Powered by Deep Web Technologies
Note: This page contains sample records for the topic "rating cancel rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Rate Schedules  

Broader source: Energy.gov [DOE]

One of the major responsibilities of Southeastern is to design, formulate, and justify rate schedules. Repayment studies prepared by the agency determine revenue requirements and appropriate rate...

2

Energy Rating  

E-Print Network [OSTI]

Consistent, accurate, and uniform ratings based on a single statewide rating scale Reasonable estimates of potential utility bill savings and reliable recommendations on cost-effective measures to improve energy efficiency Training and certification procedures for home raters and quality assurance procedures to promote accurate ratings and to protect consumers Labeling procedures that will meet the needs of home buyers, homeowners, renters, the real estate industry, and mortgage lenders with an interest in home energy ratings

Cabec Conference; Rashid Mir P. E

2009-01-01T23:59:59.000Z

3

Rate schedule  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298, andEpidermal Growth Factor. |INCIDENCET3PACI-T3Rate

4

Chlorite Dissolution Rates  

SciTech Connect (OSTI)

Spreadsheets provides measured chlorite rate data from 100 to 300C at elevated CO2. Spreadsheet includes derived rate equation.

Carroll, Susan

2013-07-01T23:59:59.000Z

5

Chlorite Dissolution Rates  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Spreadsheets provides measured chlorite rate data from 100 to 300C at elevated CO2. Spreadsheet includes derived rate equation.

Carroll, Susan

6

The Interest Rate Conundrum  

E-Print Network [OSTI]

Flows and US Interest Rates,” NBER Working Paper No 12560. [Working Paper # 2008 -03 The Interest Rate Conundrum Roger

Craine, Roger; Martin, Vance L.

2009-01-01T23:59:59.000Z

7

Effective Rate Period  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of the FY Mid-Year Change 10012013 - 03312014 04012014 - 09302014 Power Rates Annual Revenue Requirement Rate Schedule Power Revenue Requirement 73,441,557...

8

Heart Rate Artifact Suppression.  

E-Print Network [OSTI]

??Motion artifact strongly corrupts heart rate measurements in current pulse oximetry systems. In many, almost any motion will greatly diminish the system’s ability to extract… (more)

Dickson, Christopher

2012-01-01T23:59:59.000Z

9

Residential Solar Valuation Rates  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Residential Solar Valuation Rates Karl R. Rbago Rbago Energy LLC 1 The Ideal Residential Solar Tariff Fair to the utility and non-solar customers Fair compensation to...

10

Effective Rate Period  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

charges or credits associated with the creation, termination, or modification to any tariff, contract, or rate schedule accepted or approved by the Federal Energy Regulatory...

11

LCC Guidance Rates  

Broader source: Energy.gov [DOE]

Notepad text file provides the LCC guidance rates in a numbered format for the various regions throughout the U.S.

12

Previous Power Rates (rates/current)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home DesignPresentations Presentations SortConferences PreviousRates

13

Power Rate Cases (pbl/rates)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006PhotovoltaicSeptember 22,ReactorAbout Power > FinancialPowerRates

14

Power Rates Announcements (pbl/rates)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006PhotovoltaicSeptember 22,ReactorAbout Power > FinancialPowerRates

15

Rates Meetings and Workshops (pbl/rates)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298, andEpidermal Growth Factor. |INCIDENCET3PACI-T3Rate

16

On Thermonuclear Reaction Rates  

E-Print Network [OSTI]

Nuclear reactions govern major aspects of the chemical evolution od galaxies and stars. Analytic study of the reaction rates and reaction probability integrals is attempted here. Exact expressions for the reaction rates and reaction probability integrals for nuclear reactions in the case of nonresonant, modified nonresonant, screened nonresonant and resonant cases are given. These are expressed in terms of H-functions, G-functions and in computable series forms. Computational aspects are also discussed.

H. J. Haubold; A. M. Mathai

1996-12-02T23:59:59.000Z

17

Rates and Repayment Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298, andEpidermal Growth Factor.Tariff Rates FY 2015 Rates

18

Graduate Kentucky Metropolitan Rate Application  

E-Print Network [OSTI]

Graduate Kentucky Metropolitan Rate Application REGISTRAR'S OFFICE University of Cincinnati PO Box Kentucky counties are able to attend UC at an established metropolitan tuition rate. Non Kentucky residency, these students are not eligible for the graduate metropolitan rate. Kentucky counties

Franco, John

19

Rates and Repayment Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromising Science for1PrincipalRare Iron Oxide in AncientRates and

20

Rates and Repayment Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromising Science for1PrincipalRare Iron Oxide in AncientRates

Note: This page contains sample records for the topic "rating cancel rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Rating Agency Reports  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298, andEpidermal Growth Factor.Tariff Rates FY 2015

22

BCP Annual Rate Process  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAboutScience Program CumulusA t i o nLiquids Reserve2015 BCP Annual Rate

23

Energy Management Through Innovative Rates  

E-Print Network [OSTI]

of energy efficiency in the industrial sector and specific rate design alternatives for doing so....

Williams, M. L.

1982-01-01T23:59:59.000Z

24

National Utility Rate Database: Preprint  

SciTech Connect (OSTI)

When modeling solar energy technologies and other distributed energy systems, using high-quality expansive electricity rates is essential. The National Renewable Energy Laboratory (NREL) developed a utility rate platform for entering, storing, updating, and accessing a large collection of utility rates from around the United States. This utility rate platform lives on the Open Energy Information (OpenEI) website, OpenEI.org, allowing the data to be programmatically accessed from a web browser, using an application programming interface (API). The semantic-based utility rate platform currently has record of 1,885 utility rates and covers over 85% of the electricity consumption in the United States.

Ong, S.; McKeel, R.

2012-08-01T23:59:59.000Z

25

2007 Wholesale Power Rate Schedules : 2007 General Rate Schedule Provisions.  

SciTech Connect (OSTI)

This schedule is available for the contract purchase of Firm Power to be used within the Pacific Northwest (PNW). Priority Firm (PF) Power may be purchased by public bodies, cooperatives, and Federal agencies for resale to ultimate consumers, for direct consumption, and for Construction, Test and Start-Up, and Station Service. Rates in this schedule are in effect beginning October 1, 2006, and apply to purchases under requirements Firm Power sales contracts for a three-year period. The Slice Product is only available for public bodies and cooperatives who have signed Slice contracts for the FY 2002-2011 period. Utilities participating in the Residential Exchange Program (REP) under Section 5(c) of the Northwest Power Act may purchase Priority Firm Power pursuant to the Residential Exchange Program. Rates under contracts that contain charges that escalate based on BPA's Priority Firm Power rates shall be based on the three-year rates listed in this rate schedule in addition to applicable transmission charges. This rate schedule supersedes the PF-02 rate schedule, which went into effect October 1, 2001. Sales under the PF-07 rate schedule are subject to BPA's 2007 General Rate Schedule Provisions (2007 GRSPs). Products available under this rate schedule are defined in the 2007 GRSPs. For sales under this rate schedule, bills shall be rendered and payments due pursuant to BPA's 2007 GRSPs and billing process.

United States. Bonneville Power Administration.

2006-11-01T23:59:59.000Z

26

The Inverted Block Rate:The Inverted Block Rate: An Alternative to Flat Rate BillingAn Alternative to Flat Rate Billing  

E-Print Network [OSTI]

The Inverted Block Rate:The Inverted Block Rate: An Alternative to Flat Rate BillingAn Alternative;Inverted Block RateInverted Block Rate 22 IntroductionIntroduction ·· Modern societies rely on electrical collectionMetering and Rate Models facilitate collection #12;Inverted Block RateInverted Block Rate 33 Rate

Hughes, Larry

27

Asymptotic Cellular Growth Rate as the Effective Information Utilization Rate  

E-Print Network [OSTI]

We study the average asymptotic growth rate of cells in randomly fluctuating environments. Using a game-theoretic perspective, we show that any response strategy has an asymptotic growth rate, which is the sum of: (i) the maximal growth rate at the worst possible distribution of environments, (ii) relative information between the actual distribution of environments to the worst one, and (iii) information utilization rate which is the information rate of the sensory devices minus the "information dissipation rate", the amount of information not utilized by the cell for growth. In non-stationary environments, the optimal strategy is the time average of the instantaneous optimal strategy and the optimal switching times are evenly spaced in the statistical (Fisher) metric.

Pugatch, Rami; Tlusty, Tsvi

2013-01-01T23:59:59.000Z

28

Sustainable Building Rating Systems Summary  

SciTech Connect (OSTI)

The purpose of this document is to offer information that could be used to compare and contrast sustainable building rating systems.

Fowler, Kimberly M.; Rauch, Emily M.

2006-07-01T23:59:59.000Z

29

Strain rate sensitive constitutive equations  

E-Print Network [OSTI]

1 Computed Constants For Far'ous . Baterials 47 LIST OF FIGURFS Pace Figure I Comparison of Rate Data For Commercially Pure Aluminum Figure 2 Dynamic Loading Regimes 17 Figure 3 Yield Criteria 32 Figure 4 Uni-axial Stress-Strain Rate...

Nelson, Charles Edward

1971-01-01T23:59:59.000Z

30

RECYCLING RATE STUDY Prepared by  

E-Print Network [OSTI]

NATIONAL RECYCLING RATE STUDY Prepared by: Smith, Bucklin and Associates, Inc. Market Research and Statistics Division Chicago, Illinois July 2003 PRINTED ON RECYCLED PAPER #12;BCI RECYCLING RATE STUDY TABLE ....................................................................................................1 II. METHODOLOGY A. Total Pounds of Lead Recycled from Batteries

Laughlin, Robert B.

31

Innovative Rates Program. Final report  

SciTech Connect (OSTI)

Title II of the Energy Conservation and Production Act (ECPA) as amended by the Public Utility Regulatory Policies Act (PURPA) provided financial assistance to state utility regulatory commissions, nonregulated electric utilities, and the Tennessee Valley Authority through the Innovative Rates Program. The financial assistance was to be used to plan or carry out electric utility regulatory rate reform initiatives relating to innovative rate structures that encourage conservation of energy, electric utility efficiency and reduced costs, and equitable rates to consumers. The Federal and local objectives of the project are described. Activities planned and accomplishments are summarized for the following: project management, data collection, utility bill evaluation, billing enclosure/mailing evaluation, media program evaluation, display evaluation, rate study sessions evaluation, speakers bureau evaluation, and individual customer contacts. A timetable/milestone chart and financial information are included. (MHR)

Not Available

1982-06-21T23:59:59.000Z

32

RATES  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromising Science for1 20115, 2001 Media Contact: Rick FordMarketing

33

RATES  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromising Science for1 20115, 2001 Media Contact: Rick FordMarketing

34

RATES  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298, and 323 K.Office ofMay 8, 2012IndustrialRAPIDDRATES

35

Supernova rates and stellar populations  

E-Print Network [OSTI]

We discuss the results about the nature of type Ia Supernovae that can be derived by studying their rates in different stellar populations. While the evolution of SN photometry and spectra can constrain the explosion mechanism, the SN rate depends on the progenitor system. We review the current available data on rates as a function of parent galaxy color, morphology, star formation rate, radio luminosity and environment. By studying the variation of the rates with the color of the parent galaxy, a strong evidence was established that type Ia SNe come from both young and old stars. The dependence of the rates with the radio power of the parent galaxy is best reproduced by a bimodal distribution of delay time between the formation of the progenitor and its explosion as a SN. Cluster early-type galaxies show higher type Ia SN rate with respect to field galaxies, and this effect can be due either to traces of young stars or to differences in the delay time distribution.

F. Mannucci

2007-08-03T23:59:59.000Z

36

High repetition rate fiber lasers  

E-Print Network [OSTI]

This thesis reports work in high repetition rate femtosecond fiber lasers. Driven by the applications including optical arbitrary waveform generation, high speed optical sampling, frequency metrology, and timing and frequency ...

Chen, Jian, Ph. D. Massachusetts Institute of Technology

2009-01-01T23:59:59.000Z

37

Electric Rate Alternatives to Cogeneration  

E-Print Network [OSTI]

"ELECTRIC RATE ALTERNATIVES TO COGENERATION" K. R. SANDBERG, JR. INDUSTRIAL ACCOUNTS MANAGER - TEXAS GULF STATES UTILITIES COMPANY BEAUMONT, TEXAS ABSTRACT This paper discusses electric rate slternatives to cogeneration for the industrisl... PERSPECTIVE Gulf States Utilities was incorporated in 1925 and is primarily in the business of generating. transmitting and distributing electricity to 555.000 customers in southeast Texas and south Louisiana. The service area extends 350 miles westward...

Sandberg, K. R. Jr.

38

October 2001 - September 2006 Wholesale Power Rates (rates/previous)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 The 2002 Wholesale Power Rate Schedules (base rates) for the FY

39

October 2002 - March 2003 Power Rates (rates/previous)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 The 2002 Wholesale Power Rate Schedules (base rates) for the FY6 A2

40

October 2003 - March 2004 Power Rates (rates/previous)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 The 2002 Wholesale Power Rate Schedules (base rates) for the FY6

Note: This page contains sample records for the topic "rating cancel rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

October 2004 - March 2005 Power Rates (rates/previous)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 The 2002 Wholesale Power Rate Schedules (base rates) for the FY64 -

42

October 2005 - March 2006 Power Rates (rates/previous)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 The 2002 Wholesale Power Rate Schedules (base rates) for the FY64

43

LEED for Homes Rating System affordablemarket rate multi-family  

E-Print Network [OSTI]

for Future Comfort Load Reduction 50% 60%20% 30% 40% Energy Savings Cost System Intensive Building Envelo pe;Rating System www.usgbc.org/leed/homes #12;LEED for Homes Project Checklist or Scorecard #12;LEED for Homes Project Checklist or Scorecard #12;How the Credit Structure Works Credit #2: Landscaping Intent

Zaferatos, Nicholas C.

44

Incentive Rates- At What Cost?  

E-Print Network [OSTI]

with interruptible services. Instead, I filed "ISB" which was priced slightly above the marginal fuel cost on a time of use basis. Many of the periods of the year the first year that I proposed that rate, the cost of interruptible would have been higher than... forms centers on four issues; cost scope of the topic, so let me describe what I feel based pricing, discrimination, competition between is an incentive rate. My view is likely to strike utilities, and effectiveness. You've already some of you...

Schaeffer, S. C.

45

Direct estimation of decoherence rates  

E-Print Network [OSTI]

The decoherence rate is a nonlinear channel parameter that describes quantitatively the decay of the off-diagonal elements of a density operator in the decoherence basis. We address the question of how to experimentally access such a nonlinear parameter directly without the need of complete process tomography. In particular, we design a simple experiment working with two copies of the channel, in which the registered mean value of a two-valued measurement directly determines the value of the average decoherence rate. No prior knowledge of the decoherence basis is required.

Vladimír Bužek; Peter Rapcan; Jochen Rau; Mario Ziman

2012-07-30T23:59:59.000Z

46

Fast repetition rate (FRR) flasher  

DOE Patents [OSTI]

A fast repetition rate (FRR) flasher is described suitable for high flash photolysis including kinetic chemical and biological analysis. The flasher includes a power supply, a discharge capacitor operably connected to be charged by the power supply, and a flash lamp for producing a series of flashes in response to discharge of the discharge capacitor. A triggering circuit operably connected to the flash lamp initially ionizes the flash lamp. A current switch is operably connected between the flash lamp and the discharge capacitor. The current switch has at least one insulated gate bipolar transistor for switching current that is operable to initiate a controllable discharge of the discharge capacitor through the flash lamp. Control means connected to the current switch for controlling the rate of discharge of the discharge capacitor thereby to effectively keep the flash lamp in an ionized state between successive discharges of the discharge capacitor. Advantageously, the control means is operable to discharge the discharge capacitor at a rate greater than 10,000 Hz and even up to a rate greater than about 250,000 Hz. 14 figs.

Kolber, Z.; Falkowski, P.

1997-02-11T23:59:59.000Z

47

Instability statistics and mixing rates  

E-Print Network [OSTI]

We claim that looking at probability distributions of \\emph{finite time} largest Lyapunov exponents, and more precisely studying their large deviation properties, yields an extremely powerful technique to get quantitative estimates of polynomial decay rates of time correlations and Poincar\\'e recurrences in the -quite delicate- case of dynamical systems with weak chaotic properties.

Roberto Artuso; Cesar Manchein

2009-10-20T23:59:59.000Z

48

Undergraduate Kentucky Metropolitan Rate Application  

E-Print Network [OSTI]

Undergraduate Kentucky Metropolitan Rate Application REGISTRAR'S OFFICE University of Cincinnati PO@ucmail.uc.edu Undergraduate residents of specified counties in Kentucky, who are matriculated in degree or certificate requirement to establish Kentucky residency, these students are not eligible for the undergraduate

Franco, John

49

Interviewer's ratings of personality: can these ratings predict job performance?  

E-Print Network [OSTI]

; Goldberg, 1993a; Guastello, 1993; McCrae k Costa, 1985; McCrae & John, 1992) has been about the validity of the five-factor model as a measure of personality; in other words, does the model truly capture all traits of personality? The five-factor model...; Goldberg, 1981; McCrae & Costa, 1987; McCrae & John, 1992; Peabody & Goldberg, 1989). Tupes and Christal (1958, 1992) were the first to look at peer ratings of personality in a variety of samples. Although these samples varied in length and kind...

Archuleta, Kathryn Diane

2012-06-07T23:59:59.000Z

50

WP-07 Rate Case Workshops (rates/meetings)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism inS-4500IIVasudhaSurface.Laboratory30,WP-07 power rates On July

51

Property:OpenEI/UtilityRate/DemandRateStructure/Tier3Rate | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County,ContAddr2NumberOfPrograms Jump to:URIInformation Rate

52

Property:OpenEI/UtilityRate/EnergyRateStructure/Tier5Rate | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscotInformation Max Jump to: navigation, search This is aInformation Rate

53

Property:OpenEI/UtilityRate/EnergyRateStructure/Tier6Rate | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscotInformation Max Jump to: navigation, search This isInformation Rate Jump

54

Upper Great Plains Rates information  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption by sectorlongUpdates by Diane Johnson Email Alerts SubscribeRates

55

Rate Adjustments and Public Involvement  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298, andEpidermal Growth Factor. | EMSLusingRate

56

Previous Announcements (rates/fc)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16 FOR IMMEDIATEPreviewing the 2011 RenewableRates >

57

Property:OpenEI/UtilityRate/DemandRateStructure/Tier1Rate | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County,ContAddr2NumberOfPrograms Jump to:URI JumpEnergyInformation Rate

58

Property:OpenEI/UtilityRate/DemandRateStructure/Tier2Rate | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County,ContAddr2NumberOfPrograms Jump to:URIInformation Rate Jump to:

59

Property:OpenEI/UtilityRate/DemandRateStructure/Tier4Rate | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County,ContAddr2NumberOfPrograms Jump to:URIInformationInformation Rate

60

7, 29612989, 2007 Predicting arene rate  

E-Print Network [OSTI]

software or computing power. Measured gas-phase rate coefficients for the reaction of aromatic hydrocarbons

Boyer, Edmond

Note: This page contains sample records for the topic "rating cancel rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Combined Retrieval, Microphysical Retrievals and Heating Rates  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Microphysical retrievals and heating rates from the AMIE/Gan deployment using the PNNL Combined Retrieval.

Feng, Zhe

62

Composite Fringe Benefit Rates Nancy R. Lewis  

E-Print Network [OSTI]

January 1, 2015 Retirement Eligible FY 2014-15 Rate FY 2015-16 Rate FY 2016-17 Rate B Healthcomp Faculty of Research #12;New Rates · Provided by the Budget Office for use when planning proposal budgets for contract and grants · Effective for use in proposals submitted to sponsors January 1, 2015 and thereafter · Title

Wood, Marcelo A.

63

Combined Retrieval, Microphysical Retrievals and Heating Rates  

SciTech Connect (OSTI)

Microphysical retrievals and heating rates from the AMIE/Gan deployment using the PNNL Combined Retrieval.

Feng, Zhe

2013-02-22T23:59:59.000Z

64

Home Energy Ratings and Building Performance  

E-Print Network [OSTI]

climate as they affect the rating score of a proposed or completed structure. The rating is used to determine the most cost effective mechanical systems, building envelope design including window and door types, effect of various roofing materials...

Gardner, J.C.

65

Smokeless Control of Flare Steam Flow Rate  

E-Print Network [OSTI]

measurement of mass flow rate of flare gas, in spite of the hostile environment. Its use for initiating control of flare steam flow rate and the addition of molecular weight compensation, using specific gravity (relative density) measurement to achieve...

Agar, J.; Balls, B. W.

1979-01-01T23:59:59.000Z

66

2012 Wholesale Power and Transmission Rate  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

the meaning given such term in section 3.3.5. "COU Parties' PF Rate" means any BPA wholesale power rate for service to COUs' "general requirements" (as defined in section...

67

Kiwifruitsize influences softening rate during storage  

E-Print Network [OSTI]

fruit size and the rate of softening under air and CA conditions will help cold storage managerssafelyparts per billion induce rapid kiwifruit softening during cold storage, we investigated the rate

Crisosto, Carlos H.

68

ON THE RELATIONSHIP BETWEEN CONVERGENCE RATES OF ...  

E-Print Network [OSTI]

Q-rates in terms of the di erential properties of v and in terms of the ... schemes of this kind is to assure that they converge at a provably fast rate to a point.

69

Energy Efficiency Interest Rate Reduction Program  

Broader source: Energy.gov [DOE]

The Alaska Housing Finance Corporation (AHFC) offers interest rate reductions to home buyers purchasing new and existing homes with 5 Star and 5 Star Plus energy ratings. All homes constructed on...

70

Variable-Rate State Gasoline Taxes  

E-Print Network [OSTI]

J Bradshaw, "SLate ’F~es’ Gasoline Tax So ~t Wdl Rise," TheVarlable-Rate State Gasoline Taxers Jeffrey Ang-Olson MartinVariable-Rate State Gasoline Taxes Jeffrey Ang-Olson

Ang-Olson, Jeffrey; Wachs, Martin; Taylor, Brian D.

2000-01-01T23:59:59.000Z

71

Spontaneous Emission Rate Enhancement Using Optical Antennas  

E-Print Network [OSTI]

of  Spontaneous  Emission  in  a  Semiconductor  nanoLED,”  emission  rate  enhancement  using  the  Fluorescent  Emission  by  Lattice   Resonances  in  

Kumar, Nikhil

2013-01-01T23:59:59.000Z

72

Optimization Online - Faster convergence rates of relaxed ...  

E-Print Network [OSTI]

Jul 19, 2014 ... Faster convergence rates of relaxed Peaceman-Rachford and ADMM under regularity assumptions. Damek Davis (damek ***at*** ...

Damek Davis

2014-07-19T23:59:59.000Z

73

2007 Wholesale Power Rate Case Initial Proposal : 2007 Wholesale Power Rate Schedule and General Rate Schedule Provisions.  

SciTech Connect (OSTI)

This schedule is available for the contract purchase of Firm Power to be used within the Pacific Northwest (PNW). Priority Firm (PF) Power may be purchased by public bodies, cooperatives, and Federal agencies for resale to ultimate consumers, for direct consumption, and for Construction, Test and Start-Up, and Station Service. Rates in this schedule are in effect beginning October 1, 2006, and apply to purchases under requirements Firm Power sales contracts for a three-year period. The Slice Product is only available for public bodies and cooperatives who have signed Slice contracts for the FY 2002-2011 period. Utilities participating in the Residential Exchange Program (REP) under Section 5(c) of the Northwest Power Act may purchase Priority Firm Power pursuant to the Residential Exchange Program. Rates under contracts that contain charges that escalate based on BPA's Priority Firm Power rates shall be based on the three-year rates listed in this rate schedule in addition to applicable transmission charges. This rate schedule supersedes the PF-02 rate schedule, which went into effect October 1, 2001. Sales under the PF-07 rate schedule are subject to BPA's 2007 General Rate Schedule Provisions (2007 GRSPs). Products available under this rate schedule are defined in the 2007 GRSPs. For sales under this rate schedule, bills shall be rendered and payments due pursuant to BPA's 2007 GRSPs and billing process.

United States. Bonneville Power Administration.

2005-11-01T23:59:59.000Z

74

WAGES, FLEXIBLE EXCHANGE RATES, AND MACROECONOMIC POLICY*  

E-Print Network [OSTI]

WAGES, FLEXIBLE EXCHANGE RATES, AND MACROECONOMIC POLICY* JEFFREY SACHS In an open economy with a floaLing exchange rate, the efficacy of fiscal and monetary policy depends fundamentally on the wage rate depreciation, while fiscal expansion has no output effect. These results hold only when real wages

75

AUXILIARY RATE CALCULATION The Budget Office  

E-Print Network [OSTI]

AUXILIARY RATE CALCULATION The Budget Office #12;AGENDA Guiding Principles Rate Proposal Building Office supplies for budget manager reconciliationOffice supplies for budget manager reconciliation: Equipment Compensated Leave #12;CALCULATING A RATE Budgeted Expenses Budgeted Usage BaseBudgeted Usage Base

Weston, Ken

76

West Virginia University -Main Campus Student Retention and Graduation Rates  

E-Print Network [OSTI]

West Virginia University - Main Campus Student Retention and Graduation Rates First-Time, Full ---------------------------------------------------------------------Continuation Rates and Cumulative Graduation Rates

Mohaghegh, Shahab

77

FITCH RATES ENERGY NORTHWEST (WA) ELECTRIC REV REF BONDS 'AA...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

FITCH RATES ENERGY NORTHWEST (WA) ELECTRIC REV REF BONDS 'AA'; OUTLOOK STABLE Fitch Ratings-Austin-08 April 2015: Fitch Ratings assigns 'AA' ratings to the following Energy...

78

HEART RATE AS A MONITOR FOR METABOLIC RATE IN CAPTIVE JUVENILE STELLER SEA LIONS (EUMETOPIAS JUBATUS)  

E-Print Network [OSTI]

HEART RATE AS A MONITOR FOR METABOLIC RATE IN CAPTIVE JUVENILE STELLER SEA LIONS (EUMETOPIAS COLUMBIA 0Jan M. Mcl'hee, 2001 #12;ABSTRACT The potential use of heart rate to monitor energy expenditure a relationship exists between heart rate @I) and oxygen consumption ( ~ 0 ~ )in captive sea lions while swimming

79

An Examination of Harvest Rates and Brood-Take Rates as  

E-Print Network [OSTI]

An Examination of Harvest Rates and Brood-Take Rates as Management Strategies to Assist Recovery of Resource Management Project Number: 546 Title of Project: An Examination of Harvest Rates and Brood-Take Rates as Management Strategies to Assist Recovery of Cowichan River Chinook Salmon Examining Committee

80

Photovoltaic Degradation Rates -- An Analytical Review  

SciTech Connect (OSTI)

As photovoltaic penetration of the power grid increases, accurate predictions of return on investment require accurate prediction of decreased power output over time. Degradation rates must be known in order to predict power delivery. This article reviews degradation rates of flat-plate terrestrial modules and systems reported in published literature from field testing throughout the last 40 years. Nearly 2000 degradation rates, measured on individual modules or entire systems, have been assembled from the literature, showing a median value of 0.5%/year. The review consists of three parts: a brief historical outline, an analytical summary of degradation rates, and a detailed bibliography partitioned by technology.

Jordan, D. C.; Kurtz, S. R.

2012-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "rating cancel rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Confronting the Graduation Rate Crisis in Texas  

E-Print Network [OSTI]

Guide to Graduation Policy and Rates, Editorial Projects inthe Graduation Crisis. Bethesda, MD: Editorial Projects inthe Graduation Crisis. Bethesda, MD: Editorial Projects in

Losen, Daniel; Orfield, Gary; Balfanz, Robert

2006-01-01T23:59:59.000Z

82

CM-1-H Wholesale Power Rate Schedule  

Broader source: Energy.gov [DOE]

Availability:This rate schedule shall be available to the South Mississippi Electric Power Association, Municipal Energy Agency of Mississippi, and Mississippi Delta Energy Agency (hereinafter...

83

Convergence Rates with Inexact Nonexpansive Operators  

E-Print Network [OSTI]

Apr 18, 2014 ... Abstract: In this paper, we present a convergence rate analysis for the inexact Krasnosel'ski{\\u{\\i}}-Mann iteration built from nonexpansive ...

Jingwei Liang

2014-04-18T23:59:59.000Z

84

Method of controlling fusion reaction rates  

DOE Patents [OSTI]

This invention relates to a method of controlling the reaction rates in a nuclear fusion reactor; and more particularly, to the use of polarized nuclear fuel.

Kulsrud, R.M.; Furth, H.P.; Valeo, E.J.; Goldhaber, M.

1983-05-09T23:59:59.000Z

85

2006 Texas High Plains Cotton Variety Ratings  

E-Print Network [OSTI]

Average Incidence of Wilt Date of Wilt Rating Earth 0.0 0.0 Sept. 8 Brownfield 5.5 1.8 Aug. 28 Petersburg

Mukhtar, Saqib

86

Home energy rating systems: Program descriptions  

SciTech Connect (OSTI)

This report contains the descriptions of home energy rating and labelling programs (HERS) that were surveyed in January 1986 as part of a national evaluation of HERS.

Vine, E.; Barnes, B.K.; Ritschard, R.

1987-02-01T23:59:59.000Z

87

Ramp-rate sensitivity of SSC dipole magnet prototypes  

SciTech Connect (OSTI)

One of the major achievements of the magnet R&D program for the Superconducting Super Collider (SSC) is the fabrication and test of a series of 20 5-cm aperture, 15-m long dipole magnet prototypes. The ramp rate sensitivity of these magnets appears to fall in at least two categories that can be correlated to the manufacturer and production batch of the strands used for the inner-coil cables. The first category, referred to as type-A, is characterized by a strong quench current degradation at high ramp rates, usually accompanied by large distortions of the multipole fields and large energy losses. The second category, referred to as type-B, is characterized by a sudden drop of quench current at low ramp rates, followed by a much milder degradation at larger rates. The multipole fields of the type-B magnets show little ramp-rate sensitivity, and the energy losses are smaller than for the type-A magnets. The behavior of the Type-A magnets can be explained in terms of inter-strand eddy currents arising from low and non-uniform resistances at the crossovers between the strands of the two-layer Rutherford-type cable. Anomalies in the transport-current repartition among the cable strands are suggested as a possible cause for the type-B behavior. The origins of these anomalies have not yet been clearly identified. The SSC project was canceled by decision of the United States Congress on October 21, 1994.

Devred, A.; Ogitsu, T.

1994-07-01T23:59:59.000Z

88

Cadmium Biosorption Rate in Protonated Sargassum Biomass  

E-Print Network [OSTI]

Cadmium Biosorption Rate in Protonated Sargassum Biomass J I N B A I Y A N G A N D B O H U M I L V Sargassum fluitans biomass was accompanied by the release of hydrogen protons from the biomass. The uptake the overall biosorption rate of cadmium ions in flat seaweed biomass particles. The overall biosorption

Volesky, Bohumil

89

Foolproof completions for high rate production wells  

E-Print Network [OSTI]

gravel pack (GP) and high rate water pack (HRWP) completions over high-permeability fracturing (HPF), known in the vernacular as a frac&pack (FP) for very high rate wells. While a properly designed GP completion may prevent sand production, it does...

Tosic, Slavko

2008-10-10T23:59:59.000Z

90

Foolproof completions for high rate production wells  

E-Print Network [OSTI]

gravel pack (GP) and high rate water pack (HRWP) completions over high-permeability fracturing (HPF), known in the vernacular as a frac&pack (FP) for very high rate wells. While a properly designed GP completion may prevent sand production, it does...

Tosic, Slavko

2009-05-15T23:59:59.000Z

91

False Discovery Rates John D. Storey  

E-Print Network [OSTI]

positives. The false discovery rate is designed to quantify this type of trade-off, making it particularly Hypothesis Testing In hypothesis testing, statistical significance is typically based on calculations involving p-values and Type I error rates. A p-value calculated from a single statistical hypothesis test

Storey, John D.

92

Method of controlling fusion reaction rates  

DOE Patents [OSTI]

A method of controlling the reaction rates of the fuel atoms in a fusion reactor comprises the step of polarizing the nuclei of the fuel atoms in a particular direction relative to the plasma confining magnetic field. Fusion reaction rates can be increased or decreased, and the direction of emission of the reaction products can be controlled, depending on the choice of polarization direction.

Kulsrud, Russell M. (Princeton, NJ); Furth, Harold P. (Princeton, NJ); Valeo, Ernest J. (Princeton Junction, NJ); Goldhaber, Maurice (Bayport, NY)

1988-01-01T23:59:59.000Z

93

Theoretical cosmic Type Ia supernova rates  

E-Print Network [OSTI]

The aim of this work is the computation of the cosmic Type Ia supernova rates at very high redshifts (z>2). We adopt various progenitor models in order to predict the number of explosions in different scenarios for galaxy formation and to check whether it is possible to select the best delay time distribution model, on the basis of the available observations of Type Ia supernovae. We also computed the Type Ia supernova rate in typical elliptical galaxies of different initial luminous masses and the total amount of iron produced by Type Ia supernovae in each case. It emerges that: it is not easy to select the best delay time distribution scenario from the observational data and this is because the cosmic star formation rate dominates over the distribution function of the delay times; the monolithic collapse scenario predicts an increasing trend of the SN Ia rate at high redshifts whereas the predicted rate in the hierarchical scheme drops dramatically at high redshift; for the elliptical galaxies we note that the predicted maximum of the Type Ia supernova rate depends on the initial galactic mass. The maximum occurs earlier (at about 0.3 Gyr) in the most massive ellipticals, as a consequence of downsizing in star formation. We find that different delay time distributions predict different relations between the Type Ia supernova rate per unit mass at the present time and the color of the parent galaxies and that bluer ellipticals present higher supernova Type Ia rates at the present time.

R. Valiante; F. Matteucci; S. Recchi; F. Calura

2009-03-16T23:59:59.000Z

94

Resonances and the thermonuclear reaction rate  

E-Print Network [OSTI]

We present an approximate analytic expression for thermonuclear reaction rate of charged particles when the cross section contains a single narrow or wide resonance described by a Breit-Wigner shape. The resulting expression is uniformly valid as the effective energy and resonance energy coalesce. We use our expressions to calculate the reaction rate for $^{12}$C(p,$\\gamma$)$^{13}$N.

M. S. Hussein; M. Ueda; A. J. Sargeant; M. P. Pato

2003-07-21T23:59:59.000Z

95

Atomic multipole relaxation rates near surfaces  

E-Print Network [OSTI]

The spontaneous relaxation rates for an atom in free space and close to an absorbing surface are calculated to various orders of the electromagnetic multipole expansion. The spontaneous decay rates for dipole, quadrupole and octupole transitions are calculated in terms of their respective primitive electric multipole moments and the magnetic relaxation rate is calculated for the dipole and quadrupole transitions in terms of their respective primitive magnetic multipole moments. The theory of electromagnetic field quantization in magnetoelectric materials is used to derive general expressions for the decay rates in terms of the dyadic Green function. We focus on the decay rates in free space and near an infinite half space. For the decay of atoms near to an absorbing dielectric surface we find a hierarchy of scaling laws depending on the atom-surface distance z.

J. A. Crosse; Stefan Scheel

2010-08-13T23:59:59.000Z

96

Nuclear reaction rates and the primordial nucleosynthesis  

E-Print Network [OSTI]

The theoretical predictions of the primordial abundances of elements in the big-bang nucleosynthesis (BBN) are dominated by uncertainties in the input nuclear reaction rates. We investigate the effect of modifying these reaction rates on light element abundance yields in BBN by replacing the thirty-five reaction rates out of the existing eighty-eight. We have studied these yields as functions of evolution time or temperature. We find that using these new reaction rates results in only a little increase in helium mass fraction over that obtained previously in BBN calculations. This allows insights into the role of the nuclear reaction rates in the setting of the neutron-to-proton ratio during the BBN epoch. We observe that even with considerable nuclear physics uncertainties, most of these nuclear reactions have minimal effect on the standard BBN abundance yields of $^6$Li and $^7$Li.

Abhishek Mishra; D. N. Basu

2011-11-15T23:59:59.000Z

97

THE NOVA RATE IN NGC 2403  

SciTech Connect (OSTI)

A multi-epoch H{alpha} survey of the late-type spiral galaxy NGC 2403 has been completed in order to determine its nova rate. A total of nine nova candidates were discovered in 48 nights of observation with two different telescopes over the period from 2001 February to 2012 April. After making corrections for temporal coverage and spatial completeness, a nova rate of 2.0{sup +0.5} {sub -0.3} yr{sup -1} was determined. This rate corresponds to a luminosity-specific nova rate of 2.5 {+-} 0.7 novae per year per 10{sup 10} L {sub Sun ,K}. This value is consistent with that of the similar Hubble-type galaxy, M33, and is typical of those of other galaxies with measured nova rates, which range from 1 to 3 novae per year per 10{sup 10} L {sub Sun ,K}.

Franck, J. R.; Shafter, A. W. [Department of Astronomy, San Diego State University, San Diego, CA 92182 (United States); Hornoch, K. [Astronomical Institute, Academy of Sciences, CZ-251 65 Ondrejov (Czech Republic); Misselt, K. A. [Steward Observatory, University of Arizona, Tucson, AZ 85721 (United States)

2012-11-20T23:59:59.000Z

98

Merger Rates of Dark-Matter Haloes  

E-Print Network [OSTI]

We derive analytic merger rates for dark-matter haloes within the framework of the Extended Press-Schechter (EPS) formalism. These rates become self-consistent within EPS once we realize that the typical merger in the limit of a small time-step involves more than two progenitors, contrary to the assumption of binary mergers adopted in earlier studies. We present a general method for computing merger rates that span the range of solutions permitted by the EPS conditional mass function, and focus on a specific solution that attempts to match the merger rates in N-body simulations. The corrected EPS merger rates are more accurate than the earlier estimates of Lacey & Cole, by ~20% for major mergers and by up to a factor of ~3 for minor mergers of mass ratio 1:10^4. Based on the revised merger rates, we provide a new algorithm for constructing Monte-Carlo EPS merger trees, that could be useful in Semi-Analytic Modeling. We provide analytic expressions and plot numerical results for several quantities that are very useful in studies of galaxy formation. This includes (a) the rate of mergers of a given mass ratio per given final halo, (b) the fraction of mass added by mergers to a halo, and (c) the rate of mergers per given main progenitor. The creation and destruction rates of haloes serve for a self-consistency check. Our method for computing merger rates can be applied to conditional mass functions beyond EPS, such as those obtained by the ellipsoidal collapse model or extracted from $N$-body simulations.

