Sample records for raw material inputs

  1. Strategic raw material inventory optimization

    E-Print Network [OSTI]

    Vacha, Robin L. (Robin Lee)

    2007-01-01T23:59:59.000Z

    The production of aerospace grade titanium alloys is concentrated in a relatively small number of producers. The market for these materials has always been cyclical in nature. During periods of high demand, metal producers ...

  2. UNIVERSITET Horizon 2020 Climate Action, Resource Efficiency and Raw Materials

    E-Print Network [OSTI]

    "Climate" and the European Innovation Partnerships "Water" and "Raw Materials" - talking with reference:50-13:15 Parallel sessions A. JPI Climate B. EIP Water and Raw Materials Anja Skjoldborg, Environmental Science, JPI. Fighting and adapting to climate change 2. Protection of the environment, sustainable management of natural

  3. agricultural raw materials: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    agricultural raw materials First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Strategic raw material...

  4. Optimal purchasing of raw materials: A data-driven approach

    SciTech Connect (OSTI)

    Muteki, K.; MacGregor, J.F. [McMaster University, Hamilton, ON (Canada). Dept. of Chemical Engineering

    2008-06-15T23:59:59.000Z

    An approach to the optimal purchasing of raw materials that will achieve a desired product quality at a minimum cost is presented. A PLS (Partial Least Squares) approach to formulation modeling is used to combine databases on raw material properties and on past process operations and to relate these to final product quality. These PLS latent variable models are then used in a sequential quadratic programming (SQP) or mixed integer nonlinear programming (MINLP) optimization to select those raw-materials, among all those available on the market, the ratios in which to combine them and the process conditions under which they should be processed. The approach is illustrated for the optimal purchasing of metallurgical coals for coke making in the steel industry.

  5. Access to Critical Raw Materials: A U.S. Perspective Statement of

    E-Print Network [OSTI]

    Access to Critical Raw Materials: A U.S. Perspective Statement of Roderick G. Eggert Professor for current concerns about critical mineral raw materials. Second, I explain the way I view and analyze reggert@mines.edu Before the Public Hearing on "An Effective Raw Materials Strategy for Europe" Committee

  6. Ris-R-1507(EN) Hemp raw materials: The effect of

    E-Print Network [OSTI]

    Risø-R-1507(EN) Hemp raw materials: The effect of cultivar, growth conditions and pretreatment, Søren Rasmussen, Vibeke Bohn, Kristina Vad Nielsen and Anders Thygesen Title: Hemp raw materials Cover : Pages: 30 Tables: 10 References: 24 Abstract: Hemp raw materials were analyzed chemically

  7. An environmental impact assessment of quantum dot photovoltaics (QDPV) from raw material acquisition through use

    E-Print Network [OSTI]

    Illinois at Chicago, University of

    An environmental impact assessment of quantum dot photovoltaics (QDPV) from raw material of Environmental Engineering, Beytepe, Ankara, Turkey b Institute for Environmental Science and Policy, University: Life cycle assessment Quantum dots Nanophotovoltaics Quantum dot photovoltaic modules Solar energy

  8. Discriminative Illumination: Per-Pixel Classification of Raw Materials based on Optimal Projections of Spectral BRDF

    E-Print Network [OSTI]

    Gu, Jinwei

    Discriminative Illumination: Per-Pixel Classification of Raw Materials based on Optimal Projections training samples, after projecting to which, the spectral reflectance of different materials are maximally--is learned from training samples, after projecting to which, the spectral BRDFs of different materials can

  9. RAW MATERIALS USED FOR THE PHOSPHATE FERTILIZER PRODUCTION IN ROMANIA -NEW RADIOMETRIC DATA

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    gamma spectrometry in natural apatites used as raw materials in the phosphate fertilizer industry, thorium and potassium by low background gamma spectrometry with HPGe detector is a simple determination of uranium, thorium and potassium, up to very low limits (under 0.1 ppm). The Gamma spectrometric

  10. AS A MINING ENGINEER Mining provides the raw materials and energy resources needed to sustain modern civilization. Mining Engineers

    E-Print Network [OSTI]

    Simons, Jack

    AS A MINING ENGINEER Mining provides the raw materials and energy resources needed to sustain modern civilization. Mining Engineers are trained to determine the safest most sustainable way to remove for energy and mineral resources. The average American consumes approximately 45,000 pounds of minerals

  11. EMBARGOED 00h00 -6 March 2007 Brussels, 5 March 2007 European Energy Policy puts industries using renewable raw materials at risk

    E-Print Network [OSTI]

    of renewable energy as well as the mobilisation of biomass resources. Conflicts between different uses production should be a priority and should be monitored in order to optimise the use of renewable resources renewable raw materials at risk The European industries using renewable raw materials from agriculture

  12. The viscoelastic behaviour of raw and anaerobic digested sludge: strong similarities with soft-glassy materials

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    1 The viscoelastic behaviour of raw and anaerobic digested sludge: strong similarities with soft confronted with a dramatically increasing flow of sewage sludge. To improve treatment efficiency, process reliable flow properties to simulate the process, this work is an attempt to approach sludge rheological

  13. A new copper borophosphate with novel polymeric chains and its structural correlation with raw materials in molten hydrated flux synthesis

    SciTech Connect (OSTI)

    Duan, Ruijing; Liu, Wei, E-mail: Weiliu@ouc.edu.cn; Cao, Lixin; Su, Ge; Xu, Hongmei; Zhao, Chenggong

    2014-02-15T23:59:59.000Z

    A novel copper borophosphate, Cu{sub 3}[B{sub 2}P{sub 3}O{sub 12}(OH){sub 3}] has been prepared by the molten hydrated flux method. Its crystal structure was determined by the single-crystal X-ray diffraction (monoclinic, Cc, a=6.1895 , b=13.6209 , c=11.9373 , ?=97.62, V=997.5 {sup 3}, Z=4). The three-dimensional framework of the titled compound, is composed by two kinds of polymeric chains and isolated PO{sub 4} tetrahedral. One novel 4-membered tetrahedral rings has been observed in borophosphates. Magnetic measurements indicate that the title compound exits antiferromagnetic interactions. Due to the special reaction medium created by the molten hydrated flux method, a possible structural correlation between the final solids and the raw materials has been noted. - Graphical abstract: The 3D structure consists of a framework composed of CuO{sub x} polyhedra, BO{sub 4} and PO{sub 4} tetrahedra. A intersection angle between the metal chains and borophosphate chains can be noted. Display Omitted - Highlights: A novel copper borophosphate has been prepared by the molten hydrated flux method. One novel 4-membered tetrahedral ring has been observed firstly in borophosphates. A possible structural correlation between the final solids and the raw materials has been noted.

  14. Measuring the erodibility of soil materials constituting earth embankments: a key input for dams and levees

    E-Print Network [OSTI]

    Boyer, Edmond

    Measuring the erodibility of soil materials constituting earth embankments: a key input for dams of hydraulic embankment structures, including earth embankment dams, levees and dykes, is a major concern all over the world. Still today, about one to two large dams fail every year and hundreds, probably

  15. Supply chain management (SCM) involves the management of materials and information across the entire supply chain. This includes raw material

    E-Print Network [OSTI]

    Calgary, University of

    Supply chain management (SCM) involves the management of materials and information across this concentration will be required to take three core courses: Materials and Supply Chain Management, Transportation Purchasing identify global sources of materials, select vendors, and manage negotiati

  16. Economics is the study of choices. Economics programs teach people how society distributes scarce resources, such as land, labor, raw materials, and

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    Economics is the study of choices. Economics programs teach people how society distributes scarce resources, such as land, labor, raw materials, and machinery. Economics is also about much more than this. Using the tools of economics, students can better understand all kinds of choices and outcomes, ranging

  17. Metabolic Noise, Vestigial Metabolites or the Raw Material of Ecological Adaptation? Opportunitistic Enzymes, Catalytic Promiscuity and the Evolution of chemodiversity in Nature (2010 JGI User Meeting)

    ScienceCinema (OSTI)

    Noel, Joseph

    2011-04-25T23:59:59.000Z

    Joseph Noel from the Salk Institute on "Metabolic Noise, Vestigial Metabolites or the Raw Material of Ecological Adaptation? Enzymes, Catalytic Promiscuity and the Evolution of Chemodiversity in Nature" on March 26, 2010 at the 5th Annual DOE JGI User Meeting

  18. Background radioactivity of construction materials, raw substance and ready-made CaMoO4 crystals

    E-Print Network [OSTI]

    Busanov, O A; Gavriljuk, Yu M; Gezhaev, A M; Kazalov, V V; Kornoukhov, V N; Kuzminov, V V; Moseev, P S; Panasenko, S I; Ratkevich, S S; Yakimenko, S P

    2013-01-01T23:59:59.000Z

    The results of measurements of natural radioactive isotopes content in different source materials of natural and enriched composition used for CaMoO4 scintillation crystal growing are presented. The crystals are to be used in the experiment to search for double neutrinoless betas-decay of Mo-100.

  19. Improvement of granulation of raw material by using the high-agitating mixer at Kokura No. 3 sintering plant

    SciTech Connect (OSTI)

    Hadano, Yasuhiko; Murai, Tatsunori; Kawaguchi, Yosizumi; Komatsu, Shusaku; Sasakawa, Akira; Kawaguchi, Takazo; Matsumura, Masaru

    1995-12-01T23:59:59.000Z

    Recently, there have been experiments aimed at increasing the pulverized coal injection rate of a blast furnace. When increasing the pulverized coal injection rate, the gas permeability resistance in a blast furnace increases. One of the methods to decrease the gas permeability resistance in a blast furnace is to use an iron ore burden with high iron content and low slag volume. However, the problem of resource drain has already occurred in the hematite deposit in West Australia, which is the principal supplier of a good quality lumpy iron ore. As a result, pellet feed iron ore must be selected as its substitute. In this paper, the authors investigated a granulation technique for producing an iron ore sinter with high iron content and low slag volume. In addition, they developed the granulation technique of agitating materials and water at high speed. It was used in Kokura No. 3 Sinter Plant.

  20. Reinforcement learning with raw image pixels as input state

    E-Print Network [OSTI]

    Wehenkel, Louis

    Science Institut Montefiore - University of Li`ege Sart-Tilman B28 - B4000 Li`ege - Belgium Postdoctoral

  1. Critical Materials:

    Broader source: Energy.gov (indexed) [DOE]

    lighting. 14 (bottom) Criticality ratings of shortlisted raw 76 materials. 15 77 2. Technology Assessment and Potential 78 This section reviews the major trends within...

  2. Bayesian inference algorithm on Raw

    E-Print Network [OSTI]

    Luong, Alda

    2004-01-01T23:59:59.000Z

    This work explores the performance of Raw, a parallel hardware platform developed at MIT, running a Bayesian inference algorithm. Motivation for examining this parallel system is a growing interest in creating a self-learning ...

  3. Supplying High-Quality, Raw Biomass

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Supplying High-Quality, Raw Biomass The building blocks to supply high-quality raw biomass start with harvesting and collection practices, product storage and recommendations of...

  4. Conversion of raw carbonaceous fuels

    DOE Patents [OSTI]

    Cooper, John F. (Oakland, CA)

    2007-08-07T23:59:59.000Z

    Three configurations for an electrochemical cell are utilized to generate electric power from the reaction of oxygen or air with porous plates or particulates of carbon, arranged such that waste heat from the electrochemical cells is allowed to flow upwards through a storage chamber or port containing raw carbonaceous fuel. These configurations allow combining the separate processes of devolatilization, pyrolysis and electrochemical conversion of carbon to electric power into a single unit process, fed with raw fuel and exhausting high BTU gases, electric power, and substantially pure CO.sub.2 during operation.

  5. Raw fabric hardware implementation and characterization

    E-Print Network [OSTI]

    Sun, Albert (Albert G.)

    2006-01-01T23:59:59.000Z

    The Raw architecture is scalable, improving performance not by pushing the limits of clock frequency, but by spreading computation across numerous simple, replicated tiles. The first Raw processors fabricated have 16 RISC ...

  6. TART input manual

    SciTech Connect (OSTI)

    Kimlinger, J.R.; Plechaty, E.F.

    1982-04-01T23:59:59.000Z

    The TART code is a Monte Carlo neutron/photon transport code that is only on the CRAY computer. All the input cards for the TART code are listed, and definitions for all input parameters are given. The execution and limitations of the code are described, and input for two sample problems are given. (WHK)

  7. Meats & Products Agricultural Inputs

    E-Print Network [OSTI]

    Collett Jr., Jeffrey L.

    Meats & Products Agricultural Inputs Processing Idaho B20 C C B Meats and Livestock Products Index to agriculture? Legend Overall weighted grade Weighted rank Northwest Midwest Southwest East Meats & ProductsProcessingessing Maine B11 B A A Meats & Products Agricultural Inputs Processing New York F49 F F F soductsoducts

  8. SRS Interface Input

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Interface Input 1. MOA's: The contractor has no MOA's in effect at the Tritium Operations (SRTO) level. 2. AIP's: The contractor has no AIP's in effect at the SRTO level. 3....

  9. Fissile Material Disposition Program: Deep Borehole Disposal Facility PEIS data input report for direct disposal. Direct disposal of plutonium metal/plutonium dioxide in compound metal canisters. Version 3.0

    SciTech Connect (OSTI)

    Wijesinghe, A.M.; Shaffer, R.J.

    1996-01-15T23:59:59.000Z

    The US Department of Energy (DOE) is examining options for disposing of excess weapons-usable nuclear materials [principally plutonium (Pu) and highly enriched uranium (HEU)] in a form or condition that is substantially and inherently more difficult to recover and reuse in weapons production. This report is the data input report for the Programmatic Environmental Impact Statement (PEIS). The PEIS examines the environmental, safety, and health impacts of implementing each disposition alternative on land use, facility operations, and site infrastructure; air quality and noise; water, geology, and soils; biotic, cultural, and paleontological resources; socioeconomics; human health; normal operations and facility accidents; waste management; and transportation. This data report is prepared to assist in estimating the environmental effects associated with the construction and operation of a Deep Borehole Disposal Facility, an alternative currently included in the PEIS. The facility projects under consideration are, not site specific. This report therefore concentrates on environmental, safety, and health impacts at a generic site appropriate for siting a Deep Borehole Disposal Facility.

  10. Optimal Control of Raw Timber Production Processes

    E-Print Network [OSTI]

    Standiford, Richard B.

    of development of the society imposes demands on the planning and control of production processes in the formOptimal Control of Raw Timber Production Processes Ivan Kolenka Abstract: This paper demonstrates the possibility of optimal planning and control of timber harvesting activ- ities with mathematical optimization

  11. Raw material preparation for ultra high production rate sintering

    SciTech Connect (OSTI)

    Kortmann, H.A.; Ritz, V.J. [Studiengesellschaft fuer Eisenerzaufbereitung, Liebenburg-Othfresen (Germany); Cappel, F.; Weisel, H.; Richter, G. [LURGI AG, Frankfurt (Germany)

    1995-12-01T23:59:59.000Z

    An R and D program in pot grate sintering showed, that an intensive preparation of ores, additives and coke breeze improves the sintering capacity. The tests were conducted using an ore mixture composed of typical ores imported to Europe. The highest capacities were attained up to 63.8 t/m{sup 2} {times} 24 h maximum for a sinter which well fulfills the high requirements on chemical, physical and metallurgical properties.

  12. CO2 as a raw material for chemistry : an

    E-Print Network [OSTI]

    Canet, Lonie

    to chemical products capable of being energy vectors (CH3OH, CH3OCH3, EtOH, ... ) Access to chemical intermediates from biomass CO2 accelerates production of biomass Ex microalgae biofuel, chemicals, .. Ex energy: 803 kJ/mol ( 192 kcal/mol) #12;Paris, 09/07/20139 Chemical valorisations : an industrial

  13. Gen Inputs Settlement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist.Newof EnergyFunding OpportunityF2015Gen-Inputs-Settlement Sign

  14. Nonwoven Materials: Challenges for the Medical and

    E-Print Network [OSTI]

    Li, Mo

    technology. Innovation Product MaterialProcess Voice of the Customer #12;Challenge 2: Raw Material Cost Material Costs Scale (Prototype to Commercialization) Conclusions Questions #12;Kimberly-like barrier #12;Technology Evolution + Vision + Risk = Disruptive Technology Spunbond Business Enabling SMS

  15. RawSolar | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-f < RAPID‎ | Roadmap Jump to:bJump to: navigation, searchRavenRawSolar

  16. Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated Codes |IsLove Your Home andDisposition | NationalMaterials

  17. Evaluating the End-of-Life Phase of Consumer Electronics:Methods and Tools to Improve Product Design and Material Recovery

    E-Print Network [OSTI]

    Mangold, Jennifer Ann

    2013-01-01T23:59:59.000Z

    2012. [42] Committee on Critical Materials in Impacts on the30] F. Verhaeghe. Critical raw materials not your problem?and D. Pingel. Recycling critical raw materials from waste

  18. Description & Careers Supply Chain Management is how business gets done. Supply chain management spans all movement and storage of raw

    E-Print Network [OSTI]

    Lin, Xiaodong

    management spans all movement and storage of raw materials, work-in-process inventory, and finished goods of supply chains, resource managers of material or manufacturing resources planning (MRP), and processDescription & Careers The Field Supply Chain Management is how business gets done. Supply chain

  19. Description & Careers Supply Chain Management is how business gets done. Supply chain management spans all movement and storage of raw

    E-Print Network [OSTI]

    Lin, Xiaodong

    management spans all movement and storage of raw materials, work-in-process inventory, and finished goods managers of supply chains, resource managers of material or manufacturing resources planning (MRPDescription & Careers The Field Supply Chain Management is how business gets done. Supply chain

  20. Serial Input Output

    SciTech Connect (OSTI)

    Waite, Anthony; /SLAC

    2011-09-07T23:59:59.000Z

    Serial Input/Output (SIO) is designed to be a long term storage format of a sophistication somewhere between simple ASCII files and the techniques provided by inter alia Objectivity and Root. The former tend to be low density, information lossy (floating point numbers lose precision) and inflexible. The latter require abstract descriptions of the data with all that that implies in terms of extra complexity. The basic building blocks of SIO are streams, records and blocks. Streams provide the connections between the program and files. The user can define an arbitrary list of streams as required. A given stream must be opened for either reading or writing. SIO does not support read/write streams. If a stream is closed during the execution of a program, it can be reopened in either read or write mode to the same or a different file. Records represent a coherent grouping of data. Records consist of a collection of blocks (see next paragraph). The user can define a variety of records (headers, events, error logs, etc.) and request that any of them be written to any stream. When SIO reads a file, it first decodes the record name and if that record has been defined and unpacking has been requested for it, SIO proceeds to unpack the blocks. Blocks are user provided objects which do the real work of reading/writing the data. The user is responsible for writing the code for these blocks and for identifying these blocks to SIO at run time. To write a collection of blocks, the user must first connect them to a record. The record can then be written to a stream as described above. Note that the same block can be connected to many different records. When SIO reads a record, it scans through the blocks written and calls the corresponding block object (if it has been defined) to decode it. Undefined blocks are skipped. Each of these categories (streams, records and blocks) have some characteristics in common. Every stream, record and block has a name with the condition that each stream, record or block name must be unique in its category (i.e. all streams must have different names, but a stream can have the same name as a record). Each category is an arbitrary length list which is handled by a 'manager' and there is one manager for each category.

  1. Input a journal Viewing Journals

    E-Print Network [OSTI]

    Sussex, University of

    Journals Contents: Input a journal Viewing Journals Deleting a journal Entering jnl into different period Problems Input a journal 1 Login to Bluqube 2 Select 3 Enter relevant Doc type To select the number of journals you will processing & the total credit value 6 Click on 7 Enter brief description 8

  2. Exploring Optimal Cost-Performance Designs for Raw Microprocessors

    E-Print Network [OSTI]

    Yeung, Donald

    Exploring Optimal Cost-Performance Designs for Raw Microprocessors Csaba Andras Moritz Donald Yeung. The MIT Raw microprocessor is a proposed architec- ture that strives to exploit these chip-level resources microprocessors fully expose their internal hardware structure to the software, they can be viewed as a gi- gantic

  3. Exploring Optimal CostPerformance Designs for Raw Microprocessors

    E-Print Network [OSTI]

    Yeung, Donald

    Exploring Optimal Cost­Performance Designs for Raw Microprocessors Csaba Andras Moritz Donald Yeung. The MIT Raw microprocessor is a proposed architec­ ture that strives to exploit these chip­level resources microprocessors fully expose their internal hardware structure to the software, they can be viewed as a gi­ gantic

  4. assess material compatibility: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    from raw material: Life cycle assessment Quantum dots Nanophotovoltaics Quantum dot photovoltaic modules Solar energy Assessment (LCA) of a proposed type of nanophotovoltaic,...

  5. Fissile Material Disposition Program: Deep borehole disposal Facility PEIS date input report for immobilized disposal. Immobilized disposal of plutonium in coated ceramic pellets in grout with canisters. Version 3.0

    SciTech Connect (OSTI)

    Wijesinghe, A.M.; Shaffer, R.J.

    1996-01-15T23:59:59.000Z

    Following President Clinton`s Non-Proliferation Initiative, launched in September, 1993, an Interagency Working Group (IWG) was established to conduct a comprehensive review of the options for the disposition of weapons-usable fissile materials from nuclear weapons dismantlement activities in the United States and the former Soviet Union. The IWG review process will consider technical, nonproliferation, environmental budgetary, and economic considerations in the disposal of plutonium. The IWG is co-chaired by the White House Office of Science and Technology Policy and the National Security Council. The Department of Energy (DOE) is directly responsible for the management, storage, and disposition of all weapons-usable fissile material. The Department of Energy has been directed to prepare a comprehensive review of long-term options for Surplus Fissile Material (SFM) disposition, taking into account technical, nonproliferation, environmental, budgetary, and economic considerations.

  6. Materials Analyst -Federal-Mogul Corporation -Skokie Plant The Material Analyst is responsible for procuring materials to support the manufacturing

    E-Print Network [OSTI]

    Heller, Barbara

    Materials Analyst - Federal-Mogul Corporation - Skokie Plant The Material Analyst is responsible for procuring materials to support the manufacturing function by maintaining raw material levels that ensure and utilize inventory system to analyze material requirements to ensure proper inventory levels. 2. Place

  7. Analysis of the raw data of sample plots in NFIMAP Cycle IV ...

    Open Energy Info (EERE)

    Available Website: www.leafasia.orglibraryusaid-leaf-analysis-raw-date-sample-plots-nfi Cost: Free Language: English Logo: Analysis of the raw data of sample plots in NFIMAP...

  8. Input Validation Errors and Defenses

    E-Print Network [OSTI]

    Sekar, R.

    = "gpg -r $send_to_list 2>&1" popen($command) Attack: user fills in the following information-independent policies are preferable Example: SquirrelMail Command Injection Incoming Request (Untrusted input) $command="gpg popen($command) $send_to_list = $_GET[`sendto'] $command = "gpg -r $send_to_list 2>&1" Outgoing Request

  9. User's guide for ALEX: uncertainty propagation from raw data to final results for ORELA transmission measurements

    SciTech Connect (OSTI)

    Larson, N.M.

    1984-02-01T23:59:59.000Z

    This report describes a computer code (ALEX) developed to assist in AnaLysis of EXperimental data at the Oak Ridge Electron Linear Accelerator (ORELA). Reduction of data from raw numbers (counts per channel) to physically meaningful quantities (such as cross sections) is in itself a complicated procedure; propagation of experimental uncertainties through that reduction procedure has in the past been viewed as even more difficult - if not impossible. The purpose of the code ALEX is to correctly propagate all experimental uncertainties through the entire reduction procedure, yielding the complete covariance matrix for the reduced data, while requiring little additional input from the eperimentalist beyond that which is required for the data reduction itself. This report describes ALEX in detail, with special attention given to the case of transmission measurements (the code itself is applicable, with few changes, to any type of data). Application to the natural iron measurements of D.C. Larson et al. is described in some detail.

  10. Upgrading of raw oil into advanced fuel. Task 5

    SciTech Connect (OSTI)

    Not Available

    1991-10-01T23:59:59.000Z

    The overall objective of the research effort is the determination of the minimum processing requirements to produce high energy density fuels (HEDF) having acceptable fuel specifications. The program encompasses assessing current technology capability; selecting acceptable processing and refining schemes; and generating samples of advanced test fuels. The Phase I Baseline Program is intended to explore the processing alternatives for producing advanced HEDF from two raw synfuel feedstocks, one from Mild Coal Gasification as exemplified by the COALITE process and one from Colorado shale oil. Eight key tasks have been identified as follows: (1) Planning and Environmental Permitting; (2) Transporting and Storage of Raw Fuel Sources and Products; (3) Screening of Processing and Upgrading Schemes; (4) Proposed Upgrading Schemes for Advanced Fuel; (5) Upgrading of Raw Oil into Advanced Fuel (6) Packaging and Shipment of Advanced Fuels; (7) Updated Technical and Economic Assessment; and, (8) Final Report of Phase I Efforts. This topical report summarizes the operations and results of the Phase I Task 5 sample preparation program. The specific objectives of Task 5 were to: Perform laboratory characterization tests on the raw COALITE feed, the intermediate liquids to the required hydroprocessing units and final advanced fuels and byproducts; and produce a minimum of 25-gal of Category I test fuel for evaluation by DOE and its contractors.

  11. Recommendation 177: Facilitating Early Public Input

    Broader source: Energy.gov [DOE]

    DOE should initiate consultation meetings with stake holders immediately to allow early public input into the planning for IFDP

  12. Countering Poisonous Inputs with Memetic Neuroevolution

    E-Print Network [OSTI]

    Togelius, Julian

    Countering Poisonous Inputs with Memetic Neuroevolution Julian Togelius1 , Tom Schaul1 , J-dimensional and/or ill-chosen state description. Evidently, some controller inputs are "poisonous also ex- plore which types of inputs are poisonous for two different reinforcement learning problems. 1

  13. Future designs of raw-gas conversion systems

    SciTech Connect (OSTI)

    Colton, J.W.; Fleming, D.K.

    1981-01-01T23:59:59.000Z

    Many different processes are available to convert raw gas to substitute natural gas (SNG). Several additional processes have been proposed and are now in development. An Institute of Gas Technology (IGT) computer program assesses the efficiency of various raw-gas conversion processes for the recovery of high-temperature enthalpy and the net export of high-pressure steam. The steam balance is a prime measure of economic attractiveness of the alternative processes. Of the currently available processes, the sequence that uses sour-gas shift followed by conventional cold sweetening and nickel-based multistage methanation is preferred. Certain novel process concepts beginning with sour-gas shift and hot-gas carbon dioxide removal should be a significant improvement. The improved processes will require either sulfur-tolerant methanation or hot-gas sulfur removal plus conventional methanation. In either case, the gas would not be cooled to room temperature before being entirely converted to methane.

  14. US Nuclear Regulatory Commission Input to DOE Request for Information...

    Energy Savers [EERE]

    US Nuclear Regulatory Commission Input to DOE Request for Information Smart Grid Implementation Input US Nuclear Regulatory Commission Input to DOE Request for Information Smart...

  15. Code input alternatives John C. Wright

    E-Print Network [OSTI]

    Wright, John C.

    Code input alternatives John C. Wright John Wright Oct 2009 CSWIM Workshop@ORNL Extensible markup, #type, #value, #units, #help idebug, logical, 1, "", "Turn;Summary Use a data-centric model for input creation (code namelists, IPS config file, etc) Database

  16. U-147:Red Hat Enterprise MRG Grid Input Validation Flaw

    Broader source: Energy.gov [DOE]

    The MRG Management Console (Cumin) does not properly filter HTML code from user-supplied input before displaying the input.

  17. Analyses of Hydrogen Storage Materials and On-Board Systems

    Broader source: Energy.gov (indexed) [DOE]

    for the manufacture of the tank, so no mark-up is included on those components Raw materials and BOP components are assumed to be purchased by the OEM and therefore include...

  18. HIGH TEMPERATURE ELECTROLYZER MATERIALS PROJECT GOAL

    E-Print Network [OSTI]

    Mease, Kenneth D.

    a fuel for the SOFC itself, as a fuel for other devices (e.g., fuel cell vehicles), or as a raw material with compatible electrodes to develop reversible solid oxide fuel cells for low-cost, high efficient power fuel cell concept has been proven, no complete reversible fuel cell materials set has yet been

  19. Generation of RTL verification input stimulus

    E-Print Network [OSTI]

    Selvarathinam, Anand Manivannan

    2001-01-01T23:59:59.000Z

    This thesis presents an approach for generating input stimulus for verification of register-transfer level (RTL) design of VLSI circuits. RTL design is often subjected to a significant verification effort due to errors introduced during manual...

  20. RAW MATERIALS EVALUATION AND PROCESS DEVELOPMENT STUDIES FOR CONVERSION OF BIOMASS TO SUGARS AND ETHANOL

    E-Print Network [OSTI]

    Wilke, C.R.

    2011-01-01T23:59:59.000Z

    OF BIOMASS TO SUGARS AND ETHANOL C. R. Wilke, R. D. Yang,of Cellulose Conversion on Ethanol Cost. References Wilke,of Hydrolyzate to Ethanol and Single Cell Protein,"

  1. Effects of Non-Fish Based Raw Materials on the Fish Muscle Quality of

    E-Print Network [OSTI]

    towards more sustainable. This thesis investigated the effects of sesamin, linseed oil (LO), rapeseed oil (RO), krill oil (KO), krill meal (KM), mussel meal (MM), and zygomycete meal (ZM) (Rhizopus oryzae of astaxanthin showed high level of oxidation products (thiobarbituric reactive substances). Sesamin and ZM

  2. RAW MATERIALS EVALUATION AND PROCESS DEVELOPMENT STUDIES FOR CONVERSION OF BIOMASS TO SUGARS AND ETHANOL

    E-Print Network [OSTI]

    Wilke, C.R.

    2011-01-01T23:59:59.000Z

    first stage. passed through a centrifuge to the first stage.A portion of the centrifuge underflow is filtered and theunnecessary because The centrifuge overflow will contain a

  3. Lean manufacturing in a mass customization plant : improved efficiencies in raw material presentation

    E-Print Network [OSTI]

    Daneshmand, Moojan

    2011-01-01T23:59:59.000Z

    This thesis focuses on the application of the principles of lean manufacturing at Varian Semiconductor Equipment Associates (VSEA). The company faces the challenges of highly customized assembly as well as fluctuating ...

  4. The study of inventory management of raw materials for a pharmaceutical company

    E-Print Network [OSTI]

    Khor, Si Ming Thomas

    2007-01-01T23:59:59.000Z

    TCG is a multinational pharmaceutical company. As part of its drive to adopt lean manufacturing methodology in the plant and to stay competitive in the industry, TCG plans to effectively maximize its capital assets and ...

  5. Spatial and Temporal Variation in Stone Raw Material Provisioning in the Chivay Obsidian Source Area

    E-Print Network [OSTI]

    Tripcevich, Nicholas; MacKay, Alex

    2012-01-01T23:59:59.000Z

    we go: A llama caravan in Bolivia. Llama World Spring:1015.Interaction in Peru and Bolivia LBL6343. Lawrence BerkeleyPeru and northern Bolivia. Journal of World Prehistory 14(

  6. 1. What is the problem? Lack of secure supply chains for some raw materials cri

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch >Internship ProgramBiomassUniversityNuclearIBM8)4-08) SECTION. What is

  7. Total Blender Net Input of Petroleum Products

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are nowTotal" (Percent) Type: Sulfur Content API GravityDakota" "Fuel, quality", 2013,Iowa"Dakota"YearProductionShaleInput Product: Total Input Natural

  8. Comparison of environmental impacts of steel and concrete as building materials using the Life Cycle Assessment method

    E-Print Network [OSTI]

    Johnson, Timothy Werner

    2006-01-01T23:59:59.000Z

    In the United States, the construction industry accounts for almost 75% of total raw material used. This is an obvious drain on natural resources and has a major impact on the surrounding environment. Construction materials ...

  9. Green Computing input for better outcomes

    E-Print Network [OSTI]

    Amir, Yair

    Journal Profile: Udi Dahan Green Maturity Model for Virtualization Profiling Energy Usage for Efficient suggests that tracking energy consumption at every level will become the factor of success for greenGreen Computing input for better outcomes Learn the discipline, pursue the art, and contribute

  10. SWAT 2012 Input/Output Documentation

    E-Print Network [OSTI]

    Arnold, J.G.; Kiniry, J.R.; Srinivasan, R.; Williams, J.R.; Haney, E.B.; Neitsch, S.L.

    2013-03-04T23:59:59.000Z

    The Soil and Water Assessment Tool (SWAT) is a comprehensive model that requires a diversity of information in order to run. Novice users may feel overwhelmed by the variety and number of inputs when they first begin to use the model. This document...

  11. Consanguine Calculations Input File: blood.in

    E-Print Network [OSTI]

    California at Berkeley, University of

    1 of 20 Problem A+ Consanguine Calculations Input File: blood.in Every person's blood has 2 markers in a particular ABO blood type for that person. Combination ABO Blood Type AA A AB AB AO A BB B BO B OO O Likewise, every person has two alleles for the blood Rh factor, represented by the characters + and -. Someone who

  12. Asynchronous vs Synchronous Input-Queued Switches

    E-Print Network [OSTI]

    of high-performance switches. 1 INTRODUCTION A vast technical literature exists on input-queued (IQ to performance losses in comparison with synchronous cell switching, these losses are limited, and may be smaller than the losses due to the above-mentioned segmenta- tion/reassembly overheads. In real scenarios

  13. Asynchronous vs Synchronous Input-Queued Switches

    E-Print Network [OSTI]

    for the design of high-performance switches. I. INTRODUCTION A vast technical literature exists on input. Unfortunately the technical literature has largely neglected this situation, and concentrated the attention throughput, or to simpler scheduling. Even when the asynchronous operation leads to performance losses

  14. U-252: Barracuda Web Filter Input Validation Flaws Permit Cross...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2: Barracuda Web Filter Input Validation Flaws Permit Cross-Site Scripting Attacks U-252: Barracuda Web Filter Input Validation Flaws Permit Cross-Site Scripting Attacks September...

  15. T-623: HP Business Availability Center Input Validation Hole...

    Broader source: Energy.gov (indexed) [DOE]

    3: HP Business Availability Center Input Validation Hole Permits Cross-Site Scripting Attacks T-623: HP Business Availability Center Input Validation Hole Permits Cross-Site...

