Sample records for rapid update cycle

  1. A Climatology of Midlatitude Mesoscale Convective Vortices in the Rapid Update Cycle

    E-Print Network [OSTI]

    Johnson, Richard H.

    A Climatology of Midlatitude Mesoscale Convective Vortices in the Rapid Update Cycle ERIC P. JAMES of mesoscale convective vortices (MCVs) occurring in the state of Oklahoma during the late spring and summer, true MCVs represent only about 20% of the mesoscale relative vorticity maxima detected by the algorithm

  2. Assessment of the 60 km rapid update cycle (RUC) with near real-time aircraft reports. Project report

    SciTech Connect (OSTI)

    Cole, R.E.; Richard, C.; Kim, S.; Bailey, D.

    1998-07-15T23:59:59.000Z

    The National Aeronautics and Space Administration (NASA) is developing the Center-TRA-CON Advisory System (CTAS), a set of Air Traffic Management (ATM) Decision Support Tools (DST) for en route (Center) and terminal (TRACON) airspace designed to enable controllers to increase capacity and flight efficiency. A crucial component of the CTAS, or any ATM DST, is the computation of the time-of-flight of aircraft along flight path segments. Earlier NASA studies show that accurate knowledge of the wind through which the aircraft are flying is required to estimate time-of-flight accurately. There are current envisioned to be two sources of wind data for CTAS: The Rapid Update Cycle (RUC) for the Center airspace, a numerical model developed by the National Oceanic and Atmospheric Administration (NOAA) Forecast System Laboratory (FSL) and run operationally by the National Weather Service (NWS) National Center for Environmental Prediction (NCEP); and The Integrated Terminal Weather System (ITWS) Terminal Winds (TW) for the TRACON airspace, developed at MIT Lincoln Laboratory under funding from the Federal Aviation Administration (FAA). This study has three goals: (1) determine the errors in the baseline 60 km resolution RUC forecast wind fields relative to the needs of en route DSTs such as CTAS, (2) determine the benefit of using the TW algorithm to refine the RUC forecast wind fields with near real-time Meteorological Data Collection and Reporting System (MDCRS) reports, and (3) identify factors that influence wind errors in order to improve accuracy and estimate errors in real time.

  3. Update on Breakout Sessions: Rapid City & Oklahoma City

    Broader source: Energy.gov [DOE]

    Presentation covers an update on the Rapid City and Oklahoma breakout sessions and is given at the FUPWG 2006 Spring meeting, held on May 3-4, 2006 in Atlanta, Georgia.

  4. Rapid cycling medical synchrotron and beam delivery system

    DOE Patents [OSTI]

    Peggs, Stephen G. (Port Jefferson, NY); Brennan, J. Michael (East Northport, NY); Tuozzolo, Joseph E. (Sayville, NY); Zaltsman, Alexander (Commack, NY)

    2008-10-07T23:59:59.000Z

    A medical synchrotron which cycles rapidly in order to accelerate particles for delivery in a beam therapy system. The synchrotron generally includes a radiofrequency (RF) cavity for accelerating the particles as a beam and a plurality of combined function magnets arranged in a ring. Each of the combined function magnets performs two functions. The first function of the combined function magnet is to bend the particle beam along an orbital path around the ring. The second function of the combined function magnet is to focus or defocus the particle beam as it travels around the path. The radiofrequency (RF) cavity is a ferrite loaded cavity adapted for high speed frequency swings for rapid cycling acceleration of the particles.

  5. An Updated Evaluation of ReCycle Abhishek Tiwari and Josep Torrellas

    E-Print Network [OSTI]

    Torrellas, Josep

    An Updated Evaluation of ReCycle Abhishek Tiwari and Josep Torrellas Department of Computer Science stage. ReCycle was proposed in ISCA 2007 as a framework for comprehensively applying cycle time stealing with a period close to the average latency of the stages. This paper duplicates the evaluation of ReCycle

  6. Rapid thermal cycling of metal-supported solid oxide fuel cellmembranes

    SciTech Connect (OSTI)

    Matus, Yuriy B.; De Jonghe, Lutgard C.; Jacobson, Craig P.; Visco, Steven J.

    2004-01-02T23:59:59.000Z

    Solid oxide fuel cell (SOFC) membranes were developed in which zirconia-based electrolyte thin films were supported by a composite metal/ceramic electrode, and were subjected to rapid thermal cycling between 200 and 800 C. The effects of this cycling on membrane performance were evaluated. The membranes, not yet optimized for performance, showed a peak power density of 350mW/cm2at 900 C in laboratory-sized SOFCs that was not affected by the thermal cycling. This resistance to cycling degradation is attributed to the close matching of thermal expansion coefficient of the cermet support electrode with that of the zirconia electrolyte.

  7. Sun-Like Magnetic Cycles in the Rapidly-Rotating Young Solar Analog HD 30495

    E-Print Network [OSTI]

    Egeland, Ricky; Hall, Jeffrey C; Henry, Gregory W

    2015-01-01T23:59:59.000Z

    A growing body of evidence suggests that multiple dynamo mechanisms can drive magnetic variability on different timescales, not only in the Sun but also in other stars. Many solar activity proxies exhibit a quasi-biennial ($\\sim$2 year) variation, which is superimposed upon the dominant 11 year cycle. A well-characterized stellar sample suggests at least two different relationships between rotation period and cycle period, with some stars exhibiting long and short cycles simultaneously. Within this sample, the solar cycle periods are typical of a more rapidly rotating star, implying that the Sun might be in a transitional state or that it has an unusual evolutionary history. In this work, we present new and archival observations of dual magnetic cycles in the young solar analog HD 30495, an $\\sim$1 Gyr-old G1.5V star with a rotation period near 11 days. This star falls squarely on the relationships established by the broader stellar sample, with short-period variations at $\\sim$1.7 years and a long cycle of $...

  8. A proposed second harmonic acceleration system for the Intense Pulsed Neutron Source Rapid Cycling Synchrotron

    SciTech Connect (OSTI)

    Norem, J.; Brandeberry, F.; Rauchas, A.

    1983-08-01T23:59:59.000Z

    The Rapid Cycling Synchrotron (RCS) of the Intense Pulsed Neutron Source (IPNS) operating at Argonne National Laboratory is presently producing intensities of 2-2.5 x 10/sup 12/ protons per pulse (ppp) with the addition of a new ion source. This intensity is close to the space charge limit of the machine, estimated at about 3 x 10/sup 12/ ppp, depending somewhat on the available aperture. With the present good performance in mind, accelerator improvements are being directed at increasing beam intensities for neutron science, lowering acceleration losses to minimize activation, and gaining better control of the beam so that losses can be made to occur when and where they can be most easily controlled. On the basis of preliminary measurements, the authors are now proposing a third cavity for the RF system which would provide control of the longitudinal bunch shape during the cycle which would permit raising the effective space charge limit of the accelerator and reducing losses.

  9. A U d t d E l ti f R C lAn Updated Evaluation of ReCycle Abhishek Tiwari and Josep Torrellas

    E-Print Network [OSTI]

    Torrellas, Josep

    A U d t d E l ti f R C lAn Updated Evaluation of ReCycle Abhishek Tiwari and Josep Torrellas D f C Torrellas, University of Illinois #12;What is ReCycle? [Tiwari ISCA07] · Context: Process ariation creates unchecked, clock period is the delay of slowest pipeline stage · ReCycle proposed in ISCA 2007

  10. Proposed second harmonic acceleration system for the intense pulsed neutron source rapid cycling synchrotron

    SciTech Connect (OSTI)

    Norem, J.; Brandeberry, F.; Rauchas, A.

    1983-01-01T23:59:59.000Z

    The Rapid Cycling Synchrotron (RCS) of the Intense Pulsed Neutron Source (IPNS) operating at Argonne National Laboratory is presently producing intensities of 2 to 2.5 x 10/sup 12/ protons per pulse (ppp) with the addition of a new ion source. This intensity is close to the space charge limit of the machine, estimated at approx.3 x 10/sup 12/ ppp, depending somewhat on the available aperture. With the present good performance in mind, accelerator improvements are being directed at: (1) increasing beam intensities for neutron science; (2) lowering acceleration losses to minimize activation; and (3) gaining better control of the beam so that losses can be made to occur when and where they can be most easily controlled. On the basis of preliminary measurements, we are now proposing a third cavity for the RF systems which would provide control of the longitudinal bunch shape during the cycle which would permit raising the effective space charge limit of the accelerator and reducing losses.

  11. Quantifying the Improvements in Rapid Prototyping and Product Life Cycle Performance Created by Machining

    E-Print Network [OSTI]

    2013-01-01T23:59:59.000Z

    to laser ablation and 3D printing for rapid prototypinglaser ablation, and 3D printing. 2.1 ExperimentalMachining, Laser ablation, 3D printing, Microfluidics, Value

  12. Quantifying the Improvements in Rapid Prototyping and Product Life Cycle Performance Created by Machining

    E-Print Network [OSTI]

    2013-01-01T23:59:59.000Z

    to laser ablation and 3D printing for rapid prototypingMachining, Laser ablation, 3D printing, Microfluidics, Valuein new ways (e.g. , 3D printing to create products beyond

  13. Update of distillers grains displacement ratios for corn ethanol life-cycle analysis.

    SciTech Connect (OSTI)

    Arora, S.; Wu, M.; Wang, M.; Energy Systems

    2011-02-01T23:59:59.000Z

    Production of corn-based ethanol (either by wet milling or by dry milling) yields the following coproducts: distillers grains with solubles (DGS), corn gluten meal (CGM), corn gluten feed (CGF), and corn oil. Of these coproducts, all except corn oil can replace conventional animal feeds, such as corn, soybean meal, and urea. Displacement ratios of corn-ethanol coproducts including DGS, CGM, and CGF were last updated in 1998 at a workshop at Argonne National Laboratory on the basis of input from a group of experts on animal feeds, including Prof. Klopfenstein (University of Nebraska, Lincoln), Prof. Berger (University of Illinois, Urbana-Champaign), Mr. Madson (Rapheal Katzen International Associates, Inc.), and Prof. Trenkle (Iowa State University) (Wang 1999). Table 1 presents current dry milling coproduct displacement ratios being used in the GREET model. The current effort focuses on updating displacement ratios of dry milling corn-ethanol coproducts used in the animal feed industry. Because of the increased availability and use of these coproducts as animal feeds, more information is available on how these coproducts replace conventional animal feeds. To glean this information, it is also important to understand how industry selects feed. Because of the wide variety of available feeds, animal nutritionists use commercial software (such as Brill Formulation{trademark}) for feed formulation. The software recommends feed for the animal on the basis of the nutritional characteristics, availability, and price of various animal feeds, as well as on the nutritional requirements of the animal (Corn Refiners Association 2006). Therefore, feed formulation considers both the economic and the nutritional characteristics of feed products.

  14. Hardware In The Loop Simulator in UAV Rapid Development Life Cycle

    E-Print Network [OSTI]

    Adiprawita, Widyawardana; Semibiring, Jaka

    2008-01-01T23:59:59.000Z

    Field trial is very critical and high risk in autonomous UAV development life cycle. Hardware in the loop (HIL) simulation is a computer simulation that has the ability to simulate UAV flight characteristic, sensor modeling and actuator modeling while communicating in real time with the UAV autopilot hardware. HIL simulation can be used to test the UAV autopilot hardware reliability, test the closed loop performance of the overall system and tuning the control parameter. By rigorous testing in the HIL simulator, the risk in the field trial can be minimized.

  15. PFB coal fired combined cycle development program. Commercial plant requirements definition update (Task 1. 1)

    SciTech Connect (OSTI)

    Not Available

    1980-05-01T23:59:59.000Z

    The Coal Fired Combined Cycle (CFCC) power system thermodynamic cycle is illustrated schematically. Pressurized air supplied at the discharge of gas turbine compressors is ducted to the pressure vessel of pressurized, fluidized-bed, combustor-steam generator modules. The air is introduced in parallel to the beds, entering through distribution grids beneath each bed. Steam generation tubes are buried within the beds and are also arranged as membrane tube walls enclosing the four sides. Crushed coal (1/4 inch x 0) is pneumatically fed at locations just above the air inlet grids at the bottom of each bed. Dolomite is similarly fed to the individual beds. The coal is burned at a temperature below the ash fusion point. Sulfur is removed in the fluid beds through reaction of the SO/sub 2/ with CaCO/sub 3/ and O/sub 2/ to form solid CaSO/sub 4/ and CO/sub 2/ gas. The combustion gases leave the beds at a temperature in the range of 1400/sup 0/F to 1750/sup 0/F, depending upon the plant load fraction, and combustion heat is also transferred from the bed to the steam generation tubes. For the PFB combustor at full load, approximately 39% of the heating value of the coal appears i the exhaust gas, 57% appears in the steam, and 4% is apportioned among various losses. The steam circuitry is the supercritical once-through type. Steam is generated at 3500 psi and 1000/sup 0/F and is reheated to 1000/sup 0/F after expansion through the high pressure section of the steam turbine. The exhaust gases from the fluidized beds, which entrain a high percentage of the coal ash as well as dolomite fines, are ducted to conventional cyclones and then to electrocyclones before being admitted to the gas turbine.

  16. Characterizing the Performance of a Proton-Transfer-Reaction Mass Spectrometer with a Rapid Cycling Tenax Preconcentrator

    SciTech Connect (OSTI)

    Garland, S.P.; Alexander, M.L.

    2006-01-01T23:59:59.000Z

    Volatile organic compounds (VOCs) are species of interest for atmospheric modeling, worker chemical exposure and medical studies. Sometimes the required detection limits for these compounds is below the capability of existing real-time instrumentation. Preconcentrators have been implemented as an inexpensive way to amplify chemical signals and improve detection limits. Proton-transfer-reaction mass spectrometry (PTR-MS) has been used as a tool for studying low concentrations of VOCs, but it lacks the capability to differentiate chemical signal contributions from isobaric compounds. In this work, behavior of a newly designed Tenax TA preconcentrator when coupled with a PTRMS is characterized. This novel preconcentrator design allows rapid temperature cycling, maintaining near real-time response. The preconcentrator was exposed to a sample gas of toluene in varying concentrations and loading times between and then thermally desorbed for analysis by PTR-MS. The effects of preconcentrating multiple analytes simultaneously were also investigated as well as the chromatographic effects of the preconcentrator. A linear behavior was observed when the integrated ion count rates (ICPS) from thermal desorption peaks were regressed against both varying loading times at a constant toluene concentration and varying concentrations with constant loading times. From these trends, it is possible to determine the concentration of a VOC by knowing its ICPS from thermal desorption peaks from a known preconcentration time. Peak height ion count rates representing ultimate detectability were amplified by factors up to 257 times the original signal, extending the range of the PTR-MS from 50pptv to nearly 250 parts per quadrillion. This corresponds to an ultimate sensitivity of 200 parts per quadrillion with 20 minute time resolution. Quantitative preconcentrator behavior was demonstrated using ICPS from these ion peaks and were amplified as much as 148 times their original signal. Results from multi-analyte desorption indicate that chromatographic separation is possible with a Tenax preconcentrator and further details are discussed. The dramatic increased in sensitivity with near real-time response, combined with chromatographic resolving capability opens up new areas of research requiring the detection of ultra-trace organic species using PTR-MS.

  17. Comparing Life-Cycle Costs of ESPCs and Appropriations-Funded Energy Projects: An Update to the 2002 Report

    SciTech Connect (OSTI)

    Shonder, John A [ORNL; Hughes, Patrick [ORNL; Atkin, Erica [ORNL

    2006-11-01T23:59:59.000Z

    A study was sponsored by FEMP in 2001 - 2002 to develop methods to compare life-cycle costs of federal energy conservation projects carried out through energy savings performance contracts (ESPCs) and projects that are directly funded by appropriations. The study described in this report follows up on the original work, taking advantage of new pricing data on equipment and on $500 million worth of Super ESPC projects awarded since the end of FY 2001. The methods developed to compare life-cycle costs of ESPCs and directly funded energy projects are based on the following tasks: (1) Verify the parity of equipment prices in ESPC vs. directly funded projects; (2) Develop a representative energy conservation project; (3) Determine representative cycle times for both ESPCs and appropriations-funded projects; (4) Model the representative energy project implemented through an ESPC and through appropriations funding; and (5) Calculate the life-cycle costs for each project.

  18. Update 1 to: A Dispersion Modeling Analysis of Downwash from...

    Office of Environmental Management (EM)

    Analysis of Downwash from Mirant's Potomac River Power Plant, Modeling Unit 1 Emissions in a Cycling Mode Update 1 to: A Dispersion Modeling Analysis of Downwash from...

  19. FUPWG Spring 2010 Meeting South Dakota: Washington Update

    Broader source: Energy.gov [DOE]

    Presentation covers an update on Washington given at the Spring 2010 Federal Utility Partnership Working Group (FUPWG) meeting in Rapid City, South Dakota.

  20. Washington Update

    Energy Savers [EERE]

    Text eere.energy.gov Federal Energy Management Program FederalUtility Partnership Working Group David McAndrew April 14, 2010 Providence RI Washington Update Federal Energy...

  1. nuclear power Update of the mit 2003

    E-Print Network [OSTI]

    Reuter, Martin

    #12;Future of nuclear power Update of the mit 2003 PROFESSOR JOHN M.DEUTCH Institute Professor. Update of the MIT 2003 Future of Nuclear Power Study 1 Massachusetts Institute of Technology, The Future Department of Chemistry DR.CHARLES W.FORSBERG Executive Director, MIT Nuclear Fuel Cycle Study Department

  2. Critical Update - Renwable Guidance Update

    Broader source: Energy.gov (indexed) [DOE]

    Renewable Update FUPWG May 1, 2007 Chandra Shah, National Renewable Energy Laboratory 303-384-7557, chandrashah@nrel.gov Presentation Overview * Energy Policy Act of 2005 (EPACT...

  3. Task Group 9 Update (Presentation)

    SciTech Connect (OSTI)

    Bosco, N.

    2014-04-01T23:59:59.000Z

    This presentation is a brief update of IEC TC82 QA Task Force, Group 9. Presented is an outline of the recently submitted New Work Item Proposal (NWIP) for a Comparative Thermal Cycling Test for CPV Modules to Differentiate Thermal Fatigue Durability.

  4. Update 5 to: A Dispersion Modeling Analysis of Downwash from...

    Office of Environmental Management (EM)

    5 to: A Dispersion Modeling Analysis of Downwash from Mirant's Potomac River Power Plant: Modeling Cycling Units 1, 2 plus One Baseload Unit Update 5 to: A Dispersion Modeling...

  5. EPA Diesel Update

    Broader source: Energy.gov (indexed) [DOE]

    EPA Diesel Update 2005 DEER Conference Bill Charmley EPAOffice of Transportation and Air Quality August 22, 2005 2 Overview * Implementation update on mobile source diesel...

  6. ESnet Update

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisitingContract ManagementDiscoveringESnet Update Winter 2008 Joint Techs Workshop

  7. ProGreen 2014 Colorado Climate Update

    E-Print Network [OSTI]

    · Complex Mountain topography · Solar energy and seasonal cycles drive our climate #12;Colorado has" and we LOVE IT! #12;Monitoring our Climate · Elements: temperature, precipitation, snow, wind, solarProGreen 2014 Colorado Climate Update Nolan Doesken Colorado State Climatologist Colorado Climate

  8. Plans, Updates, Regulatory Documents

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Stewardship Environmental Protection Obeying Environmental Laws Individual Permit Documents Individual Permit: Plans, Updates, Regulatory Documents1335769200000Plans...

  9. MONITORED GEOLOGIC REPOSITORY LIFE CYCLE COST ESTIMATE ASSUMPTIONS DOCUMENT

    SciTech Connect (OSTI)

    R.E. Sweeney

    2001-02-08T23:59:59.000Z

    The purpose of this assumptions document is to provide general scope, strategy, technical basis, schedule and cost assumptions for the Monitored Geologic Repository (MGR) life cycle cost (LCC) estimate and schedule update incorporating information from the Viability Assessment (VA) , License Application Design Selection (LADS), 1999 Update to the Total System Life Cycle Cost (TSLCC) estimate and from other related and updated information. This document is intended to generally follow the assumptions outlined in the previous MGR cost estimates and as further prescribed by DOE guidance.

  10. Solid state rapid thermocycling

    DOE Patents [OSTI]

    Beer, Neil Reginald; Spadaccini, Christopher

    2014-05-13T23:59:59.000Z

    The rapid thermal cycling of a material is targeted. A solid state heat exchanger with a first well and second well is coupled to a power module. A thermoelectric element is coupled to the first well, the second well, and the power module, is configured to transfer thermal energy from the first well to the second well when current from the power module flows through the thermoelectric element in a first direction, and is configured to transfer thermal energy from the second well to the first well when current from the power module flows through the thermoelectric element in a second direction. A controller may be coupled to the thermoelectric elements, and may switch the direction of current flowing through the thermoelectric element in response to a determination by sensors coupled to the wells that the amount of thermal energy in the wells falls below or exceeds a pre-determined threshold.

  11. Power Purchase Agreements Update

    Broader source: Energy.gov [DOE]

    Presentation covers an update on power purchase agreements and is given at the Spring 2011 Federal Utility Partnership Working Group (FUPWG) meeting.

  12. Electricity Monthly Update

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Electricity Monthly Update Explained Highlights The Highlights page features in the center a short article about a major event or an informative topic. The left column contains...

  13. Navy Technology Evaluation Update

    Broader source: Energy.gov [DOE]

    Presentation covers the Navy Technology Evaluation update at the Federal Utility Partnership Working Group (FUPWG) meeting, held on November 18-19, 2009.

  14. TINSSL Update | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    an electronic newsletter designed to help TINSSL members keep up to date on the latest SSL news and events. TINSSL Update, May 2014 TINSSL Update, March 2014 TINSSL Update,...

  15. Tracking Progress Last updated 12/12/2013 Once-Through Cooling 1

    E-Print Network [OSTI]

    Tracking Progress Last updated 12/12/2013 Once-Through Cooling 1 Once-Through Cooling Phase facilities to satisfy the policy. #12;Tracking Progress Last updated 12/12/2013 Once-Through Cooling 2-cycle evaporative cooling system.1 A minimum of 93 percent reduction is required compared to the design intake flow

  16. Electric Turbo Compounding Technology Update

    Broader source: Energy.gov (indexed) [DOE]

    Turbo Compounding Technology Update Electric Turbo Compounding Technology Update 15 August, 2007 Carl Vuk 15 August, 2007 Carl Vuk Electric Turbo Compounding Highlights Electric...

  17. Update of Greenland Ice Sheet Mass Loss: Exponential? 26 December 2012

    E-Print Network [OSTI]

    Hansen, James E.

    1 Update of Greenland Ice Sheet Mass Loss: Exponential? 26 December 2012 James Hansen and Makiko Sato Shepherd et al. (2012) provide an update of the mass loss by the Greenland ice sheet (and at the data seems warranted. A crucial question is how rapidly the Greenland (or Antarctic) ice sheet can

  18. Advances in rapid prototyping

    SciTech Connect (OSTI)

    Atwood, C.L.; McCarty, G.D.; Pardo, B.T.; Bryce, E.A.

    1993-12-31T23:59:59.000Z

    Recent advances in stereolithography and selective laser sintering have had a significant impact on the overall quality of parts produced using these rapid prototyping processes. The development and implementation of 3D System`s QuickCast{trademark} resin and software for building investment casting patterns have proven to be major steps toward fabricating highly accurate patterns with very good surface finishes. Sandia uses patterns generated from rapid prototyping processes to reduce the cycle time and cost of fabricating prototype parts in support of a Sandia National Laboratories managed program called FASTCAST. As participants in the Beta test program for QuickCast{trademark} resin and software, they experienced a steep learning curve and were able to build accurate parts in a short period of time. It is now possible, using this technology, to produce highly accurate prototype parts as well as acceptable firs article and small lots size production parts. They use the Selective Laser Sintering (SLS) process to fabricate prototype wax patterns for investment casting. DTM Corporation recently introduced the use of their polycarbonate material for fabricating investment casting patterns. The polycarbonate material is processed significantly faster, with improved strength, dimensional stability, and without a support structure during the build process. Sandia is currently changing from investment casting wax to polycarbonate for the fabrication of investment casting patterns using the SLS process. This presentation will focus on the successes with these new materials from the standpoints of application, accuracy, surface finish, and post processing. Also presented will be examples of parts manufactured by these processes.

  19. Updating the IACR Publication Infrastructure by a Preprint Server

    E-Print Network [OSTI]

    International Association for Cryptologic Research (IACR)

    Updating the IACR Publication Infrastructure by a Preprint Server Eli Biham Computer Science activities through a preprint server for timely and rapid dissemination of new results. No refereeing will oc- cur except for checking scope and super#12;cial compliance with IACR's goals and the preprint server

  20. Updating the IACR Publication Infrastructure by a Preprint Server

    E-Print Network [OSTI]

    International Association for Cryptologic Research (IACR)

    Updating the IACR Publication Infrastructure by a Preprint Server Eli Biham Computer Science a preprint server for timely and rapid dissemination of new results. No refereeing will oc- cur except for checking scope and superficial compliance with IACR's goals and the preprint server will be freely

  1. FUPWG Spring 2010 Providence: Washington Update | Department...

    Energy Savers [EERE]

    Spring 2010 Providence: Washington Update FUPWG Spring 2010 Providence: Washington Update Presentation covers an update on Washington and is given at the Spring 2010 Federal...

  2. PPA Tools and Update

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PPA Tools & Update Chandra Shah chandra.shah@nel.gov October 21, 2010 2 | FEDERAL ENERGY MANAGEMENT PROGRAM femp.energy.gov * PPA (15 minutes) - Resources - Discussion * URESC (15...

  3. PPA Tools and Update

    Broader source: Energy.gov [DOE]

    Presentation given at the Spring 2010 Federal Utility Partnership Working Group (FUPWG) meeting in Rapid City, South Dakota.

  4. Cycle Track Lessons Learned

    E-Print Network [OSTI]

    Bertini, Robert L.

    Cycle Track Lessons Learned #12;Presentation Overview · Bicycling trends · Cycle track lessons learned · What is a "Cycle track"? · Essential design elements of cycle tracks Separation Width Crossing

  5. Academy Member Annual Update Report 1Academy Member Update Report

    E-Print Network [OSTI]

    Academy Member Annual Update Report 1Academy Member Update Report The annual update report is an important activity associated with active membership in the Academy. These reports are due annually@lsuhsc.edu or call 504-568-2140 if you have other questions. Why an annual report? As an Academy member

  6. Program Review Updates and Briefings

    Broader source: Energy.gov [DOE]

    You can learn more about the U.S. Department of Energy (DOE) Geothermal Technologies Program by reading its program review updates and program briefings. These updates and briefings feature...

  7. Richmond Bay Campus: Project Update

    E-Print Network [OSTI]

    Lee, Jason R.

    Coordinate with City of Richmond South Shoreline Area planning #12;Richmond Bay Campus Vision A stateRichmond Bay Campus: Project Update Prepared for the Richmond City Council October 1, 2013 #12 and UCB · City of Richmond Updates · Summary · Questions & Answers #12;LBNL Project Update #12;University

  8. Information Updates: Position/Title

    E-Print Network [OSTI]

    Sheridan, Jennifer

    Information Updates: Name: Position/Title: Business Mailing Address: Home Mailing Address: Phone of nurse involvement and patient education. She is an active nurse leader that brings thoughtful discussion be a chapter update for upcoming future events and plans for the future. Don't miss this exciting update! Beta

  9. CAC Update: HFBR and BGRR

    E-Print Network [OSTI]

    Homes, Christopher C.

    rod blades and casks has been installed and tested #12;HFBR Update #12;HFBR Update Personnel have been on procedures for completing the work · Drills and dry-runs have been conducted to develop worker proficiency under normal and off-normal conditions #12;HFBR Update Transportation cask Certificates of Compliance

  10. Modeling the Nuclear Fuel Cycle

    SciTech Connect (OSTI)

    Jacob J. Jacobson; Mary Lou Dunzik-Gougar; Christopher A. Juchau

    2010-08-01T23:59:59.000Z

    A review of existing nuclear fuel cycle systems analysis codes was performed to determine if any existing codes meet technical and functional requirements defined for a U.S. national program supporting the global and domestic assessment, development and deployment of nuclear energy systems. The program would be implemented using an interconnected architecture of different codes ranging from the fuel cycle analysis code, which is the subject of the review, to fundamental physical and mechanistic codes. Four main functions are defined for the code: (1) the ability to characterize and deploy individual fuel cycle facilities and reactors in a simulation, while discretely tracking material movements, (2) the capability to perform an uncertainty analysis for each element of the fuel cycle and an aggregate uncertainty analysis, (3) the inclusion of an optimization engine able to optimize simultaneously across multiple objective functions, and (4) open and accessible code software and documentation to aid in collaboration between multiple entities and facilitate software updates. Existing codes, categorized as annualized or discrete fuel tracking codes, were assessed according to the four functions and associated requirements. These codes were developed by various government, education and industrial entities to fulfill particular needs. In some cases, decisions were made during code development to limit the level of detail included in a code to ease its use or to focus on certain aspects of a fuel cycle to address specific questions. The review revealed that while no two of the codes are identical, they all perform many of the same basic functions. No code was able to perform defined function 2 or several requirements of functions 1 and 3. Based on this review, it was concluded that the functions and requirements will be met only with development of a new code, referred to as GENIUS.

  11. WECC and Peak Update

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    WECC and Peak Update Transmission B O N N E V I L L E P O W E R A D M I N I S T R A T I O N Pre-decisional. For Discussion Purposes Only. WECC and Peak Background In the...

  12. RESEARCH UPDATE Ecology Division

    E-Print Network [OSTI]

    1 RESEARCH UPDATE Ecology Division Biotype has changed its name to Ecotype! Following the re-organisation of Forest Research into five science Divisions and three Support Divisions, the former Woodland Ecology Branches to form the new Ecology Division. We decided to give the divisional newsletter a new name (and

  13. Project X with Rapid Cycling and Dual Storage Superconducting

    SciTech Connect (OSTI)

    Piekarz, H.; /Fermilab

    2012-05-01T23:59:59.000Z

    Investigation of neutrino oscillations and rare meson decays are the main physics goals of Project X. The successful physics outcome relies on the feasibility of high-intensity neutrino and meson (K{sup +} and {mu}) beams. In order to meet this goal we propose a synchrotron-based accelerator system (Option A) as technologically easier and cost-effective alternative to the accelerator system dominated by the linear accelerators (Option B). The synchrotron-based accelerator system is outlined and the expected proton beam power for the neutrino and meson beams production is presented and discussed. Further conceptual and technical details of the synchrotron-based accelerator system for Project X are outlined.

