Sample records for rate parameters adjusted

  1. 2004 Rate Adjustments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for Transmission and Ancillary Services Federal Register Notice -- Rate Order WAPA-141: Notice of Extension of Formula Rates for Transmission and Ancillary Services If you have any...

  2. Rate Adjustments and Public Involvement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CRSP Transmission 9162013 WAPA-161 FRN, CRSP transmission and ancillary services rates extension Letter announcing two-year extension to CRSP transmission and ancillary...

  3. Adjustable flow rate controller for polymer solutions

    DOE Patents [OSTI]

    Jackson, Kenneth M. (Bartlesville, OK)

    1981-01-01T23:59:59.000Z

    An adjustable device for controlling the flow rate of polymer solutions which results in only little shearing of the polymer molecules, said device comprising an inlet manifold, an outlet manifold, a plurality of tubes capable of providing communication between said inlet and outlet manifolds, said tubes each having an internal diameter that is smaller than that of the inlet manifold and large enough to insure that viscosity of the polymer solution passing through each said tube will not be reduced more than about 25 percent, and a valve associated with each tube, said valve being capable of opening or closing communication in that tube between the inlet and outlet manifolds, each said valve when fully open having a diameter that is substantially at least as great as that of the tube with which it is associated.

  4. Ihsan Yaniko No. 2013-022 ADJUSTABLE ROBUST PARAMETER ...

    E-Print Network [OSTI]

    BruijnC

    2013-03-21T23:59:59.000Z

    Mar 21, 2013 ... The goal of many experiments is to estimate the best solution for a ... Output may be univariate (a single or scalar response) or multivariate ... second type of inputs is not controlled by the users; e.g., demand in an inventory system. ...... practice, a part of the controllable factors can often be adjusted after ...

  5. Relativistic Nuclear Energy Density Functionals: adjusting parameters to binding energies

    E-Print Network [OSTI]

    T. Niksic; D. Vretenar; P. Ring

    2008-09-08T23:59:59.000Z

    We study a particular class of relativistic nuclear energy density functionals in which only nucleon degrees of freedom are explicitly used in the construction of effective interaction terms. Short-distance (high-momentum) correlations, as well as intermediate and long-range dynamics, are encoded in the medium (nucleon density) dependence of the strength functionals of an effective interaction Lagrangian. Guided by the density dependence of microscopic nucleon self-energies in nuclear matter, a phenomenological ansatz for the density-dependent coupling functionals is accurately determined in self-consistent mean-field calculations of binding energies of a large set of axially deformed nuclei. The relationship between the nuclear matter volume, surface and symmetry energies, and the corresponding predictions for nuclear masses is analyzed in detail. The resulting best-fit parametrization of the nuclear energy density functional is further tested in calculations of properties of spherical and deformed medium-heavy and heavy nuclei, including binding energies, charge radii, deformation parameters, neutron skin thickness, and excitation energies of giant multipole resonances.

  6. Use of parameter adjustment techniques in the simulation of multi-echelon inventory/distribution system

    E-Print Network [OSTI]

    Der Tatevasion, Thomas John

    1981-01-01T23:59:59.000Z

    USE OF PARAMETER ADJUSTI4IENT TECHNIQUES IN THE SIMULATION OF A 11ULTI-ECHELON INVENTORY/DISTRIBUTION SYSTEM A Thesis by THOMAS JOHN DER TATEVASION Submitted to the Graduate College of Texas ARM University in partial fulfillment... of the requirement for the degree of MASTER OF SCIENCE August 1981 Major Subject: Industrial Engineering USE OF PARAMETER ADJUSTMENT TECHNIQUES IN THE SIMULATION OF A MULTI-ECHELOI'I INVENTORY/DISTRIBUTION SYSTEM A Thes1s by THOMAS JOHN DER TATEVASION...

  7. The Adjustment of Avian Metabolic Rates and Water Fluxes to Desert Environments

    E-Print Network [OSTI]

    Williams, Jos. B.

    ambient air temperatures (Ta), low primary productivity, and lack of surface water place deserts among and Seely 1982; Williams and Tieleman 2000b). Likewise, lack of surface water ostensibly limits water intake461 The Adjustment of Avian Metabolic Rates and Water Fluxes to Desert Environments B. Irene

  8. Variable rate CELP speech coding using widely variable parameter updates

    E-Print Network [OSTI]

    Moodie, Myron L.

    1995-01-01T23:59:59.000Z

    bit rates for a given quality level. This work develops new techniques, referred to as widely variable CELP parameter updates, which dynamically adapt the transmit frequency of the CELP spectral parameters to the characteristics of the input speech...

  9. Property:OpenEI/UtilityRate/EnergyRateStructure/Tier4Adjustment | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkinsInformation DemandReactivePowerCharge JumpEnergy Information Tier4Adjustment

  10. 2007 Wholesale Power Rate Adjustment Proceeding (WP-07) : Administrator's Final Record of Decision.

    SciTech Connect (OSTI)

    United States. Bonneville Power Administration.

    2006-07-01T23:59:59.000Z

    This Record of Decision (ROD) contains the decisions of the Bonneville Power Administration (BPA), based on the record compiled in this rate proceeding, with respect to the adoption of power rates for the three-year rate period commencing October 1, 2006, through September 30, 2009. This ''2007 Wholesale Power Rate Adjustment Proceeding'' is designed to establish replacement rate schedules and General Rate Schedule Provisions (GRSPs) for those that expire on September 30, 2006. This power rate case also establishes the General Transfer Agreement (GTA) Delivery Charge for the period of October 1, 2007, through September 30, 2009. BPA's Power Subscription Strategy and Record of Decision (Subscription Strategy), as well as other Agency processes, provide much of the policy context for this rate case and are described in Section 2. This ROD follows a full evidentiary hearing and briefing, including an Oral Argument before the BPA Administrator. Sections 3 through 18, including any appendices or attachments, present the issues raised by parties in this proceeding, the parties positions, BPA staff positions on the issues, BPA's evaluations of the positions, and the Administrator's decisions. Parties had the opportunity to file briefs on exceptions to the Draft ROD, before issuance of this Final Record of Decision.

  11. Prediction of interest rate using CKLS model with stochastic parameters

    SciTech Connect (OSTI)

    Ying, Khor Chia [Faculty of Computing and Informatics, Multimedia University, Jalan Multimedia, 63100 Cyberjaya, Selangor (Malaysia); Hin, Pooi Ah [Sunway University Business School, No. 5, Jalan Universiti, Bandar Sunway, 47500 Subang Jaya, Selangor (Malaysia)

    2014-06-19T23:59:59.000Z

    The Chan, Karolyi, Longstaff and Sanders (CKLS) model is a popular one-factor model for describing the spot interest rates. In this paper, the four parameters in the CKLS model are regarded as stochastic. The parameter vector ?{sup (j)} of four parameters at the (J+n)-th time point is estimated by the j-th window which is defined as the set consisting of the observed interest rates at the j?-th time point where j?j??j+n. To model the variation of ?{sup (j)}, we assume that ?{sup (j)} depends on ?{sup (j?m)}, ?{sup (j?m+1)},…, ?{sup (j?1)} and the interest rate r{sub j+n} at the (j+n)-th time point via a four-dimensional conditional distribution which is derived from a [4(m+1)+1]-dimensional power-normal distribution. Treating the (j+n)-th time point as the present time point, we find a prediction interval for the future value r{sub j+n+1} of the interest rate at the next time point when the value r{sub j+n} of the interest rate is given. From the above four-dimensional conditional distribution, we also find a prediction interval for the future interest rate r{sub j+n+d} at the next d-th (d?2) time point. The prediction intervals based on the CKLS model with stochastic parameters are found to have better ability of covering the observed future interest rates when compared with those based on the model with fixed parameters.

  12. Essays in Applied Macroeconomics: Asymmetric Price Adjustment, Exchange Rate and Treatment Effect

    E-Print Network [OSTI]

    Gu, Jingping

    2009-05-15T23:59:59.000Z

    -varying volatility of gasoline price disturbances is an important feature of the data, and when we allow for asymmetric GARCH errors and investigate the system wide impulse response function, we find evidence of asymmetric adjustment to crude oil price changes...

  13. Adjusting the specificity of an engine map based on the sensitivity of an engine control parameter relative to a performance variable

    DOE Patents [OSTI]

    Jiang, Li; Lee, Donghoon; Yilmaz, Hakan; Stefanopoulou, Anna

    2014-10-28T23:59:59.000Z

    Methods and systems for engine control optimization are provided. A first and a second operating condition of a vehicle engine are detected. An initial value is identified for a first and a second engine control parameter corresponding to a combination of the detected operating conditions according to a first and a second engine map look-up table. The initial values for the engine control parameters are adjusted based on a detected engine performance variable to cause the engine performance variable to approach a target value. A first and a second sensitivity of the engine performance variable are determined in response to changes in the engine control parameters. The first engine map look-up table is adjusted when the first sensitivity is greater than a threshold, and the second engine map look-up table is adjusted when the second sensitivity is greater than a threshold.

  14. An economic analysis of alternative stocking rate adjustment strategies for short duration grazing systems in the Texas Rolling Plains

    E-Print Network [OSTI]

    Riechers, Robin Keith

    1986-01-01T23:59:59.000Z

    production parameters (weaning weight 20 and percent calves weaned) are altered based on the decisions made. Stocking or destocking of livestock above the normal culling practices is recorded. Price variation is included in the model through a random... of alternative stocking rate strategies for short duration grazing systems in the Eastern portion of the Texas Rolling plains is performed . The analysis is based on a model which emulates the annual decision-making process of a rancher. The model includes...

  15. Determination of crack morphology parameters from service failures for leak-rate analyses

    SciTech Connect (OSTI)

    Wilkowski, G.; Ghadiali, N.; Paul, D. [Battelle Memorial Institute, Columbus, OH (United States)] [and others

    1997-04-01T23:59:59.000Z

    In leak-rate analyses described in the literature, the crack morphology parameters are typically not well agreed upon by different investigators. This paper presents results on a review of crack morphology parameters determined from examination of service induced cracks. Service induced cracks were found to have a much more tortuous flow path than laboratory induced cracks due to crack branching associated with the service induced cracks. Several new parameters such as local and global surface roughnesses, as well as local and global number of turns were identified. The effect of each of these parameters are dependent on the crack-opening displacement. Additionally, the crack path is typically assumed to be straight through the pipe thickness, but the service data show that the flow path can be longer due to the crack following a fusion line, and/or the number of turns, where the number of turns in the past were included as a pressure drop term due to the turns, but not the longer flow path length. These parameters were statistically evaluated for fatigue cracks in air, corrosion-fatigue, IGSCC, and thermal fatigue cracks. A refined version of the SQUIRT leak-rate code was developed to account for these variables. Sample calculations are provided in this paper that show how the crack size can vary for a given leak rate and the statistical variation of the crack morphology parameters.

  16. Rates & Repayment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Environmental Review-NEPA Financial Data Operations Planning & Projects Power Marketing Rates Rate Adjustments Transmission Ancillary Services Rates WAPA-137 Rate Order Rates and...

  17. Method for preparing membranes with adjustable separation performance

    DOE Patents [OSTI]

    Peterson, E.S.; Orme, C.J.; Stone, M.L.

    1995-01-31T23:59:59.000Z

    Methods for adjustable separation of solutes and solvents involve the combination of the use of a maximally swollen membrane and subsequent vacuum depressurization exerted on the permeate side of that membrane. By adjusting the extent of depressurization it is possible to separate solvent from solutes and solutes from each other. Improved control of separation parameters as well as improved flux rates characterize the present invention. 2 figs.

  18. Automatic temperature adjustment apparatus

    DOE Patents [OSTI]

    Chaplin, James E. (66 Overlook Rd., Bloomingdale, NJ 07403)

    1985-01-01T23:59:59.000Z

    An apparatus for increasing the efficiency of a conventional central space heating system is disclosed. The temperature of a fluid heating medium is adjusted based on a measurement of the external temperature, and a system parameter. The system parameter is periodically modified based on a closed loop process that monitors the operation of the heating system. This closed loop process provides a heating medium temperature value that is very near the optimum for energy efficiency.

  19. Power Rate Adjustments (pbl/rates)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible forPortsmouth/Paducah Project OfficePower Electronics Power Electronics PowerPower

  20. Observation of pressure gradient and related flow rate effect on the plasma parameters in plasma processing reactor

    SciTech Connect (OSTI)

    Lee, Hyo-Chang; Kim, Aram; Chung, Chin-Wook [Department of Electrical Engineering, Hanyang University, 17 Haengdang-dong, Seongdong-gu, Seoul 133-791 (Korea, Republic of); Moon, Se Youn [Solar Energy Group, LG Electronics Advanced Research Institute, 16 Woomyeon-Dong, Seocho-Gu, Seoul 137-724 (Korea, Republic of)

    2011-02-15T23:59:59.000Z

    In industrial plasma processes, flow rate has been known to a key to control plasma processing results and has been discussed with reactive radical density, gas residence time, and surface reaction. In this study, it was observed that the increase in the flow rate can also change plasma parameters (electron temperature and plasma density) and electron energy distribution function in plasma processing reactor. Based on the measurement of gas pressure between the discharge region and the pumping port region, the considerable differences in the gas pressure between the two regions were found with increasing flow rate. It was also observed that even in the discharge region, the pressure gradient occurs at the high gas flow rate. This result shows that increasing the flow rate results in the pressure gradient and causes the changes in the plasma parameters.

  1. RATES

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Planning & Projects Power Marketing Rates You are here: SN Home page > Power Marketing > RATES Rates and Repayment Services Rates Current Rates FY 15 PRR worksheet (PDF - 31K) FY...

  2. RATES

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    RATES Rates Document Library SNR Rates Process Calendar (PDF - 171K) Procedures Informal Process Transmission Action Items List (PDF - 144K) Power Action Item List updated on...

  3. Budget Adjustment Single Sided Budget Adjustment

    E-Print Network [OSTI]

    Stephens, Graeme L.

    Budget Adjustment & Single Sided Budget Adjustment WELCOME! #12;Accessing Kuali · Campus://busfin.colostate.edu #12;What will be covered today? · When should I use a Budget Adjustment (BA) or Single Sided Budget · Error correction · Onesided vs. singlesided entries #12;When to use a Budget Adjustment · How do I know

  4. RATES

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Marketing > RATES RATES Current Rates Past Rates 2006 2007 2008 2009 2010 2011 2012 Rates Schedules Power CV-F13 CPP-2 Transmissions CV-T3 CV-NWT5 PACI-T3 COTP-T3 CV-TPT7 CV-UUP1...

  5. Spatial Distributions and Stochastic Parameter Influences on SWAT Flow and Sediment Predictions

    E-Print Network [OSTI]

    Chaubey, Indrajeet

    evaporation compensation factor ESCO , groundwater revap coefficient GW_REVAP , and peak rate adjust- ment factor for sediment routing in the subbasin AMP as uncertain parameters, indicated that generally ESCO

  6. Effects of uncertainty in SAPRC90 rate constants and selected product yields on reactivity adjustment factors for alternative fuel vehicle emissions. Final report

    SciTech Connect (OSTI)

    Bergin, M.S.; Russell, A.G.; Yang, Y.J.; Milford, J.B.; Kirchner, F.; Stockwell, W.R.

    1996-07-01T23:59:59.000Z

    Tropospheric ozone is formed in the atmosphere by a series of reactions involving volatile organic compounds (VOCs) and nitrogen oxides (NO{sub x}). While NOx emissions are primarily composed of only two compounds, nitrogen oxide (NO) and nitrogen dioxide (NO{sub 2}), there are hundreds of different VOCs being emitted. In general, VOCs promote ozone formation, however, the rate and extent of ozone produced by the individual VOCs varies considerably. For example, it is widely acknowledged that formaldehyde (HCHO) is a very reactive VOC, and produces ozone rapidly and efficiently under most conditions. On the other hand, VOCs such as methane, ethane, propane, and methanol do not react as quickly, and are likely to form less urban ozone than a comparable mass of HCHO. The difference in ozone forming potential is one of the bases for the use of alternative fuels. The fuels considered in this study included compressed natural gas, LPG, mixtures of methanol and gasoline, ethanol and gasoline, and a reformulated gasoline.

  7. WAPA-169 Rate Order

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    69 Rate Order Western is proposing adjustments to the Salt Lake City Area Integrated Projects firm power rate and the Colorado River Storage Project Transmission and ancillary...

  8. Safety Net (SN) CRAC (rates/adjustments)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection245C Unlimited ReleaseWelcome ton nSafeguardsUpdates > Safety4

  9. Dividend Distribution Clause (DDC) (rates/adjustments)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField Campaign:INEA : Papers SubfoldersU.S.PVDividend Distribution Clause

  10. Governance of Adjustments

    E-Print Network [OSTI]

    Wernerfelt, Birger

    2003-03-14T23:59:59.000Z

    The article proposes a research program to compare game forms in terms of their ability to govern ex post adjustments to ex ante contracts. The comparisons can be ...

  11. Quantification of Kinetic Rate Law Parameters of Uranium Release from Sodium Autunite as a Function of Aqueous Bicarbonate Concentrations

    SciTech Connect (OSTI)

    Gudavalli, Ravi; Katsenovich, Yelena; Wellman, Dawn M.; Lagos, Leonel; Tansel, Berrin

    2013-09-05T23:59:59.000Z

    ABSTRACT: Hydrogen carbonate is one of the most significant components within the uranium geochemical cycle. In aqueous solutions, hydrogen carbonate forms strong complexes with uranium. As such, aqueous bicarbonate may significantly increase the rate of uranium release from uranium minerals. Quantifying the relationship of aqueous hydrogen carbonate solutions to the rate of uranium release during dissolution is critical to understanding the long-term fate of uranium within the environment. Single-pass flow-through (SPTF) experiments were conducted to estimate the rate of uranium release from Na meta-autunite as a function of bicarbonate solutions (0.0005-0.003 M) under the pH range of 6-11 and temperatures of 5-60oC. Consistent with the results of previous investigation, the rate of uranium release from sodium autunite exhibited minimal dependency on temperature; but were strongly dependent on pH and increasing concentrations of bicarbonate solutions. Most notably at pH 7, the rate of uranium release exhibited 370 fold increases relative to the rate of uranium release in the absence of bicarbonate. However, the effect of increasing concentrations of bicarbonate solutions on the release of uranium was significantly less under higher pH conditions. It is postulated that at high pH values, surface sites are saturated with carbonate, thus the addition of more bicarbonate would have less effect on uranium release. Results indicate the activation energies were unaffected by temperature and bicarbonate concentration variations, but were strongly dependent on pH conditions. As pH increased from 6 to 11, activation energy values were observed to decrease from 29.94 kJ mol-1 to 13.07 kJ mol-1. The calculated activation energies suggest a surface controlled dissolution mechanism.

  12. UAI-96R Rate Adjustment (rates/ratecases)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron Spin TransitionProgram | Department HomeDialoguet e d N a t i o n s I

  13. FPS-96R Rate Adjustment (rates/ratecases)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist. Category UC-lFederal ColumbiaASCR2FOR THEFNAL8

  14. 2007-2009 Power Rate Adjustments (pbl/rates)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del(ANL-IN-03-032) -Less isNFebruary 2004 Tue,March 2007(SC) 7 Long CRAC NFB

  15. Purchased Gas Adjustment Rules (Tennessee)

    Broader source: Energy.gov [DOE]

    The Purchased Gas Adjustment Rules are implemented by the Tennessee Regulatory Authority (Authority). Purchased Gas Adjustment (PGA) Rules are intended to permit the company/LDC (local gas...

  16. Measurement of $J/\\psi\\to\\gamma\\eta_{\\rm c}$ decay rate and $\\eta_{\\rm c}$ parameters at KEDR

    E-Print Network [OSTI]

    Anashin, V V; Baldin, E M; Barladyan, A K; Barnyakov, A Yu; Barnyakov, M Yu; Baru, S E; Basok, I Yu; Bedny, I V; Blinov, A E; Blinov, V E; Bobrov, A V; Bobrovnikov, V S; Bogomyagkov, A V; Bondar, A E; Buzykaev, A R; Eidelman, S I; Glukhovchenko, Yu M; Gulevich, V V; Gusev, D V; Karnaev, S E; Karpov, G V; Karpov, S V; Kharlamova, T A; Kiselev, V A; Kononov, S A; Kotov, K Yu; Kravchenko, E A; Kulikov, V F; Kurkin, G Ya; Kuper, E A; Levichev, E B; Maksimov, D A; Malyshev, V M; Maslennikov, A L; Medvedko, A S; Meshkov, O I; Mishnev, S I; Morozov, I I; Muchnoi, N Yu; Neufeld, V V; Nikitin, S A; Nikolaev, I B; Okunev, I N; Onuchin, A P; Oreshkin, S B; Orlov, I O; Osipov, A A; Peleganchuk, S V; Pivovarov, S G; Piminov, P A; Petrov, V V; Poluektov, A O; Pospelov, G E; Prisekin, V G; Rezanova, O L; Ruban, A A; Sandyrev, V K; Savinov, G A; Shamov, A G; Shatilov, D N; Shwartz, B A; Simonov, E A; Sinyatkin, S V; Skrinsky, A N; Smaluk, V V; Sokolov, A V; Sukharev, A M; Starostina, E V; Talyshev, A A; Tayursky, V A; Telnov, V I; Tikhonov, Yu A; Todyshev, K Yu; Tumaikin, G M; Usov, Yu V; Vorobiov, A I; Yushkov, A N; Zhilich, V N; Zhulanov, V V; Zhuravlev, A N

    2014-01-01T23:59:59.000Z

    Using the inclusive photon spectrum based on a data sample collected at the $J/\\psi$ peak with the KEDR detector at the VEPP-4M $e^+e^-$ collider, we measured the rate of the radiative decay $J/\\psi\\to\\gamma\\eta_{\\rm c}$ as well as $\\eta_{\\rm c}$ mass and width. Taking into account an asymmetric photon lineshape we obtained: $\\Gamma^0_{\\gamma\\eta_{\\rm c}}=2.98\\pm0.18 \\phantom{|}^{+0.15}_{-0.33}$ keV, $M_{\\eta_{\\rm c}} = 2983.5 \\pm 1.4 \\phantom{|}^{+1.6}_{-3.6}$ MeV/$c^2$, $\\Gamma_{\\eta_{\\rm c}} = 27.2 \\pm 3.1 \\phantom{|}^{+5.4}_{-2.6}$ MeV.

  17. Precision adjustable stage

    DOE Patents [OSTI]

    Cutburth, Ronald W. (Tracy, CA); Silva, Leonard L. (Livermore, CA)

    1988-01-01T23:59:59.000Z

    An improved mounting stage of the type used for the detection of laser beams is disclosed. A stage center block is mounted on each of two opposite sides by a pair of spaced ball bearing tracks which provide stability as well as simplicity. The use of the spaced ball bearing pairs in conjunction with an adjustment screw which also provides support eliminates extraneous stabilization components and permits maximization of the area of the center block laser transmission hole.

  18. Comparison of parameter sensitivities between a laboratory and field scale model of uranium transport in a dual domain, distributed-rate reactive system

    SciTech Connect (OSTI)

    Greskowiak, Janek; Prommer, Henning; Liu, Chongxuan; Post, Vincent; Ma, Rui; Zheng, Chunmiao; Zachara, John M.

    2010-09-16T23:59:59.000Z

    A laboratory-derived conceptual and numerical model for U(VI) transport at the Hanford 300A site, Washington, USA, was applied to a range of field-scale scenarios of different complexity to systematically evaluate model parameter sensitivities. The model, originally developed from column experiment data, included distributed-rate surface complexation kinetics of U(VI), aqueous speciation, and physical non-equilibrium transport processes. A rigorous parameter sensitivity analysis was carried out with respect to different state variables: concentrations, mass fluxes, total mass and spatial moments of dissolved U(VI) for laboratory systems, and various simulation scenarios that represented the field-scale characteristics at the Hanford 300A site. The field-scenarios accounted for transient groundwater flow and variable geochemical conditions driven by frequent water level changes of the nearby Columbia River. Simulations indicated that the transient conditions significantly affected U(VI) plume migration at the site. The parameter sensitivities were largely similar between the laboratory and field scale systems. Where differences existed, they were shown to result from differing degrees of U(VI) adsorption disequilibrium caused by hydraulic or hydrogeochemical conditions. Adorption disequilibrium was found to differ (i) between short duration peak flow events at the field scale and much longer flow events in the laboratory, (ii) for changing groundwater chemical compositions due to river water intrusion, and (iii) for different sampling locations at the field scale. Parameter sensitivities were also found to vary with respect to the different investigated state variables. An approach is demonstrated that elucidates the most important parameters of a laboratory-scale model that must constrained in both the laboratory and field for meaningful field application.

  19. Sonde Adjust Value-Added Product Technical Report

    SciTech Connect (OSTI)

    Troyan, D

    2012-01-09T23:59:59.000Z

    The Sonde Adjust (SONDEADJUST) value-added product (VAP) creates a file that includes all fields from original Atmospheric Radiation Measurement Climate Research Facility (ARM Facility) radiosonde files and contains several value-added fields that provide adjustments related to well-known humidity issues. SONDEADJUST produces data that correct documented biases in radiosonde humidity measurements. Previous efforts towards applying some of these corrections are available via the discontinued PI product sgpsondecorr1miloC1. Unique fields contained within this datastream include smoothed original relative humidity, dry bias corrected relative humidity, and final corrected relative humidity. The smoothed RH field refines the relative humidity from integers-the resolution of the instrument-to fractions of a percent. This profile is then used to calculate the dry bias corrected field. The final correction fixes the time-lag problem and uses the dry-bias field as input into the algorithm. In addition to dry bias, solar heating is another correction that is encompassed in the final corrected RH field. Output from SONDEADJUST differs from the previous RH-corrected datastreams in important ways. First, all three types of ARM radiosondes-Vaisala RS-80, RS-90, and RS-92-are corrected using dedicated procedures and/or parameters. Second, the output variables include all of those found in the original radiosonde file: dry bulb temperature, dewpoint temperature, wind speed, wind direction, eastward wind component, northward wind component, wind status (a Vaisala-produced field used in conjunction with the Loran system), ascent rate, and original relative humidity. Additional humidity fields are smoothed relative humidity, dry biased corrected relative humidity, final ambient relative humidity, and scaled adjusted relative humidity. Third, quality control (QC) flags of the fields from the original radiosonde datastream are brought into the SONDEADJUST output file. Additional QC variables are created for the new fields.

  20. Efficient Adjustable Reflectivity Smart Window

    SciTech Connect (OSTI)

    D. Morgan Tench

    2005-12-01T23:59:59.000Z

    This project addressed the key technical issues for development of an efficient smart window based on reversible electrochemical transfer of silver between a mirror electrode and a localized counter electrode. Effort to provide uniform switching over large areas focused on use of a resistive transparent electrode innerlayer to increase the interelectrode resistance. An effective edge seal was developed in collaboration with adhesive suppliers and an electrochromic device manufacturer. Work to provide a manufacturable counter electrode focused on fabricating a dot matrix electrode without photolithography by electrodeposition of Pt nuclei on inherent active sites on a transparent oxide conductor. An alternative counter electrode based on a conducting polymer and an ionic liquid electrolyte was also investigated. Work in all of these areas was successful. Sputtered large-bandgap oxide innerlayers sandwiched between conductive indium tin oxide (ITO) layers were shown to provide sufficient cross-layer resistance (>300 ohm/cm{sup 2}) without significantly affecting the electrochemical properties of the ITO overlayer. Two edge seal epoxies, one procured from an epoxy manufacturer and one provided by an electrochromic device manufacturer in finished seals, were shown to be effective barriers against oxygen intrusion up to 80 C. The optimum density of nuclei for the dot matrix counter electrode was attained without use of photolithography by electrodeposition from a commercial alkaline platinum plating bath. Silver loss issues for cells with dot matrix electrodes were successfully addressed by purifying the electrolyte and adjusting the cell cycling parameters. More than 30K cycles were demonstrated for a REM cell (30-cm square) with a dot matrix counter electrode. Larger cells (30-cm square) were successfully fabricated but could not be cycled since the nucleation layers (provided by an outside supplier) were defective so that mirror deposits could not be produced.

  1. Adjusted Estimates of Texas Natural Gas Production

    U.S. Energy Information Administration (EIA) Indexed Site

    1 Energy Information Administration Adjusted Estimates of Texas Natural Gas Production Background The Energy Information Administration (EIA) is adjusting its estimates of natural...

  2. Determination of the relationship between permeation rates and solubility parameter differences for selected protective glove/solvent and boot/solvent combinations

    E-Print Network [OSTI]

    Janicik, Thomas Joseph

    1983-01-01T23:59:59.000Z

    differences for each test material/chemical combination were calcula- ted from published values. Permeation rates were experimentally determined for two different test materials versus nine test chemicals. Permeation rates for a particular test material/chemical.... Rod S1mmons for providing assistance in obtaining the equipment and test chemicals. Finally, I would like to acknowledge the financ1al assistance provided by NIOSH for my graduate education. TABLE OF CONTENTS ABSTRACT ACKNOWUEDGEMENTS LIST...

  3. Sensitivity of health risk estimates to air quality adjustment procedure

    SciTech Connect (OSTI)

    Whitfield, R.G.

    1997-06-30T23:59:59.000Z

    This letter is a summary of risk results associated with exposure estimates using two-parameter Weibull and quadratic air quality adjustment procedures (AQAPs). New exposure estimates were developed for children and child-occurrences, six urban areas, and five alternative air quality scenarios. In all cases, the Weibull and quadratic results are compared to previous results, which are based on a proportional AQAP.

  4. Self-adjusting magnetic bearing systems

    DOE Patents [OSTI]

    Post, R.F.

    1998-07-21T23:59:59.000Z

    A self-adjusting magnetic bearing automatically adjusts the parameters of an axially unstable magnetic bearing such that its force balance is maintained near the point of metastable equilibrium. Complete stabilization can be obtained with the application of weak restoring forces either from a mechanical bearing (running at near-zero load, thus with reduced wear) or from the action of residual eddy currents in a snubber bearing. In one embodiment, a torque is generated by the approach of a slotted pole to a conducting plate. The torque actuates an assembly which varies the position of a magnetic shunt to change the force exerted by the bearing. Another embodiment achieves axial stabilization by sensing vertical displacements in a suspended bearing element, and using this information in an electrical servo system. In a third embodiment, as a rotating eddy current exciter approaches a stationary bearing, it heats a thermostat which actuates an assembly to weaken the attractive force between the two bearing elements. An improved version of an electromechanical battery utilizing the designs of the various embodiments is described. 7 figs.

  5. Self-adjusting magnetic bearing systems

    DOE Patents [OSTI]

    Post, Richard F. (Walnut Creek, CA)

    1998-01-01T23:59:59.000Z

    A self-adjusting magnetic bearing automatically adjusts the parameters of an axially unstable magnetic bearing such that its force balance is maintained near the point of metastable equilibrium. Complete stabilization can be obtained with the application of weak restoring forces either from a mechanical bearing (running at near-zero load, thus with reduced wear) or from the action of residual eddy currents in a snubber bearing. In one embodiment, a torque is generated by the approach of a slotted pole to a conducting plate. The torque actuates an assembly which varies the position of a magnetic shunt to change the force exerted by the bearing. Another embodiment achieves axial stabilization by sensing vertical displacements in a suspended bearing element, and using this information in an electrical servo system. In a third embodiment, as a rotating eddy current exciter approaches a stationary bearing, it heats a thermostat which actuates an assembly to weaken the attractive force between the two bearing elements. An improved version of an electromechanical battery utilizing the designs of the various embodiments is described.

  6. Global Current Account Imbalances and Exchange Rate Adjustments

    E-Print Network [OSTI]

    Sadoulet, Elisabeth

    75 percent of the combined current account surpluses of Germany, Japan, China and all the world trajectory, rising energy prices, and the fact that the United States has become increasingly dependent on Asian central banks and politically unstable oil producers for financing its deficits. Add

  7. 2012 Wholesale Power and Transmission Rate Adjustment Proceeding

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Industry DSO Dispatcher Standing Order EIA Energy Information Administration EIS Environmental Impact Statement EN Energy Northwest, Inc. EPP Environmentally Preferred...

  8. Load-Based (LB) CRAC (rates/adjustments)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn12electron 9 5Let usNuclear SecurityTechnologyLoad-Based (LB)

  9. Financial-Based (FB) CRAC (rates/adjustments)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist.New Mexico

  10. 2012 Wholesale Power and Transmission Rate Adjustment Proceeding

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del(ANL-IN-03-032) -Less isNFebruary 2004August 2011CHPRC ReportKristenWorkshops

  11. Adjustable shear stress erosion and transport flume

    DOE Patents [OSTI]

    Roberts, Jesse D. (Carlsbad, NM); Jepsen, Richard A. (Carlsbad, NM)

    2002-01-01T23:59:59.000Z

    A method and apparatus for measuring the total erosion rate and downstream transport of suspended and bedload sediments using an adjustable shear stress erosion and transport (ASSET) flume with a variable-depth sediment core sample. Water is forced past a variable-depth sediment core sample in a closed channel, eroding sediments, and introducing suspended and bedload sediments into the flow stream. The core sample is continuously pushed into the flow stream, while keeping the surface level with the bottom of the channel. Eroded bedload sediments are transported downstream and then gravitationally separated from the flow stream into one or more quiescent traps. The captured bedload sediments (particles and aggregates) are weighed and compared to the total mass of sediment eroded, and also to the concentration of sediments suspended in the flow stream.

  12. Robust Risk Adjustment in Health Insurance

    E-Print Network [OSTI]

    2014-08-07T23:59:59.000Z

    Aug 7, 2014 ... Moody's estimates the preliminary median operating margins for ..... [1] Staff, ORYX risk adjustment guide, Tech. rep., Joint Commission (2014).

  13. Property:OpenEI/UtilityRate/DemandRateStructure/Tier1Adjustment | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County,NumberOfNonCorporateOrganizations JumpInformationEnergy Information

  14. Property:OpenEI/UtilityRate/DemandRateStructure/Tier2Adjustment | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County,NumberOfNonCorporateOrganizations

  15. Property:OpenEI/UtilityRate/DemandRateStructure/Tier3Adjustment | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County,NumberOfNonCorporateOrganizationsInformation Tier2Max Jump to:Energy

  16. Property:OpenEI/UtilityRate/DemandRateStructure/Tier4Adjustment | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County,NumberOfNonCorporateOrganizationsInformation Tier2Max

  17. Property:OpenEI/UtilityRate/DemandRateStructure/Tier5Adjustment | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County,NumberOfNonCorporateOrganizationsInformation Tier2MaxInformationEnergy

  18. Property:OpenEI/UtilityRate/DemandRateStructure/Tier6Adjustment | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County,NumberOfNonCorporateOrganizationsInformationInformationEnergy

  19. Property:OpenEI/UtilityRate/EnergyRateStructure/Tier1Adjustment | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkinsInformation DemandReactivePowerCharge Jump to: navigation, searchEnergy

  20. Property:OpenEI/UtilityRate/EnergyRateStructure/Tier2Adjustment | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkinsInformation DemandReactivePowerCharge Jump to:Energy Information

  1. Property:OpenEI/UtilityRate/EnergyRateStructure/Tier3Adjustment | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkinsInformation DemandReactivePowerCharge Jump to:EnergyInformation PagesEnergy

  2. Property:OpenEI/UtilityRate/EnergyRateStructure/Tier5Adjustment | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkinsInformation DemandReactivePowerCharge JumpEnergyEnergy Information

  3. Property:OpenEI/UtilityRate/EnergyRateStructure/Tier6Adjustment | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkinsInformation DemandReactivePowerCharge JumpEnergyEnergyInformationEnergy

  4. Surface Tension Adjustment in a Pseudo-Potential Lattice Boltzmann Model

    E-Print Network [OSTI]

    Hu, Anjie; Uddin, Rizwan

    2014-01-01T23:59:59.000Z

    Pseudo-potential lattice Boltzmann models have been widely applied in many multiphase simulations. However, most of these models still suffer from some drawbacks such as spurious velocities and untunable surface tension. In this paper, we aim to discuss the surface tension of a popular pseudo-potential model proposed by Kupershtokh et al., which has attracted much attention due to its simplicity and stability. The influence of a parameter on the surface tension in the model is analyzed. Based on the analysis, we proposed a method to adjust surface tension by changing the parameter in the model. However, the density distribution and the stability of the model also depend on the parameter. To adjust the surface tension independently, the pressure tensor modifying method is introduced and numerically tested. The simulation results show that, by applying the pressure tensor modifying method, the surface tension can be adjusted with little influence on the stability and density distributions.

  5. Magnetic bearing element with adjustable stiffness

    DOE Patents [OSTI]

    Post, Richard F

    2013-11-12T23:59:59.000Z

    A compact magnetic bearing element is provided which is made of permanent magnet discs configured to be capable of the adjustment of the bearing stiffness and levitation force over a wide range.

  6. Risk-adjusted monitoring of survival times

    SciTech Connect (OSTI)

    Sego, Landon H.; Reynolds, Marion R.; Woodall, William H.

    2009-02-26T23:59:59.000Z

    We consider the monitoring of clinical outcomes, where each patient has a di®erent risk of death prior to undergoing a health care procedure.We propose a risk-adjusted survival time CUSUM chart (RAST CUSUM) for monitoring clinical outcomes where the primary endpoint is a continuous, time-to-event variable that may be right censored. Risk adjustment is accomplished using accelerated failure time regression models. We compare the average run length performance of the RAST CUSUM chart to the risk-adjusted Bernoulli CUSUM chart, using data from cardiac surgeries to motivate the details of the comparison. The comparisons show that the RAST CUSUM chart is more efficient at detecting a sudden decrease in the odds of death than the risk-adjusted Bernoulli CUSUM chart, especially when the fraction of censored observations is not too high. We also discuss the implementation of a prospective monitoring scheme using the RAST CUSUM chart.

  7. Cost of Gas Adjustment for Gas Utilities (Maine)

    Broader source: Energy.gov [DOE]

    This rule, applicable to gas utilities, establishes rules for calculation of gas cost adjustments, procedures to be followed in establishing gas cost adjustments and refunds, and describes reports...

  8. A Gain-adjusted Fuzzy PI/PD Adaptive Controller based on the Accumulated Genetic Algorithm

    E-Print Network [OSTI]

    Chou, Chien-Hsing (Ister)

    for each cycle and future regulates the parameter of controller by two factors or functions. In addition, the controller signal is fed back to the adaptive mechanism [15] and [16]. Then, the regulated functions on a fuzzy reasoning is designed to adjust the output range of a controller in [17]. The ideal structure

  9. Parameters and error of a theoretical model

    SciTech Connect (OSTI)

    Moeller, P.; Nix, J.R.; Swiatecki, W.

    1986-09-01T23:59:59.000Z

    We propose a definition for the error of a theoretical model of the type whose parameters are determined from adjustment to experimental data. By applying a standard statistical method, the maximum-likelihoodlmethod, we derive expressions for both the parameters of the theoretical model and its error. We investigate the derived equations by solving them for simulated experimental and theoretical quantities generated by use of random number generators. 2 refs., 4 tabs.

  10. Adjustable speed drives: Applications and R&D needs

    SciTech Connect (OSTI)

    Stefanovic, V.R.

    1995-09-01T23:59:59.000Z

    The largest opportunity for the growth of adjustable speed drives (ASDs) during the next 5-6 years is in pump, fan and compressor (PFC) applications where a constant, fixed speed operation is converted to adjustable speed in order to realize energy savings. Inverter supplied induction motors are and will continue to be predominately used in these applications. Over the long term (10-15 years), the greatest ASD growth is expected in large volume consumer applications: first in hybrid electric vehicles (EVs) and in residential heating, ventilation and air-conditioning (HVAC). Both induction and a variety of AC Permanent Magnet motors are expected to be the dominant technology in this new field. The traditional ASD applications in industries which require adjustable speed (such as machine tools, robotics, steel rolling, extruders, paper mill finishing lines, etc.) offer a relatively limited potential for above average ASD growth since most of these applications have already converted to electronic speed control. As a result, ASD growth in this sector will essentially track the growth of the corresponding industries. If realized, both short and long term ASD growth opportunities will result in significant advancements of ASD technology, which will then substantially affect all other, more fragmented, ASD applications. In fact, any single large volume ASD application will serve as a catalyst for improving ASD characteristics in all other ASD applications with the same voltage rating. ASD cost and reliability (defined in the context of application compatibility) are the two most important factors which will determine whether the ASD growth opportunities are realized. Conversely, any technological improvement which carries a cost increase will be restricted to niche applications, at best. Consequently, future R & D efforts should be directed to secure reduction in ASD cost and improvement in ASD reliability. A specific action plan is outlined in this report.

  11. Article mounting and position adjustment stage

    DOE Patents [OSTI]

    Cutburth, Ronald W. (Tracy, CA); Silva, Leonard L. (Livermore, CA)

    1988-01-01T23:59:59.000Z

    An improved adjustment and mounting stage of the type used for the detection of laser beams is disclosed. A ring sensor holder has locating pins on a first side thereof which are positioned within a linear keyway in a surrounding housing for permitting reciprocal movement of the ring along the keyway. A rotatable ring gear is positioned within the housing on the other side of the ring from the linear keyway and includes an oval keyway which drives the ring along the linear keyway upon rotation of the gear. Motor-driven single-stage and dual (x, y) stage adjustment systems are disclosed which are of compact construction and include a large laser transmission hole.

  12. Article mounting and position adjustment stage

    DOE Patents [OSTI]

    Cutburth, R.W.; Silva, L.L.

    1988-05-10T23:59:59.000Z

    An improved adjustment and mounting stage of the type used for the detection of laser beams is disclosed. A ring sensor holder has locating pins on a first side thereof which are positioned within a linear keyway in a surrounding housing for permitting reciprocal movement of the ring along the keyway. A rotatable ring gear is positioned within the housing on the other side of the ring from the linear keyway and includes an oval keyway which drives the ring along the linear keyway upon rotation of the gear. Motor-driven single-stage and dual (x, y) stage adjustment systems are disclosed which are of compact construction and include a large laser transmission hole. 6 figs.