  16. V-139: Cisco Network Admission Control Input Validation Flaw...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    9: Cisco Network Admission Control Input Validation Flaw Lets Remote Users Inject SQL Commands V-139: Cisco Network Admission Control Input Validation Flaw Lets Remote Users Inject...

  17. USDA, Departments of Energy and Navy Seek Input from Industry...

    Office of Environmental Management (EM)

    Departments of Energy and Navy Seek Input from Industry to Advance Biofuels for Military and Commercial Transportation USDA, Departments of Energy and Navy Seek Input from Industry...

  18. U-219: Symantec Web Gateway Input Validation Flaws Lets Remote...

    Broader source: Energy.gov (indexed) [DOE]

    9: Symantec Web Gateway Input Validation Flaws Lets Remote Users Inject SQL Commands, Execute Arbitrary Commands, and Change User Passwords U-219: Symantec Web Gateway Input...

  19. Systems and methods for predicting materials properties

    DOE Patents [OSTI]

    Ceder, Gerbrand (Wellesley, MA); Fischer, Chris (Somerville, MA); Tibbetts, Kevin (Winchester, MA); Morgan, Dane (Madison, WI); Curtarolo, Stefano (Durham, NC)

    2007-11-06T23:59:59.000Z

    Systems and methods for predicting features of materials of interest. Reference data are analyzed to deduce relationships between the input data sets and output data sets. Reference data includes measured values and/or computed values. The deduced relationships can be specified as equations, correspondences, and/or algorithmic processes that produce appropriate output data when suitable input data is used. In some instances, the output data set is a subset of the input data set, and computational results may be refined by optionally iterating the computational procedure. To deduce features of a new material of interest, a computed or measured input property of the material is provided to an equation, correspondence, or algorithmic procedure previously deduced, and an output is obtained. In some instances, the output is iteratively refined. In some instances, new features deduced for the material of interest are added to a database of input and output data for known materials.

  20. Validation of Innovative Exploration Technologies for Newberry Volcano: Raw data used to prepare the Gravity Report by Zonge 2012

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Jaffe, Todd

    Validation of Innovative Exploration Technologies for Newberry Volcano: Raw data used to prepare the Gravity Report by Zonge 2012

  1. Validation of Innovative Exploration Technologies for Newberry Volcano: Seismic data - raw taken by Apex Hipoint for 1st test 2012

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Jaffe, Todd

    Validation of Innovative Exploration Technologies for Newberry Volcano: Seismic data - raw taken by Apex Hipoint for 1st test 2012

  2. Validation of Innovative Exploration Technologies for Newberry Volcano: Seismic data - raw taken by Apex Hipoint for 1st test 2012

    SciTech Connect (OSTI)

    Jaffe, Todd

    2012-01-01T23:59:59.000Z

    Validation of Innovative Exploration Technologies for Newberry Volcano: Seismic data - raw taken by Apex Hipoint for 1st test 2012

  3. Raw neutron scattering data for strain measurement of hydraulically loaded granite and marble samples in triaxial stress state

    SciTech Connect (OSTI)

    Polsky, Yarom

    2014-05-23T23:59:59.000Z

    This entry contains raw data files from experiments performed on the Vulcan beamline at the Spallation Neutron Source at Oak Ridge National Laboratory using a pressure cell. Cylindrical granite and marble samples were subjected to confining pressures of either 0 psi or approximately 2500 psi and internal pressures of either 0 psi, 1500 psi or 2500 psi through a blind axial hole at the center of one end of the sample. The sample diameters were 1.5" and the sample lengths were 6". The blind hole was 0.25" in diameter and 3" deep. One set of experiments measured strains at points located circumferentially around the center of the sample with identical radii to determine if there was strain variability (this would not be expected for a homogeneous material based on the symmetry of loading). Another set of experiments measured load variation across the radius of the sample at a fixed axial and circumferential location. Raw neutron diffraction intensity files and experimental parameter descriptions are included.

  4. Raw neutron scattering data for strain measurement of hydraulically loaded granite and marble samples in triaxial stress state

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Polsky, Yarom

    This entry contains raw data files from experiments performed on the Vulcan beamline at the Spallation Neutron Source at Oak Ridge National Laboratory using a pressure cell. Cylindrical granite and marble samples were subjected to confining pressures of either 0 psi or approximately 2500 psi and internal pressures of either 0 psi, 1500 psi or 2500 psi through a blind axial hole at the center of one end of the sample. The sample diameters were 1.5" and the sample lengths were 6". The blind hole was 0.25" in diameter and 3" deep. One set of experiments measured strains at points located circumferentially around the center of the sample with identical radii to determine if there was strain variability (this would not be expected for a homogeneous material based on the symmetry of loading). Another set of experiments measured load variation across the radius of the sample at a fixed axial and circumferential location. Raw neutron diffraction intensity files and experimental parameter descriptions are included.

  5. Input to Priorities Panel August 7, 2012

    E-Print Network [OSTI]

    Input to Priorities Panel August 7, 2012 Jeff Freidberg MIT 1 #12;The Emperor of Fusion has · Comparison (1 GW overnight cost) · Coal $ 3B · Gas $ 1B · Nuclear $ 4B · Wind $ 2B · Solar-T $ 3B · ITER $25B option · Tough MHD, heating, current drive, transport · I doubt it will achieve its mission · Still

  6. Soft-Input Soft-Output Sphere Decoding Christoph Studer

    E-Print Network [OSTI]

    Soft-Input Soft-Output Sphere Decoding Christoph Studer Integrated Systems Laboratory ETH Zurich Soft-input soft-output (SISO) detection in multiple-input multiple-output (MIMO) systems constitutes Laboratory ETH Zurich, 8092 Zurich, Switzerland Email: boelcskei@nari.ee.ethz.ch Abstract--Soft-input soft

  7. A New Ensemble of Perturbed-Input-Parameter Simulations by the Community Atmosphere Model

    SciTech Connect (OSTI)

    Covey, C; Brandon, S; Bremer, P T; Domyancis, D; Garaizar, X; Johannesson, G; Klein, R; Klein, S A; Lucas, D D; Tannahill, J; Zhang, Y

    2011-10-27T23:59:59.000Z

    Uncertainty quantification (UQ) is a fundamental challenge in the numerical simulation of Earth's weather and climate, and other complex systems. It entails much more than attaching defensible error bars to predictions: in particular it includes assessing low-probability but high-consequence events. To achieve these goals with models containing a large number of uncertain input parameters, structural uncertainties, etc., raw computational power is needed. An automated, self-adapting search of the possible model configurations is also useful. Our UQ initiative at the Lawrence Livermore National Laboratory has produced the most extensive set to date of simulations from the US Community Atmosphere Model. We are examining output from about 3,000 twelve-year climate simulations generated with a specialized UQ software framework, and assessing the model's accuracy as a function of 21 to 28 uncertain input parameter values. Most of the input parameters we vary are related to the boundary layer, clouds, and other sub-grid scale processes. Our simulations prescribe surface boundary conditions (sea surface temperatures and sea ice amounts) to match recent observations. Fully searching this 21+ dimensional space is impossible, but sensitivity and ranking algorithms can identify input parameters having relatively little effect on a variety of output fields, either individually or in nonlinear combination. Bayesian statistical constraints, employing a variety of climate observations as metrics, also seem promising. Observational constraints will be important in the next step of our project, which will compute sea surface temperatures and sea ice interactively, and will study climate change due to increasing atmospheric carbon dioxide.

  8. Materials and Manufacturing

    E-Print Network [OSTI]

    Environmental Assurance Anne Meinhold Unprecedented Accomplishments in the Use of Aluminum-Lithium Alloy Preston is the solution. Other times, the design must accommodate the limitations of materials properties. The design requirements, and written procedures. Nondestructive testing depends on incident or input energy that interacts

  9. Development of MELCOR Input Techniques for High Temperature Gas-Cooled Reactor Analysis

    E-Print Network [OSTI]

    Corson, James

    2011-08-08T23:59:59.000Z

    : : : : : : : : : : : : : : : : : : : : : : : : : : : 201 B.3 PBMR CVH volumes coupled to each COR cell : : : : : : : : : : : : : : 202 B.4 Mass of materials in the fuel component (PBMR) : : : : : : : : : : : : : 204 B.5 Mass of graphite in the clad component (PBMR) : : : : : : : : : : : : : 204 B.6... Mass of graphite in the re ector component (PBMR) : : : : : : : : : : : 205 B.7 PBMR supporting structure parameters : : : : : : : : : : : : : : : : : : 206 B.8 PBMR re ector geometry input : : : : : : : : : : : : : : : : : : : : : : : 207 B.9 PBMR...

  10. Reconsidering Lapita Ancestry: Evidence of Material Change and Migration on Tutuila Island, American Samoa

    E-Print Network [OSTI]

    Welch, Daniel Ryan

    2014-05-06T23:59:59.000Z

    and raw material provisioning accompany the noted cessation of pottery production ca. 1,500-1,700 B.P. Two identifiable forms of technological organization, attributed to the Ceramic Period and Monument Building Period components, are separated in time...

  11. Porous Materials Porous Materials

    E-Print Network [OSTI]

    Berlin,Technische Universität

    1 Porous Materials x Porous Materials · Physical properties * Characteristic impedance p = p 0 e -jk xa- = vej[ ] p x - j ; Zc= p ve = c ka 0k = c 1-j #12;2 Porous Materials · Specific acoustic impedance Porous Materials · Finite thickness ­ blocked p e + -jk (x-d)a p e - jk (x-d)a d x #12

  12. MATERIAL TRACKING USING LANMAS

    SciTech Connect (OSTI)

    Armstrong, F.

    2010-06-07T23:59:59.000Z

    LANMAS is a transaction-based nuclear material accountability software product developed to replace outdated and legacy accountability systems throughout the DOE. The core underlying purpose of LANMAS is to track nuclear materials inventory and report transactions (movement, mixing, splitting, decay, etc.) to the Nuclear Materials Management and Safeguards System (NMMSS). While LANMAS performs those functions well, there are many additional functions provided by the software product. As a material is received onto a site or created at a site, its entire lifecycle can be tracked in LANMAS complete to its termination of safeguards. There are separate functions to track material movements between and within material balance areas (MBAs). The level of detail for movements within a MBA is configurable by each site and can be as high as a site designation or as detailed as building/room/rack/row/position. Functionality exists to track the processing of materials, either as individual items or by modeling a bulk process as an individual item to track inputs and outputs from the process. In cases where sites have specialized needs, the system is designed to be flexible so that site specific functionality can be integrated into the product. This paper will demonstrate how the software can be used to input material into an account and track it to its termination of safeguards.

  13. Ground motion input in seismic evaluation studies

    SciTech Connect (OSTI)

    Sewell, R.T.; Wu, S.C.

    1996-07-01T23:59:59.000Z

    This report documents research pertaining to conservatism and variability in seismic risk estimates. Specifically, it examines whether or not artificial motions produce unrealistic evaluation demands, i.e., demands significantly inconsistent with those expected from real earthquake motions. To study these issues, two types of artificial motions are considered: (a) motions with smooth response spectra, and (b) motions with realistic variations in spectral amplitude across vibration frequency. For both types of artificial motion, time histories are generated to match target spectral shapes. For comparison, empirical motions representative of those that might result from strong earthquakes in the Eastern U.S. are also considered. The study findings suggest that artificial motions resulting from typical simulation approaches (aimed at matching a given target spectrum) are generally adequate and appropriate in representing the peak-response demands that may be induced in linear structures and equipment responding to real earthquake motions. Also, given similar input Fourier energies at high-frequencies, levels of input Fourier energy at low frequencies observed for artificial motions are substantially similar to those levels noted in real earthquake motions. In addition, the study reveals specific problems resulting from the application of Western U.S. type motions for seismic evaluation of Eastern U.S. nuclear power plants.

  14. V-193: Barracuda SSL VPN Input Validation Hole Permits Cross...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2.3.3.216 Addthis Related Articles U-252: Barracuda Web Filter Input Validation Flaws Permit Cross-Site Scripting Attacks U-144:Juniper Secure Access Input Validation Flaw Permits...

  15. On the Wind Power Input to the Ocean General Circulation

    E-Print Network [OSTI]

    Zhai, Xiaoming

    The wind power input to the ocean general circulation is usually calculated from the time-averaged wind products. Here, this wind power input is reexamined using available observations, focusing on the role of the synoptically ...

  16. Automatically identifying critical input regions and code in applications

    E-Print Network [OSTI]

    Carbin, Michael James

    Applications that process complex inputs often react in different ways to changes in different regions of the input. Small changes to forgiving regions induce correspondingly small changes in the behavior and output. Small ...

  17. The Intelligent Combination of Input Shaping and PID Feedback Control

    E-Print Network [OSTI]

    Singhose, William

    The Intelligent Combination of Input Shaping and PID Feedback Control A Dissertation Presented Combination of Input Shaping and PID Feedback Control Approved by: Dr. William Singhose, Advisor School . . . . . . . . . . . . . . . . . . . . 8 1.4 PID Feedback Control . . . . . . . . . . . . . . . . . . . . . . . . . . 14 1.5 Comparison

  18. CORROSIVITY AND COMPOSITION OF RAW AND TREATED PYROLYSIS OILS

    SciTech Connect (OSTI)

    Keiser, Jim; Howell, Michael; Connatser, Raynella M.; Lewis, Sam; Elliott, Douglas C.

    2012-10-14T23:59:59.000Z

    Fast pyrolysis offers a relatively low cost method of processing biomass to produce a liquid product that has the potential for conversion to several types of liquid fuels. The liquid product of fast pyrolysis, known as pyrolysis oil or bio-oil, contains a high oxygen content primarily in the form of water, carboxylic acids, phenols, ketones and aldehydes. These oils are typically very acidic with a Total Acid Number that is often in the range of 50 to 100, and previous studies have shown this material to be quite corrosive to common structural materials. Removal of at least some of the oxygen and conversion of this oil to a more useful product that is considerably less corrosive can be accomplished through a hydrogenation process. The product of such a treatment is considered to have the potential for blending with crude oil for processing in petroleum refineries. Corrosion studies and chemical analyses have been conducted using as produced bio-oil samples as well as samples that have been subjected to different levels of oxygen removal. Chemical analyses show treatment affected the concentrations of carboxylic acids contained in the oil, and corrosion studies showed a positive benefit of the oxygen removal. Results of these studies will be presented in this paper.

  19. Input Routing Determining the next hop with ip_route_input()

    E-Print Network [OSTI]

    Westall, James M.

    _route_input(struct sk_buff *skb, u32 daddr, u32 saddr, u8 tos, struct net_device *dev) 1624 { 1625 struct rtable * rth; 1626 unsigned hash; 1627 int iif = dev->ifindex; 1628 1629 tos &= IPTOS_RT_MASK; The rt_hash_code(daddr, saddr ^ (iif tos); The hash function is implemented by the inline function rt

  20. CERNA WORKING PAPER SERIES Strategic inputs into patent pools

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    1 CERNA WORKING PAPER SERIES Strategic inputs into patent pools Justus Baron Henry Delcamp Working;2 Strategic inputs into patent pools1 Justus BARON2 Henry DELCAMP3 Abstract: This article explores what factors determine the decision of a patent pool to accept new inputs. We propose a dynamic analysis

  1. Nitrate contents of well, raw, treated and pipe borne water in Vom, Plateau State, Nigeria

    SciTech Connect (OSTI)

    Gbodi, T.A.; Atawodi, S.E.

    1987-04-01T23:59:59.000Z

    Nitrate content of water available to man and animals in a rural community in Plateau State, Nigeria was determined. Water samples were obtained from artesian wells, raw untreated surface water, treated raw water, and pipe borne water. The examination of the samples was over a period of 3 mo at weekly intervals. Sixty percent of the artesian wells sampled had nitrate concentration above 5-50 ppm in June and August, while samples from other sources had less than 1 ppm. The proximity of pit latrines to some of the wells may have been responsible for high nitrate content of the well water.

  2. Design Impacts of Stochastically-Varying Input Parameters on Advanced Thermoelectric Conversion Systems

    SciTech Connect (OSTI)

    Hendricks, Terry J.; Karri, Naveen K.

    2007-06-30T23:59:59.000Z

    Advanced, direct thermal energy conversion technologies are receiving increased research attention in order to recover waste thermal energy in advanced vehicles and industrial processes. Advanced thermoelectric (TE) systems necessarily require integrated system-level analyses to establish accurate optimum system designs. Past system-level design and analysis has relied on well-defined deterministic input parameters even though many critically important environmental and system design parameters in the above mentioned applications are often randomly variable, sometimes according to complex relationships, rather than discrete, well-known deterministic variables. This work describes new research and development creating techniques and capabilities for probabilistic design and analysis of advanced TE power generation systems to quantify the effects of randomly uncertain design inputs in determining more robust optimum TE system designs and expected outputs. Selected case studies involving stochastic TE .material properties and coupled multi-variable stochasticity in key environmental and design parameters are presented and discussed to demonstrate key impacts from considering stochastic design inputs on the TE design optimization process. Critical findings show that: 1) stochastic Gaussian input distributions may produce Gaussian or non-Gaussian outcome probability distributions for critical TE design parameters, and 2) probabilistic input considerations can create design effects that warrant significant modifications to deterministically-derived optimum TE system designs. Magnitudes and directions of these design modifications are quantified for selected TE system design analysis cases.

  3. Design Impacts of Stochastically-Varying Input Parameters on Advanced Thermoelectric Conversion

    SciTech Connect (OSTI)

    Hendricks, Terry J.; Karri, Naveen K.

    2007-07-18T23:59:59.000Z

    Advanced, direct thermal energy conversion technologies are receiving increased research attention in order to recover waste thermal energy in advanced vehicles and industrial processes. Advanced thermoelectric (TE) systems necessarily require integrated system-level analyses to establish accurate optimum system designs. Past system-level design and analysis has relied on well-defined deterministic input parameters even though many critically important environmental and system design parameters in the above mentioned applications are often randomly variable, sometimes according to complex relationships, rather than discrete, well-known deterministic variables. This work describes new research and development creating techniques and capabilities for probabilistic design and analysis of advanced TE power generation systems to quantify the effects of randomly uncertain design inputs in determining more robust optimum TE system designs and expected outputs. Selected case studies involving stochastic TE .material properties and coupled multi-variable stochasticity in key environmental and design parameters are presented and discussed to demonstrate key impacts from considering stochastic design inputs on the TE design optimization process. Critical findings show that: 1) stochastic Gaussian input distributions may produce Gaussian or non-Gaussian outcome probability distributions for critical TE design parameters, and 2) probabilistic input considerations can create design effects that warrant significant modifications to deterministically-derived optimum TE system designs. Magnitudes and directions of these design modifications are quantified for selected TE system design analysis cases.

  4. Optical limiting materials

    DOE Patents [OSTI]

    McBranch, Duncan W. (Santa Fe, NM); Mattes, Benjamin R. (Santa Fe, NM); Koskelo, Aaron C. (Los Alamos, NM); Heeger, Alan J. (Santa Barbara, CA); Robinson, Jeanne M. (Los Alamos, NM); Smilowitz, Laura B. (Los Alamos, NM); Klimov, Victor I. (Los Alamos, NM); Cha, Myoungsik (Goleta, CA); Sariciftci, N. Serdar (Santa Barbara, CA); Hummelen, Jan C. (Groningen, NL)

    1998-01-01T23:59:59.000Z

    Optical limiting materials. Methanofullerenes, fulleroids and/or other fullerenes chemically altered for enhanced solubility, in liquid solution, and in solid blends with transparent glass (SiO.sub.2) gels or polymers, or semiconducting (conjugated) polymers, are shown to be useful as optical limiters (optical surge protectors). The nonlinear absorption is tunable such that the energy transmitted through such blends saturates at high input energy per pulse over a wide range of wavelengths from 400-1100 nm by selecting the host material for its absorption wavelength and ability to transfer the absorbed energy into the optical limiting composition dissolved therein. This phenomenon should be generalizable to other compositions than substituted fullerenes.

  5. Study of the digital camera acquisition process and statistical modeling of the sensor raw data

    E-Print Network [OSTI]

    Study of the digital camera acquisition process and statistical modeling of the sensor raw data C. In the present report we present a detailed analysis of the digital image acquisition process which allows us. Aguerrebere, J. Delon, Y. Gousseau, P. Mus´e 1 Introduction The accurate modeling of the acquisition process

  6. Surface and ultrastructural characterization of raw and pretreated switchgrass Bryon S. Donohoe a

    E-Print Network [OSTI]

    California at Riverside, University of

    and economic data on leading pretreatments applied to both corn stover (Eggeman and Elander, 2005; KimSurface and ultrastructural characterization of raw and pretreated switchgrass Bryon S. Donohoe: Pretreatment Enzymatic hydrolysis Biomass Switchgrass Microscopy a b s t r a c t The US Department of Energy

  7. Lattice QCD input for axion cosmology

    E-Print Network [OSTI]

    Evan Berkowitz; Michael I. Buchoff; Enrico Rinaldi

    2015-05-27T23:59:59.000Z

    One intriguing BSM particle is the QCD axion, which could simultaneously provide a solution to the Strong CP problem and account for some, if not all, of the dark matter density in the universe. This particle is a pNGB of the conjectured Peccei-Quinn (PQ) symmetry of the Standard Model. Its mass and interactions are suppressed by a heavy symmetry breaking scale, $f_a$, whose value is roughly greater than $10^{9}$ GeV (or, conversely, the axion mass, $m_a$, is roughly less than $10^4\\ \\mu \\text{eV}$). The density of axions in the universe, which cannot exceed the relic dark matter density and is a quantity of great interest in axion experiments like ADMX, is a result of the early-universe interplay between cosmological evolution and the axion mass as a function of temperature. The latter quantity is proportional to the second derivative of the QCD free energy with respect to the CP-violating phase, $\\theta$. However, this quantity is generically non-perturbative and previous calculations have only employed instanton models at the high temperatures of interest (roughly 1 GeV). In this and future works, we aim to calculate the temperature-dependent axion mass at small $\\theta$ from first-principle lattice calculations, with controlled statistical and systematic errors. Once calculated, this temperature-dependent axion mass is input for the classical evolution equations of the axion density of the universe. Due to a variety of lattice systematic effects at the very high temperatures required, we perform a calculation of the leading small-$\\theta$ cumulant of the theta vacua on large volume lattices for SU(3) Yang-Mills with high statistics as a first proof of concept, before attempting a full QCD calculation in the future. From these pure glue results, the misalignment mechanism yields the axion mass bound $m_a \\geq (14.6\\pm0.1) \\ \\mu \\text{eV}$ when PQ-breaking occurs after inflation.

  8. arterial input functions: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    high-resolution detection of the arterial and venous input function through a PET Wrist Environmental Sciences and Ecology Websites Summary: model. Due to safety and...

  9. arterial input function: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    high-resolution detection of the arterial and venous input function through a PET Wrist Environmental Sciences and Ecology Websites Summary: model. Due to safety and...

  10. Possible Magmatic Input to the Dixie Valley Geothermal Field...

    Open Energy Info (EERE)

    (MT) Resistivity Surveying Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: Possible Magmatic Input to the Dixie Valley Geothermal Field, and...

  11. Impacts of atmospheric nutrient inputs on marine biogeochemistry

    E-Print Network [OSTI]

    Krishnamurthy, Aparna; Moore, J. Keith; Mahowald, Natalie; Luo, Chao; Zender, Charles S

    2010-01-01T23:59:59.000Z

    biomass burning, and biofuels) dominate P inputs [Olmez etburning, fossil fuels, biofuels, volcanoes, sea salts whichburning, fossil fuels, biofuels) G01006 of total P are

  12. ,"New York Natural Gas Input Supplemental Fuels (MMcf)"

    U.S. Energy Information Administration (EIA) Indexed Site

    Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","New York Natural Gas Input Supplemental Fuels (MMcf)",1,"Annual",2013 ,"Release Date:","227...

  13. A Requirement for Significant Reduction in the Maximum BTU Input...

    Energy Savers [EERE]

    A Requirement for Significant Reduction in the Maximum BTU Input Rate of Decorative Vented Gas Fireplaces Would Impose Substantial Burdens on Manufacturers A Requirement for...

  14. Interactive Computing 1 Input/Output and Complex Arithmetic

    E-Print Network [OSTI]

    Verschelde, Jan

    Interactive Computing 1 Input/Output and Complex Arithmetic interactive Python scripts complex Software (MCS 507 L-3) Interactive Computing 30 August 2013 1 / 33 #12;Interactive Computing 1 Input/Output and Complex Arithmetic interactive Python scripts complex arithmetic 2 Python Coding Style and pylint coding

  15. Towards Efficient Private Distributed Computation on Unbounded Input Streams

    E-Print Network [OSTI]

    /11), Cabarnit Cyber Security MAGNET Consortium, MAFAT and Deutsche Telekom Labs at BGU. #12;2 Shlomi Dolev1Towards Efficient Private Distributed Computation on Unbounded Input Streams Shlomi Dolev1 , Juan- curely and distributively perform a computation on common inputs, in such a way that even if the entire

  16. Global sensitivity analysis of computer models with functional inputs

    E-Print Network [OSTI]

    Boyer, Edmond

    -based sensitivity analysis techniques, based on the so-called Sobol's indices, when some input variables computer codes which need a preliminary metamodeling step before performing the sensitivity analysis. We). The "mean model" allows to estimate the sensi- tivity indices of each scalar input variables, while

  17. Considering Workload Input Variations in Error Coverage Estimation

    E-Print Network [OSTI]

    Karlsson, Johan

    different parts of the workload code to be executed different number of times. By using the results from in the workload input when estimating error detection coverage using fault injection are investigated. Results sequence based on results from fault injection experiments with another input sequence is presented

  18. Coordination of Multiple Non-Holonomic Agents with Input Constraints

    E-Print Network [OSTI]

    Loizou, Savvas G.

    -aircraft systems modeled as hybrid systems. With the advent of powerful formal verification tools, there has been with aircraft-like kinematic constraints. A model of a system of input-constrained non- holonomic agents by Belta et al. in [10]. In this paper, a discrete model of a system with input- constrained non

  19. Weather Forecast Data an Important Input into Building Management Systems

    E-Print Network [OSTI]

    Poulin, L.

    2013-01-01T23:59:59.000Z

    it can generate as much or more energy that it needs ? Building activities need N kWhrs per day (solar panels, heating, etc) ? Harvested from solar panels & passive solar. Amount depends on weather ? NWP models forecast DSWRF @ surface (MJ/m2...://collaboration.cmc.ec.gc.ca/cmc/cmoi/SolarScribe/SolarScribe/ CMC NWP datasets for Day 2 Forecasts ? Regional Deterministic Prediction System (RDPS) ? RDPS raw model data ? 10 km resolution, North America, 000-054 forecasts ? Data at: http...

  20. An ISO 8178 correlation study between raw and dilute exhaust emission sampling systems

    SciTech Connect (OSTI)

    Stotler, R.; Human, D.

    1995-12-31T23:59:59.000Z

    Beginning in 1996 the exhaust emissions of off-highway heavy-duty diesel engines between 175--750 hp will be regulated by the EPA. Along with the emission regulations comes the difficulty of establishing a set of standard test procedures which allow engine manufacturers and regulatory agencies to compare emissions data based on similar test methods. In order to remedy this problem, the International Organization for Standardization (ISO) has come up with an exhaust measurement procedure, ISO 8178, that can be applied worldwide to off-highway heavy-duty diesel engines. The ISO 8178 test procedure allows the exhaust emissions to be sampled with either a full flow dilute or raw sampling system. However, the preferred sampling systems are the raw gaseous and mini dilution tunnel (MDT) particulate measurement methods. The main concern of these sampling systems is the demonstration of equivalency to the full flow dilution system that is currently used for the certification of on-highway heavy-duty diesel engines. Using an in-house full flow dilution system and a recently built raw gaseous emissions bench along with a pre-existing MDT, this research was conducted to find the correlation between the two sampling systems. For the gaseous emissions of HC, NO{sub x}, and CO the correlation between the raw and full dilution sampling systems was within 7.0%, 3.0%, and 1.0% respectively. The correlation between the MDT and full dilution particulate sampling systems was within 2.5%. Additional investigation was performed in the area of MDT transfer tube length and its effect on particulate measurement. An experiment was performed to quantify the effect of a wide range of water vapor concentrations on the measurement of NO{sub x}.

  1. T-623: HP Business Availability Center Input Validation Hole Permits Cross-Site Scripting Attacks

    Broader source: Energy.gov [DOE]

    The software does not properly filter HTML code from user-supplied input before displaying the input.

  2. Wavelength meter having single mode fiber optics multiplexed inputs

    DOE Patents [OSTI]

    Hackel, Richard P. (Livermore, CA); Paris, Robert D. (San Ramon, CA); Feldman, Mark (Pleasanton, CA)

    1993-01-01T23:59:59.000Z

    A wavelength meter having a single mode fiber optics input is disclosed. The single mode fiber enables a plurality of laser beams to be multiplexed to form a multiplexed input to the wavelength meter. The wavelength meter can provide a determination of the wavelength of any one or all of the plurality of laser beams by suitable processing. Another aspect of the present invention is that one of the laser beams could be a known reference laser having a predetermined wavelength. Hence, the improved wavelength meter can provide an on-line calibration capability with the reference laser input as one of the plurality of laser beams.

  3. Wavelength meter having single mode fiber optics multiplexed inputs

    DOE Patents [OSTI]

    Hackel, R.P.; Paris, R.D.; Feldman, M.

    1993-02-23T23:59:59.000Z

    A wavelength meter having a single mode fiber optics input is disclosed. The single mode fiber enables a plurality of laser beams to be multiplexed to form a multiplexed input to the wavelength meter. The wavelength meter can provide a determination of the wavelength of any one or all of the plurality of laser beams by suitable processing. Another aspect of the present invention is that one of the laser beams could be a known reference laser having a predetermined wavelength. Hence, the improved wavelength meter can provide an on-line calibration capability with the reference laser input as one of the plurality of laser beams.

  4. Colomban_EMRSOARTF.doc Applied Physics A: Materials Science & Processing 79 (2004) 167-170

    E-Print Network [OSTI]

    /macro-spectroscopy allows for a non-destructive remote analysis: body and glaze, crystalline and amorphous phases can phases on cooling, raw materials are almost fully molten to produce a glass or a glaze, but small crystals (cooling in many glasses. Different materials

  5. 1970. Analysis of arsenic and selenium in marine raw materials. J. Sci. Food Agric. 21:242-247.

    E-Print Network [OSTI]

    were collected in the intake canal ofthe Carolina Power and Light Company generating plant in the Cape .Fear Rivel' estuary west of buoy 19 on 11 October 1977. Bottom type was silty-sand at depth of 4 m

  6. Feasability Study and Protocol Development for Manufacturing of a Veterinarian Drug Using Local Plant Sources as Raw Materials

    SciTech Connect (OSTI)

    Davison, B. H.; Kuritz, T.

    2006-08-28T23:59:59.000Z

    This CRADA was a collaborative effort between the Oak Ridge National Laboratory (ORNL) and Sass & Sass, Inc. It also had involvement with the University of Tennessee Knoxville (UTK) The CRADA focused on the development and commercialization in the U.S. of the substance developed in Russia with potential veterinary applications. The project addressed validation and further characterization of the lead substance necessary for its commercialization in the U.S. market as a veterinarian biologic and at the commercialization of the product for the Russian market, by the Russian group establishing of sustainability of the Russian research groups.

  7. Production of a basic raw material with acceptable texture and taste from minced Atlantic croaker (Micropogon undulatus)

    E-Print Network [OSTI]

    Yeh, Chia-Ping Salome

    1974-01-01T23:59:59.000Z

    protein from the muscle tissue. Of vital importance. to the successful manufac- ture of sausage is the abiLity of sodium chloride to solubilize. muscle proteins (Kramlich, 1970). These solubilized proteins (salt- soluble myofibrillar proteins...

  8. ONTHEGO TEXT ENTRY: EVALUATING AND IMPROVING MOBILE TEXT INPUT ON

    E-Print Network [OSTI]

    Starner, Thad E.

    ONTHEGO TEXT ENTRY: EVALUATING AND IMPROVING MOBILE TEXT INPUT ON MINIQWERTY KEYBOARDS A Thesis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv I INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 Thesis Statement-QWERTY KEYBOARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 4.1 Blind Typing in Real

  9. Face Interface : a methodology for experimental learning of input modalities

    E-Print Network [OSTI]

    Wetzel, Jon William

    2007-01-01T23:59:59.000Z

    This thesis demonstrates that creating a system with a visual representation of the face which mirrors the user's facial gestures appears to solve problems in teaching a user to use the new input affordances of face-based ...

  10. Adaptive Distributed Parameter and Input Estimation in Plasma Tokamak Heat

    E-Print Network [OSTI]

    Boyer, Edmond

    . Keywords: Thermonuclear fusion, distributed parameter systems, input state and parameter estimation, adaptive infinite-dimensional estimation, Galerkin method 1. INTRODUCTION In a controlled thermonuclear fusion reactor, the plasma thermal diffusivity and heating energy play an important role

  11. Operation of buck regulator with ultra-low input voltage

    E-Print Network [OSTI]

    Harris, Cory Angelo

    2014-01-01T23:59:59.000Z

    Based on the LTC3621 and LTC3624, the designed buck regulator proposed in this thesis aims to lower the allowed input voltage and increase efficiency compared to the original part without making significant changes to ...

  12. Graphene induced bifurcation of energy levels at low input power

    E-Print Network [OSTI]

    Li, Rujiang; Lin, Shisheng; Liu, Xu; Chen, Hongsheng

    2015-01-01T23:59:59.000Z

    We study analytically the energy states in the waveguide system of graphene coated dielectric nanowire based on the explicit form of nonlinear surface conductivity of graphene. The energy levels of different plasmonic modes can be tuned by the input power at the order of a few tenths of mW. The self-focusing behavior and self-defocusing behavior are exhibited in the lower and upper bifurcation branches, respectively, which are separated by a saturation of input power. Moreover, due to the nonlinearity of graphene, the dispersion relations for different input powers evolve to an energy band which is in sharp contrast with the discrete energy level in the limit of zero power input.

  13. Comparison of wind stress algorithms, datasets and oceanic power input

    E-Print Network [OSTI]

    Yuan, Shaoyu

    2009-01-01T23:59:59.000Z

    If the ocean is in a statistically steady state, energy balance is a strong constraint, suggesting that the energy input into the world ocean is dissipated simultaneously at the same rate. Energy conservation is one of the ...