  14. Rapid Cycling Synchrotron (RCS) sngle-stage kicker magnet

    SciTech Connect (OSTI)

    Suddeth, D.E.; Volk, G.J.

    1980-01-01T23:59:59.000Z

    A new single stage kicker magnet system is designed and is being fabricated for the RCS accelerator of the Intense Pulsed Neutron Source (IPNS-I) at the Argonne National Laboratory. This system will replace the two stage kicker in present use. The magnet aperture is 10 cm wide by 5 cm high and the magnetic length is 0.89 m. The magnetic field intensity is 0.1021 T for a 25 milliradian kick to the 500 MeV proton beam. A field rise time (10 to 90%) of 80 ns and a flattop of 100 ns is needed. The magnetic field fall time is not critical so a lumped parameter magnet with a 7.2 ohm load will be used. The electric current required through the single turn magnet is 4863 A. A new energy storage and switching system is designed and is being fabricated for energizing the magnets. The techniques and hardware used will be described along with some of the experience gained in the use of the two stage system which will help to improve the new design.

  15. NREL: Transportation Research - DRIVE: Drive-Cycle Rapid Investigation,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy: Grid IntegrationReportTransmission PlanningCapabilities A

  16. Updating time-to-failure distributions based on field observations and sensor data.

    SciTech Connect (OSTI)

    Lowder, Kelly S.; Briand, Daniel; Shirah, Donald

    2006-10-01T23:59:59.000Z

    Enterprise level logistics and prognostics and health management (PHM) modeling efforts use reliability focused failure distributions to characterize the probability of failure over the lifetime of a component. This research characterized the Sandia National Laboratories developed combined lifecycle (CMBL) distribution and explored methods for updating this distribution as systems age and new failure data becomes available. The initial results obtained in applying a Bayesian sequential updating methodology to the CMBL distribution shows promise. This research also resulted in the development of a closed-form full life cycle (CFLC) distribution similar to the CMBL distribution but with slightly different, yet commonly recognized, input parameters. Further research is warranted to provide additional theoretical validation of the distributions, complete the updating methods for the CMBL distribution, evaluate a Bayesian updating methodology for the CFLC distribution, and determine which updating methods would be most appropriate for enterprise level logistics and PHM modeling.

  17. The natural and industrial cycling of indium in the environment

    E-Print Network [OSTI]

    White, Sarah Jane O'Connell

    2012-01-01T23:59:59.000Z

    Indium is an important metal whose production is increasing dramatically due to new uses in the rapidly growing electronics, photovoltaic, and LED industries. Little is known, however, about the natural or industrial cycling ...

  18. Texas Electricity Update

    E-Print Network [OSTI]

    Lloyd, B.

    2012-01-01T23:59:59.000Z

    Texas Electricity Update CATEE 2012 Galveston, Texas Brian Lloyd Executive Director Public Utility Commission of Texas October 10, 2012 1 2 Drought Summary May Reserve Margin Report 3 Demand Growth by Region 4 105? Normal... 917 Firm Load Forecast, MW 65,649 68,403 71,692 73,957 75,360 76,483 CATEE 2012 Questions? Brian H. Lloyd Executive Director Public Utility Commission of Texas 512-936-7040 14 ...

  19. Life Cycle Cost Housing Need and Sustainability

    E-Print Network [OSTI]

    Life Cycle Cost Housing Need and Sustainability Abstract: Jordan is actually facing a rapid urban became difficult to sustain especially concerning the slum areas and the environmental pollution due which could contribute to increase the productivity and sustainability taking into consideration

  20. Electricity Monthly Update

    Gasoline and Diesel Fuel Update (EIA)

    types of generators. Gas-fired combined-cycle units tend to be more efficient than coal-fired steam units. The second tab shows coal and natural gas prices on an equivalent...

  1. Progress Update: TRU Waste Shipping

    ScienceCinema (OSTI)

    Cody, Tom

    2012-06-14T23:59:59.000Z

    A progress update at the Savannah River Site. A continued effort on shipping TRU waste to WIPP in Carlsbad, New Mexico.

  2. Agricultural and Resource Economics Update

    E-Print Network [OSTI]

    2012-01-01T23:59:59.000Z

    Consumer Choices of Genetically Modified Food. ” ARE UpdateConsumer Choices of Genetically Modified Food Amir HeimanConsumer Choices of Genetically Modified Food Amir Heiman

  3. Agricultural and Resource Economics Update

    E-Print Network [OSTI]

    Lee, Hyunok; Sumner, Daniel A.; Martin, Philip; Hochman, Gal; Rajagopal, Deepak; Zilberman, David

    2011-01-01T23:59:59.000Z

    Environmental Impact of Biofuels. ” ARE Update 15(2):9-11.and the Environmental Impact of Biofuels Gal Hochman, Deepakand the Environmental Impact of Biofuels Gal Hochman, Deepak

  4. Agricultural and Resource Economics Update

    E-Print Network [OSTI]

    2012-01-01T23:59:59.000Z

    Analysis for Evaluating Biofuels. ” ARE Update 11(3) (2008):the RFS conventional biofuels mandate is severely harmingThe first is growth in biofuels demand. Notably, corn

  5. 1 POSTGRADUATE SCHOLARSHIPS UPDATE -July -August 2014 Postgraduate Scholarships Update

    E-Print Network [OSTI]

    Frean, Marcus

    - August 2014 ADDRESSENQUIRIESAND YOURCOMPLETEDFORMTO: SCHOLARSHIPSMANAGER ScholarshipsOffice Victoria1 POSTGRADUATE SCHOLARSHIPS UPDATE - July - August 2014 Postgraduate Scholarships Update JulyUniversityofWellington POBox600 Wellington6140 NewZealand PHONE +64-4-4635113 EMAIL scholarships-office@vuw.ac.nz WEBSITE www.victoria

  6. Building America Residential Energy Efficiency Technical Update...

    Energy Savers [EERE]

    Residential Energy Efficiency Technical Update Meeting: August 2011 Building America Residential Energy Efficiency Technical Update Meeting: August 2011 On this page, you may link...

  7. Energy Storage Systems 2010 Update Conference Presentations ...

    Energy Savers [EERE]

    Systems 2010 Update Conference Presentations - Day 1, Session 1 Energy Storage Systems 2010 Update Conference Presentations - Day 1, Session 1 The U.S. DOE Energy Storage Systems...

  8. Generation IV International Forum Updates Technology Roadmap...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Updates Technology Roadmap and Builds Future Collaboration Generation IV International Forum Updates Technology Roadmap and Builds Future Collaboration December 31, 2013 - 12:14pm...

  9. Utility Energy Services Contracts: Enabling Documents Update...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Update Utility Energy Services Contracts: Enabling Documents Update Presentation covers the FUPWG Fall Meeting, held on November 28-29, 2007 in San Diego, California....

  10. Next Update: November 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site. IfProved(Million Barrels)21 4.65 2013 Next Update: November

  11. Next Update: November 2013

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site. IfProved(Million Barrels)21 4.65 2013 Next Update:

  12. Hopper Updates and Status

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) EnvironmentalGyroSolé(tm) HarmonicbetandEnergy 2010 A File Storage Updates and

  13. Carver Updates and Status

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisiting the TWPSuccess StoriesFebruary 26,ComputersTrinitytheOptimization Updates and

  14. Updates and Status

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening aTurbulence mayUndergraduateAbout Us Updates and Status Current

  15. Timeline and updates

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening a solidSynthesis ofwasSynchrotron RadiationTimeline and Updates

  16. Sellafield Decommissioning Programme - Update and Lessons Learned

    SciTech Connect (OSTI)

    Lutwyche, P. R.; Challinor, S. F.

    2003-02-24T23:59:59.000Z

    The Sellafield site in North West England has over 240 active facilities covering the full nuclear cycle from fuel manufacture through generation, reprocessing and waste treatment. The Sellafield decommissioning programme was formally initiated in the mid 1980s though several plants had been decommissioned prior to this primarily to create space for other plants. Since the initiation of the programme 7 plants have been completely decommissioned, significant progress has been made in a further 16 and a total of 56 major project phases have been completed. This programme update will explain the decommissioning arrangements and strategies and illustrate the progress made on a number of the plants including the Windscale Pile Chimneys, the first reprocessing plan and plutonium plants. These present a range of different challenges and requiring approaches from fully hands on to fully remote. Some of the key lessons learned will be highlighted.

  17. APPROVED MINORS Updated on April 4, 2013

    E-Print Network [OSTI]

    New Hampshire, University of

    APPROVED MINORS Updated on April 4, 2013 Note: Please go to Department webpages for updates. Page 1;APPROVED MINORS Updated on April 4, 2013 Note: Please go to Department webpages for updates. Page 2 COLLEGE Studies Cinema Studies Classics Communication Dance Education English European Cultural Studies Forensics

  18. Rapid road repair vehicle

    DOE Patents [OSTI]

    Mara, Leo M. (Livermore, CA)

    1999-01-01T23:59:59.000Z

    Disclosed are improvments to a rapid road repair vehicle comprising an improved cleaning device arrangement, two dispensing arrays for filling defects more rapidly and efficiently, an array of pre-heaters to heat the road way surface in order to help the repair material better bond to the repaired surface, a means for detecting, measuring, and computing the number, location and volume of each of the detected surface imperfection, and a computer means schema for controlling the operation of the plurality of vehicle subsystems. The improved vehicle is, therefore, better able to perform its intended function of filling surface imperfections while moving over those surfaces at near normal traffic speeds.

  19. U.S. LIFE CYCLE INVENTORY DATABASE Goals of the U.S. LCI Database Project

    E-Print Network [OSTI]

    U.S. LIFE CYCLE INVENTORY DATABASE ROADMAP rsed e #12;Goals of the U.S. LCI Database Project. Vision Statement The U.S. Life Cycle Inventory Database will be the recognized source of U.S.-based, quality, transparent life cycle inventory data and will become an integral part of the rapidly expanding

  20. IEAB Invasive Mussels Update September 2013 Invasive Mussels Update

    E-Print Network [OSTI]

    ....................................................... 16 8. Update on Mussel Control Agents Area MFWP Montana Fish Wildlife and Parks NASQAN National Stream Quality Accounting Network NGO Non, respectively, during 2012. A total of 109 mussel-infested boats were found during

  1. Edgeworth cycles revisited

    E-Print Network [OSTI]

    Doyle, Joseph J.

    Some gasoline markets exhibit remarkable price cycles, where price spikes are followed by a series of small price declines: a pattern consistent with a model of Edgeworth cycles described by Maskin and Tirole. We extend ...

  2. Light disappears rapidly (exponentially)

    E-Print Network [OSTI]

    Kudela, Raphael M.

    #12;#12;#12;#12;Light disappears rapidly (exponentially) with depth At the same time, the color of the light shifts #12;#12;#12;#12;· Euphotic zone ­ plentiful light ­ 0-100 m (about) · Dysphotic zone ­ very, very little light ­ 100-1000 m (about) · Aphotic zone ­ no light ­ below 1000 m #12;Sunlight in Water

  3. FUPWG Fall 2009 Washington Update | Department of Energy

    Office of Environmental Management (EM)

    FUPWG Fall 2009 Washington Update FUPWG Fall 2009 Washington Update Presentation covers the 2009 Federal Utility Partnership Working Group (FUPWG) Washington update to the Lighting...

  4. Sign Up For Email Updates

    Broader source: Energy.gov [DOE]

    Be the first to know of the latest developments from the Energy.gov team -- from videos to infographics to live Q&A’s -- by signing up for email updates.

  5. Gearbox Reliability Collaborative Update (Presentation)

    SciTech Connect (OSTI)

    Sheng, S.

    2013-10-01T23:59:59.000Z

    This presentation was given at the Sandia Reliability Workshop in August 2013 and provides information on current statistics, a status update, next steps, and other reliability research and development activities related to the Gearbox Reliability Collaborative.

  6. BPA Wind Integration Team Update

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    BPA Wind Integration Team Update Customer Supplied Generation Imbalance (CSGI) Pilot Transmission Services Customer Forum 29 July 28, 2010 B O N N E V I L L E P O W E R A D M I N...

  7. Agricultural and Resource Economics Update

    E-Print Network [OSTI]

    2012-01-01T23:59:59.000Z

    corn prices, but crude oil prices are also relatively highSmith. “What is the Price of Oil? ” ARE Update 11(5) (2008):ates with the prices of corn and crude oil. Until 2011 there

  8. UPDATING CONSTRAINT PRECONDITIONERS FOR KKT ...

    E-Print Network [OSTI]

    2015-03-23T23:59:59.000Z

    nevertheless, their computation may be very expensive for large-scale problems and resorting to ... updating procedure is expected to build a preconditioner which is less effective in terms of linear iterations than ..... We consider a low-rank up-.

  9. Progress Update: M Area Closure

    ScienceCinema (OSTI)

    Cody, Tom

    2012-06-14T23:59:59.000Z

    A progress update of the Recovery Act at work at the Savannah River Site. The celebration of the first area cleanup completion with the help of the Recovery Act.

  10. Ksplice: Automatic Rebootless Kernel Updates

    E-Print Network [OSTI]

    Kaashoek, M. Frans

    2009-01-01T23:59:59.000Z

    Ksplice allows system administrators to apply patches to their operating system kernels without rebooting. Unlike previous hot update systems, Ksplice operates at the object code layer, which allows Ksplice to transform ...

  11. Updating Technical Screens for PV Interconnection: Preprint

    SciTech Connect (OSTI)

    Coddington, M.; Ellis, A.; Lynn, K.; Razon, A.; Key, T.; Kroposki, B.; Mather, B.; Hill, R.; Nicole, K.; Smith, J.

    2012-08-01T23:59:59.000Z

    Solar photovoltaics (PV) is the dominant type of distributed generation (DG) technology interconnected to electric distribution systems in the United States, and deployment of PV systems continues to increase rapidly. Considering the rapid growth and widespread deployment of PV systems in United States electric distribution grids, it is important that interconnection procedures be as streamlined as possible to avoid unnecessary interconnection studies, costs, and delays. Because many PV interconnection applications involve high penetration scenarios, the process needs to allow for a sufficiently rigorous technical evaluation to identify and address possible system impacts. Existing interconnection procedures are designed to balance the need for efficiency and technical rigor for all DG. However, there is an implicit expectation that those procedures will be updated over time in order to remain relevant with respect to evolving standards, technology, and practical experience. Modifications to interconnection screens and procedures must focus on maintaining or improving safety and reliability, as well as accurately allocating costs and improving expediency of the interconnection process. This paper evaluates the origins and usefulness of the capacity penetration screen, offers potential short-term solutions which could effectively allow fast-track interconnection to many PV system applications, and considers longer-term solutions for increasing PV deployment levels in a safe and reliable manner while reducing or eliminating the emphasis on the penetration screen.

  12. Cycle to Cycle Manufacturing Process Control

    E-Print Network [OSTI]

    Hardt, David E.

    Most manufacturing processes produce parts that can only be correctly measured after the process cycle has been completed. Even if in-process measurement and control is possible, it is often too expensive or complex to ...

  13. Rapid road repair vehicle

    DOE Patents [OSTI]

    Mara, Leo M. (Livermore, CA)

    1998-01-01T23:59:59.000Z

    Disclosed is a rapid road repair vehicle capable of moving over a surface to be repaired at near normal posted traffic speeds to scan for and find an the high rate of speed, imperfections in the pavement surface, prepare the surface imperfection for repair by air pressure and vacuum cleaning, applying a correct amount of the correct patching material to effect the repair, smooth the resulting repaired surface, and catalog the location and quality of the repairs for maintenance records of the road surface. The rapid road repair vehicle can repair surface imperfections at lower cost, improved quality, at a higher rate of speed than was was heretofor possible, with significantly reduced exposure to safety and health hazards associated with this kind of road repair activities in the past.

  14. Rapid road repair vehicle

    DOE Patents [OSTI]

    Mara, L.M.

    1998-05-05T23:59:59.000Z

    Disclosed is a rapid road repair vehicle capable of moving over a surface to be repaired at near normal posted traffic speeds to scan for and find at the high rate of speed, imperfections in the pavement surface, prepare the surface imperfection for repair by air pressure and vacuum cleaning, applying a correct amount of the correct patching material to effect the repair, smooth the resulting repaired surface, and catalog the location and quality of the repairs for maintenance records of the road surface. The rapid road repair vehicle can repair surface imperfections at lower cost, improved quality, at a higher rate of speed than was not heretofor possible, with significantly reduced exposure to safety and health hazards associated with this kind of road repair activities in the past. 2 figs.

  15. Rapidly refuelable fuel cell

    DOE Patents [OSTI]

    Joy, R.W.

    1982-09-20T23:59:59.000Z

    A rapidly refuelable dual cell of an electrochemical type is described wherein a single anode cooperates with two cathodes and wherein the anode has a fixed position and the cathodes are urged toward opposite faces of the anodes at constant and uniform force. The associated cathodes are automatically retractable to permit the consumed anode remains to be removed from the housing and a new anode inserted between the two cathodes.

  16. Short Communication Construction and use of new cloning vectors for the rapid

    E-Print Network [OSTI]

    Rayment, Ivan

    F) protein of Shewanella oneidensis, two enzymes involved in the catabolism of propionate to pyruvate via the 2-methylcitric acid cycle. Ó 2008 Elsevier Inc. All rights reserved. Keywords: TEV protease-cleavable tags; Rapid protein purification; Propionate catabolism; 2-Methylcitric acid cycle enzymes; 2

  17. Development of Updated ABsorption SIMulation Software (ABSIM)

    SciTech Connect (OSTI)

    Yang, Zhiyao [Purdue University, West Lafayette, IN; Tang, Xin [Purdue University, West Lafayette, IN; Qu, Ming [Purdue University, West Lafayette, IN; Abdelaziz, Omar [ORNL; Gluesenkamp, Kyle R [ORNL

    2014-01-01T23:59:59.000Z

    ABsorption SIMulation, ABSIM, was developed for the simulation of absorption systems by The Oak Ridge National Laboratory during 1980s and 1990s. ABSIM provides a platform for users to investigate various cycle configurations and working fluids, to calculate their operating parameters, to predict their performance, and to compare them with each other on a uniform basis. ABSIM is indeed a very useful and accurate tool for researchers to investigate various absorption systems. However, it has not been well maintained: it is incompatible with recent operating systems; the interface needs improved user-friendliness, and the system needs better parameter setting and debugging tools to help achieve convergence. Therefore, it is highly needed to update and improve ABSIM. The paper presents recent efforts to improve ABSIM s compatibility with current operating systems, user interface, and analysis capabilities. The paper details the features and functions of the newly updated ABSIM software. The new ABSIM still uses the previously validated calculation engine of the old ABSIM. The new graphic user interfaces (GUI) were developed in Qt, which is an open source license GUI software based on C++. XML was used as the database for data storage in the new ABSIM. The new ABSIM has been designed to be easily learned and used. It has enhanced editing and construction functions, plus enhanced analysis features including parametric tables, plotting, property plots, and master panels for debugging. A single effect water/LiBr absorption system is used as a case study in this paper to illustrate the features, capabilities, and functions of the new ABSIM. This case study was actually an example system available in the old ABSIM. The new version of ABSIM will be continuously developed to include additional subroutines for the components in liquid desiccant systems. The new ABSIM will be available to public for free. The ultimate goal of the new ABSIM is to allow it to become a simulation platform for both absorption heat pump and liquid desiccant systems.

  18. NEMA Distribution Transformers, CCE Overview and Update presentation...

    Broader source: Energy.gov (indexed) [DOE]

    Distribution Transformers, CCE Overview and Update presentation, dated 05242011 NEMA Distribution Transformers, CCE Overview and Update presentation, dated 05242011 This...

  19. Stirling-cycle refrigerator

    SciTech Connect (OSTI)

    Nakamura, K.

    1985-06-11T23:59:59.000Z

    A Stirling-cycle refrigerator comprises a plurality of Stirling-cycle refrigerator units each having a displacer defining an expansion chamber, a piston defining a compression chamber, and a circuit including a heater and a cooler and interconnecting the expansion chamber and the compression chamber, and a heat exchanger shared by the circuits and disposed between the coolers and the heaters for effecting heat exchange between working gases in the circuits. The heat exchanger may comprise a countercurrent heat exchanger, and the Stirling-cycle refrigerator units are operated in cycles which are 180/sup 0/ out of phase with each other.

  20. Energy Storage Systems 2010 Update Conference Presentations ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 Energy Storage Systems 2010 Update Conference Presentations - Day 1, Session 4 The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update Conference at...

  1. Energy Storage Systems 2010 Update Conference Presentations ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 Energy Storage Systems 2010 Update Conference Presentations - Day 2, Session 3 The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update Conference at...

  2. Energy Storage Systems 2010 Update Conference Presentations ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2 Energy Storage Systems 2010 Update Conference Presentations - Day 3, Session 2 The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update Conference at...

  3. Energy Storage Systems 2010 Update Conference Presentations ...

    Office of Environmental Management (EM)

    1 Energy Storage Systems 2010 Update Conference Presentations - Day 3, Session 1 The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update Conference at...

  4. Energy Storage Systems 2010 Update Conference Presentations ...

    Office of Environmental Management (EM)

    2 Energy Storage Systems 2010 Update Conference Presentations - Day 2, Session 2 The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update Conference at...

  5. Energy Storage Systems 2010 Update Conference Presentations ...

    Broader source: Energy.gov (indexed) [DOE]

    chaired by NETL's Kim Nuhfer, are below. ESS 2010 Update Conference - Low Cost Energy Storage - Ted Wiley, Aquion.pdf Ess 2010 Update Conference - Solid State Li Metal Batteries...

  6. Energy Storage Systems 2010 Update Conference Presentations ...

    Office of Environmental Management (EM)

    2 Energy Storage Systems 2010 Update Conference Presentations - Day 1, Session 2 The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update Conference at...

  7. Energy Storage Systems 2010 Update Conference Presentations ...

    Office of Environmental Management (EM)

    3 Energy Storage Systems 2010 Update Conference Presentations - Day 3, Session 3 The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update Conference at...

  8. Energy Storage Systems 2010 Update Conference Presentations ...

    Broader source: Energy.gov (indexed) [DOE]

    chaired by DOE's Imre Gyuk, are below. ESS 2010 Update Conference - UltraBattery Grid Storage - John Wood, Ecoult.pdf ESS 2010 Update Conference - PV Plus Storage for Simultaneous...

  9. Energy Storage Systems 2010 Update Conference Presentations ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 Energy Storage Systems 2010 Update Conference Presentations - Day 1, Session 3 The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update Conference at...

  10. Catalog Update 2006 International Education Abroad 1

    E-Print Network [OSTI]

    Gering, Jon C.

    Catalog Update 2006 International Education Abroad 1 INTERNATIONAL EDUCATION ABROAD 2005-2007 CATALOG UPDATE Changes effective 2006-2007 New Courses CHN 310 China Summer Study Abroad Program 6-7 hours

  11. Baton Rouge Metropolitan Transportation Plan Update

    E-Print Network [OSTI]

    Capital Region Planning Commission

    (028) SUBMITTED TO: LOUISIANA DEPARTMENT OF TRANSPORTATION AND DEVELOPMENT SUBMITTED BY: IN ASSOCIATION WITH: & FINAL Metropolitan Transportation Plan Update Baton Rouge, LA... ............................189? X. APPENDIX .........................................................................................................................195? ? Metropolitan Transportation Plan Update...

  12. DSO216_Phase_II_Summary_Updates

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Summary of DSO 216 - Phase II Update Limiting Wind Output to Scheduled Value and Curtailing Schedules to Actual Wind Generation Updated: December 13, 2013 I. PURPOSE The purpose of...

  13. Update of the Used Fuel Disposition Campaign Implementation Plan

    SciTech Connect (OSTI)

    Jens Birkholzer; Robert MacKinnon; Kevin McMahon; Sylvia Saltzstein; Ken Sorenson; Peter Swift

    2014-09-01T23:59:59.000Z

    This Campaign Implementation Plan provides summary level detail describing how the Used Fuel Disposition Campaign (UFDC) supports achievement of the overarching mission and objectives of the Department of Energy Office of Nuclear Energy Fuel Cycle Technologies Program The implementation plan begins with the assumption of target dates that are set out in the January 2013 DOE Strategy for the Management and Disposal of Used Nuclear Fuel and High-Level Radioactive Waste (http://energy.gov/downloads/strategy-management-and-disposal-used-nuclear-fuel-and-high-level-radioactive-waste). These target dates and goals are summarized in section III. This implementation plan will be maintained as a living document and will be updated as needed in response to progress in the Used Fuel Disposition Campaign and the Fuel Cycle Technologies Program.

  14. Updated 17 March 2012 Curriculum Vitae

    E-Print Network [OSTI]

    Richardson, David

    and Bioeconomy, 2011 Member, AAAS Committee on Science, Engineering and Public Policy, 2011-2014 #12;Updated 17

  15. Updated Cost Analysis of Photobiological Hydrogen Production...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Analysis of Photobiological Hydrogen Production from Chlamydomonas reinhardtii Green Algae: Milestone Completion Report Updated Cost Analysis of Photobiological Hydrogen...

  16. Opportunity for feedback Opportunity for updates

    E-Print Network [OSTI]

    Opportunity for feedback Opportunity for updates Opportunity to find out all of the things I don) What do these all mean? Vision (1) Values (5-10) Strategic Priorities (5-7) Education, scholarship update Research Plan Pinnacles or not? Focus on impact Update every 3 yrs Capital Plan Existing

  17. ECONOMICS UPDATE Issue 1 Autumn 2014

    E-Print Network [OSTI]

    Levi, Ran

    ECONOMICS UPDATE Issue 1 Economics Update Autumn 2014 UNIVERSITY OF ABERDEEN ­ DEPARTMENT OF ECONOMICS IN THIS ISSUE Welcome to the first Economics update! In this twice-yearly publication, we. In the Research Assessment Exercise results of 2008, 100% of Economics research, was judged to be of international

  18. Catalog Update 2006 Math & Computer Science 1

    E-Print Network [OSTI]

    Gering, Jon C.

    Catalog Update 2006 Math & Computer Science 1 MATH AND COMPUTER SCIENCE DIVISION 2005-2007 CATALOG UPDATE Changes effective 2006-2007 Degree Update COMPUTER SCIENCE BACHELOR OF SCIENCE Semester Hours CS 100 Computer Science Seminar.........................1 CS 180 Foundations of Computer Science I

  19. Advanced thermochemical hydrogen cycles

    SciTech Connect (OSTI)

    Hollabaugh, C.M.; Bowman, M.G.

    1981-01-01T23:59:59.000Z

    The overall objective of this program is to contribute to the development of practical thermochemical cycles for the production of hydrogen from water. Specific goals are: investigate and evaluate the technical and economic viability of thermochemical cycles as an advanced technology for producing hydrogen from water; investigate and evaluate the engineering principles involved in interfacing individual thermochemical cycles with the different thermal energy sources (high temperature fission, solar, and fusion); and conduct a continuing research and development effort to evaluate the use of solid sulfates, oxides and other compounds as potentially advanced cycles and as alternates to H/sub 2/SO/sub 4/ based cycles. Basic thermochemistry studies have been completed for two different steps in the decomposition of bismuth sulfate. Two different bismuth sulfate cycles have been defined for different sulfuric acid strengths. The eventual best cycle will depend on energy required to form sulfuric acid at different concentrations. A solids decomposition facility has been constructed and practical studies of solid decompositions are being conducted. The facility includes a rotary kiln system and a dual-particle fluidized bed system. Evaluation of different types of cycles for coupling with different heat sources is continuing.

  20. Photovoltaics Life Cycle Analysis

    E-Print Network [OSTI]

    (air, water, solid) M, Q E PV array Photovoltaic modules Balance of System (BOS) (Inverters & Environmental Engineering Department Columbia University and National Photovoltaic (PV) EHS Research Center Brookhaven National Laboratory www.clca.columbia.edu www.pv.bnl.gov #12;2 The Life Cycle of PVThe Life Cycle

  1. Power Plant Cycling Costs

    SciTech Connect (OSTI)

    Kumar, N.; Besuner, P.; Lefton, S.; Agan, D.; Hilleman, D.

    2012-07-01T23:59:59.000Z

    This report provides a detailed review of the most up to date data available on power plant cycling costs. The primary objective of this report is to increase awareness of power plant cycling cost, the use of these costs in renewable integration studies and to stimulate debate between policymakers, system dispatchers, plant personnel and power utilities.

  2. Life Cycle Cost Estimate

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-28T23:59:59.000Z

    Life-cycle costs (LCCs) are all the anticipated costs associated with a project or program alternative throughout its life. This includes costs from pre-operations through operations or to the end of the alternative.This chapter discusses life cycle costs and the role they play in planning.