Eyal Neistein; Avishai Dekel

2008-05-22T23:59:59.000Z

99

Considerations for How to Rate CPV  

SciTech Connect (OSTI)

The concentrator photovoltaic (CPV) industry is introducing multiple products into the marketplace, but, as yet, the; community has not embraced a unified method for assessing a nameplate rating. The choices of whether to use 850,; 900, or 1000 W/m2 for the direct-normal irradiance and whether to link the rating to ambient or cell temperature will; affect how CPV modules are rated and compared with other technologies. This paper explores the qualitative and; quantitative ramifications of these choices using data from two multi-junction CPV modules and two flat-plate; modules.

Kurtz, S.; Miller, M.; Marion, B.; Emery, K.; McConnell, R.; Surendran, S.; Kimber, A.

2011-02-01T23:59:59.000Z

100

Measuring Degradation Rates Without Irradiance Data  

SciTech Connect (OSTI)

A method to report PV system degradation rates without using irradiance data is demonstrated. First, a set of relative degradation rates are determined by comparing daily AC final yields from a group of PV systems relative to the average final yield of all the PV systems. Then, the difference between relative and absolute degradation rates is found from a statistical analysis. This approach is verified by comparing to methods that utilize irradiance data. This approach is significant because PV systems are often deployed without irradiance sensors, so the analysis method described here may enable measurements of degradation using data that were previously thought to be unsuitable for degradation studies.

Pulver, S.; Cormode, D.; Cronin, A.; Jordan, D.; Kurtz, S.; Smith, R.

2011-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "rating cancel rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

2007 Wholesale Power Rate Case Initial Proposal : Section 7(b)(2) Rate Test Study.  

SciTech Connect (OSTI)

Section 7(b)(2) of the Pacific Northwest Electric Power Planning and Conservation Act (Northwest Power Act), 16 U.S.C. {section} 839e(b)(2), directs the Bonneville Power Administration (BPA) to conduct, after July 1, 1985, a comparison of the projected rates to be charged its preference and Federal agency customers for their firm power requirements, over the rate test period plus the ensuing four years, with the costs of power (hereafter called rates) to those customers for the same time period if certain assumptions are made. The effect of this rate test is to protect BPA's preference and Federal agency customers wholesale firm power rates from certain specified costs resulting from provisions of the Northwest Power Act. The rate test can result in a reallocation of costs from the general requirements loads of preference and Federal agency customers to other BPA loads. The rate test involves the projection and comparison of two sets of wholesale power rates for the general requirements loads of BPA's public body, cooperative, and Federal agency customers (7(b)(2) Customers). The two sets of rates are: (1) a set for the test period and the ensuing four years assuming that section 7(b)(2) is not in effect (known as Program Case rates); and (2) a set for the same period taking into account the five assumptions listed in section 7(b)(2), (known as 7(b)(2) Case rates). Certain specified costs allocated pursuant to section 7(g) of the Northwest Power Act are subtracted from the Program Case rates. Next, each nominal rate is discounted to the beginning of the test period of the relevant rate case. The discounted Program Case rates are averaged, as are the 7(b)(2) Case rates. Both averages are rounded to the nearest tenth of a mill for comparison. If the average Program Case rate is greater than the average 7(b)(2) Case rate, the rate test triggers. The difference between the average Program Case rate and the average 7(b)(2) Case rate determines the amount to be reallocated from the 7(b)(2) Customers to other BPA loads in the rate proposal test period.

United States. Bonneville Power Administration.

2005-11-01T23:59:59.000Z

102

2007 Wholesale Power Rate Case Final Proposal : Wholesale Power Rate Development Study.  

SciTech Connect (OSTI)

The Wholesale Power Rate Development Study (WPRDS) serves two primary purposes. It synthesizes information supplied by the other final studies that comprise the BPA rate proposal and shows the actual calculations for BPA's power rates. In addition, the WPRDS is the primary source for certain information used in establishing the power rates. Information developed in the WPRDS includes rate design (including seasonal and diurnal shapes for energy rates, demand, and load variance rates), the risk mitigation tools (Cost Recovery Adjustment Clause (CRAC), along with the [N]ational Marine Fisheries Service [F]ederal Columbia River Power System [B]iological Opinion (NFB) Adjustment, the Emergency NFB Surcharge, and Dividend Distribution Clause (DDC)), development of the Slice rate, and all discounts and other adjustments that are included in the rate schedules and the General Rate Schedule Provisions. The WPRDS also includes the description of the methodology for the Cost of Service Analysis (COSA), and the various rate design steps necessary to establish BPA's power rates. The WPRDS also shows the calculations for inter-business line revenues and expenses, the revenue forecast and, finally, includes a description of all of the rate schedules. The actual rate schedules are shown in ''Administrator's Final Record of Decision (ROD), Appendix A: 2007 Wholesale Power Rate Schedules and General Rate Schedule Provisions, WP-07-A-02''. The WPRDS also includes the Partial Resolution of Issues, shown in Attachment 1 of the ROD. The Partial Resolution of Issues affected many of the features described in this study. These are noted where appropriate.

United States. Bonneville Power Administration.

2006-07-01T23:59:59.000Z

103

2007 Wholesale Power Rate Case Initial Proposal : Wholesale Power Rate Development Study Documentation.  

SciTech Connect (OSTI)

The Documentation for Wholesale Power Rate Development Study (WPRDS) shows the details of the calculation of the proposed rates. It contains the source data, the calculation, and the results. Section 1 contains an overview of the information used and developed in the various models used in the rate development process. Section 2 contains the documentation of the Rate Analysis Model (RAM2007). The RAM2007 is a group of computer applications that performs most of the computations that determine BPA's proposed rates. The output tables of RAM2007 show the source data, calculations (in sequence), and the results (rate charges) of the rate development process. Section 3 provides documentation of revenue forecasts for the 3-year rate test period FY 2007 through FY 2009 at both current and proposed rates and at current rates for the period immediately preceding the rate test period. Section 4 includes supporting data for rate calculations not performed in RAM2007 or revenue analyses. Each section draws data from difference sources and thus tables and/or charts are not always numbered in sequence. For purposes of this document, omitted tables will be listed as such in the Table of Contents.

United States. Bonneville Power Administration

2005-11-01T23:59:59.000Z

104

2007 Wholesale Power Rate Case Final Proposal : Wholesale Power Rate Development Study Documentation, Volume 2.  

SciTech Connect (OSTI)

The Documentation for Wholesale Power Rate Development Study shows the details of the calculation of the proposed rates. It contains the source data, the calculation, and the results. There are 2 Volumes, the first containing Sections 1, 2, and 3; the second containing Section 4 and 3 appendices. Section 1 contains an overview of the information used and developed in the various models used in the rate development process. Section 2 contains the documentation of the Rate Analysis Model (RAM2007). The RAM2007 is a group of computer applications that performs most of the computations that determine BPA's proposed rates. The output tables of RAM2007 show the source data, calculations (in sequence), and the results (rate charges) of the rate development process. Section 3 provides documentation of revenue forecasts for the three-year rate test period FY 2007 through FY 2009 at both current and proposed rates and at current rates for the period immediately preceding the rate test period. Section 4 includes supporting data for rate calculations not performed in RAM2007 or revenue analyses.

United States. Bonneville Power Administration.

2006-07-01T23:59:59.000Z

105

Cooling rate, heating rate, and aging effects in glassy water Nicolas Giovambattista,1  

E-Print Network [OSTI]

be glassified by cooling using hyper- quenching techniques (i.e., with rates of the order of 105 K/s [8Cooling rate, heating rate, and aging effects in glassy water Nicolas Giovambattista,1 H. Eugene of water molecules during the process of generating a glass by cooling, and during the process

Sciortino, Francesco

106

Extended range radiation dose-rate monitor  

DOE Patents [OSTI]

An extended range dose-rate monitor is provided which utilizes the pulse pileup phenomenon that occurs in conventional counting systems to alter the dynamic response of the system to extend the dose-rate counting range. The current pulses from a solid-state detector generated by radiation events are amplified and shaped prior to applying the pulses to the input of a comparator. The comparator generates one logic pulse for each input pulse which exceeds the comparator reference threshold. These pulses are integrated and applied to a meter calibrated to indicate the measured dose-rate in response to the integrator output. A portion of the output signal from the integrator is fed back to vary the comparator reference threshold in proportion to the output count rate to extend the sensitive dynamic detection range by delaying the asymptotic approach of the integrator output toward full scale as measured by the meter.

Valentine, Kenneth H. (Knoxville, TN)

1988-01-01T23:59:59.000Z

107

Historical river flow rates for dose calculations  

SciTech Connect (OSTI)

Annual average river flow rates are required input to the LADTAP Computer Code for calculating offsite doses from liquid releases of radioactive materials to the Savannah River. The source of information on annual river flow rates used in dose calculations varies, depending on whether calculations are for retrospective releases or prospective releases. Examples of these types of releases are: Retrospective - releases from routine operations (annual environmental reports) and short term release incidents that have occurred. Prospective - releases that might be expected in the future from routine or abnormal operation of existing or new facilities (EIS`s, EID`S, SAR`S, etc.). This memorandum provides historical flow rates at the downstream gauging station at Highway 301 for use in retrospective dose calculations and derives flow rate data for the Beaufort-Jasper and Port Wentworth water treatment plants.

Carlton, W.H.

1991-06-10T23:59:59.000Z

108

Extratropical Lapse Rates in Very Hot Climates  

E-Print Network [OSTI]

circulation in progressively warmer climate states. As a tool to assess the stability of the atmosphere, we calculate a thermodynamic variable called saturation potential vorticity (P*), which has the property of being identically zero wherever lapse rates...

Zamora, Ryan Alexander

2013-07-02T23:59:59.000Z

109

Negotiating Rates and Contracts for Qualifying Facilities  

E-Print Network [OSTI]

The implementation of a cogeneration project or other qualifying facility (QF) requires the development of contractual relationships with one or more electric utilities. The relationships may involve the application of existing rates and contracts...

Collier, S. E.

110

PSNC Energy (Gas)- Green Building Rate Discount  

Broader source: Energy.gov [DOE]

This discounted rate is available to commercial customers whose building meets the U.S. Green Building Council’s Leadership in Energy and Environmental Design (LEED) certification or equivalent. To...

111

Dynamic Line Rating: Research and Policy Evaluation  

SciTech Connect (OSTI)

Dynamic Line Rating (DLR) is a smart grid technology that allows the rating of electrical conductors to be increased based on local weather conditions. Overhead lines are conventionally given a conservative rating based on worst case scenarios. We demonstrate that observing the conditions in real time leads to additional capacity and safer operation. This paper provides a report of a pioneering scheme in the United States of America in which DLR has been applied. Thereby, we demonstrate that observing the local weather conditions in real time leads to additional capacity and safer operation. Secondly, we discuss limitations involved. In doing so, we arrive at novel insights which will inform and improve future DLR projects. Third, we provide a policy background and discussion to clarify the technology’s potential and identifies barriers to the imminent adoption of dynamic line rating systems. We provide suggestions for regulatory bodies about possible improvements in policy to encourage adoption of this beneficial technology.

Jake P. Gentle; Kurt S. Myers; Michael R. West

2014-07-01T23:59:59.000Z

112

Data Fusion for Improved Respiration Rate Estimation  

E-Print Network [OSTI]

We present an application of a modified Kalman-Filter (KF) framework for data fusion to the estimation of respiratory rate from multiple physiological sources which is robust to background noise. A novel index of the ...

Nemati, Shamim

113

Rating of Solar Energy Devices (Texas)  

Broader source: Energy.gov [DOE]

The Public Utility Commission has regulatory authority over solar energy devices installed and used in the state of Texas. The Commission can choose to adopt standards pertaining to the rating of...

114

Rainfall-induced Landslide Hazard Rating System  

E-Print Network [OSTI]

This research develops a Landslide Hazard Rating System for the rainfall-induced landslides in the Chenyulan River basin area in central Taiwan. This system is designed to provide a simplified and quick evaluation of the ...

Chen, Yi-Ting, Civ. E., Massachusetts Institute of Technology

2011-01-01T23:59:59.000Z

115

Uncertainty Analysis for Photovoltaic Degradation Rates (Poster)  

SciTech Connect (OSTI)

Dependable and predictable energy production is the key to the long-term success of the PV industry. PV systems show over the lifetime of their exposure a gradual decline that depends on many different factors such as module technology, module type, mounting configuration, climate etc. When degradation rates are determined from continuous data the statistical uncertainty is easily calculated from the regression coefficients. However, total uncertainty that includes measurement uncertainty and instrumentation drift is far more difficult to determine. A Monte Carlo simulation approach was chosen to investigate a comprehensive uncertainty analysis. The most important effect for degradation rates is to avoid instrumentation that changes over time in the field. For instance, a drifting irradiance sensor, which can be achieved through regular calibration, can lead to a substantially erroneous degradation rates. However, the accuracy of the irradiance sensor has negligible impact on degradation rate uncertainty emphasizing that precision (relative accuracy) is more important than absolute accuracy.

Jordan, D.; Kurtz, S.; Hansen, C.

2014-04-01T23:59:59.000Z

116

Rating of Mixed Split Residential Air Conditioners  

E-Print Network [OSTI]

A methodology is presented for rating the performance of mixed, split residential air conditioners. The method accounts for the impact on system performance of the indoor evaporator, expansion device and fan; three major components that are likely...

Domanski, P. A.

1988-01-01T23:59:59.000Z

117

Transition Path Sampling of Water Exchange Rates and Mechanisms...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Path Sampling of Water Exchange Rates and Mechanisms around Aqueous Ions . Transition Path Sampling of Water Exchange Rates and Mechanisms around Aqueous Ions . Abstract: The rates...

118

Contractor Rating and Feedback Systems | Department of Energy  

Energy Savers [EERE]

Contractor Rating and Feedback Systems Contractor Rating and Feedback Systems Better Buildings Residential Workforce Business Partners Peer Exchange Call Series: Contractor Rating...

119

Calibration and Rating of Photovoltaics: Preprint  

SciTech Connect (OSTI)

Rating the performance of photovoltaic (PV) modules is critical to determining the cost per watt, and efficiency is useful to assess the relative progress among PV concepts. Procedures for determining the efficiency for PV technologies from 1-sun to low concentration to high concentration are discussed. We also discuss the state of the art in primary and secondary calibration of PV reference cells used by calibration laboratories around the world. Finally, we consider challenges to rating PV technologies and areas for improvement.

Emery, K.

2012-06-01T23:59:59.000Z

120

Solar Models and NACRE thermonuclear reaction rates  

E-Print Network [OSTI]

Using the most recent updated physics, calibrated solar models have been computed with the new thermonuclear reaction rates of NACRE, the recently available European compilation. Comparisons with models computed with the reaction rates of Caughlan & Fowler (\\cite{cf88}) and of Adelberger et al. (\\cite{a98}) are made for global structure, expected neutrinos fluxes, chemical composition and sound speed profiles, helioseismological properties of p-modes and g-modes.

P. Morel; B. Pichon; J. Provost; G. Berthomieu

1999-07-27T23:59:59.000Z

Note: This page contains sample records for the topic "rating cancel rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Rate allocation in a remote control structure  

E-Print Network [OSTI]

measuzes. The quantized control problem, in general, has vector sources with weighted distortion measures. The rate allocation scheme of Goodman, must therefore be modified to allow for vector sources. Chapter 3 will specifically address the problem... of rate allocation given vector sources and weighted distortion measures' Equations will be derived for the case when the measurements and controls are assumed independent and when they are dependent. k + k P k (a) k/k-1 (b) Fig. 2. DPCM (a...

Meadow, Charles Joe

1984-01-01T23:59:59.000Z

122

Radiation Leukemogenesis at Low Dose Rates  

SciTech Connect (OSTI)

The major goals of this program were to study the efficacy of low dose rate radiation exposures for the induction of acute myeloid leukemia (AML) and to characterize the leukemias that are caused by radiation exposures at low dose rate. An irradiator facility was designed and constructed that allows large numbers of mice to be irradiated at low dose rates for protracted periods (up to their life span). To the best of our knowledge this facility is unique in the US and it was subsequently used to study radioprotectors being developed for radiological defense (PLoS One. 7(3), e33044, 2012) and is currently being used to study the role of genetic background in susceptibility to radiation-induced lung cancer. One result of the irradiation was expected; low dose rate exposures are ineffective in inducing AML. However, another result was completely unexpected; the irradiated mice had a very high incidence of hepatocellular carcinoma (HCC), approximately 50%. It was unexpected because acute exposures are ineffective in increasing HCC incidence above background. This is a potential important finding for setting exposure limits because it supports the concept of an 'inverse dose rate effect' for some tumor types. That is, for the development of some tumor types low dose rate exposures carry greater risks than acute exposures.

Weil, Michael; Ullrich, Robert

2013-09-25T23:59:59.000Z

123

Ratios of heavy hadron semileptonic decay rates  

E-Print Network [OSTI]

Ratios of charmed meson and baryon semileptonic decay rates appear to be satisfactorily described by considering only the lowest-lying (S-wave) hadronic final states and assuming the kinematic factor describing phase space suppression is the same as that for free quarks. For example, the rate for $D_s$ semileptonic decay is known to be $(17.0 \\pm 5.3)%$ lower than those for $D^0$ or $D^+$, and the model accounts for this difference. When applied to hadrons containing $b$ quarks, this method implies that the $B_s$ semileptonic decay rate is about 1% higher than that of the nonstrange $B$ mesons. This small difference thus suggests surprisingly good local quark-hadron duality for $B$ semileptonic decays, complementing the expectation based on inclusive quark-hadron duality that these differences in rates should not exceed a few tenths of a percent. For $\\Lambda_b$ semileptonic decay, however, the inclusive rate is predicted to be about 13% greater than that of the nonstrange $B$ mesons. This value, representing a considerable departure from a calculation using a heavy quark expansion, is close to the corresponding experimental ratio $\\Gamma(\\Lambda_b)/ \\bar \\Gamma(B) = 1.13 \\pm 0.03$ of total decay rates.

Michael Gronau; Jonathan L. Rosner

2010-12-27T23:59:59.000Z

124

Short GRBs: Rates and luminosity function implications  

E-Print Network [OSTI]

We compare the luminosity function and rate inferred from the BATSE short hard bursts (SHBs) peak flux distribution with the redshift and luminosity distributions of SHBs observed by Swift/HETE II. The Swift/HETE II SHB sample is incompatible with SHB population that follows the star formation rate. However, it is compatible with a distribution of delay times after the SFR. This would be the case if SHBs are associated with the mergers of double neutron star (DNS) systems. DNS may be ``primordial'' or can form dynamically by binary exchange interaction in globular clusters during core collapse. The implied SHB rates that we find range from \\sim 8 to \\sim 30h_(70)^3 Gpc^(-3)yr^(-1). This rate is a much higher than what was previously estimated and, when beaming is taken into account, it is comparable to the rate of neutron star mergers estimated from statistics of binary pulsars. If GRBs are produced in mergers the implied rate practically guarantees detection by LIGO II and possibly even by LIGO I.

Dafne Guetta

2006-10-13T23:59:59.000Z

125

2007 Wholesale Power Rate Case Final Proposal : Section 7(b)(2) Rate Test Study and Documentation.  

SciTech Connect (OSTI)

Section 7(b)(2) of the Pacific Northwest Electric Power Planning and Conservation Act (Northwest Power Act), 16 U.S.C. {section} 839e(b)(2), directs the Bonneville Power Administration (BPA) to conduct, after July 1, 1985, a comparison of the projected rates to be charged its preference and Federal agency customers for their firm power requirements, over the rate test period plus the ensuing 4 years, with the costs of power (hereafter called rates) to those customers for the same time period if certain assumptions are made. The effect of this rate test is to protect BPA's preference and Federal agency customers wholesale firm power rates from certain specified costs resulting from certain provisions of the Northwest Power Act. The rate test can result in a reallocation of costs from the general requirements loads of preference and Federal agency customers to other BPA loads. The rate test involves the projection and comparison of two sets of wholesale power rates for the general requirement loads of BPA's public body, cooperative, and Federal agency customers (collectively, the 7(b)(2) Customers). The two sets of rates are: (1) a set for the test period and the ensuing four years assuming that Section 7(b)(2) is not in effect (known as Program Case rates); and (2) a set for the same period taking into account the five assumptions listed in section 7(b)(2) (known as 7(b)(2) Case rates). Certain specified costs allocated pursuant to section 7(g) of the Northwest Power Act are subtracted from the Program Case rates. Next, each nominal rate is discounted to the beginning of the test period of the relevant rate case. The discounted Program Case rates are averaged, as are the 7(b)(2) Case rates. Both averages are rounded to the nearest tenth of a mill for comparison. If the average of the Program Case rates is greater than the average of the 7(b)(2) Case rates, the rate test triggers. The difference between the average of the Program Case rates and the average of the 7(b)(2) Case rates determines the amount to be reallocated from the 7(b)(2) Customers to other BPA loads in the rate test period. The purpose of this Study is to describe the application of the ''Section 7(b)(2) Implementation Methodology (Implementation Methodology)'' and the results of such application. The accompanying Section 7(b)(2) Rate Test Study Documentation, WP-07-FS-BPA-06A, contains the documentation of the computer models and data used to perform the 7(b)(2) rate test. This Study is organized into three major sections. The first section provides an introduction to the study, as well as a summary of the section ''7(b)(2) Legal Interpretation and Implementation Methodology''. The second section describes the methodology used in conducting the rate test. It provides a discussion of the calculations performed to project the two sets of power rates that are compared in the rate test. The third section presents a summary of the results of the rate test for the WP-07 Final Rate Proposal.

United States. Bonneville Power Administration.

2006-07-01T23:59:59.000Z

126

FITCH RATES PORT OF MORROW (OR) TRANSMISSION FACILITIES REV BONDS...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

FITCH RATES PORT OF MORROW (OR) TRANSMISSION FACILITIES REV BONDS 'AA'; OUTLOOK STABLE Fitch Ratings-Austin-24 November 2014: Fitch Ratings assigns 'AA' ratings to the Port of...

127

Critical reaction rates in hypersonic combustion chemistry  

SciTech Connect (OSTI)

High Mach number flight requires that the scramjet propulsion system operate at a relatively low static inlet pressure and a high inlet temperature. These two constraints can lead to extremely high temperatures in the combustor, yielding high densities of radical species and correspondingly poor chemical combustion efficiency. As the temperature drops in the nozzle expansion, recombination of these excess radicals can produce more product species, higher heat yield, and potentially more thrust. The extent to which the chemical efficiency can be enhanced in the nozzle expansion depends directly on the rate of the radical recombination reactions. A comprehensive assessment of the important chemical processes and an experimental validation of the critical rate parameters is therefore required if accurate predictions of scramjet performance are to be obtained. This report covers the identification of critical reactions, and the critical reaction rates in hypersonic combustion chemistry. 4 refs., 2 figs.

Oldenborg, R.C.; Harradine, D.M.; Loge, G.W.; Lyman, J.L.; Schott, G.L.; Winn, K.R.

1989-01-01T23:59:59.000Z

128

Relativistic QRPA calculation of muon capture rates  

E-Print Network [OSTI]

The relativistic proton-neutron quasiparticle random phase approximation (PN-RQRPA) is applied in the calculation of total muon capture rates on a large set of nuclei from $^{12}$C to $^{244}$Pu, for which experimental values are available. The microscopic theoretical framework is based on the Relativistic Hartree-Bogoliubov (RHB) model for the nuclear ground state, and transitions to excited states are calculated using the PN-RQRPA. The calculation is fully consistent, i.e., the same interactions are used both in the RHB equations that determine the quasiparticle basis, and in the matrix equations of the PN-RQRPA. The calculated capture rates are sensitive to the in-medium quenching of the axial-vector coupling constant. By reducing this constant from its free-nucleon value $g_A = 1.262$ by 10% for all multipole transitions, the calculation reproduces the experimental muon capture rates to better than 10% accuracy.

T. Marketin; N. Paar; T. Niksic; D. Vretenar

2009-03-30T23:59:59.000Z

129

Analytical Improvements in PV Degradation Rate Determination  

SciTech Connect (OSTI)

As photovoltaic (PV) penetration of the power grid increases, it becomes vital to know how decreased power output may affect cost over time. In order to predict power delivery, the decline or degradation rates must be determined accurately. For non-spectrally corrected data several complete seasonal cycles (typically 3-5 years) are required to obtain reasonably accurate degradation rates. In a rapidly evolving industry such a time span is often unacceptable and the need exists to determine degradation rates accurately in a shorter period of time. Occurrence of outliers and data shifts are two examples of analytical problems leading to greater uncertainty and therefore to longer observation times. In this paper we compare three methodologies of data analysis for robustness in the presence of outliers, data shifts and shorter measurement time periods.

Jordan, D. C.; Kurtz, S. R.

2011-02-01T23:59:59.000Z

130

Achievable Qubit Rates for Quantum Information Wires  

E-Print Network [OSTI]

Suppose Alice and Bob have access to two separated regions, respectively, of a system of electrons moving in the presence of a regular one-dimensional lattice of binding atoms. We consider the problem of communicating as much quantum information, as measured by the qubit rate, through this quantum information wire as possible. We describe a protocol whereby Alice and Bob can achieve a qubit rate for these systems which is proportional to N^(-1/3) qubits per unit time, where N is the number of lattice sites. Our protocol also functions equally in the presence of interactions modelled via the t-J and Hubbard models.

Hulya Yadsan-Appleby; Tobias J. Osborne

2011-02-15T23:59:59.000Z

131

Neutrino Event Rates from Gamma Ray Bursts  

E-Print Network [OSTI]

We recalculate the diffuse flux of high energy neutrinos produced by Gamma Ray Bursts (GRB) in the relativistic fireball model. Although we confirm that the average single burst produces only ~10^{-2} high energy neutrino events in a detector with 1 km^2 effective area, i.e. about 10 events per year, we show that the observed rate is dominated by burst-to-burst fluctuations which are very large. We find event rates that are expected to be larger by one order of magnitude, likely more, which are dominated by a few very bright bursts. This greatly simplifies their detection.

F. Halzen; D. W. Hooper

1999-10-08T23:59:59.000Z

132

What Is the Right Rate? Loan Rates and Demand | Department of...  

Broader source: Energy.gov (indexed) [DOE]

Neighborhood Program Financing Peer Exchange Call: "What is the Right Rate?" call slides and discussion summary, December 1, 2011. Call Slides and Discussion Summary More Documents...

133

Heart Rate Variability Malvin Carl Teich  

E-Print Network [OSTI]

Heart Rate Variability Malvin Carl Teich Boston University and Columbia University http, Grasmere, UK, 2005 #12;CONGESTIVE HEART FAILURE INABILITY OF HEART TO INCREASE CARDIAC OUTPUT IN PROPORTION of breath Swelling in legs General fatigue and weakness Clinical diagnostics: Ascultate heart Carotid pulse

Teich, Malvin C.

134

Tier 2 Vintage Rate Workshop II  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

I N I S T R A T I O N Proposed Access to Market-based Vintage Rate in FY 2014 Guaranteed: Load Following customer with <1 aMW of forecast Short-Term service in FY 2014: NA Load...

135

High rate pulse processing algorithms for microcalorimeters  

SciTech Connect (OSTI)

It has been demonstrated that microcalorimeter spectrometers based on superconducting transition-edge-sensor can readily achieve sub-100 eV energy resolution near 100 keV. However, the active volume of a single microcalorimeter has to be small to maintain good energy resolution, and pulse decay times are normally in the order of milliseconds due to slow thermal relaxation. Consequently, spectrometers are typically built with an array of microcalorimeters to increase detection efficiency and count rate. Large arrays, however, require as much pulse processing as possible to be performed at the front end of the readout electronics to avoid transferring large amounts of waveform data to a host computer for processing. In this paper, they present digital filtering algorithms for processing microcalorimeter pulses in real time at high count rates. The goal for these algorithms, which are being implemented in the readout electronics that they are also currently developing, is to achieve sufficiently good energy resolution for most applications while being (a) simple enough to be implemented in the readout electronics and (b) capable of processing overlapping pulses and thus achieving much higher output count rates than the rates that existing algorithms are currently achieving. Details of these algorithms are presented, and their performance was compared to that of the 'optimal filter' that is the dominant pulse processing algorithm in the cryogenic-detector community.

Rabin, Michael [Los Alamos National Laboratory; Hoover, Andrew S [Los Alamos National Laboratory; Bacrania, Mnesh K [Los Alamos National Laboratory; Tan, Hui [XIA-LLC; Breus, Dimitry [XIA-LLC; Henning, Wolfgang [XIA-LLC; Sabourov, Konstantin [XIA-LLC; Collins, Jeff [XAI-LLC; Warburton, William K [XIA-LLC; Dorise, Bertrand [NIST; Ullom, Joel N [NIST; [NON LANL

2009-01-01T23:59:59.000Z

136

COMMODITY PRICE VOLATILITY ACROSS EXCHANGE RATE REGIMES  

E-Print Network [OSTI]

1 COMMODITY PRICE VOLATILITY ACROSS EXCHANGE RATE REGIMES John T. Cuddington* and Hong Liang** March 10, 2003 ABSTRACT This paper documents a new "stylized fact" regarding the relative price 1880 to 1996, this key relative price among two categories of tradable goods is shown to exhibit

137

Implications of Strong-Rate-Weakening Friction  

E-Print Network [OSTI]

Implications of Strong-Rate- Weakening Friction for the Length-Scale Dependence of the Strength · Rapid transitions between high static friction and very low dynamic friction · Leads to slip-pulse rupture · Slip pulses are extremely localized and have strong positive feedback between friction and slip

Greer, Julia R.

138

Heart Physiology Lab Part 1: Pulse Rate  

E-Print Network [OSTI]

Heart Physiology Lab Part 1: Pulse Rate Measure your pulse in each of the following conditions (in in the class. You may use Table 1 in the Heart Physiology Worksheet for this, if you wish. Once you have all of the class averages for each measurement. You may use Graph 1 in the Heart Physiology Worksheet for this

Loughry, Jim

139

Optimizing bit hydraulics increases penetration rate  

SciTech Connect (OSTI)

At some point, rate of penetration depends as much or more on hydraulics as on bit weight and rotary speed. An easy-to-follow graphical technique shows how to maximize ROP at the rig by finding the optimum pressure drop through the bit and the highest possible crossflow velocity.

Robinson, L.

1982-07-01T23:59:59.000Z

140

High temperature electrochemical corrosion rate probes  

SciTech Connect (OSTI)

Corrosion occurs in the high temperature sections of energy production plants due to a number of factors: ash deposition, coal composition, thermal gradients, and low NOx conditions, among others. Electrochemical corrosion rate (ECR) probes have been shown to operate in high temperature gaseous environments that are similar to those found in fossil fuel combustors. ECR probes are rarely used in energy production plants at the present time, but if they were more fully understood, corrosion could become a process variable at the control of plant operators. Research is being conducted to understand the nature of these probes. Factors being considered are values selected for the Stern-Geary constant, the effect of internal corrosion, and the presence of conductive corrosion scales and ash deposits. The nature of ECR probes will be explored in a number of different atmospheres and with different electrolytes (ash and corrosion product). Corrosion rates measured using an electrochemical multi-technique capabilities instrument will be compared to those measured using the linear polarization resistance (LPR) technique. In future experiments, electrochemical corrosion rates will be compared to penetration corrosion rates determined using optical profilometry measurements.

Bullard, Sophie J.; Covino, Bernard S., Jr.; Holcomb, Gordon R.; Ziomek-Moroz, M.

2005-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "rating cancel rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Prediction of Thermonuclear Reaction Rates in Astrophysics  

E-Print Network [OSTI]

Recent improvements and remaining problems in the prediction of thermonuclear rates are reviewed. The main emphasis is on statistical model calculations, but the challenge to include direct reactions close to the driplines is also briefly addressed. Further theoretical as well as experimental investigations are motivated.

T. Rauscher

1998-10-15T23:59:59.000Z

142

Electric germs Source: scenta Rate this item  

E-Print Network [OSTI]

Electric germs Source: scenta Rate this item People in remote areas could benefit from fuel cells that contain bacteria that grows prolifically on the graphite anodes of fuel cells and can conduct electricity that isolating a bacterium generated pow er in fuel cells efficiently. Geobacter sulfurreducens is bacteria

Lovley, Derek

143

Improving energy efficiency via probabilistic rate combination in 802.11 multi-rate wireless networks  

E-Print Network [OSTI]

transmission. An alternative way to conserve energy is to apply power control [1­4]. A wireless node is allowedImproving energy efficiency via probabilistic rate combination in 802.11 multi-rate wireless in revised form 20 January 2009 Accepted 27 January 2009 Available online 6 February 2009 Keywords: Energy

Lui, John C.S.

144

Muon capture rates within the projected QRPA  

E-Print Network [OSTI]

The conservation of the number of particles within the QRPA plays an important role in the evaluation muon capture rates in all light nuclei with A \\precsim 30 . The violation of the CVC by the Coulomb field in this mass region is of minor importance, but this effect could be quite relevant for medium and heavy nuclei studied previously. The extreme sensitivity of the muon capture rates on the 'pp' coupling strength in nuclei with large neutron excess when described within the QRPA is pointed out. We reckon that the comparison between theory and data for the inclusive muon capture is not a fully satisfactory test on the nuclear model that is used. The exclusive muon transitions are much more robust for such a purpose.

Danilo Sande Santos; Arturo R. Samana; Francisco Krmpoti?; Alejandro J. Dimarco

2012-03-03T23:59:59.000Z

145

Thermal dilepton rates from quenched lattice QCD  

E-Print Network [OSTI]

We present new lattice results on the continuum extrapolation of the vector current correlation function. Lattice calculations have been carried out in the deconfined phase at a temperature of 1.1 Tc, extending our previous results at 1.45 Tc, utilizing quenched non-perturbatively clover-improved Wilson fermions and light quark masses. A systematic analysis on multiple lattice spacings allows to perform the continuum limit of the correlation function and to extract spectral properties in the continuum limit. Our current analysis suggests the results for the electrical conductivity are proportional to the temperature and the thermal dilepton rates in the quark gluon plasma are comparable for both temperatures. Preliminary results of the continuum extrapolated correlation function at finite momenta, which relates to thermal photon rates, are also presented.

H. -T. Ding; A. Francis; O. Kaczmarek; F. Karsch; E. Laermann; S. Mukherjee; M. Müller; W. Soeldner

2013-01-30T23:59:59.000Z

146

IN-SERVICE LOAD & RESISTANCE FACTOR RATING METHOD FOR BRIDGES  

E-Print Network [OSTI]

Stress Rating method (noted ASR in the following), Load Factor Rating method (noted LFR in the followingIN-SERVICE LOAD & RESISTANCE FACTOR RATING METHOD FOR BRIDGES Degang Li1 , Baidurya Bhattacharya2 are evaluated using allowable stress and load factor rating methods. Load rating made in these traditional

Bhattacharya, Baidurya

147

UK now claims world's top discovery rate  

SciTech Connect (OSTI)

UK explorers are a bit more cheerful these days even though no one has discovered a giant field or anything elephant-sized. The reason is a benign tax regime and a growing confidence among industry explorers. This last has resulted in discovery of many smaller fields - particularly gas, some potentially commercial. It is claimed that the UK's discovery rate is now the highest in the world.

Not Available

1985-05-01T23:59:59.000Z

148

Energy loss rate in disordered quantum well  

SciTech Connect (OSTI)

We report the effect of dynamically screened deformation potential on the electron energy loss rate in disordered semiconductor quantum well. Interaction of confined electrons with bulk acoustic phonons has been considered in the deformation coupling. The study concludes that the dynamically screened deformation potential coupling plays a significant role as it substantially affects the power dependency of electron relaxation on temperature and mean free path.

Tripathi, P.; Ashraf, S. S. Z. [Centre of Excellence in Nanomaterials, Faculty of Engineering and Technology, Aligarh Muslim University, Aligarh-202002 (India); Hasan, S. T. [Physics Department, Faculty of Science, The M.S. University of Baroda, Vadodara-390002 (India); Sharma, A. C. [Physics Department, Sibli National College, Azamgarh-276128 (India)

2014-04-24T23:59:59.000Z

149

Subsurface heaters with low sulfidation rates  

DOE Patents [OSTI]

A system for heating a hydrocarbon containing formation includes a heater having an elongated ferromagnetic metal heater section. The heater is located in an opening in a formation. The heater section is configured to heat the hydrocarbon containing formation. The exposed ferromagnetic metal has a sulfidation rate that goes down with increasing temperature of the heater, when the heater is in a selected temperature range.

John, Randy Carl; Vinegar, Harold J

2013-12-10T23:59:59.000Z

150

Intraclass Price Elasticity & Electric Rate Design  

E-Print Network [OSTI]

INTRACLASS PRICE ELASTICITY &ELECTRIC RATE DESIGN KEVIN E. GRESHAM Senior Research Analyst Houston Lighting & Power Company Houston, Texas ABSTRACT PRICE ELASTICITY Electric ~ate design relies on cost incur rance for pricing and pricing... industries are already affecting electric utilities. Cogeneration is one example of competition which effects electric utilities. Utilities now have a competing source of generation which often causes load and revenue losses. Competition has specifically...

Gresham, K. E.

151

Decoherence rates for Galilean covariant dynamics  

E-Print Network [OSTI]

We introduce a measure of decoherence for a class of density operators. For Gaussian density operators in dimension one it coincides with an index used by Morikawa (1990). Spatial decoherence rates are derived for three large classes of the Galilean covariant quantum semigroups introduced by Holevo. We also characterize the relaxation to a Gaussian state for these dynamics and give a theorem for the convergence of the Wigner function to the probability distribution of the classical analog of the process.