  14. ac input power: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    architecture was ... Salazar, Nathaniel Jay Tobias 2012-01-01 8 On the power of real Turing machines over binary inputs Mathematics Websites Summary: On the power of real Turing...

  15. additional power input: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    pairs of channels. Motohisa Fukuda; Ion Nechita 2012-12-07 4 On the power of real Turing machines over binary inputs Mathematics Websites Summary: On the power of real Turing...

  16. U-139: IBM Tivoli Directory Server Input Validation Flaw | Department...

    Broader source: Energy.gov (indexed) [DOE]

    can conduct cross-site scripting attacks PLATFORM: Version(s): 6.2, 6.3 ABSTRACT: The Web Admin Tool does not properly filter HTML code from user-supplied input before...

  17. anthropogenic lead inputs: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    et al. Pb Brest, Universit de 6 GEOS-CHEM ANTHROPOGENIC EMISSIONS Table 1. Inventories general features. Use of optional inventories is set in the input.geos file....

  18. Process and Intermediate Calculations User AccessInputs Outputs

    E-Print Network [OSTI]

    Process and Intermediate Calculations User AccessInputs Outputs Fire Behavior & Probability STARFire System Flow Valuation Processing Temporal Schedules Smoke Zones Zone impact Emissions Fire and compare Valuation (Structured Elicit Process) 1) Value Layers: Point (housing, cultural trees, etc

  19. Analyzing the impacts of sales tax on agricultural inputs

    E-Print Network [OSTI]

    Lamar, Christina Helweg

    1992-01-01T23:59:59.000Z

    ANALYZING THE IMPACTS OF SALES TAX ON AGRICULTURAL INPUTS CHRISTINA HELWEG ~ Submitted to the Office of Graduate Studies of Texas AgtM University in partial fulSllment of the requirements for the degree of MASTER OF SCIENCE August 1992 Major... Subject: Agncultural Economics ABSTRACT Analyzing the Impacts of Sales Tax on Agricultural Inputs. (August 1992) Christina Helweg Lamar, B. S. , Texas AthM University Chair of Advisory Committee: Dr. Ronald Knutson With the increased demand...

  20. Charged-Particle Thermonuclear Reaction Rates: III. Nuclear Physics Input

    E-Print Network [OSTI]

    Christian Iliadis; Richard Longland; Art Champagne; Alain Coc

    2010-04-23T23:59:59.000Z

    The nuclear physics input used to compute the Monte Carlo reaction rates and probability density functions that are tabulated in the second paper of this series (Paper II) is presented. Specifically, we publish the input files to the Monte Carlo reaction rate code RatesMC, which is based on the formalism presented in the first paper of this series (Paper I). This data base contains overwhelmingly experimental nuclear physics information. The survey of literature for this review was concluded in November 2009.

  1. Optical limiting materials

    DOE Patents [OSTI]

    McBranch, D.W.; Mattes, B.R.; Koskelo, A.C.; Heeger, A.J.; Robinson, J.M.; Smilowitz, L.B.; Klimov, V.I.; Cha, M.; Sariciftci, N.S.; Hummelen, J.C.

    1998-04-21T23:59:59.000Z

    Methanofullerenes, fulleroids and/or other fullerenes chemically altered for enhanced solubility, in liquid solution, and in solid blends with transparent glass (SiO{sub 2}) gels or polymers, or semiconducting (conjugated) polymers, are shown to be useful as optical limiters (optical surge protectors). The nonlinear absorption is tunable such that the energy transmitted through such blends saturates at high input energy per pulse over a wide range of wavelengths from 400--1,100 nm by selecting the host material for its absorption wavelength and ability to transfer the absorbed energy into the optical limiting composition dissolved therein. This phenomenon should be generalizable to other compositions than substituted fullerenes. 5 figs.

  2. Covetic Materials

    Energy Savers [EERE]

    Can re-melt, dilute, alloy... Fabrication of Covetic Materials - Nanocarbon Infusion 3 4 Technical Approach Unusual Characteristics of Covetic Materials ("covalent" &...

  3. Abstract: Original Article A COMPARATIVE IN-VITRO STUDY TO EVALUATE THE ANTIBACTERIAL AND ANTIFUNGAL ACTIVITY OF RAW AND PROCESSED GANDHAKA

    E-Print Network [OSTI]

    Pramod Yadav; Pradeep Kumar Prajapati

    Introduction: Gandhaka is extensively used by Ayurvedic practitioners for treating a wide range of skin disorders. Internally as well as externally, it has shown good prospective in controlling various Kshudra Kustha. Aims and objectives: Present study was carried out to assess in vitro antimicrobial potential of raw Gandhaka and Shodhita Gandhaka by two different methods (Godugdha and Bhringaraja). Material and Methods: Two Grampositive, two Gram-negative and single strain of fungus were used for the present study. Gentamicin and clotrimazole were taken as standard control. The test was performed by making wells of specific diameter (generally 6 mm) on to the surface of the pre sterilized agar plates over which culture of the

  4. Measurement of methyl-tert-butyl-ether (MTBE) in raw drinking water

    SciTech Connect (OSTI)

    Davisson, M L; Koester, C J; Moran, J E

    1999-10-14T23:59:59.000Z

    In order to assess the pathways for human exposure to methyl-tert-butyl-ether (MTBE) and to understand the extent of MTBE contamination in watersheds, a purge and trap gas chromatographic mass spectrometric method to measure part-per-trillion (ppt) concentrations of MTBE in environmental waters was developed. A variety of California's raw drinking waters were analyzed. No detectable MTBE was found in deep groundwater (>1000 feet). However shallow groundwater ({approx}250 feet) contained MTBE concentrations of non-detect to 1300 ppt. MTBE concentrations measured in rivers and lakes ranged from non-detect to 3500 ppt. East (San Francisco) Bay area rain water contained approximately 80 ppt MTBE.

  5. Materials Scientist

    Broader source: Energy.gov [DOE]

    Alternate Title(s):Materials Research Engineer; Metallurgical/Chemical Engineer; Product Development Manager;

  6. Sensitivity of piping seismic responses to input factors

    SciTech Connect (OSTI)

    O'Connell, W.J.

    1985-05-01T23:59:59.000Z

    This report summarizes the sensitivity of peak dynamic seismic responses to input parameters. The responses have been modeled and calculated for the Zion Unit 1 plant as part of a seismic probabilistic risk assessment (PRA) performed by the US NRC Seismic Safety Margins Research Program (SSMRP). The SSMRP was supported by the US NRC Office of Nuclear Regulatory Research. Two sensitivity topics motivated the study. The first is the sensitivity of piping response to the mean value of piping damping. The second is the sensitivity of all the responses to the earthquake and model input parameters including soil, structure and piping parameters; this information is required for another study, the sensitivity of the plant system response (in terms of risk) to these dynamic input parameters and to other input factors. We evaluate the response sensitivities by performing a linear regression analysis (LRA) of the computer code SMACS. With SMACS we have a detailed model of the Zion plant and of the important dynamic processes in the soil, structures and piping systems. The qualitative results change with the location of the individual response. Different responses are in locations where the many potential influences have different effectiveness. The results give an overview of the complexity of the seismic dyanmic response of a plant. Within the diversity trends are evident in the influences of the input variables on the responses.

  7. Nonlinear quantum input-output analysis using Volterra series

    E-Print Network [OSTI]

    Jing Zhang; Yu-xi Liu; Re-Bing Wu; Kurt Jacobs; Sahin Kaya Ozdemir; Lan Yang; Tzyh-Jong Tarn; Franco Nori

    2014-08-04T23:59:59.000Z

    Quantum input-output theory plays a very important role for analyzing the dynamics of quantum systems, especially large-scale quantum networks. As an extension of the input-output formalism of Gardiner and Collet, we develop a new approach based on the quantum version of the Volterra series which can be used to analyze nonlinear quantum input-output dynamics. By this approach, we can ignore the internal dynamics of the quantum input-output system and represent the system dynamics by a series of kernel functions. This approach has the great advantage of modelling weak-nonlinear quantum networks. In our approach, the number of parameters, represented by the kernel functions, used to describe the input-output response of a weak-nonlinear quantum network, increases linearly with the scale of the quantum network, not exponentially as usual. Additionally, our approach can be used to formulate the quantum network with both nonlinear and nonconservative components, e.g., quantum amplifiers, which cannot be modelled by the existing methods, such as the Hudson-Parthasarathy model and the quantum transfer function model. We apply our general method to several examples, including Kerr cavities, optomechanical transducers, and a particular coherent feedback system with a nonlinear component and a quantum amplifier in the feedback loop. This approach provides a powerful way to the modelling and control of nonlinear quantum networks.

  8. Optical device with conical input and output prism faces

    DOE Patents [OSTI]

    Brunsden, Barry S. (Chicago, IL)

    1981-01-01T23:59:59.000Z

    A device for radially translating radiation in which a right circular cylinder is provided at each end thereof with conical prism faces. The faces are oppositely extending and the device may be severed in the middle and separated to allow access to the central part of the beam. Radiation entering the input end of the device is radially translated such that radiation entering the input end at the perimeter is concentrated toward the output central axis and radiation at the input central axis is dispersed toward the output perimeter. Devices are disclosed for compressing beam energy to enhance drilling techniques, for beam manipulation of optical spatial frequencies in the Fourier plane and for simplification of dark field and color contrast microscopy. Both refracting and reflecting devices are disclosed.

  9. Incorporating uncertainty in RADTRAN 6.0 input files.

    SciTech Connect (OSTI)

    Dennis, Matthew L.; Weiner, Ruth F.; Heames, Terence John (Alion Science and Technology)

    2010-02-01T23:59:59.000Z

    Uncertainty may be introduced into RADTRAN analyses by distributing input parameters. The MELCOR Uncertainty Engine (Gauntt and Erickson, 2004) has been adapted for use in RADTRAN to determine the parameter shape and minimum and maximum of the distribution, to sample on the distribution, and to create an appropriate RADTRAN batch file. Coupling input parameters is not possible in this initial application. It is recommended that the analyst be very familiar with RADTRAN and able to edit or create a RADTRAN input file using a text editor before implementing the RADTRAN Uncertainty Analysis Module. Installation of the MELCOR Uncertainty Engine is required for incorporation of uncertainty into RADTRAN. Gauntt and Erickson (2004) provides installation instructions as well as a description and user guide for the uncertainty engine.

  10. Self-consistent input-output formulation of quantum feedback

    SciTech Connect (OSTI)

    Yanagisawa, M. [Department of Engineering, The Australian National University, Canberra, ACT 0200 (Australia); Hope, J. J. [Department of Quantum Science, The Australian National University, Canberra, ACT 0200 (Australia)

    2010-12-15T23:59:59.000Z

    A simple method of analyzing quantum feedback circuits is presented. The classical analysis of feedback circuits can be generalized to apply to quantum systems by mapping the field operators of various outputs to other inputs via the standard input-output formalism. Unfortunately, this has led to unphysical results such as the violation of the Heisenberg uncertainty principle for in-loop fields. This paper shows that this general approach can be redeemed by ensuring a self-consistently Hermitian Hamiltonian. The calculations are based on a noncommutative calculus of operator derivatives. A full description of several examples of quantum linear and nonlinear feedback for optical systems is presented.

  11. ETFOD: a point model physics code with arbitrary input

    SciTech Connect (OSTI)

    Rothe, K.E.; Attenberger, S.E.

    1980-06-01T23:59:59.000Z

    ETFOD is a zero-dimensional code which solves a set of physics equations by minimization. The technique used is different than normally used, in that the input is arbitrary. The user is supplied with a set of variables from which he specifies which variables are input (unchanging). The remaining variables become the output. Presently the code is being used for ETF reactor design studies. The code was written in a manner to allow easy modificaton of equations, variables, and physics calculations. The solution technique is presented along with hints for using the code.

  12. Total Refinery Net Input of Crude Oil and Petroleum Products

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are nowTotal" (Percent) Type: Sulfur Content API GravityDakota" "Fuel, quality", 2013,Iowa"Dakota"YearProductionShaleInput Product:Input Product: Total

  13. Numerical solution of transient eddy current problems with input current intensities as boundary data

    E-Print Network [OSTI]

    Rodríguez, Rodolfo

    Numerical solution of transient eddy current problems with input current intensities as boundary to solve transient eddy current problems with input current intensities as data, formulated in terms: Eddy current problems, time-dependent electromagnetic problems, input current intensities, finite

  14. PREDICTING THE TIME RESPONSE OF A BUILDING UNDER HEAT INPUT CONDITIONS FOR ACTIVE SOLAR HEATING SYSTEMS

    E-Print Network [OSTI]

    Warren, Mashuri L.

    2013-01-01T23:59:59.000Z

    OF A BUILDING UNDER HEAT INPUT CONDITIONS FOR ACTIVE SOLAROF A BUILDING UNDER HEAT INPUT CONDITIONS FOR ACTIVE SOLARbuilding to changes in heat input, and to predict room and

  15. Analyses of Oxyanion Materials by Prompt Gamma Activation Analysis

    SciTech Connect (OSTI)

    Firestone, Richard B; Perry, D.L.; English, G.A.; Firestone, R.B.; Leung, K.-N.; Garabedian, G.; Molnar, G.L.; Revay, Zs.

    2008-03-24T23:59:59.000Z

    Prompt gamma activation analysis (PGAA) has been used to analyze metal ion oxyanion materials that have multiple applications, including medicine, materials, catalysts, and electronics. The significance for the need for accurate, highly sensitive analyses for the materials is discussed in the context of quality control of end products containing the parent element in each material. Applications of the analytical data for input to models and theoretical calculations related to the electronic and other properties of the materials are discussed.

  16. PneUI: Pneumatically Actuated Soft Composite Materials for Shape Changing Interfaces

    E-Print Network [OSTI]

    Yao, Lining

    This paper presents PneUI, an enabling technology to build shape-changing interfaces through pneumatically-actuated soft composite materials. The composite materials integrate the capabilities of both input sensing and ...

  17. A tool to estimate materials and manufacturing energy for a product

    E-Print Network [OSTI]

    Duque Ciceri, Natalia

    This study proposes an easy-to-use methodology to estimate the materials embodied energy and manufacturing energy for a product. The tool requires as input the product's Bill of Materials and the knowledge on how these ...

  18. Optimal linear control systems with input derivative constraints

    E-Print Network [OSTI]

    Moore, John Barratt

    . Optimal linear control systems with input derivative constraints J. B. Moore, Ph. D., and Prof. B-loss-function minimisation problem is linear. The "paper applies the results of this optimal control theory to a class of performance desired. For linear, finite-dimensional, completely controllable systems, Kalmanl has shown

  19. Gaussian Process Training with Input Noise Andrew McHutchon

    E-Print Network [OSTI]

    Edinburgh, University of

    University Cambridge, CB2 1PZ ajm257@cam.ac.uk Carl Edward Rasmussen Department of Engineering Cambridge University Cambridge, CB2 1PZ cer54@cam.ac.uk Abstract In standard Gaussian Process regression input intuitive sense: for example, an application in Rasmussen and Williams (2006) [1] is that of modelling CO2

  20. Power Control for Discrete-Input Block-Fading Channels

    E-Print Network [OSTI]

    Guillén i Fàbregas, Albert

    . K. Rasmussen CUED / F-INFENG / TR 582 August 2007 #12;#12;1 Power Control for Discrete-Input Block-Fading Channels Khoa D. Nguyen, Albert Guill´en i F`abregas and Lars K. Rasmussen Abstract We consider power systems employing orthogonal frequency division multiplexing. K. D. Nguyen and L. K. Rasmussen

  1. Input Design for Nonlinear Stochastic Dynamic Systems -A Particle Filter

    E-Print Network [OSTI]

    Schn, Thomas

    Input Design for Nonlinear Stochastic Dynamic Systems - A Particle Filter Approach R. Bhushan in nonlinear stochastic dynamic systems. The approach relies on minimizing a function of the covariance]). There has also been work done on obtaining finite sam- ple covariance estimates (Weyer et al. [1999], Weyer

  2. CO2 enrichment increases carbon and nitrogen input from

    E-Print Network [OSTI]

    CO2 enrichment increases carbon and nitrogen input from fine roots in a deciduous forest Colleen2 Ecological Society of America, 2008 #12;#12;#12;#12;#12;+ [CO2] #12;+ Net primary production + [CO2] #12;+ Net primary production + [CO2] + C and N storage in biomass #12;+ Net primary production

  3. CHARACTERIZATION OF VIBRATIONINDUCED IMAGE DEFECTS IN INPUT SCANNERS

    E-Print Network [OSTI]

    Wolberg, George

    ) by dynamic errors of gears, timing bets, and motors, and indirectly by structural vibrations induced by gearsCHARACTERIZATION OF VIBRATION­INDUCED IMAGE DEFECTS IN INPUT SCANNERS Robert P. Loce George Wolberg. Keywords: image defects, digital documents, scanned documents, vibrations, motion quality 1. INTRODUCTION

  4. Power Control for Crossbar-based Input-Queued Switches

    E-Print Network [OSTI]

    , if f is the maximum digital signal frequency, the power consumption of a CMOS device is proportional number of data simultaneously flowing across the switching fabric. Thermal power dissipation is becoming1 Power Control for Crossbar-based Input-Queued Switches Andrea Bianco, Paolo Giaccone, Guido

  5. FULL FUEL CYCLE ASSESSMENT WELL TO WHEELS ENERGY INPUTS,

    E-Print Network [OSTI]

    FULL FUEL CYCLE ASSESSMENT WELL TO WHEELS ENERGY INPUTS, EMISSIONS, AND WATER IMPACTS Preparation for the AB 1007 (Pavley) Alternative Transportation Fuels Plan Proceeding Prepared For: California Energy, Project Manager Ray Tuvell, Manager EMERGING FUELS & TECHNOLOGY OFFICE Rosella Shapiro, Deputy Director

  6. FULL FUEL CYCLE ASSESSMENT WELL TO TANK ENERGY INPUTS,

    E-Print Network [OSTI]

    FULL FUEL CYCLE ASSESSMENT WELL TO TANK ENERGY INPUTS, EMISSIONS, AND WATER IMPACTS Prepared For Manager McKinley Addy, Project Manager Ray Tuvell, Manager EMERGING FUELS & TECHNOLOGY OFFICE Rosella Shapiro, Deputy Director FUELS AND TRANSPORTATION DIVISION B.B Blevins Executive Director DISCLAIMER

  7. U-050: Adobe Flex SDK Input Validation Flaw Permits Cross-Site Scripting Attacks

    Broader source: Energy.gov [DOE]

    Flex applications created using the Flex SDK may not properly filter HTML code from user-supplied input before displaying the input.

  8. DOE Seeks Public Input on an Integrated, Interagency Pre-Application...

    Energy Savers [EERE]

    Seeks Public Input on an Integrated, Interagency Pre-Application Process for Transmission Authorizations DOE Seeks Public Input on an Integrated, Interagency Pre-Application...

  9. Using Whole-House Field Tests to Empirically Derive Moisture Buffering Model Inputs

    SciTech Connect (OSTI)

    Woods, J.; Winkler, J.; Christensen, D.; Hancock, E.

    2014-08-01T23:59:59.000Z

    Building energy simulations can be used to predict a building's interior conditions, along with the energy use associated with keeping these conditions comfortable. These models simulate the loads on the building (e.g., internal gains, envelope heat transfer), determine the operation of the space conditioning equipment, and then calculate the building's temperature and humidity throughout the year. The indoor temperature and humidity are affected not only by the loads and the space conditioning equipment, but also by the capacitance of the building materials, which buffer changes in temperature and humidity. This research developed an empirical method to extract whole-house model inputs for use with a more accurate moisture capacitance model (the effective moisture penetration depth model). The experimental approach was to subject the materials in the house to a square-wave relative humidity profile, measure all of the moisture transfer terms (e.g., infiltration, air conditioner condensate) and calculate the only unmeasured term: the moisture absorption into the materials. After validating the method with laboratory measurements, we performed the tests in a field house. A least-squares fit of an analytical solution to the measured moisture absorption curves was used to determine the three independent model parameters representing the moisture buffering potential of this house and its furnishings. Follow on tests with realistic latent and sensible loads showed good agreement with the derived parameters, especially compared to the commonly-used effective capacitance approach. These results show that the EMPD model, once the inputs are known, is an accurate moisture buffering model.

  10. Clauser-Horne Bell test with imperfect random inputs

    E-Print Network [OSTI]

    Xiao Yuan; Qi Zhao; Xiongfeng Ma

    2015-05-16T23:59:59.000Z

    Bell test is one of the most important tools in quantum information science. On the one hand, it enables fundamental test for the physics laws of nature, and on the other hand, it can be also applied in varieties of device independent tasks such as quantum key distribution and random number generation. In practice, loopholes existing in experimental demonstrations of Bell tests may affect the validity of the conclusions. In this work, we focus on the randomness (freewill) loophole and investigate the randomness requirement in a well-known Bell test, the Clauser-Horne test, under various conditions. With partially random inputs, we explicitly bound the Bell value for all local hidden variable models by optimizing the classical strategy. Our result thus puts input randomness requirement on the Clauser-Horne test under varieties of practical scenarios. The employed analysis technique can be generalized to other Bell's inequalities.

  11. Microchannel cross load array with dense parallel input

    DOE Patents [OSTI]

    Swierkowski, Stefan P.

    2004-04-06T23:59:59.000Z

    An architecture or layout for microchannel arrays using T or Cross (+) loading for electrophoresis or other injection and separation chemistry that are performed in microfluidic configurations. This architecture enables a very dense layout of arrays of functionally identical shaped channels and it also solves the problem of simultaneously enabling efficient parallel shapes and biasing of the input wells, waste wells, and bias wells at the input end of the separation columns. One T load architecture uses circular holes with common rows, but not columns, which allows the flow paths for each channel to be identical in shape, using multiple mirror image pieces. Another T load architecture enables the access hole array to be formed on a biaxial, collinear grid suitable for EDM micromachining (square holes), with common rows and columns.

  12. Scintillator material

    DOE Patents [OSTI]

    Anderson, David F. (Batavia, IL); Kross, Brian J. (Aurora, IL)

    1994-01-01T23:59:59.000Z

    An improved scintillator material comprising cerium fluoride is disclosed. Cerium fluoride has been found to provide a balance of good stopping power, high light yield and short decay constant that is superior to known scintillator materials such as thallium-doped sodium iodide, barium fluoride and bismuth germanate. As a result, cerium fluoride is favorably suited for use as a scintillator material in positron emission tomography.

  13. Scintillator material

    DOE Patents [OSTI]

    Anderson, David F. (Batavia, IL); Kross, Brian J. (Aurora, IL)

    1992-01-01T23:59:59.000Z

    An improved scintillator material comprising cerium fluoride is disclosed. Cerium fluoride has been found to provide a balance of good stopping power, high light yield and short decay constant that is superior to known scintillator materials such as thallium-doped sodium iodide, barium fluoride and bismuth germanate. As a result, cerium fluoride is favorably suited for use as a scintillator material in positron emission tomography.

  14. Scintillator material

    DOE Patents [OSTI]

    Anderson, D.F.; Kross, B.J.

    1992-07-28T23:59:59.000Z

    An improved scintillator material comprising cerium fluoride is disclosed. Cerium fluoride has been found to provide a balance of good stopping power, high light yield and short decay constant that is superior to known scintillator materials such as thallium-doped sodium iodide, barium fluoride and bismuth germanate. As a result, cerium fluoride is favorably suited for use as a scintillator material in positron emission tomography. 4 figs.

  15. Scintillator material

    DOE Patents [OSTI]

    Anderson, D.F.; Kross, B.J.

    1994-06-07T23:59:59.000Z

    An improved scintillator material comprising cerium fluoride is disclosed. Cerium fluoride has been found to provide a balance of good stopping power, high light yield and short decay constant that is superior to known scintillator materials such as thallium-doped sodium iodide, barium fluoride and bismuth germanate. As a result, cerium fluoride is favorably suited for use as a scintillator material in positron emission tomography. 4 figs.

  16. Regression Given input data (features), predict value of a

    E-Print Network [OSTI]

    Giger, Christine

    ^ = (XX> ) 1 Xy etc. #12;! Many relations are not linear The complete graph Non-linear regression #12;! Need to fit non-linear functions example: polynomials Non-linear regression y = 6 10000 x5 82 10000 x) the dimension of the inputs After applying z(x), we fit a plane in 3D-space Non-linear regression y = 0 + 1x

  17. Regression Given input data (features), predict value of a

    E-Print Network [OSTI]

    Giger, Christine

    The complete graph Non-linear regression #12; Need to fit non-linear functions example: polynomials Non-linear of the inputs After applying z(x), we fit a plane in 3D-space Non-linear regression y = 0 + 1x + 2x2 z(x) = 1 x x2 #12;x y x2 regression from x to y, non-linear lifting from x to z=[x x2] regression from [x x2

  18. Thorough analysis of input physics in CESAM and CLES codes

    E-Print Network [OSTI]

    Josefina Montalban; Yveline Lebreton; Andrea Miglio; Richard Scuflaire; Pierre Morel; Arlette Noels

    2008-04-14T23:59:59.000Z

    This contribution is not about the quality of the agreement between stellar models computed by CESAM and CLES codes, but more interesting, on what ESTA-Task~1 run has taught us about these codes and about the input physics they use. We also quantify the effects of different implementations of the same physics on the seismic properties of the stellar models, that in fact is the main aim of ESTA experiments.

  19. Environmental Transport Input Parameters for the Biosphere Model

    SciTech Connect (OSTI)

    M. Wasiolek

    2004-09-10T23:59:59.000Z

    This analysis report is one of the technical reports documenting the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the total system performance assessment for the license application (TSPA-LA) for the geologic repository at Yucca Mountain. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows relationships among the reports developed for biosphere modeling and biosphere abstraction products for the TSPA-LA, as identified in the ''Technical Work Plan for Biosphere Modeling and Expert Support'' (BSC 2004 [DIRS 169573]) (TWP). This figure provides an understanding of how this report contributes to biosphere modeling in support of the license application (LA). This report is one of the five reports that develop input parameter values for the biosphere model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes the conceptual model and the mathematical model. The input parameter reports, shown to the right of the Biosphere Model Report in Figure 1-1, contain detailed description of the model input parameters. The output of this report is used as direct input in the ''Nominal Performance Biosphere Dose Conversion Factor Analysis'' and in the ''Disruptive Event Biosphere Dose Conversion Factor Analysis'' that calculate the values of biosphere dose conversion factors (BDCFs) for the groundwater and volcanic ash exposure scenarios, respectively. The purpose of this analysis was to develop biosphere model parameter values related to radionuclide transport and accumulation in the environment. These parameters support calculations of radionuclide concentrations in the environmental media (e.g., soil, crops, animal products, and air) resulting from a given radionuclide concentration at the source of contamination (i.e., either in groundwater or in volcanic ash). The analysis was performed in accordance with the TWP (BSC 2004 [DIRS 169573]).

  20. Bubbles as tracers of heat input to cooling flows

    E-Print Network [OSTI]

    J. Binney; F. Alouani Bibi; H. Omma

    2007-01-31T23:59:59.000Z

    We examine the distribution of injected energy in three-dimensional, adaptive-grid simulations of the heating of cooling flows. We show that less than 10 percent of the injected energy goes into bubbles. Consequently, the energy input from the nucleus is underestimated by a factor of order 6 when it is taken to be given by PVgamma/(gamma-1), where P and V are the pressure and volume of the bubble, and gamma the ratio of principal specific heats.

  1. Method of validating measurement data of a process parameter from a plurality of individual sensor inputs

    DOE Patents [OSTI]

    Scarola, Kenneth (Windsor, CT); Jamison, David S. (Windsor, CT); Manazir, Richard M. (North Canton, CT); Rescorl, Robert L. (Vernon, CT); Harmon, Daryl L. (Enfield, CT)

    1998-01-01T23:59:59.000Z

    A method for generating a validated measurement of a process parameter at a point in time by using a plurality of individual sensor inputs from a scan of said sensors at said point in time. The sensor inputs from said scan are stored and a first validation pass is initiated by computing an initial average of all stored sensor inputs. Each sensor input is deviation checked by comparing each input including a preset tolerance against the initial average input. If the first deviation check is unsatisfactory, the sensor which produced the unsatisfactory input is flagged as suspect. It is then determined whether at least two of the inputs have not been flagged as suspect and are therefore considered good inputs. If two or more inputs are good, a second validation pass is initiated by computing a second average of all the good sensor inputs, and deviation checking the good inputs by comparing each good input including a present tolerance against the second average. If the second deviation check is satisfactory, the second average is displayed as the validated measurement and the suspect sensor as flagged as bad. A validation fault occurs if at least two inputs are not considered good, or if the second deviation check is not satisfactory. In the latter situation the inputs from each of all the sensors are compared against the last validated measurement and the value from the sensor input that deviates the least from the last valid measurement is displayed.

  2. A probabilistic graphical model based stochastic input model construction

    SciTech Connect (OSTI)

    Wan, Jiang [Materials Process Design and Control Laboratory, Sibley School of Mechanical and Aerospace Engineering, 101 Frank H.T. Rhodes Hall, Cornell University, Ithaca, NY 14853-3801 (United States); Zabaras, Nicholas, E-mail: nzabaras@gmail.com [Materials Process Design and Control Laboratory, Sibley School of Mechanical and Aerospace Engineering, 101 Frank H.T. Rhodes Hall, Cornell University, Ithaca, NY 14853-3801 (United States); Center for Applied Mathematics, 657 Frank H.T. Rhodes Hall, Cornell University, Ithaca, NY 14853-3801 (United States)

    2014-09-01T23:59:59.000Z

    Model reduction techniques have been widely used in modeling of high-dimensional stochastic input in uncertainty quantification tasks. However, the probabilistic modeling of random variables projected into reduced-order spaces presents a number of computational challenges. Due to the curse of dimensionality, the underlying dependence relationships between these random variables are difficult to capture. In this work, a probabilistic graphical model based approach is employed to learn the dependence by running a number of conditional independence tests using observation data. Thus a probabilistic model of the joint PDF is obtained and the PDF is factorized into a set of conditional distributions based on the dependence structure of the variables. The estimation of the joint PDF from data is then transformed to estimating conditional distributions under reduced dimensions. To improve the computational efficiency, a polynomial chaos expansion is further applied to represent the random field in terms of a set of standard random variables. This technique is combined with both linear and nonlinear model reduction methods. Numerical examples are presented to demonstrate the accuracy and efficiency of the probabilistic graphical model based stochastic input models. - Highlights: Data-driven stochastic input models without the assumption of independence of the reduced random variables. The problem is transformed to a Bayesian network structure learning problem. Examples are given in flows in random media.

  3. Structure of the complex of a yeast glucoamylase with acarbose reveals the presence of a raw starch binding site

    E-Print Network [OSTI]

    , shows clearly the influence of cryo-cooling, which is manifested in shrinkage of the mole- cule, one at the active site and the second at a site remote from the active site, curved around Tyr464. fibuligera IFO 0111, a raw starch-degrading enzyme, it is reason- able to expect the presence of the remote

  4. material consolidation

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilAElectronic Input Options Gary L. HirschOccurrencei-rapter | National|kcp4/%2A4/%2A

  5. Evaluation of severe accident risks: Quantification of major input parameters: MAACS (MELCOR Accident Consequence Code System) input

    SciTech Connect (OSTI)

    Sprung, J.L.; Jow, H-N (Sandia National Labs., Albuquerque, NM (USA)) [Sandia National Labs., Albuquerque, NM (USA); Rollstin, J.A. (GRAM, Inc., Albuquerque, NM (USA)) [GRAM, Inc., Albuquerque, NM (USA); Helton, J.C. (Arizona State Univ., Tempe, AZ (USA)) [Arizona State Univ., Tempe, AZ (USA)

    1990-12-01T23:59:59.000Z

    Estimation of offsite accident consequences is the customary final step in a probabilistic assessment of the risks of severe nuclear reactor accidents. Recently, the Nuclear Regulatory Commission reassessed the risks of severe accidents at five US power reactors (NUREG-1150). Offsite accident consequences for NUREG-1150 source terms were estimated using the MELCOR Accident Consequence Code System (MACCS). Before these calculations were performed, most MACCS input parameters were reviewed, and for each parameter reviewed, a best-estimate value was recommended. This report presents the results of these reviews. Specifically, recommended values and the basis for their selection are presented for MACCS atmospheric and biospheric transport, emergency response, food pathway, and economic input parameters. Dose conversion factors and health effect parameters are not reviewed in this report. 134 refs., 15 figs., 110 tabs.

  6. Cermet materials

    DOE Patents [OSTI]

    Kong, Peter C. (Idaho Falls, ID)

    2008-12-23T23:59:59.000Z

    A self-cleaning porous cermet material, filter and system utilizing the same may be used in filtering particulate and gaseous pollutants from internal combustion engines having intermetallic and ceramic phases. The porous cermet filter may be made from a transition metal aluminide phase and an alumina phase. Filler materials may be added to increase the porosity or tailor the catalytic properties of the cermet material. Additionally, the cermet material may be reinforced with fibers or screens. The porous filter may also be electrically conductive so that a current may be passed therethrough to heat the filter during use. Further, a heating element may be incorporated into the porous cermet filter during manufacture. This heating element can be coated with a ceramic material to electrically insulate the heating element. An external heating element may also be provided to heat the cermet filter during use.

  7. Composite material

    DOE Patents [OSTI]

    Hutchens, Stacy A. (Knoxville, TN); Woodward, Jonathan (Solihull, GB); Evans, Barbara R. (Oak Ridge, TN); O'Neill, Hugh M. (Knoxville, TN)

    2012-02-07T23:59:59.000Z

    A composite biocompatible hydrogel material includes a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa. A calcium comprising salt is disposed in at least some of the pores. The porous polymer matrix can comprise cellulose, including bacterial cellulose. The composite can be used as a bone graft material. A method of tissue repair within the body of animals includes the steps of providing a composite biocompatible hydrogel material including a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa, and inserting the hydrogel material into cartilage or bone tissue of an animal, wherein the hydrogel material supports cell colonization in vitro for autologous cell seeding.

