Powered by Deep Web Technologies
Note: This page contains sample records for the topic "radiance synthetic imaging" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Radiance: Synthetic Imaging System | Open Energy Information  

Open Energy Info (EERE)

Radiance: Synthetic Imaging System Radiance: Synthetic Imaging System Jump to: navigation, search Tool Summary Name: RADIANCE Agency/Company /Organization: Lawrence Berkeley National Laboratory Sector: Energy Focus Area: Buildings Resource Type: Software/modeling tools User Interface: Desktop Application Website: radsite.lbl.gov/radiance/ Cost: Free References: Radiance[1] Logo: RADIANCE RADIANCE is a highly accurate ray-tracing software system for UNIX computers that is licensed at no cost in source form. Radiance was developed with primary support from the U.S. Department Of Energy and additional support from the Swiss Federal Government. Radiance is a suite of programs for the analysis and visualization of lighting in design. Input files specify the scene geometry, materials, luminaires,time, date

2

Development of a GOES-R Advanced Baseline Imager Solar Channel Radiance Simulator for Ice Clouds  

Science Conference Proceedings (OSTI)

This paper describes the development of an ice cloud radiance simulator for the anticipated Geostationary Operational Environmental Satellite R (GOES-R) Advanced Baseline Imager (ABI) solar channels. The simulator is based on the discrete ...

Shouguo Ding; Ping Yang; Bryan A. Baum; Andrew Heidinger; Thomas Greenwald

2013-04-01T23:59:59.000Z

3

Evaluating Added Benefits of Assimilating GOES Imager Radiance Data in GSI for Coastal QPFs  

Science Conference Proceedings (OSTI)

The Geostationary Operational Environmental Satellites (GOES) provide high-resolution, temporally continuous imager radiance data over the West Coast (GOES-West currently known as GOES-11) and East Coast (GOES-East currently GOES-12) of the United ...

Zhengkun Qin; Xiaolei Zou; Fuzhong Weng

2013-01-01T23:59:59.000Z

4

Synthetic stereoscopic panoramic images  

Science Conference Proceedings (OSTI)

Presented here is a discussion of the techniques required to create stereoscopic panoramic images. Such images allow interactive exploration of 3D environments with stereoscopic depth cues. If projected in a surround display environment they can engage ...

Paul Bourke

2006-10-01T23:59:59.000Z

5

A Butterfly Algorithm for Synthetic Aperture Radar Imaging  

E-Print Network (OSTI)

In spite of an extensive literature on fast algorithms for synthetic aperture radar (SAR) imaging, it is not currently known if it is possible to accurately form an image from N data points in provable near-linear time ...

Demanet, Laurent

6

Development of a synthetic phase contrast imaging diagnostic  

E-Print Network (OSTI)

A “synthetic diagnostic” has been developed to calculate the expected experimental response of phase contrast imaging (PCI), a scattering diagnostic used to measure density fluctuations in laboratory plasmas, to a tokamak ...

Rost, Jon C.

7

Synthetic aperture design for increased SAR image rate  

DOE Patents (OSTI)

High resolution SAR images of a target scene at near video rates can be produced by using overlapped, but nevertheless, full-size synthetic apertures. The SAR images, which respectively correspond to the apertures, can be analyzed in sequence to permit detection of movement in the target scene.

Bielek, Timothy P. (Albuquerque, NM); Thompson, Douglas G. (Albuqerque, NM); Walker, Bruce C. (Albuquerque, NM)

2009-03-03T23:59:59.000Z

8

Update of Radiance Calibrations for ISCCP  

Science Conference Proceedings (OSTI)

Since July 1983 ISCCP has collected, normalized, and calibrated radiance data (visible and thermal infrared) from the imaging radiometers on the National Oceanic and Atmospheric Administration polar orbiters and from the geostationary satellites ...

Christopher L. Brest; William B. Rossow; Miriam D. Roiter

1997-10-01T23:59:59.000Z

9

Nadir Correction of AIRS Radiances  

Science Conference Proceedings (OSTI)

A statistical method to correct for the limb effect in off-nadir Atmospheric Infrared Sounder (AIRS) channel radiances is described, using the channel radiance itself and principal components (PCs) of the other channel radiances to account for ...

Chee-Kiat Teo; Tieh-Yong Koh

2010-03-01T23:59:59.000Z

10

radiance | OpenEI  

Open Energy Info (EERE)

radiance radiance Dataset Summary Description Freedom Field is a not-for-profit organization formed to facilitate development and commercialization of renewable energy solutions. The organization has installed a variety of renewable energy generating technologies at their facility (located at Rock River Water Reclamation in Rockford, IL), with the intention of serving as a demonstration facility. The facility monitors data (at 5-minute intervals) from a weather station, 12.4 kW of PV panels (56 220-watt panels), a 10kW wind turbine (HAWT), a 1.2 kW wind turbine (VAWT), an absorption cooling system, and biogas burners. Source Freedom Field Date Released July 19th, 2011 (3 years ago) Date Updated Unknown Keywords biogas monitoring data PV radiance solar temperature

11

Underwater Radiance Distributions Measured with Miniaturized Multispectral Radiance Cameras  

Science Conference Proceedings (OSTI)

Miniaturized radiance cameras measuring underwater multispectral radiances in all directions at high-radiometric accuracy (CE600) are presented. The camera design is described, as well as the main steps of its optical and radiometric ...

David Antoine; André Morel; Edouard Leymarie; Amel Houyou; Bernard Gentili; Stéphane Victori; Jean-Pierre Buis; Nicolas Buis; Sylvain Meunier; Marius Canini; Didier Crozel; Bertrand Fougnie; Patrice Henry

2013-01-01T23:59:59.000Z

12

Establishing the Moon as a Spectral Radiance Standard  

Science Conference Proceedings (OSTI)

A new automated observatory dedicated to the radiometry of the moon has been constructed to provide new radiance information for calibration of earth-orbiting imaging instruments, particularly Earth Observing System instruments. Instrumentation ...

Hugh H. Kieffer; Robert L. Wildey

1996-04-01T23:59:59.000Z

13

The underwater radiance distribution problem  

E-Print Network (OSTI)

THE UNDERWATER RADIANCE DISTRIBUTION PROBLEM S. Q. DuntleyFunction of Depth in an Underwater Environment," which firsta Function of Depth in an Underwater Environment," which has

Duntley, Seibert Q

1959-01-01T23:59:59.000Z

14

Three-dimensional image processing for synthetic holographic stereograms  

E-Print Network (OSTI)

A digital image processing technique is presented that allows conventionally produced images to be prepared for undistorted printing in one-step holographic stereograms. This technique effectively predistorts the source ...

Holzbach, Mark

1987-01-01T23:59:59.000Z

15

Basics of Polar-Format algorithm for processing Synthetic Aperture Radar images.  

Science Conference Proceedings (OSTI)

The purpose of this report is to provide a background to Synthetic Aperture Radar (SAR) image formation using the Polar Format (PFA) processing algorithm. This is meant to be an aid to those tasked to implement real-time image formation using the Polar Format processing algorithm.

Doerry, Armin Walter

2012-05-01T23:59:59.000Z

16

ARM - Measurement - Longwave spectral radiance  

NLE Websites -- All DOE Office Websites (Extended Search)

spectral radiance spectral radiance ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Longwave spectral radiance The rate at which the spectrally resolved radiant energy in the longwave portion of the spectrum is emitted in a particular direction per unit area perpendicular to the direction of radiation. Categories Radiometric Instruments The above measurement is considered scientifically relevant for the following instruments. Refer to the datastream (netcdf) file headers of each instrument for a list of all available measurements, including those recorded for diagnostic or quality assurance purposes. ARM Instruments AERI : Atmospheric Emitted Radiance Interferometer ASSIST : Atmospheric Sounder Spectrometer for Infrared Spectral

17

Radiance Covariance and Climate Models  

Science Conference Proceedings (OSTI)

Spectral empirical orthogonal functions (EOFs) derived from the covariance of satellite radiance spectra may be interpreted in terms of the vertical distribution of the covariance of temperature, water vapor, and clouds. This has been done for ...

Robert Haskins; Richard Goody; Luke Chen

1999-05-01T23:59:59.000Z

18

Validation of ERBS Scanner Radiances  

Science Conference Proceedings (OSTI)

The earth radiation budget satellite (ERBS) has made broadband scanner measurements of the earth radiance for over 5 years. The redundancy between the shortwave, longwave, and total scanning radiometers and data averages have been used to ...

Richard N. Green; Lee M. Avis

1996-08-01T23:59:59.000Z

19

Synthetic Aperture Radar -- Sandia National Laboratories  

NLE Websites -- All DOE Office Websites (Extended Search)

Information Contacts Synthetic Aperture Radar Sandia synthetic aperture radar image of Washington, DC Sandia synthetic aperture radar image of Washington, DC Sandia synthetic...

20

ARM - Measurement - Shortwave narrowband radiance  

NLE Websites -- All DOE Office Websites (Extended Search)

narrowband radiance narrowband radiance ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Shortwave narrowband radiance A measure of the intrinsic radiant energy flux intensity, at wavelengths between 0.4 and 4 {mu}, emitted by a radiator in a given direction, expressed in units of energy per unit time per unit solid angle. Categories Radiometric Instruments The above measurement is considered scientifically relevant for the following instruments. Refer to the datastream (netcdf) file headers of each instrument for a list of all available measurements, including those recorded for diagnostic or quality assurance purposes. ARM Instruments CSPHOT : Cimel Sunphotometer SWS : Shortwave Spectroradiometer

Note: This page contains sample records for the topic "radiance synthetic imaging" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Radiance Solar | Open Energy Information  

Open Energy Info (EERE)

Radiance Solar Radiance Solar Jump to: navigation, search Name Radiance Solar Place Atlanta, Georgia Zip 30318 Product Commercial and residential PV installer based in Atlanta. Coordinates 33.748315°, -84.391109° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":33.748315,"lon":-84.391109,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

22

A model for forming airborne synthetic aperture radar images of underground targets  

SciTech Connect

Synthetic Aperture Radar (SAR) from an airborne platform has been proposed for imaging targets beneath the earth`s surface. The propagation of the radar`s energy within the ground, however, is much different than in the earth`s atmosphere. The result is signal refraction, echo delay, propagation losses, dispersion, and volumetric scattering. These all combine to make SAR image formation from an airborne platform much more challenging than a surface imaging counterpart. This report treats the ground as a lossy dispersive half-space, and presents a model for the radar echo based on measurable parameters. The model is then used to explore various imaging schemes, and image properties. Dynamic range is discussed, as is the impact of loss on dynamic range. Modified window functions are proposed to mitigate effects of sidelobes of shallow targets overwhelming deeper targets.

Doerry, A.W.

1994-01-01T23:59:59.000Z

23

Normalization and Calibration of Geostationary Satellite Radiances for the international Satellite Cloud Climatology Project  

Science Conference Proceedings (OSTI)

Procedures are described for normalizing the radiometric calibration of image radiances obtained from the suite of geostationary weather satellites that contributed data to the international Satellite Cloud Climatology Project. The key step is ...

Yves Desormeaux; William B. Rossow; Christopher L. Brest; G. Garrett Campbell

1993-06-01T23:59:59.000Z

24

Using Sun Glint to Check the Relative Calibration of Reflected Spectral Radiances  

Science Conference Proceedings (OSTI)

Observations of sunlight reflected from regions of sun glint are used to check the relative calibration of spectral radiances obtained with imaging radiometers. Reflectances at different wavelengths for sun-glint regions are linearly related. ...

Gunnar Luderer; James A. Coakley Jr.; William R. Tahnk

2005-10-01T23:59:59.000Z

25

Direct Insertion of MODIS Radiances in a Global Aerosol Transport Model  

Science Conference Proceedings (OSTI)

In this paper results are presented from a simple offline assimilation system that uses radiances from the Moderate Resolution Imaging Spectroradiometer (MODIS) channels that sense atmospheric aerosols over land and ocean. The MODIS information ...

Clark Weaver; Arlindo da Silva; Mian Chin; Paul Ginoux; Oleg Dubovik; Dave Flittner; Aahmad Zia; Lorraine Remer; Brent Holben; Watson Gregg

2007-03-01T23:59:59.000Z

26

Building Energy Software Tools Directory: Radiance  

NLE Websites -- All DOE Office Websites (Extended Search)

Radiance Radiance Radiance logo. Advanced lighting simulation and rendering package; calculates spectral radiance values (illuminance & color) and spectral irradiance (illuminance & color) for interior and exterior spaces considering electric lighting, daylight and interreflection. Used by architects and designers to predict illumination, visual quality and appearance of design spaces. Used by researchers to evaluate new lighting and daylighting technologies and study visual comfort and similar quantities related to the visual environment. Keywords lighting, daylighting, rendering Validation/Testing N/A Expertise Required High level of computer literacy required; 4 days training, minimum. Users Over 200. Audience Daylighting, lighting, and architectural designers.

27

NIST Lunar spectral irradiance and radiance (LUSI)  

Science Conference Proceedings (OSTI)

... However, a spectrally resolved model that allows trending at the 0.1 % level ... of the lunar irradiance and radiance at reflected solar wavelengths. ...

2013-04-11T23:59:59.000Z

28

Global illumination with radiance regression functions  

Science Conference Proceedings (OSTI)

We present radiance regression functions for fast rendering of global illumination in scenes with dynamic local light sources. A radiance regression function (RRF) represents a non-linear mapping from local and contextual attributes of surface points, ... Keywords: global illumination, neural network, non-linear regression, real time rendering

Peiran Ren; Jiaping Wang; Minmin Gong; Stephen Lin; Xin Tong; Baining Guo

2013-07-01T23:59:59.000Z

29

Diagnosing Convective Instability from GOES-8 Radiances  

Science Conference Proceedings (OSTI)

Statistical algorithms are developed to diagnose the vertical change in equivalent potential temperature (??e) between 920 and 620 hPa from GOES-8 radiance data. The models are prepared using a training dataset of radiosonde releases from 10 ...

P. Anil Rao; Henry E. Fuelberg

1997-04-01T23:59:59.000Z

30

Infrared Radiance Modeling by Optimal Spectral Sampling  

Science Conference Proceedings (OSTI)

This paper describes a rapid and accurate technique for the numerical modeling of band transmittances and radiances in media with nonhomogeneous thermodynamic properties (i.e., temperature and pressure), containing a mixture of absorbing gases ...

Jean-Luc Moncet; Gennady Uymin; Alan E. Lipton; Hilary E. Snell

2008-12-01T23:59:59.000Z

31

A Parameterization of Broadband Conversion Factors for METEOSAT Visible Radiances  

Science Conference Proceedings (OSTI)

The conversion of radiances measured by the METEOSAT visible channel into broadband radiances can be performed as long as the appropriate conversion factors are known. A simple model allowing a spectral description of the optical properties of ...

J. Stum; B. Pinty; D. Ramond

1985-12-01T23:59:59.000Z

32

Atmospheric Emitted Radiance Interferometer. Part I: Instrument Design  

Science Conference Proceedings (OSTI)

A ground-based Fourier transform spectrometer has been developed to measure the atmospheric downwelling infrared radiance spectrum at the earth's surface with high absolute accuracy. The Atmospheric Emitted Radiance Interferometer (AERI) ...

R. O. Knuteson; H. E. Revercomb; F. A. Best; N. C. Ciganovich; R. G. Dedecker; T. P. Dirkx; S. C. Ellington; W. F. Feltz; R. K. Garcia; H. B. Howell; W. L. Smith; J. F. Short; D. C. Tobin

2004-12-01T23:59:59.000Z

33

Evaluation of a New Operational Technique for Producing Clear Radiances  

Science Conference Proceedings (OSTI)

To produce atmospheric temperature profiles from measurements of infrared data, it is necessary to obtain infrared radiances for clear areas. Clear radiances are obtained either by identifying spots that are completely clear or by extracting ...

L. M. McMillin; C. Dean

1982-07-01T23:59:59.000Z

34

Angular Distributions of Downward Longwave Radiance and Their Meteorological Applications  

Science Conference Proceedings (OSTI)

Measured thermal radiances (? > 3 ?m) from clear and cloudy skies are averaged over azimuth angles to obtain average sky radiances at various zenith angles. The observed variation of sky emissivity with zenith angle can be explained through the ...

Charles A. Coombes; Anthony W. Harrison

1986-08-01T23:59:59.000Z

35

Polarized radiance fields under a dynamic ocean surface: a three-dimensional radiative transfer solution  

Science Conference Proceedings (OSTI)

The hybrid matrix operator, Monte Carlo (HMOMC) method previously reported [Appl. Opt.47, 1063-1071 (2008)APOPAI0003-693510.1364/AO.47.001063] is improved by neglecting higher-order terms in the coupling of the matrix operators and by introducing a dual grid scheme. The computational efficiency for solving the vector radiative transfer equation in a full 3D coupled atmosphere-surface-ocean system is substantially improved, and, thus, large-scale simulations of the radiance distribution become feasible. The improved method is applied to the computation of the polarized radiance field under realistic surface waves simulated by the power spectral density method. To the authors' best knowledge, this is the first time that the polarized radiance field under a dynamic ocean surface and the underwater image of an object above such an ocean surface have been reported.

You Yu; Zhai Pengwang; Kattawar, George W.; Yang Ping

2009-06-01T23:59:59.000Z

36

Acceleration of Radiance for Lighting Simulation by using Parallel...  

NLE Websites -- All DOE Office Websites (Extended Search)

Conference Location Sydney, Australia Abstract This study attempted to accelerate annual daylighting simulations for fenestration systems in Radiance ray-tracing program. The...

37

Assessing Stability of CERES-FM3 Daytime Longwave Unfiltered Radiance with AIRS Radiances  

Science Conference Proceedings (OSTI)

Clouds and the Earth’s Radiant Energy System (CERES) daytime longwave (LW) radiances are determined from the difference between a total (TOT) channel (0.3–200 ?m) measurement and a shortwave (SW) channel (0.3–5 ?m) measurement, while nighttime LW ...

Xianglei Huang; Norman G. Loeb; Huiwen Chuang

2012-03-01T23:59:59.000Z

38

Three-dimensional subsurface imaging synthetic aperture radar (3D SISAR). Final report, September 22, 1993--September 22, 1996  

SciTech Connect

The concept developed under this applied research and development contract is a novel Ground Penetrating Radar system capable of remotely detecting, analyzing, and mapping buried waste containers from a mobile platform. From the testing and analysis performed to date, the 3-D SISAR has achieved the detection, accurate location, and three-dimensional imaging of buried test objects from a stand-off geometry. Tests have demonstrated that underground objects have been located to within 0.1 meter of their actual position. This work validates that the key elements of the approach are performing as anticipated. The stand-off synthetic aperture radar (SAR) methodology has been demonstrated to be a feasible approach as a remote sensing technique. The radar sensor constructed under this project is providing adequate quality data for imaging, and the matched filters have been demonstrated to provide enhanced target detection. Additional work is on-going in the area of underground propagation and scattering phenomena to provide enhanced depth performance, as the current imaging results have been limited to a few feet of depth underground.

NONE

1998-12-31T23:59:59.000Z

39

Very high radiance edge-emitting LED  

SciTech Connect

A new light-emitting diode (LED) whose radiance is 1000 W/cm/sup 2/sr, an order of magnitude higher than any previous LED, is described. The LED is an (AlGa)As double-heterojunction edge-emitting structure. This structure acts as a waveguide for the internally generated light, and with appropriate Al concentration difference at the heterojunctions (..delta..x approximately equal to 0.3) and active region width (approximately 500 A), the radiation pattern perpendicular to the junction can be less than 30/sup 0/ (FWHM). For fiber-optic communications this LED is capable of coupling 850 ..mu..w, at a coupling loss of only -10 dB into a 0.14-numerical-aperture (NA), 90-..mu..m-diam low-loss fiber. The LED is capable of being directly modulated at 250 MHz and has a spectral width of less than 300 A.

Ettenberg, M.; Kressel, H.; Wittke, J.P.

1976-06-01T23:59:59.000Z

40

Sensitivity Analysis of Cirrus Cloud Properties from High-Resolution Infrared Spectra. Part I: Methodology and Synthetic Cirrus  

Science Conference Proceedings (OSTI)

A set of simulated high-resolution infrared (IR) emission spectra of synthetic cirrus clouds is used to perform a sensitivity analysis of top-of-atmosphere (TOA) radiance to cloud parameters. Principal component analysis (PCA) is applied to ...

Brian H. Kahn; Annmarie Eldering; Michael Ghil; Simona Bordoni; Shepard A. Clough

2004-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "radiance synthetic imaging" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Absolute spectral radiance responsivity calibration of sun photometers  

SciTech Connect

Sun photometers are designed to measure direct solar irradiance and diffused sky radiance for the purpose of atmospheric parameters characterization. A sun photometer is usually calibrated by using a lamp-illuminated integrating sphere source for its band-averaged radiance responsivity, which normally has an uncertainty of 3%-5% at present. Considering the calibration coefficients may also change with time, a regular high precision calibration is important to maintain data quality. In this paper, a tunable-laser-based facility for spectral radiance responsivity calibration has been developed at the Key Laboratory of Optical Calibration and Characterization, Chinese Academy of Sciences. A reference standard radiance radiometer, calibrated against cryogenic radiometer, is used to determine the radiance from a laser-illuminated integrating sphere source. Spectral radiance responsivity of CIMEL CE318-2 sun photometer is calibrated using this new calibration system with a combined standard uncertainty of about 0.8%. As a validation, the derived band-averaged radiance responsivity are compared to that from a Goddard Space Flight Center lamp-based sphere calibration and good agreements (difference <1.4%) are found from 675 to 1020 nm bands.

Xu Qiuyun; Zheng Xiaobing; Zhang Wei; Wang Xianhua; Li Jianjun; Li Xin [Key Laboratory of Optical Calibration and Characterization, Chinese Academy of Sciences, Hefei 230031 (China); Li Zhengqiang [Laboratoire d'Optique Atmospherique, Universite Lille 1, Villeneuve d'Ascq 59655 (France) and State Key Laboratory of Remote Sensing Science, Institute of Remote Sensing Applications, Chinese Academy of Sciences, Beijing 100101 (China)

2010-03-15T23:59:59.000Z

42

The ARM Atmospheric Emitted Radiance Interferometer (AERI): Status and  

NLE Websites -- All DOE Office Websites (Extended Search)

The ARM Atmospheric Emitted Radiance Interferometer (AERI): Status and The ARM Atmospheric Emitted Radiance Interferometer (AERI): Status and Preliminary Assessments of Instrument Deployments in 2006 Dedecker, Ralph University of Wisconsin Demirgian, Jack Argonne National Laboratory Knuteson, Robert University Of Wisconsin Revercomb, Henry University of Wisconsin-Madison Tobin, David University of Wisconsin-Madison Turner, David University of Wisconsin-Madison Category: Instruments One of the key operational instruments at the Atmospheric Radiation Measurement Climate Research Facility (ACRF) is the Atmospheric Emitted Radiance Interferometer (AERI). This instrument provides the ARM program with surface-based observations of infrared spectrally resolved radiance from a vertically directed cone with better than 1% accuracy. The data from

43

Vertical Covariance Localization for Satellite Radiances in Ensemble Kalman Filters  

Science Conference Proceedings (OSTI)

A widely used observation space covariance localization method is shown to adversely affect satellite radiance assimilation in ensemble Kalman filters (EnKFs) when compared to model space covariance localization. The two principal problems are ...

William F. Campbell; Craig H. Bishop; Daniel Hodyss

2010-01-01T23:59:59.000Z

44

Global, Seasonal Surface Variations from Satellite Radiance Measurements  

Science Conference Proceedings (OSTI)

Global, daily, visible, and infrared radiance measurements from the NOAA-5 Scanning Radiometer (SR) are analyzed for the months of January, April, July, and October 1977 to infer surface radiative properties A radiative transfer model that ...

William B. Rossow; Christopher L. Brest; Leonid C. Garder

1989-03-01T23:59:59.000Z

45

Determination of Moisture From NOAA Polar Orbiting Satellite Sounding Radiances  

Science Conference Proceedings (OSTI)

A method is presented for deducing lower troposphere moisture fields from radiances measured by the operational polar orbiting NOAA satellites. Statistical evaluation of the technique demonstrates the viability of the approach. A case study with ...

Christopher M. Hayden; William L. Smith; Harold M. Woolf

1981-04-01T23:59:59.000Z

46

Radiance and Cloud Analyses from GOES-VAS Dwell Soundings  

Science Conference Proceedings (OSTI)

An analysis technique for Geostationary Operational Environmental Satellite-VISSR (Visible and Infrared Spin Scan Radiometer) Atmospheric Sounder (GOES-VAS) sounder data was developed to extract cloud and clear radiance information. This ...

Donald P. Wylie; Harold M. Woolf

2000-09-01T23:59:59.000Z

47

Determination of Total Ozone Amount from TIROS Radiance Measurements  

Science Conference Proceedings (OSTI)

Total ozone amounts are determined from atmospheric radiances measured by the TIROS Operational Vertical Sounder (TOVS). The retrieval procedure is one of linear regression where total ozone amounts derived from Dobson spectrophotometer ...

Walter G. Planet; David S. Crosby; James H. Lienesch; Michael L. Hill

1984-02-01T23:59:59.000Z

48

Acceleration of the matrix multiplication of Radiance three phase  

NLE Websites -- All DOE Office Websites (Extended Search)

Acceleration of the matrix multiplication of Radiance three phase Acceleration of the matrix multiplication of Radiance three phase daylighting simulations with parallel computing on heterogeneous hardware of personal computer Title Acceleration of the matrix multiplication of Radiance three phase daylighting simulations with parallel computing on heterogeneous hardware of personal computer Publication Type Journal Article LBNL Report Number LBNL-6461E Year of Publication 2013 Authors Zuo, Wangda, Andrew McNeil, Michael Wetter, and Eleanor S. Lee Journal Journal of Building Performance Simulation Keywords daylighting simulation, graphics processing unit, multicore central processing unit, OpenCL, parallel computing Abstract Building designers are increasingly relying on complex fenestration systems to reduce energy consumed for lighting and HVAC in low energy buildings. Radiance, a lighting simulation program, has been used to conduct daylighting simulations for complex fenestration systems. Depending on the configurations, the simulation can take hours or even days using a personal computer. This paper describes how to accelerate the matrix multiplication portion of a Radiance three-phase daylight simulation by conducting parallel computing on heterogeneous hardware of a personal computer. The algorithm was optimized and the computational part was implemented in parallel using OpenCL. The speed of new approach was evaluated using various daylighting simulation cases on a multicore central processing unit and a graphics processing unit. Based on the measurements and analysis of the time usage for the Radiance daylighting simulation, further speedups can be achieved by using fast I/O devices and storing the data in a binary format.

49

Comparing the Vertical Structures of Weighting Functions and Adjoint Sensitivity of Radiance and Verifying Mesoscale Forecasts Using AIRS Radiance Observations  

Science Conference Proceedings (OSTI)

An adjoint sensitivity analysis is conducted using the adjoint of the hyperspectral radiative transfer model (RTM) that simulates the radiance spectrum from the Advanced Infrared Sounder (AIRS). It is shown, both theoretically and numerically, ...

Matthew J. Carrier; Xiaolei Zou; William M. Lapenta

2008-04-01T23:59:59.000Z

50

Building Energy Software Tools Directory: Radiance  

NLE Websites -- All DOE Office Websites (Extended Search)

plots and contours, visual comfort levels, photograph-quality images and video animations. Computer Platform UNIX-compatible workstation, e.g. Sun, Silicon Graphics, Hewlett...

51

Solar Stray Light Effects in Meteosat Radiances Observed and Quantified Using Operational Data Monitoring at ECMWF  

Science Conference Proceedings (OSTI)

Radiances in the water vapor (WV) and infrared channels of the Meteorological Satellite (Meteosat)-5 and -7 are being continuously monitored in the form of clear-sky radiances using the operational European Centre for Medium-Range Weather ...

Christina Köpken

2004-01-01T23:59:59.000Z

52

An All-Weather Observational Operator for Radiance Data Assimilation with Mesoscale Forecast Models  

Science Conference Proceedings (OSTI)

Assimilating satellite radiance data under all weather conditions remains an outstanding problem in numerical weather prediction. This study develops an observational operator for use in radiance assimilation under both clear and cloudy ...

Thomas J. Greenwald; Rolf Hertenstein; Tomislava Vuki?evi?

2002-07-01T23:59:59.000Z

53

Determination of Unfiltered Radiances from the Clouds and the Earth’s Radiant Energy System Instrument  

Science Conference Proceedings (OSTI)

A new method for determining unfiltered shortwave (SW), longwave (LW), and window radiances from filtered radiances measured by the Clouds and the Earth’s Radiant Energy System (CERES) satellite instrument is presented. The method uses ...

Norman G. Loeb; Kory J. Priestley; David P. Kratz; Erika B. Geier; Richard N. Green; Bruce A. Wielicki; Patricia O’Rawe Hinton; Sandra K. Nolan

2001-04-01T23:59:59.000Z

54

Radiometric and Geometric Calibration of a Visible Spectral Electro-Optic “Fisheye” Camera Radiance Distribution System  

Science Conference Proceedings (OSTI)

Camera systems which measure a complete hemispherical field (“fisheye” lens systems), can be applied to the measurement of the radiance, but accurate radiometric and geometric calibrations are required to obtain absolute radiance data. The ...

Kenneth J. Voss; Giuseppe Zibordi

1989-08-01T23:59:59.000Z

55

Synthetic Aperture Radar Imagery -- Sandia National Laboratories  

NLE Websites -- All DOE Office Websites (Extended Search)

Synthetic Aperture Radar Imagery Sandia has collected and real-time processed over 400,000 synthetic aperture radar images. The following is a selection of imagery available for...

56

Time series analysis of AERI radiances for GCM testing and improvement  

NLE Websites -- All DOE Office Websites (Extended Search)

Time series analysis of AERI radiances for GCM testing and improvement Time series analysis of AERI radiances for GCM testing and improvement Dykema, John Harvard University Leroy, Stephen Harvard University Anderson, James Harvard University Tobin, David University of Wisconsin-Madison Knuteson, Robert University Of Wisconsin Revercomb, Henry University of Wisconsin-Madison Category: Radiation High resolution infrared radiances measured by the Atmospheric Emitted Radiance Interferometer (AERI) contained detailed information about the structure and dynamics of temperature, water vapor, and clouds below 3 km. Infrared radiances also contain the signature of radiative forcing by well-mixed gases that constitutes the greenhouse effect. Direct comparison of these radiance observations to similar radiances calculated from output

57

CIMEL Measurements of Zenith Radiances at the ARM SGP Site  

NLE Websites -- All DOE Office Websites (Extended Search)

CIMEL Measurements of Zenith Radiances CIMEL Measurements of Zenith Radiances at the ARM SGP Site W. J. Wiscombe National Aeronautics and Space Administration Goddard Space Flight Center Climate and Radiation Branch Greenbelt, Maryland A. Marshak and K. Evans Joint Center for Earth Systems Technology University of Maryland Baltimore, Maryland Y. Knyazikhin Department of Geography Boston University Boston, Massachusetts H. W. Barker Environment Canada Downsview, Ontario, Canada C. F. Pavloski Department of Meteorology Pennsylvania State University University Park, Pennsylvania A. B. Davis Los Alamos National Laboratory Space and Remote Sensing Sciences Los Alamos, New Mexico M. Miller Brookhaven National Laboratory Upton, New York Introduction The objective of our study is to exploit the sharp spectral contrast in vegetated surface reflectance across

58

Posters Atmospheric Emitted Radiance Interferometer Data Analysis Methods  

NLE Websites -- All DOE Office Websites (Extended Search)

Posters Atmospheric Emitted Radiance Interferometer Data Analysis Methods R. O. Knuteson, W. L. Smith, S. A. Ackerman, H. E. Revercomb, H. Woolf, and H. Howell Cooperative Institute for Meteorological Satellite Studies University of Wisconsin-Madison Madison, Wisconsin Introduction Data from the Atmospheric Emitted Radiance Inter- ferometer (AERI) have been analyzed for the Atmospheric Radiation Measurement (ARM) Program's Fourier Transform Data Analysis Tools science team project under the direction of William L. Smith of the University of Wisconsin-Madison. The data consist of observations of the downwelling infrared emission at the surface from gaseous atmospheric constituents and from cloud and particulate aerosols. The observations are at 0.5 cm-1 spectral resolution over the

59

ARM's Atmospheric Emitted Radiance Interferometer (AERI) Data  

DOE Data Explorer (OSTI)

The atmospheric emitted radiance interferometer (AERI) measures the absolute infrared spectral radiance (watts per square meter per steradian per wavenumber) of the sky directly above the instrument. The spectral measurement range of the instrument is 3300 to 520 wavenumbers (cm-1) or 3-19.2 microns for the normal-range instruments and 3300 to 400 cm-1 or 3-25 microns for the extended-range polar instruments. Spectral resolution is 1.0 cm-1. Instrument field-of-view is 1.3 degrees. A calibrated sky radiance spectrum is produced every 8 minutes in normal mode and every minute in rapid sampling mode. The actual sample scan time is 20-30 sec in rapid sampling mode with periodic gaps when the instrument is looking at the blackbodies. Rapid sampling will become available in all AERIs. Rapid sampling time will eventually be reduced to data every 20 seconds. The AERI data can be used for (1) evaluating line-by-line radiative transport codes, (2) detecting/quantifying cloud effects on ground-based measurements of infrared spectral radiance (and hence is valuable for cloud property retrievals), and (3) calculating vertical atmospheric profiles of temperature and water vapor and the detection of trace gases.[Copied from http://www.arm.gov/instruments/aeri]

The ARM Archive at Oak Ridge National Laboratory holds data collected from the AERI for three of the permanent ARM sites, North Slope Alaska (NSA), Southern Great Plains (SGP), and the Tropical Western Pacific (TWP), as well as from mobile facilities used during specific field campaigns. AERI data has been collected since 1995.

60

Synthetic Cells Shed Biological Insights While Delivering ...  

Science Conference Proceedings (OSTI)

Synthetic Cells Shed Biological Insights While Delivering Battery Power. ... Image of two artificial cells that can act as a tiny battery. ...

2012-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "radiance synthetic imaging" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Synthetic fuels  

Science Conference Proceedings (OSTI)

In January 1982, the Department of Energy guaranteed a loan for the construction and startup of the Great Plains project. On August 1, 1985, the partnership defaulted on the $1.54 billion loan, and DOE acquired control of, and then title to, the project. DOE continued to operate the plant, through the ANG Coal Gasification Company, and sell synthetic fuel. The DOE's ownership and divestiture of the plant is discussed.

Not Available

1989-01-01T23:59:59.000Z

62

GPU-based Calculation for Scattering Characteristics of Complex Targets from Background Radiance in Infrared Spectrum  

Science Conference Proceedings (OSTI)

Scattering characteristic of complex targets from sky and ground background radiance plays an important role in engineering fields. Firstly, a 5-parameter BRDF (Bidirectional Reflectance Distributional Function) model is introduced. Then MODTRAN is used ... Keywords: scattering characteristic, background radiance, BRDF, GPU, CUDA, optimization

Xing Guo, Zhensen Wu, Longxiang Linghu, Yufeng Yang, Yunhua Cao, Jiaji Wu

2012-12-01T23:59:59.000Z

63

Long-Term Trends in Downwelling Spectral Infrared Radiance over the U.S. Southern Great Plains  

Science Conference Proceedings (OSTI)

A trend analysis was applied to a 14-yr time series of downwelling spectral infrared radiance observations from the Atmospheric Emitted Radiance Interferometer (AERI) located at the Atmospheric Radiation Measurement Program (ARM) site in the U.S. ...

P. Jonathan Gero; David D. Turner

2011-09-01T23:59:59.000Z

64

Evaluation of a Strategy for the Assimilation of Satellite Radiance Observations with the Local Ensemble Transform Kalman Filter  

Science Conference Proceedings (OSTI)

This paper evaluates a strategy for the assimilation of satellite radiance observations with the local ensemble transform Kalman filter (LETKF) data assimilation scheme. The assimilation strategy includes a mechanism to select the radiance ...

José A. Aravéquia; Istvan Szunyogh; Elana J. Fertig; Eugenia Kalnay; David Kuhl; Eric J. Kostelich

2011-06-01T23:59:59.000Z

65

Meteorological Applications of Temperature and Water Vapor Retrievals from the Ground-Based Atmospheric Emitted Radiance Interferometer (AERI)  

Science Conference Proceedings (OSTI)

The Atmospheric Emitted Radiance Interferometer (AERI) is a well-calibrated ground-based instrument that measures high-resolution atmospheric emitted radiances from the atmosphere. The spectral resolution of the instrument is better than one ...

Wayne F. Feltz; William L. Smith; Robert O. Knuteson; Henry E. Revercomb; Harold M. Woolf; H. Ben Howell

1998-09-01T23:59:59.000Z

66

Precomputed local radiance transfer for real-time lighting design  

E-Print Network (OSTI)

This paper introduces a new method for real-time relighting of scenes illuminated by local light sources. We extend previous work on precomputed radiance transfer for distant lighting to local lighting by introducing the concept of unstructured light clouds. The unstructured light cloud enables a compact representation of local lights in the model and real-time rendering of complex models with full global illumination due to local light sources. We use simplification of lights, and clustered PCA to obtain a compressed representation. When storing only the indirect component of the illumination, we are able to get high quality with only 8– 16 lighting coefficients per vertex. Our results demonstrate real-time rendering of scenes with moving lights, dynamic cameras, glossy materials and global illumination.

Anders Wang Kristensen

2005-01-01T23:59:59.000Z

67

Synthetic Aperture Radar Interferometry  

E-Print Network (OSTI)

Synthetic aperture radar interferometry is an imaging technique for measuring the topography of a surface, its changes over time, and other changes in the detailed characteristics of the surface. By exploiting the phase of the coherent radar signal, interferometry has transformed radar remote sensing from a largely interpretive science to a quantitative tool, with applications in cartography, geodesy, land cover characterization, and natural hazards. This paper reviews the techniques of interferometry, systems and limitations, and applications in a rapidly growing area of science and engineering.

Paul A. Rosen; Scott Hensley; Ian R. Joughin; Fuk K. Li; Søren N. Madsen; Senior Member; Ernesto Rodríguez; Richard M. Goldstein

2000-01-01T23:59:59.000Z

68

Spotlight-Mode Synthetic Aperture Radar: A Signal Processing Approach  

Science Conference Proceedings (OSTI)

From the Publisher:Spotlight-mode Synthetic Aperture Radar: A Signal Processing Approach describes an important mode of synthetic aperture radar (SAR) imaging, known as spotlight-mode SAR. By treating the subject via the principles of signal processing, ...

Paul Thompson; Daniel E. Wahl; Paul H. Eichel; Dennis C. Ghiglia; Charles V. Jakowatz

1996-01-01T23:59:59.000Z

69

Super-radiance in the sodium resonance lines from sodium iodide arc lamps  

Science Conference Proceedings (OSTI)

Super-radiance observed within the centers of the sodium resonance D lines emitted by arc lamps containing sodium iodide as additive in a high-pressure mercury plasma environment was studied by high-resolution emission spectroscopy. The spectral radiance of these self-reversed lines including super-radiance was simulated by considering a local enhancement of the source function due to the presence of an additional source of radiation near the arc wall. Causes of this hitherto unrecognized source of radiation are given.

Karabourniotis, D. [Department of Physics, Institute of Plasma Physics, University of Crete, 71003 Heraklion (Greece); Drakakis, E. [Department of Electrical Engineering, Technological Educational Institute, Heraklion (Greece)

2010-08-09T23:59:59.000Z

70

Atmospheric Emitted Radiance Interferometer (AERI) Archived Data at the University of Wisconsin Space Science and Engineering Center (SSEC)  

DOE Data Explorer (OSTI)

The AERI instrument is an advanced version of the high spectral resolution interferometer sounder (HIS) designed and fabricated at the University of Wisconsin (Revercomb et al. 1988) to measure upwelling infrared radiances from an aircraft. The AERI is a fully automated ground-based passive infrared interferometer that measures downwelling atmospheric radiance from 3.3 - 18.2 mm (550 - 3000 cm-1) at less than 10-minute temporal resolution with a spectral resolution of one wavenumber. It has been used in DOEÆs Atmospheric Radiation Measurement (ARM) program. Much of the data available here at the Cooperative Institute for Meteorological Satellite Studies (CIMSS), an institute within the University of Wisconsin’s Space Science and Engineering Center, may also be available in the ARM Archive. On this website, data and images from six different field experiments are available, along with AERIPLUS realtime data for the Madison, Wisconsin location. Realtime data includes temperature and water vapor time-height cross sections, SKEWT diagrams, convective stability indices, and displays from a rooftop Lidar instrument. The field experiments took place in Oaklahoma and Wisconsin with the AERI prototype.

71

Radiance: Science and Stagecraft Come Together via Alan Alda and Marie  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Radiance: Science and Stagecraft Come Together via Alan Alda and Radiance: Science and Stagecraft Come Together via Alan Alda and Marie Curie Radiance: Science and Stagecraft Come Together via Alan Alda and Marie Curie May 27, 2011 - 1:30pm Addthis Alan Alda | Photo Courtesy of www.alanalda.com Alan Alda | Photo Courtesy of www.alanalda.com Charles Rousseaux Charles Rousseaux Senior Writer, Office of Science They might appear to have little in common. She received two Nobel Prizes. He won six Emmys. She was born in Poland and made her name in Paris. He was born in New York City, and made his fame in Hollywood. Despite their differences, Marie Curie and Alan Alda will be coming together on opening night of the upcoming World Science Festival, through a special reading of his first play, Radiance: The Passion of Marie Curie.

72

Radiance: Science and Stagecraft Come Together via Alan Alda and Marie  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Radiance: Science and Stagecraft Come Together via Alan Alda and Radiance: Science and Stagecraft Come Together via Alan Alda and Marie Curie Radiance: Science and Stagecraft Come Together via Alan Alda and Marie Curie May 27, 2011 - 1:30pm Addthis Alan Alda | Photo Courtesy of www.alanalda.com Alan Alda | Photo Courtesy of www.alanalda.com Charles Rousseaux Charles Rousseaux Senior Writer, Office of Science They might appear to have little in common. She received two Nobel Prizes. He won six Emmys. She was born in Poland and made her name in Paris. He was born in New York City, and made his fame in Hollywood. Despite their differences, Marie Curie and Alan Alda will be coming together on opening night of the upcoming World Science Festival, through a special reading of his first play, Radiance: The Passion of Marie Curie.