Jeremy Clark

2008-04-02T23:59:59.000Z

152

STELLAR ENCOUNTER RATE IN GALACTIC GLOBULAR CLUSTERS  

SciTech Connect (OSTI)

The high stellar densities in the cores of globular clusters cause significant stellar interactions. These stellar interactions can produce close binary mass-transferring systems involving compact objects and their progeny, such as X-ray binaries and radio millisecond pulsars. Comparing the numbers of these systems and interaction rates in different clusters drives our understanding of how cluster parameters affect the production of close binaries. In this paper we estimate stellar encounter rates ({Gamma}) for 124 Galactic globular clusters based on observational data as opposed to the methods previously employed, which assumed 'King-model' profiles for all clusters. By deprojecting cluster surface brightness profiles to estimate luminosity density profiles, we treat 'King-model' and 'core-collapsed' clusters in the same way. In addition, we use Monte Carlo simulations to investigate the effects of uncertainties in various observational parameters (distance, reddening, surface brightness) on {Gamma}, producing the first catalog of globular cluster stellar encounter rates with estimated errors. Comparing our results with published observations of likely products of stellar interactions (numbers of X-ray binaries, numbers of radio millisecond pulsars, and {gamma}-ray luminosity) we find both clear correlations and some differences with published results.

Bahramian, Arash; Heinke, Craig O.; Sivakoff, Gregory R.; Gladstone, Jeanette C., E-mail: bahramia@ualberta.ca [Department of Physics, University of Alberta, CCIS 4-183, Edmonton, AB, T5K 1V4 (Canada)

2013-04-01T23:59:59.000Z

153

Heating Rate Profiles in Galaxy Clusters  

E-Print Network [OSTI]

In recent years evidence has accumulated suggesting that the gas in galaxy clusters is heated by non-gravitational processes. Here we calculate the heating rates required to maintain a physically motived mass flow rate, in a sample of seven galaxy clusters. We employ the spectroscopic mass deposition rates as an observational input along with temperature and density data for each cluster. On energetic grounds we find that thermal conduction could provide the necessary heating for A2199, Perseus, A1795 and A478. However, the suppression factor, of the clasical Spitzer value, is a different function of radius for each cluster. Based on the observations of plasma bubbles we also calculate the duty cycles for each AGN, in the absence of thermal conduction, which can provide the required energy input. With the exception of Hydra-A it appears that each of the other AGNs in our sample require duty cycles of roughly $10^{6}-10^{7}$ yrs to provide their steady-state heating requirements. If these duty cycles are unrealistic, this may imply that many galaxy clusters must be heated by very powerful Hydra-A type events interspersed between more frequent smaller-scale outbursts. The suppression factors for the thermal conductivity required for combined heating by AGN and thermal conduction are generally acceptable. However, these suppression factors still require `fine-tuning` of the thermal conductivity as a function of radius. As a consequence of this work we present the AGN duty cycle as a cooling flow diagnostic.

Edward C. D. Pope; Georgi Pavlovski; Christian R. Kaiser; Hans Fangohr

2006-01-05T23:59:59.000Z

154

2007 Wholesale Power Rate Case Initial Proposal : Wholesale Power Rate Development Study.  

SciTech Connect (OSTI)

The Wholesale Power Rate Development Study (WPRDS) calculates BPA proposed rates based on information either developed in the WPRDS or supplied by the other studies that comprise the BPA rate proposal. All of these studies, and accompanying documentation, provide the details of computations and assumptions. In general, information about loads and resources is provided by the Load Resource Study (LRS), WP-07-E-BPA-01, and the LRS Documentation, WP-07-E-BPA-01A. Revenue requirements information, as well as the Planned Net Revenues for Risk (PNNR), is provided in the Revenue Requirement Study, WP-07-E-BPA-02, and its accompanying Revenue Requirement Study Documentation, WP-07-E-BPA-02A and WP-07-E-BPA-02B. The Market Price Forecast Study (MPFS), WP-07-E-BPA-03, and the MPFS Documentation, WP-07-E-BPA-03A, provide the WPRDS with information regarding seasonal and diurnal differentiation of energy rates, as well information regarding monthly market prices for Demand Rates. In addition, this study provides information for the pricing of unbundled power products. The Risk Analysis Study, WP-07-E-BPA-04, and the Risk Analysis Study Documentation, WP-07-E-BPA-04A, provide short-term balancing purchases as well as secondary energy sales and revenue. The Section 7(b)(2) Rate Test Study, WP-07-E-BPA-06, and the Section 7(b)(2) Rate Test Study Documentation, WP-07-E-BPA-06A, implement Section 7(b)(2) of the Northwest Power Act to ensure that BPA preference customers firm power rates applied to their general requirements are no higher than rates calculated using specific assumptions in the Northwest Power Act.

United States. Bonneville Power Administration.

2007-11-01T23:59:59.000Z

155

NFC Academic Access and Equipment Rates valid 7/1/13 to 6/30/14 RATES SUBJECT TO CHANGE  

E-Print Network [OSTI]

NFC Academic Access and Equipment Rates valid 7/1/13 to 6/30/14 RATES SUBJECT TO CHANGE ACCESS/USE UNITS RATE ACCESS FEE monthly fee $29.20 LAB USAGE FEE per lab session $24.44 LAB USAGE MAX PER MONTH per month $224.72 EQUIPMENT INCLUDED EQUIPMENT UNITS RATE 50% Rate Reduction After 500 min

Amin, S. Massoud

156

Santee-3-E Wholesale Power Rate Schedule | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Santee-3-E Wholesale Power Rate Schedule Santee-3-E Wholesale Power Rate Schedule Area: None System: Georgia-Alabama-South Carolina This rate schedule shall be available to public...

157

GTA TRIP GENERATION RATES, 1986 -1996 Eric J. Miller  

E-Print Network [OSTI]

GTA TRIP GENERATION RATES, 1986 - 1996 by Eric J. Miller Department of Civil Engineering University . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2. CHANGES IN GTA TRIP GENERATION RATES, 1986-96 . . . . . . . . . . . . . . . . . . . . . 2 2 Time Female Labour Force Participation Rate

Toronto, University of

158

Integrated System Transmission and Ancillary Services Rate Calculation  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Transmission Rate 10 4.14 MillsKWh (L5 * 1000) 730 hours per month 7 RATE FOR SCHEDULING, SYSTEM CONTROL AND DISPATCH SERVICE FOR 2014 A. Fixed Charge Rate 22.770% (1)...

159

Integrated System Transmission and Ancillary Services Rate Calculation  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Transmission Rate 10 4.00 MillsKWh (L5 * 1000) 730 hours per month 7 RATE FOR SCHEDULING, SYSTEM CONTROL AND DISPATCH SERVICE FOR 2015 A. Fixed Charge Rate 21.652% (1)...

160

Uncertainty analysis of multi-rate kinetics of uranium desorption...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Uncertainty analysis of multi-rate kinetics of uranium desorption from sediments. Uncertainty analysis of multi-rate kinetics of uranium desorption from sediments. Abstract: A...

Note: This page contains sample records for the topic "rating cancel rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Auto/Steel Partnership: AHSS Stamping, Strain Rate Characterization...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AHSS Stamping, Strain Rate Characterization, Sheet Steel Fatigue, AHSS Joining AutoSteel Partnership: AHSS Stamping, Strain Rate Characterization, Sheet Steel Fatigue, AHSS...

162

Trends in Contractor Conversion Rates | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Contractor Conversion Rates Trends in Contractor Conversion Rates Better Buildings Residential Network Workforce Business Partners Peer Exchange Call Series: Trends in Contractor...

163

Burning Modes and Oxidation Rates of Soot: Relevance to Diesel...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Burning Modes and Oxidation Rates of Soot: Relevance to Diesel Particulate Traps Burning Modes and Oxidation Rates of Soot: Relevance to Diesel Particulate Traps Presentation given...

164

High Catalytic Rates for Hydrogen Production Using Nickel Electrocatal...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

High Catalytic Rates for Hydrogen Production Using Nickel Electrocatalysts with Seven-Membered Diphosphine Ligands Containing High Catalytic Rates for Hydrogen Production Using...

165

Fact #659: January 24, 2011 Fuel Economy Ratings for Vehicles...  

Energy Savers [EERE]

9: January 24, 2011 Fuel Economy Ratings for Vehicles Operating on Electricity Fact 659: January 24, 2011 Fuel Economy Ratings for Vehicles Operating on Electricity The...

166

Workshop on Thermonuclear Reaction Rates for Astrophysics Applications  

E-Print Network [OSTI]

Workshop on Thermonuclear Reaction Rates for Astrophysics Applications 24-25 November 2011, Athensrd and final circular for the Workshop on Thermonuclear Reaction Rates for Astrophysics Applications

167

Control Strategies for Centrifugal Pumps with Variable Flow Rate...  

Broader source: Energy.gov (indexed) [DOE]

Control Strategies for Centrifugal Pumps with Variable Flow Rate Requirements Control Strategies for Centrifugal Pumps with Variable Flow Rate Requirements This tip sheet discusses...

168

Fair rate assignment in interference limited multi-hop networks  

E-Print Network [OSTI]

Optimal Link Scheduling and Power Control in CDMA MultihopB. Shro?. , “Joint rate control and scheduling in multihopthe joint rate control and scheduling problem, and [26

Arisoylu, Mustafa

2006-01-01T23:59:59.000Z

169

The Potential Benefits of Distributed Generation and the Rate...  

Broader source: Energy.gov (indexed) [DOE]

The Potential Benefits of Distributed Generation and the Rate-Related Issues That May Impede Its Expansion The Potential Benefits of Distributed Generation and the Rate-Related...

170

Blazar Flaring Rates Measured with GLAST  

E-Print Network [OSTI]

We derive the minimum observing time scales to detect a blazar at a given flux level with the LAT on GLAST in the scanning and pointing modes. Based upon Phase 1 observations with EGRET, we predict the GLAST detection rate of blazar flares at different flux levels. With some uncertainty given the poor statistics of bright blazars, we predict that a blazar flare with integral flux >~ 200e-8 ph(> 100 MeV) cm^{-2} s^{-1}, which are the best candidates for Target of Opportunity pointings and extensive temporal and spectral studies, should occur every few days.

Dermer, C D

2004-01-01T23:59:59.000Z

171

Binary Capture Rates for Massive Protostars  

E-Print Network [OSTI]

The high multiplicity of massive stars in dense, young clusters is established early in their evolution. The mechanism behind this remains unresolved. Recent results suggest that massive protostars may capture companions through disk interactions with much higher efficiency than their solar mass counterparts. However, this conclusion is based on analytic determinations of capture rates and estimates of the robustness of the resulting binaries. We present the results of coupled n-body and SPH simulations of star-disk encounters to further test the idea that disk-captured binaries contribute to the observed multiplicity of massive stars.

Nickolas Moeckel; John Bally

2007-04-09T23:59:59.000Z

172

Reverse Engineering of Proteasomal Translocation Rates  

E-Print Network [OSTI]

We address the problem of proteasomal protein translocation and introduce a new stochastic model of the proteasomal digestion (cleavage) of proteins. In this model we account for the protein translocation and the positioning of cleavage sites of a proteasome from first principles. We show by test examples and by processing experimental data that our model allows reconstruction of the translocation and cleavage rates from mass spectroscopy data on digestion patterns and can be used to investigate the properties of transport in different experimental set-ups. Detailed investigation with this model will enable theoretical quantitative prediction of the proteasomal activity.

D. S. Goldobin; M. Mishto; K. Textoris-Taube; P. M. Kloetzel; A. Zaikin

2008-07-28T23:59:59.000Z

173

Blazar Flaring Rates Measured with GLAST  

E-Print Network [OSTI]

We derive the minimum observing time scales to detect a blazar at a given flux level with the LAT on GLAST in the scanning and pointing modes. Based upon Phase 1 observations with EGRET, we predict the GLAST detection rate of blazar flares at different flux levels. With some uncertainty given the poor statistics of bright blazars, we predict that a blazar flare with integral flux >~ 200e-8 ph(> 100 MeV) cm^{-2} s^{-1}, which are the best candidates for Target of Opportunity pointings and extensive temporal and spectral studies, should occur every few days.

C. D. Dermer; B. L. Dingus

2003-12-22T23:59:59.000Z

174

Utility Rates | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDIT REPORTOpenWende NewSowitec do BrasilGmbH Jump to:Rates Home Ewilson's

175

Tunneling decay rate in quantum cosmology  

E-Print Network [OSTI]

In canonical quantum cosmology, the wave function of the universe lacks explicit time dependence. However, time evolution may be present implicitly through the semiclassical superspace variables, which themselves depend on time in classical dynamics. In this paper, we apply this approach to an oscillating universe model recently introduced by Graham et al. By extending the model to include a massless, minimally coupled scalar field $\\phi$ which has little effect on the dynamics but can play the role of a "clock", we determine the decay rate of the oscillating universe.

Mithani, Audrey T

2015-01-01T23:59:59.000Z

176

Tunneling decay rate in quantum cosmology  

E-Print Network [OSTI]

In canonical quantum cosmology, the wave function of the universe lacks explicit time dependence. However, time evolution may be present implicitly through the semiclassical superspace variables, which themselves depend on time in classical dynamics. In this paper, we apply this approach to an oscillating universe model recently introduced by Graham et al. By extending the model to include a massless, minimally coupled scalar field $\\phi$ which has little effect on the dynamics but can play the role of a "clock", we determine the decay rate of the oscillating universe.

Audrey T. Mithani; Alexander Vilenkin

2015-03-02T23:59:59.000Z

177

Wholesale Power Rate Schedules | Department of Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched FerromagnetismWaste and MaterialsWenjun DengWISP SignInWho do I contact atRate

178

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111Jumpand PowerUtility Rate Home

179

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111Jumpand PowerUtility Rate

180

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111JumpandbuildingRate Home >

Note: This page contains sample records for the topic "rating cancel rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111JumpandbuildingRate Home

182

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111JumpandbuildingRate Homeclean

183

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111JumpandbuildingRate HomecleanEIA

184

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111JumpandbuildingRate

185

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111JumpandbuildingRateEZFeed Type

186

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111JumpandbuildingRateEZFeed

187

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: Salt Lake City, Utah Zip: 84111JumpandbuildingRateEZFeedUtility

188

gas rates | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place:ReferenceEditWisconsin:YBR SolarZe-gen JumpZincZoomZougas rates

189

BPA Power Rates (pbl/main)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to someone6 M. Babzien, I. Ben-Zvi, P. Study of SmartRates Announcements

190

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,Save Energy NowNew Hampshire AddressGRRUtility Rate Home >

191

Property:HeatRate | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County, Maine:PlugNumberOfArraProjectTypeTopic2GrossGen JumpRating Jump

192

Power Function Review (pbl/rates)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home Design PassivePostdoctoral Opportunities Are you YourRates >

193

2007 Wholesale Power Rate Case Initial Proposal : Direct Testimony.  

SciTech Connect (OSTI)

The purpose of our testimony is to sponsor the rate design portions of Bonneville Power Administration's (BPA) Wholesale Power Rate Development Study (WPRDS), WP-07-E-BPA-05, and associated portions of the Wholesale Power Rate Schedules and GRSPs (WP-07-E-BPA-07). Our testimony is organized in eight sections. The first section outlines the purpose of our testimony. Section 2 describes BPA's Demand Rates, including subsections on the definition of the Demand Rate, the method for computing the Demand Rates, and differences from the currently effective WP-02 Demand Rate. Section 3 describes BPA's Load Variance Rate, with subsections on the definition and purpose of the Load Variance Rate, application of the Load Variance Rate, how the Load Variance Rate is calculated, and the differences from the WP-02 Load Variance Rate. Section 4 describes the steps involved in developing BPA's energy rates and differences from the WP-02 rate case. Section 5 discusses discontinuation of the Stepped Up Multi-Year Block Rate. Section 6 describes a minor change to the Unauthorized Increase Rates and the Excess Factoring Rates. Section 7 describes the Targeted Adjustment Charge. Section 8 addresses the Operating Reserves Credit.

United States. Bonneville Power Administration.

2005-11-01T23:59:59.000Z

194

U.S. Department of Energy Project Definition Rating Index Guide  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Guide assists individuals and teams involved in conducting assessments of project definition (i.e., how well front-end planning has been conducted to define project scope) using a numerical project management tool developed by the Construction Industry Institute (CII), tailored for DOE use. Called the Project Definition Rating Index (PDRI), the PDRI is a simple but powerful tool that facilitates the measurement of the degree of scope definition for completeness for traditional construction projects, both nuclear and non-nuclear. No cancellations.

2010-07-22T23:59:59.000Z

195

On the Annihilation Rate of WIMPs  

E-Print Network [OSTI]

We develop a formalism that allows one to systematically calculate the WIMP annihilation rate into gamma rays whose energy far exceeds the weak scale. A factorization theorem is presented which separates the radiative corrections stemming from initial state potential interactions from loops involving the final state. This separation allows us to go beyond the fixed order calculation, which is polluted by large infrared logarithms. For the case of Majorana WIMPs transforming in the adjoint representation of SU(2), we present the result for the resummed rate at leading double log accuracy in terms of two initial state partial wave matrix elements and one hard matching coefficient. For a given model, one may calculate the cross section by calculating the tree level matching coefficient and determining the value of a local four fermion operator. We find that the effects of resummation can be as large as 100% for a 20 TeV WIMP. The generalization of the formalism to other types of WIMPs is discussed.

Matthew Baumgart; Ira Z. Rothstein; Varun Vaidya

2014-10-29T23:59:59.000Z

196

Reverse-Engineering Banks' Financial Strength Ratings Using ...  

E-Print Network [OSTI]

Dec 27, 2006 ... reverse-engineering a superior bank rating system, which turns out to ...... sector (

mal92

2009-05-16T23:59:59.000Z

197

Workshop on Thermonuclear Reaction Rates for Astrophysics Applications  

E-Print Network [OSTI]

Workshop on Thermonuclear Reaction Rates for Astrophysics Applications 24-25 November 2011, Athens circular for the Workshop on Thermonuclear Reaction Rates for Astrophysics Applications, to be held of thermonuclear reaction rates. The topics of the workshop, in relation with thermonuclear reaction rates

198

Implementation of home energy rating systems  

SciTech Connect (OSTI)

This paper presents the findings of a national survey of home energy rating and labelling programs (HERS). We discuss the nature of different implementation problems and the kinds of strategies that have been used to deal with them to ensure the effective penetration of HERS to all HERS-users. Of further special interest to us has been the nature of different delivery systems. We examined 34 HERS, located in 28 states: 13 of these were located in the southeast, 8 in the midwest, 5 in the northeast, 4 in the Pacific/mountain region, and 3 in the southwest. Although our survey does not represent a scientific sampling of HERS, we believe that the final distribution accurately reflects the distribution of HERS through the country and the full range of likely implementation and delivery programs.

Vine, E.; Barnes, B.K.; Ritschard, R.

1987-02-01T23:59:59.000Z

199

Bioremediation of oil-contaminated soil -- A rate model  

SciTech Connect (OSTI)

Three rate equations, a modified Monod equation and two mass transfer rate equations, were used to calculate the biodegradation rate, oxygen transfer rate and oil transfer rate during a bioremediation process of oil-contaminated soil. Based on experimental rate constants, these three rates were calculated and compared. It was found the bioremediation rate of oil-contaminated soil could be controlled by the mass transfer process of oil into aqueous solution (0.12 mg BOD/(1-h)). When the oil transfer rate is enhanced by at least 10 times, the oxygen transfer process (0.1--1.0 mg BOD/(1-h)) becomes the rate-controlling step. For most of the cases, the biodegradation of oil in aqueous solution is not the limiting step unless the microbial population in the aqueous solution is less than 100 mg VSS/1.

Li, K.Y.; Zhang, Y.; Xu, T. [Lamar Univ., Beaumont, TX (United States). Chemical Engineering Dept.] [Lamar Univ., Beaumont, TX (United States). Chemical Engineering Dept.

1995-12-31T23:59:59.000Z

200

Rates for Color Shifted Microlensing Events  

E-Print Network [OSTI]

If the objects responsible for gravitational microlensing (ML) of Galactic-bulge stars are faint dwarfs, then blended light from the lens will distort the shape of the ML light curve and shift the color of the observed star during the event. The resolution in current surveys is not accurate enough to observe this effect, but it should be detected with frequent and precise followup observations. We calculate the expected rates for ML events where the shape distortions will be observable by such followup observations, assuming that the lenses are ordinary main-sequence stars in a bar and in the disk. We study the dependence of the rates for color-shifted (CS) events on the frequency of followup observations and on the precision of the photometry for a variety of waveband pairings. We find that for hourly observations in $B$ and $K$ with typical photometric errors of 0.01 mag, 28\\% of the events where a main-sequence bulge star is lensed, and 7\\% of the events where the source is a bulge giant, will give rise to a measurable CS at the 95\\% confidence level. For observations in $V$ and $I$, the fractions become 18\\% and 5\\%, respectively, but may be increased to 40\\% and 13\\% by improved photometric accuracy and increased sampling frequency. We outline how the mass, distance, and transverse speed of the lens can be obtained, giving examples of typical errors. We discuss how CS events can be distinguished from events where the source is blended with a binary companion.

Ari Buchalter; Marc Kamionkowski; R. Michael Rich

1995-11-08T23:59:59.000Z

Note: This page contains sample records for the topic "rating cancel rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

In-cell reaction rate distributions and cell-average reaction rates in fast critical assemblies  

SciTech Connect (OSTI)

Measurements are described for determining average values of fission rates in /sup 235/U, /sup 238/U and /sup 239/Pu and capture rates in /sup 238/U for heterogeneous cells used to construct fast critical assemblies. The measurements are based on irradiations of foils of /sup 238/U, /sup 235/U and /sup 239/Pu with counting of fission and capture products using gamma-ray spectroscopy. Both plate and pin cells are considered. Procedures are described for inferring cell-average reaction rate values from a single foil location based on a cell using a quantity called a cell factor. Cell factors are determined from special measurements in which several foils are irradiated within a cell. Comparisons are presented between cell factors determined by measurements and by Monte Carlo calculations which lend credibility to the measurement procedures.

Brumbach, S.B.; Gasidlo, J.M.

1985-08-01T23:59:59.000Z

202

NFC Industrial Access and Equipment Rates valid 7/1/13 to 6/30/14 RATES SUBJECT TO CHANGE  

E-Print Network [OSTI]

NFC Industrial Access and Equipment Rates valid 7/1/13 to 6/30/14 RATES SUBJECT TO CHANGE ACCESS/USE UNITS RATE ACCESS FEE monthly fee $91.00 LAB USAGE FEE per lab session $67.50 LAB USAGE MAX PER MONTH per month $631.00 EQUIPMENT INCLUDED EQUIPMENT UNITS RATE ALDATOMIC LAYER DEP ALD Savannah 200 minute

Amin, S. Massoud

203

A New Series of Rate Decline Relations Based on the Diagnosis of Rate-Time Data  

E-Print Network [OSTI]

functional for the b-parameter. The next step of this procedure is to test and validate each of the rate decline relations by applying them to various numerical simulation cases (for gas), as well as for field data cases obtained from tight/shale gas...

Boulis, Anastasios

2010-01-14T23:59:59.000Z

204

ANALYTICAL STAR FORMATION RATE FROM GRAVOTURBULENT FRAGMENTATION  

SciTech Connect (OSTI)

We present an analytical determination of the star formation rate (SFR) in molecular clouds, based on a time-dependent extension of our analytical theory of the stellar initial mass function. The theory yields SFRs in good agreement with observations, suggesting that turbulence is the dominant, initial process responsible for star formation. In contrast to previous SFR theories, the present one does not invoke an ad hoc density threshold for star formation; instead, the SFR continuously increases with gas density, naturally yielding two different characteristic regimes, thus two different slopes in the SFR versus gas density relationship, in agreement with observational determinations. Besides the complete SFR derivation, we also provide a simplified expression, which reproduces the complete calculations reasonably well and can easily be used for quick determinations of SFRs in cloud environments. A key property at the heart of both our complete and simplified theory is that the SFR involves a density-dependent dynamical time, characteristic of each collapsing (prestellar) overdense region in the cloud, instead of one single mean or critical freefall timescale. Unfortunately, the SFR also depends on some ill-determined parameters, such as the core-to-star mass conversion efficiency and the crossing timescale. Although we provide estimates for these parameters, their uncertainty hampers a precise quantitative determination of the SFR, within less than a factor of a few.

Hennebelle, Patrick [Laboratoire de Radioastronomie, UMR CNRS 8112, Ecole Normale Superieure et Observatoire de Paris, 24 rue Lhomond, 75231 Paris Cedex 05 (France); Chabrier, Gilles [Ecole Normale Superieure de Lyon, CRAL, UMR CNRS 5574, 69364 Lyon Cedex 07 (France)

2011-12-20T23:59:59.000Z

205

Solids flow rate measurement in dense slurries  

SciTech Connect (OSTI)

Accurate and rapid flow rate measurement of solids in dense slurries remains an unsolved technical problem, with important industrial applications in chemical processing plants and long-distance solids conveyance. In a hostile two-phase medium, such a measurement calls for two independent parameter determinations, both by non-intrusive means. Typically, dense slurries tend to flow in laminar, non-Newtonian mode, eliminating most conventional means that usually rely on calibration (which becomes more difficult and costly for high pressure and temperature media). These issues are reviewed, and specific solutions are recommended in this report. Detailed calculations that lead to improved measuring device designs are presented for both bulk density and average velocity measurements. Cross-correlation, chosen here for the latter task, has long been too inaccurate for practical applications. The cause and the cure of this deficiency are discussed using theory-supported modeling. Fluid Mechanics are used to develop the velocity profiles of laminar non-Newtonian flow in a rectangular duct. This geometry uniquely allows the design of highly accurate `capacitive` devices and also lends itself to gamma transmission densitometry on an absolute basis. An absolute readout, though of less accuracy, is also available from a capacitive densitometer and a pair of capacitive sensors yields signals suitable for cross-correlation velocity measurement.

Porges, K.G.; Doss, E.D.

1993-09-01T23:59:59.000Z

206

Minimizing Variation in Outdoor CPV Power Ratings: Preprint  

SciTech Connect (OSTI)

The CPV community has agreed to have both indoor and outdoor power ratings at the module level. The indoor rating provides a repeatable measure of module performance as it leaves the factory line while the outdoor rating provides a measure of true performance under real world conditions. The challenge with an outdoor rating is that the spectrum, temperature, wind speed, etc are constantly in flux and therefore the resulting power rating varies from day to day and month to month. This work examines different methodologies for determining the outdoor power rating with the goal of minimizing variation even if data are collected under changing meteorological conditions.

Muller, M.; Marion, B.; Rodriguez, J.; Kurtz, S.

2011-07-01T23:59:59.000Z

207

act transportation rate: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

rates are calculated and compared. The ortho- isomer has a very small rate of transport. 1999 Ferreira, Mrcia M. C. 89 2008 James L. Oberstar Forum on Transportation Policy...

208

Enhancing the Lithiation Rate of Silicon Nanowires by the Inclusion...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Enhancing the Lithiation Rate of Silicon Nanowires by the Inclusion of Tin. Enhancing the Lithiation Rate of Silicon Nanowires by the Inclusion of Tin. Abstract: Silicon (Si) has a...

209

Essays on Real Exchange Rates and Theoretical Monetary Aggregation  

E-Print Network [OSTI]

This dissertation is a collection of three essays focused on real exchange rates and theoretical monetary aggregation. The first essay focused on the convergence of real exchange rates' idiosyncratic effects after isolating ...

Zheng, Mingming

2014-05-31T23:59:59.000Z

210

Big changes in liquidity - how they affect power rates  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

lot of help from its customers, BPA was able to reduce its FY 2007-2009 power rates from those in the prior rate period while still meeting its fi nancial standards and legal...

211

Deforestation in Brazilian Amazonia: History, Rates, and Consequences  

E-Print Network [OSTI]

Deforestation in Brazilian Amazonia: History, Rates, and Consequences PHILIP M. FEARNSIDE Instituto of deforestation began with the inauguration of the Transamazon Highway in 1970. Amazonian deforestation rates have that make deforestation profitable. Forest degradation results from logging, ground fires (facilitated

Gottgens, Hans

212

Utility Rate Design Revision - A Frisbee Full of Boomerangs  

E-Print Network [OSTI]

Rising electricity prices have prompted investigation of utility rates and proposals for changed in their design. The purpose of this paper is to discuss the current design of electric rates, changes proposed, actual trends, and predictable results...

Dannenmaier, J. H.

1979-01-01T23:59:59.000Z

213

Microsoft Word - News Release -- Rates Initial Proposal Dec ...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

utilities, the Bonneville Power Administration today proposed a 6.7 percent average wholesale power rate increase for the fiscal year 2016-2017 rate period. BPA is also proposing...

214

From: Sent: Subject: Attachments: SNR-Rates, SNR  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

SNR - Rates From: Sent: Subject: Attachments: SNR-Rates, SNR Friday, August 22, 2014 3:03 PM 2015 Initial Power Restoration Fund Obligation FY 2015 Initial Restoration Fund Letter...

215

Inflation targeting in emerging countries: the exchange rate issues  

E-Print Network [OSTI]

The current discussion of Inflation Targeting (IT) in emerging economies deals with the effects that nominal exchange rate movements have on the overall inflation rate. The literature has focused in the analysis of the advantages and disadvantages...

Reyes Altamirano, Javier Arturo

2004-09-30T23:59:59.000Z

216

Rangeland Drought Management for Texans: Stocking Rate and Grazing Management  

E-Print Network [OSTI]

This publication explains how stocking rates and grazing management decisions can help a ranch survive a drought. To deal with drought, a rancher must monitor forage supply and demand; use a conservative stocking rate and keep it flexible...

Hart, Charles R.; Carpenter, Bruce B.

2001-05-03T23:59:59.000Z

217

Cost of Service and Rate Design Issues Affecting Industrial Customers in Retail Rate Proceedings  

E-Print Network [OSTI]

alternative is not selected, or when the selected capacity expansion plan results in excess generation. A reduction in invested capital will reduce the system revenue requirements. The rate of return is equal to the sum of the weighted cost of debt plus... the position that the cost of all or part of an imprudent management decision should be borne by the stockholder. Prudency issues are usually raised when the cost of new generation units are excessive, when the most economic generation expansion...

Stover, C. N. Jr.

218

Flow Rate Estimates Qs and As Q: What is the Flow Rate Technical Group?  

E-Print Network [OSTI]

to the BP oil spill in the Gulf of Mexico be stepped up as a result of the new flow rate estimates released their initial estimate. · The first approach analyzed how much oil is on the surface of the Gulf of Mexico using,000 and 270,000 barrels of oil are on the surface of the Gulf of Mexico and that a similar amount had already

Fleskes, Joe

219

Property:OpenEI/UtilityRate/EnergyRateStructure/Tier6Sell | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscotInformation Max Jump to: navigation, search This isInformation Rate

220

Rate Control Management of Atrial Fibrillation: May a Mathematical Model Suggest an Ideal Heart Rate?  

E-Print Network [OSTI]

Background. Despite the routine prescription of rate control therapy for atrial fibrillation (AF), clinical evidence demonstrating a heart rate target is lacking. Aim of the present study was to run a mathematical model simulating AF episodes with a different heart rate (HR) to predict hemodynamic parameters for each situation. Methods. The lumped model, representing the pumping heart together with systemic and pulmonary circuits, was run to simulate AF with HR of 50, 70, 90, 110 and 130 bpm, respectively. Results. Left ventricular pressure increased by 56.7%, from 33.92+-37.56 mmHg to 53.15+-47.56 mmHg, and mean systemic arterial pressure increased by 27.4%, from 82.66+-14.04 mmHg to 105.29+-7.63 mmHg, at the 50 and 130 bpm simulations, respectively. Stroke volume (from 77.45+-8.5 to 39.09+-8.08 mL), ejection fraction (from 61.1+-4.4 to 39.32+-5.42%) and stroke work (SW, from 0.88+-0.04 to 0.58+-0.09 J) decreased by 49.5, 35.6 and 34.2%, at the 50 and 130 bpm simulations, respectively. In addition, oxygen co...

Anselmino, Matteo; Camporeale, Carlo; Saglietto, Andrea; Gaita, Fiorenzo; Ridolfi, Luca

2015-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "rating cancel rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Minimizing Variation in Outdoor CPV Power Ratings (Presentation)  

SciTech Connect (OSTI)

Module data from NREL's CPV test bed is used to examine methods for calculating outdoor CPV power ratings. IEC 62670 and ASTM E2527 are used as a starting point for determining a module power rating on a monthly basis. Monthly power ratings vary by more than desired using existing methods. The presentation examines modifications to existing methods as well as spectral corrections to reduce variation in monthly module power ratings.

Muller, M.

2011-02-01T23:59:59.000Z

222

HEART RATE VARIABILITY AS DETERMINISM WITH JUMP STOCHASTIC PARAMETERS  

E-Print Network [OSTI]

HEART RATE VARIABILITY AS DETERMINISM WITH JUMP STOCHASTIC PARAMETERS JIONGXUAN ZHENG, JOE SKUFCA, AND ERIK BOLLT§ Abstract. We use measured heart rate information (RR intervals) to develop a one with persistence which causes the heart rate and rhythm system to wander about a bifurcation point. We propose

Bollt, Erik

223

Heart Rate Dynamics Before Spontaneous Onset of Ventricular  

E-Print Network [OSTI]

Heart Rate Dynamics Before Spontaneous Onset of Ventricular Fibrillation in Patients With Healed V. Huikuri, MD The traditional methods of analyzing heart rate (HR) variability have failed myocardial infarction has been shown to be in- creased in patients with reduced heart rate (HR) vari- ability

224

Modeling of strain rate effects on clay in simple shear  

E-Print Network [OSTI]

strength and log scale of strain rate. To include the effects of strain rate, the modified simple effective stress model starts with two assumptions: (1) a specific shear strength corresponds to a specific strain rate in a unique relation; and (2...

Jung, Byoung Chan

2006-08-16T23:59:59.000Z

225

EIS-0093: Bonneville Power Administration's 1982 Rate Proposal  

Broader source: Energy.gov [DOE]

The U.S. Department of Energy's Bonneville Power Administration prepared this statement to evaluate the potential environmental impacts associated with an increase in wholesale power rates for calendar year 1982, including the effects of rate hikes in that year, the cumulative effects of rate hikes from 1979-1985, as well as alternative revenue scenarios.

226

EIS-0102: Bonneville Power Administration's 1983 Wholesale Power Rate  

Broader source: Energy.gov [DOE]

The U.S. Department of Energy's Bonneville Power Administration prepared this EIS to evaluate the potential environmental impacts associated with an increase in wholesale power rates that would become effective on November 1, 1983, including the effects of rate hikes in that year and the cumulative effects of previous rate hikes.

227

An Evolutionary Reduction Principle for Mutation Rates at Multiple Loci  

E-Print Network [OSTI]

An Evolutionary Reduction Principle for Mutation Rates at Multiple Loci Lee Altenberg altenber of the reduction principle is found: reduction results at individual loci combine topologically to produce to the reduction principle, and under fine tuning of mutation rates would be expected to have higher mutation rates

Altenberg, Lee

228

EXPLAINING OUTCROSSING RATE IN CAMPANULASTRUM AMERICANUM (CAMPANULACEAE): GEITONOGAMY  

E-Print Network [OSTI]

SELF-INCOMPATIBILITY Leah J. Kruszewski and Laura F. Galloway1 Department of Biology, University, the high outcrossing rate could result from cryptic self-incompatibility, a mechanism that favors outcross differential growth rates of self and outcross pollen tubes produce cryptic self-incompatibility. Growth rates

Galloway, Laura F.

229

Chukwuemeka I. Okoye Carbon Dioxide Solubility and Absorption Rate in  

E-Print Network [OSTI]

Copyright by Chukwuemeka I. Okoye 2005 #12;Carbon Dioxide Solubility and Absorption Rate _______________________ Nicholas A. Peppas #12;Carbon Dioxide Solubility and Absorption Rate in Monoethanolamine/Piperazine/H2O for. #12;iii Carbon Dioxide Solubility and Absorption Rate in Monoethanolamine/Piperazine/H2O

Rochelle, Gary T.

230

Strategic Rate Design: The Role of Industrial Tariffs  

E-Print Network [OSTI]

utilities have as a primary objective the goal of setting rates that fully reflect costs. Even within this constraint, alternative pricing mechanisms are available to allow the utility to engage in strategic rate design. For example, time-of-use rates... to the same MW made up of several smaller-sized units, the larger-sized contracts are charged at a higher rate. The rate for the energy charge depends on time of use and a liberal tilt of the capacity costs into the energy charge provides the customer a...

Rosenblum, J. I.; House, R.

231

Optimization of well rates under gas coning conditions  

E-Print Network [OSTI]

production rates under gas caning conditions. This new method applies to an oil reservoir overlain by a large gas cap containing multiple wells. The cases consider have a limit on the maximum field production rate for both oil and gas. It was found... that the optimal p~ion rates are achieved when Eq. 1 is satisfied for any pair of wells i and j: ) I = constant i = 1, . . . , n dqo This condition minimizes the f ield gas production rate when the maximum field production rate for oil is met, and maximizes...

