Powered by Deep Web Technologies
Note: This page contains sample records for the topic "ozone monitoring instrument" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Validation of Ozone Monitoring Instrument nitrogen dioxide columns E. A. Celarier,1  

E-Print Network [OSTI]

Validation of Ozone Monitoring Instrument nitrogen dioxide columns E. A. Celarier,1 E. J. Brinksma the standard nitrogen dioxide (NO2) data product (Version 1.0.), which is based on measurements made), Validation of Ozone Monitoring Instrument nitrogen dioxide columns, J. Geophys. Res., 113, D15S15, doi:10

2

Ground-level nitrogen dioxide concentrations inferred from the satellite-borne Ozone Monitoring Instrument  

E-Print Network [OSTI]

Ground-level nitrogen dioxide concentrations inferred from the satellite-borne Ozone Monitoring; published 28 August 2008. [1] We present an approach to infer ground-level nitrogen dioxide (NO2), Ground-level nitrogen dioxide concentrations inferred from the satellite-borne Ozone Monitoring

Martin, Randall

3

E-Print Network 3.0 - aura-omi tropospheric ozone Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

atmospheric ozone. The Ozone Monitoring Instrument (OMI) onboard the satellite provides global total column ozone (TCO) and in combination Summary: with other instruments...

4

Hanford site seismic monitoring instrumentation plan  

SciTech Connect (OSTI)

This document provides a plan to comply with the seismic monitoring provisions of US DOE Order 5480.28, Natural Phenomena Hazards.

Reidel, S.P.

1996-02-29T23:59:59.000Z

5

An instrumentation package for monitoring tractor performance  

E-Print Network [OSTI]

of performance for most current tractor models was engine speed. Since overall tractor performance was influenced by several operating variables, not just engine speed, additional monitors and displays of performance were needed. Tractor performance monitors... Rotational Sp D' fferential Speed Measurement Draft Measurement Rear Axle Torque Measurement Fuel Consumption Measurement Campbell CR5 Digital Recorder Field Test Design and Procedures Data Requirements Test Site and Field Variables Travel Speed...

Green, Malcolm Kirk

1983-01-01T23:59:59.000Z

6

Constraining global isoprene emissions with Global Ozone Monitoring Experiment (GOME) formaldehyde column measurements  

E-Print Network [OSTI]

Constraining global isoprene emissions with Global Ozone Monitoring Experiment (GOME) formaldehyde emission estimates are highly uncertain because of a lack of direct observations. Formaldehyde (HCHO the observation of this trace gas to help constrain isoprene emissions. We use HCHO column observations from

Chance, Kelly

7

Net ecosystem fluxes of isoprene over tropical South America inferred from Global Ozone Monitoring Experiment (GOME)  

E-Print Network [OSTI]

Net ecosystem fluxes of isoprene over tropical South America inferred from Global Ozone Monitoring estimate isoprene emissions over tropical South America during 1997­2001 using column measurements (ATSR) firecounts and GOME NO2 columns. We find that South America can be split into eastern and western

Chance, Kelly

8

Ultrasonic wave-based structural health monitoring embedded instrument  

SciTech Connect (OSTI)

Piezoelectric sensors and actuators are the bridge between electronic and mechanical systems in structures. This type of sensor is a key element in the integrity monitoring of aeronautic structures, bridges, pressure vessels, wind turbine blades, and gas pipelines. In this paper, an all-in-one system for Structural Health Monitoring (SHM) based on ultrasonic waves is presented, called Phased Array Monitoring for Enhanced Life Assessment. This integrated instrument is able to generate excitation signals that are sent through piezoelectric actuators, acquire the received signals in the piezoelectric sensors, and carry out signal processing to check the health of structures. To accomplish this task, the instrument uses a piezoelectric phased-array transducer that performs the actuation and sensing of the signals. The flexibility and strength of the instrument allow the user to develop and implement a substantial part of the SHM technique using Lamb waves. The entire system is controlled using configuration software and has been validated through functional, electrical loading, mechanical loading, and thermal loading resistance tests.

Aranguren, G.; Monje, P. M., E-mail: pedromaria.monje@ehu.es [Electronic Design Group, Faculty of Engineering of Bilbao, University of the Basque Country, Bilbao (Spain); Cokonaj, Valerijan [AERnnova Engineering Solutions Ibérica S.A., Madrid (Spain)] [AERnnova Engineering Solutions Ibérica S.A., Madrid (Spain); Barrera, Eduardo; Ruiz, Mariano [Instrumentation and Applied Acoustic Research Group of the Technical University of Madrid, Madrid (Spain)] [Instrumentation and Applied Acoustic Research Group of the Technical University of Madrid, Madrid (Spain)

2013-12-15T23:59:59.000Z

9

Instrumentation for Monitoring around Marine Renewable Energy Converters: Workshop Final Report  

SciTech Connect (OSTI)

Report on workshop held in Seattle for DOE WWPTO on instrument needs for monitoring marine energy devices

Copping, Andrea E.; Polagye, Brian

2014-01-31T23:59:59.000Z

10

AHIGHLY INSTRUMENTED UNDERGROUND RESEARCH GALLERY AS A MONITORING CONCEPT FOR RADIOACTIVE WASTE CELLS -DATA  

E-Print Network [OSTI]

AHIGHLY INSTRUMENTED UNDERGROUND RESEARCH GALLERY AS A MONITORING CONCEPT FOR RADIOACTIVE WASTE monitoring system of underground disposal for the French long-lived, intermediate and high level radioactive is a concrete liner in a tunnel aiming at support the mechanical pressure of the host rock. A 3.6 meter long

Boyer, Edmond

11

ARM - Instrument - ozone  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcal Documentation(AVIRIS)govInstrumentsgramsgovInstrumentsngm DocumentationgovInstrumentsozone Documentation ARM

12

ARM - Campaign Instrument - ozone  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)

13

Validation of SO2 retrievals from the Ozone Monitoring Instrument over NE China  

E-Print Network [OSTI]

and biofuels. It can be a noxious pollutant or a major player in global climate forcing, depending on altitude

Li, Zhanqing

14

Evaluation of stratospheric NO2 retrieved from the Ozone Monitoring Instrument: Intercomparison, diurnal cycle,  

E-Print Network [OSTI]

[Intergovernmental Panel on Climate Change, 2007], influence the oxidizing capacity of the troposphere, and affect on the tem- poral behavior of NOx emissions. [3] Satellite remote sensing is used for measuring strato since the 1980s, e.g., SME (Solar Mesosphere Explorer) [Mount et al., 1984], which first used the DOAS

Boersma, Folkert

15

New portable hand-held radiation instruments for measurements and monitoring  

SciTech Connect (OSTI)

Hand-held radiation monitors are often used to search pedestrians and motor vehicles for special nuclear material (SNM) as part of a physical protection plan for nuclear materials. Recently, the Los Alamos Advanced Nuclear Technology group has commercialized an improved hand-held monitor that can be used for both physical-protection monitoring and verification measurements in nuclear material control and waste management. The new monitoring instruments are smaller and lighter; operate much longer on a battery charge; are available with NaI(Tl) or neutron and gamma-ray sensitive plastic scintillation detectors; and are less expensive than other comparable instruments. They also have a second operating mode for making precise measurements over counting times as long as 99 s. This mode permits making basic verification measurements that may be needed before transporting nuclear material or waste outside protected areas. Improved verification measurements can be made with a second new hand-held instrument that has a stabilized detector and three separate gamma-ray energy windows to obtain spectral information for SNM quantity, enrichment, or material-type verification.

Fehlau, P.E.

1987-01-01T23:59:59.000Z

16

Characterization and correction of Global Ozone Monitoring Experiment 2 ultraviolet measurements and application  

E-Print Network [OSTI]

analysis indicates that reflectance degradation began at the beginning of the mission; the reflectance degrades by 15% around 290 nm and by 2.2% around 325 nm from 2007 through 2009. Degradation shows of radiance in the ultraviolet (UV) region is essential for retrievals of ozone profiles especially

Chance, Kelly

17

Appendices 43 Appendix 2. List of registrants and respective affiliation for the Federal Interagency Sediment Monitoring Instrument and Analysis Research  

E-Print Network [OSTI]

City UT 84119 Krause Andreas Trinity River Restoration Prgm. Weaverville CA 96093 Kuhnle Roger ARS Weaverville CA 96093 #12;44 Proceedings of the Federal Interagency Sediment Monitoring Instrument and Analysis

18

Nuclear incident monitor criticality alarm instrument for the Savannah River Site: Technical manual  

SciTech Connect (OSTI)

The Savannah River Site is a Department of Energy facility. The facility stores, processes, and works with fissionable material at a number of locations. Technical standards and US Department of Energy orders, require these locations to be monitored by criticality alarm systems under certain circumstances. The Savannah River Site calls such instruments Nuclear Incident Monitors or NIMs. The Sole purpose of the Nuclear Incident Monitor is to provide an immediate evacuation signal in the case of an accidental criticality in order to minimize personnel exposure to radiation. The new unit is the third generation Nuclear Incident Monitor at the Savannah River Site. The second generation unit was developed in 1979. It was designed to eliminate vacuum-tube circuits, and was the first solid state NIM at SRS. The major design objectives of the second generation NIM were to improve reliability and reduce maintenance costs. Ten prototype units have been built and tested. This report describes the design of the new NIM and the testing that took place to verify its acceptability.

Jenkins, J.B.

1996-05-21T23:59:59.000Z

19

Monitoring  

SciTech Connect (OSTI)

The invention provides apparatus and methods which facilitate movement of an instrument relative to an item or location being monitored and/or the item or location relative to the instrument, whilst successfully excluding extraneous ions from the detection location. Thus, ions generated by emissions from the item or location can successfully be monitored during movement. The technique employs sealing to exclude such ions, for instance, through an electro-field which attracts and discharges the ions prior to their entering the detecting location and/or using a magnetic field configured to repel the ions away from the detecting location.

Orr, Christopher Henry (Calderbridge, GB); Luff, Craig Janson (Calderbridge, GB); Dockray, Thomas (Calderbridge, GB); Macarthur, Duncan Whittemore (Los Alamos, NM)

2004-11-23T23:59:59.000Z

20

IEEE TRANSACTIONS ON GEOSCIENCE AND REMOTE SENSING, VOL. 44, NO. 5, MAY 2006 1209 Ozone Monitoring Instrument Calibration  

E-Print Network [OSTI]

, University of Maryland Baltimore County, Baltimore, MD 21250 USA (e-mail: Ernest.Hilsenrath@nasa.gov). G. W is with Dutch Space BV, NL 2303 DB Leiden, The Netherlands. W. Dierssen and N. C. Rozemeijer are with Tri

Dirksen, Ruud

Note: This page contains sample records for the topic "ozone monitoring instrument" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Neutron monitoring systems including gamma thermometers and methods of calibrating nuclear instruments using gamma thermometers  

DOE Patents [OSTI]

A method of calibrating a nuclear instrument using a gamma thermometer may include: measuring, in the instrument, local neutron flux; generating, from the instrument, a first signal proportional to the neutron flux; measuring, in the gamma thermometer, local gamma flux; generating, from the gamma thermometer, a second signal proportional to the gamma flux; compensating the second signal; and calibrating a gain of the instrument based on the compensated second signal. Compensating the second signal may include: calculating selected yield fractions for specific groups of delayed gamma sources; calculating time constants for the specific groups; calculating a third signal that corresponds to delayed local gamma flux based on the selected yield fractions and time constants; and calculating the compensated second signal by subtracting the third signal from the second signal. The specific groups may have decay time constants greater than 5.times.10-1 seconds and less than 5.times.105 seconds.

Moen, Stephan Craig; Meyers, Craig Glenn; Petzen, John Alexander; Foard, Adam Muhling

2012-08-07T23:59:59.000Z

22

Paper Presented at International Instrumentation Symposium PNNL-SA-35920 Embedded Health Monitoring Workshop, May 2002  

E-Print Network [OSTI]

for the gas turbine engine used on the M1 Abrams tank. Research was performed on methods for real time Monitoring (PHM) system for the gas turbine engine used on the M1 Abrams tank. The purpose of this paper

23

Concentration of ozone in surface air over greater Boston  

E-Print Network [OSTI]

Surface ozone concentrations were measured in the Greater Boston area from November, 1964 to December, 1965. Ozone was monitored continuosly using a Mast microcoulombmetric sensor. A chromium trioxide filter was fitted to ...

Widen, Donald Allen

1966-01-01T23:59:59.000Z

24

An ozone climatology of the Dallas-Fort Worth area and its relationship to meteorology  

E-Print Network [OSTI]

, no extensive studies on ozone in this area have been published. This study presents a broad overview of the ozone problem in the DFW area. An ozone spatial and temporal climatology was constructed using ozone data at 23 different monitoring sites from 1980...

Nobis, Timothy Edward

1998-01-01T23:59:59.000Z

25

INSTRUMENTATION FOR ENVIRONMENTAL MONITORING  

E-Print Network [OSTI]

Nuclear Weapons Advancing Technology Nuclear Power U.Th cosmic rays Diagnostic x-rays (medical, dental) U.S. , Russian tests (

McLaughlin, R.D.

2010-01-01T23:59:59.000Z

26

URBAN OZONE CONCENTRATION FORECASTING WITH ARTIFICIAL NEURAL NETWORK IN CORSICA  

E-Print Network [OSTI]

Perceptron; Ozone concentration. 1. Introduction Tropospheric ozone is a major air pollution problem, both, Ajaccio, France, e-mail: balu@univ-corse.fr Abstract: Atmospheric pollutants concentration forecasting is an important issue in air quality monitoring. Qualitair Corse, the organization responsible for monitoring air

Boyer, Edmond

27

Experimental investigation of a flow monitoring instrument in an upper plenum of an air-water reflood test facility. [PWR  

SciTech Connect (OSTI)

Instrumentation was developed for measuring fluid phenomena in the upper plenum of pressurized water reactor reflood facilities. In particular, the instrumentation measured two-phase flow velocity and void fraction. The principle of operation of the instrumentation scheme was based on the measurement of electrical impedance. The technique of analysis of random signals from two spatially separated impedance sensors was employed to measure two-phase flow velocity. A relative admittance technique was used to determine void fraction. The performance of the instrumentaton was studied in an air-water test facility.

Combs, S.K.; Hardy, J.E.

1980-01-01T23:59:59.000Z

28

Methane production from ozonated pulp mill effluent  

SciTech Connect (OSTI)

A study was made of the production of methane from desugared spent sulfite liquor (SSL) reacted with ozone. The ozonated SSL was fed continuously to three anaerobic fermenters for three months as the sole source of carbon and energy. The fermenters were inoculated with anaerobic bacteria obtained from sewage sludge and acclimated for 1 month in ozonated SSL prior to continuous fermentation. Chemical and biological parameters such as COD, BOD, total sulfur content, redox potential, pH, fatty acid composition, and methane bacteria populations were monitored to determine changes in the SSL during fermentation. Methane production from ozone-treated SSL averaged 1.7 liters/ liter or 17 ml of CH/sub 4/ produced/gram of volatile solids fed. Fatty acis analysis of fermenter effluent indicated a net production of 58 mM/ liter of acetate during ozonated SSL fermentation. This acetic acid production shows future potential for further fermentation by protein-producing yeast. Although the rate of conversion of volatile solids to CH/sub 4/ in this process was not competitive with domestic or agricultural waste digesters, this study did indicate the potential benefits of ozonating organic wastes for increased methane fermentation yields.

Bremmon, C.E.; Jurgensen, M.F.; Patton, J.T.

1980-07-01T23:59:59.000Z

29

SDI: Solar Dome Instrument for Solar Irradiance Monitoring Tao Liu1, Ankur U. Kamthe1, Varick L. Erickson1, Carlos F. M. Coimbra2 and Alberto E. Cerpa1  

E-Print Network [OSTI]

SDI: Solar Dome Instrument for Solar Irradiance Monitoring Tao Liu1, Ankur U. Kamthe1, Varick L data for ground solar irradiance (direct normal and global irradiance) is a major obstacle for the de- velopment of adequate policies to promote and take advan- tage of existing solar technologies. Although

Cerpa, Alberto E.

30

Exertion instruments  

E-Print Network [OSTI]

This dissertation describes the research, development and reasoning behind a family of musical instruments called Exertion Instruments. They use inline electrical generators to run a synthesizer and an amplifier while ...

Vawter, Noah (Noah Theodore)

2011-01-01T23:59:59.000Z

31

Nuclear Instruments and Methods in Physics Research A 428 (1999) 593}607 Radio-controlled xenon #ashers for atmospheric monitoring  

E-Print Network [OSTI]

Nuclear Instruments and Methods in Physics Research A 428 (1999) 593}607 Radio-controlled xenon 84119, USA. Now at: University of Kansas, Department of Physics, Law- rence, KS 66045, USA. Now at: Wave

32

7, 97959828, 2007 Tropospheric ozone  

E-Print Network [OSTI]

ACPD 7, 9795­9828, 2007 Tropospheric ozone climatology over Beijing A. J. Ding et al. Title Page Chemistry and Physics Discussions Tropospheric ozone climatology over Beijing: analysis of aircraft data;ACPD 7, 9795­9828, 2007 Tropospheric ozone climatology over Beijing A. J. Ding et al. Title Page

Paris-Sud XI, Université de

33

8, 1106311101, 2008 Tropospheric Ozone  

E-Print Network [OSTI]

ACPD 8, 11063­11101, 2008 Tropospheric Ozone climatology in the southern subtropics G. Clain et al.0 License. Atmospheric Chemistry and Physics Discussions Tropospheric ozone climatology at two southern Tropospheric Ozone climatology in the southern subtropics G. Clain et al. Title Page Abstract Introduction

Paris-Sud XI, Université de

34

NOx Emission Reduction and its Effects on Ozone during the 2008 Olympic Games  

SciTech Connect (OSTI)

We applied a daily-assimilated inversion method to estimate NOx (NO+NO2) emissions for June-September 2007 and 2008 on the basis of the Aura Ozone Monitoring Instrument (OMI) observations of nitrogen dioxide (NO2) and model simulations using the Regional chEmistry and trAnsport Model (REAM). Over urban Beijing, rural Beijing, and the Huabei Plain, OMI column NO2 reductions are approximately 45%, 33%, and 14%, respectively, while the corresponding anthropogenic NOx emission reductions are only 28%, 24%, and 6%, during the full emission control period (July 20 – Sep 20, 2008). The emission reduction began in early July and was in full force by July 20, corresponding to the scheduled implementation of emission controls over Beijing. The emissions did not appear to recover after the emission control period. Meteorological change from summer 2007 to 2008 is the main factor contributing to the column NO2 decreases not accounted for by the emission reduction. Model simulations suggest that the effect of emission reduction on ozone concentrations over Beijing is relatively minor using a standard VOC emission inventory in China. With an adjustment of the model emissions to reflect in situ observations of VOCs in Beijing, the model simulation suggests a larger effect of the emission reduction.

Yang, Qing; Wang, Yuhang; Zhao, Chun; Liu, Zhen; Gustafson, William I.; Shao, Min

2011-07-15T23:59:59.000Z

35

Exposure-Relevant Ozone Chemistry in Occupied Spaces  

SciTech Connect (OSTI)

Ozone, an ambient pollutant, is transformed into other airborne pollutants in the indoor environment. In this dissertation, the type and amount of byproducts that result from ozone reactions with common indoor surfaces, surface residues, and vapors were determined, pollutant concentrations were related to occupant exposure, and frameworks were developed to predict byproduct concentrations under various indoor conditions. In Chapter 2, an analysis is presented of secondary organic aerosol formation from the reaction of ozone with gas-phase, terpene-containing consumer products in small chamber experiments under conditions relevant for residential and commercial buildings. The full particle size distribution was continuously monitored, and ultrafine and fine particle concentrations were in the range of 10 to>300 mu g m-3. Particle nucleation and growth dynamics were characterized.Chapter 3 presents an investigation of ozone reactions with aircraft cabin surfaces including carpet, seat fabric, plastics, and laundered and worn clothing fabric. Small chamber experiments were used to determine ozone deposition velocities, ozone reaction probabilities, byproduct emission rates, and byproduct yields for each surface category. The most commonly detected byproducts included C1?C10 saturated aldehydes and skin oil oxidation products. For all materials, emission rates were higher with ozone than without. Experimental results were used to predict byproduct exposure in the cabin and compare to other environments. Byproduct levels are predicted to be similar to ozone levels in the cabin, which have been found to be tens to low hundreds of ppb in the absence of an ozone converter. In Chapter 4, a model is presented that predicts ozone uptake by and byproduct emission from residual chemicals on surfaces. The effects of input parameters (residue surface concentration, ozone concentration, reactivity of the residue and the surface, near-surface airflow conditions, and byproduct yield) were explored. In Chapter 5, the reaction of ozone with permethrin, a residual insecticide used in aircraft cabins, to form phosgene is investigated. A derivatization technique was developed to detect phosgene at low levels, and chamber experiments were conducted with permethrin-coated cabin materials. It was determined that phosgene formation, if it occurs in the aircraft cabin, is not likely to exceed the relevant, health-based phosgene exposure guidelines.

Coleman, Beverly Kaye

2009-04-01T23:59:59.000Z

36

Ion Monitoring  

DOE Patents [OSTI]

The apparatus and method provide a technique for significantly reducing capacitance effects in detector electrodes arising due to movement of the instrument relative to the item/location being monitored in ion detection based techniques. The capacitance variations are rendered less significant by placing an electrically conducting element between the detector electrodes and the monitored location/item. Improved sensitivity and reduced noise signals arise as a result. The technique also provides apparatus and method suitable for monitoring elongate items which are unsuited to complete enclosure in one go within a chamber. The items are monitored part by part as the pass through the instrument, so increasing the range of items or locations which can be successfully monitored.

Orr, Christopher Henry (Calderbridge, GB); Luff, Craig Janson (Calderbridge, GB); Dockray, Thomas (Calderbridge, GB); Macarthur, Duncan Whittemore (Los Alamos, NM)

2003-11-18T23:59:59.000Z

37

Ozone decomposing filter  

DOE Patents [OSTI]

In an improved ozone decomposing air filter carbon fibers are held together with a carbonized binder in a perforated structure. The structure is made by combining rayon fibers with gelatin, forming the mixture in a mold, freeze-drying, and vacuum baking.

Simandl, Ronald F. (Farragut, TN); Brown, John D. (Harriman, TN); Whinnery, Jr., LeRoy L. (Dublin, CA)

1999-01-01T23:59:59.000Z

38

AC resistance measuring instrument  

DOE Patents [OSTI]

An auto-ranging AC resistance measuring instrument for remote measurement of the resistance of an electrical device or circuit connected to the instrument includes a signal generator which generates an AC excitation signal for application to a load, including the device and the transmission line, a monitoring circuit which provides a digitally encoded signal representing the voltage across the load, and a microprocessor which operates under program control to provide an auto-ranging function by which range resistance is connected in circuit with the load to limit the load voltage to an acceptable range for the instrument, and an auto-compensating function by which compensating capacitance is connected in shunt with the range resistance to compensate for the effects of line capacitance. After the auto-ranging and auto-compensation functions are complete, the microprocessor calculates the resistance of the load from the selected range resistance, the excitation signal, and the load voltage signal, and displays of the measured resistance on a digital display of the instrument. 8 figs.

Hof, P.J.

1983-10-04T23:59:59.000Z

39

INTERRELAITONS BETWEEN VARIABILITY OF GROUND-LEVEL OZONE AND LAND COVER CHANGE  

E-Print Network [OSTI]

ozone monitoring stations in Connecticut and Rohde Island were used for the analysis. The monitoring stations were classified into different categories based on their locations and land cover characteristics. Cars and gasoline-burning engines are large sources of VOCs. VOCs also come from consumer products

Wang, Y.Q. "Yeqiao"

40

Instrumented Pipeline Initiative  

SciTech Connect (OSTI)

This report summarizes technical progress achieved during the cooperative agreement between Concurrent Technologies Corporation (CTC) and U.S. Department of Energy to address the need for a for low-cost monitoring and inspection sensor system as identified in the Department of Energy (DOE) National Gas Infrastructure Research & Development (R&D) Delivery Reliability Program Roadmap.. The Instrumented Pipeline Initiative (IPI) achieved the objective by researching technologies for the monitoring of pipeline delivery integrity, through a ubiquitous network of sensors and controllers to detect and diagnose incipient defects, leaks, and failures. This report is organized by tasks as detailed in the Statement of Project Objectives (SOPO). The sections all state the objective and approach before detailing results of work.

Thomas Piro; Michael Ream

2010-07-31T23:59:59.000Z

Note: This page contains sample records for the topic "ozone monitoring instrument" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

ARM - Instruments  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation InInformation InExplosionAnnouncements MediagovCampaignsListgovInstrumentsLocation

42

ARM - Instruments  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD) by Microtops Atmospheric OpticalExperiment (VORTEX)govCampaignsWintergovInstrumentsAirborne

43

Field instrumentation for vocalizing avian survey  

E-Print Network [OSTI]

We present automated instruments to facilitate the monitoring of vocalizing species in their environment with minimal disruption. These devices offer recording and acoustic localization of bird calls and relay data via the ...

Elliott, Grant (Grant Andrew)

2007-01-01T23:59:59.000Z

44

Radiation Protection Instrument Manual, Revision 1, PNL-MA-562  

SciTech Connect (OSTI)

PNL-MA-562 This manual provides specific information for operating and using portable radiological monitoring instruments available for use on the Hanford Site.

Johnson, Michelle Lynn

2009-09-23T23:59:59.000Z

45

Ozone concentrations in El Paso, Texas  

SciTech Connect (OSTI)

El Paso, Texas may have a problem in meeting ambient air standards due to influx of pollutants from foreign sources. Cd. Juarez, Chihuahua, and Fort Bliss abut the city and are areas over which the Texas Air Control Board (TACB) has little or no jurisdiction. The Board maintains two Continuous Air Monitoring Stations (CAM) in El Paso. Ozone, nitric oxide, and nitrogen dioxide data were obtained from these stations. If the EPA Empirical Kinetic Model is used for El Paso, reducing NMHC concentrations may increase rather than decrease O/sub 3/ concentrations. The Texas State Implementation Plan, while not based on Empirical Kinetic Modeling, calls for a reduction of 18% in NMHC. However, 31% of all NMHC in El Paso arise from sources over which Texas had little (a federal military reservation) or no (Cd. Juarez) jurisdiction. It appears the TACB is correct in believing the SIP for O/sub 3/ may not bring El Paso into compliance. (JMT)

Crocker, J.E. (Texas Air Control Board, Austin); Applegate, H.G.

1983-02-01T23:59:59.000Z

46

Portable instrument and method for detecting reduced sulfur compounds in a gas  

DOE Patents [OSTI]

A portable real time instrument for detecting concentrations in the part per billion range of reduced sulfur compounds in a sample gas. Ozonized air or oxygen and reduced sulfur compounds in a sample gas stream react to produce chemiluminescence in a reaction chamber and the emitted light is filtered and observed by a photomultiplier to detect reduced sulfur compounds. Selective response to individual sulfur compounds is achieved by varying reaction chamber temperature and ozone and sample gas flows, and by the use of either air or oxygen as the ozone source gas.

Gaffney, J.S.; Kelly, T.J.; Tanner, R.L.

1983-06-01T23:59:59.000Z

47

E-Print Network 3.0 - air pollutants ozone Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

1 Global Ozone Project Ozone Formation in Summary: , power plants and industry all emit air pollution that forms ground-level ozone. Ozone is a primary... Stratospheric and...

48

Low activated incore instrument  

DOE Patents [OSTI]

Instrumentation for nuclear reactor head-mounted incore instrumentation systems fabricated of low nuclear cross section materials (i.e., zirconium or titanium). The instrumentation emits less radiation than that fabricated of conventional materials.

Ekeroth, Douglas E. (Delmont, PA)

1994-01-01T23:59:59.000Z

49

Low activated incore instrument  

DOE Patents [OSTI]

Instrumentation is described for nuclear reactor head-mounted incore instrumentation systems fabricated of low nuclear cross section materials (i.e., zirconium or titanium). The instrumentation emits less radiation than that fabricated of conventional materials. 9 figures.

Ekeroth, D.E.

1994-04-19T23:59:59.000Z

50

Ozone Reductions Using Residential Building Envelopes  

SciTech Connect (OSTI)

Ozone is an air pollutant with that can have significant health effects and a significant source of ozone in some regions of California is outdoor air. Because people spend the vast majority of their time indoors, reduction in indoor levels of ozone could lead to improved health for many California residents. Ozone is removed from indoor air by surface reactions and can also be filtered by building envelopes. The magnitude of the envelope impact depends on the specific building materials that the air flows over and the geometry of the air flow paths through the envelope that can be changes by mechanical ventilation operation. The 2008 Residential Building Standards in California include minimum requirements for mechanical ventilation by referencing ASHRAE Standard 62.2. This study examines the changes in indoor ozone depending on the mechanical ventilation system selected to meet these requirements. This study used detailed simulations of ventilation in a house to examine the impacts of different ventilation systems on indoor ozone concentrations. The simulation results showed that staying indoors reduces exposure to ozone by 80percent to 90percent, that exhaust ventilation systems lead to lower indoor ozone concentrations, that opening of windows should be avoided at times of high outdoor ozone, and that changing the time at which mechanical ventilation occurs has the ability to halve exposure to ozone. Future work should focus on the products of ozone reactions in the building envelope and the fate of these products with respect to indoor exposures.

Walker, Iain S.; Sherman, Max; Nazaroff, William W.

2009-02-01T23:59:59.000Z

51

Candidate Selection Instrument  

Broader source: Energy.gov [DOE]

The candidate selection instrument is designed to take the guesswork out of selecting candidates for the various career development programs of interest. The instrument is straightforward and...

52

Evaluating musical instruments  

SciTech Connect (OSTI)

Scientific measurements of sound generation and radiation by musical instruments are surprisingly hard to correlate with the subtle and complex judgments of instrumental quality made by expert musicians.

Campbell, D. Murray

2014-04-01T23:59:59.000Z

53

Ozone decomposition in water solutions  

E-Print Network [OSTI]

. Hewes, III; B. S. , Texas ASH University Directed by Dr. R. R. Davison The rate of the decomposition of ozone in water solutions at various pH's and temperatures were ob- tained by an iodometrical method. The orders of the reactions and the reaction...

Hewes, Cecil Grayson

1969-01-01T23:59:59.000Z

54

6, 74277469, 2006 Linear ozone  

E-Print Network [OSTI]

from biases in the schemes' climatology coefficients. Cariolle v2.1 analyses showed biases of up to 20 and Kelder (1998) ozone climatology into the scheme. Chem2D-OPP v2.1 analyses showed biases up to 20 analysed temperatures and the temperature climatology supplied with the scheme. Future developments should

Boyer, Edmond

55

2, 15091543, 2002 Ozone production  

E-Print Network [OSTI]

.atmos-chem-phys.org/acpd/2/1509/ c European Geosciences Union 2002 Atmospheric Chemistry and Physics Discussions Ozone as a consequence of local catabatic winds. Aver- age mid-day peroxy radical concentrations at Mt. Cimone; Atlas and Ridley, 1996; Fischer et al., 1998; Zanis et al., 2000a, b). Often, free tropospheric

Boyer, Edmond

56

Career Map: Instrumentation Coordinator  

Broader source: Energy.gov [DOE]

The Wind Program's Career Map provides job description information for Instrumentation Coordinator positions.

57

Tritium monitor  

DOE Patents [OSTI]

A system is described for continuously monitoring the concentration of tritium in an aqueous stream. The system pumps a sample of the stream to magnesium-filled combustion tube which reduces the sample to extract hydrogen gas. The hydrogen gas is then sent to an isotope separation device where it is separated into two groups of isotopes: a first group of isotopes containing concentrations of deuterium and tritium, and a second group of isotopes having substantially no deuterium and tritium. The first group of isotopes containing concentrations of deuterium and tritium is then passed through a tritium detector that produces an output proportional to the concentration of tritium detected. Preferably, the detection system also includes the necessary automation and data collection equipment and instrumentation for continuously monitoring an aqueous stream. 1 fig.

Chastagner, P.

1994-06-14T23:59:59.000Z

58

Tritium monitor  

DOE Patents [OSTI]

A system for continuously monitoring the concentration of tritium in an aqueous stream. The system pumps a sample of the stream to magnesium-filled combustion tube which reduces the sample to extract hydrogen gas. The hydrogen gas is then sent to an isotope separation device where it is separated into two groups of isotopes: a first group of isotopes containing concentrations of deuterium and tritium, and a second group of isotopes having substantially no deuterium and tritium. The first group of isotopes containing concentrations of deuterium and tritium is then passed through a tritium detector that produces an output proportional to the concentration of tritium detected. Preferably, the detection system also includes the necessary automation and data collection equipment and instrumentation for continuously monitoring an aqueous stream.

Chastagner, Philippe (Augusta, GA)

1994-01-01T23:59:59.000Z

59

Ozone production in transpacific Asian pollution plumes and implications for ozone air quality in California  

E-Print Network [OSTI]

Ozone production in transpacific Asian pollution plumes and implications for ozone air quality in transpacific Asian pollution plumes, and the implications for ozone air quality in California, by using pollution plumes. Strong dilution of Asian pollution plumes takes place during entrainment in the U

Park, Rokjin

60

Discharge cell for ozone generator  

DOE Patents [OSTI]

A discharge cell for use in an ozone generator is provided which can suppress a time-related reduction in ozone concentration without adding a catalytic gas such as nitrogen gas to oxygen gas as a raw material gas. The discharge cell includes a pair of electrodes disposed in an opposed spaced relation with a discharge space therebetween, and a dielectric layer of a three-layer structure consisting of three ceramic dielectric layers successively stacked on at least one of the electrodes, wherein a first dielectric layer of the dielectric layer contacting the one electrode contains no titanium dioxide, wherein a second dielectric layer of the dielectric layer exposed to the discharge space contains titanium dioxide in a metal element ratio of not lower than 10 wt %.

Nakatsuka, Suguru (Amagasaki, JP)

2000-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ozone monitoring instrument" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Y-12 Plant Stratospheric Ozone Protection plan  

SciTech Connect (OSTI)

The Y-12 Plant staff is required by Lockheed Martin Energy Systems (Energy Systems) (formerly Martin Marietta Energy Systems) standard ESS-EP-129 to develop and implement a Stratospheric Ozone Protection Program which will minimize emissions of ozone-depleting substances to the environment and maximize the use of ozone-safe alternatives in order to comply with Title VI of the 1990 Clean Air Act (CAA) Amendments and the implementing regulations promulgated by the Environmental Protection Agency (EPA). This plan describes the requirements, initiatives, and accomplishments of the Y-12 Plant Stratospheric Ozone Protection Program.

NONE

1995-09-01T23:59:59.000Z

62

Tropospheric Ozone Pollution and Personal Exposure  

E-Print Network [OSTI]

://www.nctcog.org/trans/air/ozone/formation.gif #12;Health Effects · Chest pain, coughing, throat irritation, and congestion · Wheezing and difficulty

Toohey, Darin W.

63

DOE's Studies of Weekday/Weekend Ozone Pollution in Southern...  

Energy Savers [EERE]

DOE's Studies of WeekdayWeekend Ozone Pollution in Southern California DOE's Studies of WeekdayWeekend Ozone Pollution in Southern California 2002 DEER Conference Presentation:...

64

Weekday and Weekend Air Pollutant Levels in Ozone Problem Areas...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Ambient Ozone Formation as a Function of NOx Reductions Summary and Implications for Air Quality Impacts DOE's Studies of WeekdayWeekend Ozone Pollution in Southern...

65

The Weekend Ozone Effect - The Weekly Ambient Emissions Control...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

More Documents & Publications WeekendWeekday Ozone Study in the South Coast Air Basin DOE's Studies of WeekdayWeekend Ozone Pollution in Southern California...

66

Re-evaluation of total and Umkehr ozone data from NOAA-CMDL Dobson spectrophotometer observatories. Final report  

SciTech Connect (OSTI)

This report describes work to improve the quality of total ozone and Umkehr data obtained in the past at the NOAA Climate Monitoring and Diagnostics Laboratory and the Dobson spectrophotometer ozone observatories. The authors present results of total ozone data re-evaluations for ten stations: Byrd, Antarctica; Fairbanks, Alaska; Hallett, Antarctica; Huancayo, Peru; Haute Provence, France; Lauder, New Zealand; Perth, Australia; Poker Flat, Alaska; Puerto Montt, Chile; and South Pole, Antarctica. The improved data will be submitted in early 1996 to the World Meteorological Organization (WMO) World Ozone Data Center (WODC), and the Atmospheric Environment Service for archiving. Considerable work has been accomplished, also, in reevaluating Umkehr data from seven of the stations, viz., Huancayo, Haute Provence, Lauder, Perth, Poker Flat, Boulder, Colorado; and Mauna Loa, Hawaii.

Komhyr, W.D.; Quincy, D.M.; Grass, R.D.; Koenig, G.L. [Univ. of Colorado, Boulder, CO (United States)] [Univ. of Colorado, Boulder, CO (United States); [National Oceanic and Atmospheric Administration, Boulder, CO (United States). Climate Monitoring and Diagnostics Lab.

1995-12-01T23:59:59.000Z

67

Laboratory measurement of secondary pollutant yields from ozone reaction with HVAC filters.  

SciTech Connect (OSTI)

We used Proton Transfer Reaction - Mass Spectrometry (PTR-MS) and conventional sampling methods to monitor and identify trace level organic pollutants formed in heterogeneous reactions between ozone and HVAC filters in real time. Experiments were carried out using a bench-scale flow tube reactor operating with dry air and humidified air (50% RH), at realistically high ozone concentrations (150 ppbv). We explored different filter media (i.e., fiberglass and cotton/polyester blends) and different particle loadings (i.e., clean filter and filters loaded with particles for 3 months at the Lawrence Berkeley National Laboratory and the Port of Oakland, CA). Detailed emission dynamics of very low levels of certain organic pollutants from filter media upon ozone exposure in the presence of moisture have been obtained and analyzed.

Destaillats, Hugo; Chen, Wenhao; Apte, Michael; Li, Nuan; Spears, Michael; Almosni, Jérémie; Zhang, Jianshun (Jensen); Fisk, William J.

2009-09-09T23:59:59.000Z

68

An Assessment of Tropospheric Ozone Pollution  

E-Print Network [OSTI]

An Assessment of Tropospheric Ozone Pollution --A North American Perspective-- Surface Urban, California 94304 #12;AN ASSESSMENT OF TROPOSPHERIC OZONE POLLUTION: A NORTH AMERICAN PERSPECTIVE The NARSTO, Instituto Mexicano del Petroleo, Mexico, D.F., Mexico Alan Dunker, General Motors Research & Development

69

Instrumenting Buildings to Determine Retrofit Savings: Murphy's Law Strikes Again  

E-Print Network [OSTI]

&M University. Metering typically includes monitoring for the whole-building electric load, chilled and hot water thermal loads and selected submetered electrical loads. The emphasis of the lessons learned was on the instrumentation used and installation...

O'Neal, D. L.; Bryant, J.; Carlson, K.

1998-01-01T23:59:59.000Z

70

Instant Profiling: Instrumentation Sampling for Profiling Datacenter Applications  

E-Print Network [OSTI]

Instant Profiling: Instrumentation Sampling for Profiling Datacenter Applications Hyoun Kyu Cho Profile-guided optimization possesses huge potential to save costs for datacenters. Hardware performance programmers find code regions to optimize by monitoring datacenter applications continuously on live traffic

Tomkins, Andrew

71

Laboratory measurement of secondary pollutant yields from ozone reaction with HVAC filters.  

E-Print Network [OSTI]

from Ozone Reaction with HVAC Filters Hugo Destaillats,from Ozone Reaction with HVAC Filters Hugo Destaillatsfrom Ozone Reaction with HVAC Filters Hugo Destaillats

Destaillats, Hugo

2012-01-01T23:59:59.000Z

72

Instrumented, Shielded Test Canister System for Evaluation of Spent Nuclear Fuel in Dry Storage  

SciTech Connect (OSTI)

This document describes the development of an instrumented, shielded test canister system to store and monitor aluminum-based spent nuclear duel under dry storage conditions.

Sindelar, R.L.

1999-10-21T23:59:59.000Z

73

Evaluation of Global Ozone Monitoring Experiment (GOME) ozone profiles from nine different algorithms  

E-Print Network [OSTI]

Netherlands), neural network (Center for Solar Energy and Hydrogen Research, Tor Vergata University), and data assimilation (German Aerospace Center) approaches. Analysis tools are used to interpret data sets that provide, Netherlands. 3 German Aerospace Center, Wessling, Germany. 4 NASA Goddard Space Flight Center, Greenbelt

Chance, Kelly

74

Evaluation of Instrumentation and Dynamic Thermal Ratings for Overhead Lines  

SciTech Connect (OSTI)

In 2010, a project was initiated through a partnership between the Department of Energy (DOE) and the New York Power Authority (NYPA) to evaluate EPRI?s rating technology and instrumentation that can be used to monitor the thermal states of transmission lines and provide the required real-time data for real-time rating calculations. The project included the installation and maintenance of various instruments at three 230 kV line sites in northern New York. The instruments were monitored, and data collection and rating calculations were performed for about a three year period.

Phillips, A.

