Science and Technology (NCPST), Research and Engineering Building, Dublin City University, Glasnevin, Dublin 9, Ireland and School of Physical Sciences, Dublin City University, Glasnevin, Dublin 9 (Ireland); Zhang, Yang; Daniels, Stephen [National Centre for Plasma Science and Technology (NCPST), Research and Engineering Building, Dublin City University, Glasnevin, Dublin 9, Ireland and School of Electronic Engineering, Dublin City University, Glasnevin, Dublin 9 (Ireland); Holohan, Anthony M. [School of Electronic Engineering, Dublin City University, Glasnevin, Dublin 9 (Ireland)

      2014-07-01

      Present practice in plasma-assisted semiconductor manufacturing specifies recipes in terms of inputs such as gas flow rates, power and pressure. However, ostensibly identical chambers running identical recipes may produce very different results. Extensive chamber matching, i.e., initial iterative, empirical tuning of the process recipe, which entails time-consuming, ex situ statistical analysis of process metrics such as etch depth, uniformity, anisotropy and selectivity, is required to ensure acceptable results. Once matched, chambers are run open loop and are thus sensitive to disturbances such as actuator drift, wall seasoning and substrate loading, which may impact negatively on process reproducibility. An alternative approach, which may obviate the need for chamber matching and reduce the sensitivity of process metrics to exogenous disturbances, would be to specify a recipe in terms of quantities such as active species densities, and to regulate these in real time by adjusting the inputs with a suitable control algorithm. In this work, real time control of an electron cyclotron resonance O{sub 2}/Ar plasma used for photoresist ashing has been implemented. The design of elementary, model-based algorithms for the control of the argon 750 and oxygen 844 line intensities measured by optical emission spectroscopy is described. Fluorination of the chamber walls by means of an SF{sub 6} plasma prior to ashing inhibits wall recombination of oxygen radicals resulting in an approximately 20% increase in ash rate in the open loop case. However, closed loop control almost completely attenuates the effect of fluorination, thus demonstrating the efficacy of the control algorithms in ensuring a reproducible ash rate in the face of a wall disturbance.

    3. Graphical user interface for image acquisition and processing

      DOE Patents [OSTI]

      Goldberg, Kenneth A.

      2002-01-01

      An event-driven GUI-based image acquisition interface for the IDL programming environment designed for CCD camera control and image acquisition directly into the IDL environment where image manipulation and data analysis can be performed, and a toolbox of real-time analysis applications. Running the image acquisition hardware directly from IDL removes the necessity of first saving images in one program and then importing the data into IDL for analysis in a second step. Bringing the data directly into IDL creates an opportunity for the implementation of IDL image processing and display functions in real-time. program allows control over the available charge coupled device (CCD) detector parameters, data acquisition, file saving and loading, and image manipulation and processing, all from within IDL. The program is built using IDL's widget libraries to control the on-screen display and user interface.

    4. Real-time fluid flow model for control of solidification

      SciTech Connect (OSTI)

      Kraftick, K.; Sholl, P.

      1985-07-01

      The Atomic Vapor Laser Isotope Separation (AVLIS) process is an advanced uranium enrichment technology being developed by the Lawrence Livermore National Laboratory. This process is designed to increase the concentration of /sup 235/U in uranium from 0.7% as found in nature to approximately 3% as required for light water nuclear reactor fuel. Separation is accomplished by vaporizing uranium, selectively ionizing /sup 235/U atoms and electromagnetically collecting these ions. The electromagnetic collector system utilizes resistance heaters to maintain a temperature range defined by the melting point of the metal product and tails collected and the materials compatibility limits between the liquid metal and the structure. If temperatures are not within these bounds, metal freezing or structural damage may occur which disrupts the process. Additionally, inappropriate heater usage could result in heater burn-out or overheating.

    5. Real-time wideband cylindrical holographic surveillance system

      DOE Patents [OSTI]

      Sheen, D.M.; McMakin, D.L.; Hall, T.E.; Severtsen, R.H.