  3. Advanced Test Reactor Core Modeling Update Project Annual Report for Fiscal Year 2012

    SciTech Connect (OSTI)

    David W. Nigg, Principal Investigator; Kevin A. Steuhm, Project Manager

    2012-09-01T23:59:59.000Z

    Legacy computational reactor physics software tools and protocols currently used for support of Advanced Test Reactor (ATR) core fuel management and safety assurance, and to some extent, experiment management, are inconsistent with the state of modern nuclear engineering practice, and are difficult, if not impossible, to properly verify and validate (V&V) according to modern standards. Furthermore, the legacy staff knowledge required for application of these tools and protocols from the 1960s and 1970s is rapidly being lost due to staff turnover and retirements. In late 2009, the Idaho National Laboratory (INL) initiated a focused effort, the ATR Core Modeling Update Project, to address this situation through the introduction of modern high-fidelity computational software and protocols. This aggressive computational and experimental campaign will have a broad strategic impact on the operation of the ATR, both in terms of improved computational efficiency and accuracy for support of ongoing DOE programs as well as in terms of national and international recognition of the ATR National Scientific User Facility (NSUF). The ATR Core Modeling Update Project, targeted for full implementation in phase with the next anticipated ATR Core Internals Changeout (CIC) in the 2014-2015 time frame, began during the last quarter of Fiscal Year 2009, and has just completed its third full year. Key accomplishments so far have encompassed both computational as well as experimental work. A new suite of stochastic and deterministic transport theory based reactor physics codes and their supporting nuclear data libraries (HELIOS, KENO6/SCALE, NEWT/SCALE, ATTILA, and an extended implementation of MCNP5) has been installed at the INL under various licensing arrangements. Corresponding models of the ATR and ATRC are now operational with all five codes, demonstrating the basic feasibility of the new code packages for their intended purpose. Of particular importance, a set of as-run core depletion HELIOS calculations for all ATR cycles since August 2009, Cycle 145A through Cycle 151B, was successfully completed during 2012. This major effort supported a decision late in the year to proceed with the phased incorporation of the HELIOS methodology into the ATR Core Safety Analysis Package (CSAP) preparation process, in parallel with the established PDQ-based methodology, beginning late in Fiscal Year 2012. Acquisition of the advanced SERPENT (VTT-Finland) and MC21 (DOE-NR) Monte Carlo stochastic neutronics simulation codes was also initiated during the year and some initial applications of SERPENT to ATRC experiment analysis were demonstrated. These two new codes will offer significant additional capability, including the possibility of full-3D Monte Carlo fuel management support capabilities for the ATR at some point in the future. Finally, a capability for rigorous sensitivity analysis and uncertainty quantification based on the TSUNAMI system has been implemented and initial computational results have been obtained. This capability will have many applications as a tool for understanding the margins of uncertainty in the new models as well as for validation experiment design and interpretation.

  4. Progress Update: Stack Project Complete

    ScienceCinema (OSTI)

    Cody, Tom

    2012-06-14T23:59:59.000Z

    Progress update from the Savannah River Site. The 75 foot 293 F Stack, built for plutonium production, was cut down to size in order to prevent injury or release of toxic material if the structure were to collapse due to harsh weather.

  5. Export Control Overview and Update

    E-Print Network [OSTI]

    Wood, Marcelo A.

    Export Control Overview and Update Marci Copeland, Export Control Officer #12;US Export Laws #12 items including equipment, materials, software & technology is export restricted Licensing can impact research timeline Certain imports/exports may be detained or seized by Customs in the US or in other

  6. Project Fact Sheet Project Update

    E-Print Network [OSTI]

    Project Fact Sheet Project Update: Project Brief: The works cover the refurbishment of floors 4, 5, with `wet' labs for molecular biology, materials characterisation, cell culture and flow studies, and `dry operating theatre. The Bionanotechnology Centre is one of the projects funded from the UK Government's ÂŁ20

  7. Progress Update: Stack Project Complete

    SciTech Connect (OSTI)

    Cody, Tom

    2010-01-01T23:59:59.000Z

    Progress update from the Savannah River Site. The 75 foot 293 F Stack, built for plutonium production, was cut down to size in order to prevent injury or release of toxic material if the structure were to collapse due to harsh weather.

  8. Wind turbine reliability database update.

    SciTech Connect (OSTI)

    Peters, Valerie A.; Hill, Roger Ray; Stinebaugh, Jennifer A.; Veers, Paul S.

    2009-03-01T23:59:59.000Z

    This report documents the status of the Sandia National Laboratories' Wind Plant Reliability Database. Included in this report are updates on the form and contents of the Database, which stems from a fivestep process of data partnerships, data definition and transfer, data formatting and normalization, analysis, and reporting. Selected observations are also reported.

  9. Project Fact Sheet Project Update

    E-Print Network [OSTI]

    & Figures: Budget: Ł51,074,000 Funding Source: Capital Plan Construction Project Programme: Start on SiteProject Fact Sheet Project Update: Project Brief: The concept of the new scheme is to redevelop Gardens project http://www.imperial.ac.uk/princesgardens/ Construction Project Team: Project Facts

  10. Washington Update March 14, 2011

    E-Print Network [OSTI]

    Washington Update March 14, 2011 Nominations for the National Climate Assessment Development a very wide range of expertise is required on the NCADAC.Nominees are sought who have · sectoral expertise, including the natural environment, agriculture and forestry, energy, land cover and land use

  11. EPA Update: NESHAP Uranium Activities

    E-Print Network [OSTI]

    EPA Update: NESHAP Uranium Activities Reid J. Rosnick Environmental Protection Agency Radiation Protection Division (6608J) Washington, DC 20460 NMA/NRC Uranium Recovery Workshop July 2, 2009 #12 for underground uranium mining operations (Subpart B) EPA regulatory requirements for operating uranium mill

  12. System strategies in the management of transit systems towards the end of their life cycle

    E-Print Network [OSTI]

    Kairon, Ajmer Singh

    2007-01-01T23:59:59.000Z

    This thesis explores and evaluates essential strategies needed for the transit authority/operator to deal with end of life cycle challenges of Rapid Transit Systems (RTS) systems. RTS systems are elaborate systems consisting ...

  13. The Anderson Quin Cycle

    SciTech Connect (OSTI)

    Anderson, J.H.; Bilbow, W.M.

    1993-03-18T23:59:59.000Z

    The objective of this study was to make a more refined evaluation of the Anderson Quin Cycle based on most recent information on the performance of various elements that will be used in the Anderson Quin Cycle. My original estimate of the work plan for evaluating and optimizing the Anderson Quin Cycle called for 7000 man hours of work. Since this grant was limited to 2150 man hours, we could not expect to achieve all the objectives within the allotted period of work. However, the most relevant program objectives have been completed as reported here. The analysis generally confirms the results originally estimated in my paper on the subject. (Ref. 2) Further optimizations should show even higher efficiencies. The Anderson Quin Cycle (US Patent applied for) basically consists of 5 elements in the power cycle: A refrigeration system to cool and clean the inlet air before it enters the compressor that supplies air for the gas turbine; a gas turbine consisting of a compressor, combustor, and turbine; a steam boiler and steam turbine system using the heat from the exhaust gas out of the gas turbine; a vapor turbine cycle, which utilizes the condensed heat from the exhaust of the steam turbine and the exhaust gas heat leaving the steam boiler to operate a vapor turbine cycle which utilizes another fluid than water, in this case isobutane; and the fifth element consists of a gas cooler and heat pump system, which removes the heat from the exhaust gas to lower its temperature essentially to atmospheric temperature, and at the same time permits treatment of the exhaust gas to remove acid components such as sulfur dioxide and nitrogen oxides. Current industry accepted component characteristics were incorporated in the performance analysis of the overall cycle, ensuring accurate and meaningful operating predictions. The characteristics and performance of each of the elements are described. The thermal efficiency of the optimized calculated Anderson Quin Cycle is 62 percent.

  14. Agricultural and Resource Economics Update

    E-Print Network [OSTI]

    2012-01-01T23:59:59.000Z

    provided by intermittent renewable electricity generation.driving rapid growth in renewable electricity generation.by the belief that renewable electricity will reduce

  15. Cycle isolation monitoring

    SciTech Connect (OSTI)

    Svensen, L.M. III; Zeigler, J.R.; Todd, F.D.; Alder, G.C. [Santee Copper, Moncks Corner, SC (United States)

    2009-07-15T23:59:59.000Z

    There are many factors to monitor in power plants, but one that is frequently overlooked is cycle isolation. Often this is an area where plant personnel can find 'low hanging fruit' with great return on investment, especially high energy valve leakage. This type of leakage leads to increased heat rate, potential valve damage and lost generation. The fundamental question to ask is 'What is 100 Btu/kW-hr of heat rate worth to your plant? On a 600 MW coal-fired power plant, a 1% leakage can lead to an 81 Btu/kW-hr impact on the main steam cycle and a 64 Btu/kW-hr impact on the hot reheat cycle. The article gives advice on methods to assist in detecting leaking valves and to monitor cycle isolation. A software product, TP. Plus-CIM was designed to estimate flow rates of potentially leaking valves.

  16. IFR fuel cycle

    SciTech Connect (OSTI)

    Battles, J.E.; Miller, W.E. (Argonne National Lab., IL (United States)); Lineberry, M.J.; Phipps, R.D. (Argonne National Lab., Idaho Falls, ID (United States))

    1992-01-01T23:59:59.000Z

    The next major milestone of the IFR program is engineering-scale demonstration of the pyroprocess fuel cycle. The EBR-II Fuel Cycle Facility has just entered a startup phase, which includes completion of facility modifications and installation and cold checkout of process equipment. This paper reviews the development of the electrorefining pyroprocess, the design and construction of the facility for the hot demonstration, the design and fabrication of the equipment, and the schedule and initial plan for its operation.

  17. IFR fuel cycle

    SciTech Connect (OSTI)

    Battles, J.E.; Miller, W.E. [Argonne National Lab., IL (United States); Lineberry, M.J.; Phipps, R.D. [Argonne National Lab., Idaho Falls, ID (United States)

    1992-04-01T23:59:59.000Z

    The next major milestone of the IFR program is engineering-scale demonstration of the pyroprocess fuel cycle. The EBR-II Fuel Cycle Facility has just entered a startup phase, which includes completion of facility modifications and installation and cold checkout of process equipment. This paper reviews the development of the electrorefining pyroprocess, the design and construction of the facility for the hot demonstration, the design and fabrication of the equipment, and the schedule and initial plan for its operation.

  18. Soil metagenomics and carbon cycling

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and carbon cycling Establishing a foundational understanding of the microbial and ecosystem factors that control carbon cycling to improve climate modeling and carbon...

  19. Rapid prototyping: A paradigm shift in investment casting

    SciTech Connect (OSTI)

    Atwood, C.L.; Maguire, M.C.; Baldwin, M.D.; Pardo, B.T.

    1996-09-01T23:59:59.000Z

    The quest for fabricating complex metal parts rapidly and with minimal cost has brought rapid prototyping (RP) processes to the forefront of the investment casting industry. Relatively recent advances in DTM Corporation`s selective laser sintering (SLS) and 3D Systems stereolithography (SL) processes have had a significant impact on the overall quality of patterns produced using these rapid prototyping processes. Sandia National Laboratories uses patterns generated from rapid prototyping processes to reduce the cycle time and cost of fabricating prototype and small lot production parts in support of a program called FASTCAST. The SLS process is used to fabricate patterns from materials such as investment casting wax, polycarbonate, and a new material called TrueForm PM{trademark}. With the timely introduction of each of these materials, the quality of patterns fabricated has improved. The development and implementation of SL QuickCast{trademark} software has enabled this process to produce highly accurate patterns for use in investment casting. This paper focuses on the successes with these new pattern materials and the infrastructure required to cast rapid prototyping patterns successfully. In addition, a brief overview of other applications of rapid prototyping at Sandia will be discussed.

  20. DRIVE Analysis Tool Generates Custom Vehicle Drive Cycles Based on Real-World Data (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-04-01T23:59:59.000Z

    This fact sheet from the National Renewable Energy Laboratory describes the Drive-Cycle Rapid Investigation, Visualization, and Evaluation (DRIVE) analysis tool, which uses GPS and controller area network data to characterize vehicle operation and produce custom vehicle drive cycles, analyzing thousands of hours of data in a matter of minutes.

  1. Updated Axion CDM energy density

    E-Print Network [OSTI]

    Ji-Haeng Huh

    2008-10-08T23:59:59.000Z

    We update cosmological bound on axion model. The contribution from the anharmonic effect and the newly introduced initial overshoot correction are considered. We present an explicit formula for the axion relic density in terms of the QCD scale Lambda_{QCD}, the current quark masses m_q's and the Peccei-Quinn scale F_a, including firstly introduced 1.85 factor which is from the initial overshoot.

  2. GHG Update/CAP Progress ReportGHG Update/CAP Progress Report 2010 GHG Update2010 GHG Update

    E-Print Network [OSTI]

    Zhou, Pei

    i i f t d d 486­ Duke Energy emission factors decreased .486 kgCO2/kWh to .405 kgCO2/kWh · Steam Percentages 15% 1% (~328,000 MTeCO2) 13% 1% (~307,000 MTeCO2) 44% 10% 15% 49%1% 11% 44% 1% 1% 28% Electricity Update 450000 500000 250000 300000 350000 400000 CO2 100000 150000 200000 250000 MTeC 0 50000 1990 1991

  3. Helium process cycle

    DOE Patents [OSTI]

    Ganni, Venkatarao (Yorktown, VA)

    2008-08-12T23:59:59.000Z

    A unique process cycle and apparatus design separates the consumer (cryogenic) load return flow from most of the recycle return flow of a refrigerator and/or liquefier process cycle. The refrigerator and/or liquefier process recycle return flow is recompressed by a multi-stage compressor set and the consumer load return flow is recompressed by an independent consumer load compressor set that maintains a desirable constant suction pressure using a consumer load bypass control valve and the consumer load return pressure control valve that controls the consumer load compressor's suction pressure. The discharge pressure of this consumer load compressor is thereby allowed to float at the intermediate pressure in between the first and second stage recycle compressor sets. Utilizing the unique gas management valve regulation, the unique process cycle and apparatus design in which the consumer load return flow is separate from the recycle return flow, the pressure ratios of each recycle compressor stage and all main pressures associated with the recycle return flow are allowed to vary naturally, thus providing a naturally regulated and balanced floating pressure process cycle that maintains optimal efficiency at design and off-design process cycle capacity and conditions automatically.

  4. Helium process cycle

    DOE Patents [OSTI]

    Ganni, Venkatarao (Yorktown, VA)

    2007-10-09T23:59:59.000Z

    A unique process cycle and apparatus design separates the consumer (cryogenic) load return flow from most of the recycle return flow of a refrigerator and/or liquefier process cycle. The refrigerator and/or liquefier process recycle return flow is recompressed by a multi-stage compressor set and the consumer load return flow is recompressed by an independent consumer load compressor set that maintains a desirable constant suction pressure using a consumer load bypass control valve and the consumer load return pressure control valve that controls the consumer load compressor's suction pressure. The discharge pressure of this consumer load compressor is thereby allowed to float at the intermediate pressure in between the first and second stage recycle compressor sets. Utilizing the unique gas management valve regulation, the unique process cycle and apparatus design in which the consumer load return flow is separate from the recycle return flow, the pressure ratios of each recycle compressor stage and all main pressures associated with the recycle return flow are allowed to vary naturally, thus providing a naturally regulated and balanced floating pressure process cycle that maintains optimal efficiency at design and off-design process cycle capacity and conditions automatically.

  5. Superfluid thermodynamic cycle refrigerator

    DOE Patents [OSTI]

    Swift, G.W.; Kotsubo, V.Y.

    1992-12-22T23:59:59.000Z

    A cryogenic refrigerator cools a heat source by cyclically concentrating and diluting the amount of [sup 3]He in a single phase [sup 3]He-[sup 4]He solution. The [sup 3]He in superfluid [sup 4]He acts in a manner of an ideal gas in a vacuum. Thus, refrigeration is obtained using any conventional thermal cycle, but preferably a Stirling or Carnot cycle. A single phase solution of liquid [sup 3]He at an initial concentration in superfluid [sup 4]He is contained in a first variable volume connected to a second variable volume through a superleak device that enables free passage of [sup 4]He while restricting passage of [sup 3]He. The [sup 3]He is compressed (concentrated) and expanded (diluted) in a phased manner to carry out the selected thermal cycle to remove heat from the heat load for cooling below 1 K. 12 figs.

  6. Superfluid thermodynamic cycle refrigerator

    DOE Patents [OSTI]

    Swift, Gregory W. (Santa Fe, NM); Kotsubo, Vincent Y. (La Canada, CA)

    1992-01-01T23:59:59.000Z

    A cryogenic refrigerator cools a heat source by cyclically concentrating and diluting the amount of .sup.3 He in a single phase .sup.3 He-.sup.4 He solution. The .sup.3 He in superfluid .sup.4 He acts in a manner of an ideal gas in a vacuum. Thus, refrigeration is obtained using any conventional thermal cycle, but preferably a Stirling or Carnot cycle. A single phase solution of liquid .sup.3 He at an initial concentration in superfluid .sup.4 He is contained in a first variable volume connected to a second variable volume through a superleak device that enables free passage of .sup.4 He while restricting passage of .sup.3 He. The .sup.3 He is compressed (concentrated) and expanded (diluted) in a phased manner to carry out the selected thermal cycle to remove heat from the heat load for cooling below 1 K.

  7. Canadian Fuel Cell Commercialization Roadmap Update: Progress...

    Open Energy Info (EERE)

    Commercialization Roadmap Update: Progress of Canada's Hydrogen and Fuel Cell Industry Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Canadian Fuel Cell...

  8. Energy Storage Systems 2010 Update Conference Presentations ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    : Poster Session Energy Storage Systems 2010 Update Conference Presentations - Day 3: Poster Session The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking...

  9. Recovery Act Progress Update: Reactor Closure Feature

    SciTech Connect (OSTI)

    Cody, Tom

    2010-01-01T23:59:59.000Z

    A Recovery Act Progress Update. Decommissioning of two nuclear reactor sites at the Department of Energy's facilities has been approved and is underway.

  10. Progress Update: P-Reactor Grout

    SciTech Connect (OSTI)

    Cody, Tom

    2010-01-01T23:59:59.000Z

    A progress update, the Recovery Act at work at the Savannah River Site. The new phase of work on the permanent closure of two cold war nuclear reactors.

  11. Municipal Consortium Releases Updated Model Specification for...

    Broader source: Energy.gov (indexed) [DOE]

    Network section, with associated requirements. Separation of the Start-Up and Commissioning sections, with updated or enhanced requirements for both. Further refinement...

  12. June 2014 Update | ornl.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    inaugural issue of Building Technologies Update highlights a breakthrough in home refrigeration research, the new UT-ORNL Governor's Chair for High Performance Energy Practices...

  13. Refrigerant Compliance Updated: July 12, 2012

    E-Print Network [OSTI]

    Holland, Jeffrey

    Refrigerant Compliance Policy Updated: July 12, 2012 #12;TABLE OF CONTENTS The official version ........................................................................................................ 3 A. Refrigerant Compliance Manager (RCM).................................................................. 3 B. Refrigerant Inventory Coordinator (RIC

  14. Recovery Act Progress Update: Reactor Closure Feature

    ScienceCinema (OSTI)

    Cody, Tom

    2012-06-14T23:59:59.000Z

    A Recovery Act Progress Update. Decommissioning of two nuclear reactor sites at the Department of Energy's facilities has been approved and is underway.

  15. Progress Update: P-Reactor Grout

    ScienceCinema (OSTI)

    Cody, Tom

    2012-06-14T23:59:59.000Z

    A progress update, the Recovery Act at work at the Savannah River Site. The new phase of work on the permanent closure of two cold war nuclear reactors.

  16. Updating Interconnection Screens for PV System Integration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Abraham Ellis, Roger Hill Sandia National Laboratories Tom Key, Kristen Nicole, Jeff Smith Electric Power Research Institute Updating Interconnection Screens for PV System...

  17. BPAT Systems Update - October 10, 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CommitteesTeams Customer Training Interconnection Notices Rates Standards of Conduct Tariff TF Web Based Training Notice: BPAT Systems Update Posted Date: 10102014 On Thursday,...

  18. International Data on Educational Attainment: Updates and Implications

    E-Print Network [OSTI]

    International Data on Educational Attainment: Updates and Implications Robert J. Barro and Jong Papers #12;International Data on Educational Attainment: Updates and Implications Robert J. Barro Development at Harvard University. #12;1 International Data on Educational Attainment: Updates

  19. Rapid prototyping of green composites

    E-Print Network [OSTI]

    Peek, Nadya (Nadya Meile)

    2010-01-01T23:59:59.000Z

    Rapid prototyping employs digital fabrication techniques to quickly manufacture parts. However, the available materials are not yet suitable for making strong, large or durable objects. Composites are materials which are ...

  20. Ecosystem element cycling Introduction

    E-Print Network [OSTI]

    Ickert-Bond, Steffi

    Ecosystem element cycling Introduction An ecosystem consists of all the biological organisms and the physical environments they occupy together within a defined area [1]. The actual boundaries of an ecosystem are generally defined by researchers studying the ecosystem, who are usually interested in understanding

  1. GENERAL CIRCULATION Energy Cycle

    E-Print Network [OSTI]

    Grotjahn, Richard

    process. PE is useful for global energy balance. Solar radiant energy does not reach the Earth equally everywhere. On average, the tropics receive and absorb far more solar energy annually than the polar regionsGENERAL CIRCULATION Contents Energy Cycle Mean Characteristics Momentum Budget Overview Energy

  2. Life cycle assessment

    SciTech Connect (OSTI)

    Curran, M.A. [Environmental Protection Agency, Cincinnati, OH (United States)

    1994-12-31T23:59:59.000Z

    Life-Cycle Assessment (LCA) is a technical, data-based and holistic approach to define and subsequently reduce the environmental burdens associated with a product, process, or activity by identifying and quantifying energy and material usage and waste discharges, assessing the impact of those wastes on the environment, and evaluating and implementing opportunities to effect environmental improvements. The assessment includes the entire life-cycle of the product, process or activity encompassing extraction and processing of raw materials, manufacturing, transportation and distribution, use/reuse, recycling and final disposal. LCA is a useful tool for evaluating the environmental consequences of a product, process, or activity, however, current applications of LCA have not been performed in consistent or easily understood ways. This inconsistency has caused increased criticism of LCA. The EPA recognized the need to develop an LCA framework which could be used to provide consistent use across the board. Also, additional research is needed to enhance the understanding about the steps in the performance of an LCA and its appropriate usage. This paper will present the research activities of the EPA leading toward the development of an acceptable method for conducting LCA`s. This research has resulted in the development of two guidance manuals. The first manual is intended to be a practical guide to conducting and interpreting the life-cycle inventory. A nine-step approach to performing a comprehensive inventory is presented along with the general issues to be addressed. The second manual addresses life-cycle design.

  3. Combined Cycle Combustion Turbines

    E-Print Network [OSTI]

    Combined Cycle Combustion Turbines Steven Simmons February 27 2014 1 #12;CCCT Today's Discussion 1 Meeting Pricing of 4 advanced units using information from Gas Turbine World Other cost estimates from E E3 EIA Gas Turbine World California Energy Commission Date 2010 Oct 2012, Dec 2013 Apr 2013 2013 Apr

  4. Pepco Update on Current Construction Work and Mirant Generation...

    Energy Savers [EERE]

    Update on Current Construction Work and Mirant Generation Needs for Pepco's Planned June Line Outage Pepco Update on Current Construction Work and Mirant Generation Needs for...

  5. Home Energy Score Update: New Simulation Training and Credential...

    Energy Savers [EERE]

    Update: New Simulation Training and Credential Requirements for Assessors Home Energy Score Update: New Simulation Training and Credential Requirements for Assessors Home Energy...

  6. Defense Nuclear Facilities Safety Board (DNFSB) Update - Dale...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Defense Nuclear Facilities Safety Board (DNFSB) Update - Dale Govan, Departmental Representative to the DNFSB Defense Nuclear Facilities Safety Board (DNFSB) Update - Dale Govan,...

  7. Updated: September 9, 2013 Queen's University Faculty of Education

    E-Print Network [OSTI]

    Abolmaesumi, Purang

    Updated: September 9, 2013 Queen's University Faculty of Education Aboriginal Teacher Education of Practicum Review Process section has been completed. #12;Updated: September 9, 2013 Outcomes

  8. Update 3 to: A Dispersion Modeling Analysis of Downwash from...

    Broader source: Energy.gov (indexed) [DOE]

    Update 2 to: A Dispersion Modeling Analysis of Downwash from Mirant's Potomac River Power Plant, Modeling Units 1 and 4 Together More Documents & Publications Update 1 to: A...

  9. Home Energy Score Update: New Simulation Training & Credential...

    Energy Savers [EERE]

    Home Energy Score Update: New Simulation Training & Credential Requirements for Assessors Home Energy Score Update: New Simulation Training & Credential Requirements for Assessors...

  10. NEMA Lighting, CCE Overview and Update presentation, dated 05...

    Broader source: Energy.gov (indexed) [DOE]

    Equipment-- AHRI Annual Meeting CCE Overview and Update Presenation, dated April 13, 2011 NEMA Distribution Transformers, CCE Overview and Update presentation, dated 05242011...

  11. Appliance Standards Program Schedule - CCE Overview and Update...

    Broader source: Energy.gov (indexed) [DOE]

    Meeting CCE Overview and Update Presenation, dated April 13, 2011 NEMA Distribution Transformers, CCE Overview and Update presentation, dated 05242011 Appliance Standards Program...

  12. CEA ? External Power Supplies, CCE Overview and Update presentation...

    Broader source: Energy.gov (indexed) [DOE]

    & Publications AHAM - CCE Overview and Update, dated 06072011 NEMA Distribution Transformers, CCE Overview and Update presentation, dated 05242011 NEMA Lighting, CCE Overview...

  13. OE Updates Organizational Structure to Operate More Strategically...

    Office of Environmental Management (EM)

    Updates Organizational Structure to Operate More Strategically and Efficiently OE Updates Organizational Structure to Operate More Strategically and Efficiently January 28, 2013 -...

  14. 2011 Residential Energy Efficiency Technical Update Meeting Summary...

    Energy Savers [EERE]

    2011 Residential Energy Efficiency Technical Update Meeting Summary Report: Denver, Colorado - August 9-11, 2011 2011 Residential Energy Efficiency Technical Update Meeting Summary...

  15. BETTER BUILDINGS CHALLENGE PROGRESS UPDATE, MAY 2014 | Department...

    Broader source: Energy.gov (indexed) [DOE]

    progress-update-may2014.pdf More Documents & Publications Better Buildings Challenge Progress Update, May 2013 Better Buildings Progress Report 2012 Better Buildings Alliance for...

  16. Hydrogen and Fuel Cell Technologies Update: 2010 Fuel Cell Seminar...

    Energy Savers [EERE]

    Update: 2010 Fuel Cell Seminar and Exposition Hydrogen and Fuel Cell Technologies Update: 2010 Fuel Cell Seminar and Exposition Presentation by Sunita Satyapal at the 2010 Fuel...

  17. Hydrogen and Fuel Cell Technologies Update: 2010 Fuel Cell Seminar...

    Broader source: Energy.gov (indexed) [DOE]

    Hydrogen and Fuel Cell Technologies Update: 2010 Fuel Cell Seminar and Exposition Hydrogen and Fuel Cell Technologies Update: 2010 Fuel Cell Seminar and Exposition Presentation by...

  18. Program Updates | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China 2015of 2005UNS Electric,RM Exit Procedures.docThe Program Update2014 LM1Inside this

  19. Update on Franklin retirement plans

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron SpinPrinceton PlasmaAfternoon TalksDigitalRevision toNetwork -Update on

  20. Momentum Savings Market Research Update

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHighandSWPA / SPRA /Ml'.Solar Thermal Solar Thermal IndustrialandUpdate

  1. Waste Isolation Pilot Plant Update

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently20,000 Russian Nuclear Warheads|of Energy Washington SuccessWhenWasteWIPPWasteUpdate

  2. BELIEF REVISION AND UPDATE a dissertation

    E-Print Network [OSTI]

    del Val, Alvaro

    computational problems (chapters 5 and 6). A review of some of the most important proposals on revisionBELIEF REVISION AND UPDATE a dissertation submitted to the department of philosophy. In this study we focus on two of them, revision and update. For each of them, we attempt to ground them

  3. Graduate School of Education Assessment Update

    E-Print Network [OSTI]

    Graduate School of Education Assessment Update 2009 State of the School September 23, 2009 #12 communities' lifelong educational needs We updated our conceptual framework: #12;Graduate School of Education;Graduate School of Education Countdown to Accreditation Visit 38 days to go October 31­November 4 #12

  4. Staying Current: Changes & Updates September 4, 2013

    E-Print Network [OSTI]

    Kay, Mark A.