2013-01-31T23:59:59.000Z

75

Intensity Frontier Instrumentation  

E-Print Network [OSTI]

This report summarizes findings of the 2013 Snowmass Community Summer Study Instrumentation Frontier's subgroup on the Intensity Frontier. This report is directed at identifying instrumentation R&D needed to support particle physics research over the coming decades at the Intensity Frontier.

S. H. Kettell; R. A. Rameika; R. S. Tschirhart

2013-09-26T23:59:59.000Z

76

17 October 2014 Antarctic Ozone Bulletin  

E-Print Network [OSTI]

as measured with an electrochemical ozonesonde on 10 October. One can see two large "bite-outs" of ozone). Ushuaia is marked with a green dot. One can see that Ushuaia is well inside the polar vortex. The PV data

Toohey, Darin W.

77

Ozone treatment of biomass to enhance digestibility  

E-Print Network [OSTI]

is very resistant to enzymatic degradation. Lignocellulosic materials require pretreatment to enhance their digestibility. The main objective of this research was to further enhance the digestibility of biomass (bagasse) with ozonation as a follow...

Almendarez, Maria Elena

2000-01-01T23:59:59.000Z

78

Pinatubo fails to deepen the ozone hole  

SciTech Connect (OSTI)

When the Philippine volcano Pinatubo exploded last year, pumping the upper atmosphere full of find debris, researchers foresaw yet another assault on the stratosphere's beleaguered ozone layer. Some calculations of the effects of volcanic debris implied that as much as 25% to 30% of the ozone shield over temperature latitudes might be eaten away by the volcanic haze - five times the observed loss over the past decade. Early measurements didn't bear out that concern, but researchers weren't prepared to call off the alarm until the verdict came in from the most vulnerable part of the planet's ozone layer, the frigid stratosphere over Antarctica. Although the hole was more extensive than ever before, probably because of unusual weather patterns, total ozone bottomed out well above the record set last year - even a tad above the low levels seen in 1987, 1989, and 1990.

Kerr, R.A.

1992-10-15T23:59:59.000Z

79

Total Ozone Mapping Spectrometer (TOMS) Derived Data, Global Earth Coverage (GEC) from NASA's Earth Probe Satellite  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

This is data from an external datastream processed through the ARM External Data Center (XDC) at Brookhaven National Laboratory. The XDC identifies sources and acquires data, called "external data", to augment the data being generated within the ARM program. The external data acquired are usually converted from native format to either netCDF or HDF formats. The GEC collection contains global data derived from the Total Ozone Mapping Spectrometer (TOMS) instrument on the Earth Probe satellite, consisting of daily values of aerosol index, ozone and reflectivity remapped into a regular 1x1.25 deg grid. Data are available from July 25, 1996 - December 31, 2005, but have been updated or replaced as of September 2007. See the explanation on the ARM web site at http://www.arm.gov/xds/static/toms.stm and the information at the NASA/TOMS web site: http://toms.gsfc.nasa.gov/ (Registration required)

80

Instrumenting C programs with Nested Word Swarat Chaudhuri and Rajeev Alur  

E-Print Network [OSTI]

Blast [5] and Slam [2], where a specification is a word automaton (or monitor) with finite- state" of a program and a monitor, in effect instrumenting the program with extra instructions, so that the input automata, and a tool to instrument C code using it. This language ex- tends the Blast specification

Chauduri, Swarat

Note: This page contains sample records for the topic "ozone monitoring instrument" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Instrumentation Report No. 3: performance and reliability of instrumentation deployed for the Spent Fuel Test - Climax  

SciTech Connect (OSTI)

A demonstration of the short-term storage and subsequent retrieval of spent nuclear fuel assemblies was successfully completed at the US Department of Energy`s Nevada Test Site. Nearly 1000 instruments were deployed to monitor the temperature of rock, air, and metallic components of the test; displacements and stress changes within the rock mass; radiation dosage to personnel and to the rock; thermal energy input; characteristics of the ventilation airstream; and the operational status of the test. Careful selection, installation, calibration, and maintenance of these instruments ensured the acquisition of about 15.3 x 10{sup 6} high-quality data points. With few exceptions, the performance and reliability of the instrumentation and associated data acquisition system (DAS) were within specified acceptable limits. Details of the performance and reliability of the instrumentation are discussed in this report. 42 figs., 32 tabs.

Patrick, W.C.; Rector, N.L.; Scarafiotti, J.J.

1984-12-01T23:59:59.000Z

82

Southern Hemisphere Additional Ozonesondes (SHADOZ) 19982000 tropical ozone climatology  

E-Print Network [OSTI]

ozone record from Paramaribo, Surinam (6°N, 55°W) (also in SHADOZ) shows a marked contrast to southern tropical ozone because Surinam is often north of the Intertropical Convergence Zone (ITCZ). A more

Thompson, Anne

83

The impact of interannual variability on multidecadal total ozone simulations  

E-Print Network [OSTI]

to reinforce the chemical ozone depletion caused by the enhanced aerosol loading following the eruption of Mt

Jackman, Charles H.

84

Ozone treatment in a closed culture system for Macrobrachium rosenbergii  

E-Print Network [OSTI]

constant flow of air. The Orthotoridine-Manganese Method (OTM) wss employed to measure ozone in solution (APHA, 1976) . Because of the rapid rate of decomposition of ozone in water, it was determined that the production of ozone could not be measured... by introducing into water and then sampling that water for analysis with OTM. Therefore, ozone was introduced directly into a solution of OTM reagent with subsequent changes in color of the reagent, measured on a "B & L Spectronic 70" spectrophotometer, being...

Yamaguchi, Ryoji

1978-01-01T23:59:59.000Z

85

Space Instrument Realization (ISR-5)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

5 Space Instrument Realization Providing expertise to support the design and fabrication of space-based custom instrumentation Contacts Group Leader Amy Regan Email Staff...

86

SIGNAL GROUPING FOR CONDITION MONITORING OF NUCLEAR POWER PLANT COMPONENTS  

E-Print Network [OSTI]

SIGNAL GROUPING FOR CONDITION MONITORING OF NUCLEAR POWER PLANT COMPONENTS Piero Baraldi Chevalier EDF R&D ­ Simulation and information Technologies for Power generation system Department 6, Quai Monitoring, Empirical Modeling, Power Plants, Safety Critical Nuclear Instrumentation, Autoassociative models

Paris-Sud XI, Université de

87

A study of the effect of ozone and antioxidants on ozone-sensitive loblolly pine  

E-Print Network [OSTI]

and exposed to LSX ambient ozone for two months. Arrows indicate pestained SDS-PAGE molecular weight standards (kD) and Rubisco large subunit. Lane R = pure spinach Rubisco large subunit. Lanes 1 and 2 = control seedlings in the Ozoban study. Lanes 3 and 4... radicals are produced during normal metabolism when oxygen is reduced to water. Grimes et al. (1983) studied the products that form from ozone in cells and found no detectable superoxide radicals, leading them to propose that either ozone or hydroxyl...

Posey, Karen Lashea

1995-01-01T23:59:59.000Z

88

Ozone determination in different copying centers  

E-Print Network [OSTI]

&ixicolr&gi 1st ed. , New York. Hemisphere Publishing Corp, 1 987, ppl35-13(? 12. Menzel, D. B. : Toxicity of Ozone, Oxygen and Radiation. AI111 Rev. of Pharmacol. 1970; 10: 37&)-394. 13. Menzel, D. B. : Ozone: An overview of its toxicity in m;in . in...-Threshold Limit Values for Chemi?;il Substances and Physical Agents in the Work Environm?ni 1991-1992. Cincinnati, Ohio: ACGIH 1991 24. Wadden, R. A. , and P. A. Scheff: /ndoor At't Pollt&ttr ii l si ?d New York: John Wiley & Sons, inc. , 1983, ppl-5. 25...

Lai, Chen-Fu

1993-01-01T23:59:59.000Z

89

Performance Monitoring  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Optimization Performance Monitoring Performance Monitoring A redirector page has been set up without anywhere to redirect to. Last edited: 2014-08-25 14:37:27...

90

Monitoring materials  

DOE Patents [OSTI]

The apparatus and method provide techniques for effectively implementing alpha and/or beta and/or gamma monitoring of items or locations as desired. Indirect alpha monitoring by detecting ions generated by alpha emissions, in conjunction with beta and/or gamma monitoring is provided. The invention additionally provides for screening of items prior to alpha monitoring using beta and/or gamma monitoring, so as to ensure that the alpha monitoring apparatus is not contaminated by proceeding direct to alpha monitoring of a heavily contaminated item or location. The invention provides additional versatility in the emission forms which can be monitored, whilst maintaining accuracy and avoiding inadvertent contamination.

Orr, Christopher Henry (Calderbridge, GB); Luff, Craig Janson (Calderbridge, GB); Dockray, Thomas (Calderbridge, GB); Macarthur, Duncan Whittemore (Los Alamos, NM)

2002-01-01T23:59:59.000Z

91

Instrument Technique Staff Assisted &  

E-Print Network [OSTI]

Nanophoton Raman 11 Raman Spectroscopy $150 $175 Newport Solar Simulator Solar Simulator $150 $175 Nicolet $175 CM Furnace Furnace $65 $120 CNT Furnace Furnace $65 $120 Desert Cryo Probe Station Probe Station will be added depending on your funding instrument or agreement. #12;Lead Furnace Furnace $65 $120 Lindberg 1

Braun, Paul

92

Nuclear conflict and ozone depletion Quick summary  

E-Print Network [OSTI]

Nuclear conflict and ozone depletion Quick summary o Regional nuclear war could cause global which traps pollutants o Nuclear weapons cause explosions, which then causes things around the vicinity to start burning, which in turn releases black carbon; it is not the nuclear material or fallout causing

Toohey, Darin W.

93

ARM - Instrumentation Workshop 2008  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc Documentation RUC : XDC documentationgovInstrumentstsigovInstrumentswsiFacilityInstrumentation

94

Retrieval of ozone and nitrogen dioxide concentrations from Stratospheric Aerosol and Gas Experiment III (SAGE III)  

E-Print Network [OSTI]

Retrieval of ozone and nitrogen dioxide concentrations from Stratospheric Aerosol and Gas extinction. We retrieve ozone and nitrogen dioxide number densities and aerosol extinction from transmission), Retrieval of ozone and nitrogen dioxide concentrations from Stratospheric Aerosol and Gas Experiment III

95

Satellite observations of ozone and nitrogen dioxide: from retrievals to emission estimates  

E-Print Network [OSTI]

Satellite observations of ozone and nitrogen dioxide: from retrievals to emission estimates #12 Satellite observations of ozone and nitrogen dioxide: from retrievals to emission es- timates / by Bas Subject headings: satellite retrieval / nitrogen dioxide / ozone / air pollution / emis- sion estimates

Haak, Hein

96

Application of gaseous disinfectants ozone and chlorine dioxide for inactivation of Bacillus subtilis spores  

E-Print Network [OSTI]

inhibitor line Ozone Generator Oxygen Concentrator CellSequal oxygen concentrator and Pure-O-Tech ozone generator.This oxygen is then supplied into the ozone generator for

Aydogan, Ahmet

2006-01-01T23:59:59.000Z

97

Ozone chemistry in the smoke from the Kuwait oil fires  

SciTech Connect (OSTI)

Ozone depletion occurred in the core of the plume of smoke from the Kuwait oil fires within 100 km of the fires, primarily in regions where NO{sub x} concentrations were high and ultraviolet flux was near zero. Rapid conversion of NO to NO{sub 2} can explain almost all of the ozone loss. Ozone was produced in diffuse regions of the plume, where the ultraviolet flux was higher than in the core. However, due to the relatively high ratio of nonmethane hydrocarbons to NO{sub x}, ozone production was slow. Since ozone was produced in a much larger volume than it was depleted, the plume as a whole was a source of ozone on a regional scale. 27 refs., 4 figs., 1 tab.

Herring, J.A.; Hobbs, P.V. [Univ. of Washington, Seattle, WA (United States)

1992-09-20T23:59:59.000Z

98

Ozone Removal by Filters Containing Activated Carbon: A Pilot Study  

SciTech Connect (OSTI)

This study evaluated the ozone removal performance of moderate-cost particle filters containing activated carbon when installed in a commercial building heating, ventilating, and air conditioning (HVAC) system. Filters containing 300 g of activated carbon per 0.09 m2 of filter face area were installed in two 'experimental' filter banks within an office building located in Sacramento, CA. The ozone removal performance of the filters was assessed through periodic measurements of ozone concentrations in the air upstream and downstream of the filters. Ozone concentrations were also measured upstream and downstream of a 'reference' filter bank containing filters without any activated carbon. The filter banks with prefilters containing activated carbon were removing 60percent to 70percent of the ozone 67 and 81 days after filter installation. In contrast, there was negligible ozone removal by the reference filter bank without activated carbon.

Fisk, William; Spears, Mike; Sullivan, Douglas; Mendell, Mark

2009-09-01T23:59:59.000Z

99

Comparative testing of slurry monitors  

SciTech Connect (OSTI)

The US Department of Energy (DOE) has millions of gallons of radioactive liquid and sludge wastes that must be retrieved from underground storage tanks, transferred to treatment facilities, and processed to a final waste form. The wastes will be removed from the current storage tanks by mobilizing the sludge wastes and mixing them with the liquid wastes to create slurries. Each slurry would then be transferred by pipeline to the desired destination. To reduce the risk of plugging a pipeline, the transport properties (e.g., density, suspended solids concentration, viscosity, particle size range) of the slurry should be determined to be within acceptable limits prior to transfer. These properties should also be monitored and controlled within specified limits while the slurry transfer is in progress. The DOE issued a call for proposals for developing on-line instrumentation to measure the transport properties of slurries. In response to the call for proposals, several researchers submitted proposals and were funded to develop slurry monitoring instruments. These newly developed DOE instruments are currently in the prototype stage. Before the instruments were installed in a radioactive application, the DOE wanted to evaluate them under nonradioactive conditions to determine if they were accurate, reliable, and dependable. The goal of this project was to test the performance of the newly developed DOE instruments along with several commercially available instruments. The baseline method for comparison utilized the results from grab-sample analyses.

Hylton, T.D.; Bayne, C.K. [Oak Ridge National Lab., TN (United States); Anderson, M.S. [Ames Lab., IA (United States); Van Essen, D.C. [Advanced Integrated Management Services, Inc., Oak Ridge, TN (United States)

1998-05-01T23:59:59.000Z

100

The Nearby Supernova Factory Ozone + Aerosol + Rayleigh  

E-Print Network [OSTI]

Rayleigh + Aerosol Extinction monitor filter Auxiliary Camera CCD Spectrograph picko ff mirror Umbra

Note: This page contains sample records for the topic "ozone monitoring instrument" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Assessing the local windfield with instrumentation  

SciTech Connect (OSTI)

This report concerns the development and testing of a technique for the initial screening and evaluation of potential sites for wind-energy conversion systems (WECS). The methodology was developed through a realistic siting exercise. The siting exercise involved measurements of winds along the surface and winds aloft using a relatively new instrument system, the Tethered Aerodynamic Lifting Anemometer (TALA) kite; notation of ecological factors such as vegetation flagging, soil erosion and site exposure, and verification of an area best suited for wind-energy development by establishing and maintaining a wind monitoring network. The siting exercise was carried out in an approximately 100-square-mile region of the Tehachapi Mountains of Southern California. The results showed that a comprehensive site survey involving field measurements, ecological survey, and wind-monitoring can be an effective tool for preliminary evaluation of WECS sites.

Zambrano, T.G.

1980-10-01T23:59:59.000Z

102

TMT Science and Instruments  

E-Print Network [OSTI]

To meet the scientific goals of the Thirty Meter Telescope Project, full diffraction-limited performance is required from the outset and hence the entire observatory is being designed, as a system, to achieve this. The preliminary design phases of the telescope and the first light adaptive optic facility are now approaching completion so that much better predictions of the system performance are possible. The telescope design and instrumentation are summarized in this presentation, with a brief description of some of the scientific programs that are foreseen.

David Crampton; Luc Simard; David Silva

2008-01-23T23:59:59.000Z

103

ARM - Site Instruments  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD) by Microtops AtmosphericApplication andAnthe Infrared LandSystemCentral FacilityInstruments SGP

104

ARM - Site Instruments  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD) by Microtops AtmosphericApplication andAnthe Infrared LandSystemCentral FacilityInstruments

105

ARM - Instrument Contacts  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation InInformation InExplosionAnnouncements MediagovCampaignsList ofgovInstrumentsContacts

106

ARM - Instrument Location Table  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation InInformation InExplosionAnnouncements MediagovCampaignsListgovInstrumentsLocation Table

107

ARM - RHUBC II Instruments  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc Documentation RUC :ProductsSCM Forcing Data DerivedInstruments Related Links RHUBC-II Home RHUBC

108

ARM - Recovery Act Instruments  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc Documentation RUC :ProductsSCM Forcing Data DerivedInstruments Related Links RelatedActRecovery

109

ARM - Site Instruments  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc Documentation RUC :ProductsSCM Forcing DataScience Questions Related Links AzoresInstruments

110

ARM - Site Instruments  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc Documentation RUC :ProductsSCM Forcing DataScience Questions RelatedInactiveInstruments NSA

111

ARM - Site Instruments  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc Documentation RUC :ProductsSCM Forcing DataScience Questions RelatedInactiveInstruments

112

ARM - Site Instruments  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc Documentation RUC :ProductsSCM Forcing DataScience QuestionsInactiveInstruments TWP Related

113

WNR Instrument Contacts  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption byAbout Printable Version Bookmark and WindArchivesInstrument

114

ARM - Instrument - 50rwp  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcal Documentation(AVIRIS) ProductsAirborneOctober 11, 2011 [FacilityIndiaGVAXAssociatedgovInstruments50rwp

115

RADIATION MONITORING  

E-Print Network [OSTI]

of Monitoring for Radiation Protection of Workers" in ICRPNo. 9, in "Advances in Radiation Protection and Dosimetry inDosimetry f o r Stray Radiation Monitoring on the CERN S i t

Thomas, R.H.

2010-01-01T23:59:59.000Z

116

airborne antarctic ozone: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

winter weather conditions: Severe cold and isolated air ow: circumpolar vortex North pole vortex breakdown replenishes ozone layer from outside: mixes air 12; E11;ects...

117

antarctic ozone recovery: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

winter weather conditions: Severe cold and isolated air ow: circumpolar vortex North pole vortex breakdown replenishes ozone layer from outside: mixes air 12; E11;ects...

118

antarctic ozone hole: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

winter weather conditions: Severe cold and isolated air ow: circumpolar vortex North pole vortex breakdown replenishes ozone layer from outside: mixes air 12; E11;ects...

119

antarctic ozone experiment: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

winter weather conditions: Severe cold and isolated air ow: circumpolar vortex North pole vortex breakdown replenishes ozone layer from outside: mixes air 12; E11;ects...

120

antarctic ozone depletion: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

winter weather conditions: Severe cold and isolated air ow: circumpolar vortex North pole vortex breakdown replenishes ozone layer from outside: mixes air 12; E11;ects...

Note: This page contains sample records for the topic "ozone monitoring instrument" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Exposure-Relevant Ozone Chemistry in Occupied Spaces  

E-Print Network [OSTI]

from the material balance on ozone (equation 4-1). S [O 3 ](equation 5-2, which reflects a steady-state material balance

Coleman, Beverly Kaye

2009-01-01T23:59:59.000Z

122

Ozone heating and the destabilization of traveling waves during summer  

SciTech Connect (OSTI)

The effects of ozone heating on the linear stability of lower stratospheric traveling waves of the summertime, extratropical circulation are examined. Based on coupled equations for the quasigeostrophic potential vorticity and ozone volume mixing ratio, it is shown that the diabatic heating arising from ozone advection can offset the damping due to Newtonian cooling, leading to wave amplification and significant changes in the structure and zonally rectified fluxes of the wave fields in both the lower stratosphere and troposphere. The vertical profile of the zonal mean wind plays a crucial role in determining whether the ozone heating destabilizes eastward and/or westward traveling disturbances.

Nathan, T.R.; Cordero, E.C.; Li, L. [Univ. of California, Davis, CA (United States)] [Univ. of California, Davis, CA (United States)

1994-07-01T23:59:59.000Z

123

The QUIET Instrument  

SciTech Connect (OSTI)

The Q/U Imaging ExperimenT (QUIET) is designed to measure polarization in the Cosmic Microwave Background, targeting the imprint of inflationary gravitational waves at large angular scales ({approx}1{sup o}). Between 2008 October and 2010 December, two independent receiver arrays were deployed sequentially on a 1.4m side-fed Dragonian telescope. The polarimeters which form the focal planes use a highly compact design based on High Electron Mobility Transistors (HEMTs) that provides simultaneous measurements of the Stokes parameters Q, U, and I in a single module. The 17-element Q-band polarimeter array, with a central frequency of 43.1 GHz, has the best sensitivity (69 {mu}Ks{sup 1/2}) and the lowest instrumental systematic errors ever achieved in this band, contributing to the tensor-to-scalar ratio at r < 0:1. The 84-element W-band polarimeter array has a sensitivity of 87 {mu}Ks{sup 1/2} at a central frequency of 94.5 GHz. It has the lowest systematic errors to date, contributing at r < 0:01. The two arrays together cover multipoles in the range {ell} {approx} 25 -- 975. These are the largest HEMT-based arrays deployed to date. This article describes the design, calibration, performance of, and sources of systematic error for the instrument.

Bischoff, C.; et al.

2012-07-01T23:59:59.000Z

124

E-Print Network 3.0 - ambient ozone levels Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

level ozone. Lesson 2: Ozone Formation... , power plants and industry all emit air pollution that forms ... Source: Royer, Dana - Department of Earth and Environmental Sciences,...

125

E-Print Network 3.0 - ash ozonation technology Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ozonation technology Search Powered by Explorit Topic List Advanced Search Sample search results for: ash ozonation technology Page: << < 1 2 3 4 5 > >> 1 Fine volcanic Predicting...

126

E-Print Network 3.0 - ambient ozone growth Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Climate and Environment (Climate) Impacts of ozone on trees and crops Summary: and carbon sequestration. Vegetation exposure to ozone reduces photosynthesis, growth, and...

127

Identification, Model Updating, and Response Prediction of an Instrumented 15-Story Steel-Frame Building  

E-Print Network [OSTI]

A. , 1998. Ductile Design of Steel Structure, McGraw Hill,monitoring of the steel-frame UCLA Factor Building,an Instrumented 15-Story Steel-Frame Building Derek Skolnik,

Skolnik, Derek; Lei, Ying; Yu, Eunjong; Wallace, J W

2006-01-01T23:59:59.000Z

128

The MICE PID Instrumentation  

E-Print Network [OSTI]

The international Muon Ionization Cooling Experiment (MICE) will carry out a systematic investigation of ionization cooling of a muon beam. As the emittance measurement will be done on a particle-by-particle basis, sophisticated beam instrumentation is needed to measure particle coordinates and timing vs RF. A PID system based on three time-of-flight stations, two Aerogel Cerenkov detectors and a KLOE-like calorimeter has been constructed in order to keep beam contamination ($e, \\pi$) well below 1%. The MICE time-of-flight system will measure timing with a resolution better than 70 ps per plane, in a harsh environment due to high particle rates, fringe magnetic fields and electron backgrounds from RF dark current.

M. Bonesini

2008-10-02T23:59:59.000Z

129

The MICE PID Instrumentation  

E-Print Network [OSTI]

The international Muon Ionization Cooling Experiment (MICE) will carry out a systematic investigation of ionization cooling of a muon beam. As the emittance measurement will be done on a particle-by-particle basis, sophisticated beam instrumentation is needed to measure particle coordinates and timing vs RF. A PID system based on three time-of-flight stations, two Aerogel Cerenkov detectors and a KLOE-like calorimeter has been constructed in order to keep beam contamination ($e, \\pi$) well below 1%. The MICE time-of-flight system will measure timing with a resolution better than 70 ps per plane, in a harsh environment due to high particle rates, fringe magnetic fields and electron backgrounds from RF dark current.

Bonesini, M

2008-01-01T23:59:59.000Z

130

A SURVEY OF INSTRUMENTATION USED FOR MONITORING METALS IN WATER  

E-Print Network [OSTI]

AD) X-ray Fluorescence Spectrometry (XRF) Neutron ActivationIn a wavelength. -dispersive XRF spectrometer, the spectrumadvmltages to energy- dispersive XRF are its ability to make

Quinby-Hunt, M.S.

2011-01-01T23:59:59.000Z

131

A SURVEY OF INSTRUMENTATION USED FOR MONITORING METALS IN WATER  

E-Print Network [OSTI]

diagram of an atomic absorption spectrometer. SimplifiedTrace Analysis by Atomic Absorption Spectroscopy and Anodicin Table 1. They are atomic absorption spectroscopy, botl1

Quinby-Hunt, M.S.

2011-01-01T23:59:59.000Z

132

DOE Announces Webinars on Instrumentation for Monitoring Marine...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

typically required. You can also watch archived webinars and browse previously aired videos, slides, and transcripts. Upcoming Webinars January 23: Live Webinar on...

133

DOE Announces Webinars on Instrumentation for Monitoring Marine Renewable  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana. DOCUMENTS AVAILABLEReportEnergy EfficiencyDavis-Bacon Act

134

An Instrument to Monitor the WBand Temperature of the Sky  

E-Print Network [OSTI]

a framework for the design of the chopper circuit, as used in his experimental project of this past October. This is equivalent to making the telescope declination equal to the local colatitude of 49.608 0 . The beam are made difficult by atmospheric interference, particularly very bright rotational­vibrational lines from

135

Raciometry J. W. Griffin, Technical Monitor ARM Instrument Development Program  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298, and 323 RS-PO-0001-001.doc RadiationI:RachelRachnaJ.

136

ORIGINAL CONTRIBUTION Ozone and Short-term Mortality  

E-Print Network [OSTI]

. With the National Morbidity, Mortality, and Air Pollution Study (NMMAPS), we have developed na- tional approaches Ambient Air Qual- ity Standard (NAAQS) for ozone, adding a daily maximum 8-hour stan- dard of 80 ppb.19 Because of the relevance of epidemiologic evi- dence to the NAAQS for ozone and other pollutants

Dominici, Francesca

137

Atmospheric Environment 41 (2007) 31513160 Ozone removal by HVAC filters  

E-Print Network [OSTI]

Atmospheric Environment 41 (2007) 3151­3160 Ozone removal by HVAC filters P. Zhao, J.A. Siegel�, R May 2006; accepted 14 June 2006 Abstract Residential and commercial HVAC filters that have been loaded of the relative importance of HVAC filters as a removal mechanism for ozone in residential and commercial

Siegel, Jeffrey

138

Proceedings: Indoor Air 2005 OZONE REMOVAL BY RESIDENTIAL HVAC FILTERS  

E-Print Network [OSTI]

Proceedings: Indoor Air 2005 2366 OZONE REMOVAL BY RESIDENTIAL HVAC FILTERS P Zhao1,2 , JA Siegel1, Austin, Texas 78758, USA ABSTRACT HVAC filters have a significant influence on indoor air quality% for Filter #2 at a face velocity of 0.81 cm/s. The potential for HVAC filters to affect ozone concentrations

Siegel, Jeffrey

139

In-Situ Monitoring of Trace Gases in a Non-Urban Environment  

SciTech Connect (OSTI)

A set of commercial instruments measuring carbon monoxide (CO), ozone (O3), sulfur dioxide (SO2), and nitrogen oxides [nitric oxide (NO), nitrogen dioxide (NO2), and odd nitrogens (NOX)] was integrated and deployed in a non–urban environment. The deployment occurred between July 2, 2007 and August 7, 2007 in Richland, WA. The mixing ratios of all species were lower than in most rural–suburban environments, and strong diurnal patterns were observed. NO2 was depleted by photochemically formed ozone during the day and replenished at night as ozone was destroyed. The highest ozone concentration during these episodes was 45 ppb. The overall average was 15 ppb with readings approaching near zero at times. This observation is low compared to average daytime summer readings of 60–80 ppb in highly populated and industrialized urban areas in the Pacific Northwest region. Back?trajectory analysis and prevailing weather conditions both indicated that much of the ozone was transported locally or was produced in–situ. Analysis of SO2 as a tracer for O3 advection further indicated lack of long–range regional transport of pollutants to Richland. We also present results of analysis of high ozone episodes and comparisons relative to other areas in the Pacific Northwest region. These results provide a useful sample data set to study the historical record of air quality in rural Eastern Washington.

Mioduszewski, John R.; Yu, Xiao-Ying; Morris, Victor R.; Berkowitz, Carl M.; Flaherty, Julia E.

2011-01-01T23:59:59.000Z

140

Effects of 20002050 changes in climate and emissions on global tropospheric ozone and the policy-relevant background surface ozone  

E-Print Network [OSTI]

) project major changes in anthro- pogenic emissions of greenhouse gases and ozone precur- sors over the 2Effects of 2000­2050 changes in climate and emissions on global tropospheric ozone and the policy; published 27 September 2008. [1] We use a global chemical transport model (GEOS-Chem) driven by a general

Mickley, Loretta J.

Note: This page contains sample records for the topic "ozone monitoring instrument" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Proceedings: Indoor Air 2005 REACTIONS BETWEEN OZONE AND BUILDING PRODUCTS: IMPACT ON  

E-Print Network [OSTI]

Proceedings: Indoor Air 2005 2118 REACTIONS BETWEEN OZONE AND BUILDING PRODUCTS: IMPACT ON PRIMARY of reactions of ozone on building products and on their emissions in indoor air. For this purpose, 12 building products were exposed to ozone in a dedicated experimental setup. The measured ozone removal rate

Paris-Sud XI, Université de

142

Ozone ensemble forecast with machine learning Vivien Mallet,1,2  

E-Print Network [OSTI]

Ozone ensemble forecast with machine learning algorithms Vivien Mallet,1,2 Gilles Stoltz,3 forecasts. The latter rely on a multimodel ensemble built for ozone forecasting with the modeling system Europe in order to forecast ozone daily peaks and ozone hourly concentrations. On the basis of past

Paris-Sud XI, Université de

143

Ambient Radon-222 Monitoring in Amargosa Valley, Nevada  

SciTech Connect (OSTI)

As part of a program to characterize and baseline selected environmental parameters in the region around the proposed repository at Yucca Mountain, Nevada, ambient radon-222 monitoring was conducted in the rural community of Amargosa Valley, the community closest to the proposed repository site. Passive integrating radon monitors and a continuous radon monitoring instrument were deployed adjacent to the Community Environmental Monitoring Program (CEMP) (http://www.cemp.dri.edu/index.html) station located in the Amargosa Valley Community Center near the library. The CEMP station provided real-time ambient gamma exposure and meteorological data used to correct the integrated radon measurements as well as verify meteorological data collected by the continuous radon monitoring instrument. Additionally, different types of environmental enclosures that housed the monitors and instrument were used to determine if particular designs influenced the ambient radon measurements.

L.H. Karr; J.J. Tappen; D. Shafer; K.J. Gray

2008-06-05T23:59:59.000Z

144

Evaluation of microporous carbon filters as catalysts for ozone decomposition  

SciTech Connect (OSTI)

Ozone is produced in small quantities in photocopiers and laser printers in the workplace and large quantities in industrial waste water treatment facilities. Carbon filters are commonly used to decompose this unwanted ozone. The three most important factors in producing a filter for this purpose are flow properties, efficiency, and cost. Most ozone decomposition applications require very low back-pressure at modest flow rates. The tradeoff between the number of pores and the size of the pores will be discussed. Typical unfiltered emissions in the workplace are approximately 1 ppm. The maximum permissible exposure limit, PEL, for worker exposure to ozone is 0.1 ppm over 8 hours. Several methods have been examined to increase the efficiency of ozone decomposition. Carbon surfaces were modified with catalysts, the surface activated, and the surface area was increased, in attempts to decompose ozone more effectively. Methods to reduce both the processing and raw material costs were investigated. Several sources of microporous carbon were investigated as ozone decomposition catalysts. Cheaper processing routes including macropore templating, faster drying and extracting methods were also studied.

Whinnery, L.; Coutts, D.; Shen, C.; Adams, R. [Sandia National Labs., Livermore, CA (United States); Quintana, C.; Showalter, S. [Sandia National Labs., Albuquerque, NM (United States)

1994-12-31T23:59:59.000Z

145

Ozone generation by rock fracture: Earthquake early warning?  

SciTech Connect (OSTI)

We report the production of up to 10 ppm ozone during crushing and grinding of typical terrestrial crust rocks in air, O{sub 2} and CO{sub 2} at atmospheric pressure, but not in helium or nitrogen. Ozone is formed by exoelectrons emitted by high electric fields, resulting from charge separation during fracture. The results suggest that ground level ozone produced by rock fracture, besides its potential health hazard, can be used for early warning in earthquakes and other catastrophes, such as landslides or land shifts in excavation tunnels and underground mines.

Baragiola, Raul A.; Dukes, Catherine A.; Hedges, Dawn [Engineering Physics, University of Virginia, Charlottesville, Virginia 22904 (United States)

2011-11-14T23:59:59.000Z

146

Electrostatic monitoring  

DOE Patents [OSTI]

The apparatus and method provide a technique for more simply measuring alpha and/or beta emissions arising from items or locations. The technique uses indirect monitoring of the emissions by detecting ions generated by the emissions, the ions being attracted electrostatically to electrodes for discharge of collection. The apparatus and method employ a chamber which is sealed around the item or location during monitoring with no air being drawn into or expelled from the chamber during the monitoring process. A simplified structure and operations arises as a result, but without impairing the efficiency and accuracy of the detection technique.

Orr, Christopher Henry (Cumbria, GB); Luff, Craig Janson (Cumbria, GB); Dockray, Thomas (Cumbria, GB); Macarthur, Duncan Whittemore (Los Alamos, NM)

2001-01-01T23:59:59.000Z

147

CitiSense Adaptive Services for Community-Driven Behavioral and Environmental Monitoring to Induce  

E-Print Network [OSTI]

times nor at equal risk for asthma or other harmful consequences of air pollution. What if everyday RI³FLWL]HQ LQIUDVWUXFWXUH´ for the monitoring of pollution and environmental conditions that users by users, data about pollutants such as ozone and carbon monoxide is collected and used to provide real

Simunic, Tajana

148

Research Report Hedonic and Instrumental  

E-Print Network [OSTI]

Mitchell,1 and James J. Gross2 1 Boston College and 2 Stanford University ABSTRACT--What motivates, & Rodriguez, 1989). Such instrumental motives might play a role in the regulation of emotion (Parrott, 1993

Gross, James J.

149

Departmental Business Instrument Numbering System  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To prescribe procedures for assigning identifying numbers to all Department of Energy (DOE), including the National Nuclear Security Administration, business instruments. Cancels DOE 1331.2B. Canceled by DOE O 540.1A.

2000-12-05T23:59:59.000Z

150

Departmental Business Instrument Numbering System  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The Order prescribes the procedures for assigning identifying numbers to all Department of Energy (DOE) and National Nuclear Security Administration (NNSA) business instruments. Cancels DOE O 540.1. Canceled by DOE O 540.1B.

2005-01-27T23:59:59.000Z

151

Attosecond electronic and nuclear quantum photodynamics of the ozone molecule  

SciTech Connect (OSTI)

Coupled electron-nuclear dynamics simulations are investigated for the ozone molecule on the attosecond time scale. The initial wavepacket is pumped as a coherent superposition of two or three electronic states.

Halász, G. J. [Department of Information Technology, University of Debrecen, H-4010 Debrecen, PO Box 12 (Hungary)] [Department of Information Technology, University of Debrecen, H-4010 Debrecen, PO Box 12 (Hungary); Perveaux, A.; Lasorne, B.; Gatti, F. [CTMM, Institut Charles Gerhardt Montpellier, F-34095 Montpellier Cedex 5 (France)] [CTMM, Institut Charles Gerhardt Montpellier, F-34095 Montpellier Cedex 5 (France); Robb, M. A. [Imperial College London, Department of Chemistry, London SW7 2AZ (United Kingdom)] [Imperial College London, Department of Chemistry, London SW7 2AZ (United Kingdom); Vibók, Á. [Department of Theoretical Physics, University of Debrecen, H-40410 Debrecen, PO Box 5 (Hungary)] [Department of Theoretical Physics, University of Debrecen, H-40410 Debrecen, PO Box 5 (Hungary)

2013-11-13T23:59:59.000Z

152

Global Health and Economic Impacts of Future Ozone Pollution  

E-Print Network [OSTI]

We assess the human health and economic impacts of projected 2000-2050 changes in ozone pollution using the MIT Emissions Prediction and Policy Analysis-Health Effects (EPPA-HE) model, in combination with results from the ...

Webster, Mort D.

153

Introduction to continuous emission monitoring programs. Final report  

SciTech Connect (OSTI)

This document provides a general introduction to continuous emission monitoring for those persons not previously involved in this field. Information is presented on continuous opacity monitoring, as well as instrumental and alternative monitoring techniques for SO2 and NOx (i.e., continuous wet-chemical measurement methods and fuel sampling and analysis methods). This document presents an outline and review of the fundamental concepts, terminology, and procedures used in a continuous emission monitoring program. Also presented are selected technical details necessary to understand the operation of emission monitors, the use of continuous emission monitoring data by air pollution control agencies, and references to other available documents which provide additional information.

Peeler, J.W.

1983-01-01T23:59:59.000Z

154

The role of ozone in tracheal cell transformation  

SciTech Connect (OSTI)

This project examined the potential role of ozone as a respiratory carcinogen by characterizing its ability to induce or modulate the preneoplastic transformation of rat tracheal epithelial cells. The chemical reactivity of ozone and the types of damage it can cause suggest that it may have a role in environmental carcinogenesis. Few other studies have examined the direct cytotoxic or transforming effects of ozone after in vivo or in vitro exposure of cells, and no studies have been reported on the comparative effects of ozone on respiratory cells exposed in vivo or in vitro. The induction of early preneoplastic changes in populations of rat tracheal epithelial cells by carcinogens can be detected and quantified in vitro after exposures in vivo or in vitro of tracheal epithelial cells. This cell culture and transformation system was used to characterize the transforming potency of ozone. Tracheal epithelial cells were isolated from Fischer-344/N rats that had been exposed for six hours per day, five days per week for one, two, or four weeks to 0, 0.12, 0.5, or 1.0 parts per million (ppm)* ozone (sea-level equivalents). Cell populations were examined in culture for increases in the frequency of preneoplastic variants. Rats exposed to ozone did not exhibit an increase in the frequency of preneoplastic tracheal cells, although exposed tracheas did exhibit dose-dependent morphological changes. Rat tracheal epithelial cells were given single, 40-minute in vitro exposures to concentrations of ozone that did not result in any detectable decrease in colony-forming efficiency.

Thomassen, D.G.; Harkema, J.R.; Sun, J.D.; Stephens, N.D.; Griffith, W.C. (Inhalation Toxicology Research Institute, Lovelace Biomedical and Environmental Research Institute, Albuquerque, NM (United States))

1992-04-01T23:59:59.000Z

155

Monitoring Infrastructure Capacity Monitoring Infrastructure Capacity  

E-Print Network [OSTI]

Levinson, D. (2000) Monitoring Infrastructure Capacity p. 165-181 in Land Market Monitoring for Smart Urban) task. Monitoring infrastructure capacity is at least as complex as monitoring urban land markets Levinson, D. (2000) Monitoring Infrastructure Capacity p. 165-181 in Land Market Monitoring for Smart Urban

Levinson, David M.

156

Deer monitoring at the Savannah River Site  

SciTech Connect (OSTI)

To protect public health, all deer and feral hogs harvested at the Savannah River Site (SRS) during controlled hunts are monitored for Cs-137. A new monitoring program has been developed by the Environmental Monitoring Section (EMS). To provide increased confidence in dose data and compliance with regulations, many changes have been made to the deer and hog monitoring program. Using field count information, a computerized database determines Cs-137 concentration and calculates the committed effective dose equivalent (CEDE) resulting from consumption of the animal. The database then updates each hunter's cumulative CEDE in real time. Also, enhancements to the instrument calibration and quality control portions of the monitoring program were implemented. These include improved monitor calibration, intercomparison of field results from the same animal using different detectors, and regular use of check sources to verify equipment performance. With these program changes, EMS can produce more accurate and verifiable dose data.

Fledderman, P.D.

1992-01-01T23:59:59.000Z

157

Deer monitoring at the Savannah River Site  

SciTech Connect (OSTI)

To protect public health, all deer and feral hogs harvested at the Savannah River Site (SRS) during controlled hunts are monitored for Cs-137. A new monitoring program has been developed by the Environmental Monitoring Section (EMS). To provide increased confidence in dose data and compliance with regulations, many changes have been made to the deer and hog monitoring program. Using field count information, a computerized database determines Cs-137 concentration and calculates the committed effective dose equivalent (CEDE) resulting from consumption of the animal. The database then updates each hunter`s cumulative CEDE in real time. Also, enhancements to the instrument calibration and quality control portions of the monitoring program were implemented. These include improved monitor calibration, intercomparison of field results from the same animal using different detectors, and regular use of check sources to verify equipment performance. With these program changes, EMS can produce more accurate and verifiable dose data.

Fledderman, P.D.

