Powered by Deep Web Technologies
Note: This page contains sample records for the topic "outdoor lighting mv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Outdoor Solar Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Outdoor Solar Lighting Outdoor Solar Lighting Outdoor Solar Lighting July 29, 2012 - 6:34pm Addthis Outdoor solar lights use solar cells, which convert sunlight into electricity, and are easy to install and virtually maintenance free. | Photo courtesy of ©iStockphoto.com/ndejan Outdoor solar lights use solar cells, which convert sunlight into electricity, and are easy to install and virtually maintenance free. | Photo courtesy of ©iStockphoto.com/ndejan What does this mean for me? Outdoor solar lights are easy to install and virtually maintenance free They work in most areas of the United States Find out if replacement bulbs or batteries are available before you buy them Outdoor solar lights are easy to install and virtually maintenance free. Best of all, using them won't increase your electric bill. Popular home

2

Outdoor Solar Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Outdoor Solar Lighting Outdoor Solar Lighting Outdoor Solar Lighting July 29, 2012 - 6:34pm Addthis Outdoor solar lights use solar cells, which convert sunlight into electricity, and are easy to install and virtually maintenance free. | Photo courtesy of ©iStockphoto.com/ndejan Outdoor solar lights use solar cells, which convert sunlight into electricity, and are easy to install and virtually maintenance free. | Photo courtesy of ©iStockphoto.com/ndejan What does this mean for me? Outdoor solar lights are easy to install and virtually maintenance free They work in most areas of the United States Find out if replacement bulbs or batteries are available before you buy them Outdoor solar lights are easy to install and virtually maintenance free. Best of all, using them won't increase your electric bill. Popular home

3

Outdoor Solar Lighting | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

convert sunlight into electricity, and are easy to install and virtually maintenance free. | Photo courtesy of iStockphoto.comndejan Outdoor solar lights use solar cells,...

4

Federal Energy Management Program: Outdoor Solid State Lighting...  

NLE Websites -- All DOE Office Websites (Extended Search)

& Power Resources Renewable Energy Outdoor Solid State Lighting Case Studies Picture of LED lighting in a covered parking structure. LED lighting replaced aging systems in this...

5

Energy-saver's guide to good outdoor lighting  

SciTech Connect

Recent advances in outdoor lighting design and technology offer opportunities for improving the quality of outdoor lighting and significantly reducing energy consumption. This guidebook provides information on these developments and offers ideas on designing new systems or modifying existing systems.

1984-01-01T23:59:59.000Z

6

Outdoor Solid-State Lighting Technology Deployment | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technologies » Technology Deployment » Outdoor Solid-State Technologies » Technology Deployment » Outdoor Solid-State Lighting Technology Deployment Outdoor Solid-State Lighting Technology Deployment October 7, 2013 - 9:10am Addthis Outdoor solid-state lighting (SSL) technology has the potential to reduce U.S. lighting energy usage by nearly one half and contribute significantly to our nation's climate change solutions. The U.S. Department of Energy's (DOE) Buildings Technologies Office offers a wealth of information on its Solid-State Lighting website. Visit the site to find: SSL Basics Studies and Reports CALiPER Summary Reports Tools SSL Webcasts. Also see: FEMP Outdoor SSL Initiative: Resources for Outdoor SSL Applications outlines resources available for outdoor solid-state lighting projects. Better Buildings Alliance: This DOE initiative is driven and managed

7

Summer Loving-Energy-Efficient Outdoor Lighting! | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Summer Loving-Energy-Efficient Outdoor Lighting! Summer Loving-Energy-Efficient Outdoor Lighting! Summer Loving-Energy-Efficient Outdoor Lighting! June 20, 2013 - 9:47am Addthis Outdoor solar lights use solar cells, which convert sunlight into electricity, and are easy to install and virtually maintenance free. | Photo courtesy of ©iStockphoto.com/ndejan Outdoor solar lights use solar cells, which convert sunlight into electricity, and are easy to install and virtually maintenance free. | Photo courtesy of ©iStockphoto.com/ndejan Erin Connealy Communications Specialist, Office of Energy Efficiency and Renewable Energy How can I participate? Check to see if energy-efficient or solar lighting can fit your outdoor lighting needs this summer. One of the best things about summer to me is all the time I get to spend

8

Federal Energy Management Program: Outdoor Solid State Lighting...  

NLE Websites -- All DOE Office Websites (Extended Search)

& Structures Case Studies Resources Working Group Distributed Energy ResourcesCombined Heat & Power Resources Renewable Energy Outdoor Solid State Lighting Resources Picture of...

9

Federal Energy Management Program: Outdoor Solid-State Lighting...  

NLE Websites -- All DOE Office Websites (Extended Search)

Outdoor solid-state lighting (SSL) technology has the potential to reduce U.S. lighting energy usage by nearly one half and contribute significantly to our nation's climate...

10

FEMP Outdoor Solid State Lighting Intiative: Resources for Outdoor...  

NLE Websites -- All DOE Office Websites (Extended Search)

Fact Sheet - The Consortium shares technical information and experi- ences related to LED street and area light- ing demonstrations. The Consortium also serves as an objective...

11

Solid-State Lighting: Hitting the Target: ENERGY STAR® SSL Outdoor Area  

NLE Websites -- All DOE Office Websites (Extended Search)

Hitting the Target: ENERGY Hitting the Target: ENERGY STAR® SSL Outdoor Area Lighting Webcast to someone by E-mail Share Solid-State Lighting: Hitting the Target: ENERGY STAR® SSL Outdoor Area Lighting Webcast on Facebook Tweet about Solid-State Lighting: Hitting the Target: ENERGY STAR® SSL Outdoor Area Lighting Webcast on Twitter Bookmark Solid-State Lighting: Hitting the Target: ENERGY STAR® SSL Outdoor Area Lighting Webcast on Google Bookmark Solid-State Lighting: Hitting the Target: ENERGY STAR® SSL Outdoor Area Lighting Webcast on Delicious Rank Solid-State Lighting: Hitting the Target: ENERGY STAR® SSL Outdoor Area Lighting Webcast on Digg Find More places to share Solid-State Lighting: Hitting the Target: ENERGY STAR® SSL Outdoor Area Lighting Webcast on AddThis.com...

12

Outdoor Light-Emitting Diode (LED) Digital Signage  

Science Conference Proceedings (OSTI)

Utilities have been supporting outdoor advertising companies and their traditional simple billboards for many years. The level of support these billboards needed was minimal because electricity for them was only used to power basic lighting technologies. The growth in the billboard industry combined with the explosion in available electronic and digital systems and the advancements made in light-emitting diodes (LEDs) has resulted in a new type of billboard8212the LED electronic billboard. Electronic bil...

2009-12-17T23:59:59.000Z

13

IntenCity - 2 Solid State Outdoor Luminaire SL-3200 High Output LED Street Light  

Science Conference Proceedings (OSTI)

The product under assessment is an advanced lighting technology8212a solid state outdoor luminarie light emitting diode (LED) street lighting system designed to provide various levels of direct white light.

2008-06-12T23:59:59.000Z

14

FEMP Outdoor Solid State Lighting Intiative: Resources for Outdoor SSL Applications  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Municipal Solid-State Street Lighting Municipal Solid-State Street Lighting Consortium Fact Sheet - The Consortium shares technical information and experi- ences related to LED street and area light- ing demonstrations. The Consortium also serves as an objective resource for evalu- ating new products on the market intended for street and area lighting applications. http://apps1.eere.energy.gov/buildings/ publications/pdfs/ssl/consortium_fs.pdf DOE SSL GATEWAY Demonstration Project Results - DOE GATEWAY dem- onstrations showcase high-performance LED products for general illumination in a variety of commercial and residential applications. Demonstration results pro- vide real-world experience and data on state-of-the-art SSL product performance and cost effectiveness. DOE CALiPER Test Results - The DOE

15

Federal Energy Management Program: Outdoor Solid State Lighting...  

NLE Websites -- All DOE Office Websites (Extended Search)

a video on solid state lighting market transformation presented at the July 2011 DOE SSL Market Introduction Workshop. FEMP encourages Federal agencies to accelerate evaluation...

16

Lighting the Great Outdoors: LEDs in Exterior Applications  

SciTech Connect

Recent progress in the development of white light LEDs promises great impact by opening up the huge potential for LED illumination in new areas. One such area is general illumination for exterior applications. For example, there are an estimated combined 60.5 million roadway and parking installations in the U.S. These lights account for an estimated 53.3 TWh of electricity usage annually -- nearly 7% of all lighting. If LEDs could provide the same light performance with just 25% greater efficiency, savings of over 13 TWh could be achieved. In 2007, the authors assessed emerging LED lighting technologies in a parking garage and on a city street. The purpose of these tests was to enable a utility to determine whether energy efficiency programs promoting white light LED products might be justified. The results have supported the great promise of LEDs in exterior applications, while also highlighting the barriers that continue to hinder their widespread adoption. Such barriers include 1) inconsistent product quality across manufacturers; 2) lack of key metrics for comparing LEDs to conventional sources; and 3) high upfront cost of LED luminaires compared to conventional luminaires. This paper examines these barriers, ways in which energy-efficiency programs could help to overcome them, and the potential for energy and financial savings from LED lighting in these two exterior applications.

Cook, Tyson D. S.; Bryan, Mary M.; Kinzey, Bruce R.; Myer, Michael

2008-08-17T23:59:59.000Z

17

Hagerstown Light Department | Open Energy Information  

Open Energy Info (EERE)

Hagerstown Light Department Hagerstown Light Department Jump to: navigation, search Name Hagerstown Light Department Place Maryland Utility Id 7908 Utility Location Yes Ownership M NERC Location RFC NERC RFC Yes RTO PJM Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png GENERAL AND COMMERCIAL SERVICE Commercial LIGHT AND POWER SERVICE (HIGH LOAD FACTOR) Industrial LIGHT AND POWER SERVICE (Low Load Factor) Commercial OUTDOOR LIGHTING SERVICE (200 Watts)Fluorescent luminaire Lighting OUTDOOR LIGHTING SERVICE(100 Watts)Fluorescent luminaire Lighting OUTDOOR LIGHTING SERVICE(175 Watts MV)) Lighting

18

Dimming Controllers Offer Potential Energy Savings in Outdoor...  

NLE Websites -- All DOE Office Websites (Extended Search)

Sheet: * Introduction * HID Dimming * Conclusions Dimming Controllers Offer Potential Energy Savings in Outdoor Lighting Lighting control technology reduces energy consumption...

19

Outdoor Manners  

NLE Websites -- All DOE Office Websites (Extended Search)

Outdoor Manners Outdoor Manners Nature Bulletin No. 683-A June 10, 1978 Forest Preserve District of Cook County George W. Dunne, President Roland F. Eisenbeis, Supt. of Conservation OUTDOOR MANNERS I AM AN OLD TIME COUNTRY LANE -- just a plain dirt road with a lot of ups and downs, built by the pioneers who settled this region. I was abandoned, thank goodness, after those tin Lizzies began to honk and rattle through the country. They didn't like me and I didn't like them. For more than a century, people went this way on foot, on horseback, and in vehicles drawn by horses or mules. I became well acquainted with many of them and some of their great-grandchildren. They became acquainted with my trees, my wildflowers, the birds and all of my wild creatures. In those days most folks were friendly, neighborly people. They had time to stop, visit, look and listen.

20

The MV-I  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

The MV-I The MV-I (formerly the WAVE - "Wheelchair Accessible Vehicle for Everyone") The Vehicle Production Group LLC Loan Application for the MV-I Description of Proposed Action: The Department of Energy's (DOE) proposed action is to issue a loan to The Vehicle Production Group LLC (VPG) for an MV-I vehicle, the assembly of which would take place in an existing facility, currently fully equipped to assemble vehicles. The Vehicle Production Group has applied for a loan in response to the Advanced Technology Vehicle Manufacturing (ATVM) Loan Program that was established pursuant to Section 136 of the Energy Independence and Security Act of 2007, as amended, which provides for loans to eligible automobile manufacturers and component suppliers for projects that

Note: This page contains sample records for the topic "outdoor lighting mv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Federal Energy Management Program: Outdoor Solid State Street...  

NLE Websites -- All DOE Office Websites (Extended Search)

& Structures Case Studies Resources Working Group Distributed Energy ResourcesCombined Heat & Power Resources Renewable Energy Outdoor Solid State Street and Roadway Lighting...

22

Lighting Group: Light Distribution Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Retrofit Alternatives to Incandescent Downlights Hotel and Institutional Bathroom Lighting Portable Office Lighting Systems Low Glare Outdoor Retrofit Luminaire LED Luminaires...

23

Outdoor science field trips.  

E-Print Network (OSTI)

??The purpose of this study was to assess the cognitive and affective values of an outdoor science field trip. Participants were 28 fifth grade students, (more)

Loyd, Kerrie Anne Therese

2004-01-01T23:59:59.000Z

24

Conservation and Outdoor Education  

NLE Websites -- All DOE Office Websites (Extended Search)

District of Cook County George W. Dunne, President Roland F. Eisenbeis, Supt. of Conservation CONSERVATION AND OUTDOOR EDUCATION IN THE FOREST PRESERVE DISTRIC. The Forest...

25

NREL: Photovoltaics Research - Outdoor Test Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

Outdoor Test Facility Aerial photo of the Outdoor Test Facility. The Outdoor Test Facility at NREL is used to evaluate prototype, precommercial, and commercial modules. Outdoor...

26

Outdoor PV Degradation Comparison  

DOE Green Energy (OSTI)

As photovoltaic (PV) penetration of the power grid increases, it becomes vital to know how decreased power output; may affect cost over time. In order to predict power delivery, the decline or degradation rates must be determined; accurately. At the Performance and Energy Rating Testbed (PERT) at the Outdoor Test Facility (OTF) at the; National Renewable Energy Laboratory (NREL) more than 40 modules from more than 10 different manufacturers; were compared for their long-term outdoor stability. Because it can accommodate a large variety of modules in a; limited footprint the PERT system is ideally suited to compare modules side-by-side under the same conditions.

Jordan, D. C.; Smith, R. M.; Osterwald, C. R.; Gelak, E.; Kurtz, S. R.

2011-02-01T23:59:59.000Z

27

Outdoor Play and Playground Use  

Science Conference Proceedings (OSTI)

... While each classroom strives to accomplish both morning and afternoon outdoor play times, the weather sometimes prohibits such activity, or ...

2010-10-05T23:59:59.000Z

28

Outdoor Education in the Greek Mathematics Textbooks.  

E-Print Network (OSTI)

?? Outdoor education is a promising educational field that can support indoor education and provide benefits beyond the evidentknowledge. Outdoor and indoor education together can (more)

Skouroupathis, Nicolas

2013-01-01T23:59:59.000Z

29

Data:Cb49271f-3d45-4b28-a5c1-44e884e5e18d | Open Energy Information  

Open Energy Info (EERE)

Coop of Mich Effective date: 20101002 End date if known: Rate name: Outdoor Lighting - LED Alternative for 175 watt MV Sector: Lighting Description: OUTDOOR PROTECTIVE LIGHTING...

30

Data:2997e756-dff7-4dd8-97dd-f659a2765c10 | Open Energy Information  

Open Energy Info (EERE)

Energy Coop Effective date: 20111111 End date if known: Rate name: Outdoor Lighting - LED Alternative to 175 watt MV Sector: Lighting Description: OUTDOOR LIGHTING SERVICE - LED...

31

Development of a Measurement and Verification (M&V) Costing Toolkit  

E-Print Network (OSTI)

This paper discusses the development of a M&V Costing Toolkit that has been developed to assist the U.S. Army with the standardization of costing procedures for measuring and verifying energy savings from Energy Service Performance Contracts (ESPC) at army bases. This M&V costing toolkit contains pricing for a wide-variety of sensors, data loggers, portable data loggers and transducers used to measure energy savings from energy conservation retrofits to buildings. The M&V costing toolkit also contains a framework for pricing the installation, maintaining the equipment, and the removal of instrumentation associated with the measurement of energy savings. The toolkit includes costing procedures for collecting the data from remote sites, archiving of the data, QC procedures, data analysis, savings reporting, and project closeout costing. This paper presents a general overview of the M&V costing process, various methods for monitoring and verifying savings, and a description of the M&V Costing Toolkit. Two examples of the use of the M&V Costing Toolkit are also presented. Twelve additional examples are provided with the toolkit, including the M&V of boilers, chillers, Energy Management and Control System (EMCS), and lighting retrofits (Haberl et al. 2003b).

Haberl, J. S.; Lewis, T.; Im, P.; Carlson, K. A.; Underwood, D.

2004-01-01T23:59:59.000Z

32

Types of Lighting | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

selection. Types of lighting include: Fluorescent Incandescent Outdoor solar Light-emitting diode (LED) Also learn how energy-efficient lightbulbs compare to traditional...

33

Lighting Design | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Design Design Lighting Design July 29, 2012 - 6:28pm Addthis Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. | Photo courtesy of ©iStockphoto.com/chandlerphoto. Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. | Photo courtesy of ©iStockphoto.com/chandlerphoto. How does it work? Buy ENERGY STAR-rated lighting for the highest quality, energy-efficient lighting. Use timers and other controls to turn lights on and off. Use outdoor solar lighting. Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. If you're constructing a new house, consider lighting as part of your whole-house design -- an

34

Low-Pressure Sodium Lighting  

Energy.gov (U.S. Department of Energy (DOE))

Low-pressure sodium lighting provides more energy-efficient outdoor lighting than high-intensity discharge lighting, but it has very poor color rendition. Typical applications include highway and...

35

SUBCHAPTER D. OUTDOOR BURNING Sec. 352.081. REGULATION OF OUTDOOR BURNING. (a) In this  

E-Print Network (OSTI)

SUBCHAPTER D. OUTDOOR BURNING Sec. 352.081. REGULATION OF OUTDOOR BURNING. (a) In this section measurement that takes into consideration the burning index, spread component, or ignition component court of a county by order may prohibit or restrict outdoor burning in general or outdoor burning

36

Color models for outdoor machine vision  

Science Conference Proceedings (OSTI)

This study develops models for illumination and surface reflectance for use in outdoor color vision, and in particular for predicting the color of surfaces under outdoor conditions. Existing daylight and reflectance models have limitations that reduce ... Keywords: color, daylight, outdoor images, photometric function, reflectance model

Shashi D. Buluswar; Bruce A. Draper

2002-02-01T23:59:59.000Z

37

Browse wiki | Open Energy Information  

Open Energy Info (EERE)

kW + OpenEIUtilityRateDescription OUTDOOR PROTECTIVE LIGHTING SERVICE - LED ... OUTDOOR PROTECTIVE LIGHTING SERVICE - LED Alternative - 175W MV SCHEDULE PL *...

38

Lighting.  

SciTech Connect

Since lighting accounts for about one-third of the energy used in commercial buildings, there is opportunity to conserve. There are two ways to reduce lighting energy use: modify lighting systems so that they used less electricity and/or reduce the number of hours the lights are used. This booklet presents a number of ways to do both. Topics covered include: reassessing lighting levels, reducing lighting levels, increasing bulb & fixture efficiency, using controls to regulate lighting, and taking advantage of daylight.

United States. Bonneville Power Administration.

1992-09-01T23:59:59.000Z

39

Energy Basics: Low-Pressure Sodium Lighting  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Low-Pressure Sodium Lighting Low-pressure sodium lighting provides more energy-efficient outdoor lighting than high-intensity discharge lighting, but it has very poor color...

40

Contaminated Outdoor High Voltage Insulators  

Science Conference Proceedings (OSTI)

The external insulation of power lines and outdoor substations is a weak point in transmission systems. The insulation is particularly susceptible to failure if proper attention has not been given to its design, condition monitoring, and maintenance. In regions with high contamination levels, regular maintenance and the application of palliative measures can be critical to ensure that the system meets its outage performance targets. This can involve pure maintenance measures such as cleaning the insulato...

2009-12-22T23:59:59.000Z

Note: This page contains sample records for the topic "outdoor lighting mv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

LS-81 MCT/MV1125  

NLE Websites -- All DOE Office Websites (Extended Search)

1 1 MCT/MV1125 January 29, 1987 EVALUATION OF AMPLITUDE AND FREQUENCY RESPONSE CHARACTERISTICS OF THE TEAC MODEL MR-30 TAPE RECORDER by J. A. Jendrzejczyk and R. K. Smith Materials and Components Technologr Division 1.0 OBJECTIVE Verify operation of the Teac model MR-30 tape recorder at tape speeds and conditions representative of those associated with the collection of ground motion and building vibration data. 2.0 TEST PROCEDURE The basic test setup is shown in Fig. 1. All seven record amplifier inputs are connected in parallel with a random noise generator that supplies the input test vol tage. Outputs, which are generated in the playback mode, are compared to a reference from the random noise generator and a transfer function is calculated via a HP model 5451C Fast

42

Lighting  

Energy.gov (U.S. Department of Energy (DOE))

There are many different types of artificial lights, all of which have different applications and uses.Types of lighting include:

43

Reducing indoor residential exposures to outdoor pollutants  

SciTech Connect

The basic strategy for providing indoor air quality in residences is to dilute indoor sources with outdoor air. This strategy assumes that the outdoor air does not have pollutants at harmful levels or that the outdoor air is, at least, less polluted than the indoor air. When this is not the case, different strategies need to be employed to ensure adequate air quality in the indoor environment. These strategies include ventilation systems, filtration and other measures. These strategies can be used for several types of outdoor pollution, including smog, particulates and toxic air pollutants. This report reviews the impacts that typical outdoor air pollutants can have on the indoor environment and provides design and operational guidance for mitigating them. Poor quality air cannot be used for diluting indoor contaminants, but more generally it can become an indoor contaminant itself. This paper discusses strategies that use the building as protection against potentially hazardous outdoor pollutants, including widespread pollutants, accidental events, and potential attacks.

Sherman, Max H.; Matson, Nance E.

2003-07-01T23:59:59.000Z

44

Automotive Accessibility and Efficiency Meet in the Innovative MV-1 |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Automotive Accessibility and Efficiency Meet in the Innovative MV-1 Automotive Accessibility and Efficiency Meet in the Innovative MV-1 Automotive Accessibility and Efficiency Meet in the Innovative MV-1 March 11, 2011 - 4:03pm Addthis The MV-1, a new wheelchair accessible, fuel-efficient vehicle | Photo Courtesy of Vehicle Production Group The MV-1, a new wheelchair accessible, fuel-efficient vehicle | Photo Courtesy of Vehicle Production Group Daniel B. Poneman Daniel B. Poneman Deputy Secretary of Energy Yesterday, the Department of Energy announced that we've now finalized a loan for nearly $50 million to the Vehicle Production Group - or VPG. The project will support the development and manufacturing of a new wheelchair accessible, fuel-efficient car, the MV-1, that will run on compressed natural gas instead of gasoline, produce low emissions, and create 900 jobs

45

Lighting Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting Basics Lighting Basics Lighting Basics August 15, 2013 - 5:12pm Addthis Text Version There are many different types of artificial lights, all of which have different applications and uses. Types of lighting include: Fluorescent Lighting High-intensity Discharge Lighting Incandescent Lighting LED Lighting Low-pressure Sodium Lighting. Which type is best depends on the application. See the chart below for a comparison of lighting types. Lighting Comparison Chart Lighting Type Efficacy (lumens/watt) Lifetime (hours) Color Rendition Index (CRI) Color Temperature (K) Indoors/Outdoors Fluorescent Straight Tube 30-110 7000-24,000 50-90 (fair to good) 2700-6500 (warm to cold) Indoors/outdoors Compact Fluorescent 50-70 10,000 65-88 (good) 2700-6500 (warm to cold) Indoors/outdoors

46

Reducing Indoor Residential Exposures to Outdoor Pollutants  

NLE Websites -- All DOE Office Websites (Extended Search)

Reducing Indoor Residential Exposures to Outdoor Pollutants Reducing Indoor Residential Exposures to Outdoor Pollutants Title Reducing Indoor Residential Exposures to Outdoor Pollutants Publication Type Journal Article LBNL Report Number LBNL-51758 Year of Publication 2003 Authors Sherman, Max H., and Nance Matson Start Page Chapter Abstract Basic strategy for providing indoor air quality in residences is to dilute indoor sources with outdoor air. This strategy assumes that the outdoor air does not have pollutants at harmful levels or that the outdoor air is, at least, less polluted than the indoor air. When this is not the case, different strategies need to be employed to ensure adequate air quality in the indoor environment. These strategies include ventilation systems, filtration and other measures. These strategies can be used for several types of outdoor pollution, including smog, particulates and toxic air pollutants. This report reviews the impacts that typical outdoor air pollutants can have on the indoor environment and provides design and operational guidance for mitigating them. Poor quality air cannot be used for diluting indoor contaminants, but more generally it can become an indoor contaminant itself. This paper discusses strategies that use the building as protection against potentially hazardous outdoor pollutants, including widespread pollutants, accidental events, and potential attacks

47

Measuring Outdoor Airflow into HVAC Systems  

E-Print Network (OSTI)

MEASURING OUTDOOR AIRFLOW INTO HVAC SYSTEMS W i l l i a m J.minimum OA flow rate if HVAC system has an economizer

Fisk, William J.; Faulkner, David; Sullivan, Douglas P.

2005-01-01T23:59:59.000Z

48

Indoor to Outdoor Channel Measurements & Models  

Science Conference Proceedings (OSTI)

... delay dispersion statistics for outdoor-indoor average PDPs (all values in ns). Band RMS Delay Spread Delay Window 90% Energy Delay Interval ...

2012-10-31T23:59:59.000Z

49

Outdoor Recreation Participation Trends in Texas  

E-Print Network (OSTI)

Outdoor recreation is a popular pastime in Texas. This publication reports on the participation and trends in outdoor recreation in the U.S. and Texas revealed in the National Survey on Recreation and the Environment conducted by the U.S. Forest Service.

Schuett, Michael A.; Shafer, Carl Scott; Lu, Jiaying

2009-01-06T23:59:59.000Z

50

Thurmont Municipal Light Co | Open Energy Information  

Open Energy Info (EERE)

Thurmont Municipal Light Co Thurmont Municipal Light Co Jump to: navigation, search Name Thurmont Municipal Light Co Place Maryland Utility Id 18901 Utility Location Yes Ownership M NERC Location RFC NERC RFC Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png LARGE GENERAL SERVICE Primary Voltage Industrial LARGE GENERAL SERVICE Secondary Voltage Industrial MEDIUM GENERAL SERVICE Industrial OUTDOOR LIGHTING SERVICE(11,000) Lighting OUTDOOR LIGHTING SERVICE(20,000) Lighting OUTDOOR LIGHTING SERVICE(400w) Lighting OUTDOOR LIGHTING SERVICE(7,000) Lighting RESIDENTIAL SERVICE Residential

51

Lighting  

SciTech Connect

The lighting section of ASHRAE standard 90.1 is discussed. It applies to all new buildings except low-rise residential, while excluding specialty lighting applications such as signage, art exhibits, theatrical productions, medical and dental tasks, and others. In addition, lighting for indoor plant growth is excluded if designed to operate only between 10 p.m. and 6 a.m. Lighting allowances for the interior of a building are determined by the use of the system performance path unless the space functions are not fully known, such as during the initial stages of design or for speculative buildings. In such cases, the prescriptive path is available. Lighting allowances for the exterior of all buildings are determined by a table of unit power allowances. A new addition the exterior lighting procedure is the inclusion of facade lighting. However, it is no longer possible to trade-off power allotted for the exterior with the interior of a building or vice versa. A significant change is the new emphasis on lighting controls.

McKay, H.N. (Hayden McKay Lighting Design, New York, NY (US))

1990-02-01T23:59:59.000Z

52

Measuring rates of outdoor airflow into HVAC systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Measuring rates of outdoor airflow into HVAC systems Title Measuring rates of outdoor airflow into HVAC systems Publication Type Journal Article LBNL Report Number LBNL-51583 Year...

53

The Transformation of Outdoor Ammonium Nitrate Aerosols in the...  

NLE Websites -- All DOE Office Websites (Extended Search)

The Transformation of Outdoor Ammonium Nitrate Aerosols in the Indoor Environment Title The Transformation of Outdoor Ammonium Nitrate Aerosols in the Indoor Environment...

54

Solid-State Lighting: Text-Alternative Version: Hitting the Target: ENERGY  

NLE Websites -- All DOE Office Websites (Extended Search)

Text-Alternative Version: Text-Alternative Version: Hitting the Target: ENERGY STAR® SSL Outdoor Area Lighting to someone by E-mail Share Solid-State Lighting: Text-Alternative Version: Hitting the Target: ENERGY STAR® SSL Outdoor Area Lighting on Facebook Tweet about Solid-State Lighting: Text-Alternative Version: Hitting the Target: ENERGY STAR® SSL Outdoor Area Lighting on Twitter Bookmark Solid-State Lighting: Text-Alternative Version: Hitting the Target: ENERGY STAR® SSL Outdoor Area Lighting on Google Bookmark Solid-State Lighting: Text-Alternative Version: Hitting the Target: ENERGY STAR® SSL Outdoor Area Lighting on Delicious Rank Solid-State Lighting: Text-Alternative Version: Hitting the Target: ENERGY STAR® SSL Outdoor Area Lighting on Digg Find More places to share Solid-State Lighting: Text-Alternative

55

LaCreek Electric Assn, Inc | Open Energy Information  

Open Energy Info (EERE)

0558 0558 Utility Location Yes Ownership C NERC Location MRO NERC MRO Yes ISO Other Yes Activity Transmission Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Large Power Industrial Large Power Heating Industrial Outdoor Lighting HPS 100W Metered Lighting Outdoor Lighting HPS 175W Metered Lighting Outdoor Lighting Lucalox Lighting Outdoor Lighting MH 400W Lighting Outdoor Lighting MH 400W Metered Lighting Outdoor Lighting MV 100W Metered Lighting Outdoor Lighting MV 175W Lighting Outdoor Lighting MV 175W Metered Lighting Outdoor Lighting MV 400W Lighting

56

Intelligent street lighting application for electric power distribution systems the business case for smartgrid technology.  

E-Print Network (OSTI)

??This research project builds upon previous work related to intelligent and energy efficient lighting in modern street and outdoor lighting systems. The concept of implementing (more)

Davis, Wesley O'Brian Sr.

2011-01-01T23:59:59.000Z

57

Application of Risk Analysis to Evaluating M&V Requirement for Energy Efficiency Program  

E-Print Network (OSTI)

Since 2005, CIPP of New York Energy Smart has waived the monitoring requirement for lighting projects with small projected savings that are 600,000 kWh/yr or less. There is potential to further increase the threshold savings with additional administrative efficiencies, but also with increased risk that the estimated savings may not be realized. This paper presented a risk analysis of the threshold for small lighting projects by running a Monte Carlo simulation. The preliminary result of this study shows that increasing the size of lighting project savings for which M&V is waived to 1,400,000 kWh per year would introduce an error of only 5% to the sum of all lighting savings. The error introduced at the program level would be approximately 2%. The lessons from this experiment may be used to conduct large-scale risk analysis to optimize evaluation cost allocations for more complex energy efficiency program portfolio.

Tan, G.; Gregoire, C.; Gogte, S.; Gowans, D.

2007-01-01T23:59:59.000Z

58

Solid-State Lighting: 2011 Municipal Consortium Southwest Region...  

NLE Websites -- All DOE Office Websites (Extended Search)

and Market Assessment of Networked Outdoor Lighting Controls Mark Rehley, NEEA; Jordan Shackelford, Energy Solutions MSSLC Specification for Remote Monitoring and...

59

Market-Based Programs: Solid-State Lighting GATEWAY Demonstrations  

NLE Websites -- All DOE Office Websites (Extended Search)

Photo of a post-top outdoor light along a walkway through a wooded park. Museums Put LED Lighting on Display Museums rank among the most exacting of all lighting applications....

60

Outdoor Visual Position Estimation for Planetary Rovers  

Science Conference Proceedings (OSTI)

This paper describes (1) a novel, effective algorithm for outdoor visual position estimation; (2) the implementation of this algorithm in the Viper system; and (3) the extensive tests that have demonstrated the superior accuracy and speed of ... Keywords: computer vision, mobile robots, position estimation, space robotics

Fabio Cozman; Eric Krotkov; Carlos Guestrin

2000-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "outdoor lighting mv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Abstraction and depiction of sparsely scanned outdoor environments  

Science Conference Proceedings (OSTI)

This paper describes various techniques and applications of rendering three-dimensionally digitized outdoor en- vironments in non-photorealistic rendering styles. The difficulty in rendering outdoor environments is accommodating their inaccuracy, incompleteness, ...

Hui Xu; Nathan Gossett; Baoquan Chen

2005-05-01T23:59:59.000Z

62

Supporting outdoor mixed reality applications for architecture and cultural heritage  

Science Conference Proceedings (OSTI)

This paper introduces new approaches to enable collaborative outdoor mixed reality design review in the architectural domain as well as outdoor mixed reality experiences in the cultural heritage domain. For this purpose we present the results of three ... Keywords: cultural heritage, design review, display technologies, human computer interaction, outdoor mixed reality, pose estimation, rendering

Pedro Santos; Dominik Acri; Thomas Gierlinger; Hendrik Schmedt; Andr Stork

2010-04-01T23:59:59.000Z

63

COMMISSIONING AND OPERATION OF THE CEBAF 100 MV CRYOMODULES  

Science Conference Proceedings (OSTI)

The Continuous Electron Beam Accelerator Facility (CEBAF) energy upgrade from 6 GeV to 12 GeV includes the installation of ten new 100 MV cryomodules and RF systems. The superconducting RF cavities are designed to operate CW at a maximum accelerating gradient of 19.3 MV/m. To support the higher gradients and higher Q{sub L} ({approx} 3 x 10{sup 7}), a new RF system has been developed and is being installed to power and control the cavities. The RF system employs digital control and 13 kW klystrons. Recently, two of these cryomodules and associated RF hardware and software have been installed and commissioned in the CEBAF accelerator. Electrons at linac currents up to 540 {micro}A have been successfully accelerated and used for nuclear physics experiments. This paper reports on the commissioning and operation of the RF system and cryomodules.

Allison, Trent; Davis, G; Drury, Michael; Harwood, Leigh; Hogan, John; Kimber, Andrew; Lahti, George; Merz, William; Nelson, Richard; Plawski, Tomasz; Seidman, David; Spata, Michael; Wilson, Michael

2012-07-01T23:59:59.000Z

64

Determining Outdoor CPV Cell Temperature (Presentation)  

DOE Green Energy (OSTI)

An accurate method is needed for determining cell temperature when measuring CPV modules outdoors. It has been suggested that cell temperature can be calculated though a procedure that shutters sunlight to the cells while measuring the transients in open-circuit voltage (Voc) and heat sink temperature. This presentation documents application of this shutter procedure to multiple CPV modules at NREL. The challenges and limitations are presented along with an alternate approach to measuring CPV cell operating temperature.

Muller, M.

2011-04-01T23:59:59.000Z

65

Determining Outdoor CPV Cell Temperature: Preprint  

DOE Green Energy (OSTI)

An accurate method is needed for determining cell temperature when measuring CPV modules outdoors. It has been suggested that cell temperature can be calculated though a procedure that shutters sunlight to the cells while measuring the transients in open-circuit voltage (Voc) and heat sink temperature. This paper documents application of this shutter procedure to multiple CPV modules at NREL. The challenges and limitations are presented along with an alternate approach to measuring CPV cell operating temperature.

Muller, M.; Deline, C.; Marion, B.; Kurtz, S.; Bosco, N.

2011-07-01T23:59:59.000Z

66

Evaluation of Cooling Solutions for Outdoor Electronics  

E-Print Network (OSTI)

The thermal management of an outdoor electronic enclosure can be quite challenging due to the additional thermal load from the sun and the requirement of having an air-sealed enclosure. It is essential to consider the effect of solar heating loads in the design process; otherwise, it can shorten the life expectancy of the electronic product or lead to catastrophic failure. In this paper we analyze and compare the effectiveness of different cooling techniques used for outdoor electronics. Various cooling techniques were compared like special coatings and paints on the outer surface, radiation shields, double-walled vented enclosures, fans for internal air circulation and air-to-air heat exchangers. A highly simplified, typical outdoor system was selected for this study measuring approximately 300x300x400 mm (WxLxH). Solar radiation was incident on 3 sides of the enclosure. There were 8 equally spaced PCBs inside the enclosure dissipating 12.5W each uniformly (100 watts total). A computational fluid dynamics (CFD) model of the system was built and analyzed. This was followed by building a mock-up of the system and conducting experiments to validate the CFD model. It was found that some of the simplest cooling techniques like white oil paint on the outer surface can significantly reduce the impact of solar loads. Adding internal circulation fans can also be very effective. Using air-to-air heat exchangers was found to be the most effective solution although it is more complex and costly.

Mahendra Wankhede; V. Khaire; A. Goswami; S. D. Mahajan

2008-01-07T23:59:59.000Z

67

Evaluation of Cooling Solutions for Outdoor Electronics  

E-Print Network (OSTI)

The thermal management of an outdoor electronic enclosure can be quite challenging due to the additional thermal load from the sun and the requirement of having an air-sealed enclosure. It is essential to consider the effect of solar heating loads in the design process; otherwise, it can shorten the life expectancy of the electronic product or lead to catastrophic failure. In this paper we analyze and compare the effectiveness of different cooling techniques used for outdoor electronics. Various cooling techniques were compared like special coatings and paints on the outer surface, radiation shields, double-walled vented enclosures, fans for internal air circulation and air-to-air heat exchangers. A highly simplified, typical outdoor system was selected for this study measuring approximately 300x300x400 mm (WxLxH). Solar radiation was incident on 3 sides of the enclosure. There were 8 equally spaced PCBs inside the enclosure dissipating 12.5W each uniformly (100 watts total). A computational fluid dynamics (C...

Wankhede, Mahendra; Goswami, A; Mahajan, S D

2008-01-01T23:59:59.000Z

68

Survey of utility lighting programs: Final report  

SciTech Connect

Reshaping loads is a major goal of utility lighting efforts. Nearly 60% of the utilities in this survey use lighting for demand-side management. The most popular programs promote lighting efficiency to reduce daytime peaks and outdoor security lighting to increase off-peak loads.

Isaksen, L.

1987-02-01T23:59:59.000Z

69

Full Spectrum Light Therapy Full spectrum light bulbs are said to not only improve mood, but also  

E-Print Network (OSTI)

Full Spectrum Light Therapy Full spectrum light bulbs are said to not only improve mood, but also spectrum light bulbs produce light that is seen by the human eye in a bluish-white tint. Where is full energy, learning ability, and behavior. Light therapy mimics outdoor light and causes a biochemical

Bates, Rebecca A.

70

Data:445d426e-8503-4331-82d7-db5b8d07dd8f | Open Energy Information  

Open Energy Info (EERE)

MV without Pole) Sector: Lighting Description: Applicable only to outdoor lighting by ballast operated vapor lamp fixtures, either Mercury Vapor, Pressure Sodium, or Metal Halide....

71

Data:4383f60e-b140-4087-b642-a716217c9927 | Open Energy Information  

Open Energy Info (EERE)

W MV with Pole) Sector: Lighting Description: Applicable only to outdoor lighting by ballast operated vapor lamp fixtures, either Mercury Vapor, Pressure Sodium, or Metal Halide....

