Powered by Deep Web Technologies
Note: This page contains sample records for the topic "qc quality control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Users manual for SERI QC software assessing the quality of solar radiation data  

DOE Green Energy (OSTI)

This manual describes the procedures and software for assessing the quality of solar radiation data. This does not constitute quality control because quality control must take place during the preparations for data collection (selection, calibration, and installation of instruments), during the measurement process, and during the transmission (if any) and recording of the numerical values. Once the data are recorded, only quality assessment can be performed. If quality assessment is performed in real time or soon after the measurement process is completed, it can provide input to control the quality of future measurements. Furthermore, quality assessment can be used for quality control if data judged to be bad are deleted and/or modified. We do not subscribe to these actions because the deletion or modification of data destroys information that might be useful to the user. For example, if an instrument has gone through a gradual failure and all of the data that fail quality assessment criteria are deleted or modified, the user of the data may not be able to detect what was happening and will not question the accuracy of other data collected before the instrument completely failed. Therefore, the SERI QC procedures and software do not delete or modify data. Instead, flags are set to inform the user of any departure of the data from expected values. These flags indicate the magnitude and direction of such departures. For the flags to communicate as much information as possible, this manual attempts to identify and explain the probable causes of various flags. However, we cannot overemphasize the following: Flags only indicate that data do or do not fall within expected ranges. This does not mean that the data that the data are or are not valid.

none,

1993-12-01T23:59:59.000Z

2

Data Quality Control Based on Self-Consistency  

Science Conference Proceedings (OSTI)

Conducting meteorological measurements, one is always confronted with a wide variety of different types of errors and with the decision of how to correct data for further use, if necessary. The selection of an adequate quality control (QC) ...

Reinhold Steinacker; Dieter Mayer; Andrea Steiner

2011-12-01T23:59:59.000Z

3

Quality control: artifacts, visualization, QC as residual analysis  

E-Print Network (OSTI)

.00.20.40.60.81.0 41 (a42-u07639vene.txt) by spotting pin log(fg.green/fg.red) F ^ 1:1 1:2 1:3 1:4 2:1 2:2 2:3 2:4 3 - additive-multiplicative error model with affine chip- und pin-effects - Li-Wing model with probe

Spang, Rainer

4

graphicsQC-package Quality Control for Graphics Description Details  

E-Print Network (OSTI)

Description The package provides functions to generate graphics files, compare them with “model” files, and report the results. License GPL-2

Stephen Gardiner; Paul Murrell; Maintainer Paul Murrell; Stephen Gardiner

2009-01-01T23:59:59.000Z

5

Quality Controlling Surf Zone Acoustic Doppler Velocimeter Observations to Estimate the Turbulent Dissipation Rate  

Science Conference Proceedings (OSTI)

High-quality measurements of the turbulent dissipation rate ? are required to diagnose field surf-zone turbulence budgets. Quality control (QC) methods are presented for estimating surf zone ? with acoustic Doppler velocimeter (ADV) data. Bad ADV ...

Falk Feddersen

2010-12-01T23:59:59.000Z

6

The Man–Machine Mix in Operational Product Quality Control and Verification at Fleet Numerical Oceanography Center  

Science Conference Proceedings (OSTI)

The Quality Control (QC) Division of the U.S. Navy's Fleet Numerical Oceanography Center (FNOC) is responsible for the quality control of meteorological and oceanographic analyses and forecasts issued to operational users, and for the ...

William M. Clune; Patrick A. Harr; L. Robin Brody

1992-06-01T23:59:59.000Z

7

Ex H (Rev. 7) Exhibit H Quality Assurance Requirements  

NLE Websites -- All DOE Office Websites (Extended Search)

Ex H (Rev. 7) Exhibit H Quality Assurance Requirements Ex H (Rev. 7) Exhibit H Quality Assurance Requirements Dated: 3-25-13 Subcontract No. 241314 Page 1 of 6 EXHIBIT "H" QUALITY ASSURANCE REQUIREMENTS TABLE OF CONTENTS QC Title Page QC-02 DESIGN/CHANGE CONTROL FOR SUBCONTRACTOR PROVIDED DESIGN (May 2008) . 2 QC-06 CERTIFICATE OF CONFORMANCE (Standard) (May 2012) .................................................. 2 QC-07 MANUFACTURING, INSPECTION AND TEST PROCEDURES (Jun 2011) ........................... 2 QC-08 INSPECTION, EXAMINATION, AND TEST REPORTS (Sept 2011) ....................................... 2 QC-11 ENGINEERING DRAWINGS (Sept 2011) ................................................................................. 2

8

Quality Control Algorithms for the Kennedy Space Center 50-MHz Doppler Radar Wind Profiler Winds Database  

Science Conference Proceedings (OSTI)

This paper presents the process used by the Marshall Space Flight Center Natural Environments Branch (EV44) to quality control (QC) data from the Kennedy Space Center’s 50-MHz Doppler radar wind profiler (DRWP) for use in vehicle wind loads and ...

Robert E. Barbré Jr.

2012-12-01T23:59:59.000Z

9

QC Solar Suzhou Corporation | Open Energy Information  

Open Energy Info (EERE)

QC Solar Suzhou Corporation QC Solar Suzhou Corporation Jump to: navigation, search Name QC Solar (Suzhou Corporation) Place Suzhou, Jiangsu Province, China Zip 215123 Sector Solar Product Suzhou-based solar PV electronics manufacturing firm. Coordinates 31.3092°, 120.613121° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":31.3092,"lon":120.613121,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

10

Developing High-Quality Field Program Sounding Datasets  

Science Conference Proceedings (OSTI)

Enormous resources of time, effort, and finances are expended in collecting field program rawinsonde (sonde) datasets. Correcting the data and performing quality control (QC) in a timely fashion after the field phase of an experiment are important for ...

Paul E. Ciesielski; Patrick T. Haertel; Richard H. Johnson; Junhong Wang; Scot M. Loehrer

2012-03-01T23:59:59.000Z

11

Unique QA/QC requirements for analytical chemistry at LANL  

Science Conference Proceedings (OSTI)

One of the missions of group NMT-1 (Nuclear Materials Technology Division/Analytical Chemistry) at Los Alamos National Laboratory (LANL) is to provide analysis of both radioactive and nonradioactive materials to address the stockpile stewardship needs of the US Department of Energy (DOE). Trace to high levels of various constituents are measured using traditional analytical methods and state-of-the-art instrumental methods. The capabilities include Pu and U assay, wet chemistry, plasma spectroscopy, mass spectrometry radiochemistry, X-ray fluorescence, anion and cation analysis, special standards preparation, surface analysis, and gas analysis. The authors are currently developing and implementing a plan to independently assess the quality of the analytical data produced by NMT-1. Nuclear materials of a matrix similar to the client`s samples but having different concentration levels of analytes that are representative of the client`s samples will be used. Well-characterized, stable, homogeneous materials have been identified as possible candidates for single-blind quality control (QC) samples. These materials include Pu metal, Pu oxide, U metal, U oxide, and U-Pu mixed oxide (MOX) with varying degrees of purity. These single-blind samples will be periodically distributed along with regular client samples to be analyzed by the aforementioned analytical methods.

Tandon, L.; Gautier, M.A.; Hammond, C.F.; Porterfield, D.R. [Los Alamos National Lab., NM (United States)

1998-12-31T23:59:59.000Z

12

Unique QA/QC requirements for analytical chemistry at LANL  

Science Conference Proceedings (OSTI)

One of the missions of group NMT-1 (Nuclear Materials Technology Division/Analytical Chemistry) at Los Alamos National Laboratory (LANL) is to provide analysis of both radioactive and nonradioactive materials to address the stockpile stewardship needs of the US Department of Energy (DOE). Trace to high levels of various constituents are measured using traditional analytical methods and state-of-the-art instrumental methods. Capabilities include Pu and U assay, wet chemistry, plasma spectroscopy, mass spectrometry radiochemistry, x-ray fluorescence, anion and cation analysis, special standards preparation, surface analysis, and gas analysis. The authors are currently developing and implementing a plan to independently assess the quality of the analytical data produced by NMT-1. Nuclear materials of a matrix similar to the client`s samples but having different concentration levels of analytes that are representative of the client`s samples will be used. Well-characterized, stable, homogeneous materials have been identified as possible candidates for single-blind quality control (QC) samples. These materials include Pu metal, Pu oxide, uranium metal, uranium oxide, and uranium-plutonium mixed oxide with varying degrees of purity. These single-blind samples will be periodically distributed along with regular client samples to be analyzed by the above mentioned analytical methods.

Tandon, L.; Gautier, M.A.; Hammond, C.F.; Porterfield, D.R.

1998-12-31T23:59:59.000Z

13

Water Quality Control (Texas) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Control (Texas) Water Quality Control (Texas) Eligibility Utility Fed. Government Commercial Agricultural Investor-Owned Utility StateProvincial Govt Industrial Construction...

14

Results of the Excreta Bioassay Quality Control Program for April 1, 2009 through March 31, 2010  

SciTech Connect

A total of 58 urine samples and 10 fecal samples were submitted during the report period (April 1, 2009 through March 31, 2010) to General Engineering Laboratories, South Carolina by the Hanford Internal Dosimetry Program (IDP) to check the accuracy, precision, and detection levels of their analyses. Urine analyses for Sr, 238Pu, 239Pu, 241Am, 243Am 235U, 238U, elemental uranium and fecal analyses for 241Am, 238Pu and 239Pu were tested this year as well as four tissue samples for 238Pu, 239Pu, 241Am and 241Pu. The number of QC urine samples submitted during the report period represented 1.3% of the total samples submitted. In addition to the samples provided by IDP, GEL was also required to conduct their own QC program, and submit the results of analyses to IDP. About 33% of the analyses processed by GEL during the third year of this contract were quality control samples. GEL tested the performance of 21 radioisotopes, all of which met or exceeded the specifications in the Statement of Work within statistical uncertainty (Table 4).

Antonio, Cheryl L.

2012-07-19T23:59:59.000Z

15

Results of The Excreta Bioassay Quality Control Program For April 1, 2010 Through March 31, 2011  

Science Conference Proceedings (OSTI)

A total of 76 urine samples and 10 spiked fecal samples were submitted during the report period (April 1, 2010 through March 31, 2011) to GEL Laboratories, LLC in South Carolina by the Hanford Internal Dosimetry Program (IDP) to check the accuracy, precision, and detection levels of their analyses. Urine analyses for 14C, Sr, for 238Pu, 239Pu, 241Am, 243Am, 235U, 238U, 238U-mass and fecal analyses for 241Am, 238Pu and 239Pu were tested this year. The number of QC urine samples submitted during the report period represented 1.1% of the total samples submitted. In addition to the samples provided by IDP, GEL was also required to conduct their own QC program, and submit the results of analyses to IDP. About 31% of the analyses processed by GEL during the first year of contract 112512 were quality control samples. GEL tested the performance of 23 radioisotopes, all of which met or exceeded the specifications in the Statement of Work within statistical uncertainty except the slightly elevated relative bias for 243,244Cm (Table 4).

Antonio, Cheryl L.

2012-07-19T23:59:59.000Z

16

INVENTORY AND REVIEW OF QUALITY ASSURANCE/QUALITY CONTROL  

E-Print Network (OSTI)

.................................................................................................7 2.4 Glossary of Terms Glossary of terms APPENDIX F Bibliography APPENDIX G Database Literature Search #12;1 1.0 INTRODUCTION sampling, laboratory analyses, and data management). 4. To prepare a glossary of QA/QC terminology

17

NREL Job Task Analysis: Quality Control Inspector  

SciTech Connect

A summary of job task analyses for the position of quality control inspector when evaluating weatherization work that has been done on a residence.

Kurnik, C.; Woodley, C.

2011-05-01T23:59:59.000Z

18

CBT -LOQCAP (Lube Oil QC Assessment Process) Version 1.0  

Science Conference Proceedings (OSTI)

This Lube Oil QC Assessment Process (LOQCAP) version 1.0 computer-based training software provides the user with the fundamental skills for implementation of the Lube Oil PdM, Handling, and Quality Assurance Guideline, Final Report. This computer-based training is to be used as a companion to the Lube Oil Predictive Maintenance, Handling, and Quality Assurance Guideline developed by Program 69. The training provides the basic knowledge for using the guideline to assess your lubrication program through th...

2004-12-08T23:59:59.000Z

19

The Development of QC Standards for ARM Data Products  

SciTech Connect

While the overall object of the Atmospheric Radiation Measurement (ARM) program, to study cloud formation processes and their influence on radiative transfer, has not changed since the program’s inception in 1992 [1], the challenges associated with and the methods applied to ensure ARM data is of “known and reasonable” quality have evolved as the program has matured. This paper describes an effort initiated in 2005 to create standards to guide the creation, formatting, and assessment of QC in ARM Value-Added Products (VAPs). It includes background on the motivation and process for creating the standards, a description of the requirements defined to guide the development of the standards, the standards themselves, and tools created to verify VAP data products properly adhere to the standards.

Gaustad, Krista L.; Flynn, Connor J.; Beus, Sherman J.; Ermold, Brian D.

2010-06-20T23:59:59.000Z

20

Ventilation Controller for Improved Indoor Air Quality  

Iain Walker and colleagues at Berkeley Lab have developed a dynamic control system for whole-house ventilation fans that provides maximal air quality while reducing by 18-44% the energy spent on ventilation. The system, the Residential Integrated ...

Note: This page contains sample records for the topic "qc quality control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Quality control during construction of power plants  

SciTech Connect

This paper traces the background and examines the necessity for a program to control quality during the construction phase of a power plant. It also attempts to point out considerations for making these programs cost effective.

Hartstern, R.F.

1982-03-01T23:59:59.000Z

22

Complex Quality Control of Meteorological Observations  

Science Conference Proceedings (OSTI)

A survey of the so-called complex quality control (CQC) of meteorological information is presented. The principles of the CQC approach are formulated. The CQC of rawinsonde height and temperature data at mandatory isobaric surfaces is described ...

Lev S. Gandin

1988-05-01T23:59:59.000Z

23

Quality Control of Large Argo Datasets  

Science Conference Proceedings (OSTI)

Argo floats have significantly improved the observation of the global ocean interior, but as the size of the database increases, so does the need for efficient tools to perform reliable quality control. It is shown here how the classical method ...

Fabienne Gaillard; Emmanuelle Autret; Virginie Thierry; Philippe Galaup; Christine Coatanoan; Thomas Loubrieu

2009-02-01T23:59:59.000Z

24

Colorado Water Quality Control Act | Open Energy Information  

Open Energy Info (EERE)

Water Quality Control Act Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Reference Material: Colorado Water Quality Control Act edit Details Activities (0) Areas...

25

Vermont Air Pollution Control Regulations, Ambient Air Quality...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Ambient Air Quality Standards (Vermont) Vermont Air Pollution Control Regulations, Ambient Air Quality Standards (Vermont) Eligibility Utility Agricultural Investor-Owned Utility...

26

On power quality control center for providing unbundled power quality services.  

E-Print Network (OSTI)

??Using Power Quality Control Center (PQCC) to provide unbundled power quality services is investigated in this thesis. It begins with a detailed analysis of the… (more)

Zhan, Yanqin.

2008-01-01T23:59:59.000Z

27

Automatic Minimum and Maximum Alarm Thresholds for Quality Control  

Science Conference Proceedings (OSTI)

Automated quality control is a necessity for meteorological measurement networks because of an ever-increasing number of measurements. One of the basic quality control tests is to check that the observations fall into a range of acceptable ...

Vesa Hasu; Ari Aaltonen

2011-01-01T23:59:59.000Z

28

Quality Control for the Navy Operational Atmospheric Database  

Science Conference Proceedings (OSTI)

A new, operational meteorological database has been developed to provide quality-controlled observations for the atmospheric analysis and prediction systems at Fleet Numerical Oceanography Center (FNOC). The quality control procedures for the ...

Nancy L. Baker

1992-06-01T23:59:59.000Z

29

Complex Quality Control of Significant Level Rawinsonde Temperatures  

Science Conference Proceedings (OSTI)

Rawinsonde heights and temperatures have been quality controlled using complex quality control at the National Centers for Atmospheric Prediction since December 1988 when an algorithm using only hydrostatic checking was introduced for the ...

William G. Collins

1998-02-01T23:59:59.000Z

30

2013 Short Course Analytical Techniques: Quality Control, Process Control, and Refinery Optimization  

Science Conference Proceedings (OSTI)

Analytical Techniques: Quality Control, Process Control, and Refinery Optimization held at the 104th AOCS Annual Meeting and Expo. 2013 Short Course Analytical Techniques: Quality Control, Process Control, and Refinery Optimization Analytical Techn

31

Software Quality Assurance Control of Existing Systems  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2.01.00 - 2002 2.01.00 - 2002 Software Quality Assurance Control of Existing Systems September 2002 United States Department of Energy Albuquerque Operations Office Abstract Existing software systems often represent significant investments and play important roles in the every day businesses of organizations. Many of these systems are experiencing support problems. To meet current and future operational needs, organizations need to plan how best to address these support issues. Some of the issues to consider are presented in this document with references to related standards for further detailed examination. Two tutorials, one based on software maintenance and another detailing a baseline recovery strategy are included. SQA Control of Existing Systems SQAS22.01.00-2002

32

Georgia Water Quality Control Act (Georgia) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Georgia Water Quality Control Act (Georgia) Georgia Water Quality Control Act (Georgia) Georgia Water Quality Control Act (Georgia) < Back Eligibility Agricultural Commercial Construction Developer Fuel Distributor Industrial Installer/Contractor Investor-Owned Utility Municipal/Public Utility Rural Electric Cooperative Systems Integrator Transportation Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Georgia Program Type Environmental Regulations Siting and Permitting Provider Georgia Department of Natural Resources The Georgia Water Quality Control Act (WQCA) is a set of environmental regulations and permitting requirements that comply with the federal Clean Water Act. The Georgia Water Quality Control Act is enforced by the Georgia

33

Georgia Air Quality Control Act (Georgia) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Air Quality Control Act (Georgia) Air Quality Control Act (Georgia) Georgia Air Quality Control Act (Georgia) < Back Eligibility Agricultural Commercial Construction Developer Fuel Distributor Industrial Installer/Contractor Investor-Owned Utility Municipal/Public Utility Retail Supplier Rural Electric Cooperative Systems Integrator Transportation Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Georgia Program Type Climate Policies Environmental Regulations Provider Georgia Department of Natural Resources The Georgia Air Quality Control Act (AQCA) is a set of environmental regulations, permitting requirements, and air quality standards that control the amount of pollutants emitted and who emits them. The AQCA

34

Nuclear Energy Research Initiative Project No. 02 103 Innovative Low Cost Approaches to Automating QA/QC of Fuel Particle Production Using On Line Nondestructive Methods for Higher Reliability Final Project Report  

SciTech Connect

This Nuclear Energy Research Initiative (NERI) project was tasked with exploring, adapting, developing and demonstrating innovative nondestructive test methods to automate nuclear coated particle fuel inspection so as to provide the United States (US) with necessary improved and economical Quality Assurance and Control (QA/QC) that is needed for the fuels for several reactor concepts being proposed for both near term deployment [DOE NE & NERAC, 2001] and Generation IV nuclear systems. Replacing present day QA/QC methods, done manually and in many cases destructively, with higher speed automated nondestructive methods will make fuel production for advanced reactors economically feasible. For successful deployment of next generation reactors that employ particle fuels, or fuels in the form of pebbles based on particles, extremely large numbers of fuel particles will require inspection at throughput rates that do not significantly impact the proposed manufacturing processes. The focus of the project is nondestructive examination (NDE) technologies that can be automated for production speeds and make either: (I) On Process Measurements or (II) In Line Measurements. The inspection technologies selected will enable particle “quality” qualification as a particle or group of particles passes a sensor. A multiple attribute dependent signature will be measured and used for qualification or process control decisions. A primary task for achieving this objective is to establish standard signatures for both good/acceptable particles and the most problematic types of defects using several nondestructive methods.

Ahmed, Salahuddin; Batishko, Charles R.; Flake, Matthew; Good, Morris S.; Mathews, Royce; Morra, Marino; Panetta, Paul D.; Pardini, Allan F.; Sandness, Gerald A.; Tucker, Brian J.; Weier, Dennis R.; Hockey, Ronald L.; Gray, Joseph N.; Saurwein, John J.; Bond, Leonard J.; Lowden, Richard A.; Miller, James H.

2006-02-28T23:59:59.000Z

35

Passive ventilation for residential air quality control  

SciTech Connect

Infiltration has long served the residential ventilation needs in North America. In Northern Europe it has been augmented by purpose-provided natural ventilation systems--so-called passive ventilation systems--to better control moisture problems in dwellings smaller than their North American counterparts and in a generally wetter climate. The growing concern for energy consumption, and the environmental impacts associated with it, has however led to tighter residential construction standards on both continents and as a result problems associated with insufficient background ventilation have surfaced. Can European passive ventilation systems be adapted for use in North American dwellings to provide general background ventilation for air quality control? This paper attempts to answer this question. The configuration, specifications and performance of the preferred European passive ventilation system--the passive stack ventilation (PSV) system--will be reviewed; innovative components and system design strategies recently developed to improve the traditional PSV system performance will be outlined; and alternative system configurations will be presented that may better serve the climatic extremes and more urban contexts of North America. While these innovative and alternative passive ventilation systems hold great promise for the future, a rational method to size the components of these systems to achieve the control and precision needed to meet the conflicting constraints of new ventilation and air tightness standards has not been forthcoming. Such a method will be introduced in this paper and an application of this method will be presented.

Axley, J.

1999-07-01T23:59:59.000Z

36

DOE Joint Genome Institute: DOE JGI Produces New QC Tool for Microbial  

NLE Websites -- All DOE Office Websites (Extended Search)

May 24, 2010 May 24, 2010 DOE JGI Produces New QC Tool for Microbial Genomes WALNUT CREEK, CA-More than a thousand microbial genomes have been sequenced at various sequencing centers in the past 15 years to better understand their roles in tasks ranging from bioenergy to health to environmental cleanup. Conservative estimates suggest roughly 10,000 microbial genomes will be publicly available within the next two years, but genomic standards have not caught up with the technological advances that have made the sequencing process faster and cheaper. As a result, the torrent of DNA sequences being released has varying levels of quality, which impacts researchers' ability to use this information. To assist in checking the quality of the microbial genomic DNA sequences generated before they are submitted to the federally funded public archive

37

APPLICATION OF MATHEMATICAL PROGRAMMING MODELS TO COAL QUALITY CONTROL.  

E-Print Network (OSTI)

??The problem of utilizing blending techniques to control coal quality at the production-consumption phase is considered. Three blending models were developed to provide coal of… (more)

BAAFI, ERNEST YAW.

1983-01-01T23:59:59.000Z

38

ARM: Surface Radiation Measurement Quality Control testing, including climatologically configurable limits  

DOE Data Explorer (OSTI)

Surface Radiation Measurement Quality Control testing, including climatologically configurable limits

Gary Hodges; Tom Stoffel; Mark Kutchenreiter; Bev Kay; Aron Habte; Michael Ritsche; Victor Morris; Mary Anderberg

39

Software Quality Assurance Control of Existing Systems | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Software Quality Assurance Control of Existing Systems Software Quality Assurance Control of Existing Systems Software Quality Assurance Control of Existing Systems Existing software systems often represent significant investments and play important roles in the every day businesses of organizations. To meet current and future operational needs, organizations need to plan how best to address these support issues. Some of the issues to consider are presented in this document with references to related standards for further detailed examination. Two tutorials, one based on software maintenance and another detailing a baseline recovery strategy are included Software Quality Assurance Control of Existing Systems More Documents & Publications Software Quality Assurance Control of Existing Systems Software Quality: A Guide to Responsibilities and Resources, SQAS

40

Engineering Applications of Artificial Intelligence 16 (2003) 237250 Hierarchical decision making for proactive quality control: system  

E-Print Network (OSTI)

and error in troubleshooting is a usual practice. In this paper, we introduce a proactive QC approach

Huang, Yinlun

Note: This page contains sample records for the topic "qc quality control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

NIF Projects Controls and Information Systems Software Quality Assurance Plan  

SciTech Connect

Quality achievement for the National Ignition Facility (NIF) and the National Ignition Campaign (NIC) is the responsibility of the NIF Projects line organization as described in the NIF and Photon Science Directorate Quality Assurance Plan (NIF QA Plan). This Software Quality Assurance Plan (SQAP) is subordinate to the NIF QA Plan and establishes quality assurance (QA) activities for the software subsystems within Controls and Information Systems (CIS). This SQAP implements an activity level software quality assurance plan for NIF Projects as required by the LLNL Institutional Software Quality Assurance Program (ISQAP). Planned QA activities help achieve, assess, and maintain appropriate quality of software developed and/or acquired for control systems, shot data systems, laser performance modeling systems, business applications, industrial control and safety systems, and information technology systems. The objective of this SQAP is to ensure that appropriate controls are developed and implemented for management planning, work execution, and quality assessment of the CIS organization's software activities. The CIS line organization places special QA emphasis on rigorous configuration control, change management, testing, and issue tracking to help achieve its quality goals.

Fishler, B

2011-03-18T23:59:59.000Z

42

Software Quality Assurance Control of Existing Systems | Department of  

NLE Websites -- All DOE Office Websites (Extended Search)

Assurance Control of Existing Systems Assurance Control of Existing Systems Software Quality Assurance Control of Existing Systems Existing software systems often represent significant investments and play important roles in the every day businesses of organizations. To meet current and future operational needs, organizations need to plan how best to address these support issues. Some of the issues to consider are presented in this document with references to related standards for further detailed examination. Two tutorials, one based on software maintenance and another detailing a baseline recovery strategy are included Software Quality Assurance Control of Existing Systems More Documents & Publications Software Quality Assurance Control of Existing Systems Software Quality: A Guide to Responsibilities and Resources, SQAS

43

Water Quality Control Act (Tennessee) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

You are here You are here Home » Water Quality Control Act (Tennessee) Water Quality Control Act (Tennessee) < Back Eligibility Agricultural Commercial Construction Developer Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Municipal/Public Utility Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Tennessee Program Type Environmental Regulations Siting and Permitting Provider Tennessee Department Of Environment and Conservation The Water Quality Control Act (WQCA) establishes the water pollution

44

Power quality control on the Romanian energy market  

Science Conference Proceedings (OSTI)

Power quality is one of the important objectives of the transmission and distribution network. The paper presents several aspects of the PQ monitoring interface between the transmission network and the distribution network. 110 kV voltage level, in view ... Keywords: control, energy market, power quality

A. S. Jude; P. Ehegardner; P. Andea; D. Vatau; F. M. Frigura-Iliasa

2009-05-01T23:59:59.000Z

45

Comprehensive Hydrostatic Quality Control at the National Meteorological Center  

Science Conference Proceedings (OSTI)

The Comprehensive Hydrostatic Quality Control (CHQC) of rawinsonde data on height and temperature at mandatory isobaric surfaces designed and implemented at the National Meteorological Center in Washington is described in detail. Main principles ...

William G. Collins; Lev S. Gandin

1990-12-01T23:59:59.000Z

46

Quality Control and Verification of Weather Radar Wind Profiles  

Science Conference Proceedings (OSTI)

Weather radar wind profiles (WRWPs) have been retrieved from Doppler volume scans using different implementations of the velocity–azimuth display (VAD) and volume velocity processing (VVP) methods. An extensive quality control of the radial ...

Iwan Holleman

2005-10-01T23:59:59.000Z

47

Analysis and Quality Control of Profiler Data Using Optimum Interpolation  

Science Conference Proceedings (OSTI)

An application of optimum interpolation (OI) is described for quality control and combination of wind profiler data with other observations of wind profiles. Data from three separate wind sensors at the National Aeronautics and Space ...

Thomas Nehrkorn

2000-05-01T23:59:59.000Z

48

Quality improvement and control based on defect reduction  

E-Print Network (OSTI)

This thesis addresses the quality improvement in a printing process at a food packaging company now experiencing hundreds of printing defects. Methodologies of Define, Measure, Analyze, Improve, and Control (DMAIC), and ...

Dai, Qi, M. Eng. Massachusetts Institute of Technology

2010-01-01T23:59:59.000Z

49

Illumina GA IIx& HiSeq 2000 Production Sequenccing and QC Analysis Pipelines at the DOE Joint Genome Institute  

Science Conference Proceedings (OSTI)

The U.S. Department of Energy (DOE) Joint Genome Institute's (JGI) Production Sequencing group is committed to the generation of high-quality genomic DNA sequence to support the mission areas of renewable energy generation, global carbon management, and environmental characterization and clean-up. Within the JGI's Production Sequencing group, a robust Illumina Genome Analyzer and HiSeq pipeline has been established. Optimization of the sesequencer pipelines has been ongoing with the aim of continual process improvement of the laboratory workflow, reducing operational costs and project cycle times to increases ample throughput, and improving the overall quality of the sequence generated. A sequence QC analysis pipeline has been implemented to automatically generate read and assembly level quality metrics. The foremost of these optimization projects, along with sequencing and operational strategies, throughput numbers, and sequencing quality results will be presented.

Daum, Christopher; Zane, Matthew; Han, James; Kennedy, Megan; San Diego, Matthew; Copeland, Alex; Li, Mingkun; Lucas, Susan

2011-01-31T23:59:59.000Z

50

Magnetically Controlled Reactor Shrinks Power Quality Costs and Power  

NLE Websites -- All DOE Office Websites (Extended Search)

Magnetically Controlled Reactor Shrinks Power Quality Costs and Power Magnetically Controlled Reactor Shrinks Power Quality Costs and Power Losses Speaker(s): Mark D. Galperin Date: December 18, 2000 - 12:00pm Location: Bldg. 90 Seminar Host/Point of Contact: Diana Morris In a new, magnetically controlled reactor (MCR), in which DC pulsing through a special winding controls inductive susceptance, high saturation of the magnetic circuit steel with optimal magnetic and electrical circuit parameters ensures less than 2-3% main harmonic distortion even without special filters. Transformer-like construction ensures reliable operation. MCR's increase power quality through automatic voltage regulation, reduced fluctuation, and smoothing of reactive power surges at 1/2 the cost of thyristor-controlled reactors (TCR's). Damping of voltage-oscillation

51

Research review: Indoor air quality control techniques  

Science Conference Proceedings (OSTI)

Techniques for controlling the concentration of radon, formaldehyde, and combustion products in the indoor air are reviewed. The most effective techniques, which are generally based on limiting or reducing indoor pollutant source strengths, can decrease indoor pollutant concentrations by a factor of 3 to 10. Unless the initial ventilation rate is unusually low, it is difficult to reduce indoor pollutant concentrations more than approximately 50% by increasing the ventilation rate of an entire building. However, the efficiency of indoor pollutant control by ventilation can be enhanced through the use of local exhaust ventilation near concentrated sources of pollutants, by minimizing short circuiting of air from supply to exhaust when pollutant sources are dispersed and, in some situations, by promoting a displacement flow of air and pollutants toward the exhaust. Active air cleaning is also examined briefly. Filtration and electrostatic air cleaning for removal of particles from the indoor air are the most practical and effective currently available techniques of air cleaning. 49 refs., 7 figs.

Fisk, W.J.

1986-10-01T23:59:59.000Z

52

Hawaii Department of Health Office of Environmental Quality Control | Open  

Open Energy Info (EERE)

Office of Environmental Quality Control Office of Environmental Quality Control Jump to: navigation, search Name Hawaii Department of Health Office of Environmental Quality Control Address 235 S. Beretania Suite 702 Place Honolulu, Hawaii Zip 96813 Website http://hawaii.gov/health/envir Coordinates 21.3094485°, -157.8578603° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":21.3094485,"lon":-157.8578603,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

53

Practical Handbook of Soybean Processing and Utilization Chapter 24 Soybean Processing Quality Control  

Science Conference Proceedings (OSTI)

Practical Handbook of Soybean Processing and Utilization Chapter 24 Soybean Processing Quality Control Processing eChapters Processing Downloadable pdf of Chapter 24 Soybean Processing Quality Control from ...

54

Transformer Thermal Modeling: Improving Reliability Using Data Quality Control  

E-Print Network (OSTI)

1 Transformer Thermal Modeling: Improving Reliability Using Data Quality Control Daniel J. Tylavsky--Eventually all large transformers will be dynamically loaded using models updated regularly from field measured data. Models obtained from measured data give more accurate results than models based on transformer

55

Optimisation of product quality and minimisation of its variation in climate controlled operations  

Science Conference Proceedings (OSTI)

An optimisation procedure is presented for direct control of product quality of agro-material and minimisation of its quality variation. The procedure builds on a previously presented model structure, which is briefly reviewed, together forming a methodological ... Keywords: Climate control, Hierarchial control, Optimisation, Potato storage, Product quality control, Quality variation

G.J. C. Verdijck; G. van Straten; H. A. Preisig

2005-08-01T23:59:59.000Z

56

X-ray Spectroscopy for Quality Control of Chemotherapy Drugs  

Science Conference Proceedings (OSTI)

We develop a method, employing Compton peak standardization and the use of matrix-matched spiked samples with Total Reflection X-ray Fluorescence (TXRF), for the determination of platinum plasma concentrations of patients undergoing chemotherapy with Pt-bearing drugs. Direct blood plasma analysis attains Pt detection limits of 70 ng/ml. Measurement results of prescribed drug doses are compared to achieved blood Pt concentrations indicating a lack of expected correlations. Direct analysis of Pt-containing infused drugs from a variety of suppliers indicates cases of abnormal concentrations which raises quality control issues. We demonstrate the potential usefulness of the method for pharmacokinetic studies or for routine optimization and quality control of Pt chemotherapy treatments.

Greaves, E. D.; Barros, H.; Bermudez, J.; Sajo-Bohus, L. [Universidad Simon Bolivar, Apartado 89000, Caracas 1080A (Venezuela); Angeli-Greaves, M. [Universidad Central de Venezuela, Apartado 90373 Caracas 1083A (Venezuela)

2007-10-26T23:59:59.000Z

57

Quality control and estimation of global solar radiation in China  

Science Conference Proceedings (OSTI)

Measurements of surface radiation in China are too sparse to meet demand for scientific research and engineering applications. Moreover, the radiation data often include erroneous and questionable values though preliminary quality-check has been done before the data release. Therefore, quality control of radiation data is often a prerequisite for using these data. In this study, a set of quality-check procedures were implemented to control the quality of the solar radiation measurements at 97 stations in China. A hybrid model for estimating global solar radiation was then evaluated against the controlled data. The results show that the model can estimate the global radiation with accuracy of MBE less than 1.5 MJ m{sup -2} and RMSE less than 2.8 MJ m{sup -2} for daily radiation and RMSE less than 2.0 MJ m{sup -2} for monthly-mean daily radiation at individual stations over most of China except at a few stations where unsatisfactory estimates were possibly caused by severe air pollution or too dense clouds. The MBE averaged over all stations are about 0.7 MJ m{sup -2} and RMSE about 2.0 MJ m{sup -2} for daily radiation and RMSE about 1.3 MJ m{sup -2} for monthly-mean daily radiation. Finally, this model was used to fill data gaps and to expand solar radiation data set using routine meteorological station data in China. This data set would substantially contribute to some radiation-related scientific studies and engineering applications in China. (author)

Tang, Wenjun; He, Jie [Key Laboratory of Tibetan Environment Changes and Land Surface Processes, Institute of Tibetan Plateau Research, Chinese Academy of Sciences, Beijing 100085 (China); Graduate School of Chinese Academy of Sciences, Beijing 100049 (China); Yang, Kun; Qin, Jun [Key Laboratory of Tibetan Environment Changes and Land Surface Processes, Institute of Tibetan Plateau Research, Chinese Academy of Sciences, Beijing 100085 (China)

2010-03-15T23:59:59.000Z

58

The Guy at the Controls: Labor Quality and Power Plant Efficiency  

E-Print Network (OSTI)

Controls: Labor Quality and Power Plant Efficiency July 2007Controls: Labor Quality and Power Plant E ciency James B.on the fuel e ciency of power plants. Although electricity

Bushnell, Jim B; Wolfram, Catherine D

2007-01-01T23:59:59.000Z

59

Hydrogenation of Fats and Oils: Theory and PracticeChapter 12 Quality and Control  

Science Conference Proceedings (OSTI)

Hydrogenation of Fats and Oils: Theory and Practice Chapter 12 Quality and Control Processing eChapters Processing Press Downloadable pdf of Chapter 12 Quality and Control from the book ...

60

CR mammography: Design and implementation of a quality control program  

SciTech Connect

Despite the recent acquisition of significant quantities of computed radiography CR equipment for mammography, Mexican regulations do not specify the performance requirements for digital systems such as those of CR type. The design of a quality control program QCP specific for CR mammography systems was thus considered relevant. International protocols were taken as reference to define tests, procedures and acceptance criteria. The designed QCP was applied in three CR mammography facilities. Important deficiencies in spatial resolution, noise, image receptor homogeneity, artifacts and breast thickness compensation were detected.

Moreno-Ramirez, A.; Brandan, M. E.; Villasenor-Navarro, Y.; Galvan, H. A.; Ruiz-Trejo, C. [Instituto de Fisica, Universidad Nacional Autonoma de Mexico, DF 04510 (Mexico); Departamento de Radiodiagnostico, Instituto Nacional de Cancerologia, DF 14080 (Mexico); Instituto de Fisica, Universidad Nacional Autonoma de Mexico, DF 04510 (Mexico)

2012-10-23T23:59:59.000Z

Note: This page contains sample records for the topic "qc quality control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Controller Design of Power Quality-Improving Appliances  

SciTech Connect

This paper presents an innovative solution to power quality problems -- using power quality improving (PQI) appliances to reduce harmonic currents and improve the power factor in buildings.

Hammerstrom, Donald J.; Zhou, Ning; Lu, Ning

2007-01-01T23:59:59.000Z

62

Coal quality control in the context of international standards ISO 9000-2000  

Science Conference Proceedings (OSTI)

The paper sets forth scientific foundations and organizational-technical environment offered by ISO 9000 standards that are oriented to product quality management and, thus, product quality planning. The authors describe the results of coal product quality planning with using the QFD methodology, present a model of coal quality control through the coal product life cycle and mining technologies. It is proposed to evaluate the quality management efficiency by the coefficient of concordance between the product quality and consumer's demands.