1992-10-01T23:59:59.000Z

158

Readiness Issues for Emergency Response Instrumentation  

SciTech Connect (OSTI)

Issues in maintaining readiness of instruments for deployment and use in emergency response situation often differ from those in maintaining instruments for normal operations. Confunding circumstances include use of non-availability of check sources, ensuring instruments are always in calibration and operable, possible use of instruments in different climates, packaging of instrumentation for deployment, transport of instrumentation and check sources, and ensuring users are familiar with instruments. Methods and procedures for addressing these issues are presented. Instrumentation used for survey, in situ measurements, electronic dosimetry, and air conditioning are discussed.

C.A. Riland; D.R. Bowman; R.J. Tighe

1999-03-01T23:59:59.000Z

159

Monitoring well  

DOE Patents [OSTI]

The present invention relates to a monitoring well which includes an enclosure defining a cavity and a water reservoir enclosed within the cavity and wherein the reservoir has an inlet and an outlet. The monitoring well further includes a porous housing borne by the enclosure and which defines a fluid chamber which is oriented in fluid communication with the outlet of the reservoir, and wherein the porous housing is positioned in an earthen soil location below-grade. A geophysical monitoring device is provided and mounted in sensing relation relative to the fluid chamber of the porous housing; and a coupler is selectively moveable relative to the outlet of reservoir to couple the porous housing and water reservoir in fluid communication. An actuator is coupled in force transmitting relation relative to the coupler to selectively position the coupler in a location to allow fluid communication between the reservoir and the fluid chamber defined by the porous housing.

Hubbell, Joel M. (Idaho Falls, ID); Sisson, James B. (Idaho Falls, ID)

2002-01-01T23:59:59.000Z

160

Stack Monitor Operating Experience Review  

SciTech Connect (OSTI)

Stack monitors are used to sense radioactive particulates and gases in effluent air being vented from rooms of nuclear facilities. These monitors record the levels and types of effluents to the environment. This paper presents the results of a stack monitor operating experience review of the U.S. Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS) database records from the past 18 years. Regulations regarding these monitors are briefly described. Operating experiences reported by the U.S. DOE and in engineering literature sources were reviewed to determine the strengths and weaknesses of these monitors. Electrical faults, radiation instrumentation faults, and human errors are the three leading causes of failures. A representative “all modes” failure rate is 1E-04/hr. Repair time estimates vary from an average repair time of 17.5 hours (with spare parts on hand) to 160 hours (without spare parts on hand). These data should support the use of stack monitors in any nuclear facility, including the National Ignition Facility and the international ITER project.

L. C. Cadwallader; S. A. Bruyere

2009-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "ozone monitoring instrument" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Proceedings of Healthy Buildings 2009 Paper 141 Removal of Indoor Ozone with Reactive Materials: Preliminary Results and  

E-Print Network [OSTI]

Proceedings of Healthy Buildings 2009 Paper 141 Removal of Indoor Ozone with Reactive Materials air quality. #12;Proceedings of Healthy Buildings 2009 Paper 141 Removing ozone from indoor

Siegel, Jeffrey

162

Monitoring well  

DOE Patents [OSTI]

A monitoring well including a conduit defining a passageway, the conduit having a proximal and opposite, distal end; a coupler connected in fluid flowing relationship with the passageway; and a porous housing borne by the coupler and connected in fluid flowing relation thereto.

Hubbell, Joel M. (Idaho Falls, ID); Sisson, James B. (Idaho Falls, ID)

1999-01-01T23:59:59.000Z

163

Monitoring well  

DOE Patents [OSTI]

A monitoring well is described which includes: a conduit defining a passageway, the conduit having a proximal and opposite, distal end; a coupler connected in fluid flowing relationship with the passageway; and a porous housing borne by the coupler and connected in fluid flowing relation thereto. 8 figs.

Hubbell, J.M.; Sisson, J.B.

1999-06-29T23:59:59.000Z

164

Acoustic emission monitoring of HFIR vessel during hydrostatic testing  

SciTech Connect (OSTI)

This report discusses the results and conclusions reached from applying acoustic emission monitoring to surveillance of the High Flux Isotope Reactor vessel during pressure testing. The objective of the monitoring was to detect crack growth and/or fluid leakage should it occur during the pressure test. The report addresses the approach, acoustic emission instrumentation, installation, calibration, and test results.

Friesel, M.A.; Dawson, J.F.

1992-08-01T23:59:59.000Z

165

Effectiveness Monitoring Report, MWMF Tritium Phytoremediation Interim Measures.  

SciTech Connect (OSTI)

This report describes and presents the results of monitoring activities during irrigation operations for the calendar year 2001 of the MWMF Interim Measures Tritium Phytoremediation Project. The purpose of this effectiveness monitoring report is to provide the information on instrument performance, analysis of CY2001 measurements, and critical relationships needed to manage irrigation operations, estimate efficiency and validate the water and tritium balance model.

Hitchcock, Dan; Blake, John, I.

2003-02-10T23:59:59.000Z

166

International Conference Synchrotron Radiation Instrumentation SRI `94  

SciTech Connect (OSTI)

This report contains abstracts for the international conference on Synchrotron Radiation Instrumentation at Brookhaven National Laboratory.

Not Available

1994-10-01T23:59:59.000Z

167

Comparison of three vertically resolved ozone data sets: climatology, trends and radiative forcings  

E-Print Network [OSTI]

Climate models that do not simulate changes in stratospheric ozone concentrations require the prescription of ozone fields to accurately calculate UV fluxes and stratospheric heating rates. In this study, three different ...

Hassler, B.

168

Atmospheric Environment 38 (2004) 14251436 A development of ozone abatement strategies for the Grenoble  

E-Print Network [OSTI]

Atmospheric Environment 38 (2004) 1425­1436 A development of ozone abatement strategies are generated in the Grenoble plume. For developing ozone abatement strategies it is important to know whether

169

A delayed effect of ozone fumigation on photosynthesis of Norway spruce  

E-Print Network [OSTI]

A delayed effect of ozone fumigation on photosynthesis of Norway spruce D. Eamus1 A.W. Davis J into the long-lastincl effects of ozone fumiga- tion upon photosynthesis of Norway spruce. Measurements were

Paris-Sud XI, Université de

170

E-Print Network 3.0 - acute ozone-induced change Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Abstract Predicting ozone-induced reduction of carbon... a leaf-level model to the whole tree, it is possible to investigate whether the ozone-induced ... Source: Michigan...

171

Examination of the Effects of Sea Salt Aerosols on Southeast Texas Ozone and Secondary Organic Aerosol  

E-Print Network [OSTI]

such as ozone, reactive nitrogen, mercury, and sulfur containing compounds. Urban areas are most impacted by these trace gases, which is a concern because ozone especially affects the health of citizens. Experiments have three basic parts. First we generate mono...

Benoit, Mark David

2013-02-06T23:59:59.000Z

172

Pilot Scale Study of Excess Sludge Production Reduction in Wastewater Treatment by Ozone  

E-Print Network [OSTI]

Pilot Scale Study of Excess Sludge Production Reduction in Wastewater Treatment by Ozone Yuan Ma-scale reactors were operated at the LaPrairie Wastewater Treatment plant (one control and one ozonated

Barthelat, Francois

173

E-Print Network 3.0 - acid regulates ozone-induced Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ozone-induced Search Powered by Explorit Topic List Advanced Search Sample search results for: acid regulates ozone-induced Page: << < 1 2 3 4 5 > >> 1 Plant Molecular Biology 51:...

174

Meteorological Simulations of Ozone Episode Case Days during the 1996 Paso del Norte Ozone Study  

SciTech Connect (OSTI)

Meteorological simulations centered around the border cities of El Paso and Ciudad Juarez have been performed during an ozone episode that occurred on Aug. 13,1996 during the 1996 Paso del Norte Ozone Study field campaign. Simulations were petiormed using the HOTMAC mesoscale meteorological model using a 1,2,4, and 8 km horizontal grid size nested mesh system. Investigation of the vertical structure and evolution of the atmospheric boundary layer for the Aug. 11-13 time period is emphasized in this paper. Comparison of model-produced wind speed profiles to rawirisonde and radar profiler measurements shows reasonable agreement. A persistent upper-level jet was captured in the model simulations through data assimilation. In the evening hours, the model was not able to produce the strong wind direction shear seen in the radar wind profiles. Based on virtual potential temperature profile comparisons, the model appears to correctly simulate the daytime growth of the convective mixed layer. However, the model underestimates the cooling of the surface layer at night. We found that the upper-level jet significantly impacted the turbulence structure of the boundary layer, leading to relatively high turbulent kinetic energy (tke) values aloft at night. The model indicates that these high tke values aloft enhance the mid-morning growth of the boundary layer. No upper-level turbulence measurements were available to verify this finding, however. Radar profiler-derived mixing heights do indicate relatively rapid morning growth of the mixed layer.

Brown, M.J.; Costigan, K.; Muller, C.; Wang, G.

1999-02-01T23:59:59.000Z

175

ACRF Instrumentation Status and Information - June 2009  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

JW Voyles

2009-06-01T23:59:59.000Z

176

ACRF Instrumentation Status and Information September 2009  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

JW Voyles

2009-10-01T23:59:59.000Z

177

ACRF Instrumentation Status and Information July 2009  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

JW Voyles

2009-08-13T23:59:59.000Z

178

ACRF Instrumentation Status and Information April 2009  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

JW Voyles

2009-05-07T23:59:59.000Z

179

ACRF Instrumentation Status and Information August 2009  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

JW Voyles

2009-09-09T23:59:59.000Z

180

ACRF Instrumentation Status and Information May 2009  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

JW Voyles

2009-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "ozone monitoring instrument" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Instrumentation  

E-Print Network [OSTI]

indicate the following results. (i) Fair agreement is obtained with the theory of Stine and Wanlass 2 at

J. Picken; B. Sc; R. Harmer; J. Picken; B. Sc; R. Harmer; A Nol

1958-01-01T23:59:59.000Z

182

Site Monitoring Area Maps  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

to the Site Monitoring Area (SMA) The Site Monitoring Area sampler Control measures (best management practices) installed at the Site Monitoring Area Structures such as...

183

1 Ozone pollution forecasting 3 Herve Cardot, Christophe Crambes and Pascal Sarda.  

E-Print Network [OSTI]

Contents 1 Ozone pollution forecasting 3 Herv´e Cardot, Christophe Crambes and Pascal Sarda. 1;1 Ozone pollution forecasting using conditional mean and conditional quantiles with functional covariates Herv´e Cardot, Christophe Crambes and Pascal Sarda. 1.1 Introduction Prediction of Ozone pollution

Crambes, Christophe

184

DOE-EPRI On-Line Monitoring Implementation Guidelines  

SciTech Connect (OSTI)

Industry and EPRI experience at several plants has shown on-line monitoring to be very effective in identifying out-of-calibration instrument channels or indications of equipment-degradation problems. The EPRI implementation project for on-line monitoring has demonstrated the feasability of on-line monitoring at several participating nuclear plants. The results have been very enouraging, and substantial progress is anticipated in the coming years.

E. Davis, R. Bickford

2003-01-02T23:59:59.000Z

185

DOE-EPRI On-Line Monitoring Implementation Guidelines  

SciTech Connect (OSTI)

OAK B139 Industry and EPRI experience at several plants has shown on-line monitoring to be very effective in identifying out-of-calibration instrument channels or indications of equipment-degradation problems. The EPRI implementation project for on-line monitoring has demonstrated the feasibility of on-line monitoring at several participating nuclear plants. The results have been very encouraging, and substantial progress is anticipated in the coming years.

E. Davis; R. Bickford

2003-01-02T23:59:59.000Z

186

Instrumentation and Controls Division progress report, September 1, 1980-July 1, 1982  

SciTech Connect (OSTI)

Activities are reported by the Reactor Systems Section, Research Instrument Section, and the Measurement and Controls Engineering Section. Reactor system activities include dynamic analysis, survillanc and diagnostic methods, design and evaluation, detectors, facilities support, process instrumentation development, and special assignments. Activities in the Research Instrument Section include the Navy-ORNL RADIAC development program, advanced ..gamma.. and x ray detector systems, neutron detection and subcriticality measurements, circuit development, position-sensitive detectors, stand-alone computers, environmental monitoring-detectors and systems, plant security, engineering support for fusion energy division, engineering support for accelerator physics, and communications: radio, closed-circuit tv, and computer. Activities in the Measurement and Controls Engineering Section include the AVLIS program; gas centrifuge enrichment technology support; Advanced Instrumentation for Reflood Studies (AIDRS) program; instrumentation development support for fuel reprocessing; in-core experiments and reactor systems; energy, conservation, and electric power systems; computer systems; measurements research; and fossil energy studies Publications are listed. (WHK)

Klobe, L.E.E. (ed.)

1982-12-01T23:59:59.000Z

187

Ozone induces glucose intolerance and systemic metabolic effects in young and aged brown Norway rats  

SciTech Connect (OSTI)

Air pollutants have been associated with increased diabetes in humans. We hypothesized that ozone would impair glucose homeostasis by altering insulin signaling and/or endoplasmic reticular (ER) stress in young and aged rats. One, 4, 12, and 24 month old Brown Norway (BN) rats were exposed to air or ozone, 0.25 or 1.0 ppm, 6 h/day for 2 days (acute) or 2 d/week for 13 weeks (subchronic). Additionally, 4 month old rats were exposed to air or 1.0 ppm ozone, 6 h/day for 1 or 2 days (time-course). Glucose tolerance tests (GTT) were performed immediately after exposure. Serum and tissue biomarkers were analyzed 18 h after final ozone for acute and subchronic studies, and immediately after each day of exposure in the time-course study. Age-related glucose intolerance and increases in metabolic biomarkers were apparent at baseline. Acute ozone caused hyperglycemia and glucose intolerance in rats of all ages. Ozone-induced glucose intolerance was reduced in rats exposed for 13 weeks. Acute, but not subchronic ozone increased ?{sub 2}-macroglobulin, adiponectin and osteopontin. Time-course analysis indicated glucose intolerance at days 1 and 2 (2 > 1), and a recovery 18 h post ozone. Leptin increased day 1 and epinephrine at all times after ozone. Ozone tended to decrease phosphorylated insulin receptor substrate-1 in liver and adipose tissues. ER stress appeared to be the consequence of ozone induced acute metabolic impairment since transcriptional markers of ER stress increased only after 2 days of ozone. In conclusion, acute ozone exposure induces marked systemic metabolic impairments in BN rats of all ages, likely through sympathetic stimulation. - Highlights: • Air pollutants have been associated with increased diabetes in humans. • Acute ozone exposure produces profound metabolic alterations in rats. • Age influences metabolic risk factors in aging BN rats. • Acute metabolic effects are reversible and repeated exposure reduces these effects. • Ozone metabolic effects are only slightly exacerbated in geriatric rats.

Bass, V. [Environmental Public Health Division, National Health and Environmental Effects Research Laboratory, U.S. Environmental Protection Agency, Research Triangle Park, NC (United States); Gordon, C.J.; Jarema, K.A.; MacPhail, R.C. [Toxicity Assessment Division, National Health and Environmental Effects Research Laboratory, U.S. Environmental Protection Agency, Research Triangle Park, NC (United States); Cascio, W.E. [Environmental Public Health Division, National Health and Environmental Effects Research Laboratory, U.S. Environmental Protection Agency, Research Triangle Park, NC (United States); Phillips, P.M. [Toxicity Assessment Division, National Health and Environmental Effects Research Laboratory, U.S. Environmental Protection Agency, Research Triangle Park, NC (United States); Ledbetter, A.D.; Schladweiler, M.C. [Environmental Public Health Division, National Health and Environmental Effects Research Laboratory, U.S. Environmental Protection Agency, Research Triangle Park, NC (United States); Andrews, D. [Research Cores Unit, National Health and Environmental Effects Research Laboratory, U.S. Environmental Protection Agency, Research Triangle Park, NC (United States); Miller, D. [Curriculum in Toxicology, University of North Carolina, Chapel Hill, NC (United States); Doerfler, D.L. [Research Cores Unit, National Health and Environmental Effects Research Laboratory, U.S. Environmental Protection Agency, Research Triangle Park, NC (United States); Kodavanti, U.P., E-mail: kodavanti.urmila@epa.gov [Environmental Public Health Division, National Health and Environmental Effects Research Laboratory, U.S. Environmental Protection Agency, Research Triangle Park, NC (United States)

2013-12-15T23:59:59.000Z

188

Plasma Chemistry and Plasma Processing, Vol. 23, No. 3, September 2003 ( 2003) Ozone Production in the Negative DC Corona  

E-Print Network [OSTI]

: Corona discharge; corona plasma; plasma reacting flow; ozone; electrostatic precipitator; Damkohler

Chen, Junhong

189

The effect of ozone on nicotine desorption from model surfaces:evidence for heterogeneous chemistry  

SciTech Connect (OSTI)

Assessment of secondhand tobacco smoke exposure using nicotine as a tracer or biomarker is affected by sorption of the alkaloid to indoor surfaces and by its long-term re-emission into the gas phase. However, surface chemical interactions of nicotine have not been sufficiently characterized. Here, the reaction of ozone with nicotine sorbed to Teflon and cotton surfaces was investigated in an environmental chamber by monitoring nicotine desorption over a week following equilibration in dry or humid air (65-70 % RH). The Teflon and cotton surfaces had N{sub 2}-BET surface areas of 0.19 and 1.17 m{sup 2} g{sup -1}, and water mass uptakes (at 70 % RH) of 0 and 7.1 % respectively. Compared with dry air baseline levels in the absence of O{sub 3}, gas phase nicotine concentrations decrease, by 2 orders of magnitude for Teflon after 50 h at 20-45 ppb O{sub 3}, and by a factor of 10 for cotton after 100 h with 13-15 ppb O{sub 3}. The ratios of pseudo first-order rate constants for surface reaction (r) to long-term desorption (k) were r/k = 3.5 and 2.0 for Teflon and cotton surfaces, respectively. These results show that surface oxidation was competitive with desorption. Hence, oxidative losses could significantly reduce long-term re-emissions of nicotine from indoor surfaces. Formaldehyde, N-methylformamide, nicotinaldehyde and cotinine were identified as oxidation products, indicating that the pyrrolidinic N was the site of electrophilic attack by O{sub 3}. The presence of water vapor had no effect on the nicotine-O{sub 3} reaction on Teflon surfaces. By contrast, nicotine desorption from cotton in humid air was unaffected by the presence of ozone. These observations are consistent with complete inhibition of ozone-nicotine surface reactions in an aqueous surface film present in cotton but not in Teflon surfaces.

Destaillats, Hugo; Singer, Brett C.; Lee, Sharon K.; Gundel, LaraA.

2005-05-01T23:59:59.000Z

190

Instrumental Methods for Professional and Amateur Collaborations in Planetary Astronomy  

E-Print Network [OSTI]

Amateur contributions to professional publications have increased exponentially over the last decades in the field of Planetary Astronomy. Here we review the different domains of the field in which collaborations between professional and amateur astronomers are effective and regularly lead to scientific publications. We discuss the instruments, detectors, softwares and methodologies typically used by amateur astronomers to collect the scientific data in the different domains of interest. Amateur contributions to the monitoring of planets and interplanetary matter, characterization of asteroids and comets, as well as the determination of the physical properties of Kuiper Belt Objects and exoplanets are discussed.

Mousis, O; Beaulieu, J -P; Bouley, S; Carry, B; Colas, F; Klotz, A; Pellier, C; Petit, J -M; Rousselot, P; Dib, M Ali; Beisker, W; Birlan, M; Buil, C; Delsanti, A; Frappa, E; Hammel, H B; Levasseur-Regourd, A -C; Orton, G S; Sanchez-Lavega, A; Santerne, A; Tanga, P; Vaubaillon, J; Zanda, B; Baratoux, D; Boehm, T; Boudon, V; Bouquet, A; Buzzi, L; Dauvergne, J -L; Decock, A; Delcroix, M; Drossart, P; Esseiva, N; Fischer, G; Fletcher, L N; Foglia, S; Gomez-Forrellad, J M; Guarro-Flo, J; Herald, D; Kugel, F; Lebreton, J -P; Lecacheux, J; Leroy, A; Maquet, L; Masi, G; Maury, A; Meyer, F; Pérez-Hoyos, S; Rajpurohit, A S; Rinner, C; Rogers, J H; Roques, F; Schmude,, R W; Sicardy, B; Tregon, B; Vanhuysse, M; Wesley, A; Widemann, T

2013-01-01T23:59:59.000Z

191

Learning about ozone depletion Paul J. Crutzen & Michael Oppenheimer  

E-Print Network [OSTI]

Learning about ozone depletion Paul J. Crutzen & Michael Oppenheimer Received: 12 January 2007 Mainz, Germany M. Oppenheimer (*) Department of Geosciences, Princeton University, Princeton, NJ 08544, USA e-mail: omichael@princeton.edu M. Oppenheimer Woodrow Wilson School of Public and International

Oppenheimer, Michael

192

Investigation of the Atmospheric Ozone Impacts of Methyl Iodide  

E-Print Network [OSTI]

J. R. Holmes (1977): “Nitrogen Dioxide Photolysis in the LosO3 Ozone NO Nitric Oxide NO2 Nitrogen Dioxide NO3 NitrateNitrogen Pentoxide HONO Nitrous Acid HNO3 Nitric Acid HNO4 Peroxynitric Acid HO2H Hydrogen Peroxide CO Carbon Monoxide SO2 Sulfur Dioxide

Carter, W P L

2007-01-01T23:59:59.000Z

193

Time-Resolved Molecular Characterization of Limonene/Ozone Aerosol using High-Resolution Electrospray Ionization Mass Spectrometry  

SciTech Connect (OSTI)

Molecular composition of limonene/O3 secondary organic aerosol (SOA) was investigated using high-resolution electrospray ionization mass spectrometry (HR-ESI-MS) as a function of reaction time. SOA was generated by ozonation of D-limonene in a reaction chamber and sampled at different time intervals using a cascade impactor. The SOA samples were extracted into acetonitrile and analyzed using a HR-ESI-MS instrument with a resolving power of 100,000 (m/?m). The resulting mass spectra provided detailed information about the extent of oxidation inferred from the O:C ratios, double bond equivalency (DBE) factors, and aromaticity indexes (AI) in hundreds of identified individual SOA species.

Bateman, Adam P.; Nizkorodov, Serguei; Laskin, Julia; Laskin, Alexander

2009-09-09T23:59:59.000Z

194

Principal Components Instrumental Variable Estimation  

E-Print Network [OSTI]

of the main results are displayed in two appendices. 2 Econometric Framework Consider the simultaneous equations model y = X? + u and X = Z?+ V , (1) 1 An advantage of such general structure is that the ‘large-sample’ condition used in previous studies Kn/ p n... ? 0, where Kn is the number of instruments and n is the sample size, is not required in our asymptotic approximations. 4 where y is the n × 1 vector containing n observations of the dependent variable; X is the n × G matrix with observations...

Winkelried, Diego; Smith, Richard J.

2011-01-31T23:59:59.000Z

195

Tevatron instrumentation: boosting collider performance  

SciTech Connect (OSTI)

The Tevatron in Collider Run II (2001-present) is operating with six times more bunches, many times higher beam intensities and luminosities than in Run I (1992-1995). Beam diagnostics were crucial for the machine start-up and the never-ending luminosity upgrade campaign. We present the overall picture of the Tevatron diagnostics development for Run II, outline machine needs for new instrumentation, present several notable examples that led to Tevatron performance improvements, and discuss the lessons for the next big machines--LHC and ILC.

Shiltsev, Vladimir; Jansson, Andreas; Moore, Ronald; /Fermilab

2006-05-01T23:59:59.000Z

196

SECTION V: SUPERCONDUCTING CYCLOTRON, INSTRUMENTATION  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared0 ResourceAwards SAGE Awards ,# , onLightThe natureINSTRUMENTATION

197

ARM - AMF1 Baseline Instruments  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert SouthwestTechnologies |November 2011AstudiesRingFacilitiesAMF1 Baseline Instruments AMF

198

DEVELOPMENT OF AN ON-LINE, REAL-TIME ALPHA RADIATION MEASURING INSTRUMENT FOR LIQUID STREAMS  

SciTech Connect (OSTI)

Thermo Power Corporation has proven the technical viability of an on-line, real-time alpha radionuclide instrument for aqueous sample analysis through laboratory and initial field tests of the instrument. The instrument has been shown to be isotonically sensitive to extremely low (ten parts per trillion, or femto Curies per liter) levels of a broad range of radioisotopes. Performance enhancement and other scaling data obtained during the course of this investigation have shown that on-line, real-time operation is possible, with a sub 30-minute response time analyzing 20 ppb (30 pCi/1) natural uranium. Now that these initial field tests in Oak Ridge, Tennessee have been successfully completed, Thermo Power plans to conduct comprehensive field tests of the instrument. The purpose of these endurance tests will be to determine the endurance characteristics of the Thermo Alpha Monitor for Water when it is used by non-Thermo Power personnel in a series of one or more extended field tests. Such endurance testing is the vital next step towards the commercialization of the Alpha Monitor. Subsequently, it will be possible to provide the DOE with an instrument that has the capability of obtaining rapid feedback about the concentrations of alpha-emitting isotope contamination in effluent water streams (Subsurface Contaminants Focus Area). It will also be useful for process control of remediation and D and D operations such as monitoring scrubber/rinse water radioactivity levels (Mixed Waste, Plutonium and D and D Focus Areas).

Unknown

1999-06-16T23:59:59.000Z

199

Certification of flow monitors for utility boilers  

SciTech Connect (OSTI)

The use of CEMS for measuring opacity, SO{sub 2}, NO{sub x}, CO{sub 2}, and O{sub 2} concentration was well proven prior to implementing the Part 75 CEMS program. However, the use of continuous flue gas flow monitoring devices is a relatively new instrumental technique. Limited operating data for flow monitors were available and little or no certification relative accuracy data were available prior to the Summer of 1993. However, because of the Part 75 requirements, utility companies contracted with CEMS vendors to install, start-up and certify flow monitors on Phase 1 and Phase 2 units. This paper presents the certification history of three different types of flow monitors (ultrasonic, pressure differential ({Delta}p) and thermal) installed at various utilities in the US. The data and experience was obtained from approximately 100 Phase 1 CEMS units and 200 Phase 1 CEMS units.

Bensink, J.; Beachler, D.; Joseph, J.

1995-12-31T23:59:59.000Z

200

The Exposure-Response Curve for Ozone and Risk of Mortality and the Adequacy of Current Ozone  

E-Print Network [OSTI]

and applied several statistical models to data on air pollution, weather, and mortality for 98 U.S. urban mortality. Interventions to further reduce ozone pollution would benefit public health, even in regions pollutant linked to numerous harmful health effects, including reduced lung function, increased frequency

Dominici, Francesca

Note: This page contains sample records for the topic "ozone monitoring instrument" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Ice Mass Balance Buoy: An Instrument to Measure and Attribute Changes in Ice Thickness  

E-Print Network [OSTI]

Ice Mass Balance Buoy: An Instrument to Measure and Attribute Changes in Ice Thickness Jacqueline A the Ice Mass Balance buoy (IMB) in response to the need for monitoring changes in the thickness of the Arctic sea ice cover. The IMB is an autonomous, ice-based system. IMB buoys provide a time series of ice

Geiger, Cathleen

202

SOUTHERN FINE PARTICULATE MONITORING PROJECT  

SciTech Connect (OSTI)

This quarterly report presents results and analysis of continuous onsite ambient fine particulate data at the North Birmingham sampling site during the January-March, 2002 study period. The continuous data include PM{sub 2.5} mass concentrations measured by TEOM, particle sulfate using the R&P 8400S monitor, particle size distributions measured by SMPS and APS monitors, and PM{sub 2.5} light scattering extinction coefficient as measured by nephelometer. Some instrumental issues were noted with the upgrade of the APS model 3320 are described in the report, as well as preliminary performance indications for the upgraded instrument. During the quarter preliminary data analysis and modeling studies were conducted to test the potential of the North Birmingham site data for source attribution analyses. Our initial assessment has continued to be optimistic in this regard due to the location of the site relative to several important classes of local and midrange emission sources. We anticipate that these analyses will provide good separations of the effects of major source classes and spatial source clusters, and will provide useful information relevant to PM{sub 2.5} implementation strategies.

Unknown

2002-04-01T23:59:59.000Z

203

Overview of coal conversion process instrumentation  

SciTech Connect (OSTI)

A review of standard instrumentation used in the processing industries is given, and the applicability of this instrumentation to measurements in mixed phase media and hostile environments such as those encountered in coal conversion processes is considered. The major projects in coal conversion sponsored by the US Department of Energy are briefly reviewed with schematics to pinpoint areas where the standard instrumentation is inadequate or altogether lacking. The next report in this series will provide detailed requirements on the instruments needed for these processes, will review new instruments which have recently become commercially available but are not yet considered standard instrumentation, and report on the status of new instruments which are being developed and, in some cases, undergoing tests in coal conversion plants.

Liptak, B. G.; Leiter, C. P.

1980-05-01T23:59:59.000Z

204

Continuous particulate monitoring for emission control  

SciTech Connect (OSTI)

An optical continuous particle monitoring system has been developed to overcome common problems associated with emissions monitoring equipment. Opacity monitors generally use a single- or double-pass system to analyze the presence of dust particles in the flue gas stream. The particles scatter and absorb light as it passes through the stack. As the particle content in the gas stream increases due to bag failure or some other problem, the amount of light that is blocked also increases. The opacity monitor compares the amount of lost light energy to the total energy of the light available and translates the signal to percentage of opacity. Opacity monitors are typically installed to meet the requirements set forth by pollution control agencies. Most opacity monitors are designed to meet all of the requirements of the Environmental Protection Agency (EPA) 40 CFR, Part 60, Appendix B, Performance Specification. The new continuous particle monitor (CPM) increases the accuracy of emission monitoring and overcomes typical problems found in conventional emission monitoring devices. The CPM is an optically based, calibratible, continuous dust monitor that uses a microprocessor, transmitter head, and receiver head. When calibrated with an isokinetic sample, a continuous readout of particulate concentration (in mg/m[sup 3]) in the exhaust gas is provided. The system can be used as a filter bag failure system or a long-term emission trend analyzer. Formal testing was conducted to evaluate the effectiveness of the optically based CPM. The monitor was calibrated using particles of a range of compositions, size distributions, and concentrations. The feasibility of using the instrument to measure particle concentration as low as 10 mg/m[sup 3] was examined.

Bock, A.H. (BHA Group, Inc., Kansas City, MO (United States))

1993-08-01T23:59:59.000Z

205

Electrical condition monitoring method for polymers  

DOE Patents [OSTI]

An electrical condition monitoring method utilizes measurement of electrical resistivity of a conductive composite degradation sensor to monitor environmentally induced degradation of a polymeric product such as insulated wire and cable. The degradation sensor comprises a polymeric matrix and conductive filler. The polymeric matrix may be a polymer used in the product, or it may be a polymer with degradation properties similar to that of a polymer used in the product. The method comprises a means for communicating the resistivity to a measuring instrument and a means to correlate resistivity of the degradation sensor with environmentally induced degradation of the product.

Watkins, Jr. Kenneth S. (Dahlonega, GA); Morris, Shelby J. (Hampton, VA); Masakowski, Daniel D. (Worcester, MA); Wong, Ching Ping (Duluth, GA); Luo, Shijian (Boise, ID)

2010-02-16T23:59:59.000Z

206

Instrument for measurement of vacuum in sealed thin wall packets  

DOE Patents [OSTI]

An instrument is described for the measurement of vacuum within sealed packets, the packets having a wall sufficiently thin that it can be deformed by the application of an external vacuum to small area thereof. The instrument has a detector head for placement against the deformable wall of the packet to apply the vacuum in a controlled manner to accomplish a limited deformation or lift of the wall, with this deformation or lift monitored by the application of light as via a bifurcated light pipe. Retro-reflected light through the light pipe is monitored with a photo detector. An abrupt change (e.g., a decrease) of retro-reflected light signals the wall movement such that the value of the vacuum applied through the head to achieve this initiation of movement is equal to the vacuum within the packet. In a preferred embodiment a vacuum reference plate is placed beneath the packet to ensure that no deformation occurs on the reverse surface of the packet. A packet production line model is also described. 3 figures.

Kollie, T.G.; Thacker, L.H.; Fine, H.A.

1993-10-05T23:59:59.000Z

207

MC and A instrumentation catalog  

SciTech Connect (OSTI)

In 1981 and 1985, two editions of a catalog of non-destructive nuclear measurement instrumentation, and material control and surveillance equipment, were published by Brookhaven National Laboratory (BNL). The last edition of the catalog included one hundred and twenty-five entries covering a wide range of devices developed in the US and abroad. More than ten years have elapsed since the publication of the more recent Catalog. Devices described in it have undergone significant modifications, and new devices have been developed. Therefore, in order to assist specialists in the field of Material Control and Accounting (MC and A), a new catalog has been created. Work on this instrumentation catalog started in 1997 as a cooperative effort of Brookhaven National Laboratory (BNL), operated by Brookhaven Science Associates under contract to the US Department of Energy, and the All-Russian Research Institute of Automatics (VNIIA), subordinate institute of the Atomic Energy Ministry of the Russian Federation, within the collaborative US-Russia Material Protection, Control, and Accounting (MPC and A) Program. Most of the equipment included in the Catalog are non-destructive assay (NDA) measurement devices employed for purposes of accounting, confirmation, and verification of nuclear materials. Other devices also included in the Catalog are employed in the detection and deterrence of unauthorized access to or removal of nuclear materials (material control: containment and surveillance). Equipment found in the Catalog comprises either: (1) complete devices or systems that can be used for MC and A applications; or (2) parts or components of complete systems, such as multi-channel analyzers, detectors, neutron generators, and software. All devices are categorized by their status of development--from prototype to serial production.

Neymotin, L. [ed.] [Brookhaven National Lab., Upton, NY (United States); Sviridova, V. [ed.] [All-Russian Research Inst. of Automatics, Moscow (Russian Federation)

1998-06-01T23:59:59.000Z

208

Electrical condition monitoring method for polymers  

DOE Patents [OSTI]

An electrical condition monitoring method utilizes measurement of electrical resistivity of an age sensor made of a conductive matrix or composite disposed in a polymeric structure such as an electrical cable. The conductive matrix comprises a base polymer and conductive filler. The method includes communicating the resistivity to a measuring instrument and correlating resistivity of the conductive matrix of the polymeric structure with resistivity of an accelerated-aged conductive composite.

Watkins, Jr., Kenneth S. (Dahlonega, GA); Morris, Shelby J. (Hampton, VA); Masakowski, Daniel D. (Worcester, MA); Wong, Ching Ping (Duluth, GA); Luo, Shijian (Boise, ID)

2008-08-19T23:59:59.000Z

209

Utility Monitor September 2010  

E-Print Network [OSTI]

Utility Monitor September 2010 Why monitor utility syntax? Enforce and Maintain Company-Wide DB2 Utility Standards. Jennifer Nelson Product Specialist, Rocket Software © 2010 IBM Corporation © 2010............................................................................................................... iv 1 Why Monitor DB2 Utility Syntax

210

Operation of automated NDA instruments for in-line HEU accounting at Y-12  

SciTech Connect (OSTI)

Two automated nondestructive assay instruments developed at Los Alamos in support of nuclear materials accounting needs are currently operating in-line at the Y-12 Plant for recovery of highly enriched uranium. One instrument provides the HEU inventory in the secondary solvent extraction system, and the other monitors HEU concentration in the secondary intermediate evaporator. Both instruments were installed in December 1982. Operational evaluation of these instruments has been a joint effort of Y-12 and Los Alamos. This has included comparison of the solvent extraction system inventories with direct measurement performed on the dumped solution components of the solvent extraction system, as well as comparisons of concentration assay results with the external assays of samples withdrawn from the process. The function, design, and preliminary results of the operational evaluation are reported.

Russo, P.A.; Strittmatter, R.B.; Sandford, E.L.; Jeter, I.W.; McCullough, E.; Bowers, G.L.

1983-01-01T23:59:59.000Z

211

Post-implementation review of inadequate core cooling instrumentation  

SciTech Connect (OSTI)

Studies of Three Mile Island (TMI) accident identified the need for additional instrumentation to detect inadequate core cooling (ICC) in nuclear power plants. Industry studies by plant owners and reactor vendors supported the conclusion that improvements were needed to help operators diagnose the approach to or existence of ICC and to provide more complete information for operator control of safety injection, flow to minimize the consequences of such an accident. In 1980, the US Nuclear Regulatory Commission (NRC) required further studies by the industry and described ICC instrumentation design requirements that included human factors and environmental considerations. On December 10, 1982, NRC issued to Babcock and Wilcox (BandW) licensees' orders for Modification of License and transmitted to all pressurized water reactor (PWR) licensees Generic Letter 82-28 to inform them of the revised NRC requirements. The instrumentation requirements for detection of ICC include upgraded subcooling margin monitors (SMMs), upgraded core exit thermocouples (CETs), and installation of a reactor coolant inventory tracking system (RCITS).

Anderson, J.L.; Anderson, R.L.; Hagen, E.W.; Morelock, T.C.; Huang, T.L.; Phillips, L.E.

1988-01-01T23:59:59.000Z

212

Scale-Up and Demonstration of Fly Ash Ozonation Technology  

SciTech Connect (OSTI)

The disposal of fly ash from the combustion of coal has become increasingly important. When the fly ash does not meet the required specification for the product or market intended, it is necessary to beneficiate it to achieve the desired quality. This project, conducted at PPL's Montour SES, is the first near full-scale ({approx}10 ton/day), demonstration of ash ozonation technology. Bituminous and sub bituminous ashes, including two ash samples that contained activated carbon, were treated during the project. Results from the tests were very promising. The ashes were successfully treated with ozone, yielding concrete-suitable ash quality. Preliminary process cost estimates indicate that capital and operating costs to treat unburned carbon are competitive with other commercial ash beneficiation technologies at a fraction of the cost of lost sales and/or ash disposal costs. This is the final technical report under DOE Cooperative Agreement No.: DE-FC26-03NT41730.

Rui Afonso; R. Hurt; I. Kulaots

2006-03-01T23:59:59.000Z

213

CF[sub 3] chemistry: Potential implications for stratospheric ozone  

SciTech Connect (OSTI)

The authors address questions about the chemistry of CF[sub 3] bearing compounds in the atmosphere, and the impact that the existence of and reaction rate constants for such species may have on stratospheric ozone. Species considered include CF[sub 3], CF[sub 3]O, CF[sub 3]O[sub 2], CF[sub 3]OH, CF[sub 3]OOH, CF[sub 3]ONO[sub 2], CF[sub 3]O[sub 2]NO[sub 2], and CF[sub 3]OOCl. Based on their calculational results, the authors suggest a number of experimental measurements which should substantially decrease uncertainties associated with the role of CF[sub 3] species in atmospheric chemistry related to ozone.

Ko, M.K.W.; Sze, N.D.; Rodriguez, J.M.; Weistenstein, D.K.; Heisey, C.W. (Atmospheric and Environmental Research, Inc., Cambridge, MA (United States)); Wayne, R.P.; Biggs, P.; Canosa-Mas, C.E. (Univ. of Oxford, Oxford (United Kingdom)); Sidebottom, H.W.; Treacy, J. (Univ. College, Dublin (Ireland))

1994-01-15T23:59:59.000Z

214

FORMATION OF MOLECULAR OXYGEN AND OZONE ON AMORPHOUS SILICATES  

SciTech Connect (OSTI)

Oxygen in the interstellar medium is seen in the gas phase, in ices (incorporated in H{sub 2}O, CO, and CO{sub 2}), and in grains such as (Mg{sub x} Fe{sub 1-x} )SiO{sub 3} or (Mg{sub x} Fe{sub 1-x} ){sub 2}SiO{sub 4}, 0 < x < 1. In this investigation, we study the diffusion of oxygen atoms and the formation of oxygen molecules and ozone on the surface of an amorphous silicate film. We find that ozone is formed at low temperature (<30 K), and molecular oxygen forms when the diffusion of oxygen atoms becomes significant, at around 60 K. This experiment, besides being the first determination of the diffusion energy barrier (1785 {+-} 35 K) for oxygen atoms on a silicate surface, suggests bare silicates as a possible storage place for oxygen atoms in low-A{sub v} environments.

Jing Dapeng; He Jiao; Vidali, Gianfranco [Physics Department, Syracuse University, Syracuse, NY 13244 (United States); Brucato, John Robert; Tozzetti, Lorenzo [Osservatorio Astrofisico di Arcetri, INAF, I-50125 Florence (Italy); De Sio, Antonio [Department of Physics and Astronomy, University of Florence, I-50125 Florence (Italy)

2012-09-01T23:59:59.000Z

215

Response to Intervention Screening and Progress Monitoring Practices in 41 Local Schools  

E-Print Network [OSTI]

This study describes response to intervention (RTI) screening and progress monitoring instruments and procedures in 41 local school settings. For screening the schools most often used published reading assessments or ...

Mellard, Daryl; McKnight, M.; Woods, Kari

2009-01-01T23:59:59.000Z

216

Meeting the New Ozone Standard: Challenges and Opportunities  

Broader source: Energy.gov [DOE]

This presentation by Anna Garcia, executive director of the Ozone Transport Commission, was part of the July 2008 Webcast sponsored by the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Weatherization and Intergovernmental Program Clean Energy and Air Quality Integration Initiative that was titled Role of Energy Efficiency and Renewable Energy in Improving Air Quality and Addressing Greenhouse Gas Reduction Goals on High Electric Demand Days.