72

Data:A97d4360-0ad8-4d10-ad37-23a878a1e3f7 | Open Energy Information  

Open Energy Info (EERE)

MV without Pole) Sector: Lighting Description: Applicable only to outdoor lighting by ballast operated vapor lamp fixtures, either Mercury Vapor, Pressure Sodium, or Metal Halide....

73

Data:4df36a5c-1301-4c53-9017-92328028cfe4 | Open Energy Information  

Open Energy Info (EERE)

MV without Pole) Sector: Lighting Description: Applicable only to outdoor lighting by ballast operated vapor lamp fixtures, either Mercury Vapor, Pressure Sodium, or Metal Halide....

74

Development of a Monitoring and Verification (M&V) Plan and Baseline for the Fort Hood ESPC Project  

E-Print Network (OSTI)

Fort Hood has selected an Energy Services Performance Contract (ESPC) contractor to help achieve its energy reduction goals as mandated by Executive Order. This ESPC is expected to be a $3.8 million, 20 year contract, which includes five primary types of Energy Conservation Measures (ECMs) in 56 buildings, and includes boiler insulation, control system upgrades, vending machine controls, cooling tower variable frequency drives (VFDs), and lighting retrofits. The plan of action for the ESPC includes cost effective M&V, using IPMVP Options B and C for the first two years after the retrofits are installed, and Option A combined with annual performance verification for the remainder of the contract. This paper discusses the development the Measurement and Verification (M&V) Plan for the Fort Hood Energy Services Performance Contract, and includes results of the baseline calculations (Haberl et al. 2002, 2003b).

Haberl, J. S.; Liu, Z.; Baltazar-Cervantes, J. C.; Lynn, B.; Underwood, D.

2004-01-01T23:59:59.000Z

75

Comparing Light-Emitting Diode (LED) Street and Area Lighting to Traditional Lighting Technologies  

Science Conference Proceedings (OSTI)

In 2008, the Tennessee Valley Authority (TVA) and Benton County Electric System partnered with the Electric Power Research Institute (EPRI) to launch an investigation into the use of LED technology for area lighting. The goal of the projectcalled the LED Street and Area Lighting Demonstrationwas to discover a better light bulb, one that not only meets the outdoor lighting requirements of consumers, but also uses less electricity in doing so. This case study discusses the results of ...

2012-09-28T23:59:59.000Z

76

UVOC-MAC: a MAC protocol for outdoor ultraviolet networks  

Science Conference Proceedings (OSTI)

UVOC-MAC: a MAC protocol for outdoor ultraviolet networks. Yiyang Li Jianxia Ning Zhengyuan Xu . Srikanth V. Krishnamurthy Gang Chen. Springer...

77

Minimizing Variation in Outdoor CPV Power Ratings: Preprint  

DOE Green Energy (OSTI)

The CPV community has agreed to have both indoor and outdoor power ratings at the module level. The indoor rating provides a repeatable measure of module performance as it leaves the factory line while the outdoor rating provides a measure of true performance under real world conditions. The challenge with an outdoor rating is that the spectrum, temperature, wind speed, etc are constantly in flux and therefore the resulting power rating varies from day to day and month to month. This work examines different methodologies for determining the outdoor power rating with the goal of minimizing variation even if data are collected under changing meteorological conditions.

Muller, M.; Marion, B.; Rodriguez, J.; Kurtz, S.

2011-07-01T23:59:59.000Z

78

Federal Energy Management Program: Outdoor Solid State Parking...  

NLE Websites -- All DOE Office Websites (Extended Search)

& Structures Case Studies Resources Working Group Distributed Energy ResourcesCombined Heat & Power Resources Renewable Energy Outdoor Solid State Parking Lot and Structure...

79

Standard Measurement & Verification Plan for Lighting Equipment Retrofit or Replacement Projects  

Science Conference Proceedings (OSTI)

This document provides a framework for a standard Measurement and Verification (M&V) plan for lighting projects. It was developed to support cost-effective retrofits (partial and complete replacements) of lighting systems and is intended to provide a foundation for an M&V plan for a lighting retrofit utilizing a "best practice" approach, and to provide guidance to site owners, contractors, and other involved organizations on what is essential for a robust M&V plan for lighting projects. This document provides examples of appropriate elements of an M&V plan, including the calculation of expected energy savings. The standard M&V plan, as provided, also allows for consistent comparison with other similar lighting projects. Although intended for lighting retrofit applications, M&V plans developed per this framework document may also be used for other non-lighting technology retrofits and new installations.

Richman, Eric E.

2009-11-04T23:59:59.000Z

80

Standard Measurement and Verification Plan for Lighting Retrofit Projects for Buildings and Building Sites  

SciTech Connect

This document provides a framework for standard measurement and verification (M&V) of lighting retrofit and replacement projects. It was developed to provide site owners, contractors, and other involved organizations with the essential elements of a robust M&V plan for lighting projects. It includes details on all aspects of effectively measuring light levels of existing and post-retrofit projects, conducting power measurement, and developing cost-effectiveness analysis. This framework M&V plan also enables consistent comparison among similar lighting projects, and may be used to develop M&V plans for non--lighting-technology retrofits and new installations.

Richman, Eric E.

2012-10-31T23:59:59.000Z

Note: This page contains sample records for the topic "outdoor lighting mv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Electric energy savings and light guides  

Science Conference Proceedings (OSTI)

Light guides are systems which serve for illumination of internal windowless parts of buildings. Their function is based on the principle of light transport from outdoor to distant indoor places due to multi-reflections on their highly reflective internal ... Keywords: daylight, energy savings, illuminance, light guides, solar energy, solar radiation

Jitka Mohelnikova

2008-02-01T23:59:59.000Z

82

Conservation and Outdoor Education in the Schools  

NLE Websites -- All DOE Office Websites (Extended Search)

Education in the Schools Education in the Schools Nature Bulletin No. 374-A March 21, 1970 Forest Preserve District of Cook County George W. Dunne, President Roland F. Eisenbeis, Supt. of Conservation CONSERVATION AND OUTDOOR EDUCATION IN THE SCHOOLS Given a favorable climate, two things make and keep a nation great: its people and its natural resources. The well-being of our nation depends upon the wise use of those resources. They provide our basic requirements -- food, clothing and shelter. There is ample evidence that a very large portion of all teachers recognize the need for conservation and the importance of environmental education. Leading educators say that teachers realize the why of conservation but need help with the what, when, where and how -- how to teach the topic so that it hooks onto the personal lives of their students and is translated into behavior -- how to bring conservation home to all pupils in terms of day-to-day living.

83

Outdoor Outfitter Gets Greener With Solar Water Heater | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Outdoor Outfitter Gets Greener With Solar Water Heater Outdoor Outfitter Gets Greener With Solar Water Heater Outdoor Outfitter Gets Greener With Solar Water Heater October 8, 2010 - 12:51pm Addthis L.L. Bean’s flagship store sees nearly 3 million visitors each year. The store now uses solar-heated water for showers, restrooms and two cafes. | Photo courtesy of L.L. Bean | L.L. Bean's flagship store sees nearly 3 million visitors each year. The store now uses solar-heated water for showers, restrooms and two cafes. | Photo courtesy of L.L. Bean | Lindsay Gsell L.L. Bean is known for its outdoor apparel- jackets, backpacks and cozy winter sweaters. However, the company does more than just dress for the outdoors, it also works to protect and preserve it. For nearly 100 years, L.L. Bean has been committed to environmental conservation and

84

Transient Response of Cadmium Telluride Modules to Light Exposure: Preprint  

DOE Green Energy (OSTI)

Commercial cadmium telluride (CdTe) photovoltaic (PV) modules from three different manufacturers were monitored for performance changes during indoor and outdoor light-exposure. Short-term transients in Voc were recorded on some modules, with characteristic times of ~1.1 hours. Outdoor performance data shows a similar drop in Voc after early morning light exposure. Preliminary analysis of FF changes show light-induced changes on multiple time scales, including a long time scale.

Deline, C.; del Cueto, J.; Albin, D. S.; Petersen, C.; Tyler, L.; TamizhMani, G.

2011-07-01T23:59:59.000Z

85

Electric Utility Industrial DSM and M&V Program  

E-Print Network (OSTI)

BC Hydro is an electric utility with a service area covering over 95% of the province of British Columbia in Canada. Power Smart is BC Hydros demand-side-management (DSM) division. Power Smart develops, operates and manages various DSM programs for residential, commercial and industrial customers. The Power Smart Partners Program (PSP) is the premier demand-side management program for BC Hydros large commercial and industrial non-transmission class customers. It is a direct energy acquisition program that is based on a partnering approach with BC Hydros business customers. A customer that commits to being a Power Smart Partner gains access to financial support and assistance with the identification and implementation of electricity savings projects. A direct financial incentive is provided to lower customers funding requirements and to improve the payback and/or investment criteria for energy efficiency projects. Projects are evaluated against established criteria set forth by BC Hydro. Projects which prove to be the most cost-effective on a $/kWh basis receive funds. For transmission-voltage customers, BC Hydro has recently implemented a new tariff designed to encourage energy reduction. The new tariff is an inclining block tariff and is known as the Stepped Rate. The customers consumption is compared against their Customer Baseline Load (CBL). The first 90% of the customers consumption is billed at a Tier 1 rate. The remaining consumption is billed at a Tier 2 rate, approximately two times the Tier 1 rate. There are mechanisms in place to adjust the customers CBL to account for activities such as customer-funded demand-side-management projects and customer plant expansion projects. This paper will discuss BC Hydros M&V program in terms of the process, operations and M&V results to date for the PSP. In addition, the paper will discuss the new Stepped Rate tariff intricacies in terms of CBL setting, CBL adjustments and transmission customer Impact Study guideline requirements.

Lau, K. P. K.

2008-01-01T23:59:59.000Z

86

Predictive clothing insulation model based on outdoor air and indoor operative temperatures  

E-Print Network (OSTI)

2012) Predictive clothing insulation model based on outdoorPredictive clothing insulation model based on outdoor airpredictive models of clothing insulation have been developed

Schiavon, Stefano; Lee, Kwang Ho

2012-01-01T23:59:59.000Z

87

Comparing Light Emitting Diode (LED) Street and Area Lighting to Traditional Lighting Technologies  

Science Conference Proceedings (OSTI)

High-power light-emitting diode (LED) technology holds great promise for outdoor illumination. This case study discusses the results of the LED Street and Area Lighting Demonstration performed by Tennessee Valley Authority (TVA), Knoxville Utilities Board (KUB), and EPRI. Data was collected on Wall Avenue, a busy thoroughfare in downtown Knoxville, using a specially developed computer-controlled mobile light measurement vehicle with a global positioning system.Early reports from the ...

2012-09-28T23:59:59.000Z

88

Solar lighting | Open Energy Information  

Open Energy Info (EERE)

lighting lighting Jump to: navigation, search Introductory Facts About Solar Lights It is not just a normal light bulb.The solar light consists of a LED or Light Emitting Diode, which draw little power. Coupled with constantly recharging batteries, you will never run out of light! They will save the customer money. By Replacing all outdoor lighting with solar lights there is no need to plug in to the electrical system. The lights will automatically turn on at dusk and will be charged during the day. They help out the environment.Not only does not plugging in to the power system save money but also energy, therefore protecting the Earth. Easy to Install No wires necessary, just pop in the battery. They come in all designs Just because they are solar lights doesn't

89

Minimizing Variation in Outdoor CPV Power Ratings (Presentation)  

SciTech Connect

Presented at the 7th International Conference on Concentrating Photovoltaic Systems (CPV-7), 4-6 April 2011, Las Vegas, Nevada. The CPV community has agreed to have both indoor and outdoor power ratings at the module level. The indoor rating provides a repeatable measure of module performance as it leaves the factory line while the outdoor rating provides a measure of true performance under real world conditions. The challenge with an outdoor rating is that the spectrum, temperature, wind speed, etc are constantly in flux and therefore the resulting power rating varies from day to day and month to month. This work examines different methodologies for determining the outdoor power rating with the goal of minimizing variation even if data are collected under changing meteorological conditions.

Muller, M.

2011-04-01T23:59:59.000Z

90

Browse wiki | Open Energy Information  

Open Energy Info (EERE)

or a local government or any of their agencies. Applicable only to outdoor lighting ballast-operated vapor lamp fixtures, either mercury vapor (MV), high pressure sodium (HPS)...

91

Data:54991866-36b9-43eb-8f61-1ee2446254f1 | Open Energy Information  

Open Energy Info (EERE)

or a local government or any of their agencies. Applicable only to outdoor lighting ballast-operated vapor lamp fixtures, either mercury vapor (MV), high pressure sodium (HPS)...

92

Data:548ab109-bb95-4b9c-82f8-984a1dd171fa | Open Energy Information  

Open Energy Info (EERE)

or a local government or any of their agencies. Applicable only to outdoor lighting ballast-operated vapor lamp fixtures, either mercury vapor (MV), high pressure sodium (HPS)...

93

Data:1168228a-4e41-4952-8201-ba7ab2f08aff | Open Energy Information  

Open Energy Info (EERE)

or a local government or any of their agencies. Applicable only to outdoor lighting ballast-operated vapor lamp fixtures, either mercury vapor (MV), high pressure sodium (HPS)...

94

Data:0e129a41-6138-400e-be60-7742cbe9ab2b | Open Energy Information  

Open Energy Info (EERE)

or a local government or any of their agencies. Applicable only to outdoor lighting ballast-operated vapor lamp fixtures, either mercury vapor (MV), high pressure sodium (HPS)...

95

Data:2aaaf198-bc2b-4f93-b24e-08832c8dabeb | Open Energy Information  

Open Energy Info (EERE)

or a local government or any of their agencies. Applicable only to outdoor lighting ballast-operated vapor lamp fixtures, either mercury vapor (MV), high pressure sodium (HPS)...

96

Data:0a6c2e98-8dea-4cae-866f-00ab1c7eebca | Open Energy Information  

Open Energy Info (EERE)

or a local government or any of their agencies. Applicable only to outdoor lighting ballast-operated vapor lamp fixtures, either mercury vapor (MV), high pressure sodium (HPS)...

97

Data:61e088da-48b3-4281-bdce-f853b04f1158 | Open Energy Information  

Open Energy Info (EERE)

or a local government or any of their agencies. Applicable only to outdoor lighting ballast-operated vapor lamp fixtures, either mercury vapor (MV), high pressure sodium (HPS)...

98

Data:8e0f826a-f18e-4268-9546-bbfba87ef44e | Open Energy Information  

Open Energy Info (EERE)

or a local government or any of their agencies. Applicable only to outdoor lighting ballast-operated vapor lamp fixtures, either mercury vapor (MV), high pressure sodium (HPS)...

99

Data:889ea768-5e4c-4971-9181-82a9bbad721a | Open Energy Information  

Open Energy Info (EERE)

or a local government or any of their agencies. Applicable only to outdoor lighting ballast-operated vapor lamp fixtures, either mercury vapor (MV), high pressure sodium (HPS)...

100

Data:626f5c89-8472-46ef-9820-ed97fcd4b993 | Open Energy Information  

Open Energy Info (EERE)

or a local government or any of their agencies. Applicable only to outdoor lighting ballast-operated vapor lamp fixtures, either mercury vapor (MV), high pressure sodium (HPS)...

Note: This page contains sample records for the topic "outdoor lighting mv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Data:130e1e71-8f88-46ee-a6b3-08b8a8a3baef | Open Energy Information  

Open Energy Info (EERE)

or a local government or any of their agencies. Applicable only to outdoor lighting ballast-operated vapor lamp fixtures, either mercury vapor (MV), high pressure sodium (HPS)...

102

Data:4eaf1cf2-f582-4075-b384-7cc106820b25 | Open Energy Information  

Open Energy Info (EERE)

or a local government or any of their agencies. Applicable only to outdoor lighting ballast-operated vapor lamp fixtures, either mercury vapor (MV), high pressure sodium (HPS)...

103

Data:5e86a75d-90dd-42c6-89a3-7b0bb24b1a10 | Open Energy Information  

Open Energy Info (EERE)

or a local government or any of their agencies. Applicable only to outdoor lighting ballast-operated vapor lamp fixtures, either mercury vapor (MV), high pressure sodium (HPS)...

104

Data:3ec3603d-e52f-446b-b5cf-43b6fbc63a62 | Open Energy Information  

Open Energy Info (EERE)

or a local government or any of their agencies. Applicable only to outdoor lighting ballast-operated vapor lamp fixtures, either mercury vapor (MV), high pressure sodium (HPS)...

105

Data:221de333-3873-4734-b181-c11216c90a85 | Open Energy Information  

Open Energy Info (EERE)

or a local government or any of their agencies. Applicable only to outdoor lighting ballast-operated vapor lamp fixtures, either mercury vapor (MV), high pressure sodium (HPS)...

106

Data:952570ab-ec99-45bf-8577-d5592104c307 | Open Energy Information  

Open Energy Info (EERE)

or a local government or any of their agencies. Applicable only to outdoor lighting ballast-operated vapor lamp fixtures, either mercury vapor (MV), high pressure sodium (HPS)...

107

Data:348ad73a-6234-4eef-bcf9-e533ff0d9c66 | Open Energy Information  

Open Energy Info (EERE)

or a local government or any of their agencies. Applicable only to outdoor lighting ballast-operated vapor lamp fixtures, either mercury vapor (MV), high pressure sodium (HPS)...

108

New River Light & Power Co | Open Energy Information  

Open Energy Info (EERE)

New River Light & Power Co New River Light & Power Co Place North Carolina Utility Id 13482 Utility Location Yes Ownership S NERC Location SERC NERC SERC Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png 100 Watt SV TOB Lighting 150 Watt SV TOB Lighting 150 Watt Sodium Vapor Lighting 175 Watt MV TOB Lighting 175 Watt Mercury Vapor Lighting 250 Watt Metal Halide Lighting 250 Watt SV TOB Lighting 250 Watt Sodium Vapor Lighting 400 Watt MV TOB Lighting 400 Watt Mercury Vapor Lighting 400 Watt Metal Halide Lighting 400 Watt SV TOB Lighting 750 Watt SV TOB Lighting

109

City of Muscle Shoals, Alabama (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

Shoals, Alabama (Utility Company) Shoals, Alabama (Utility Company) Jump to: navigation, search Name City of Muscle Shoals Place Alabama Utility Id 13144 Utility Location Yes Ownership M NERC Location SERC NERC SERC Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Athletic Lighting (LS) Commercial Drainage Pump Station (DPS) Commercial GSA 3 Commercial GSA-1 Commercial GSA-2 Commercial Outdoor Lighting (100 HPS) Lighting Outdoor Lighting (1000 MV) Lighting Outdoor Lighting (175 MV) Lighting Outdoor Lighting (250 HPS) Lighting Outdoor Lighting (400 HPS) Lighting Outdoor Lighting (400 MV) Lighting

110

Construction of MV-6 Well Pad at the Central Nevada Test Area Completed |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Construction of MV-6 Well Pad at the Central Nevada Test Area Construction of MV-6 Well Pad at the Central Nevada Test Area Completed Construction of MV-6 Well Pad at the Central Nevada Test Area Completed October 22, 2013 - 6:10pm Addthis What does this project do? Goal 1. Protect human health and the environment A new groundwater monitoring/validation (MV) well was installed at the Central Nevada Test Area (CNTA) in September 2013. LM proposed this well to the Nevada Division of Environmental Protection (NDEP) to enhance the existing monitoring network and to expedite the Federal Facility Agreement and Consent Order (FFACO) closure process for the CNTA Subsurface Corrective Action Unit. CNTA is located in Hot Creek Valley in Nye County, Nevada, adjacent to U.S. Highway 6, about 30 miles north of Warm Springs, Nevada. CNTA was the site of "Project Faultless," a test site where a

111

Construction of MV-6 Well Pad at the Central Nevada Test Area Completed |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Construction of MV-6 Well Pad at the Central Nevada Test Area Construction of MV-6 Well Pad at the Central Nevada Test Area Completed Construction of MV-6 Well Pad at the Central Nevada Test Area Completed October 22, 2013 - 6:10pm Addthis What does this project do? Goal 1. Protect human health and the environment A new groundwater monitoring/validation (MV) well was installed at the Central Nevada Test Area (CNTA) in September 2013. LM proposed this well to the Nevada Division of Environmental Protection (NDEP) to enhance the existing monitoring network and to expedite the Federal Facility Agreement and Consent Order (FFACO) closure process for the CNTA Subsurface Corrective Action Unit. CNTA is located in Hot Creek Valley in Nye County, Nevada, adjacent to U.S. Highway 6, about 30 miles north of Warm Springs, Nevada. CNTA was the site of "Project Faultless," a test site where a

112

Spark protected ion source control and monitoring system at 1. 5 MV  

SciTech Connect

The Heavy Ion Fusion Program at Argonne National Laboratory utilizes a 1.5 Mv Xe ion preaccelerator. Reliable beam transport requires accurate measurements and precise control of various ion source parameters. A discussion is presented of the use of a multiplexed fiber optic data transmission system and low cost digital stepper motors for control functions. Techniques are discussed which allow TTL and CMOS semiconductor circuits to survive the destructive sparks which can occur in the 1.5 Mv preaccelerator. 5 refs.

Bogaty, J.M.; Zolecki, R.

1981-06-01T23:59:59.000Z

113

Chariton Valley Elec Coop, Inc | Open Energy Information  

Open Energy Info (EERE)

Valley Elec Coop, Inc Valley Elec Coop, Inc Jump to: navigation, search Name Chariton Valley Elec Coop, Inc Place Iowa Utility Id 3314 Utility Location Yes Ownership C NERC Location SERC NERC SERC Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Outdoor Lighting Metered HPS 100 W Lighting Outdoor Lighting Metered HPS 150 W Lighting Outdoor Lighting Metered HPS 250 W Lighting Outdoor Lighting Metered MV 175 W Lighting Outdoor Lighting Metered MV 400 W Lighting Outdoor Lighting Unmetered HPS 100 W Lighting Outdoor Lighting Unmetered HPS 100 W New Pole Lighting

114

Black River Electric Coop | Open Energy Information  

Open Energy Info (EERE)

Coop Coop Jump to: navigation, search Name Black River Electric Coop Place Missouri Utility Id 1775 Utility Location Yes Ownership C NERC Location SERC NERC SERC Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Outdoor Lighting MV 175 W Lighting Outdoor Lighting MV 250 W Lighting Outdoor Lighting MV 400 W Lighting Outdoor Lighting SLV 400 W Direct Lighting Outdoor Lighting SLV 400 W Flood Lighting Outdoor Lighting SVL 100 W Lighting Residential Residential Single Phase General Service Commercial Standard Single-Phase Commercial/Industrial Service Industrial

115

Information Resources: Pedestrian-Friendly Nighttime Lighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Pedestrian-Friendly Nighttime Lighting Pedestrian-Friendly Nighttime Lighting This November 19, 2013 webinar presented issues and considerations related to pedestrian-friendly nighttime lighting, such as color rendering, safety, and adaptation. When it comes to outdoor lighting, the industry has understandably focused on footcandles and uniformity, efficacy, pole spacing, and cutoff-but those are not the chief criteria for all neighborhoods. Presenter Naomi Miller of Pacific Northwest National Laboratory discussed the types of communities and spaces that should consider pedestrian-friendly outdoor lighting, what pedestrian-friendly lighting looks like, the basic principles of glare control, color and visibility, and metrics. View the presentation slides View the text-alternative version

116

Assessing Sheltering-In-Place Responses to Outdoor Toxic Releases  

NLE Websites -- All DOE Office Websites (Extended Search)

Assessing Sheltering-In-Place Responses to Outdoor Toxic Releases Assessing Sheltering-In-Place Responses to Outdoor Toxic Releases Title Assessing Sheltering-In-Place Responses to Outdoor Toxic Releases Publication Type Conference Proceedings Year of Publication 2005 Authors Sohn, Michael D., Richard G. Sextro, and David M. Lorenzetti Conference Name 10th International Conference on Indoor Air Quality and Climate - Indoor Air 2005 Volume 2(6) Pagination 1792-1796 Date Published Sept. 4-9, 2005 Publisher Tsinghua University Press Conference Location Beijing, China Keywords airflow and pollutant transport group, airflow modeling, comis, countermeasures to chemical and biological threats, emergency response, exposure, indoor environment department, shelter-in-place Abstract An accidental or intentional outdoor release of pollutants can produce a hazardous plume, potentially contaminating large portions of a metropolitan area as it disperses downwind. To minimize health consequences on the populace, government and research organizations often recommend sheltering in place when evacuation is impractical. Some reports also recommend "hardening" an indoor shelter, for example by applying duct tape to prevent leakage into a bathroom. However, few studies have quantified the perceived beneficial effects of sheltering and hardening, or examined the limits of their applicability. In this paper, we examine how sheltering and hardening might reduce exposure levels under different building and meteorological conditions (e.g., wind direction). We predict concentrations and exposure levels for several conditions, and discuss the net benefits from several sheltering and hardening options

117

Trio: enabling sustainable and scalable outdoor wireless sensor network deployments  

Science Conference Proceedings (OSTI)

We present the philosophy, design, and initial evaluation of the Trio Testbed, a new outdoor sensor network deployment that consists of 557 solar-powered motes, seven gateway nodes, and a root server. The testbed covers an area of approximately 50,000 ... Keywords: detection, large-scale, long-life, sensor networks, surveillance, target tracking, testbed

Prabal Dutta; Jonathan Hui; Jaein Jeong; Sukun Kim; Cory Sharp; Jay Taneja; Gilman Tolle; Kamin Whitehouse; David Culler

2006-04-01T23:59:59.000Z

118

Long Term Outdoor Testing of Low Concentration Solar Modules  

Science Conference Proceedings (OSTI)

A 1?axis carousel tracker equipped with four 3?sun low?concentration mirror modules has now been under test outdoors at the University of Nevada in Las Vegas (UNLV) for three years. There are three unique features associated with this unit. First

Lewis Fraas; James Avery; Leonid Minkin; H. X. Huang; Tim Hebrink; Rik Hurt; Robert Boehm

2011-01-01T23:59:59.000Z

119

Improving data fusion in personal positioning systems for outdoor environments  

Science Conference Proceedings (OSTI)

A fault detection and correction methodology for personal positioning systems for outdoor environments is presented. We demonstrate its successful use in a system consisting of a global positioning system receiver and an inertial measurement unit. Localization ... Keywords: Adaptive Kalman filtering, Causal diagnosis, Chi-square test, Dead reckoning, Fault detection, Pedestrian positioning

E. Pulido Herrera; H. Kaufmann; J. Secue; R. QuirS; G. Fabregat

2013-01-01T23:59:59.000Z

120

LIGHT EMITTING DlODE TESTING AND ANALYSIS  

SciTech Connect

This report covers the work done to analyze the optical output of a Light Emitting Diode. This diode consists' of a Monsanto MV2 LED chip in an MV50 package. A calculator based instrumentation system is described including programming techniques used to reduce and display data. A Light Instrumentation System with specially designed fiber optic cables is described which gathers data for processing by the calculator based instrumentation system. Future work will include analysis of the RCA 8571 Photomultiplier Tube.

Bowers, J L; Allen, T E

1973-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "outdoor lighting mv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Socioeconomic and Outdoor Meteorological Determinants of Indoor Temperature and Humidity in New York City Dwellings  

Science Conference Proceedings (OSTI)

Numerous mechanisms link outdoor weather and climate conditions to human health. It is likely that many health conditions are more directly affected by indoor rather than outdoor conditions. Yet, the relationship between indoor temperature and ...

J. D. Tamerius; M. S. Perzanowski; L. M. Acosta; J. S. Jacobson; I. F. Goldstein; J. W. Quinn; A. G. Rundle; J. Shaman

2013-04-01T23:59:59.000Z

122

DOE Science Showcase - Light-emitting Diode (LED) Lighting Research | OSTI,  

Office of Scientific and Technical Information (OSTI)

Science Showcase - Light-emitting Diode (LED) Lighting Research Science Showcase - Light-emitting Diode (LED) Lighting Research Light-emitting diode (LED) lighting is a type of solid-state lighting that uses a semiconductor to convert electricity to light. LED lighting products are beginning to appear in a wide variety of home, business, and industrial products such as holiday lighting, replacement bulbs for incandescent lamps, street lighting, outdoor area lighting and indoor ambient lighting. Over the past decade, LED technology research and development supported by the U.S. Department of Energy (DOE) has yielded impressive improvements in the cost, color performance, light output, efficacy, reliability, lifetime, and manufacturability of LED products and this upward trend is expected to continue. Read about the latest DOE research, the technology behind LEDs,

123

Objective Method for Selecting Outdoor Reporting Conditions for Photovoltaic Performance  

DOE Green Energy (OSTI)

Outdoor performance of photovoltaic modules and systems depends on prevailing conditions at the time of measurement. Outdoor test conditions must be relevant to device performance and readily attainable. Flat-plate, nonconcentrator PV device performance is reported with respect to fixed conditions referred to as Standard Reporting Conditions (SRC) of 1 kW/m{sup 2} plane of array total irradiance, 25 C device temperature, and a reference spectral distribution at air mass 1.5 under certain atmospheric conditions. We report a method of analyzing historical meteorological and irradiance data to determine the range of outdoor environmental parameters and solar irradiance components that affect solar collector performance when the SRC 1 kW/m{sup 2} total irradiance value occurs outdoors. We used data from the 30 year U.S. National Solar Radiation Data Base (NSRDB) , restricting irradiance conditions to within +/- 25 W/m{sup 2} of 1 kW/m{sup 2} on a solar tracking flat-plate collector. The distributions of environmental parameter values under these conditions are non-Gaussian and site dependent. Therefore the median, as opposed to the mean, of the observed distributions is chosen to represent appropriate outdoor reporting conditions. We found the average medians for the direct beam component (834 W/m{sup 2}), ambient temperature (24.4 C), total column water vapor (1.4 cm), and air mass (1.43) are near commonly used SRC values. Average median wind speed (4.4 m/s) and broadband aerosol optical depth (0.08) were significantly different from commonly used values.

Myers, D. R.; Kurtz, S. (National Renewable Energy Laboratory); Whitaker, C.; Townsend, T. (Endecon Engineering: San Ramon, California); Maish, A. (Sandia National Laboratories: Albuquerque, New Mexico)

1999-02-25T23:59:59.000Z

124

Real-Time Measurement of Rates of Outdoor Airflow into HVAC Systems: A Field Study of Three Technologies  

E-Print Network (OSTI)

to determine flow resistance of HVAC ducts and fittings.W. 2003. Outdoor airflow into HVAC systems: an evaluation ofof outdoor airflow into HVAC systems. Lawrence Berkeley

Fisk, William J.; Sullivan, Douglas P.; Faulkner, David

2005-01-01T23:59:59.000Z

125

National Parks Move Transportation Forward in America's Great Outdoors |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Parks Move Transportation Forward in America's Great Parks Move Transportation Forward in America's Great Outdoors National Parks Move Transportation Forward in America's Great Outdoors March 28, 2013 - 3:00pm Addthis Together, the five newest National Parks Initiative projects will save the equivalent of nearly 10,000 gallons of gasoline and 71 tons of greenhouse gas emissions per year. | Infographic by Sarah Gerrity, Energy Department. Together, the five newest National Parks Initiative projects will save the equivalent of nearly 10,000 gallons of gasoline and 71 tons of greenhouse gas emissions per year. | Infographic by Sarah Gerrity, Energy Department. Shannon Brescher Shea Communications Manager, Clean Cities Program What are the key facts? The five new National Parks Initiative projects will save the

126

Health Relevant Outdoor Air Change Rates in Homes  

NLE Websites -- All DOE Office Websites (Extended Search)

Health Relevant Outdoor Air Change Rates in Homes Health Relevant Outdoor Air Change Rates in Homes Speaker(s): Jan Sundell Date: February 6, 2003 - 12:00pm Location: Bldg. 90 The Damp Building and Health (DBH) study started as a cross-sectional questionnaire study of all 14000 children, 1-6 years of age in Värmland, Sweden. The response rate on the questionnaire (year 2001) was 79%, meaning that basic data exists on almost 12,000 children and their homes. In a second step a case-control study on 200 sick (wheezing, asthma, excema), and 200 healthy children, extensive measurements in the home, as well as clinical examinations of the children has been conducted during 2002. Ventilation has been measured with a passive tracer gas method during one week. The results will be presented in this seminar-- seemingly sick

127

Indoor-outdoor air leakage of apartments and commercial buildings.  

NLE Websites -- All DOE Office Websites (Extended Search)

Indoor-outdoor air leakage of apartments and commercial buildings. Indoor-outdoor air leakage of apartments and commercial buildings. Title Indoor-outdoor air leakage of apartments and commercial buildings. Publication Type Report Year of Publication 2006 Authors Price, Phillip N., Arman Shehabi, Wanyu R. Chan, and Ashok J. Gadgil Publisher Lawrence Berkeley National Laboratory Abstract We compiled and analyzed available data concerning indoor-outdoor air leakage rates and building leakiness parameters for commercial buildings and apartments. We analyzed the data, and reviewed the related literature, to determine the current state of knowledge of the statistical distribution of air exchange rates and related parameters for California buildings, and to identify significant gaps in the current knowledge and data. Very few data were found from California buildings, so we compiled data from other states and some other countries. Even when data from other developed countries were included, data were sparse and few conclusive statements were possible. Little systematic variation in building leakage with construction type, building activity type, height, size, or location within the u.s. was observed. Commercial buildings and apartments seem to be about twice as leaky as single-family houses, per unit of building envelope area. Although further work collecting and analyzing leakage data might be useful, we suggest that a more important issue may be the transport of pollutants between units in apartments and mixed-use buildings, an under-studied phenomenon that may expose occupants to high levels of pollutants such as tobacco smoke or dry cleaning fumes.

128

Outdoor airflow into HVAC systems: An evaluation of measurement  

NLE Websites -- All DOE Office Websites (Extended Search)

Outdoor airflow into HVAC systems: An evaluation of measurement Outdoor airflow into HVAC systems: An evaluation of measurement technologies Title Outdoor airflow into HVAC systems: An evaluation of measurement technologies Publication Type Report LBNL Report Number LBNL-53834 Year of Publication 2003 Authors Fisk, William J., David Faulkner, Douglas P. Sullivan, and William W. Delp Abstract During the last few years, new technologies have been introduced for measuring the flow rates of outdoor air (OA) into HVAC systems; however, an evaluation of these measurement technologies has not previously been published. This document describes a test system and protocols developed for controlled evaluation of these measurement technologies. The results of tests of three measurement technologies are also summarized. The test system and protocol were judged practical and very useful. The test results indicate that one measurement technology can measure OA flow rates with errors of 20% or less without a field-based calibration, as long as the OA velocities are sufficient to provide an accurately measurable pressure signal. The test results for a second measurement technology are similar; however, a difficult field-based calibration relating the OA flow rate with the pressure signal would be required to reduce errors below approximately 30%. The errors in OA flow rates measured with the third measurement technology, that uses six electronic airspeed sensors downstream of the OA inlet louver, exceeded 100%; however, these errors could be substantially reduced through a difficult field based calibration. The effects of wind on the accuracy of these measurement technologies still needs to be evaluated

129

Minimizing Variation in Outdoor CPV Power Ratings (Presentation)  

DOE Green Energy (OSTI)

Module data from NREL's CPV test bed is used to examine methods for calculating outdoor CPV power ratings. IEC 62670 and ASTM E2527 are used as a starting point for determining a module power rating on a monthly basis. Monthly power ratings vary by more than desired using existing methods. The presentation examines modifications to existing methods as well as spectral corrections to reduce variation in monthly module power ratings.

Muller, M.

2011-02-01T23:59:59.000Z

130

Achievement of 35 MV/m in the Superconducting Nine-Cell Cavities for TESLA 1  

E-Print Network (OSTI)

Achievement of 35 MV/m in the Superconducting Nine-Cell Cavities for TESLA 1 L. Lilje2 , D. Kostin Electronvolt Superconducting Linear Accelerator TESLA is the only linear electron-positron collider project reliably achieved in the cavities of the TESLA Test Facility (TTF) accelerator. The upgrade of TESLA to 800

131

LED Lighting Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

LED Lighting Basics LED Lighting Basics LED Lighting Basics August 16, 2013 - 10:07am Addthis Light-emitting diodes (LEDs) are light sources that differ from more traditional sources of light in that they are semiconductor devices that produce light when an electrical current is applied. Applying electrical current causes electrons to flow from the positive side of a diode to the negative side. Then, at the positive/negative junction of the diode, the electrons slow down to orbit at a lower energy level. The electrons emit the excess energy as photons of light. LEDs are often used as small indicator lights on various electronic devices. Because of their long life, durability, and efficiency, LEDs are becoming more common in residential, commercial, and outdoor area lighting

132

Exploring relationships between outdoor air particulate-associated  

NLE Websites -- All DOE Office Websites (Extended Search)

Exploring relationships between outdoor air particulate-associated Exploring relationships between outdoor air particulate-associated polycyclic aromatic hydrocarbon and PM2.5: A case study of benzo(a)pyrene in California metropolitan regions Title Exploring relationships between outdoor air particulate-associated polycyclic aromatic hydrocarbon and PM2.5: A case study of benzo(a)pyrene in California metropolitan regions Publication Type Journal Article LBNL Report Number LBNL-514E Year of Publication 2008 Authors Lobscheid, Agnes B., Thomas E. McKone, and D. A. Valleroc Journal Atmospheric Environment Volume 41 Start Page Chapter Pagination 5659-5672 Abstract Polycyclic aromatic hydrocarbons (PAHs) and particulate matter (PM) are co-pollutants emitted as by-products of combustion processes. Convincing evidence exists for PAHs as a primary toxic component of fine PM (PM2.5). Because PM2.5 is listed by the US EPA as a "Criteria Pollutant," it is monitored regularly at sites nationwide. In contrast, very limited data is available on measured ambient air concentrations of PAHs. However, between 1999-2001, ambient air concentrations of PM2.5 and benzo(a)pyrene (BaP) are available for California locations. We use multivariate linear regression models (MLRMs) to predict ambient air levels of BaP in four air basins based on reported PM2.5 concentrations and spatial, temporal and meteorological variables as variates. We obtain an R2 ranging from 0.57-0.72 among these basins. Significant variables (p<0.05) include the average daily PM2.5 concentration, wind speed, temperature and relative humidity, and the coastal distance as well as season, and holiday or weekend. Combining the data from all sites and using only these variables to estimate ambient BaP levels, we obtain an R2 of 0.55. These R2-values, combined with analysis of the residual error and cross validation using the PRESS-statistic, demonstrate the potential of our method to estimate reported outdoor air PAH exposure levels in metropolitan regions. These MLRMs provide a first step towards relating outdoor ambient PM2.5 and PAH concentrations for epidemiological studies when PAH measurements are unavailable, or limited in spatial coverage, based on publicly available meteorological and PM2.5 data

133

Orcas Power & Light Coop | Open Energy Information  

Open Energy Info (EERE)

Orcas Power & Light Coop Orcas Power & Light Coop Jump to: navigation, search Name Orcas Power & Light Coop Place Washington Utility Id 14170 Utility Location Yes Ownership C NERC Location WECC NERC WECC Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png TARIFF CS-12 COMMERCIAL SERVICE Industrial TARIFF LR-12 LINE RETENTION Commercial TARIFF M-12 MARINA SERVICE Commercial TARIFF NM-12 UNMETERED SERVICE Commercial TARIFF P-12 PUMP SERVICE Industrial TARIFF POL-12 PRIVATE OUTDOOR LIGHTING 100 Watts Lighting TARIFF POL-12 PRIVATE OUTDOOR LIGHTING 200 Watts Lighting

134

Town of Murphy, North Carolina (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

Town of Town of Place North Carolina Utility Id 40441 Utility Location Yes Ownership M NERC Location SERC NERC SERC Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png General Service 0-50 kW Commercial General Service 51-1000 kW Commercial General Service Over 1000 kW Commercial Outdoor Lighting- 100 W HPS Lighting Outdoor Lighting- 1000 W MHL Lighting Outdoor Lighting- 175 W MV Lighting Outdoor Lighting- 200 W HPS Lighting Outdoor Lighting- 250 W HPS Lighting Outdoor Lighting- 400 W MV Lighting Residential Rate Residential Water Pumps Commercial

135

Flint Electric Membership Corp | Open Energy Information  

Open Energy Info (EERE)

Flint Electric Membership Corp Flint Electric Membership Corp Place Georgia Utility Id 6411 Utility Location Yes Ownership C NERC Location SERC NERC SERC Yes Activity Distribution Yes Alt Fuel Vehicle Yes Alt Fuel Vehicle2 Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Outdoor Lighting GOS Cobrahead HPS 150 W Lighting Outdoor Lighting GOS Cobrahead HPS 250 W Lighting Outdoor Lighting GOS Cobrahead HPS 400 W Lighting Outdoor Lighting GOS Cobrahead/ Interstate MV 400 W Lighting Outdoor Lighting GOS Cobrahead/ Open Bottom MV 174 W Lighting Outdoor Lighting GOS Cobrahead/Open Bottom HPS 100 W Lighting

136

Village of Penn Yan, New York (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

Yan, New York (Utility Company) Yan, New York (Utility Company) Jump to: navigation, search Name Village of Penn Yan Place New York Utility Id 14700 Utility Location Yes Ownership M NERC Location NPCC NERC NPCC Yes ISO NY Yes Activity Distribution Yes Activity Bundled Services Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Industrial Rate Industrial Public Street Lighting Lighting Residential (per meter, per month) Residential Security Outdoor Lighting (175W MV/HPS) Lighting Security Outdoor Lighting (250W MV/HPS) Lighting Security Outdoor Lighting (400W MV/HPS) Lighting Security Outdoor Lighting(1000W MV/HPS) Lighting

137

Outdoor polymeric insulators long-term exposed to HVDC  

SciTech Connect

Field experience from outdoor polymeric insulators exposed to HVDC under natural contamination conditions is presented. This paper summarizes the peak leakage current statistics, the hydrophobicity and the surface material conditions studied by electron spectroscopy for chemical analysis (ESCA) and attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy. The results show a strong interrelation between the surface conditions and the performance with respect to leakage currents. Moreover, the results show that the surface conditions and the performance of the insulators exposed to HVDC are rather similar to those of the insulators exposed to HVAC.