Urbanczyk, Christopher Henry

1989-01-01T23:59:59.000Z

232

HIgh Rate X-ray Fluorescence Detector  

SciTech Connect (OSTI)

The purpose of this project was to develop a compact, modular multi-channel x-ray detector with integrated electronics. This detector, based upon emerging silicon drift detector (SDD) technology, will be capable of high data rate operation superior to the current state of the art offered by high purity germanium (HPGe) detectors, without the need for liquid nitrogen. In addition, by integrating the processing electronics inside the detector housing, the detector performance will be much less affected by the typically noisy electrical environment of a synchrotron hutch, and will also be much more compact than current systems, which can include a detector involving a large LN2 dewar and multiple racks of electronics. The combined detector/processor system is designed to match or exceed the performance and features of currently available detector systems, at a lower cost and with more ease of use due to the small size of the detector. In addition, the detector system is designed to be modular, so a small system might just have one detector module, while a larger system can have many â?? you can start with one detector module, and add more as needs grow and budget allows. The modular nature also serves to simplify repair. In large part, we were successful in achieving our goals. We did develop a very high performance, large area multi-channel SDD detector, packaged with all associated electronics, which is easy to use and requires minimal external support (a simple power supply module and a closed-loop water cooling system). However, we did fall short of some of our stated goals. We had intended to base the detector on modular, large-area detectors from Ketek GmbH in Munich, Germany; however, these were not available in a suitable time frame for this project, so we worked instead with pnDetector GmbH (also located in Munich). They were able to provide a front-end detector module with six 100 m^2 SDD detectors (two monolithic arrays of three elements each) along with associated preamplifiers; these detectors surpassed the performance we expected to get from the Ketek detectors, however they are housed in a sealed module, which does not offer the ease of repair and expandability weâ??d hoped to achieve with the Ketek SDDâ??s. Our packaging efforts were quite successful, as we came up with a very compact way to mount the detector and to house the associated electronics, as well as a very effective way to reliably take out the heat (from the electronics as well as the detectorâ??s Peltier coolers) without risk of condensation and without external airflow or vibration, which could create problems for the target applications. While we were able to design compact processing electronics that fit into the detector assembly, they are still at the prototype stage, and would require a significant redesign to achieve product status. We have not yet tested this detector at a synchrotron facility; we do still plan on working with some close contacts at the nearby Stanford Synchrotron Radiation Laboratory (SSRL) to get some testing with the beam (using existing commercial electronics for readout, as the integrated processor is not ready for use).

Grudberg, Peter Matthew [XIA LLC

2013-04-30T23:59:59.000Z

233

Compensated count-rate circuit for radiation survey meter  

DOE Patents [OSTI]

A count-rate compensating circuit is provided which may be used in a portable Geiger-Mueller (G-M) survey meter to ideally compensate for counting loss errors in the G-M tube detector. In a G-M survey meter, wherein the pulse rate from the G-M tube is converted into a pulse rate current applied to a current meter calibrated to indicate dose rate, the compensated circuit generates and controls a reference voltage in response to the rate of pulses from the detector. This reference voltage is gated to the current-generating circuit at a rate identical to the rate of pulses coming from the detector so that the current flowing through the meter is varied in accordance with both the frequency and amplitude of the reference voltage pulses applied thereto so that the count rate is compensated ideally to indicate a true count rate within 1% up to a 50% duty cycle for the detector. A positive feedback circuit is used to control the reference voltage so that the meter output tracks true count rate indicative of the radiation dose rate.

Todd, Richard A. (Powell, TN)

1981-01-01T23:59:59.000Z

234

Compensated count-rate circuit for radiation survey meter  

DOE Patents [OSTI]

A count-rate compensating circuit is provided which may be used in a portable Geiger-Mueller (G-M) survey meter to ideally compensate for couting loss errors in the G-M tube detector. In a G-M survey meter, wherein the pulse rate from the G-M tube is converted into a pulse rate current applied to a current meter calibrated to indicate dose rate, the compensation circuit generates and controls a reference voltage in response to the rate of pulses from the detector. This reference voltage is gated to the current-generating circuit at a rate identical to the rate of pulses coming from the detector so that the current flowing through the meter is varied in accordance with both the frequency and amplitude of the reference voltage pulses applied thereto so that the count rate is compensated ideally to indicate a true count rate within 1% up to a 50% duty cycle for the detector. A positive feedback circuit is used to control the reference voltage so that the meter output tracks true count rate indicative of the radiation dose rate.

Todd, R.A.

1980-05-12T23:59:59.000Z

235

WP-96/TR-96 & TC-96 Power and Transmission Rate Case (rates/ratecases)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism inS-4500IIVasudhaSurface.Laboratory30,WP-07 power rates On

236

Property:OpenEI/UtilityRate/DemandRateStructure/Tier3Adjustment | Open  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County,ContAddr2NumberOfPrograms Jump to:URIInformation Rate Jump to:Energy

237

Property:OpenEI/UtilityRate/DemandRateStructure/Tier3Max | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County,ContAddr2NumberOfPrograms Jump to:URIInformation Rate Jump

238

Property:OpenEI/UtilityRate/DemandRateStructure/Tier4Adjustment | Open  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County,ContAddr2NumberOfPrograms Jump to:URIInformation RateEnergy

239

Minimizing Variation in Outdoor CPV Power Ratings (Presentation)  

SciTech Connect (OSTI)

Presented at the 7th International Conference on Concentrating Photovoltaic Systems (CPV-7), 4-6 April 2011, Las Vegas, Nevada. The CPV community has agreed to have both indoor and outdoor power ratings at the module level. The indoor rating provides a repeatable measure of module performance as it leaves the factory line while the outdoor rating provides a measure of true performance under real world conditions. The challenge with an outdoor rating is that the spectrum, temperature, wind speed, etc are constantly in flux and therefore the resulting power rating varies from day to day and month to month. This work examines different methodologies for determining the outdoor power rating with the goal of minimizing variation even if data are collected under changing meteorological conditions.

Muller, M.

2011-04-01T23:59:59.000Z

240

Electrochemical Corrosion Rate Sensors for Waste Incineration Applications  

SciTech Connect (OSTI)

Electrochemical corrosion rate sensors work in high temperature waste incineration applications where ash is deposited. The ash serves as the electrolyte for electrochemical measurements, such as liner polarization resistance, electrochemical noise, and harmonic distortion analyses. Results to date have shown that these types of sensors respond qualitatively to changes in temperature, gas composition, alloy composition, and type of ash. Several years of research have shown that high temperature corrosion rate probes need to be better understood before corrosion rate can be used as a process variable by power plant operators. More recent research has shown that electrochemical corrosion probes typically measure lower corrosion rates than those measured by standard mass loss techniques. While still useful for monitoring changes in corrosion rates, absolute probe corrosion rates will need a calibration factor to be useful. Ideas for research that may help resolve these issues are presented.

Covino, B.S., Jr.; Bullard, S.J.; Matthes, S.A.; Holcomb, G.R.; Ziomek-Moroz, M.; Eden, D.A. (Honeywell Intercorr)

2007-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "rating cancel rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Radiation dose rates from UF{sub 6} cylinders  

SciTech Connect (OSTI)

This paper describes the results of many studies, both theoretical and experimental, which have been carried out by Urenco over the last 15 years into radiation dose rates from uranium hexafluoride (UF{sub 6}) cylinders. The contents of the cylinder, its history, and the geometry all affect the radiation dose rate. These factors are all examined in detail. Actual and predicted dose rates are compared with levels permitted by IAEA transport regulations.

Friend, P.J. [Urenco, Capenhurst (United Kingdom)

1991-12-31T23:59:59.000Z

242

Experiences with leak rate calculations methods for LBB application  

SciTech Connect (OSTI)

In this paper, three leak rate computer programs for the application of leak before break analysis are described and compared. The programs are compared to each other and to results of an HDR Reactor experiment and two real crack cases. The programs analyzed are PIPELEAK, FLORA, and PICEP. Generally, the different leak rate models are in agreement. To obtain reasonable agreement between measured and calculated leak rates, it was necessary to also use data from detailed crack investigations.

Grebner, H.; Kastner, W.; Hoefler, A.; Maussner, G. [and others

1997-04-01T23:59:59.000Z

243

Cost Bases for Incentive Rates Applicable to Industrial Loads  

E-Print Network [OSTI]

great deal of attention and increased acceptance. This represents a substantial change in attitude, particularly on the part of the regulatory commissions; a few years ago any proposal related to an incentive type rate would not have been... in rate discrimination as between customer classes. Over the last few years many utilities have experienced changes that have resulted in increased interest in incentive rates by the utility, by its customer, and by the regulatory commission. In most...

Stover, C. N.

244

High temperature electrochemical corrosion rate probes for combustion environments  

SciTech Connect (OSTI)

Electrochemical corrosion rate probes have been constructed and tested along with mass loss coupons in an air plus water vapor and a N2/O2/CO2 plus water vapor environment. Temperatures ranged from 200? to 700?C. Results show that electrochemical corrosion rates for ash-covered mild steel are a function of time, temperature and process environment. Correlation between the electrochemical and mass loss corrosion rates was poor.

Covino, Bernard S., Jr.; Bullard, Sophie J.; Cramer, Stephen D.; Holcomb, Gordon R.; Ziomek-Moroz, Margaret; Eden, David A. (Intercorr International Inc.); Kane, Russell D. (Intercorr International Inc.); Eden, Dawn C. (Intercorr International Inc.)

2004-01-01T23:59:59.000Z

245

Charged-Particle Thermonuclear Reaction Rates: III. Nuclear Physics Input  

E-Print Network [OSTI]

The nuclear physics input used to compute the Monte Carlo reaction rates and probability density functions that are tabulated in the second paper of this series (Paper II) is presented. Specifically, we publish the input files to the Monte Carlo reaction rate code RatesMC, which is based on the formalism presented in the first paper of this series (Paper I). This data base contains overwhelmingly experimental nuclear physics information. The survey of literature for this review was concluded in November 2009.

Christian Iliadis; Richard Longland; Art Champagne; Alain Coc

2010-04-23T23:59:59.000Z

246

Home energy ratings systems: Actual usage may vary  

SciTech Connect (OSTI)

Home energy ratings (HERS) attempt to predict typical energy costs for a given residence and estimate the savings potentials of various energy retrofits. This article discusses where the ratings could be improved to more accurately predict the actual energy consumption. Topics covered include the following: is HERS on target (scores, energy predictions, recommended energy improvements); why HERS aren`t perfect; improvements in HERS; the possibility that home energy ratings systems will become market driven. 1 fig., 2 tabs.

Stein, J.R. [Lawrence Berkeley National Lab., CA (United States)

1997-09-01T23:59:59.000Z

247

Optimization Online - Convergence rate analysis of the forward ...  

E-Print Network [OSTI]

Oct 9, 2014 ... Convergence rate analysis of the forward-Douglas-Rachford splitting scheme. Damek Davis (Damek ***at*** math.ucla.edu). Abstract: Operator ...

Damek Davis

2014-10-09T23:59:59.000Z

248

air change rate: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Rydhof 2 Traffic-related air pollution exposures and changes in heart rate variability in Mexico City: A panel study MIT - DSpace Summary: Abstract Background While air pollution...

249

air change rates: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Rydhof 2 Traffic-related air pollution exposures and changes in heart rate variability in Mexico City: A panel study MIT - DSpace Summary: Abstract Background While air pollution...

250

ORISE: Report shows nuclear engineering graduation rates on the...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ORISE report shows nuclear engineering graduation rates on the rise in 2013 Number of graduate degrees expected to remain consistent, but undergraduate degrees could see decrease...

251

Updated fracture incidence rates for the US version of FRAX®  

E-Print Network [OSTI]

presenting with non-vertebral fractures. Osteoporos Int 18:2006) Epidemiology of vertebral fractures: implications forORIGINAL ARTICLE Updated fracture incidence rates for the US

Ettinger, B.; Black, D. M.; Dawson-Hughes, B.; Pressman, A. R.; Melton, L. J.

2010-01-01T23:59:59.000Z

252

Regional Dialogue Guidebook: Background on Products, Rates, and...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

on Products, Rates, and Resource Support Services available to BPA's Public Utilities Updated June 4, 2010 This page intentionally left blank. For Regional Dialogue...

253

acrosome reaction rate: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

fertilizing capacity29 . A Received 1 March; accepted 23 April Myhr, Karen 2 On thermonuclear reaction rates Astrophysics (arXiv) Summary: Nuclear reactions govern major...

254

Calculation of tunneling rates across a barrier with continuous potential  

E-Print Network [OSTI]

Here, approximate, but accurate expressions for calculation of wavefunctions and tunneling rates are obtained using the method of uniform asymptotic expansion.

Sina Khorasani

2011-04-10T23:59:59.000Z

255

Guidance on Utility Rate Estimations and Weather Normalization...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

and Weather Normalization in an ESPC Document explains how to use estimated energy rates and normalized weather data in determining an energy service company's (ESCO's)...

256

Gradient methods for convex minimization: better rates under ...  

E-Print Network [OSTI]

Mar 20, 2013 ... Gradient methods for convex minimization: better rates under weaker conditions. Hui Zhang(hhuuii.zhang ***at*** gmail.com)

Hui Zhang

2013-03-20T23:59:59.000Z

257

Merger and Ring Galaxy Formation Rates at z<=2  

E-Print Network [OSTI]

We compare the observed merger rate of galaxies over cosmic time and the frequency of collisional ring galaxies (CRGs), with analytic models and halo merger and collision rates from a large cosmological simulation. In the Lambda cold dark matter (LCDM) model we find that the cosmic {\\it merger fraction} does not evolve strongly between 0.2rate since z~1 might not be tied to a disappearing population of major mergers. Halos hosting massive galaxies undergo on average ~2 mergers from z~2 up to present day, reflecting the late assembly time for the massive systems and the related downsizing problem. The cosmic {\\it merger rate} declines with redshift: at the present time it is a factor of 10 lower than at z~2, in reasonable agreement with the current available data. The rate of CRG formation derived from the interactions between halo progenitors up to z=2 is found to be a good tracer of the cosmic merger rate. In the LCDM model the rate of CRGs as well as the merger rate do not scale as (1+z)^m, as suggested by previous models. Our predictions of cosmic merger and CRG rates may be applied to forthcoming surveys such as GOODS and zCOSMOS.

E. D'Onghia; M. Mapelli; B. Moore

2008-06-20T23:59:59.000Z

258

Tomography increases key rates of quantum-key-distribution protocols  

E-Print Network [OSTI]

We construct a practically implementable classical processing for the BB84 protocol and the six-state protocol that fully utilizes the accurate channel estimation method, which is also known as the quantum tomography. Our proposed processing yields at least as high key rate as the standard processing by Shor and Preskill. We show two examples of quantum channels over which the key rate of our proposed processing is strictly higher than the standard processing. In the second example, the BB84 protocol with our proposed processing yields a positive key rate even though the so-called error rate is higher than the 25% limit.

Shun Watanabe; Ryutaroh Matsumoto; Tomohiko Uyematsu

2008-07-22T23:59:59.000Z

259

Rate controlling model for bioremediation of oil contaminated soil  

SciTech Connect (OSTI)

A mathematical model of bio-remediation of hydrocarbons in a soil matrix has been developed to predict the rate controlling step and the remediation rate during the bioremediation of a contaminated soil. The model is based on mass transfer of oxygen and oil into the aqueous solution in the soil matrix and the biodegradation of the hydrocarbons in the aqueous solution. Monod's equation was used to describe the biodegradation rate in aqueous solution while the mass transfer equations were used to describe the mass transfer rates of oxygen and oil in the soil matrix. Results from model calculations indicate that the bio-remediation rate increases and approaches a limiting value when one of the rates becomes controlling. When the parameters of the site soil samples are measured and the solubilities of oxygen and oil in aqueous solution are obtained, the bioremediation rate can be predicted by this model. The rate controlling step of the bioremediation site may be identified quickly and steps to improve the bioremediation rate can be recommended. 8 refs., 7 figs.

Li, K.Y.; Annamali, S.N.; Hopper, J.R. (Lamar Univ., Beaumont, TX (United States))

1993-11-01T23:59:59.000Z

260

Scaling of the magnetic reconnection rate with symmetric shear flow  

SciTech Connect (OSTI)

The scaling of the reconnection rate during (fast) Hall magnetic reconnection in the presence of an oppositely directed bulk shear flow parallel to the reconnecting magnetic field is studied using two-dimensional numerical simulations of Hall reconnection with two different codes. Previous studies noted that the reconnection rate falls with increasing flow speed and shuts off entirely for super-Alfvenic flow, but no quantitative expression for the reconnection rate in sub-Alfvenic shear flows is known. An expression for the scaling of the reconnection rate is presented.

Cassak, P. A. [Department of Physics, West Virginia University, Morgantown, West Virginia 26506 (United States); Otto, A. [Geophysical Institute, University of Alaska-Fairbanks, Fairbanks, Alaska 99775 (United States)

2011-07-15T23:59:59.000Z

Note: This page contains sample records for the topic "rating cancel rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Construction, Qualification, and Low Rate Production Start-up...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Manufacturing Facility with Capacity to Support 100,000 Electric Drive Vehicles Construction, Qualification, and Low Rate Production Start-up of a DC Bus Capacitor High Volume...

262

Certification and Rating of Attachments for Fenestration Technologies...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

rate fenestration attachment energy performance and provide accurate and useful product comparison criteria, allowing end users in residential and commercial markets to assess...

263

agitation rating scale: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

observations by combining two concepts: the impact of cell sizes on metabolic rate and fractal-like (hierarchical) organization. The proposed model both theoretically and...

264

activation analysis rates: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

pressure signal. Although it is known rate analysis often replaces electrocardiogram (ECG) devices with the advantage that it does a device, worn at the wrist for a great...

265

John S. Wright Forestry Center Room Sizes, Capacities, and Rates  

E-Print Network [OSTI]

Appendix 1 John S. Wright Forestry Center Room Sizes, Capacities, and Rates Room College the Wright Center contact: Marlene Mann, Administrative Assistant Forestry and Natural Resources Voice: 765

266

Colorado State University Mail Services DOMESTIC & INTERNATIONAL POSTAGE RATES January 26  

E-Print Network [OSTI]

Colorado State University ­ Mail Services DOMESTIC & INTERNATIONAL POSTAGE RATES January 26 th Flat Rate Envelope $5.60 Legal Flat Rate Envelope $5.75 Padded Flat Rate Envelope $5.95 Small Flat Rate Box $5.80 Medium Flat Rate Box $12.35 Large Flat Rate Box $17.45 APO/FPO Large Flat Rate Box $15

267

E-Print Network 3.0 - accelerated evolutionary rate Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

rate Search Powered by Explorit Topic List Advanced Search Sample search results for: accelerated evolutionary rate...

268

E-Print Network 3.0 - accelerated evolutionary rates Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

rates Search Powered by Explorit Topic List Advanced Search Sample search results for: accelerated evolutionary rates...

269

Charged-Particle Thermonuclear Reaction Rates: II. Tables and Graphs of Reaction Rates and Probability Density Functions  

E-Print Network [OSTI]

Numerical values of charged-particle thermonuclear reaction rates for nuclei in the A=14 to 40 region are tabulated. The results are obtained using a method, based on Monte Carlo techniques, that has been described in the preceding paper of this series (Paper I). We present a low rate, median rate and high rate which correspond to the 0.16, 0.50 and 0.84 quantiles, respectively, of the cumulative reaction rate distribution. The meaning of these quantities is in general different from the commonly reported, but statistically meaningless expressions, "lower limit", "nominal value" and "upper limit" of the total reaction rate. In addition, we approximate the Monte Carlo probability density function of the total reaction rate by a lognormal distribution and tabulate the lognormal parameters {\\mu} and {\\sigma} at each temperature. We also provide a quantitative measure (Anderson-Darling test statistic) for the reliability of the lognormal approximation. The user can implement the approximate lognormal reaction rate probability density functions directly in a stellar model code for studies of stellar energy generation and nucleosynthesis. For each reaction, the Monte Carlo reaction rate probability density functions, together with their lognormal approximations, are displayed graphically for selected temperatures in order to provide a visual impression. Our new reaction rates are appropriate for bare nuclei in the laboratory. The nuclear physics input used to derive our reaction rates is presented in the subsequent paper of this series (Paper III). In the fourth paper of this series (Paper IV) we compare our new reaction rates to previous results.

Christian Iliadis; Richard Longland; Art Champagne; Alain Coc; Ryan Fitzgerald

2010-04-23T23:59:59.000Z

270

Heart-Rate Pacing Simulation and Control via Multiagent Systems  

E-Print Network [OSTI]

Heart-Rate Pacing Simulation and Control via Multiagent Systems Alessandro Beda 1 and Nicola Gatti system of heart rate, but the results are so poor that the use of such models in commercial pacemakers evaluation. In litera- ture several techniques are adopted to combine models; for instance, in heart

Gatti, Nicola

271

PROCEEDINGS OF THE PELAGIC LONGLINE CATCH RATE STANDARDIZATION MEETING  

E-Print Network [OSTI]

PROCEEDINGS OF THE PELAGIC LONGLINE CATCH RATE STANDARDIZATION MEETING February 12-16, 2007 Imin;#12;Pelagic longline catch rate standardization meeting, Feb 2007 Table of Contents Introduction........................................................................................................... 6 1. Overview of longline effort standardizations in current Pacific HMS assessments... 6 2. Models

Hawai'i at Manoa, University of

272

Oil production models with normal rate curves Dudley Stark  

E-Print Network [OSTI]

Oil production models with normal rate curves Dudley Stark School of Mathematical Sciences Queen;Abstract The normal curve has been used to fit the rate of both world and U.S.A. oil production. In this paper we give the first theoretical basis for these curve fittings. It is well known that oil field

Stark, Dudley

273

Upscaling geochemical reaction rates using pore-scale network modeling  

E-Print Network [OSTI]

. To examine the scaling behavior of reaction kinetics, these continuum-scale rates from the network model as a valuable research tool for examining upscaling of geochemical kinetics. The pore-scale model allowsUpscaling geochemical reaction rates using pore-scale network modeling Li Li, Catherine A. Peters

Peters, Catherine A.

274

Extinction rates under nonrandom patterns of habitat loss  

E-Print Network [OSTI]

conversion on species extinctions assume that habitat conversion occurs at ran- dom. This assumption allows predictions about extinction rates based on the species­area relationship. We show that the spatially compositional gradients, or species richness, also alter pre- dicted species extinction rates. We illustrate

275

Weathering rates of marble in laboratory and outdoor conditions  

SciTech Connect (OSTI)

In the modern urban atmosphere SO{sub 2} and NO{sub 2} attack calcite (CaCO{sub 3}) in marble exposed at rain-sheltered surfaces creating largely gypsum (CaSO{sub 4}{center_dot}2H{sub 2}O) crusts that eventually exfoliate. In combination with CO{sub 2} these gases erode the marble at unsheltered surfaces. the authors report the development of mathematical models to predict the rate of growth of crust and the rate of surface recession. To determine the rate of growth of crust the kinetic rate constant, diffusion rate, and the order of reaction were determined by the application of the shrinking-core model applied to data generated in laboratory experiments. Based on these parameters /and average ambient levels of 10 parts per billion (ppb) SO{sub 2} and 25 ppb NO{sub 2} in Louisville, Ky., the rate of crust formation for this metro area was calculated to be 1.8 {micro}m in the first year. However, the rate of recession was modeled from data obtained by exposing marble slabs to rainfalls. A surface recession of 15 {micro}m/yr was calculated. The models predicted well the rate of growth of crust observed at several sites in Louisville and the predicted surface recession compared well with values reported in the literature.

Yerrapragada, S.S.; Chirra, S.R.; Jaynes, J.H.; Bandyopadhyay, J.K.; Gauri, K.L. [Univ of Louisville, KY (United States); Li, S. [Metro Services Lab., Louisville, KY (United States)

1996-09-01T23:59:59.000Z

276

November 2005 Deforestation and the Real Exchange Rate  

E-Print Network [OSTI]

November 2005 Deforestation and the Real Exchange Rate Abstract Deforestation is a phenomenon of deforestation that focuses on the factors a¤ecting the incen- tives to transform forested land into agricultural land. We show that: (i) lower discount rates and stronger institutions decrease deforestation; (ii

Paris-Sud XI, Université de

277

Demonstration of Reduced Airport Congestion through Pushback Rate Control  

E-Print Network [OSTI]

of a congestion control strategy at Boston Logan International Airport. The approach determines a suggested rate Control Demonstration at Boston Logan International Airport (BOS) was to show that a significant portionDemonstration of Reduced Airport Congestion through Pushback Rate Control Ioannis Simaiakis

Gummadi, Ramakrishna

278

Service Differentiation in Multi-Rate HSDPA Systems  

E-Print Network [OSTI]

--In multi-rate cellular transmission systems, users with different Quality of Service (QoS) requirements for the uplink (HSUPA). These wireless transmission technologies promise enhanced data rates for mobile Internet layer transmission [18]. CDMA is a clever modulation scheme that allows multiple users to transmit

Williamson, Carey

279

Adult Football Helmet Detailed Ratings Riddell Revolution Speed  

E-Print Network [OSTI]

Adult Football Helmet Detailed Ratings May 2011 Riddell Revolution Speed Helmet ID SPEED1 SPEED2: A total of 10 adult football helmet models were evaluated using the STAR evaluation system for May 2011.397 0.350 0.322 Overall STAR 0.356 Very Good: Adult Football Helmet Detailed Ratings May 2011 #12

Lu, Chang

280

RATE DISTORTION OPTIMIZED DOCUMENT CODING USING RESOLUTION ENHANCED RENDERING  

E-Print Network [OSTI]

RATE DISTORTION OPTIMIZED DOCUMENT CODING USING RESOLUTION ENHANCED RENDERING Guotong Feng , Hui at a fixed bit rate. This method, which we call resolution enhanced rendering (RER), works by adaptively enhanced rendering (RER) for jointly optimizing the THIS WORK IS SUPPORTED BY THE XEROX FOUNDATION. MRC

Note: This page contains sample records for the topic "rating cancel rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Interest Rate Clustering in UK Financial Services Markets  

E-Print Network [OSTI]

interest rate setting differs from previous empirical work examining the topic. It has been common1 Interest Rate Clustering in UK Financial Services Markets by John K. Ashton Norwich Business University Business School CCP Working Paper 06-14 Abstract: In applications as diverse as banking

Feigon, Brooke

282

Wall recession rates in cavity-growth modeling  

SciTech Connect (OSTI)

The predictions of resource utilization obtained from cavity-growth models depend on the methods used to represent the recession rates of the walls of the cavity. Under many circumstances the cavity is largely filled with a bed char rubble. Examination of the mechanisms for recession at walls adjacent to these char beds indicates that the recession rates are controlled by convective heat transfer from the bed to the walls coupled with the thermomechanical breakdown of the walls. A recession-rate representation has been developed, based on this concept, for use in cavity-growth simulation programs. This representation characterizes wall breakdown by either a failure temperature or by a thickness of char layer at failure, and determines rates from a model of heat transfer under these conditions. It gives recession rates that are functions of gas temperature and mass flow rate in the cavity, and depend on effective particle size in the char bed. Wall recession rates calculated for WIDCO, Hoe Creek, and Hanna coals are in the range of 0.1 to 0.8 m/day at a 1300 K cavity temperature, and are consistent with the general rates observed for field tests. 27 references, 10 figures, 1 table.

Grens, E.A. II; Thorsness, C.B.

1984-08-01T23:59:59.000Z

283

Cosmic Supernova Rate History and Type Ia Supernova Progenitors  

E-Print Network [OSTI]

Adopting a single degenerate scenario for Type Ia supernova progenitors with the metallicity effect, we make a prediction of the cosmic supernova rate history as a composite of the supernova rates in spiral and elliptical galaxies, and compare with the recent observational data up to z ~ 0.55.

Chiaki Kobayashi; Ken'ichi Nomoto; Takuji Tsujimoto

2001-02-14T23:59:59.000Z

284

Adaptive Rate Stream Processing for Smart Grid Applications on Clouds  

E-Print Network [OSTI]

Adaptive Rate Stream Processing for Smart Grid Applications on Clouds Yogesh Simmhan University within a smart (power) grid are providing utilities and power systems researchers with unprecedentedEngineering applications in the smart grid domain. One unique aspect of our work is the use of adaptive rate control

Prasanna, Viktor K.

285

MINNESOTA ROAD FEE TEST MILEAGE BASED USER FEE RATE  

E-Print Network [OSTI]

Policy Center Oregon Road User Fee Pilot Program Other Interest: Nevada, Texas, Ohio, Idaho, etc. May Cellular Tower Data Warehouse May 24, 2012 6 #12;Determination of Mileage Fees · MBUF Rate StructureMINNESOTA ROAD FEE TEST MILEAGE BASED USER FEE RATE STRUCTURE CONCEPT 23rd Annual Transportation

Minnesota, University of

286

Statistical Methods for Thermonuclear Reaction Rates and Nucleosynthesis Simulations  

E-Print Network [OSTI]

Rigorous statistical methods for estimating thermonuclear reaction rates and nucleosynthesis are becoming increasingly established in nuclear astrophysics. The main challenge being faced is that experimental reaction rates are highly complex quantities derived from a multitude of different measured nuclear parameters (e.g., astrophysical S-factors, resonance energies and strengths, particle and gamma-ray partial widths). We discuss the application of the Monte Carlo method to two distinct, but related, questions. First, given a set of measured nuclear parameters, how can one best estimate the resulting thermonuclear reaction rates and associated uncertainties? Second, given a set of appropriate reaction rates, how can one best estimate the abundances from nucleosynthesis (i.e., reaction network) calculations? The techniques described here provide probability density functions that can be used to derive statistically meaningful reaction rates and final abundances for any desired coverage probability. Examples ...

Iliadis, Christian; Coc, Alain; Timmes, F X; Champagne, Art E

2014-01-01T23:59:59.000Z

287

Energy levels, radiative rates and electron impact excitation rates for transitions in C III  

E-Print Network [OSTI]

We report energy levels, radiative rates (A-values) and lifetimes for the astrophysically-important Be-like ion C III. For the calculations, 166 levels belonging to the $n \\le$ 5 configurations are considered and the {\\sc grasp} (General-purpose Relativistic Atomic Structure Package) is adopted. Einstein A-coefficients are provided for all E1, E2, M1 and M2 transitions, while lifetimes are compared with available measurements as well as theoretical results, and no large discrepancies noted. Our energy levels are assessed to be accurate to better than 1\\% for a majority of levels, and A-values to better than 20\\% for most transitions. Collision strengths are also calculated, for which the Dirac Atomic R-matrix Code ({\\sc darc}) is used. A wide energy range, up to 21 Ryd, is considered and resonances resolved in a fine energy mesh in the thresholds region. The collision strengths are subsequently averaged over a Maxwellian velocity distribution to determine effective collision strengths up to a temperature of 8...

Aggarwal, K M

2015-01-01T23:59:59.000Z

288

Multi-UAV Network Control through Dynamic Task Allocation: Ensuring Data-Rate and Bit-Error-Rate Support  

E-Print Network [OSTI]

Multi-UAV Network Control through Dynamic Task Allocation: Ensuring Data-Rate and Bit-Error-Rate Support Andrew Kopeikin, Sameera S. Ponda, Luke B. Johnson, and Jonathan P. How Abstract-- A multi-UAV distributed task allocation to engage under-utilized UAVs to serve as communication relays and to ensure

How, Jonathan P.

289

FY 2015 -Rates for Self-Sustaining Services Rates are contingent upon approval by UW Management Accounting & Analysis.  

E-Print Network [OSTI]

Pager Feature - Group Call Retiring $2.30 Group Monthly Mobile Technology Basic Smartphone Support - iFY 2015 - Rates for Self-Sustaining Services Rates are contingent upon approval by UW Management Nebula Managed Desktop $36.50 $39.90 Computer Monthly Nebula Hourly Support $109.00 $109.00 Hour Each

Kaminsky, Werner

290

Properties of water surface discharge at different pulse repetition rates  

SciTech Connect (OSTI)

The properties of water surface discharge plasma for variety of pulse repetition rates are investigated. A magnetic pulse compression (MPC) pulsed power modulator able to deliver pulse repetition rates up to 1000?Hz, with 0.5?J per pulse energy output at 25?kV, was used as the pulsed power source. Positive pulse with a point-to-plane electrode configuration was used for the experiments. The concentration and production yield of hydrogen peroxide (H{sub 2}O{sub 2}) were quantitatively measured and orange II organic dye was treated, to evaluate the chemical properties of the discharge reactor. Experimental results show that the physical and chemical properties of water surface discharge are not influenced by pulse repetition rate, very different from those observed for under water discharge. The production yield of H{sub 2}O{sub 2} and degradation rate per pulse of the dye did not significantly vary at different pulse repetition rates under a constant discharge mode on water surface. In addition, the solution temperature, pH, and conductivity for both water surface and underwater discharge reactors were measured to compare their plasma properties for different pulse repetition rates. The results confirm that surface discharge can be employed at high pulse repetition rates as a reliable and advantageous method for industrial and environmental decontamination applications.

Ruma,; Yoshihara, K. [Graduate School of Science and Technology, Kumamoto University, Kumamoto 860-8555 (Japan); Hosseini, S. H. R., E-mail: hosseini@kumamoto-u.ac.jp; Sakugawa, T.; Akiyama, H. [Graduate School of Science and Technology, Kumamoto University, Kumamoto 860-8555 (Japan); Institute of Pulsed Power Science, Kumamoto University, Kumamoto 860-8555 (Japan); Akiyama, M. [Department of Electrical and Electronic Engineering, Kagoshima University, Kagoshima 890-0065 (Japan); Lukeš, P. [Institute of Plasma Physics, AS CR, Prague, Prague 18200 (Czech Republic)

2014-09-28T23:59:59.000Z

291

Evolution of Massive Protostars with High Accretion Rates  

E-Print Network [OSTI]

Formation of massive stars by accretion requires a high accretion rate of > 10^-4 M_sun/yr to overcome the radiation pressure barrier of the forming stars. Here, we study evolution of protostars accreting at such high rates, by solving the structure of the central star and the inner accreting envelope simultaneously. The protostellar evolution is followed starting from small initial cores until their arrival at the stage of the Zero-Age Main Sequence (ZAMS) stars. An emphasis is put on evolutionary features different from those with a low accretion rate of 10^-5 M_sun/yr, which is presumed in the standard scenario for low-mass star formation. With the high accretion rate of 10^-3 M_sun/yr, the protostellar radius becomes very large and exceeds 100 R_sun. It is not until the stellar mass reaches 40 M_sun that hydrogen burning begins and the protostar reaches the ZAMS phase, and this ZAMS arrival mass increases with the accretion rate. At a very high accretion rate of > 3 x 10^-3 M_sun/yr, the total luminosity of the protostar becomes so high that the resultant radiation pressure inhibits the growth of the protostars under steady accretion before reaching the ZAMS stage. Therefore, the evolution under the critical accretion rate 3 x 10^-3 M_sun/yr gives the upper mass limit of possible pre-main-sequence stars at 60 M_sun. The upper mass limit of MS stars is also set by the radiation pressure onto the dusty envelope under the same accretion rate at 250 M_sun. We also propose that the central source enshrouded in the Orion KL/BN nebula has effective temperature and luminosity consistent with our model, and is a possible candidate for such protostars growing under the high accretion rate. (abridged)

Takashi Hosokawa; Kazuyuki Omukai

2008-06-25T23:59:59.000Z

292

Standby Rates for Combined Heat and Power Systems  

SciTech Connect (OSTI)

Improvements in technology, low natural gas prices, and more flexible and positive attitudes in government and utilities are making distributed generation more viable. With more distributed generation, notably combined heat and power, comes an increase in the importance of standby rates, the cost of services utilities provide when customer generation is not operating or is insufficient to meet full load. This work looks at existing utility standby tariffs in five states. It uses these existing rates and terms to showcase practices that demonstrate a sound application of regulatory principles and ones that do not. The paper also addresses areas for improvement in standby rates.

Sedano, Richard [Regulatory Assistance Partnership; Selecky, James [Brubaker & Associates, Inc.; Iverson, Kathryn [Brubaker & Associates, Inc.; Al-Jabir, Ali [Brubaker & Associates, Inc.

2014-02-01T23:59:59.000Z

293

Solidification at the High and Low Rate Extreme  

SciTech Connect (OSTI)

The microstructures formed upon solidification are strongly influenced by the imposed growth rates on an alloy system. Depending on the characteristics of the solidification process, a wide range of growth rates is accessible. The prevailing solidification mechanisms, and thus the final microstructure of the alloy, are governed by these imposed growth rates. At the high rate extreme, for instance, one can have access to novel microstructures that are unattainable at low growth rates. While the low growth rates can be utilized for the study of the intrinsic growth behavior of a certain phase growing from the melt. Although the length scales associated with certain processes, such as capillarity, and the diffusion of heat and solute, are different at low and high rate extremes, the phenomena that govern the selection of a certain microstructural length scale or a growth mode are the same. Consequently, one can analyze the solidification phenomena at both high and low rates by using the same governing principles. In this study, we examined the microstructural control at both low and high extremes. For the high rate extreme, the formation of crystalline products and factors that control the microstructure during rapid solidification by free-jet melt spinning are examined in Fe-Si-B system. Particular attention was given to the behavior of the melt pool at different quench-wheel speeds. Since the solidification process takes place within the melt-pool that forms on the rotating quench-wheel, we examined the influence of melt-pool dynamics on nucleation and growth of crystalline solidification products and glass formation. High-speed imaging of the melt-pool, analysis of ribbon microstructure, and measurement of ribbon geometry and surface character all indicate upper and lower limits for melt-spinning rates for which nucleation can be avoided, and fully amorphous ribbons can be achieved. Comparison of the relevant time scales reveals that surface-controlled melt-pool oscillation may be the dominant factor governing the onset of unsteady thermal conditions accompanied by varying amounts of crystalline nucleation observed near the lower limit. At high quench-wheel velocities, the influence of these oscillations is minimal due to very short melt-pool residence times. However, microstructural evidence suggests that the entrapment of gas pockets at the wheel-metal interface plays a critical role in establishing the upper rate limit. An observed transition in wheel-side surface character with increasing melt-spinning rate supports this conclusion.

Halim Meco

2004-12-19T23:59:59.000Z

294

Evaluation of Instrumentation and Dynamic Thermal Ratings for Overhead Lines  

SciTech Connect (OSTI)

In 2010, a project was initiated through a partnership between the Department of Energy (DOE) and the New York Power Authority (NYPA) to evaluate EPRI?s rating technology and instrumentation that can be used to monitor the thermal states of transmission lines and provide the required real-time data for real-time rating calculations. The project included the installation and maintenance of various instruments at three 230 kV line sites in northern New York. The instruments were monitored, and data collection and rating calculations were performed for about a three year period.

Phillips, A.

2013-01-31T23:59:59.000Z

295

The Chern-Simons diffusion rate from higher curvature gravity  

E-Print Network [OSTI]

An important transport coefficient in the study of non-Abelian plasmas is the Chern-Simons diffusion rate, which parameterizes the rate of transition among the degenerate vacua of a gauge theory. We compute this quantity at strong coupling, via holography, using two theories of gravity with higher curvature corrections, namely Gauss-Bonnet gravity and quasi-topological gravity. We find that these corrections may either increase or decrease the result obtained from Einstein's gravity, depending on the value of the couplings. The Chern-Simons diffusion rate for Gauss-Bonnet gravity decreases as the shear viscosity over entropy ratio is increased.