  8. Fig. 1: Simulation setup in 3D domain (a). Single loop (b) with fixed capacitors (blue arrows) and ports (red arrows; square: input, circle

    E-Print Network [OSTI]

    were assigned to all materials and a series resistance was added to each fixed capacitor to account for component losses. The input/decoupling circuits were replaced by 50 Ohm ports (Fig 1b, 80 ports in total give the min/mean/max B1 + field [nT/V], inhomogeneity [%] and safety excitation efficiency (SEE [4

  9. Evaluation of severe accident risks: Quantification of major input parameters

    SciTech Connect (OSTI)

    Harper, F.T.; Payne, A.C.; Breeding, R.J.; Gorham, E.D.; Brown, T.D.; Rightley, G.S.; Gregory, J.J. (Sandia National Labs., Albuquerque, NM (USA)); Murfin, W. (Technadyne Engineering Consultants, Inc., Albuquerque, NM (USA)); Amos, C.N. (Science Applications International Corp., Albuquerque, NM (USA))

    1991-04-01T23:59:59.000Z

    This report records part of the vast amount of information received during the expert judgment elicitation process that took place in support of the NUREG-1150 effort sponsored by the U.S. Nuclear Regulatory Commission. The results of the Containment Loads and Molten Core/Containment Interaction Expert Panel Elicitation are presented in this part of Volume 2 of NUREG/CR-4551. The Containment Loads Expert Panel considered seven issues: (1) hydrogen phenomena at Grand Gulf; (2) hydrogen burn at vessel breach at Sequoyah; (3) BWR reactor building failure due to hydrogen; (4) Grand Gulf containment loads at vessel breach; (5) pressure increment in the Sequoyah containment at vessel breach; (6) loads at vessel breach: Surry; and (7) pressure increment in the Zion containment at vessel breach. The report begins with a brief discussion of the methods used to elicit the information from the experts. The information for each issue is then presented in five sections: (1) a brief definition of the issue, (2) a brief summary of the technical rationale supporting the distributions developed by each of the experts, (3) a brief description of the operations that the project staff performed on the raw elicitation results in order to aggregate the distributions, (4) the aggregated distributions, and (5) the individual expert elicitation summaries. The Molten Core/Containment Interaction Panel considered three issues. The results of the following two of these issues are presented in this document: (1) Peach Bottom drywell shell meltthrough; and (2) Grand Gulf pedestal erosion. 89 figs., 154 tabs.

  10. Inhalation Exposure Input Parameters for the Biosphere Model

    SciTech Connect (OSTI)

    M. Wasiolek

    2006-06-05T23:59:59.000Z

    This analysis is one of the technical reports that support the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), referred to in this report as the biosphere model. ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes in detail the conceptual model as well as the mathematical model and its input parameters. This report documents development of input parameters for the biosphere model that are related to atmospheric mass loading and supports the use of the model to develop biosphere dose conversion factors (BDCFs). The biosphere model is one of a series of process models supporting the total system performance assessment (TSPA) for a Yucca Mountain repository. ''Inhalation Exposure Input Parameters for the Biosphere Model'' is one of five reports that develop input parameters for the biosphere model. A graphical representation of the documentation hierarchy for the biosphere model is presented in Figure 1-1 (based on BSC 2006 [DIRS 176938]). This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling and how this analysis report contributes to biosphere modeling. This analysis report defines and justifies values of atmospheric mass loading for the biosphere model. Mass loading is the total mass concentration of resuspended particles (e.g., dust, ash) in a volume of air. Mass loading values are used in the air submodel of the biosphere model to calculate concentrations of radionuclides in air inhaled by a receptor and concentrations in air surrounding crops. Concentrations in air to which the receptor is exposed are then used in the inhalation submodel to calculate the dose contribution to the receptor from inhalation of contaminated airborne particles. Concentrations in air surrounding plants are used in the plant submodel to calculate the concentrations of radionuclides in foodstuffs contributed from uptake by foliar interception. This report is concerned primarily with the physical attributes of airborne particulate matter, such as the airborne concentrations of particles and their sizes. The conditions of receptor exposure (duration of exposure in various microenvironments), breathing rates, and dosimetry of inhaled particulates are discussed in more detail in ''Characteristics of the Receptor for the Biosphere Model'' (BSC 2005 [DIRS 172827]).

  11. Characterization of industrial process waste heat and input heat streams

    SciTech Connect (OSTI)

    Wilfert, G.L.; Huber, H.B.; Dodge, R.E.; Garrett-Price, B.A.; Fassbender, L.L.; Griffin, E.A.; Brown, D.R.; Moore, N.L.

    1984-05-01T23:59:59.000Z

    The nature and extent of industrial waste heat associated with the manufacturing sector of the US economy are identified. Industry energy information is reviewed and the energy content in waste heat streams emanating from 108 energy-intensive industrial processes is estimated. Generic types of process equipment are identified and the energy content in gaseous, liquid, and steam waste streams emanating from this equipment is evaluated. Matchups between the energy content of waste heat streams and candidate uses are identified. The resultant matrix identifies 256 source/sink (waste heat/candidate input heat) temperature combinations. (MHR)

  12. Analyzing the impacts of sales tax on agricultural inputs

    E-Print Network [OSTI]

    Lamar, Christina Helweg

    1992-01-01T23:59:59.000Z

    the needed revenue. Of the options analyzed, the imposition of a sales tax on previously exempted agricultural inputs was introduced. The purposes of this study were to estimate the impact of the loss of the saks tax exemption relative to a state income... budget shortfall in the 1992-93 biennium for the first time in its history. This situation caused legislators to consider possil&le options to raise the needed revenue. Of the options analyzed, the imposition of a sales tax on previously exempted...

  13. Refinery & Blenders Net Input of Crude Oil

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site.1 Relative Standard Errors for Table 1.1;"21 andNov-14Input

  14. Connecticut Natural Gas Input Supplemental Fuels (Million Cubic Feet)

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40Coal Stocks at CommercialDecadeReservesYear21Company LevelInput Supplemental

  15. Delaware Natural Gas Input Supplemental Fuels (Million Cubic Feet)

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40Coal Stocks at CommercialDecadeReservesYear21CompanySFoot) Year JanYearInput

  16. Florida Natural Gas Input Supplemental Fuels (Million Cubic Feet)

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40Coal Stocks at1,066,688Electricity UseFoot) Year Jan Feb Mar AprYear JanInput

  17. Hawaii Natural Gas Input Supplemental Fuels (Million Cubic Feet)

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40Coal Stocks at1,066,688ElectricityLess than 200Decade Year-0Year Jan Feb MarInput

  18. Iowa Natural Gas Input Supplemental Fuels (Million Cubic Feet)

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40Coal Stocks at1,066,688ElectricityLessApril 2015Year JanFoot) YearYearInput

  19. New Hampshire Natural Gas Input Supplemental Fuels (Million Cubic Feet)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for On-Highway4,1,50022,3,,,,6,1,9,1,50022,3,,,,6,1,Decade1 Source: Office of(Millionthrough,Cubic Foot) DecadeYear JanInput

  20. New York Natural Gas Input Supplemental Fuels (Million Cubic Feet)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for On-Highway4,1,50022,3,,,,6,1,9,1,50022,3,,,,6,1,Decade1 Source: Office(Billion CubicProductionFoot)Input Supplemental

  1. North Carolina Natural Gas Input Supplemental Fuels (Million Cubic Feet)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for On-Highway4,1,50022,3,,,,6,1,9,1,50022,3,,,,6,1,Decade1 Source: Office(BillionYear Jan Feb Mar Apr May1.878Input Supplemental

  2. North Dakota Natural Gas Input Supplemental Fuels (Million Cubic Feet)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for On-Highway4,1,50022,3,,,,6,1,9,1,50022,3,,,,6,1,Decade1 Source: Office(BillionYear Jan Feb Mar AprYearof OthersYearInput

  3. Rhode Island Natural Gas Input Supplemental Fuels (Million Cubic Feet)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for On-Highway4,1,50022,3,,,,6,1,9,1,50022,3,,,,6,1,Decade1 Source:Additions to Capacity ForYear Jan Feb Mar Apr May Jun JulInput

  4. Wisconsin Natural Gas Input Supplemental Fuels (Million Cubic Feet)

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5 Tables July 1996 Energy Information Administration Office ofthroughYear JanYearFuel5,266 6,090 7,16354,828Feet) DecadeDecadeInput

  5. Arkansas Natural Gas Input Supplemental Fuels (Million Cubic Feet)

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40Coal Stocks at CommercialDecade Year-0 Year-1Year% ofInput Supplemental Fuels

  6. Table 3. U.S. Inputs to biodiesel production

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1Stocks Nov-14Total Delivered Residentialtight oilU.S. Inputs to

  7. Massachusetts Natural Gas Input Supplemental Fuels (Million Cubic Feet)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for On-Highway4,1,50022,3,,,,6,1,9,1,50022,3,,,,6,1,Decade EnergyTennesseeYearUndergroundCubic Feet) Year Jan Feb MarInput

  8. Minnesota Natural Gas Input Supplemental Fuels (Million Cubic Feet)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for On-Highway4,1,50022,3,,,,6,1,9,1,50022,3,,,,6,1,Decade1 Source: Office of Fossil Energy, U.S. Department2Imports (NoYearInput

  9. South Carolina Natural Gas Input Supplemental Fuels (Million Cubic Feet)

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5 Tables July 1996 Energy Information Administration Office ofthroughYear Jan FebDecadeDecade Year-0 Year-1 Year-2 Year-3DecadeInput

  10. South Dakota Natural Gas Input Supplemental Fuels (Million Cubic Feet)

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5 Tables July 1996 Energy Information Administration Office ofthroughYear Jan FebDecadeDecade Year-0TotalH BV CYearInput Supplemental

  11. Louisiana Natural Gas Input Supplemental Fuels (Million Cubic Feet)

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5 Tables July 1996 Energy Information Administration Office of Coal,Cubic Feet)FuelDecade Year-0Input Supplemental Fuels (Million

  12. Maryland Natural Gas Input Supplemental Fuels (Million Cubic Feet)

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5 Tables July 1996 Energy Information Administration Office of Coal,Cubic Feet)FuelDecadePublication10.9919,923CubicFeet)Input

  13. Material Symbols

    E-Print Network [OSTI]

    Clark, Andy

    2006-01-01T23:59:59.000Z

    What is the relation between the material, conventional symbol structures that we encounter in the spoken and written word, and human thought? A common assumption, that structures a wide variety of otherwise competing ...

  14. Complex Materials

    ScienceCinema (OSTI)

    Cooper, Valentino

    2014-05-23T23:59:59.000Z

    Valentino Cooper uses some of the world's most powerful computing to understand how materials work at subatomic levels, studying breakthroughs such as piezoelectrics, which convert mechanical stress to electrical energy.

  15. Input-output multiplier distributions from probabilistic production paths

    SciTech Connect (OSTI)

    Konecny, R.T.

    1987-01-01T23:59:59.000Z

    In the standard Leontief input-output model, a single dominant technology is assumed in the production of a particular commodity. However, in the real world, quite similar commodities are produced by firms with vastly different technologies. In addressing this limitation, the Probabilistic Production Path model (PPP) is used to investigate both the method of production and identity of the producer. An important feature of the PPP model is the consideration of the effects that heterogeneous technologies and dissimilar trade patterns have on the properties of the distribution of input-output multipliers. The derivation of the distribution of output multipliers is generalized for discrete probabilities based on market shares. Due to the complexity of the generalized solution, a simulation model is used to approximate the multiplier distribution. Results of the model show that the distributional properties of the multipliers are unpredictable, with the majority of the distributions being multimodal. Typically, the mean of the multipliers lies in a trough between two modes. Multimodal multiplier distributions were found to have a tighter symmetric interval than the corresponding standard normal confidence interval. Therefore, the use of the normal confidence interval appears to be sufficient, though overstated, for the construction of confidence intervals in the PPP model.

  16. RF Input Power Couplers for High Current SRF Applications

    SciTech Connect (OSTI)

    Khan, V. F. [Helmholtz Zentrum Berlin, Germany; Anders, W. [Helmholtz Zentrum Berlin, Germany; Burrill, Andrew [Helmholtz Zentrum Berlin, Germany; Knobloch, Jens [Helmholtz Zentrum Berlin, Germany; Kugeler, Oliver [Helmholtz Zentrum Berlin, Germany; Neumann, Axel [Helmholtz Zentrum Berlin, Germany; Wang, Haipeng [JLAB

    2014-12-01T23:59:59.000Z

    High current SRF technology is being explored in present day accelerator science. The bERLinPro project is presently being built at HZB to address the challenges involved in high current SRF machines with the goal of generating and accelerating a 100 mA electron beam to 50 MeV in continuous wave (cw) mode at 1.3 GHz. One of the main challenges in this project is that of handling the high input RF power required for the photo-injector as well as booster cavities where there is no energy recovery process. A high power co-axial input power coupler is being developed to be used for the photo-injector and booster cavities at the nominal beam current. The coupler is based on the KEKcERL design and has been modified to minimise the penetration of the coupler tip in the beam pipe without compromising on beam-power coupling (Qext ~105). Herein we report on the RF design of the high power (115 kW per coupler, dual couplers per cavity) bERLinPro (BP) coupler along with initial results on thermal calculations. We summarise the RF conditioning of the TTF-III couplers (modified for cw operation) performed in the past at BESSY/HZB. A similar conditioning is envisaged in the near future for the low current SRF photo-injector and the bERLinPro main linac cryomodule.

  17. Hardfacing material

    DOE Patents [OSTI]

    Branagan, Daniel J. (Iona, ID)

    2012-01-17T23:59:59.000Z

    A method of producing a hard metallic material by forming a mixture containing at least 55% iron and at least one of boron, carbon, silicon and phosphorus. The mixture is formed into an alloy and cooled to form a metallic material having a hardness of greater than about 9.2 GPa. The invention includes a method of forming a wire by combining a metal strip and a powder. The metal strip and the powder are rolled to form a wire containing at least 55% iron and from two to seven additional elements including at least one of C, Si and B. The invention also includes a method of forming a hardened surface on a substrate by processing a solid mass to form a powder, applying the powder to a surface to form a layer containing metallic glass, and converting the glass to a crystalline material having a nanocrystalline grain size.

  18. Soil-related Input Parameters for the Biosphere Model

    SciTech Connect (OSTI)

    A. J. Smith

    2003-07-02T23:59:59.000Z

    This analysis is one of the technical reports containing documentation of the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN), a biosphere model supporting the Total System Performance Assessment (TSPA) for the geologic repository at Yucca Mountain. The biosphere model is one of a series of process models supporting the Total System Performance Assessment (TSPA) for the Yucca Mountain repository. A graphical representation of the documentation hierarchy for the ERMYN biosphere model is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling, and the plan for development of the biosphere abstraction products for TSPA, as identified in the ''Technical Work Plan: for Biosphere Modeling and Expert Support'' (BSC 2003 [163602]). It should be noted that some documents identified in Figure 1-1 may be under development at the time this report is issued and therefore not available. This figure is included to provide an understanding of how this analysis report contributes to biosphere modeling in support of the license application, and is not intended to imply that access to the listed documents is required to understand the contents of this report. This report, ''Soil Related Input Parameters for the Biosphere Model'', is one of the five analysis reports that develop input parameters for use in the ERMYN model. This report is the source documentation for the six biosphere parameters identified in Table 1-1. ''The Biosphere Model Report'' (BSC 2003 [160699]) describes in detail the conceptual model as well as the mathematical model and its input parameters. The purpose of this analysis was to develop the biosphere model parameters needed to evaluate doses from pathways associated with the accumulation and depletion of radionuclides in the soil. These parameters support the calculation of radionuclide concentrations in soil from on-going irrigation and ash deposition and, as a direct consequence, radionuclide concentration in resuspended particulate matter in the atmosphere. The analysis was performed in accordance with the technical work plan for the biosphere modeling and expert support (TWP) (BSC 2003 [163602]). This analysis revises the previous one titled ''Evaluate Soil/Radionuclide Removal by Erosion and Leaching'' (CRWMS M&O 2001 [152517]). In REV 00 of this report, the data generated were fixed (i.e., taking no account of uncertainty and variability) values. This revision incorporates uncertainty and variability into the values for the bulk density, elemental partition coefficients, average annual loss of soil from erosion, resuspension enhancement factor, and field capacity water content.

  19. Material Issues for the US ITER-TBM Program Part I: US Strategy and Outline of Suggested Material EffortPart I: US Strategy and Outline of Suggested Material Effort

    E-Print Network [OSTI]

    Abdou, Mohamed

    EffortPart I: US Strategy and Outline of Suggested Material Effort Presented by: Mohamed Abdou With input from the US ITER-TBM Team, including M. Abdou, D. Sze, M. Sawan, A. Ying, C. Wong, N. Morley, S. Malang

  20. Materials Science

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHighand Retrievals from a New 183-GHzMARSecurityMaterials Science Materials

  1. Phase Noise in MIMO Systems: Bayesian Cramer-Rao Bounds and Soft-Input Estimation

    E-Print Network [OSTI]

    Nasir, Ali A; Mehrpouyan, Hani; Schober, Robert; Hua, Yingbo

    2013-01-01T23:59:59.000Z

    for a 4 4 MIMO system, the proposed soft-input EKF-EKSin MIMO Systems: Bayesian CramrRao Bounds and Soft-Inputof a MIMO system employing the proposed soft-input EKF-EKS

  2. Spatial Interference Mitigation for Multiple Input Multiple Output Ad Hoc Networks: MISO Gains

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    Spatial Interference Mitigation for Multiple Input Multiple Output Ad Hoc Networks: MISO Gains beamforming for a multiple input single output (MISO) ad hoc network to increase the density of successful

  3. V-124: Splunk Web Input Validation Flaw Permits Cross-Site Scripting...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4: Splunk Web Input Validation Flaw Permits Cross-Site Scripting Attacks V-124: Splunk Web Input Validation Flaw Permits Cross-Site Scripting Attacks April 2, 2013 - 1:13am Addthis...

  4. Calibration of a Distributed Flood Forecasting Model with Input Uncertainty Using a Bayesian Framework

    E-Print Network [OSTI]

    Hubbard, Susan

    Calibration of a Distributed Flood Forecasting Model with Input Uncertainty Using a Bayesian, Berkeley, CA, United States. In the process of calibrating distributed hydrological models, accounting in calibrating GBHM parameters and in estimating their associated uncertainty. The calibration ignoring input

  5. Methods for Rapid Estimation of Motor Input Power in HVAC Assessments

    E-Print Network [OSTI]

    Christman, Kevin D.

    2011-08-08T23:59:59.000Z

    In preliminary building energy assessments, it is often desired to estimate a motor's input power. Motor power estimates in this context should be rapid, safe, and noninvasive. Existing methods for motor input power estimation, such as direct...

  6. BETO Seeks Stakeholder Input on the Use of Advanced Biofuel Blends...

    Energy Savers [EERE]

    BETO Seeks Stakeholder Input on the Use of Advanced Biofuel Blends in Small Engines BETO Seeks Stakeholder Input on the Use of Advanced Biofuel Blends in Small Engines June 22,...

  7. INTERCOMPARISON STUDY OF ELEMENTAL ABUNDANCES IN RAW AND SPENT OIL SHALES

    E-Print Network [OSTI]

    Fox, J.P.

    2011-01-01T23:59:59.000Z

    W. A. Robb, and T. J. Spedding. Minor Elements ~n Oil Shaleand Oil-Shale Products. LERC RI-77/1, 1977. Wildeman, T. R.H. Meglen. The Analysis of Oil-Shale Materials for Element

  8. INTERCOMPARISON STUDY OF ELEMENTAL ABUNDANCES IN RAW AND SPENT OIL SHALES

    E-Print Network [OSTI]

    Fox, J.P.

    2011-01-01T23:59:59.000Z

    Minor Elements ~n Oil Shale and Oil-Shale Products. LERC RI-Analytical Chemistry of Oil Shale and Tar Sands. Advan. inH. Meglen. The Analysis of Oil-Shale Materials for Element

  9. The design of efficient input circuits for class C amplifiers

    E-Print Network [OSTI]

    Fristoe, Harold T.

    1953-01-01T23:59:59.000Z

    the design of efficient input circuits for c u s s c amplifiers t heddsigngeof cpi utramh lX jr?cla? t??io?s? nd go dg??s nf? ?ofgsfg ??e usn? o? ??s?gie?n? ?f?efssief? hs?nig ?sfg theds igno lu? h?c??? fc ?jj?????l ????l ??r???lc jar ??cc...????????cXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ?? ?X ?a??m?c?a?cXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ?? t??sf?e? ? ? c???ni? o? g?s hsde?f ?io?s??is ? ? ? ? ? ? ? ? ? ? ?? m?cl aj j???r?c je??is ?n?s ?X l?s ?ofdgnfg ??iisfg ?ofdgi??geof ?oi hsgsi?efef? ??ndd ? a...

  10. Soil-Related Input Parameters for the Biosphere Model

    SciTech Connect (OSTI)

    A. J. Smith

    2004-09-09T23:59:59.000Z

    This report presents one of the analyses that support the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN). The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes the details of the conceptual model as well as the mathematical model and the required input parameters. The biosphere model is one of a series of process models supporting the postclosure Total System Performance Assessment (TSPA) for the Yucca Mountain repository. A schematic representation of the documentation flow for the Biosphere input to TSPA is presented in Figure 1-1. This figure shows the evolutionary relationships among the products (i.e., analysis and model reports) developed for biosphere modeling, and the biosphere abstraction products for TSPA, as identified in the ''Technical Work Plan for Biosphere Modeling and Expert Support'' (TWP) (BSC 2004 [DIRS 169573]). This figure is included to provide an understanding of how this analysis report contributes to biosphere modeling in support of the license application, and is not intended to imply that access to the listed documents is required to understand the contents of this report. This report, ''Soil-Related Input Parameters for the Biosphere Model'', is one of the five analysis reports that develop input parameters for use in the ERMYN model. This report is the source documentation for the six biosphere parameters identified in Table 1-1. The purpose of this analysis was to develop the biosphere model parameters associated with the accumulation and depletion of radionuclides in the soil. These parameters support the calculation of radionuclide concentrations in soil from on-going irrigation or ash deposition and, as a direct consequence, radionuclide concentration in other environmental media that are affected by radionuclide concentrations in soil. The analysis was performed in accordance with the TWP (BSC 2004 [DIRS 169573]) where the governing procedure was defined as AP-SIII.9Q, ''Scientific Analyses''. This analysis revises the previous version with the same name (BSC 2003 [DIRS 161239]), which was itself a revision of one titled ''Evaluate Soil/Radionuclide Removal by Erosion and Leaching'' (CRWMS M&O 2001 [DIRS 152517]). In Revision 00 of this report, the data generated were fixed values (i.e., taking no account of uncertainty and variability). Revision 01 (BSC 2003 [DIRS 161239]) incorporated uncertainty and variability into the values for the bulk density, elemental partition coefficients, average annual loss of soil from erosion, resuspension enhancement factor, and field capacity water content. The current revision of this document improves the transparency and traceability of the products without changing the details of the analysis. This analysis report supports the treatment of six of the features, events, and processes (FEPs) applicable to the Yucca Mountain reference biosphere (DTN: MO0407SEPFEPLA.000 [DIRS 170760]). The use of the more recent FEP list in DTN: MO0407SEPFEPLA.000 [DIRS 170760] represents a deviation from the detail provided in the TWP (BSC 2004 [DIRS 169573]), which referenced a previous version of the FEP list. The parameters developed in this report support treatment of these six FEPs addressed in the biosphere model that are listed in Table 1-1. Inclusion and treatment of FEPs in the biosphere model is described in the ''Biosphere Model Report'' (BSC 2004 [DIRS 169460], Section 6.2).

  11. Long term materials test program. Preliminary operations plan

    SciTech Connect (OSTI)

    None

    1980-03-01T23:59:59.000Z

    The Long Term Materials Testing (LTMT) PFB facility has been designed to duplicate the design point condition of the Coal-Fired Combined Cycle (CFCC) reference commercial plant design developed by GE under contract to DOE, including bed temperature (1750/sup 0/F), pressure (10 atm), excess air (20%), and gas residence time (1.8 sec). The test rig has a one foot diameter bed and consumes about 1.6 tons/day of coal and 0.5 tons/day of dolomite sulphur sorbent. Material specimens are contained in two test sections. The low velocity test section houses 132 pin specimens 1/4 dia., sixty of which can be cooled below the gas stream temperature. The nominal exposure environment of 1650/sup 0/F, 10 atm, 27 fps should ensure representative corrosive conditions, without erosion. The control system for the LTMT facility is designed to operate the rig in such a manner that the test specimens are subjected to constant, controlled conditions representative of the actual service environment. The Preliminary Test Plan presented in Section V outlines three phases of PFB testing, plus screening tests for candidate materials. Operating costs have been updated to reflect the preliminary rig design data and current raw material quotes. The projected operating costs have been effected by raw material costs since the time of the original estimate, but the overall cost per hour of test is still very low: $122/test hour.

  12. Materials compatibility.

    SciTech Connect (OSTI)

    Somerday, Brian P.

    2010-04-01T23:59:59.000Z

    Objectives are to enable development and implementation of codes and standards for H{sub 2} containment components: (1) Evaluate data on mechanical properties of materials in H{sub 2} gas - Technical Reference on Hydrogen Compatibility of Materials; (2) Generate new benchmark data on high-priority materials - Pressure vessel steels, stainless steels; and (3) Establish procedures for reliable materials testing - Sustained-load cracking, fatigue crack propagation. Summary of this presentation are: (1) Completed measurement of cracking thresholds (K{sub TH}) for Ni-Cr-Mo pressure vessel steels in high-pressure H{sub 2} gas - K{sub TH} measurements required in ASME Article KD-10 (2) Crack arrest test methods appear to yield non-conservative results compared to crack initiation test methods - (a) Proposal to insert crack initiation test methods in Article KD-10 will be presented to ASME Project Team on Hydrogen Tanks, and (b) Crack initiation methods require test apparatus designed for dynamic loading of specimens in H{sub 2} gas; and (3) Demonstrated ability to measure fatigue crack growth of pressure vessel steels in high-pressure H{sub 2} gas - (a) Fatigue crack growth data in H{sub 2} required in ASME Article KD-10, and (b) Test apparatus is one of few in U.S. or abroad for measuring fatigue crack growth in >100 MPa H{sub 2} gas.

  13. Soft-Input Soft-Output King Decoder for Coded MIMO Wireless Communications

    E-Print Network [OSTI]

    Soft-Input Soft-Output King Decoder for Coded MIMO Wireless Communications Giuseppe PAPA, Domenico,{domenico.ciuonzo,gianmarco.romano,pierluigi.salvorossi}@unina2.it Abstract--This paper presents a Soft-Input Soft-Output (SISO) version of the King Decoder (KD for Multiple-Input Multiple-Output (MIMO) communication systems. More specifically, four versions of the KD

  14. On the Wind Power Input to the Ocean General Circulation XIAOMING ZHAI

    E-Print Network [OSTI]

    Johnson, Helen

    On the Wind Power Input to the Ocean General Circulation XIAOMING ZHAI Atmospheric, Oceanic January 2012, in final form 3 May 2012) ABSTRACT The wind power input to the ocean general circulation is usually calculated from the time-averaged wind products. Here, this wind power input is reexamined using

  15. Making Gestural Input from Arm-Worn Inertial Sensors More Practical

    E-Print Network [OSTI]

    Rajamani, Sriram K.

    .g., in a wristwatch) can sense arm gestures, enabling natural input in untethered scenarios. Two core components input with a wide variety of applications is arm movement detected by inertial sensors embedded transformation of the input space. For example, two users of different heights per- forming the same gesture

  16. Enniatin B-induced cell death and inflammatory responses in RAW 267.4 murine macrophages

    SciTech Connect (OSTI)

    Gammelsrud, A. [Norwegian Veterinary Institute, P.O. Box 750, Centrum, N-0106 Oslo (Norway) [Norwegian Veterinary Institute, P.O. Box 750, Centrum, N-0106 Oslo (Norway); Department of Air Pollution and Noise, Division of Environmental Medicine, Norwegian Institute of Public Health, N-0403 Oslo (Norway); Solhaug, A. [Norwegian Veterinary Institute, P.O. Box 750, Centrum, N-0106 Oslo (Norway)] [Norwegian Veterinary Institute, P.O. Box 750, Centrum, N-0106 Oslo (Norway); Dendel, B. [EA 4427 SeRAIC, IRSET, Universit de Rennes 1, IFR 140, Rennes (France)] [EA 4427 SeRAIC, IRSET, Universit de Rennes 1, IFR 140, Rennes (France); Sandberg, W.J. [Department of Air Pollution and Noise, Division of Environmental Medicine, Norwegian Institute of Public Health, N-0403 Oslo (Norway)] [Department of Air Pollution and Noise, Division of Environmental Medicine, Norwegian Institute of Public Health, N-0403 Oslo (Norway); Ivanova, L. [Norwegian Veterinary Institute, P.O. Box 750, Centrum, N-0106 Oslo (Norway)] [Norwegian Veterinary Institute, P.O. Box 750, Centrum, N-0106 Oslo (Norway); Kocbach Blling, A. [Department of Air Pollution and Noise, Division of Environmental Medicine, Norwegian Institute of Public Health, N-0403 Oslo (Norway)] [Department of Air Pollution and Noise, Division of Environmental Medicine, Norwegian Institute of Public Health, N-0403 Oslo (Norway); Lagadic-Gossmann, D. [EA 4427 SeRAIC, IRSET, Universit de Rennes 1, IFR 140, Rennes (France)] [EA 4427 SeRAIC, IRSET, Universit de Rennes 1, IFR 140, Rennes (France); Refsnes, M.; Becher, R. [Department of Air Pollution and Noise, Division of Environmental Medicine, Norwegian Institute of Public Health, N-0403 Oslo (Norway)] [Department of Air Pollution and Noise, Division of Environmental Medicine, Norwegian Institute of Public Health, N-0403 Oslo (Norway); Eriksen, G. [Norwegian Veterinary Institute, P.O. Box 750, Centrum, N-0106 Oslo (Norway)] [Norwegian Veterinary Institute, P.O. Box 750, Centrum, N-0106 Oslo (Norway); Holme, J.A., E-mail: jorn.holme@fhi.no [Department of Air Pollution and Noise, Division of Environmental Medicine, Norwegian Institute of Public Health, N-0403 Oslo (Norway)

    2012-05-15T23:59:59.000Z

    The mycotoxin enniatin B (EnnB) is predominantly produced by species of the Fusarium genera, and often found in grain. The cytotoxic effect of EnnB has been suggested to be related to its ability to form ionophores in cell membranes. The present study examines the effects of EnnB on cell death, differentiation, proliferation and pro-inflammatory responses in the murine monocytemacrophage cell line RAW 264.7. Exposure to EnnB for 24 h caused an accumulation of cells in the G0/G1-phase with a corresponding decrease in cyclin D1. This cell cycle-arrest was possibly also linked to the reduced cellular ability to capture and internalize receptors as illustrated by the lipid marker ganglioside GM1. EnnB also increased the number of apoptotic, early apoptotic and necrotic cells, as well as cells with elongated spindle-like morphology. The Neutral Red assay indicated that EnnB induced lysosomal damage; supported by transmission electron microscopy (TEM) showing accumulation of lipids inside the lysosomes forming lamellar structures/myelin bodies. Enhanced levels of activated caspase-1 were observed after EnnB exposure and the caspase-1 specific inhibitor ZYVAD-FMK reduced EnnB-induced apoptosis. Moreover, EnnB increased the release of interleukin-1beta (IL-1?) in cells primed with lipopolysaccharide (LPS), and this response was reduced by both ZYVAD-FMK and the cathepsin B inhibitor CA-074Me. In conclusion, EnnB was found to induce cell cycle arrest, cell death and inflammation. Caspase-1 appeared to be involved in the apoptosis and release of IL-1? and possibly activation of the inflammasome through lysosomal damage and leakage of cathepsin B. -- Highlights: ? The mycotoxin EnnB induced cell cycle arrest, cell death and inflammation. ? The G0/G1-arrest was linked to a reduced ability to internalize receptors. ? EnnB caused lysosomal damage, leakage of cathepsin B and caspase-1 cleavage. ? Caspase-1 was partly involved in both apoptosis and release of IL-1?. ? There was a synergistic action between EnnB and bacterial LPS.

  17. Environmental Transport Input Parameters for the Biosphere Model

    SciTech Connect (OSTI)

    M. A. Wasiolek

    2003-06-27T23:59:59.000Z

    This analysis report is one of the technical reports documenting the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN), a biosphere model supporting the total system performance assessment (TSPA) for the geologic repository at Yucca Mountain. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows relationships among the reports developed for biosphere modeling and biosphere abstraction products for the TSPA, as identified in the ''Technical Work Plan: for Biosphere Modeling and Expert Support'' (TWP) (BSC 2003 [163602]). Some documents in Figure 1-1 may be under development and not available when this report is issued. This figure provides an understanding of how this report contributes to biosphere modeling in support of the license application (LA), but access to the listed documents is not required to understand the contents of this report. This report is one of the reports that develops input parameter values for the biosphere model. The ''Biosphere Model Report'' (BSC 2003 [160699]) describes the conceptual model, the mathematical model, and the input parameters. The purpose of this analysis is to develop biosphere model parameter values related to radionuclide transport and accumulation in the environment. These parameters support calculations of radionuclide concentrations in the environmental media (e.g., soil, crops, animal products, and air) resulting from a given radionuclide concentration at the source of contamination (i.e., either in groundwater or volcanic ash). The analysis was performed in accordance with the TWP (BSC 2003 [163602]). This analysis develops values of parameters associated with many features, events, and processes (FEPs) applicable to the reference biosphere (DTN: M00303SEPFEPS2.000 [162452]), which are addressed in the biosphere model (BSC 2003 [160699]). The treatment of these FEPs is described in BSC (2003 [160699], Section 6.2). Parameter values developed in this report, and the related FEPs, are listed in Table 1-1. The relationship between the parameters and FEPs was based on a comparison of the parameter definition and the FEP descriptions as presented in BSC (2003 [160699], Section 6.2). The parameter values developed in this report support the biosphere model and are reflected in the TSPA through the biosphere dose conversion factors (BDCFs). Biosphere modeling focuses on radionuclides screened for the TSPA-LA (BSC 2002 [160059]). The same list of radionuclides is used in this analysis (Section 6.1.4). The analysis considers two human exposure scenarios (groundwater and volcanic ash) and climate change (Section 6.1.5). This analysis combines and revises two previous reports, ''Transfer Coefficient Analysis'' (CRWMS M&O 2000 [152435]) and ''Environmental Transport Parameter Analysis'' (CRWMS M&O 2001 [152434]), because the new ERMYN biosphere model requires a redefined set of input parameters. The scope of this analysis includes providing a technical basis for the selection of radionuclide- and element-specific biosphere parameters (except for Kd) that are important for calculating BDCFs based on the available radionuclide inventory abstraction data. The environmental transport parameter values were developed specifically for use in the biosphere model and may not be appropriate for other applications.

