National Library of Energy BETA

Sample records for order attachment 4-trip

  1. Attachment J-16 Portfolio Management Task Order 14-001

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mod 323 Attachment J-16 Portfolio Management Task Order 14-001 Statement of Work - 1 - Title: AMRP PBS 41 - Project Management / Project Controls Support Revision Number: 0 Date: September 17, 2013 Start: October 1, 2013 Finish: September 30, 2014 1.0 DESCRIPTION Mission Support Alliance (MSA) Portfolio Management (PFM) will provide the following project management/project controls support services as described below. The services will be performed in accordance with Contract DE-AC06-09RL14728,

  2. Photoswitchable method for the ordered attachment of proteins to surfaces

    DOE Patents [OSTI]

    Camarero, Julio A.; De Yoreo, James J.; Kwon, Youngeun

    2010-04-20

    Described herein is a method for the attachment of proteins to any solid support with control over the orientation of the attachment. The method is extremely efficient, not requiring the previous purification of the protein to be attached, and can be activated by UV-light. Spatially addressable arrays of multiple protein components can be generated by using standard photolithographic techniques.

  3. Photoswitchable method for the ordered attachment of proteins to surfaces

    DOE Patents [OSTI]

    Camarero, Julio A.; DeYoreo, James J.; Kwon, Youngeun

    2011-07-05

    Described herein is a method for the attachment of proteins to any solid support with control over the orientation of the attachment. The method is extremely efficient, not requiring the previous purification of the protein to be attached, and can be activated by UV-light. Spatially addressable arrays of multiple protein components can be generated by using standard photolithographic techniques.

  4. ATTACHMENT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ATTACHMENT 3 1. Identification Number: 2. Program/Project Title: 3. Recipient: 4. Reporting Requirements: A. MANAGEMENT REPORTING Progress Report Special Status Report Frequency No. of Copies Addressees Upload only 1 copy to the address in the next column at the interval specified in the previous column. https://www.eere- pmc.energy.gov/SubmitReports.aspx B. SCIENTIFIC/TECHNICAL REPORTING (Reports/Products must be submitted with appropriate DOE F 241. The 241 forms are available at

  5. Descriptions of ESPC Task Order Schedules and Placement of Pricing Information (IDIQ Attachment J-5)

    Office of Energy Efficiency and Renewable Energy (EERE)

    Document provides task order schedule descriptions and information on the placement of pricing for energy savings performance contracts (ESPCs).

  6. Attachment J-16 Portfolio Management Task Order 13-002 Title: DOE-HQ Security System Review and Assessment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Section J Contract No. DE-AC06-09RL14728 Modification 280 Attachment J-16 Portfolio Management Task Order 13-002 Title: DOE-HQ Security System Review and Assessment Revision Number: 0 Date: 04/11/2013 Start: 05/01/2013 Finish: 07/30/2013 1.0 DESCRIPTION The DOE Office of Environmental Management (EM) Headquarters Security System (HQSS) is installed at the EM Consolidated Business Center (CBC) in Cincinnati, OH and administered from DOE Headquarters in Washington, DC. HQSS has been running as a

  7. Attachment J-16 Portfolio Management Task Order 13-003 Revision 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    J-16 Portfolio Management Task Order 13-003 Revision 1 Title: DOE-RL AMB HGET Training Approval Process SIA Date: August 6, 2013 Start: August 6, 2013 Finish: November 30, 2013 1.0 DESCRIPTION Mission Support Alliance (MSA) will provide subject matter experts to provide facilitation and project management support for an Operating Excellence (OE) Structured Improvement Activity (SIA) for the Department of Energy Richland (DOE-RL) Assistant Manager for Business and Financial Operations (AMB)

  8. Development of a Chemoenzymatic-like and Photoswitchable Method for the Ordered Attachment of Proteins to Surfaces

    SciTech Connect (OSTI)

    Camarero, J A; Kwon, Y; Coleman, M

    2005-02-11

    Protein arrays are the best tool for the rapid analysis of a whole proteome thus helping to identify all the protein/protein interactions in a living cell and they can also be used as powerful biosensors. The objective of this proposal is to develop a new entropically activated ligation method based in the naturally occurring protein trans-splicing process. This method will be used for the generation of spatially addressable arrays of multiple protein components by standard photolithographic techniques. Key to our approach is the use of the protein trans-splicing process. This naturally occurring process will allow us to create a truly generic and highly efficient method for the covalent attachment of proteins through its C-terminus to any solid support.

  9. Attachment C

    Office of Environmental Management (EM)

    PLAN Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT ATTACHMENT C Page C-i ATTACHMENT C WASTE ANALYSIS PLAN TABLE OF CONTENTS C-0 Introduction and Attachment Highlights ........................................................................... 1 C-0a Waste Characterization ........................................................................................ 2 C-0b AK

  10. Attachment 4

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Reference Chart | Department of Energy 3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart Attachment 3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart PDF icon green_instructions_attach3.pdf More Documents & Publications Green Lease Policies and Procedures for Lease Acquisition Attachment 1: Green Lease Policies and Procedures for Lease Acquisition Microsoft Word - AL2008-05.doc

    1 of 6 High-Level Bases and Assumptions for the WTP

  11. Attachment B

    Office of Environmental Management (EM)

    B HAZARDOUS WASTE PERMIT APPLICATION PART A Waste Isolation Pilot Plant Hazardous Waste Permit April 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit April 2014 PERMIT ATTACHMENT B Page B-i of 52 ATTACHMENT B HAZARDOUS WASTE PERMIT APPLICATION PART A TABLE OF CONTENTS PART A - HAZARDOUS WASTE PERMIT APPLICATION ......................................................... 1 RCRA PART A APPLICATION CERTIFICATION

  12. Attachment D

    Office of Environmental Management (EM)

    RCRA CONTINGENCY PLAN Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT ATTACHMENT D Page D-i ATTACHMENT D RCRA CONTINGENCY PLAN TABLE OF CONTENTS Introduction ................................................................................................................................ 1 D-1 General Information

