Powered by Deep Web Technologies
Note: This page contains sample records for the topic "quality check results" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Quality Control Quantification (QCQ): A Tool to Measure the Value of Quality Control Checks in Radiation Oncology  

SciTech Connect (OSTI)

Purpose: To quantify the error-detection effectiveness of commonly used quality control (QC) measures. Methods: We analyzed incidents from 2007-2010 logged into a voluntary in-house, electronic incident learning systems at 2 academic radiation oncology clinics. None of the incidents resulted in patient harm. Each incident was graded for potential severity using the French Nuclear Safety Authority scoring scale; high potential severity incidents (score >3) were considered, along with a subset of 30 randomly chosen low severity incidents. Each report was evaluated to identify which of 15 common QC checks could have detected it. The effectiveness was calculated, defined as the percentage of incidents that each QC measure could detect, both for individual QC checks and for combinations of checks. Results: In total, 4407 incidents were reported, 292 of which had high-potential severity. High- and low-severity incidents were detectable by 4.0 {+-} 2.3 (mean {+-} SD) and 2.6 {+-} 1.4 QC checks, respectively (P<.001). All individual checks were less than 50% sensitive with the exception of pretreatment plan review by a physicist (63%). An effectiveness of 97% was achieved with 7 checks used in combination and was not further improved with more checks. The combination of checks with the highest effectiveness includes physics plan review, physician plan review, Electronic Portal Imaging Device-based in vivo portal dosimetry, radiation therapist timeout, weekly physics chart check, the use of checklists, port films, and source-to-skin distance checks. Some commonly used QC checks such as pretreatment intensity modulated radiation therapy QA do not substantially add to the ability to detect errors in these data. Conclusions: The effectiveness of QC measures in radiation oncology depends sensitively on which checks are used and in which combinations. A small percentage of errors cannot be detected by any of the standard formal QC checks currently in broad use, suggesting that further improvements are needed. These data require confirmation with a broader incident-reporting database.

Ford, Eric C., E-mail: eford@uw.edu [Department of Radiation Oncology and Molecular Radiation Sciences, Johns Hopkins University, Baltimore, Maryland (United States); Terezakis, Stephanie; Souranis, Annette; Harris, Kendra [Department of Radiation Oncology and Molecular Radiation Sciences, Johns Hopkins University, Baltimore, Maryland (United States)] [Department of Radiation Oncology and Molecular Radiation Sciences, Johns Hopkins University, Baltimore, Maryland (United States); Gay, Hiram; Mutic, Sasa [Department of Radiation Oncology, Washington University, St. Louis, Missouri (United States)] [Department of Radiation Oncology, Washington University, St. Louis, Missouri (United States)

2012-11-01T23:59:59.000Z

2

COS DCE BOOT FSW v1.13 Component Test Results Requirement 5.5.1.3 Check Upload Integrity  

E-Print Network [OSTI]

COS DCE BOOT FSW v1.13 Component Test Results Requirement 5.5.1.3 Check Upload Integrity Date. Brownsberger 2-13-01 The Center for Astrophysics and Space Astronomy Reviewed: Approved: COS DCE BOOT FSW v1 Initial Release COS DCE BOOT FSW v1.13 Component Test Results Requirement 5.5.1.3 Check Upload Integrity

Colorado at Boulder, University of

3

COS DCE BOOT FSW v1.09 Component Test Results Requirement 5.5.1.3 Check Upload Integrity  

E-Print Network [OSTI]

COS DCE BOOT FSW v1.09 Component Test Results Requirement 5.5.1.3 Check Upload Integrity Date. Brownsberger 2-13-01 The Center for Astrophysics and Space Astronomy Reviewed: Approved: COS DCE BOOT FSW v1 Initial Release COS DCE BOOT FSW v1.09 Component Test Results Requirement 5.5.1.3 Check Upload Integrity

Colorado at Boulder, University of

4

Level 2.0 Quality Control Checklist 1. Instrument Performance Check: Evaluate data for occurrences of instrument failure  

E-Print Network [OSTI]

of transparency in the UV in early morning or late afternoon due to filter leakage or degradation; or sudden Check (or Vo Check): Evaluate pre- and post-field calibration to determine if filter degradation or non increases and decreases of the AOD in the UV channels due to electronic problems). 5. Cloud Contamination

5

Global optimization of data quality checks on 2-D and 3-D networks of GPR cross-well tomographic data for automatic correction of unknown well deviations  

SciTech Connect (OSTI)

Significant errors related to poor time zero estimation, well deviation or mislocation of the transmitter (TX) and receiver (RX) stations can render even the most sophisticated modeling and inversion routine useless. Previous examples of methods for the analysis and correction of data errors in geophysical tomography include the works of Maurer and Green (1997), Squires et al. (1992) and Peterson (2001). Here we follow the analysis and techniques of Peterson (2001) for data quality control and error correction. Through our data acquisition and quality control procedures we have very accurate control on the surface locations of wells, the travel distance of both the transmitter and receiver within the boreholes, and the change in apparent zero time. However, we often have poor control on well deviations, either because of economic constraints or the nature of the borehole itself prevented the acquisition of well deviation logs. Also, well deviation logs can sometimes have significant errors. Problems with borehole deviations can be diagnosed prior to inversion of travel-time tomography data sets by plotting the apparent velocity of a straight ray connecting a transmitter (TX) to a receiver (RX) against the take-off angle of the ray. Issues with the time-zero pick or distances between wells appear as symmetric smiles or frown in these QC plots. Well deviation or dipping-strong anisotropy will result in an asymmetric correlation between apparent velocity and take-off angle (Figure 1-B). In addition, when a network of interconnected GPR tomography data is available, one has the additional quality constraint of insuring that there is continuity in velocity between immediately adjacent tomograms. A sudden shift in the mean velocity indicates that either position deviations are present or there is a shift in the pick times. Small errors in well geometry may be effectively treated during inversion by including weighting, or relaxation, parameters into the inversion (e.g. Bautu et al., 2006). In the technique of algebraic reconstruction tomography (ART), which is used herein for the travel time inversion (Peterson et al., 1985), a small relaxation parameter will smooth imaging artifacts caused by data errors at the expense of resolution and contrast (Figure 2). However, large data errors such as unaccounted well deviations cannot be adequately suppressed through inversion weighting schemes. Previously, problems with tomograms were treated manually. However, in large data sets and/or networks of data sets, trial and error changes to well geometries become increasingly difficult and ineffective. Mislocation of the transmitter and receiver stations of GPR cross-well tomography data sets can lead to serious imaging artifacts if not accounted for prior to inversion. Previously, problems with tomograms have been treated manually prior to inversion. In large data sets and/or networks of tomographic data sets, trial and error changes to well geometries become increasingly difficult and ineffective. Our approach is to use cross-well data quality checks and a simplified model of borehole deviation with particle swarm optimization (PSO) to automatically correct for source and receiver locations prior to tomographic inversion. We present a simple model of well deviation, which is designed to minimize potential corruption of actual data trends. We also provide quantitative quality control measures based on minimizing correlations between take-off angle and apparent velocity, and a quality check on the continuity of velocity between adjacent wells. This methodology is shown to be accurate and robust for simple 2-D synthetic test cases. Plus, we demonstrate the method on actual field data where it is compared to deviation logs. This study shows the promise for automatic correction of well deviations in GPR tomographic data. Analysis of synthetic data shows that very precise estimates of well deviation can be made for small deviations, even in the presence of static data errors. However, the analysis of the synthetic data and the application of

Sassen, D. S.; Peterson, J. E.

2010-03-15T23:59:59.000Z

6

Improving spot-scanning proton therapy patient specific quality assurance with HPlusQA, a second-check dose calculation engine  

SciTech Connect (OSTI)

Purpose: The purpose of this study was to validate the use of HPlusQA, spot-scanning proton therapy (SSPT) dose calculation software developed at The University of Texas MD Anderson Cancer Center, as second-check dose calculation software for patient-specific quality assurance (PSQA). The authors also showed how HPlusQA can be used within the current PSQA framework.Methods: The authors compared the dose calculations of HPlusQA and the Eclipse treatment planning system with 106 planar dose measurements made as part of PSQA. To determine the relative performance and the degree of correlation between HPlusQA and Eclipse, the authors compared calculated with measured point doses. Then, to determine how well HPlusQA can predict when the comparisons between Eclipse calculations and the measured dose will exceed tolerance levels, the authors compared gamma index scores for HPlusQA versus Eclipse with those of measured doses versus Eclipse. The authors introduce the ??? transformation as a way to more easily compare gamma scores.Results: The authors compared measured and calculated dose planes using the relative depth, z/R × 100%, where z is the depth of the measurement and R is the proton beam range. For relative depths than less than 80%, both Eclipse and HPlusQA calculations were within 2 cGy of dose measurements on average. When the relative depth was greater than 80%, the agreement between the calculations and measurements fell to 4 cGy. For relative depths less than 10%, the Eclipse and HPlusQA dose discrepancies showed a negative correlation, ?0.21. Otherwise, the correlation between the dose discrepancies was positive and as large as 0.6. For the dose planes in this study, HPlusQA correctly predicted when Eclipse had and had not calculated the dose to within tolerance 92% and 79% of the time, respectively. In 4 of 106 cases, HPlusQA failed to predict when the comparison between measurement and Eclipse's calculation had exceeded the tolerance levels of 3% for dose and 3 mm for distance-to-agreement.Conclusions: The authors found HPlusQA to be reasonably effective (79%± 10%) in determining when the comparison between measured dose planes and the dose planes calculated by the Eclipse treatment planning system had exceeded the acceptable tolerance levels. When used as described in this study, HPlusQA can reduce the need for patient specific quality assurance measurements by 64%. The authors believe that the use of HPlusQA as a dose calculation second check can increase the efficiency and effectiveness of the QA process.

Mackin, Dennis; Li, Yupeng; Taylor, Michael B.; Kerr, Matthew; Holmes, Charles; Sahoo, Narayan; Poenisch, Falk; Li, Heng; Lii, Jim; Amos, Richard; Wu, Richard; Suzuki, Kazumichi; Gillin, Michael T.; Zhu, X. Ronald; Zhang, Xiaodong [Department of Radiation Physics, The University of Texas MD Anderson Cancer Center, Houston, Texas 77030 (United States)] [Department of Radiation Physics, The University of Texas MD Anderson Cancer Center, Houston, Texas 77030 (United States)

2013-12-15T23:59:59.000Z

7

Check valve  

DOE Patents [OSTI]

A check valve for use in a GDCS of a nuclear reactor and having a motor driven disk including a rotatable armature for rotating the check valve disk over its entire range of motion is described. In one embodiment, the check valve includes a valve body having a coolant flow channel extending therethrough. The coolant flow channel includes an inlet end and an outlet end. A valve body seat is located on an inner surface of the valve body. The check valve further includes a disk assembly, sometimes referred to as the motor driven disc, having a counterweight and a disk shaped valve. The disk valve includes a disk base having a seat for seating with the valve body seat. The disk assembly further includes a first hinge pin member which extends at least partially through the disk assembly and is engaged to the disk. The disk valve is rotatable relative to the first hinge pin member. The check valve also includes a motor having a stator frame with a stator bore therein. An armature is rotatably positioned within the stator bore and the armature is coupled to the disk valve to cause the disk valve to rotate about its full range of motion.

Upton, Hubert Allen (Morgan Hill, CA); Garcia, Pablo (Stanford, CA)

1999-08-24T23:59:59.000Z

8

Check valve  

DOE Patents [OSTI]

A check valve for use in a GDCS of a nuclear reactor and having a motor driven disk including a rotatable armature for rotating the check valve disk over its entire range of motion is described. In one embodiment, the check valve includes a valve body having a coolant flow channel extending therethrough. The coolant flow channel includes an inlet end and an outlet end. A valve body seat is located on an inner surface of the valve body. The check valve further includes a disk assembly, sometimes referred to as the motor driven disc, having a counterweight and a disk shaped valve. The disk valve includes a disk base having a seat for seating with the valve body seat. The disk assembly further includes a first hinge pin member which extends at least partially through the disk assembly and is engaged to the disk. The disk valve is rotatable relative to the first hinge pin member. The check valve also includes a motor having a stator frame with a stator bore therein. An armature is rotatably positioned within the stator bore and the armature is coupled to the disk valve to cause the disk valve to rotate about its full range of motion. 5 figs.

Upton, H.A.; Garcia, P.

1999-08-24T23:59:59.000Z

9

COS DCE BOOT FSW v1.13 Component Test Results Requirement 5.5.3.1 CRC Background Checking on Memory Regions  

E-Print Network [OSTI]

COS DCE BOOT FSW v1.13 Component Test Results Requirement 5.5.3.1 CRC Background Checking on Memory. Brownsberger 2-13-01 The Center for Astrophysics and Space Astronomy Reviewed: Approved: COS DCE BOOT FSW v1 & Space Astronomy Initial Release COS DCE BOOT FSW v1.13 Component Test Results Requirement 5.5.3.1 CRC

Colorado at Boulder, University of

10

COS DCE BOOT FSW v1.09 Component Test Results Requirement 5.5.3.1 CRC Background Checking on Memory Regions  

E-Print Network [OSTI]

COS DCE BOOT FSW v1.09 Component Test Results Requirement 5.5.3.1 CRC Background Checking on Memory. Brownsberger 2-13-01 The Center for Astrophysics and Space Astronomy Reviewed: Approved: COS DCE BOOT FSW v1 & Space Astronomy Initial Release COS DCE BOOT FSW v1.09 Component Test Results Requirement 5.5.3.1 CRC

Colorado at Boulder, University of

11

E-Print Network 3.0 - applying water quality Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Powered by Explorit Topic List Advanced Search Sample search results for: applying water quality Page: << < 1 2 3 4 5 > >> 1 Best Management Practices Water Quality Summary:...

12

2006 B100 Quality Survey Results: Milestone Report  

SciTech Connect (OSTI)

In 2006, the National Renewable Energy Laboratory conducted a nationwide quality survey of pure biodiesel (B100) intended to be used as a blendstock. The study collected random samples throughout the United States and analyzed them for quality against the current and proposed ASTM D6751 fuel quality specifications.

Alleman, T. L.; McCormick, R. L.; Deutch, S.

2007-05-01T23:59:59.000Z

13

Results of The Excreta Bioassay Quality Control Program For April 1, 2010 Through March 31, 2011  

SciTech Connect (OSTI)

A total of 76 urine samples and 10 spiked fecal samples were submitted during the report period (April 1, 2010 through March 31, 2011) to GEL Laboratories, LLC in South Carolina by the Hanford Internal Dosimetry Program (IDP) to check the accuracy, precision, and detection levels of their analyses. Urine analyses for 14C, Sr, for 238Pu, 239Pu, 241Am, 243Am, 235U, 238U, 238U-mass and fecal analyses for 241Am, 238Pu and 239Pu were tested this year. The number of QC urine samples submitted during the report period represented 1.1% of the total samples submitted. In addition to the samples provided by IDP, GEL was also required to conduct their own QC program, and submit the results of analyses to IDP. About 31% of the analyses processed by GEL during the first year of contract 112512 were quality control samples. GEL tested the performance of 23 radioisotopes, all of which met or exceeded the specifications in the Statement of Work within statistical uncertainty except the slightly elevated relative bias for 243,244Cm (Table 4).

Antonio, Cheryl L.

2012-07-19T23:59:59.000Z

14

Results of the Excreta Bioassay Quality Control Program For April 1, 2006 Through March 31, 2007  

SciTech Connect (OSTI)

A total of 66 urine samples, 6 blank fecal and 6 spiked artificial fecal samples were submitted during the report period (April 1, 2006 through March 31, 2007) to General Engineering Laboratories, South Carolina by the Hanford Internal Dosimetry Program (IDP) to check the accuracy, precision, and detection levels of their analyses. Urine analyses for tritium, Sr, 238Pu, 239Pu, 241Am, 243Am 235U, 238U, elemental uranium and fecal analyses for 241Am, 238Pu and 239Pu were tested this year. The number of QC urine samples submitted during the report period represented 1.7% of the total samples submitted. In addition to the samples provided by IDP, GEL was also required to conduct their own QC program, and submit the results of analyses to IDP. About 36% of the analyses processed by GEL during the second year of this contract were quality control samples. GEL tested the performance of 16 radioisotopes, all of which met or exceeded the specifications in the Statement of Work. IDP concluded that GEL was performing well for all analyses tested, and concerns identified earlier were satisfactorily resolved.

Antonio, Cheryl L.

2008-02-19T23:59:59.000Z

15

Results of the Excreta Bioassay Quality Control Program for April 1, 2009 through March 31, 2010  

SciTech Connect (OSTI)

A total of 58 urine samples and 10 fecal samples were submitted during the report period (April 1, 2009 through March 31, 2010) to General Engineering Laboratories, South Carolina by the Hanford Internal Dosimetry Program (IDP) to check the accuracy, precision, and detection levels of their analyses. Urine analyses for Sr, 238Pu, 239Pu, 241Am, 243Am 235U, 238U, elemental uranium and fecal analyses for 241Am, 238Pu and 239Pu were tested this year as well as four tissue samples for 238Pu, 239Pu, 241Am and 241Pu. The number of QC urine samples submitted during the report period represented 1.3% of the total samples submitted. In addition to the samples provided by IDP, GEL was also required to conduct their own QC program, and submit the results of analyses to IDP. About 33% of the analyses processed by GEL during the third year of this contract were quality control samples. GEL tested the performance of 21 radioisotopes, all of which met or exceeded the specifications in the Statement of Work within statistical uncertainty (Table 4).

Antonio, Cheryl L.

2012-07-19T23:59:59.000Z

16

E-Print Network 3.0 - asci software quality Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

by Explorit Topic List Advanced Search Sample search results for: asci software quality Page: << < 1 2 3 4 5 > >> 1 Internal Assessment Report 2004 Advanced School for Computing...

17

Records Schedule Contractor Checks  

Broader source: Energy.gov (indexed) [DOE]

The Treasliry's Financial Management Service (FMS) R11rea11 has cited that the forensic value of orizinal checks are ncedcd to pursue forgery cases in accordance with the...

18

Vendor Check-In Vendor Check-In Times  

E-Print Network [OSTI]

Vendor Check-In Vendor Check-In Times: 8:00am ­ 10:00am All vendors must check-in and have early. Participants may begin arriving as early as 10:00am. Vendor Parking is only available in the Vendor Parking Lot off of California Ave. Please refer to Vendor Parking Information. CHECK-IN PROCESS

Rose, Michael R.

19

Quality monitored distributed voting system  

DOE Patents [OSTI]

A quality monitoring system can detect certain system faults and fraud attempts in a distributed voting system. The system uses decoy voters to cast predetermined check ballots. Absent check ballots can indicate system faults. Altered check ballots can indicate attempts at counterfeiting votes. The system can also cast check ballots at predetermined times to provide another check on the distributed voting system. 6 figs.

Skogmo, D.

1997-03-18T23:59:59.000Z

20

STEP Intern Reference Check Sheet  

Broader source: Energy.gov [DOE]

STEP Intern Reference Check Sheet, from the Tool Kit Framework: Small Town University Energy Program (STEP).

Note: This page contains sample records for the topic "quality check results" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

E-Print Network 3.0 - ambient water quality Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Powered by Explorit Topic List Advanced Search Sample search results for: ambient water quality Page: << < 1 2 3 4 5 > >> 1 Episodic Toxicity in the San Francisco Bay System...

22

E-Print Network 3.0 - air quality control Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Powered by Explorit Topic List Advanced Search Sample search results for: air quality control Page: << < 1 2 3 4 5 > >> 1 AQAST Short-Term Project PI: Richard McNider, University...

23

COS DCE BOOT FSW v1.09 Component Test Results Requirement 5.5.1.4 Command to Disable/Enable CRC Checking on Upload  

E-Print Network [OSTI]

COS DCE BOOT FSW v1.09 Component Test Results Requirement 5.5.1.4 Command to Disable/Enable CRC. Brownsberger 2-13-01 The Center for Astrophysics and Space Astronomy Reviewed: Approved: COS DCE BOOT FSW v1 for Astrophysics & Space Astronomy Initial Release COS DCE BOOT FSW v1.09 Component Test Results Requirement 5

Colorado at Boulder, University of

24

COS DCE BOOT FSW v1.13 Component Test Results Requirement 5.5.1.4 Command to Disable/Enable CRC Checking on Upload  

E-Print Network [OSTI]

COS DCE BOOT FSW v1.13 Component Test Results Requirement 5.5.1.4 Command to Disable/Enable CRC. Brownsberger 2-13-01 The Center for Astrophysics and Space Astronomy Reviewed: Approved: COS DCE BOOT FSW v1 for Astrophysics & Space Astronomy Initial Release COS DCE BOOT FSW v1.13 Component Test Results Requirement 5

Colorado at Boulder, University of

25

WATER QUALITY CHANGES AS A RESULT OF COALBED METHANE DEVELOPMENT IN A ROCKY MOUNTAIN WATERSHED1  

E-Print Network [OSTI]

WATER QUALITY CHANGES AS A RESULT OF COALBED METHANE DEVELOPMENT IN A ROCKY MOUNTAIN WATERSHED1 Xixi Wang, Assefa M. Melesse, Michael E. McClain, and Wanhong Yang2 ABSTRACT: Coalbed methane (CBM the Powder River. (KEY TERMS: coalbed methane, produced water; Montana; natural gas; pattern analysis

McClain, Michael

26

E-Print Network 3.0 - air quality simulation Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: Commission on Environmental Quality, Saffett Tanrikulu Bay Area Air Quality Control District, Jon Pleim- EPA... for SIPs and air quality forecasting Problem to be...

27

E-Print Network 3.0 - air quality conformity Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: OKComponent Comments 200 Indoor Air Quality Forms Control sequence conforms to designspecifications? (describe changes... Indoor Air Quality...

28

Water quality changes as a result of coalbed methane development in a Rocky mountain watershed  

SciTech Connect (OSTI)

Coalbed methane (CBM) development raises serious environmental concerns. In response, concerted efforts have been made to collect chemistry, salinity, and sodicity data on CBM produced water. However, little information on changes of stream water quality resulting from directly and/or indirectly received CBM produced water is available in the literature. The objective of this study was to examine changes in stream water quality, particularly sodicity and salinity, due to CBM development in the Powder River watershed, which is located in the Rocky Mountain Region and traverses the states of Wyoming and Montana. To this end, a retrospective analysis of water quality trends and patterns was conducted using data collected from as early as 1946 up to and including 2002 at four U.S. Geological Survey gauging stations along the Powder River. Trend analysis was conducted using linear regression and Seasonal Kendall tests, whereas, Tukey's test for multiple comparisons was used to detect changes in the spatial pattern. The results indicated that the CBM development adversely affected the water quality in the Powder River. First, the development elevated the stream sodicity, as indicated by a significant increase trend of the sodium adsorption ratio. Second, the development tended to shrink the water quality differences among the three downstream stations but to widen the differences between these stations and the farthest upstream station. In contrast, the development had only a minor influence on stream salinity. Hence, the CBM development is likely an important factor that can be managed to lower the stream sodicity. The management may need to take into account that the effects of the CBMdevelopment were different from one location to another along the Powder River.

Wang, X.; Melesse, A.M.; McClain, M.E.; Yang, W. [Tarleton State University, Stephenville, TX (USA)

2007-12-15T23:59:59.000Z

29

Check Estimates and Independent Costs  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

Check estimates and independent cost estimates (ICEs) are tools that can be used to validate a cost estimate. Estimate validation entails an objective review of the estimate to ensure that estimate criteria and requirements have been met and well documented, defensible estimate has been developed. This chapter describes check estimates and their procedures and various types of independent cost estimates.

1997-03-28T23:59:59.000Z

30

E-Print Network 3.0 - acute dialysis quality Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Case Source: Laughlin, Robert B. - Department of Physics, Stanford University Collection: Physics 52 Quality Performance Measurement in California Summary: 12;Quality...

31

E-Print Network 3.0 - air quality information Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Management District (BAAQMD). For more detailed information, see Air Quality: Air Pollutants, SLAC Emissions... Air Quality: Reporting Requirements Department: Chemical and...

32

E-Print Network 3.0 - air quality strategy Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Commission on Environmental Quality, Saffett Tanrikulu Bay Area Air Quality Control District, Jon Pleim- EPA... for SIPs and air ... Source: Jacob, Daniel J. - School of...

33

E-Print Network 3.0 - air quality research Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Commission on Environmental Quality, Saffett Tanrikulu Bay Area Air Quality Control District, Jon Pleim- EPA... for SIPs ... Source: Jacob, Daniel J. - School of...

34

E-Print Network 3.0 - air quality criteria Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

is in the spotlight as a Summary: quality. Criteria pollutant -- One of six air pollutants that may adversely affect human health... Air Quality Standards (NAAQS) -- Air...

35

FINGERPRINTING AND CRIMINAL HISTORY RECORD CHECK ANIMAL CARE LAB  

E-Print Network [OSTI]

FD- 258) and submits the fingerprint card to the Federal Bureau of Investigation (FBI) for identification and a criminal history records check. The FBI will return the results of its records check risks, criminal record information will be obtained from the FBI under the guideline of this policy

Eirinaki, Magdalini

36

E-Print Network 3.0 - air quality scoping Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

this volume... a significant amount of high-quality research that addresses complex optimization and decision-making problems... of this volume is to collect the high quality work...

37

E-Print Network 3.0 - air quality mercury Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of the IJC asked one of its Boards, the International Air Quality... substances (PCBs, dioxins, PAHs) and mercury in some of the other Great Lakes11, 12 to support water quality......

38

E-Print Network 3.0 - air quality rule Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

State University, North Carolina Solar Center Collection: Renewable Energy ; Energy Storage, Conversion and Utilization 3 Air Quality: Reporting Requirements Department:...

39

Software Testing via Model Checking Fevzi Belli, Bari Gldali  

E-Print Network [OSTI]

Software Testing via Model Checking Fevzi Belli, Bari Güldali University of Paderborn, Dept-5251 603445/47; Fax: +49-5251 60 3246 Abstract. Testing is a necessary, but costly process for user-centric quality control. Moreover, testing is not comprehensive enough to completely detect faults. Many formal

Belli, Fevzi

40

Integrity Checking for Uncertain Data Hendrik Decker  

E-Print Network [OSTI]

, and to check them by making use of well-known methods for integrity checking. In the remainder of the paper, weIntegrity Checking for Uncertain Data Hendrik Decker Instituto Tecnol´ogico de Inform´atica E as semantic integrity constraints. Thus, imposing and checking such constraints provides a better control over

Martinenghi, Davide

Note: This page contains sample records for the topic "quality check results" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Behavioral Model Equivalence Checking for Large Analog Mixed Signal Systems  

E-Print Network [OSTI]

is solved by interfacing a sequential quadratic programming (SQP) based optimizer with commercial circuit simulation tools, such as CADENCE SPECTRE. The proposed methodology is then applied for equivalence checking of a PLL as a test case and results...

Singh, Amandeep

2012-07-16T23:59:59.000Z

42

DRIVER RECORD CHECK REQUEST FORM  

E-Print Network [OSTI]

DRIVER RECORD CHECK REQUEST FORM This form must be submitted to the Sport Clubs Office at least TWO weeks prior to your club's departure and serves as a request for permission to become an approved driver, please email us at sportclb@umn.edu or call 612-625-6017. Driver Information *Enter the following

Amin, S. Massoud

43

Pet Groomer? Check this out....  

E-Print Network [OSTI]

Want to be a Pet Groomer? Check this out.... Costs for Students Registering through UNH Continuing. For more information and an application, contact: Thompson School of Applied Science Pet Grooming Diploma Program in Pet Grooming University of New Hampshire Thompson School of Applied Science Applied Animal

New Hampshire, University of

44

REFERENCE AND BACKGROUND CHECK PROCESS  

E-Print Network [OSTI]

REFERENCE AND BACKGROUND CHECK PROCESS Workforce Planning | 408-924-2250 classcomp process. Workforce Planning will arrange this directly with the finalist(s) once the hiring manager has provided the finalist(s) name(s) to Workforce Planning. An exception to this process is for any candidates

Su, Xiao

45

E-Print Network 3.0 - air quality iaq Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

indoor air quality is a challenge for IAQ sensors used in HVAC systems. Data mining... to inferior performance, poor ... Source: Kusiak, Andrew - Department of Mechanical...

46

E-Print Network 3.0 - assessing soil quality Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

soil quality related to agricultural... of ... Source: Jawitz, James W. - Soil and Water Science Department, University of Florida Collection: Environmental Sciences and...

47

E-Print Network 3.0 - assess sediment quality Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ASSESSMENT OF CONTAMINATED FLUVIAL SEDIMENTS EROSION RISK AND ECOLOGICAL HAZARD Summary: bulk density profiles (-ray densiometer) vertical profiles of sediment quality...

48

E-Print Network 3.0 - awwa water quality Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Relevant Coursework: Principles of Environmental Chemistry Water and Wastewater Treatment... EPA quality control mandates Worked with Operations department to help achieve...

49

E-Print Network 3.0 - algebraic mesh quality Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Sciences 2 Presented by Adaptive Hybrid Mesh Refinement for Summary: . Mesh optimization algorithms to improve geometric quality measures such as angles, lengths, and...

50

E-Print Network 3.0 - ash quality recycling Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Utilization Summary: Center for By-Products Utilization RECENT ADVANCES IN RECYCLING CLEAN- COAL ASH By Tarun R. Naik... CANMET Conference on Quality of Concrete Structures and...

51

E-Print Network 3.0 - air quality metrics Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

(annually) 2. Particulate matter (PM10) a. Health hazard b. Visibility air quality 3. Dioxins... . Greenhouse gas b. Heating agent c. 40 million metric tons of carbon emissions...

52

E-Print Network 3.0 - air quality Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in voter... reasons to consider air quality when distributing these funds. Including air pollution as a screening... emissions." The State of California must therefore include...

53

E-Print Network 3.0 - air quality trends Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Engineering Current Research Projects Summary: , to quantify the effect of transboundary pollution on air quality. Ozone trends and interannual variability... Research's Community...

54

E-Print Network 3.0 - air quality planning Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in voter... reasons to consider air quality when distributing these funds. Including air pollution as a screening... emissions." The State of California must therefore include...

55

E-Print Network 3.0 - air quality benefits Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in voter... reasons to consider air quality when distributing these funds. Including air pollution as a screening... emissions." The State of California must therefore include...

56

E-Print Network 3.0 - air quality improvement Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: for the project in order to effectively improve air quality. Including air pollution as a screening criterion... ... the improvements will be undertaken in a...

57

E-Print Network 3.0 - air quality levels Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

A Breath of Fresh Air: Improving Air Summary: about unhealthful levels of air pollution. Impact Air quality forecasts and warnings for health... Learn More:...

58

E-Print Network 3.0 - air quality monitoring Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Trent University Environmental and Resource Studies Program Summary: Chemistry 2 Sep. 22 Air Pollution Overview The Atmosphere Air Quality Monitoring Networks 1 3 Sep. 29......

59

E-Print Network 3.0 - air quality quantified Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Engineering Current Research Projects Summary: , to quantify the effect of transboundary pollution on air quality. Ozone trends and interannual variability... Research's Community...

60

E-Print Network 3.0 - air quality analysis Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Trent University Environmental and Resource Studies Program Summary: Chemistry 2 Sep. 22 Air Pollution Overview The Atmosphere Air Quality Monitoring Networks 1 3 Sep. 29......

Note: This page contains sample records for the topic "quality check results" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

E-Print Network 3.0 - air quality related Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in voter... reasons to consider air quality when distributing these funds. Including air pollution as a screening... emissions." The State of California must therefore include...

62

E-Print Network 3.0 - air quality case Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Interaction Institute, Carnegie... quality with bare human perception as air pollutants are mostly invisible and odorless. We believe... that computing technologies can...