73

The Marine-Atmospheric Emitted Radiance Interferometer: A High-Accuracy, Seagoing Infrared Spectroradiometer  

Science Conference Proceedings (OSTI)

The Marine-Atmospheric Emitted Radiance Interferometer (M-AERI) is described, and some examples of the environmental variables that can be derived from its measurements and the types of research that these can support are briefly presented. The M-...

P. J. Minnett; R. O. Knuteson; F. A. Best; B. J. Osborne; J. A. Hanafin; O. B. Brown

2001-06-01T23:59:59.000Z

74

Dual-Regression Retrieval Algorithm for Real-Time Processing of Satellite Ultraspectral Radiances  

Science Conference Proceedings (OSTI)

A fast physically based dual-regression (DR) method is developed to produce, in real time, accurate profile and surface- and cloud-property retrievals from satellite ultraspectral radiances observed for both clear- and cloudy-sky conditions. The ...

William L. Smith Sr.; Elisabeth Weisz; Stanislav V. Kireev; Daniel K. Zhou; Zhenglong Li; Eva E. Borbas

2012-08-01T23:59:59.000Z

75

Assessing NOAA-16 HIRS Radiance Accuracy Using Simultaneous Nadir Overpass Observations from AIRS  

Science Conference Proceedings (OSTI)

The High-Resolution Infrared Radiation Sounder (HIRS) has been carried on NOAA satellites for more than two decades, and the HIRS data have been widely used for geophysical retrievals, climate studies, and radiance assimilation for numerical ...

Likun Wang; Changyong Cao; Pubu Ciren

2007-09-01T23:59:59.000Z

76

Interchannel Error Correlation Associated with AIRS Radiance Observations: Inference and Impact in Data Assimilation  

Science Conference Proceedings (OSTI)

The interchannel observation error correlation (IOEC) associated with radiance observations is currently assumed to be zero in meteorological data assimilation systems. This assumption may lead to suboptimal analyses. Here, the IOEC is inferred ...

Louis Garand; Sylvain Heilliette; Mark Buehner

2007-06-01T23:59:59.000Z

77

Impact Study of AMSR-E Radiances in the NCEP Global Data Assimilation System  

Science Conference Proceedings (OSTI)

The impact of radiance observations from the Advanced Microwave Scanning Radiometer for Earth Observing System (AMSR-E) was investigated in the National Centers for Environmental Prediction (NCEP) Global Data Assimilation System (GDAS). The GDAS ...

Masahiro Kazumori; Quanhua Liu; Russ Treadon; John C. Derber

2008-02-01T23:59:59.000Z

78

An Evaluation of Above- and In-Water Methods for Determining Water-Leaving Radiances  

Science Conference Proceedings (OSTI)

A high-quality dataset collected at an oceanographic tower was used to compare water-leaving radiances derived from simultaneous above- and in-water optical measurements. The former involved two different above-water systems and four different ...

Stanford B. Hooker; Gordana Lazin; Giuseppe Zibordi; Scott McLean

2002-04-01T23:59:59.000Z

79

Global Observations of Upper-Tropospheric Water Vapor Derived from TOVS Radiance Data  

Science Conference Proceedings (OSTI)

This paper describes a physically based method for the retrieval of upper-tropospheric humidity (UTH) and upper-tropospheric column water vapor (UTCWV) based an the use of radiance data collected by the TIROS Operational Vertical Sounder (TOVS), ...

Graeme L. Stephens; Darren L. Jackson; Ian Wittmeyer

1996-02-01T23:59:59.000Z

80

Surface Emissivity Impact on Temperature and Moisture Soundings from Hyperspectral Infrared Radiance Measurements  

Science Conference Proceedings (OSTI)

An accurate land surface emissivity (LSE) is critical for the retrieval of atmospheric temperature and moisture profiles along with land surface temperature from hyperspectral infrared (IR) sounder radiances; it is also critical to assimilating IR ...

Zhigang Yao; Jun Li; Jinlong Li; Hong Zhang

2011-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "radiance synthetic imaging" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

RETRIEVAL OF ATMOSPHERIC INVERSIONS USING GEOSTATIONARY HIGH-SPECTRAL-RESOLUTION SOUNDER RADIANCE INFORMATION  

E-Print Network (OSTI)

P5.38 RETRIEVAL OF ATMOSPHERIC INVERSIONS USING GEOSTATIONARY HIGH-SPECTRAL- RESOLUTION SOUNDER RADIANCE INFORMATION Jun Li Cooperative Institute for Meteorological Satellite Studies (CIMSS) University and possible fog formation, numerical model initialization, and sounding retrieval. High- spectral

Li, Jun

82

Global, Seasonal Cloud Variations from Satellite Radiance Measurements. Part II. Cloud Properties and Radiative Effects  

Science Conference Proceedings (OSTI)

Global, daily, visible and infrared radiance measurements from the NOAA-5 Scanning Radiometer (SR) are analyzed for the months of January, April, July and October 1977 to infer cloud and surface radiative properties and their effects on the Earth ...

William B. Rossow; Andrew A. Lacis

1990-11-01T23:59:59.000Z

83

A Method for Combining Radiances and Wind Shear to Define the Temperature Structure of the Atmosphere  

Science Conference Proceedings (OSTI)

The retrieval of temperature from satellite-observed radiances has traditionally been addressed as a one-dimensional or columnar problem which uses a guess profile of temperature. In this study, the traditional approach is augmented by ...

John Lewis; Christopher Hayden; John Derber

1989-06-01T23:59:59.000Z

84

Satellite Radiance Assimilation in the JMA Operational Mesoscale 4D-Var System  

Science Conference Proceedings (OSTI)

The direct radiance assimilation scheme used in the Japan Meteorological Agency (JMA) global analysis system is applied to the JMA mesoscale 4-dimensional variational (4D-Var) system with two modifications. First, the data thinning distance is ...

Masahiro Kazumori

85

Mesoscale Spectra of Mars’s Atmosphere Derived from MGS TES Infrared Radiances  

Science Conference Proceedings (OSTI)

Wavenumber spectra of the atmospheric potential energy of Mars at mesoscales (wavelengths of 64–957 km) were obtained as a function of latitude, season, and Martian year using infrared radiance data obtained by the Thermal Emission Spectrometer (...

Takeshi Imamura; Yasuhiro Kawasaki; Tetsuya Fukuhara

2007-05-01T23:59:59.000Z

86

Global, Seasonal Cloud Variations from Satellite Radiance Measurements. Part I: Sensitivity of Analysis  

Science Conference Proceedings (OSTI)

Global, daily, visible and infrared radiance measurements from the NOAA-5 Scanning Radiometer (SR) are analyzed for the months of January, April, July and October 1977 to infer cloud and surface radiative properties. In this first paper in a ...

William B. Rossow; Leonid C. Garder; Andrew A. Lacis

1989-05-01T23:59:59.000Z

87

A Technique for Estimating Outgoing Longwave Radiation from HIRS Radiance Observations  

Science Conference Proceedings (OSTI)

A new technique for estimating outgoing longwave radiation from observations on the NOAA operational satellites has been developed from a regression analysis of radiation model calculations. The technique consists of a weighted sum of radiance in ...

Robert G. Ellingson; David J. Yanuk; Hai-Tien Lee; Arnold Gruber

1989-08-01T23:59:59.000Z

88

Satellite Determinations of the Relationship between Total Longwave Radiation Flux and Infrared Window Radiance  

Science Conference Proceedings (OSTI)

Nimbus-7 satellite observations are used to determine the relationship between the total longwave radiation flux and the radiance in the 10-12 ?m infrared window. The total longwave fluxes are obtained from the earth radiation budget (ERB) narrow-...

George Ohring; Arnold Gruber; Robert Ellingson

1984-03-01T23:59:59.000Z

89

Clear-Sky Window Channel Radiances: A Comparison between Observations and the ECMWF Model  

Science Conference Proceedings (OSTI)

A comparison of clear-sky radiances of the Meteosat window channel with the European Centre for Medium-Range Weather Forecasts (ECMWF) model results is presented, aiming to assess both the model's performance and the quality of the observations. ...

Isabel F. Trigo; Pedro Viterbo

2003-10-01T23:59:59.000Z

90

Definition: Interferometric Synthetic Aperture Radar | Open Energy  

Open Energy Info (EERE)

Interferometric Synthetic Aperture Radar Interferometric Synthetic Aperture Radar Jump to: navigation, search Dictionary.png Interferometric Synthetic Aperture Radar Interferometric Synthetic Aperture Radar (InSAR) utilizes SAR images from two different time periods to generate maps of surface deformation. The technique can potentially measure millimeter-scale changes in the Earth's surface.[1][2] View on Wikipedia Wikipedia Definition Also Known As InSAR, IfSAR Related Terms Synthetic Aperture Radar, radar, sustainability References ↑ Synthetic Aperture Radar Interferometry to Measure Earth's Surface Topography and Its Deformation (Burgmann et al. 2000) ↑ Improved Visulaization of Satellite Radar InSAR Observed Structural Controls at Producing Geothermal Field Using Modeled Horizontal Surface Displacements(Opplinger et al. 2006)

91

What is Synthetic Aperture Radar? -- Sandia National Laboratories  

NLE Websites -- All DOE Office Websites (Extended Search)

What is Synthetic Aperture Radar? Environmental monitoring, earth-resource mapping, and military systems require broad-area imaging at high resolutions. Many times the imagery must...

92

Synthetic HDL created  

Science Conference Proceedings (OSTI)

Scientists at Northwestern University (Evanston, Illinois, USA) have created a promising new weapon-synthetic high-density lipoprotein (HDL), the "good" cholesterol-that could help fight chronically high cholesterol levels. Synthetic HDL created ...

93

ACCELERATION OF RADIANCE FOR LIGHTING SIMULATION BY USING PARALLEL COMPUTING WITH OPENCL  

NLE Websites -- All DOE Office Websites (Extended Search)

ACCELERATION OF RADIANCE FOR LIGHTING SIMULATION BY USING ACCELERATION OF RADIANCE FOR LIGHTING SIMULATION BY USING PARALLEL COMPUTING WITH OPENCL Wangda Zuo, Andrew McNeil, Michael Wetter, Eleanor Lee Building Technologies Department, Environmental Energy Technologies Division, Lawrence Berkeley National Laboratory, Berkeley, CA 94720, USA ABSTRACT We report on the acceleration of annual daylighting simulations for fenestration systems in the Radiance ray-tracing program. The algorithm was optimized to reduce both the redundant data input/output operations and the floating-point operations. To further accelerate the simulation speed, the calculation for matrix multiplications was implemented using parallel computing on a graphics processing unit. We used OpenCL, which is a cross- platform parallel programming language. Numerical

94

Radiance Comparisons of MODIS and AIRS Using Spatial Response Information  

Science Conference Proceedings (OSTI)

The combination of multiple satellite instruments on a pixel-by-pixel basis is a difficult task, even for instruments collocated in space and time, such as the Moderate Resolution Imaging Spectroradiometer (MODIS) and Atmospheric Infrared Sounder ...

M. M. Schreier; B. H. Kahn; A. Eldering; D. A. Elliott; E. Fishbein; F. W. Irion; T. S. Pagano

2010-08-01T23:59:59.000Z

95

Information Content and Uncertainties in Thermodynamic Profiles and Liquid Cloud Properties Retrieved from the Ground-Based Atmospheric Emitted Radiance Interferometer (AERI)  

Science Conference Proceedings (OSTI)

The Atmospheric Emitted Radiance Interferometer (AERI) observes spectrally resolved downwelling radiance emitted by the atmosphere in the infrared portion of the electromagnetic spectrum. Profiles of temperature and water vapor, and cloud liquid ...

D.D. Turner; U. Löhnert

96

Monitoring of IR Clear-Sky Radiances over Oceans for SST (MICROS)  

Science Conference Proceedings (OSTI)

Monitoring of IR Clear-Sky Radiances over Oceans for SST (MICROS) is a Web-based tool to monitor “model minus observation” (M ? O) biases in clear-sky brightness temperatures (BTs) and sea surface temperatures (SSTs) produced by the Advanced Clear-...

Xingming Liang; Alexander Ignatov

2011-10-01T23:59:59.000Z

97

Assimilation of AIRS Radiances Affected by Mid- to Low-Level Clouds  

Science Conference Proceedings (OSTI)

An approach to make use of Atmospheric Infrared Sounder (AIRS) cloud-affected infrared radiances has been developed at Météo-France in the context of the global numerical weather prediction model. The method is based on (i) the detection and the ...

Thomas Pangaud; Nadia Fourrie; Vincent Guidard; Mohamed Dahoui; Florence Rabier

2009-12-01T23:59:59.000Z

98

Immersion Factor of In-Water Radiance Sensors: Assessment for a Class of Radiometers  

Science Conference Proceedings (OSTI)

The spectral immersion factor of in-water radiance sensors If quantifies the effects of changes in the sensor's response when operated in water versus in air. The values of If are currently computed with a relationship derived from a basic sensor ...

Giuseppe Zibordi

2006-02-01T23:59:59.000Z

99

Autonomous Above-Water Radiance Measurements from an Offshore Platform: A Field Assessment Experiment  

Science Conference Proceedings (OSTI)

An autonomous system for making above-water radiance measurements has been produced by adding a new measurement scenario to a CIMEL CE-318 sun photometer. The new system, called the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) Photometer ...

G. Zibordi; S. B. Hooker; J. F. Berthon; D. D'Alimonte

2002-05-01T23:59:59.000Z

100

Platform and Environmental Effects on Above-Water Determinations of Water-Leaving Radiances  

Science Conference Proceedings (OSTI)

A comparison of above- and in-water spectral measurements in Case-1 conditions showed the uncertainty in above-water determinations of water-leaving radiances depended on the pointing angle of the above-water instruments with respect to the side ...

Stanford B. Hooker; André Morel

2003-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "radiance synthetic imaging" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Definition: Synthetic Aperture Radar | Open Energy Information  

Open Energy Info (EERE)

Aperture Radar Aperture Radar Jump to: navigation, search Dictionary.png Synthetic Aperture Radar Synthetic-aperture radar (SAR) is an active microwave remote sensing technology that measures the phase difference between a radar wave emitted from an antennae attached to a satellite or aircraft to generate high-resolution images of a surface.[1] View on Wikipedia Wikipedia Definition Also Known As SAR Related Terms radar References ↑ Synthetic Aperature Radar: Systems and Signal Processing (Curlander and McDonough - 1991 - book) fue LikeLike UnlikeLike You like this.Sign Up to see what your friends like. l cell, Retrieved from "http://en.openei.org/w/index.php?title=Definition:Synthetic_Aperture_Radar&oldid=493069" Category: Definitions What links here Related changes

102

Performance Assessment of the Optical Transient Detector and Lightning Imaging Sensor. Part I: Predicted Diurnal Variability  

Science Conference Proceedings (OSTI)

Laboratory calibration and observed background radiance data are used to determine the effective sensitivities of the Optical Transient Detector (OTD) and Lightning Imaging Sensor (LIS), as functions of local hour and pixel location within the ...

Dennis J. Boccippio; William J. Koshak; Richard J. Blakeslee

2002-09-01T23:59:59.000Z

103

Posters Atmospheric Emitted Radiance Interferometer: Status and Water Vapor Continuum Results  

NLE Websites -- All DOE Office Websites (Extended Search)

9 9 Posters Atmospheric Emitted Radiance Interferometer: Status and Water Vapor Continuum Results H. E. Revercomb, R. O. Knuteson, W. L. Smith, F. A. Best, and R. G. Dedecker University of Wisconsin Madison, Wisconsin H. B. Howell National Oceanic and Atmospheric Administration Systems Design and Applications Branch Madison, Wisconsin Introduction Accurate and spectrally detailed observations of the thermal emission from radiatively important atmospheric gases, aerosols, and clouds are now being provided to the Atmospheric Radiation Measurement (ARM) data base by the Atmospheric Emitted Radiance Interferometer (AERI) prototype at the Southern Great Plains Cloud and Radiation Testbed (CART) site. Spectra over the range from 520 to 3000 cm -1 (3 to 19 microns) with a resolution of 0.5 cm

104

Process of preparing metal parts to be heated by means of infrared radiance  

DOE Patents (OSTI)

A method for preparing metal for heating by infrared radiance to enable uniform and consistent heating. The surface of one or more metal parts, such as aluminum or aluminum alloy parts, is treated to alter the surface finish to affect the reflectivity of the surface. The surface reflectivity is evaluated, such as by taking measurements at one or more points on the surface, to determine if a desired reflectivity has been achieved. The treating and measuring are performed until the measuring indicates that the desired reflectivity has been achieved. Once the treating has altered the surface finish to achieve the desired reflectivity, the metal part may then be exposed to infrared radiance to heat the metal part to a desired temperature, and that heating will be substantially consistent throughout by virtue of the desired reflectivity.

Mayer, Howard Robinson (Cincinnati, OH); Blue, Craig A. (Knoxville, TN)

2009-06-09T23:59:59.000Z

105

Synthetic and Mechanistic Chemistry publications  

NLE Websites -- All DOE Office Websites (Extended Search)

Synthetic and Mechanistic Synthetic and Mechanistic publications Research into alternative forms of energy, especially energy security, is one of the major national...

106

Future Synthetic Fuels  

NLE Websites -- All DOE Office Websites (Extended Search)

- 12:00pm Location: Bldg. 90 During this presentation, we will give some background on Gas To Liquids - the synthetic fuel used in transport- its beneficial emission properties...

107

Detection of Cloud-Top Height from Backscattered Radiances within the Oxygen A Band. Part 1: Theoretical Study  

Science Conference Proceedings (OSTI)

A series of radiative transfer calculations were performed to study the possibility of determining cloud-top pressure (height) from backscattered solar radiances within the oxygen A-band absorption. For the development of a cloud-top pressure ...

J. Fischer; H. Grassl

1991-09-01T23:59:59.000Z

108

Spatial and Temporal Variations in Mesoscale Water Vapor Retrieved from TOVS Infrared Radiances in a Nocturnal Inversion Situation  

Science Conference Proceedings (OSTI)

Mesoscale moisture fields are retrieved from TOVS (TIROS Operational Vertical Sounder) infrared radiances from two polar-orbiting satellites. A special feature of the retrieval process is the determination of the surface skin temperature ...

Donald W. Hillger

1984-05-01T23:59:59.000Z

109

A Model for Solar Spectral Irradiance and Radiance at the Bottom and Top of a Cloudless Atmosphere  

Science Conference Proceedings (OSTI)

A simple model is presented that, in a cloud-free atmosphere, calculates solar spectral direct and diffuse irradiance and directional radiance at the surface, spectral absorption within the atmosphere and the upward reflected spectral irradiance ...

C. G. Justus; M. V. Paris

1985-03-01T23:59:59.000Z

110

Profiling the Lower Troposphere over the Ocean with Infrared Hyperspectral Measurements of the Marine-Atmosphere Emitted Radiance Interferometer  

Science Conference Proceedings (OSTI)

Measurements of the spectra of infrared emission from the atmosphere were taken by a Marine-Atmospheric Emitted Radiance Interferometer (M-AERI) deployed on the NOAA ship Ronald H. Brown during the Aerosol and Ocean Science Expedition (AEROSE) in ...

Malgorzata Szczodrak; Peter J. Minnett; Nicholas R. Nalli; Wayne F. Feltz

2007-03-01T23:59:59.000Z

111

Retrieval of Atmospheric Profiles from Satellite Radiance Data by Typical Shape Function Maximum a Posteriori Simultaneous Retrieval Estimators  

Science Conference Proceedings (OSTI)

The retrieval of vertical profiles of temperature and water vapor from atmospheric radiances is an ill-posed, nonlinear inversion problem. A linear retrieval estimator must be cast in a form which both minimizes the effects of unmodeled nonlinear ...

Michael J. Uddstrom

1988-05-01T23:59:59.000Z

112

Near-Continuous Profiling of Temperature, Moisture, and Atmospheric Stability Using the Atmospheric Emitted Radiance Interferometer (AERI)  

Science Conference Proceedings (OSTI)

The Department of Energy Atmospheric Radiation Measurement Program (ARM) has funded the development and installation of five ground-based atmospheric emitted radiance interferometer (AERI) systems at the Southern Great Plains (SGP) site. The ...

W. F. Feltz; W. L. Smith; H. B. Howell; R. O. Knuteson; H. Woolf; H. E. Revercomb

2003-05-01T23:59:59.000Z

113

Spatial Patterns of Climate Variability in Upper-Tropospheric Water Vapor Radiances from Satellite Data and Climate Model Simulations  

Science Conference Proceedings (OSTI)

The use of multivariate fingerprints and spatial pattern correlation in the detection and attribution of climate change has concentrated on radiosonde temperature fields. However, the large body of radiance data from satellite-borne instruments ...

A. J. Geer; J. E. Harries; H. E. Brindley

1999-07-01T23:59:59.000Z

114

Toward an Integrated Land–Ocean Surface Skin Temperature Analysis from the Variational Assimilation of Infrared Radiances  

Science Conference Proceedings (OSTI)

Geostationary Operational Environmental Satellite (GOES)-East and -West window channel radiances are directly assimilated using a 1D variational technique, providing surface skin temperature (Ts) estimates over all surface types (land, water, or ...

Louis Garand

2003-05-01T23:59:59.000Z

115

Comparison of AIRS and IASI Radiances Using GOES Imagers as Transfer Radiometers toward Climate Data Records  

Science Conference Proceedings (OSTI)

The Atmospheric Infrared Sounder (AIRS) and the Infrared Atmospheric Sounding Interferometer (IASI), together with the future Cross-track Infrared Sounder, will provide long-term hyperspectral measurements of the earth and its atmosphere at 10 ...

Likun Wang; Xiangqian Wu; Mitch Goldberg; Changyong Cao; Yaping Li; Seung-Hee Sohn

2010-03-01T23:59:59.000Z

116

Satellite-Derived Sea Surface Temperatures: Evaluation of GOES-8 and GOES-9 Multispectral Imager Retrieval Accuracy  

Science Conference Proceedings (OSTI)

Sea surface temperature (SST) retrieval accuracy from the multispectral imager on the new generation of GOES satellites is analyzed. Equations for two and three infrared channels are empirically derived using cloud-free satellite radiances ...

Douglas A. May; Walter O. Osterman

1998-06-01T23:59:59.000Z

117

Synthetic Aperture Radar Movie Gallery -- Sandia National Laboratories  

NLE Websites -- All DOE Office Websites (Extended Search)

Synthetic Aperture Radar Movie Gallery Synthetic Aperture Radar Movie Gallery This gallery features movies of Sandia National Laboratories' synthetic aperture radar imagery of Albuquerque, New Mexico and Washington, DC. Sandia's Twin-Otter SAR produced these high-resolution stripmap images in real time. (Note: The movies below have been downsampled greatly to make them suitable for viewing on the world wide web. These movies are not recommended for modems of speeds less than 56 kbps due to their large file sizes.) Albuquerque, NM Area Movies Sandia National Laboratories' Twin-Otter SAR produced these Ku-Band 0.3 and 1.0 meter resolution images of Albuquerque, NM in real time. Synthetic aperture radar movie of west Gibson Blvd 0.3 meter airborne synthetic aperture radar movie from I-25 to Maxwell along Gibson Blvd. (Length: 30 seconds)

118

Biodegradable synthetic bone composites  

DOE Patents (OSTI)

The invention provides for a biodegradable synthetic bone composition comprising a biodegradable hydrogel polymer scaffold comprising a plurality of hydrolytically unstable linkages, and an inorganic component; such as a biodegradable poly(hydroxyethylmethacrylate)/hydroxyapatite (pHEMA/HA) hydrogel composite possessing mineral content approximately that of human bone.

Liu, Gao; Zhao, Dacheng; Saiz, Eduardo; Tomsia, Antoni P.

2013-01-01T23:59:59.000Z

119

(Computational) synthetic biology  

Science Conference Proceedings (OSTI)

The ultimate goal of systems biology is the development of executable in silico models of cells and organisms. Systems biology attempts to provide an integrative methodology, which while able to cope with -on the one hand- the data deluge that is being ... Keywords: algorithmic systems biology, executable biology, infobiotics, p systems, synthetic biology, systems biology

Natalio Krasnogor

2011-07-01T23:59:59.000Z

120

Radiance Temperature  

Science Conference Proceedings (OSTI)

... Temperature using Detectors Calibrated for Absolute Spectral Power Response, HW ... A Third Generation Water Bath Based Blackbody Source, JB ...

2013-06-27T23:59:59.000Z

Note: This page contains sample records for the topic "radiance synthetic imaging" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Acceleration of Radiance for Lighting Simulation by Using Parallel Computing with OpenCL  

Science Conference Proceedings (OSTI)

We report on the acceleration of annual daylighting simulations for fenestration systems in the Radiance ray-tracing program. The algorithm was optimized to reduce both the redundant data input/output operations and the floating-point operations. To further accelerate the simulation speed, the calculation for matrix multiplications was implemented using parallel computing on a graphics processing unit. We used OpenCL, which is a cross-platform parallel programming language. Numerical experiments show that the combination of the above measures can speed up the annual daylighting simulations 101.7 times or 28.6 times when the sky vector has 146 or 2306 elements, respectively.

Zuo, Wangda; McNeil, Andrew; Wetter, Michael; Lee, Eleanor

2011-09-06T23:59:59.000Z

122

Simulating the Daylight Performance of Complex Fenestration Systems Using Bidirectional Scattering Distribution Functions within Radiance  

SciTech Connect

We describe two methods which rely on bidirectional scattering distribution functions (BSDFs) to model the daylighting performance of complex fenestration systems (CFS), enabling greater flexibility and accuracy in evaluating arbitrary assemblies of glazing, shading, and other optically-complex coplanar window systems. Two tools within Radiance enable a) efficient annual performance evaluations of CFS, and b) accurate renderings of CFS despite the loss of spatial resolution associated with low-resolution BSDF datasets for inhomogeneous systems. Validation, accuracy, and limitations of the methods are discussed.

Ward, Gregory; Mistrick, Ph.D., Richard; Lee, Eleanor; McNeil, Andrew; Jonsson, Ph.D., Jacob

2011-01-21T23:59:59.000Z

123

A model for the directional distribution of the diffuse sky radiance with an application to a CPC collector  

SciTech Connect

The development of a new, semi-empirical model for the directional distribution of the diffuse radiance is reported. The proposed regression-type model, with the form of its base functions obtained from physical principles, is based on a combination of the purely physical reasoning approach and the purely empirical approach. Direct multiple-scattering calculations are circumvented through the use of the method of successive orders of scattering. The model is calibrated for the mean diffuse radiance estimated under all sky conditions reported in a large and comprehensive diffuse radiance data set. It is found that only a small increase in accuracy is gained by including higher orders of scattering, and this increase does not justify the complexity of the resulting model. Therefore, the single scattering approximation is recommended. The use of the model is illustrated in a typical application, in which the fraction of diffuse radiation intercepted by the receive of a compound parabolic concentrator is computed.

Siala, F.M.F. (Center for Solar Energy Studies, Tripoli (Libya)); Hooper, F.C. (Univ. of Toronto, Ontario (Canada))

1990-01-01T23:59:59.000Z

124

Improved ARM-SGP TOA OLR Fluxes from GOES-8 IR Radiances Based on CERES Data  

NLE Websites -- All DOE Office Websites (Extended Search)

ARM-SGP TOA OLR Fluxes from GOES-8 IR ARM-SGP TOA OLR Fluxes from GOES-8 IR Radiances Based on CERES Data D. R. Doelling and M. M. Khaiyer Analytical Services and Materials, Inc. Hampton, Virginia P. Minnis National Aeronautics and Space Administration Langley Research Center Hampton, Virginia Introduction The radiation budget at the top of the atmosphere (TOA) is a quantity of fundamental importance to the Atmospheric Radiation Measurement (ARM) Program. Thus, it is necessary to measure the radiation budget components, broadband shortwave albedo and outgoing longwave radiation (OLR), as accurately as possible. Measurement of OLR over the ARM surface sites has only been possible since the advent of Clouds and the Earth's Radiant Energy System (CERES; Wielicki et al. 1998) in 1998. Prior to

125

Synthetic fuels: production and products  

DOE Green Energy (OSTI)

A brief primer on synthetic fuels is given. The paper includes brief descriptions of generic conversion technologies that can be used to convert various raw materials such as coal, oil shale, tar sands, peat, and biomass into synthetic fuels similar in character to petroleum-derived fuels currently in commerce. References for additional information on synthetic fuel processes and products are also given in the paper.

Singh, S.P.N.

1984-01-01T23:59:59.000Z

126

Synthetic fuels: production and products  

DOE Green Energy (OSTI)

A brief review on synthetic fuels is given. The paper includes brief descriptions of generic conversion technologies that can be used to convert various raw materials such as coal, oil shale, tar sands, peat and biomass into synthetic fuels similar in character to petroleum-derived fuels currently in commerce. Because the subject is vast and the space is limited, references for additional information on synthetic fuel processes and products are also given in the paper. 24 references.

Singh, S.P.

1985-08-01T23:59:59.000Z

127

Synthetic skins with humanlike warmth  

Science Conference Proceedings (OSTI)

Synthetic skins with humanlike characteristics, such as a warm touch, may be able to ease the social stigma associated with the use of prosthetic hands by enabling the user to conceal its usage during social touching situations. Similarly for social ... Keywords: prosthetics, rehabilitation robotics, social robotics, synthetic skin, warm skin

John-John Cabibihan; Rangarajan Jegadeesan; Saba Salehi; Shuzhi Sam Ge

2010-11-01T23:59:59.000Z

128

Imaging  

NLE Websites -- All DOE Office Websites (Extended Search)

Imaging Print Imaging Print The wavelengths of soft x-ray photons (1-15 nm) are very well matched to the creation of "nanoscopes" capable of probing the interior structure of biological cells and inorganic mesoscopic systems.Topics addressed by soft x-ray imaging techniques include cell biology, nanomagnetism, environmental science, and polymers. The tunability of synchrotron radiation is absolutely essential for the creation of contrast mechanisms. Cell biology CAT scans are performed in the "water window" (300-500 eV). Nanomagnetism studies require the energy range characteristic of iron, cobalt, and nickel (600-900 eV). Mid- and far-infrared (energies below 1 eV) microprobes using synchrotron radiation are being used to address problems such as chemistry in biological tissues, chemical identification and molecular conformation, environmental biodegradation, mineral phases in geological and astronomical specimens, and electronic properties of novel materials. Infrared synchrotron radiation is focused through, or reflected from, a small spot on the specimen and then analyzed using a spectrometer. Tuning to characteristic vibrational frequencies serves as a sensitive fingerprint for molecular species. Images of the various species are built up by raster scanning the specimen through the small illuminated spot.

129

Influence of sky radiance measurement errors on inversion-retrieved aerosol properties  

SciTech Connect

Remote sensing of the atmospheric aerosol is a well-established technique that is currently used for routine monitoring of this atmospheric component, both from ground-based and satellite. The AERONET program, initiated in the 90's, is the most extended network and the data provided are currently used by a wide community of users for aerosol characterization, satellite and model validation and synergetic use with other instrumentation (lidar, in-situ, etc.). Aerosol properties are derived within the network from measurements made by ground-based Sun-sky scanning radiometers. Sky radiances are acquired in two geometries: almucantar and principal plane. Discrepancies in the products obtained following both geometries have been observed and the main aim of this work is to determine if they could be justified by measurement errors. Three systematic errors have been analyzed in order to quantify the effects on the inversion-derived aerosol properties: calibration, pointing accuracy and finite field of view. Simulations have shown that typical uncertainty in the analyzed quantities (5% in calibration, 0.2 Degree-Sign in pointing and 1.2 Degree-Sign field of view) yields to errors in the retrieved parameters that vary depending on the aerosol type and geometry. While calibration and pointing errors have relevant impact on the products, the finite field of view does not produce notable differences.

Torres, B.; Toledano, C.; Cachorro, V. E.; Bennouna, Y. S.; Fuertes, D.; Gonzalez, R.; Frutos, A. M. de [Atmospheric Optics Group (GOA), University of Valladolid, Valladolid (Spain); Berjon, A. J. [Izana Atmospheric Research Center, Meteorological State Agency of Spain (AEMET), Sta. Cruz de Tenerife (Spain); Dubovik, O.; Goloub, P.; Podvin, T.; Blarel, L. [Laboratory of Atmospheric Optics, Universite Lille 1, Villeneuve d'Ascq (France)

2013-05-10T23:59:59.000Z

130

Evaluating Water Vapor in the NCAR CAM3 Climate Model with RRTMG/McICA using Modeled and Observed AIRS Spectral Radiances  

NLE Websites -- All DOE Office Websites (Extended Search)

Water Vapor in the NCAR CAM3 Climate Model with Water Vapor in the NCAR CAM3 Climate Model with RRTMG/McICA using Modeled and Observed AIRS Spectral Radiances Michael J. Iacono, Atmospheric and Environmental Research, Inc., 131 Hartwell Avenue, Lexington, MA 02421 USA 1. Overview Objectives: * Evaluate water vapor and temperature simulation in two versions of CAM3 by comparing modeled and observed cloud-cleared AIRS spectral radiances. * Use spectral differences to verify comparisons between modeled water vapor and temperature and observed fields retrieved from AIRS radiances. Models: OSS: Optimal Spectral Sampling model developed at AER was used to simulate clear sky AIRS radiance spectra in CAM3. RRTMG/McICA: ARM-supported LW and SW radiative transfer model developed at AER for application to GCMs. RRTMG has been fully

131

Top-of-Atmosphere Radiance-to-Flux Conversion in the SW Domain for the ScaRaB-3 Instrument on Megha-Tropiques  

Science Conference Proceedings (OSTI)

The earth radiation budget (ERB) is the difference between the solar absorbed flux and the terrestrial emitted flux. These fluxes are calculated from satellite measurements of outgoing shortwave (SW) and longwave (LW) radiances using empirical or ...

Michel Viollier; Carsten Standfuss; Olivier Chomette; Arnaud Quesney

2009-10-01T23:59:59.000Z

132

Satellite Data Assimilation in Numerical Weather Prediction Models. Part II: Uses of Rain-Affected Radiances from Microwave Observations for Hurricane Vortex Analysis  

Science Conference Proceedings (OSTI)

A hybrid variational scheme (HVAR) is developed to produce the vortex analysis associated with tropical storms. This scheme allows for direct assimilation of rain-affected radiances from satellite microwave instruments. In the HVAR, the ...

Fuzhong Weng; Tong Zhu; Banghua Yan

2007-11-01T23:59:59.000Z

133

Impact of Assimilating AMSU-A Radiances on Forecasts of 2008 Atlantic Tropical Cyclones Initialized with a Limited-Area Ensemble Kalman Filter  

Science Conference Proceedings (OSTI)

The impact of assimilating radiance observations from the Advanced Microwave Sounding Unit-A (AMSU-A) on forecasts of several tropical cyclones (TCs) was studied using the Weather Research and Forecasting Model (WRF) and a limited-area ensemble ...

Zhiquan Liu; Craig S. Schwartz; Chris Snyder; So-Young Ha

2012-12-01T23:59:59.000Z

134

Intersatellite Radiance Biases for the High-Resolution Infrared Radiation Sounders (HIRS) on board NOAA-15, -16, and -17 from Simultaneous Nadir Observations  

Science Conference Proceedings (OSTI)

Intersatellite radiance comparisons for the 19 infrared channels of the High-Resolution Infrared Radiation Sounders (HIRS) on board NOAA-15, -16, and -17 are performed with simultaneous nadir observations at the orbital intersections of the ...

Changyong Cao; Hui Xu; Jerry Sullivan; Larry McMillin; Pubu Ciren; Yu-Tai Hou

2005-04-01T23:59:59.000Z

135

Effects of the Choice of Meteorological Data on a Radiation Model Simulation of the NOAA Technique for Estimating Outgoing Longwave Radiation from Satellite Radiance Observations  

Science Conference Proceedings (OSTI)

The technique used by NOAA to estimate the outgoing longwave flux from 10 ?m window radiance observations has been reexamined because the data that result from the application of the empirically determined regression equation are systematically ...

Robert G. Ellingson; David J. Yanuk; Arnold Gruber

1989-08-01T23:59:59.000Z

136

Determination of Rainfall Rates from GOES Satellite Images by a Pattern Recognition Technique  

Science Conference Proceedings (OSTI)

Radiances from clouds observed in visible and infrared images obtained from the SMS-2, GOES-2, and GOES-4 satellites have been used to estimate rainfall by means of a pattern recognition algorithm that was applied to single images. The algorithm ...

Rongzhang Wu; James A. Weinman; Roland T. Chin

1985-09-01T23:59:59.000Z

137

Synthetic and Mechanistic Chemistry publications  

NLE Websites -- All DOE Office Websites (Extended Search)

Synthetic and Mechanistic Chemistry » Synthetic and Mechanistic Chemistry » Synthetic and Mechanistic Synthetic and Mechanistic publications Research into alternative forms of energy, especially energy security, is one of the major national security imperatives of this century. Get Expertise Dave Thorn Chemistry Program Manager Email Josh Smith Chemistry Communications Email "Research into alternative forms of energy, of which biofuels is a key component, is one of the major national security imperatives of this century. Energy security is vital to our future national security and the efficient functioning of our market economy." -LANL Director Charles McMillan Harshini Mukundan, Hongzhi Xie, Aaron S. Anderson, W. Kevin Grace, John E. Shively, and Basil I. Swanson, "Optimizing a waveguide-based sandwich immunoassay for tumor biomarkers: Evaluating fluorescent labels and functional surfaces," Bioconjugate Chemistry 20(2), 222-230 (2009).

138

SYNTHETIC SLING FAILURE - EVALUATIONS & RECOMMENDATIONS  

SciTech Connect

The information and evaluations provided in this report were compiled to address the recurring problem of synthetic sling failure. As safety is the number one priority in all work aspects, a solution must be devised to prevent accidents from occurring. A total of thirteen cases regarding synthetic sling failure were evaluated in order to determine their causes, effects, and preventative measures. From the collected data, it was found that all cases in which the synthetic sling contacted the edge of its load resulted in sling failure. It is required that adequate synthetic sling protection devices be used to protect slings in any lift where the sling comes in direct contact with the edge or corner of its load. However, there are no consensus codes or standards stating the type, material, or purpose of the type of protective device used to protect the sling from being cut. Numerous industry standards and codes provide vague descriptions on how to protect synthetic slings. Without a clear, concise statement of how to protect synthetic slings, it is common for inadequate materials and sling protection devices to be used in an attempt to meet the intent of these requirements. The use of an inadequate sling protection device is the main cause of synthetic sling failure in all researched cases. Commercial sling protection devices come in many shapes and sizes, and have a variety of names, as well as advertised uses. 'Abrasion pads' and 'wear protectors' are two different names for products with the same intended purpose. There is no distinguishable way to determine the extent of sling protection which these devices will provide, or what specific scenarios they are made for. This creates room for error in a field where error is unacceptable. This report provides a recommended action for hoisting and rigging activities which require synthetic slings to contact a load, as well as recommended changes to industry standards which will benefit overall industry safety.

MACKEY TC; HENDERSON CS

2009-10-26T23:59:59.000Z

139

Synthetic environment employing a craft for providing user perspective reference  

DOE Patents (OSTI)

A multi-dimensional user oriented synthetic environment system allows application programs to be programmed and accessed with input/output device independent, generic functional commands which are a distillation of the actual functions performed by any application program. A shared memory structure allows the translation of device specific commands to device independent, generic functional commands. Complete flexibility of the mapping of synthetic environment data to the user is thereby allowed. Accordingly, synthetic environment data may be provided to the user on parallel user information processing channels allowing the subcognitive mind to act as a filter, eliminating irrelevant information and allowing the processing of increase amounts of data by the user. The user is further provided with a craft surrounding the user within the synthetic environment, which craft, imparts important visual referential an motion parallax cues, enabling the user to better appreciate distances and directions within the synthetic environment. Display of this craft in close proximity to the user's point of perspective may be accomplished without substantially degrading the image resolution of the displayed portions of the synthetic environment.

Maples, Creve (Albuquerque, NM); Peterson, Craig A. (Albuquerque, NM)

1997-10-21T23:59:59.000Z

140

Multifrequency and multistatic inverse synthetic aperture radar, with application to FM passive radar  

Science Conference Proceedings (OSTI)

This paper deals with the imaging of a moving target using a multifrequency and multistatic radar consisting in one receiver and several narrowband transmitters. Considering two hypotheses about the studied target, we derive two multistatic inverse synthetic ...

Guillaume Ginolhac; Françoise Schmitt; Franck Daout; Philippe Forster

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "radiance synthetic imaging" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

The Rhine Outflow Plume Studied by the Analysis of Synthetic Aperture Radar Data and Numerical Simulations  

Science Conference Proceedings (OSTI)

The dynamics of the Rhine outflow plume in the proximity of the river mouth is investigated by using remote sensing data and numerical simulations. The remote sensing data consist of 41 synthetic aperture radar (SAR) images acquired by the First ...

Katrin Hessner; Angelo Rubino; Peter Brandt; Werner Alpers

2001-10-01T23:59:59.000Z

142

Observations of Bora Events over the Adriatic Sea and Black Sea by Spaceborne Synthetic Aperture Radar  

Science Conference Proceedings (OSTI)

Bora events over the Adriatic Sea and Black Sea are investigated by using synthetic aperture radar (SAR) images acquired by the advanced SAR (ASAR) on board the European satellite Envisat. It is shown that the sea surface roughness patterns ...

Werner Alpers; Andrei Ivanov; Jochen Horstmann

2009-03-01T23:59:59.000Z

143

A New Instrument for Measurement of the Solar Aureole Radiance Distribution from Unstable Platforms  

Science Conference Proceedings (OSTI)

A novel imaging solar aureole radiometer, which can obtain absolute radiometric measurements of the solar aureole when operated on an unstable platform, is described. A CCD array is used to image the aureole, while a neutral density occulter on a ...