  13. Attachment E

    Office of Environmental Management (EM)

    E INSPECTION SCHEDULE, PROCESS AND FORMS Waste Isolation Pilot Plant Hazardous Waste Permit April 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit April 2014 PERMIT ATTACHMENT E Page E-i ATTACHMENT E INSPECTION SCHEDULE, PROCESS AND FORMS TABLE OF CONTENTS Introduction ................................................................................................................................. 1 E-1 Inspection Schedule

  14. Attachment F

    Office of Environmental Management (EM)

    TRAINING Waste Isolation Pilot Plant Hazardous Waste Permit December 21, 2012 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit December 21, 2012 PERMIT ATTACHMENT F Page F-i ATTACHMENT F PERSONNEL TRAINING TABLE OF CONTENTS Introduction ................................................................................................................................. 1 F-1 Outline of the Training Program

  15. Attachment G

    Office of Environmental Management (EM)

    G CLOSURE PLAN Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 PERMIT ATTACHMENT G Page G-i ATTACHMENT G CLOSURE PLAN TABLE OF CONTENTS Introduction ................................................................................................................................. 1 G-1 Closure Plan

  16. Attachment L

    Office of Environmental Management (EM)

    L WIPP GROUNDWATER DETECTION MONITORING PROGRAM PLAN Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 PERMIT ATTACHMENT L Page L-i ATTACHMENT L WIPP GROUNDWATER DETECTION MONITORING PROGRAM PLAN TABLE OF CONTENTS L-1 Introduction ..................................................................................................................... 1 L-1a Geologic and Hydrologic

  17. Attachment N

    Office of Environmental Management (EM)

    N VOLATILE ORGANIC COMPOUND MONITORING PLAN Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT ATTACHMENT N Page N-i ATTACHMENT N VOLATILE ORGANIC COMPOUND MONITORING PLAN TABLE OF CONTENTS N-1 Introduction ..................................................................................................................... 1 N-1a Background

  18. Attachment O

    Office of Environmental Management (EM)

    O WIPP MINE VENTILATION RATE MONITORING PLAN Waste Isolation Pilot Plant Hazardous Waste Permit May 8, 2012 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit May 8, 2012 PERMIT ATTACHMENT O Page O-1 of 14 1 ATTACHMENT O 2 WIPP MINE VENTILATION RATE MONITORING PLAN 3 TABLE OF CONTENTS 4 O-1 Definitions ....................................................................................................................... 2 5 O-2 Objective

  19. ATTACHMENT J

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Contract No. DE-AC02-07CH11358 Contract Modification No. 0145 Section J, Appendix A J-A-1 ATTACHMENT J.1 APPENDIX A ADVANCE UNDERSTANDINGS ON HUMAN RESOURCES Applicable to the...

  20. Fenestration Attachments

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fenestration Attachments 2016 Building Technologies Office Peer Review D. Charlie Curcija, DCCurcija@lbl.gov Lawrence Berkeley National Laboratory 2 Project Summary Budget: Total Project $K to Date: * DOE: $1,950 * Cost Share: $1,330 Total Project $K: * DOE: $3,750 * Cost Share: $2,000 (expected) Key Partners: Project Outcome: Develop validated simulation models and procedures for characterizing properties and energy impacts of a wide range of window attachments. Develop test methods for

  1. Attachment K

    Office of Environmental Management (EM)

    SOLID WASTE MANAGEMENT UNIT (SWMU) AND AREA OF CONCERN (AOC) TABLES Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT ATTACHMENT K Page K-i ATTACHMENT K SOLID WASTE MANAGEMENT UNIT (SWMU) AND AREA OF CONCERN (AOC) TABLES LIST OF TABLES Table Title Table K-1 Solid Waste Management Units (SWMUs) & Areas of Concern (AOCs) Requiring Corrective Action Table K-2 SWMUs & AOCs

  2. Window Attachments

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DCCurcija@lbl.gov Lawrence Berkeley National Laboratory Window Attachments 2015 Building Technologies Office Peer Review 2 Project Summary Timeline: Start date: 10/1/2013 Planned end date: 9/30/2018 Key Milestones: 1. CGDB Releases (2); 3/31; 9/30/2015 2. Validated simulation methods for priority window attachments; 9/30/2015 Budget: Total DOE $ to date: $1,100k Total future DOE $: $2,100k [estimated] Key Partners: Project Goal: Develop validated simulation models and procedures for

  3. ORDER

    Energy Savers [EERE]

    PP&L EnergyPlus Company Order No. EA-210 I. BACKGROUND Exports of electricity from the United States to a foreign country are regulated and require authorization under section 202(e) of the Federal Power Act (FPA) (16 U.S.C. §824a(e)). On May 4, 1999, PP&L EnergyPlus Company (PP&L EnergyPlus) applied to the Office of Fossil Energy (FE) of the Department of Energy (DOE) for authorization to transmit electric energy to Canada as a power marketer. PP&L EnergyPlus, a limited

  4. Bonneville Power Administration Attachment P Oversupply Management...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    reduced generation in order to meet the Transmission Customers' schedules. The Oversupply Management Protocol will apply as follows: 1. The term of this attachment is March 31,...

  5. Attachment C1

    Office of Environmental Management (EM)

    - Summary GHG Emissions Data FINAL Attachment C - Summary GHG Emissions Data FINAL File Attachment C - Summary GHG Emissions Data FINAL More Documents & Publications Attachment C

    Summary GHG Emissions Data FINAL Attachment C Summary GHG Emissions Data FINAL File Attachment-C-Summary-GHG-Emissions-Data-FINAL.xlsx More Documents & Publications Attachment C -

    C1 WASTE CHARACTERIZATION TESTING METHODS Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 (This page

  6. Belt attachment and system

    DOE Patents [OSTI]

    Schneider, Abraham D.; Davidson, Erick M.