63

E-Print Network 3.0 - air quality index Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Interaction Institute, Carnegie... quality with bare human perception as air pollutants are mostly invisible and odorless. We believe... that computing technologies can...

64

Results of RCRA groundwater quality assessment program at the 216-U-12 crib  

SciTech Connect (OSTI)

The 216-U-12 crib has been in a Resource Conservation and Recovery Act of 1976 (RCRA) interim-status groundwater quality assessment program since the first quarter of 1993. Specific conductance measured in downgradient wells 299-W22-41 and 299-W22-42 exceeds its critical mean. This report presents the results and findings of Phases I and II of the assessment monitoring program, as required by 40 CFR 265.93. The elevated levels of specific conductance in the downgradient {open_quotes}triggering{close_quotes} wells are attributed to nitrate, the mobile anion released when nitric acid is diluted in water, and calcium which is released from the sediments as acid is neutralized. Technetium-99 levels have been elevated in these same downgradient wells since 1991. The source of these constituents is the 216-U-12 crib. Downward migration of nitrate and technetium-99 from the vadose zone (and continued elevated specific conductance in the two downgradient wells) is still occurring because the driving force is still present.

Williams, B.A.; Chou, C.J.

1997-05-01T23:59:59.000Z

65

E-Print Network 3.0 - air quality indicators Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

CO2 levels as a Partial Indicator of Air Quality in Smart Environments: A Data Mining... , we monitored Carbon Dioxide (CO2) levels as a ... Source: Collins, Gary S. -...

66

E-Print Network 3.0 - average quality factors Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

(PSNR in dB) versus error probability for the error modes... is shown. Fig. 6 depicts the image quality versus the ... Source: Chamzas, Christodoulos - Department of Electrical and...

67

E-Print Network 3.0 - air quality parameters Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

parameters. You will be asked to search on-line for information... Chemistry 2 Sep. 22 Air Pollution Overview The Atmosphere Air Quality Monitoring Networks 1 3 Sep. 29......

68

E-Print Network 3.0 - analyze oil quality Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

rock, and other units. The heating value is useful for determining the quality of an oil shale... , then adapted by the U.S. Bureau of Mines for analyzing oil shale of the Green...

69

ACCOUNTS PAYABLE CHECK REQUEST FORM Vendor Name  

E-Print Network [OSTI]

ACCOUNTS PAYABLE CHECK REQUEST FORM Vendor Name Remit to Address City State Zip Code SECTION 2 INSTRUCTIONS Use the link to view approved categories. Vendor Number (if known) DP Requester AP Entry Check

de Lijser, Peter

70

Model-Checking A Tutorial Introduction  

E-Print Network [OSTI]

Model-Checking A Tutorial Introduction Markus M¨uller-Olm1 , David Schmidt2 , and Bernhard Steffen1

Müller-Olm, Markus

71

Dynamic Testing of Check Valves William Rahmeyer  

E-Print Network [OSTI]

the web site http://www.engineering.usu.edu/Departments/cee/Faculty/rahm/check.html INTRODUCTION The twoDynamic Testing of Check Valves William Rahmeyer Professor of Civil and Environmental Engineering rahmeyer@fs.uwrl.usu.edu http://www.engineering.usu.edu/Departments/cee/Faculty/rahm/check.html #12

Rahmeyer, William J.

72

Local Model Checking Games (Extended Abstract)  

E-Print Network [OSTI]

University of Edinburgh Edinburgh EH9 3JZ, UK email: cps@uk.ac.ed.dcs 1 Introduction Model checking is a very to view this method as essentially algorithmic, and consequently a very fruitful relationship between that in the nite-state case these two approaches, model checking as essentially algorithmic and model checking

Stirling, Colin

73

Local Model Checking Games (Extended Abstract)  

E-Print Network [OSTI]

University of Edinburgh Edinburgh EH9 3JZ, UK email: cps@uk.ac.ed.dcs 1 Introduction Model checking is a very to view this method as essentially algorithmic, and consequently a very fruitful relationship between that in the finite­state case these two approaches, model checking as essentially algorithmic and model checking

Stirling, Colin

74

Payroll Check Direct Deposit Authorization  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home Design Passive Solar Home Design June 24,F.Payroll Check Direct

75

Fire Alarm Testing and Inspection Planning and Vendor Check In/Check Out Process  

E-Print Network [OSTI]

Fire Alarm Testing and Inspection Planning and Vendor Check In/Check Out Process DOCUMENT PURPOSE This process is used for fire alarm testing and inspection pre-work planning and vendor check in and check out. BUILDING NAME/#: ___________________/_____ VENDOR: ________________________ TECHNICIAN

Webb, Peter

76

IE 361 Module 14 Patterns on Control Charts and "Special Checks"/Extra Alarm Rules  

E-Print Network [OSTI]

3.4 of Statistical Quality Assurance Methods for Engineers Prof. Steve Vardeman and Prof. Max MorrisIE 361 Module 14 Patterns on Control Charts and "Special Checks"/Extra Alarm Rules Reading: Section equipment or a clear change in the quality of a raw material

Vardeman, Stephen B.

77

Static Consistency Checking for Distributed Specifications  

E-Print Network [OSTI]

Static Consistency Checking for Distributed Specifications Christian Nentwich, Wolfgang Emmerich, UK {c.nentwich,w.emmerich,a.finkelstein}@cs.ucl.ac.uk Abstract Software engineers building a complex

Finkelstein, Anthony

78

Fortuna: Model Checking Priced Probabilistic Timed Automata  

E-Print Network [OSTI]

Fortuna: Model Checking Priced Probabilistic Timed Automata Jasper Berendsen, David N. Jansen.O. Box 9010, 6500 GL Nijmegen, the Netherlands Abstract. We introduce Fortuna, the first tool for model checking priced probabilistic timed automata (PPTAs). Fortuna can handle the combination of real

Vaandrager, Frits

79

Model checking Timed CSP Philip Armstrong Gavin Lowe Joel Ouaknine  

E-Print Network [OSTI]

Model checking Timed CSP Philip Armstrong Gavin Lowe Jo¨el Ouaknine A.W. Roscoe Oxford University Department of Computer Science Abstract Though Timed CSP was developed 25 years ago and the CSP for Timed CSP. In this paper we report on the creation of such a version, based on the digitisation results

Ouaknine, Joël

80

Appendix A: Continuous Quality Improvement Matrix Student Learning Outcomes Relevant Experiences Measures Use of Results  

E-Print Network [OSTI]

in considering equity vs. efficiency tradeoffs within real world situations. Average = 4.64/6 Individual faculty on this measure. It is possible that new elective courses may be neccesary at some point in the future to improve performance on this goal. #12;Student Learning Outcomes Relevant Experiences Measures Use of Results equity vs

Gering, Jon C.

Note: This page contains sample records for the topic "quality check results" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Tools for Viewing and Quality Checking ARM Data  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism in Layered NbS2 andThe1A:decisional. 1 BEnergy Tools for

82

Completeness and Complexity of Bounded Model Checking #  

E-Print Network [OSTI]

of an exponent between this procedure and standard LTL model checking. We discuss ways to bridge this gap by the Semiconductor Research Corporation (SRC) under contract no. 99­TJ­684, the National Science Foundation (NSF

Ouaknine, Joël

83

Completeness and Complexity of Bounded Model Checking  

E-Print Network [OSTI]

of an exponent between this procedure and standard LTL model checking. We discuss ways to bridge this gap reaches some pre-computed threshold, which indicates that This research is supported by the Semiconductor

Ouaknine, Joël

84

Computational fact checking from knowledge networks  

E-Print Network [OSTI]

Traditional fact checking by expert journalists cannot keep up with the enormous volume of information that is now generated online. Computational fact checking may significantly enhance our ability to evaluate the veracity of dubious information. Here we show that the complexities of human fact checking can be approximated quite well by finding the shortest path between concept nodes under properly defined semantic proximity metrics on knowledge graphs. Framed as a network problem this approach is feasible with efficient computational techniques. We evaluate this approach by examining tens of thousands of claims related to history, entertainment, geography, and biographical information using a public knowledge graph extracted from Wikipedia. Statements independently known to be true consistently receive higher support via our method than do false ones. These findings represent a significant step toward scalable computational fact-checking methods that may one day mitigate the spread of harmful misinformation...

Ciampaglia, Giovanni Luca; Rocha, Luis M; Bollen, Johan; Menczer, Filippo; Flammini, Alessandro

2015-01-01T23:59:59.000Z

85

Asserting and Checking Determinism for Multithreaded Programs  

E-Print Network [OSTI]

Asserting and Checking Determinism for Multithreaded Programs Jacob Burnim EECS Department, UC provided that copies are not made or distributed for profit or commercial advantage and that copies bear

Sen, Koushik

86

Monitoring indoor air quality in French schools and day-care centres. Results from the first phase of a pilot survey.  

E-Print Network [OSTI]

. KEYWORDS Air pollution, air stuffiness, formaldehyde, benzene. 1 INTRODUCTION Indoor air quality to determine an air stuffiness index as an indirect mean to assess pollutants accumulation in a closed spaceMonitoring indoor air quality in French schools and day-care centres. Results from the first phase

Boyer, Edmond

87

Safe Compositional Specification of Networking Systems # TRAFFIC The Language and Its Type Checking  

E-Print Network [OSTI]

], and presents a type system based on desired safety assurance. We provide proofs on reduction (weak of a syntax­directed type checking algorithm implementing rules of the type system capable of inferring by the need to devise a formalism to describe Quality of Service (QoS) properties of flows and rigorously

88

Safe Compositional Specification of Networking Systems TRAFFIC The Language and Its Type Checking  

E-Print Network [OSTI]

], and presents a type system based on desired safety assurance. We provide proofs on reduction (weak of a syntax-directed type checking algorithm implementing rules of the type system capable of inferring by the need to devise a formalism to describe Quality of Service (QoS) properties of flows and rigorously

89

Bicycle Check Out/Check In Top section to be completed by Welcome Desk Staff Only  

E-Print Network [OSTI]

Bicycle Check Out/Check In Top section to be completed by Welcome Desk Staff Only Name-mail: _________________________________________ Bicycle #:__________ Helmet #:________ Pannier #:________ Date and Time Out: ______________________ (bicycle must be returned by the end of Recreation Center daily operating hours) Date and Time In

Massachusetts at Lowell, University of

90

Check Out - Combustion Energy Frontier Research Center  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed New Substation SitesStandingtheirCheck In & Registration Check In &FAQ »

91

Efficient Model Checking of PSL Safety Properties Tuomas Launiainen  

E-Print Network [OSTI]

to be checked are safety properties. This work presents an efficient approach to model check safety properties properties. In this work we present an approach for model checking of safety properties expressed in PSLEfficient Model Checking of PSL Safety Properties Tuomas Launiainen Department of Information

Heljanko, Keijo

92

Keep new concepts Check cognition level  

E-Print Network [OSTI]

point "cold" topic "hot" topicTop HealthScience Nuclear Energy Safety& Accidents Concepts at time point· Keep new concepts · Check cognition level = number of news {Japan, nuclear, disaster · Multilingual Wikipedia history analysis Japan footballteam national nuclear disaster Set of candidates per time

Chaudhuri, Surajit

93

ModelChecking A Tutorial Introduction  

E-Print Network [OSTI]

Model­Checking A Tutorial Introduction Markus M¨uller­Olm 1 , David Schmidt 2 , and Bernhard to provide a practitioner with a basis she #12; 2 Markus M¨uller­Olm, David Schmidt, and Bernhard Steffen x=0

Schmidt, David A.

94

Fortuna: Model Checking Priced Probabilistic Timed Automata  

E-Print Network [OSTI]

Fortuna: Model Checking Priced Probabilistic Timed Automata Jasper Berendsen, David N. Jansen, the Netherlands Email: jasperb,dnjansen,fvaan @cs.ru.nl Abstract--We introduce FORTUNA, the first tool for model of probabilistic timed automata (PTAs) with cost-rates and discrete cost increments on states. FORTUNA is able

Vaandrager, Frits

95

Software-Based Concurrent Control Flow Checking  

E-Print Network [OSTI]

overhead and moderate program size overhead. It was evaluated on di erent architectures. Error coverage the program code. At run-time, a simple watchdog processor monitors the address and data lines. Using and design of the preprocessor. Our checking algorithm is presented in section 4. An example of a modi ed

Fey, Dietmar

96

CRADA CHECKLIST For Your Convenience, check off  

E-Print Network [OSTI]

CRADA CHECKLIST For Your Convenience, check off: CRADA Clearance form fill in everything (except CRADA #); put "N/A" or "0" when box is not applicable make sure that the person-year box totals match, disease states, etc. must be listed if they are to be considered part of the CRADA research (you cannot

Baker, Chris I.

97

Pre-resistance-welding resistance check  

DOE Patents [OSTI]

A preweld resistance check for resistance welding machines uses an open circuited measurement to determine the welding machine resistance, a closed circuit measurement to determine the parallel resistance of a workpiece set and the machine, and a calculation to determine the resistance of the workpiece set. Any variation in workpiece set or machine resistance is an indication that the weld may be different from a control weld.

Destefan, Dennis E. (Broomfield, CO); Stompro, David A. (Idaho Falls, ID)

1991-01-01T23:59:59.000Z

98

The University's approach to quality management The University of Bath has a reputation for excellence as a result of sustained success in learning  

E-Print Network [OSTI]

representatives, the outcomes of the University's routine quality management processes, and good practice for excellence as a result of sustained success in learning and teaching and research over a number of years to make the case for a particular approach to learning and teaching, or it can be about drawing upon

Burton, Geoffrey R.

99

Hydrogen Fuel Quality - Focus: Analytical Methods Development...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Fuel Quality - Focus: Analytical Methods Development & Hydrogen Fuel Quality Results Hydrogen Fuel Quality - Focus: Analytical Methods Development & Hydrogen Fuel Quality Results...

100

A VSLI design rule check program generator  

E-Print Network [OSTI]

A VLSI DESIGN RULE CHECK PROGRAM GENERATOR A Thesis bi ANN ELIZABETH GELBER HARWOOD Submitted to the Graduate College of Texas A8cM University in partial fulhllment of the requirement for the degree of MASTER OF SCIENCE December 1985 Major... TO VLSI DESIGN AT TEXAS A8cM UNIVERSITY" 64 70 TABLE OF CONTENTS (Continued) Page APPENDIX C APPENDIX D APPENDIX E VITA LYRA RULESET FOR T. I. DESIGN RULES AMRULES RULESET FOR MAKEDRC PROGRAM LISTINGS 82 86 , 121 LIST OF TABLES Table I...

Harwood, Ann Elizabeth Gelber

1985-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "quality check results" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Check Heat Transfer Surfaces | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana. DOCUMENTS AVAILABLE FORSuperior Energy5-1 Chapter 5 Loswhen to check andthe

102

Reducing pressure loss of large diameter check valves  

SciTech Connect (OSTI)

Transcend Inc., a consulting firm that specializes in the use of computer simulation to optimize existing equipment and system designs, was approached by Mannesmann Demag AG, Moenchengladbach, Germany to optimize the design of its DRV-B check valve. In one of the first applications of Computational Fluid Dynamics (CFD) technology to valve design, the pressure loss coefficient (K) of the DRV-B valve was lowered to 0.40--0.50 for valve sizes NPS48--NPS12, the lowest possible level for this type of valve. The flow efficiency is three times better than that of the earlier design. As a result, the optimized Mannesmann Demag DRV-B check valve provides a dramatic reduction in operating cost, particularly in transmission service where natural gas is transported over long distances. The reduced pressure loss saves compressor fuel cost. For the optimized valve, the incremental compressor fuel cost is reduced to 1.5-times the capital cost of the valve calculated over a 20-year Life Cycle Cost (LCC) period.

NONE

1997-09-01T23:59:59.000Z

103

Smog Check II Evaluation California Inspection and  

E-Print Network [OSTI]

National Ambient Air Quality Standards NO Nitrogen Oxide NO2 Nitrogen Dioxide NOx Nitrogen Oxides RAP Assistance Program CHP California Highway Patrol CO Carbon Monoxide CO2 Carbon Dioxide DMV California

Denver, University of

104

Static and Dynamic Quality Assurance by Aspect Oriented Techniques  

E-Print Network [OSTI]

The overall goal of the described research project was to create applicable quality assurance patterns for Java software systems using the aspect-oriented programming language extension AspectJ 5. We tried to develop aspects to check static quality criteria as a variable mutator convention and architectural layering rules. We successfully developed aspects for automating the following dynamic quality criteria: Parameterized Exception Chaining, Comfortable Declaration of Parameterized Exceptions, Not-Null Checking of Reference Variables.

Knabe, Christoph

2010-01-01T23:59:59.000Z

105

Course Materials • ALWAYS check the MA 15300 website FIRST ...  

E-Print Network [OSTI]

policies and understand all the course materials on the website. • ALWAYS check the MA 15300 · website FIRST when searching for class information.

Devlin, Patrick M

2015-01-03T23:59:59.000Z

106

1058 IEEE TRANSACTIONS ON INFORMATION THEORY, VOL. 53, NO. 3, MARCH 2007 Generalized Low-Density Parity-Check Codes  

E-Print Network [OSTI]

represented by an extrinsic mutual information transfer (EXIT) chart. Simulation results show-Hadamard codes. Index Terms--Code optimization, extrinsic mutual informa- tion transfer (EXIT) chart, generalized check (SPC) codes using bipartite graphs. For

Ping, Li

107

Can We Predict Plan Quality for External Beam Partial Breast Irradiation: Results of a Multicenter Feasibility Study (Trans Tasman Radiation Oncology Group Study 06.02)  

SciTech Connect (OSTI)

Purpose: Partial breast irradiation (PBI) after lumpectomy may be an option for selected patients with early breast cancer. A feasibility study of accelerated PBI delivered using external beam 3-dimensional conformal radiation therapy (RT) was undertaken at 8 Australasian centers. The present study evaluated the impact of patient, tumor, and RT technique-related factors on the quality of RT plans as determined by the dose–volume parameters of organs at risk. Methods and Materials: Forty-eight patients were enrolled in the study. All RT plans were centrally reviewed using predefined dosimetric criteria before commencement and after completion of protocol therapy. The RT plans of 47 patients met the dose–volume constraints, and all 47 patients received PBI to a prescribed dose of 38.5 Gy in 10 fractions. The RT plan quality was determined by volumes of the ipsilateral whole breast, lung, and heart that received 50% and 95%; 30%; and 5% of the prescribed dose, respectively. Patient, tumor, and RT technique-related factors were investigated for association with the parameters of RT plan quality. Results: The ratio of the planning target volume to the ipsilateral whole-breast volume was significantly associated with the ipsilateral breast doses on multiple variable analyses. The distance of the postlumpectomy surgical cavity from the heart and lung were predictive for heart and lung doses, respectively. A distance between surgical cavity and heart of >4 cm typically resulted in <1% of the heart volume receiving 5 Gy or less. It was more difficult to meet the heart dose constraint for left-sided and medially located tumors. Conclusions: Partial breast irradiation using 3-dimensional conformal RT was feasible within the study constraints. The ratio of planning target volume to ipsilateral whole-breast volume and the distance of surgical cavity from the heart were significant predictors of the quality of treatment plan for external beam PBI.

Kron, Tomas, E-mail: Tomas.Kron@petermac.org [Peter MacCallum Cancer Centre, Departments of Radiation Oncology, Physical Sciences and Radiation Therapy, Melbourne, Victoria (Australia); Sir Peter MacCallum Department of Oncology, University of Melbourne, Melbourne, Victoria (Australia); School of Science, Engineering and Technology, Royal Melbourne Institute of Technology University, Melbourne, Victoria (Australia); Willis, David; Link, Emma [Peter MacCallum Cancer Centre, Departments of Radiation Oncology, Physical Sciences and Radiation Therapy, Melbourne, Victoria (Australia); Lehman, Margot [Princess Alexandra Hospital, Department of Radiation Oncology, Brisbane, Queensland (Australia); Campbell, Gillian [Auckland City Hospital, Department of Radiation Oncology, Auckland (New Zealand); O'Brien, Peter [Newcastle Calvary Mater Hospital, Department of Radiation Oncology, Newcastle, NSW (Australia); Chua, Boon [Peter MacCallum Cancer Centre, Departments of Radiation Oncology, Physical Sciences and Radiation Therapy, Melbourne, Victoria (Australia); Sir Peter MacCallum Department of Oncology, University of Melbourne, Melbourne, Victoria (Australia)

2013-11-15T23:59:59.000Z

108

Impact of ANSI X9.24-1:2009 Key Check Value on ISO/IEC 9797-1:2011 MACs  

E-Print Network [OSTI]

Impact of ANSI X9.24-1:2009 Key Check Value on ISO/IEC 9797-1:2011 MACs Tetsu Iwata1 and Lei Wang2, wang.lei@ntu.edu.sg Abstract. ANSI X9.24-1:2009 specifies the key check value, which is used to verify check value. As a result, we obtain a complete characterization of the impact of using ANSI X9.24-1 key

109

Termination and Reduction Checking for HigherOrder Logic Programs  

E-Print Network [OSTI]

Termination and Reduction Checking for Higher­Order Logic Programs Brigitte Pientka Department, we present a syntax­directed termination and reduction checker for higher­order logic programs and output of well­moded predicates. These reduction con­ straints are exploited during termination checking

Pientka, Brigitte

110

Termination and Reduction Checking for Higher-Order Logic Programs  

E-Print Network [OSTI]

Termination and Reduction Checking for Higher-Order Logic Programs Brigitte Pientka Department, we present a syntax-directed termination and reduction checker for higher-order logic programs and output of well-moded predicates. These reduction con- straints are exploited during termination checking

Pientka, Brigitte

111

Instruction Guide Paying Vendors: Checking Vouchers for Errors  

E-Print Network [OSTI]

Instruction Guide Paying Vendors: Checking Vouchers for Errors and Match Exceptions Updated the Pay Terms on the voucher · Changing the Vendor or Vendor address · Vouchering a PO that have receipts link or the Error Summary tab. #12;Instruction Guide Paying Vendors: Checking Vouchers for Errors

Watson, Craig A.

112

Designing programs that check their work \\Lambda Manuel Blum  

E-Print Network [OSTI]

Designing programs that check their work \\Lambda Manuel Blum Comp. Sci. Division U. of California Classification D.2.4 F.2.0 F.3.1 G.3 Abstract A program correctness checker is an algorithm for checking the output of a computation. That is, given a program and an instance on which the program is run

Plotkin, Joshua B.

113

Formal Proof of Abstract Model Checking of Concurrent Garbage Collection  

E-Print Network [OSTI]

, the correctness of abstraction is not always easy to verify. In our pre- vious work, we applied abstract model with that of proving the concrete system from scratch (not by abstract model checking). In our previous work [6], whichFormal Proof of Abstract Model Checking of Concurrent Garbage Collection Koichi Takahashi Masami

Hagiya, Masami

114

Verification of Parallel Garbage Collection by Abstract Model Checking  

E-Print Network [OSTI]

have a finite state space provided that the abstraction mapping is powerful. M¨uller and Nipkow's work working on abstract model checking. In Section 4, the abstractions we defined on garbage #12; collectionVerification of Parallel Garbage Collection by Abstract Model Checking (Extended Abstract) Masami

Hagiya, Masami

115

Assumption-Commitment Support for CSP Model Checking  

E-Print Network [OSTI]

AVoCS 2006 Assumption-Commitment Support for CSP Model Checking Nick Moffat1 Systems Assurance using CSP. In our formulation, an assumption-commitment style property of a process SYS takes the form-Guarantee, CSP, Model Checking, Compositional Reasoning 1 Introduction The principle of compositional program

Paris-Sud XI, Université de

116

Master of Architecture Check Sheet Professional M.Arch. II & III  

E-Print Network [OSTI]

Master of Architecture Check Sheet Professional M.Arch. II & III Apply on-line at: https in architecture (not to exceed 500 words). _____ One unofficial copy of the transcript where the undergraduate results. KU's Institution Code is 6871 and the Department Code for Architecture is 4401. International

117

Please complete the following information, check the meeting date you plan to attend, and return, along with $15 registration fee (checks or money order only), via mail  

E-Print Network [OSTI]

, along with $15 registration fee (checks or money order only), via mail to: Brittany Dittemore Headwaters

Guiltinan, Mark

118

When Model Checking Met Deduction Computer Science Laboratory  

E-Print Network [OSTI]

Park, CA Sep 19, 2014 #12;Alan Turing It is of course important that some efforts be made to verify hold in each case. Alan Turing (quoted by D. MacKenzie in Risk and Reason) N. Shankar Model checking

Clarke, Edmund M.

119

Flexible Consistency Checking Christian Nentwich, Wolfgang Emmerich, Anthony Finkelstein  

E-Print Network [OSTI]

Flexible Consistency Checking Christian Nentwich, Wolfgang Emmerich, Anthony Finkelstein Department of Computer Science University College London Gower Street, London, WC1E 6BT UK {c.nentwich,w.emmerich

Finkelstein, Anthony

120

Checking Herbrand Equalities and Beyond Markus Muller-Olm1  

E-Print Network [OSTI]

Checking Herbrand Equalities and Beyond Markus M¨uller-Olm1 , Oliver R¨uthing1 , and Helmut Seidl2 M¨uller-Olm, Oliver R¨uthing, and Helmut Seidl This deficiency is still present in the algorithm

Müller-Olm, Markus

Note: This page contains sample records for the topic "quality check results" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Smog Check II Evaluation Part II: Overview of Vehicle  

E-Print Network [OSTI]

Smog Check II Evaluation Part II: Overview of Vehicle Emissions . . . . . . . . . . . . Prepared in Later Sections ____________________ 1 3. Older Vehicles Have Higher Emissions on Average _____________ 3 4. The Vehicle Fleet Is Dominated by Newer Vehicles______________ 8 5. More Recent Vehicle Models

Denver, University of

122

Specifying and Checking Semantic Atomicity for Multithreaded Programs  

E-Print Network [OSTI]

Specifying and Checking Semantic Atomicity for Multithreaded Programs Jacob Burnim George Necula or commercial advantage and that copies bear this notice and the full citation on the first page. To copy

Necula, George

123

WLDF 311 Treefrog Study; Fall 2007 Pipe Checking Protocol  

E-Print Network [OSTI]

WLDF 311 Treefrog Study; Fall 2007 Pipe Checking Protocol: 1. Arrange time to meet/travel to study that each pipe is checked. If there is a frog(s), then: a. Take the trap off the stake without letting frogs). If the frogs don't come out, put some more water in the pipe, swirl and "swoosh" them out. b. Pick up each frog

Johnson, Matthew

124

Results of Phase I groundwater quality assessment for single-shell tank waste management areas T and TX-TY at the Hanford Site  

SciTech Connect (OSTI)

Pacific Northwest National Laboratory (PNNL) conducted a Phase I, Resource Conservation and Recovery Act of 1976 (RCRA) groundwater quality assessment for the Richland Field Office of the U.S. Department of Energy (DOE-RL) under the requirements of the Federal Facility Compliance Agreement. The purpose of the investigation was to determine if the Single-Shell Tank Waste Management Areas (WMAs) T and TX-TY have impacted groundwater quality. Waste Management Areas T and TX-TY, located in the northern part of the 200 West Area of the Hanford Site, contain the 241-T, 241-TX, and 241-TY tank farms and ancillary waste systems. These two units are regulated under RCRA interim-status regulations (under 40 CFR 265.93) and were placed in assessment groundwater monitoring because of elevated specific conductance in downgradient wells. Anomalous concentrations of technetium-99, chromium, nitrate, iodine-129, and cobalt-60 also were observed in some downgradient wells. Phase I assessment, allowed under 40 CFR 265, provides the owner-operator of a facility with the opportunity to show that the observed contamination has a source other than the regulated unit. For this Phase I assessment, PNNL evaluated available information on groundwater chemistry and past waste management practices in the vicinity of WMAs T and TX-TY. Background contaminant concentrations in the vicinity of WMAs T and TX-TY are the result of several overlapping contaminant plumes resulting from past-practice waste disposal operations. This background has been used as baseline for determining potential WMA impacts on groundwater.

Hodges, F.N.

1998-01-01T23:59:59.000Z

125

Vector network analyzer check standards measurements and database software  

SciTech Connect (OSTI)

Vector network analyzers provide a convenient way to measure scattering parameters of a variety of microwave devices. However, these instruments, unlike oscilloscopes, require a high degree of user knowledge and expertise. Measurement calibration or error correction must be done prior to use. There are many ways to make poor measurement or measurement. Check standards have been used to verify that the network analyzer is operating properly. A computer program was developed to automatically measure a check standard and compare the new measurements with an historical database of measurements of the check standard device. The program can acquire new measurement data from selected check standards, plot the new data against the mean and standard deviation of prior data for the check standard, and update the database files for the check standard. This paper describes the function of the software including a discussion of its capabilities. The way in which the software is used in our lab is also described. Finally, examples are given of how the software can detect potential measurement problems.

Duda, L.E.

1996-05-01T23:59:59.000Z

126

Assuring the Quality of Test Results in the Field of Nuclear Techniques and Ionizing Radiation. The Practical Implementation of Section 5.9 of the EN ISO/IEC 17025 Standard  

SciTech Connect (OSTI)

The paper aims to present a practical approach for testing laboratories to ensure the quality of their test results. It is based on the experience gained in assessing a large number of testing laboratories, discussing with management and staff, reviewing results obtained in national and international PTs and ILCs and exchanging information in the EA laboratory committee.According to EN ISO/IEC 17025, an accredited laboratory has to implement a programme to ensure the quality of its test results for each measurand. Pre-analytical, analytical and post-analytical measures shall be applied in a systematic manner. They shall include both quality control and quality assurance measures.When designing the quality assurance programme a laboratory should consider pre-analytical activities (like personnel training, selection and validation of test methods, qualifying equipment), analytical activities ranging from sampling, sample preparation, instrumental analysis and post-analytical activities (like decoding, calculation, use of statistical tests or packages, management of results).Designed on different levels (analyst, quality manager and technical manager), including a variety of measures, the programme shall ensure the validity and accuracy of test results, the adequacy of the management system, prove the laboratory's competence in performing tests under accreditation and last but not least show the comparability of test results.Laboratory management should establish performance targets and review periodically QC/QA results against them, implementing appropriate measures in case of non-compliance.

Cucu, Daniela [Romanian Accreditation Body, RENAR, Bucharest (Romania); Woods, Mike [Ionising Radiation Metrology Consultants Ltd, Teddington, Middlesex TW 11 9PQ (United Kingdom)

2008-08-14T23:59:59.000Z

127

Results of phase 1 groundwater quality assessment for Single-Shell Tank Waste Management Areas B-BX-BY at the Hanford Site  

SciTech Connect (OSTI)

Pacific Northwest National Laboratory conducted a Phase 1 (or first determination) groundwater quality assessment for the US Department of Energy, Richland Operations Office, in accordance with the Federal Facility Compliance Agreement. The purpose of the assessment was to determine if the Single-Shell Tank Waste Management Area (WMA) B-BX-BY has impacted groundwater quality. This report will document the evidence demonstrating that the WMA has impacted groundwater quality.

Narbutovskih, S.M.

1998-02-01T23:59:59.000Z

128

Search results | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Search results Enter terms Search Showing 1 - 1 of 1 result. Download Fun with the Sun- Teacher's Activity Guide for Elementary Grades K-2 Check out these energy activities...

129

Water Quality  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Water Quality Water Quality We protect water quality through stormwater control measures and an extensive network of monitoring wells and stations encompassing groundwater, surface...