Freidina, E.V.; Botvinnik, A.A.; Dvornikova, A.N. [Russian Academy of Sciences, Novosibirsk (Russian Federation). Institute of Mining

2008-11-15T23:59:59.000Z

63

A VAD-Based Dealiasing Method for Radar Velocity Data Quality Control  

Science Conference Proceedings (OSTI)

This paper describes a new velocity–azimuth display (VAD)-based dealiasing method developed for automated radar radial velocity data quality control to satisfy the high-quality standard and efficiency required by operational radar data ...

Qin Xu; Kang Nai; Li Wei; Pengfei Zhang; Shun Liu; David Parrish

2011-01-01T23:59:59.000Z

64

Reduction of Middle-Atmospheric Forecast Bias through Improvement in Satellite Radiance Quality Control  

Science Conference Proceedings (OSTI)

This article discusses a practical problem faced in operational atmospheric forecasting and data assimilation, and efforts to improve forecast quality through the choice of quality control parameters. The need to utilize as much data as possible ...

Young-Joon Kim; William F. Campbell; Steven D. Swadley

2010-04-01T23:59:59.000Z

65

A Semiautomated Approach for Quality Controlling Large Historical Ocean Temperature Archives  

Science Conference Proceedings (OSTI)

This paper describes a method consisting of both automated statistical screening and manual quality control through expert visual inspection, which produces a historical ocean temperature archive of high quality—that is, nearly all profiles are ...

Ann Gronell; Susan E. Wijffels

2008-06-01T23:59:59.000Z

66

Vermont Air Pollution Control Regulations, Ambient Air Quality Standards (Vermont)  

Energy.gov (U.S. Department of Energy (DOE))

The ambient air quality standards are based on the national ambient air quality standards. The Vermont standards are classified as primary and secondary standards and judged adequate to protect...

67

A new monitoring design for uni-variate statistical quality control charts  

Science Conference Proceedings (OSTI)

In this research, an iterative approach is employed to analyze and classify the states of uni-variate quality control systems. To do this, a measure (called the belief that process is in-control) is first defined and then an equation is developed to ... Keywords: Average run length, CUSUM chart, EWMA chart, Process monitoring, Statistical quality control

Mohammad Saber Fallah Nezhad; Seyed Taghi Akhavan Niaki

2010-03-01T23:59:59.000Z

68

Magnetically Controlled Reactor Shrinks Power Quality Costs and...  

NLE Websites -- All DOE Office Websites (Extended Search)

ensures less than 2-3% main harmonic distortion even without special filters. Transformer-like construction ensures reliable operation. MCR's increase power quality through...

69

Quality Assurance Program Plan for FFTF effluent controls. Revision 1  

SciTech Connect

This Quality Assurance Program Plan is specific to environmental related activities within the FFTF Property Protected Area. The activities include effluent monitoring and Low Level Waste Certification.

Seamans, J.A.

1995-06-08T23:59:59.000Z

70

A Quality-Control Routine for Hourly Wind Observations  

Science Conference Proceedings (OSTI)

The quality of hourly wind speed and direction observations from 41 northeastern U.S. first-order weather stations is evaluated with regard to the recognition of individual observations that are either obviously in error or of suspect quality. An ...

Arthur T. DeGaetano

1997-04-01T23:59:59.000Z

71

Location-based services to control roller compaction quality for rock-fill dams  

Science Conference Proceedings (OSTI)

It is very important for rock-fill dams to carry out more accurately monitoring and remotely quality controlling in real time. Based on location based services, an integration platform, with the name of CRCQ-DAM, is proposed to control roller compaction ... Keywords: RTK, WebGIS, location-based services, rock-fill dams, roller compaction quality

Hao Wu; Qiankun Wang; Jiru Zhang; Qin Chen; Xupeng Wang

2009-09-01T23:59:59.000Z

72

Multifamily Quality Control Inspector Job/Task Analysis and Report: September 2013  

SciTech Connect

The development of job/task analyses (JTAs) is one of three components of the Guidelines for Home Energy Professionals project and will allow industry to develop training resources, quality assurance protocols, accredited training programs, and professional certifications. The Multifamily Quality Control Inspector JTA identifies and catalogs all of the tasks performed by multifamily quality control inspectors, as well as the knowledge, skills, and abilities (KSAs) needed to perform the identified tasks.

Owens, C. M.

2013-09-01T23:59:59.000Z

73

Quality Control of Weather Data during Extreme Events  

Science Conference Proceedings (OSTI)

Quality assurance (QA) procedures have been automated to reduce the time and labor necessary to discover outliers in weather data. Measurements from neighboring stations are used in this study in a spatial regression test to provide preliminary ...

Jinsheng You; Kenneth G. Hubbard

2006-02-01T23:59:59.000Z

74

A Quality Control Program for Surface Mesometeorological Data  

Science Conference Proceedings (OSTI)

A program is described which has been used to verify the quality of surface mesonet data collected during the Cooperative Convective Precipitation Experiment (CCOPE). The CCOPE mesonet consisted of 123 automated stations from two mesonet systems ...

Charles G. Wade

1987-09-01T23:59:59.000Z

75

Quality Controls for Profiler Measurements of Winds and RASS Temperatures  

Science Conference Proceedings (OSTI)

A new method for estimating winds and radio acoustic sounding system temperatures from radar Doppler measurements for the new NOAA wind profilers is described. This method emphasizes the quality of 6-min measurements prior to the computation of ...

B. L. Weber; D. B. Wuertz; D. C. Welsh; R. McPeek

1993-08-01T23:59:59.000Z

76

Low-Emissions Exhaust Quality Control System to Optimize  

E-Print Network (OSTI)

Use (Absorption Chiller, Boiler, others) Exhaust control unit (ExECU) integrated with a prime mover (DG) and combined heat and power (CHP) systems or combined cooling heating and power (CCHP) systems this control technology to microturbines with absorption chillers. The project anticipates an improvement

77

Quality Assurance Program Plan for TRUPACT-II Gas Generation Test Program  

Science Conference Proceedings (OSTI)

The Gas Generation Test Program (GGTP), referred to as the Program, is designed to establish the concentration of flammable gases and/or gas generation rates in a test category waste container intended for shipment in the Transuranic Package Transporter-II (TRUPACT-II). The phrase "gas generationtesting" shall refer to any activity that establishes the flammable gas concentration or the flammable gas generation rate. This includes, but is not limited to, measurements performed directly on waste containers or during tests performed on waste containers. This Quality Assurance Program Plan (QAPP) documents the quality assurance (QA) and quality control (QC) requirements that apply to the Program. The TRUPACT-II requirements and technical bases for allowable flammable gas concentration and gas generation rates are described in the TRUPACT-II Authorized Methods for Payload Control (TRAMPAC).

Carlsbad Field Office

2002-03-01T23:59:59.000Z

78

Report of the international workshop on quality control of monthly climate data  

SciTech Connect

The National Climatic Data Center (NCDC), the US Department of Energy`s Carbon Dioxide Information Analysis Center, and the World Meteorological Organization (WMO) cosponsored an international quality control workshop for monthly climate data, October 5--6, 1993, at NCDC. About 40 scientists from around the world participated. The purpose of the meeting was to discuss and compare various quality control methods and to draft recommendations concerning the most successful systems. The near-term goal to improve quality control of CLIMAT messages for the NCDC/WMO publication Monthly Climatic Data for the World was sucessfully met. An electronic bulletin board was established to post errors and corrections. Improved communications among Global Telecommunication System hubs will be implemented. Advanced quality control algorithms were discussed and improvements were suggested. Further data exchanges were arranged.

Not Available

1993-12-31T23:59:59.000Z

79

Two Years of Operational Comprehensive Hydrostatic Quality Control at the National Meteorological Center  

Science Conference Proceedings (OSTI)

A comprehensive hydrostatic quality control (CHQC) procedure for rawinsonde heights and temperatures was implemented into operational use at the National Meteorological Center (NMC) in December 1988. The CHQC uses a sophisticated decision-making ...

Lev S. Gandin; Lauren L. Morone; William G. Collins

1993-03-01T23:59:59.000Z

80

A Solo-based automated quality control algorithm for airborne tail Doppler radar data  

Science Conference Proceedings (OSTI)

An automated quality control pre-processing algorithm for removing non-weather radar echoes in airborne Doppler radar data has been developed. This algorithm can significantly reduce the time and experience level required for interactive radar ...

Michael M. Bell; Wen-Chau Lee; Cory A. Wolff; Huaqing Cai

Note: This page contains sample records for the topic "qc quality control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Quality Control of Accumulated Fields by Applying Spatial and Temporal Constraints  

Science Conference Proceedings (OSTI)

Accumulating gridded fields over time greatly magnifies the impact of impulse noise in the individual grids. A quality control method that takes advantage of spatial and temporal coherence can reduce the impact of such noise in accumulation grids. ...

Valliappa Lakshmanan; Madison Miller; Travis Smith

2013-04-01T23:59:59.000Z

82

Quality Control and Homogeneity of Precipitation Data in the Southwest of Europe  

Science Conference Proceedings (OSTI)

A quality control process involving outliers processing, homogenization, and interpolation has been applied to 95 monthly precipitation series in the Iberian Peninsula, southern France, and northern Africa during the period 1899–1989. A detailed ...

J. Fidel González-Rouco; J. Luis Jiménez; Vicente Quesada; Francisco Valero

2001-03-01T23:59:59.000Z

83

Engineering quality control of solar-powered intelligent water-saving irrigation  

Science Conference Proceedings (OSTI)

The development tendency of the agricultural irrigation technology is Automatic water-saving irrigation, powered by solar energy and achieved control purposes by moisture content monitoring techniques and the variable irrigation technology. In this paper, ... Keywords: intelligent, quality control, solar power, water-saving irrigation

Liu Xiaochu; Wu Hualong; Ling Jingpeng; Tao Jianhua; Yao Li

2010-03-01T23:59:59.000Z

84

Advances in Automated QA/QC for TRISO Fuel Particle Production  

Science Conference Proceedings (OSTI)

Fuel in most Generation IV reactor designs typically encompasses billions of the TRISO particles. Present day QA/QC methods, done manually and in many cases destructively, cannot economically test a statistically significant fraction of the large number of the individual fuel particles required. Fully automated inspection technologies are essential to economical TRISO fuel particle production. A combination of in-line nondestructive (NDE) measurements employing electromagnetic induction and digital optical imaging analysis is currently under investigation and preliminary data indicate the potential for meeting the demands of this application. To calibrate high-speed NDE methods, surrogate fuel particle samples are being coated with layers containing a wide array of defect types found to degrade fuel performance and these are being characterized via high-resolution CT and digital radiographic images.

Hockey, Ronald L.; Bond, Leonard J.; Batishko, Charles R.; Gray, Joseph N.; Saurwein, John J.; Lowden, Richard A.

2004-06-30T23:59:59.000Z

85

Support planning and controlling of early quality assurance by combining expert judgment and defect data--a case study  

Science Conference Proceedings (OSTI)

Planning quality assurance (QA) activities in a systematic way and controlling their execution are challenging tasks for companies that develop software or software-intensive systems. Both require estimation capabilities regarding the effectiveness of ... Keywords: Defect content estimation, Hybrid prediction model, Quality assurance effectiveness, Quality management, Software quality assurance

Michael Kläs; Haruka Nakao; Frank Elberzhager; Jürgen Münch

2010-08-01T23:59:59.000Z

86

Water Quality  

NLE Websites -- All DOE Office Websites (Extended Search)

Water Quality Water Quality We protect water quality through stormwater control measures and an extensive network of monitoring wells and stations encompassing groundwater, surface...

87

Application of Statistical Quality Control Techniques to Detonator Fabrication: Feasibility Study  

SciTech Connect

A feasibility study was performed on the use of process control techniques which might reduce the need for a duplicate inspection by production inspection and quality control inspection. Two active detonator fabrication programs were selected for the study. Inspection areas accounting for the greatest percentage of total inspection costs were selected by applying "Pareto's Principle of Maldistribution." Data from these areas were then gathered and analyzed by a process capabiltiy study.

Jones, J. Frank

1971-05-20T23:59:59.000Z

88

Audit of the Savannah River Site's Quality Control Program for Groundwater Sampling, IG-0405  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0, 1997 0, 1997 MEMORANDUM FOR: THE SECRETARY FROM: John C. Layton Inspector General SUBJECT: INFORMATION: Report on "Audit of the Savannah River Site's Quality Control Program for Groundwater Sampling" BACKGROUND The Savannah River Site's groundwater remediation program was managed by the Department of Energy's (Department) management and operating contractor for the site, Westinghouse Savannah River Company (Westinghouse). One component of the remediation

89

Real-Time Wind Turbine Emulator Suitable for Power Quality and Dynamic Control Studies  

E-Print Network (OSTI)

1 Real-Time Wind Turbine Emulator Suitable for Power Quality and Dynamic Control Studies Dale S. L. Dolan, Student Member, IEEE, P. W. Lehn, Member IEEE Abstract-- Wind turbines are increasingly becoming-time Wind Turbine Emulator, which emulates the dynamic torque produced by an actual turbine has been

Lehn, Peter W.

90

Real-Time Quality Control of Wave Observations in the North Sea  

Science Conference Proceedings (OSTI)

The use of ocean wave data in new data assimilation techniques prompted the development of a real-time quality control system for wave height and wave period observations. Over the North Sea, a relatively large number of wave observations, as ...

María Paula Etala; Gerrit Burgers

1994-12-01T23:59:59.000Z

91

ORIGINAL RESEARCH Health Behaviors and Quality of Life of Cancer Survivors in Massachusetts, 2006: Data Use for Comprehensive Cancer Control  

E-Print Network (OSTI)

Pierre S. Health behaviors and quality of life of cancer survivors in Massachusetts, 2006: data use for comprehensive cancer control. Prev Chronic Dis 2010;7(1).

Temeika L. Fairley; Phd Helen Hawk; Phd Snaltze Pierre; Peer Reviewed

2010-01-01T23:59:59.000Z

92

Applying infrared thermography as a quality-control tool for the rapid  

NLE Websites -- All DOE Office Websites (Extended Search)

Applying infrared thermography as a quality-control tool for the rapid Applying infrared thermography as a quality-control tool for the rapid detection of polymer-electrolyte-membrane-fuel-cell catalyst-layer-thickness variations Title Applying infrared thermography as a quality-control tool for the rapid detection of polymer-electrolyte-membrane-fuel-cell catalyst-layer-thickness variations Publication Type Journal Article Year of Publication 2012 Authors Aieta, Niccolo V., Prodip K. Das, Andrew Perdue, Guido Bender, Andrew M. Herring, Adam Z. Weber, and Michael J. Ulsh Journal Journal of Power Sources Volume 211 Pagination 4 - 11 Date Published 8/2012 ISSN 03787753 Keywords catalyst layer, corrosion, defects, fuel cell, infrared thermography, manufacturing, pemfc, quality control Abstract As fuel cells become more prominent, new manufacturing and production methods are needed to enable increased volumes with high quality. One necessary component of this industrial growth will be the accurate measurement of the variability of a wide range of material properties during the manufacturing process. In this study, a method to detect defects in fuel cell catalyst layers is investigated through experiment and mathematical simulation. The method uses infrared thermography and direct-current electronic-excitation methods to detect variations in platinum-containing catalyst-layer thickness with high spatial and temporal resolution. Data analysis, operating-condition impacts, and detection limits are explored, showing the measurement of defects on the millimeter length scale. Overall, the experimental and modeling results demonstrate great potential of this technique as a nondestructive method to measure defects that is amenable to use on roll-to-roll manufacturing lines.

93

Report of the Review of the Hanford Solid Waste Environmental Impact Statement regarding Data Quality Control and Management Issues  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Review of the Hanford Review of the Hanford Solid Waste Environmental Impact Statement (EIS) Data Quality, Control and Management Issues January 2006 Hanford Solid Waste Environment Impact Statement (EIS) Data Quality, Control and Management Issues Review Report ii Contents EXECUTIVE SUMMARY .................................................................................. IV 1.0 BACKGROUND ................................................................................................................ 1 2.0 REVIEW APPROACH....................................................................................................... 1 3.0 SUMMARY........................................................................................................................ 2 4.0 REVIEW RESULTS........................................................................................................... 4

94

Quality control of solar radiation data within the RMIB solar measurements network  

Science Conference Proceedings (OSTI)

Assessment of the solar resource is based upon measured data, where available. However, with any measurement there exist errors. Consequently, solar radiation data do not exhibit necessarily the same reliability and it often happens that users face time series of measurements containing questionable values though preliminary technical control has been done before the data release. To overcome such a situation, a major effort has been undertaken at the Royal Meteorological Institute of Belgium (RMIB) to develop procedures and software for performing post-measurement quality control of solar data from the radiometric stations of our in situ solar monitoring network. Moreover, because solar energy applications usually need continuous time series of solar radiation data, additional procedures have also been established to fill missing values (data initially lacking or removed via quality checks). (author)

Journee, Michel; Bertrand, Cedric [Royal Meteorological Institute of Belgium, Avenue Circulaire 3, B-1180 Brussels (Belgium)

2011-01-15T23:59:59.000Z

95

The Use of Photochemical Air Quality Models for Evaluating Emission Control Strategies: A Synthesis Report  

Science Conference Proceedings (OSTI)

This report outlines conditions under which gridded photochemical air quality models are legitimate tools for determining the types of emission controls (VOC, NOx, or both) that would be most effective for reducing ozone concentration. In doing so, it emphasizes that models should not be used indiscriminately by pointing out their limitations and the resulting consequences. It also suggests ways to make models made more suitable for regulatory purposes by formulating results probabilistically.

1993-02-18T23:59:59.000Z

96

File:Colorado Water Quality Control Act.pdf | Open Energy Information  

Open Energy Info (EERE)

Water Quality Control Act.pdf Water Quality Control Act.pdf Jump to: navigation, search File File history File usage Metadata File:Colorado Water Quality Control Act.pdf Size of this preview: 463 × 599 pixels. Other resolution: 464 × 600 pixels. Go to page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 Go! next page → next page → Full resolution ‎(1,275 × 1,650 pixels, file size: 413 KB, MIME type: application/pdf, 69 pages) File history Click on a date/time to view the file as it appeared at that time. Date/Time Thumbnail Dimensions User Comment current 14:23, 14 March 2013 Thumbnail for version as of 14:23, 14 March 2013 1,275 × 1,650, 69 pages (413 KB) Alevine (Talk | contribs)

97

Method of controlling coherent synchroton radiation-driven degradation of beam quality during bunch length compression  

DOE Patents (OSTI)

A method of avoiding CSR induced beam quality defects in free electron laser operation by a) controlling the rate of compression and b) using a novel means of integrating the compression with the remainder of the transport system: both are accomplished by means of dispersion modulation. A large dispersion is created in the penultimate dipole magnet of the compression region leading to rapid compression; this large dispersion is demagnified and dispersion suppression performed in a final small dipole. As a result, the bunch is short for only a small angular extent of the transport, and the resulting CSR excitation is small.

Douglas, David R. (Newport News, VA); Tennant, Christopher D. (Williamsburg, VA)

2012-07-10T23:59:59.000Z

98

Quality Control of Pavements and Tarmacs Using ({sup 137}Cs){gamma} Compton Scattering  

Science Conference Proceedings (OSTI)

The {gamma} Compton scattering over a volume of concrete has been studied in order to design an instrument for density measurements. It will be used for the quality control in road construction, where large surfaces must be monitored. The experimental results and Monte Carlo simulations of the {gamma} Compton scattering over homogeneous and inhomogeneous volumes of concrete are shown. MC simulations have been useful to optimize the values of several parameters to improve the experimental set up and to estimate the extension of the explored volume.

Pino, F.; Barros, H.; Bernal, M.; Sajo-Bohus, L.; Palacios, D.; Greaves, E. D.; Viesti, G. [Nuclear Physics Laboratory, Simon Bolivar University, Caracas (Venezuela, Bolivarian Republic of)

2010-08-04T23:59:59.000Z

99

A Two-Stage Quality Control Method for 2-m Temperature Observations Using Biweight Means and a Progressive EOF Analysis  

Science Conference Proceedings (OSTI)

The relatively smooth terrain embedded in the numerical model creates an elevation difference against the actual terrain, which in turn makes the quality control of 2-m temperature difficult when forecast or analysis fields are utilized in the ...

Zhifang Xu; Yi Wang; Guangzhou Fan

2013-02-01T23:59:59.000Z

100

Quality assurance plan for the High Level Controller for the CBMS Block II  

Science Conference Proceedings (OSTI)

This document establishes the software Quality Assurance Plan (QAP) for the High Level Controller for the Chemical and Biological Mass Spectrometer Block II (HLC/CBMS-II) project activities under the Computing, Robotics, and Education (CRE) Directorate management. It defines the requirements and assigns responsibilities for ensuring, with a high degree of confidence, that project objectives will be achieved as planned. The CBMS Program was awarded to ORNL by the US Army Chemical and Biological Defense command, Aberdeen Proving Ground, Maryland, to design the next version (Block II) mass spectrometer for the detection and identification of chemical and biological warfare agents, to fabricate four engineering prototypes, and to construct eight preproduction units. Section 1 of this document provides an introduction to the HLC/CBMS-II project QAP. Sections 2 and 3 describe the specific aspects of quality assurance as applicable to the project. Section 4 reviews the project approach to risk management. The Risk Management Matrix given in Appendix A is a tool to assess, prioritize, and prevent problems before they occur; therefore, the matrix will be reviewed and revised on a periodic basis. Appendix B shows the quality assurance criteria of the DOE Order 5700.6C and their applicability to this project.

Reid, R.W.; Robbins, I.F.; Stewart, K.A.; Terry, C.L.; Whitaker, R.A.; Wolf, D.A.; Zager, J.C.

1997-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "qc quality control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Quality control of chemical and isotopic analyses of geothermal water samples  

DOE Green Energy (OSTI)

Chemical and isotopic analyses of geothermal water samples must meet certain levels of accuracy and reliability to be useful for identifying geochemical processes in hydrothermal systems. Quality control is largely a concern for the analytical laboratory, but the geochemist or reservoir engineer using the chemical data must also be concerned with analytical quality. To test accuracy and reliability of analyses available from laboratories, splits of seven water samples were sent to four stable-isotope laboratories, and splits of five water samples were sent to four chemical laboratories. The analyses of each sample were compared among laboratories, and the differences in analyses were evaluated using criteria developed for this comparison. Isotopic compositions were considered reliable if they deviated from mean values by less than 2{per_thousand}, for hydrogen and by less than 0.15{per_thousand}, for oxygen. Concentrations of each chemical component were considered reliable if they differed from mean values by less than 10%. Chemical analyses were examined for internal consistency by calculating the error in ionic charge balance and the error between ionic charge and electrical conductivity. To be considered internally consistent, chemical analyses must have less than 5% error in charge balance and less than 10% error in conductivity balance. Three isotope laboratories gave consistent compositions of all samples. No chemical laboratory gave consistent analyses of all samples. Recommendations are made that provide the user of isotopic and chemical data with the ability to better evaluate the quality of analyses.

Reed, Marshall J.; Mariner, Robert H.

1991-01-01T23:59:59.000Z

102

Control strategies for mitigation of oil-shale-related-water quality concerns  

SciTech Connect

A comprehensive study of in situ retorting at the Logan Wash has indicated the importance of developing baseline information including raw shale characterization, the elucidation of mineralogical and chemical controls on trace element mobilities from shales subjected to in situ processing, and the research necessary to identify strategies for control of recognized environmental impacts. It is impossible to assess the magnitude of trace element releases to be expected from a commercial in situ facility once banks of retorts or the entire facility is abandoned and dewatering of the area is concluded. However, laboratory-scale studies can indeed identify the relative environmental acceptability of spent shale materials generated by in situ processing. In this research, an attempt was made to relate mineralogy and leaching behavior of field-generated materials with leachate composition and solution chemical processes. The interaction of these factors will ultimately affect the impact of in situ processing on surface and groundwater quality.

Peterson, E.J.; Wagner, P.

1981-01-01T23:59:59.000Z

103

Identifying Doppler Velocity Contamination Caused by Migrating Birds. Part II: Bayes Identification and Probability Tests  

Science Conference Proceedings (OSTI)

Based on the Bayesian statistical decision theory, a probabilistic quality control (QC) technique is developed to identify and flag migrating-bird-contaminated sweeps of level II velocity scans at the lowest elevation angle using the QC ...

Shun Liu; Qin Xu; Pengfei Zhang

2005-08-01T23:59:59.000Z

104

Nuclear Energy Research Initiative Annual Report-Innovative Approaches to Automating QA/QC of Fuel Particle Production Using On-Line Nondestructive Methods for Higher Reliability.  

Science Conference Proceedings (OSTI)

This document summarizes the activities performed and progress made in FY-03. Various approaches for automating the particle fuel production QC process using on-line nondestructive methods for higher reliability were evaluated. In this first-year of a three-year project, surrogate fuel particles made available for testing included leftovers from initial coater development runs. These particles had a high defect fraction and the particle properties spanned a wide range, providing the opportunity to examine worst-case conditions before refining the inspection methods to detect more subtle coating features. Particles specifically designed to evaluate the NDE methods being investigated under this project will be specified and fabricated at ORNL early next reporting period. The literature was reviewed for existing inspection technology and to identify many of the fuel particle conditions thought to degrade its performance. A modeling study, including the electromagnetic and techniques, showed that the in-line electromagnetic methods should provide measurable responses to missing layers, kernel diameter, and changes in coating layer thickness, with reasonable assumptions made for material conductivities. The modeling study for the ultrasonic methods provided the resonant frequencies that should be measured using the resonant ultrasound technique, and the results from these calculations were published in the proceedings for two conferences. The notion of a particle quality index to relate coating properties to fabrication process parameters was explored. Progress was made in understanding the fabrication process. GA identified key literature in this area and Saurwein (2003a) provided a literature review/summary. This literature has been reviewed. An approach previously applied to flexible manufacturing was adopted and the modification and development of the concepts to meet TRISO particle fuel manufacturing and QA/QC needs initiated. This approach establishes relationships between key process parameters and part parameters, including ''defects'' for each manufacturing step--which in this case is a coating layer. This activity will continue in year two, when an initial evaluation will be made using available process and particle data. Radiographic and Computed Tomography (CT) techniques were developed and refined to examine individual particles and batches of up to about 30 to 40 particles for kernel diameter, coating layer thickness and spatial uniformity. These results are essential for developing the defect library of characterized particles that will be used to calibrate the high-speed nondestructive measurement methods that are found capable of automatically detecting particles having properties outside a specified range. The in-line inspection methods evaluated include the electrical property measurement methods traditionally referred to as eddy current and capacitance (or dielectric) in the nondestructive test methods literature. An eddy current technique was developed and evaluated on stationary particles. Good correlation was found between the eddy current measurements and the radiographically determined particle dimensions. Initial measurements on fuel compacts using the eddy current approach showed that these materials are amenable to electrical inspection and that significant coil impedance variability can be observed among different samples.

Hockey, Ronald L.; Bond, Leonard J.; Ahmed, Salahuddin; Sandness, Gerald A.; Gray, Joseph N.; Batishko, Charles R.; Flake, Matthew; Panetta, Paul D.; Saurwein, John J.; Lowden, Richard A.; Good, Morris S.

2004-04-20T23:59:59.000Z

105

Experience-Based Quality Control of Clinical Intensity-Modulated Radiotherapy Planning  

Science Conference Proceedings (OSTI)

Purpose: To incorporate a quality control tool, according to previous planning experience and patient-specific anatomic information, into the intensity-modulated radiotherapy (IMRT) plan generation process and to determine whether the tool improved treatment plan quality. Methods and Materials: A retrospective study of 42 IMRT plans demonstrated a correlation between the fraction of organs at risk (OARs) overlapping the planning target volume and the mean dose. This yielded a model, predicted dose = prescription dose (0.2 + 0.8 [1 - exp(-3 overlapping planning target volume/volume of OAR)]), that predicted the achievable mean doses according to the planning target volume overlap/volume of OAR and the prescription dose. The model was incorporated into the planning process by way of a user-executable script that reported the predicted dose for any OAR. The script was introduced to clinicians engaged in IMRT planning and deployed thereafter. The script's effect was evaluated by tracking {delta} = (mean dose-predicted dose)/predicted dose, the fraction by which the mean dose exceeded the model. Results: All OARs under investigation (rectum and bladder in prostate cancer; parotid glands, esophagus, and larynx in head-and-neck cancer) exhibited both smaller {delta} and reduced variability after script implementation. These effects were substantial for the parotid glands, for which the previous {delta} = 0.28 {+-} 0.24 was reduced to {delta} = 0.13 {+-} 0.10. The clinical relevance was most evident in the subset of cases in which the parotid glands were potentially salvageable (predicted dose dose of 20.3 Gy. After implementation, an average of 18.7 Gy was delivered to salvageable cases, with an average predicted dose of 17.2 Gy. In the prostate cases, the rectum model excess was reduced from {delta} = 0.28 {+-} 0.20 to {delta} = 0.07 {+-} 0.15. On surveying dosimetrists at the end of the study, most reported that the script both improved their IMRT planning (8 of 10) and increased their efficiency (6 of 10). Conclusions: This tool proved successful in increasing normal tissue sparing and reducing interclinician variability, providing effective quality control of the IMRT plan development process.

Moore, Kevin L., E-mail: kmoore@radonc.wustl.edu [Department of Radiation Oncology, Mallinckrodt Institute of Radiology, Washington University School of Medicine, St. Louis, MO (United States); Brame, R. Scott [Department of Radiation Oncology, University of California Los Angeles, Los Angeles, CA (United States); Low, Daniel A.; Mutic, Sasa [Department of Radiation Oncology, Mallinckrodt Institute of Radiology, Washington University School of Medicine, St. Louis, MO (United States)

2011-10-01T23:59:59.000Z

106

FAQS Job Task Analyses - Weapons Quality Assurance Community  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NA-121.3 Weapons Quality Assurance Community NA-121.3 Weapons Quality Assurance Community Consolidated JOB/TASK Analysis 12/2011 Job Analysis Worksheet for Tasks WQA Specialist Task Source Import. Freq. #1 Monitors, inspects, analyzes and investigates complex electrical, electronic, mechanical, electro-mechanical, and nuclear components, subassemblies, and assemblies associated with the manufacture of nuclear weapons and other non-nuclear components as applicable QC-1, WQAPM, DesgnDefn 4 3 #2 Conducts Quality Assurance Surveys (including Product Acceptance) and oversight activities of contractor operations QC-1, WQAPM 5 2 #3 Performs verification inspection (including Contractor Acceptance Verification) of product manufactured by NNSA Contractors, QAIP development, QADRs, nonconformance activities/requirements

107

An Improved QC Process for Temperature in the Daily Cooperative Weather Observations  

Science Conference Proceedings (OSTI)

TempVal is a spatial component of data quality assurance algorithms applied by the National Climatic Data Center (NCDC), and it has been used operationally for about 4 yr. A spatial regression test (SRT) approach was developed at the regional ...

Kenneth G. Hubbard; Nathaniel B. Guttman; Jinsheng You; Zhirong Chen

2007-02-01T23:59:59.000Z

108

Quality control and assurance applied to the analysis of environmental samples collected from known geothermal sites. Final report  

DOE Green Energy (OSTI)

The components of an analytical quality control and assurance program for the analysis of trace toxic and priority pollutants are reviewed in general. It is recommended that these principles be applied to develop increased confidence in a laboratory's analytical accuracy by establishing validated standard operating procedures with built in controls and internal cross checks and developing an approved standard operating procedure for quality assurance consisting of audits and appropriate documentation. It is recommended that interlaboratory comparisons be considered as a means of continually documenting analytical accuracy.

Cooper, J.A.

1978-01-31T23:59:59.000Z

109

"Quality" control in China's reform era : investigating the suzhi discourse in women's work  

E-Print Network (OSTI)

China's reform era has coincided with an emergence of a Chinese Communist Party-State ideological discourse concerning "population quality." Claims and accusations of 'low quality' are particularly targeted at rural migrant ...

Yip, Cheryl

2008-01-01T23:59:59.000Z

110

Environmental Impact Assesment in the Baltic Countries and Poland -- Screening and Quality Control  

E-Print Network (OSTI)

In The Baltic Countries And Poland - Screening And QualityIn The Baltic Countries And Poland - Screening And QualityLatvia, Lithuania and Poland. All four of these countries

Marriott, A.; Doughty, M.

1997-01-01T23:59:59.000Z

111

A Real-Time and Offline Quality Control Methodology for SeaSonde High-Frequency Radar Currents  

Science Conference Proceedings (OSTI)

A near-real-time and offline quality control methodology for SeaSonde systems is proposed. It is applied on radial current maps and is based on the determination of the signal-to-noise ratio (SNR) values of the Doppler lines that contribute to the ...

Simone Cosoli; Giorgio Bolzon; Andrea Mazzoldi

2012-09-01T23:59:59.000Z

112

Review of Cyclotron Production and Quality Control of High Specific Activity Radionuclides for Biomedical, Biological, Industrial and Environmental Applications at INFN-LASA  

E-Print Network (OSTI)

Review of Cyclotron Production and Quality Control of High Specific Activity Radionuclides for Biomedical, Biological, Industrial and Environmental Applications at INFN-LASA

Birattari, C; Groppi, F; Gini, L

2001-01-01T23:59:59.000Z

113

Trends in Twentieth-Century U.S. Snowfall Using a Quality-Controlled Dataset  

Science Conference Proceedings (OSTI)

A quality assessment of daily manual snowfall data has been undertaken for all U.S. long-term stations and their suitability for climate research. The assessment utilized expert judgment on the quality of each station. Through this process, the ...

Kenneth E. Kunkel; Michael Palecki; Leslie Ensor; Kenneth G. Hubbard; David Robinson; Kelly Redmond; David Easterling

2009-01-01T23:59:59.000Z

114

Data Quality Assessment and Control for the ARM Climate Research Facility  

Science Conference Proceedings (OSTI)

The mission of the Atmospheric Radiation Measurement (ARM) Climate Research Facility is to provide observations of the earth climate system to the climate research community for the purpose of improving the understanding and representation, in climate and earth system models, of clouds and aerosols as well as their coupling with the Earth's surface. In order for ARM measurements to be useful toward this goal, it is important that the measurements are of a known and reasonable quality. The ARM data quality program includes several components designed to identify quality issues in near-real-time, track problems to solutions, assess more subtle long-term issues, and communicate problems to the user community.

Peppler, R

2012-06-26T23:59:59.000Z

115

Quality Control and Flux Sampling Problems for Tower and Aircraft Data  

Science Conference Proceedings (OSTI)

A series of automated tests is developed for tower and aircraft time series to identify instrumentation problems, flux sampling problems, and physically plausible but unusual situations. The automated procedures serve as a safety net for quality ...

Dean Vickers; L. Mahrt

1997-06-01T23:59:59.000Z

116

Quality Control and Tilt Correction Effects on the Turbulent Fluxes Observed at an Ocean Platform  

Science Conference Proceedings (OSTI)

This study investigates atmospheric factors influencing the quality and the postprocessing (e.g., tilt correction) of fast-response measurements of turbulent fluxes for difficult open-sea measurements over an offshore platform. The data were ...

Hyun-Mi Oh; Kyung-Eak Kim; Kyung-Ja Ha; Larry Mahrt; Jae-Seol Shim

2011-03-01T23:59:59.000Z

117

On the Use of Satellite Altimeter Data in Argo Quality Control  

Science Conference Proceedings (OSTI)

Satellite altimeter measurements are used to check the quality of the Argo profiling floats time series. The method compares collocated sea level anomalies from altimeter measurements and dynamic height anomalies calculated from Argo temperature ...

Stephanie Guinehut; Christine Coatanoan; Anne-Lise Dhomps; Pierre-Yves Le Traon; Gilles Larnicol

2009-02-01T23:59:59.000Z

118

Factors controlling reservoir quality in tertiary sandstones and their significance to geopressured geothermal production  

DOE Green Energy (OSTI)

Variable intensity of diagenesis is the factor primarily responsible for contrasting regional reservoir quality of Tertiary sandstones from the upper and lower Texas coast. Detailed comparison of Frio sandstone from the Chocolate Bayou/Danbury Dome area, Brazoria County, and Vicksburg sandstones from the McAllen Ranch Field area, Hidalgo County, reveals that extent of diagenetic modification is most strongly influenced by (1) detrital mineralogy and (2) regional geothermal gradients. The regional reservoir quality of Frio sandstones from Brazoria County is far better than that characterizing Vicksburg sandstones from Hidalgo County, especially at depths suitable for geopressured geothermal energy production. However, in predicting reservoir quality on a site-specific basis, locally variable factors such as relative proportions for porosity types, pore geometry as related to permeability, and local depositional environment must also be considered. Even in an area of regionally favorable reservoir quality, such local factors can significantly affect reservoir quality and, hence, the geothermal production potential of a specific sandstone unit.

Loucks, R.G.; Richmann, D.L.; Milliken, K.L.

1981-01-01T23:59:59.000Z

119

The Quality Control of Long-Term Climatological Data Using Objective Data Analysis  

Science Conference Proceedings (OSTI)

One of the major concerns with detecting global climate change is the quality of the data. Climate data are extremely sensitive to errant values and outliers. Prior to analysis of these time series, it is important to remove outliers in a ...

Jon K. Eischeid; C. Bruce Baker; Thomas R. Karl; Henry F. Diaz

1995-12-01T23:59:59.000Z

120

Temperature and combustion quality control in power station boilers using artificial neural networks  

Science Conference Proceedings (OSTI)

The classification is an important domain in boiler flame image processing and is a preliminary step toward detection, recognition and understanding of combustion condition. In this paper, Back Propagation Algorithm (BPA) is introduced for boiler flame ... Keywords: Back Propagation Algorithm, Fisher's linear discriminant analysis, combustion quality, features, flame colour, image processing, temperature identification

K. Sujatha; N. Pappa

2010-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "qc quality control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Quality Control and Archiving of Digital Data Gathered by the Bureau of Reclamation's Weather Radar  

Science Conference Proceedings (OSTI)

This paid describes the logic and process used to process high volumes of digital radar data recorded on magnetic tape to a compressed quality-checked archival format. The basic Philosophy in the processing is to retain all echo data that exceed ...