Viktor Jahnke; Anderson Seigo Misobuchi; Diego Trancanelli

2014-03-13T23:59:59.000Z

296

Quantized Media with Absorptive Scatterers and Modified Atomic Emission Rates  

E-Print Network [OSTI]

Modifications in the spontaneous emission rate of an excited atom that are caused by extinction effects in a nearby dielectric medium are analyzed in a quantummechanical model, in which the medium consists of spherical scatterers with absorptive properties. Use of the dyadic Green function of the electromagnetic field near a a dielectric sphere leads to an expression for the change in the emission rate as a series of multipole contributions for which analytical formulas are obtained. The results for the modified emission rate as a function of the distance between the excited atom and the dielectric medium show the influence of both absorption and scattering processes.

L. G. Suttorp; A. J. van Wonderen

2011-02-14T23:59:59.000Z

297

Migrant Remittances and Exchange Rate Regimes in the Developing World  

E-Print Network [OSTI]

This article argues that the international financial consequences of immigration exert a substantial influence on the choice of exchange rate regimes in the developing world. Over the past two decades, migrant remittances ...

Singer, David Andrew

298

Figure 6. Projected Production for the Low Development Rate of...  

U.S. Energy Information Administration (EIA) Indexed Site

Low Development Rate of Technically Recoverable Oil Estimated at 5 Percent, Mean, and 95 Percent Probabilities for the ANWR Coastal Plain of the Alaska North Slope fig6.jpg (41132...

299

Figure 7. Projected Production for the High Development Rate...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Rate of Technically Recoverable Oil Estimated at 5 Percent, Mean, and 95 Percent Probabilities for the ANWR Coastal Plain of the Alaska North Slope fig7.jpg (43335 bytes) Source...

300

The impact of lead time on truckload transportation rates  

E-Print Network [OSTI]

The objective of this thesis was to analyze truckload shipment transactions in order to determine if rates are impacted by tender lead time, which is the amount of time between when a carrier is offered a load to when the ...

Caldwell, Erik R. (Erik Russell)

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "rating cancel rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Optimization of time-based rates in forward energy markets  

E-Print Network [OSTI]

This paper presents a new two-step design approach of Time-Based Rate (TBR) programs for markets with a high penetration of variable energy sources such as wind power. First, an optimal market time horizon must be determined ...

Wang, J.

302

Dimensional analysis of heart rate variability in heart transplant recipients  

SciTech Connect (OSTI)

We discuss periodicities in the heart rate in normal and transplanted hearts. We then consider the possibility of dimensional analysis of these periodicities in transplanted hearts and problems associated with the record.

Zbilut, J.P.; Mayer-Kress, G.; Geist, K.

1987-01-01T23:59:59.000Z

303

Currency Unions, Product Introductions, and the Real Exchange Rate  

E-Print Network [OSTI]

We use a novel data set of online prices of identical goods sold by four large global retailers in dozens of countries to study good-level real exchange rates and their aggregated behavior. First, in contrast to the prior ...

Cavallo, Alberto F.

304

Characteristics of spot-market rate indexes for truckload transportation  

E-Print Network [OSTI]

In the truckload transportation industry in the United States, a number of indexes are published that attempt to measure changes in rates, but no single index has emerged as an industry standard. Industry participants, ...

Bignell, Andrew (Andrew Souglas)

2013-01-01T23:59:59.000Z

305

On the maximum pressure rise rate in boosted HCCI operation  

E-Print Network [OSTI]

This paper explores the combined effects of boosting, intake air temperature, trapped residual gas fraction, and dilution on the Maximum Pressure Rise Rate (MPRR) in a boosted single cylinder gasoline HCCI engine with ...

Wildman, Craig B.

306

Nuclear astrophysical plasmas: ion distribution functions and fusion rates  

E-Print Network [OSTI]

This article illustrates how very small deviations from the Maxwellian exponential tail, while leaving unchanged bulk quantities, can yield dramatic effects on fusion reaction rates and discuss several mechanisms that can cause such deviations.

Marcello Lissia; Piero Quarati

2005-11-15T23:59:59.000Z

307

Nonlinear stochastic growth rates and redshift space distortions  

E-Print Network [OSTI]

The linear growth rate is commonly defined through a simple deterministic relation between the velocity divergence and the matter overdensity in the linear regime. Here we introduce a formalism that extends this to a nonlinear, stochastic relation between $\\theta = \

Jennings, Elise

2015-01-01T23:59:59.000Z

308

Construction, Qualification, and Low Rate Production Start-up...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

of a DC Bus Capacitor High Volume Manufacturing Facility with Capacity to Support 100,000 Electric Drive Vehicles Construction, Qualification, and Low Rate Production Start-up of a...

309

Cross section dependence of event rates at neutrino telescopes  

E-Print Network [OSTI]

We examine the dependence of event rates at neutrino telescopes on the neutrino-nucleon cross section for neutrinos with energy above 1 PeV, and contrast the results with those for cosmic ray experiments. Scaling of the ...

Marfatia, Danny; Seckel, D.; McKay, D. W.; Hussain, S.

2006-10-20T23:59:59.000Z

310

Pressure Normalization of Production Rates Improves Forecasting Results  

E-Print Network [OSTI]

. However, these new decline curve analysis (DCA) methods are still based only on production rate data, relying on the assumption of stable flowing pressure. Since this stabilized state is not reached rapidly in most cases, the applicability of these methods...

Lacayo Ortiz, Juan Manuel

2013-08-07T23:59:59.000Z

311

Materials Science Under Extreme Conditions of Pressure and Strain Rate  

E-Print Network [OSTI]

at Lawrence Livermore National Laboratory. I. INTRODUCTION HIGH-STRAIN-RATE materials dynamics and solid-state experiments to much higher pressures, P 103 GPa (10 Mbar), on the National Ignition Facility (NIF) laser

Zhigilei, Leonid V.

312

Characterization of biodegradation rates of separated diesel components  

E-Print Network [OSTI]

. Studies with complex mixtures, like whole fuels, have shown that hydrocarbons in petroleum do not follow a simple degradation sequence and the biodegradation rates of specific compounds vary among fuels (Elmendorf, 1994, Mulikins-Phillips and Stewart 1974...

Olson, Jennifer Jean

1997-01-01T23:59:59.000Z

313

THE UNIVERSITY OF RHODE ISLAND FRINGE BENEFIT AVERAGE RATE  

E-Print Network [OSTI]

THE UNIVERSITY OF RHODE ISLAND FRINGE BENEFIT AVERAGE RATE FY 2015 Allocation Cost or Classified.2% URI Budget & Financial Planning Office 9.17.14 Office:fringebenefits:office of sponsored projects: FY2015 Allocation #12;

Rhode Island, University of

314

Dose Rate Calculations for Rotary Mode Core Sampling Exhauster  

E-Print Network [OSTI]

This document provides the calculated estimated dose rates for three external locations on the Rotary Mode Core Sampling (RMCS) exhauster HEPA filter housing, per the request of Characterization Field Engineering.

Foust, D J

2000-01-01T23:59:59.000Z

315

Longshore sediment transport rate calculated incorporating wave orbital velocity fluctuations  

E-Print Network [OSTI]

Laboratory experiments were performed to study and improve longshore sediment transport rate predictions. Measured total longshore transport in the laboratory was approximately three times greater for plunging breakers than spilling breakers. Three...

Smith, Ernest Ray

2006-10-30T23:59:59.000Z

316

How Well Do Social Ratings Actually Measure Corporate Social Responsibility?*  

E-Print Network [OSTI]

environmental strengths, in contrast, do not accurately predict pollution levels or compliance violations. Levine Haas School of Business University of California at Berkeley 545 Student Services Building #1900 Responsibility? Abstract: Ratings of corporations' environmental activities and capabilities influence billions

Sadoulet, Elisabeth

317

adenoma detection rates: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Astrophysics (arXiv) Summary: The event rates for the direct detection of dark matter for various types of WIMPs are presented. In addition to the neutralino of SUSY...

318

affects detection rate: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Astrophysics (arXiv) Summary: The event rates for the direct detection of dark matter for various types of WIMPs are presented. In addition to the neutralino of SUSY...

319

Simplified motional heating rate measurements of trapped ions  

E-Print Network [OSTI]

We have measured motional heating rates of trapped atomic ions, a factor that can influence multi-ion quantum logic gate fidelities. Two simplified techniques were developed for this purpose: one relies on Raman sideband detection implemented with a single laser source, while the second is even simpler and is based on time-resolved fluorescence detection during Doppler recooling. We applied these methods to determine heating rates in a microfrabricated surface-electrode trap made of gold on fused quartz, which traps ions 40 microns above its surface. Heating rates obtained from the two techniques were found to be in reasonable agreement. In addition, the trap gives rise to a heating rate of 300 plus or minus 30 per second for a motional frequency of 5.25 MHz, substantially below the trend observed in other traps.

Epstein, R J; Leibfried, D; Wesenberg, J H; Bollinger, J J; Amini, J M; Blakestad, R B; Britton, J; Home, J P; Itano, W M; Jost, J D; Knill, E; Langer, C; Ozeri, R; Shiga, N; Wineland, D J

2007-01-01T23:59:59.000Z

320

astrophysical reaction rate: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Workshop on Thermonuclear Reaction Rates for Astrophysics Applications Computer Technologies and Information...

Note: This page contains sample records for the topic "rating cancel rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

astrophysical reaction rates: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Workshop on Thermonuclear Reaction Rates for Astrophysics Applications Computer Technologies and Information...

322

activation reaction rate: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 On thermonuclear reaction rates Astrophysics (arXiv) Summary: Nuclear reactions govern major...

323

HEADLINE: BPA RAISES RATES TO BOLSTER FEDERAL POWER AND TRANSMISSION...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Teresa Waugh, 503-230-7536 Doug Johnson, 503-230-5840 or 503-230-5131 BPA adopts new wholesale power and transmission rates Increases needed to sustain system value Portland, Ore....

324

Figure 3. Production Schedules at Two Development Rates  

Gasoline and Diesel Fuel Update (EIA)

3. Production Schedules at Two Development Rates for the 95 Percent Probability of Recovering 5.7 Billion Barrels of Technically Recoverable Oil from the ANWR Coastal Plain of...

325

Reconciling leptogenesis with observable mu --> e gamma rates  

E-Print Network [OSTI]

We perform a detailed analysis of thermal leptogenesis in the framework of seesaw models which approximately conserve lepton number. These models are known to allow for large Yukawa couplings and a low seesaw scale in agreement with neutrino mass constraints, and hence to lead to large lepton flavour violating rates that can be probed experimentally. Although large Yukawa couplings lead to (inverse) decay rates much larger than the Hubble expansion rate, we show that the leptogenesis washout induced is generically small if the mass splitting between the right-handed neutrinos is small enough. As a result, large lepton flavour violating rates are compatible with successful leptogenesis. We emphasize that this scenario does not require any particular flavour structure. A small splitting is natural and radiatively stable in this context because it is protected by the lepton number symmetry.

Steve Blanchet; Thomas Hambye; Francois-Xavier Josse-Michaux

2010-02-15T23:59:59.000Z

326

Figure 5. Production Schedules at Two Development Rates for the...  

Gasoline and Diesel Fuel Update (EIA)

5. Production Schedules at Two Development Rates for the 5 Percent Probability of Recovering 16.0 Billion Barrels of Technically Recoverable Oil from the ANWR Coastal Plain of...

327

igure 4. Production Schedules at Two Development Rates for the...  

Gasoline and Diesel Fuel Update (EIA)

4. Production Schedules at Two Development Rates for the Statistical Mean of Recovering 10.3 Billion Barrels of Technically Recoverable Oil from the ANWR Coastal Plain of Alaska...

328

Escape Rates of the Hénon-Heiles System  

E-Print Network [OSTI]

A particle in the H\\'enon-Heiles potential can escape when its energy is above the threshold value $E_{th}={1/6}$. We report a theoretical study on the the escape rates near threshold. We derived an analytic formula for the escape rate as a function of energy by exploring the property of chaos. We also simulated the escaping process by following the motions of a large number of particles. Two algorithms are employed to solve the equations of motion. One is the Runge-Kutta-Fehlberg method, and another is a recently proposed fourth order symplectic method. Our simulations show the escape of H$\\mathrm{\\acute{e}}$non-Heiles system follows exponential laws. We extracted the escape rates from the time dependence of particle numbers in the H$\\mathrm{\\acute{e}}$non-Heiles potential. The extracted escape rates agree with the analytic result.

H. J. Zhao; M. L. Du

2007-01-15T23:59:59.000Z

329

Does anyone have access to 2012 average residential rates by...  

Open Energy Info (EERE)

Does anyone have access to 2012 average residential rates by utility company? I'm seeing an inconsistency between the OpenEI website and EIA 861 data set. Home > Groups > Utility...

330

Considering removing "Show Preview" button on utility rate form...  

Open Energy Info (EERE)

Rmckeel's picture Submitted by Rmckeel(297) Contributor 22 April, 2013 - 13:55 Utility Rates I'm considering removing the "Show Preview" button, since it does not work (javascript...

331

Water Exchange Rates and Molecular Mechanism around Aqueous Halide Ions  

SciTech Connect (OSTI)

Molecular dynamics simulations were performed to systematically study the water-exchange mechanism around aqueous chloride, bromide, and iodide ions. Transition state theory, Grote-Hynes theory, and the reactive flux method were employed to compute water exchange rates. We computed the pressure dependence of rate constants and the corresponding activation volumes to investigate the mechanism of the solvent exchange event. The activation volumes obtained using the transition state theory rate constants are negative for all the three anions, thus indicating an associative mechanism. Contrary to the transition state theory results, activation volumes obtained using rate constants from Grote-Hynes theory and the reactive flux method are positive, thus indicating a dissociative mechanism. The Division of Chemical Sciences, Geosciences, and Biosciences, Office of Basic Energy Sciences (BES), of the U.S. Department of Energy (DOE) funded this work. Battelle operates Pacific Northwest National Laboratory for DOE. The calculations were carried out using computer resources provided by BES.

Annapureddy, Harsha V.; Dang, Liem X.

2014-07-17T23:59:59.000Z

332

Austin Energy- Value of Solar Residential Rate (Texas)  

Broader source: Energy.gov [DOE]

Austin Energy, the municipal utility of Austin Texas, offers the Value of Solar rate for residential solar photovoltaic (PV) systems. The Value of Solar tariff, designed by Austin Energy and...

333

User’s Guide for Getter Rate Test System  

SciTech Connect (OSTI)

This User’s Guide describes the operation and maintenance of the Getter Rate Test System, including the mechanical equipment, instrumentation, and datalogger/computer components. The Getter Rate Test System includes equipment and instrumentation to conduct two getter rate tests simultaneously. The mechanical equipment comprises roughing and high-vacuum pumps, heated test chambers, standard hydrogen leaks, and associated piping and valves. Instrumentation includes thermocouples, pressure (vacuum) transducers, panel displays, analog-to-digital signal converter, and associated wiring. The datalogger/computer is a stand-alone computer with installed software to allow the user to record data input from the pressure transducers to data files and to calculate the getter rate from the data in an Excel® spreadsheet.

Elmore, Monte R.

2007-06-27T23:59:59.000Z

334

Acoustic measurement of the Deepwater Horizon Macondo well flow rate  

E-Print Network [OSTI]

On May 31, 2010, a direct acoustic measurement method was used to quantify fluid leakage rate from the Deepwater Horizon Macondo well prior to removal of its broken riser. This method utilized an acoustic imaging sonar and ...

Camilli, Richard

335

Comparison of proton and neutron carrier removal rates  

SciTech Connect (OSTI)

Displacement damage induced carrier removal rates for proton irradiations in the energy range 10-175 MeV were compared to 1 MeV equivalent neutrons using power MOSFETs as a test vehicle. The results showed that, within experimental error, the degradation mechanisms were qualitatively similar and the ratio of proton to neutron carrier removal rates as a function of proton energy correlate with a calculation based on nonionization energy loss in silicon. For exposures under junction bias, p-type silicon was found to have a smaller carrier removal rate for both proton and neutron irradiations, whereas, for n-type silicon, junction bias had little effect on the carrier removal rate.

Pease, R.L.; Enlow, E.W.; Dinger, G.L.; Marshall, P.

1987-12-01T23:59:59.000Z

336

Comparison of two different rating programs for sustainable homes  

E-Print Network [OSTI]

This thesis compares two different rating programs for sustainable homes; The Code for Sustainable Homes in the United Kingdom, and LEED for Homes in the United States. The comparison is both in general and with respect ...

Bjarnadottir, Margret Halla

2009-01-01T23:59:59.000Z

337

Basal melt rates beneath Whillans Ice Stream, West Antarctica  

E-Print Network [OSTI]

Basal water lubricates and enables the fast flow of the West Antarctic ice streams which exist under low gravitational driving stress. Identification of sources and rates of basal meltwater production can provide insight into the dynamics of ice...

Beem, Lucas H.; Jezek, Ken C.; Van Der Veen, C. J.

2010-08-05T23:59:59.000Z

338

Multi-rate flowing Wellbore electric conductivity logging method  

SciTech Connect (OSTI)

The flowing wellbore electric conductivity logging method involves the replacement of wellbore water by de-ionized or constant-salinity water, followed by constant pumping with rate Q, during which a series of fluid electric conductivity logs are taken. The logs can be analyzed to identify depth locations of inflow, and evaluate the transmissivity and electric conductivity (salinity) of the fluid at each inflow point. The present paper proposes the use of the method with two or more pumping rates. In particular it is recommended that the method be applied three times with pumping rates Q, Q /2, and 2Q. Then a combined analysis of the multi-rate data allows an efficient means of determining transmissivity and salinity values of all inflow points along a well with a confidence measure, as well as their inherent or far-field pressure heads. The method is illustrated by a practical example.

Tsang, Chin-Fu; Doughty, Christine

2003-04-22T23:59:59.000Z

339

Behavior of the Escape Rate Function in Hyperbolic Dynamical Systems  

E-Print Network [OSTI]

For a fixed initial reference measure, we study the dependence of the escape rate on the hole for a smooth or piecewise smooth hyperbolic map. First, we prove the existence and Holder continuity of the escape rate for systems with small holes admitting Young towers. Then we consider general holes for Anosov diffeomorphisms, without size or Markovian restrictions. We prove bounds on the upper and lower escape rates using the notion of pressure on the survivor set and show that a variational principle holds under generic conditions. However, we also show that the escape rate function forms a devil's staircase with jumps along sequences of regular holes and present examples to elucidate some of the difficulties involved in formulating a general theory.

Demers, Mark

2011-01-01T23:59:59.000Z

340

Behavior of the Escape Rate Function in Hyperbolic Dynamical Systems  

E-Print Network [OSTI]

principle holds under generic conditions. However, we also show that the escape rate function forms a devil's staircase with jumps along sequences of regular holes and present examples to elucidate some

Demers, Mark

Note: This page contains sample records for the topic "rating cancel rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Subtypes of aggressive children based on parent ratings  

E-Print Network [OSTI]

The existence of subtypes of aggressive children based on their parents' ratings of their aggressive behavior was examined in this study. The subjects' raw scores from the Child Behavior Checklist (Achenbach & Edelbrock, 1991) were used to perform a...

Rodman, Jennifer K

2013-02-22T23:59:59.000Z

342

E-Print Network 3.0 - air ventilation rate Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of ventilation rates and CO2-concentrations... : ventilation rates, carbon dioxide, health effects, SBS-symptoms, air exchange rate, relative risks. 12;LBNL... not indicate...

343

High Pressure Burn Rate Measurements on an Ammonium Perchlorate Propellant  

SciTech Connect (OSTI)

High pressure deflagration rate measurements of a unique ammonium perchlorate (AP) based propellant are required to design the base burn motor for a Raytheon weapon system. The results of these deflagration rate measurements will be key in assessing safety and performance of the system. In particular, the system may experience transient pressures on the order of 100's of MPa (10's kPSI). Previous studies on similar AP based materials demonstrate that low pressure (e.g. P < 10 MPa or 1500 PSI) burn rates can be quite different than the elevated pressure deflagration rate measurements (see References and HPP results discussed herein), hence elevated pressure measurements are necessary in order understand the deflagration behavior under relevant conditions. Previous work on explosives have shown that at 100's of MPa some explosives will transition from a laminar burn mechanism to a convective burn mechanism in a process termed deconsolidative burning. The resulting burn rates that are orders-of-magnitude faster than the laminar burn rates. Materials that transition to the deconsolidative-convective burn mechanism at elevated pressures have been shown to be considerably more violent in confined heating experiments (i.e. cook-off scenarios). The mechanisms of propellant and explosive deflagration are extremely complex and include both chemical, and mechanical processes, hence predicting the behavior and rate of a novel material or formulation is difficult if not impossible. In this work, the AP/HTPB based material, TAL-1503 (B-2049), was burned in a constant volume apparatus in argon up to 300 MPa (ca. 44 kPSI). The burn rate and pressure were measured in-situ and used to calculate a pressure dependent burn rate. In general, the material appears to burn in a laminar fashion at these elevated pressures. The experiment was reproduced multiple times and the burn rate law using the best data is B = (0.6 {+-} 0.1) x P{sup (1.05{+-}0.02)} where B is the burn rate in mm/s and P is the pressure in units of MPa. Details of the experimental method, results and data analysis are discussed herein and briefly compared to other AP based materials that have been measured in this apparatus.

Glascoe, E A; Tan, N

2010-04-21T23:59:59.000Z

344

Ground-Based Remote Retrievals of Cumulus Entrainment Rates  

SciTech Connect (OSTI)

While fractional entrainment rates for cumulus clouds have typically been derived from airborne observations, this limits the size and scope of available data sets. To increase the number of continental cumulus entrainment rate observations available for study, an algorithm for retrieving them from ground-based remote sensing observations has been developed. This algorithm, called the Entrainment Rate In Cumulus Algorithm (ERICA), uses the suite of instruments at the Southern Great Plains (SGP) site of the United States Department of Energy's Atmospheric Radiation Measurement (ARM) Climate Research Facility as inputs into a Gauss-Newton optimal estimation scheme, in which an assumed guess of the entrainment rate is iteratively adjusted through intercomparison of modeled liquid water path and cloud droplet effective radius to their observed counterparts. The forward model in this algorithm is the Explicit Mixing Parcel Model (EMPM), a cloud parcel model that treats entrainment as a series of discrete entrainment events. A quantified value for measurement uncertainty is also returned as part of the retrieval. Sensitivity testing and information content analysis demonstrate the robust nature of this method for retrieving accurate observations of the entrainment rate without the drawbacks of airborne sampling. Results from a test of ERICA on three months of shallow cumulus cloud events show significant variability of the entrainment rate of clouds in a single day and from one day to the next. The mean value of 1.06 km-¹ for the entrainment rate in this dataset corresponds well with prior observations and simulations of the entrainment rate in cumulus clouds.

Wagner, Timothy J.; Turner, David D.; Berg, Larry K.; Krueger, Steven K.

2013-07-26T23:59:59.000Z

345

Measuring rates of outdoor airflow into HVAC systems  

SciTech Connect (OSTI)

During the last few years, new technologies have been introduced for measuring the flow rates of outside air into HVAC systems. This document describes one particular technology for measuring these airflows, a system and a related protocol developed to evaluate this and similar measurement technologies under conditions without wind, and the results of our evaluations. We conclude that the measurement technology evaluated can provide a reasonably accurate measurement of OA flow rate over a broad range of flow, without significantly increasing airflow resistance.

Fisk, William J.; Faulkner, David; Sullivan, Douglas P.; Delp, Woody

2002-10-01T23:59:59.000Z

346

QCD Jet Rates with the Inclusive Generalized kt Algorithms  

E-Print Network [OSTI]

We derive generating functions, valid to next-to-double logarithmic accuracy, for QCD jet rates according to the inclusive forms of the kt, Cambridge/Aachen and anti-kt algorithms, which are equivalent at this level of accuracy. We compare the analytical results with jet rates and average jet multiplicities from the SHERPA event generator, and study the transition between Poisson-like and staircase-like behaviour of jet ratios.

Erik Gerwick; Ben Gripaios; Steffen Schumann; Bryan Webber

2013-04-15T23:59:59.000Z

347

QKD with finite resources: secret key rates via Rényi entropies  

E-Print Network [OSTI]

A realistic Quantum Key Distribution (QKD) protocol necessarily deals with finite resources, such as the number of signals exchanged by the two parties. We derive a bound on the secret key rate which is expressed as an optimization problem over R\\'enyi entropies. Under the assumption of collective attacks by an eavesdropper, a computable estimate of our bound for the six-state protocol is provided. This bound leads to improved key rates in comparison to previous results.

Silvestre Abruzzo; Hermann Kampermann; Markus Mertz; Dagmar Bruß

2011-05-27T23:59:59.000Z

348

Theoretical mass loss rates of cool main-sequence stars  

E-Print Network [OSTI]

We develop a model for the wind properties of cool main-sequence stars, which comprises their wind ram pressures, mass fluxes, and terminal wind velocities. The wind properties are determined through a polytropic magnetised wind model, assuming power laws for the dependence of the thermal and magnetic wind parameters on the stellar rotation rate. We use empirical data to constrain theoretical wind scenarios, which are characterised by different rates of increase of the wind temperature, wind density, and magnetic field strength. Scenarios based on moderate rates of increase yield wind ram pressures in agreement with most empirical constraints, but cannot account for some moderately rotating targets, whose high apparent mass loss rates are inconsistent with observed coronal X-ray and magnetic properties. For fast magnetic rotators, the magneto-centrifugal driving of the outflow can produce terminal wind velocities far in excess of the surface escape velocity. Disregarding this aspect in the analyses of wind ram pressures leads to overestimations of stellar mass loss rates. The predicted mass loss rates of cool main-sequence stars do not exceed about ten times the solar value. Our results are in contrast with previous investigations, which found a strong increase of the stellar mass loss rates with the coronal X-ray flux. Owing to the weaker dependence, we expect the impact of stellar winds on planetary atmospheres to be less severe and the detectability of magnetospheric radio emission to be lower then previously suggested. Considering the rotational evolution of a one solar-mass star, the mass loss rates and the wind ram pressures are highest during the pre-main sequence phase.

V. Holzwarth; M. Jardine

2006-11-14T23:59:59.000Z

349

Investigation of the rate sensitivity of pseudo relative permeabilities  

E-Print Network [OSTI]

of hypothetical reservoir stratifications were considered. Cross-sectional simulation runs were made using each stratification case for a range of waterflood injection rates and endpoint mobility ratios. Dynamic pseudo relative permeabilities were calculated... , These dynamic pseudo relative permeabilities were developed for those reservoirs that do not satisfy the assumptions of the vertical equilibrium or viscous-dominated pKr models. For waterflooding a stratified oil reservoir, fluid flow rate (velocity...

Brittain, Charles Finney

1986-01-01T23:59:59.000Z

350

K West basin isolation barrier leak rate test  

SciTech Connect (OSTI)

This document establishes the procedure for performing the acceptance test on the two isolation barriers being installed in K West basin. This acceptance test procedure shall be used to: First establish a basin water loss rate prior to installation of the two isolation barriers between the main basin and the discharge chute in K-Basin West. Second, perform an acceptance test to verify an acceptable leakage rate through the barrier seals.

Whitehurst, R.; McCracken, K.; Papenfuss, J.N.

1994-10-31T23:59:59.000Z

351

Bone Cancer Rates in Dinosaurs Compared with Modern Vertebrates  

E-Print Network [OSTI]

Data on the prevalence of bone cancer in dinosaurs is available from past radiological examination of preserved bones. We statistically test this data for consistency with rates extrapolated from information on bone cancer in modern vertebrates, and find that there is no evidence of a different rate. Thus, this test provides no support for a possible role of ionizing radiation in the K-T extinction event.

L. C. Natarajan; A. L. Melott; B. M. Rothschild; L. D. Martin

2007-10-16T23:59:59.000Z

352

Aspects of coal pyrogenation with high heating rates  

SciTech Connect (OSTI)

The present paper describes the conversion of different rank coals into coke of required quality, influenced by heating rate variation. The study has been made for romanian coals and the imported coals too. Theoretical aspects of the coking process kinetics with special practical applications are shown. In Romania, classical coke making technology involves some theoretical and practical problems because of the local coal supply, weak in coking coals. Petrographical methods, as a complementary source of information for coking mechanisms understanding were used, for blends with high content of weakly coking coals. The results reveal the importance of rank and petrographical composition determinations for complex blends making. The paper continues previous studies of coke making kinetics, influenced by heating rate variation. On the basis of the relationship between coal charge composition and coke structure, including its use in the blast furnace, the influence of an increase in heating rate on the structure of the coke produced from different rank and petrographical composition coals, was studied. The heating rates ranged between 3 and 40 C/min. The structural changes produced during pyrogenation were more evident for the heating rates: 3, 6, 10 and 40 C/min. Table 2 reveals the optical aspects of coke matrix and inertinitic inclusions evolution, that is, the differences in structure arrangement by changing the plastic phase characteristics due to the increase in the heating rate.

Panaitescu, C.; Barca, F. [Politehnica Univ., Bucharest (Romania); Predeanu, G.; Albastroiu, P. [Metallurgical Research Inst., Bucharest (Romania)

1994-12-31T23:59:59.000Z

353

Upscaling Calcite Growth Rates From the Mesoscale to the Macroscale  

SciTech Connect (OSTI)

Quantitative prediction of mineral reaction rates in the subsurface remains a daunting task partly because a key parameter for macroscopic models, the reactive site density, is poorly constrained. Here we report atomic force microscopy (AFM) measurements on the calcite surface of monomolecular step densities, treated as equivalent to the reactive site density, as a function of aqueous calcium-to-carbonate ratio and saturation index. Data for the obtuse step orientation are combined with existing step velocity measurements to generate a model that predicts overall macroscopic calcite growth rates. The model is quantitatively consistent with several published macroscopic rates under a range of alkaline solution conditions, particularly for two of the most comprehensive data sets without the need for additional fit parameters. The model reproduces peak growth rates and its functional form is simple enough to be incorporated into reactive transport or other macroscopic models designed for predictions in porous media. However, it currently cannot model equilibrium, pH effects, and may overestimate rates at high aqueous calcium-to-carbonate ratios. The discrepancies in rates at high calcium-to-carbonate ratios may be due to differences in pre-treatment, such as exposing the seed material to SI 1.0 to generate/develop growth hillocks, or other factors.

Bracco, Jacquelyn N [ORNL; Stack, Andrew G [ORNL; Steefel, Carl I [Lawrence Berkeley National Laboratory (LBNL)

2013-01-01T23:59:59.000Z

354

Solar rotation rate and its gradients during cycle 23  

E-Print Network [OSTI]

Available helioseismic data now span almost the entire solar activity cycle 23 making it possible to study solar-cycle related changes of the solar rotation rate in detail. In this paper we study how the solar rotation rate, in particular, the zonal flows change with time. In addition to the zonal flows that show a well known pattern in the solar convection zone, we also study changes in the radial and latitudinal gradients of the rotation rate, particularly in the shear layer that is present in the immediate sub-surface layers of the Sun. In the case of the zonal-flow pattern, we find that the band indicating fast rotating region close to the equator seems to have bifurcated around 2005. Our investigation of the rotation-rate gradients show that the relative variation in the rotation-rate gradients is about 20% or more of their average values, which is much larger than the relative variation in the rotation rate itself. These results can be used to test predictions of various solar dynamo models.

H. M. Antia; Sarbani Basu; S. M. Chitre

2008-05-22T23:59:59.000Z

355

Position paper -- Tank ventilation system design air flow rates  

SciTech Connect (OSTI)

The purpose of this paper is to document a project position on required ventilation system design air flow rates for the waste storage tanks currently being designed by project W-236A, the Multi-Function Waste Tank Facility (MWTF). The Title 1 design primary tank heat removal system consists of two systems: a primary tank vapor space ventilation system; and an annulus ventilation system. At the conclusion of Title 1 design, air flow rates for the primary and annulus ventilation systems were 960 scfm and 4,400 scfm, respectively, per tank. These design flow rates were capable of removing 1,250,000 Btu/hr from each tank. However, recently completed and ongoing studies have resulted in a design change to reduce the extreme case heat load to 700,000 Btu/hr. This revision of the extreme case heat load, coupled with results of scale model evaporative testing performed by WHC Thermal Hydraulics, allow for a reduction of the design air flow rates for both primary and annulus ventilation systems. Based on the preceding discussion, ICF Kaiser Hanford Co. concludes that the design should incorporate the following design air flow rates: Primary ventilation system--500 scfm maximum and Annulus ventilation system--1,100 scfm maximum. In addition, the minimum air flow rates in the primary and annulus ventilation systems will be investigated during Title 2 design. The results of the Title 2 investigation will determine the range of available temperature control using variable air flows to both ventilation systems.

Goolsby, G.K.

1995-01-04T23:59:59.000Z

356

Inverse bremsstrahlung heating rate for dense plasmas in laser fields  

SciTech Connect (OSTI)

We report a theoretical analysis of inverse bremsstrahlung heating rate in the eikonal approximation. The present analysis is performed for a dense plasma using the screened electron-ion interaction potential for the ion charge state Z{sub i} = 1 and for both the weak and strong plasma screening cases. We have also compared the eikonal results with the first Born approximation (FBA) [M. Moll et al., New J. Phys. 14, 065010 (2012)] calculation. We find that the magnitudes of inverse bremsstrahlung heating rate within the eikonal approximation (EA) are larger than the FBA values in the weak screening case (? = 0.03 a.u.) in a wide range of field strength for three different initial electron momenta (2, 3, and 4 a.u.). But for strong screening case (? = 0.3 a.u.), the heating rates predicted by the two approximations do not differ much after reaching their maximum values. Furthermore, the individual contribution of photoemission and photoabsorption processes to heating rate is analysed for both the weak and strong screening cases. We find that the single photoemission and photoabsorption rates are the same throughout the field strength while the multiphoton absorption process dominates over the multiphoton emission process beyond the field strength ? 4×10{sup 8} V/cm. The present study of the dependence of heating rate on the screening parameter ranging from 0.01 to 20 shows that whereas the heating rate predicted by the EA is greater than the FBA up to the screening parameter ? = 0.3 a.u., the two approximation methods yield results which are nearly identical beyond the above value.

Dey, R. [D-203, Samruddhi Residency, Motera, Ahmedabad-380009, Gujarat (India)] [D-203, Samruddhi Residency, Motera, Ahmedabad-380009, Gujarat (India); Roy, A. C. [School of Mathematical Sciences, Ramakrishna Mission Vivekananda University, Belur Math 711202, West Bengal (India)] [School of Mathematical Sciences, Ramakrishna Mission Vivekananda University, Belur Math 711202, West Bengal (India)

2013-07-15T23:59:59.000Z

357

Dynamic and rate-dependent yielding in model cohesive suspensions  

E-Print Network [OSTI]

An experimental system has been found recently, a coagulated CaCO3 suspension, that shows very different yield behaviour depending upon how it is tested and at what rate it is strained. At P\\'eclet number Pe > 1 it behaves as a simple Herschel Bulkley liquid, whereas at Pe it shows hysteresis and shear-banding and in the usual type of sweep used to measure flow curves in controlled stress mode routinely, it shows very erratic and irreproducible behaviour. All of these features can be attributed to a dependence of yield stress on rate of strain. Stress growth curves obtained from step strain-rate testing showed that the rate-dependence of the yield stress was a consequence of rate-dependent strain-softening. At very low Pe yield was cooperative and the yield strain was order-one, whereas as the Pe approached unity, the yield strain reduced to that needed to break interparticle bonds and the yield stress decayed to a minimal value. For example, at 40%v/v it dropped from ca. 200 Pa to It is suspected that the rich behaviour seen for the CaCO3 system could well be the rule rather than the exception for cohesive suspensions, the importance or otherwise of the rate dependence being a matter of scale or degree. If so, then the Herschel-Bulkley equation could usefully be generalised to read (in simple shear). The proposition that rate-dependent yield might be general, for cohesive suspensions at least, is amenable to further rigorous experimental testing by a range of means and along lines suggested.

Richard Buscall; Peter J Scales; Anthony D Stickland; Hui-En Teo; Tiara E Kusuma; Daniel R Lester

2014-10-01T23:59:59.000Z

358

Prediction of interest rate using CKLS model with stochastic parameters  

SciTech Connect (OSTI)

The Chan, Karolyi, Longstaff and Sanders (CKLS) model is a popular one-factor model for describing the spot interest rates. In this paper, the four parameters in the CKLS model are regarded as stochastic. The parameter vector ?{sup (j)} of four parameters at the (J+n)-th time point is estimated by the j-th window which is defined as the set consisting of the observed interest rates at the j?-th time point where j?j??j+n. To model the variation of ?{sup (j)}, we assume that ?{sup (j)} depends on ?{sup (j?m)}, ?{sup (j?m+1)},…, ?{sup (j?1)} and the interest rate r{sub j+n} at the (j+n)-th time point via a four-dimensional conditional distribution which is derived from a [4(m+1)+1]-dimensional power-normal distribution. Treating the (j+n)-th time point as the present time point, we find a prediction interval for the future value r{sub j+n+1} of the interest rate at the next time point when the value r{sub j+n} of the interest rate is given. From the above four-dimensional conditional distribution, we also find a prediction interval for the future interest rate r{sub j+n+d} at the next d-th (d?2) time point. The prediction intervals based on the CKLS model with stochastic parameters are found to have better ability of covering the observed future interest rates when compared with those based on the model with fixed parameters.

Ying, Khor Chia [Faculty of Computing and Informatics, Multimedia University, Jalan Multimedia, 63100 Cyberjaya, Selangor (Malaysia); Hin, Pooi Ah [Sunway University Business School, No. 5, Jalan Universiti, Bandar Sunway, 47500 Subang Jaya, Selangor (Malaysia)

2014-06-19T23:59:59.000Z

359

Wholesale Power and Transmission Rate Projections 1993--2014 and Historical Wholesale Power Rates 1939--1992.  