Soerqvist, T.; Vlastos, A.E. [Chalmers Univ. of Technology, Gothenburg (Sweden)

1997-04-01T23:59:59.000Z

138

Outdoor unit construction for an electric heat pump  

DOE Patents (OSTI)

The outdoor unit for an electric heat pump is provided with an upper portion 10 containing propeller fan means 14 for drawing air through the lower portion 12 containing refrigerant coil means 16 in the form of four discrete coils connected together in a subassembly forming a W shape, the unit being provided with four adjustable legs 64 which are retracted in shipment, and are adjusted on site to elevate the unit to a particular height suitable for the particular location in which the unit is installed.

Draper, Robert (Pittsburgh, PA); Lackey, Robert S. (Pittsburgh, PA)

1984-01-01T23:59:59.000Z

139

Outdoor unit construction for an electric heat pump  

DOE Patents (OSTI)

The outdoor unit for an electric heat pump is provided with an upper portion containing propeller fan means for drawing air through the lower portion containing refrigerant coil means in the form of four discrete coils connected together in a subassembly forming a W shape, the unit being provided with four adjustable legs which are retracted in shipment, and are adjusted on site to elevate the unit to a particular height suitable for the particular location in which the unit is installed. 4 figs.

Draper, R.; Lackey, R.S.

1984-09-11T23:59:59.000Z

140

An outdoor exposure testing program for optical materials used in solar thermal electric technologies  

DOE Green Energy (OSTI)

Developing low-cost, durable advanced optical materials is important for making solar thermal energy. technologies viable for electricity production. The objectives of a new outdoor testing program recently initiated by the National Renewable Energy Laboratory (NREL) are to determine the expected lifetimes of candidate reflector materials and demonstrate their optical durability in real-world service conditions. NREL is working with both utilities and industry in a collaborative effort to achieve these objectives. To date, simulated/accelerated exposure testing of these materials has not been correlated with actual outdoor exposure testing. Such a correlation is desirable to provide confidence in lifetime predictions based upon accelerated weathering results. This outdoor testing program will allow outdoor exposure data to be obtained for realistic environments and will establish a data base for correlating simulated/accelerated outdoor exposure data with actual outdoor exposure data. In this program, candidate reflector materials are subjected to various outdoor exposure conditions in a network of sites across the southwestern United States. Important meteorological data are continuously recorded at these sites; these data will be analyzed for possible correlations with material optical performance. Weathered samples are characterized on a regular basis using a series of optical tests. These tests provide the basis for tracking material performance and durability with exposure time in the various outdoor environments. This paper describes the outdoor testing program in more detail including meteorological monitoring capabilities and the optical tests that are performed on these materials.

Wendelin, T.; Jorgensen, G.

1994-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "outdoor lighting mv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Dynamic predictive clothing insulation models based on outdoor air and indoor operative temperatures  

E-Print Network (OSTI)

predictive clothing insulation models based on outdoor airrange of the clothing insulation calculated for eachbuilding). Figure 8 Clothing insulation versus dress code [

Schiavon, Stefano; Lee, Kwang Ho

2012-01-01T23:59:59.000Z

142

Village of Deshler, Ohio (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

Deshler Deshler Place Ohio Utility Id 5096 Utility Location Yes Ownership M NERC Location RFC NERC RFC Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Commercial General Service (Single Phase) Commercial Commercial General Service (Three Phase) Commercial Industrial Large Power Service Industrial Outdoor Security Lighting (100 HPS) Commercial Outdoor Security Lighting (150 HPS) Commercial Outdoor Security Lighting (175 MV) Commercial Outdoor Security Lighting (250 HPS) Commercial Outdoor Security Lighting (250 MV) Commercial Outdoor Security Lighting (400 MV) Commercial

143

Rooftop Unitary Air Conditioner with Integral Dedicated Outdoor Air System  

SciTech Connect

Energy use of rooftop and other unitary air-conditioners in commercial applications accounts for about 1 quad (10{sup 15} Btu) of primary energy use annually in the U.S. [Reference 7]. The realization that this cooling equipment accounts for the majority of commercial building cooled floorspace and the majority also of commercial building energy use has spurred development of improved-efficiency equipment as well as development of stricter standards addressing efficiency levels. Another key market driver affecting design of rooftop air-conditioning equipment has been concern regarding comfort and the control of humidity. Trends for increases in outdoor air ventilation rates in certain applications, and the increasing concern about indoor air quality problems associated with humidity levels and moisture in buildings points to a need for improved dehumidification capability in air-conditioning equipment of all types. In many cases addressing this issue exacerbates energy efficiency, and vice versa. The integrated dedicated outdoor air system configuration developed in this project addresses both energy and comfort/humidity issues.

Tiax Llc

2006-02-28T23:59:59.000Z

144

Leavenworth-Jefferson E C, Inc | Open Energy Information  

Open Energy Info (EERE)

Leavenworth-Jefferson E C, Inc Leavenworth-Jefferson E C, Inc Jump to: navigation, search Name Leavenworth-Jefferson E C, Inc Place Kansas Utility Id 10801 Utility Location Yes Ownership C NERC Location SPP Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Outdoor Area Lighting Service (HPS 100 W) Lighting Outdoor Area Lighting Service (HPS 250 W) Lighting Outdoor Area Lighting Service (HPS 400 W) Lighting Outdoor Area Lighting Service (MH 100 W) Lighting Outdoor Area Lighting Service (MH 250 W) Lighting Outdoor Area Lighting Service (MH 400 W) Lighting Outdoor Area Lighting Service (MV 175 W) Lighting

145

Diverse Power Incorporated | Open Energy Information  

Open Energy Info (EERE)

Diverse Power Incorporated Diverse Power Incorporated Jump to: navigation, search Name Diverse Power Incorporated Place Georgia Utility Id 19219 Utility Location Yes Ownership C NERC Location SERC NERC SERC Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png General Electric Service Commercial General Electric Service* Commercial Outdoor Lighting HPS 100 W Lighting Outdoor Lighting HPS 150 W Lighting Outdoor Lighting HPS 250 W Lighting Outdoor Lighting HPS 400 W Lighting Outdoor Lighting MH 1000 W Lighting Outdoor Lighting MH 400 W Lighting Outdoor Lighting MV 175 W Lighting

146

Use of Quantitative Uncertainty Analysis to Support M&V Decisions in ESPCs  

E-Print Network (OSTI)

lighting retrofit project in which the lighting energy savingslighting retrofit projects. Figure 3 shows the results of a Monte-Carlo simulation on the gross savings (

Mathew, Paul A.; Koehling, Erick; Kumar, Satish

2005-01-01T23:59:59.000Z

147

A Small-Area Study of Environmental Risk Assessment of Outdoor Falls  

Science Conference Proceedings (OSTI)

Falls in public places are an issue of great health concern especially for the elderly. Falls among the elderly is also a major health burden in many countries. This study describes a spatial approach to assess environmental causes of outdoor falls using ... Keywords: Environmental risk assessment, GIS, Outdoor falls, Small-area study, Spatial clustering

Poh-Chin Lai; Wing-Cheung Wong; Chien-Tat Low; Martin Wong; Ming-Houng Chan

2011-12-01T23:59:59.000Z

148

Bateau ivre: an artistic markerless outdoor mobile augmented reality installation on a riverboat  

Science Conference Proceedings (OSTI)

Bateau Ivre is a project presented on the Seine River to make a large audience aware of the possible developments of Augmented Reality through an artistic installation in a mobile outdoor environment. The installation could be viewed from a ship ... Keywords: augmented reality, heritage, mobile augmented reality, outdoor digital art, real-time image processing

Christian Jacquemin; Wai Kit Chan; Mathieu Courgeon

2010-10-01T23:59:59.000Z

149

Wind heat transfer coefficient in solar collectors in outdoor conditions  

Science Conference Proceedings (OSTI)

Knowledge of wind heat transfer coefficient, h{sub w}, is required for estimation of upward losses from the outer surface of flat plate solar collectors/solar cookers. In present study, an attempt has been made to estimate the wind induced convective heat transfer coefficient by employing unglazed test plate (of size about 0.9 m square) in outdoor conditions. Experiments, for measurement of h{sub w}, have been conducted on rooftop of a building in the Institute campus in summer season for 2 years. The estimated wind heat transfer coefficient has been correlated against wind speed by linear regression and power regression. Experimental values of wind heat transfer coefficient estimated in present work have been compared with studies of other researchers after normalizing for plate length. (author)

Kumar, Suresh; Mullick, S.C. [Centre for Energy Studies, Indian Institute of Technology, Delhi, Hauz Khas, New Delhi 110 016 (India)

2010-06-15T23:59:59.000Z

150

Thermosyphon coil arrangement for heat pump outdoor unit  

DOE Patents (OSTI)

For a heat pump, the outdoor unit is provided with a coil and a refrigerant flow arrangement there for which is such that in the heating mode of operation of the heat pump they operate in a thermosyphon fashion. The coil has a feed portion and an exit portion leading to a separator drum from which liquid refrigerant is returned through downcomer line for recirculation to the feed portion. The coil is tilted upwardly from entry to exit by the angle alpha to enhance the clearance of the two phases of refrigerant from each other in the heating mode of operation. There is no thermosyphon function in the cooling mode of operation. 9 figs.

Draper, R.

1984-05-22T23:59:59.000Z

151

A Remote Operation System for the 3MV Electron Microscope with a Both-Direction Conversation Capability  

Science Conference Proceedings (OSTI)

The 3MV ultrahigh voltage electron microscope (UHVEM) at the Research Center for UHVEM, Osaka University, has been widely used for microscopy of thick specimens, taking advantage of high penetration power of incident electrons. Recent developments in ...

Hirotaro Mori; Kiyokazu Yoshida; Shinji Shimojo; Hiroki Nogawa; Toyokazu Akiyama; Heishichiro Takahashi; Tamaki Shibayama

2004-01-01T23:59:59.000Z

152

Light-Light Scattering  

E-Print Network (OSTI)

For a long time, it is believed that the light by light scattering is described properly by the Lagrangian density obtained by Heisenberg and Euler. Here, we present a new calculation which is based on the modern field theory technique. It is found that the light-light scattering is completely different from the old expression. The reason is basically due to the unphysical condition (gauge condition) which was employed by the QED calcualtion of Karplus and Neumann. The correct cross section of light-light scattering at low energy of $(\\frac{\\omega}{m} \\ll 1)$ can be written as $ \\displaystyle{\\frac{d\\sigma}{d\\Omega}=\\frac{1}{(6\\pi)^2}\\frac{\\alpha^4} {(2\\omega)^2}(3+2\\cos^2\\theta +\\cos^4\\theta)}$.

Kanda, Naohiro

2011-01-01T23:59:59.000Z

153

Light-Light Scattering  

E-Print Network (OSTI)

For a long time, it is believed that the light by light scattering is described properly by the Lagrangian density obtained by Heisenberg and Euler. Here, we present a new calculation which is based on the modern field theory technique. It is found that the light-light scattering is completely different from the old expression. The reason is basically due to the unphysical condition (gauge condition) which was employed by the QED calcualtion of Karplus and Neumann. The correct cross section of light-light scattering at low energy of $(\\frac{\\omega}{m} \\ll 1)$ can be written as $ \\displaystyle{\\frac{d\\sigma}{d\\Omega}=\\frac{1}{(6\\pi)^2}\\frac{\\alpha^4} {(2\\omega)^2}(3+2\\cos^2\\theta +\\cos^4\\theta)}$.

Naohiro Kanda

2011-06-03T23:59:59.000Z

154

Texas A&M AgriLife Research Procedures 24.01.01.A0.09 Outdoor Burning  

E-Print Network (OSTI)

Texas A&M AgriLife Research Procedures 24.01.01.A0.09 Outdoor Burning Approved: October 5, 2000: August 27, 2014 Texas A&M AgriLife Research Procedure 24.01.01.A0.09 Outdoor Burning Page 1 of 2 PROCEDURE STATEMENT The Texas Commission on Environmental Quality (TCEQ) regulates outdoor burning (30 TAC

155

Energy Capture with Optimized Photovoltaic Cells under Low Lighting Conditions  

Science Conference Proceedings (OSTI)

The optimization of photovoltaic devices for versatile conditions is necessary to improve the energy capture for indoor applications, such as self sufficient sensors. However, the design rules of standard outdoor solar cells are not applicable for cells ... Keywords: energy harvesting, indoor photovoltaics, low lighting conditions, photovoltaic cells

Karola Ruhle, Leonhard M. Reindl, Martin Kasemann

2012-11-01T23:59:59.000Z

156

Salt River Electric Coop Corp | Open Energy Information  

Open Energy Info (EERE)

Salt River Electric Coop Corp Salt River Electric Coop Corp Place Kentucky Utility Id 16587 Utility Location Yes Ownership C NERC Location RFC NERC SERC Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png 100 (Decorative Underground) HPS 48 kWh Outdoor Lighting Lighting 100 Watt HPS 48 kWh Outdoor Lighting Lighting 175 Watt MV 75 kWh Outdoor Lighting Lighting 175 Wattage (Underground) MV 75 kWh (without pole) Lighting 250 Watt HPS 104 kWh Outdoor Lighting Lighting 400 Watt HPS 165 kWh Outdoor Lighting Lighting Cogeneration and small power production power purchase rate schedule less

157

Anode sputtering characteristics of the Berkeley 2.5 MV source  

SciTech Connect

An investigation was made of a number of parameters affecting the performance of the SuperHILAC 2.5 MV Adam injector source. The description will emphasize anode sputtered materials, and will discuss in some detail calcium and gold ion production. Parameters varied include electrode geometry, support gas type and electrode bias, to optimize beam intensity and electrode consumption. A factor of three improvement with high n$sup +$ gold ions appears evident with a new displaced electrode geometry. The source is operated in cold mode, is pulsed and operates usually at less than 0.6 amperes average current. Under these conditions source life has been measured to be sixteen hours at 25 percent duty factor when generating calcium ions with neon support gas. (auth)

Gavin, B.

1975-10-01T23:59:59.000Z

158

Indoor-Outdoor Air Leakage of Apartments and Commercial Buildings  

SciTech Connect

We compiled and analyzed available data concerning indoor-outdoor air leakage rates and building leakiness parameters for commercial buildings and apartments. We analyzed the data, and reviewed the related literature, to determine the current state of knowledge of the statistical distribution of air exchange rates and related parameters for California buildings, and to identify significant gaps in the current knowledge and data. Very few data were found from California buildings, so we compiled data from other states and some other countries. Even when data from other developed countries were included, data were sparse and few conclusive statements were possible. Little systematic variation in building leakage with construction type, building activity type, height, size, or location within the u.s. was observed. Commercial buildings and apartments seem to be about twice as leaky as single-family houses, per unit of building envelope area. Although further work collecting and analyzing leakage data might be useful, we suggest that a more important issue may be the transport of pollutants between units in apartments and mixed-use buildings, an under-studied phenomenon that may expose occupants to high levels of pollutants such as tobacco smoke or dry cleaning fumes.

Price, P.N.; Shehabi, A.; Chan, R.W.; Gadgil, A.J.

2006-06-01T23:59:59.000Z

159

Measuring Outdoor Air Intake Rates into Existing Building  

SciTech Connect

Practical and accurate technologies are needed for continuously measuring and controlling outdoor air (OA) intake rates in commercial building heating, ventilating, and air conditioning (HVAC) systems. This project evaluated two new measurement approaches. Laboratory experiments determined that OA flow rates were measurable with errors generally less than 10 percent using electronic air velocity probes installed between OA intake louver blades or at the outlet face of louvers. High accuracy was maintained with OA flow rates as low as 15 percent of the maximum for the louvers. Thus, with this measurement approach HVAC systems do not need separate OA intakes for minimum OA supply. System calibration parameters are required for each unique combination of louver type and velocity sensor location but calibrations are not necessary for each system installation. The research also determined that the accuracy of measuring OA flow rates with velocity probes located in the duct downstream of the intake louver was not improved by installing honeycomb airflow straighteners upstream of the probes. Errors varied with type of upstream louver, were as high as 100 percent, and were often greater than 25 percent. In conclusion, use of electronic air velocity probes between the blades of OA intake louvers or at the outlet face of louvers is a highly promising means of accurately measuring rates of OA flow into HVAC systems. The use of electronic velocity probes downstream of airflow straighteners is less promising, at least with the relatively small OA HVAC inlet systems employed in this research.

Fisk, William; Sullivan, Douglas; Cohen, Sebastian; Han, Hwataik

2009-04-16T23:59:59.000Z

160

Colour Recognition In Outdoor Images Through Context-Based Models  

E-Print Network (OSTI)

This paper analyzes the variation of the color of objects with respect to existing models of daylight and surface reflectance, and develops context-based models of daylight (based on the CIE model [18]) and hybrid surface reflectance (based on existing hybrid surface reflectance models [21, 25, 32, 35]) called the Normalized Photometric Function. Thereafter, given the time-of-day (which, along with location, is used to calculate the sun-angle [23]), approximate cloud cover and sun-visibility, the color of the incident daylight is predicted, and combined with the reflectance model of the target object to predict the apparent color of the object; image pixels are then classified based on the predicted color. Section 2 describes the causes for the variation in apparent color; section 3 gives a brief literature review; section 4 describes the CIE daylight model and the context-based daylight model developed in this study; section 5 analyzes surface reflectance with respect to existing models and then develops the Normalized Photometric Function (NPF) model; section 6 combines the daylight and NPF models for context-based color prediction; finally, section 7 summarizes the conclusions of the study. 2 Causes for color shift in outdoor scenes

Shashi Buluswar; Red Green; Red Green

1998-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "outdoor lighting mv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Town of Georgetown, Massachusetts (Utility Company) | Open Energy  

Open Energy Info (EERE)

Georgetown Georgetown Place Massachusetts Utility Id 7130 Utility Location Yes Ownership M NERC Location NPCC NERC NPCC Yes ISO NE Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Large General Service Rate C Industrial Large General Service Rate C - Metering Discount Industrial Municipal Rate M Commercial Municipal Rate M - Metering discount Commercial Outdoor Lighting Rate - 1000 Watt MV Lighting Outdoor Lighting Rate - 170 Watt H.P.S Lighting Outdoor Lighting Rate - 250 Watt H.P.S Lighting Outdoor Lighting Rate - 400 Watt MV Lighting Outdoor Lighting Rate - 70 Watt H.P.S Lighting

162

Architecture for environmental learning : a National Outdoor Leadership School in Baja, Mexico  

E-Print Network (OSTI)

An understanding of people, program, and place establishes a foundation from which to make architectural decisions. The focus of this thesis is to understand the needs of those involved in an outdoor education school in ...

Galyean, Taylor

1994-01-01T23:59:59.000Z

163

SITEWIDE CATEGORICAL EXCLUSION FOR OUTDOOR TESTS ON MATERIALS AND COMPONENTS, PACIFIC NORTHWEST NATIONAL  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SITEWIDE CATEGORICAL EXCLUSION FOR OUTDOOR TESTS ON SITEWIDE CATEGORICAL EXCLUSION FOR OUTDOOR TESTS ON MATERIALS AND COMPONENTS, PACIFIC NORTHWEST NATIONAL LABORATORY, RICHLAND, WASHINGTON Proposed AetioD: The U.S. Department of Energy (DOE) Pacific Northwest Site Office (PNSO) proposes to conduct outdoor tests and experiments on materials and equipment components under controlled conditions. No source, special nuclear, or byproduct materials would be involved, but encapsulated radioactive sources manufactured to applicable standards or other radiological materials could be used in activities under this categorical exclusion (eX). LoeatioD of Action: The locations would include DOE property at the Pacific Northwest National Laboratory (PNNL) Site and other offsite outdoor locations. Description of the Proposed Action:

164

Ideal balance of work, play makes outdoor enthusiast's James Miller life  

NLE Websites -- All DOE Office Websites (Extended Search)

Ideal balance of work, play makes outdoor enthusiast's life enviable Ideal balance of work, play makes outdoor enthusiast's life enviable Ideal balance of work, play makes outdoor enthusiast's James Miller life enviable Nuclear engineer graduate research assistant gets valueable experience while taking advantage of local outdoor recreational activities. August 2, 2012 James Miller Miller first came to the Laboratory in 2006 as a summer student. His college advisor, a former LANL employee, found him an internship through the student programs office. Miller highly recommends LANL as a place to start a career, "The student programs are very mentor-driven, allowing you to gain phenomenal experience and build a professional network that will set you up for the rest of your life." "I have access to top-level scientists in the world, doing some of the best

165

Roughness Lengths for Momentum and Heat Derived from Outdoor Urban Scale Models  

Science Conference Proceedings (OSTI)

Urban climate experimental results from the Comprehensive Outdoor Scale Model (COSMO) were used to estimate roughness lengths for momentum and heat. Two different physical scale models were used to investigate the scale dependence of the ...

M. Kanda; M. Kanega; T. Kawai; R. Moriwaki; H. Sugawara

2007-07-01T23:59:59.000Z

166

Factors affecting the indoor concentrations of carbonaceous aerosols of outdoor origin  

E-Print Network (OSTI)

Valley of California, USA. J. Aerosol Science 32, S631-S632.particles of outdoor origin. Aerosol Science and Technology,in Central California. Aerosol Science and Technology, 40,

Lunden, Melissa M.

2009-01-01T23:59:59.000Z

167

LED Lighting  

Energy.gov (U.S. Department of Energy (DOE))

Light-emitting diodes (LEDs) are light sources that differ from more traditional sources of light in that they are semiconductor devices that produce light when an electrical current is applied....

168

Village of Churchville, New York (Utility Company) | Open Energy  

Open Energy Info (EERE)

Churchville, New York (Utility Company) Churchville, New York (Utility Company) Jump to: navigation, search Name Village of Churchville Place New York Utility Id 3525 Utility Location Yes Ownership M NERC Location NPCC NERC NPCC Yes Activity Distribution Yes Alt Fuel Vehicle Yes Alt Fuel Vehicle2 Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Commercial 2 Commercial Commercial wDemand 3 Commercial Outdoor Lighting 1000W MH Lighting Outdoor Lighting 150W HPS Lighting Outdoor Lighting 250W HPS Lighting Outdoor Lighting 400W MH Lighting Outdoor Lighting 400W MV Lighting Outdoor Lighting Wood Pole Rental Lighting

169

San Miguel Power Assn, Inc | Open Energy Information  

Open Energy Info (EERE)

San Miguel Power Assn, Inc San Miguel Power Assn, Inc Place Colorado Utility Id 16622 Utility Location Yes Ownership C NERC Location WECC NERC WECC Yes ISO Other Yes Activity Transmission Yes Activity Distribution Yes Alt Fuel Vehicle Yes Alt Fuel Vehicle2 Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png General Service Demand Commercial General Service Non-Demand Residential Outdoor Lighting Level I: 100 watt MV or HPS Lighting Outdoor Lighting Level I: 150 watt MV or HPS Lighting Outdoor Lighting Level I: 200 watt Incandescent Lighting Outdoor Lighting Level I: 250 watt MV or HPS Lighting

170

Advances in X-Band TW Accelerator Structures Operating in the 100 MV/M Regime  

SciTech Connect

A CERN-SLAC-KEK collaboration on high gradient X-band accelerator structure development for CLIC has been ongoing for three years. The major outcome has been the demonstration of stable 100 MV/m gradient operation of a number of CLIC prototype structures. These structures were fabricated using the technology developed from 1994 to 2004 for the GLC/NLC linear collider initiative. One of the goals has been to refine the essential parameters and fabrication procedures needed to realize such a high gradient routinely. Another goal has been to develop structures with stronger dipole mode damping than those for GLC/NLC. The latter requires that the surface temperature rise during the pulse be higher, which may increase the breakdown rate. One structure with heavy damping has been RF processed and another is nearly finished. The breakdown rates of these structures were found to be higher by two orders of magnitude compared to those with equivalent acceleration mode parameters but without the damping features. This paper presents these results together with some of the earlier results from non-damped structures.

Higo, Toshiyasu; /KEK, Tsukuba; Higashi, Yasuo; /KEK, Tsukuba; Matsumoto, Shuji; /KEK, Tsukuba; Yokoyama, Kazue; /KEK, Tsukuba; Adolphsen, Chris; /SLAC; Dolgashev, Valery; /SLAC; Jensen, Aaron; /SLAC; Laurent, Lisa; /SLAC; Tantawi, Sami; /SLAC; Wang, Faya; /SLAC; Wang, Juwen; /SLAC; Dobert, Steffen; /CERN; Grudiev, Alexej; /CERN; Riddone, Germana; /CERN; Wuensch, Walter; /CERN; Zennaro, Riccardo; /CERN

2012-07-05T23:59:59.000Z

171

Browse wiki | Open Energy Information  

Open Energy Info (EERE)

DemandRateUnit kW + OpenEIUtilityRateDescription OUTDOOR LIGHTING SERVICE - LED Alternative to 175 MV and 100 Watts HPS SCHEDULE OL * Flat rate Adjustments the...

172

Browse wiki | Open Energy Information  

Open Energy Info (EERE)

SERVICE - 175W ... OUTDOOR PROTECTIVE LIGHTING SERVICE - 175W MV SCHEDULE PL * Special Terms and Conditions: The above rate is based on the use of existing poles and secondary...

173

Browse wiki | Open Energy Information  

Open Energy Info (EERE)

SERVICE - 400W ... OUTDOOR PROTECTIVE LIGHTING SERVICE - 400W MV SCHEDULE PL * Special Terms and Conditions: The above rate is based on the use of existing poles and secondary...

174

Ecological Modelling 117 (1999) 261267 Modeling bird mortality associated with the M/V Citrus oil spill  

E-Print Network (OSTI)

Ecological Modelling 117 (1999) 261­267 Modeling bird mortality associated with the M/V Citrus oil of Ornithology, American Museum of Natural History, Central Park West at 79th Street, New York NY 10024, USA/V Citrus oil spill in February 1996. Most of the islands beaches were searched on an irregular schedule

Rockwell, Robert F.

175

Low-Pressure Sodium Lighting Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Low-Pressure Sodium Lighting Basics Low-Pressure Sodium Lighting Basics Low-Pressure Sodium Lighting Basics August 16, 2013 - 10:17am Addthis Low-pressure sodium lighting provides more energy-efficient outdoor lighting than high-intensity discharge lighting, but it has very poor color rendition. Typical applications include highway and security lighting, where color is not important. Low-pressure sodium lamps work somewhat like fluorescent lamps. Like high-intensity discharge lighting, low-pressure sodium lamps require up to 10 minutes to start and have to cool before they can restart. Therefore, they are most suitable for applications in which they stay on for hours at a time. They are not suitable for use with motion detectors. The chart below compares low-pressure sodium lamps and high-intensity

176

3 MV hypervelocity dust accelerator at the Colorado Center for Lunar Dust and Atmospheric Studies  

Science Conference Proceedings (OSTI)

A hypervelocity dust accelerator for studying micrometeorite impacts has been constructed at the Colorado Center for Lunar Dust and Atmospheric Studies (CCLDAS) at the University of Colorado. Based on the Max-Planck-Instituet fuer Kernphysik (MPI-K) accelerator, this accelerator is capable of emitting single particles of a specific mass and velocity selected by the user. The accelerator consists of a 3 MV Pelletron generator with a dust source, four image charge pickup detectors, and two interchangeable target chambers: a large high-vacuum test bed and an ultra-high vacuum impact study chamber. The large test bed is a 1.2 m diameter, 1.5 m long cylindrical vacuum chamber capable of pressures as low as 10{sup -7} torr while the ultra-high vacuum chamber is a 0.75 m diameter, 1.1 m long chamber capable of pressures as low as 10{sup -10} torr. Using iron dust of up to 2 microns in diameter, final velocities have been measured up to 52 km/s. The spread of the dust particles and the effect of electrostatic focusing have been measured using a long exposure CCD and a quartz target. Furthermore, a new technique of particle selection is being developed using real time digital filtering techniques. Signals are digitized and then cross-correlated with a shaped filter, resulting in a suppressed noise floor. Improvements over the MPI-K design, which include a higher operating voltage and digital filtering for detection, increase the available parameter space of dust emitted by the accelerator. The CCLDAS dust facility is a user facility open to the scientific community to assist with instrument calibrations and experiments.

Shu, Anthony; Horanyi, Mihaly; Kempf, Sascha; Thomas, Evan [Colorado Center for Lunar Dust and Atmospheric Studies, Boulder, Colorado 80303 (United States); Department of Physics, University of Colorado, Boulder, Colorado 80309 (United States); Laboratory for Atmospheric and Space Physics, 1234 Innovation Drive, Boulder, Colorado 80303 (United States); Collette, Andrew; Drake, Keith; Northway, Paige [Colorado Center for Lunar Dust and Atmospheric Studies, Boulder, Colorado 80303 (United States); Laboratory for Atmospheric and Space Physics, 1234 Innovation Drive, Boulder, Colorado 80303 (United States); Gruen, Eberhard [Colorado Center for Lunar Dust and Atmospheric Studies, Boulder, Colorado 80303 (United States); MPI fuer Kernphysik, Saupfercheckweg 1, D-69117 Heidelberg (Germany); Mocker, Anna [Colorado Center for Lunar Dust and Atmospheric Studies, Boulder, Colorado 80303 (United States); MPI fuer Kernphysik, Saupfercheckweg 1, D-69117 Heidelberg (Germany); IRS, Universitaet Stuttgart, Pfaffenwaldring 31, D-70569 Stuttgart (Germany); Munsat, Tobin [Colorado Center for Lunar Dust and Atmospheric Studies, Boulder, Colorado 80303 (United States); Department of Physics, University of Colorado, Boulder, Colorado 80309 (United States); Srama, Ralf [MPI fuer Kernphysik, Saupfercheckweg 1, D-69117 Heidelberg (Germany); IRS, Universitaet Stuttgart, Pfaffenwaldring 31, D-70569 Stuttgart (Germany); and others

2012-07-15T23:59:59.000Z

177

Lighting Techniques  

Science Conference Proceedings (OSTI)

...Lighting is very critical in photography. The specimen should be placed on a background which will not detract from the resolution of the fracture surface. For basic lighting, one spotlight is suggested. The light is then raised or lowered, and

178

An evaluation of three commercially available technologies for real-time measurement of rates of outdoor airflow into HVAC systems  

E-Print Network (OSTI)

RATES OF OUTDOOR AIRFLOW INTO HVAC SYSTEMS William J. Fisk,determine flow resistance of hvac ducts and fittings. A S H

Fisk, William J.; Faulkner, David; Sullivan, Douglas P.

2004-01-01T23:59:59.000Z

179

Making recreational space: citizen involvement in outdoor recreation and park establishment in British Columbia, 1900-2000.  

E-Print Network (OSTI)

??Studies of outdoor recreation and the social construction of wilderness have shown how urban consumption of wilderness areas dispossessed rural residents from traditional land uses. (more)

Clayton, Jenny

2009-01-01T23:59:59.000Z

180

The effects of outdoor heat exchanger hydrophobic treatment on the performance of an air source heat pump.  

E-Print Network (OSTI)

??The effects of outdoor heat exchanger hydrophobic treatment on the performance of an air source heat pump were investigated. The base case tests used a (more)

Parker, Brandon DeWayne

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "outdoor lighting mv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Ningbo Liaoyuan Lighting Co | Open Energy Information  

Open Energy Info (EERE)

Liaoyuan Lighting Co Liaoyuan Lighting Co Jump to: navigation, search Name Ningbo Liaoyuan Lighting Co Place Yuyao, Zhejiang Province, China Zip 315408 Sector Solar, Wind energy Product Engaged in outdoor LED lighting manufacture and design including street lamps and solar/wind hybrid street lamps. Coordinates 30.047501°, 121.151222° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":30.047501,"lon":121.151222,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

182

Microsoft Word - Outdoor Small- and Pilot-Scale Research and Development 3768X_final  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Outdoor, Small- and Pilot-Scale Research and Development (3768X) Outdoor, Small- and Pilot-Scale Research and Development (3768X) Program or Field Office: Office of Science - ORNL Location(s) (City/County/State): Oak Ridge, Tennessee Proposed Action Description: The U.S. Department of Energy Oak Ridge National Laboratory (ORNL) Site Office (DOE-OSO) proposes to conduct outdoor, small- and pilot-scale research and development activities and associated transfer, lease, disposition or acquisition of interests in personal or real property involving advanced materials, biological and ecological systems, energy science, and national security including but not limited to collecting samples and analyzing ecosystem and atmospheric field data; developing, evaluating and testing equipment, materials and components; and

183

Solar Decathlon Design Places People and the Outdoors at its Heart |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Solar Decathlon Design Places People and the Outdoors at its Heart Solar Decathlon Design Places People and the Outdoors at its Heart Solar Decathlon Design Places People and the Outdoors at its Heart May 26, 2011 - 5:57pm Addthis Members of Team New Zealand | Courtesy of the New Zealand team's Flickr photostream Members of Team New Zealand | Courtesy of the New Zealand team's Flickr photostream Erin R. Pierce Erin R. Pierce Digital Communications Specialist, Office of Public Affairs How can I participate? The next Solar Decathlon will be held Sept. 23-Oct. 2, 2011, at the National Mall's West Potomac Park in Washington, D.C. In honor of the U.S Department of Energy's Solar Decathlon -- which challenges 20 collegiate teams to design, build and operate solar-powered houses that are cost-effective, energy-efficient and attractive -- we are

184

B3.11 SWCX for Outdoor Tests, Experiments on Materials and Equipment Components-  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 SWCX for Outdoor Tests, Experiments on Materials and Equipment Components- 1 SWCX for Outdoor Tests, Experiments on Materials and Equipment Components- Revision 0 Sitewide Categorical Exclusion for Outdoor Tests, Experiments on Materials and Equipment Components Introduction .A .. s defined in the U.S. Department of Energy's (DOE) Richland Operations Office Integrated Management System Procedure, NEPA Analysis at Hanford, a sitewide categorical exclusion is: An application of DOE categorical exclusions described in 10 CFR 1021, Appendices A and B, which may apply to Hanford Site proposed actions (activities) that are "sitewide" in nature and extent, which the cognizant DOE Hanford NCO has determined fit within the scope (i.e., same n

185

Solar Decathlon Design Places People and the Outdoors at its Heart |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Solar Decathlon Design Places People and the Outdoors at its Heart Solar Decathlon Design Places People and the Outdoors at its Heart Solar Decathlon Design Places People and the Outdoors at its Heart May 26, 2011 - 5:57pm Addthis Members of Team New Zealand | Courtesy of the New Zealand team's Flickr photostream Members of Team New Zealand | Courtesy of the New Zealand team's Flickr photostream Erin R. Pierce Erin R. Pierce Digital Communications Specialist, Office of Public Affairs How can I participate? The next Solar Decathlon will be held Sept. 23-Oct. 2, 2011, at the National Mall's West Potomac Park in Washington, D.C. In honor of the U.S Department of Energy's Solar Decathlon -- which challenges 20 collegiate teams to design, build and operate solar-powered houses that are cost-effective, energy-efficient and attractive -- we are

186

Cullman Power Board | Open Energy Information  

Open Energy Info (EERE)

Board Board Jump to: navigation, search Name Cullman Power Board Place Alabama Utility Id 4617 Utility Location Yes Ownership M NERC Location SERC NERC SERC Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Outdoor Lights 100 W HPS Lighting Outdoor Lights 175 W MV Lighting Outdoor Lights 400 W MV Lighting Residential Residential Security Light Service 1000 W MH Lighting Security Light Service 250 W HPS Flood Lighting Security Light Service 250 W MH Lighting Security Light Service 400 W HPS Lighting Security Light Service 400 W HPS Flood Lighting

187

Lighting Research Center Lighting Products  

Science Conference Proceedings (OSTI)

... 12) Solid State Lighting Luminaires - Color Characteristic Measurements. [22/S04] IES LM-16:1993 Practical Guide to Colorimetry of Light Sources. ...

2013-07-26T23:59:59.000Z

188

Outlaw lighting  

SciTech Connect

Demand-side management programs by utilities and the federal government`s Green Lights program have made significant inroads in promoting energy-efficient lighting. But the Energy Policy Act now prohibits certain types of lighting. This article provides analysis to help architects determine new lamp performance compared with older lighting products.

Bryan, H.