  18. Quantitative Characterization of Nanostructured Materials

    SciTech Connect (OSTI)

    Dr. Frank (Bud) Bridges, University of California-Santa Cruz

    2010-08-05T23:59:59.000Z

    The two-and-a-half day symposium on the "Quantitative Characterization of Nanostructured Materials" will be the first comprehensive meeting on this topic held under the auspices of a major U.S. professional society. Spring MRS Meetings provide a natural venue for this symposium as they attract a broad audience of researchers that represents a cross-section of the state-of-the-art regarding synthesis, structure-property relations, and applications of nanostructured materials. Close interactions among the experts in local structure measurements and materials researchers will help both to identify measurement needs pertinent to ??real-world? materials problems and to familiarize the materials research community with the state-of-the-art local structure measurement techniques. We have chosen invited speakers that reflect the multidisciplinary and international nature of this topic and the need to continually nurture productive interfaces among university, government and industrial laboratories. The intent of the symposium is to provide an interdisciplinary forum for discussion and exchange of ideas on the recent progress in quantitative characterization of structural order in nanomaterials using different experimental techniques and theory. The symposium is expected to facilitate discussions on optimal approaches for determining atomic structure at the nanoscale using combined inputs from multiple measurement techniques.

  19. Advanced materials: Information and analysis needs

    SciTech Connect (OSTI)

    Curlee, T.R.; Das, S.; Lee, R.; Trumble, D.

    1990-09-01T23:59:59.000Z

    This report presents the findings of a study to identify the types of information and analysis that are needed for advanced materials. The project was sponsored by the US Bureau of Mines (BOM). It includes a conceptual description of information needs for advanced materials and the development and implementation of a questionnaire on the same subject. This report identifies twelve fundamental differences between advanced and traditional materials and discusses the implications of these differences for data and analysis needs. Advanced and traditional materials differ significantly in terms of physical and chemical properties. Advanced material properties can be customized more easily. The production of advanced materials may differ from traditional materials in terms of inputs, the importance of by-products, the importance of different processing steps (especially fabrication), and scale economies. The potential for change in advanced materials characteristics and markets is greater and is derived from the marriage of radically different materials and processes. In addition to the conceptual study, a questionnaire was developed and implemented to assess the opinions of people who are likely users of BOM information on advanced materials. The results of the questionnaire, which was sent to about 1000 people, generally confirm the propositions set forth in the conceptual part of the study. The results also provide data on the categories of advanced materials and the types of information that are of greatest interest to potential users. 32 refs., 1 fig., 12 tabs.

  20. Energy Materials & Processes | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Materials & Processes Overview Atmospheric Aerosol Systems Biosystem Dynamics & Design Energy Materials & Processes Terrestrial & Subsurface Ecosystems Energy Materials &...

  1. Interface module for transverse energy input to dye laser modules

    DOE Patents [OSTI]

    English, R.E. Jr.; Johnson, S.A.

    1994-10-11T23:59:59.000Z

    An interface module for transverse energy input to dye laser modules is provided particularly for the purpose of delivering enhancing transverse energy beams in the form of illumination bar to the lasing zone of a dye laser device, in particular to a dye laser amplifier. The preferred interface module includes an optical fiber array having a plurality of optical fibers arrayed in a co-planar fashion with their distal ends receiving coherent laser energy from an enhancing laser source, and their proximal ends delivered into a relay structure. The proximal ends of the optical fibers are arrayed so as to be coplanar and to be aimed generally at a common point. The transverse energy beam array delivered from the optical fiber array is acted upon by an optical element array to produce an illumination bar which has a cross section in the form of a elongated rectangle at the position of the lasing window. The illumination bar is selected to have substantially uniform intensity throughout. 5 figs.

  2. Energy Materials Coordinating Committee, fiscal year 1997. Annual technical report

    SciTech Connect (OSTI)

    NONE

    1998-07-31T23:59:59.000Z

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department`s materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations. This report summarizes EMaCC activities for FY 1997 and describes the materials research programs of various offices and divisions within the Department.

  3. Alloy materials

    DOE Patents [OSTI]

    Hans Thieme, Cornelis Leo (Westborough, MA); Thompson, Elliott D. (Coventry, RI); Fritzemeier, Leslie G. (Acton, MA); Cameron, Robert D. (Franklin, MA); Siegal, Edward J. (Malden, MA)

    2002-01-01T23:59:59.000Z

    An alloy that contains at least two metals and can be used as a substrate for a superconductor is disclosed. The alloy can contain an oxide former. The alloy can have a biaxial or cube texture. The substrate can be used in a multilayer superconductor, which can further include one or more buffer layers disposed between the substrate and the superconductor material. The alloys can be made a by process that involves first rolling the alloy then annealing the alloy. A relatively large volume percentage of the alloy can be formed of grains having a biaxial or cube texture.

  4. Construction material

    DOE Patents [OSTI]

    Wagh, Arun S. (Orland Park, IL); Antink, Allison L. (Bolingbrook, IL)

    2008-07-22T23:59:59.000Z

    A structural material of a polystyrene base and the reaction product of the polystyrene base and a solid phosphate ceramic is applied as a slurry which includes one or more of a metal oxide or a metal hydroxide with a source of phosphate to produce a phosphate ceramic and a poly (acrylic acid or acrylate) or combinations or salts thereof and polystyrene or MgO applied to the polystyrene base and allowed to cure so that the dried aqueous slurry chemically bonds to the polystyrene base. A method is also disclosed of applying the slurry to the polystyrene base.

  5. Materials Science

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > The EnergyCenter (LMI-EFRC) -PublicationsMaterials Science

  6. Material Misfits

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated Codes |IsLove Your Home andDisposition | National NuclearMaterial Misfits

  7. The research and development in the Ma-terials Research Department has as its

    E-Print Network [OSTI]

    to improve the per- formance of products and materials of the future. The Department receives input through research-based company. In another research area, spray forming of metals was advanced also to include

  8. Solar synthesis of advanced materials: A solar industrial program initiative

    SciTech Connect (OSTI)

    Lewandowski, A.

    1992-06-01T23:59:59.000Z

    This is an initiative for accelerating the use of solar energy in the advanced materials manufacturing industry in the United States. The initiative will be based on government-industry collaborations that will develop the technology and help US industry compete in the rapidly expanding global advanced materials marketplace. Breakthroughs in solar technology over the last 5 years have created exceptional new tools for developing advanced materials. Concentrated sunlight from solar furnaces can produce intensities that approach those on the surface of the sun and can generate temperatures well over 2000{degrees}C. Very thin layers of illuminated surfaces can be driven to remarkably high temperatures in a fraction of a second. Concentrated solar energy can be delivered over large areas, allowing for rapid processing and high production rates. By using this technology, researchers are transforming low-cost raw materials into high-performance products. Solar synthesis of advanced materials uses bulk materials and energy more efficiently, lowers processing costs, and reduces the need for strategic materials -- all with a technology that does not harm the environment. The Solar Industrial Program has built a unique, world class solar furnace at NREL to help meet the growing need for applied research in advanced materials. Many new advanced materials processes have been successfully demonstrated in this facility, including the following: Metalorganic deposition, ceramic powders, diamond-like carbon materials, rapid heat treating, and cladding (hard coating).

  9. Photovoltaic Materials

    SciTech Connect (OSTI)

    Duty, C.; Angelini, J.; Armstrong, B.; Bennett, C.; Evans, B.; Jellison, G. E.; Joshi, P.; List, F.; Paranthaman, P.; Parish, C.; Wereszczak, A.

    2012-10-15T23:59:59.000Z

    The goal of the current project was to help make the US solar industry a world leader in the manufacture of thin film photovoltaics. The overall approach was to leverage ORNLs unique characterization and processing technologies to gain a better understanding of the fundamental challenges for solar cell processing and apply that knowledge to targeted projects with industry members. ORNL has the capabilities in place and the expertise required to understand how basic material properties including defects, impurities, and grain boundaries affect the solar cell performance. ORNL also has unique processing capabilities to optimize the manufacturing process for fabrication of high efficiency and low cost solar cells. ORNL recently established the Center for Advanced Thin-film Systems (CATS), which contains a suite of optical and electrical characterization equipment specifically focused on solar cell research. Under this project, ORNL made these facilities available to industrial partners who were interested in pursuing collaborative research toward the improvement of their product or manufacturing process. Four specific projects were pursued with industrial partners: Global Solar Energy is a solar industry leader in full scale production manufacturing highly-efficient Copper Indium Gallium diSelenide (CIGS) thin film solar material, cells and products. ORNL worked with GSE to develop a scalable, non-vacuum, solution technique to deposit amorphous or nanocrystalline conducting barrier layers on untextured stainless steel substrates for fabricating high efficiency flexible CIGS PV. Ferro Corporations Electronic, Color and Glass Materials (ECGM) business unit is currently the worlds largest supplier of metallic contact materials in the crystalline solar cell marketplace. Ferros ECGM business unit has been the world's leading supplier of thick film metal pastes to the crystalline silicon PV industry for more than 30 years, and has had operational cells and modules in the field for 25 years. Under this project, Ferro leveraged world leading analytical capabilities at ORNL to characterize the paste-to-silicon interface microstructure and develop high efficiency next generation contact pastes. Ampulse Corporation is developing a revolutionary crystalline-silicon (c-Si) thin-film solar photovoltaic (PV) technology. Utilizing uniquely-textured substrates and buffer materials from the Oak Ridge National Laboratory (ORNL), and breakthroughs in Hot-Wire Chemical Vapor Deposition (HW-CVD) techniques in epitaxial silicon developed at the National Renewable Energy Laboratory (NREL), Ampulse is creating a solar technology that is tunable in silicon thickness, and hence in efficiency and economics, to meet the specific requirements of multiple solar PV applications. This project focused on the development of a high rate deposition process to deposit Si, Ge, and Si1-xGex films as an alternate to hot-wire CVD. Mossey Creek Solar is a start-up company with great expertise in the solar field. The primary interest is to create and preserve jobs in the solar sector by developing high-yield, low-cost, high-efficiency solar cells using MSC-patented and -proprietary technologies. The specific goal of this project was to produce large grain formation in thin, net-shape-thickness mc-Si wafers processed with high-purity silicon powder and ORNL's plasma arc lamp melting without introducing impurities that compromise absorption coefficient and carrier lifetime. As part of this project, ORNL also added specific pieces of equipment to enhance our ability to provide unique insight for the solar industry. These capabilities include a moisture barrier measurement system, a combined physical vapor deposition and sputtering system dedicated to cadmium-containing deposits, adeep level transient spectroscopy system useful for identifying defects, an integrating sphere photoluminescence system, and a high-speed ink jet printing system. These tools were combined with others to study the effect of defects on the performance of crystalline silicon and

  10. T-670: Skype Input Validation Flaw in 'mobile phone' Profile Entry Permits Cross-Site Scripting Attacks

    Broader source: Energy.gov [DOE]

    The software does not properly filter HTML code from user-supplied input in the The "mobile phone" profile entry before displaying the input.

  11. Materials Characterization | Advanced Materials | ORNL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHighand Retrievals from a New 183-GHzMAR Os2010Material Safety Electron

  12. Critical Materials Institute

    SciTech Connect (OSTI)

    Alex King

    2013-01-09T23:59:59.000Z

    Ames Laboratory Director Alex King talks about the goals of the Critical Materials Institute in diversifying the supply of critical materials, developing substitute materials, developing tools and techniques for recycling critical materials, and forecasting materials needs to avoid future shortages.

  13. Critical Materials Institute

    ScienceCinema (OSTI)

    Alex King

    2013-06-05T23:59:59.000Z

    Ames Laboratory Director Alex King talks about the goals of the Critical Materials Institute in diversifying the supply of critical materials, developing substitute materials, developing tools and techniques for recycling critical materials, and forecasting materials needs to avoid future shortages.

  14. Superhydrophobic Materials Technology-PVC Bonding Techniques

    SciTech Connect (OSTI)

    Hunter, Scott R. [Oak Ridge National Laboratory; Efird, Marty [VeloxFlow, LLC

    2013-05-03T23:59:59.000Z

    The purpose of the technology maturation project was to develop an enhanced application technique for applying diatomaceous earth with pinned polysiloxane oil to PVC pipes and materials. The oil infiltration technique is applied as a spray of diluted oil in a solvent onto the superhydrophobic diatomaceous earth substrate. This makes the surface take on the following characteristics: wet?cleanable anti?biofouling waterproof anti?corrosion. The project involved obtaining input and supplies from VeloxFlow and the development of successful techniques that would quickly result in a commercial license agreement with VeloxFlow and other companies that use PVC materials in a variety of other fields of use.

  15. Nuclear inputs of key iron isotopes for core-collapse modeling and simulation

    E-Print Network [OSTI]

    Jameel-Un Nabi; Abdel Nasser Tawfik

    2014-08-20T23:59:59.000Z

    From the modeling and simulation results of presupernova evolution of massive stars, it was found that isotopes of iron, $^{54,55,56}$Fe, play a significant role inside the stellar cores, primarily decreasing the electron-to-baryon ratio ($Y_{e}$) mainly via electron capture processes thereby reducing the pressure support. The neutrinos produced, as a result of these capture processes, are transparent to the stellar matter and assist in cooling the core thereby reducing the entropy. The structure of the presupernova star is altered both by the changes in $Y_{e}$ and the entropy of the core material. Here we present the microscopic calculation of Gamow-Teller strength distributions for isotopes of iron. The calculation is also compared with other theoretical models and experimental data. Presented also are stellar electron capture rates and associated neutrino cooling rates, due to isotopes of iron, in a form suitable for simulation and modeling codes. It is hoped that the nuclear inputs presented here should assist core-collapse simulators in the process of fine-tuning of the $Y_{e}$ parameter during various phases of presupernova evolution of massive stars. A reliable and accurate time evolution of this parameter is a possible key to generate a successful explosion in modeling of core-collapse supernovae.

  16. HAZARDOUS MATERIALS INCIDENTS What are hazardous materials?

    E-Print Network [OSTI]

    Fernandez, Eduardo

    HAZARDOUS MATERIALS INCIDENTS What are hazardous materials? Hazardous materials are chemicals, accidentally spilled, or released. In addition to laboratory chemicals, hazardous materials may include common not involve highly toxic or noxious hazardous materials, a fire, or an injury requiring medical attention

  17. HAZARDOUS MATERIALS INCIDENTS What are hazardous materials?

    E-Print Network [OSTI]

    Fernandez, Eduardo

    HAZARDOUS MATERIALS INCIDENTS What are hazardous materials? Hazardous materials are chemicals I do if there is a small spill in the area and personnel trained in Hazardous Material clean up, or there is a small spill where personnel trained in Hazardous Material clean up or an appropriate spill kit

  18. HAZARDOUS MATERIALS INCIDENTS What are hazardous materials?

    E-Print Network [OSTI]

    Fernandez, Eduardo

    HAZARDOUS MATERIALS INCIDENTS What are hazardous materials? Hazardous materials are chemicals I do if there is a small spill in the area and personnel trained in Hazardous Material clean up spill where personnel trained in Hazardous Material clean up or an appropriate spill kit

  19. HAZARDOUS MATERIALS INCIDENTS What are hazardous materials?

    E-Print Network [OSTI]

    Fernandez, Eduardo

    HAZARDOUS MATERIALS INCIDENTS What are hazardous materials? Hazardous materials are chemicals I do if there is a small spill in the area and personnel trained in Hazardous Material clean up personnel trained in Hazardous Material clean up or an appropriate spill kit is not available? Call 561

  20. Development of a generic computerized nuclear material accountability system

    SciTech Connect (OSTI)

    Cornell, M.D.; O'Leary, J.M.; McCutcheon, S.H.

    1987-01-01T23:59:59.000Z

    A computerized nuclear material accountability system (NucMAS) has been developed jointly by DuPont at Savannah River Plant (SRP) and Los Alamos National Laboratory (LANL). The SRP is faced with the goal of improving the accuracy and timeliness of nuclear material accountability. Limited manpower, funding, and time led to the decision to develop a single, generic, process-independent computer system for use throughout SRP's separations facilities, rather than traditional process-specific accountability computer systems. The NucMAS system is currently being installed in each of the material balance areas (MBAs) within SRP's separations facilities. It services the basic need for management of nuclear material inventory data to support timely, accurate, and consistent accountability reporting. Data input for NucMAS can come from any combination of manual entries and automated input, such as distributed control systems, laboratory computers, and vault surveillance systems. The system can be operated as a traditional, after-the-fact accountability system or in a near-real-time mode in situations where more timely data input is available and material control functions are desired. The granularity at which the accounting is performed is set by the MBA custodian and the level of detail at which input information is available.

  1. Data error detection and device controller failure detection in an input/output system

    SciTech Connect (OSTI)

    Katzman, J.A.; Bartlett, J.F.; Bixler, R.M.; Davidow, W.H.; Despotakis, J.A.; Graziano, P.J.; Green, M.D.; Greig, D.A.; Hayashi, S.J.; Mackie, D.R.

    1987-06-09T23:59:59.000Z

    This patent describes an input/output system for a multiprocessor system of the kind in which separate processor modules are interconnected for parallel processing, each of the processor modules having a central processing unit and a memory, at least some of the processor modules having an input/output channel, the input/output system comprising, at least one device controller for controlling the transfer of data between multiple different ones of the processor modules and a peripheral device.

  2. Water Power Calculator Temperature and Analog Input/Output Module Ambient Temperature Testing

    SciTech Connect (OSTI)

    Mark D. McKay

    2011-02-01T23:59:59.000Z

    Water Power Calculator Temperature and Analog input/output Module Ambient Temperature Testing A series of three ambient temperature tests were conducted for the Water Power Calculator development using the INL Calibration Laboratorys Tenney Environmental Chamber. The ambient temperature test results demonstrate that the Moore Industries Temperature Input Modules, Analog Input Module and Analog Output Module, ambient temperature response meet or exceed the manufactures specifications

  3. The SCALE Verified, Archived Library of Inputs and Data - VALID

    SciTech Connect (OSTI)

    Marshall, William BJ J [ORNL] [ORNL; Rearden, Bradley T [ORNL] [ORNL

    2013-01-01T23:59:59.000Z

    The Verified, Archived Library of Inputs and Data (VALID) at ORNL contains high quality, independently reviewed models and results that improve confidence in analysis. VALID is developed and maintained according to a procedure of the SCALE quality assurance (QA) plan. This paper reviews the origins of the procedure and its intended purpose, the philosophy of the procedure, some highlights of its implementation, and the future of the procedure and associated VALID library. The original focus of the procedure was the generation of high-quality models that could be archived at ORNL and applied to many studies. The review process associated with model generation minimized the chances of errors in these archived models. Subsequently, the scope of the library and procedure was expanded to provide high quality, reviewed sensitivity data files for deployment through the International Handbook of Evaluated Criticality Safety Benchmark Experiments (IHECSBE). Sensitivity data files for approximately 400 such models are currently available. The VALID procedure and library continue fulfilling these multiple roles. The VALID procedure is based on the quality assurance principles of ISO 9001 and nuclear safety analysis. Some of these key concepts include: independent generation and review of information, generation and review by qualified individuals, use of appropriate references for design data and documentation, and retrievability of the models, results, and documentation associated with entries in the library. Some highlights of the detailed procedure are discussed to provide background on its implementation and to indicate limitations of data extracted from VALID for use by the broader community. Specifically, external users of data generated within VALID must take responsibility for ensuring that the files are used within the QA framework of their organization and that use is appropriate. The future plans for the VALID library include expansion to include additional experiments from the IHECSBE, to include experiments from areas beyond criticality safety, such as reactor physics and shielding, and to include application models. In the future, external SCALE users may also obtain qualification under the VALID procedure and be involved in expanding the library. The VALID library provides a pathway for the criticality safety community to leverage modeling and analysis expertise at ORNL.

  4. Center for Coal-Derived Low Energy Materials for Sustainable Construction

    SciTech Connect (OSTI)

    Jewell, Robert; Robl, Tom; Rathbone, Robert

    2012-06-30T23:59:59.000Z

    The overarching goal of this project was to create a sustained center to support the continued development of new products and industries that manufacture construction materials from coal combustion by-products or CCBs (e.g., cements, grouts, wallboard, masonry block, fillers, roofing materials, etc). Specific objectives includes the development of a research kiln and associated system and the formulation and production of high performance low-energy, low-CO2 emitting calcium sulfoaluminate (CAS) cement that utilize coal combustion byproducts as raw materials.

  5. Preliminary materials assessment for the Satellite Power System (SPS)

    SciTech Connect (OSTI)

    Teeter, R.R.; Jamieson, W.M.

    1980-01-01T23:59:59.000Z

    Presently, there are two SPS reference design concepts (one using silicon solar cells; the other using gallium arsenide solar cells). A materials assessment of both systems was performed based on the materials lists set forth in the DOE/NASA SPS Reference System Report: Concept Development and Evaluation Program. This listing identified 22 materials (plus miscellaneous and organics) used in the SPS. Tracing the production processes for these 22 materials, a total demand for over 20 different bulk materials (copper, silicon, sulfuric acid, etc.) and nealy 30 raw materials (copper ore, sand, sulfur ore, etc.) was revealed. Assessment of these SPS material requirements produced a number of potential material supply problems. The more serious problems are those associated with the solar cell materials (gallium, gallium arsenide, sapphire, and solar grade silicon), and the graphite fiber required for the satellite structure and space construction facilities. In general, the gallium arsenide SPS option exhibits more serious problems than the silicon option, possibly because gallium arsenide technology is not as well developed as that for silicon. Results are presented and discussed in detail. (WHK)

  6. SRTC input to DOE-HQ R and D database for FY99

    SciTech Connect (OSTI)

    Chandler, L.R. Jr.

    2000-01-05T23:59:59.000Z

    This is a database of the Savannah River Site input to the DOE Research and Development database. The report contains approximately 50 project abstracts.

  7. V-112: Microsoft SharePoint Input Validation Flaws Permit Cross...

    Broader source: Energy.gov (indexed) [DOE]

    update addresses the vulnerabilities correcting the way that Microsoft SharePoint Server validates URLs and user input. IMPACT: A remote user can cause denial of service...

  8. PREDICTING THE TIME RESPONSE OF A BUILDING UNDER HEAT INPUT CONDITIONS FOR ACTIVE SOLAR HEATING SYSTEMS

    E-Print Network [OSTI]

    Warren, Mashuri L.

    2013-01-01T23:59:59.000Z

    Solar Energy Systems for Heating and Cooling. May, 1978. (Washington:Hemisphere heating, Publishing Corp. , 1978),INPUT CONDITIONS FOR ACTIVE SOLAR HEATING SYSTEMS Mashuri L.

  9. Approaches used for Clearance of Lands from Nuclear Facilities among Several Countries: Evaluation for Regulatory Input

    Broader source: Energy.gov [DOE]

    The study entitled, Approaches used for Clearance of Lands from Nuclear Facilities among Several Countries: Evaluation for Regulatory Input, focuses on the issue of showing compliance with given...

  10. [Composite analysis E-area vaults and saltstone disposal facilities]. PORFLOW and FACT input files

    SciTech Connect (OSTI)

    Cook, J.R.

    1997-09-01T23:59:59.000Z

    This diskette contains the PORFLOW and FACT input files described in Appendix B of the accompanying report `Composite Analysis E-Area Vaults and Saltstone Disposal Facilities`.

  11. Production of Materials with Superior Properties Utilizing High Magnetic

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible forPortsmouth/Paducah47,193.70 Hg Mercury 35 BrProcurementRaw Materials - EnergyField -

  12. MATERIALS MANAGEMENT MATERIALS MANAGEMENT -INVENTORY CONTROL

    E-Print Network [OSTI]

    Oliver, Douglas L.

    MATERIALS MANAGEMENT MATERIALS MANAGEMENT - INVENTORY CONTROL Record of Property Transferred from ______ ___________________________________ 2. DEAN (If Applies) ______ ___________________________________ 5. UNIVERSITY DIRECTOR OF MATERIALS MANAGEMENT ______ ___________________________________ 3. HOSPITAL DIRECTOR (If Applies) ______ IF YOU NEED

  13. Gas storage materials, including hydrogen storage materials

    DOE Patents [OSTI]

    Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

    2014-11-25T23:59:59.000Z

    A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material, such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

  14. Gas storage materials, including hydrogen storage materials

    DOE Patents [OSTI]

    Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

    2013-02-19T23:59:59.000Z

    A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

  15. Functional Materials for Energy | Advanced Materials | ORNL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Storage Fuel Cells Thermoelectrics Separations Materials Catalysis Sensor Materials Polymers and Composites Carbon Fiber Related Research Chemistry and Physics at...

  16. Materials Project: A Materials Genome Approach

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Ceder, Gerbrand (MIT); Persson, Kristin (LBNL)

    Technological innovation - faster computers, more efficient solar cells, more compact energy storage - is often enabled by materials advances. Yet, it takes an average of 18 years to move new materials discoveries from lab to market. This is largely because materials designers operate with very little information and must painstakingly tweak new materials in the lab. Computational materials science is now powerful enough that it can predict many properties of materials before those materials are ever synthesized in the lab. By scaling materials computations over supercomputing clusters, this project has computed some properties of over 80,000 materials and screened 25,000 of these for Li-ion batteries. The computations predicted several new battery materials which were made and tested in the lab and are now being patented. By computing properties of all known materials, the Materials Project aims to remove guesswork from materials design in a variety of applications. Experimental research can be targeted to the most promising compounds from computational data sets. Researchers will be able to data-mine scientific trends in materials properties. By providing materials researchers with the information they need to design better, the Materials Project aims to accelerate innovation in materials research.[copied from http://materialsproject.org/about] You will be asked to register to be granted free, full access.

  17. FLEX AND PINCH: A CASE STUDY OF WHOLE HAND INPUT DESIGN FOR VIRTUAL ENVIRONMENT INTERACTION

    E-Print Network [OSTI]

    Pattanaik, Sumanta N.

    FLEX AND PINCH: A CASE STUDY OF WHOLE HAND INPUT DESIGN FOR VIRTUAL ENVIRONMENT INTERACTION JOSEPH J. LAVIOLA JR. and ROBERT C. ZELEZNIK Brown University Site of the NSF Science and Technology Center. In this paper, we describe our Pinch Glove like input device which is used as a tool to augment bend

  18. Noninvasive high-resolution detection of the arterial and venous input function through a PET Wrist

    E-Print Network [OSTI]

    Noninvasive high-resolution detection of the arterial and venous input function through a PET Wrist using planar coincidence images. I. INTRODUCTION Quantitative Positron Emission Tomography (PET) often determine the input function. These techniques include external monitors and PET scanners that measure

  19. Improved Imaged-derived Input Function for Study of Human Brain FDG-PET

    E-Print Network [OSTI]

    Renaut, Rosemary

    Improved Imaged-derived Input Function for Study of Human Brain FDG-PET Hongbin Guo, Rosemary tomography (PET) studies. Two time windows can be recognized in the time activity curve measured from the compartmental model for FDG PET [5]. Index Terms Quantification of FDG PET, Automated Image-derived input

  20. Evaluating an Alternative Model for the Input Function in FDG-PET Studies 1

    E-Print Network [OSTI]

    Renaut, Rosemary

    Evaluating an Alternative Model for the Input Function in FDG-PET Studies 1 Hongbin Guo 2 Rosemary-D-glucose flu- oro (FDG) positron emission tomography (PET) brain studies with bolus injection is presented-derived expressions. The new model provides an effective means to recover the input function in FDG-PET studies

  1. Experimental Results on Multiple-Input Single-Output (MISO) Time Reversal for UWB

    E-Print Network [OSTI]

    Qiu, Robert Caiming

    Experimental Results on Multiple-Input Single-Output (MISO) Time Reversal for UWB Systems with multiple-input single- output (MISO) antennas over ultra-wideband (UWB) channels. In particular, temporal and spatial focusing as well as array gain are studied based on a (4 1) MISO scheme in an office environment

  2. Design of penalty functions for optimal control of linear dynamical systems under state and input constraints

    E-Print Network [OSTI]

    Design of penalty functions for optimal control of linear dynamical systems under state and input of solving a constrained optimal control for a general single-input single output linear time varying system dimensional (functional optimization) case. The main novelty is that both the bounds on the control variable

  3. Asymptotic Controllability and Input-to-State Stabilization: The Effect of Actuator Errors

    E-Print Network [OSTI]

    Sontag, Eduardo

    a new feedback design that makes globally asymptotically controllable systems input-to-state stable of input-to-state stable (ISS) systems forms the basis for much modern nonlinear feedback design-to-state stabi- lizability of nonlinear finite-dimensional continuous-time control systems. We focus on some

  4. Kalman filtering with unknown inputs via optimal state estimation of singular systems

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    1 Kalman filtering with unknown inputs via optimal state estimation of singular systems M. DAROUACH de Lorraine, 54400 COSNES ET ROMAIN, FRANCE A new method for designing a Kalman filter for linear the Kalman filter, it is generally assumed that all system parameters, noise covariances, and inputs

  5. INPUT VARIABLE SELECTION USING INDEPENDENT COMPONENT ANALYSIS AND HIGHER ORDER STATISTICS

    E-Print Network [OSTI]

    Vialatte, Franois

    that the method is capable of giving reliable performance with dependent inputs to non- linear models. 1-test. Given a linear regression model (1) where is an parameter vector and is an input regression vector. Assume we have a generating system given by (2) where and is some static non- linear function, possibly

  6. A coupled isotope tracer method to characterize input water to lakes

    E-Print Network [OSTI]

    Edwards, Thomas W.D.

    of input waters after accounting for the effects of secondary evaporative isotopic enrichment. As shownA coupled isotope tracer method to characterize input water to lakes Yi Yi a,*, Bronwyn E. Brock in revised form 7 November 2007; accepted 9 November 2007 KEYWORDS Water isotope tracers; Isotope hydrology

  7. Magnetized Target Fusion: Input to the 35-yr Fusion Long-Range Electric Plan

    E-Print Network [OSTI]

    controlled thermonuclear fusion in the laboratory -- Intermediate between MFE and IFE Presently only fundedMagnetized Target Fusion: Input to the 35-yr Fusion Long-Range Electric Plan G. A. Wurden Fusion Energy Program Office Los Alamos National Laboratory Jan. 14, 2003 #12;Magnetized Target Fusion: Input

  8. A Current-based Method for Short Circuit Power Calculation under Noisy Input Waveforms*

    E-Print Network [OSTI]

    Pedram, Massoud

    A Current-based Method for Short Circuit Power Calculation under Noisy Input Waveforms* Hanif circuit energy dissipation of logic cells. The short circuit current is highly dependent on the input waveforms are then used to calculate the short circuit current, and hence, short circuit energy dissipation

  9. 2008 Residential Building Efficiency Standards 1 Efficiency Ratings and Performance Modeling Inputs

    E-Print Network [OSTI]

    Inputs for the Daiken AC (Americas), Inc. Altherma Air-to-Water Source Heat Pump System The Building-to-Water Source Heat Pump can provide space heating, space cooling and domestic water heating functions Required Compliance Software Inputs-- The Altherma Air-to-Water Source Heat Pump system is an electric heat

  10. LETTER Communicated by Emilio Salinas Higher-Order Statistics of Input Ensembles and the Response

    E-Print Network [OSTI]

    LETTER Communicated by Emilio Salinas Higher-Order Statistics of Input Ensembles and the Response (Steinmetz et al., 2000; Salinas & Sejnowski, 2001). The effect of correlated synaptic input on the neuronal; Salinas & Sejnowski, 2000; Svirskis & Rinzel, 2000; Feng & Zhang, 2001; Stroeve & Gielen, 2001

  11. MiTV: Multiple-Implementation Testing of User-Input Validators for Web Applications

    E-Print Network [OSTI]

    Xie, Tao

    MiTV: Multiple-Implementation Testing of User-Input Validators for Web Applications Kunal Taneja1 Nuo Li1 Madhuri R. Marri1 Tao Xie1 Nikolai Tillmann2 1 Department of Computer Science, North Carolina,txie}@ncsu.edu, 2nikolait@microsoft.com ABSTRACT User-input validators play an essential role in guarding a web

  12. Quality assurance of solar thermal systems with the ISFH-Input/Output-Procedure

    E-Print Network [OSTI]

    Quality assurance of solar thermal systems with the ISFH- Input/Output-Procedure Peter Paerisch different solar systems. The simulation model was validated with measured data. The deviation between meas * Tel. +49 (0)5151-999503, Fax: +49 (0)5151-999500, Email: paerisch@isfh.de Abstract Input/Output

  13. MATERIALS MANAGEMENT MATERIALS MANAGEMENT -INVENTORY CONTROL

    E-Print Network [OSTI]

    Oliver, Douglas L.

    MATERIALS MANAGEMENT MATERIALS MANAGEMENT - INVENTORY CONTROL NOTICE OF DESIGNATED DEPARTMENTAL OF MATERIALS MANAGEMENT ______ FURTHER INSTRUCTIONS 1. Include a copy of any relevant documents. 2. Item MATERIALS COORDINATOR IC-8 Mail, Fax or PDF the entire package to: MC 2010 Fax: 679-4240 REFERENCE # DMC

  14. Review of input stages used in front end electronics for particle detectors

    E-Print Network [OSTI]

    Kaplon, J

    2015-01-01T23:59:59.000Z

    In this paper we present noise analysis of the input stages most commonly used in front end electronics for particle detectors. Analysis shows the calculation of the input referenced noise related to the active devices. It identifies the type, parallel or series, of the equivalent noise sources related to the input transistors, which is the important input for the further choice of the signal processing method. Moreover we calculate the input impedance of amplifiers employed in applications where the particle detector is connected to readout electronics by means of transmission line. We present schematics, small signal models,a complete set of equations, and results of the major steps of calculations for all discussed circuits.

  15. DREDGED MATERIAL EVALUATION AND

    E-Print Network [OSTI]

    DREDGED MATERIAL EVALUATION AND DISPOSAL PROCEDURES (USERS' MANUAL) Dredged Material Management 2009) Prepared by: Dredged Material Management Office US Army Corps of Engineers Seattle District #12........................................................................................2-1 2.2 The Dredged Material Evaluation Process

  16. Energy Materials Coordinating Committee (EMaCC). Annual technical report, Fiscal Year 2001

    SciTech Connect (OSTI)

    none,

    2002-08-01T23:59:59.000Z

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations.