217

R.H. Saunders GS concrete growth mitigation project instrumentation and finite element analysis  

SciTech Connect (OSTI)

In 1991, concrete expansion due to Alkali-Silica Reaction (ASR), was diagnosed as the cause of operational and structural problems at R.H. Saunders Generating Station. Reestablishment of contraction joints between the generating units by cutting slots was initiated in January 1993 to relieve accumulated stresses and allow further expansion without deforming the turbine-generators. An integral part of the remedial measure is the installation of an extensive instrumentation system and development of detailed finite element models of the powerhouse structures. In total, two hundred and thirty five instruments have been installed. The instruments include surface extensometers, borehole extensometers, crackmeters, stressmeters, pendulums, thermocouples, borehole convergence meters and strain gauges. All the instruments are monitored continuously by an Automatic Data Acquisition System (ADAS) which allows instrument data to be evaluated remotely. This instrumentation system is being used to collect data on the structural concrete expansion and response to slot cutting. To complement the instrumentation data, three different finite element models have been developed for use. The models range from a very detailed representation of a single powerhouse unit to a less detailed model of the sixteen-unit powerhouse. The finite element models have been calibrated to reflect measured data and subsequently used to estimate the location and frequency of future cuts.

Adeghe, L.; Hindy, A.; Ho, M.S. [Hydroelectric Business Unit, Ontario Hydro, Toronto, Ontario (Canada)

1995-12-31T23:59:59.000Z

218

E-Print Network 3.0 - arctic ozone loss Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Chemistry Summary: stratospheric ozone losses during cold Arctic Januaries, M. Rex, R. J. Salaw- itch, M. L. Santee, J. W. Waters... , and UARS MLS to demonstrate that the...

219

E-Print Network 3.0 - atmospheric ozone depletion Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

78992007 Summary: ozone depletion based on sequential assimilation of satellite data from the ENVISATMIPAS and Odin... 2007 Abstract. The objective of this study...

220

E-Print Network 3.0 - ambient ozone exposure Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Materials Science ; Energy Storage, Conversion and Utilization 12 Proceedings of Healthy Buildings 2009 Paper 141 Removal of Indoor Ozone with Reactive Materials: Preliminary...

Note: This page contains sample records for the topic "ozone monitoring instrument" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

E-Print Network 3.0 - atmospheric ozone increases Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Collection: Environmental Sciences and Ecology ; Geosciences 78 Proceedings of Healthy Buildings 2009 Paper 336 Time-Scale Analysis for Reactive Deposition of Ozone via Passive...

222

E-Print Network 3.0 - ameliorate ozone effects Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: students confuse the relationship between the ozone hole and the greenhouse effect, thus confusing... , and to suggest more effective teaching methods. 2....

223

E-Print Network 3.0 - analyzing ground ozone Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

are analyzed... to superposition of the "natural" pro- cesses. Comparison of the total ozone ... Source: Ecole Polytechnique, Centre de mathmatiques Collection:...

224

aexs instrument development: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

interferometer Ohta, Shigemi 2 Development of Models for Optical Instrument Transformers. Open Access Theses and Dissertations Summary: ??Optical Instrument Transformers...

225

Computational and experimental study of instrumented indentation  

E-Print Network [OSTI]

The effect of characteristic length scales, through dimensional and microstructural miniaturizations, on mechanical properties is systematically investigated by recourse to instrumented micro- and/or nanoindentation. This ...

Chollacoop, Nuwong, 1977-

2004-01-01T23:59:59.000Z

226

Rotary mode system initial instrument calibration  

SciTech Connect (OSTI)

The attached report contains the vendor calibration procedures used for the initial instrument calibration of the rotary core sampling equipment. The procedures are from approved vendor information files.

Johns, B.R.

1994-10-01T23:59:59.000Z

227

Kids with disabilities inspire a musical instrument  

ScienceCinema (OSTI)

The Midiwing is a musical instrument that unites music and computer technology for those who lack the experience, physical ability, or maturity to play music with traditional instruments. To create the instrument, Dan Daily, Director of Musicode Innovations, reworked and recoded Musical Instrument Digital Interface (MIDI) technology and introduced ergonomic design. He applied to the New Mexico Small Business Assistance (NMSBA) Program to receive help when he discovered the microcontroller he used was being phased out. Daily and Kent Pfeifer, an engineer at Sandia National Laboratories and musician himself, partnered to create a new state-of-the-art design.

Daily, Dan; Pfeifer, Kent

2014-02-10T23:59:59.000Z

228

Metering and Monitoring Approaches for Verifying Energy Savings from Energy Conservation Retrofits: Experiences from the Field  

E-Print Network [OSTI]

METERING AND MONITORING APPROACHES FOR VERIFYING ENERGY SAVINGS FROM ENERGY CONSERVATION RETROFITS: EXPERIENCES FROM THE FIELD John R. McBride Charles J. Bohmer Roger H. Lippman Senior Scientist Senior Instrumentation Senior Instrumentation... drying process that operates at a constant energy level on a constant schedule are examples of this class of load. Engineering calculations without in-field metering and monitoring may be sufficient for this project class. Next in complexity...

McBride, J. R.; Bohmer, C. J.; Lippman, R. H.

229

Instrumentation for CTA site characterization  

E-Print Network [OSTI]

Many atmospheric and climatic criteria have to be taken into account for the selection of a suitable site for the next generation of imaging air-shower Cherenkov telescopes, the "Cherenkov Telescope Array" CTA. Such data are not available with sufficient precision or the comparability to allow for a comprehensive characterization of the proposed sites to be made. Identical cross-calibrated instruments have been developed which allow for precise comparison between sites, the cross-validation of existing data, and the ground-validation of satellite data. The site characterization work package of the CTA consortium opted to construct and deploy 9 copies of an autonomous multi-purpose weather sensor, incorporating an infrared cloud sensor a newly developed sensor for measuring the light of the night sky, and an All-Sky-Camera, the whole referred to as Autonomous Tool for Measuring Observatory Site COnditions PrEcisely (ATMOSCOPE). We present here the hardware that was combined into the ATMOSCOPE and characterize ...

Fruck, Christian; Ernenwein, Jean-Pierre; Mandát, Dušan; Schweizer, Thomas; Häfner, Dennis; Bulik, Tomasz; Cieslar, Marek; Costantini, Heide; Dominik, Michal; Ebr, Jan; Garczarczyk, Markus; Lorentz, Eckart; Pareschi, Giovanni; Pech, Miroslav; Puerto-Giménez, Irene; Teshima, Masahiro

2015-01-01T23:59:59.000Z

230

Instrumentation, Control, and Intelligent Systems  

SciTech Connect (OSTI)

Abundant and affordable energy is required for U.S. economic stability and national security. Advanced nuclear power plants offer the best near-term potential to generate abundant, affordable, and sustainable electricity and hydrogen without appreciable generation of greenhouse gases. To that end, Idaho National Laboratory (INL) has been charged with leading the revitalization of nuclear power in the U.S. The INL vision is to become the preeminent nuclear energy laboratory with synergistic, world-class, multi-program capabilities and partnerships by 2015. The vision focuses on four essential destinations: (1) Be the preeminent internationally-recognized nuclear energy research, development, and demonstration laboratory; (2) Be a major center for national security technology development and demonstration; (3) Be a multi-program national laboratory with world-class capabilities; (4) Foster academic, industry, government, and international collaborations to produce the needed investment, programs, and expertise. Crucial to that effort is the inclusion of research in advanced instrumentation, control, and intelligent systems (ICIS) for use in current and advanced power and energy security systems to enable increased performance, reliability, security, and safety. For nuclear energy plants, ICIS will extend the lifetime of power plant systems, increase performance and power output, and ensure reliable operation within the system's safety margin; for national security applications, ICIS will enable increased protection of our nation's critical infrastructure. In general, ICIS will cost-effectively increase performance for all energy security systems.

Not Available

2005-09-01T23:59:59.000Z

231

DEVELOPMENT OF AN ON-LINE, REAL-TIME ALPHA RADIATION MEASURING INSTRUMENT FOR LIQUID STREAMS  

SciTech Connect (OSTI)

The US Department of Energy (DOE) has expressed a need for an on-line, real-time instrument for assaying alpha-emitting radionuclides (uranium and the transuranics) in effluent waters leaving DOE sites to ensure compliance with regulatory limits. Due to the short range of alpha particles in water ({approximately}40 Im), it is necessary now to intermittently collect samples of water and send them to a central laboratory for analysis. A lengthy and costly procedure is used to separate and measure the radionuclides from each sample. Large variations in radionuclide concentrations in the water may go undetected due to the sporadic sampling. Even when detected, the reading may not be representative of the actual stream concentration. To address these issues, the Advanced Technologies Group of Thermo Power Corporation (a Thermo Electron company) is developing a real-time, field-deployable alpha monitor based on a solid-state silicon wafer semiconductor (US Patent 5,652,013 and pending, assigned to the US Department of Energy). The Thermo Water Alpha Monitor will serve to monitor effluent water streams (Subsurface Contaminants Focus Area) and will be suitable for process control of remediation as well as decontamination and decommissioning (D and D) operations, such as monitoring scrubber or rinse water radioactivity levels (Mixed Waste, Plutonium, and D and D Focus Area). It would be applicable for assaying other liquids, such as oil, or solids after proper preconditioning. Rapid isotopic alpha air monitoring is also possible using this technology. This report details the program's accomplishments to date. Most significantly, the Alpha Monitoring Instrument was successfully field demonstrated on water 100X below the Environmental Protection Agency's proposed safe drinking water limit--down to under 1 pCi/1. During the Field Test, the Alpha Monitoring Instrument successfully analyzed isotopic uranium levels on a total of five different surface water, process water, and ground water streams (the primary water types of interest to the DOE). As an example of the user demand for such an analytical instrument, a portion of the Field Test for the Alpha Monitoring Instrument was on the DOE's Oak Ridge Reservation, at two test locations in the Y-12 Site's Bear Creek Valley.

Unknown

1999-03-14T23:59:59.000Z

232

Continuous Monitoring of Functional Activities using Wearable, Wireless Gyroscope and Accelerometer Technology  

E-Print Network [OSTI]

in activity durations and step frequency between measurement instruments. Keywords ­ activity monitoring of these measurement instruments, there is a strong interest in the technology of Micro Electro Mechanical Systems in clinical research involve the usage of one or two accelerometers attached to ankle and/or wrist (e

Little, Thomas

233

Assessment of instrumentation needs for advanced coal power plant applications: Final report  

SciTech Connect (OSTI)

The purpose of this study was to identify contaminants, identify instrumentation needs, assess available instrumentation and identify instruments that should be developed for controlling and monitoring gas streams encountered in the following power plants: Integrated Gasification Combined Cycle, Pressurized Fluidized Bed Combustion, and Gasification Molten Carbonate Fuel Cell. Emphasis was placed on hot gas cleanup system gas stream analysis, and included process control, research and environmental monitoring needs. Commercial process analyzers, typical of those currently used for process control purposes, were reviewed for the purpose of indicating commercial status. No instrument selection guidelines were found which were capable of replacing user interaction with the process analyzer vendors. This study leads to the following conclusions: available process analyzers for coal-derived gas cleanup applications satisfy current power system process control and regulatory requirements, but they are troublesome to maintain; commercial gas conditioning systems and in situ analyzers continue to be unavailable for hot gas cleanup applications; many research-oriented gas stream characterization and toxicity assessment needs can not be met by commercially available process analyzers; and greater emphasis should be placed on instrumentation and control system planning for future power plant applications. Analyzers for specific compounds are not recommended other than those needed for current process control purposes. Instead, some generally useful on-line laser-based and inductively coupled plasma methods are recommended for further development because of their potential for use in present hot gas cleanup research and future optimization, component protection and regulation compliance activities. 48 refs., 21 figs., 26 tabs.

Nelson, E.T.; Fischer, W.H.; Lipka, J.V.; Rutkowski, M.D.; Zaharchuk, R.

1987-10-01T23:59:59.000Z

234

Plasma Chemistry and Plasma Processing, Vol. 22, No. 4, December 2002 ( 2002) Ozone Production in the Positive DC Corona  

E-Print Network [OSTI]

Plasma Chemistry and Plasma Processing, Vol. 22, No. 4, December 2002 ( 2002) Ozone Production the distribution of ozone, but does not affect the rate of production. KEY WORDS: Corona discharge; corona plasma

Chen, Junhong

235

Effect of geotropism on instrument readings  

SciTech Connect (OSTI)

A review of gravity's effect on instrument readings, also referred to as geotropism. In this essay a review of meter movement construction and the effect are reviewed as it applies to portable radiation instruments. Reference to the three ANSI standards and their requirements are reviewed. An alternate approach to test for the effects is offered.

Rolph, James T.

2006-11-01T23:59:59.000Z

236

Microfabricated field calibration assembly for analytical instruments  

DOE Patents [OSTI]

A microfabricated field calibration assembly for use in calibrating analytical instruments and sensor systems. The assembly comprises a circuit board comprising one or more resistively heatable microbridge elements, an interface device that enables addressable heating of the microbridge elements, and, in some embodiments, a means for positioning the circuit board within an inlet structure of an analytical instrument or sensor system.

Robinson, Alex L. (Albuquerque, NM); Manginell, Ronald P. (Albuquerque, NM); Moorman, Matthew W. (Albuquerque, NM); Rodacy, Philip J. (Albuquerque, NM); Simonson, Robert J. (Cedar Crest, NM)

2011-03-29T23:59:59.000Z

237

Void Fraction Instrument operation and maintenance manual  

SciTech Connect (OSTI)

This Operations and Maintenance Manual (O&MM) addresses riser installation, equipment and personnel hazards, operating instructions, calibration, maintenance, removal, and other pertinent information necessary to safely operate and store the Void Fraction Instrument. Final decontamination and decommissioning of the Void Fraction Instrument are not covered in this document.

Borgonovi, G.; Stokes, T.I.; Pearce, K.L.; Martin, J.D.; Gimera, M.; Graves, D.B.

1994-09-01T23:59:59.000Z

238

HP Steam Trap Monitoring  

E-Print Network [OSTI]

STEAM MONITORING HP Steam Trap Monitoring HP Steam Trap Monitoring ? 12-18 months payback! ? 3-5% permanent reduction in consumption ? LEED Pt.? Innovation in Operations EB O&M ? Saved clients over $1,000,000 Annual consumption... Steam Trap Monitoring ? Real-time monitoring for high-pressure critical traps (>15 PSIG) ? Average total system cost $25K - $50K ? Web-Based or Modbus/BMS Integration Basic Installation Wireless Signal Transmitter Receiver Repeater...

Pascone, S.

2011-01-01T23:59:59.000Z

239

Live Webinar on the Funding Opportunity for Environmental Stewardship for Renewable Energy Technologies: MHK Environmental and Resource Characterization Instrumentation  

Broader source: Energy.gov [DOE]

This FOA will support the development of instrumentation, associated signal processing algorithms or software, and integration of instrumentation packages for monitoring the environmental impacts of marine and hydrokinetic technologies. It will also support the development and testing of sensors, instrumentation, or processing techniques to collect physical data on ocean waves (e.g., height, period, directionality, steepness). Join us for an informational webinar on March 20, 2014. The purpose of this webinar will be to give applicants a chance to ask questions about the FOA process generally. Reserve your webinar seat now at: https://www1.gotomeeting.com/register/553062432

240

Ground-based zenith sky abundances and in situ gas cross sections for ozone and nitrogen dioxide  

E-Print Network [OSTI]

Ground-based zenith sky abundances and in situ gas cross sections for ozone and nitrogen dioxide, in situ ambient absorption gas cell mea- surements for ozone and nitrogen dioxide, and ground-based zenith for ozone and nitrogen dioxide that are retrieved from measured spectra of the zenith sky

Dirksen, Ruud

Note: This page contains sample records for the topic "ozone monitoring instrument" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Ensemble forecasting with machine learning algorithms for ozone, nitrogen dioxide and PM10 on the Prev'Air  

E-Print Network [OSTI]

Ensemble forecasting with machine learning algorithms for ozone, nitrogen dioxide and PM10'Air operational platform. This platform aims at forecasting maps, on a daily basis, for ozone, nitrogen dioxide models, ozone, nitrogen dioxide, particulate matter, threshold exceedance 1. Introduction1 Operational

Mallet, Vivien

242

Radionuclide Sensors for Water Monitoring  

SciTech Connect (OSTI)

Radionuclide contamination in the soil and groundwater at U.S. Department of Energy (DOE) sites is a severe problem that requires monitoring and remediation. Radionuclide measurement techniques are needed to monitor surface waters, groundwater, and process waters. Typically, water samples are collected and transported to an analytical laboratory, where costly radiochemical analyses are performed. To date, there has been very little development of selective radionuclide sensors for alpha- and beta-emitting radionuclides such as 90Sr, 99Tc, and various actinides of interest. The objective of this project is to investigate novel sensor concepts and materials for sensitive and selective determination of beta- and alpha-emitting radionuclide contaminants in water. To meet the requirements for low-level, isotope-specific detection, the proposed sensors are based on radiometric detection. As a means to address the fundamental challenge of the short ranges of beta and alpha particles in water, our overall approach is based on localization of preconcentration/separation chemistries directly on or within the active area of a radioactivity detector. Automated microfluidics is used for sample manipulation and sensor regeneration or renewal. The outcome of these investigations will be the knowledge necessary to choose appropriate chemistries for selective preconcentration of radionuclides from environmental samples, new materials that combine chemical selectivity with scintillating properties, new materials that add chemical selectivity to solid-state diode detectors, new preconcentrating column sensors, and improved instrumentation and signal processing for selective radionuclide sensors. New knowledge will provide the basis for designing effective probes and instrumentation for field and in situ measurements.

Grate, Jay W.; Egorov, Oleg B.; DeVol, Timothy A.

2003-06-01T23:59:59.000Z

243

Radionuclide Sensors for Water Monitoring  

SciTech Connect (OSTI)

Radionuclide contamination in the soil and groundwater at U.S. Department of Energy (DOE) sites is a severe problem that requires monitoring and remediation. Radionuclide measurement techniques are needed to monitor surface waters, groundwater, and process waters. Typically, water samples are collected and transported to an analytical laboratory, where costly radiochemical analyses are performed. To date, there has been very little development of selective radionuclide sensors for alpha- and beta-emitting radionuclides such as 90Sr, 99Tc, and various actinides of interest. The objective of this project is to investigate novel sensor concepts and materials for sensitive and selective determination of beta- and alpha-emitting radionuclide contaminants in water. To meet the requirements for low-level, isotope-specific detection, the proposed sensors are based on radiometric detection. As a means to address the fundamental challenge of the short ranges of beta and alpha particle s in water, our overall approach is based on localization of preconcentration/separation chemistries directly on or within the active area of a radioactivity detector. Automated microfluidics is used for sample manipulation and sensor regeneration or renewal. The outcome of these investigations will be the knowledge necessary to choose appropriate chemistries for selective preconcentration of radionuclides from environmental samples, new materials that combine chemical selectivity with scintillating properties, new materials that add chemical selectivity to solid-state diode detectors, new preconcentrating column sensors, and improved instrumentation and signal processing for selective radionuclide sensors. New knowledge will provide the basis for designing effective probes and instrumentation for field and in situ measurements.

Grate, Jay W.; Egorov, Oleg B.; DeVol, Timothy A.

2004-06-29T23:59:59.000Z

244

Experimental study of reactions between ozone and building products M. Nicolas, O. Ramalho, F. Maupetit*  

E-Print Network [OSTI]

ozone and building products and document their potential impact on indoor air quality. PreliminaryExperimental study of reactions between ozone and building products M. Nicolas, O. Ramalho, F experiments were conducted on four building products: two carpets, a gypsum board and a pine wood board

Paris-Sud XI, Université de

245

Satellite observations of ozone and nitrogen dioxide: from retrievals to emission estimates  

E-Print Network [OSTI]

Summary Satellite observations of ozone and nitrogen dioxide: from retrievals to emission estimates be inferred for important trace gases such as ozone (O3) and nitrogen dioxide (NO2). Chemical transport models.11 to 3.79. Total nitrogen dioxide columns can be retrieved from space in the 405­465 nm window

Haak, Hein

246

Tropospheric ozone trends at Mauna Loa Observatory tied to decadal climate variability  

E-Print Network [OSTI]

measurements at Mauna Loa Observatory in Hawaii reveal little change in tropospheric ozone levels during spring a suite of chemistry­climate model simulations. We show that the flow of ozone-rich air from Eurasia towards Hawaii during spring weakened in the 2000s as a result of La-Niña-like decadal cooling

247

PPPL-3281, Preprint: January 1998, UC-426 Synthesis of Ozone at Atmospheric Pressure  

E-Print Network [OSTI]

to ~250 ppm were produced using a thermal plasma reactor system based on an ICP torch operating at 2.5 MHz by rapid mixing of molecular oxygen with atomic oxygen produced by the torch. The ozone concentration in industrial processes is increasing. Applications for ozone include treatment of waste water, water

248

Separating the dynamical effects of climate change and ozone depletion. Part  

E-Print Network [OSTI]

) fixed at 1960 levels and ozone depleting substances (ODSs) varying in time, 2) ODSs fixed at 1960 levels averaged wave drag in SH spring and summer, as well as for final warming dates. Ozone depletion a significant impact on the stratosphere on both a global and a regional scale. Over the past three decades

Wirosoetisno, Djoko

249

Chapter Descriptions, Parties Request, and Timetable 2010 WMO/UNEP Ozone Assessment  

E-Print Network [OSTI]

AND SURFACE ULTRAVIOLET RADIATION CHAPTER 3: FUTURE OZONE AND ITS IMPACT ON SURFACE UV CHAPTER 4) of this 2010 ozone assessment. It provides updated information on degradation products which could have of understanding on ODS degradation products in the stratosphere (e.g., HCl, HF, BrO, CF2O), examines how

Jánosi, Imre M.

250

The Role of Material Porosity on Ozone Uptake for Metakaolin-Concrete Surfaces  

E-Print Network [OSTI]

to a diminished environmental impact, clay may cause increased removal of ozone, an important indoor pollutant velocity, Heterogeneous Chemistry, Construction Materials 1 Introduction Metakaolin-cement systems hold ozone uptake. Cement is an essential component in the building industry used in formulating concrete

Siegel, Jeffrey

251

Simultaneous retrievals of column ozone and aerosol optical properties from direct and diffuse solar irradiance measurements  

E-Print Network [OSTI]

of column ozone and aerosol optical properties from direct and diffuse solar irradiance measurements, JSimultaneous retrievals of column ozone and aerosol optical properties from direct and diffuse solar irradiance measurements Christian D. Goering,1 Tristan S. L'Ecuyer,1 Graeme L. Stephens,1 James R

Stephens, Graeme L.

252

Effects of Sodium Chloride Particles, Ozone, UV, and Relative Humidity on Atmospheric Corrosion of Silver  

E-Print Network [OSTI]

Effects of Sodium Chloride Particles, Ozone, UV, and Relative Humidity on Atmospheric Corrosion The corrosion of Ag contaminated with NaCl particles in gaseous environments containing humidity and ozone analyzed using a coulometric reduction technique. The atmospheric corrosion of Ag was greatly accelerated

253

Air Pollution Physics and Chemistry EAS 6790 Home Work Assignment Ozone Chemistry 2  

E-Print Network [OSTI]

1 Air Pollution Physics and Chemistry EAS 6790 Fall 2010 Home Work Assignment Ozone Chemistry 2 and Chemistry EAS 6790 Fall 2006 Home Work Assignment No. 4, Ozone Chemistry Problems 11.8 and 11.9 (sub-part 1 and 2 only). Daniel Jacob, Atmospheric Chemistry #12;2 Problem 2: 2 2. Consider an air parcel ventilated

Weber, Rodney

254

Can ozone depletion and global warming interact to produce rapid climate change?  

E-Print Network [OSTI]

Can ozone depletion and global warming interact to produce rapid climate change? Dennis L. Hartmann of Climate Change (IPCC) assess- ment of the status of global warming, which reported that winter stratospheric ozone depletion and greenhouse warming are possible. These interactions may be responsible

Limpasuvan, Varavut

255

NORTHEASTERN NATURALIST2009 16(2):307313 Variation in Ozone Sensitivity Within Indian Hemp and  

E-Print Network [OSTI]

NORTHEASTERN NATURALIST2009 16(2):307­313 Variation in Ozone Sensitivity Within Indian Hemp , and Dennis R. Decoteau1 Abstract - Sixteen selections of Apocynum cannabinum (Indian Hemp) and nine, adaxial stipple, similar to symptoms ascribed to ambient ozone in the field. Indian Hemp was more

Decoteau, Dennis R.

256

Surface ozone background in the United States: Canadian and Mexican pollution influences  

E-Print Network [OSTI]

of anthropogenic emissions from Canada, Mexico, and outside North America on daily maximum 8-hour average ozone Surface ozone Air quality standard Chemical transport model Global model a b s t r a c t We use a global chemical transport model (GEOS-Chem) with 1 Ă? 1 horizontal resolution to quantify the effects

Park, Rokjin

257

Stratospheric ozone depletion: a key driver of recent precipitation trends in South Eastern South America  

E-Print Network [OSTI]

. In this paper we focus on South Eastern South America (SESA), a region that has exhibited one of the largest South America 1 Introduction The depletion of ozone in the polar Antarctic strato- sphere (i.e. `theStratospheric ozone depletion: a key driver of recent precipitation trends in South Eastern South

258

Tropospheric ozone climatology over Irene, South Africa, from 1990 to 1994 and 1998 to 2002  

E-Print Network [OSTI]

Tropospheric ozone climatology over Irene, South Africa, from 1990 to 1994 and 1998 to 2002 R. D in South Africa are reported for the period 1990 to 1994 and a more recent period, 1998 to 2002, when), Tropospheric ozone climatology over Irene, South Africa, from 1990 to 1994 and 1998 to 2002, J. Geophys. Res

Thompson, Anne

259

Passive Ozone Control Through Use of Reactive Indoor Wall and Ceiling Materials  

E-Print Network [OSTI]

Passive Ozone Control Through Use of Reactive Indoor Wall and Ceiling Materials Paper # 715 Donna A and unpainted drywall as passive ozone control surfaces in a room-sized laboratory chamber. Mean deposition-50%, resulted in increased reactivity for activated carbon. In our model for a typical house, about 35

Siegel, Jeffrey

260

Instrument for analysis of electric motors based on slip-poles component  

DOE Patents [OSTI]

A new instrument is described for monitoring the condition and speed of an operating electric motor from a remote location. The slip-poles component is derived from a motor current signal. The magnitude of the slip-poles component provides the basis for a motor condition monitor, while the frequency of the slip-poles component provides the basis for a motor speed monitor. The result is a simple-to-understand motor health monitor in an easy-to-use package. Straightforward indications of motor speed, motor running current, motor condition (e.g., rotor bar condition) and synthesized motor sound (audible indication of motor condition) are provided. With the device, a relatively untrained worker can diagnose electric motors in the field without requiring the presence of a trained engineer or technician. 4 figs.

Haynes, H.D.; Ayers, C.W.; Casada, D.A.

1996-11-26T23:59:59.000Z

Note: This page contains sample records for the topic "ozone monitoring instrument" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Instrument for analysis of electric motors based on slip-poles component  

DOE Patents [OSTI]

A new instrument for monitoring the condition and speed of an operating electric motor from a remote location. The slip-poles component is derived from a motor current signal. The magnitude of the slip-poles component provides the basis for a motor condition monitor, while the frequency of the slip-poles component provides the basis for a motor speed monitor. The result is a simple-to-understand motor health monitor in an easy-to-use package. Straightforward indications of motor speed, motor running current, motor condition (e.g., rotor bar condition) and synthesized motor sound (audible indication of motor condition) are provided. With the device, a relatively untrained worker can diagnose electric motors in the field without requiring the presence of a trained engineer or technician.

Haynes, Howard D. (Knoxville, TN); Ayers, Curtis W. (Clinton, TN); Casada, Donald A. (Knoxville, TN)

1996-01-01T23:59:59.000Z

262

Tropospheric emissions: Monitoring of pollution (TEMPO) Kelly Chance*a  

E-Print Network [OSTI]

Decadal Survey mission GEO-CAPE. TEMPO measures pollution over North America, from Mexico CityTropospheric emissions: Monitoring of pollution (TEMPO) Kelly Chance*a , Xiong Liua , Raid M Earth Venture Instrument, for launch circa 2018. It will measure atmospheric pollution for greater North

Chance, Kelly

263

Radiological Instrumentation Assessment for King County Wastewater Treatment Division  

SciTech Connect (OSTI)

The King County Wastewater Treatment Division (WTD) have concern about the aftermath of a radiological dispersion event (RDE) leading to the introduction of significant quantities of radioactive material into its combined sanitary and storm sewer system. Radioactive material could come from the use of a radiological dispersion device (RDD). RDDs include "dirty bombs" that are not nuclear detonations but are explosives designed to spread radioactive material. Radioactive material also could come from deliberate introduction or dispersion of radioactive material into the environment, including waterways and water supply systems. Volume 2 of PNNL-15163 assesses the radiological instrumentation needs for detection of radiological or nuclear terrorism, in support of decisions to treat contaminated wastewater or to bypass the West Point Treatment Plant (WPTP), and in support of radiation protection of the workforce, the public, and the infrastructure of the WPTP. Fixed radiation detection instrumentation should be deployed in a defense-in-depth system that provides 1) early warning of significant radioactive material on the way to the WPTP, including identification of the radionuclide(s) and estimates of the soluble concentrations, with a floating detector located in the wet well at the Interbay Pump Station and telemetered via the internet to all authorized locations; 2) monitoring at strategic locations within the plant, including 2a) the pipe beyond the hydraulic ram in the bar screen room; 2b) above the collection funnels in the fine grit facility; 2c) in the sampling tank in the raw sewage pump room; and 2d) downstream of the concentration facilities that produce 6% blended and concentrated biosolids. Engineering challenges exist for these applications. It is necessary to deploy both ultra-sensitive detectors to provide early warning and identification and detectors capable of functioning in high-dose rate environments that are likely under some scenarios, capable of functioning from 10 microrems per hour (background) up to 1000 rems per hour. Software supporting fixed spectroscopic detectors is needed to provide prompt, reliable, and simple interpretations of spectroscopic outputs that are of use to operators and decision-makers. Software to provide scientists and homeland security personnel with sufficient technical detail for identification, quantification, waste management decisions, and for the inevitable forensic and attribution needs must be developed. Computational modeling using MCNP software has demonstrated that useful detection capabilities can be deployed. In particular, any of the isotopes examined can be detected at levels between 0.01 and 0.1 ?Ci per gallon. General purpose instruments that can be used to determine the nature and extent of radioactive contamination and measure radiation levels for purposes of protecting personnel and members of the public should be available. One or more portable radioisotope identifiers (RIIDs) should be available to WTD personnel. Small, portable battery-powered personal radiation monitors should be widely available WTD personnel. The personal monitors can be used for personal and group radiation protection decisions, and to alert management to the need to get expert backup. All considerations of radiological instrumentation require considerations of training and periodic retraining of personnel, as well as periodic calibration and maintenance of instruments. Routine “innocent” alarms will occur due to medical radionuclides that are legally discharged into sanitary sewers on a daily basis.

Strom, Daniel J.; McConn, Ronald J.; Brodzinski, Ronald L.

2005-05-19T23:59:59.000Z

264

Acoustic emission monitoring of HFIR vessel during hydrostatic testing. Final report  

SciTech Connect (OSTI)

This report discusses the results and conclusions reached from applying acoustic emission monitoring to surveillance of the High Flux Isotope Reactor vessel during pressure testing. The objective of the monitoring was to detect crack growth and/or fluid leakage should it occur during the pressure test. The report addresses the approach, acoustic emission instrumentation, installation, calibration, and test results.

Friesel, M.A.; Dawson, J.F.

1992-08-01T23:59:59.000Z

265

Monitoring the chemistry and materials of the Magma binary-cycle generating plant  

SciTech Connect (OSTI)

This monitoring program includes studies of the following areas: chemistry of the geothermal brine, chemistry of the cooling water, corrosion of materials in both water systems, scale formation, suspended solids in th brine, and methods and instruments to monitor corrosion and chemistry. (MHR)

Shannon, D.W.; Elmore, R.P.; Pierce, D.D.

1981-10-01T23:59:59.000Z

266

AUTONOMOUS MOBILE BUOY (A-M-B) COASTAL & LAGOON: autonomous monitoring and sampling  

E-Print Network [OSTI]

AUTONOMOUS MOBILE BUOY (A-M-B) COASTAL & LAGOON: autonomous monitoring and sampling PI: Stephen, goals and objectives The project objective of this proposal is to develop an Autonomous Mobile Buoy student built instrumentation and autonomous/remotely operated vehicles that will be deployed, monitored

Wood, Stephen L.

267

Optical instrumentation for on-line analysis of chemical processes  

SciTech Connect (OSTI)

Optical diagnostics provide the capability for nonintrusive, on-line, real time analysis of chemical process streams. Several laser-based methods for monitoring fossil energy processes have been evaluated. Among the instrumentation techniques which appear quite promising are coherent anti-Stokes Raman spectroscopy (CARS), laser-induced breakdown spectroscopy (LIBS), and synchronous detection of laser-induced fluorescence (SDLIF). A CARS diagnostic was implemented on a coal gasifier and was successfully employed to measure species concentrations and temperatures within the process stream. The LIBS approach has been used to identify total trace impurities (e.g., Na, K, and S) within a gasifier. Recently, individual components in mixtures of aromatics hydrocarbons have been resolved via the synchronous detection of laser-induced fluorescence. 9 figures.

Hartford, A. Jr.; Cremers, D.A.; Loree, T.R.; Quigley, G.P.

1983-01-01T23:59:59.000Z

268

Applications of transputers to astronomical instruments  

SciTech Connect (OSTI)

Parallel processing techniques based on transputers are being applied to astronomical instruments under development. On the COSMOS photographic plate measuring machine, a data farm of transputers allows backgrounds to be determined in realtime instead of requiring 1.5 hours of offline VAX processing per plate. Transputers have been adopted as the embedded processors in a submillimetre bolometer array instrument and their use is planned in demanding future applications such as thermal infrared array instruments and data compression applied to remote observing. The techniques of interfacing transputers to external hardware and to VAX/VMS computers are discussed.

Stewart, J.M.; Beard, S,M.; Kelly, B.D.; Paterson, M.J. (Royal Observatory, Edinburgh (UK))

1990-04-01T23:59:59.000Z

269

Plasma instrumentation for fusion power reactor control  

SciTech Connect (OSTI)

Feedback control will be implemented in fusion power reactors to guard against unpredicted behavior of the plant and to assure desirable operation. In this study, plasma state feedback requirements for plasma control by systems strongly coupled to the plasma (magnet sets, RF, and neutral beam heating systems, and refueling systems) are estimated. Generic considerations regarding the impact of the power reactor environment on plasma instrumentation are outlined. Solutions are proposed to minimize the impact of the power reactor environment on plasma instrumentation. Key plasma diagnostics are evaluated with respect to their potential for upgrade and implementation as power reactor instruments.

Sager, G.T.; Bauer, J.F.; Maya, I.; Miley, G.H.

1985-07-01T23:59:59.000Z

270

Autonomous Radiation Monitoring of Small Vessels  

SciTech Connect (OSTI)

Small private vessels are one avenue by which nuclear materials may be smuggled across international borders. While one can contemplate using the terrestrial approach of radiation portal monitors on the navigable waterways that lead to many ports, these systems are ill-suited to the problem. They require vehicles to pass at slow speeds between two closely-spaced radiation sensors, relying on the uniformity of vehicle sizes to space the detectors, and on proximity to link an individual vehicle to its radiation signature. In contrast to roadways where lanes segregate vehicles, and motion is well controlled by inspection booths; channels, inlets, and rivers present chaotic traffic patterns populated by vessels of all sizes. We have developed a unique solution to this problem based on our portal-less portal monitor instrument that is designed to handle free-flowing traffic on roadways with up to five-traffic lanes. The instrument uses a combination of visible-light and gamma-ray imaging to acquire and link radiation images to individual vehicles. It was recently tested in a maritime setting. In this paper we present the instrument, how it functions, and the results of the recent tests.

Fabris, Lorenzo [ORNL; Hornback, Donald Eric [ORNL

2010-01-01T23:59:59.000Z

271

ACRF Instrumentation Status: New, Current, and Future March 2007  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

JC Liljegren

2007-03-01T23:59:59.000Z

272

ACRF Instrumentation Status: New, Current, and Future June 2007  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

JC Liljegren

2007-06-01T23:59:59.000Z

273

ACRF Instrumentation Status: New, Current, and Future May 2007  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

JC Liljegren

2007-05-01T23:59:59.000Z

274

ACRF Instrumentation Status: New, Current, and Future February 2007  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development

JC Liljegren

2007-02-01T23:59:59.000Z

275

ACRF Instrumentation Status: New, Current, and Future January 2007  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

JC Liljegren

2007-01-01T23:59:59.000Z

276

ACRF Instrumentation Status: New, Current, and Future - March 2008  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

JW Voyles

2008-04-01T23:59:59.000Z

277

ACRF Instrumentation Status: New, Current, and Future - November – December 2007  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

JW Voyles

2007-12-01T23:59:59.000Z

278

ACRF Instrumentation Status: New, Current, and Future - September – October 2007  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement (ARM) Climate Research Facility (ACRF) instrumentation status. The report is divided into the following four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) SBIR instrument development.

JW Voyles

2007-10-30T23:59:59.000Z

279

ACRF Instrumentation Status: New, Current, and Future July 2007  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of ACRF instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) SBIR instrument development.

JC Liljegren

2007-07-01T23:59:59.000Z

280

ACRF Instrumentation Status: New, Current, and Future - February 2008  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

JW Voyles

2008-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "ozone monitoring instrument" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

ACRF Instrumentation Status: New, Current, and Future May 2007  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

JC Liljegren

2007-04-01T23:59:59.000Z

282

ACRF Instrumentation Status: New, Current, and Future October 2006  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

JC Liljegren

2006-10-01T23:59:59.000Z

283

The BEAR program NRL plasma physics instrumentation measurements  

SciTech Connect (OSTI)

The BEAR program was a joint effort to launch, and demonstrate the feasibility of operating, a 1 MeV 10 ma Neutral Particle Beam (NPB) accelerator from a space platform. The accelerator design and manufacture were the responsibility of Los Alamos National Lab (LANL); diagnostics associated with accelerator operation and beam-plasma effects were also to be undertaken by LANL and NRL. Payload Integration and Telemetry was provided by the Air Force Geophysical Lab (AFGL) and Northeastern University (NEU). Beam effects on the local plasma in addition to accelerator produced vehicle effects (e.g., charging) were the responsibility of NRL as outlined herein. The BEAR rocket was launched successfully during the early morning hours of July 13 from White Sands Missile Range, White Sands, N.M. The NRL contribution to this effort included three instrument packages designed to diagnose beam-plasma and vehicle-plasma interactions. The instruments included: (1) Langmuir probe (LP) design consisting of 4 separate sensors; (2) High voltage (HIV) Langmuir Probe designed to monitor vehicle charging through current polarity changes; and (3) Plasma Wave Receive (PWR) designed to characterize the plasma wave emissions covering a broad frequency range from near DC to 50 MHz.

Walker, D.N.; Baumback, M.M.; Haas, D.G.; Rodriguez, P.; Siefring, C.L.; Doggett, R.A. [Naval Research Lab., Washington, DC (United States)

1989-11-15T23:59:59.000Z

284

INSTRUMENTATION FOR SURVEYING ACOUSTIC SIGNALS IN NATURAL GAS TRANSMISSION LINES  

SciTech Connect (OSTI)

In the U.S. natural gas is distributed through more than one million miles of high-pressure transmission pipelines. If all leaks and infringements could be detected quickly, it would enhance safety and U.S. energy security. Only low frequency acoustic waves appear to be detectable over distances up to 60 km where pipeline shut-off valves provide access to the inside of the pipeline. This paper describes a Portable Acoustic Monitoring Package (PAMP) developed to record and identify acoustic signals characteristic of: leaks, pump noise, valve and flow metering noise, third party infringement, manual pipeline water and gas blow-off, etc. This PAMP consists of a stainless steel 1/2 inch NPT plumbing tree rated for use on 1000 psi pipelines. Its instrumentation is designed to measure acoustic waves over the entire frequency range from zero to 16,000 Hz by means of four instruments: (1) microphone, (2) 3-inch water full range differential pressure transducer with 0.1% of range sensitivity, (3) a novel 3 inch to 100 inch water range amplifier, using an accumulator with needle valve and (4) a line-pressure transducer. The weight of the PAMP complete with all accessories is 36 pounds. This includes a remote control battery/switch box assembly on a 25-foot extension chord, a laptop data acquisition computer on a field table and a sun shield.

John L. Loth; Gary J. Morris; George M. Palmer; Richard Guiler; Deepak Mehra

2003-09-01T23:59:59.000Z

285

Corrosion monitoring apparatus  

DOE Patents [OSTI]

A corrosion monitoring device in an aqueous system which includes a formed crevice and monitoring the corrosion of the surfaces forming the crevice by the use of an a-c electrical signal.