Gerard E. Klazura; Ra Aman

1989-12-01T23:59:59.000Z

122

An Improved Quality Control for AIRS Total Column Ozone Observations within and around Hurricanes  

Science Conference Proceedings (OSTI)

Atmospheric Infrared Sounder (AIRS) provides twice-daily global observations from which total column ozone data can be retrieved. However, 20% ~ 30% of AIRS ozone data are flagged to be of bad quality. Most of the flagged data were identified to ...

H. Wang; X. Zou; G. Li

2012-03-01T23:59:59.000Z

123

Quality Reference Samples  

Science Conference Proceedings (OSTI)

Peer-reviewed fats and oils related performance-based control samples for lab quality assurance and quality control. Quality Reference Samples Certified Reference Materials (CRM) aocs certified Certified Reference Materials chemists CRM fat fats lab labo

124

Degradation of the E. coli small heat-shock proteins by the AAA+ protease lon : significance to protein quality-control  

E-Print Network (OSTI)

The refolding and elimination of damaged and aggregated proteins requires the concerted effort of several branches of the protein quality-control network. This network includes refolding chaperones, disaggregases, holdases ...

Bissonnette, Sarah Ayano

2010-01-01T23:59:59.000Z

125

Implementation of Real-Time Quality Control Procedures by Means of a Probabilistic Estimate of Seawater Temperature and Its Temporal Evolution  

Science Conference Proceedings (OSTI)

Near-real-time quality control procedures for temperature profiles collected from ships of opportunity were implemented during the 1980s in oceans across the world and from the 1990s in the Mediterranean. In this sea, the procedures were ...

Giuseppe M. R. Manzella; Marco Gambetta

2013-03-01T23:59:59.000Z

126

Production of High Quality Dust Control Foam to Minimize Moisture Addition to Coal  

E-Print Network (OSTI)

Foam is displacing wet suppression as the method of choice for controlling fugitive emissions from coal. Coal treated by wet suppression consumes through moisture addition, a heat energy equivalent of 1 ton out of every 500 tons fired. The application of foam requires less than 10% of the moisture usually required for wet suppression. In addition, foam is a much more effective dust suppressant, especially on respirable dust (particle with an aerodynamic diameter less than 10 microns). To achieve maximum benefit from foam dust control, efficient on-site production of dry, stable foam is required. This paper discusses the basics of foam production and the many variables affecting foam expansion ratios. Successful applications of foam are also described.

Termine, F.; Jordan, S. T.

1985-05-01T23:59:59.000Z

127

Quality-control gas-detector tube readers: optical versus observer  

SciTech Connect

The influence of temperature and humidity upon two length-of-stain gas detector tube systems was studied. Length-of-stain tubes were exposed under carefully controlled laboratory conditions, then read by a panel of observers and a newly developed optical tube reader. Data from the study show, generally, good correlation of results between the observer panel and the optical tube reader. Also, the data indicated that temperature and humidity calibration curves or tables were needed for several of the detector tubes. The two detector tube systems were comparable in reliability; however, for detecting a particular gas, one system may be selected over the other.

Carroll, H.B. Jr.

1976-12-01T23:59:59.000Z

128

Real-time wind turbine emulator suitable for power quality and dynamic control studies, MASc Thesis  

E-Print Network (OSTI)

Abstract — Wind turbines are increasingly becoming significant components of power systems. To evaluate competing wind energy conversion technologies, a real-time Wind Turbine Emulator, which emulates the dynamic torque produced by an actual turbine has been developed. This is necessary since the real world performance of a wind turbine, subjected to variable wind conditions is more difficult to evaluate than a standard turbine generator system operating in near steady state. This emulator is capable of reproducing both the static and dynamic torque of an actual wind turbine. It models the torque oscillations caused by wind shear, tower shadow, and the obvious pulsations caused by variable wind speed. Also included are the dynamic effects of a large turbine inertia. This emulator will allow testing without the costly construction of the actual turbine blades and tower to determine the strengths and weaknesses of competing energy conversion and control technologies.

Dale S. L. Dolan; Student Member; P. W. Lehn; Member Ieee

2005-01-01T23:59:59.000Z

129

New process modeling [sic], design, and control strategies for energy efficiency, high product quality, and improved productivity in the process industries. Final project report  

SciTech Connect

This project was concerned with the development of process design and control strategies for improving energy efficiency, product quality, and productivity in the process industries. In particular, (i) the resilient design and control of chemical reactors, and (ii) the operation of complex processing systems, was investigated. Specific topics studied included new process modeling procedures, nonlinear controller designs, and control strategies for multiunit integrated processes. Both fundamental and immediately applicable results were obtained. The new design and operation results from this project were incorporated into computer-aided design software and disseminated to industry. The principles and design procedures have found their way into industrial practice.

Ray, W. Harmon

2002-06-05T23:59:59.000Z

130

Nanotube Quality Control  

Science Conference Proceedings (OSTI)

... A variety of coating techniques can be used to deposit the nanotube material, including drop casting, spin coating, and spray deposition. ...

2012-11-13T23:59:59.000Z

131

Melt Quality Control  

Science Conference Proceedings (OSTI)

Mar 2, 2011 ... In-Line Salt-ACDTM: A Chlorine–Free Technology for Metal Treatment: Patrice Robichaud1; Claude Dupuis1; Alain Mathis2; Pascal Coté3; ...

132

Department of EneDepartment of Energy Quality Assurance: Design Control for the Waste Treatment and Immobilization Plant at the Hanford Sitergy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Department of Energy Quality Department of Energy Quality Assurance: Design Control for the Waste Treatment and Immobilization Plant at the Hanford Site DOE/IG-0894 September 2013 U.S. Department of Energy Office of Inspector General Office of Audits and Inspections Department of Energy Washington, DC 20585 September 30, 2013 MEMORANDUM FOR THE SECRETARY FROM: Gregory H. Friedman Inspector General SUBJECT: INFORMATION: Audit Report on "Department of Energy Quality Assurance: Design Control for the Waste Treatment and Immobilization Plant at the Hanford Site" INTRODUCTION AND OBJECTIVE The Department of Energy is constructing the $12.2 billion Waste Treatment and Immobilization Plant (WTP) to vitrify approximately 56 million gallons of radioactive and chemically hazardous

133

ARM - Data Quality Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Quality Program Quality Program DQ Resources Data Quality Assessment and Control Report (PDF, 747KB) Data Quality Office Data Quality Problem Reporting (DQPR) Contact Us Submit Data Quality Findings Randy Peppler, Data Quality Manager Ken Kehoe, Data Quality Specialist Justin Monroe, Data Quality Specialist Adam Theisen, Data Quality Specialist Sean Moore, Data Quality Consultant Instrument and Site Contacts Instrument Mentors AAF Contacts AMF Contacts NSA Site Contacts SGP Site Contacts TWP Site Contacts Data Quality Program Introduction One of the goals of the ARM Climate Research Facility is to provide datastreams of quality suitable for scientific research. Maintaining data quality for an organization program of the size and complexity of the ARM Facility is a significant challenge; efforts toward this end have matured

134

Ozone Modeling for Compliance Planning: A Synopsis of "The Use of Photochemical Air Quality Models for Evaluating Emission Control Strategies--A Synthesis Report"  

Science Conference Proceedings (OSTI)

The 1990 Clean Air Act Amendments require that many nonattainment areas use gridded, photochemical air quality models to develop compliance plans for meeting the ambient ozone standard. This report reviews the status of photochemical air models--the computer simulation programs that will be used to set emission control programs to meet ground level (tropospheric) ozone standards currently in use for regulatory planning. Regulatory application guidelines are discussed, as are the limitations and reliabili...

1993-02-01T23:59:59.000Z

135

A User’s Guide to the Comprehensive Water Quality Database for Groundwater in the Vicinity of the Nevada Test Site, Rev. No.: 1  

SciTech Connect

This water quality database (viz.GeochemXX.mdb) has been developed as part of the Underground Test Area (UGTA) Program with the cooperation of several agencies actively participating in ongoing evaluation and characterization activities under contract to the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO). The database has been constructed to provide up-to-date, comprehensive, and quality controlled data in a uniform format for the support of current and future projects. This database provides a valuable tool for geochemical and hydrogeologic evaluations of the Nevada Test Site (NTS) and surrounding region. Chemistry data have been compiled for groundwater within the NTS and the surrounding region. These data include major ions, organic compounds, trace elements, radionuclides, various field parameters, and environmental isotopes. Colloid data are also included in the database. The GeochemXX.mdb database is distributed on an annual basis. The extension ''XX'' within the database title is replaced by the last two digits of the release year (e.g., Geochem06 for the version released during the 2006 fiscal year). The database is distributed via compact disc (CD) and is also uploaded to the Common Data Repository (CDR) in order to make it available to all agencies with DOE intranet access. This report provides an explanation of the database configuration and summarizes the general content and utility of the individual data tables. In addition to describing the data, subsequent sections of this report provide the data user with an explanation of the quality assurance/quality control (QA/QC) protocols for this database.

Farnham, Irene

2006-09-01T23:59:59.000Z

136

Microbiological, Geochemical and Hydrologic Processes Controlling Uranium Mobility: An Integrated Field-Scale Subsurface Research Challenge Site at Rifle, Colorado, Quality Assurance Project Plan  

SciTech Connect

The U.S. Department of Energy (DOE) is cleaning up and/or monitoring large, dilute plumes contaminated by metals, such as uranium and chromium, whose mobility and solubility change with redox status. Field-scale experiments with acetate as the electron donor have stimulated metal-reducing bacteria to effectively remove uranium [U(VI)] from groundwater at the Uranium Mill Tailings Site in Rifle, Colorado. The Pacific Northwest National Laboratory and a multidisciplinary team of national laboratory and academic collaborators has embarked on a research proposed for the Rifle site, the object of which is to gain a comprehensive and mechanistic understanding of the microbial factors and associated geochemistry controlling uranium mobility so that DOE can confidently remediate uranium plumes as well as support stewardship of uranium-contaminated sites. This Quality Assurance Project Plan provides the quality assurance requirements and processes that will be followed by the Rifle Integrated Field-Scale Subsurface Research Challenge Project.

Fix, N. J.

2008-01-07T23:59:59.000Z

137

Prediction of the performance of on-line ash analyzers used in the quality control process of a coal mining system  

Science Conference Proceedings (OSTI)

In this article, an analytical method for the prediction of dual energy transmission performance, based on uncertainty analysis, is proposed. Comparison of theoretically computed errors to those estimated during the trial operation of dual energy transmission analyzers installed in the lignite mines of Megalopolis and Ptolemais (Greece), shows that the developed analytical method for the prediction of dual energy transmission performance is not only accurate but also explanatory, aiding engineers and quality control personnel to realize the capabilities of the analyzer. Also, by taking into consideration the reduced quality variation of mined coal, as a result of the homogenization, which takes place during mining from several benches as well as during transportation, stacking, and reclaiming, the optimal installation position of the analyzer can be selected.

Galetakis, M.; Alevizos, G.; Pavloudakis, F.; Roumpos, C.; Kavouridis, C. [Technical University of Crete, Khania (Greece)

2009-07-01T23:59:59.000Z

138

Microsoft Word - 2011 Pantex Quality Assurance Survey Activity Report _May 2-6, 2011_ final  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PTX-2011-05-06 PTX-2011-05-06 Site: Pantex Plant Subject: Office of Enforcement and Oversight's Office of Safety and Emergency Management Evaluations Activity Report for the Pantex Site Office Quality Assurance Survey Dates of Activity : 05/02/2011 - 05/06/2011 Report Preparer William Macon Activity Description/Purpose: In coordination with the Pantex Site Office (PXSO), the Office of Health, Safety and Security (HSS) site lead participated in a National Nuclear Security Administration (NNSA)/PXSO Quality Assurance Survey (QAS 1) of the contractor's weapon quality program conducted May 2-5, 2011. Result: The HSS site lead participated in the QAS 1 as a member of the survey team and was responsible for reviewing the following Department of Energy/NNSA Weapon Quality Policy (QC-1) elements: 2.1 Risk-Based Program, 2.2 Quality

139

Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan : ASC software quality engineering practices Version 3.0.  

Science Conference Proceedings (OSTI)

The purpose of the Sandia National Laboratories (SNL) Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. Quality is defined in the US Department of Energy/National Nuclear Security Agency (DOE/NNSA) Quality Criteria, Revision 10 (QC-1) as 'conformance to customer requirements and expectations'. This quality plan defines the SNL ASC Program software quality engineering (SQE) practices and provides a mapping of these practices to the SNL Corporate Process Requirement (CPR) 001.3.6; 'Corporate Software Engineering Excellence'. This plan also identifies ASC management's and the software project teams responsibilities in implementing the software quality practices and in assessing progress towards achieving their software quality goals. This SNL ASC Software Quality Plan establishes the signatories commitments to improving software products by applying cost-effective SQE practices. This plan enumerates the SQE practices that comprise the development of SNL ASC's software products and explains the project teams opportunities for tailoring and implementing the practices.

Turgeon, Jennifer L.; Minana, Molly A.; Hackney, Patricia; Pilch, Martin M.

2009-01-01T23:59:59.000Z

140

QC5200 Series User's Guide  

E-Print Network (OSTI)

........................................................................................287 Chapter 9 Encoders TTL encoders

Note: This page contains sample records for the topic "qc quality control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Quality engineering as a profession.  

SciTech Connect

Over the course of time, the profession of quality engineering has witnessed significant change, from its original emphasis on quality control and inspection to a more contemporary focus on upholding quality processes throughout the organization and its product realization activities. This paper describes the profession of quality engineering, exploring how today's quality engineers and quality professionals are certified individuals committed to upholding quality processes and principles while working with different dimensions of product development. It also discusses the future of the quality engineering profession and the future of the quality movement as a whole.

Kolb, Rachel R.; Hoover, Marcey L.

2012-12-01T23:59:59.000Z

142

Quality Portal  

Science Conference Proceedings (OSTI)

... Measurement Quality Assurance Program , coordinated by ... see all Quality programs and projects ... ... Events. 2014 Examiner Training Schedule. NIST ...

2013-05-29T23:59:59.000Z

143

Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan. Part 1 : ASC software quality engineering practices version 1.0.  

SciTech Connect

The purpose of the Sandia National Laboratories (SNL) Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. Quality is defined in DOE/AL Quality Criteria (QC-1) as conformance to customer requirements and expectations. This quality plan defines the ASC program software quality practices and provides mappings of these practices to the SNL Corporate Process Requirements (CPR 1.3.2 and CPR 1.3.6) and the Department of Energy (DOE) document, ASCI Software Quality Engineering: Goals, Principles, and Guidelines (GP&G). This quality plan identifies ASC management and software project teams' responsibilities for cost-effective software engineering quality practices. The SNL ASC Software Quality Plan establishes the signatories commitment to improving software products by applying cost-effective software engineering quality practices. This document explains the project teams opportunities for tailoring and implementing the practices; enumerates the practices that compose the development of SNL ASC's software products; and includes a sample assessment checklist that was developed based upon the practices in this document.

Minana, Molly A.; Sturtevant, Judith E.; Heaphy, Robert; Hodges, Ann Louise; Boucheron, Edward A.; Drake, Richard Roy; Forsythe, Christi A.; Schofield, Joseph Richard, Jr.; Pavlakos, Constantine James; Williamson, Charles Michael; Edwards, Harold Carter

2005-01-01T23:59:59.000Z

144

Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan. Part 1 : ASC software quality engineering practices version 1.0.  

SciTech Connect

The purpose of the Sandia National Laboratories (SNL) Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. Quality is defined in DOE/AL Quality Criteria (QC-1) as conformance to customer requirements and expectations. This quality plan defines the ASC program software quality practices and provides mappings of these practices to the SNL Corporate Process Requirements (CPR 1.3.2 and CPR 1.3.6) and the Department of Energy (DOE) document, ASCI Software Quality Engineering: Goals, Principles, and Guidelines (GP&G). This quality plan identifies ASC management and software project teams' responsibilities for cost-effective software engineering quality practices. The SNL ASC Software Quality Plan establishes the signatories commitment to improving software products by applying cost-effective software engineering quality practices. This document explains the project teams opportunities for tailoring and implementing the practices; enumerates the practices that compose the development of SNL ASC's software products; and includes a sample assessment checklist that was developed based upon the practices in this document.

Minana, Molly A.; Sturtevant, Judith E.; Heaphy, Robert; Hodges, Ann Louise; Boucheron, Edward A.; Drake, Richard Roy; Forsythe, Christi A.; Schofield, Joseph Richard, Jr.; Pavlakos, Constantine James; Williamson, Charles Michael; Edwards, Harold Carter

2005-01-01T23:59:59.000Z

145

Experiences on the Implementation of the 'Energy Balance' Methodology as a Data Quality Control Tool: Application to the Building Energy Consumption of a Large University Campus  

E-Print Network (OSTI)

As the energy costs have been increasing the more energy efficient measures have been promoted in the buildings sector, the reliability of energy consumption data has been attracting significant attention. For example, the reliability of the determination of energy savings depends on that of the energy consumption data, which has to be verified before and after any efficiency measure is applied. From other perspective, verifying energy use data on a regular basis would allow the engineers to identify and assess commissioning opportunities confidently. This paper presents the application of an innovative data screening methodology as a data quality control tool for energy consumption data. The methodology has been applied to a large university campus where the monthly energy consumption, of approximately 100 buildings, must be verified. One of the main responsibilities of the Energy Management Office of the university is to provide monthly utility consumption and cost information to accounting for utility billing of individual buildings. The methodology, which is based on the first law of thermodynamics, or energy conservation, has proved to be an effective data quality screening method for verification of metering sensors when heating, cooling and electricity consumption are separately metered in a building. The methodology is anticipated to be suitable for automated application. In some cases, the methodology could also help to rehabilitate energy use data.

Baltazar-Cervantes, J. C.; Sakurai, Y.; Masuda, H.; Feinauer, D.; Liu, J.; Ji, J.; Claridge, D. E.; Deng, S.; Bruner, H.

2007-01-01T23:59:59.000Z

146

Quality Assurance: Quality Policy  

NLE Websites -- All DOE Office Websites (Extended Search)

Policy Policy It is the policy of the Department of Energy to establish quality requirements to ensure that risks and environmental impacts are minimized and that safety, reliability, and performance are maximized through the application of effective management systems commensurate with the risks posed by the facility or activity and its work. The Department implements this policy through the QA Order and the QA rule directives to ensure quality assurance requirements are clearly specified for the broad spectrum of work performed by DOE and its contractors. Objective The objective of the QA requirements are to establish an effective management system (i.e., quality assurance programs) using the performance requirements coupled technical standards where appropriate that ensure:

147

Quality Management | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Quality Management Quality Management Quality Management The Office of Quality Management, within the Office of Health, Safety and Security develops policies and procedures to ensure the classification and control of information is effective and consistent. The Office of Quality Management also assists other Government agencies to meet the requirements contained in DOE-issued regulations concerning Restricted Data and Formerly Restricted Data. To meet these missions, the Office of Quality Management: Develops and revises DOE Regulations and Orders concerning Restricted Data, Formerly Restricted Data, Transclassified Foreign Nuclear Information, National Security Information, Unclassified Controlled Nuclear Information, and Official Use Only Responds to Mandatory Declassification Review Requests under

148

Toward an interactive article: integrating journals and biological databases  

E-Print Network (OSTI)

. New entities and ambiguities are discovered and resolved by a database curator through a manual quality control (QC) step, along with help from authors via a web form that is provided to them by the journal. New entities discovered through...

Rangarajan, Arun; Schedl, Tim; Yook, Karen; Chan, Juancarlos; Haenel, Stephen; Otis, Lolly; Faelten, Sharon; DePellegrin-Connelly, Tracey; Isaacson, Ruth; Skrzypek, Marek S; Cherry, J M; Sternberg, Paul W; Muller, Hans-Michael

2011-05-19T23:59:59.000Z

149

Quality Assurance Procedures for Mesoscale Meteorological Data  

Science Conference Proceedings (OSTI)

Mesoscale meteorological data present their own challenges and advantages during the quality assurance (QA) process because of their variability in both space and time. To ensure data quality, it is important to perform quality control at many ...

Christopher A. Fiebrich; Cynthia R. Morgan; Alexandria G. McCombs; Peter K. Hall Jr.; Renee A. McPherson

2010-10-01T23:59:59.000Z

150

This document is a preprint of the final paper: Savaghebi, M.; Jalilian, A.; Vasquez, J. C.; Guerrero, J. M.; , "Secondary Control for Voltage Quality Enhancement in Microgrids," Smart Grid, IEEE Transactions on , vol.3, no.4, pp.1893-1902, Dec. 2012. doi  

E-Print Network (OSTI)

.; Guerrero, J. M.; , "Secondary Control for Voltage Quality Enhancement in Microgrids," Smart Grid, IEEE for enhancement of Sensitive Load Bus (SLB) voltage quality in microgrids. The control structure consists control scheme. Index Terms--Distributed Generator (DG), microgrid, voltage harmonics, voltage unbalance

Vasquez, Juan Carlos

151

Dross and Melt Quality Control  

Science Conference Proceedings (OSTI)

Program Organizers: Trond Furu, Hydro Wednesday 8:30 AM March 14, 2012. Room: Northern A4 Location: Dolphin Resort Session Chair: Gerd-Ulrich Gruen,  ...

152

Grid Interactive Quality AC Power Supply With Switching Arm Based Integrated Magnetics For Dynamically Controlled Interconnection Among Multiple Sources And Loads.  

E-Print Network (OSTI)

??The extensive use of nonlinear loads in today’s world has inspired considerable research interest in the area of power quality improvement. This thesis proposes an… (more)

Roy, Sudhin

2010-01-01T23:59:59.000Z

153

Power Quality Hotline Call-of-the-Month for November 2009: Failure of a Lighting-Control System Caused by Electrical Fast Transients (EFTs)  

Science Conference Proceedings (OSTI)

This Call of the Month discusses the basics of lighting-control systems, a recent failure of a lighting-control system caused by a common electrical disturbance, and some solutions to resolving compatibility problems with lighting-control systems.

2009-12-11T23:59:59.000Z

154

Measurement quality assurance  

SciTech Connect

The quality of a radiation protection program can be no better than the quality of the measurements made to support it. In many cases, that quality is unknown and is merely implied on the basis of a calibration of a measuring instrument. If that calibration is inappropriate or is performed improperly, the measurement result will be inaccurate and misleading. Assurance of measurement quality can be achieved if appropriate procedures are followed, including periodic quality control actions that demonstrate adequate performance. Several national measurement quality assurance (MQA) programs are operational or under development in specific areas. They employ secondary standards laboratories that provide a high-quality link between the National Bureau of Standards and measurements made at the field use level. The procedures followed by these secondary laboratories to achieve MQA will be described, as well as plans for similar future programs. A growing general national interest in quality assurance, combined with strong specific motivations for MQA in the area of ionizing radiation, will provide continued demand for appropriate national programs. Such programs must, however, employ procedures that are cost effective and must be developed with participation by all affected parties.

Eisenhower, E.H.

1988-08-01T23:59:59.000Z

155

Quality Policy  

NLE Websites -- All DOE Office Websites (Extended Search)

Policy110406 Page 1 of 3 EOTA - System Level Document Title: Quality Policy Document Number: Q-002 Rev. 110406 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero...

156

Louisiana Air Control Law (Louisiana)  

Energy.gov (U.S. Department of Energy (DOE))

This law states regulations for air quality control and states the powers and duties of the secretary of environmental quality. It provides information about permits and licenses, air quality...

157

ARM - Data Announcements Article  

NLE Websites -- All DOE Office Websites (Extended Search)

November 26, 2010 [Data Announcements] November 26, 2010 [Data Announcements] Radiatively Important Parameters Best Estimate Data Available for Southern Great Plains Bookmark and Share The upper panel shows the output aerosol extinction field in RIPBE, and the bottom panel shows the quality control (qc) flags on aerosol extinction. Descriptions of the qc flags are given in the netCDF file header. In this case, the gold and pink qc flags on the aerosol extinction indicate periods at the top of the aerosol profile where data were missing in the input file. These data points are marked as indeterminate, and RIPBE either interpolates over the missing data (gold) or uses the closest good value (pink). The upper panel shows the output aerosol extinction field in RIPBE, and the bottom panel shows the quality control (qc) flags on aerosol extinction.

158

Environmental quality  

SciTech Connect

Major emphasis is placed on man environment interactions and environment management. Topics include: ecology and living resources; the global environment; water and air quality; toxic substances and environmental health; energy; natural resources; NEPA regulations; and land use.

1980-12-01T23:59:59.000Z

159

Air Quality  

NLE Websites -- All DOE Office Websites (Extended Search)

What We Monitor & Why » What We Monitor & Why » Air Quality Air Quality To preserve our existing wilderness-area air quality, LANL implements a conscientious program of air monitoring. April 12, 2012 Real-time data monitoring for particulate matter An air monitoring field team member tests one of LANL's tapered element oscillating microbalance samplers, which collects real-time particulate matter data. Contact Environmental Communication & Public Involvement P.O. Box 1663 MS M996 Los Alamos, NM 87545 (505) 667-0216 Email LANL monitors air quality 24 hours a day, 365 days a year. Why we monitor air LANL monitors many different pathways in order to assess their impact on workers, the public, animals, and plants. We monitor the air around the Laboratory to ensure our operations are not affecting the air of nearby

160

Environmental Monitoring Program Quality Assurance Project Plan  

SciTech Connect

The Quality Assurance Project Plan (QAPP) is intended to document the quality assurance of the Environmental Monitoring Program. The Quality Assurance Project Plan has two parts and is written to become a chapter in the Environmental Monitoring Plan. Part A describes the management responsibilities and activities performed to assure the quality of the Environmental Monitoring Program. Part B covers the documentation requirements for changes in the Monitoring Program, and provides details on control of the design and implementation of quality assurance activities.

Holland, R.C.

1993-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "qc quality control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

APPLICATION OF CONDITIONAL SIMULATION MODEL TO RUN-OF-MINE COAL SAMPLING FREQUENCY DETERMINATION AND COAL QUALITY CONTROL AT THE POWER PLANT (BLENDING, GOAL PROGRAMMING, MICROCOMPUTER).  

E-Print Network (OSTI)

??Run-of-mine (ROM) coal sampling is one of the most important factors in determining the disposition of ROM coal for an overall emission control strategy. Determination… (more)

BARUA, SUKHENDU LAL.

1985-01-01T23:59:59.000Z

162

Factors controlling reservoir quality in tertiary sandstones and their significance to geopressured geothermal production. Annual report, May 1, 1979-May 31, 1980  

DOE Green Energy (OSTI)

Differing extents of diagenetic modification is the factor primarily responsible for contrasting regional reservoir quality of Tertiary sandstones from the Upper and Lower Texas Gulf Coast. Detailed comparison of Frio sandstones from the Chocolate Bayou/Danbury Dome area, Brazoria County, and Vicksburg sandstones from the McAllen Ranch Field area, Hidalgo County, reveals that extent of diagenetic modification is most strongly influenced by (1) detrital mineralogy and (2) regional geothermal gradients. Vicksburg sandstones from the McAllen Ranch Field area are less stable, chemically and mechanically, than Frio sandstones from the Chocolate Bayou/Danbury dome area. Vicksburg sandstones are mineralogically immature and contain greater proportions of feldspars and rock fragments than do Frio sandstones. Thr reactive detrital assemblage of Vicksubrg sandstones is highly susceptible to diagenetic modification. Susceptibility is enhanced by higher than normal geothermal gradients in the McAllen Ranch Field area. Thus, consolidation of Vicksburg sandstones began at shallower depth of burial and precipitation of authigenic phases (especially calcite) was more pervasive than in Frio sandstones. Moreover, the late-stage episode of ferroan calcite precipitation that occluded most secondary porosity in Vicksburg sandstones did not occur significantly in Frio sandstones. Therefore, regional reservoir quality of Frio sandstones from Brazoria County is far better than that characterizing Vicksburg sandstones from Hidalgo County, especially at depths suitable for geopressured geothermal energy production.

Loucks, R.G.; Richmann, D.L.; Milliken, K.L.

1980-07-01T23:59:59.000Z

163

DOE Order on Quality Assurance  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

INITIATED BY: INITIATED BY: www.directives.doe.gov Office of Health, Safety and Security U.S. Department of Energy ORDER Washington, D.C. Approved: 4-25-2011 SUBJECT: QUALITY ASSURANCE 1. PURPOSE. a. To ensure that Department of Energy (DOE), including National Nuclear Security Administration (NNSA), products and services meet or exceed customers' requirements and expectations. b. To achieve quality for all work based upon the following principles: (1) All work, as defined in this Order, is conducted through an integrated and effective management system; (2) Management support for planning, organization, resources, direction, and control is essential to quality assurance (QA); (3) Performance and quality improvement require thorough, rigorous

164

Regulations for Air Quality (Quebec, Canada)  

Energy.gov (U.S. Department of Energy (DOE))

This Regulation establishes emission standards for particulates and gases, emission opacity standards, standards of air quality and control measures to prevent, eliminate or reduce the emission of...

165

Urban and Regional Air Quality  

NLE Websites -- All DOE Office Websites (Extended Search)

equipment equipment Urban and Regional Air Quality Research in this area is concerned with regional air quality issues such as: Controlling nitrogen oxides (NOx) and volatile organic compounds, to manage tropospheric ozone pollution. Hazardous air pollutants: using science to base standards on rigorously studied risks. Air quality and climate: how does climate influence air quality at a regional or local level? Current modeling practices often do not capture variations in pollutants such as ozone-they represent a limited sample of the diverse meteorology and human behavior that affect air pollution. Improved modeling of regional air quality will help understand variability, reveal patterns of behavior, and pollutant transport issues. Controlled experiments in lab and field can help validate improved models.

166

Quality Assurance: Underlying Quality Principles  

NLE Websites -- All DOE Office Websites (Extended Search)

Underlying Quality Principles Underlying Quality Principles These principles are consistent with Integrated Safety Management Policy, P 450.4A and support ISM implementation. Define Policies and Objectives--Ensure they are Understood and Accepted. Management must set expectations for the organization as a whole before employees can do their jobs, satisfy their customers, and strive to improve the quality of their work. This is accomplished by developing and implementing specific policies and objectives that reflect the operating philosophy of the facility's management. Once these policies and objectives have been established, all managers must take the necessary actions to ensure that each employee shares their vision of the organization's purpose. Specify Roles and Responsibilities--Ensure they are Understood and Accepted.

167

Laboratory Management (Quality) Systems  

Science Conference Proceedings (OSTI)

Laboratory Management (Quality) Systems. NISTIR 7028 Type Evaluation Quality Manual Template. This NISTIR has been ...

2012-05-02T23:59:59.000Z

168

Workshop on indoor air quality research needs  

Science Conference Proceedings (OSTI)

Workshop participants report on indoor air quality research needs including the monitoring of indoor air quality, report of the instrumentation subgroup of indoor air quality, health effects, and the report of the control technology session. Risk analysis studies addressing indoor environments were also summarized. (DLS)

Not Available

1980-01-01T23:59:59.000Z

169

The Multi-Scale Mass Transfer Processes Controlling Natural Attenuation and Engineered Remediation: An IFC Focused on Hanford’s 300 Area Uranium Plume Quality Assurance Project Plan  

Science Conference Proceedings (OSTI)

The purpose of the project is to conduct research at an Integrated Field-Scale Research Challenge Site in the Hanford Site 300 Area, CERCLA OU 300-FF-5 (Figure 1), to investigate multi-scale mass transfer processes associated with a subsurface uranium plume impacting both the vadose zone and groundwater. The project will investigate a series of science questions posed for research related to the effect of spatial heterogeneities, the importance of scale, coupled interactions between biogeochemical, hydrologic, and mass transfer processes, and measurements/approaches needed to characterize a mass-transfer dominated system. The research will be conducted by evaluating three (3) different hypotheses focused on multi-scale mass transfer processes in the vadose zone and groundwater, their influence on field-scale U(VI) biogeochemistry and transport, and their implications to natural systems and remediation. The project also includes goals to 1) provide relevant materials and field experimental opportunities for other ERSD researchers and 2) generate a lasting, accessible, and high-quality field experimental database that can be used by the scientific community for testing and validation of new conceptual and numerical models of subsurface reactive transport.

Fix, N. J.

2008-01-31T23:59:59.000Z

170

Louisiana Water Control Law (Louisiana) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Control Law. This law states regulations for water quality control and states the powers and duties of the secretary of environmental quality. It provides information about...

171

Mixture-process variable approach to optimize a microemulsion electrokinetic chromatography method for the quality control of a nutraceutical based on coenzyme Q10  

SciTech Connect

In recent years, multivariate optimization has played an increasing role in analytical method development. ICH guidelines recommend using statistical design of experiments to identify the design space, in which multivariate combinations of composition variables and process variables have been demonstrated to provide quality results. Considering a microemulsion electrokinetic chromatography method (MEEKC), the performance of the electrophoretic run depends on the proportions of mixture components (MCs) of the microemulsion and on the values of process variables (PVs). In the present work, for the first time in the literature, a mixture-process variable (MPV) approach was applied to optimize a MEEKC method for the analysis of coenzyme Q10 (Q10), ascorbic acid (AA), and folic acid (FA) contained in nutraceuticals. The MCs (buffer, surfactant-cosurfactant, oil) and the PVs (voltage, buffer concentration, buffer pH) were simultaneously changed according to a MPV experimental design. A 62-run MPV design was generated using the I-optimality criterion, assuming a 46-term MPV model allowing for special-cubic blending of the MCs, quadratic effects of the PVs, and some MC-PV interactions. The obtained data were used to develop MPV models that express the performance of an electrophoretic run (measured as peak efficiencies of Q10, AA, and FA) in terms of the MCs and PVs. Contour and perturbation plots were drawn for each of the responses. Finally, the MPV models and criteria for the peak efficiencies were used to develop the design space and an optimal subregion (i.e., the settings of the mixture MCs and PVs that satisfy the respective criteria), as well as a unique optimal combination of MCs and PVs.

Piepel, Gregory F.; Pasquini, Benedetta; Cooley, Scott K.; Heredia-Langner, Alejandro; Orlandini, Serena; Furlanetto, Sandra

2012-08-15T23:59:59.000Z

172

NETL: IEP - Air Quality Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Home > Technologies > Coal & Power Systems > Innovations for Existing Plants > Air Quality Research Home > Technologies > Coal & Power Systems > Innovations for Existing Plants > Air Quality Research Innovations for Existing Plants Air Quality Research Ambient Monitoring Emissions Characterization Predictive Modeling & Evaluation Health Effects Regulatory Drivers Air Quality Research Reference Shelf The NETL Air Quality Research program is designed to resolve the scientific uncertainties associated with the atmospheric formation, distribution, and chemical transformation of pollutant emissions from today's coal-fired power plants, and to obtain a realistic assessment of the human health impacts of these emissions. Results of this research will help the DOE Office of Fossil Energy address policy questions regarding coal plant emissions and provide guidance for future emissions control R&D programs at

173

Steam Quality  

E-Print Network (OSTI)

"STEAM QUALITY has been generally defined as the amount of moisture/vapor (or lack thereof) contained within steam produced from some form of boiler. It has long been used as the standard term for the measurement of ""wet or dry"" steam and as a means of measuring enthalpy. Totally dry steam is said to be ""saturated"" steam. It is sometimes defined as the ""dryness faction"". The term in its historical denotation refers to a physical attribute of the steam. That attribute being ""what is the percentage water vapor content of the steam"" as compared to the amount of steam. Dry saturated steam is steam which carries no water vapor with it and is defined as having a quality of 1.00 (100%). Since water vapor is always present at the interface between the water level and the steam in a boiler, some water vapor will always tend to pass through the system with the steam. Hence, a continuing problem. If steam does carry water vapor past the separators it will tend to coalesce as a liquid, and in doing so it also will carry boiler chemicals with it."

Johnston, W.

1989-09-01T23:59:59.000Z

174

NREL: Environment, Safety, Health and Quality - Quality  

NLE Websites -- All DOE Office Websites (Extended Search)

expertise, and supporting infrastructure required to deliver quality research, products, services, and work processes by implementing our Quality Assurance Program. Using this...

175

SAPHIRE 8 Software Quality Assurance Oversight  

SciTech Connect

The software quality assurance oversight consists of updating and maintaining revision control of the SAPHIRE 8 quality assurance program documentation and of monitoring revision control of the SAPHIRE 8 source code. This report summarizes the oversight efforts through description of the revision control system (RCS) setup, operation and contents. Documents maintained under revision control include the Acceptance Test Plan (ATP), Configuration Management Plan, Quality Assurance Plan, Software Project Plan, Requirements Traceability Matrix (RTM), System Test Plan, SDP Interface Training Manual, and the SAPHIRE 8, 'New Features and Capabilities Overview'.

Kurt G. Vedros

2011-09-01T23:59:59.000Z

176

Air Quality: Acronym List Department: Chemical and General Safety  

E-Print Network (OSTI)

: Program Manager Authority: ES&H Manual, Chapter 30, Air Quality1 ACM asbestos-containing material AHA areaAir Quality: Acronym List Department: Chemical and General Safety Program: Air Quality Owner hazard analysis AQPM air quality program manager ARP accidental release prevention ATCM air toxic control

Wechsler, Risa H.

177

Review and Assessment of Air Quality Management Activities in Texas  

Science Conference Proceedings (OSTI)

Many air quality studies indicate that ozone, fine particulates, and haze are interrelated and often regional in extent. Emission management strategies to mitigate these pollutants are likely to involve regional control measures. This report summarizes recent air quality studies in the State of Texas to support the development of integrated air quality management strategies to meet new air quality standards.

1999-07-02T23:59:59.000Z

178

Carbon Technology III: Anode Quality Control - TMS  

Science Conference Proceedings (OSTI)

A fully automatic method for image analysis of porosity in baked carbon anodes has been developed. The method is based on optical microscopy, and is ...

179

New Reference Material Supports Improved Quality Control ...  

Science Conference Proceedings (OSTI)

... In a tour de force of measurement science, researchers at the National Institute of Standards and Technology (NIST) have developed and issued for ...