1994-12-01T23:59:59.000Z

189

Little River Electric Coop Inc | Open Energy Information  

Open Energy Info (EERE)

River Electric Coop Inc River Electric Coop Inc Place South Carolina Utility Id 11019 Utility Location Yes Ownership C NERC Location SERC NERC SERC Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Commercial Commercial General Service-Commercial Commercial Large Power Service Industrial Outdoor Lighting Flood Light 1000 W Lighting Outdoor Lighting Flood Light 250 W Lighting Outdoor Lighting Flood Light 400 W Lighting Outdoor Lighting HPS 100 W Lighting Outdoor Lighting MV 175 W Lighting Residential Residential Residential Energy Conservation Residential Average Rates

190

First Demonstration of Combined kV/MV Image-Guided Real-Time Dynamic Multileaf-Collimator Target Tracking  

SciTech Connect

Purpose: For intrafraction motion management, a real-time tracking system was developed by combining fiducial marker-based tracking via simultaneous kilovoltage (kV) and megavoltage (MV) imaging and a dynamic multileaf collimator (DMLC) beam-tracking system. Methods and Materials: The integrated tracking system employed a Varian Trilogy system equipped with kV/MV imaging systems and a Millennium 120-leaf MLC. A gold marker in elliptical motion (2-cm superior-inferior, 1-cm left-right, 10 cycles/min) was simultaneously imaged by the kV and MV imagers at 6.7 Hz and segmented in real time. With these two-dimensional projections, the tracking software triangulated the three-dimensional marker position and repositioned the MLC leaves to follow the motion. Phantom studies were performed to evaluate time delay from image acquisition to MLC adjustment, tracking error, and dosimetric impact of target motion with and without tracking. Results: The time delay of the integrated tracking system was {approx}450 ms. The tracking error using a prediction algorithm was 0.9 {+-} 0.5 mm for the elliptical motion. The dose distribution with tracking showed better target coverage and less dose to surrounding region over no tracking. The failure rate of the gamma test (3%/3-mm criteria) was 22.5% without tracking but was reduced to 0.2% with tracking. Conclusion: For the first time, a complete tracking system combining kV/MV image-guided target tracking and DMLC beam tracking was demonstrated. The average geometric error was less than 1 mm, and the dosimetric error was negligible. This system is a promising method for intrafraction motion management.

Cho, Byungchul [Department of Radiation Oncology, Stanford University, Stanford, CA (United States)], E-mail: bccho@stanford.edu; Poulsen, Per R. [Department of Radiation Oncology, Stanford University, Stanford, CA (United States); Department of Medical Physics, Department of Oncology, Aarhus University, Aarhus (Denmark); Sloutsky, Alex [Varian Medical Systems, Palo Alto, CA (United States); Sawant, Amit; Keall, Paul J. [Department of Radiation Oncology, Stanford University, Stanford, CA (United States)

2009-07-01T23:59:59.000Z

191

Plant Support Engineering: Life Cycle Management Planning Sourcebooks: Medium-Voltage (MV) Cables and Accessories (Terminations and Splices)  

Science Conference Proceedings (OSTI)

EPRI is producing a series of Life Cycle Management Planning Sourcebooks, each containing a compilation of industry experience information and data on aging degradation and historical performance for a specific type of system, structure, or component (SSC). This sourcebook provides information and guidance for implementing cost-effective life cycle management (LCM) planning for medium-voltage (MV) cables and accessories (terminations and field splices)

2006-11-20T23:59:59.000Z

192

City of Tuscumbia, Alabama (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

Tuscumbia, Alabama (Utility Company) Tuscumbia, Alabama (Utility Company) Jump to: navigation, search Name City of Tuscumbia Place Alabama Utility Id 19307 Utility Location Yes Ownership M NERC Location SERC NERC SERC Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png General Power ( 50 kw or more) Commercial General Power ( demand 1000 kw or more) Commercial General Power(50 kw or less) Commercial Outdoor Lighting (1000) Lighting Outdoor Lighting (175 MV) Lighting Outdoor Lighting (250 HPS) Lighting Outdoor Lighting (400 MV) Lighting Outside Lights(100 HPS) Lighting Residential Rate Residential

193

Design of a 7-MV Linear Transformer Driver (LTD) for down-hole flash x-ray radiography.  

Science Conference Proceedings (OSTI)

Pulsed power driven flash x-ray radiography is a valuable diagnostic for subcritical experiments at the Nevada Test Site. The existing dual-axis Cygnus system produces images using a 2.25 MV electron beam diode to produce intense x-rays from a small source. Future hydrodynamic experiments will likely use objects with higher areal mass, requiring increased x-ray dose and higher voltages while maintaining small source spot size. A linear transformer driver (LTD) is a compact pulsed power technology with applications ranging from pulsed power flash x-ray radiography to high current Z-pinch accelerators. This report describes the design of a 7-MV dual-axis system that occupies the same lab space as the Cygnus accelerators. The work builds on a design proposed in a previous report [1]. This new design provides increased diode voltage from a lower impedance accelerator to improve coupling to low impedance diodes such as the self magnetic pinch (SMP) diode. The design also improves the predicted reliability by operating at a lower charge voltage and removing components that have proven vulnerable to failure. Simulations of the new design and experimental results of the 1-MV prototype are presented.

Cordova, Steve Ray; Welch, Dale Robert (Voss Scientific, Albuquerque, NM); Oliver, Bryan Velten; Rose, David Vincent (Voss Scientific, Albuquerque, NM); Johnson, David Lee (L-3 Communications - Pulse Sciences, San Leandro, CA); Bruner, Nichelle Lee (Voss Scientific, Albuquerque, NM); Leckbee, Joshua J.

2008-09-01T23:59:59.000Z

194

The NREL Outdoor Accelerated-weathering Tracking System and Photovoltaic Module Exposure Results  

DOE Green Energy (OSTI)

This paper describes the Outdoor Accelerated-weathering Tracking System (OATS) and interim results for the first OATS study on photovoltaic (PV) modules. With two test planes measuring 1.52 x 1.83 m, OATS provides a unique solar-concentrating exposure capability. Test sample temperatures are moderated by air blowers. Water spray capability exists for wetting samples. The OATS two-axis tracker points to the sun using software calculations. Non-imaging aluminum reflectors give a nominal clear-sky optical concentration ratio of three. Field-qualification measurements in the test plane under reflector conditions showed its relative irradiance non-uniformity was '' 15% for a clear-sky summer day with '' 75 mm as the smallest distance for that non-uniformity. Exposure studies began in November 1997 on seven pairs of commercially available ribbon silicon, crystalline silicon and amorphous silicon PV modules kept at constant resistive load. The modules were periodically removed from OATS for visual inspection and solar simulator performance measurements. There were no module failures. This PV module study is ongoing and later results will be compared to other testing techniques. Through July 1998, the modules under reflector conditions received 392 MJ/m2 of total ultraviolet (TUV) exposure. That was 2.07 times the TUV exposure compared to a south-facing fixed array tilted 40{sup o} up from horizontal at NREL. Similarly, the modules in the test plane under the covered reflectors received 1.04 times the fixed array TUV exposure. For the test plane under the covered reflectors there was a loss of 13% TUV exposure attributed to the reflectors blocking some of the diffuse-sky UV light. Also through July 1998, the OATS sunlight availability measured 95% compared to the cumulative global normal exposure at the NREL Solar Radiation Research Laboratory (SRRL). The OATS sunlight availability losses included downtime when the PV modules were removed, and when there were OAT S tracking problems, maintenance, and repair. For December 1997 through July 1998, the SRRL cumulative exposure was 99% compared to the respective monthly averages from years 1961 through 1990 at Boulder, Colorado.

Basso, T. S.

1998-10-31T23:59:59.000Z

195

The NREL Outdoor Accelerated-Weathering Tracking System Photovoltaic Module Exposure Results  

DOE Green Energy (OSTI)

Status results are presented for the Outdoor Accelerated-Weathering Tracking System (OATS) first study on photovoltaic (PV) modules. Studies began in November 1997 on pairs of commercially available crystalline silicon and amorphous silicon (a-Si) PV modules kept at constant resistive load.

Basso, T. S.

2000-01-01T23:59:59.000Z

196

EVLA Memo No. 89 The EVLA Outdoor Antenna Test Range Project  

E-Print Network (OSTI)

Projected Costs if new range equipment were purchased Total Material and Equipment costs (to date) for building test range: Funds required to complete project Total NRAO Costs (estimate) without NMT involvementEVLA Memo No. 89 The EVLA Outdoor Antenna Test Range Project: Fourth Quarter 2004, Progress Report

Groppi, Christopher

197

Evaluation of Emerging Line Inspection Technologies: Results of 2012 Outdoor Laboratory Tests  

Science Conference Proceedings (OSTI)

This report describes outdoor laboratory testing performed in 2012 to evaluate different approaches to establish conductor temperature during a helicopter-based Lidar field survey of an existing overhead transmission line. Establishing conductor temperature during Lidar surveys is necessary to assemble a line model to determine line sags, and thus clearances, under full rating and specified environmental conditions. ...

2013-09-26T23:59:59.000Z

198

Stability of CIS/CIGS Modules at the Outdoor Test Facility over Two Decades: Preprint  

DOE Green Energy (OSTI)

This paper discusses examining the status and question of long-term stability of copper indium diselenide (CIS) photovoltaic (PV) module performance for numerous modules that are deployed in the array field, or on the roof of, the outdoor test facility (OTF) at NREL, acquired from two manufacturers.

del Cueto, J. A.; Rummel, S.; Kroposki, B.; Osterwald, C.; Anderberg, A.

2008-05-01T23:59:59.000Z

199

Many exterior entry and walkway lights in residential and commercial  

E-Print Network (OSTI)

. E N V I R O N M E N T A L L Y S O U N D A N D E N E R G Y E F F I C I E N T #12;Hotel/motel staff, contractors, and utility staff can use the information on this system. Key next steps include: · Building Owners/Managers and Lighting Specifiers--Specify the LED Hybrid Outdoor Fixture. · Utility Staff

200

Lighting Controls  

NLE Websites -- All DOE Office Websites (Extended Search)

corridors. The overall range of savings was six to 80 percent. The Advanced Lighting Guidelines On-Line Edition New Buildings Institute 2011 presents a table of lighting energy...

Note: This page contains sample records for the topic "outdoor lighting mv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Floodplain Assessment for the Proposed Outdoor Fire Range Upgrades at TA-72 in Lower Sandia Canyon, Los Alamos National Laboratory  

Science Conference Proceedings (OSTI)

Los Alamos National Laboratory (LANL) is preparing to implement actions in Sandia Canyon at Technical Area (TA) 72. Los Alamos National Security (LANS) biologists conducted a floodplain determination and this project is partially located within a 100-year floodplain. The proposed project is to upgrade the existing outdoor shooting range facilities at TA-72. These upgrades will result in increased safety and efficiencies in the training for Protective Force personnel. In order to remain current on training requirements, the firing ranges at TA-72 will be upgraded which will result in increased safety and efficiencies in the training for Protective Force personnel (Figure 1). These upgrades will allow for an increase in class size and more people to be qualified at the ranges. Some of these upgrades will be built within the 100-year floodplain. The upgrades include: concrete pads for turning target systems and shooting positions, new lighting to illuminate the firing range for night fire, a new speaker system for range operations, canopies at two locations, an impact berm at the far end of the 300-yard mark, and a block wall for road protection.

Hathcock, Charles D. [Los Alamos National Laboratory

2012-08-27T23:59:59.000Z

202

City of Paris, Tennessee (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

Paris Paris Place Tennessee Utility Id 14455 Utility Location Yes Ownership M NERC Location SERC NERC SERC Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png General Power Rate- GSA Commercial General Power Rate- GSA2 Commercial General Power- GSA3 Commercial Outdoor Lighting Rate- LS- Part A Lighting Outdoor Lighting Rate- LS- Part A Traffic Signals and Athletic Field Lighting Lighting Outdoor Lighting- LS- Part B (1000W HPS) Lighting Outdoor Lighting- LS- Part B (1000W MV or Incandescent) Lighting Outdoor Lighting- LS- Part B (100W HPS) Lighting

203

Shape the light, light the shape - lighting installation in performance.  

E-Print Network (OSTI)

??This thesis investigates the lighting design theory Light Inside Out, which is the technique of shaping light toward a creation of lighting installation in performance (more)

Yu, Lih-Hwa, 1972-

2010-01-01T23:59:59.000Z

204

Lighting Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Purple LED lamp Purple LED lamp Lighting Systems Lighting research is aimed at improving the energy efficiency of lighting systems in buildings and homes across the nation. The goal is to reduce lighting energy consumption by 50% over twenty years by improving the efficiency of light sources, and controlling and delivering illumination so that it is available, where and when needed, and at the required intensity. Research falls into four main areas: Sources and Ballasts, Light Distribution Systems, Controls and Communications, and Human Factors. Contacts Francis Rubinstein FMRubinstein@lbl.gov (510) 486-4096 Links Lighting Research Group Batteries and Fuel Cells Buildings Energy Efficiency Applications Commercial Buildings Cool Roofs and Heat Islands Demand Response Energy Efficiency Program and Market Trends

205

City of Dover, Ohio (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

Ohio (Utility Company) Ohio (Utility Company) Jump to: navigation, search Name City of Dover Place Ohio Utility Id 5336 Utility Location Yes Ownership M NERC Location RFC NERC RFC Yes Operates Generating Plant Yes Activity Buying Transmission Yes Activity Distribution Yes Activity Bundled Services Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png General Service Rates Commercial General Service Rates V2 Industrial Rates Industrial Private Outdoor Lighting 100w hps Lighting Private Outdoor Lighting 175 w mv Lighting Private Outdoor Lighting 189 w incandescent Lighting Private Outdoor Lighting 250 w mv Lighting

206

Hamilton County Elec Coop Assn | Open Energy Information  

Open Energy Info (EERE)

Hamilton County Elec Coop Assn Hamilton County Elec Coop Assn Place Texas Utility Id 7979 Utility Location Yes Ownership C NERC Location TRE NERC ERCOT Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Outdoor Lighting 150-Watt HPS Lighting Outdoor Lighting 175-Watt MV Lighting Outdoor Lighting 400-Watt HPS Lighting Outdoor Lighting 400-Watt MV Lighting Rate 01 All Non-Residential Under 50kw, Three Phase Commercial Rate 01 Non-Residential Commercial Rate 01 Residential Residential Rate 02 All Non-Residential Over 50kw Commercial Average Rates Residential: $0.1250/kWh

207

Oconee Electric Member Corp | Open Energy Information  

Open Energy Info (EERE)

Oconee Electric Member Corp Oconee Electric Member Corp Jump to: navigation, search Name Oconee Electric Member Corp Place Georgia Utility Id 13962 Utility Location Yes Ownership C NERC Location SERC NERC SERC Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png General Service Commercial Large Power Service Commercial Large Power Service* Industrial Outdoor Lighting MV 175 W Overhead Lighting Outdoor Lighting MV 175 W Underground Lighting Outdoor Lighting S 100 W Overhead Lighting Outdoor Lighting S 100 W Underground Lighting Residential and Farm Service Residential

208

Oahe Electric Coop Inc | Open Energy Information  

Open Energy Info (EERE)

Oahe Electric Coop Inc Oahe Electric Coop Inc Jump to: navigation, search Name Oahe Electric Coop Inc Place South Dakota Utility Id 13853 Utility Location Yes Ownership C NERC Location MRO NERC MRO Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Farm & Residential Residential Industrial - Irrigation Industrial Large Power - Industrial Industrial Large Power-Commercial Commercial Outdoor Lighting 100 W HPS:Metered Lighting Outdoor Lighting 100 W HPS:Unmetered Lighting Outdoor Lighting 175 W MV: Metered Lighting Outdoor Lighting 175 W MV:Unmetered Lighting

209

Blue Ridge Mountain E M C | Open Energy Information  

Open Energy Info (EERE)

E M C E M C Jump to: navigation, search Name Blue Ridge Mountain E M C Place Georgia Utility Id 1891 Utility Location Yes Ownership C NERC Location SERC NERC SERC Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png General Power Rate (GSA 1) Commercial General Power Rate (GSA 2)* Commercial General Power Rate (GSA 3)* Industrial Outdoor Lighting HPS 100 W Lighting Outdoor Lighting HPS 250 W Lighting Outdoor Lighting MV 175 W Lighting Outdoor Lighting MV 400 W Lighting Residential Residential Average Rates Residential: $0.1110/kWh Commercial: $0.1220/kWh

210

Blue Ridge Mountain E M C (North Carolina) | Open Energy Information  

Open Energy Info (EERE)

Mountain E M C (North Carolina) Mountain E M C (North Carolina) Jump to: navigation, search Name Blue Ridge Mountain E M C Place North Carolina Utility Id 1891 References EIA Form EIA-861 Final Data File for 2010 - File2_2010[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png General Power Rate (GSA 1) Commercial General Power Rate (GSA 2)* Commercial General Power Rate (GSA 3)* Industrial Outdoor Lighting HPS 100 W Lighting Outdoor Lighting HPS 250 W Lighting Outdoor Lighting MV 175 W Lighting Outdoor Lighting MV 400 W Lighting Residential Residential Average Rates Residential: $0.1100/kWh Commercial: $0.1340/kWh References ↑ "EIA Form EIA-861 Final Data File for 2010 - File2_2010"

211

Marine accident report - collision of greek bulk carrier M/V Irene S. Lemos and Panamanian bulk carrier M/V Maritime Justice, lower Mississippi River, near New Orleans, Louisiana, November 9, 1978  

SciTech Connect

At 0640 c.s.t., on November 9, 1978, the Greek bulk carrier M/V IRENE S. LEMOS and the Panamanian bulk carrier M/V MARITIME JUSTICE collided in the lower Mississippi River at mile 78.3 AHP, about 15 statute miles below New Orleans, Louisiana. Because of dense fog, the visibility at the time of the collision was less than 400 feet. The vessels struck nearly head-on, damaging the bows of both vessels. There were no deaths or injuries. Cost of repairs to the two vessels was estimated at $4 million. About 1,800 barrels of fuel oil were discharged into the Mississippi River and resulted in local health officials securing the municipal water intake 1/2 mile downriver. The National Transportation Safety Board determines that the probable cause of the accident was the poor judgment of the pilots of the MARITIME JUSTICE and the IRENE S. LEMOS when they agreed to meet and pass, in near zero visibility conditions, at English Turn Bend where the risk of collision was much greater than in a straight portion of the river and the failure of the vessels to move to the extreme right of the channel.

Not Available

1980-02-14T23:59:59.000Z

212

Building a predictive model of indoor concentrations of outdoor PM-2.5 for  

NLE Websites -- All DOE Office Websites (Extended Search)

Building a predictive model of indoor concentrations of outdoor PM-2.5 for Building a predictive model of indoor concentrations of outdoor PM-2.5 for a residential research house in Clovis, California Title Building a predictive model of indoor concentrations of outdoor PM-2.5 for a residential research house in Clovis, California Publication Type Report Year of Publication 2002 Authors Fischer, Marc L., Melissa M. Lunden, Tracy L. Thatcher, David Littlejohn, Thomas W. Kirchstetter, Susanne V. Hering, Richard G. Sextro, and Nancy J. Brown Abstract The prevalence of relocatable classrooms (RCs) at schools is rising due to federal and state initiatives to reduce K-3 class size, and limited capital resources. Concerns regarding inadequate ventilation and indoor air and environmental quality (IEQ) in RCs have been raised. Adequate ventilation is an important link between improved IEQ and energy efficiency for schools. Since students and teachers spend the majority of a 7-8 hour school day inside classrooms, indoor contaminant concentrations are assumed to drive personal school-day exposures. We conducted a demonstration project in new relocatable classrooms (RCs) during the 2001-02 school year to address these issues. Four new 24' x 40' (960 ft2) RCs were constructed and sited in pairs at an elementary school campus in each of two participant school districts (SD) in Northern California. Each RC was equipped with two heating, ventilation, and air conditioning (HVAC) systems, one per module. The two HVAC systems were a standard heat pump with intermittent 25-50% outdoor air ventilation and an energy-efficient advanced system, based on indirect-direct evaporative cooling with an integrated natural gas-fired hydronic heating loop and improved particle filtration, providing continuous 100% outdoor air ventilation at = 15 ft3 min-1 occupant-1. Alternate carpets, wall panels, and ceiling panels were installed in two classrooms -- one in each pair -- based on the results of a laboratory study of VOC emissions from standard and alternate materials. Numerous IEQ and outdoor air quality and meteorological parameters were measured either continuously over the school year or as integrated school day samples during the fall cooling and winter heating seasons. Details of the RC designs, the field monitoring methodology including handling, storage, transport and management of chemical samples and data, and analyses to be conducted are presented

213

Sample M&V Plan from the Texas Workshop: Preparing and Evaluating Measurement and Verification Plans for Energy Performance Contracts in Texas  

E-Print Network (OSTI)

This document contains a sample M&V plan that has been prepared in accordance with the Texas Guidelines for Measurement and Verification for Energy Performance Contracts. This sample M&V plan was extracted from the March 1999 workshop, entitled: "Preparing and Evaluating Measurement and Verification Plans for Energy Performance Contracts in Texas", Sponsored by the Texas was developed by the Texas State Energy Coordinating Council, and the General Services Commission, State Energy Conservation Office. The M&V plan represents an actual Performance Contract that was approved by the TECC/SECO. This document is a public domain document that is intended to serve as an example document of an M&V plan. Certain manufacturer's trade names are mentioned in this document for the purpose of describing the types of equipment used to measure energy use. Such reference does not constitute an endorsement or recommendation of such equipment, and is provided for informational purposes only.

Haberl, J. S.

1999-01-01T23:59:59.000Z

214

[symphony orchestra] [light music  

E-Print Network (OSTI)

] [Christianity] [life philosophy] [unification church study] [quiz study] [role playing game] SF [Science Fiction Association] [history study] [geography] [railroad study] [astronomy] [science] [biology] [outdoor activity] [bowling] [boating] [boxing] [yachting] [rifle] [lacrosse] [lacrosse] [rugby] [track and field

Takada, Shoji

215

[symphony orchestra] [light music  

E-Print Network (OSTI)

] [Christianity] [life philosophy] [unification church study] [quiz study] [role playing game] SF [Science] [geography] [railroad study] [astronomy] [science] [biology] [outdoor activity] [wild creature study training] [volleyball] [volleyball] [handball] [field hockey] [figure skating] [fencing] [bowling

Takada, Shoji

216

Citizens Electric Corporation | Open Energy Information  

Open Energy Info (EERE)

Corporation Corporation Place Missouri Utility Id 3600 Utility Location Yes Ownership C NERC Location SERC NERC SERC Yes Activity Transmission Yes Activity Buying Transmission Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Commercial Multi-Phase Commercial Commercial Single-Phase Commercial Industrial Industrial Outdoor Lighting HPS 100 W Lighting Outdoor Lighting HPS 100 W w/ Transformer Lighting Outdoor Lighting HPS 250 W Lighting Outdoor Lighting HPS 250 W w/ Transformer Lighting Outdoor Lighting MV 175 W Lighting Residential Residential Average Rates

217

Tombigbee Electric Power Assn | Open Energy Information  

Open Energy Info (EERE)

Power Assn Power Assn Place Mississippi Utility Id 19007 Utility Location Yes Ownership C NERC Location SERC NERC SERC Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png General Power - Commercial - GSA-2 (51 - 1000 KW) Commercial General Power - Commercial GSA-1 (less than 50 KW) Commercial General Power - Commercial GSA-3 Commercial Outdoor Lighting - 100 HPS Lighting Outdoor Lighting - 175 MV Lighting Outdoor Lighting - 250 HPS Cobrahead Lighting Outdoor Lighting - 400 HPS Cobrahead Lighting Outdoor Lighting - 400 Watt Flood Lighting Residential Residential

218

Tri-County Electric Coop, Inc (Florida) | Open Energy Information  

Open Energy Info (EERE)

Tri-County Electric Coop, Inc (Florida) Tri-County Electric Coop, Inc (Florida) Jump to: navigation, search Name Tri-County Electric Coop, Inc Place Florida Utility Id 19161 Utility Location Yes Ownership C NERC Location FRCC NERC FRCC Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Commercial General Three- Phase Service Time- Of- Day Schedule Commercial Commercial Outdoor Lighting HPS 100 W Lighting Commercial Outdoor Lighting HPS 150 W Lighting Commercial Outdoor Lighting HPS 400 W Lighting Commercial Outdoor Lighting MHF 400 W Lighting Commercial Outdoor Lighting MV 175 W Lighting

219

Commercial Lighting and LED Lighting Incentives  

Energy.gov (U.S. Department of Energy (DOE))

Incentives for energy efficient commercial lighting equipment as well as commercial LED lighting equipment are available to businesses under the Efficiency Vermont Lighting and LED Lighting...

220

Factors affecting the indoor concentrations of carbonaceous aerosols of outdoor origin  

NLE Websites -- All DOE Office Websites (Extended Search)

Factors affecting the indoor concentrations of carbonaceous aerosols of Factors affecting the indoor concentrations of carbonaceous aerosols of outdoor origin Melissa M. Lunden 1 ∗ , Thomas W. Kirchstetter 1 , Tracy L. Thatcher 2 , Susanne V. Hering 3 , and Nancy J. Brown 1 1 Environmental Energy Technologies Division, Lawrence Berkeley National Laboratory, 1 Cyclotron Rd., Berkeley, CA 94720, USA 2 Department of Civil and Environmental Engineering, California Polytechnic State University, San Luis Obispo, CA 93407, USA 2 Aerosol Dynamics Inc., 2329 4th Street, Berkeley, CA 94710, USA Abstract A field study was conducted in an unoccupied single story residence in Clovis, California to provide data to address issues important to assess the indoor exposure to particles of outdoor origin. Measurements of black and organic carbonaceous aerosols were performed using a

Note: This page contains sample records for the topic "outdoor lighting mv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Long Term Stability of the LHC Superconducting Cryodipoles after Outdoor Storage  

E-Print Network (OSTI)

The main superconducting dipoles for the LHC are being stored outdoors for periods from a few weeks to several years after conditioning with dry nitrogen gas. Such a storage before installation in the 27 km circumference tunnel may affect not only the mechanical and cryogenic functionality of the cryodipoles but also their quench and field performance. A dedicated task force was established to study all aspects of long term behaviour of the stored cryodipoles, with particular emphasis on electrical and vacuum integrity, quench training behaviour, magnetic field quality, performance of the thermal insulation, mechanical stability of magnet shape and of the interface between cold mass and cryostat, degradation ofmaterials and welds. In particular, one specifically selected cryodipole stored outdoors for more than one year, was retested at cold. In addition, various tests have been carried out on the cryodipole assembly and on the most critical subcomponents to study aspects such as the hygrothermal behaviour of...

Seyvet, F; Bertarelli, A; Denis, O; El-Kallassi, P; Fernndez-Cano, E D; Fessia, P; Ilie, S D; Jeanneret, J B; Letant, D; Poncet, A; Pugnat, P; Savary, F; Sgobba, Stefano; Siemko, A; Todesco, E; Tommasini, D; Veness, R; Vullierme, B; Wildner, E

2006-01-01T23:59:59.000Z

222

Outdoor Performance of a Thin-Film Gallium-Arsenide Photovoltaic Module  

SciTech Connect

We deployed a 855 cm2 thin-film, single-junction gallium arsenide (GaAs) photovoltaic (PV) module outdoors. Due to its fundamentally different cell technology compared to silicon (Si), the module responds differently to outdoor conditions. On average during the test, the GaAs module produced more power when its temperature was higher. We show that its maximum-power temperature coefficient, while actually negative, is several times smaller in magnitude than that of a Si module used for comparison. The positive correlation of power with temperature in GaAs is due to temperature-correlated changes in the incident spectrum. We show that a simple correction based on precipitable water vapor (PWV) brings the photocurrent temperature coefficient into agreement with that measured by other methods and predicted by theory. The low operating temperature and small temperature coefficient of GaAs give it an energy production advantage in warm weather.

Silverman, T. J.; Deceglie, M. G.; Marion, B.; Cowley, S.; Kayes, B.; Kurtz, S.

2013-06-01T23:59:59.000Z

223

Analysis of a Dedicated Outdoor Air System and Low Temperature Supply Air Conditioning System  

E-Print Network (OSTI)

This paper presents the principles and the characteristics of a dedicated outdoor air system (DOAS) and low temperature supply air system. DOAS is offered based on the demands of indoor air quality and the low temperature supply air system is offered based on the demands of saving energy. The two systems are very similar, which is analyzed in this paper. Using actual engineering, we compute the air flow rate, cold load and energy consumption in detail, and provide some good conclusions.

Guang, L.; Li, R.

2006-01-01T23:59:59.000Z

224

Comparison of indoor-outdoor thermal performance for the Sunpak evacuated tube liquid collector  

DOE Green Energy (OSTI)

Performance data is provided for current Sunpak production collectors. The effects of an improved manifold are seen from the test results. The test results show excellent correlation between the solar simulator derived test results and outdoor test results. Also, because of different incident angle modifiers, the all-day efficiency of this collector with a diffuse reflector is found to be comparable to the performance with the standard shaped specular reflector.

Not Available

1980-03-01T23:59:59.000Z

225

Air Corrosivity in U.S. Outdoor-Air-Cooled Data Centers is Similar to That  

NLE Websites -- All DOE Office Websites (Extended Search)

Air Corrosivity in U.S. Outdoor-Air-Cooled Data Centers is Similar to That Air Corrosivity in U.S. Outdoor-Air-Cooled Data Centers is Similar to That in Conventional Data Centers Title Air Corrosivity in U.S. Outdoor-Air-Cooled Data Centers is Similar to That in Conventional Data Centers Publication Type Report LBNL Report Number LBNL-4951E Year of Publication 2011 Authors Coles, Henry C., Tae Won Han, Phillip N. Price, Ashok J. Gadgil, and William F. Tschudi Date Published 03/2011 Abstract There is a concern that environmental-contamination caused corrosion may negatively affect Information Technology (IT) equipment reliability. Nineteen data centers in the United States and two in India were evaluated using Corrosion Classification Coupons (CCC) to assess environmental air quality as it may relate IT equipment reliability. The data centers were of two basic types: "closed" and outside-air cooled. A closed data center provides cool air to the IT equipment using air conditioning in which only a small percentage of the recirculation air is "make-up" air continuously supplied from outside to meet human health requirements. An outside-air cooled data center uses outside air directly as the primary source for IT equipment cooling. Corrosion measuring coupons containing copper and silver metal strips were placed in both "closed" and outside-air cooled data centers. The coupons were placed at each data center (closed and outside-air cooled types) with the location categorized into three groups:

226

Outdoor Air, Heat Wheels and JCPenney: A New Approach to Retail Ventilation  

E-Print Network (OSTI)

JCPenney Construction Services department is responsible for the construction of new stores, takeover of existing facilities to create a new store, repairs to existing JCPenney facilities and the expansion and modernization of stores across the nation and the world. Each year, JCPenney Construction Services handles approximately 50 projects along these lines. After the implementation of ASHRAE 62- 1989 by JCPenney and many major building codes, including BOCA, mechanical engineers at JCPenney noticed a sharp increase in the percentage of cooling capacity required to cool the outdoor ventilation air. In an effort to limit this impact, both in first cost and in operational costs, JCPenney is beginning to make an effort to use enthalpy heat wheels in the hot and humid climate areas where it is economically feasible. This paper discusses the efforts of JCPenney to implement this option to the treatment of outdoor air in a store in Baton Rouge, LA while maintaining indoor air quality requirements as stated in ASHRAE Standard 62-1989 and maintaining energy efficiency. This paper also discusses the projected energy savings and operations of this alternative to the standard treatment of outdoor air.

Smith, C. S.; Bartlett, T. A.

1998-01-01T23:59:59.000Z

227

New lighting and controls to save 67% at mall  

SciTech Connect

A metal halide lighting system and a Staco control system that dims lighting in response to sunlight should save a Dallas hotel and office mall 67% in electricity costs. The new system replaces quartz lamps in the 160-foot-high atrium. The savings are a combination of state tax credits and lower air conditioning costs, which will pay for the $25,000 project in about 18 months. The metal halide system was chosen over sodium lighting in order to have more attractive color rendition and because it provides about twice as many lumens per watt as the quartz lamps. The Staco system will dim lamps in response to outdoor light and turn lights above a skating rink on and off at prescribed times.

Kennedy, K.

1985-06-17T23:59:59.000Z

228

Numerical Simulations of Outdoor Heat Stress Index and Heat Disorder Risk in the 23 Wards of Tokyo  

Science Conference Proceedings (OSTI)

In the present study, the summertime outdoor heat stress hazard and heat disorder risks (HDRs) were simulated numerically using a mesoscale meteorological model combined with an urban canopy model and a building energy model. Model grid maps ...

Yukitaka OHASHI; Yukihiro KIKEGAWA; Tomohiko IHARA; Nanami SUGIYAMA

229

Urban Energy Balance Obtained from the Comprehensive Outdoor Scale Model Experiment. Part I: Basic Features of the Surface Energy Balance  

Science Conference Proceedings (OSTI)

The objective of this study is to examine the basic features of the surface energy balance (SEB) using the data obtained from the Comprehensive Outdoor Scale Model (COSMO). COSMO is an idealized miniature city that has no vegetation, no human ...

Toru Kawai; Manabu Kanda

2010-07-01T23:59:59.000Z

230

Texas A&M AgriLife Extension Service Procedures 24.01.01.X0.09 Outdoor Burning  

E-Print Network (OSTI)

Texas A&M AgriLife Extension Service Procedures 24.01.01.X0.09 Outdoor Burning Approved: October 5 Review: August 27, 2014 Texas A&M AgriLife Extension Service Procedure 24.01.01.X0.09 Outdoor Burning burning (30 TAC 111.201-221).Those units located on the Texas A&M University campus will follow the Open

231

Northern Lights  

NLE Websites -- All DOE Office Websites (Extended Search)

Northern Lights Northern Lights Nature Bulletin No. 178-A February 6, 1965 Forest Preserve District of Cook County Seymour Simon, President Roland F. Eisenbeis, Supt. of Conservation NORTHERN LIGHTS To a person seeing the Aurora Borealis or "northern lights" for the first time, it is an uncanny awe-inspiring spectacle. Sometimes it begins as a glow of red on the northern horizon, ominously suggesting a great fire, gradually changing to a curtain of violet-white, or greenish-yellow light extending from east to west. Some times this may be transformed to appear as fold upon fold of luminous draperies that march majestically across the sky; sometimes as a vast multitude of gigantic flaming swords furiously slashing at the heavens; sometimes as a flowing crown with long undulating colored streamers fanning downward and outward.

232

Light Organizing/Organizing Light [Light in Place  

E-Print Network (OSTI)

a street through alter nating areas of dark and light, welandscapes, streets and squares. Light summons our spiritfor changing light, both outside rooms (such as streets and

Schwartz, Martin

1992-01-01T23:59:59.000Z

233

Solid-State Lighting: LED Lighting Facts  

NLE Websites -- All DOE Office Websites (Extended Search)

Market-Based Programs Printable Version Share this resource Send a link to Solid-State Lighting: LED Lighting Facts to someone by E-mail Share Solid-State Lighting: LED Lighting Facts on Facebook Tweet about Solid-State Lighting: LED Lighting Facts on Twitter Bookmark Solid-State Lighting: LED Lighting Facts on Google Bookmark Solid-State Lighting: LED Lighting Facts on Delicious Rank Solid-State Lighting: LED Lighting Facts on Digg Find More places to share Solid-State Lighting: LED Lighting Facts on AddThis.com... LED Lighting Facts CALiPER Program Standards Development Technical Information Network Gateway Demonstrations Municipal Consortium Design Competitions LED Lighting Facts LED lighting facts - A Program of the U.S. DOE DOE's LED Lighting Facts® program showcases LED products for general

234

Using Daylight to Light the Access Zone of Road Tunnels  

NLE Websites -- All DOE Office Websites (Extended Search)

Using Daylight to Light the Access Zone of Road Tunnels Using Daylight to Light the Access Zone of Road Tunnels Speaker(s): Eliyahu Ne'eman Date: March 4, 2003 - 12:00pm Location: Bldg. 90 Lighting guides for roadway tunnels specify relatively high luminances for the "access zone" into the tunnel. They are needed to allow the eyes of the driver sufficient time to adapt during the short period of the transition from the outdoor natural daylight levels to the fairly low luminances along the main length of the tunnel. Usually, the necessary high luminances are provided by rows of costly luminaries which consume a lot of electricity during peak use periods and need a good deal of maintenance. To save some electric power, controls are used to dim the lighting on cloudy hours. Daylight has been used for the access zone in several tunnels around the

235

Transpired Collectors (Solar Preheaters for Outdoor Ventilation Air)--023385m FTA collectors  

Energy.gov (U.S. Department of Energy (DOE))

Federal Technology Alert describes transpired collectors or solar preheaters for outdoor ventilation air. The President's Million Solar Roofs Initiative aims to install 1 million solar energy systems on residential, commercial, and public-sector buildings by 2010. In support of the Initiative, and as part of a continual effort to ensure U.S. buildings are energy efficient and environmentally sustainable, the U.S. Department of Energy's Federal Energy Management Program (FEMP) will help install those solar systems targeted for the federal sector.

236

Thermal performance evaluation of the solargenics solar collector at outdoor conditions  

DOE Green Energy (OSTI)

Information contained within this report presents test procedures used during the performance of an evaluation program. The test program was conducted to obtain the following performance data and information on the solar collector. (1) Thermal performance data under outdoor conditions, (2) Structural behavior of collector under static conditions, and (3) Effects of long term exposure to material weathering elements. The Solargenics is a liquid, single-glazed, flat-plate collector. Approximate dimensions of each collector are 240 inches long, 36 inches wide, and 3.5 inches in depth.

Not Available

1978-12-01T23:59:59.000Z

237

The Measured Energy Impact of Infiltration in an Outdoor Test Cell  

E-Print Network (OSTI)

The energy consumption calculation of house envelopes assumes that conduction heat loss is independent on air infiltration heat loss, and that energy consumption is the sum of these losses. Anderlind [1985], Liu [1987], and Claridge et at. [1989] showed this method can overestimate energy consumption substantially under steady-state conditions. Bailly [1987] and Anderson [1987] reported much smaller house energy consumption when the air flow was organized by mechanical systems. However, none of these studies quantified energy loss reduction under a variety of outdoor weather conditions. The energy performance was investigated in an outdoor test cell with different leakage configurations and air flow rates under both infiltration and exfiltration. It was found that the energy consumption was not only dependent on air flow rate, temperature differences, and solar radiation, but also on the air flow direction and the air leakage configuration. Infiltration could lead to a much lower heating energy consumption than that of exfiltration, and exfiltration could lead to a much lower cooling energy consumption than that of infiltration. The air infiltration energy consumption of a leaky house could be 9 times as high as that of a tight house even when the air flow rate was the same for both houses.

Liu, M.; Claridge, D. E.