SciTech Connect (OSTI)

This document provides a range of high, medium, and low case long-term projections of Bonneville Power Administration`s (BPA) wholesale power rates and a medium case long-term projection of BPA`s wheeling rates. These projections are produced annually by BPA. BPA uses these projections in long-term marketing, resource, transmission, and financial planning assessments. BPA`s projections also are used by public utility commissions, utilities, and others for a variety of planning purposes. The analysis used for these rate projections assumes that current rate making methodologies continue into the future and are further based on certain assumptions about regional loads, extra-regional markets, the costs of resources, BPA`s financial requirements, and the capability of the region`s power plants. While these projections are intended to address the overall uncertainty in rate levels, BPA realizes that the future will not reflect any specific set of assumptions. The rate projections in this document have been prepared prior to the Draft 1993 BPA Marketing Plan, the implementation of which is almost certain to push BPA away from any set of assumptions in this document. Therefore, this document can be thought of as representing the ``old`` BPA with its products and policies. It can be viewed as a starting point or reference point to measure the impact of the ``new`` BPA with its Marketing Plan, and the broader undertaking referred to as the Competitiveness Project.

US Bonneville Power Administration

1993-11-01T23:59:59.000Z

360

Comparison of the Sputter Rates of Oxide Films Relative to the...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Sputter Rates of Oxide Films Relative to the Sputter Rate of SiO2. Comparison of the Sputter Rates of Oxide Films Relative to the Sputter Rate of SiO2. Abstract: Because of the...

Note: This page contains sample records for the topic "rating cancel rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Ferrocarriles nacionales de Mexico: the existing rate structure for grain/soybean shipments and likely effect on freight rates as a result of railroad privatization in Mexico  

E-Print Network [OSTI]

's existing rate structure and, based on collected FNM Waybill data, regression models were estimated. Projected costs in the privatized railroad system were estimated to provide a lower bound estimate of rates. An upper bound estimate of rates was based...

Neyer, David McAlister

1994-01-01T23:59:59.000Z

362

Taxi Companies & NU Rates Winter 2011 Survey Note: These rates are subject to change; verify all rates directly with taxi company.  

E-Print Network [OSTI]

$51.00 + $1 extra per person $33.00 + $1 extra per person Northshore Cab* 2 ppl $35.00 3 ppl $42.00 4 ppl $48.00 2 ppl $60.00 3 ppl $72.00 4 ppl $80.00 $35.00 (request flat rate) (4 ppl min) Best Taxi Services $60.00 $75.00 $60.00 minivan only (by ordinance) (4 ppl min) 303 Taxi Services** $33

Shahriar, Selim

363

2007 Wholesale Power Rate Case Initial Proposal : Risk Analysis Study.  

SciTech Connect (OSTI)

The Federal Columbia River Power System (FCRPS), operated on behalf of the ratepayers of the PNW by BPA and other Federal agencies, faces many uncertainties during the FY 2007-2009 rate period. Among these uncertainties, the largest revolve around hydro conditions, market prices and river operations for fish recovery. In order to provide a high probability of making its U.S. Treasury payments, BPA performs a Risk Analysis as part of its rate-making process. In this Risk Analysis, BPA identifies key risks, models their relationships, and then analyzes their impacts on net revenues (total revenues less expenses). BPA subsequently evaluates in the ToolKit Model the Treasury Payment Probability (TPP) resulting from the rates, risks, and risk mitigation measures described here and in the Wholesale Power Rate Development Study (WPRDS). If the TPP falls short of BPA's standard, additional risk mitigation revenues, such as PNRR and CRAC revenues are incorporated in the modeling in ToolKit until the TPP standard is met. Increased wholesale market price volatility and six years of drought have significantly changed the profile of risk and uncertainty facing BPA and its stakeholders. These present new challenges for BPA in its effort to keep its power rates as low as possible while fully meeting its obligations to the U.S. Treasury. As a result, the risk BPA faces in not receiving the level of secondary revenues that have been credited to power rates before receiving those funds is greater. In addition to market price volatility, BPA also faces uncertainty around the financial impacts of operations for fish programs in FY 2006 and in the FY 2007-2009 rate period. A new Biological Opinion or possible court-ordered change to river operations in FY 2006 through FY 2009 may reduce BPA's net revenues included Initial Proposal. Finally, the FY 2007-2009 risk analysis includes new operational risks as well as a more comprehensive analysis of non-operating risks. Both the operational and non-operational risks will be described in Section 2.0 of this study. Given these risks, if rates are designed using BPA's traditional approach of only adding Planned Net Revenues for Risk (PNRR), power rates would need to recover a much larger ''risk premium'' to meet BPA's TPP standard. As an alternative to high fixed risk premiums, BPA is proposing a risk mitigation package that combines PNRR with a variable rate mechanism similar to the cost recovery adjustment mechanisms used in the FY 2002-2006 rate period. The proposed risk mitigation package is less expensive on a forecasted basis because the rates can be adjusted on an annual basis to respond to uncertain financial outcomes. BPA is also proposing a Dividend Distribution Clause (DDC) to refund reserves in excess of $800M to customers in the event net revenues in the next rate period exceed current financial forecasts.

United States. Bonneville Power Administration.

2005-11-01T23:59:59.000Z

364

PRECEDENTS FOR AUTHORIZATION OF CONTENTS USING DOSE RATE MEASUREMENTS  

SciTech Connect (OSTI)

For the transportation of Radioactive Material (RAM) packages, the requirements for the maximum allowed dose rate at the package surface and in its vicinity are given in Title 10 of the Code of Federal Regulations, Section 71.47. The regulations are based on the acceptable dose rates to which the public, workers, and the environment may be exposed. As such, the regulations specify dose rates, rather than quantity of radioactive isotopes and require monitoring to confirm the requirements are met. 10CFR71.47 requires that each package of radioactive materials offered for transportation must be designed and prepared for shipment so that under conditions normally incident to transportation the radiation level does not exceed 2 mSv/h (200 mrem/h) at any point on the external Surface of the package, and the transport index does not exceed 10. Before shipment, the dose rate of the package is determined by measurement, ensuring that it conforms to the regulatory limits, regardless of any analyses. This is the requirement for all certified packagings. This paper discusses the requirements for establishing the dose rates when shipping RAM packages and the precedents for meeting these requirements by measurement.

Abramczyk, G.; Bellamy, S.; Nathan, S.; Loftin, B.

2012-06-05T23:59:59.000Z

365

High frame rate CCD camera with fast optical shutter  

SciTech Connect (OSTI)

A high frame rate CCD camera coupled with a fast optical shutter has been designed for high repetition rate imaging applications. The design uses state-of-the-art microchannel plate image intensifier (MCPII) technology fostered/developed by Los Alamos National Laboratory to support nuclear, military, and medical research requiring high-speed imagery. Key design features include asynchronous resetting of the camera to acquire random transient images, patented real-time analog signal processing with 10-bit digitization at 40--75 MHz pixel rates, synchronized shutter exposures as short as 200pS, sustained continuous readout of 512 x 512 pixels per frame at 1--5Hz rates via parallel multiport (16-port CCD) data transfer. Salient characterization/performance test data for the prototype camera are presented, temporally and spatially resolved images obtained from range-gated LADAR field testing are included, an alternative system configuration using several cameras sequenced to deliver discrete numbers of consecutive frames at effective burst rates up to 5GHz (accomplished by time-phasing of consecutive MCPII shutter gates without overlap) is discussed. Potential applications including dynamic radiography and optical correlation will be presented.

Yates, G.J.; McDonald, T.E. Jr. [Los Alamos National Lab., NM (United States); Turko, B.T. [Lawrence Berkeley National Lab., CA (United States)

1998-09-01T23:59:59.000Z

366

Measuring Outdoor Air Intake Rates into Existing Building  

SciTech Connect (OSTI)

Practical and accurate technologies are needed for continuously measuring and controlling outdoor air (OA) intake rates in commercial building heating, ventilating, and air conditioning (HVAC) systems. This project evaluated two new measurement approaches. Laboratory experiments determined that OA flow rates were measurable with errors generally less than 10 percent using electronic air velocity probes installed between OA intake louver blades or at the outlet face of louvers. High accuracy was maintained with OA flow rates as low as 15 percent of the maximum for the louvers. Thus, with this measurement approach HVAC systems do not need separate OA intakes for minimum OA supply. System calibration parameters are required for each unique combination of louver type and velocity sensor location but calibrations are not necessary for each system installation. The research also determined that the accuracy of measuring OA flow rates with velocity probes located in the duct downstream of the intake louver was not improved by installing honeycomb airflow straighteners upstream of the probes. Errors varied with type of upstream louver, were as high as 100 percent, and were often greater than 25 percent. In conclusion, use of electronic air velocity probes between the blades of OA intake louvers or at the outlet face of louvers is a highly promising means of accurately measuring rates of OA flow into HVAC systems. The use of electronic velocity probes downstream of airflow straighteners is less promising, at least with the relatively small OA HVAC inlet systems employed in this research.

Fisk, William; Sullivan, Douglas; Cohen, Sebastian; Han, Hwataik

2009-04-16T23:59:59.000Z

367

RADIOLYTIC GAS PRODUCTION RATES OF POLYMERS EXPOSED TO TRITIUM GAS  

SciTech Connect (OSTI)

Data from previous reports on studies of polymers exposed to tritium gas is further analyzed to estimate rates of radiolytic gas production. Also, graphs of gas release during tritium exposure from ultrahigh molecular weight polyethylene (UHMW-PE), polytetrafluoroethylene (PTFE, a trade name is Teflon®), and Vespel® polyimide are re-plotted as moles of gas as a function of time, which is consistent with a later study of tritium effects on various formulations of the elastomer ethylene-propylene-diene monomer (EPDM). These gas production rate estimates may be useful while considering using these polymers in tritium processing systems. These rates are valid at least for the longest exposure times for each material, two years for UHMW-PE, PTFE, and Vespel®, and fourteen months for filled and unfilled EPDM. Note that the production “rate” for Vespel® is a quantity of H{sub 2} produced during a single exposure to tritium, independent of length of time. The larger production rate per unit mass for unfilled EPDM results from the lack of filler- the carbon black in filled EPDM does not produce H{sub 2} or HT. This is one aspect of how inert fillers reduce the effects of ionizing radiation on polymers.

Clark, E.

2013-08-31T23:59:59.000Z

368

Statistical Methods for Thermonuclear Reaction Rates and Nucleosynthesis Simulations  

E-Print Network [OSTI]

Rigorous statistical methods for estimating thermonuclear reaction rates and nucleosynthesis are becoming increasingly established in nuclear astrophysics. The main challenge being faced is that experimental reaction rates are highly complex quantities derived from a multitude of different measured nuclear parameters (e.g., astrophysical S-factors, resonance energies and strengths, particle and gamma-ray partial widths). We discuss the application of the Monte Carlo method to two distinct, but related, questions. First, given a set of measured nuclear parameters, how can one best estimate the resulting thermonuclear reaction rates and associated uncertainties? Second, given a set of appropriate reaction rates, how can one best estimate the abundances from nucleosynthesis (i.e., reaction network) calculations? The techniques described here provide probability density functions that can be used to derive statistically meaningful reaction rates and final abundances for any desired coverage probability. Examples are given for applications to s-process neutron sources, core-collapse supernovae, classical novae, and big bang nucleosynthesis.

Christian Iliadis; Richard Longland; Alain Coc; F. X. Timmes; Art E. Champagne

2014-09-19T23:59:59.000Z

369

Spin Exchange Rates in Electron-Hydrogen Collisions  

E-Print Network [OSTI]

The spin temperature of neutral hydrogen, which determines the 21 cm optical depth and brightness temperature, is set by the competition between radiative and collisional processes. In the high-redshift intergalactic medium, the dominant collisions are typically those between hydrogen atoms. However, collisions with electrons couple much more efficiently to the spin state of hydrogen than do collisions with other hydrogen atoms and thus become important once the ionized fraction exceeds ~1%. Here we compute the rate at which electron-hydrogen collisions change the hydrogen spin. Previous calculations included only S-wave scattering and ignored resonances near the n=2 threshold. We provide accurate results, including all partial wave terms through the F-wave, for the de-excitation rate at temperatures T_K =2 hydrogen levels becomes significant. Accurate electron-hydrogen collision rates at higher temperatures are not necessary, because collisional excitation in this regime inevitably produces Lyman-alpha photons, which in turn dominate spin exchange when T_K > 6200 K even in the absence of radiative sources. Our rates differ from previous calculations by several percent over the temperature range of interest. We also consider some simple astrophysical examples where our spin de-excitation rates are useful.

Steven Furlanetto; Michael Furlanetto

2006-08-02T23:59:59.000Z

370

The Wisconsin Home Energy Rating System: Final report  

SciTech Connect (OSTI)

The Wisconsin Home Energy Rating System (HERS) has been developed by the Department of Industry, Labor, and Human Relations under contract to the Department of Administration, Division of State Energy. The contract is funded by the US Department of Energy. The contract calls for development of a home energy rating system for 1- and 2-family dwellings, or adaptation of an already existing one, for one by the State of Wisconsin. The rating system was to be developed in the form of a simple rating tool which could be distributed for testing through municipal building inspectors. At the time it was distributed, results were to be returned and analyzed for accuracy and ease of use. Computer modeling was to be used to verify accuracy. An Ad Hoc Committee of people involved in the home market, in utilities, and in state government energy conservation agencies was established to advise DILHR and DSE staff on development of the rating system. (See Appendix G for a list of the Ad Hoc Committee members). The Ad Hoc Committee had a number of concerns about how the HERS might affect the real estate market, and whether it was worth doing. Their input helped set the direction the HERS was to aim at, and their advice, from several different angles of the home market, was very helpful to staff. This report will give some background on the process of development of the HERS and the Ad Hoc Committee, and then will give details of the technical development.

Ebisch, L.

1986-09-30T23:59:59.000Z

371

GM Project G.6 October 20008 -1 8. FATAL CRASH RATES  

E-Print Network [OSTI]

GM Project G.6 October 20008 - 1 8. FATAL CRASH RATES 8.1 MODELING FATALITY RATES FOR OLDER DRIVERS crash rate concepts we call "driver risk,"or the driver fatality rate. It is the fatality rate, per mile driver. The driver fatality risk rate is measured by dividing the number of older drivers in a given age

372

Gas temperature profiles at different flow rates and heating rates suffice to estimate kinetic parameters for fluidised bed combustion  

SciTech Connect (OSTI)

Experimental work on estimation kinetic parameters for combustion was conducted in a bench-scale fluidised bed (FB: 105x200mm). Combustion medium was obtained by using an electrical heater immersed into the bed. The ratio of heating rate (kJ/s) to molar flow rate of air (mol/s) regulated by a rheostat so that the heat of combustion (kJ/mol) can be synthetically obtained by an electrical power supply for relevant O{sub 2}-feedstock concentration (C{sub 0}). O{sub 2}-restriction ratio ({beta}) was defined by the ratio of O{sub 2}-feedstock concentration to O{sub 2}-air concentration (C{sub O{sub 2}-AIR}) at prevailing heating rates. Compressed air at further atmospheric pressure ({approx_equal}102.7kPa) entered the bed that was alumina particles (250{mu}m). Experiments were carried out at different gas flow rates and heating rates. FB was operated with a single charge of (1300g) particles for obtaining the T/T{sub 0} curves, and than C/C{sub 0} curves. The mathematical relationships between temperature (T) and conversion ratio (X) were expressed by combining total energy balance and mass balance in FB. Observed surface reaction rate constants (k{sub S}) was obtained from the combined balances and proposed model was also tested for these kinetic parameters (frequency factor: k{sub 0}, activation energy: E{sub A}, and reaction order: n) obtained from air temperature measurements. It was found that the model curves allow a good description of the experimental data. Thus, reaction rate for combustion was sufficiently expressed. (author)

Suyadal, Y. [Faculty of Engineering, Department of Chemical Engineering, Ankara University, 06100-Tandogan, Ankara (Turkey)

2006-07-15T23:59:59.000Z

373

Imaginary-time method for radiative capture reaction rate  

E-Print Network [OSTI]

We propose a new computational method for astrophysical reaction rate of radiative capture process. In the method, an evolution of a wave function is calculated along the imaginary-time axis which is identified as the inverse temperature. It enables direct evaluation of reaction rate as a function of temperature without solving any scattering problem. The method is tested for two-body radiative capture reaction, ${^{16}{\\rm O}}(\\alpha,\\gamma){^{20}{\\rm Ne}}$, showing that it gives identical results to that calculated by the ordinary procedure. The new method will be suited for calculation of triple-alpha radiative capture rate for which an explicit construction of the scattering solution is difficult.

Kazuhiro Yabana; Yasuro Funaki

2012-02-15T23:59:59.000Z

374

Renewal convergence rates and correlation decay for homogeneous pinning models  

E-Print Network [OSTI]

A class of discrete renewal processes with super-exponentially decaying inter-arrival distributions coincides with the infinite volume limit of general homogeneous pinning models in their localized phase. Pinning models are statistical mechanics systems to which a lot of attention has been devoted both for their relevance for applications and because they are solvable models exhibiting a non-trivial phase transition. The spatial decay of correlations in these systems is directly mapped to the speed of convergence to equilibrium for the associated renewal processes. We show that close to criticality, under general assumptions, the correlation decay rate, or the renewal convergence rate, coincides with the inter-arrival decay rate. We also show that, in general, this is false away from criticality. Under a stronger assumption on the inter-arrival distribution we establish a local limit theorem, capturing thus the sharp asymptotic behavior of correlations.

Giambattista Giacomin

2007-06-03T23:59:59.000Z

375

Rate constants for charge transfer across semiconductor-liquid interfaces  

SciTech Connect (OSTI)

Interfacial charge-transfer rate constants have been measured for n-type Si electrodes in contact with a series of viologen-based redox couples in methanol through analyses of the behavior of these junctions with respect to their current density versus potential and differential capacitance versus potential properties. The data allow evaluation of the maximum rate constant (and therefore the electronic coupling) for majority carriers in the solid as well as of the dependence of the rate constant on the driving force for transfer of delocalized electrons from the n-Si semiconducting electrode into the localized molecular redox species in the solution phase. The data are in good agreement with existing models of this interfacial electron transfer process and provide insight into the fundamental kinetic events underlying the use of semiconducting photoelectrodes in applications such as solar energy conversion. 23 refs., 3 figs.

Fajardo, A.M.; Lewis, N.S. [California Institute of Technology, Pasadena, CA (United States)

1996-11-08T23:59:59.000Z

376

Data attribute rating system. Report for May-September 1994  

SciTech Connect (OSTI)

Emission inventories are being developed by policy makers and scientists in an effort to study emission trends. Because of the great variety of data and range of techniques used, the inventories vary considerably in their reliability and accuracy. It is difficult to compare emission estimates for different sources where widely different methodologies have been employed in their development. An inventory rating system can help to compare and evaluate inventories. The paper outlines a new emission inventory rating concept--the Data Attribute Rating System (DARS)--that has been developed by the Air and Energy Engineering Research Laboratory (AEERL) of the U.S. Environmental Protection Agency (EPA). The system was developed to rank global inventories of emissions of greenhouse gases. However, the DARS can be applied to emission inventories of any component (gases, particulates, criteria pollutants, toxics, etc.) at any scale.

Beck, L.L.; Peer, R.L.; Bravo, L.A.; Yan, Y.

1995-04-01T23:59:59.000Z

377

Concentration-Temperature Superposition of Helix Folding Rates in Gelatin  

E-Print Network [OSTI]

We study the kinetics of helix-coil transition in water solutions of gelatin (collagen protein) by optical rotation techniques combined with thermal characterization. By examining the rates of secondary helix folding, and covering a very wide range of solution concentrations, we are able to identify a universal exponential dependence of folding rate on concentration and quench temperature. We demonstrate a new concentration-temperature superposition of data at all temperatures and concentrations, and build the corresponding master curve. The results support the concept of a diffuse helix-coil transition. We find no concentration dependance of the normalized rate constant, suggesting first order (single) kinetics of secondary helix folding dominate in the early stages of renaturation.

J. L. Gornall; E. M. Terentjev

2006-03-05T23:59:59.000Z

378

Mixing and segregation rates in sheared granular materials  

E-Print Network [OSTI]

The size-segregation of granular materials, a process colloquially known as the Brazil Nut Effect, has generally been thought to proceed faster the greater the size difference of the particles. We experimentally investigate sheared bidisperse granular materials as a function of the size ratio of the two species, and find that the mixing rate at low confining pressure behaves as expected from percolation-based arguments. However, we also observe an anomalous effect for the re-segregation rates, wherein particles of both dissimilar and similar sizes segregate more slowly than intermediate particle size ratios. Combined with the fact that increasing the confining pressure significantly suppresses both mixing and segregation rates of particles of dissimilar size, we propose that the anomalous behavior may be attributed to a species-dependent distribution of forces within the system.

Laura A. Golick; Karen E. Daniels

2009-06-17T23:59:59.000Z

379

Electrochemical corrosion rate probes for high temperature energy applications  

SciTech Connect (OSTI)

Electrochemical corrosion rate (ECR) probes were constructed and exposed along with mass loss coupons in a N2/O2/CO2/H2O environment to determine ECR probe operating characteristics. Temperatures ranged from 450 to 800 C and both ECR probes and mass loss coupons were coated with ash. Results are presented in terms of the probe response to temperature, the measured zero baseline, and the quantitative nature of the probes. The effect of Stern-Geary constant and the choice of electrochemical technique used to measure the corrosion rate are also discussed. ECR probe corrosion rates were a function of time, temperature, and process environment and were found to be quantitative for some test conditions. Measured Stern-Geary constants averaged 0.0141 V/decade and the linear polarization technique was found to be more quantitative than the electrochemical noise technique.

Covino, Bernard S., Jr.; Bullard, Sophie J.; Cramer, Stephen D.; Holcomb, Gordon R.; Ziomek-Moroz, M.; Cayard, M.S. (InterCorr International Inc.); Eden, D.A. (InterCorr International Inc.)

2004-01-01T23:59:59.000Z

380

Inferring the Rate-Length Law of Protein Folding  

E-Print Network [OSTI]

We investigate the rate-length scaling law of protein folding, a key undetermined scaling law in the analytical theory of protein folding. We demonstrate that chain length is a dominant factor determining folding times, and that the unambiguous determination of the way chain length corre- lates with folding times could provide key mechanistic insight into the folding process. Four specific proposed laws (power law, exponential, and two stretched exponentials) are tested against one an- other, and it is found that the power law best explains the data. At the same time, the fit power law results in rates that are very fast, nearly unreasonably so in a biological context. We show that any of the proposed forms are viable, conclude that more data is necessary to unequivocally infer the rate-length law, and that such data could be obtained through a small number of protein folding experiments on large protein domains.

Lane, Thomas J

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "rating cancel rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Commercial Building Energy Asset Rating Program -- Market Research  

SciTech Connect (OSTI)

Under contract to Pacific Northwest National Laboratory, HaydenTanner, LLC conducted an in-depth analysis of the potential market value of a commercial building energy asset rating program for the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy. The market research objectives were to: (1) Evaluate market interest and need for a program and tool to offer asset rating and rapidly identify potential energy efficiency measures for the commercial building sector. (2) Identify key input variables and asset rating outputs that would facilitate increased investment in energy efficiency. (3) Assess best practices and lessons learned from existing national and international energy rating programs. (4) Identify core messaging to motivate owners, investors, financiers, and others in the real estate sector to adopt a voluntary asset rating program and, as a consequence, deploy high-performance strategies and technologies across new and existing buildings. (5) Identify leverage factors and incentives that facilitate increased investment in these buildings. To meet these objectives, work consisted of a review of the relevant literature, examination of existing and emergent asset and operational rating systems, interviews with industry stakeholders, and an evaluation of the value implication of an asset label on asset valuation. This report documents the analysis methodology and findings, conclusion, and recommendations. Its intent is to support and inform the DOE Office of Energy Efficiency and Renewable Energy on the market need and potential value impacts of an asset labeling and diagnostic tool to encourage high-performance new buildings and building efficiency retrofit projects.

McCabe, Molly J.; Wang, Na

2012-04-19T23:59:59.000Z

382

Microscopic description of neutron emission rates in compound nuclei  

E-Print Network [OSTI]

The neutron emission rates in thermal excited nuclei are conventionally described by statistical models with a phenomenological level density parameter that depends on excitation energies, deformations and mass regions. In the microscopic view of hot nuclei, the neutron emission rates can be determined by the external neutron gas densities without any free parameters. Therefore the microscopic description of thermal neutron emissions is desirable that can impact several understandings such as survival probabilities of superheavy compound nuclei and neutron emissivity in reactors. To describe the neutron emission rates microscopically, the external thermal neutron gases are self-consistently obtained based on the Finite-Temperature Hartree-Fock-Bogoliubov (FT-HFB) approach. The results are compared with the statistical model to explore the connections between the FT-HFB approach and the statistical model. The Skyrme FT-HFB equation is solved by HFB-AX in deformed coordinate spaces. Based on the FT-HFB approach, the thermal properties and external neutron gas are properly described with the self-consistent gas substraction procedure. Then neutron emission rates can be obtained based on the densities of external neutron gases. The thermal statistical properties of $^{238}$U and $^{258}$U are studied in detail in terms of excitation energies. The thermal neutron emission rates in $^{238, 258}$U and superheavy compound nuclei $_{112}^{278}$Cn and $_{114}^{292}$Fl are calculated, which agree well with the statistical model by adopting an excitation-energy-dependent level density parameter. The coordinate-space FT-HFB approach can provide reliable microscopic descriptions of neutron emission rates in hot nuclei, as well as microscopic constraints on the excitation energy dependence of level density parameters for statistical models.

Yi Zhu; Junchen Pei

2014-11-02T23:59:59.000Z

383

TECHNICAL RISK RATING OF DOE ENVIRONMENTAL PROJECTS - 9153  

SciTech Connect (OSTI)

The U.S. Department of Energy's Office of Environmental Management (DOE-EM) was established to achieve the safe and compliant disposition of legacy wastes and facilities from defense nuclear applications. The scope of work is diverse, with projects ranging from single acquisitions to collections of projects and operations that span several decades and costs from hundreds of millions to billions US$. The need to be able to manage and understand the technical risks from the project to senior management level has been recognized as an enabler to successfully completing the mission. In 2008, DOE-EM developed the Technical Risk Rating as a new method to assist in managing technical risk based on specific criteria. The Technical Risk Rating, and the criteria used to determine the rating, provides a mechanism to foster open, meaningful communication between the Federal Project Directors and DOE-EM management concerning project technical risks. Four indicators (technical maturity, risk urgency, handling difficulty and resolution path) are used to focus attention on the issues and key aspects related to the risks. Pressing risk issues are brought to the forefront, keeping DOE-EM management informed and engaged such that they fully understand risk impact. Use of the Technical Risk Rating and criteria during reviews provides the Federal Project Directors the opportunity to openly discuss the most significant risks and assists in the management of technical risks across the portfolio of DOE-EM projects. Technical Risk Ratings can be applied to all projects in government and private industry. This paper will present the methodology and criteria for Technical Risk Ratings, and provide specific examples from DOE-EM projects.

Cercy, M; Ronald Fayfich, R; Steven P Schneider, S

2008-12-12T23:59:59.000Z

384

Effects of external pressure on the terminal lymphatic flow rate  

E-Print Network [OSTI]

pressure applied to the skin of the canine cause the terminal lymphat- ic flow rate to increase until the external pressure reaches 60mm Hg. At an external pressure of 60mm Hg reduced lymphatic flow is observed in some of the test animals. At 75mm Hg... resulting from the external pressure begins to col- lapse the lymph vessels. External pressure between 60 and 75mm Hg restricts or completely occludes the terminal lymphatic flow rate. ACKNOWLEDGENENTS I would like to express my appreciation...

Seale, James Lewis

1981-01-01T23:59:59.000Z

385

Quantum corrections to classical evaluation of nonadiabatic transition rates  

SciTech Connect (OSTI)

A recently developed quantum correction approach is applied to evaluating the nonadiabatic quantum-mechanical transition rate between Born-Oppenheimer states of a subsystem embedded in a thermal bath of harmonic oscillators. In the first-order perturbation theory, the nonadiabatic rate can be expressed in terms of a quantum-mechanical correlation function, which can be estimated directly from classical data. Application to a popular spin-boson model shows that our results are in excellent agreement with the exact quantum-mechanical results.

Kim, Hyojoon; Rossky, Peter J. [Chemical Physics Theory Group, Department of Chemistry, University of Toronto, Toronto, Ontario M5S 3H6 (Canada); Institute for Theoretical Chemistry, Department of Chemistry and Biochemistry, University of Texas at Austin, Austin, Texas 78712 (United States)

2006-08-14T23:59:59.000Z

386

DSMC predictions of non-equilibrium reaction rates.  

SciTech Connect (OSTI)

A set of Direct Simulation Monte Carlo (DSMC) chemical-reaction models recently proposed by Bird and based solely on the collision energy and the vibrational energy levels of the species involved is applied to calculate nonequilibrium chemical-reaction rates for atmospheric reactions in hypersonic flows. The DSMC non-equilibrium model predictions are in good agreement with theoretical models and experimental measurements. The observed agreement provides strong evidence that modeling chemical reactions using only the collision energy and the vibrational energy levels provides an accurate method for predicting non-equilibrium chemical-reaction rates.

Gallis, Michail A.; Bond, Ryan Bomar; Torczynski, John Robert

2010-04-01T23:59:59.000Z

387

RECOMBINATION RATE COEFFICIENTS OF Be-LIKE Si  

SciTech Connect (OSTI)

Recombination of Be-like Si{sup 10+} over the 0-43 eV electron-ion energy range is measured at the CRYRING electron cooler. In addition to radiative and dielectronic recombination, the recombination spectrum also shows strong contributions from trielectronic recombination. Below 100 meV, several very strong resonances associated with a spin-flip of the excited electron dominate the spectrum and also dominate the recombination in the photoionized plasma. The resonant plasma rate coefficients corrected for the experimental field ionization are in good agreement with calculated results by Gu and with AUTOSTRUCTURE calculations. All other calculations significantly underestimate the plasma rate coefficients at low temperatures.

Orban, I.; Boehm, S.; Schuch, R. [Department of Physics, Stockholm University, 10691 Stockholm (Sweden); Loch, S. D. [Department of Physics, Auburn University, Auburn, AL 36849 (United States)

2010-10-01T23:59:59.000Z

388

Illite Dissolution Rates and Equation (100 to 280 dec C)  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

The objective of this suite of experiments was to develop a useful kinetic dissolution expression for illite applicable over an expanded range of solution pH and temperature conditions representative of subsurface conditions in natural and/or engineered geothermal reservoirs. Using our new data, the resulting rate equation is dependent on both pH and temperature and utilizes two specific dissolution mechanisms (a “neutral” and a “basic” mechanism). The form of this rate equation should be easily incorporated into most existing reactive transport codes for to predict rock-water interactions in EGS shear zones.

Carroll, Susan

389

High removal rate laser-based coating removal system  

DOE Patents [OSTI]

A compact laser system that removes surface coatings (such as paint, dirt, etc.) at a removal rate as high as 1000 ft.sup.2 /hr or more without damaging the surface. A high repetition rate laser with multiple amplification passes propagating through at least one optical amplifier is used, along with a delivery system consisting of a telescoping and articulating tube which also contains an evacuation system for simultaneously sweeping up the debris produced in the process. The amplified beam can be converted to an output beam by passively switching the polarization of at least one amplified beam. The system also has a personal safety system which protects against accidental exposures.

Matthews, Dennis L. (Moss Beach, CA); Celliers, Peter M. (Berkeley, CA); Hackel, Lloyd (Livermore, CA); Da Silva, Luiz B. (Danville, CA); Dane, C. Brent (Livermore, CA); Mrowka, Stanley (Richmond, CA)

1999-11-16T23:59:59.000Z

390

Non-resonant triple alpha reaction rate at low temperature  

SciTech Connect (OSTI)

Our experimental goal is to study the non-resonant triple alpha reaction rate at low temperture (T < 10{sup 8} K). The {sup 13}C(p,d) reaction at 66 MeV has been used to probe the alpha-unbound continuum state in {sup 12}C just below the 2{sup nd} 0{sup +} state at 7.65 MeV. The transition strength to the continuum state is predicted to be sensitive to the non-resonant triple alpha reaction rate. The experiment has been performed at iThemba LABS. We report the present status of the experiment.

Itoh, T.; Tamii, A.; Aoi, N.; Fujita, H.; Hashimoto, T.; Miki, K.; Ogata, K. [Research Center for Nuclear Physics, Osaka University, Ibaraki, Osaka 567-0047 (Japan); Carter, J.; Donaldson, L.; Sideras-Haddad, E. [Schools of Physics, University of Witwatersrand, Johannesburg 2050 (South Africa); Furuno, T.; Kawabata, T. [Departments of Physics, Kyoto University, Sakyo, Kyoto, 606-8502 (Japan); Kamimura, M. [RIKEN Nishina Center, Wako, Saitama, 351-0198 (Japan); Nemulodi, F.; Neveling, R.; Smit, F. D.; Swarts, C. [iThemba Laboratory for Accelerator Based Sciences Somerset, West, 7129 (South Africa)

2014-05-02T23:59:59.000Z

391

Illite Dissolution Rates and Equation (100 to 280 dec C)  

SciTech Connect (OSTI)

The objective of this suite of experiments was to develop a useful kinetic dissolution expression for illite applicable over an expanded range of solution pH and temperature conditions representative of subsurface conditions in natural and/or engineered geothermal reservoirs. Using our new data, the resulting rate equation is dependent on both pH and temperature and utilizes two specific dissolution mechanisms (a “neutral” and a “basic” mechanism). The form of this rate equation should be easily incorporated into most existing reactive transport codes for to predict rock-water interactions in EGS shear zones.

Carroll, Susan

2014-10-17T23:59:59.000Z

392

Entropy production rate as a constraint for collisionless fluid closures  

SciTech Connect (OSTI)

A novel method is proposed to construct collisionless fluid closures accounting for some kinetic properties. The first dropped fluid moment is assumed to be a linear function of the lower order ones. Optimizing the agreement between the fluid and kinetic entropy production rates is used to constrain the coefficients of the linear development. This procedure is applied to a reduced version of the interchange instability. The closure, involving the absolute value of the wave vector, is non-local in real space. In this case, the linear instability thresholds are the same, and the linear growth rates exhibit similar characteristics. Such a method is applicable to other models and classes of instabilities.

Fleurence, E.; Sarazin, Y.; Garbet, X.; Dif-Pradalier, G.; Ghendrih, Ph.; Grandgirard, V.; Ottaviani, M. [Association Euratom-CEA, CEA/DSM/DRFC Cadarache, 13108 Saint-Paul-Lez-Durance (France)

2006-11-30T23:59:59.000Z

393

Field dependent emission rates in radiation damaged GaAs  

SciTech Connect (OSTI)

We have measured the temperature and field dependence of emission rates from five traps in electron damaged GaAs. Four of the traps have previously been identified as radiation defects. One of the traps, seen in higher doped diodes, has not been previously identified. We have fit the data to a multiphonon emission theory that allows recombination in GaAs to be characterized over a broad range of temperature and electric field. These results demonstrate an efficient method to calculate field-dependent emission rates in GaAs.

Fleming, R. M.; Myers, S. M.; Wampler, W. R.; Lang, D. V.; Seager, C. H.; Campbell, J. M. [Sandia National Laboratories, Albuquerque, New Mexico 87185-1415 (United States)

2014-07-07T23:59:59.000Z

394

Temporal variations of the rotation rate in the solar interior  

E-Print Network [OSTI]

The temporal variations of the rotation rate in the solar interior are studied using frequency splittings from Global Oscillations Network Group (GONG) data obtained during the period 1995-99. We find alternating latitudinal bands of faster and slower rotation which appear to move towards the equator with time - similar to the torsional oscillations seen at the solar surface. This flow pattern appears to persist to a depth of about 0.1R_sun and in this region its magnitude is well correlated with solar activity indices. We do not find any periodic or systematic changes in the rotation rate near the base of the convection zone.

H. M. Antia; Sarbani Basu

2000-04-25T23:59:59.000Z

395

Energy levels, radiative rates, and electron impact excitation rates for transitions in Li-like ions with 21?Z?28  

SciTech Connect (OSTI)

We report calculations of energy levels, radiative rates, and electron impact excitation rates for transitions in Li-like ions with 21?Z?28. The General-Purpose Relativistic Atomic Structure Package is adopted for calculating energy levels and radiative rates, while for determining the collision strengths and subsequently the excitation rates, the Dirac Atomic R-matrix Code is used. Oscillator strengths, radiative rates, and line strengths are listed for all E1, E2, M1, and M2 transitions among the lowest 24 levels of the Li-like ions considered. Collision strengths have been averaged over a Maxwellian velocity distribution, and the effective collision strengths obtained are given over a wide temperature range up to 10{sup 7.8} K. Additionally, lifetimes are listed for all calculated levels of these ions. Finally, extensive comparisons are made with results available in the literature, as well as with our analogous calculations for all parameters with the Flexible Atomic Code, in order to assess the accuracy of the results.

Aggarwal, Kanti M., E-mail: K.Aggarwal@qub.ac.uk; Keenan, Francis P.

2012-11-15T23:59:59.000Z

396

Energy levels, radiative rates, and electron impact excitation rates for transitions in Li-like ions with 12?Z?20  

SciTech Connect (OSTI)

We report calculations of energy levels, radiative rates, and electron impact excitation rates for transitions in Li-like ions with 12?Z?20. The GRASP (general-purpose relativistic atomic structure package) is adopted for calculating energy levels and radiative rates, while for determining the collision strengths and subsequently the excitation rates, the Dirac atomic R-matrix code is used. Oscillator strengths, radiative rates, and line strengths are reported for all E1, E2, M1, and M2 transitions among the lowest 24 levels of the Li-like ions considered. Collision strengths have been averaged over a Maxwellian velocity distribution, and the effective collision strengths obtained are reported over a wide temperature range up to 10{sup 7.4} K. Additionally, lifetimes are also listed for all calculated levels of the ions. Finally, extensive comparisons are made with results available in the literature, as well as with our parallel calculations for all parameters with the Flexible Atomic Code, in order to assess the accuracy of the reported results.