Joseph M. Ritter; Kenneth J. Voss

2000-08-01T23:59:59.000Z

144

Synthetic aperture radar processing with tiered subapertures  

SciTech Connect

Synthetic Aperture Radar (SAR) is used to form images that are maps of radar reflectivity of some scene of interest, from range soundings taken over some spatial aperture. Additionally, the range soundings are typically synthesized from a sampled frequency aperture. Efficient processing of the collected data necessitates using efficient digital signal processing techniques such as vector multiplies and fast implementations of the Discrete Fourier Transform. Inherent in image formation algorithms that use these is a trade-off between the size of the scene that can be acceptably imaged, and the resolution with which the image can be made. These limits arise from migration errors and spatially variant phase errors, and different algorithms mitigate these to varying degrees. Two fairly successful algorithms for airborne SARs are Polar Format processing, and Overlapped Subaperture (OSA) processing. This report introduces and summarizes the analysis of generalized Tiered Subaperture (TSA) techniques that are a superset of both Polar Format processing and OSA processing. It is shown how tiers of subapertures in both azimuth and range can effectively mitigate both migration errors and spatially variant phase errors to allow virtually arbitrary scene sizes, even in a dynamic motion environment.

Doerry, A.W. [Sandia National Labs., Albuquerque, NM (United States). Synthetic Aperture Radar Dept.

1994-06-01T23:59:59.000Z

145

Future Prospects of Synthetic Fuels  

E-Print Network (OSTI)

It is important for the future of this nation to reach the goal of demonstrated definition and quantification of the parameters which influence the ability to use this country's vast resources of coal and oil shale for production of synthetic fuels which can contribute to the nation's future energy needs. Those parameters are: technical, environmental, and economic viability. In the final analysis, the key word is economics; can, or when can synthetic fuels compete in the marketplace? A commercial synthetic fuels plant requires a multi-billion dollar capital investment. It is the purpose of this paper to discuss the risk elements of a synthetic fuels venture and to speculate on what impact the current environment, e.g. governmental policy, world crude market prices, and general economic climate may have on the timetable for achievement of the aforementioned goal. In June 1980 the author presented a paper at the AIChE Meeting in Philadelphia, Pa. entitled 'Synthetic Fuels - Their Problems and Their Promises.' The opening paragraph of that paper started as follows: 'For three decades, since the days of World War II, a U.S. synthetic fuels industry has several times verged on becoming a reality but never succeeding, the ups and downs resembling a sine wave of variable frequency. As of this writing we are at the crest of the wave. Is this the time it will happen? For the good of the nation hopefully the answer will be yes.' It is the purpose of this paper, some 20 months later, to examine what has transpired in that time interval and to speculate, in the light of those events, about their impact on the likelihood of the answer still being 'yes' and on the timing as to when it may occur. To set the stage for consideration of the importance of recent events and to put them in perspective, it is necessary to return again to the earlier paper where some of the impediments to the establishment of a U.S. synfuels industry were discussed. In essence what was said was that the principal impediments were: economic, environmental, and regulatory, and since both the economic and regulatory aspects exert some direct and/or indirect influence on cost, the problem really reduced to the single most important factor--project economics. Synthetic fuels simply are expensive to produce!

Fryback, M. G.

1982-01-01T23:59:59.000Z

146

Rapid Daytime Estimation of Cloud Properties over a Large Area from Radiance Distributions  

Science Conference Proceedings (OSTI)

An algorithm is developed to rapidly estimate cloud properties for a large area from daytime imager data. In this context, a large area refers to a grid cell composed of many imager pixels. The algorithm assumes a gamma distribution to model the ...

Andrew K. Heidinger

2003-09-01T23:59:59.000Z

147

Assessment of the Quality of MODIS Cloud Products from Radiance Simulations  

Science Conference Proceedings (OSTI)

Observations made by the Moderate Resolution Imaging Spectroradiometer (MODIS), the Atmospheric Infrared Sounder (AIRS), the Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO), and CloudSat are synergistically used to ...

Seung-Hee Ham; Byung-Ju Sohn; Ping Yang; Bryan A. Baum

2009-08-01T23:59:59.000Z

148

ISCCP Global Radiance Data Set: A New Resource for Climate Research  

Science Conference Proceedings (OSTI)

The Operational data-collection phase of the International Satellite Cloud Climatology Project(ISCCP) began in July 1983 as an element of the World Climate Research Program (WCRP). Since then, raw images from an international network of ...

R. A. Schiffer; W. B. Rossow

1985-12-01T23:59:59.000Z

149

Precipitable Water Estimation from High-Resolution Split Window Radiance Measurements  

Science Conference Proceedings (OSTI)

A technique that uses the spatial variance of image brightness temperature to derive total column Precipitable water is applied to high-resolution multispectral aircraft scanner data for the 19 June 1986 COHMEX day. The technique has several ...

Gary J. Jedlovec

1990-09-01T23:59:59.000Z

150

Synthetic LDL as targeted drug delivery vehicle  

SciTech Connect

The present invention provides a synthetic LDL nanoparticle comprising a lipid moiety and a synthetic chimeric peptide so as to be capable of binding the LDL receptor. The synthetic LDL nanoparticle of the present invention is capable of incorporating and targeting therapeutics to cells expressing the LDL receptor for diseases associated with the expression of the LDL receptor such as central nervous system diseases. The invention further provides methods of using such synthetic LDL nanoparticles.

Forte, Trudy M. (Berkeley, CA); Nikanjam, Mina (Richmond, CA)

2012-08-28T23:59:59.000Z

151

Fusion reactors for synthetic fuels  

DOE Green Energy (OSTI)

Some of the types of processes now being considered for synthetic fuels production from fusion energy, together with an example of each type are listed. The process efficiency is defined as the chemical energy in the generated hydrogen (at the higher heating value (HHV)) divided by the total fusion energy release, including alpha particles and secondary neutron reactions in the blanket. Except where specifically noted, both high and low temperature blanket heats are counted as part of total fusion energy release.

Powell, J.R.

1979-01-01T23:59:59.000Z

152

Synthetic thermoelectric materials comprising phononic crystals  

DOE Patents (OSTI)

Synthetic thermoelectric materials comprising phononic crystals can simultaneously have a large Seebeck coefficient, high electrical conductivity, and low thermal conductivity. Such synthetic thermoelectric materials can enable improved thermoelectric devices, such as thermoelectric generators and coolers, with improved performance. Such synthetic thermoelectric materials and devices can be fabricated using techniques that are compatible with standard microelectronics.

El-Kady, Ihab F; Olsson, Roy H; Hopkins, Patrick; Reinke, Charles; Kim, Bongsang

2013-08-13T23:59:59.000Z

153

Remotely Controlled, Continuous Observations of Infrared Radiance with the CSIRO/ARM Mark II Radiometer at the SGP CART Site  

NLE Websites -- All DOE Office Websites (Extended Search)

Remotely Controlled, Continuous Observations of Remotely Controlled, Continuous Observations of Infrared Radiance with the CSIRO/ARM Mark II Radiometer at the SGP CART Site C. M. R. Platt and R. T. Austin Department of Atmospheric Science Colorado State University Fort Collins, Colorado C. M. R. Platt and J. A. Bennett Commonwealth Scientific and Industrial Research Organization Atmospheric Research Aspendale, Victoria, Australia Abstract The Commonwealth Scientific and Industrial Research Organization/Atmospheric Radiation Measurement (CSIRO/ARM) Program Mark II infrared (IR) filter radiometer operated continuously at the Southern Great Plains (SGP) Cloud and Radiation Testbed (CART) site for a period of five weeks. Data of high quality were obtained by remote operation and data transfer with no evidence of spurious

154

Synthetic carbonaceous fuels and feedstocks  

SciTech Connect

This invention relates to the use of a three compartment electrolytic cell in the production of synthetic carbonaceous fuels and chemical feedstocks such as gasoline, methane and methanol by electrolyzing an aqueous sodium carbonate/bicarbonate solution, obtained from scrubbing atmospheric carbon dioxide with an aqueous sodium hydroxide solution, whereby the hydrogen generated at the cathode and the carbon dioxide liberated in the center compartment are combined thermocatalytically into methanol and gasoline blends. The oxygen generated at the anode is preferably vented into the atmosphere, and the regenerated sodium hydroxide produced at the cathode is reused for scrubbing the CO.sub.2 from the atmosphere.

Steinberg, Meyer (Huntington Station, NY)

1980-01-01T23:59:59.000Z

155

Synthetic IR Scene Simulation of Air-borne Targets  

E-Print Network (OSTI)

IR scenes of high fidelity are needed to support the development and testing of various target detection and tracking techniques. It is impractical to test detection and tracking algorithms under all conceivable conditions. Therefore, to test the effectiveness of detection and tracking algorithms under variety of scenarios, synthetic IR scenes are generated. For air-borne targets, the presence of clouds plays an important role, since they affect most IR sensors. We propose, a mod- ification of original Gardner's Method [3], in order to generate clouds of richer spectral content. We also ex- plore an algorithm based on self-similarity [5] for cloud texture generation. Synthetic IR cloud images generated by our scene simulation software are radiometrically accurate and have typical cloud texture variations. We use Modtran J.O for radiometric calculation and VRML (Virtual Reality Modeling Language) for scene rendering.

Shankar T. More; Avinash A. Pandit; Avinash A. P; S. N. Merchant; U. B. Desai

2002-01-01T23:59:59.000Z

156

Infrared Cloud Imager Deployment at the North Slope of Alaska During Early 2002  

NLE Websites -- All DOE Office Websites (Extended Search)

Infrared Cloud Imager Deployment Infrared Cloud Imager Deployment at the North Slope of Alaska During Early 2002 J. A. Shaw and B. Thurairajah Department of Electrical and Computer Engineering Montana State University Bozeman, Montana E. Edqvist National Oceanic and Atmospheric Administration Environmental Technology Laboratory Boulder, Colorado K. Mizutani Communications Research Laboratory Koganei, Tokyo, Japan Introduction Starting in February 2002, we deployed a new cloud-radiation sensor called the infrared cloud imager (ICI) at the North Slope of Alaska (NSA) site near Barrow, Alaska (71.32 N, 156.62 W). ICI records radiometrically calibrated images of the thermal infrared sky radiance in the 8µm to 14 µm wavelength band, from which spatial cloud statistics and spatially resolved cloud radiance can be determined.

157

Synthetic Genomics Inc | Open Energy Information  

Open Energy Info (EERE)

search Name Synthetic Genomics Inc. Place La Jolla, California Sector Hydro, Hydrogen, Renewable Energy Product California-based company planning to create new types of...

158

INTRODUCTION Synthetic biology: history, challenges  

E-Print Network (OSTI)

," scientists exploring new technologies such as hydroponics in space, biofuels, and plant-based medicines. #12, including logo, installation shots, rights-free images, and sample press release Range of wholesale products-based products and land-use techniques--such as biofuels, organic farming, and soy-based plastics and inks

Haseloff, Jim

159

Guidelines for Using Synthetic Slings for Lifting and Rigging  

Science Conference Proceedings (OSTI)

"Guidelines for Using Synthetic Slings for Lifting and Rigging" provides nuclear and fossil maintenance personnel with information on the use of synthetic slings. This information will assist personnel in the identification, protection, and inspection of synthetic slings.

2003-02-10T23:59:59.000Z

160

Synthetic aperture imaging for three dimensional resolution of fluid flows  

E-Print Network (OSTI)

Fluid mechanics and instrumentation have a long history together, as experimental fluids studies play an important role in describing a more complete physical picture in a variety of problems. Presently. state-of-the-art ...

Belden, Jesse (Jesse Levi)

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "radiance synthetic imaging" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

FEATURE-AIDED TRACKING VIA SYNTHETIC HYPERSPECTRAL IMAGERY A. Rice, J. Vasquez, M. Mendenhall  

E-Print Network (OSTI)

-aided tracking (FAT) is an emerging area of research, employing HSI instruments and exploitation techniques of studies have been conducted to demonstrate HSI-FAT with contemporary and novel HSI in- struments, synthetic hyperspectral rendering, and full image-chain treatment of the various sensor models. Cor

Kerekes, John

162

Wavefront reconstruction of elevation circular synthetic aperture aperture radar imagery using a cylindrical Green's function  

Science Conference Proceedings (OSTI)

Elevation Circular Synthetic Aperture Radar (E-CSAR) is a novel radar modality used to form radar images from data sets acquired along a complete or even a segment of a cylindrical geometry above a given scan area. Due to the nonlinear nature of the ...

Daniel Flores-Tapia; Gabriel Thomas; Stephen Pistorius

2010-01-01T23:59:59.000Z

163

Synthetic aperture radar and interferometry development at Sandia National Laboratories  

SciTech Connect

Environmental monitoring, earth-resource mapping, and military systems require broad-area imaging at high resolutions. Many times the imagery must be acquired in inclement weather or during night as well as day. Synthetic aperture radar (SAR) provides such a capability. SAR systems take advantage of the long-range propagation characteristics of radar signals and the complex information processing capability of modern digital electronics to provide high resolution imagery. SAR complements photographic and other optical imaging capabilities because of the minimum constrains on time-of-day and atmospheric conditions and because of the unique responses of terrain and cultural targets to radar frequencies. Interferometry is a method for generating a three-dimensional image of terrain. The height projection is obtained by acquiring two SAR images from two slightly differing locations. It is different from the common method of stereoscopic imaging for topography. The latter relies on differing geometric projections for triangulation to define the surface geometry whereas interferometry relies on differences in radar propagation times between the two SAR locations. This paper presents the capabilities of SAR, explains how SAR works, describes a few SAR applications, provides an overview of SAR development at Sandia, and briefly describes the motion compensation subsystem.

1993-04-01T23:59:59.000Z

164

Foundational platform for mammalian synthetic biology  

E-Print Network (OSTI)

The emergent field of synthetic biology is different from many other biological engineering efforts, in that its roots, design principles, and forward engineering perspective have been adopted from electrical engineering ...

Davidsohn, Noah (Noah Justin)

2013-01-01T23:59:59.000Z

165

Bio-Synthetic Wall Systems Visualization  

NLE Websites -- All DOE Office Websites (Extended Search)

Bio-Synthetic Wall Systems Visualization Speaker(s): Maria-Paz Gutierrez Date: December 16, 2008 - 10:00am Location: 90-3075 Seminar HostPoint of Contact: Michael Donn...

166

The Synthetic Dual-Doppler Analysis Technique  

Science Conference Proceedings (OSTI)

Synthetic dual-Doppler (SDD) is a single-Doppler analysis technique that combines measurements from two different times, provided the viewing angle changes significantly. In this study, the viability of the SDD technique is investigated through ...

Brian A. Klimowski; John D. Marwitz

1992-12-01T23:59:59.000Z

167

Synthetic analogs of bacterial quorum sensors  

DOE Patents (OSTI)

Bacterial quorum-sensing molecule analogs having the following structures: ##STR00001## and methods of reducing bacterial pathogenicity, comprising providing a biological system comprising pathogenic bacteria which produce natural quorum-sensing molecule; providing a synthetic bacterial quorum-sensing molecule having the above structures and introducing the synthetic quorum-sensing molecule into the biological system comprising pathogenic bacteria. Further is provided a method of targeted delivery of an antibiotic, comprising providing a synthetic quorum-sensing molecule; chemically linking the synthetic quorum-sensing molecule to an antibiotic to produce a quorum-sensing molecule-antibiotic conjugate; and introducing the conjugate into a biological system comprising pathogenic bacteria susceptible to the antibiotic.

Iyer, Rashi S.; Ganguly, Kumkum; Silks, Louis A.

2013-01-08T23:59:59.000Z

168

Predatory sequence learning for synthetic characters  

E-Print Network (OSTI)

The process of mammalian predatory sequence development offers a number of insights relevant to the goal of designing synthetic characters that can quickly and easily learn complicated and interesting behavior. We propose ...

Berlin, Matthew Roberts, 1980-

2003-01-01T23:59:59.000Z

169

Authentic teaching and learning through synthetic biology  

E-Print Network (OSTI)

Synthetic biology is an emerging engineering discipline that, if successful, will allow well-characterized biological components to be predictably and reliably built into robust organisms that achieve specific functions. ...

Kuldell, Natalie

170

Encounter of Foehn Wind with an Atmospheric Eddy over the Black Sea as Observed by the Synthetic Aperture Radar Onboard Envisat  

Science Conference Proceedings (OSTI)

Foehn wind blowing through the Kolkhida (Kolkheti) Lowland in the southwestern Caucasus (western Georgia) was observed on an Envisat synthetic aperture radar (SAR) image as it encountered an atmospheric cyclonic eddy over the Black Sea on 13 ...

Werner Alpers; Andrei Yu. Ivanov; Knut-Frode Dagestad

2011-12-01T23:59:59.000Z

171

Radiance Temperature Calibrations  

Science Conference Proceedings (OSTI)

... Argon Supply and Alarm 55 "C Chilled Water/Cold Water Switch Digital Voltmeter Gold-filled Crucible Heat Pipe Furnace Personal Computer ...

2010-08-19T23:59:59.000Z

172

Synthetic heparin-binding factor analogs  

DOE Patents (OSTI)

The invention provides synthetic heparin-binding growth factor analogs having at least one peptide chain, and preferably two peptide chains branched from a dipeptide branch moiety composed of two trifunctional amino acid residues, which peptide chain or chains bind a heparin-binding growth factor receptor and are covalently bound to a non-signaling peptide that includes a heparin-binding domain, preferably by a linker, which may be a hydrophobic linker. The synthetic heparin-binding growth factor analogs are useful as pharmaceutical agents, soluble biologics or as surface coatings for medical devices.

Pena, Louis A. (Poquott, NY); Zamora, Paul O. (Gaithersburg, MD); Lin, Xinhua (Plainview, NY); Glass, John D. (Shoreham, NY)

2010-04-20T23:59:59.000Z

173

Structure of the surface of synthetic titanosilica  

Science Conference Proceedings (OSTI)

X-ray photoelectron spectroscopy (ESCA), high-resolution NMR (on /sup 29/Si nuclei), and mass spectrometry have been used to investigate a synthetic titanosilica (TS) containing 28-37% titanium dioxide. It has been found that titanium siloxane bonds can form in synthetic TS, regardless of the fact that silicon-oxygen polyhedra predominate in the surface layer. The presence of titanium ions in the surface layer of TS leads to its significant rearrangement; this reduces significantly the concentration of centers for the strong adsorption of water.

Zarko, V.I.; Brei, V.V.; Chuiko, A.A.; Gorlov, Y.I.; Kozub, G.M.; Senkevich, A.I.

1986-09-01T23:59:59.000Z

174

Dual-transponder Precision Navigation System for Synthetic Aperture Sonar  

E-Print Network (OSTI)

The technical details of a dual-transponder, long-baseline positioning system to measure the sway of a free towed Synthetic Aperture Sonar (SAS) are presented. The sway is measured with respect to freely deployed, battery powered, transponders which sit stationary on the seabed connected via cables to floating buoys housing high-accuracy GPS timing receivers. A T/R switch allows a single hydrophone on each transponder to alternately receive and transmit linear FM chirp signals. The time of flight of the signals is determined by matched-filtering using a DSP and transmitted to the towboat for storage in real time using RF modems. The sway information is completely independent for each sonar ping and allows the deblurring of the SAS images by post processing. A Matlab simulation predicts a worst case sway accuracy of cm.

E N Pilbrow; M P Hayes; P T Gough

2002-01-01T23:59:59.000Z

175

Immobilization of radioiodine in synthetic boracite  

DOE Patents (OSTI)

A nuclear waste storage product is disclosed in which radioiodine is incorporated in a synthetic boracite. The boracite may be prepared by reacting a transition metal iodide with an alkali horate under mild hydrothermal conditions, drying the reaction product, and then hot pressing.

Babad, H.; Strachan, D.M.

1982-09-23T23:59:59.000Z

176

Synthetic fuel production by indirect coal liquefaction  

E-Print Network (OSTI)

, the production of a synthetic crude oil product by direct contact of coal with an appropriate catalyst, with abundant domestic coal resources but lim- ited oil and gas resources, the conversion of coal into liquid in South Africa (for Fischer- Tropsch fuels). Also, the US Department of Energy an- nounced its financial

177

Synthetic fuels, carbon dioxide and climate  

Science Conference Proceedings (OSTI)

The observed increase in atmospheric carbon dioxide (CO2) has been attributed to the use of fossil fuels. There is concern that the generation and use of synthetic fuels derived from oil shale and coal will accelerate the increase of CO2.

Alex R. Sapre; John R. Hummel; Ruth A. Reck

1982-01-01T23:59:59.000Z

178

Relative chemical composition of selected synthetic crudes  

DOE Green Energy (OSTI)

A knowledge of the composition of synthetic crudes can provide an important input into the assessment of occupational exposure monitoring requirements for the coal conversion and oil shale industries. This paper summarizes comparative compositional studies of coal- and shale-derived crude oils with petroleum crude oils as a reference point.

Griest, W.H.; Guerin, M.R.; Clark, B.R.; Ho, C.; Rubin, I.B.; Jones, A.R.

1978-01-01T23:59:59.000Z

179

Experimentally driven verification of synthetic biological circuits  

Science Conference Proceedings (OSTI)

We present a framework that allows us to construct and formally analyze the behavior of synthetic gene circuits from specifications in a high level language used in describing electronic circuits. Our back-end synthesis tool automatically generates genetic-regulatory ...

Boyan Yordanov; Evan Appleton; Rishi Ganguly; Ebru Aydin Gol; Swati Banerjee Carr; Swapnil Bhatia; Traci Haddock; Calin Belta; Douglas Densmore

2012-03-01T23:59:59.000Z

180

Comparison of Model-Produced and Observed Microwave Radiances and Estimation of Background Error Covariances for Hydrometeor Variables within Hurricanes  

Science Conference Proceedings (OSTI)

A radiative transfer model was updated to better simulate Special Sensor Microwave Imager (SSM/I)–observed brightness temperatures in areas of high ice concentration. The difference between the lowest observed and model-produced brightness ...

Clark Amerault; Xiaolei Zou

2006-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "radiance synthetic imaging" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Aspects of the political economy of development and synthetic biology  

E-Print Network (OSTI)

What implications might synthetic biology’s potential as a wholly new method of production have for the world economy, particularly developing countries? Theories of political economy predict that synthetic biology can ...

Wellhausen, Rachel

182

Fusion as a source of synthetic fuels  

DOE Green Energy (OSTI)

In the near-term, coal derived synthetic fuels will be used; but in the long-term, resource depletion and environmental effects will mandate synthetic fuels from inexhaustible sources - fission, fusion, and solar. Of the three sources, fusion appears uniquely suited for the efficient production of hydrogen-based fuels, due to its ability to directly generate very high process temperatures (up to approx. 2000/sup 0/C) for water splitting reactions. Fusion-based water splitting reactions include high temperature electrolysis (HTE) of steam, thermochemical cycles, hybrid electrochemical/thermochemical, and direct thermal decomposition. HTE appears to be the simplest and most efficient process with efficiencies of 50 to 70% (fusion to hydrogen chemical energy), depending on process conditions.

Powell, J.R.; Fillo, J.A.; Steinberg, M.

1981-01-01T23:59:59.000Z

183

BglBrick vectors and datasheets; a synthetic biology platform for gene expression  

E-Print Network (OSTI)

and datasheets: A synthetic biology platform for genepart by the Synthetic Biology Engineering Research Center,94720, USA. 6 Synthetic Biology Engineering Research Center,

2011-01-01T23:59:59.000Z

184

Metabolic engineering of microorganisms for biofuels production: from bugs to synthetic biology to fuels  

E-Print Network (OSTI)

DK, Weiss R: Synthetic biology: new engineering rules for anfrom bugs to synthetic biology to fuels Sung Kuk Lee, Howardengineering and synthetic biology will provide new tools for

Kuk Lee, Sung

2010-01-01T23:59:59.000Z

185

ARM - Evaluation Product - Airborne Visible/Infrared Imaging Spectrometer  

NLE Websites -- All DOE Office Websites (Extended Search)

ProductsAirborne Visible/Infrared Imaging ProductsAirborne Visible/Infrared Imaging Spectrometer (AVIRIS) Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Evaluation Product : Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) 1997.08.01 - 1997.08.01 Site(s) SGP General Description AVIRIS is an optical sensor that delivers calibrated images of the upwelling spectral radiance in 224 contiguous spectral channels (bands) with wavelengths from 400 to 2500 nanometers. AVIRIS has been flown on two aircraft platforms: a NASA ER-2 jet and the Twin Otter turboprop. The main objective of the AVIRIS project is to identify, measure, and monitor constituents of the Earth's surface and atmosphere based on molecular absorption and particle scattering signatures. Research with

186

NIST Image Gallery: Image Details  

Science Conference Proceedings (OSTI)

... Image Gallery : Image Details. 72 DPI Image 150 DPI Image No 300 DPI Version. Title: Frequency Comb, Ultrafast Laser. ...

187

NIST Image Gallery: Image Details  

Science Conference Proceedings (OSTI)

... Image Gallery : Image Details. 72 DPI Image 150 DPI Image No 300 DPI Version. Title: Iron-Based Superconductors. Description ...

188

NIST Image Gallery: Image Details  

Science Conference Proceedings (OSTI)

... Image Gallery : Image Details. 72 DPI Image 150 DPI Image No 300 DPI Version. Title: Space Weather Forecasts. Description ...

189

NIST Image Gallery: Image Details  

Science Conference Proceedings (OSTI)

... Image Gallery : Image Details. 72 DPI Image 150 DPI Image No 300 DPI Version. Title: Organic Solar Power. Description ...

190

Generation of synthetic multifractal realistic surfaces based on natural model and lognormal cascade: application to MRI classification  

Science Conference Proceedings (OSTI)

This paper presents a method of generating realistic synthetic multi-fractals surfaces, constructed with multiplicative cascades, that follow lognormal probability density function.The conservation of the natural image gradient direction, and the variance ... Keywords: Bayesian classification, Monte-Carlo sampling, discrete wavelet transform, iterative conditional modes (ICM), lognormal cascade, markov random fields (MRF), multifractal analysis, probabilistic model, wavelet leader

Mohamed Khider; Abdelmalik Taleb-Ahmed; Boualem Haddad

2010-11-01T23:59:59.000Z

191

NIST Image Gallery: Image Details  

Science Conference Proceedings (OSTI)

... 72 DPI Image © 150 DPI Image © 300 DPI Image ©. Title: Nanotechnology; Biotechnology/Health; Nanocrystals; Hwang. ...

192

Spectral change directions of multispectral subpixels in image fusion  

Science Conference Proceedings (OSTI)

In an image fusion process, the spatial detail in a panchromatic pixel is injected into the corresponding n-band multispectral (MS) subpixel to yield a synthetic pixel. The synthetic pixel can be regarded as the sum of three terms: the MS subpixel, a ...

Linhai Jing; Qiuming Cheng

2011-03-01T23:59:59.000Z

193

Speckle suppression in SAR images using the 2-D GARCH model  

Science Conference Proceedings (OSTI)

A novel Bayesian-based speckle suppression method for Synthetic Aperture Radar (SAR) images is presented that preserves the structural features and textural information of the scene. First, the logarithmic transform of the original image is analyzed ... Keywords: 2-D GARCH model, MAP estimation, speckle, statistical modeling, synthetic aperture radar

Maryam Amirmazlaghani; Hamidreza Amindavar; Alireza Moghaddamjoo

2009-02-01T23:59:59.000Z

194

Regional crop monitoring and discrimination based on simulated ENVISAT ASAR wide swath mode images  

Science Conference Proceedings (OSTI)

The current paper investigates the potential contribution of ENVISAT wide swath (WS) images for discrimination and monitoring of crops at a regional scale. The study was based on synthetic aperture radar (SAR) images acquired throughout an entire growing ... Keywords: Coarse spatial resolution, Crop discrimination, Crop monitoring, ENVISAT, Synthetic aperture radar, Wide swath-ASAR

X. Blaes; F. Holecz; H. J. C. van Leeuwen; P. Defourny

2007-01-01T23:59:59.000Z

195

Synthetic Aperture Radar Persistent Scatterer Interferometry (PSInSAR) |  

Open Energy Info (EERE)

Synthetic Aperture Radar Persistent Scatterer Interferometry (PSInSAR) Synthetic Aperture Radar Persistent Scatterer Interferometry (PSInSAR) Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Synthetic Aperture Radar Persistent Scatterer Interferometry (PSInSAR) Author Parviz Tarikhi Published N/A, 2010 DOI Not Provided Check for DOI availability: http://crossref.org Online Internet link for Synthetic Aperture Radar Persistent Scatterer Interferometry (PSInSAR) Citation Parviz Tarikhi. Synthetic Aperture Radar Persistent Scatterer Interferometry (PSInSAR) [Internet]. 2010. Tunis, Tunisia. N/A. [cited 2013/09/17]. Available from: http://parviztarikhi.files.wordpress.com/2010/05/3psinsar-i-parviz_tarikhi.pdf Retrieved from "http://en.openei.org/w/index.php?title=Synthetic_Aperture_Radar_Persistent_Scatterer_Interferometry_(PSInSAR)&oldid=682949"

196

Experimental deformation of natural and synthetic dolomite  

E-Print Network (OSTI)

Natural and hot isostatically pressed dolomite aggregates were experimentally deformed at effective pressures of Pe = 50 ?? 400 MPa, temperatures of 400 ?? 850??C, and strain rates of ?& = 1.2x10-4 s-1 to 1.2x10-7 s-1. Coarse- and fine-grained dolomite deformed at low temperature (T ? 700??C for coarse-grained natural dolomite, T < 700??C for fine-grained natural and synthetic dolomite) exhibit mechanical behavior that is nearly plastic; differential stresses are insensitive to strain rate, fitted either by a power law no?????????=??????31&& with n values that range from 12 to 49 or an exponential law ([31exp )] ??????=o&& with exponential law term ? values from 0.023 to 0.079 MPa-1. Microstructures of samples deformed at low temperatures include mechanical twins, and undulatory extinction suggesting that twin glide and dislocation slip are the predominant deformation mechanisms. At high temperatures (T ? 800??C) flow strengths of coarse- and fine-grained dolomite depend more strongly on strain-rate and exhibit pronounced temperature dependencies. Microstructures of coarse-grained dolomite samples deformed at T ? 800??C include undulatory extinction and fine recrystallized grains suggesting that recovery and dynamic recrystallization contribute to dislocation creep at these conditions. By comparison with lower temperature deformation, mechanical twinning is unimportant. Fine-grained synthetic dolomite deformed at high temperature (T ? 700??C) exhibits nearly linear (Newtonian) viscous behavior, with n = 1.28 (??0.15) consistent with grain boundary (Coble) diffusion creep. At low temperatures (T ? 700??C) coarse-grained dolomite exhibits higher strengths at higher temperatures which cannot be described by an Arrhenius relation, while fine-grained dolomite strengths show little or no temperature dependence. At high temperatures (T ? 800??C), dislocation creep of coarse-grained dolomite can be described by a thermally activated power law ??????????????????=RTHno*31exp??????&& with H*/n = 60 kJ/mol, or by an exponential law ()[]??????????=RTHo*31expexp?????&& with H*/? = 25447 kJ/mol. At high temperatures, diffusion creep of fine-grained synthetic dolomite can be described by ?????????????????????????=RTHdno*313exp??????&& with H* = 280 ??45 kJ/mol. Taken together, the flow laws for coarse- and fine-grained dolomites constrain the high temperature conditions over which crystal plasticity, dislocation creep, and diffusion creep dominate.

Davis, Nathan Ernest

2005-08-01T23:59:59.000Z

197

Inversion of synthetic aperture radar interferograms for sources...  

Open Energy Info (EERE)

Inversion of synthetic aperture radar interferograms for sources of production-related subsidence at the Dixie Valley geothermal field Jump to: navigation, search OpenEI Reference...

198

Mineralization of Synthetic Polymer Scaffolds: A Bottom-Up ...  

Mineralization of Synthetic Polymer Scaffolds: A Bottom-Up Approach for the Development of Artificial Bone Jie Song,*,†,‡ Viengkham Malathong,† and Carolyn R ...

199

NIST Image Gallery: Image Details  

Science Conference Proceedings (OSTI)

... 72 DPI Image © 150 DPI Image © 300 DPI Image ©. Title: Quantum Physics; Quantum Communications; Ultrafast Photon Detector; Nam. ...

200

NIST Image Gallery: Image Details  

Science Conference Proceedings (OSTI)

... 72 DPI Image © 150 DPI Image © 300 DPI Image ©. Title: Energy; Fossil Fuels;Distillation Curves for Complex Fuel Mixtures. ...

Note: This page contains sample records for the topic "radiance synthetic imaging" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

NIST Image Gallery: Image Details  

Science Conference Proceedings (OSTI)

... 72 DPI Image © 150 DPI Image © 300 DPI Image ©. Title: Scanning Electron Microscope with Spin Polarization Analysis. ...

202

NIST Image Gallery: Image Details  

Science Conference Proceedings (OSTI)

... 72 DPI Image © 150 DPI Image © 300 DPI Image ©. Title: Metrology, Basic Units; Mass; Electronic Kilogram. Description ...

203

NIST Image Gallery: Image Details  

Science Conference Proceedings (OSTI)

... nist.gov. 72 DPI Image © 150 DPI Image © 300 DPI Image ©. Title: Public safety & Smart Grid. Description: Electrical engineer ...

204

Fusion: an energy source for synthetic fuels  

DOE Green Energy (OSTI)

The decreasing availability of fossil fuels emphasizes the need to develop systems which will produce synthetic fuel to substitute for and supplement the natural supply. An important first step in the synthesis of liquid and gaseous fuels is the production of hydrogen. Thermonuclear fusion offers an inexhaustible source of energy for the production of hydrogen from water. Depending on design, electric generation efficiencies of approx. 40 to 60% and hydrogen production efficiencies by high temperature electrolysis of approx. 50 to 70% are projected for fusion reactors using high temperature blankets. Fusion/coal symbiotic systems appear economically promising for the first generation of commercial fusion synfuels plants. Coal production requirements and the environmental effects of large-scale coal usage would be greatly reduced by a fusion/coal system. In the long term, there could be a gradual transition to an inexhaustible energy system based solely on fusion.

Fillo, J A; Powell, J; Steinberg, M

1980-01-01T23:59:59.000Z

205

Chemical basis for photomutagenicity in synthetic fuels  

DOE Green Energy (OSTI)

Photomutagens (chemicals that enhance the mutagenicity of near uv-visible radiation) have been detected in a variety of experimental coal- and oil shale-derived synthetic fuels using S. typhimurium strain TA98 and fluorescent light. In this study, photomutagenic activity was measured among synfuel samples that included crude and hydrotreated shale oil, coal oil distillation fractions, and chemical class fractions of coal and shale oils. Photomutagenic activity was found to increase with increasing boiling point and was cencentrated in fractions enriched in neutral polycyclic aromatic hydrocarbons (PAH). These results point to high molecular weight neutral PAH constitutents as important photomutagenic components among the samples tested. The photomutagenic activities of the materials tested correlate well with the previously reported tumorigenic activities of the same samples on mouse skin but correlate poorly with the previously reported mutagenic activities in the conventional Salmonella/mammalian-microsome mutagenicity test in which neutral PAH fractions were inactive.

Selby, C.P.; Calkins, J.; Enoch, H.G.; Wright, C.W.; Wilson, B.W.

1985-12-01T23:59:59.000Z

206

(M) A SURVEY OF SYNTHETIC FUELISHNESS*  

E-Print Network (OSTI)

nuclear fission reactor plants, through "burn-up " of nuclear fuels, have all beenusedtoprovideheatfor direct use inhanes, institutions and industry, and to generate mechanical and electrical power using the Otto, Diesel and Rankine heat cycles. These fuels are considered to be natural since they are found innatureandareusedaftervaryingdegrees of processing, enrichment or refinement. Other energy sources includehydropxer,windpower, geothmlheatandheator electricity converted fransolar energy captured in stationary flat plate, one-axis tracking linear-trough and two-axis tracking spherical, parabolic or heliostatic collectors. These sources of energy also existinnature, butarenot fuels sinceburn-up is not required. This leaves ahostof fuels which canbe synthesized frannaturalrnaterials using an equal n&xx of electrical or chemical processes. These synthetic or manufactured fuels include coal gas, fuel oils derived fran coal, solid fuel residuals, methane derived fran sewage or kelp, ethanol derived fran fenxntation of grains, methanol derived fran destructive distillation of wood, and

F. F. Hall

1980-01-01T23:59:59.000Z

207

Cellular delivery and site-specific targeting of organic fluorophores for super-resolution imaging in living cells  

E-Print Network (OSTI)

Recent advances in super-resolution fluorescence microscopy have pushed the spatial resolution of biological imaging down to a few nanometers. The key element to the development of such imaging modality is synthetic organic ...

Uttamapinant, Chayasith

2013-01-01T23:59:59.000Z

208

Environmental data energy technology characterizations: synthetic fuels  

SciTech Connect

Environmental Data Energy Technology Characterizations are publications which are intended to provide policy analysts and technical analysts with basic environmental data associated with key energy technologies. This publication provides documentation on synthetic fuels (coal-derived and oil shale). The transformation of the energy in coal and oil shale into a more useful form is described in this publication in terms of major activity areas in the synthetic fuel cycles, that is, in terms of activities which produce either an energy product or a fuel leading to the production of an energy product in a different form. The activities discussed in this document are coal liquefaction, coal gasification, in-situ gasification, and oil shales. These activities represent both well-documented and advanced activity areas. The former activities are characterized in terms of actual operating data with allowance for future modification where appropriate. Emissions are assumed to conform to environmental standards. The advanced activity areas examined are those like coal liquefaction and in-situ retorting of oil shale. For these areas, data from pilot or demonstration plants were used where available; otherwise, engineering studies provided the data. The organization of the chapters in this volume is designed to support the tabular presentation in the summary volume. Each chapter begins with a brief description of the activity under consideration. The standard characteristics, size, availability, mode of functioning and place in the fuel cycle are presented. Next, major legislative and/or technological factors influencing the commercial operation of the activity are offered. Discussions of resources consumed, residuals produced, and economics follow. To aid in comparing and linking the different activity areas, data for each area are normalized to 10/sup 12/ Btu of energy output from the activity.

1980-04-01T23:59:59.000Z

209

NIST Image Gallery: Image Details  

Science Conference Proceedings (OSTI)

... Image Gallery : Image Details. 72 DPI Image No 150 DPI Version 300 DPI Image. Title: Ultrafast Laser Speeds Up Quest for Atomic Control. ...

210

NIST Image Gallery: Image Details  

Science Conference Proceedings (OSTI)

... Image Gallery : Image Details. 72 DPI Image 150 DPI Image No 300 DPI Version. Title: House; Trees. Description: *BFRL. Subjects (names): ...

211

NIST Image Gallery: Image Details  

Science Conference Proceedings (OSTI)

... 72 DPI Image © 150 DPI Image © 300 DPI Image ©. Title: New Imaging Tool is Boon to Fuel Cell Research. Description: NIST ...

212

Use of the ARM Measurement of Spectral Zenith Radiance For Better Understanding Of 3D Cloud-Radiation Processes and Aerosol-Cloud Interaction  

Science Conference Proceedings (OSTI)

Our proposal focuses on cloud-radiation processes in a general 3D cloud situation, with particular emphasis on cloud optical depth and effective particle size. We also focus on zenith radiance measurements, both active and passive. The proposal has three main parts. Part One exploits the �¢����solar-background�¢��� mode of ARM lidars to allow them to retrieve cloud optical depth not just for thin clouds but for all clouds. This also enables the study of aerosol cloud interactions with a single instrument. Part Two exploits the large number of new wavelengths offered by ARM�¢����s zenith-pointing ShortWave Spectrometer (SWS), especially during CLASIC, to develop better retrievals not only of cloud optical depth but also of cloud particle size. We also propose to take advantage of the SWS�¢���� 1 Hz sampling to study the �¢����twilight zone�¢��� around clouds where strong aerosol-cloud interactions are taking place. Part Three involves continuing our cloud optical depth and cloud fraction retrieval research with ARM�¢����s 2NFOV instrument by, first, analyzing its data from the AMF-COPS/CLOWD deployment, and second, making our algorithms part of ARM�¢����s operational data processing.

D. Jui-Yuan Chiu

2010-10-19T23:59:59.000Z

213

Atmospheric Longwave Irradiance Uncertainty: Pyrgeometers Compared to an Absolute Sky-Scanning Radiometer, Atmospheric Emitted Radiance Interferometer, and Radiative Transfer Model Calculations  

SciTech Connect

Because atmospheric longwave radiation is one of the most fundamental elements of an expected climate change, there has been a strong interest in improving measurements and model calculations in recent years. Important questions are how reliable and consistent are atmospheric longwave radiation measurements and calculations and what are the uncertainties? The First International Pyrgeometer and Absolute Sky-scanning Radiometer Comparison, which was held at the Atmospheric Radiation Measurement program's Souther Great Plains site in Oklahoma, answers these questions at least for midlatitude summer conditions and reflects the state of the art for atmospheric longwave radiation measurements and calculations. The 15 participating pyrgeometers were all calibration-traced standard instruments chosen from a broad international community. Two new chopped pyrgeometers also took part in the comparison. And absolute sky-scanning radiometer (ASR), which includes a pyroelectric detector and a reference blackbody source, was used for the first time as a reference standard instrument to field calibrate pyrgeometers during clear-sky nighttime measurements. Owner-provided and uniformly determined blackbody calibration factors were compared. Remarkable improvements and higher pyrgeometer precision were achieved with field calibration factors. Results of nighttime and daytime pyrgeometer precision and absolute uncertainty are presented for eight consecutive days of measurements, during which period downward longwave irradiance varied between 260 and 420 W m-2. Comparisons between pyrgeometers and the absolute ASR, the atmospheric emitted radiance interferometer, and radiative transfer models LBLRTM and MODTRAN show a surprisingly good agreement of <2 W m-2 for nighttime atmospheric longwave irradiance measurements and calculations.

Philipona, J. R.; Dutton, Ellsworth G.; Stoffel, T.; Michalsky, Joseph J.; Reda, I.; Stifter, Armin; Wendling, Peter; Wood, Norm; Clough, Shepard A.; Mlawer, Eli J.; Anderson, Gail; Revercomb, Henry E.; Shippert, Timothy R.