1992-05-01T23:59:59.000Z

238

Outdoor recreational use of the Salton Sea with reference to potential impacts of geothermal development  

DOE Green Energy (OSTI)

The objectives of this study were to describe the types, levels, and locations of outdoor recreation uses in the Salton Sea area, the number and principal activities of visitors, and to estimate the consequences upon outdoor recreation of geothermal development and other activities that might affect the Salton Sea. It is concluded that since the Salton Sea is considered legally to be a sump for agricultural, municipal, and presumably geothermal waste waters, recreational use of the Sea for fishing and boating (from present marinas) will undoubtedly continue to decline, unless there is a major policy change. Use of the shoreline for camping, the surrounding roads and lands for scenic viewing, ORV events, and retirement or recreation communities will not decline, and will probably increase, assuming control of hydrogen sulfide odors. Two ways in which the fishing and present boating facilities could be returned to a wholly usable steady state are discussed. One is by construction of a diked evaporation pond system at the south end of the Sea. This would allow a means of control over both water level and salinity. Another means, less costly but more difficult to effectively control, would be to budget geothermal plant use of, and disposal of wastes in, Salton Sea water. (JGB)

Twiss, R.; Sidener, J.; Bingham, G.; Burke, J.E.

1978-04-01T23:59:59.000Z

239

Light Computing  

E-Print Network (OSTI)

A configuration of light pulses is generated, together with emitters and receptors, that allows computing. The computing is extraordinarily high in number of flops per second, exceeding the capability of a quantum computer for a given size and coherence region. The emitters and receptors are based on the quantum diode, which can emit and detect individual photons with high accuracy.

Gordon Chalmers

2006-10-13T23:59:59.000Z

240

EK101 Engineering Light Smart Lighting  

E-Print Network (OSTI)

extensively in concert lighting and are finding increased usage in dance lighting because refers to the upstage back curtain (is white or a light color), which can be us for lighting or special Mixer #12;Monitor House speaker Lighting System Control Board: Similar to the sound board, the light

Bifano, Thomas

Note: This page contains sample records for the topic "outdoor lighting mv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Influence of Transfer Efficiency of the Outdoor Pipe Network and Boiler Operating Efficiency on the Building Heat Consumption Index  

E-Print Network (OSTI)

This paper analyzes the influence of transfer efficiency of the outdoor pipe network and operating efficiency of the boiler on the building heat consumption index, on the premise of saving up to 65 percent energy in different climates. The results show that transfer efficiency is not influenced by the climate, and the influence is in accordance with that in other climates. The article also presents data on the energy consumption caused by the improvement of the transfer efficiency of the outdoor pipe network and the operating efficiency of the boiler, and the calculated formula for the building heat consumption index on the condition of saving 65 percent energy.

Fang, X.; Wang, Z.; Liu, H.

2006-01-01T23:59:59.000Z

242

Outdoor test for thermal performance evaluation of the Owens-Illinois Sunpak SEC-601 (air) solar collector  

DOE Green Energy (OSTI)

The test procedures used and the test results obtained during the performance of an evaluation test program on the Owens-Illinois Sunpak, model SEC-601, air solar collector under natural outdoor weather conditions are presented. All testing activities were performed on a single module installed on the Marshall Space Flight Center Solar House. The test was performed and the data evaluated according to the methods provided in ASHRAE 93-77 (Method of Testing to Determine the Thermal Performance of Solar Collectors) as applicable to outdoor testing of solar collectors.

Not Available

1979-12-01T23:59:59.000Z

243

Progress on building a predictive model of indoor concentrations of outdoor PM-2.5 in homes  

Science Conference Proceedings (OSTI)

The goal of this project is to develop a physically-based, semi-empirical model that describes the concentration of indoor concentration of PM-2.5 (particle mass that is less than 2.5 microns in diameter) and its sulfate, nitrate, organic and black carbon constituents, derived from outdoor sources. We have established the methodology and experimental plan for building the model. Experimental measurements in residential style houses, in Richmond and Fresno, California, are being conducted to provide parameters for and evaluation of this model. The model will be used to improve estimates of human exposures to PM-2.5 of outdoor origin. The objectives of this study are to perform measurement and modeling tasks that produce a tested, semi-mechanistic description of chemical species-specific and residential PM-2.5 arising from the combination of outdoor PM and gas phase sources (HNO{sub 3} and NH{sub 3}), and indoor gas phase (e.g. NH{sub 3}) sources. We specifically address how indoor PM is affected by differences between indoor and outdoor temperature and relative humidity. In addition, we are interested in losses of particles within the building and as they migrate through the building shell. The resulting model will be general enough to predict probability distributions for species-specific indoor concentrations of PM-2.5 based on outdoor PM, and gas phase species concentrations, meteorological conditions, building construction characteristics, and HVAC operating conditions. Controlled intensive experiments were conducted at a suburban research house located in Clovis, California. The experiments utilized a large suite of instruments including conventional aerosol, meteorological and house characterization devices. In addition, two new instruments were developed providing high time resolution for the important particulate species of nitrate, sulfate, and carbon as well as important gaseous species including ammonia and nitric acid. Important initial observations include the result that, with rare exceptions, there is virtually no nitrate found inside the house. This nitrate appears to dissociate into ammonia and nitric acid with the nitric acid quickly depositing out. Initial model development has included work on characterizing penetration and deposition rates, the dynamic behavior of the indoor/outdoor ratio, and predicting infiltration rates. Results from the exploration of the indoor/outdoor ratio show that the traditional assumption of steady state conditions does not hold in general. Many values of the indoor/outdoor ratio exist for any single value of the infiltration rate. Successful prediction of the infiltration rate from measured driving variables is important for extending the results from the Clovis house to the larger housing stock.

Lunden, Melissa M.; Thatcher, Tracy L.; Littlejohn, David; Fischer, Marc L.; Kirchstetter, Thomas W.; Brown, Nancy J.; Hering, Susanne

2001-09-01T23:59:59.000Z

244

Texas Electric Lighting Report  

NLE Websites -- All DOE Office Websites (Extended Search)

electric lighting electric lighting The SNAP House's lighting design aims for elegant simplicity in concept, use, and maintenance. Throughout the house, soft, ambient light is juxtaposed with bright, direct task lighting. All ambient and most task lighting is integrated directly into the architectural design of the house. An accent light wall between the bedroom and bathroom provides a glowing light for nighttime navigation.

245

Development of a formula to determine outdoor residential water consumption in College Station, Texas  

E-Print Network (OSTI)

This thesis reports the findings of a telephone survey, public tax records, and water bills of 233 randomly selected single family detached residences, built between 1992 and 1994 in College Station, Texas. Weather information consisting of average daily temperature, daily precipitation, and daily evaporation was also necessary for analysis of gallons of water used. The purpose of this study was to (1) develop a marketing tool that builders could use to determine the water saving features for a particular area to increase sales and lead to possible mortgage reductions, and (2) help cities and developers size water lines appropriately for projected water needs. The COMBEAS computer program and various statistical tests were used to report to findings of the study. No known study has been produced that has analyzed water usage using the COMBEAS regression program and analyzed all of the variables contained in this study. Using the COMBEAS program, comparing gallons to temperature, a base load was determined that remains constant throughout the year. Any watering above this base load was attributed to temperature related (outdoor) watering. Twenty three variables, arrived at by prior research and related to water usage were then tested for significance against the amount of water attributable to outdoor watering. Of these variables, 11 were found to be significant using forward stepwise regression. Multi-colinearity tests were then conducted using the Peal-son Product Moment correlation. After eliminating all but one of those variables in each group that were highly related, 6 variables remained, including non-baseload rainfall and evaporation, yard area, existence of a sprinkler system and/or pool, and the predominant variety of grass. Using these six variables as independent variables, and the temperature dependent watering as the dependent variable, the group was then tested using best subset regression. From these results, those variables making up the highest R2 combination with p-values of less than .05 were then analyzed using multiple linear regression, producing a formula that would most accurately predict outdoor water usage for College Station, Texas and areas with similar climates and populations.

Winkelblech, Audrey Kristen

1997-01-01T23:59:59.000Z

246

Light Emitting Diode (LED) Lighting and Systems  

Science Conference Proceedings (OSTI)

This EPRI Technical Update addresses the most promising and unique energy efficient light source light emitting diode (LED) lighting. Business and technical market factors (Chapter 2) explain the upcoming growth of the LED and LED lighting market. Future technical improvements to LEDs and systems are also emphasized. Discussion of the importance of utility involvement in helping their customers make the switch from traditional lighting to LED lighting is provided. LED lighting technologies are covered in...

2007-12-21T23:59:59.000Z

247

Fundamental science investigations to develop a 6-MV laser triggered gas switch for ZR: first annual report.  

Science Conference Proceedings (OSTI)

In October 2005, an intensive three-year Laser Triggered Gas Switch (LTGS) development program was initiated to investigate and solve observed performance and reliability issues with the LTGS for ZR. The approach taken has been one of mission-focused research: to revisit and reassess the design, to establish a fundamental understanding of LTGS operation and failure modes, and to test evolving operational hypotheses. This effort is aimed toward deploying an initial switch for ZR in 2007, on supporting rolling upgrades to ZR as the technology can be developed, and to prepare with scientific understanding for the even higher voltage switches anticipated needed for future high-yield accelerators. The ZR LTGS was identified as a potential area of concern quite early, but since initial assessments performed on a simplified Switch Test Bed (STB) at 5 MV showed 300-shot lifetimes on multiple switch builds, this component was judged acceptable. When the Z{sub 20} engineering module was brought online in October 2003 frequent flashovers of the plastic switch envelope were observed at the increased stresses required to compensate for the programmatically increased ZR load inductance. As of October 2006, there have been 1423 Z{sub 20} shots assessing a variety of LTGS designs. Numerous incremental and fundamental switch design modifications have been investigated. As we continue to investigate the LTGS, the basic science of plastic surface tracking, laser triggering, cascade breakdown, and optics degradation remain high-priority mission-focused research topics. Significant progress has been made and, while the switch does not yet achieve design requirements, we are on the path to develop successively better switches for rolling upgrade improvements to ZR. This report summarizes the work performed in FY 2006 by the large team. A high-level summary is followed by detailed individual topical reports.

Warne, Larry Kevin; Van Den Avyle, James A.; Lehr, Jane Marie; Rose, David (Voss Scientific, Albuquerque, NM); Krompholz, Hermann G. (Texas Tech University, Lubbock, TX); Vela, Russell (Texas Tech University, Lubbock, TX); Jorgenson, Roy Eberhardt; Timoshkin, Igor (University of Strathclyde, Glasgow, Scotland); Woodworth, Joseph Ray; Prestwich, Kenneth Randel (Voss Scientific, Albuquerque, NM); Krile, John (Texas Tech University, Lubbock, TX); Given, Martin (University of Strathclyde, Glasgow, Scotland); McKee, G. Randall; Rosenthal, Stephen Edgar; Struve, Kenneth William; Welch, Dale Robert (Voss Scientific, Albuquerque, NM); Benwell, Andrew L. (University of Missouri-Columbia, Columbia, Missouri); Kovaleski, Scott (University of Missouri-Columbia, Columbia, Missouri); LeChien, Keith, R.; Johnson, David (Titan Pulse Sciences Division); Fouracre, R.A. (University of Strathclyde, Glasgow, Scotland); Yeckel, Chris (University of Missouri-Columbia, Columbia, Missouri); Wakeland, Peter Eric (Ktech Corporation, Albuquerque, NM); Miller, A. R. (Titan Pulse Sciences Division); Hodge, Keith Conquest (Ktech Corporation, Albuquerque, NM); Pasik, Michael Francis; Savage, Mark Edward; Maenchen, John Eric; Curry, Randy D. (University of Missouri-Columbia, Columbia, Missouri); Feltz, Greg (Ktech Corporation, Albuquerque, NM); Bliss, David Emery; MacGregor, Scott (University of Strathclyde, Glasgow, Scotland); Corley, J. P. (Ktech Corporation, Albuquerque, NM); Anaya, Victor (Ktech Corporation, Albuquerque, NM); Wallace, Zachariah (Ktech Corporation, Albuquerque, NM); Thoma, Carsten (Voss Scientific, Albuquerque, NM); Neuber, Andreas. (Texas Tech University, Lubbock, TX)

2007-03-01T23:59:59.000Z

248

An Assessment of the U.S. Residential Lighting Market  

SciTech Connect

This report provides background data upon which residential lighting fixture energy conservation programs can be built. The current stock of residential lighting is described by usage level, lamp wattage, fixture type, and location within the house. Data are discussed that indicate that 25% of residential fixtures are responsible for 80% of residential lighting energy use, and that justify targeting these fixtures as candidates for retrofit with energy-efficient fixtures. Fixtures determined to have the highest energy use are hardwired ceiling fixtures in kitchens, living/family rooms, dining rooms, and outdoors. An assessment of the market for residential fixtures shows that nearly half of new residential fixtures are imported, 61% of new fixtures sold are hardwired, and about half of all new fixtures sold are for ceiling installation.

Jennings, Judy; Brown, Rich; Moezzi, Mithra; Mills, Evan; Sardinsky, Robert

1995-10-01T23:59:59.000Z

249

Escambia River Elec Coop, Inc | Open Energy Information  

Open Energy Info (EERE)

Escambia River Elec Coop, Inc Escambia River Elec Coop, Inc Jump to: navigation, search Name Escambia River Elec Coop, Inc Place Florida Utility Id 5964 Utility Location Yes Ownership C NERC Location SERC NERC SERC Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Athletic Field Lighting- AL Commercial General Service Demand- GSD Commercial General Service Time of Use- GS TOU Commercial General Service- GS Commercial Outdoor Lighting- LS (100 W HPS) Lighting Outdoor Lighting- LS (175 W MH/MV) Lighting Outdoor Lighting- LS (250 W HPS-CH) Lighting Outdoor Lighting- LS (250 W HPS-Dir) Lighting

250

Capabilities of the High Voltage Stress Test System at the Outdoor Test Facility  

DOE Green Energy (OSTI)

We illustrate the capabilities of the High Voltage Stress Test (HVST) which operates continuously in the array field east of the Outdoor Test Facility at the National Renewable Energy Laboratory. Because we know that photovoltaic (PV) modules generating electrical power in both residential and utility-scale array installations will develop high-voltage biases approaching 600 VDC and 1,000 VDC, respectively, we expect such high voltages will result in current leakage between cells and ground, typically through the frames or mounts. We know that inevitably such leakage currents are capable of producing electrochemical corrosion that adversely impacts long-term module performance. With the HVST, we stress or operate PV modules under high-voltage bias, to characterize their leakage currents under all prevailing ambient conditions and assess performance changes emanating from high-voltage stress. We perform this test both on single modules and an active array.

del Cueto, J. A.; Trudell, D.; Sekulic, W.

2005-11-01T23:59:59.000Z

251

Measuring the Optical Performance of Evacuated Receivers via an Outdoor Thermal Transient Test: Preprint  

DOE Green Energy (OSTI)

Modern parabolic trough solar collectors operated at high temperatures to provide the heat input to Rankine steam power cycles employ evacuated receiver tubes along the collector focal line. High performance is achieved via the use of a selective surface with a high absorptance for incoming short-wave solar radiation and a low emittance for outgoing long-wave infrared radiation, as well as the use of a hard vacuum to essentially eliminate convective and conductive heat losses. This paper describes a new method that determines receiver overall optical efficiency by exposing a fluid-filled, pre-cooled receiver to one sun outdoors and measuring the slope of the temperature curve at the point where the receiver temperature passes the glass envelope temperature (that is, the point at which there is no heat gain or loss from the absorber). This transient test method offers the potential advantages of simplicity, high accuracy, and the use of the actual solar spectrum.

Kutscher, C.; Burkholder, F.; Netter, J.

2011-08-01T23:59:59.000Z

252

Contextual analysis of human non-verbal guide behaviors to inform the development of FROG, the fun robotic outdoor guide  

Science Conference Proceedings (OSTI)

This paper reports the first step in a series of studies to design the interaction behaviors of an outdoor robotic guide. We describe and report the use case development carried out to identify effective human tour guide behaviors. In this paper we focus ... Keywords: contextual analysis, human tour guide behavior, non-verbal robot behavior

Daphne E. Karreman; Elisabeth M. A. G. van Dijk; Vanessa Evers

2012-10-01T23:59:59.000Z

253

An outdoor time scenes simulation scheme based on support vector regression with radial basis function on DCT domain  

Science Conference Proceedings (OSTI)

In this paper, a novel strategy for forecasting outdoor scenes is introduced. This new approach combines the support vector regression in neural network computation and the discrete cosine transform (DCT). In 1995, Vapnik introduced a neural-network ... Keywords: Discrete cosine transform, Neural network, Radial basis function (RBF), Scene, Support vector regression

Chen-Chung Liu; Kai-Wen Chuang

2009-09-01T23:59:59.000Z

254

Field Results from Application of the Outdoor-Air/Economizer Diagnostician for Commissioning and O&M  

SciTech Connect

This paper presents results of field testing an automated diagnostician for outdoor-air-supply and economizer systems that can be used for commissioning purposes. The fundamental capabilities of the tool are described and key results of its application on six air handlers in a large hotel building are discussed. Ancillary issues pertinent to the development and application of such tools are also presented.

Pratt, Robert G.; Katipamula, Srinivas; Brambley, Michael R.; Blanc, Steven L.

2000-05-31T23:59:59.000Z

255

The effect of hardware configuration on the performance of residential air conditioning systems at high outdoor ambient temperatures  

E-Print Network (OSTI)

A study was performed which investigated the effect of hardware configuration on air conditioning cooling system performance at high outdoor temperatures. The initial phase of the investigation involved the testing of ten residential air conditioning units in psychrometric rooms at Texas A&M University. All units were tested using ARI Standard 210/240 (1989) test procedures. Tests were conducted at indoor conditions of 80'F (26.7'C) db and 67'F (19.4'C) wb, and outdoor db temperatures of 82'F (27.8'C), 95-F (35-C), 100-F (37.8-C), 105-F (40.6-C), 1 10-F (43.3-C), and 120-F (48.90C). The second phase of the research involved the analysis of manufacturers' published cooling performance data for various hardware configurations. For the experimental work, measurements were taken to determine total capacity, system power, EER, and power factor. These results were then compared to manufacturers' predicted values. For the capacity, the experimental results were an average of 2.6% below the manufacturers' published values for outdoor temperatures from 85'F (29.4'C) to 115'F (46.l'C). Experimental power measurements were on average 0.4% above manufacturers' listed results. For the EER, experimental results were an average of 2.9% less than the manufacturers' predicted values. The power factors of all units were above 0.95 for the tested outdoor temperatures. In the analysis of manufacturers' published data, relationships between steady-state performance, cyclic performance, and hardware configuration were investigated for a variety of air conditioning units. A statistical relationship was found between the SEER of a unit and its corresponding EER. The split-system units possessed greater increases in EER for a given increase in SEER than the package or two-speed units. Averages values of EER/SEER for EER's at 95F (350C) were highest for the split-system units, followed by the package and two-speed units, respectively. Normalized capacity, power, and EER curves were investigated at outdoor temperatures from 85F (29.40C) to 115OF (46.1"C). On average, the two-speed units showed the smallest decrease in capacity with an increase in outdoor temperature, followed by the split-system and package-system units. The smallest power increase and smallest EER decrease with an increase in outdoor temperature were exhibited by the split-system units, followed by the two-speed and package-system units.

Bain, Joel Alan

1995-01-01T23:59:59.000Z

256

Energy and lighting design  

SciTech Connect

A detailed examination of the current energy conservation practices for lighting systems is presented. This first part of a two-part presentation covers the following: energy and lighting design; lighting and energy standards; lighting efficiency factors; light control and photometrics; lighting and the architectural interior; luminaire impact on the environment; basic design techniques; the lighting power budget; and conservation through control.

Helms, R.N.

1979-11-01T23:59:59.000Z

257

Light Emitting Diodes and General Lighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Light Emitting Diodes and General Lighting Speaker(s): Martin Moeck Date: August 6, 2009 - 12:00pm Location: 90-3122 We give a short overview on high-power light emitting diodes,...

258

Evaluation of Lighting and Lighting Control Technologies  

Science Conference Proceedings (OSTI)

Energy efficient lighting and lighting controls have been a means to significant energy savings for many facilities around the world. Advances in lighting sources often allow for the conservation of quality of light while providing more flexibility in the control of light. Additionally, advances in core technologies within the lighting marketplace regularly lead to the introduction of new lamps, fixtures and controls. With the rapid introduction of new products and designs, it is important to ...

2013-11-15T23:59:59.000Z

259

A comparison of Nannochloropsis salina growth performance in two outdoor pond designs: conventional raceways versus the ARID pond with superior temperature management  

SciTech Connect

The present study examines how climatic conditions and pond design affect the growth performance of microalgae. From January to April of 2011, outdoor batch cultures of Nannochloropsis salina were grown in three replicate 780 L conventional raceways, as well as in an experimental 7500 L ARID (Algae Raceway Integrated Design) pond. The ARID culture system utilizes a series of 8 to 20 cm deep basins and a 1.5 m deep canal to enhance light exposure and mitigate temperature variations and extremes. The ARID culture reached the stationary phase 27 days earlier than the conventional raceways, which can be attributed to its superior temperature management and shallower basins. On a night when the air temperature dropped to -9 C, the water temperature was 18 C higher in the ARID pond than in the conventional raceways. Lipid and fatty acid content ranged from 16 - 25 % and 5 - 15 %, respectively, as a percentage of AFDW. Palmitic, palmitoleic, and eicosapentaenoic acid comprised the majority of fatty acids. While the ARID culture system achieved nearly double the volumetric productivity relative to the conventional raceways (0.023 vs 0.013 g L-1day-1), areal biomass productivities were of similar magnitude in both pond systems (3.34 vs. 3.47 g m-2day-1), suggesting that the ARID pond design has to be further optimized, most likely by increasing the culture depth or operating at higher cell densities while maintaining adequate mixing.

Crowe, Braden J.; Attalah, Said; Agrawal, Shweta; Waller, Peter; Ryan, Randy; Van Wagenen, Jonathan M.; Chavis, Aaron R.; Kyndt, John; Kacira, Murat; Ogden, Kimberly L.; Huesemann, Michael H.

2012-10-01T23:59:59.000Z

260

Lighting Group: Controls: PIER Lighting Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

PIER Lighting Projects CEC Public Interest Energy Research (PIER) Projects Objective Lighting controls are often expensive, complex, hard to commission properly and difficult to...

Note: This page contains sample records for the topic "outdoor lighting mv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Architectural Lighting Analysis in Virtual Lighting Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Architectural Lighting Analysis in Virtual Lighting Laboratory NOTICE Due to the current lapse of federal funding, Berkeley Lab websites are accessible, but may not be updated...

262

Alcorn County Elec Power Assn | Open Energy Information  

Open Energy Info (EERE)

Power Assn Power Assn Jump to: navigation, search Name Alcorn County Elec Power Assn Place Mississippi Utility Id 276 Utility Location Yes Ownership C NERC Location SERC NERC SERC Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png General Service (1001 kW-5000 kW) Industrial General Service (50 kW and Under) Commercial General Service (51 kW-1000 kW) Industrial Outdoor Lighting HPS 100 W Lighting Outdoor Lighting HPS 250 W Lighting Outdoor Lighting MH 400 W Lighting Outdoor Lighting MV 175 W Lighting Residential Residential Average Rates Residential: $0.0959/kWh

263

Ozark Electric Coop Inc | Open Energy Information  

Open Energy Info (EERE)

Ozark Electric Coop Inc Ozark Electric Coop Inc Place Missouri Utility Id 14288 Utility Location Yes Ownership C NERC Location SERC NERC SERC Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Commercial Multi-Phase (Less Than 125 kW) Commercial Commercial Single-Phase Commercial Large Power (Industrial) Industrial Outdoor Lighting HPS 100 W Lighting Outdoor Lighting HPS 1000 W Lighting Outdoor Lighting MH 400 W Lighting Outdoor Lighting MV 175 W Lighting Residential Single Phase (Planned Subdivision) Residential Residential Single Phase (Under 75 kW) Residential

264

Tahlequah Public Works Auth | Open Energy Information  

Open Energy Info (EERE)

Tahlequah Public Works Auth Tahlequah Public Works Auth Jump to: navigation, search Name Tahlequah Public Works Auth Place Oklahoma Utility Id 18433 Utility Location Yes Ownership M NERC Location SPP NERC SPP Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Academic Commercial City Services Commercial Large Commercial LC-1 Commercial Large Commercial LC-2 Commercial Large Commercial LC-3 Commercial Northeastern State University Commercial Outdoor Lighting MH 400 W Lighting Outdoor Lighting MV 175 W Lighting Outdoor Lighting MV 250 W Lighting Residential Residential

265

Bath Electric Gas & Water Sys | Open Energy Information  

Open Energy Info (EERE)

Electric Gas & Water Sys Electric Gas & Water Sys Jump to: navigation, search Name Bath Electric Gas & Water Sys Place New York Utility Id 1343 Utility Location Yes Ownership M NERC Location NPCC NERC NPCC Yes ISO NY Yes Activity Buying Transmission Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Commercial (20 KW to 75 KW demand) Commercial Industrial (Over 75 KW demand) Industrial Outdoor Lighting (175W MV-150W HPS) Lighting Outdoor Lighting (250W HPS) Lighting Outdoor Lighting (400W MV/HPS) Lighting Residential Residential Small Commercial ( Under 20 KW demand) Commercial

266

Next Generation Light Source  

Next Generation Light Source Super Thin Light Bulb, Energy Efficient, Long Life, Dimmable, and Uniform Illumination High Entry Barrier 71 ...

267

First Light  

E-Print Network (OSTI)

The first dwarf galaxies, which constitute the building blocks of the collapsed objects we find today in the Universe, had formed hundreds of millions of years after the big bang. This pedagogical review describes the early growth of their small-amplitude seed fluctuations from the epoch of inflation through dark matter decoupling and matter-radiation equality, to the final collapse and fragmentation of the dark matter on all mass scales above \\~10^{-4} solar masses. The condensation of baryons into halos in the mass range of ~10^5-10^{10} solar masses led to the formation of the first stars and the re-ionization of the cold hydrogen gas, left over from the big bang. The production of heavy elements by the first stars started the metal enrichment process that eventually led to the formation of rocky planets and life. A wide variety of instruments currently under design [including large-aperture infrared telescopes on the ground or in space (JWST), and low-frequency arrays for the detection of redshifted 21cm radiation], will establish better understanding of the first sources of light during an epoch in cosmic history that was largely unexplored so far. Numerical simulations of reionization are computationally challenging, as they require radiative transfer across large cosmological volumes as well as sufficently high resolution to identify the sources of the ionizing radiation. The technological challenges for observations and the computational challenges for numerical simulations, will motivate intense work in this field over the coming decade.

Abraham Loeb

2006-03-14T23:59:59.000Z

268

Seeing the Light: LED Under-Cabinet and Recessed Downlights | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Seeing the Light: LED Under-Cabinet and Recessed Downlights Seeing the Light: LED Under-Cabinet and Recessed Downlights Seeing the Light: LED Under-Cabinet and Recessed Downlights August 2, 2010 - 10:42am Addthis Chris Stewart Senior Communicator at DOE's National Renewable Energy Laboratory I moved into my apartment about four years ago. Little by little, I've continued to make improvements that help me save money on my energy bills. I've: Applied weatherstripping to seal air leaks around windows Insulated my crawl space Installed storm windows to reduce air movement into and out of existing windows (I live in a historic district and can't replace my windows) Installed window shades to help with insulation Replaced my incandescent lighting fixtures with compact fluorescent lamps (CFLs) (I even purchased outdoor solar lights for my dad for Fathers Day.)

269

Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting Lighting Lighting When you're shopping for lightbulbs, compare lumens and use the Lighting Facts label to be sure you're getting the amount of light, or level of brightness, you want. You can save money and energy while lighting your home and still maintaining good light quantity and quality. Consider energy-efficient lighting options to use the same amount of light for less money. Learn strategies for comparing and buying lighting products and using them efficiently. Featured Lighting Choices to Save You Money Light your home for less money while using the same amount of light. How Energy-Efficient Light Bulbs Compare with Traditional Incandescents Energy-efficient light bulbs are available today and could save you about $50 per year in energy costs when you replace 15 traditional incandescent bulbs in your home.

270

Evaluation of surface sampling method performance for Bacillus Spores on clean and dirty outdoor surfaces.  

Science Conference Proceedings (OSTI)

Recovery of Bacillus atrophaeous spores from grime-treated and clean surfaces was measured in a controlled chamber study to assess sampling method performance. Outdoor surfaces investigated by wipe and vacuum sampling methods included stainless steel, glass, marble and concrete. Bacillus atrophaeous spores were used as a surrogate for Bacillus anthracis spores in this study designed to assess whether grime-coated surfaces significantly affected surface sampling method performance when compared to clean surfaces. A series of chamber tests were carried out in which known amounts of spores were allowed to gravitationally settle onto both clean and dirty surfaces. Reference coupons were co-located with test coupons in all chamber experiments to provide a quantitative measure of initial surface concentrations of spores on all surfaces, thereby allowing sampling recovery calculations. Results from these tests, carried out under both low and high humidity conditions, show that spore recovery from grime-coated surfaces is the same as or better than spore recovery from clean surfaces. Statistically significant differences between method performance for grime-coated and clean surfaces were observed in only about half of the chamber tests conducted.

Wilson, Mollye C.; Einfeld, Wayne; Boucher, Raymond M.; Brown, Gary Stephen; Tezak, Matthew Stephen

2011-06-01T23:59:59.000Z

271

Architectural Lighting Analysis in Virtual Lighting Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Architectural Lighting Analysis in Virtual Lighting Laboratory Architectural Lighting Analysis in Virtual Lighting Laboratory Speaker(s): Mehlika Inanici Date: July 7, 2003 - 12:00pm Location: Bldg. 90 Seminar Host/Point of Contact: Satkartar K. Kinney Virtual Lighting Laboratory is a Radiance-based lighting analysis tool and methodology that proposes transformations in the utilization of computer visualization in lighting analysis and design decision-making. It is a computer environment, where the user has been provided with matrices of illuminance and luminance values extracted from high dynamic range images. The principal idea is to provide the laboratory to the designer and researcher to explore various lighting analysis techniques instead of imposing limited number of predetermined metrics. In addition, it introduces an analysis approach for temporal and spatial lighting

272

New Light Sources for Tomorrow's Lighting Designs  

E-Print Network (OSTI)

The lighting industry is driven to provide light sources and lighting systems that, when properly applied, will produce a suitable luminous environment in which to perform a specified task. Tasks may include everything from office work, manufacturing and inspection to viewing priceless art objects, selecting the right chair for your living room, and deciding which produce item to select for tonight's dinner. While energy efficiency is a major consideration in any new lighting system design, the sacrifice of lighting quality may cost more in terms of lost productivity and user dissatisfaction than can ever be saved on that monthly energy bill. During the past several years, many new light sources have been developed and introduced. These product introductions have not been limited to anyone lamp type, but instead may be found in filament, fluorescent and high intensity discharge lamp families. Manufacturers of light sources have two basic goals for new product development. These goals are high efficiency lighting and improved color rendering properties. High efficiency lighting may take the form of either increasing lamp efficiency (lumens of light delivered per watt of power consumed) or decreasing lamp size, thus making a more easily controlled light source that places light where it is needed. The manufacturer's second goal is to produce lamps that render colors accurately while maintaining high efficiency. This paper will discuss new introductions in light sources and lighting systems and how they may impact the design of luminous environments of the future.

Krailo, D. A.

1986-06-01T23:59:59.000Z

273

Laboratory Testing of the Heating Capacity of Air-Source Heat Pumps at Low Outdoor Temperature Conditions  

Science Conference Proceedings (OSTI)

Air-source heat pump systems offer an alternative to the common heating, ventilating, and air conditioning (HVAC) configuration of single split unitary air conditioners with gas heating. In simple terms, heat pumps are traditional air conditioning units with the added capability of running in reverse as required by the building load. Thus, where the traditional air conditioning unit has an indoor evaporator to remove heat from the space and an outdoor condenser to reject heat to the ambient environment, ...

2010-12-22T23:59:59.000Z

274

Lighting Options for Homes.  

SciTech Connect

This report covers many aspects of various lighting options for homes. Types of light sources described include natural light, artificial light, incandescent lamps, fluorescent lamps, and high intensity discharge lamps. A light source selection guide gives the physical characteristics of these, design considerations, and common applications. Color, strategies for efficient lighting, and types of lighting are discussed. There is one section giving tips for various situations in specific rooms. Rooms and types of fixtures are shown on a matrix with watts saved by using the recommended type lighting for that room and room location. A major emphasis of this report is saving energy by utilizing the most suitable, recommended lighting option. (BN)

Baker, W.S.

1991-04-01T23:59:59.000Z

275

Mobile lighting apparatus  

DOE Patents (OSTI)

A mobile lighting apparatus includes a portable frame such as a moveable trailer or skid having a light tower thereon. The light tower is moveable from a stowed position to a deployed position. A hydrogen-powered fuel cell is located on the portable frame to provide electrical power to an array of the energy efficient lights located on the light tower.

Roe, George Michael; Klebanoff, Leonard Elliott; Rea, Gerald W; Drake, Robert A; Johnson, Terry A; Wingert, Steven John; Damberger, Thomas A; Skradski, Thomas J; Radley, Christopher James; Oros, James M; Schuttinger, Paul G; Grupp, David J; Prey, Stephen Carl

2013-05-14T23:59:59.000Z

276

Data Analysis and Modeling of Lighting Energy Use in Large Office Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Data Analysis and Modeling of Lighting Energy Use in Large Office Buildings Data Analysis and Modeling of Lighting Energy Use in Large Office Buildings Title Data Analysis and Modeling of Lighting Energy Use in Large Office Buildings Publication Type Conference Paper Year of Publication 2013 Authors Zhou, Xin, Da Yan, Xiaoxin Ren, and Tianzhen Hong Keywords building simulation, energy use, lighting, modeling, occupant beh building, occupant beh building simulation, occupant behbuilding simulation Abstract Lighting consumes about 20 to 40% of total electricity use in large office buildings in the U.S. and China. In order to develop better lighting simulation models it is crucial to understand the characteristics of lighting energy use. This paper analyzes the main characteristics of lighting energy use over various time scales, based on the statistical analysis of measured lighting energy use of 17 large office buildings in Beijing and Hong Kong. It was found that the daily 24-hour variations of lighting energy use were mainly driven by the schedule of the building occupants. Outdoor illumination levels have little impact on lighting energy use in large office buildings due to the lack of automatic daylighting controls and relatively small perimeter areas. A stochastic lighting energy use model was developed based on different occupant activities during six time periods throughout a day, and the annual distribution of lighting power across those periods. The model was verified using measured lighting energy use of one selected building. This study demonstrates how statistical analysis and stochastic modeling can be applied to lighting energy use. The developed lighting model can be adopted by building energy modeling programs to improve the simulation accuracy of lighting energy use.

277

Geometry-dependent lighting  

E-Print Network (OSTI)

Abstract In this paper we introduce geometrydependent lighting that allows lighting parameters to be defined independently and possibly discrepantly over an object or scene based on the local geometry. We present and discuss Light Collages, a lighting design system with geometry-dependent lights for effective feature-enhanced visualization. Our algorithm segments the objects into local surface patches and places lights that are locally consistent but globally discrepant to enhance the perception of shape. We use spherical harmonics for efficiently storing and computing light placement and assignment. We also outline a method to find the minimal number of light sources sufficient to illuminate an object well with our globally discrepant lighting approach. Index Terms Lighting design, scientific illustration, discrepant lighting, light placement, silhouette enhancement, proximity shadows, spherical harmonics I.

Chang Ha Lee; Xuejun Hao; Amitabh Varshney

2005-01-01T23:59:59.000Z

278

Lighting Group: What's New  

NLE Websites -- All DOE Office Websites (Extended Search)

What's New What's New in the Lighting Group For more information on what's new in the Lighting Group, please contact: Francis Rubinstein Lighting Group Leader (510) 486-4096...

279

Light in the city  

E-Print Network (OSTI)

This thesis focuses on enhancing the awareness of light for the pedestrian,and using light as a way of revealing the structure of the city and its relation to the cosmos. It proposes that aesthetic qualities of light inform ...

Srinivasan, Kavita, 1976-

2002-01-01T23:59:59.000Z

280

Specific light in sculpture  

E-Print Network (OSTI)

Specific light is defined as light from artificial or altered natural sources. The use and manipulation of light in three dimensional sculptural work is discussed in an historic and contemporary context. The author's work ...

Powell, John William

1989-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "outdoor lighting mv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Energy_Savings_Light_Emitting_Diodes_Niche_Lighting_Apps.pdf...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EnergySavingsLightEmittingDiodesNicheLightingApps.pdf EnergySavingsLightEmittingDiodesNicheLightingApps.pdf EnergySavingsLightEmittingDiodesNicheLightingApps.p...

282

Prospects for LED lighting.  

SciTech Connect

Solid-state lighting using light-emitting diodes (LEDs) has the potential to reduce energy consumption for lighting by 50% while revolutionizing the way we illuminate our homes, work places, and public spaces. Nevertheless, substantial technical challenges remain in order for solid-state lighting to significantly displace the well-developed conventional lighting technologies. We review the potential of LED solid-state lighting to meet the long-term cost goals.

Tsao, Jeffrey Yeenien; Gee, James Martin; Simmons, Jerry Alvon

2003-08-01T23:59:59.000Z

283

Lighting Control Systems  

Science Conference Proceedings (OSTI)

The demand for lighting control systems in residential, commercial, and industrial facilities is on the rise with the demand for increased energy savings. With lighting accounting for almost 23% of grid load, there is significant opportunity to reduce lighting load while improving the quality of light for customers. Lighting control systems are becoming more intelligent as the need for them to interface with building control systems and demand response systems also increases. Lighting control systems use...

2009-12-17T23:59:59.000Z

284

Composite Lighting Simulations with Lighting Networks  

E-Print Network (OSTI)

A whole variety of different techniques for simulating global illumination in virtual environments have been developed over recent years. Each technique, including Radiosity, Monte-Carlo ray- or photon tracing, and directional-dependent Radiance computations, is best suited for simulating only some special case environments. None of these techniques is currently able to efficiently simulate all important lighting effects in non-trivial scenes. In this paper, we describe a new approach for efficiently combining different global illumination algorithms to yield a composite lighting simulation: Lighting Networks. Lighting Networks can exploit the advantages of each algorithm and can combine them in such a way as to simulate lighting effects that could only be computed at great costs by any single algorithm. Furthermore, this approach allows a user to configure the Lighting Network to compute only specific lighting effects that are important for a given task, while avoiding a costly simulation of the full global illumination in a scene. We show how the light paths computed by a Lighting Network can be described using regular expressions. This mapping allows us to analyze the composite lighting simulation and ensure completeness and redundant-free computations. Several examples demonstrate the advantages and unique lighting effects that can be obtained using this technique. 1

Philipp Slusallek; Marc Stamminger; Wolfgang Heidrich; Jan-Christian Popp; Hans-peter Seidel

1998-01-01T23:59:59.000Z

285

Exhibit F-3  

U.S. Energy Information Administration (EIA) Indexed Site

on All Night Outdoor Lights with a Timer, Motion Sensor, or Photosensor Outdoor Gas Light High Intensity Discharge (HID) Outdoor Lights (Such as metal halide or high pressure...