2012-10-18T23:59:59.000Z

180

MATHEMATICAL PROGRAMMING MODELS FOR ENVIRONMENTAL QUALITY CONTROL  

E-Print Network (OSTI)

-Vietnam, may 2010 ARCH EFFECT OF CURVED GRAVITY DAMS ( *) Tobias GEBLER Dipl.-Ing., University Stuttgart GERMANY 1. INTRODUCTION Since 1890 more than 80 gravity dams have been constructed in Germany. The oldest was chosen over masonry as the preferred method of construction. Gravity dams resist external loads by virtue

Greenberg, Harvey J.

Note: This page contains sample records for the topic "qc quality control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Comparison of multimarker logistic regression models, with application to a genomewide scan of schizophrenia.  

E-Print Network (OSTI)

with asymptotics do not explain the pattern of ?^ seen above, since the multimarker model with fewest parameters has the higher inflation in the med- ian. Other quality control factors could be responsible, but the pre-study QC step should have gone some way... , for example the window on chromosome 16 starting at rs17618203 using the haplotype test, actually become more significant after correction; others are cor- rected by an order of magnitude or more. QC of top ranked windows We examined quality control statistics...

Wason, James M S; Dudbridge, Frank

2010-09-09T23:59:59.000Z

182

Providing quality of service of information through mobility  

Science Conference Proceedings (OSTI)

This paper develops mobility control strategies for robotic agents to provide quality of service of information while carrying out active sensing tasks. Like wireless communication concepts of quality of service, a new metric is developed to encapsulate ...

Eric W. Frew

2009-06-01T23:59:59.000Z

183

Environmental Quality: Air (Louisiana)  

Energy.gov (U.S. Department of Energy (DOE))

The Department of Environmental Quality regulates air quality in Louisiana. The Department has an established a fee system for funding the monitoring, investigation and other activities required...

184

DOE Federal Quality Council  

NLE Websites -- All DOE Office Websites (Extended Search)

Assurance Office of Nuclear Safety Home Office of Quality Assurance Home Policy and Directives Software Quality Assurance SQA Home Central Registry Safety Software...

185

Data Quality of Quality Measurement Experiments  

NLE Websites -- All DOE Office Websites (Extended Search)

Data Quality of Quality Measurement Experiments Data Quality of Quality Measurement Experiments S. Bottone and S. Moore Mission Research Corporation Santa Barbara, California Introduction Quality Measurement Experiments (QME) are a special class of Value-Added Products (VAP). QMEs add value to Atmospheric Radiation Measurement (ARM) Program datastreams by providing for continuous assessment of the quality of incoming data based on internal consistency checks, comparisons between independent similar measurements, or comparisons between measurements and modeled results. Like any datastream, QME datastreams need to be checked for data quality. For each QME, we analyze a representative sample of files from the ARM data archive to determine 'typical' values of the QME variables. We then design outlier tests, specific to each variable, to be applied to

186

Analytical laboratory quality audits  

SciTech Connect

Analytical Laboratory Quality Audits are designed to improve laboratory performance. The success of the audit, as for many activities, is based on adequate preparation, precise performance, well documented and insightful reporting, and productive follow-up. Adequate preparation starts with definition of the purpose, scope, and authority for the audit and the primary standards against which the laboratory quality program will be tested. The scope and technical processes involved lead to determining the needed audit team resources. Contact is made with the auditee and a formal audit plan is developed, approved and sent to the auditee laboratory management. Review of the auditee's quality manual, key procedures and historical information during preparation leads to better checklist development and more efficient and effective use of the limited time for data gathering during the audit itself. The audit begins with the opening meeting that sets the stage for the interactions between the audit team and the laboratory staff. Arrangements are worked out for the necessary interviews and examination of processes and records. The information developed during the audit is recorded on the checklists. Laboratory management is kept informed of issues during the audit so there are no surprises at the closing meeting. The audit report documents whether the management control systems are effective. In addition to findings of nonconformance, positive reinforcement of exemplary practices provides balance and fairness. Audit closure begins with receipt and evaluation of proposed corrective actions from the nonconformances identified in the audit report. After corrective actions are accepted, their implementation is verified. Upon closure of the corrective actions, the audit is officially closed.

Kelley, William D.

2001-06-11T23:59:59.000Z

187

Quality System Documentation Management  

Science Conference Proceedings (OSTI)

Quality System Documentation Management. ... Minutes, summaries, or notes from Management Meetings of significance are archived here. ...

2012-08-21T23:59:59.000Z

188

Manual on indoor air quality  

Science Conference Proceedings (OSTI)

This reference manual was prepared to assist electric utilities in helping homeowners, builders, and new home buyers to understand a broad range of issues related to indoor air quality. The manual is directed to technically knowledgeable persons employed by utility companies - the customer service or marketing representative, applications engineer, or technician - who may not have specific expertise in indoor air quality issues. In addition to providing monitoring and control techniques, the manual summarizes the link between pollutant concentrations, air exchange, and energy conservation and describes the characteristics and health effects of selected pollutants. Where technical information is too lengthy or complex for inclusion in this volume, reference sources are given. Information for this manual was gathered from technical studies, manufacturers' information, and other materials from professional societies, institutes, and associations. The aim has been to provide objective technical and descriptive information that can be used by utility personnel to make informed decisions about indoor air quality issues.

Diamond, R.C.; Grimsrud, D.T.

1983-12-01T23:59:59.000Z

189

Lighting Control Systems  

Science Conference Proceedings (OSTI)

The demand for lighting control systems in residential, commercial, and industrial facilities is on the rise with the demand for increased energy savings. With lighting accounting for almost 23% of grid load, there is significant opportunity to reduce lighting load while improving the quality of light for customers. Lighting control systems are becoming more intelligent as the need for them to interface with building control systems and demand response systems also increases. Lighting control systems use...

2009-12-17T23:59:59.000Z

190

Downhole steam quality measurement  

SciTech Connect

An empirical method for the remote sensing of steam quality that can be easily adapted to downhole steam quality measurements by measuring the electrical properties of two-phase flow across electrode grids at low frequencies.

Lee, David O. (Albuquerque, NM); Montoya, Paul C. (Albuquerque, NM); Muir, James F. (Albuquerque, NM); Wayland, Jr., J. Robert (Albuquerque, NM)

1987-01-01T23:59:59.000Z

191

Quantifying software quality  

Science Conference Proceedings (OSTI)

In Software Quality Assurance the quality of the program must be defined in practical and measurable terms. This is accomplished by first standardizing the error reporting technique, identifying the types and frequency of occurrence of software errors ...

Kenneth S. Hendis

1981-01-01T23:59:59.000Z

192

FAQS Qualification Card - Quality Assurance | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Qualification Card - Quality Assurance Qualification Card - Quality Assurance FAQS Qualification Card - Quality Assurance A key element for the Department's Technical Qualification Programs is a set of common Functional Area Qualification Standards (FAQS) and associated Job Task Analyses (JTA). These standards are developed for various functional areas of responsibility in the Department, including oversight of safety management programs identified as hazard controls in Documented Safety Analyses (DSA). For each functional area, the FAQS identify the minimum technical competencies and supporting knowledge and skills for a typical qualified individual working in the area. FAQC-QualityAssurance.docx Description Quality Assurance Qualification Card More Documents & Publications FAQS Gap Analysis Qualification Card - Quality Assurance

193

Final Report - Recovery Act - Development and application of processing and process control for nano-composite materials for lithium ion batteries  

SciTech Connect

Oak Ridge National Laboratory and A123 Systems, Inc. collaborated on this project to develop a better understanding, quality control procedures, and safety testing for A123 System s nanocomposite separator (NCS) technology which is a cell based patented technology and separator. NCS demonstrated excellent performance. x3450 prismatic cells were shown to survive >8000 cycles (1C/2C rate) at room temperature with greater than 80% capacity retention with only NCS present as an alternative to conventional polyolefin. However, for a successful commercialization, the coating conditions required to provide consistent and reliable product had not been optimized and QC techniques for being able to remove defective material before incorporation into a cell had not been developed. The work outlined in this report addresses these latter two points. First, experiments were conducted to understand temperature profiles during the different drying stages of the NCS coating when applied to both anode and cathode. One of the more interesting discoveries of this study was the observation of the large temperature decrease experienced by the wet coating between the end of the infrared (IR) drying stage and the beginning of the exposure to the convection drying oven. This is not a desirable situation as the temperature gradient could have a deleterious effect on coating quality. Based on this and other experimental data a radiative transfer model was developed for IR heating that also included a mass transfer module for drying. This will prove invaluable for battery coating optimization especially where IR drying is being employed. A stress model was also developed that predicts that under certain drying conditions tensile stresses are formed in the coating which could lead to cracking that is sometimes observed after drying is complete. Prediction of under what conditions these stresses form is vital to improving coating quality. In addition to understanding the drying process other parameters such as slurry quality and equipment optimization were examined. Removal of particles and gels by filtering, control of viscosity by %solids and mixing adjustments, removal of trapped gas in the slurry and modification of coater speed and slot die gap were all found to be important for producing uniform and flaw-free coatings. Second, an in-line Hi-Pot testing method has been developed specifically for NCS that will enable detection of coating flaws that could lead to soft or hard electrical shorts within the cell. In this way flawed material can be rejected before incorporation into the cell thus greatly reducing the amount of scrap that is generated. Improved battery safety is an extremely important benefit of NCS. Evaluation of battery safety is usually accomplished by conducting a variety of tests including nail penetration, hot box, over charge, etc. For these tests entire batteries must be built but the resultant temperature and voltage responses reveal little about the breakdown mechanism. In this report is described a pinch test which is used to evaluate NCS quality at various stages including coated anode and cathode as well as assembled cell. Coupled with post-microscopic examination of the damaged pinch point test data can assist in the coating optimization from an improved end-use standpoint. As a result of this work two invention disclosures, one for optimizing drying methodology and the other for an in-line system for flaw detection, have been filed. In addition, 2 papers are being written for submission to peer-reviewed journals.

Daniel, Claus [ORNL; Armstrong, Beth L [ORNL; Maxey, L Curt [ORNL; Sabau, Adrian S [ORNL; Wang, Hsin [ORNL; Hagans, Patrick [A123 Systems, Inc.; Babinec, Sue [A123 Systems, Inc.

2013-08-01T23:59:59.000Z

194

Analysing and controlling the tax evasion dynamics via majority-vote model  

E-Print Network (OSTI)

Within the context of agent-based Monte-Carlo simulations, we study the well-known majority-vote model (MVM) with noise applied to tax evasion on simple square lattices, Voronoi-Delaunay random lattices, Barabasi-Albert networks, and Erd\\"os-R\\'enyi random graphs. In the order to analyse and to control the fluctuations for tax evasion in the economics model proposed by Zaklan, MVM is applied in the neighborhod of the noise critical $q_{c}$. The Zaklan model had been studied recently using the equilibrium Ising model. Here we show that the Zaklan model is robust and can be reproduced also through the nonequilibrium MVM on various topologies.

Lima, F W S

2009-01-01T23:59:59.000Z

195

Document Control Process  

NLE Websites -- All DOE Office Websites (Extended Search)

1 Document Control Process 11_0304 Page 1 of 7 1 Document Control Process 11_0304 Page 1 of 7 EOTA - Business Process Document Title: Document Control Process Document Number: P-001 Rev 11_0304 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: Q-001, Quality Manual Notify of Changes: EOTA Employees Referenced Document(s): F-001 Document Control Template - Process, F-002 Document Control Template - Instruction, F-003 Document Control Template - Screenshot, F-004 Document Control Template - Form, F-005 Document Control Template - Form - Excel, MGTP-002 Skill Set Model, Q-003 EOTA Processes: Sequence and Interaction, P-003, Control of Records P-001 Document Control Process 11_0304 Page 2 of 7 Revision History: Rev. Description of Change

196

University of Colorado Indoor Air Quality Report  

NLE Websites -- All DOE Office Websites (Extended Search)

Image Courtesy of Ohio Image Courtesy of Ohio State University INDOOR AIR QUALITY Design Goals Design Goals Design Goals Design Goals Integrate technologically and economically innovative, low-energy strategies Minimize occupant distraction User-friendly controls Minimize pollutant sources Bio Bio Bio Bio- - - -S S S S ( ( ( (h h h h) ) ) ) ip ip ip ip indoor air quality features indoor air quality features indoor air quality features indoor air quality features Mechanical Systems Energy Recovery Ventilator Exhaust Fans Heating And Cooling Systems Passive Ventilation Low VOC materials Each of these features is described in more detail below. Mechanical Systems Energy Recovery Ventilator Knowing that our home has a tight envelope, due to our Bio-SIP construction, we needed to use mechanical ventilation to ensure suitable indoor air

197

Quality assurance for gamma knives  

SciTech Connect

This report describes and summarizes the results of a quality assurance (QA) study of the Gamma Knife, a nuclear medical device used for the gamma irradiation of intracranial lesions. Focus was on the physical aspects of QA and did not address issues that are essentially medical, such as patient selection or prescription of dose. A risk-based QA assessment approach was used. Sample programs for quality control and assurance are included. The use of the Gamma Knife was found to conform to existing standards and guidelines concerning radiation safety and quality control of external beam therapies (shielding, safety reviews, radiation surveys, interlock systems, exposure monitoring, good medical physics practices, etc.) and to be compliant with NRC teletherapy regulations. There are, however, current practices for the Gamma Knife not covered by existing, formalized regulations, standards, or guidelines. These practices have been adopted by Gamma Knife users and continue to be developed with further experience. Some of these have appeared in publications or presentations and are slowly finding their way into recommendations of professional organizations.

Jones, E.D.; Banks, W.W.; Fischer, L.E. [Lawrence Livermore National Lab., CA (United States)

1995-09-01T23:59:59.000Z

198

Waste Management Quality Assurance Plan  

SciTech Connect

Lawrence Berkeley Laboratory`s Environment Department addresses its responsibilities through activities in a variety of areas. The need for a comprehensive management control system for these activities has been identified by the Department of Energy (DOE). The WM QA (Waste Management Quality Assurance) Plan is an integral part of a management system that provides controls necessary to ensure that the department`s activities are planned, performed, documented, and verified. This WM QA Plan defines the requirements of the WM QA program. These requirements are derived from DOE Order 5700.6C, Quality Assurance, the LBL Operating and Assurance Program Plan (OAP, LBL PUB-3111), and other environmental compliance documents applicable to WM activities. The requirements presented herein, as well as the procedures and methodologies that direct the implementation of these requirements, will undergo review and revisions as necessary. The provisions of this QA Plan and its implementing documents apply to quality-affecting activities performed by and for WM. It is also applicable to WM contractors, vendors, and other LBL organizations associated with WM activities, except where such contractors, vendors, or organizations are governed by their own WM-approved QA programs. References used in the preparation of this document are (1) ASME NQA-1-1989, (2) ANSI/ASQC E4 (Draft), (3) Waste Management Quality Assurance Implementing Management Plan (LBL PUB-5352, Rev. 1), (4) LBL Operating and Assurance Program Plan (OAP), LBL PUB-3111, 2/3/93. A list of terms and definitions used throughout this document is included as Appendix A.

Not Available

1993-11-30T23:59:59.000Z

199

Quality Manual-sample  

NLE Websites -- All DOE Office Websites (Extended Search)

Q-001 Quality Manual 11_0329 Page 1 of 33 Q-001 Quality Manual 11_0329 Page 1 of 33 EOTA - Quality Manual Document Title: Quality Manual Document Number: Q-001 Rev. 11_0329 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: N/A Notify of Changes: EOTA Employees Referenced Document(s): Various Q-001 Quality Manual 11_0329 Page 2 of 33 Revision History: Rev. Level Description of Change A Initial Release B Section V - added justification for exclusion "....because EOTA does not require the use of monitoring and measurement devices in the conduct of business." 07_1205 Added MGTP-004, Employee Satisfaction to Quality Manual 08_0818 Changed P-008 from Corrective Action and Preventive Action to read Corrective/Preventive Action & Improvement Opportunity

200

Downhole steam quality measurement  

DOE Patents (OSTI)

The present invention relates to an empirical electrical method for remote sensing of steam quality utilizing flow-through grids which allow measurement of the electrical properties of a flowing two-phase mixture. The measurement of steam quality in the oil field is important to the efficient application of steam assisted recovery of oil. Because of the increased energy content in higher quality steam it is important to maintain the highest possible steam quality at the injection sandface. The effectiveness of a steaming operation without a measure of steam quality downhole close to the point of injection would be difficult to determine. Therefore, a need exists for the remote sensing of steam quality.

Lee, D.O.; Montoya, P.C.; Muir, J.F.; Wayland, J.R. Jr.

1985-06-19T23:59:59.000Z

Note: This page contains sample records for the topic "qc quality control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Adolescent type 1 Diabetes cardio-renal Intervention Trial (AdDIT)  

E-Print Network (OSTI)

to the centralized database. Study databases are developed "in house" and incorporate quality control (QC) checks to ensure accurate data entry data. Standard- ized CRFs have been developed for use in all centers. Results from the Central Laboratory for screened... and details of local methods, normal ranges, QC and QA will be obtained during site set up visits and confirmed during monitoring visits. 3-monthly HbA1c will be also assessed in local lab- oratories, using DCCT aligned methods. Cardiovascular assessments c...

Adolescent type 1 Diabetes cardio-renal Intervention Trial Research Group

2009-12-17T23:59:59.000Z

202

Indoor Air Quality Group  

Science Conference Proceedings (OSTI)

... CONTAM has been used at NIST to study the indoor air quality impacts of HVAC systems in single-family residential buildings, ventilation in large ...

2011-10-31T23:59:59.000Z

203

School quality and wages  

E-Print Network (OSTI)

This dissertation examines the literature that attempts to measure the relationship between school quality and earnings. I begin by developing a simple economic model that predicts that, everything else being equal and with comparisons being made within a market, workers from higher quality schools will have higher earnings among those with the same level of schooling and they will have steeper schooling-earnings gradients. The remainder of this dissertation explores problems that exist in this literature for which no solutions have been presented. These problems include: 1) there doesn�t have to be a direct and positive relationship between school quality and earnings; 2) the data suggest that school quality measures are frequently mismatched to workers; 3) most school quality studies include college-trained labor while completely ignoring the quality of the college attended; 4) the omission of college quality from the estimation is especially problematic for studies that attempt to measure the school quality-earnings relationship through differences in schooling-earnings gradients for those educated in different systems; 5) state of birth wage rankings thought to capture a school quality effect are not invariant to the market (state of residence) in which they are evaluated; and 6) the evidence presented herein suggests that interstate migration is selective. These problems undermine the credibility of existing estimates of a school qualityearnings relationship.

Speakman, Robert B., Jr.

2006-12-01T23:59:59.000Z

204

Iris Image Quality Reading  

Science Conference Proceedings (OSTI)

... A method for selecting and ranking quality metrics for optimization of biometrie ... v 4679 LNCS, p 145-152, 2007, Energy Minimization Methods in ...

2011-06-06T23:59:59.000Z

205

US Biofuels Quality Update  

Science Conference Proceedings (OSTI)

... US Biofuels Quality Update Teresa L. Alleman ... 4 Biodiesel Station Locations • Biodiesel is an advanced biofuel under RFS and is sold everywhere ...

2013-08-28T23:59:59.000Z

206

Office of Quality Management  

NLE Websites -- All DOE Office Websites (Extended Search)

Data. To meet these missions, the Office of Quality Management: Develops and revises DOE Regulations and Orders concerning Restricted Data, Formerly Restricted Data,...

207

Available Technologies: Ventilation Controller for Improved Indoor ...  

Iain Walker and colleagues at Berkeley Lab have developed a dynamic control system for whole-house ventilation fans that provides maximal air quality while reducing ...

208

Louisiana Hazardous Waste Control Law (Louisiana)  

Energy.gov (U.S. Department of Energy (DOE))

The Louisiana Department of Environmental Quality is responsible for administering the Louisiana Hazardous Waste Control Law and the regulations created under that law.

209

Power quality disturbances classification based on S-transform and probabilistic neural network  

Science Conference Proceedings (OSTI)

Classifying power quality (PQ) disturbances is one of the most important issues for power quality control. A novel high-performance classification system based on the S-transform and a probabilistic neural network (PNN) is proposed. The original power ... Keywords: Power quality, Power quality disturbances, Probabilistic neural network, S-transform

Nantian Huang; Dianguo Xu; Xiaosheng Liu; Lin Lin

2012-12-01T23:59:59.000Z

210

FAQS Qualification Card - Weapon Quality Assurance | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Weapon Quality Assurance Weapon Quality Assurance FAQS Qualification Card - Weapon Quality Assurance A key element for the Department's Technical Qualification Programs is a set of common Functional Area Qualification Standards (FAQS) and associated Job Task Analyses (JTA). These standards are developed for various functional areas of responsibility in the Department, including oversight of safety management programs identified as hazard controls in Documented Safety Analyses (DSA). For each functional area, the FAQS identify the minimum technical competencies and supporting knowledge and skills for a typical qualified individual working in the area. FAQC-WeaponQualityAssurance.docx Description Weapon Quality Assurance Qualification Card More Documents & Publications DOE-STD-1025-2008

211

FAQS Qualification Card - Safety Software Quality Assurance | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Safety Software Quality Assurance Safety Software Quality Assurance FAQS Qualification Card - Safety Software Quality Assurance A key element for the Department's Technical Qualification Programs is a set of common Functional Area Qualification Standards (FAQS) and associated Job Task Analyses (JTA). These standards are developed for various functional areas of responsibility in the Department, including oversight of safety management programs identified as hazard controls in Documented Safety Analyses (DSA). For each functional area, the FAQS identify the minimum technical competencies and supporting knowledge and skills for a typical qualified individual working in the area. FAQC-SafetySoftwareQualityAssurance.docx Description Safety Software Quality Assurance Qualification Card More Documents & Publications

212

Microgrids: An emerging paradigm for meeting building electricity and heat requirements efficiently and with appropriate energy quality  

E-Print Network (OSTI)

power electronic flexible AC distribution system and storage, islanded operation of the µgrid and power quality control

Marnay, Chris; Firestone, Ryan

2007-01-01T23:59:59.000Z

213

Council on Environmental Quality | Open Energy Information  

Open Energy Info (EERE)

Environmental Quality Environmental Quality Jump to: navigation, search Logo: Council on Environmental Quality Name Council on Environmental Quality Address 722 Jackson Place Northwest Place Washington, DC Zip 20506 Year founded 1969 Phone number (202) 395-5750 Website http://www.whitehouse.gov/admi Coordinates 38.89943°, -77.0384009° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":38.89943,"lon":-77.0384009,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

214

Environmental Quality Improvement Act of 1970  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

QUALITY IMPROVEMENT ACT OF 1970* QUALITY IMPROVEMENT ACT OF 1970* SHORT TITLE This title may be cited as the "Environmental Quality Improvement Act of 1970" Sec. 4371. Congressional findings, declarations, and purposes (a) The Congress finds - (1) that man has caused changes in the environment; (2) that many of these changes may affect the relationship between man and his environment; and (3) that population increases and urban concentration contribute directly to pollution and the degradation of our environment. (b)(1)The Congress declares that there is a national policy for the environment which provides for the enhancement of environmental quality. This policy is evidenced by statutes heretofore enacted relating to the prevention, abatement, and control of environmental pollution, water and land resources, transportation, and economic and

215

NETL: IEP - Air Quality Research: Regulatory Drivers  

NLE Websites -- All DOE Office Websites (Extended Search)

Regulatory Drivers Regulatory Drivers DOE/NETL’s Air Quality Research Program is in direct response to the need to ensure that fossil-fuel-fired power systems continue to meet current and future environmental requirements. Specific environmental regulatory requirements driving this research are briefly summarized below: I. Clean Air Act (Including 1990 Amendments) Title I - Air Pollution Prevention and Control Part A - Air Quality and Emission Limitations Sect. 109 - National Ambient Air Quality Standards In July 1997 EPA promulgated new standards for particulate matter finer than 2.5 micrometers (PM2.5) and revised the ambient ozone standards. Sect. 111 - Standards of Performance for New Stationary Sources Part C - Prevention of Significant Deterioration of Air Quality

216

BILIWG Meeting: DOE Hydrogen Quality Working Group  

E-Print Network (OSTI)

natural gas and ethanol are similar Product gas composition from steam reforming Species Natural Gas: distributed (forecourt) production ­ reforming of natural gas (autothermal & steam reforming) ­ reforming Develop low-cost methods for gas sampling and analysis for certification and on-line quality control (and

217

Improving Regional Air Quality with Wind Energy  

DOE Green Energy (OSTI)

This model documentation is designed to assist State and local governments in pursuing wind energy purchases as a control measure under regional air quality plans. It is intended to support efforts to draft State Implementation Plans (SIPs), including wind energy purchases, to ensure compliance with the standard for ground-level ozone established under the Clean Air Act.

Not Available

2005-05-01T23:59:59.000Z

218

Quality assurance management plan (QAPP) special analytical support (SAS)  

Science Conference Proceedings (OSTI)

It is the policy of Special Analytical Support (SAS) that the analytical aspects of all environmental data generated and processed in the laboratory, subject to the Environmental Protection Agency (EPA), U.S. Department of Energy or other project specific requirements, be of known and acceptable quality. It is the intention of this QAPP to establish and assure that an effective quality controlled management system is maintained in order to meet the quality requirements of the intended use(s) of the data.

LOCKREM, L.L.

1999-05-20T23:59:59.000Z

219

Report: EM Quality Assurance  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EM QUALITY ASSURANCE EM QUALITY ASSURANCE September 25, 2008 Submitted by the EMAB Quality Assurance Subcommittee Background: In Fiscal Year (FY) 2008, the Environmental Management Advisory Board (EMAB) was tasked to dialogue with the Office of Quality Assurance (EM-60, QA) as it works to revitalize standards and institutionalize QA into Departmental and EM processes. In addition, EMAB was directed to dialogue with EM-60 on incorporating QA and engineering into the procurement process. Board members reviewed and discussed the topics of QA and EM-60's functions during their public meeting on May 7, 2008, in Washington D.C. The EMAB QA Subcommittee comprised of Dr. Lawrence Papay, Mr. G. Brian Estes, and Mr. Tom Winston, continued to explore the issues presented in May and engaged in follow-up

220

Hydrogen Fuel Quality (Presentation)  

DOE Green Energy (OSTI)

Jim Ohi of NREL's presentation on Hydrogen Fuel Quality at the 2007 DOE Hydrogen Program Annual Merit Review and Peer Evaluation on May 15-18, 2007 in Arlington, Virginia.

Ohi, J.

2007-05-17T23:59:59.000Z

Note: This page contains sample records for the topic "qc quality control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Quality Standards for Abstracts  

Science Conference Proceedings (OSTI)

QUALITY STANDARDS FOR ABSTRACTS American Oil Chemists’ Society (AOCS) An abstract allows you to concisely convey to the scientific community the value and importance of your research. Its restricted length allows the reader to quickly eva

222

DOE Federal Quality Council  

NLE Websites -- All DOE Office Websites (Extended Search)

DOE Federal Quality Council Note: Membership can be updated without re-approval of the Charter Name Org. Location Email Phone Colette Broussard HSS GTN colette.broussard@hq.doe.gov...

223

Power Quality Waveform Identification  

Science Conference Proceedings (OSTI)

This report describes the desired functionality, attributes and proposed development approach of a power quality (PQ) event identification tool that is planned to be developed under the Electric Power Research Institute (EPRI) Power Quality program P1.BackgroundPQ monitors capture a wide variety of disturbance events, ranging in frequency from direct current to a few megahertz. Advances in PQ monitoring and instrumentation allow continuous measurement and ...

2013-12-17T23:59:59.000Z

224

Office of Quality Assurance  

NLE Websites -- All DOE Office Websites (Extended Search)

Quality Assurance Quality Assurance QUALITY ASSURANCE IN THE DEPARTMENT OF ENERGY DOE has established Quality Policy, Principles and Value Added Requirement Attributes that apply to all work and are focused on performance, customer expectations, and improvement. When properly implemented, the principles and requirements form a management system to plan, perform, assess, and improve work. The requirements are performance oriented and offer unlimited implementation flexibility. The DOE quality management system moves beyond the traditional quality assurance requirements that had become narrowly focused on safety systems, paper, compliance, and inspections. The management system is designed to link with an organization's strategic plan to support mission achievement and the delivery of products and services. The Department's commitment to environment, safety, and health also relies, upon work being conducted within an effective management system. DOE line managers and contracting officers must understand these two fundamental purposes for the QA requirements and ensure the QA Order and rule are specified in each major contract (including those contracts using the Work Smart Standards process to satisfy DOE Acquisition regulation 48 CFR 970.5223-1).

225

Quality Assurance Program Plan for radionuclide airborne emissions monitoring  

SciTech Connect

This Quality Assurance Program Plan (QAPP) describes the quality assurance requirements and responsibilities for radioactive airborne emissions measurements activities from regulated stacks are controlled at the Hanford Site. Detailed monitoring requirements apply to stacks exceeding 1% of the standard of 10 mrem annual effective dose equivalent to the maximally exposed individual from operations of the Hanford Site.

Vance, L.M.

1993-07-01T23:59:59.000Z

226

Information Quality | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Quality Information Quality Peer Review Agenda Vehicle Technologies Annual Merit Review Effects of Intermediate Ethanol Blends on Legacy Vehicles and Small Non-Road Engines,...

227

Quality Assurance: Policy and Directives  

NLE Websites -- All DOE Office Websites (Extended Search)

Policy and Directives The Office of Quality Assurance is responsible for DOE's quality assurance (QA) policy and requirements, and for providing assistance with QA implementation....

228

Air Quality | Open Energy Information  

Open Energy Info (EERE)

Air Quality Jump to: navigation, search Retrieved from "http:en.openei.orgwindex.php?titleAirQuality&oldid612070" Category: NEPA Resources...

229

Survey Automatic control in microelectronics manufacturing: Practices, challenges, and possibilities  

Science Conference Proceedings (OSTI)

Advances in modeling and control will be required to meet future technical challenges in microelectronics manufacturing. The implementation of closed-loop control on key unit operations has been limited due to a dearth of suitable in situ measurements, ... Keywords: End point control, Factory automation, Microelectronics manufacturing, Predictive control, Process control, Quality control, Sensors, Temperature control

Thomas F. Edgar; Stephanie W. Butler; W.Jarrett Campbell; Carlos Pfeiffer; Christopher Bode; Sung Bo Hwang; K. S. Balakrishnan; J. Hahn

2000-11-01T23:59:59.000Z

230

SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Training Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM More Documents & Publications SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM SOFTWARE QUALITY & SYSTEMS...

231

Sampling and Analysis Plan for Catch Tank 241ER311 Vapor  

Science Conference Proceedings (OSTI)

This tank sampling and analysis plan (TSAF') identifies the sample collection, laboratory analysis, quality assurance/quality control (QA/QC) objectives for the characterization of catch tank 241-ER-311 vapor space. Data to be collected under this revision (Revision 2) of the TSAP will be used to evaluate the effectiveness of the portable exhauster recently installed for the tank. Vapor samples taken previous to the issuance of this revision shall be analyzed in accordance with Revision 1.

NGUYEN, D.M.

1999-11-15T23:59:59.000Z

232

NETL: Site Environmental Quality  

NLE Websites -- All DOE Office Websites (Extended Search)

Site Environmental Quality Site Environmental Quality About NETL Site Environmental Quality - Certified to ISO 14001:2004 Questions about NETL's Environment, Safety and Health Management System may be directed to Michael Monahan, 304-285-4408, michael.monahan@netl.doe.gov. NETL has implemented an Environment, Safety and Health (ES&H) Management System, based on DOE's Integrated Safety Management System, the International Organization for Standardization (ISO) 14000 series, and the Occupational Health and Safety Assessment (OHSAS) 18000 series. While the original scope of the ES&H Management System included the Morgantown and Pittsburgh sites, in fiscal year 2010, the Albany site was incorporated into the existing ES&H Management System. In addition, all three sites underwent ISO 14001:2004 recertification audits and Morgantown and

233

Indoor Environmental Quality  

NLE Websites -- All DOE Office Websites (Extended Search)

office interior, people talking, computational fluid dynamics image office interior, people talking, computational fluid dynamics image Indoor Environmental Quality EETD conducts a broad program of research, technology development, and dissemination activities directed toward improving the health, comfort, and energy efficiency of the indoor environment. EETD researchers conduct a broad program of research and development with the goals of: reducing the energy used for thermally conditioning and distributing ventilation air in buildings improving indoor air quality (IAQ), thermal comfort and the health and productivity of building occupants understanding human exposures to environmental pollutants found in indoor and outdoor air improving the scientific understanding of factors and processes affecting air quality developing sound science to inform public policy on the most

234

Quality Assurance REFERENCE GUIDE  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Quality Assurance Quality Assurance Qualification Standard DOE-STD-1150-2002 July 2012 Reference Guide The Functional Area Qualification Standard References Guides are developed to assist operators, maintenance personnel, and the technical staff in the acquisition of technical competence and qualification within the Technical Qualification Program. Please direct your questions or comments related to this document to the Office of Leadership and Career Management, Technical Qualification Program (TQP) Manager, Albuquerque Complex. This page is intentionally blank. Table of Contents i FIGURES ....................................................................................................................................... ii TABLES ........................................................................................................................................ iii

235

Marketing Quality Energy Awareness  

E-Print Network (OSTI)

Marketing and quality concepts were utilized in developing an employee awareness plan to facilitate long term employee participation that improved energy efficiency 15%. The plan was successfully introduced on a test basis in two manufacturing locations and now is a part of overall operations. The marketing concepts aided in determining who was the customer and what functional value an awareness plan has for employees (customers). Quality concepts, including performance management, augmented marketing strategies by determining customer requirements, measurements and feedback. The agreed upon critical components were formatted into an organized plan of education, assigned responsibility, feedback and incentives.

Fortier, L. J.

1988-09-01T23:59:59.000Z

236

NIST Intranet Quality System Links  

Science Conference Proceedings (OSTI)

Safety. Environmental Management System. NIST Quality System Resources. Assessor Resources. MSAG Website. Dates and Deadlines. ...

2012-08-21T23:59:59.000Z

237

Montana Environmental Quality Council | Open Energy Information  

Open Energy Info (EERE)

Quality Council Quality Council Jump to: navigation, search Name Montana Environmental Quality Council Address Legislative Environmental Policy Office PO Box 201704 Place Helena, Montana Zip 59620-1704 Phone number 406-444-3742 Website http://leg.mt.gov/css/Services Coordinates 46.53°, -112.16° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":46.53,"lon":-112.16,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

238

A quality management approach to civil engineering  

E-Print Network (OSTI)

A methodology is presented for basing quality improvement decisions in civil engineering design firms upon historical data, statistical methods, and hydrologic modeling techniques. Statistical Process Control (SPC) is a quality management tool that has been used, with great success, in the manufacturing industry for nearly 50 years. The hydrologic techniques used were created by the Soil Conservation Service to generate synthetic storm hydrography. Historical data from an East Texas civil engineering firm are the basis for the research used to determine, chart, and analyze the current system used in the service provided to one of the company's largest clients. The result is the application of a quantifiable method for improving the quality of this service.

Baber, Thomas James

1999-01-01T23:59:59.000Z

239

Chemical analysis quality assurance at the ICPP  

Science Conference Proceedings (OSTI)

This document discusses the chemical analysis quality assurance program at the ICPP which involves records management, analytical methods quality control, analysis procedures and training and qualification. Since 1979, the major portion of the quality assurance program has been implemented on a central analytical computer system. The individual features provided by the system are storage, retrieval, and search capabilities over all general request and sample analysis information, automatic method selection for all process streams, automation of all method calculations, automatic assignment of bias and precision estimates at all analysis levels, with-method-use requalification, untrained or unqualified analyst method lockout, statistical testing of all process stream results for replicate agreement, automatic testing of process results against pre- established operating, safety, or failure limits at varying confidence levels, and automatic transfer and report of all analysis data plus all statistical testing to the Production Department.

Hand, R.L.

1990-01-01T23:59:59.000Z

240

Control of Records  

NLE Websites -- All DOE Office Websites (Extended Search)

3 Control of Records Process 11_0304 Page 1 of 6 3 Control of Records Process 11_0304 Page 1 of 6 EOTA - Business Process Document Title: Control of Records Process Document Number P-003 Rev 11_0304 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: Q-001, Quality Manual Notify of Changes: EOTA Employees Referenced Document(s): REG-003, Records Register P-003 Control of Records Process 11_0304 Page 2 of 6 Revision History: Rev. Description of Change A Initial Release 08_0805 Added Integration Group to Section III. 11_0304 Defined Record Creator and New Record for clarity and swapped Step 3.0 and 4.0 P-003 Control of Records Process 11_0304 Page 3 of 6 I. Purpose To describe the process for how records are established and maintained to provide evidence of conformity to requirements and

Note: This page contains sample records for the topic "qc quality control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

DOE Mercury Control Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Mercury Control Research Mercury Control Research Air Quality III: Mercury, Trace Elements, and Particulate Matter September 9-12, 2002 Rita A. Bajura, Director National Energy Technology Laboratory www.netl.doe.gov 169330 RAB 09/09/02 2 Potential Mercury Regulations MACT Standards * Likely high levels of Hg reduction * Compliance: 2007 Clean Power Act of 2001 * 4-contaminant control * 90% Hg reduction by 2007 Clear Skies Act of 2002 * 3-contaminant control * 46% Hg reduction by 2010 * 70% Hg reduction by 2018 * Hg emission trading President Bush Announcing Clear Skies Initiative February 14, 2002 169330 RAB 09/09/02 3 Uncertainties Mercury Control Technologies * Balance-of-plant impacts * By-product use and disposal * Capture effectiveness with low-rank coals * Confidence of performance 169330 RAB 09/09/02 4

242

Residential Humidity Control Strategies  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Humidity Control Strategies Residential Humidity Control Strategies Armin Rudd Residential Energy Efficiency Stakeholder Meeting 2/29 - 3/2/2012 Austin, Texas 2 Residential Energy Efficiency Stakeholder Meeting 2/29 - 3/2/2012 Austin, Texas Humidity control goals  Comfort, and Indoor Air Quality  Control indoor humidity year-around, just like we do temperature  Durability and customer satisfaction  Reduce builder risk and warranty/service costs 2 3 Residential Energy Efficiency Stakeholder Meeting 2/29 - 3/2/2012 Austin, Texas Humidity control challenges 1. In humid cooling climates, there will always be times of the year when there is little sensible cooling load to create thermostat demand but humidity remains high * Cooling systems that modify fan speed and temperature set point based on humidity can help but are still limited

243

Equivalence in Ventilation and Indoor Air Quality  

SciTech Connect

We ventilate buildings to provide acceptable indoor air quality (IAQ). Ventilation standards (such as American Society of Heating, Refrigerating, and Air-Conditioning Enginners [ASHRAE] Standard 62) specify minimum ventilation rates without taking into account the impact of those rates on IAQ. Innovative ventilation management is often a desirable element of reducing energy consumption or improving IAQ or comfort. Variable ventilation is one innovative strategy. To use variable ventilation in a way that meets standards, it is necessary to have a method for determining equivalence in terms of either ventilation or indoor air quality. This study develops methods to calculate either equivalent ventilation or equivalent IAQ. We demonstrate that equivalent ventilation can be used as the basis for dynamic ventilation control, reducing peak load and infiltration of outdoor contaminants. We also show that equivalent IAQ could allow some contaminants to exceed current standards if other contaminants are more stringently controlled.