Isaacs, Hugh S. (Shoreham, NY); Weeks, John R. (Stony Brook, NY)

1980-01-01T23:59:59.000Z

286

Multidimensionality of parental monitoring  

E-Print Network [OSTI]

This study explored the construct of parental monitoring and its relation to antisocial behavior in children. The factor structure of the Alabama Parenting Questionnaire Poor Monitoring/Supervision Scale (Frick, 1991) was examined to determine...

Secrest, Laura A

2012-06-07T23:59:59.000Z

287

Monitoring jobs with qs  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Jobs Monitoring jobs with qs Monitoring jobs with qs qs is an alternative tool to the SGE-provided qstat for querying the queue status developed at NERSC. qs provides an...

288

Original article Natural mating of instrumentally  

E-Print Network [OSTI]

before they start egg laying. Thus, the control over mating of parents is lost. To prevent this, queen INTRODUCTION Instrumental insemination assures control over mating of parents in the honey bee. However, Woyke

Paris-Sud XI, Université de

289

274 CEREAL CHEMISTRY ANALYTICAL TECHNIQUES AND INSTRUMENTATION  

E-Print Network [OSTI]

274 CEREAL CHEMISTRY ANALYTICAL TECHNIQUES AND INSTRUMENTATION Evaluation of the Displacement Value). Production of fuel-grade ethanol, initiated in the late 1970's as a result of rising gasoline prices

290

PRINCIPLES OF SCIENTIFIC INSTRUMENTS Spring 2012  

E-Print Network [OSTI]

/email interaction. Course requirements: Participation in class discussion, problem sets, take home final exam of exponential behavior in chem., biochem., physics: molecules vs. instruments. 6 Light absorption densitometry, energy transfer, photobleaching and single molec., image analysis. Anisotropy and molecular mobility

Sharp, Kim

291

A nano-stepping robotic instrumentation platform  

E-Print Network [OSTI]

The development of an Autonomous Nano-stepping Tool (ANT) system is presented. Each ANT is a small, tripodal, robotic instrument capable of untethered precision motion within a quasi-three-dimensional workspace of arbitrary ...

Wahab, Adam Joseph

2013-01-01T23:59:59.000Z

292

Optimization of naďve dynamic binary instrumentation Tools/  

E-Print Network [OSTI]

The proliferation of dynamic program analysis tools has done much to ease the burden of developing complex software. However, creating such tools remains a challenge. Dynamic binary instrumentation frameworks such as ...

Kleckner, Reid (Reid N.)

2011-01-01T23:59:59.000Z

293

Cellular telephone-based radiation detection instrument  

DOE Patents [OSTI]

A network of radiation detection instruments, each having a small solid state radiation sensor module integrated into a cellular phone for providing radiation detection data and analysis directly to a user. The sensor module includes a solid-state crystal bonded to an ASIC readout providing a low cost, low power, light weight compact instrument to detect and measure radiation energies in the local ambient radiation field. In particular, the photon energy, time of event, and location of the detection instrument at the time of detection is recorded for real time transmission to a central data collection/analysis system. The collected data from the entire network of radiation detection instruments are combined by intelligent correlation/analysis algorithms which map the background radiation and detect, identify and track radiation anomalies in the region.

Craig, William W. (Pittsburg, CA); Labov, Simon E. (Berkeley, CA)

2011-06-14T23:59:59.000Z

294

Positron Emission Tomography Physics, Instrumentation, Data Analysis  

E-Print Network [OSTI]

1 Positron Emission Tomography Physics, Instrumentation, Data Analysis Carl K. Hoh, MD Department fast computer Filtered Back Projection Iterative Reconstruction PET Image Reconstruction #12 PET Scanner Design · Smaller individual crystal size = better spatial resolution · Physical limit

Liu, Thomas T.

295

X-Ray Nanoimaging: Instruments and Methods  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

X-Ray Nanoimaging: Instruments and Methods To be held as part of SPIE. http:spie.orgOP318 August 28-29, 2013; San Diego, California, USA...

296

R and D program for core instrumentation improvements devoted for French sodium fast reactors  

SciTech Connect (OSTI)

Under the framework of French R and D studies for Generation IV reactors and more specifically for sodium-cooled fast reactors (SFR); the CEA, EDF and AREVA have launched a joint coordinated research programme. This paper deals with the R and D sets out to achieve better inspection, maintenance, availability and decommissioning. In particular the instrumentation requirements for core monitoring and detection in the case of accidental events. Requirements mainly involve diversifying the means of protection and improving instrumentation performance in terms of responsiveness and sensitivity. Operation feedback from the Phenix and Superphenix prototype reactors and studies, carried out within the scope of the EFR projects, has been used to define the needs for instrumentation enhancement. (authors)

Jeannot, J. P.; Rodriguez, G.; Jammes, C.; Bernardin, B.; Portier, J. L.; Jadot, F. [Commissariat a l'Energie Atomique, Saint-Paul-lez-Durance, 13108 (France); Maire, S.; Verrier, D. [Advanced Projects and Decommissioning Div. Plant Sector AREVA NP - NEPL-FT, Lyon, 69000 (France); Loisy, F. [EDF - EDF R and D STEP Dept., 6 Quai Watier, Chatou, 78401 (France); Prele, G. [EDF, Generation/Nuclear Engineering, Basic Design Dept., Villeurbanne, 69628 (France)

2011-07-01T23:59:59.000Z

297

I35W collapse, rebuild, and structural health monitoring - challenges associated with structural health monitoring of bridge systems  

SciTech Connect (OSTI)

During evening rush hour traffic on August 1, 2007, the major interstate highway bridge carrying I35W over the Mississippi River in Minneapolis catastrophically failed, tragically taking the lives of thirteen people and injuring many more. The steel truss bridge, constructed in 1967, was undergoing deck reconstruction during the collapse, and was estimated to carry more than 140,000 vehicles daily. This tragedy generated great interest in employment of structural health monitoring systems. The I35W St. Anthony Falls Bridge, a post-tensioned concrete box bridge constructed to replace the collapsed steel truss bridge, contains over 500 instruments to monitor the structural behavior. Numerical models of the bridge are being developed and calibrated to the collected data obtained from truck load tests and thermal effects. The data obtained over the first few years of monitoring are being correlated with the calibrated models and used to develop the baseline bridge behavior. This information is being used to develop a system to monitor and interpret the long-term behavior of the bridge. This paper describes the instrumentation, preliminary results from the data and model calibration, the plan for developing long-term monitoring capabilities, and the challenges associated with structural health monitoring of bridge systems. In addition, opportunities and directions for future research required to fully realize the objectives of structural health monitoring are described.

French, C. E.; Hedegaard, B.; Shield, C. K.; Stolarski, H. [Department of Civil Engineering, University of Minnesota, Minneapolis, MN 55455 (United States)

2011-06-23T23:59:59.000Z

298

A comparison of spent fuel assembly control instruments: The Cadarache PYTHON and the Los Alamos Fork  

SciTech Connect (OSTI)

Devices to monitor spent fuel assemblies while stored under water with nondestructive assay methods, have been developed in France and in the United States. Both devices are designed to verify operator's declared values of exposures and cooling-time but the applications and thus the designs of the systems differ. A study, whose results are presented in this paper, has been conducted to compare the features and the performances of the two instruments. 4 refs., 9 figs.

Bignan, G.; Capsie, J.; Romeyer-Dherbey, J. (CEA Centre d'Etudes Nucleaires de Cadarache, 13 - Saint-Paul-lez-Durance (France). Direction des Reacteurs Nucleaires); Rinard, P. (Los Alamos National Lab., NM (United States))

1991-01-01T23:59:59.000Z

299

Method and apparatus for calibrating a particle emissions monitor  

DOE Patents [OSTI]

The instant invention discloses method and apparatus for calibrating particulate emissions monitors, in particular, and sampling probes, in general, without removing the instrument from the system being monitored. A source of one or more specific metals in aerosol (either solid or liquid) or vapor form is housed in the instrument. The calibration operation is initiated by moving a focusing lens, used to focus a light beam onto an analysis location and collect the output light response, from an operating position to a calibration position such that the focal point of the focusing lens is now within a calibration stream issuing from a calibration source. The output light response from the calibration stream can be compared to that derived from an analysis location in the operating position to more accurately monitor emissions within the emissions flow stream.

Flower, William L. (Livermore, CA); Renzi, Ronald F. (Tracy, CA)

1998-07-07T23:59:59.000Z

300

Method and apparatus for calibrating a particle emissions monitor  

DOE Patents [OSTI]

The invention discloses a method and apparatus for calibrating particulate emissions monitors, in particular, sampling probes, and in general, without removing the instrument from the system being monitored. A source of one or more specific metals in aerosol (either solid or liquid) or vapor form is housed in the instrument. The calibration operation is initiated by moving a focusing lens, used to focus a light beam onto an analysis location and collect the output light response, from an operating position to a calibration position such that the focal point of the focusing lens is now within a calibration stream issuing from a calibration source. The output light response from the calibration stream can be compared to that derived from an analysis location in the operating position to more accurately monitor emissions within the emissions flow stream. 6 figs.

Flower, W.L.; Renzi, R.F.

1998-07-07T23:59:59.000Z

Note: This page contains sample records for the topic "ozone monitoring instrument" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Special Nuclear Material Portal Monitoring at the Nevada Test Site  

SciTech Connect (OSTI)

Prior to April 2007, acceptance and performance testing of the various Special Nuclear Material (SNM) monitoring devices at the Nevada Test Site (NTS) was performed by the Radiological Health Instrumentation department. Calibration and performance testing on the PM-700 personnel portal monitor was performed, but there was no test program for the VM-250 vehicle portal monitor. The handheld SNM monitors, the TSA model 470B, were being calibrated annually, but there was no performance test program. In April of 2007, the Material Control and Accountability Manager volunteered to take over performance testing of all SNM portal monitors at NTS in order to strengthen the program and meet U.S. Department of Energy Order requirements. This paper will discuss the following activities associated with developing a performance testing program: changing the culture, learning the systems, developing and implementing procedures, troubleshooting and repair, validating the process, physical control of equipment, acquisition of new systems, and implementing the performance test program.

DeAnn Long; Michael Murphy

2008-07-01T23:59:59.000Z

302

Data acquisition for low-temperature geothermal well tests and long-term monitoring. Final report  

SciTech Connect (OSTI)

Groundwater monitoring is an essential part of the development of a low-temperature geothermal field for production and injection wells. State water resource and environmental departments are requiring both geothermal well testing and long-term monitoring as a part of the permitting process for geothermal developments. This report covers water-level measurement methods, instruments used for well testing, geochemical sampling, examples of data acquisition and regulatory mandates on groundwater monitoring.

Lienau, P.J.

1992-09-01T23:59:59.000Z

303

Data acquisition for low-temperature geothermal well tests and long-term monitoring  

SciTech Connect (OSTI)

Groundwater monitoring is an essential part of the development of a low-temperature geothermal field for production and injection wells. State water resource and environmental departments are requiring both geothermal well testing and long-term monitoring as a part of the permitting process for geothermal developments. This report covers water-level measurement methods, instruments used for well testing, geochemical sampling, examples of data acquisition and regulatory mandates on groundwater monitoring.

Lienau, P.J.

1992-09-01T23:59:59.000Z

304

Ozone-depleting-substance control and phase-out plan  

SciTech Connect (OSTI)

Title VI of the Federal Clean Air Act Amendments of 1990 requires regulation of the use and disposal of ozone-depleting substances (ODSs) (e.g., Halon, Freon). Several important federal regulations have been promulgated that affect the use of such substances at the Hanford Site. On April 23, 1993, Executive Order (EO) 12843, Procurement Requirements and Policies for Federal Agencies for Ozone-Depleting Substances (EPA 1993) was issued for Federal facilities to conform to the new US Environmental Protection Agency (EPA) regulations implementing the Clean Air Act of 1963 (CAA), Section 613, as amended. To implement the requirements of Title VI the US Department of Energy, Richland Operations Office (RL), issued a directive to the Hanford Site contractors on May 25, 1994 (Wisness 1994). The directive assigns Westinghouse Hanford Company (WHC) the lead in coordinating the development of a sitewide comprehensive implementation plan to be drafted by July 29, 1994 and completed by September 30, 1994. The implementation plan will address several areas where immediate compliance action is required. It will identify all current uses of ODSs and inventories, document the remaining useful life of equipment that contains ODS chemicals, provide a phase-out schedule, and provide a strategy that will be implemented consistently by all the Hanford Site contractors. This plan also addresses the critical and required elements of Federal regulations, the EO, and US Department of Energy (DOE) guidance. This plan is intended to establish a sitewide management system to address the clean air requirements.

Nickels, J.M.; Brown, M.J.

1994-07-01T23:59:59.000Z

305

INFLUENCE OF ELEVATED OZONE AND CARBON DIOXIDE ON INSECT DENSITIES.  

SciTech Connect (OSTI)

The combustion of fossil fuels is profoundly altering the chemical composition of the atmosphere. Beginning with the Industrial Revolution, the concentration of carbon dioxide in the atmosphere has increased from approximately 280 to 370 {micro}l l{sup -1} in 2004, and it is expected to exceed 550 {micro}l l{sup -1} by 2050. Tropospheric ozone has risen even more rapidly than CO{sub 2} and average summer concentrations in the Northern Hemisphere are expected to continue to increase by 0.5-2.5% per year over the next 30 years. Although elevated CO{sub 2} stimulates photosynthesis and productivity of terrestrial ecosystems, ozone (O{sub 3}) is deleterious. In addition to directly affecting the physiology and productivity of crops, increased concentrations of tropospheric CO{sub 2} and O{sub 3} are predicted to lower the nutritional quality of leaves, which has the potential to increase herbivory as insects eat more to meet their nutritional demands. We tested the hypothesis that changes in tropospheric chemistry affect the relationship between plants and insect herbivores by changing leaf quality. The susceptibility to herbivory of soybean grown in elevated CO{sub 2} or O{sub 3} was examined using free air gas concentration enrichment (SoyFACE). FACE technology has the advantage that plants are cultivated under realistic field conditions with no unwanted alteration of microclimate or artificial constraints on the insect community.

DELUCIA, E.; DERMODY, O.; O'NEILL, B.; ALDEA, M.; HAMILTON, J.; ZANGERL, A.; ROGER, A.; BERENBAUM, M.

2005-01-05T23:59:59.000Z

306

Nuclear Instruments and Methods in Physics Research A 554 (2005) 494499 Micro-pocket fission detectors (MPFD) for  

E-Print Network [OSTI]

Nuclear Instruments and Methods in Physics Research A 554 (2005) 494­499 Micro-pocket fission, A.S.M. Sabbir Ahmed, J. Kenneth Shultis S.M.A.R.T. Laboratory, Department of Mechanical and Nuclear and tested as in-core flux monitors in the 250 kW TRIGA nuclear reactor at Kansas State University

Shultis, J. Kenneth

307

THE IMPACT OF OZONE ON THE LOWER FLAMMABLE LIMIT OF HYDROGEN IN VESSELS CONTAINING SAVANNAH RIVER SITE HIGH LEVEL WASTE  

SciTech Connect (OSTI)

The Savannah River Site, in conjunction with AREVA Federal services, has designed a process to treat dissolved radioactive waste solids with ozone. It is known that in this radioactive waste process, radionuclides radiolytically break down water into gaseous hydrogen and oxygen, which presents a well defined flammability hazard. Flammability limits have been established for both ozone and hydrogen separately; however, there is little information on mixtures of hydrogen and ozone. Therefore, testing was designed to provide critical flammability information necessary to support safety related considerations for the development of ozone treatment and potential scale-up to the commercial level. Since information was lacking on flammability issues at low levels of hydrogen and ozone, a testing program was developed to focus on filling this portion of the information gap. A 2-L vessel was used to conduct flammability tests at atmospheric pressure and temperature using a fuse wire ignition source at 1 percent ozone intervals spanning from no ozone to the Lower Flammable Limit (LFL) of ozone in the vessel, determined as 8.4%(v/v) ozone. An ozone generator and ozone detector were used to generate and measure the ozone concentration within the vessel in situ, since ozone decomposes rapidly on standing. The lower flammability limit of hydrogen in an ozone-oxygen mixture was found to decrease from the LFL of hydrogen in air, determined as 4.2 % (v/v) in this vessel. From the results of this testing, Savannah River was able to develop safety procedures and operating parameters to effectively minimize the formation of a flammable atmosphere.

Sherburne, Carol [Savannah River Site (SRS), Aiken, SC (United States). Savannah River Remediation, LLC; Osterberg, Paul [Fauske and Associates, LLC, Burr Ridge, IL (United States); Johnson, Tom [Fauske and Associates, LLC, Burr Ridge, IL (United States); Frawely, Thomas [Fauske and Associates, LLC, Burr Ridge, IL (United States)

2013-01-23T23:59:59.000Z

308

Seismic Imaging and Monitoring  

SciTech Connect (OSTI)

I give an overview of LANL's capability in seismic imaging and monitoring. I present some seismic imaging and monitoring results, including imaging of complex structures, subsalt imaging of Gulf of Mexico, fault/fracture zone imaging for geothermal exploration at the Jemez pueblo, time-lapse imaging of a walkway vertical seismic profiling data for monitoring CO{sub 2} inject at SACROC, and microseismic event locations for monitoring CO{sub 2} injection at Aneth. These examples demonstrate LANL's high-resolution and high-fidelity seismic imaging and monitoring capabilities.

Huang, Lianjie [Los Alamos National Laboratory

2012-07-09T23:59:59.000Z

309

Time-Resolved Molecular Characterization of Limonene/Ozone Aerosol...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

time intervals using a cascade impactor. The SOA samples were extracted into acetonitrile and analyzed using a HR-ESI-MS instrument with a resolving power of 100,000 (m...

310

Surface modification of nitrogen-doped carbon nanotubes by ozone via atomic layer deposition  

SciTech Connect (OSTI)

The use of ozone as an oxidizing agent for atomic layer deposition (ALD) processes is rapidly growing due to its strong oxidizing capabilities. However, the effect of ozone on nanostructured substrates such as nitrogen-doped multiwalled carbon nanotubes (NCNTs) and pristine multiwalled carbon nanotubes (PCNTs) are not very well understood and may provide an avenue toward functionalizing the carbon nanotube surface prior to deposition. The effects of ALD ozone treatment on NCNTs and PCNTs using 10?wt. % ozone at temperatures of 150, 250, and 300?°C are studied. The effect of ozone pulse time and ALD cycle number on NCNTs and PCNTs was also investigated. Morphological changes to the substrate were observed by scanning electron microscopy and high resolution transmission electron microscopy. Brunauer-Emmett-Teller measurements were also conducted to determine surface area, pore size, and pore size distribution following ozone treatment. The graphitic nature of both NCNTs and PCNTs was determined using Raman analysis while x-ray photoelectron spectroscopy (XPS) was employed to probe the chemical nature of NCNTs. It was found that O{sub 3} attack occurs preferentially to the outermost geometric surface of NCNTs. Our research also revealed that the deleterious effects of ozone are found only on NCNTs while little or no damage occurs on PCNTs. Furthermore, XPS analysis indicated that ALD ozone treatment on NCNTs, at elevated temperatures, results in loss of nitrogen content. Our studies demonstrate that ALD ozone treatment is an effective avenue toward creating low nitrogen content, defect rich substrates for use in electrochemical applications and ALD of various metal/metal oxides.

Lushington, Andrew; Liu, Jian; Tang, Yongji; Li, Ruying; Sun, Xueliang, E-mail: xsun@eng.uwo.ca [Department of Mechanical and Materials Engineering, University of Western Ontario, London, Ontario N6A 5B9 (Canada)

2014-01-15T23:59:59.000Z

311

Environmental Monitoring Plan  

SciTech Connect (OSTI)

This Environmental Monitoring Plan was written to fulfill the requirements of Department of Energy (DOE) Order 5400.1 and DOE Environmental Regulatory Guide DOE/EH 0173T. This Plan documents the background, organizational structure, and methods used for effluent monitoring and environmental surveillance at Sandia National Laboratories/California. The design, rationale, and historical results of the environmental monitoring system are discussed in detail. Throughout the Plan, recommendations for improvements to the monitoring system are made. This revision to the Environmental Monitoring Plan was written to document the changes made to the Monitoring Program during 1992. Some of the data (most notably the statistical analyses of past monitoring data) has not been changed.

Holland, R.C. [Science Applications International Corp., San Diego, CA (United States)

1993-07-01T23:59:59.000Z

312

National Instruments online training and training credits offering...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

National Instruments online training and training credits offering The lab has entered into an Enterprise Agreement with National Instruments (NI) to offer online training and...

313

IceCube: An Instrument for Neutrino Astronomy  

E-Print Network [OSTI]

An Instrument for Neutrino Astronomy Francis Halzen 1 andAn Instrument for Neutrino Astronomy Francis Halzen 1 and94720 Abstract Neutrino astronomy beyond the Sun was first

Halzen, F.

2010-01-01T23:59:59.000Z

314

Surveillance Guides - QAS 2.4 Instrument Calibration  

Broader source: Energy.gov (indexed) [DOE]

of the contractor's program to routinely calibrate instruments, alarms, and sensors. The Facility Representative observes calibration testing of instruments and channels...

315

SciTech Connect: Nuclear power reactor instrumentation systems...  

Office of Scientific and Technical Information (OSTI)

Nuclear power reactor instrumentation systems handbook. Volume 1 Citation Details In-Document Search Title: Nuclear power reactor instrumentation systems handbook. Volume 1 You...

316

Fully integrated safeguards and security for reprocessing plant monitoring.  

SciTech Connect (OSTI)

Nuclear fuel reprocessing plants contain a wealth of plant monitoring data including material measurements, process monitoring, administrative procedures, and physical protection elements. Future facilities are moving in the direction of highly-integrated plant monitoring systems that make efficient use of the plant data to improve monitoring and reduce costs. The Separations and Safeguards Performance Model (SSPM) is an analysis tool that is used for modeling advanced monitoring systems and to determine system response under diversion scenarios. This report both describes the architecture for such a future monitoring system and present results under various diversion scenarios. Improvements made in the past year include the development of statistical tests for detecting material loss, the integration of material balance alarms to improve physical protection, and the integration of administrative procedures. The SSPM has been used to demonstrate how advanced instrumentation (as developed in the Material Protection, Accounting, and Control Technologies campaign) can benefit the overall safeguards system as well as how all instrumentation is tied into the physical protection system. This concept has the potential to greatly improve the probability of detection for both abrupt and protracted diversion of nuclear material.

Duran, Felicia Angelica; Ward, Rebecca; Cipiti, Benjamin B.; Middleton, Bobby D.

2011-10-01T23:59:59.000Z

317

Oxidation of methyl tert-butyl ether (MTBE) and ethyl tert-butyl ether (ETBE) by ozone and combined ozone/hydrogen peroxide  

SciTech Connect (OSTI)

The aim of this work was to study the reaction of ozone and combined ozone/hydrogen peroxide on oxygenated additives such as methyl tert-butyl ether (MTBE) and ethyl tert-butyl ether (ETBE) in dilute aqueous solution using controlled experimental conditions. Experiments conducted in a semi-continuous reactor with MTBE and ETBE in combination (initial concentration: 2 mmol/L of each) showed that ETBE was better eliminated than MTBE with both ozone and combined O[sub 3]/H[sub 2]O[sub 2]. batch experiments led to the determination of the ratio of the kinetic constants for the reaction of OH[degree]-radical with MTBE and ETBE (k[sub OH[degree]/ETBE]/k[sub OH[degree]//MTBE] = 1.7). Tert-butyl formate and tert-butyl acetate were identified as the ozonation byproducts of MTBE an ETBE, respectively, while tert-butyl alcohol was found to be produced during the ozonation of both compounds. 10 refs., 10 figs., 1 tab.

Leitner, N.K.V.; Papailhou, A.L.; Croue, J.P.; Dore, M. (Univ. de Poitiers (France)); Peyrot, J. (British Petroleum, Harfleur (France))

1994-01-01T23:59:59.000Z

318

Instrumentation to Enhance Advanced Test Reactor Irradiations  

SciTech Connect (OSTI)

The Department of Energy (DOE) designated the Advanced Test Reactor (ATR) as a National Scientific User Facility (NSUF) in April 2007 to support U.S. leadership in nuclear science and technology. By attracting new research users - universities, laboratories, and industry - the ATR will support basic and applied nuclear research and development, further advancing the nation's energy security needs. A key component of the ATR NSUF effort is to prove new in-pile instrumentation techniques that are capable of providing real-time measurements of key parameters during irradiation. To address this need, an assessment of instrumentation available and under-development at other test reactors has been completed. Based on this review, recommendations are made with respect to what instrumentation is needed at the ATR and a strategy has been developed for obtaining these sensors. Progress toward implementing this strategy is reported in this document. It is anticipated that this report will be updated on an annual basis.

J. L. Rempe; D. L. Knudson; K. G. Condie; J. E. Daw; S. C. Taylor

2009-09-01T23:59:59.000Z

319

Advances in instrumentation for nuclear astrophysics  

SciTech Connect (OSTI)

The study of the nuclear physics properties which govern energy generation and nucleosynthesis in the astrophysical phenomena we observe in the universe is crucial to understanding how these objects behave and how the chemical history of the universe evolved to its present state. The low cross sections and short nuclear lifetimes involved in many of these reactions make their experimental determination challenging, requiring developments in beams and instrumentation. A selection of developments in nuclear astrophysics instrumentation is discussed, using as examples projects involving the nuclear astrophysics group at Oak Ridge National Laboratory. These developments will be key to the instrumentation necessary to fully exploit nuclear astrophysics opportunities at the Facility for Rare Isotope Beams which is currently under construction.

Pain, S. D. [Physics Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831 (United States)] [Physics Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831 (United States)

2014-04-15T23:59:59.000Z

320

Nuclear Instruments and Methods in Physics Research A 360 (1995) 189-192 INSTRUMENTS  

E-Print Network [OSTI]

ELSEVIER Nuclear Instruments and Methods in Physics Research A 360 (1995) 189-192 NUCLEARFaculty ofPhysics and Nuclear Techniques Academy ofMining and Metallurgy, Cracow, Poland h INFN, Torino INSTRUMENTS 8 METHODS IN PHYSICS RESEARCH SectIonA A fast, high-granularity silicon multiplicity detector

Ramello, Luciano

Note: This page contains sample records for the topic "ozone monitoring instrument" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Nuclear Instruments and Methods in Physics Research A 356 (1995) l-4 INSTRUMENTS  

E-Print Network [OSTI]

ELSEVIER Nuclear Instruments and Methods in Physics Research A 356 (1995) l-4 NUCLEAR INSTRUMENTS 8 METHODS IN PHYSICS REgtR?n Thermodynamics of dynamic nuclear polarization W.Th. Wenckebach Faculty ofApplied Physics, Delfr Unicersity of Technology, P.O.B. 5046, 2600 GA De& The Netherlands Abstract Dynamic nuclear

Dutz, Hartmut

322

Scale-Up and Demonstration of Fly Ash Ozonation Technology  

SciTech Connect (OSTI)

This is the fourth quarterly report under DOE Cooperative Agreement No.: DE-FC26-03NT41730. Due a number of circumstances, mostly associated with subcontractor agreements, the actual beginning of the project was delayed from its original award date of March 5, 2003. DOE's Project Manager was kept informed (verbally) by PPL's Project Manager throughout this period. Because of this delay, this is the fourth quarterly report and it refers to the time period from January to March 2004. The on-site deployment and testing of the ozonation system took place during this period. This report summarizes these activities including some preliminary results. No significant issues or concerns are identified.

Larry LaBuz; Rui Afonso

2005-03-31T23:59:59.000Z

323

Three-dimensional simulations of wintertime ozone variability in the lower stratosphere  

SciTech Connect (OSTI)

The evolution of ozone has been calculated for the winters of 1979 and 1989 using winds derived from the authors stratospheric data assimilation system (STRATAN). The ozone fields calculated using this technique are found to compare well with satellite-measured fields for simulations of 2-3 months. Here the authors present comparisons of model fields with both satellite and sonde measurements to verify that stratospheric transport processes are properly represented by this modeling technique. Attention is focussed on the northern hemisphere middle and high latitudes at the 10-hPa level and below, where transport processes are most important to the ozone distribution. First-order quantities and derived budgets from both the model and satellite data are presented. By sampling the model with a limb-viewing satellite and then Kalman filtering the observations of the model, it is shown that transient subplanetary-scale features that are essential to the ozone budget are missed by the satellite system.

Rood, R.B.; Douglass, A.R.; Kaye, J.A. (NASA Goddard Space Flight Center, Greenbelt, MD (USA)); Geller, M.A.; Yuechen, Chi (State Univ. of New York, Stony Brook (USA)); Allen, D.J.; Larson, E.M.; Nash, E.R.; Nielsen, J.E. (Applied Research Corp., Landover, MD (USA))

1991-03-20T23:59:59.000Z

324

Reductions in ozone concentrations due to controls on variability in industrial flare emissions in Houston, Texas  

E-Print Network [OSTI]

High concentrations of ozone in the Houston/Galveston area are associated with industrial plumes of highly reactive hydrocarbons, mixed with NOx. The emissions leading to these plumes can have significant temporal variability, ...

Nam, Junsang

2007-01-01T23:59:59.000Z

325

The effect of variability in industrial emissions on ozone formation in Houston, Texas  

E-Print Network [OSTI]

Ambient observations have indicated that high concentrations of ozone observed in the Houston/Galveston area are associated with plumes of highly reactive hydrocarbons, mixed with NOx, from industrial facilities. Ambient ...

Webster, Mort David

2007-01-01T23:59:59.000Z

326

Climatology and Trends in the Forcing of the Stratospheric Ozone Transport  

E-Print Network [OSTI]

A thorough analysis of the ozone transport was carried out using the Transformed-Mean Eulerian (TEM) tracer transport equation and the European Centre for Medium-Range Weather Forecasts (ECMWF) Re- Analysis (ERA-40). In ...

Monier, Erwan

327

A Spatial Econometric Approach to Measuring Pollution Externalities: An Application to Ozone Smog  

E-Print Network [OSTI]

A Spatial Econometric Approach to Measuring Pollution Externalities: An Application to Ozone Smog C.-Y. Cynthia Lin University of California at Davis ­ USA Abstract. This paper uses spatial econometrics

Lin, C.-Y. Cynthia

328

Evaluation of a novel ozone generation technique for disinfection of poultry hatchers and processed broiler carcasses  

E-Print Network [OSTI]

When comparing electrochemically generated ozone(03)(2.94.2 wt % inside the (hatcher) and formaldehyde (16 n-A formalin + 7.5 g potassium pertnanganate) for disinfection of Salmonella enteiltidis (SE) contaminated agar plates and typical hatchery...

Ramirez, Gerardo Arturo

1994-01-01T23:59:59.000Z

329

Climatology and trends in the forcing of the stratospheric ozone transport  

E-Print Network [OSTI]

A thorough analysis of the ozone transport was carried out using the Transformed-Mean Eulerian (TEM) tracer continuity equation and the European Centre for Medium-Range Weather Forecasts (ECMWF) Re-Analysis (ERA-40). In ...

Monier, Erwan

330

Atmospheric Environment 39 (2005) 28292838 Diurnal and seasonal cycles of ozone precursors observed from  

E-Print Network [OSTI]

characteristics. Ethane and propane, largely originated from leakage of natural gas or liquefied petroleum gases) and nitrogen oxides (NO+NO2 ÂĽ NOx), ozone is photochemically pro- duced and can accumulate to hazardous levels

Wingenter, Oliver W.

331

Ozone response to emission changes: a modeling study during the MCMA-2006/MILAGRO Campaign  

E-Print Network [OSTI]

The sensitivity of ozone production to precursor emissions was investigated under five different meteorological conditions in the Mexico City Metropolitan Area (MCMA) during the MCMA-2006/MILAGRO field campaign using the ...

Song, Jihee

332

Real-World Studies of Ambient Ozone Formation as a Function of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

-- Washington D.C. ace29lawson.pdf More Documents & Publications Weekday and Weekend Air Pollutant Levels in Ozone Problem Areas in the U.S. Health Impacts Program DOE's...

333

Ozone predictabilities due to meteorological uncertainties in the Mexico City basin using ensemble forecasts  

E-Print Network [OSTI]

The purpose of the present study is to investigate the sensitivity of ozone (O3)[(O subscript 3)] predictions in the Mexico City Metropolitan Area (MCMA) to meteorological initial uncertainties and planetary boundary layer ...

Bei, Naifang

334

Wide-range monitor for pulsed x-ray sources  

SciTech Connect (OSTI)

A monitoring instrument based on a high-pressure ionization chamber has been developed that measures average dose rates as low as 0.1 mR/h and responds linearly to short pulses at dose rates up to 1.2 x 10/sup 10/ R/h. Its sensitivity can be remotely changed by a factor of 10/sup 4/, to enable accurate measurement of both background radiation and very high intensities such as can be expected from accelerator beam-spills. The instrument's detector-electrometer pulse response was measured using a dose-calibrated field-emission accelerator having a 30-ns pulse width.

Kaifer, R.C.; Jenkins, T.E.; Straume, T.

1981-10-12T23:59:59.000Z

335

Power consumption monitoring using additional monitoring device  

SciTech Connect (OSTI)

Today, emphasis is placed on reducing power consumption. Computers are large consumers; therefore it is important to know the total consumption of computing systems. Since their optimal functioning requires quite strict environmental conditions, without much variation in temperature and humidity, reducing energy consumption cannot be made without monitoring environmental parameters. Thus, the present work uses a multifunctional electric meter UPT 210 for power consumption monitoring. Two applications were developed: software which carries meter readings provided by electronic and programming facilitates remote device and a device for temperature monitoring and control. Following temperature variations that occur both in the cooling system, as well as the ambient, can reduce energy consumption. For this purpose, some air conditioning units or some computers are stopped in different time slots. These intervals were set so that the economy is high, but the work's Datacenter is not disturbed.

Tru?c?, M. R. C., E-mail: radu.trusca@itim-cj.ro; Albert, ?., E-mail: radu.trusca@itim-cj.ro; Tudoran, C., E-mail: radu.trusca@itim-cj.ro; Soran, M. L., E-mail: radu.trusca@itim-cj.ro; F?rca?, F., E-mail: radu.trusca@itim-cj.ro [National Institute for Research and Development of Isotopic and Molecular Technologies, 65-103 Donath, 400293 Cluj-Napoca (Romania); Abrudean, M. [Technical University of Cluj-Napoca, Cluj-Napoca (Romania)] [Technical University of Cluj-Napoca, Cluj-Napoca (Romania)

2013-11-13T23:59:59.000Z

336

Environmental monitoring plan  

SciTech Connect (OSTI)

This Environmental Monitoring Plan was written to fulfill the requirements of Department of Energy (DOE) Order 5400.1 and DOE Environmental Regulatory Guide DOE/EH 0173T. This Plan documents the background, organizational structure, and methods used for effluent monitoring and environmental surveillance at Sandia National Laboratories/California. The design, rationale, and historical results of the environmental monitoring system are discussed in detail. Throughout the Plan, recommendations for improvements to the monitoring system are made. 52 refs., 10 figs., 12 tabs.

Holland, R.C.

1997-02-01T23:59:59.000Z

337

Instrumentation of the thermal/structural interactions in situ tests at the Waste Isolation Pilot Plant (WIPP)  

SciTech Connect (OSTI)

The Department of Energy has constructed the Waste Isolation Pilot Plant (WIPP) to develop the technology for the disposal of radioactive waste from defense programs. Sandia National Laboratories had the responsibility for the experimental activities at the WIPP and fielded several large-scale Thermal/Structural Interactions (TSI) in situ tests to validate techniques used to predict repository performance. The instrumentation of these tests involved the placement of over 4,200 gages including room closure gages, borehole extensometers, stress gages, borehole inclinometers, fixed reference gages, borehole strain gages, thermocouples, thermal flux meters, heater power gages, environmental gages, and ventilation gages. Most of the gages were remotely read instruments that were monitored by an automated data acquisition system, but manually read instruments were also used to provide early deformation information and to provide a redundancy of measurement for the remote gages. Instruments were selected that could operate in the harsh environment of the test rooms and that could accommodate the ranges of test room responses predicted by pretest calculations. Instruments were tested in the field prior to installation at the WIPP site and were modified to improve their performance. Other modifications were made to gages as the TSI tests progressed using knowledge gained from test maintenance. Quality assurance procedures were developed for all aspects of instrumentation including calibration, installation, and maintenance. The instrumentation performed exceptionally well and has produced a large quantity of quality information.

Munson, D.E. [Sandia National Labs., Albuquerque, NM (United States). Repository Isolation Systems Div.; Hoag, D.L.; Blankenship, D.A.; DeYonge, W.F.; Schiermeister, D.M. [RE/SPEC, Inc., Albuquerque, NM (United States); Jones, R.L.; Baird, G.T. [Tech Reps, Inc., Albuquerque, NM (United States)

1997-04-01T23:59:59.000Z

338

Formation of ozone and oxidation of methane in a direct current corona discharge  

E-Print Network [OSTI]

FORMATION OF OZONE AND OXIDATION OF METHANE IN A DIRECT CURRENT CORONA DISCHARGE A Thesis by UMASHANKER TANGIRALA Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirement for the degree of MASTER... OF SCIENCE May 1976 Major Subject: Chemical Engineering FORMATION OF OZONE AND OXIDATION OF METHANE IN A DIRECT CURRENT CORONA DISCHARGE A Thesis by UMASHANKER TANGIRALA Approved as to style and content by: (Chairman of Committee) ( ad of Department...

Tangirala, Umashanker

1976-01-01T23:59:59.000Z

339

FY-2010 Process Monitoring Technology Final Report  

SciTech Connect (OSTI)

During FY 2010, work under the Spectroscopy-Based Process Monitoring task included ordering and receiving four fluid flow meters and four flow visible-near infrared spectrometer cells to be instrumented within the centrifugal contactor system at Pacific Northwest National Laboratory (PNNL). Initial demonstrations of real-time spectroscopic measurements on cold-stream simulants were conducted using plutonium (Pu)/uranium (U) (PUREX) solvent extraction process conditions. The specific test case examined the extraction of neodymium nitrate (Nd(NO3)3) from an aqueous nitric acid (HNO3) feed into a tri-n-butyl phosphate (TBP)/ n-dodecane solvent. Demonstration testing of this system included diverting a sample from the aqueous feed meanwhile monitoring the process in every phase using the on-line spectroscopic process monitoring system. The purpose of this demonstration was to test whether spectroscopic monitoring is capable of determining the mass balance of metal nitrate species involved in a cross-current solvent extraction scheme while also diverting a sample from the system. The diversion scenario involved diverting a portion of the feed from a counter-current extraction system while a continuous extraction experiment was underway. A successful test would demonstrate the ability of the process monitoring system to detect and quantify the diversion of material from the system during a real-time continuous solvent extraction experiment. The system was designed to mimic a PUREX-type extraction process with a bank of four centrifugal contactors. The aqueous feed contained Nd(NO3)3 in HNO3, and the organic phase was composed of TBP/n-dodecane. The amount of sample observed to be diverted by on-line spectroscopic process monitoring was measured to be 3 mmol (3 x 10-3 mol) Nd3+. This value was in excellent agreement with the 2.9 mmol Nd3+ value based on the known mass of sample taken (i.e., diverted) directly from the system feed solution.

Orton, Christopher R.; Bryan, Samuel A.; Casella, Amanda J.; Hines, Wes; Levitskaia, Tatiana G.; henkell, J.; Schwantes, Jon M.; Jordan, Elizabeth A.; Lines, Amanda M.; Fraga, Carlos G.; Peterson, James M.; Verdugo, Dawn E.; Christensen, Ronald N.; Peper, Shane M.

2011-01-01T23:59:59.000Z

340

Ozone response of foliage and cells of sensitive and tolerant potato cultivars  

SciTech Connect (OSTI)

The ozone response was contrasted between Cherokee' and Norchip', relatively ozone-sensitive and -tolerant potato cultivars, respectively. Leaf conductance of the two cultivars was determined with a diffusive resistance porometer before, during and after a 3-hour exposure to 0.25 ppm ozone (490 ..mu..g m3). While Cherokee foliage had a higher leaf conductance at the onset of the ozone exposure, conductance of Norchip foliage was too high throughout the experiment to account for relative tolerance of the latter cultivar. Norchip and Cherokee both exhibited abaxial and bifacial necrosis with more numerous lesions on the abaxial surface. Abaxial and bifacial necrosis were characterized by injured spongy, and spongy plus palisade cells, respectively. The percent of injured cell types were the same in both cultivars, but the absolute number of cells injured was greater in Cherokee than Norchip. Two types of cell injury were observed in necrotic lesions. One type of injury was characterized by collapsed, basophilic cells and the other by intact, basophilic cells. The ozone response of isolated leaf protoplasts of the two cultivars was similar. Two types of protoplast injury were observed, one characterized by lysis and the other by reduced staining with fluorescein diacetate. Maximum protoplast response to ozone was observed within the first 5 minutes of a 15 minute exposure. Little additional protoplast response occurred after 10 minutes.

Illman, B.L.