  13. Using Electronic Adjustable Speed Drives for Efficiency Improvement and Cost Reduction

    E-Print Network [OSTI]

    Friedman, N. R.

    U.S. industry and utilities have been using ac adjustable speed drives (ASDs) for more than 50 years. ASDs utilize power electronics technology to control the flow of power to an ac motor, thereby controlling the motor’s speed and rate of energy...

  14. Remote control for anode-cathode adjustment

    DOE Patents [OSTI]

    Roose, Lars D. (Albuquerque, NM)

    1991-01-01T23:59:59.000Z

    An apparatus for remotely adjusting the anode-cathode gap in a pulse power machine has an electric motor located within a hollow cathode inside the vacuum chamber of the pulse power machine. Input information for controlling the motor for adjusting the anode-cathode gap is fed into the apparatus using optical waveguides. The motor, controlled by the input information, drives a worm gear that moves a cathode tip. When the motor drives in one rotational direction, the cathode is moved toward the anode and the size of the anode-cathode gap is diminished. When the motor drives in the other direction, the cathode is moved away from the anode and the size of the anode-cathode gap is increased. The motor is powered by batteries housed in the hollow cathode. The batteries may be rechargeable, and they may be recharged by a photovoltaic cell in combination with an optical waveguide that receives recharging energy from outside the hollow cathode. Alternatively, the anode-cathode gap can be remotely adjusted by a manually-turned handle connected to mechanical linkage which is connected to a jack assembly. The jack assembly converts rotational motion of the handle and mechanical linkage to linear motion of the cathode moving toward or away from the anode.

  15. Rate Schedules

    Broader source: Energy.gov [DOE]

    One of the major responsibilities of Southeastern is to design, formulate, and justify rate schedules. Repayment studies prepared by the agency determine revenue requirements and appropriate rate...

  16. Wage adjustment, competitiveness and unemployment East Germany after unification

    E-Print Network [OSTI]

    Pfeifer, Holger

    Wage adjustment, competitiveness and unemployment ­ East Germany after unification Werner Smolny years after unification large differences of the labor market situation in East and West Germany persist adjustment in East Germany and the resulting development of competitiveness and unemployment differentials

  17. Adjustable expandable cryogenic piston and ring

    DOE Patents [OSTI]

    Mazur, Peter O. (Aurora, IL); Pallaver, Carl B. (Woodridge, IL)

    1980-01-01T23:59:59.000Z

    The operation of a reciprocating expansion engine for cryogenic refrigeration is improved by changing the pistons and rings so that the piston can be operated from outside the engine to vary the groove in which the piston ring is located. This causes the ring, which is of a flexible material, to be squeezed so that its contact with the wall is subject to external control. This control may be made manually or it may be made automatically in response to instruments that sense the amount of blow-by of the cryogenic fluid and adjust for an optimum blow-by.

  18. Elliptically polarizing adjustable phase insertion device

    DOE Patents [OSTI]

    Carr, Roger (Redwood City, CA)

    1995-01-01T23:59:59.000Z

    An insertion device for extracting polarized electromagnetic energy from a beam of particles is disclosed. The insertion device includes four linear arrays of magnets which are aligned with the particle beam. The magnetic field strength to which the particles are subjected is adjusted by altering the relative alignment of the arrays in a direction parallel to that of the particle beam. Both the energy and polarization of the extracted energy may be varied by moving the relevant arrays parallel to the beam direction. The present invention requires a substantially simpler and more economical superstructure than insertion devices in which the magnetic field strength is altered by changing the gap between arrays of magnets.

  19. adjusted clinical groups: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    status, psychiatric symptomatology, various family variables, psychosocial adjustment and knowledge of illness, medication, stress management and problem-solving skills......

  20. adjusted clinical group: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    status, psychiatric symptomatology, various family variables, psychosocial adjustment and knowledge of illness, medication, stress management and problem-solving skills......

  1. Adjusting the IP $\\beta$ Functions in RHIC

    E-Print Network [OSTI]

    Wittmer, W; Pilat, F; Ptitsyn, V; Van Zeijts, J

    2004-01-01T23:59:59.000Z

    The beta functions at the IP can be adjusted without perturbation of other optics functions via several approaches. In this paper we describe a scheme based on a vector knob, which assigns fixed values to the different tuning quadrupoles and scales them by a common multiplier. The values for the knob vector were calculated for a lattice without any errors using MADX. Previous studies for the LHC [1] have shown that this approach can meet the design goals. A specific feature of the RHIC lattice is the nested power supply system. To cope with the resulting problems a detailed response matrix analysis has been carried out and different sets of knobs were calculated and compared. The knobs were tested at RHIC during the 2004 run and preliminary results are discussed. Simultaneously a new approach to measure the beam sizes of both colliding beams at the IP, based on the tunability provided by the knobs, was developed and tested.

  2. Scheme for rapid adjustment of network impedance

    DOE Patents [OSTI]

    Vithayathil, John J. (3814 NE. 136th Pl., Portland, OR 97230)

    1991-01-01T23:59:59.000Z

    A static controlled reactance device is inserted in series with an AC electric power transmission line to adjust its transfer impedance. An inductor (reactor) is serially connected with two back-to-back connected thyristors which control the conduction period and hence the effective reactance of the inductor. Additional reactive elements are provided in parallel with the thyristor controlled reactor to filter harmonics and to obtain required range of variable reactance. Alternatively, the static controlled reactance device discussed above may be connected to the secondary winding of a series transformer having its primary winding connected in series to the transmission line. In a three phase transmission system, the controlled reactance device may be connected in delta configuration on the secondary side of the series transformer to eliminate triplen harmonics.

  3. Permanent-magnet multipole with adjustable strength

    DOE Patents [OSTI]

    Halbach, K.

    1982-09-20T23:59:59.000Z

    Two or more magnetically soft pole pieces are symmetrically positioned along a longitudinal axis to provide a magnetic field within a space defined by the pole pieces. Two or more permanent magnets are mounted to an external magnetically-soft cylindrical sleeve which rotates to bring the permanent magnets into closer coupling with the pole pieces and thereby adjustably control the field strength of the magnetic field produced in the space defined by the pole pieces. The permanent magnets are preferably formed of rare earth cobalt (REC) material which has a high remanent magnetic field and a strong coercive force. The pole pieces and the permanent magnets have corresponding cylindrical surfaces which are positionable with respect to each other to vary the coupling there between. Auxiliary permanent magnets are provided between the pole pieces to provide additional magnetic flux to the magnetic field without saturating the pole pieces.

  4. Permanent magnet multipole with adjustable strength

    DOE Patents [OSTI]

    Halbach, Klaus (Berkeley, CA)

    1985-01-01T23:59:59.000Z

    Two or more magnetically soft pole pieces are symmetrically positioned along a longitudinal axis to provide a magnetic field within a space defined by the pole pieces. Two or more permanent magnets are mounted to an external magnetically-soft cylindrical sleeve which rotates to bring the permanent magnets into closer coupling with the pole pieces and thereby adjustably control the field strength of the magnetic field produced in the space defined by the pole pieces. The permanent magnets are preferably formed of rare earth cobalt (REC) material which has a high remanent magnetic field and a strong coercive force. The pole pieces and the permanent magnets have corresponding cylindrical surfaces which are positionable with respect to each other to vary the coupling therebetween. Auxiliary permanent magnets are provided between the pole pieces to provide additional magnetic flux to the magnetic field without saturating the pole pieces.

  5. Elliptically polarizing adjustable phase insertion device

    DOE Patents [OSTI]

    Carr, R.

    1995-01-17T23:59:59.000Z

    An insertion device for extracting polarized electromagnetic energy from a beam of particles is disclosed. The insertion device includes four linear arrays of magnets which are aligned with the particle beam. The magnetic field strength to which the particles are subjected is adjusted by altering the relative alignment of the arrays in a direction parallel to that of the particle beam. Both the energy and polarization of the extracted energy may be varied by moving the relevant arrays parallel to the beam direction. The present invention requires a substantially simpler and more economical superstructure than insertion devices in which the magnetic field strength is altered by changing the gap between arrays of magnets. 3 figures.

  6. Remote adjustable focus Raman spectroscopy probe

    DOE Patents [OSTI]

    Schmucker, John E. (Hurt, VA); Blasi, Raymond J. (Harrison City, PA); Archer, William B. (Bethel Park, PA)

    1999-01-01T23:59:59.000Z

    A remote adjustable focus Raman spectroscopy probe allows for analyzing Raman scattered light from a point of interest external probe. An environmental barrier including at least one window separates the probe from the point of interest. An optical tube is disposed adjacent to the environmental barrier and includes a long working length compound lens objective next to the window. A beam splitter and a mirror are at the other end. A mechanical means is used to translated the prove body in the X, Y, and Z directions resulting in a variable focus optical apparatus. Laser light is reflected by the beam splitter and directed toward the compound lens objective, then through the window and focused on the point of interest. Raman scattered light is then collected by the compound lens objective and directed through the beam splitter to a mirror. A device for analyzing the light, such as a monochrometer, is coupled to the mirror.

  7. Trade Adjustment Assistance Community College and Career Training...

    Broader source: Energy.gov (indexed) [DOE]

    View a list of all current Trade Adjustment Assistance Community College and Career Training (TAACCCT) grant program awards containing Energy andor Manufacturing topics. This...

  8. adjustable speed ac: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Input Voltage Sag and Unbalance on DC Link Inductor and Capacitor Stress in Adjustable Speed Drives Renewable Energy Websites Summary: 's transition into single-phase operation,...

  9. ac adjustable speed: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Input Voltage Sag and Unbalance on DC Link Inductor and Capacitor Stress in Adjustable Speed Drives Renewable Energy Websites Summary: 's transition into single-phase operation,...

  10. Adjustment Data Report for Fiscal Years Prior to 2008 | Department...

    Broader source: Energy.gov (indexed) [DOE]

    covers the adjustment data report for fiscal years prior to 2008. energydatareport.xls More Documents & Publications Reporting Guidance for Federal Agency Annual Report on Energy...

  11. ,"New York Dry Natural Gas Reserves Adjustments (Billion Cubic...

    U.S. Energy Information Administration (EIA) Indexed Site

    Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","New York Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)",1,"Annual",2013 ,"Release...

  12. Optimization Online - Robust risk adjustment in health insurance

    E-Print Network [OSTI]

    Tengjiao Xiao

    2014-08-08T23:59:59.000Z

    Aug 8, 2014 ... Abstract: Risk adjustment is used to calibrate payments to health plans based on the relative health status of insured populations and helps ...

  13. Liquid fuel vaporizer and combustion chamber having an adjustable thermal conductor

    DOE Patents [OSTI]

    Powell, Michael R; Whyatt, Greg A; Howe, Daniel T; Fountain, Matthew S

    2014-03-04T23:59:59.000Z

    The efficiency and effectiveness of apparatuses for vaporizing and combusting liquid fuel can be improved using thermal conductors. For example, an apparatus having a liquid fuel vaporizer and a combustion chamber can be characterized by a thermal conductor that conducts heat from the combustion chamber to the vaporizer. The thermal conductor can be a movable member positioned at an insertion depth within the combustion chamber that corresponds to a rate of heat conduction from the combustion chamber to the vaporizer. The rate of heat conduction can, therefore, be adjusted by positioning the movable member at a different insertion depth.

  14. CSEM WP 120 Asymmetric Price Adjustment and Consumer Search

    E-Print Network [OSTI]

    California at Berkeley. University of

    CSEM WP 120 Asymmetric Price Adjustment and Consumer Search: An Examination of the Retail Gasoline of Economics November 13, 2003 Abstract It has been documented that retail gasoline prices respond more quickly theoretical model of asymmetric adjustment that empiri- cally matches observed retail gasoline price behavior

  15. Upgrade LCDs or TVs with improved ergonomic adjustability

    E-Print Network [OSTI]

    Saskatchewan, University of

    Highlights · Upgrade LCDs or TVs with improved ergonomic adjustability · Constant Force (CFTM) patented lift-and-pivot motion technology produces smooth adjustment · Neo-Flex LCD Stand is the only range of movement to your LCD display or TV with the Neo-Flex LCD Stand! This proven technology is now

  16. Risk adjusted control charts for health care Willem Albers

    E-Print Network [OSTI]

    Al Hanbali, Ahmad

    )) strongly suggest to apply SPC methods, in particular control charts, and we shall follow that line hereRisk adjusted control charts for health care monitoring Willem Albers Department of Applied membership can be used to adjust the basic negative binomial charts to the actual risk incurred. Attention

  17. Would Border Carbon Adjustments prevent carbon leakage and heavy industry

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    No 52-2013 Would Border Carbon Adjustments prevent carbon leakage and heavy industry halshs-00870689,version1-7Oct2013 #12;Would Border Carbon Adjustments prevent carbon leakage and heavy The efficiency of unilateral climate policies may be hampered by carbon leakage and competitiveness losses

  18. 2007 Wholesale Power Rate Case Final Proposal : Wholesale Power Rate Development Study.

    SciTech Connect (OSTI)

    United States. Bonneville Power Administration.

    2006-07-01T23:59:59.000Z

    The Wholesale Power Rate Development Study (WPRDS) serves two primary purposes. It synthesizes information supplied by the other final studies that comprise the BPA rate proposal and shows the actual calculations for BPA's power rates. In addition, the WPRDS is the primary source for certain information used in establishing the power rates. Information developed in the WPRDS includes rate design (including seasonal and diurnal shapes for energy rates, demand, and load variance rates), the risk mitigation tools (Cost Recovery Adjustment Clause (CRAC), along with the [N]ational Marine Fisheries Service [F]ederal Columbia River Power System [B]iological Opinion (NFB) Adjustment, the Emergency NFB Surcharge, and Dividend Distribution Clause (DDC)), development of the Slice rate, and all discounts and other adjustments that are included in the rate schedules and the General Rate Schedule Provisions. The WPRDS also includes the description of the methodology for the Cost of Service Analysis (COSA), and the various rate design steps necessary to establish BPA's power rates. The WPRDS also shows the calculations for inter-business line revenues and expenses, the revenue forecast and, finally, includes a description of all of the rate schedules. The actual rate schedules are shown in ''Administrator's Final Record of Decision (ROD), Appendix A: 2007 Wholesale Power Rate Schedules and General Rate Schedule Provisions, WP-07-A-02''. The WPRDS also includes the Partial Resolution of Issues, shown in Attachment 1 of the ROD. The Partial Resolution of Issues affected many of the features described in this study. These are noted where appropriate.

  19. Exchange Rate Misalignments, Fiscal Federalism and Redistribution: How to Adjust in a Monetary Union

    E-Print Network [OSTI]

    Boyer, Edmond

    Union Preliminary draft Vincent Duwicquet Jacques Mazier Jamel Saadaoui 9th Euroframe Conference, jamelsaadaoui@gmail.com. 1 halshs-00848886,version1-29Jul2013 Author manuscript, published in "9th Euroframe Conference on Economic Policy Issues in the European Union, Kiel : Germany (2012)" #12;1 Introduction

  20. TI 176C Flow Rate Audits and Adjustment TABLE OF CONTENTS

    E-Print Network [OSTI]

    Fischer, Emily V.

    AND APPLICABILITY This standard operating procedure (SOP) describes the procedures for performing initial and final. The procedures followed in this situation are similar to those followed during site set up or annual maintenance, except that they are performed by the site operator rather than by field technicians. The procedure

  1. The Parameter Space of Galaxy Formation

    E-Print Network [OSTI]

    Bower, R G; Goldstein, M; Benson, A J; Lacey, C G; Baugh, C M; Cole, S; Frenk, C S; .,

    2010-01-01T23:59:59.000Z

    Semi-analytic models are a powerful tool for studying the formation of galaxies. However, these models inevitably involve a significant number of poorly constrained parameters that must be adjusted to provide an acceptable match to the observed universe. In this paper, we set out to quantify the degree to which observational data-sets can constrain the model parameters. By revealing degeneracies in the parameter space we can hope to better understand the key physical processes probed by the data. We use novel mathematical techniques to explore the parameter space of the GALFORM semi-analytic model. We base our investigation on the Bower et al. 2006 version of GALFORM, adopting the same methodology of selecting model parameters based on an acceptable match to the local bJ and K luminosity functions. The model contains 16 parameters that are poorly constrained, and we investigate this parameter space using the Model Emulator technique, constructing a Bayesian approximation to the GALFORM model that can be rapid...

  2. Rates and Repayment Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tariff Rates FY 2015 Rates and Rate Schedules **Effective October 1, 2014** FY 2014 Rates and Rate Schedules FY 2013 Rates and Rate Schedules FY 2012 Rates and Rate Schedules FY...

  3. Rates and Repayment Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Customer Letter - Preliminary Review of Drought Adder Component for 2011 Firm Power Rates 2015 Rates and Rate Schedule - Current * 2010 Rates and Rate Schedule 2009 Rates and...

  4. Rates and Repayment Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Rates and Repayment Services Consolidated Rate Schedules FY 2015 Consolidated Rate Schedules FY 2014 Rates BCP Annual Rate Process Central Arizona Project Transmission Rate Process...

  5. adjusted correlation analysis: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the quickest convergence to maxmin-fair states. Whereas Chiu-Jain model rests on a well modeling, it is still common to use Chiu-Jain model for comparison of binary adjust-...

  6. An asset-pricing view of external adjustment

    E-Print Network [OSTI]

    Pavlova, Anna

    Recent literature has argued that conventional measures of external sustainability – the trade balance and current account – are misleading because they omit capital gains on net foreign asset positions. We adjust the ...

  7. ADJUSTMENT COEFFICIENT FOR RISK PROCESSES IN SOME DEPENDENT CONTEXTS

    E-Print Network [OSTI]

    Maume-Deschamps, Véronique

    ADJUSTMENT COEFFICIENT FOR RISK PROCESSES IN SOME DEPENDENT CONTEXTS H. COSSETTE, E. MARCEAU, AND V, ruin theory, non para- metric estimation, weak dependence. . 1 #12;2 H. COSSETTE, E. MARCEAU, AND V

  8. ADJUSTMENT COEFFICIENT FOR RISK PROCESSES IN SOME DEPENDENT CONTEXTS

    E-Print Network [OSTI]

    Boyer, Edmond

    ADJUSTMENT COEFFICIENT FOR RISK PROCESSES IN SOME DEPENDENT CONTEXTS H. COSSETTE, E. MARCEAU, AND V" DOI : 10.1007/s11009-010-9182-y #12;2 H. COSSETTE, E. MARCEAU, AND V. MAUME-DESCHAMPS with UTu = u

  9. A Study of Adjustable Speed Drive Applications for Pumps

    E-Print Network [OSTI]

    Triezenberg, D. M.; Lakhavani, S. T.

    1983-01-01T23:59:59.000Z

    A STUDY OF ADJUSTABLE SPEED DRIVE APPLICATIONS FOR PUMPS D. M. Triezenberg and S. T. Lakhavani Westinghouse R&D Center Pittsburgh, Pennsylvania ABSTRACT We have undertaken a survey and analysis of potential ASD applications for pumps in U...

  10. Support assembly having three dimension position adjustment capabilities

    DOE Patents [OSTI]

    Cutburth, R.W.; House, F.A.

    1985-11-08T23:59:59.000Z

    An assembly for supporting an apparatus such as a microscope or laser to and against a planer surface is disclosed herein. This apparatus includes three specific arrangements for adjusting the positions of three segments of the apparatus so as to adjust the position of the overall apparatus with respect to the planer surface in the x-, y- and z-directions, where the x-direction and the y-direction are both parallel with the planer surface and perpendicular to one another and where the z-direction is perpendicular to the planer surface and the x- and y-directions. Each of two of the three arrangements includes its own means for providing x-, y- and z-adjustments (which includes rotation in the x, y plane) while it is only necessary for the third arrangement to provide adjustments in the z-direction.

  11. Parameters for landfill-liner leak-rate model

    E-Print Network [OSTI]

    Bahrt, Steven Carlton

    1985-01-01T23:59:59.000Z

    Geophysical Union, Washington, D. C. CHAPTER II HAZARDOUS WASTE DISPOSAL OVERVIEW The passage of the Resource Conservation and Recovery Act (RCRA) by Congress in 1976 signaled an official recogn1tion of the shortcomings of then current hazardous waste... in industrial waste streams. The Clean Water Act of 1972 had already imposed technology-forcing standards on industrial polluters of surface waters (OTA, 1983). Under the authority of RCRA, the United States Environmental Protection Agency ( EPA) 1ssued...

  12. APS Storage Ring Parameters

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Main Parameters APS Storage Ring Parameters M. Borland, G. Decker, L. Emery, W. Guo, K. Harkay, V. Sajaev, C.-Y. Yao Advanced Photon Source September 8, 2010 This document list the...

  13. Rates and Repayment Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Rates and Repayment Services Rates Loveland Area Projects Firm Power Rates Open Access Transmission Tariff Rates Chart of Loveland Area Projects Historical Transmission Rates...

  14. Direct estimation of decoherence rates

    E-Print Network [OSTI]

    Vladimír Bužek; Peter Rapcan; Jochen Rau; Mario Ziman

    2012-07-30T23:59:59.000Z

    The decoherence rate is a nonlinear channel parameter that describes quantitatively the decay of the off-diagonal elements of a density operator in the decoherence basis. We address the question of how to experimentally access such a nonlinear parameter directly without the need of complete process tomography. In particular, we design a simple experiment working with two copies of the channel, in which the registered mean value of a two-valued measurement directly determines the value of the average decoherence rate. No prior knowledge of the decoherence basis is required.

  15. GLOBAL GLACIAL ISOSTATIC ADJUSTMENT: TARGET FIELDS FOR SPACE GEODESY

    E-Print Network [OSTI]

    Peltier, W. Richard

    GLOBAL GLACIAL ISOSTATIC ADJUSTMENT: TARGET FIELDS FOR SPACE GEODESY W.R. Peltier Department of Physics, University of Toronto, Toronto, Ontario, Canada M5S-1A7 peltier) and Sabadini and Peltier (1981) whose analysis was based upon the application of a homogeneous viscoelastic

  16. Respiratory and Cardiovascular Adjustments to Exercise in Reptiles

    E-Print Network [OSTI]

    Bennett, Albert F.

    challenges to the respiratory system of reptiles. Incrementing aerobic metabolism above resting levelsRespiratory and Cardiovascular Adjustments to Exercise in Reptiles T.T. GLEESON ' and A.F. BEN NETT all levels of activity (Fig. lb). The mechanism for an- aerobic energy production during exercise

  17. Estimation in Covariate Adjusted Regression Damla Senturk1

    E-Print Network [OSTI]

    Sentürk, Damla

    confounder in a multiplicative fashion. One example is data collected for a study on diabetes, where adjusted for the effects of the confounders. One example is data collected for a study on diabetes (Willems for diabetes, including cholesterol and hypertension, and diagnostic variables, such as glycosolated hemoglobin

  18. Saving Energy by Adjusting Transmission Power in Wireless Sensor Networks

    E-Print Network [OSTI]

    Rowe, Neil C.

    Saving Energy by Adjusting Transmission Power in Wireless Sensor Networks Xiao Chen Department and communication areas. Energy-efficient communication is an important issue in WSNs because of the limited power propose methods to reduce communication energy by minimizing the total sensor trans- mission power

  19. On Adjusting Power to Defend Wireless Networks from Jamming

    E-Print Network [OSTI]

    Xu, Wenyuan

    1 On Adjusting Power to Defend Wireless Networks from Jamming Wenyuan Xu Department of Computer}@engr.sc.edu Abstract-- Wireless networks are susceptible to accidental or intentional radio interference. One way, we turn to examining the more complicated scenario consisting of a multi- hop wireless network. We

  20. OPERATIONAL BUDGET ADJUSTMENTS: FOCUSING RESOURCES TO 2016 AND BEYOND

    E-Print Network [OSTI]

    Saskatchewan, University of

    OPERATIONAL BUDGET ADJUSTMENTS: FOCUSING RESOURCES TO 2016 AND BEYOND EMMA LAKE KENDERDINE CAMPUS. This decision, while difficult, was necessary in a time of budget restraint. In addition to saving budget, in 2008 the Provost's Committee on Integrated Planning (PCIP) began providing an annual

  1. Bias adjustment of radar-based 3-hour precipitation accumulations

    E-Print Network [OSTI]

    Stoffelen, Ad

    projection of KNMI radar images 55 4 #12;Chapter 1 Introduction Since June 2003 a daily gauge is generated at 1400 UTC when the majority of the manual gauge observations have been reported. The radar-gaugeBias adjustment of radar-based 3-hour precipitation accumulations Iwan Holleman Technical Report

  2. Movement Planning and Simulation for Attitude Adjustment of a Drilling Robot

    E-Print Network [OSTI]

    Movement Planning and Simulation for Attitude Adjustment of a Drilling Robot Chengkun Wang planning method for attitude adjustment of a drilling robot is presented in this paper. The double eccentric discs normal adjustment mechanism is used in the robot to adjust the attitude of the drill axis

  3. Estimates of Biogenic Methane Production Rates in Deep Marine Sediments at Hydrate Ridge, Cascadia Margin

    SciTech Connect (OSTI)

    F. S. Colwell; S. Boyd; M. E. Delwiche; D. W. Reed; T. J. Phelps; D. T. Newby

    2008-06-01T23:59:59.000Z

    Methane hydrate found in marine sediments is thought to contain gigaton quantities of methane and is considered an important potential fuel source and climate-forcing agent. Much of the methane in hydrates is biogenic, so models that predict the presence and distribution of hydrates require accurate rates of in situ methanogenesis. We estimated the in situ methanogenesis rates in Hydrate Ridge (HR) sediments by coupling experimentally derived minimal rates of methanogenesis to methanogen biomass determinations for discrete locations in the sediment column. When starved in a biomass recycle reactor Methanoculleus submarinus produced ca. 0.017 fmol methane/cell/day. Quantitative polymerase chain reaction (QPCR) directed at the methyl coenzyme M reductase subunit A (mcrA) gene indicated that 75% of the HR sediments analyzed contained <1000 methanogens/g. The highest methanogen numbers were mostly from sediments <10 meters below seafloor. By combining methanogenesis rates for starved methanogens (adjusted to account for in situ temperatures) and the numbers of methanogens at selected depths we derived an upper estimate of <4.25 fmol methane produced/g sediment/day for the samples with fewer methanogens than the QPCR method could detect. The actual rates could vary depending on the real number of methanogens and various seafloor parameters that influence microbial activity. However, our calculated rate is lower than rates previously reported from such sediments and close to the rate derived using geochemical modeling of the sediments. These data will help to improve models that predict microbial gas generation in marine sediments and determine the potential influence of this source of methane on the global carbon cycle.

  4. CONTINUOSLY STIRRED TANK REACTOR PARAMETERS THAT AFFECT SLUDGE BATCH 6 SIMULANT PROPERTIES

    SciTech Connect (OSTI)

    Newell, J.; Lambert, D.; Stone, M.; Fernandez, A.

    2010-05-28T23:59:59.000Z

    The High Level Radioactive Waste (HLW) Sludge in Savannah River Site (SRS) waste tanks was produced over a period of over 60 years by neutralizing the acidic waste produced in the F and H Separations Canyons with sodium hydroxide. The HLW slurries have been stored at free hydroxide concentrations above 1 M to minimize the corrosion of the carbon steel waste tanks. Sodium nitrite is periodically added as a corrosion inhibitor. The resulting waste has been subjected to supernate evaporation to minimize the volume of the stored waste. In addition, some of the waste tanks experienced high temperatures so some of the waste has been at elevated temperatures. Because the waste is radioactive, the waste is transforming through the decay of shorter lived radioactive species and the radiation damage that the decay releases. The goal of the Savannah River National Laboratory (SRNL) simulant development program is to develop a method to produce a sludge simulant that matches both the chemical and physical characteristics of the HLW without the time, temperature profile, chemical or radiation exposure of that of the real waste. Several different approaches have been taken historically toward preparing simulated waste slurries. All of the approaches used in the past dozen years involve some precipitation of the species using similar chemistry to that which formed the radioactive waste solids in the tank farm. All of the approaches add certain chemical species as commercially available insoluble solid compounds. The number of species introduced in this manner, however, has varied widely. All of the simulant preparation approaches make the simulated aqueous phase by adding the appropriate ratios of various sodium salts. The simulant preparation sequence generally starts with an acidic pH and ends up with a caustic pH (typically in the 10-12 range). The current method for making sludge simulant involves the use of a temperature controlled continuously stirred tank reactor (CSTR). Precipitated MnO{sub 2} is combined with metal nitrates and fed into the CSTR. The metals are precipitated by a caustic NaOH stream. The rates at which these streams are added allows for pH adjustment of the mixture. A graphical representation of this process is given in Figure 1. In using the CSTR method for developing simulant, there are various parameters that can be adjusted in order to effectuate a physical change in the resulting simulant: pH, temperature, mixing speed, and flow rate. How will changing these parameters affect the physical properties of the sludge simulant? The ability to determine which parameter affects a particular property could allow one to develop a simulant that would better match the physical characteristics of HLW sludge.

  5. Adjustable Speed AC Motor Drives-Applications Problems

    E-Print Network [OSTI]

    Enjeti, P.

    Adjustable Speed AC Motor Drives Applications Problems by Dr. P. Enjeti Power Quality Laboratory Department ofElectrical Engineering Texas A&M University College Station, TX 77843 Tel: 409-845-7466 Fax: 409-845-6259 Email..., it generates side effects, some which have been recognized only recently. This paper presents a comprehensive coverage of application issues of PWM inverter controlled ac motor drives which include damage to motor insulation due to reflected voltages caused...

  6. Pavement Thickness Design Parameter

    E-Print Network [OSTI]

    Pavement Thickness Design Parameter Impacts 2012 Municipal Streets Seminar November 14, 2012 Paul D. Wiegand, P.E. #12;Pavement Thickness Design · How do cities decide how thick to build their pavements;Pavement Thickness Design · Correct answer ­ A data-based analysis! · Doesn't have to be difficult and time

  7. Integrated System Transmission and Ancillary Services Rate Calculation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    16 General & Intangible (line 4 - line 10) 0 0 17 Common (line 5 - line 11) 0 0 18 TOTAL NET PLANT (sum lines 13-17) 1,138,837,982 NP 57.623% 656,232,236 ADJUSTMENTS TO RATE BASE...

  8. Integrated System Transmission and Ancillary Services Rate Calculation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    16 General & Intangible (line 4 - line 10) 0 0 17 Common (line 5 - line 11) 0 0 18 TOTAL NET PLANT (sum lines 13-17) 1,173,043,233 NP 55.592% 652,122,156 ADJUSTMENTS TO RATE BASE...

  9. Chlorite Dissolution Rates

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Carroll, Susan

    Spreadsheets provides measured chlorite rate data from 100 to 300C at elevated CO2. Spreadsheet includes derived rate equation.

  10. Chlorite Dissolution Rates

    SciTech Connect (OSTI)

    Carroll, Susan

    2013-07-01T23:59:59.000Z

    Spreadsheets provides measured chlorite rate data from 100 to 300C at elevated CO2. Spreadsheet includes derived rate equation.

  11. The Interest Rate Conundrum

    E-Print Network [OSTI]

    Craine, Roger; Martin, Vance L.

    2009-01-01T23:59:59.000Z

    Flows and US Interest Rates,” NBER Working Paper No 12560. [Working Paper # 2008 -03 The Interest Rate Conundrum Roger

  12. Parameterizing the Deceleration Parameter

    E-Print Network [OSTI]

    Diego Pavón; Ivan Duran; Sergio del Campo; Ramón Herrera

    2012-12-31T23:59:59.000Z

    We propose and constrain with the latest observational data three parameterizations of the deceleration parameter, valid from the matter era to the far future. They are well behaved and do not diverge at any redshift. On the other hand, they are model independent in the sense that in constructing them the only assumption made was that the Universe is homogeneous and isotropic at large scales.

  13. Maximum Network Lifetime in Wireless Sensor Networks with Adjustable Sensing Ranges

    E-Print Network [OSTI]

    Wu, Jie

    1 Maximum Network Lifetime in Wireless Sensor Networks with Adjustable Sensing Ranges Mihaela problem in wireless sensor networks with adjustable sensing range. Communication and sensing consume Wireless sensor networks (WSNs) constitute the foundation of a broad range of applications related

  14. Engine control system having fuel-based adjustment

    DOE Patents [OSTI]

    Willi, Martin L. (Dunlap, IL); Fiveland, Scott B. (Metamora, IL); Montgomery, David T. (Edelstein, IL); Gong, Weidong (Dunlap, IL)

    2011-03-15T23:59:59.000Z

    A control system for an engine having a cylinder is disclosed having an engine valve configured to affect a fluid flow of the cylinder, an actuator configured to move the engine valve, and an in-cylinder sensor configured to generate a signal indicative of a characteristic of fuel entering the cylinder. The control system also has a controller in communication with the actuator and the sensor. The controller is configured to determine the characteristic of the fuel based on the signal and selectively regulate the actuator to adjust a timing of the engine valve based on the characteristic of the fuel.

  15. Kansas Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40 Building FloorspaceThousandWithdrawals0.0Decade Year-0Base7 3 2 1301Adjustments

  16. Kentucky Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40 Buildingto China (Million Cubic Feet) Kenai, AK LiquefiedCubicAdjustments

  17. Mississippi Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40 Buildingto China (Million Cubic Feet)Commercialper Thousand70 349252Adjustments

  18. Texas Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122Commercial ConsumersThousandCubicSeparation 7,559 8,762 10,130Adjustments

  19. Alabama Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National and Regional Data; Row: NAICS8) Distribution Category UC-950 Cost and Quality of Fuels forA 6 J 9 U B u o f l d w3,290 2,871Adjustments

  20. Alaska Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National and Regional Data; Row: NAICS8) Distribution Category UC-950 Cost and Quality of Fuels forA 6 J 9 U B uYear Jan Feb MarAdjustments

  1. Colorado Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40CoalLease(Billion2,128 2,469 2,321Spain (Million Cubic 1.Year Jan3,302Adjustments

  2. West Virginia Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122Commercial602 1,397 125 Q 69 (Million Cubic58 810Year Jan Feb39,28720 21Adjustments

  3. Wyoming Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122Commercial602 1,397 125 Q 69 (MillionAdjustments (Billion Cubic Feet) Wyoming Dry

  4. U.S. Shale Proved Reserves Adjustments (Billion Cubic Feet)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40 Buildingto17 34 44Year Jan Feb MarDecade Year-0 Year-1(Billion- -Adjustments

  5. Utah Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40 Buildingto17 34 44Year Jan Feb MarDecadeFour-Dimensional2009893 725Adjustments

  6. Oklahoma Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5 Tables July 1996 Energy Information Administration Office ofthroughYear Jan Feb Mar Apr May Jun Jul9Thousand CubicAdjustments (Billion

  7. Pennsylvania Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5 Tables July 1996 Energy Information Administration Office ofthroughYear Jan Feb Mar Apr MayYear Jan MonthlyCubic17 34 44Adjustments

  8. 2007 Wholesale Power Rate Case Initial Proposal : Direct Testimony.

    SciTech Connect (OSTI)

    United States. Bonneville Power Administration.

    2005-11-01T23:59:59.000Z

    The purpose of our testimony is to sponsor the rate design portions of Bonneville Power Administration's (BPA) Wholesale Power Rate Development Study (WPRDS), WP-07-E-BPA-05, and associated portions of the Wholesale Power Rate Schedules and GRSPs (WP-07-E-BPA-07). Our testimony is organized in eight sections. The first section outlines the purpose of our testimony. Section 2 describes BPA's Demand Rates, including subsections on the definition of the Demand Rate, the method for computing the Demand Rates, and differences from the currently effective WP-02 Demand Rate. Section 3 describes BPA's Load Variance Rate, with subsections on the definition and purpose of the Load Variance Rate, application of the Load Variance Rate, how the Load Variance Rate is calculated, and the differences from the WP-02 Load Variance Rate. Section 4 describes the steps involved in developing BPA's energy rates and differences from the WP-02 rate case. Section 5 discusses discontinuation of the Stepped Up Multi-Year Block Rate. Section 6 describes a minor change to the Unauthorized Increase Rates and the Excess Factoring Rates. Section 7 describes the Targeted Adjustment Charge. Section 8 addresses the Operating Reserves Credit.

  9. A review of statistical methods for the meteorological adjustment of tropospheric ozone

    E-Print Network [OSTI]

    Washington at Seattle, University of

    A review of statistical methods for the meteorological adjustment of tropospheric ozone Mary Lou adjustment of tropospheric ozone Mary Lou Thompson1 Joel Reynolds1 Lawrence H. Cox2 Peter Guttorp1 Paul D.larry@epamail.epa.gov ABSTRACT: A variety of statistical methods for meteorological adjustment of ozone have been proposed

  10. Constraining Climate Model Parameters from Observed 20th Century Changes

    E-Print Network [OSTI]

    Forest, Chris Eliot

    We present revised probability density functions for climate model parameters (effective climate sensitivity, the rate of deep-ocean heat uptake, and the strength of the net aerosol forcing) that are based on climate change ...

  11. adjust efficacy estimates: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Entropy Estimation Vincent Q. Vu Mathematics Websites Summary: -likelihood, the Good-Turing coverage estimate and the total probability of unobserved words converge at rate OP...

  12. Parameter Variation Analysis for Voltage Controlled Oscillators in Phase-Locked Loops

    E-Print Network [OSTI]

    Moon, Un-Ku

    Parameter Variation Analysis for Voltage Controlled Oscillators in Phase-Locked Loops Igor Vytyaz), the oscillation frequency of a voltage-controlled oscillator (VCO) is specified by the reference frequency on the oscillation frequency as the PLL adjusts the control voltage to keep the frequency unchanged. More importantly

  13. Decentralized Control of Power Systems via Robust Control of Uncertain Markov Jump Parameter Systems

    E-Print Network [OSTI]

    Pota, Himanshu Roy

    are regulated by small disturbance controllers whose gains are adjusted for variations in power system model due control of small disturbances in interconnected power systems. The linearized power system dynamic modelDecentralized Control of Power Systems via Robust Control of Uncertain Markov Jump Parameter

  14. Performance Parameters for Grid-Connected PV Systems

    SciTech Connect (OSTI)

    Marion, B.; Adelstein, J.; Boyle, K.; Hayden, H.; Hammond, B.; Fletcher, T.; Canada, B.; Narang, D.; Shugar, D.; Wenger, H.; Kimber, A.; Mitchell, L.; Rich, G.; Townsend, T.

    2005-02-01T23:59:59.000Z

    The use of appropriate performance parameters facilitates the comparison of grid-connected photovoltaic (PV) systems that may differ with respect to design, technology, or geographic location. Four performance parameters that define the overall system performance with respect to the energy production, solar resource, and overall effect of system losses are the following: final PV system yield, reference yield, performance ratio, and PVUSA rating. These performance parameters are discussed for their suitability in providing desired information for PV system design and performance evaluation and are demonstrated for a variety of technologies, designs, and geographic locations. Also discussed are methodologies for determining system a.c. power ratings in the design phase using multipliers developed from measured performance parameters.The use of appropriate performance parameters facilitates the comparison of grid-connected photovoltaic (PV) systems that may differ with respect to design, technology, or geographic location. Four performance parameters that define the overall system performance with respect to the energy production, solar resource, and overall effect of system losses are the following: final PV system yield, reference yield, performance ratio, and PVUSA rating. These performance parameters are discussed for their suitability in providing desired information for PV system design and performance evaluation and are demonstrated for a variety of technologies, designs, and geographic locations. Also discussed are methodologies for determining system a.c. power ratings in the design phase using multipliers developed from measured performance parameters.

  15. The energy balancing parameter

    E-Print Network [OSTI]

    Walton R. Gutierrez

    2011-05-10T23:59:59.000Z

    A parameter method is introduced in order to estimate the relationship among the various variables of a system in equilibrium, where the potential energy functions are incompletely known or the quantum mechanical calculations very difficult. No formal proof of the method is given; instead, a sufficient number of valuable examples are shown to make the case for the method's usefulness in classical and quantum systems. The mathematical methods required are quite elementary: basic algebra and minimization of power functions. This method blends advantageously with a simple but powerful approximate method for quantum mechanics, sidestepping entirely formal operators and differential equations. It is applied to the derivation of various well-known results involving centrally symmetric potentials for a quantum particle such as the hydrogen-like atom, the elastic potential and other cases of interest. The same formulas provide estimates for previously unsolved cases. PACS: 03.65.-w 30.00.00

  16. BCP Annual Rate Process

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2015 BCP Annual Rate Process (FY 2016 Base Charge & Rate) Informal Process Rate Activity Schedule (doc) Informal Customer Meeting Thursday March 11, 2015 at 10:30 A.M. Conf Rms 3&4...

  17. Programmable Differential Delay Circuit With Fine Delay Adjustment

    DOE Patents [OSTI]

    DeRyckere, John F. (Eau Claire, WI); Jenkins, Philip Nord (Eau Claire, WI); Cornett, Frank Nolan (Chippewa Falls, WI)

    2002-07-09T23:59:59.000Z

    Circuitry that provides additional delay to early arriving signals such that all data signals arrive at a receiving latch with same path delay. The delay of a forwarded clock reference is also controlled such that the capturing clock edge will be optimally positioned near quadrature (depending on latch setup/hold requirements). The circuitry continuously adapts to data and clock path delay changes and digital filtering of phase measurements reduce errors brought on by jittering data edges. The circuitry utilizes only the minimum amount of delay necessary to achieve objective thereby limiting any unintended jitter. Particularly, this programmable differential delay circuit with fine delay adjustment is designed to allow the skew between ASICS to be minimized. This includes skew between data bits, between data bits and clocks as well as minimizing the overall skew in a channel between ASICS.

  18. Adjustable Nonlinear Springs to Improve Efficiency of Vibration Energy Harvesters

    E-Print Network [OSTI]

    S. Boisseau; G. Despesse; B. Ahmed Seddik

    2015-06-01T23:59:59.000Z

    Vibration Energy Harvesting is an emerging technology aimed at turning mechanical energy from vibrations into electricity to power microsystems of the future. Most of present vibration energy harvesters are based on a mass spring structure introducing a resonance phenomenon that allows to increase the output power compared to non-resonant systems, but limits the working frequency bandwidth. Therefore, they are not able to harvest energy when ambient vibrations' frequencies shift. To follow shifts of ambient vibration frequencies and to increase the frequency band where energy can be harvested, one solution consists in using nonlinear springs. We present in this paper a model of adjustable nonlinear springs (H-shaped springs) and their benefits to improve velocity-damped vibration energy harvesters' (VEH) output powers. A simulation on a real vibration source proves that the output power can be higher in nonlinear devices compared to linear systems (up to +48%).