286

Lighting Group: Links  

NLE Websites -- All DOE Office Websites (Extended Search)

Links Links Links Organizations Illuminating Engineering Society of North America (IESNA) International Commission on Illumination (CIE) International Association of Lighting Designers (IALD) International Association of Energy-Efficient Lighting Lightfair International Energy Agency - Task 21: Daylight in Buildings: Design Tools and Performance Analysis International Energy Agency - Task 31: Daylighting Buildings in 21st Century National Association on Qualifications for the Lighting Professions (NCQLP) National Association of Independent Lighting Distributors (NAILD) International Association of Lighting Management Companies (NALMCO) Research Centers California Lighting Technology Center Lighting Research Center Lighting Research at Canada Institute for Research in Construction

287

Advanced Demand Responsive Lighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Demand Demand Responsive Lighting Host: Francis Rubinstein Demand Response Research Center Technical Advisory Group Meeting August 31, 2007 10:30 AM - Noon Meeting Agenda * Introductions (10 minutes) * Main Presentation (~ 1 hour) * Questions, comments from panel (15 minutes) Project History * Lighting Scoping Study (completed January 2007) - Identified potential for energy and demand savings using demand responsive lighting systems - Importance of dimming - New wireless controls technologies * Advanced Demand Responsive Lighting (commenced March 2007) Objectives * Provide up-to-date information on the reliability, predictability of dimmable lighting as a demand resource under realistic operating load conditions * Identify potential negative impacts of DR lighting on lighting quality Potential of Demand Responsive Lighting Control

288

Light Laboratory, Inc.  

Science Conference Proceedings (OSTI)

... 12) Solid State Lighting Luminaires - Color Characteristic Measurements. [22/S04] IES LM-16:1993 Practical Guide to Colorimetry of Light Sources. ...

2013-07-26T23:59:59.000Z

289

Hubbell Lighting Photometric Laboratory  

Science Conference Proceedings (OSTI)

... 12) Solid State Lighting Luminaires - Color Characteristic Measurements. [22/S04] IES LM-16:1993 Practical Guide to Colorimetry of Light Sources. ...

2013-07-26T23:59:59.000Z

290

Energy Efficient Lighting Products  

Science Conference Proceedings (OSTI)

... Road Vista, San Diego, CA [200823- 0] Light Laboratory, Inc ... GA. CSA Group, Alpharetta, GA [200732- 0] Cooper Lighting Photometric Laboratory ...

2013-07-26T23:59:59.000Z

291

Light Metals 2010  

Science Conference Proceedings (OSTI)

Feb 1, 2010 ... Softcover book: Light Metals 2008 Volume 2: Aluminum Reduction. Hardcover book and CD-ROM: Light Metals 2009...

292

Plant and Lighting  

NLE Websites -- All DOE Office Websites (Extended Search)

publicationshouseplantligh t.html Sincerely, Anthony R. Brach "Artificial" light comes from many kinds of bulbs that emit different wavelengths of light; Many plants...

293

National Synchrotron Light Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Angle Limit," Phys. Rev. Lett., 99: 134801 (2007). 33 Researchers Produce Firsts with Bursts of Light BNL researchers have generated extremely short pulses of light that are the...

294

Lighting and Daylighting Basics  

Energy.gov (U.S. Department of Energy (DOE))

Buildings can be lit in two ways: by using artificial lighting, or by using daylighting, or the process of using natural sunlight, windows, and skylights to provide lighting.

295

Lighting | Open Energy Information  

Open Energy Info (EERE)

Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon Lighting Jump to: navigation, search TODO: Add description List of Lighting Incentives...

296

Lighting Systems Test Facilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Measurement equipment with light beam Lighting Systems Test Facilities NOTICE Due to the current lapse of federal funding, Berkeley Lab websites are accessible, but may not be...

297

Lighting and Daylighting  

Energy.gov (U.S. Department of Energy (DOE))

Buildings can be lit in two ways: by using artificial lighting, or by using daylighting, or the process of using natural sunlight, windows, and skylights to provide lighting.

298

Looking For Light.  

E-Print Network (OSTI)

??In my search for the way light can dictate the overall expression of an image, I have found that light is the means that activates (more)

Lindholm, Kevin R.

2010-01-01T23:59:59.000Z

299

LBNL Lighting Research Group  

NLE Websites -- All DOE Office Websites (Extended Search)

LED and ballast berkeley lamp workstation light switch Overview | What's New | Publications | Software | Facilities | People | Contact Us | Links Sources and Ballasts | Light...

300

Properties of Light  

Science Conference Proceedings (OSTI)

... Scattering of Light. Exploration: Sunset in a glass. ... How would you design a camera that could see through a sand storm? Invisible Light. ...

2012-03-23T23:59:59.000Z

Note: This page contains sample records for the topic "outdoor lighting mv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Cree LED Lighting Solutions Formerly LED Lighting Fixtures LLF...  

Open Energy Info (EERE)

Cree LED Lighting Solutions Formerly LED Lighting Fixtures LLF Jump to: navigation, search Name Cree LED Lighting Solutions (Formerly LED Lighting Fixtures (LLF)) Place...

302

Data:8abdc5cf-7878-46b3-8ab5-d03cf4c30cdb | Open Energy Information  

Open Energy Info (EERE)

abdc5cf-7878-46b3-8ab5-d03cf4c30cdb abdc5cf-7878-46b3-8ab5-d03cf4c30cdb No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Leavenworth-Jefferson E C, Inc Effective date: 2010/05/01 End date if known: Rate name: Outdoor Area Lighting Service (MV 400 W) Sector: Lighting Description: Available for outdoor lighting service to individual consumers where service can be supplied from existing facility of the cooperative. Outdoor Area Lighting Service (MV 400 W) Source or reference: Rate Binder #7 (Illinois State University) Source Parent: Comments Applicability Demand (kW) Minimum (kW): Maximum (kW): History (months):

303

Incandescent Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Incandescent Lighting Incandescent Lighting August 16, 2013 - 10:00am Addthis Incandescent lighting is the most common type of lighting used in homes. Incandescent lamps operate...

304

Solid-State Lighting: Registration  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting: Registration on Twitter Bookmark Solid-State Lighting: Registration on Google Bookmark Solid-State Lighting: Registration on Delicious Rank Solid-State Lighting:...

305

Solid-State Lighting: Postings  

NLE Websites -- All DOE Office Websites (Extended Search)

Solid-State Lighting: Postings on Twitter Bookmark Solid-State Lighting: Postings on Google Bookmark Solid-State Lighting: Postings on Delicious Rank Solid-State Lighting:...

306

Lighting Research Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting Research Group overview what's new publications software facilities people contact us links...

307

Results of First Outdoor Comparison Between Absolute Cavity Pyrgeometer (ACP) and Infrared Integrating Sphere (IRIS) Radiometer at PMOD (Presentation)  

DOE Green Energy (OSTI)

The ACP and IRIS are developed to establish a world reference for calibrating pyrgeometers with traceability to SI units. The two radiometers are unwindowed with negligible spectral dependence, and traceable to SI units through the temperature scale (ITS-90). The first outdoor comparison between the two designs was held from January 28 to February 8, 2013 at the Physikalisch-Metorologisches Observatorium Davos (PMOD). The difference between the irradiance measured by ACP and that of IRIS was within 1 W/m2. A difference of 5 W/m2 was observed between the irradiance measured by ACP&IRIS and that of the interim World Infrared Standard Group (WISG).

Reda, I.; Grobner, J.; Wacker, S.; Stoffel, T.

2013-03-01T23:59:59.000Z

308

Absolute Cavity Pyrgeometer to Measure the Absolute Outdoor Longwave Irradiance with Traceability to International System of Units, SI  

SciTech Connect

This article describes a method of measuring the absolute outdoor longwave irradiance using an absolute cavity pyrgeometer (ACP), U.S. Patent application no. 13/049, 275. The ACP consists of domeless thermopile pyrgeometer, gold-plated concentrator, temperature controller, and data acquisition. The dome was removed from the pyrgeometer to remove errors associated with dome transmittance and the dome correction factor. To avoid thermal convection and wind effect errors resulting from using a domeless thermopile, the gold-plated concentrator was placed above the thermopile. The concentrator is a dual compound parabolic concentrator (CPC) with 180{sup o} view angle to measure the outdoor incoming longwave irradiance from the atmosphere. The incoming irradiance is reflected from the specular gold surface of the CPC and concentrated on the 11 mm diameter of the pyrgeometer's blackened thermopile. The CPC's interior surface design and the resulting cavitation result in a throughput value that was characterized by the National Institute of Standards and Technology. The ACP was installed horizontally outdoor on an aluminum plate connected to the temperature controller to control the pyrgeometer's case temperature. The responsivity of the pyrgeometer's thermopile detector was determined by lowering the case temperature and calculating the rate of change of the thermopile output voltage versus the changing net irradiance. The responsivity is then used to calculate the absolute atmospheric longwave irradiance with an uncertainty estimate (U{sub 95}) of {+-}3.96 W m{sup 02} with traceability to the International System of Units, SI. The measured irradiance was compared with the irradiance measured by two pyrgeometers calibrated by the World Radiation Center with traceability to the Interim World Infrared Standard Group, WISG. A total of 408 readings were collected over three different nights. The calculated irradiance measured by the ACP was 1.5 W/m{sup 2} lower than that measured by the two pyrgeometers that are traceable to WISG, with a standard deviation of {+-}0.7 W m{sup -2}. These results suggest that the ACP design might be used for addressing the need to improve the international reference for broadband outdoor longwave irradiance measurements.

Reda, I.; Zeng, J.; Scheuch, J.; Hanssen, L.; Wilthan, B.; Myers, D.; Stoffel, T.

2012-03-01T23:59:59.000Z

309

Energy and lighting decisions  

SciTech Connect

This report reviews the fundamental principles of lighting and uses them to evaluate energy-conserving lighting equipment and techniques. The selection of the proper lighting components and systems is complex, requiring a knowledge of the characteristics of light sources and their interactions with the auxiliary equipment and the environment. Furthermore, there are subjective aspects of lighting that are difficult to quantify. We address the simplistic way in which lighting is commonly approached, then present an argument as to the critical nature of the lighting decision. In the final sections we discuss and evaluate lighting equipment in terms of its applications and characteristics. Familiarity with the fundamental characteristics of the elements of lighting equipment will also permit more judicious appraisal and use of lighting concepts that may be introduced in the future. 6 figs., 9 tabs.

Verderber, R.R.

1986-06-01T23:59:59.000Z

310

Lighting Inventory Lighting Theatre and Drama  

E-Print Network (OSTI)

Strand Basic Palette 400 channel 800 attrib. 1 Strand Lighting 200 Series 24/48 1 1 MicroVision 2 HORIZON

Indiana University

311

Lighting Retrofit Study  

SciTech Connect

The Lighting Retrofit Study was an effort to determine the most cost-effective methods of retrofitting several configurations of lighting systems at Lawrence Berkeley Laboratory (LBL) and Lawrence Livermore National Laboratory (LLNL). We developed a test protocol to compare a variety of lighting technologies for their applicability in labs and offices and designed and constructed a novel lighting contrast potential meter to allow for comparison of lighting quality as well as quantity.

Kromer, S.; Morse, O.; Siminovitch, M.

1991-09-01T23:59:59.000Z

312

EK101 Engineering Light Smart Lighting  

E-Print Network (OSTI)

represents high usage of an engine and the violet end represents low usage. A light blue coloring represents from red to light blue), and slowly increase their usage of engine A. The seventh row show a patternModeling Long-Term Search Engine Usage Ryen W. White, Ashish Kapoor, and Susan T. Dumais Microsoft

Bifano, Thomas

313

Spectrally Enhanced Lighting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

November 2007 November 2007 AfterImage + s p a c e 1 Spectrally Enhanced Lighting Spectrally Enhanced Lighting Brian Liebel, PE, LC Brian Liebel, PE, LC November 29, 2007 November 29, 2007 Federal Utilities Partnership Working Group Federal Utilities Partnership Working Group November 29, 2007 November 29, 2007 29 November 2007 AfterImage + s p a c e 2 Spectrally Enhanced Lighting Spectrally Enhanced Lighting Spectrally Enhanced Lighting Spectrally Enhanced Lighting This is not a technology; just a This is not a technology; just a different way to quantify light based on different way to quantify light based on well established scientific findings well established scientific findings Can be used in conjunction with ANY Can be used in conjunction with ANY type of lighting design to gain

314

Outdoor Testing of GaInP2/GaAs Tandem Cells with Top Cell Thickness Varied  

DOE Green Energy (OSTI)

In this study, we measure the performance of GaInP2/GaAs tandem cells under direct beam sunlight outdoors in order to quantify their sensitivity to both spectral variation and GaInP2 top-cell thickness. A set of cells with five different top-cell thicknesses was mounted on a two-axis tracker with the incident sunlight collimated to exclude all except the direct beam. Current-voltage (I-V) curves were taken throughout the course of several days, along with measurements of the direct solar spectrum. Our two major conclusions are: (1) GaInP2/GaAs tandem cells designed for either the ASTM G-173 direct (G-173D) spectrum or the "air mass 1.5 global" (AM1.5G) spectrum perform the best, and (2) cells can be characterized indoors and modeled using outdoor spectra with the same result. These results are equally valid for GaInP2/GaAs/Ge triple-junction cells.

McMahon, W. E.; Emergy, K. E.; Friedman, D. J.; Ottoson, L.; Young, M. S.; Ward, J. S.; Kramer, C. M.; Duda, A.; Kurtz, S.

2005-08-01T23:59:59.000Z

315

Arnold Schwarzenegger LIGHTING RESEARCH PROGRAM  

E-Print Network (OSTI)

on accelerating products toward effective market preparation and entry. The MC project, led by Bevilacqua Knight is organized as follows: · Section 1.0 Introduction provides the background and rationale that led the Energy, and building relationships. For example, work on the CFL downlight and lightemitting diode (LED) outdoor

316

LED Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

LED Lighting LED Lighting August 16, 2013 - 10:07am Addthis Light-emitting diodes (LEDs) are light sources that differ from more traditional sources of light in that they are...

317

Natural lighting and skylights  

E-Print Network (OSTI)

There are many physiological and psychological factors which enter into the proper design of space for human occupancy. One of these elements is light. Both natural light and manufactured light are basic tools with which any designer must work. However, they are only two of the many, many elements which must be considered; and they, therefore, must be considered, always, in relation to the other elements. The achievement of good lighting depends on a reasonable understanding of three primary factors: one, the visual response to lighting; two, the availability and types of lighting; and three, methods for controlling light. This thesis is intended to supply enough information to provide a working knowledge of each of these facets. The human visual response is discussed in "Goals For Good Lighting." The availability and types of lighting are dealt with in the section on available light. The remainder of the thesis concerns methods for controlling light. The use of scale models for studying the natural lighting characteristics of buildings due to the building geometry, the fenestration details and the interior reflectance has been well established as pointed out in the earlier part of this thesis. With the completion of the work outlined herein, the feasibility of using scale models for studying skylights is also an established fact. The method of analysis by models can be a valuable tool to any designer who is concerned about day-lighting.

Evans, Benjamin Hampton

1961-01-01T23:59:59.000Z

318

Lighting Group: Overview  

NLE Websites -- All DOE Office Websites (Extended Search)

Overview Overview Overview of the Lighting Research Group The Lighting Research Group at Lawrence Berkeley National Laboratory performs research aimed at improving the energy efficiency of lighting systems in buildings and homes, throughout the State of California and across the Nation. The goal is to reduce lighting energy consumption by 50% over twenty years by improving the efficiency of light sources, and controlling and delivering illumination so that it is available, where and when needed, and at the required intensity. Research in the Lighting Group falls into three main areas: Sources and Ballasts, Light Distribution Systems and Controls and Communications. Click on a link below for more information about each of these research areas. Sources and Ballasts investigates next generation light sources, such as

319

Madrid Electric Lighting Report  

NLE Websites -- All DOE Office Websites (Extended Search)

Electric Lighting Quality Page 1 of 2 ELECTRIC LIGHTING QUALITY MAGIC BOX is a versatile home. Its design allows to change the room size by opening and closing the movable walls...

320

Automatic lighting controls demonstration  

SciTech Connect

The purpose of this work was to demonstrate, in a real building situation, the energy and peak demand reduction capabilities of an electronically ballasted lighting control system that can utilize all types of control strategies to efficiently manage lighting. The project has demonstrated that a state-of-the-art electronically ballasted dimmable lighting system can reduce energy and lighting demand by as least 50% using various combinations of control strategies. By reducing light levels over circulation areas (tuning) and reducing after hours light levels to accommodate the less stringent lighting demands of the cleaning crew (scheduling), lighting energy consumption on weekdays was reduced an average of 54% relative to the initial condition. 10 refs., 14 figs., 3 tabs.

Rubinstein, F.; Verderber, R.

1990-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "outdoor lighting mv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Lighting energy audit workbook  

SciTech Connect

A simple test to determine the need for a lighting energy audit is followed by how-to information on conducting the audit, identifying savings opportunities, and developing an energy management plan for lighting.

1984-01-01T23:59:59.000Z

322

Inverse Lighting for Photography  

E-Print Network (OSTI)

We introduce a technique for improving photographs using inverse lighting, a new process based on algorithms developed in computer graphics for computing the reflection of light in 3D space. From a photograph and a 3D surface model for the object pictured, inverse lighting estimates the directional distribution of the incident light. We then use this information to process the photograph digitally to alter the lighting on the object. Inverse lighting is a specific example of the general idea of inverse rendering. This refers to the practice of using the methods of computer graphics, which normally are used to render images from scene information, to infer scene information from images. Our system uses physically based rendering technology to construct a linear least squares system that we solve to find the lighting. As an application, the results are then used to simulate a change in the incident light in the photograph. An implementation is described that uses 3D models from a laser...

Stephen R. Marschner; Donald P. Greenberg

1997-01-01T23:59:59.000Z

323

Fast Light, Fast Neutrinos?  

E-Print Network (OSTI)

Light has been observed with group velocities both faster and slower than the speed of light. The recent report from OPERA of superluminal 17 GeV neutrinos may describe a similar phenomenon.

Cahill, Kevin

2011-01-01T23:59:59.000Z

324

Light Wavelength and Plants  

NLE Websites -- All DOE Office Websites (Extended Search)

Light Wavelength and Plants Name: John Location: NA Country: NA Date: NA Question: I just was wandering whether plants grow better in artificial light or in sunlight. I am...

325

Germinating and Light  

NLE Websites -- All DOE Office Websites (Extended Search)

Germinating and Light Name: Chris Location: NA Country: NA Date: NA Question: Can you tell me how plants determine where the light is once they are out of the soil and not a...

326

PFP Emergency Lighting Study  

SciTech Connect

NFPA 101, section 5-9 mandates that, where required by building classification, all designated emergency egress routes be provided with adequate emergency lighting in the event of a normal lighting outage. Emergency lighting is to be arranged so that egress routes are illuminated to an average of 1.0 footcandle with a minimum at any point of 0.1 footcandle, as measured at floor level. These levels are permitted to drop to 60% of their original value over the required 90 minute emergency lighting duration after a power outage. The Plutonium Finishing Plant (PFP) has two designations for battery powered egress lights ''Emergency Lights'' are those battery powered lights required by NFPA 101 to provide lighting along officially designated egress routes in those buildings meeting the correct occupancy requirements. Emergency Lights are maintained on a monthly basis by procedure ZSR-12N-001. ''Backup Lights'' are battery powered lights not required by NFPA, but installed in areas where additional light may be needed. The Backup Light locations were identified by PFP Safety and Engineering based on several factors. (1) General occupancy and type of work in the area. Areas occupied briefly during a shiftly surveillance do not require backup lighting while a room occupied fairly frequently or for significant lengths of time will need one or two Backup lights to provide general illumination of the egress points. (2) Complexity of the egress routes. Office spaces with a standard hallway/room configuration will not require Backup Lights while a large room with several subdivisions or irregularly placed rooms, doors, and equipment will require Backup Lights to make egress safer. (3) Reasonable balance between the safety benefits of additional lighting and the man-hours/exposure required for periodic light maintenance. In some plant areas such as building 236-Z, the additional maintenance time and risk of contamination do not warrant having Backup Lights installed in all rooms. Sufficient light for egress is provided by existing lights located in the hallways.

BUSCH, M.S.

2000-02-02T23:59:59.000Z

327

TMS Light Metals Publication  

Science Conference Proceedings (OSTI)

The following instructions should be used when submitting a manuscript for any TMS Light Metals proceedings volume. INTRODUCTION. Orientation to...

328

Solid-State Lighting: Solid-State Lighting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Solid-State Lighting Search Solid-State Lighting Search Search Help Solid-State Lighting HOME ABOUT THE PROGRAM R&D PROJECTS MARKET-BASED PROGRAMS SSL BASICS INFORMATION RESOURCES FINANCIAL OPPORTUNITIES EERE » Building Technologies Office » Solid-State Lighting Printable Version Share this resource Send a link to Solid-State Lighting: Solid-State Lighting to someone by E-mail Share Solid-State Lighting: Solid-State Lighting on Facebook Tweet about Solid-State Lighting: Solid-State Lighting on Twitter Bookmark Solid-State Lighting: Solid-State Lighting on Google Bookmark Solid-State Lighting: Solid-State Lighting on Delicious Rank Solid-State Lighting: Solid-State Lighting on Digg Find More places to share Solid-State Lighting: Solid-State Lighting on AddThis.com... Pause/Resume Photo of a large room with people standing around poster boards.

329

Lighting management casebook  

SciTech Connect

Fifteen examples illustrate how lighting system projects can save energy as well as improve productivity and safety. The case histories include the use of programmable lighting, fiber optics, skylights, voltage reduction, ultrasonic and infrared sensors, and other strategies for improving lighting efficiency. Each case history includes the management approach, site information, and applications. (DCK)

1982-06-01T23:59:59.000Z

330

Advanced Lighting Guidelines  

Science Conference Proceedings (OSTI)

Information about energy-effective lighting technologies is required to be updated as old technologies become obsolete and new technologies begin to make important market impacts. Providing a comprehensive, state-of-the-art update of lighting technology application and information is necessary to ensure that lighting decision-makers have the best possible information available at all times.

2001-10-22T23:59:59.000Z

331

Energy and lighting design  

SciTech Connect

Energy conserving practices in providing lighting for today's buildings are examined in this second of a two-part presentation. Discussion on light source characteristics, ballast characteristics for gaseous discharge lamps, quality and the cost of lighting, and equivalent sphere illumination are included.

Helms, R.N.

1979-12-01T23:59:59.000Z

332

Resonant energy transfer in light harvesting and light emitting applications.  

E-Print Network (OSTI)

??The performance of light emitting and light harvesting devices is improved by utilising resonant energy transfer. In lighting applications, the emission energy of a semiconductor (more)

Chanyawadee, Soontorn

2009-01-01T23:59:59.000Z

333

LIGHT FORCE: An Exploration of Light through Design.  

E-Print Network (OSTI)

??What falls into the realm of light and what it means to design and the human experience? Can light be material? How does light change (more)

Chen, Tzu

2007-01-01T23:59:59.000Z

334

Solid-State Lighting: Webcast: Evaluating LED Street Lighting...  

NLE Websites -- All DOE Office Websites (Extended Search)

Webcast: Evaluating LED Street Lighting Solutions to someone by E-mail Share Solid-State Lighting: Webcast: Evaluating LED Street Lighting Solutions on Facebook Tweet about...

335

Lighting Group: Sources and Ballasts: LED Task Light  

NLE Websites -- All DOE Office Websites (Extended Search)

light The goal of this project is to accelerate the use of energy efficient light emitting diode (LED) technology for general lighting applications by developing a task lamp...

336

Solid-State Lighting: Solid-State Lighting Videos  

NLE Websites -- All DOE Office Websites (Extended Search)

Solid-State Lighting Videos to Solid-State Lighting Videos to someone by E-mail Share Solid-State Lighting: Solid-State Lighting Videos on Facebook Tweet about Solid-State Lighting: Solid-State Lighting Videos on Twitter Bookmark Solid-State Lighting: Solid-State Lighting Videos on Google Bookmark Solid-State Lighting: Solid-State Lighting Videos on Delicious Rank Solid-State Lighting: Solid-State Lighting Videos on Digg Find More places to share Solid-State Lighting: Solid-State Lighting Videos on AddThis.com... Conferences & Meetings Presentations Publications Webcasts Videos Tools Solid-State Lighting Videos On this page you can access DOE Solid-State Lighting (SSL) Program videos. Photo of a museum art gallery with LED lights in track fixtures overhead. The City of Los Angeles LED Streetlight Program

337

Solid-State Lighting: Solid-State Lighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting Lighting Printable Version Share this resource Send a link to Solid-State Lighting: Solid-State Lighting to someone by E-mail Share Solid-State Lighting: Solid-State Lighting on Facebook Tweet about Solid-State Lighting: Solid-State Lighting on Twitter Bookmark Solid-State Lighting: Solid-State Lighting on Google Bookmark Solid-State Lighting: Solid-State Lighting on Delicious Rank Solid-State Lighting: Solid-State Lighting on Digg Find More places to share Solid-State Lighting: Solid-State Lighting on AddThis.com... Pause/Resume Photo of a large room with people standing around poster boards. Register Now for DOE's 11th Annual SSL R&D Workshop January 28-30, join other SSL R&D professionals from industry, government, and academia to learn, share, and shape the future of lighting.

338

Solid-State Lighting: Solid-State Lighting Contacts  

NLE Websites -- All DOE Office Websites (Extended Search)

About the About the Program Printable Version Share this resource Send a link to Solid-State Lighting: Solid-State Lighting Contacts to someone by E-mail Share Solid-State Lighting: Solid-State Lighting Contacts on Facebook Tweet about Solid-State Lighting: Solid-State Lighting Contacts on Twitter Bookmark Solid-State Lighting: Solid-State Lighting Contacts on Google Bookmark Solid-State Lighting: Solid-State Lighting Contacts on Delicious Rank Solid-State Lighting: Solid-State Lighting Contacts on Digg Find More places to share Solid-State Lighting: Solid-State Lighting Contacts on AddThis.com... Contacts Partnerships Solid-State Lighting Contacts For information about Solid-State Lighting, contact James Brodrick Lighting Program Manager Building Technologies Office U.S. Department of Energy

339

Solid-State Lighting: Adaptive Street Lighting Controls  

NLE Websites -- All DOE Office Websites (Extended Search)

Adaptive Street Lighting Adaptive Street Lighting Controls to someone by E-mail Share Solid-State Lighting: Adaptive Street Lighting Controls on Facebook Tweet about Solid-State Lighting: Adaptive Street Lighting Controls on Twitter Bookmark Solid-State Lighting: Adaptive Street Lighting Controls on Google Bookmark Solid-State Lighting: Adaptive Street Lighting Controls on Delicious Rank Solid-State Lighting: Adaptive Street Lighting Controls on Digg Find More places to share Solid-State Lighting: Adaptive Street Lighting Controls on AddThis.com... Conferences & Meetings Presentations Publications Webcasts Videos Tools Adaptive Street Lighting Controls This two-part DOE Municipal Solid-State Street Lighting Consortium webinar focused on LED street lighting equipped with adaptive control components.

340

Emerging Lighting Technology  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Emerging Lighting Technology Emerging Lighting Technology Bruce Kinzey Pacific Northwest National Laboratory FUPWG - Portland, OR April 20, 2011 www.ssl.energy.gov 2 | Solid-State Lighting Program GATEWAY Demonstration Program * Purpose: demonstrate new SSL products in real-world applications that save energy, match or improve illumination, and are cost- effective * Demos generate critical field experience providing: - Feedback to manufacturers - Data for utility incentives - Market readiness of specific applications to users - Advancement in lighting knowledge Central Park, NY Photo: Ryan Pyle Smithsonian American Art Museum, Washington, D.C. Photo: Scott Rosenfeld www.ssl.energy.gov 3 | Solid-State Lighting Program LED Product Explosion www.ssl.energy.gov 4 | Solid-State Lighting Program LEDs are Not a Universal Lighting

Note: This page contains sample records for the topic "outdoor lighting mv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Industrial lighting handbook  

SciTech Connect

Technological advances in industrial lighting system components now make it possible to reduce lighting system consumption by up to 50% or more without loss of the benefits inherent in good quality electric illumination. Management involvement in decisions about industrial lighting is essential, however, and this document provides generalized information in lay terms to help decision-makers become familiar with the concerns that affect industrial environment and the financial well-being of their companies. The five sections (1) discuss the benefits of good lighting, (2) review certain major lighting issues and terms, (3) identify procedures for developing a lighting energy management plan, (4) identify lighting energy management options (LEMOs), and (5) discuss sources of assistance. 19 figures, 8 tables.

1985-01-01T23:59:59.000Z

342

Photonic crystal light source  

DOE Patents (OSTI)

A light source is provided by a photonic crystal having an enhanced photonic density-of-states over a band of frequencies and wherein at least one of the dielectric materials of the photonic crystal has a complex dielectric constant, thereby producing enhanced light emission at the band of frequencies when the photonic crystal is heated. The dielectric material can be a metal, such as tungsten. The spectral properties of the light source can be easily tuned by modification of the photonic crystal structure and materials. The photonic crystal light source can be heated electrically or other heating means. The light source can further include additional photonic crystals that exhibit enhanced light emission at a different band of frequencies to provide for color mixing. The photonic crystal light source may have applications in optical telecommunications, information displays, energy conversion, sensors, and other optical applications.

Fleming, James G. (Albuquerque, NM); Lin, Shawn-Yu (Albuquerque, NM); Bur, James A. (Corrales, NM)

2004-07-27T23:59:59.000Z

343

Advances in Lighting  

E-Print Network (OSTI)

Increasing electricity costs have made a significant impact on lighting. The Illuminating Engineering society (I.E.S.) and the lighting industry are producing new standards, procedures and products to make lighting more appropriate and energy efficient. This paper will describe the factors which affect the performance of lighting systems, introduce the new I.E.S. procedures for selecting illuminance values and lighting power limits, and illustrate some of the recent developments in the lighting industry. The importance of efficient lighting may be measured by the potential reduction in the electrical demand, and energy consumed. Since it also represents a visible use (or misuse) of energy, it may also reflect on other aspects of a company's energy management program.

Tumber, A. J.

1981-01-01T23:59:59.000Z

344

Evolution in lighting  

SciTech Connect

Lights consume 20-25% of the nation's electricity, establishing strong incentives to develop more efficient lighting strategies. Attention is turning to where, when, and how we light our environment, and the potential savings add up to half the lighting load nationwide. Some types of lamp are more efficient than others, but characteristics other than energy consumption may dictate where they can be used. Current lighting strategies consider task requirements, light quality, and the potential for daylighting. Energy management systems that control the timing and intensity of light and new types of energy-efficient bulbs and fixtures are increasingly attractive to consumers. The effort will require continued research and the awareness of decision makers. 4 references, 8 figures.

Lihach, N.; Pertusiello, S.

1984-06-01T23:59:59.000Z

345

Lighting in Commercial Buildings, 1986  

Gasoline and Diesel Fuel Update (EIA)

6 Lighting in Commercial Buildings Lighting in Commercial Buildings --1986 Overview Full Report and Tables Detailed analysis of energy consumption for lighting for U.S. commercial...

346

Energy Basics: Lighting and Daylighting  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Lighting Daylighting Passive Solar Design Space Heating & Cooling Water Heating Lighting and Daylighting Buildings can be lit in two ways: by using artificial lighting, or by...

347

Lighting Group: Sources and Ballasts  

NLE Websites -- All DOE Office Websites (Extended Search)

incorporating LEDs into tomorrows task lights, to reducing light entrapment within the LED, to fundamental research into how Organic Lighting Emitting Diodes operate. LED and...

348

Energy Basics: Lighting and Daylighting  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

by using artificial lighting, or by using daylighting, or the process of using natural sunlight, windows, and skylights to provide lighting. Learn more about: Lighting Daylighting...

349

HYDRONIC BASEBOARD THERMAL DISTRIBUTION SYSTEM WITH OUTDOOR RESET CONTROL TO ENABLE THE USE OF A CONDENSING BOILER.  

SciTech Connect

Use of condensing boilers in residential heating systems offers the potential for significant improvements in efficiency. For these to operate in a condensing mode the return water temperature needs to be about 10 degrees below the saturation temperature for the flue gas water vapor. This saturation temperature depends on fuel type and excess air and ranges from about 110 F to 135 F. Conventional baseboard hydronic distribution systems are most common and these are designed for water temperatures in the 180 F range, well above the saturation temperature. Operating strategies which may allow these systems to operate in a condensing mode have been considered in the past. In this study an approach to achieving this for a significant part of the heating season has been tested in an instrumented home. The approach involves use of an outdoor reset control which reduces the temperature of the water circulating in the hydronic loop when the outdoor temperature is higher than the design point for the region. Results showed that this strategy allows the boiler to operate in the condensing region for 80% of the winter heating season with oil, 90% with propane, and 95% with gas, based on cumulative degree days. The heating system as tested combines space heating and domestic hot water loads using an indirect, 40 gallon tank with an internal heat exchanger. Tests conducted during the summer months showed that the return water temperature from the domestic hot water tank heat exchanger is always below a temperature which will provide condensing operation of the boiler. In the field tests both the condensing boiler and the conventional, non-condensing boiler were in the test home and each was operated periodically to provide a direct performance comparison.

BUTCHER,T.A.

2004-10-01T23:59:59.000Z

350

Solid-State Lighting: Solid-State Lighting Manufacturing Workshop  

NLE Websites -- All DOE Office Websites (Extended Search)

Solid-State Lighting Solid-State Lighting Manufacturing Workshop to someone by E-mail Share Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on Facebook Tweet about Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on Twitter Bookmark Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on Google Bookmark Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on Delicious Rank Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on Digg Find More places to share Solid-State Lighting: Solid-State Lighting Manufacturing Workshop on AddThis.com... Conferences & Meetings Past Conferences Presentations Publications Webcasts Videos Tools Solid-State Lighting Manufacturing Workshop Nearly 200 lighting industry leaders, chip makers, fixture and component

351

Lighting the Way with Compact Fluorescent Lighting | Department...  

NLE Websites -- All DOE Office Websites (Extended Search)

and compact fluorescent lights. And I've already purchased a few of the new light emitting diode (LED) solid-state lighting lights-but that's the topic of a future blog. Stay...

352

LightBox -Exploring Interaction Modalities with Colored Light  

E-Print Network (OSTI)

-bright multi- colored light-emitting diodes (LEDs) of our system can generate any visible lighting color

353

Lighting the Night: Technology, Urban Life and the Evolution of Street Lighting [Light in Place  

E-Print Network (OSTI)

May 1912), 783. 8. "New Street Lights Increase Trade 3 5 Perlight, including street light, became part of America'sBeautiful-inspired street lights graced wealthy residen

Holden, Alfred

1992-01-01T23:59:59.000Z

354

Lighting the Night: Technology, Urban Life and the Evolution of Street Lighting [Light in Place  

E-Print Network (OSTI)

Electrical 16. "Highway Lighting by So dium Vapor Lamps,"Possibilities of Street: Lighting Improve ments," TheLaunches Broad Street Lighting Promotion Campaign," The

Holden, Alfred

1992-01-01T23:59:59.000Z

355

Lighting Research Group: Facilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Facilities Facilities Lighting Research Facilities at LBNL gonio-photometer Gonio-photometer We use this device to measure the intensity and direction of the light from a lamp or fixture. integrating sphere Integrating sphere This instrument allows us to get a fast and accurate measurement of the total light output of a lamp. We are not able to determine the direction of the light, only the intensity. power analyzer Power analyzer We use our power analyzer with the lamps in the gonio-photometer to measure input power, harmonic distortion, power factor, and many other signals that tell us how well a lamp is performing. spectro-radiometer Spectro-radiometer This device measures not only the intensity of a light source but also the intensity of the light at each wavelength.

356

Lighting Group: Software  

NLE Websites -- All DOE Office Websites (Extended Search)

Software Software Lighting Software The Lighting Group has developed several computer programs in the course of conducting research on energy efficient lighting. Several of these programs have proven useful outside the research environment. One of the most popular programs for advanced lighting applications is Radiance. For more information on this program and its availability, click on the link below. RADIANCE Radiance is a suite of programs for the analysis and visualization of lighting in design. The primary advantage of Radiance over simpler lighting calculation and rendering tools is that there are no limitations on the geometry or the materials that may be simulated. Radiance is used by architects and engineers to predict illumination, visual quality and appearance of innovative design spaces, and by researchers to evaluate new

357

High-Intensity Discharge Lighting  

Energy.gov (U.S. Department of Energy (DOE))

High-intensity discharge (HID) lighting provides the highest efficacy and longest service life of any lighting type. It can save 75%-90% of lighting energy when it replaces incandescent lighting.

358

Arnold Schwarzenegger LIGHTING RESEARCH PROGRAM  

E-Print Network (OSTI)

Project Summaries ELEMENT 2: ADVANCE LIGHTING TECHNOLOGIES PROJECT 2.1 LIGHT EMITTING DIODE (LED light emitting diodes (LED) technology for general lighting applications by developing a task lamp

359

Solid-State Lighting: Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

about Solid-State Lighting: Tools on Twitter Bookmark Solid-State Lighting: Tools on Google Bookmark Solid-State Lighting: Tools on Delicious Rank Solid-State Lighting: Tools on...

360

Solid-State Lighting: News  

NLE Websites -- All DOE Office Websites (Extended Search)

about Solid-State Lighting: News on Twitter Bookmark Solid-State Lighting: News on Google Bookmark Solid-State Lighting: News on Delicious Rank Solid-State Lighting: News on...

Note: This page contains sample records for the topic "outdoor lighting mv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Pedestrian-Friendly Nighttime Pedestrian-Friendly Nighttime Lighting to someone by E-mail Share Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on Facebook Tweet about Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on Twitter Bookmark Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on Google Bookmark Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on Delicious Rank Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on Digg Find More places to share Solid-State Lighting: Pedestrian-Friendly Nighttime Lighting on AddThis.com... Conferences & Meetings Presentations Publications Webcasts Videos Tools Pedestrian-Friendly Nighttime Lighting This November 19, 2013 webinar presented issues and considerations related to pedestrian-friendly nighttime lighting, such as color rendering, safety,

362

Advanced Light Sources  

Science Conference Proceedings (OSTI)

In the generation of artificial light using electric lamps, photometric and color performance have been paramount in lamp design, manufacturing, measurement, lighting design, and visual perception. Many designers and researchers have strived to understand how light and color are generated, related, and to improve them. This has stemmed from the development of incandescent lamps, halogen lamps, linear fluorescent lamps, high-intensity discharge (HID) lamps, and compact fluorescent lamps (CFLs) among other...

2008-03-31T23:59:59.000Z

363

Advanced Lighting Technologies  

Science Conference Proceedings (OSTI)

This report continues the technical assessment of advanced lighting technologies in the following product areasdimmable light-emitting diode (LED) screw-in replacement lamp, hybrid compact fluorescent lamp/halogen screw-in replacement lamp, replacement recessed can LED downlight, organic LED (OLED) disc, replacement mini high-intensity discharge (HID) lamp and ballast system, and solid-state plasma lighting (miniature HID technology) high-bay fixture. The research in this project helps to demonstrate how...