130

Optimizing Symbolic Model Checking for Statecharts  

E-Print Network [OSTI]

on commercial aircraft. The techniques together reduce the time and space requirements by orders of magnitude of the TCAS II and the EPD analyses. Experi- mental results show orders-of-magnitude reduction in the time of the BDDs generated. We identify certain styles for synchronization in state- charts that are more efficient

Beame, Paul

131

Instructions to obtain the FBI background check Long-Stay Valencia Students The FBI Background Check is the first step in a two-part process. The FBI Background Check takes 4-6  

E-Print Network [OSTI]

Instructions to obtain the FBI background check Long-Stay Valencia Students The FBI Background Check is the first step in a two-part process. The FBI Background Check takes 4-6 weeks for processing form, fingerprint card and payment--to the following address: FBI CJIS Division ­ Record Request 1000

Hull, Elaine

132

Check In & Registration - Combustion Energy Frontier Research Center  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed New Substation SitesStandingtheirCheck In & Registration Check In &

133

DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

o Order of 10 August 1984 relating to the quality of design, construction, operation and decommissioning of nuclear installations (so called quality order); o Order of 26 November...

134

Check for peroxides every 6 months. opened test 1 test 2 test 3  

E-Print Network [OSTI]

Check for peroxides every 6 months. opened test 1 test 2 test 3 date initials Check for peroxides every 6 months. opened test 1 test 2 test 3 date initials Check for peroxides every 6 months. Test strips can be obtained from EH&S, 5-8200 opened test 1 test 2 test 3 date initials Check for peroxides

Pawlowski, Wojtek

135

Check for chirality in {sup 102}Rh  

SciTech Connect (OSTI)

Excited states in {sup 102}Rh, populated by the fusion-evaporation reaction {sup 94}Zr({sup 11}B,3n){sup 102}Rh at a beam energy of 36 MeV, were studied using the INGA spectrometer at IUAC, New Delhi. The angular correlations and the electromagnetic character of some of the gamma-ray transitions observed were investigated in details. A new chiral candidate sister band was found in the level-scheme of {sup 102}Rh. Lifetimes of exited states in {sup 102}Rh were measured by means of the Doppler-shift attenuation technique. The experimental results do not support the presence of static chirality in {sup 102}Rh.

Tonev, D.; Goutev, N.; Yavahchova, M. S.; Petkov, P.; Angelis, G. de; Bhowmik, R. K.; Singh, R. P.; Muralithar, S.; Madhavan, N.; Kumar, R.; Raju, M. Kumar; Kaur, J.; Mahanto, G.; Singh, A.; Kaur, N.; Garg, R.; Sukla, A.; Marinov, Ts. K.; Brant, S. [Bulgarian Academy of Sciences, Institute for Nuclear Research and Nuclear Energy, Sofia (Bulgaria) and INFN, Laboratori Nazionali di Legnaro, Legnaro (Italy); Inter-University Accelerator Center, New Delhi (India); Nuclear Physics Department, Andhra University, Visakhapatnam (India); Department of Physics, Punjab University, Chandigarh (India); Inter-University Accelerator Center, New Delhi (India); Department of Physics, Punjab University, Chandigarh (India); Department of Physics and Astrophysics, Delhi University, New Delhi (India); Department of Physics, Banaras Hindu University, Varanasi (India); Bulgarian Academy of Sciences, Institute for Nuclear Research and Nuclear Energy, Sofia (Bulgaria); Department of Physics, Faculty of Science, Zagreb University, Zagreb (Croatia)

2012-10-20T23:59:59.000Z

136

Termination Checking: Comparing Structural Recursion and Sized Types by Examples  

E-Print Network [OSTI]

Termination Checking: Comparing Structural Recursion and Sized Types by Examples David Thibodeau Decemer 3, 2011 Abstract Termination is an important property for programs and is necessary for formal proofs to make sense. In order to make sure that a program using recursion is terminating, one can use

Abel, Andreas

137

Detecting Termination of Active Database Rules Using Symbolic Model Checking  

E-Print Network [OSTI]

Detecting Termination of Active Database Rules Using Symbolic Model Checking Indrakshi Ray is the non-termination of rules. Although algorithms have been proposed to detect non-termination, al- most all provide a conservative estimate; that is, the algorithms detect all the potential cases of non-termination

Ray, Indrakshi

138

Eoeective Recognizability and Model Checking of Reactive Fioeo Automata  

E-Print Network [OSTI]

Electre. For this, we deøne a particular behavioral model for Electre programs, Reactive Fioeo Au­ tomata speciøed with the reactive language Electre [CR95]. A reactive pro­ gram is supposed to reactEoeective Recognizability and Model Checking of Reactive Fioeo Automata G. Sutre 1 , A. Finkel 1

Sutre, Grégoire

139

National propane safety week caps fifth anniversary of GAS Check  

SciTech Connect (OSTI)

This paper reports on National Propane Safety Week. The publicity encompassed everything from preventative maintenance to safe winter storage of cylinders. This campaign focused much of its attention on GAS (gas appliance system) Check, the propane industry's most well-known safety program.

Prowler, S.

1990-09-01T23:59:59.000Z

140

Equivalence Checking for Function Pipelining in Behavioral Synthesis  

E-Print Network [OSTI]

on subtle design invariants. Function pipelining (a.k.a. system-level pipelining) is an important, correct-by-construction abstraction of function pipeline; thus, instead of developing pipelineEquivalence Checking for Function Pipelining in Behavioral Synthesis Kecheng Hao, Sandip Ray

Xie, Fei

Note: This page contains sample records for the topic "quality check results" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Check BMail account University sends all official communications  

E-Print Network [OSTI]

Binghamton email account (BMail) at bmail.binghamton.edu. Check financial aid application status online · Log) · An insurance company, scholarship program, loan company or other third party may require student and/or family will be reflected. · To access NSC, log into BU BRAIN,"Records" tab. · For complete details and how-to steps go

Suzuki, Masatsugu

142

Web Service Composition: a Reality Check Jianguo Lu, 2  

E-Print Network [OSTI]

- 1 - Web Service Composition: a Reality Check 1 Jianguo Lu, 2 Yijun Yu, 1 Debashis Roy, 1 Deepa Department, The Open University y.yu@open.ac.uk Abstract Automated web service composition is one dynamically and automatically. To investigate the methods for composite web service construction, we conducted

Lu, Jianguo

143

Checking Session-Oriented Interactions between Web Services  

E-Print Network [OSTI]

Checking Session-Oriented Interactions between Web Services Pavel Parizek1 , Jiri Adamek1,2 1 of Sciences of the Czech Republic, Institute of Computer Science Abstract Although web services are generally envisioned as being stateless, some of them are implicitly stateful. The reason is that the web services

144

Applying High Performance Computing to Analyzing by Probabilistic Model Checking  

E-Print Network [OSTI]

Applying High Performance Computing to Analyzing by Probabilistic Model Checking Mobile Cellular on the use of high performance computing in order to analyze with the proba- bilistic model checker PRISM. The Figure Generation Script 22 2 #12;1. Introduction We report in this paper on the use of high performance

Schneider, Carsten

145

Revising Specifications with CTL Properties using Bounded Model Checking  

E-Print Network [OSTI]

Revising Specifications with CTL Properties using Bounded Model Checking No Author Given that inconsistencies arise between the formal specification and some desired property. Belief Revision deals. In this paper, we propose the use of belief revision techniques in order to deal with inconsistencies in formal

Finger, Marcelo

146

Page 1 September 2014EMC'2014 Software Model Checking  

E-Print Network [OSTI]

Page 1 September 2014EMC'2014 Dynamic Software Model Checking Patrice Godefroid Microsoft Research #12;Page 2 September 2014EMC'2014 Ed Clarke: A man, An idea... · LASER'2011 summer school (Elba island, Italy) #12;Page 3 September 2014EMC'2014 Ed Clarke: A man, An idea... · LASER'2011 summer school (Elba

Clarke, Edmund M.

147

Polymorphic CSP Type Checking Ping Gao and Robert Esser  

E-Print Network [OSTI]

Polymorphic CSP Type Checking Ping Gao and Robert Esser Concurrent and Real­time Systems Laboratory@cs.adelaide.edu.au Abstract Communicating Sequential Processes (CSP) is a lan­ guage used to describe and reason about between a conventional functional lan­ guage type checker and a type checker for the CSP language

Esser, Robert

148

The Perfect ``Spy'' for Model-Checking Cryptoprotocols  

E-Print Network [OSTI]

its inference system, in the process algebra CSP. Techniques for keeping the state space within Processes (CSP), as are specifications such as confidentiality. The model checking exploits (and has in turn attractive decomposition would provide a two-state process for each possible ``fact'', essentially

Roscoe, Bill

149

Rev. January 30, 2012 1 REFERENCE and BACKGROUND CHECK  

E-Print Network [OSTI]

Rev. January 30, 2012 1 REFERENCE and BACKGROUND CHECK PROCESS HUMAN RESOURCES Workforce Planning, as allowed by law, and consistent with the job described. The appropriate Workforce Planning Analyst the documentation. (Please note that the review will take place in Human Resources, under a Workforce Planning

Eirinaki, Magdalini

150

Check it out! -1 -| P a g e  

E-Print Network [OSTI]

sustainable living guide. I - Courtesy of R.Millar ConsumptionCheck it out! #12;- 1 - | P a g e Making sustainable choices are beneficial not only to the nature from beginner to advanced sustainability practices, so you can do you! Enjoy the B.U. Be Green

151

Air Quality  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Why Air Quality Air Quality To preserve our existing wilderness-area air quality, LANL implements a conscientious program of air monitoring. April 12, 2012 Real-time data...

152

Removable check valve for use in a nuclear reactor  

DOE Patents [OSTI]

A removable check valve for interconnecting the discharge duct of a pump and an inlet coolant duct of a reactor core in a pool-type nuclear reactor. A manifold assembly is provided having an outer periphery affixed to and in fluid communication with the discharge duct of the pump and has an inner periphery having at least one opening therethrough. A housing containing a check valve is located within the inner periphery of the manifold. The upper end of the housing has an opening in alignment with the opening in the manifold assembly, and seals are provided above and below the openings. The lower end of the housing is adapted for fluid communication with the inlet duct of the reactor core.

Dunn, Charlton (Calabasas, CA); Gutzmann, Edward A. (Simi Valley, CA)

1988-01-01T23:59:59.000Z

153

Formalization of the data flow diagram rules for consistency check  

E-Print Network [OSTI]

In system development life cycle (SDLC), a system model can be developed using Data Flow Diagram (DFD). DFD is graphical diagrams for specifying, constructing and visualizing the model of a system. DFD is used in defining the requirements in a graphical view. In this paper, we focus on DFD and its rules for drawing and defining the diagrams. We then formalize these rules and develop the tool based on the formalized rules. The formalized rules for consistency check between the diagrams are used in developing the tool. This is to ensure the syntax for drawing the diagrams is correct and strictly followed. The tool automates the process of manual consistency check between data flow diagrams.

Ibrahim, Rosziati; 10.5121/ijsea.2010.1406

2010-01-01T23:59:59.000Z

154

Patterned Fabric Know - How (Plaids, Stripes, Checks, and Figured Designs).  

E-Print Network [OSTI]

DC \\1\\245.7 '13 Fbiterned Fabric mow-Kbw Contents Design Principles and Patterned Fabrics Pattern Selection Fabric Construction Selecting and Preparing Fabric Kinds of Plaids and Stripes Pri nts Other Patterned Fabrics Combining..., Stripes, Checks and Figured Designs) Extension Clothing Specialists The Texas A&M University System Patterned fabrics provide an interesting di mension to anyone's wardrobe. In a garment or as an accent, patterned fabrics are colorful and ex citing...

Anoymous,

1984-01-01T23:59:59.000Z

155

SEP Success Story: Library Patrons in New York Check-Out Renewable...  

Broader source: Energy.gov (indexed) [DOE]

Library Patrons in New York Check-Out Renewable Energy SEP Success Story: Library Patrons in New York Check-Out Renewable Energy December 27, 2011 - 10:05am Addthis The public...

156

Energy Savings Tips on the Go: Check Out the New Energy Savers...  

Broader source: Energy.gov (indexed) [DOE]

Energy Savings Tips on the Go: Check Out the New Energy Savers Mobile Site Energy Savings Tips on the Go: Check Out the New Energy Savers Mobile Site March 16, 2012 - 12:46pm...

157

The Energy Doctor Is In: Home Check-Ups to Save You Money | Department...  

Broader source: Energy.gov (indexed) [DOE]

The Energy Doctor Is In: Home Check-Ups to Save You Money The Energy Doctor Is In: Home Check-Ups to Save You Money August 26, 2010 - 11:46am Addthis Andy Oare Andy Oare Former New...

158

Turbo Codes are Low Density Parity Check Codes David J. C. MacKay  

E-Print Network [OSTI]

Turbo Codes are Low Density Parity Check Codes David J. C. MacKay July 8, 1998--- Draft 0.2, not for distribution! (First draft written July 5, 1998) Abstract Turbo codes and Gallager codes (also known as low note that the parity check matrix of a Turbo code can be written as low density parity check matrix

MacKay, David J.C.

159

Instructions to obtain apostille certification of the FBI background check (Valencia Year-Long Students)  

E-Print Network [OSTI]

Instructions to obtain apostille certification of the FBI background check (Valencia Year-Long Students) Once you have received the FBI background check. You will need to proceed with step two, obtain not waste time submitting your FBI Background Check for certification. 1.) Complete the DS-4194 Request

Hull, Elaine

160

INTENT TO ENROLL ADVANCED TUITION DEPOSIT BY CHECK/MONEY ORDER  

E-Print Network [OSTI]

ATDP INTENT TO ENROLL ADVANCED TUITION DEPOSIT BY CHECK/MONEY ORDER Important Note: Complete Deposit with a check or money order made payable to Portland State University. This $200 deposit in courses at Portland State University for fall term. Enclosed is a check/money order made payable

Note: This page contains sample records for the topic "quality check results" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Modelling Chinese Smart Grid: A Stochastic Model Checking Case Study  

E-Print Network [OSTI]

Cyber-physical systems integrate information and communication technology functions to the physical elements of a system for monitoring and controlling purposes. The conversion of traditional power grid into a smart grid, a fundamental example of a cyber-physical system, raises a number of issues that require novel methods and applications. In this context, an important issue is the verification of certain quantitative properties of the system. In this technical report, we consider a specific Chinese Smart Grid implementation and try to address the verification problem for certain quantitative properties including performance and battery consumption. We employ stochastic model checking approach and present our modelling and analysis study using PRISM model checker.

Yüksel, Ender; Nielson, Flemming; Zhu, Huibiao; Huang, Heqing

2012-01-01T23:59:59.000Z

162

SciTech Connect: Unitarity check in gravitational Higgs mechanism  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administrationcontroller systemsBi (2) Sr (2) CawithMicrofluidicJournal Article: Unitarity check in

163

Check Burner Air to Fuel Ratios | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana. DOCUMENTS AVAILABLE FORSuperior Energy5-1 Chapter 5 Loswhen to check and

164

DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

organisation conducting these activities should have an ITER approved QA Program or an ISO 9001 accredited quality system. The general requirements are detailed in ITER document...

165

DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

MAI Machine Assembly and Installation (Section) MQP Management and Quality Program NDE Non-Destructive test and Examination PIA Protection Important Activity PIC Protection...

166

Model Checking for Industrial Applications Bernd-Holger Schlinglo  

E-Print Network [OSTI]

Quality assurance in software development Formal design methods Safety-critical systems Reactive programs, multimedia, graphical user interfaces, ... H. Schlinglo , BISS 3 / 72 #12;Software quality assurance Why rules suggests rules { usually expert knowledge required { not accepted by system engineers Automatic

Schlingloff, Holger

167

Quality Assurance Specialist  

Broader source: Energy.gov [DOE]

Alternate Title(s):Quality Control Technician; Quality Assurance Inspector; Quality Assurance Representative

168

Results of the WFPC2 SM3a Lyman-Throughput Check (proposals 8492, 8494,  

E-Print Network [OSTI]

and F122M filters, are designed to monitor the far-UV throughput for any signs of degradation which may and I. Heyer March 16, 2000 ABSTRACT The far-UV throughput of WFPC2 was monitored during December 1999 and January 2000 for any signs of unexpected throughput degradation following Servicing Mission 3a

Sirianni, Marco

169

E-Print Network 3.0 - annual health check Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

schedule your annual physical and make... telephone: 5152484800 April 19, 2010 Health Care Reform and Your Benefits As you know, the House... of Representatives passed the Senate...

170

Quality Management  

Broader source: Energy.gov [DOE]

The Office of Quality Management, within the Office of Health, Safety and Security develops policies and procedures to ensure the classification and control of information is effective and...

171

NUPRO process vent/MCO check valve - prevent backflow from process vent into MCO  

SciTech Connect (OSTI)

NUPRO process vent/MCO check valve - prevent backflow from process vent into MCO CGI-SNF-D-30-3-P4-040.

VAN KATWIJK, C.

1999-07-01T23:59:59.000Z

172

A project health check for coal mining caompanies : case of Douglas Middelburg optimisation project .  

E-Print Network [OSTI]

??The purpose of the study is to develop a project health check model to evaluate the status of projects within the coal mining industry. The… (more)

De Wet, G.F.

2007-01-01T23:59:59.000Z

173

Cerro Grande Fire Impact to Water Quality and Stream Flow near Los Alamos National Laboratory: Results of Four Years of Monitoring  

SciTech Connect (OSTI)

In May 2000, the Cerro Grande fire burned about 7400 acres of mixed conifer forest on the Los Alamos National Laboratory (LANL), and much of the 10,000 acres of mountainside draining onto LANL was severely burned. The resulting burned landscapes raised concerns of increased storm runoff and transport of contaminants by runoff in the canyons traversing LANL. The first storms after the fire produced runoff peaks that were more than 200 times greater than prefire levels. Total runoff volume for the year 2000 increased 50% over prefire years, despite a decline in total precipitation of 13% below normal and a general decrease in the number of monsoonal thunderstorms. The majority of runoff in 2000 occurred in the canyons at LANL south of Pueblo Canyon (70%), where the highest runoff volume occurred in Water Canyon and the peak discharge occurred in Pajarito Canyon. This report describes the observed effects of the Cerro Grande fire and related environmental impacts to watersheds at and near Los Alamos National Laboratory (LANL) for the first four runoff seasons after the fire, from 2000 through 2003. Spatial and temporal trends in radiological and chemical constituents that were identified as being associated with the Cerro Grande fire and those that were identified as being associated with historic LANL discharges are evaluated with regard to impacts to the Rio Grande and area reservoirs downstream of LANL. The results of environmental sampling performed by LANL, the New Mexico Environment Department (NMED), and U.S. Geological Survey (USGS) after the Cerro Grande fire are included in the evaluation. Effects are described for storm runoff, baseflow, stream sediments, and area regional reservoir sediment.

B.M. Gallaher; R.J. Koch

2004-09-15T23:59:59.000Z

174

Date Submitted: January 2013 Reason for Submission: (Check One)  

E-Print Network [OSTI]

to ensure an efficient, high quality and profitable food service. The Executive Chef directs and motivates) The Executive Chef is a collaborate member of the Food, Beverage and Events senior management team responsible for the development of long-term strategy and tactics related to the overall Food, Beverage and Events area's business

Habib, Ayman

175

Quantifying the Parallelism in BPMN Processes using Model Checking  

E-Print Network [OSTI]

a valuable guide for the problem of resource allocation in business processes. In this paper, we investigate . time and space, with a beginning and an end [5]. Business process modelling is an important area process efficiency and quality. More precisely, it is a stage to model activities, their causal

Paris-Sud XI, Université de

176

Quality Policy  

Broader source: Energy.gov [DOE]

Quality Policy It is the policy of the Department of Energy to establish quality requirements to ensure that risks and environmental impacts are minimized and that safety, reliability, and performance are maximized through the application of effective management systems commensurate with the risks posed by the facility or activity and its work. The Department implements this policy through the QA Order and the QA rule directives to ensure quality assurance requirements are clearly specified for the broad spectrum of work performed by DOE and its contractors.

177

Page 1 of 14 5/2010 LBNL Construction Safety Check List  

E-Print Network [OSTI]

Page 1 of 14 5/2010 LBNL Construction Safety Check List Safety Check List MUST be posted at the job (LBNL) Project Manager for review and final approval the LBNL Construction Safety Engineer must reviewed performing work at LBNL. These items and all other requirements in the contractual documents will be enforced

Knowles, David William

178

Equivalence Checking between Function Block Diagrams and C Programs Using HW-CBMC  

E-Print Network [OSTI]

(RPS) in Korea. Our approach is effective to check equivalence between FBDs and ANSI-C programs: Equivanelce Checking, Behavioral Consistency, FBDs, Ver- ilog, ANSI-C, HW-CBMC. 1 Introduction Controllers Heidelberg 2011 #12;398 D.-A. Lee, J. Yoo, and J.-S. Lee FBDs program into ANSI-C program to compile

179

A Tool for Checking ANSI-C Programs Edmund Clarke, Daniel Kroening, and Flavio Lerda  

E-Print Network [OSTI]

A Tool for Checking ANSI-C Programs Edmund Clarke, Daniel Kroening, and Flavio Lerda Carnegie Mellon University Abstract. We present a tool for the formal verification of ANSI-C pro- grams using Bounded Model Checking (BMC). The emphasis is on us- ability: the tool supports almost all ANSI-C language

Clarke, Edmund M.

180

Context-Bounded Model Checking of LTL Properties for ANSI-C Software  

E-Print Network [OSTI]

Context-Bounded Model Checking of LTL Properties for ANSI-C Software Jeremy Morse1 , Lucas Cordeiro in low-level programming languages like ANSI- C. In this paper, we describe and experiment such as ANSI-C [9, 23, 17]. In context-bounded model checking, the state spaces of such applications

Note: This page contains sample records for the topic "quality check results" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

SMT-Based Bounded Model Checking for Embedded ANSI-C Software Lucas Cordeiro  

E-Print Network [OSTI]

SMT-Based Bounded Model Checking for Embedded ANSI-C Software Lucas Cordeiro University to the verification of embedded soft- ware written in ANSI-C. We have extended the encodings from previous SMT. Keywords-Bounded Model Checking; Satisfiability Modulo Theories; Embedded ANSI-C Software; I. INTRODUCTION

182

CONCATENATED CODES BASED ON MULTIDIMENSIONAL PARITY-CHECK CODES AND TURBO CODES  

E-Print Network [OSTI]

CONCATENATED CODES BASED ON MULTIDIMENSIONAL PARITY-CHECK CODES AND TURBO CODES John M. Shea, Florida Abstract--Turbo-codes provide communications near capac- ity when very large interleavers (and parity-check code can be used as an outer code with a turbo code as an inner code in a serial

Wong, Tan F.

183

Statistical Model Checking for Distributed Probabilistic-Control Hybrid Automata with  

E-Print Network [OSTI]

Statistical Model Checking for Distributed Probabilistic-Control Hybrid Automata with Smart Grid accurately model real-world power consumption). We propose Distributed Probabilistic-Control Hybrid Automata and apply existing statistical model- checking techniques. We provide an implementation of a framework

Platzer, André

184

Quality Assurance  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish an effective management system [i.e., quality assurance programs (QAPs)] using the performance requirements of this Order, coupled with technical standards where appropriate. Cancels DOE O 414.1.

1999-09-29T23:59:59.000Z

185

Quality Assurance  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Order ensures that the quality of DOE/NNSA products and services meets or exceeds the customers' expectations. Cancels DOE O 414.1B and DOE N 411.1. Canceled by DOE O 414.1D.

2005-06-17T23:59:59.000Z

186

Geothermal steam quality testing  

SciTech Connect (OSTI)

Geothermal steam quality and purity have a significant effect on the operational efficiency and life of geothermal steam turbines and accessory equipment. Poor steam processing can result in scaled nozzles/blades, erosion, corrosion, reduced utilization efficiency, and early fatigue failures accelerated by stress corrosion cracking (SCC). Upsets formed by undetected slugs of liquid entering the turbine can cause catastrophic failure. The accurate monitoring and determination of geothermal steam quality/purity is intrinsically complex which often results in substantial errors. This paper will review steam quality and purity relationships, address some of the errors, complexities, calibration and focus on: thermodynamic techniques for evaluating and monitoring steam quality by use of the modified throttling calorimeters.

Jung, D.B. [Two-Phase Engineering & Research, Inc., Santa Rosa, CA (United States)

1995-12-31T23:59:59.000Z

187

Quality Assurance  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Order ensures that the quality of DOE/NNSA products and services meets or exceeds the customer's expectations. This Order cancels DOE O 414.1A, Quality Assurance, dated 9-29-99, and Attachment 1, paragraph 8, and Attachment 2, paragraph 22, of DOE O 440.1A, Worker Protection Management for DOE Federal and Contractor Employees, dated 3-27-98. Cancels: DOE O 414.1A and DOE O 440.1A, parts as noted.

2004-04-29T23:59:59.000Z

188

Total quality management implementation guidelines  

SciTech Connect (OSTI)

These Guidelines were designed by the Energy Quality Council to help managers and supervisors in the Department of Energy Complex bring Total Quality Management to their organizations. Because the Department is composed of a rich mixture of diverse organizations, each with its own distinctive culture and quality history, these Guidelines are intended to be adapted by users to meet the particular needs of their organizations. For example, for organizations that are well along on their quality journeys and may already have achieved quality results, these Guidelines will provide a consistent methodology and terminology reference to foster their alignment with the overall Energy quality initiative. For organizations that are just beginning their quality journeys, these Guidelines will serve as a startup manual on quality principles applied in the Energy context.

Not Available

1993-12-01T23:59:59.000Z

189

CSP 542: Internet Design and Analysis Eric Siegel, Designing Quality-of-Service Solutions for the Enterprise, John Wiley and Sons, ISBN 0471333131  

E-Print Network [OSTI]

CSP 542: Internet Design and Analysis Texts Eric Siegel, Designing Quality-of-Service Solutions March 2006 (html, css checks) CSP 542: Internet Design and Analysis - CS Dept, Illinois ... 1 of 1 #12;

Heller, Barbara

190

File: How to Meet the Health Check Secure Remote Access Page 1 of 7 January 2013 Security Requirements  

E-Print Network [OSTI]

Requirements Technology Help Desk 412 624-HELP [4357] http://technology.pitt.edu How to Meet the Health Check......................................................................................................................................................................................4 Get Help.....................................................................................................................................................................................................6 Appendix: Anti-virus Tools (Products and Versions) Compatible with the Health Check

Jiang, Huiqiang

191

Steam Quality  

E-Print Network [OSTI]

"STEAM QUALITY has been generally defined as the amount of moisture/vapor (or lack thereof) contained within steam produced from some form of boiler. It has long been used as the standard term for the measurement of ""wet or dry"" steam and as a...

Johnston, W.

192

Quality Assurance  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To provide Department of Energy (DOE) policy, set forth principles, and assign responsibilities for establishing, implementing, and maintaining programs of plans and actions to assure quality achievement in DOE programs. Canceled by DOE O 5700.6A, dated 7-21-1981.

1981-01-16T23:59:59.000Z

193

Quality Assurance  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To provide Department of Energy (DOE) policy, set forth principles, and assign responsibilities for establishing, implementing, and maintaining programs of plans and actions to assure quality achievement in DOE programs. Cancels DOE O 5700.6, dated 1-16-1981. Canceled by DOE O 5700.6B, dated 9-23-1986.

1981-07-21T23:59:59.000Z

194

On the NP-hardness of checking matrix polytope stability and continuous-time switching stability  

E-Print Network [OSTI]

Motivated by questions in robust control and switched linear dynamical systems, we consider the problem checking whether all convex combinations of k matrices in R[superscript ntimesn] are stable. In particular, we are ...

Gurvits, Leonid

195

Checking Design Constraints at Run-time Using OCL and AspectJ  

E-Print Network [OSTI]

Roach, and Cuauhtemoc Munoz TR #09-35 December 2009 Keywords: design constraints, runtime checking Design Constraints at Run-time Using OCL and AspectJ Yoonsik Cheon (1) , Carmen Avila (1) , Steve Roach

Cheon, Yoonsik

196

A self-checking fiber optic dosimeter for monitoring common errors in brachytherapy applications  

SciTech Connect (OSTI)

Scintillation dosimetry with optical fiber readout [fiber optic dosimetry (FOD)] requires accurate measurement of light intensity. It is therefore vulnerable to loss of calibration if any changes occur in the efficiency of the optical pathway between the scintillator and the light detector. The authors show in this article that common types of errors that arise during clinical use for brachytherapy applications can be quantified using a light emitting diode to stimulate the scintillator, the so-called LED-FOD method, in an integrated and easy-to-use control unit that incorporates a compact peripheral component interconnect extension for instrumentation. Common sources of error include bending and mechanical compression of the fiber optic components and changes in the temperature of the scintillator. The authors show that the method can detect all the common errors studied in this work and that different types of errors can result in different correlations between the LED stimulated signal and the brachytherapy source signal. For a single-type error the LED-FOD can be used easily for system diagnosis and validation with the possibility to correct the dosimeter reading if the correlation between the LED stimulated signal and the brachytherapy source signal can be defined. For more complex errors, resulting from two or more errors occurring simultaneously, the LED-FOD method can also allow the clinician to make a judgment on the reliability of the dosimeter reading. This self-checking method can enhance the clinical robustness of the FOD for achieving accurate dose control.

Yin, Y.; Lambert, J.; Yang, S.; McKenzie, D. R.; Jackson, M.; Suchowerska, N. [Physics School, University of Sydney, New South Wales 2006 (Australia); Physics School, University of Sydney, New South Wales 2006 (Australia) and Department of Radiation Oncology, Royal Prince Alfred Hospital, New South Wales 2050 (Australia); Physics School, University of Sydney, New South Wales 2006 (Australia); Department of Radiation Oncology, Royal Prince Alfred Hospital, New South Wales 2050 (Australia); Physics School, University of Sydney, New South Wales 2006 (Australia) and Department of Radiation Oncology, Royal Prince Alfred Hospital, New South Wales 2050 (Australia)

2009-07-15T23:59:59.000Z

197

Quality Assurance  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish an effective management system [i.e., quality assurance programs(QAPs)] using the performance requirements of this Order, coupled with technical standards where appropriate. Change 1, dated 7/12/01, facilitates the Department's organizational transition necessitated by establishment of the NNSA. (Attachment 2 of this Order is canceled by DOE O 470.2B.) Cancels: DOE O 414.1

2001-07-12T23:59:59.000Z

198

Design Quality Criteria Design Quality Criteria  

E-Print Network [OSTI]

Design Quality Criteria 19 Chapter 2 Design Quality Criteria This chapter discusses what qualities are desirable of an application protocol design, and what quality criteria can be used when evaluating or engineering an application protocol design. We recognize that design quality must be enabled by the design

van Sinderen, Marten

199

Dependence with air density of the response of the PTW SourceCheck ionization chamber for low energy brachytherapy sources  

SciTech Connect (OSTI)

Purpose: Air-communicating well ionization chambers are commonly used to assess air kerma strength of sources used in brachytherapy. The signal produced is supposed to be proportional to the air density within the chamber and, therefore, a density-independent air kerma strength is obtained when the measurement is corrected to standard atmospheric conditions using the usual temperature and pressure correction factor. Nevertheless, when assessing low energy sources, the ionization chambers may not fulfill that condition and a residual density dependence still remains after correction. In this work, the authors examined the behavior of the PTW 34051 SourceCheck ionization chamber when measuring the air kerma strength of {sup 125}I seeds.Methods: Four different SourceCheck chambers were analyzed. With each one of them, two series of measurements of the air kerma strength for {sup 125}I selectSeed{sup TM} brachytherapy sources were performed inside a pressure chamber and varying the pressure in a range from 747 to 1040 hPa (560 to 780 mm Hg). The temperature and relative humidity were kept basically constant. An analogous experiment was performed by taking measurements at different altitudes above sea level.Results: Contrary to other well-known ionization chambers, like the HDR1000 PLUS, in which the temperature-pressure correction factor overcorrects the measurements, in the SourceCheck ionization chamber they are undercorrected. At a typical atmospheric situation of 933 hPa (700 mm Hg) and 20 °C, this undercorrection turns out to be 1.5%. Corrected measurements show a residual linear dependence on the density and, as a consequence, an additional density dependent correction must be applied. The slope of this residual linear density dependence is different for each SourceCheck chamber investigated. The results obtained by taking measurements at different altitudes are compatible with those obtained with the pressure chamber.Conclusions: Variations of the altitude and changes in the weather conditions may produce significant density corrections, and that effect should be taken into account. This effect is chamber-dependent, indicating that a specific calibration is necessary for each particular chamber. To our knowledge, this correction has not been considered so far for SourceCheck ionization chambers, but its magnitude cannot be neglected in clinical practice. The atmospheric pressure and temperature at which the chamber was calibrated need to be taken into account, and they should be reported in the calibration certificate. In addition, each institution should analyze the particular response of its SourceCheck ionization chamber and compute the adequate correction factors. In the absence of a suitable pressure chamber, a possibility for this assessment is to take measurements at different altitudes, spanning a wide enough air density range.