  19. Research Rate Liaison Rate for outside academic &

    E-Print Network [OSTI]

    Gilchrist, James F.

    as of 12/9/13 External Rate Spark Plasma Sintering ) Spark Plasma Sintering > 24 hrs 2 8 Vacuum Hot Press

  20. 2012 Transmission Rate Schedules

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2014 Transmission, Ancillary, and Control Area Service Rate Schedules and General Rate Schedule Provisions (FY 2014-2015) October 2013 United States Department of Energy...

  1. Effective Rate Period

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    10012014 - 03312015 Mid-Year Change (if applicable) 10012014 - 09302015 Power Rates Annual Revenue Requirement Rate Schedule Power Revenue Requirement 70,091,227 CV-F13...

  2. Effective Rate Period

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of the FY Mid-Year Change 10012013 - 03312014 04012014 - 09302014 Power Rates Annual Revenue Requirement Rate Schedule Power Revenue Requirement 73,441,557...

  3. Multiple System Rate Process

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DSW Multiple System Transmission Rate Process Federal Register Notice Withdrawing Rate Proposal (PDF) Formal Process Extension Federal Register Notice (PDF) Customer Savisngs Under...

  4. Structural Detuning of Pump Absorption Rate in Doped Fiber for the Enhancement of Power Conversion Efficiency

    E-Print Network [OSTI]

    Park, Namkyoo

    Structural Detuning of Pump Absorption Rate in Doped Fiber for the Enhancement of Power Conversion Doped Fiber Amplifier. With proper adjustments on doping profiles for the reduction of pump absorption rate, it becomes possible to optimize pump evolution map inside the doped fiber to get better power

  5. Estimating Building Simulation Parameters via Bayesian Structure Learning

    SciTech Connect (OSTI)

    Edwards, Richard E [ORNL; New, Joshua Ryan [ORNL; Parker, Lynne Edwards [ORNL

    2013-01-01T23:59:59.000Z

    Many key building design policies are made using sophisticated computer simulations such as EnergyPlus (E+), the DOE flagship whole-building energy simulation engine. E+ and other sophisticated computer simulations have several major problems. The two main issues are 1) gaps between the simulation model and the actual structure, and 2) limitations of the modeling engine's capabilities. Currently, these problems are addressed by having an engineer manually calibrate simulation parameters to real world data or using algorithmic optimization methods to adjust the building parameters. However, some simulations engines, like E+, are computationally expensive, which makes repeatedly evaluating the simulation engine costly. This work explores addressing this issue by automatically discovering the simulation's internal input and output dependencies from 20 Gigabytes of E+ simulation data, future extensions will use 200 Terabytes of E+ simulation data. The model is validated by inferring building parameters for E+ simulations with ground truth building parameters. Our results indicate that the model accurately represents parameter means with some deviation from the means, but does not support inferring parameter values that exist on the distribution's tail.

  6. adjust total dose: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    doses and cancer rates to the workers m the first Soviet atom-bomb facility, near 2 Chelyabinsk and 4,600 at the plutonium sep- aration plant. If we allow for an average work...

  7. Tap Density Equations of Granular Powders Based on the Rate Process Theory and the Free Volume Concept

    E-Print Network [OSTI]

    Tian Hao

    2014-09-05T23:59:59.000Z

    Tap density of a granular powder is often linked to the flowability via Carr Index that measures how tight a powder can be packed, under an assumption that more easily packed powders usually flow poorly. Understanding how particles are packed is important for revealing why a powder flows better than others. There are two types of empirical equations that were proposed to fit the experimental data of packing fractions vs. numbers of taps in literature: The inverse logarithmic and the stretched exponential. Using the rate process theory and the free volume concept, we obtain the tap density equations and they can be reducible to the two empirical equations currently widely used in literature. Our equations could potentially fit experimental data better with an additional adjustable parameter. The tapping amplitude and frequency, the weight of the granular materials, and the environment temperature are grouped into one parameter that weighs the pace of packing process. The current results, in conjunction with our previous findings, may imply that both dry(granular)and wet(colloidal and polymeric) particle systems are governed by the same physical mechanisms in term of the role of the free volume and how particles behave (a rate controlled process).

  8. Adjustment patterns to commodity terms of trade shocks: the role of exchange rate and international reserves policies

    E-Print Network [OSTI]

    Aizenman, Joshua; Edwards, Sebastian; Riera-Crichton, Daniel

    2012-01-01T23:59:59.000Z

    Panama, Paraguay, Peru, Uruguay and Venezuela. The data insuch as Argentina, Brazil, and Uruguay, with statisticallyNicaragua, Peru and Uruguay suffer real depreciations after

  9. An economic analysis of alternative stocking rate adjustment strategies for short duration grazing systems in the Texas Rolling Plains 

    E-Print Network [OSTI]

    Riechers, Robin Keith

    1986-01-01T23:59:59.000Z

    ) conclude that effiency of harvest by the grazing animal is the primary concept that SDG is based on. The literature indicates the interaction effects between efficiency of harvest, forage quality and production, and t'ne grazing animal are extremely...

  10. Adjustment patterns to commodity terms of trade shocks: the role of exchange rate and international reserves policies

    E-Print Network [OSTI]

    Aizenman, Joshua; Edwards, Sebastian; Riera-Crichton, Daniel

    2012-01-01T23:59:59.000Z

    in our sample: Argentina, Bolivia, Brazil, Chile, Colombia,In our sample, only Bolivia displays a negative andcurrency. In effect, only Bolivia and Nicaragua show

  11. July 17, 2006 Letter regarding the Final Record of Decision (ROD) for the 2007 Wholesale Power Rate Adjustment Proceeding

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn12electron beamJoin2015 Bonneville Power Administration is

  12. LUNAR SOIL SIMULATION TRAFFICABILITY PARAMETERS

    E-Print Network [OSTI]

    Rathbun, Julie A.

    LUNAR SOIL SIMULATION and TRAFFICABILITY PARAMETERS by W. David Carrier, III Lunar Geotechnical.0 RECOMMENDED LUNAR SOIL TRAFFICABILITY PARAMETERS Table 9.14 in the Lunar Sourcebook (Carrier et al. 1991, p. 529) lists the current recommended lunar soil trafficability parameters: bc = 0.017 N/cm2 bN = 35° K

  13. Subsurface Geotechnical Parameters Report

    SciTech Connect (OSTI)

    D. Rigby; M. Mrugala; G. Shideler; T. Davidsavor; J. Leem; D. Buesch; Y. Sun; D. Potyondy; M. Christianson

    2003-12-17T23:59:59.000Z

    The Yucca Mountain Project is entering a the license application (LA) stage in its mission to develop the nation's first underground nuclear waste repository. After a number of years of gathering data related to site characterization, including activities ranging from laboratory and site investigations, to numerical modeling of processes associated with conditions to be encountered in the future repository, the Project is realigning its activities towards the License Application preparation. At the current stage, the major efforts are directed at translating the results of scientific investigations into sets of data needed to support the design, and to fulfill the licensing requirements and the repository design activities. This document addresses the program need to address specific technical questions so that an assessment can be made about the suitability and adequacy of data to license and construct a repository at the Yucca Mountain Site. In July 2002, the U.S. Nuclear Regulatory Commission (NRC) published an Integrated Issue Resolution Status Report (NRC 2002). Included in this report were the Repository Design and Thermal-Mechanical Effects (RDTME) Key Technical Issues (KTI). Geotechnical agreements were formulated to resolve a number of KTI subissues, in particular, RDTME KTIs 3.04, 3.05, 3.07, and 3.19 relate to the physical, thermal and mechanical properties of the host rock (NRC 2002, pp. 2.1.1-28, 2.1.7-10 to 2.1.7-21, A-17, A-18, and A-20). The purpose of the Subsurface Geotechnical Parameters Report is to present an accounting of current geotechnical information that will help resolve KTI subissues and some other project needs. The report analyzes and summarizes available qualified geotechnical data. It evaluates the sufficiency and quality of existing data to support engineering design and performance assessment. In addition, the corroborative data obtained from tests performed by a number of research organizations is presented to reinforce conclusions derived from the pool of data gathered within a full QA-controlled domain. An evaluation of the completeness of the current data is provided with respect to the requirements for geotechnical data to support design and performance assessment.

  14. Adjustable Shock Test Sled for Haversine Pulses at 250 fps

    SciTech Connect (OSTI)

    Troy Hartwig; Brent Hower; Aaron Seaholm

    2008-05-05T23:59:59.000Z

    New test requirements were developed by Sandia National Laboratory to simulate a regime of shock testing not previously performed at the Kansas City Plant operated by Honeywell Federal Manufacturing & Technologies. These environments were unique in that they involved amplitude of shock >1000g with relatively long pulse durations (greater 5 ms but less than 10 ms) and involved velocity changes up to 235 ft/sec. Ten months were available to develop, design, manufacture and prove-in this new capability. We designed a new shock sled to deliver this new family of shock environments in a laboratory test. The performance range of the new sled includes five specific shocks (1000 g – 8 ms, 1300 - 6 ms, 1500 g – 5.4 ms, 1950 g – 6 ms, 2250 g – 5.4 ms; all haversine shaped), and it also incorporates adjustability to accommodate new shocks within this range. These shock environments result in velocity changes ranging from 160 fps to 250 fps. The test sled accommodates test articles weighing up to 20 lbs and measuring up to 10” along any axis.

  15. Apparatus for adjustably controlling valve movement and fuel injection

    SciTech Connect (OSTI)

    Miller, C.R.; Shyu, T.P.; Weber, J.R.

    1993-08-24T23:59:59.000Z

    Apparatus is described for adjustably controlling valve movement and fuel injection of an engine having at least one fuel injection system, one exhaust valve system, one intake valve system, a microprocessor controller for receiving input signals and delivering engine controlling electrical signals, and a liquid pressure system, comprising: a single piezoelectric motor connectable to the microprocessor controller and the liquid pressure system and being adapted to receive engine controlling electrical signals from the microprocessor and controllably delivering pressurized liquid signals to the liquid pressure system in response to the received signal; and a spool valve having a single spool, the valve having a plurality of inlets and outlets and being connectable to the liquid pressure system for receiving pressurized liquid signals therefrom and controllably moving the single spool of the spool valve and delivering valve and injection controlling signals to the valve systems and injector system and controlling both valve movement and fuel injection responsive to engine controlling electrical signals received by the piezoelectric motor.

  16. Capacitor charging FET switcher with controller to adjust pulse width

    DOE Patents [OSTI]

    Mihalka, Alex M. (Livermore, CA)

    1986-01-01T23:59:59.000Z

    A switching power supply includes an FET full bridge, a controller to drive the FETs, a programmable controller to dynamically control final output current by adjusting pulse width, and a variety of protective systems, including an overcurrent latch for current control. Power MOSFETS are switched at a variable frequency from 20-50 kHz to charge a capacitor load from 0 to 6 kV. A ferrite transformer steps up the DC input. The transformer primary is a full bridge configuration with the FET switches and the secondary is fed into a high voltage full wave rectifier whose output is connected directly to the energy storage capacitor. The peak current is held constant by varying the pulse width using predetermined timing resistors and counting pulses. The pulse width is increased as the capacitor charges to maintain peak current. A digital ripple counter counts pulses, and after the desired number is reached, an up-counter is clocked. The up-counter output is decoded to choose among different resistors used to discharge a timing capacitor, thereby determining the pulse width. A current latch shuts down the supply on overcurrent due to either excessive pulse width causing transformer saturation or a major bridge fault, i.e., FET or transformer failure, or failure of the drive circuitry.

  17. Adjustment, Political Transition, and the Organization of Military Power in Nigeria

    E-Print Network [OSTI]

    Ihonvbere, Julius O.

    1991-01-01T23:59:59.000Z

    and Cambridge Universities in Nigeria, Lagos. May 1990. 44future after NOTES 1 "Nigeria: Taming the Army," AfricanPhillips, Economic Impact of Nigeria's Structural Adjustment

  18. ADJUSTMENT COSTS, LEARNING-BY-DOING, AND TECHNOLOGY ADOPTION UNDER UNCERTAINTY

    E-Print Network [OSTI]

    Pavlova, Anna

    2003-01-27T23:59:59.000Z

    We consider a variety of vintage capital models of a firm's choice of technology under uncertainty in the presence of adjustment costs and technology-specific learning. ...

  19. Asymmetric Price Adjustment and Consumer Search: An Examination of the Retail Gasoline Market

    E-Print Network [OSTI]

    Lewis, Matt

    2003-01-01T23:59:59.000Z

    The Behavior of Retail Gasoline Prices: Symmetric or Not? ”Adjustment of U.K. Retail Gasoline Prices to Cost Changes. ”documented that retail gasoline prices respond more quickly

  20. Asymmetric Price Adjustment and Consumer Search: An Examination of the Retail Gasoline Industry

    E-Print Network [OSTI]

    Lewis, Matt

    2003-01-01T23:59:59.000Z

    Adjustment of U.K. Retail Gasoline Prices to Cost Changes. ”The Behavior of Retail Gasoline Prices: Symmetric or Not? ”documented that retail gasoline prices respond more quickly

  1. 2014 Across-Breed EPD Adjustment Factors Released When using EPDs, bulls from one breed cannot be compared to another unless an adjustment factor is used. Since 1993,

    E-Print Network [OSTI]

    Florida, University of

    Research Center in Clay Center, Nebraska have released adjustment factors for growth traits and maternal Tough Decisions I have heard several questions concerning 1.) Should I sell my calves at weaning?, And 2

  2. Toward Controlled Wind Farm Output: Adjustable Power Filtering

    E-Print Network [OSTI]

    Lehn, Peter W.

    wind energy is extracted by the turbine blades. CP depends on the tip-speed ratio, , defined as = Rh structure for a fully-rated converter interfaced wind turbine. A singular perturbations decomposition the static curve that describes the aerodynamic conversion of energy by the bladed turbine rotor

  3. Energy and Reliability Considerations For Adjustable Speed Driven Pumps

    E-Print Network [OSTI]

    Casada, D.

    -frictional. In fact, some fluid systems are dominated by static, rather than frictional head. When there is static head in a fluid system, the system no longer follows the same rule that head is proportional to flow rate squared. Instead, there is a constant term...

  4. Adjusting for a Factor 9.1 Study Suggestions

    E-Print Network [OSTI]

    Wardrop, Robert L.

    of replacing the women's weights with the men's weights, or vice versa, since the weights are identical the popula- tion and the response. For example, if women and men had the same distribution of drinking frequen- cies then computing the standardized rates would be a waste of time. (If men and women have

  5. The effect of degeneracy parameter on Weibel instability in dense plasma

    SciTech Connect (OSTI)

    Mahdavi, M. [Physics Department, Mazandaran University, P.O. Box 47415-416 Babolsar (Iran, Islamic Republic of)] [Physics Department, Mazandaran University, P.O. Box 47415-416 Babolsar (Iran, Islamic Republic of); Khodadadi Azadboni, F. [Physics Department, Mazandaran University, P.O. Box 47415-416 Babolsar (Iran, Islamic Republic of) [Physics Department, Mazandaran University, P.O. Box 47415-416 Babolsar (Iran, Islamic Republic of); Young Researchers Club, Sari Branch, Islamic Azad University, P.O. Box 48161-194 Sari (Iran, Islamic Republic of)

    2013-12-15T23:59:59.000Z

    In this paper, the role of degeneracy parameter, in both directions parallel and perpendicular with propagation direction of the laser beam in plasma, on the growth rate of Weibel instability, is studied. Calculations show that with the temperature anisotropy, ? = T{sub ?}/T{sub ?} = 0.2 and a 0.75 times reduction of the degeneracy parameter, the increased rate of the the Weibel instability growth rate is 72%. The degeneracy required for minimal growth rate in interaction laser plasma with a density of 1.2 × 10{sup 32}m{sup ?3}, is larger than 3. The reduction of temperature and the degeneracy parameter of plasma in parallel direction will also increase growth rate about 30% more than incrossing degeneracy parameter in transverse direction. With the minimum pressure costs of cold compression, subsequent degeneracy parameters, and the minimum value of electron quiver energy, we can expect growth rate of Weibel instability order 0.01.

  6. Assessment of net lost revenue adjustment mechanisms for utility DSM programs

    SciTech Connect (OSTI)

    Baxter, L.W.

    1995-01-01T23:59:59.000Z

    Utility shareholders can lose money on demand-side management (DSM) investments between rate cases. Several industry analysts argue that the revenues lost from utility DSM programs are an important financial disincentive to utility DSM investment. A key utility regulatory reform undertaken since 1989 allows utilities to recover the lost revenues incurred through successful operation of DSM programs. Explicitly defined net lost revenue adjustment (NLRA) mechanisms are states` preferred approach to lost revenue recovery from DSM programs. This report examines the experiences states and utilities are having with the NLRA approach. The report has three objectives. First, we determine whether NLRA is a feasible and successful approach to removing the lost-revenue disincentive to utility operation of DSM programs. Second, we identify the conditions linked to successful implementation of NLRA mechanisms in different states and assess whether NLRA has changed utility investment behavior. Third, we suggest improvements to NLRA mechanisms. We first identify states with NLRA mechanisms where utilities are recovering lost revenues from DSM programs. We interview staff at regulatory agencies in all these states and utility staff in four states. These interviews focus on the status of NLRA, implementation issues, DSM measurement issues, and NLRA results. We also analyze regulatory agency orders on NLRA, as well as associated testimony, reports, and utility lost revenue recovery filings. Finally, we use qualitative and quantitative indicators to assess NLRA`s effectiveness. Contrary to the concerns raised by some industry analysts, our results indicate NLRA is a feasible approach to the lost-revenue disincentive.

  7. Optimal transition from coal to gas and renewable power under capacity constraints and adjustment costs

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Optimal transition from coal to gas and renewable power under capacity constraints and adjustment existing coal power plants to gas and renewable power under a carbon budget. It solves a model of polluting, exhaustible resources with capacity constraints and adjustment costs (to build coal, gas, and renewable power

  8. Ergonomics Self-Evaluation: Computer Workstation Step 1: Adjust the Chair

    E-Print Network [OSTI]

    Johnston, Daniel

    Ergonomics Self-Evaluation: Computer Workstation Step 1: Adjust the Chair a. Seat height ­ Adjust medical condition or ergonomic concern, contact the UT at Austin Occupational Health Program at 512.471.4OHP(4647). http://www.utexas.edu/hr/current/services/ohp.html Ergonomic evaluation services

  9. Emerging Furniture Design Challenges and Product Development -Plus-size Furniture and Adjustable Furniture

    E-Print Network [OSTI]

    Emerging Furniture Design Challenges and Product Development - Plus-size Furniture and Adjustable population, · Furniture with reduced environmental impact, · Furniture lifecycle and end-of-life disposal of Problem: Adjustable furniture is a high-end product which provides customers more options to increase

  10. Cyclical adjustment, capital-labor substitution and total factor productivity convergence East Germany after unification

    E-Print Network [OSTI]

    Pfeifer, Holger

    Cyclical adjustment, capital-labor substitution and total factor productivity convergence ­ East integration and massive help from the Federal Government East German productivity catching up faded out in the nineties. This paper presents panel-data estimates of the productivity adjustment based on a production

  11. A Bayesian method for linear, inequality-constrained adjustment and its application to GPS positioning

    E-Print Network [OSTI]

    Santerre, Rock

    A Bayesian method for linear, inequality-constrained adjustment and its application to GPS 2005 Abstract. One of the typical approaches to linear, inequality-constrained adjustment (LICA be improved significantly and the new approach is feasible. Key words: Linear, inequality-constrained

  12. Section 1 (For Expenditure Adjustments) EXPENDITURES FOR BUSINESS BUDGET BUDGET BUDGET BUDGET OFFICE USE

    E-Print Network [OSTI]

    Tennessee, University of

    DATE Section 1 (For Expenditure Adjustments) EXPENDITURES FOR BUSINESS BUDGET BUDGET BUDGET BUDGET AMOUNT AMOUNT AMOUNT CODE TOTAL FOR BUSINESS Section 2 (For Revenue and Other Adjustments) BUDGET BUDGET/Chief Administrative Officer Department Head Chief Business Officer Dean or Director Vice President for Budget

  13. EAKF-CMAQ : introduction and evaluation of a data assimilation for CMAQ based on the ensemble adjustment Kalman filter.

    SciTech Connect (OSTI)

    Zubrow, A.; Chen, L.; Kotamarthi, V. R.; Environmental Science Division; Univ. of North Carolina; Univ. of Chicago

    2008-05-10T23:59:59.000Z

    A new approach is presented for data assimilation using the ensemble adjustment Kalman filter (EAKF) technique for surface measurements of carbon monoxide in a single tracer version of the community air quality model. An implementation of the EAKF known as the Data Assimilation Research Testbed at the National Center for Atmospheric Research was used for developing the model. Three different sets of numerical experiments were performed to test the effectiveness of the procedure and the range of key parameters used in implementing the procedure. The model domain includes much of the northeastern United States. The first two numerical experiments use idealized measurements derived from defined model runs, and the last test uses measurements of carbon monoxide from approximately 220 Air Quality System monitoring sites over the northeastern United States, maintained by the U.S. Environmental Protection Agency. In each case, the proposed method provided better results than the method without data assimilation.

  14. A computer-controlled, adjustable-volume Helmholtz resonator

    E-Print Network [OSTI]

    Hintz, Curtis William

    1984-01-01T23:59:59.000Z

    the vibrating body oscillates back and forth, hence the rate at which the compressions and rarefactions are pro- duced, defines the frequency of a wave. The frequency is normally measured in units called Hertz (Hz), where one Hertz is equal to one cycle per... Movable Cylinder Figure 8. Dia agram of Adgustab a le Resonator . ee gJ , )~' r 22 source (Figure 9) ~ One consideration in choosing the three fre- quencies was that they be relatively low frequency (& 1000 Hz ) so that the resonator dimensions did...

  15. Rate Schedule CPP-2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CPP-2 (Supersedes Schedule CPP-1) UNITED STATES DEPARTMENT OF ENERGY WESTERN AREA POWER ADMINISTRATION CENTRAL VALLEY PROJECT SCHEDULE OF RATES FOR CUSTOM PRODUCT POWER Effective:...

  16. LCC Guidance Rates

    Broader source: Energy.gov [DOE]

    Notepad text file provides the LCC guidance rates in a numbered format for the various regions throughout the U.S.

  17. Effective Rate Period

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    charges or credits associated with the creation, termination, or modification to any tariff, contract, or rate schedule accepted or approved by the Federal Energy Regulatory...

  18. Residential Solar Valuation Rates

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Residential Solar Valuation Rates Karl R. Rbago Rbago Energy LLC 1 The Ideal Residential Solar Tariff Fair to the utility and non-solar customers Fair compensation to...

  19. Power Rate Cases (pbl/rates)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible forPortsmouth/Paducah Project OfficePower Electronics Power Electronics PowerPowerRates

  20. Power Rates Announcements (pbl/rates)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible forPortsmouth/Paducah Project OfficePower Electronics Power Electronics PowerPowerRates

  1. Psychological Characteristics and Adjustment in Caregivers of Children with Severe Neurodisability with Chronic Pulmunary Symptoms

    E-Print Network [OSTI]

    Blucker, Ryan Thomas

    2011-08-08T23:59:59.000Z

    -reported experiences related to general health and psychological adjustment. It was hypothesized that this specific group of caregivers would report relatively high levels of distress related to disability severity and resulting respiratory care management plan...

  2. Is the hourly data I get from NREL's PV Watts program adjusted...

    Open Energy Info (EERE)

    get from NREL's PV Watts program adjusted for daylight savings time. Home I take the hourly AC output numbers and apply them to a program I built that assigns a dollar value to the...

  3. E-Print Network 3.0 - adjusted d-dimer cut-off Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    44 Study of the Response Function of the CUORE Bolometers towards a Neutrinoless Double Beta Decay Summary: sampling and cut-off frequency for each bolometer and adjust them...

  4. 31.01.01.V1.05 SALARY ADJUSTMENTS FOR INTERNATIONAL ASSIGNMENTS

    E-Print Network [OSTI]

    administered by the employee, or other measure of increased responsibility resulting from the assignment. 1 associated with a change in position. 2.00 GUIDELINES AND PROCEDURES 2.01 All salary adjustments

  5. Assessment of Dancoff adjusted Wigner-Seitz cells for self-shielding LWR lattices

    E-Print Network [OSTI]

    Roomy, Thomas Hayward

    2012-01-01T23:59:59.000Z

    The objective of this thesis was to assess the effectiveness of using a Wigner-Seitz (WS) cell with an adjusted moderator thickness to produce more accurate resonance self-shielded cross sections for light water reactor ...

  6. The relation between family functioning and psychological adjustment in children with asthma and children with diabetes

    E-Print Network [OSTI]

    Fontaine, Eve Nicole

    2007-04-25T23:59:59.000Z

    The goals of this study were to evaluate the relationships among family functioning, psychological adjustment, and health-related quality of life in children with asthma and children with diabetes. A secondary goal of this study was to examine...

  7. Design of an adjustable arm-supported table that is counterbalanced against gravity

    E-Print Network [OSTI]

    Olle, Chase R

    2013-01-01T23:59:59.000Z

    A prototype system was designed and constructed that used a wall-mounted, counterbalanced mechanical arm to support a workspace that can be adjusted for position. Possible applications of the system include use as a writing ...

  8. Power Compensation Effect of an Adjustable-Speed Rotary Condenser with a Flywheel for a Large Capacity Magnet Power Supply

    E-Print Network [OSTI]

    Akagi, H

    1999-01-01T23:59:59.000Z

    Power Compensation Effect of an Adjustable-Speed Rotary Condenser with a Flywheel for a Large Capacity Magnet Power Supply

  9. 2010FirmRateAdj

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2015 Firm Power Rates & Rate Schedules The Pick-Sloan Missouri Basin Program--Eastern Division: Firm Electric Service Pick Sloan Missouri River -Eastern Division Rates Effective...

  10. Parameter Control Methods for Selection Operators in Genetic Algorithms

    E-Print Network [OSTI]

    Eiben, A.E. "Guszti"

    of such methods on three groups of test functions and conclude that varying se- lection pressure during a GA run largely on their parameters, such as population size, selection pressure, crossover and mutation rates size determines the selection pressure, and can thus be used to control the selection operator [11

  11. Uncertainty-based Estimation of the Secure Range for ISO New England Dynamic Interchange Adjustment

    SciTech Connect (OSTI)

    Etingov, Pavel V.; Makarov, Yuri V.; Wu, Di; Hou, Zhangshuan; Sun, Yannan; Maslennikov, S.; Luo, Xiaochuan; Zheng, T.; George, S.; Knowland, T.; Litvinov, E.; Weaver, S.; Sanchez, E.

    2014-04-14T23:59:59.000Z

    The paper proposes an approach to estimate the secure range for dynamic interchange adjustment, which assists system operators in scheduling the interchange with neighboring control areas. Uncertainties associated with various sources are incorporated. The proposed method is implemented in the dynamic interchange adjustment (DINA) tool developed by Pacific Northwest National Laboratory (PNNL) for ISO New England. Simulation results are used to validate the effectiveness of the proposed method.

  12. Denial of Service attacks: path reconstruction for IP traceback using Adjusted Probabilistic Packet Marking

    E-Print Network [OSTI]

    Dube, Raghav

    2005-02-17T23:59:59.000Z

    DENIAL OF SERVICE ATTACKS: PATH RECONSTRUCTION FOR IP TRACEBACK USING ADJUSTED PROBABILISTIC PACKET MARKING A Thesis by RAGHAV DUBE Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE December 2004 Major Subject: Electrical Engineering DENIAL OF SERVICE ATTACKS: PATH RECONSTRUCTION FOR IP TRACEBACK USING ADJUSTED PROBABILISTIC PACKET MARKING A Thesis by RAGHAV DUBE Submitted to Texas A&M University...

  13. <RatesMiscInfo>

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Rates & Repayment Services Power Reporting MISCELLANEOUS REPORTING Power Supply Report October 2014 (59kb pdf) September 2014 (58kb pdf) August 2014 (47kb pdf) July 2014 (57kb pdf)...

  14. Effective Rate Period

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Regulation and Frequency Response DollarsKW-month 4.56 CV-RFS4 Spinning Reserve The formula rate for spinning reserve service is the price consistent with the California...

  15. Effective Rate Period

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Frequency Response DollarsKW-month 3.98 4.17 CV-RFS4 Spinning Reserve The formula rate for spinning reserve service is the price consistent with the California...

  16. On Thermonuclear Reaction Rates

    E-Print Network [OSTI]

    H. J. Haubold; A. M. Mathai

    1996-12-02T23:59:59.000Z

    Nuclear reactions govern major aspects of the chemical evolution od galaxies and stars. Analytic study of the reaction rates and reaction probability integrals is attempted here. Exact expressions for the reaction rates and reaction probability integrals for nuclear reactions in the case of nonresonant, modified nonresonant, screened nonresonant and resonant cases are given. These are expressed in terms of H-functions, G-functions and in computable series forms. Computational aspects are also discussed.

  17. Electricity Journal debate: a response to Boonin's straight fixed variable ''feebate'' rate design

    SciTech Connect (OSTI)

    Parmesano, Hethie

    2009-11-15T23:59:59.000Z

    The Boonin proposal creates more problems than it solves. A rate structure with time-differentiated pricing based on marginal cost, with a more traditional decoupling mechanism and a fuel and purchased power adjustment, does a much better job of decoupling and achieving ratemaking objectives of revenue adequacy, efficiency, equity, price transparency, and administrative feasibility. (author)

  18. The instantaneous radial growth rate of stellar discs

    E-Print Network [OSTI]

    Pezzulli, Gabriele; Boissier, Samuel; Muñoz-Mateos, Juan Carlos

    2015-01-01T23:59:59.000Z

    We present a new and simple method to measure the instantaneous mass and radial growth rates of the stellar discs of spiral galaxies, based on their star formation rate surface density (SFRD) profiles. Under the hypothesis that discs are exponential with time-varying scalelengths, we derive a universal theoretical profile for the SFRD, with a linear dependence on two parameters: the specific mass growth rate $\

  19. A PARAMETER STUDY FOR BAROCLINIC VORTEX AMPLIFICATION

    SciTech Connect (OSTI)

    Raettig, Natalie; Klahr, Hubert [Max-Planck-Institut fuer Astronomie, Koenigstuhl 17, D-69117 Heidelberg (Germany); Lyra, Wladimir, E-mail: raettig@mpia.de, E-mail: klahr@mpia.de, E-mail: Wladimir.Lyra@jpl.nasa.gov [Department of Astrophysics, American Museum of Natural History, 79th Street at Central Park West, New York, NY 10024 (United States)

    2013-03-10T23:59:59.000Z

    Recent studies have shown that baroclinic vortex amplification is strongly dependent on certain factors, namely, the global entropy gradient, the efficiency of thermal diffusion and/or relaxation as well as numerical resolution. We conduct a comprehensive study of a broad range and combination of various entropy gradients, thermal diffusion and thermal relaxation timescales via local shearing sheet simulations covering the parameter space relevant for protoplanetary disks. We measure the Reynolds stresses as a function of our control parameters and see that there is angular momentum transport even for entropy gradients as low as {beta} = -dln s/dln r = 1/2. Values we expect in protoplanetary disks are between {beta} = 0.5-2.0 The amplification-rate of the perturbations, {Gamma}, appears to be proportional to {beta}{sup 2} and thus proportional to the square of the Brunt-Vaeisaelae frequency ({Gamma}{proportional_to}{beta}{sup 2}{proportional_to}N {sup 2}). The saturation level of Reynolds stresses, on the other hand, seems to be proportional to {beta}{sup 1/2}. This highlights the importance of baroclinic effects even for the low entropy gradients expected in protoplanetary disks.

  20. Criticality parameters for tank waste evaluation

    SciTech Connect (OSTI)

    Rogers, C.A.

    1997-05-19T23:59:59.000Z

    Nuclear criticality parameters were developed as a basis for evaluating criticality safety for waste stored in the high-level waste tank farms on the Hanford Site in Washington State. The plutonium critical concentration and critical mass were calculated using a conservative waste model (CWM). The primary requirement of a CWM is that it have a lower neutron absorption than any actual waste. Graphs are provided of the critical mass as a function of plutonium concentration for spheres and for uniform slab layers in a 22.9-m-diameter tank. Minimum subcritical absorber-to-plutonium mass rates were calculated for waste components selected for their relative abundance and neutron absorption capacity. Comparison of measured absorber-to-plutonium mass ratios in their corresponding subcritical limit mass ratios provides a means of assessing whether criticality is possible for waste of the measured composition. A comparison is made between the plutonium critical concentrations in CWM solids and in a postulated real waste. This comparison shows that the actual critical parameters are likely to be significantly larger than those obtained using the CWM, thus providing confidence that the margin of safety obtained to the criticality safety evaluation is conservative.

  1. The effects of user mobility on usage parameter control (UPC) in wireless ATM systems

    SciTech Connect (OSTI)

    Sholander, P.; Martinez, L.; Tolendino, L. [Sandia National Labs., Albuquerque, NM (United States); Mah, B.A. [Sandia National Labs., Livermore, CA (United States)

    1997-07-01T23:59:59.000Z

    Wireless Asynchronous Transfer Mode (WATM) networks pose new traffic management problems. One example is the effect of user mobility on Usage Parameter Control (UPC). If the UPC algorithm resets after each handoff between wireless-cells, then users can cheat on their traffic contract. This paper derives explicit relationships between a user`s traffic parameters (Peak Cell Rate, Sustained Cell Rate and Maximum Burst Size), their transit time per wireless-cell, their maximum sustained cheating-rate and the Generic Cell Rate Algorithm`s (GCRA`s) Limit (L) parameter. It also shows that the GCRA can still effectively police Constant Bit Rate (CBR) traffic, but not some types of realistic Variable Bit Rate (VBR) traffic.

  2. Statistical Methods for Thermonuclear Reaction Rates and Nucleosynthesis Simulations

    E-Print Network [OSTI]

    Iliadis, Christian; Coc, Alain; Timmes, F X; Champagne, Art E

    2014-01-01T23:59:59.000Z

    Rigorous statistical methods for estimating thermonuclear reaction rates and nucleosynthesis are becoming increasingly established in nuclear astrophysics. The main challenge being faced is that experimental reaction rates are highly complex quantities derived from a multitude of different measured nuclear parameters (e.g., astrophysical S-factors, resonance energies and strengths, particle and gamma-ray partial widths). We discuss the application of the Monte Carlo method to two distinct, but related, questions. First, given a set of measured nuclear parameters, how can one best estimate the resulting thermonuclear reaction rates and associated uncertainties? Second, given a set of appropriate reaction rates, how can one best estimate the abundances from nucleosynthesis (i.e., reaction network) calculations? The techniques described here provide probability density functions that can be used to derive statistically meaningful reaction rates and final abundances for any desired coverage probability. Examples ...

  3. Rotational rate sensor

    DOE Patents [OSTI]

    Hunter, Steven L. (Livermore, CA)

    2002-01-01T23:59:59.000Z

    A rate sensor for angular/rotational acceleration includes a housing defining a fluid cavity essentially completely filled with an electrolyte fluid. Within the housing, such as a toroid, ions in the fluid are swept during movement from an excitation electrode toward one of two output electrodes to provide a signal for directional rotation. One or more ground electrodes within the housing serve to neutralize ions, thus preventing any effect at the other output electrode.

  4. Previous Power Rates

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible forPortsmouth/Paducah ProjectPRE-AWARDenergyEnergy InnovationRecentPreviouspower-rates

  5. Previous Transmission Rates

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible forPortsmouth/Paducah ProjectPRE-AWARDenergyEnergytransmission-rates Sign In About |

  6. Effect of Rail Rate Deregulation: The Case of Wheat Exports from the South Plains.

    E-Print Network [OSTI]

    Fuller, Stephen; Shanmugham, C. V.

    1982-01-01T23:59:59.000Z

    I line-haul railroads. The railroad freight rate index, constructed by the Bureau of Labor Statistics, was used to update estimated rail cost parameters to 1977. To facilitate the estimation of the variable cost parameters, a rail cost algorithm... Country Elevator, Inland Terminal, and Port Terminal Costs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Commercial Truck Transportation Rates . . . . . . . . . . . . . . . . . . . . . . 7 Barge...

  7. Parameter 4 | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup |JilinLuOpenNorthOlympiaAnalysis) JumpPalcan sPaquin Energy andParameter

  8. Current Power Rates

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power Administration would likeConstitution4 Department ofDepartmentPower-Rates Sign In About |

  9. Current Transmission Rates

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power Administration would likeConstitution4 Department ofDepartmentPower-Rates Sign

  10. [FIXED RATE GUARANTEED OBLIGATIONS]

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof Energy 2, 2015Visiting Strong,Women @JoinEnergy ZEROFIXED RATE GUARANTEED

  11. Settlement PF Exchange Rates

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our Instagram Secretary Moniz9 SeptemberSetting the Stage for the Next SolarRate

  12. Modeling Credit Value Adjustment With Downgrade-Triggered Termination Clause Using A Ruin Theoretic Approach

    E-Print Network [OSTI]

    Feng, Runhuan

    . At the heart of the valuation of credit risk adjustment(CVA) is the computation of the probability of default, Laplace transform inversion, finite- time ruin probability. 1 Introduction The recent financial crisis limit. Nevertheless, numerous examples from the 2007 crisis have shown that even the high profile

  13. Reinforcement Learning to Adjust Robot Movements to New Situations MPI Tbingen, Germany

    E-Print Network [OSTI]

    , namely a kernelized version of the reward-weighted regres- sion. We show two robot applications and Peters, 2010], and even in tasks with potential industrial applications [Urbanek et al., 2004Reinforcement Learning to Adjust Robot Movements to New Situations Jens Kober MPI Tübingen, Germany

  14. Z .Global and Planetary Change 20 1999 93123 Global sea level rise and glacial isostatic adjustment

    E-Print Network [OSTI]

    Peltier, W. Richard

    adjustment W.R. Peltier ) Department of Physics, UniÕersity of Toronto, 60 St. George Street, Toronto-mail: peltier@atmosp.physics.utoronto.ca Z .rather recently Peltier and Tushingham, 1989 , it was not clearly;( )W.R. PeltierrGlobal and Planetary Change 20 1999 93­12394 Z .existed at that time e.g., Peltier

  15. JOURNAL OF GEOPHYSICAL RESEARCH, VOL. ???, XXXX, DOI:10.1029/, Altitude-Adjusted Corrected Geomagnetic Coordinates

    E-Print Network [OSTI]

    Shepherd, Simon

    ]; and satellite measurements of particles and electric currents to determine magnetospheric boundaries and large Geomagnetic Coordinates: Definition and Functional Approximations S. G. Shepherd Thayer School of Engineering to transform between geo- graphic and Altitude-Adjusted Corrected Geomagnetic (AACGM) coordinates reveals

  16. A Nonparametric Matching Method for Covariate Adjustment with Application to Economic Evaluation

    E-Print Network [OSTI]

    Sekhon, Jasjeet S.

    A Nonparametric Matching Method for Covariate Adjustment with Application to Economic Evaluation of propensity score and Mahalanobis distance matching. We apply Genetic Matching to an economic evaluation and nonparametric methods; observational stud- ies; health economic evaluation #12;1 Introduction Progress has been

  17. Faraday cup with nanosecond response and adjustable impedance for fast electron beam characterization

    SciTech Connect (OSTI)

    Hu Jing; Rovey, Joshua L. [Missouri University of Science and Technology (Formerly University of Missouri-Rolla), Rolla, Missouri 65409 (United States)

    2011-07-15T23:59:59.000Z

    A movable Faraday cup design with simple structure and adjustable impedance is described in this work. This Faraday cup has external adjustable shunt resistance for self-biased measurement setup and 50 {Omega} characteristic impedance to match with 50 {Omega} standard BNC coaxial cable and vacuum feedthroughs for nanosecond-level pulse signal measurements. Adjustable shunt resistance allows self-biased measurements to be quickly acquired to determine the electron energy distribution function. The performance of the Faraday cup is validated by tests of response time and amplitude of output signal. When compared with a reference source, the percent difference of the Faraday cup signal fall time is less than 10% for fall times greater than 10 ns. The percent difference of the Faraday cup signal pulse width is below 6.7% for pulse widths greater than 10 ns. A pseudospark-generated electron beam is used to compare the amplitude of the Faraday cup signal with a calibrated F-70 commercial current transformer. The error of the Faraday cup output amplitude is below 10% for the 4-14 kV tested pseudospark voltages. The main benefit of this Faraday cup is demonstrated by adjusting the external shunt resistance and performing the self-biased method for obtaining the electron energy distribution function. Results from a 4 kV pseudospark discharge indicate a ''double-humped'' energy distribution.