2011-12-21T23:59:59.000Z

364

Central Wisconsin Elec Coop | Open Energy Information  

Open Energy Info (EERE)

Central Wisconsin Elec Coop Central Wisconsin Elec Coop Jump to: navigation, search Name Central Wisconsin Elec Coop Place Wisconsin Utility Id 3293 Utility Location Yes Ownership C NERC Location RFC NERC RFC Yes ISO MISO Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Controlled Heating Commercial Irrigation-Rate L Industrial Irrigation-Rate M Industrial Irrigation-Rate N (Controlled) Industrial Large General Service Industrial Medium General Service Industrial Outdoor Lighting Service-100w HPS Lighting Outdoor Lighting Service-150w HPS Lighting Outdoor Lighting Service-175w MV Lighting

365

Barry Electric Coop | Open Energy Information  

Open Energy Info (EERE)

Barry Electric Coop Barry Electric Coop Place Missouri Utility Id 1279 Utility Location Yes Ownership C NERC Location SERC NERC SERC Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Outdoor Lighting HPS 100 W Lighting Outdoor Lighting HPS 400 W Lighting Outdoor Lighting MV 175 W Lighting Residential Residential Average Rates Residential: $0.0914/kWh Commercial: $0.0793/kWh Industrial: $0.0656/kWh References ↑ "EIA Form EIA-861 Final Data File for 2010 - File1_a" Retrieved from "http://en.openei.org/w/index.php?title=Barry_Electric_Coop&oldid=409023

366

Total Light Management  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Light Management Light Management Why is saving Energy Important World Electricity Consumption (2007) Top 20 Countries 0 500 1000 1500 2000 2500 3000 3500 4000 4500 U n i t e d S t a t e s C h i n a J a p a n R u s s i a I n d i a G e r m a n y C a n a d a A f r i c a F r a n c e B r a z i l K o r e a , S o u t h U n i t e d K i n g d o m I t a l y S p a i n A u s t r a l i a T a i w a n S o u t h A f r i c a M e x i c o S a u d i A r a b i a I r a n Billion kWh Source: US DOE Energy Information Administration Lighting Control Strategies 4 5 6 Occupancy/Vacancy Sensing * The greatest energy savings achieved with any lighting fixture is when the lights are shut off * Minimize wasted light by providing occupancy sensing or vacancy sensing 7 8 Daylight Harvesting * Most commercial space has enough natural light flowing into it, and the amount of artificial light being generated can be unnecessary * Cut back on the production of artificial lighting by

367

Light truck forecasts  

SciTech Connect

The recent dramatic increase in the number of light trucks (109% between 1963 and 1974) has prompted concern about the energy consequences of the growing popularity of the light truck. An estimate of the future number of light trucks is considered to be a reasonable first step in assessing the energy impact of these vehicles. The monograph contains forecasts based on two models and six scenarios. The coefficients for the models have been derived by ordinary least squares regression of national level time series data. The first model is a two stage model. The first stage estimates the number of light trucks and cars (together), and the second stage applies a share's submodel to determine the number of light trucks. The second model is a simultaneous equation model. The two models track one another remarkably well, within about 2%. The scenarios were chosen to be consistent with those used in the Lindsey-Kaufman study Projection of Light Truck Population to Year 2025. Except in the case of the most dismal economic scenario, the number of light trucks is expected to increase from the 1974 level of 0.09 light truck per person to about 0.12 light truck per person in 1995.

Liepins, G.E.

1979-09-01T23:59:59.000Z

368

SITE LIGHTING FOUNDATIONS  

SciTech Connect

The purpose of this analysis is to design structural foundations for the Site Lighting. This analysis is in support of design drawing BABBDF000-01717-2100-23016.

M. Gomez

1995-01-17T23:59:59.000Z

369

Advanced Demand Responsive Lighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Efficiency Program and Market Trends High Technology and Industrial Buildings Lighting Systems Residential Buildings Simulation Tools Sustainable Federal Operations Windows...

370

Photovoltaic lighting system performance  

DOE Green Energy (OSTI)

The performance of 21 PV-powered low pressure sodium lighting systems on a multi-use has been documented in this paper. Specific areas for evaluation include the vandal resistant PV modules, constant voltage and on/off PV charge controllers, flooded deep-cycle lead-antimony and valve regulated lead-acid (VLRA) gel batteries, and low pressure sodium ballasts and lights. The PV lighting system maintenance intervals and lessons learned have been documented over the past 2.5 years. The above performance data has shown that with careful hardware selection, installation, and maintenance intervals the PV lighting systems will operate reliably.

Harrington, S.R.; Hund, T.D.

1996-06-01T23:59:59.000Z

371

Faster Than Light?  

E-Print Network (OSTI)

It is argued that special relativity remains a viable physical theory even when there is permitted signals traveling faster than light.

Robert Geroch

2010-05-10T23:59:59.000Z

372

Energy Basics: Fluorescent Lighting  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

& Cooling Water Heating Fluorescent Lighting Fluorescent lamps use 25%-35% of the energy used by incandescent lamps to provide the same amount of illumination (efficacy of...

373

NIST Stray light correction  

Science Conference Proceedings (OSTI)

... A correction, which can be done in real time, can reduce errors due to stray light by more than one order of magnitude. ...

2012-10-02T23:59:59.000Z

374

Small Hybrid Systems and Applications Testing at NREL's Outdoor Test Facility  

DOE Green Energy (OSTI)

The PV International Program at the National Renewable Energy Laboratory recently installed a small hybrid solar and wind energy system that could produce enough electricity to power a cabin or provide electricity in a remote village, without being connected to a utility grid. The solar system can provide 1,400 watts of power, and the wind turbine is rated at 900 watts when the wind is blowing at 28 miles per hour. The 48-volt system has eight batteries for storage. When the batteries are fully charged, the control system slows down the wind turbine so as not to overcharge the batteries. The turbine is mounted on a tilt-down, guyless, 30-foot tower that allows one person to easily lower and raise the machine for maintenance. A data acquisition system is being designed to monitor the individual outputs from the solar system and the wind system. The small hybrid system is housed in an insulated shed, the PV International Program's Test Building (ITB). The ITB contains electrical loads found in the average home, including a refrigerator, lights, heaters, air coolers, computers, and a radio.

Roybal, L.

2005-01-01T23:59:59.000Z

375

Lakeview Light and Power - Commercial Lighting Rebate Program | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lakeview Light and Power - Commercial Lighting Rebate Program Lakeview Light and Power - Commercial Lighting Rebate Program Lakeview Light and Power - Commercial Lighting Rebate Program < Back Eligibility Commercial Fed. Government Local Government Nonprofit State Government Savings Category Appliances & Electronics Commercial Lighting Lighting Program Info Funding Source Funded by Bonneville Power Administration Expiration Date 9/1/2013 State District of Columbia Program Type Utility Rebate Program Rebate Amount Commercial Lighting Installation: Up to 70% of cost Provider Lakeview Light and Power Lakeview Light and Power offers a commercial lighting rebate program. Rebates apply to the installation of energy efficient lighting retrofits in non-residential buildings. The rebate program is funded by BPA and ends in September of 2010 or earlier if the funding is exhausted. Lakeview Light

376

Explosively pumped laser light  

DOE Patents (OSTI)

A single shot laser pumped by detonation of an explosive in a shell casing. The shock wave from detonation of the explosive causes a rare gas to luminesce. The high intensity light from the gas enters a lasing medium, which thereafter outputs a pulse of laser light to disable optical sensors and personnel.

Piltch, Martin S. (Los Alamos, NM); Michelotti, Roy A. (Los Alamos, NM)

1991-01-01T23:59:59.000Z

377

The gravity of light  

E-Print Network (OSTI)

A solution of the old problem raised by Tolman, Ehrenfest, Podolsky and Wheeler, concerning the lack of attraction of two light pencils "moving parallel", is proposed, considering that the light can be source of nonlinear gravitational waves corresponding (in the would be quantum theory of gravity) to spin-1 massless particles.

G. Sparano; G. Vilasi; S. Vilasi

2010-09-12T23:59:59.000Z

378

Developing architectural lighting representations  

Science Conference Proceedings (OSTI)

This paper reports on the development of a visualization system for architectural lighting designers. It starts by motivating the problem as both complex in its physics and social organization. Three iterations of prototypes for displaying time and space ... Keywords: architectural lighting design, energy efficiency, ethnographic fieldwork, information visualization, qualitative analysis

Daniel C. Glaser; Roger Tan; John Canny; Ellen Yi-Luen Do

2003-10-01T23:59:59.000Z

379

Light intensity compressor  

DOE Patents (OSTI)

In a system for recording images having vastly differing light intensities over the face of the image, a light intensity compressor is provided that utilizes the properties of twisted nematic liquid crystals to compress the image intensity. A photoconductor or photodiode material that is responsive to the wavelength of radiation being recorded is placed adjacent a layer of twisted nematic liquid crystal material. An electric potential applied to a pair of electrodes that are disposed outside of the liquid crystal/photoconductor arrangement to provide an electric field in the vicinity of the liquid crystal material. The electrodes are substantially transparent to the form of radiation being recorded. A pair of crossed polarizers are provided on opposite sides of the liquid crystal. The front polarizer linearly polarizes the light, while the back polarizer cooperates with the front polarizer and the liquid crystal material to compress the intensity of a viewed scene. Light incident upon the intensity compressor activates the photoconductor in proportion to the intensity of the light, thereby varying the field applied to the liquid crystal. The increased field causes the liquid crystal to have less of a twisting effect on the incident linearly polarized light, which will cause an increased percentage of the light to be absorbed by the back polarizer. The intensity of an image may be compressed by forming an image on the light intensity compressor.

Rushford, Michael C. (Livermore, CA)

1990-01-01T23:59:59.000Z

380

Hybrid lighting: Illuminating our future  

SciTech Connect

Hybrid lighting is a combination of natural and artificial illumination to be used indoors for all lighting needs. Ideally, hybrid lighting is effectively indistinguishable from standard artificial lighting except in quality and cost, where it will likely be an improvement. Hybrid lighting systems are produced by a combination of four technologies: collecting natural light, generating artificial light, transporting and distributing light to where it is needed, and controlling the amounts of both natural and artificial light continuously during usage. Lighting demands a large fraction of our energy needs. If we can control or decrease this demand, we are able to accommodate societal growth without energy demand growth.

Cates, M.R.

1996-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "outdoor lighting mv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Exploring Lighting Spaces  

E-Print Network (OSTI)

We present a simple system for interactively specifying lighting parameters, including position, for high-quality image synthesis. Unlikeinverse approaches to the lighting-design problem, we do not require the user to indicate a priori the desired illuminative characteristics of an image. In our approach the computer proposes, culls, and organizes a set of candidate lights automatically, using an elementary measure of image similarityasthe basis for both culling and organization. The user then browses the set of candidate-light images, selects which lights to include, and combines them as desired. This work is a particular instance of a general strategy --- sampling a design space broadly and intelligently and organizing the results for rapid browsing by the user --- that may be applicable to many other design problems in computer graphics.

T. Kang; J. Seims; J. Marks; S. Shieber

1996-01-01T23:59:59.000Z

382

Demonstration Assessment of Light Emitting Diode (LED) Walkway Lighting at the Federal Aviation Administration William J. Hughes Technical Center, in Atlantic City, New Jersey  

SciTech Connect

This report documents the results of a collaborative project to demonstrate a solid state lighting (SSL) general illumination product in an outdoor area walkway application. In the project, six light-emitting diode (LED) luminaires were installed to replace six existing high pressure sodium (HPS) luminaires mounted on 14-foot poles on a set of exterior walkways and stairs at the Federal Aviation Administration (FAA) William J. Hughes Technical Center in Atlantic City, New Jersey, during December, 2007. The effort was a U.S. Department of Energy (DOE) SSL Technology Gateway Demonstration that involved a collaborative teaming agreement between DOE, FAA and Ruud Lighting (and their wholly owned division, Beta LED). Pre- and post-installation power and illumination measurements were taken and used in calculations of energy savings and related economic payback, while personnel impacted by the new lights were provided questionnaires to gauge their perceptions and feedback. The SSL product demonstrated energy savings of over 25% while maintaining illuminance levels and improving illuminance uniformity. PNNL's economic analysis yielded a variety of potential payback results depending on the assumptions used. In the best case, replacing HPS with the LED luminaire can yield a payback as low as 3 years. The new lamps were quite popular with the affected personnel, who gave the lighting an average score of 4.46 out of 5 for improvement.

Kinzey, Bruce R.; Myer, Michael

2008-03-18T23:59:59.000Z

383

Developing a dynamic envelope/lighting control system with field measurements  

SciTech Connect

The feasibility of an intelligent venetian blind/lighting control system was tested in a 1:3 scale model outdoors under variable sun and sky conditions. The control algorithm, block direct sun and meet the design workplane illuminance level, was implemented using commercially available and custom designed blind and lighting systems hardware. While blocking direct sunlight, the blinds were properly controlled to maintain the design workplane illuminance within a tolerance of -10%, +25% when there was sufficient daylight. When daylight levels alone were inadequate, the electric lighting control system maintained the design workplane illuminance. The electric lighting could be turned off if a user-specified time period at minimum power was exceeded. Lighting energy savings of 51-71% (southwest) and 37-75% (south) was attained for the period from 8:00 to 17:00 on clear sunny days, compared to a fixed, partially closed blind with the same lighting system. Practical details for implementation and commissioning are discussed. The impact of control variations, such as profile angle, time step interval, and control area, on energy demand is investigated.

DiBartolomeo, D.L.; Lee, E.S.; Rubinstein, F.M.; Selkowitz, S.E.

1996-05-01T23:59:59.000Z

384

Light and Bread Mold  

NLE Websites -- All DOE Office Websites (Extended Search)

Light and Bread Mold Light and Bread Mold Name: CHASE Location: N/A Country: N/A Date: N/A Question: HOW CAN I EFICTIVELY TEST THE EFFECTS OF LIGHT ON BREAD MOLD? Replies: Hello Chase, In order to test the effects of light on bread mould you need to set up an experiment. There are two things you need to have in your experiment to make it a good experiment: 1. A 'control'. 2. Replicates 1. The 'control' Obviously in order to test the effects of light on bread mold you will need to actually shine some light on some bread mold and see what happens. This is your 'treatment'. However, it is vitally important that you know what would have happened without the treatment (in this case added light). Let's pretend that you do a test a you find that the bread mold under the light actually dies. How do you know if your bread mold died because light was added or because at that time of year all bread mold would die naturally or because by adding light you caused the temperature to rise and that killed the bread mold? The answer is that you do not know unless you have taken the trouble to find out with anouther test called the 'control'. The 'control' is a piece of bread mold, identical to the 'treatment' bread mold, which is placed in identical conditions to the 'treatment' piece of bread mold except that light is removed. Your 'control' piece of bread mold will need to be (to the best of your abillity) at the same temperature, in the same area, at similar humidity, etc. Part of the skill of designing a scientific experiment is being able think of all the possible things which might be affecting the bread mold and keeping them the same in both the 'treatment' and the 'control' (except, of course, for the presence of light) so that when you find a difference between the 'treatment' and the 'control' you are sure that it is the result of the light rather than something else.

385

Columbia Water and Light - HVAC and Lighting Efficiency Rebates |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Columbia Water and Light - HVAC and Lighting Efficiency Rebates Columbia Water and Light - HVAC and Lighting Efficiency Rebates Columbia Water and Light - HVAC and Lighting Efficiency Rebates < Back Eligibility Commercial Industrial Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Heat Pumps Appliances & Electronics Commercial Lighting Lighting Maximum Rebate Lighting: 50% of invoiced cost up to $22,500 Program Info State Missouri Program Type Utility Rebate Program Rebate Amount HVAC Replacements: $570 - $3,770 Lighting: $300/kW reduction or half of project cost Provider Columbia Water and Light Columbia Water and Light (CWL) offers rebates to its commercial and industrial customers for the purchase of high efficiency HVAC installations and efficient lighting. Incentives for certain measures are based upon the

386

Induction Lighting: An Old Lighting Technology Made New Again | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Induction Lighting: An Old Lighting Technology Made New Again Induction Lighting: An Old Lighting Technology Made New Again Induction Lighting: An Old Lighting Technology Made New Again July 27, 2009 - 5:00am Addthis John Lippert Induction lighting is one of the best kept secrets in energy-efficient lighting. Simply stated, induction lighting is essentially a fluorescent light without electrodes or filaments, the items that frequently cause other bulbs to burn out quickly. Thus, many induction lighting units have an extremely long life of up to 100,000 hours. To put this in perspective, an induction lighting system lasting 100,000 hours will last more than 11 years in continuous 24/7 operation, and 25 years if operated 10 hours a day. The technology, however, is far from new. Nikola Tesla demonstrated induction lighting in the late 1890s around the same time that his rival,

387

Reading Municipal Light Department - Business Lighting Rebate Program |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Reading Municipal Light Department - Business Lighting Rebate Reading Municipal Light Department - Business Lighting Rebate Program Reading Municipal Light Department - Business Lighting Rebate Program < Back Eligibility Agricultural Commercial Fed. Government Industrial Institutional Local Government Nonprofit Schools State Government Savings Category Appliances & Electronics Commercial Lighting Lighting Maximum Rebate Commercial Customers: $10,000 per calendar year Municipal Customers: $15,000 per calendar year Program Info State Massachusetts Program Type Utility Rebate Program Rebate Amount T-8/T-5 Lamp with Electronic Ballasts: $11 - $35/fixture Interior High Output Lamp with Electronic Ballasts: $100/fixture De-lamping: $4 - $9/lamp Lighting Sensors: $20/sensor LED Exit Signs: $20/fixture Provider Incentive Programs

388

Lighting fundamentals handbook: Lighting fundamentals and principles for utility personnel  

SciTech Connect

Lighting accounts for approximately 30% of overall electricity use and demand in commercial buildings. This handbook for utility personnel provides a source of basic information on lighting principles, lighting equipment, and other considerations related to lighting design. The handbook is divided into three parts. Part One, Physics of Light, has chapters on light, vision, optics, and photometry. Part Two, Lighting Equipment and Technology, focuses on lamps, luminaires, and lighting controls. Part Three, Lighting Design Decisions, deals with the manner in which lighting design decisions are made and reviews relevant methods and issues. These include the quantity and quality of light needed for visual tasks, calculation methods for verifying that lighting needs are satisfied, lighting economics and methods for evaluating investments in efficient lighting systems, and miscellaneous design issues including energy codes, power quality, photobiology, and disposal of lighting equipment. The handbook contains a discussion of the role of the utility in promoting the use of energy-efficient lighting. The handbook also includes a lighting glossary and a list of references for additional information. This convenient and comprehensive handbook is designed to enable utility lighting personnel to assist their customers in developing high-quality, energy-efficient lighting systems. The handbook is not intended to be an up-to-date reference on lighting products and equipment.

Eley, C.; Tolen, T. (Eley (Charles) Associates, San Francisco, CA (United States)); Benya, J.R. (Luminae Souter Lighting Design, San Francisco, CA (United States))

1992-12-01T23:59:59.000Z

389

EK101 Engineering Light Project: Evaluate Residential Lighting  

E-Print Network (OSTI)

the same level of performance in the LED Lighting product solution (retrofit light bulb, ceiling lighting minute of networking ­ refreshments will be served) Thinking Differently about LED Lighting Dr. Matthew A, LEDs have emerged as the next "filament" for the lighting industry. While LEDs are not new

Bifano, Thomas

390

Lighting Group: Controls: IBECS  

NLE Websites -- All DOE Office Websites (Extended Search)

IBECS IBECS Integrated Building Environmental Communications System Objective The overall technical goal of the IBECS project is to develop an integrated building equipment communications network that will allow appropriate automation of lighting and envelope systems to increase energy efficiency, improve building performance, and enhance occupant experience in the space. This network will provide a low-cost means for occupants to control local lighting and window systems, thereby improving occupant comfort, satisfaction and performance. A related goal is to improve existing lighting control components and accelerate development of new daylighting technologies that will allow daylighting to be more extensively applied to a larger proportion of building floor space.

391

White light velocity interferometer  

DOE Patents (OSTI)

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s. 41 figs.

Erskine, D.J.

1997-06-24T23:59:59.000Z

392

White light velocity interferometer  

DOE Patents (OSTI)

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s.

Erskine, David J. (Oakland, CA)

1997-01-01T23:59:59.000Z

393

White light velocity interferometer  

DOE Patents (OSTI)

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s.

Erskine, David J. (Oakland, CA)

1999-01-01T23:59:59.000Z

394

AUTOMATIC LIGHT CONTROL  

DOE Patents (OSTI)

A control system for a projection kinescope used in a facsimile scanning system and, in particular, meams for maintaining substantially constant the light emanating from the flying spot on the face of the kinescope are described. In general, the invention provides a feeler member disposed in such a position with respect to a projecting lens as to intercept a portion of the light striking the lens. Suitable circuitry in conjunction with a photomultiplier tube provides a signal proportional to the light intensity of the flying spot. The grid bias on the kinescope is controlled by this signal to maintain the intensity of the spot substantially constant.

Artzt, M.

1957-08-27T23:59:59.000Z

395

Green Light Pulse Oximeter  

DOE Patents (OSTI)

A reflectance pulse oximeter that determines oxygen saturation of hemoglobin using two sources of electromagnetic radiation in the green optical region, which provides the maximum reflectance pulsation spectrum. The use of green light allows placement of an oximetry probe at central body sites (e.g., wrist, thigh, abdomen, forehead, scalp, and back). Preferably, the two green light sources alternately emit light at 560 nm and 577 nm, respectively, which gives the biggest difference in hemoglobin extinction coefficients between deoxyhemoglobin, RHb, and oxyhemoglobin, HbO.sub.2.

Scharf, John Edward (Oldsmar, FL)

1998-11-03T23:59:59.000Z

396

Entangled states of light  

E-Print Network (OSTI)

These notes are more or less a faithful representation of my talk at the Workshop on ``Quantum Coding and Quantum Computing'' held at the University of Virginia. As such it is an introduction for non-physicists to the topics of the quantum theory of light and entangled states of light. In particular, I discuss the photon concept and what is really entangled in an entangled state of light (it is not the photons). Moreover, I discuss an example that highlights the peculiar behavior of entanglement in an infinite-dimensional Hilbert space.

S. J. van Enk

2004-03-16T23:59:59.000Z

397

White light velocity interferometer  

DOE Patents (OSTI)

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s. 41 figs.

Erskine, D.J.

1999-06-08T23:59:59.000Z

398

Measuring OutdoorAir Intake Rates Using Electronic Velocity Sensors at Louvers and Downstream of Airflow Straighteners  

SciTech Connect

Practical and accurate technologies are needed for continuously measuring and controlling outdoor air (OA) intake rates in commercial building heating, ventilating, and air conditioning (HVAC) systems. This project evaluated two new measurement approaches. Laboratory experiments determined that OA flow rates were measurable with errors generally less than 10percent using electronic air velocity probes installed between OA intake louver blades or at the outlet face of louvers. High accuracy was maintained with OA flow rates as low as 15percent of the maximum for the louvers. Thus, with this measurement approach HVAC systems do not need separate OA intakes for minimum OA supply. System calibration parameters are required for each unique combination of louver type and velocity sensor location but calibrations are not necessary for each system installation. The research also determined that the accuracy of measuring OA flow rates with velocity probes located in the duct downstream of the intake louver was not improved by installing honeycomb airflow straighteners upstream of the probes. Errors varied with type of upstream louver, were as high as 100percent, and were often greater than 25percent. In conclusion, use of electronic air velocity probes between the blades of OA intake louvers or at the outlet face of louvers is a highly promising means of accurately measuring rates of OA flow into HVAC systems. The use of electronic velocity probes downstream of airflow straighteners is less promising, at least with the relatively small OA HVAC inlet systems employed in this research.

Fisk, William; Sullivan, Douglas; Cohen, Sebastian; Han, Hwataik

2008-10-01T23:59:59.000Z

399

Generation of a Parabolic Trough Collector Efficiency Curve from Separate Measurements of Outdoor Optical Efficiency and Indoor Receiver Heat Loss  

SciTech Connect

The thermal efficiency of a parabolic trough collector is a function of both the fraction of direct normal radiation absorbed by the receiver (the optical efficiency) and the heat lost to the environment when the receiver is at operating temperature. The thermal efficiency can be determined by testing the collector under actual operating conditions or by separately measuring these two components. This paper describes how outdoor measurement of the optical efficiency is combined with laboratory measurements of receiver heat loss to obtain the thermal efficiency curve. This paper describes this approach and also makes the case that there are advantages to plotting collector efficiency versus the difference between the operating temperature and the ambient temperature at which the receiver heat loss was measured divided by radiation to a fractional power (on the order of 1/3 but obtained via data regression) - as opposed to the difference between operating and ambient temperatures divided by the radiation. The results are shown to be robust over wide ranges of ambient temperature, sky temperature, and wind speed.

Kutscher, C.; Burkholder, F.; Stynes, J. K.

2012-02-01T23:59:59.000Z

400

Lighting Renovations | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting Renovations Lighting Renovations Lighting Renovations October 16, 2013 - 4:54pm Addthis When undertaking a lighting renovation in a Federal building, daylighting is the primary renewable energy opportunity. Photovoltaics (PV) also present an excellent opportunity. While this guide focuses on the renewable energy opportunities, energy efficiency may also present amble opportunity for energy and cost savings. Renewable Energy Options for Lighting Renovations Daylighting Photovoltaics Daylighting Daylighting maximizes the use of natural light in a space to reduce the need for artificial lighting. Incorporating daylighting into a lighting strategy should occur during the planning stage of design since it affects all aspects. Ambient light dimming controls are critical in daylighting, since the

Note: This page contains sample records for the topic "outdoor lighting mv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Peninsula Light Company - Commercial Efficient Lighting Rebate Program |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Peninsula Light Company - Commercial Efficient Lighting Rebate Peninsula Light Company - Commercial Efficient Lighting Rebate Program Peninsula Light Company - Commercial Efficient Lighting Rebate Program < Back Eligibility Commercial Savings Category Appliances & Electronics Commercial Lighting Lighting Program Info State District of Columbia Program Type Utility Rebate Program Rebate Amount General: 30% - 70% of cost Provider Peninsula Light Company Peninsula Light Company (PLC) offers a rebate program for commercial customers who wish to upgrade to energy efficient lighting. Participating customers must be served by PLC commercial service. Customers who upgrade to highly efficient fixtures and systems are eligible to receive a rebate generally covering 30% - 70% of the project cost. These retrofits improve light quality and reduce energy costs in participating facilities. PLC

402

Solid-State Lighting: 2013 Solid-State Lighting Manufacturing...  

NLE Websites -- All DOE Office Websites (Extended Search)

2013 Solid-State Lighting Manufacturing R&D Workshop Presentations and Materials to someone by E-mail Share Solid-State Lighting: 2013 Solid-State Lighting Manufacturing R&D...

403

Lots of Light Literature  

NLE Websites -- All DOE Office Websites (Extended Search)

Lots of Light Literature Lots of Light Literature The Teacher Resource Center contains a great variety of resources for all areas of science K-12. For the concepts of light here is a sampling of some of these resources. Science is Elementary - Spring 1995, vol. 6, no. 4. Science is Elementary is produced by the Museum Institute for Teaching Science, 79 Milk Street, Suite 210, Boston, MA 02109-3903. Science is Elementary is a newsletter we have admired for years. The topic of this issue deals with Color and Light. It contains content information to the teacher, trade secrets or teaching tips, "Book Looking" section and the section call "Sciencing" which includes a variety of activities. Science is Elementary is published quarterly. Subscription cost is: $22.00/year.

404

Slow-light solitons  

E-Print Network (OSTI)

A new type of soliton with controllable speed is constructed generalizing the theory of slow-light propagation to an integrable regime of nonlinear dynamics. The scheme would allow the quantum-information transfer between optical solitons and atomic media.

Ulf Leonhardt

2004-08-06T23:59:59.000Z

405

Light Vector Mesons  

E-Print Network (OSTI)

This article reviews the current status of experimental results obtained in the measurement of light vector mesons produced in proton-proton and heavy ion collisions at different energies. The review is focused on two phenomena related to the light vector mesons; the modification of the spectral shape in search of Chiral symmetry restoration and suppression of the meson production in heavy ion collisions. The experimental results show that the spectral shape of light vector mesons are modified compared to the parameters measured in vacuum. The nature and the magnitude of the modification depends on the energy density of the media in which they are produced. The suppression patterns of light vector mesons are different from the measurements of other mesons and baryons. The mechanisms responsible for the suppression of the mesons are not yet understood. Systematic comparison of existing experimental results points to the missing data which may help to resolve the problem.

Alexander Milov

2008-09-23T23:59:59.000Z

406

Energy Basics: Fluorescent Lighting  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Fluorescent Lighting Fluorescent lamps use 25%-35% of the energy used by incandescent lamps to provide the same amount of illumination (efficacy of 30-110 lumens per watt). They...

407

Energy Basics: LED Lighting  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

positivenegative junction of the diode, the electrons slow down to orbit at a lower energy level. The electrons emit the excess energy as photons of light. LEDs are often used...

408

Light Duty Vehicle Pathways  

NLE Websites -- All DOE Office Websites (Extended Search)

in 2030 0 5 10 15 20 25 30 Million BarrelsDay IMPORTS DOMESTIC OIL SUPPLY OIL DEMAND ELECTRICITY RES. & COM. INDUSTRY MISC. TRANSPORT AIR TRUCKS LIGHT DUTY VEHICLES ETHANOL...

409

General Light Metals  

Science Conference Proceedings (OSTI)

Mar 3, 2011 ... A detailed literature survey indicates that vacuum sintering is able to produce ... In recent years, there is a high demand for light-weight metals foams. ... Each powder mixture's composition is determined by response surface...

410

Practical image based lighting  

E-Print Network (OSTI)

In this thesis, we present a user-friendly and practical method for seamless integration of computer-generated images (CG) with real photographs and video. In general such seamless integration is extremely hard and requires recovery of real world information to simulate the same environment for both CG and real objects. This real world information includes camera positions and parameters, and shapes, material properties, and motion of real objects. Among these one of the most important real world information is lighting. Image based lighting that is developed to recover illumination information of the real world from photographs has recently been popular in computer graphics. In this thesis we present a practical image based lighting method. Our method is based on a simple and easily constructible device: a square plate with a cylindrical stick. We have developed a user-guided system to approximately recover illumination information (i.e. orientations, colors, and intensities of light sources) from a photograph of this device. Our approach also helps to recover surface colors of real objects based on reconstructed lighting information. In addition, we will address our observation on shadows with multi-color lights in a compositing aspect and will present a solution to handle the addressed issue.

Lee, Jaemin

2003-01-01T23:59:59.000Z

411

Commercial Lighting and LED Lighting Incentives (Vermont) | Open...  

Open Energy Info (EERE)

form History Share this page on Facebook icon Twitter icon Commercial Lighting and LED Lighting Incentives (Vermont) This is the approved revision of this page, as well as...

412

Solid-State Lighting: Residential Lighting End-Use Consumption  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting End-Use Consumption Study aims to improve the understanding of lighting energy usage in U.S. residential dwellings using a regional estimation framework. The...

413

Columbia Water & Light- HVAC and Lighting Efficiency Rebates  

Energy.gov (U.S. Department of Energy (DOE))

Columbia Water & Light (CWL) offers rebates to its commercial and industrial customers for the purchase of high efficiency HVAC installations and efficient lighting. Incentives for certain...

414

Solid-State Lighting: Solid-State Lighting  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Lighting Search Search Help Solid-State Lighting HOME ABOUT THE PROGRAM R&D PROJECTS MARKET-BASED PROGRAMS SSL BASICS INFORMATION RESOURCES FINANCIAL OPPORTUNITIES EERE...

415

Towards a poetics of light : the conceits of light.  

E-Print Network (OSTI)

??Towards a Poetics of Light; The Conceits of Light is a critical quest to map associations between rhetorical figures, psychological defences and spatial tropes in (more)

Evans, M

2006-01-01T23:59:59.000Z

416

Types of Lighting in Commercial Buildings - Lighting Characteristics  

U.S. Energy Information Administration (EIA) Indexed Site

U.S. Lighting Market Characterization, Vol. 1: National Lighting Inventory and Energy Consumption Estimate, Office of Energy Efficiency and Renewable Energy,...

417

LED Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

LED Lighting LED Lighting LED Lighting July 29, 2012 - 4:43pm Addthis LED Lighting What are the key facts? Quality LED products can last 25 times longer than an incandescent bulb and use 75% less energy. LEDs are directional, focusing light in ways that are useful in homes and commercial settings. The light-emitting diode (LED) is one of today's most energy-efficient and rapidly-developing lighting technologies. Quality LED light bulbs last longer, are more durable, and offer comparable or better light quality than other types of lighting. Check out the top 8 things about LEDs to learn more. Energy Savings LED is a highly energy efficient lighting technology, and has the potential to fundamentally change the future of lighting in the United States. Residential LEDs -- especially ENERGY STAR rated products -- use at least

418

Materials for solid state lighting  

E-Print Network (OSTI)

in the Proceedings. Materials for Solid State Lighting S.G.Johnson Lighting Research Group Building TechnologiesMaterials for Solid State Lighting S.G. Johnson 1 and J. A.

Johnson, S.G.; Simmons, J.A.

2002-01-01T23:59:59.000Z

419

Light as a Healing Mechanism  

E-Print Network (OSTI)

S. (1991). Meridians conduct light. Moskow: Raum and Zeit.the bodys absorption of light. Explore, 9(2), doi: https://01). The healing use of light and color. Health Care Design

Lingampalli, Nithya

2013-01-01T23:59:59.000Z

420

Light diffusing fiber optic chamber  

DOE Patents (OSTI)

A light diffusion system for transmitting light to a target area. The light is transmitted in a direction from a proximal end to a distal end by an optical fiber. A diffusing chamber is operatively connected to the optical fiber for transmitting the light from the proximal end to the distal end and transmitting said light to said target area. A plug is operatively connected to the diffusing chamber for increasing the light that is transmitted to the target area.

Maitland, Duncan J. (Lafayette, CA)

2002-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "outdoor lighting mv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop  

NLE Websites -- All DOE Office Websites (Extended Search)

Los Angeles, CA to someone Los Angeles, CA to someone by E-mail Share Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Los Angeles, CA on Facebook Tweet about Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Los Angeles, CA on Twitter Bookmark Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Los Angeles, CA on Google Bookmark Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Los Angeles, CA on Delicious Rank Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Los Angeles, CA on Digg Find More places to share Solid-State Lighting: Municipal Consortium

422

Virginia Tech Electric Lighting Report  

NLE Websites -- All DOE Office Websites (Extended Search)

LIGHTING Daylight and Electric Careful consideration has been given to the integration of daylight, electric light, and the consequences relative to energy conservation, spatial...

423

Science Afternoon Properties of Light  

Science Conference Proceedings (OSTI)

... Science Afternoon. Properties of Light. ... We discovered that there was a lot to learn about the Properties of Light! Supplemental Materials. ...

2012-04-25T23:59:59.000Z

424

Physics Out Loud - Cerenkov Light  

NLE Websites -- All DOE Office Websites (Extended Search)

Baryon Previous Video (Baryon) Physics Out Loud Main Index Next Video (Cross Section) Cross Section Cerenkov Light The bright blue glow from nuclear reactors is Cerenkov light....

425

Physics Out Loud - Cherenkov Light  

NLE Websites -- All DOE Office Websites (Extended Search)

Baryon Previous Video (Baryon) Physics Out Loud Main Index Next Video (Cross Section) Cross Section Cherenkov Light The bright blue glow from nuclear reactors is Cherenkov light....

426

Flash Lighting with Fluorescent Lamp.  

E-Print Network (OSTI)

??A flash lighting circuit with the fluorescent lamp is designed to produce lighting flicker by means of controlling the operating frequency and the duty-ratio of (more)

Hsieh, Horng

2005-01-01T23:59:59.000Z

427

Light pipe - design for efficiency  

Science Conference Proceedings (OSTI)

The high cost and availability of materials which are clear enough to transmit light without absorption has limited the idea of piping large-scale quantities of light. The light pipe uses the principle of Total Internal Reflection, with the light guided by very accurate prisms. The transmission of light directed into the end of a Light Pipe at an angle of less than 27.6 degrees is theoretically 100% efficient. The author describes its uses and advantages for lighting offices, cold storage areas, difficult access and hazardous areas, and for solar lighting. Future directions will be to improve the economics and accuracy of the technology. 4 references, 2 figures.

Hockey, S.N.

1985-08-01T23:59:59.000Z

428

Artificial light and plant growth  

NLE Websites -- All DOE Office Websites (Extended Search)

Artificial light and plant growth Name: Lim Age: NA Location: NA Country: NA Date: NA Question: What color of artificial light works the best in plant growth? Replies:...

429

Lighting Controls | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

fluorescent lighting fixtures rather than replace them. Dimmers and LEDs Some light-emitting diode (LED) lightbulbs can be used with dimmers. LED bulbs and fixtures must be...

430

Light Field Appearance Manifolds  

E-Print Network (OSTI)

Abstract. Statistical shape and texture appearance models are powerful image representations, but previously had been restricted to 2D or 3D shapes with smooth surfaces and lambertian reflectance. In this paper we present a novel 3D appearance model using image-based rendering techniques, which can represent complex lighting conditions, structures, and surfaces. We construct a light field manifold capturing the multi-view appearance of an object class and extend the direct search algorithm of Cootes and Taylor to match new light fields or 2D images of an object to a point on this manifold. When matching to a 2D image the reconstructed light field can be used to render unseen views of the object. Our technique differs from previous view-based active appearance models in that model coefficients between views are explicitly linked, and that we do not model any pose variation within the shape model at a single view. It overcomes the limitations of polygonal based appearance models and uses light fields that are acquired in real-time. 1

Chris Mario Christoudias; Trevor Darrell

2004-01-01T23:59:59.000Z

431

Comparison of the effect of outdoor exposure on the optical properties of solar mirrors and transparent encapsulant materials  

DOE Green Energy (OSTI)

The effects of outdoor exposure on solar mirrors and transparent encapsulant materials are assessed and compared. The encapsulant materials tested included glasses, polymers and silicones. Samples of the materials were placed on stationary exposure racks in six locations that represented urban, desert, oceanside and high altitude mountain areas. Samples were removed periodically for optical characterizations. The spectral hemispherical and diffuse reflectance of the mirror samples and the spectral hemispherical transmittance and diffuse reflectance of the encapsulant materials was measured. The relative normal hemispherical transmittance of the encapsulant materials was measured. Correlations between the glass and mirror data showed that the average diffuse reflectance losses were six times larger for the mirrors than for the glass samples. The average specular reflectance losses for the mirror samples were seven times as large as the average hemispherical transmittance losses for the glass samples. These correlations may enable one to predict the performance of mirrors made using the other encapsulant materials for superstrates. It was found that the urban and oceanside sites were the dirtiest, while the desert and mountain sites were the cleanest. Average specular reflectance losses varied from 4% at the cleanest site to 50% at the dirtiest site. The range in hemispherical transmittance losses for the encapsulant materials varied between 0% and 6%. At one site, the average daily specular reflectance losses were .04% for the mirror samples and average daily hemispherical transmittance losses were about .01% for the glass samples. The polymer materials degraded somewhat more rapidly than the glasses, and the silicones irreversible degraded too rapidly and severely to be useful for either photovoltaic or solar thermal applications.

Dake, L.S.; Lind, M.A.; Maag, C.R.

1981-09-01T23:59:59.000Z

432

Lighting and Surfaces 11.1 Introduction to Lighting  

E-Print Network (OSTI)

-object-at-a-time. "Intrinsic" light is the light emitted by the object itself, such as the glow from a TV screen, a light-emitting diode, or a star. "Ambient" light is an illumination that seems to come from all sides. In the real

Boyd, John P.