    Self-Inspection Expectations · SC County Hazardous Waste Updates and Expectations · EHS Updates deficiencies üSeparate form for areas requiring a monthly inspection http://www.stanford Hazardous Materials Compliance Division(HMCD) 1555 Berger Drive, Suite 300, San Jose, CA 95112-2716 Phone

  5. Green Sturgeon (Acipenser medirostris) Status Review Update

    E-Print Network [OSTI]

    Green Sturgeon (Acipenser medirostris) Status Review Update Biological Review Team Santa Cruz Status of Green Sturgeon 1 3. Key Questions in ESA Determination 3 a. The "Species" Question 3 b. The Extinction Risk Question 4 c. "A significant portion of the species' range" issue 4 Recently Updated Green

  6. Data Update for Paxton, MA December, 2006

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Paxton, MA December, 2006 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for December, 2006 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per

  7. Data Update for Paxton, MA November, 2006

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Paxton, MA November, 2006 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for November, 2006 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per

  8. Data Update for Paxton, MA February, 2005

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Paxton, MA February, 2005 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for February, 2005 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per

  9. Data Update for Paxton, MA January, 2006

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Paxton, MA January, 2006 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for January, 2006 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per

  10. Data Update for Paxton, MA Prepared for

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Paxton, MA May, 2006 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for May, 2006 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per the WSG84

  11. Data Update for Paxton, MA September, 2006

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Paxton, MA September, 2006 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for September, 2006 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per

  12. Data Update for Paxton, MA October, 2004

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Paxton, MA October, 2004 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for October, 2004 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per

  13. Data Update for Paxton, MA Prepared for

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Paxton, MA June, 2006 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for June, 2006 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per the WSG84

  14. Data Update for Paxton, MA April, 2005

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Paxton, MA April, 2005 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for April, 2005 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per the WSG84

  15. Data Update for Paxton, MA October, 2005

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Paxton, MA October, 2005 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for October, 2005 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per

  16. Data Update for Paxton, MA August, 2005

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Paxton, MA August, 2005 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for August, 2005 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per

  17. Data Update for Paxton, MA September, 2005

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Paxton, MA September, 2005 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for September, 2005 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per

  18. Data Update for Paxton, MA April, 2006

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Paxton, MA April, 2006 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for April, 2006 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per the WSG84

  19. Data Update for Paxton, MA October, 2006

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Paxton, MA October, 2006 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for October, 2006 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per

  20. Data Update for Paxton, MA Prepared for

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Paxton, MA May, 2005 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for May, 2005 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per the WSG84

  1. Data Update for Paxton, MA November, 2004

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Paxton, MA November, 2004 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for November, 2004 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per

  2. Data Update for Paxton, MA February, 2006

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Paxton, MA February, 2006 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for February, 2006 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per

  3. Data Update for Blandford, MA October 2006

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Blandford, MA October 2006 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Matthew Lackner Monthly Data Summary for October 2006 This update summarizes the monthly data results for the Blandford monitoring site in Blandford, MA, at 42.223° N, 72

  4. Data Update for Paxton, MA March, 2006

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Paxton, MA March, 2006 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for March, 2006 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per the WSG84

  5. Data Update for Paxton, MA August, 2006

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Paxton, MA August, 2006 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for August, 2006 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per

  6. Data Update for Paxton, MA December, 2005

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Paxton, MA December, 2005 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for December, 2005 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per

  7. Data Update for Paxton, MA March, 2005

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Paxton, MA March, 2005 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for March, 2005 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per the WSG84

  8. Data Update for Blandford, MA November 2006

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Blandford, MA November 2006 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Matthew Lackner Monthly Data Summary for November 2006 This update summarizes the monthly data results for the Blandford monitoring site in Blandford, MA, at 42.223° N, 72

  9. Data Update for Paxton, MA Prepared for

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Paxton, MA July, 2005 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for July, 2005 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per the WSG84

  10. Data Update for Paxton, MA Prepared for

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Paxton, MA June, 2005 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for June, 2005 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per the WSG84

  11. Data Update for Paxton, MA September, 2004

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Paxton, MA September, 2004 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for September, 2004 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per

  12. Data Update for Paxton, MA Prepared for

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Paxton, MA July, 2006 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for July, 2006 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per the WSG84

  13. Data Update for Paxton, MA January, 2005

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Paxton, MA January, 2005 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for January, 2005 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per

  14. Data Update for Paxton, MA November, 2005

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Paxton, MA November, 2005 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for November, 2005 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per

  15. Data Update for Paxton, MA December, 2004

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Paxton, MA December, 2004 Prepared for Massachusetts Technology Collaborative, 75 North Drive, Westborough, MA 01581 By Kai Wu Monthly Data Summary for December, 2004 This update summarizes the monthly data results for the Paxton MA monitoring site at 42-18-11.6 N, 71-53-50.9 W per

  16. Office Lighting: Title 24 & Technology Update

    E-Print Network [OSTI]

    California at Davis, University of

    /20/2014 BACKGROUND AND POLICYSLIDE 6 California Energy Consumption Database, http://ecdms.energy.ca.gov, updatedOffice Lighting: Title 24 & Technology Update Kelly Cunningham Outreach Director kcunning@ucdavis.edu California Lighting Technology Center, UC Davis RESEARCH . INNOVATION . PARTNERSHIP Supporting compliance

  17. Updated 7-11 Elliott B. Branch

    E-Print Network [OSTI]

    Corporation, and the Departments of Defense, Energy, Justice and State. #12;Updated 7-11 Prior to that, heUpdated 7-11 Elliott B. Branch Deputy Assistant Secretary of the Navy (Acquisition and Procurement activity in approximately 75 agencies. Mr. Branch spent time in the private sector, where he specialized

  18. Retail Lighting: Title 24 & Technology Update

    E-Print Network [OSTI]

    California at Davis, University of

    Retail Lighting: Title 24 & Technology Update Kelly Cunningham Outreach Director kcunning@ucdavis.edu California Lighting Technology Center, UC Davis RESEARCH . INNOVATION . PARTNERSHIP Supporting compliance Lighting: Title 24 and Technology Update C00005 Kelly Cunningham April 24,2014 #12;Credit(s) earned

  19. Stirling cycle engine

    DOE Patents [OSTI]

    Lundholm, Gunnar (Lund, SE)

    1983-01-01T23:59:59.000Z

    In a Stirling cycle engine having a plurality of working gas charges separated by pistons reciprocating in cylinders, the total gas content is minimized and the mean pressure equalization among the serial cylinders is improved by using two piston rings axially spaced at least as much as the piston stroke and by providing a duct in the cylinder wall opening in the space between the two piston rings and leading to a source of minimum or maximum working gas pressure.

  20. Update

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron SpinPrinceton PlasmaAfternoon TalksDigitalRevision to

  1. Biomass Rapid Analysis Network (BRAN)

    SciTech Connect (OSTI)

    Not Available

    2003-10-01T23:59:59.000Z

    Helping the emerging biotechnology industry develop new tools and methods for real-time analysis of biomass feedstocks, process intermediates and The Biomass Rapid Analysis Network is designed to fast track the development of modern tools and methods for biomass analysis to accelerate the development of the emerging industry. The network will be led by industry and organized and coordinated through the National Renewable Energy Lab. The network will provide training and other activities of interest to BRAN members. BRAN members will share the cost and work of rapid analysis method development, validate the new methods, and work together to develop the training for the future biomass conversion workforce.

  2. Live Webinar on Better Buildings Challenge: Public-Sector Update

    Broader source: Energy.gov [DOE]

    The Energy Department will present a live webinar titled "Better Buildings Challenge: Public-Sector Update."

  3. Federal Utility Partnership Working Group Seminar: Washington Update

    Broader source: Energy.gov [DOE]

    Presentation covers the Federal Utility Partnership Working Group Seminar: Washington Update on May 22, 2013.

  4. Nuclear fuel cycle risk assessment: survey and computer compilation of risk-related literature. [Once-through Cycle and Plutonium Recycle

    SciTech Connect (OSTI)

    Yates, K.R.; Schreiber, A.M.; Rudolph, A.W.

    1982-10-01T23:59:59.000Z

    The US Nuclear Regulatory Commission has initiated the Fuel Cycle Risk Assessment Program to provide risk assessment methods for assistance in the regulatory process for nuclear fuel cycle facilities other than reactors. Both the once-through cycle and plutonium recycle are being considered. A previous report generated by this program defines and describes fuel cycle facilities, or elements, considered in the program. This report, the second from the program, describes the survey and computer compilation of fuel cycle risk-related literature. Sources of available information on the design, safety, and risk associated with the defined set of fuel cycle elements were searched and documents obtained were catalogued and characterized with respect to fuel cycle elements and specific risk/safety information. Both US and foreign surveys were conducted. Battelle's computer-based BASIS information management system was used to facilitate the establishment of the literature compilation. A complete listing of the literature compilation and several useful indexes are included. Future updates of the literature compilation will be published periodically. 760 annotated citations are included.

  5. Rapid heating and cooling in two-dimensional Yukawa systems

    E-Print Network [OSTI]

    Yan Feng; Bin Liu; J. Goree

    2011-04-19T23:59:59.000Z

    Simulations are reported to investigate solid superheating and liquid supercooling of two-dimensional (2D) systems with a Yukawa interparticle potential. Motivated by experiments where a dusty plasma is heated and then cooled suddenly, we track particle motion using a simulation with Langevin dynamics. Hysteresis is observed when the temperature is varied rapidly in a heating and cooling cycle. As in the experiment, transient solid superheating, but not liquid supercooling, is observed. Solid superheating, which is characterized by solid structure above the melting point, is found to be promoted by a higher rate of temperature increase.

  6. Geothermal Life Cycle Calculator

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Sullivan, John

    This calculator is a handy tool for interested parties to estimate two key life cycle metrics, fossil energy consumption (Etot) and greenhouse gas emission (ghgtot) ratios, for geothermal electric power production. It is based solely on data developed by Argonne National Laboratory for DOE’s Geothermal Technologies office. The calculator permits the user to explore the impact of a range of key geothermal power production parameters, including plant capacity, lifetime, capacity factor, geothermal technology, well numbers and depths, field exploration, and others on the two metrics just mentioned. Estimates of variations in the results are also available to the user.

  7. Quantum thermodynamic cooling cycle

    E-Print Network [OSTI]

    Jose P. Palao; Ronnie Kosloff; Jeffrey M. Gordon

    2001-06-08T23:59:59.000Z

    The quantum-mechanical and thermodynamic properties of a 3-level molecular cooling cycle are derived. An inadequacy of earlier models is rectified in accounting for the spontaneous emission and absorption associated with the coupling to the coherent driving field via an environmental reservoir. This additional coupling need not be dissipative, and can provide a thermal driving force - the quantum analog of classical absorption chillers. The dependence of the maximum attainable cooling rate on temperature, at ultra-low temperatures, is determined and shown to respect the recently-established fundamental bound based on the second and third laws of thermodynamics.

  8. Geothermal Life Cycle Calculator

    SciTech Connect (OSTI)

    Sullivan, John

    2014-03-11T23:59:59.000Z

    This calculator is a handy tool for interested parties to estimate two key life cycle metrics, fossil energy consumption (Etot) and greenhouse gas emission (ghgtot) ratios, for geothermal electric power production. It is based solely on data developed by Argonne National Laboratory for DOE’s Geothermal Technologies office. The calculator permits the user to explore the impact of a range of key geothermal power production parameters, including plant capacity, lifetime, capacity factor, geothermal technology, well numbers and depths, field exploration, and others on the two metrics just mentioned. Estimates of variations in the results are also available to the user.

  9. Quantum thermodynamic cooling cycle

    E-Print Network [OSTI]

    Palao, J P; Gordon, J M; Palao, Jose P.; Kosloff, Ronnie; Gordon, Jeffrey M.

    2001-01-01T23:59:59.000Z

    The quantum-mechanical and thermodynamic properties of a 3-level molecular cooling cycle are derived. An inadequacy of earlier models is rectified in accounting for the spontaneous emission and absorption associated with the coupling to the coherent driving field via an environmental reservoir. This additional coupling need not be dissipative, and can provide a thermal driving force - the quantum analog of classical absorption chillers. The dependence of the maximum attainable cooling rate on temperature, at ultra-low temperatures, is determined and shown to respect the recently-established fundamental bound based on the second and third laws of thermodynamics.

  10. Water Cycle Pilot Study

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron SpinPrincetonUsing Maps1DOE AwardsDNitrateEnergy Watch1 Water Cycle

  11. Function Test Framework for Testing IO-Blocks in a Model-Based Rapid Prototyping Development

    E-Print Network [OSTI]

    Function Test Framework for Testing IO-Blocks in a Model-Based Rapid Prototyping Development -- Testing and verification are important methods for gaining confidence in the reliability of a software changing development cycles or that is tar- geted at many platforms. In this paper we present a test

  12. Life cycle assessment of a biomass gasification combined-cycle power system

    SciTech Connect (OSTI)

    Mann, M.K.; Spath, P.L.

    1997-12-01T23:59:59.000Z

    The potential environmental benefits from biomass power are numerous. However, biomass power may also have some negative effects on the environment. Although the environmental benefits and drawbacks of biomass power have been debated for some time, the total significance has not been assessed. This study serves to answer some of the questions most often raised in regard to biomass power: What are the net CO{sub 2} emissions? What is the energy balance of the integrated system? Which substances are emitted at the highest rates? What parts of the system are responsible for these emissions? To provide answers to these questions, a life cycle assessment (LCA) of a hypothetical biomass power plant located in the Midwest United States was performed. LCA is an analytical tool for quantifying the emissions, resource consumption, and energy use, collectively known as environmental stressors, that are associated with converting a raw material to a final product. Performed in conjunction with a technoeconomic feasibility study, the total economic and environmental benefits and drawbacks of a process can be quantified. This study complements a technoeconomic analysis of the same process, reported in Craig and Mann (1996) and updated here. The process studied is based on the concept of power Generation in a biomass integrated gasification combined cycle (BIGCC) plant. Broadly speaking, the overall system consists of biomass production, its transportation to the power plant, electricity generation, and any upstream processes required for system operation. The biomass is assumed to be supplied to the plant as wood chips from a biomass plantation, which would produce energy crops in a manner similar to the way food and fiber crops are produced today. Transportation of the biomass and other materials is by both rail and truck. The IGCC plant is sized at 113 MW, and integrates an indirectly-heated gasifier with an industrial gas turbine and steam cycle. 63 refs., 34 figs., 32 tabs.

  13. Energy storage systems cost update : a study for the DOE Energy Storage Systems Program.

    SciTech Connect (OSTI)

    Schoenung, Susan M. (Longitude 122 West, Menlo Park, CA)

    2011-04-01T23:59:59.000Z

    This paper reports the methodology for calculating present worth of system and operating costs for a number of energy storage technologies for representative electric utility applications. The values are an update from earlier reports, categorized by application use parameters. This work presents an update of energy storage system costs assessed previously and separately by the U.S. Department of Energy (DOE) Energy Storage Systems Program. The primary objective of the series of studies has been to express electricity storage benefits and costs using consistent assumptions, so that helpful benefit/cost comparisons can be made. Costs of energy storage systems depend not only on the type of technology, but also on the planned operation and especially the hours of storage needed. Calculating the present worth of life-cycle costs makes it possible to compare benefit values estimated on the same basis.

  14. PAVEMENT TECHNOLOGY UPDATE This Technology Transfer Program

    E-Print Network [OSTI]

    California at Berkeley, University of

    PAVEMENT TECHNOLOGY UPDATE This Technology Transfer Program publication is funded by the Division by the University of California Pavement Research Center. The University of California Pavement Research Center Using innovative research and sound engineering principles to improve pavement structures, materials

  15. Overview of Governor's Biofuels Coalition and Updates

    Broader source: Energy.gov [DOE]

    At the August 7, 2008 quarterly joint Web conference of DOE's Biomass and Clean Cities programs, Stacey Simms (Colorado Governor's Energy Office) provided an update on Biofuels in Colorado.

  16. Appendix DATA Attachment A: WIPP Borehole Update

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Waste Isolation Pilot Plant Carlsbad Field Office Carlsbad, New Mexico Appendix DATA-2014 Attachment A: WIPP Borehole Update Table of Contents DATA-A-1.0 WIPP Boreholes...

  17. MIT Hillel Update 24 Nissan 5771

    E-Print Network [OSTI]

    Jackson, Daniel

    Heywood '12 3. Jews on Ice "flashback" from February: Abby Klein '14, Eliana Schleifer '12, Jason Strauss '12 take a break from the skating rink. Executive Director's Update I hope everyone had a meaningful

  18. Purdue Land Use Update March 1, 2010

    E-Print Network [OSTI]

    and research (DEAD) · HB 1265 - Oil, gas, and coal bed methane property. (ALIVE) · SB 177 - Indiana Historic state parks and reservoirs (DEAD) IDEM is working to update the CAFO/CFO rules, in part because EPA has

  19. Superconducting Partnership with Readiness Review Update

    E-Print Network [OSTI]

    1 Superconducting Partnership with Industry: Readiness Review Update Mike Gouge, ORNL Steve Ashworth, LANL Paul Bakke, DOE-Golden DOE 2004 Superconductivity Peer Review July 27-29, 2004 #12;2 SPI

  20. Updating MIT's cost estimation model for shipbuilding

    E-Print Network [OSTI]

    Smith, Matthew B., Lieutenant, junior grade

    2008-01-01T23:59:59.000Z

    This thesis project will update the MIT ship cost estimation model by combining the two existing models (the Basic Military Training School (BMTS) Cost Model and the MIT Math Model) in order to develop a program that can ...

  1. Biodiesel ASTM Update and Future Technical Needs

    Broader source: Energy.gov (indexed) [DOE]

    ASTM Update and Future Technical Needs Steve Howell Technical Director National Biodiesel Board ASTM Current Status ASTM D6751 is the approved standard for B100 for blending up to...

  2. MA 266 Review Topics - Exam # 2 (updated)

    E-Print Network [OSTI]

    2012-04-23T23:59:59.000Z

    Page 1. Spring 2012. MA 266. Review Topics - Exam # 2 (updated) ..... and using a table of Laplace transforms (see table on page 317) and using linearity : L{f(t) ...

  3. Kouchoul cycle implication in the Tailer engine cycle

    SciTech Connect (OSTI)

    Arques, P.

    1996-12-31T23:59:59.000Z

    The author presents here the study of the Tailer engine modified cycle using the concept of load transfer for the Kouchoul cycle. Theoretical equations and numerical simulation of the Tailer engine modified cycle implicating the Kouchoul cycle are developed. The Tailer engine modified cycle can be improved by approaching cycles of spark plug engines by the addition of a phase of cooling of gases to the bottom dead center (bdc). This is possible only by putting a reservoir of cooled gas in communication with the cylinder to the bottom dead center. So as not to complicate the kinematic of the engine, the communication between cylinder and cooled reservoir is executed by some holes of 1 mm distributed on the whole periphery of the cylinder at the bdc.

  4. Environmental Regulatory Update Table, August 1991

    SciTech Connect (OSTI)

    Houlberg, L.M., Hawkins, G.T.; Salk, M.S.

    1991-09-01T23:59:59.000Z

    This Environmental Regulatory Update Table (August 1991) provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

  5. Environmental Regulatory Update Table, September 1991

    SciTech Connect (OSTI)

    Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

    1991-10-01T23:59:59.000Z

    The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

  6. Environmental regulatory update table, March 1989

    SciTech Connect (OSTI)

    Houlberg, L.; Langston, M.E.; Nikbakht, A.; Salk, M.S.

    1989-04-01T23:59:59.000Z

    The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

  7. Environmental regulatory update table, July 1991

    SciTech Connect (OSTI)

    Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

    1991-08-01T23:59:59.000Z

    This Environmental Regulatory Update Table (July 1991) provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

  8. Environmental Regulatory Update Table, December 1989

    SciTech Connect (OSTI)

    Houlbert, L.M.; Langston, M.E. (Tennessee Univ., Knoxville, TN (USA)); Nikbakht, A.; Salk, M.S. (Oak Ridge National Lab., TN (USA))

    1990-01-01T23:59:59.000Z

    The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

  9. Environmental Regulatory Update Table, April 1989

    SciTech Connect (OSTI)

    Houlberg, L.; Langston, M.E.; Nikbakht, A.; Salk, M.S.

    1989-05-01T23:59:59.000Z

    The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

  10. Life Cycle Inventory of a CMOS Chip

    E-Print Network [OSTI]

    Boyd, Sarah; Dornfeld, David; Krishnan, Nikhil

    2006-01-01T23:59:59.000Z

    are shown. Keywords- Life Cycle Assessment (LCA); Life Cycleindustry, and Life Cycle Assessment (LCA) is emerging as a

  11. Federal Geothermal Research Program Update Fiscal Year 2000

    SciTech Connect (OSTI)

    Renner, J.L.

    2001-08-15T23:59:59.000Z

    The Department of Energy's Geothermal Program serves two broad purposes: (1) to assist industry in overcoming near-term barriers by conducting cost-shared research and field verification that allows geothermal energy to compete in today's aggressive energy markets; and (2) to undertake fundamental research with potentially large economic payoffs. The four categories of work used to distinguish the research activities of the Geothermal Program during FY 2000 reflect the main components of real-world geothermal projects. These categories form the main sections of the project descriptions in this Research Update. Exploration Technology research focuses on developing instruments and techniques to discover hidden hydrothermal systems and to explore the deep portions of known systems. Research in geophysical and geochemical methods is expected to yield increased knowledge of hidden geothermal systems. Reservoir Technology research combines laboratory and analytical investigations with equipment development and field testing to establish practical tools for resource development and management for both hydrothermal reservoirs and enhanced geothermal systems. Research in various reservoir analysis techniques is generating a wide range of information that facilitates development of improved reservoir management tools. Drilling Technology focuses on developing improved, economic drilling and completion technology for geothermal wells. Ongoing research to avert lost circulation episodes in geothermal drilling is yielding positive results. Conversion Technology research focuses on reducing costs and improving binary conversion cycle efficiency, to permit greater use of the more abundant moderate-temperature geothermal resource, and on the development of materials that will improve the operating characteristics of many types of geothermal energy equipment. Increased output and improved performance of binary cycles will result from investigations in heat cycle research.

  12. Evaluation and Optimization of a Supercritical Carbon Dioxide Power Conversion Cycle for Nuclear Applications

    SciTech Connect (OSTI)

    Edwin A. Harvego; Michael G. McKellar

    2011-05-01T23:59:59.000Z

    There have been a number of studies involving the use of gases operating in the supercritical mode for power production and process heat applications. Supercritical carbon dioxide (CO2) is particularly attractive because it is capable of achieving relatively high power conversion cycle efficiencies in the temperature range between 550°C and 750°C. Therefore, it has the potential for use with any type of high-temperature nuclear reactor concept, assuming reactor core outlet temperatures of at least 550°C. The particular power cycle investigated in this paper is a supercritical CO2 Recompression Brayton Cycle. The CO2 Recompression Brayton Cycle can be used as either a direct or indirect power conversion cycle, depending on the reactor type and reactor outlet temperature. The advantage of this cycle when compared to the helium Brayton Cycle is the lower required operating temperature; 550°C versus 850°C. However, the supercritical CO2 Recompression Brayton Cycle requires an operating pressure in the range of 20 MPa, which is considerably higher than the required helium Brayton cycle operating pressure of 8 MPa. This paper presents results of analyses performed using the UniSim process analyses software to evaluate the performance of the supercritical CO2 Brayton Recompression Cycle for different reactor outlet temperatures. The UniSim model assumed a 600 MWt reactor power source, which provides heat to the power cycle at a maximum temperature of between 550°C and 750°C. The UniSim model used realistic component parameters and operating conditions to model the complete power conversion system. CO2 properties were evaluated, and the operating range for the cycle was adjusted to take advantage of the rapidly changing conditions near the critical point. The UniSim model was then optimized to maximize the power cycle thermal efficiency at the different maximum power cycle operating temperatures. The results of the analyses showed that power cycle thermal efficiencies in the range of 40 to 50% can be achieved.

  13. Rapidity-Dependent Jet Vetoes

    E-Print Network [OSTI]

    Shireen Gangal; Maximilian Stahlhofen; Frank J. Tackmann

    2014-12-15T23:59:59.000Z

    Jet vetoes are a prominent part of the signal selection in various analyses at the LHC. We discuss jet vetoes for which the transverse momentum of a jet is weighted by a smooth function of the jet rapidity. With a suitable choice of the rapidity-weighting function, such jet-veto variables can be factorized and resummed allowing for precise theory predictions. They thus provide a complementary way to divide phase space into exclusive jet bins. In particular, they provide a natural and theoretically clean way to implement a tight veto on central jets with the veto constraint getting looser for jets at increasingly forward rapidities. We mainly focus our discussion on the 0-jet case in color-singlet processes, using Higgs production through gluon fusion as a concrete example. For one of our jet-veto variables we compare the resummed theory prediction at NLL'+NLO with the recent differential cross section measurement by the ATLAS experiment in the $H\\to\\gamma\\gamma$ channel, finding good agreement. We also propose that these jet-veto variables can be measured and tested against theory predictions in other SM processes, such as Drell-Yan, diphoton, and weak diboson production.

  14. Stirling cycle rotary engine

    SciTech Connect (OSTI)

    Chandler, J.A.

    1988-06-28T23:59:59.000Z

    A Stirling cycle rotary engine for producing mechanical energy from heat generated by a heat source external to the engine, the engine including: an engine housing having an interior toroidal cavity with a central housing axis for receiving a working gas, the engine housing further having a cool as inlet port, a compressed gas outlet port, a heated compressed gas inlet port, and a hot exhaust gas outlet port at least three rotors each fixedly mounted to a respective rotor shaft and independently rotatable within the toroidal cavity about the central axis; each of the rotors including a pair of rotor blocks spaced radially on diametrically opposing sides of the respective rotor shaft, each rotor block having a radially fixed curva-linear outer surface for sealed rotational engagement with the engine housing.

  15. What drives glacial cycles

    SciTech Connect (OSTI)

    Broecker, W.S.; Denton, G.H.

    1990-01-01T23:59:59.000Z

    The Milankovitch theory advocates that the glacial cycles have three components: the tilt of the earth's spin axis; the shape of the earth's orbit; and the interaction between the tilt and the eccentricity effects. These three factors work together to vary the amount of sunshine reaching the high northern latitudes in summer and allow the great ice sheets to grow during intervals of cool summers and mild winters. Evidence is presented which indicates that the circulation pattern of the Atlantic ocean was shifted dramatically about 14,000 years ago, at the same time that glaciers in both hemispheres started to retreat. The authors believe that massive reorganizations of the ocean-atmosphere system are the key events that link cyclic changes in the earth's orbit to the advance and retreat of ice sheet.

  16. Open cycle thermoacoustics

    SciTech Connect (OSTI)

    Reid, Robert Stowers

    2000-01-01T23:59:59.000Z

    A new type of thermodynamic device combining a thermodynamic cycle with the externally applied steady flow of an open thermodynamic process is discussed and experimentally demonstrated. The gas flowing through this device can be heated or cooled in a series of semi-open cyclic steps. The combination of open and cyclic flows makes possible the elimination of some or all of the heat exchangers (with their associated irreversibility). Heat is directly exchanged with the process fluid as it flows through the device when operating as a refrigerator, producing a staging effect that tends to increase First Law thermodynamic efficiency. An open-flow thermoacoustic refrigerator was built to demonstrate this concept. Several approaches are presented that describe the physical characteristics of this device. Tests have been conducted on this refrigerator with good agreement with a proposed theory.

  17. Advanced regenerative absorption refrigeration cycles

    DOE Patents [OSTI]

    Dao, Kim (14 Nace Ave., Piedmont, CA 94611)

    1990-01-01T23:59:59.000Z

    Multi-effect regenerative absorption cycles which provide a high coefficient of performance (COP) at relatively high input temperatures. An absorber-coupled double-effect regenerative cycle (ADR cycle) (10) is provided having a single-effect absorption cycle (SEA cycle) (11) as a topping subcycle and a single-effect regenerative absorption cycle (1R cycle) (12) as a bottoming subcycle. The SEA cycle (11) includes a boiler (13), a condenser (21), an expansion device (28), an evaporator (31), and an absorber (40), all operatively connected together. The 1R cycle (12) includes a multistage boiler (48), a multi-stage resorber (51), a multisection regenerator (49) and also uses the condenser (21), expansion device (28) and evaporator (31) of the SEA topping subcycle (11), all operatively connected together. External heat is applied to the SEA boiler (13) for operation up to about 500 degrees F., with most of the high pressure vapor going to the condenser (21) and evaporator (31) being generated by the regenerator (49). The substantially adiabatic and isothermal functioning of the SER subcycle (12) provides a high COP. For higher input temperatures of up to 700 degrees F., another SEA cycle (111) is used as a topping subcycle, with the absorber (140) of the topping subcycle being heat coupled to the boiler (13) of an ADR cycle (10). The 1R cycle (12) itself is an improvement in that all resorber stages (50b-f) have a portion of their output pumped to boiling conduits (71a-f) through the regenerator (49), which conduits are connected to and at the same pressure as the highest pressure stage (48a) of the 1R multistage boiler (48).

  18. Recycling and Life Cycle Issues

    SciTech Connect (OSTI)

    Das, Sujit [ORNL

    2010-01-01T23:59:59.000Z

    This chapter addresses recycling and life cycle considerations related to the growing use of lightweight materials in vehicles. The chapter first addresses the benefit of a life cycle perspective in materials choice, and the role that recycling plays in reducing energy inputs and environmental impacts in a vehicle s life cycle. Some limitations of life cycle analysis and results of several vehicle- and fleet-level assessments are drawn from published studies. With emphasis on lightweight materials such as aluminum, magnesium, and polymer composites, the status of the existing recycling infrastructure and technological challenges being faced by the industry also are discussed.

  19. Glacial cycles and astronomical forcing

    SciTech Connect (OSTI)

    Muller, R.A. [Lawrence Berkeley Lab., CA (United States)] [Lawrence Berkeley Lab., CA (United States); MacDonald, G.J. [International Institute for Applied Systems Analysis, Laxenburg (Austria)] [International Institute for Applied Systems Analysis, Laxenburg (Austria)

    1997-07-11T23:59:59.000Z

    Narrow spectral features in ocean sediment records offer strong evidence that the cycles of glaciation were driven by astronomical forces. Two million years ago, the cycles match the 41,000-year period of Earth`s obliquity. This supports the Croll/Milankovitch theory, which attributes the cycles to variations in insolation. But for the past million years, the spectrum is dominated by a single 100,000-year feature and is a poor match to the predictions of insolation models. The spectrum can be accounted for by a theory that derives the cycles of glaciation from variations in the inclination of Earth`s orbital plane.

  20. Enhanced Tank Waste Strategy Update

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011 Strategic Plan Departmentof EnergyPublic LawEnergyEnhanced Reduce the life-cycle

  1. Multivariable cycle-to-cycle of an injection molding process

    E-Print Network [OSTI]

    Vanderpuije, Curtis N

    2005-01-01T23:59:59.000Z

    Cycle-to-Cycle (CtC) feedback control has been studied extensively with increasing demands on the precision and quality of manufactured parts. Single input-Single output has been studied as the basis of CtC feedback control. ...

  2. IFR fuel cycle--pyroprocess development

    SciTech Connect (OSTI)

    Laidler, J.J.; Miller, W.E.; Johnson, T.R.; Ackerman, J.P.; Battles, J.E.

    1992-11-01T23:59:59.000Z

    The Integral Fast Reactor (IFR) fuel cycle is based on the use of a metallic fuel alloy, with nominal composition U-2OPu-lOZr. In its present state of development, this fuel system offers excellent high-burnup capabilities. Test fuel has been carried to burnups in excess of 20 atom % in EBR-II irradiations, and to peak burnups over 15 atom % in FFTF. The metallic fuel possesses physical characteristics, in particular very high thermal conductivity, that facilitate a high degree of passive inherent safety in the IFR design. The fuel has been shown to provide very large margins to failure in overpower transient events. Rapid overpower transient tests carried out in the TREAT reactor have shown the capability to withstand up to 400% overpower conditions before failing. An operational transient test conducted in EBR-II at a power ramp rate of 0.1% per second reached its termination point of 130% of normal power without any fuel failures. The IFR metallic fuel also exhibits superior compatibility with the liquid sodium coolant. Equally as important as the performance advantages offered by the use of metallic fuel is the fact that this fuel system permits the use of an innovative reprocessing method, known as ``pyroprocessing,`` featuring fused-salt electrorefining of the spent fuel. Development of the IFR pyroprocess has been underway at the Argonne National Laboratory for over five years, and great progress has been made toward establishing a commercially-viable process. Pyroprocessing offers a simple, compact means for closure of the fuel cycle, with anticipated significant savings in fuel cycle costs.

  3. IFR fuel cycle--pyroprocess development

    SciTech Connect (OSTI)

    Laidler, J.J.; Miller, W.E.; Johnson, T.R.; Ackerman, J.P.; Battles, J.E.