      1999-01-12

      A wideband holographic cylindrical surveillance system is disclosed including a transceiver for generating a plurality of electromagnetic waves; antenna for transmitting the electromagnetic waves toward a target at a plurality of predetermined positions in space; the transceiver also receiving and converting electromagnetic waves reflected from the target to electrical signals at a plurality of predetermined positions in space; a computer for processing the electrical signals to obtain signals corresponding to a holographic reconstruction of the target; and a display for displaying the processed information to determine nature of the target. The computer has instructions to apply Fast Fourier Transforms and obtain a three dimensional cylindrical image. 13 figs.

    6. Real-time wideband cylindrical holographic surveillance system

      DOE Patents [OSTI]

      Sheen, David M.; McMakin, Douglas L.; Hall, Thomas E.; Severtsen, Ronald H.

      1999-01-01

      A wideband holographic cylindrical surveillance system including a transceiver for generating a plurality of electromagnetic waves; antenna for transmitting the electromagnetic waves toward a target at a plurality of predetermined positions in space; the transceiver also receiving and converting electromagnetic waves reflected from the target to electrical signals at a plurality of predetermined positions in space; a computer for processing the electrical signals to obtain signals corresponding to a holographic reconstruction of the target; and a display for displaying the processed information to determine nature of the target. The computer has instructions to apply Fast Fourier Transforms and obtain a three dimensional cylindrical image.

    7. Evaluation of steelmaking processes

      SciTech Connect (OSTI)

      Fruehan, R.J.

      1994-01-01

      Objective of the AISI Direct Steelmaking Program is to develop a process for producing steel directly from ore and coal; the process should be less capital intensive, consume less energy, and have higher productivity. A task force was formed to examine available processes: trough, posthearth, IRSID, Electric Arc Furnace, energy optimizing furnace. It is concluded that there is insufficient incentive to replace a working BOF with any of these processes to refine hot metal; however, if new steelmaking capacity is required, IRSID and EOF should be considered. A fully continuous process should not be considered until direct ironmaking and continuous refining are perfected.

    8. Biomass process handbook

      SciTech Connect (OSTI)

      Not Available

      1983-01-01

      Descriptions are given of 42 processes which use biomass to produce chemical products. Marketing and economic background, process description, flow sheets, costs, major equipment, and availability of technology are given for each of the 42 processes. Some of the chemicals discussed are: ethanol, ethylene, acetaldehyde, butanol, butadiene, acetone, citric acid, gluconates, itaconic acid, lactic acid, xanthan gum, sorbitol, starch polymers, fatty acids, fatty alcohols, glycerol, soap, azelaic acid, perlargonic acid, nylon-11, jojoba oil, furfural, furfural alcohol, tetrahydrofuran, cellulose polymers, products from pulping wastes, and methane. Processes include acid hydrolysis, enzymatic hydrolysis, fermentation, distillation, Purox process, and anaerobic digestion.

    9. Soft Expansion of Double-Real-Virtual Corrections to Higgs Production at N$^3$LO

      DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

      Anastasiou, Charalampos; Duhr, Claude; Dulat, Falko; Furlan, Elisabetta; Herzog, Franz; Mistlberger, Bernhard

      2015-05-15

      We present methods to compute higher orders in the threshold expansion for the one-loop production of a Higgs boson in association with two partons at hadron colliders. This process contributes to the N3LO Higgs production cross section beyond the soft-virtual approximation. We use reverse unitarity to expand the phase-space integrals in the small kinematic parameters and to reduce the coefficients of the expansion to a small set of master integrals. We describe two methods for the calculation of the master integrals. The first was introduced for the calculation of the soft triple-real radiation relevant to N3LO Higgs production. The secondmore » uses a particular factorization of the three body phase-space measure and the knowledge of the scaling properties of the integral itself. Our result is presented as a Laurent expansion in the dimensional regulator, although some of the master integrals are computed to all orders in this parameter.« less

    10. Soft Expansion of Double-Real-Virtual Corrections to Higgs Production at N$^3$LO

      SciTech Connect (OSTI)

      Anastasiou, Charalampos; Duhr, Claude; Dulat, Falko; Furlan, Elisabetta; Herzog, Franz; Mistlberger, Bernhard

      2015-05-15

      We present methods to compute higher orders in the threshold expansion for the one-loop production of a Higgs boson in association with two partons at hadron colliders. This process contributes to the N3LO Higgs production cross section beyond the soft-virtual approximation. We use reverse unitarity to expand the phase-space integrals in the small kinematic parameters and to reduce the coefficients of the expansion to a small set of master integrals. We describe two methods for the calculation of the master integrals. The first was introduced for the calculation of the soft triple-real radiation relevant to N3LO Higgs production. The second uses a particular factorization of the three body phase-space measure and the knowledge of the scaling properties of the integral itself. Our result is presented as a Laurent expansion in the dimensional regulator, although some of the master integrals are computed to all orders in this parameter.