  18. Economics Department Working Paper Series Border Carbon Adjustments and the Potential for

    E-Print Network [OSTI]

    Sussex, University of

    in major emerging economies ­ especially India and China ­ with consequent carbon leakage2 . UnderEconomics Department Working Paper Series No. 6-2010 Border Carbon Adjustments and the Potential.holmes@sussex.ac.uk j.rollo@sussex.ac.uk Abstract: Balancing legitimate fears that carbon leakage could undermine

  19. Consumption-Based Adjustment of China's Emissions-Intensity Targets: An

    E-Print Network [OSTI]

    China's Twelfth Five-Year Plan (2011­2015) aims to achieve a national carbon intensity reduction of 17's provinces is complicated by the fact that more than half of China's national carbon emissions are embodiedConsumption-Based Adjustment of China's Emissions-Intensity Targets: An Analysis of its Potential

  20. Generalized 3-D Tolerance Analysis of Mechanical Assemblies with Small Kinematic Adjustments

    E-Print Network [OSTI]

    ) for tolerance analysis of 3-D mechanical assemblies is presented. Vector assembly models are used, based on 3-D. Tolerance analysis procedures are formulated for both open and closed loop assembly models. The method generalizes assembly variation models to include small kinematic adjustments between mating parts. Open vector

  1. Life-Add: Lifetime Adjustable Design for WiFi Networks with Heterogeneous Energy Supplies

    E-Print Network [OSTI]

    Sinha, Prasun

    Life-Add: Lifetime Adjustable Design for WiFi Networks with Heterogeneous Energy Supplies Shengbo Chen§, Tarun Bansal§, Yin Sun§, Prasun Sinha and Ness B. Shroff Department of ECE, The Ohio State University Department of CSE, The Ohio State University Email: {chens,shroff}@ece.osu.edu, {bansal,prasun}@cse.ohio

  2. A uniform price auction with locational price adjustments for competitive electricity markets

    E-Print Network [OSTI]

    b School of Electrical Engineering, Phillips Hall, Cornell University, Ithaca, NY 14853, USA cA uniform price auction with locational price adjustments for competitive electricity markets of Agricultural, Resource and Managerial Economics (ARME), Warren Hall, Cornell University, Ithaca, NY 14853, USA

  3. ADJUSTING TO NATURAL DISASTERS Smith, V., Carbone, J., Hallstrom, D., Pope, J. & Darden, M.

    E-Print Network [OSTI]

    Wang, Hai

    the largest U.S. natural disaster on record, Hurricane Andrew, to evaluate how people and housing markets Hurricane Andrew, the largest U.S. natural disaster on record, to investigate two questions.1 We first most of the differences in demographic groups' patterns of adjustment to the hurricane damage. Low

  4. Hydraulic adjustment of Scots pine across Europe J. Martnez-Vilalta1,2

    E-Print Network [OSTI]

    Mencuccini, Maurizio

    Research Hydraulic adjustment of Scots pine across Europe J. Martínez-Vilalta1,2 , H. Cochard3), 8903 Birmensdorf, Switzerland Summary · The variability of branch-level hydraulic properties, xylem anatomy, sapwood- and leaf-specific hydraulic conductivity (KS and KL), vulnerability to embolism

  5. Adjusting for selection bias in Web surveys using propensity scores: the case of the Health

    E-Print Network [OSTI]

    Schonlau, Matt

    Adjusting for selection bias in Web surveys using propensity scores: the case of the Health at the Joint Statistical Meetings, Toronto, August 2004. Abstract Many web surveys allow respondents to self as supplementary information about which subset of HRS respondents also responded to an additional web survey (web

  6. Development of the Flux-Adjusting Surface Data Assimilation System for Mesoscale Models

    E-Print Network [OSTI]

    Niyogi, Dev

    Development of the Flux-Adjusting Surface Data Assimilation System for Mesoscale Models KIRAN and temperature and for surface air temperature and water vapor mixing ratio for mesoscale models. In the FASDAS-field variables. The FASDAS is coupled to a land surface submodel in a three-dimensional mesoscale model and tests

  7. The Adjustable Grid: A Grid-Based Cursor Control Solution using Speech Recognition

    E-Print Network [OSTI]

    Gray, Jeffrey G.

    The Adjustable Grid: A Grid-Based Cursor Control Solution using Speech Recognition Tarif Haque1 of grid-based cursor control systems using speech recognition have been developed. These systems typically overlay a numbered 3x3 grid on the screen and allow the user to recursively drill the cursor down

  8. The Different Characteristics of Aquifer Parameters and Their Implications on Pumping-Test Analysis

    E-Print Network [OSTI]

    Jiao, Jiu Jimmy

    The Different Characteristics of Aquifer Parameters and Their Implications on Pumping-Test Analysis and storativity, under constant-rate pumping conditions. A two-way coordinate is such that the conditions implications on pumping-test designs and interpretation. For example, to estimate the parameters

  9. STELLAR ENCOUNTER RATE IN GALACTIC GLOBULAR CLUSTERS

    SciTech Connect (OSTI)

    Bahramian, Arash; Heinke, Craig O.; Sivakoff, Gregory R.; Gladstone, Jeanette C., E-mail: bahramia@ualberta.ca [Department of Physics, University of Alberta, CCIS 4-183, Edmonton, AB, T5K 1V4 (Canada)

    2013-04-01T23:59:59.000Z

    The high stellar densities in the cores of globular clusters cause significant stellar interactions. These stellar interactions can produce close binary mass-transferring systems involving compact objects and their progeny, such as X-ray binaries and radio millisecond pulsars. Comparing the numbers of these systems and interaction rates in different clusters drives our understanding of how cluster parameters affect the production of close binaries. In this paper we estimate stellar encounter rates ({Gamma}) for 124 Galactic globular clusters based on observational data as opposed to the methods previously employed, which assumed 'King-model' profiles for all clusters. By deprojecting cluster surface brightness profiles to estimate luminosity density profiles, we treat 'King-model' and 'core-collapsed' clusters in the same way. In addition, we use Monte Carlo simulations to investigate the effects of uncertainties in various observational parameters (distance, reddening, surface brightness) on {Gamma}, producing the first catalog of globular cluster stellar encounter rates with estimated errors. Comparing our results with published observations of likely products of stellar interactions (numbers of X-ray binaries, numbers of radio millisecond pulsars, and {gamma}-ray luminosity) we find both clear correlations and some differences with published results.

  10. Measuring neutrino oscillation parameters using $\

    SciTech Connect (OSTI)

    Backhouse, Christopher James; /Oxford U.

    2011-02-01T23:59:59.000Z

    MINOS is a long-baseline neutrino oscillation experiment. It consists of two large steel-scintillator tracking calorimeters. The near detector is situated at Fermilab, close to the production point of the NuMI muon-neutrino beam. The far detector is 735 km away, 716m underground in the Soudan mine, Northern Minnesota. The primary purpose of the MINOS experiment is to make precise measurements of the 'atmospheric' neutrino oscillation parameters ({Delta}m{sub atm}{sup 2} and sin{sup 2} 2{theta}{sub atm}). The oscillation signal consists of an energy-dependent deficit of {nu}{sub {mu}} interactions in the far detector. The near detector is used to characterize the properties of the beam before oscillations develop. The two-detector design allows many potential sources of systematic error in the far detector to be mitigated by the near detector observations. This thesis describes the details of the {nu}{sub {mu}}-disappearance analysis, and presents a new technique to estimate the hadronic energy of neutrino interactions. This estimator achieves a significant improvement in the energy resolution of the neutrino spectrum, and in the sensitivity of the neutrino oscillation fit. The systematic uncertainty on the hadronic energy scale was re-evaluated and found to be comparable to that of the energy estimator previously in use. The best-fit oscillation parameters of the {nu}{sub {mu}}-disappearance analysis, incorporating this new estimator were: {Delta}m{sup 2} = 2.32{sub -0.08}{sup +0.12} x 10{sup -3} eV{sup 2}, sin {sup 2} 2{theta} > 0.90 (90% C.L.). A similar analysis, using data from a period of running where the NuMI beam was operated in a configuration producing a predominantly {bar {nu}}{sub {mu}} beam, yielded somewhat different best-fit parameters {Delta}{bar m}{sup 2} = (3.36{sub -0.40}{sup +0.46}(stat.) {+-} 0.06(syst.)) x 10{sup -3}eV{sup 2}, sin{sup 2} 2{bar {theta}} = 0.86{sub -0.12}{sup _0.11}(stat.) {+-} 0.01(syst.). The tension between these results is intriguing, and additional antineutrino data is currently being taken in order to further investigate this apparent discrepancy.

  11. Energy Management Through Innovative Rates

    E-Print Network [OSTI]

    Williams, M. L.

    1982-01-01T23:59:59.000Z

    of energy efficiency in the industrial sector and specific rate design alternatives for doing so....

  12. Embedding parameters in ab initio theory to develop well-controlled approximations based on molecular similarity

    E-Print Network [OSTI]

    Tanha, Matteus; Cappiello, Alex; Gordon, Geoffrey J; Yaron, David J

    2013-01-01T23:59:59.000Z

    A means to take advantage of molecular similarity to lower the computational cost of electronic structure theory is proposed, in which parameters are embedded into a low-cost, low-level (LL) ab initio theory and adjusted to obtain agreement with a higher level (HL) ab initio theory. This approach is explored by training such a model on data for ethane and testing the resulting model on methane, propane and butane. The electronic distribution of the molecules is varied by placing them in strong electrostatic environments consisting of random charges placed on the corners of a cube. The results find that parameters embedded in HF/STO-3G theory can be adjusted to obtain agreement, to within about 2 kcal/mol, with results of HF/6-31G theory. Obtaining this level of agreement requires the use of parameters that are functions of the bond lengths, atomic charges, and bond orders within the molecules. The argument is made that this approach provides a well-controlled means to take advantage of molecular similarity in...

  13. System and method for motor parameter estimation

    DOE Patents [OSTI]

    Luhrs, Bin; Yan, Ting

    2014-03-18T23:59:59.000Z

    A system and method for determining unknown values of certain motor parameters includes a motor input device connectable to an electric motor having associated therewith values for known motor parameters and an unknown value of at least one motor parameter. The motor input device includes a processing unit that receives a first input from the electric motor comprising values for the known motor parameters for the electric motor and receive a second input comprising motor data on a plurality of reference motors, including values for motor parameters corresponding to the known motor parameters of the electric motor and values for motor parameters corresponding to the at least one unknown motor parameter value of the electric motor. The processor determines the unknown value of the at least one motor parameter from the first input and the second input and determines a motor management strategy for the electric motor based thereon.

  14. Composition and Flow Behavior of F-Canyon Tank 804 Sludge following Manganese Addition and pH Adjustment

    SciTech Connect (OSTI)

    Poirier, M. R.; Stallings, M. E.; Burket, P.R.; Fink, S. D.

    2005-11-30T23:59:59.000Z

    The Site Deactivation and Decommissioning (SDD) Organization is evaluating options to disposition the 800 underground tanks (including removal of the sludge heels from these tanks). To support this effort, SDD requested assistance from Savannah River National Laboratory (SRNL) personnel to examine the composition and flow characteristics of the Tank 804 sludge slurry after diluting it 10:1 with water, adding manganese nitrate to produce a slurry containing 5.5 wt % manganese (40:1 ratio of Mn:Pu), and adding sufficient 8 M caustic to raise the pH to 7, 10, and 14. Researchers prepared slurries containing one part Tank 804 sludge and 10 parts water. The water contained 5.5 wt % manganese (which SDD will add to poison the plutonium in Tank 804) and was pH adjusted to 3, 7, 10, or 14. They hand mixed (i.e., shook) these slurries and allowed them to sit overnight. With the pH 3, 7, and 10 slurries, much of the sludge remained stuck to the container wall. With the pH 14 slurry, most of the sludge appeared to be suspended in the slurry. They collected samples from the top and bottom of each container, which were analyzed for plutonium, manganese, and organic constituents. Following sampling, they placed the remaining material into a viscometer and measured the relationship between applied shear stress and shear rate. The pH 14 slurry was placed in a spiral ''race track'' apparatus and allowed to gravity drain.

  15. Integrated loading rate determination for wastewater infiltration system sizing

    SciTech Connect (OSTI)

    Jenssen, P.D. (Norges Landbrukshoegskole, Aas (Norway). Centre for Soil and Environmental Research); Siegrist, R.L. (Oak Ridge National Lab., TN (United States))

    1991-01-01T23:59:59.000Z

    One of the principal parameters used in wastewater system design is the hydraulic loading rate. Historically the determination of the loading rate has been a straight forward process involving selection of a rate based on soil texture or water percolation rate. Research and experience over the past decade has provided additional insight into the complex processes occurring within wastewater-amended soil systems and has suggested the fallacy of this approach. A mean grain size vs. sorting (MESO) diagram constitutes a new basis for soil classification for wastewater infiltration system design. Crude characterization of the soil hydraulic properties is possible according to the MESO Diagram and loading rate as well as certain purification aspects can be assessed from the diagram. In this paper, an approach is described based on the MESO Diagram that integrates soil properties and wastewater pretreatment to yield a loading rate. 53 refs., 3 figs., 2 tabs.

  16. DIRECT EXTRUSION OF RATE-SENSITIVE MATERIALS THROUGH CONICAL DIES

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    frottements sont du type Coulomb. Les expériences de filage menées sur l'alliage super- plastique PbSn à la to the constitutive equation : 03C3e = 03C30 sin h-1(03B5e/03B50) and die friction is assumed to be of the Coulomb Strain-rate sensitivity index. Eo Strain-rate constant in material law. 6o Material parameter in material

  17. Fermentation process using specific oxygen uptake rates as a process control

    DOE Patents [OSTI]

    Van Hoek, Pim; Aristidou, Aristos; Rush, Brian

    2014-09-09T23:59:59.000Z

    Specific oxygen uptake (OUR) is used as a process control parameter in fermentation processes. OUR is determined during at least the production phase of a fermentation process, and process parameters are adjusted to maintain the OUR within desired ranges. The invention is particularly applicable when the fermentation is conducted using a microorganism having a natural PDC pathway that has been disrupted so that it no longer functions. Microorganisms of this sort often produce poorly under strictly anaerobic conditions. Microaeration controlled by monitoring OUR allows the performance of the microorganism to be optimized.

  18. Fermentation process using specific oxygen uptake rates as a process control

    DOE Patents [OSTI]

    Van Hoek; Pim (Minnetonka, MN), Aristidou; Aristos (Maple Grove, MN), Rush; Brian (Minneapolis, MN)

    2007-06-19T23:59:59.000Z

    Specific oxygen uptake (OUR) is used as a process control parameter in fermentation processes. OUR is determined during at least the production phase of a fermentation process, and process parameters are adjusted to maintain the OUR within desired ranges. The invention is particularly applicable when the fermentation is conducted using a microorganism having a natural PDC pathway that has been disrupted so that it no longer functions. Microorganisms of this sort often produce poorly under strictly anaerobic conditions. Microaeration controlled by monitoring OUR allows the performance of the microorganism to be optimized.

  19. Fermentation process using specific oxygen uptake rates as a process control

    DOE Patents [OSTI]

    Van Hoek, Pim (Minnetonka, MN); Aristidou, Aristos (Maple Grove, MN); Rush, Brian (Minneapolis, MN)

    2011-05-10T23:59:59.000Z

    Specific oxygen uptake (OUR) is used as a process control parameter in fermentation processes. OUR is determined during at least the production phase of a fermentation process, and process parameters are adjusted to maintain the OUR within desired ranges. The invention is particularly applicable when the fermentation is conducted using a microorganism having a natural PDC pathway that has been disrupted so that it no longer functions. Microorganisms of this sort often produce poorly under strictly anaerobic conditions. Microaeration controlled by monitoring OUR allows the performance of the microorganism to be optimized.

  20. Adjustment of the Remote Tropical Climate to El Nio Conditions BENJAMIN R. LINTNER* AND JOHN C. H. CHIANG

    E-Print Network [OSTI]

    Lintner, Benjamin Richard

    convective heating anomalies that in turn cause remote tropical changes through a suite of tele- connectedAdjustment of the Remote Tropical Climate to El Niño Conditions BENJAMIN R. LINTNER* AND JOHN C. H) ABSTRACT The adjustment of the tropical climate outside the Pacific (the "remote Tropics") to the abrupt

  1. PowerChoice Residential Customer Response to TOU Rates

    SciTech Connect (OSTI)

    Peters, Jane S.; Moezzi, Mithra; Lutzenhiser, Susan; Woods, James; Dethman, Linda; Kunkle, Rick

    2009-10-01T23:59:59.000Z

    Research Into Action, Inc. and the Sacramento Municipal Utility District (SMUD) worked together to conduct research on the behaviors and energy use patterns of SMUD residential customers who voluntarily signed on to a Time-of-Use rate pilot launched under the PowerChoice label. The project was designed to consider the how and why of residential customers ability and willingness to engage in demand reduction behaviors, and to link social and behavioral factors to observed changes in demand. The research drew on a combination of load interval data and three successive surveys of participating households. Two experimental treatments were applied to test the effects of increased information on households ability to respond to the Time-of-Use rates. Survey results indicated that participants understood the purpose of the Time-of-Use rate and undertook substantial appropriate actions to shift load and conserve. Statistical tests revealed minor initial price effects and more marked, but still modest, adjustments to seasonal rate changes. Tests of the two information interventions indicated that neither made much difference to consumption patterns. Despite the lackluster statistical evidence for load shifting, the analysis points to key issues for critical analysis and development of residential Time-of-Use rates, especially pertinent as California sets the stage for demand response in more California residences.

  2. Aqueous Corrosion Rates for Waste Package Materials

    SciTech Connect (OSTI)

    S. Arthur

    2004-10-08T23:59:59.000Z

    The purpose of this analysis, as directed by ''Technical Work Plan for: Regulatory Integration Modeling and Analysis of the Waste Form and Waste Package'' (BSC 2004 [DIRS 171583]), is to compile applicable corrosion data from the literature (journal articles, engineering documents, materials handbooks, or standards, and national laboratory reports), evaluate the quality of these data, and use these to perform statistical analyses and distributions for aqueous corrosion rates of waste package materials. The purpose of this report is not to describe the performance of engineered barriers for the TSPA-LA. Instead, the analysis provides simple statistics on aqueous corrosion rates of steels and alloys. These rates are limited by various aqueous parameters such as temperature (up to 100 C), water type (i.e., fresh versus saline), and pH. Corrosion data of materials at pH extremes (below 4 and above 9) are not included in this analysis, as materials commonly display different corrosion behaviors under these conditions. The exception is highly corrosion-resistant materials (Inconel Alloys) for which rate data from corrosion tests at a pH of approximately 3 were included. The waste package materials investigated are those from the long and short 5-DHLW waste packages, 2-MCO/2-DHLW waste package, and the 21-PWR commercial waste package. This analysis also contains rate data for some of the materials present inside the fuel canisters for the following fuel types: U-Mo (Fermi U-10%Mo), MOX (FFTF), Thorium Carbide and Th/U Carbide (Fort Saint Vrain [FSVR]), Th/U Oxide (Shippingport LWBR), U-metal (N Reactor), Intact U-Oxide (Shippingport PWR, Commercial), aluminum-based, and U-Zr-H (TRIGA). Analysis of corrosion rates for Alloy 22, spent nuclear fuel, defense high level waste (DHLW) glass, and Titanium Grade 7 can be found in other analysis or model reports.

  3. National Utility Rate Database: Preprint

    SciTech Connect (OSTI)

    Ong, S.; McKeel, R.

    2012-08-01T23:59:59.000Z

    When modeling solar energy technologies and other distributed energy systems, using high-quality expansive electricity rates is essential. The National Renewable Energy Laboratory (NREL) developed a utility rate platform for entering, storing, updating, and accessing a large collection of utility rates from around the United States. This utility rate platform lives on the Open Energy Information (OpenEI) website, OpenEI.org, allowing the data to be programmatically accessed from a web browser, using an application programming interface (API). The semantic-based utility rate platform currently has record of 1,885 utility rates and covers over 85% of the electricity consumption in the United States.

  4. Model 923-B Mouse Gas Anesthesia Head Holder Adaptor Adjustment Features

    E-Print Network [OSTI]

    Kleinfeld, David

    Model 923-B Mouse Gas Anesthesia Head Holder Adaptor Adjustment Features Dorsal/Ventral dial.352.3139 Toll Free: 1.877.352.3275 ^^ci&ion Q)e&i^n^^^r ^esea/H^/i Model 923-B Mouse Gas Anesthesia Head Holder 923B-1/07 #12;MODEL 923-B MOUSE GAS ANESTHESIA HEAD HOLDER The KOPF Mouse Gas Anesthesia Head Holder

  5. Information Basic to Farm Adjustments in the High Plains Cotton Area of Texas.

    E-Print Network [OSTI]

    Thibodeaux, B. H. (Ben Hur); Bonnen, C. A. (Clarence Alfred); Magee, A. C. (Aden Combs)

    1944-01-01T23:59:59.000Z

    Division of Farm and Ranch Economics in Cooperation with Bureau of Agricultural Economics U. S. Department of Agriculture TEXAS AGRICULTURAL EXPERIMENT STATION A. B. CONNER, Director College Station, Texas BULLETIN NO. 652 JULY 1944... INFORMATION BASIC TO FARM ADJUSTMENTS IN THE HIGH PLAINS COTTON AREA OF TEXAS A. C. MAGEE, C. A. BONNEN, and B. H. THIBODEAUX AGRICULTURAL AND MECHANICAL COLLEGE OF TEXAS GIBB GILCHRIST, President [Blank Page in Original Bulletin] This bulletin deals...

  6. Upper Great Plains Rates information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ancillary Services Rate Data (2.4mb pdf) Transmission and Ancillary Services 2011 Rate True-up Calculation (3.4mb pdf) Power Reporting Miscellaneous Information If you have any...

  7. 2007 Wholesale Power Rate Schedules : 2007 General Rate Schedule Provisions.

    SciTech Connect (OSTI)

    United States. Bonneville Power Administration.

    2006-11-01T23:59:59.000Z

    This schedule is available for the contract purchase of Firm Power to be used within the Pacific Northwest (PNW). Priority Firm (PF) Power may be purchased by public bodies, cooperatives, and Federal agencies for resale to ultimate consumers, for direct consumption, and for Construction, Test and Start-Up, and Station Service. Rates in this schedule are in effect beginning October 1, 2006, and apply to purchases under requirements Firm Power sales contracts for a three-year period. The Slice Product is only available for public bodies and cooperatives who have signed Slice contracts for the FY 2002-2011 period. Utilities participating in the Residential Exchange Program (REP) under Section 5(c) of the Northwest Power Act may purchase Priority Firm Power pursuant to the Residential Exchange Program. Rates under contracts that contain charges that escalate based on BPA's Priority Firm Power rates shall be based on the three-year rates listed in this rate schedule in addition to applicable transmission charges. This rate schedule supersedes the PF-02 rate schedule, which went into effect October 1, 2001. Sales under the PF-07 rate schedule are subject to BPA's 2007 General Rate Schedule Provisions (2007 GRSPs). Products available under this rate schedule are defined in the 2007 GRSPs. For sales under this rate schedule, bills shall be rendered and payments due pursuant to BPA's 2007 GRSPs and billing process.

  8. Computer-intensive rate estimation, diverging statistics, and scanning

    E-Print Network [OSTI]

    Politis, Dimitris N.

    Computer-intensive rate estimation, diverging statistics, and scanning Tucker McElroy U.S. Bureau in a very general setting without requiring the choice of a tun- ing parameter. The notion of scanning method is ap- plied to different scans, and the resulting estimators are then combined to improve

  9. Discontinuous Load Rating Problem for Induction Motors Gennady A. Leonov

    E-Print Network [OSTI]

    Leonov, Gennady A.

    , is the parameter of influence of electromagnetic processes in a rotor on processes in the stator windings the influence of electromagnetic processes in a rotor on processes in the stator windings we assume in system (1Discontinuous Load Rating Problem for Induction Motors Gennady A. Leonov The transient processes

  10. Strong strain rate effect on the plasticity of amorphous silica nanowires

    SciTech Connect (OSTI)

    Yue, Yonghai, E-mail: yueyonghai@buaa.edu.cn [Key Laboratory of Bio-Inspired Smart Interfacial Science and Technology of Ministry of Education, Beijing Key Laboratory of Bio-Inspired Energy Materials and Devices, School of Chemistry and Environment, Beihang University, Beijing 100191 (China); Zheng, Kun [Institute of Microstructure and Property of Advanced Materials, Beijing University of Technology, Beijing 100124 (China)

    2014-06-09T23:59:59.000Z

    With electron-beam (e-beam) off, in-situ tensile experiments on amorphous silica nanowires (NWs) were performed inside a transmission electron microscope (TEM). By controlling the loading rates, the strain rate can be adjusted accurately in a wide range. The result shows a strong strain rate effect on the plasticity of amorphous silica NWs. At lower strain rate, the intrinsic brittle materials exhibit a pronounced elongation higher than 100% to failure with obvious necking near ambient temperature. At the strain rate higher than 5.23?×?10{sup ?3}/s, the elongation of the NW decreased dramatically, and a brittle fracture feature behavior was revealed. This ductile feature of the amorphous silica NWs has been further confirmed with the in-situ experiments under optical microscopy while the effect of e-beam irradiation could be eliminated.

  11. Parameter sensitivity analysis of tailored-pulse loading stimulation of Devonian gas shale

    SciTech Connect (OSTI)

    Barbour, T.G.; Mihalik, G.R.

    1980-11-01T23:59:59.000Z

    An evaluation of three tailored-pulse loading parameters has been undertaken to access their importance in gas well stimulation technology. This numerical evaluation was performed using STEALTH finite-difference codes and was intended to provide a measure of the effects of various tailored-pulse load configurations on fracture development in Devonian gas shale. The three parameters considered in the sensitivity analysis were: loading rate; decay rate; and sustained peak pressures. By varying these parameters in six computations and comparing the relative differences in fracture initiation and propagation the following conclusions were drawn: (1) Fracture initiation is directly related to the loading rate aplied to the wellbore wall. Loading rates of 10, 100 and 1000 GPa/sec were modeled. (2) If yielding of the rock can be prevented or minimized, by maintaining low peak pressures in the wellbore, increasing the pulse loading rate, to say 10,000 GPa/sec or more, should initiate additional multiple fractures. (3) Fracture initiation does not appear to be related to the tailored-pulse decay rate. Fracture extension may be influenced by the rate of decay. The slower the decay rate, the longer the crack extension. (4) Fracture initiation does not appear to be improved by a high pressure plateau in the tailored-pulse. Fracture propagation may be enhanced if the maintained wellbore pressure plateau is of sufficient magnitude to extent the range of the tangential tensile stresses to greater radial distances. 26 figures, 2 tables.

  12. Galaxy Structural Parameters in Source Extractor

    E-Print Network [OSTI]

    B. W. Holwerda

    2007-10-16T23:59:59.000Z

    Over the last decade, the Concentration, Asymmetry and Smoothness (CAS), as well as the M20 and GINI parameters have become popular to automatically classify distant galaxies in images. Ellipticals, spirals and irregular galaxies all appear to occupy different regions of this parameter space. At the same time, the Source Extractor (SE) program has become the mainstay to produce ob ject catalogs from large image surveys. A logical next step would be to incorporate the structural parameters into the Source Extractor software. There are however several problems that arise: 1) the CAS parameters are fits to the images and Source Extractor eschews fits in the interest of speed, 2) the definition of the structural parameters changed over time. Now that there is a clear and agreed-upon definition of the structural parameters, I am incorporating computed versions in the Source Extractor code (v2.5). The fitted CAS parameters are available for the GOODS-N/S fields and I compare the computed structural parameters to those found by the previous fits. My goal is to expand the source structure information in Source Extractor catalogs in order to improve automatic identification of sources, specifically of distant galaxies. The computed parameters perform reasonably close to the fitted versions but noise appears in faint ob jects due to a lack of information. For a subset of objects, the asymmetry signal is outside the SE boundaries and Smoothness still fails to compute for many ob jects. Type classification based on the SE parameters still lacks resolving power.

  13. 2007 Wholesale Power Rate Case Initial Proposal : Risk Analysis Study.

    SciTech Connect (OSTI)

    United States. Bonneville Power Administration.

    2005-11-01T23:59:59.000Z

    The Federal Columbia River Power System (FCRPS), operated on behalf of the ratepayers of the PNW by BPA and other Federal agencies, faces many uncertainties during the FY 2007-2009 rate period. Among these uncertainties, the largest revolve around hydro conditions, market prices and river operations for fish recovery. In order to provide a high probability of making its U.S. Treasury payments, BPA performs a Risk Analysis as part of its rate-making process. In this Risk Analysis, BPA identifies key risks, models their relationships, and then analyzes their impacts on net revenues (total revenues less expenses). BPA subsequently evaluates in the ToolKit Model the Treasury Payment Probability (TPP) resulting from the rates, risks, and risk mitigation measures described here and in the Wholesale Power Rate Development Study (WPRDS). If the TPP falls short of BPA's standard, additional risk mitigation revenues, such as PNRR and CRAC revenues are incorporated in the modeling in ToolKit until the TPP standard is met. Increased wholesale market price volatility and six years of drought have significantly changed the profile of risk and uncertainty facing BPA and its stakeholders. These present new challenges for BPA in its effort to keep its power rates as low as possible while fully meeting its obligations to the U.S. Treasury. As a result, the risk BPA faces in not receiving the level of secondary revenues that have been credited to power rates before receiving those funds is greater. In addition to market price volatility, BPA also faces uncertainty around the financial impacts of operations for fish programs in FY 2006 and in the FY 2007-2009 rate period. A new Biological Opinion or possible court-ordered change to river operations in FY 2006 through FY 2009 may reduce BPA's net revenues included Initial Proposal. Finally, the FY 2007-2009 risk analysis includes new operational risks as well as a more comprehensive analysis of non-operating risks. Both the operational and non-operational risks will be described in Section 2.0 of this study. Given these risks, if rates are designed using BPA's traditional approach of only adding Planned Net Revenues for Risk (PNRR), power rates would need to recover a much larger ''risk premium'' to meet BPA's TPP standard. As an alternative to high fixed risk premiums, BPA is proposing a risk mitigation package that combines PNRR with a variable rate mechanism similar to the cost recovery adjustment mechanisms used in the FY 2002-2006 rate period. The proposed risk mitigation package is less expensive on a forecasted basis because the rates can be adjusted on an annual basis to respond to uncertain financial outcomes. BPA is also proposing a Dividend Distribution Clause (DDC) to refund reserves in excess of $800M to customers in the event net revenues in the next rate period exceed current financial forecasts.

  14. A transitory interface component for the in-context visualization and adjustment of a value

    E-Print Network [OSTI]

    Webb, Andrew

    2009-05-15T23:59:59.000Z

    Some agent-based systems depend on eliciting ratings from the user. However, the user’s willingness to provide ratings is limited due to requisite demands of attention and effort. From a human-centered view, we redefine providing ratings...

  15. Microscopic description of neutron emission rates in compound nuclei

    E-Print Network [OSTI]

    Yi Zhu; Junchen Pei

    2014-11-02T23:59:59.000Z

    The neutron emission rates in thermal excited nuclei are conventionally described by statistical models with a phenomenological level density parameter that depends on excitation energies, deformations and mass regions. In the microscopic view of hot nuclei, the neutron emission rates can be determined by the external neutron gas densities without any free parameters. Therefore the microscopic description of thermal neutron emissions is desirable that can impact several understandings such as survival probabilities of superheavy compound nuclei and neutron emissivity in reactors. To describe the neutron emission rates microscopically, the external thermal neutron gases are self-consistently obtained based on the Finite-Temperature Hartree-Fock-Bogoliubov (FT-HFB) approach. The results are compared with the statistical model to explore the connections between the FT-HFB approach and the statistical model. The Skyrme FT-HFB equation is solved by HFB-AX in deformed coordinate spaces. Based on the FT-HFB approach, the thermal properties and external neutron gas are properly described with the self-consistent gas substraction procedure. Then neutron emission rates can be obtained based on the densities of external neutron gases. The thermal statistical properties of $^{238}$U and $^{258}$U are studied in detail in terms of excitation energies. The thermal neutron emission rates in $^{238, 258}$U and superheavy compound nuclei $_{112}^{278}$Cn and $_{114}^{292}$Fl are calculated, which agree well with the statistical model by adopting an excitation-energy-dependent level density parameter. The coordinate-space FT-HFB approach can provide reliable microscopic descriptions of neutron emission rates in hot nuclei, as well as microscopic constraints on the excitation energy dependence of level density parameters for statistical models.

  16. Two-Parameter Dynamics and Geometry

    E-Print Network [OSTI]

    Zhi Hu; Mulin Yan; Sen Hu

    2015-01-10T23:59:59.000Z

    In this paper we present the two-parameter dynamics which is implied by the law of inertia in flat spacetime. A remarkable perception is that (A)dS4 geometry may emerge from the two-parameter dynamics, which exhibits some phenomenon of dynamics/ geometry correspondence. We also discuss the Unruh effects within the context of two-parameter dynamics. In the last section we construct various invariant actions with respect to the broken symmetry groups.

  17. Uncertainty evaluation of delayed neutron decay parameters

    E-Print Network [OSTI]

    Wang, Jinkai

    2009-05-15T23:59:59.000Z

    .......... 80 Figure 6.1 Fitted E2 from Different Algorithms (Saturation Mode)................... 85 Figure 6.2 Standard Deviations of Fitted Parameter Ratios (Saturation Mode). 92 Figure 6.3 Standard Deviations of Fitted Parameter Ratios (Pulse Mode...)......... 92 Figure 6.4 Standard Deviations of Fitted Parameter Ratios with Group-1 Fixed (Pulse Mode) ........................................................................... 93 Figure 6.5 The Ratios of Different Data Sets to Keepin?s Values...

  18. Rate controlling model for bioremediation of oil contaminated soil

    SciTech Connect (OSTI)

    Li, K.Y.; Annamali, S.N.; Hopper, J.R. (Lamar Univ., Beaumont, TX (United States))

    1993-11-01T23:59:59.000Z

    A mathematical model of bio-remediation of hydrocarbons in a soil matrix has been developed to predict the rate controlling step and the remediation rate during the bioremediation of a contaminated soil. The model is based on mass transfer of oxygen and oil into the aqueous solution in the soil matrix and the biodegradation of the hydrocarbons in the aqueous solution. Monod's equation was used to describe the biodegradation rate in aqueous solution while the mass transfer equations were used to describe the mass transfer rates of oxygen and oil in the soil matrix. Results from model calculations indicate that the bio-remediation rate increases and approaches a limiting value when one of the rates becomes controlling. When the parameters of the site soil samples are measured and the solubilities of oxygen and oil in aqueous solution are obtained, the bioremediation rate can be predicted by this model. The rate controlling step of the bioremediation site may be identified quickly and steps to improve the bioremediation rate can be recommended. 8 refs., 7 figs.

  19. Outdoor PV Module Degradation of Current-Voltage Parameters: Preprint

    SciTech Connect (OSTI)

    Smith, R. M.; Jordan, D. C.; Kurtz, S. R.

    2012-04-01T23:59:59.000Z

    Photovoltaic (PV) module degradation rate analysis quantifies the loss of PV power output over time and is useful for estimating the impact of degradation on the cost of energy. An understanding of the degradation of all current-voltage (I-V) parameters helps to determine the cause of the degradation and also gives useful information for the design of the system. This study reports on data collected from 12 distinct mono- and poly-crystalline modules deployed at the National Renewable Energy Laboratory (NREL) in Golden, Colorado. Most modules investigated showed < 0.5%/year decrease in maximum power due to short-circuit current decline.

  20. Sandia National Laboratories: main parameter determining laminate...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    parameter determining laminate fatigue lifetime is the cumulative time under load New Material Tests Show Biaxial Laminate Creep Is Important for Large Wind-Turbine Blades On...

  1. Experimental Investigation of Effect of Injection Parameters...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Experimental Investigation of Effect of Injection Parameters, Compression Ratio and Ultra-cooled EGR on CI Engine Performance and Emissions Low temperature combustion,...

  2. ONE-PARAMETER CONTINUOUS FIELDS OF KIRCHBERG ...

    E-Print Network [OSTI]

    2008-09-05T23:59:59.000Z

    One-parameter separable unital continuous fields of Kirchberg algebras (nuclear purely infinite simple C*-algebras) with torsion free Ki-groups and trivial ...

  3. Sustainable Building Rating Systems Summary

    SciTech Connect (OSTI)

    Fowler, Kimberly M.; Rauch, Emily M.

    2006-07-01T23:59:59.000Z

    The purpose of this document is to offer information that could be used to compare and contrast sustainable building rating systems.

  4. Adjustable, rapidly switching microfluidic gradient generation using focused travelling surface acoustic waves

    SciTech Connect (OSTI)

    Destgeer, Ghulam; Im, Sunghyuk; Hang Ha, Byung; Ho Jung, Jin; Ahmad Ansari, Mubashshir; Jin Sung, Hyung, E-mail: hjsung@kaist.ac.kr [Department of Mechanical Engineering, KAIST, 291 Daejak-ro, Yuseong-gu, Daejeon 305-701 (Korea, Republic of)

    2014-01-13T23:59:59.000Z

    We demonstrate a simple device to generate chemical concentration gradients in a microfluidic channel using focused travelling surface acoustic waves (F-TSAW). A pair of curved interdigitated metal electrodes deposited on the surface of a piezoelectric (LiNbO{sub 3}) substrate disseminate high frequency sound waves when actuated by an alternating current source. The F-TSAW produces chaotic acoustic streaming flow upon its interaction with the fluid inside a microfluidic channel, which mixes confluent streams of chemicals in a controlled fashion for an adjustable and rapidly switching gradient generation.

  5. Information Basic to Farm Adjustments in the Rolling Plains Area of Texas.

    E-Print Network [OSTI]

    Bonnen, C. A. (Clarence Alfred); Czarowitz, P. H. (Philmore Hempel)

    1942-01-01T23:59:59.000Z

    , affeptiny but few farms. Because of the local nature of hail storms they may have no widespread effect upon farm incomes, but may cause partial or complete crop failures on a few farms. Damage to young crors from wind results through the rapid movement...A. B. CONNER. DIRECTOR \\ College Station, Texas \\ i 'i RULLETIS SO. 61'1 SEPTEJPEER 1942 I -4. INFORMATION BASIC TO FARM ADJUST- BTENTS IN THE ROLLING PLAIXS AREA4 OF TEXAS Di~sion of Farm nncl Xwnch Economics 3ULTURAL AND MECH...

  6. A computer test bench for checking and adjusting the automatic regulators of generator excitation systems

    SciTech Connect (OSTI)

    Dovganyuk, I. Ya.; Labunets, I. A.; Plotnikova, T. V.; Sokur, P. V. [Affiliate of the 'NTTs Elektroenergetiki' Company - Scientific Research Institute of Electric Power (VNIIE) (Russian Federation)

    2008-05-15T23:59:59.000Z

    A computer test bench for testing and debugging natural samples of the automatic excitation regulation systems of generators, the protection units and the power part of the excitation system is described. The bench includes a personal computer with specialized input-output circuit boards for analog and digital signals, and enables the time and cost involved in developing and checking control systems to be reduced considerably. The program employed operates in real time and enables the automatic excitation regulators of synchronous generators and generators with longitudinal-transverse excitation in a specific power system to be adjusted.

  7. U.S. Coalbed Methane Proved Reserves Adjustments (Billion Cubic Feet)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40 Buildingto17 34 44Year Jan Feb Mar Apr May Jun602 1,397 125 QL1.PastAdjustments

  8. U.S. Natural Gas Plant Liquids, Reserves Adjustments (Million Barrels)

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40CoalLease(Billion Cubic Feet)Year Jan Feb Mar Apr May Jun2009Adjustments (Million

  9. Fair Labor Standard Act and Service Contract Act Price Adjustment UT-B Contracts Div Page 1 of 1

    E-Print Network [OSTI]

    Pennycook, Steve

    Fair Labor Standard Act and Service Contract Act ­ Price Adjustment UT-B Contracts Div Sept 2009 Page 1 of 1 flsa-price-adj-ext-sept09.doc FAIR LABOR STANDARDS ACT AND SERVICE CONTRACT ACT - PRICE

  10. Impact of Input Voltage Sag and Unbalance on DC Link Inductor and Capacitor Stress in Adjustable Speed Drives

    E-Print Network [OSTI]

    Lipo, Thomas

    , outages, voltage surges and sags. Power quality problems induced in adjustable-speed drives (ASDs) have (120 Hz for 60 Hz system) that increases the electrical stresses on the dc bus choke inductor (if used

  11. Modeling household adoption of earthquake hazard adjustments: a longitudinal panel study of Southern California and Western Washington residents 

    E-Print Network [OSTI]

    Arlikatti, Sudha S

    2006-10-30T23:59:59.000Z

    This research, aimed at advancing the theory of environmental hazard adjustment processes by contrasting households from three cities in a high seismic hazard area with households from three other cities in a moderate ...

  12. Expanded Prussian Blue Analogues Incorporating [Re6Se8(CN)6]3-/4-Clusters: Adjusting Porosity via Charge Balance

    E-Print Network [OSTI]

    Shores, Matthew P.

    Expanded Prussian Blue Analogues Incorporating [Re6Se8(CN)6]3-/4- Clusters: Adjusting Porosity via of octahedral [M(CN)6]3-/4- complexes for the synthesis of microporous Prussian blue type solids with adjustable to be a direct expansion of Prussian blue (Fe4[Fe(CN)6]3,14H2O), with [Re6Se8(CN)6]4- clusters connected through

  13. Upscaling Calcite Growth Rates From the Mesoscale to the Macroscale

    SciTech Connect (OSTI)

    Bracco, Jacquelyn N [ORNL; Stack, Andrew G [ORNL; Steefel, Carl I [Lawrence Berkeley National Laboratory (LBNL)

    2013-01-01T23:59:59.000Z

    Quantitative prediction of mineral reaction rates in the subsurface remains a daunting task partly because a key parameter for macroscopic models, the reactive site density, is poorly constrained. Here we report atomic force microscopy (AFM) measurements on the calcite surface of monomolecular step densities, treated as equivalent to the reactive site density, as a function of aqueous calcium-to-carbonate ratio and saturation index. Data for the obtuse step orientation are combined with existing step velocity measurements to generate a model that predicts overall macroscopic calcite growth rates. The model is quantitatively consistent with several published macroscopic rates under a range of alkaline solution conditions, particularly for two of the most comprehensive data sets without the need for additional fit parameters. The model reproduces peak growth rates and its functional form is simple enough to be incorporated into reactive transport or other macroscopic models designed for predictions in porous media. However, it currently cannot model equilibrium, pH effects, and may overestimate rates at high aqueous calcium-to-carbonate ratios. The discrepancies in rates at high calcium-to-carbonate ratios may be due to differences in pre-treatment, such as exposing the seed material to SI 1.0 to generate/develop growth hillocks, or other factors.