433

TOPIC Brief BUILDING TECHNOLOGIES PROGRAM Lighting: Residential...  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting: Residential and Commercial Requirements TOPIC BRIEF 1 Lighting: Residential and Commercial Requirements Residential Lighting Requirements The 2009 International Energy...

434

July 18, 2012 Using QECBs for Street Lighting Upgrades  

E-Print Network (OSTI)

lighting technologies (e.g. light-emitting diodes, induction lighting) can reduce street light energy

435

National Synchrotron Light Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Environmental Assessment Environmental Assessment Proposed Upgrade and Improvement of the National Synchrotron Light Source Complex at Brookhaven National Laboratory, Upton, New York This Environmental Assessment addresses the proposed action by the U.S. Department of Energy to upgrade the facilities of the National Synchrotron Light Source Complex, namely the National Synchrotron Light Source (NSLS), the Accelerator Test Facility and the Source Development Laboratory. The environmental effects of a No-Action Alternative as well as a Proposed Action are evaluated in the Environmental Assessment. The “NSLS Environmental Assessment Fact Sheet” link below leads to a one-page summary of the Environmental Assessment. The “NSLS Environmental Assessment” link below leads to the whole 41-page

436

Lighting Technology Panel  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technology Panel Technology Panel Federal Utility Partnership Working Group N b 2009 November 1 1 8, 2009 Doug Avery Southern California Edison Southern California Edison National Energy Conservation M d t Mandates * There are Federal and State Mandates to reduce energy consumption - California Investor Owned Electric Utilities are ordered to save around 3 Billion kWh's each y year from 2007-2113 - Federal buildings ordered to reduce electrical Federal buildings ordered to reduce electrical energy consumption 35% by 2012 Energy Consump ption gy Lighting accounts for 42 7% of energy consumption Lighting accounts for 42.7% of energy consumption Data Courtesy of SDG&E Data Courtesy of SDG&E Energy Consump ption gy More than ¾ of the lighting load is non-residential. Data Courtesy of SDG&E

437

Pupillary efficient lighting system  

DOE Patents (OSTI)

A lighting system having at least two independent lighting subsystems each with a different ratio of scotopic illumination to photopic illumination. The radiant energy in the visible region of the spectrum of the lighting subsystems can be adjusted relative to each other so that the total scotopic illumination of the combined system and the total photopic illumination of the combined system can be varied independently. The dilation or contraction of the pupil of an eye is controlled by the level of scotopic illumination and because the scotopic and photopic illumination can be separately controlled, the system allows the pupil size to be varied independently of the level of photopic illumination. Hence, the vision process can be improved for a given level of photopic illumination. 5 figs.

Berman, S.M.; Jewett, D.L.

1989-04-14T23:59:59.000Z

438

Light harvesting arrays  

DOE Patents (OSTI)

A light harvesting array useful for the manufacture of devices such as solar cells comprises: (a) a first substrate comprising a first electrode; and (b) a layer of light harvesting rods electrically coupled to the first electrode, each of the light harvesting rods comprising a polymer of Formula I: X.sup.1.paren open-st.X.sup.m+1).sub.m (I) wherein m is at least 1, and may be from two, three or four to 20 or more; X.sup.1 is a charge separation group (and preferably a porphyrinic macrocycle, which may be one ligand of a double-decker sandwich compound) having an excited-state of energy equal to or lower than that of X.sup.2, and X.sup.2 through X.sup.m+1 are chromophores (and again are preferably porphyrinic macrocycles).

Lindsey, Jonathan S. (Raleigh, NC)

2002-01-01T23:59:59.000Z

439

Pupillary efficient lighting system  

DOE Patents (OSTI)

A lighting system having at least two independent lighting subsystems each with a different ratio of scotopic illumination to photopic illumination. The radiant energy in the visible region of the spectrum of the lighting subsystems can be adjusted relative to each other so that the total scotopic illumination of the combined system and the total photopic illumination of the combined system can be varied independently. The dilation or contraction of the pupil of an eye is controlled by the level of scotopic illumination and because the scotopic and photopic illumination can be separately controlled, the system allows the pupil size to be varied independently of the level of photopic illumination. Hence, the vision process can be improved for a given level of photopic illumination.

Berman, Samuel M. (San Francisco, CA); Jewett, Don L. (Mill Valley, CA)

1991-01-01T23:59:59.000Z

440

Heavy-to-light form factors on the light cone  

E-Print Network (OSTI)

The light cone method provides a convenient non-perturbative tool to study the heavy-to-light form factors. We construct a light cone quark model utilizing the soft collinear effective theory. In the leading order of effective theory, the ten $B$ to light physical form factors are reduced to three universal form factors which can be calculated as overlaps of hadron light front wave functions in the light cone quark model. The numerical results show that the leading contribution is close to the results from other approaches. The $q^2$ dependence of the heavy-to-light form factors are also presented.

Cai-Dian Lu; Wei Wang; Zheng-Tao Wei

2007-01-31T23:59:59.000Z

Note: This page contains sample records for the topic "outdoor lighting mv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Deficiencies of Lighting Codes and Ordinances in Controlling Light Pollution from Parking Lot Lighting Installations.  

E-Print Network (OSTI)

??The purpose of this research was to identify the main causes of light pollution from parking lot electric lighting installations and highlight the deficiencies of (more)

Royal, Emily

2012-01-01T23:59:59.000Z

442

Wisconsin Business Sheds Light on Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Wisconsin Business Sheds Light on Lighting Wisconsin Business Sheds Light on Lighting Wisconsin Business Sheds Light on Lighting April 29, 2010 - 4:59pm Addthis When this photograph was taken, the upper floors of Wisconsin’s Department of Transportation were using a new lighting plan from EPS, while the lower ones were still using the pre-audit lighting scheme. | Photo Courtesy of Energy Performance Specialists, LLC When this photograph was taken, the upper floors of Wisconsin's Department of Transportation were using a new lighting plan from EPS, while the lower ones were still using the pre-audit lighting scheme. | Photo Courtesy of Energy Performance Specialists, LLC Joshua DeLung Wisconsin-based Energy Performance Specialists LLC is helping clients reduce energy consumption in a very simple way-by just using less.

443

Radioluminescent lighting technology  

SciTech Connect

The glow-in-the-dark stereotype that characterizes the popular image of nuclear materials is not accidental. When the French scientist, Henri Becquerel, first discovered radioactivity in 1896, he was interested in luminescence. Radioluminescence, the production of light from a mixture of energetic and passive materials, is probably the oldest practical application of the unstable nucleus. Tritium-based radioluminescent lighting, in spite of the biologically favorable character of the gaseous tritium isotope, was included in the general tightening of environmental and safety regulations. Tritium light manufacturers would have to meet two fundamental conditions: (1) The benefit clearly outweighed the risk, to the extent that even the perceived risk of a skeptical public would be overcome. (2) The need was significant enough that the customer/user would be willing and able to afford the cost of regulation that was imposed both in the manufacture, use and eventual disposal of nuclear materials. In 1981, researchers at Oak Ridge National Laboratory were investigating larger radioluminescent applications using byproduct nuclear material such as krypton-85, as well as tritium. By 1982, it appeared that large source, (100 Curies or more) tritium gas tube, lights might be useful for marking runways and drop zones for military operations and perhaps even special civilian aviation applications. The successful development of this idea depended on making the light bright enough and demonstrating that large gas tube sources could be used and maintained safely in the environment. This successful DOE program is now in the process of being completed and closed-out. Working closely with the tritium light industry, State governments and other Federal agencies, the basic program goals have been achieved. This is a detailed report of what they have learned, proven, and discovered. 91 refs., 29 figs., 5 tabs. (JF)

1990-01-01T23:59:59.000Z

444

Fiberoptic home lighting  

Science Conference Proceedings (OSTI)

Initial effort on this grant project was to construct a model that would demonstrate the feasibility of various lighting theories. Testing of suitable materials for utilization as fibreoptic components was the second priority. The material chosen for the project was 5/8 inch diameter plexiglas rod. The next step involved determining the limitations and other properties of the plexiglas rod. The final factor in developing a useable system involved testing different types and colors of light and their ability to be transmitted by the optic fibre. The culmination of the research and testing resulted in the demonstration projects.

Keleher, D.

1982-01-01T23:59:59.000Z

445

Energy 101: Lighting Choices | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting Choices Energy 101: Lighting Choices Addthis Below is the text version for the Energy 101: Lighting Choices video: The video opens with "Energy 101: Lighting Choices."...

446

Lighting Principles and Terms | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Principles and Terms Lighting Principles and Terms July 29, 2012 - 5:20pm Addthis Light quantity, energy consumption, and light quality are the basic principles of lighting. |...

447

Solid-State Lighting: OLED Basics  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting: OLED Basics on Twitter Bookmark Solid-State Lighting: OLED Basics on Google Bookmark Solid-State Lighting: OLED Basics on Delicious Rank Solid-State Lighting:...

448

Light Logger Placement Guidelines for Residential Lighting Studies  

Science Conference Proceedings (OSTI)

New technological advancements in lighting have increased the efficiency of residential lighting loads. Light loggers, which use a photocell to sense when lights are on or off, provide valuable metering information for use in measuring technology effectiveness and designing marketing programs. Placement of the loggers is critical to the accuracy and reliability of the measurements. This report provides placement recommendations for various types of lighting, expected accuracy compared to metered energy, ...

1996-03-28T23:59:59.000Z

449

Good lighting with energy conservation  

SciTech Connect

The publicity and economic impact of the oil embargo of 1973-74 has frequently caused over-reactive, indiscriminate reductions in lighting without eliminating many of the truly energy-wasteful aspects of lighting system usage. With current technology and a clear knowledge of the lighting requirements significant contributions to energy conservation can be achieved without unnecessarily sacrificing the benefits of good lighting.

Clark, G.W.

1976-01-01T23:59:59.000Z

450

Another Side of Light - D  

NLE Websites -- All DOE Office Websites (Extended Search)

D. Three quantum phenomena D. Three quantum phenomena In fluorescence, matter absorbs light waves of a high frequency and then emits light of the same or lower frequency. This process was studied and named by George Gabriel Stokes in the mid-19th century. Today, fluorescence is familiar to us from fluorescent light bulbs. A fluorescent bulb's filament produces ultraviolet light, which is absorbed by the bulb's inner coating, which then emits lower-frequency visible light-more visible light than an incandescent bulb produces with the same wattage. According to the hypothesis of light quanta, during fluorescence an atom absorbs a quantum of light whose energy is proportional to the light wave's frequency. If the atom doesn't supply any extra energy of its own, the light quantum emitted should either have the same energy or less energy

451

Tips: Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting Lighting Tips: Lighting May 4, 2012 - 3:16pm Addthis Lighting Choices Save You Money. Energy-efficient light bulbs are available in a wide variety of sizes and shapes. Lighting Choices Save You Money. Energy-efficient light bulbs are available in a wide variety of sizes and shapes. What does this mean for me? Replacing 15 inefficient incandescent bulbs in your home with energy-saving bulbs could save you about $50 per year. For the greatest savings, replace your old incandescent bulbs with ENERGY STAR-qualified bulbs. An average household dedicates about 10% of its energy budget to lighting. Switching to energy-efficient lighting is one of the fastest ways to cut your energy bills. Timers and motion sensors save you even more money by reducing the amount of time lights are on but not being used.

452

Technology reviews: Lighting systems  

SciTech Connect

We present a representative review of existing, emerging, and future technology options in each of five hardware and systems areas in envelope and lighting technologies: lighting systems, glazing systems, shading systems, daylighting optical systems, and dynamic curtain wall systems. The term technology is used here to describe any design choice for energy efficiency, ranging from individual components to more complex systems to general design strategies. The purpose of this task is to characterize lighting system in the state of the art in envelope and lighting technologies in order to identify those with promise for advanced integrated systems, with an emphasis on California commercial buildings. For each technology category, the following activities have been attempted to the extent possible: Identify key performance characteristics and criteria for each technology. Determine the performance range of available technologies. Identify the most promising technologies and promising trends in technology advances. Examine market forces and market trends. Develop a continuously growing in-house database to be used throughout the project. A variety of information sources have been used in these technology characterizations, including miscellaneous periodicals, manufacturer catalogs and cut sheets, other research documents, and data from previous computer simulations. We include these different sources in order to best show the type and variety of data available, however publication here does not imply our guarantee of these data. Within each category, several broad classes are identified, and within each class we examine the generic individual technologies that fall into that class.

Schuman, J.; Rubinstein, F.; Papamichael, K.; Beltran, L.; Lee, E.S.; Selkowitz, S.

1992-09-01T23:59:59.000Z

453

Windows and lighting program  

SciTech Connect

More than 30% of all energy use in buildings is attributable to two sources: windows and lighting. Together they account for annual consumer energy expenditures of more than $50 billion. Each affects not only energy use by other major building systems, but also comfort and productivity -- factors that influence building economics far more than does direct energy consumption alone. Windows play a unique role in the building envelope, physically separating the conditioned space from the world outside without sacrificing vital visual contact. Throughout the indoor environment, lighting systems facilitate a variety of tasks associated with a wide range of visual requirements while defining the luminous qualities of the indoor environment. Windows and lighting are thus essential components of any comprehensive building science program. Despite important achievements in reducing building energy consumption over the past decade, significant additional savings are still possible. These will come from two complementary strategies: (1) improve building designs so that they effectively apply existing technologies and extend the market penetration of these technologies; and (2) develop advanced technologies that increase the savings potential of each application. Both the Windows and Daylighting Group and the Lighting System Research Group have made substantial contributions in each of these areas, and continue to do so through the ongoing research summarized here. 23 refs., 16 figs.

1990-06-01T23:59:59.000Z

454

Incandescent Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Incandescent Lighting Incandescent Lighting Incandescent Lighting October 17, 2013 - 6:15pm Addthis Incandescent lighting is the most common, and least energy efficient, type of lighting used in homes. | Photo courtesy of ©iStockphoto/TokenPhoto. Incandescent lighting is the most common, and least energy efficient, type of lighting used in homes. | Photo courtesy of ©iStockphoto/TokenPhoto. Incandescent lamps are often considered the least energy efficient type of electric lighting commonly found in residential buildings. Although inefficient, incandescent lamps possess a number of key advantages--they are inexpensive to buy, turn on instantly, are available in a huge array of sizes and shapes and provide a pleasant, warm light with excellent color rendition. However, because of their relative inefficiency and short life spans, they

455

Incandescent Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Incandescent Lighting Incandescent Lighting Incandescent Lighting October 17, 2013 - 6:15pm Addthis Incandescent lighting is the most common, and least energy efficient, type of lighting used in homes. | Photo courtesy of ©iStockphoto/TokenPhoto. Incandescent lighting is the most common, and least energy efficient, type of lighting used in homes. | Photo courtesy of ©iStockphoto/TokenPhoto. Incandescent lamps are often considered the least energy efficient type of electric lighting commonly found in residential buildings. Although inefficient, incandescent lamps possess a number of key advantages--they are inexpensive to buy, turn on instantly, are available in a huge array of sizes and shapes and provide a pleasant, warm light with excellent color rendition. However, because of their relative inefficiency and short life spans, they

456

Fluorescent Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fluorescent Lighting Fluorescent Lighting Fluorescent Lighting October 17, 2013 - 5:44pm Addthis Fluorescent Lighting Fluorescent Lighting Fluorescent lamps use 25%-35% of the energy used by incandescent products to provide a similar amount of light. They also last about 10 times longer (7,000-24,000 hours). The two general types of fluorescent lamps are: Compact fluorescent lamps (CFLs) -- commonly found with integral ballasts and screw bases, these are popular lamps often used in household fixtures Fluorescent tube and circline lamps -- typically used for task lighting such as garages and under cabinet fixtures, and for lighting large areas in commercial buildings. CFLs CFLs combine the energy efficiency of fluorescent lighting with the convenience and popularity of incandescent fixtures. CFLs fit most fixtures

457

Generation of a Parabolic Trough Collector Efficiency Curve from Separate Measurements of Outdoor Optical Efficiency and Indoor Receiver Heat Loss: Preprint  

DOE Green Energy (OSTI)

The overall efficiency of a parabolic trough collector is a function of both the fraction of direct normal radiation absorbed by the receiver (the optical efficiency) and the heat lost to the environment when the receiver is at operating temperature. The overall efficiency can be determined by testing the collector under actual operating conditions or by separately measuring these two components. This paper describes how outdoor measurement of the optical efficiency is combined with laboratory measurements of receiver heat loss to obtain an overall efficiency curve. Further, it presents a new way to plot efficiency that is more robust over a range of receiver operating temperatures.

Kutscher, C.; Burkholder, F.; Stynes, K.

2010-10-01T23:59:59.000Z

458

Gradient Combinatorial Libraries via Modulated Light ...  

Science Conference Proceedings (OSTI)

... Libraries via Modulated Light Exposure. Bookmark and Share Gradient Combinatorial Libraries via Modulated Light Exposure. ...

459

Lighting for video February 23, 2012  

E-Print Network (OSTI)

) LED light panel, C) HMI/MH light with diffusion, D) fluorescent ("kino flo") style light fluorescent or LED lights. In the earlier days this was created by bouncing light off reflectors, for example a soft light as a key light (LED or fluorescent) and then use available lights in the back- ground

Porr, Bernd

460

Edmund G. Brown Jr. LIGHTING CALIFORNIA'S FUTURE  

E-Print Network (OSTI)

Edmund G. Brown Jr. Governor LIGHTING CALIFORNIA'S FUTURE: SMART LIGHT-EMITTING DIODE LIGHTING's Future: Smart LightEmitting Diode Lighting in Residential Fans. California Energy Commission, PIER. For the Smart Light emitting Diode Lighting in Residential Fans Project, the California Lighting Technology

Note: This page contains sample records for the topic "outdoor lighting mv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

National Synchrotron Light Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Report 2001 Report 2001 National Synchrotron Light Source For the period October 1, 2000 through September 30, 2001 Introduction Science Highlights Year in Review Operations Publications Abstracts Nancye Wright & Lydia Rogers The National Synchrotron Light Source Department is supported by the Office of Basic Energy Sciences United States Department of Energy Washington, D.C. Brookhaven National Laboratory Brookhaven Science Associates, Inc. Upton, New York 11973 Under Contract No. DE-AC02-98CH10886 Mary Anne Corwin Steven N. Ehrlich & Lisa M. Miller Managing Editor Science Editors Production Assistants Cover images (clockwise from top left) 1. from Science Highlight by K.R. Rajashankar, M.R. Chance, S.K. Burley, J. Jiang, S.C. Almo, A. Bresnick, T. Dodatko, R. Huang, G. He,

462

Light amplification using semiconductors  

Science Conference Proceedings (OSTI)

During the summer of 1953, John von Neumann discussed his ideas concerning light amplification using semiconductors with Edward Teller. In September of that year, von Neumann sent a manuscript containing his ideas and calculations on this subject to Teller for his comments. To the best of our knowledge, von Neumann did not take time to work further on these ideas, and the manuscript remained unpublished. These previously unpublished writings of John von Neumann on the subject of light amplification in semiconductors are printed as a service to the laser community. While von Neumann's original manuscript and his letter to Teller are available to anyone who visits the Library of Congress, it is much more convenient to have this paper appear in an archival journal.

Dupuis, R.D.

1987-06-01T23:59:59.000Z

463

Fusion pumped light source  

DOE Patents (OSTI)

Apparatus is provided for generating energy in the form of light radiation. A fusion reactor is provided for generating a long, or continuous, pulse of high-energy neutrons. The neutron flux is coupled directly with the lasing medium. The lasing medium includes a first component selected from Group O of the periodic table of the elements and having a high inelastic scattering cross section. Gamma radiation from the inelastic scattering reactions interacts with the first component to excite the first component, which decays by photon emission at a first output wavelength. The first output wavelength may be shifted to a second output wavelength using a second liquid component responsive to the first output wavelength. The light outputs may be converted to a coherent laser output by incorporating conventional optics adjacent the lasing medium. 3 figs.

Pappas, D.S.

1988-09-01T23:59:59.000Z

464

Light from cosmic strings  

Science Conference Proceedings (OSTI)

The time-dependent metric of a cosmic string leads to an effective interaction between the string and photons--the ''gravitational Aharonov-Bohm'' effect--and causes cosmic strings to emit light. We evaluate the radiation of pairs of photons from cosmic strings and find that the emission from cusps, kinks and kink-kink collisions occurs with a flat spectrum at all frequencies up to the string scale. Further, cusps emit a beam of photons, kinks emit along a curve, and the emission at a kink-kink collision is in all directions. The emission of light from cosmic strings could provide an important new observational signature of cosmic strings that is within reach of current experiments for a range of string tensions.

Steer, Daniele A.; Vachaspati, Tanmay [APC 10 rue Alice Domon et Leonie Duquet, 75205 Paris Cedex 13 (France); Physics Department, Arizona State University, Tempe, Arizona 85287 (United States)

2011-02-15T23:59:59.000Z

465

Clusters in Light Nuclei  

E-Print Network (OSTI)

A great deal of research work has been undertaken in the alpha-clustering study since the pioneering discovery, half a century ago, of 12C+12C molecular resonances. Our knowledge of the field of the physics of nuclear molecules has increased considerably and nuclear clustering remains one of the most fruitful domains of nuclear physics, facing some of the greatest challenges and opportunities in the years ahead. In this work, the occurence of "exotic" shapes in light N=Z alpha-like nuclei is investigated. Various approaches of superdeformed and hyperdeformed bands associated with quasimolecular resonant structures are presented. Results on clustering aspects are also discussed for light neutron-rich Oxygen isotopes.

C. Beck; P. Papka; A. Sanchez i Zafra; S. Thummerer; F. Azaiez; P. Bednarczyk; S. Courtin; D. Curien; O. Dorvaux; A. Goasduff; D. Lebhertz; A. Nourreddine; M. Rousseau; M. -D. Salsac; W. von Oertzen; B. Gebauer; C. Wheldon; Tz. Kokalova; G. Efimov; V. Zherebchevsky; Ch. Schulz; H. G. Bohlen; D. Kamanin; G. de Angelis; A. Gadea; S. Lenzi; D. R. Napoli; S. Szilner; M. Milin; W. N. Catford; D. G. Jenkins; G. Royer

2010-11-15T23:59:59.000Z

466

Fusion pumped light source  

DOE Patents (OSTI)

Apparatus is provided for generating energy in the form of light radiation. A fusion reactor is provided for generating a long, or continuous, pulse of high-energy neutrons. The neutron flux is coupled directly with the lasing medium. The lasing medium includes a first component selected from Group O of the periodic table of the elements and having a high inelastic scattering cross section. Gamma radiation from the inelastic scattering reactions interacts with the first component to excite the first component, which decays by photon emission at a first output wavelength. The first output wavelength may be shifted to a second output wavelength using a second liquid component responsive to the first output wavelength. The light outputs may be converted to a coherent laser output by incorporating conventional optics adjacent the laser medium.

Pappas, Daniel S. (Los Alamos, NM)

1989-01-01T23:59:59.000Z

467

Developing architectural lighting representations  

E-Print Network (OSTI)

This paper reports on the development of a visualization system for architectural lighting designers. It starts by motivating the problem as both complex in its physics and social organization. Three iterations of prototypes for displaying time and space varying phenomena are discussed. Fieldwork is presented to identify where in practice they will be most effective. A set of user studies, one of which is analyzed in fine-grained detail, show how building designers incorporate visualization on hypothetical design problems. This has positive implications for both energy efficiency and lighting quality in buildings. CR Categories: H.1.2 [Models and Principles]: User/Machine SystemsHuman factors; D.2.2 [Software Engineering]: Design

Daniel C. Glaser; Roger Tan

2003-01-01T23:59:59.000Z

468

Efficient Light Sources Today  

E-Print Network (OSTI)

This paper reviews new lamp and lighting technology in terms of application and economic impact. Included are the latest advances in High Intensity Discharge systems, energy saving fluorescent lamps and ballasts, and the new state of the art high performance fluorescent systems. Cost analyses will show that typical owning and operating cost reductions of 15 to 65% can be achieved without sacrificing illumination levels when the right system is chosen and properly applied.

Hart, A. L.

1982-01-01T23:59:59.000Z

469

New Lighting Technologies  

Science Conference Proceedings (OSTI)

This Electric Power Research Institute (EPRI) technical update continues the technical assessment of advanced lighting technologies in the following product areaslinear LED T8 fluorescent replacements, Edison-based dimmable LED lamps, commercial replacement side-lit LED fixtures, Edison-based reduced-consumption halogen lamps designed to replace 100W incandescent lamps, high bay induction LED lamps, and architectural LED lamps. Many of the products in this years report are designed as ...

2012-10-08T23:59:59.000Z

470

Light-Matter Quantum Interface  

E-Print Network (OSTI)

We propose a quantum interface which applies multiple passes of a pulse of light through an atomic sample with phase/polarization rotations in between the passes. Our proposal does not require nonclassical light input or measurements on the system, and it predicts rapidly growing unconditional entanglement of light and atoms from just coherent inputs. The proposed interface makes it possible to achieve a number of tasks within quantum information processing including teleportation between light and atoms, quantum memory for light and squeezing of atomic and light variables.

K. Hammerer; K. Molmer; E. S. Polzik; J. I. Cirac

2003-12-18T23:59:59.000Z

471

Lighting the Way with Compact Fluorescent Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting the Way with Compact Fluorescent Lighting Lighting the Way with Compact Fluorescent Lighting Lighting the Way with Compact Fluorescent Lighting April 28, 2009 - 5:00am Addthis John Lippert There is a major push today to get homeowners to adopt compact fluorescent lamp (CFL) light bulbs. They have been on the market for nearly three decades, and many homeowners still do not use them widely. But the tide is definitely turning. Their availability and the percentage of homeowners familiar with the technology and purchasing them for their homes have been steadily rising. The products have improved considerably compared to early products, and their prices have plummeted. The ENERGY STAR® Change a Light, Change the World Campaign has been running now for more than half a dozen years. This campaign is designed to

472

Solid-State Lighting: Municipal Consortium LED Street Lighting...  

NLE Websites -- All DOE Office Websites (Extended Search)

Boston, MA to someone by E-mail Share Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Boston, MA on Facebook Tweet about...

473

Solid-State Lighting: Municipal Consortium LED Street Lighting...  

NLE Websites -- All DOE Office Websites (Extended Search)

Dallas, TX to someone by E-mail Share Solid-State Lighting: Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Dallas, TX on Facebook Tweet about...

474

Energy Savings Potential of Solid State Lighting in General Lighting...  

NLE Websites -- All DOE Office Websites (Extended Search)

by Arthur D. Little, Inc. for U.S. Department of Energy Energy Savings Potential of Solid State Lighting in General Lighting Applications Final Report April 2001 Energy Savings...

475

Lighting the Way with Compact Fluorescent Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting the Way with Compact Fluorescent Lighting Lighting the Way with Compact Fluorescent Lighting Lighting the Way with Compact Fluorescent Lighting April 28, 2009 - 5:00am Addthis John Lippert There is a major push today to get homeowners to adopt compact fluorescent lamp (CFL) light bulbs. They have been on the market for nearly three decades, and many homeowners still do not use them widely. But the tide is definitely turning. Their availability and the percentage of homeowners familiar with the technology and purchasing them for their homes have been steadily rising. The products have improved considerably compared to early products, and their prices have plummeted. The ENERGY STAR® Change a Light, Change the World Campaign has been running now for more than half a dozen years. This campaign is designed to

476

Physics of light  

Science Conference Proceedings (OSTI)

A fourth interpretation for the principle of light invariance is proposed. After Maxwell equations, relativity, Lorentz group, another possibility stands into consider the Lorentz group representations as species. By specie one means fields with same nature under light invariance. For instance, given a ((1/2),(1/2)) representation, instead of just one specific field, we should associate to it the potential fields specie. Thus, starting from such fields specie interpretation the features of a certain potential field A{sub {mu}I} will be determined in terms of its associated fields set {l_brace}A{sub {mu}I}{r_brace}, where I means a diversity index. It says that, the original field equation to be searched for a given field description is that one corresponding to the associated group of fields, and not more, for the field being taken isolated. It introduces the meaning of parts enfolded in the whole through whole relativistic equations. There is a more primitive equation to be understood. Instead Maxwell equation this fourth light invariance interpretation is guiding us to a more basic equation describing a fields set {l_brace}A{sub {mu}I}{r_brace}. It will be entitled as Global Maxwell equation. Three steps are necessary for characterizing this Global Maxwell equation. The first one is to derive on abelian terms a generic expression for the fields set {l_brace}A{sub {mu}I}{r_brace}. Further, show the diversity between these associated fields. Prove that every field carries a different quantum number (spin, mass, charges; C, P, T, CPT). The third one is on the photon singularity. Being the light invariance porter, it should be distinguished from others fields. This is done through the group gauge directive symmetry and Noether current. A Global Lorentz force complements the Global Maxwell by introducing three types of force. The first one generalizes the usual Lorentz force while the last two introduce relationships between fields and masses and fields with fields. A Physics of Light is derived. Based on such interpretation relating fields with same Lorentz nature, the electromagnetism is enlarged. The electromagnetic phenomena is not more restricted to Maxwell and electric charge. It englobes Maxwell and produces new types of electromagnetic fields and sectors. It centers the photon at its origin, new aspects as photonic charges and selfinteracting photons are obtained. As a case of this new electromagnetic spectrum one can take the set {l_brace}{gamma}Z{sup 0},W{sup {+-}}{r_brace}. It provides an electromagnetism involving photonic, massive, neutral, electric charged sectors which may antecede the electroweak unification.

Doria, R. [Aprendanet, Petropolis, 25600 (Brazil)

2012-09-24T23:59:59.000Z

477

Solid-State Lighting: Contacts  

NLE Websites -- All DOE Office Websites (Extended Search)

Contacts Contacts Printable Version Share this resource Send a link to Solid-State Lighting: Contacts to someone by E-mail Share Solid-State Lighting: Contacts on Facebook Tweet about Solid-State Lighting: Contacts on Twitter Bookmark Solid-State Lighting: Contacts on Google Bookmark Solid-State Lighting: Contacts on Delicious Rank Solid-State Lighting: Contacts on Digg Find More places to share Solid-State Lighting: Contacts on AddThis.com... Contacts Web site and program contacts are provided below. Website Contact Send us your comments, report problems, and/or ask questions about information on this site. Program Contacts Contact information for the Solid-State Lighting Program. Contacts | Web Site Policies | U.S. Department of Energy | USA.gov Content Last Updated: 02/14

478

Solid-State Lighting: Publications  

NLE Websites -- All DOE Office Websites (Extended Search)

Publications to someone by Publications to someone by E-mail Share Solid-State Lighting: Publications on Facebook Tweet about Solid-State Lighting: Publications on Twitter Bookmark Solid-State Lighting: Publications on Google Bookmark Solid-State Lighting: Publications on Delicious Rank Solid-State Lighting: Publications on Digg Find More places to share Solid-State Lighting: Publications on AddThis.com... Conferences & Meetings Presentations Publications Postings Articles Program Fact Sheets Technology Fact Sheets CALiPER Reports GATEWAY Reports LED Lighting Facts Reports Project Reports Studies and Reports Technology Roadmaps Product Performance Guides Webcasts Videos Tools Publications The Solid-State Lighting (SSL) program produces a comprehensive portfolio of publications, ranging from overviews of the program's research

479

Solid-State Lighting: Events  

NLE Websites -- All DOE Office Websites (Extended Search)

Events Printable Version Share this resource Send a link to Solid-State Lighting: Events to someone by E-mail Share Solid-State Lighting: Events on Facebook Tweet about Solid-State...

480

Solid-State Lighting: Partnerships  

NLE Websites -- All DOE Office Websites (Extended Search)

About the Program Printable Version Share this resource Send a link to Solid-State Lighting: Partnerships to someone by E-mail Share Solid-State Lighting: Partnerships on Facebook...

Note: This page contains sample records for the topic "outdoor lighting mv" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Another Side of Light - C  

Office of Scientific and Technical Information (OSTI)

light waves in a furnace should act much the same if they behave according to Planck's quantum law. As we noted above, the intensity of the lower-frequency light is described...

482

Data:8b19fc0e-6bbe-4024-bef1-cdff58042395 | Open Energy Information  

Open Energy Info (EERE)

Coop of Mich Effective date: 20101002 End date if known: Rate name: Outdoor Lighting - LED Alternative for 100 watt HPS Sector: Lighting Description: OUTDOOR PROTECTIVE LIGHTING...

483

Data:997bcaad-7ed9-43e9-8bb6-4dea21be1bd6 | Open Energy Information  

Open Energy Info (EERE)

Energy Coop Effective date: 20111111 End date if known: Rate name: Outdoor Lighting - LED Alternative to 100 watt HPS Sector: Lighting Description: OUTDOOR LIGHTING SERVICE -...

484

Success Stories: Post Office Lighting  

... Post Office reduces energy, provides better lighting for multitasks in the home and office, and saves money. The system ...

485

Photodetector with enhanced light absorption  

DOE Patents (OSTI)

A photodetector including a light transmissive electrically conducting layer having a textured surface with a semiconductor body thereon. This layer traps incident light thereby enhancing the absorption of light by the semiconductor body. A photodetector comprising a textured light transmissive electrically conducting layer of SnO.sub.2 and a body of hydrogenated amorphous silicon has a conversion efficiency about fifty percent greater than that of comparative cells. The invention also includes a method of fabricating the photodetector of the invention.

Kane, James (Lawrenceville, NJ)

1985-01-01T23:59:59.000Z

486

Can dendritic cells see light?  

E-Print Network (OSTI)

There are many reports showing that low-level light/laser therapy (LLLT) can enhance wound healing,

Hamblin, Michael R.

487

Twenty Years of Lighting Research  

NLE Websites -- All DOE Office Websites (Extended Search)

our lighting laboratory, including the goniophotometer and luminaire thermal performance instrumentation, support the development of new products, such as efficient...

488

Obliquity factors for {sup 60}Co and 4, 10, and 18 MV x rays for concrete, steel, and lead and angles of incidence between 0{degrees} and 70{degrees}  

SciTech Connect

The attenuation of {sup 60}Co gamma rays and photons of 4, 10, and 18 MV x-ray beams by concrete, steel, and lead has been studied using the Monte Carlo technique for angles of incidence 0{degrees}, 30{degrees}, 45{degrees}, 60{degrees}, and 70{degrees}. Transmission factors have been determined down to < 2 x 10{sup {minus}5} in all cases. The results show that deviation from the obliquity factor increases with angle but is not significant for angles {le} 45{degrees}. AT 70{degrees} angle of incidence and a transmission factor of 10{sup {minus}5}, the obliquity factor varies between 1.2 and 1.9 for concrete, between 1.4 and 1.7 for steel, and between 1.4 and 1.5 for lead for the range of energies investigated. This amounts to an additional 86 and 50 cm of concrete, 25 and 23 cm of steel, and 8 and 14 cm of lead for {sup 60}Co and 18 MV x rays, respectively. The results for {sup 60}Co is concrete and lead are in good agreement with previously published experimental work. Fits to the data using mathematical models allow reconstruction of all data curves to better than 1% on average and 7% in the worst single case. 9 refs., 14 figs., 6 tabs.

Biggs, P.J. [Harvard Medical School, Boston, MA (United States)

1996-04-01T23:59:59.000Z

489

The lighting of underground mines  

SciTech Connect

This book describes mine lighting problems. It is intended as a textbook on mine lighting knowledge, a reference book for people needing information on the subject, and as a design guide for mine personnel who lack specific training in lighting principles.

Trotter, D.A.

1983-01-01T23:59:59.000Z

490

Lighting and the Bottom Line  

E-Print Network (OSTI)

A discussion of the cost of light and how it relates to the cost of people. The new Illuminating Engineering Society recommended method of determining lighting levels will be explained. Also several ways of providing good lighting to increase productivity while saving energy and money will be included in this presentation.

Christensen, M.

1981-01-01T23:59:59.000Z

491

Slow-light solitons revisited  

E-Print Network (OSTI)

We investigate propagation of slow-light solitons in atomic media described by the nonlinear $\\Lambda$-model. Under a physical assumption, appropriate to the slow light propagation, we reduce the $\\Lambda$-scheme to a simplified nonlinear model, which is also relevant to 2D dilatonic gravity. Exact solutions describing various regimes of stopping slow-light solitons can then be readily derived.

A. V. Rybin; I. P. Vadeiko; A. R. Bishop

2006-08-11T23:59:59.000Z

492

Arnold Schwarzenegger LIGHTING RESEARCH PROGRAM  

E-Print Network (OSTI)

fluorescent task lamp. The prototype used commercially available materials: 1watt light emitting diodes to the mounting board. Development of LightEmitting Diode Task Lamp using Advanced Technologies: Prototype 2 lightemitting diode task lamp. The problem of developing an energy efficient light emitting diode task lamp

493

Arnold Schwarzenegger LIGHTING RESEARCH PROGRAM  

E-Print Network (OSTI)

/or daylighting availability. Advanced Lighting Luminaries and Systems consisted of four projects focused· · · · · · Energy-Related Environmental Research Energy Systems Integration Environmentally Preferred Advanced and costs. Demand Responsive Lighting Systems comprised three projects that developed advanced lighting

494

Red light, green light | Y-12 National Security Complex  

NLE Websites -- All DOE Office Websites (Extended Search)

Red light, green light Red light, green light Red light, green light Posted: December 4, 2013 - 6:28pm After the National Nuclear Security Administration signaled Y-12 to begin resuming full operations after a potential furlough, Production Vice President Bill Tindal said Production had two objectives: refocus production employees on safety, security and quality, and ensure preparedness for normal operations. "It's tempting to jump right back in when you get the green light," Tindal said. "We were in an abnormal state that really shook people. Focusing on people came first." Production began with return-to-work briefings. "During the briefings, we asked employees what they were concerned about, what was causing them stress," Tindal said. "Another concept from the briefing was the theme

495

Comparing Light-Emitting Diode (LED) Street and Area Lighting to Traditional Lighting Technologies  

Science Conference Proceedings (OSTI)

Manufacturing advances have now made the use of light-emitting diode (LED) technology practical for street and area lighting. To better understand the application, the Electric Power Research Institute (EPRI) teamed with Southern Company and Gulf Power to install LED street lights at a demonstration site and measure their performance. The data showed several disadvantages for the LED lights, such as a lower efficacy compared to traditional technology and lower immunity to electrical disturbances, but an ...

2012-04-06T23:59:59.000Z

496

Lighting Group: Controls and Communications  

NLE Websites -- All DOE Office Websites (Extended Search)

Communications Communications Controls and Communications The Controls and Communications research activity investigates how digital technologies, such as Bluetooth, can be applied to building lighting control systems to increase building efficiency and improve occupant comfort and productivity. Projects range from embedded device networks applied to building lighting systems, to WiFi and environmental sensing and monitoring. light switch Current Projects IBECS (Integrated Building Environmental Communications System) Wireless Lighting Controls (with DUST Networks) HPCBS Advanced Digital Controls Building Control Systems Integration Completed Projects CEC Public Interest Energy Research (PIER) Projects 450 Golden Gate Project New Publications Standardizing Communication Between Lighting Devices: A Role for