Sherman, Max; Walker, Iain; Logue, Jennifer

2011-08-01T23:59:59.000Z

244

Dream controller  

SciTech Connect

A method and apparatus for intelligently controlling continuous process variables. A Dream Controller comprises an Intelligent Engine mechanism and a number of Model-Free Adaptive (MFA) controllers, each of which is suitable to control a process with specific behaviors. The Intelligent Engine can automatically select the appropriate MFA controller and its parameters so that the Dream Controller can be easily used by people with limited control experience and those who do not have the time to commission, tune, and maintain automatic controllers.

Cheng, George Shu-Xing; Mulkey, Steven L; Wang, Qiang; Chow, Andrew J

2013-11-26T23:59:59.000Z

245

Hydrogen Fuel Quality  

DOE Green Energy (OSTI)

For the past 6 years, open discussions and/or meetings have been held and are still on-going with OEM, Hydrogen Suppliers, other test facilities from the North America Team and International collaborators regarding experimental results, fuel clean-up cost, modeling, and analytical techniques to help determine levels of constituents for the development of an international standard for hydrogen fuel quality (ISO TC197 WG-12). Significant progress has been made. The process for the fuel standard is entering final stages as a result of the technical accomplishments. The objectives are to: (1) Determine the allowable levels of hydrogen fuel contaminants in support of the development of science-based international standards for hydrogen fuel quality (ISO TC197 WG-12); and (2) Validate the ASTM test method for determining low levels of non-hydrogen constituents.

Rockward, Tommy [Los Alamos National Laboratory

2012-07-16T23:59:59.000Z

246

Judging Air Quality Model Performance  

Science Conference Proceedings (OSTI)

Under the direction of the AMS Steering Committee for the EPA Cooperative Agreement on air quality modeling, a small group of scientists was convened to review and recommend procedures to evaluate the performance of air quality models. Particular ...

Douglas G. Fox

1981-05-01T23:59:59.000Z

247

Total quality management implementation guidelines  

SciTech Connect

These Guidelines were designed by the Energy Quality Council to help managers and supervisors in the Department of Energy Complex bring Total Quality Management to their organizations. Because the Department is composed of a rich mixture of diverse organizations, each with its own distinctive culture and quality history, these Guidelines are intended to be adapted by users to meet the particular needs of their organizations. For example, for organizations that are well along on their quality journeys and may already have achieved quality results, these Guidelines will provide a consistent methodology and terminology reference to foster their alignment with the overall Energy quality initiative. For organizations that are just beginning their quality journeys, these Guidelines will serve as a startup manual on quality principles applied in the Energy context.

Not Available

1993-12-01T23:59:59.000Z

248

Uncertainty in Air Quality Modeling  

Science Conference Proceedings (OSTI)

Under the direction of the AMS Steering Committee for the EPA Cooperative Agreement on Air Quality Modeling, a small group of scientists convened to consider the question of uncertainty in air quality modeling. Because the group was particularly ...

Douglas G. Fox

1984-01-01T23:59:59.000Z

249

Micronutrients Measurement Quality Assurance Program  

Science Conference Proceedings (OSTI)

... Hôpital Purpan, Toulouse, France Life Sciences Group ... Measurement Quality Assurance Program: Helping ... to Improve their Long-term Measurement ...

2012-11-16T23:59:59.000Z

250

Estimate product quality with ANNs  

Science Conference Proceedings (OSTI)

Artificial neural networks (ANNs) have been applied to predict catalytic reformer octane number (ON) and gasoline splitter product qualities. Results show that ANNs are a valuable tool to derive fast and accurate product quality measurements, and offer a low-cost alternative to online analyzers or rigorous mathematical models. The paper describes product quality measurements, artificial neural networks, ANN structure, estimating gasoline octane numbers, and estimating naphtha splitter product qualities.

Brambilla, A. [Univ. of Pisa (Italy); Trivella, F. [Adicon Advanced Distillation Control SrL, Pisa (Italy)

1996-09-01T23:59:59.000Z

251

Waste Management Quality Assurance Plan  

E-Print Network (OSTI)

Department of Energy (DOE) Order 414.1C, Quality Assurance,DOE, federal, and state regulations and compliance orders.

Waste Management Group

2006-01-01T23:59:59.000Z

252

Waste Management Quality Assurance Plan  

E-Print Network (OSTI)

PROGRAM .4 Organizational Structure ..4 Management Quality Assurance Functions 5 Planning 5 2.0 PERSONNEL TRAINING AND

Waste Management Group

2006-01-01T23:59:59.000Z

253

Roadmap for Power Quality Mitigation Technology Demonstration Projects at Commercial Customer Sites  

Science Conference Proceedings (OSTI)

Power quality has emerged as an important issue for the commercial customer segment. Historically, power quality issues have been the domain of electric utilities, which focused on reducing or eliminating power outages. However, the recent proliferation in office use of electronic equipment and microprocessor-based controls has caused electric utilities to redefine power quality in terms of the quality of voltage supply rather than availability of power. This document provides a screening tool for utilit...

1999-12-09T23:59:59.000Z

254

Control of External Documents  

NLE Websites -- All DOE Office Websites (Extended Search)

2 Control of External Documents Process 11_0304 Page 1 of 5 2 Control of External Documents Process 11_0304 Page 1 of 5 EOTA - Business Process Document Title: Control of External Documents Process Document Number P-002 Rev 11_0304 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: Q-001, Quality Manual Notify of Changes: EOTA Employees Referenced Document(s): REG-002, External Document Register P-002 Control of External Documents Process 11_0304 Page 2 of 5 Revision History: Rev. Description of Change A Initial Release 11_0304 Changed revision format from alpha character to numbers; modified process to include a step directing addition to REG-002 External Document Register and changed verbiage to clarify and more accurately reflect current process.

255

Media Inventory Control  

NLE Websites -- All DOE Office Websites (Extended Search)

8 Media Inventory Control 11_0406 Page 1 of 5 8 Media Inventory Control 11_0406 Page 1 of 5 EOTA - Business Process Document Title: Media Inventory Control Document Number: ITTP-018 Rev. 09_0910 Document Owner: Janet Lee Backup Owner: Ben Aragon Approver(s): Melissa Otero Parent Document: Q-001, Quality Manual Notify of Changes: Referenced Document(s): MGTP-003 Customer Property, ISDP-002 Training Production Process, ADMP-001 Procurement Process, ADMP-003 Receiving/Inspection Process, ITTF-013 Media Requests ITTP-018 Media Inventory Control 11_0406 Page 2 of 5 Revision History: Rev. Description of Change A Initial Release B Added use of ITTF-013, Media Requests (SMS Records) 08_0904 Changed Media Specialist to Online Learning support Specialist (OLSS). Modified process to better fit actual media request process.

256

NETL: Mercury Emissions Control Technologies - Long-term Operation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Papers and Publications: Long-Term Evaluation of Activated Carbon Injection for Mercury Control Upstream of a COHPAC Fabric Filter PDF-298KB presented at Air Quality IV...

257

Louisiana Nuclear Energy and Radiation Control Law (Louisiana)  

Energy.gov (U.S. Department of Energy (DOE))

The Louisiana Department of Environmental Quality is responsible for the regulation of nuclear energy safety, permitting and radiation safety and control in Louisiana. The Department operates...

258

Steam in Distribution and Use: Steam Quality Redefined  

E-Print Network (OSTI)

Steam quality is an important measurement in steam generation. It's a measurement of steam to moisture ratio. In use, steam quality takes on a different meaning- steam which maximizes energy transfer. To do this, the steam must be clean, dry, of desired pressure and free of air and non-condensible gases. Objectives in these areas should be set and an action plan implemented. Typical objectives could be to specify steam pressure delivery of maximum pressure and to use steam at the lowest pressure possible. Steam velocity ranges and maximum system pressure drops should be set. Cleaning steam and protecting control devices is an important means of maintaining quality. Draining condensate and venting air and other gases preserves the steam quality at the point of use. Poor pressure control yields poor operation and efficiency. Dirty steam causes valve leaks and maintenance problems. Improper drainage and venting can cause premature corrosion and poor heat transfer.

Deacon, W. T.

1989-09-01T23:59:59.000Z

259

Steam in Distribution and Use: Steam Quality Redefined  

E-Print Network (OSTI)

"Steam quality is an important measurement in steam generation. It's a measurement of steam to moisture ratio. In use, steam quality takes on a different meaning - steam which maximizes energy transfer. To do this, the steam must be clean, dry, of desired pressure and free of air and non-condensable gases. Objectives in these areas should be set and an action plan implemented. Typical objectives could be to specify steam pressure delivery of maximum pressure and to use steam at the lowest pressure possible. Steam velocity ranges and maximum system pressure drops should be set. Cleaning steam and protecting control devices is an important means of maintaining quality. Draining condensate and venting air and other gases preserves the steam quality at the point of use. Poor pressure control yields poor operation and efficiency. Dirty steam causes valve leaks and maintenance problems. Improper drainage and venting can cause premature corrosion and poor heat transfer."

Deacon, W.

1989-09-01T23:59:59.000Z

260

Quality Assurance | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Assurance Assurance Quality Assurance QUALITY ASSURANCE IN THE DEPARTMENT OF ENERGY DOE has established Quality Policy, Principles and Value Added Requirement Attributes that apply to all work and are focused on performance, customer expectations, and improvement. When properly implemented, the principles and requirements form a management system to plan, perform, assess, and improve work. The requirements are performance oriented and offer unlimited implementation flexibility. The DOE quality management system moves beyond the traditional quality assurance requirements that had become narrowly focused on safety systems, paper, compliance, and inspections. The management system is designed to link with an organization's strategic plan to support mission achievement and the

Note: This page contains sample records for the topic "qc quality control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

CRAD, Quality Assurance - Idaho Accelerated Retrieval Project Phase II |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CRAD, Quality Assurance - Idaho Accelerated Retrieval Project Phase CRAD, Quality Assurance - Idaho Accelerated Retrieval Project Phase II CRAD, Quality Assurance - Idaho Accelerated Retrieval Project Phase II February 2006 A section of Appendix C to DOE G 226.1-2 "Federal Line Management Oversight of Department of Energy Nuclear Facilities." Consists of Criteria Review and Approach Documents (CRADs) used for a February 2006 Commencement of Operations assessment of the Quality Assurance Program at the Idaho National Laboratory, Idaho Accelerated Retrieval Project Phase II. CRADs provide a recommended approach and the types of information to gather to assess elements of a DOE contractor's programs. CRAD, Quality Assurance - Idaho Accelerated Retrieval Project Phase II More Documents & Publications CRAD, Radiological Controls - Idaho Accelerated Retrieval Project Phase II

262

AVESTAR® - Control  

NLE Websites -- All DOE Office Websites (Extended Search)

Control Control AVESTAR control system efforts are focused on development of computational approaches for simulation and advanced controls for energy systems. Power generation technologies are growing more sophisticated and require control strategies and systems to be updated to allow plant owners to take full advantage of their increased capabilities. A well designed control system can provide the ability to hit and maintain setpoints without oscillation for optimum power plant operation. Implementation of complex control systems developed through advanced computational approaches will increase efficiency and reduce emissions. The AVESTAR team is focusing on the following three areas of process control research: 1) Plant-wide control system design, 2) Advanced regulatory control, and 3) Advanced process control. Process control models, methods, and tools are developed and applied to a wide variety of energy systems ranging from smart plant to smart grid.

263

Perceptual quality assessment for compressed video  

E-Print Network (OSTI)

Overview of Video Quality Assessment . . . . . . . . . . . .2.3.1 Subjective Video Quality Assessment . . . . . . . .2.3.2 Objective Video Quality Assessment . . . . . . . . .

Yang, Kai-Chieh

2007-01-01T23:59:59.000Z

264

Quality Report SQAS95-001  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Quality Report SQAS95-001 Planning for a Software Process Assessment May 1995 Software Quality Assurance Subcommittee of the Nuclear Weapons Complex Quality Managers United States...

265

UMTRA technical assistance contractor Quality Assurance Program Plan. Revision 4  

SciTech Connect

This Quality Assurance Program Plan (QAPP) provides the primary requirements for the integration of quality functions into all Technical Assistance Contractor (TAC) Project organization activities. The QAPP is the written directive authorized by the TAC Program Manager to accomplish this task and to implement procedures that provide the controls and sound management practices needed to ensure TAC contractual obligations are met. The QA program is designed to use monitoring, audit, and surveillance functions as management tools to ensure that all Project organization functions are executed in a manner that will protect public health and safety, promote the success of the Project, and meet or exceed contract requirements. The key to ensuring compliance with this directive is a two-step professional approach: utilize the quality system in all areas of activity, and generate a personal commitment from all personnel to provide quality service. The quality staff will be experienced, trained professionals capable of providing maximum flexibility to Project goal attainment. Such flexibility will enable the staff to be more cost effective and to further improve communication and coordination. To provide control details, this QAPP will be supplemented by approved standard operating procedures that provide requirements for performing the various TAC quality-related activities. These procedures shall describe applicable design input and document control activities and documentation.

Pehrson, P.

1993-10-12T23:59:59.000Z

266

Environmental Restoration Quality Program Plan  

Science Conference Proceedings (OSTI)

The Martin Marietta Energy Systems, Inc., Environmental Restoration (ER) Program was initially chartered on October 1, 1989, as a entral Environmental Restoration Division'' to manage the investigation and remediation of inactive sites and facilities that have been declared surplus and have no further programmatic use. The Energy Systems ER Division was established to support the DOE Oak Ridge Field Office (DOE-OR) consolidated ER Program. The DOE-OR Assistant Manager for Environmental Restoration and Waste Management provides program and budget direction to the Energy Systems ER Program for environmental restoration activities at the sites operated by Energy Systems (Oak Ridge K-25 Site, Oak Ridge National Laboratory, Oak Ridge Y-12 Plant, Paducah Gaseous Diffusion Plant, Portsmouth Gaseous Diffusion Plant) and at the off-site locations. The Energy Systems ER Division is specifically charged with assessing these sites for potential contamination and managing the cleanup processes. The Energy Systems Environmental Restoration Division was chartered on October 1, 1989, as a central organization to manage the Remedial Action (RA) Program. The purpose of this document is to ensure that: senior ER management provides planning, organization, direction, control, and support to achieve the organization's objectives; the line organization achieves quality; and overall performance is reviewed and evaluated using a rigorous assessment process.

Colley, J.S.

1992-08-01T23:59:59.000Z

267

Air Pollution Control Rules (West Virginia)  

Energy.gov (U.S. Department of Energy (DOE))

The listed rules were enacted as directed by the Air Pollution Control Act. Together, these rules guide the monitoring, permitting and compliance enforcement of air quality in the state.

268

Oregon Environmental Quality Commission | Open Energy Information  

Open Energy Info (EERE)

Oregon Environmental Quality Commission Oregon Environmental Quality Commission Address 811 SW 6th Avenue Place Portland, Oregon Zip 97204-1390 Phone number 503-229-5301 Website http://www.oregon.gov/DEQ/EQC/ Coordinates 45.5182053°, -122.6790735° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.5182053,"lon":-122.6790735,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

269

Environmental Restoration Quality Program Implementation Plan  

SciTech Connect

The Environmental Restoration (ER) Program requirements for implementation of DOE Order 5700.6C are identified in the Environmental Restoration Quality Program Plan, (QPP). Management systems necessary to implement the ER QPP consist of the necessary standards and procedures required to be developed to adequately control ER processes. To the extent possible, Martin Marietta Energy Systems, Inc., standards and procedures will be utilized at the ER Program level, and requirements will not be repeated. The quality management systems identified for enhancement or development are identified in the section on Procedure Development Strategy and directly relate to unique ER Program activities. Procedures and standards that currently exist in the ER Program will be validated for compliance with ER QPP requirements.

1992-08-01T23:59:59.000Z

270

Dynamic Rightsizing with Quality-Controlled Algorithms in Virtualization Environments  

Science Conference Proceedings (OSTI)

Virtualization and partitioning are the means by which multiple application instances can share and run multiple virtual machines supported by a platform. In a Green Cloud environment, the goal is to consolidate multiple applications onto virtual machines ... Keywords: Cloud Computing, Energy-Saving, Green Cloud, Queuing, Theory Virtual Machine

Ming-Jeng Yang; Chin-Lin Kuo; Yao-Ming Yeh

2011-04-01T23:59:59.000Z

271

Scoping Document: Water Quality Control Policy on the  

E-Print Network (OSTI)

1 INTRODUCTION Background Annually, thermal electric power plants take in billions of gallons 8 One measure of the plant thermal efficiency used by the power industry is the Net Plant Heat Rate for Power Plant Cooling. March 2008 ii LIST OF PREPARERS The following staff of the State Water Resources

272

Observation Quality Control with a Robust Ensemble Kalman Filter  

Science Conference Proceedings (OSTI)

Current ensemble-based Kalman filter (EnKF) algorithms are not robust to gross observation errors caused by technical or human errors during the data collection process. In this paper, the authors consider two types of gross observational errors, ...

Soojin Roh; Marc G. Genton; Mikyoung Jun; Istvan Szunyogh; Ibrahim Hoteit

2013-12-01T23:59:59.000Z

273

Air Quality Control Act (New Mexico) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Mexico Program Type Environmental Regulations This act states the duties and powers of the New Mexico Environmental Improvement Board and local agencies. It also states...

274

Quality control of PCR primers used in multiplex STR ...  

Science Conference Proceedings (OSTI)

... Convicted offender samples may be processed months or even years prior to ... Morling, C. Phillips, H. Pfitzinger, S. Rand, M. Sabatier, R. Scheithauer ...

2001-06-26T23:59:59.000Z

275

6.1.1. How did Statistical Quality Control Begin?  

Science Conference Proceedings (OSTI)

... These guilds mandated long periods of training for apprentices, and those who were aiming to become master craftsmen had to demonstrate ...

2013-10-30T23:59:59.000Z

276

Quality Control of FSWs Using In-Situ Data Monitoring  

Science Conference Proceedings (OSTI)

... correlated with the resulting tensile properties along the length of the weld seam. ... and Microstructure of Tandem Submerged Arc Welded X80 Pipeline Steel.

277

Observation Quality Control with a Robust Ensemble Kalman Filter  

Science Conference Proceedings (OSTI)

Current ensemble-based Kalman filter (EnKF) algorithms are not robust to gross observation errors caused by technical or human errors during the data collection process. In this paper, we consider two types of gross observational errors, additive ...

Soojin Roh; Marc G. Genton; Mikyoung Jun; Istvan Szunyogh; Ibrahim Hoteit

278

Spot Ventilation: Source Control to Improve Indoor Air Quality  

SciTech Connect

Fact sheet for homeowners and contractors on how to employ spot ventilation in the home for comfort and safety.

2002-12-01T23:59:59.000Z

279

Whole-House Ventilation Systems: Improved Control of Air Quality  

SciTech Connect

Fact sheet for homeowners and contractors on how to employ spot ventilation in the home for comfort and safety.

2002-12-01T23:59:59.000Z

280

Porter-Cologne Water Quality Control Act | Open Energy Information  

Open Energy Info (EERE)

Low Emission Development Strategies Oil & Gas Smart Grid Solar U.S. OpenLabs Utilities Water Wind Page Actions View form View source History View New Pages Recent Changes All...

Note: This page contains sample records for the topic "qc quality control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Rain Detection and Quality Control of SeaWinds  

Science Conference Proceedings (OSTI)

A good assessment of the information content of scatterometer winds is particularly important in order to assimilate them in weather analysis. Besides retrieval problems in cases of a confused sea state, a particularly acute problem of Ku-band ...

M. Portabella; A. Stoffelen

2001-07-01T23:59:59.000Z

282

Organic analyses in water quality control programs - training manual  

Science Conference Proceedings (OSTI)

A lecture/laboratory manual dealing with the analysis of selected organic pollutants. Intended for use by those having little or no experience in the field, but having one year (or equivalent) of college organic chemistry, and having basic laboratory skills (volumetric glassware, titration assemblies, analytical and trip balances). Topics include dissolved oxygen, biochemical oxygen demand, ammonia, nitrates, nitrites, carbon analysis, chemical oxygen demand, surfactants, oil and grease phenolics, gas chromatography, and polychlorinated biphenyls.

Feldmann, C.

1980-11-01T23:59:59.000Z

283

Quality Control of Pre-1948 Cooperative Observer Network Data  

Science Conference Proceedings (OSTI)

A recent comprehensive effort to digitize U.S. daily temperature and precipitation data observed prior to 1948 has resulted in a major enhancement in the computer database of the records of the National Weather Service’s cooperative observer ...

Kenneth E. Kunkel; David R. Easterling; Kenneth Hubbard; Kelly Redmond; Karen Andsager; Michael C. Kruk; Michael L. Spinar

2005-11-01T23:59:59.000Z

284

Quality Control and Interpolations of WOCE-TOGA Drifter Data  

Science Conference Proceedings (OSTI)

Satellite-tracked drifting buoy data are being collected by numerous investigators and agencies in several countries for the World Ocean Circulation Experiment-Tropical Oceans Global Atmosphere (WOCE-TOGA) Surface Velocity Program. By the end of ...

Donald V. Hansen; Pierre-Marie Poulain

1996-08-01T23:59:59.000Z

285

ASI … QMS Quality  

NLE Websites -- All DOE Office Websites (Extended Search)

Q-003 EOTA Processes: Sequence and Interaction - Continual Improvement 11_0406 Page 1 of 3 Q-003 EOTA Processes: Sequence and Interaction - Continual Improvement 11_0406 Page 1 of 3 EOTA - System Level Document Title: EOTA Processes: Sequence and Interaction - Continual Improvement Document Number: Q-003 Rev 11_0406 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approvers: Melissa Otero Parent Document: Q-001 Quality Manual Notify of Changes: EOTA Employees Referenced Documents: N/A Q-003 EOTA Processes: Sequence and Interaction - Continual Improvement 11_0406 Page 2 of 3 Revision History: Rev. Level Description of Change A Initial Release 07_1214 Updated to include new process 08_0805 Updated to include new process 09_0915 Updated to reflect processes more clearly. 10_0827 Updated to reflect process changes.

286

Concentrator-quality evaluation  

DOE Green Energy (OSTI)

The performance of a reflecting solar concentrator depends, of course, on its surface reflectance, but there are other important factors. Among these are sun-tracking errors, surface-slope errors, and surface irregularities. It is appropriate to use statistics to describe and analyze these non-deterministic factors. A scheme for specifying the quality of a solar concentrator that includes all these effects is described and illustrated. It is believed that this procedure is optimum in the sense that it requires a minimum of measurements to obtain a complete enough description of a concentrator to determine its optical performance under any operating geometry. The specification scheme is, therefore, suitable for use in general systems analysis studies involving solar concentrators.

Biggs, F.; Vittitoe, C.N.

1978-01-01T23:59:59.000Z

287

Lighting Group: Controls: Wireless Controls  

NLE Websites -- All DOE Office Websites (Extended Search)

Wireless Controls Wireless Lighting Control System (with DUST Networks) Objective The project objectives are to: 1. Demonstrate that wireless technology can be cost-effectively...

288

SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Project Tracking...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Project Tracking Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Project Tracking Checklist The following checklist is...

289

Water Quality (Louisiana) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Quality (Louisiana) Water Quality (Louisiana) Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General PublicConsumer Industrial Installer...

290

Quality Assurance: Library and Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Quality Assurance Library/Training Quality Assurance Library/Training DOE Quality Assurance Criteria Review and Approach Document (CRAD) Management Assessment Tools Software Quality Assurance CRAD QA Program Document Examples: These QA Programs are available to serve as examples from three different types of DOE organizations. Management System for Quality and Safety Management EM HQ DOE-ID DOE Nuclear Safety QA Regulation Enforcement Guide: DOE Enforcement Program Roles and Responsibilities Training, Qualification, and Orientation Materials: See also SQA Training U.S. Nuclear QA Principles, Practices and Requirements - Part I (August 2005) U.S. Nuclear QA Principles, Practices and Requirements - Part II-A Tutorial (August 2005) Suspect/Counterfeit Items Training Materials DOE-STD-1150-2002, Quality Assurance Functional Area Qualification Standard

291

Quality Policy | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Quality Policy Quality Policy Quality Policy It is the policy of the Department of Energy to establish quality requirements to ensure that risks and environmental impacts are minimized and that safety, reliability, and performance are maximized through the application of effective management systems commensurate with the risks posed by the facility or activity and its work. The Department implements this policy through the QA Order and the QA rule directives to ensure quality assurance requirements are clearly specified for the broad spectrum of work performed by DOE and its contractors. Objective The objective of the QA requirements are to establish an effective management system (i.e., quality assurance programs) using the performance requirements coupled technical standards where appropriate that ensure:

292

Transmission Power Quality Benchmarking Method  

Science Conference Proceedings (OSTI)

In 1990, EPRI initiated a power quality monitoring project at the distribution level known as the EPRI DPQ Project. During this project, twenty-four utilities monitored power quality levels on their distribution circuits. Nearly 300 sites were monitored for a period of approximately two years. The data gathered were characterized and analyzed to form a baseline of power quality on U.S. distribution circuits.

2000-12-05T23:59:59.000Z

293

International Quality Assurance Standards (Presentation)  

DOE Green Energy (OSTI)

Tests to make quantitative predictions about photovoltaic (PV) modules are needed. This presentation proposes the creation of international quality assurance standards for PV modules.

Kurtz, S.; Hacke, P.; Wohlgemuth, J.; Kempe, M.; Yamamichi, M.

2011-02-01T23:59:59.000Z

294

Survey Quality Assessments at EIA  

U.S. Energy Information Administration (EIA)

Phone: 202-287-1715 email: tbroene@eia.doe.gov Contents: ... Our new strategic plan places an emphasis on data quality, and includes a measure for

295

Reformulated gasoline quality issues  

Science Conference Proceedings (OSTI)

One year ago, a panel of industry experts were interviewed in the November/December 1994 issue of Fuel Reformulation (Vol. 4, No. 6). With the focus then and now on refinery investments, the panelists were asked to forecast which refining processes would grow in importance. It is apparent from their response, and from other articles and discussions throughout the year, that hydroprocessing and catalytic conversion processes are synergistic in the overall refinery design, with flexibility and process objectives varying on a unit-by-unit case. To an extent, future refinery investments in downstream petrochemicals, such as for paraxylene production, are based on available catalytic reforming feedstock. Just a importantly, hydroprocessing units (hydrotreating, hydrocracking) needed for clean fuel production (gasoline, diesel, aviation fuel), are heavily dependent on hydrogen production from the catalytic reformer. Catalytic reforming`s significant influence in the refinery hydrogen balance, as well as its status as a significant naphtha conversion route to higher-quality fuels, make this unit a high-priority issue for engineers and planners striving for flexibility.

Gonzalez, R.G.; Felch, D.E.; Edgar, M.D.

1995-11-01T23:59:59.000Z

296

ATPC: adaptive transmission power control for wireless sensor networks  

Science Conference Proceedings (OSTI)

Extensive empirical studies presented in this paper confirm that the quality of radio communication between low power sensor devices varies significantly with time and environment. This phenomenon indicates that the previous topology control solutions, ... Keywords: adaptive, feedback, link quality, transmission power control, wireless sensor network

Shan Lin; Jingbin Zhang; Gang Zhou; Lin Gu; John A. Stankovic; Tian He

2006-10-01T23:59:59.000Z

297

Economics of quality of experience  

Science Conference Proceedings (OSTI)

While the recent strong increase of interest in Quality of Experience both in industry and academia has managed to place the end user again into the center of service quality evaluation, corresponding economic implications have not received similar attention ... Keywords: WQL hypothesis, Weber-Fechner law, charging for QoE, telecommunication ecosystem, utility function

Peter Reichl; Bruno Tuffin; Patrick Maillé

2012-01-01T23:59:59.000Z

298

A quality model for mashups  

Science Conference Proceedings (OSTI)

Despite several years of mashup practice and research, it is still hard to find high-quality, useful mashups on the Web. While this can be partly ascribed to the low quality of the components used in the mashups or simply to the lack of suitable components, ...

Cinzia Cappiello; Florian Daniel; Agnes Koschmider; Maristella Matera; Matteo Picozzi

2011-06-01T23:59:59.000Z

299

Data Quality Policy 1. Statement  

E-Print Network (OSTI)

1 Data Quality Policy 1. Statement 1.1 Kingston University is committed to maintaining high standards in its management of data, working in accordance with best practice to provide appropriate assurance regarding data quality. The University recognises its statutory responsibilities in relation

Jones, Graeme A.

300

Quality Issues in Combustion LES  

Science Conference Proceedings (OSTI)

Combustion LES requires modelling of physics beyond the flow-field only. These additional models lead to further quality issues and an even stronger need to quantify simulation and modelling errors. We illustrate stability problems, the need for consistent ... Keywords: Combustion, Error landscape, LES, Large-Eddy simulation, Quality, Turbulence

A. M. Kempf; B. J. Geurts; T. Ma; M. W. Pettit; O. T. Stein

2011-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "qc quality control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Indoor air quality environmental information handbook: radon  

SciTech Connect

The Department of Energy has a long-standing interest in investigating the impact of energy conservation measures on indoor air quality. The Office of Environmental Analysis has prepared this handbook in an effort to bring together available information on the impact of radon and its decay products on residential indoor air quality and on human health. The handbook is designed to enhance the understanding of the current state-of-knowledge regarding indoor radon for both homeowners and technical persons with an interest in indoor air quality issues. It provides the technical reader with a comprehensive review and reference source on the sources of radon and its transport mechanisms; reported indoor concentrations; building, and meteorological effects on radon concentration; models for predicting indoor concentrations; health effects and standards; and control technologies. The major questions and concerns of homeowners regarding the issue of indoor radon are addressed in a separate section entitled Radon in the Home: A Primer for Homeowners. This section also provides a starting point for readers desiring a general overview of the subject.

1986-01-01T23:59:59.000Z

302

Quality Assurance Exchange August 2012  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

With the help of dedicated quality With the help of dedicated quality professionals across the complex and beyond, I am pleased to announce that this issue of the Quality Assurance Exchange (QAE) newsletter focuses on hard hitting issues, as well as opportunities to explore abatement methods in regards to our quality assurance (QA) challenges. Within, you will find a brief discussion on the Department of Energy (DOE) Federal Quality Council and its Calendar Year 2011 accomplishments; an exploration of Safety Software QA activities including an overview of the annual meeting; an update on the Safety Software Communication Forum; and activities surrounding new and upcoming guides and systems. Also, you will get an inside look on the Differing Professional Opinions Process; read an exclusive interview

303

Oregon Department of Environmental Quality | Open Energy Information  

Open Energy Info (EERE)

Environmental Quality Environmental Quality Jump to: navigation, search Logo: Oregon Department of Environmental Quality Name Oregon Department of Environmental Quality Address 811 SW 6th Avenue Place Portland, Oregon Zip 97204-1390 Year founded 1969 Phone number 800-452-4011 Website http://www.oregon.gov/DEQ/Page Coordinates 45.5182053°, -122.6790735° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.5182053,"lon":-122.6790735,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

304

Utah Division of Water Quality | Open Energy Information  

Open Energy Info (EERE)

Water Quality Water Quality Jump to: navigation, search Logo: Utah Division of Water Quality Name Utah Division of Water Quality Address 195 North 1950 West Place Salt Lake City, Utah Phone number 801.536.4400 Website http://www.waterquality.utah.g Coordinates 40.7733661°, -111.9472798° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":40.7733661,"lon":-111.9472798,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

305

Institutional Controls  

NLE Websites -- All DOE Office Websites (Extended Search)

Institutional Controls Institutional Controls Many major Federal laws (e.g., Atomic Energy Act (AEA), Resource Conservation Recovery Act (RCRA), Comprehensive Environmental Response, Compensation and Liability Act (CERCLA)), Executive Orders, regulations and various other drivers influence the use of institutional controls at DOE sites. Some drivers directly authorize or require the use of institutional controls, while others do not. DOE also uses institutional controls when no specific statutory requirement exists to supplement active remediation, pollution control, public and resource protection, and physical security, or to bolster the integrity of engineered remedies. DOE and its predecessor agencies have conducted activities for over 50 years, using land ownership and access control, environmental monitoring and surveillance, and other tools to support protection efforts at operational and inactive facilities, including radioactive waste burial grounds.

306

OUT Success Stories: Battery Electricity Storage for Quality Power  

DOE Green Energy (OSTI)

A 3.5-megawatt valve-regulated lead-acid (VRLA) battery system installed at a lead recycling plant in California provides one hour of energy storage for both peak-shaving and uninterruptible power. It incorporates improvements in battery materials, manufacturing processes, and quality control.

Recca, L.

2000-08-31T23:59:59.000Z

307

Aquatic plant control research  

DOE Green Energy (OSTI)

The Northwest region of the United States contains extensive canal systems that transport water for hydropower generation. Nuisance plants, including algae, that grow in these systems reduce their hydraulic capacity through water displacement and increased surface friction. Most control methods are applied in an ad hoc fashion. The goal of this work is to develop cost-effective, environmentally sound, long-term management strategies to prevent and control nuisance algal growth. This paper reports on a multi-year study, performed in collaboration with the Pacific Gas & Electric Company, to investigate algal growth in their canal systems, and to evaluate various control methodologies. Three types of controls, including mechanical, biological and chemical treatment, were selected for testing and evaluation. As part of this study, water quality data were collected and algal communities were sampled from numerous stations throughout the distribution system at regular intervals. This study resulted in a more comprehensive understanding of conditions leading to the development of nuisance algal growth, a better informed selection of treatment plans, and improved evaluation of the effectiveness for the control strategies selected for testing.

Pryfogle, P.A.; Rinehart, B.N. [Idaho National Engineering Lab., Idaho Falls, ID (United States); Ghio, E.G. [Pacific Gas & Electric Company, San Francisco, CA (United States). Hydro Generation Engineering

1997-05-01T23:59:59.000Z

308

Quality Assurance: Fundamentals of the DOE Quality System  

NLE Websites -- All DOE Office Websites (Extended Search)

Fundamentals of the DOE Quality System Fundamentals of the DOE Quality System The quality assurance program is a management system involving all organizational components and should not be regarded as the sole domain of any single group. The Order and Rule reflects the concept that all work is a process that can be planned, performed, assessed, and improved. The basic requirements are broken into three categories: MANAGEMENT PERFORMANCE ASSESSMENT This format permits managers, those performing the work, and those assessing the planning implementation, and results of the work to focus on their unique responsibilities in carrying out the provisions of the quality assurance program. The three categories capture the range of activities common to all work, from organizing and staffing to assessing results and

309

Designs of control charts with supplementary runs rules  

Science Conference Proceedings (OSTI)

This article studies the designs of the control charts with the supplementary runs rules (zone rules). It also investigates, compares and ranks 15 resultant control charts based on steady-state Average Run Length (ARL) that is evaluated by computer simulation. ... Keywords: Computer simulation, Control charts, Optimization design, Quality control, Runs rules

Sheng Zhang; Zhang Wu

2005-08-01T23:59:59.000Z

310

GRR/Section 14-CA-d - Section 401 Water Quality Certification | Open Energy  

Open Energy Info (EERE)

GRR/Section 14-CA-d - Section 401 Water Quality Certification GRR/Section 14-CA-d - Section 401 Water Quality Certification < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 14-CA-d - Section 401 Water Quality Certification 14CADSection401WaterQualityCertification (1).pdf Click to View Fullscreen Contact Agencies California State Water Resources Control Board Regulations & Policies Section 401 Clean Water Act (33 U.S.C. 1251 et seq.) Porter-Cologne Water Quality Control Act Code of Regulations Title 23, Section 3855 et. seq. Triggers None specified Click "Edit With Form" above to add content 14CADSection401WaterQualityCertification (1).pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range.

311

Alternative Fuels Data Center: Biofuels Quality Specifications  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Biofuels Quality Biofuels Quality Specifications to someone by E-mail Share Alternative Fuels Data Center: Biofuels Quality Specifications on Facebook Tweet about Alternative Fuels Data Center: Biofuels Quality Specifications on Twitter Bookmark Alternative Fuels Data Center: Biofuels Quality Specifications on Google Bookmark Alternative Fuels Data Center: Biofuels Quality Specifications on Delicious Rank Alternative Fuels Data Center: Biofuels Quality Specifications on Digg Find More places to share Alternative Fuels Data Center: Biofuels Quality Specifications on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Biofuels Quality Specifications The Tennessee Department of Agriculture may inspect and test biofuels under

312

Wind Power Quality Test for Comparison of Power Quality Standards  

SciTech Connect

Power quality testing is important to wind power applications for several reasons. The nature of wind turbine generation is different from conventional power plants. Although windfarms are growing in capacity and diversifying in nature in the U.S. and throughout the globe, there is no standard that addresses the power quality of wind turbines or wind farms. The International Electrotechnical Committee (IEC) has convened Working Group 10 (WG10) to address testing and assessment of power quality characteristics of wind turbines. A IEEE task force has been appointed to reconsider flicker measurement procedures in the U.S. Lastly, power quality tests are now required as part of the certification process for wind turbines. NREL began this work both in response to industry request and in support of the IEC working group. (Mr. Gregory is a member of the IEC working group) This paper presents the NREL Certification Testing Team's effort in developing procedures and equipment for power quality testing for wind turbine certification. Summaries of several power quality standards that are applicable to this process are also presented in this paper.