  14. Rate Effects for Mixed-Mode Fracture of Plastically Deforming, Adhesively-Bonded Structures

    E-Print Network [OSTI]

    Thouless, Michael

    from a commercial adhesive and a dual-phase steel has been studied under different rates. Since mixed- mode fracture occurs along the interface between the steel and adhesive, the cohesive- parameters

  15. Calculation Methods for the Heat Release Rate of Materials of Unknown Composition 

    E-Print Network [OSTI]

    Biteau, Hubert; Steinhaus, Thomas; Simeoni, Albert; Schemel, Christopher; Marlair, Guy; Bal, Nicolas; Torero, Jose L

    The Heat Release Rate (HRR) is a critical parameter to characterise a fire. Different methods have been developed to estimate it. The most widespread techniques are based on mass balance. If the heat of combustion of the ...

  16. Strain rate sensitive constitutive equations

    E-Print Network [OSTI]

    Nelson, Charles Edward

    1971-01-01T23:59:59.000Z

    1 Computed Constants For Far'ous . Baterials 47 LIST OF FIGURFS Pace Figure I Comparison of Rate Data For Commercially Pure Aluminum Figure 2 Dynamic Loading Regimes 17 Figure 3 Yield Criteria 32 Figure 4 Uni-axial Stress-Strain Rate...

  17. RECYCLING RATE STUDY Prepared by

    E-Print Network [OSTI]

    Laughlin, Robert B.

    NATIONAL RECYCLING RATE STUDY Prepared by: Smith, Bucklin and Associates, Inc. Market Research and Statistics Division Chicago, Illinois July 2003 PRINTED ON RECYCLED PAPER #12;BCI RECYCLING RATE STUDY TABLE ....................................................................................................1 II. METHODOLOGY A. Total Pounds of Lead Recycled from Batteries

  18. Extragalactic database. VII Reduction of astrophysical parameters

    E-Print Network [OSTI]

    G. Paturel; H. Andernach; L. Bottinelli; H. Di Nella; N. Durand; R. Garnier; L. Gouguenheim; P. Lanoix; M. C. Marthinet; C. Petit; J. Rousseau; G. Theureau; I. Vauglin

    1998-06-10T23:59:59.000Z

    The Lyon-Meudon Extragalactic database (LEDA) gives a free access to the main astrophysical parameters for more than 100,000 galaxies. The most common names are compiled allowing users to recover quickly any galaxy. All these measured astrophysical parameters are first reduced to a common system according to well defined reduction formulae leading to mean homogeneized parameters. Further, these parameters are also transformed into corrected parameters from widely accepted models. For instance, raw 21-cm line widths are transformed into mean standard widths after correction for instrumental effect and then into maximum velocity rotation properly corrected for inclination and non-circular velocity. This paper presents the reduction formulae for each parameter: coordinates, morphological type and luminosity class, diameter and axis ratio, apparent magnitude (UBV, IR, HI) and colors, maximum velocity rotation and central velocity dispersion, radial velocity, mean surface brightness, distance modulus and absolute magnitude, and group membership. For each of these parameters intermediate quantities are given: galactic extinction, inclination, K-correction etc.. All these parameters are available from direct connexion to LEDA (telnet lmc.univ-lyon1.fr, login: leda, no passwd OR http://www-obs.univ-lyon1.fr/leda ) and distributed on a standard CD-ROM (PGC-ROM 1996) by the Observatoire de Lyon via the CNRS (mail to petit@obs.univ-lyon1.fr).

  19. Resonant frequency detection and adjustment method for a capacitive transducer with differential transformer bridge

    SciTech Connect (OSTI)

    Hu, M.; Bai, Y. Z., E-mail: abai@mail.hust.edu.cn; Zhou, Z. B., E-mail: zhouzb@mail.hust.edu.cn; Li, Z. X.; Luo, J. [MOE Key Laboratory of Fundamental Physical Quantities Measurement, School of Physics, Huazhong University of Science and Technology, Wuhan 430074 (China)] [MOE Key Laboratory of Fundamental Physical Quantities Measurement, School of Physics, Huazhong University of Science and Technology, Wuhan 430074 (China)

    2014-05-15T23:59:59.000Z

    The capacitive transducer with differential transformer bridge is widely used in ultra-sensitive space accelerometers due to their simple structure and high resolution. In this paper, the front-end electronics of an inductive-capacitive resonant bridge transducer is analyzed. The analysis result shows that the performance of this transducer depends upon the case that the AC pumping frequency operates at the resonance point of the inductive-capacitive bridge. The effect of possible mismatch between the AC pumping frequency and the actual resonant frequency is discussed, and the theoretical analysis indicates that the output voltage noise of the front-end electronics will deteriorate by a factor of about 3 due to either a 5% variation of the AC pumping frequency or a 10% variation of the tuning capacitance. A pre-scanning method to determine the actual resonant frequency is proposed followed by the adjustment of the operating frequency or the change of the tuning capacitance in order to maintain expected high resolution level. An experiment to verify the mismatching effect and the adjustment method is provided.

  20. Method, system and apparatus for monitoring and adjusting the quality of indoor air

    DOE Patents [OSTI]

    Hartenstein, Steven D.; Tremblay, Paul L.; Fryer, Michael O.; Hohorst, Frederick A.

    2004-03-23T23:59:59.000Z

    A system, method and apparatus is provided for monitoring and adjusting the quality of indoor air. A sensor array senses an air sample from the indoor air and analyzes the air sample to obtain signatures representative of contaminants in the air sample. When the level or type of contaminant poses a threat or hazard to the occupants, the present invention takes corrective actions which may include introducing additional fresh air. The corrective actions taken are intended to promote overall health of personnel, prevent personnel from being overexposed to hazardous contaminants and minimize the cost of operating the HVAC system. The identification of the contaminants is performed by comparing the signatures provided by the sensor array with a database of known signatures. Upon identification, the system takes corrective actions based on the level of contaminant present. The present invention is capable of learning the identity of previously unknown contaminants, which increases its ability to identify contaminants in the future. Indoor air quality is assured by monitoring the contaminants not only in the indoor air, but also in the outdoor air and the air which is to be recirculated. The present invention is easily adaptable to new and existing HVAC systems. In sum, the present invention is able to monitor and adjust the quality of indoor air in real time by sensing the level and type of contaminants present in indoor air, outdoor and recirculated air, providing an intelligent decision about the quality of the air, and minimizing the cost of operating an HVAC system.

  1. Innovative Rates Program. Final report

    SciTech Connect (OSTI)

    Not Available

    1982-06-21T23:59:59.000Z

    Title II of the Energy Conservation and Production Act (ECPA) as amended by the Public Utility Regulatory Policies Act (PURPA) provided financial assistance to state utility regulatory commissions, nonregulated electric utilities, and the Tennessee Valley Authority through the Innovative Rates Program. The financial assistance was to be used to plan or carry out electric utility regulatory rate reform initiatives relating to innovative rate structures that encourage conservation of energy, electric utility efficiency and reduced costs, and equitable rates to consumers. The Federal and local objectives of the project are described. Activities planned and accomplishments are summarized for the following: project management, data collection, utility bill evaluation, billing enclosure/mailing evaluation, media program evaluation, display evaluation, rate study sessions evaluation, speakers bureau evaluation, and individual customer contacts. A timetable/milestone chart and financial information are included. (MHR)

  2. WP-07 Power Rate Case (rates/ratecases)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening aTurbulenceUtilizeRural PublicRates > Rate Cases > Rates

  3. Weathering rates of marble in laboratory and outdoor conditions

    SciTech Connect (OSTI)

    Yerrapragada, S.S.; Chirra, S.R.; Jaynes, J.H.; Bandyopadhyay, J.K.; Gauri, K.L. [Univ of Louisville, KY (United States); Li, S. [Metro Services Lab., Louisville, KY (United States)

    1996-09-01T23:59:59.000Z

    In the modern urban atmosphere SO{sub 2} and NO{sub 2} attack calcite (CaCO{sub 3}) in marble exposed at rain-sheltered surfaces creating largely gypsum (CaSO{sub 4}{center_dot}2H{sub 2}O) crusts that eventually exfoliate. In combination with CO{sub 2} these gases erode the marble at unsheltered surfaces. the authors report the development of mathematical models to predict the rate of growth of crust and the rate of surface recession. To determine the rate of growth of crust the kinetic rate constant, diffusion rate, and the order of reaction were determined by the application of the shrinking-core model applied to data generated in laboratory experiments. Based on these parameters /and average ambient levels of 10 parts per billion (ppb) SO{sub 2} and 25 ppb NO{sub 2} in Louisville, Ky., the rate of crust formation for this metro area was calculated to be 1.8 {micro}m in the first year. However, the rate of recession was modeled from data obtained by exposing marble slabs to rainfalls. A surface recession of 15 {micro}m/yr was calculated. The models predicted well the rate of growth of crust observed at several sites in Louisville and the predicted surface recession compared well with values reported in the literature.

  4. External dose-rate conversion factors for calculation of dose to the public

    SciTech Connect (OSTI)

    Not Available

    1988-07-01T23:59:59.000Z

    This report presents a tabulation of dose-rate conversion factors for external exposure to photons and electrons emitted by radionuclides in the environment. This report was prepared in conjunction with criteria for limiting dose equivalents to members of the public from operations of the US Department of Energy (DOE). The dose-rate conversion factors are provided for use by the DOE and its contractors in performing calculations of external dose equivalents to members of the public. The dose-rate conversion factors for external exposure to photons and electrons presented in this report are based on a methodology developed at Oak Ridge National Laboratory. However, some adjustments of the previously documented methodology have been made in obtaining the dose-rate conversion factors in this report. 42 refs., 1 fig., 4 tabs.

  5. Charged-Particle Thermonuclear Reaction Rates: II. Tables and Graphs of Reaction Rates and Probability Density Functions

    E-Print Network [OSTI]

    Christian Iliadis; Richard Longland; Art Champagne; Alain Coc; Ryan Fitzgerald

    2010-04-23T23:59:59.000Z

    Numerical values of charged-particle thermonuclear reaction rates for nuclei in the A=14 to 40 region are tabulated. The results are obtained using a method, based on Monte Carlo techniques, that has been described in the preceding paper of this series (Paper I). We present a low rate, median rate and high rate which correspond to the 0.16, 0.50 and 0.84 quantiles, respectively, of the cumulative reaction rate distribution. The meaning of these quantities is in general different from the commonly reported, but statistically meaningless expressions, "lower limit", "nominal value" and "upper limit" of the total reaction rate. In addition, we approximate the Monte Carlo probability density function of the total reaction rate by a lognormal distribution and tabulate the lognormal parameters {\\mu} and {\\sigma} at each temperature. We also provide a quantitative measure (Anderson-Darling test statistic) for the reliability of the lognormal approximation. The user can implement the approximate lognormal reaction rate probability density functions directly in a stellar model code for studies of stellar energy generation and nucleosynthesis. For each reaction, the Monte Carlo reaction rate probability density functions, together with their lognormal approximations, are displayed graphically for selected temperatures in order to provide a visual impression. Our new reaction rates are appropriate for bare nuclei in the laboratory. The nuclear physics input used to derive our reaction rates is presented in the subsequent paper of this series (Paper III). In the fourth paper of this series (Paper IV) we compare our new reaction rates to previous results.

  6. Microcomputer aided calculations of parameters for spray dryer operation

    SciTech Connect (OSTI)

    Yeh, J.T.; Gyorke, D.F.; Pennline, H.W.; Drummond, C.J.

    1985-01-01T23:59:59.000Z

    This paper provides a series of practical microcomputer programs that can be used as a tool by engineers and researchers working with spray dryers for combustion process effluent control. The microcomputer programs calculate flue gas composition (CO/sub 2/, N/sub 2/, O/sub 2/, H/sub 2/O, and SO/sub 2/) from the composition of the fuel. The residence time of the flue gas in a spray dryer can be estimated, and using values provided by the user for the flow of water and absorbent slurry in the spray dryer, the program recalculates the flue gas composition and heat capacity at the exit of the spray dryer without accounting for any SO/sub 2/ removal that could occur in the spray dryer. From these values and the system pressure, the dew point and flue gas temperature at the spray dryer exit are calculated, providing the approach to saturation resulting from this choice of operating parameters. This computer code would enable a process engineer to quickly evaluate effects of important process parameters, such as flue gas temperature at the inlet to the spray dryer, atomizer water feed rate, and absorbent slurry concentration and feed rate, on the operation of a spray dryer.

  7. Parameter study of a vehicle-scale hydrogen storage system.

    SciTech Connect (OSTI)

    Johnson, Terry Alan; Kanouff, Michael P.

    2010-04-01T23:59:59.000Z

    Sandia National Laboratories has developed a vehicle-scale prototype hydrogen storage system as part of a Work For Others project funded by General Motors. This Demonstration System was developed using the complex metal hydride sodium alanate. For the current work, we have continued our evaluation of the GM Demonstration System to provide learning to DOE's hydrogen storage programs, specifically the new Hydrogen Storage Engineering Center of Excellence. Baseline refueling data during testing for GM was taken over a narrow range of optimized parameter values. Further testing was conducted over a broader range. Parameters considered included hydrogen pressure and coolant flow rate. This data confirmed the choice of design pressure of the Demonstration System, but indicated that the system was over-designed for cooling. Baseline hydrogen delivery data was insufficient to map out delivery rate as a function of temperature and capacity for the full-scale system. A more rigorous matrix of tests was performed to better define delivery capabilities. These studies were compared with 1-D and 2-D coupled multi-physics modeling results. The relative merits of these models are discussed along with opportunities for improved efficiency or reduced mass and volume.

  8. Supernova rates and stellar populations

    E-Print Network [OSTI]

    F. Mannucci

    2007-08-03T23:59:59.000Z

    We discuss the results about the nature of type Ia Supernovae that can be derived by studying their rates in different stellar populations. While the evolution of SN photometry and spectra can constrain the explosion mechanism, the SN rate depends on the progenitor system. We review the current available data on rates as a function of parent galaxy color, morphology, star formation rate, radio luminosity and environment. By studying the variation of the rates with the color of the parent galaxy, a strong evidence was established that type Ia SNe come from both young and old stars. The dependence of the rates with the radio power of the parent galaxy is best reproduced by a bimodal distribution of delay time between the formation of the progenitor and its explosion as a SN. Cluster early-type galaxies show higher type Ia SN rate with respect to field galaxies, and this effect can be due either to traces of young stars or to differences in the delay time distribution.

  9. How to fool CMB parameter estimation

    E-Print Network [OSTI]

    William H. Kinney

    2000-05-19T23:59:59.000Z

    With the release of the data from the Boomerang and MAXIMA-1 balloon flights, estimates of cosmological parameters based on the Cosmic Microwave Background (CMB) have reached unprecedented precision. In this paper I show that it is possible for these estimates to be substantially biased by features in the primordial density power spectrum. I construct primordial power spectra which mimic to within cosmic variance errors the effect of changing parameters such as the baryon density and neutrino mass, meaning that even an ideal measurement would be unable to resolve the degeneracy. Complementary measurements are necessary to resolve this ambiguity in parameter estimation efforts based on CMB temperature fluctuations alone.

  10. Asset Prices and Exchange Rates

    E-Print Network [OSTI]

    Pavlova, Anna

    2003-08-01T23:59:59.000Z

    This paper develops a simple two-country, two-good model, in which the real exchange rate, stock and bond prices are jointly determined. The model predicts that ...

  11. Asset Prices and Exchange Rates

    E-Print Network [OSTI]

    Pavlova, Anna

    2004-11-30T23:59:59.000Z

    This paper develops a simple two-country, two-good model, in which the real exchange rate, stock and bond prices are jointly determined. The model predicts that stock market prices are correlated ...

  12. Tier 2 Vintage Rate Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    period FY2015 through 2028. Customers have a diversification right to limit the amount of power they purchase at the Load Growth rate in future years with notice provided by...

  13. High repetition rate fiber lasers

    E-Print Network [OSTI]

    Chen, Jian, Ph. D. Massachusetts Institute of Technology

    2009-01-01T23:59:59.000Z

    This thesis reports work in high repetition rate femtosecond fiber lasers. Driven by the applications including optical arbitrary waveform generation, high speed optical sampling, frequency metrology, and timing and frequency ...

  14. Statistical Methods for Thermonuclear Reaction Rates and Nucleosynthesis Simulations

    E-Print Network [OSTI]

    Christian Iliadis; Richard Longland; Alain Coc; F. X. Timmes; Art E. Champagne

    2014-09-19T23:59:59.000Z

    Rigorous statistical methods for estimating thermonuclear reaction rates and nucleosynthesis are becoming increasingly established in nuclear astrophysics. The main challenge being faced is that experimental reaction rates are highly complex quantities derived from a multitude of different measured nuclear parameters (e.g., astrophysical S-factors, resonance energies and strengths, particle and gamma-ray partial widths). We discuss the application of the Monte Carlo method to two distinct, but related, questions. First, given a set of measured nuclear parameters, how can one best estimate the resulting thermonuclear reaction rates and associated uncertainties? Second, given a set of appropriate reaction rates, how can one best estimate the abundances from nucleosynthesis (i.e., reaction network) calculations? The techniques described here provide probability density functions that can be used to derive statistically meaningful reaction rates and final abundances for any desired coverage probability. Examples are given for applications to s-process neutron sources, core-collapse supernovae, classical novae, and big bang nucleosynthesis.

  15. Electric Rate Alternatives to Cogeneration

    E-Print Network [OSTI]

    Sandberg, K. R. Jr.

    "ELECTRIC RATE ALTERNATIVES TO COGENERATION" K. R. SANDBERG, JR. INDUSTRIAL ACCOUNTS MANAGER - TEXAS GULF STATES UTILITIES COMPANY BEAUMONT, TEXAS ABSTRACT This paper discusses electric rate slternatives to cogeneration for the industrisl... PERSPECTIVE Gulf States Utilities was incorporated in 1925 and is primarily in the business of generating. transmitting and distributing electricity to 555.000 customers in southeast Texas and south Louisiana. The service area extends 350 miles westward...

  16. Glacial isostatic adjustment and Earth rotation: Refined constraints on the viscosity of the deepest mantle

    SciTech Connect (OSTI)

    Peltier, W.R.; Jiang, X. [Univ. of Toronto, Ontario (Canada)] [Univ. of Toronto, Ontario (Canada)

    1996-02-10T23:59:59.000Z

    This report explores the use of the present-day rate and direction of polar wander and the magnitude of the nontidal acceleration of the rate of planetary rotation of the earth to contrain the viscosity of the lower regions of the lower mantle.

  17. Thermophysical parameters of the LBO crystal

    SciTech Connect (OSTI)

    Grechin, Sergei G [Scientific-Research Institute of Radioelectronics and Laser Technology at the N.E. Bauman Moscow State Technical University, Moscow (Russian Federation); Zuev, A V; Fokin, A S [All-Russian Scientific Research Institute of Aviation Materials, Moscow (Russian Federation); Kokh, Aleksandr E [V.S.Sobolev Institute of Geology and Mineralogy, Siberian Branch, Russian Academy of Sciences, Novosibirsk (Russian Federation); Moiseev, N V; Popov, Petr A; Sidorov, Aleksei A [Acad. I. G. Petrovskii Bryansk State University, Bryansk (Russian Federation)

    2010-08-27T23:59:59.000Z

    The thermophysical parameters (linear thermal expansion coefficients, thermal conductivities, and heat capacity) of the lithium triborate (LBO) crystal are measured and compared with previously published data. (nonlinear-optics phenomena)

  18. Integral data analysis for resonance parameters determination

    SciTech Connect (OSTI)

    Larson, N.M.; Leal, L.C.; Derrien, H.

    1997-09-01T23:59:59.000Z

    Neutron time-of-flight experiments have long been used to determine resonance parameters. Those resonance parameters have then been used in calculations of integral quantities such as Maxwellian averages or resonance integrals, and results of those calculations in turn have been used as a criterion for acceptability of the resonance analysis. However, the calculations were inadequate because covariances on the parameter values were not included in the calculations. In this report an effort to correct for that deficiency is documented: (1) the R-matrix analysis code SAMMY has been modified to include integral quantities of importance, (2) directly within the resonance parameter analysis, and (3) to determine the best fit to both differential (microscopic) and integral (macroscopic) data simultaneously. This modification was implemented because it is expected to have an impact on the intermediate-energy range that is important for criticality safety applications.

  19. Language model parameter estimation using user transcriptions

    E-Print Network [OSTI]

    Hsu, Bo-June

    In limited data domains, many effective language modeling techniques construct models with parameters to be estimated on an in-domain development set. However, in some domains, no such data exist beyond the unlabeled test ...

  20. Compressing measurements in quantum dynamic parameter estimation

    E-Print Network [OSTI]

    Magesan, Easwar

    We present methods that can provide an exponential savings in the resources required to perform dynamic parameter estimation using quantum systems. The key idea is to merge classical compressive sensing techniques with ...

  1. Load following capability of CANDLE reactor by adjusting coolant operation condition

    SciTech Connect (OSTI)

    Sekimoto, Hiroshi; Nakayama, Sinsuke [Research Laboratory for Nuclear Reactors, Tokyo Institute of Technology 2-12-1-N1-17, Ookayama, Meguro-ku 152-8550 (Japan)

    2012-06-06T23:59:59.000Z

    The load following capability of CANDLE reactor is investigated in the condition that the control rods are unavailable. Both sodium cooled metallic fuel fast reactor (SFR) and {sup 208}Pb cooled metallic fuel fast reactor (LFR) are investigated for their performance in power rate changing by changing its coolant operation condition; either coolant flow rate or coolant inlet temperature. The change by coolant flow rate is difficult especially for SFR because the maximum temperature criteria on cladding material may be violated. The power rate can be changed for its full range easily by changing the coolant temperature at the core inlet. LFR can reduce the same amount of power rate by smaller change of temperature than SFR. However, the coolant output temperature is generally decreased for this method and the thermal efficiency becomes worse.

  2. Self-adjustable supplemental support system for a cylindrical container in a housing

    DOE Patents [OSTI]

    Blaushild, Ronald M. (Wilkinsburg, PA)

    1987-01-01T23:59:59.000Z

    A self-adjustable supplementary support system for a cylindrical container coaxially disposed in a cylindrical housing by upper flanged supports has a plurality of outwardly extending bracket units on the external surface of the container which coact with inwardly extending resiliently outwardly extending bracket units on the inner wall of the cylindrical housing. The bracket units have flanges which form a concave surface that seats on support bars, attached by links to torsion bars that are secured to ring segments annularly spaced about the inner wall of the cylindrical housing and the bracket units and support bars coact with each other to radially position and support the container in the housing during movement of the two components from a vertical to a horizontal position, and during transportation of the same.

  3. Self-adjustable supplemental support system for a cylindrical container in a housing

    DOE Patents [OSTI]

    Blaushild, R.M.

    1987-01-30T23:59:59.000Z

    A self-adjustable supplementary support system for a cylindrical container coaxially disposed in a cylindrical housing by upper flanged supports has a plurality of outwardly extending bracket units on the external surface of the container which coact with inwardly extending resiliently outwardly extending bracket units on the inner wall of the cylindrical housing. The bracket units have flanges which form a concave surface that seats on support bars, attached by links to torsion bars that are secured to ring segments annularly spaced about the inner wall of the cylindrical housing and the bracket units and support bars coact with each other to radially position and support the container in the housing during movement of the two components from a vertical to a horizontal position, and during transportation of the same. 14 figs.

  4. Methods, systems and apparatus for adjusting duty cycle of pulse width modulated (PWM) waveforms

    DOE Patents [OSTI]

    Gallegos-Lopez, Gabriel; Kinoshita, Michael H; Ransom, Ray M; Perisic, Milun

    2013-05-21T23:59:59.000Z

    Embodiments of the present invention relate to methods, systems and apparatus for controlling operation of a multi-phase machine in a vector controlled motor drive system when the multi-phase machine operates in an overmodulation region. The disclosed embodiments provide a mechanism for adjusting a duty cycle of PWM waveforms so that the correct phase voltage command signals are applied at the angle transitions. This can reduce variations/errors in the phase voltage command signals applied to the multi-phase machine so that phase current may be properly regulated thus reducing current/torque oscillation, which can in turn improve machine efficiency and performance, as well as utilization of the DC voltage source.

  5. UNCORRECTEDPROOF Parameter identification in dynamical models of

    E-Print Network [OSTI]

    Timmer, Jens

    only biogas production rate was 14 measured which complicates the analysis considerably. We show product is methane. In recent years more and more complex mathematical models of anaerobic 26 digestion. Yet in many ex- 36 perimental settings only biogas production rate data is available which complicates

  6. Reaction Rate Sensitivity of the gamma-Process Path

    E-Print Network [OSTI]

    T. Rauscher

    2004-07-16T23:59:59.000Z

    The location of the (gamma,p)/(gamma,n) and (gamma,alpha)/(gamma,n) line at gamma-process temperatures is discussed, using recently published reaction rates based on global Hauser-Feshbach calculations. The results can directly be compared to previously published, classic gamma-process discussions. The nuclei exhibiting the largest sensitivity to uncertainties in nuclear structure and reaction parameters are specified.

  7. adaptive parameter estimation: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tokamak Heat Computer Technologies and Information Sciences Websites Summary: . Keywords: Thermonuclear fusion, distributed parameter systems, input state and parameter estimation,...

  8. Rate Control Management of Atrial Fibrillation: May a Mathematical Model Suggest an Ideal Heart Rate?

    E-Print Network [OSTI]

    Anselmino, Matteo; Camporeale, Carlo; Saglietto, Andrea; Gaita, Fiorenzo; Ridolfi, Luca

    2015-01-01T23:59:59.000Z

    Background. Despite the routine prescription of rate control therapy for atrial fibrillation (AF), clinical evidence demonstrating a heart rate target is lacking. Aim of the present study was to run a mathematical model simulating AF episodes with a different heart rate (HR) to predict hemodynamic parameters for each situation. Methods. The lumped model, representing the pumping heart together with systemic and pulmonary circuits, was run to simulate AF with HR of 50, 70, 90, 110 and 130 bpm, respectively. Results. Left ventricular pressure increased by 56.7%, from 33.92+-37.56 mmHg to 53.15+-47.56 mmHg, and mean systemic arterial pressure increased by 27.4%, from 82.66+-14.04 mmHg to 105.29+-7.63 mmHg, at the 50 and 130 bpm simulations, respectively. Stroke volume (from 77.45+-8.5 to 39.09+-8.08 mL), ejection fraction (from 61.1+-4.4 to 39.32+-5.42%) and stroke work (SW, from 0.88+-0.04 to 0.58+-0.09 J) decreased by 49.5, 35.6 and 34.2%, at the 50 and 130 bpm simulations, respectively. In addition, oxygen co...

  9. Pico: Parameters for the Impatient Cosmologist

    E-Print Network [OSTI]

    William A. Fendt; Benjamin D. Wandelt

    2006-06-29T23:59:59.000Z

    We present a fast, accurate, robust and flexible method of accelerating parameter estimation. This algorithm, called Pico, can compute the CMB power spectrum and matter transfer function as well as any computationally expensive likelihoods in a few milliseconds. By removing these bottlenecks from parameter estimation codes, Pico decreases their computational time by 1 or 2 orders of magnitude. Pico has several important properties. First, it is extremely fast and accurate over a large volume of parameter space. Furthermore, its accuracy can continue to be improved by using a larger training set. This method is generalizable to an arbitrary number of cosmological parameters and to any range of l-values in multipole space. Pico is approximately 3000 times faster than CAMB for flat models, and approximately 2000 times faster then the WMAP 3 year likelihood code. In this paper, we demonstrate that using Pico to compute power spectra and likelihoods produces parameter posteriors that are very similar to those using CAMB and the official WMAP3 code, but in only a fraction of the time. Pico and an interface to CosmoMC are made publicly available at http://www.astro.uiuc.edu/~bwandelt/pico/.

  10. Cosmological parameter estimation: impact of CMB aberration

    SciTech Connect (OSTI)

    Catena, Riccardo [Institut für Theoretische Physik, Friedrich-Hund-Platz 1, 37077 Göttingen (Germany); Notari, Alessio, E-mail: riccardo.catena@theorie.physik.uni-goettingen.de, E-mail: notari@ffn.ub.es [Departament de Física Fondamental i Institut de Ciéncies del Cosmos, Universitat de Barcelona, Martí i Franqués 1, 08028 Barcelona (Spain)

    2013-04-01T23:59:59.000Z

    The peculiar motion of an observer with respect to the CMB rest frame induces an apparent deflection of the observed CMB photons, i.e. aberration, and a shift in their frequency, i.e. Doppler effect. Both effects distort the temperature multipoles a{sub lm}'s via a mixing matrix at any l. The common lore when performing a CMB based cosmological parameter estimation is to consider that Doppler affects only the l = 1 multipole, and neglect any other corrections. In this paper we reconsider the validity of this assumption, showing that it is actually not robust when sky cuts are included to model CMB foreground contaminations. Assuming a simple fiducial cosmological model with five parameters, we simulated CMB temperature maps of the sky in a WMAP-like and in a Planck-like experiment and added aberration and Doppler effects to the maps. We then analyzed with a MCMC in a Bayesian framework the maps with and without aberration and Doppler effects in order to assess the ability of reconstructing the parameters of the fiducial model. We find that, depending on the specific realization of the simulated data, the parameters can be biased up to one standard deviation for WMAP and almost two standard deviations for Planck. Therefore we conclude that in general it is not a solid assumption to neglect aberration in a CMB based cosmological parameter estimation.

  11. Analysis of ISO NE Balancing Requirements: Uncertainty-based Secure Ranges for ISO New England Dynamic Inerchange Adjustments

    SciTech Connect (OSTI)

    Etingov, Pavel V.; Makarov, Yuri V.; Wu, Di; Hou, Zhangshuan; Sun, Yannan; Maslennikov, S.; Luo, X.; Zheng, T.; George, S.; Knowland, T.; Litvinov, E.; Weaver, S.; Sanchez, E.

    2013-01-31T23:59:59.000Z

    The document describes detailed uncertainty quantification (UQ) methodology developed by PNNL to estimate secure ranges of potential dynamic intra-hour interchange adjustments in the ISO-NE system and provides description of the dynamic interchange adjustment (DINA) tool developed under the same contract. The overall system ramping up and down capability, spinning reserve requirements, interchange schedules, load variations and uncertainties from various sources that are relevant to the ISO-NE system are incorporated into the methodology and the tool. The DINA tool has been tested by PNNL and ISO-NE staff engineers using ISO-NE data.

  12. Incentive Rates- At What Cost?

    E-Print Network [OSTI]

    Schaeffer, S. C.

    's impact. In fact, I doubt that one can truly know the exact impact of a rate even after its inclusion in a tariff, assuming of course, that someone uses it. My own judgment is that there are currently examples of both effective and not so effective... tem see a positive impact on their rates from any successes with this tariff, over the expected life of the new facility. We did not count societal benefits like high tax bases for local authorities when reviewing existing ratepayer benefit - only...

  13. Rate Schedules | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO Overview OCHCO Overview OCHCODepartmentEnergy April 20138Rate Schedules Rate Schedules

  14. Constraining Orbital Parameters Through Planetary Transit Monitoring

    E-Print Network [OSTI]

    Stephen R. Kane; Kaspar von Braun

    2008-08-13T23:59:59.000Z

    The orbital parameters of extra-solar planets have a significant impact on the probability that the planet will transit the host star. This was recently demonstrated by the transit detection of HD 17156b whose favourable eccentricity and argument of periastron dramatically increased its transit likelihood. We present a study which provides a quantitative analysis of how these two orbital parameters affect the geometric transit probability as a function of period. Further, we apply these results to known radial velocity planets and show that there are unexpectedly high transit probabilities for planets at relatively long periods. For a photometric monitoring campaign which aims to determine if the planet indeed transits, we calculate the expected transiting planet yield and the significance of a potential null result, as well as the subsequent constraints that may be applied to orbital parameters.

  15. Particle-hole symmetry parameters for nuclei

    E-Print Network [OSTI]

    Ian Bentley

    2015-03-10T23:59:59.000Z

    Two parameters, nu and zeta, motivated by particle-hole symmetry are introduced. These parameters are determined using the number of proton (or neutron) particles and holes counted from neighboring shell closures. The new parameters can be used to evaluate particle-hole and proton-neutron symmetries of adopted B(E2) values, which indicate that both symmetries are approximate for A>100. The combined symmetries motivate empirical fits of binding energies and the energy ratio E(4_1^+)/E(2_1^+). A global binding energy fit consisting of a traditional liquid droplet and one new shell term, comprised of a function of nu and zeta, reproduces the experimental binding energies of 2353 nuclei with an r.m.s. standard deviation of 1.55 MeV.

  16. Parameter Estimation of Gravitational Waves from Precessing BH-NS Inspirals with higher harmonics

    E-Print Network [OSTI]

    R. O'Shaughnessy; B. Farr; E. Ochsner; H. S. Cho; V. Raymond; C. Kim; C. H. Lee

    2014-04-11T23:59:59.000Z

    Precessing black hole-neutron star (BH-NS) binaries produce a rich gravitational wave signal, encoding the binary's nature and inspiral kinematics. Using the lalinference\\_mcmc Markov-chain Monte Carlo parameter estimation code, we use two fiducial examples to illustrate how the geometry and kinematics are encoded into the modulated gravitational wave signal, using coordinates well-adapted to precession. Even for precessing binaries, we show the performance of detailed parameter estimation can be estimated by "effective" estimates: comparisons of a prototype signal with its nearest neighbors, adopting a fixed sky location and idealized two-detector network. We use detailed and effective approaches to show higher harmonics provide nonzero but small local improvement when estimating the parameters of precessing BH-NS binaries. That said, we show higher harmonics can improve parameter estimation accuracy for precessing binaries ruling out approximately-degenerate source orientations. Our work illustrates quantities gravitational wave measurements can provide, such as reliable component masses and the precise orientation of a precessing short gamma ray burst progenitor relative to the line of sight. "Effective" estimates may provide a simple way to estimate trends in the performance of parameter estimation for generic precessing BH-NS binaries in next-generation detectors. For example, our results suggest that the orbital chirp rate, precession rate, and precession geometry are roughly-independent observables, defining natural variables to organize correlations in the high-dimensional BH-NS binary parameter space.

  17. Empirical Earth rotation model: a consistent way to evaluate Earth orientation parameters

    E-Print Network [OSTI]

    L. Petrov

    2006-11-26T23:59:59.000Z

    It is customary to perform analysis of the Earth's rotation in two steps: first, to present results of estimation of the Earth orientation parameters in the form of time series based on a simplified model of variations of the Earth's rotation for a short period of time, and then to process this time series of adjustments by applying smoothing, re-sampling and other numerical algorithms. Although this approach saves computational time, it suffers from self-inconsistency: total Earth orientation parameters depend on a subjective choice of the apriori Earth orientation model, cross-correlations between points of time series are lost, and results of an operational analysis per se have a limited use for end users. An alternative approach of direct estimation of the coefficients of expansion of Euler angle perturbations into basis functions is developed. These coefficients describe the Earth's rotation over entire period of observations and are evaluated simultaneously with station positions, source coordinates and other parameters in a single LSQ solution. In the framework of this approach considerably larger errors in apriori EOP model are tolerated. This approach gives a significant conceptual simplification of representation of the Earth's rotation.

  18. A Distributed Power Control and Transmission Rate Allocation Algorithm over Multiple Channels

    E-Print Network [OSTI]

    Charalambous, Themistoklis

    2011-01-01T23:59:59.000Z

    In this paper, we consider multiple channels and wireless nodes with multiple transceivers. Each node assigns one transmitter at each available channel. For each assigned transmitter the node decides the power level and data rate of transmission in a distributed fashion, such that certain Quality of Service (QoS) demands for the wireless node are satisfied. More specifically, we investigate the case in which the average SINR over all channels for each communication pair is kept above a certain threshold. A joint distributed power and rate control algorithm for each transmitter is proposed that dynamically adjusts the data rate to meet a target SINR at each channel, and to update the power levels allowing for variable desired SINRs. The algorithm is fully distributed and requires only local interference measurements. The performance of the proposed algorithm is shown through illustrative examples.

  19. User's guide to SERICPAC: A computer program for calculating electric-utility avoided costs rates

    SciTech Connect (OSTI)

    Wirtshafter, R.; Abrash, M.; Koved, M.; Feldman, S.

    1982-05-01T23:59:59.000Z

    SERICPAC is a computer program developed to calculate average avoided cost rates for decentralized power producers and cogenerators that sell electricity to electric utilities. SERICPAC works in tandem with SERICOST, a program to calculate avoided costs, and determines the appropriate rates for buying and selling of electricity from electric utilities to qualifying facilities (QF) as stipulated under Section 210 of PURA. SERICPAC contains simulation models for eight technologies including wind, hydro, biogas, and cogeneration. The simulations are converted in a diversified utility production which can be either gross production or net production, which accounts for an internal electricity usage by the QF. The program allows for adjustments to the production to be made for scheduled and forced outages. The final output of the model is a technology-specific average annual rate. The report contains a description of the technologies and the simulations as well as complete user's guide to SERICPAC.

  20. Uncertainty analysis of multi-rate kinetics of uranium desorption from sediments

    SciTech Connect (OSTI)

    Zhang, Xiaoying; Liu, Chongxuan; Hu, Bill X.; Zhang, Guannan

    2014-01-01T23:59:59.000Z

    A multi-rate expression for uranyl [U(VI)] surface complexation reactions has been proposed to describe diffusion-limited U(VI) sorption/desorption in heterogeneous subsurface sediments. An important assumption in the rate expression is that its rate constants follow a certain type probability distribution. In this paper, a Bayes-based, Differential Evolution Markov Chain method was used to assess the distribution assumption and to analyze parameter and model structure uncertainties. U(VI) desorption from a contaminated sediment at the US Hanford 300 Area, Washington was used as an example for detail analysis. The results indicated that: 1) the rate constants in the multi-rate expression contain uneven uncertainties with slower rate constants having relative larger uncertainties; 2) the lognormal distribution is an effective assumption for the rate constants in the multi-rate model to simualte U(VI) desorption; 3) however, long-term prediction and its uncertainty may be significantly biased by the lognormal assumption for the smaller rate constants; and 4) both parameter and model structure uncertainties can affect the extrapolation of the multi-rate model with a larger uncertainty from the model structure. The results provide important insights into the factors contributing to the uncertainties of the multi-rate expression commonly used to describe the diffusion or mixing-limited sorption/desorption of both organic and inorganic contaminants in subsurface sediments.

  1. Dual order parameters and the deconfinement transition

    E-Print Network [OSTI]

    Christian S. Fischer; Jens A. Mueller

    2009-10-29T23:59:59.000Z

    We investigate the chiral and the deconfinement transition within the framework of Dyson-Schwinger equations using quenched lattice data for the temperature dependent gluon propagator as input. We extract corresponding order parameters from the Landau gauge quark propagator with U(1)-valued boundary conditions. We study the chiral transition using the conventional quark condensate, whereas for the deconfinement transition we determine the dual condensate ('dressed Polyakov loop'). In addition we consider an alternative order parameter for deconfinement, the dual scalar quark dressing function. As a result we find almost the same transition temperatures for the chiral and deconfinement transitions.

  2. Nuclear fusion in dense matter: Reaction rate and carbon burning

    E-Print Network [OSTI]

    L. R. Gasques; A. V. Afanasjev; E. F. Aguilera; M. Beard; L. C. Chamon; P. Ring; M. Wiescher; D. G. Yakovlev

    2005-06-16T23:59:59.000Z

    In this paper we analyze the nuclear fusion rate between equal nuclei for all five different nuclear burning regimes in dense matter (two thermonuclear regimes, two pycnonuclear ones, and the intermediate regime). The rate is determined by Coulomb barrier penetration in dense environments and by the astrophysical S-factor at low energies. We evaluate previous studies of the Coulomb barrier problem and propose a simple phenomenological formula for the reaction rate which covers all cases. The parameters of this formula can be varied, taking into account current theoretical uncertainties in the reaction rate. The results are illustrated for the example of the ^{12}C+^{12}C fusion reaction. This reaction is very important for the understanding of nuclear burning in evolved stars, in exploding white dwarfs producing type Ia supernovae, and in accreting neutron stars. The S-factor at stellar energies depends on a reliable fit and extrapolation of the experimental data. We calculate the energy dependence of the S-factor using a recently developed parameter-free model for the nuclear interaction, taking into account the effects of the Pauli nonlocality. For illustration, we analyze the efficiency of carbon burning in a wide range of densities and temperatures of stellar matter with the emphasis on carbon ignition at densities rho > 10^9 g/cc.

  3. Black nickel selective absorber, optimization of parameters

    SciTech Connect (OSTI)

    Akinoglu, B.; Cercioglu, V.; Ecevit, A.

    1983-12-01T23:59:59.000Z

    Electroplated black nickel selective absorber is one of the most commercially used element of solar energy systems. Electrodeposition parameters such as time of deposition, pH, current density, electrolyte temperature should be optimized to produce the most efficient selective absorber. The topology of the substrate material is very effective on selectivity and it should also be optimized. In this study, by controlling the conditions of electrodeposition black nickel selective absorbers are produced and their reflectivities are measured. The effects of the electrodeposition parameters together with the topology of the substrate, on the selective properties are investigated.

  4. Asteroseismology of delta Scuti stars - a parameter study and application to seismology of FG Virginis

    E-Print Network [OSTI]

    M. R. Templeton; S. Basu; P. Demarque

    2001-08-29T23:59:59.000Z

    We assess the potential of asteroseismology for determining the fundamental properties of individual $\\delta$ Scuti stars. We computed a grid of evolution and adiabatic pulsation models using the Yale Rotating Evolution Code to study the systematic changes in low-order ($\\ell = 0, 1, 2,$ and 3) modes as functions of fundamental stellar properties. Changes to the stellar mass, chemical composition, and convective core overshooting length change the observable pulsation spectrum significantly. In general, mass has the strongest effect on evolution and on pulsation, followed by the metal abundance. Changes to the helium content have very little effect on the frequencies until near the end of the main sequence. Changes to each of the four parameters change the $p$-mode frequencies more, both in absolute and relative terms, than they do the $g$- and mixed-mode frequencies, suggesting that these parameters have a greater effect on the outer layers of the star. We also present evolution and pulsation models of the well-studied star FG Virginis, outlining a possible method of locating favorable models in the stellar parameter space based upon a definitive identification of only two modes. Specifically, we plot evolution models on the (period-period ratio) and (temperature-period ratio) planes to select candidate models, and modify the core overshooting parameter to fit the observed star. For these tests, we adjusted only the mass, helium and metal abundances, and core overshooting parameter, but this method can be extended to include the effects of first-order rotational splitting and second-order rotational distortion of pulsation spectra.