    1992-01-01T23:59:59.000Z

    The Integral Fast Reactor (IFR) fuel cycle is based on the use of a metallic fuel alloy, with nominal composition U-2OPu-lOZr. In its present state of development, this fuel system offers excellent high-burnup capabilities. Test fuel has been carried to burnups in excess of 20 atom % in EBR-II irradiations, and to peak burnups over 15 atom % in FFTF. The metallic fuel possesses physical characteristics, in particular very high thermal conductivity, that facilitate a high degree of passive inherent safety in the IFR design. The fuel has been shown to provide very large margins to failure in overpower transient events. Rapid overpower transient tests carried out in the TREAT reactor have shown the capability to withstand up to 400% overpower conditions before failing. An operational transient test conducted in EBR-II at a power ramp rate of 0.1% per second reached its termination point of 130% of normal power without any fuel failures. The IFR metallic fuel also exhibits superior compatibility with the liquid sodium coolant. Equally as important as the performance advantages offered by the use of metallic fuel is the fact that this fuel system permits the use of an innovative reprocessing method, known as pyroprocessing,'' featuring fused-salt electrorefining of the spent fuel. Development of the IFR pyroprocess has been underway at the Argonne National Laboratory for over five years, and great progress has been made toward establishing a commercially-viable process. Pyroprocessing offers a simple, compact means for closure of the fuel cycle, with anticipated significant savings in fuel cycle costs.

  4. Interagency Sustainability Working Group: Update Report; December 2009, Federal Energy Management Program (FEMP) (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2009-12-01T23:59:59.000Z

    December 2009 update report offered by the Interagency Sustainability Working Group (ISWG). This report is updated bi-annually.

  5. National Bioenergy Center, Biochemical Platform Integration Project: Quarterly Update, Winter 2011-2012 (Newsletter)

    SciTech Connect (OSTI)

    Not Available

    2012-04-01T23:59:59.000Z

    Winter 2011-2012 issue of the National Bioenergy Center Biochemical Platform Integration Project quarterly update. Issue topics: 34th Symposium on Biotechnology for Fuels and Chemicals; feasibility of NIR spectroscopy-based rapid feedstock reactive screening; demonstrating integrated pilot-scale biomass conversion. The Biochemical Process Integration Task focuses on integrating the processing steps in enzyme-based lignocellulose conversion technology. This project supports the U.S. Department of Energy's efforts to foster development, demonstration, and deployment of 'biochemical platform' biorefineries that economically produce ethanol or other fuels, as well as commodity sugars and a variety of other chemical products, from renewable lignocellulosic biomass.

  6. Rapid thermal processing by stamping

    DOE Patents [OSTI]

    Stradins, Pauls; Wang, Qi

    2013-03-05T23:59:59.000Z

    A rapid thermal processing device and methods are provided for thermal processing of samples such as semiconductor wafers. The device has components including a stamp (35) having a stamping surface and a heater or cooler (40) to bring it to a selected processing temperature, a sample holder (20) for holding a sample (10) in position for intimate contact with the stamping surface; and positioning components (25) for moving the stamping surface and the stamp (35) in and away from intimate, substantially non-pressured contact. Methods for using and making such devices are also provided. These devices and methods allow inexpensive, efficient, easily controllable thermal processing.

  7. MODELING HORMONAL CONTROL MENSTRUAL CYCLE

    E-Print Network [OSTI]

    MODELING HORMONAL CONTROL OF THE MENSTRUAL CYCLE James F. Selgrade Department of Mathematics of five hormones important for regulation and maintenance of the menstrual cycle. Models which correctly@math.ncsu.edu Abstract This study presents a strategy for developing a mathematical model describing the concentrations

  8. Nuclear fuel cycle information workshop

    SciTech Connect (OSTI)

    Not Available

    1983-01-01T23:59:59.000Z

    This overview of the nuclear fuel cycle is divided into three parts. First, is a brief discussion of the basic principles of how nuclear reactors work; second, is a look at the major types of nuclear reactors being used and world-wide nuclear capacity; and third, is an overview of the nuclear fuel cycle and the present industrial capability in the US.

  9. Orbital Resonance and Solar Cycles

    E-Print Network [OSTI]

    P. A. Semi

    2009-03-29T23:59:59.000Z

    We present an analysis of planetary moves, encoded in DE406 ephemerides. We show resonance cycles between most planets in Solar System, of differing quality. The most precise resonance - between Earth and Venus, which not only stabilizes orbits of both planets, locks planet Venus rotation in tidal locking, but also affects the Sun: This resonance group (E+V) also influences Sunspot cycles - the position of syzygy between Earth and Venus, when the barycenter of the resonance group most closely approaches the Sun and stops for some time, relative to Jupiter planet, well matches the Sunspot cycle of 11 years, not only for the last 400 years of measured Sunspot cycles, but also in 1000 years of historical record of "severe winters". We show, how cycles in angular momentum of Earth and Venus planets match with the Sunspot cycle and how the main cycle in angular momentum of the whole Solar system (854-year cycle of Jupiter/Saturn) matches with climatologic data, assumed to show connection with Solar output power and insolation. We show the possible connections between E+V events and Solar global p-Mode frequency changes. We futher show angular momentum tables and charts for individual planets, as encoded in DE405 and DE406 ephemerides. We show, that inner planets orbit on heliocentric trajectories whereas outer planets orbit on barycentric trajectories.

  10. Notices 20 Miles Northwest of Rapid City SD Rapid City SD 57702

    Broader source: Energy.gov (indexed) [DOE]

    Notices 20 Miles Northwest of Rapid City SD Rapid City SD 57702 Landholding Agency: Agriculture Property Number: 15201410016 Status: Excess Comments: off-site removal only; 55 sq....

  11. Life Cycle Asset Management

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1998-10-14T23:59:59.000Z

    (The following directives are deleted or consolidated into this Order and shall be phased out as noted in Paragraph 2: DOE 1332.1A; DOE 4010.1A; DOE 4300.1C; DOE 4320.1B; DOE 4320.2A; DOE 4330.4B; DOE 4330.5; DOE 4540.1C; DOE 4700.1). This Order supersedes specific project management provisions within DOE O 430.1A, LIFE CYCLE ASSET MANAGEMENT. The specific paragraphs canceled by this Order are 6e(7); 7a(3); 7b(11) and (14); 7c(4),(6),(7),(11), and (16); 7d(4) and (8); 7e(3),(10), and (17); Attachment 1, Definitions (item 30 - Line Item Project, item 42 - Project, item 48 - Strategic System); and Attachment 2, Contractor Requirements Document (paragraph 1d regarding a project management system). The remainder of DOE O 430.1A remains in effect. Cancels DOE O 430.1. Canceled by DOE O 413.3.

  12. Biomass Gasification Combined Cycle

    SciTech Connect (OSTI)

    Judith A. Kieffer

    2000-07-01T23:59:59.000Z

    Gasification combined cycle continues to represent an important defining technology area for the forest products industry. The ''Forest Products Gasification Initiative'', organized under the Industry's Agenda 2020 technology vision and supported by the DOE ''Industries of the Future'' program, is well positioned to guide these technologies to commercial success within a five-to ten-year timeframe given supportive federal budgets and public policy. Commercial success will result in significant environmental and renewable energy goals that are shared by the Industry and the Nation. The Battelle/FERCO LIVG technology, which is the technology of choice for the application reported here, remains of high interest due to characteristics that make it well suited for integration with the infrastructure of a pulp production facility. The capital cost, operating economics and long-term demonstration of this technology area key input to future economically sustainable projects and must be verified by the 200 BDT/day demonstration facility currently operating in Burlington, Vermont. The New Bern application that was the initial objective of this project is not currently economically viable and will not be implemented at this time due to several changes at and around the mill which have occurred since the inception of the project in 1995. The analysis shows that for this technology, and likely other gasification technologies as well, the first few installations will require unique circumstances, or supportive public policies, or both to attract host sites and investors.

  13. Gap Assessment (FY 13 Update)

    SciTech Connect (OSTI)

    Getman, Dan

    2013-09-30T23:59:59.000Z

    To help guide its future data collection efforts, The DOE GTO funded a data gap analysis in FY2012 to identify high potential hydrothermal areas where critical data are needed. This analysis was updated in FY2013 and the resulting datasets are represented by this metadata. The original process was published in FY 2012 and is available here: https://pangea.stanford.edu/ERE/db/GeoConf/papers/SGW/2013/Esposito.pdf Though there are many types of data that can be used for hydrothermal exploration, five types of exploration data were targeted for this analysis. These data types were selected for their regional reconnaissance potential, and include many of the primary exploration techniques currently used by the geothermal industry. The data types include: 1. well data 2. geologic maps 3. fault maps 4. geochemistry data 5. geophysical data To determine data coverage, metadata for exploration data (including data type, data status, and coverage information) were collected and catalogued from nodes on the National Geothermal Data System (NGDS). It is the intention of this analysis that the data be updated from this source in a semi-automated fashion as new datasets are added to the NGDS nodes. In addition to this upload, an online tool was developed to allow all geothermal data providers to access this assessment and to directly add metadata themselves and view the results of the analysis via maps of data coverage in Geothermal Prospector (http://maps.nrel.gov/gt_prospector). A grid of the contiguous U.S. was created with 88,000 10-km by 10-km grid cells, and each cell was populated with the status of data availability corresponding to the five data types. Using these five data coverage maps and the USGS Resource Potential Map, sites were identified for future data collection efforts. These sites signify both that the USGS has indicated high favorability of occurrence of geothermal resources and that data gaps exist. The uploaded data are contained in two data files for each data category. The first file contains the grid and is in the SHP file format (shape file.) Each populated grid cell represents a 10k area within which data is known to exist. The second file is a CSV (comma separated value) file that contains all of the individual layers that intersected with the grid. This CSV can be joined with the map to retrieve a list of datasets that are available at any given site. The attributes in the CSV include: 1. grid_id : The id of the grid cell that the data intersects with 2. title: This represents the name of the WFS service that intersected with this grid cell 3. abstract: This represents the description of the WFS service that intersected with this grid cell 4. gap_type: This represents the category of data availability that these data fall within. As the current processing is pulling data from NGDS, this category universally represents data that are available in the NGDS and are ready for acquisition for analytic purposes. 5. proprietary_type: Whether the data are considered proprietary 6. service_type: The type of service 7. base_url: The service URL

  14. Fuel cycle cost uncertainty from nuclear fuel cycle comparison

    SciTech Connect (OSTI)

    Li, J.; McNelis, D. [Institute for the Environment, University of North Carolina, Chapel Hill (United States); Yim, M.S. [Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology (Korea, Republic of)

    2013-07-01T23:59:59.000Z

    This paper examined the uncertainty in fuel cycle cost (FCC) calculation by considering both model and parameter uncertainty. Four different fuel cycle options were compared in the analysis including the once-through cycle (OT), the DUPIC cycle, the MOX cycle and a closed fuel cycle with fast reactors (FR). The model uncertainty was addressed by using three different FCC modeling approaches with and without the time value of money consideration. The relative ratios of FCC in comparison to OT did not change much by using different modeling approaches. This observation was consistent with the results of the sensitivity study for the discount rate. Two different sets of data with uncertainty range of unit costs were used to address the parameter uncertainty of the FCC calculation. The sensitivity study showed that the dominating contributor to the total variance of FCC is the uranium price. In general, the FCC of OT was found to be the lowest followed by FR, MOX, and DUPIC. But depending on the uranium price, the FR cycle was found to have lower FCC over OT. The reprocessing cost was also found to have a major impact on FCC.

  15. Rapid starting methanol reactor system

    DOE Patents [OSTI]

    Chludzinski, Paul J. (38 Berkshire St., Swampscott, MA 01907); Dantowitz, Philip (39 Nancy Ave., Peabody, MA 01960); McElroy, James F. (12 Old Cart Rd., Hamilton, MA 01936)

    1984-01-01T23:59:59.000Z

    The invention relates to a methanol-to-hydrogen cracking reactor for use with a fuel cell vehicular power plant. The system is particularly designed for rapid start-up of the catalytic methanol cracking reactor after an extended shut-down period, i.e., after the vehicular fuel cell power plant has been inoperative overnight. Rapid system start-up is accomplished by a combination of direct and indirect heating of the cracking catalyst. Initially, liquid methanol is burned with a stoichiometric or slightly lean air mixture in the combustion chamber of the reactor assembly. The hot combustion gas travels down a flue gas chamber in heat exchange relationship with the catalytic cracking chamber transferring heat across the catalyst chamber wall to heat the catalyst indirectly. The combustion gas is then diverted back through the catalyst bed to heat the catalyst pellets directly. When the cracking reactor temperature reaches operating temperature, methanol combustion is stopped and a hot gas valve is switched to route the flue gas overboard, with methanol being fed directly to the catalytic cracking reactor. Thereafter, the burner operates on excess hydrogen from the fuel cells.

  16. Advanced Fuel Cycle Economic Analysis of Symbiotic Light-Water Reactor and Fast Burner Reactor Systems

    SciTech Connect (OSTI)

    D. E. Shropshire

    2009-01-01T23:59:59.000Z

    The Advanced Fuel Cycle Economic Analysis of Symbiotic Light-Water Reactor and Fast Burner Reactor Systems, prepared to support the U.S. Advanced Fuel Cycle Initiative (AFCI) systems analysis, provides a technology-oriented baseline system cost comparison between the open fuel cycle and closed fuel cycle systems. The intent is to understand their overall cost trends, cost sensitivities, and trade-offs. This analysis also improves the AFCI Program’s understanding of the cost drivers that will determine nuclear power’s cost competitiveness vis-a-vis other baseload generation systems. The common reactor-related costs consist of capital, operating, and decontamination and decommissioning costs. Fuel cycle costs include front-end (pre-irradiation) and back-end (post-iradiation) costs, as well as costs specifically associated with fuel recycling. This analysis reveals that there are large cost uncertainties associated with all the fuel cycle strategies, and that overall systems (reactor plus fuel cycle) using a closed fuel cycle are about 10% more expensive in terms of electricity generation cost than open cycle systems. The study concludes that further U.S. and joint international-based design studies are needed to reduce the cost uncertainties with respect to fast reactor, fuel separation and fabrication, and waste disposition. The results of this work can help provide insight to the cost-related factors and conditions needed to keep nuclear energy (including closed fuel cycles) economically competitive in the U.S. and worldwide. These results may be updated over time based on new cost information, revised assumptions, and feedback received from additional reviews.

  17. Policy Flash 2013-36 Update to Congressional Notifications -...

    Office of Environmental Management (EM)

    Policy Flash 2013-36 Update to Congressional Notifications - Acquisition Guide Chapter 5.1 and Guide to Financial Assistance Chapter 2, Section 2.6.1 Policy Flash 2013-36 Update to...

  18. Updated Capital Cost Estimates for Utility Scale Electricity

    E-Print Network [OSTI]

    Updated Capital Cost Estimates for Utility Scale Electricity Generating Plants April 2013 Information Administration | Updated Capital Cost Estimates for Utility Scale Electricity Generating Plants ii for Utility Scale Electricity Generating Plants ii Contents Introduction

  19. Renewable, Green LNG: Update on the World's Largest Landill Gass...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Renewable, Green LNG: Update on the World's Largest Landill Gass to LNG Plant Renewable, Green LNG: Update on the World's Largest Landill Gass to LNG Plant Presentation at the...

  20. Renewable LNG: Update on the World's Largest Landfill Gas to...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LNG: Update on the World's Largest Landfill Gas to LNG Plant Renewable LNG: Update on the World's Largest Landfill Gas to LNG Plant Success story about LNG from landfill gas....

  1. updated 10/08/10 seo5 Graduate Student Activities

    E-Print Network [OSTI]

    Yang, Sichun

    updated 10/08/10 ­ seo5 Graduate Student Activities Biomedical Graduate Student. Coordinator 368.3431 Cdy5@case.edu BRB 7 th #12;updated 10/08/10 ­ seo5 Molecular Medicine Contact

  2. National Solar Radiation Database 1991-2005 Update: User's Manual

    SciTech Connect (OSTI)

    Wilcox, S.

    2007-04-01T23:59:59.000Z

    This manual describes how to obtain and interpret the data products from the updated 1991-2005 National Solar Radiation Database (NSRDB). This is an update of the original 1961-1990 NSRDB released in 1992.

  3. WINDExchange Webinar: Small and Distributed Wind Turbine Update...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Webinar: Small and Distributed Wind Turbine Update WINDExchange Webinar: Small and Distributed Wind Turbine Update December 17, 2014 3:00PM to 5:00PM EST Add to calendar Save the...

  4. T-605: Oracle Critical Patch Update Advisory- April 2011

    Broader source: Energy.gov [DOE]

    A Critical Patch Update is a collection of patches for multiple security vulnerabilities. It also includes non-security fixes that are required because of interdependencies by those security patches. Critical Patch Updates are cumulative.

  5. T-537: Oracle Critical Patch Update Advisory- January 2011

    Broader source: Energy.gov [DOE]

    A Critical Patch Update is a collection of patches for multiple security vulnerabilities. It also includes non-security fixes that are required because of interdependencies by those security patches. Critical Patch Updates are cumulative.

  6. FEMP (Federal Energy Management Program) Update, Spring 1989

    SciTech Connect (OSTI)

    Not Available

    1989-04-01T23:59:59.000Z

    The FEMP Update, published quarterly by the Federal Energy Management Program (FEMP), provides information that will assist federal managers in their energy management responsibilities. The Update is distributed primarily to federal facility and energy management personnel.

  7. Interim Update: Global Automotive Power Electronics R&D Relevant...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Interim Update: Global Automotive Power Electronics R&D Relevant To DOE 2015 and 2020 Cost Targets Interim Update: Global Automotive Power Electronics R&D Relevant To DOE 2015 and...

  8. Vogtle 4th Quarter 2012 Construction Update | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Vogtle 4th Quarter 2012 Construction Update Vogtle 4th Quarter 2012 Construction Update Addthis See the progress Southern Company is making on Vogtle 3&4 construction, the nation's...

  9. An ideal sealed source life-cycle

    SciTech Connect (OSTI)

    Tompkins, Joseph Andrew [Los Alamos National Laboratory

    2009-01-01T23:59:59.000Z

    In the last 40 years, barriers to compliant and timely disposition of radioactive sealed sources have become apparent. The story starts with the explosive growth of nuclear gauging technologies in the 1960s. Dozens of companies in the US manufactured sources and many more created nuclear solutions to industrial gauging problems. Today they do not yet know how many Cat 1, 2, or 3 sources there are in the US. There are, at minimum, tens of thousands of sources, perhaps hundreds of thousands of sources. Affordable transportation solutions to consolidate all of these sources and disposition pathways for these sources do not exist. The root problem seems to be a lack of necessary regulatory framework that has allowed all of these problems to accumulate with no national plan for solving the problem. In the 1960s, Pu-238 displaced Pu-239 for most neutron and alpha source applications. In the 1970s, the availability of inexpensive Am-241 resulted in a proliferation of low energy gamma sources used in nuclear gauging, well logging, pacemakers, and X-ray fluorescence applications for example. In the 1980s, rapid expansion of worldwide petroleum exploration resulted in the expansion of Am-241 sources into international locations. Improvements of technology and regulation resulted in a change in isotopic distribution as Am-241 made Pu-239 and Pu-238 obsolete. Many early nuclear gauge technologies have been made obsolete as they were replaced by non-nuclear technoogies. With uncertainties in source end of life disposition and increased requirements for sealed source security, nuclear gauging technology is the last choice for modern process engineering gauging solutions. Over the same period, much was learned about licensing LLW disposition facilities as evident by the closure of early disposition facilities like Maxey Flats. The current difficulties in sealed source disposition start with adoption of the NLLW policy act of 1985, which created the state LLW compact system they we have today. This regulation created a new regulatory framework seen as promising at the time. However, now they recognize that, despite the good intentions, the NIJWP/85 has not solved any source disposition problems. The answer to these sealed source disposition problems is to adopt a philosophy to correct these regulatory issues, determine an interim solution, execute that solution until there is a minimal backlog of sources to deal with, and then let the mechanisms they have created solve this problem into the foreseeable future. The primary philosophical tenet of the ideal sealed source life cycle follows. You do not allow the creation (or importation) of any source whose use cannot be justified, which cannot be affordably shipped, or that does not have a well-delinated and affordable disposition pathway. The path forward dictates that we fix the problem by embracing the Ideal Source Life cycle. In figure 1, we can see some of the elements of the ideal source life cycle. The life cycle is broken down into four portions, manufacture, use, consolidation, and disposition. These four arbitrary elements allow them to focus on the ideal life cycle phases that every source should go through between manufacture and final disposition. As we examine the various phases of the sealed source life cycle, they pick specific examples and explore the adoption of the ideal life cycle model.

  10. Updated greenhouse gas and criteria air pollutant emission factors and their probability distribution functions for electricity generating units

    SciTech Connect (OSTI)

    Cai, H.; Wang, M.; Elgowainy, A.; Han, J. (Energy Systems)

    2012-07-06T23:59:59.000Z

    Greenhouse gas (CO{sub 2}, CH{sub 4} and N{sub 2}O, hereinafter GHG) and criteria air pollutant (CO, NO{sub x}, VOC, PM{sub 10}, PM{sub 2.5} and SO{sub x}, hereinafter CAP) emission factors for various types of power plants burning various fuels with different technologies are important upstream parameters for estimating life-cycle emissions associated with alternative vehicle/fuel systems in the transportation sector, especially electric vehicles. The emission factors are typically expressed in grams of GHG or CAP per kWh of electricity generated by a specific power generation technology. This document describes our approach for updating and expanding GHG and CAP emission factors in the GREET (Greenhouse Gases, Regulated Emissions, and Energy Use in Transportation) model developed at Argonne National Laboratory (see Wang 1999 and the GREET website at http://greet.es.anl.gov/main) for various power generation technologies. These GHG and CAP emissions are used to estimate the impact of electricity use by stationary and transportation applications on their fuel-cycle emissions. The electricity generation mixes and the fuel shares attributable to various combustion technologies at the national, regional and state levels are also updated in this document. The energy conversion efficiencies of electric generating units (EGUs) by fuel type and combustion technology are calculated on the basis of the lower heating values of each fuel, to be consistent with the basis used in GREET for transportation fuels. On the basis of the updated GHG and CAP emission factors and energy efficiencies of EGUs, the probability distribution functions (PDFs), which are functions that describe the relative likelihood for the emission factors and energy efficiencies as random variables to take on a given value by the integral of their own probability distributions, are updated using best-fit statistical curves to characterize the uncertainties associated with GHG and CAP emissions in life-cycle modeling with GREET.

  11. Clean Coal Technology Programs: Program Update 2009

    SciTech Connect (OSTI)

    None

    2009-10-01T23:59:59.000Z

    The purpose of the Clean Coal Technology Programs: Program Update 2009 is to provide an updated status of the U.S. Department of Energy (DOE) commercial-scale demonstrations of clean coal technologies (CCT). These demonstrations have been performed under the Clean Coal Technology Demonstration Program (CCTDP), the Power Plant Improvement Initiative (PPII), and the Clean Coal Power Initiative (CCPI). Program Update 2009 provides: (1) a discussion of the role of clean coal technology demonstrations in improving the nation’s energy security and reliability, while protecting the environment using the nation’s most abundant energy resource—coal; (2) a summary of the funding and costs of the demonstrations; and (3) an overview of the technologies being demonstrated, along with fact sheets for projects that are active, recently completed, or recently discontinued.

  12. Clean coal technology programs: program update 2006

    SciTech Connect (OSTI)

    NONE

    2006-09-15T23:59:59.000Z

    The purpose of the Clean Coal Technology Programs: Program Update 2006 is to provide an updated status of the DOE commercial-scale demonstrations of clean coal technologies (CCTs). These demonstrations are performed under the Clean Coal Technology Demonstration Program (CCTDP), the Power Plant Improvement Initiative (PPII) and the Clean Coal Power Initiative (CCPI). Program Update 2006 provides 1) a discussion of the role of clean coal technology demonstrations in improving the nation's energy security and reliability, while protecting the environment using the nation's most abundant energy resource - coal; 2) a summary of the funding and costs of the demonstrations; and 3) an overview of the technologies being demonstrated, with fact sheets for demonstration projects that are active, recently completed, withdrawn or ended, including status as of June 30 2006. 4 apps.

  13. NNSA Updates Export Control Regulation | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    Updates Export Control Regulation | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation...

  14. US Releases Updated Plutonium Inventory Report | National Nuclear...

    National Nuclear Security Administration (NNSA)

    Releases Updated Plutonium Inventory Report | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing...

  15. U-060: Security update: Hotfix available for ColdFusion

    Broader source: Energy.gov [DOE]

    Vulnerabilities have been identified in ColdFusion 9.0.1 and earlier versions for Windows, Macintosh and UNIX. These vulnerabilities could lead to a cross-site scripting attack. Adobe categorizes this as an important update and recommends that users apply the latest update for their product installation.This update resolves a cross-site scripting vulnerability in cfform tag (CVE-2011-2463). This update resolves a cross-site scripting vulnerability in RDS (CVE-2011-4368).

  16. Understanding the ocean carbon and sulfur cycles in the context of a variable ocean : a study of anthropogenic carbon storage and dimethylsulfide production in the Atlantic Ocean

    E-Print Network [OSTI]

    Levine, Naomi Marcil

    2010-01-01T23:59:59.000Z

    Anthropogenic activity is rapidly changing the global climate through the emission of carbon dioxide. Ocean carbon and sulfur cycles have the potential to impact global climate directly and through feedback loops. Numerical ...

  17. CLARIFICATION: Incorporation of OFPC Manual and Document Updates Updated documents should be incorporated in to projects as follows

    E-Print Network [OSTI]

    O'Toole, Alice J.

    CLARIFICATION: Incorporation of OFPC Manual and Document Updates Updated documents should be incorporated in to projects as follows: Project Management Manual (PMM) and Construction Inspection Manual (CIM approved by senior project management, project managers shall require the design professional

  18. State energy-price system: 1981 update

    SciTech Connect (OSTI)

    Fang, J.M.; Imhoff, K.L.; Hood, L.J.

    1983-08-01T23:59:59.000Z

    This report updates the State Energy Price Data System (STEPS) to include state-level energy prices by fuel and by end-use sectors for 1981. Both physical unit prices and Btu prices are presented. Basic documentation of the data base remains generally the same as in the original report: State Energy Price System; Volume 1: Overview and Technical Documentation (DOE/NBB-0029 Volume 1 of 2, November 1982). The present report documents only the changes in procedures necessitated by the update to 1981 and the corrections to the basic documentation.

  19. Federal Research Update Webinar Wednesday October 31 Friday November 2

    E-Print Network [OSTI]

    Maryland, Baltimore County, University of

    for Teaching and Learning, National Center for Education Research, Department of Education, on updates of EDFederal Research Update Webinar Wednesday October 31 ­ Friday November 2 Hosted by The Office will be provided. #12;Federal Research Update Webinar Monday October 29 ­ Friday November 2 Wednesday, October 31

  20. Updated 07/20/2012 Office of International Education

    E-Print Network [OSTI]

    Hall, Daniel

    Updated 07/20/2012 Office of International Education International Student, Scholar databases to update your arrival information. Make sure your SEVIS record is up-to-date and in active all the databases time to update with your new information. Bring all your paperwork. When you go

  1. Update: nuclear power program information and data, March-April 1981

    SciTech Connect (OSTI)

    Not Available

    1981-01-01T23:59:59.000Z

    UPDATE is published by the Office of Coordination and Special Projects, Office of Nuclear Reactor Programs, to provide a quick reference source on the current status of nuclear powerplant construction and operation in the United States and for information on the fuel cycle, economics, and performance of nuclear generating units. Similar information on other means of electric generation as related to nuclear power is included when appropriate. The subject matter of the reports and analyses presented in UPDATE will vary from issue to issue, reflecting changes in foci of interest and new developments in the field of commercial nuclear power generation. UPDATE is intended to provide a timely source of current statistics, results of analyses, and programmatic information proceeding from the activities of the Office of Nuclear Reactor Programs and other components of the Department of Energy, as well as condensations of topical articles from other sources of interest to the nuclear community. It also facilitates quick responses to requests for data and information of the type often solicited from this office.

  2. Update: nuclear power program information and data, October-December 1981

    SciTech Connect (OSTI)

    Not Available

    1981-01-01T23:59:59.000Z

    UPDATE is published by the Office of Coordination and Special Projects, Office of Nuclear Reactor Programs, to provide a quick reference source on the current status of nuclear powerplant construction and operation in the United States and for information on the fuel cycle, economics, and performance of nuclear generating units. Similar information on other means of electric generation as related to nuclear power is included when appropriate. The subject matter of the reports and analyses presented in UPDATE will vary from issue to issue, reflecting changes in foci of interest and new developments in the field of commercial nuclear power generation. UPDATE is intended to provide a timely source of current statistics, results of analyses, and programmatic information proceeding from the activities of the Office of Nuclear Reactor Programs and other components of the Department of Energy, as well as condensations of topical articles from other sources of interest to the nuclear community. It also facilitates quick responses to requests for data and information of the type often solicited from this office.

  3. Updated NGNP Fuel Acquisition Strategy

    SciTech Connect (OSTI)

    David Petti; Tim Abram; Richard Hobbins; Jim Kendall

    2010-12-01T23:59:59.000Z

    A Next Generation Nuclear Plant (NGNP) fuel acquisition strategy was first established in 2007. In that report, a detailed technical assessment of potential fuel vendors for the first core of NGNP was conducted by an independent group of international experts based on input from the three major reactor vendor teams. Part of the assessment included an evaluation of the credibility of each option, along with a cost and schedule to implement each strategy compared with the schedule and throughput needs of the NGNP project. While credible options were identified based on the conditions in place at the time, many changes in the assumptions underlying the strategy and in externalities that have occurred in the interim requiring that the options be re-evaluated. This document presents an update to that strategy based on current capabilities for fuel fabrication as well as fuel performance and qualification testing worldwide. In light of the recent Pebble Bed Modular Reactor (PBMR) project closure, the Advanced Gas Reactor (AGR) fuel development and qualification program needs to support both pebble and prismatic options under the NGNP project. A number of assumptions were established that formed a context for the evaluation. Of these, the most important are: • Based on logistics associated with the on-going engineering design activities, vendor teams would start preliminary design in October 2012 and complete in May 2014. A decision on reactor type will be made following preliminary design, with the decision process assumed to be completed in January 2015. Thus, no fuel decision (pebble or prismatic) will be made in the near term. • Activities necessary for both pebble and prismatic fuel qualification will be conducted in parallel until a fuel form selection is made. As such, process development, fuel fabrication, irradiation, and testing for pebble and prismatic options should not negatively influence each other during the period prior to a decision on reactor type. • Additional funding will be made available beginning in fiscal year (FY) 2012 to support pebble bed fuel fabrication process development and fuel testing while maintaining the prismatic fuel schedule. Options for fuel fabrication for prismatic and pebble bed were evaluated based on the credibility of each option, along with a cost and schedule to implement each strategy. The sole prismatic option is Babcock and Wilcox (B&W) producing uranium oxycarbide (UCO) tristructural-isotropic (TRISO) fuel particles in compacts. This option finishes in the middle of 2022 . Options for the pebble bed are Nuclear Fuel Industries (NFI) in Japan producing uranium dioxide (UO2) TRISO fuel particles, and/or B&W producing UCO or UO2 TRISO fuel particles. All pebble options finish in mid to late 2022.