2001-06-04T23:59:59.000Z

214

Inversion of synthetic aperture radar interferograms for sources of  

Open Energy Info (EERE)

Inversion of synthetic aperture radar interferograms for sources of Inversion of synthetic aperture radar interferograms for sources of production-related subsidence at the Dixie Valley geothermal field Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: Inversion of synthetic aperture radar interferograms for sources of production-related subsidence at the Dixie Valley geothermal field Authors Bill Foxall and D. W. Vasco Published Journal Journal of Volcanology and Geothermal Research, 2008 DOI Not Provided Check for DOI availability: http://crossref.org Online Internet link for Inversion of synthetic aperture radar interferograms for sources of production-related subsidence at the Dixie Valley geothermal field Citation Bill Foxall,D. W. Vasco. 2008. Inversion of synthetic aperture radar interferograms for sources of production-related subsidence at the Dixie

215

Structural algorithm to reservoir reconstruction using passive seismic data (synthetic example)  

SciTech Connect

Using of passive seismic observations to detect a reservoir is a new direction of prospecting and exploration of hydrocarbons. In order to identify thin reservoir model we applied the modification of Gaussian elimination method in conditions of incomplete synthetic data. Because of the singularity of a matrix conventional method does not work. Therefore structural algorithm has been developed by analyzing the given model as a complex model. Numerical results demonstrate of its advantage compared with usual way of solution. We conclude that the gas reservoir is reconstructed by retrieving of the image of encasing shale beneath it.

Smaglichenko, Tatyana A.; Volodin, Igor A.; Lukyanitsa, Andrei A.; Smaglichenko, Alexander V.; Sayankina, Maria K. [Oil and Gas Research Institute, Russian Academy of Science, Gubkina str.3, 119333, Moscow (Russian Federation); Faculty of Computational Mathematics and Cybernetics, M.V. Lomonosov Moscow State University, Leninskie gory, 1, str.52,Second Teaching Building.119991 Moscow (Russian Federation); Shmidt's Institute of Physics of the Earth, Russian Academy of Science, Bolshaya Gruzinskaya str. 10, str.1, 123995 Moscow (Russian Federation); Oil and Gas Research Institute, Russian Academy of Science, Gubkina str.3, 119333, Moscow (Russian Federation)

2012-09-26T23:59:59.000Z

216

Structural algorithm to reservoir reconstruction using passive seismic data (synthetic example)  

Science Conference Proceedings (OSTI)

Using of passive seismic observations to detect a reservoir is a new direction of prospecting and exploration of hydrocarbons. In order to identify thin reservoir model we applied the modification of Gaussian elimination method in conditions of incomplete synthetic data. Because of the singularity of a matrix conventional method does not work. Therefore structural algorithm has been developed by analyzing the given model as a complex model. Numerical results demonstrate of its advantage compared with usual way of solution. We conclude that the gas reservoir is reconstructed by retrieving of the image of encasing shale beneath it.

2012-01-01T23:59:59.000Z

217

Forming rotated SAR images by real-time motion compensation.  

SciTech Connect

Proper waveform parameter selection allows collecting Synthetic Aperture Radar (SAR) phase history data on a rotated grid in the Fourier Space of the scene being imaged. Subsequent image formation preserves the rotated geometry to allow SAR images to be formed at arbitrary rotation angles without the use of computationally expensive interpolation or resampling operations. This should be useful where control of image orientation is desired such as generating squinted stripmaps and VideoSAR applications, among others.

Doerry, Armin Walter

2012-12-01T23:59:59.000Z

218

Comparison of Gas Puff Imaging Data in NSTX with the DEGAS 2 Simulation  

SciTech Connect

Gas-Pu -Imaging (GPI) is a two dimensional diagnostic which measures the edge D? light emission from a neutral D? gas puff near the outer mid- plane of the National Spherical Torus Experiment (NSTX). DEGAS 2 is a 3-D Monte Carlo code used to model neutral transport and plasma-neutral interactions in fusion plasmas. In this paper, we compare the measured and modeled D? light emission for speci c NSTX experiments. Both the simulated spatial distribution and radiance of the D? light emission agree well with the experimental data obtained between Edge Localized Modes (ELMs) in ELMy H-modes.

B. Cao, D.P. Stotler, S.J. Zweben, M. Bell, A.Diallo, B. LeBlanc

2013-04-10T23:59:59.000Z

219

Synthetic fuel utilization. Final report. Task 330  

DOE Green Energy (OSTI)

The presence of large coal resources in this country provided the spur for consideration of liquids derived from hydrogenation of coal in the search for alternate liquid fuels to replace petroleum. Previous developments particularly in German industry beginning in 1910 and reaching a capacity of approximately four million tons of products a year by 1944 and more recently a series of plants in South Africa have shown the practicability of coal liquefaction. A few more advanced processes have been developed variously to bench, pilot or commercial scale from among the thirty or more which were subject to study. Limitation in the amount of hydrogen used in these for reasons of economy and processing facility results in products containing major amounts of aromatics as well as significant portions of the sulfur and nitrogen of the coal feed. Combustion of the largely aromatic liquids can present problems in commercial burners designed for petroleum fuels, and combustion staging used to reduce NO/sub x/ emissions with the latter may encounter difficulties from sooting in the coal-derived fuels, which occurs readily with aromatics. This report presents a review of such problems in utilization of synthetic fuels from coal, emphasizing basic engineering and scientific studies which have been made. A research program involving a number of universities, industrial laboratories, and non-profit research institutions was carried out under the direction of the Department of Energy's Pittsburgh Energy Technology Center. This program is also reviewed. The major subjects covered are those of liquefaction product composition and properties, fuel spray and droplet processes, synfuel pyrolysis, combustion mechanics, soot formation, and pollutant emission. Recommendations concerning needs for investigation are made from an evaluation of the current status of the field and the results obtained in the program. 15 references, 1 figure, 7 tables.

Singer, S.

1983-01-01T23:59:59.000Z

220

Computational optimization of synthetic water channels.  

Science Conference Proceedings (OSTI)

Membranes for liquid and gas separations and ion transport are critical to water purification, osmotic energy generation, fuel cells, batteries, supercapacitors, and catalysis. Often these membranes lack pore uniformity and robustness under operating conditions, which can lead to a decrease in performance. The lack of uniformity means that many pores are non-functional. Traditional membranes overcome these limitations by using thick membrane materials that impede transport and selectivity, which results in decreased performance and increased operating costs. For example, limitations in membrane performance demand high applied pressures to deionize water using reverse osmosis. In contrast, cellular membranes combine high flux and selective transport using membrane-bound protein channels operating at small pressure differences. Pore size and chemistry in the cellular channels is defined uniformly and with sub-nanometer precision through protein folding. The thickness of these cellular membranes is limited to that of the cellular membrane bilayer, about 4 nm thick, which enhances transport. Pores in the cellular membranes are robust under operating conditions in the body. Recent efforts to mimic cellular water channels for efficient water deionization produced a significant advance in membrane function. The novel biomimetic design achieved a 10-fold increase in membrane permeability to water flow compared to commercial membranes and still maintained high salt rejection. Despite this success, there is a lack of understanding about why this membrane performs so well. To address this lack of knowledge, we used highperformance computing to interrogate the structural and chemical environments experienced by water and electrolytes in the newly created biomimetic membranes. We also compared the solvation environments between the biomimetic membrane and cellular water channels. These results will help inform future efforts to optimize and tune the performance of synthetic biomimetic membranes for applications in water purification, energy, and catalysis.

Rogers, David Michael; Rempe, Susan L. B.

2012-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "radiance synthetic imaging" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

NIST Image Gallery: Image Details  

Science Conference Proceedings (OSTI)

... 72 DPI Image © 150 DPI Image © 300 DPI Image ©. Title: Homeland Security; Chem., Bio, and Other Threats; Standards for Radiation Detection. ...

222

NIST Image Gallery: Image Details  

Science Conference Proceedings (OSTI)

... Image Gallery : Image Details. No 72 DPI Version No 150 DPI Version 300 DPI Image. Title: Gold Nano Anchors Put Nanowires in Their Place. ...

223

NIST Image Gallery: Image Details  

Science Conference Proceedings (OSTI)

... 72 DPI Image © 150 DPI Image © 300 DPI Image ©. Title: Iron-based and Copper-Oxide High-Temperature Superconductors. ...

224

Synthetic Nano-Low Density Lipoprotein as Targeted Drug Delivery Vehicle for Glioblastoma Multiforme  

E-Print Network (OSTI)

Synthetic Nano-Low Density Lipoprotein as Targeted Drugmicroemulsion; peptide; nano-low density lipoproteintherapeutic agents. A synthetic nano-LDL (nLDL) particle was

Nikanjam, Mina; Blakely, Eleanor A.; Bjornstad, Kathleen A.; Shu, Xiao; Budinger, Thomas F.; Forte, Trudy M.

2006-01-01T23:59:59.000Z

225

Slurry growth and gas retention in synthetic Hanford waste  

DOE Green Energy (OSTI)

This work seeks to establish chemical and physical processes responsible for the generation and retention of gases within waste from a particular high-level waste tank on the Hanford Site, Tank 101-SY, through the use of synthetic wastes on a laboratory scale. The goal of these activities is to support the development of mitigation/remediation strategies for Tank 101-SY. Laboratory studies of aged synthetic waste have shown that gas generation occurs thermally at a significant level at current tank temperatures. Gas compositions include the same gases produced in actual tank waste, primarily N{sub 2}, N{sub 2}O, and H{sub 2}. Gas stoichiometries have been shown to be greatly influenced by several organic and inorganic constituents within the synthetic waste. Retention of gases in the synthetic waste is in the form of bubble attachment to solid particles.

Bryan, S.A.; Pederson, L.R.; Scheele, R.D.

1992-09-01T23:59:59.000Z

226

Synthetic scaffolds and protein assemblies for engineering applications  

E-Print Network (OSTI)

S-layer proteins, which naturally self-assemble on the exterior of cells, provide an interesting basis for the creation of synthetic scaffolds. In this thesis, I created a plasmid which produces a recombinant form of a ...

Norville, Julie Erin, 1980-

2004-01-01T23:59:59.000Z

227

Slurry growth and gas retention in synthetic Hanford waste  

DOE Green Energy (OSTI)

This work seeks to establish chemical and physical processes responsible for the generation and retention of gases within waste from a particular high-level waste tank on the Hanford Site, Tank 101-SY, through the use of synthetic wastes on a laboratory scale. The goal of these activities is to support the development of mitigation/remediation strategies for Tank 101-SY. Laboratory studies of aged synthetic waste have shown that gas generation occurs thermally at a significant level at current tank temperatures. Gas compositions include the same gases produced in actual tank waste, primarily N[sub 2], N[sub 2]O, and H[sub 2]. Gas stoichiometries have been shown to be greatly influenced by several organic and inorganic constituents within the synthetic waste. Retention of gases in the synthetic waste is in the form of bubble attachment to solid particles.

Bryan, S.A.; Pederson, L.R.; Scheele, R.D.

1992-09-01T23:59:59.000Z

228

What rough beast? Synthetic Biology and the Future of Biosecurity  

E-Print Network (OSTI)

Synthetic biology seeks to create modular biological parts that can be assembled into useful devices, allowing the modification of biological systems with greater reliability, at lower cost, with greater speed, and by a ...

Mohr, Scott C.

229

Defossiling Fuel: How Synthetic Biology Can Transform Biofuel Production  

E-Print Network (OSTI)

Defossiling Fuel: How Synthetic Biology Can Transform Biofuel Production David F. Savage , Jeffrey through natural intermediates to final molecule is long, and biofuel production is perhaps the ultimate engineering, economic, political, and environmental realities. Are biofuels sustainable? Consider U

230

Estimating Urban Canopy Parameters Using Synthetic Aperture Radar Data  

Science Conference Proceedings (OSTI)

This paper introduces a remote sensing–based approach to rapidly derive urban morphological characteristics using radar satellite data. The approach is based on the expectation that the magnitude of the synthetic aperture radar (SAR) backscatter ...

Indumathi Jeyachandran; Steven J. Burian; Stephen W. Stetson

2010-04-01T23:59:59.000Z

231

Synthetic Biology Offers New Hope For Malaria Victims  

NLE Websites -- All DOE Office Websites (Extended Search)

March 24, 2004 science beat | current article | lab a-z index | lab home Synthetic Biology Offers New Hope For Malaria Victims Contact: Lynn Yarris, lcyarris@lbl.gov x-ray...

232

Retroactivity, modularity, and insulation in synthetic biology circuits  

E-Print Network (OSTI)

A central concept in synthetic biology is the reuse of well-characterized modules. Modularity simplifies circuit design by allowing for the decomposition of systems into separate modules for individual construction. Complex ...

Lin, Allen

2011-01-01T23:59:59.000Z

233

Biofuel production by in vitro synthetic enzymatic pathway biotransformation  

NLE Websites -- All DOE Office Websites (Extended Search)

49; 49; NO. OF PAGES 7 Please cite this article in press as: Zhang Y-H P., et al. Biofuel production by in vitro synthetic enzymatic pathway biotransformation, Curr Opin Biotechnol (2010), doi:10.1016/j.copbio.2010.05.005 Available online at www.sciencedirect.com Biofuel production by in vitro synthetic enzymatic pathway biotransformation Y-H Percival Zhang 1,2,3 , Jibin Sun 4 and Jian-Jiang Zhong 5 Cell-free synthetic pathway biotransformation (SyPaB) is the implementation of complicated biochemical reactions by in vitro assembling a number of enzymes or their complexes and coenzymes. Assembly of numerous enzymes without cellular membrane, gene regulation, or undesired pathway can circumvent some of the obstacles to modifying living microorganisms. Several synthetic pathways for the production of liquid biofuels - alcohols and hydrocarbon precursors (polyols)

234

Extension and Validation of a Gulf Stream Geosat Synthetic Geoid  

Science Conference Proceedings (OSTI)

An extended synthetic geoid for the western North Atlantic Ocean was constructed by employing Geosat altimeter data, concurrent dynamic model forecasts, and climatology. Estimates of the absolute dynamic topography from the altimeter were ...

David L. Porter; Scott M. Glenn; Ella B. Dobson; Michael F. Crowley

1996-04-01T23:59:59.000Z

235

Calibration of Radiances from Space  

Science Conference Proceedings (OSTI)

The authors compare the performance of broadband radiometers with spectrally dispersed measurements. Spectrally dispersed radiometers may be more accurately calibrated than is possible with broadband filter instruments. They also have a larger ...

Richard Goody; Robert Haskins

1998-04-01T23:59:59.000Z

236

Fact book: synthetic pipeline gas from coal. 1982 update  

SciTech Connect

This book illustrates the major advantages of synthetic pipeline gas from coal. Progress on many of the coal gasification projects envisioned over the past decade has been thwarted by regulatory, permitting, and financing delays. The rationale for developing a synthetic pipeline gas industry remains as strong as ever from the nation's viewpoint, and the pioneer US commercial scale high-Btu coal gasification plant is now under construction-the Great Plains coal gasification plant in North Dakota. Also, the US Synthetic Fuels Corporation is now operational and can move forward to provide the guarantees which are necessary to overcome the financial barriers to a commercial synfuels capability in the United States. Compared to other principal means of utilizing America's vast coal reserves, coal gasification uses coal and land more efficiently, uses less water, emits less air pollutants, requires less capital and results in a lower cost of energy to consumers. (DP)

Not Available

1982-01-01T23:59:59.000Z

237

Gas Turbine Combustor Performance on Synthetic Fuels, Volume 2  

Science Conference Proceedings (OSTI)

This volume presents a summary of a project to determine the effects of burning currently available coal-derived and shale-derived synthetic liquid fuels in state-of-the-art gas turbine combustors. It describes the fuels tested, the effects of NO emission and of smoke formation and reduction, and a comparison of surrogate and synthetic fuels. The project concluded that a number of selected coal and shale oil fuels can be used in current turbines as soon as these fuels become available.

1981-06-01T23:59:59.000Z

238

NIST Image Gallery: Image Details  

Science Conference Proceedings (OSTI)

... 72 DPI Image 150 DPI Image No 300 DPI Version. Title: NIST Finds that Ethanol-Loving Bacteria Accelerate Cracking of Pipeline Steels. ...

239

Composition and Biodegradation of a Synthetic Oil Spilled on the  

E-Print Network (OSTI)

characteristics. Composition and natural attenuation of the spilled aviation diesel fuel are discussed in JaraulaComposition and Biodegradation of a Synthetic Oil Spilled on the Perennial Ice Cover of LakeAeroshell500.Molecularcompositionsoftheoilswereanalyzed by gas chromatography-mass spectrometry and compared

Priscu, John C.

240

Synthetic gene design with a large number of hidden stops  

Science Conference Proceedings (OSTI)

Hidden stops are nucleotide triples TAA, TAG and TGA that appear on the second and third reading frames of a protein coding gene. Recent studies suggested the important role of hidden stops in preventing misread of mRNA. We study the problem of designing ... Keywords: back translation, bioinformatics, codons, gene design, hidden stops, mRNA, protein coding genes, synthetic biology

Vinhthuy Phan; Sudip Saha; Ashutosh Pandey; Tit-Yee Wong

2010-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "radiance synthetic imaging" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Evaluation of administrative procedures at the Synthetic Fuels Corporation  

Science Conference Proceedings (OSTI)

The Synthetic Fuels Corporation has improved its administrative procedures, but further actions are needed to strengthen contracting practices and internal financial controls. Pertinent recommendations are made in this report. This report also discusses the evolution of the Corporations's current salary structure and the activities of the Office of the Inspector General.

Not Available

1982-10-18T23:59:59.000Z

242

Directed evolution: an evolving and enabling synthetic biology tool  

E-Print Network (OSTI)

Directed evolution: an evolving and enabling synthetic biology tool Ryan E Cobb1 , Tong Si1 systems has heretofore rendered rational design prohibitively difficult. As a result, directed evolution large libraries of variants. This review highlights the most recent advances in the use of directed

Zhao, Huimin

243

2006 Special Issue: Synthetic computational models of selective attention  

Science Conference Proceedings (OSTI)

Computational modeling plays an important role to understand the mechanisms of attention. In this framework, synthetic computational models can uniquely contribute to integrate different explanatory levels and neurocognitive findings, with special reference ... Keywords: Awareness, Meditation states, Processing levels, Selective attention, Synchronization

Antonino Raffone

2006-11-01T23:59:59.000Z

244

The Measurement of Precipitation with Synthetic Aperture Radar  

Science Conference Proceedings (OSTI)

The radar equation for the measurement of precipitation by SAR is identical to that for a conventional radar. The achievable synthetic beamwidth, ?s, is proportional to ?v/U, the ratio of the spread of the precipitation Doppler spectrum to the ...

David Atlas; Richard K. Moore

1987-09-01T23:59:59.000Z

245

SPE-163690-MS Synthetic, Geomechanical Logs for Marcellus Shale  

E-Print Network (OSTI)

SPE-163690-MS Synthetic, Geomechanical Logs for Marcellus Shale M. O. Eshkalak, SPE, S. D of hydrocarbons from the reservoirs, notably shale, is attributed to realizing the key fundamentals of reservoir and mineralogy is crucial in order to identify the "right" pay-zone intervals for shale gas production. Also

Mohaghegh, Shahab

246

NIST Image Gallery: Image Details  

Science Conference Proceedings (OSTI)

... Title: Scanning tunneling microscope; Semiconductor; Spintronics. Description: [Left] A high resolution STM image of a manganese ...

247

NIST Image Gallery: Image Details  

Science Conference Proceedings (OSTI)

... Title: Nanotechnology--Nanomanufacturing; Optical Nano Vision. Description: A new optical imaging technology under ...

248

SPIE Medical Imaging Medical Imaging  

E-Print Network (OSTI)

1 SPIE Medical Imaging 2006 1 Medical Imaging Fundamentals Kenneth H. Wong, Ph.D. Division of Computer Assisted Interventions and Medical Robotics (CAIMR) Imaging Science and Information Systems (ISIS) Center Department of Radiology Georgetown University SPIE Medical Imaging 2006 2 Main Themes · Describe

Miga, Michael I.

249

Rotational Nanoactuator/Nanomotor Images and Animations  

DOE Data Explorer (OSTI)

The Zettl Research Group is an experimental solid state physics group in the Department of Physics at the University of California, Berkeley. These images and computer animations are referred to in a letter from the Group to Nature in 2003. They document the creation of what was then the world's smallest synthetic motor using a multiwall carbon nanotube. Their research won one of DOE's 2004 R&D 100 awards.

Zettle, Alex; Zettle Research Group (U.C. Berkeley and LBNL); Fennimore, Adam; Yuzvinsky, Tom; Bodzin, Noah; Han, Wei-Qiang; Fuhrer, M.S.; Cumings, J.

250

Safe, secure and ethical? : assessing and regulating risks associated with synthetic biology  

E-Print Network (OSTI)

Synthetic biology is an emerging field, with a rapidly developing academic-industrial base and the promise of extensive product launches over the next few years. An intense debate over the risks and benefits of synthetic ...

Regårdh, Pernilla C. (Pernilla Christina)

2011-01-01T23:59:59.000Z

251

Nanofabricated collagen-inspired synthetic elastomers for primary rat hepatocyte culture  

E-Print Network (OSTI)

Synthetic substrates that mimic the properties of extracellular matrix proteins hold significant promise for use in systems designed for tissue engineering applications. In this report, we designed a synthetic polymeric ...

Bettinger, Christopher J.

252

Cloud detection of MODIS multispectral images  

Science Conference Proceedings (OSTI)

Methods coming from statistics and pattern recognition to estimate the cloud mask from radiance measured by visible and infrared sensors onboard satellites are gaining greater and greater consideration for their ability to properly exploit the ...

Loredana Murino; Umberto Amato; Maria Francesca Carfora; Anestis Antoniadis; Bormin Huang; W. Paul Menzel; Carmine Serio

253

Diffuse reflectance imaging with astronomical applications  

E-Print Network (OSTI)

Diffuse objects generally tell us little about the surrounding lighting, since the radiance they reflect blurs together incident lighting from many directions. In this paper we discuss how occlusion geometry can help invert ...

Hasinoff, Samuel W.

254

Radiative Flux Estimation from a Broadband Radiometer Using Synthetic Angular Models in the EarthCARE Mission Framework. Part II: Evaluation  

Science Conference Proceedings (OSTI)

The instantaneous top-of-atmosphere (TOA) radiance-to-flux conversion for the broadband radiometer (BBR) on board the Earth Clouds, Aerosols, and Radiation Explorer (EarthCARE) was assessed in Part I of this paper, by developing theoretical ...

Carlos Domenech; Ernesto Lopez-Baeza; David P. Donovan; Tobias Wehr

2012-09-01T23:59:59.000Z

255

Synthetic nanotubes lay foundation for new technology: Artificial pores  

NLE Websites -- All DOE Office Websites (Extended Search)

Synthetic nanotubes lay foundation for new technology: Artificial pores Synthetic nanotubes lay foundation for new technology: Artificial pores mimic key features of natural pores By Tona Kunz * July 17, 2012 Tweet EmailPrint Scientists have overcome key design hurdles to expand the potential uses of nanopores and nanotubes. The creation of smart nanotubes with selective mass transport opens up a wider range of applications for water purification, chemical separation and fighting disease. Nanopores and their rolled up version, nanotubes, consist of atoms bonded to each other in a hexagonal pattern to create an array of nanometer-scale openings or channels. This structure creates a filter that can be sized to select which molecules and ions pass into drinking water or into a cell. The same filter technique can limit the release of chemical by-products

256

Pentavalent Uranium Chemistry - Synthetic Pursuit Of A Rare Oxidation State  

Science Conference Proceedings (OSTI)

This feature article presents a comprehensive overview of pentavalent uranium systems in non-aqueous solution with a focus on the various synthetic avenues employed to access this unusual and very important oxidation state. Selected characterization data and theoretical aspects are also included. The purpose is to provide a perspective on this rapidly evolving field and identify new possibilities for future developments in pentavalent uranium chemistry.

Graves, Christopher R [Los Alamos National Laboratory; Kiplinger, Jaqueline L [Los Alamos National Laboratory

2009-01-01T23:59:59.000Z

257

Directed evolution as a powerful synthetic biology tool Ryan E. Cobb a,b,1  

E-Print Network (OSTI)

Directed evolution as a powerful synthetic biology tool Ryan E. Cobb a,b,1 , Ning Sun c,1 , Huimin by Rihe Liu Keyword: Synthetic biology Directed evolution a b s t r a c t At the heart of synthetic of this approach. Directed evolution, a process which mimics Darwinian selection on a laboratory scale, has allowed

Zhao, Huimin

258

Synthetic Antimicrobial Oligomers Induce Composition-dependent Topological  

NLE Websites -- All DOE Office Websites (Extended Search)

Synthetic Antimicrobial Oligomers Induce Synthetic Antimicrobial Oligomers Induce Composition-dependent Topological Transition in Membranes The development of bacterial resistance to conventional antibiotics is a major public health concern. For example, methicillin-resistant Staphylococcus aureus (MRSA), vancomycin-resistant enterococci (VRE) and Staphylococcus aureus (VRSA) have emerged as common nosocomial (hospital-originating) infections. Circumvention of such resistance may be possi ble by emulating host defense antimicrobial peptides (AMP's), which are found in a broad range of species and have broad-spectrum antimicrobial properties. These AMP's have two structural motifs in common: they are cationic and amphipathic. It is thought that electro static interactions facilitate association of the peptide with the anionic bacterial membrane and amphiphilic interactions act to form pores in the bacterial membrane, leading to cell death. Thus, AMP's target generic characteristics common to the mem branes of many pathogenic species, and resistance to such natural defences evolves much more slowly than for conventional antibiotics. The exact molecular mechanisms by which membrane pores are formed are still not fully understood, although three major models ('barrel-stave', 'toroidal pore', 'carpet') have been proposed. Moreover, these models do not ex haustively cover all possibilities, as AMP activity is not always correlated with the loss of a permeability barrier. Understanding the structural tenden cies generated in antimicrobial-membrane interactions is an essential step to elucidating such molecular mechanisms and therefore to the pre dictive design of synthetic AMP analogs.

259

NIST Image Gallery: Image Details  

Science Conference Proceedings (OSTI)

... Title: Carbon Nanotube Measurements. Description: Scanning electron microscope image of 'cleaned' carbon nanotubes at NIST (color added for ...

260

NIST Image Gallery: Image Details  

Science Conference Proceedings (OSTI)

... Description: Engineering design image shows a cross-section of part of the planned ITER fusion reaction vessel. Diverter ...

Note: This page contains sample records for the topic "radiance synthetic imaging" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Flight path-driven mitigation of wavefront curvature effects in SAR images  

DOE Patents (OSTI)

A wavefront curvature effect associated with a complex image produced by a synthetic aperture radar (SAR) can be mitigated based on which of a plurality of possible flight paths is taken by the SAR when capturing the image. The mitigation can be performed differently for different ones of the flight paths.

Doerry, Armin W. (Albuquerque, NM)

2009-06-23T23:59:59.000Z

262

Detection of Oil Spills in SAR Images Using Wavelets and Region Growing  

E-Print Network (OSTI)

Detection of Oil Spills in SAR Images Using Wavelets and Region Growing R�GIA T. S. ARA�JO, FÁTIMA an algorithm to detect oil spills in Synthetic Aperture Radar (SAR) images that can be used to support sensing of environmental disasters. Spillage of oil in coastal waters can be a catastrophic event

de Figueiredo, Luiz Henrique

263

Image Resources  

NLE Websites -- All DOE Office Websites (Extended Search)

Mosaic of earth and sky images Mosaic of earth and sky images Image Resources Free image resources covering energy, environment, and general science. Here are some links to energy- and environment-related photographic databases. Berkeley Lab Photo Archive Berkeley Lab's online digital image collection. National Science Digital Library (NSDL) NSDL is the Nation's online library for education and research in science, technology, engineering, and mathematics. The World Bank Group Photo Library A distinctive collection of over 11,000 images that illustrate development through topics such as Agriculture, Education, Environment, Health, Trade and more. Calisphere Compiles the digital collections of libraries, museums, and cultural heritage organizations across California, and organizes them by theme, such

264

Five synthetic rubber pond liners protect against leakage and weather  

SciTech Connect

More than 137 million cu ft of pipeline quality gas is produced daily at the Great Plains Coal Gasification Project in Beulah, ND. The facility is the only commercial plant in the US which produces gaseous and liquid fuels from low-grade coal. The plant needs to recycle and reuse 100% of the organic process wastewater, requiring a complicated treatment system of cooling towers, evaporators, a liquid waste incinerator and other units, each of which has its own surge pond. In total, the plant has five surge ponds which hold near 80 million gallons. To prevent the seepage of wastewater from the surge ponds into the ground water, a liner material was needed that would fulfill several design criteria. The liner had to be resistant to degradation caused by a very wide range of temperatures and it had to have a low coefficient of expansion. Resistance to both organic and inorganic chemical substances was another key requirement. Finally, the liner material needed to be easy to seam during field installation. An elastomeric membrane liner using the synthetic rubber and reinforcing polyester scrim best met the plant's requirements. One of the primary reasons for selecting synthetic rubber was its low coefficient of expansion. Extreme seasonal weather conditions, with temperatures ranging from below zero in the winter to over 100/sup 0/F in the summer, are common in North Dakota. And because the level of wastewater in the ponds constantly varies, a liner is frequently exposed to the elements. Overall, the synthetic rubber pond liners have performed through extreme weather conditions and have proven to be a cost-effective solution to wastewater storage at the gasification project.

Weinreich, G.; Hofsess, R.; Toy, D.A.

1987-03-01T23:59:59.000Z

265

Socioeconomic impact assessment: a methodology applied to synthetic fuels  

DOE Green Energy (OSTI)

This Report is a supporting document for the Final Environmental Impact Statement, Alternative Fuels Demonstration Program, which was filed with the Council on Environmental Quality in November, 1977. It describes the methodology developed for the socioeconomic impact assessments contained in the Environmental Impact Statement, and highlights the findings. Part I of this Report explains clearly how the numbers are derived, and presents the salient planning issues. Starting with the labor force of a synthetic fuels facility, a public official, decision-maker, or student of socioeconomic impacts can use this Report to derive a reasonable set of estimates which reflect the resultant population, income, employment, land use, public facility costs, and local public revenues. Part II of this Report is the application of this methodology to synthetic fuels. Numerical estimates are given for the social and economic effects resulting from such energy technologies as coal gasification and liquefaction, oil shale, and the conversion of solid wastes and agricultural products to energy. Although the methodology is not site specific, illustrative sites, chosen from the major coal-bearing counties in the United States, have been included. This allows a user to compare the relative impacts of a given energy facility in various geographical locations and types of communities. The section on mitigating measures may be of special interest because of its treatment of problem areas and its broad range of suggested solutions. One advantage of the methodology is that it derives from a broad data base that is readily accessible: the United States Census. Another advantage is that impacts can be calculated by hand. Finally, it is applicable to a wide variety of energy technologies and not restricted to synthetic fuels.

Not Available

1978-04-01T23:59:59.000Z

266

Synthetic fossil fuel technologies: health problems and intersociety cooperation  

DOE Green Energy (OSTI)

The potential health impacts of synthetic fossil fuel products are considered mainly in terms of complex and potentially carcinogenic mixtures of polynuclear aromatic (PNA) compounds. These components of oils and tars present an especially perplexing range of problems to those concerned with health protection. The nature of these problems, such as multifactorial exposure, are discussed within a framework of current and future standards to regulate human exposure. Some activities of government agencies, national laboratories, and professional societies are described. A case can be made for pooling the resources of these groups to achieve better solutions for assessing the acceptability of the various technologies and safeguarding human health.

Gammage, R B; Turner, J E

1979-01-01T23:59:59.000Z

267

Fate of Mercury in Synthetic Gypsum Used for Wallboard Production  

Science Conference Proceedings (OSTI)

This report presents and discusses results from the project 'Fate of Mercury in Synthetic Gypsum Used for Wallboard Production', performed at five different full-scale commercial wallboard plants. Synthetic gypsum produced by wet flue gas desulfurization (FGD) systems on coal-fired power plants is commonly used in the manufacture of wallboard. This practice has long benefited the environment by recycling the FGD gypsum byproduct, which is becoming available in increasing quantities, decreasing the need to landfill this material, and increasing the sustainable design of the wallboard product. However, new concerns have arisen as recent mercury control strategies involve the capture of mercury in FGD systems. The objective of this study has been to determine whether any mercury is released into the atmosphere at wallboard manufacturing plants when the synthetic gypsum material is used as a feedstock for wallboard production. The project has been co-funded by the U.S. DOE National Energy Technology Laboratory (Cooperative Agreement DE-FC26-04NT42080), USG Corporation, and EPRI. USG Corporation is the prime contractor, and URS Group is a subcontractor. The project scope included seven discrete tasks, each including a test conducted at various USG wallboard plants using synthetic gypsum from different wet FGD systems. The project was originally composed of five tasks, which were to include (1) a base-case test, then variations representing differing power plant: (2) emissions control configurations, (3) treatment of fine gypsum particles, (4) coal types, and (5) FGD reagent types. However, Task 5,could not be conducted as planned and instead was conducted at conditions similar to Task 3. Subsequently an opportunity arose to test gypsum produced from the Task 5 FGD system, but with an additive expected to impact the stability of mercury, so Task 6 was added to the project. Finally, Task 7 was added to evaluate synthetic gypsum produced at a power plant from an additional coal type. In the project, process stacks in the wallboard plant were sampled using the Ontario Hydro method. In every task, the stack locations sampled included a gypsum dryer and a gypsum calciner. In Tasks 1 and 4 through 7, the stack of the dryer for the wet wallboard product was also tested. Also at each site, in-stream process samples were collected and analyzed for mercury concentration before and after each significant step in wallboard production. These results and process data were used to construct mercury mass balances across the wallboard plants. The results from the project showed a wide range of percentage mercury losses from the synthetic gypsum feedstocks as measured by the Ontario Hydro method at the process stacks, ranging from 2% to 55% of the mercury in the gypsum feedstock. For the tasks exceeding 10% mercury loss across the wallboard plant, most of the loss occurred across the gypsum calciner. When total wallboard emissions remained below 10%, the primary emission location varied with a much less pronounced difference in emission between the gypsum dryer, calciner and board dryer. For all seven tasks, the majority of the mercury emissions were measured to be in the elemental form (Hg{sup 0}). Overall, the measured mercury loss mass rates ranged from 0.01 to 0.17 grams of mercury per dry ton of synthetic gypsum processed, or 0.01 to 0.4 pounds of mercury released per million square feet of wallboard produced from synthetic gypsum. The Coal Combustion Product Production and Use Survey from the American Coal Ash Association (ACAA) indicate that 7,579,187 short tons of synthetic gypsum were used for wallboard production in 2006. Extrapolating the results of this study to the ACAA industry usage rate, we estimate that mercury releases from wallboard production plants in 2006 ranged between 150 to 3000 pounds for the entire U.S. wallboard industry. With only seven sets of wallboard plant measurements, it is difficult to draw firm conclusions about what variables impact the mercury loss percentages across the wallboard plants. One significant o

Jessica Sanderson

2007-12-31T23:59:59.000Z

268

Hadamard multimode optical imaging transceiver  

SciTech Connect

Disclosed is a method and system for simultaneously acquiring and producing results for multiple image modes using a common sensor without optical filtering, scanning, or other moving parts. The system and method utilize the Walsh-Hadamard correlation detection process (e.g., functions/matrix) to provide an all-binary structure that permits seamless bridging between analog and digital domains. An embodiment may capture an incoming optical signal at an optical aperture, convert the optical signal to an electrical signal, pass the electrical signal through a Low-Noise Amplifier (LNA) to create an LNA signal, pass the LNA signal through one or more correlators where each correlator has a corresponding Walsh-Hadamard (WH) binary basis function, calculate a correlation output coefficient for each correlator as a function of the corresponding WH binary basis function in accordance with Walsh-Hadamard mathematical principles, digitize each of the correlation output coefficient by passing each correlation output coefficient through an Analog-to-Digital Converter (ADC), and performing image mode processing on the digitized correlation output coefficients as desired to produce one or more image modes. Some, but not all, potential image modes include: multi-channel access, temporal, range, three-dimensional, and synthetic aperture.

Cooke, Bradly J; Guenther, David C; Tiee, Joe J; Kellum, Mervyn J; Olivas, Nicholas L; Weisse-Bernstein, Nina R; Judd, Stephen L; Braun, Thomas R

2012-10-30T23:59:59.000Z

269

NIST Image Gallery: Image Details  

Science Conference Proceedings (OSTI)

... on the availability of this image. Title: Tiny Tubes May Aid Pharmacuetical R&D. Description: NIST scientists used pairs of ...

270

NIST Image Gallery: Image Details  

Science Conference Proceedings (OSTI)

... Magneto-optical image of magnetic fields within a YBCO superconductor showing electrically ... PHY, High-Temp Superconductors See also http ...

271

NIST Image Gallery: Image Details  

Science Conference Proceedings (OSTI)

... Title: New Imaging Tool is Boon to Fuel Cell Research. ... water being produced and removed inside the maze-like solid housing of fuel cells under a ...

272

Chlorine-36 abundance in natural and synthetic perchlorate  

SciTech Connect

Perchlorate (ClO{sub 4}{sup -}) is ubiquitous in the environment. It occurs naturally as a product of atmospheric photochemical reactions, and is synthesized for military, aerospace, and industrial applications. Nitrate-enriched soils of the Atacama Desert (Chile) contain high concentrations of natural ClO{sub 4}{sup -}; nitrate produced from these soils has been exported worldwide since the mid-1800's for use in agriculture. The widespread introduction of synthetic and agricultural ClO{sub 4}{sup -} into the environment has complicated attempts to understand the geochemical cycle of ClO{sub 4}{sup -}. Natural ClO{sub 4}{sup -} samples from the southwestern United States have relatively high {sup 36}Cl abundances ({sup 36}Cl/Cl = 3,100 x 10{sup -15} to 28,800 x 10{sup -15}), compared with samples of synthetic ({sup 36}Cl/Cl = 0.0 x 10{sup -15} to 40 x 10{sup -15}) and Atacama Desert ({sup 36}Cl/Cl = 0.9 x 10{sup -15} to 590 x 10{sup -15}) ClO{sub 4}{sup -}. These data give a lower limit for the initial {sup 36}Cl abundance of natural ClO{sub 4}{sup -} and provide temporal and other constraints on its geochemical cycle.

Heikoop, Jeffrey M [Los Alamos National Laboratory; Dale, M [NON LANL; Sturchio, Neil C [UNIV OF ILLIONOIS; Caffee, M [PURDUE UNIV; Belosa, A D [UNIV OF ILLINOIS; Heraty, Jr., L J [UNIV OF ILLINOIS; Bohike, J K [RESTON, VA; Hatzinger, P B [SHAW ENIVIORNMENTAL C0.; Jackson, W A [TEXAS TECH; Gu, B [ORNL

2009-01-01T23:59:59.000Z

273

Photoinitiated electron transfer in multichromophoric species: Synthetic tetrads and pentads  

DOE Green Energy (OSTI)

This project involves the design, synthesis and study of molecules which mimic some of the important aspects of photosynthetic electron and energy transfer. This research project is leading to a better understanding of the energy conserving steps of photosynthesis via the study of synthetic model systems which abstract features of the natural photosynthetic apparatus. The knowledge gained from these studies will aid in the design of artificial photosynthetic reaction centers which employ the basic chemistry and physics of photosynthesis to help meet mankind`s energy needs. The approach to artificial photosynthesis employed in this project is to use synthetic pigments, electron donors, and electron acceptors similar to those found in biological reaction centers, but to replace the protein component with covalent bonds. These chemical linkages determine the electronic coupling between the various moieties by controlling separation, relative orientation, and overlap of electronic orbitals. The model systems are designed to mimic the following aspects of natural photosynthetic electron transfer: electron donation from a tetrapyrrole excited single state, electron transfer between tetrapyrroles, electron transfer from tetrapyrroles to quinones, and electron transfer between quinones with different redox properties. In addition, they mimic carotenoid antenna function in photosynthesis (singlet-singlet energy transfer from carotenoid polyenes to chlorophyll) and carotenoid photoprotection from singlet oxygen damage (triplet-triplet energy transfer from chlorophyll to carotenoids).