    11. Numerical solution of 2D wet steam flow with non-equilibrium condensation and real thermodynamics

      SciTech Connect (OSTI)

      Hric, V.; Halama, J.

      2015-03-10

      An approach to modeling of wet steam flow with non-equilibrium condensation phenomenon is presented. The first part of our flow model is homogeneous Euler system of transport equations for mass, momentum and total energy of wet steam (mixture). The additional second part describes liquid phase via non-homogeneous system of transport equations for moments of droplets number distribution function and relies on corrected classical nucleation theory. Moment equations are closed by linearization of droplet growth rate model. All necessary relations for thermodynamic properties of steam are provided by IAPWS set of equations. However, properties of condensate are simply modeled by liquid saturation data. Two real equations of state are implemented. Recently developed CFD formulation for entropy (does not require iteration process) and so-called IAPWS special gas equation for Helmholtz energy (one iteration loop is necessary). Flow model is validated on converging-diverging supersonic nozzle with Barschdorff geometry. Simulations were performed by in-house CFD code based on finite volume method and stiff character of equations was solved by symmetrical time operator splitting. Achieved results satisfactorily agreed with experimental data.

    12. DESAlert: Enabling real-time transient follow-up with Dark Energy Survey data

      SciTech Connect (OSTI)

      Poci, A.

      2015-04-12

      The Dark Energy Survey (DES) is currently undertaking an observational program imaging 1/4 of the southern hemisphere sky with unprecedented photometric accuracy. In the process of observing millions of faint stars and galaxies to constrain the parameters of the dark energy equation of state, the DES will obtain pre-discovery images of the regions surrounding an estimated 100 gamma-ray bursts (GRBs) over five years. Once GRBs are detected by, e.g., the Swift satellite, the DES data will be extremely useful for follow-up observations by the transient astronomy community. We describe a recently-commissioned suite of software that listens continuously for automated notices of GRB activity, collates useful information from archival DES data, and promulgates relevant data products back to the community in near-real-time. Of particular importance are the opportunities that DES data provide for relative photometry of GRBs or their afterglows, as well as for identifying key characteristics (e.g., photometric redshifts) of potential GRB host galaxies. We provide the functional details of the DESAlert software as it presently operates, as well as the data products that it produces, and we show sample results from the application of DESAlert to several previously-detected GRBs.

    13. Real-Time Noise Reduction for Mossbauer Spectroscopy through Online Implementation of a Modified Kalman Filter

      SciTech Connect (OSTI)

      Abrecht, David G.; Schwantes, Jon M.; Kukkadapu, Ravi K.; McDonald, Benjamin S.; Eiden, Gregory C.; Sweet, Lucas E.

      2015-02-01

      Spectrum-processing software that incorporates a gaussian smoothing kernel within the statistics of first-order Kalman filtration has been developed to provide cross-channel spectral noise reduction for increased real-time signal-to-noise ratios for Mossbauer spectroscopy. The filter was optimized for the breadth of the gaussian using the Mossbauer spectrum of natural iron foil, and comparisons between the peak broadening, signal-to-noise ratios, and shifts in the calculated hyperfine parameters are presented. The results of optimization give a maximum improvement in the signal-to-noise ratio of 51.1% over the unfiltered spectrum at a gaussian breadth of 27 channels, or 2.5% of the total spectrum width. The full-width half-maximum of the spectrum peaks showed an increase of 19.6% at this optimum point, indicating a relatively weak increase in the peak broadening relative to the signal enhancement, leading to an overall increase in the observable signal. Calculations of the hyperfine parameters showed no statistically significant deviations were introduced from the application of the filter, confirming the utility of this filter for spectroscopy applications.

    14. Autonomous real-time detection of plumes and jets from moons and comets

      SciTech Connect (OSTI)

      Wagstaff, Kiri L.; Thompson, David R.; Bue, Brian D.; Fuchs, Thomas J.