    2016-02-02

    Disclosed herein is a belt assembly including a flexible belt with an improved belt attachment. The belt attachment includes two crossbars spaced along the length of the belt. The crossbars retain bearings that allow predetermined movement in six degrees of freedom. The crossbars are connected by a rigid body that attaches to the bearings. Implements that are attached to the rigid body are simply supported but restrained in pitching rotation.

  7. Annual Report Outline (IDIQ Attachment J-10) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Report Outline (IDIQ Attachment J-10) Annual Report Outline (IDIQ Attachment J-10) Document offers an annual report outline sample for an energy savings performance contract. Microsoft Office document icon mv_annual_report.doc More Documents & Publications Post-Installation Report Outline (IDIQ Attachment J-9) Measurement and Verification Plan and Savings Calculations Methods Outline (IDIQ Attachment J-8) ESPC Task Order Financial Schedules (IDIQ Attachment J-6)

  8. Blade attachment assembly

    DOE Patents [OSTI]

    Garcia-Crespo, Andres Jose; Delvaux, John McConnell; Miller, Diane Patricia

    2016-05-03

    An assembly and method for affixing a turbomachine rotor blade to a rotor wheel are disclosed. In an embodiment, an adaptor member is provided disposed between the blade and the rotor wheel, the adaptor member including an adaptor attachment slot that is complementary to the blade attachment member, and an adaptor attachment member that is complementary to the rotor wheel attachment slot. A coverplate is provided, having a coverplate attachment member that is complementary to the rotor wheel attachment slot, and a hook for engaging the adaptor member. When assembled, the coverplate member matingly engages with the adaptor member, and retains the blade in the adaptor member, and the assembly in the rotor wheel.

  9. High Performance Window Attachments

    Energy Savers [EERE]

    High Performance Window Attachments D. Charlie Curcija Lawrence Berkeley National Laboratory dccurcija@lbl.gov 510-495-2602 April 4, 2013 2 | Building Technologies Office eere.energy.gov Purpose & Objectives Impact of Project: * Motivate manufacturers to make improvements in Window systems U-Factors, SHGC and daylighting utilization * Increase awareness of benefits from energy efficient window attachments Problem Statement: * A wide range of residential window attachments are available, but

  10. Attachment A1

    Office of Environmental Management (EM)

    A1 CONTAINER STORAGE Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT ATTACHMENT A1 Page A1-i ATTACHMENT A1 CONTAINER STORAGE TABLE OF CONTENTS Introduction ................................................................................................................................. 1 A1-1 Container Storage

  11. Attachment A2

    Office of Environmental Management (EM)

    A2 GEOLOGIC REPOSITORY Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT ATTACHMENT A2 Page A2-i ATTACHMENT A2 GEOLOGIC REPOSITORY TABLE OF CONTENTS A2-1 Description of the Geologic Repository ............................................................................ 1 A2-2 Geologic Repository Design and Process Description ..................................................... 2

  12. Attachment C4

    Office of Environmental Management (EM)

    C4 TRU MIXED WASTE CHARACTERIZATION USING ACCEPTABLE KNOWLEDGE Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 PERMIT ATTACHMENT C4 Page C4-i ATTACHMENT C4 TRU MIXED WASTE CHARACTERIZATION USING ACCEPTABLE KNOWLEDGE TABLE OF CONTENTS C4-1 Introduction ..................................................................................................................... 1 C4-2

  13. Attachment C6

    Office of Environmental Management (EM)

    C6 AUDIT AND SURVEILLANCE PROGRAM Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 PERMIT ATTACHMENT C6 Page C6-i ATTACHMENT C6 AUDIT AND SURVEILLANCE PROGRAM TABLE OF CONTENTS C6-1 Introduction ..................................................................................................................... 1 C6-2 Audit Procedures

  14. Attachment C7

    Office of Environmental Management (EM)

    C7 TRU WASTE CONFIRMATION Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 PERMIT ATTACHMENT C7 Page C7-i ATTACHMENT C7 TRU WASTE CONFIRMATION TABLE OF CONTENTS Introduction ................................................................................................................................. 1 C7-1 Permittee Confirmation of TRU Mixed Waste

  15. Attachment G3

    Office of Environmental Management (EM)

    G3 RADIOLOGICAL SURVEYS TO INDICATE POTENTIAL HAZARDOUS WASTE RELEASES Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT ATTACHMENT G3 Page G3-i ATTACHMENT G3 RADIOLOGICAL SURVEYS TO INDICATE POTENTIAL HAZARDOUS WASTE RELEASES TABLE OF CONTENTS G3-1 Purpose ........................................................................................................................... 1

  16. Attachment H1

    Office of Environmental Management (EM)

    H1 ACTIVE INSTITUTIONAL CONTROLS DURING POST-CLOSURE Waste Isolation Pilot Plant Hazardous Waste Permit November 1, 2012 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 1, 2012 PERMIT ATTACHMENT H1 Page H1-i ATTACHMENT H1 ACTIVE INSTITUTIONAL CONTROLS DURING POST-CLOSURE TABLE OF CONTENTS Introduction ................................................................................................................................. 1 H1.1 Active

  17. Descriptions of ESPC Task Order Schedules and Placement of Pricing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Pricing Information (IDIQ Attachment J-5) Descriptions of ESPC Task Order Schedules and Placement of Pricing Information (IDIQ Attachment J-5) Document provides task order ...

  18. AL2000-10Attach.pdf | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AL2000-10Attach.pdf AL2000-10Attach.pdf PDF icon AL2000-10Attach.pdf More Documents & Publications AL2000-10R.pdf AL2004-01r2.pdf Consent Order, Fluor Federal Services - EA-2000-10...