1983-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ozone monitoring instrument" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

UW SCHOOL OF PHARMACY INSTRUMENTATION COMMITTEE  

E-Print Network [OSTI]

UW SCHOOL OF PHARMACY INSTRUMENTATION COMMITTEE 2013-2014 Warren Heideman (chair) Mass spec users-related activities of the School. 4. Provide input and advice to the Dean on issues of importance to the AIC the research enterprise within the School of Pharmacy, across campus, and in the scientific community such as

Sheridan, Jennifer

342

Integrated polymerase chain reaction/electrophoresis instrument  

DOE Patents [OSTI]

A new approach and instrument for field identification of micro-organisms and DNA fragments using a small and disposable device containing integrated polymerase chain reaction (PCR) enzymatic reaction wells, attached capillary electrophoresis (CE) channels, detectors, and read-out all on/in a small hand-held package. The analysis instrument may be made inexpensively, for example, of plastic, and thus is disposable, which minimizes cross contamination and the potential for false positive identification between samples. In addition, it is designed for multiple users with individual applications. The integrated PCR/CE is manufactured by the PCR well and CE channels are "stamped" into plastic depressions where conductive coatings are made in the wells and ends of the CE microchannels to carry voltage and current to heat the PCR reaction mixtures and simultaneously draw DNA bands up the CE channels. Light is transmitted through the instrument at appropriate points and detects PCR bands and identifies DNA fragments by size (retention time) and quantifies each by the amount of light generated as each phototransistor positioned below each CE channel detects a passing band. The instrument is so compact that at least 100 PCR/CE reactions/analyses can be performed easily on one detection device.

Andresen, Brian D. (Livermore, CA)

2000-01-01T23:59:59.000Z

343

Regulative and voluntary instruments for responsible forest  

E-Print Network [OSTI]

carrotssermonssticks PES Comand and control Taxes and subsibies ­ Directness + Education ­Useofeconomicincentives,700 ha di farmland producing corn converted to organic · 92% of the area involved in the program · 200) A similar type of classification " Regulative instruments promoted by public institutions: international

Pettenella, Davide

344

Cooling the dark energy camera instrument  

SciTech Connect (OSTI)

DECam, camera for the Dark Energy Survey (DES), is undergoing general design and component testing. For an overview see DePoy, et al in these proceedings. For a description of the imager, see Cease, et al in these proceedings. The CCD instrument will be mounted at the prime focus of the CTIO Blanco 4m telescope. The instrument temperature will be 173K with a heat load of 113W. In similar applications, cooling CCD instruments at the prime focus has been accomplished by three general methods. Liquid nitrogen reservoirs have been constructed to operate in any orientation, pulse tube cryocoolers have been used when tilt angles are limited and Joule-Thompson or Stirling cryocoolers have been used with smaller heat loads. Gifford-MacMahon cooling has been used at the Cassegrain but not at the prime focus. For DES, the combined requirements of high heat load, temperature stability, low vibration, operation in any orientation, liquid nitrogen cost and limited space available led to the design of a pumped, closed loop, circulating nitrogen system. At zenith the instrument will be twelve meters above the pump/cryocooler station. This cooling system expected to have a 10,000 hour maintenance interval. This paper will describe the engineering basis including the thermal model, unbalanced forces, cooldown time, the single and two-phase flow model.

Schmitt, R.L.; Cease, H.; /Fermilab; DePoy, D.; /Ohio State U.; Diehl, H.T.; Estrada, J.; Flaugher, B.; /Fermilab; Kuhlmann, S.; /Ohio State U.; Onal, Birce; Stefanik, A.; /Fermilab

2008-06-01T23:59:59.000Z

345

Utility Indifference Pricing of Credit Instruments  

E-Print Network [OSTI]

in conformity with the requirements for the degree of Doctor of Philosophy Graduate Department of Mathematics Instruments Georg Sigloch Doctor of Philosophy Graduate Department of Mathematics University of Toronto 2009 consequences of being exposed to credit risk. In this thesis we address these issues by pricing credit

Jaimungal, Sebastian

346

ACRF Instrumentation Status: New, Current, and Future - April 2008  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

JW Voyles

2008-05-01T23:59:59.000Z

347

ACRF Instrumentation Status: New, Current, and Future July 2006  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development. New information is highlighted in blue text.

JC Liljegren

2006-07-01T23:59:59.000Z

348

ACRF Instrumentation Status: New, Current, and Future February 2009  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

JW Voyles

2009-02-15T23:59:59.000Z

349

ACRF Instrumentation Status: New, Current, and Future September 2006  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development. New information is highlighted in blue text.

JC Liljegren

2006-09-01T23:59:59.000Z

350

ARM Climate Research Facility Monthly Instrument Report May 2010  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

Voyles, JW

2010-06-21T23:59:59.000Z

351

ACRF Instrumentation Status: New, Current, and Future - November 2008  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

JW Voyles

2008-12-01T23:59:59.000Z

352

ACRF Instrumentation Status: New, Current, and Future - May 2008  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

JW Voyles

2008-05-01T23:59:59.000Z

353

ACRF Instrumentation Status: New, Current, and Future - August 2008  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

JW Voyles

2008-09-01T23:59:59.000Z

354

ARM Climate Research Facility Instrumentation Status and Information October 2009  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

JW Voyles

2009-10-01T23:59:59.000Z

355

ARM Climate Research Facility Monthly Instrument Report August 2010  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

Voyles, JW

2010-09-28T23:59:59.000Z

356

ACRF Instrumentation Status: New, Current, and Future - September 2008  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

JW Voyles

2008-10-15T23:59:59.000Z

357

ARM Climate Research Facility Instrumentation Status and Information December 2009  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

JW Voyles

2010-12-30T23:59:59.000Z

358

ARM Climate Research Facility Monthly Instrument Report June 2010  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

Voyles, JW

2010-07-13T23:59:59.000Z

359

ACRF Instrumentation Status: New, Current, and Future - July 2008  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

JW Voyles

2008-07-01T23:59:59.000Z

360

ARM Climate Research Facility Monthly Instrument Report July 2010  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

Voyles, JW

2010-08-18T23:59:59.000Z

Note: This page contains sample records for the topic "ozone monitoring instrument" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

ARM Climate Research Facility Instrumentation Status and Information March 2010  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

Voyles, JW

2010-04-19T23:59:59.000Z

362

ARM Climate Research Facility Instrumentation Status and Information January 2010  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

JW Voyles

2010-02-28T23:59:59.000Z

363

ARM Climate Research Facility Instrumentation Status and Information February 2010  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

Voyles, JW

2010-03-25T23:59:59.000Z

364

ACRF Instrumentation Status: New, Current, and Future August 2006  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development. New information is highlighted in blue text.

JC Liljegren

2006-08-01T23:59:59.000Z

365

ACRF Instrumentation Status: New, Current, and Future - December 2008  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

JW Voyles

2009-01-15T23:59:59.000Z

366

ACRF Instrumentation Status: New, Current, and Future - June 2008  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

JW Voyles

2008-07-01T23:59:59.000Z

367

ARM Climate Research Facility Instrumentation Status and Information April 2010  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

Voyles, JW

2010-05-15T23:59:59.000Z

368

ACRF Instrumentation Status: New, Current, and Future March 2009  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

JW Voyles

2009-03-15T23:59:59.000Z

369

ACRF Instrumentation Status: New, Current, and Future - October 2008  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

JW Voyles

2008-10-01T23:59:59.000Z

370

ACRF Instrumentation Status: New, Current, and Future - January 2009  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

JW Voyles

2009-03-02T23:59:59.000Z

371

ARM Climate Research Facility Monthly Instrument Report September 2010  

SciTech Connect (OSTI)

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

Voyles, JW

2010-10-18T23:59:59.000Z

372

Transmission Line Security Monitor  

ScienceCinema (OSTI)

The Transmission Line Security Monitor is a multi-sensor monitor that mounts directly on high-voltage transmission lines to detect, characterize and communicate terrorist activity, human tampering and threatening conditions around support towers. For more information about INL's critical infrastructure protection research, visit http://www.facebook.com/idahonationallaboratory.

None

2013-05-28T23:59:59.000Z

373

SINGLE-CRYSTAL SAPPHIRE OPTICAL FIBER SENSOR INSTRUMENTATION  

SciTech Connect (OSTI)

Accurate measurement of temperature is essential for the safe and efficient operation and control of a wide range of industrial processes. Appropriate techniques and instrumentation are needed depending on the temperature measurement requirements in different industrial processes and working environments. Harsh environments are common in many industrial applications. These harsh environments may involve extreme physical conditions, such as high-temperature, high-pressure, corrosive agents, toxicity, strong electromagnetic interference, and high-energy radiation exposure. Due to these severe environmental conditions, conventional temperature sensors are often difficult to apply. This situation has opened a new but challenging opportunity for the sensor society to provide robust, high-performance, and cost-effective temperature sensors capable of operating in those harsh environments. The focus of this research program has been to develop a temperature measurement system for temperature measurements in the primary and secondary stages of slagging gasifiers. For this application the temperature measurement system must be able to withstand the extremely harsh environment posed by the high temperatures and corrosive agents present in these systems. Real-time, accurate and reliable monitoring of temperature for the coal gasification process is important to realize the full economic potential of these gasification systems. Long life and stability of operation in the high temperature environment is essential for the temperature measurement system to ensure the continuous running of the coal gasification system over the long term. In this high temperature and chemically corrosive environment, rather limited high temperature measurement techniques such as high temperature thermocouples and optical/acoustic pyrometers are available, each with their own limitations. In this research program, five different temperature sensing schemes based on the single crystal sapphire material were thoroughly investigated to determine an optimal approach for on-line, real-time, reliable, long-term monitoring of temperatures inside the coal gasification environment. Among these were a sapphire fiber extrinsic Fabry-Perot interferometric (EFPI) sensor; an intensity-measurement based polarimetric sapphire sensor and a broadband polarimetric differential interferometric (BPDI) sapphire sensor. Based on the current evaluation and analysis of the experimental results, the broadband polarimetric differential interferometric (BPDI) sensor system was chosen for further prototype instrumentation development because of it's superior performance compared to the other systems. This approach is based on the self-calibrating measurement of the optical path length differences in a single-crystal sapphire disk, which is a function of both the temperature dependent birefringence and the temperature dependent dimensional changes.

A. Wang; G. Pickrell; R. May

2002-09-10T23:59:59.000Z

374

SINGLE-CRYSTAL SAPPHIRE OPTICAL FIBER SENSOR INSTRUMENTATION  

SciTech Connect (OSTI)

Accurate measurement of temperature is essential for the safe and efficient operation and control of a wide range of industrial processes. Appropriate techniques and instrumentation are needed depending on the temperature measurement requirements in different industrial processes and working environments. Harsh environments are common in many industrial applications. These harsh environments may involve extreme physical conditions, such as high-temperature, high-pressure, corrosive agents, toxicity, strong electromagnetic interference, and high-energy radiation exposure. Due to these severe environmental conditions, conventional temperature sensors are often difficult to apply. This situation has opened a new but challenging opportunity for the sensor society to provide robust, high-performance, and cost-effective temperature sensors capable of operating in those harsh environments. The focus of this research program has been to develop a temperature measurement system for temperature measurements in the primary and secondary stages of slagging gasifiers. For this application the temperature measurement system must be able to withstand the extremely harsh environment posed by the high temperatures and corrosive agents present in these systems. Real-time, accurate and reliable monitoring of temperature for the coal gasification process is important to realize the full economic potential of these gasification systems. Long life and stability of operation in the high temperature environment is essential for the temperature measurement system to ensure the continuous running of the coal gasification system over the long term. In this high temperature and chemically corrosive environment, rather limited high temperature measurement techniques such as high temperature thermocouples and optical/acoustic pyrometers are available, each with their own limitations. In this research program, five different temperature sensing schemes based on the single crystal sapphire material were thoroughly investigated to determine an optimal approach for on-line, real-time, reliable, long-term monitoring of temperatures inside the coal gasification environment. Among these were a sapphire fiber extrinsic Fabry-Perot interferometric (EFPI) sensor; an intensity-measurement based polarimetric sapphire sensor and a broadband polarimetric differential interferometric (BPDI) sapphire sensor. Based on the current evaluation and analysis of the experimental results, the BPDI sensor system was chosen for further prototype instrumentation development because of it's superior performance compared to the other systems. This approach is based on the self-calibrating measurement of the optical path length differences in a single-crystal sapphire disk, which is a function of both the temperature dependent birefringence and the temperature dependent dimensional changes.

A. Wang; G. Pickrell; R. May

2002-10-18T23:59:59.000Z

375

Optimization of stabilized leachate treatment using ozone/persulfate in the advanced oxidation process  

SciTech Connect (OSTI)

Highlights: ? Ozone and persulfate reagent (O{sub 3}/S{sub 2}O{sub 8}{sup 2-}) was used to treat stabilized leachate. ? Central composite design (CCD) with response surface methodology (RSM) was applied. ? Operating variables including ozone and persulfate dosage, pH variance, and reaction time. ? Optimum removal of COD, color, and NH{sub 3}–N was 72%, 96%, and 76%, respectively. ? A good value of ozone consumption (OC) obtained with 0.60 (kg O{sub 3}/kg COD). - Abstract: The objective of this study was to investigate the performance of employing persulfate reagent in the advanced oxidation of ozone to treat stabilized landfill leachate in an ozone reactor. A central composite design (CCD) with response surface methodology (RSM) was applied to evaluate the relationships between operating variables, such as ozone and persulfate dosages, pH, and reaction time, to identify the optimum operating conditions. Quadratic models for the following four responses proved to be significant with very low probabilities (<0.0001): COD, color, NH{sub 3}–N, and ozone consumption (OC). The obtained optimum conditions included a reaction time of 210 min, 30 g/m{sup 3} ozone, 1 g/1 g COD{sub 0}/S{sub 2}O{sub 8}{sup 2-} ratio, and pH 10. The experimental results were corresponded well with predicted models (COD, color, and NH{sub 3}–N removal rates of 72%, 96%, and 76%, respectively, and 0.60 (kg O{sub 3}/kg COD OC). The results obtained in the stabilized leachate treatment were compared with those from other treatment processes, such as ozone only and persulfate S{sub 2}O{sub 8}{sup 2-} only, to evaluate its effectiveness. The combined method (i.e., O{sub 3}/S{sub 2}O{sub 8}{sup 2-}) achieved higher removal efficiencies for COD, color, and NH{sub 3}–N compared with other studied applications. Furthermore, the new method is more efficient than ozone/Fenton in advanced oxidation process in the treatment of the same studied leachate.

Abu Amr, Salem S. [School of Civil Engineering, Engineering Campus, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang (Malaysia); Aziz, Hamidi Abdul, E-mail: cehamidi@eng.usm.my [School of Civil Engineering, Engineering Campus, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang (Malaysia); Adlan, Mohd Nordin [School of Civil Engineering, Engineering Campus, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang (Malaysia)

2013-06-15T23:59:59.000Z

376

Evaluation of the Eberline AMS-3A and AMS-4 Beta continuous air monitors  

SciTech Connect (OSTI)

Eberline AMS-3A-1 and AMS-4 beta continuous air monitors were tested against the criteria set forth in the ANSI Standards N42.18, Specification and Performance of On-site Instrumentation for Continuously Monitoring Radioactivity in Effluents, and ANSI N42.17B, Performance Specification for Health Physics Instrumentation - Occupational Airborne Radioactivity Monitoring Instrumentation. ANSI N42.18 does not, in general, specify testing procedures for demonstrating compliance with the criteria set forth in the standard; therefore, wherever possible, the testing procedures given in ANSI N42.17B were adopted. In all cases, the more restrictive acceptance criteria and/or the more demanding test conditions of the two standards were used.

Johnson, M.L.; Sisk, D.R.

1996-03-01T23:59:59.000Z

377

Community Environmental Monitoring Program (CEMP) Data related to Air, Soil, and Water Monitoring around the Nevada Test Site  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

The Community Environmental Monitoring Program (CEMP) is a network of 29 monitoring stations located in communities surrounding and downwind of the Nevada Test Site (NTS) that monitor the airborne environment for manmade radioactivity that could result from NTS activities. The network stations, located in Nevada, Utah, and California are comprised of instruments that collect a variety of environmental radiological and meteorological data. The emphasis of the CEMP is to monitor airborne radioactivity and weather conditions, and make the results available to the public. Instrumentation that records these data is connected to a datalogger, and real-time radiation levels or weather conditions can immediately and easily be seen on a display at each station. These data are transmitted via direct or wireless internet connection, landline or cellular phone, or satellite transmission to DRI's Western Regional Climate Center in Reno, Nevada, and are updated as frequently as every 10 minutes on the World Wide Web at http://www.cemp.dri.edu. DOE and DRI also publish the results of the monitoring program and distribute these reports throughout the network community. The reports provide summaries of average values for each station and the entire network, and show deviations from the expected range values. [Copied from the CEMP website (Introduction) at http://www.cemp.dri.edu/cemp/moreinfo.html

378

Continuous Emissions Monitoring System Monitoring Plan for the Y-12 Steam Plant  

SciTech Connect (OSTI)

The Oak Ridge Y-12 National Security Complex (Y-12), managed by BWXT, is submitting this Continuous Emissions Monitoring System (CEMS) Monitoring Plan in conformance with the requirements of Title 40 of the U.S. Code of Federal Regulations (CFR) Part 75. The state of Tennessee identified the Y-12 Steam Plant in Oak Ridge, Tennessee, as a non-electrical generation unit (EGU) nitrogen oxides (NO{sub x}) budget source as a result of the NO{sub x} State Implementation Plan (SIP) under the Tennessee Department of Environment and Conservation (TDEC) Rule 1200-3-27. Following this introduction, the monitoring plan contains the following sections: CEMS details, NO{sub x} emissions, and quality assurance (QA)/quality control (QC). The following information is included in the attachments: fuel and flue gas diagram, system layout, data flow diagrams, Electronic Monitoring Plan printouts, vendor information on coal and natural gas feed systems, and the Certification Test Protocol. The Y-12 Steam Plant consists of four Wickes boilers. Each is rated at a maximum heat input capacity of 296.8 MMBtu/hour or 250,000 lb/hour of 250-psig steam. Although pulverized coal is the principal fuel, each of the units can fire natural gas or a combination of coal and gas. Each unit is equipped with a Joy Manufacturing Company reverse air baghouse to control particulate emissions. Flue gases travel out of the baghouse, through an induced draft fan, then to one of two stacks. Boilers 1 and 2 exhaust through Stack 1. Boilers 3 and 4 exhaust through Stack 2. A dedicated CEMS will be installed in the ductwork of each boiler, downstream of the baghouse. The CEMS will be designed, built, installed, and started up by URS Group, Inc. (URS). Data acquisition and handling will be accomplished using a data acquisition and handling system (DAHS) designed, built, and programmed by Environmental Systems Corporation (ESC). The installed CEMS will continuously monitor NO{sub x}, flue gas flowrate, and carbon dioxide (CO{sub 2}). The CEMS will be utilized to report emissions from each unit for each ozone season starting May 1, 2003. Each boiler has independent coal and natural gas metering systems. Coal is fed to each boiler by belt-type coal feeders. Each boiler has two dedicated coal feeders. Natural gas may be burned along with coal for flame stability. The boilers may also be fired on natural gas alone. Orifice meters measure the natural gas flow to each boiler.

None

2003-02-28T23:59:59.000Z

379

CEMs turn monitoring giant  

SciTech Connect (OSTI)

Crucial to complying with environmental regulations is selecting appropriate pollution control equipment to capture or destroy regulated pollutants. But just as important is selecting a continuous emissions monitoring system (CEM). CEMs play a dual role in an overall compliance strategy. On one hand, they identify the type and quantity of emissions at a source as a first step for determining which regulatory requirements and control technologies are applicable. They also provide ongoing emissions data to demonstrate compliance with air and other environmental regulations. Facilities are required to monitor their processes with CEMs, or a comparable technology, under several titles of the Clean Air Act Amendments of 1990. CEMs meet regulatory requirements if they include a SO[sub 2] concentration monitor, nitrogen oxides (NO[sub x]) concentration monitor, volumetric flow monitor, opacity monitor, diluent gas monitor and data acquisition and handling system. The entire system and each subsystem has to be installed and certified before it can be used for compliance. A written quality assurance/quality control (QA/QC) plan for the CEMs must accompany the permit application. The acid rain rules also impose performance standards and frequent calibration checks to ensure the integrity of CEMs data.

White, J.R. (KVB/Analect, Irvine, CA (United States))

1993-08-01T23:59:59.000Z

380

High-temperature Pump Monitoring - High-temperature ESP Monitoring...  

Broader source: Energy.gov (indexed) [DOE]

7 4.4.4 High-temperature Pump Monitoring - High-temperature ESP Monitoring Presentation Number: 018 Investigator: Dhruva, Brindesh (Schlumberger Technology Corp.) Objectives: To...

Note: This page contains sample records for the topic "ozone monitoring instrument" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Environmental monitoring plan - environmental monitoring section. Revision 1  

SciTech Connect (OSTI)

This report presents the environmental monitoring plan for the Lawrence Livermore National Laboratory. A site characterization is provided along with monitoring and measurement techniques and quality assurance measures.

Wilt, G.C. [ed.; Tate, P.J.; Brigdon, S.L. [and others

1994-11-01T23:59:59.000Z

382

Solar Energy Research Center Instrumentation Facility  

SciTech Connect (OSTI)

SOLAR ENERGY RESEARCH CENTER INSTRUMENTATION FACILITY The mission of the Solar Energy Research Center (UNC SERC) at the University of North Carolina at Chapel Hill (UNC-CH) is to establish a world leading effort in solar fuels research and to develop the materials and methods needed to fabricate the next generation of solar energy devices. We are addressing the fundamental issues that will drive new strategies for solar energy conversion and the engineering challenges that must be met in order to convert discoveries made in the laboratory into commercially available devices. The development of a photoelectrosynthesis cell (PEC) for solar fuels production faces daunting requirements: (1) Absorb a large fraction of sunlight; (2) Carry out artificial photosynthesis which involves multiple complex reaction steps; (3) Avoid competitive and deleterious side and reverse reactions; (4) Perform 13 million catalytic cycles per year with minimal degradation; (5) Use non-toxic materials; (6) Cost-effectiveness. PEC efficiency is directly determined by the kinetics of each reaction step. The UNC SERC is addressing this challenge by taking a broad interdisciplinary approach in a highly collaborative setting, drawing on expertise across a broad range of disciplines in chemistry, physics and materials science. By taking a systematic approach toward a fundamental understanding of the mechanism of each step, we will be able to gain unique insight and optimize PEC design. Access to cutting-edge spectroscopic tools is critical to this research effort. We have built professionally-staffed facilities equipped with the state-of the-art instrumentation funded by this award. The combination of staff, facilities, and instrumentation specifically tailored for solar fuels research establishes the UNC Solar Energy Research Center Instrumentation Facility as a unique, world-class capability. This congressionally directed project funded the development of two user facilities: TASK 1: SOLAR DEVICE FABRICATION LABORATORY DEVELOPMENT The space allocated for this laboratory was �¢����shell space�¢��� that required an upfit in order to accommodate nano-fabrication equipment in a quasi-clean room environment. This construction project (cost $279,736) met the non-federal cost share requirement of $250,000 for this award. The central element of the fabrication laboratory is a new $400,000+ stand-alone system, funded by other sources, for fabricating and characterizing photovoltaic devices, in a state-of-the-art nanofabrication environment. This congressionally directed project also included the purchase of an energy dispersive x-ray analysis (EDX) detector for a pre-existing transmission electron microscope (TEM). This detector allows elemental analysis and elemental mapping of materials used to fabricate solar energy devices which is a key priority for our research center. TASK 2: SOLAR ENERGY SPECTROSCOPY LABORATORY DEVELOPMENT (INSTRUMENTATION) This laboratory provides access to modern spectroscopy and photolysis instrumentation for characterizing devices, materials and components on time scales ranging from femtoseconds to seconds and for elucidating mechanisms. The goals of this congressionally directed project included the purchase and installation of spectroscopy and photolysis instrumentation that would substantially and meaningfully enhance the capabilities of this laboratory. Some changes were made to the list of equipment proposed in the original budget. These changes did not represent a change in scope, approach or aims of this project. All of the capabilities and experiments represented in the original budget were maintained. The outcome of this Congressionally Directed Project has been the development of world-class fabrication and spectroscopy user facilities for solar fuels research at UNC-CH. This award has provided a significant augmentation of our pre-existing instrumentation capabilities which were funded by earlier UNC SERC projects, including the Energy Frontier

Meyer, Thomas, J.; Papanikolas, John, P.

2011-11-11T23:59:59.000Z

383

Signal conditioning circuitry design for instrumentation systems.  

SciTech Connect (OSTI)

This report details the current progress in the design, implementation, and validation of the signal conditioning circuitry used in a measurement instrumentation system. The purpose of this text is to document the current progress of a particular design in signal conditioning circuitry in an instrumentation system. The input of the signal conditioning circuitry comes from a piezoresistive transducer and the output will be fed to a 250 ksps, 12-bit analog-to-digital converter (ADC) with an input range of 0-5 V. It is assumed that the maximum differential voltage amplitude input from the sensor is 20 mV with an unknown, but presumably high, sensor bandwidth. This text focuses on a specific design; however, the theory is presented in such a way that this text can be used as a basis for future designs.

Larsen, Cory A.

2012-01-01T23:59:59.000Z

384

The Community Seismic Network and Quake-Catcher Network: enabling structural health monitoring through instrumentation by  

E-Print Network [OSTI]

SketchUp and an associated plug-in to matlab with recorded shaking data. When data are available from

Greer, Julia R.

385

Instrument Science Report Title: Focus monitoring and recommendation for secondary mirror move  

E-Print Network [OSTI]

optimal position in order to prevent signi cant image degradation in the UV. This criterion is indeed adequate for WFPC2, and it appears that some measurable degradation of the FOC images at the shortest

Sirianni, Marco

386

SCIAMACHY MONITORING FACTORS: OBSERVATION AND END-TO-END CORRECTION OF INSTRUMENT PERFORMANCE DEGRADATION  

E-Print Network [OSTI]

DEGRADATION Klaus Bramstedt1 , Stefan No¨el1 , Heinrich Bovensmann1 , John P. Burrows1 , Christophe Lerot2Y) is a grating spectrometer in the UV-Vis-NIR spectral range. SCIA- MACHY is part of the ENVISAT payload-factors. Key words: SCIAMACHY; m-factors; degradation; mon- itoring. 1. INTRODUCTION SCIAMACHY [1] is now seven

Tilstra, Gijsbert

387

A calibration and evaluation of Eberline Instrument Corporation's SPING-4 radiological air monitor  

E-Print Network [OSTI]

, not all channels have been calibrated over their full range. For example, the noble gas high-range detector has been response checked with low to medium-level Xenon-133 sources. Calibration curves for the full range of the detector have been generated... count rates. Detector channels which failed to function during portions of these tests are indicated with "failed low" or "failed high" notations where appropriate. 2. 3 Data Anal sis and Discussion of Results 2 . 3. 1 Al ha Particulate Detector...

Mayfield, Daniel Loyd

2012-06-07T23:59:59.000Z

388

Proposed Metering and Instrumentation Monitoring and Analysis Plan and Budget: Alamo Community College District  

E-Print Network [OSTI]

, it will be necessary to install additional software (PCAnywhere) or equipment (mainly another PC workstation) near the existing EMS computer terminals. ESL would also like Ethernet lines connected to the PC workstation so the system could be accessed via Internet...

O'Neal, D. L.; Carlson, K. A.; Sweeney, J., Jr.; Milligan, K.

2002-01-01T23:59:59.000Z

389

System and process for pulsed multiple reaction monitoring  

DOE Patents [OSTI]

A new pulsed multiple reaction monitoring process and system are disclosed that uses a pulsed ion injection mode for use in conjunction with triple-quadrupole instruments. The pulsed injection mode approach reduces background ion noise at the detector, increases amplitude of the ion signal, and includes a unity duty cycle that provides a significant sensitivity increase for reliable quantitation of proteins/peptides present at attomole levels in highly complex biological mixtures.

Belov, Mikhail E

2013-05-17T23:59:59.000Z

390

Survey your options: Continuous emissions monitoring  

SciTech Connect (OSTI)

In the US the public`s growing concern for air quality over the last twenty-five years has led to a complex patchwork of federal, state and local regulations aimed at controlling the emissions of pollutants from manufacturing facilities, power plants and municipal waste-incineration facilities. Like a shadow on the heels of a sprinter, the continuous emissions monitoring (CEM) industry has developed as a direct result of these regulations. In just two and a half decades, the CEM market has grown from a few specialized instrument firms to a billion-dollar business today--a remarkable feat considering there were few true CEM systems in existence prior to the enactment of the original US Clean Air Act of 1970. Despite the emergence of so many vendors offering so many different monitoring techniques, operators still face a host of complex issues when trying to select the right CEM. For facilities operating in today`s competitive, highly regulated environment, cost and performance pressures are stronger than ever. These pressures have forced CEM developers toward innovation to improve performance while containing capital and plant operating costs. This article provides an overview of the current status of CEM systems, and provides a glimpse at some of the new developments that will affect future monitoring configurations. Noteworthy new techniques include continuous emissions monitoring using Fourier Transform Infrared (FTIR) analyzers, laser-based opacity monitors, and the growing use of software-based, predictive CEMs. Also discussed is a new approach that overcomes the problems associated with measuring SO{sub 2} in fluegas streams downstream of NOx-reduction systems that use ammonia or urea injection.

White, J.R. [KVB/Analect, Irvine, CA (United States)

1995-07-01T23:59:59.000Z

391

Data processing unit and power system for the LANL REM instrument package. Final report  

SciTech Connect (OSTI)

The NEPSTP spacecraft needs highly reliable instrumentation to measure the nuclear reactor health and performance. These reactor measurements are essential for initial on-orbit phase operations and documentation of performance over time. Los Alamos National Laboratory (LANL), under the guidance of W. C. Feldman, principal investigator, has designed the Radiation Environment Monitoring (REM) package to meet these needs. The instrumentation package contains two neutron detectors, one gamma-ray detector, a data processing unit, and an instrument power system. The REM package is an integration of quick turn-around, state of the practice technology for detectors, data processors, and power systems. A significant portion of REM consists of subsystems with flight history. Southwest Research Institute (SwRI) has been tasked by LANL to design support electronics, including the Data Processing Unit (DPU) and Power System for REM. The goal for this project is to use technologies from current programs to speed up and simplify the design process. To meet these design goals, the authors use an open architecture VME bus for the DPU and derivatives of CASSINI power supplies for the instrument power system. To simplify integration and test activities, they incorporate a proven software development strategy and tool kits from outside vendors. The objective of this report is to illustrate easily incorporated system level designs for the DPU, power system and ground support electronics (GSE) in support of the important NEPSTP program.

Lockhart, W. [Southwest Research Inst., San Antonio, TX (United States). Instrumentation and Space Research Div.

1994-03-01T23:59:59.000Z

392

Evaluation of chemical sensors for in situ ground-water monitoring at the Hanford Site  

SciTech Connect (OSTI)

This report documents a preliminary review and evaluation of instrument systems and sensors that may be used to detect ground-water contaminants in situ at the Hanford Site. Three topics are covered in this report: (1) identification of a group of priority contaminants at Hanford that could be monitored in situ, (2) a review of current instrument systems and sensors for environmental monitoring, and (3) an evaluation of instrument systems that could be used to monitor Hanford contaminants. Thirteen priority contaminants were identified in Hanford ground water, including carbon tetrachloride and six related chlorinated hydrocarbons, cyanide, methyl ethyl ketone, chromium (VI), fluoride, nitrate, and uranium. Based on transduction principles, chemical sensors were divided into four classes, ten specific types of instrument systems were considered: fluorescence spectroscopy, surface-enhanced Raman spectroscopy (SERS), spark excitation-fiber optic spectrochemical emission sensor (FOSES), chemical optrodes, stripping voltammetry, catalytic surface-modified ion electrode immunoassay sensors, resistance/capacitance, quartz piezobalance and surface acoustic wave devices. Because the flow of heat is difficult to control, there are currently no environmental chemical sensors based on thermal transduction. The ability of these ten instrument systems to detect the thirteen priority contaminants at the Hanford Site at the required sensitivity was evaluated. In addition, all ten instrument systems were qualitatively evaluated for general selectivity, response time, reliability, and field operability. 45 refs., 23 figs., 7 tabs.

Murphy, E.M.; Hostetler, D.D.

1989-03-01T23:59:59.000Z

393

New generation enrichment monitoring technology for gas centrifuge enrichment plants  

SciTech Connect (OSTI)

The continuous enrichment monitor, developed and fielded in the 1990s by the International Atomic Energy Agency, provided a go-no-go capability to distinguish between UF{sub 6} containing low enriched (approximately 4% {sup 235}U) and highly enriched (above 20% {sup 235}U) uranium. This instrument used the 22-keV line from a {sup 109}Cd source as a transmission source to achieve a high sensitivity to the UF{sub 6} gas absorption. The 1.27-yr half-life required that the source be periodically replaced and the instrument recalibrated. The instrument's functionality and accuracy were limited by the fact that measured gas density and gas pressure were treated as confidential facility information. The modern safeguarding of a gas centrifuge enrichment plant producing low-enriched UF{sub 6} product aims toward a more quantitative flow and enrichment monitoring concept that sets new standards for accuracy stability, and confidence. An instrument must be accurate enough to detect the diversion of a significant quantity of material, have virtually zero false alarms, and protect the operator's proprietary process information. We discuss a new concept for advanced gas enrichment assay measurement technology. This design concept eliminates the need for the periodic replacement of a radioactive source as well as the need for maintenance by experts. Some initial experimental results will be presented.

Ianakiev, Kiril D [Los Alamos National Laboratory; Alexandrov, Boian S. [Los Alamos National Laboratory; Boyer, Brian D. [Los Alamos National Laboratory; Hill, Thomas R. [Los Alamos National Laboratory; Macarthur, Duncan W. [Los Alamos National Laboratory; Marks, Thomas [Los Alamos National Laboratory; Moss, Calvin E. [Los Alamos National Laboratory; Sheppard, Gregory A. [Los Alamos National Laboratory; Swinhoe, Martyn T. [Los Alamos National Laboratory

2008-06-13T23:59:59.000Z

394

Monitoring lining and hearth conditions at Inland`s No. 7 blast furnace  

SciTech Connect (OSTI)

The paper describes: furnace statistics; mini-reline undertaken in November, 1993; the stack condition; throat gunning; stabilizing the graphite bricks; the hearth condition; reactions to temperature excursions; future instrumentation; and hot blast system areas of concern. The present data from monitoring systems and inspections indicate that the furnace should be able to operate well beyond the expectation for the 1993 mini-reline (3--5 years) with: (1) consistent, high quality raw materials; (2) instrumentation, diagnostic, remedial, and preventative techniques developed; and (3) stopping quickly any water leaks into the furnace. The longevity of this campaign has undoubtedly been a result of this monitoring program.

Quisenberry, P.; Grant, M.; Carter, W.

1997-12-31T23:59:59.000Z

395

Radiation environment along the INTEGRAL orbit measured with the IREM monitor  

E-Print Network [OSTI]

The INTEGRAL Radiation Environment Monitor (IREM) is a payload supporting instrument on board the INTEGRAL satellite. The monitor continually measures electron and proton fluxes along the orbit and provides this information to the spacecraft on board data handler. The mission alert system broadcasts it to the payload instruments enabling them to react accordingly to the current radiation level. Additionally, the IREM conducts its autonomous research mapping the Earth radiation environment for the space weather program. Its scientific data are available for further analysis almost without delay.

W. Hajdas; P. Bühler; C. Eggel; P. Favre; A. Mchedlishvili; A. Zehnder

2003-08-15T23:59:59.000Z

396

ORISE: Media Analysis and Monitoring  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Media Analysis and Monitoring The Oak Ridge Institute for Science and Education (ORISE) uses comprehensive media analysis and monitoring tools to define media interest and the...

397

Instrument development continues in Oak Ridge  

SciTech Connect (OSTI)

Peer review panels composed of 80 external scientists recently visited Oak Ridge National Laboratory (ORNL) to review almost 700 proposals for experiments on 23 instruments at the Spallation Neutron Source (SNS) and High Flux Isotope Reactor (HFIR). These were proposed for the time period from January-June 2012. About 40% of the proposals were approved for beam time and 20% were placed on an alternate list if time becomes available. The Hybrid Spectrometer HYSPEC at SNS began its commissioning in September 2011. HYSPEC is otpimized for studying low energy dynamics in single-crystal samples using a broad variety of sample environments, and is equipped with a polarization analysis capability. It is expected to be available for users on a limited basis in the second half of 2012. The detector tank of CORELLI has been installed on beamline 9 at SNS. Now that the tank is in place, banks of neutron detectors and boron carbide shielding will be installed around the interior. CORELLI is optimized to probe complex disorder in crystalline materials through diffuse scattering from single-crystal samples. It will begin commissioning in 2014. CORELLI is one of four instruments being developed under the SING II (SNS Instruments Next Generation II) project. The others are the Macromolecular Neutron Diffractometer (MANDI), the Vibrational Spectrometer (VISION, scheduled to begin commissioning in 2012), and the Time of Flight Ultra Small Angle Neutron Scattering Instrument (TOF-USANS). The single crystal neutron diffractometer IMAGINE, was deliverd to HFIR in October 2011. Preliminary testing has been carried out. IMAGINE will provide atomic resolution information on chemical, organic, metallo-organic and protein single crystals that will enable their chemical, physical and biological structure and function to be understood. This instrument will benefit scientists with interests in pharmaceuticals, minerals and other inorganic crystals, small molecules, molecular organo-metallic crystals and metal-organic frameworks (MOFs) molecular crystal structures. The quasi-Laue geometry, combined with a large solid angle detector, will enable rapid data collection from crystals with volume < 1mm{sup 1} and unit cell < 100 {angstrom}. Construction and installation of the optical system is in progress. Commissioning is expected to start in April 2012.

Ekkebus, Allen E [ORNL

2012-01-01T23:59:59.000Z

398

Overview of ozone human exposure and health risk analyses used in the U.S. EPA's review of the ozone air quality standard.  

SciTech Connect (OSTI)

This paper presents an overview of the ozone human exposure and health risk analyses developed under sponsorship of the U.S. Environmental Protection Agency (EPA). These analyses are being used in the current review of the national ambient air quality standards (NAAQS) for ozone. The analyses consist of three principal steps: (1) estimating short-term ozone exposure for particular populations (exposure model); (2) estimating population response to exposures or concentrations (exposure-response or concentration-response models); and (3) integrating concentrations or exposure with concentration-response or exposure-response models to produce overall risk estimates (risk model). The exposure model, called the probabilistic NAAQS exposure model for ozone (pNEM/03), incorporates the following factors: hourly ambient ozone concentrations; spatial distribution of concentrations; ventilation state of individuals at time of exposure; and movement of people through various microenvironments (e.g., outdoors, indoors, inside a vehicle) of varying air quality. Exposure estimates are represented by probability distributions. Exposure-response relationships have been developed for several respiratory symptom and lung function health effects, based on the results of controlled human exposure studies. These relationships also are probabilistic and reflect uncertainties associated with sample size and variability of response among subjects. The analyses also provide estimates of excess hospital admissions in the New York City area based on results from an epidemiology study. Overall risk results for selected health endpoints and recently analyzed air quality scenarios associated with alternative 8-hour NAAQS and the current 1-hour standard for outdoor children are used to illustrate application of the methodology.

Whitfield, R. G.

1999-03-04T23:59:59.000Z

399

Structural Health Monitoring Tools  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Security, LLC 1 LA-CC-10-032 LA-UR 10-01259 1 Introduction to SHMTools SHMTools is a MATLAB package that facilitates the construction of structural health monitoring (SHM)...

400

Monitored Retrievable Storage Background  

Broader source: Energy.gov [DOE]

`The U.S. Government is seeking a site for a monitored retrievable storage facility (MRS). Employing proven technologies used in this country and abroad, the MRS will be an Integral part of the...

Note: This page contains sample records for the topic "ozone monitoring instrument" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Federal Radiological Monitoring and Assessment Center Monitoring Manual Volume 2, Radiation Monitoring and Sampling  

SciTech Connect (OSTI)

The FRMAC Monitoring and Sampling Manual, Volume 2 provides standard operating procedures (SOPs) for field radiation monitoring and sample collection activities that are performed by the Monitoring group during a FRMAC response to a radiological emergency.

NSTec Aerial Measurement Systems

2012-07-31T23:59:59.000Z

402

Monitoring Energy Losses  

E-Print Network [OSTI]

-line performance not new concepts. Many recently designed power plants include monitoring systems more attractive and accessible. By using an extensive computer-based on-line data acquistion system to such a system, plant operators can improve plant heat rate... are collected manually by operating or test A performance monitoring system needs pressure, personnel. Data reduction, analysis, and temperature, flow, power, and fuel data to calculate heat rate performance calculations are also manually and heat rate...

Eulinger, R. D.

403

Structure function monitor  

DOE Patents [OSTI]

Methods and apparatus for a structure function monitor provide for generation of parameters characterizing a refractive medium. In an embodiment, a structure function monitor acquires images of a pupil plane and an image plane and, from these images, retrieves the phase over an aperture, unwraps the retrieved phase, and analyzes the unwrapped retrieved phase. In an embodiment, analysis yields atmospheric parameters measured at spatial scales from zero to the diameter of a telescope used to collect light from a source.