Jacobson, R.; Gregory, B. (National Wind Technology Center)

1999-09-09T23:59:59.000Z

313

Wind Power Quality Test for Comparison of Power Quality Standards  

DOE Green Energy (OSTI)

Power quality testing is important to wind power applications for several reasons. The nature of wind turbine generation is different from conventional power plants. Although windfarms are growing in capacity and diversifying in nature in the U.S. and throughout the globe, there is no standard that addresses the power quality of wind turbines or wind farms. The International Electrotechnical Committee (IEC) has convened Working Group 10 (WG10) to address testing and assessment of power quality characteristics of wind turbines. A IEEE task force has been appointed to reconsider flicker measurement procedures in the U.S. Lastly, power quality tests are now required as part of the certification process for wind turbines. NREL began this work both in response to industry request and in support of the IEC working group. (Mr. Gregory is a member of the IEC working group) This paper presents the NREL Certification Testing Team's effort in developing procedures and equipment for power quality testing for wind turbine certification. Summaries of several power quality standards that are applicable to this process are also presented in this paper.

Jacobson, R.; Gregory, B. (National Wind Technology Center)

1999-09-09T23:59:59.000Z

314

Randomized Model Predictive Control for HVAC Systems  

Science Conference Proceedings (OSTI)

Heating, Ventilation and Air Conditioning (HVAC) systems play a fundamental role in maintaining acceptable thermal comfort and Indoor Air Quality (IAQ) levels, essentials for occupants well-being. Since performing this task implies high energy requirements, ... Keywords: Copulas, Learning, Randomized Model Predictive Control, Smart Buildings, Sustainable Control Systems

Alessandra Parisio, Damiano Varagnolo, Daniel Risberg, Giorgio Pattarello, Marco Molinari, Karl H. Johansson

2013-11-01T23:59:59.000Z

315

Load Control  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Visualization and Controls Peer Review Visualization and Controls Peer Review Load Control for System Reliability and Measurement-Based Stability Assessment Dan Trudnowski, PhD, PE Montana Tech Butte, MT 59701 dtrudnowski@mtech.edu 406-496-4681 October 2006 2 Presentation Outline * Introduction - Goals, Enabling technologies, Overview * Load Control - Activities, Status * Stability Assessment - Activities, Status * Wrap up - Related activities, Staff 3 Goals * Research and develop technologies to improve T&D reliability * Technologies - Real-time load control methodologies - Measurement-based stability-assessment 4 Enabling Technologies * Load control enabled by GridWise technology (e.g. PNNL's GridFriendly appliance) * Real-time stability assessment enabled by Phasor Measurement (PMU) technology 5 Project Overview * Time line: April 18, 2006 thru April 17, 2008

316

Air Pollution Control (Oklahoma) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Air Pollution Control (Oklahoma) Air Pollution Control (Oklahoma) Air Pollution Control (Oklahoma) < Back Eligibility Agricultural Fuel Distributor Industrial Investor-Owned Utility Local Government Municipal/Public Utility Rural Electric Cooperative State/Provincial Govt Systems Integrator Tribal Government Utility Savings Category Buying & Making Electricity Program Info State Oklahoma Program Type Environmental Regulations Provider Environmental Quality This chapter enumerates primary and secondary ambient air quality standards and the significant deterioration increments. Significant deterioration refers to an increase in ambient air pollution above a baseline plus a specific increment allowed for one of three classes of areas. It is required for potential sources of air contaminants to register with the

317

Smoke Control  

Science Conference Proceedings (OSTI)

... This was followed by the idea of the “pressure sand- wich,” ie, venting or exhausting the fire floor ... Smoke control is less dependent on tight barriers. ...

1996-08-14T23:59:59.000Z

318

ACCESS CONTROL  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TERMSDEFINITIONS FROM DOE M 470.4-7 ACCESS CONTROL. The process of permitting access or denying access to information, facilities, nuclear materials, resources, or designated...

319

Quality Assurance Exchange August 2011  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

The Department of Energy's (DOE's) Office The Department of Energy's (DOE's) Office of Health, Safety and Security (HSS) reorganized in May 2011, and within HSS, the Office of Quality Assurance Policy and Assistance (HS-23) is now the Office of Quality Assurance (HS-33) (see http://www.hss.doe.gov/orgchart.html). The Office of Quality Assurance reports to the newly formed Office of Nuclear Safety (HS-30) whose Director reports to the Chief Health, Safety and Security Officer, Mr. Glenn Podonsky. While the name of my office has changed slightly, our mission and functions remain the same. The entire staff of HS-33 is excited about this change and looks forward to the new interfaces, endeavors, and challenges in the coming years. Other exciting news is that DOE Order (O) 414.1D, Quality Assurance, was approved and issued

320

Aircraft Cabin Environmental Quality Sensors  

NLE Websites -- All DOE Office Websites (Extended Search)

Aircraft Cabin Environmental Quality Sensors Aircraft Cabin Environmental Quality Sensors Title Aircraft Cabin Environmental Quality Sensors Publication Type Report Year of Publication 2004 Authors Gundel, Lara A., Thomas W. Kirchstetter, Michael Spears, and Douglas P. Sullivan Keywords carbon monoxide, ozone Abstract Identification of aircraft cabin environmental quality concerns for which sensors may be useful The highest priority environmental indicators identified are ozone and cabin air pressure, followed by carbon monoxide and carbon dioxide with moderate priority, and then relative humidity, airborne particles, and organic contaminants, including engine oil byproducts and pesticides. This list is based on the Congressional requirements and recent scientific literature, starting with information from recent studies (NAS/NRC, ASHRAE/Battelle), and continuing by seeking input from a variety of stakeholders.

Note: This page contains sample records for the topic "qc quality control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Nuclear Safety: Software Quality Assurance  

NLE Websites -- All DOE Office Websites (Extended Search)

Nuclear Safety: Software Quality Assurance Nuclear Safety: Software Quality Assurance cd Welcome to the Department of Energy's Office of Health, Safety and Security (HSS) Software Quality Assurance (SQA) homepage. The purpose of this Web site is to promote continuous improvement and the sharing of knowledge of safety software quality assurance among interested parties across the DOE complex. It consolidates information and contains links to subject matter experts, procedures, training material, program descriptions, good practices, lessons learned and the Central Registry Toolbox Codes. The Portal also provides capabilities for member collaboration in product development and threaded discussions. Central Registry: The Central Registry provides a library of DOE "Toolbox" Codes covering site boundary accident dose consequences, fire accident source terms, leakpath factors, chemical release/dispersion and consequence, and radiological dispersion and consequence.

322

Quality Assurance Exchange August 2012  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

In a recent interview with Mr. Feit, he discussed the TSP in regards to the HSS Directives Reform Initiative and the new Project Justification Process, as well as how quality...

323

A systems view of quality  

E-Print Network (OSTI)

Caterpillar, a leading manufacturer of construction and mining equipment, diesel and natural gas engines and industrial gas turbines, is committed to continually improving the quality of their products. Caterpillar currently ...

Utley, Tana L. (Tana Leigh)

2007-01-01T23:59:59.000Z

324

Aircraft Cabin Environmental Quality Sensors  

E-Print Network (OSTI)

from recent studies (NAS/ NRC, ASHRAE/Battelle), andAtmospheric Administration NRC O 2 O 3 P PAS PdO 2 PM PO 2environmental quality concerns NRC’s monitoring priorities

Gundel, Lara

2010-01-01T23:59:59.000Z

325

Council on Environmental Quality (CEQ)  

Energy.gov (U.S. Department of Energy (DOE))

Congress established the Council on Environmental Quality within the Executive Office of the President as part of the National Environmental Policy Act of 1969 (NEPA). In enacting NEPA, Congress...

326

Quality Assurance Requirements and Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

QjCivilianRadioactive QjCivilianRadioactive Was'fe Management QA: QA QVALITY ASSURANCE REQUIREMENTS AND DESCRIPTION DOEIRW-0333P Revisiol1 20 Effective Date: 10-01-2008 LarrY Newman, DlrectQr Office of Quality As,surance ~~--~-_._._- Edward F. Spr at III, Di or Office of Civilian Radioactive Waste Management Date I/Jf/4t' , . - - - Date OCRWM Title: Quality Assurance Requirements and Description DOEIRW-0333P, Revision 20 Office of Civilian Radioactive Waste Management Quality Assurance Policy Page: 2 of 160 Successful implementation of the Office of Civilian Radioactive Waste Management (OCRWM) Quality Assurance (QA) program is essential for the OCRWM to carry out its mission. Our mission is to manage and dispose ofbigh-Ievel radioactive waste and spent nuclear fuel in a manner that protects health, safety, and the environment; enhances national and energy security; and merits

327

GRR/Section 14-CO-d - Section 401 Water Quality Certification | Open Energy  

Open Energy Info (EERE)

4-CO-d - Section 401 Water Quality Certification 4-CO-d - Section 401 Water Quality Certification < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 14-CO-d - Section 401 Water Quality Certification 14CODSection401WaterQualityCertification.pdf Click to View Fullscreen Contact Agencies Colorado Department of Public Health and Environment Regulations & Policies 5 CCR 1002-82 Colorado Water Quality Control Act Triggers None specified Click "Edit With Form" above to add content 14CODSection401WaterQualityCertification.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative Section 401 of the Clean Water Act (CWA) requires a Water Quality

328

GRR/Section 15-AK-b - Air Quality Minor Permit | Open Energy Information  

Open Energy Info (EERE)

GRR/Section 15-AK-b - Air Quality Minor Permit GRR/Section 15-AK-b - Air Quality Minor Permit < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 15-AK-b - Air Quality Minor Permit 15AKBAirQualityMinorPermit.pdf Click to View Fullscreen Contact Agencies Alaska Department of Environmental Conservation Regulations & Policies Alaska Statutes Alaska Administrative Code 18 AAC 50 Air Quality Control Regulations 40 CFR Chapter I, Subchapter C - Air Programs Triggers None specified Click "Edit With Form" above to add content 15AKBAirQualityMinorPermit.pdf 15AKBAirQualityMinorPermit.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative The mission of the Air Permit Program is to protect the Alaskan environment

329

A review of EIA report quality in the North West province of South Africa  

Science Conference Proceedings (OSTI)

The revised EIA regulations implemented on 3 July 2006 focused attention on the question of EIA effectiveness in South Africa. EIR quality review is one of the quality control functions contributing to EIA effectiveness within any EIA system, therefore the EIR quality review package developed by Lee and Colley was adapted and used to review the quality of a sample of 28 EIRs in the North West province of South Africa. Overall, 86% of the reports achieved satisfactory grades, with the descriptive and presentational elements of the EIRs more satisfactorily addressed, and the analytical components such as impact significance, addressed to a less satisfactory degree. EIR quality appears to be on par with international standards, but there are areas of distinct weakness. Further research is required to optimise quality review, and to reveal whether the new regulations have succeeded in addressing these weaknesses and made positive contributions to EIR quality, as a component of EIA effectiveness in South Africa.

Sandham, Luke A. [Environmental Assessment Research Group, School of Environmental Sciences and Development, North-West University, Private Bag X6001, Potchefstroom (South Africa)], E-mail: luke.sandham@nwu.ac.za; Pretorius, Hester M. [P.O. Box 6859, Ansfrere, 1711 (South Africa)], E-mail: hpret@webmail.co.za

2008-05-15T23:59:59.000Z

330

Order Module--DOE O 414.1D, QUALITY ASSURANCE | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

14.1D, QUALITY ASSURANCE 14.1D, QUALITY ASSURANCE Order Module--DOE O 414.1D, QUALITY ASSURANCE "To ensure that DOE, including NNSA, products and services meet or exceed customers' requirements and expectations. To achieve quality for all work based upon the following principles: All work, as defined in this Order, is conducted through an integrated and effective management system. Management support for planning, organization, resources, direction, and control is essential to quality assurance (QA). Performance and quality improvement require thorough, rigorous assessments and effective corrective actions. All personnel are responsible for achieving and maintaining quality. Risks and adverse mission impacts associated with work processes are minimized while maximizing reliability and performance of work products.

331

Three essays on product quality and pricing  

E-Print Network (OSTI)

This dissertation consists of three essays on product quality and pricing. Essay 1: Pricing and Quality Provision in a Channel: A Model of Efficient Relational Contracts The first essay analyzes how quality concerns affect ...

Nistor, Cristina (Cristina Daniela)

2012-01-01T23:59:59.000Z

332

Prediction accuracy of link-quality estimators  

Science Conference Proceedings (OSTI)

The accuracy of link-quality estimators (LQE) is missioncritical in many application scenarios in wireless sensor networks (WSN), since the link-quality metric is used for routing decisions or neighborhood formation. Link-quality estimation must offer ...

Christian Renner; Sebastian Ernst; Christoph Weyer; Volker Turau

2011-02-01T23:59:59.000Z

333

A time-domain Discontinuous Galerkin method for mechanical resonator quality factor computations  

Science Conference Proceedings (OSTI)

Numerical simulations are becoming increasingly important in the design of micromechanical resonators, in particular for the prediction of complex frequency response in high quality devices where damping is controlled by anchor losses. Frequency based ... Keywords: Anchor loss, Discontinuous Galerkin, Filter diagonalization, Helmholtz, Linear elasticity, MEMS resonator, Quality factor, Time-domain

Sanjay Govindjee; Per-Olof Persson

2012-08-01T23:59:59.000Z

334

An integrated assessment tool to define effective air quality policies at regional scale  

Science Conference Proceedings (OSTI)

In this paper, the Integrated Assessment of air quality is dealt with at regional scale. First the paper describes the main challenges to tackle current air pollution control, including economic aspects. Then it proposes a novel approach to manage the ... Keywords: Air quality modeling, Decision support, Integrated assessment modeling, Model reduction, Multi-objective optimization

Claudio Carnevale; Giovanna Finzi; Enrico Pisoni; Marialuisa Volta; Giorgio Guariso; Roberta Gianfreda; Giuseppe Maffeis; Philippe Thunis; Les White; Giuseppe Triacchini

2012-12-01T23:59:59.000Z

335

Modeling and simulation of new configuration of dynamic voltage restorer for power quality improvement  

Science Conference Proceedings (OSTI)

The dynamic voltage restorer (DVR) is a custom device that is used to maintain the voltage at the load terminals from various power quality problems from a disturbed incoming supply. In this paper, a novel control strategy is described for mitigation ... Keywords: custom device, dynamic voltage restorer (DVR), power quality, sags, sensitive loads, swells

Rosli Omar; Nasrudin Abdul Rahim

2011-04-01T23:59:59.000Z

336

Mixed Waste Integrated Program Quality Assurance requirements plan  

SciTech Connect

Mixed Waste Integrated Program (MWIP) is sponsored by the US Department of Energy (DOE), Office of Technology Development, Waste Management Division. The strategic objectives of MWIP are defined in the Mixed Waste Integrated Program Strategic Plan, and expanded upon in the MWIP Program Management Plan. This MWIP Quality Assurance Requirement Plan (QARP) applies to mixed waste treatment technologies involving both hazardous and radioactive constituents. As a DOE organization, MWIP is required to develop, implement, and maintain a written Quality Assurance Program in accordance with DOE Order 4700.1 Project Management System, DOE Order 5700.6C, Quality Assurance, DOE Order 5820.2A Radioactive Waste Management, ASME NQA-1 Quality Assurance Program Requirements for Nuclear Facilities and ANSI/ASQC E4-19xx Specifications and Guidelines for Quality Systems for Environmental Data Collection and Environmental Technology Programs. The purpose of the MWIP QA program is to establish controls which address the requirements in 5700.6C, with the intent to minimize risks and potential environmental impacts; and to maximize environmental protection, health, safety, reliability, and performance in all program activities. QA program controls are established to assure that each participating organization conducts its activities in a manner consistent with risks posed by those activities.

1994-04-15T23:59:59.000Z

337

Boiler Efficiency vs. Steam Quality- The Challenge of Creating Quality Steam Using Existing Boiler Efficiencies  

E-Print Network (OSTI)

A boiler works under pressure and it is not possible to see what is happening inside of it. The terms "wet steam" and "carry over" are every day idioms in the steam industry, yet very few people have ever seen these phenomena and the actual water movement inside a boiler has remained highly speculative. This paper and support test video of actual boiler operations will illustrate the effects steam quality vs. boiler efficiency during different boiler and steam system demands. There are four different operating situations that effect the steam quality. Each of the following situation will be described in detail using visual aids and supporting literature: Case I: On/Off Feedwater Control: Wide swings in the water level of the boiler can result in unnecessary low water alarms and shut downs. Case II: Reduced Operating Pressure: By running a boiler at a lower pressure, the boiling action within the boiler becomes much more violent causing water to be carried over in to the steam system. Case III: A Demand of 15% over Capacity: Over loading a boiler will cause excessive amounts of water to be carried along with the steam into the system. Case IV: TDS Control: Without proper control of IDS within the boiler carry-over of water into the steam system will occur causing damage to equipment and/or waterhammer.

Hahn, G.

1998-04-01T23:59:59.000Z

338

CONTROL ROD  

DOE Patents (OSTI)

This patent shows a method of making a fuel or control rod for a nuclear reactor. Fuel or control material is placed within a tube and plugs of porous metal wool are inserted at both ends. The metal wool is then compacted and the tube compressed around it as by swaging, thereby making the plugs liquid- impervious but gas-pervious. (AEC)

Walker, D.E.; Matras, S.

1963-04-30T23:59:59.000Z

339

Sensitivity of a Complex Urban Air Quality Model to Input Data  

Science Conference Proceedings (OSTI)

In recent years, urban-scale photochemical simulation models have been developed that are of practical value for predicting air quality and analyzing the impacts of alternative emission control strategies. Although the performance of some urban-...

Christian Seigneur; Thomas W. Tesche; Philip M. Roth; Larry E. Reid

1981-09-01T23:59:59.000Z

340

A Review of Procedures for Updating Air Quality Modeling Techniques for Regulatory Programs  

Science Conference Proceedings (OSTI)

Air quality models are a key component in determining pollution control requirements. To ensure that the best techniques are used, modeling guidance must be flexible and include better techniques as they become available. Revisions to modeling ...

Jawad S. Touma; John S. Irwin; Joseph A. Tikvart; C. Thomas Coulter

1995-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "qc quality control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Standard guide for establishing a quality assurance program for uranium conversion facilities  

E-Print Network (OSTI)

1.1 This guide provides guidance and recommended practices for establishing a comprehensive quality assurance program for uranium conversion facilities. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate health and safety practices and determine the applicability of regulatory limitations prior to use. 1.3 The basic elements of a quality assurance program appear in the following order: FUNCTION SECTION Organization 5 Quality Assurance Program 6 Design Control 7 Instructions, Procedures & Drawings 8 Document Control 9 Procurement 10 Identification and Traceability 11 Processes 12 Inspection 13 Control of Measuring and Test Equipment 14 Handling, Storage and Shipping 15 Inspection, Test and Operating Status 16 Control of Nonconforming Items 17 Corrective Actions 18 Quality Assurance Records 19 Audits 20 TABLE 1 NQA-1 Basic Requirements Relat...

American Society for Testing and Materials. Philadelphia

2004-01-01T23:59:59.000Z

342

Quality Management Office | Brookhaven National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Quality Management Office The Quality Management Office (QMO) works with the line organizations in the development and delivery of programs, activities and services that integrate...

343

Water Quality Act (Montana) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Water Quality Act (Montana) Water Quality Act (Montana) Eligibility Utility Fed. Government Commercial Agricultural Investor-Owned Utility StateProvincial Govt Industrial...

344

Regulations Establishing Water Quality Standards for Surface...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Establishing Water Quality Standards for Surface Water of the State of Arkansas (Arkansas) Regulations Establishing Water Quality Standards for Surface Water of the State of...

345

IAQ in Hospitals - Better Health through Indoor Air Quality Awareness  

E-Print Network (OSTI)

Quality air is fundamental to people's health and well-being. Indoor air quality is an important issue from both a social and economic point of view. Continual advances in medicine and technology necessitate constant reevaluation of the air-conditioning needs of hospital and medical facilities. The application of air conditioning to health facilities presents many problems not encountered in the usual comfort air conditioning design. Hospital air conditioning assumes a more important role than just the promotion of comfort. Studies show that patients in controlled environment generally have more rapid physical improvement than do those in uncontrolled environment. Air quality at hospitals needs special precautions during design and maintenance stage to prevent infections from spreading. 50% of all illnesses are either caused by, or aggravated by, polluted indoor air. The main objective of this paper is to critically review and summarize the available information about IAQ particularly in health care industries. Symptoms of poor IAQ in a building, contaminants causing poor IAQ, features of HVAC systems for a hospital for better IAQ are briefly discussed in this paper. Strategies to improve indoor air quality in hospitals and the current international research to improve indoor air quality are reported in this paper. Based on the extensive interactions with different stake holders of a hospital it is concluded that maintenance of proper indoor quality in a hospital needs meticulous team work among the various members of the hospital at various stages .

Al-Rajhi, S.; Ramaswamy, M.; Al-Jahwari, F.

2010-01-01T23:59:59.000Z

346

System Compatibility of Modern Lighting Control Systems  

Science Conference Proceedings (OSTI)

Development of lighting control technologies continues at rapid rates in efforts to reduce energy usage and improve quality of light and color. Utilities, efficiency engineers, and end users should be aware of emissions and immunity performance of a lighting device before it is accepted for use in incentive and rebate programs prior to deployment in customer facilities. Continuing its efforts in evaluating new lighting control technologies, EPRI, within its Program 170, has tested four lighting control p...

2010-12-23T23:59:59.000Z

347

Evaluation of Lighting and Lighting Control Technologies  

Science Conference Proceedings (OSTI)

Energy efficient lighting and lighting controls have been a means to significant energy savings for many facilities around the world. Advances in lighting sources often allow for the conservation of quality of light while providing more flexibility in the control of light. Additionally, advances in core technologies within the lighting marketplace regularly lead to the introduction of new lamps, fixtures and controls.  With the rapid introduction of new products and designs, it is important to ...

2013-11-15T23:59:59.000Z

348

Water Quality Act (New Mexico) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Act (New Mexico) Act (New Mexico) Water Quality Act (New Mexico) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State New Mexico Program Type Environmental Regulations Provider New Mexico Environment Department This act establishes the Water Quality Control Commission and states the

349

UMTRA technical assistance contractor quality assurance program plan  

SciTech Connect

This Quality Assurance Program Plan (QAPP) provides the primary requirements for the integration of quality functions into all Technical Assistance Contractor (TAC) Project organization activities. The QAPP is the written directive authorized by the TAc Program Manager to accomplish this task and to implement procedures that provide the controls and sound management practices needed to ensure TAC contractual obligations are met. The QA program is designed to use monitoring, audit, and surveillance functions as management tools to ensure that all Project organization functions are executed in a manner that will protect public health and safety, promote the success of the Project, and meet or exceed contract requirements.

Not Available

1994-10-01T23:59:59.000Z

350

C:\Documents and Settings\Fontaca\Desktop\Module 3.prn.pdf  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

March 21, 2007 March 21, 2007 Department of Energy Post Competition Accountability (PCA) Training Module 3: Quality Assurance Surveillance Training Opening Remarks Opening Remarks 3 Ø Module 1: Executive PCA Training Ø Module 2: PCA Practitioner's Training Ø Module 3: Quality Assurance Surveillance Training ü Quality Assurance Evaluators (QAEs) ü Residual Organization (RO) Personnel Ø Module 4: Quality Control Training Ø Module 5: MEO PCA Toolkit Available PCA Training 4 Ø Understand OMB PCA Requirements Ø Understand the Quality Assurance Surveillance Plan (QASP) Ø Understand the QA and Surveillance Procedures and Process Ø Understand the differences between Quality Control (QC) and Quality Assurance (QA) Ø Understand the Roles and Responsibilities of the Quality Assurance Evaluators (QAEs)

351

Alternative Fuels Data Center: Biofuel Quality Program  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Biofuel Quality Biofuel Quality Program to someone by E-mail Share Alternative Fuels Data Center: Biofuel Quality Program on Facebook Tweet about Alternative Fuels Data Center: Biofuel Quality Program on Twitter Bookmark Alternative Fuels Data Center: Biofuel Quality Program on Google Bookmark Alternative Fuels Data Center: Biofuel Quality Program on Delicious Rank Alternative Fuels Data Center: Biofuel Quality Program on Digg Find More places to share Alternative Fuels Data Center: Biofuel Quality Program on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Biofuel Quality Program The Washington State Department of Agriculture (WSDA) Biofuels Quality Program tests and assesses biofuel quality and quantity to resolve any

352

Simulated annealing procedure for on-line control with process dynamics  

Science Conference Proceedings (OSTI)

We study the problem of economic design for a control policy where the sampling interval (m) and control limit (d) are determined by minimizing the expected total quality costs. In this article, we propose a simulated annealing scheme applicable ... Keywords: ARIMA process, Taguchi's method, control policy, expected quality cost, simulated annealing

Shihyu Chou; Min-Chiang Wang

2007-08-01T23:59:59.000Z

353

An integrated model for optimizing weld quality  

SciTech Connect

Welding has evolved in the last few decades from almost an empirical art to an activity embodying the most advanced tools of, various basic and applied sciences. Significant progress has been made in understanding the welding process and welded materials. The improved knowledge base has been useful in automation and process control. In view of the large number of variables involved, creating an adequately large database to understand and control the welding process is expensive and time consuming, if not impractical. A recourse is to simulate welding processes through a set of mathematical equations representing the essential physical processes of welding. Results obtained from the phenomenological models depend crucially on the quality of the physical relations in the models and the trustworthiness of input data. In this paper, recent advances in the mathematical modeling of fundamental phenomena in welds are summarized. State of the art mathematical models, advances in computational techniques, emerging high performance computers, and experimental validation techniques have provided significant insight into the fundamental factors that control the development of the weldment. Current status and scientific issues in heat and fluid flow in welds, heat source metal interaction, and solidification microstructure are assessed. Future research areas of major importance for understanding the fundamental phenomena in weld behavior are identified.

Zacharia, T.; Radhakrishnan, B. [Oak Ridge National Lab., TN (United States); Paul, A.J.; Cheng, C. [Concurrent Technologies Corp., Johnstown, PA (United States)

1995-06-01T23:59:59.000Z

354

Final Information Quality Bulletin for Peer Review | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Final Information Quality Bulletin for Peer Review Final Information Quality Bulletin for Peer Review Final Information Quality Bulletin for Peer Review Final Information Quality...

355

REACTOR CONTROL  

DOE Patents (OSTI)

A control system employed with a high pressure gas cooled reactor in which a control rod is positioned for upward and downward movement into the neutron field from a position beneath the reactor is described. The control rod is positioned by a coupled piston cylinder releasably coupled to a power drive means and the pressurized coolant is directed against the lower side of the piston. The coolant pressure is offset by a higher fiuid pressure applied to the upper surface of the piston and means are provided for releasing the higher pressure on the upper side of the piston so that the pressure of the coolant drives the piston upwardly, forcing the coupled control rod into the ncutron field of the reactor. (AEC)

Fortescue, P.; Nicoll, D.

1962-04-24T23:59:59.000Z

356

FANS - Control  

Science Conference Proceedings (OSTI)

... If set to H+ and a magnet controller is connected, you are ... Typically motors 3, 4, 5, and 6 are fixed for FANS operation A fixed motor will not be ...

357

Quality Control and Captive Rearing Genetics of the Biological Control Agent Trichogramma pretiosum  

E-Print Network (OSTI)

Genetics 4: 189-197. Grenier, S. , and P. De Clercq. 2003.Genetics 4: 189-197. Grenier, S. , and P. De Clercq. 2003.Lassabliere, J. Daumal, and S. Grenier. 2002. Does a cyclic

Gonzalez-Cabrera, Jaime

2011-01-01T23:59:59.000Z

358

CONTROL SYSTEM  

DOE Patents (OSTI)

A boiling water type nuclear reactor power system having improved means of control is described. These means include provisions for either heating the coolant-moderator prior to entry into the reactor or shunting the coolantmoderator around the heating means in response to the demand from the heat engine. These provisions are in addition to means for withdrawing the control rods from the reactor. (AEC)

Shannon, R.H.; Williamson, H.E.

1962-10-30T23:59:59.000Z

359

Quality Assurance Exchange, June 2006  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

V V o lu m e 2 , I ssu e 2 J un e 2 0 0 6 I N S I D E T H I S I S S U E : Secretary Bodman Emphasizes Quality Assurance 1 In the Spotlight: Interview with Ava Holland Quality Assurance Manager CBFO/WIPP 1 "How To" Series on Performing Assessments: Audit Meetings 1 DOE Contractor receives the 2005 Malcolm Baldrige Award for Performance Excellence 2 SQA Work Activity #3: Software Configuration Management 3 Safety Software Central Registry Activities 8 Activities, Updates, & Announcements 9 Upcoming Meetings, Conferences & Training Courses 10 Q U A L I T Y A S S U R A N C E E X C H A N G E Ava Holland is the Quality Assurance Manager for the Carlsbad Field Office (CBFO) at the Waste Isolation Plant (WIPP). Ms. Holland is responsible for

360

Signed Quality Assurance Hub Memo  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

:I I! DR. STEVEN L. KRAHN DEPUTY ASSISTANT SEC SAFETY AND SECCTRITY PROGRAM ENVIRONMENTAL MANAGEMENT SUBJECT: Office of Environmental Management Quality Assurance Performance Assessment, Commitment, and Corrective Action Management Program Launch In a memorandum to the FieldlSite Managers dated July 10,2009, it was announced that the Office of Standards and Quality Assurance (EM-23) had deployed a pilot prototype web-based system (Hub) to facilitate providing real-time status of Quality Assurance (QA) performance assessments and associated corrective actions and commitments. The pilot phase of the system has been completed with exceptional cooperation from the various sites involved. The system has now been transferred to a secured Department of Energy Environmental Management (EM)

Note: This page contains sample records for the topic "qc quality control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Quality Assurance Exchange, September 2007  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3 3 S e p t e m b e r 2 0 0 7 I N S I D E T H I S I S S U E : Focus on Quality Assurance 1 Use of QA Consensus Standards 1 What is the Analytical Services Program? 3 SQA Work Activity #6: Safety Software Design & Implementation 4 HSS QA Activity Corner 6 Upcoming Meetings & Conferences 7 Just for Fun 8 Q U A L I T Y A S S U R A N C E E X C H A N G E HSS FOCUS ON QUALITY ASSURANCE health, as well as the environment, de- crease and productivity increases with the appropriate rigor of quality assurance. The corporate responsibility for ensuring implementation of these five principles rests within the Office of Health, Safety and Security (HSS). HS-20, the Office of Nuclear Safety and Environment, inter- prets QA requirements and develops pol- icy; HS-30, the Office of Corporate Safety

362

Quality Assurance Exchange, January 2007  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 1 J a n u a r y 2 0 0 7 I N S I D E T H I S I S S U E : Departmental Elements Respond to "Improving QA" 1 "How To" Series on Performing Assessments: Post Field Investigation Activities 1 Best Practices: Appropriate Metrics Facilitate Data-Driven IT Decisions 4 SQA Work Activity #4: Procurement and Supplier Management 6 Safety Software Central Registry Activities 7 Upcoming Conferences & Training (relating to DOE / Nuclear & General QA) 8 Q U A L I T Y A S S U R A N C E E X C H A N G E In his memorandum "Improving Quality As- surance," dated April 26, 2006, the Secretary of Energy stated the Department's priority of implementing an effective Quality Assurance program (QAP) and promulgating a quality culture throughout the DOE complex. The

363

Quality Assurance Exchange, April 2009  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5 5 , I s s u e 1 M a r c h / A p r i l 2 0 0 9 I N S I D E T H I S I S S U E : In the Spotlight: George Detsis, Program Manager, ASP 1 Special Feature: Blurred Vision: Do Our Business Leaders See What Quality is All About? 3 SQA Work Activity: Problem Reporting and Corrective Action 7 HSS QA Activity Corner 8 Quality Council 9 QA-Related Meetings & Conferences 10 Director's Note 10 Lessons Learned: Insufficient Training Causes Near Miss Events and Injuries 5 Q U A L I T Y A S S U R A N C E E X C H A N G E The Analytical Services Program (ASP) encompasses approximately 40 annual qualification audits of analytical laboratories and commercial waste operation vendors, semi-annual quality assurance (QA) proficiency testing of 120 domestic and international analytical laboratories, and the

364

Weapons Quality Assurance Qualification Standard  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5-2008 5-2008 September 2008 DOE STANDARD WEAPON QUALITY ASSURANCE QUALIFICATION STANDARD NNSA Weapon Quality Assurance Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1025-2008 This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ DOE-STD-1025-2008 iv INTENTIONALLY BLANK DOE-STD-1025-2008 v TABLE OF CONTENTS ACKNOWLEDGMENT ................................................................................................................ vii PURPOSE....................................................................................................................................

365

Quality engineering as a discipline of study.  

SciTech Connect

The current framework for quality scholarship in the United States ranges from the training and education of future quality engineers, managers, and professionals to focused and sustained research initiatives that, through academic institutions and other organizations, aim to improve the knowledge and application of quality across a variety of sectors. Numerous quality journals also provide a forum for professional dissemination of information.

Kolb, Rachel R.; Hoover, Marcey L.

2012-12-01T23:59:59.000Z

366

Enterprise Data Quality: A Pragmatic Approach  

Science Conference Proceedings (OSTI)

Enterprise data—the data that is created, used and shared by a corporation in conducting business—is a critical business resource that must be analyzed, architected and managed with data quality as a guiding principle. This paper presents ... Keywords: data quality methodology, data quality metrics, data quality, distributed systems, process flow through

Amjad Umar; George Karabatis; Linda Ness And Bruce Horowitz; Ahmed Elmagardmid

1999-10-01T23:59:59.000Z

367

An economic model of software quality costs  

Science Conference Proceedings (OSTI)

As of today there is very little knowledge is available about the economics of software quality. The costs incurred and benefits of implementing different quality practices over the software development life cycle are not well understood. There are some ... Keywords: TQM, quality cost model, software quality

Amel Kolašinac; Ljubomir Lazic; Dženan Avdic

2008-11-01T23:59:59.000Z

368

Utah Department of Environmental Quality | Open Energy Information  

Open Energy Info (EERE)

Environmental Quality Environmental Quality Name Utah Department of Environmental Quality Address 195 North 1950 West Place Salt Lake City, Utah Phone number 801.536.4400 Website http://www.deq.utah.gov/ Coordinates 40.7733661°, -111.9472798° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":40.7733661,"lon":-111.9472798,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

369

Montana Department of Environmental Quality | Open Energy Information  

Open Energy Info (EERE)

Montana Department of Environmental Quality Montana Department of Environmental Quality Name Montana Department of Environmental Quality Address 1520 E. 6th Ave, PO Box 200901 Place Helena, Montana Zip 59620-0901 Phone number 406-444-2544 Website http://www.deq.mt.gov/default. Coordinates 46.58741°, -112.013743° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":46.58741,"lon":-112.013743,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

370

Updated projections of air quality impacts for electric cars  

DOE Green Energy (OSTI)

Future air pollution emissions and resulting air quality are projected for the five primary air pollutants: total suspended particulates (TSP), sulfur oxides (SO/sub x/), nitrogen oxides (NO/sub x), total hydrocarbons (THC), and carbon monoxide (CO). Separate projections are made for three future years - 1980, 1990, and 2000 - and for three assumed levels of electric car use - zero, 10%, and 100%. Emissions and air quality are analyzed for each of the 24 Air Quality Control Regions (AQCRs) having the largest populations in 1975. Emission projections are made using an improved version of the Regional Emissions Projection System which uses the 1975 National Emissions Data System, 1977 state OBERS growth projections, recent state implementation plans and new source performance standards, and electric utility fuel forecasts from the Recharge Capacity Projection System.

Collins, M.M.

1979-07-01T23:59:59.000Z

371

Idaho Department of Environmental Quality | Open Energy Information  

Open Energy Info (EERE)

Quality Quality Jump to: navigation, search Name Idaho Department of Environmental Quality Address 1410 N. Hilton Place Boise, Idaho Zip 83706 Phone number 208-373-0502 Website http://www.deq.idaho.gov/ Coordinates 43.6170709°, -116.2460439° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":43.6170709,"lon":-116.2460439,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

372

Heliogyro Control  

E-Print Network (OSTI)

Heliogyros with blade length-to-width aspect ratios of 1000 can achieve ambitious science mission goals, but such designs have not been analyzed with rigor. Archived heliogyro analyses indicate that aspect ratios of 1000 are feasible, but the calculations supporting this claim are based on the simplifying assumptions of decoupled twist, vertical deflection, and in-plane deflection of the blades. In making such simplifications, the equations become more tractable, but crucial behavioral characteristics are possibly lost. Without a more rigorous analytical investigation, the reliability and robustness of the heliogyro remains in doubt. However, with verified control models and an appropriate operations strategy, performance of aggressive heliogyro designs can be presumed. This thesis asserts that heliogyro blades with aspect ratios of 1000:1 can sufficiently operate in space. The crux of this investigation is a high-fidelity model that accurately represents a heliogyro blade. Pitch controls command the thrust vector of the large sail structure. Although the validation model mimics a real solar sail, the controller is driven toward the most simplified configuration. The results of this research validate that a model-based controller that neglects blade twist, coning, and wrinkling can sufficiently control the thrust vector of a suitably designed heliogyro.