Aggarwal, Kanti M., E-mail: K.Aggarwal@qub.ac.uk; Keenan, Francis P.

2013-03-15T23:59:59.000Z

397

High Strain Rate Tensile Testing of DOP-26 Iridium  

SciTech Connect (OSTI)

The iridium alloy DOP-26 was developed through the Radioisotope Power Systems Program in the Office of Nuclear Energy of the Department of Energy. It is used for clad vent set cups containing radioactive fuel in radioisotope thermoelectric generator (RTG) heat sources which provide electric power for spacecraft. This report describes mechanical testing results for DOP-26. Specimens were given a vacuum recrystallization anneal of 1 hour at 1375 C and tested in tension in orientations parallel and perpendicular to the rolling direction of the sheet from which they were fabricated. The tests were performed at temperatures ranging from room temperature to 1090 C and strain rates ranging from 1 x 10{sup -3} to 50 s{sup -1}. Room temperature testing was performed in air, while testing at elevated temperatures was performed in a vacuum better than 1 x 10{sup -4} Torr. The yield stress (YS) and the ultimate tensile stress (UTS) decreased with increasing temperature and increased with increasing strain rate. Between 600 and 1090 C, the ductility showed a slight increase with increasing temperature. Within the scatter of the data, the ductility did not depend on the strain rate. The reduction in area (RA), on the other hand, decreased with increasing strain rate. The YS and UTS values did not differ significantly for the longitudinal and transverse specimens. The ductility and RA values of the transverse specimens were marginally lower than those of the longitudinal specimens.

Schneibel, Joachim H [ORNL; Carmichael Jr, Cecil Albert [ORNL; George, Easo P [ORNL

2007-11-01T23:59:59.000Z

398

Historical mutation rates predict susceptibility to radiation in Chernobyl birds  

E-Print Network [OSTI]

Historical mutation rates predict susceptibility to radiation in Chernobyl birds A. P. MÃ?LLER* , J in the evolutionary past. Radioactive contamination from Chernobyl constitutes one such extreme perturbation of radiation from Chernobyl are also the species that in the past have been most susceptible to factors

Mousseau, Timothy A.

399

Determination of rate constants by the frequency response method  

SciTech Connect (OSTI)

A technique based upon transmission FTIR to obtain rate constants for adsorption and desorption over supported metal catalysts has been developed and tested. The technique requires the use of a sinusoidal perturbation function imposed on steady state linearized adsorption-desorption kinetics. The measurement of a phase lag between the sinusoidal inlet gas phase forcing concentration and the response of surface coverage, together with a measurement of the maximum amplitudes of the forcing function and surface response enable the calculation of the relevant adsorption and desorption rate constants. The technique has been successfully applied to the measurement of both adsorption and desorption rate constants for CO adsorbed on a 1% Pt/SiO/sub 2/ catalyst. The values obtained for these rate constants at 343 K were: K/sub a/ = 0.147 s/sup -1/ and K/sub d/ = 7.28 x 10/sup -3/ s/sup -1/. A sticking coefficient corresponding to the adsorption of weakly bonded CO on Pt under conditions of high CO surface coverage was obtained.

Li, Y.E.; Willcox, D.; Gonzalez, R.D.

1989-03-01T23:59:59.000Z

400

The Rate of Accretion and Spatial Distribution of Sediments  

E-Print Network [OSTI]

The Rate of Accretion and Spatial Distribution of Sediments In the Great Sippewisset Salt Marsh the effects of location relative to the sediment source and tidal channel, elevation, tide magnitude, and marsh grass coverage on the spatial distribution of sediments in the system. I also quantified

Vallino, Joseph J.

Note: This page contains sample records for the topic "rating cancel rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Phytoplankton blooms and fish recruitment rate: Effects of spatial distribution  

E-Print Network [OSTI]

Phytoplankton blooms and fish recruitment rate: Effects of spatial distribution V. N. Biktashev a consider the spatio-temporal dynamics of a spatially-structured generalisa- tion of the phytoplankton-zooplankton-fish. In particular, we study the dependence of the fish recruitment on carrying capacities of the plankton subsystem

Biktashev, Vadim N.

402

Prediction of cooling rate and microstructure in laser spot welds  

E-Print Network [OSTI]

of the energy balance along the keyhole wall, locally solving the energy balance equation and representing the temperature dependence of material properties and latent heat of phase transfor- mation is employed to simulate thermal cycles and cooling rates experienced by the material under various combinations of power

Cambridge, University of

403

New Jersey State Health Benefits Monthly Group Dental Rates  

E-Print Network [OSTI]

New Jersey State Health Benefits Monthly Group Dental Rates Effective January 1, 2013 to December.68 305 CIGNA Dental Health, Inc www.cigna.com/stateofnj 800-367-1037 All of New Jersey (Except Cape May County); Eastern Pennsylvania $11.28 $19.63 $32.10 $23.79 307 Healthplex (International Heath Care

404

Sustainable systems rating program: Marketing Green'' Building in Austin, Texas  

SciTech Connect (OSTI)

Four major resource issues for home construction were identified: water, energy, materials, and waste. A systems flow model was then developed that tracked the resource issues through interactive matrices in the areas of sourcing, processing, using, and disposing or recycling. This model served as the basis for a rating system used in an educational and marketing tool called the Eco-Home Guide.

Not Available

1991-12-01T23:59:59.000Z

405

Sustainable systems rating program: Marketing ``Green`` Building in Austin, Texas  

SciTech Connect (OSTI)

Four major resource issues for home construction were identified: water, energy, materials, and waste. A systems flow model was then developed that tracked the resource issues through interactive matrices in the areas of sourcing, processing, using, and disposing or recycling. This model served as the basis for a rating system used in an educational and marketing tool called the Eco-Home Guide.

Not Available

1991-12-01T23:59:59.000Z

406

MGH RADIATION ONCOLOGY REDUCED RATE MULTI-VISIT  

E-Print Network [OSTI]

MGH RADIATION ONCOLOGY REDUCED RATE MULTI-VISIT PARKING PROGRAM MGH Radiation Oncology Parking Programs enable patients undergoing radiation therapy to either self-park as close to the hospital patients currently in a treatment program; radiation therapy patients must have a minimum of two scheduled

Mootha, Vamsi K.

407

NBSBR 84-2867 Test Procedures for Rating  

E-Print Network [OSTI]

NBSBR 84-2867 Test Procedures for Rating Residential Heating and Cooling Absorption Equipment U the heating mode. Both air-source and ground water source absorption heat pumps are considered, as well as air for estimating the heating and cooling seasonal performance and cost of operation of residential water chillers

Oak Ridge National Laboratory

408

Nuclear fusion in dense matter: Reaction rate and carbon burning  

E-Print Network [OSTI]

In this paper we analyze the nuclear fusion rate between equal nuclei for all five different nuclear burning regimes in dense matter (two thermonuclear regimes, two pycnonuclear ones, and the intermediate regime). The rate is determined by Coulomb barrier penetration in dense environments and by the astrophysical S-factor at low energies. We evaluate previous studies of the Coulomb barrier problem and propose a simple phenomenological formula for the reaction rate which covers all cases. The parameters of this formula can be varied, taking into account current theoretical uncertainties in the reaction rate. The results are illustrated for the example of the ^{12}C+^{12}C fusion reaction. This reaction is very important for the understanding of nuclear burning in evolved stars, in exploding white dwarfs producing type Ia supernovae, and in accreting neutron stars. The S-factor at stellar energies depends on a reliable fit and extrapolation of the experimental data. We calculate the energy dependence of the S-factor using a recently developed parameter-free model for the nuclear interaction, taking into account the effects of the Pauli nonlocality. For illustration, we analyze the efficiency of carbon burning in a wide range of densities and temperatures of stellar matter with the emphasis on carbon ignition at densities rho > 10^9 g/cc.

L. R. Gasques; A. V. Afanasjev; E. F. Aguilera; M. Beard; L. C. Chamon; P. Ring; M. Wiescher; D. G. Yakovlev

2005-06-16T23:59:59.000Z

409

System Integration System Demonstration Low-Rate Initial Production Acquisition  

E-Print Network [OSTI]

, & Logistics Life Cycle Management Framework FOC IOC Full-Rate Production/Deployment MS B System Development its total life cycle. Dispose of the system in the most cost-effective manner at the end of its useful Capabilities Integration & Development System VCJCS Oversight CJCSI 3170.01E Defense Acquisition System USD

Rhoads, James

410

Predicting fruit fly's sensing rate with insect flight simulations  

E-Print Network [OSTI]

Predicting fruit fly's sensing rate with insect flight simulations Song Changa and Z. Jane Wangb and actuation. Interpreting our findings together with experimental results on fruit flies' reaction time and sensory motor reflexes, we conjecture that fruit flies sense their kinematic states every wing beat

Wang, Z. Jane

411

Logical Error Rate Scaling of the Toric Code  

E-Print Network [OSTI]

To date, a great deal of attention has focused on characterizing the performance of quantum error correcting codes via their thresholds, the maximum correctable physical error rate for a given noise model and decoding strategy. Practical quantum computers will necessarily operate below these thresholds meaning that other performance indicators become important. In this work we consider the scaling of the logical error rate of the toric code and demonstrate how, in turn, this may be used to calculate a key performance indicator. We use a perfect matching decoding algorithm to find the scaling of the logical error rate and find two distinct operating regimes. The first regime admits a universal scaling analysis due to a mapping to a statistical physics model. The second regime characterizes the behavior in the limit of small physical error rate and can be understood by counting the error configurations leading to the failure of the decoder. We present a conjecture for the ranges of validity of these two regimes and use them to quantify the overhead -- the total number of physical qubits required to perform error correction.

Fern H. E. Watson; Sean D. Barrett

2014-09-26T23:59:59.000Z

412

ACDOS2: an improved neutron-induced dose rate code  

SciTech Connect (OSTI)

To calculate the expected dose rate from fusion reactors as a function of geometry, composition, and time after shutdown a computer code, ACDOS2, was written, which utilizes up-to-date libraries of cross-sections and radioisotope decay data. ACDOS2 is in ANSI FORTRAN IV, in order to make it readily adaptable elsewhere.

Lagache, J.C.

1981-06-01T23:59:59.000Z

413

An increased estimate of the merger rate of double neutron  

E-Print Network [OSTI]

-star merger rate in the Galaxy is crucial in order to predict whether current gravity wave detectors of only a few double-neutron-star binaries with merger times less than the age of the Universe. Here we position and flux density for the pulsar. Knowledge of the pulsar position with subarcsecond precision

Sarkissian, John M.

414

Quantum and semiclassical theories of chemical reaction rates  

SciTech Connect (OSTI)

A rigorous quantum mechanical theory (and a semiclassical approximation thereto) is described for calculating chemical reaction rates ``directly``, i.e., without having to solve the complete state-to-state reactive scattering problem. The approach has many vestiges of transition state theory, for which it may be thought of as the rigorous generalization.

Miller, W.H. [Univ. of California, Berkeley, CA (United States). Dept. of Chemistry]|[Lawrence Berkeley National Lab., CA (United States). Chemical Sciences Div.

1995-09-01T23:59:59.000Z

415

Commercial Building Energy Asset Rating Tool User's Guide  

SciTech Connect (OSTI)

The U.S. Department of Energy’s Commercial Building Energy Asset Rating Tool is a web-based system that is designed to allow building owners, managers, and operators to more accurately assess the energy performance of their commercial buildings. This document provide a step-by-step instruction on how to use the tool.

Wang, Na; Makhmalbaf, Atefe; Matsumoto, Steven W.

2012-05-01T23:59:59.000Z

416

Amphibian Decline or Extinction? Current Declines Dwarf Background Extinction Rate  

E-Print Network [OSTI]

the background amphibian extinction rate. If current estimates of amphibian species in imminent danger). Although it is thought that 35 species of amphibians have gone extinct since 1500, this number may). Another 1,896 species may be in imminent danger of extinction (IUCN et al., 2006). All of these estimates

McCallum, Malcolm

417

A Global Volcano Product for Thermal Emission and Effusion Rate  

E-Print Network [OSTI]

for solar reflectance component #12;Hyperion Thermal Product: Basic ­Extract hot pixelsA Global Volcano Product for Thermal Emission and Effusion Rate: Hyperion of these have non-zero thermal signatures Geographical Distribution of Volcano Sensorweb Targets #12

Schaffer, Steven

418

MECHANICAL PROPERTIES AND MICROSTRUCTURAL EVOLUTIONS AT HIGH STRAIN RATES OF  

E-Print Network [OSTI]

characteristics of high purity nickel processed by electrodeposition tested in compression up to a dynamic strainMECHANICAL PROPERTIES AND MICROSTRUCTURAL EVOLUTIONS AT HIGH STRAIN RATES OF ELECTRODEPOSITED NICKEL H. Couque1 , A. Ouarem2 , G. Dirras2 and J. Gubicza3 Summary ­ The mechanical and microstructural

Gubicza, Jenõ

419

ORIGINAL PAPER Effects of nutritional status on metabolic rate, exercise  

E-Print Network [OSTI]

-Verlag 2009 Abstract The influence of feeding on swimming perfor- mance and exercise recovery in fish is poorly understood. Examining swimming behavior and physiological status following periods of feeding for swimming performance and physiological recovery. Rest- ing metabolic rates were also determined. Fasted

Suski, Cory David

420

EIS-0031: Bonneville Power Administration 1979 Wholesale Rate Increase  

Broader source: Energy.gov [DOE]

The Bonneville Power Administration (BPA) developed this statement to explain the reasons for BPA's proposed power rate schedule, to conduct an analysis of the impacts which the proposal or alternatives thereto could have on both physical and socioeconomic characteristics of the human environment and to identify methods for mitigating the effects of the proposal.

Note: This page contains sample records for the topic "rating cancel rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Sensitivity studies for the main r process: ?-decay rates  

SciTech Connect (OSTI)

The pattern of isotopic abundances produced in rapid neutron capture, or r-process, nucleosynthesis is sensitive to the nuclear physics properties of thousands of unstable neutron-rich nuclear species that participate in the process. It has long been recognized that the some of the most influential pieces of nuclear data for r-process simulations are ?-decay lifetimes. In light of experimental advances that have pushed measurement capabilities closer to the classic r-process path, we revisit the role of individual ?-decay rates in the r process. We perform ?-decay rate sensitivity studies for a main (A > 120) r process in a range of potential astrophysical scenarios. We study the influence of individual rates during (n, ?)-(?, n) equilibrium and during the post-equilibrium phase where material moves back toward stability. We confirm the widely accepted view that the most important lifetimes are those of nuclei along the r-process path for each astrophysical scenario considered. However, we find in addition that individual ?-decay rates continue to shape the final abundance pattern through the post-equilibrium phase, for as long as neutron capture competes with ? decay. Many of the lifetimes important for this phase of the r process are within current or near future experimental reach.

Mumpower, M.; Cass, J.; Passucci, G.; Aprahamian, A. [Department of Physics, University of Notre Dame, Notre Dame, Indiana 46556 (United States)] [Department of Physics, University of Notre Dame, Notre Dame, Indiana 46556 (United States); Surman, R. [Department of Physics and Astronomy, Union College, Schenectady, New York 12308 (United States)] [Department of Physics and Astronomy, Union College, Schenectady, New York 12308 (United States)

2014-04-15T23:59:59.000Z

422

Decay Rates for Spherical Scalar Waves in the Schwarzschild Geometry  

E-Print Network [OSTI]

The Cauchy problem is considered for the scalar wave equation in the Schwarzschild geometry. Using an integral spectral representation we derive the exact decay rate for solutions of the Cauchy problem with spherical symmetric initial data, which is smooth and compactly supported outside the event horizon.

Johann Kronthaler

2007-09-24T23:59:59.000Z

423

Event Rates for Off Axis NuMI Experiments  

E-Print Network [OSTI]

Neutrino interaction rates for experiments placed off axis in the NuMI beam are calculated. Primary proton beam energy is 120 GeV and four locations at 810 km from target and 6, 12, 30 and 40 km off axis are considered. This report is part of the Joint FNAL/BNL Future Long Baseline Neutrino Oscillation Experiment Study.

B. Viren

2006-08-25T23:59:59.000Z

424

COMMUNICATION First Principles Prediction of Protein Folding Rates  

E-Print Network [OSTI]

COMMUNICATION First Principles Prediction of Protein Folding Rates Derek A. Debe and William A studies have demonstrated that many small, single-domain proteins fold via simple two-state kinetics. We. # 1999 Academic Press Keywords: protein folding; kinetics; diffusion; fold topology; nucleation

Goddard III, William A.

425

DYNAMIC PROGRAMMING ALGORITHM FOR RATE-DISTORTION OPTIMIZED MEDIA STREAMING  

E-Print Network [OSTI]

a dynamic programming algorithm for finding optimal transmission policies for a single packet in rate the assumption as a heuris- tic principle. Simulations show that for realistic channel models, the algorithm multimedia services over the Internet [1]. In contrast to traditional video transmission systems, a video

Reiterer, Harald

426

Synthetic aperture design for increased SAR image rate  

DOE Patents [OSTI]

High resolution SAR images of a target scene at near video rates can be produced by using overlapped, but nevertheless, full-size synthetic apertures. The SAR images, which respectively correspond to the apertures, can be analyzed in sequence to permit detection of movement in the target scene.

Bielek, Timothy P. (Albuquerque, NM); Thompson, Douglas G. (Albuqerque, NM); Walker, Bruce C. (Albuquerque, NM)

2009-03-03T23:59:59.000Z

427

Quantitative temperature effects on the saponification rates of aliphatic esters  

E-Print Network [OSTI]

. Heat of Activation Entro of Activati an Free Ener o t vat on Using Eyring's basic equation40 40. S. Glasstone K. J. Laidler, H. Eyring, "The Theory of, Rate Processes, " NcGraw-Hill Book Company, Inc. , New York, N. Y. , 1941: p. 195. k = K -2 (18...

Schreck, James Otto

1962-01-01T23:59:59.000Z

428

SHORT COMMUNICATION Flow rate-modified streaming effects in heterogeneous  

E-Print Network [OSTI]

the streaming potential (Norde and Rouwendal 1990; Elgersma et al. 1992; Werner et al. 1999) or streamingSHORT COMMUNICATION Flow rate-modified streaming effects in heterogeneous microchannels Junjie Zhu relations is developed to study the streaming potential and streaming current in heterogeneous micro

Xuan, Xiangchun "Schwann"

429

Energy Productivity Via Time-of-Day Rates  

E-Print Network [OSTI]

-intensive industrial customers to lower their cost of power while at the same time improving the load characteristics of their utility supplier. This paper examines the present state of time-of-day rates and discusses steps that Air Products is taking to maximize...

Michael, R. S.

1984-01-01T23:59:59.000Z

430

Rate, molecular spectrum, and consequences of human mutation  

E-Print Network [OSTI]

, December 3, 2009 (sent for review September 13, 2009) Although mutation provides the fuel for phenotypic. Although the human per-generation mutation rate is exceptionally high, on a per-cell division basis history, dating back to Haldane (7), but Kondrashov (8) pioneered the use of allelic-sequence survey data

Dean, Matthew D.

431

Reducing Network Energy Consumption via Sleeping and Rate-Adaptation  

E-Print Network [OSTI]

Reducing Network Energy Consumption via Sleeping and Rate-Adaptation Sergiu Nedevschi Lucian Popa of two forms of power management schemes that reduce the energy consumption of networks. The first the energy consumed when actively processing packets. For real-world traffic workloads and topologies and us

California at Irvine, University of

432

Local Privacy and Minimax Bounds: Sharp Rates for Probability Estimation  

E-Print Network [OSTI]

. Jordan1,2 Martin J. Wainwright1,2 1 Department of Electrical Engineering and Computer Science 2Local Privacy and Minimax Bounds: Sharp Rates for Probability Estimation John C. Duchi1 Michael I Department of Statistics University of California, Berkeley {jduchi

Jordan, Michael I.

433

Efficient Dynamic Spectrum Sharing Through Rate Compensation and Spectrum Handoff  

E-Print Network [OSTI]

Abstract--In this work, we propose a heuristic for dynamic spectrum sharing in cognitive radio networks licensed channels available for opportunistic spectrum access. Each SU is equipped with n wEfficient Dynamic Spectrum Sharing Through Rate Compensation and Spectrum Handoff Adisorn

Paris-Sud XI, Université de

434

Housing & Residential Services Room and Board Rates 20112012  

E-Print Network [OSTI]

Housing & Residential Services Room and Board Rates 2011­2012 Campus housing offers a variety, please view the Housing & Residential Services website at: housing.iit.edu. McCormick Student Village to participate in the Residential 5 meal plan. Winter Break is included in MSV, Gunsaulus Hall and SSV. DAS room

Heller, Barbara

435

Efficiency Ratings for the Daiken AC (Americas), Inc.  

E-Print Network [OSTI]

Efficiency Ratings for the Daiken AC (Americas), Inc. Altherma Air-to-Water Source Heat Pump System is used to provide water heating, the EF for that separate water heater shall be used for performance Description Model No. Capacity (tons) Space Heating Space Cooling SEER Water Heating Efficiency

436

absorption rate sar: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

absorption rate sar First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Original Research Specific...

437

Measurement of the Formation Rate of Muonic Hydrogen Molecules  

E-Print Network [OSTI]

Background: The rate \\lambda_pp\\mu\\ characterizes the formation of pp\\mu\\ molecules in collisions of muonic p\\mu\\ atoms with hydrogen. In measurements of the basic weak muon capture reaction on the proton to determine the pseudoscalar coupling g_P, capture occurs from both atomic and molecular states. Thus knowledge of \\lambda_pp\\mu\\ is required for a correct interpretation of these experiments. Purpose: Recently the MuCap experiment has measured the capture rate \\Lambda_S from the singlet p\\mu\\ atom, employing a low density active target to suppress pp\\mu\\ formation (PRL 110, 12504 (2013)). Nevertheless, given the unprecedented precision of this experiment, the existing experimental knowledge in \\lambda_pp\\mu\\ had to be improved. Method: The MuCap experiment derived the weak capture rate from the muon disappearance rate in ultra-pure hydrogen. By doping the hydrogen with 20 ppm of argon, a competing process to pp\\mu\\ formation was introduced, which allowed the extraction of \\lambda_pp\\mu\\ from the observed t...

Andreev, V A; Carey, R M; Case, T A; Clayton, S M; Crowe, K M; Deutsch, J; Egger, J; Freedman, S J; Ganzha, V A; Gorringe, T; Gray, F E; Hertzog, D W; Hildebrandt, M; Kammel, P; Kiburg, B; Knaack, S; Kravtsov, P A; Krivshich, A G; Lauss, B; Lynch, K R; Maev, E M; Maev, O E; Mulhauser, F; Petitjean, C; Petrov, G E; Prieels, R; Schapkin, G N; Semenchuk, G G; Soroka, M A; Tishchenko, V; Vasilyev, A A; Vorobyov, A A; Vznuzdaev, M E; Winter, P

2015-01-01T23:59:59.000Z

438

The effects of flow rate and pressure on breakthrough times and permeation rates through an impermeable membrane  

E-Print Network [OSTI]

. ) the desorption of molecules from the inside surface of the material. ( Measuring the permeation rate of polymers exhibiting the activated diffusion process can be calculated by Pick's First Law of diffusion, calculated by the equation: A -E/RT q x '(p -p) P... e 1 2 o where, q = permeation rate (cm /sec) 3 A = area of membrane (cm ) 2 x = membrane thickness (cm) pl= solvent partial pressure on the outer surface of the membrane (Pa) p2= solvent partial pressure on the inner surface of the membrane (Pa...

Gilmore, Peter Lee

2012-06-07T23:59:59.000Z

439

U.S. Recordable Injury and Illness Rates and Lost Workday Rates Lowest Since BLS Began Reporting  

Broader source: Energy.gov [DOE]

Acting Assistant Secretary for the Occupational Safety and Health Administration (OSHA), Jonathan L. Snare, told a gathering of safety and health professionals at the American Society of Safety Engineers Annual National Conference in New Orleans, LA, that the nation’s recordable injury and illness rates have declined 7.1 percent from 2002 to 2003.

440

Failure Rate Data Analysis for High Technology Components  

SciTech Connect (OSTI)

Understanding component reliability helps designers create more robust future designs and supports efficient and cost-effective operations of existing machines. The accelerator community can leverage the commonality of its high-vacuum and high-power systems with those of the magnetic fusion community to gain access to a larger database of reliability data. Reliability studies performed under the auspices of the International Energy Agency are the result of an international working group, which has generated a component failure rate database for fusion experiment components. The initial database work harvested published data and now analyzes operating experience data. This paper discusses the usefulness of reliability data, describes the failure rate data collection and analysis effort, discusses reliability for components with scarce data, and points out some of the intersections between magnetic fusion experiments and accelerators.

L. C. Cadwallader

2007-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "rating cancel rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Dead-time compensation for a logarithmic display rate meter  

DOE Patents [OSTI]

An improved circuit is provided for application to a radiation survey meter that uses a detector that is subject to dead time. The circuit compensates for dead time over a wide range of count rates by producing a dead-time pulse for each detected event, a live-time pulse that spans the interval between dead-time pulses, and circuits that average the value of these pulses over time. The logarithm of each of these values is obtained and the logarithms are subtracted to provide a signal that is proportional to a count rate that is corrected for the effects of dead time. The circuit produces a meter indication and is also capable of producing an audible indication of detected events.

Larson, John A. (Aurora, IL); Krueger, Frederick P. (Aurora, IL)

1988-09-20T23:59:59.000Z

442

Dead-time compensation for a logarithmic display rate meter  

DOE Patents [OSTI]

An improved circuit is provided for application to a radiation survey meter that uses a detector that is subject to dead time. The circuit compensates for dead time over a wide range of count rates by producing a dead-time pulse for each detected event, a live-time pulse that spans the interval between dead-time pulses, and circuits that average the value of these pulses over time. The logarithm of each of these values is obtained and the logarithms are subtracted to provide a signal that is proportional to a count rate that is corrected for the effects of dead time. The circuit produces a meter indication and is also capable of producing an audible indication of detected events. 5 figs.

Larson, J.A.; Krueger, F.P.

1987-10-05T23:59:59.000Z

443

Occupational Injury Rate Estimates in Magnetic Fusion Experiments  

SciTech Connect (OSTI)

In nuclear facilities, there are two primary aspects of occupational safety. The first aspect is radiological safety, which has rightly been treated in detail in nuclear facilities. Radiological exposure data have been collected from the existing tokamaks to serve as forecasts for ITER radiation safety. The second aspect of occupational safety, “traditional” industrial safety, must also be considered for a complete occupational safety program. Industrial safety data on occupational injury rates from the JET and TFTR tokamaks, three accelerators, and U.S. nuclear fission plants have been collected to set industrial safety goals for the ITER operations staff. The results of this occupational safety data collection and analysis activity are presented here. The data show that an annual lost workday case rate of 0.3 incidents per 100 workers is a conceivable goal for ITER operations.

cadwallader, lee

2006-11-01T23:59:59.000Z

444

Semiclassical pair production rate for rotating electric fields  

E-Print Network [OSTI]

We semiclassically investigate Schwinger pair production for pulsed rotating electric fields depending on time. To do so we solve the Dirac equation for two-component fields in a WKB-like approximation. The result shows that for two-component fields the spin distribution of produced pairs is generally not $1:1$. As a result the pair creation rates of spinor and scalar quantum electro dynamics (QED) are different even for one pair of turning points. For rotating electric fields the pair creation rate is dominated by particles with a specific spin depending on the sense of rotation for a certain range of pulse lengths and frequencies. We present an analytical solution for the momentum spectrum of the constant rotating field. We find interference effects not only in the momentum spectrum but also in the total particle number of rotating electric fields.

Eckhard Strobel; She-Sheng Xue

2015-02-09T23:59:59.000Z

445

Towards hard X-ray imaging at GHz frame rate  

SciTech Connect (OSTI)

Gigahertz (GHz) imaging using hard X-rays ({approx}> 10 keV) can be useful to high-temperature plasma experiments, as well as research using coherent photons from synchrotron radiation and X-ray free electron lasers. GHz framing rate can be achieved by using multiple cameras through multiplexing. The advantages and trade-offs of single-photon detection mode, when no more than one X-ray photon is detected per pixel, are given. Two possible paths towards X-ray imaging at GHz frame rates using a single camera are (a) Avalanche photodiode arrays of high-Z materials and (b) Microchannel plate photomultipliers in conjunction with materials with large indices of refraction.

Wang, Zhehui [Los Alamos National Laboratory; Morris, Christopher [Los Alamos National Laboratory; Luo, Shengnian [Los Alamos National Laboratory; Kwiatkowski, Kris K. [Los Alamos National Laboratory; Kapustinsky, Jon S. [Los Alamos National Laboratory

2012-05-02T23:59:59.000Z

446

Towards hard x-ray imaging at GHz frame rate  

SciTech Connect (OSTI)

Gigahertz (GHz) imaging using hard x-rays ( Greater-Than-Or-Equivalent-To 10 keV) can be useful to high-temperature plasma experiments, as well as research and applications using coherent photons from synchrotron radiation and x-ray free electron lasers. GHz framing rate can be achieved by using multiple cameras through multiplexing. The advantages and trade-offs of single-photon detection mode, when no more than one x-ray photon is detected per pixel, are given. Two possible paths towards x-ray imaging at GHz frame rates using a single camera are: (a) avalanche photodiode arrays of high-Z materials and (b) microchannel plate photomultipliers in conjunction with materials with large indices of refraction.

Wang Zhehui; Morris, C. L.; Kapustinsky, J. S.; Kwiatkowski, K.; Luo, S.-N. [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)

2012-10-15T23:59:59.000Z

447

Selected component failure rate values from fusion safety assessment tasks  

SciTech Connect (OSTI)

This report is a compilation of component failure rate and repair rate values that can be used in magnetic fusion safety assessment tasks. Several safety systems are examined, such as gas cleanup systems and plasma shutdown systems. Vacuum system component reliability values, including large vacuum chambers, have been reviewed. Values for water cooling system components have also been reported here. The report concludes with the examination of some equipment important to personnel safety, atmospheres, combustible gases, and airborne releases of radioactivity. These data should be useful to system designers to calculate scoping values for the availability and repair intervals for their systems, and for probabilistic safety or risk analysts to assess fusion systems for safety of the public and the workers.

Cadwallader, L.C.

1998-09-01T23:59:59.000Z

448

Selected Component Failure Rate Values from Fusion Safety Assessment Tasks  

SciTech Connect (OSTI)

This report is a compilation of component failure rate and repair rate values that can be used in magnetic fusion safety assessment tasks. Several safety systems are examined, such as gas cleanup systems and plasma shutdown systems. Vacuum system component reliability values, including large vacuum chambers, have been reviewed. Values for water cooling system components have also been reported here. The report concludes with the examination of some equipment important to personnel safety, atmospheres, combustible gases, and airborne releases of radioactivity. These data should be useful to system designers to calculate scoping values for the availability and repair intervals for their systems, and for probabilistic safety or risk analysts to assess fusion systems for safety of the public and the workers.

Cadwallader, Lee Charles

1998-09-01T23:59:59.000Z

449

High repetition rate plasma mirror device for attosecond science  

SciTech Connect (OSTI)

This report describes an active solid target positioning device for driving plasma mirrors with high repetition rate ultra-high intensity lasers. The position of the solid target surface with respect to the laser focus is optically monitored and mechanically controlled on the nm scale to ensure reproducible interaction conditions for each shot at arbitrary repetition rate. We demonstrate the target capabilities by driving high-order harmonic generation from plasma mirrors produced on glass targets with a near-relativistic intensity few-cycle pulse laser system operating at 1 kHz. During experiments, residual target surface motion can be actively stabilized down to 47?nm (root mean square), which ensures sub-300-as relative temporal stability of the plasma mirror as a secondary source of coherent attosecond extreme ultraviolet radiation in pump-probe experiments.

Borot, A.; Douillet, D.; Iaquaniello, G.; Lefrou, T.; Lopez-Martens, R. [Laboratoire d'Optique Appliquée, ENSTA-ParisTech, CNRS, Ecole Polytechnique, UMR 7639, 91761 Palaiseau (France)] [Laboratoire d'Optique Appliquée, ENSTA-ParisTech, CNRS, Ecole Polytechnique, UMR 7639, 91761 Palaiseau (France); Audebert, P.; Geindre, J.-P. [Laboratoire pour l'Utilisation des Lasers Intenses, Ecole Polytechnique, CNRS, 91128 Palaiseau Cedex (France)] [Laboratoire pour l'Utilisation des Lasers Intenses, Ecole Polytechnique, CNRS, 91128 Palaiseau Cedex (France)

2014-01-15T23:59:59.000Z

450

Sensitivity studies for the weak r process: neutron capture rates  

SciTech Connect (OSTI)

Rapid neutron capture nucleosynthesis involves thousands of nuclear species far from stability, whose nuclear properties need to be understood in order to accurately predict nucleosynthetic outcomes. Recently sensitivity studies have provided a deeper understanding of how the r process proceeds and have identified pieces of nuclear data of interest for further experimental or theoretical study. A key result of these studies has been to point out the importance of individual neutron capture rates in setting the final r-process abundance pattern for a ‘main’ (A ? 130 peak and above) r process. Here we examine neutron capture in the context of a ‘weak’ r process that forms primarily the A ? 80 r-process abundance peak. We identify the astrophysical conditions required to produce this peak region through weak r-processing and point out the neutron capture rates that most strongly influence the final abundance pattern.

Surman, R., E-mail: surmanr@union.edu [Department of Physics and Astronomy, Union College, Schenectady, NY 12308 (United States); Mumpower, M. [Department of Physics, University of Notre Dame, Notre Dame, IN 46556 (United States)] [Department of Physics, University of Notre Dame, Notre Dame, IN 46556 (United States); Sinclair, R.; Jones, K. L. [Department of Physics and Astronomy, University of Tennessee, Knoxville, TN 37996 (United States)] [Department of Physics and Astronomy, University of Tennessee, Knoxville, TN 37996 (United States); Hix, W. R. [Department of Physics and Astronomy, University of Tennessee, Knoxville, TN 37996 (United States) [Department of Physics and Astronomy, University of Tennessee, Knoxville, TN 37996 (United States); Physics Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831 (United States); McLaughlin, G. C. [Department of Physics, North Carolina State University, Raleigh, NC 27695 (United States)] [Department of Physics, North Carolina State University, Raleigh, NC 27695 (United States)

2014-04-15T23:59:59.000Z

451

Etch rate modeling for ion-irradiated nitrocellulose  

SciTech Connect (OSTI)

The self-developing mechanism of nitrocellulose when used as an ion beam resist is described by a model predicting the evolution of the etch rate versus irradiation time. Fundamentals of the model based on ion energy deposition dependent ablative development along with related mathematical derivations are given and briefly discussed. Comparison between theoretical results and experimental data available for protons at 20 keV and Ne{sup +}, Ar{sup +}, Kr{sup +} ions at 150 keV is made and shows a good agreement. This result clearly does not conflict with our assumption that the nitrocellulose etch rate is dependent on the total ion deposited energy no matter how the energy is deposited.

Merhari, L.; Belorgeot, C.; Moliton, J.P. (Laboratoire d'electronique des Polymeres sous Faisceaux Ioniques, 123, Avenue Albert Thomas, 87060 Limoges Cedex (France))

1990-12-24T23:59:59.000Z

452

Rate Structures for Customers With Onsite Generation: Practice and Innovation  

SciTech Connect (OSTI)

Recognizing that innovation and good public policy do not always proclaim themselves, Synapse Energy Economics and the Regulatory Assistance Project, under a contract with the California Energy Commission (CEC) and the National Renewable Energy Laboratory (NREL), undertook a survey of state policies on rates for partial-requirements customers with onsite distributed generation. The survey investigated a dozen or so states. These varied in geography and the structures of their electric industries. By reviewing regulatory proceedings, tariffs, publications, and interviews, the researchers identified a number of approaches to standby and associated rates--many promising but some that are perhaps not--that deserve policymakers' attention if they are to promote the deployment of cost-effective DG in their states.

Johnston, L.; Takahashi, K.; Weston, F.; Murray, C.

2005-12-01T23:59:59.000Z

453

Influence of Multiplicative Stochastic Variation on Translational Elongation Rates  

E-Print Network [OSTI]

Recent experiments have shown that stochastic effects exerted at the level of translation contribute a substantial portion of the variation in abundance of proteins expressed at moderate to high levels. This study analyzes translational noise arising from fluctuations in residue-specific elongation rates. The resulting variation has multiplicative components that lead individual protein abundances in a population to exhibit approximately log-normal behavior. The high variability inherent in the process leads to parameter variation that has the features of a type of noise in biological systems that has been characterized as extrinsic. Elongation rate variation offers an accounting for a major component of extrinsic noise, and the analysis provided here highlights a probability distribution that is a natural extension of the Poisson and has broad applicability to many types of multiplicative noise processes.

Sandip Datta; Brian Seed

2014-09-15T23:59:59.000Z

454

Temporal variations of solar rotation rate at high latitudes  

E-Print Network [OSTI]

Frequency splitting coefficients from Global Oscillation Network Group (GONG) and Michelson Doppler Imager (MDI) observations covering the period 1995--2001 are used to study temporal variations in the solar rotation rate at high latitudes. The torsional oscillation pattern in the Sun is known to penetrate to a depth of about $0.1R_\\odot$ with alternate bands of faster and slower rotating plasma. At lower latitudes the bands move towards equator with time. At higher latitudes, however, the bands appear to move towards the poles. This is similar to the observed pole-ward movement of large scale magnetic fields at high latitudes. This also supports theoretical results of pole-ward moving bands at high latitudes in some mean field dynamo models. The polar rotation rate is found to decrease between 1995 and 1999 after which it has started increasing.

H. M. Antia; Sarbani Basu

2001-08-14T23:59:59.000Z

455

Total Gamma Count Rate Analysis Method for Nondestructive Assay Characterization  

SciTech Connect (OSTI)

A new approach to nondestructively characterize waste for disposal, based on total gamma response, has been developed at the Idaho Cleanup Project by CH2M-WG Idaho, LLC and Idaho State University, and is called the total gamma count rate analysis method. The total gamma count rate analysis method measures gamma interactions that produce energetic electrons or positrons in a detector. Based on previous experience with waste assays, the radionuclide content of the waste container is then determined. This approach potentially can yield minimum detection limits of less than 10 nCi/g. The importance of this method is twofold. First, determination of transuranic activity can be made for waste containers that are below the traditional minimum detection limits. Second, waste above 10 nCi/g and below 100 nCi/g can be identified, and a potential path for disposal resolved.