Tornero-López, Ana M.; Guirado, Damián; Ruiz-Arrebola, Samuel [Servicio de Radiofísica y Protección Radiológica, Hospital Universitario San Cecilio, E-18012 Granada (Spain)] [Servicio de Radiofísica y Protección Radiológica, Hospital Universitario San Cecilio, E-18012 Granada (Spain); Perez-Calatayud, Jose [Servicio de Radioterapia, Unidad de Radiofísica, Hospital Universitario y Politécnico La Fe, E-46026 Valencia (Spain)] [Servicio de Radioterapia, Unidad de Radiofísica, Hospital Universitario y Politécnico La Fe, E-46026 Valencia (Spain); Simancas, Fernando; Lallena, Antonio M. [Departamento de Física Atómica, Molecular y Nuclear, Universidad de Granada, E-18071 Granada (Spain)] [Departamento de Física Atómica, Molecular y Nuclear, Universidad de Granada, E-18071 Granada (Spain); Gazdic-Santic, Maja [Department of Medical Physics and Radiation Safety, Clinical Centre of Sarajevo University, 71000 Sarajevo (Bosnia and Herzegovina)] [Department of Medical Physics and Radiation Safety, Clinical Centre of Sarajevo University, 71000 Sarajevo (Bosnia and Herzegovina)

2013-12-15T23:59:59.000Z

200

Mechanical sampling systems for coal quality control in Romanian power plants  

SciTech Connect (OSTI)

According to ISO 1988 samples must be taken from moving currents by using certain mechanical devices, and, only, exceptionally, by an understanding between party`s, by manually sampling. The principal requirements when designing and constructing a mechanical sampling system are that: it shall be capable of collecting and preparing increments or samples, as the case may be, that are free from relevant bias; it shall maintain this capability under all such conditions of sampling that are stipulated in the relevant specifications and without necessitating that sampling be interrupted for cleaning or maintenance. Actually, coal quality control in Romanian power plants are usually performed by a manual system. In order to meet ISO 1988 requirements, RENEL-GSCI (formerly ICEMENERG) has designed and achieved a falling stream sampler with cutter bucket in accordance with ISO 9411-1 (solid mineral fuels - Mechanical sampling from moving stream) provisions. This device has been installed in the Oradea 2 cogeneration power plant in the coal falling stream at the end of the belt conveyor. When the mechanical sampling installation was commissioned, experiments to check for precision and bias had been out for the installation as a whole. The method of checking for bias was by comparison with stopped-belt sampling. The mechanical sampling device is still under testing. The paper presents the result obtained during the preliminary test period in order to certify the mechanical sampler.

Matei, M. [Romanian Electricity Authority, Bucharest (Romania). Study, Research and Engineering Group

1998-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "quality check results" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Data Driven Quality Assurance and Quality Control  

Broader source: Energy.gov [DOE]

"Data Driven Quality Assurance & Quality Control," Patrick Roche, Conservation Services Group. Provides an overview of data QA/QC system design.

202

Distribution power quality measurement program  

SciTech Connect (OSTI)

This paper describes different facets of a distribution system power quality monitoring program with analysis of data from 222 different sites during the project`s first year. Information regarding the site selection process is provided. Preliminary results for voltage harmonic distortion and sags are presented from the project`s study population of feeders, including the use of novel power quality analysis techniques.

Sabin, D.D.; Grebe, T.E.; Melhorn, C.J. [Electrotek Concepts, Inc., Knoxville, TN (United States); Sundaram, A. [Electric Power Research Inst., Palo Alto, CA (United States)

1995-12-31T23:59:59.000Z

203

E-Print Network 3.0 - application quality control Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

quality control Search Powered by Explorit Topic List Advanced Search Sample search results for: application quality control Page: << < 1 2 3 4 5 > >> 1 CSP 587: Software Quality...

204

Data Visualization for Quality-Check Purposes of Monitored Electricity Consumption in All Office Buildings in the ESL Database  

E-Print Network [OSTI]

This report comprises an effort to visualize the monitored electricity consumption in all office buildings (not including the office buildings comprising other functions as classrooms and laboratories, for instance) in the ESL database. This data...

Sreshthaputra, A.; Abushakra, B.; Haberl, J. S.; Claridge, D. E.

2000-01-01T23:59:59.000Z

205

The Multi-Stage Investment Timing Game in Offshore Petroleum Production: Preliminary results from an econometric model  

E-Print Network [OSTI]

robustness checks from the econometric model coefficients inPreliminary results from an econometric model C. -Y.paper uses a structural econometric model to analyze the

Lin, C.-Y. Cynthia

2007-01-01T23:59:59.000Z

206

Ref. No. FU4301 Prepd. KIN Edition 1 Checked MNSJ  

E-Print Network [OSTI]

high above the water surface, so even the highest waves cannot reach the structure. 1.1 The principle Calculate the average power produced by a single float of diameter 10 meter in a regular 2 meter heigh wave with experimental results in regular waves. In theory the power produced in regular waves of a certain wave period

207

Air Quality and Outdoor Activity Guidance for Schools Regular physical activity --at least 60 minutes each day --promotes health and fitness. The table below shows when and how to  

E-Print Network [OSTI]

Air Quality and Outdoor Activity Guidance for Schools Regular physical activity -- at least 60 physical activity based on the Air Quality Index. This guidance can help protect the health of all children, including teenagers, who are more sensitive than adults to air pollution. Check the air quality daily at www

208

Construction quality assurance report  

SciTech Connect (OSTI)

This report provides a summary of the construction quality assurance (CQA) observation and test results, including: The results of the geosynthetic and soil materials conformance testing. The observation and testing results associates with the installation of the soil liners. The observation and testing results associated with the installation of the HDPE geomembrane liner systems. The observation and testing results associated with the installation of the leachate collection and removal systems. The observation and testing results associated with the installation of the working surfaces. The observation and testing results associated with in-plant manufacturing process. Summary of submittal reviews by Golder Construction Services, Inc. The submittal and certification of the piping material specifications. The observation and verification associated of the Acceptance Test Procedure results of the operational equipment functions. Summary of the ECNs which are incorporated into the project.

Roscha, V.

1994-09-08T23:59:59.000Z

209

Tank 30 and 37 Supernatant Sample Cross-Check and Evaporator Feed Qualification Analysis-2012  

SciTech Connect (OSTI)

This report summarizes the analytical data reported by the F/H and Savannah River National Laboratories for the 2012 cross-check analysis for high level waste supernatant liquid samples from SRS Tanks 30 and 37. The intent of this Tank 30 and 37 sample analyses was to perform cross-checks against routine F/H Laboratory analyses (corrosion and evaporator feed qualification programs) using samples collected at the same time from both tanks as well as split samples from the tanks.

Oji, L. N.

2013-03-07T23:59:59.000Z

210

Hydrogen Fuel Quality  

SciTech Connect (OSTI)

For the past 6 years, open discussions and/or meetings have been held and are still on-going with OEM, Hydrogen Suppliers, other test facilities from the North America Team and International collaborators regarding experimental results, fuel clean-up cost, modeling, and analytical techniques to help determine levels of constituents for the development of an international standard for hydrogen fuel quality (ISO TC197 WG-12). Significant progress has been made. The process for the fuel standard is entering final stages as a result of the technical accomplishments. The objectives are to: (1) Determine the allowable levels of hydrogen fuel contaminants in support of the development of science-based international standards for hydrogen fuel quality (ISO TC197 WG-12); and (2) Validate the ASTM test method for determining low levels of non-hydrogen constituents.

Rockward, Tommy [Los Alamos National Laboratory

2012-07-16T23:59:59.000Z

211

Ethers help gasoline quality  

SciTech Connect (OSTI)

In this article three scenarios to evaluate the effect of etherification on gasoline production and quality are reviewed: Base case FCC/C{sub 4} alkylation complex - FCC unit operation for maximum gasoline yield, MTBE unit added to base case FCC unit operation and MTBE unit added to maximum olefins FCC unit operation. Details of the FCC, MTBE and C{sub 4} alkylation operations used in this article are reviewed, followed by a discussion of overall results.

Chang, E.J.; Leiby, S.M. (SRI International, Menlo Park, CA (US))

1992-02-01T23:59:59.000Z

212

Personal Data Sheet Please print clearly and check all that apply  

E-Print Network [OSTI]

EmplID: ePAF #: 14May2012 Personal Data Sheet Please print clearly and check all that apply New No Signature: Date: #12;Personal Data Sheet Ethnic Groups White: A person having origins in any of the original Hire: Personal Email Address:__________________________________________ Record Update: Please use

Wu, Shin-Tson

213

Title: Employee Background Checks Effective Date: October 1, 2011 Responsible Office: Provost  

E-Print Network [OSTI]

for certain university positions. Such checks, screening, or testing, are outside the scope of this policy. II are defined by the Code of Virginia (§ 2.2-1201.1) as those positions designated by the university as directly for all university positions, except for those exclusions made herein. Contract workers or vendors

Shaw, Leah B.

214

welcome to university residences Boiler Gold Rush Check-In...........................Saturday, August 13 and  

E-Print Network [OSTI]

welcome to university residences #12;Boiler Gold Rush Check-In...........................Saturday, August 13 and Sunday, August 14, 2011 Boiler Gold Rush residence hall systems in the United States. weLcomE! 1 #12;Boiler GoLD Rush ParticiPants Your regular

Fernández-Juricic, Esteban

215

USING MODEL CHECKING TO DERIVE LOOP BOUNDS OF GENERAL LOOPS WITHIN ANSI-C APPLICATIONS FOR  

E-Print Network [OSTI]

USING MODEL CHECKING TO DERIVE LOOP BOUNDS OF GENERAL LOOPS WITHIN ANSI-C APPLICATIONS for applications written in ANSI-C. The described method uses a model checker and a binary search algorithm with little pro- gramming effort for applications written in ANSI-C. The performance is probably inferior

216

SMT-Based Bounded Model Checking for Embedded ANSI-C Software  

E-Print Network [OSTI]

1 SMT-Based Bounded Model Checking for Embedded ANSI-C Software Lucas Cordeiro, Bernd Fischer software written in ANSI-C in order to improve scalability and precision in a completely automatic way. We was provided for ANSI-C [5] constructs such as bit-level operations, fixed- point arithmetic, pointers (i

217

Checking Consistency of C and Verilog using Predicate Abstraction and Induction  

E-Print Network [OSTI]

consistency between an ANSI- C program and a circuit given in Verilog using Predicate Abstraction to existing tools that perform predicate abstraction, our approach is SAT-based and allows all ANSI Abstraction, Verilog, SAT, Equivalence Checking #12;1 Introduction ANSI-C is a language designed for best

218

SMT-Based Bounded Model Checking for Embedded ANSI-C Software Lucas Cordeiro  

E-Print Network [OSTI]

SMT-Based Bounded Model Checking for Embedded ANSI-C Software Lucas Cordeiro University to the verification of embedded soft- ware written in ANSI-C. We have extended the encod- ings from previous SMT and linear arithmetic were considered, but no encoding was provided for ANSI-C [6] constructs such as bit

219

Automated Environment Generation for Software Model Checking Oksana Tkachuk, Matthew B. Dwyer  

E-Print Network [OSTI]

Automated Environment Generation for Software Model Checking Oksana Tkachuk, Matthew B. Dwyer programs or about program components, an abstract model of the environment can be essential in enabling environment behavior with sound abstractions of environment implemen­ tations to form a model

Pasareanu, Corina

220

MetaGame: An Animation Tool for Model-Checking Games  

E-Print Network [OSTI]

MetaGame: An Animation Tool for Model-Checking Games Markus M¨uller-Olm1 and Haiseung Yoo2 1 Fern-Verlag Berlin Heidelberg 2004 #12;164 Markus M¨uller-Olm and Haiseung Yoo careful investigation of the cause

Müller-Olm, Markus

Note: This page contains sample records for the topic "quality check results" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

MetaGame: An Animation Tool for ModelChecking Games  

E-Print Network [OSTI]

MetaGame: An Animation Tool for Model­Checking Games Markus MË?uller­Olm 1# and Haiseung Yoo 2 1, pp. 163--167, 2004. c # Springer­Verlag Berlin Heidelberg 2004 #12; 164 Markus MË?uller­Olm

Müller-Olm, Markus

222

Soft-Input, Iterative, Reed-Solomon Decoding using Redundant Parity-Check Equations  

E-Print Network [OSTI]

approach to the iterative decoding of Reed-Solomon (RS) codes. The pre- sented methodology utilizesSoft-Input, Iterative, Reed-Solomon Decoding using Redundant Parity-Check Equations Jason Bellorado techniques is achievable with the presented methodology. The complexity of the proposed algorithm is orders

Kavcic, Aleksandar

223

Compositionality in Real-Time Model Checking Jasper Berendsen and Frits Vaandrager  

E-Print Network [OSTI]

Compositionality in Real-Time Model Checking Jasper Berendsen and Frits Vaandrager Radboud Universiteit Nijmegen Laquso Lunch Colloquium, 8 november 2007 Jasper Berendsen and Vaandrager Compositionality Modules, etc, CCS, I/O automata, ACP, mCRL2, etc Lamport: "In reality there are only states" Jasper

Vaandrager, Frits

224

High throughput low power decoder architectures for low density parity check codes  

E-Print Network [OSTI]

. The dynamic scheme performs X soft iterations, then a parity checker cHT that computes the number of parity checks in error. Based on cHT value, the decoder decides on performing either soft iterations or a hard iteration. The advantage of the hard iteration...

Selvarathinam, Anand Manivannan

2005-11-01T23:59:59.000Z

225

Making Automated Building Code Checking A Reality1 Charles S. Han, John Kunz, Kincho H. Law  

E-Print Network [OSTI]

in the September/October 1997 issue of Facility Management Journal 1 #12;2. A Building Model Standard In orderMaking Automated Building Code Checking A Reality1 Charles S. Han, John Kunz, Kincho H. Law Center set of building codes. The complexity and changing nature of codes leads to delays in both the design

Stanford University

226

Directed and Heuristic Counterexample Generation for Probabilistic Model Checking -A Comparative Evaluation  

E-Print Network [OSTI]

, knwon from the literature on probabilistic model checking and one case study taken from the automotive of the hardware compo- nent. In embedded automotive systems, for instance, the software is often attached and Effect Analysis (pFMEA) [17, 4], is hence inevitably also software dependability analysis. It has been

Leue, Stefan

227

An Optimization Approach for Effective Formalized fUML Model Checking  

E-Print Network [OSTI]

An Optimization Approach for Effective Formalized fUML Model Checking Islam Abdelhalim, Steve that makes use of a restricted CSP model (because it follows certain formalization rules) to optimize; the first one provides optimization advice to the modeller, while the second one au- tomatically applies

Doran, Simon J.

228

Two--mode optical tomograms: a possible experimental check of the Robertson uncertainty relations  

E-Print Network [OSTI]

The experimental check of two--mode Robertson uncertainty relations and inequalities for highest quadrature moments is suggested by using homodyne photon detection. The relation between optical tomograms and symplectic tomograms is used to connect the tomographic dispersion matrix and the quadrature components dispersion matrix of the two--mode field states.

V. I. Man'ko; G. Marmo; A. Simoni; F. Ventriglia

2012-02-02T23:59:59.000Z

229

Advanced Unbounded CTL Model Checking Based on AIGs, BDD Sweeping, And Quantifier  

E-Print Network [OSTI]

and gates and inverters Simple data structure Every Boolean function can be represented by an AIG 5 Florian Networks of 2-input and gates and inverters Simple data structure Every Boolean function can be representedAdvanced Unbounded CTL Model Checking Based on AIGs, BDD Sweeping, And Quantifier Scheduling

Manolios, Panagiotis "Pete"

230

A tool for checking CSP||B specifications Huu Nghia Nguyen, Jean-Pierre Jacquot  

E-Print Network [OSTI]

A tool for checking CSP||B specifications Huu Nghia Nguyen, Jean-Pierre Jacquot LORIA ­ Nancy in the verification of CSP||B specifications. Our primary research goal is methodological: we aim at understanding. One specification may require the use of B for managing some complex data structure, of CSP

Paris-Sud XI, Université de

231

Defining and Model Checking Abstractions of Complex Railway Models using CSP||B  

E-Print Network [OSTI]

Defining and Model Checking Abstractions of Complex Railway Models using CSP||B Faron Moller1. In [11, 10] we propose a new modelling approach for railway interlockings. We use CSP||B [13], which involves events such as train movements and, in the interlocking, state based reasoning. In this sense, CSP

Doran, Simon J.

232

The past, present and future of protocol checking with CSP and FDR  

E-Print Network [OSTI]

AVoCS 2006 The past, present and future of protocol checking with CSP and FDR Bill Roscoe1 Oxford of these meetings was the development of the CSP model of cryptographic protocols, following Gavin Lowe's discovery the particular advantages of using a process algebra, and CSP in particular, for modelling cryptoprotocols

Paris-Sud XI, Université de

233

Revised June 2013 This form can be used if you are: (Please check the appropriate box)  

E-Print Network [OSTI]

a certificate or diploma Changing to a new certificate or diploma Dropping a certificate or diploma * If you are declaring more than one certificate/diploma, please check all that apply on this form. CERTIFICATES Completed: Transfer Credit Hours: Staff Name: Staff Signature: Date: Student # Date of Birth DD/MM/YYYY Last

Northern British Columbia, University of

234

Criminal Background Check Request Form revised 08/13/2013 #404 Page 1 of 2  

E-Print Network [OSTI]

: Recruitment & Workforce Planning MS 1255 jobpath@tamu.edu Fax (979) 847-8877 NEED HELP? Recruitment & Workforce Planning Phone (979) 845-5154 jobpath@tamu.edu #12;Criminal Background Check Request Form revised-google-email-account.html It is important you read, understand and comply with following information: Recruitment and Workforce Planning

Boas, Harold P.

235

Model Checking Large Software Specifications William Chan Richard J. Anderson Paul Beame Steve Burns  

E-Print Network [OSTI]

Model Checking Large Software Specifications William Chan Richard J. Anderson Paul Beame Steve methods for achieving acceptable performance, and giving a sum­ mary of the properties analyzed. Based.J. Anderson, P. Beame, F. Modugno, D. Notkin, and J.D. Reese are with the Department of Computer Science

Beame, Paul

236

Biomedical Engineering AND Electrical Engineering Student Name:_______________________ Curriculum Check Sheet 157 Credits  

E-Print Network [OSTI]

Biomedical Engineering AND Electrical Engineering Student Name:_______________________ Curriculum (PREREQS) TERM CR BIOM 101 Intro to Biomedical Engineering F 3 ECE 103 DC Circuit Analysis (MATH 160) S 3 Biomedical Engineering Courses Rev 11-27-12 Please note that curricula can change; be sure to check with your

237

Office of Quality Assurance  

Broader source: Energy.gov [DOE]

The Office of Quality Assurance establishes and maintains the quality assurance (QA) policies, requirements and guidance for the Department and serves as DOE's corporate resource to ensure that products and services meet or exceed the Department’s quality objectives.

238

LAPTOP COMPUTER CHECKOUT POLICY There are two laptop computers that can be checked out by faculty who need them for  

E-Print Network [OSTI]

LAPTOP COMPUTER CHECKOUT POLICY There are two laptop computers that can be checked out by faculty policy which was adopted by College Council: (1) The pool laptop computers can be checked out for no more than 2 weeks at a time. (2) Reservation requests for portable computers should be submitted at least 1

Selmic, Sandra

239

Log quality enhancement: A systematic assessment of logging company wellsite performance and log quality  

SciTech Connect (OSTI)

To improve the monitoring of logging company performance, computer programs were developed to assess information en masse from log quality check lists completed on wellsite by the service company engineer and Phillips representative. A study of all logging jobs performed by different service companies for Phillips in Oklahoma (panhandle excepted) during 1982 enabled several pertinent and beneficial interpretations to be made. Company A provided the best tool and crew service. Company B incurred an excessive amount of lost time related to tool failure, in particular the neutron-density tool combination. Company C, although used only three times, incurred no lost time. With a reasonable data base valid conclusions were made pertaining, for example, to repeated tool malfunctions. The actual logs were then assessed for quality.

Farnan, R.A.; Mc Hattie, C.M.

1984-01-01T23:59:59.000Z

240

Environmental Quality: Air (Louisiana)  

Broader source: Energy.gov [DOE]

The Department of Environmental Quality regulates air quality in Louisiana. The Department has an established a fee system for funding the monitoring, investigation and other activities required...

Note: This page contains sample records for the topic "quality check results" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Quality Assurance Program Plan  

Broader source: Energy.gov [DOE]

The achievement of quality in LM activities and products requires implementation of a formal Quality Assurance (QA) Program. This program establishes principles, requirements, practices, and...

242

Mechanistic insights into mode of action of potent natural antagonists of BACE-1 for checking Alzheimer’s plaque pathology  

SciTech Connect (OSTI)

Highlights: •Accumulation of A? plaques is one of the major pathology associated with Alzheimer’s disease. •Inhibition of ?-Secretase or BACE-1 offers a viable prospect to check the growth of these plaques. •A large virtual dataset of natural compounds was screened against BACE-1. •Top two hits were analyzed for thermodynamic and structural stability using MD simulations. •Their detailed binding mode of actions were elucidated. -- Abstract: Alzheimer’s is a neurodegenerative disorder resulting in memory loss and decline in cognitive abilities. Accumulation of extracellular beta amyloidal plaques is one of the major pathology associated with this disease. ?-Secretase or BACE-1 performs the initial and rate limiting step of amyloidic pathway in which 37–43 amino acid long peptides are generated which aggregate to form plaques. Inhibition of this enzyme offers a viable prospect to check the growth of these plaques. Numerous efforts have been made in recent years for the generation of BACE-1 inhibitors but many of them failed during the preclinical or clinical trials due to drug related or drug induced toxicity. In the present work, we have used computational methods to screen a large dataset of natural compounds to search for small molecules having BACE-1 inhibitory activity with low toxicity to normal cells. Molecular dynamics simulations were performed to analyze molecular interactions between the screened compounds and the active residues of the enzyme. Herein, we report two natural compounds of inhibitory nature active against ?-secretase enzyme of amyloidic pathway and are potent lead molecules against Alzheimer’s disease.

Dhanjal, Jaspreet Kaur [School of Biotechnology, Jawaharlal Nehru University, New Delhi 110067 (India)] [School of Biotechnology, Jawaharlal Nehru University, New Delhi 110067 (India); Goyal, Sukriti [Apaji Institute of Mathematics and Applied Computer Technology, Banasthali University, Tonk 304022, Rajasthan (India)] [Apaji Institute of Mathematics and Applied Computer Technology, Banasthali University, Tonk 304022, Rajasthan (India); Sharma, Sudhanshu [Department of Biotechnology, Delhi Technological University, New Delhi 110042 (India)] [Department of Biotechnology, Delhi Technological University, New Delhi 110042 (India); Hamid, Rabia [Department of Biochemistry, University of Kashmir, Srinagar 190006 (India)] [Department of Biochemistry, University of Kashmir, Srinagar 190006 (India); Grover, Abhinav, E-mail: abhinavgr@gmail.com [School of Biotechnology, Jawaharlal Nehru University, New Delhi 110067 (India)] [School of Biotechnology, Jawaharlal Nehru University, New Delhi 110067 (India)

2014-01-17T23:59:59.000Z

243

SMT-Based Bounded Model Checking for Embedded ANSI-C Software  

E-Print Network [OSTI]

Propositional bounded model checking has been applied successfully to verify embedded software but is limited by the increasing propositional formula size and the loss of structure during the translation. These limitations can be reduced by encoding word-level information in theories richer than propositional logic and using SMT solvers for the generated verification conditions. Here, we investigate the application of different SMT solvers to the verification of embedded software written in ANSI-C. We have extended the encodings from previous SMT-based bounded model checkers to provide more accurate support for finite variables, bit-vector operations, arrays, structures, unions and pointers. We have integrated the CVC3, Boolector, and Z3 solvers with the CBMC front-end and evaluated them using both standard software model checking benchmarks and typical embedded applications from telecommunications, control systems and medical devices. The experiments show that our approach can analyze larger problems and sub...

Cordeiro, Lucas; Marques-Silva, Joao

2009-01-01T23:59:59.000Z

244

Tuesday, June 24 P. M. noon -4:30 BEAN Registration/Check-in  

E-Print Network [OSTI]

:45 PLC Rehearsal II 5:00 - 6:30 CAR Dinner 7:00 ­ 9:00 CLC Sharing Our Songs Concert I 9:15 ­ 9:45 BEANTuesday, June 24 P. M. noon - 4:30 BEAN Registration/Check-in 5:00 - 7:00 CAR Dinner 7:30 PLC A. M. 7:30 - 8:30 CAR Breakfast (Lead Chaperone/Conductor/Intern mtg.) 9:00 - 11:15 PLC Rehearsal I

Bordenstein, Seth

245

Quality Counts Certificate  

E-Print Network [OSTI]

This certificate accompanies the Quality Counts program. 1 page. It comes in packages of 25 certificates....

Chilek, Kevin

2007-01-31T23:59:59.000Z

246

Wood Quality: The Effects  

E-Print Network [OSTI]

Wood Quality: The Effects of Planting Density and Thinning Eini C. Lowell PNW Research Station wood quality? By volume, characteristic, product? #12;http://jilldenton.files.wordpress.com/2007, faster #12;What is it that defines wood quality?What is it that defines wood quality? Density: earlywood

247

Track 9: Quality Assurance  

Broader source: Energy.gov [DOE]

ISM Workshop Presentations Knoxville Convention Center, Knoxville, TN August 2009 Track 9: Quality Assurance

248

Exploration Of Activity Measurements And Equilibrium Checks For Sediment Dating Using Thick-Window Germanium Detectors  

SciTech Connect (OSTI)

Activity measurements on sediment samples for trapped-charge geological dating using gamma-ray spectroscopy are an important verification of the field-site dose rate determination. Furthermore gamma-ray spectroscopy can check if the natural decay series are in secular equilibrium which is a crucial assumption in such dating. Typically the activities of leading members of the Thorium and Uranium decay series are measured, which requires Germanium detectors with thin windows and good energy resolution in order to effectively detect the associated low energy gamma-rays. Such equipment is not always readily available. The potential of conventional Germanium detectors with thick entrance window has been explored towards routine gamma-ray spectroscopy of sediment samples using higher energy gamma-rays. Alternative isotopes, such as Ac-228 and Pb-212 for the Thorium series, and Pa-234m, Ra-226 and Bi-214 for the Uranium series, have been measured in order to determine the mass-specific activity for the respective series and possibly provide a check of secular equilibrium. In addition to measurements of the K-40 activity, with the alternative approach, the activities of both decay series can be accurately determined. The secular equilibrium condition may be tested for the Thorium series. Measurement accuracy for Pa-234m is, however, not sufficient to permit also a reliable check of equilibrium for the Uranium series.

Warner, Jacob A.; Gladkis, Laura G.; Timmers, Heiko [School of Physical, Environmental and Mathematical Sciences, University of New South Wales at the Australian Defence Force Academy, Canberra ACT 2602 (Australia); Fitzsimmons, Kathryn E. [Department of Human Evolution, Max Planck Institute for Evolutionary Anthropology, Deutscher Platz 6, D-04103 Leipzig (Germany); Reynolds, Eva M. [Research School of Earth Sciences, Australian National University, Canberra ACT 0200 (Australia)

2011-06-01T23:59:59.000Z

249

Soil Quality Information Sheet Rangeland Soil Quality--  

E-Print Network [OSTI]

Soil Quality Information Sheet Rangeland Soil Quality-- Physical and Biological Soil Crusts USDA, Natural Resources Conservation Service May 2001 Rangeland Sheet 7 What are soil crusts? A physical crust is a thin layer with reduced porosity and increased density at the surface of the soil. A biological crust

250

Household Water Quality Home Water Quality Problems  

E-Print Network [OSTI]

in water heater. Scale buildup in pipes and re duced water flow. Hard water due to calcium and magnesiumHousehold Water Quality Home Water Quality Problems­ Causes and Treatments Blake Ross, Extension Many areas have water containing impurities from natural or artificial sources. These impurities may

Liskiewicz, Maciej

251

Heart Health Evaluation The following questions are about today's program. Place a check (T) in front of the answer.  

E-Print Network [OSTI]

EAT SMART Heart Health Evaluation The following questions are about today's program. Place a check not planning to use the information in this program. # I have heart disease or high blood pressure. YES

252

Cancer Evaluation The following questions are about today's program. Place a check (T) in front of the answer.  

E-Print Network [OSTI]

EAT SMART Cancer Evaluation The following questions are about today's program. Place a check (T the information from this program. # I have or have had cancer. YES NO As you answer each question, think about

253

Check-Testing of Manufacturer Self Reported Labeling Data& Compliance with MEPS  

SciTech Connect (OSTI)

China first adopted minimum energy performance standards (MEPS) in 1989. Today, there are standards for a wide range of domestic, commercial and selected industrial equipment. In 1999, China launched a voluntary endorsement label, which has grown to cover over 40 products including water-saving products. Further, in 2005, China started a mandatory energy information label that initially covered two products and in 2007 was extended to cover four products total including: air conditioners; household refrigerators; clothes washers; and unitary air conditioners. These programs have had an important impact in reducing the energy consumption of appliances in China. China has built up a strong infrastructure to develop and implement standards. Historically, however, the government's primary focus has been on the technical requirements for specifying efficiency performance. Less attention has been paid to monitoring and enforcement with a minimal commitment of resources and little expansion of administrative capacity in this area. Thus, market compliance with both mandatory standard and labeling programs has been questionable. Furthermore, actual energy savings have quite possibly been undermined as a result. The establishment of a regularized monitoring system for tracking compliance with the mandatory standard and energy information label programs in China is a major area for program improvement. Over the years, the Collaborative Labeling and Appliance Standards Program (CLASP) has partnered with several Chinese institutions to promote energy-efficient products in China. CLASP, together with its implementing partner Lawrence Berkeley National Laboratory (LBNL), has assisted China in developing and updating the above-mentioned standards and labeling programs. Because of the increasing need for the development of a monitoring system to track compliance with the standard, CLASP, with support from Japan's Ministry of Economy, Trade and Industry (METI) and the Institute of Energy Economics, Japan (IEEJ), has expanded its on-going collaboration with the China National Institute of Standards (CNIS) to include enforcement and monitoring. CNIS has already begun working on the issue of compliance. In early 2007, LBNL compiled a report, with the support of METI, summarizing the findings from these activities and indicating China's progress to date. The report concluded that although the existing legal basis for monitoring and enforcement is sufficient- with multiple laws and regulations defining the responsibility of each government agency and specifying a system of fines and penal-ties for non-compliance-compared with international best practices, there is still a big gap in China's monitoring and enforcement efforts for mandatory standards and labels. In sum, the report concludes that while the sample size is far smaller than the mid-term goal of developing a regular check testing program for 20 percent of the market for each of the three products, this study provides highly valuable feedback on manufacturer compliance rates in the absence of a large-scale national testing program. With METI/IEEJ support, CLASP could assist the China Energy Label Center (CELC) in expanding its verification testing programs to cover more models and products, and in developing a plan for ramping up the national verification testing program over the next three to five years. This is particularly important as the information labeling program gains more visibility and expands to additional product categories. CLASP could also assist CELC to plan for a round-robin testing scheme-first among three national laboratories with sub-sequent expansion of this program to other regional test laboratories--with the goal of improving the consistency of testing results from different testing laboratories.