NONE

1993-03-01T23:59:59.000Z

274

Journal of Biological Engineering BioMed Central Review Authentic teaching and learning through synthetic biology  

E-Print Network (OSTI)

which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Synthetic biology is an emerging engineering discipline that, if successful, will allow wellcharacterized biological components to be predictably and reliably built into robust organisms that achieve specific functions. Fledgling efforts to design and implement a synthetic biology curriculum for undergraduate students have shown that the co-development of this emerging discipline and its future practitioners does not undermine learning. Rather it can serve as the lynchpin of a synthetic biology curriculum. Here I describe educational goals uniquely served by synthetic biology teaching, detail ongoing curricula development efforts at MIT, and specify particular aspects of the emerging field that must develop rapidly in order to best train the next generation of synthetic biologists. Review Teaching opportunities and challenges specific to synthetic biology "Plant a carrot get a carrot, not a Brussels sprout " sings a musical theater character in The Fantasticks [1], aptly contrasting

Natalie Kuldell

2007-01-01T23:59:59.000Z

275

Fate of Mercury in Synthetic Gypsum Used for Wallboard Production  

SciTech Connect

This report presents and discusses results from Task 6 of the study 'Fate of Mercury in Synthetic Gypsum Used for Wallboard Production,' performed at a full-scale commercial wallboard plant. Synthetic gypsum produced by wet flue gas desulfurization (FGD) systems on coal-fired power plants is commonly used in the manufacture of wallboard. This practice has long benefited the environment by recycling the FGD gypsum byproduct, which is becoming available in increasing quantities, decreasing the need to landfill this material, and increasing the sustainable design of the wallboard product. However, new concerns have arisen as recent mercury control strategies involve the capture of mercury in FGD systems. The objective of this study is to determine whether any mercury is released into the atmosphere when the synthetic gypsum material is used as a feedstock for wallboard production. The project is being co-funded by the U.S. DOE National Energy Technology Laboratory (Cooperative Agreement DE-FC26-04NT42080), USG Corporation, and EPRI. USG Corporation is the prime contractor, and URS Group is a subcontractor. The project scope now includes six discrete tasks, each conducted at various USG wallboard plants using synthetic gypsum from different FGD systems. The project was originally composed of five tasks, which were to include (1) a baseline test, then variations representing differing power plant: (2) emissions control configurations, (3) treatment of fine gypsum particles, (4) coal types, and (5) FGD reagent types. However, Task 5, which was to include testing with an alternate FGD reagent, could not be conducted as planned. Instead, Task 5 was conducted at conditions similar to Task 3, although with gypsum from an alternate FGD system. Subsequent to conducting Task 5 under these revised conditions, an opportunity arose to test gypsum produced at the same FGD system, but with an additive (Degussa Corporation's TMT-15) being used in the FGD system. TMT-15 was expected to impact the stability of mercury in synthetic gypsum used to produce wallboard, so Task 6 was added to the project to test this theory. In this project, process stacks in the wallboard plant have been sampled using the Ontario Hydro method. For every task, the stack locations sampled have included a dryer for the wet gypsum as it enters the plant and a gypsum calciner. For Tasks 1, 4, 5 and 6, the stack of the dryer for the wet wallboard product was also tested. Also at each site, in-stream process samples were collected and analyzed for mercury concentration before and after each significant step in wallboard production. The Ontario Hydro results, process sample mercury concentration data, and process data were used to construct mercury mass balances across the wallboard plants. Task 6 was conducted at a wallboard plant processing synthetic gypsum from a power plant that fires Eastern bituminous coal. The power plant has a single-loop, open spray tower limestone forced oxidation FGD system, with the forced oxidation conducted in the reaction tank integral with the FGD absorber. The FGD system has gypsum fines blow down as part of the dewatering step. The power plant is equipped with a selective catalytic reduction (SCR) system for NOX emissions control, and the SCR was in service during the time period the gypsum tested was produced. Also, as mentioned above, Degussa additive TMT-15 was being added to the FGD system when this gypsum was produced. The results of the Task 6 stack testing, as measured by the Ontario Hydro method, detected that an average of 55% of the incoming mercury was emitted during wallboard production. These losses were distributed as about 4% across the dryer mill, 6% across the board dryer kiln, and 45% across the kettle calciner. Emissions were similar to what Task 5 results showed on a percentage basis, but about 30% lower on a mass basis. The same power plant FGD system produced the synthetic gypsum used in Task 5 (with no use of TMT-15) and in Task 6 (with TMT-15 added to the FGD system). The lower emissions on a mass basis appeared

Jessica Sanderson; Gary M. Blythe; Mandi Richardson

2006-12-01T23:59:59.000Z

276

Fate of Mercury in Synthetic Gypsum Used for Wallboard Production  

Science Conference Proceedings (OSTI)

This report presents and discusses results from Task 6 of the study 'Fate of Mercury in Synthetic Gypsum Used for Wallboard Production,' performed at a full-scale commercial wallboard plant. Synthetic gypsum produced by wet flue gas desulfurization (FGD) systems on coal-fired power plants is commonly used in the manufacture of wallboard. This practice has long benefited the environment by recycling the FGD gypsum byproduct, which is becoming available in increasing quantities, decreasing the need to landfill this material, and increasing the sustainable design of the wallboard product. However, new concerns have arisen as recent mercury control strategies involve the capture of mercury in FGD systems. The objective of this study is to determine whether any mercury is released into the atmosphere when the synthetic gypsum material is used as a feedstock for wallboard production. The project is being co-funded by the U.S. DOE National Energy Technology Laboratory (Cooperative Agreement DE-FC26-04NT42080), USG Corporation, and EPRI. USG Corporation is the prime contractor, and URS Group is a subcontractor. The project scope now includes six discrete tasks, each conducted at various USG wallboard plants using synthetic gypsum from different FGD systems. The project was originally composed of five tasks, which were to include (1) a baseline test, then variations representing differing power plant: (2) emissions control configurations, (3) treatment of fine gypsum particles, (4) coal types, and (5) FGD reagent types. However, Task 5, which was to include testing with an alternate FGD reagent, could not be conducted as planned. Instead, Task 5 was conducted at conditions similar to Task 3, although with gypsum from an alternate FGD system. Subsequent to conducting Task 5 under these revised conditions, an opportunity arose to test gypsum produced at the same FGD system, but with an additive (Degussa Corporation's TMT-15) being used in the FGD system. TMT-15 was expected to impact the stability of mercury in synthetic gypsum used to produce wallboard, so Task 6 was added to the project to test this theory. In this project, process stacks in the wallboard plant have been sampled using the Ontario Hydro method. For every task, the stack locations sampled have included a dryer for the wet gypsum as it enters the plant and a gypsum calciner. For Tasks 1, 4, 5 and 6, the stack of the dryer for the wet wallboard product was also tested. Also at each site, in-stream process samples were collected and analyzed for mercury concentration before and after each significant step in wallboard production. The Ontario Hydro results, process sample mercury concentration data, and process data were used to construct mercury mass balances across the wallboard plants. Task 6 was conducted at a wallboard plant processing synthetic gypsum from a power plant that fires Eastern bituminous coal. The power plant has a single-loop, open spray tower limestone forced oxidation FGD system, with the forced oxidation conducted in the reaction tank integral with the FGD absorber. The FGD system has gypsum fines blow down as part of the dewatering step. The power plant is equipped with a selective catalytic reduction (SCR) system for NOX emissions control, and the SCR was in service during the time period the gypsum tested was produced. Also, as mentioned above, Degussa additive TMT-15 was being added to the FGD system when this gypsum was produced. The results of the Task 6 stack testing, as measured by the Ontario Hydro method, detected that an average of 55% of the incoming mercury was emitted during wallboard production. These losses were distributed as about 4% across the dryer mill, 6% across the board dryer kiln, and 45% across the kettle calciner. Emissions were similar to what Task 5 results showed on a percentage basis, but about 30% lower on a mass basis. The same power plant FGD system produced the synthetic gypsum used in Task 5 (with no use of TMT-15) and in Task 6 (with TMT-15 added to the FGD system). The lower emissions on a mass basis appeared

Jessica Sanderson; Gary M. Blythe; Mandi Richardson

2006-12-01T23:59:59.000Z

277

Nanometric Optical Imaging Frontiers in Chemical Imaging  

E-Print Network (OSTI)

Nanometric Optical Imaging Frontiers in Chemical Imaging Seminar Series Presented by... Professor thermal imaging, chemical delivery and other new horizons. Finally, as part of this lecture, Lewis

278

Images, Video, & More  

NLE Websites -- All DOE Office Websites (Extended Search)

Images, Video, & More Images BABAR Design drawings SLAC Image Gallery: BABAR SLAC Image Gallery: Aerial photos Videos Public lecture on "ANTIMATTER: What is it and where did it...

279

Synthetic Spectra and Light Curves of Interacting Binaries and Exoplanets with Circumstellar Material: SHELLSPEC  

E-Print Network (OSTI)

Program SHELLSPEC is designed to calculate light-curves, spectra and images of interacting binaries and extrasolar planets immersed in a moving circumstellar environment which is optically thin. It solves simple radiative transfer along the line of sight in moving media. The assumptions include LTE and optional known state quantities and velocity fields in 3D. Optional (non)transparent objects such as a spot, disc, stream, jet, ufo, shell or stars may be defined (embedded) in 3D and their composite synthetic spectrum calculated. Roche model can be used as a boundary condition for the radiative transfer. Recently a new model of the reflection effect, dust and Mie scattering were incorporated into the code. $\\epsilon$ Aurigae is one of the most mysterious objects on the sky. Prior modeling of its light-curve assumed dark, inclined, disk of dust with the central hole to explain the light-curve with a sharp mid-eclipse brightening. Our model consists of two geometrically thick flared disks. Internal optically thi...

Budaj, Jan

2011-01-01T23:59:59.000Z

280

Stability of Mullite and V2O3 in Synthetic Slags Based on Molten ...  

Science Conference Proceedings (OSTI)

Symposium, Materials in Clean Power Systems VI: Clean Coal-, Hydrogen ... In this study, synthetic slags simulating coal-petcoke ash mixtures were evaluated ...

Note: This page contains sample records for the topic "radiance synthetic imaging" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Molecular Interactions of Plutonium(VI) with Synthetic Manganese-Substituted Goethite  

E-Print Network (OSTI)

E. , Thesis, Reactions of Plutonium(VI) with the Iron Oxideof Uranium, Neptunium, Plutonium, Americium and Technetium;Molecular Interactions of Plutonium(VI) with Synthetic

Hu, Yung-Jin

2011-01-01T23:59:59.000Z

282

Numerical Simulation of Flame-Vortex Interactions in Natural and Synthetic Gas Mixtures .  

E-Print Network (OSTI)

??The interactions between laminar premixed flames and counter-rotating vortex pairs in natural and synthetic gas mixtures have been computationally investigated through the use of Direct… (more)

Weiler, Justin D.

2004-01-01T23:59:59.000Z

283

Evaluation of the Maximum Cross-Correlation Method of Estimating Sea Surface Velocities from Sequential Satellite Images  

Science Conference Proceedings (OSTI)

We evaluate the method of estimating sea surface velocities from sequences of AVHRR and CZCS images using the maximum cross-correlation (MCC) technique. A set of synthetic images is created by advecting an AVHRR-SST field with a QG model velocity ...

Robin Tokmakian; P. Ted Strub; Julie McClean-Padman

1990-12-01T23:59:59.000Z

284

Economic regulation and the commercialization of synthetic gas  

Science Conference Proceedings (OSTI)

The history of the Great Plains coal-gasification plant (proposed for Mercer Co., N.D.) illuminates the role of economic regulation in commercializing new energy technologies. Even though sponsors of such projects seek to ensure cost recovery and profit in advance via the regulatory process, the regulators are reluctant to provide more than partial assurance. Future economic-regulatory entities will have to develop better criteria for deciding which synthetic-gas projects will have access to rolled-in pricing. At least in the near term, most high-Btu manufactured gas will require cross-subsidization by other lower priced gas sources in order to be competitive economically; this makes advance approval of rolled-in pricing crucial to the pace and extent of syngas's market penetration. Regulatory agencies must also address the structure of escalation clauses and price ceilings.

Hall, G.R.

1981-11-05T23:59:59.000Z

285

Composite synthetic roofing structure with integral solar collector  

Science Conference Proceedings (OSTI)

A form-molded synthetic foam roofing section or structure is described, having a solar-collecting insert or panel incorporated therein with a relatively broad undersurface and an exposed surface configured to resemble interlocked and overlapping roofing shingles which are united to support a surface such as wood, metal, etc. During the molding process. The roofing structure may be affixed by any conventional means, such as nails or adhesives, to roof boards, rafters or over old existing roof structures with adjacent roofing sections interconnected by appropriate inlets and outlets for the solar panel insert. Solar heat-collecting fluid may be circulated through the solar panel inserts in a conventional manner. Connecting tubes are provided for connecting the solar panel inserts in adjacent roofing sections and terminal connectors are compatible with all circulating systems.

Gould, W.M.

1981-06-16T23:59:59.000Z

286

SAR Image: Niwot Ridge (Long term Ecological  

NLE Websites -- All DOE Office Websites (Extended Search)

Image: Baltimore Ecosystem study (BES1), Image: Baltimore Ecosystem study (BES1), 2009-07-28 SAR Image: Niwot Ridge (Long term Ecological Research Site in Colorado), 2010-12-14 ORNL DAAC News ORNL DAAC News SUMMER 2011 T he ORNL Distrib- uted Active Archive Center (DAAC) is a NASA-sponsored source for biogeochemical and ecological data and services useful i n e n v i r o n m e n t a l research. The ORNL D A A C c u r r e n t l y archives and distributes greater than 900 prod- ucts categorized as Field Campaign, Land Validation, Regional and Global, or Model Archive. Please visit us online at http://daac.ornl.gov for a comprehensive description of data, and tools available from the ORNL DAAC. Archived news can be found at http://daac.ornl.gov/ news.shtml. http://www.nasa.gov * Synthetic Aperture Radar (SAR) Subsets

287

Fluoride-containing wastewater converted to synthetic fluorspar  

Science Conference Proceedings (OSTI)

In the manufacture of uranium hexafluoride, sulfur hexafluoride, iodine pentafluoride, and antimony pentafluoride, the Allied Corporation's Metropolis Works (Metropolis, IL) generates approximately 250,000 gpd of process wastewater which contains substantial amounts of soluble fluoride. Most of the wastewater is also acidic. Alkaline waste and hydrated lime (calcium hydroxide) in a pair of neutralizers are used to precipitate the soluble fluoride as calcium fluoride. Due to the alkalinity, the material is considered a hazardous waste. The limited availability of land suitable for the construction of impoundment basins and the potential for eventual seepage from the basins presented a challenge to the management and technical staff at the Metropolis Works situation on-site. Efforts were directed toward developing a process to convert the calcium fluoride waste into a useful product. Excess lime waste could be converted to 90% CaF/sub 2/ by neutralizing the lime with hydrofluoric acid. The 90% CaF/sub 2/, closely resembling fluorspar, would be able to be used directly at other Allied plants as a substitute for natural fluorspar in the production of anhydrous hydrofluoric (AHF) acid. Engineering efforts to design a full-scale plant for the recovery of CaF/sub 2/ began in mid-1980. Construction of the plant begin in July, 1981. Since startup in mid-1982, the full scale recovery plant has been in continuous operation. Design capacity is 8000 tons/yr of synthetic fluorspar. The synthetic fluorspar is directly replacing an equivalent amount of imported natural fluorspar in the production of anhydrous hydrofluoric acid. Total cost to construct the CaF/sub 2/ recovery plant was $4.3 million. Currently realized cost savings of about $1 million/yr give the project an expected payback period of under five years.

Cipolla, A.J.; Shields, E.J.; Wickersham, C.P.; Toy, D.A.

1985-11-01T23:59:59.000Z

288

Nonlinear image filtering within IDP++  

Science Conference Proceedings (OSTI)

IDP++, image and data processing in C++, is a set of a signal processing libraries written in C++. It is a multi-dimension (up to four dimensions), multi-data type (implemented through templates) signal processing extension to C++. IDP++ takes advantage of the object-oriented compiler technology to provide ``information hiding.`` Users need only know C, not C++. Signals or data sets are treated like any other variable with a defined set of operators and functions. We here some examples of the nonlinear filter library within IDP++. Specifically, the results of MIN, MAX median, {alpha}-trimmed mean, and edge-trimmed mean filters as applied to a real aperture radar (RR) and synthetic aperture radar (SAR) data set.

Lehman, S.K.; Wieting, M.G.; Brase, J.M.

1995-02-09T23:59:59.000Z

289

NIST Image Gallery: Image Details  

Science Conference Proceedings (OSTI)

... from the bright glare in the distance transmit images of a cat-like face at ... Though false color has been added to the cats faces, they are otherwise ...

290

NIST Image Gallery: Image Details  

Science Conference Proceedings (OSTI)

... a href http://www.nist.gov/public_affairs/images/Nanopore 20device.avi See video /a PHY, DARPA, spectroscopy See also http://www.nist.gov/pml ...

291

Fate of Mercury in Synthetic Gypsum Used for Wallboard Production  

SciTech Connect

This report presents and discusses results from Task 5 of the study ''Fate of Mercury in Synthetic Gypsum Used for Wallboard Production,'' performed at a full-scale commercial wallboard plant. Synthetic gypsum produced by wet flue gas desulfurization (FGD) systems on coal-fired power plants is commonly used in the manufacture of wallboard. The FGD process is used to control the sulfur dioxide emissions which would result in acid rain if not controlled. This practice has long benefited the environment by recycling the FGD gypsum byproduct, which is becoming available in increasing quantities, decreasing the need to landfill this material, and increasing the sustainable design of the wallboard product. However, new concerns have arisen as recent mercury control strategies developed for power plants involve the capture of mercury in FGD systems. The objective of this study is to determine whether any mercury is released into the atmosphere when the synthetic gypsum material is used as a feedstock for wallboard production. The project is being co-funded by the U.S. DOE National Energy Technology Laboratory (Cooperative Agreement DE-FC26-04NT42080), USG Corporation, and EPRI. USG Corporation is the prime contractor, and URS Group is a subcontractor. The project scope includes five discrete tasks, each conducted at various USG wallboard plants using synthetic gypsum from different FGD systems. The five tasks were to include (1) a baseline test, then variations representing differing power plant (2) emissions control configurations, (3) treatment of fine gypsum particles, (4) coal types, and (5) FGD reagent types. However, Task 5, which was to evaluate gypsum produced from an alternate FGD reagent, could not be conducted as planned. Instead, Task 5 was conducted at conditions similar to a previous task, Task 3, although with gypsum from an alternate FGD system. In this project, process stacks in the wallboard plant have been sampled using the Ontario Hydro method. The stack locations sampled for each task include a dryer for the wet gypsum as it enters the plant and a gypsum calciner. The stack of the dryer for the wet wallboard product was also tested as part of this task, and was tested as part of Tasks 1 and 4. Also at each site, in-stream process samples were collected and analyzed for mercury concentration before and after each significant step in wallboard production. The Ontario Hydro results, process sample mercury concentration data, and process data were used to construct mercury mass balances across the wallboard plants. Task 5 was conducted at a wallboard plant processing synthetic gypsum from a power plant that fires Eastern bituminous coal. The power plant is equipped with a selective catalytic reduction (SCR) system for NOX emissions control, but the SCR was bypassed during the time period the gypsum tested was produced. The power plant has a single-loop, open spray tower, limestone reagent FGD system, with forced oxidation conducted in a reaction tank integral with the FGD absorber. The FGD system has gypsum fines blow down as part of the dewatering step. Gypsum fines blow down is believed to be an important variable that impacts the amount of mercury in the gypsum byproduct and possibly its stability during the wallboard process. The results of the Task 5 stack testing, as measured by the Ontario Hydro method, detected that an average of 51% of the incoming mercury in the FGD gypsum was emitted during wallboard production. These losses were distributed as 2% or less each across the wet gypsum dryer and product wallboard dryer, and about 50% across the gypsum calciner. Emissions were similar to what Task 3 results showed, on both a percentage and a mass basis, for gypsum produced by a power plant firing bituminous coal and also having gypsum fines blow down as part of the FGD dewatering scheme. As was seen in the Task 1 through 4 results, most of the mercury detected in the stack testing on the wet gypsum dryer and kettle calciner was in the form of elemental mercury. In the wallboard dryer kiln, a more signific

Jessica Marshall Sanderson

2006-06-01T23:59:59.000Z

292

ForPeerReview From vegetable oils to polyurethanes: synthetic routes to  

E-Print Network (OSTI)

From vegetable oils to polyurethanes: synthetic routes to polyols and main industrial products Myriam and main industrial products Most of biobased polyols for polyurethanes are synthesized from vegetable oils literature; focus on the industrial synthetic routes. Keywords: vegetable oils; biobased polyols

Paris-Sud XI, Université de

293

Ris-PhD-27(EN) Wind Energy Applications of Synthetic  

E-Print Network (OSTI)

Risø-PhD-27(EN) Wind Energy Applications of Synthetic Aperture Radar Merete Bruun Christiansen Risø National Laboratory Roskilde Denmark November 2006 #12;Author: Merete Bruun Christiansen Title: Wind Energy Applications of Synthetic Aperture Radar Department: Wind Energy Department Risø-PhD-27(EN) November 2006

294

History Images  

NLE Websites -- All DOE Office Websites (Extended Search)

History Images History Images Los Alamos History in Images Los Alamos has a proud history and heritage of almost 70 years of science and innovation. The people of the Laboratory work on advanced technologies to provide the best scientific and engineering solutions to many of the nation's most crucial security challenges. Click thumbnails to enlarge. Photos arranged by most recent first, horizontal formats before vertical. See Flickr for more sizes and details. Back in the day Back in the day LA bridge in Los Alamos LA bridge in Los Alamos 1945 Army-Navy "E" Award 1945 Army-Navy "E" Award Louis Rosen Louis Rosen Bob Van Ness Robert Kuckuck and Michael Anastasio Bob Van Ness Robert Kuckuck and Michael Anastasio TA-18 TA-18 Elmer Island TU-4 assembly area Elmer Island TU-4 assembly area

295

Skin carcinogenicity of synthetic and natural petroleums. [Mice  

DOE Green Energy (OSTI)

In a series of three separate experiments mice were exposed to various concentrations of fossil liquids obtained from coal, oil shale or natural petroleum. All materials were capable of inducing squamous cell carcinoma, but potency differed substantially. Skin carcinogenicity was markedly greater for both coal or oil shale liquids than for natural petroleums. None of the syncrudes approached the skin carcinogenicity of a pure reference carcinogen, benzo(a)pyrene (BP). It is unlikely that determination of the concentration of an active compound in material applied to the test animal will allow meaningful comparison among the diverse agents of interest to the synthetic fuels industry. To better establish the relationship between actual tissue dose and surface concentration the authors are investigating various in vitro and biochemical measures of hydrocarbon-skin interaction to determine which, if any, could serve as a more definitive measure of surface dose. Results, using BP as a marker carcinogenic hydrocarbon, suggest that carcinogenic crudes inhibit both BP metabolism in skin organ culture and the interaction of BP adducts with epidermal DNA, in vivo.

Holland, J.M.; Rahn, R.O.; Smith, L.H.; Clark, B.R.; Chang, S.S.; Stephens, T.J.

1979-09-01T23:59:59.000Z

296

Retrieval of Ice Cloud Parameters Using a Microwave Imaging Radiometer  

Science Conference Proceedings (OSTI)

Based on the radiative transfer theory, the microwave radiance emanating from ice clouds at arbitrary viewing angles is expressed as an analytic function of the cloud ice water path (IWP), the particle effective diameter (De), and the particle ...

Fuzhong Weng; Norman C. Grody

2000-04-01T23:59:59.000Z

297

Imaging bolometer  

DOE Patents (OSTI)

Radiation-hard, steady-state imaging bolometer. A bolometer employing infrared (IR) imaging of a segmented-matrix absorber of plasma radiation in a cooled-pinhole camera geometry is described. The bolometer design parameters are determined by modeling the temperature of the foils from which the absorbing matrix is fabricated by using a two-dimensional time-dependent solution of the heat conduction equation. The resulting design will give a steady-state bolometry capability, with approximately 100 Hz time resolution, while simultaneously providing hundreds of channels of spatial information. No wiring harnesses will be required, as the temperature-rise data will be measured via an IR camera. The resulting spatial data may be used to tomographically investigate the profile of plasmas.

Wurden, Glen A. (Los Alamos, NM)

1999-01-01T23:59:59.000Z

298

Imaging bolometer  

DOE Patents (OSTI)

Radiation-hard, steady-state imaging bolometer is disclosed. A bolometer employing infrared (IR) imaging of a segmented-matrix absorber of plasma radiation in a cooled-pinhole camera geometry is described. The bolometer design parameters are determined by modeling the temperature of the foils from which the absorbing matrix is fabricated by using a two-dimensional time-dependent solution of the heat conduction equation. The resulting design will give a steady-state bolometry capability, with approximately 100 Hz time resolution, while simultaneously providing hundreds of channels of spatial information. No wiring harnesses will be required, as the temperature-rise data will be measured via an IR camera. The resulting spatial data may be used to tomographically investigate the profile of plasmas. 2 figs.

Wurden, G.A.

1999-01-19T23:59:59.000Z

299

Imaging Spectrometry of Tropospheric Ozone and Water Vapor  

E-Print Network (OSTI)

Imaging spectrometry has the potential of remotely detecting atmospheric trace gases on the basis of their absorption of radiation. Ozone absorbs particulary in the ultraviolet and visible range of the spectrum, whereas water vapor has strong absorption features in the near infrared. Hence, spectrometry is expected to be a promising tool to extract these trace gas contents in a given air column by using the correlation between cumulative trace gas amount and absorption strength in the sensor channels located in the absorption bands. New mathematical methods of channel selection and method evaluation for measuring atmospheric trace gases are presented. Three already known and four new differential absorption techniques are evaluated by using MODTRAN2 simulations of the radiance spectrum at the sensor level and an analytical error propagation analysis. Finally, the best methods and channel combinations are selected and applied to AVIRIS data of Central Switzerland. The spatial ozone distribution could be estimated over water in a qualitative manner, whereas the total column water vapor content could be quantified over land with an accuracy of about 6%.

Daniel Schläpfer; Klaus I. Itten; Johannes Keller

1995-01-01T23:59:59.000Z

300

Synthetic Nano-Low Density Lipoprotein as Targeted Drug DeliveryVehicle for Glioblastoma Multiforme  

SciTech Connect

This paper discribes a synthetic low density lipoprotein(LDL) made by complexing a 29 amino acid that consists of a lipid bindingdomain and the LDL receptor binding domain with a lipid microemulsion.The nano-LDL particles were intermdiate in size between LDL and HDL andbound to LDL receptors on GBM brain tumor cells. Synthetic nano-LDLuptake by GBM cells was LDL receptor specific and dependent on cellreceptor number. It is suggested that these synthetic particles can serveas a delivery vehicle for hydophobic anti-tumor drugs by targeting theLDL receptor.

Nikanjam, Mina; Blakely, Eleanor A.; Bjornstad, Kathleen A.; Shu,Xiao; Budinger, Thomas F.; Forte, Trudy M.

2006-06-14T23:59:59.000Z

Note: This page contains sample records for the topic "radiance synthetic imaging" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Zenith Radiance Retrieval of Cloud Properties  

NLE Websites -- All DOE Office Websites (Extended Search)

retrievals of cloud properties retrievals of cloud properties from the AMF/COPS campaign Preliminary retrievals of cloud properties from the AMF/COPS campaign Christine Chiu, UMBC/JCET Alexander Marshak, GSFC Yuri Knyazikhin, Boston University Warren Wiscombe, GSFC Christine Chiu, UMBC/JCET Alexander Marshak, GSFC Yuri Knyazikhin, Boston University Warren Wiscombe, GSFC The cloud optical properties of interest are: The cloud optical properties of interest are: * Cloud optical depth τ - the great unknown * Radiative cloud fraction * Cloud effective drop size, r eff * Cloud optical depth τ - the great unknown * Radiative cloud fraction * Cloud effective drop size, r eff τ = 3 2 LWP r eff r eff in μm, LWP in g/m 2 The 2-ch narrow-field-of-view radiometer (2NFOV) The 2-ch narrow-field-of-view radiometer

302

Precomputed radiance transfer: theory and practice  

Science Conference Proceedings (OSTI)

Interactive rendering of realistic objects under general lighting models poses three principal challenges. Handling complex light transport phenomena like shadows, inter-reflections, caustics and sub-surface scattering is difficult to do in real time. ...

Jan Kautz; Peter-Pike Sloan; Jaakko Lehtinen

2005-07-01T23:59:59.000Z

303

Reflected Solar Radiances from Regional Scale Scenes  

Science Conference Proceedings (OSTI)

A set of bi-directional reflectance models is presented for various atmospheric scene types. The models were composited from data collected from an aircraft platform in May-July 1979 during Summer MONEX. The space scale of the composited models ...

John M. Davis; Stephen K. Cox

1982-11-01T23:59:59.000Z

304

BioJADE: A Design and Simulation Tool for Synthetic Biological Systems  

E-Print Network (OSTI)

The next generations of both biological engineering and computer engineering demand that control be exerted at the molecular level. Creating, characterizing and controlling synthetic biological systems may provide us ...

Goler, Jonathan A.

2004-05-28T23:59:59.000Z

305

The Use of Synthetic Hurricane Tracks in Risk Analysis and Climate Change Damage Assessment  

Science Conference Proceedings (OSTI)

Because of the lack of data on past hurricanes, empirical evaluations of the statistics needed for risk management are very uncertain. An alternative strategy is to use a hurricane model to produce large sets of synthetic hurricane tracks. This ...

Stéphane Hallegatte

2007-11-01T23:59:59.000Z

306

Synthetic Subsurface Pressure Derived from Bottom Pressure and Tide Gauge Observations  

Science Conference Proceedings (OSTI)

Synthetic subsurface pressure (SSP) can be formed from tide gauge records and from bottom pressure measurements to provide a consistent and convenient basis for comparison of these two different types of observations. Common methods for this ...

Sabine Harms; Clinton D. Winant

1994-12-01T23:59:59.000Z

307

Interbilayer-crosslinked multilamellar vesicles as synthetic vaccines for potent humoral and cellular immune responses  

E-Print Network (OSTI)

Vaccines based on recombinant proteins avoid the toxicity and antivector immunity associated with live vaccine (for example, viral) vectors, but their immunogenicity is poor, particularly for CD8+ T-cell responses. Synthetic ...

Moon, James J.

308

Assimilation of Synthetic Tropical Cyclone Observations into the Navy Operational Global Atmospheric Prediction System  

Science Conference Proceedings (OSTI)

In June 1990, the assimilation of synthetic tropical cyclone observations into the Navy Operational Global Atmospheric Prediction System (NOGAPS) was initiated at Fleet Numerical Oceanography Center (FNOC). These observations are derived directly ...

James S. Goerss; Richard A. Jeffries

1994-12-01T23:59:59.000Z

309

Strategies for designing, testing and demonstrating safety : what synthetic biology can learn from retrospective cases  

E-Print Network (OSTI)

Synthetic biology is an emerging technology field within the realm of genetic engineering, differing from traditional genetic engineering in that it focuses on the modularization of genetic parts and the creation of de ...

Yeddanapudi, Neelima, 1976-

2009-01-01T23:59:59.000Z

310

Use of Synthetic Aperture Radar in Finescale Surface Analysis of Synoptic-Scale Fronts at Sea  

Science Conference Proceedings (OSTI)

The viability of synthetic aperture radar (SAR) as a tool for finescale marine meteorological surface analyses of synoptic-scale fronts is demonstrated. In particular, it is shown that SAR can reveal the presence of, and the mesoscale and ...

G. S. Young; T. N. Sikora; N. S. Winstead

2005-06-01T23:59:59.000Z

311

Realistic assessment of direct radiolysis for synthetic fuels production using fusion radiation sources  

DOE Green Energy (OSTI)

These studies indicate that synthetic fuel production by direct radiolysis cannot compete economically with other production methods. Low G-values and radiation contamination of products are given as reasons. (MOW)

Pendergrass, J.H.; Booth, L.A.; Finch, F.T.; Frank, T.G.

1979-01-01T23:59:59.000Z

312

The Generation of Synthetic Sea Surface Temperature Data for the Equatorial Pacific Ocean  

Science Conference Proceedings (OSTI)

Synthetic monthly SST anomaly data are constructed using frequency domain analyses of significant principle components derived from reconstructed SST data in the equatorial Pacific Ocean. The model provides insight into the dominant physical ...

J. M. Caron; J. J. O’Brien

1998-11-01T23:59:59.000Z

313

Synthetic Aperture Radar as a Tool for Investigating Polar Mesoscale Cyclones  

Science Conference Proceedings (OSTI)

Polar mesoscale cyclones are intense vortices that form in cold, marine air masses poleward of major jet streams and frontal zones. Synthetic aperture radar (SAR) should be considered as a potential tool for the study of polar mesoscale cyclones ...

Todd D. Sikora; Karen S. Friedman; William G. Pichel; Pablo Clemente-Colón

2000-12-01T23:59:59.000Z

314

Use of Synthetic Data to Test Flight Patterns for a Boundary Layer Field Experiment  

Science Conference Proceedings (OSTI)

A virtual research aircraft was flown through a synthetic atmospheric boundary layer to help design a real flight plan that would allow robust turbulence statistics to be obtained in a heterogeneous, evolving, convective boundary layer. The ...

Edi Santoso; Roland Stull

1999-09-01T23:59:59.000Z

315

The synthetic multivulva genes and their suppressors regulate opposing cell fates through chromatin remodeling  

E-Print Network (OSTI)

The synthetic multivulva (synMuv) genes act redundantly to inhibit vulval fates in Caenorhabditis elegans. These genes are grouped into three classes called A, B and C. The class A genes encode putative transcription ...

Andersen, Erik C

2008-01-01T23:59:59.000Z

316

Design Methodology for Development of Behavioral Synthesis Generic and Synthetic Benchmarks  

E-Print Network (OSTI)

The importance of benchmarking as an essential methodology in evaluating and comparing digital systems synthesis tools is well established. Equally well are the limitations of the majority of current benchmarks recognized. Our primary goal is to lay out the theoretically and statistically sound foundations for addressing the key issues related to the selection of generic benchmarks and the synthesis and analysis of statistical synthetic benchmarks. The methodology for the synthetic benchmark generation uses as an intermediate step the methodology for the generic benchmark selection. The benefits of our methodology for the generic benchmark selection are: (1) it provides the sound statistical foundations for the generic benchmark selection, (2) it establishes the fact that the development of a generic benchmark is a well-defined optimization problem. The advantages of the statistical synthetic benchmarks over the generic benchmarks include: (1) having an unlimited supply of synthetic design examples, (2) obtaining the real-life like design examples which suit a particular design or analysis need, (3) having a test set which better fits all available real-life design examples. Due to the fact that the synthetic benchmark generation is based on the generic benchmark selection, the entire process of the generic and synthetic benchmark development is in sequence. It consists of the following five-stages: (1) collecting and analyzing real life design examples, (2) extracting and selecting the relevant properties that are used to specify designs, (3) deriving a generic benchmark set from the real life design examples, (4) developing the synthetic benchmark generator, and (5) constructing a synthetic benchmark set for the current applications or the future applications based ...

Hm Ar Ks

1996-01-01T23:59:59.000Z

317

System and method for forming synthetic protein crystals to determine the conformational structure by crystallography  

DOE Patents (OSTI)

A method for forming synthetic crystals of proteins in a carrier fluid by use of the dipole moments of protein macromolecules that self-align in the Helmholtz layer adjacent to an electrode. The voltage gradients of such layers easily exceed 10.sup.6 V/m. The synthetic protein crystals are subjected to x-ray crystallography to determine the conformational structure of the protein involved.

Craig, George D. (Lafayette, CA); Glass, Robert (Livermore, CA); Rupp, Bernhard (Dublin, CA)

1997-01-01T23:59:59.000Z

318

Process for gasification using a synthetic CO.sub.2 acceptor  

DOE Patents (OSTI)

A gasification process is disclosed using a synthetic CO.sub.2 acceptor consisting essentially of at least one compound selected from the group consisting of calcium oxide and calcium carbonate supported in a refractory carrier matrix, the carrier having the general formula Ca.sub.5 (SiO.sub.4).sub.2 CO.sub.3. A method for producing the synthetic CO.sub.2 acceptor is also disclosed.

Lancet, Michael S. (Pittsburgh, PA); Curran, George P. (Pittsburgh, PA)

1980-01-01T23:59:59.000Z

319

System and method for forming synthetic protein crystals to determine the conformational structure by crystallography  

DOE Patents (OSTI)

A method is disclosed for forming synthetic crystals of proteins in a carrier fluid by use of the dipole moments of protein macromolecules that self-align in the Helmholtz layer adjacent to an electrode. The voltage gradients of such layers easily exceed 10{sup 6}V/m. The synthetic protein crystals are subjected to x-ray crystallography to determine the conformational structure of the protein involved. 2 figs.

Craig, G.D.; Glass, R.; Rupp, B.

1997-01-28T23:59:59.000Z

320

Systems studies of dual purpose electric/synthetic fuels fusion plants  

SciTech Connect

A reactor power plant is proposed that can meet base load electrical demand, while the remainder can generate synthetic fuels and meet intermittent electrical demands. Two principal objectives of this study are: (1) to examine how strongly various economic demand and resource factors affect the amount of installed CTR capacity, and (2) to examine what increase in CTR capacity can be expected with dual purpose electric/synthetic fuel fusion plants, and also the relative importance of the different production modes. (MOW)

Beardsworth, E.; Powell, J.

1975-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "radiance synthetic imaging" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

New synthetic derivatives of triterpenoids in the treatment of cancer  

E-Print Network (OSTI)

Methyl 2-cyano-3,11-dioxo-18?-olean-1,12-dien-30-oate (?-CDODA-Me) and methyl 2-cyano-3,11-dioxo-18?-olean-1,12-dien-30-oate (?-CDODA-Me ) isomers are synthetic analogs of the naturally occurring triterpenoid glycyrrhetinic acid. The activity of these compounds as selective peroxisome proliferator-activated receptor ? (PPAR?) agonists and as cytotoxic anticancer agents has been investigated in colon, prostate and pancreatic cancer cells. In colon cancer cells ?-CDODA-Me arrested the growth at G2/M and this was accompanied by decreased expression of Sp1, Sp3 and Sp4 protein and mRNA and several Sp-dependent genes including survivin, vascular endothelial growth factor (VEGF), and VEGF receptor 1 (VEGFR1 or Flt-1). ?-CDODA-Me also inhibited tumor growth in athymic nude mice bearing RKO cells as xenografts. ?- CDODA-Me decreased expression of microRNA-27a (miR-27a), and this was accompanied by increased expression of two miR-27a-regulated mRNAs, namely ZBTB10 (an Sp repressor) and Myt-1 which catalyzes phosphorylation of cdc2 to inhibit progression of cells through G2/M. In LNCaP prostate cancer cells induction of two proapoptotic proteins namely nonsteroidal anti-inflammatory drug- activated gene-1 (NAG-1) and activating transcription factor-3 (ATF-3) was PPAR? independent and required activation of kinases. ?-CDODA-Me also decreased the levels of androgen receptor (AR) and prostate-specific antigen (PSA) mRNA and protein levels. Thus the cytotoxicity of ?- CDODA-Me involved multiple pathways that selectively activate growth inhibitory and proapoptotic responses. Betulinic acid (BA), an inhibitor of melanoma is a pentacyclic triterpenoid natural product that induces apoptosis and antiangiogenic responses in tumors derived from multiple tissues. However, the underlying mechanism of action of BA is unknown. In LNCaP prostate cancer cells, BA acts as a novel anticancer agent by inducing proteasome-dependent repression of Sp proteins and Sp- dependent genes. The anticancer activity of the 2-cyano substituted analogs of BA, CN-BA and its methyl ester, CN-BA-Me was also investigated in colon and pancreatic cancer cells. Both CNBA and CN-BA-Me were highly cytotoxic and activated PPAR? and induced several receptor-mediated responses. The results clearly demonstrated that both the PPAR? agonist activities of CN-BA and CN-BA-Me were structure-, response-/gene- and cell context-dependent suggesting that these compounds are a novel class of selective PPAR? modulators with potential for clinical treatment of prostate, colon and pancreatic cancer.

Papineni, Sabitha

2008-12-01T23:59:59.000Z

322

Interactions of Jet Fuels with Nitrile O-Rings: Petroleum-Derived versus Synthetic Fuels  

SciTech Connect

A transition from petroleum~derived jet fuels to blends with Fischer-Tropsch (F~T) fuels, and ultimately fully synthetic hydro-isomerized F-T fuels has raised concern about the fate of plasticizers in nitrile-butadiene rubber a-rings that are contacted by the fuels as this transition occurs. The partitioning of plasticizers and fuel molecules between nitrile a-rings and petroleum-derived, synthetic, and additized-synthetic jet fuels has been measured. Thermal desorption of o-rings soaked in the various jet fuels followed by gas chromatographic analysis with a mass spectrometric detector showed many of the plasticizer and stabilizer compounds were removed from the o-rings regardless of the contact fuel. Fuel molecules were observed to migrate into the o-rings for the petroleum-derived fuel as did both the fuel and additive for a synthetic F-T jet fuel additized with benzyl alcohol, but less for the unadditized synthetic fuel. The specific compounds or classes of compounds involved in the partitioning were identified and a semiquantitative comparison of relative partitioning of the compounds of interest was made. The results provide another step forward in improving the confidence level of using additized, fully synthetic jet fuel in the place of petroleum-derived fuel.

Gormley, R.J.; Link, D.D.; Baltrus, J.P.; Zandhuis, P.H.

2009-01-01T23:59:59.000Z

323

Interactions of Jet Fuels with Nitrile O-Rings: Petroleum-Derived versus Synthetic Fuels  

SciTech Connect

A transition from petroleum-derived jet fuels to blends with Fischer-Tropsch (F-T) fuels, and ultimately fully synthetic hydro-isomerized F-T fuels has raised concern about the fate of plasticizers in nitrile-butadiene rubber o-rings that are contacted by the fuels as this transition occurs. The partitioning of plasticizers and fuel molecules between nitrile o-rings and petroleum-derived, synthetic, and additized-synthetic jet fuels has been measured. Thermal desorption of o-rings soaked in the various jet fuels followed by gas chromatographic analysis with a mass spectrometric detector showed many of the plasticizer and stabilizer compounds were removed from the o-rings regardless of the contact fuel. Fuel molecules were observed to migrate into the o-rings for the petroleum-derived fuel as did both the fuel and additive for a synthetic F-T jet fuel additized with benzyl alcohol, but less for the unadditized synthetic fuel. The specific compounds or classes of compounds involved in the partitioning were identified and a semiquantitative comparison of relative partitioning of the compounds of interest was made. The results provide another step forward in improving the confidence level of using additized, fuIly synthetic jet fuel in the place of petroleum-derived fueL

Gormley, R.J.; Link, D.D.; Baltrus, J.P.; Zandhuis, P.H.

2008-01-01T23:59:59.000Z

324

Procedure for matching synfuel users with potential suppliers. Appendix B. Proposed and ongoing synthetic fuel production projects  

DOE Green Energy (OSTI)

To assist the Department of Energy, Office of Fuels Conversion (OFC), in implementing the synthetic fuel exemption under the Powerplant and Industrial Fuel Use Act (FUA) of 1978, Resource Consulting Group, Inc. (RCG), has developed a procedure for matching prospective users and producers of synthetic fuel. The matching procedure, which involves a hierarchical screening process, is designed to assist OFC in: locating a supplier for a firm that wishes to obtain a synthetic fuel exemption; determining whether the fuel supplier proposed by a petitioner is technically and economically capable of meeting the petitioner's needs; and assisting the Synthetic Fuels Corporation or a synthetic fuel supplier in evaluating potential markets for synthetic fuel production. A data base is provided in this appendix on proposed and ongoing synthetic fuel production projects to be used in applying the screening procedure. The data base encompasses a total of 212 projects in the seven production technologies.