  4. Quantifying the Improvements in Rapid Prototyping and Product Life Cycle Performance Created by Machining

    E-Print Network [OSTI]

    2013-01-01T23:59:59.000Z

    improve manufacturing. Keywords: Machining, Laser ablation,manufacturing technology. The first project compared micromilling to laser

  5. Rapid thermal cycling of metal-supported solid oxide fuel cell membranes

    E-Print Network [OSTI]

    Matus, Yuriy B.; De Jonghe, Lutgard C.; Jacobson, Craig P.; Visco, Steven J.

    2004-01-01T23:59:59.000Z

    co- firing at 1350°C. LSCF cathode L SCF cathode Electrolyte+6AT supported fuel cell with LSCF cathode before and afterProducts, Inc. Subsequently, LSCF (La 0.6 Sr 0.4 Co 0.8 FeO

  6. Resonant circuit which provides dual-frequency excitation for rapid cycling of an electromagnet

    DOE Patents [OSTI]

    Praeg, W.F.

    1982-03-09T23:59:59.000Z

    Disclosed is a novel ring-magnet control circuit that permits synchrotron repetition rates much higher than the frequency of the sinusoidal guide field of the ring magnet during particle acceleration. The control circuit generates sinusoidal excitation currents of different frequencies in the half waves. During radio-frequency acceleration of the synchrotron, the control circuit operates with a lower frequency sine wave and, thereafter, the electromagnets are reset with a higher-frequency half sine wave.

  7. Quantifying the Improvements in Rapid Prototyping and Product Life Cycle Performance Created by Machining

    E-Print Network [OSTI]

    2013-01-01T23:59:59.000Z

    use additional performance indicators (e.g. , consumption ofto calculate the key performance indicators (KP|s). This

  8. Rapid thermal cycling of metal-supported solid oxide fuel cell membranes

    E-Print Network [OSTI]

    Matus, Yuriy B.; De Jonghe, Lutgard C.; Jacobson, Craig P.; Visco, Steven J.

    2004-01-01T23:59:59.000Z

    SOFC electrolyte layer after co- firing at 1350°C. LSCFSOFC test rig did not to lead to a usable cathode. In contrast, LSCF

  9. Experimental litterfall manipulation drives large and rapid changes in soil carbon cycling in a wet tropical

    E-Print Network [OSTI]

    Townsend, Alan

    biomass, microbial biomass, soil moisture, and nutrient fluxes. However, the litter manipulations had only, and microbial processes in response to litter manipulation reflect shifts in the quantity rather than quality analysis showed that variations in CO2 fluxes were strongly correlated with microbial biomass pools, soil C

  10. Rapid Communication Modest summer temperature variability during DO cycles in western Europe

    E-Print Network [OSTI]

    Wohlfarth, Barbara

    February 2010 Accepted 1 March 2010 a b s t r a c t Abrupt climatic shifts between cold stadials and warm is registered in paleorecords worldwide, but little is known about the actual temperature change both annually characterised by distinct changes in seasonality in the Northern Hemisphere. The largest temperature change

  11. Cycle-to-cycle control of reconfigurable die sheet metal forming

    E-Print Network [OSTI]

    Vaughan, Chester Dewey

    2004-01-01T23:59:59.000Z

    This research addresses cycle to cycle control as applied to a sheet metal stretch forming process. More specifically, it attempts to validate the use of cycle to cycle (CtC) control for a multiple input-multiple output ...

  12. Life Cycle Inventory of a CMOS Chip

    E-Print Network [OSTI]

    Boyd, Sarah; Dornfeld, David; Krishnan, Nikhil

    2006-01-01T23:59:59.000Z

    Reichl, H. “Life cycle inventory analysis and identificationAllen, D.T. ; “Life cycle inventory development for waferLife Cycle Inventory of a CMOS Chip Sarah Boyd and David

  13. Sustainability Features of Nuclear Fuel Cycle Options

    E-Print Network [OSTI]

    Passerini, Stefano

    The nuclear fuel cycle is the series of stages that nuclear fuel materials go through in a cradle to grave framework. The Once Through Cycle (OTC) is the current fuel cycle implemented in the United States; in which an ...

  14. Life-cycle Assessment of Semiconductors

    E-Print Network [OSTI]

    Boyd, Sarah B.

    2009-01-01T23:59:59.000Z

    yield. A hybrid life cycle assessment (LCA) model is used;more accurate life-cycle assessment (LCA) of electronicthe purposes of life-cycle assessment (LCA). While it may be

  15. Optimization of Air Conditioning Cycling

    E-Print Network [OSTI]

    Seshadri, Swarooph

    2012-10-19T23:59:59.000Z

    on a 3-ton residential air conditioner are then presented to intuitively understand the effect of expansion valve and evaporator fan cycling in a real system. A real time optimization method is explored and the feasibility, recommendations for a...

  16. Fuel cycle code, "FUELMOVE III"

    E-Print Network [OSTI]

    Sovka, Jerry Alois

    1963-01-01T23:59:59.000Z

    Further modifications to the fuel cycle code FUELMOVE are described which were made in an attempt to obtain results for reflected reactors operated under batch, outin, and bidirectional fueling schemes. Numerical methods ...

  17. The FIT 2.0 Model - Fuel-cycle Integration and Tradeoffs

    SciTech Connect (OSTI)

    Steven J. Piet; Nick R. Soelberg; Layne F. Pincock; Eric L. Shaber; Gregory M Teske

    2011-06-01T23:59:59.000Z

    All mass streams from fuel separation and fabrication are products that must meet some set of product criteria – fuel feedstock impurity limits, waste acceptance criteria (WAC), material storage (if any), or recycle material purity requirements such as zirconium for cladding or lanthanides for industrial use. These must be considered in a systematic and comprehensive way. The FIT model and the “system losses study” team that developed it [Shropshire2009, Piet2010b] are steps by the Fuel Cycle Technology program toward an analysis that accounts for the requirements and capabilities of each fuel cycle component, as well as major material flows within an integrated fuel cycle. This will help the program identify near-term R&D needs and set longer-term goals. This report describes FIT 2, an update of the original FIT model.[Piet2010c] FIT is a method to analyze different fuel cycles; in particular, to determine how changes in one part of a fuel cycle (say, fuel burnup, cooling, or separation efficiencies) chemically affect other parts of the fuel cycle. FIT provides the following: Rough estimate of physics and mass balance feasibility of combinations of technologies. If feasibility is an issue, it provides an estimate of how performance would have to change to achieve feasibility. Estimate of impurities in fuel and impurities in waste as function of separation performance, fuel fabrication, reactor, uranium source, etc.

  18. Vol. 16, No. 2 May 2006Global Energy and Water Cycle Experiment World Climate Research Programme

    E-Print Network [OSTI]

    's climate system is an energy cycle that converts absorbed solar radiation into heat and associated, its rapid rotation, and its elliptical orbit about the sun, the solar heating is neither uniform nor ARE A NET SINK OF ENERGY Left panel shows zonal, seasonal average generation of available potential energy

  19. Spatiotemporal shaping of half-cycle terahertz pulses by diffraction through

    E-Print Network [OSTI]

    Stroud, Carlos R.

    demonstrate a simple quasi-optical technique for spatiotemporal shaping of half-cycle terahertz-radiation (such as GaAs, InP, or CdTe) or radiation-damaged silicon-on-sapphire. Generated carri- ers are rapidly of finite thickness Jake Bromage, Stojan Radic, G. P. Agrawal, and C. R. Stroud, Jr. The Institute of Optics

  20. M. Bahrami ENSC 461 (S 11) Stirling Cycle 1 Stirling Cycle

    E-Print Network [OSTI]

    Bahrami, Majid

    M. Bahrami ENSC 461 (S 11) Stirling Cycle 1 Stirling Cycle In Stirling cycle, Carnot cycle). The regenerator is assumed to be reversible heat transfer device. Fig. 3-2: T-s and P-v diagrams for Stirling The Stirling cycle was invented by Robert Stirling in 1816. The execution of the Stirling cycle requires

  1. Economics of Organic Rankine Cycle

    E-Print Network [OSTI]

    O'Brien, W. J.

    Flow Diagram of Rankine Cycle the power recovery. Thus, mechanical simplicity, good efficiency, small size and an inherent reliability make the Organic Rankine Cycle particularly suitable for extraction of power from low temperature waste heat... for recovering waste heat. Based on the waste heat temperature, electricity cost and quantity of heat available, Figure 3 can be used to determine whether a potential project has greater than 20% DCF (discounted cash flow) return (above the line) or less...

  2. OSPREY Model Development Status Update

    SciTech Connect (OSTI)

    Veronica J Rutledge

    2014-04-01T23:59:59.000Z

    During the processing of used nuclear fuel, volatile radionuclides will be discharged to the atmosphere if no recovery processes are in place to limit their release. The volatile radionuclides of concern are 3H, 14C, 85Kr, and 129I. Methods are being developed, via adsorption and absorption unit operations, to capture these radionuclides. It is necessary to model these unit operations to aid in the evaluation of technologies and in the future development of an advanced used nuclear fuel processing plant. A collaboration between Fuel Cycle Research and Development Offgas Sigma Team member INL and a NEUP grant including ORNL, Syracuse University, and Georgia Institute of Technology has been formed to develop off gas models and support off gas research. Georgia Institute of Technology is developing fundamental level model to describe the equilibrium and kinetics of the adsorption process, which are to be integrated with OSPREY. This report discusses the progress made on expanding OSPREY to be multiple component and the integration of macroscale and microscale level models. Also included in this report is a brief OSPREY user guide.

  3. Soft evidential update for probabilistic multiagent systems

    E-Print Network [OSTI]

    Valtorta, Marco

    Soft evidential update for probabilistic multiagent systems Marco Valtorta a,* , Young-Gyun Kim. We give methodological guidance to model soft evidence in the form of beliefs (marginals) on single represented by a Bayesian network upon presentation of soft evidence. Our motivation is the desire to let

  4. Facebook IPO updated valuation and user forecasting

    E-Print Network [OSTI]

    Facebook IPO ­ updated valuation and user forecasting Based on: Amendment No. 6 to Form S-1 (May 9. Peter Cauwels and Didier Sornette, Quis pendit ipsa pretia: facebook valuation and diagnostic Extreme Growth JPMPaper Cauwels and Sornette 840 1110 1820 S1- filing- May 9 2012 1006 1105 1371 Facebook

  5. Updated 7-12 Patricia C. Adams

    E-Print Network [OSTI]

    Updated 7-12 Patricia C. Adams Deputy Assistant Secretary of the Navy (Civilian Human Resources) Ms. Adams is the senior advisor to the Under Secretary of the Navy and the Assistant Secretary of the Navy the Department of the Navy (DON) in June 2003, Ms. Adams has been directly involved in implementing the Secretary

  6. Updated 12-09 Marc Magdinec

    E-Print Network [OSTI]

    Updated 12-09 Marc Magdinec Deputy Commander Navy Air and Missile Defense Command Mr. Marc Magdinec is the Deputy Commander, Navy Air and Missile Defense Command. NAMDC is the Navy's primary authority and lead and was responsible for all Navy Surface tasking within the Warfare Centers. Mr. Magdinec began his career

  7. Updated 2-11 Richard C. Voigt

    E-Print Network [OSTI]

    Updated 2-11 Richard C. Voigt Comptroller Commander, Navy Installations Command Mr. Voigt is the Comptroller for the Commander, Navy Installations Command (CNIC). CNIC is responsible oversight of all Navy of experience in Government Financial Management, 28 of them with the Department of the Navy. Immediately prior

  8. Updates 11/02/2013 DEANNA SCHULTZ

    E-Print Network [OSTI]

    Wu, Mingshen

    Updates 11/02/2013 DEANNA SCHULTZ Office location: 225B Comm Tech * Office phone: 715-232-5449 * Email: schultzdea@uwstout.edu EDUCATION Ph.D., Education (emphasis in Community College Leadership Dissertation Chair: Sam Stern M.A., Educational Technology (non-thesis), University of Northern Iowa, July 1999

  9. Graduate School of Education Assessment Update

    E-Print Network [OSTI]

    Graduate School of Education Assessment Update Preparing for Our Accreditation Visit 2009 GSE Faculty Retreat September 23, 2009 #12;Graduate School of Education Countdown to Accreditation Visit 38 days to go October 31­November 4 #12;Graduate School of Education It's been a busy summer July

  10. Site Code #282 Updated November 24, 2014

    E-Print Network [OSTI]

    Site Code #282 Updated November 24, 2014 Programs Offered at ODU Tri-Cities Higher Education Center) Dental Hygiene (MS) Education ­ Educational Leadership (MSEd) Education ­ Elementary Education ­ Initial Licensure PK-6 (MSEd) Education ­ Elementary Education ­ Library Science (MSEd) Education ­ Occupational

  11. FCEDS General Education Requirements (Updated 2013)

    E-Print Network [OSTI]

    Mayfield, John

    FCEDS General Education Requirements (Updated 2013) This proposal outlines a plan that would allow a transfer student to apply an Associate of Arts or Associate of Science degree to meet the General Education requirements of the Family and Consumer Sciences Education and Studies (FCEDS) curriculum. The required

  12. OSTEOPOROSIS UPDATE Heather Hofflich, D.O.

    E-Print Network [OSTI]

    Squire, Larry R.

    10/20/2011 1 OSTEOPOROSIS UPDATE 2011 Heather Hofflich, D.O. Assistant Clinical Professor of Medicine UCSD Introduction Osteoporosis FRAX Diagnosis/Secon dary Causes Therapies Controversies/B one Markers NOF Guidelines Osteoporosis: The Definition · Impaired bone strength ­ Low BMD ­ poor bone quality

  13. Updated May 2014 Computer Engineering Sample Curriculum

    E-Print Network [OSTI]

    Subramanian, Venkat

    if student did not complete a social science course at the 300-400 or junior/senior level at their homeUpdated May 2014 Computer Engineering Sample Curriculum *Engineering Professional Practice required Differential Equations Math 217 3 General Physics I, II Physics 117A, 118A 4 4 General Chemistry I Chem 111A 3

  14. Updated June 2013 Computer Engineering Sample Curriculum

    E-Print Network [OSTI]

    Subramanian, Venkat

    required if student did not complete 300-400 social science course at their home institution WU Course FallUpdated June 2013 Computer Engineering Sample Curriculum *Engineering Professional Practice General Physics I, II Physics 117A, 118A 4 4 General Chemistry I Chem 111A 3 General Chemistry Laboratory

  15. Updated 12-12 Michael R. Erk

    E-Print Network [OSTI]

    Updated 12-12 Michael R. Erk Deputy Program Executive Officer Unmanned Aviation PEO Unmanned Aviation and Strike Weapons (PEO(U&W)) Naval Air Systems Command In August 2010, Mr. Erk assumed duties Aviation and Strike Weapons (PEO(U&W)). As the Deputy PEO for Unmanned Aviation, Mr. Erk is responsible

  16. Assessment Update 2009 Prepared: July 27, 2009

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    1 Assessment Update 2009 Prepared: July 27, 2009 CHBE assessment activities during AY 2008 Thresholds Details of Assessment Activities Inputs Assessment Threshold Response Review The Faculty tightened) Safety in Senior Design Reports: I viewed the Coal Bed Methane Water Treatment Project and the Coal

  17. Updated 5-12 Dennis C. Thompson

    E-Print Network [OSTI]

    Updated 5-12 Dennis C. Thompson Executive Deputy, Training and Education Command Marine Corps Mr. Thompson is the Executive Deputy of Training and Education Command, Marine Corps Base Quantico, responsible Force. Mr. Thompson served nearly 30 years in the US Marine Corps in a wide range of command

  18. Pond Management Update Register by: October 16!!!

    E-Print Network [OSTI]

    Watson, Craig A.

    Pond Management Update Register by: October 16!!! Tri-County Extension Programming October 18, 2012 Bradford County FFA Farm 3165 N.W. 196th St. Starke, FL 32091 4:00 PM Registration 4:30 Hot Dog Dinner 5:00 Calculating Pond Dimensions Dr. Mike Davis, CED, Baker County 5:25 Water Quality Basil Bactawar, CED, Union

  19. Updated 1-12 Virginia R. Beall

    E-Print Network [OSTI]

    disciplines. In 1991, she became Deputy Director of the Space and Electronic Warfare (SEW)/Copernicus Systems worked for the Space and Naval Warfare Systems Command in both analytic and systems engineering of the Copernicus C4I architecture, a forerunner to Network Centric Warfare. #12;Updated 1-12 From 1975 to 1988, she

  20. Updated 10-13 Dr. Adam Razavian

    E-Print Network [OSTI]

    and Electronic Warfare major programs for the Surface Navy. Adam Razavian graduated from the UniversityUpdated 10-13 Dr. Adam Razavian TECHNICAL DIRECTOR, NAVAL SURFACE WARFARE CENTER, CRANE DIVISION assignment at Navy headquarters in 1998, serving as a Project Manager, he served as the Electronics Design

  1. LEAD at Unidata Status Update, April 2009

    E-Print Network [OSTI]

    LEAD at Unidata Status Update, April 2009 Mohan Ramamurthy The LEAD project is currently in the no-cost extension period and nearing the end of its period of performance as an NSF Large ITR award. LEAD has and networking to huge data sets, human decision making and complex virtual organizations ­ LEAD functionality

  2. LEAD at Unidata Status Update, October 2009

    E-Print Network [OSTI]

    LEAD at Unidata Status Update, October 2009 Mohan Ramamurthy The official period of performance for the LEAD project ended on 30 September 2009 after a one-year the no-cost extension period. The six year ITR computing and networking to huge data sets, human decision making and complex virtual organizations ­ LEAD

  3. Peconic River Update Environmental Protection Division

    E-Print Network [OSTI]

    Homes, Christopher C.

    largemouth bass from Donahue's Pond Fish age and Hg content · 5-year old brown bullhead from Area C had 0 · Fish 5-Year Review update and recommendations for changes to the Peconic River monitoring program · Sediment · Water · Fish 2 #12;Refresher - The Clean-up ROD Goals ­ Mercury in Sediment · Onsite ­ Average

  4. ECONOMICS TUTORS (Updated 09/30/14)

    E-Print Network [OSTI]

    Weston, Ken

    ECONOMICS TUTORS (Updated 09/30/14) 2014-2015 ACADEMIC YEAR This list of tutors is provided by the Economics Department for those students expressing a desire/need for tutoring. Those on the list have not been screened, but are graduate students in Economics who have indicated a willingness/ability to tutor

  5. Test Laboratory Instructions (Updated 2/12)

    E-Print Network [OSTI]

    Test Laboratory Instructions (Updated 2/12) In California, manufacturers of State- and federally Energy Commission (Energy Commission). This reported data must come from an approved test laboratory performing the test procedure prescribed by law for the appliance. These instructions will walk you through

  6. Update on BNL's Solar Energy Research Plans

    E-Print Network [OSTI]

    Homes, Christopher C.

    Update on BNL's Solar Energy Research Plans Presented to CAC by Bob Lofaro January 12, 2012 #12;2 First, BP Solar is going out of business, but this will not impact BNL's plans for solar energy research! BP Solar will meet all of its contractual commitments with regard to supporting BNL's solar energy

  7. Residential Lighting: Title 24 and Technology Update

    E-Print Network [OSTI]

    California at Davis, University of

    Residential Lighting: Title 24 and Technology Update Best practices in lighting design to comply with California's Title 24 energy code Kelly Cunningham, Outreach Director California Lighting Technology Center AS AN IMPLIED ENDORSEMENT. #12;INTRODUCTION California Lighting Technology Center, UC Davis To accelerate

  8. Updating Texas Energy Cost Containment Audit Reports

    E-Print Network [OSTI]

    Burke, T. E.; Heffington, W. M.

    1989-01-01T23:59:59.000Z

    moneys in a program known as LoanSTAR. Due to the time between the audits and availability of funds, update of the reports for current energy and equipment cost, and for accomplishment of projects was necessary. Audits in 1984 and 1986 identified total...

  9. Update on the Cost of Nuclear Power

    E-Print Network [OSTI]

    Parsons, John E.

    2009-01-01T23:59:59.000Z

    We update the cost of nuclear power as calculated in the MIT (2003) Future of Nuclear Power study. Our main focus is on the changing cost of construction of new plants. The MIT (2003) study provided useful data on the cost ...

  10. Updated: September 23, 2014 Majed Akhter

    E-Print Network [OSTI]

    Robeson, Scott M.

    , Pakistan). #12;2 Updated: September 23, 2014 RESEARCH PEER REVIEWED JOURNAL ARTICLES Published/In press, M. Infrastructure nation: Hydraulic regionalism and fractured state space in Pakistan. Under review and resubmitted, June 2014] In preparation Akhter, M. The long hydraulic partition of British India: Territory

  11. Updated 4-12 Kimberly Kesler

    E-Print Network [OSTI]

    Updated 4-12 Kimberly Kesler Director, Corporate Operations/ Command Information Officer (8) reporting to the Assistant Secretary of the Navy (Energy, Installations and Environment) within of the Navy in 1990 after several years of working in the private sector for the IBM Corporation. Her first

  12. NAWIPS Migration to AWIPS II Status Update

    E-Print Network [OSTI]

    by Raytheon ­ Delivered updates to address DRs for NSHARP ­ Next delivery of NC Perspective to RTS in November-SBN data into AWIPS II ­ Worked with Raytheon/SSMC to use the AWIPS firewall to transfer the data from the NCEP network to AWIPS using SCP · Worked with the National Centers, Raytheon and OST to get a 64-bit

  13. View update translation for XML Iovka Boneva

    E-Print Network [OSTI]

    to query XML documents. While some databases store data into traditional DBMS and use XML only for exporting information, more and more DBMS provide a XQuery en- gine. Storing data in XML format (the soC extends XQuery with an important feature present in all DBMS: the ability to update an XML

  14. View update translation for XML Iovka Boneva

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    . While some databases store data into traditional DBMS and use XML only for exporting information, more and more DBMS provide a XQuery en- gine. Storing data in XML format (the so called native XML databases with an important feature present in all DBMS: the ability to update an XML document. Another important feature

  15. ANNUAL ASSESSMENT REPORT STRATEGIC PLANNING UPDATE

    E-Print Network [OSTI]

    Gelfond, Michael

    Sciences. The Communication Studies undergraduate advisor promoted our department during University DaysANNUAL ASSESSMENT REPORT AND STRATEGIC PLANNING UPDATE Year: 2008 Area or Unit Name: COMMUNICATION of graduate program review of the graduate programs of Applied Professional Studies in the College of Human

  16. Energy 101: Wind Turbines - 2014 Update

    SciTech Connect (OSTI)

    None

    2014-05-06T23:59:59.000Z

    See how wind turbines generate clean electricity from the power of wind. The video highlights the basic principles at work in wind turbines, and illustrates how the various components work to capture and convert wind energy to electricity. This updated version also includes information on the Energy Department's efforts to advance offshore wind power. Offshore wind energy footage courtesy of Vestas.

  17. Updating Maryland's Sea-level Rise

    E-Print Network [OSTI]

    Ezer,Tal

    Updating Maryland's Sea-level Rise Projections Scientific and Technical Working Group Maryland Climate Change Commission June 26, 2013 #12;Sea-level Rise Expert Group Donald F. Boesch* , University-author of the National Assessment Scenarios report Author of paper(s) on recent sea-level rise ~ Author contributing

  18. Updated 8-13 John Meyers

    E-Print Network [OSTI]

    Updated 8-13 John Meyers Technical Director for the Naval Air Warfare Center Training Systems Division and Director for the Naval Air Systems Command Human Systems Department Mr. John Meyers currently civilian for training systems and the technical authority for human systems for Naval Aviation. Mr. Meyers

  19. Energy 101: Wind Turbines - 2014 Update

    ScienceCinema (OSTI)

    None

    2014-06-05T23:59:59.000Z

    See how wind turbines generate clean electricity from the power of wind. The video highlights the basic principles at work in wind turbines, and illustrates how the various components work to capture and convert wind energy to electricity. This updated version also includes information on the Energy Department's efforts to advance offshore wind power. Offshore wind energy footage courtesy of Vestas.

  20. Fact Sheet # 1 to future updates.

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Fact Sheet # 1 t to future updates. The StormTreat system is a unique stormwater treatment. The system includes sedimentation chambers and a biological filter capable of supporting wetland plants. The StormTreat system has the potential to provide enhanced treatment of stormwater compared to conventional

  1. Cycling operation of fossil plants

    SciTech Connect (OSTI)

    Devendorf, D.; Kulczycky, T.G. (Niagara Mohawk Power Corp., Syracuse, NY (USA))

    1991-05-01T23:59:59.000Z

    A necessity for many utilities today is the cycling of their fossil units. Fossil plants with their higher fuel costs are being converted to cycling operation to accommodate daily load swings and to decrease the overall system fuel costs. For a large oil-fired unit, such as Oswego Steam Station Unit 5, millions of dollars can be saved annually in fuel costs if the unit operates in a two-shift mode. However, there are also penalties attributable to cycling operation which are associated with availability and thermal performance. The objectives of Niagara Mohawk Power Corporation were to minimize the losses in availability and performance, and the degradation in the life of the equipment by incorporating certain cycling modifications into the unit. The objective of this project was to evaluate the effectiveness of three of these cycling modifications: (1) the superheater and turbine bypass (Hot Restart System), (2) the use of variable pressure operation, and (3) the full-flow condensate polishing system. To meet this objective, Unit 5 was tested using the cycling modifications, and a dynamic mathematical model of this unit was developed using the Modular Modeling System (MMS) Code from EPRI. This model was used to evaluate various operating modes and to assist in the assessment of operating procedures. 15 refs., 41 figs., 22 tabs.

  2. Optimization and Comparison of Direct and Indirect Supercritical Carbon Dioxide Power Plant Cycles for Nuclear Applications

    SciTech Connect (OSTI)

    Edwin A. Harvego; Michael G. McKellar

    2011-11-01T23:59:59.000Z

    There have been a number of studies involving the use of gases operating in the supercritical mode for power production and process heat applications. Supercritical carbon dioxide (CO2) is particularly attractive because it is capable of achieving relatively high power conversion cycle efficiencies in the temperature range between 550 C and 750 C. Therefore, it has the potential for use with any type of high-temperature nuclear reactor concept, assuming reactor core outlet temperatures of at least 550 C. The particular power cycle investigated in this paper is a supercritical CO2 Recompression Brayton Cycle. The CO2 Recompression Brayton Cycle can be used as either a direct or indirect power conversion cycle, depending on the reactor type and reactor outlet temperature. The advantage of this cycle when compared to the helium Brayton cycle is the lower required operating temperature; 550 C versus 850 C. However, the supercritical CO2 Recompression Brayton Cycle requires an operating pressure in the range of 20 MPa, which is considerably higher than the required helium Brayton cycle operating pressure of 8 MPa. This paper presents results of analyses performed using the UniSim process analyses software to evaluate the performance of both a direct and indirect supercritical CO2 Brayton Recompression cycle for different reactor outlet temperatures. The direct supercritical CO2 cycle transferred heat directly from a 600 MWt reactor to the supercritical CO2 working fluid supplied to the turbine generator at approximately 20 MPa. The indirect supercritical CO2 cycle assumed a helium-cooled Very High Temperature Reactor (VHTR), operating at a primary system pressure of approximately 7.0 MPa, delivered heat through an intermediate heat exchanger to the secondary indirect supercritical CO2 Brayton Recompression cycle, again operating at a pressure of about 20 MPa. For both the direct and indirect cycles, sensitivity calculations were performed for reactor outlet temperature between 550 C and 850 C. The UniSim models used realistic component parameters and operating conditions to model the complete reactor and power conversion systems. CO2 properties were evaluated, and the operating ranges of the cycles were adjusted to take advantage of the rapidly changing properties of CO2 near the critical point. The results of the analyses showed that, for the direct supercritical CO2 power cycle, thermal efficiencies in the range of 40 to 50% can be achieved. For the indirect supercritical CO2 power cycle, thermal efficiencies were approximately 10% lower than those obtained for the direct cycle over the same reactor outlet temperature range.

  3. Method and system to estimate variables in an integrated gasification combined cycle (IGCC) plant

    DOE Patents [OSTI]

    Kumar, Aditya; Shi, Ruijie; Dokucu, Mustafa

    2013-09-17T23:59:59.000Z

    System and method to estimate variables in an integrated gasification combined cycle (IGCC) plant are provided. The system includes a sensor suite to measure respective plant input and output variables. An extended Kalman filter (EKF) receives sensed plant input variables and includes a dynamic model to generate a plurality of plant state estimates and a covariance matrix for the state estimates. A preemptive-constraining processor is configured to preemptively constrain the state estimates and covariance matrix to be free of constraint violations. A measurement-correction processor may be configured to correct constrained state estimates and a constrained covariance matrix based on processing of sensed plant output variables. The measurement-correction processor is coupled to update the dynamic model with corrected state estimates and a corrected covariance matrix. The updated dynamic model may be configured to estimate values for at least one plant variable not originally sensed by the sensor suite.