Richard S. Blomquist; Dimitrios Apostolopoulos; George Kantor; Andreas Von Flotow

2009-01-01T23:59:59.000Z

373

FIELD TEST OF THE FLAME QUALITY INDICATOR  

Science Conference Proceedings (OSTI)

The flame quality indicator concept was developed at BNL specifically to monitor the brightness of the flame in a small oil burner and to provide a ''call for service'' notification when the brightness has changed from its setpoint, either high or low. In prior development work BNL has explored the response of this system to operational upsets such as excess air changes, fouled atomizer nozzles, poor fuel quality, etc. Insight Technologies, Inc. and Honeywell, Inc. have licensed this technology from the U.S. Department of Energy and have been cooperating to develop product offerings which meet industry needs with an optimal combination of function and price. Honeywell has recently completed the development of the Flame Quality Monitor (FQM or Honeywell QS7100F). This is a small module which connects via a serial cable to the burners primary operating control. Primary advantages of this approach are simplicity, cost, and ease of installation. Call-for-service conditions are output in the form of front panel indicator lights and contact closure which can trigger a range of external communication options. Under this project a field test was conducted of the FQM in cooperation with service organizations in Virginia, Pennsylvania, New Jersey, New York, and Connecticut. At total of 83 field sites were included. At each site the FQM was installed in parallel with another embodiment of this concept--the Insight AFQI. The AFQI incorporates a modem and provides the ability to provide detailed information on the trends in the flame quality over the course of the two year test period. The test site population was comprised of 79.5% boilers, 13.7% warm air furnaces, and 6.8% water heaters. Nearly all were of residential size--with firing rates ranging from 0.6 gallons of oil per hour to 1.25. During the course of the test program the monitoring equipment successfully identified problems including: plugged fuel lines, fouled nozzles, collapsed combustion chambers, and poor fuel pump cut-off. Service organizations can use these early indications to reduce problems and service costs. There were also some ''call-for-service'' indications for which problems were not identified. The test program also showed that monitoring of the flame can provide information on burner run times and this can be used to estimate current oversize factors and to determine actual fuel usage, enabling more efficient fuel delivery procedures.

Andrew M. Rudin; Thomas Butcher; Henry Troost

2003-02-04T23:59:59.000Z

374

Innovative Lighting-Control and Demand-Response Systems  

Science Conference Proceedings (OSTI)

This EPRI technical update continues the technical assessment of modern lighting-control and demand-response (DR) systems in the following product areas: programmable timer switches, scalable lighting-control systems, Zigbee-based add-on control systems, and Z-Wave–based lighting controllers. This research helps to demonstrate that there is a wide variety of advanced lighting controls entering the marketplace each year, and it describes how they respond to a range of DR and power-quality ...

2013-12-12T23:59:59.000Z

375

Radiological Control  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE-STD-1098-2008 October 2008 DOE STANDARD RADIOLOGICAL CONTROL U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. ii DOE-STD-1098-2008 This document is available on the Department of Energy Technical Standards Program Website at http://www.standards.doe.gov/ DOE-STD-1098-2008 Radiological Control DOE Policy October 2008 iii Foreword The Department of Energy (DOE) has developed this Standard to assist line managers in meeting their responsibilities for implementing occupational radiological control programs. DOE has established regulatory requirements for occupational radiation protection in Title 10 of the Code of Federal

376

ACCESS CONTROL  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TERMS/DEFINITIONS FROM DOE M 470.4-7 TERMS/DEFINITIONS FROM DOE M 470.4-7 ACCESS CONTROL. The process of permitting access or denying access to information, facilities, nuclear materials, resources, or designated security areas. ACCESS CONTROL MEASURES. Hardware and software features, physical controls, operating procedures, administrative procedures, and various combinations of these designed to detect or prevent unauthorized access to classified information; special nuclear materials; Government property; automated information systems, facilities, or materials; or areas containing the above and to enforce use of these measures to protect Departmental security and property interests. CRITICAL PATH SCENARIO. An adversary-based scenario that is generated during the conduct of a vulnerability assessment and accounts for adversary tactics that

377

Quality monitored distributed voting system  

DOE Patents (OSTI)

A quality monitoring system can detect certain system faults and fraud attempts in a distributed voting system. The system uses decoy voters to cast predetermined check ballots. Absent check ballots can indicate system faults. Altered check ballots can indicate attempts at counterfeiting votes. The system can also cast check ballots at predetermined times to provide another check on the distributed voting system. 6 figs.

Skogmo, D.

1997-03-18T23:59:59.000Z

378

Lipid Oxidation and Quality Division  

Science Conference Proceedings (OSTI)

Name AffiliationCity, State, CountryLipid Oxidation & Quality Division2013 Members327 Members as of October 1, 2013, Process Plus LLCCincinnati, OH, USAAbraham, TimothyCargill IncHopkins, MN, USAAbrams, JimCargill Corn Milling NAMemphis, TN, USAAbril, Rube

379

Voltage Quality Improvement Using DVR  

Science Conference Proceedings (OSTI)

The problem of voltage sags and Swells and its severe impact on sensitive loads is well known. To solve this problem, custom power devices are used. One of those devices is the Dynamic Voltage Restorer (DVR), which is one of the most efficient and effective ... Keywords: Dynamic Voltage Restorer (DVR), Voltage sags, Voltage swells, Custom power, Power Quality

M. Arun Bhaskar; S. S. Dash; C. Subramani; M. Jagadeesh Kumar; P. R. Giresh; M. Varun Kumar

2010-03-01T23:59:59.000Z

380

International Thermonuclear Experimental Reactor U.S. Home Team Quality Assurance Plan  

Science Conference Proceedings (OSTI)

The International Thermonuclear Experimental Reactor (ITER) project is unique in that the work is divided among an international Joint Central Team and four Home Teams, with the overall responsibility for the quality of activities performed during the project residing with the ITER Director. The ultimate responsibility for the adequacy of work performed on tasks assigned to the U.S. Home Team resides with the U.S. Home Team Leader and the U.S. Department of Energy Office of Fusion Energy (DOE-OFE). This document constitutes the quality assurance plan for the ITER U.S. Home Team. This plan describes the controls exercised by U.S. Home Team management and the Performing Institutions to ensure the quality of tasks performed and the data developed for the Engineering Design Activities assigned to the U.S. Home Team and, in particular, the Research and Development Large Projects (7). This plan addresses the DOE quality assurance requirements of 10 CFR 830.120, "Quality Assurance." The plan also describes U.S. Home Team quality commitments to the ITER Quality Assurance Program. The ITER Quality Assurance Program is based on the principles described in the International Atomic Energy Agency Standard No. 50-C-QA, "Quality Assurance for Safety in Nuclear Power Plants and Other Nuclear Facilities." Each commitment is supported with preferred implementation methodology that will be used in evaluating the task quality plans to be submitted by the Performing Institutions. The implementing provisions of the program are based on guidance provided in American National Standards Institute/American Society of Mechanical Engineers NQA-1 1994, "Quality Assurance." The individual Performing Institutions will implement the appropriate quality program provisions through their own established quality plans that have been reviewed and found to comply with U.S. Home Team quality assurance plan commitments to the ITER Quality Assurance Program. The extent of quality program provisions applied to any specific task is proportional to, and appropriate for, the safety and/or project success significance of the task, as determined by the cognizant Technical Manager and the U.S. Home Team Quality Coordinator. In general, the research and development activities will have only those controls appropriate to ensure the quality of the manufacturing activity and validate the resultant data.

Sowder, W. K.

1998-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "qc quality control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

SQA(TM): Surface Quality Assured Steel Bar Program  

SciTech Connect

OG Technologies, Inc. (OGT) has led this SQA (Surface Quality Assured Steel Bar) program to solve the major surface quality problems plaguing the US special quality steel bars and rods industry and their customers, based on crosscutting sensors and controls technologies. Surface defects in steel formed in a hot rolling process are one of the most common quality issues faced by the American steel industry, accounting for roughly 50% of the rejects or 2.5% of the total shipment. Unlike other problems such as the mechanical properties of the steel product, most surface defects are sporadic and cannot be addressed based on sampling techniques. This issue hurts the rolling industry and their customers in their process efficiency and operational costs. The goal of this program is to develop and demonstrate an SQA prototype, with synergy of HotEye® and other innovations, that enables effective rolling process control and efficient quality control. HotEye®, OGT’s invention, delivers high definition images of workpieces at or exceeding 1,450?C while the workpieces travel at 100 m/s. The elimination of surface defect rejects will be achieved through the integration of imaging-based quality assessment, advanced signal processing, predictive process controls and the integration with other quality control tools. The SQA program team, composed of entities capable of and experienced in (1) research, (2) technology manufacturing, (3) technology sales and marketing, and (4) technology end users, is very strong. There were 5 core participants: OGT, Georgia Institute of Technology (GIT), University of Wisconsin (UW), Charter Steel (Charter) and ArcelorMittal Indiana Harbor (Inland). OGT served as the project coordinator. OGT participated in both research and commercialization. GIT and UW provided significant technical inputs to this SQA project. The steel mills provided access to their rolling lines for data collection, design of experiments, host of technology test and verification, and first-hand knowledge of the most advanced rolling line operation in the US. This project lasted 5 years with 5 major tasks. The team successfully worked through the tasks with deliverables in detection, data analysis and process control. Technologies developed in this project were commercialized as soon as they were ready. For instance, the advanced surface defect detection algorithms were integrated into OGT’s HotEye® RSB systems late 2005, resulting in a more matured product serving the steel industry. In addition to the commercialization results, the SQA team delivered 7 papers and 1 patent. OGT was also recognized by two prestigious awards, including the R&D100 Award in 2006. To date, this SQA project has started to make an impact in the special bar quality industry. The resulted product, HotEye® RSB systems have been accepted by quality steel mills worldwide. Over 16 installations were completed, including 1 in Argentina, 2 in Canada, 2 in China, 2 in Germany, 2 in Japan, and 7 in the U.S. Documented savings in reduced internal rejects, improved customer satisfaction and simplified processes were reported from various mills. In one case, the mill reported over 50% reduction in its scrap, reflecting a significant saving in energy and reduction in emission. There exist additional applications in the steel industry where the developed technologies can be used. OGT is working toward bringing the developed technologies to more applications. Examples are: in-line inspection and process control for continuous casting, steel rails, and seamless tube manufacturing.

Tzyy-Shuh Chang; Jianjun Shi; Shiyu Zhou

2009-03-03T23:59:59.000Z

382

Radiological Control  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE-STD-1098-2008 October 2008 ------------------------------------- Change Notice 1 May 2009 DOE STANDARD RADIOLOGICAL CONTROL U.S. Department of Energy SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1098-2008 ii This document is available on the Department of Energy Technical Standards Program Website at http://www.standards.doe.gov/ iii DOE-STD-1098-2008 Change Notice 1: DOE-STD-1098-2008, Radiological Control Standard Section/page/paragraph Change Section 211, page 2-3, paragraph 1 Add new paragraph 1: "Approval by the appropriate Secretarial Officer or designee should be required

383

Nonlinear robust temperature-humidity control in livestock buildings  

Science Conference Proceedings (OSTI)

The physical environment of farm animals inside livestock buildings is primarily characterised by hygro-thermal parameters and air quality. These parameters are influenced by the interaction with the outdoor situation on one hand, and the livestock, ... Keywords: Humidity control, Livestock buildings, Robust control, Temperature control

A. G. Soldatos; K. G. Arvanitis; P. I. Daskalov; G. D. Pasgianos; N. A. Sigrimis

2005-12-01T23:59:59.000Z

384

Secondary Control for Voltage Unbalance Compensation in an Islanded Microgrid  

E-Print Network (OSTI)

Secondary Control for Voltage Unbalance Compensation in an Islanded Microgrid Mehdi Savaghebi1 microgrid. The aim of the proposed control approach is to enhance the voltage quality at the point of common unbalance. Keywords-distributed generation; microgrid; secondary control; voltage unbalance compensation I

Vasquez, Juan Carlos

385

Data quality objectives for the initial fuel conditioning examinations  

SciTech Connect

The Data Quality Objectives (DQOs) were established for the response of the first group of fuel samples shipped from the K West Basin to the Hanford 327 Building hot cells for examinations to the proposed Path Forward conditioning process. Controlled temperature and atmosphere furnace testing testing will establish performance parameters using the conditioning process (drying, sludge drying, hydride decomposition passivation) proposed by the Independent Technical Assessment (ITA) Team as the baseline.

Lawrence, L.A.

1995-05-23T23:59:59.000Z

386

Quality Assurance Program Plan | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Quality Assurance Program Plan Quality Assurance Program Plan Quality Assurance Program Plan The achievement of quality in LM activities and products requires implementation of a formal Quality Assurance (QA) Program. This program establishes principles, requirements, practices, and methods for integrating quality into the daily operations of our programs and projects. The QA Program functions as a management tool to ensure that quality objectives are achieved throughout LM's technical, administrative, and operational functions. Achieving quality is the responsibility of managers as well as those who perform the work. Each employee is expected to do the job in accordance with procedures and other requirements. The name LM must represent quality to us, our customers, our service providers, and our

387

Alternative Fuels Data Center: Fuel Quality Standards  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Fuel Quality Standards Fuel Quality Standards to someone by E-mail Share Alternative Fuels Data Center: Fuel Quality Standards on Facebook Tweet about Alternative Fuels Data Center: Fuel Quality Standards on Twitter Bookmark Alternative Fuels Data Center: Fuel Quality Standards on Google Bookmark Alternative Fuels Data Center: Fuel Quality Standards on Delicious Rank Alternative Fuels Data Center: Fuel Quality Standards on Digg Find More places to share Alternative Fuels Data Center: Fuel Quality Standards on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Fuel Quality Standards The South Dakota Department of Public Safety may promulgate rules establishing: Standards for the maximum volume percentages of ethanol and methanol

388

Urban scale integrated assessment for London: Which emission reduction strategies are more effective in attaining prescribed PM10 air quality standards by 2005?  

Science Conference Proceedings (OSTI)

Tightening of air quality standards for populated urban areas has led to increasing attention to assessment of air quality management areas (AQMAs) where exceedance occurs, and development of control strategies to eliminate such exceedance. Software ... Keywords: Air quality management, Dispersion modelling, Emission reduction strategies, Integrated assessment, Particulate matter, Urban air pollution

A. Mediavilla-Sahagún; H. M. ApSimon

2006-04-01T23:59:59.000Z

389

Simulation Study on Ship Motion Control Algorithm Based on AOCS Structure  

Science Conference Proceedings (OSTI)

Based on linear dynamic equation optimization, a particular control structure is introduced in this paper, which can be acronymized as AOCS (Asymptotic Observer + Corrector + Speed control law ), and the control quality requirements especially the economy ... Keywords: Ship motion control, Asymptotic observer, Optimal control, Corrector

Hongbo Wang; Yiping Guo; Zhao Pan

2010-06-01T23:59:59.000Z

390

Improvements in power quality and efficiency with a new AC/DC high current converter  

Science Conference Proceedings (OSTI)

A very flexible AC/DC converter featuring high-output current, reduced voltage ripple and highly adjustable current control is described. The whole system consists of four stages and uses a proper switching technique in conjunction with a feedback control ... Keywords: AC/DC converter, FFT, electrical distribution systems, high direct-current, power quality

Francesco Muzi; Luigi Passacantando

2008-05-01T23:59:59.000Z

391

CSP 587: Software Quality Management S. Kan, Software Quality engineering, Addison-Wesley.  

E-Print Network (OSTI)

CSP 587: Software Quality Management Texts S. Kan, Software Quality engineering, Addison hours · Quality Appraisal Programs 5 hours SEI's Capability Maturity Model ISO 9000 Total 45 hours CSP

Heller, Barbara

392

The design and implementation of a demonstration supplementary control system  

E-Print Network (OSTI)

The overall goal of the Chestnut Ridge Supplemental Control System (SCS) demonstration project was to demonstrate how an existing monitoring network, existing air quality models, and existing meteorological forecasting ...

Ruane, Michael Frederick

1980-01-01T23:59:59.000Z

393

Quality Assurance Exchange, December 2005  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3 3 D e c e m be r 2 0 0 5 I N S I D E T H I S I S S U E : In the Spotlight: Interview with Colette Broussard, Quality Assurance Administrator, Office of EM 1 "How To" Series on Performing Assessments: Preparing for Auditing Success 1 Lessons Learned: BNL conducts 3rd Consecutive Third- Party Evaluation of its Assessment Program 2 SQA Work Activity 2 Software Risk Management 3 Announcements, Updates, and Activities 7 Upcoming Meetings &Workshops 9 Q U A L I T Y A S S U R A N C E E X C H A N G E Colette Broussard has extensive back- ground in DOE as a Quality Assurance Engineer, along with experience in safety engineering and environmental management. Colette joined the DOE in 1983 as a QA Engineer at the Pinel- las Plant. She transferred to Headquar-

394

Brookhaven's Drinking-Water Quality  

NLE Websites -- All DOE Office Websites (Extended Search)

Water Quality Water Quality The Lab's finished drinking water is produced with pride by the staff of BNL's Water Treatment Facility Home Groundwater Consumer Confidence Reports Water Treatment Process Resources Tap Water Recommendations Water Cooler Cleaning Additional Resources Brookhaven Lab Drinking Water Brookhaven produces its own drinking water for all employees, facility-users, guests, residents, and visitors on site at its Water Treatment Facility (WTF). BNL's drinking water is pumped from groundwater by five active wells and processed at the WTF which can handle up to 6 million gallons per day. The "finished" water is sent to the Lab's two storage towers and then distributed around the site via 45 miles of pipeline. To ensure that Brookhaven's water meets all applicable local, state, and

395

Quality Assurance of Computational Model  

NLE Websites -- All DOE Office Websites (Extended Search)

of Computational of Computational Models Presented at the Annual Department of Presented at the Annual Department of Energy Quality Council Meeting Subir K. Sen Sub . Se Office of Quality Assurance, HS-33 December 7, 2011 Outline Outline * Introduction Introduction * GAO Report 11-143 i l h C il * National Research Council Focus * DOE Model Validation/Performance * Summary 2 Introduction Introduction * Computer models are used in EM's massive Computer models are used in EM s massive clean up effort to model physical and biogeochemical processes biogeochemical processes. * Results from these computational models are often used to make costly cleanup decisions often used to make costly cleanup decisions including selection, performance assessment and annual

396

NETL: Air Quality III Conference  

NLE Websites -- All DOE Office Websites (Extended Search)

Air Quality III Conference - September 12, 2002 Air Quality III Conference - September 12, 2002 Table of Contents Disclaimer Papers and Presentations Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government or any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof.

397

Quality Assurance Lessons Learned 2010  

NLE Websites -- All DOE Office Websites (Extended Search)

Quality Council Lessons Learned Quality Council Lessons Learned Vendor Supplier Deficiencies: Myers Drum Concerns at Los Alamos National Laboratory (LANL) The Office of Packaging and Transportation, in the DOE Office of Environmental Management, issued a Safety Alert in January 12, 2010, (Issue Number: DOE/OPT/SA-01) alerting the DOE packaging and transportation community about potential failure associated with 55 and 30-gallon carbon steel drum closure rings. On January 13, 2010, HSS issued a Data Collection Sheet (DCS) to all DOE sites citing the concerns as well. Those concerns arose while contractors were performing receipt inspections on several lots of drums and drum rings received at the Hanford site and Lawrence Livermore National Laboratory (LLNL). It was determined that the drum

398

1998 Cost and Quality Annual  

Gasoline and Diesel Fuel Update (EIA)

8) 8) Distribution Category UC-950 Cost and Quality of Fuels for Electric Utility Plants 1998 Tables June 1999 Energy Information Administration Office of Coal, Nuclear, Electric and Alternate Fuels U.S. Department of Energy Washington DC 20585 This report was prepared by the Energy Information Administration, the independent statistical and analytical agency within the Department of Energy. The information contained herein should not be construed as advocating or reflecting any policy position of the Department of Energy or any other organization. Contacts The annual publication Cost and Quality of Fuels for Electric Utility Plants (C&Q) is no longer published by the EIA. The tables presented in this document are intended to replace that annual publication. Questions regarding the availability of these data should

399

Application Guidelines for Motor Control Circuits Protection and Control Circuits and Devices in the Voltage Sag Environment: System Compatibility Research  

Science Conference Proceedings (OSTI)

Common electrical disturbances in the power system-such as voltage sags and brief interruptions-can disrupt the performance of electronic equipment. This project, part of EPRI's ongoing Power Quality Measurements and Testing program, focused on developing a system compatibility test protocol and conducting power quality performance testing for motor voltage controllers operating in a voltage sag environment.

2000-12-12T23:59:59.000Z

400

REACTOR CONTROL  

DOE Patents (OSTI)

This patent relates to nuclear reactors of the type which utilize elongited rod type fuel elements immersed in a liquid moderator and shows a design whereby control of the chain reaction is obtained by varying the amount of moderator or reflector material. A central tank for containing liquid moderator and fuel elements immersed therein is disposed within a surrounding outer tank providing an annular space between the two tanks. This annular space is filled with liquid moderator which functions as a reflector to reflect neutrons back into the central reactor tank to increase the reproduction ratio. Means are provided for circulating and cooling the moderator material in both tanks and additional means are provided for controlling separately the volume of moderator in each tank, which latter means may be operated automatically by a neutron density monitoring device. The patent also shows an arrangement for controlling the chain reaction by injecting and varying an amount of poisoning material in the moderator used in the reflector portion of the reactor.

Ruano, W.J.

1957-12-10T23:59:59.000Z

Note: This page contains sample records for the topic "qc quality control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Surveillance Guides - Work Control Process  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Work Control Process Work Control Process 1.0 Objective The objective of this surveillance guide is to provide lines of inquiry for evaluating the effectiveness of the contractor's work control process. Users should be cognizant that the lines of inquiry need to be further tailored to fit specific facilities or activities in accordance with contractual mechanisms such as Maintenance Implementation Plans, Conduct of Operations Implementation Plans, and the Integrated Safety Management System Description. 2.0 References 2.1 DOE 4330.4B Maintenance Management Program 2.2 48 CFR 1970.5204-2 Department of Energy Acquisition Regulations 2.3 DOE O 5480.19, Conduct of Operations 2.4 10 CFR 830.120, Quality Assurance 3.0 Requirements Implemented This surveillance is conducted to verify implementation of Core

402

System Compatibility of Modern Lighting Control Systems  

Science Conference Proceedings (OSTI)

The state of the energy industry combined with growing economic pressures will drive accelerated use of energy-efficient dimmable lighting devices and control systems. While penetration and application will be different across customer sectors, the goal is to dynamically reduce lighting load without compromising productivity and the quality of light and life in a timely manner. Continual improvement of dimmable devices and controls is paramount to achieving that goal. EPRI research concepts in system com...

2011-10-11T23:59:59.000Z

403

IT Quality Assurance | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Quality Quality Assurance IT Quality Assurance Quality, error-free work holds down costs. Avoiding mistakes and rework saves valuable time, effort, and materials. Quality assurance provides the mechanisms for paying close attention to details so that tasks are completed correctly and accurately every step of the way. A quality assurance role should be established for all projects. Software Quality Assurance Plan Example (pdf) An example of a software quality assurance plan developed from an actual DOE project SQA plan based on DOE G 200.1-1A, Software Engineering Methodology. Structured Walkthrough Training and Guidance (pdf) Classroom or individual project team training and materials on how to conduct structured walkthroughs (peer review of products/code). This process guide describes how to conduct a structured walkthrough during the

404

Quality Assurance Procedures in the Oklahoma Mesonetwork  

Science Conference Proceedings (OSTI)

High quality data sources are critical to scientists, engineers, and decision makers alike. The models that scientists develop and test with quality-assured data eventually become used by a wider community, from policy makers’ long-term ...

Mark A. Shafer; Christopher A. Fiebrich; Derek S. Arndt; Sherman E. Fredrickson; Timothy W. Hughes

2000-04-01T23:59:59.000Z

405

Lipid Oxidation and Quality Division Poster Competition  

Science Conference Proceedings (OSTI)

Lipid Oxidation and Quality Division student award for best poster presentation at the AOCS Annual Meeting & Expo. Lipid Oxidation and Quality Division Poster Competition Divisions achievement agricultural analytical application award awards biote

406

A Total Energy & Water Quality Management System  

Science Conference Proceedings (OSTI)

This report develops a generic model for an energy and water quality management system for the water community, and defines standard specifications for software applications required to minimize energy costs within the constraints of water quality and operation goals.

1999-09-30T23:59:59.000Z

407

Artistic rendering to represent quality of information  

Science Conference Proceedings (OSTI)

The representation of information quality, also known as "verity visualization," can be explained as a judgment of the accuracy of specific information in a dataset relative to the whole. The visualization of information quality is an important factor ...

Katharine H. Wray

2005-05-01T23:59:59.000Z

408

Ambient Air Quality Criteria (Manitoba, Canada)  

Energy.gov (U.S. Department of Energy (DOE))

The Manitoba Ambient Air Quality Criteria schedule lists maximum time-based pollutant concentration levels for the protection and preservation of ambient air quality within the Province of Manitoba...

409

Air Pollution Control Program (South Dakota) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Air Pollution Control Program (South Dakota) Air Pollution Control Program (South Dakota) Air Pollution Control Program (South Dakota) < Back Eligibility Utility Fed. Government Commercial Agricultural Investor-Owned Utility State/Provincial Govt Industrial Construction Municipal/Public Utility Local Government Residential Installer/Contractor Rural Electric Cooperative Tribal Government Low-Income Residential Schools Retail Supplier Institutional Multi-Family Residential Systems Integrator Fuel Distributor Nonprofit General Public/Consumer Transportation Program Info State South Dakota Program Type Siting and Permitting Provider South Dakota Department of Environment and Natural Resources South Dakota's Air Pollution Control Program is intended to maintain air quality standards through monitoring the ambient air quality throughout the

410

Inferential control -- Part 1: Crude unit advanced controls pass accuracy and repeatability tests  

Science Conference Proceedings (OSTI)

An inferential model is one that provides a quality for which an analyzer is not available. This type of model uses readily available physical measurements -- such as temperatures, pressures, and flow rates -- to infer a quality such as kerosine flash point. The No. 2 crude distillation unit (CDU-2) at Singapore Refining Co. Pte. Ltd.'s Pulau Merlimau refinery has a nominal 130,000 b/d capacity. It produces naphtha, kerosine, diesel, and residue products from a wide range of crude blends. Over the past 12 months, extensive advanced control applications have been implemented on the unit. This first of two articles will describe the control system and its implementation. The second will outline the project's achievements, including reduced quality giveaway and increased profits. The paper describes background of the company and unit, the process, project implementation, the Infer model, model tuning, closed-loop control, feed rate maximization, and economic monitoring.

San, Y.P. (Singapore Refining Co. Ptd. Ltd., Pulau Merlimau (Singapore)); Landells, K.C.; Mackay, D.C. (BP Oil International, London (United Kingdom))

1994-11-28T23:59:59.000Z

411

Life Cycle Asset Management - Quality Assurance -  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

17 17 Quality Assurance March 1996 Department of Energy Office of Field Management Office of Project and Fixed Asset Management Contents GPG-FM-017 March 1996 iii ACKNOWLEDGEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v 1. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 Applicability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.2 Graded Approach . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2. PRINCIPLES AND PROCESSES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Goals, Principles and Framework . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1.1 Quality Assurance Goals and Principles . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1.2 Quality Assurance Framework . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.2 Quality Assurance and Project Phases . . . . .

412

Malcolm Baldrige National Quality Award Application Data  

Science Conference Proceedings (OSTI)

Malcolm Baldrige National Quality Award Application Data—1988- 2013. Following is data on the application process for ...

2013-08-07T23:59:59.000Z

413

South Coast Air Quality Management District  

Science Conference Proceedings (OSTI)

South Coast Air Quality Management District. NVLAP Lab Code: 101567-0. Address and Contact Information: 21865 Copley ...

2013-08-09T23:59:59.000Z

414

Water Quality (Oklahoma) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

(Oklahoma) Water Quality (Oklahoma) Eligibility Agricultural Commercial Construction Fuel Distributor General PublicConsumer Industrial InstallerContractor Institutional...

415

Water Quality Standards Implementation (Oklahoma) | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Implementation (Oklahoma) Water Quality Standards Implementation (Oklahoma) Eligibility Agricultural Construction Fuel Distributor Industrial InstallerContractor Investor-Owned...

416

SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Project Tracking...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

& SYSTEMS ENGINEERING PROGRAM: Project Planning Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Design Checklist Energy.gov Careers & Internships Policy &...

417

SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Project Planning...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SYSTEMS ENGINEERING PROGRAM: Requirements Management Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Project Tracking Checklist Energy.gov Careers & Internships Policy &...

418

SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Design...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SYSTEMS ENGINEERING PROGRAM: Requirements Management Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Project Tracking Checklist Energy.gov Careers & Internships Policy &...

419

SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM : Acceptance Checklist...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

& SYSTEMS ENGINEERING PROGRAM: Software Design Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Project Tracking Checklist Energy.gov Careers & Internships Policy &...

420

FRAMES Software System: Linking to the Statistical Package R  

SciTech Connect

This document provides requirements, design, data-file specifications, test plan, and Quality Assurance/Quality Control protocol for the linkage between the statistical package R and the Framework for Risk Analysis in Multimedia Environmental Systems (FRAMES) Versions 1.x and 2.0. The requirements identify the attributes of the system. The design describes how the system will be structured to meet those requirements. The specification presents the specific modifications to FRAMES to meet the requirements and design. The test plan confirms that the basic functionality listed in the requirements (black box testing) actually functions as designed, and QA/QC confirms that the software meets the client’s needs.

Castleton, Karl J.; Whelan, Gene; Hoopes, Bonnie L.

2006-12-11T23:59:59.000Z

Note: This page contains sample records for the topic "qc quality control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Improving Indoor Environmental Quality and Energy Performance of Modular  

NLE Websites -- All DOE Office Websites (Extended Search)

Indoor Environmental Quality and Energy Performance of Modular Indoor Environmental Quality and Energy Performance of Modular Classroom HVAC Systems Title Improving Indoor Environmental Quality and Energy Performance of Modular Classroom HVAC Systems Publication Type Conference Proceedings Year of Publication 2005 Authors Apte, Michael G., Michael Spears, Chi-Ming Lai, and Derek G. Shendell Conference Name Proceedings of Sustainable Buildings 2005 Conference Pagination 1432-1437 Conference Location Tokyo, Japan, September 27-29, 2005 Abstract The factory-built relocatable classroom (RC) is a dominant force in the school facility construction industry in the United States (U.S.) and elsewhere. It is estimated that there are approximately 650,000 RCs currently occupied in the U.S., housing about 16 million students. RCs receive public attention due to complaints about poor indoor environmental quality (IEQ). Both measured data and anecdotal evidence in California have suggested excessive acoustical noise from heating, ventilation, and air conditioning (HVAC) equipment as a central factor leading to degraded IEQ. In the U.S., RCs are typically equipped with unitary exterior wall-mount HVAC systems, and interior acoustical noise due to structural and airborne transmission can reach levels of about 58dB(A) with compressor cycling, under unoccupied conditions. Due to these noise levels teachers often simply choose to turn off the HVAC, leading to inadequate ventilation, as well as poor thermal conditioning, and thus to poor indoor air quality. Elevated levels of carbon dioxide and volatile organic compounds including formaldehyde are common. We discuss the acoustic component of our efforts to develop and test energy efficient HVAC systems that address the ventilation, controls, and acoustic requirements necessary to ensure high quality indoor environments in RCs

422

User-driven quality evaluation of DBpedia  

Science Conference Proceedings (OSTI)

Linked Open Data (LOD) comprises of an unprecedented volume of structured datasets on the Web. However, these datasets are of varying quality ranging from extensively curated datasets to crowdsourced and even extracted data of relatively low quality. ... Keywords: DBpedia, RDF, data quality, evaluation, extraction

Amrapali Zaveri, Dimitris Kontokostas, Mohamed A. Sherif, Lorenz Bühmann, Mohamed Morsey, Sören Auer, Jens Lehmann

2013-09-01T23:59:59.000Z

423

Remote Sensing for Water Quality Applications  

E-Print Network (OSTI)

Remote Sensing for Water Quality Applications #12;Objective Give a brief update on GEO Inland and Nearshore Coastal Water Quality Remote Sensing Workshop (GEO Work Task WA-06-01)) Held in Geneva and Nearshore Coastal Water Quality Remote Sensing Workshop (GEO Work Task WA-06-01)) Organizing committee

424

Southern Region Water Quality Coordination Project  

E-Print Network (OSTI)

Integrated Water Quality Program Impact Report was produced and distributed at the National Integrated Water Management, Irrigation Management, and Water Quality Education for Agricultural Producers. Programs under Management on Livestock and Poultry Farms. · The Water Quality Education for Agricultural Producers Program

425

Evaluating the Quality of Open Source Software  

Science Conference Proceedings (OSTI)

Traditionally, research on quality attributes was either kept under wraps within the organization that performed it, or carried out by outsiders using narrow, black-box techniques. The emergence of open source software has changed this picture allowing ... Keywords: open source, process quality attributes, product quality attributes, sqo-oss

Diomidis Spinellis; Georgios Gousios; Vassilios Karakoidas; Panagiotis Louridas; Paul J. Adams; Ioannis Samoladas; Ioannis Stamelos

2009-03-01T23:59:59.000Z

426

Research on chinese hydrological data quality management  

Science Conference Proceedings (OSTI)

Data quality has become increasingly important in information constructions and low data quality will influence the decision-making process related to design, operation, and management of hydrology application. Although many researches could be found ... Keywords: assessment, data quality, dimension, improvement

Yufeng Yu; Yuelong Zhu; Jianxin Zhang; Jingjin Jiang

2012-10-01T23:59:59.000Z

427

Sandia software guidelines: Software quality planning  

Science Conference Proceedings (OSTI)

This volume is one in a series of Sandia Software Guidelines intended for use in producing quality software within Sandia National Laboratories. In consonance with the IEEE Standard for Software Quality Assurance Plans, this volume identifies procedures to follow in producing a Software Quality Assurance Plan for an organization or a project, and provides an example project SQA plan. 2 figs., 4 tabs.

Not Available

1987-08-01T23:59:59.000Z

428

PBAC: Probe-Based Admission Control  

Science Conference Proceedings (OSTI)

Different end-to-end measurement based admission control (MBAC) schemes have recently been proposed to support quality of service for real-time data. All these designs share the idea of decentralizing the admission decision by requiring each end host ...

Ignacio Más Ivars; Gunnar Karlsson

2001-09-01T23:59:59.000Z

429

Heliostat control  

DOE Patents (OSTI)

An improvement in a system and method of controlling heliostat in which the heliostat is operable in azimuth and elevation by respective stepper motors and including the respective steps or means for calculating the position for the heliostat to be at a commanded position, determining the number of steps in azimuth and elevation for each respective motor to get to the commanded position and energizing both the azimuth and elevation stepper motors to run in parallel until predetermined number of steps away from the closest commanded position in azimuth and elevation so that the closest position has been achieved, and thereafter energizing only the remaining motor to bring it to its commanded position. In this way, the heliostat can be started from a stowed position in the morning and operated by a computer means to its commanded position and kept correctly oriented throughout the day using only the time of the day without requiring the usual sensors and feedback apparatus. A computer, or microprocessor, can then control a plurality of many heliostats easily and efficiently throughout the day.

Kaehler, James A. (Littleton, CO)

1984-01-01T23:59:59.000Z

430

Kansas Air Quality Regulations (Kansas)  

Energy.gov (U.S. Department of Energy (DOE))

All new air contaminant emission sources or alterations to emission sources that are required to be reported shall be in compliance with all applicable emission control regulations at the time that...

431

QualityAssurance&Testing  

NLE Websites -- All DOE Office Websites (Extended Search)

and Testing and Testing Manufacturing Technologies The Manufacturing Science & Technology Center provides customers with manufacturing quality requirements, testing standards and specifica- tions for new product designs, including the implementation of these requirements into final product acceptance complete with documenta- tion. Technical support and procedures are fur- nished for Interagency Product Acceptance. Capabilities * Will inspect printed circuit (PC) boards, wire wrap boards, boxes, chassis, cables, racks, systems, etc. * Work from sketches or formal drawings * Review drawings and requirements * Visual inspections for layout, markings, solder joints, components, mechanical assembly, general workmanship, safety * Point-to-point continuity checks

432

Groundwater Quality Standards (Nebraska) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Quality Standards (Nebraska) Quality Standards (Nebraska) Groundwater Quality Standards (Nebraska) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Nebraska Program Type Environmental Regulations Provider Environmental Quality These regulations, promulgated by the Department of Environmental Quality,

433

General Water Quality (Oklahoma) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

General Water Quality (Oklahoma) General Water Quality (Oklahoma) General Water Quality (Oklahoma) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Oklahoma Program Type Environmental Regulations Provider Environmental Quality The purpose of this water quality rule is to protect, maintain and improve

434

Texas Commission on Environmental Quality | Open Energy Information  

Open Energy Info (EERE)

Texas Commission on Environmental Quality Jump to: navigation, search Logo: Texas Commission on Environmental Quality Name Texas Commission on Environmental Quality Address 12100...

435

Lipid Oxidation and Quality Division April 2013 Newsletter  

Science Conference Proceedings (OSTI)

Read the Lipid Oxidation and Quality Division April 2013 Newsletter Lipid Oxidation and Quality Division April 2013 Newsletter Lipid Oxidation and Quality Division ...

436

Lipid Oxidation and Quality Division July 201/span>3 Newsletter  

Science Conference Proceedings (OSTI)

Read the Lipid Oxidation and Quality Division July 201/span>3 Newsletter Lipid Oxidation and Quality Division July 201/span>3 Newsletter Lipid Oxidation and Quality Division ...