  19. Standard Financing Offer Template (IDIQ Attachment J-12) | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Standard Financing Offer Template (IDIQ Attachment J-12) Standard Financing Offer Template (IDIQ Attachment J-12) Document features a template to help communicate a finance offer as part of an energy savings performance contract. Microsoft Office document icon sfo.doc More Documents & Publications Investor Deal Summary Template (IDIQ Attachment J-11) ESPC Task Order Financial Schedules (IDIQ Attachment J-6) Review of ESPC Financing

  20. Attachment C3

    Office of Environmental Management (EM)

    C3 QUALITY ASSURANCE OBJECTIVES AND DATA VALIDATION TECHNIQUES FOR WASTE CHARACTERIZATION METHODS Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 PERMIT ATTACHMENT C3 Page C3-i ATTACHMENT C3 QUALITY ASSURANCE OBJECTIVES AND DATA VALIDATION TECHNIQUES FOR WASTE CHARACTERIZATION METHODS TABLE OF CONTENTS C3-1 Validation Methods

  1. Attachment C5

    Office of Environmental Management (EM)

    C5 QUALITY ASSURANCE PROJECT PLAN REQUIREMENTS Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 PERMIT ATTACHMENT C5 Page C5-i ATTACHMENT C5 QUALITY ASSURANCE PROJECT PLAN REQUIREMENTS TABLE OF CONTENTS C5-1 Quality Assurance Project Plans ...................................................................................... 1 C5-2 Document Review, Approval, and Control

  2. Attachment F2

    Office of Environmental Management (EM)

    F2 TRAINING COURSE AND QUALIFICATION CARD OUTLINES Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT ATTACHMENT F2 Page F2-i ATTACHMENT F2 TRAINING COURSE AND QUALIFICATION CARD OUTLINES TABLE OF CONTENTS Course Outlines .......................................................................................................................... 1 GET-19X/GET-20X/GET-21X - General

  3. Attachment G2

    Office of Environmental Management (EM)

    G2 WASTE ISOLATION PILOT PLANT SHAFT SEALING SYSTEM COMPLIANCE SUBMITTAL DESIGN REPORT Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT ATTACHMENT G2 Page G2-i ATTACHMENT G2 WASTE ISOLATION PILOT PLANT SHAFT SEALING SYSTEM COMPLIANCE SUBMITTAL DESIGN REPORT ADAPTED FROM: SAND96-1326/1 DISTRIBUTION UNLIMITED RELEASE CATEGORY UC-721 PRINTED AUGUST 1996 WASTE ISOLATION PILOT PLANT

  4. Attachment N1

    Office of Environmental Management (EM)

    N1 HYDROGEN AND METHANE MONITORING PLAN Waste Isolation Pilot Plant Hazardous Waste Permit January 31, 2012 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit January 31, 2012 PERMIT ATTACHMENT N1 Page N1-i ATTACHMENT N1 HYDROGEN AND METHANE MONITORING PLAN TABLE OF CONTENTS N1-1 Introduction ..................................................................................................................... 1 N1-2 Parameters to be Analyzed and Monitoring Design

  5. Attachment 3 of 5

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Department of Energy 1: Green Lease Policies and Procedures for Lease Acquisition Attachment 1: Green Lease Policies and Procedures for Lease Acquisition PDF icon Green Lease Policies and Procedures for Lease Acquisition More Documents & Publications Green Lease Policies and Procedures for Lease Acquisition Attachment 2: Solicitation for Offers with New and Revised Green Lease Text Energy Efficiency in Separate Tenant Spaces - A Feasibility Study | Department of Energy

    2:

  6. Micromechanical die attachment surcharge

    DOE Patents [OSTI]

    Filter, William F.; Hohimer, John P.

    2002-01-01

    An attachment structure is disclosed for attaching a die to a supporting substrate without the use of adhesives or solder. The attachment structure, which can be formed by micromachining, functions purely mechanically in utilizing a plurality of shaped pillars (e.g. round, square or polygonal and solid, hollow or slotted) that are formed on one of the die or supporting substrate and which can be urged into contact with various types of mating structures including other pillars, a deformable layer or a plurality of receptacles that are formed on the other of the die or supporting substrate, thereby forming a friction bond that holds the die to the supporting substrate. The attachment structure can further include an alignment structure for precise positioning of the die and supporting substrate to facilitate mounting the die to the supporting substrate. The attachment structure has applications for mounting semiconductor die containing a microelectromechanical (MEM) device, a microsensor or an integrated circuit (IC), and can be used to form a multichip module. The attachment structure is particularly useful for mounting die containing released MEM devices since these devices are fragile and can otherwise be damaged or degraded by adhesive or solder mounting.

  7. Ceramic blade attachment system

    DOE Patents [OSTI]

    Boyd, G.L.

    1994-12-13

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine wheel having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine blade has a root portion having a pair of recessed portions thereon. The turbine wheel includes a plurality of openings in which the turbine blade is positioned. Each of the openings have a pair of grooves therein in which are positioned a pair of pins having a generally rectangular cross-section and a reaction surface thereon. A pair of cylindrical rollers interposed respective ones of the pair of reaction surfaces and the pair of recessed portions. The attachment system or turbine assembly provides an economical, reliable and effective attachment of a component having a preestablished rate of thermal expansion to a component having a greater preestablished rate of thermal expansion. 3 figures.

  8. Ceramic blade attachment system

    DOE Patents [OSTI]

    Boyd, Gary L. (Alpine, CA)

    1994-01-01

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine wheel having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine blade has a root portion having a pair of recessed portions thereon. The turbine wheel includes a plurality of openings in which the turbine blade is positioned. Each of the openings have a pair of grooves therein in which are positioned a pair of pins having a generally rectangular cross-section and a reaction surface thereon. A pair of cylindrical rollers interposed respective ones of the pair of reaction surfaces and the pair of recessed portions. The attachment system or turbine assembly provides an economical, reliable and effective attachment of a component having a preestablished rate of thermal expansion to a component having a greater preestablished rate of thermal expansion.