None

1981-08-07T23:59:59.000Z

325

Evaluating fusion techniques for multi-sensor satellite image data  

SciTech Connect

Satellite image data fusion is a topic of interest in many areas including environmental monitoring, emergency response, and defense. Typically any single satellite sensor cannot provide all of the benefits offered by a combination of different sensors (e.g., high-spatial but low spectral resolution vs. low-spatial but high spectral, optical vs. SAR). Given the respective strengths and weaknesses of the different types of image data, it is beneficial to fuse many types of image data to extract as much information as possible from the data. Our work focuses on the fusion of multi-sensor image data into a unified representation that incorporates the potential strengths of a sensor in order to minimize classification error. Of particular interest is the fusion of optical and synthetic aperture radar (SAR) images into a single, multispectral image of the best possible spatial resolution. We explore various methods to optimally fuse these images and evaluate the quality of the image fusion by using K-means clustering to categorize regions in the fused images and comparing the accuracies of the resulting categorization maps.

Martin, Benjamin W [ORNL; Vatsavai, Raju [ORNL

2013-01-01T23:59:59.000Z

326

Geologic interpretation of space shuttle radar images of Indonesia  

SciTech Connect

The National Aeronautics and Space Administration (NASA) space shuttle mission in November 1981 acquired images of parts of the earth with a synthetic aperture radar system at a wavelength of 23.5 cm (9.3 in.) and spatial resolution of 38 m (125 ft). This report describes the geologic interpretation of 1:250,000-scale images of Irian Jaya and eastern Kalimantan, Indonesia, where the all-weather capability of radar penetrates the persistent cloud cover. The inclined look direction of radar enhances subtle topographic features that may be the expression of geologic structures. On the Indonesian images, the following terrain categories are recognizable for geologic mapping: carbonate, clastic, volcanic, alluvial and coastal, melange, and metamorphic, as well as undifferentiated bedrock. Regional and local geologic structures are well expressed on the images.

Sabing, F.F.

1983-11-01T23:59:59.000Z

327

FM DANTE fast imaging and variations: emerging rf-based ultrafast imaging techniques  

Science Conference Proceedings (OSTI)

Keywords: DANTE fast imaging, NMR, burst imaging, fast chemical shift imaging, fast imaging, fast spectroscopic imaging, fast susceptibility imaging

Z. H. Cho; Y. M. Ro; I. K. Hong

1998-01-01T23:59:59.000Z

328

Unmixing hyperspectral images using Markov random fields  

SciTech Connect

This paper proposes a new spectral unmixing strategy based on the normal compositional model that exploits the spatial correlations between the image pixels. The pure materials (referred to as endmembers) contained in the image are assumed to be available (they can be obtained by using an appropriate endmember extraction algorithm), while the corresponding fractions (referred to as abundances) are estimated by the proposed algorithm. Due to physical constraints, the abundances have to satisfy positivity and sum-to-one constraints. The image is divided into homogeneous distinct regions having the same statistical properties for the abundance coefficients. The spatial dependencies within each class are modeled thanks to Potts-Markov random fields. Within a Bayesian framework, prior distributions for the abundances and the associated hyperparameters are introduced. A reparametrization of the abundance coefficients is proposed to handle the physical constraints (positivity and sum-to-one) inherent to hyperspectral imagery. The parameters (abundances), hyperparameters (abundance mean and variance for each class) and the classification map indicating the classes of all pixels in the image are inferred from the resulting joint posterior distribution. To overcome the complexity of the joint posterior distribution, Markov chain Monte Carlo methods are used to generate samples asymptotically distributed according to the joint posterior of interest. Simulations conducted on synthetic and real data are presented to illustrate the performance of the proposed algorithm.

Eches, Olivier; Dobigeon, Nicolas; Tourneret, Jean-Yves [University of Toulouse, IRIT/INP-ENSEEIHT, 2 rue Camichel, 31071 Toulouse cedex 7 (France)

2011-03-14T23:59:59.000Z

329

Textureless Macula Swelling Detection with Multiple Retinal Fundus Images  

SciTech Connect

Retinal fundus images acquired with non-mydriatic digital fundus cameras are a versatile tool for the diagnosis of various retinal diseases. Because of the ease of use of newer camera models and their relatively low cost, these cameras can be employed by operators with limited training for telemedicine or Point-of-Care applications. We propose a novel technique that uses uncalibrated multiple-view fundus images to analyse the swelling of the macula. This innovation enables the detection and quantitative measurement of swollen areas by remote ophthalmologists. This capability is not available with a single image and prone to error with stereo fundus cameras. We also present automatic algorithms to measure features from the reconstructed image which are useful in Point-of-Care automated diagnosis of early macular edema, e.g., before the appearance of exudation. The technique presented is divided into three parts: first, a preprocessing technique simultaneously enhances the dark microstructures of the macula and equalises the image; second, all available views are registered using non-morphological sparse features; finally, a dense pyramidal optical flow is calculated for all the images and statistically combined to build a naiveheight- map of the macula. Results are presented on three sets of synthetic images and two sets of real world images. These preliminary tests show the ability to infer a minimum swelling of 300 microns and to correlate the reconstruction with the swollen location.

Giancardo, Luca [ORNL; Meriaudeau, Fabrice [ORNL; Karnowski, Thomas Paul [ORNL; Tobin Jr, Kenneth William [ORNL; Grisan, Enrico [University of Padua, Padua, Italy; Favaro, Paolo [Heriot-Watt University, Edinburgh; Ruggeri, Alfredo [University of Padua, Padua, Italy; Chaum, Edward [University of Tennessee, Knoxville (UTK)

2010-01-01T23:59:59.000Z

330

Split image optical display  

DOE Patents (OSTI)

A video image is displayed from an optical panel by splitting the image into a plurality of image components, and then projecting the image components through corresponding portions of the panel to collectively form the image. Depth of the display is correspondingly reduced.

Veligdan, James T. (Manorville, NY)

2007-05-29T23:59:59.000Z

331

BMC Systems Biology BioMed Central Commentary Models for synthetic biology  

E-Print Network (OSTI)

which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Synthetic biological engineering is emerging from biology as a distinct discipline based on quantification. The technologies propelling synthetic biology are not new, nor is the concept of designing novel biological molecules. What is new is the emphasis on system behavior. The objective is the design and construction of new biological devices and systems to deliver useful applications. Numerous synthetic gene circuits have been created in the past decade, including bistable switches, oscillators, and logic gates, and possible applications abound, including biofuels, detectors for biochemical and chemical weapons, disease diagnosis, and gene therapies. More than fifty years after the discovery of the molecular structure of DNA, molecular biology is mature enough for real quantification that is useful for biological engineering applications, similar to the revolution in modeling in chemistry in the 1950s. With the excitement that synthetic biology is generating, the engineering and biological science communities appear remarkably willing to cross disciplinary boundaries toward a common goal. Synthetic biological engineering is emerging from biology

Yiannis N Kaznessis

2007-01-01T23:59:59.000Z

332

Comparison of Nonlinear Model Results Using Modified Recorded and Synthetic Ground Motions  

Science Conference Proceedings (OSTI)

A study has been performed that compares results of nonlinear model runs using two sets of earthquake ground motion time histories that have been modified to fit the same design response spectra. The time histories include applicable modified recorded earthquake ground motion time histories and synthetic ground motion time histories. The modified recorded earthquake ground motion time histories are modified from time history records that are selected based on consistent magnitude and distance. The synthetic ground motion time histories are generated using appropriate Fourier amplitude spectrums, Arias intensity, and drift correction. All of the time history modification is performed using the same algorithm to fit the design response spectra. The study provides data to demonstrate that properly managed synthetic ground motion time histories are reasonable for use in nonlinear seismic analysis.

Robert E. Spears; J. Kevin Wilkins

2011-11-01T23:59:59.000Z

333

Synthetic and alternate fuels characterization. Final report, 31 August 1981-31 January 1988  

DOE Green Energy (OSTI)

Diesel fuels derived from petroleum and synthetic sources were compared chemically and toxicologically to address the issue of whether a changeover of mobility fuels from natural to synthetic sources might be accompanied by greater or different toxicological hazards to military personnel. Diesel fuels derived from petroleum, shale oil, tar sands, and tar sands/petroleum coprocessing were compared for major organic composition, 4-6 ring polycyclic aromatic hydrocarbon dermal tumorigens, major organic compounds in their inhalable volatiles, mouse dermal tumorigenicity and promoting activity. The data base was expanded by a similar comparison of petroleum- and coal-derived fuels for the U.S. Department of Energy (USDOE). The results suggest that highly refined and finished mobility fuels from synthetic or alternate sources will not pose a significantly greater toxicological hazard than current petroleum-based fuels. Toxicological differences are likely to be subtle.

Griest, W.H.; Guerin, M.R.; Smith, L.H.; Witschi, H.P.; Higgins, C.E.

1988-02-01T23:59:59.000Z

334

Imaging earth's interior: Tomographic inversions for mantle P-wave velocity structure  

SciTech Connect

A formalism is developed for the tomographic inversion of seismic travel time residuals. The travel time equations are solved both simultaneously, for velocity model terms and corrections to the source locations, and progressively, for each set of terms in succession. The methods differ primarily in their treatment of source mislocation terms. Additionally, the system of equations is solved directly, neglecting source terms. The efficacy of the algorithms is explored with synthetic data as we perform simulations of the general procedure used to produce tomographic images of Earth's mantle from global earthquake data. The patterns of seismic heterogeneity in the mantle that would be returned reliably by a tomographic inversion are investigated. We construct synthetic data sets based on real ray sampling of the mantle by introducing spherical harmonic patterns of velocity heterogeneity and perform inversions of the synthetic data.

Pulliam, R.J.

1991-07-01T23:59:59.000Z

335

Inversion of Synthetic Aperture Radar Interferograms for Sources of Production-Related Subsidence at the Dixie Valley Geothermal Field  

DOE Green Energy (OSTI)

We used synthetic aperture radar interferograms to image ground subsidence that occurred over the Dixie Valley geothermal field during different time intervals between 1992 and 1997. Linear elastic inversion of the subsidence that occurred between April, 1996 and March, 1997 revealed that the dominant sources of deformation during this time period were large changes in fluid volumes at shallow depths within the valley fill above the reservoir. The distributions of subsidence and subsurface volume change support a model in which reduction in pressure and volume of hot water discharging into the valley fill from localized upflow along the Stillwater range frontal fault is caused by drawdown within the upflow zone resulting from geothermal production. Our results also suggest that an additional source of fluid volume reduction in the shallow valley fill might be similar drawdown within piedmont fault zones. Shallow groundwater flow in the vicinity of the field appears to be controlled on the NW by a mapped fault and to the SW by a lineament of as yet unknown origin.

Foxall, W; Vasco, D

2003-02-07T23:59:59.000Z

336

Multicolor Underwater Imaging Techniques.  

E-Print Network (OSTI)

??Studies were conducted on multispectral polarimetric subtraction imaging techniques for underwater imaging that use a broadband light source. The main objective of this study was… (more)

Waggoner, Douglas Scott

2007-01-01T23:59:59.000Z

337

Emissions from Buses with DDC 6V92 Engines Using Synthetic Diesel Fuel  

DOE Green Energy (OSTI)

Synthetic diesel fuel can be made from a variety of feedstocks, including coal, natural gas and biomass. Synthetic diesel fuels can have very low sulfur and aromatic content, and excellent autoignition characteristics. Moreover, synthetic diesel fuels may also economically competitive with California diesel fuel if .roduced in large volumes. Previous engine laboratory and field tests using a heavy-duty chassis dynamometer indicate that synthetic diesel fuel made using the Fischer-Tropsch (F-T) catalytic conversion process is a promising alternative fuel, because it can be used in unmodified diesel engines, and can reduce exhaust emissions substantially. The objective of this study was a preliminary assessment of the emissions from older model transit operated on Mossgas synthetic diesel fuel. The study compared emissions from transit buses operating on Federal no. 2 Diesel fuel, Mossgas synthetic diesel (MGSD), and a 50/50 blend of the two fuels. The buses were equipped with unmodified Detroit Diesel 6V92 2-stroke diesel engines. Six 40-foot buses were tested. Three of the buses had recently rebuilt engines and were equipped with an oxidation catalytic converter. Vehicle emissions measurements were performed using West Virginia University's unique transportable chassis dynamometer. The emissions were measured over the Central Business District (CBD) driving cycle. The buses performed well on both neat and blended MGSD fuel. Three buses without catalytic converters were tested. Compared to their emissions when operating on Federal no. 2 diesel fuel, these buses emitted an average of 5% lower oxides of nitrogen (NOx) and 20% lower particulate matter (PM) when operating on neat MGSD fuel. Catalyst equipped buses emitted an average of 8% lower NOx and 31% lower PM when operating on MGSD than when operating on Federal no. 2 diesel fuel.

Paul Norton; Keith Vertin; Nigel N. Clark; Donald W. Lyons; Mridul Gautam; Stephen Goguen; James Eberhardt

1999-05-03T23:59:59.000Z

338

Thermo-economic assessment of CO2 separation technologies in the framework of synthetic natural gas (SNG) production.  

E-Print Network (OSTI)

??Synthetic Natural Gas (SNG) is one of the alternative fuels that can be produced from biomass. Its potential advantages are the possibility of mixing with… (more)

Alamia, Alberto

2010-01-01T23:59:59.000Z

339

Carotenoids & Retinoids; Molecular Aspects and Health IssuesChapter 14 Mitochondria as Novel Targets for Proapoptotic Synthetic Retinoids  

Science Conference Proceedings (OSTI)

Carotenoids & Retinoids; Molecular Aspects and Health Issues Chapter 14 Mitochondria as Novel Targets for Proapoptotic Synthetic Retinoids Health Nutrition Biochemistry eChapters Health - Nutrition - Biochemistry Press  ...

340

Study of comfort properties of natural and synthetic knitted fabrics in different blend ratios for winter active sportswear.  

E-Print Network (OSTI)

??The objective of the present study is to produce base layer winter active sportswear fabrics using natural and synthetic fibres and their blends which will… (more)

Wardiningsih, W

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "radiance synthetic imaging" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

A Bayesian Approach for Image Segmentation with Shape Priors  

SciTech Connect

Color and texture have been widely used in image segmentation; however, their performance is often hindered by scene ambiguities, overlapping objects, or missingparts. In this paper, we propose an interactive image segmentation approach with shape prior models within a Bayesian framework. Interactive features, through mouse strokes, reduce ambiguities, and the incorporation of shape priors enhances quality of the segmentation where color and/or texture are not solely adequate. The novelties of our approach are in (i) formulating the segmentation problem in a well-de?ned Bayesian framework with multiple shape priors, (ii) ef?ciently estimating parameters of the Bayesian model, and (iii) multi-object segmentation through user-speci?ed priors. We demonstrate the effectiveness of our method on a set of natural and synthetic images.

Chang, Hang; Yang, Qing; Parvin, Bahram

2008-06-20T23:59:59.000Z

342

Final Scientific/Technical Report Grant title: Use of ARM Measurements of Spectral Zenith Radiance for Better Understanding of 3D Cloud-Radiation Processes and Aerosol-Cloud Interaction This is a collaborative project with the NASA GSFC project of Dr. A. Marshak and W. Wiscombe (PIs). This report covers BU activities from February 2011 to June 2011 and BU "Â?no-cost extension" activities from June 2011 to June 2012. This report summarizes results that complement a final technical report submitted by the PIs in 2011.  

SciTech Connect

Main results are summarized for work in these areas: spectrally-invariant approximation within atmospheric radiative transfer; spectral invariance of single scattering albedo for water droplets and ice crystals at weakly absorbing wavelengths; seasonal changes in leaf area of Amazon forests from leaf flushing and abscission; and Cloud droplet size and liquid water path retrievals from zenith radiance measurements.

Knyazikhin, Y

2012-09-10T23:59:59.000Z

343

Mining partially annotated images  

Science Conference Proceedings (OSTI)

In this paper, we study the problem of mining partially annotated images. We first define what the problem of mining partially annotated images is, and argue that in many real-world applications annotated images are typically partially annotated and ... Keywords: image annotation completion and prediction, partially annotated training set, semi-supervised learning

Zhongang Qi; Ming Yang; Zhongfei (Mark) Zhang; Zhengyou Zhang

2011-08-01T23:59:59.000Z

344

Seismic Imaging and Monitoring  

SciTech Connect

I give an overview of LANL's capability in seismic imaging and monitoring. I present some seismic imaging and monitoring results, including imaging of complex structures, subsalt imaging of Gulf of Mexico, fault/fracture zone imaging for geothermal exploration at the Jemez pueblo, time-lapse imaging of a walkway vertical seismic profiling data for monitoring CO{sub 2} inject at SACROC, and microseismic event locations for monitoring CO{sub 2} injection at Aneth. These examples demonstrate LANL's high-resolution and high-fidelity seismic imaging and monitoring capabilities.

Huang, Lianjie [Los Alamos National Laboratory

2012-07-09T23:59:59.000Z

345

Seismic Imaging and Monitoring  

SciTech Connect

I give an overview of LANL's capability in seismic imaging and monitoring. I present some seismic imaging and monitoring results, including imaging of complex structures, subsalt imaging of Gulf of Mexico, fault/fracture zone imaging for geothermal exploration at the Jemez pueblo, time-lapse imaging of a walkway vertical seismic profiling data for monitoring CO{sub 2} inject at SACROC, and microseismic event locations for monitoring CO{sub 2} injection at Aneth. These examples demonstrate LANL's high-resolution and high-fidelity seismic imaging and monitoring capabilities.

Huang, Lianjie [Los Alamos National Laboratory

2012-07-09T23:59:59.000Z

346

Compatibility of Admix and Synthetic Liner Materials With Clean Coal Technology By-Products  

Science Conference Proceedings (OSTI)

When designing effective liner systems for clean coal technology by-products, utilities need information on the liner materials most suitable for each type of waste by-product. This study has developed data on twenty admix and synthetic liner types for seven different by-product combinations.

1991-03-29T23:59:59.000Z

347

Shrinking selves in synthetic sites: Onpersonhood in a Walt Disney World  

Science Conference Proceedings (OSTI)

In this essay we show how certain tendencies of the self are enhanced and hindered by technologically organized places. We coordinate a cognitive and behavioral technology for the control of personal identity with the technologically totalized environments ... Keywords: Csikszentmihalyi, self, self-shrinkage, synthetic sites

Charles W. Harvey; Carol Zibell

2000-05-01T23:59:59.000Z

348

Hydraphiles: a rigorously studied class of synthetic channel compounds with in vivo activity  

Science Conference Proceedings (OSTI)

Hydraphiles are a class of synthetic ion channels that now have a twenty-year history of analysis and success. In early studies, these compounds were rigorously validated in a wide range of in vitro assays including liposomal ion flow detected by NMR ...

Saeedeh Negin, Bryan A. Smith, Alexandra Unger, W. Matthew Leevy, George W. Gokel

2013-01-01T23:59:59.000Z

349

Moving target indication via RADARSAT-2 multichannel synthetic aperture radar processing  

Science Conference Proceedings (OSTI)

With the recent launches of the German TerraSAR-X and the Canadian RADARSAT-2, both equipped with phased array antennas and multiple receiver channels, synthetic aperture radar, ground moving target indication (SAR-GMTI) data are now routinely being ...

S. Chiu; M. V. Dragoševi?

2010-01-01T23:59:59.000Z

350

Proceedings: Conference on Coal Gasification Systems and Synthetic Fuels for Power Generation, Volumes 1 and 2  

Science Conference Proceedings (OSTI)

The international effort to develop synthetic fuels and advanced power systems for the commercial generation of electric power from coal, oil shale, and tar sands has been an outstanding technical success. This conference highlighted the work that brought new fuels and power generation systems to reality.

1986-01-01T23:59:59.000Z

351

Proceedings of symposium on operation and maintenance of synthetic gas plants  

SciTech Connect

The Symposium on Operation and Maintenance of Synthetic Gas Plants sponsored by the Gas Processors Association and the American Petroleum Institute (Division of Refining) was held at the Statler Hilton Hotel, Dallas, Texas, October 10, 1973. Four papers have been entered individually into EDB. (LTN)

1973-01-01T23:59:59.000Z

352

Will Kentucky lead the way in synthetic fuels production? A history lesson  

Science Conference Proceedings (OSTI)

At four times in the history of the United States, synthetic fuels have been used as the energy savior of the country, from the period immediately following the second World War to the mid 1980s when the Synthetic Fuels Corporation was unceremoniously demolished by the Reagan administration. The Center for Applied Energy Research at the University of Kentucky has been a major player in the game and the state of Kentucky has received much funding for synthetic fuels development since the 1970s. The article traces the history of developments in the field. The fate of the development has in the author's opinion been influenced by the misalignment of three 'spheres of influence' - in essence the political economy, environmental/regulatory issues, and the technological innovation process. Synthetic fuels can now become an integral part of what is called a 'multiplex energy strategy' and Kentucky again has the opportunity to build on its prior experience and embrace a new paradigm regarding how clean energy solutions based on gasification technologies can aid the USA. 4 photos.

Musulin, M.

2008-07-01T23:59:59.000Z

353

Manhattan Project: Trinity Images  

Office of Scientific and Technical Information (OSTI)

IMAGES IMAGES Trinity Test Site (July 16, 1945) Resources > Photo Gallery The first 0.11 seconds of the Nuclear Age These seven photographs of the Trinity test were taken by time-lapse cameras. The last is 109 milliseconds, or 0.109 seconds, after detonation. Scroll down to view each individual image. The photographs are courtesy the Los Alamos National Laboratory, via the Federation of American Scientists web site. The animation is original to the Office of History and Heritage Resources. The dawn of the Nuclear Age (Trinity image #1) The dawn of the Nuclear Age Trinity image #2 Trinity image #3 Trinity image #4 Trinity image #5 Trinity, 0.09 seconds after detonation (Trinity image #6) Trinity, 0.09 seconds after detonation Trinity, 0.11 seconds after detonation (Trinity image #7)

354

Web accessible image similarity measurements  

Science Conference Proceedings (OSTI)

Web accessible image similarity measurements. Background: There ... messages). Web Access to Image Similarity Measurements. ...

2013-04-16T23:59:59.000Z

355

Meta-analysis of Genomic and Proteomic Features to Predict Synthetic Lethality of Yeast and Human Cancer  

Science Conference Proceedings (OSTI)

A major goal in cancer medicine is to find selective drugs with reduced side-effect. A pair of genes is called synthetic lethality (SL) if mutations of both genes will kill a cell while mutation of either gene alone will not. Hence, a gene in SL interactions ... Keywords: Cancer, Classification, Comparative genomics, Meta-analysis, Synthetic lethality, TCGA

Min Wu, Xuejuan Li, Fan Zhang, Xiaoli Li, Chee-Keong Kwoh, Jie Zheng

2013-09-01T23:59:59.000Z

356

Image registration method for medical image sequences  

DOE Patents (OSTI)

Image registration of low contrast image sequences is provided. In one aspect, a desired region of an image is automatically segmented and only the desired region is registered. Active contours and adaptive thresholding of intensity or edge information may be used to segment the desired regions. A transform function is defined to register the segmented region, and sub-pixel information may be determined using one or more interpolation methods.

Gee, Timothy F.; Goddard, James S.

2013-03-26T23:59:59.000Z

357

Modeling Aspects and Computational Methods for Some Recent Problems of Tomographic Imaging  

E-Print Network (OSTI)

In this dissertation, two recent problems from tomographic imaging are studied, and results from numerical simulations with synthetic data are presented. The first part deals with ultrasound modulated optical tomography, a method for imaging interior optical properties of partially translucent media that combines optical contrast with ultrasound resolution. The primary application is the optical imaging of soft tissue, for which scattering and absorption rates contain important functional and structural information about the physiological state of tissue cells. We developed a mathematical model based on the diffusion approximation for photon propagation in highly scattering media. Simple reconstruction schemes for recovering optical absorption rates from boundary measurements with focused ultrasound are presented. We show numerical reconstructions from synthetic data generated for mathematical absorption phantoms. The results indicate that high resolution imaging with quantitatively correct values of absorption is possible. Synthetic focusing techniques are suggested that allow reconstruction from measurements with certain types of non-focused ultrasound signals. A preliminary stability analysis for a linearized model is given that provides an initial explanation for the observed stability of reconstruction. In the second part, backprojection schemes are proposed for the detection of small amounts of highly enriched nuclear material inside 3D volumes. These schemes rely on the geometrically singular structure that small radioactive sources represent, compared to natural background radiation. The details of the detection problem are explained, and two types of measurements, collimated and Compton-type measurements, are discussed. Computationally, we implemented backprojection by counting the number of particle trajectories intersecting each voxel of a regular rectangular grid covering the domain of detection. For collimated measurements, we derived confidence estimates indicating when voxel trajectory counts are deviating significantly from what is expected from background radiation. Monte Carlo simulations of random background radiation confirm the estimated confidence values. Numerical results for backprojection applied to synthetic measurements are shown that indicate that small sources can be detected for signal-to-noise ratios as low as 0.1%.

Allmaras, Moritz

2011-12-01T23:59:59.000Z

358

Estimation theoretical image restoration  

E-Print Network (OSTI)

In this thesis, we have developed an extensive study to evaluate image restoration from a single image, colored or monochromatic. Using a mixture of Gaussian and Poisson noise process, we derived an objective function to ...

Dolne, Jean J

2008-01-01T23:59:59.000Z

359

Spectrographic imaging system  

DOE Patents (OSTI)

An imaging system for providing spectrographically resolved images. The system incorporates a one-dimensional spatial encoding mask which enables an image to be projected onto a two-dimensional image detector after spectral dispersion of the image. The dimension of the image which is lost due to spectral dispersion on the two-dimensional detector is recovered through employing a reverse transform based on presenting a multiplicity of different spatial encoding patterns to the image. The system is especially adapted for detecting Raman scattering of monochromatic light transmitted through or reflected from physical samples. Preferably, spatial encoding is achieved through the use of Hadamard mask which selectively transmits or blocks portions of the image from the sample being evaluated.

Morris, Michael D. (Ann Arbor, MI); Treado, Patrick J. (Ann Arbor, MI)

1991-01-01T23:59:59.000Z

360

Nuclear Imaging instrumentation  

NLE Websites -- All DOE Office Websites (Extended Search)

Nuclear Imaging instrumentation Advances in gamma-ray detection and imaging have increased the pace of discovery in a broad cross-section of the sciences ranging from nuclear...

Note: This page contains sample records for the topic "radiance synthetic imaging" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

LBNL Window & Daylighting Software -- WINDOW 6 Research Version  

NLE Websites -- All DOE Office Websites (Extended Search)

Using Radiance in WINDOW 7 beta August 3rd, 2012 Last Updated: 08032012 This package will add the capability to generate basic Radiance images from within WINDOW. You need to...

362

NIST Image Gallery: Search  

Science Conference Proceedings (OSTI)

... Search Tips - Search index includes image titles, descriptions, other text fields - Searches are case-insensitive - Keyword2 is optional. ...

363

Cell Image Visualization  

Science Conference Proceedings (OSTI)

... Biological cell image analysis projects include methods to measure cell segmentation accuracy and new segmentation methods to track live cells. ...

2011-06-17T23:59:59.000Z

364

Video image position determination  

DOE Patents (OSTI)

An optical beam position controller in which a video camera captures an image of the beam in its video frames, and conveys those images to a processing board which calculates the centroid coordinates for the image. The image coordinates are used by motor controllers and stepper motors to position the beam in a predetermined alignment. In one embodiment, system noise, used in conjunction with Bernoulli trials, yields higher resolution centroid coordinates.

Christensen, Wynn (Los Alamos, NM); Anderson, Forrest L. (Bernalillo, NM); Kortegaard, Birchard L. (Los Alamos, NM)

1991-01-01T23:59:59.000Z

365

Imaging with Scattered Neutrons  

E-Print Network (OSTI)

We describe a novel experimental technique for neutron imaging with scattered neutrons. These scattered neutrons are of interest for condensed matter physics, because they permit to reveal the local distribution of incoherent and coherent scattering within a sample. In contrast to standard attenuation based imaging, scattered neutron imaging distinguishes between the scattering cross section and the total attenuation cross section including absorption. First successful low-noise millimeter-resolution images by scattered neutron radiography and tomography are presented.

H. Ballhausen; H. Abele; R. Gaehler; M. Trapp; A. Van Overberghe

2006-10-30T23:59:59.000Z

366

A digital ASIC implementation of a video filter for synthetic aperture radar  

SciTech Connect

Two GaAs ASICs have been designed and implemented for a synthetic aperture radar which eliminate the dc bias in the sampled video data and increase the signal to noise ratio by summing the data across consecutive bursts. The High Pass Filter and Presummer ASICs process data at a maximum sample rate of 170 MHz and 125 MHz respectively. The chips are fully ECL and TTL compatible. The high pass filter is packaged in GigaBit's standard 132-pin ceramic package, while the presummer is packaged in TriQuint's standard 196-pin ceramic package. The presummer has been successfully tested in a prototype synthetic aperture radar at Sandia National Laboratories. The high pass filter has been successfully tested in a high speed test fixture. These ASICs provide flexibility and low power consumption at data rates previously unattainable with comparable hardware. 1 refs., 4 figs.

Remund, B.L. (Sandia National Labs., Albuquerque, NM (United States)); Chow, J.; Salinas, J. (GigaBit Logic, Newbury Park, CA (United States))

1991-01-01T23:59:59.000Z

367

Production of biocommodities and bioelectricity by cell-free synthetic enzymatic pathway biotransformations: Challenges and opportunities  

NLE Websites -- All DOE Office Websites (Extended Search)

PERSPECTIVE PERSPECTIVE Production of Biocommodities and Bioelectricity by Cell-Free Synthetic Enzymatic Pathway Biotransformations: Challenges and Opportunities Y.-H. Percival Zhang 1,2,3 1 Biological Systems Engineering Department, Virginia Polytechnic Institute and State University, 210-A Seitz Hall, Blacksburg, Virginia 24061; telephone: 540-231-7414; fax: 540-231-3199; e-mail: biofuels@vt.edu 2 Institute for Critical Technology and Applied Science (ICTAS), Virginia Polytechnic Institute and State University, Blacksburg, Virginia 3 DOE Bioenergy Science Center, Oak Ridge, Tennessee Received 21 July 2009; revision received 18 November 2009; accepted 23 November 2009 Published online 7 December 2009 in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/bit.22630 ABSTRACT: Cell-free synthetic (enzymatic) pathway bio- transformation (SyPaB)

368

Document Imaging | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Document Imaging Document Imaging Employee Services Cafeterias Conferencing and Special Events Copy Services Document Imaging Exchange Visitors Program Facility Operations Food...

369

Near-Electrode Imager  

DOE Patents (OSTI)

An apparatus, near-electrode imager, for employing nuclear magnetic resonance imaging to provide in situ measurements of electrochemical properties of a sample as a function of distance from a working electrode. The near-electrode imager use the radio frequency field gradient within a cylindrical toroid cavity resonator to provide high-resolution nuclear magnetic resonance spectral information on electrolyte materials.

Rathke, Jerome W.; Klingler, Robert J.; Woelk, Klaus; Gerald, Rex E.,II

1999-05-01T23:59:59.000Z

370

Acoustic Imaging Suite  

INL’s acoustic imaging technology improves methods of capturing moving images of a specified object by using a photorefractive effect to produce a full-field image of the object without using a probe to perform a full scan of the object. INL ...

371

Medical imaging systems  

Science Conference Proceedings (OSTI)

A medical imaging system provides simultaneous rendering of visible light and diagnostic or functional images. The system may be portable, and may include adapters for connecting various light sources and cameras in open surgical environments or laparascopic or endoscopic environments. A user interface provides control over the functionality of the integrated imaging system. In one embodiment, the system provides a tool for surgical pathology.

Frangioni, John V

2013-06-25T23:59:59.000Z

372

Diagnostic Imaging Emergency Medicine  

E-Print Network (OSTI)

UC Davis Veterinary Diagnostic Imaging Symposium Emergency Medicine May 15, 2011 Gladys Valley Hall devoted to triage, assessment, and imaging diagnostics in emergency medicine. Speakers in this year's symposium include specialists in diagnostic imaging, and emergency and critical care. Sunday May 15, 2011 8

Hammock, Bruce D.

373

The mine safety and health administration and how it affects the synthetic fuels industry  

SciTech Connect

The synthetic fuels industry is coming of age, with several demonstration plants operating and several commercial size plants in various stages of development. Although some of these facilities will be totally under the Occupational Safety and Health Act's (OSHA's) jurisdiction, others will be or have certain areas under the Mine Safety and Health Administration's (MSHA) regulatory authority. MSHA's jurisdiction and its regulations and guidelines are introduced.

Peason, T.P.

1983-11-01T23:59:59.000Z

374

NETL: Environmental Research - Fate of Mercury in Synthetic Gypsum Used for  

NLE Websites -- All DOE Office Websites (Extended Search)

Fate of Mercury in Synthetic Gypsum Used for Wallboard Production Fate of Mercury in Synthetic Gypsum Used for Wallboard Production This project will provide information about the fate of mercury in synthetic gypsum produced by wet FGD systems on coal-fired power plants, when used as feedstock for wallboard production. Wet FGD systems play a key role in current and future efforts to limit the air emissions of mercury control from coal-fired plants. Potential emissions of mercury from FGD byproduct gypsum during wallboard production could limit overall mercury control levels achieved by the coal power industry. Furthermore, any adverse effects of elevated mercury levels in wallboard products could undermine the use of FGD gypsum as a feedstock for wallboard plants. Under a Cooperative Agreement with DOE-NETL, USG Corp., a major producer of wallboard, will provide high-quality data on the extent and location of mercury release during the wallboard production process, and provide additional information on the potential for mercury leaching at the end of the wallboard life cycle, when it is disposed in municipal landfills.

375

Synthetic studies toward palau򡭩ne and enantioselective total synthesis of biogenetically related (+)-phakellin and (+)-monobromophakellin  

E-Print Network (OSTI)

Oroidin alkaloids, also known as pyrrole-imidazole alkaloids, have become a hot area of chemical and biological research due to their diverse and intriguing structural features and biological activities. Palau'amine (i), one of the hexacyclic oroidin-derived secondary metabolites, contains a fully substituted chloro-cyclopentane ring, a piperazinone moiety and two cyclic guanidines. With the uniqueness and complexity of its structure, palau’amine has been a synthetic challenge and has not yet succumbed to total synthesis. The overall objective of this work was to explore synthetic pathways toward palau’amine and biogenetically related congeners. Most of the work was focused on developing a synthetic pathway for the palau’amine structure proposed in its isolation report dated back to 1993. Starting from a Diels-Alder adduct (iii), oxidation/chlorination followed by phakellin (ii) annulation afforded an advanced pentacyclic intermediate possessing all the carbon framework and all but one ring system of palau’amine. Recently, however, a series of reports questioned the originally proposed palau’amine structure and called for a revision of the stereochemistry of two carbon centers (iv). Now palau’amine has an identical chlorocyclopentane core with axinellamine (vi). With the target changed, we devised a new biomimetic pathway toward both natural products via a common intermediate (v), which was synthesized in 12 steps from the Diels-Alder adduct (iii).

Wang, Shaohui

2008-05-01T23:59:59.000Z

376

Image Change Detection via Ensemble Learning  

SciTech Connect

The concept of geographic change detection is relevant in many areas. Changes in geography can reveal much information about a particular location. For example, analysis of changes in geography can identify regions of population growth, change in land use, and potential environmental disturbance. A common way to perform change detection is to use a simple method such as differencing to detect regions of change. Though these techniques are simple, often the application of these techniques is very limited. Recently, use of machine learning methods such as neural networks for change detection has been explored with great success. In this work, we explore the use of ensemble learning methodologies for detecting changes in bitemporal synthetic aperture radar (SAR) images. Ensemble learning uses a collection of weak machine learning classifiers to create a stronger classifier which has higher accuracy than the individual classifiers in the ensemble. The strength of the ensemble lies in the fact that the individual classifiers in the ensemble create a mixture of experts in which the final classification made by the ensemble classifier is calculated from the outputs of the individual classifiers. Our methodology leverages this aspect of ensemble learning by training collections of weak decision tree based classifiers to identify regions of change in SAR images collected of a region in the Staten Island, New York area during Hurricane Sandy. Preliminary studies show that the ensemble method has approximately 11.5% higher change detection accuracy than an individual classifier.

Martin, Benjamin W [ORNL; Vatsavai, Raju [ORNL

2013-01-01T23:59:59.000Z

377

SNAP Image Gallery  

NLE Websites -- All DOE Office Websites (Extended Search)

Images Images Cutaway image of SNAP A cutaway illustration of SNAP showing some of the interior optics. Cutaway image of SNAP A computer generated cutaway illustration of SNAP Cutaway image of SNAP's primary mirror A computer generated cutaway illustration of SNAP's primary mirror image of SNAP spacecraft A computer generated illustration of the SNAP spacecraft computer generated image of SNAP A computer generated illustration of SNAP Before-and-after pictures (and Hubble Space Telescope picture) of a high-redshift supernovae discovered by the Supernova Cosmology Project in March, 1998. Before-and-after pictures (and Hubble Space Telescope picture) of a high-redshift supernovae discovered in March, 1998. This observaton showed that the expansion of the universe was accelerarting. Credit: High Redshift Supernova Search Supernova Cosmology Project

378

Shape-based image retrieval applied to trademark images  

Science Conference Proceedings (OSTI)

In this chapter, we propose a new shape-based, query-by-example, image database retrieval method that is able to match a query image to one of the images in the database, based on a whole or partial match. The proposed method has two key components: ... Keywords: image databases, shape analysis, shape representation, shape-based image retrieval, trademark image retrieval

Ossama El Badawy; Mohamed Kamel

2004-01-01T23:59:59.000Z

379

OpenEI Community - images  

Open Energy Info (EERE)

Image upload with broken thumbnail image http:en.openei.orgcommunitydiscussionimage-upload-broken-thumbnail-image

OpenEI users can upload images to the wiki by typing a new...

380

Similarity Retrieval of Trademark Images  

Science Conference Proceedings (OSTI)

The Artisan system retrieves abstract trademark images by shape similarity. It analyzes each image to characterize key shape components, grouping image regions into families that potentially mirror human image perception, and then derives characteristic ...

John P. Eakins; Jago M. Boardman; Margaret E. Graham

1998-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "radiance synthetic imaging" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Part Mining for Synthetic Biology (2013 DOE JGI Genomics of Energy and Environment 8th Annual User Meeting)  

SciTech Connect

Chris Voigt from MIT delivers the opening keynote on "Part Mining for Synthetic Biology" at the 8th Annual Genomics of Energy & Environment Meeting on March 26, 2013 in Walnut Creek, Calif.

Voigt, Chris [MIT

2013-03-01T23:59:59.000Z

382

Comparison of Synthetic Aperture Radar–Derived Wind Speeds with Buoy Wind Speeds along the Mountainous Alaskan Coast  

Science Conference Proceedings (OSTI)

Satellite-borne synthetic aperture radar (SAR) offers the potential for remotely sensing surface wind speed both over the open sea and in close proximity to the coast. The resolution improvement of SAR over scatterometers is of particular ...

C. M. Fisher; G. S. Young; N. S. Winstead; J. D. Haqq-Misra

2008-05-01T23:59:59.000Z

383

Efficient recovery of nano-sized iron oxide particles from synthetic acid-mine drainage (AMD) water using fuel cell  

E-Print Network (OSTI)

Efficient recovery of nano-sized iron oxide particles from synthetic acid-mine drainage (AMD) water electricity. Here we show that this approach can also be used as a technique to generate spherical nano

384

Characteristics of Ocean Surface Winds in the Lee of an Isolated Island Observed by Synthetic Aperture Radar  

Science Conference Proceedings (OSTI)

Characteristics of ocean surface winds around an isolated island are examined in relation to atmospheric stability using a synthetic aperture radar (SAR) and rawinsonde sounding observations. The SAR-derived winds on 22 May 2009 indicate a low-...

Osamu Isoguchi; Masanobu Shimada; Hiroshi Kawamura

2011-06-01T23:59:59.000Z

385

Manual and Semiautomated Wind Direction Editing for Use in the Generation of Synthetic Aperture Radar Wind Speed Imagery  

Science Conference Proceedings (OSTI)

Previous studies have demonstrated that satellite synthetic aperture radar (SAR) can be used as an accurate scatterometer, yielding wind speed fields with subkilometer resolution. This wind speed generation is only possible, however, if a ...

George S. Young; Todd D. Sikora; Nathaniel S. Winstead

2007-06-01T23:59:59.000Z

386

ARM - Measurement - Hydrometeor image  

NLE Websites -- All DOE Office Websites (Extended Search)

image image ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Hydrometeor image Images of hydrometeors from which one can derive characteristics such as size and shape. Categories Cloud Properties Instruments The above measurement is considered scientifically relevant for the following instruments. Refer to the datastream (netcdf) file headers of each instrument for a list of all available measurements, including those recorded for diagnostic or quality assurance purposes. Field Campaign Instruments LEARJET : Lear Jet PARTIMG : Particle imager UAV-PROTEUS-MICRO : Proteus Cloud Microphysics Instruments SPEC-CPI : Stratton Park Engineering Company - Cloud particle imager UAV-PROTEUS : UAV Proteus

387

Video Toroid Cavity Imager  

DOE Patents (OSTI)

A video toroid cavity imager for in situ measurement of electrochemical properties of an electrolytic material sample includes a cylindrical toroid cavity resonator containing the sample and employs NMR and video imaging for providing high-resolution spectral and visual information of molecular characteristics of the sample on a real-time basis. A large magnetic field is applied to the sample under controlled temperature and pressure conditions to simultaneously provide NMR spectroscopy and video imaging capabilities for investigating electrochemical transformations of materials or the evolution of long-range molecular aggregation during cooling of hydrocarbon melts. The video toroid cavity imager includes a miniature commercial video camera with an adjustable lens, a modified compression coin cell imager with a fiat circular principal detector element, and a sample mounted on a transparent circular glass disk, and provides NMR information as well as a video image of a sample, such as a polymer film, with micrometer resolution.