McGraw, John T. (Placitas, NM); Zimmer, Peter C. (Albuquerque, NM); Ackermann, Mark R. (Albuquerque, NM)

2012-01-24T23:59:59.000Z

404

Fading of alizarin and related artists's pigments by atmospheric ozone: reaction products and mechanisms  

SciTech Connect (OSTI)

The colorants alizarin and Alizarin Crimson (a calcium-aluminum lake pigment) and their simple structural homologue anthraquinone were deposited on silica gel, cellulose, and Teflon substrates and exposed in the dark to ozone in purified air (approx.0.4 ppm O/sub 3/ for 95 days and approx.10 ppm O/sub 3/ for 18-80 h). Exposed and control samples were analyzed by mass spectrometry. Alizarin Crimson reacted with ozone on all substrates, yielding phthalic acid (major), benzoic acid (minor), and other minor and unidentified products. Anthraquinone did not react with ozone irrespective of conditions. Alizarin did not react on Teflon or cellulose but reacted on silica gel to yield phthalic acid (major) and other products. A chemical mechanism responsible for the fading of these alizarin-related colorants by ozone is suggested that is consistent with the products distribution, the observed reactivity sequence, and the observed substrate-specific effects. The possible application of this work to predicting the ozone fastness of other alizarin-related pigments is discussed briefly. 33 references, 5 figures.

Grosjean, D.; Whitmore, P.M.; De Moor, C.P.; Cass, G.R.; Druzik, J.R.

1987-07-01T23:59:59.000Z

405

Instrumentation for multiaxial mechanical testing of inhomogeneous elastic membranes  

E-Print Network [OSTI]

This thesis presents the design, development, and construction of an instrument for biaxial mechanical testing of inhomogeneous elastic membranes. The instrument incorporates an arrangement of linear motion stages for ...

Herrmann, Ariel Marc

2006-01-01T23:59:59.000Z

406

CU-LASP Test Facilities ! and Instrument Calibration Capabilities"  

E-Print Network [OSTI]

­ Star tracker ­ Solar position sensors ­ Test & calibration applications ­ End-to-end instrument;Total Solar Irradiance Radiometer Facility (TRF) · Total Solar Irradiance (TSI) instrument calibrations

Mojzsis, Stephen J.

407

Construction and testing of the instrument for neutron holographic study at the Budapest Research Reactor  

SciTech Connect (OSTI)

Neutron scattering device dedicated to neutron holography experiments is described. The device is operating at a constant wavelength prepared by a double focusing monochromator. It is equipped by highly efficient shielding, proper collimator, Eulerian cradle, monitor detector, gamma-ray, and neutron detectors as well. Relevant software serves as control for the measurement and data collection. The harmonized application of the components enumerated above makes our device extremely efficient and unparalleled. Two atomic resolution neutron holographic experiments carried out illustrate the efficiency and power of the instrument.

Marko, Marton; Toeroek, Gyula; Cser, Laszlo [Department of Neutron Spectroscopy, Research Institute for Solid State Physics and Optics, P.O.B. 49, H-1525 Budapest (Hungary); Szakal, Alex [Department of Neutron Spectroscopy, Research Institute for Solid State Physics and Optics, P.O.B. 49, H-1525 Budapest (Hungary); Budapest University of Technology and Economics, Muegyetem rakpart 1-3, H-1113 Budapest (Hungary)

2010-10-15T23:59:59.000Z

408

Sensitivity of China's ozone air quality to 2000-2050 global changes of1 climate and emissions2  

E-Print Network [OSTI]

1 Sensitivity of China's ozone air quality to 2000-2050 global changes of1 climate and emissions2 3 emissions of ozone precursors. The climate and16 emission effect in combination will increase afternoon mean increases18 in global (excluding China) anthropogenic emissions, 37% to Chinese emission19 increases

Wu, Shiliang

409

A numerical study of mass transfer of ozone dissolution in bubble plumes with an Euler-Lagrange Method  

E-Print Network [OSTI]

, as a model problem for a water purification system. The effect of bubble diameter and plume structure on mass are widely observed and exploited in engineering applications, with water purification using ozone bubble the mass transfer process of ozone dissolution in a bubble plume inside a rectangular water tank

Huang, Huaxiong

410

Impact of ozone on indoor air quality: a preliminary field study M. Nicolas, O. Ramalho, F. Maupetit  

E-Print Network [OSTI]

indoor air quality (IAQ) since they produce secondary pollutants, mainly aldehydes which are known to document the impact on IAQ of outdoor ozone during summer air pollution episodes. For this purpose, a oneImpact of ozone on indoor air quality: a preliminary field study M. Nicolas, O. Ramalho, F

Boyer, Edmond

411

Implementation of instruments and facilities at the SGP CART site  

SciTech Connect (OSTI)

This report discusses the installation of instruments and trailers at the southern Great Plains Clouds and Radiation Testbed site.

Sisterson, D.L.; Wesely, M.L.

1994-02-01T23:59:59.000Z

412

Performance testing of multi-metal continuous emissions monitors. Appendix Volume 1  

SciTech Connect (OSTI)

This report contains appendices to the study of three prototype multi-metal continuous emission monitors (CEMs). The appendices are: Final report of the Diagnostic Instrumentation and Analytical Laboratory (DIAL) CEM developer team; Final report of Navy/Thermo Jarrell Ash Corp. CEM developer team; Final report of Sandia National Laboratories CEM developer team; Developer team comments; and Performance specification 10 -- Specifications and test procedures for multi-metals continuous monitoring systems in stationary sources.

Haas, W.J. Jr. [Ames Lab., IA (United States); French, N.B. [Sky+, Inc. (United States); Brown, C.H. [Oak Ridge National Lab., TN (United States); Burns, D.B. [Westinghouse Savannah River Co., Aiken, SC (United States); Lemieux, P.M.; Ryan, J.V. [National Risk Management Research Lab., Research Triangle Park, NC (United States); Priebe, S.J. [Idaho National Engineering and Environmental Lab., Idaho Falls, ID (United States); Waterland, L.R. [Acurex Environmental Corp. (United States)

1997-11-17T23:59:59.000Z

413

SP100i Syringe Pump WORLD PRECISION INSTRUMENTS 15  

E-Print Network [OSTI]

SP100i Syringe Pump WORLD PRECISION INSTRUMENTS 15 INSTRUCTION MANUAL Serial No._____________________ 8/94 World Precision Instruments, Inc. SP100i Syringe Pump Digital Infusion Syringe Pump #12;SP100i Syringe Pump WORLD PRECISION INSTRUMENTS 1 Contents GENERAL DESCRIPTION

Kleinfeld, David

414

Absolute instruments and perfect imaging in geometrical optics  

E-Print Network [OSTI]

Absolute instruments and perfect imaging in geometrical optics Tom´as Tyc, Lenka Herz symmetric absolute instruments that provide perfect imaging in the sense of geometrical optics. We derive to propose several new absolute instruments, in particular a lens providing a stigmatic image of an optically

Tyc, Tomas

415

Monitoring: The missing piece  

SciTech Connect (OSTI)

The U.S. National Environmental Policy Act (NEPA) of 1969 heralded in an era of more robust attention to environmental impacts resulting from larger scale federal projects. The number of other countries that have adopted NEPA's framework is evidence of the appeal of this type of environmental legislation. Mandates to review environmental impacts, identify alternatives, and provide mitigation plans before commencement of the project are at the heart of NEPA. Such project reviews have resulted in the development of a vast number of reports and large volumes of project-specific data that potentially can be used to better understand the components and processes of the natural environment and provide guidance for improved and efficient environmental protection. However, the environmental assessment (EA) or the more robust and intensive environmental impact statement (EIS) that are required for most major projects more frequently than not are developed to satisfy the procedural aspects of the NEPA legislation while they fail to provide the needed guidance for improved decision-making. While NEPA legislation recommends monitoring of project activities, this activity is not mandated, and in those situations where it has been incorporated, the monitoring showed that the EIS was inaccurate in direction and/or magnitude of the impact. Many reviews of NEPA have suggested that monitoring all project phases, from the design through the decommissioning, should be incorporated. Information gathered though a well-developed monitoring program can be managed in databases and benefit not only the specific project but would provide guidance how to better design and implement future activities designed to protect and enhance the natural environment. -- Highlights: • NEPA statutes created profound environmental protection legislative framework. • Contrary to intent, NEPA does not provide for definitive project monitoring. • Robust project monitoring is essential for enhanced environmental management. • Adaptive database framework is needed to accommodate project-monitoring data.

Bjorkland, Ronald, E-mail: r_bjorkland@hotmail.com

2013-11-15T23:59:59.000Z

416

MHD power plant instrumentation and control  

SciTech Connect (OSTI)

The Electric Power Research Institute (EPRI) has awarded a contract to the MHD Development Corporation (MDC) to develop instrumentation and control requirements and strategies for commercial MHD power plants. MDC subcontracted MSE to do the technical development required. MSE is being assisted by Montana State University (MSU) for the topping cycle development. A computer model of a stand-alone MHD/steam plant is being constructed. The plant is based on the plant design set forth in the MDC proposal to the Federal Clean Coal Technology 5 solicitation. It consists of an MHD topping plant, a Heat Recovery Seed Recovery (HRSR) plant, and a steam turbo-generator. The model is based on the computer code used for a study of the Corette plant retrofitted with an MHD plant. Additional control strategies, based on MHD testing results and current steam bottoming plant control data, will be incorporated. A model will be devised and implemented for automatic control of the plant. Requirements regarding instrumentation and actuators will be documented. Instrumentation and actuators that are not commercially available will be identified. The role and desired characteristics of an expert system in the automated control scheme is being investigated. Start-up and shutdown procedures will be studied and load change dynamic performance will be evaluated. System response to abnormal topping cycle and off-design system operation will be investigated. This includes use of MHD topping cycle models which couple gasdynamic and electrical behavior for the study of controlling of the MHD topping cycle. A curvefitter, which uses cubic Hermitian spline interpolation functions in as many as five dimensions, allows much more accurate reproduction of nonlinear, multidimensional functions. This project will be the first to investigate plant dynamics and control using as many as seven independent variables or control inputs to the MHD topping cycle.

Lofftus, D.; Rudberg, D. [MSE Inc., Butte, MT (United States); Johnson, R.; Hammerstrom, D. [Montana State Univ., Bozeman, MT (United States)

1993-12-31T23:59:59.000Z

417

Beam instrumentation for the Tevatron Collider  

SciTech Connect (OSTI)

The Tevatron in Collider Run II (2001-present) is operating with six times more bunches and many times higher beam intensities and luminosities than in Run I (1992-1995). Beam diagnostics were crucial for the machine start-up and the never-ending luminosity upgrade campaign. We present the overall picture of the Tevatron diagnostics development for Run II, outline machine needs for new instrumentation, present several notable examples that led to Tevatron performance improvements, and discuss the lessons for future colliders.

Moore, Ronald S.; Jansson, Andreas; Shiltsev, Vladimir; /Fermilab

2009-10-01T23:59:59.000Z

418

Curtis Instruments Inc | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:EnergyWisconsin:2003)Crowley County,Curran, Illinois:Instruments Inc Jump to:

419

Licenses Available in Analytical Instrumentation | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample6, 2011 LawrenceE CAnalytical Instrumentation SHARE

420

ARM - Campaign Instrument - 5mm-mwr  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert SouthwestTechnologies |NovemberARMContactsARMFacilitiesCERAgovInstruments5mm-mwr

Note: This page contains sample records for the topic "ozone monitoring instrument" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Position-sensitive radiation monitoring (surface contamination monitor). Innovative technology summary report  

SciTech Connect (OSTI)

The Shonka Research Associates, Inc. Position-Sensitive Radiation Monitor both detects surface radiation and prepares electronic survey map/survey report of surveyed area automatically. The electronically recorded map can be downloaded to a personal computer for review and a map/report can be generated for inclusion in work packages. Switching from beta-gamma detection to alpha detection is relatively simple and entails moving a switch position to alpha and adjusting the voltage level to an alpha detection level. No field calibration is required when switching from beta-gamma to alpha detection. The system can be used for free-release surveys because it meets the federal detection level sensitivity limits requires for surface survey instrumentation. This technology is superior to traditionally-used floor contamination monitor (FCM) and hand-held survey instrumentation because it can precisely register locations of radioactivity and accurately correlate contamination levels to specific locations. Additionally, it can collect and store continuous radiological data in database format, which can be used to produce real-time imagery as well as automated graphics of survey data. Its flexible design can accommodate a variety of detectors. The cost of the innovative technology is 13% to 57% lower than traditional methods. This technology is suited for radiological surveys of flat surfaces at US Department of Energy (DOE) nuclear facility decontamination and decommissioning (D and D) sites or similar public or commercial sites.

Not Available

1999-06-01T23:59:59.000Z

422

Photon beam position monitor  

DOE Patents [OSTI]

A photon beam position monitor is disclosed for use in the front end of a beamline of a high heat flux and high energy photon source such as a synchrotron radiation storage ring detects and measures the position and, when a pair of such monitors are used in tandem, the slope of a photon beam emanating from an insertion device such as a wiggler or an undulator inserted in the straight sections of the ring. The photon beam position monitor includes a plurality of spaced blades for precisely locating the photon beam, with each blade comprised of chemical vapor deposition (CVD) diamond with an outer metal coating of a photon sensitive metal such as tungsten, molybdenum, etc., which combination emits electrons when a high energy photon beam is incident upon the blade. Two such monitors are contemplated for use in the front end of the beamline, with the two monitors having vertically and horizontally offset detector blades to avoid blade ''shadowing''. Provision is made for aligning the detector blades with the photon beam and limiting detector blade temperature during operation. 18 figs.

Kuzay, T.M.; Shu, D.

1995-02-07T23:59:59.000Z

423

High Performance Network Monitoring  

SciTech Connect (OSTI)

Network Monitoring requires a substantial use of data and error analysis to overcome issues with clusters. Zenoss and Splunk help to monitor system log messages that are reporting issues about the clusters to monitoring services. Infiniband infrastructure on a number of clusters upgraded to ibmon2. ibmon2 requires different filters to report errors to system administrators. Focus for this summer is to: (1) Implement ibmon2 filters on monitoring boxes to report system errors to system administrators using Zenoss and Splunk; (2) Modify and improve scripts for monitoring and administrative usage; (3) Learn more about networks including services and maintenance for high performance computing systems; and (4) Gain a life experience working with professionals under real world situations. Filters were created to account for clusters running ibmon2 v1.0.0-1 10 Filters currently implemented for ibmon2 using Python. Filters look for threshold of port counters. Over certain counts, filters report errors to on-call system administrators and modifies grid to show local host with issue.

Martinez, Jesse E [Los Alamos National Laboratory

2012-08-10T23:59:59.000Z

424

Thermochemical Kinetics for Multireference Systems: Addition Reactions of Ozone  

SciTech Connect (OSTI)

The 1,3-dipolar cycloadditions of ozone to ethyne and ethene provide extreme examples of multireference singlet-state chemistry, and they are examined here to test the applicability of several approaches to thermochemical kinetics of systems with large static correlation. Four different multireference diagnostics are applied to measure the multireference characters of the reactants, products, and transition states; all diagnostics indicate significant multireference character in the reactant portion of the potential energy surfaces. We make a more complete estimation of the effect of quadruple excitations than was previously available, and we use this with CCSDT/CBS estimation of Wheeler et al. (Wheeler, S. E.; Ess, D. H.; Houk, K. N. J. Phys. Chem. A 2008, 112, 1798.) to make new best estimates of the van der Waals association energy, the barrier height, and the reaction energy to form the cycloadduct for both reactions. Comparing with these best estimates, we present comprehensive mean unsigned errors for a variety of coupled cluster, multilevel, and density functional methods. Several computational aspects of multireference reactions are considered: (i) the applicability of multilevel theory, (ii) the convergence of coupled cluster theory for reaction barrier heights, (iii) the applicability of completely renormalized coupled cluster methods to multireference systems, (iv) the treatment by density functional theory, (v) the multireference perturbation theory for multireference reactions, and (vi) the relative accuracy of scaling-type multilevel methods as compared with additive ones. It is found that scaling-type multilevel methods do not perform better than the additive-type multilevel methods. Among the 48 tested density functionals, only M05 reproduces the best estimates within their uncertainty. Multireference perturbation theory based on the complete-active-space reference wave functions constructed using a small number of reaction-specific active orbitals gives accurate forward barrier heights; however, it significantly underestimates reaction energies.

Zhao, Yan; Tishchenko, Oksana; Gour, Jeffrey R.; Li, Wei; Lutz, Jesse; Piecuch, Piotr; Truhlar, Donald G.

2009-05-14T23:59:59.000Z

425

A novel method for monitoring pipe wall thinning. Final report  

SciTech Connect (OSTI)

This report presents results from eight tasks which were formed to demonstrate commercial viability of a new technology for the early detection of corrosion damage. The tasks produced three products which are deployed to commercialize the technology: (1)Experimentally verified software package which allows instrument specification for wall thinning detection. (2) Eighteen months of field experience in the installation and monitoring of radioactive tracers for wall thinning. (3) Technology for environmental and process monitoring, which was not developed under this contract but evolved as a natural extension of the subject invention. Radioactive tracers are deployed to provide early seaming of corrosion attack on pipes and tanks. The results of this project clearly demonstrate that these monitors are ideal for harsh and difficult to access environments. It is believed that no other technology is capable of providing in situ wall thinning data in such environments. The early warning of wall thinning with radioactive tracers will be commercialized via licensing agreements. Power plants and refineries have the capabilities to deploy the technology which was developed and demonstrated under this project. Funds from licensing agreements will be invested in the establishment of a service to conduct the actual monitoring. This service will extend beyond corrosion monitoring to include environmental monitoring. Current environmental regulation and cleanup of polluted sites has created a market for low cost, in- situ, monitoring. Through its ownership of US Patents which offer the most economical means of monitoring vast areas for toxic compounds, the company is in a unique position to profit from the emerging new market. Negotiations are underweight with companies with existing sales and distribution outlets for the formation of joint ventures. Proposals for the AREA initiative and the DOE/SIR have been prepared in the area of environmental monitoring.

Hopenfeld, J.

1993-06-01T23:59:59.000Z

426

MICROHOLE TECHNOLOGY PROGRESS ON BOREHOLE INSTRUMENTATION DEVELOPMENT  

SciTech Connect (OSTI)

Microhole technology development is based on the premise that with advances in electronics and sensors, large conventional-diameter wells are no longer necessary for obtaining subsurface information. Furthermore, microholes offer an environment for improved substance measurement. The combination of deep microholes having diameters of 1-3/8 in. at their terminal depth and 7/8-in. diameter logging tools will comprise a very low cost alternative to currently available technology for deep subsurface characterization and monitoring.

J. ALBRIGHT

2000-09-01T23:59:59.000Z

427

Microfabricated BTU monitoring device for system-wide natural gas monitoring.  

SciTech Connect (OSTI)

The natural gas industry seeks inexpensive sensors and instrumentation to rapidly measure gas heating value in widely distributed locations. For gas pipelines, this will improve gas quality during transfer and blending, and will expedite accurate financial accounting. Industrial endusers will benefit through continuous feedback of physical gas properties to improve combustion efficiency during use. To meet this need, Sandia has developed a natural gas heating value monitoring instrument using existing and modified microfabricated components. The instrument consists of a silicon micro-fabricated gas chromatography column in conjunction with a catalytic micro-calorimeter sensor. A reference thermal conductivity sensor provides diagnostics and surety. This combination allows for continuous calorimetric determination with a 1 minute analysis time and 1.5 minute cycle time using air as a carrier gas. This system will find application at remote natural gas mining stations, pipeline switching and metering stations, turbine generators, and other industrial user sites. Microfabrication techniques will allow the analytical components to be manufactured in production quantities at a low per-unit cost.

Einfeld, Wayne; Manginell, Ronald Paul; Robinson, Alex Lockwood; Moorman, Matthew Wallace

2005-11-01T23:59:59.000Z

428

Secondary Pollutants from Ozone Reaction with Ventilation Filters and Degradation of Filter Media Additives  

SciTech Connect (OSTI)

Prior research suggests that chemical processes taking place on the surface of particle filters employed in buildings may lead to the formation of harmful secondary byproducts. We investigated ozone reactions with fiberglass, polyester, cotton/polyester and polyolefin filter media, as well as hydrolysis of filter media additives. Studies were carried out on unused media, and on filters that were installed for 3 months in buildings at two different locations in the San Francisco Bay Area. Specimens from each filter media were exposed to {approx}150 ppbv ozone in a flow tube under a constant flow of dry or humidified air (50percent RH). Ozone breakthrough was recorded for each sample over periods of {approx}1000 min; the ozone uptake rate was calculated for an initial transient period and for steady-state conditions. While ozone uptake was observed in all cases, we did not observe significant differences in the uptake rate and capacity for the various types of filter media tested. Most experiments were performed at an airflow rate of 1.3 L/min (face velocity = 0.013 m/s), and a few tests were also run at higher rates (8 to 10 L/min). Formaldehyde and acetaldehyde, two oxidation byproducts, were quantified downstream of each sample. Those aldehydes (m/z 31 and 45) and other volatile byproducts (m/z 57, 59, 61 and 101) were also detected in real-time using Proton-Transfer Reaction - Mass Spectrometry (PTR-MS). Low-ppbv byproduct emissions were consistently higher under humidified air than under dry conditions, and were higher when the filters were loaded with particles, as compared with unused filters. No significant differences were observed when ozone reacted over various types of filter media. Fiberglass filters heavily coated with impaction oil (tackifier) showed higher formaldehyde emissions than other samples. Those emissions were particularly high in the case of used filters, and were observed even in the absence of ozone, suggesting that hydrolysis of additives, rather than ozonolysis, is the main formaldehyde source in those filters. Emission rates of formaldehyde and acetaldehyde were not found to be large enough to substantially increase indoor concentrations in typical building scenarios. Nevertheless, ozone reactions on HVAC filters cannot be ignored as a source of low levels of indoor irritants.

Destaillats, Hugo; Chen, Wenhao; Apte, Michael; Li, Nuan; Spears, Michael; Almosni, Jérémie; Brunner, Gregory; Zhang, Jianshun (Jensen); Fisk, William J.

2011-05-01T23:59:59.000Z

429

THE Q/U IMAGING EXPERIMENT INSTRUMENT  

SciTech Connect (OSTI)

The Q/U Imaging ExperimenT (QUIET) is designed to measure polarization in the cosmic microwave background, targeting the imprint of inflationary gravitational waves at large angular scales({approx}1 Degree-Sign ). Between 2008 October and 2010 December, two independent receiver arrays were deployed sequentially on a 1.4 m side-fed Dragonian telescope. The polarimeters that form the focal planes use a compact design based on high electron mobility transistors (HEMTs) that provides simultaneous measurements of the Stokes parameters Q, U, and I in a single module. The 17-element Q-band polarimeter array, with a central frequency of 43.1 GHz, has the best sensitivity (69 {mu}Ks{sup 1/2}) and the lowest instrumental systematic errors ever achieved in this band, contributing to the tensor-to-scalar ratio at r < 0.1. The 84-element W-band polarimeter array has a sensitivity of 87 {mu}Ks{sup 1/2} at a central frequency of 94.5 GHz. It has the lowest systematic errors to date, contributing at r < 0.01. The two arrays together cover multipoles in the range l {approx} 25-975. These are the largest HEMT-based arrays deployed to date. This article describes the design, calibration, performance, and sources of systematic error of the instrument.

Bischoff, C.; Brizius, A.; Buder, I.; Kusaka, A.; Smith, K. M.; Bogdan, M. [Kavli Institute for Cosmological Physics, Department of Physics, Enrico Fermi Institute, The University of Chicago, Chicago, IL 60637 (United States); Chinone, Y. [High Energy Accelerator Research Organization (KEK), 1-1 Oho, Tsukuba, Ibaraki 305-0801 (Japan); Cleary, K.; Reeves, R. [Cahill Center for Astronomy and Astrophysics, California Institute of Technology, 1200 E. California Blvd M/C 249-17, Pasadena, CA 91125 (United States); Dumoulin, R. N.; Newburgh, L. B. [Department of Physics and Columbia Astrophysics Laboratory, Columbia University, New York, NY 10027 (United States); Monsalve, R.; Bustos, R. [Department of Physics, University of Miami, 1320 Campo Sano Drive, Coral Gables, FL 33146 (United States); Naess, S. K. [Institute of Theoretical Astrophysics, University of Oslo, P.O. Box 1029 Blindern, N-0315 Oslo (Norway); Nixon, G. [Joseph Henry Laboratories of Physics, Jadwin Hall, Princeton University, Princeton, NJ 08544 (United States); Vanderlinde, K. [Department of Physics, McGill University, 3600 Rue University, Montreal, Quebec H3A 2T8 (Canada); Wehus, I. K. [Department of Physics, University of Oslo, P.O. Box 1048 Blindern, N-0316 Oslo (Norway); Church, S. E. [Kavli Institute for Particle Astrophysics and Cosmology and Department of Physics, Stanford University, Varian Physics Building, 382 Via Pueblo Mall, Stanford, CA 94305 (United States); Davis, R.; Dickinson, C., E-mail: newburgh@princeton.edu [Jodrell Bank Centre for Astrophysics, Alan Turing Building, School of Physics and Astronomy, University of Manchester, Oxford Road, Manchester M13 9PL (United Kingdom); and others

2013-05-01T23:59:59.000Z

430

Microfabricated instrument for tissue biopsy and analysis  

DOE Patents [OSTI]

A microfabricated biopsy/histology instrument which has several advantages over the conventional procedures, including minimal specimen handling, smooth cutting edges with atomic sharpness capable of slicing very thin specimens (approximately 2 .mu.m or greater), micro-liter volumes of chemicals for treating the specimens, low cost, disposable, fabrication process which renders sterile parts, and ease of use. The cutter is a "cheese-grater" style design comprising a block or substrate of silicon and which uses anisotropic etching of the silicon to form extremely sharp and precise cutting edges. As a specimen is cut, it passes through the silicon cutter and lies flat on a piece of glass which is bonded to the cutter. Microchannels are etched into the glass or silicon substrates for delivering small volumes of chemicals for treating the specimen. After treatment, the specimens can be examined through the glass substrate. For automation purposes, microvalves and micropumps may be incorporated. Also, specimens in parallel may be cut and treated with identical or varied chemicals. The instrument is disposable due to its low cost and thus could replace current expensive microtome and histology equipment.

Krulevitch, Peter A. (Pleasanton, CA); Lee, Abraham P. (Walnut Creek, CA); Northrup, M. Allen (Berkeley, CA); Benett, William J. (Livermore, CA)

1999-01-01T23:59:59.000Z

431

Accommodating subject and instrument variations in spectroscopic determinations  

DOE Patents [OSTI]

A method and apparatus for measuring a biological attribute, such as the concentration of an analyte, particularly a blood analyte in tissue such as glucose. The method utilizes spectrographic techniques in conjunction with an improved instrument-tailored or subject-tailored calibration model. In a calibration phase, calibration model data is modified to reduce or eliminate instrument-specific attributes, resulting in a calibration data set modeling intra-instrument or intra-subject variation. In a prediction phase, the prediction process is tailored for each target instrument separately using a minimal number of spectral measurements from each instrument or subject.

Haas, Michael J. (Albuquerque, NM); Rowe, Robert K. (Corrales, NM); Thomas, Edward V. (Albuquerque, NM)

2006-08-29T23:59:59.000Z

432

INTERIM REPORT ON CONCRETE DEGRADATION MECHANISMS AND ONLINE MONITORING TECHNIQUES  

SciTech Connect (OSTI)

The existing fleets of nuclear power plants in the United States have initial operating licenses of 40 years, though most these plants have applied for and received license extensions. As plant structures, systems, and components age, their useful life—considering both structural integrity and performance—is reduced as a result of deterioration of the materials. The online monitoring of concrete structure conducted under the Advanced Instrumentation, Information, and Control Technologies Pathway of the Light Water Reactor Sustainability program at Idaho National Laboratory will develop and demonstrate concrete structures health monitoring capabilities. Assessment and management of aging concrete structures in nuclear plants require a more systematic approach than simple reliance on existing code margins of safety. Therefore, the structural health monitoring is required to produce actionable information regarding structural integrity that supports operational and maintenance decisions. Through this research project, several national laboratories and Vanderbilt University proposes to develop a framework of research activities for the health monitoring of nuclear power plant concrete structures that includes integration of four elements—damage modeling, monitoring, data analytics, and uncertainty quantification. This report briefly discusses available techniques and ongoing challenges in each of the four elements of the proposed framework with emphasis on degradation mechanisms and online monitoring techniques.

Mahadevan, Sankaran; Agarwal, Vivek; Neal, Kyle; Kosson, David; Adams, Douglas

2014-09-01T23:59:59.000Z

433

Neutral beam monitoring  

DOE Patents [OSTI]

Method and apparatus for monitoring characteristics of a high energy neutral beam. A neutral beam is generated by passing accelerated ions through a walled cell containing a low energy neutral gas, such that charge exchange neutralizes the high energy ion beam. The neutral beam is monitored by detecting the current flowing through the cell wall produced by low energy ions which drift to the wall after the charge exchange. By segmenting the wall into radial and longitudinal segments various beam conditions are further identified.

Fink, Joel H. (Livermore, CA)

1981-08-18T23:59:59.000Z

434

Monitoring Jobs on Edison  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recovery challenge fundProject8Mistakes toMolecularMonitoring Jobs Monitoring

435

Monitoring jobs with qs  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recovery challenge fundProject8Mistakes toMolecularMonitoring JobsMonitoring

436

Monitoring your job  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recovery challenge fundProject8Mistakes toMolecularMonitoring JobsMonitoringJobs

437

CIWS-FW: a Customizable InstrumentWorkstation Software Framework for instrument-independent data handling  

E-Print Network [OSTI]

The CIWS-FW is aimed at providing a common and standard solution for the storage, processing and quick look at the data acquired from scientific instruments for astrophysics. The target system is the instrument workstation either in the context of the Electrical Ground Support Equipment for space-borne experiments, or in the context of the data acquisition system for instrumentation. The CIWS-FW core includes software developed by team members for previous experiments and provides new components and tools that improve the software reusability, configurability and extensibility attributes. The CIWS-FW mainly consists of two packages: the data processing system and the data access system. The former provides the software components and libraries to support the data acquisition, transformation, display and storage in near real time of either a data packet stream and/or a sequence of data files generated by the instrument. The latter is a meta-data and data management system, providing a reusable solution for the...

Conforti, Vito; Bulgarelli, Andrea; Gianotti, Fulvio; Franceschi, Enrico; Nicastro, Luciano; Zoli, Andrea; Dadina, Mauro; Smart, Ricky; Morbidelli, Roberto; Frailis, Marco; Sartor, Stefano; Zacchei, Andrea; Lodi, Marcello; Cirami, Roberto; Pasian, Fabio

2014-01-01T23:59:59.000Z

438

1) Start the Instrument and Software 2 1.1 Start the Instrument 2  

E-Print Network [OSTI]

adhesive film. ColorofLeftLED ColorofRightLED StatusofInstrument Orange *flashing* Orange *flashing on the computer workstation (if it is not already on). 2. Login to Windows. a. User name: operator b. Password: LC Window will appear. Click on New Ex- periment. 2. The software will open the New Experiment Window

Gruner, Daniel S.

439

Online Monitoring to Enable Improved Diagnostics, Prognostics and Maintenance  

SciTech Connect (OSTI)

For both existing and new plant designs there are increasing opportunities and needs for the application of advanced online surveillance, diagnostic and prognostic techniques. These methods can continuously monitor and assess the health of nuclear power plant systems and components. The added effectiveness of such programs has the potential to enable holistic plant management, and minimize exposure to future and unknown risks. The 'NDE & On-line Monitoring' activities within the Advanced Instrumentation, Information and Control Systems (II&CS) Pathway are developing R&D to establish advanced condition monitoring and prognostics technologies to understand and predict future phenomena, derived from plant aging in systems, structures, and components (SSC). This research includes utilization of the enhanced functionality and system condition awareness that becomes available through the application of digital technologies at existing nuclear power plants for online monitoring and prognostics. The current state-of-the-art for on-line monitoring applied to active components (eg pumps, valves, motors) and passive structure (eg core internals, primary piping, pressure vessel, concrete, cables, buried pipes) is being reviewed. This includes looking at the current deployment of systems that monitor reactor noise, acoustic signals and vibration in various forms, leak monitoring, and now increasingly condition-based maintenance (CBM) for active components. The NDE and on-line monitoring projects are designed to look beyond locally monitored CBM. Current trends include centralized plant monitoring of SSC, potential fleet-based CBM and technology that will enable operation and maintenance to be performed with limited on-site staff. Attention is also moving to systems that use online monitoring to permit longer term operation (LTO), including a prognostic or predictive element that estimates a remaining useful life (RUL). Many, if not all, active components (pumps, valves, motors etc.) can be well managed, routinely diagnosed, analyzed and upgraded as needed using a combination of periodic and online CBM. The ability to successfully manage passive systems and structures is seen as the key to LTO, particularly in the USA. New approaches will be demonstrated, including prognostics for passive structures, which is critical to maintaining safety and availability and to reducing operations and maintenance costs for NPP's. To provide proactive on-line monitoring that includes estimates for RUL new projects will include advanced sensors, better understanding of stressors and challenges faced in quantification of uncertainty associated with RUL. This program area will leverage insights from past experience in other industries and seek to demonstrate the feasibility of on-line monitoring and prognostics to support NPP LTO.

Bond, Leonard J.

2011-02-01T23:59:59.000Z

440

The development and deployment of a ground-based, laser-induced fluorescence instrument for the in situ detection of iodine monoxide radicals  

SciTech Connect (OSTI)

High abundances of iodine monoxide (IO) are known to exist and to participate in local photochemistry of the marine boundary layer. Of particular interest are the roles IO plays in the formation of new particles in coastal marine environments and in depletion episodes of ozone and mercury in the Arctic polar spring. This paper describes a ground-based instrument that measures IO at mixing ratios less than one part in 10{sup 12}. The IO radical is measured by detecting laser-induced fluorescence at wavelengths longer that 500 nm. Tunable visible light is used to pump the A{sup 2}?{sub 3/2} (v{sup ?} = 2) ? X{sup 2}?{sub 3/2} (v{sup ?} = 0) transition of IO near 445 nm. The laser light is produced by a solid-state, Nd:YAG-pumped Ti:Sapphire laser at 5 kHz repetition rate. The laser-induced fluorescence instrument performs reliably with very high signal-to-noise ratios (>10) achieved in short integration times (<1 min). The observations from a validation deployment to the Shoals Marine Lab on Appledore Island, ME are presented and are broadly consistent with in situ observations from European Coastal Sites. Mixing ratios ranged from the instrumental detection limit (<1 pptv) to 10 pptv. These data represent the first in situ point measurements of IO in North America.

Thurlow, M. E., E-mail: thurlow@huarp.harvard.edu; Hannun, R. A.; Lapson, L. B.; Anderson, J. G. [Department of Chemistry and Chemical Biology, Harvard University, 12 Oxford Street, Cambridge, Massachusetts 02138 (United States)] [Department of Chemistry and Chemical Biology, Harvard University, 12 Oxford Street, Cambridge, Massachusetts 02138 (United States); Co, D. T. [Department of Chemistry and Chemical Biology, Harvard University, 12 Oxford Street, Cambridge, Massachusetts 02138 (United States) [Department of Chemistry and Chemical Biology, Harvard University, 12 Oxford Street, Cambridge, Massachusetts 02138 (United States); Argonne-Northwestern Solar Energy Research Center and Department of Chemistry, Northwestern University, 2145 Sheridan Road, Evanston, Illinois 60208-3113 (United States); O'Brien, A. S. [Department of Chemistry and Chemical Biology, Harvard University, 12 Oxford Street, Cambridge, Massachusetts 02138 (United States) [Department of Chemistry and Chemical Biology, Harvard University, 12 Oxford Street, Cambridge, Massachusetts 02138 (United States); Department of Civil and Environmental Engineering, Princeton University, Princeton, New Jersey 08544 (United States); Hanisco, T. F. [Department of Chemistry and Chemical Biology, Harvard University, 12 Oxford Street, Cambridge, Massachusetts 02138 (United States) [Department of Chemistry and Chemical Biology, Harvard University, 12 Oxford Street, Cambridge, Massachusetts 02138 (United States); NASA Goddard Space Flight Center, Code 614, Greenbelt, Maryland 20771 (United States)

2014-04-15T23:59:59.000Z

Note: This page contains sample records for the topic "ozone monitoring instrument" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Impact of Smoke Exposure on Digital Instrumentation and Control  

SciTech Connect (OSTI)

Smoke can cause interruptions and upsets in active electronics. Because nuclear power plants are replacing analog with digital instrumentation and control systems, qualification guidelines for new systems are being reviewed for severe environments such as smoke and electromagnetic interference. Active digital systems, individual components, and active circuits have been exposed to smoke in a program sponsored by the U.S. Nuclear Regulatory Commission. The circuits and systems were all monitored during the smoke exposure, indicating any immediate effects of the smoke. The results of previous smoke exposure studies have been reported in various publications. The major immediate effect of smoke has been to increase leakage currents and to cause momentary upsets and failures in digital systems. This paper presents new results from conformal coatings, memory chips, and hard drive tests.The best conformal coatings were found to be polyurethane, parylene, and acrylic (when applied by dipping). Conformal coatings can reduce smoke-induced leakage currents and protect against metal loss through corrosion. However conformal coatings are typically flammable, so they do increase material flammability. Some of the low-voltage biased memory chips failed during a combination of high smoke and high humidity. Typically, smoke along with heat and humidity is expected during fire, rather than smoke alone. Thus, due to high sensitivity of digital circuits to heat and humidity, it is hypothesized that the impact of smoke may be secondary.Low-voltage (3.3-V) static random-access memory (SRAMs) were found to be the most vulnerable to smoke. Higher bias voltages decrease the likelihood of failure. Erasable programmable read-only memory (EPROMs) and nonvolatile SRAMs were very smoke tolerant. Failures of the SRAMs occurred when two conditions were present: high density of smoke and high humidity. As the high humidity was present for only part of the test, the failures were intermittent. All of the chips that failed during the test recovered after enough venting.Hard disks were tested in severe environments but did not fail during the 2 h of monitoring.While the results of the tests documented in this report confirm that digital circuits can indeed be vulnerable to smoke, there is currently no practical, repeatable testing methodology, so it is not feasible to assess smoke susceptibility as part of environmental qualification. As a result, the most reasonable approach to minimizing smoke susceptibility is to employ design, implementation, and procedural practices that can reduce the possibility of smoke exposure and enhance smoke tolerance. Traditional approaches to mitigate its effects in digital safety instrumentation and control, such as redundancy, separation, defense in depth, as well as adherence to standards (e.g., the Institute of Electrical and Electronics Engineers' IEEE 384) and the Code of Federal Regulations Appendix R of 10 CFR 50, should continue to be applied.

Tanaka, Tina J. [Sandia National Laboratories (United States); Nowlen, Steven P. [Sandia National Laboratories (United States); Korsah, Kofi [Oak Ridge National Laboratory (United States); Wood, Richard T. [Oak Ridge National Laboratory (United States); Antonescu, Christina E. [U.S. Nuclear Regulatory Commission (United States)

2003-08-15T23:59:59.000Z

442

Luminosity monitor at PEP  

SciTech Connect (OSTI)

The luminosity monitor system utilized by the MKII Detector and by the PEP operators is described. This system processes information from 56 photomultipliers and calculates independent luminosities for each of the 3 colliding bunches in PEP. Design considerations, measurement techniques, and sources of error in the luminosity measurement are discussed.

Fox, J.D.; Franklin, M.E.B.

1981-02-01T23:59:59.000Z

443

Monitoring informs management  

SciTech Connect (OSTI)

Improved regional monitoring and reporting of greenhouse-gas emissions depends on accurate estimates of emissions from different land-use regimes. An analysis suggests that measuring emissions per crop yield may be an optimum metric for refining land-management decisions.

West, Tristram O.

2011-10-24T23:59:59.000Z

444

Rack protection monitor  

DOE Patents [OSTI]

A hardwired, fail-safe rack protection monitor utilizes electromechanical relays to respond to the detection by condition sensors of abnormal or alarm conditions (such as smoke, temperature, wind or water) that might adversely affect or damage equipment being protected. When the monitor is reset, the monitor is in a detection mode with first and second alarm relay coils energized. If one of the condition sensors detects an abnormal condition, the first alarm relay coil will be de-energized, but the second alarm relay coil will remain energized. This results in both a visual and an audible alarm being activated. If a second alarm condition is detected by another one of the condition sensors while the first condition sensor is still detecting the first alarm condition, both the first alarm relay coil and the second alarm relay coil will be de-energized. With both the first and second alarm relay coils de-energized, both a visual and an audible alarm will be activated. In addition, power to the protected equipment will be terminated and an alarm signal will be transmitted to an alarm central control. The monitor can be housed in a separate enclosure so as to provide an interface between a power supply for the protected equipment and the protected equipment.

Orr, Stanley G. (Wheaton, IL)

2000-01-01T23:59:59.000Z

445

A network security monitor  

SciTech Connect (OSTI)

The study of security in computer networks is a rapidly growing area of interest because of the proliferation of networks and the paucity of security measures in most current networks. Since most networks consist of a collection of inter-connected local area networks (LANs), this paper concentrates on the security-related issues in a single broadcast LAN such as Ethernet. Specifically, we formalize various possible network attacks and outline methods of detecting them. Our basic strategy is to develop profiles of usage of network resources and then compare current usage patterns with the historical profile to determine possible security violations. Thus, our work is similar to the host-based intrusion-detection systems such as SRI's IDES. Different from such systems, however, is our use of a hierarchical model to refine the focus of the intrusion-detection mechanism. We also report on the development of our experimental LAN monitor currently under implementation. Several network attacks have been simulated and results on how the monitor has been able to detect these attacks are also analyzed. Initial results demonstrate that many network attacks are detectable with our monitor, although it can surely be defeated. Current work is focusing on the integration of network monitoring with host-based techniques. 20 refs., 2 figs.