  9. Internal pipe attachment mechanism

    DOE Patents [OSTI]

    Bast, Richard M. (Livermore, CA); Chesnut, Dwayne A. (Pleasanton, CA); Henning, Carl D. (Livermore, CA); Lennon, Joseph P. (Livermore, CA); Pastrnak, John W. (Livermore, CA); Smith, Joseph A. (Livermore, CA)

    1994-01-01

    An attachment mechanism for repairing or extending fluid carrying pipes, casings, conduits, etc. utilizing one-way motion of spring tempered fingers to provide a mechanical connection between the attachment mechanism and the pipe. The spring tempered fingers flex to permit insertion into a pipe to a desired insertion depth. The mechanical connection is accomplished by reversing the insertion motion and the mechanical leverage in the fingers forces them outwardly against the inner wall of the pipe. A seal is generated by crushing a sealing assembly by the action of setting the mechanical connection.

  10. Internal pipe attachment mechanism

    DOE Patents [OSTI]

    Bast, R.M.; Chesnut, D.A.; Henning, C.D.; Lennon, J.P.; Pastrnak, J.W.; Smith, J.A.

    1994-12-13

    An attachment mechanism is described for repairing or extending fluid carrying pipes, casings, conduits, etc. utilizing one-way motion of spring tempered fingers to provide a mechanical connection between the attachment mechanism and the pipe. The spring tempered fingers flex to permit insertion into a pipe to a desired insertion depth. The mechanical connection is accomplished by reversing the insertion motion and the mechanical leverage in the fingers forces them outwardly against the inner wall of the pipe. A seal is generated by crushing a sealing assembly by the action of setting the mechanical connection. 6 figures.

  11. Magnetically attached sputter targets

    DOE Patents [OSTI]

    Makowiecki, D.M.; McKernan, M.A.

    1994-02-15

    An improved method and assembly for attaching sputtering targets to cathode assemblies of sputtering systems which includes a magnetically permeable material is described. The magnetically permeable material is imbedded in a target base that is brazed, welded, or soldered to the sputter target, or is mechanically retained in the target material. Target attachment to the cathode is achieved by virtue of the permanent magnets and/or the pole pieces in the cathode assembly that create magnetic flux lines adjacent to the backing plate, which strongly attract the magnetically permeable material in the target assembly. 11 figures.

  12. Ladder attachment platform

    DOE Patents [OSTI]

    Swygert,; Richard, W [Springfield, SC

    2012-08-28

    A ladder attachment platform is provided that includes a base for attachment to a ladder that has first and second side rails and a plurality of rungs that extend between in a lateral direction. Also included is a user platform for having a user stand thereon that is carried by the base. The user platform may be positioned with respect to the ladder so that it is not located between a first plane that extends through the first side rail and is perpendicular to the lateral direction and a second plane that extends through the second side rail and is perpendicular to the lateral direction.

  13. Turbine nozzle attachment system

    DOE Patents [OSTI]

    Norton, Paul F.; Shaffer, James E.

    1995-01-01

    A nozzle guide vane assembly having a preestablished rate of thermal expansion is positioned in a gas turbine engine and being attached to conventional metallic components. The nozzle guide vane assembly includes a pair of legs extending radially outwardly from an outer shroud and a pair of mounting legs extending radially inwardly from an inner shroud. Each of the pair of legs and mounting legs have a pair of holes therein. A plurality of members attached to the gas turbine engine have a plurality of bores therein which axially align with corresponding ones of the pair of holes in the legs. A plurality of pins are positioned within the corresponding holes and bores radially positioning the nozzle guide vane assembly about a central axis of the gas turbine engine.

  14. Turbine nozzle attachment system

    DOE Patents [OSTI]

    Norton, P.F.; Shaffer, J.E.

    1995-10-24

    A nozzle guide vane assembly having a preestablished rate of thermal expansion is positioned in a gas turbine engine and is attached to conventional metallic components. The nozzle guide vane assembly includes a pair of legs extending radially outwardly from an outer shroud and a pair of mounting legs extending radially inwardly from an inner shroud. Each of the pair of legs and mounting legs have a pair of holes therein. A plurality of members attached to the gas turbine engine have a plurality of bores therein which axially align with corresponding ones of the pair of holes in the legs. A plurality of pins are positioned within the corresponding holes and bores radially positioning the nozzle guide vane assembly about a central axis of the gas turbine engine. 3 figs.

  15. Investor Deal Summary Template (IDIQ Attachment J-11) | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Investor Deal Summary Template (IDIQ Attachment J-11) Investor Deal Summary Template (IDIQ Attachment J-11) Document features a template for summarizing an investor or energy service company's deal as part of an energy savings performance contract. Microsoft Office document icon Download the Investor Deal Summary Template. More Documents & Publications ESPC Task Order Financial Schedules (IDIQ Attachment J-6) ESPC ENABLE Final Proposal Requirements Model Energy Savings Performance

  16. Attachment F- Bibliography and References

    Broader source: Energy.gov [DOE]

    These documents are listed in Attachment F - Bibliography and References section of the Phase 2 Radiological Release Accident Investigation Report.

  17. Post-Installation Report Outline (IDIQ Attachment J-9) | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Installation Report Outline (IDIQ Attachment J-9) Post-Installation Report Outline (IDIQ Attachment J-9) Document offers a post-installation report outline sample for an energy savings performance contract. Microsoft Office document icon mv_post_report.doc More Documents & Publications Measurement and Verification Plan and Savings Calculations Methods Outline (IDIQ Attachment J-8) Annual Report Outline (IDIQ Attachment J-10) ESPC Task Order Financial Schedules (IDIQ Attachment

  18. Ceramic blade attachment system

    DOE Patents [OSTI]

    Frey, deceased, Gary A. (late of Poway, CA); Jimenez, Oscar D. (Escondia, CA)

    1996-01-01

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine flange having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine flange includes a first upstanding flange and a second upstanding flange having a groove formed therebetween. The turbine flange further includes a recess. Each of the first and second upstanding flanges have a plurality of bores therein. A turbine blade has a first member and a second member positioned in one of the groove and the recess. Each of the first member and the second member have a plurality of bores therein. And, a pin is positioned in respective ones of the plurality of bores in the first and second upstanding members and the first and second members and attach the blade to the turbine flange. The pin has a preestablished rate of thermal expansion being substantially equal to the rate of thermal expansion of the blade.