  17. Method for forming materials

    DOE Patents [OSTI]

    Tolle, Charles R. (Idaho Falls, ID); Clark, Denis E. (Idaho Falls, ID); Smartt, Herschel B. (Idaho Falls, ID); Miller, Karen S. (Idaho Falls, ID)

    2009-10-06T23:59:59.000Z

    A material-forming tool and a method for forming a material are described including a shank portion; a shoulder portion that releasably engages the shank portion; a pin that releasably engages the shoulder portion, wherein the pin defines a passageway; and a source of a material coupled in material flowing relation relative to the pin and wherein the material-forming tool is utilized in methodology that includes providing a first material; providing a second material, and placing the second material into contact with the first material; and locally plastically deforming the first material with the material-forming tool so as mix the first material and second material together to form a resulting material having characteristics different from the respective first and second materials.

  18. Abstract--This study proposes an easy-to-use methodology to estimate the materials embodied energy and manufacturing

    E-Print Network [OSTI]

    Gutowski, Timothy

    to the manufacturing energy requirements to process the materials. The database contains a total of 74 entriesAbstract-- This study proposes an easy-to-use methodology to estimate the materials embodied energy and manufacturing energy for a product. The tool requires as input the product's Bill of Materials and the knowledge

  19. All-optical routing of single photons with multiple input and output ports by interferences

    E-Print Network [OSTI]

    Wei-Bin Yan; Bao Liu; Ling Zhou; Heng Fan

    2014-09-23T23:59:59.000Z

    We propose a waveguide-cavity coupled system to achieve the routing of photons by the phases of other photons. Our router has four input ports and four output ports. The transport of the coherent-state photons injected through any input port can be controlled by the phases of the coherent-state photons injected through other input ports. This control can be achieved when the mean numbers of the routed and control photons are small enough and require no additional control fields. Therefore, the all-optical routing of photons can be achieved at the single-photon level.

  20. Input to the PRAST computer code used in the SRS probabilistic risk assessment

    SciTech Connect (OSTI)

    Kearnaghan, D.P.

    1992-10-15T23:59:59.000Z

    The PRAST (Production Reactor Algorithm for Source Terms) computer code was developed by Westinghouse Savannah River Company and Science Application International Corporation for the quantification of source terms for the SRS Savannah River Site (SRS) Reactor Probabilistic Risk Assessment. PRAST requires as input a set of release fractions, decontamination factors, transfer fractions and source term characteristics that accurately reflect the conditions that are evaluated by PRAST. This document links the analyses which form the basis for the PRAST input parameters. In addition, it gives the distribution of the input parameters that are uncertain and considered to be important to the evaluation of the source terms to the environment.

  1. Transporting particulate material

    DOE Patents [OSTI]

    Aldred, Derek Leslie (North Hollywood, CA); Rader, Jeffrey A. (North Hollywood, CA); Saunders, Timothy W. (North Hollywood, CA)

    2011-08-30T23:59:59.000Z

    A material transporting system comprises a material transporting apparatus (100) including a material transporting apparatus hopper structure (200, 202), which comprises at least one rotary transporting apparatus; a stationary hub structure (900) constraining and assisting the at least one rotary transporting apparatus; an outlet duct configuration (700) configured to permit material to exit therefrom and comprising at least one diverging portion (702, 702'); an outlet abutment configuration (800) configured to direct material to the outlet duct configuration; an outlet valve assembly from the material transporting system venting the material transporting system; and a moving wall configuration in the material transporting apparatus capable of assisting the material transporting apparatus in transporting material in the material transporting system. Material can be moved from the material transporting apparatus hopper structure to the outlet duct configuration through the at least one rotary transporting apparatus, the outlet abutment configuration, and the outlet valve assembly.

  2. Lessons Learned in Optimizing Workers' and Worker Representatives' Input to Work Planning and Control

    Broader source: Energy.gov [DOE]

    Slide Presentation by Tom McQuiston, Dr. P.H., United Steelworkers - Tony Mazzocchi Center for Health, Safety and Environmental Education. Lessons Learned in Optimizing Workers and Worker Representatives Input in Work Planning and Control.

  3. Use of Building Automation System Trend Data for Inputs Generation in Bottom-Up Simulation Calibration

    E-Print Network [OSTI]

    Zibin, N. F.; Zmeureanu, R. G.; Love, J. A.

    2013-01-01T23:59:59.000Z

    for analysis and use in simulation is very large. This paper explores automating the process of generating inputs from Building Automation System (BAS) trend data for use in building simulation software. A proof-of-concept prototype called the Automatic...

  4. Assigning intonation elements and prosodic phrasing for English speech synthesis from high level linguistic input

    E-Print Network [OSTI]

    Black, Alan W; Taylor, Paul A

    This paper describes a method for generating intonation events and prosodic phrasing from a high level linguistic description. Specifically, the input consists of information normally available from linguistic processing: ...

  5. T-602: BlackBerry Enterprise Server Input Validation Flaw in...

    Broader source: Energy.gov (indexed) [DOE]

    BlackBerry Enterprise Server Input Validation Flaw in BlackBerry Web Desktop Manager Permits Cross-Site Scripting Attacks PLATFORM: BlackBerry Enterprise Server Express versions...

  6. METAMODELS AS INPUT OF AN OPTIMIZATION ALGORITHM FOR SOLVING AN INVERSE EDDY CURRENT TESTING PROBLEM

    E-Print Network [OSTI]

    Boyer, Edmond

    METAMODELS AS INPUT OF AN OPTIMIZATION ALGORITHM FOR SOLVING AN INVERSE EDDY CURRENT TESTING-Curie, 91192 Gif-sur-Yvette, France Abstract A new mean of solution of eddy current testing (ECT) inverse

  7. Three papers on input-ouput [sic] energy and environmental accounting

    E-Print Network [OSTI]

    Huang, Sonya (Sonya Y.)

    2013-01-01T23:59:59.000Z

    The input-output model, a framework for national accounting and economic modeling, has been popular among regional economists for studying energy and emissions due to its focus on interindustry linkages. In a series of ...

  8. A study of the effects of natural fertility, weather and productive inputs in Chinese agriculture

    E-Print Network [OSTI]

    Eckaus, Richard S.; Tso, Katherine Kit-Yan.

    This paper presents an investigation of the relations in China between farm output, the natural fertility of agricultural land, and the use of anthropogenic farm inputs. The methodology is presented as a potential increment ...

  9. The Effect of Changing Input and Product Prices on the Demand for Irrigation Water in Texas

    E-Print Network [OSTI]

    Lacewell, R. D.; Condra, G. D.

    uncertainties which often have not disturbed the policy-maker in evaluating alternatives. Product prices have risen and fallen at an unprecedented rate while input prices have steadily risen at rates which preclude realistic budgeting. For example, during...

  10. Eutrophication: impacts of excess nutrient inputs on freshwater, marine, and terrestrial ecosystems

    E-Print Network [OSTI]

    Minnesota, University of

    Eutrophication: impacts of excess nutrient inputs on freshwater, marine, and terrestrial ecosystems enrichment, or eutrophication, can lead to highly undesirable changes in ecosystem structure and function eutrophication in freshwater, marine, and terrestrial ecosystems. We present two brief case studies (one

  11. Identifying Steam Opportunity "Impact" Inputs for the Steam System Assessment Tool (SSAT)

    E-Print Network [OSTI]

    Harrell, G.; Jendrucko, R.; Wright, A.

    2004-01-01T23:59:59.000Z

    IDENTIFYING STEAM OPPORTUNITY "IMPACT" INPUTS FOR THE STEAM SYSTEM ASSESSMENT TOOL (SSAT) Dr. Greg Harrell, University of Tennessee/Knoxville Dr. Richard Jendrucko, University of Tennessee/Knoxville Dr. Anthony Wright, Oak Ridge National...

  12. OBSERVER DESIGN FOR NONLINEAR SYSTEMS BY USING INPUT-TO-STATE STABILITY

    E-Print Network [OSTI]

    Sontag, Eduardo

    OBSERVER DESIGN FOR NONLINEAR SYSTEMS BY USING INPUT-TO-STATE STABILITY A. Alessandri Abstract by solving LMI problems [18]. A. Alessandri is with the Institute of Intelligent Systems for Automation

  13. On the Patterns of Wind-Power Input to the Ocean Circulation

    E-Print Network [OSTI]

    Roquet, Fabien

    Pathways of wind-power input into the ocean general circulation are analyzed using Ekman theory. Direct rates of wind work can be calculated through the wind stress acting on the surface geostrophic flow. However, because ...

  14. Development of MELCOR Input Techniques for High Temperature Gas-Cooled Reactor Analysis

    E-Print Network [OSTI]

    Corson, James

    2011-08-08T23:59:59.000Z

    and other HTGRs. In the present study, new input techniques have been developed for MELCOR HTGR analysis. These new techniques include methods for modeling radiation heat transfer between solid surfaces in an HTGR, calculating fuel and cladding geometric...

  15. Shelf-derived iron inputs drive biological productivity in the southern Drake Passage

    E-Print Network [OSTI]

    as large as inputs from mineral dust. Sediment resuspension events [Luther and Wu, 1997; Johnson et al al., 2004] lead to higher concentrations in coastal and shelf waters. It appears that in the Southern

  16. An Input Function Estimation Method for FDG-PET Human Brain Studies 1

    E-Print Network [OSTI]

    Renaut, Rosemary

    An Input Function Estimation Method for FDG-PET Human Brain Studies 1 Hongbin Guo ,2 Rosemary 85287-1804, Tel: 480-965-8002, Fax: 480-965-4160 Email addresses: hb guo@asu.edu (Hongbin Guo), renaut

  17. Input-Output as a Method of Evaluahon of the Economic Impact of Water Resources Development

    E-Print Network [OSTI]

    Canion, R. L.; Trock, W. L.

    In this report the results of a study of the use of input-output analysis to evaluate the economic impact of water resources development are presented. Blackburn Crossing reservoir on the Upper Neches river was the subject development...

  18. Code design for multiple-input multiple-output broadcast channels

    E-Print Network [OSTI]

    Uppal, Momin Ayub

    2009-06-02T23:59:59.000Z

    Recent information theoretical results indicate that dirty-paper coding (DPC) achieves the entire capacity region of the Gaussian multiple-input multiple-output (MIMO) broadcast channel (BC). This thesis presents practical code designs for Gaussian...

  19. Materials Science & Engineering

    E-Print Network [OSTI]

    Reisslein, Martin

    Materials Science & Engineering The development of new high-performance materials for energy Research in Niskayuna, NY. He received his BS and PhD in Materials Science and Engineering at MIT. For 22 and composition of materials at higher spatial resolution, with greater efficiency, and on real materials

  20. Life-cycle assessment (LCA) methodology applied to energetic materials

    SciTech Connect (OSTI)

    Reardon, P.T.

    1995-03-01T23:59:59.000Z

    The objective of the Clean Agile Manufacturing of Propellants, Explosives, and pyrotechnics (CAMPEP) program is to develop and demonstrate the feasibility of using modeling, alternate materials and processing technology to reduce PEO life-cycle pollution by up to 90%. Traditional analyses of factory pollution treat the manufacturing facility as the singular pollution source. The life cycle of a product really begins with raw material acquisition and includes all activities through ultimate disposal. The life cycle thus includes other facilities besides the principal manufacturing facility. The pollution generated during the product life cycle is then integrated over the total product lifetime, or represents a ``cradle to grave`` accounting philosophy. This paper addresses a methodology for producing a life-cycle inventory assessment.

  1. Concatenated codes for the multiple-input multiple-output quasi-static fading channel

    E-Print Network [OSTI]

    Gulati, Vivek

    2005-02-17T23:59:59.000Z

    CONCATENATED CODES FOR THE MULTIPLE-INPUT MULTIPLE-OUTPUT QUASI-STATIC FADING CHANNEL A Dissertation by VIVEK GULATI Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree... of DOCTOR OF PHILOSOPHY December 2004 Major Subject: Electrical Engineering CONCATENATED CODES FOR THE MULTIPLE-INPUT MULTIPLE-OUTPUT QUASI-STATIC FADING CHANNEL A Dissertation by VIVEK GULATI Submitted to Texas A&M University in partial fulfillment...

  2. Economic effect on agricultural production of alternative energy input prices: Texas High Plains

    E-Print Network [OSTI]

    Adams, Benjamin Michael

    1975-01-01T23:59:59.000Z

    ECONOMIC EFFECT ON AGRICULTURAL PRODUCTION OF ALTERNATIYE ENERGy INPUT PRICES: TEXAS HIGH PLAlNS A Thesis by BENJAMIN MICHAEL ADAMS Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirement... for the degree of MASTER OF SCIENCE December 1975 Major Subject: Agricultural Economics ECONOMIC EFFECT ON AGRICULTURAL PRODUCTION OF ALTERNATIVE ENERGY INPUT PRICES: TEXAS HIGH PLAINS A Thesis by BENJAMIN MICHAEL ADAMS Approved as to style and content...

  3. R. K. Heitschmidt, R. E. Short and E. E. Grings Ecosystems, sustainability, and animal agriculture

    E-Print Network [OSTI]

    Wang, Changlu

    aspects of ecosystems is presented. Energy output/cultural energy input ratios were then calculated for 11 was estimated by direct conversion of whole body mass of steers to caloric values. Cultural energy inputs were matter intakes. Cultural energy inputs in- cluded raw materials, manufacturing, distribution, maintenance

  4. High Temperature Materials Interim Data Qualification Report

    SciTech Connect (OSTI)

    Nancy Lybeck

    2010-08-01T23:59:59.000Z

    ABSTRACT Projects for the very high temperature reactor (VHTR) Technology Development Office provide data in support of Nuclear Regulatory Commission licensing of the VHTR. Fuel and materials to be used in the reactor are tested and characterized to quantify performance in high temperature and high fluence environments. The VHTR program has established the NGNP Data Management and Analysis System (NDMAS) to ensure that VHTR data are qualified for use, stored in a readily accessible electronic form, and analyzed to extract useful results. This document focuses on the first NDMAS objective. It describes the High Temperature Materials characterization data stream, the processing of these data within NDMAS, and reports the interim FY2010 qualification status of the data. Data qualification activities within NDMAS for specific types of data are determined by the data qualification category assigned by the data generator. The High Temperature Materials data are being collected under NQA-1 guidelines, and will be qualified data. For NQA-1 qualified data, the qualification activities include: (1) capture testing, to confirm that the data stored within NDMAS are identical to the raw data supplied, (2) accuracy testing to confirm that the data are an accurate representation of the system or object being measured, and (3) documenting that the data were collected under an NQA-1 or equivalent Quality Assurance program. Currently, data from two test series within the High Temperature Materials data stream have been entered into the NDMAS vault: 1. Tensile Tests for Sm (i.e., Allowable Stress) Confirmatory Testing 1,403,994 records have been inserted into the NDMAS database. Capture testing is in process. 2. Creep-Fatigue Testing to Support Determination of Creep-Fatigue Interaction Diagram 918,854 records have been processed and inserted into the NDMAS database. Capture testing is in process.

  5. Department of Materials Science &

    E-Print Network [OSTI]

    Acton, Scott

    Developing Leaders of Innovation Department of Materials Science & Engineering #12;At the University of Virginia, students in materials science, engineering physics and engineering science choose to tackle compelling issues in materials science and engineering or engineering science

  6. Nanostructured magnetic materials

    E-Print Network [OSTI]

    Chan, Keith T.

    2011-01-01T23:59:59.000Z

    Magnetism and Magnetic Materials Conference, Atlanta, GA (Nanostructured Magnetic Materials by Keith T. Chan Doctor ofinduced by a Si-based material occurs at a Si/Ni interface

  7. On the Variability of Wind Power Input to the Oceans with a Focus on the Subpolar North Atlantic

    E-Print Network [OSTI]

    Zhai, Xiaoming

    Variations in power input to the ocean using a recent global reanalysis extending back to 1871 show a strong trend in the net power input since then, a trend dominated by the Southern Ocean region. This trend is interpreted ...

  8. MATERIALS TRANSFER AGREEMENT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MTAXX-XXX 1 MATERIAL TRANSFER AGREEMENT for Manufacturing Demonstration Facility and Carbon Fiber Technology Facility In order for the RECIPIENT to obtain materials, the RECIPIENT...

  9. Materials at the Mesoscale

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Materials at the Mesoscale 1663 Los Alamos science and technology magazine Latest Issue:January 2015 All Issues submit Materials at the Mesoscale Los Alamos's bold proposal to...

  10. UNCLASSIFIED Institute for Materials ...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Institute for Materials Science Lecture Series Dr Roger D Doherty M.A. D. Phil., Fellow TMS Emeritus Professor of Materials Science and Engineering, Drexel University,...

  11. Transporting Hazardous Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Transporting Hazardous Materials The procedures given below apply to all materials that are considered to be hazardous by the U.S. Department of Transportation (DOT). Consult your...

  12. battery materials | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    battery materials battery materials Leads No leads are available at this time. Modeling Interfacial Glass-Water Reactions: Recent Advances and Current Limitations. Abstract: The...

  13. EMSL - Energy Materials & Processes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    energy Energy Materials and Processes focuses on the dynamic transformation mechanisms and physical and chemical properties at critical interfaces in catalysts and energy materials...

  14. Propulsion Materials Research Update

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    * Materials for Electric and Hybrid Drive Systems - Address materials issues impacting power electronics, motors, and other hybrid drive system components * Combustion System...

  15. Materials Technical Team Roadmap

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of these as mixed- material systems. Additionally, materials such as titanium, polycarbonate, acrylics, and metal matrix composites, and approaches to their use must be...

  16. The Influence of Isotopic Mass, Edge Magnetic Shear and Input Power on High Density ELMy H-modes in JET

    E-Print Network [OSTI]

    The Influence of Isotopic Mass, Edge Magnetic Shear and Input Power on High Density ELMy H-modes in JET

  17. Dual-Sampling-Rate Moving Horizon Control of a Class of Linear Systems with Input Saturation and

    E-Print Network [OSTI]

    Dual-Sampling-Rate Moving Horizon Control of a Class of Linear Systems with Input Saturation horizon control scheme for a class of linear, continuous-time plants with strict input saturation horizon control, robust, fast sampling, stability, linear sys- tems, input constraints 1 Introduction

  18. REVIEW OF SCIENTIFIC INSTRUMENTS 83, 033109 (2012) Thermal effects in the Input Optics of the Enhanced Laser Interferometer

    E-Print Network [OSTI]

    Tanner, David B.

    proportional to the GW strain and the input power. The Fabry-Perot cavi- ties in the Michelson arms and a powerREVIEW OF SCIENTIFIC INSTRUMENTS 83, 033109 (2012) Thermal effects in the Input Optics run of the LIGO interferometers. The Initial LIGO Input Optics experienced thermal side effects when

  19. Estimates of wind energy input to the Ekman layer in the Southern Ocean from surface drifter data

    E-Print Network [OSTI]

    Gille, Sarah T.

    Estimates of wind energy input to the Ekman layer in the Southern Ocean from surface drifter data March 2009; published 5 June 2009. [1] The energy input to the upper ocean Ekman layer is assessed velocities, with an adjustment to account for the vertical structure of the upper ocean. The energy input

  20. Materials Science & Engineering

    E-Print Network [OSTI]

    Materials Science & Engineering In this presentation the role of materials in power generation and the person responsible for the integration of science and resources in the Materials Science & Technology University in Mexico City and a Ph.D. in Materials Engineering from Rensselaer Polytechnic Institute, Troy NY

  1. Coated ceramic breeder materials

    DOE Patents [OSTI]

    Tam, Shiu-Wing (Downers Grove, IL); Johnson, Carl E. (Elk Grove, IL)

    1987-01-01T23:59:59.000Z

    A breeder material for use in a breeder blanket of a nuclear reactor is disclosed. The breeder material comprises a core material of lithium containing ceramic particles which has been coated with a neutron multiplier such as Be or BeO, which coating has a higher thermal conductivity than the core material.

  2. HAZARDOUS MATERIALS EMERGENCY RESPONSE

    E-Print Network [OSTI]

    ANNEX Q HAZARDOUS MATERIALS EMERGENCY RESPONSE #12;ANNEX Q - HAZARDOUS MATERIALS EMERGENCY RESPONSE 03/10/2014 v.2.0 Page Q-1 PROMULGATION STATEMENT Annex Q: Hazardous Materials Emergency Response, and contents within, is a guide to how the University conducts a response specific to a hazardous materials

  3. UNDERGRADUATE Materials Science & Engineering

    E-Print Network [OSTI]

    Tipple, Brett

    UNDERGRADUATE HANDBOOK Materials Science & Engineering 2013 2014 #12;STUDYING FOR A MATERIALS SCIENCE AND ENGINEERING DEGREE Materials Science and Engineering inter-twines numerous disciplines that still gives the students the opportunity to study science while earning an engineering degree. Materials

  4. Materials Science & Engineering

    E-Print Network [OSTI]

    Simons, Jack

    Materials Science & Engineering The University of Utah 2014-15 Undergraduate Handbook #12;STUDYING FOR A MATERIALS SCIENCE AND ENGINEERING DEGREE Materials Science and Engineering inter-twines numerous disciplines that still gives the students the opportunity to study science while earning an engineering degree. Materials

  5. A Materials Facilities Initiative -

    E-Print Network [OSTI]

    A Materials Facilities Initiative - FMITS & MPEX D.L. Hillis and ORNL Team Fusion & Materials for Nuclear Systems Division July 10, 2014 #12;2 Materials Facilities Initiative JET ITER FNSF Fusion Reactor Challenges for materials: fluxes and fluence, temperatures 50 x divertor ion fluxes up to 100 x neutron

  6. University Materials Institute INTRODUCTION

    E-Print Network [OSTI]

    Escolano, Francisco

    University Materials Institute INTRODUCTION The University Materials Science Institute of Alicante the needed multidisciplinary character of the materials area. It is important to highlight the fact participate in the Materials Science PhD program which is imparted at the UA. Scientific research

  7. Dental Materials BIOMATERIALS

    E-Print Network [OSTI]

    Dental Materials BIOMATERIALS Our goal is to provide reference materials and clinically relevant measurement methods to facilitate a rational approach to dental materials design, thus enabling improvements in the clinical performance of dental materials. In particular, methods for determining long-term performance

  8. CRAD, Packaging and Transfer of Hazardous Materials and Materials...

    Office of Environmental Management (EM)

    CRAD, Packaging and Transfer of Hazardous Materials and Materials of National Security Interest Assessment Plan CRAD, Packaging and Transfer of Hazardous Materials and Materials of...

  9. Puncture detecting barrier materials

    DOE Patents [OSTI]

    Hermes, Robert E. (Los Alamos, NM); Ramsey, David R. (Bothel, WA); Stampfer, Joseph F. (Santa Fe, NM); Macdonald, John M. (Santa Fe, NM)

    1998-01-01T23:59:59.000Z

    A method and apparatus for continuous real-time monitoring of the integrity of protective barrier materials, particularly protective barriers against toxic, radioactive and biologically hazardous materials has been developed. Conductivity, resistivity or capacitance between conductive layers in the multilayer protective materials is measured by using leads connected to electrically conductive layers in the protective barrier material. The measured conductivity, resistivity or capacitance significantly changes upon a physical breach of the protective barrier material.

  10. Supporting Online Material Materials and Methods

    E-Print Network [OSTI]

    Wolfe, Cecily J.

    1 Supporting Online Material Materials and Methods (15) For all possible earthquake pairs. The parameters chosen for window length, filter bandpass, negative sidelobe identification, and cross-correlation threshold are appropriate for high-frequency earthquakes. In order to remove false positives or poor data

  11. SUPPORTING ONLINE MATERIAL Materials and Methods

    E-Print Network [OSTI]

    Newsome, William

    SUPPORTING ONLINE MATERIAL Materials and Methods Two adult male rhesus monkeys (Macaca mulatta with a head-holding device (S1), scleral search coil for monitoring eye position (S2) and a recording chamber monkeys remain actively engaged in experiments, so precise histological identification of recording sites

  12. Input-output Analysis of Quantum Finite-level Systems in Response to Single Photon States

    E-Print Network [OSTI]

    Yu Pan; Guofeng Zhang; Matthew R. James

    2015-01-01T23:59:59.000Z

    Single photon states, which carry quantum information and coherently interact with quantum systems, are vital to the realization of all-optical quantum networks and quantum memory. In this paper we derive the conditions that enable an exact analysis of the response of passive quantum finite-level systems under the weak driving of single photon input. We show that when a class of finite level systems is driven by single photon inputs, expressions for the output states may be derived exactly using linear systems transfer functions. This removes the need for physical approximations such as weak excitation limit in the analysis of quantum nonlinear systems under single photon driving. We apply this theory to the analysis of a single photon switch. The input-output relations are consistent with the existing results in the study of few photon transport through finite-level systems.

  13. Sensors & Materials | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sensors and Materials Argonne uses its materials and engineering expertise to develop, test, and deploy sensors and materials to detect nuclear and radiological materials, chemical...

  14. Lightweighting Materials | Clean Energy | ORNL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ORNL conducts lightweight materials research in several areas: materials development, properties and manufacturing, computational materials science, and multi-material enabling...

  15. Estimating production functions with damage control inputs: an application to Korean vegetable production

    E-Print Network [OSTI]

    Park, Pil Ja

    2002-01-01T23:59:59.000Z

    (1997) explore the implicanons of the Lichienberg and Zilberman model, particularly the assumption that damage abatement is independent of all other inputs. The general functional form proposed by Lichtenberg and Zilbennan is (2. 2) q = f[z, G(x... with damage abatement functions G(x, y) as the input were estimated, using the chosen model for the variance 3. 3. ) Esrimationoff (xyz) For f( ), a Cobb-Douglas, translog and quadratic were estimated. The respective model specifications are: (3. 6) f...

  16. Additivity and multiplicativity properties of some Gaussian channels for Gaussian inputs

    E-Print Network [OSTI]

    Tohya Hiroshima

    2006-02-13T23:59:59.000Z

    We prove multiplicativity of maximal output $p$ norm of classical noise channels and thermal noise channels of arbitrary modes for all $p>1$ under the assumption that the input signal states are Gaussian states. As a direct consequence, we also show the additivity of the minimal output entropy and that of the energy-constrained Holevo capacity for those Gaussian channels under Gaussian inputs. To the best of our knowledge, newly discovered majorization relation on symplectic eigenvalues, which is also of independent interest, plays a central role in the proof.

  17. Joining of dissimilar materials

    DOE Patents [OSTI]

    Tucker, Michael C; Lau, Grace Y; Jacobson, Craig P

    2012-10-16T23:59:59.000Z

    A method of joining dissimilar materials having different ductility, involves two principal steps: Decoration of the more ductile material's surface with particles of a less ductile material to produce a composite; and, sinter-bonding the composite produced to a joining member of a less ductile material. The joining method is suitable for joining dissimilar materials that are chemically inert towards each other (e.g., metal and ceramic), while resulting in a strong bond with a sharp interface between the two materials. The joining materials may differ greatly in form or particle size. The method is applicable to various types of materials including ceramic, metal, glass, glass-ceramic, polymer, cermet, semiconductor, etc., and the materials can be in various geometrical forms, such as powders, fibers, or bulk bodies (foil, wire, plate, etc.). Composites and devices with a decorated/sintered interface are also provided.

  18. Energy Materials Coordinating Committee (EMaCC) Fiscal Year 1999 annual technical report

    SciTech Connect (OSTI)

    None

    2000-10-31T23:59:59.000Z

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department`s materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations. This report summarizes EMaCC activities for FY 1999 and describes the materials research programs of various offices and divisions within the Department.

  19. Materials for breeding blankets

    SciTech Connect (OSTI)

    Mattas, R.F.; Billone, M.C.

    1995-09-01T23:59:59.000Z

    There are several candidate concepts for tritium breeding blankets that make use of a number of special materials. These materials can be classified as Primary Blanket Materials, which have the greatest influence in determining the overall design and performance, and Secondary Blanket Materials, which have key functions in the operation of the blanket but are less important in establishing the overall design and performance. The issues associated with the blanket materials are specified and several examples of materials performance are given. Critical data needs are identified.

  20. Nondestructive material characterization

    DOE Patents [OSTI]

    Deason, Vance A. (Idaho Falls, ID); Johnson, John A. (Idaho Falls, ID); Telschow, Kenneth L. (Idaho Falls, ID)

    1991-01-01T23:59:59.000Z

    A method and apparatus for nondestructive material characterization, such as identification of material flaws or defects, material thickness or uniformity and material properties such as acoustic velocity. The apparatus comprises a pulsed laser used to excite a piezoelectric (PZ) transducer, which sends acoustic waves through an acoustic coupling medium to the test material. The acoustic wave is absorbed and thereafter reflected by the test material, whereupon it impinges on the PZ transducer. The PZ transducer converts the acoustic wave to electrical impulses, which are conveyed to a monitor.

  1. EC Transmission Line Materials

    SciTech Connect (OSTI)

    Bigelow, Tim S [ORNL

    2012-05-01T23:59:59.000Z

    The purpose of this document is to identify materials acceptable for use in the US ITER Project Office (USIPO)-supplied components for the ITER Electron cyclotron Heating and Current Drive (ECH&CD) transmission lines (TL), PBS-52. The source of material property information for design analysis shall be either the applicable structural code or the ITER Material Properties Handbook. In the case of conflict, the ITER Material Properties Handbook shall take precedence. Materials selection, and use, shall follow the guidelines established in the Materials Assessment Report (MAR). Materials exposed to vacuum shall conform to the ITER Vacuum Handbook. [Ref. 2] Commercial materials shall conform to the applicable standard (e.g., ASTM, JIS, DIN) for the definition of their grade, physical, chemical and electrical properties and related testing. All materials for which a suitable certification from the supplier is not available shall be tested to determine the relevant properties, as part of the procurement. A complete traceability of all the materials including welding materials shall be provided. Halogenated materials (example: insulating materials) shall be forbidden in areas served by the detritiation systems. Exceptions must be approved by the Tritium System and Safety Section Responsible Officers.

  2. INTERDISCIPLINARY MATERIALS SCIENCE GRADUATE PROGRAM IN MATERIALS SCIENCE

    E-Print Network [OSTI]

    Simaan, Nabil

    .m.satterwhite@vanderbilt.edu Interdisciplinary Graduate Program in Materials Science Vanderbilt University School of Engineering PMB 350106INTERDISCIPLINARY MATERIALS SCIENCE GRADUATE PROGRAM IN MATERIALS SCIENCE Materials advancements, faculty members from chemistry, physics, materials engineering, chemical engineering, electrical

  3. U-195: PHPlist Input Validation Flaws Permit Cross-Site Scripting and SQL Injection Attacks

    Broader source: Energy.gov [DOE]

    The 'public_html/lists/admin' pages do not properly validate user-supplied input in the 'sortby' parameter [CVE-2012-2740]. A remote authenticated administrative user can supply a specially crafted parameter value to execute SQL commands on the underlying database.

  4. Maximum Output Amplitude of Linear Systems for certain Input Constraints1

    E-Print Network [OSTI]

    Sontag, Eduardo

    of this input and calculates the maximum amplitude of the output. The solution of this problem is a necessary, Linear Sys- tems. 1 Introduction and Motivation Most practical control problems are dominated by hard bounds. Valves can only be operated between fully open and fully closed, pumps and compressors have

  5. Blind Channel Estimation in OFDM Systems by Relying on the Gaussian Assumption of the Input

    E-Print Network [OSTI]

    Quadeer, Ahmed Abdul

    Blind Channel Estimation in OFDM Systems by Relying on the Gaussian Assumption of the Input T. Y methods rely on some form of training which reduces the useful data rate. Here instead we blindly estimate maxima of the ML objective function. One is the blind Genetic algorithm and the other is the semi-blind

  6. A wrapper approach to supervised input selection using simulated M. Filippone, F. Masulli, S. Rovetta

    E-Print Network [OSTI]

    Filippone, Maurizio

    objectives of highlighting the relevant variables (genes) and improving classification results. In this paper Simulated Annealing coupled with supervised classifiers. The proposed approach can perform global combinatorial searches through the space of all possible input subsets, can handle cases with numerical

  7. Linear Feedback Control Input under Actuator Saturation: a Takagi-Sugeno Approach

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    Linear Feedback Control Input under Actuator Saturation: a Takagi-Sugeno Approach Souad Bezzaoucha into account the effect of saturation throughout the design procedure, a controller that may be linear. The third strategy is a two-step approach in which a nominal linear controller is first constructed

  8. OPTIMAL REGULATOR FOR LINEAR SYSTEMS WITH TIME DELAY IN CONTROL INPUT

    E-Print Network [OSTI]

    OPTIMAL REGULATOR FOR LINEAR SYSTEMS WITH TIME DELAY IN CONTROL INPUT MICHAEL BASIN JESUS RODRIGUEZ are included. Keywords: Linear Time-Delay System; Optimal Control; Filtering Category of the paper: Regular 1 Introduction Although the optimal control (regulator) problem for linear system states was solved, as well

  9. A constructive interior penalty method for optimal control problems with state and input constraints.

    E-Print Network [OSTI]

    which allows us to address constrained optimal control of non linear systems by interior penalty methods in the article. It is shown that it allows us to approach the solution of the non linear optimal control problem a constrained optimal control problem (COCP) for a general single-input single-output (SISO) with non linear

  10. RIS-M-2256 INPUT DESCRIPTION FOR THE THREE-DIMENSIONAL

    E-Print Network [OSTI]

    , PWR TYPE REACTORS, REACTOR KINETICS, THREE-DIMENSIONAL CALCULATIONS, TRANSIENTS. UDC 621.039.514 : 621 calculations for the PWR core. It combines a nodal theory neutron kinetics calculation with transient sub calculations. The present report describes the input for ANTI. INIS descriptors; A CODES, BURNUP, HYDRAULICS

  11. Nuclear norm system identification with missing inputs and outputs Zhang Liua,

    E-Print Network [OSTI]

    Vandenberghe, Lieven

    Nuclear norm system identification with missing inputs and outputs Zhang Liua, , Anders Hanssonb,1 formulation and uses the nuclear norm heuristic for structured low-rank matrix approximation, with the missing of the alternating direc- tion method of multipliers (ADMM) to solve regularized or non-regularized nuclear norm

  12. Assisted Teleoperation Strategies for Aggressively Controlling a Robot Arm with 2D Input

    E-Print Network [OSTI]

    Indiana University

    Assisted Teleoperation Strategies for Aggressively Controlling a Robot Arm with 2D Input Erkang You,hauserk}@indiana.edu Abstract--This paper studies assisted teleoperation techniques for controlling a 6DOF robot arm using click, and overall satisfaction. I. INTRODUCTION Assisted teleoperation allows a user to operate a robot while

  13. Responses of Magnocellular Neurons to Osmotic Stimulation Involves Coactivation of Excitatory and Inhibitory Input: An

    E-Print Network [OSTI]

    Feng, Jianfeng

    of normal rats respond to intra- venous infusions of hypertonic saline with gradual, linear in- creases response to such infusions. We show that a simple computational model can reproduce these responses well, but only if it is assumed that hypertonic infusions coacti- vate excitatory and inhibitory synaptic inputs

  14. Calibration of a distributed flood forecasting model with input uncertainty using a Bayesian framework

    E-Print Network [OSTI]

    Hubbard, Susan

    Calibration of a distributed flood forecasting model with input uncertainty using a Bayesian; revised 20 June 2012; accepted 28 June 2012; published 15 August 2012. [1] In the process of calibrating that the developed method generally is effective in calibrating GBHM parameters and in estimating their associated

  15. Using Feedforward Neural Networks and Forward Selection of Input Variables for an Ergonomics Data

    E-Print Network [OSTI]

    Kaber, David B.