437

Quality Assurance Corporate Board | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Quality Assurance » Quality Quality Assurance » Quality Assurance Corporate Board Quality Assurance Corporate Board The Office of Environmental Management (EM) Quality Assurance Corporate Board is an executive board that includes both senior U.S. Department of Energy (DOE) and contractor representatives who are involved with construction, operating, and decommissioning projects. The Board acts in an advisory capacity to the EM Deputy Assistant Secretary for the Safety and Security Program, who is the Chief Executive Officer and Chair of the Board. Decisions on the Corporate Board's recommendations are acted on by EM senior management. The Corporate Board provides the management structure to integrate the independently managed federal and contractor Quality Assurance Programs into a single corporate entity. The Board serves as a consensus-building

438

EM Quality Assurance Policy, Revision 0  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Office of Environmental Management Corporate Quality Policy Office of Environmental Management Corporate Quality Policy The Office of Environmental Management recognizes that individuals performing work determine whether it is done correctly in accordance with all requirements and therefore achieves quality. Although "do work safely" is our first priority, we understand it is also essential to "do work correctly" or both safety and quality are jeopardized. While plans, procedures, and instructions are commonly understood elements of any quality program, people make quality happen and allow us to deliver on our commitments. As the Assistant Secretary for Environmental Management (EM), I am responsible to achieve quality within my organization. It is EM policy that doing work correctly is not

439

Quality Assurance Exchange, September 2005  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 2 S e p t e m b e r 2 0 0 5 I N T H E S P O T L I G H T : I N T E R V I E W W I T H C H I P L A G D O N A C T I N G C H I E F O F N U C L E A R S A F E T Y E N E R G Y , S C I E N C E A N D E N V I R O N M E N T I N S I D E T H I S I S S U E : In the Spotlight: Interview with Chip Lagdon, acting CENS 1 Lessons Learned from SQA Assessments 2 SQA Work Activity 1-Software Project Manage- ment & Quality Planning & ASME NQA-1-2000 3 Announcements, Updates, and Activities 7 DOE Order 414.1C Rollout 1 Upcoming Meetings &Workshops 8 S/CI Items Video Conference 6 Q U A L I T Y A S S U R A N C E E X C H A N G E DOE ORDER 414.1C ROLLOUT The Quality Assurance Order Rollout Video Conferences were held July 25 th and August 4 th , 2005, at the DOE For- restal Building, Washington, D.C. Over 20 DOE sites nationwide participated in the video conferences. The primary

440

Quality Assurance Exchange, October 2008  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4 4 , I s s u e 2 O c t o b e r 2 0 0 8 I N S I D E T H I S I S S U E : In the Spotlight: Larry Newman, Director of the Office of Quality Assurance, OCRWM 1 SQA Work Activity: Personnel Training in Design, Development, Use & Evaluation of Safety Software 4 Safety Bulletin: Quality Assurance Concern Wright Industries, Inc. 5 HSS QA Activity Corner 6 Just for Fun 7 QA-Related Meetings & Conferences 8 Director's Note 8 Q U A L I T Y A S S U R A N C E E X C H A N G E Mr. Larry Newman has broad experience in managing nuclear reactors and power plants, both in the government and the private sec- tor. He has over 20 years' experience in the civilian nuclear field. He has worked at nu- merous civilian nuclear power reactors, where he has twice been a Nuclear Regula- tory Commission (NRC)-licensed senior re-

Note: This page contains sample records for the topic "qc quality control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

National Coal Quality Inventory (NACQI)  

Science Conference Proceedings (OSTI)

The U.S. Geological Survey (USGS) conducted the National Coal Quality Inventory (NaCQI) between 1999 and 2005 to address a need for quality information on coals that will be mined during the next 20-30 years. Collaboration between the USGS, State geological surveys, universities, coal burning utilities, and the coal mining industry plus funding support from the Electric Power Research Institute (EPRI) and the U.S. Department of Energy (DOE) permitted collection and submittal of coal samples for analysis. The chemical data (proximate and ultimate analyses; major, minor and trace element concentrations) for 729 samples of raw or prepared coal, coal associated shale, and coal combustion products (fly ash, hopper ash, bottom ash and gypsum) from nine coal producing States are included. In addition, the project identified a new coal reference analytical standard, to be designated CWE-1 (West Elk Mine, Gunnison County, Colorado) that is a high-volatile-B or high-volatile-A bituminous coal with low contents of ash yield and sulfur, and very low, but detectable contents of chlorine, mercury and other trace elements.

Robert Finkelman

2005-09-30T23:59:59.000Z

442

Air Resources: Prevention and Control of Air Contamination and Air  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Air Resources: Prevention and Control of Air Contamination and Air Air Resources: Prevention and Control of Air Contamination and Air Pollution, Air Quality Classifications and Standards, and Air Quality Area Classifications (New York) Air Resources: Prevention and Control of Air Contamination and Air Pollution, Air Quality Classifications and Standards, and Air Quality Area Classifications (New York) < Back Eligibility Agricultural Fuel Distributor Industrial Institutional Investor-Owned Utility Local Government Multi-Family Residential Municipal/Public Utility Nonprofit Rural Electric Cooperative Schools State/Provincial Govt Transportation Tribal Government Utility Program Info State New York Program Type Environmental Regulations Provider NY Department of Environmental Conservation These regulations establish emissions limits and permitting and operational

443

Power Quality and Energy Measurement System Independent Evaluation Center: Workshop Presentation Materials  

Science Conference Proceedings (OSTI)

In 2001, EPRI opened its Advanced Power Quality Monitoring Laboratory (APQML) in Knoxville, Tennessee. The intent of this lab is to allow EPRI member utilities to gain access to a test facility that was specifically designed to test power quality monitors. The APQML has the ability to test any power quality monitoring instrument. The lab is not limited to hardware testing; it can also test the software required to control, monitor, and analyze the data recorded by the monitor. In 2002, the deliverables f...

2003-02-19T23:59:59.000Z

444

Independent Specific Administrative Controls Review, Richland Operations  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Independent Specific Administrative Controls Review, Richland Independent Specific Administrative Controls Review, Richland Operations Office - December 2010 Independent Specific Administrative Controls Review, Richland Operations Office - December 2010 December 2010 Specific Administrative Controls Review with the Office of Environmental Management at DOE-Richland Operations Office The U.S. Department of Energy (DOE) Office of Independent Oversight, within the Office of Health, Safety and Security, participated in the Office of Environmental Management Office of Standards and Quality Assurance, EM-23, review of Specific Administrative Controls (SAC) at the Hanford Site. The EM-23 review included selected programs at the Hanford Site that are under the auspices of the DOE Richland Operations Office. Independent Specific Administrative Controls Review, Richland Operations

445

Interphase power controller with voltage injection  

Science Conference Proceedings (OSTI)

This paper introduces a new family of Interphase Power Controllers (IPC) based on the principle of voltage injection commonly used in phase-shifting transformers (PST). The voltage injection IPC exhibits power (active and reactive) control characteristics similar to previously defined IPC's and retains their inherent qualities: passive control, short circuit limitation and voltage decoupling. It also provides more flexibility for the adjustment of the operating points. Two promising topologies are described in more detail. One of them offers the potential of retrofitting existing phase-shifting transformers into full-fledged IPC's.

Beauregard, F.; Brochu, J.; Morin, G.; Pelletier, P. (Centre d'Innovation sur le Transport d'Energie du Quebec, Varennes, Quebec (Canada))

1994-10-01T23:59:59.000Z

446

Fuzzy control of steam turbines  

Science Conference Proceedings (OSTI)

Keywords: PID control, comparison of PID and fuzzy control, fuzzy logic control, robustness, speed control, steam turbine control

N. Kiupel; P. M. Frank; O. Bux

1994-05-01T23:59:59.000Z

447

Air quality in tightly sealed and passive homes  

DOE Green Energy (OSTI)

Indoor air quality has attracted increasing attention during the past few yars. Pollutants generated from combustion, building materials, and human activities may reach significant levels in the indoor environment to produce adverse health effects. This report deals with the classes of pollutants and their sources, and the significance of reported levels, possible health effects, and control strategies in relation to tightly sealed and passive solar construction techniques. In tightly sealed homes, residential air-to-air heat exchangers, whose design and performance are discussed, offer one method of improving air quality at reasonable cost. It is recommended that further research be implemented to identify hazardous concentrations of pollutants and set standards to minimize health impacts in the search for new energy innovations.

Scott, L.A.

1981-09-01T23:59:59.000Z

448

AIR QUALITY: MERCURY, TRACE ELEMENTS, AND PARTICULATE MATTER CONFERENCE  

SciTech Connect

This final report summarizes the planning/preparation, facilitation, and outcome of the conference entitled ''Air Quality: Mercury, Trace Elements, and Particulate Matter'' that was held December 1-4, 1998, in McLean, Virginia (on the outskirts of Washington, DC). The goal of the conference was to bring together industry, government, and the research community to discuss the critical issue of how air quality can impact human health and the ecosystem, specifically hazardous air pollutants and fine airborne particles; available and developing control technologies; strategies and research needs; and an update on federal and state policy and regulations, related implementation issues, and the framework of the future.

John H. Pavlish; Steven A. Benson

1999-07-01T23:59:59.000Z

449

Environmental Restoration Quality Program Implementation Plan. Environmental Restoration Program  

SciTech Connect

The Environmental Restoration (ER) Program requirements for implementation of DOE Order 5700.6C are identified in the Environmental Restoration Quality Program Plan, (QPP). Management systems necessary to implement the ER QPP consist of the necessary standards and procedures required to be developed to adequately control ER processes. To the extent possible, Martin Marietta Energy Systems, Inc., standards and procedures will be utilized at the ER Program level, and requirements will not be repeated. The quality management systems identified for enhancement or development are identified in the section on Procedure Development Strategy and directly relate to unique ER Program activities. Procedures and standards that currently exist in the ER Program will be validated for compliance with ER QPP requirements.

1992-08-01T23:59:59.000Z

450

Controlled Synthesis  

NLE Websites -- All DOE Office Websites (Extended Search)

lUU lUU iIII---11111 q o m Controlled Synthesis of Polyenes by Catalytic Methods Progress Report for the period 12/01/92 - 11/30/93 Richard R. Schrock Five papers have appeared in the last year (see list at end), numbers 225,229, 233, 236, and 240. The living cyclopolymerization of dipropargyl derivatives has been reported for diethyl dipropargylmalonate (X = C(CO2Et)2; Scheme I; #225). We have found that c_ addition and [3 addition take place approximately to an equivalent degree, on the basis of the 13C NMR chemical shift for the quaternary carbon atom in the five or si×-membered ring, and in the presence of ethylene have isolated a molecule that contains a si×-membered ring that is formed when ethylene cleaves the cyclized species from the metal in a chain transfer-like reaction. On this basis also we can say that the polymer prepared from this monomer using classical catalysts contain

451

Quality Assurance Exchange, March 2006  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 2 , I ssu e 1 M a r c h 2 0 0 6 I N S I D E T H I S I S S U E : In the Spotlight: Interview with Patrice Bubar, DAS for Office of Corporate Performance 1 "How To" Series on Performing Assessments: Auditing Tools & Techniques 1 Lessons Learned: Quality Assurance Related to Fastener Torque Requirements 2 Washington Closure Hanford Safety Software Surveillance Completed 3 Announcements, Updates, & Activities 8 Upcoming Workshops, Training, & Courses 10 Upcoming Meetings & Conferences 9 Q U A L I T Y A S S U R A N C E E X C H A N G E Earlier this year, Patrice M. Bubar was appointed as the Deputy Assistant Secre- tary for Corporate Performance Assess- ment (EH-3) within the Office of Environ- ment, Safety and Health (EH). Ms. Bubar

452

Quality Assurance Exchange, Winter 2010  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

new year brings new challenges new year brings new challenges for DOE and the Office of Environmental Management (EM) is no exception, especially with the acceleration and revamping of projects due to the American Recovery and Reinvestment Act (ARRA). A recent reorganization which has restructured EM senior leadership by adding new positions and changing reporting lines for many EM offices has brought about new objectives and challenges. In an effort to understand these changes and expectations, we spoke with Robert Murray, Acting Director of the Office of Standards and Quality Assurance (EM-23) within the Office of Safety and Security Program. In the following interview, Mr. Murray discusses the changes, challenges, and objectives for EM-23 in FY 2010. (Continued on page 2)

453

COST AND QUALITY TABLES 95  

Gasoline and Diesel Fuel Update (EIA)

5 Tables 5 Tables July 1996 Energy Information Administration Office of Coal, Nuclear, Electric and Alternate Fuels U.S. Department of Energy Washington DC 20585 This report was prepared by the Energy Information Administration, the independent statistical and analytical agency within the Department of Energy. The information contained herein should not be construed as advocating or reflecting any policy position of the Department of Energy or any other organization. Contacts The annual publication Cost and Quality of Fuels for Electric Utility Plants (C&Q) will no longer be pub- lished by the EIA. The tables presented in this docu- ment are intended to replace that annual publication. Questions regarding the availability of these data should be directed to: Coal and Electric Data and Renewables Division

454

Quality Assurance Exchange, August 2009  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

American Recovery and American Recovery and Reinvestment Act (ARRA) of 2009 (Public Law 111-5), also called stimulus package and referred to as the Recovery Act, is an economic stimulus package enacted by the 111th United States Congress and signed into law by President Barack Obama on February 17, 2009. The Recovery Act is intended to provide a stimulus to the U.S. economy in the wake of the economic downturn. The measures are nominally worth $787 billion nationwide and include federal tax cuts, expansion of unemployment benefits and other social welfare provisions, and domestic spending in education, health care, and infrastructure, including the energy sector. IN THE SPOTLIGHT: OFFICE OF NUCLEAR SAFETY, QUALITY ASSURANCE AND ENVIRONMENT Interview with Andrew C. Lawrence, Director

455

Board Staff Perspectives Quality Council  

NLE Websites -- All DOE Office Websites (Extended Search)

Nuclear Facilities Safety Nuclear Facilities Safety Board Th B d & T h i l S ff Q li A The Board & Technical Staff Quality Assurance Perspectives for 2011 2010 Dr. W. San Horton, PMP, CSQE Member of the Technical Staff Defense Nuclear Facilities Safety Board DISCLAIMER The ie s and opinions presented are solel the a thor's No information contained in the presentation nor an associated The views and opinions presented are solely the author's. No information contained in the presentation nor any associated discussion should be construed as official or unofficial views or positions of the Defense Nuclear Facilities Safety Board Defense Nuclear Facilities Safety Board T i Topics B i I f ti B d * Basic Information on Board * Who, what, mission, size, location * Organization of the Board and the Board's staff

456

CRAD, Work Controls Assessment Plan | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Work Controls Assessment Plan Work Controls Assessment Plan CRAD, Work Controls Assessment Plan Performance Objective: Management should have an established work control process in place with authorized, controlled and documented methods that provide an accurate status of the work to be performed. Criteria: Work planning addresses applicable laws, codes and regulations. Work planning includes operational configuration constraints; material, tool, and manpower requirements; inter-organizational coordination; operational history; special training; safety considerations; hazards protection requirements; post-maintenance testing; quality control requirements; and other considerations as necessary. The work to be accomplished is defined by identifying the existing deficiency and condition; prescribing appropriate approvals; and including

457

Lighting Group: Controls: Advanced Digital Controls  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Digital Controls Advanced Digital Controls HPCBS Advanced Digital Controls Objective The goal of this project is to hasten the adoption of digital lighting control systems to allow commercial building operators to optimize the neergy performance of their lighting systems, implement demand responsive control, and improve occupant comfort and productivity. The specific objectives are as follows: (1) Advance the adoption of digital lighting control systems by working with industry to embed IBECS technology into existing analog control and DALI products, and by developing compelling demonstrations of digital control systems for evaluation by early adopters. (2) In collaboration with equipment manufacturers, produce digital lighting system prototypes that demonstrate the advantages of digitally controlled lighting systems to innovative property managers and other energy stakeholders. A digitally controlled lighting system consists of lights that are individually controllable via a network. The advantages of digital control are:

458

On the Gravitational Energy Associated with Spacetimes of Diagonal Metric  

E-Print Network (OSTI)

This paper also has excessive overlap with the following papers also written by the authors or their collaborators: gr-qc/0608014, gr-qc/0511095, gr-qc/0505078, gr-qc/0502060, gr-qc/0603027, gr-qc/0606028, gr-qc/0607109, gr-qc/0607110, gr-qc/0508018, gr-qc/0502031, and others.

Murat Korunur; Ali Havare; Mustafa Salti

2006-03-13T23:59:59.000Z

459

Moller Energy-Momentum Prescription for a Locally Rotationally Symmetric Space-Time  

E-Print Network (OSTI)

This paper has inappropriate amounts of overlap with the following papers also written by the authors or their collaborators: gr-qc/0608050, gr-qc/0509047, gr-qc/0505078, gr-qc/0603108, gr-qc/0512080, gr-qc/0511030, gr-qc/0606022, gr-qc/0603027, gr-qc/0603063, gr-qc/0607116, and others.

Oktay Aydogdu

2006-01-17T23:59:59.000Z

460

Surface Water Quality Standards (Kansas) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Quality Standards (Kansas) Surface Water Quality Standards (Kansas) Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General PublicConsumer...

Note: This page contains sample records for the topic "qc quality control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Princeton Plasma Physics Lab - Quality assurance  

NLE Websites -- All DOE Office Websites (Extended Search)

quality-assurance Quality: the quality-assurance Quality: the characteristics of a product or service that bear on its ability to satisfy stated or implied needs.Quality Assurance: the planned and systematic activities implemented to provide confidence that a product or service will fulfill its requirements for quality. en PPPL teams up with USDA to produce new egg pasteurization method http://www.pppl.gov/news/press-releases/2013/09/pppl-teams-usda-produce-new-egg-pasteurization-method

Researchers at the Princeton Plasma Physics Laboratory (PPPL) and the U.S. Department of Agriculture (USDA) have developed a novel technique

462

SOPP-43, EM-23 Quality Assurance Oversight  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

. POLICY: The Office of Environmental Management (EM) Quality Assurance program . POLICY: The Office of Environmental Management (EM) Quality Assurance program requirements and expectations are documented in the EM Quality Assurance Program (QAP), EM-QA-001, dated October 2008. The QAP is the EM management system to ensure that all EM organizations "do work correctly." The QAP meets the requirements of DOE O 414.1C, Quality Assurance, and 10 CFR 830 Subpart A "Quality Assurance Requirements." The QAP demonstrates how QA and the Integrated Safety Management System (ISMS) are fully integrated in EM. The QAP also provides consistent QA implementation across EM while allowing both for grading based on importance to the EM mission and safety, and for site-specific requirements to be addressed (e.g., DOE/RW-0333P, Quality Assurance

463

State Water Quality (Virginia) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Quality (Virginia) Quality (Virginia) State Water Quality (Virginia) < Back Eligibility Commercial Construction Industrial Investor-Owned Utility Local Government Municipal/Public Utility Rural Electric Cooperative Systems Integrator Tribal Government Utility Savings Category Water Buying & Making Electricity Home Weatherization Program Info State Virginia Program Type Environmental Regulations Siting and Permitting Provider Virginia Department of Environmental Quality It is the policy of the Commonwealth of Virginia to: (1) protect existing high quality state waters and restore the quality of all other state waters to permit all reasonable public uses and support the propagation and growth of all aquatic life which might reasonably be expected to inhabit them; (2) safeguard the clean waters of the Commonwealth from pollution; (3) prevent

464

Process-Based Quality (PBQ) Tools Development  

SciTech Connect

The objective of this effort is to benchmark the development of process-based quality tools for application in CAD (computer-aided design) model-based applications. The processes of interest are design, manufacturing, and quality process applications. A study was commissioned addressing the impact, current technologies, and known problem areas in application of 3D MCAD (3-dimensional mechanical computer-aided design) models and model integrity on downstream manufacturing and quality processes. The downstream manufacturing and product quality processes are profoundly influenced and dependent on model quality and modeling process integrity. The goal is to illustrate and expedite the modeling and downstream model-based technologies for available or conceptual methods and tools to achieve maximum economic advantage and advance process-based quality concepts.

Cummins, J.L.

2001-12-03T23:59:59.000Z

465

Toward machine understanding of information quality  

E-Print Network (OSTI)

In this paper we report preliminary results of a study to develop, and subsequently to automate, new metrics for assessment of information quality in text documents, particularly in news. Through focus group studies, quality judgment experiments, and textual feature extraction and analysis, we were able to generate nine quality aspects and apply them in human assessments. Experts and students participated quality experiments, during which 1000 TREC documents were evaluated by participants from two sites--Albany and Rutgers. Data showed good interjudge agreement between judges from both sites. Principal component analysis revealed that the nine aspects form clusters of “content ” and “presentation. ” Automatic quality prediction has been derived based on statistical analysis on the association between textual features and human quality judgments.

Rong Tang; K. B. Ng; Tomek Strzal Kowski; Paul Kantor

2003-01-01T23:59:59.000Z

466

Quality assurance | Princeton Plasma Physics Lab  

NLE Websites -- All DOE Office Websites (Extended Search)

Quality assurance Quality assurance Subscribe to RSS - Quality assurance Quality: the characteristics of a product or service that bear on its ability to satisfy stated or implied needs. Quality Assurance: the planned and systematic activities implemented to provide confidence that a product or service will fulfill its requirements for quality. PPPL teams up with USDA to produce new egg pasteurization method Researchers at the Princeton Plasma Physics Laboratory (PPPL) and the U.S. Department of Agriculture (USDA) have developed a novel technique and device for rapidly pasteurizing eggs in the shell without damaging the delicate egg white. The process could lead to a sharp reduction in illnesses caused by egg-borne salmonella bacteria, a widespread public health concern.

467

Council on Environmental Quality | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Council on Environmental Quality Council on Environmental Quality Council on Environmental Quality Selected documents prepared by the Council on Environmental Quality that provide guidance on the NEPA process. March 5, 2013 NEPA and CEQA: Integrating State and Federal Environmental Reviews (Draft) The Council on Environmental Quality (CEQ), in collaboration with the California Governor's Office of Planning and Research, issued on March 5, 2013, a draft handbook on integrating NEPA and California Environmental Quality Act (CEQA) review processes. The guide provides practitioners with an overview of NEPA and CEQA as well as valuable suggestions for developing a single environmental review process that can meet the requirements of both statutes. March 5, 2013 NEPA and NHPA: A Handbook for Integrating NEPA and Section 106

468

Robotics Control using Active Disturbance Rejection Control.  

E-Print Network (OSTI)

??Conventional robotics control has been set in stone since the sixties. The world has been waiting too long for a new age of control to… (more)

Khairallah, Ousama Said

2009-01-01T23:59:59.000Z

469

Unclassified Controlled Nuclear Information Document Markings: A Brief Summary  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Unclassified Controlled Nuclear Unclassified Controlled Nuclear Information (UCNI) Document Markings: A Brief Summary U.S. Department of Energy Classification Training Institute Office of Quality Management Office of Classification Office of Health, Safety and Security November 2011 Unclassified Controlled Nuclear Information (UCNI) Document Markings: A Brief Summary Prepared by: Office of Quality Management Office of Classification U.S. Department of Energy 1000 Independence Avenue, SW. Washington, D.C. 20585-1290 U C N I This document contains UCNI. How do I mark it? Do I need additional markings if it contains OUO? Table of Contents Marking UCNI Documents and Material .................................................... 1

470

Water Control and Improvement Districts (Texas) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Water Control and Improvement Districts (Texas) Water Control and Improvement Districts (Texas) Water Control and Improvement Districts (Texas) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Savings Category Water Buying & Making Electricity Home Weatherization Solar Wind Program Info State Texas Program Type Environmental Regulations Provider Texas Commission on Environmental Quality The Texas Commission on Environmental Quality is authorized to review and

471

Water Quality Criteria Development for Iron  

Science Conference Proceedings (OSTI)

The current national water quality criterion for iron — a criterion continuous concentration of 1 mg Fe/L — was derived 25 years ago. Such ambient water quality criteria are typically derived from toxicity tests in which the reagent grade chemical is dissolved in clean laboratory water. However, due to the complexity of iron speciation in freshwater, adverse effects of iron precipitates on habitat quality, and access of organisms to food, standard toxicity assays may not adequately assess the...

2004-12-27T23:59:59.000Z

472

Power Quality Improvement Methodology for Wires Companies  

Science Conference Proceedings (OSTI)

This report provides practical utility-side strategies for improving power quality. Much research has been done on the application of custom power devices to mitigate power quality events on transmission and distribution wires systems. However, these solutions can be costly and often benefit a limited number of customers. Many wires companies are looking for ways to improve the overall quality of their service using methods and equipment that are more traditional.

2003-02-11T23:59:59.000Z

473

Surveillance Guides - QAS 2.5 Design Control  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DESIGN CONTROL DESIGN CONTROL 1.0 Objective The objective of this surveillance is to evaluate the effectiveness of the contractor's design control program. The surveillance encompasses design input, design output, and design control. The Facility Representatives will evaluate implementation of the program as well as compliance with applicable DOE requirements. 2.0 References 2.1 DOE 5700.6C, Quality Assurance 2.2 10 CFR Part 50, Appendix B, Quality Assurance Criteria for Nuclear Power Plants and Fuel Reprocessing Plants. 2.3 NQA-1-1989, Quality Assurance Program Requirements for Nuclear Facilities 3.0 Requirements Implemented This surveillance is conducted to implement requirement QA-0009 from the RL S/RID. This requirement is extracted from DOE 5700.6C.

474

Environmental Quality (Nebraska) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Quality (Nebraska) Quality (Nebraska) Environmental Quality (Nebraska) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Nebraska Program Type Environmental Regulations Provider Environmental Quality This section establishes the policy of the state to be the conservation,

475

Ambient Air Quality Standards (New Jersey)  

Energy.gov (U.S. Department of Energy (DOE))

This article lists specific standards for ambient air quality standards for particulate matter, sulfur dioxide, carbon monoxide, ozone, lead and nitrogen dioxide.

476

Office of Quality Assurance - Mission and Functions  

NLE Websites -- All DOE Office Websites (Extended Search)

Serves as the office of primary interest for QA policies, guidance and other QA directives. Develops and revises QA and software quality assurance (SQA) directives and...

477

Water Quality Standards (Iowa) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Iowa) Water Quality Standards (Iowa) Eligibility Agricultural Commercial Construction Fuel Distributor Industrial InstallerContractor Institutional Investor-Owned Utility Local...

478

EM Quality Assurance Assessment Schedule FY 2010  

Energy.gov (U.S. Department of Energy (DOE))

Attached for planning and coordination purposes is the updated Quality Assurance (QA) assessment schedule for the remainder of fiscal year (FY) 2010.

479

Indoor Air Quality and Volatile Organic Compounds  

Science Conference Proceedings (OSTI)

... The unit was sized to comply with the outdoor air requirements in ASHRAE Standard 62.2 Ventilation and Acceptable Indoor Air Quality in Low ...

2013-03-12T23:59:59.000Z

480

Discussion of “Rural Alaska Electric Power Quality”  

Science Conference Proceedings (OSTI)

... Poor electric power quality has repeatedly been blamed for electrical equipment malfunction and failures, even though data to substantiate this view ...

2013-05-17T23:59:59.000Z

Note: This page contains sample records for the topic "qc quality control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Instruction for quality service: a curricular unit.  

E-Print Network (OSTI)

??The purpose of this project was to design an in depth and inclusive curricular unit for quality food service to accommodate an emergent industry. It… (more)

Miltenberger, Lucia A.

482

Final Information Quality Bulletin for Peer Review  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

04 OFFICE OF MANAGEMENT AND BUDGET Final Information Quality Bulletin for Peer Review INTRODUCTION This Bulletin establishes that important scientific information shall be peer...

483

Factors that Predict Quality Classroom Technology Use.  

E-Print Network (OSTI)

??Despite technological advancements intended to enhance teaching and learning in the 21st century, numerous teacher and school factors continue to impede quality classroom technology use.… (more)

Hastings, Tricia A.

2009-01-01T23:59:59.000Z

484

Microbial quality and safety of ostrich meat.  

E-Print Network (OSTI)

??The aim of this study was to determine the quality of slaughtered ostrich meat and to evaluate the ostrich slaughter process, to determine whether ostrich… (more)

Cloete, Anya

2010-01-01T23:59:59.000Z

485

Indoor Air Quality & Ventilation Group Staff Directory  

Science Conference Proceedings (OSTI)

Indoor Air Quality and Ventilation Group Staff. Staff Listing. Dr. Andrew K. Persily, Leader, Supervisory Mechanical Engineer, 301-975-6418. ...

2013-08-30T23:59:59.000Z

486

FAQS Reference Guide – Weapon Quality Assurance  

Energy.gov (U.S. Department of Energy (DOE))

This reference guide addresses the competency statements in the August 2008 edition of DOE-STD-1025-2008, Weapon Quality Assurance Functional Area Qualification Standard.

487

Processing parameters affecting sorghum noodle qualities.  

E-Print Network (OSTI)

??Processing variables of 100% sorghum noodles were investigated to determine effects on noodle quality. A dough was created by microwave heating a flour with 1… (more)

Kunetz, Christine Frances

2012-01-01T23:59:59.000Z

488

Rural Electrification with Renewable Energy: Technologies, quality...  

Open Energy Info (EERE)

launched their most recent publication: Rural Electrification with Renewable Energy: Technologies, Quality Standards and Business Models. Taping into its members' experience...

489

Computer/Controller 1588  

Science Conference Proceedings (OSTI)

... Computer/Controller? What is a computer or controller? ... Computer/controllers in a system supporting IEEE 1588 will typically include a 1588 clock. ...

2010-10-29T23:59:59.000Z

490

IMPACTS OF SAFETY & QUALITY IN ENVIRONMENTAL RESTORATION AT HANFORD  

Science Conference Proceedings (OSTI)

The aim of this paper is to demonstrate the integration of safety methodology, quality tools, leadership, and teamwork at Hanford and their significant positive impact on safe performance of work. Control charts, Pareto Charts, Dr. W. Edward Deming's Red Bead Experiment, and Dr. Deming's System of Profound Knowledge have been the principal tools and theory of an integrated management system. Coupled with involved leadership and teamwork they have led to significant improvements in worker safety and protection, and environmental restoration at one of the nation's largest nuclear cleanup sites.

PREVETTE, S.S.

2004-07-26T23:59:59.000Z

491

Demand Controlled Ventilation and Classroom Ventilation  

NLE Websites -- All DOE Office Websites (Extended Search)

3 3 Authors Fisk, William J., Mark J. Mendell, Molly Davies, Ekaterina Eliseeva, David Faulkner, Tienzen Hong, and Douglas P. Sullivan Publisher Lawrence Berkeley National Laboratory City Berkeley Keywords absence, building s, carbon dioxide, demand - controlled ventilation, energy, indoor air quality, schools, ventilation Abstract This document summarizes a research effort on demand controlled ventilation and classroom ventilation. The research on demand controlled ventilation included field studies and building energy modeling. Major findings included:  The single-location carbon dioxide sensors widely used for demand controlled ventilation frequently have large errors and will fail to effectively control ventilation rates (VRs).  Multi-location carbon dioxide measurement systems with more expensive sensors connected to multi-location sampling systems may measure carbon dioxide more accurately.

492

Strong Analytic Controllability for Hydrogen Control Systems  

E-Print Network (OSTI)

The realization and representation of so(4,2) associated with the hydrogen atom Hamiltonian are derived. By choosing operators from the realization of so(4,2) as interacting Hamiltonians, a hydrogen atom control system is constructed, and it is proved that this control system is strongly analytically controllable based on a time-dependent strong analytic controllability theorem.

Chunhua Lan; Tzyh-Jong Tarn; Quo-Shin Chi; John W. Clark

2004-09-22T23:59:59.000Z

493

Highly Integrated Quality Assurance – An Empirical Case  

SciTech Connect

Highly Integrated Quality Assurance – An Empirical Case Drake Kirkham1, Amy Powell2, Lucas Rich3 1Quality Manager, Radioisotope Power Systems (RPS) Program, Idaho National Laboratory, P.O. Box 1625 M/S 6122, Idaho Falls, ID 83415-6122 2Quality Engineer, RPS Program, Idaho National Laboratory 3Quality Engineer, RPS Program, Idaho National Laboratory Contact: Voice: (208) 533-7550 Email: Drake.Kirkham@inl.gov Abstract. The Radioisotope Power Systems Program of the Idaho National Laboratory makes an empirical case for a highly integrated Quality Assurance function pertaining to the preparation, assembly, testing, storage and transportation of 238Pu fueled radioisotope thermoelectric generators. Case data represents multiple campaigns including the Pluto/New Horizons mission, the Mars Science Laboratory mission in progress, and other related projects. Traditional Quality Assurance models would attempt to reduce cost by minimizing the role of dedicated Quality Assurance personnel in favor of either functional tasking or peer-based implementations. Highly integrated Quality Assurance adds value by placing trained quality inspectors on the production floor side-by-side with nuclear facility operators to enhance team dynamics, reduce inspection wait time, and provide for immediate, independent feedback. Value is also added by maintaining dedicated Quality Engineers to provide for rapid identification and resolution of corrective action, enhanced and expedited supply chain interfaces, improved bonded storage capabilities, and technical resources for requirements management including data package development and Certificates of Inspection. A broad examination of cost-benefit indicates highly integrated Quality Assurance can reduce cost through the mitigation of risk and reducing administrative burden thereby allowing engineers to be engineers, nuclear operators to be nuclear operators, and the cross-functional team to operate more efficiently. Applicability of this case extends to any high-value, long-term project where traceability and accountability are determining factors.

Drake Kirkham; Amy Powell; Lucas Rich

2011-02-01T23:59:59.000Z

494

Quality at Y-12, part 3 -- Or: Quality goes beyond nuclear weapons...  

NLE Websites -- All DOE Office Websites (Extended Search)

at Y-12, part 3 Or: Quality goes beyond nuclear weapons (title as it appeared in The Oak Ridger) As we continue our look at the history of Quality at Y-12, Bud Leete, Y-12...

495

Safety Software Quality Assurance: Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Training Training classroom DOE is committed to provide qualified staff to assist, guide, direct, oversee and evaluate its safety software. The Department's Safety Software Quality Assurance Functional Area Qualification Standard (FAQS) establishes common functional area competency requirements for its personnel. Additionally, specific Office/Facility-Specific Qualification Standard supplements the technical FAQS and establishes unique operational competency requirements. DOE O 426.1, Federal Technical Capability defines the requirements and responsibilities for developing a technically competent workforce to accomplish DOE missions in a safe and efficient manner through the Federal Technical Capability Program (FTCP). This accomplished through the Technical Qualification Program (TQP) which applies to DOE technical employess whose duties and responsibilities require them to provide assistance, guidance, direction, or oversight that could affect the safe operation of a defense nuclear facility, including evaluation of contractor activities at those facilities. The TQP, along with the supporting technical Functional Area Qualification Standards, complements the personnel processes that support DOE's drive for technical excellence. Detailed operating requirements for the TQP and Functional Area Qualification Standards are described in DOE M 426.1-1.

496

Advanced Emissions Control Development Program  

Science Conference Proceedings (OSTI)

McDermott Technology, Inc. (MTI) is conducting a five-year project aimed at the development of practical, cost-effective strategies for reducing the emissions of hazardous air pollutants (commonly called air toxics) from coal-fired electric utility plants. The need for air toxic emissions controls may arise as the U. S. Environmental Protection Agency proceeds with implementation of Title III of the Clean Air Act Amendment (CAAA) of 1990. Data generated during the program will provide utilities with the technical and economic information necessary to reliably evaluate various air toxics emissions compliance options such as fuel switching, coal cleaning, and flue gas treatment. The development work is being carried out using the Clean Environment Development Facility (CEDF) wherein air toxics emissions control strategies can be developed under controlled conditions, and with proven predictability to commercial systems. Tests conducted in the CEDF provide high quality, repeatable, comparable data over a wide range of coal properties, operating conditions, and emissions control systems. Development work to date has concentrated on the capture of mercury, other trace metals, fine particulate, and hydrogen chloride and hydrogen fluoride.

M. J. Holmes

1998-12-03T23:59:59.000Z

497

Advanced Emissions Control Development Program  

Science Conference Proceedings (OSTI)

McDermott Technology, Inc. (MTI) is conducting a five-year project aimed at the development of practical, cost-effective strategies for reducing the emissions of hazardous air pollutants (commonly called air toxics) from coal-fired electric utility plants. The need for air toxic emissions controls may arise as the U. S. Environmental Protection Agency proceeds with implementation of Title III of the Clean Air Act Amendment (CAAA) of 1990. Data generated during the program will provide utilities with the technical and economic information necessary to reliably evaluate various air toxics emissions compliance options such as fuel switching, coal cleaning, and flue gas treatment. The development work is being carried out using the Clean Environment Development Facility (CEDF) wherein air toxics emissions control strategies can be developed under controlled conditions, and with proven predictability to commercial systems. Tests conducted in the CEDF provide high quality, repeatable, comparable data over a wide range of coal properties, operating conditions, and emissions control systems. Development work to date has concentrated on the capture of mercury, other trace metals, fine particulate, and the inorganic species, hydrogen chloride and hydrogen fluoride.

A. P. Evans

1998-12-03T23:59:59.000Z

498

Advanced Emissions Control Development Program  

Science Conference Proceedings (OSTI)

Babcock & Wilcox (B&W) is conducting a five-year project aimed at the development of practical, cost-effective strategies for reducing the emissions of hazardous air pollutants (commonly called air toxics) from coal-fired electric utility plants. The need for air toxic emissions controls may arise as the U. S. Environmental Protection Agency proceeds with implementation of Title III of the Clean Air Act Amendment (CAAA) of 1990. Data generated during the program will provide utilities with the technical and economic information necessary to reliably evaluate various air toxics emissions compliance options such as fuel switching, coal cleaning, and flue gas treatment. The development work is being carried out using B&W?s new Clean Environment Development Facility (CEDF) wherein air toxics emissions control strategies can be developed under controlled conditions, and with proven predictability to commercial systems. Tests conducted in the CEDF provide high quality, repeatable, comparable data over a wide range of coal properties, operating conditions, and emissions control systems. Development work to date has concentrated on the capture of mercury, other trace metals, fine particulate, and the inorganic species hydrogen chloride and hydrogen fluoride.

A. P. Evans

1998-12-03T23:59:59.000Z

499

Advanced Emission Control Development Program.  

SciTech Connect

Babcock & Wilcox (B&W) is conducting a five-year project aimed at the development of practical, cost-effective strategies for reducing the emissions of hazardous air pollutants (commonly called air toxics) from coal-fired electric utility plants. The need for air toxic emissions controls may arise as the U. S. Environmental Protection Agency proceeds with implementation of Title III of the Clean Air Act Amendment (CAAA) of 1990. Data generated during the program will provide utilities with the technical and economic information necessary to reliably evaluate various air toxics emissions compliance options such as fuel switching, coal cleaning, and flue gas treatment. The development work is being carried out using B&W`s new Clean Environment Development Facility (CEDF) wherein air toxics emissions control strategies can be developed under controlled conditions, and with proven predictability to commercial systems. Tests conducted in the CEDF provide high quality, repeatable, comparable data over a wide range of coal properties, operating conditions, and emissions control systems. Development work to date has concentrated on the capture of mercury, other trace metals, fine particulate, and the inorganic species hydrogen chloride and hydrogen fluoride.

Evans, A.P.

1997-12-31T23:59:59.000Z