Zhou, Nan; Zhou, Nan; Zheng, Nina; Fridley, David; Wang, Ruohong; Egan, Christine

2008-03-01T23:59:59.000Z

254

Cross-check of ex-situ and in-situ metrology of a bendable temperature stabilized KB mirror  

SciTech Connect (OSTI)

At the Advanced Light Source (ALS), we are developing broadly applicable, high-accuracy, in-situ, at-wavelength wavefront slope measurement techniques for Kirkpatrick-Baez (KB) mirror nano-focusing. In this paper, we report an initial cross-check of ex-situ and in-situ metrology of a bendable temperature stabilized KB mirror. This cross-check provides a validation of the in-situ shearing interferometry currently under development at the ALS.

Yuan, Sheng Sam; Goldberg, Kenneth A.; Yashchuk, Valeriy V.; Celestre, Richard; McKinney, Wayne R.; Morrison, Gregory; Macdougall, James; Mochi, Iacopo; Warwick, Tony

2010-09-15T23:59:59.000Z

255

General Water Quality (Oklahoma)  

Broader source: Energy.gov [DOE]

The purpose of this water quality rule is to protect, maintain and improve the quality of waters of the State. Any applicant for a federal license, permit or project to conduct any activity...

256

State Water Quality (Virginia)  

Broader source: Energy.gov [DOE]

It is the policy of the Commonwealth of Virginia to: (1) protect existing high quality state waters and restore the quality of all other state waters to permit all reasonable public uses and...

257

Downhole steam quality measurement  

DOE Patents [OSTI]

An empirical method for the remote sensing of steam quality that can be easily adapted to downhole steam quality measurements by measuring the electrical properties of two-phase flow across electrode grids at low frequencies.

Lee, David O. (Albuquerque, NM); Montoya, Paul C. (Albuquerque, NM); Muir, James F. (Albuquerque, NM); Wayland, Jr., J. Robert (Albuquerque, NM)

1987-01-01T23:59:59.000Z

258

A computer test bench for checking and adjusting the automatic regulators of generator excitation systems  

SciTech Connect (OSTI)

A computer test bench for testing and debugging natural samples of the automatic excitation regulation systems of generators, the protection units and the power part of the excitation system is described. The bench includes a personal computer with specialized input-output circuit boards for analog and digital signals, and enables the time and cost involved in developing and checking control systems to be reduced considerably. The program employed operates in real time and enables the automatic excitation regulators of synchronous generators and generators with longitudinal-transverse excitation in a specific power system to be adjusted.

Dovganyuk, I. Ya.; Labunets, I. A.; Plotnikova, T. V.; Sokur, P. V. [Affiliate of the 'NTTs Elektroenergetiki' Company - Scientific Research Institute of Electric Power (VNIIE) (Russian Federation)

2008-05-15T23:59:59.000Z

259

Check Out the New Alternative Fuel Station Locator | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTieCelebrate Earth Day withCharacterizationDiesel LosDepartment4 *Check

260

File:Temporary storage plan review check list.pdf | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublicIDAPowerPlantSitingConstruction.pdfNotify98.pdf Jump to: navigation,storage plan review check list.pdf Jump

Note: This page contains sample records for the topic "quality check results" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Waste Management Quality Assurance Plan  

E-Print Network [OSTI]

Revision 6 Waste Management Quality Assurance Plan Waste6 WM QA Plan Waste Management Quality Assurance Plan LBNL/4 Management Quality Assurance

Waste Management Group

2006-01-01T23:59:59.000Z

262

A Construction of Quantum Stabilizer Codes Based on Syndrome Assignment by Classical Parity-Check Matrices  

E-Print Network [OSTI]

In quantum coding theory, stabilizer codes are probably the most important class of quantum codes. They are regarded as the quantum analogue of the classical linear codes and the properties of stabilizer codes have been carefully studied in the literature. In this paper, a new but simple construction of stabilizer codes is proposed based on syndrome assignment by classical parity-check matrices. This method reduces the construction of quantum stabilizer codes to the construction of classical parity-check matrices that satisfy a specific commutative condition. The quantum stabilizer codes from this construction have a larger set of correctable error operators than expected. Its (asymptotic) coding efficiency is comparable to that of CSS codes. A class of quantum Reed-Muller codes is constructed, which have a larger set of correctable error operators than that of the quantum Reed-Muller codes developed previously in the literature. Quantum stabilizer codes inspired by classical quadratic residue codes are also constructed and some of which are optimal in terms of their coding parameters.

Ching-Yi Lai; Chung-Chin Lu

2007-12-02T23:59:59.000Z

263

Quality Assessment in Oncology  

SciTech Connect (OSTI)

The movement to improve healthcare quality has led to a need for carefully designed quality indicators that accurately reflect the quality of care. Many different measures have been proposed and continue to be developed by governmental agencies and accrediting bodies. However, given the inherent differences in the delivery of care among medical specialties, the same indicators will not be valid across all of them. Specifically, oncology is a field in which it can be difficult to develop quality indicators, because the effectiveness of an oncologic intervention is often not immediately apparent, and the multidisciplinary nature of the field necessarily involves many different specialties. Existing and emerging comparative effectiveness data are helping to guide evidence-based practice, and the increasing availability of these data provides the opportunity to identify key structure and process measures that predict for quality outcomes. The increasing emphasis on quality and efficiency will continue to compel the medical profession to identify appropriate quality measures to facilitate quality improvement efforts and to guide accreditation, credentialing, and reimbursement. Given the wide-reaching implications of quality metrics, it is essential that they be developed and implemented with scientific rigor. The aims of the present report were to review the current state of quality assessment in oncology, identify existing indicators with the best evidence to support their implementation, and propose a framework for identifying and refining measures most indicative of true quality in oncologic care.

Albert, Jeffrey M. [Department of Radiation Oncology, University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Das, Prajnan, E-mail: prajdas@mdanderson.org [Department of Radiation Oncology, University of Texas MD Anderson Cancer Center, Houston, Texas (United States)

2012-07-01T23:59:59.000Z

264

Rangeland Sheet 6 Soil Quality Information Sheet  

E-Print Network [OSTI]

decomposition. Chemically stable organic matter gives soil its dark color and is generally the largest pool. Increasing levels of organic matter promote a higher water- holding capacity, which results in increasedRangeland Sheet 6 Soil Quality Information Sheet Rangeland Soil Quality--Organic Matter USDA

265

Quality assurance of asymmetric jaw alignment using 2D diode array  

SciTech Connect (OSTI)

Purpose: A method using a 2D diode array is proposed to measure the junction gap (or overlap) and dose with high precision for routine quality assurance of the asymmetric jaw alignment.Methods: The central axis (CAX) of the radiation field was determined with a 15 × 15 cm{sup 2} photon field at four cardinal collimator angles so that the junction gap (or overlap) can be measured with respect to the CAX. Two abutting fields having a field size of 15 cm (length along the axis parallel to the junction) × 7.5 cm (width along the axis perpendicular to the junction) were used to irradiate the 2D diode array (MapCHECK2) with 100 MU delivered at the photon energy of 6 MV. The collimator was slightly rotated at 15° with respect to the beam central axis to increase the number of diodes effective on the measurement of junction gap. The junction gap and dose measured in high spatial resolution were compared to the conventional methods using an electronic portal imaging device (EPID) and radiochromic film, respectively. In addition, the reproducibility and sensitivity of the proposed method to the measurements of junction gap and dose were investigated.Results: The junction gap (or overlap) and dose measured by MapCHECK2 agreed well to those measured by the conventional methods of EPID and film (the differences ranged from ?0.01 to 0 cm and from ?1.34% to 0.6% for the gap and dose, respectively). No variation in the repeat measurements of the junction gap was found whereas the measurements of junction dose were found to vary in quite a small range over the days of measurement (0.21%–0.35%). While the sensitivity of the measured junction gap to the actual junction gap applied was the ideal value of 1 cm/cm as expected, the sensitivity of the junction dose to the actual junction gap increased as the junction gap (or overlap) decreased (maximum sensitivity: 201.7%/cm).Conclusions: The initial results suggest that the method is applicable for a comprehensive quality assurance of the asymmetric jaw alignment.

Kim, Sun Mo [Department of Medical Physics, Stronach Regional Cancer Centre, Southlake Regional Health Centre, Newmarket, Ontario L3Y 2P9, Canada and Radiation Medicine Program, Princess Margaret Hospital/University Health Network, Toronto, Ontario M5G 2M9 (Canada)] [Department of Medical Physics, Stronach Regional Cancer Centre, Southlake Regional Health Centre, Newmarket, Ontario L3Y 2P9, Canada and Radiation Medicine Program, Princess Margaret Hospital/University Health Network, Toronto, Ontario M5G 2M9 (Canada); Chmielewski, Renata; Abbas, Ahmar [Department of Medical Physics, Stronach Regional Cancer Centre, Southlake Regional Health Centre, Newmarket, Ontario L3Y 2P9 (Canada)] [Department of Medical Physics, Stronach Regional Cancer Centre, Southlake Regional Health Centre, Newmarket, Ontario L3Y 2P9 (Canada); Yeung, Ivan W. T.; Moseley, Douglas J. [Department of Medical Physics, Stronach Regional Cancer Centre, Southlake Regional Health Centre, Newmarket, Ontario L3Y 2P9 (Canada) [Department of Medical Physics, Stronach Regional Cancer Centre, Southlake Regional Health Centre, Newmarket, Ontario L3Y 2P9 (Canada); Radiation Medicine Program, Princess Margaret Hospital/University Health Network, Toronto, Ontario M5G 2M9 (Canada); Department of Radiation Oncology, University of Toronto, Ontario M5G 2M9 (Canada)

2013-12-15T23:59:59.000Z

266

E-Print Network 3.0 - analytical quality control Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

this trial and error process without sacrificing quality. Process control... the design process, and result in better quality products. A neural model can also supplement...

267

Quality assurance and data management  

SciTech Connect (OSTI)

This report contains graphs and tables relating to quality assurance and data management for environmental quality at Hanford Reservation.

Lockrem, L.L.

1998-01-12T23:59:59.000Z

268

Downhole steam quality measurement  

DOE Patents [OSTI]

The present invention relates to an empirical electrical method for remote sensing of steam quality utilizing flow-through grids which allow measurement of the electrical properties of a flowing two-phase mixture. The measurement of steam quality in the oil field is important to the efficient application of steam assisted recovery of oil. Because of the increased energy content in higher quality steam it is important to maintain the highest possible steam quality at the injection sandface. The effectiveness of a steaming operation without a measure of steam quality downhole close to the point of injection would be difficult to determine. Therefore, a need exists for the remote sensing of steam quality.

Lee, D.O.; Montoya, P.C.; Muir, J.F.; Wayland, J.R. Jr.

1985-06-19T23:59:59.000Z

269

Waste Management Quality Assurance Plan  

SciTech Connect (OSTI)

The WMG QAP is an integral part of a management system designed to ensure that WMG activities are planned, performed, documented, and verified in a manner that assures a quality product. A quality product is one that meets all waste acceptance criteria, conforms to all permit and regulatory requirements, and is accepted at the offsite treatment, storage, and disposal facility. In addition to internal processes, this QA Plan identifies WMG processes providing oversight and assurance to line management that waste is managed according to all federal, state, and local requirements for waste generator areas. A variety of quality assurance activities are integral to managing waste. These QA functions have been identified in the relevant procedures and in subsequent sections of this plan. The WMG QAP defines the requirements of the WMG quality assurance program. These requirements are derived from Department of Energy (DOE) Order 414.1C, Quality Assurance, Contractor Requirements Document, the LBNL Operating and Assurance Program Plan (OAP), and other applicable environmental compliance documents. The QAP and all associated WMG policies and procedures are periodically reviewed and revised, as necessary, to implement corrective actions, and to reflect changes that have occurred in regulations, requirements, or practices as a result of feedback on work performed or lessons learned from other organizations. The provisions of this QAP and its implementing documents apply to quality-affecting activities performed by the WMG; WMG personnel, contractors, and vendors; and personnel from other associated LBNL organizations, except where such contractors, vendors, or organizations are governed by their own WMG-approved QA programs.

Waste Management Group

2006-08-14T23:59:59.000Z

270

BURN CALORIES FREE LISTEN TO THE BIRDS CHECK OUT THE SCENERY MEET FRIENDS REDUCE YOUR CARBON FOOTPRINT FRESH AIR TAKE SHORT-CUTS FEEL THE BREEZE DISCOVER CAMPUS MAKE YOUR OWN ROUTE BURN CALORIES READ A BOOK LISTEN TO THE BIRDS CHECK OUT THE SCENERY  

E-Print Network [OSTI]

A BOOK LISTEN TO THE BIRDS CHECK OUT THE SCENERY MEET FRIENDS REDUCE YOUR CARBON FOOTPRINT FRESH AIR BURN CALORIES FREE LISTEN TO THE BIRDS CHECK OUT THE SCENERY MEET FRIENDS REDUCE YOUR CARBON FOOTPRINT FRESH AIR CALORIES FREE LISTEN TO THE BIRDS CHECK OUT THE SCENERY MEET FRIENDS RE- DUCE YOUR CARBON FOOTPRINT FRESH

Weiblen, George D

271

Society for Quality Fellow  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

based on their pre-eminence in technology, theory, education, or the application or management of quality control. ASQ Fellows represent diverse industries on a global scale....

272

Bringing Automated Model Checking to PLC Program Development - A CERN Case Study  

E-Print Network [OSTI]

Verification of critical software is a high priority but a challenging task for industrial control systems. Model checking appears to be an appropriate approach for this purpose. However, this technique is not widely used in industry yet, due to some obstacles. The main obstacles encountered when trying to apply formal verification techniques at industrial installations are the difficulty of creating models out of PLC programs and defining formally the specification requirements. In addition, models produced out of real-life programs have a huge state space, thus preventing the verification due to performance issues. Our work at CERN (European Organization for Nuclear Research) focuses on developing efficient automatic verification methods for industrial critical installations based on PLC (Programmable Logic Controller) control systems. In this paper, we present a tool generating automatically formal models out of PLC code. The tool implements a general methodology which can support several input languages, ...

Fernandez Adiego, B; Tournier, J-C; Blanco Vinuela, E; Gonzalez Suarez, V M

2014-01-01T23:59:59.000Z

273

Air Quality Chapter Outline  

E-Print Network [OSTI]

Chapter 30 Air Quality Chapter Outline 1 Overview 2 1.1 Hazards / Impacts 2 1.2 Exposure Sources 3 Manual Chapter 30: Air Quality 7 References 20 8 Implementation 21 9 Ownership 22 1 Overview SLAC operations produce a wide range of air emissions. Sources of emissions include standard equipment

Wechsler, Risa H.

274

GPA CALCULATION GPA = QUALITY POINTS DIVIDED BY QUALITY HOURS  

E-Print Network [OSTI]

. THIS IS THE TOTAL QUALITY POINTS THAT YOU THINK YOU WILL EARN THIS SEMESTER. TO PLAY WHAT IFGPA CALCULATION WORKSHEET GPA = QUALITY POINTS DIVIDED BY QUALITY HOURS #1 QUALITY HOURS (THROUGH LAST TERM) = __________ #2 QUALITY POINTS (THROUGH LAST TERM) = __________ #3 QUALTIY HOURS CURRENTLY

Lawrence, Rick L.

275

The impact of ciminal background checks on the selection of school volunteers as reported by human resource professionals of selected Texas public school districts  

E-Print Network [OSTI]

............................................................... 38 Administrative Issues With Criminal History Background Checks on Volunteers............................... 40 x TABLE OF CONTENTS (continued) CHAPTER Page Respondent Superior, Sovereign Immunity, and the Scope of Employment...

Smith, Richard Kimball

2005-08-29T23:59:59.000Z

276

A Case Study on Specifying Quality Requirements Using a Quality Model  

E-Print Network [OSTI]

at Siemens in which we compare the requirements resulting from apply- ing our quality model have to be transformed into useful and appropriate requirements. In this paper, we evaluate a quality study at Siemens the existing specification of a traffic control system and compare it to a new

Wagner, Stefan

277

Improving the Quality of Texas Beef In the early 1990s, the National Beef Quality Audit  

E-Print Network [OSTI]

of cattle. Analysis of responses representing 98,000 head of cattle indicated a potential increase in net and quantified the quality defects that hurt consumer confidence and led to reduced demand and sales for all beef economic uncertainty. Extension's Response Created in 1993 as a result of the National Beef Quality Audit

278

Quality engineering as a profession.  

SciTech Connect (OSTI)

Over the course of time, the profession of quality engineering has witnessed significant change, from its original emphasis on quality control and inspection to a more contemporary focus on upholding quality processes throughout the organization and its product realization activities. This paper describes the profession of quality engineering, exploring how today's quality engineers and quality professionals are certified individuals committed to upholding quality processes and principles while working with different dimensions of product development. It also discusses the future of the quality engineering profession and the future of the quality movement as a whole.

Kolb, Rachel R.; Hoover, Marcey L.

2012-12-01T23:59:59.000Z

279

Checking Herbrand Equalities and Beyond Markus MullerOlm 1 , Oliver Ruthing 1 , and Helmut Seidl 2  

E-Print Network [OSTI]

Checking Herbrand Equalities and Beyond Markus MË?uller­Olm 1 , Oliver RË?uthing 1 , and Helmut Seidl Markus MË?uller­Olm, Oliver RË?uthing, and Helmut Seidl This deficiency is still present in the algorithm

Müller-Olm, Markus

280

Renewing Music Library Materials Online Most checked out Music Library materials can be renewed through PantherCat  

E-Print Network [OSTI]

Renewing Music Library Materials Online Most checked out Music Library materials can be renewed://www.uwm.edu/Libraries/Music/about.html#loan. Please Note: Item loan periods are renewed from the date you renew them. If you renew an item one day full loan period you must wait to renew the item until its original due date. What can and cannot

Saldin, Dilano

Note: This page contains sample records for the topic "quality check results" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Donate or sell your furniture, electronics, etc. Check out these helpful resources to recycle your unwanted items  

E-Print Network [OSTI]

Donate or sell your furniture, electronics, etc. · Check out these helpful resources to recycle's EcoDirectory can help you answer your recycling and reuse questions. (http, debris bins or place curbside. The Alameda County Computer Resource Center picks up anything with a plug

Alvarez-Cohen, Lisa

282

REDUCED-COMPLEXITY DECODING FOR CONCATENATED CODES BASED ON RECTANGULAR PARITY-CHECK CODES AND TURBO CODES  

E-Print Network [OSTI]

AND TURBO CODES John M. Shea and Tan F. Wong University of Florida Department of Electrical and Computer-check code (RPCC) with a turbo code. These concatenated codes are referred to as RPCC+turbo codes. RPCC+turbo codes have been shown to significantly outperform turbo codes in several scenarios [1],[2]. One

Wong, Tan F.

283

Check WorkNet often for job vacancies or rely on the e-mail feature to  

E-Print Network [OSTI]

Check WorkNet often for job vacancies or rely on the e-mail feature to receive a message when a job Bowling Green, OH 43403-0150 419-372-2865 Review Postings Carefully All job vacancies include a job. Access Job Vacancies Using WorkNet Log-in to your MyBGSU portal. Scroll down to Misc Services, located

Moore, Paul A.

284

g:\\self care\\cold sore throat cough allergy 8/08 SELF CARE CHECK LIST FOR COLD, SORE  

E-Print Network [OSTI]

g:\\self care\\cold sore throat cough allergy 8/08 SELF CARE CHECK LIST FOR COLD, SORE THROAT, COUGH worse? NO YES Do you have chest pain, wheezing or any difficulty with breathing? NO YES Are you coughing, hacky cough? Expectorant (guaifenesin/Robitussin) Cough suppressant (dextromethorphan/ DM) Do you have

Suzuki, Masatsugu

285

Design and implementation of a high data rate wireless system using Low-Density Parity-Check codes  

E-Print Network [OSTI]

The aim of this research is to design a high performance, high data rate, low cost wireless communications system for use in a typical outdoor environment. The use of Low-Density Parity-check (LDPC) codes as the forward error correction scheme...

Bhatt, Tejas Maheshbhai

2000-01-01T23:59:59.000Z

286

Software quality assurance handbook  

SciTech Connect (OSTI)

There are two important reasons for Software Quality Assurance (SQA) at Allied-Signal Inc., Kansas City Division (KCD): First, the benefits from SQA make good business sense. Second, the Department of Energy has requested SQA. This handbook is one of the first steps in a plant-wide implementation of Software Quality Assurance at KCD. The handbook has two main purposes. The first is to provide information that you will need to perform software quality assurance activities. The second is to provide a common thread to unify the approach to SQA at KCD. 2 figs.

Not Available

1990-09-01T23:59:59.000Z

287

Prescreening Illumina Data Results in High-Quality Genome Polishing  

SciTech Connect (OSTI)

Cliff Han of the DOE Joint Genome Institute at Los Alamos National Laboratory, talks about modifying their bacterial genome sequencing process to accommodate new sequencing technologies at the "Sequencing, Finishing, Analysis in the Future" meeting in Santa Fe, NM

Han, Cliff [DOE Joint Genome Institute at Los Alamos National Laboratory

2009-05-28T23:59:59.000Z

288

air quality resulting: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

dynamics in the South Coast Air Basin of California. It has also been modified to model pollution in South Korea, Mexico Manohar, Rajit First Page Previous Page 1 2 3 4 5 6 7 8 9...

289

Results of the 2007 B100 Quality Survey  

SciTech Connect (OSTI)

In a 2007 analysis of samples from 52% of U.S. biodiesel (B100) producers, 90% met ASTM and other specifications for critical engine performance properties and for elements that harm emission controls.

Alleman, T. L.; McCormick, R. L.

2008-03-01T23:59:59.000Z

290

Water Quality Criteria Introduction ....................................................................................................................................798  

E-Print Network [OSTI]

APPENDIX G Water Quality Criteria CONTENTS Introduction ....................................................................................................................................798 EPA's Water Quality Criteria and Standards Plan -- Priorities for the Future............................798 Compilation of Recommended Water Quality Criteria and EPA's Process for Deriving New

Pitt, Robert E.

291

Water Quality Control (Texas)  

Broader source: Energy.gov [DOE]

The policy of the state of Texas is to promote the quality of the state's water by regulating existing industries, taking into consideration the economic development of the state, and by...

292

Quality Jobs Program (Louisiana)  

Broader source: Energy.gov [DOE]

The Quality Jobs Program provides a cash rebate to companies that create well-paid jobs and promote economic development. Benefits include a 5-6% cash rebate of annual gross payroll for new,...

293

Water Quality (Oklahoma)  

Broader source: Energy.gov [DOE]

The Water Quality Act establishes cumulative remedies to prevent, abate and control the pollution of the waters of the state. The act establishes responsibilities of the Oklahoma Department of...

294

Power Quality Implications  

E-Print Network [OSTI]

Electric utilities in the United States spend in excess of one billion dollars annually to maintain or improve the quality of electric power supplied to their customers. Yet, an increasing and alarming number of complaints are being voiced...

Hilson, D.

295

Hydrogen Fuel Quality (Presentation)  

SciTech Connect (OSTI)

Jim Ohi of NREL's presentation on Hydrogen Fuel Quality at the 2007 DOE Hydrogen Program Annual Merit Review and Peer Evaluation on May 15-18, 2007 in Arlington, Virginia.

Ohi, J.

2007-05-17T23:59:59.000Z

296

Evaluating Cotton Seed Quality  

E-Print Network [OSTI]

High-quality cotton seed is critical for establishing good stands. Over the last several years, producers have scrutinized costs and benefits of numerous new cotton varieties. With the increase in cost of most current cotton varieties and the use...

Boman, Randy

2005-10-05T23:59:59.000Z

297

Software Quality Assurance  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

DOE N 251.40, dated 5/3/01, extends this directive until 12/31/01. To define requirements and responsibilities for software quality assurance (SQA) within the Department of Energy (DOE). Does not cancel other directives.

2000-10-02T23:59:59.000Z

298

Software Quality Assurance  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To define requirements and responsibilities for software quality assurance (SQA) within the Department of Energy (DOE). DOE N 251.40, dated 5/3/01, extends this directive until 12/31/01.

2000-10-02T23:59:59.000Z

299

Marketing Quality Energy Awareness  

E-Print Network [OSTI]

employee participation that improved energy efficiency 15%. The plan was successfully introduced on a test basis in two manufacturing locations and now is a part of overall operations. The marketing concepts aided in determining who was the customer...MARKETING QUALITY ENERGY AWARENESS LONITA J. FORTIER Engineering Technologist 3M Company Saint Paul, Minnesota ABSTRACT Marketing and quality concepts were utilized in developing an employee awareness plan to facilitate long term...

Fortier, L. J.

300

Quality Management and Job Quality: How the ISO 9001 Standard forQuality Management Systems Affects Employees and Employers  

E-Print Network [OSTI]

disorders and workplace Quality Management and Job Qualitycharacteristics, Total Quality Management, and financialfirms with effective Quality Management and Job Quality TQM

Levine, David I.; Toffel, Michael W.

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "quality check results" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Sensitivity of health risk estimates to air quality adjustment procedure  

SciTech Connect (OSTI)

This letter is a summary of risk results associated with exposure estimates using two-parameter Weibull and quadratic air quality adjustment procedures (AQAPs). New exposure estimates were developed for children and child-occurrences, six urban areas, and five alternative air quality scenarios. In all cases, the Weibull and quadratic results are compared to previous results, which are based on a proportional AQAP.

Whitfield, R.G.

1997-06-30T23:59:59.000Z

302

Surface Water Quality Standards (Nebraska)  

Broader source: Energy.gov [DOE]

These regulations, promulgated by the Department of Environmental Quality, contain surface water quality standards, stream classifications, discussion of lakes and impounded basins, and water...

303

Water Quality Control Act (Tennessee)  

Broader source: Energy.gov [DOE]

The Water Quality Control Act (WQCA) establishes the water pollution control program. The WQCA identifies the responsibilities and extent of authority for the Commissioner of the Water Quality...

304

Water Quality Standards Implementation (Oklahoma)  

Broader source: Energy.gov [DOE]

The Oklahoma Department of Environmental Quality regulates Oklahoma's Water Quality Standards. The law states the requirements and standards for point source discharges. It also establishes...

305

Quality Jobs Investment Program (Oklahoma)  

Broader source: Energy.gov [DOE]

The Oklahoma Quality Jobs Program allows qualifying businesses which are creating new quality jobs to receive a special incentive to locate or expand in Oklahoma.

306

Nebraska Air Quality Regulations (Nebraska)  

Broader source: Energy.gov [DOE]

These regulations, promulgated by the Department of Environmental Quality, contain provisions pertaining to ambient air quality standards, pollution source operating permits, emissions reporting,...

307

Water Quality Trading Program (Ohio)  

Broader source: Energy.gov [DOE]

Water quality trading is a tool for achieving water quality improvements. Under the right circumstances, trading has the potential to yield both environmental and economic benefits, while...

308

Ambient Air Quality Standards (Iowa)  

Broader source: Energy.gov [DOE]

These regulations set statewide ambient air quality standards for various contaminants. The state code follows the regulations set forth in the National Primary and Secondary Ambient Air Quality...

309

Broadleaf Timber Quality Dr Jason Hubert  

E-Print Network [OSTI]

Quality The link between flushing and quality in ash #12;29 April 20088 Broadleaf Timber Quality Romanian

310

SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM | Department of...  

Broader source: Energy.gov (indexed) [DOE]

SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM System Maintenance Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM More...

311

SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM | Department of...  

Broader source: Energy.gov (indexed) [DOE]

PROGRAM SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM Training Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM More Documents & Publications Quality Assurance Checklist...

312

Home Fire Safety Inspection Checklist A fire can occur in any part of your home. Use this checklist to make a safety check of your house or  

E-Print Network [OSTI]

to make a safety check of your house or apartment. Review it with everyone in the house or apartment. Ask ash trays throughout the house? o Do you check for smoldering cigarette butts in the furniture alarm(s) every month? o Do you replace the battery of your battery operated smoke alarm every year? #12

Marsh, David

313

Steps for Confirming a Vendor's Legitimacy 1. Check a vendor's legitimacy begin by calling the vendor's phone number listed to see if they  

E-Print Network [OSTI]

Steps for Confirming a Vendor's Legitimacy 1. Check a vendor's legitimacy begin by calling the vendor's phone number listed to see if they answer as the business 2. Check online with 3 different telephone sources to see if the phone number is listed for the vendor with the corresponding address 3

314

9 QUALITY ASSURANCE AND QUALITY CONTROL 9.1 Introduction  

E-Print Network [OSTI]

for their intended use. A quality system is a management system that describes the elements necessary to plan in the use of radioactive materials. There are self-imposed internal quality management systems (e.g., DOE an organization-specific quality system, there is no need to develop new quality management systems, to the extent

315

Quality assurance for gamma knives  

SciTech Connect (OSTI)

This report describes and summarizes the results of a quality assurance (QA) study of the Gamma Knife, a nuclear medical device used for the gamma irradiation of intracranial lesions. Focus was on the physical aspects of QA and did not address issues that are essentially medical, such as patient selection or prescription of dose. A risk-based QA assessment approach was used. Sample programs for quality control and assurance are included. The use of the Gamma Knife was found to conform to existing standards and guidelines concerning radiation safety and quality control of external beam therapies (shielding, safety reviews, radiation surveys, interlock systems, exposure monitoring, good medical physics practices, etc.) and to be compliant with NRC teletherapy regulations. There are, however, current practices for the Gamma Knife not covered by existing, formalized regulations, standards, or guidelines. These practices have been adopted by Gamma Knife users and continue to be developed with further experience. Some of these have appeared in publications or presentations and are slowly finding their way into recommendations of professional organizations.

Jones, E.D.; Banks, W.W.; Fischer, L.E. [Lawrence Livermore National Lab., CA (United States)

1995-09-01T23:59:59.000Z

316

MJ no more: Using Concurrent Wikipedia Edit Spikes with Social Network Plausibility Checks for Breaking News Detection  

E-Print Network [OSTI]

We have developed an application called Wikipedia Live Monitor that monitors article edits on different language versions of Wikipedia, as they happen in realtime. Wikipedia articles in different languages are highly interlinked. For example, the English article en:2013_Russian_meteor_event on the topic of the February 15 meteoroid that exploded over the region of Chelyabinsk Oblast, Russia, is interlinked with the Russian article on the same topic. As we monitor multiple language versions of Wikipedia in parallel, we can exploit this fact to detect concurrent edit spikes of Wikipedia articles covering the same topics, both in only one, and in different languages. We treat such concurrent edit spikes as signals for potential breaking news events, whose plausibility we then check with full-text cross-language searches on multiple social networks. Unlike the reverse approach of monitoring social networks first, and potentially checking plausibility on Wikipedia second, the approach proposed in this paper has th...