Gerald, Rex E. II; Sanchez, Jairo; Rathke, Jerome W.

2004-08-10T23:59:59.000Z

388

Video image position determination  

DOE Patents (OSTI)

The present invention generally relates to the control of video and optical information and, more specifically, to control systems utilizing video images to provide control. Accurate control of video images and laser beams is becoming increasingly important as the use of lasers for machine, medical and experimental processes escalates. In, AURORA, an installation at Los Alamos National Laboratory dedicated to laser fusion research, it is necessary to precisely control the path and angle of up to 96 lasers beams. This invention is comprised of an optical beam position controller in which a video camera captures an image of the beam in its video frames, and conveys those images to a processing board which calculates the centroid coordinates for the image. The image coordinates are used by motor controllers and stepper motors to position the beam in a predetermined alignment. In one embodiment, system noise, used in conjunction with Bernoulli trials, yields higher resolution centroid coordinates.

Christensen, W.; Anderson, F.L.; Kortegaard, B.L.

1990-01-01T23:59:59.000Z

389

Video image position determination  

DOE Patents (OSTI)

The present invention generally relates to the control of video and optical information and, more specifically, to control systems utilizing video images to provide control. Accurate control of video images and laser beams is becoming increasingly important as the use of lasers for machine, medical and experimental processes escalates. In, AURORA, an installation at Los Alamos National Laboratory dedicated to laser fusion research, it is necessary to precisely control the path and angle of up to 96 lasers beams. This invention is comprised of an optical beam position controller in which a video camera captures an image of the beam in its video frames, and conveys those images to a processing board which calculates the centroid coordinates for the image. The image coordinates are used by motor controllers and stepper motors to position the beam in a predetermined alignment. In one embodiment, system noise, used in conjunction with Bernoulli trials, yields higher resolution centroid coordinates.

Christensen, W.; Anderson, F.L.; Kortegaard, B.L.

1990-12-31T23:59:59.000Z

390

Ferroelectric optical image comparator  

DOE Patents (OSTI)

A ferroelectric optical image comparator has a lead lanthanum zirconate titanate thin-film device which is constructed with a semi-transparent or transparent conductive first electrode on one side of the thin film, a conductive metal second electrode on the other side of the thin film, and the second electrode is in contact with a nonconducting substrate. A photoinduced current in the device represents the dot product between a stored image and an image projected onto the first electrode. One-dimensional autocorrelations are performed by measuring this current while displacing the projected image. 7 figures.

Butler, M.A.; Land, C.E.; Martin, S.J.; Pfeifer, K.B.

1993-11-30T23:59:59.000Z

391

Ferroelectric optical image comparator  

DOE Patents (OSTI)

A ferroelectric optical image comparator has a lead lanthanum zirconate titanate thin-film device which is constructed with a semi-transparent or transparent conductive first electrode on one side of the thin film, a conductive metal second electrode on the other side of the thin film, and the second electrode is in contact with a nonconducting substrate. A photoinduced current in the device represents the dot product between a stored image and an image projected onto the first electrode. One-dimensional autocorrelations are performed by measuring this current while displacing the projected image.

Butler, Michael A. (Albuquerque, NM); Land, Cecil E. (Albuquerque, NM); Martin, Stephen J. (Albuquerque, NM); Pfeifer, Kent B. (Los Lunas, NM)

1993-01-01T23:59:59.000Z

392

Image Shift Measurement  

Science Conference Proceedings (OSTI)

... Set the write directory to a new folder for the cropped images. Use Process Folder / Text file / Template to make the boiler plate processing file. ...

393

Manhattan Project: Places Images  

Office of Scientific and Technical Information (OSTI)

PLACES IMAGES PLACES IMAGES Resources > Photo Gallery Scroll down to see each of these images individually. The images are: 1. Remains of a Shinto Shrine, Nagasaki, October 1945 (courtesy the United States Marine Corps, Lieutenant R. J. Battersby, photographer, via the National Archives); 2. University of California, Berkeley, 1940 (courtesy the Lawrence Berkeley National Laboratory); 3. Aerial photograph of the Trinity Site after the test (courtesy the Federation of American Scientists); 4. Aerial photograph of Hiroshima before the bombing; 5. Columbia University, 1903 (courtesy the Library of Congress; this photograph originated from the Detroit Publishing Company; it was a 1949 gift to the Library of Congress from the State Historical Society of Colorado).

394

Quantitative luminescence imaging system  

DOE Patents (OSTI)

The QLIS images and quantifies low-level chemiluminescent reactions in an electromagnetic field. It is capable of real time nonperturbing measurement and simultaneous recording of many biochemical and chemical reactions such as luminescent immunoassays or enzyme assays. The system comprises image transfer optics, a low-light level digitizing camera with image intensifying microchannel plates, an image process or, and a control computer. The image transfer optics may be a fiber image guide with a bend, or a microscope, to take the light outside of the RF field. Output of the camera is transformed into a localized rate of cumulative digitalized data or enhanced video display or hard-copy images. The system may be used as a luminescent microdosimetry device for radiofrequency or microwave radiation, as a thermal dosimeter, or in the dosimetry of ultra-sound (sonoluminescence) or ionizing radiation. It provides a near-real-time system capable of measuring the extremely low light levels from luminescent reactions in electromagnetic fields in the areas of chemiluminescence assays and thermal microdosimetry, and is capable of near-real-time imaging of the sample to allow spatial distribution analysis of the reaction. It can be used to instrument three distinctly different irradiation configurations, comprising (1) RF waveguide irradiation of a small Petri-dish-shaped sample cell, (2) RF irradiation of samples in a microscope for the microscopic imaging and measurement, and (3) RF irradiation of small to human body-sized samples in an anechoic chamber. 22 figs.

Erwin, D.N.; Kiel, J.L.; Batishko, C.R.; Stahl, K.A.

1990-08-14T23:59:59.000Z

395

Imaging Beyond Optics  

NLE Websites -- All DOE Office Websites (Extended Search)

Views" piece in that same issue. "Generations of astronomers have used interferometric tests to achieve the proper shape of their mirrors before using them to image the heavens....

396

Quantitative luminescence imaging system  

DOE Patents (OSTI)

The QLIS images and quantifies low-level chemiluminescent reactions in an electromagnetic field. It is capable of real time nonperturbing measurement and simultaneous recording of many biochemical and chemical reactions such as luminescent immunoassays or enzyme assays. The system comprises image transfer optics, a low-light level digitizing camera with image intensifying microchannel plates, an image process or, and a control computer. The image transfer optics may be a fiber image guide with a bend, or a microscope, to take the light outside of the RF field. Output of the camera is transformed into a localized rate of cumulative digitalized data or enhanced video display or hard-copy images. The system may be used as a luminescent microdosimetry device for radiofrequency or microwave radiation, as a thermal dosimeter, or in the dosimetry of ultra-sound (sonoluminescence) or ionizing radiation. It provides a near-real-time system capable of measuring the extremely low light levels from luminescent reactions in electromagnetic fields in the areas of chemiluminescence assays and thermal microdosimetry, and is capable of near-real-time imaging of the sample to allow spatial distribution analysis of the reaction. It can be used to instrument three distinctly different irradiation configurations, comprising (1) RF waveguide irradiation of a small Petri-dish-shaped sample cell, (2) RF irradiation of samples in a microscope for the microscopie imaging and measurement, and (3) RF irradiation of small to human body-sized samples in an anechoic chamber.

Erwin, David N. (San Antonio, TX); Kiel, Johnathan L. (San Antonio, TX); Batishko, Charles R. (West Richland, WA); Stahl, Kurt A. (Richland, WA)

1990-01-01T23:59:59.000Z

397

Kursk Site Image #1  

NLE Websites -- All DOE Office Websites (Extended Search)

Graphs Image KRS-1: Clipping above-ground biomass at the Kursk grassland site, Russia. (Dr. Kira Khodashova and student Nina N., Moscow State University, are estimating monthly...

398

Further Analysis of Real Beam Line Optics From A Synthetic Beam  

Science Conference Proceedings (OSTI)

Standard closed-orbit techniques for Twiss parameter measurement are not applicable to the open-ended Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab. The evolution of selected sets of real orbits in the accelerator models the behavior of a 'synthetic' beam. This process will be validated against beam profile-based Twiss parameter measurements and should provide the distributed optical information needed to optimize beamline tuning for an open-ended system. This work will discuss the current and future states of this technique, as well as an example of its use in the CEBAF machine.

Ryan Bodenstein, Michael Tiefenback, Yves Roblin

2012-07-01T23:59:59.000Z

399

Synthetic crude oils carcinogenicity screening tests. Quarterly report, October 16, 1978--February 15, 1979  

DOE Green Energy (OSTI)

Four crude oils (Southern Louisiana Crude Petroleum, H. Coal Syncrude, Paraho Crude Shale Oil, and Geokinetics in situ Shale Oil) have been distilled into four fractions (naphtha, mid-distillate, gas oil, and residue) for analysis and biological (mutagenicity and carcinogenicity) screening testing. Results of selected analytical tests have been obtained on the original crude oils and the fractions. Ames tests and initiation/promotion tests have been started on the original crude oils and the fractions. Four additional synthetic crude oils (Exxon EDS, SRC II, H Coal Fuel Oil, and Occidental In Situ Shale Oil) are being obtained for a second similar series of tests to be started in approximately four months.

Calkins, W.H.; Deye, J.F.; King, C.F.; Hartgrove, R.W.; Krahn, D.F.

1979-01-01T23:59:59.000Z

400

Automatic Image Orientation Determination with Natural Image Statistics  

E-Print Network (OSTI)

Automatic Image Orientation Determination with Natural Image Statistics Siwei Lyu Dept. of Computer a new method for automatically determining image orientations. This method is based on a set of natural image statistics collected from a multi- scale multi-orientation image decomposition (e.g., wavelets

Lyu, Siwei

Note: This page contains sample records for the topic "radiance synthetic imaging" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Quantum Imaging: Enhanced Image Formation Using Quantum States of Light  

E-Print Network (OSTI)

Quantum Imaging: Enhanced Image Formation Using Quantum States of Light Robert W. Boyd, Kam Wai, University of Rochester, Rochester, NY 14627, USA ABSTRACT We review recent research in the field of quantum imaging. Quantum imaging deals with the formation of images that possess higher resolution or better

Boyd, Robert W.

402

Heart imaging method  

DOE Patents (OSTI)

A method for providing an image of the human heart's electrical system derives time-of-flight data from an array of EKG electrodes and this data is transformed into phase information. The phase information, treated as a hologram, is reconstructed to provide an image in one or two dimensions of the electrical system of the functioning heart.

Collins, H. Dale (Richland, WA); Gribble, R. Parks (Richland, WA); Busse, Lawrence J. (Littleton, CO)

1991-01-01T23:59:59.000Z

403

Medical imaging systems  

DOE Patents (OSTI)

A medical imaging system provides simultaneous rendering of visible light and fluorescent images. The system may employ dyes in a small-molecule form that remains in a subject's blood stream for several minutes, allowing real-time imaging of the subject's circulatory system superimposed upon a conventional, visible light image of the subject. The system may also employ dyes or other fluorescent substances associated with antibodies, antibody fragments, or ligands that accumulate within a region of diagnostic significance. In one embodiment, the system provides an excitation light source to excite the fluorescent substance and a visible light source for general illumination within the same optical guide that is used to capture images. In another embodiment, the system is configured for use in open surgical procedures by providing an operating area that is closed to ambient light. More broadly, the systems described herein may be used in imaging applications where a visible light image may be usefully supplemented by an image formed from fluorescent emissions from a fluorescent substance that marks areas of functional interest.

Frangioni, John V. (Wayland, MA)

2012-07-24T23:59:59.000Z

404

DOUBLE MAJORS Imaging Science + ...  

E-Print Network (OSTI)

DOUBLE MAJORS Imaging Science + ... Applied Mathematics Biomedical Sciences Computer Science Undergraduate Research Internships and Cooperative Education (Co-op) (optional) Study Abroad WHY IMAGING SCIENCE Science: BS, MS, PhD Color Science: MS, PhD BS + MS/PhD Combos HUMAN VISION BIO- MEDICAL ASTRO- PHYSICS

Zanibbi, Richard

405

Manhattan Project: Image Retouching`  

Office of Scientific and Technical Information (OSTI)

Image Retouching Image Retouching Resources > Photo Gallery Smyth Report (original) Smyth Report (retouched) Images on this web site have sometimes been "retouched." In every case, however, the intention has been only to restore the image as much as possible to its original condition. Above is a rather extreme example-"before and after" versions of the cover of the Smyth Report (Henry DeWolf Smyth, Atomic Energy for Military Purposes: The Official Report on the Development of the Atomic Bomb under the Auspices of the United States Government, 1940-1945 (Princeton, NJ: Princeton University Press, 1945)). The Smyth Report was commissioned by Leslie Groves and originally issued by the Manhattan Engineer District. Princeton University Press reprinted it in book form as a "public service" with "reproduction in whole or in part authorized and permitted.") Larger versions of the same images are below.

406

GTL Image Gallery  

NLE Websites -- All DOE Office Websites (Extended Search)

Human Genome Project Information • Genomic Science • Microbial Genome Program • sitemap • home Human Genome Project Information • Genomic Science • Microbial Genome Program • sitemap • home Announcing the New Image Gallery Visit the new Image Gallery for an expanded suite of images Biofuels Browse the 2010 "Bioenergy Research Centers: An Overview of the Science" Brochure Gallery. Browse the 2006 "Breaking the Biological Barriers to Cellulosic Ethanol: A Joint Research Agenda" Report Gallery. Browse more biofuels images (includes the June 2006 "Understanding Biomass" Primer Gallery). Systems Biology Browse the August 2005 "Genomics:GTL Roadmap: Systems Biology for Energy and Environment" Gallery. Basic Genomics Browse the Human Chromosome Gallery. Browse more Basic Genomics images. Carbon Cycling

407

User Science Images  

NLE Websites -- All DOE Office Websites (Extended Search)

User Science Images User Science Images User Science Images Sort by: Default | Name | Date (low-high) | Date (high-low) | Category NIMROD-1.png FES: NIMROD Simulation February 18, 2010 | Author(s): Dr. Charlson C. Kim (University of Washington) | Category: Fusion Energy | URL: https://nimrodteam.org/ Download Image: NIMROD-1.png | png | 1.5 MB Trajectory of an energetic ion in a Field Reverse Configuration (FRC) magnetic field. Magnetic separatrix denoted by green surface. Spheres are colored by azimuthal velocity. Image courtesy of Charlson Kim, University of Washington; NERSC repos m487, mp21, m1552 Scheibe.png BER: Pore-Scale Fluid Flow for Subsurface Reactive Transport January 1, 2008 | Author(s): Timothy D. Scheibe, PNNL | Category: Environmental Science | URL: http://http://subsurface.pnl.gov/

408

Efficient Graffiti Image Retrieval  

Science Conference Proceedings (OSTI)

Research of graffiti character recognition and retrieval, as a branch of traditional optical character recognition (OCR), has started to gain attention in recent years. We have investigated the special challenge of the graffiti image retrieval problem and propose a series of novel techniques to overcome the challenges. The proposed bounding box framework locates the character components in the graffiti images to construct meaningful character strings and conduct image-wise and semantic-wise retrieval on the strings rather than the entire image. Using real world data provided by the law enforcement community to the Pacific Northwest National Laboratory, we show that the proposed framework outperforms the traditional image retrieval framework with better retrieval results and improved computational efficiency.

Yang, Chunlei; Wong, Pak C.; Ribarsky, William; Fan, Jianping

2012-07-05T23:59:59.000Z

409

A model for improving microbial biofuel production using a synthetic feedback loop  

DOE Green Energy (OSTI)

Cells use feedback to implement a diverse range of regulatory functions. Building synthetic feedback control systems may yield insight into the roles that feedback can play in regulation since it can be introduced independently of native regulation, and alternative control architectures can be compared. We propose a model for microbial biofuel production where a synthetic control system is used to increase cell viability and biofuel yields. Although microbes can be engineered to produce biofuels, the fuels are often toxic to cell growth, creating a negative feedback loop that limits biofuel production. These toxic effects may be mitigated by expressing efflux pumps that export biofuel from the cell. We developed a model for cell growth and biofuel production and used it to compare several genetic control strategies for their ability to improve biofuel yields. We show that controlling efflux pump expression directly with a biofuel-responsive promoter is a straight forward way of improving biofuel production. In addition, a feed forward loop controller is shown to be versatile at dealing with uncertainty in biofuel production rates.

Dunlop, Mary; Keasling, Jay; Mukhopadhyay, Aindrila

2011-07-14T23:59:59.000Z

410

Calculating the vulnerability of synthetic polymers to autoignition during nuclear flash. Final report  

SciTech Connect

The purpose of our investigation was to determine if the rapid progression of fire to flashover conditions in a furnished room, observed in a 1953 nuclear weapons test at the Nevada Test Site (the Encore Event), might be typical behavior rather than an aberration. If flashover under such conditions is indeed likely, this phenomenon is worth pursuing in view of the increased threat to buildings and human life from possible large-scale fires. We placed special emphasis on fires that occurred in modern rooms, i.e., ones furnished with upholstery and drapery materials made from synthetic polymers. Examination of photochemical processes showed them to be an unlikely explanation, either in Encore or in the future. Our calculation of rapid radiant-heating behavior of a few materials demonstrated that fabrics and fabric-covered foams would exceed their autoignition temperature when exposed to a 25-cal/cm/sup 2/ fluence from a 1-Mt air burst weapon. Because synthetic polymers have higher heating values and release heat faster during combustion than do the cellulosics used in the Encore experiment, early flashover should not be unexpected in contemporary households. However, the far-field thermal fluence required would be higher because of the absorption of thermal energy by windows and window coverings. Because of the complexity of the problem, carefully planned, full-scale experiments will be needed to finally answer the question. 39 refs., 9 figs., 8 tabs.

Hickman, R.; Reitter, T.

1985-01-01T23:59:59.000Z

411

Removal of n-tributyl phosphate from synthetic intermediate level waste  

SciTech Connect

Experiments were carried out on the removal on n-tributyl phosphate (TBP) from the synthetic effluents of intermediate level waste (ILW). The candidate materials selected for this study were XAD-4 resin, Tulsion-A-72 MP resin, activated charcoal, and polyurethane foam. These materials were characterized for their distribution coefficients of TBP in a TBP-ethanol-water medium. XAD resin and PU foam showed better removal of TBP. To understand the mechanism of removal of TBP by the candidate materials, such physical properties as specific surface area, pore size distribution, and zeta potentials were determined. The zeta potential of the TBP in an ethanol-water medium was measured. The pore size distribution compared to the specific surface area and surface charges of the samples played an important role in the removal of TBP. XAD-4 resin was used in column studies for the removal of TBP from synthetic ILW. About 13,500 bed volumes of ILW could be passed before a 0.1% breakthrough capacity was attained.

Rao, S.V.S.; Raj, S.S.; Lal, K.B. [Centralized Waste Management Facility, Kalpakkam (India)] [and others

1996-04-01T23:59:59.000Z

412

Edge structure preserving image denoising  

Science Conference Proceedings (OSTI)

Image denoising is important in image analysis. It is often used for pre-processing images so that subsequent image analysis is more reliable. Besides noise removal, one important requirement for image denoising procedures is that they should preserve ... Keywords: Angles, Curvature, Edges, Jump-preserving surface estimation, Local smoothing, Nonparametric regression, Surface estimation

Peihua Qiu; Partha Sarathi Mukherjee

2010-10-01T23:59:59.000Z

413

Adaptive wiener image restoration kernel  

DOE Patents (OSTI)

A method and device for restoration of electro-optical image data using an adaptive Wiener filter begins with constructing imaging system Optical Transfer Function, and the Fourier Transformations of the noise and the image. A spatial representation of the imaged object is restored by spatial convolution of the image using a Wiener restoration kernel.

Yuan, Ding (Henderson, NV)

2007-06-05T23:59:59.000Z

414

IMAGING: the Neutron Imaging Prototype Facility at HFIR | ORNL...  

NLE Websites -- All DOE Office Websites (Extended Search)

Neutron Imaging Prototype Facility CG-1D flight tubes Neutron imaging beam line CG-1D. The CG-1D beam is used for neutron imaging measurements and can be configured for white beam...

415

Retrieval of Surface Wind Speed and Aerosol Optical Depth over the Oceans from AVHRR Images of Sun Glint  

Science Conference Proceedings (OSTI)

This paper investigates the feasibility of recovering both the tropospheric aerosol loading and the surface wind speed from satellite measurements of the radiance within cloud free regions of sun glint over the ocean surface. The method relies on ...

D. M. O'Brien; R. M. Mitchell

1988-12-01T23:59:59.000Z

416

Polarization transfer NMR imaging  

DOE Patents (OSTI)

A nuclear magnetic resonance (NMR) image is obtained with spatial information modulated by chemical information. The modulation is obtained through polarization transfer from a first element representing the desired chemical, or functional, information, which is covalently bonded and spin-spin coupled with a second element effective to provide the imaging data. First and second rf pulses are provided at first and second frequencies for exciting the imaging and functional elements, with imaging gradients applied therebetween to spatially separate the nuclei response for imaging. The second rf pulse is applied at a time after the first pulse which is the inverse of the spin coupling constant to select the transfer element nuclei which are spin coupled to the functional element nuclei for imaging. In a particular application, compounds such as glucose, lactate, or lactose, can be labeled with .sup.13 C and metabolic processes involving the compounds can be imaged with the sensitivity of .sup.1 H and the selectivity of .sup.13 C.

Sillerud, Laurel O. (Los Alamos, NM); van Hulsteyn, David B. (Santa Fe, NM)

1990-01-01T23:59:59.000Z

417

Image Windows - description of data types  

Science Conference Proceedings (OSTI)

... image, or RGB color image. cstack Stack of color (RGB) images. FRED (text) window; Dialog; (various) graphics windows.

418

Magnetic resonance imaging in Mexico  

Science Conference Proceedings (OSTI)

MR imaging has experienced an important growth worldwide and in particular in the USA and Japan. This imaging technique has also shown an important rise in the number of MR imagers in Mexico. However

A. O. Rodriguez; R. Rojas; F. A. Barrios

2001-01-01T23:59:59.000Z

419

Scanning computed confocal imager  

DOE Patents (OSTI)

There is provided a confocal imager comprising a light source emitting a light, with a light modulator in optical communication with the light source for varying the spatial and temporal pattern of the light. A beam splitter receives the scanned light and direct the scanned light onto a target and pass light reflected from the target to a video capturing device for receiving the reflected light and transferring a digital image of the reflected light to a computer for creating a virtual aperture and outputting the digital image. In a transmissive mode of operation the invention omits the beam splitter means and captures light passed through the target.

George, John S. (Los Alamos, NM)

2000-03-14T23:59:59.000Z

420

Gas-to-liquids synthetic fuels for use in fuel cells : reformability, energy density, and infrastructure compatibility.  

DOE Green Energy (OSTI)

The fuel cell has many potential applications, from power sources for electric hybrid vehicles to small power plants for commercial buildings. The choice of fuel will be critical to the pace of its commercialization. This paper reviews the various liquid fuels being considered as an alternative to direct hydrogen gas for the fuel cell application, presents calculations of the hydrogen and carbon dioxide yields from autothermal reforming of candidate liquid fuels, and reports the product gas composition measured from the autothermal reforming of a synthetic fuel in a micro-reactor. The hydrogen yield for a synthetic paraffin fuel produced by a cobalt-based Fischer-Tropsch process was found to be similar to that of retail gasoline. The advantages of the synthetic fuel are that it contains no contaminants that would poison the fuel cell catalyst, is relatively benign to the environment, and could be transported in the existing fuel distribution system.

Ahmed, S.; Kopasz, J. P.; Russell, B. J.; Tomlinson, H. L.

1999-09-08T23:59:59.000Z

Note: This page contains sample records for the topic "radiance synthetic imaging" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Experimental Study on Shear Fatigue Behavior and Stiffness Performance of Warm Mix Asphalt by adding Synthetic Wax  

E-Print Network (OSTI)

Synthetic waxes produced by standard and registered processes may be used to manufacture Warm Mix Asphalt (WMA), which is a modified asphalt concrete produced, applied and compacted at temperatures below those typically required. This feature leads to environmental benefits, such as reduced energy consumption, gas and fume emissions, as well as to economic/operational advantages, such as lower production costs and greater hauling distances for extended construction seasons with tighter schedules. The present article serves to compare the mechanical performance of a WMA produced by adding synthetic wax with a traditional Hot Mix Asphalt (HMA) specimen, in terms of shear fatigue response and both complex and stiffness moduli. The experimental results and related modeling work demonstrate that adding synthetic wax into the WMA composition does not hinder either the destructive or non-destructive performance of an HMA, and this finding is corroborated by respectively measuring fatigue life and stiffness.

Christophe Petit; Anne Millien; Francesco Canestrari; Valter Pannunzio; Amadeo Virgili

2012-03-13T23:59:59.000Z

422

Ghost Imaging with Blackbody Radiation  

E-Print Network (OSTI)

We present a theoretical study of ghost imaging by using blackbody radiation source. A Gaussian thin lens equation for the ghost imaging, which depends on both paths, is derived. The dependences of the visibility and quality of the image on the transverse size and temperature of the blackbody are studied. The main differences between the ghost imaging by using the blackbody radiation and by using the entangled photon pairs are image-forming equation, and the visibility and quality of the image

Yangjian Cai; Shiyao Zhu

2004-07-29T23:59:59.000Z

423

Analysis of Natural Graphite, Synthetic Graphite, and Thermosetting Resin Candidates for Use in Fuel Compact Matrix  

Science Conference Proceedings (OSTI)

The AGR-1 and AGR-2 compacting process involved overcoating TRISO particles and compacting them in a steel die. The overcoating step is the process of applying matrix to the OPyC layer of TRISO particles in a rotating drum in order to build up an overcoat layer of desired thickness. The matrix used in overcoating is a mixture of natural graphite, synthetic graphite, and thermosetting resin in the ratio, by weight, of 64:16:20. A wet mixing process was used for AGR-1 and AGR-2, in that the graphites and resin were mixed in the presence of ethyl alcohol. The goal of the wet mixing process was to 'resinate' the graphite particles, or coat each individual graphite particle with a thin layer of resin. This matrix production process was similar to the German, Chinese, Japanese, and South African methods, which also use various amount of solvent during mixing. See Appendix 1 for information on these countries matrix production techniques. The resin used for AGR-1 and AGR-2 was provided by Hexion, specifically Hexion grade Durite SC1008. Durite SC1008 is a solvated (liquid) resole phenolic resin. A resole resin does not typically have a hardening agent added. The major constituent of SC1008 is phenol, with minor amounts of formaldehyde. Durite SC1008 is high viscosity, so additional ethyl alcohol was added during matrix production in order to reduce its viscosity and enhance graphite particle resination. The current compacting scale up plan departs from a wet mixing process. The matrix production method specified in the scale up plan is a co-grinding jet mill process where powdered phenolic resin and graphite are all fed into a jet mill at the same time. Because of the change in matrix production style, SC1008 cannot be used in the jet milling process because it is a liquid. The jet milling/mixing process requires that a suite of solid or powdered resins be investigated. The synthetic graphite used in AGR-1 and AGR-2 was provided by SGL Carbon, grade KRB2000. KRB2000 is a graphitized petroleum coke. The availability of KRB2000 is perhaps in question, so a replacement synthetic graphite may need to be identified. This report presents data on potential replacements for KRB2000.

Trammell, Michael P [ORNL; Pappano, Peter J [ORNL

2011-09-01T23:59:59.000Z

424

Quantitative Imaging in Cell Biology  

E-Print Network (OSTI)

Quantitative! imaging! in! biology! is! concerned! with!Quantitative! imaging! in! biology! is! concerned! with!advances! in! cell! biology! by! enabling! the! tracking!

Yassif, Jaime

2012-01-01T23:59:59.000Z

425

NIST Hyperspectral Image Projector (HIP)  

Science Conference Proceedings (OSTI)

... In DLP systems, the projected image is made from a composite of grayscale images representing each of the RGB colors (red, green, and blue). ...

2013-08-02T23:59:59.000Z

426

NERSC Image and Video Galleries  

NLE Websites -- All DOE Office Websites (Extended Search)

Archive User Science Images Home News & Publications Galleries Galleries 18.jpg NERSC Systems In this gallery view images and videos of the systems that undergird all NERSC...

427

Final Technical Report - A Combined Synthetic, Spectroscopic, and Theoretical Approach to the Rational Design of Photophysical and Photochemical Properties of Dendrimers  

DOE Green Energy (OSTI)

We summarize progress in the DOE project, "A Combined Synthetic, Spectroscopic, and Theoretical Approach to the Rational Design of Photophysical and Photochemical Properties of Dendrimers."

C. J. Bardeen; T. J. Martinez; J. S. Moore

2006-10-04T23:59:59.000Z

428

Modeling Collapse Chimney and Spall Zone Settlement as a Source of Post-Shot Subsidence Detected by Synthetic Aperture Radar Interferometry  

Science Conference Proceedings (OSTI)

Ground surface subsidence resulting from the March 1992 JUNCTION underground nuclear test at the Nevada Test Site (NTS) imaged by satellite synthetic aperture radar interferometry (InSAR) wholly occurred during a period of several months after the shot (Vincent et al., 1999) and after the main cavity collapse event. A significant portion of the subsidence associated with the small (less than 20 kt) GALENA and DIVIDER tests probably also occurred after the shots, although the deformation detected in these cases contains additional contributions from coseismic processes, since the radar scenes used to construct the deformation interferogram bracketed these two later events, The dimensions of the seas of subsidence resulting from all three events are too large to be solely accounted for by processes confined to the damage zone in the vicinity of the shot point or the collapse chimney. Rather, the subsidence closely corresponds to the span dimensions predicted by Patton's (1990) empirical relationship between spall radius and yield. This suggests that gravitational settlement of damaged rock within the spall zone is an important source of post-shot subsidence, in addition to settlement of the rubble within the collapse chimney. These observations illustrate the potential power of InSAR as a tool for Comprehensive Nuclear-Test-Ban Treaty (CTBT) monitoring and on-site inspection in that the relatively broad ({approx} 100 m to 1 km) subsidence signatures resulting from small shots detonated at normal depths of burial (or even significantly overburied) are readily detectable within large geographical areas (100 km x 100 km) under favorable observing conditions. Furthermore, the present results demonstrate the flexibility of the technique in that the two routinely gathered satellite radar images used to construct the interferogram need not necessarily capture the event itself, but can cover a time period up to several months following the shot.

Foxwall, W.

2000-07-24T23:59:59.000Z

429

Manhattan Project: Science Images  

Office of Scientific and Technical Information (OSTI)

SCIENCE IMAGES SCIENCE IMAGES Resources > Photo Gallery Scroll down to see each of these images individually. The images are: 1. Fission (this graphic is adapted from a graphic originally produced by the Washington State Department of Health; the modifications are original to the History Division, now Office of History and Heritage Resources, 2003); 2. Fat Man (plutonium bomb), August 1945 (courtesy the U.S. Army Corps of Engineers (via theNational Archives)); 3. F Reactor Plutonium Production Complex Hanford, Washington, 1945; 4. A Cockroft-Walton machine at Los Alamos, New Mexico (courtesy the Los Alamos National Laboratory; it is reprinted in John F. Hogerton, ed., "Cockroft-Walton Machine," The Atomic Energy Deskbook (New York: Reinhold Publishing Corporation, 1963, prepared under the auspices of the Division of Technical Information, U.S. Atomic Energy Commission), 102);

430

Ferroelectric optical image comparator  

DOE Patents (OSTI)

The property of ferroelectric ceramics such as lead lanthanum zirconate titanate (PLZT) to store information has been known for many years. This relates to the property of ferroelectric ceramic materials to become permanently polarized when an electric signal is applied to the material. A ferroelectric optical image comparator has a lead lanthanum zirconate titanate thin-film device which is constructed with a semi-transparent or transparent conductive first electrode on one side of the thin film, a conductive metal second electrode on the other side of the thin film, and the second electrode is in contact with a nonconducting substrate. A photoinduced current in the device represents the dot product between a stored image and an image projected onto the first electrode. One-dimensional autocorrelations are performed by measuring this current while displacing the projected image. 5 figs.

Butler, M.A.; Land, C.E.; Martin, S.J.; Pfeifer, K.B.

1989-08-30T23:59:59.000Z

431

Resilient Image Fusion  

Science Conference Proceedings (OSTI)

The paper describes a distributed spectral-screening PCT algorithm for fusing hyper-spectral images in remote sensing applications. The algorithm provides intrusion tolerance from information warfare attacks using the notion of computational resiliency. ...

Tiranee Achalakul; Joohan Lee; Stephen Taylor

2000-08-01T23:59:59.000Z

432

Manhattan Project: People Images  

Office of Scientific and Technical Information (OSTI)

PEOPLE IMAGES PEOPLE IMAGES Resources > Photo Gallery Scroll down to see each of these images individually. The images are: 1. J. Robert Oppenheimer, Enrico Fermi, and Ernest Lawrence (courtesy the Lawrence Berkeley National Laboratory); 2. Hanford, Washington, workers sending money home (reproduced from the photo insert in F. G. Gosling, The Manhattan Project: Making the Atomic Bomb (Washington: History Division, Department of Energy, October 2001)); 3. Oppenheimer and Leslie Groves at the Trinity Site, September 1945 (reproduced from the cover of the Office of History and Heritage Resources publication: The Signature Facilities of the Manhattan Project (Washington: History Division, Department of Energy, 2001)); 4. A WAC detachment marching at Oak Ridge, Tennessee, June 1945 (courtesy the Army Corps of Engineers; it is reprinted in Rachel Fermi and Esther Samra, Picturing the Bomb: Photographs from the Secret World of the Manhattan Project (New York: Harry N. Abrams, Inc., Publishers, 1995), 40);

433

Imaging Fourier transform spectrometer  

DOE Patents (OSTI)

This invention is comprised of an imaging Fourier transform spectrometer having a Fourier transform infrared spectrometer providing a series of images to a focal plane array camera. The focal plane array camera is clocked to a multiple of zero crossing occurrences as caused by a moving mirror of the Fourier transform infrared spectrometer and as detected by a laser detector such that the frame capture rate of the focal plane array camera corresponds to a multiple of the zero crossing rate of the Fourier transform infrared spectrometer. The images are transmitted to a computer for processing such that representations of the images as viewed in the light of an arbitrary spectral ``fingerprint`` pattern can be displayed on a monitor or otherwise stored and manipulated by the computer.

Bennett, C.L.

1993-09-13T23:59:59.000Z

434

Overview of image reconstruction  

SciTech Connect

Image reconstruction (or computerized tomography, etc.) is any process whereby a function, f, on R/sup n/ is estimated from empirical data pertaining to its integrals, ..integral..f(x) dx, for some collection of hyperplanes of dimension k < n. The paper begins with background information on how image reconstruction problems have arisen in practice, and describes some of the application areas of past or current interest; these include radioastronomy, optics, radiology and nuclear medicine, electron microscopy, acoustical imaging, geophysical tomography, nondestructive testing, and NMR zeugmatography. Then the various reconstruction algorithms are discussed in five classes: summation, or simple back-projection; convolution, or filtered back-projection; Fourier and other functional transforms; orthogonal function series expansion; and iterative methods. Certain more technical mathematical aspects of image reconstruction are considered from the standpoint of uniqueness, consistency, and stability of solution. The paper concludes by presenting certain open problems. 73 references. (RWR)

Marr, R.B.

1980-04-01T23:59:59.000Z

435

Hierarchical image processing  

SciTech Connect

Most problems in image processing have structural aspects which are difficult to resolve using general methods. Use of heuristic methods is limited to cases where structural aspects are easy to resolve. An approach for hierarchical processing of images is described whereby structural aspects are resolved simultaneously with the analysis of data values. An effective use of a hierarchical structure puts strong restrictions upon information representation and operations. Information is represented in terms of compatibility of events, combined with a measure of confidence. Operations are of type symmetry operations, which allow data compression, context control and have a good descriptive power. The usefulness of these methods in image analysis and image processing is illustrated. 14 references.

Granlund, G.H.

1983-01-01T23:59:59.000Z

436

Image simulation using LOCUS  

SciTech Connect

The LOCUS data base program has been used to simulate images and to solve simple equations. This has been accomplished by making each record (which normally would represent a data entry)represent sequenced or random number pairs.

Strachan, J.D.; Roberts, J.A.

1989-09-01T23:59:59.000Z

437

Image Content Engine (ICE)  

SciTech Connect

The Image Content Engine (ICE) is being developed to provide cueing assistance to human image analysts faced with increasingly large and intractable amounts of image data. The ICE architecture includes user configurable feature extraction pipelines which produce intermediate feature vector and match surface files which can then be accessed by interactive relational queries. Application of the feature extraction algorithms to large collections of images may be extremely time consuming and is launched as a batch job on a Linux cluster. The query interface accesses only the intermediate files and returns candidate hits nearly instantaneously. Queries may be posed for individual objects or collections. The query interface prompts the user for feedback, and applies relevance feedback algorithms to revise the feature vector weighting and focus on relevant search results. Examples of feature extraction and both model-based and search-by-example queries are presented.

Brase, J M

2007-03-26T23:59:59.000Z

438

Nylsvley Site Image #1  

NLE Websites -- All DOE Office Websites (Extended Search)

Image NLS-1: Typical view of fine-leaved savanna at the Nylsvley study site, South Africa. (Dominant trees are Acacia tortilis. Photograph taken 1997 by Dr. R.J. Scholes, CSIR,...

439

Towoomba Site Image #1  

NLE Websites -- All DOE Office Websites (Extended Search)

Graphs Image TWM-1: General view of the Towoomba savanna grassland site, South Africa. (Photograph by Dr. R.J. Scholes, Forestek, CSIR, Pretoria, South Africa). Go to Site...

440

THERMAL NEUTRON BACKSCATTER IMAGING.  

DOE Green Energy (OSTI)

Objects of various shapes, with some appreciable hydrogen content, were exposed to fast neutrons from a pulsed D-T generator, resulting in a partially-moderated spectrum of backscattered neutrons. The thermal component of the backscatter was used to form images of the objects by means of a coded aperture thermal neutron imaging system. Timing signals from the neutron generator were used to gate the detection system so as to record only events consistent with thermal neutrons traveling the distance between the target and the detector. It was shown that this time-of-flight method provided a significant improvement in image contrast compared to counting all events detected by the position-sensitive {sup 3}He proportional chamber used in the imager. The technique may have application in the detection and shape-determination of land mines, particularly non-metallic types.

VANIER,P.; FORMAN,L.; HUNTER,S.; HARRIS,E.; SMITH,G.

2004-10-16T23:59:59.000Z

Note: This page contains sample records for the topic "radiance synthetic imaging" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

An extensive library of synthetic spectra covering the far red, RAVE and GAIA wavelength ranges  

E-Print Network (OSTI)

A library of 183588 synthetic spectra based on Kurucz's ATLAS9 models is presented for the far red spectral interval (7653 -- 8747\\AA). It is characterized by 3500 K grid of spectra is calculated for resolving powers 8500, 11500 and 20000. A section of the grid is also computed for [alpha/Fe]=+0.4 and for microturbulent velocities 0 and 4 km/s. The library covers the wavelength ranges and resolutions of the two ambitious spectroscopic surveys by the ground experiment RAVE and the space mission GAIA. Cross-sections across the multi-dimensional data-cube are used to illustrate the behaviour of the strongest spectral lines. Interpretation of real data will have to include interpolation to grid substeps. We present a simple estimate of the accuracy of such a procedure.

Zwitter, T; Munari, U; Zwitter, Tomaz; Castelli, Fiorella; Munari, Ulisse

2004-01-01T23:59:59.000Z

442

An extensive library of synthetic spectra covering the far red, RAVE and GAIA wavelength ranges  

E-Print Network (OSTI)

A library of 183588 synthetic spectra based on Kurucz's ATLAS9 models is presented for the far red spectral interval (7653 -- 8747\\AA). It is characterized by 3500 K grid of spectra is calculated for resolving powers 8500, 11500 and 20000. A section of the grid is also computed for [alpha/Fe]=+0.4 and for microturbulent velocities 0 and 4 km/s. The library covers the wavelength ranges and resolutions of the two ambitious spectroscopic surveys by the ground experiment RAVE and the space mission GAIA. Cross-sections across the multi-dimensional data-cube are used to illustrate the behaviour of the strongest spectral lines. Interpretation of real data will have to include interpolation to grid substeps. We present a simple estimate of the accuracy of such a procedure.

Tomaz Zwitter; Fiorella Castelli; Ulisse Munari

2004-01-07T23:59:59.000Z

443

A 500 MHz phase generator for synthetic aperture radar waveform synthesizers  

Science Conference Proceedings (OSTI)

A GaAs Phase Generator ASIC has been developed using GigaBit's SC10000 standard cell library which produces the quadratic phase necessary to generate a linear-FM chirp waveform. Fully functional chips have been fabricated using a 3-layer metal, 0.9 {mu}m gate E/D-MESFET process. Measured maximum accumulation rates vary from 450 MHz to 590 MHz. The chip is fully ECL and TTL compatible and is packaged in GigaBit's standard 132-pin ceramic package. The phase generator has been successfully tested in a prototype synthetic aperture radar at Sandia National Laboratories. Sample rates as high as 800 Msamples/sec have been synthesized using two phase generator/sine ROM combinations in parallel driving a TriQuint TQ6112 DAC. 5 refs., 5 figs.

Remund, B.L. (Sandia National Labs., Albuquerque, NM (United States)); Srivatsa, C.R. (GigaBit Logic, Newbury Park, CA (United States))

1991-01-01T23:59:59.000Z

444

THE EFFECT OF ANTISTATIC AGENTS ON FABRICS WOVEN FROM SYNTHETIC FIBRES  

SciTech Connect

Laboratory and field evaluations of protective clothing made with staple polyester fibre suggest that appreciable savings can be made in replacements and overall laundry costs, e.g., washing schedules, drying, and finishing times. An intrinsic disadvantage of synthetic fibres is their tendency to develop static electrical charges and an evaluation is made, by surface resistivity measurements, of antistatic agents. The effect of antistatic treatments on subsequent radiological decontamination procedures was determined on samples of fabric contaminated with soluble and insoluble radioactive media. It is concluded that syrthetic fibres can be readily and efficiently treated to reduce their surface resistivity to an acceptable level, and that such treatment has no adverse effect upon the laundering process. (auth)

Colclough, W.J.; Smith, A.J.; Wells, H.