  5. SU-E-I-95: Personalized Radiography Technical Parameters for Each Patient and Exam

    SciTech Connect (OSTI)

    Soares, F; Camozzato, T; Kahl, G; Soares, A; Zottis, A [Instituto Federal de Santa Catarina, Florianopolis (Brazil)

    2014-06-01T23:59:59.000Z

    Purpose: To determine exact electrical parameters (kV, mAs) a radiological technologist shall use taking account the exam and patient's structure, with guarantee of minimum dose and adequate quality image. Methods: A patient's absorbed dose equation was developed by means of Entrance Skin Dose (ESD), irradiated area and patient width for specific anatomy. ESD is calculated from a developed equation, where entrance surface air-KERMA and backscatter factor are included, with air-to-skin coefficient conversion. We developed specific Lambert-Beer attenuation equations derived from mass energy-absorption coefficients data for skin, fat, and muscle and bone as one tissue. Anatomy tissue thickness distribution at central X-ray location in anteroposterior incidence for hand and chest, was estimate by discounting constant skin and bone thickness from patient measured width, assuming the result as muscle and fat. A clinical research at a big hospital were executed when real parameters (kV, mAs, filtration, ripple) used by technologists were combined with the image quality and patient's data: anatomy width, height and weight. A correlation among the best images acquired and electrical parameters used were confronted with patient's data and dose estimation. The best combinations were used as gold standards. Results: For each anatomy, two equations were developed to calculate voltage (kV) and exposure (mAs) to reproduce and interpolate the gold standards. Patient is measured and data are input into equations, giving radiological technologists the right set of electrical parameters for that specific exam. Conclusion: This work indicates that radiological technologist can personalize the exact electrical parameters for each patient exam, instead of using standard values. It also guarantee that patients under or over-sized measures will receive the right dose for the best image. It will stop wrong empiric adjusts technologists do when examining a non-standard patient and reduce probability of radiography retaken because of over or under exposition.

  6. Instability statistics and mixing rates

    E-Print Network [OSTI]

    Roberto Artuso; Cesar Manchein

    2009-10-20T23:59:59.000Z

    We claim that looking at probability distributions of \\emph{finite time} largest Lyapunov exponents, and more precisely studying their large deviation properties, yields an extremely powerful technique to get quantitative estimates of polynomial decay rates of time correlations and Poincar\\'e recurrences in the -quite delicate- case of dynamical systems with weak chaotic properties.

  7. Fast repetition rate (FRR) flasher

    DOE Patents [OSTI]

    Kolber, Z.; Falkowski, P.

    1997-02-11T23:59:59.000Z

    A fast repetition rate (FRR) flasher is described suitable for high flash photolysis including kinetic chemical and biological analysis. The flasher includes a power supply, a discharge capacitor operably connected to be charged by the power supply, and a flash lamp for producing a series of flashes in response to discharge of the discharge capacitor. A triggering circuit operably connected to the flash lamp initially ionizes the flash lamp. A current switch is operably connected between the flash lamp and the discharge capacitor. The current switch has at least one insulated gate bipolar transistor for switching current that is operable to initiate a controllable discharge of the discharge capacitor through the flash lamp. Control means connected to the current switch for controlling the rate of discharge of the discharge capacitor thereby to effectively keep the flash lamp in an ionized state between successive discharges of the discharge capacitor. Advantageously, the control means is operable to discharge the discharge capacitor at a rate greater than 10,000 Hz and even up to a rate greater than about 250,000 Hz. 14 figs.

  8. Estimation and testing in targeted goup sequential covariate-adjusted randomized clinical trials

    E-Print Network [OSTI]

    Boyer, Edmond

    that A is binary and that Y is one-dimensional. Typical parameters of scientific interest are + = E{E(Y |A = 1, W) - E(Y |A = 0, W)} (additive scale, which we consider hereafter) or Ã? = log E{E(Y |A = 1, W)} - log E

  9. Dose rate dependence for different dosimeters and detectors: TLD, OSL, EBT films, and diamond detectors

    SciTech Connect (OSTI)

    Karsch, L.; Beyreuther, E.; Burris-Mog, T.; Kraft, S.; Richter, C.; Zeil, K.; Pawelke, J. [OncoRay-National Center for Radiation Research in Oncology, Technische Universitaet Dresden, Fetscherstr, 74, 01307 Dresden (Germany); Helmholtz-Zentrum Dresden-Rossendorf, Institute of Radiation Physics, P.O. Box 510119, 01314 Dresden (Germany); OncoRay-National Center for Radiation Research in Oncology, Technische Universitaet Dresden, Fetscherstr, 74, 01307 Dresden (Germany) and Helmholtz-Zentrum Dresden-Rossendorf, Institute of Radiation Physics, P.O. Box 510119, 01314 Dresden (Germany)

    2012-05-15T23:59:59.000Z

    Purpose: The use of laser accelerators in radiation therapy can perhaps increase the low number of proton and ion therapy facilities in some years due to the low investment costs and small size. The laser-based acceleration technology leads to a very high peak dose rate of about 10{sup 11} Gy/s. A first dosimetric task is the evaluation of dose rate dependence of clinical dosimeters and other detectors. Methods: The measurements were done at ELBE, a superconductive linear electron accelerator which generates electron pulses with 5 ps length at 20 MeV. The different dose rates are reached by adjusting the number of electrons in one beam pulse. Three clinical dosimeters (TLD, OSL, and EBT radiochromic films) were irradiated with four different dose rates and nearly the same dose. A faraday cup, an integrating current transformer, and an ionization chamber were used to control the particle flux on the dosimeters. Furthermore two diamond detectors were tested. Results: The dosimeters are dose rate independent up to 410{sup 9} Gy/s within 2% (OSL and TLD) and up to 1510{sup 9} Gy/s within 5% (EBT films). The diamond detectors show strong dose rate dependence. Conclusions: TLD, OSL dosimeters, and EBT films are suitable for pulsed beams with a very high pulse dose rate like laser accelerated particle beams.

  10. Designing, implementing and monitoring social impact mitigation strategies: Lessons from Forest Industry Structural Adjustment Packages

    SciTech Connect (OSTI)

    Loxton, Edwina A., E-mail: Edwina.Loxton@anu.edu.au [Fenner School of Environment and Society, The Australian National University, Canberra, 0200 (Australia); Schirmer, Jacki, E-mail: Jacki.Schirmer@canberra.edu.au [Fenner School of Environment and Society, The Australian National University, Canberra, 0200 (Australia) [Fenner School of Environment and Society, The Australian National University, Canberra, 0200 (Australia); Cooperative Research Centre for Forestry, Hobart, 7001 (Australia); Kanowski, Peter, E-mail: P.Kanowski@cgiar.org [Fenner School of Environment and Society, The Australian National University, Canberra, 0200 (Australia) [Fenner School of Environment and Society, The Australian National University, Canberra, 0200 (Australia); Cooperative Research Centre for Forestry, Hobart, 7001 (Australia)

    2013-09-15T23:59:59.000Z

    Social impact mitigation strategies are implemented by the proponents of policies and projects with the intent of reducing the negative, and increasing the positive social impacts of their activities, and facilitating the achievement of policy/project goals. Evaluation of mitigation strategies is critical to improving their future success and cost-effectiveness. This paper evaluates two Forest Industry Structural Adjustment Packages (FISAP) implemented in Australia in the 1990s to 2000s as part of broader policy changes that reduced access to timber from publicly owned native forests. It assesses the effectiveness of the structure, design, implementation and monitoring of the FISAPs, and highlights the interactions between these four elements and their influence on social impacts. The two FISAPs were found to be effective in terms of reducing negative impacts, encouraging positive impacts and contributing towards policy goals, although they did not mitigate negative impacts in all cases, and sometimes interacted with external factors and additional policy changes to contribute to significant short and long term negative impacts. -- Highlights: ? Mitigation strategies aim to reduce negative and enhance positive social impacts ? Mitigation strategy design, implementation, and monitoring are critical to success ? Effective mitigation enhanced the capacity of recipients to respond to change ? Mitigation strategies influenced multiple interacting positive and negative impacts ? Success required good communication, transparency, support, resources and timing.

  11. UPDATING THE FREIGHT TRUCK STOCK ADJUSTMENT MODEL: 1997 VEHICLE INVENTORY AND USE SURVEY DATA

    SciTech Connect (OSTI)

    Davis, S.C.

    2000-11-16T23:59:59.000Z

    The Energy Information Administration's (EIA's) National Energy Modeling System (NEMS) Freight Truck Stock Adjustment Model (FTSAM) was created in 1995 relying heavily on input data from the 1992 Economic Census, Truck Inventory and Use Survey (TIUS). The FTSAM is part of the NEMS Transportation Sector Model, which provides baseline energy projections and analyzes the impacts of various technology scenarios on consumption, efficiency, and carbon emissions. The base data for the FTSAM can be updated every five years as new Economic Census information is released. Because of expertise in using the TIUS database, Oak Ridge National Laboratory (ORNL) was asked to assist the EIA when the new Economic Census data were available. ORNL provided the necessary base data from the 1997 Vehicle Inventory and Use Survey (VIUS) and other sources to update the FTSAM. The next Economic Census will be in the year 2002. When those data become available, the EIA will again want to update the FTSAM using the VIUS. This report, which details the methodology of estimating and extracting data from the 1997 VIUS Microdata File, should be used as a guide for generating the data from the next VIUS so that the new data will be as compatible as possible with the data in the model.

  12. Comparison of Two Foreign Body Retrieval Devices with Adjustable Loops in a Swine Model

    SciTech Connect (OSTI)

    Konya, Andras [University of Texas M. D. Anderson Cancer Center, Section of Interventional Radiology, Division of Diagnostic Imaging (United States)], E-mail: akonya@mdanderson.org

    2006-12-15T23:59:59.000Z

    The purpose of the study was to compare two similar foreign body retrieval devices, the Texan{sup TM} (TX) and the Texan LONGhorn{sup TM} (TX-LG), in a swine model. Both devices feature a {<=}30-mm adjustable loop. Capture times and total procedure times for retrieving foreign bodies from the infrarenal aorta, inferior vena cava, and stomach were compared. All attempts with both devices (TX, n = 15; TX-LG, n = 14) were successful. Foreign bodies in the vasculature were captured quickly using both devices (mean {+-} SD, 88 {+-} 106 sec for TX vs 67 {+-} 42 sec for TX-LG) with no significant difference between them. The TX-LG, however, allowed significantly better capture times than the TX in the stomach (p = 0.022), Overall, capture times for the TX-LG were significantly better than for the TX (p = 0.029). There was no significant difference between the total procedure times in any anatomic region. TX-LG performed significantly better than the TX in the stomach and therefore overall. The better torque control and maneuverability of TX-LG resulted in better performance in large anatomic spaces.

  13. Parameters of charmonium states from KEDR

    E-Print Network [OSTI]

    Aulchenko, V M; Barladyan, A K; Barnyakov, A Yu; Barnyakov, M Yu; Baru, S E; Basok, I Yu; Batrakov, A M; Blinov, A E; Blinov, V E; Bobrov, A V; Bobrovnikov, V S; Bogomyagkov, A V; Bondar, A E; Buzykaev, A R; Eidelman, S I; Grigoriev, D N; Groshev, V R; Glukhovchenko, Yu M; Gulevich, V V; Gusev, D V; Karnaev, S E; Karpov, G V; Karpov, S V; Kharlamova, T A; Kiselev, V A; Kolmogorov, V V; Kononov, S A; Kotov, K Yu; Kravchenko, E A; Kudryavtsev, V N; Kulikov, V F; Kurkin, G Ya; Kuper, E A; Kuyanov, I A; Levichev, E B; Maksimov, D A; Malyshev, V M; Maslennikov, A L; Meshkov, O I; Mishnev, S I; Morozov, I I; Muchnoi, N Yu; Neufeld, V V; Nikitin, S A; Nikolaev, I B; Okunev, I N; Onuchin, A P; Oreshkin, S B; Orlov, I O; Osipov, A A; Ovtin, I V; Peleganchuk, S V; Pivovarov, S G; Piminov, P A; Petrov, V V; Poluektov, A O; Prisekin, V G; Rezanova, O L; Ruban, A A; Sandyrev, V K; Savinov, G A; Shamov, A G; Shatilov, D N; Shwartz, B A; Simonov, E A; Sinyatkin, S V; Skrinsky, A N; Sokolov, A V; Sukharev, A M; Starostina, E V; Talyshev, A A; Tayursky, V A; Telnov, V I; Tikhonov, Yu A; Todyshev, K Yu; Tumaikin, G M; Usov, Yu V; Vorobiov, A I; Zhilich, V N; Zhulanov, V V; Zhuravlev, A N

    2013-01-01T23:59:59.000Z

    We report results of experiments performed with the KEDR detector at the VEPP-4M $e^+e^-$ collider. They include final results for the mass and other parameters of the $J/\\psi$, $\\psi(2S)$ and $\\psi(3770)$ and $J/\\psi\\to\\gamma\\eta_c$ branching fraction determination.

  14. Models and parameters for environmental radiological assessments

    SciTech Connect (OSTI)

    Miller, C W [ed.] [ed.

    1984-01-01T23:59:59.000Z

    This book presents a unified compilation of models and parameters appropriate for assessing the impact of radioactive discharges to the environment. Models examined include those developed for the prediction of atmospheric and hydrologic transport and deposition, for terrestrial and aquatic food-chain bioaccumulation, and for internal and external dosimetry. Chapters have been entered separately into the data base. (ACR)

  15. PARAMETER ESTIMATION IN PETROLEUM AND GROUNDWATER MODELING

    E-Print Network [OSTI]

    Ewing, Richard E.

    PARAMETER ESTIMATION IN PETROLEUM AND GROUNDWATER MODELING R.E. Ewing, M.S. Pilant, J.G. Wade the location and subsequent remediation of contaminants in groundwater to the optimization of production on grand challenge problems. In today's petroleum industry, reservoir simulators are routinely used

  16. Modeling and Parameter Estimation of Interpenetrating

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    Modeling and Parameter Estimation of Interpenetrating Polymer Network ProcessPolymer Network, PA 15213 #12;Interpenetrating Polymer Network Processp g y Monomer Initiator P l i ti tPolymerization reactor Seed particle Monomer droplet Aqueous mediaq Seed Polymer A Monomer B Seed Polymer A 2Fig 1. Seed

  17. SWOT Satellite Mission: Combined State Parameter Estimation

    E-Print Network [OSTI]

    Washington at Seattle, University of

    -parameter estimation problem Data assimilation experiments ­ Water depth ­ Discharge ­ Channel width ­ Roughness coefficient #12;3 Need for a surface water mission Importance to hydrology ­ gauge measurements insufficient hydraulics Amazon Siberia Ohio #12;4 Global gauge measurements #12;5 SWOT Technology These surface water

  18. On the postglacial isostatic adjustment of the British Isles and the shallow viscoelastic structure of the Earth

    E-Print Network [OSTI]

    Peltier, W. Richard

    of the Earth W. R. Peltier,1 I. Shennan,2 R. Drummond1 and B. Horton2 1 Department of Physics, University viscoelastic theory of the glacial isostatic adjustment (GIA) process, most recently reviewed in Peltier (1998a on the inverse problem for mantle viscosity (see the papers by Peltier 1998b and Wieczerkowski et al. 1999

  19. Post-traumatic stress symptons, college adjustment, and drug use in response to trauma and the September 11th attacks

    E-Print Network [OSTI]

    Reck, Jennifer Kaye

    2013-02-22T23:59:59.000Z

    who are far-removed from an event can experience PTSD symptoms. Trauma has also been found to make adjustment to college more difficult and increase drug and alcohol use. Previous trauma can also adversely affect one's reaction to traumatic events...

  20. Comparing Two Types of Magnetically- Coupled Adjustable Speed Drives with Variable Frequency Drives in Pump and Fan Applications

    E-Print Network [OSTI]

    Anderson, K. J.; Chvala, W. D.

    This paper presents the results from laboratory tests on MagnaDrive Corporations fixed-magnet magnetically-coupled adjustable speed drive (MC-ASD) and Coyote Electronics electromagnetic MC-ASD as compared to a typical variable frequency drive (VFD...

  1. Electronic copy available at: http://ssrn.com/abstract=2065816 Ultimate Ownership Structure and Bank Regulatory Capital Adjustment

    E-Print Network [OSTI]

    Boyer, Edmond

    their capital structure (debt/equity), firms in general and banks more specifically take control dilution costs into consideration, beyond the asymmetric information and transaction costs considered in prior research on capital and Bank Regulatory Capital Adjustment: Evidence from European Commercial Banks Laetitia Lepetita , Amine

  2. Instructions and Data Form for Local Authority Having Jurisdiction to Submit Adjustments to Default Outdoor Lighting Zones

    E-Print Network [OSTI]

    Outdoor Lighting Zones Adjustments to Default Outdoor Lighting Zones A local Authority Having Jurisdiction (AHJ) may officially adopt changes to the default Outdoor Lighting Zone designation of an area the proposed change. For example, the AHJ may determine areas where Outdoor Lighting Zone 4 is applicable

  3. Chlorophyll antenna size adjustments by irradiance in Dunaliella salina involve coordinate regulation of chlorophyll a oxygenase (CAO)

    E-Print Network [OSTI]

    Chlorophyll antenna size adjustments by irradiance in Dunaliella salina involve coordinate and that of the Lhcb genes in the model organism Dunaliella salina. Among the chlorophyll biosynthesis enzymes tested are a dynamic compensation response (Melis, 1996; 1998). When HL-acclimated cells of D. salina were shifted

  4. The influence of phosphorus nutrition and water stress on the osmotic adjustment and growth of loblolly pine

    E-Print Network [OSTI]

    Wilson, Alan Byron

    1985-01-01T23:59:59.000Z

    LITERATURE REVIEW Water Stress Osmotic Adjustment Phosphorus MATERIALS AND METHODS Experimental Design Sowing Preparation Sowing and Seedling Cultivation Treatments . . . . . . . ~ Measurements . . . . . . - ~ ~ ~ Statistical Analysis RESULTS... three days. Fertilizer was applied every other time the seedlings received water. Treatments were initiated to provide three levels of phos- phorus nutrition (10, 100, 200 ppm) and three levels of water stress. Water stress was imposed...

  5. Local Load Analysis with Periodic Time Series and Temperature Adjustment Marcelo Espinoza, Bart De Moor Caroline Joye Ronnie Belmans

    E-Print Network [OSTI]

    Time Series, Load Profiles, Temperature Sensitivity, Weather Adjustment 1 Introduction The quantitative, it is required to use indirect techniques to assess the type of demand they face [10, 11] in order to support their long-term investment planning. In this context, categories of residential, business and in- dustrial

  6. Fertility and rate of growth in a beef cattle herd in the 0rient of Venezuela 

    E-Print Network [OSTI]

    Gonzalez Crespo, Justo Nicolas

    1978-01-01T23:59:59.000Z

    status upon pregnancy rate in Venezuela. They calculated adjusted means of lactating and nonlactating cows to be 54. 3~~ and 89. 2~ respect. ively. Such results have been re- ported by . , everal authors in Bolivia (Plasse et aL. , 1975 and Bauer et a... and Huertas, 1974, in Colombia and Bauer, 1973, in Bolivia). Thc negative effect of lactation upon ferti. lity seems to be related to the plane of nutrition (IViltbank et al. , 1961, 1964; Villar et al, 1975; Stonaker et al, 1975 and Bazan et al. , 1975...

  7. Optimization of Operating Parameters for Minimum Mechanical Specific Energy in Drilling

    SciTech Connect (OSTI)

    Hamrick, Todd

    2011-05-25T23:59:59.000Z

    Efficiency in drilling is measured by Mechanical Specific Energy (MSE). MSE is the measure of the amount of energy input required to remove a unit volume of rock, expressed in units of energy input divided by volume removed. It can be expressed mathematically in terms of controllable parameters; Weight on Bit, Torque, Rate of Penetration, and RPM. It is well documented that minimizing MSE by optimizing controllable factors results in maximum Rate of Penetration. Current methods for computing MSE make it possible to minimize MSE in the field only through a trial-and-error process. This work makes it possible to compute the optimum drilling parameters that result in minimum MSE. The parameters that have been traditionally used to compute MSE are interdependent. Mathematical relationships between the parameters were established, and the conventional MSE equation was rewritten in terms of a single parameter, Weight on Bit, establishing a form that can be minimized mathematically. Once the optimum Weight on Bit was determined, the interdependent relationship that Weight on Bit has with Torque and Penetration per Revolution was used to determine optimum values for those parameters for a given drilling situation. The improved method was validated through laboratory experimentation and analysis of published data. Two rock types were subjected to four treatments each, and drilled in a controlled laboratory environment. The method was applied in each case, and the optimum parameters for minimum MSE were computed. The method demonstrated an accurate means to determine optimum drilling parameters of Weight on Bit, Torque, and Penetration per Revolution. A unique application of micro-cracking is also presented, which demonstrates that rock failure ahead of the bit is related to axial force more than to rotation speed.

  8. Theoretical mass loss rates of cool main-sequence stars

    E-Print Network [OSTI]

    V. Holzwarth; M. Jardine

    2006-11-14T23:59:59.000Z

    We develop a model for the wind properties of cool main-sequence stars, which comprises their wind ram pressures, mass fluxes, and terminal wind velocities. The wind properties are determined through a polytropic magnetised wind model, assuming power laws for the dependence of the thermal and magnetic wind parameters on the stellar rotation rate. We use empirical data to constrain theoretical wind scenarios, which are characterised by different rates of increase of the wind temperature, wind density, and magnetic field strength. Scenarios based on moderate rates of increase yield wind ram pressures in agreement with most empirical constraints, but cannot account for some moderately rotating targets, whose high apparent mass loss rates are inconsistent with observed coronal X-ray and magnetic properties. For fast magnetic rotators, the magneto-centrifugal driving of the outflow can produce terminal wind velocities far in excess of the surface escape velocity. Disregarding this aspect in the analyses of wind ram pressures leads to overestimations of stellar mass loss rates. The predicted mass loss rates of cool main-sequence stars do not exceed about ten times the solar value. Our results are in contrast with previous investigations, which found a strong increase of the stellar mass loss rates with the coronal X-ray flux. Owing to the weaker dependence, we expect the impact of stellar winds on planetary atmospheres to be less severe and the detectability of magnetospheric radio emission to be lower then previously suggested. Considering the rotational evolution of a one solar-mass star, the mass loss rates and the wind ram pressures are highest during the pre-main sequence phase.

  9. Intraclass Price Elasticity & Electric Rate Design 

    E-Print Network [OSTI]

    Gresham, K. E.

    1987-01-01T23:59:59.000Z

    Electric rate design relies on cost incurrance for pricing and pricing structures. However, as utilities move into a marketing mode, rate design needs to respond more to customer reactions to pricing changes. Intraclass price elasticities aid rate...

  10. October 1996 - September 2001 Wholesale Power Rates (rates/previous)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for RenewableSpeeding accessSpeedingOctober 1996 - September 2001 The rates BPA charges

  11. October 2001 - March 2002 Power Rates (rates/previous)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for RenewableSpeeding accessSpeedingOctober 1996 - September 2001 The rates BPA charges1

  12. October 2001 - September 2006 Wholesale Power Rates (rates/previous)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for RenewableSpeeding accessSpeedingOctober 1996 - September 2001 The rates BPA charges11

  13. October 2002 - March 2003 Power Rates (rates/previous)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for RenewableSpeeding accessSpeedingOctober 1996 - September 2001 The rates BPA2 - March

  14. October 2003 - March 2004 Power Rates (rates/previous)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for RenewableSpeeding accessSpeedingOctober 1996 - September 2001 The rates BPA2 - March3

  15. October 2004 - March 2005 Power Rates (rates/previous)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for RenewableSpeeding accessSpeedingOctober 1996 - September 2001 The rates BPA2 -

  16. October 2005 - March 2006 Power Rates (rates/previous)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for RenewableSpeeding accessSpeedingOctober 1996 - September 2001 The rates BPA2 -5 -

  17. Geoelectrical Measurement of Multi-Scale Mass Transfer Parameters

    SciTech Connect (OSTI)

    Day-Lewis, Frederick; Singha, Kamini; Haggerty, Roy; Johnson, Tim; Binley, Andrew; Lane, John

    2014-01-16T23:59:59.000Z

    Mass transfer affects contaminant transport and is thought to control the efficiency of aquifer remediation at a number of sites within the Department of Energy (DOE) complex. An improved understanding of mass transfer is critical to meeting the enormous scientific and engineering challenges currently facing DOE. Informed design of site remedies and long-term stewardship of radionuclide-contaminated sites will require new cost-effective laboratory and field techniques to measure the parameters controlling mass transfer spatially and across a range of scales. In this project, we sought to capitalize on the geophysical signatures of mass transfer. Previous numerical modeling and pilot-scale field experiments suggested that mass transfer produces a geoelectrical signature—a hysteretic relation between sampled (mobile-domain) fluid conductivity and bulk (mobile + immobile) conductivity—over a range of scales relevant to aquifer remediation. In this work, we investigated the geoelectrical signature of mass transfer during tracer transport in a series of controlled experiments to determine the operation of controlling parameters, and also investigated the use of complex-resistivity (CR) as a means of quantifying mass transfer parameters in situ without tracer experiments. In an add-on component to our grant, we additionally considered nuclear magnetic resonance (NMR) to help parse mobile from immobile porosities. Including the NMR component, our revised study objectives were to: 1. Develop and demonstrate geophysical approaches to measure mass-transfer parameters spatially and over a range of scales, including the combination of electrical resistivity monitoring, tracer tests, complex resistivity, nuclear magnetic resonance, and materials characterization; and 2. Provide mass-transfer estimates for improved understanding of contaminant fate and transport at DOE sites, such as uranium transport at the Hanford 300 Area. To achieve our objectives, we implemented a 3-part research plan involving (1) development of computer codes and techniques to estimate mass-transfer parameters from time-lapse electrical data; (2) bench-scale experiments on synthetic materials and materials from cores from the Hanford 300 Area; and (3) field demonstration experiments at the DOE’s Hanford 300 Area. In a synergistic add-on to our workplan, we analyzed data from field experiments performed at the DOE Naturita Site under a separate DOE SBR grant, on which PI Day-Lewis served as co-PI. Techniques developed for application to Hanford datasets also were applied to data from Naturita. 1. Introduction The Department of Energy (DOE) faces enormous scientific and engineering challenges associated with the remediation of legacy contamination at former nuclear weapons production facilities. Selection, design and optimization of appropriate site remedies (e.g., pump-and-treat, biostimulation, or monitored natural attenuation) requires reliable predictive models of radionuclide fate and transport; however, our current modeling capabilities are limited by an incomplete understanding of multi-scale mass transfer—its rates, scales, and the heterogeneity of controlling parameters. At many DOE sites, long “tailing” behavior, concentration rebound, and slower-than-expected cleanup are observed; these observations are all consistent with multi-scale mass transfer [Haggerty and Gorelick, 1995; Haggerty et al., 2000; 2004], which renders pump-and-treat remediation and biotransformation inefficient and slow [Haggerty and Gorelick, 1994; Harvey et al., 1994; Wilson, 1997]. Despite the importance of mass transfer, there are significant uncertainties associated with controlling parameters, and the prevalence of mass transfer remains a point of debate [e.g., Hill et al., 2006; Molz et al., 2006] for lack of experimental methods to verify and measure it in situ or independently of tracer breakthrough. There is a critical need for new field-experimental techniques to measure mass transfer in-situ and estimate multi-scale and spatially variable mass-transfer parame

  18. Molecular-Genetic Analysis of Osmoregulation, Osmotic Adjustment and Growth in Arabidopsis

    SciTech Connect (OSTI)

    Elizabeth Bray

    2009-05-04T23:59:59.000Z

    The molecular mechanism by which plants control cellular solute and water content, called osmoregulation, is critical for cell expansion and survival, particularly in response to cellular water deficit or low water potential. Two loci, lwr1 and lwr2 (low water potential response), that affect osmoregulation were isolated as part of a larger screen to identify mutants with alterations in low water potential-induced proline accumulation. When seedlings of lwr2 were exposed to a steady low water potential stress over a period of several days using PEG-infused agar plates, the mutants had lesser proline accumulation and osmotic adjustment than the wild type, Ben. A mapping population was raised but it was not possible to reliably identify the mutants in the population and thus could not be used for mapping. The mutant lwr1 was mapped and the gene identified. The mutant lwr1 had greater accumulation of proline, higher total solute content, greater osmotic adjustment at low water potential, altered abscisic acid content, and increased sensitivity to applied abscisic acid with respect to Pro content than the wild type, Ben, when the water potential was decreased over a period of several days using PEG-infused agar plates. lwr1 also had altered growth and morphology, including defects in trichome branching with the majority of the trichomes having a single point, shortened siliques which were crooked, and significantly lengthened time to flowering. Using bulk segregant analysis, the lwr1 loci was mapped to the lower arm of chromosome II, near the marker nga168. Further detailed fine mapping located the mutation to the gene PKL, At2g25170, which was previously identified as a gene involved in altered root development. PKL encodes a chromatin remodeling factor. The mutation in lwr1 introduced a stop codon in the 14th exon of At2g25170. The mutant was not complemented by 4 other known mutants having a disrupted PKL gene confirming the placement of this mutation in lwr1. In response to ABA treatment, lwr1 and 5 different mutants in At2g25170, in two different genetic backgrounds, had elevated proline content compared to the wild type. Proline levels of lwr1 in response to water-deficit were not the same as in the originally published mutant; lwr1 and other mutants in At2g25170 had lower proline content than wild type in response to water deficit. A series of microarray hybridizations have been completed comparing control and PEG-induced stress in lwr1, lwr2 and the wild type. Analyses of these data are ongoing and are expected to shed light on the gene mutated in lwr2 and to indicate the extent of changed of gene expression that are involved in the response of lwr1 to water deficit stress. In addition, microarray experiments were completed on ABA treatments and ABA and stress treatments combined for lwr1 in order to further explore the role of ABA in plant water-deficit stress.

  19. Calibrated Hydrothermal Parameters, Barrow, Alaska, 2013

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Atchley, Adam; Painter, Scott; Harp, Dylan; Coon, Ethan; Wilson, Cathy; Liljedahl, Anna; Romanovsky, Vladimir

    A model-observation-experiment process (ModEx) is used to generate three 1D models of characteristic micro-topographical land-formations, which are capable of simulating present active thaw layer (ALT) from current climate conditions. Each column was used in a coupled calibration to identify moss, peat and mineral soil hydrothermal properties to be used in up-scaled simulations. Observational soil temperature data from a tundra site located near Barrow, AK (Area C) is used to calibrate thermal properties of moss, peat, and sandy loam soil to be used in the multiphysics Advanced Terrestrial Simulator (ATS) models. Simulation results are a list of calibrated hydrothermal parameters for moss, peat, and mineral soil hydrothermal parameters.

  20. UPRE method for total variation parameter selection

    SciTech Connect (OSTI)

    Wohlberg, Brendt [Los Alamos National Laboratory; Lin, Youzuo [Los Alamos National Laboratory

    2008-01-01T23:59:59.000Z

    Total Variation (TV) Regularization is an important method for solving a wide variety of inverse problems in image processing. In order to optimize the reconstructed image, it is important to choose the optimal regularization parameter. The Unbiased Predictive Risk Estimator (UPRE) has been shown to give a very good estimate of this parameter for Tikhonov Regularization. In this paper we propose an approach to extend UPRE method to the TV problem. However, applying the extended UPRE is impractical in the case of inverse problems such as de blurring, due to the large scale of the associated linear problem. We also propose an approach to reducing the large scale problem to a small problem, significantly reducing computational requirements while providing a good approximation to the original problem.

  1. Kaon [ital B] parameter with Wilson fermions

    SciTech Connect (OSTI)

    Gupta, R.; Daniel, D. (Los Alamos National Laboratory, T-8, MS-B285, Los Alamos, New Mexico 87545 (United States)); Kilcup, G.W. (Physics Department, Ohio State University, Columbus, Ohio 43210 (United States)); Patel, A. (Supercomputer Education and Research Centre and Centre for Theoretical Studies, Indian Institute of Science, Bangalore 560012 (India)); Sharpe, S.R. (Physics Department FM-15, University of Washington, Seattle, Washington 98195 (United States))

    1993-06-01T23:59:59.000Z

    We calculate the kaon [ital B] parameter in quenched lattice QCD at [beta]=6.0 using Wilson fermions at [kappa]=0.154 and 0.155. We use two kinds of nonlocal ( smeared'') sources for quark propagators to calculate the matrix elements between states of definite momentum. The use of smeared sources yields results with much smaller errors than obtained in previous calculations with Wilson fermions. By combining results for [bold p]=(0,0,0) and [bold p]=(0,0,1), we show that one can carry out the noperturbative subtraction necessary to remove the dominant lattice artifacts induced by the chiral-symmetry-breaking term in the Wilson action. Our final results are in good agreement with those obtained using staggered fermions. We also present results for [ital B] parameters of the [Delta][ital I]=3/2 part of the electromagnetic penguin operators, and preliminary results for [ital B][sub [ital K

  2. Surveillance of industrial processes with correlated parameters

    DOE Patents [OSTI]

    White, A.M.; Gross, K.C.; Kubic, W.L.; Wigeland, R.A.

    1996-12-17T23:59:59.000Z

    A system and method for surveillance of an industrial process are disclosed. The system and method includes a plurality of sensors monitoring industrial process parameters, devices to convert the sensed data to computer compatible information and a computer which executes computer software directed to analyzing the sensor data to discern statistically reliable alarm conditions. The computer software is executed to remove serial correlation information and then calculate Mahalanobis distribution data to carry out a probability ratio test to determine alarm conditions. 10 figs.

  3. PID Parameters Optimization by Using Genetic Algorithm

    E-Print Network [OSTI]

    Mirzal, Andri; Furukawa, Masashi

    2012-01-01T23:59:59.000Z

    Time delays are components that make time-lag in systems response. They arise in physical, chemical, biological and economic systems, as well as in the process of measurement and computation. In this work, we implement Genetic Algorithm (GA) in determining PID controller parameters to compensate the delay in First Order Lag plus Time Delay (FOLPD) and compare the results with Iterative Method and Ziegler-Nichols rule results.

  4. Increasing Communications Security through Protocol Parameter Diversity

    E-Print Network [OSTI]

    Forrest, Stephanie

    Rica, 2060 gbarrantes@ecci.ucr.ac.cr and Stephanie Forrest University of New Mexico, Department of Computer Science Albuquerque, New Mexico, 87131 forrest@cs.unm.edu Abstract Pulsing attacks use carefully synchronized high-rate low-duration bursts of traffic that are injected into a network to induce denial

  5. Inhalation Exposure Input Parameters for the Biosphere Model

    SciTech Connect (OSTI)

    M. Wasiolek

    2006-06-05T23:59:59.000Z

    This analysis is one of the technical reports that support the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), referred to in this report as the biosphere model. ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes in detail the conceptual model as well as the mathematical model and its input parameters. This report documents development of input parameters for the biosphere model that are related to atmospheric mass loading and supports the use of the model to develop biosphere dose conversion factors (BDCFs). The biosphere model is one of a series of process models supporting the total system performance assessment (TSPA) for a Yucca Mountain repository. ''Inhalation Exposure Input Parameters for the Biosphere Model'' is one of five reports that develop input parameters for the biosphere model. A graphical representation of the documentation hierarchy for the biosphere model is presented in Figure 1-1 (based on BSC 2006 [DIRS 176938]). This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling and how this analysis report contributes to biosphere modeling. This analysis report defines and justifies values of atmospheric mass loading for the biosphere model. Mass loading is the total mass concentration of resuspended particles (e.g., dust, ash) in a volume of air. Mass loading values are used in the air submodel of the biosphere model to calculate concentrations of radionuclides in air inhaled by a receptor and concentrations in air surrounding crops. Concentrations in air to which the receptor is exposed are then used in the inhalation submodel to calculate the dose contribution to the receptor from inhalation of contaminated airborne particles. Concentrations in air surrounding plants are used in the plant submodel to calculate the concentrations of radionuclides in foodstuffs contributed from uptake by foliar interception. This report is concerned primarily with the physical attributes of airborne particulate matter, such as the airborne concentrations of particles and their sizes. The conditions of receptor exposure (duration of exposure in various microenvironments), breathing rates, and dosimetry of inhaled particulates are discussed in more detail in ''Characteristics of the Receptor for the Biosphere Model'' (BSC 2005 [DIRS 172827]).

  6. Measuring Outdoor Air Intake Rates into Existing Building

    SciTech Connect (OSTI)

    Fisk, William; Sullivan, Douglas; Cohen, Sebastian; Han, Hwataik

    2009-04-16T23:59:59.000Z

    Practical and accurate technologies are needed for continuously measuring and controlling outdoor air (OA) intake rates in commercial building heating, ventilating, and air conditioning (HVAC) systems. This project evaluated two new measurement approaches. Laboratory experiments determined that OA flow rates were measurable with errors generally less than 10 percent using electronic air velocity probes installed between OA intake louver blades or at the outlet face of louvers. High accuracy was maintained with OA flow rates as low as 15 percent of the maximum for the louvers. Thus, with this measurement approach HVAC systems do not need separate OA intakes for minimum OA supply. System calibration parameters are required for each unique combination of louver type and velocity sensor location but calibrations are not necessary for each system installation. The research also determined that the accuracy of measuring OA flow rates with velocity probes located in the duct downstream of the intake louver was not improved by installing honeycomb airflow straighteners upstream of the probes. Errors varied with type of upstream louver, were as high as 100 percent, and were often greater than 25 percent. In conclusion, use of electronic air velocity probes between the blades of OA intake louvers or at the outlet face of louvers is a highly promising means of accurately measuring rates of OA flow into HVAC systems. The use of electronic velocity probes downstream of airflow straighteners is less promising, at least with the relatively small OA HVAC inlet systems employed in this research.

  7. Radionuclide release rates from spent fuel for performance assessment modeling

    SciTech Connect (OSTI)

    Curtis, D.B.

    1994-11-01T23:59:59.000Z

    In a scenario of aqueous transport from a high-level radioactive waste repository, the concentration of radionuclides in water in contact with the waste constitutes the source term for transport models, and as such represents a fundamental component of all performance assessment models. Many laboratory experiments have been done to characterize release rates and understand processes influencing radionuclide release rates from irradiated nuclear fuel. Natural analogues of these waste forms have been studied to obtain information regarding the long-term stability of potential waste forms in complex natural systems. This information from diverse sources must be brought together to develop and defend methods used to define source terms for performance assessment models. In this manuscript examples of measures of radionuclide release rates from spent nuclear fuel or analogues of nuclear fuel are presented. Each example represents a very different approach to obtaining a numerical measure and each has its limitations. There is no way to obtain an unambiguous measure of this or any parameter used in performance assessment codes for evaluating the effects of processes operative over many millennia. The examples are intended to suggest by example that in the absence of the ability to evaluate accuracy and precision, consistency of a broadly based set of data can be used as circumstantial evidence to defend the choice of parameters used in performance assessments.

  8. Enhancing parameter precision of optimal quantum estimation by direct quantum feedback

    E-Print Network [OSTI]

    Qiang Zheng; Li Ge; Yao Yao; Qi-jun Zhi

    2015-03-01T23:59:59.000Z

    Various schemes have been proposed to overcome the drawback of the decoherence on quantum-enhanced parameter estimation. Here we suggest an alternative method, quantum feedback, to enhance the parameter precision of optimal quantum estimation of a dissipative qubit by investigating its dynamics of quantum Fisher information. We find that compared with the case without feedback, the quantum Fisher information of the dissipative qubit in the case of feedback has a large maximum value in time evolution and a smaller decay rate in the long time.

  9. Models with time-dependent parameters using transform methods: application to Heston's model

    E-Print Network [OSTI]

    Elices, A

    2007-01-01T23:59:59.000Z

    This paper presents a methodology to introduce time-dependent parameters for a wide family of models preserving their analytic tractability. This family includes hybrid models with stochastic volatility, stochastic interest-rates, jumps and their non-hybrid counterparts. The methodology is applied to Heston's model. A bootstrapping algorithm is presented for calibration. A case study works out the calibration of the time-dependent parameters to the volatility surface of the Eurostoxx 50 index. The methodology is also applied to the analytic valuation of forward start vanilla options driven by Heston's model. This result is used to explore the forward skew of the case study.

  10. Direct Measurement of Supernova Neutrino Emission Parameters with a Gadolinium-Enhanced Super-Kamiokande Detector

    E-Print Network [OSTI]

    Hasan Yuksel; Shin'ichiro Ando; John Beacom

    2006-06-08T23:59:59.000Z

    The time-integrated luminosity and average energy of the neutrino emission spectrum are essential diagnostics of core-collapse supernovae. The SN 1987A electron antineutrino observations by the Kamiokande-II and IMB detectors are only roughly consistent with each other and theory. Using new measurements of the star formation rate history, we reinterpret the Super-Kamiokande upper bound on the electron antineutrino flux from all past supernovae as an excluded region in neutrino emission parameter space. A gadolinium-enhanced Super-Kamiokande should be able to jointly measure these parameters, and a future megaton-scale detector would enable precision studies.

  11. Radiatively Important Parameters Best Estimate (RIPBE): An ARM Value-Added Product

    SciTech Connect (OSTI)

    McFarlane, S; Shippert, T; Mather, J

    2011-06-30T23:59:59.000Z

    The Radiatively Important Parameters Best Estimate (RIPBE) VAP was developed to create a complete set of clearly identified set of parameters on a uniform vertical and temporal grid to use as input to a radiative transfer model. One of the main drivers for RIPBE was as input to the Broadband Heating Rate Profile (BBHRP) VAP, but we also envision using RIPBE files for user-run radiative transfer codes, as part of cloud/aerosol retrieval testbeds, and as input to averaged datastreams for model evaluation.

  12. Critical Performance and Durability Parameters of an Integrated...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Durability Parameters of an Integrated Aftertreatment System used to Meet Tier II Emission Standards Critical Performance and Durability Parameters of an Integrated...