Steiner, Thomas; Summers, Ed

2013-01-01T23:59:59.000Z

317

Precursor systems analyses of automated highway systems. Activity area C. Automated check-out. Final report, September 1993-November 1994  

SciTech Connect (OSTI)

The activity evaluates potential automatic-to-manual transition scenarios in terms of relative feasibility, safety, cost, and social implications. The check-out alternatives range from minimal testing of the operator and the vehicle to extensive testing of the operator and vehicle. The vehicle functions analysis presents a summary of functions that are critical to safe manual operation and proposes several options for validation. Two possible check-out processes are discussed, one intended for AHS lanes dedicated to automated traffic, and one intended for mixed mode lanes in which AHS and non-AHS vehicles are traveling. The transition to manual control will involve preparing the driver to resume manual operation prior to release of vehicle functions. Proposed tasks which could be used to determine that the driver is ready to receive control of the automated vehicle are examined.

Mangarelli, F.; Cochran, A.; Craig, D.; Michael, B.; Halseth, M.

1995-05-01T23:59:59.000Z

318

Job quality in Europe  

E-Print Network [OSTI]

flexibility—can also lead to enhanced job quality (Bredgaard and Larsen, 2006; CEC, 2007b), for example, in the form of autonomy and job enlargement. So far, it is only in Finland and Sweden that the Commission finds evidence of such quality workplaces being... . The response rates was 0.48 with most countries, recording rates close to this average, although eight countries—Belgium, Finland, Luxembourg, the Netherlands, Poland, Slovenia, Switzerland and the UK—recorded rates below 0.4 (Parent-Thirion et al., 2007: 95...

Burchell, Brendan J.; Smith, Mark; Fagan, Colette; O’Brien, Catherine

2008-01-01T23:59:59.000Z

319

Air quality and thermal comfort in office buildings: Results of a large indoor environmental quality survey  

E-Print Network [OSTI]

ambient Proceedings of Healthy Buildings 2006, Lisbon,Vol.and operation of healthy buildings Introduction Indoor airdatabase Proceedings of Healthy Buildings 2006, Lisbon,Vol.

Huizenga, C; Abbaszadeh, S.; Zagreus, Leah; Arens, Edward A

2006-01-01T23:59:59.000Z

320

Cytometer LASER (nm) Detector range Fluorochrome Names check LSRII-A UV 355 A 505-550 Indo-1 (Blue)  

E-Print Network [OSTI]

Cytometer LASER (nm) Detector range Fluorochrome Names check LSRII-A UV 355 A 505-550 Indo-1 (Blue) B 420-460 Live Dead UV Blue Alexa 350 DAPI Indo-1(Violet) Hoechst 33342 C - empty Violet 405 A 505-550 Pac. Orange V500 VioGreen BVio 510 Viability Dye eF506 Alexa 430 Sapphire B 420-460 Pac. Blue eF450 V

Oliver, Douglas L.

Note: This page contains sample records for the topic "quality check results" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Office of Quality Management  

Broader source: Energy.gov [DOE]

The Office of Quality Management develops and interprets Government-wide policies and procedures and conducts training to ensure the accurate identification of information and documents that must be classified or controlled under statute or Executive order to protect the national security and controlled unclassified Official Use Only information for the effective operation of the Government.

322

Quality Assurance Program Guide  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Guide provides information on principles, requirements, and practices used to establish and implement an effective Quality Assurance Program. Cancels DOE G 414.1-2A, DOE G 414.1-3 and DOE G 414.4-5. Admin Chg 1, dated 9-27-11. Admin Chg 2, dated 5-8-13.

2011-08-16T23:59:59.000Z

323

Quality Assurance Program Guide  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The directive provides guidance for DOE elements and contractors in developing and implementing an effective Quality Assurance Program. Cancels DOE G 414.1-2A, DOE G 414.1-3 and DOE G 414.1-5. Superseded by Admin Chg 1, 9-27-11.

2011-08-16T23:59:59.000Z

324

Quality Assurance Program Guide  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Guide provides information on principles, requirements, and practices used to establish and implement an effective Quality Assurance Program. Cancels DOE G 414.1-2A, DOE G 414.1-3 and DOE G 414.1-5. Admin Chg 1, dated 9-27-11. Admin Chg 2, dated 5-8-13.

2011-08-16T23:59:59.000Z

325

Quality Counts Exhibitor Card  

E-Print Network [OSTI]

This exhibitor card identifies young livestock exhibitors as participants in the Quality Counts! program. The card is printed with a leather-style background on heavy card stock. It features the 4-H clover and the FFA logo, as well as the logo...

Chilek, Kevin; Gregory, Elizabeth

2004-01-27T23:59:59.000Z

326

RUNWAY OPERATIONAL QUALITY ASSURANCE  

E-Print Network [OSTI]

RUNWAY OPERATIONAL QUALITY ASSURANCE MELANIE BAKER, DARIC MEGERSA & ALFONSO PANLILIO Sponsors: Dr Vortex Separation Rule, for a homogeneous fleet mix, is determined by the time between arriving aircraft Occupancy (SRO) rule, for a non- homogeneous fleet mix, MTC= 3600/ [ROT] [ROT]= = i (pi *ROTi) ROT (in sec

327

GRADE NUMBER OF CREDITS FACTOR QUALITY POINTS HOW TO COMPUTE A GRADE POINT AVERAGE  

E-Print Network [OSTI]

.00 = __________ TOTALS: _________ __________ CREDITS QUALITY PTS. Divide total credits into total quality pointsGRADE NUMBER OF CREDITS FACTOR QUALITY POINTS HOW TO COMPUTE A GRADE POINT AVERAGE A _________ x 4 and the result is the grade point average (GPA). QUALITY PTS. = GPA ____________ = CREDITS

Massachusetts at Amherst, University of

328

776 IEEE TRANSACTIONS ON COMPUTER-AIDED DESIGN OF INTEGRATED CIRCUITS AND SYSTEMS, VOL. 16, NO. 7, JULY 1997 [4] M. Diaz, P. Azema, and J. M. Ayache, "Unified design of self-checking  

E-Print Network [OSTI]

-checking sequential circuits," in Proc. IEEE Int. Test Conf., 1991, pp. 283­291. [10] I. Jansch and B. Courtois

Lin, Youn-Long Steve

329

Chemical analysis quality assurance at the ICPP  

SciTech Connect (OSTI)

This document discusses the chemical analysis quality assurance program at the ICPP which involves records management, analytical methods quality control, analysis procedures and training and qualification. Since 1979, the major portion of the quality assurance program has been implemented on a central analytical computer system. The individual features provided by the system are storage, retrieval, and search capabilities over all general request and sample analysis information, automatic method selection for all process streams, automation of all method calculations, automatic assignment of bias and precision estimates at all analysis levels, with-method-use requalification, untrained or unqualified analyst method lockout, statistical testing of all process stream results for replicate agreement, automatic testing of process results against pre- established operating, safety, or failure limits at varying confidence levels, and automatic transfer and report of all analysis data plus all statistical testing to the Production Department.

Hand, R.L.

1990-01-01T23:59:59.000Z

330

Chemical analysis quality assurance at the ICPP  

SciTech Connect (OSTI)

This document discusses the chemical analysis quality assurance program at the ICPP which involves records management, analytical methods quality control, analysis procedures and training and qualification. Since 1979, the major portion of the quality assurance program has been implemented on a central analytical computer system. The individual features provided by the system are storage, retrieval, and search capabilities over all general request and sample analysis information, automatic method selection for all process streams, automation of all method calculations, automatic assignment of bias and precision estimates at all analysis levels, with-method-use requalification, untrained or unqualified analyst method lockout, statistical testing of all process stream results for replicate agreement, automatic testing of process results against pre- established operating, safety, or failure limits at varying confidence levels, and automatic transfer and report of all analysis data plus all statistical testing to the Production Department.

Hand, R.L.

1990-12-31T23:59:59.000Z

331

The German quality system for waste repositories  

SciTech Connect (OSTI)

The Bundesamt fuer Strahlenschutz (BfS)--Federal Office for Radiation protection--has to guarantee that the requirements resulting from different regulations concerning planning, design, construction, operation and decommissioning of a waste repository are fulfilled. In addition, the results of the safety assessments lead to nuclear-specific requirements on the design of the plant as well as to requirements on the radioactive waste packages intended to be disposed of. Therefore, the implementation of a quality assurance (QA) and quality control (QC) system is an essential task in order to ensure that the designed quality is achieved so that the necessary precaution against damage is taken. In this paper, a detailed description of QA and QC to be applied to the planned Konrad repository as well as the basic principles and the present status of the waste package QC are indicated and discussed.

Beckmerhagen, I.; Berg, H.P.; Brennecke, P. [Bundesamt fuer Strahlenschutz, Saltzgitter (Germany)

1993-12-31T23:59:59.000Z

332

DOE CALiPER Program, Report 20.1 Subjective Evaluation of Beam Quality, Shadow Quality, and Color Quality for LED PAR38 Lamps  

SciTech Connect (OSTI)

This report focuses on human-evaluated characteristics, including beam quality, shadow quality, and color quality. Using a questionnaire that included rank ordering, opinions on 27 of the Report 20 PAR38 lamps were gathered during a demonstration event for members of the local Illuminating Engineering Society (IES) chapter. This was not a rigorous scientific experiment, and the data should not be extrapolated beyond the scope of the demonstration. The results suggest that many of the LED products compared favorably to halogen PAR38 benchmarks in all attributes considered. LED lamps using a single-emitter design were generally preferred for their beam quality and shadow quality, and the IES members ranking of color quality did not always match the rank according to the color rendering index (CRI).

Royer, Michael P.; Poplawski, Michael E.; Miller, Naomi J.

2013-10-01T23:59:59.000Z

333

Improving Stormwater Quality  

E-Print Network [OSTI]

of water resources. Stormwater, when produced by rain or snowmelt flowing over the land, captures debris, chemicals, hazardous wastes, and/or sediment. These contaminants then make their way to drainage systems that flow directly into rivers, lakes..., wetlands, or bays. The polluted stormwa- ter runoff can affect the health of plants, fish, animals, and people, as well as reduce the recreational value of water resources. Urbanization also has a major impact on the quality of local streams because...

Garcia, Raul

2005-01-01T23:59:59.000Z

334

East Bank District Heating-to-Cooling Conversion Plan Check the date your building's cooling system is scheduled to be on.  

E-Print Network [OSTI]

East Bank District Heating-to-Cooling Conversion Plan Check the date your building's cooling system Coal Storage Building 39 NA Cooke Hall 56 Donhowe Building 044 East Gateway District Steam Distr. 199

Webb, Peter

335

Surface Water Quality Standards (Kansas)  

Broader source: Energy.gov [DOE]

This act states regulations for the quality of surface water in the state. It also states designated uses of classified surface waters, surface water quality criteria and an antidegradation policy...

336

Tennessee Air Quality Act (Tennessee)  

Broader source: Energy.gov [DOE]

The Tennessee Air Quality Act (AQA) delegates the power to maintain air quality in the State to the Department of Environment and Conservation. Under the Department of the Environment and...

337

Quality Assurance Exchange, December 2005  

Broader source: Energy.gov (indexed) [DOE]

the EM-HQ Quality Assur- ance Program Plan (QAPP), the benefits of having a DOE Order on QA, and the EM Quality Assurance goals. Describe your role as QA Administrator for...

338

2011 Quality Council Annual Report  

Broader source: Energy.gov [DOE]

DEPARTMENT OF ENERGY QUALITY COUNCIL ANNUAL REPORT For Calendar Year 2011 Office of Health Safety and Security

339

Quality Management and Job Quality: How the ISO 9001 Standard forQuality Management Systems Affects Employees and Employers  

E-Print Network [OSTI]

of IS0 9000 quality management systems on manufacturing.Standard for Quality Management Systems Affects Employeeshow the ISO 9001 Quality Management System standard affects

Levine, David I.; Toffel, Michael W.

2008-01-01T23:59:59.000Z

340

QUALITY MANAGEMENT AGENDA General Agenda  

E-Print Network [OSTI]

1 QUALITY MANAGEMENT AGENDA General Agenda A week before study commences, the following matters a meeting for the following purposes: 1. Read the report that is related to quality management for the previous term. 2. Conduct a general review of the procedures of quality management and reinforcement

Note: This page contains sample records for the topic "quality check results" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Texas Surface Water Quality Standards  

E-Print Network [OSTI]

1 Texas Surface Water Quality Standards 30 TAC Chapter 307 Lori Hamilton Water Quality Standards of the water quality standards for a water body will be conducted Types of UAAs Aquatic Life Use (ALU) UAAs 2 procedures in conjunction with Standards revision Before Conducting a UAA Coordinate with your TCEQ project

342

Annual Monitoring Results A REPORT OF THE REGIONAL MONITORING PROGRAM  

E-Print Network [OSTI]

Grainsize 33 Total Organic Carbon (TOC) and Total Nitrogen (TN)33 Trace Metals34 Trace Organics34 Quality Assurance / Quality Control (QA/QC) 37 QA/QC of Percent Solids37 QA/QC of Grain Size 37 QA/QC of TotalAnnual Monitoring Results 2012 A REPORT OF THE REGIONAL MONITORING PROGRAM FOR WATER QUALITY

343

2008 B20 Survey Results (Presentation)  

SciTech Connect (OSTI)

Describes results of a sample survey of the quality of B20, a biodiesel blend, collected from U.S. public pumps and fleets as part of a joint effort by NREL, the NBB, and engine manufacturers.

Alleman, T. L.; McCormick, R. L.

2009-02-02T23:59:59.000Z

344

DOE Challenge Home Recommended Quality Management Provisions...  

Broader source: Energy.gov (indexed) [DOE]

Recommended Quality Management Provisions DOE Challenge Home Recommended Quality Management Provisions DOE Challenge Home Recommended Quality Management Provisions. qm6-14-13.pdf...

345

Perceptual quality assessment for compressed video  

E-Print Network [OSTI]

Overview of Video Quality Assessment . . . . . . . . . . . .2.3.1 Subjective Video Quality Assessment . . . . . . . .2.3.2 Objective Video Quality Assessment . . . . . . . . .

Yang, Kai-Chieh

2007-01-01T23:59:59.000Z

346

Analytical laboratory quality audits  

SciTech Connect (OSTI)

Analytical Laboratory Quality Audits are designed to improve laboratory performance. The success of the audit, as for many activities, is based on adequate preparation, precise performance, well documented and insightful reporting, and productive follow-up. Adequate preparation starts with definition of the purpose, scope, and authority for the audit and the primary standards against which the laboratory quality program will be tested. The scope and technical processes involved lead to determining the needed audit team resources. Contact is made with the auditee and a formal audit plan is developed, approved and sent to the auditee laboratory management. Review of the auditee's quality manual, key procedures and historical information during preparation leads to better checklist development and more efficient and effective use of the limited time for data gathering during the audit itself. The audit begins with the opening meeting that sets the stage for the interactions between the audit team and the laboratory staff. Arrangements are worked out for the necessary interviews and examination of processes and records. The information developed during the audit is recorded on the checklists. Laboratory management is kept informed of issues during the audit so there are no surprises at the closing meeting. The audit report documents whether the management control systems are effective. In addition to findings of nonconformance, positive reinforcement of exemplary practices provides balance and fairness. Audit closure begins with receipt and evaluation of proposed corrective actions from the nonconformances identified in the audit report. After corrective actions are accepted, their implementation is verified. Upon closure of the corrective actions, the audit is officially closed.

Kelley, William D.

2001-06-11T23:59:59.000Z

347

School quality and wages  

E-Print Network [OSTI]

to a College Degree Over a High School Degree...........................................................................................133 1 CHAPTER I#0;#3;#0;#3; #0;#3;#0;#3; INTRODUCTION Introduction During the 2000-2001 school year, $738 billion... that we believe that spending matters and the presumption must be that extra spending buys something of value, i.e., higher quality schools.3 #0;#3;#0;#3;#0;#3;#0;#3;#0;#3;#0;#3;#0;#3;#0;#3; This dissertation follows the style and format of the Journal...

Speakman, Robert B., Jr.

2007-04-25T23:59:59.000Z

348

Underlying Quality Principles  

Broader source: Energy.gov [DOE]

These principles are consistent with Integrated Safety Management Policy, P 450.4A and support ISM implementation. 1. Define Policies and Objectives--Ensure they are Understood and Accepted. Management must set expectations for the organization as a whole before employees can do their jobs, satisfy their customers, and strive to improve the quality of their work. This is accomplished by developing and implementing specific policies and objectives that reflect the operating philosophy of the facility's management. Once these policies and objectives have been established, all managers must take the necessary actions to ensure that each employee shares their vision of the organization's purpose.

349

Safeguarding indoor air quality  

SciTech Connect (OSTI)

California has created and implemented the first state program devoted exclusively to the investigation of nonindustrial indoor air quality. The program is responsible for promoting and conducting research on the determining factors of healthful indoor environments and is structured to obtain information about emission sources, ventilation effects, indoor concentrations, human activity patterns, exposures, health risks, control measures and public policy options. Data are gathered by a variety of methods, including research conducted by staff members, review of the available scientific literature, participation in technical meetings, contractual agreements with outside agencies, cooperative research projects with other groups and consultation with experts. 23 references, 1 figure, 1 table.

Sexton, K.; Wesolowski, J.J.

1985-01-01T23:59:59.000Z

350

ARM - Data Quality Program  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation InInformation InExplosionAnnouncements Media Contact Hanna Goss7, 2015Quality Program DQ

351

Report: EM Quality Assurance  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15,2015Department of Energy onACQUISITION ANDEMEM QUALITY

352

Quality Assurance | Jefferson Lab  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest RegionatSearch Welcome to theNewsCenter forQuality Assurance Is A Key Focus

353

Section 22: Quality Assurance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administrationcontroller systemsBi (2) Sr (2)ScienceScientistsONDelivered5 Figurem DFigure9Quality

354

Timber Properties Programme 1 Where Is The Timber Quality  

E-Print Network [OSTI]

and quality · Jason Hubert: Stem form and conversion, broadleaf breeding · Stephen Bathgate: Programming TQ impact of conversion to Continuous Cover Forestry on timber quality #12;Timber Properties Programme 7 Results · Factors associated with poorer straightness: ­ More recent plantings ­ Increased exposure

355

USHER: Improving Data Quality with Dynamic Forms  

E-Print Network [OSTI]

Abstract — Data quality is a critical problem in modern databases. Data entry forms present the first and arguably best opportunity for detecting and mitigating errors, but there has been little research into automatic methods for improving data quality at entry time. In this paper, we propose USHER, an endto-end system for form design, entry, and data quality assurance. Using previous form submissions, USHER learns a probabilistic model over the questions of the form. USHER then applies this model at every step of the data entry process to improve data quality. Before entry, it induces a form layout that captures the most important data values of a form instance as quickly as possible. During entry, it dynamically adapts the form to the values being entered, and enables real-time feedback to guide the data enterer toward their intended values. After entry, it re-asks questions that it deems likely to have been entered incorrectly. We evaluate all three components of USHER using two real-world data sets. Our results demonstrate that each component has the potential to improve data quality considerably, at a reduced cost when compared to current practice. I.

Kuang Chen; Harr Chen; Neil Conway; Joseph M. Hellerstein; Tapan S. Parikh

356

AIR QUALITY ENSEMBLE FORECAST COUPLING ARPEGE AND CHIMERE OVER WESTERN EUROPE  

E-Print Network [OSTI]

AIR QUALITY ENSEMBLE FORECAST COUPLING ARPEGE AND CHIMERE OVER WESTERN EUROPE Carvalho of the results encountered on numerical weather prediction ensemble runs has encouraged the air quality modellers' community to test the same methodology to foresee air pollutants concentrations

Menut, Laurent

357

Indoor Air Quality Assessment of the San Francisco Federal Building  

SciTech Connect (OSTI)

An assessment of the indoor air quality (IAQ) of the San Francisco Federal Building (SFFB) was conducted on May 12 and 14, 2009 at the request of the General Services Administration (GSA). The purpose of the assessment was for a general screening of IAQ parameters typically indicative of well functioning building systems. One naturally ventilated space and one mechanically ventilated space were studied. In both zones, the levels of indoor air contaminants, including CO2, CO, particulate matter, volatile organic compounds, and aldehydes, were low, relative to reference exposure levels and air quality standards for comparable office buildings. We found slightly elevated levels of volatile organic compounds (VOCs) including two compounds often found in"green" cleaning products. In addition, we found two industrial solvents at levels higher than typically seen in office buildings, but the levels were not sufficient to be of a health concern. The ventilation rates in the two study spaces were high by any standard. Ventilation rates in the building should be further investigated and adjusted to be in line with the building design. Based on our measurements, we conclude that the IAQ is satisfactory in the zone we tested, but IAQ may need to be re-checked after the ventilation rates have been lowered.

Apte, Michael; Bennett, Deborah H.; Faulkner, David; Maddalena, Randy L.; Russell, Marion L.; Spears, Michael; Sullivan, Douglas P; Trout, Amber L.

2008-07-01T23:59:59.000Z

358

LHCb RICH Online-Monitor and Data-Quality  

E-Print Network [OSTI]

The LHCb experiment at the LHC (CERN) has been optimised for high precision measurements of the beauty quark sector. Its main objective is to precisely determine and over-constrain the parameters of the CKM mixing matrix, and to search for further sources of CP violation and new physics beyond the Standard Model in rare B-decays. Efficient particle identification at high purities over a wide momentum range from around 1 to ~100GeV/c is vital to many LHCb analyses. Central to the LHCb particle identification strategy are two Ring Imaging CHerenkov (RICH) detectors which use Silica Aerogel and C4F10 and CF4 gas radiators. A rigorous quality control scheme is being developed to insure that the data recorded by the RICH detector meets the stringent requirements of the physics analyses. The talk summarises the LHCb RICH online monitoring and data-quality strategy. Multiple dedicated algorithms are deployed to detect any potential issue already during data-taking ranging from integrity checks, mis-alignments to cha...

Kerzel, U

2009-01-01T23:59:59.000Z

359

Software Quality Assurance Subcommittee : Guidelines for Requirements...  

Broader source: Energy.gov (indexed) [DOE]

Software Quality Assurance Subcommittee : Guidelines for Requirements Management Software Quality Assurance Subcommittee : Guidelines for Requirements Management Requirements...

360

SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration...  

Broader source: Energy.gov (indexed) [DOE]

SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration Management Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration Management...

Note: This page contains sample records for the topic "quality check results" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Used Fuel Disposition Campaign Preliminary Quality Assurance...  

Energy Savers [EERE]

Used Fuel Disposition Campaign Preliminary Quality Assurance Implementation Plan Used Fuel Disposition Campaign Preliminary Quality Assurance Implementation Plan The primary...

362

Managing For High-quality Hay  

E-Print Network [OSTI]

This publication highlights the factors determining hay quality and discusses fertility and water interaction, harvesting, quality losses and storage losses....

Stichler, Charles; Bade, David H.

1998-09-22T23:59:59.000Z

363

ERROR REDUCTION IN DUCT LEAKAGE TESTING THROUGH DATA CROSS-CHECKS  

SciTech Connect (OSTI)

One way to reduce uncertainty in scientific measurement is to devise a protocol in which more quantities are measured than are absolutely required, so that the result is over constrained. This report develops a method for so combining data from two different tests for air leakage in residential duct systems. An algorithm, which depends on the uncertainty estimates for the measured quantities, optimizes the use of the excess data. In many cases it can significantly reduce the error bar on at least one of the two measured duct leakage rates (supply or return), and it provides a rational method of reconciling any conflicting results from the two leakage tests.

ANDREWS, J.W.

1998-12-31T23:59:59.000Z

364

Quality in Saudi advertising design.  

E-Print Network [OSTI]

??This research investigates reasons for differences in quality between advertisements created by local and international advertising agencies operating in Saudi Arabia. It focuses on the… (more)

Alzahrani, Mojib Othman

2012-01-01T23:59:59.000Z

365

Quality Assurance Exchange, June 2006  

Broader source: Energy.gov (indexed) [DOE]

EXCELLENCE Submitted by Julianna Gallego, Strategic Petroleum Reserve The ANSIISOASQ Q9001-2000 Figure 1. Model of process-based quality management system Meeting the...

366

Quality Assurance Exchange, January 2007  

Broader source: Energy.gov (indexed) [DOE]

third article of this series (Quality Assurance Exchange June, volume 2, Issue 2), the bulk of the comments derived from the factual accuracy review should be editorial. When...

367

Quality Assurance Exchange August 2011  

Office of Environmental Management (EM)

Editor: Debbie Rosano: 301-903-8177, debbie.rosano@hq.doe.gov Quality Assurance Web site: www.hss.energy.govnuclearsafetyqa Questions or Comments? Please submit to...

368

International Quality Assurance Standards (Presentation)  

SciTech Connect (OSTI)

Tests to make quantitative predictions about photovoltaic (PV) modules are needed. This presentation proposes the creation of international quality assurance standards for PV modules.

Kurtz, S.; Hacke, P.; Wohlgemuth, J.; Kempe, M.; Yamamichi, M.

2011-02-01T23:59:59.000Z

369

Groundwater Quality Rules (New Jersey)  

Broader source: Energy.gov [DOE]

The protection of ambient ground water quality through the establishment of constituent standards for ground water pollutants is the subject of this chapter. These constituent standards are...

370

Quality Assurance Exchange, March 2006  

Broader source: Energy.gov (indexed) [DOE]

on Performing Assessments: Auditing Tools & Techniques 1 Lessons Learned: Quality Assurance Related to Fastener Torque Requirements 2 Washington Closure Hanford Safety Software...

371

Cache directory look-up re-use as conflict check mechanism for speculative memory requests  

DOE Patents [OSTI]

In a cache memory, energy and other efficiencies can be realized by saving a result of a cache directory lookup for sequential accesses to a same memory address. Where the cache is a point of coherence for speculative execution in a multiprocessor system, with directory lookups serving as the point of conflict detection, such saving becomes particularly advantageous.

Ohmacht, Martin

2013-09-10T23:59:59.000Z

372

Temperature-and Energy-Constrained Scheduling in Multitasking Systems: A Model Checking Approach  

E-Print Network [OSTI]

, leakage power is ex- ponentially proportional to temperature, which potentially results in more thermal and temperature in micro- processors. This has raised urgent requirement for both power and thermal management The ongoing scaling of semiconductor technology is causing se- vere increase of on-chip power density

Mishra, Prabhat

373

Protein quality control in the mammalian endoplasmic reticulum  

E-Print Network [OSTI]

Quality control is an important part of protein biogenesis. Aberrant proteins must be destroyed before they aggregate and cause deleterious effects. Failure to do so can result in cell death or malfunction and, ultimately, ...

Klemm, Elizabeth J. (Elizabeth Joanna)

2011-01-01T23:59:59.000Z

374

Soil Quality Information Sheet Rangeland Soil Quality--Compaction  

E-Print Network [OSTI]

Soil Quality Information Sheet Rangeland Soil Quality--Compaction USDA, Natural Resources Conservation Service May 2001 Rangeland Sheet 4 What is compaction? Soil compaction occurs when moist or wet soil aggregates are pressed together and the pore space between them is reduced. Compaction changes

375

Soil Quality Information Sheet Rangeland Soil Quality--Introduction  

E-Print Network [OSTI]

Soil Quality Information Sheet Rangeland Soil Quality--Introduction USDA, Natural Resources of the soil, the vegetation, the water, and the air as well as the ecological processes of the rangeland ecosystem are balanced and sustained. What is soil? Soil is a dynamic resource that supports plants

376

Soil Quality Information Sheet Rangeland Soil Quality--Wind Erosion  

E-Print Network [OSTI]

Soil Quality Information Sheet Rangeland Soil Quality--Wind Erosion USDA, Natural Resources of the earth's surface by wind. Wind erosion removes and redistributes soil. Small blowout areas may, fence rows, and roadbanks. In many cases the fine soil particles and organic matter are blown offsite

377

Soil Quality Information Sheet Rangeland Soil Quality--Water Erosion  

E-Print Network [OSTI]

Soil Quality Information Sheet Rangeland Soil Quality--Water Erosion USDA, Natural Resources and removal of soil material by water. The process may be natural or accelerated by human activity. The rate of erosion may be very slow to very rapid, depending on the soil, the local landscape, and weather conditions

378

Unit 10: Software Quality To introduce software quality management and  

E-Print Network [OSTI]

. ¥ ISO 9001 Quality Systems - Model for Quality Assurance in Design/Development, Production, Installation intervals by management to ensure its continuing suitability, effectiveness and conformance with ISO 9001 with particular reference to the requirements of ISO 9000 and associated standards. Ð To introduce QFD

Finkelstein, Anthony

379

Current Quality Culture Mini Paper Six Sigma Quality Control  

E-Print Network [OSTI]

Current Quality Culture Mini Paper Six Sigma Quality Control By: Shawn Higbee Steve Soseman Kaya, they want zero." - John Bertrand, President, A.O. Smith Electrical Products Company What is Six Sigma? SixSig_pg140-2.html Is Six Sigma good for every company? The benefits of implementing a 6 include increased

Vardeman, Stephen B.

380

Quality Assurance 8-1 8. Quality Assurance  

E-Print Network [OSTI]

The overall goal of a well-designed and well-implemented sampling and analysis program is to measure of a quality assurance/quality control (QA/QC) program for environmental monitoring activities at the ORR sampling QA program and for incorporation of new procedures to reflect chang- ing technologies

Pennycook, Steve

Note: This page contains sample records for the topic "quality check results" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Quality Management Why bother Certificating?  

E-Print Network [OSTI]

) (Prevention) (Direction) BS 5750 1979-1987 ISO 9001/2/3 1987-2000 ISO 9001 2000, amended 2008 #12;5 What RECORDS / FORMS INTENT WHAT? PROOF HOW? WHY? #12;8 ISO 9001:2008 The Structure: ISO 9001 - Q Relationships ISO 9001:2008 Based on the 8 Quality Management Principles: #12;11 Quality Management Process

Paxton, Anthony T.

382

QUALITY of LIFE 2009 Report  

E-Print Network [OSTI]

QUALITY of LIFE in Hawai`i 2009 Report Center on the Family University of Hawai`i Department of Business, Economic Development & Tourism #12;2 QUALITY OF LIFE IN HAWAI`I The QOL framework a total of 24 dimensions across the 6 domains) that address key living conditions, outcomes of societal

383

SAPHIRE 8 Quality Assurance Software Metrics Report  

SciTech Connect (OSTI)

The purpose of this review of software metrics is to examine the quality of the metrics gathered in the 2010 IV&V and to set an outline for results of updated metrics runs to be performed. We find from the review that the maintenance of accepted quality standards presented in the SAPHIRE 8 initial Independent Verification and Validation (IV&V) of April, 2010 is most easily achieved by continuing to utilize the tools used in that effort while adding a metric of bug tracking and resolution. Recommendations from the final IV&V were to continue periodic measurable metrics such as McCabe's complexity measure to ensure quality is maintained. The four software tools used to measure quality in the IV&V were CodeHealer, Coverage Validator, Memory Validator, Performance Validator, and Thread Validator. These are evaluated based on their capabilities. We attempted to run their latest revisions with the newer Delphi 2010 based SAPHIRE 8 code that has been developed and was successful with all of the Validator series of tools on small tests. Another recommendation from the IV&V was to incorporate a bug tracking and resolution metric. To improve our capability of producing this metric, we integrated our current web reporting system with the SpiraTest test management software purchased earlier this year to track requirements traceability.