      2014-10-10

      Dynamic activity on the surface of distant moons, asteroids, and comets can manifest as jets or plumes. These phenomena provide information about the interior of the bodies and the forces (gravitation, radiation, thermal) they experience. Fast detection and follow-up study is imperative since the phenomena may be time-varying and because the observing window may be limited (e.g., during a flyby). We have developed an advanced method for real-time detection of plumes and jets using onboard analysis of the data as it is collected. In contrast to prior work, our technique is not restricted to plume detection from spherical bodies, making it relevant for irregularly shaped bodies such as comets. Further, our study analyzes raw data, the form in which it is available on board the spacecraft, rather than fully processed image products. In summary, we contribute a vital assessment of a technique that can be used on board tomorrow's deep space missions to detect, and respond quickly to, new occurrences of plumes and jets.

    15. Improved AST's Based on Real World FCV Data | Department of Energy

      Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

      Improved AST's Based on Real World FCV Data Improved AST's Based on Real World FCV Data Presented at the Department of Energy Fuel Cell Projects Kickoff Meeting, September 1 - October 1, 2009 madden_utc_kickoff.pdf (312.69 KB) More Documents & Publications Fuel Cell Projects Kickoff Meeting Accelerated Testing Validation FC-PAD Organization and Activities

    16. Continuous flow PCB radiolysis with real time assessment by gas chromatography

      SciTech Connect (OSTI)

      Bruce J. Mincher; Aaron Ruhter; Rene' Rodriguez; Richard Brey

      2006-05-01

      Recently, the treatment of environmentally recalcitrant pollutants such as PCBs has been studied using a number of so-called, advanced oxidation technologies (AOTs). As a group, the AOTs are ultimate treatment technologies that seek to mineralize the hazardous compounds to be treated (Cooper et al., 2004). One of the most versatile of the AOTs is radiolysis, usually practiced using machine-generated sources of radiation (Cooper et al., 2004, Mincher and Cooper, 2003). The radiolytic decomposition of PCBs has been reviewed (Curry and Mincher, 1999). While earlier experiments have been performed in alkaline isopropanol (Singh et al., 1985, Mucka et al., 1997), recent literature has begun to examine the radiolysis of PCBs in more real-world solvents, such as transformer oil (Arbon and Mincher, 1996, Mincher et al., 2000, Chaychian et al., 1999). These experiments have generally been performed in batch fashion, with small volumes of PCB-contaminated solvents placed in front of a gamma-ray source or the bremmstrahlung or e-beam of an accelerator for predetermined periods of time, to give a desired absorbed dose. These samples were then retrieved to analyze the post-irradiation PCB concentration. We report here what we believe is the first example of the radiolysis of PCBs in a process, continuous flow stream, as opposed to typical batch irradiations. The PCB-containing transformer oil was recirculated through an irradiation cell located in the path of an e-beam. Multiple passes through the cell allowed for the delivery of any desired radiation dose. This system required the development of an on-line analytical system that could provide PCB concentration values in real time. In the current experiment, a pulsed plasma electron capture detector (PDECD) was used in conjunction with a new sample preparation scheme. The new sampling scheme bypasses the need for removal or powering down of the radiation source, which would be undesirable during process PCB treatment

    17. Future Steelmaking Processes

      SciTech Connect (OSTI)

      Prof. R. J. Fruehan

      2004-09-20

      There is an increasing demand for an ironmaking process with lower capital cost, energy consumption and emissions than a blast furnace. It is the hypothesis of the present work that an optimized combination of two reasonable proven technologies will greatly enhance the overall process. An example is a rotary hearth furnace (RHF) linked to a smelter (e.g., AISI, HIsmelt). The objective of this research is to select promising process combinations, develop energy, materials balance and productivity models for the individual processes, conduct a limited amount of basic research on the processes and evaluate the process combinations. Three process combinations were selected with input from the industrial partners. The energy-materials and productivity models for the RHF, smelter, submerged arc furnace and CIRCOFER were developed. Since utilization of volatiles in coal is critical for energy and CO{sub 2} emission reduction, basic research on this topic was also conducted. The process models developed are a major product developed in this research. These models can be used for process evaluation by the industry. The process combinations of an RHF-Smelter and a simplified CIRCOFER-Smelter appear to be promising. Energy consumption is reduced and productivity increased. Work on this project is continuing using funds from other sources.