Heberlein, L.T.; Dias, G.V.; Levitt, K.N.; Mukherjee, B.; Wood, J.; Wolber, D. (California Univ., Davis, CA (USA). Dept. of Electrical Engineering and Computer Science)

1989-11-01T23:59:59.000Z

446

A bipolar integrator for secondary emission profile monitors at the SSCL  

SciTech Connect (OSTI)

Many invasive techniques for monitoring beam profile and intensity require secondary emission signals in order to make the measurement. Signal acquisition and processing can take many forms. This paper describes a bipolar integration technique which uses the Burr-Brown ACF2101 Dual Switched Integrator chip and applications for accelerator beam instrumentation.

Datte, P.; Beechy, D.; Webber, R.

1994-01-01T23:59:59.000Z

447

IEEE SENSORS JOURNAL, VOL. 4, NO. 4, AUGUST 2004 395 Sensor Technologies for Monitoring Metabolic  

E-Print Network [OSTI]

IEEE SENSORS JOURNAL, VOL. 4, NO. 4, AUGUST 2004 395 Sensor Technologies for Monitoring Metabolic Michelle Wilson, Member, IEEE Abstract--A review of optical, chemical, and biological sensors to detect-on-a-chip research instrumentation. The sensors reviewed include optical sensors, at both research and commercial

Wilson, Denise

448

Intelligent monitoring system for long-term control of Sequencing Batch Reactors  

E-Print Network [OSTI]

Instruments Italy to test the potentials of monitoring systems applied to biological wastewater treatment Sequencing Batch Reactors (SBRs) are widely used as a flexible and low-cost process for biological wastewater-scale Sequencing Batch Reactor (SBR) treating nitrogen-rich wastewater (sanitary landfill leachate). The paper

449

SRS delayed neutron instruments for safeguards measurements  

SciTech Connect (OSTI)

Six analytical systems measuring delayed neutrons have been used for safeguards measurements at the Savannah River Site (SRS). A predecessor, the 252Cf Activation Analysis Facility installed at the Savannah River Technology Center (formally SR Laboratory) has been used since 1974 to analyze small samples, measuring both delayed neutrons and gammas. The six shufflers, plus one currently being fabricated, were developed, designed and fabricated by the LANL N-1 group. These shufflers have provided safeguards measurements of product (2 each), in-process scrap (2 each plus a conceptual replacement) and process waste (2 each plus one being fabricated). One shuffler for scrap assay was the first shuffler to be installed (1978) in a process. Another (waste) was the first installed in a process capable of assaying barrels. A third (waste) is the first pass-through model and a fourth (product) is the most precise ({+-}.12%) and accurate NDA instrument yet produced.

Studley, R.V. [Westinghouse SRC, Aiken, SC (United States)

1993-12-31T23:59:59.000Z

450

Microfabricated instrument for tissue biopsy and analysis  

DOE Patents [OSTI]

A microfabricated biopsy/histology instrument which has several advantages over the conventional procedures, including minimal specimen handling, smooth cutting edges with atomic sharpness capable of slicing very thin specimens (approximately 2 .mu.m or greater), micro-liter volumes of chemicals for treating the specimens, low cost, disposable, fabrication process which renders sterile parts, and ease of use. The cutter is a "cheese-grater" style design comprising a block or substrate of silicon and which uses anisotropic etching of the silicon to form extremely sharp and precise cutting edges. As a specimen is cut, it passes through the silicon cutter and lies flat on a piece of glass which is bonded to the cutter. Microchannels are etched into the glass or silicon substrates for delivering small volumes of chemicals for treating the specimen. After treatment, the specimens can be examined through the glass substrate.

Krulevitch, Peter A. (Pleasanton, CA); Lee, Abraham P. (Walnut Creek, CA); Northrup, M. Allen (Berkeley, CA); Benett, William J. (Livermore, CA)

2001-01-01T23:59:59.000Z

451

Highly damped kinematic coupling for precision instruments  

DOE Patents [OSTI]

A highly damped kinematic coupling for precision instruments. The kinematic coupling provides support while causing essentially no influence to its nature shape, with such influences coming, for example, from manufacturing tolerances, temperature changes, or ground motion. The coupling uses three ball-cone constraints, each combined with a released flexural degree of freedom. This arrangement enables a gain of higher load capacity and stiffness, but can also significantly reduce the friction level in proportion to the ball radius divided by the distance between the ball and the hinge axis. The blade flexures reduces somewhat the stiffness of the coupling and provides an ideal location to apply constrained-layer damping which is accomplished by attaching a viscoelastic layer and a constraining layer on opposite sides of each of the blade flexures. The three identical ball-cone flexures provide a damped coupling mechanism to kinematically support the projection optics system of the extreme ultraviolet lithography (EUVL) system, or other load-sensitive apparatus.

Hale, Layton C. (Livermore, CA); Jensen, Steven A. (Livermore, CA)

2001-01-01T23:59:59.000Z

452

SUNRISE: INSTRUMENT, MISSION, DATA, AND FIRST RESULTS  

SciTech Connect (OSTI)

The SUNRISE balloon-borne solar observatory consists of a 1 m aperture Gregory telescope, a UV filter imager, an imaging vector polarimeter, an image stabilization system, and further infrastructure. The first science flight of SUNRISE yielded high-quality data that revealed the structure, dynamics, and evolution of solar convection, oscillations, and magnetic fields at a resolution of around 100 km in the quiet Sun. After a brief description of instruments and data, the first qualitative results are presented. In contrast to earlier observations, we clearly see granulation at 214 nm. Images in Ca II H display narrow, short-lived dark intergranular lanes between the bright edges of granules. The very small-scale, mixed-polarity internetwork fields are found to be highly dynamic. A significant increase in detectable magnetic flux is found after phase-diversity-related reconstruction of polarization maps, indicating that the polarities are mixed right down to the spatial resolution limit and probably beyond.

Solanki, S. K.; Barthol, P.; Danilovic, S.; Feller, A.; Gandorfer, A.; Hirzberger, J.; Riethmueller, T. L.; Schuessler, M. [Max-Planck-Institut fuer Sonnensystemforschung, Max-Planck-Str. 2, 37191 Katlenburg-Lindau (Germany); Bonet, J. A.; Pillet, V. MartInez [Instituto de Astrofisica de Canarias, C/Via Lactea s/n, 38200 La Laguna, Tenerife (Spain); Del Toro Iniesta, J. C. [Instituto de Astrofisica de AndalucIa (CSIC), Apdo. de Correos 3004, E-18080, Granada (Spain); Domingo, V.; Palacios, J. [Grupo de AstronomIa y Ciencias del Espacio, Universidad de Valencia, E-46980, Paterna, Valencia (Spain); Knoelker, M. [High Altitude Observatory, National Center for Atmospheric Research, P.O. Box 3000, Boulder, CO 80307-3000 (United States); Gonzalez, N. Bello; Berkefeld, T.; Franz, M.; Schmidt, W. [Kiepenheuer-Institut fuer Sonnenphysik, Schoeneckstr. 6, 79104 Freiburg (Germany); Title, A. M., E-mail: solanki@mps.mpg.d [Lockheed-Martin Solar and Astrophysical Lab., Palo Alto, CA 94304 (United States)

2010-11-10T23:59:59.000Z

453

All Sky Camera, LIDAR and Electric Field Meter: auxiliary instruments for the ASTRI SST-2M prototype  

E-Print Network [OSTI]

ASTRI SST-2M is the end-to-end prototype telescope of the Italian National Institute of Astro- physics, INAF, designed to investigate the 10-100 TeV band in the framework of the Cherenkov Telescope Array, CTA. The ASTRI SST-2M telescope has been installed in Italy in September 2014, at the INAF ob- serving station located at Serra La Nave on Mount Etna. The telescope is foreseen to be completed and fully operative in spring 2015 including auxiliary instrumentation needed to support both operations and data anal- ysis. In this contribution we present the current status of a sub-set of the auxiliary instruments that are being used at the Serra La Nave site, namely an All Sky Camera, an Electric Field Meter and a Raman Lidar devoted, together with further instrumentation, to the monitoring of the atmospheric and environmental conditions. The data analysis techniques under development for these instruments could be applied at the CTA sites, where similar auxiliary instrumentation will be installed.

Leto, Giuseppe; Bellassai, Giancarlo; Bruno, Pietro; Maccarone, Maria Concetta; Martinetti, Eugenio

2015-01-01T23:59:59.000Z

454

PVUSA instrumentation and data analysis techniques for photovoltaic systems  

SciTech Connect (OSTI)

The Photovoltaics for Utility Scale Applications (PVUSA) project tests two types of PV systems at the main test site in Davis, California: new module technologies fielded as 20-kW Emerging Module Technology (EMT) arrays and more mature technologies fielded as 70- to 500-kW turnkey Utility-Scale (US) systems. PVUSA members have also installed systems in their service areas. Designed appropriately, data acquisition systems (DASs) can be a convenient and reliable means of assessing system performance, value, and health. Improperly designed, they can be complicated, difficult to use and maintain, and provide data of questionable validity. This report documents PVUSA PV system instrumentation and data analysis techniques and lessons learned. The report is intended to assist utility engineers, PV system designers, and project managers in establishing an objective, then, through a logical series of topics, facilitate selection and design of a DAS to meet the objective. Report sections include Performance Reporting Objectives (including operational versus research DAS), Recommended Measurements, Measurement Techniques, Calibration Issues, and Data Processing and Analysis Techniques. Conclusions and recommendations based on the several years of operation and performance monitoring are offered. This report is one in a series of 1994--1995 PVUSA reports documenting PVUSA lessons learned at the demonstration sites in Davis and Kerman, California. Other topical reports address: five-year assessment of EMTs; validation of the Kerman 500-kW grid support PV plant benefits; construction and safety experience in installing and operating PV systems; balance-of-system design and costs; procurement, acceptance, and rating practices for PV power plants; experience with power conditioning units and power quality.

Newmiller, J.; Hutchinson, P.; Townsend, T.; Whitaker, C.

1995-10-01T23:59:59.000Z

455

Study of air pollution: Effects of ozone on neuropeptide-mediated responses in human subjects. Final report  

SciTech Connect (OSTI)

The study examined the hypothesis that ozone inactivates the enzyme, neutral endopeptidase, responsible for limiting the effects of neuropeptides released from afferent nerve endings. Cough response of capsaicin solution delivered from a nebulizer at 2 min. intervals until two or more coughs were produced. Other endpoints measured included irritative symptoms as rated by the subjects on a nonparametric scale, spirometry, of each concentration of ozone were compared to those of filtered air in a single-blind randomized sequence. The results indicate that a 2 h. exposure to 0.4 ppm of ozone with intermittent light exercise alters the sensitivity of airway nerves that mediate the cough response to inhaled materials. This dose of ozone also caused a change in FEV1. A lower level of ozone, 0.02 ppm, caused a change in neither cough threshold nor FEV1, even when the duration of exposure was extended to three hours. The findings are consistent with the author's hypothesis that ozone may sensitize nerve endings in the airways by inactivating neutral endopeptidase, an enzyme that regulates their activity, but they do not demonstrate that directly examining an effect directly mediated by airway nerves allows detection of effects of ozone at doses below those causing effects detected by standard tests of pulmonary function.

Boushey, H.A.

1991-11-01T23:59:59.000Z

456

Indoor Secondary Pollutants from Household Product Emissions inthe Presence of Ozone: A Bench-Scale Chamber Study  

SciTech Connect (OSTI)

Ozone-driven chemistry is a major source of indoor secondary pollutants of health concern. This study investigates secondary air pollutants formed from reactions between constituents of household products and ozone. Gas-phase product emissions were introduced along with ozone at constant rates into a 198-L Teflon-lined reaction chamber. Gas-phase concentrations of reactive terpenoids and oxidation products were measured. Formaldehyde was a predominant oxidation byproduct for the three studied products, with yields under most conditions of 20-30% with respect to ozone consumed. Acetaldehyde, acetone, glycolaldehyde, formic acid and acetic acid were each also detected for two or three of the products. Immediately upon mixing of reactants, a scanning mobility particle sizer detected particle nucleation events that were followed by a significant degree of ultrafine particle growth. The production of secondary gaseous pollutants and particles depended primarily on the ozone level and was influenced by other parameters such as the air-exchange rate. Hydroxyl radical concentrations in the range 0.04-200 x 10{sup 5} molecules cm{sup -3} were measured. OH concentrations were observed to vary strongly with residual ozone level in the chamber, which was in the range 1-25 ppb, as is consistent with expectations from a simplified kinetic model. In a separate test, we exposed the dry residue of two products to ozone in the chamber and observed the formation of gas-phase and particle-phase secondary oxidation products.

Destaillats, Hugo; Lunden, Melissa M.; Singer, Brett C.; Coleman,Beverly K.; Hodgson, Alfred T.; Weschler, Charles J.; Nazaroff, William W.

2005-10-01T23:59:59.000Z

457

Kudzu (Pueraria montana) invasion doubles emissions of nitric oxide and increases ozone pollution  

E-Print Network [OSTI]

Kudzu (Pueraria montana) invasion doubles emissions of nitric oxide and increases ozone pollution) The nitrogen-fixing legume kudzu (Pueraria montana) is a wide- spread invasive plant in the southeastern United the effects of kudzu invasions on soils and trace N gas emissions at three sites in Madison County, Georgia

Mickley, Loretta J.

458

Effects of Ion-Exchange Treatment on Bromate Formation and Oxidation Efficiency during Ozonation  

E-Print Network [OSTI]

water treatment. In this study, we applied several different ion exchangers (i.e., anion exchange resins technologies in advanced drinking water treatment processes along with activated carbon treatment. Ozonation), chlorine-resistant pathogenic organisms, and various micropollutants in drinking water treatment. In Japan

Takada, Shoji

459

Three-dimensional modeling of ozone on Mars Franck Lefe`vre,1  

E-Print Network [OSTI]

picture of a global anticorrelation between the ozone (O3) and water vapor columns. However and Structure: Middle atmosphere--constituent transport and chemistry (3334); 5405 Planetology: Solid Surface Planets: Atmospheres--composition and chemistry; 6225 Planetology: Solar System Objects: Mars; KEYWORDS

Forget, François

460

The impact of large scale biomass production on ozone air pollution in Joost B. Beltman a  

E-Print Network [OSTI]

The impact of large scale biomass production on ozone air pollution in Europe Joost B. Beltman a , Carlijn Hendriks a , Markus Tum b , Martijn Schaap a,* a TNO, Department of Climate, Air by up to 25% and 40%. Air pollution mitigation strategies should consider land use management. a r t i

Utrecht, Universiteit

Note: This page contains sample records for the topic "ozone monitoring instrument" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Synthesis of nickel–zinc ferrite magnetic nanoparticle and dye degradation using photocatalytic ozonation  

SciTech Connect (OSTI)

Graphical abstract: Display Omitted Highlights: ? Nickel–zinc ferrite magnetic nanoparticle (NZFMN) was synthesized and characterized. ? Dye degradation by photocatalytic ozonation using NZFMN was studied. ? Formate, acetate and oxalate were detected as dominant dye degradation aliphatic intermediates. ? Nitrate, sulfate and chloride ions were detected as mineralization products of dyes. ? NZFMN was an effective magnetic nanocatalyst to degrade dyes. -- Abstract: In this paper, nickel–zinc ferrite magnetic nanoparticle (NZFMN) was synthesized and its dye degradation ability using photocatalytic ozonation was investigated. The NZFMN was characterized by X-ray diffraction (XRD), scanning electron microscopic (SEM), Fourier transforms infrared (FTIR) and alternative gradient force magnetometer (AGFM). Reactive Red 198 (RR198) and Direct Green 6 (DG6) were used as dye models. UV–vis and ion chromatography (IC) analyses were employed to study dye degradation. The effects of operational parameters on decolorization such as NZFMN dosage, dye concentration, salt and pH were studied. RR198 and DG6 were completely decolorized (100%) by photocatalytic ozonation using NZFMN. Formate, acetate and oxalate anions were detected as dominant aliphatic intermediates. Nitrate, sulfate and chloride ions were detected as mineralization products of dyes. Results showed that the photocatalytic ozonation using NZFMN was a very effective method for dye degradation.

Mahmoodi, Niyaz Mohammad, E-mail: mahmoodi@icrc.ac.ir [Department of Environmental Research, Institute for Color Science and Technology, Tehran (Iran, Islamic Republic of); Bashiri, Marziyeh; Moeen, Shirin Jebeli [Department of Environmental Research, Institute for Color Science and Technology, Tehran (Iran, Islamic Republic of)] [Department of Environmental Research, Institute for Color Science and Technology, Tehran (Iran, Islamic Republic of)

2012-12-15T23:59:59.000Z

462

Supporting Information for Impact of Chlorine Emissions from Sea-Salt Aerosol on Coastal Urban Ozone  

E-Print Network [OSTI]

DIOXIDE H2O2 HYDROGEN PEROXIDE NH3 AMMONIA NIT AEROSOL NITRATE SO2 SULFUR DIOXIDE SO3 SULFUR TRIOXIDE OSD extensions* NO NITRIC OXIDE NO2 NITROGEN DIOXIDE O3 OZONE HONO NITROUS ACID HNO3 NITRIC ACID HNO4 PERNITRIC ACID N2O5 NITROGEN PENTOXIDE NO3 NITRATE RADICAL HO2 HYDROPEROXY RADICAL CO CARBON MONOXIDE CO2 CARBON

Dabdub, Donald

463

Growth and crown architecture of two aspen genotypes exposed to interacting ozone and carbon dioxide  

E-Print Network [OSTI]

Growth and crown architecture of two aspen genotypes exposed to interacting ozone and carbon to O3, atmos- pheric carbon dioxide (CO2) concentrations are increasing rapidly (Keeling et al., 1995 concentrations may offset the detrimental effects of increasing O3 (Allen, 1990). Some studies have shown that CO

464

A Laboratory Method For Measuring The Ozone Emission From In-duct Air Cleaners.  

E-Print Network [OSTI]

: Emission rate, HVAC air cleaners, electrostatic precipitators, coronas, standard test method 1 Introduction Subchapter 8.7). However, in-duct air cleaners including electronic air cleaners, electrostatic precipitators of an ozone analyzer. Viner et al. (1992) studied commercial in-duct electrostatic precipitators and observed

Siegel, Jeffrey

465

Earth'sFuture Stratospheric ozone response to a solar irradiance reduction  

E-Print Network [OSTI]

the stratospheric ozone response to a proposed geoengineering activity wherein a reduced top-of-atmosphere (TOA to the Geoengineering Model Intercomparison Project (GeoMIP) Experiment G1. Three primary simulations were completed geoengineering activities have been proposed as possible techniques to help counteract the ongoing climate change

Jackman, Charles H.

466

Stratospheric ozone response to sulfate geoengineering: Results from the Geoengineering Model  

E-Print Network [OSTI]

Stratospheric ozone response to sulfate geoengineering: Results from the Geoengineering Model for Atmospheric Research, Boulder, Colorado, USA Abstract Geoengineering with stratospheric sulfate aerosols has the experiments G3 and G4 of the Geoengineering Model Intercomparison Project. On average, the models simulate

Robock, Alan

467

Probing into regional ozone and particulate matter pollution in the United States  

E-Print Network [OSTI]

) and fine particulate matter (PM2.5) air pollution and associated health effects have been one of the majorProbing into regional ozone and particulate matter pollution in the United States: 1. A 1 year CMAQ-term simulations using the Community Multiscale Air Quality (CMAQ) modeling system and subsequent process analyses

Jacobson, Mark

468

Ozone depletion during the solar proton events of October//November 2003 as seen by SCIAMACHY  

E-Print Network [OSTI]

Ozone depletion during the solar proton events of October//November 2003 as seen by SCIAMACHY G changes caused by the solar proton events from 26 October to 6 November 2003, known as the ``Halloween differences are given. Two regimes can be distinguished, one above about 50 km dominated by HOx (H, OH, HO2

Steinhoff, Heinz-JĂĽrgen

469

PublishedbyManeyPublishing(c)IOMCommunicationsLtd Influence of UV irradiation and ozone on  

E-Print Network [OSTI]

of purified humid air containing predetermined quantities of SO2, NO2, H2S, Cl2, HCI, NH3 and O3. This lackPublishedbyManeyPublishing(c)IOMCommunicationsLtd Influence of UV irradiation and ozone by ultraviolet (UV) light was investigated. A modified coulometric reduction technique was used, substituting

470

Earth'sFuture Multidecadal global cooling and unprecedented ozone loss  

E-Print Network [OSTI]

Earth'sFuture Multidecadal global cooling and unprecedented ozone loss following a regional nuclear inertia and albedo effects in the ocean and expanded sea ice. The combined cooling and enhanced UV would put significant pressures on global food supplies and could trigger a global nuclear famine. Knowledge

Robock, Alan

471

Interactions of ozone and pathogens on the surface structure of Norway spruce needles  

E-Print Network [OSTI]

Interactions of ozone and pathogens on the surface structure of Norway spruce needles K. Ojanperä S and pathogens. It also acts as a barrier to air pollutants (Jeffree, 1986). The epicuticular wax of Norway and then a plate-like wax structure (Sauter and Voss, 1986). The life span of healthy needles of Norway spruce

Paris-Sud XI, Université de

472

White Pine Emission Trends of Monoterpenes and Sesquiterpenes After Acute Ozone Exposure  

E-Print Network [OSTI]

White Pine Emission Trends of Monoterpenes and Sesquiterpenes After Acute Ozone Exposure Daniel M of White Pine (Pinus strobus) specimens located at the University of Michigan Biological Station (UMBS). To measure terpene production, dynamic branch enclosures were simultaneously positioned on White Pine

Collins, Gary S.

473

Thickness influence on surface morphology and ozone sensing properties of nanostructured ZnO transparent  

E-Print Network [OSTI]

, 71004 Heraklion, Crete, Greece Available online 19 January 2006 Abstract Transparent zinc oxide (Zn Keywords: Zinc oxide; PLD; AFM; Ozone 1. Introduction Zinc oxide (ZnO) is an n-type semiconductor devices [3], varistors, planar optical waveguides [4], transparent electrodes [5,6], ultraviolet

474

A neural emission-receptor model for ozone reduction S.Barazzetta, G. Corani  

E-Print Network [OSTI]

in air pollution studies because of their impact on human health and agricultural crops and forests. High,guariso@elet.polimi.it Abstract: Ground level ozone pollution is a complex phenomenon heavily affecting industrialized and pop problem that determines the least cost alternatives to obtain a given air quality standard. The decision

Corani, Giorgio

475

Author's personal copy Digestive utilization of ozone-exposed forage by rabbits (Oryctolagus cuniculus)  

E-Print Network [OSTI]

Author's personal copy Digestive utilization of ozone-exposed forage by rabbits (Oryctolagus Digestibility Forage quality Herbivore nutrition Phenolics Rabbits Southern Piedmont a b s t r a c t A mixture) in a digestibility experiment. Forages and feed refusals were analyzed for concentrations of total cell wall

Ditchkoff, Steve

476

The Economic Impact of Global Climate and Tropospheric Ozone on World Agricultural Production  

E-Print Network [OSTI]

by Xiaodu (Dulles) Wang Bachelor of Science with majors in Electrical Engineering, Economics and ComputerThe Economic Impact of Global Climate and Tropospheric Ozone on World Agricultural Production Engineering The Johns Hopkins University, June 2003 Submitted to the Engineering Systems Division

477

Ground-level ozone in the 21st century: future trends,  

E-Print Network [OSTI]

Ground-level ozone in the 21st century: future trends, impacts and policy implications October 2008 Price ÂŁ39 web royalsociety.org Science Policy REPORT 15/08 #12;Cover image: Sunrise over the River Ganges in Varanasi, India showing a sunny and polluted sky, characteristic of photochemical smog

478

Transport of Asian ozone pollution into surface air over the western United States in spring  

E-Print Network [OSTI]

Transport of Asian ozone pollution into surface air over the western United States in spring Meiyun the mechanisms involved in the transport of Asian pollution plumes into western U.S. surface air through, including the interleaving and mixing of Asian pollution and stratospheric air associated with complex

479

Wireless device monitoring systems and monitoring devices, and associated methods  

DOE Patents [OSTI]

Wireless device monitoring systems and monitoring devices include a communications module for receiving wireless communications of a wireless device. Processing circuitry is coupled with the communications module and configured to process the wireless communications to determine whether the wireless device is authorized or unauthorized to be present at the monitored area based on identification information of the wireless device. Methods of monitoring for the presence and identity of wireless devices are also provided.

McCown, Steven H; Derr, Kurt W; Rohde, Kenneth W

2014-05-27T23:59:59.000Z

480

Rulison Monitoring Plan  

SciTech Connect (OSTI)

The Project Rulison Monitoring Plan has been developed as part of the U.S. Department of Energy (DOE) Office of Legacy Management's mission to protect human health and the environment. The purpose of the plan is to monitor fluids from gas wells for radionuclides that would indicate contamination is migrating from the Rulison detonation zone to producing gas wells, allowing action to be taken before the contamination could pose a risk. The Monitoring Plan (1) lists the contaminants present and identifies those that have the greatest potential to migrate from the detonation zone (radionuclide source term), (2) identifies locations that monitor the most likely transport pathways, (3) identifies which fluids will be sampled (gas and liquid) and why, (4) establishes the frequency of sampling, and (5) specifies the most practical analyses and where the analysis results will be reported. The plan does not affect the long-term hydrologic sampling conducted by DOE since 1972, which will continue for the purpose of sampling shallow groundwater and surface water near the site. The Monitoring Plan was developed in anticipation of gas wells being drilled progressively nearer the Rulison site. DOE sampled 10 gas wells in 1997 and 2005 at distances ranging from 2.7 to 7.6 miles from the site to establish background concentrations for radionuclides. In a separate effort, gas industry operators and the Colorado Oil and Gas Conservation Commission (COGCC) developed an industry sampling and analysis plan that was implemented in 2007. The industry plan requires the sampling of gas wells within 3 miles of the site, with increased requirements for wells within 1 mile of the site. The DOE plan emphasizes the sampling of wells near the site (Figure 1), specifically those with a bottom-hole location of 1 mile or less from the detonation, depending on the direction relative to the natural fracture trend of the producing formation. Studies indicate that even the most mobile radionuclides created by the test are unlikely to migrate appreciable distances (hundreds of feet) from the detonation zone (Cooper et al. 2007, 2009). The Monitoring Plan was developed to provide a cautious and comprehensive approach for detecting any potential contaminant migration from the Rulison test site. It also provides an independent confirmation of results from the industry sampling and analysis plan while effectively increasing the sampling frequency of wells near the site.

None

2010-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "ozone monitoring instrument" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Failure of ozone and nitrogen dioxide to enhance lung tumor development in hamsters  

SciTech Connect (OSTI)

We tested the hypothesis that the two common oxidant air pollutants, ozone and nitrogen dioxide, modulate the development of respiratory tract tumors in Syrian golden hamsters. The animals received subcutaneous injections of the carcinogen diethylnitrosamine (20 mg/kg) twice a week while being exposed continuously to an atmosphere of 0.8 parts per million (ppm)* of ozone or 15 ppm of nitrogen dioxide. Animals were killed 16 weeks or 24 to 32 weeks after the beginning of the treatment. Ozone delayed the appearance of tracheal tumors and reduced the incidence of tumors in the lung periphery. A suspected neuroendocrine differentiation of those lung tumors could not be established by immunocytochemistry due to overfixation of tissues. On the other hand, ozone seemed to mitigate development of hepatotoxic lesions mediated by diethylnitrosamine. In animals treated with diethylnitrosamine and exposed to nitrogen dioxide, fewer tracheal tumors and no lung tumors were found. Only a few lung tumors were produced in animals treated with diethylnitrosamine and kept in an atmosphere of 65% oxygen. The previously observed neuroendocrine nature of tumors induced by simultaneous exposure to diethylnitrosamine and hyperoxia could not be established because the long fixation of tissues precluded immunocytochemical stains. Animals treated with diethylnitrosamine and kept in filtered air while being housed in wire-mesh cages developed fewer lung tumors than animals given the same treatment and kept on conventional bedding in shoebox cages. Although all inhalants tested are known to produce substantial cell proliferation in the respiratory tract, it was not possible to document whether this would enhance lung tumor development. The role of the two common air pollutants, ozone and nitrogen dioxide, as possible additional risks in the pathogenesis of lung cancer in animals continues to remain uncertain.

Witschi, H.; Breider, M.A.; Schuller, H.M. (Univ. of California, Davis, CA (United States))

1993-09-01T23:59:59.000Z

482

Online circuit breaker monitoring system  

E-Print Network [OSTI]

inspection and maintenance of the circuit breakers. An automated online circuit breaker monitoring system is proposed to monitor condition, operation and status of high and medium voltage circuit breakers. By tracking equipment condition, this system could...

Djekic, Zarko

2008-10-10T23:59:59.000Z

483

Online circuit breaker monitoring system  

E-Print Network [OSTI]

inspection and maintenance of the circuit breakers. An automated online circuit breaker monitoring system is proposed to monitor condition, operation and status of high and medium voltage circuit breakers. By tracking equipment condition, this system could...

Djekic, Zarko

2009-05-15T23:59:59.000Z

484

Monitoring and Managing PDSF Jobs  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Monitoring and Managing Jobs Monitoring and Managing Jobs Commonly Used Commands Action How to do it Comment Get a summary of all batch jobs sgeusers Shows a tally of all jobs for...

485

Condition Monitoring System for Reinforced  

E-Print Network [OSTI]

containing dissolved ionic species such as chlorides. Since concrete is a porous material, with timeCondition Monitoring System for Reinforced Concrete Structures PROBLEM THIS TECHNOLOGY SOLVES: Patent pending concrete condition monitoring system providing `real-time' information on temperature

Painter, Kevin

486

DOE Fundamentals Handbook: Instrumentation and Control, Volume 2  

SciTech Connect (OSTI)

The Instrumentation and Control Fundamentals Handbook personnel, and the technical staff facility operating contractors provide operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of instrumentation and control systems. The handbook includes information on temperature, pressure, flow, and level detection systems; position indication systems; process control systems; and radiation detection principles. This information will provide personnel with an understanding of the basic operation of various types of DOE nuclear facility instrumentation and control systems.

Not Available

1992-06-01T23:59:59.000Z

487

DOE Fundamentals Handbook: Instrumentation and Control, Volume 1  

SciTech Connect (OSTI)

The Instrumentation and Control Fundamentals Handbook was developed to assist nuclear facility operating contractors provide operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of instrumentation and control systems. The handbook includes information on temperature, pressure, flow, and level detection systems; position indication systems; process control systems; and radiation detection principles. This information will provide personnel with an understanding of the basic operation of various types of DOE nuclear facility instrumentation and control systems.

Not Available

1992-06-01T23:59:59.000Z

488

Corrosion Monitoring System  

SciTech Connect (OSTI)

The Corrosion Monitoring System (CMS) program developed and demonstrated a continuously on-line system that provides real-time corrosion information. The program focused on detecting pitting corrosion in its early stages. A new invention called the Intelligent Ultrasonic Probe (IUP) was patented on the program. The IUP uses ultrasonic guided waves to detect small defects and a Synthetic Aperture Focusing Technique (SAFT) algorithm to provide an image of the pits. Testing of the CMS demonstrated the capability to detect pits with dimensionality in the sub-millimeter range. The CMS was tested in both the laboratory and in a pulp and paper industrial plant. The system is capable of monitoring the plant from a remote location using the internet.

Dr. Russ Braunling

2004-10-31T23:59:59.000Z

489

Cycle isolation monitoring  

SciTech Connect (OSTI)

There are many factors to monitor in power plants, but one that is frequently overlooked is cycle isolation. Often this is an area where plant personnel can find 'low hanging fruit' with great return on investment, especially high energy valve leakage. This type of leakage leads to increased heat rate, potential valve damage and lost generation. The fundamental question to ask is 'What is 100 Btu/kW-hr of heat rate worth to your plant? On a 600 MW coal-fired power plant, a 1% leakage can lead to an 81 Btu/kW-hr impact on the main steam cycle and a 64 Btu/kW-hr impact on the hot reheat cycle. The article gives advice on methods to assist in detecting leaking valves and to monitor cycle isolation. A software product, TP. Plus-CIM was designed to estimate flow rates of potentially leaking valves.

Svensen, L.M. III; Zeigler, J.R.; Todd, F.D.; Alder, G.C. [Santee Copper, Moncks Corner, SC (United States)

2009-07-15T23:59:59.000Z

490

Scintillator spent fuel monitor  

SciTech Connect (OSTI)

A monitor for rapidly measuring the gross gamma-ray flux immediately above spent fuel assemblies in underwater storage racks has been developed. It consists of a plastic scintillator, photomultiplier, collimator, and a small battery-powered electronics package. The crosstalk from an isolated fuel assembly to an adjacent void is only about 2%. The mean difference between the measured gamma-ray flux and the flux estimated from the declared burnup and cooling time with a simple formula is 22%.

Moss, C.E.; Nixon, K.V.; Bernard, W.

1980-01-01T23:59:59.000Z

491

automatic stapling instrument: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

MUSICAL INSTRUMENT DETECTOR BY USING EVOLUTIONARY LEARNING METHOD Yoshiyuki Kobayashi SONY Corporation, Japan Yoshiyuki.Kobayashi@jp.sony.com ABSTRACT This paper presents a novel...

492

adaptive nonparametric instrumental: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

both selects Faraway, Julian 27 Spanish Version of the Sport Satisfaction Instrument (SSI) Adapted to Physical Education CiteSeer Summary: The objective of this research was to...

493

Tuesday, March 14, 2006 POSTER SESSION I: INSTRUMENT FACILITIES  

E-Print Network [OSTI]

-of-the-art instrument and the research that we will do with it. Kohout T. Elbra T. Pesonen L. J. Schnabl P. Slechta S

Rathbun, Julie A.

494

QAS 2.4 Instrument Calibration 5/26/95  

Broader source: Energy.gov [DOE]

The objective of this surveillance is to evaluate the implementation of the contractor's program to routinely calibrate instruments, alarms, and sensors.  The Facility Representative observes...

495

activation instrumental analysis: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

car electronics industry. There are currently many electronic systems improving the safety Wieringa, Roel 17 Runtime Instrumentation for Precise Flow-Sensitive Type Analysis...

496

Carbon Storage Monitoring, Verification and Accounting Research...  

Energy Savers [EERE]

Monitoring, Verification and Accounting Research Carbon Storage Monitoring, Verification and Accounting Research Reliable and cost-effective monitoring, verification and accounting...

497

USE OF SILICON CARBIDE MONITORS IN ATR IRRADIATION TESTING  

SciTech Connect (OSTI)

In April 2007, the Department of Energy (DOE) designated the Advanced Test Reactor (ATR) a National Scientific User Facility (NSUF) to advance US leadership in nuclear science and technology. By attracting new users from universities, laboratories, and industry, the ATR will support basic and applied nuclear research and development and help address the nation's energy security needs. In support of this new program, the Idaho National Laboratory (INL) has developed in-house capabilities to fabricate, test, and qualify new and enhanced temperature sensors for irradiation testing. Although most efforts emphasize sensors capable of providing real-time data, selected tasks have been completed to enhance sensors provided in irradiation locations where instrumentation leads cannot be included, such as drop-in capsule and Hydraulic Shuttle Irradiation System (HSIS) or 'rabbit' locations. For example, silicon carbide (SiC) monitors are now available to detect peak irradiation temperatures between 200°C and 800°C. Using a resistance measurement approach, specialized equipment installed at INL's High Temperature Test Laboratory (HTTL) and specialized procedures were developed to ensure that accurate peak irradiation temperature measurements are inferred from SiC monitors irradiated at the ATR. Comparison examinations were completed by INL to demonstrate this capability, and several programs currently rely on SiC monitors for peak temperature detection. This paper discusses the use of SiC monitors at the ATR, the process used to evaluate them at the HTTL, and presents representative measurements taken using SiC monitors.

K. L. Davis; B. Chase; T. Unruh; D. Knudson; J. L. Rempe

2012-07-01T23:59:59.000Z

498

1984 environmental monitoring report  

SciTech Connect (OSTI)

The environmental monitoring program has been designed to ensure that BNL facilities operate such that the applicable environmental standards and effluent control requirements have been met. A listing, as required by DOE Order 5484.1 of BNL facilities, of environmental agencies and permits is provided in the Environmental Program Information Section 3.0, Table B. Since the aquifer underlying Long Island has been designated a ''sole source'' aquifer, the Environmental Protection Agency (EPA) Drinking Water Standards have been used in the assessment of ground water data. However, the limits prescribed in the regulations are not directly applicable to the monitoring well data since (1) the standards apply to a community water supply system, i.e., one serving more than 25 individuals, and (2) the standards represent an annual average concentration. Since the monitoring wells are not components of the Laboratory's water supply system, the EPA drinking water standards are employed as reference criteria to which the surveillance well data is compared. The standards also serve as guidance levels for any appropriate remedial action. 36 refs., 9 figs., 40 tabs.

Day, L.E.; Miltenberger, R.P.; Naidu, J.R. (eds.)

1985-04-01T23:59:59.000Z

499

An implantable instrument for studying the long-term flight biology of migratory birds  

SciTech Connect (OSTI)

The design of an instrument deployed in a project studying the high altitude Himalayan migrations of bar-headed geese (Anser indicus) is described. The electronics of this archival datalogger measured 22 × 14 × 6.5 mm, weighed 3 g, was powered by a ˝AA-sized battery weighing 10 g and housed in a transparent biocompatible tube sealed with titanium electrodes for electrocardiography (ECG). The combined weight of 32 g represented less than 2% of the typical bodyweight of the geese. The primary tasks of the instrument were to continuously record a digitised ECG signal for heart-rate determination and store 12-bit triaxial accelerations sampled at 100 Hz with 15% coverage over each 2 min period. Measurement of atmospheric pressure provided an indication of altitude and rate of ascent or descent during flight. Geomagnetic field readings allowed for latitude estimation. These parameters were logged twice per minute along with body temperature. Data were stored to a memory card of 8 GB capacity. Instruments were implanted in geese captured on Mongolian lakes during the breeding season when the birds are temporarily flightless due to moulting. The goal was to collect data over a ten month period, covering both southward and northward migrations. This imposed extreme constraints on the design's power consumption. Raw ECG can be post-processed to obtain heart-rate, allowing improved rejection of signal interference due to strenuous activity of locomotory muscles during flight. Accelerometry can be used to monitor wing-beat frequency and body kinematics, and since the geese continued to flap their wings continuously even during rather steep descents, act as a proxy for biomechanical power. The instrument enables detailed investigation of the challenges faced by the geese during these arduous migrations which typically involve flying at extreme altitudes through cold, low density air where oxygen availability is significantly reduced compared to sea level.

Spivey, Robin J., E-mail: r.spivey@bangor.ac.uk, E-mail: c.bishop@bangor.ac.uk; Bishop, Charles M., E-mail: r.spivey@bangor.ac.uk, E-mail: c.bishop@bangor.ac.uk [Department of Biological Sciences, Bangor University, Gwynedd LL57 2UW (United Kingdom)

2014-01-15T23:59:59.000Z

500

Exposure information in environmental health research: Current opportunities and future directions for particulate matter, ozone, and toxic air pollutants  

SciTech Connect (OSTI)

Understanding and quantifying outdoor and indoor sources of human exposure are essential but often not adequately addressed in health-effects studies for air pollution. Air pollution epidemiology, risk assessment, health tracking and accountability assessments are examples of health-effects studies that require but often lack adequate exposure information. Recent advances in exposure modeling along with better information on time-activity and exposure factors data provide us with unique opportunities to improve the assignment of exposures for both future and ongoing studies linking air pollution to health impacts. In September 2006, scientists from the US Environmental Protection Agency (EPA) and the Centers for Disease Control and Prevention (CDC) along with scientists from the academic community and state health departments convened a symposium on air pollution exposure and health in order to identify, evaluate, and improve current approaches for linking air pollution exposures to disease. This manuscript presents the key issues, challenges and recommendations identified by the exposure working group, who used cases studies of particulate matter, ozone, and toxic air pollutant exposure to evaluate health-effects for air pollution. One of the over-arching lessons of this workshop is that obtaining better exposure information for these different health-effects studies requires both goal-setting for what is needed and mapping out the transition pathway from current capabilities to meeting these goals. Meeting our long-term goals requires definition of incremental steps that provide useful information for the interim and move us toward our long-term goals. Another over-arching theme among the three different pollutants and the different health study approaches is the need for integration among alternate exposure assessment approaches. For example, different groups may advocate exposure indicators, biomonitoring, mapping methods (GIS), modeling, environmental media monitoring, and/or personal exposure modeling. However, emerging research reveals that the greatest progress comes from integration among two or more of these efforts.

McKone, Thomas E.; Ryan, P. Barry; Ozkaynak, Haluk

2007-02-01T23:59:59.000Z