  19. Ceramic blade attachment system

    DOE Patents [OSTI]

    Frey, G.A.; Jimenez, O.D.

    1996-12-03

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine flange having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine flange includes a first upstanding flange and a second upstanding flange having a groove formed between them. The turbine flange further includes a recess. Each of the first and second upstanding flanges have a plurality of bores therein. A turbine blade has a first member and a second member positioned in one of the groove and the recess. Each of the first member and the second member have a plurality of bores therein. A pin is positioned in respective ones of the plurality of bores in the first and second upstanding members and the first and second members and attach the blade to the turbine flange. The pin has a preestablished rate of thermal expansion being substantially equal to the rate of thermal expansion of the blade. 4 figs.

  20. Appendix TFIELD Attachment A: Attachment A: TFIELD-2014 Visualization

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Attachment A: TFIELD-2014 Visualization United States Department of Energy Waste Isolation Pilot Plant Carlsbad Field Office Carlsbad, New Mexico Compliance Recertification Application 2014 Attachment A: TFIELD-2014 Visualization This attachment contains figures for Appendix TFIELD-2014, related to the Culebra T-Field calibration process, performed as part of the 2009 Compliance Recertification Application (CRA-2009) Performance Assessment Baseline Calculation (PABC). These parameter inputs and

  1. Ceramic blade attachment system

    DOE Patents [OSTI]

    Shaffer, J.E.

    1995-01-10

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine wheel having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine blade has a root portion having a first groove and a second groove therein. The turbine wheel includes a plurality of openings in which the turbine blade is positioned. Each of the openings has a first groove and a second groove therein. The space or void formed between the first grooves and the second grooves has a plurality of spherical balls positioned therein. The plurality of spherical balls has a preestablished rate of thermal expansion being equal to the preestablished rate of thermal expansion of the turbine blade. 4 figures.

  2. Ceramic blade attachment system

    DOE Patents [OSTI]

    Shaffer, James E. (Maitland, FL)

    1995-01-01

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine wheel having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine blade has a root portion having a first groove and a second groove therein. The turbine wheel includes a plurality of openings in which the turbine blade is positioned. Each of the openings has a first groove and a second groove therein. The space or void formed between the first grooves and the second grooves has a plurality of spherical balls positioned therein. The plurality of spherical balls has a preestablished rate of thermal expansion being equal to the preestablished rate of thermal expansion of the turbine blade.

  3. Ceramic blade attachment system

    DOE Patents [OSTI]

    Shaffer, James E. (Maitland, FL)

    1995-01-01

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine disc having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade and forms a turbine assembly. The turbine blade has a root portion defining a pair of sides having a pair of grooves therein. The turbine assembly includes a pair of flanges between which the turbine blades are positioned. Each of the pair of flanges has a plurality of grooves defined therein. The grooves within the pair of flanges are aligned with the grooves in the blades and have a space formed therebetween. A plurality of spherical balls are positioned within the space. The plurality of spherical balls has a preestablished rate of thermal expansion being equal to the preestablished rate of thermal expansion of the turbine blade.

  4. Ceramic blade attachment system

    DOE Patents [OSTI]

    Shaffer, J.E.

    1995-07-11

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine disc having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade and forms a turbine assembly. The turbine blade has a root portion defining a pair of sides having a pair of grooves therein. The turbine assembly includes a pair of flanges between which the turbine blades are positioned. Each of the pair of flanges has a plurality of grooves defined therein. The grooves within the pair of flanges are aligned with the grooves in the blades and have a space formed therebetween. A plurality of spherical balls are positioned within the space. The plurality of spherical balls has a preestablished rate of thermal expansion being equal to the preestablished rate of thermal expansion of the turbine blade. 4 figs.

  5. Attachment 3 of 5

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 of 6. January 17, 2002 Change Number M-90-01-03 Draft Federal Facility Agreement and Consent Order Change Control Form Do not use blue ink. Type or print using black ink. Date January 17, 2002 Originator DOE-Office of River Protection Phone Class of Change [ ] I - Signatories [X] II - Executive Manager [ ] III - Project Manager Change Title Modification of Hanford Federal Facility Agreement and Consent Order (HFFACO) M90 series requirements in order to resolve inconsistencies between HFFACO

  6. Attachment 6 - Government Property List

    National Nuclear Security Administration (NNSA)

    2 EQUIPMENT - HANDHELD COMPUTER - WIRELESS WHEEL LOAD SYSTEM 1 EQUIPMENT - HEAT STRESS MONITOR 5 EQUIPMENT - HOIST - PORTABLE 1 November 20, 2013 DE-SOL-0005982 Attachment 6...

  7. Attachment A -- Deliverables.xls

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4: Unrevised SFO Paragraphs Reissued Attachment 4: Unrevised SFO Paragraphs Reissued PDF icon Unrevised SFO Paragraphs Reissued More Documents & Publications Attachment 2: Solicitation for Offers with New and Revised Green Lease Text Attachment 1: Green Lease Policies and Procedures for Lease Acquisition 1

    B - J Deliverables Attachment A TOC Deliverables DE-AC27-08RV14800 SEC. Contract Section Description Action Timing TFP CO ESQ OPA IR/HR ORP MGR DCAA B B.2 Modify contract to obligate

  8. RFP Section L Attachment Templates

    Broader source: Energy.gov [DOE]

    On March 29,2010, six draft RFP Section L Attachment templates (Past Performance Information Questionnaire, Past Performance Questionnaire Cover Letter, Letter of Commitment, Past Performance Reference Information Form, ESH&Q Past Performance Information Form, and Resume Format) were distributed for Procurement Director (PD) and Head of Contracting Activity (HCA) review and comment. All comments received were considered and changes were made as appropriate. The final versions of the six aforementioned RFP Section L Attachment templates will be e-mailed directly to the Procurement Directors and made available in the STRIPES Library. For RFP's generated in STRIPES, the Section L Attachments should be identified in clause DOE-L-1033 and the file with each Attachment should be attached to the RFP.