  13. Key Parameters Affecting DPF Performance Degradation and Impact...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Parameters Affecting DPF Performance Degradation and Impact on Lifetime Fuel Economy Key Parameters Affecting DPF Performance Degradation and Impact on Lifetime Fuel Economy...

  14. affect colonization parameters: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and 'Tejada, M., A. 1. Borderfas, and F. Jimenez 3 Parameters Affecting Water Hammer Wave Attenuation, Shape by Anton Bergant1 Engineering Websites Summary: Parameters Affecting...

  15. Fair Labor Standards Act and Service Contract Act-Price Adjustment UT-B Contracts Div (Multiple Year and Option Contracts)

    E-Print Network [OSTI]

    Pennycook, Steve

    Fair Labor Standards Act and Service Contract Act-Price Adjustment UT-B Contracts Div (Multiple STANDARDS ACT AND SERVICE CONTRACT ACT - PRICE ADJUSTMENT (MULTIPLE YEAR AND OPTION CONTRACTS) (Sept 2009 is provided under this clause. (c) The wage determination, issued under the Service Contract Act of 1965

  16. Eric Gobe, "Deceptive Liberal Reforms: Institutional Adjustments and the Dynamics of Authoritarianism in Tunisia (19972005)", in Kienle Eberhard (ed.), Democracy Building & Democracy Erosion. Political

    E-Print Network [OSTI]

    Boyer, Edmond

    1 Eric Gobe, "Deceptive Liberal Reforms: Institutional Adjustments and the Dynamics Reforms: Institutional Adjustments and the Dynamics of Authoritarianism in Tunisia (1997­2005) Eric Gobe of political forces. In Ben Ali's Tunisia, the institutional reforms introduced in the 1990s

  17. Schonlau M., Van Soest A, Kapteyn A, Are `Webographic' or attitudinal questions useful for adjusting estimates from Web surveys using propensity scoring? Survey Research Methods,

    E-Print Network [OSTI]

    Schonlau, Matt

    for adjusting estimates from Web surveys using propensity scoring? Survey Research Methods, 2007, 1 (3), 155-163. Are `Webographic' or attitudinal questions useful for adjusting estimates from Web surveys using propensity scoring? Abstract Inference from Web surveys may be affected by non-random selection of Web survey participants. One

  18. a poorer food conversion efficiency and survival rate. The lower survival rate (87~) of this

    E-Print Network [OSTI]

    rate. 3. Survival and growth rates and food efficien- cies were excellent for trout reared in brackish

  19. Energy levels, radiative rates, and electron impact excitation rates for transitions in Li-like ions with 21?Z?28

    SciTech Connect (OSTI)

    Aggarwal, Kanti M., E-mail: K.Aggarwal@qub.ac.uk; Keenan, Francis P.

    2012-11-15T23:59:59.000Z

    We report calculations of energy levels, radiative rates, and electron impact excitation rates for transitions in Li-like ions with 21?Z?28. The General-Purpose Relativistic Atomic Structure Package is adopted for calculating energy levels and radiative rates, while for determining the collision strengths and subsequently the excitation rates, the Dirac Atomic R-matrix Code is used. Oscillator strengths, radiative rates, and line strengths are listed for all E1, E2, M1, and M2 transitions among the lowest 24 levels of the Li-like ions considered. Collision strengths have been averaged over a Maxwellian velocity distribution, and the effective collision strengths obtained are given over a wide temperature range up to 10{sup 7.8} K. Additionally, lifetimes are listed for all calculated levels of these ions. Finally, extensive comparisons are made with results available in the literature, as well as with our analogous calculations for all parameters with the Flexible Atomic Code, in order to assess the accuracy of the results.

  20. Energy levels, radiative rates, and electron impact excitation rates for transitions in Li-like ions with 12?Z?20

    SciTech Connect (OSTI)

    Aggarwal, Kanti M., E-mail: K.Aggarwal@qub.ac.uk; Keenan, Francis P.

    2013-03-15T23:59:59.000Z

    We report calculations of energy levels, radiative rates, and electron impact excitation rates for transitions in Li-like ions with 12?Z?20. The GRASP (general-purpose relativistic atomic structure package) is adopted for calculating energy levels and radiative rates, while for determining the collision strengths and subsequently the excitation rates, the Dirac atomic R-matrix code is used. Oscillator strengths, radiative rates, and line strengths are reported for all E1, E2, M1, and M2 transitions among the lowest 24 levels of the Li-like ions considered. Collision strengths have been averaged over a Maxwellian velocity distribution, and the effective collision strengths obtained are reported over a wide temperature range up to 10{sup 7.4} K. Additionally, lifetimes are also listed for all calculated levels of the ions. Finally, extensive comparisons are made with results available in the literature, as well as with our parallel calculations for all parameters with the Flexible Atomic Code, in order to assess the accuracy of the reported results.

  1. Parameter Analysis of the VPIN (Volume synchronized Probability of Informed Trading) Metric

    SciTech Connect (OSTI)

    Song, Jung Heon; Wu, Kesheng; Simon, Horst D.

    2014-03-01T23:59:59.000Z

    VPIN (Volume synchronized Probability of Informed trading) is a leading indicator of liquidity-induced volatility. It is best known for having produced a signal more than hours before the Flash Crash of 2010. On that day, the market saw the biggest one-day point decline in the Dow Jones Industrial Average, which culminated to the market value of $1 trillion disappearing, but only to recover those losses twenty minutes later (Lauricella 2010). The computation of VPIN requires the user to set up a handful of free parameters. The values of these parameters significantly affect the effectiveness of VPIN as measured by the false positive rate (FPR). An earlier publication reported that a brute-force search of simple parameter combinations yielded a number of parameter combinations with FPR of 7percent. This work is a systematic attempt to find an optimal parameter set using an optimization package, NOMAD (Nonlinear Optimization by Mesh Adaptive Direct Search) by Audet, le digabel, and tribes (2009) and le digabel (2011). We have implemented a number of techniques to reduce the computation time with NOMAD. Tests show that we can reduce the FPR to only 2percent. To better understand the parameter choices, we have conducted a series of sensitivity analysis via uncertainty quantification on the parameter spaces using UQTK (Uncertainty Quantification Toolkit). Results have shown dominance of 2 parameters in the computation of FPR. Using the outputs from NOMAD optimization and sensitivity analysis, We recommend A range of values for each of the free parameters that perform well on a large set of futures trading records.

  2. Combined Retrieval, Microphysical Retrievals and Heating Rates

    SciTech Connect (OSTI)

    Feng, Zhe

    2013-02-22T23:59:59.000Z

    Microphysical retrievals and heating rates from the AMIE/Gan deployment using the PNNL Combined Retrieval.

  3. An analysis of international grain freight rates 

    E-Print Network [OSTI]

    Jonnala, Sneha Latha

    1999-01-01T23:59:59.000Z

    of the dependent variable was included in the model as an explanatory variable. The estimated econometric model was designed to explain ocean freight rates for grain. Results indicate rates increase at a decreasing rate with distance and rates decrease at a...

  4. 7, 29612989, 2007 Predicting arene rate

    E-Print Network [OSTI]

    Boyer, Edmond

    software or computing power. Measured gas-phase rate coefficients for the reaction of aromatic hydrocarbons

  5. Composite Fringe Benefit Rates Nancy R. Lewis

    E-Print Network [OSTI]

    Wood, Marcelo A.

    January 1, 2015 Retirement Eligible FY 2014-15 Rate FY 2015-16 Rate FY 2016-17 Rate B Healthcomp Faculty of Research #12;New Rates · Provided by the Budget Office for use when planning proposal budgets for contract and grants · Effective for use in proposals submitted to sponsors January 1, 2015 and thereafter · Title

  6. Combined Retrieval, Microphysical Retrievals and Heating Rates

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Feng, Zhe

    Microphysical retrievals and heating rates from the AMIE/Gan deployment using the PNNL Combined Retrieval.

  7. Apparatus and methods for installing, removing and adjusting an inner turbine shell section relative to an outer turbine shell section

    DOE Patents [OSTI]

    Leach, David (Niskayuna, NY); Bergendahl, Peter Allen (Scotia, NY); Waldo, Stuart Forrest (Salem, NC); Smith, Robert Leroy (Milford, OH); Phelps, Robert Kim (Milford, OH)

    2001-01-01T23:59:59.000Z

    A turbine includes upper and lower inner shell sections mounting the nozzles and shrouds and which inner shell is supported by pins secured to a surrounding outer shell. To disassemble the turbine for access to the inner shell sections and rotor, an alignment fixture is secured to the lower outer shell section and has pins engaging the inner shell section. To disassemble the turbine, the inner shell weight is transferred to the lower outer shell section via the alignment fixture and cradle pins. Roller assemblies are inserted through access openings vacated by support pins to permit rotation of the lower inner shell section out of and into the lower outer shell section during disassembly and assembly. The alignment fixture includes adjusting rods for adjusting the inner shell axially, vertically, laterally and about a lateral axis. A roller over-cage is provided to rotate the inner shell and a dummy shell to facilitate assembly and disassembly in the field.

  8. Adjustment of ablation shapes and subwavelength ripples based on electron dynamics control by designing femtosecond laser pulse trains

    SciTech Connect (OSTI)

    Yuan Yanping; Jiang Lan; Li Xin; Wang Cong [Laser Micro/Nano-Fabrication Laboratory, School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081 (China); Lu Yongfeng [Department of Electrical Engineering, University of Nebraska-Lincoln, Lincoln, Nebraska 68588-0511 (United States)

    2012-11-15T23:59:59.000Z

    A quantum model is proposed to investigate femtosecond laser pulse trains processing of dielectrics by including the plasma model with the consideration of laser particle-wave duality. Central wavelengths (400 nm and 800 nm) strongly impact the surface plasmon field distribution, the coupling field intensity distribution (between the absorbed intensity and the surface plasma), and the distribution of transient localized free electron density in the material. This, in turn, significantly changes the localized transient optical/thermal properties during laser materials processing. The effects of central wavelengths on ablation shapes and subwavelength ripples are discussed. The simulation results show that: (1) ablation shapes and the spacing of subwavelength ripples can be adjusted by localized transient electron dynamics control using femtosecond laser pulse trains; (2) the adjustment of the radii of ablation shapes is stronger than that of the periods of subwavelength ripples.

  9. Resistive Wall Heating of the Undulator in High Repetition Rate

    SciTech Connect (OSTI)

    Qiang, J; Corlett, J; Emma, P; Wu, J

    2012-05-20T23:59:59.000Z

    In next generation high repetition rate FELs, beam energy loss due to resistive wall wakefields will produce significant amount of heat. The heat load for a superconducting undulator (operating at low temperature), must be removed and will be expensive to remove. In this paper, we study this effect in an undulator proposed for a Next Generation Light Source (NGLS) at LBNL. We benchmark our calculations with measurements at the LCLS and carry out detailed parameter studies using beam from a start-to-end simulation. Our preliminarym results suggest that the heat load in the undulator is about 2 W/m or lower with an aperture size of 6 mm for nominal NGLS preliminary design parameters.

  10. Property:OpenEI/UtilityRate/EnergyRateStructure/Tier6Rate | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkinsInformation DemandReactivePowerChargeInformation Rate Jump to: navigation,

  11. Adjusting Milk Replacer Intake During Heat Stress and Non-heat Stress as a Means of Improving Dairy Calf Performance

    E-Print Network [OSTI]

    Chavez, Theresa Marie

    2012-07-16T23:59:59.000Z

    ADJUSTING MILK REPLACER INTAKE DURING HEAT STRESS AND NON-HEAT STRESS AS A MEANS OF IMPROVING DAIRY CALF PERFORMANCE A Thesis by THERESA MARIE CHAVEZ Submitted to the Office of Graduate Studies of Texas A&M University... A Thesis by THERESA MARIE CHAVEZ Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE Approved by: Co-Chairs of Committee, Glenn Holub...

  12. Toward correcting drift in target position during radiotherapy via computer-controlled couch adjustments on a programmable Linac

    SciTech Connect (OSTI)

    McNamara, Joseph E.; Regmi, Rajesh; Michael Lovelock, D.; Yorke, Ellen D.; Mageras, Gig S. [Department of Medical Physics, Memorial Sloan-Kettering Cancer Center, New York, New York 10065 (United States); Goodman, Karyn A.; Rimner, Andreas [Department of Radiation Oncology, Memorial Sloan-Kettering Cancer Center, New York, New York 10065 (United States); Mostafavi, Hassan [Ginzton Technology Center, Varian Medical Systems, Palo Alto, California 94304 (United States)

    2013-05-15T23:59:59.000Z

    Purpose: Real-time tracking of respiratory target motion during radiation therapy is technically challenging, owing to rapid and possibly irregular breathing variations. The authors report on a method to predict and correct respiration-averaged drift in target position by means of couch adjustments on an accelerator equipped with such capability. Methods: Dose delivery is broken up into a sequence of 10 s field segments, each followed by a couch adjustment based on analysis of breathing motion from an external monitor as a surrogate of internal target motion. Signal averaging over three respiratory cycles yields a baseline representing target drift. A Kalman filter predicts the baseline position 5 s in advance, for determination of the couch correction. The method's feasibility is tested with a motion phantom programmed according to previously recorded patient signals. Computed couch corrections are preprogrammed into a research mode of an accelerator capable of computer-controlled couch translations synchronized with the motion phantom. The method's performance is evaluated with five cases recorded during hypofractionated treatment and five from respiration-correlated CT simulation, using a root-mean-squared deviation (RMSD) of the baseline from the treatment planned position. Results: RMSD is reduced in all 10 cases, from a mean of 4.9 mm (range 2.7-9.4 mm) before correction to 1.7 mm (range 0.7-2.3 mm) after correction. Treatment time is increased {approx}5% relative to that for no corrections. Conclusions: This work illustrates the potential for reduction in baseline respiratory drift with periodic adjustments in couch position during treatment. Future treatment machine capabilities will enable the use of 'on-the-fly' couch adjustments during treatment.

  13. Psychosocial adjustment of Mexican-American college students as a function of acculturation level: the melting pot vs. bicultural hypothesis

    E-Print Network [OSTI]

    Negy, Charles

    1990-01-01T23:59:59.000Z

    the child, whether or not the girl's education will be disrupted, etc. In addition to these problems, in traditional Mexican communities a strong stigma attaches to a pregnant unwedded adolescent and to her family, causing the parents to lose...PSYCHOSOCIAL ADJUSTMENT OF MEXICAN-AMERICAN COLLEGE STUDENTS AS A FUNCTION OF ACCULTURATION LEVEL: THE MELTING POT VS. BICULTURAL HYPOTHESIS A Thesis by CHARLES NEGY Submitted to the Office of Graduate Studies of Texas A&M University...

  14. Relaxed constraints on neutrino oscillation parameters

    E-Print Network [OSTI]

    Daniela P. Kirilova; Mariana P. Panayotova

    2006-08-04T23:59:59.000Z

    We study the cosmological constraints on active-sterile neutrino oscillations nu_e nu_s for the case when nu_s is partially filled initially, i.e. 0 nu_s oscillations, effective after neutrino decoupling, accounting for all known oscillations effects on cosmological nucleosynthesis. Cosmological constraints on oscillation parameters corresponding to higher than 5% He-4 overproduction and different non-zero initial populations of the sterile state delta N_s 0 are relaxed in comparison with the delta N_s = 0 case and the relaxation is proportional to delta N_s.

  15. Sedimentary parameters of upper Barataria Bay, Louisiana

    E-Print Network [OSTI]

    Siegert, Rudolf B

    1961-01-01T23:59:59.000Z

    SEDIMENTARY PARAMETERS OF UPPER BARATARIA BAY, LOUISIANA A Thesis Rudolf Bernhardt Siegert Submitted to the Graduate School of the Agricultural snd Mechanical College of Texas in partial fulfillment of the reGulremente for the d. agree... of MASTER OF SCIENCE August 1961 Ma)or Sub)ect GeologP SEDYIKNTARY PARAI'ZTEHS OF DT'PBR BARATARIA BAY, LOUISIANA A Thesis By Rudolf Bernhardt Siegert Approved as to style and content by: Chairman of C 'tice Bea of Department or Student Advisor...

  16. The effects of production rates and some reservoir parameters on recovery in a strong water drive gas reservoir

    E-Print Network [OSTI]

    Soemarso, Christophorus

    1978-01-01T23:59:59.000Z

    pressure data. Consequently, reliable imbibition laboratory test data are required. The effects of relative permeability, water and gas, and capillary pressure on the ultimate gas recovery were also in- vestigated. ACKNOWLEDGEMENTS The author' wishes... decrease in initial gas saturation when the desaturation process was used. So, in general, the residual gas saturation is higher when the test is obtained by the resaturation process. His findings supported Osoba s previous work showing that a...

  17. Sensitivity of injection costs to input petrophysical parameters in numerical geologic carbon sequestration models

    SciTech Connect (OSTI)

    Cheng, C. L.; Gragg, M. J.; Perfect, E.; White, Mark D.; Lemiszki, P. J.; McKay, L. D.

    2013-08-24T23:59:59.000Z

    Numerical simulations are widely used in feasibility studies for geologic carbon sequestration. Accurate estimates of petrophysical parameters are needed as inputs for these simulations. However, relatively few experimental values are available for CO2-brine systems. Hence, a sensitivity analysis was performed using the STOMP numerical code for supercritical CO2 injected into a model confined deep saline aquifer. The intrinsic permeability, porosity, pore compressibility, and capillary pressure-saturation/relative permeability parameters (residual liquid saturation, residual gas saturation, and van Genuchten alpha and m values) were varied independently. Their influence on CO2 injection rates and costs were determined and the parameters were ranked based on normalized coefficients of variation. The simulations resulted in differences of up to tens of millions of dollars over the life of the project (i.e., the time taken to inject 10.8 million metric tons of CO2). The two most influential parameters were the intrinsic permeability and the van Genuchten m value. Two other parameters, the residual gas saturation and the residual liquid saturation, ranked above the porosity. These results highlight the need for accurate estimates of capillary pressure-saturation/relative permeability parameters for geologic carbon sequestration simulations in addition to measurements of porosity and intrinsic permeability.

  18. Investigation of Rheological Impacts on Sludge Batch 3 as Insoluble Solids and Wash Endpoints are Adjusted

    SciTech Connect (OSTI)

    Fellinger, T. L.

    2005-07-12T23:59:59.000Z

    The Defense Waste Processing Facility (DWPF) is currently processing and immobilizing radioactive sludge slurry into a durable borosilicate glass. The DWPF has already processed three sludge batches (Sludge Batch 1A, Sludge Batch 1B, and Sludge Batch 2) and is currently processing the fourth sludge batch (Sludge Batch 3). A sludge batch is defined as a single tank of sludge slurry or a combination of sludge slurries from different tanks that has been or will be qualified before being transferred to DWPF. As a part of the Sludge Batch 3 (SB3) qualification task, rheology measurements of the sludge slurry were requested at different insoluble solids loadings. These measurements were requested in order to gain insight into potential processing problems that may occur as the insoluble solids are adjusted up or down (by concentration or dilution) during the process. As a part of this study, a portion of the ''as received'' SB3 sample was washed with inhibited water (0.015 M NaOH and 0.015 M NaNO2) to target 0.5M Na versus a measured 1M Na in the supernate. The purpose of the ''washing'' step was to allow a comparison of the SB3 rheological data to the rheological data collected for Sludge Batch 2 (SB2) and to determine if there was a dependence of the yield stress and consistency as a function of washing. The ''as received'' SB3 rheology data was also compared to SB3 simulants prepared by the Simulant Development Program in order to provide guidance for selecting a simulant that is more representative of the rheological properties of the radioactive sludge slurry. A summary of the observations, conclusions are: (1) The yield stress and plastic viscosity increased as the weight percent insoluble solids were increased for the ''as received'' and ''washed'' SB3 samples, at a fixed pH. (2) For the same insoluble solids loading, the yield stress for the SB2 sample is approximately a factor of three higher than the ''as received'' SB3 sample. There also appears to be small difference in the plastic viscosity. This difference is probably due to the different Na concentrations of the slurries. (3) The yield stress for the SB2 sample at 17.5 wt. % insoluble solids loading is four times higher than the ''washed'' SB3 sample at 16.5 wt. % insoluble solids. There also appears to be small difference in the plastic viscosity. The differences for the yield stress and consistency can be explained by the differences in the Fe and Na concentrations of the sludge slurry and the anion concentrations of the resulting supernates. (4) The rheological properties (i.e. yield stress and plastic viscosity), as the insoluble solids are adjusted, for the ''as received'' and ''washed'' SB3 samples are different. The plastic viscosity curve for the ''as received'' SB3 sample was higher than the plastic viscosity curve for SB3 ''washed'' sample. The yield stress curve for the ''washed'' SB3 sample is slightly lower than the ''as received'' SB3 sample up until {approx}19 wt. % insoluble solids. The ''washed'' SB3 sample then exceeds the yield stress curve for the ''as received'' SB3 sample. This rheological behavior is probably due to the difference in the Na concentration of the supernate for the samples. (5) No unusual behavior, such as air entrainment, was noted for the ''as received'' SB3 sample. (6) The observed physical properties of the SB3 sample changed after washing. The ''washed'' SB3 sample entrained air readily at higher insoluble solids loadings (i.e. 14.1, 16.5, 19.5 wt. %) as it did for SB2. The air entrainment appeared to dissipate for the SB3 sample at the lower insoluble solids loadings (i.e. 9.7 and 11.7 wt. %). (7) The physical behavior of SB3 can be influenced by controlling the Na concentration in the supernate and the wt. % insoluble solids. The cause for the air entrainment in the ''washed'' SB3 sample could be due to a change in the particle size during the washing step. (8) The SB3 simulants prepared for the Simulant Development Program were approximately a factor of 1.6 to 4 times higher for yield stress and 2.6 to 4 times higher

  19. Monitoring MWD torque improved pdc bit penetration rates

    SciTech Connect (OSTI)

    Koskie, E.T. Jr. (Diamant Boart, Stratabit, Houston, TX (US)); Slagel, P. (Anadrill Schlumberger, New Orleans, LA (US)); Lesso, W. Jr. (Anadrill Schlumberger, Sugar Land, TX (US))

    1988-10-01T23:59:59.000Z

    Measurement while drilling tools were used to monitor and adjust downhole torque, which resulted in faster drilling and longer bit life. Polycrystalline diamond compact (PDC) bits have changed drilling strategies in the sand shale sequences of the Gulf of Mexico, increasing both rate of penetration and bit run lengths, and decreasing drilling costs, particularly in directional wells. While these important results have been achieved using the best drilling information available, little attention has been paid to downhole operating conditions since this information was unavailable during realtime drilling operations. In an effort to learn what benefits could be realized through applying MWD drilling technology to directional drilling with PDC bits, Tenneco teamed up with Anadrill Schlumberger for MWD downhole drilling measurements, and Diamant Boart Stratabit with their PD-11 series bits, to see what could be gained by the close cooperation of these three parties in drilling a typical offshore well. The result was a well drilled on target and under budget, and a new record bit run.

  20. Gauging risks: Rising interest rates and industry restructuring

    SciTech Connect (OSTI)

    Cross, P.S.

    1995-03-01T23:59:59.000Z

    With major utility industry restructuring looming, risk issues have become proportionally more important and complex. California regulators, for example, have increased the return for the state`s electric utilities to account for the pace of restructuring in the `Blue Book` proceedings. Performance-based regulatory reform efforts, new environmental regulations, and swings in interest rate trends have already been cited to support utility risk bonuses. Yet, in many cases, regulators have refused to award bonus adjustments, finding such changes to well known and reflected in the standard financial models used in setting return on equity. Nevertheless, regulators have acknowledged that restructuring might increase utilities` cost of capital. While finding that consumers might benefit from restructuring and competition at the retail level, the Connecticut Department of Public Utility Control advised careful consideration of downside risks. The possibility that shareholders might be left to cover high-cost investment stranded as a result of increased competition in the electric market has also figured in the return-on-equity debate. At the same time, the question of whether investors assume the risk of paying for uneconomic utility investments has become a focal point in the policy debate over stranded costs.

  1. A rate equation approach to cavity mediated laser cooling

    E-Print Network [OSTI]

    Tony Blake; Andreas Kurcz; Almut Beige

    2012-07-09T23:59:59.000Z

    The cooling rate for cavity mediated laser cooling scales as the Lamb-Dicke parameter eta squared. A proper analysis of the cooling process hence needs to take terms up to eta^2 in the system dynamics into account. In this paper, we present such an analysis for a standard scenario of cavity mediated laser cooling with eta cooling. However, for a weakly confined particle inside a strongly coupled cavity, which is the most interesting case for the cooling of molecules, numerical results indicate that even more detailed calculations are needed to model the cooling process accurately.

  2. Parameter exploration of optically trapped liquid aerosols

    E-Print Network [OSTI]

    D. R. Burnham; P. J. Reece; D. McGloin

    2010-06-24T23:59:59.000Z

    When studying the motion of optically trapped particles on the $\\mu s$ time scale, in low viscous media such as air, inertia cannot be neglected. Resolution of unusual and interesting behaviour not seen in colloidal trapping experiments is possible. In attempt to explain the phenomena we use power spectral methods to perform a parameter study of the Brownian motion of optically trapped liquid aerosol droplets concentrated around the critically damped regime. We present evidence that the system is suitably described by a simple harmonic oscillator model which must include a description of Fax\\'{e}n's correction, but not necessarily frequency dependent hydrodynamic corrections to Stokes' law. We also provide results describing how the system behaves under several variables and discuss the difficulty in decoupling the parameters responsible for the observed behaviour. We show that due to the relatively low dynamic viscosity and high trap stiffness it is easy to transfer between over- and under-damped motion by experimentally altering either trap stiffness or damping. Our results suggest stable aerosol trapping may be achieved in under-damped conditions, but the onset of deleterious optical forces at high trapping powers prevents the probing of the upper stability limits due to Brownian motion.

  3. CONSTRAINING THE SYMMETRY PARAMETERS OF THE NUCLEAR INTERACTION

    SciTech Connect (OSTI)

    Lattimer, James M. [Department of Physics and Astronomy, Stony Brook University, Stony Brook, NY 11794-3800 (United States); Lim, Yeunhwan, E-mail: james.lattimer@stonybrook.edu, E-mail: yeunhwan.lim@gmail.com [Department of Physics Education, Daegu University, Gyeongsan 712-714 (Korea, Republic of)

    2013-07-01T23:59:59.000Z

    One of the major uncertainties in the dense matter equation of state has been the nuclear symmetry energy. The density dependence of the symmetry energy is important in nuclear astrophysics, as it controls the neutronization of matter in core-collapse supernovae, the radii of neutron stars and the thicknesses of their crusts, the rate of cooling of neutron stars, and the properties of nuclei involved in r-process nucleosynthesis. We show that fits of nuclear masses to experimental masses, combined with other experimental information from neutron skins, heavy ion collisions, giant dipole resonances, and dipole polarizabilities, lead to stringent constraints on parameters that describe the symmetry energy near the nuclear saturation density. These constraints are remarkably consistent with inferences from theoretical calculations of pure neutron matter, and, furthermore, with astrophysical observations of neutron stars. The concordance of experimental, theoretical, and observational analyses suggests that the symmetry parameters S{sub v} and L are in the range 29.0-32.7 MeV and 40.5-61.9 MeV, respectively, and that the neutron star radius, for a 1.4 M{sub Sun} star, is in the narrow window 10.7 km

  4. Influence of Multiplicative Stochastic Variation on Translational Elongation Rates

    E-Print Network [OSTI]

    Sandip Datta; Brian Seed

    2014-09-15T23:59:59.000Z

    Recent experiments have shown that stochastic effects exerted at the level of translation contribute a substantial portion of the variation in abundance of proteins expressed at moderate to high levels. This study analyzes translational noise arising from fluctuations in residue-specific elongation rates. The resulting variation has multiplicative components that lead individual protein abundances in a population to exhibit approximately log-normal behavior. The high variability inherent in the process leads to parameter variation that has the features of a type of noise in biological systems that has been characterized as extrinsic. Elongation rate variation offers an accounting for a major component of extrinsic noise, and the analysis provided here highlights a probability distribution that is a natural extension of the Poisson and has broad applicability to many types of multiplicative noise processes.

  5. Hazard rate estimation for location-scale distributions under complete and censored data

    E-Print Network [OSTI]

    Surucu, Baris

    2012-01-01T23:59:59.000Z

    In reliability and life testing studies, the topic of estimating hazard rate has received great attention in recent years since an estimate of hazard rate is a quite useful tool for making decisions. Some works have included nonparametric approaches while some have considered parametric structural models for complete as well as censored data sets; see Meeker et al. (1992), Antoniadis and Gr\\'egoire (1999), Rai and Singh (2003), Bezandry et al. (2005), Brunel and Comte (2008), and Mahapatra et al. (2012). Depending on the shapes of the hazard rate, efficiencies differ markedly across proposed estimators. This situation is remarkable especially when different estimation techniques are utilized for unknown parameters of underlying distributions in parametric approaches. That is, estimated hazard rate (and also reliability) at a specific time point t as functions of these estimators leads to inconsistent coverage probabilities as distributional convergence of hazard rate estimator may not be at the desired rate f...

  6. Total ionizing dose effects of domestic SiGe HBTs under different dose rate

    E-Print Network [OSTI]

    Mo-Han, Liu; Wu-Ying, Ma; Xin, Wang; Qi, Guo; Cheng-Fa, He; Ke, Jiang; Xiao-Long, Li; Ming-Zhu, Xiong

    2015-01-01T23:59:59.000Z

    The total ionizing radiation (TID) response of commercial NPN silicon germanium hetero-junction bipolar transistors (SiGe HBTs) produced domestic were investigated under the dose rate of 800mGy(Si)/s and 1.3mGy(Si)/s with Co-60 gamma irradiation source, respectively. The changes of the transistor parameter such as Gummel characteristics, excess base current before and after irradiation are investigated. The results of the experiments shows that for the KT1151, the radiation damage have slightly difference under the different dose rate after the prolonged annealing, shows an time dependent effect(TDE). But for the KT9041, the degradations of low dose rate irradiation are more higher than the high dose rate, demonstrate that there have potential enhanced low dose rate sensitive(ELDRS) effect exist on KT9041. The underlying physical mechanisms of the different dose rates response induced by the gamma ray are detailed discussed.

  7. 1996 Wholesale Power and Transmission Rate Schedules.

    SciTech Connect (OSTI)

    United States. Bonneville Power Administration.

    1996-10-01T23:59:59.000Z

    Bonneville Power Administration`s (BPA) 1996 Wholesale Power Rate Schedules, 1996 Ancillary Products and Services Rate Schedule, 1996 Transmission Rate Schedules, and General Rate Schedule Provisions, contained herein, were approved on an interim basis effective October 1, 1996. These rate schedules and provisions were approved by the Federal Energy Regulatory Commission (FERC), United States Department of Energy, in September 1996 (Docket Nos EF96-2011-000 and EF96f-2021-000). These rate schedules and General Rate Schedule Provisions were approved on a final basis by the FERC July 30, 1997, in Dept. of Energy--Bonneville Power Administration, Docket Nos. EF96-2011-000 and EF96-2021-000. Except as noted elsewhere, these 1996 rate schedules and provisions supersede BPA`s Wholesale Power Rate Schedules and General Rate Schedule Provisions, and Transmission Rate Schedules and General Transmission Rate Schedule Provisions, effective October 1, 1995. These rate schedules and general rate schedule provisions include all errata.

  8. Effects of engine speed, fueling rate, and combustion phasing on the thermal stratification required to limit HCCI knocking intensity.

    SciTech Connect (OSTI)

    SjÞoberg, Magnus; Dec, John E.

    2004-12-01T23:59:59.000Z

    Thermal stratification has the potential to reduce pressure-rise rates and allow increased power output for HCCI engines. This paper systematically examines how the amount of thermal stratification of the core of the charge has to be adjusted to avoid excessive knock as the engine speed and fueling rate are increased. This is accomplished by a combination of multi-zone chemical-kinetics modeling and engine experiments, using iso-octane as the fuel. The experiments show that, for a low-residual engine configuration, the pressure traces are self-similar during changes to the engine speed when CA50 is maintained by adjusting the intake temperature. Consequently, the absolute pressure-rise rate measured as bar/ms increases proportionally with the engine speed. As a result, the knocking (ringing) intensity increases drastically with engine speed, unless counteracted by some means. This paper describes how adjustments of the thermal width of the in-cylinder charge can be used to limit the ringing intensity to 5 MW/m2 as both engine speed and fueling are increased. If the thermal width can be tailored without constraints, this enables smooth operation even for combinations of high speed, high load, and combustion phasing close to TDC. Since large alterations of the thermal width of the charge are not always possible, combustion retard is considered to reduce the requirement on the thermal stratification. The results show that combustion retard carries significant potential since it amplifies the benefit of a fixed thermal width. Therefore, the thermal stratification required for operation with an acceptable knocking intensity can be decreased substantially by the use of combustion retard. This enables combinations of high engine speed and high fueling rate even for operation with the naturally occurring thermal stratification. However, very precise control of the combustion phasing will likely be required for such operation.

  9. Pulse electrodeposition of gold-nickel alloys from a citrate bath. 1. Deposition rate and coating appearance

    SciTech Connect (OSTI)

    Kostin, N.A.; Kaptanovskii, V.I. [State Technical Univ. of Railway Transport, Dnepropetrovsk (Ukraine)

    1994-11-01T23:59:59.000Z

    The effect of various parameters of pulse polarizing current on the deposition rate and appearance of gold-nickel coatings used in the watch industry was studied. It was shown that the pulse conditions allow deposition-rate enhancement and production of variously colored coatings.

  10. Characterization of multiport solid state imagers at megahertz data rates

    SciTech Connect (OSTI)

    Yates, G.J.; Pena, C.R.; Turko, B.T.

    1994-08-01T23:59:59.000Z

    Test results obtained from two recently developed multiport Charge-Coupled Devices (CCDs) operated at pixel rates in the 10-to-100 MHz range will be presented . The CCDs were evaluated in Los Alamos National Laboratory`s High Speed Solid State Imager Test Station (HSTS) which features PC-based programmable clock waveform generation (Tektronix DAS 9200) and synchronously clocked Digital Sampling Oscilloscopes (DSOs) (LeCroy 9424/9314 series) for CCD pixel data acquisition, analysis and storage. The HSTS also provided special designed optical pinhole array test patterns in the 5-to-50 micron diameter range for use with Xenon Strobe and pulsed laser light sources to simultaneously provide multiple single-pixel illumination patterns to study CCD point-spread-function (PSF) and pixel smear characteristics. The two CCDs tested, EEV model CCD-13 and EG&G Reticon model HSO512J, are both 512 {times} 512 pixel arrays with eight (8) and sixteen (16) video output ports respectively. Both devices are generically Frame Transfer CCDs (FT CCDs) designed for parallel bi-directional vertical readout to augment their multiport design for increased pixel rates over common single port serial readout architecture. Although both CCDs were tested similarly, differences in their designs precluded normalization or any direct comparisons of test results. Rate dependent parameters investigated include S/N, PSF, and MTF. The performance observed for the two imagers at various pixel rates from selected typical output ports is discussed.

  11. Parameter monitoring compensation system and method

    DOE Patents [OSTI]

    Barkman, W.E.; Babelay, E.F.; DeMint, P.D.; Hebble, T.L.; Igou, R.E.; Williams, R.R.; Klages, E.J.; Rasnick, W.H.

    1995-02-07T23:59:59.000Z

    A compensation system is described for a computer-controlled machining apparatus having a controller and including a cutting tool and a workpiece holder which are movable relative to one another along a preprogrammed path during a machining operation. It utilizes sensors for gathering information at a preselected stage of a machining operation relating to an actual condition. The controller compares the actual condition to a condition which the program presumes to exist at the preselected stage and alters the program in accordance with detected variations between the actual condition and the assumed condition. Such conditions may be related to process parameters, such as a position, dimension or shape of the cutting tool or workpiece or an environmental temperature associated with the machining operation, and such sensors may be a contact or a non-contact type of sensor or a temperature transducer. 7 figs.

  12. Scanning the Parameter Space of Holographic Superconductors

    E-Print Network [OSTI]

    Obinna C. Umeh

    2009-07-17T23:59:59.000Z

    We study various physical quantities associated with holographic s-wave superconductors as functions of the scaling dimensions of the dual condensates. A bulk scalar field with negative mass squared $m^2$, satisfying the Breitenlohner-Freedman stability bound and the unitarity bound, and allowed to vary in $0.5$ unit intervals, were considered. We observe that all the physical quantities investigated are sensitive to the scaling dimensions of the dual condensates. For all the $m^2$, the characteristic lengths diverge at the critical temperature in agreement with the Ginzburg-Landau theory. The Ginzburg-Landau parameter, obtained from these length scales indicates that the holographic superconductors can be type I or type II depending on the charge and the scaling dimensions of the dual condensates. For a fixed charge, there exists a critical scaling dimension, above which a holographic superconductor is type I, below which it becomes a type II.

  13. 2012 Wholesale Power and Transmission Rate

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the meaning given such term in section 3.3.5. "COU Parties' PF Rate" means any BPA wholesale power rate for service to COUs' "general requirements" (as defined in section...

  14. ON THE RELATIONSHIP BETWEEN CONVERGENCE RATES OF ...

    E-Print Network [OSTI]

    Q-rates in terms of the di erential properties of v and in terms of the ... schemes of this kind is to assure that they converge at a provably fast rate to a point.

  15. Energy Efficiency Interest Rate Reduction Program

    Broader source: Energy.gov [DOE]

    The Alaska Housing Finance Corporation (AHFC) offers interest rate reductions to home buyers purchasing new and existing homes with 5 Star and 5 Star Plus energy ratings. All homes constructed on...

  16. Fluorescence Assay for Polymerase Arrival Rates

    E-Print Network [OSTI]

    Che, Austin

    2003-08-31T23:59:59.000Z

    To engineer complex synthetic biological systems will require modular design, assembly, and characterization strategies. The RNA polymerase arrival rate (PAR) is defined to be the rate that RNA polymerases arrive at a ...

  17. Fluorescence assay for polymerase arrival rates

    E-Print Network [OSTI]

    Che, Austin, 1979-

    2004-01-01T23:59:59.000Z

    To engineer complex synthetic biological systems will require modular design, assembly, and characterization strategies. The RNA polymerase arrival rate (PAR) is defined to be the rate that RNA polymerases arrive at a ...

  18. Home Energy Ratings and Building Performance

    E-Print Network [OSTI]

    Gardner, J.C.

    climate as they affect the rating score of a proposed or completed structure. The rating is used to determine the most cost effective mechanical systems, building envelope design including window and door types, effect of various roofing materials...

  19. Private Sector Rates (FY 2015) Instrument Technique

    E-Print Network [OSTI]

    Bashir, Rashid

    Source Laser $150 $175 Nanophoton Raman 11 Raman Spectroscopy $150 $175 Newport Solar Simulator Solar Rates for the Material Research Laboratory Facilities Rates for Private Sector companies and researchers

  20. Rate Setting for Small Water Systems

    E-Print Network [OSTI]

    Dozier, Monty; Theodori, Gene L.; Jensen, Ricard

    2007-03-28T23:59:59.000Z

    Knowing how to set the proper rate for water service is a challenge for small water systems. They must generate enough revenue to remain solvent, but offer affordable service. This publication describes the various types of rates and explains...

  1. Development of the Fast Scintillation Detector with Programmable High Voltage Adjustment Suitable for Moessbauer Spectroscopy

    SciTech Connect (OSTI)

    Prochazka, R.; Frydrych, J. [Center for Nanomaterial Research, Faculty of Science Palacky University, Slechtitelu 11, 783 71 Olomouc (Czech Republic); Pechousek, J. [Center for Nanomaterial Research, Faculty of Science Palacky University, Slechtitelu 11, 783 71 Olomouc (Czech Republic); Department of Experimental Physics, Faculty of Science, 17. listopadu 1192/12, 771 46 Olomouc (Czech Republic)

    2010-07-13T23:59:59.000Z

    This work is focused on a development of a compact fast scintillation detector suitable for Moessbauer spectroscopy (low energy X-ray/{gamma}-ray detection) where high counting rates are inevitable. Optimization of this part was necessary for a reliable function, better time resolution and to avoid a detector pulses pile-up effect. The pile-up effect decreases the measurement performance, significantly depends on the source activity and also on the pulse duration. Our new detection unit includes a fast scintillation crystal YAP:Ce, an R6095 photomultiplier tube, a high voltage power supply socket C9028-01 assembly, an AD5252 digital potentiometer with an I2C interface and an AD8000 ultra fast operation preamplifier. The main advantages of this solution lie in a short pulse duration (less than 200 ns), stable operation for high activities, programmable gain of the high voltage supply and compact design in the aluminum housing.

  2. Irradiation Experiment Conceptual Design Parameters for NBSR Fuel Conversion

    SciTech Connect (OSTI)

    Brown, N. R.; Brown, N. R.; Baek, J. S; Hanson, A. L.; Cuadra, A.; Cheng, L. Y.; Diamond, D. J.

    2014-04-30T23:59:59.000Z

    It has been proposed to convert the National Institute of Standards and Technology (NIST) research reactor, known as the NBSR, from high-enriched uranium (HEU) fuel to low-Enriched uranium (LEU) fuel. The motivation to convert the NBSR to LEU fuel is to reduce the risk of proliferation of special nuclear material. This report is a compilation of relevant information from recent studies related to the proposed conversion using a metal alloy of LEU with 10 w/o molybdenum. The objective is to inform the design of the mini-plate and full-size-Plate irradiation experiments that are being planned. This report provides relevant dimensions of the fuel elements, and the following parameters at steady state: average and maximum fission rate density and fission density, fuel temperature distribution for the plate with maximum local temperature, and two-dimensional heat flux profiles of fuel plates with high power densities. The latter profiles are given for plates in both the inner and outer core zones and for cores with both fresh and depleted shim arms (reactivity control devices). A summary of the methodology to obtain these results is presented. Fuel element tolerance assumptions and hot channel factors used in the safety analysis are also given.

  3. Irradiation Experiment Conceptual Design Parameters for NBSR Fuel Conversion

    SciTech Connect (OSTI)

    Brown N. R.; Brown,N.R.; Baek,J.S; Hanson, A.L.; Cuadra,A.; Cheng,L.Y.; Diamond, D.J.