Kurt G. Vedros

2011-08-01T23:59:59.000Z

384

A comparison algorithm to check LTSA Layer 1 and SCORM compliance in e-Learning sites  

E-Print Network [OSTI]

The success of e-Learning is largely dependent on the impact of its multimedia aided learning content on the learner over the hyper media. The e-Learning portals with different proportion of multimedia elements have different impact on the learner, as there is lack of standardization. The Learning Technology System Architecture (LTSA) Layer 1 deals with the effect of environment on the learner. From an information technology perspective it specifies learner interaction from the environment to the learner via multimedia content. Sharable Content Object Reference Model (SCROM) is a collection of standards and specifications for content of web-based e-learning and specifies how JavaScript API can be used to integrate content development. In this paper an examination is made on the design features of interactive multimedia components of the learning packages by creating an algorithm which will give a comparative study of multimedia component used by different learning packages. The resultant graph as output helps...

Sengupta, Souvik; Banerjee, Nilanjan

2012-01-01T23:59:59.000Z

385

QUALITY AND IMPACT Supplement 1 Evaluation of  

E-Print Network [OSTI]

QUALITY AND IMPACT Supplement 1 KoN09 Evaluation of Quality and Impact at SLU KoN Management Team Roland von Bothmer Johan Schnürer Boel �ström Katarina Vrede Per Andersson Supplement #12;QUALITY AND IMPACT Supplement2 Evaluation of Quality and Impact at SLU (KoN 09), Supplement #12;QUALITY AND IMPACT

386

Quality Assurance: Are Laboratories Assuring, Assessing, or Assuming the Quality of Clinical Testing Today?  

E-Print Network [OSTI]

Abstract: Quality assurance implies making certain, guaranteeing the attainment of quality. Do laboratories actually guarantee the quality of testing services today? If not, what is the purpose of quality assurance plans, programs, and practices? Have laboratories even defined the quality to be achieved for each test? If not, how can quality be guaranteed? Do current efforts in assessing quality provide for real-time control that will guarantee quality? If not, are laboratories just assuming that measuring quality will somehow make it happen? Even analytical quality, which is fundamental for the core production processes of any laboratory, is mainly assessed and assumed, not assured. Problems include the lack of well defined quality requirements, inadequate method performance, poorly designed statistical control procedures, misguided quality control instructions and recommendations, insufficient technical quality management skills, reduced operator skills, and delays in implementing of laboratory regulations. Quality assurance should be understood, not as a component, but as the outcome of a quality management process that includes quality planning, quality laboratory practices, quality control, quality assessment, and quality improvement, all linked together and guided by quality goals and customer requirements, and applied to the total testing process. In the future, automation and computerization will be necessary to manage the quality of centralized and distributed laboratory testing. Analytical quality will be guaranteed through on-line or on-board quality control. Other critical quality characteristics will need real-time monitors and control mechanisms to guarantee quality if process failures cannot be prevented.

James O. Westgard, Ph.D.

387

STUDENT ORIENTATION CHECK-LIST It is a campus requirement that each Student that works in your department receive the appropriate and  

E-Print Network [OSTI]

STUDENT ORIENTATION CHECK-LIST It is a campus requirement that each Student that works in your. The Student Employment Program has a mission to enhance the student life of the student by on the job training and a professional experience. This may be the first time the student steps into a work environment and here

Yang, Eui-Hyeok

388

MOTOR VEHICLE RECORD AUTHORIZATION This form authorizes Parking and Transportation (PTS) Fleet Services to conduct a motor vehicle record check to  

E-Print Network [OSTI]

MOTOR VEHICLE RECORD AUTHORIZATION This form authorizes Parking and Transportation (PTS) ­ Fleet Services to conduct a motor vehicle record check to verify eligibility to operate University of Michigan (U-M) vehicles. Form Instructions: · Complete each section of the form · Print and fax

Kirschner, Denise

389

Quality Management and Job Quality: How the ISO 9001 Standard forQuality Management Systems Affects Employees and Employers  

E-Print Network [OSTI]

and Job Quality: How the ISO 9001 Standard for Qualityhave examined how the ISO 9001 Quality Management Systemcompanies in California. ISO 9001 adopters subsequently had

Levine, David I.; Toffel, Michael W.

2008-01-01T23:59:59.000Z

390

Quality assurance for radioactive waste packages -- A general approach  

SciTech Connect (OSTI)

Radioactive waste packages must fulfill the requirements resulting from regulations concerning handling, treatment, conditioning, transportation, storage and disposal so that the goal of radioactive waste management can be achieved. Usually in different parts of waste management different quality systems are used, and different quality assurance measures are performed. In the paper, these problems ar elucidated and it is explained by means of the quality assurance performed for the disposal of radioactive waste in Germany how the fulfillment of the requirements of the repository can be ensured.

Martens, B.R. [Bundesamt fuer Strahlenschutz, Saltzgitter (Germany)

1993-12-31T23:59:59.000Z

391

Quality Assurance Exchange, October 2008  

Broader source: Energy.gov (indexed) [DOE]

do not reflect the current operating organization. 6. Based on the number and nature of the findings for this audit, it is evident the Quality Assurance Department is not...

392

Water Quality Regulations (Rhode Island)  

Broader source: Energy.gov [DOE]

The purpose of these regulations is to establish water quality standards for the state's surface waters. These standards are intended to restore, preserve and enhance the physical, chemical and...

393

Studies in Power Quality Success  

E-Print Network [OSTI]

the immediate problem, but provides little security in overall system reliability. However, a systematic approach to understanding the susceptibility of equipment, the current level of power quality and the types of corrective or mitigation measures available...

Laan, B. A.

394

A systems view of quality  

E-Print Network [OSTI]

Caterpillar, a leading manufacturer of construction and mining equipment, diesel and natural gas engines and industrial gas turbines, is committed to continually improving the quality of their products. Caterpillar currently ...

Utley, Tana L. (Tana Leigh)

2007-01-01T23:59:59.000Z

395

Quality Assurance Exchange, Winter 2010  

Office of Environmental Management (EM)

task of the ten quality criteria listed within 10 CFR 830 Subpart A 1 and DOE Order 414.1C 2 because of the many complexities and abstractions associated with design, and...

396

Water Quality Act (New Mexico)  

Broader source: Energy.gov [DOE]

This act establishes the Water Quality Control Commission and states the powers and duties of the commission. Rules are stated for adoption of regulations and standards and information is provided...

397

Council on Environmental Quality (CEQ)  

Broader source: Energy.gov [DOE]

Congress established the Council on Environmental Quality within the Executive Office of the President as part of the National Environmental Policy Act of 1969 (NEPA). In enacting NEPA, Congress...

398

A Virtuous Cycle: Tracing Democratic Quality through Equality  

E-Print Network [OSTI]

of 75 countries. It is found that while equalities of education and sanitation services are significantly related to democratic quality, healthcare is not, nor is government capacity shown to iv play a significant role. To further explore this... used in the analysis to model public service inequalities as a result of democratic quality, government capacity, and country wealth. The data used are taken from surveys that offer subnational measures of education, healthcare, and sanitation...

Ross, Ashley Dyan

2011-10-21T23:59:59.000Z

399

Quality Assurance Corporate Board | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Assurance Corporate Board Quality Assurance Corporate Board The Office of Environmental Management (EM) Quality Assurance Corporate Board is an executive board that includes both...

400

Supplying High-Quality, Raw Biomass  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Supplying High-Quality, Raw Biomass The building blocks to supply high-quality raw biomass start with harvesting and collection practices, product storage and recommendations of...

Note: This page contains sample records for the topic "quality check results" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

A fruit quality gene map of Prunus  

E-Print Network [OSTI]

Central Open Access A fruit quality gene map of PrunusAbstract Background: Prunus fruit development, growth,and maintaining stone fruit quality from production and

Ogundiwin, Ebenezer A; Peace, Cameron P; Gradziel, Thomas M; Parfitt, Dan E; Bliss, Fredrick A; Crisosto, Carlos H

2009-01-01T23:59:59.000Z

402

SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Design...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Design Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Design Checklist This checklist is intended to...

403

Quality Assurance for Residential Retrofit Programs | Department...  

Broader source: Energy.gov (indexed) [DOE]

Quality Assurance for Residential Retrofit Programs Quality Assurance for Residential Retrofit Programs Blue version of the EERE PowerPoint template, for use with PowerPoint 2007....

404

Quality New Mexico recognizes Community Programs Office  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

CPO receives Pion recognition Quality New Mexico recognizes Community Programs Office LANL has received 14 Pion and Roadrunner recognitions from Quality New Mexico since 1997....

405

Checking PDSF Quotas  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to User Group and Userof a blast-resistant naval Charles

406

Air Quality: Construction Project Air Permit Requirements  

E-Print Network [OSTI]

Air Quality: Construction Project Air Permit Requirements Department: Chemical and General Safety Program: Air Quality Owner: Program Manager Authority: ES&H Manual, Chapter 30, Air Quality1 All manager or operator must submit the completed form to the air quality program manager before the project

Wechsler, Risa H.

407

Quality Network Meeting 2nd Summary Notes  

E-Print Network [OSTI]

has already taken place at IMI in Lucerne Switzerland. She requested that the Faculty Quality Officers

408

On Linguistic Quality of Natural Language Requirements  

E-Print Network [OSTI]

, has now reached its limits. Like classical engineering switched from quality control to total qualityOn Linguistic Quality of Natural Language Requirements F. Fabbrini 1 , M. Fusani 1 , V. Gervasi 2 Informatica, Corso Italia 40, 56125 Pisa Italy. Abstract. We recognize the need for defining a quality model

Ruggieri, Salvatore

409

Quality engineering as a discipline of study.  

SciTech Connect (OSTI)

The current framework for quality scholarship in the United States ranges from the training and education of future quality engineers, managers, and professionals to focused and sustained research initiatives that, through academic institutions and other organizations, aim to improve the knowledge and application of quality across a variety of sectors. Numerous quality journals also provide a forum for professional dissemination of information.

Kolb, Rachel R.; Hoover, Marcey L.

2012-12-01T23:59:59.000Z

410

Ceramic fabricator quality revolution: A case study  

SciTech Connect (OSTI)

This case study discusses statistical process control and other quality tools in the application of continuous improvement and total quality management programs to a mature ceramic parts manufacturing operation that had been producing quality'' products for many years. By applying these tools, significant incremental improvements in process performance and product quality were achieved.

Martin, S.C. (Advanced Refractory Technologies, Inc., Buffalo, NY (United States))

1993-11-01T23:59:59.000Z

411

Conduct of Operations and Quality Assurance Compliance  

SciTech Connect (OSTI)

The purpose of this document is to present and detail the deliverables for the Tiger Team Action Plan, Finding MF-11, and milestones in the FY92 Performance Appraisal for Conduct of Operations from Sandia National Laboratories to DOE. The ``Proposal for Reporting Conduct of Operations & Quality Assurance Compliance to DOE`` describes what the deliverables shall be. Five major steps that result in the development of line practices are covered in this document. These line practices specify what Sandia will do to comply with the above DOE management orders. The five steps include: hazard classification; programmatic risk classification; management grouping; compliance plan; and corporate reporting.

Andrews, N.S.

1992-06-01T23:59:59.000Z

412

Conduct of Operations and Quality Assurance Compliance  

SciTech Connect (OSTI)

The purpose of this document is to present and detail the deliverables for the Tiger Team Action Plan, Finding MF-11, and milestones in the FY92 Performance Appraisal for Conduct of Operations from Sandia National Laboratories to DOE. The Proposal for Reporting Conduct of Operations Quality Assurance Compliance to DOE'' describes what the deliverables shall be. Five major steps that result in the development of line practices are covered in this document. These line practices specify what Sandia will do to comply with the above DOE management orders. The five steps include: hazard classification; programmatic risk classification; management grouping; compliance plan; and corporate reporting.

Andrews, N.S.

1992-06-01T23:59:59.000Z

413

Quality Assurance 8-1 8. Quality Assurance  

E-Print Network [OSTI]

of a well-designed and well-implemented sampling and analysis program is to measure accurately what assurance/quality control (QA/QC) program for environmental monitoring activities at the ORR is essential Martin analytical laboratories have well-established QA/QC programs, well- trained and highly qualified

Pennycook, Steve

414

Quality Assurance | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power Systems Engineering Research and DevelopmentDepartmentin DesignQuality Assurance forQuality

415

Development of a Coal Quality Expert  

SciTech Connect (OSTI)

ABB Power Plant Laboratories Combustion Engineering, Inc., (ABB CE) and CQ Inc. completed a broad, comprehensive program to demonstrate the economic and environmental benefits of using higher quality U.S. coals for electrical power generation and developed state-of-the-art user-friendly software--Coal Quality Expert (CQE)-to reliably predict/estimate these benefits in a consistent manner. The program was an essential extension and integration of R and D projects performed in the past under U.S. DOE and EPRI sponsorship and it expanded the available database of coal quality and power plant performance information. This software will permit utilities to purchase the lowest cost clean coals tailored to their specific requirements. Based on common interest and mutual benefit, the subject program was cosponsored by the U.S. DOE, EPRI, and eight U.S. coal-burning utilities. In addition to cosponsoring this program, EPN contributed its background research, data, and computer models, and managed some other supporting contracts under the terms of a project agreement established between CQ Inc. and EPRI. The essential work of the proposed project was performed under separate contracts to CQ Inc. by Electric Power Technologies (El?'T), Black and Veatch (B and V), ABB Combustion Engineering, Babcock and Wilcox (B and W), and Decision Focus, Inc. Although a significant quantity of the coals tied in the United States are now cleaned to some degree before firing, for many of these coals the residual sulfur content requires users to install expensive sulfur removal systems and the residual ash causes boilers to operate inefficiently and to require frequent maintenance. Disposal of the large quantities of slag and ash at utility plant sites can also be problematic and expensive. Improved and advanced coal cleaning processes can reduce the sulfur content of many coals to levels conforming to environmental standards without requiring post-combustion desulfurization systems. Also, some coals may be beneficiated or blended to a quality level where significantly less costly desulfurization systems are needed. Coal cleaning processes may also be used to remove the precursors of other troublesome emissions that can be identified now or in the future. An added benefit of coal cleaning and blending is the reduction in concentrations of mineral impurities in the fuel leading to improved performance and operation of the'' boiler in which it is fired. The ash removed during the pre-combustion cleaning process can be more easily and safely disposed of at the mine than at the utility plant after combustion. EPRI's Coal Quality Impact Model (CQIM) has shown that improved fuel quality can result in savings in unit capital and operating costs. This project produced new and improved software to select coal types and specifications resulting in the best quality and lowest cost fuel to meet specific environmental requirements.

None

1998-06-20T23:59:59.000Z

416

On Generalized Low-Rate Denial-of-Quality Attack Against Internet Services  

E-Print Network [OSTI]

On Generalized Low-Rate Denial-of-Quality Attack Against Internet Services Yajuan Tang, Xiapu Luo,csrchang}@comp.polyu.edu.hk, qing.hui@ttu.edu Abstract--Low-rate Denial of Quality (DoQ) attacks, by send- ing intermittent bursts generalize the previous results by considering arbitrary attack intervals. We obtain two sets of new results

Chang, Rocky Kow-Chuen

417

Quality assurance manual: Volume 1  

SciTech Connect (OSTI)

Stanford Linear Accelerator Center (SLAC) is a DOE-supported research facility that carries out experimental and theoretical research in high energy physics and developmental work in new techniques for particle acceleration and experimental instrumentation. The purpose of this manual is to describe SLAC quality assurance policies and practices in various parts of the Laboratory.

Oijala, J.E.

1988-06-01T23:59:59.000Z

418

PowerQuality Jonathan Manson &  

E-Print Network [OSTI]

of the avoidable wastage and economic losses incurred by these industrial sectors at a time when energy sources of PQ issues, measurement undertaken and relations with the supplying electrical utility. The 6th Report #12;Power Quality Campaign 2 www.leonardo-energy.org 1. Foreword and Executive Summary Since

Schrijver, Karel

419

Recent Results from HERA  

E-Print Network [OSTI]

HERA $ep$ collider provides unique information on the proton structure. High center of mass energy $s=320$ GeV gives access to both the low Bjorken-$x$ domain and regime of high momentum transfers $Q$. Recently the H1 collaboration reported a high precision measurement of the structure function $F_2$ at low $x$ leading to tight constraints on the sea quark and gluon densities. Both the H1 and ZEUS collaborations measure the structure function $F_L$ which provides an important cross check of the conventional QCD picture. This measurement is recently extended by H1 to low $Q^2$ where small $x$ corrections may play important role. An ultimate precision of the deep inelastic scattering cross section measurement is achieved by combining the measurements of the H1 and ZEUS collaborations. The combined data are used as a sole input to a QCD fit to obtained HERA PDF set. New measurements of inclusive $e^-p$ neutral and charged current scattering cross sections by the ZEUS collaboration at high $Q^2$ improve precision in this kinematic domain. H1 analysis of the DIS high $P_t$ jet production cross section is used for a determination of the strong coupling constant $\\alpha_S$. Separation of the strange quark density from the total sea is obtained by the HERMES collaboration using tagged $K^{\\pm}$ production.

A. Glazov

2009-11-01T23:59:59.000Z

420

Biospecimen Reporting for Improved Study Quality  

SciTech Connect (OSTI)

Human biospecimens are subjected to collection, processing, and storage that can significantly alter their molecular composition and consistency. These biospecimen preanalytical factors, in turn, influence experimental outcomes and the ability to reproduce scientific results. Currently, the extent and type of information specific to the biospecimen preanalytical conditions reported in scientific publications and regulatory submissions varies widely. To improve the quality of research that uses human tissues, it is crucial that information on the handling of biospecimens be reported in a thorough, accurate, and standardized manner. The Biospecimen Reporting for Improved Study Quality (BRISQ) recommendations outlined herein are intended to apply to any study in which human biospecimens are used. The purpose of reporting these details is to supply others, from researchers to regulators, with more consistent and standardized information to better evaluate, interpret, compare, and reproduce the experimental results. The BRISQ guidelines are proposed as an important and timely resource tool to strengthen communication and publications on biospecimen-related research and to help reassure patient contributors and the advocacy community that their contributions are valued and respected.

Moore, Ph.D., Helen M.; Kelly, Ph.D., Andrea B.; Jewell, Ph.D., Scott D.; McShane, Ph.D., Lisa M.; Clark, M.D., Douglas P.; Greenspan, M.D., Renata; Hayes, M.D., Daniel F.; Hainaut, Ph.D., Pierre; Kim, Paula; Mansfield, Ph.D., Elizabeth A.; Potapova, Ph.D., Olga; Riegman, Ph.D., Peter; Rubinstein, Ph.D., Yaffa; Seijo, M.S., Edward; Somiari, Ph.D., Stella; Chir., B; Weier, Ph.D., Heinz-Ulrich; Zhu, Ph.D., Claire; Vaught, Ph.D., Jim; Watson,M.B., Peter

2010-12-27T23:59:59.000Z

Note: This page contains sample records for the topic "quality check results" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Biospecimen Reporting for Improved Study Quality (BRISQ)  

SciTech Connect (OSTI)

Human biospecimens are subjected to collection, processing, and storage that can significantly alter their molecular composition and consistency. These biospecimen preanalytical factors, in turn, influence experimental outcomes and the ability to reproduce scientific results. Currently, the extent and type of information specific to the biospecimen preanalytical conditions reported in scientific publications and regulatory submissions varies widely. To improve the quality of research that uses human tissues, it is crucial that information on the handling of biospecimens be reported in a thorough, accurate, and standardized manner. The Biospecimen Reporting for Improved Study Quality (BRISQ) recommendations outlined herein are intended to apply to any study in which human biospecimens are used. The purpose of reporting these details is to supply others, from researchers to regulators, with more consistent and standardized information to better evaluate, interpret, compare, and reproduce the experimental results. The BRISQ guidelines are proposed as an important and timely resource tool to strengthen communication and publications on biospecimen-related research and to help reassure patient contributors and the advocacy community that their contributions are valued and respected.

National Cancer Institute; Jewell, Ph.D., Scott D.; Seijo, M.S., Edward; Kelly, Ph.D., Andrea; Somiari, Ph.D., Stella; B.Chir., M.B.; McShane, Ph.D., Lisa M.; Clark, M.D., Douglas; Greenspan, M.D., Renata; Hayes, M.D., Daniel F.; Hainaut, Ph.D., M.S., Pierre; Kim, Paula; Mansfield, Ph.D., Elizabeth; Potapova, Ph.D., Olga; Riegman, Ph.D., Peter; Rubinstein, Ph.D., Yaffa; Weier, Ph.D., Heinz-Ulrich; Zhu, Ph.D., Claire; Moore, Ph.D., Helen M.; Vaught, Ph.D., Jim; Watson, Peter

2010-09-02T23:59:59.000Z

422

Biospecimen Reporting for Improved Study Quality (BRISQ)  

SciTech Connect (OSTI)

Human biospecimens are subject to a number of different collection, processing, and storage factors that can significantly alter their molecular composition and consistency. These biospecimen preanalytical factors, in turn, influence experimental outcomes and the ability to reproduce scientific results. Currently, the extent and type of information specific to the biospecimen preanalytical conditions reported in scientific publications and regulatory submissions varies widely. To improve the quality of research utilizing human tissues it is critical that information regarding the handling of biospecimens be reported in a thorough, accurate, and standardized manner. The Biospecimen Reporting for Improved Study Quality (BRISQ) recommendations outlined herein are intended to apply to any study in which human biospecimens are used. The purpose of reporting these details is to supply others, from researchers to regulators, with more consistent and standardized information to better evaluate, interpret, compare, and reproduce the experimental results. The BRISQ guidelines are proposed as an important and timely resource tool to strengthen communication and publications around biospecimen-related research and help reassure patient contributors and the advocacy community that the contributions are valued and respected.

Moore, Ph.D., Helen M.; Kelly Ph.D., Andrea; Jewell Ph.D., Scott D.; McShane Ph.D., Lisa M.; Clark M.D., Douglas P.; Greenspan M.D., Renata; Hayes M.D., Daniel F.; Hainaut Ph.D.,, Pierre; Kim, Paula; Mansfield Ph.D., Elizabeth; Potapova Ph.D., Olga; Riegman Ph.D., Peter; Rubinstein Ph.D., Yaffa; Seijo M.S., Edward; Somiari Ph.D., Stella; Watson M.B., Peter; Weier Ph.D., Heinz-Ulrich; Zhu Ph.D., Claire; Vaught Ph.D., Jim

2011-04-26T23:59:59.000Z

423

CSP 587: Software Quality Management S. Kan, Software Quality engineering, Addison-Wesley.  

E-Print Network [OSTI]

CSP 587: Software Quality Management Texts S. Kan, Software Quality engineering, Addison hours · Quality Appraisal Programs 5 hours SEI's Capability Maturity Model ISO 9000 Total 45 hours CSP

Heller, Barbara

424

Tomotherapy treatment plan quality assurance: The impact of applied criteria on passing rate in gamma index method  

SciTech Connect (OSTI)

Purpose: Pretreatment patient plan verification with gamma index (GI) metric analysis is standard procedure for intensity modulated radiation therapy (IMRT) treatment. The aim of this paper is to evaluate the variability of the local and global gamma index obtained during standard pretreatment quality assurance (QA) measurements for plans performed with Tomotherapy unit. The QA measurements were performed with a 3D diode array, using variable passing criteria: 3%/3 mm, 2%/2 mm, 1%/1 mm, each with both local and global normalization.Methods: The authors analyzed the pretreatment QA results for 73 verifications; 37 were prostate cancer plans, 16 were head and neck plans, and 20 were other clinical sites. All plans were treated using the Tomotherapy Hi-Art System. Pretreatment QA plans were performed with the commercially available 3D diode array ArcCHECK™. This device has 1386 diodes arranged in a helical geometry spaced 1 cm apart. The dose measurements were acquired on the ArcCHECK™ and then compared with the calculated dose using the standard gamma analysis method. The gamma passing rate (%GP), defined as the percentage of points satisfying the condition GI < 1, was calculated for different criteria (3%/3 mm, 2%/2 mm, 1%/1 mm) and for both global and local normalization. In the case of local normalization method, the authors set three dose difference threshold (DDT) values of 2, 3, and 5 cGy. Dose difference threshold is defined as the minimum absolute dose error considered in the analysis when using local normalization. Low-dose thresholds (TH) of 5% and 10% were also applied and analyzed.Results: Performing a paired-t-test, the authors determined that the gamma passing rate is independent of the threshold values for all of the adopted criteria (5%TH vs 10%TH, p > 0.1). Our findings showed that mean %GPs for local (or global) normalization for the entire study group were 93% (98%), 84% (92%), and 66% (61%) for 3%/3 mm, 2%/2 mm, and 1%/1 mm criteria, respectively. DDT was equal to 2 cGy for the local normalization analysis cases. The authors observed great variability in the resulting %GP. With 3%/3 mm gamma criteria, the overall passing rate with local normalization was 4.6% less on the average than with global one, as expected. The wide difference between %GP calculated with global or local approach is also confirmed by an unpaired t-test statistical analysis.Conclusions: The variability of %GP obtained confirmed the necessity to establish defined agreement criteria that could be universal and comparable between institutions. In particular, while the gamma passing rate does not depend on the choice of threshold, the choice of DDT strongly influences the gamma passing rate for local calculations. The difference between global and local %GP was statistically significant for prostate and other treatment sites when DDT was changed from 2 to 3 cGy.

Bresciani, Sara; Di Dia, Amalia; Maggio, Angelo; Cutaia, Claudia; Miranti, Anna; Infusino, Erminia; Stasi, Michele [Medical Physics Division, Institute for Cancer Research and Treatment (IRCCS), 10060 Candiolo (Italy)] [Medical Physics Division, Institute for Cancer Research and Treatment (IRCCS), 10060 Candiolo (Italy)

2013-12-15T23:59:59.000Z

425

Data quality improvements for FAA  

SciTech Connect (OSTI)

Effective communication among air safety professionals is only as good as the information being communicated. Data sharing cannot be effective unless the data are relevant to aviation safety problems, and decisions based on faulty data are likely to be invalid. The validity of aviation safety data depends on satisfying two primary characteristics. Data must accurately represent or conform to the real world (conformance), and it must be relevant or useful to addressing the problems at hand (utility). The FAA, in efforts to implement the Safety Performance Analysis System (SPAS), identified significant problems in the quality of the data which SPAS and FAA air safety professionals would use in defining the state of aviation safety in the US. These finding were reinforced by Department of Transportation Inspector General and General Accounting Office investigations into FAA surveillance of air transport operations. Many recent efforts to improve data quality have been centered on technological solutions to the problems. They concentrate on reducing errors in the data (conformance), but they cannot adequately address the relationship of data to need (utility). Sandia National Laboratories, working with the FAA`s Airport and Aircraft Safety Research and Development Division and the Flight Standards Service, has been involved in four programs to assist FAA in addressing their data quality problems. The Sandia approach has been data-driven rather than technology-driven. In other words, the focus has been on first establishing the data requirements by analyzing the FAA`s surveillance and decision-making processes. This process analysis looked at both the data requirements and the methods used to gather the data in order to address both the conformance and utility problems inherent in existing FAA data systems. This paper discusses Sandia`s data quality programs and their potential improvements to the safety analysis processes and surveillance programs of the FAA.

Perry, R.; Marlman, K.; Olson, D.; Werner, P.

1997-09-01T23:59:59.000Z

426

Project Hanford management contract quality improvement project management plan  

SciTech Connect (OSTI)

On July 13, 1998, the U.S. Department of Energy, Richland Operations Office (DOE-RL) Manager transmitted a letter to Fluor Daniel Hanford, Inc. (FDH) describing several DOE-RL identified failed opportunities for FDH to improve the Quality Assurance (QA) Program and its implementation. In addition, DOE-RL identified specific Quality Program performance deficiencies. FDH was requested to establish a periodic reporting mechanism for the corrective action program. In a July 17, 1998 response to DOE-RL, FDH agreed with the DOE concerns and committed to perform a comprehensive review of the Project Hanford Management Contract (PHMC) QA Program during July and August, 1998. As a result, the Project Hanford Management Contract Quality Improvement Plan (QIP) (FDH-3508) was issued on October 21, 1998. The plan identified corrective actions based upon the results of an in-depth Quality Program Assessment. Immediately following the scheduled October 22, 1998, DOE Office of Enforcement and Investigation (EH-10) Enforcement Conference, FDH initiated efforts to effectively implement the QIP corrective actions. A Quality Improvement Project (QI Project) leadership team was assembled to prepare a Project Management Plan for this project. The management plan was specifically designed to engage a core team and the support of representatives from FDH and the major subcontractors (MSCs) to implement the QIP initiatives; identify, correct, and provide feedback as to the root cause for deficiency; and close out the corrective actions. The QI Project will manage and communicate progress of the process.

ADAMS, D.E.

1999-03-25T23:59:59.000Z

427

Quality Assurance Guide for Project Management  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Guide provides acceptable approaches for implementing the Quality Assurance requirements and criteria of DOE O 413.3A related to the development and implementation of a Quality Assurance Program for the project. No cancellations.

2008-06-27T23:59:59.000Z

428

302:20130613.1452 Quality Assurance Group  

E-Print Network [OSTI]

the ISO 9001:2008 standard for quality systems. All elements of the ISO model are incorporated for critical spaceflight or commercial purposes, we design and implement quality plans adapted appropriately

Mojzsis, Stephen J.

429

A quality management approach to civil engineering  

E-Print Network [OSTI]

A methodology is presented for basing quality improvement decisions in civil engineering design firms upon historical data, statistical methods, and hydrologic modeling techniques. Statistical Process Control (SPC) is a quality management tool...

Baber, Thomas James

1999-01-01T23:59:59.000Z

430

Georgia Water Quality Control Act (Georgia)  

Broader source: Energy.gov [DOE]

The Georgia Water Quality Control Act (WQCA) is a set of environmental regulations and permitting requirements that comply with the federal Clean Water Act. The Georgia Water Quality Control Act...

431

Chapter 53 Ambient Air Quality (Kentucky)  

Broader source: Energy.gov [DOE]

Kentucky Administrative Regulation Chapter 53, entitled Ambient Air Quality, is promulgated under the authority of the Division of Air Quality within the Energy and Environment Cabinet’s Department...

432

Ambient Air Quality Criteria (Manitoba, Canada)  

Broader source: Energy.gov [DOE]

The Manitoba Ambient Air Quality Criteria schedule lists maximum time-based pollutant concentration levels for the protection and preservation of ambient air quality within the Province of Manitoba...

433

Modeling Quality Information within Business Process Models  

E-Print Network [OSTI]

Modeling Quality Information within Business Process Models Robert Heinrich, Alexander Kappe. Business process models are a useful means to document information about structure and behavior literature and tool survey on modeling quality information within business process models. Keywords: Business

Paech, Barbara

434

OG&E's Power Quality Program  

E-Print Network [OSTI]

Our commitment to reliable electric power does not stop at the meter, but extends all the way to the equipment that it operates. Through the Power Quality Program, we provide professional power consultants to assure that the customer has quality...

Davis, M.

435

ANNUAL REPORT: INDICATORS OF INSTITUTIONAL QUALITY  

E-Print Network [OSTI]

ANNUAL REPORT: INDICATORS OF INSTITUTIONAL QUALITY 2010-2011 #12;2 #12;3 T A B L E O F C O N T E N ................................................................................................................. 5 Quantitative Measures of Quality................................................................................................................... 20 Total Research Expenditures

Farritor, Shane

436

Georgia Air Quality Control Act (Georgia)  

Broader source: Energy.gov [DOE]

The Georgia Air Quality Control Act (AQCA) is a set of environmental regulations, permitting requirements, and air quality standards that control the amount of pollutants emitted and who emits them...