    Using Feedforward Neural Networks and Forward Selection of Input Variables for an Ergonomics Data-gradient algorithm to develop an FNN. This article presents an incremental step in the use of FNNs for ergonomics enhancing the effectiveness of the use of neural networks when observations are missing from ergonomics

  16. Optical induction of plasticity at single synapses reveals input-specific accumulation of CaMKII

    E-Print Network [OSTI]

    Oertner, Thomas

    Optical induction of plasticity at single synapses reveals input-specific accumulation of Ca spines on the same dendrite, providing evidence that CaMKII accumulation at postsynaptic sites induces CaMKII accumulation in spines (810) have created much interest because CaMKII activation is both

  17. Characteristic Operator Functions for Quantum Input-Plant-Output Models & Coherent Control

    E-Print Network [OSTI]

    J. E. Gough

    2015-01-09T23:59:59.000Z

    We introduce the characteristic operator as the generalization of the usual concept of a transfer function of linear input-plant-output systems to arbitrary quantum nonlinear Markovian input-output models. This is intended as a tool in the characterization of quantum feedback control systems that fits in with the general theory of networks. The definition exploits the linearity of noise differentials in both the plant Heisenberg equations of motion and the differential form of the input-output relations. Mathematically, the characteristic operator is a matrix of dimension equal to the number of outputs times the number of inputs (which must coincide), but with entries that are operators of the plant system. In this sense the characteristic operator retains details of the effective plant dynamical structure and is an essentially quantum object. We illustrate the relevance to model reduction and simplification by showing that the convergence of the characteristic operator in adiabatic elimination limit models requires the same conditions and assumptions appearing in the work on limit quantum stochastic differential theorems of Bouten and Silberfarb. This approach also shows in a natural way that the limit coefficients of the quantum stochastic differential equations in adiabatic elimination problems arise algebraically as Schur complements, and amounts to a model reduction where the fast degrees of freedom are decoupled from the slow ones, and eliminated.

  18. BPO Inputs to ITER Design Review on Pellet Pacing, RMP and RWM Coils,

    E-Print Network [OSTI]

    BPO Inputs to ITER Design Review on Pellet Pacing, RMP and RWM Coils, and Disruption Mitigation Collaboration Essential Ingredient Contributions to Pellet Pacing USBPO: L. Baylor and P. Parks EU: P. Lang, A the acceptable energy loss from ELMs. Reducing the energy loss to pellet pacing is challenging. DIII

  19. Effects of weld preheat temperature and heat input on type IV failure

    E-Print Network [OSTI]

    Cambridge, University of

    Effects of weld preheat temperature and heat input on type IV failure J. A. Francis*1 , G. M. D of a welded joint due to an enhanced rate of creep void formation in the fine grained or intercritically standpoint, and comparatively little effort has been directed at understanding the effects of welding

  20. Evidence for Interhemispheric Processing of Inputs From the Hands in Human S2 and PV

    E-Print Network [OSTI]

    Krubitzer, Leah A.

    Evidence for Interhemispheric Processing of Inputs From the Hands in Human S2 and PV ELIZABETH S2 and PV. J Neurophysiol 85: 22362244, 2001. In the present investigation, we identified cortical somatosensory (S2) and the parietal ventral (PV) areas, was significantly larger for bilateral stimulation than

  1. Elevated CO2 stimulates grassland soil respiration by increasing carbon inputs rather than by enhancing soil

    E-Print Network [OSTI]

    Minnesota, University of

    Elevated CO2 stimulates grassland soil respiration by increasing carbon inputs rather than It is not clear whether the consistent positive effect of elevated CO2 on soil respiration (soil carbon flux, SCF) results from increased plant and microbial activity due to (i) greater C availability through CO2-induced

  2. Estuaries Vol. 18, No. 16, p. 285-314 March 1995 Inputs, Transformations, and Transport of

    E-Print Network [OSTI]

    Boynton, Walter R.

    ) and total phosphorus (TP) for ChesapeakeBay and three of its tributaryestuaries(Potomac, Patuxent-yrrecord for the SusquehannaRiver indicatesthatannual loads of TN and TP have varied by about 2-fold and 4% of the TN and TP inputs to the mainstreamChesapeake and Potomac River. The direct depositionof

  3. Input Substitution and Business Energy Consumption: Evidence from ABS Energy Survey Data

    E-Print Network [OSTI]

    1 Input Substitution and Business Energy Consumption: Evidence from ABS Energy Survey Data Kay Cao applies the system of equations approach to energy consumption modelling using the ABS 2008-09 Energy of equations, energy consumption modelling, elasticity of substitution JEL codes: C51, D24 * Please do

  4. Home Energy Saver Web Site Documentation Version 1.2 Documentation of Calculation Methodology, Input Data,

    E-Print Network [OSTI]

    Methodology, Input Data, and Infrastructure for the Home Energy Saver Web Site Margaret J. Pinckard, Richard E decisions about energy use in their homes. This report describes the underlying methods and data for estimating energy consumption. Using engineering models, the site estimates energy consumption for six major

  5. Position Teaching of a Robot Arm by Demonstration with a Wearable Input Device

    E-Print Network [OSTI]

    Duckett, Tom

    Position Teaching of a Robot Arm by Demonstration with a Wearable Input Device Jacopo Aleotti device for sensing human arm movements to the software con- troller of a robot arm. The method does method of mapping human motions to the robotic arm domain, assuming that a redundant human arm is used

  6. WRAPHydro Data Model: Finding Input Parameters for the Water Rights Analysis Package

    E-Print Network [OSTI]

    Gopalan, Hema

    .3 Loading Junctions .............................................................................59 6.4 HydroID Assignment ........................................................................60 6.5 WRAP input parameters... .....................................................................................82 7.3.1 Selecting streams and placing outlet points ..................................82 7.3.2 Assigning Regional HydroIDs ......................................................84 7.3.3 Merging Areas...

  7. CRYOGENIC TESTING OF THE RF INPUT WAVEGUIDE FOR THE CEBAF UPGRADE CRYOMODULE*

    E-Print Network [OSTI]

    CRYOGENIC TESTING OF THE RF INPUT WAVEGUIDE FOR THE CEBAF UPGRADE CRYOMODULE* T. Hiatt , M. Breth to support the planned CEBAF upgrade at the Jefferson Lab a new cryomodule has been designed. A key component original CEBAF waveguides. A series of tests were performed on the waveguide to include temperature

  8. An architecture for intelligent sensors and fuzzy inputs for fuzzy logic controllers

    E-Print Network [OSTI]

    Gillespie, Charles Wayne

    1993-01-01T23:59:59.000Z

    in situations where an adequate model of the system is not available. But the controller may only be as good as the quality of the sensor values that provide input to it. The quality of the sensor values is of great concern for designers. Just as in the cases...

  9. Total electron and proton energy input during auroral substorms: Remote sensing with IMAGE-FUV

    E-Print Network [OSTI]

    California at Berkeley, University of

    Total electron and proton energy input during auroral substorms: Remote sensing with IMAGE-FUV B the ionospheric Pedersen conductivity and produces Joule heat- ing in the presence of an electric field. In addition, part of the energy of the auroral particles is dissipated into local heating through dissociation

  10. Increasing the robustness of the input-shaping method using adaptive control

    E-Print Network [OSTI]

    Dharne, Avinash Gopal

    2002-01-01T23:59:59.000Z

    Input-Shaping is a widely used method of suppressing residual vibrations in point-to-point motion of flexible bodies. It is easy to implement and gives good results if the dynamics of the system are known accurately. However, it is not very robust...

  11. Using Relative Costs in Workflow Scheduling to Cope with Input Data Uncertainty

    E-Print Network [OSTI]

    Sakellariou, Rizos

    2012 ACM 978-1-4503-1608-8/12/12 ...$15.00. the heterogeneous resources in order to estimate the exeUsing Relative Costs in Workflow Scheduling to Cope with Input Data Uncertainty Luiz F. Bittencourt the application, a scheduler must distribute the components of the workflow in the avail- able resources using

  12. Input Power Measurement Techniques for Single-Phase Digitally Controlled PFC Rectifiers

    E-Print Network [OSTI]

    resulting in accurate input power measurements are outlined. 1. INTRODUCTION Time-of-use marketing are required for both "time-of-use" billing and system power management purposes. When a digitally controlled. Experimental results comparing and contrasting the perfor- mance of the power measurement architectures

  13. Temperature-aware NBTI modeling and the impact of input vector control on performance degradation

    E-Print Network [OSTI]

    Wang, Yu

    Temperature-aware NBTI modeling and the impact of input vector control on performance degradation performance degradation in dig- ital circuits by affecting PMOS threshold voltage, is emerging as one devices and propose a novel temporal performance degradation model for digital cir- cuits considering

  14. Modeling and Control of Heterogeneous Non-Holonomic Input-Constrained Multiagent Systems

    E-Print Network [OSTI]

    Loizou, Savvas G.

    of multiple-aircraft systems modeled as hybrid systems. With the advent of powerful formal verification toolsModeling and Control of Heterogeneous Non-Holonomic Input-Constrained Multiagent Systems Apollon S of the paper, we develop a modeling framework for heterogeneous multi-agent systems that is based on timed

  15. Study on the Procedural Generation of Visualization from Musical Input using Generative Art Techniques

    E-Print Network [OSTI]

    Garcia, Christopher

    2011-08-08T23:59:59.000Z

    . There should be an obvious similarity between the input music and the final animation, based on the music information which the user decides to extract and visualize. This project includes a pipeline for music data extraction and creation of an editable...

  16. Control of linear systems subject to input constraints: a polynomial approach. \\Lambda

    E-Print Network [OSTI]

    Henrion, Didier

    rely on the extended Farkas lemma [14], linear programming [32, 9], eigenstructure assignment [8, 9Control of linear systems subject to input constraints: a polynomial approach. \\Lambda Didier Republic Abstract A polynomial approach is pursued for locally stabilizing discretetime linear systems

  17. Arctic methane sources: Isotopic evidence for atmospheric inputs R. E. Fisher,1

    E-Print Network [OSTI]

    Sheldon, Nathan D.

    Arctic methane sources: Isotopic evidence for atmospheric inputs R. E. Fisher,1 S. Sriskantharajah,1 D. Lowry,1 M. Lanoisell,1 C. M. R. Fowler,1 R. H. James,2 O. Hermansen,3 C. Lund Myhre,3 A. Stohl,3 J. Greinert,4 P. B. R. NisbetJones,5 J. Mienert,6 and E. G. Nisbet1 Received 16 August 2011

  18. Analytical input-output and supply chain study of China's coke and steel sectors

    E-Print Network [OSTI]

    Li, Yu, 1976-

    2004-01-01T23:59:59.000Z

    I design an input-output model to investigate the energy supply chain of coal-coke-steel in China. To study the demand, supply, and energy-intensity issues for coal and coke from a macroeconomic perspective, I apply the ...

  19. Membrane potential and spike train statistics depend distinctly on input statistics Robert Rosenbaum1

    E-Print Network [OSTI]

    Azevedo, Ricardo

    - niques such as voltage sensitive dyes and local field po- tentials capture a mixture of subthreshold are most sensitive to modula- tions of a cell's input current when excitation is strong and firing rates. For example, the correlation between two signals obtained from voltage sensitive dyes or local field

  20. Wide input range DC-DC converter with digital control scheme

    E-Print Network [OSTI]

    Harfman Todorovic, Maja

    2006-04-12T23:59:59.000Z

    In this thesis analysis and design of a wide input range DC-DC converter is proposed along with a robust power control scheme. The proposed converter and its control is designed to be compatible to a fuel cell power source, which exhibits 2...

  1. Determining Spatial and Temporal Inputs of Freshwater, Including Submarine Groundwater Discharge,

    E-Print Network [OSTI]

    Miami, University of

    of freshwater into the bay. A second model using Sr2+ /Ca2+ ratios was developed to discern fresh groundwater. Florida . Submarine groundwater discharge Introduction The timing and sources of freshwater deliveryDetermining Spatial and Temporal Inputs of Freshwater, Including Submarine Groundwater Discharge

  2. Materials Science & Engineering

    E-Print Network [OSTI]

    and Forensics team in the Polymers and Coatings Group, MST-7. He graduated from the University of Toledo, aerogels, carbon fiber composites, damaged materials, and low density materials examining defects

  3. Institute for Materials Science

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Institute for Material Science Who we are and what we do 2:23 Institute for Materials Science: Alexander V. Balatsky IMS is an interdisciplinary research and educational center...

  4. Electronic digital materials

    E-Print Network [OSTI]

    Langford, William Kai

    2014-01-01T23:59:59.000Z

    Digital materials are constructions assembled from a small number of types of discrete building blocks; they represent a new way of building functional, multi-material, three-dimensional structures. In this thesis, I focus ...

  5. Geopolymer Sealing Materials

    Broader source: Energy.gov [DOE]

    DOE Geothermal Peer Review 2010 - Presentation. Project objectives: Develop and characterize field-applicable geopolymer temporary sealing materials in the laboratory and to transfer this developed material technology to geothermal drilling service companies as collaborators for field validation tests.

  6. Nanocomposites as thermoelectric materials

    E-Print Network [OSTI]

    Hao, Qing

    2010-01-01T23:59:59.000Z

    Thermoelectric materials have attractive applications in electric power generation and solid-state cooling. The performance of a thermoelectric device depends on the dimensionless figure of merit (ZT) of the material, ...

  7. Factors of material consumption

    E-Print Network [OSTI]

    Silva Daz, Pamela Cristina

    2012-01-01T23:59:59.000Z

    Historic consumption trends for materials have been studied by many researchers, and, in order to identify the main drivers of consumption, special attention has been given to material intensity, which is the consumption ...

  8. Nanostructured composite reinforced material

    DOE Patents [OSTI]

    Seals, Roland D. (Oak Ridge, TN); Ripley, Edward B. (Knoxville, TN); Ludtka, Gerard M. (Oak Ridge, TN)

    2012-07-31T23:59:59.000Z

    A family of materials wherein nanostructures and/or nanotubes are incorporated into a multi-component material arrangement, such as a metallic or ceramic alloy or composite/aggregate, producing a new material or metallic/ceramic alloy. The new material has significantly increased strength, up to several thousands of times normal and perhaps substantially more, as well as significantly decreased weight. The new materials may be manufactured into a component where the nanostructure or nanostructure reinforcement is incorporated into the bulk and/or matrix material, or as a coating where the nanostructure or nanostructure reinforcement is incorporated into the coating or surface of a "normal" substrate material. The nanostructures are incorporated into the material structure either randomly or aligned, within grains, or along or across grain boundaries.

  9. VHTR Materials Overview

    SciTech Connect (OSTI)

    Wright, Richard [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2013-07-30T23:59:59.000Z

    The PowerPoint presentation was given at the DOE-NE Materials Crosscut Coordination Meeting, Tuesday, 30 July 2013.

  10. Research Councils UK materials

    E-Print Network [OSTI]

    Berzins, M.

    as completely new materials such as super-strong graphene, or developments of traditional materials such as graphene is still being realised, with the Research Councils investing in both the further exploitation to UK growth. For example, the 2004 `discovery' of wonder-material graphene sparked a host of global

  11. MATERIALS SCIENCE ENGINEERING

    E-Print Network [OSTI]

    California at Irvine, University of

    MATERIALS SCIENCE AND ENGINEERING GRADUATE MANUAL COLLEGE OF ENGINEERING UNIVERSITY OF CALIFORNIA AT BERKELEY October 23, 2013 #12;Materials Science and Engineering University of California at Berkeley Page 2 Subject Matter Outcome of the Preliminary Exam #12;Materials Science and Engineering University

  12. MATERIALS SCIENCE AND ENGINEERING

    E-Print Network [OSTI]

    Knobloch,Jrgen

    MATERIALS SCIENCE AND ENGINEERING BACHELOR OF SCIENCE MASTER OF SCIENCE Get your own impression. Materials Science and Engineering in Ilmenau stands for: + a broad and practical university education Catlica del Peru (PUCP) in Lima/Peru and to receive a double degree in Materials Science and Engineering

  13. Radioactive Materials License Commitments

    E-Print Network [OSTI]

    Radioactive Materials License Commitments for The University of Texas at Austin May 2009 July 2009 in the use of radioactive materials. In July 1963, the State of Texas granted The University of Texas at Austin a broad radioactive materials license for research, development and instruction. While this means

  14. Advanced neutron absorber materials

    DOE Patents [OSTI]

    Branagan, Daniel J. (Idaho Falls, ID); Smolik, Galen R. (Idaho Falls, ID)

    2000-01-01T23:59:59.000Z

    A neutron absorbing material and method utilizing rare earth elements such as gadolinium, europium and samarium to form metallic glasses and/or noble base nano/microcrystalline materials, the neutron absorbing material having a combination of superior neutron capture cross sections coupled with enhanced resistance to corrosion, oxidation and leaching.

  15. Lightweight materials for transportation: Program plan

    SciTech Connect (OSTI)

    Not Available

    1993-07-01T23:59:59.000Z

    This Program Plan has been prepared by the Office of Transportation Materials in response to a request by the House Committee on Appropriations. It recognizes that a significant commitment to long-term, stable materials research and development (R&D) is required to realize the benefits of lighter weight vehicles, including economic, environmental and energy related benefits. Extensive input was obtained from the major US automakers and from representative materials and component suppliers. Considerable interaction with the key members of the US Automotive Materials Partnership (USAMP) has ensured consistency of technical direction. The program will support R&D activity at industrial sites through competitively bid subcontracts with cost sharing anticipated at 30--50%, with the higher amounts in process scale-up and manufacturing technology development. The recommended LWM Program will enable industry to develop pecessary technology by utilizing their capabilities as well as accessing supporting technology at national laboratories, universities, ongoing program activity at NASA, DoD, DOT, NIST, etc., and thereby leverage industry resources through integrated team approaches. Many individual program efforts are currently in place that address small portions of the overall needs of the LWM Program, both within DOE and in other agencies. Cognizance of these and overall integration of research activities are planned as significant program management tasks. Because of the international nature of the automobile business, benchmarking of foreign technology and tracking of worldwide developments are also key program elements.

  16. Purdue University October 2, 2009 Multi-Input Multi-Output (MIMO)

    E-Print Network [OSTI]

    Ulsoy, A. Galip

    production rate for complex geometry parts (e.g., body/ structure panels in automotive and home Challenges: use of new materials Objectives: light weight and/or higher strength. New materials: aluminum

  17. Development of the fundamental attributes and inputs for proliferation resistance assessments of nuclear fuel cycles

    E-Print Network [OSTI]

    Giannangeli, Donald D. J., III

    2007-09-17T23:59:59.000Z

    threats such as theft or terrorism to future work. A new approach is presented that assesses the problem through four stages of proliferation: the diversion of nuclear material, the transportation of nuclear material from an internationally safeguarded...

  18. Materials Science and Materials Chemistry for Large Scale Electrochemi...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science and Materials Chemistry for Large Scale Electrochemical Energy Storage: From Transportation to Electrical Grid Materials Science and Materials Chemistry for Large Scale...

  19. FY 2009 Progress Report for Lightweighting Materials - 12. Materials...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for Lightweighting Materials - 12. Materials Crosscutting Research and Development The primary Lightweight Materials activity goal is to validate a cost-effective weight reduction...

  20. ADVANCED MATERIALS Curriculum Biomaterials Materials Science I 5 CP Materials Science II 5 CP Lab Materials Science II 5 CP

    E-Print Network [OSTI]

    Pfeifer, Holger

    ADVANCED MATERIALS Curriculum Biomaterials Materials Science I 5 CP Materials Science II 5 CP Lab Materials Science II 5 CP Computational Methods in Materials Science 4 CP Lab Materials Science I 5 CP Physical Chemistry 4 CP General Chemistry 2 CP Synthesis of Org. & Inorg. Materials 4 CP Introductory Solid

  1. Method and apparatus for smart battery charging including a plurality of controllers each monitoring input variables

    DOE Patents [OSTI]

    Hammerstrom, Donald J.

    2013-10-15T23:59:59.000Z

    A method for managing the charging and discharging of batteries wherein at least one battery is connected to a battery charger, the battery charger is connected to a power supply. A plurality of controllers in communication with one and another are provided, each of the controllers monitoring a subset of input variables. A set of charging constraints may then generated for each controller as a function of the subset of input variables. A set of objectives for each controller may also be generated. A preferred charge rate for each controller is generated as a function of either the set of objectives, the charging constraints, or both, using an algorithm that accounts for each of the preferred charge rates for each of the controllers and/or that does not violate any of the charging constraints. A current flow between the battery and the battery charger is then provided at the actual charge rate.

  2. Gain, directionality and noise in microwave SQUID amplifiers: Input-output approach

    E-Print Network [OSTI]

    Archana Kamal; John Clarke; Michel Devoret

    2012-06-20T23:59:59.000Z

    We present a new theoretical framework to analyze microwave amplifiers based on the dc SQUID. Our analysis applies input-output theory generalized for Josephson junction devices biased in the running state. Using this approach we express the high frequency dynamics of the SQUID as a scattering between the participating modes. This enables us to elucidate the inherently nonreciprocal nature of gain as a function of bias current and input frequency. This method can, in principle, accommodate an arbitrary number of Josephson harmonics generated in the running state of the junction. We report detailed calculations taking into account the first few harmonics that provide simple semi-quantitative results showing a degradation of gain, directionality and noise of the device as a function of increasing signal frequency. We also discuss the fundamental limits on device performance and applications of this formalism to real devices.

  3. EPICS Input/Output Controller (IOC) application developer`s guide. APS Release 3.12

    SciTech Connect (OSTI)

    Kraimer, M.R.

    1994-11-01T23:59:59.000Z

    This document describes the core software that resides in an Input/Output Controller (IOC), one of the major components of EPICS. The basic components are: (OPI) Operator Interface; this is a UNIX based workstation which can run various EPICS tools; (IOC) Input/Output Controller; this is a VME/VXI based chassis containing a Motorola 68xxx processor, various I/O modules, and VME modules that provide access to other I/O buses such as GPIB, (LAN), Local Area Network; and this is the communication network which allows the IOCs and OPIs to communicate. Epics provides a software component, Channel Access, which provides network transparent communication between a Channel Access client and an arbitrary number of Channel Access servers.

  4. The variable input coupler for the Fermilab Vertical Cavity Test Facility

    SciTech Connect (OSTI)

    Champion, Mark; Ginsburg, Camille M.; Lunin, Andrei; /Fermilab; Moeller, Wolf-Dietrich; /DESY; Nehring, Roger; Poloubotko, Valeri; /Fermilab

    2008-09-01T23:59:59.000Z

    A variable input coupler has been designed for the Fermilab vertical cavity test facility (VCTF), a facility for CW RF vertical testing of bare ILC 1.3 GHz 9-cell SRF cavities at 2K, to provide some flexibility in the test stand RF measurements. The variable coupler allows the cavity to be critically coupled for all RF tests, including all TM010 passband modes, which will simplify or make possible the measurement of those modes with very low end-cell fields, e.g., {pi}/9 mode. The variable coupler assembly mounts to the standard input coupler port on the cavity, and uses a cryogenic motor submerged in superfluid helium to control the antenna position. The RF and mechanical design and RF test results are described.

  5. Leaf dynamics, stemflow and throughfall water and nutrient inputs in a subtropical savanna parkland, Texas

    E-Print Network [OSTI]

    Angerer, Jay Peter

    1991-01-01T23:59:59.000Z

    for K, followed by Mg, P, N and Ca. Annual throughfall and stemflow inputs (both nutrients and water) differed among clusters as a result of differing shrub cluster size, total canopy area, and species composition. Throughfall generally made up 97... of Shrub Clusters Plant abundance and size Biomass above BTF collectors Potential Leachability Calcium Magnesium Potassium Nitrogen Phosphorus Bulk Precipitation and Bulk Throughfall Chemistry Nutrient concentrations Regression relationships...

  6. Algorithm 2: p-adic Lifting with Rational Reconstruction Input: Matrix A Qnn

    E-Print Network [OSTI]

    Algorithm 2: p-adic Lifting with Rational Reconstruction Input: Matrix A Qnn [z], vector B Qn [z in A and B. 2. Pick a prime p which splits m(z) and find all roots r1, . . . , rd of m(z) mod p. 3. Set k := 1, error := B and compute A-1 (ri) mod p for i = 1, 2, . . . , d. If A(rj) is not invertible (mod p

  7. Absolute nuclear material assay

    DOE Patents [OSTI]

    Prasad, Manoj K. (Pleasanton, CA); Snyderman, Neal J. (Berkeley, CA); Rowland, Mark S. (Alamo, CA)

    2012-05-15T23:59:59.000Z

    A method of absolute nuclear material assay of an unknown source comprising counting neutrons from the unknown source and providing an absolute nuclear material assay utilizing a model to optimally compare to the measured count distributions. In one embodiment, the step of providing an absolute nuclear material assay comprises utilizing a random sampling of analytically computed fission chain distributions to generate a continuous time-evolving sequence of event-counts by spreading the fission chain distribution in time.

  8. Absolute nuclear material assay

    DOE Patents [OSTI]

    Prasad, Manoj K. (Pleasanton, CA); Snyderman, Neal J. (Berkeley, CA); Rowland, Mark S. (Alamo, CA)

    2010-07-13T23:59:59.000Z

    A method of absolute nuclear material assay of an unknown source comprising counting neutrons from the unknown source and providing an absolute nuclear material assay utilizing a model to optimally compare to the measured count distributions. In one embodiment, the step of providing an absolute nuclear material assay comprises utilizing a random sampling of analytically computed fission chain distributions to generate a continuous time-evolving sequence of event-counts by spreading the fission chain distribution in time.

  9. Vibrational Damping of Composite Materials

    E-Print Network [OSTI]

    Biggerstaff, Janet M.

    2006-01-01T23:59:59.000Z

    Smart Structures and Materials, 3989:531- 538. Biggerstaff,2002. Electroviscoelastic Materials As Active Dampers,Smart Structures and Materials, 4695:345-350. Biggerstaff,

  10. Deformation Mechanisms in Nanocrystalline Materials

    E-Print Network [OSTI]

    Mohamed, Farghalli A.; Yang, Heather

    2010-01-01T23:59:59.000Z

    2010 METALLURGICAL AND MATERIALS TRANSACTIONS A 47. F.A.12. METALLURGICAL AND MATERIALS TRANSACTIONS A VOLUME 41A,of Slip: Progress in Materials Science, Pergamon Press,

  11. Advanced Materials | More Science | ORNL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Materials SHARE Advanced Materials ORNL has the nation's most comprehensive materials research program and is a world leader in research that supports the development of...

  12. Wide Bandgap Materials

    Broader source: Energy.gov (indexed) [DOE]

    Materials Madhu Chinthavali Oak Ridge National Laboratory May 15, 2012 Project ID: APE007 This presentation does not contain any proprietary, confidential, or otherwise restricted...

  13. Critical Materials Strategy Summary

    Broader source: Energy.gov (indexed) [DOE]

    in magnets, batteries, photovoltaic films and phosphors; environmentally sound mining and materials processing; and recycling. The eight programs and policies address...

  14. Radioactive Material Transportation Practices

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2002-09-23T23:59:59.000Z

    Establishes standard transportation practices for Departmental programs to use in planning and executing offsite shipments of radioactive materials including radioactive waste. Does not cancel other directives.

  15. Management of Nuclear Materials

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-08-17T23:59:59.000Z

    To establish requirements for the lifecycle management of DOE owned and/or managed accountable nuclear materials. Cancels DOE O 5660.1B.

  16. UESC Workshop Materials

    Broader source: Energy.gov (indexed) [DOE]

    Policy Act (NEPA) Detailed disposal requirements statement for hazardous materials related to the project are essential It is in the FAR Subpart 23.3. Acquisition...

  17. Geopolymer Sealing Materials

    Broader source: Energy.gov (indexed) [DOE]

    Geopolymer Sealing Materials PI : Dr. Tomas Butcher Presenter: Dr. Toshi Sugama Brookhaven National Laboratory May 18, 2010 This presentation does not contain any proprietary...

  18. Materials for MA 182.

    E-Print Network [OSTI]

    Materials for MA 182. INSTRUCTOR: Richard Penney. Office: MATH 822: Telephone: 494-1968: e-mail: rcp@math.purdue.edu: Office Hours: Mon, Tu, Fri,

  19. Layered Cathode Materials

    Broader source: Energy.gov (indexed) [DOE]

    Layered Cathode Materials presented by Michael Thackeray Chemical Sciences and Engineering Division, Argonne Annual Merit Review DOE Vehicle Technologies Program Washington, D.C....

  20. EMSL - battery materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    battery-materials en Modeling Interfacial Glass-Water Reactions: Recent Advances and Current Limitations. http:www.emsl.pnl.govemslwebpublicationsmodeling-interfacial-glass-wa...

  1. Thermoelectric materials having porosity

    DOE Patents [OSTI]

    Heremans, Joseph P.; Jaworski, Christopher M.; Jovovic, Vladimir; Harris, Fred

    2014-08-05T23:59:59.000Z

    A thermoelectric material and a method of making a thermoelectric material are provided. In certain embodiments, the thermoelectric material comprises at least 10 volume percent porosity. In some embodiments, the thermoelectric material has a zT greater than about 1.2 at a temperature of about 375 K. In some embodiments, the thermoelectric material comprises a topological thermoelectric material. In some embodiments, the thermoelectric material comprises a general composition of (Bi.sub.1-xSb.sub.x).sub.u(Te.sub.1-ySe.sub.y).sub.w, wherein 0.ltoreq.x.ltoreq.1, 0.ltoreq.y.ltoreq.1, 1.8.ltoreq.u.ltoreq.2.2, 2.8.ltoreq.w.ltoreq.3.2. In further embodiments, the thermoelectric material includes a compound having at least one group IV element and at least one group VI element. In certain embodiments, the method includes providing a powder comprising a thermoelectric composition, pressing the powder, and sintering the powder to form the thermoelectric material.

  2. Composite of refractory material

    DOE Patents [OSTI]

    Holcombe, Cressie E. (Knoxville, TN); Morrow, Marvin S. (Kingston, TN)

    1994-01-01T23:59:59.000Z

    A composite refractory material composition comprises a boron carbide matrix and minor constituents of yttrium-boron-oxygen-carbon phases uniformly distributed throughout the boron carbide matrix.

  3. LANSCE | Materials Test Station

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research Facility Training Office Contact Administrative nav background Materials Test Station dotline Testing New Reactor Fuels that Reduce Radioactive Waste Mission Used...

  4. Fluorinated elastomeric materials

    DOE Patents [OSTI]

    Lagow, Richard J. (6204 Shadow Mountain, Austin, TX 78731); Dumitru, Earl T. (10116 Aspen St., Austin, TX 78758)

    1986-11-04T23:59:59.000Z

    This invention relates to a method of making perfluorinated elastomeric materials, and to materials made by such methods. In the full synthetic scheme, a partially fluorinated polymeric compound, with moieties to prevent crystallization, is created. It is then crosslinked to a desired degree, then perfluorinated. Various intermediate materials, such as partially fluorinated crosslinked polymers, have useful properties, and are or may become commercially available. One embodiment of this invention therefore relates to perfluorination of a selected partially fluorinated, crosslinked material, which is one step of the full synthetic scheme.

  5. Fluorinated elastomeric materials

    DOE Patents [OSTI]

    Lagow, Richard J. (6204 Shadow Mountain, Austin, TX 78731); Dumitru, Earl T. (10116 Aspen St., Austin, TX 78758)

    1990-02-13T23:59:59.000Z

    This invention relates to a method of making perfluorinated elastomeric materials, and to materials made by such methods. In the full synthetic scheme, a partially fluorinated polymeric compound, with moieties to prevent crystallization, is created. It is then crosslinked to a desired degree, then perfluorinated. Various intermediate materials, such as partially fluorinated crosslinked polymers, have useful properties, and are or may become commercially available. One embodiment of this invention therefore relates to perfluorination of a selected partially fluorinated, crosslinked material, which is one step of the full synthetic scheme.

  6. Composite of refractory material

    DOE Patents [OSTI]

    Holcombe, C.E.; Morrow, M.S.

    1994-07-19T23:59:59.000Z

    A composite refractory material composition comprises a boron carbide matrix and minor constituents of yttrium-boron-oxygen-carbon phases uniformly distributed throughout the boron carbide matrix.

  7. Radiation Safety Training Materials

    Broader source: Energy.gov [DOE]

    The following Handbooks and Standard provide recommended hazard specific training material for radiological workers at DOE facilities and for various activities.

  8. DOE Automotive Lightweighting Materials

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    materials for fiber reinforced composites. Until now, they have only been used in the automotive industry with thermoplastics and not as a matrix for fiber reinforced...

  9. Webinar: Materials Genome Initative

    Broader source: Energy.gov [DOE]

    Audio recording and text version of the Fuel Cell Technologies Office webinar titled "Materials Genome Initiative," originally presented on December 2, 2014.

  10. Hazardous Material Security (Maryland)

    Broader source: Energy.gov [DOE]

    All facilities processing, storing, managing, or transporting hazardous materials must be evaluated every five years for security issues. A report must be submitted to the Department of the...

  11. Materials and Metallurgy Materials Science and Metallurgical Engineering

    E-Print Network [OSTI]

    Provancher, William

    Materials and Metallurgy Materials Science and Metallurgical Engineering Objective Students "Rocks and Materials Science" Presentation. Review uses of rocks. Explain that engineers extract Engineers to efficiently and safely extract ore, Metallurgical Engineers to refine the copper, and Materials

  12. TRANSPORT THEORY AND STATISTICAL PHYSICS, 23(5), 671-700 (1994) OPTIMIZATION OF SOLAR RADIATION INPUT IN FOREST

    E-Print Network [OSTI]

    Myneni, Ranga B.