  9. ESPC Task Order Financial Schedules (IDIQ Attachment J-6)

    Broader source: Energy.gov [DOE]

    Document features worksheets federal agencies can use to determine guaranteed cost savings and contractor payments, energy conservation measure costs and savings, and more in an for an energy savings performance contract (ESPC).

  10. Attachment C: Optional AIP Provisions

    Broader source: Energy.gov [DOE]

    This attachment contains sample language for a number of optional provisions that sites may choose to include or not to include in their AIPs. Optional AIP provisions are not mandatory and the...

  11. Attachment 1 - Performance Work Statement

    National Nuclear Security Administration (NNSA)

    including TTR. Waste acceptance services will be performed at the NNSS and at waste generator sites. DE-SOL-0005982 Attachment 1 Page 1 2. Scope of Work 2.1 Requirement: The EPS...

  12. Monthly Progress Report for Corrective Actions Prescribed in Attachment A of the

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Progress Report for Corrective Actions Prescribed in Attachment A of the Settlement Agreement and Stipulated Final Order, Dated January 22, 2016, NO. HWB-14-21 (CO) Paragraph 31 of the Settlement Agreement and Stipulated Final Order (Settlement Agreement) states: The WIPP corrective actions and corrective action schedules are included as Attachment A. The Respondents shall keep NMED apprised of progress made on corrective actions found in Attachment A on a monthly basis. The Respondents shall

  13. ATTACHMENT

    Broader source: Energy.gov (indexed) [DOE]

    Pages. Under Estimated Total Size, you will see the original file size and the 3. Click OK to accept the file size compression. compressed file size. U.S. Department of Energy,...

  14. ch26attachment.pdf | Department of Energy

    Energy Savers [EERE]

    ch26attachment.pdf ch26attachment.pdf PDF icon ch26attachment.pdf More Documents & Publications FAL2003-03Attachment.pdf Sources for Office Supplies AL2000-10Attach.pdf

  15. Attachment L-1 - Entity Certificates

    National Nuclear Security Administration (NNSA)

    3] Attachment L-1 1 ENTITY CERTIFICATE The offeror shall submit evidence to substantiate the authority of the person signing the offer and submit in Volume I of the proposal. CERTIFICATE I, _______________________________________________, certify that I have the signatory authority as the _________________________________________ to sign this offer/contract on behalf of said entity and to bind the entity by the authority of its governing body and within the scope of its powers. Affix the

  16. Energy Savings from Window Attachments

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    from Window Attachments October 2013 Prepared for: Building Technologies Office Office of Energy Efficiency and Renewable Energy U.S. Department of Energy Prepared by: Lawrence Berkeley National Laboratory October 2013 Prepared for: Building Technologies Office Office of Energy Efficiency and Renewable Energy U.S. Department of Energy Prepared By: Lawrence Berkeley National Laboratory One Cyclotron Road, MS 90R3111 Berkeley, CA 94720 Authors: D. Charlie Curcija Mehry Yazdanian Christian Kohler

  17. ATTACHMENT F PAST PERFORMANCE QUESTIONNAIRE

    National Nuclear Security Administration (NNSA)

    SOURCE SELECTION INFORMATION - SEE FAR 3.104 (When Filled-In) 1 ATTACHMENT F PAST PERFORMANCE QUESTIONNAIRE Offerors are responsible for sending copies of the PAST PERFORMANCE QUESTIONNAIRE (SECTIONs A thru C) to references. Instructions to Offeror 1. For each reference submitted in your proposal, enter the required information in Section A. 2. Transmit the entire questionnaire to the identified Points of Contract (POCs) and place one copy of each Section A in your proposal submittal. NOTES:

  18. Attachment D: Mandatory Provisions if Applicable

    Broader source: Energy.gov [DOE]

    This attachment contains provisions that may be mandatory for an AIP if the State: (1) chooses to develop an emergency response program but does not want to use the suggested language in Attachment...

  19. Microsoft Word - Attachment J.doc

    Office of Environmental Management (EM)

    Waste Isolation Pilot Plant Hazardous Waste Permit April 15, 2011 PERMIT ATTACHMENT J Page J-i ATTACHMENT J HAZARDOUS WASTE MANAGEMENT UNIT TABLES LIST OF TABLES Table Title...

  20. Microsoft Word - Attachment I.doc

    Office of Environmental Management (EM)

    SCHEDULE RESERVED Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT I Page I-i ATTACHMENT I COMPLIANCE SCHEDULE RESERVED

  1. Microsoft Word - Attachment M.doc

    Office of Environmental Management (EM)

    M FIGURES RESERVED Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT M Page M-i ATTACHMENT M FIGURES RESERVED

  2. Attachment C … Waste Analysis Plan

    Office of Environmental Management (EM)

    Configurations | Department of Energy Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations Docket No. EO-05-01: Attachment to the Operating Plan of Mirant Potomac River, LLC PDF icon Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations More Documents & Publications Mirant Potomac, Alexandria, Virginia: Maximum Impacts Predicted by AERMOD-PRIME Mirant

  3. Attachments Energy Ratings Council | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attachments Energy Ratings Council Attachments Energy Ratings Council Attachments Energy Ratings Council Lead Performer: Window Covering Manufacturing Association - New York, NY DOE Funding: $1,600,000 Project Term: October 1, 2014 - September 30, 2018 Funding Opportunity Announcement: Certification and Rating Attachments for Fenestration Technologies DE-FOA-001000-1504 Project Objective This project is to develop an independent rating, certification, labeling, and performance verification

  4. Split ring containment attachment device

    DOE Patents [OSTI]

    Sammel, Alfred G.