  4. KIVA-Update June 2012

    SciTech Connect (OSTI)

    Carrington, David B [Los Alamos National Laboratory

    2012-06-07T23:59:59.000Z

    Development of a fractional step, a Predictor-Corrector Split (PCS), or what is often known as a projection method combining hp-adaptive system in a Finite Element Method (FEM) for combustion modeling has been achieved. This model will advance the accuracy and range of applicability of the KIVA combustion model and software used typically for internal combustion engine modeling. This abstract describes a PCS hp-adaptive FEM model for turbulent reactive flow spanning all velocity regimes and fluids that is being developed for the new KIVA combustion algorithm, particularly for internal combustion engines. The method and general solver is applicable to Newtonian and non- Newtonian fluids and also for incompressible solids, porous media, solidification modeling, and fluid structure interaction problems. The fuel injection and injector modeling could easily benefit from the capability of solving the fluid structure interaction problem in an injector, helping to understand cycle to cycle variation and cavitation. This is just one example where the new algorithm differs from the old, in addition to handling Conjugate Heat Transfer (CHT), although there a numerous features that makes the new system more robust and accurate. In these ways, the PCS hp-adaptive algorithm does not compete with commercial software packages, those often used in conjunction with the currently distributed KIVA codes for engine combustion modeling. In addition, choosing a local ALE method on immersed moving parts represented by overset grid that is 2nd order spatially accurate, allows for easy grid generation from CAD to fluid grid while also provide for robustness in handling any possible moving parts configuration without any code modifications. The combined methods employed produce a minimal amount of computational effort as compared to fully resolved grids at the same accuracy. We demonstrate the solver on benchmark problems for the all flow regimes as follows: (1) 2-D backward-facing step using h-adaption, (2) 2-D driven cavity, (3) 2-D natural convection in a differentially heat cavity with h-adaptation, (4) NACA 0012 airfoil in 2-D, (5) supersonic flows over compression ramps, (6) 2-D natural convection in a differentially heat cavity with hp-adaptation, (7) 3-D natural convection in a differentially heat sphere with hp-adaptation. In addition, we show the new moving parts algorithm for working for a 2-D piston; the immersed moving parts method also for valves and pistons, vanes, etc... The movement is performed using an overset grid method and is 2nd order accurate in space, and never produces a tangle grid, that is, robust system at any resolution and any parts configuration. We also show CHT for the currently distributed KIVA-4mpi software and some fairly automatic grid generation using Sandia's Cubit unstructured grid generator. A new electronic web-based manual for KIVA-4 has been developed as well.

  5. Rapid prototyping applications for manufacturing

    SciTech Connect (OSTI)

    Atwood, C.L.; Maguire, M.C.; Pardo, B.T.; Bryce, E.A. [Sandia National Labs., Albuquerque, NM (United States)

    1996-01-01T23:59:59.000Z

    Recent advances in stereolithography and selective laser sintering have had a significant impact on the overall quality of parts produced using these rapid prototyping processes. The development and implementation of 3D System`s QuickCast{sup TM} resin and software for building investment casting patterns have proven to be major steps toward fabricating highly accurate patterns with very good surface finishes. As participants in the Beta test program for QuickCast{sup TM} resin and software, we experienced a steep learning curve and were able to build accurate parts in a short period of time. It is now possible using this technology to produce highly accurate prototype parts as well as acceptable first article and small lot size production parts. We use the Selective Laser Sintering (SLS) process to fabricate prototype wax patterns for investment casting. DTM Corporation recently introduced the use of their polycarbonate material for fabricating investment casting patterns. The polycarbonate material is processed significantly faster with improved strength, dimensional stability, and without a support structure during the build process. Sandia is currently changing from investment casting wax to polycarbonate for the fabrication of investment casting patterns using the SLS process. This report will focus on our successes with these new materials from the standpoints of application, accuracy, surface finish, and post processing. Also presented will be examples of parts manufactured by these processes. 6 refs., 10 figs.

  6. High-speed thermal cycling system and method of use

    DOE Patents [OSTI]

    Hansen, A.D.A.; Jaklevic, J.M.

    1996-04-16T23:59:59.000Z

    A thermal cycling system and method of use are described. The thermal cycling system is based on the circulation of temperature-controlled water directly to the underside of thin-walled polycarbonate plates. The water flow is selected from a manifold fed by pumps from heated reservoirs. The plate wells are loaded with typically 15-20 microliters of reagent mix for the PCR process. Heat transfer through the thin polycarbonate is sufficiently rapid that the contents reach thermal equilibrium with the water in less than 15 seconds. Complete PCR amplification runs of 40 three-step cycles have been performed in as little as 14.5 minutes, with the results showing substantially enhanced specificity compared to conventional technology requiring run times in excess of 100 minutes. The plate clamping station is designed to be amenable to robotic loading and unloading of the system. It includes a heated lid, thus eliminating the need for mineral oil overlay of the reactants. The present system includes three or more plate holder stations, fed from common reservoirs but operating with independent switching cycles. The system can be modularly expanded. 13 figs.

  7. High-speed thermal cycling system and method of use

    DOE Patents [OSTI]

    Hansen, Anthony D. A. (Berkely, CA); Jaklevic, Joseph M. (Lafayette, CA)

    1996-01-01T23:59:59.000Z

    A thermal cycling system and method of use are described. The thermal cycling system is based on the-circulation of temperature-controlled water directly to the underside of thin-walled polycarbonate microtiter plates. The water flow is selected from a manifold fed by pumps from heated reservoirs. The plate wells are loaded with typically 15-20 .mu.l of reagent mix for the PCR process. Heat transfer through the thin polycarbonate is sufficiently rapid that the contents reach thermal equilibrium with the water in less than 15 seconds. Complete PCR amplification runs of 40 three-step cycles have been performed in as little as 14.5 minutes, with the results showing substantially enhanced specificity compared to conventional technology requiring run times in excess of 100 minutes. The plate clamping station is designed to be amenable to robotic loading and unloading of the system. It includes a heated lid, thus eliminating the need for mineral oil overlay of the reactants. The present system includes three or more plate holder stations, fed from common reservoirs but operating with independent switching cycles. The system can be modularly expanded.

  8. Neuropsychologia xxx (2005) xxxxxx Rapid publication

    E-Print Network [OSTI]

    Gabrieli, John

    2005-01-01T23:59:59.000Z

    Neuropsychologia xxx (2005) xxx­xxx Rapid publication Making sense of another mind: The role. Wexler / Neuropsychologia xxx (2005) xxx­xxx LaBar, Crupain, V

  9. A review of battery life-cycle analysis : state of knowledge and critical needs.

    SciTech Connect (OSTI)

    Sullivan, J. L.; Gaines, L.; Energy Systems

    2010-12-22T23:59:59.000Z

    A literature review and evaluation has been conducted on cradle-to-gate life-cycle inventory studies of lead-acid, nickel-cadmium, nickel-metal hydride, sodium-sulfur, and lithium-ion battery technologies. Data were sought that represent the production of battery constituent materials and battery manufacture and assembly. Life-cycle production data for many battery materials are available and usable, though some need updating. For the remaining battery materials, lifecycle data either are nonexistent or, in some cases, in need of updating. Although battery manufacturing processes have occasionally been well described, detailed quantitative information on energy and material flows is missing. For all but the lithium-ion batteries, enough constituent material production energy data are available to approximate material production energies for the batteries, though improved input data for some materials are needed. Due to the potential benefit of battery recycling and a scarcity of associated data, there is a critical need for life-cycle data on battery material recycling. Either on a per kilogram or per watt-hour capacity basis, lead-acid batteries have the lowest production energy, carbon dioxide emissions, and criteria pollutant emissions. Some process-related emissions are also reviewed in this report.

  10. NMSS handbook for decommissioning fuel cycle and materials licensees

    SciTech Connect (OSTI)

    Orlando, D.A.; Hogg, R.C.; Ramsey, K.M. [and others

    1997-03-01T23:59:59.000Z

    The US Nuclear Regulatory Commission amended its regulations to set forth the technical and financial criteria for decommissioning licensed nuclear facilities. These regulations were further amended to establish additional recordkeeping requirements for decommissioning; to establish timeframes and schedules for the decommissioning; and to clarify that financial assurance requirements must be in place during operations and updated when licensed operations cease. Reviews of the Site Decommissioning Management Plan (SDMP) program found that, while the NRC staff was overseeing the decommissioning program at nuclear facilities in a manner that was protective of public health and safety, progress in decommissioning many sites was slow. As a result NRC determined that formal written procedures should be developed to facilitate the timely decommissioning of licensed nuclear facilities. This handbook was developed to aid NRC staff in achieving this goal. It is intended to be used as a reference document to, and in conjunction with, NRC Inspection Manual Chapter (IMC) 2605, ``Decommissioning Inspection Program for Fuel Cycle and Materials Licensees.`` The policies and procedures discussed in this handbook should be used by NRC staff overseeing the decommissioning program at licensed fuel cycle and materials sites; formerly licensed sites for which the licenses were terminated; sites involving source, special nuclear, or byproduct material subject to NRC regulation for which a license was never issued; and sites in the NRC`s SDMP program. NRC staff overseeing the decommissioning program at nuclear reactor facilities subject to regulation under 10 CFR Part 50 are not required to use the procedures discussed in this handbook.

  11. Life-cycle Assessment of Semiconductors

    E-Print Network [OSTI]

    Boyd, Sarah B.

    2009-01-01T23:59:59.000Z

    Environmental Impacts . . . . . . . . . . . . . . . . . . . . . .Abatement Environmental impactLife-cycle Environmental Impacts . . . . . . . LCA of

  12. Life-cycle Assessment of Semiconductors

    E-Print Network [OSTI]

    Boyd, Sarah B.

    2009-01-01T23:59:59.000Z

    SemiconductorThe Semiconductor Industry: Size, Growth andSemiconductor Life-cycle Environmental Impacts . . . . . . .

  13. Net Energy Payback and CO{sub 2} Emissions from Three Midwestern Wind Farms: An Update

    SciTech Connect (OSTI)

    White, Scott W. [University of Kansas, Kansas Geological Survey (United States)], E-mail: whites@kgs.ku.edu

    2006-12-15T23:59:59.000Z

    This paper updates a life-cycle net energy analysis and carbon dioxide emissions analysis of three Midwestern utility-scale wind systems. Both the Energy Payback Ratio (EPR) and CO{sub 2} analysis results provide useful data for policy discussions regarding an efficient and low-carbon energy mix. The EPR is the amount of electrical energy produced for the lifetime of the power plant divided by the total amount of energy required to procure and transport the materials, build, operate, and decommission the power plants. The CO{sub 2} analysis for each power plant was calculated from the life-cycle energy input data.A previous study also analyzed coal and nuclear fission power plants. At the time of that study, two of the three wind systems had less than a full year of generation data to project the life-cycle energy production. This study updates the analysis of three wind systems with an additional four to eight years of operating data.The EPR for the utility-scale wind systems ranges from a low of 11 for a two-turbine system in Wisconsin to 28 for a 143-turbine system in southwestern Minnesota. The EPR is 11 for coal, 25 for fission with gas centrifuge enriched uranium and 7 for gaseous diffusion enriched uranium. The normalized CO{sub 2} emissions, in tonnes of CO{sub 2} per GW{sub e}h, ranges from 14 to 33 for the wind systems, 974 for coal, and 10 and 34 for nuclear fission using gas centrifuge and gaseous diffusion enriched uranium, respectively.

  14. Modeling the Nuclear Fuel Cycle

    SciTech Connect (OSTI)

    Jacob J. Jacobson; A. M. Yacout; G. E. Matthern; S. J. Piet; A. Moisseytsev

    2005-07-01T23:59:59.000Z

    The Advanced Fuel Cycle Initiative is developing a system dynamics model as part of their broad systems analysis of future nuclear energy in the United States. The model will be used to analyze and compare various proposed technology deployment scenarios. The model will also give a better understanding of the linkages between the various components of the nuclear fuel cycle that includes uranium resources, reactor number and mix, nuclear fuel type and waste management. Each of these components is tightly connected to the nuclear fuel cycle but usually analyzed in isolation of the other parts. This model will attempt to bridge these components into a single model for analysis. This work is part of a multi-national laboratory effort between Argonne National Laboratory, Idaho National Laboratory and United States Department of Energy. This paper summarizes the basics of the system dynamics model and looks at some results from the model.

  15. Hydrogen Pathways: Updated Cost, Well-to-Wheels Energy Use, and Emissions for the Current Technology Status of Ten Hydrogen Production, Delivery, and Distribution Scenarios

    SciTech Connect (OSTI)

    Ramsden, T.; Ruth, M.; Diakov, V.; Laffen, M.; Timbario, T. A.

    2013-03-01T23:59:59.000Z

    This report describes a life-cycle assessment conducted by the National Renewable Energy Laboratory (NREL) of 10 hydrogen production, delivery, dispensing, and use pathways that were evaluated for cost, energy use, and greenhouse gas (GHG) emissions. This evaluation updates and expands on a previous assessment of seven pathways conducted in 2009. This study summarizes key results, parameters, and sensitivities to those parameters for the 10 hydrogen pathways, reporting on the levelized cost of hydrogen in 2007 U.S. dollars as well as life-cycle well-to-wheels energy use and GHG emissions associated with the pathways.

  16. Simple ocean carbon cycle models

    SciTech Connect (OSTI)

    Caldeira, K. [Lawrence Livermore National Lab., CA (United States); Hoffert, M.I. [New York Univ., NY (United States). Dept. of Earth System Sciences; Siegenthaler, U. [Bern Univ. (Switzerland). Inst. fuer Physik

    1994-02-01T23:59:59.000Z

    Simple ocean carbon cycle models can be used to calculate the rate at which the oceans are likely to absorb CO{sub 2} from the atmosphere. For problems involving steady-state ocean circulation, well calibrated ocean models produce results that are very similar to results obtained using general circulation models. Hence, simple ocean carbon cycle models may be appropriate for use in studies in which the time or expense of running large scale general circulation models would be prohibitive. Simple ocean models have the advantage of being based on a small number of explicit assumptions. The simplicity of these ocean models facilitates the understanding of model results.

  17. SNMR pulse sequence phase cycling

    DOE Patents [OSTI]

    Walsh, David O; Grunewald, Elliot D

    2013-11-12T23:59:59.000Z

    Technologies applicable to SNMR pulse sequence phase cycling are disclosed, including SNMR acquisition apparatus and methods, SNMR processing apparatus and methods, and combinations thereof. SNMR acquisition may include transmitting two or more SNMR pulse sequences and applying a phase shift to a pulse in at least one of the pulse sequences, according to any of a variety cycling techniques. SNMR processing may include combining SNMR from a plurality of pulse sequences comprising pulses of different phases, so that desired signals are preserved and indesired signals are canceled.

  18. Advanced Nuclear Fuel Cycle Options

    SciTech Connect (OSTI)

    Roald Wigeland; Temitope Taiwo; Michael Todosow; William Halsey; Jess Gehin

    2010-06-01T23:59:59.000Z

    A systematic evaluation has been conducted of the potential for advanced nuclear fuel cycle strategies and options to address the issues ascribed to the use of nuclear power. Issues included nuclear waste management, proliferation risk, safety, security, economics and affordability, and sustainability. The two basic strategies, once-through and recycle, and the range of possibilities within each strategy, are considered for all aspects of the fuel cycle including options for nuclear material irradiation, separations if needed, and disposal. Options range from incremental changes to today’s implementation to revolutionary concepts that would require the development of advanced nuclear technologies.

  19. State Energy Price System: 1982 update

    SciTech Connect (OSTI)

    Imhoff, K.L.; Fang, J.M.

    1984-10-01T23:59:59.000Z

    The State Energy Price System (STEPS) contains estimates of energy prices for ten major fuels (electricity, natural gas, metallurgical coal, steam coal, distillate, motor gasoline, diesel, kerosene/jet fuel, residual fuel, and liquefied petroleum gas), by major end-use sectors (residential, commercial, industrial, transportation, and electric utility), and by state through 1982. Both physical unit prices and prices per million Btu are included in STEPS. Major changes in STEPS data base for 1981 and 1982 are described. The most significant changes in procedures for the updates occur in the residential sector distillate series and the residential sector kerosene series. All physical unit and Btu prices are shown with three significant digits instead of with four significant digits as shown in the original documentation. Details of these and other changes are contained in this report, along with the updated data files. 31 references, 65 tables.

  20. Update of axion CDM energy density

    SciTech Connect (OSTI)

    Huh, Ji-Haeng [Department of Physics and Astronomy and Center for Theoretical Physics, Seoul National University, Seoul 151-747 (Korea, Republic of)

    2008-11-23T23:59:59.000Z

    We update cosmological bound on axion model. The contribution from the anharmonic effect and the newly introduced initial overshoot correction are considered. We present an explicit formula for the axion relic density in terms of the QCD scale {lambda}{sub QCD}, the current quark masses m{sub q}'s and the Peccei-Quinn scale F{sub a}, including firstly introduced 1.85 factor which is from the initial overshoot.

  1. An Updated AP2 Beamline TURTLE Model

    SciTech Connect (OSTI)

    Gormley, M.; O'Day, S.

    1991-08-23T23:59:59.000Z

    This note describes a TURTLE model of the AP2 beamline. This model was created by D. Johnson and improved by J. Hangst. The authors of this note have made additional improvements which reflect recent element and magnet setting changes. The magnet characteristics measurements and survey data compiled to update the model will be presented. A printout of the actual TURTLE deck may be found in appendix A.

  2. Capacity fade of Sony 18650 cells cycled at elevated temperatures Part I. Cycling performance

    E-Print Network [OSTI]

    Popov, Branko N.

    Capacity fade of Sony 18650 cells cycled at elevated temperatures Part I. Cycling performance P of Sony 18650 Li-ion cells increases with increase in temperature. After 800 cycles, the cells cycled the capacity fade of commercial Li-ion cells cycled at high temperatures. We choose Sony 18650 cells with Li

  3. Edinburgh Research Explorer Money Cycles

    E-Print Network [OSTI]

    Millar, Andrew J.

    Andrew Clausen (University of Edinburgh) Carlo Strub (University of St. Gallen) Date September 2014)131 650 8361 http://edin.ac/16ja6A6 #12;Money Cycles* Andrew Clausen University of Edinburgh Carlo Strub Nakajima, Borghan Narajabad, Peter Norman, Stanislav Rabinovich, Xavier Ragot, Andrei Shevchenko, Robert

  4. Single-cycle nonlinear optics

    E-Print Network [OSTI]

    Goulielmakis, E.; Max-Planck-Institut fur Quantenoptik

    2008-01-01T23:59:59.000Z

    g l e - C y c l e Nonlinear Optics E. G o u l i e l m a k iSingle-Cycle Nonlinear Optics E. Goulielmakis *, M.D-85748 Garching. Center for X-Ray Optics, Lawrence Berkeley

  5. Rankine and Brayton Cycle Cogeneration for Glass Melting 

    E-Print Network [OSTI]

    Hnat, J. G.; Patten, J. S.; Sheth, P. R.

    1981-01-01T23:59:59.000Z

    Rankine cycle, b) an organic Rankine cycle, c) an indirectly heated positive pressure Brayton cycle and d) a directly heated subatmospheric Brayton cycle. For the specified flue gas temperatures considered, the organic Rankine cycle produced the most...

  6. Updated September 1, 2013 ?David Reide Corbett

    E-Print Network [OSTI]

    Corbett, D. Reide

    and Ecosystem Sciences, Dept. of Geology, Tulane University · Uranium cycling and sediment transport, and 137Cs, extraction of 239Pu from seawater, and hydrological studies of coastal regions; supervise

  7. Brayton Solvent Recovery Heat Pump Technology Update

    E-Print Network [OSTI]

    Enneking, J. C.

    The Brayton cycle technology was developed to reduce the temperature of gas streams containing solvents in order to condense and recover them. While the use of turbo compressor/expander machinery in conjunction with an energy recuperator...

  8. Prediction of future fifteen solar cycles

    E-Print Network [OSTI]

    K. M. Hiremath

    2007-04-11T23:59:59.000Z

    In the previous study (Hiremath 2006a), the solar cycle is modeled as a forced and damped harmonic oscillator and from all the 22 cycles (1755-1996), long-term amplitudes, frequencies, phases and decay factor are obtained. Using these physical parameters of the previous 22 solar cycles and by an {\\em autoregressive model}, we predict the amplitude and period of the future fifteen solar cycles. Predicted amplitude of the present solar cycle (23) matches very well with the observations. The period of the present cycle is found to be 11.73 years. With these encouraging results, we also predict the profiles of future 15 solar cycles. Important predictions are : (i) the period and amplitude of the cycle 24 are 9.34 years and 110 ($\\pm 11$), (ii) the period and amplitude of the cycle 25 are 12.49 years and 110 ($\\pm$ 11), (iii) during the cycles 26 (2030-2042 AD), 27 (2042-2054 AD), 34 (2118-2127 AD), 37 (2152-2163 AD) and 38 (2163-2176 AD), the sun might experience a very high sunspot activity, (iv) the sun might also experience a very low (around 60) sunspot activity during cycle 31 (2089-2100 AD) and, (v) length of the solar cycles vary from 8.65 yrs for the cycle 33 to maximum of 13.07 yrs for the cycle 35.

  9. Microsoft Word - Determination of Class to Update Ventilation...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Solutions LLC Original Signatures on File Determination of Class Modification Update Ventilation Language for Consistency Waste Isolation Pilot Plant Carlsbad, New Mexico Permit...

  10. Idaho Operations Office: American Recovery and Reinvestment Act Update

    ScienceCinema (OSTI)

    Provencher, Rick

    2012-06-14T23:59:59.000Z

    An update from Idaho National Laboratory, Rick Provencher addresses the progress that has been made due to the American Recovery and Reinvestment Act.

  11. WINDExchange Webinar: Small and Distributed Wind Turbine Update

    Office of Energy Efficiency and Renewable Energy (EERE)

    Save the date for this free webinar presenting an overview of recent news and updates pertaining to small and distributed wind turbines.

  12. Updating the Electric Grid: An Introduction to Non-Transmission...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the transmission system. Updating the Electric Grid: An Introduction to Non-Transmission Alternatives for Policymakers More Documents & Publications EAC Recommendations for DOE...

  13. Sandia National Laboratories Releases Updated Wind Plant Modeling...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Releases Updated Wind Plant Modeling Guidelines Revamped Simulation Tool to Power Up Wave Energy Development DOE's AVESTAR Center to Expand Research, Training Opportunities...

  14. Update on Modeling for Effective Diesel Engine Aftertreatment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Engine Aftertreatment Implementation - Master Plan, Status and Critical Needs Update on Modeling for Effective Diesel Engine Aftertreatment Implementation - Master Plan, Status...

  15. Update 6 to: A Dispersion Modeling Analysis of Downwash from...

    Broader source: Energy.gov (indexed) [DOE]

    Update 6 to: A Dispersion Modeling Analysis of Downwash from Mirant's Potomac River Power Plant Modeling Baseload Units 3,4,5 More Documents & Publications Attachment A: Modeling...

  16. Trends in Real Estate and Energy Efficiency -- Update on Program...

    Energy Savers [EERE]

    -- Update on Program Experience Better Buildings Residential Network Program Sustainability Peer Exchange Call Series: Trends in Real Estate and Energy Efficiency, Call...

  17. FEMP Offers Updated Training on the Guiding Principles for High...

    Broader source: Energy.gov (indexed) [DOE]

    Energy's Federal Energy Management Program (FEMP) presents an updated series of training courses focused on the Guiding Principles for Federal Leadership in High-Performance and...

  18. Update 4 to: A Dispersion Modeling Analysis of Downwash from...

    Office of Environmental Management (EM)

    Analysis of Downwash from Mirant's Potomac River Power Plant, Modeling Unit 4 Emissions at Maximum and Minimum Loads Update 4 to: A Dispersion Modeling Analysis of Downwash...

  19. Update 2 to: A Dispersion Modeling Analysis of Downwash from...

    Office of Environmental Management (EM)

    Analysis of Downwash from Mirant's Potomac River Power Plant, Modeling Unit 1 Emissions at Maximum and Minimum Loads Update 2 to: A Dispersion Modeling Analysis of Downwash...

  20. Updated Appendices to the Status of Environmental Management...

    Office of Environmental Management (EM)

    the Reduction of Environmental Risks and Challenges Posed by the Legacy of the Cold War Report to Congress Updated Appendices to the Status of Environmental Management...

  1. Federal Geothermal Research Program Update Fiscal Year 1995

    SciTech Connect (OSTI)

    None

    1996-03-01T23:59:59.000Z

    The DOE Geothermal Research Program Update reports contain a fair amount of technical detail and management information at the individual project level. DJE 2005

  2. Federal Geothermal Research Program Update Fiscal Year 1997

    SciTech Connect (OSTI)

    None

    1998-03-01T23:59:59.000Z

    The DOE Geothermal Research Program Update reports contain a fair amount of technical detail and management information at the individual project level. (DJE 2005)

  3. Heating Oil and Propane Update - Energy Information Administration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Petroleum Reports Heating Oil and Propane Update Weekly heating oil and propane prices are only collected during the heating season, which extends from October through March....

  4. Commercial PACE: Updates from the Field & New Resources for Design...

    Broader source: Energy.gov (indexed) [DOE]

    property assessed clean energy and financing commercial energy efficiency upgrades to commercial buildings. Commercial PACE: Updates from the Field & New Resources for Design...

  5. ams scale update: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Statistics 110, or above. The actual courses will vary Wolfe, Patrick J. 3 Greenhouse Energy Efficiency Update 9 am to 4 pm on Computer Technologies and Information Sciences...

  6. Update on Diesel Exhaust Emission Control Technology and Regulations...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Control Technology and Regulations Update on Diesel Exhaust Emission Control Technology and Regulations 2004 Diesel Engine Emissions Reduction (DEER) Conference Presentation:...

  7. Dermatology Grand Rounds "AJCC Melanoma Staging Update: Impact on Diagnostic

    E-Print Network [OSTI]

    Bar, Moshe

    Dermatology Grand Rounds "AJCC Melanoma Staging Update: Impact on Diagnostic Reporting in primary melanoma Explain the decision making process in offering sentinel lymph node mapping Date

  8. Update Invalid Reservation Points for Transmission Service Requests...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CommitteesTeams Customer Training Interconnection Notices Rates Standards of Conduct Tariff TF Web Based Training Update: Invalid Reservation Points for Transmission Service...

  9. Completion of BPAT Systems Update - October 16, 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CommitteesTeams Customer Training Interconnection Notices Rates Standards of Conduct Tariff TF Web Based Training Notice: Completion of BPAT Systems Update Posted Date: 1016...

  10. Reminder of BPAT Systems Update - October 16, 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CommitteesTeams Customer Training Interconnection Notices Rates Standards of Conduct Tariff TF Web Based Training Notice: Reminder of BPAT Systems Update Posted Date 10162014...

  11. Qualified Energy Conservation Bond (QECB) Update: New Guidance...

    Broader source: Energy.gov (indexed) [DOE]

    Lawrence Berkeley National Laboratory Qualified Energy Conservation Bond (QECB) Update: New Guidance from the U.S. Department of Treasury and the Internal Revenue Service...

  12. May 20, 2014 Klarman Hall Construction Project Update

    E-Print Network [OSTI]

    Davis, H. Floyd

    May 20, 2014 Klarman Hall Construction Project Update The Klarman Hall will sound. At this signal, construction personnel will clear pedestrians from

  13. Federal Geothermal Research Program Update Fiscal Year 1994

    SciTech Connect (OSTI)

    None

    1995-03-01T23:59:59.000Z

    The DOE Geothermal Research Program Update reports contain a fair amount of technical detail and management information at the individual project level. (DJE 2005)

  14. Federal Geothermal Research Program Update Fiscal Year 1996

    SciTech Connect (OSTI)

    None

    1997-03-01T23:59:59.000Z

    The DOE Geothermal Research Program Update reports contain a fair amount of technical detail and management information at the individual project level. (DJE 2005)

  15. Subject: BPA Post-2011 Energy Efficiency Review Update #5 - ...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    242014 Subject: BPA Post-2011 Energy Efficiency Review Update 5 - Information for Upcoming Workgroups and Meetings Dear CustomerStakeholder, Thank you to those who have been...

  16. Home Energy Score Program: Update and Overview for Potential...

    Energy Savers [EERE]

    Home Energy Score Update Webinar Slides Better Buildings Neighborhood Program Home Accomplishments History Better Buildings Partners Stories Interviews Videos Contact Us...

  17. Performance Assessment Updates for Waste Isolation Pilot Plant...

    Office of Environmental Management (EM)

    December 12, 2014 To view all the P&RA CoP 2014 Technical Exchange Meeting videos click here. Video Presentation Performance Assessment Updates for Waste Isolation...

  18. An Updated Assessement of Copper Wire Thefts from Electric Utilities...

    Office of Environmental Management (EM)

    from Electric Utilities - October 2010 An Updated Assessement of Copper Wire Thefts from Electric Utilities - October 2010 The U.S. Department of Energy (DOE), Office of...

  19. Multiple Input-Multiple Output Cycle-to-Cycle Control of Manufacturing Processes

    E-Print Network [OSTI]

    Rzepniewski, Adam K.

    Cycle-to-cycle control is a method for using feedback to improve product quality for processes that are inaccessible within a single processing cycle. This limitation stems from the impossibility or the prohibitively high ...

  20. Updated estimation of energy efficiencies of U.S. petroleum refineries.

    SciTech Connect (OSTI)

    Palou-Rivera, I.; Wang, M. Q. (Energy Systems)

    2010-12-08T23:59:59.000Z

    Evaluation of life-cycle (or well-to-wheels, WTW) energy and emission impacts of vehicle/fuel systems requires energy use (or energy efficiencies) of energy processing or conversion activities. In most such studies, petroleum fuels are included. Thus, determination of energy efficiencies of petroleum refineries becomes a necessary step for life-cycle analyses of vehicle/fuel systems. Petroleum refinery energy efficiencies can then be used to determine the total amount of process energy use for refinery operation. Furthermore, since refineries produce multiple products, allocation of energy use and emissions associated with petroleum refineries to various petroleum products is needed for WTW analysis of individual fuels such as gasoline and diesel. In particular, GREET, the life-cycle model developed at Argonne National Laboratory with DOE sponsorship, compares energy use and emissions of various transportation fuels including gasoline and diesel. Energy use in petroleum refineries is key components of well-to-pump (WTP) energy use and emissions of gasoline and diesel. In GREET, petroleum refinery overall energy efficiencies are used to determine petroleum product specific energy efficiencies. Argonne has developed petroleum refining efficiencies from LP simulations of petroleum refineries and EIA survey data of petroleum refineries up to 2006 (see Wang, 2008). This memo documents Argonne's most recent update of petroleum refining efficiencies.