    1994-01-01T23:59:59.000Z

    biomass through photosynthesis. In general, the supply of radiant energy sets a limit to potential INPUT IN FOREST CANOPY AS A TOOL FOR PLANTING/CUTTING OF TREES Yu. Knyazikhin', (l) A. Marshak,(1) D on the input coefficientsof the derived equation. 1. INTRODUCTION In a plant canopy,the aboveground biomass

  13. DualSamplingRate Moving Horizon Control of a Class of Linear Systems with Input Saturation and Plant Uncertainty --

    E-Print Network [OSTI]

    Dual­Sampling­Rate Moving Horizon Control of a Class of Linear Systems with Input Saturation­sampling­rate moving horizon control scheme for a class of linear, continuous­time plants with strict input saturation, it is not computed by a simple linear feedback law, but as a solution of an optimal control problem. As a result

  14. Integral Input-to-State Stability of the Drive-Train of a Wind Turbine Chen Wang and George Weiss

    E-Print Network [OSTI]

    Sontag, Eduardo

    Abstract-- This paper investigates the stability of a variable- speed wind turbine operating under low of the generator torque. We show that the turbine system is integral input-to-state stable. I. INTRODUCTIONIntegral Input-to-State Stability of the Drive-Train of a Wind Turbine Chen Wang and George Weiss

  15. On the Patterns of Wind-Power Input to the Ocean Circulation FABIEN ROQUET AND CARL WUNSCH

    E-Print Network [OSTI]

    Wunsch, Carl

    On the Patterns of Wind-Power Input to the Ocean Circulation FABIEN ROQUET AND CARL WUNSCH received 1 February 2011, in final form 12 July 2011) ABSTRACT Pathways of wind-power input into the ocean pumping, with a pattern determined by the wind curl rather than the wind itself. Regions of power

  16. Effect of ocean surface currents on wind stress, heat flux, and wind power input to the ocean

    E-Print Network [OSTI]

    Thompson, LuAnne

    Effect of ocean surface currents on wind stress, heat flux, and wind power input to the ocean, J. T., and L. Thompson (2006), Effect of ocean surface currents on wind stress, heat flux, and wind power input to the ocean, Geophys. Res. Lett., 33, L09604, doi:10.1029/2006GL025784. 1. Introduction [2

  17. Abstract The series-input parallel-output dc-dc converter combination provides inherent sharing among the converters.

    E-Print Network [OSTI]

    Kimball, Jonathan W.

    for advanced digital loads. With this control in place, a "super-matched" current sharing control emerges gain produces a "super-match" characteristic that holds even during transient conditions, limited only to function independently, four input capacitors decouple the inputs. (It is advantageous to interleave

  18. Quality assurance with the ISFH-Input/Output-Procedure 6-year-experience with 14 solar thermal systems

    E-Print Network [OSTI]

    Quality assurance with the ISFH-Input/Output-Procedure 6-year-experience with 14 solar thermal the confidence in solar thermal energy. The so called Input/Output-Procedure is controlling the solar heat systems. The simulation model was validated with measured data and a lot of failures in 11 solar thermal

  19. Considerations for Contractile Electroactive Materials and Actuators

    SciTech Connect (OSTI)

    Rasmussen, Lenore; Erickson, Carl J.; Meixler, Lewis D.; Ascione, George; Gentile, Charles A.; Tilson, Carl; Bernasek, Stephen L.; Abelev, Esta

    2010-02-19T23:59:59.000Z

    Ras Labs produces electroactive polymer (EAP) based materials and actuators that bend, swell, ripple and now contract (new development) with low electric input. This is an important attribute because of the ability of contraction to produce life-like motion. The mechanism of contraction is not well understood. Radionuclide-labeled experiments were conducted to follow the movement of electrolytes and water in these EAPs when activated. Extreme temperature experiments were performed on the contractile EAPs with very favorable results. One of the biggest challenges in developing these actuators, however, is the electrode-EAP interface because of the pronounced movement of the EAP. Plasma treatments of metallic electrodes were investigated in order to improve the attachment of the embedded electrodes to the EAP material. Surface analysis, adhesive testing, and mechanical testing were conducted to test metal surfaces and metal-polymer interfaces. The nitrogen plasma treatment of titanium produced a strong metal-polymer interface; however, oxygen plasma treatment of both stainless steel and titanium produced even stronger metal-polymer interfaces. Plasma treatment of the electrodes allows for the embedded electrodes and the EAP material of the actuator to work and move as a unit, with no detachment, by significantly improving the metal-polymer interface.

  20. Data collection handbook to support modeling the impacts of radioactive material in soil

    SciTech Connect (OSTI)

    Yu, C.; Cheng, J.J.; Jones, L.G.; Wang, Y.Y.; Faillace, E. [Argonne National Lab., IL (United States). Environmental Assessment and Information Sciences Div.; Loureiro, C. [Minas Gerais Univ., Belo Horizonte, MG (Brazil). Escola de Engenharia; Chia, Y.P. [National Taiwan Univ., Taipei (Taiwan, Province of China). Dept. of Geology

    1993-04-01T23:59:59.000Z

    A pathway analysis computer code called RESRAD has been developed for implementing US Department of Energy Residual Radioactive Material Guidelines. Hydrogeological, meteorological, geochemical, geometrical (size, area, depth), and material-related (soil, concrete) parameters are used in the RESRAD code. This handbook discusses parameter definitions, typical ranges, variations, measurement methodologies, and input screen locations. Although this handbook was developed primarily to support the application of RESRAD, the discussions and values are valid for other model applications.

  1. From Smart Materials to Cognitive Materials Requirements and Challenges

    E-Print Network [OSTI]

    Bremen, Universitt

    From Smart Materials to Cognitive Materials Requirements and Challenges Lutz Frommberger (lutz materials are materials that are either capa- ble of changing some of their properties according to external within the material itself. The latter is also called sensorial material (Lawo et. al., 2009). Recently

  2. Materials Science and Technology Mechanical and Materials Engineering

    E-Print Network [OSTI]

    Birmingham, University of

    Materials Science and Technology Metallurgy Mechanical and Materials Engineering Materials Science with Energy Engineering Materials Science with Business Management Course Prospectus School of Metallurgy for Metallurgy and Materials What difference will you make? #12;2 School of Metallurgy and Materials Contents

  3. Settlement of Dredged and Contaminated Material Placement Areas. II: Primary Consolidation, Secondary Compression,

    E-Print Network [OSTI]

    Settlement of Dredged and Contaminated Material Placement Areas. II: Primary Consolidation, Secondary Compression, and Desiccation of Dredged Fill Input Parameters Timothy D. Stark 1; Hangseok Choi2, Secondary Compression, and Desiccation of Dredged Fill), which is described in a companion paper

  4. Global sensitivity analysis in welding simulations --what are the material data you really need ?

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    Global sensitivity analysis in welding simulations -- what are the material data you really need methodology is applied to numerical welding simulation in order to rank the importance of input variables on the outputs of the code like distorsions or residual stresses. The numerical welding simulation uses

  5. Concrete Material Models Concrete_1: Concrete Model with No Tensile Strength

    E-Print Network [OSTI]

    Filippou, Filip C.

    Concrete Material Models Concrete_1: Concrete Model with No Tensile Strength INPUT Concrete_1, matID ¢f fc cu u, , ,e e0 Definitions (Fig. 1): fc : concrete compressive strength at 28 days (compression is negative) A0 : concrete strain at maximum strength (compression is negative) fcu : concrete crushing

  6. Nanocrystalline Heterojunction Materials

    DOE Patents [OSTI]

    Elder, Scott H. (Portland, OR); Su, Yali (Richland, WA); Gao, Yufei (Blue Bell, PA); Heald, Steve M. (Downers Grove, IL)

    2004-02-03T23:59:59.000Z

    Mesoporous nanocrystalline titanium dioxide heterojunction materials and methods of making the same are disclosed. In one disclosed embodiment, materials comprising a core of titanium dioxide and a shell of a molybdenum oxide exhibit a decrease in their photoadsorption energy as the size of the titanium dioxide core decreases.

  7. Nanocrystalline heterojunction materials

    DOE Patents [OSTI]

    Elder, Scott H.; Su, Yali; Gao, Yufei; Heald, Steve M.

    2003-07-15T23:59:59.000Z

    Mesoporous nanocrystalline titanium dioxide heterojunction materials are disclosed. In one disclosed embodiment, materials comprising a core of titanium dioxide and a shell of a molybdenum oxide exhibit a decrease in their photoadsorption energy as the size of the titanium dioxide core decreases.

  8. MULTISCALE PHENOMENA IN MATERIALS

    SciTech Connect (OSTI)

    A. BISHOP

    2000-09-01T23:59:59.000Z

    This project developed and supported a technology base in nonequilibrium phenomena underpinning fundamental issues in condensed matter and materials science, and applied this technology to selected problems. In this way the increasingly sophisticated synthesis and characterization available for classes of complex electronic and structural materials provided a testbed for nonlinear science, while nonlinear and nonequilibrium techniques helped advance our understanding of the scientific principles underlying the control of material microstructure, their evolution, fundamental to macroscopic functionalities. The project focused on overlapping areas of emerging thrusts and programs in the Los Alamos materials community for which nonlinear and nonequilibrium approaches will have decisive roles and where productive teamwork among elements of modeling, simulations, synthesis, characterization and applications could be anticipated--particularly multiscale and nonequilibrium phenomena, and complex matter in and between fields of soft, hard and biomimetic materials. Principal topics were: (i) Complex organic and inorganic electronic materials, including hard, soft and biomimetic materials, self-assembly processes and photophysics; (ii) Microstructure and evolution in multiscale and hierarchical materials, including dynamic fracture and friction, dislocation and large-scale deformation, metastability, and inhomogeneity; and (iii) Equilibrium and nonequilibrium phases and phase transformations, emphasizing competing interactions, frustration, landscapes, glassy and stochastic dynamics, and energy focusing.

  9. Impacted material placement plans

    SciTech Connect (OSTI)

    Hickey, M.J.

    1997-01-29T23:59:59.000Z

    Impacted material placement plans (IMPP) are documents identifying the essential elements in placing remediation wastes into disposal facilities. Remediation wastes or impacted material(s) are those components used in the construction of the disposal facility exclusive of the liners and caps. The components might include soils, concrete, rubble, debris, and other regulatory approved materials. The IMPP provides the details necessary for interested parties to understand the management and construction practices at the disposal facility. The IMPP should identify the regulatory requirements from applicable DOE Orders, the ROD(s) (where a part of a CERCLA remedy), closure plans, or any other relevant agreements or regulations. Also, how the impacted material will be tracked should be described. Finally, detailed descriptions of what will be placed and how it will be placed should be included. The placement of impacted material into approved on-site disposal facilities (OSDF) is an integral part of gaining regulatory approval. To obtain this approval, a detailed plan (Impacted Material Placement Plan [IMPP]) was developed for the Fernald OSDF. The IMPP provides detailed information for the DOE, site generators, the stakeholders, regulatory community, and the construction subcontractor placing various types of impacted material within the disposal facility.

  10. Detecting Illicit Nuclear Materials

    SciTech Connect (OSTI)

    Kouzes, Richard T.

    2005-09-01T23:59:59.000Z

    The threat that weapons of mass destruction might enter the United States has led to a number of efforts for the detection and interdiction of nuclear, radiological, chemical, and biological weapons at our borders. There have been multiple deployments of instrumentation to detect radiation signatures to interdict radiological material, including weapons and weapons material worldwide.

  11. The effect of some processing variables on the canning stability of raw and parboiled long-grain rice varieties

    E-Print Network [OSTI]

    Demont, James Ira

    1965-01-01T23:59:59.000Z

    water 0. 25$ 0. 5+ Response 3 22 -1. 24 -2. 01 For the reason mentioned above and the possibility that calcium lactate causes sloughing ot' grain material as does magnesium sulfate (9), the calcium lactate treatment resulted in high drained weights... treatments . . 23 Drained weight response to pH diff'erences 24 Drained weight response to calcium lactate treatments 24 Drained weight response to blanch time dif'ferences . 25 Drained weight response to variety x parboil irteraction 25 10. Drained...

  12. ADVANCED MATERIALS Curriculum Nanomaterials Materials Science I 5 CP Materials Science II 5 CP Lab Materials Science II 5 CP

    E-Print Network [OSTI]

    Pfeifer, Holger

    ADVANCED MATERIALS Curriculum Nanomaterials Materials Science I 5 CP Materials Science II 5 CP Lab Materials Science II 5 CP Computational Methods in Materials Science 4 CP Lab Materials Science I 5 CP Science Chemistry Physics Engineering Nanomaterials Introductory Engineering 5 CP #12;

  13. Degrees in Metallurgy and Materials

    E-Print Network [OSTI]

    Birmingham, University of

    Degrees in Metallurgy and Materials Course outline School of Metallurgy and Materials Materials us? Dr Alessandro Mottura Undergraduate Admissions Tutor for Metallurgy and Materials What difference will you make? #12;Degrees in Metallurgy and Materials Understanding the properties of new materials

  14. Comparing urban solid waste recycling from the viewpoint of urban metabolism based on physical input-output model: A case of Suzhou in China

    SciTech Connect (OSTI)

    Liang Sai, E-mail: liangsai09@gmail.com [School of Environment, State Key Joint Laboratory of Environment Simulation and Pollution Control, Tsinghua University, Beijing 100084 (China); Zhang Tianzhu, E-mail: zhangtz@mail.tsinghua.edu.cn [School of Environment, State Key Joint Laboratory of Environment Simulation and Pollution Control, Tsinghua University, Beijing 100084 (China)

    2012-01-15T23:59:59.000Z

    Highlights: Black-Right-Pointing-Pointer Impacts of solid waste recycling on Suzhou's urban metabolism in 2015 are analyzed. Black-Right-Pointing-Pointer Sludge recycling for biogas is regarded as an accepted method. Black-Right-Pointing-Pointer Technical levels of reusing scrap tires and food wastes should be improved. Black-Right-Pointing-Pointer Other fly ash utilization methods should be exploited. Black-Right-Pointing-Pointer Secondary wastes from reusing food wastes and sludge should be concerned. - Abstract: Investigating impacts of urban solid waste recycling on urban metabolism contributes to sustainable urban solid waste management and urban sustainability. Using a physical input-output model and scenario analysis, urban metabolism of Suzhou in 2015 is predicted and impacts of four categories of solid waste recycling on urban metabolism are illustrated: scrap tire recycling, food waste recycling, fly ash recycling and sludge recycling. Sludge recycling has positive effects on reducing all material flows. Thus, sludge recycling for biogas is regarded as an accepted method. Moreover, technical levels of scrap tire recycling and food waste recycling should be improved to produce positive effects on reducing more material flows. Fly ash recycling for cement production has negative effects on reducing all material flows except solid wastes. Thus, other fly ash utilization methods should be exploited. In addition, the utilization and treatment of secondary wastes from food waste recycling and sludge recycling should be concerned.

  15. Materials Characterization Capabilities at the High Temperature...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lightweighting Materials Materials Characterization Capabilities at the High Temperature Materials Laboratory: Focus Lightweighting Materials 2011 DOE Hydrogen and Fuel Cells...

  16. Acquisition of material properties in production for sheet metal forming processes

    SciTech Connect (OSTI)

    Heingrtner, Jrg; Hora, Pavel [Institute of Virtual Manufacturing, ETH Zurich (Switzerland); Neumann, Anja; Hortig, Dirk [Daimler AG, Sindelfingen (Germany); Rencki, Yasar [Franke Technology Ltd, Aarburg (Switzerland)

    2013-12-16T23:59:59.000Z

    In past work a measurement system for the in-line acquisition of material properties was developed at IVP. This system is based on the non-destructive eddy-current principle. Using this system, a 100% control of material properties of the processed material is possible. The system can be used for ferromagnetic materials like standard steels as well as paramagnetic materials like Aluminum and stainless steel. Used as an in-line measurement system, it can be configured as a stand-alone system to control material properties and sort out inapplicable material or as part of a control system of the forming process. In both cases, the acquired data can be used as input data for numerical simulations, e.g. stochastic simulations based on real world data.

  17. DUSTMS-D: DISPOSAL UNIT SOURCE TERM - MULTIPLE SPECIES - DISTRIBUTED FAILURE DATA INPUT GUIDE.

    SciTech Connect (OSTI)

    SULLIVAN, T.M.

    2006-01-01T23:59:59.000Z

    Performance assessment of a low-level waste (LLW) disposal facility begins with an estimation of the rate at which radionuclides migrate out of the facility (i.e., the source term). The focus of this work is to develop a methodology for calculating the source term. In general, the source term is influenced by the radionuclide inventory, the wasteforms and containers used to dispose of the inventory, and the physical processes that lead to release from the facility (fluid flow, container degradation, wasteform leaching, and radionuclide transport). Many of these physical processes are influenced by the design of the disposal facility (e.g., how the engineered barriers control infiltration of water). The complexity of the problem and the absence of appropriate data prevent development of an entirely mechanistic representation of radionuclide release from a disposal facility. Typically, a number of assumptions, based on knowledge of the disposal system, are used to simplify the problem. This has been done and the resulting models have been incorporated into the computer code DUST-MS (Disposal Unit Source Term-Multiple Species). The DUST-MS computer code is designed to model water flow, container degradation, release of contaminants from the wasteform to the contacting solution and transport through the subsurface media. Water flow through the facility over time is modeled using tabular input. Container degradation models include three types of failure rates: (a) instantaneous (all containers in a control volume fail at once), (b) uniformly distributed failures (containers fail at a linear rate between a specified starting and ending time), and (c) gaussian failure rates (containers fail at a rate determined by a mean failure time, standard deviation and gaussian distribution). Wasteform release models include four release mechanisms: (a) rinse with partitioning (inventory is released instantly upon container failure subject to equilibrium partitioning (sorption) with the waste form), (b) diffusion release.(release from either a cylindrical, spherical, or rectangular wasteform), (c) dissolution release (uniform release over time due to dissolution of the wasteform surface), and (d) solubility limited release. The predicated wasteform releases are corrected for radioactive decay and ingrowth. A unique set of container failure and wasteform release parameters can be specified for each control volume with a container. Contaminant transport is modeled through a finite-difference solution of the advective transport equation with sources (wasteform release and ingrowth) and radioactive decay. Although DUST-MS simulates one-dimensional transport, it can be used to simulate migration down to an aquifer and then transport in the aquifer by running the code twice. A special subroutine allows the flux into the aquifer from the first simulation to be input as the flux at the upstream boundary in the aquifer. This document presents the models used to calculate release from a disposal facility, verification of the model, and instructions on the use of the DUST-MS code. In addition to DUST-MS, a preprocessor, DUSTINMS, which helps the code user create input decks for DUST-MS and a post-processor, GRAFMS, which takes selected output files and plots them on the computer terminal have been written. Use of these codes is also described. In using DUST-MS, as with all computer models, the validity of the predictions relies heavily on the validity of the input parameters. Often, the largest uncertainties arise from uncertainty in the input parameters. Therefore, it is crucial to document and support the use of these parameters. The DUST-MS code, because of its flexibility and ability to compute release rates quickly, is extremely useful for screening to determine the radionuclide released at the highest rate, parameter sensitivity analysis and, with proper choice of the input parameters, provide upper bounds to release rates.

  18. ATS materials/manufacturing

    SciTech Connect (OSTI)

    Karnitz, M.A.; Wright, I.G.; Ferber, M.K. [and others

    1997-11-01T23:59:59.000Z

    The Materials/Manufacturing Technology subelement is a part of the base technology portion of the Advanced Turbine Systems (ATS) Program. The work in this subelement is being performed predominantly by industry with assistance from national laboratories and universities. The projects in this subelement are aimed toward hastening the incorporation of new materials and components in gas turbines. Work is currently ongoing on thermal barrier coatings (TBCs), the scale-up of single crystal airfoil manufacturing technologies, materials characterization, and technology information exchange. This paper presents highlights of the activities during the past year. 12 refs., 24 figs., 4 tabs.

  19. Electrically conductive composite material

    DOE Patents [OSTI]

    Clough, R.L.; Sylwester, A.P.

    1988-06-20T23:59:59.000Z

    An electrically conductive composite material is disclosed which comprises a conductive open-celled, low density, microcellular carbon foam filled with a non-conductive polymer or resin. The composite material is prepared in a two-step process consisting of first preparing the microcellular carbon foam from a carbonizable polymer or copolymer using a phase separation process, then filling the carbon foam with the desired non-conductive polymer or resin. The electrically conductive composites of the present invention has a uniform and consistent pattern of filler distribution, and as a result is superior over prior art materials when used in battery components, electrodes, and the like. 2 figs.

  20. Material Challenges and Perspectives

    SciTech Connect (OSTI)

    Choi, Daiwon; Wang, Wei; Yang, Zhenguo

    2011-12-14T23:59:59.000Z

    General history and principals of Li-ion battery, characterization techniques and terminology of its operation will be discussed and explained. Current Li-ion battery applications and comparison to other energy storage and conversion systems will be outlined. Chemistry, material and design of currently commercialized Li-ion batteries will be discussed including various electrode materials for cathodes and anodes. The electrode material candidates and its physical and chemical properties including crystal structure, capacity, cycling stability, cost and safety. Also, current limitations of Li-ion batteries will be discussed.

  1. Electrically conductive composite material

    DOE Patents [OSTI]

    Clough, R.L.; Sylwester, A.P.

    1989-05-23T23:59:59.000Z

    An electrically conductive composite material is disclosed which comprises a conductive open-celled, low density, microcellular carbon foam filled with a non-conductive polymer or resin. The composite material is prepared in a two-step process consisting of first preparing the microcellular carbon foam from a carbonizable polymer or copolymer using a phase separation process, then filling the carbon foam with the desired non-conductive polymer or resin. The electrically conductive composites of the present invention has a uniform and consistent pattern of filler distribution, and as a result is superior over prior art materials when used in battery components, electrodes, and the like. 2 figs.

  2. Electrically conductive composite material

    DOE Patents [OSTI]

    Clough, Roger L. (Albuquerque, NM); Sylwester, Alan P. (Albuquerque, NM)

    1989-01-01T23:59:59.000Z

    An electrically conductive composite material is disclosed which comprises a conductive open-celled, low density, microcellular carbon foam filled with a non-conductive polymer or resin. The composite material is prepared in a two-step process consisting of first preparing the microcellular carbon foam from a carbonizable polymer or copolymer using a phase separation process, then filling the carbon foam with the desired non-conductive polymer or resin. The electrically conductive composites of the present invention has a uniform and consistant pattern of filler distribution, and as a result is superior over prior art materials when used in battery components, electrodes, and the like.

  3. RADIOACTIVE MATERIALS SENSORS

    SciTech Connect (OSTI)

    Mayo, Robert M.; Stephens, Daniel L.

    2009-09-15T23:59:59.000Z

    Providing technical means to detect, prevent, and reverse the threat of potential illicit use of radiological or nuclear materials is among the greatest challenges facing contemporary science and technology. In this short article, we provide brief description and overview of the state-of-the-art in sensor development for the detection of radioactive materials, as well as an identification of the technical needs and challenges faced by the detection community. We begin with a discussion of gamma-ray and neutron detectors and spectrometers, followed by a description of imaging sensors, active interrogation, and materials development, before closing with a brief discussion of the unique challenges posed in fielding sensor systems.

  4. Fissile material detector

    DOE Patents [OSTI]

    Ivanov, Alexander I. (Dubna, RU); Lushchikov, Vladislav I. (Dubna, RU); Shabalin, Eugeny P. (Dubna, RU); Maznyy, Nikita G. (Dubna, RU); Khvastunov, Michael M. (Dubna, RU); Rowland, Mark (Alamo, CA)

    2002-01-01T23:59:59.000Z

    A detector for fissile materials which provides for integrity monitoring of fissile materials and can be used for nondestructive assay to confirm the presence of a stable content of fissile material in items. The detector has a sample cavity large enough to enable assay of large items of arbitrary configuration, utilizes neutron sources fabricated in spatially extended shapes mounted on the endcaps of the sample cavity, incorporates a thermal neutron filter insert with reflector properties, and the electronics module includes a neutron multiplicity coincidence counter.

  5. Critical Materials Hub

    Broader source: Energy.gov [DOE]

    Critical materials, including some rare earth elements that possess unique magnetic, catalytic, and luminescent properties, are key resources needed to manufacture products for the clean energy economy. These materials are so critical to the technologies that enable wind turbines, solar panels, electric vehicles, and energy-efficient lighting that DOE's 2010 and 2011 Critical Materials Strategy reported that supply challenges for five rare earth metalsdysprosium, neodymium, terbium, europium, and yttriumcould affect clean energy technology deployment in the coming years.1, 2

  6. Procedure for developing biological input for the design, location, or modification of water-intake structures

    SciTech Connect (OSTI)

    Neitzel, D.A.; McKenzie, D.H.

    1981-12-01T23:59:59.000Z

    To minimize adverse impact on aquatic ecosystems resulting from the operation of water intake structures, design engineers must have relevant information on the behavior, physiology and ecology of local fish and shellfish. Identification of stimulus/response relationships and the environmental factors that influence them is the first step in incorporating biological information in the design, location or modification of water intake structures. A procedure is presented in this document for providing biological input to engineers who are designing, locating or modifying a water intake structure. The authors discuss sources of stimuli at water intakes, historical approaches in assessing potential/actual impact and review biological information needed for intake design.

  7. Development of the seismic input for use in the seismic safety margins research program

    SciTech Connect (OSTI)

    Bernreuter, D.L.; Chung, D.H.

    1980-01-29T23:59:59.000Z

    This paper briefly outlines the overall systems approach being developed for the Seismic Safety Margins Research Program. The unique features of the approach being taken to reduce the uncertainty in the seismic input for this program are discussed. These unique features will include extensive use of expert opinion, earthquake rupture simulation studies and the way in which the seismic hazard is incorporated into the overall systems analysis. Some very preliminary results are also given for the Zion site which is the power plant chosen for analysis in Phase I of the program.

  8. RELAP5/MOD3 code manual: User`s guide and input requirements. Volume 2

    SciTech Connect (OSTI)

    NONE

    1995-08-01T23:59:59.000Z

    The RELAP5 code has been developed for best estimate transient simulation of light water reactor coolant systems during postulated accidents. The code models the coupled behavior of the reactor coolant system and the core for loss-of-coolant accidents, and operational transients, such as anticipated transient without scram, loss of offsite power, loss of feedwater, and loss of flow. A generic modeling approach is used that permits simulating a variety of thermal hydraulic systems. Control system and secondary system components are included to permit modeling of plant controls, turbines, condensers, and secondary feedwater systems. Volume II contains detailed instructions for code application and input data preparation.

  9. Cascade design of single input single output systems using H? and quantitative feedback theory methodologies

    E-Print Network [OSTI]

    Lal, Mayank

    2005-02-17T23:59:59.000Z

    . It is shown using QFT methodology that there aren?t any advantages gained in the low frequencies with the use of cascaded design. In effect it is concluded that if the design is properly executed a single loop controller closed from the output to the input... In the fourth part the H? methodology was used to design a two loop control structure. The idea was to compare this design to the QFT design. It was seen that H? generated redundant controllers and pre filters...

  10. Table A50. Total Inputs of Energy for Heat, Power, and Electricity Generatio

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are nowTotal" (Percent) Type: Sulfur Content API Gravity Period: Monthly Annual Download Series History Download Series History Definitions, SourcesType"A50. Total Inputs

  11. U.S. Natural Gas Input Supplemental Fuels (Million Cubic Feet)

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5 Tables July 1996 Energy Information Administration Office ofthroughYear JanYear Jan Feb MarFields34Decade Year-0 Year-1 Year-2Input

  12. Table A45. Total Inputs of Energy for Heat, Power, and Electricity Generation

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are nowTotal" (Percent) Type: Sulfur Content API GravityDakota" "Fuel, quality", 2013,Iowa"Dakota" ,"FullWestQuantity of2" "Total Inputs

  13. Final Version 01.28.2009 Discovery Group White Paper

    E-Print Network [OSTI]

    strategy for the College of Agriculture so your input is critical as these ideas and suggestions as sources of energy and raw materials for manufacturing. Agriculture will need to produce has included a webbased survey, a series of meetings with a faculty committee, and input from others

  14. UCSD Input for DIII-D Quarterly Report: July, 2003 Experimental Boundary Physics

    E-Print Network [OSTI]

    California at San Diego, University of

    , and a multi-material sample exposed to 22 discharges in USN configuration to study erosion of various ITER-relevant materials under simulated first wall conditions. An experiment involving exposure of a liquid Lithium sample capable of wetting liquid lithium to an insulating boron nitride DiMES cap, based on experience gained

  15. Nanostructured Materials for Energy Generation and Storage

    E-Print Network [OSTI]

    Khan, Javed Miller

    2012-01-01T23:59:59.000Z

    xi Material CharacterizationThermoelectric Materials . . . . . . . . Graphene-Like5 Nanostructured Materials for Electrochemical Energy

  16. Materials at LANL

    SciTech Connect (OSTI)

    Taylor, Antoinette J [Los Alamos National Laboratory

    2010-01-01T23:59:59.000Z

    Exploring the physics, chemistry, and metallurgy of materials has been a primary focus of Los Alamos National Laboratory since its inception. In the early 1940s, very little was known or understood about plutonium, uranium, or their alloys. In addition, several new ionic, polymeric, and energetic materials with unique properties were needed in the development of nuclear weapons. As the Laboratory has evolved, and as missions in threat reduction, defense, energy, and meeting other emerging national challenges have been added, the role of materials science has expanded with the need for continued improvement in our understanding of the structure and properties of materials and in our ability to synthesize and process materials with unique characteristics. Materials science and engineering continues to be central to this Laboratory's success, and the materials capability truly spans the entire laboratory - touching upon numerous divisions and directorates and estimated to include >1/3 of the lab's technical staff. In 2006, Los Alamos and LANS LLC began to redefine our future, building upon the laboratory's established strengths and promoted by strongly interdependent science, technology and engineering capabilities. Eight Grand Challenges for Science were set forth as a technical framework for bridging across capabilities. Two of these grand challenges, Fundamental Understanding of Materials and Superconductivity and Actinide Science. were clearly materials-centric and were led out of our organizations. The complexity of these scientific thrusts was fleshed out through workshops involving cross-disciplinary teams. These teams refined the grand challenge concepts into actionable descriptions to be used as guidance for decisions like our LDRD strategic investment strategies and as the organizing basis for our external review process. In 2008, the Laboratory published 'Building the Future of Los Alamos. The Premier National Security Science Laboratory,' LA-UR-08-1541. This document introduced three strategic thrusts that crosscut the Grand Challenges and define future laboratory directions and facilities: (1) Information Science and Technology enabl ing integrative and predictive science; (2) Experimental science focused on materials for the future; and (3) Fundamental forensic science for nuclear, biological, and chemical threats. The next step for the Materials Capability was to develop a strategic plan for the second thrust, Materials for the Future. within the context of a capabilities-based Laboratory. This work has involved extending our 2006-2007 Grand Challenge workshops, integrating materials fundamental challenges into the MaRIE definition, and capitalizing on the emerging materials-centric national security missions. Strategic planning workshops with broad leadership and staff participation continued to hone our scientific directions and reinforce our strength through interdependence. By the Fall of 2008, these workshops promoted our primary strength as the delivery of Predictive Performance in applications where Extreme Environments dominate and where the discovery of Emergent Phenomena is a critical. These planning efforts were put into action through the development of our FY10 LDRD Strategic Investment Plan where the Materials Category was defined to incorporate three central thrusts: Prediction and Control of Performance, Extreme Environments and Emergent Phenomena. As with all strategic planning, much of the benefit is in the dialogue and cross-fertilization of ideas that occurs during the process. By winter of 2008/09, there was much agreement on the evolving focus for the Materials Strategy, but there was some lingering doubt over Prediction and Control of Performance as one of the three central thrusts, because it overarches all we do and is, truly, the end goal for materials science and engineering. Therefore, we elevated this thrust within the overarching vision/mission and introduce the concept of Defects and Interfaces as a central thrust that had previously been implied but not clearly articulated.

  17. Management of Nuclear Materials

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1994-05-26T23:59:59.000Z

    To establish requirements and procedures for the management of nuclear materials within the Department of Energy (DOE). Cancels DOE 5660.1A. Canceled by DOE O 410.2.

  18. Nuclear Material Packaging Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-03-07T23:59:59.000Z

    The manual provides detailed packaging requirements for protecting workers from exposure to nuclear materials stored outside of an approved engineered contamination barrier. No cancellation. Certified 11-18-10.

  19. Reversible hydrogen storage materials

    DOE Patents [OSTI]

    Ritter, James A. (Lexington, SC); Wang, Tao (Columbia, SC); Ebner, Armin D. (Lexington, SC); Holland, Charles E. (Cayce, SC)

    2012-04-10T23:59:59.000Z

    In accordance with the present disclosure, a process for synthesis of a complex hydride material for hydrogen storage is provided. The process includes mixing a borohydride with at least one additive agent and at least one catalyst and heating the mixture at a temperature of less than about 600.degree. C. and a pressure of H.sub.2 gas to form a complex hydride material. The complex hydride material comprises MAl.sub.xB.sub.yH.sub.z, wherein M is an alkali metal or group IIA metal, Al is the element aluminum, x is any number from 0 to 1, B is the element boron, y is a number from 0 to 13, and z is a number from 4 to 57 with the additive agent and catalyst still being present. The complex hydride material is capable of cyclic dehydrogenation and rehydrogenation and has a hydrogen capacity of at least about 4 weight percent.

  20. Nuclear material operations manual

    SciTech Connect (OSTI)

    Tyler, R.P.

    1981-02-01T23:59:59.000Z

    This manual provides a concise and comprehensive documentation of the operating procedures currently practiced at Sandia National Laboratories with regard to the management, control, and accountability of nuclear materials. The manual is divided into chapters which are devoted to the separate functions performed in nuclear material operations-management, control, accountability, and safeguards, and the final two chapters comprise a document which is also issued separately to provide a summary of the information and operating procedures relevant to custodians and users of radioactive and nuclear materials. The manual also contains samples of the forms utilized in carrying out nuclear material activities. To enhance the clarity of presentation, operating procedures are presented in the form of playscripts in which the responsible organizations and necessary actions are clearly delineated in a chronological fashion from the initiation of a transaction to its completion.