1963-07-01T23:59:59.000Z

445

Environmentally based siting assessment for synthetic-liquid-fuels facilities. Final report  

DOE Green Energy (OSTI)

A detailed assessment of the major environmental constraints to siting a synthetic fuels industry and the results of that assessment are used to determine on a regional basis the potential for development of such an industry with minimal environmental conflicts. Secondly, the ability to mitigate some of the constraining impacts through alternative institutional arrangements, especially in areas that are judged to have a low development potential is also assessed. Limitations of the study are delineated, but specifically, the study is limited geographically to well-defined boundaries that include the prime coal and oil shale resource areas. The critical factors used in developing the framework are air quality, water availability, socioeconomic capacity, ecological sensitivity, environmental health, and the management of Federally owned lands. (MCW)

None

1980-01-01T23:59:59.000Z

446

Vulnerability reduction study. Coal and synthetics (Section III a). Technical Appendix  

DOE Green Energy (OSTI)

This Appendix supports and explains key statements made in the chapter on Coal and Synthetics. The reader will find information and documentation on points that lend themselves to quantification. Evidence is presented that coal supply will not be constrained by production or transportation factors through the 1980s. Any program to increase the direct use of coal in the industrial sector must take into account a number of identifiable difficulties. A deployment schedule for 10 oil shale projects has been developed by the Office of Technology Assessment. This schedule, if adhered to, would result in an initial deployment of an oil shale industry of 400,000 bpd oil equivalent by 1990. In addition, the Appendix provides descriptions of those major elements of Federal legislation that bear directly on coal, notably portions of the Powerplant and Industrial Fuel Use Act of 1978, the Energy Tax Act of 1978, the Energy Security Act of 1980, and the Clean Air Act.

Not Available

1980-08-01T23:59:59.000Z

447

Metabolic engineering of microorganisms for biofuels production: from bugs to synthetic biology to fuels  

SciTech Connect

The ability to generate microorganisms that can produce biofuels similar to petroleum-based transportation fuels would allow the use of existing engines and infrastructure and would save an enormous amount of capital required for replacing the current infrastructure to accommodate biofuels that have properties significantly different from petroleum-based fuels. Several groups have demonstrated the feasibility of manipulating microbes to produce molecules similar to petroleum-derived products, albeit at relatively low productivity (e.g. maximum butanol production is around 20 g/L). For cost-effective production of biofuels, the fuel-producing hosts and pathways must be engineered and optimized. Advances in metabolic engineering and synthetic biology will provide new tools for metabolic engineers to better understand how to rewire the cell in order to create the desired phenotypes for the production of economically viable biofuels.

Kuk Lee, Sung; Chou, Howard; Ham, Timothy S.; Soon Lee, Taek; Keasling, Jay D.

2009-12-02T23:59:59.000Z

448

Synthetic Catalysts for CO2 Storage: Catalytic Improvement of Solvent Capture Systems  

Science Conference Proceedings (OSTI)

IMPACCT Project: LLNL is designing a process to pull CO2 out of the exhaust gas of coal-fired power plants so it can be transported, stored, or utilized elsewhere. Human lungs rely on an enzyme known as carbonic anhydrase to help separate CO2 from our blood and tissue as part of the normal breathing process. LLNL is designing a synthetic catalyst with the same function as this enzyme. The catalyst can be used to quickly capture CO2 from coal exhaust, just as the natural enzyme does in our lungs. LLNL is also developing a method of encapsulating chemical solvents in permeable microspheres that will greatly increase the speed of binding of CO2. The goal of the project is an industry-ready chemical vehicle that can withstand the harsh environments found in exhaust gas and enable new, simple process designs requiring less capital investment.

None

2010-08-15T23:59:59.000Z

449

Imaging Structure With Fluid Fluxes At The Bradys Geothermal Field With  

Open Energy Info (EERE)

Imaging Structure With Fluid Fluxes At The Bradys Geothermal Field With Imaging Structure With Fluid Fluxes At The Bradys Geothermal Field With Satellite Interferometric Radar (Insar)- New Insights Into Reservoir Extent And Structural Controls Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Conference Paper: Imaging Structure With Fluid Fluxes At The Bradys Geothermal Field With Satellite Interferometric Radar (Insar)- New Insights Into Reservoir Extent And Structural Controls Details Activities (1) Areas (1) Regions (0) Abstract: We present a new example of Interferometric Synthetic Aperture Radar's (InSAR) remarkable utility for defining an operating geothermal reservoir's lateral extent and hydrologically active fracture systems. InSAR reveals millimeter-level surface change due to volume change in the reservoir and overlying aquifer systems caused by fluid pressure reduction

450

Effect of synthetic ANP on renal and loop of Henle functions in the young rat  

SciTech Connect

The present studies were undertaken to determine, by recollection micropuncture, the effect of a synthetic atrial natriuretic peptide (ANP) on the absolute and fractional deliveries of water and sodium to the juxtamedullary end-descending limb. Two groups of young female Munich-Wistar rats were studied: 1) control received the vehicle only; and 2) ANP received a prime followed by the constant infusion of a synthetic rat atrial peptide (28 amino acids). With the infusion of ANP, clearance of p-( UC)aminohippurate (( UC(PAH) and glomerular filtration rate (GFR) fell significantly. Despite this fall in GFR and renal plasma flow, ANP produced a 2-fold increase in urine volume and a 10-fold increase in sodium excretion. Absolute and fractional sodium deliveries to the end-descending limb increased by approx.30% in the ANP group, whereas mean juxtamedullary single-nephron glomerular filtration rate (SNGFR) remained stable. In three additional rats prepared for micropuncture of the superficial end-accessible proximal tubule, ANP reduced cortical SNGFR by approx.15%. By contrast, GFR did not decline in response to ANP in larger rats, when treated identically. The authors conclude that 1) in young rats ANP can produce a natriuresis in the absence of a rise in GFR; 2) the fall in GFR observed following ANP is due presumably to the immaturity of the animals used in these studies; and 3) ANP produces a rise in absolute and fractional water and sodium deliveries to the end-descending limb that cannot be attributed to a change in SNGFR. The relatively small rise in fractional sodium delivery to the end-descending limb, most probably due to inhibition of sodium and water reabsorption in the juxtamedullary proximal tubule and/or thin descending limb, accounts for only a smallproportion of sodium excretion in the final urine.

Roy, D.R.

1986-08-01T23:59:59.000Z

451

Multi-modality image correlation  

DOE Patents (OSTI)

This invention is comprised of an apparatus and method for location by location correlation of multiple images for Non-Destructive Evaluation (NDE) and other sources. Multiple images of a material specimen are displayed on one or more monitors of an interactive graphics system. Specimen landmarks are located in each image and mapping functions from a reference image to each other image are calculated using the landmark locations. A location selected by positioning a cursor in the reference image is mapped to the other images and location identifiers are simultaneously displayed in those images. Movement of the cursor in the references image causes simultaneous movement of the location identifiers in the other images to positions corresponding to the location of the reference image cursor.

Vaitekunas, J.J.; Roberts, R.A.

1988-08-25T23:59:59.000Z

452

STRUCTURAL ANNOTATION OF EM IMAGES BY GRAPH CUT  

Science Conference Proceedings (OSTI)

Biological images have the potential to reveal complex signatures that may not be amenable to morphological modeling in terms of shape, location, texture, and color. An effective analytical method is to characterize the composition of a specimen based on user-defined patterns of texture and contrast formation. However, such a simple requirement demands an improved model for stability and robustness. Here, an interactive computational model is introduced for learning patterns of interest by example. The learned patterns bound an active contour model in which the traditional gradient descent optimization is replaced by the more efficient optimization of the graph cut methods. First, the energy function is defined according to the curve evolution. Next, a graph is constructed with weighted edges on the energy function and is optimized with the graph cut algorithm. As a result, the method combines the advantages of the level set method and graph cut algorithm, i.e.,"topological" invariance and computational efficiency. The technique is extended to the multi-phase segmentation problem; the method is validated on synthetic images and then applied to specimens imaged by transmission electron microscopy(TEM).

Chang, Hang; Auer, Manfred; Parvin, Bahram

2009-05-08T23:59:59.000Z

453

MEDICAL IMAGE CONVERSION Peter Stanchev  

E-Print Network (OSTI)

MEDICAL IMAGE CONVERSION Peter Stanchev Institute of Mathematics, Bulgarian Academy of Sciences with the problem of converting medical images from one format to another. In solving it the structure of the most commonly used medical image formats are studied and analysed. A mechanism for medical image file conversion

Stanchev, Peter

454

Digital Image Authentication: A Review  

Science Conference Proceedings (OSTI)

Digital image authentication refers to all the techniques performing anti-falsification, digital image copyright protection, or access control. A large number of DIA techniques have been developed to authenticate digital images, including cryptography-based ... Keywords: Data Hiding, Digital Fingerprints, Forensic Science, Image Authentication, Watermarking

Chia-Hung Wei; Yue Li

2011-04-01T23:59:59.000Z

455

Argonne TDC: Imaging Technology Portfolios  

Emergency Response. Engineering. Environmental Research. Fuel Cells. Imaging Technology. Material Science. Nanotechnology. Physical Sciences. Sensor ...

456

System-level max power (SYMPO): a systematic approach for escalating system-level power consumption using synthetic benchmarks  

Science Conference Proceedings (OSTI)

To effectively design a computer system for the worst case power consumption scenario, system architects often use hand-crafted maximum power consuming benchmarks at the assembly language level. These stressmarks, also called power viruses, are very ... Keywords: synthetic benchmark, system-level power virus, thermal design point

Karthik Ganesan; Jungho Jo; W. Lloyd Bircher; Dimitris Kaseridis; Zhibin Yu; Lizy K. John

2010-09-01T23:59:59.000Z

457

State-of-the-art processes for manufacturing synthetic liquid fuels via the Fischer-Tropsch synthesis  

Science Conference Proceedings (OSTI)

Processes for manufacturing synthetic liquid fuels on the basis of the Fischer-Tropsch synthesis from alternative feedstock (natural gas, coal, biomass of various origins, etc.) are surveyed. State-of-the-art technology, companies that offer such processes, and the quality of products in comparison with their oil analogs, as well as economic features of the processes, are considered.

A.Y. Krylova; E.A. Kozyukov [NGK ITERA, Moscow (Russian Federation)

2007-12-15T23:59:59.000Z

458

The Evolution of Convective Storms from Their Footprints on the Sea as Viewed by Synthetic Aperture Radar from Space  

Science Conference Proceedings (OSTI)

SEASAT synthetic aperture radar (SAR) echoes from the sea have previously been shown to be the result of rain and winds produced by convective storms; rain damps the surface waves and causes echo-free holes, while the diverging winds associated ...

David Atlas; Peter G. Black

1994-07-01T23:59:59.000Z

459

The Caenorhabditis elegans Synthetic Multivulva Genes Prevent Ras Pathway Activation by Tightly Repressing Global Ectopic Expression of lin-3 EGF  

E-Print Network (OSTI)

The Caenorhabditis elegans class A and B synthetic multivulva (synMuv) genes redundantly antagonize an EGF/Ras pathway to prevent ectopic vulval induction. We identify a class A synMuv mutation in the promoter of the lin-3 ...

Saffer, Adam M.

460

A method to estimate the effect of deformable image registration uncertainties on daily dose mapping  

Science Conference Proceedings (OSTI)

Purpose: To develop a statistical sampling procedure for spatially-correlated uncertainties in deformable image registration and then use it to demonstrate their effect on daily dose mapping. Methods: Sequential daily CT studies are acquired to map anatomical variations prior to fractionated external beam radiotherapy. The CTs are deformably registered to the planning CT to obtain displacement vector fields (DVFs). The DVFs are used to accumulate the dose delivered each day onto the planning CT. Each DVF has spatially-correlated uncertainties associated with it. Principal components analysis (PCA) is applied to measured DVF error maps to produce decorrelated principal component modes of the errors. The modes are sampled independently and reconstructed to produce synthetic registration error maps. The synthetic error maps are convolved with dose mapped via deformable registration to model the resulting uncertainty in the dose mapping. The results are compared to the dose mapping uncertainty that would result from uncorrelated DVF errors that vary randomly from voxel to voxel. Results: The error sampling method is shown to produce synthetic DVF error maps that are statistically indistinguishable from the observed error maps. Spatially-correlated DVF uncertainties modeled by our procedure produce patterns of dose mapping error that are different from that due to randomly distributed uncertainties. Conclusions: Deformable image registration uncertainties have complex spatial distributions. The authors have developed and tested a method to decorrelate the spatial uncertainties and make statistical samples of highly correlated error maps. The sample error maps can be used to investigate the effect of DVF uncertainties on daily dose mapping via deformable image registration. An initial demonstration of this methodology shows that dose mapping uncertainties can be sensitive to spatial patterns in the DVF uncertainties.

Murphy, Martin J.; Salguero, Francisco J.; Siebers, Jeffrey V.; Staub, David; Vaman, Constantin [Department of Radiation Oncology, Virginia Commonwealth University, Richmond Virginia 23298 (United States)

2012-02-15T23:59:59.000Z

Note: This page contains sample records for the topic "radiance synthetic imaging" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

An Evaluation of Five ARW-WRF Microphysics Schemes Using Synthetic GOES Imagery for an Atmospheric River Event Affecting the California Coast  

Science Conference Proceedings (OSTI)

The main purpose of the present study is to assess the value of synthetic satellite imagery as a tool for model evaluation performance in addition to more traditional approaches. For this purpose, synthetic GOES-10 imagery at 10.7 ?m was produced ...

Isidora Jankov; Lewis D. Grasso; Manajit Sengupta; Paul J. Neiman; Dusanka Zupanski; Milija Zupanski; Daniel Lindsey; Donald W. Hillger; Daniel L. Birkenheuer; Renate Brummer; Huiling Yuan

2011-08-01T23:59:59.000Z

462

Manhattan Project: Events Images  

Office of Scientific and Technical Information (OSTI)

Resources Resources About this Site How to Navigate this Site Library Maps Note on Sources Nuclear Energy and the Public's Right to Know Photo Gallery Site Map Sources and Notes Suggested Readings EVENTS IMAGES Resources > Photo Gallery Page Content Here Scroll down to see each of these images individually. The images are: 1. Albert Einstein and Leo Szilard (courtesy the Federation of American Scientists); 2. Painting of CP-1 going critical (courtesy the National Archives); 3. An Alpha Racetrack inside the Y-12 Electromagnetic Plant, Clinton Engineer Works, Oak Ridge, Tennessee; 4. Eric Jette, Charles Critchfield, and J. Robert Oppenheimer, Los Alamos, New Mexico (this photograph is reprinted from Los Alamos Scientific Laboratory, Los Alamos: Beginning of an Era, 1943-1945 (Los Alamos: Public Relations Office, Los Alamos Scientific Laboratory, ca. 1967-1971), 20);

463

Turbine Imaging Technology Assessment  

DOE Green Energy (OSTI)

The goal of this project was to identify and evaluate imaging alternatives for observing the behavior of juvenile fish within an operating Kaplan turbine unit with a focus on methods to quantify fish injury mechanisms inside an operating turbine unit. Imaging methods are particularly needed to observe the approach and interaction of fish with turbine structural elements. This evaluation documents both the opportunities and constraints for observing juvenile fish at specific locations during turbine passage. The information may be used to acquire the scientific knowledge to make structural improvements and create opportunities for industry to modify turbines and improve fish passage conditions.

Moursund, Russell A.; Carlson, Thomas J.

2004-12-31T23:59:59.000Z

464

Multispectral thermal imaging  

SciTech Connect

Many remote sensing applications rely on imaging spectrometry. Here the authors use imaging spectrometry for thermal and multispectral signatures measured from a satellite platform enhanced with a combination of accurate calibrations and on-board data for correcting atmospheric distortions. The approach is supported by physics-based end-to-end modeling and analysis, which permits a cost-effective balance between various hardware and software aspects. The goal is to develop and demonstrate advanced technologies and analysis tools toward meeting the needs of the customer; at the same time, the attributes of this system can address other applications in such areas as environmental change, agriculture, and volcanology.

Weber, P.G.; Bender, S.C.; Borel, C.C.; Clodius, W.B.; Smith, B.W. [Los Alamos National Lab., NM (United States). Space and Remote Sensing Sciences Group; Garrett, A.; Pendergast, M.M. [Westinghouse Savannah River Corp., Aiken, SC (United States). Savannah River Technology Center; Kay, R.R. [Sandia National Lab., Albuquerque, NM (United States). Monitoring Systems and Technology Center

1998-12-01T23:59:59.000Z

465

Final Report: Detection and Characterization of Underground Facilities by Stochastic Inversion and Modeling of Data from the New Generation of Synthetic Aperture Satellites  

SciTech Connect

Many clandestine development and production activities can be conducted underground to evade surveillance. The purpose of the study reported here was to develop a technique to detect underground facilities by broad-area search and then to characterize the facilities by inversion of the collected data. This would enable constraints to be placed on the types of activities that would be feasible at each underground site, providing a basis the design of targeted surveillance and analysis for more complete characterization. Excavation of underground cavities causes deformation in the host material and overburden that produces displacements at the ground surface. Such displacements are often measurable by a variety of surveying or geodetic techniques. One measurement technique, Interferometric Synthetic Aperture Radar (InSAR), uses data from satellite-borne (or airborne) synthetic aperture radars (SARs) and so is ideal for detecting and measuring surface displacements in denied access regions. Depending on the radar frequency and the acquisition mode and the surface conditions, displacement maps derived from SAR interferograms can provide millimeter- to centimeter-level measurement accuracy on regional and local scales at spatial resolution of {approx}1-10 m. Relatively low-resolution ({approx}20 m, say) maps covering large regions can be used for broad-area detection, while finer resolutions ({approx}1 m) can be used to image details of displacement fields over targeted small areas. Surface displacements are generally expected to be largest during or a relatively short time after active excavation, but, depending on the material properties, measurable displacement may continue at a decreasing rate for a considerable time after completion. For a given excavated volume in a given geological setting, the amplitude of the surface displacements decreases as the depth of excavation increases, while the area of the discernable displacement pattern increases. Therefore, the ability to detect evidence for an underground facility using InSAR depends on the displacement sensitivity and spatial resolution of the interferogram, as well as on the size and depth of the facility and the time since its completion. The methodology development described in this report focuses on the exploitation of synthetic aperture radar data that are available commercially from a number of satellite missions. Development of the method involves three components: (1) Evaluation of the capability of InSAR to detect and characterize underground facilities ; (2) inversion of InSAR data to infer the location, depth, shape and volume of a subsurface facility; and (3) evaluation and selection of suitable geomechanical forward models to use in the inversion. We adapted LLNL's general-purpose Bayesian Markov Chain-Monte Carlo procedure, the 'Stochastic Engine' (SE), to carry out inversions to characterize subsurface void geometries. The SE performs forward simulations for a large number of trial source models to identify the set of models that are consistent with the observations and prior constraints. The inverse solution produced by this kind of stochastic method is a posterior probability density function (pdf) over alternative models, which forms an appropriate input to risk-based decision analyses to evaluate subsequent response strategies. One major advantage of a stochastic inversion approach is its ability to deal with complex, non-linear forward models employing empirical, analytical or numerical methods. However, while a geomechanical model must incorporate adequate physics to enable sufficiently accurate prediction of surface displacements, it must also be computationally fast enough to render the large number of forward realizations needed in stochastic inversion feasible. This latter requirement prompted us first to investigate computationally efficient empirical relations and closed-form analytical solutions. However, our evaluation revealed severe limitations in the ability of existing empirical and analytical forms to predict deformations from undergro

Foxall, W; Cunningham, C; Mellors, R; Templeton, D; Dyer, K; White, J

2012-02-27T23:59:59.000Z

466

Normalization method for video images  

DOE Patents (OSTI)

The present invention relates to a method and apparatus for automatically and adaptively normalizing analog signals representative of video images in object detection systems. Such normalization maximizes the average information content of the video images and, thereby, provides optimal digitized images for object detection and identification. The present invention manipulates two system control signals -- gain control signal and offset control signal -- to convert an analog image signal into a transformed analog image signal, such that the corresponding digitized image contains the maximum amount of information achievable with a conventional object detection system. In some embodiments of the present invention, information content is measured using parameters selected from image entropy, image mean, and image variance.

Donohoe, G.W.; Hush, D.R.

1992-12-31T23:59:59.000Z

467

Modern Imaging Technology: Recent Advances  

SciTech Connect

This 2-day conference is designed to bring scientist working in nuclear medicine, as well as nuclear medicine practitioners together to discuss the advances in four selected areas of imaging: Biochemical Parameters using Small Animal Imaging, Developments in Small Animal PET Imaging, Cell Labeling, and Imaging Angiogenesis Using Multiple Modality. The presentations will be on molecular imaging applications at the forefront of research, up to date on the status of molecular imaging in nuclear medicine as well as in related imaging areas. Experts will discuss the basic science of imaging techniques, and scheduled participants will engage in an exciting program that emphasizes the current status of molecular imaging as well as the role of DOE funded research in this area.

Welch, Michael J.; Eckelman, William C.

2004-06-18T23:59:59.000Z

468

Fundamentals of Image Processing  

E-Print Network (OSTI)

· Histogram processing #12;Digital images · Sample the 2D space on a regular grid · Quantize each sample. · Bigger numbers are (usually) brighter · Transfer function: function that maps input pixel value into a pixel? · LCD: backlight intensity, transmission efficiency (

Erdem, Erkut

469

Multidimensional image retargeting  

Science Conference Proceedings (OSTI)

Retargeting refers to the process by which an image or video is adapted from the display device for which it was meant (target display) to another one (retarget display). The retarget display has different features from the target one such as dynamic ...

Francesco Banterle; Alessandro Artusi; Tunç O. Aydin; Piotr Didyk; Elmar Eisemann; Diego Gutierrez; Rafal Mantiuk; Karol Myszkowski

2011-12-01T23:59:59.000Z

470

Image processing and reconstruction  

SciTech Connect

This talk will examine some mathematical methods for image processing and the solution of underdetermined, linear inverse problems. The talk will have a tutorial flavor, mostly accessible to undergraduates, while still presenting research results. The primary approach is the use of optimization problems. We will find that relaxing the usual assumption of convexity will give us much better results.

Chartrand, Rick [Los Alamos National Laboratory

2012-06-15T23:59:59.000Z

471

High dynamic range imaging  

Science Conference Proceedings (OSTI)

Current display devices can display only a limited range of contrast and colors, which is one of the main reasons that most image acquisition, processing, and display techniques use no more than eight bits per color channel. This course outlines recent ...

Paul Debevec; Erik Reinhard; Greg Ward; Sumanta Pattanaik

2004-08-01T23:59:59.000Z

472

Multicomponent Synthetic Polymers with Viral-Mimetic Chemistry for Nucleic Acid Delivery  

E-Print Network (OSTI)

7.3 (Bruker Nano), or SPIP version 3.3.6 (Image Metrology A/S, Denmark). Fluorescence Microscopy plasmid DNA was complexed as previously described. For the fluorescence microscopy (FM) experiments, 12 to fluorescence microscopy investigation. For nuclei staining, 1 drop of DAPI standard stain solution was added

Li, Jingpeng

473

Investigation of iron opacity experiment plasma gradients with synthetic data analyses  

Science Conference Proceedings (OSTI)

Experiments have been performed at Sandia National Laboratories Z-facility to validate iron opacity models relevant to the solar convection/radiation zone boundary. Sample conditions were measured by mixing Mg with the Fe and using Mg K-shell line transmission spectra, assuming that the plasma was uniform. We develop a spectral model that accounts for hypothetical gradients, and compute synthetic spectra to quantitatively evaluate the plasma gradient size that can be diagnosed. Two sample designs are investigated, assuming linear temperature and density gradients. First, Mg uniformly mixed with Fe enables temperature gradients greater than 10% to be detected. The second design uses Mg mixed into one side and Al mixed into the other side of the sample in an attempt to more accurately infer the sample gradient. Both temperature and density gradients as small as a few percent can be detected with this design. Experiments have successfully recorded spectra with the second design. In future research, the spectral model will be used to place bounds on gradients that exist in Z opacity experiments.

Nagayama, T.; Bailey, J. E.; Rochau, G. A.; Hansen, S. B. [Sandia National Laboratories, Albuquerque, New Mexico 87185 (United States); Mancini, R. C. [Physics Department, University of Nevada, Reno, Nevada 89557 (United States); MacFarlane, J. J.; Golovkin, I. [Prism Computational Sciences, Madison, Wisconsin 53703 (United States)

2012-10-15T23:59:59.000Z

474

Biquadratic coupling effect on magnetoresistance response curves of spin valves with a synthetic antiferromagnet  

SciTech Connect

Both normal and inverse magnetoresistance (MR) response curves were observed for synthetic spin valves with the structure of Si(100)/Ru/Co(t{sub 1})/Ru(0.7nm)/Co(t{sub 2})/Cu(3nm)/Co(t{sub 3})/Ru. Under the assumption of a coherent rotation of the magnetization in the three Co layers, the hysteresis loops, magnetization response, and MR response curves were calculated as a function of the parameters of the system. The parameters include antiferromagnetic coupling of Co(t{sub 1}) and Co(t{sub 2}) through Ru layer, a weak ferromagnetic coupling of Co(t{sub 2}) and Co(t{sub 3}) through Cu spacer, giant magnetoresistance of the Co/Cu/Co and Co/Ru/Co systems, and AMR contribution of each Co layer. The uniaxial anisotropy of each Co layer and a distribution of the coupling strength of Co(t{sub 1})/Ru/Co(t{sub 2}) were also included. To fit the experimental data well, it was necessary to include a biquadratic coupling in the Co(t{sub 1})/Ru/Co(t{sub 2}) trilayer. {copyright} 2001 American Institute of Physics.

Zhang, K.; Kai, T.; Zhao, T.; Fujiwara, H.; Mankey, G. J.

2001-06-01T23:59:59.000Z

475

From Clarkia to Escherichia and Janus: the physics of natural and synthetic active colloids  

E-Print Network (OSTI)

An active colloid is a suspension of particles that transduce free energy from their environment and use the energy to engage in intrinsically non-equilibrium activities such as growth, replication and self-propelled motility. An obvious example of active colloids is a suspension of bacteria such as Escherichia coli, their physical dimensions being almost invariably in the colloidal range. Synthetic self-propelled particles have also become available recently, such as two-faced, or Janus, particles propelled by differential chemical reactions on their surfaces driving a self-phoretic motion. In these lectures, I give a pedagogical introduction to the physics of single-particle and collective properties of active colloids, focussing on self propulsion. I will compare and contrast phenomena in suspensions of `swimmers' with the behaviour of suspensions of passive particles, where only Brownian motion (discovered by Robert Brown in granules from the pollen of the wild flower {\\it Clarkia pulchella}) is relevant. I will pay particular attention to issues that pertain to performing experiments using these active particle suspensions, such as how to characterise the suspension's swimming speed distribution, and include an appendix to guide physicists wanting to start culturing motile bacteria.

W C K Poon

2013-06-20T23:59:59.000Z

476

Using synthetic emission maps to constrain the structure of the Milky Way  

E-Print Network (OSTI)

We present the current standing of an investigation into the structure of the Milky Way. We use smoothed particle hydrodynamics (SPH) to simulate the ISM gas in the Milky Way under the effect of a number of different gravitational potentials representing the spiral arms and nuclear bars, both fixed and time-dependent. The gas is subject to ISM cooling and chemistry, enabling us to track the CO and HI density. We use a 3D grid-based radiative transfer code to simulate the emission from the SPH output, allowing for the construction of synthetic longitude-velocity maps as viewed from the Earth. By comparing these maps with the observed emission in CO and HI from the Milky Way (Dame et al. 2001, Kalberla et al. 2005), we can infer the arm/bar geometry that provides a best fit to our Galaxy. By doing so we aim to answer key questions concerning the morphology of the Milky Way such as the number of the spiral arms, the pattern speeds of the bar(s) and arms, the pitch angle of the arms and shape of the bar(s)

Pettitt, Alex; Acreman, David; Price, Daniel

2013-01-01T23:59:59.000Z

477

Behavior of Concrete Panels Reinforced with Synthetic Fibers, Mild Steel, and GFRP Composites Subjected to Blasts  

SciTech Connect

The paper presents experimental data generated for calibrating finite element models to predict the performance of reinforced concrete panels with a wide range of construction details under blast loading. The specimens were 1.2 m square panels constructed using Normal Weight Concrete (NWC) or Fiber Reinforced Concrete (FRC). FRC consisted of macro-synthetic fibers dispersed in NWC. Five types of panels were tested: NWC panels with steel bars; FRC panels without additional reinforcement; FRC panels with steel bars; NWC panels with glass fiber reinforced polymer (GFRP) bars; and NWC panels reinforced with steel bars and external GFRP laminates on both faces. Each panel type was constructed with three thicknesses: 152 mm, 254 mm, and 356 mm. FRC panels with steel bars had the best performance for new construction. NWC panels reinforced with steel bars and external GFRP laminates on both faces had the best performance for strengthening or rehabilitation of existing structures. The performance of NWC panels with GFRP bars was strongly influenced by the bar spacing. The behavior of the panels is classified in terms of damage using immediate occupancy, life safety, and near collapse performance levels. Preliminary dynamic simulations are compared to the experimental results.

C. P. Pantelides; T. T. Garfield; W. D. Richins; T. K. Larson; J. E. Blakeley

2012-03-01T23:59:59.000Z

478

Large Hybrid Energy Systems for Making Low CO2 Load-Following Power and Synthetic Fuel  

SciTech Connect

Hybrid energy systems using nuclear heat sources can economically produce load-following electrical power by exploiting the surplus generation capacity available at night or seasonally to make synthetic fuel. Vehicle fuel is the only current energy use large enough to absorb all the energy capacity that might be diverted from the power industry, and its ease of storage obviates problems with discontinuous synfuel production. The potential benefits and challenges of synfuels integration are illustrated by the production of methanol from natural gas (as a source of carbon) using steam from a light water nuclear power reactor which is assumed to be available in accord with a year's worth of power demand data. Methanol's synthesis process is easily adapted to using 300 C heat from a light water reactor and this simple compound can be further processed into gasoline, biodiesel, or dimethyl ether, fuels which can be used with the current vehicle fleet. A supplemental feed to the methanol process of natural gas (for energy) allows operation at constant full rate when the nuclear heat is being used to produce electrical power. The higher capital costs of such a system are offset by a lower cost of heat and power production from a large base load type of plant and by reduced costs associated with much lower CO2 emissions. Other less tangible economic benefits of this and similar hybrid systems include better use of natural resource for fuels and greater energy services security from the domestic production of vehicle fuel.

Robert S. Cherry; Richard D. Boardman; Steven Aumeier

2012-02-01T23:59:59.000Z

479

Imaging agents for in vivo magnetic resonance and scintigraphic imaging  

DOE Patents (OSTI)

Methods are provided for in vivo magnetic resonance imaging and/or scintigraphic imaging of a subject using chelated transition metal and lanthanide metal complexes. Novel ligands for these complexes are provided.

Engelstad, Barry L. (Orinda, CA); Raymond, Kenneth N. (Berkeley, CA); Huberty, John P. (Corte Madera, CA); White, David L. (Oakland, CA)

1991-01-01T23:59:59.000Z

480

Application of the multiple image radiography method to breast imaging  

Science Conference Proceedings (OSTI)

The Multiple Image Radiography (MIR) method is new imaging modality that extends the capability of conventional absorption based radiography by adding the additional contrast mechanisms of x-ray refraction and ultra-small angle scatter. In order to design ...

Christopher Parham; Etta Pisano; Chad Livasy; Laura Faulconer; Miles Wernick; Jovan Brankov; Miklos Kiss; Dean Connor; Jeddy Chen; Ann Wu; Zhong Zhong; Dean Chapman

2006-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "radiance synthetic imaging" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Imaging agents for in vivo magnetic resonance and scintigraphic imaging  

DOE Patents (OSTI)

Methods are provided for in vivo magnetic resonance imaging and/or scintigraphic imaging of a subject using chelated transition metal and lanthanide metal complexes. Novel ligands for these complexes are provided. No Drawings

Engelstad, B.L.; Raymond, K.N.; Huberty, J.P.; White, D.L.

1991-04-23T23:59:59.000Z

482

Mesoscale Cloud State Estimation from Visible and Infrared Satellite Radiances  

Science Conference Proceedings (OSTI)

This study focuses on cloudy atmosphere state estimation from high-resolution visible and infrared satellite remote sensing measurements and a mesoscale model with explicit cloud prediction. The cloud state is defined as 3D spatially distributed ...

T. Vukicevic; T. Greenwald; M. Zupanski; D. Zupanski; T. Vonder Haar; A. S. Jones

2004-12-01T23:59:59.000Z

483

Scene Radiance–Dependent Intersatellite Biases of HIRS Longwave Channels  

Science Conference Proceedings (OSTI)

Measurements from the simultaneous nadir overpass (SNO) observations of the High Resolution Infrared Radiation Sounder (HIRS) are examined. The SNOs are the measurements taken at the orbital intersections of each pair of satellites viewing the ...

Lei Shi; John J. Bates; Changyong Cao

2008-12-01T23:59:59.000Z

484

Radiance cache splatting: a GPU-friendly global illumination algorithm  

Science Conference Proceedings (OSTI)

Fast global illumination computation is a challenge in several fields such as lighting simulation and computergenerated visual effects for movies. To this end, the irradiance caching algorithm is commonly used since it provides high-quality rendering ...

Pascal Gautron; Jaroslav K?ivánek; Kadi Bouatouch; Sumanta Pattanaik

2008-08-01T23:59:59.000Z

485

Modtran radiance modeling of multi-angle worldview-2 imagery .  

E-Print Network (OSTI)

??The WorldView-2 satellite, launched in 2010 by DigitalGlobe, provides researchers with the ability to collect high resolution, multi-angle, 8-band multispectral imagery. This offers a unique… (more)

Marshall, Samuel I.

2013-01-01T23:59:59.000Z

486

The Spectral Radiance Experiment (SPECTRE): Project Description and Sample Results  

Science Conference Proceedings (OSTI)

The fundamental climatic role of radiative processes has spurred the development of increasingly sophisticated models of radiative transfer in the earth-atmosphere system. Since the basic physics of radiative transfer is rather well known, this ...

Robert G. Ellingson; Warren J. Wiscombe

1996-09-01T23:59:59.000Z

487

Surface Albedo over the Sahel from METEOSAT Radiances  

Science Conference Proceedings (OSTI)

A method to estimate surface albedo in the African Sahel is proposed and discussed. This method, which uses METEOSAT imagery and routine surface global radiation measurement is shown to be relevant for climatological studies.

Bernard Pinty; Gérard Szejwach; Jacques Stum

1985-02-01T23:59:59.000Z

488

No-Reference image quality assessment for facial images  

Science Conference Proceedings (OSTI)

Image quality assessment traditionally means the comparison of original image with its distorted version using conventional methods like Mean Square Error (MSE) or Peak Signal to Noise Ratio (PSNR). In case of Blind Quality Evaluation with no prior knowledge ... Keywords: contrast, eye visibility, image quality assessment, luminance, no-reference, noise, sharpness

Debalina Bhattacharjee; Surya Prakash; Phalguni Gupta

2011-08-01T23:59:59.000Z

489

Non local image denoising using image adapted neighborhoods  

Science Conference Proceedings (OSTI)

In recent years several non-local image denoising methods were proposed in the literature. These methods compute the denoised image as a weighted average of pixels across the whole image (in practice across a large area around the pixel to be denoised). ...

Álvaro Pardo

2010-11-01T23:59:59.000Z

490

Imaging (XSD) | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Real Time Radiography, Phase Contrast Imaging, Transmission X-ray Microscopy and nano-CT, and X-ray Micro-tomography. The Imaging group is also responsible for the design...

491

Filtering in SPECT image reconstruction  

Science Conference Proceedings (OSTI)

Single photon emission computed tomography (SPECT) imaging is widely implemented in nuclear medicine as its clinical role in the diagnosis and management of several diseases is, many times, very helpful (e.g., myocardium perfusion imaging). The quality ...

Maria Lyra; Agapi Ploussi

2011-01-01T23:59:59.000Z

492

Advanced Measurement Laboratory Image Gallery  

Science Conference Proceedings (OSTI)

... This NIST-developed instrument, a scanning electron microscope with spin polarization analysis, is the highest resolution magnetization imaging ...

2010-10-05T23:59:59.000Z

493

Inference of Cirrus Cloud Properties Using Satellite-observed Visible and Infrared Radiances. Part I: Parameterization of Radiance Fields  

Science Conference Proceedings (OSTI)

Current techniques for deriving cirrus optical depth and altitude from visible (0.65 ?m) and infrared (11.5 ?m) satellite data use radiative transfer calculations based on scattering phase functions of spherical water droplets. This study ...

Patrick Minnis; Kuo-Nan Liou; Yoshihide Takano

1993-05-01T23:59:59.000Z

494

Review Article The Role of Synthetic Biology in the Design of Microbial Cell Factories for Biofuel Production  

E-Print Network (OSTI)

License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Insecurity in the supply of fossil fuels, volatile fuel prices, and major concerns regarding climate change have sparked renewed interest in the production of fuels from renewable resources. Because of this, the use of biodiesel has grown dramatically during the last few years and is expected to increase even further in the future. Biodiesel production through the use of microbial systems has marked a turning point in the field of biofuels since it is emerging as an attractive alternative to conventional technology. Recent progress in synthetic biology has accelerated the ability to analyze, construct, and/or redesign microbial metabolic pathways with unprecedented precision, in order to permit biofuel production that is amenable to industrial applications. The review presented here focuses specifically on the role of synthetic biology in the design of microbial cell factories for efficient production of biodiesel. 1.

Verónica Leticia Colin; Analía Rodríguez; Héctor Antonio Cristóbal

2011-01-01T23:59:59.000Z

495

User Science Images  

NLE Websites -- All DOE Office Websites (Extended Search)

PorousMedia3medres.png PorousMedia3medres.png ASCR: Carbon Dioxide Sequestration September 14, 2009 | Author(s): G. S. H. Pau, J. B. Bell, K. Pruess, A. S. Almgren, M. J. Lijewski, and K. Zhang | Category: Environmental Science | URL: http://esd.lbl.gov/research/projects/tough/documentation/proceedings/ Download Image: PorousMedia3medres.png | png | 159 KB Simulation of density-driven flow for CO2 storage in saline aquifers. Shown is a snapshot of the CO2 concentration after onset of convection overlayed on the AMR grid. Image courtesy of George Pau and John Bell (LBNL). Repo mp111 marcdayhydrogenflame.jpg ASCR: Lab-scale Flame Simulation September 1, 2009 | Author(s): M.S.Day, J.B. Bell, R.K. Cheng, S. Tachibana, V.E. Beckner and M.J. Lijewski (LBNL) | Category: Combustion | URL: https://apdec.org/APDEC_Progress_Fall09.shtml

496

Dynamic Radiographic Imaging  

Science Conference Proceedings (OSTI)

A radiographic system recently developed by American and Russian collaborators is designed to capture multiple images of a dynamic event lasting less than 10 microseconds. Various optical and electro-optical components were considered and their performance compared. The final system employed a solid crystal of lutetium oxyorthosilicate doped with cerium (LSO:Ce or LSO) for X-ray-to-light conversion with a coherent fiber optic bundle to relay the scintillator image to a streak camera with charge coupled device (CCD) readout. Resolution and sensitivity studies were carried out for this system on two different sources of X-rays: a 20 MeV microtron and a 70 MeV betatron.

Volkov, A.; Turley, D.; Veeser, L.; Lukyanov, N.; Yegorov, N.; Baker, S.A.; Mirenko, V.; Lewis, W.; Kuropatkin, Y.

1999-06-01T23:59:59.000Z

497

Imaging alpha particle detector  

DOE Patents (OSTI)

A method and apparatus for detecting and imaging alpha particles sources is described. A conducting coated high voltage electrode (1) and a tungsten wire grid (2) constitute a diode configuration discharge generator for electrons dislodged from atoms or molecules located in between these electrodes when struck by alpha particles from a source (3) to be quantitatively or qualitatively analyzed. A thin polyester film window (4) allows the alpha particles to pass into the gas enclosure and the combination of the glass electrode, grid and window is light transparent such that the details of the source which is imaged with high resolution and sensitivity by the sparks produced can be observed visually as well. The source can be viewed directly, electronically counted or integrated over time using photographic methods. A significant increase in sensitivity over other alpha particle detectors is observed, and the device has very low sensitivity to gamma or beta emissions which might otherwise appear as noise on the alpha particle signal.

Anderson, David F. (Los Alamos, NM)

1985-01-01T23:59:59.000Z

498

WIPP - Passive Institutional Controls (PICs) Images  

NLE Websites -- All DOE Office Websites (Extended Search)

PICs Images Passive Institutional Controls PICs Images Permanent Markers | Images from Monument Survey Permanent Markers Earthen Berm The "big picture" Repository footprint Buried...

499

Full Size Image - Energy Innovation Portal  

Bookmark Full Size Image - Energy Innovation Portal on Google; Bookmark Full Size Image - Energy Innovation Portal on Delicious; Rank Full Size Image ...

500

Medical gamma ray imaging  

DOE Patents (OSTI)

A method and apparatus for determining the distribution of a position-emitting radioisotope into an object, the apparatus consisting of a wire mesh radiation converter, an ionizable gas for propagating ionization events caused by electrodes released by the converter, a drift field, a spatial position detector and signal processing circuitry for correlating near-simultaneous ionization events and determining their time differences, whereby the position sources of back-to-back collinear radiation can be located and a distribution image constructed.

Osborne, Louis S. (Lexington, MA); Lanza, Richard C. (Brookline, MA)

1984-01-01T23:59:59.000Z