Cecilia R. Hoffman; Yale D. Harker

2006-03-01T23:59:59.000Z

456

Variable temperature effects on release rates of readily soluble nuclides  

SciTech Connect (OSTI)

In this paper we study the effect of temperature on the release rate of readily soluble nuclides, as affected by a time-temperature dependent diffusion coefficient. In this analysis ground water fills the voids in the waste package at t = 0 and one percent of the inventories of cesium and iodine are immediately dissolved into the void water. Mass transfer resistance of partly failed container and cladding is conservatively neglected. The nuclides move through the void space into the surrounding rock under a concentration gradient. We use an analytic solution to compute the nuclide concentration in the gap or void, and the mass flux rate into the porous rock. 8 refs., 4 figs.

Kim, C.-L.; Light, W.B.; Lee, W.W.-L.; Chambre, P.L.; Pigford, T.H. (Korea Advanced Energy Research Inst., Daeduk (Republic of Korea); Lawrence Berkeley Lab., CA (USA))

1988-09-01T23:59:59.000Z

457

Beamforming and Rate Allocation in MISO Cognitive Radio Networks  

E-Print Network [OSTI]

We consider decentralized multi-antenna cognitive radio networks where secondary (cognitive) users are granted simultaneous spectrum access along with license-holding (primary) users. We treat the problem of distributed beamforming and rate allocation for the secondary users such that the minimum weighted secondary rate is maximized. Such an optimization is subject to (1) a limited weighted sum-power budget for the secondary users and (2) guaranteed protection for the primary users in the sense that the interference level imposed on each primary receiver does not exceed a specified level. Based on the decoding method deployed by the secondary receivers, we consider three scenarios for solving this problem. In the first scenario each secondary receiver decodes only its designated transmitter while suppressing the rest as Gaussian interferers (single-user decoding). In the second case each secondary receiver employs the maximum likelihood decoder (MLD) to jointly decode all secondary transmissions, and in the t...

Tajer, Ali; Wang, Xiaodong

2009-01-01T23:59:59.000Z

458

Screening in Thermonuclear Reaction Rates in the Sun  

E-Print Network [OSTI]

We evaluate the effect of electrostatic screening by ions and electrons on low-Z thermonuclear reactions in the sun. We use a mean field formalism and calculate the electron density of the screening cloud using the appropriate density matrix equation of quantum statistical mechanics. Because of well understood physical effects that are included for the first time in our treatment, the calculated enhancement of reaction rates does not agree with the frequently used interpolation formulae. Our result does agree, within small uncertainties, with Salpeter's weak screening formula. If weak screening is used instead of the commonly employed screening prescription of Graboske et al., the predicted $^8$B neutrino flux is increased by 7% and the predicted chlorine rate is increased by 0.4 SNU.

Andrei V. Gruzinov; John N. Bahcall

1998-01-20T23:59:59.000Z

459

Removal Rate Model for Magnetorheological Finishing of Glass  

SciTech Connect (OSTI)

Magnetorheological finishing (MRF) is a deterministic subaperture polishing process. The process uses a magntorheological (MR) fluid that consists of micrometer-sized, spherical, magnetic carbonyl iron (CI) particles, nonmagnetic polishing abrasives, water, and stabilizers. Material removal occurs when the CI and nonmagnetic polishing abrasives shear material off the surface being polished. We introduce a new MRF material removal rate model for glass. This model contains terms for the near surface mechanical properties of glass, drag force, polishing abrasive size and concentration, chemical durability of the glass, MR fluid pH, and the glass composition. We introduce quantitative chemical predictors for the first time, to the best of our knowledge, into an MRF removal rate model. We validate individual terms in our model separately and then combine all of the terms to show the whole MRF material removal model compared with experimental data. All of our experimental data were obtained using nanodiamond MR fluids and a set of six optical glasses.

DeGroote, J.E.; Marino, A.E.; WIlson, J.P.; Bishop, A.L.; Lambropoulos, J.C.; Jacobs, S.D.

2007-11-14T23:59:59.000Z

460

Radiation dose-rate meter using an energy-sensitive counter  

DOE Patents [OSTI]

A radiation dose-rate meter is provided which uses an energy-sensitive detector and combines charge quantization and pulse-rate measurement to monitor radiation dose rates. The charge from each detected photon is quantized by level-sensitive comparators so that the resulting total output pulse rate is proportional to the dose-rate.

Kopp, Manfred K. (Oak Ridge, TN)

1988-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "rating cancel rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Production rate of cosmogenic 21 Ne in quartz estimated from 10  

E-Print Network [OSTI]

Production rate of cosmogenic 21 Ne in quartz estimated from 10 Be, 26 Al, and 21 Ne concentrations Antarctica production rate calibration We estimated the production rate of 21 Ne in quartz using a set production rate. As the erosion rate can be determined from 10 Be and 26 Al concentrations, this allows

Shuster, David L.

462

Method for enhancing microbial utilization rates of gases using perfluorocarbons  

DOE Patents [OSTI]

A method of enhancing the bacterial reduction of industrial gases using perfluorocarbons (PFCs) is disclosed. Because perfluorocarbons (PFCs) allow for a much greater solubility of gases than water does, PFCs have the potential to deliver gases in higher concentrations to microorganisms when used as an additive to microbial growth media thereby increasing the rate of the industrial gas conversion to economically viable chemicals and gases.

Turick, Charles E. (Idaho Falls, ID)

1997-01-01T23:59:59.000Z

463

Data Bias in Rate Transient Analysis of Shale Gas Wells  

E-Print Network [OSTI]

) ......................................................................................................... 10 6 Rate and time relationship developed by Gentry (1972) ............................ 11 7 Fetkovich type-curves ................................................................................ 13 8 Gas type-curves developed by Carter (1985... the production data analyst to the proper use of superposition diagnostic plots ? To program a VBA program that performs proper use of superposition time functions according to the proposed work flow. 5 1.4 Organization of the thesis This report...

Agnia, Ammar Khalifa Mohammed

2012-07-16T23:59:59.000Z

464

NAC-1 cask dose rate calculations for LWR spent fuel  

SciTech Connect (OSTI)

A Nuclear Assurance Corporation nuclear fuel transport cask, NAC-1, is being considered as a transport and storage option for spent nuclear fuel located in the B-Cell of the 324 Building. The loaded casks will be shipped to the 200 East Area Interim Storage Area for dry interim storage. Several calculations were performed to assess the photon and neutron dose rates. This report describes the analytical methods, models, and results of this investigation.

CARLSON, A.B.

1999-02-24T23:59:59.000Z

465

Reaction Rate Sensitivity of the gamma-Process Path  

E-Print Network [OSTI]

The location of the (gamma,p)/(gamma,n) and (gamma,alpha)/(gamma,n) line at gamma-process temperatures is discussed, using recently published reaction rates based on global Hauser-Feshbach calculations. The results can directly be compared to previously published, classic gamma-process discussions. The nuclei exhibiting the largest sensitivity to uncertainties in nuclear structure and reaction parameters are specified.

T. Rauscher

2004-07-16T23:59:59.000Z

466

Method for enhancing microbial utilization rates of gases using perfluorocarbons  

DOE Patents [OSTI]

A method of enhancing the bacterial reduction of industrial gases using perfluorocarbons (PFCs) is disclosed. Because perfluorocarbons (PFCs) allow for a much greater solubility of gases than water does, PFCs have the potential to deliver gases in higher concentrations to microorganisms when used as an additive to microbial growth media thereby increasing the rate of the industrial gas conversion to economically viable chemicals and gases. 3 figs.

Turick, C.E.

1997-06-10T23:59:59.000Z

467

Variable rate CELP speech coding using widely variable parameter updates  

E-Print Network [OSTI]

. Speech Coding . B. Speech Model C. Spectral Modeling . 1. Spectral Envelope 2. Spectral Fine Structure II CODE-EXCITED LINEAR PREDICTION . A. Description 1. Linear-Prediction-Based Analysis-by-Synthesis 2. Excitation Encoding . 3. Excitation... Algorithms C. Coding Rate . D. Speech Quality V CONCLUSIONS . . Coding 1 2 3 5 13 16 16 18 20 21 23 26 28 29 40 40 43 46 52 57 REFERENCES 59 VITA vn LIST OF TABLES TABLE Page Threshold values for the automatic algorithms. 47...

Moodie, Myron L.

1995-01-01T23:59:59.000Z

468

Commercial Building Asset Rating Program | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTieCelebrate Earth Codesthe Natural Resources DefenseonAsset Rating

469

Strain Rate Characterization of Advanced High Strength Steels | Department  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of Energy Strain Rate Characterization of Advanced High Strength Steels

470

Generating Facility Rate-Making | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating Solar Power Basics (TheEtelligenceGainSpanRate-Making Jump to: navigation, search This

471

Error rate and power dissipation in nano-logic devices  

E-Print Network [OSTI]

and content by: Laszlo B. Kish (Chair of Commitpte) Ed anc ez-Sinencio (Member) song g (Member) William Marlow (Member) nan Singh (Head of Department) May 2004 Major Subject: Electrical Engineering 111 ABSTRACT Error Rate and Power Dissipation... in Nano-Logic Devices. (May 2004) Jong Un Kim, B. S. ; M. S. ; Ph. D. , Seoul National University Chair of Advisory Committee: Dr. Laszlo B. Kish Current-controlled logic and single electron logic processors have been investigated with respect...

Kim, Jong Un

2004-01-01T23:59:59.000Z

472

Coral Extension Rate Analysis Using Computed Axial Tomography  

E-Print Network [OSTI]

CORAL EXTENSION RATE ANALYSIS USING COMPUTED AXIAL TOMOGRAPHY A Thesis by ELEANOR ANN YUDELMAN Submitted to the Office of Graduate and Professional Studies of Texas A&M University in partial fulfillment of the requirements for the degree... of MASTER OF SCIENCE Chair of Committee, Niall Slowey Committee Members, Deborah Thomas Benjamin Giese George P. Schmahl Head of Department, Deborah Thomas May 2014 Major Subject: Oceanography Copyright 2014 Eleanor Ann Yudelman ii ABSTRACT...

Yudelman, Eleanor Ann

2014-01-10T23:59:59.000Z

473

A CODEC for low to medium bit-rate video  

E-Print Network [OSTI]

(Members J. W. Howze (Head of Department) May 1990 A CODEC for Low to Medium Bit-rate Video. (May 1990) Victor Byron Taylor, B. S. , Texas A&M University; Chair of Advisory Committee: Dr. Jerry Gibson The compensated lattice quantizer (COMLAQ), is a... source coder/decoder (CODEC) designed for limited-motion videoconferencing applications. Our CODEC is based on four data compression strategies: lattice vector quantization, DPCM, transform coding, and simple interl'rame motion compensation. Designed...

Taylor, Victor Byron

1990-01-01T23:59:59.000Z

474

The Gamma Ray Burst Rate at High Photon Energies  

E-Print Network [OSTI]

Some gamma-ray burst (GRB) spectra exhibit high energy tails with the highest photon energy detected at 18 GeV. The spectral slope of the high-energy tails is sufficiently flat in nu F_nu to consider the possibility of their detection at still higher energies. We calculate how many bursts can reasonably be expected above a given energy threshold for a cosmological distribution of bursts satisfying the observed apparent brightness distribution. The crucial point is that the gamma-ray absorption by pair production in the intergalactic diffuse radiation field eliminates bursts from beyond the gamma-ray horizon tau ~ 1, thus drastically reducing the number of bursts at high energies. Our results are consistent with the non-detection of bursts by current experiments in the 100 GeV to 100 TeV energy range. For the earth-bound detector array MILAGRO, we predict a maximal GRB rate of ~ 10 events per year. The Whipple Observatory can detect, under favorable conditions, ~1 event per year. The event rate for the HEGRA array is ~ 0.01 per year. Detection of significantly higher rates of bursts would severely challenge cosmological burst scenarios.

Karl Mannheim; Dieter Hartmann; Burkhardt Funk

1996-05-17T23:59:59.000Z

475

Cloud Properties and Radiative Heating Rates for TWP  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

A cloud properties and radiative heating rates dataset is presented where cloud properties retrieved using lidar and radar observations are input into a radiative transfer model to compute radiative fluxes and heating rates at three ARM sites located in the Tropical Western Pacific (TWP) region. The cloud properties retrieval is a conditional retrieval that applies various retrieval techniques depending on the available data, that is if lidar, radar or both instruments detect cloud. This Combined Remote Sensor Retrieval Algorithm (CombRet) produces vertical profiles of liquid or ice water content (LWC or IWC), droplet effective radius (re), ice crystal generalized effective size (Dge), cloud phase, and cloud boundaries. The algorithm was compared with 3 other independent algorithms to help estimate the uncertainty in the cloud properties, fluxes, and heating rates (Comstock et al. 2013). The dataset is provided at 2 min temporal and 90 m vertical resolution. The current dataset is applied to time periods when the MMCR (Millimeter Cloud Radar) version of the ARSCL (Active Remotely-Sensed Cloud Locations) Value Added Product (VAP) is available. The MERGESONDE VAP is utilized where temperature and humidity profiles are required. Future additions to this dataset will utilize the new KAZR instrument and its associated VAPs.

Comstock, Jennifer

476

Radionuclide release rates from spent fuel for performance assessment modeling  

SciTech Connect (OSTI)

In a scenario of aqueous transport from a high-level radioactive waste repository, the concentration of radionuclides in water in contact with the waste constitutes the source term for transport models, and as such represents a fundamental component of all performance assessment models. Many laboratory experiments have been done to characterize release rates and understand processes influencing radionuclide release rates from irradiated nuclear fuel. Natural analogues of these waste forms have been studied to obtain information regarding the long-term stability of potential waste forms in complex natural systems. This information from diverse sources must be brought together to develop and defend methods used to define source terms for performance assessment models. In this manuscript examples of measures of radionuclide release rates from spent nuclear fuel or analogues of nuclear fuel are presented. Each example represents a very different approach to obtaining a numerical measure and each has its limitations. There is no way to obtain an unambiguous measure of this or any parameter used in performance assessment codes for evaluating the effects of processes operative over many millennia. The examples are intended to suggest by example that in the absence of the ability to evaluate accuracy and precision, consistency of a broadly based set of data can be used as circumstantial evidence to defend the choice of parameters used in performance assessments.

Curtis, D.B.

1994-11-01T23:59:59.000Z

477

Universal Parametrization of Thermal Photon Rates in Hadronic Matter  

E-Print Network [OSTI]

Electromagnetic (EM) radiation off strongly interacting matter created in high-energy heavy-ion collisions (HICs) encodes information on the high-temperature phases of nuclear matter. Microscopic calculations of thermal EM emission rates are usually rather involved and not readily accessible to broad applications in models of the fireball evolution which are required to compare to experimental data. An accurate and universal parametrization of the microscopic calculations is thus key to honing the theory behind the EM spectra. Here we provide such a parametrization for photon emission rates from hadronic matter, including the contributions from in-medium rho mesons (which incorporate effects from anti-/baryons), as well as Bremsstrahlung from pi-pi scattering. Individual parametrizations for each contribution are numerically determined through nested fitting functions for photon energies from 0.2 to 5 GeV in chemically equilibrated matter of temperatures 100-180 MeV and baryon chemical potentials 0-400 MeV. Special care is taken to extent the parameterizations to chemical off-equilibrium as encountered in HICs after chemical freezeout. This provides a functional description of thermal photon rates within a 20% variation of the microscopically calculated values.

Matthew Heffernan; Paul Hohler; Ralf Rapp

2014-11-25T23:59:59.000Z

478

Prediction of the heat release rate of wood  

SciTech Connect (OSTI)

A model for the heat release rate of wood during flaming combustion was developed during this research. It includes the effects of char shrinkage, multiple chemical components, adsorbed moisture, internal convective cooling and the variation of the thermophysical and thermochemical properties with temperature and the mass retention fraction of the char. It does not include char oxidation or diffusion of moisture and volatile pyrolysis products toward the rear surface. It calculates the time to ignition, mass burning rate, heat release rate, heat of combustion, heat of gasification and depth of char. An important part of this research was the determination of the thermochemical and thermophysical properties required by the model. An apparatus was developed for determining the kinetic parameters and the heat of combustion of the volatiles under conditions similar to those in the interior of a flaming slab of wood. Data were obtained on each of the four major chemical components present in Douglas fir. Thermal diffusivity measurements on Douglas fir and its char yielded an average value of 2.1 {times} 10{sup {minus}7} s{sup 2}/s which was nearly independent of temperature and mass retention fraction of the char for temperature sup to 500{degree}C and for mass-retention fractions above 0.30.

Parker, W.J.

1988-01-01T23:59:59.000Z

479

Cloud Properties and Radiative Heating Rates for TWP  

SciTech Connect (OSTI)

A cloud properties and radiative heating rates dataset is presented where cloud properties retrieved using lidar and radar observations are input into a radiative transfer model to compute radiative fluxes and heating rates at three ARM sites located in the Tropical Western Pacific (TWP) region. The cloud properties retrieval is a conditional retrieval that applies various retrieval techniques depending on the available data, that is if lidar, radar or both instruments detect cloud. This Combined Remote Sensor Retrieval Algorithm (CombRet) produces vertical profiles of liquid or ice water content (LWC or IWC), droplet effective radius (re), ice crystal generalized effective size (Dge), cloud phase, and cloud boundaries. The algorithm was compared with 3 other independent algorithms to help estimate the uncertainty in the cloud properties, fluxes, and heating rates (Comstock et al. 2013). The dataset is provided at 2 min temporal and 90 m vertical resolution. The current dataset is applied to time periods when the MMCR (Millimeter Cloud Radar) version of the ARSCL (Active Remotely-Sensed Cloud Locations) Value Added Product (VAP) is available. The MERGESONDE VAP is utilized where temperature and humidity profiles are required. Future additions to this dataset will utilize the new KAZR instrument and its associated VAPs.

Comstock, Jennifer

2013-11-07T23:59:59.000Z

480

The Exposure Rate Conversion Factor for Nuclear Fallout  

SciTech Connect (OSTI)

Nuclear fallout is comprised of approximately 2000 radionuclides. About 1000 of these radionuclides are either primary fission products or activated fission products that are created during the burn process. The exposure rate one meter above the surface produced by this complex mixture of radionuclides varies rapidly with time since many of the radionuclides are short-lived and decay numerous times before reaching a stable isotope. As a result, the mixture of radionuclides changes rapidly with time. Using a new code developed at the Lawrence Livermore National Laboratory, the mixture of radionuclides at any given point in time can be calculated. The code also calculates the exposure rate conversion factor (ECF) for all 3864 individual isotopes contained in its database based on the total gamma energy released per decay. Based on the combination of isotope mixture and individual ECFs, the time-dependent variation of the composite exposure rate conversion factor for nuclear fallout can be easily calculated. As example of this new capability, a simple test case corresponding to a 10 kt, uranium-plutonium fuel has been calculated. The results for the time-dependent, composite ECF for this test case are shown in Figure 1. For comparison, we also calculated the composite exposure rate conversion factor using the conversion factors found in Federal Guidance Report No.12 (FGR-12) published by ORNL, which contains the conversion factors for approximately 1000 isotopes. As can be noted from Figure 1, the two functions agree reasonably well at times greater than about 30 minutes. However, they do not agree at early times since FGR-12 does not include all of the short-lived isotopes that are produced in nuclear fallout. It should also be noted that the composite ECF at one hour is 19.7 R/hr per Ci/m{sup 2}. This corresponds to 3148 R/hr per 1 kt per square mile, which agrees reasonably well with the value of 3000 R/hr per 1 kt per square mile as quoted by Glasstone. We have also tabulated the top 50 contributors to the exposure rate at various points in time following a detonation. These major contributors are given in Table 1.

Spriggs, G D

2009-02-11T23:59:59.000Z

Note: This page contains sample records for the topic "rating cancel rating" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Cancellation of Directives  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

Effective immediately SEN-17-90, Coordination of Global Climate Change Activities, dated 2-20-90; and SEN-19A-92, Department of Energy Executive Committee, dated 7-7-92 are canceled. Cancels SEN-17-90, SEN-19A-92.

2009-08-26T23:59:59.000Z

482

Shock Compression and Strain Rate Effect in Composites and Polymers  

SciTech Connect (OSTI)

Polymers are increasingly being utilized as monolithic materials and composite matrices for structural applications historically reserved for metals. High strain and high strain-rate applications in aerospace, defense, and automotive industries have lead to interest in utilizing the ability of many polymers to withstand extensions to failure of several hundred percent, often without localization or necking and their strong rate dependence. A broad range of characterization techniques will be presented for semi-crystalline polymers and composites including elastic-plastic fracture, split Hopkinson pressure bar (SHPB), plate impact including soft-recovery and lateral gage measurements and Taylor Impact. Gas-launched, plate impact experiments have been performed on pedigreed PTFE 7C, mounted in momentum-trapped, shock assemblies, with impact pressures above and below the phase II to phase III crystalline transition to probe subtle changes in the crystallinity, microstructure, and mechanical response of PTFE. Observed strong anisotropy on the hugoniot and spall behavior of fiber-reinforced composites will be discussed. Polymers are known to exhibit a strong dependence of the yield stress on temperature and strain-rate that are often observed to be linear for temperature and logarithmic for strain-rate. Temperature and strain-rate dependence will be reviewed in terms of classic time-temperature superposition and an empirical mapping function for superposition between temperature and strain-rate. The recent extension of the new Dynamic-Tensile-Extrusion (Dyn-Ten-Ext) technique to probe the dynamic tensile responses of polymers will be discussed, where more irregular deformation and stochastic-based damage and failure mechanisms than the stable plastic elongation and shear instabilities observed that in metals. The opportunity to use of Dyn-Ten-Ext to probe incipient damage at very high strain-rate by linking in situ and post mortem experimental observations with high-fidelity simulation will be introduced. The potential to study polymer deformation under even more extreme conditions by employing explosive drive to induce Rayleigh-Taylor (RT) growth linking with in situ diagnosis by proton radiography will be proposed. Finally, a case study of collaboration between experimentalists and modelers to study the shock induced phase transition of PTFE presented. Building on a history of shock and Diamond Anvil Cell data it has long been know that PTFE exhibits a pressure induced phase transition at 0.7 GPa. The transition has historically been assumed and reported to be dependent on the hydrostatic pressure. However, studies employing neutron diffraction have suggested the phase transition is driven by only the principle stress applied to the compliant direction of crystalline domain. A multiphase model based on the Maxwell-type viscoelastic formulation was developed to include the stress deviator to drive potential martensitic transition and time to reflects the kinetic nature of the transitions demonstrating the need to account for both a martensitic nature and kinetics of the transition to capture subtle experimental observables.

Brown, Eric [Los Alamos National Laboratory

2012-06-20T23:59:59.000Z

483

VARIABLE FIRING RATE OIL BURNER USING PULSE FUEL FLOW CONTROL.  

SciTech Connect (OSTI)

The residential oil burner market is currently dominated by the pressure-atomized retention head burner, which has an excellent reputation for reliability and efficiency. In this burner, oil is delivered to a fuel nozzle at pressures from 100 to 150 psi. In addition, to atomizing the fuel, the small, carefully controlled size of the nozzle exit orifice serves to control the burner firing rate. Burners of this type are currently available at firing rates of more than 0.5 gallons-per-hour (70,000 Btu/hr). Nozzles have been made for lower firing rates, but experience has shown that such nozzles suffer rapid fouling of the necessarily small passages, leading to bad spray patterns and poor combustion performance. Also, traditionally burners and the nozzles are oversized to exceed the maximum demand. Typically, this is figured as follows. The heating load of the house on the coldest day for the location is considered to define the maximum heat load. The contractor or installer adds to this to provide a safety margin and for future expansion of the house. If the unit is a boiler that provides domestic hot water through the use of a tankless heating coil, the burner capacity is further increased. On the contrary, for a majority of the time, the heating system is satisfying a much smaller load, as only rarely do all these demands add up. Consequently, the average output of the heating system has to be much less than the design capacity and this is accomplished by start and stop cycling operation of the system so that the time-averaged output equals the demand. However, this has been demonstrated to lead to overall efficiencies lower than the steady-state efficiency. Therefore, the two main reasons for the current practice of using oil burners much larger than necessary for space heating are the unavailability of reliable low firing rate oil burners and the desire to assure adequate input rate for short duration, high draw domestic hot water loads. One approach to solve this problem is to develop a burner, which can operate at two firing rates, with the lower rate being significantly lower than 0.5 gallons per hour. This paper describes the initial results of adopting this approach through a pulsed flow nozzle. It has been shown that the concept of flow modulation with a small solenoid valve is feasible. Especially in the second configuration tested, where the Lee valve was integrated with the nozzle, reasonable modulation in flow of the order of 1.7 could be achieved. For this first prototype, the combustion performance is still not quite satisfactory. Improvements in operation, for example by providing a sharp and positive shut-off so that there is no flow under low pressures with consequent poor atomization could lead to better combustion performance. This could be achieved by using nozzles that have shut off or check valves for example. It is recommended that more work in cooperation with the valve manufacturer could produce a technically viable system. Marketability is of course a far more complex problem to be addressed once a technically viable product is available.

KRISHNA,C.R.; BUTCHER,T.A.; KAMATH,B.R.

2004-10-01T23:59:59.000Z

484

How do I Build Apps with Utility Rate Data (that is continuously...  

Open Energy Info (EERE)

Rate Kch's picture Submitted by Kch(24) Member 23 April, 2012 - 10:31 utility rate web services There's a need among our users to incorporate the electricity rates from the...

485

Oil Bypass Filter and Diesel Engine Idling Wear-Rate Evaluations...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Bypass Filter and Diesel Engine Idling Wear-Rate Evaluations Oil Bypass Filter and Diesel Engine Idling Wear-Rate Evaluations 2005 Diesel Engine Emissions Reduction (DEER)...

486

E-Print Network 3.0 - atpase rate-limiting adp Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and step 2 is a rate-limiting isomerization to a state of enhanced pyrene... that ATP hydrolysis is rate limiting, previous ... Source: Pollard, Thomas D.- Department of...

487

E-Print Network 3.0 - arteriosus success rate Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

results for: arteriosus success rate Page: << < 1 2 3 4 5 > >> 1 Blood pressures and heart rate during larval development in the anuran amphibian Xenopus laevis Summary:...

488

An Experimental Study of the Dissolution Rates of SimulatedAluminobor...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Experimental Study of the Dissolution Rates of Simulated Aluminoborosilicate Waste Glasses as a Function of pH and An Experimental Study of the Dissolution Rates of Simulated...

489

E-Print Network 3.0 - algal growth rate Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

growth rate was limited by organic C or inorganic P. The algal density... growth rate was energy limited. However, above that light intensity. algal density increased... of...

490

Fact #833: August 11, 2014 Fuel Economy Rated Second Most Important...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

3: August 11, 2014 Fuel Economy Rated Second Most Important Vehicle Attribute Fact 833: August 11, 2014 Fuel Economy Rated Second Most Important Vehicle Attribute A 2014 survey...

491

Dissolution rates of uranium compounds in simulated lung fluid  

SciTech Connect (OSTI)

Maximum dissolution rates of uranium into simulated lung fluid from a variety of materials were measured at 37/sup 0/in the where f/sub i/ is in order to estimate clearance rates from the deep lung. A batch procedure was utilized in which samples containing as little as 10 ..mu..g of natural uranium could be tested. The materials included: products of uranium mining, milling and refining operations, coal fly ash, an environmental sample from a site exposed to multiple uranium sources, and purified samples of (NH/sub 4/)/sub 2/U/sub 2/O/sub 7/ U/sub 3/O/sub 8/, UO/sub 2/, and UF/sub 4/. Dissolution of uranium from several materials indicated the presence of more than one type of uranium compound; but in all cases, the fraction F of uranium remaining undissolved at any time t could be represented by the sum of up to three terms in the series: F = ..sigma../sub i/f/sub i/ exp (-0.693t/UPSILON/sub i/), where f/sub i/ is the initial fraction of component i with dissolution half-time epsilon/sub i/. Values of epsilon/sub i/ varied from 0.01 day to several thousand days depending on the physical and chemical form of the uranium. Dissolution occurred predominantly by formation of the (UO/sub 2/(CO/sub 3/)/sub 3/)/sup 4 -/ ion; and as a result, tetravalent uranium compounds dissolved slowly. Dissolution rates of size-separated yellow-cake aerosols were found to be more closely correlated with specific surface area than with aerodynamic diameter.

Kalkwarf, D.R.

1981-01-01T23:59:59.000Z

492

High Rate Laser Pitting Technique for Solar Cell Texturing  

SciTech Connect (OSTI)

High rate laser pitting technique for solar cell texturing Efficiency of crystalline silicon solar cells can be improved by creating a texture on the surface to increase optical absorption. Different techniques have been developed for texturing, with the current state-of-the-art (SOA) being wet chemical etching. The process has poor optical performance, produces surfaces that are difficult to passivate or contact and is relatively expensive due to the use of hazardous chemicals. This project shall develop an alternative process for texturing mc-Si using laser micromachining. It will have the following features compared to the current SOA texturing process: -Superior optical surfaces for reduced front-surface reflection and enhanced optical absorption in thin mc-Si substrates -Improved surface passivation -More easily integrated into advanced back-contact cell concepts -Reduced use of hazardous chemicals and waste treatment -Similar or lower cost The process is based on laser pitting. The objective is to develop and demonstrate a high rate laser pitting process which will exceed the rate of former laser texturing processes by a factor of ten. The laser and scanning technologies will be demonstrated on a laboratory scale, but will use inherently technologies that can easily be scaled to production rates. The drastic increase in process velocity is required for the process to be implemented as an in-line process in PV manufacturing. The project includes laser process development, development of advanced optical systems for beam manipulation and cell reflectivity and efficiency testing. An improvement of over 0.5% absolute in efficiency is anticipated after laser-based texturing. The surface textures will be characterized optically, and solar cells will be fabricated with the new laser texturing to ensure that the new process is compatible with high-efficiency cell processing. The result will be demonstration of a prototype process that is suitable for scale-up to a production tool and process. The developed technique will have an reducing impact on product pricing. As efficiency has a substantial impact on the economics of solar cell production due to the high material cost content; in essence, improved efficiency through cost-effective texturing reduces the material cost component since the product is priced in terms of $/W. The project is a collaboration between Fraunhofer USA, Inc. and a c-Si PV manufacturer.

Hans J. Herfurth; Henrikki Pantsar

2013-01-10T23:59:59.000Z

493

Dynamic Line Rating Oncor Electric Delivery Smart Grid Program  

SciTech Connect (OSTI)

Electric transmission lines are the lifeline of the electric utility industry, delivering its product from source to consumer. This critical infrastructure is often constrained such that there is inadequate capacity on existing transmission lines to efficiently deliver the power to meet demand in certain areas or to transport energy from high-generation areas to high-consumption regions. When this happens, the cost of the energy rises; more costly sources of power are used to meet the demand or the system operates less reliably. These economic impacts are known as congestion, and they can amount to substantial dollars for any time frame of reference: hour, day or year. There are several solutions to the transmission constraint problem, including: construction of new generation, construction of new transmission facilities, rebuilding and reconductoring of existing transmission assets, and Dynamic Line Rating (DLR). All of these options except DLR are capital intensive, have long lead times and often experience strong public and regulatory opposition. The Smart Grid Demonstration Program (SGDP) project co-funded by the Department of Energy (DOE) and Oncor Electric Delivery Company developed and deployed the most extensive and advanced DLR installation to demonstrate that DLR technology is capable of resolving many transmission capacity constraint problems with a system that is reliable, safe and very cost competitive. The SGDP DLR deployment is the first application of DLR technology to feed transmission line real-time dynamic ratings directly into the system operation’s State Estimator and load dispatch program, which optimizes the matching of generation with load demand on a security, reliability and economic basis. The integrated Dynamic Line Rating (iDLR)1 collects transmission line parameters at remote locations on the lines, calculates the real-time line rating based on the equivalent conductor temperature, ambient temperature and influence of wind and solar radiation on the stringing section, transmits the data to the Transmission Energy Management System, validates its integrity and passes it on to Oncor and ERCOT (Electric Reliability Council of Texas) respective system operations. The iDLR system is automatic and transparent to ERCOT System Operations, i.e., it operates in parallel with all other system status telemetry collected through Supervisory Control and Data Acquisition (SCADA) employed across the company.

Johnson, Justin; Smith, Cale; Young, Mike; Donohoo, Ken; Owen, Ross; Clark, Eddit; Espejo, Raul; Aivaliotis, Sandy; Stelmak, Ron; Mohr, Ron; Barba, Cristian; Gonzalez, Guillermo; Malkin, Stuart; Dimitrova, Vessela; Ragsdale, Gary; Mitchem, Sean; Jeirath, Nakul; Loomis, Joe; Trevino, Gerardo; Syracuse, Steve; Hurst, Neil; Mereness, Matt; Johnson, Chad; Bivens, Carrie

2013-05-04T23:59:59.000Z

494

Traffic of cytoskeletal motors with disordered attachment rates  

E-Print Network [OSTI]

Motivated by experimental results on the interplay between molecular motors and tau proteins, we extend lattice-based models of intracellular transport to include a second species of particle which locally influences the motor-filament attachment rate. We consider various exactly solvable limits of a stochastic multi-particle model before focusing on the low-motor-density regime. Here, an approximate treatment based on the random walk behaviour of single motors gives good quantitative agreement with simulation results for the tau-dependence of the motor current. Finally, we discuss the possible physiological implications of our results.

H. Grzeschik; R. J. Harris; L. Santen

2008-06-24T23:59:59.000Z

495

High-repetition-rate CF/sub 4/ laser  

SciTech Connect (OSTI)

A 16 ..mu..m CF/sub 4/ laser oscillator has operated at 1 kHz in a cooled static cell. Threshold pump energies required from the low pressure, Q-switched, cw discharge CO/sub 2/ laser were as low as 60 ..mu..J. The laser cavity employed the multiple-pass off-axis path resonator in a ring configuration. CF/sub 4/ laser power at 615 cm/sup -1/ and a 1 kHz repetition rate exceeded 300 ..mu..W.

Telle, J.

1981-01-01T23:59:59.000Z

496

Environment-independent decoherence rate in classically chaotic systems  

E-Print Network [OSTI]

We study the decoherence of a one-particle system, whose classical correpondent is chaotic, when it evolves coupled to a weak quenched environment. This is done by analytical evaluation of the Loschmidt Echo, (i.e. the revival of a localized density excitation upon reversal of its time evolution), in presence of the perturbation. We predict an exponential decay for the Loschmidt Echo with a (decoherence) rate which is asymptotically given by the mean Lyapunov exponent of the classical system, and therefore independent of the perturbation strength, within a given range of strengths. Our results are consistent with recent experiments of Polarization Echoes in nuclear magnetic resonance and preliminary numerical simulations.

Rodolfo A. Jalabert; Horacio M. Pastawski

2001-03-29T23:59:59.000Z

497

Beat Frequency Modulation of T Tauri Accretion Rates  

E-Print Network [OSTI]

A general model of magnetically controlled accretion onto T Tauri stars is presented. In this model the magnetic field is oriented arbitrarily in relation to the star's rotation axis. The resultant interplay between the magnetic field and accretion disc causes a variable accretion rate. The dominant timescale of this variability is the beat frequency between the stellar rotation frequency and the orbital frequency at the magnetosphere boundary. This model is analogous to that developed to explain quasi-periodic oscillations in low-mass X-ray binaries.

K. W. Smith; I. A. Bonnell; G. F. Lewis

1995-04-10T23:59:59.000Z

498

Influence of loading rate on axially loaded piles in clay  

E-Print Network [OSTI]

. Coyle (Member) ave u ofs (Member) . Hsrsc (Head of Department) May 1984 ABSTRACT Influence of Loading Rate on Axially Loaded Piles in Clay. (May 1984) Enrique Eduardo Garland Ponce, B. S. , Texas A8M University Chairman of Committee: Dr. Jean... and support during all phases of this study. The author also wishes to acknowledge Drs. Harry M. Coyle and David Dubofski who served as members of the advisory committee. Special notes of gratitude to Dr . Wayne A. Dunlap for his aid in the design...

Garland Ponce, Enrique Eduardo

1984-01-01T23:59:59.000Z

499

Cloud-Scale Vertical Velocity and Turbulent Dissipation Rate Retrievals  

SciTech Connect (OSTI)

Time-height fields of retrieved in-cloud vertical wind velocity and turbulent dissipation rate, both retrieved primarily from vertically-pointing, Ka-band cloud radar measurements. Files are available for manually-selected, stratiform, mixed-phase cloud cases observed at the North Slope of Alaska (NSA) site during periods covering the Mixed-Phase Arctic Cloud Experiment (MPACE, late September through early November 2004) and the Indirect and Semi-Direct Aerosol Campaign (ISDAC, April-early May 2008). These time periods will be expanded in a future submission.

Shupe, Matthew

2013-05-22T23:59:59.000Z

500

Novel technique for constraining r-process (n,$?$) reaction rates  

E-Print Network [OSTI]

A novel technique has been developed, which will open exciting new opportunities for studying the very neutron-rich nuclei involved in the r-process. As a proof-of-principle, the $\\gamma$-spectra from the $\\beta$-decay of $^{76}$Ga have been measured with the SuN detector at the National Superconducting Cyclotron Laboratory. The nuclear level density and $\\gamma$-ray strength function are extracted and used as input to Hauser-Feshbach calculations. The present technique is shown to strongly constrain the $^{75}$Ge($n,\\gamma$)$^{76}$Ge cross section and reaction rate.

A. Spyrou; S. N. Liddick; A. C. Larsen; M. Guttormsen; K. Cooper; A. C. Dombos; D. J. Morrissey; F. Naqvi; G. Perdikakis; S. J. Quinn; T. Renstrøm; J. A. Rodriguez; A. Simon; C. S. Sumithrarachchi; R. G. T. Zegers

2014-08-27T23:59:59.000Z