    18. Two-electron Rabi oscillations in real-time time-dependent density-functional theory

      SciTech Connect (OSTI)

      Habenicht, Bradley F.; Tani, Noriyuki P.; Provorse, Makenzie R.; Isborn, Christine M.

      2014-11-14

      We investigate the Rabi oscillations of electrons excited by an applied electric field in several simple molecular systems using time-dependent configuration interaction (TDCI) and real-time time-dependent density-functional theory (RT-TDDFT) dynamics. While the TDCI simulations exhibit the expected single-electron Rabi oscillations at a single resonant electric field frequency, Rabi oscillations in the RT-TDDFT simulations are a two-electron process. The existence of two-electron Rabi oscillations is determined both by full population inversion between field-free molecular orbitals and the behavior of the instantaneous dipole moment during the simulations. Furthermore, the Rabi oscillations in RT-TDDFT are subject to an intensity threshold of the electric field, below which Rabi oscillations do not occur and above which the two-electron Rabi oscillations occur at a broad range of frequencies. It is also shown that at field intensities near the threshold intensity, the field frequency predicted to induce Rabi oscillations by linear response TDDFT only produces detuned Rabi oscillations. Instead, the field frequency that yields the full two-electron population inversion and Rabi oscillation behavior is shown to be the average of single-electron transition frequencies from the ground S{sub 0} state and the doubly-excited S{sub 2} state. The behavior of the two-electron Rabi oscillations is rationalized via two possible models. The first model is a multi-photon process that results from the electric field interacting with the three level system such that three level Rabi oscillations may occur. The second model suggests that the mean-field nature of RT-TDDFT induces paired electron propagation.

    19. Radiological Monitoring Equipment For Real-Time Quantification Of Area Contamination In Soils And Facility Decommissioning

      SciTech Connect (OSTI)

      M. V. Carpenter; Jay A. Roach; John R Giles; Lyle G. Roybal

      2005-09-01

      The environmental restoration industry offers several sys¬tems that perform scan-type characterization of radiologically contaminated areas. The Idaho National Laboratory (INL) has developed and deployed a suite of field systems that rapidly scan, characterize, and analyse radiological contamination in surface soils. The base system consists of a detector, such as sodium iodide (NaI) spectrometers, a global positioning system (GPS), and an integrated user-friendly computer interface. This mobile concept was initially developed to provide precertifica¬tion analyses of soils contaminated with uranium, thorium, and radium at the Fernald Closure Project, near Cincinnati, Ohio. INL has expanded the functionality of this basic system to create a suite of integrated field-deployable analytical systems. Using its engineering and radiation measurement expertise, aided by computer hardware and software support, INL has streamlined the data acquisition and analysis process to provide real-time information presented on wireless screens and in the form of coverage maps immediately available to field technicians. In addition, custom software offers a user-friendly interface with user-selectable alarm levels and automated data quality monitoring functions that validate the data. This system is deployed from various platforms, depending on the nature of the survey. The deployment platforms include a small all-terrain vehicle used to survey large, relatively flat areas, a hand-pushed unit for areas where manoeuvrability is important, an excavator-mounted system used to scan pits and trenches where personnel access is restricted, and backpack- mounted systems to survey rocky shoreline features and other physical settings that preclude vehicle-based deployment. Variants of the base system include sealed proportional counters for measuring actinides (i.e., plutonium-238 and americium-241) in building demolitions, soil areas, roadbeds, and process line routes at the Miamisburg

    20. Petroleum processing handbook

      SciTech Connect (OSTI)

      McKetta, J.J. )

      1992-01-01

      It is time that many of the petroleum processes currently in use be presented in a well-organized, easy-to-read and understandable manner. This handbook fulfills this need by covering up-to-date processing operations. Each chapter is written by a world expert in that particular area, in such a manner that it is easily understood and applied. The handbook is conveniently divided into four sections: products, refining, manufacturing processes, and treating processes. Each of the processing chapters contain information on plant design as well as significant chemical reactions. Wherever possible, shortcut methods of calculations are included along with nomographic methods of solution. In the front of the book are two convenient sections that will be very helpful to the reader. These are (1) conversion to and from SI units, and (2) cost indexes that will enable the reader to update any cost information. Sections have been processed separately for inclusion on the data base.