437

QUALITY AND IMPACT 1 Evaluation of  

E-Print Network [OSTI]

QUALITY AND IMPACT 1 KoN09 Evaluation of Quality and Impact at SLU KoN Management Team Roland von of Quality and Impact at SLU (KoN 09) KoN Management Team: Roland von Bothmer, Johan Schnürer, Boel �ström Bothmer Johan Schnürer Boel �ström Katarina Vrede Per Andersson #12;QUALITY AND IMPACT2 Evaluation

438

Slag pit practices to improve slag quality  

SciTech Connect (OSTI)

Slag quality had deteriorated recently. Without the explicit approval for slag quality by the Illinois Department of Transportation, the slag would not be saleable. Disposal of slag to landfills was going to be an expensive solution and rife with environmental concerns. A slag quality control program embarked on in mid-1994 restored slag quality to desired specifications. This paper describes the changes in slag pit practice adopted following extensive tests performed on cooling slag under controlled conditions.

Mertdogan, A. [Metal Enterprises, Research and Technology, Inc., Homewood, IL (United States); Gambol, F.C.; Spaeth, J.R.; Zbos, J.; Batka, R. [Acme Steel Co., Chicago, IL (United States); Tolliver, D. [Heckett MultiServ, Whiting, IN (United States)

1996-12-31T23:59:59.000Z

439

North Central Texas Water Quality Final Report  

E-Print Network [OSTI]

source pollution sources in the watershed. The District has already initiated efforts to address the water quality issues, developing a water quality monitoring program to collect data for these reservoirs and their associated watersheds. The District... has collected water quality data for nearly 40 parameters since 1989. Effluent discharges from the wastewater treatment plans and nonpoint source pollution from urban and agricultural runoff are reported as the major causes for water quality...

Berthold, T. Allen

440

SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Requirements...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Requirements Management Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Requirements Management Checklist The following checklist is intended to provide system owners,...

Note: This page contains sample records for the topic "quality check results" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Preacceptance...  

Broader source: Energy.gov (indexed) [DOE]

PROGRAM: Preacceptance Checklist Security Issues SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Preacceptance Checklist Security Issues The following checklist is intended to...

442

Fuel Efficiency Automobile Test Quality Assurance Narrative  

E-Print Network [OSTI]

Fuel Efficiency Automobile Test Quality Assurance Narrative Standard Operating Procedures Help ........................................................................................................... 3 FEAT Standard Operating Procedures...................................................................................................................24 Maintenance Items

Denver, University of

443

CSUF Clubs & Organizations!!! What can the Titan Pride Center do for you? The Titan Pride Center wants to help get the word out about CSUF clubs and organizations! Check out all of the ways we can help your group!  

E-Print Network [OSTI]

wants to help get the word out about CSUF clubs and organizations! Check out all of the ways we can help of your promotional materials. We will have a table ready for you and even help promote with you! Puzzle

de Lijser, Peter

444

Increased Mercury Bioaccumulation Follows Water Quality Improvement  

SciTech Connect (OSTI)

Changes in physical and chemical characteristics of aquatic habitats made to reduce or eliminate ecological risks can sometimes have unforeseen consequences. Environmental management activities on the U.S. Dept. of Energy reservation in Oak Ridge, Tennessee,have succeeded in improving water quality in streams impacted by discharges fi-om industrial facilities and waste disposal sites. The diversity and abundance of pollution-sensitive components of the benthic macroinvertebrate communities of three streams improved after new waste treatment systems or remedial actions reduced inputs of various toxic chemicals. Two of the streams were known to be mercury-contaminated from historical spills and waste disposal practices. Waterborne mercury concentrations in the third were typical of uncontaminated systems. In each case, concentrations of mercury in fish, or the apparent biological availability of mercury increased over the period during which ecological metrics indicated improved water quality. In the system where waterborne mercury concentrations were at background levels, increased mercury bioaccumulation was probably a result of reduced aqueous selenium concentrations; however, the mechanisms for increased mercury accumulation in the other two streams remain under investigation. In each of the three systems, reduced inputs of metals and inorganic anions was followed by improvements in the health of aquatic invertebrate communities. However, this reduction in risk to aquatic invertebrates was accompanied by increased risk to humans and piscivorous wildlife related to increased mercury concentrations in fish.

Bogle, M.A.; Peterson, M.J.; Smith, J.G.; Southworth, G.R.

1999-09-15T23:59:59.000Z

445

QUALITY TOOLS APPLIED TO TERRITORIAL INTELLIGENCE Cinta C. Garca Vzquez  

E-Print Network [OSTI]

on a description of Territorial Intelligence; the second one contains the description of the "Six Sigma" process; and lastly, the description of some of the quality tools used by the Six Sigma project. Territorial based on the results observed in the assessment?. The "Six Sigma" method, deal with this question using

Boyer, Edmond

446

Transformer Thermal Modeling: Improving Reliability Using Data Quality Control  

E-Print Network [OSTI]

1 Transformer Thermal Modeling: Improving Reliability Using Data Quality Control Daniel J. Tylavsky--Eventually all large transformers will be dynamically loaded using models updated regularly from field measured data. Models obtained from measured data give more accurate results than models based on transformer

447

5 Data Quality Issues and Geographic  

E-Print Network [OSTI]

introduces the readers to theoretical concepts regarding quality management and risk management on this theoretical foundation, this chapter then presents a pragmatic approach of quality and risk management99 5 Data Quality Issues and Geographic Knowledge Discovery Marc Gervais Department of Geomatics

448

Review article Tomato fruit quality in relation  

E-Print Network [OSTI]

Review article Tomato fruit quality in relation to water and carbon fluxes Soraya GUICHARDa, Nadia in the formation of tomato fruit quality. This approach has provided new insights that help in understanding and controlling some of the major variables of fruit quality. Variations in the concentration of dry matter

Paris-Sud XI, Université de

449

Water quality management plan for Cherokee Reservoir  

SciTech Connect (OSTI)

The management plan provides an assessment of Cherokee Reservoir's current water quality, identifies those factors which affect reservoir water quality, and develops recommendations aimed at restoring or maintaining water quality at levels sufficient to support diverse beneficial uses. 20 references, 8 figures, 15 tables. (ACR)

Not Available

1984-01-01T23:59:59.000Z

450

Transuranic Waste Characterization Quality Assurance Program Plan  

SciTech Connect (OSTI)

This quality assurance plan identifies the data necessary, and techniques designed to attain the required quality, to meet the specific data quality objectives associated with the DOE Waste Isolation Pilot Plant (WIPP). This report specifies sampling, waste testing, and analytical methods for transuranic wastes.

NONE

1995-04-30T23:59:59.000Z

451

Basic Considerations on Business Process Quality  

E-Print Network [OSTI]

various #12;forms, which are often subsumed under the term Total Quality Management (TQM), can be foundBasic Considerations on Business Process Quality Matthias Lohrmann1,2 and Manfred Reichert1 1 Wirtschaftsprüfungsgesellschaft, Berlin, Germany mlohrmann@kpmg.com, manfred.reichert@uni-ulm.de Abstract. Quality management

Ulm, Universität

452

QUALITY ASSURANCE MANUAL Revised March 2009  

E-Print Network [OSTI]

. Guidelines 4-7 III. Standards of Care 8 IV. Standard of Care by Discipline Dental Hygiene 9 Endodontics 10 set forth in that paper. Quality assessment is a measure of quality and is a continuing function;GUIDELINES The following guidelines shall serve to guide the Quality Assurance Committee in the performance

453

Workshop on indoor air quality research needs  

SciTech Connect (OSTI)

Workshop participants report on indoor air quality research needs including the monitoring of indoor air quality, report of the instrumentation subgroup of indoor air quality, health effects, and the report of the control technology session. Risk analysis studies addressing indoor environments were also summarized. (DLS)

Not Available

1980-01-01T23:59:59.000Z

454

Tank waste remediation system characterization project quality policies  

SciTech Connect (OSTI)

This quality plan describes the system used by Characterization Project management to achieve quality. This plan is comprised of eleven quality policies which, when taken together, form a management system deployed to achieve quality. This quality management system is based on the customer`s quality requirements known as the `RULE`, 10 CFR 830.120, Quality Assurance.

Board, D.C.

1997-09-24T23:59:59.000Z

455

Tank waste remediation system characterization project quality policies  

SciTech Connect (OSTI)

This quality plan describes the system used by Characterization Project management to achieve quality. This plan is comprised on eleven quality policies which, when taken together, form a management system deployed to achieve quality. This quality management system is based on the customer`s quality requirements known as the `RULE`, 10 CFR 830.120, Quality Assurance.

Trible, T.C., Westinghouse Hanford

1996-07-31T23:59:59.000Z

456

Plutonium stabilization and handling quality assurance program plan  

SciTech Connect (OSTI)

This Quality Assurance Program Plan (QAPP) identifies project quality assurance requirements for all contractors involved in the planning and execution of Hanford Site activities for design, procurement, construction, testing and inspection for Project W-460, Plutonium Stabilization and Handling. The project encompasses procurement and installation of a Stabilization and Packaging System (SPS) to oxidize and package for long term storage remaining plutonium-bearing special nuclear materials currently in inventory at the Plutonium Finishing Plant (PFP), and modification of vault equipment to allow storage of resulting packages of stabilized SNM.

Weiss, E.V.

1998-04-22T23:59:59.000Z

457

Field quality measurements of a 2-Tesla transmission line magnet  

SciTech Connect (OSTI)

A prototype 2-Tesla superconducting transmission line magnet for future hadron colliders was designed, built and tested at Fermilab. The 1.5 m long, combined-function gradient-dipole magnet has a vertical pole aperture of 20 mm. To measure the magnetic field quality in such a small magnet aperture, a specialized rotating coil of 15.2 mm diameter, 0.69 m long was fabricated. Using this probe, a program of magnetic field quality measurements was successfully performed. Results of the measurements are presented and discussed.

Velev, G.V.; Foster, W.; Kashikhin, V.; Mazur, P.; Oleck, A.; Piekarz, H.; Schlabach, P.; Sylvester, C.; /Fermilab; Wake, M.; /KEK, Tsukuba

2005-09-01T23:59:59.000Z

458

Improving stroke care: Quality of care and health education in patients with a stroke or transient ischemic attack.  

E-Print Network [OSTI]

??abstractThis thesis focuses on the applicability of results of clinical trials of stroke and TIA patients in everyday practice and on measurement of quality of… (more)

E. Maasland (Lisette)

2011-01-01T23:59:59.000Z

459

Survey of the Quality and Stability of Biodiesel and Biodiesel Blends in the United States in 2004  

SciTech Connect (OSTI)

Reports results gathered in 2004 from quality and stability surveys in the United States of biodiesel (B100) and 20% biodiesel (B20) in petroleum diesel.

McCormick, R. L.; Alleman, T. L.; Ratcliffe, M.; Moens, L.; Lawrence, R.

2005-10-01T23:59:59.000Z

460

E-Print Network 3.0 - assessing air pollution Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

air pollution Search Powered by Explorit Topic List Advanced Search Sample search results for: assessing air pollution Page: << < 1 2 3 4 5 > >> 1 Air Quality: Reporting...

Note: This page contains sample records for the topic "quality check results" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

E-Print Network 3.0 - air pollution due Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

due Search Powered by Explorit Topic List Advanced Search Sample search results for: air pollution due Page: << < 1 2 3 4 5 > >> 1 Air Quality: Reporting Requirements Department:...

462

E-Print Network 3.0 - acute total body Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Sciences and Ecology ; Engineering 2 Lexically Suggest, Logically Define: Quality Assurance of the Use of Qualifiers and Expected Results of Post-Coordination in Summary: )...

463

E-Print Network 3.0 - acute abdomen clinical Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

clinical Page: << < 1 2 3 4 5 > >> 1 Lexically Suggest, Logically Define: Quality Assurance of the Use of Qualifiers and Expected Results of Post-Coordination in Summary:...

464

E-Print Network 3.0 - acute medical problems Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Environmental Sciences and Ecology 4 Lexically Suggest, Logically Define: Quality Assurance of the Use of Qualifiers and Expected Results of Post-Coordination in Summary:...

465

NAQSAT National Air Quality Site Assessment Tool NAQSAT National Air Quality Site Assessment Tool  

E-Print Network [OSTI]

NAQSAT National Air Quality Site Assessment Tool NAQSAT National Air Quality Site Assessment Tool Air Quality Assessment Tool For Livestock Producers & Advisors #12;NAQSAT The National Air Quality Site Assessment Tool (NAQSAT) was developed for livestock producers and their advisors interested

466

Quality Assurance/Quality Control (QA/QC) Summary for the California Rivers and Streams Study  

E-Print Network [OSTI]

APPENDIX 1 Quality Assurance/Quality Control (QA/QC) Summary for the California Rivers and Streams Ambient Monitoring Program (SWAMP) Quality Assurance Program Plan (QAPrP) are outlined in the Rivers QAPP may arise so that corrective actions can be implemented. Quality control samples prepared and analyzed

467

The Waste Management Quality Assurance Implementing Management Plan (QAIMP)  

E-Print Network [OSTI]

DIVISION Waste Management Quality Assurance ImplementingI I IMPLEMENTING MANAGEMENT QUALITY PLAN ASSURANCE I lilillI WM-QAIMP Waste Management Quality Assurance Implementing

Albert editor, R.

2009-01-01T23:59:59.000Z

468

Distrbuted Sensing Systems for Water Quality Assesment and Management  

E-Print Network [OSTI]

Sensing Systems for Water Quality Assessment and ManagementSensing Systems for Water Quality Assessment and ManagementSensing Systems for Water Quality Assessment and Management

2007-01-01T23:59:59.000Z

469

Quality Assurance | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power Systems Engineering Research and DevelopmentDepartmentin DesignQuality Assurance

470

The high cost of low quality in R D (research and development)  

SciTech Connect (OSTI)

The principles of quality assurance and quality control yield high payoffs when applied to research activities. Researchers are usually highly motivated individuals who earnestly desire to produce excellent results. The nature of research and the temperament of researchers are such that considerable freedom and latitude are usually required so that the creative processes are not impeded. These are approaches that can be used in applying quality assurance and control that researchers will accept and use when they see the payoff. Some examples are given, with particular emphasis on quality cost systems applied to measurement processes in R D. 14 refs.

Wells, C.V.

1990-10-01T23:59:59.000Z

471

Review of power quality applications of energy storage systems  

SciTech Connect (OSTI)

Under the sponsorship of the US Department of Energy (DOE) Office of Utility Technologies, the Energy Storage Systems Analysis and Development Department at Sandia National Laboratories contracted Sentech, Inc., to assess the impact of power quality problems on the electricity supply system. This report contains the results of several studies that have identified the cost of power quality events for electricity users and providers. The large annual cost of poor power quality represents a national inefficiency and is reflected in the cost of goods sold, reducing US competitiveness. The Energy Storage Systems (ESS) Program takes the position that mitigation merits the attention of not only the DOE but affected industries as well as businesses capable of assisting in developing solutions to these problems. This study represents the preliminary stages of an overall strategy by the ESS Program to understand the magnitude of these problems so as to begin the process of engaging industry partners in developing solutions.

Swaminathan, S.; Sen, R.K. [Sentech, Inc., Bethesda, MD (United States)

1997-05-01T23:59:59.000Z

472

SAPHIRE 8 Software Quality Assurance Plan  

SciTech Connect (OSTI)

This Quality Assurance (QA) Plan documents the QA activities that will be managed by the INL related to JCN N6423. The NRC developed the SAPHIRE computer code for performing probabilistic risk assessments (PRAs) using a personal computer (PC) at the Idaho National Laboratory (INL) under Job Code Number (JCN) L1429. SAPHIRE started out as a feasibility study for a PRA code to be run on a desktop personal PC and evolved through several phases into a state-of-the-art PRA code. The developmental activity of SAPHIRE was the result of two concurrent important events: The tremendous expansion of PC software and hardware capability of the 90s and the onset of a risk-informed regulation era.

Curtis Smith

2010-02-01T23:59:59.000Z

473

Assessing the soil quality of long-term reclaimed wastewater-irrigated cropland  

E-Print Network [OSTI]

of the fields. Soil quality of the treated and control fields were compared using the principal components identified in this process. Results indicated that the soil quality might be evaluated by comparing the total), and zinc (Zn) of soils in the control and the treated fields. Except for the total porosity and Mg

Wang, Zhi "Luke"

474

Hedychium gardnerianum invasion into Hawaiian montane rainforest: interactions among litter quality,  

E-Print Network [OSTI]

-canopy forests and, despite inter-specific differences in litter quality and quantity between understory and domi strongly influenced by native species, which contribute the most to overall stand biomass. A negative a combination of litter quality and quantity (e.g., Ehrenfeld 2003), the results from these studies

Funk, Jennifer

475

GRACE-1: Cross-Layer Adaptation for Multimedia Quality and Battery Energy  

E-Print Network [OSTI]

GRACE-1: Cross-Layer Adaptation for Multimedia Quality and Battery Energy Wanghong Yuan, Member need to support multimedia quality with limited battery energy. To address this challenging problem laptop with the adaptive Athlon CPU, Linux-based OS, and video codecs. Our experimental results show that

Nahrstedt, Klara

476

Aquatic macroinvertebrates and water quality in Sandia Canyon  

SciTech Connect (OSTI)

In 1990, field studies of water quality and stream macroinvertebrate communities were initiated in Sandia Canyon at Los Alamos National Laboratory. The studies were designed to establish baseline data and to determine the effects of routine discharges of industrial and sanitary waste. Water quality measurements were taken and aquatic macroinvertebrates sampled at three permanent stations within the canyon. Two of the three sample stations are located where the stream regularly receives industrial and sanitary waste effluents. These stations exhibited a low diversity of macroinvertebrates and slightly degraded water quality. The last sample station, located approximately 0.4 km (0.25 mi) downstream from the nearest wastewater outfall, appears to be in a zone of recovery where water quality parameters more closely resemble those found in natural streams in the Los Alamos area. A large increase in macroinvertebrate diversity was also observed at the third station. These results indicate that effluents discharged into Sandia Canyon have a marked effect on water quality and aquatic macroinvertebrate communities.

Bennett, K.

1994-05-01T23:59:59.000Z

477

The South Wilmington Area remedial cost estimating methodology (RCEM) -- A planning tool and reality check for brownfield development  

SciTech Connect (OSTI)

The South Wilmington Area (SWA), which is comprised of 200 acres of multi-use urban lowlands adjacent to the Christina River, is a brownfields area that has been targeted for redevelopment/restoration as part of a major waterfront revitalization project for the City of Wilmington, Delaware. The vision for this riverfront development, which is being promoted by a state-funded development corporation, includes plans for a new harbor, convention and entertainment facilities, upscale residences, an urban wildlife refuge, and the restoration of the Christina River. However, the environmental quality of the SWA has been seriously impacted by an assortment of historic and current heavy industrial land-uses since the late 1800`s, and extensive environmental cleanup of this area will be required as part of any redevelopment plan. Given that the environmental cleanup cost will be a major factor in determining the overall economic feasibility of brownfield development in the SWA, a reliable means of estimating potential preliminary remedial costs, without the expense of costly investigative and engineering studies, was needed to assist with this redevelopment initiative. The primary chemicals-of-concern (COCs) area-wide are lead and petroleum compounds, however, there are hot-spot occurrences of polynuclear aromatic hydrocarbons (PAHs), PCBs, and other heavy metals such as arsenic and mercury.

Yancheski, T.B. [Tetra Tech, Inc., Christiana, DE (United States); Swanson, J.E. [Tetra Tech, Inc., Fairfax, VA (United States)

1996-12-31T23:59:59.000Z

478

National Coal Quality Inventory (NACQI)  

SciTech Connect (OSTI)

The U.S. Geological Survey (USGS) conducted the National Coal Quality Inventory (NaCQI) between 1999 and 2005 to address a need for quality information on coals that will be mined during the next 20-30 years. Collaboration between the USGS, State geological surveys, universities, coal burning utilities, and the coal mining industry plus funding support from the Electric Power Research Institute (EPRI) and the U.S. Department of Energy (DOE) permitted collection and submittal of coal samples for analysis. The chemical data (proximate and ultimate analyses; major, minor and trace element concentrations) for 729 samples of raw or prepared coal, coal associated shale, and coal combustion products (fly ash, hopper ash, bottom ash and gypsum) from nine coal producing States are included. In addition, the project identified a new coal reference analytical standard, to be designated CWE-1 (West Elk Mine, Gunnison County, Colorado) that is a high-volatile-B or high-volatile-A bituminous coal with low contents of ash yield and sulfur, and very low, but detectable contents of chlorine, mercury and other trace elements.

Robert Finkelman

2005-09-30T23:59:59.000Z

479

Search results | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

and high-quality form of energy with several potential applications besides producing heat and electricity. Today, scientists are developing systems that use concentrated...

480

FAPRI-UMC Report #01-07 Estimating Water Quality,  

E-Print Network [OSTI]

Carbon and Carbon Sequestration...................................10 CRP EffectsFAPRI-UMC Report #01-07 Estimating Water Quality, Air Quality, and Soil Carbon Benefits Quality, Air Quality, and Soil Carbon Benefits of the Conservation Reserve Program FAPRI-UMC Report #01

Note: This page contains sample records for the topic "quality check results" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Evolving treatment plan quality criteria from institution-specific experience  

SciTech Connect (OSTI)

Purpose: The dosimetric aspects of radiation therapy treatment plan quality are usually evaluated and reported with dose volume histogram (DVH) endpoints. For clinical practicality, a small number of representative quantities derived from the DVH are often used as dose endpoints to summarize the plan quality. National guidelines on reference values for such quantities for some standard treatment approaches are often used as acceptance criteria to trigger treatment plan review. On the other hand, treatment prescription and planning approaches specific to each institution warrants the need to report plan quality in terms of practice consistency and with respect to institution-specific experience. The purpose of this study is to investigate and develop a systematic approach to record and characterize the institution-specific plan experience and use such information to guide the design of plan quality criteria. In the clinical setting, this approach will assist in (1) improving overall plan quality and consistency and (2) detecting abnormal plan behavior for retrospective analysis. Methods: The authors propose a self-evolving methodology and have developed an in-house prototype software suite that (1) extracts the dose endpoints from a treatment plan and evaluates them against both national standard and institution-specific criteria and (2) evolves the statistics for the dose endpoints and updates institution-specific criteria. Results: The validity of the proposed methodology was demonstrated with a database of prostate stereotactic body radiotherapy cases. As more data sets are accumulated, the evolving institution-specific criteria can serve as a reliable and stable consistency measure for plan quality and reveals the potential use of the ''tighter'' criteria than national standards or projected criteria, leading to practice that may push to shrink the gap between plans deemed acceptable and the underlying unknown optimality. Conclusions: The authors have developed a rationale to improve plan quality and consistency, by evolving the plan quality criteria from institution-specific experience, complementary to national standards. The validity of the proposed method was demonstrated with a prototype system on prostate stereotactic body radiotherapy (SBRT) cases. The current study uses direct and indirect DVH endpoints for plan quality evaluation, but the infrastructure proposed here applies to general outcome data as well. The authors expect forward evaluation together with intelligent update based on evidence-based learning, which will evolve the clinical practice for improved efficiency, consistency, and ultimately better treatment outcome.

Ruan, D.; Shao, W.; DeMarco, J.; Tenn, S.; King, C.; Low, D.; Kupelian, P.; Steinberg, M. [Department of Radiation Oncology, University of California, Los Angeles, California 90095 (United States)

2012-05-15T23:59:59.000Z

482

QUALITY ASSURANCE EXCHANGE July 2005 Volume 1 Issue 1  

Broader source: Energy.gov [DOE]

QUALITY ASSURANCE EXCHANGE July 2005 Volume 1 Issue 1 US Department of Energy, Office of Quality Assurance Programs (EH-31)

483

JRF (Quality, Reliability and Operations Research): 2013 INDIAN STATISTICAL INSTITUTE  

E-Print Network [OSTI]

Research, (E) Quality Management and Systems and (F) Mathematics. A broad coverage for each of the above), Queuing theory (M/M/s), Game theory (two person zero-sum game). E. Quality Management and Systems: Quality, Quality planning, Quality costs, Total qual- ity management, Six sigma, Quality management system concepts

Bandyopadhyay, Antar

484

Process-Based Quality (PBQ) Tools Development  

SciTech Connect (OSTI)

The objective of this effort is to benchmark the development of process-based quality tools for application in CAD (computer-aided design) model-based applications. The processes of interest are design, manufacturing, and quality process applications. A study was commissioned addressing the impact, current technologies, and known problem areas in application of 3D MCAD (3-dimensional mechanical computer-aided design) models and model integrity on downstream manufacturing and quality processes. The downstream manufacturing and product quality processes are profoundly influenced and dependent on model quality and modeling process integrity. The goal is to illustrate and expedite the modeling and downstream model-based technologies for available or conceptual methods and tools to achieve maximum economic advantage and advance process-based quality concepts.

Cummins, J.L.

2001-12-03T23:59:59.000Z

485

Managerial information behaviour: Relationships among Total Quality Management orientation, information use environments, and managerial roles  

E-Print Network [OSTI]

Total Quality Control and Total Quality Learning In order tototal quality control (TQC) and total quality learning (Structure Total Quality Control and organizational

Simard, C; Rice, Ronald E

2006-01-01T23:59:59.000Z

486

First Results of the LHC Longitudinal Density Monitor  

SciTech Connect (OSTI)

The Large Hadron Collider (LHC) at CERN is the world's largest particle accelerator. It is designed to accelerate and collide protons or heavy ions up to the center-of-mass energies of 14 TeV. Knowledge of the longitudinal distribution of particles is important for various aspects of accelerator operation, in particular to check the injection quality and to measure the proportion of charge outside the nominally filled bunches during the physics periods. In order to study this so-called ghost charge at levels very much smaller than the main bunches, a longitudinal profile measurement with a very high dynamic range is needed. A new detector, the LHC Longitudinal Density Monitor (LDM) is a single-photon counting system measuring synchrotron light by means of an avalanche photodiode detector. The unprecedented energies reached in the LHC allow synchrotron light diagnostics to be used with both protons and heavy ions. A prototype was installed during the 2010 LHC run and was able to longitudinally profile the whole ring with a resolution close to the target of 50 ps. On-line correction for the effects of the detector deadtime, pile-up and afterpulsing allow a dynamic range of 105 to be achieved. First measurements with the LDM are presented here along with an analysis of its performance and an outlook for future upgrades.

Jeff, A.; /CERN /Liverpool U.; Boccardi, A.; /CERN; Bravin, E.; /CERN; Fisher, A.S.; /SLAC; Lefevre, T.; /CERN; Rabiller, A.; /CERN; Roncarolo, F.; /CERN; Welsch, C.P.; /Liverpool U. /Cockcroft Inst. Accel. Sci. Tech.

2012-04-19T23:59:59.000Z

487

First measurements results of the LHC longitudinal density monitor  

E-Print Network [OSTI]

Knowledge of the longitudinal distribution of particles is important for various aspects of accelerator operation, for example to check the injection quality and to characterize the development of ghost bunches before and during the physics periods. A new detector, the LHC Longitudinal Density Monitor (LDM) is a single-photon counting system measuring synchrotron light by means of an avalanche photodiode detector. The unprecedented energies reached in the LHC allow synchrotron light diagnostics to be used with both protons and heavy ions. The LDM is able to longitudinally profile the whole ring with a resolution close to the target of 50 ps. On-line correction for the effects of the detector deadtime, pile-up and afterpulsing allow a dynamic range of 105 to be achieved. The LDM operated during the 2010 lead ion run and during 2011 with protons. Measurements from both runs are presented in this contribution along with an analysis of the LDM performance and an outlook for future upgrades.

Jeff , A; Bravin, E; Boccardi, A; Bozyigit, S; Lefevre, T; Rabiller, A; Roncarolo, F; Welsch, C P; Fisher, A S

2011-01-01T23:59:59.000Z

488

Water Quality Program, Volume 1 (Alabama)  

Broader source: Energy.gov [DOE]

This volume of the water quality program mainly deals with the National Pollutant Discharge Elimination System. National Pollutant Discharge Elimination System" or "(NPDES)" means the national...

489

Regulations for Air Quality (Quebec, Canada)  

Broader source: Energy.gov [DOE]

This Regulation establishes emission standards for particulates and gases, emission opacity standards, standards of air quality and control measures to prevent, eliminate or reduce the emission of...

490

Water Quality Program, Volume 2 (Alabama)  

Broader source: Energy.gov [DOE]

This volume of the water quality program mainly deals with Technical Standards, Corrective Action Requirements and Financial Responsibility for Owners and Operators of Underground Storage Tanks....

491

Microgrids and Heterogeneous Power Quality and Reliability  

E-Print Network [OSTI]

high security, quality, reliability, and availability”, IEEELave, and Marija Ilic: “Creating Reliability Choice: HowBuilding Less Reliability into Electric Power Grids Could

Marnay, Chris

2008-01-01T23:59:59.000Z

492

BUILDING VENTILATION AND INDOOR AIR QUALITY  

E-Print Network [OSTI]

monoxide and nitrogen dioxide from gas appliances;health, indoor air quality, nitrogen dioxide, radon The workin residen- (CO), nitrogen dioxide (NOz), formaldehyde (

Hollowell, C.D.

2012-01-01T23:59:59.000Z

493

Montana Water Quality Permit Application, Nondegradation Authorization...  

Open Energy Info (EERE)

LibraryAdd to library PermittingRegulatory Guidance - Supplemental Material: Montana Water Quality Permit Application, Nondegradation Authorization, and Permit FeesPermitting...

494

Quality assurance in small plating shops  

SciTech Connect (OSTI)

The potential for electroless nickel coatings in oilfield and petrochemical applications is quite high. The greatest obstacle to their use has been a reputation for poor quality due to a lack of quality control in many plating shops. To overcome this, electroless nickel shops should not only have a quality control program in their operation, but must also document its use and success. This article describes how a plating shoe can develop the necessary procedures, manuals, and paperwork trail to offer quality assurance and to satisfy customers.

McNabb, W.J. (Electroless Nickel Plating of Louisiana, Hammond, LA (United States))

1993-10-01T23:59:59.000Z

495

Arizona Department of Environmental Quality's Application Forms...  

Open Energy Info (EERE)

search OpenEI Reference LibraryAdd to library Web Site: Arizona Department of Environmental Quality's Application Forms and Guidance Website Abstract This site contains forms...

496

Council on Environmental Quality - Regulations for Implementing...  

Open Energy Info (EERE)

OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: Council on Environmental Quality - Regulations for Implementing the Procedural Provisions of the NEPALegal...

497

SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Project Tracking...  

Office of Environmental Management (EM)

Project Tracking Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Project Tracking Checklist The following checklist is intended to provide system owners, project...

498

SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Project Planning...  

Broader source: Energy.gov (indexed) [DOE]

PROGRAM: Project Planning Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Project Planning Checklist The following checklist is intended to provide system owners, project...

499

SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM : Acceptance Checklist...  

Broader source: Energy.gov (indexed) [DOE]

PROGRAM : Acceptance Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM : Acceptance Checklist The following checklist is intended to provide system owners, project managers,...

500

Quality Assurance Specialist (Safety Software Qualtiy Assurance)  

Broader source: Energy.gov [DOE]

A successful candidate in this position performs safety software quality assurance oversight of all activities that support the Waste Isolation Pilot Plant (WIPP) compliance with environmental,...