  1. LIFE CYCLE INVENTORY ANALYSIS IN THE PRODUCTION OF METALS USED IN PHOTOVOLTAICS.

    SciTech Connect (OSTI)

    FTHENAKIS,V.M.; KIM, H.C.; WANG, W.

    2007-03-30T23:59:59.000Z

    Material flows and emissions in all the stages of production of zinc, copper, aluminum, cadmium, indium, germanium, gallium, selenium, tellurium, and molybdenum were investigated. These metals are used selectively in the manufacture of solar cells, and emission and energy factors in their production are used in the Life Cycle Analysis (LCA) of photovoltaics. Significant changes have occurred in the production and associated emissions for these metals over the last 10 years, which are not described in the LCA databases. Furthermore, emission and energy factors for several of the by-products of the base metal production were lacking. This report aims in updating the life-cycle inventories associated with the production of the base metals (Zn, Cu, Al, Mo) and in defining the emission and energy allocations for the minor metals (Cd, In, Ge, Se, Te and Ga) used in photovoltaics.

  2. Multi-cycle boiling water reactor fuel cycle optimization

    SciTech Connect (OSTI)

    Ottinger, K.; Maldonado, G.I. [University of Tennessee, 311 Pasqua Engineering Building, Knoxville, TN 37996-2300 (United States)

    2013-07-01T23:59:59.000Z

    In this work a new computer code, BWROPT (Boiling Water Reactor Optimization), is presented. BWROPT uses the Parallel Simulated Annealing (PSA) algorithm to solve the out-of-core optimization problem coupled with an in-core optimization that determines the optimum fuel loading pattern. However it uses a Haling power profile for the depletion instead of optimizing the operating strategy. The result of this optimization is the optimum new fuel inventory and the core loading pattern for the first cycle considered in the optimization. Several changes were made to the optimization algorithm with respect to other nuclear fuel cycle optimization codes that use PSA. Instead of using constant sampling probabilities for the solution perturbation types throughout the optimization as is usually done in PSA optimizations the sampling probabilities are varied to get a better solution and/or decrease runtime. The new fuel types available for use can be sorted into an array based on any number of parameters so that each parameter can be incremented or decremented, which allows for more precise fuel type selection compared to random sampling. Also, the results are sorted by the new fuel inventory of the first cycle for ease of comparing alternative solutions. (authors)

  3. Charged particle rapidity distributions at relativistic energies 

    E-Print Network [OSTI]

    Lin, ZW; Pal, S.; Ko, Che Ming; Li, Ba; Zhang, B.

    2001-01-01T23:59:59.000Z

    Using a multiphase transport model (AMPT), which includes both initial partonic and final hadronic interactions, we study the rapidity distributions of charged particles such as protons, antiprotons, pions, and kaons in heavy ion collisions at RHIC...

  4. WVU Personal Rapid Transit Benefit Cost Analysis

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    WVU Personal Rapid Transit Benefit Cost Analysis Morgantown, West Virginia Prepared For: West.......................................................................................... 15 Travel Time Value - Understanding Travel Time Costs................................................. 15 Travel Time Value - Understanding Travel Time Costs

  5. Large Power Transformers and the U.S. Electric Grid Report Update...

    Broader source: Energy.gov (indexed) [DOE]

    Reliability has released an update to its 2012 Large Power Transformers and the U.S. Electric Grid report. The new report includes updated information about global electrical...

  6. Carnot cycle for an oscillator

    E-Print Network [OSTI]

    Arnaud, J; Philippe, F

    2002-01-01T23:59:59.000Z

    Carnot established in 1824 that the efficiency of cyclic engines operating between a hot bath at absolute temperature Th and a cold bath at temperature Tc cannot exceed 1-Tc/Th. This result implies the existence of an entropy function S(U) with the property that d^2S/dU^2 less equal 0, where U denotes the average energy. Linear single-mode systems alternately in contact with hot and cold baths obey these principles. A specific expression of the work done per cycle by an oscillator is derived from a prescription established by Einstein in 1906: heat baths may exchange energy with oscillators at angular frequency omega only by amounts hbar *omega, where 2*pi*hbar denotes the Planck constant. Non-reversible cycles are illustrated. The paper is essentially self-contained.

  7. Single-cycle nonlinear optics

    SciTech Connect (OSTI)

    Max-Planck-Institut fur Quantenoptik; Goulielmakis, E.; Schultze, M.; Hofstetter, M.; Yakovlev, V. S.; Gagnon, J.; Uiberacker, M.; Aquila, A. L.; gullikson, E. M.; attwood, D. T.; Kienberger, R.; Krausz, F.; Kleineberg, U.

    2008-11-05T23:59:59.000Z

    Nonlinear optics plays a central role in the advancement of optical science and laser-based technologies. We report on the confinement of the nonlinear interaction of light with matter to a single wave cycle and demonstrate its utility for time-resolved and strong-field science. The electric field of 3.3-femtosecond, 0.72-micron laser pulses with a controlled and measured waveform ionizes atoms near the crests of the central wave cycle, with ionization being virtually switched off outside this interval. Isolated sub-100-attosecond pulses of extreme ultraviolet light (photon energy {approx} 80 electron volts), containing {approx} 0.5 nanojoule of energy, emerge from the interaction with a conversion efficiency of {approx} 10{sup -6}. These tools enable the study of the precision control of electron motion with light fields and electron-electron interactions with a resolution approaching the atomic unit of time ({approx} 24 attoseconds).

  8. Profit cycle dynamics by Kawika Pierson.

    E-Print Network [OSTI]

    Pierson, Kawika (Kawika Paul)

    2011-01-01T23:59:59.000Z

    My thesis consists of three essays investigating the existence, causes, and mitigation of profit cycles at an industry level. The first essay examines profit cycles by proposing that the industry-specific features of how ...

  9. Rethinking the light water reactor fuel cycle

    E-Print Network [OSTI]

    Shwageraus, Evgeni, 1973-

    2004-01-01T23:59:59.000Z

    The once through nuclear fuel cycle adopted by the majority of countries with operating commercial power reactors imposes a number of concerns. The radioactive waste created in the once through nuclear fuel cycle has to ...

  10. Advanced Fuel Cycle Cost Basis

    SciTech Connect (OSTI)

    D. E. Shropshire; K. A. Williams; W. B. Boore; J. D. Smith; B. W. Dixon; M. Dunzik-Gougar; R. D. Adams; D. Gombert; E. Schneider

    2009-12-01T23:59:59.000Z

    This report, commissioned by the U.S. Department of Energy (DOE), provides a comprehensive set of cost data supporting a cost analysis for the relative economic comparison of options for use in the Advanced Fuel Cycle Initiative (AFCI) Program. The report describes the AFCI cost basis development process, reference information on AFCI cost modules, a procedure for estimating fuel cycle costs, economic evaluation guidelines, and a discussion on the integration of cost data into economic computer models. This report contains reference cost data for 25 cost modules—23 fuel cycle cost modules and 2 reactor modules. The cost modules were developed in the areas of natural uranium mining and milling, conversion, enrichment, depleted uranium disposition, fuel fabrication, interim spent fuel storage, reprocessing, waste conditioning, spent nuclear fuel (SNF) packaging, long-term monitored retrievable storage, near surface disposal of low-level waste (LLW), geologic repository and other disposal concepts, and transportation processes for nuclear fuel, LLW, SNF, transuranic, and high-level waste.

  11. Advanced Fuel Cycle Cost Basis

    SciTech Connect (OSTI)

    D. E. Shropshire; K. A. Williams; W. B. Boore; J. D. Smith; B. W. Dixon; M. Dunzik-Gougar; R. D. Adams; D. Gombert; E. Schneider

    2008-03-01T23:59:59.000Z

    This report, commissioned by the U.S. Department of Energy (DOE), provides a comprehensive set of cost data supporting a cost analysis for the relative economic comparison of options for use in the Advanced Fuel Cycle Initiative (AFCI) Program. The report describes the AFCI cost basis development process, reference information on AFCI cost modules, a procedure for estimating fuel cycle costs, economic evaluation guidelines, and a discussion on the integration of cost data into economic computer models. This report contains reference cost data for 25 cost modules—23 fuel cycle cost modules and 2 reactor modules. The cost modules were developed in the areas of natural uranium mining and milling, conversion, enrichment, depleted uranium disposition, fuel fabrication, interim spent fuel storage, reprocessing, waste conditioning, spent nuclear fuel (SNF) packaging, long-term monitored retrievable storage, near surface disposal of low-level waste (LLW), geologic repository and other disposal concepts, and transportation processes for nuclear fuel, LLW, SNF, transuranic, and high-level waste.

  12. Advanced Fuel Cycle Cost Basis

    SciTech Connect (OSTI)

    D. E. Shropshire; K. A. Williams; W. B. Boore; J. D. Smith; B. W. Dixon; M. Dunzik-Gougar; R. D. Adams; D. Gombert

    2007-04-01T23:59:59.000Z

    This report, commissioned by the U.S. Department of Energy (DOE), provides a comprehensive set of cost data supporting a cost analysis for the relative economic comparison of options for use in the Advanced Fuel Cycle Initiative (AFCI) Program. The report describes the AFCI cost basis development process, reference information on AFCI cost modules, a procedure for estimating fuel cycle costs, economic evaluation guidelines, and a discussion on the integration of cost data into economic computer models. This report contains reference cost data for 26 cost modules—24 fuel cycle cost modules and 2 reactor modules. The cost modules were developed in the areas of natural uranium mining and milling, conversion, enrichment, depleted uranium disposition, fuel fabrication, interim spent fuel storage, reprocessing, waste conditioning, spent nuclear fuel (SNF) packaging, long-term monitored retrievable storage, near surface disposal of low-level waste (LLW), geologic repository and other disposal concepts, and transportation processes for nuclear fuel, LLW, SNF, and high-level waste.

  13. Search for relationship between duration of the extended solar cycles and amplitude of sunspot cycle

    E-Print Network [OSTI]

    Tlatov, A G

    2007-01-01T23:59:59.000Z

    Duration of the extended solar cycles is taken into the consideration. The beginning of cycles is counted from the moment of polarity reversal of large-scale magnetic field in high latitudes, occurring in the sunspot cycle n till the minimum of the cycle n+2. The connection between cycle duration and its amplitude is established. Duration of the "latent" period of evolution of extended cycle between reversals and a minimum of the current sunspot cycle is entered. It is shown, that the latent period of cycles evolution is connected with the next sunspot cycle amplitude and can be used for the prognosis of a level and time of a sunspot maximum. The 24-th activity cycle prognosis is done. Long-term behavior of extended cycle's lengths is considered.

  14. Search for relationship between duration of the extended solar cycles and amplitude of sunspot cycle

    E-Print Network [OSTI]

    A. G. Tlatov

    2007-03-27T23:59:59.000Z

    Duration of the extended solar cycles is taken into the consideration. The beginning of cycles is counted from the moment of polarity reversal of large-scale magnetic field in high latitudes, occurring in the sunspot cycle n till the minimum of the cycle n+2. The connection between cycle duration and its amplitude is established. Duration of the "latent" period of evolution of extended cycle between reversals and a minimum of the current sunspot cycle is entered. It is shown, that the latent period of cycles evolution is connected with the next sunspot cycle amplitude and can be used for the prognosis of a level and time of a sunspot maximum. The 24-th activity cycle prognosis is done. Long-term behavior of extended cycle's lengths is considered.

  15. Updated Constraints on General Squark Flavor Mixing

    E-Print Network [OSTI]

    Arana-Catania, M; Herrero, M J

    2014-01-01T23:59:59.000Z

    We explore the phenomenological implications on non-minimal flavor violating (NMFV) processes from squark flavor mixing within the Minimal Supersymmetric Standard Model. We work under the model-independent hypothesis of general flavor mixing in the squark sector, being parametrized by a complete set of dimensionless delta^AB_ij (A,B = L, R; i,j = u, c, t or d, s, b) parameters. The present upper bounds on the most relevant NMFV processes, together with the requirement of compatibility in the choice of the MSSM parameters with the recent LHC and g-2 data, lead to updated constraints on all squark flavor mixing parameters.

  16. Standard Review Plan Update and Development Program

    SciTech Connect (OSTI)

    Not Available

    1992-05-01T23:59:59.000Z

    This implementing procedures document (IPD) was prepared for use in implementing tasks under the standard review plan update and development program (SRP-UDP). The IPD provides comprehensive guidance and detailed procedures for SRP-UDP tasks. The IPD is mandatory for contractors performing work for the SRP-UDP. It is guidance for the staff. At the completion of the SRP-UDP, the IPD will be revised (to remove the UDP aspects) and will replace NRR Office Letter No. 800 as long-term maintenance procedures.

  17. THE IDAHO NATIONAL LABORATORY BERYLLIUM TECHNOLOGY UPDATE

    SciTech Connect (OSTI)

    Glen R. Longhurst

    2007-12-01T23:59:59.000Z

    A Beryllium Technology Update meeting was held at the Idaho National Laboratory on July 18, 2007. Participants came from the U.S., Japan, and Russia. There were two main objectives of this meeting. One was a discussion of current technologies for beryllium in fission reactors, particularly the Advanced Test Reactor and the Japan Materials Test Reactor, and prospects for material availability in the coming years. The second objective of the meeting was a discussion of a project of the International Science and Technology Center regarding treatment of irradiated beryllium for disposal. This paper highlights discussions held during that meeting and major conclusions reached

  18. Updated U.S. Geothermal Supply Characterization

    SciTech Connect (OSTI)

    Petty, S.; Porro, G.

    2007-03-01T23:59:59.000Z

    This paper documents the approach taken to characterize and represent an updated assessment of U.S. geothermal supply for use in forecasting the penetration of geothermal electrical generation in the National Energy Modeling System (NEMS). This work is motivated by several factors: The supply characterization used as the basis of several recent U.S. Department of Energy (DOE) forecasts of geothermal capacity is outdated; additional geothermal resource assessments have been published; and a new costing tool that incorporates current technology, engineering practices, and associated costs has been released.

  19. Computer virus information update CIAC-2301

    SciTech Connect (OSTI)

    Orvis, W.J.

    1994-01-15T23:59:59.000Z

    While CIAC periodically issues bulletins about specific computer viruses, these bulletins do not cover all the computer viruses that affect desktop computers. The purpose of this document is to identify most of the known viruses for the MS-DOS and Macintosh platforms and give an overview of the effects of each virus. The authors also include information on some windows, Atari, and Amiga viruses. This document is revised periodically as new virus information becomes available. This document replaces all earlier versions of the CIAC Computer virus Information Update. The date on the front cover indicates date on which the information in this document was extracted from CIAC`s Virus database.

  20. win0203SelUpdates0203.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron4 Self-Scrubbing:,, ,Development1U CO1) 1 Winter Fuels Updated Feb 2003)

  1. win0203SelUpdates0303.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron4 Self-Scrubbing:,, ,Development1U CO1) 1 Winter Fuels Updated Feb

  2. UPDATE: Tropical Storm Isaac | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov. Are you sureReportsofDepartmentSeries | Department ofDepartmentChinaUPDATE: Tropical

  3. Subscribe to News Updates | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our InstagramStructure of All-Polymer. . ~0sFailureSubscribe to News Updates

  4. EM Program Update by Dr. Ines Triay

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy Chinaof EnergyImpact StatementDepartmentFront row,April 29,Program Update

  5. Qualified Energy Conservation Bond (QECB) Update: New

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of ContaminationHubs+18, 2012 Qualified Energy Conservation Bond (QECB) Update: New

  6. Development Plan for the Fuel Cycle Simulator

    SciTech Connect (OSTI)

    Brent Dixon

    2011-09-01T23:59:59.000Z

    The Fuel Cycle Simulator (FCS) project was initiated late in FY-10 as the activity to develop a next generation fuel cycle dynamic analysis tool for achieving the Systems Analysis Campaign 'Grand Challenge.' This challenge, as documented in the Campaign Implementation Plan, is to: 'Develop a fuel cycle simulator as part of a suite of tools to support decision-making, communication, and education, that synthesizes and visually explains the multiple attributes of potential fuel cycles.'

  7. The Aurora Calling Tree Updated May 14, 2010

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    The Aurora Calling Tree Updated May 14, 2010 1. If you see the Aurora first, call the next person Only circles. (However, if an early circle person happens to see the Aurora after 11:00, please CALL-529-7066 Norm Williams 406-579-1882 #12;The Aurora Calling Tree Updated May 14, 2010 1. If you see the Aurora

  8. Update procedures for the parallel revised simplex method

    E-Print Network [OSTI]

    Hall, Julian

    Update procedures for the parallel revised simplex method J. A. J. Hall and K. I. M. McKinnon 30th #12;Update procedures for the parallel revised simplex method J. A. J. Hall K. I. M. McKinnon 30th September 1992 Abstract In the parallel revised simplex method proposed by Hall et al. in 8], the inversion

  9. Texas Tech University Energy Savings Program July 2007 Update

    E-Print Network [OSTI]

    Gelfond, Michael

    Texas Tech University Energy Savings Program July 2007 Update The Texas Tech Energy Savings Update Performance Contract - $560,000 with a 6 year payback. c. Perform a minimum of 1 detailed energy audit per Agencies. Energy numbers come from the Energy Report filed with SECO semi-annually. Texas Tech may

  10. Texas Tech University Energy Savings Program April 2007 Update

    E-Print Network [OSTI]

    Gelfond, Michael

    Texas Tech University Energy Savings Program April 2007 Update The Texas Tech Energy Savings Update detailed energy audit per month beginning with the largest consumers of energy. 2. Fleet Management Agencies. Energy numbers come from the Energy Report filed with SECO semi-annually. Texas Tech is currently

  11. Texas Tech University Energy Savings Program April 2007 Update

    E-Print Network [OSTI]

    Zhuang, Yu

    Texas Tech University Energy Savings Program April 2007 Update The Texas Tech Energy Savings Update a minimum of 1 detailed energy audit per month beginning with the largest consumers of energy. 2. Fleet Agencies. Energy numbers come from the Energy Report filed with SECO semi-annually. Texas Tech is currently

  12. 1 Last updated: September 12, 2011 COUNCIL ON EDUCATIONAL POLICY

    E-Print Network [OSTI]

    Rose, Michael R.

    1 Last updated: September 12, 2011 COUNCIL ON EDUCATIONAL POLICY Guidelines for Approval of General;3 Last updated: September 12, 2011 II. GENERAL EDUCATION GUIDELINES The following guidelines are based Education Courses Approved May 2011 I. Executive summary of General Education Submission Procedures A) New

  13. Updated by Malana Bey 6/2013 Postbaccalaureate Research Education

    E-Print Network [OSTI]

    Yang, Sichun

    1 Updated by Malana Bey 6/2013 Postbaccalaureate Research Education Program (PREP) Scholar Handbook Education Program Office of Graduate Education, Ground floor TG-1 CWRU School of Medicine, 10900 Euclid://gradresed.meds.cwru.edu/PREP/index.html #12;2 Updated by Malana Bey 6/2013 Topic Table of Contents Page # Checklist ­ what to do when you

  14. Updated 2/26/14 International Degree & Education Abroad (IDEA)

    E-Print Network [OSTI]

    Escher, Christine

    Updated 2/26/14 International Degree & Education Abroad (IDEA) PreAdvising Form Name; Updated 2/26/14 Why do you want to participate in an education abroad experience? (Check all/duration:____________ All students planning to participate in an OSUapproved education abroad program (i.e. study

  15. Updated 5/8/14 International Degree & Education Abroad (IDEA)

    E-Print Network [OSTI]

    Escher, Christine

    Updated 5/8/14 International Degree & Education Abroad (IDEA) Pre-Advising Form Name students planning to participate in an OSU-approved education abroad program (i.e. study/research abroad- 4 pm) Moreland Hall (across from MU), Malamud Room (Mon. 10 am-2 pm & Fri. 10 am-3 pm) #12;Updated 5

  16. Software Safety Tutorial Status Update 1 Software Safety Tutorial

    E-Print Network [OSTI]

    Tian, Jeff

    Software Safety Tutorial Status Update 1 Software Safety Tutorial (Status Update) Jeff Tian, tian@engr.smu.edu CSE, SMU, Dallas, TX 75275 Topics · Project Overview · Software Safety Overview · Project Tasks competency for real-time software engineers. · Project team: Jeff Tian (SMU): Basics of SSE D.T. Huynh

  17. Data Update for Mt. Tom, Holyoke, MA August 2006

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Mt. Tom, Holyoke, MA August 2006 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Elkinton Monthly Data Summary for August 2006 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

  18. Data Update for Mt. Tom, Holyoke, MA Prepared for

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Mt. Tom, Holyoke, MA June 2005 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Ray Monthly Data Summary for June 2005 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59.2" N, 72

  19. Data Update for Mt. Tom, Holyoke, MA January 2006

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Mt. Tom, Holyoke, MA January 2006 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Ray Monthly Data Summary for December 2005 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

  20. Data Update for Mt. Tom, Holyoke, MA Prepared for

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Mt. Tom, Holyoke, MA May 2007 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for May 2007 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

  1. Data Update for Mt. Tom, Holyoke, MA October 2006

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Mt. Tom, Holyoke, MA October 2006 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Elkinton Monthly Data Summary for October 2006 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

  2. Data Update for Mt. Tom, Holyoke, MA Prepared for

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Mt. Tom, Holyoke, MA July 2007 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for July 2007 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

  3. Data Update for Mt. Tom, Holyoke, MA December 2005

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Mt. Tom, Holyoke, MA December 2005 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Ray Monthly Data Summary for December 2005 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

  4. Data Update for Mt. Tom, Holyoke, MA October 2005

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Mt. Tom, Holyoke, MA October 2005 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Ray Monthly Data Summary for October 2005 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

  5. Data Update for Mt. Tom, Holyoke, MA Prepared for

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Mt. Tom, Holyoke, MA July 2006 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Elkinton Monthly Data Summary for July 2006 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

  6. Data Update for Mt. Tom, Holyoke, MA Prepared for

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Mt. Tom, Holyoke, MA July 2005 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Ray Monthly Data Summary for July 2005 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59.2" N, 72

  7. Data Update for Mt. Tom, Holyoke, MA Prepared for

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Mt. Tom, Holyoke, MA March 2007 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for March 2007 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

  8. Data Update for Mt. Tom, Holyoke, MA Prepared for

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Mt. Tom, Holyoke, MA May 2006 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Ray Monthly Data Summary for May 2006 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59.2" N, 72

  9. Data Update for Mt. Tom, Holyoke, MA Prepared for

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Mt. Tom, Holyoke, MA April 2007 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for April 2007 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

  10. Data Update for Mt. Tom, Holyoke, MA October 2007

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Mt. Tom, Holyoke, MA October 2007 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for October 2007 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

  11. Data Update for Mt. Tom, Holyoke, MA November 2005

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Mt. Tom, Holyoke, MA November 2005 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Ray Monthly Data Summary for November 2005 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

  12. Data Update for Mt. Tom, Holyoke, MA January 2008

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Mt. Tom, Holyoke, MA January 2008 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for January 2008 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

  13. Data Update for Mt. Tom, Holyoke, MA Prepared for

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Mt. Tom, Holyoke, MA June 2007 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for June 2007 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

  14. Data Update for Mt. Tom, Holyoke, MA January 2007

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Mt. Tom, Holyoke, MA January 2007 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for January 2007 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

  15. Data Update for Mt. Tom, Holyoke, MA Prepared for

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Mt. Tom, Holyoke, MA April 2008 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for April 2008 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

  16. Data Update for Mt. Tom, Holyoke, MA Prepared for

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Mt. Tom, Holyoke, MA March 2008 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for March 2008 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

  17. Data Update for Mt. Tom, Holyoke, MA Prepared for

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Mt. Tom, Holyoke, MA June 2006 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Elkinton Monthly Data Summary for June 2006 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

  18. Data Update for Mt. Tom, Holyoke, MA November 2006

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Mt. Tom, Holyoke, MA November 2006 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Elkinton Monthly Data Summary for November 2006 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

  19. Data Update for Mt. Tom, Holyoke, MA February 2007

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Mt. Tom, Holyoke, MA February 2007 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for February 2007 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

  20. Data Update for Mt. Tom, Holyoke, MA Prepared for

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Mt. Tom, Holyoke, MA April 2006 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Ray Monthly Data Summary for April 2006 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59.2" N, 72

  1. Data Update for Mt. Tom, Holyoke, MA Prepared for

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Mt. Tom, Holyoke, MA March 2006 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Ray Monthly Data Summary for March 2006 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59.2" N, 72

  2. Data Update for Mt. Tom, Holyoke, MA August 2005

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Mt. Tom, Holyoke, MA August 2005 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Ray Monthly Data Summary for August 2005 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

  3. Data Update for Mt. Tom, Holyoke, MA Prepared for

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Mt. Tom, Holyoke, MA May 2008 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for May 2008 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

  4. Data Update for Mt. Tom, Holyoke, MA August 2007

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Mt. Tom, Holyoke, MA August 2007 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for August 2007 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

  5. Data Update for Thompson Island, Boston Harbor, MA August 2008

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Thompson Island, Boston Harbor, MA August 2008 Prepared for Massachusetts 2008 This update summarizes the monthly data results for the Thompson Island monitoring site in Boston this maintenance. Monthly Data Time Series Seen below is a graph of wind speed at Thompson Island for the month

  6. Data Update for Thompson Island, Boston Harbor, MA January 2008

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Thompson Island, Boston Harbor, MA January 2008 Prepared for Massachusetts for January 2008 This update summarizes the monthly data results for the Thompson Island monitoring site is a graph of wind speed at Thompson Island for the month of January 2008, at the highest anemometer height

  7. Data Update for Thompson Island, Boston Harbor, MA February 2007

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Thompson Island, Boston Harbor, MA February 2007 Prepared for Massachusetts for February 2007 This update summarizes the monthly data results for the Thompson Island monitoring site speed at Thompson Island for the month of February 2007, at the highest anemometer height of 40 m. #12;

  8. Data Update for Thompson Island, Boston Harbor, MA October 2007

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Thompson Island, Boston Harbor, MA October 2007 Prepared for Massachusetts for October 2007 This update summarizes the monthly data results for the Thompson Island monitoring site speed at Thompson Island for the month of October 2007, at the highest anemometer height of 40 m. #12;

  9. Data Update for Thompson Island, Boston Harbor, MA Prepared for

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Thompson Island, Boston Harbor, MA July 2006 Prepared for Massachusetts Technology This update summarizes the monthly data results for the Thompson Island monitoring site in Boston Harbor, MA the next service visit. Monthly Data Time Series Seen below is a graph of wind speed at Thompson Island

  10. Data Update for Thompson Island, Boston Harbor, MA November 2008

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Thompson Island, Boston Harbor, MA November 2008 Prepared for Massachusetts for November 2008 This update summarizes the monthly data results for the Thompson Island monitoring site is a graph of wind speed at Thompson Island for the month of November 2008, at the highest anemometer height

  11. Data Update for Thompson Island, Boston Harbor, MA November 2006

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Thompson Island, Boston Harbor, MA November 2006 Prepared for Massachusetts for November 2006 This update summarizes the monthly data results for the Thompson Island monitoring site speed at Thompson Island for the month of November 2006, at the highest anemometer height of 40 m

  12. Data Update for Thompson Island, Boston Harbor, MA Prepared for

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Thompson Island, Boston Harbor, MA March 2007 Prepared for Massachusetts Technology This update summarizes the monthly data results for the Thompson Island monitoring site in Boston Harbor, MA speed at Thompson Island for the month of March 2007, at the highest anemometer height of 40 m. #12;

  13. Data Update for Thompson Island, Boston Harbor, MA November 2007

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Thompson Island, Boston Harbor, MA November 2007 Prepared for Massachusetts for November 2007 This update summarizes the monthly data results for the Thompson Island monitoring site Data Time Series Seen below is a graph of wind speed at Thompson Island for the month of November 2007

  14. Data Update for Thompson Island, Boston Harbor, MA Prepared for

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Thompson Island, Boston Harbor, MA May 2006 Prepared for Massachusetts Technology This update summarizes the monthly data results for the Thompson Island monitoring site in Boston Harbor, MA the next site visit. · Monthly Data Time Series Seen below is a graph of wind speed at Thompson Island

  15. Data Update for Thompson Island, Boston Harbor, MA September 2005

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Thompson Island, Boston Harbor, MA September 2005 Prepared for Massachusetts for September 2005 This update summarizes the monthly data results for the Thompson Island monitoring site no maintenance issues to report. Monthly Data Time Series #12;Seen below is a graph of wind speed at Thompson

  16. Data Update for Thompson Island, Boston Harbor, MA Prepared for

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Thompson Island, Boston Harbor, MA March 2006 Prepared for Massachusetts Technology This update summarizes the monthly data results for the Thompson Island monitoring site in Boston Harbor, MA the spring of 2006. · Monthly Data Time Series Seen below is a graph of wind speed at Thompson Island

  17. Data Update for Thompson Island, Boston Harbor, MA December 2007

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Thompson Island, Boston Harbor, MA December 2007 Prepared for Massachusetts for December 2007 This update summarizes the monthly data results for the Thompson Island monitoring site. Monthly Data Time Series Seen below is a graph of wind speed at Thompson Island for the month of December

  18. Data Update for Thompson Island, Boston Harbor, MA January 2007

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Thompson Island, Boston Harbor, MA January 2007 Prepared for Massachusetts for January 2007 This update summarizes the monthly data results for the Thompson Island monitoring site speed at Thompson Island for the month of January 2007, at the highest anemometer height of 40 m. #12;

  19. Data Update for Thompson Island, Boston Harbor, MA Prepared for

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Thompson Island, Boston Harbor, MA April 2008 Prepared for Massachusetts Technology This update summarizes the monthly data results for the Thompson Island monitoring site in Boston Harbor, MA to this report if and when this happens. Monthly Data Time Series Seen below is a graph of wind speed at Thompson

  20. Data Update for Thompson Island, Boston Harbor, MA December 2008

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Data Update for Thompson Island, Boston Harbor, MA December 2008 Prepared for Massachusetts for December 2008 This update summarizes the monthly data results for the Thompson Island monitoring site is a graph of wind speed at Thompson Island for the month of December 2008, at the highest anemometer height