    2013-03-31T23:59:59.000Z

    It has been proposed to convert the National Institute of Standards and Technology (NIST) research reactor, known as the NBSR, from high-enriched uranium (HEU) fuel to low-enriched uranium (LEU) fuel. The motivation to convert the NBSR to LEU fuel is to reduce the risk of proliferation of special nuclear material. This report is a compilation of relevant information from recent studies related to the proposed conversion using a metal alloy of LEU with 10 w/o molybdenum. The objective is to inform the design of the mini-plate and full-size plate irradiation experiments that are being planned. This report provides relevant dimensions of the fuel elements, and the following parameters at steady state: average and maximum fission rate density and fission density, fuel temperature distribution for the plate with maximum local temperature, and two-dimensional heat flux profiles of fuel plates with high power densities. . The latter profiles are given for plates in both the inner and outer core zones and for cores with both fresh and depleted shim arms (reactivity control devices). In addition, a summary of the methodology to obtain these results is presented.

  4. Optimization Online - Faster convergence rates of relaxed ...

    E-Print Network [OSTI]

    Damek Davis

    2014-07-19T23:59:59.000Z

    Jul 19, 2014 ... Faster convergence rates of relaxed Peaceman-Rachford and ADMM under regularity assumptions. Damek Davis (damek ***at*** ...

  5. Spontaneous Emission Rate Enhancement Using Optical Antennas

    E-Print Network [OSTI]

    Kumar, Nikhil

    2013-01-01T23:59:59.000Z

    of  Spontaneous  Emission  in  a  Semiconductor  nanoLED,”  emission  rate  enhancement  using  the  Fluorescent  Emission  by  Lattice   Resonances  in  

  6. N. Frage, M.P. Dariel Effect of spark plasma sintering (SPS) parameters and LiF doping on the functional

    E-Print Network [OSTI]

    Vardi, Amichay

    1 N. Frage, M.P. Dariel Effect of spark plasma sintering (SPS) parameters and LiF doping Nd:YAG specimens sintered at various temperatures (a) and with different heating rate (b). Fig. 5. Optical transmittance of the LiF-doped specimen sintered at 1400o C for 20 min with heating rate

  7. 2007 Wholesale Power Rate Case Initial Proposal : 2007 Wholesale Power Rate Schedule and General Rate Schedule Provisions.

    SciTech Connect (OSTI)

    United States. Bonneville Power Administration.

    2005-11-01T23:59:59.000Z

    This schedule is available for the contract purchase of Firm Power to be used within the Pacific Northwest (PNW). Priority Firm (PF) Power may be purchased by public bodies, cooperatives, and Federal agencies for resale to ultimate consumers, for direct consumption, and for Construction, Test and Start-Up, and Station Service. Rates in this schedule are in effect beginning October 1, 2006, and apply to purchases under requirements Firm Power sales contracts for a three-year period. The Slice Product is only available for public bodies and cooperatives who have signed Slice contracts for the FY 2002-2011 period. Utilities participating in the Residential Exchange Program (REP) under Section 5(c) of the Northwest Power Act may purchase Priority Firm Power pursuant to the Residential Exchange Program. Rates under contracts that contain charges that escalate based on BPA's Priority Firm Power rates shall be based on the three-year rates listed in this rate schedule in addition to applicable transmission charges. This rate schedule supersedes the PF-02 rate schedule, which went into effect October 1, 2001. Sales under the PF-07 rate schedule are subject to BPA's 2007 General Rate Schedule Provisions (2007 GRSPs). Products available under this rate schedule are defined in the 2007 GRSPs. For sales under this rate schedule, bills shall be rendered and payments due pursuant to BPA's 2007 GRSPs and billing process.

  8. WAGES, FLEXIBLE EXCHANGE RATES, AND MACROECONOMIC POLICY*

    E-Print Network [OSTI]

    WAGES, FLEXIBLE EXCHANGE RATES, AND MACROECONOMIC POLICY* JEFFREY SACHS In an open economy with a floaLing exchange rate, the efficacy of fiscal and monetary policy depends fundamentally on the wage rate depreciation, while fiscal expansion has no output effect. These results hold only when real wages

  9. Kiwifruitsize influences softening rate during storage

    E-Print Network [OSTI]

    Crisosto, Carlos H.

    Kiwifruitsize influences softening rate during storage Carlos H. Crisosto o David Garner D Katia)at 32*F for 16 weeks. Un- der both storage conditions,large fruit had a slower rate of softening than fruit size and the rate of softening under air and CA conditions will help cold storage managerssafely

  10. AUXILIARY RATE CALCULATION The Budget Office

    E-Print Network [OSTI]

    Weston, Ken

    AUXILIARY RATE CALCULATION The Budget Office #12;AGENDA Guiding Principles Rate Proposal Building Office supplies for budget manager reconciliationOffice supplies for budget manager reconciliation: Equipment Compensated Leave #12;CALCULATING A RATE Budgeted Expenses Budgeted Usage BaseBudgeted Usage Base

  11. West Virginia University -Main Campus Student Retention and Graduation Rates

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    West Virginia University - Main Campus Student Retention and Graduation Rates First-Time, Full ---------------------------------------------------------------------Continuation Rates and Cumulative Graduation Rates

  12. Impact of Independently Controlling Ventilation Rate per Person and Ventilation

    E-Print Network [OSTI]

    1 Impact of Independently Controlling Ventilation Rate per Person and Ventilation Rate per Floor Impact of Independently Controlling Ventilation Rate per Person and Ventilation Rate per Floor Area

  13. FY2015 Standard Recharge Rates 12-30-2014.xls

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    "***" indicates that these rates have not yet been received and approved. Organizational Unit Direct Portion of Rate Machine Power Rate Total Rate Total BNL Users...

  14. A new formula for the total longshore sediment transport rate Atilla Bayram a,, Magnus Larson b

    E-Print Network [OSTI]

    US Army Corps of Engineers

    A new formula for the total longshore sediment transport rate Atilla Bayram a,, Magnus Larson b April 2007 Available online 7 June 2007 Abstract A new predictive formula for the total longshore employed to evaluate the predictive capability of the new formula. The main parameter of the formula (a

  15. Structural Change, the Real Exchange Rate, and the Balance of Payments in Mexico, 1960-2012

    E-Print Network [OSTI]

    Lansky, Joshua

    Structural Change, the Real Exchange Rate, and the Balance of Payments in Mexico, 1960-2012 Carlos structural changes in the composition of Mexico's trade and the parameters that affect it across five-of-payments constraint may account for the post-liberalization slowdown in Mexico's growth only during certain subperiods

  16. Power-system dynamic equivalents:coherency recognition via the rate of change of

    E-Print Network [OSTI]

    Catholic University of Chile (Universidad Católica de Chile)

    .F.I.M.A. Indexing terms: Power systems and plant, Simulation, Time-varying parameters, Dynamic equivalents AbstractPower-system dynamic equivalents:coherency recognition via the rate of change of kinetic energy H of sections of a power system, its main drawback being the extensive computation times required to recognise

  17. 1 Long-term volumetric eruption rates and magma budgets 2 Scott M. White

    E-Print Network [OSTI]

    Bigelow, Stephen

    were compiled for selected volcanic centers where long-term (>104 years) data 15 were available. More be a consequence of the fundamental 30 parameters governing rates of melt generation (e.g., subsolidus isentropic, geothermal 43 resources and the evolution and heat budget of the 44 crust, surprisingly little is known

  18. FUNDAMENTAL PARAMETERS AND CHEMICAL COMPOSITION OF ARCTURUS

    SciTech Connect (OSTI)

    Ramirez, I. [Observatories of the Carnegie Institution for Science, 813 Santa Barbara Street, Pasadena, CA 91101 (United States); Allende Prieto, C., E-mail: ivan@obs.carnegiescience.edu, E-mail: callende@iac.es [Instituto de Astrofisica de Canarias, 38205 La Laguna, Tenerife (Spain)

    2011-12-20T23:59:59.000Z

    We derive a self-consistent set of atmospheric parameters and abundances of 17 elements for the red giant star Arcturus: T{sub eff} = 4286 {+-} 30 K, log g = 1.66 {+-} 0.05, and [Fe/H] = -0.52 {+-} 0.04. The effective temperature was determined using model atmosphere fits to the observed spectral energy distribution from the blue to the mid-infrared (0.44 to 10 {mu}m). The surface gravity was calculated using the trigonometric parallax of the star and stellar evolution models. A differential abundance analysis relative to the solar spectrum allowed us to derive iron abundances from equivalent width measurements of 37 Fe I and 9 Fe II lines, unblended in the spectra of both Arcturus and the Sun; the [Fe/H] value adopted is derived from Fe I lines. We also determine the mass, radius, and age of Arcturus: M = 1.08 {+-} 0.06 M{sub Sun }, R = 25.4 {+-} 0.2 R{sub Sun }, and {tau} = 7.1{sup +1.5}{sub -1.2} Gyr. Finally, abundances of the following elements are measured from an equivalent width analysis of atomic features: C, O, Na, Mg, Al, Si, K, Ca, Sc, Ti, V, Cr, Mn, Co, Ni, and Zn. We find the chemical composition of Arcturus typical of that of a local thick-disk star, consistent with its kinematics.

  19. PHYSICAL PARAMETERS OF STANDARD AND BLOWOUT JETS

    SciTech Connect (OSTI)

    Pucci, Stefano; Romoli, Marco [Department of Physics and Astronomy, University of Firenze, I-50121 Firenze (Italy); Poletto, Giannina [INAF-Arcetri Astrophysical Observatory, I-50125 Firenze (Italy); Sterling, Alphonse C., E-mail: stpucci@arcetri.astro.it [Space Science Office, NASA/MSFC, Huntsville, Al 35812 (United States)

    2013-10-10T23:59:59.000Z

    The X-ray Telescope on board the Hinode mission revealed the occurrence, in polar coronal holes, of much more numerous jets than previously indicated by the Yohkoh/Soft X-ray Telescope. These plasma ejections can be of two types, depending on whether they fit the standard reconnection scenario for coronal jets or if they include a blowout-like eruption. In this work, we analyze two jets, one standard and one blowout, that have been observed by the Hinode and STEREO experiments. We aim to infer differences in the physical parameters that correspond to the different morphologies of the events. To this end, we adopt spectroscopic techniques and determine the profiles of the plasma temperature, density, and outflow speed versus time and position along the jets. The blowout jet has a higher outflow speed, a marginally higher temperature, and is rooted in a stronger magnetic field region than the standard event. Our data provide evidence for recursively occurring reconnection episodes within both the standard and the blowout jet, pointing either to bursty reconnection or to reconnection occurring at different locations over the jet lifetimes. We make a crude estimate of the energy budget of the two jets and show how energy is partitioned among different forms. Also, we show that the magnetic energy that feeds the blowout jet is a factor of 10 higher than the magnetic energy that fuels the standard event.

  20. Charged-Particle Thermonuclear Reaction Rates: I. Monte Carlo Method and Statistical Distributions

    E-Print Network [OSTI]

    Richard Longland; Christian Iliadis; Art Champagne; Joe Newton; Claudio Ugalde; Alain Coc; Ryan Fitzgerald

    2010-04-23T23:59:59.000Z

    A method based on Monte Carlo techniques is presented for evaluating thermonuclear reaction rates. We begin by reviewing commonly applied procedures and point out that reaction rates that have been reported up to now in the literature have no rigorous statistical meaning. Subsequently, we associate each nuclear physics quantity entering in the calculation of reaction rates with a specific probability density function, including Gaussian, lognormal and chi-squared distributions. Based on these probability density functions the total reaction rate is randomly sampled many times until the required statistical precision is achieved. This procedure results in a median (Monte Carlo) rate which agrees under certain conditions with the commonly reported recommended "classical" rate. In addition, we present at each temperature a low rate and a high rate, corresponding to the 0.16 and 0.84 quantiles of the cumulative reaction rate distribution. These quantities are in general different from the statistically meaningless "minimum" (or "lower limit") and "maximum" (or "upper limit") reaction rates which are commonly reported. Furthermore, we approximate the output reaction rate probability density function by a lognormal distribution and present, at each temperature, the lognormal parameters miu and sigma. The values of these quantities will be crucial for future Monte Carlo nucleosynthesis studies. Our new reaction rates, appropriate for bare nuclei in the laboratory, are tabulated in the second paper of this series (Paper II). The nuclear physics input used to derive our reaction rates is presented in the third paper of this series (Paper III). In the fourth paper of this series (Paper IV) we compare our new reaction rates to previous results.

  1. High-Dose-Rate Brachytherapy Boost for Prostate Cancer: Comparison of Two Different Fractionation Schemes

    SciTech Connect (OSTI)

    Kaprealian, Tania [Department of Radiation Oncology, University of California, San Francisco Helen Diller Family Comprehensive Cancer Center, San Francisco, California (United States); Weinberg, Vivian [Biostatistics and Computational Biology Core, University of California, San Francisco Helen Diller Family Comprehensive Cancer Center, San Francisco, California (United States); Speight, Joycelyn L. [Department of Radiation Oncology, University of California, San Francisco Helen Diller Family Comprehensive Cancer Center, San Francisco, California (United States); Department of Urology, University of California, San Francisco Helen Diller Family Comprehensive Cancer Center, San Francisco, California (United States); Gottschalk, Alexander R. [Department of Radiation Oncology, University of California, San Francisco Helen Diller Family Comprehensive Cancer Center, San Francisco, California (United States); Roach, Mack [Department of Radiation Oncology, University of California, San Francisco Helen Diller Family Comprehensive Cancer Center, San Francisco, California (United States); Department of Urology, University of California, San Francisco Helen Diller Family Comprehensive Cancer Center, San Francisco, California (United States); Shinohara, Katsuto [Department of Urology, University of California, San Francisco Helen Diller Family Comprehensive Cancer Center, San Francisco, California (United States); Hsu, I.-Chow, E-mail: IHsu@radonc.ucsf.edu [Department of Radiation Oncology, University of California, San Francisco Helen Diller Family Comprehensive Cancer Center, San Francisco, California (United States)

    2012-01-01T23:59:59.000Z

    Purpose: This is a retrospective study comparing our experience with high-dose-rate (HDR) brachytherapy boost for prostate cancer, using two different fractionation schemes, 600 cGy Multiplication-Sign 3 fractions (patient group 1) and 950 cGy Multiplication-Sign 2 fractions (patient group 2). Methods and Materials: A total of 165 patients were treated for prostate cancer using external beam radiation therapy up to a dose of 45 Gy, followed by an HDR brachytherapy prostate radiation boost. Between July 1997 and Nov 1999, 64 patients were treated with an HDR boost of 600 cGy Multiplication-Sign 3 fractions; and between June 2000 and Nov 2005, 101 patients were treated with an HDR boost of 950 cGy Multiplication-Sign 2 fractions. All but 9 patients had at least one of the following risk features: pretreatment prostate-specific antigen (PSA) level >10, a Gleason score {>=}7, and/or clinical stage T3 disease. Results: Median follow-up was 105 months for group 1 and 43 months for group 2. Patients in group 2 had a greater number of high-risk features than group 1 (p = 0.02). Adjusted for comparable follow-up, there was no difference in biochemical no-evidence-of-disease (bNED) rate between the two fractionation scheme approaches, with 5-year Kaplan-Meier estimates of 93.5% in group 1 and 87.3% in group 2 (p = 0.19). The 5-year estimates of progression-free survival were 86% for group 1 and 83% for group 2 (p = 0.53). Among high-risk patients, there were no differences in bNED or PFS rate due to fractionation. Conclusions: Results were excellent for both groups. Adjusted for comparable follow-up, no differences were found between groups.

  2. Wind accretion in binary stars II. Accretion rates

    E-Print Network [OSTI]

    Tom Theuns; Henri Boffin; Alain Jorissen

    1996-02-18T23:59:59.000Z

    Smoothed particle hydrodynamics (SPH) is used to estimate accretion rates of mass, linear and angular momentum in a binary system where one component undergoes mass loss through a wind. Physical parameters are chosen such as to model the alleged binary precursors of barium stars, whose chemical peculiarities are believed to result from the accretion of the wind from a companion formerly on the asymptotic giant branch (AGB). The binary system modelled consists of a 3 solar masses AGB star on the main sequence, in a 3AU circular orbit. Three-dimensional simulations are performed for gases with polytropic indices gamma=1, 1.1 and 1.5, to bracket more realistic situations that would include radiative cooling. Mass accretion rates are found to depend on resolution and we estimate typical values of 1-2% for the gamma=1.5 case and 8% for the other models. The highest resolution obtained (with 400k particles) corresponds to an accretor of linear size 16 solar radii. Despite being (in the gamma = 1.5 case) about ten times smaller than theoretical estimates based on the Bondi-Hoyle prescription, the SPH accretion rates remain large enough to explain the pollution of barium stars. Uncertainties in the current SPH rates remain however, due to the simplified treatment of the wind acceleration mechanism, as well as to the absence of any cooling prescription and to the limited numerical resolution. Angular momentum transfer leads to significant spin up of the accretor and can account for the rapid rotation of HD165141, a barium star with a young white dwarf companion and a rotation rate unusually large among K giants.

  3. Adaptive Distributed Parameter and Input Estimation in Plasma Tokamak Heat

    E-Print Network [OSTI]

    Boyer, Edmond

    . Keywords: Thermonuclear fusion, distributed parameter systems, input state and parameter estimation, adaptive infinite-dimensional estimation, Galerkin method 1. INTRODUCTION In a controlled thermonuclear fusion reactor, the plasma thermal diffusivity and heating energy play an important role

  4. Profile of Two-Higgs-Doublet-Model Parameter Space

    E-Print Network [OSTI]

    Abdul Wahab El Kaffas; Odd Magne Ogreid; Per Osland

    2007-09-26T23:59:59.000Z

    We review recent work on constraining the parameter space of the Two-Higgs-Doublet Model by theoretical and experimental results. Some characteristics of the model, in particular the distribution of masses in the surviving parameter space, are discussed.

  5. The Distributed Stigmergic Algorithm for Multi-parameter Optimization

    E-Print Network [OSTI]

    Silc, Jurij

    the independent geometrical parameters of the ro- tor and the stator. The efficiency of the algorithm is the process of finding the point in the parameter space P = {p1, p2, . . . , pD} where a cost function f

  6. Protocol choice and parameter optimization in decoy-state measurement-device-independent quantum key distribution

    E-Print Network [OSTI]

    Feihu Xu; He Xu; Hoi-Kwong Lo

    2014-06-01T23:59:59.000Z

    Measurement-device-independent quantum key distribution (MDI-QKD) has been demonstrated in both laboratories and field-tests using attenuated lasers combined with the decoy-state technique. Although researchers have studied various decoy-state MDI-QKD protocols with two or three decoy states, a clear comparison between these protocols is still missing. This invokes the question of how many types of decoy states are needed for practical MDI-QKD. Moreover, the system parameters to implement decoy-state MDI-QKD are only partially optimized in all previous works, which casts doubt on the actual performance of former demonstrations. Here, we present analytical and numerical decoy-state methods with one, two and three decoy states. We provide a clear comparison among these methods and find that two decoy states already enable a near optimal estimation and more decoy states cannot improve the key rate much in either asymptotic or finite-data settings. Furthermore, we perform a full optimization of system parameters and show that full optimization can significantly improve the key rate in the finite-data setting. By simulating a real experiment, we find that full optimization can increase the key rate by more than one order of magnitude compared to non-optimization. A local search method to optimize efficiently the system parameters is proposed. This method can be four orders of magnitude faster than a trivial exhaustive search to achieve a similar optimal key rate. We expect that this local search method could be valuable for general fields in physics.

  7. Sensitivity of transient synchrotron radiation to tokamak plasma parameters

    SciTech Connect (OSTI)

    Fisch, N.J.; Kritz, A.H.

    1988-12-01T23:59:59.000Z

    Synchrotron radiation from a hot plasma can inform on certain plasma parameters. The dependence on plasma parameters is particularly sensitive for the transient radiation response to a brief, deliberate, perturbation of hot plasma electrons. We investigate how such a radiation response can be used to diagnose a variety of plasma parameters in a tokamak. 18 refs., 13 figs.

  8. Precision Measurement of Neutrino Oscillation Parameters and Investigation of Nuclear

    E-Print Network [OSTI]

    Desbrun, Mathieu

    Precision Measurement of Neutrino Oscillation Parameters and Investigation of Nuclear Georeactor thanks. #12;v Abstract A combined analysis of examining the neutrino oscillation parameters and investiga of the neutrino oscillation parame- ters, including the georeactor power as a free parameter, are tan2 12 = 0

  9. OPTIMIZATION OF STELLARATOR REACTOR PARAMETERS J. F. Lyon1

    E-Print Network [OSTI]

    OPTIMIZATION OF STELLARATOR REACTOR PARAMETERS J. F. Lyon1 , L.P. Ku2 , P. Garabedian3 , L. El-average) approach for optimizing the main reactor parameters allows study of the relationship between global developed to optimize the main reactor parameters (, the average magnetic field on axis , etc

  10. Multiport solid-state imager characterization at variable pixel rates

    SciTech Connect (OSTI)

    Yates, G.J.; Albright, K.A. [Los Alamos National Lab., NM (United States); Turko, B.T. [Lawrence Berkeley Lab., CA (United States)

    1993-08-01T23:59:59.000Z

    The imaging performance of an 8-port Full Frame Transfer Charge Coupled Device (FFT CCD) as a function of several parameters including pixel clock rate is presented. The device, model CCD- 13, manufactured by English Electric Valve (EEV) is a 512 {times} 512 pixel array designed with four individual programmable bidirectional serial registers and eight output amplifiers permitting simultaneous readout of eight segments (128 horizontal {times} 256 vertical pixels) of the array. The imager was evaluated in Los Alamos National Laboratory`s High-Speed Solid-State Imager Test Station at true pixel rates as high as 50 MHz for effective imager pixel rates approaching 400 MHz from multiporting. Key response characteristics measured include absolute responsivity, Charge-Transfer-Efficiency (CTE), dynamic range, resolution, signal-to-noise ratio, and electronic and optical crosstalk among the eight video channels. Preliminary test results and data obtained from the CCD-13 will be presented and the versatility/capabilities of the test station will be reviewed.

  11. Release rates from partitioning and transmutation waste packages

    SciTech Connect (OSTI)

    Lee, W.W.L. (Lawrence Berkeley Lab., CA (United States)); Choi, Jor-Shan (Lawrence Livermore National Lab., CA (United States))

    1991-12-01T23:59:59.000Z

    Partitioning the actinides in light-water reactor spent fuel and transmuting them in actinide-burning liquid-metal reactors has been proposed as a potential method for reducing the public risks from geologic disposal of nuclear waste. As a first step towards quantifying the benefits for waste disposal of actinide burning, we have calculated the release rates of key radionuclides from waste packages resulting from actinide burning, and compare them with release rates from LWR spent fuel destined for disposal at the potential repository at Yucca Mountain. The wet-drip water-contact mode has been used. Analytic methods and parameter values are very similar to those used for assessing Yucca Mountain as a potential repository. Once released, the transport characteristics of radionuclides will be largely determined by site geology. For the most important nuclides such as I-129 and {Tc}-99, which are undiminished by actinide-burning reactors, it is not surprising that actinide burning offers little reduction in releases. For important actinides such as Np-237 and Pu isotopes, which are reduced in inventory, the releases are not reduced because the release rates are proportional to solubility, rather than inventory.

  12. The use of segmented cathode of a drift tube for designing a track detector with a high rate capability

    E-Print Network [OSTI]

    Kuchinskiy, N A; Duginov, V N; Zyazyulya, F E; Korenchenko, A S; Kolesnikov, A O; Kravchuk, N P; Movchan, S A; Rudenko, A I; Smirnov, V S; Khomutov, N V; Chekhovsky, V A

    2013-01-01T23:59:59.000Z

    Detector rate capability is one of the main parameters for designing a new detector for high energy physics due to permanent rise of the beam luminosity of modern accelerators. One of the widely used detectors for particle track reconstruction is a straw detector based on drift tubes. The rate capability of such detectors is limited by the parameters of readout electronics. The traditional method of increasing detector rate capability is increasing their granularity (a number of readout channels) by reducing the straw diameter and/or by dividing the straw anode wire into two parts (for decreasing the rate per readout channel). A new method of designing straw detectors with a high rate capability is presented and tested. The method is based on dividing the straw cathode into parts and independent readout of each part.

  13. An Examination of Harvest Rates and Brood-Take Rates as

    E-Print Network [OSTI]

    An Examination of Harvest Rates and Brood-Take Rates as Management Strategies to Assist Recovery of Resource Management Project Number: 546 Title of Project: An Examination of Harvest Rates and Brood-Take Rates as Management Strategies to Assist Recovery of Cowichan River Chinook Salmon Examining Committee

  14. HEART RATE AS A MONITOR FOR METABOLIC RATE IN CAPTIVE JUVENILE STELLER SEA LIONS (EUMETOPIAS JUBATUS)

    E-Print Network [OSTI]

    HEART RATE AS A MONITOR FOR METABOLIC RATE IN CAPTIVE JUVENILE STELLER SEA LIONS (EUMETOPIAS COLUMBIA 0Jan M. Mcl'hee, 2001 #12;ABSTRACT The potential use of heart rate to monitor energy expenditure a relationship exists between heart rate @I) and oxygen consumption ( ~ 0 ~ )in captive sea lions while swimming

  15. T3PS: Tool for Parallel Processing in Parameter Scans

    E-Print Network [OSTI]

    Maurer, Vinzenz

    2015-01-01T23:59:59.000Z

    T3PS is a program that can be used to quickly design and perform parameter scans while easily taking advantage of the multi-core architecture of current processors. It takes an easy to read and write parameter scan definition file format as input. Based on the parameter ranges and other options contained therein, it distributes the calculation of the parameter space over multiple processes and possibly computers. The derived data is saved in a plain text file format readable by most plotting software. The supported scanning strategies include: grid scan, random scan, Markov Chain Monte Carlo, numerical optimization. Several example parameter scans are shown and compared with results in the literature.

  16. FUZZY SUPERNOVA TEMPLATES. II. PARAMETER ESTIMATION

    SciTech Connect (OSTI)

    Rodney, Steven A. [Department of Physics and Astronomy, Johns Hopkins University, Baltimore, MD 21218 (United States); Tonry, John L., E-mail: rodney@jhu.ed, E-mail: jt@ifa.hawaii.ed [Institute for Astronomy, University of Hawaii, Honolulu, HI 96822 (United States)

    2010-05-20T23:59:59.000Z

    Wide-field surveys will soon be discovering Type Ia supernovae (SNe) at rates of several thousand per year. Spectroscopic follow-up can only scratch the surface for such enormous samples, so these extensive data sets will only be useful to the extent that they can be characterized by the survey photometry alone. In a companion paper we introduced the Supernova Ontology with Fuzzy Templates (SOFT) method for analyzing SNe using direct comparison to template light curves, and demonstrated its application for photometric SN classification. In this work we extend the SOFT method to derive estimates of redshift and luminosity distance for Type Ia SNe, using light curves from the Sloan Digital Sky Survey (SDSS) and Supernova Legacy Survey (SNLS) as a validation set. Redshifts determined by SOFT using light curves alone are consistent with spectroscopic redshifts, showing an rms scatter in the residuals of rms{sub z} = 0.051. SOFT can also derive simultaneous redshift and distance estimates, yielding results that are consistent with the currently favored {Lambda}CDM cosmological model. When SOFT is given spectroscopic information for SN classification and redshift priors, the rms scatter in Hubble diagram residuals is 0.18 mag for the SDSS data and 0.28 mag for the SNLS objects. Without access to any spectroscopic information, and even without any redshift priors from host galaxy photometry, SOFT can still measure reliable redshifts and distances, with an increase in the Hubble residuals to 0.37 mag for the combined SDSS and SNLS data set. Using Monte Carlo simulations, we predict that SOFT will be able to improve constraints on time-variable dark energy models by a factor of 2-3 with each new generation of large-scale SN surveys.

  17. Seismicity parameters preceding moderate to major earthquakes

    SciTech Connect (OSTI)

    von Seggern, D.; Alexander, S.S.; Baag, C.

    1981-10-10T23:59:59.000Z

    Seismic events reported in the bulletins of the two large arrays, LASA and NORSAR, were merged with those from the NEIS bulletin for the period 1970-1977. Using a lower cutoff of m/sub b/ = 5.8, 510 'main shocks' within the P range of LASA or NORSAR were selected for this period; and various seismicity trends prior to them were investigated. A search for definite foreshocks, based on a significantly short time delay to the main shock, revealed that the true rate of foreshock occurrence was less than 20%. Foreshocks are almost exclusively associated with shallow (h<100 km) main shocks. Averaging shows that the seismicity level around the main shock increases somewhat for 10 days before main shocks; this feature peaks in the last 3--4 hours prior to the main shocks. Again by averaging, the seismicity about main shocks is shown to tend with time toward the main shock as its origin time is approached, but the average effect is small (approx.10% change).Using a new variable to track the departures from both spatial and temporal randomness, the Poisson-like behavior of deeper seismicity (>100 km) was demonstrated. For shallow events (<100 km) this variable reveals numerous instances of clustering and spatial-temporal seismic gaps, with little tendency toward a uniformity of behavior prior to main shocks. A statistical test of the validity of seismic precursors was performed for approximately 90 main shock regions which had sufficient seismicity. Using a five-variable vector, (interevent time, interevent distance, magnitude, epicentral distance to main shock, and depth difference relative to main shock) for each event in a 'precursory' time window of 500 days before the main shock and for each event in a 'normal' time window of 500 days before that, the null hypothesis of equal vector means between the two groups was tested. At 90% confidence levels, less than 30% of the main shock regions were thus found to exhibit precursory seismicity changes.

  18. The Escape Rate of a Molecule

    E-Print Network [OSTI]

    Andreas Knauf; Markus Krapf

    2008-05-06T23:59:59.000Z

    We show existence and give an implicit formula for the escape rate of the n-centre problem of celestial mechanics for high energies. Furthermore we give precise computable estimates of this rate. This exponential decay rate plays an important role especially in semiclassical scattering theory of n-atomic molecules. Our result shows that the diameter of a molecule is measurable in a (classical) high-energy scattering experiment.

  19. Effect of process parameters on properties of argon–nitrogen plasma for titanium nitride film deposition

    SciTech Connect (OSTI)

    Saikia, Partha; Kakati, Bharat [Centre of Plasma Physics, Institute for Plasma Research, Nazirakhat, Sonapur-782 402, Kamrup, Assam (India)] [Centre of Plasma Physics, Institute for Plasma Research, Nazirakhat, Sonapur-782 402, Kamrup, Assam (India)

    2013-11-15T23:59:59.000Z

    In this study, the effect of working pressure and input power on the physical properties and sputtering efficiencies of argon–nitrogen (Ar/N{sub 2}) plasma in direct current magnetron discharge is investigated. The discharge in Ar/N{sub 2} is used to deposit TiN films on high speed steel substrate. The physical plasma parameters are determined by using Langmuir probe and optical emission spectroscopy. On the basis of the different reactions in the gas phase, the variation of plasma parameters and sputtering rate are explained. A prominent change of electron temperature, electron density, ion density, and degree of ionization of Ar is found as a function of working pressure and input power. The results also show that increasing working pressure exerts a negative effect on film deposition rate while increasing input power has a positive impact on the same. To confirm the observed physical properties and evaluate the texture growth as a function of deposition parameters, x-ray diffraction study of deposited TiN films is also done.

  20. CM-1-H Wholesale Power Rate Schedule

    Broader source: Energy.gov [DOE]

    Availability:This rate schedule shall be available to the South Mississippi Electric Power Association, Municipal Energy Agency of Mississippi, and Mississippi Delta Energy Agency (hereinafter...

  1. Photovoltaic Degradation Rates -- An Analytical Review

    SciTech Connect (OSTI)

    Jordan, D. C.; Kurtz, S. R.

    2012-06-01T23:59:59.000Z

    As photovoltaic penetration of the power grid increases, accurate predictions of return on investment require accurate prediction of decreased power output over time. Degradation rates must be known in order to predict power delivery. This article reviews degradation rates of flat-plate terrestrial modules and systems reported in published literature from field testing throughout the last 40 years. Nearly 2000 degradation rates, measured on individual modules or entire systems, have been assembled from the literature, showing a median value of 0.5%/year. The review consists of three parts: a brief historical outline, an analytical summary of degradation rates, and a detailed bibliography partitioned by technology.

  2. Convergence Rates with Inexact Nonexpansive Operators

    E-Print Network [OSTI]

    Jingwei Liang

    2014-04-18T23:59:59.000Z

    Apr 18, 2014 ... Abstract: In this paper, we present a convergence rate analysis for the inexact Krasnosel'ski{\\u{\\i}}-Mann iteration built from nonexpansive ...

  3. "EIA-914 Production Weighted Response Rates, Percent"

    U.S. Energy Information Administration (EIA) Indexed Site

    EIA-914 Production Weighted Response Rates, Percent" "Areas",38353,38384,38412,38443,38473,38504,38534,38565,38596,38626,38657,38687,38718,38749,38777,"application...

  4. Rate Schedule COTP-T3

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    COTP-T3 (Supersedes Schedule COTP-T2) UNITED STATES DEPARTMENT OF ENERGY WESTERN AREA POWER ADMINISTRATION CALIFORNIA-OREGON TRANSMISSION PROJECT SCHEDULE OF RATE FOR...

  5. Rate Schedule CV-NWT5

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NWT5 (Supersedes Schedule CV-NWT4) UNITED STATES DEPARTMENT OF ENERGY WESTERN AREA POWER ADMINISTRATION CENTRAL VALLEY PROJECT SCHEDULE OF RATE FOR NETWORK INTEGRATION TRANSMISSION...

  6. Rate Schedule CV-SUR4

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SUR4 (Supersedes Schedule CV-SUR3) UNITED STATES DEPARTMENT OF ENERGY WESTERN AREA POWER ADMINISTRATION CENTRAL VALLEY PROJECT SCHEDULE OF RATE FOR SUPPLEMENTAL RESERVE SERVICE...

  7. Rate Schedule CV-F13

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    F13 (Supersedes Schedule CV-F12) UNITED STATES DEPARTMENT OF ENERGY WESTERN AREA POWER ADMINISTRATION CENTRAL VALLEY PROJECT SCHEDULE OF RATES FOR BASE RESOURCE AND FIRST...

  8. Rate Schedule PACI-T3

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PACI-T3 (Supersedes Schedule PACI -T2) UNITED STATES DEPARTMENT OF ENERGY WESTERN AREA POWER ADMINISTRATION PACIFIC ALTERNATING CURRENT INTERTIE PROJECT SCHEDULE OF RATE FOR...

  9. Rate Schedule CV-RFS4

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    RFS4 (Supersedes Schedule CV-RFS3) UNITED STATES DEPARTMENT OF ENERGY WESTERN AREA POWER ADMINISTRATION CENTRAL VALLEY PROJECT SCHEDULE OF RATE FOR REGULATION AND FREQUENCY...

  10. Rate Schedule CV-EID4

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    EID4 (Supersedes Schedule CV-EID3) UNITED STATES DEPARTMENT OF ENERGY WESTERN AREA POWER ADMINISTRATION CENTRAL VALLEY PROJECT SCHEDULE OF RATE FOR ENERGY IMBALANCE SERVICE...

  11. Rate Schedule CV-SPR4

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SPR4 (Supersedes Schedule CV-SPR3) UNITED STATES DEPARTMENT OF ENERGY WESTERN AREA POWER ADMINISTRATION CENTRAL VALLEY PROJECT SCHEDULE OF RATE FOR SPINNING RESERVE SERVICE...

  12. Method of controlling fusion reaction rates

    DOE Patents [OSTI]

    Kulsrud, R.M.; Furth, H.P.; Valeo, E.J.; Goldhaber, M.

    1983-05-09T23:59:59.000Z

    This invention relates to a method of controlling the reaction rates in a nuclear fusion reactor; and more particularly, to the use of polarized nuclear fuel.

  13. Confronting the Graduation Rate Crisis in Texas

    E-Print Network [OSTI]

    Losen, Daniel; Orfield, Gary; Balfanz, Robert

    2006-01-01T23:59:59.000Z

    Guide to Graduation Policy and Rates, Editorial Projects inthe Graduation Crisis. Bethesda, MD: Editorial Projects inthe Graduation Crisis. Bethesda, MD: Editorial Projects in

  14. 2006 Texas High Plains Cotton Variety Ratings

    E-Print Network [OSTI]

    Mukhtar, Saqib

    Average Incidence of Wilt Date of Wilt Rating Earth 0.0 0.0 Sept. 8 Brownfield 5.5 1.8 Aug. 28 Petersburg

  15. Home energy rating systems: Program descriptions

    SciTech Connect (OSTI)

    Vine, E.; Barnes, B.K.; Ritschard, R.

    1987-02-01T23:59:59.000Z

    This report contains the descriptions of home energy rating and labelling programs (HERS) that were surveyed in January 1986 as part of a national evaluation of HERS.

  16. Embedding parameters in ab initio theory to develop approximations based on molecular similarity

    E-Print Network [OSTI]

    Tanha, Matteus; Kaul, Shiva; Cappiello, Alexander; Gordon, Geoffrey J; Yaron, David J

    2015-01-01T23:59:59.000Z

    A means to take advantage of molecular similarity to lower the computational cost of electronic structure theory is explored, in which parameters are embedded into a low-cost, low-level (LL) ab initio model and adjusted to obtain agreement with results from a higher-level (HL) ab initio model. A parametrized LL (pLL) model is created by multiplying selected matrix elements of the Hamiltonian operators by scaling factors that depend on element types. Various schemes for applying the scaling factors are compared, along with the impact of making the scaling factors linear functions of variables related to bond lengths, atomic charges, and bond orders. The models are trained on ethane and ethylene, substituted with -NH2, -OH and -F, and tested on substituted propane, propylene and t-butane. Training and test datasets are created by distorting the molecular geometries and applying uniform electric fields. The fitted properties include changes in total energy arising from geometric distortions or applied fields, an...

  17. Application of GRS method to evaluation of uncertainties of calculation parameters of perspective sodium-cooled fast reactor

    SciTech Connect (OSTI)

    Peregudov, A.; Andrianova, O.; Raskach, K.; Tsibulya, A. [Inst. for Physics and Power Engineering, Bondarenko Square 1, Obninsk 244033, Kaluga Region (Russian Federation)

    2012-07-01T23:59:59.000Z

    A number of recent studies have been devoted to the estimation of errors of reactor calculation parameters by the GRS (Generation Random Sampled) method. This method is based on direct sampling input data resulting in formation of random sets of input parameters which are used for multiple calculations. Once these calculations are performed, statistical processing of the calculation results is carried out to determine the mean value and the variance of each calculation parameter of interest. In our study this method is used for estimation of errors of calculation parameters (K{sub eff}, power density, dose rate) of a perspective sodium-cooled fast reactor. Neutron transport calculations were performed by the nodal diffusion code TRIGEX and Monte Carlo code MMK. (authors)

  18. Surface Albedo/BRDF Parameters (Terra/Aqua MODIS)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Trishchenko, Alexander

    Spatially and temporally complete surface spectral albedo/BRDF products over the ARM SGP area were generated using data from two Moderate Resolution Imaging Spectroradiometer (MODIS) sensors on Terra and Aqua satellites. A landcover-based fitting (LBF) algorithm is developed to derive the BRDF model parameters and albedo product (Luo et al., 2004a). The approach employs a landcover map and multi-day clearsky composites of directional surface reflectance. The landcover map is derived from the Landsat TM 30-meter data set (Trishchenko et al., 2004a), and the surface reflectances are from MODIS 500m-resolution 8-day composite products (MOD09/MYD09). The MOD09/MYD09 data are re-arranged into 10-day intervals for compatibility with other satellite products, such as those from the NOVA/AVHRR and SPOT/VGT sensors. The LBF method increases the success rate of the BRDF fitting process and enables more accurate monitoring of surface temporal changes during periods of rapid spring vegetation green-up and autumn leaf-fall, as well as changes due to agricultural practices and snowcover variations (Luo et al., 2004b, Trishchenko et al., 2004b). Albedo/BRDF products for MODIS on Terra and MODIS on Aqua, as well as for Terra/Aqua combined dataset, are generated at 500m spatial resolution and every 10-day since March 2000 (Terra) and July 2002 (Aqua and combined), respectively. The purpose for the latter product is to obtain a more comprehensive dataset that takes advantages of multi-sensor observations (Trishchenko et al., 2002). To fill data gaps due to cloud presence, various interpolation procedures are applied based on a multi-year observation database and referring to results from other locations with similar landcover property. Special seasonal smoothing procedure is also applied to further remove outliers and artifacts in data series.

  19. Non-linear analysis of advanced high-phase number induction machines for adjustable speed drive applications

    E-Print Network [OSTI]

    Qahtany, Nasser H.

    2002-01-01T23:59:59.000Z

    This study focuses on the effect of high order phases on electrical machines' parameters and performance. A general approach has been conducted using the induction motor equivalent circuit, winding function and conventional design methods...

  20. Parameter Estimation from an Optimal Projection in a Local Environment

    E-Print Network [OSTI]

    A. Bijaoui; A. Recio-Blanco; P. de Laverny

    2008-11-03T23:59:59.000Z

    The parameter fit from a model grid is limited by our capability to reduce the number of models, taking into account the number of parameters and the non linear variation of the models with the parameters. The Local MultiLinear Regression (LMLR) algorithms allow one to fit linearly the data in a local environment. The MATISSE algorithm, developed in the context of the estimation of stellar parameters from the Gaia RVS spectra, is connected to this class of estimators. A two-steps procedure was introduced. A raw parameter estimation is first done in order to localize the parameter environment. The parameters are then estimated by projection on specific vectors computed for an optimal estimation. The MATISSE method is compared to the estimation using the objective analysis. In this framework, the kernel choice plays an important role. The environment needed for the parameter estimation can result from it. The determination of a first parameter set can be also avoided for this analysis. These procedures based on a local projection can be fruitfully applied to non linear parameter estimation if the number of data sets to be fitted is greater than the number of models.