    1996-01-01

    A containment attachment device 10 for operatively connecting a glovebag 200 to plastic sheeting 100 covering hazardous material. The device 10 includes an inner split ring member 20 connected on one end 22 to a middle ring member 30 wherein the free end 21 of the split ring member 20 is inserted through a slit 101 in the plastic sheeting 100 to captively engage a generally circular portion of the plastic sheeting 100. A collar potion 41 having an outer ring portion 42 is provided with fastening means 51 for securing the device 10 together wherein the glovebag 200 is operatively connected to the collar portion 41.

  5. ATTACHMENT J.1 - APPENDIX A

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    36 Contract No. DE-AC02-09CH11466 Section J - Appendix A J-A-1 ATTACHMENT J.1 APPENDIX A ADVANCED UNDERSTANDINGS ON HUMAN RESOURCES Applicable to the Operation of Princeton Plasma Physics Laboratory Contract No. DE-AC02-09CH11466 Modification No. 0136 Contract No. DE-AC02-09CH11466 Section J - Appendix A J-A-2 Table of Contents Appendix A PRINCETON PLASMA PHYSICS LABORATORY ADVANCE UNDERSTANDING ON HUMAN RESOURCES I. INTRODUCTION II. HUMAN RESOURCES STRATEGY, BUSINESS PLANNING AND PERFORMANCE

  6. ATTACHMENT J.7 - APPENDIX G

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Modification No. 0199 Contract No. DE-AC02-09CH11466 Section J - Appendix G J-G-1 ATTACHMENT J.7 APPENDIX G PURCHASING SYSTEM REQUIREMENTS Applicable to the Operation of PPPL Contract No. DE-AC02-09CH11466 Modification No. 0199 Contract No. DE-AC02-09CH11466 Section J - Appendix G J-G-2 Appendix G Purchasing System Requirements This Appendix and Clause I.146 "Contractor Purchasing System," sets forth DOE requirements applicable to the Purchasing System established under the Contract

  7. DNA attachment to support structures

    DOE Patents [OSTI]

    Balhorn, Rodney L.; Barry, Christopher H.

    2002-01-01

    Microscopic beads or other structures are attached to nucleic acids (DNA) using a terminal transferase. The transferase adds labeled dideoxy nucleotide bases to the ends of linear strands of DNA. The labels, such as the antigens digoxigenin and biotin, bind to the antibody compounds or other appropriate complementary ligands, which are bound to the microscopic beads or other support structures. The method does not require the synthesis of a synthetic oligonucleotide probe. The method can be used to tag or label DNA even when the DNA has an unknown sequence, has blunt ends, or is a very large fragment (e.g., >500 kilobase pairs).

  8. Attachment A -- Deliverables.xls

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    I Deliverables Attachment A TOC Deliverables DE-AC27-08RV14800 SEC. FAR/DEAR Clause Reference Description Action Timing TFP CO ESQ OPA IR/HR ORP MGR DCAA I.2 FAR 52.202-1 Definitions (JUL 2004) as supplemented by DEAR 952.202-1 (Mar 2002) Verify compliance As Required L I.3 FAR 52.203-3 Gratuities (APR 1984) Verify compliance As Required L I.4 FAR 52.203-5 Covenant Against Contingent Fees (APR 1984) Verify compliance As Required L I.5 FAR 52.203-6 Restrictions on Subcontractor Sales to the

  9. Methane production by attached film

    DOE Patents [OSTI]

    Jewell, William J.

    1981-01-01

    A method for purifying wastewater of biodegradable organics by converting the organics to methane and carbon dioxide gases is disclosed, characterized by the use of an anaerobic attached film expanded bed reactor for the reaction process. Dilute organic waste material is initially seeded with a heterogeneous anaerobic bacteria population including a methane-producing bacteria. The seeded organic waste material is introduced into the bottom of the expanded bed reactor which includes a particulate support media coated with a polysaccharide film. A low-velocity upward flow of the organic waste material is established through the bed during which the attached bacterial film reacts with the organic material to produce methane and carbon dioxide gases, purified water, and a small amount of residual effluent material. The residual effluent material is filtered by the film as it flows upwardly through the reactor bed. In a preferred embodiment, partially treated effluent material is recycled from the top of the bed to the bottom of the bed for further treatment. The methane and carbon dioxide gases are then separated from the residual effluent material and purified water.

  10. Attachment FY2011-75 OPAM | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    OPAM Attachment FY2011-75 OPAM Federal Supply Schedules Attachment FY2011-75 OPAM More Documents & Publications Chapter 8 - Required Sources of Supplies and Services Attachment...

  11. Attachment C - Summary GHG Emissions Data FINAL | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    - Summary GHG Emissions Data FINAL Attachment C - Summary GHG Emissions Data FINAL File Attachment C - Summary GHG Emissions Data FINAL More Documents & Publications Attachment C

  12. Attachment C Summary GHG Emissions Data FINAL | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Summary GHG Emissions Data FINAL Attachment C Summary GHG Emissions Data FINAL File Attachment-C-Summary-GHG-Emissions-Data-FINAL.xlsx More Documents & Publications Attachment C -

  13. Microsoft Word - Policy Flash 2010-77 Attachment | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7 Attachment Microsoft Word - Policy Flash 2010-77 Attachment Microsoft Word - Policy Flash 2010-77 Attachment More Documents & Publications Microsoft Word - Policy Flash 2010-78...

  14. Microsoft Word - Attachment 3 Recovery Act notification | Department...

    Energy Savers [EERE]

    Microsoft Word - Attachment 3 Recovery Act notification Microsoft Word - Attachment 3 Recovery Act notification More Documents & Publications Microsoft Word - Attachment 3 Recovery...

  15. Microsoft Word - Policy Flash 2010-81 Attachment 1 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1 Attachment 1 Microsoft Word - Policy Flash 2010-81 Attachment 1 Microsoft Word - Policy Flash 2010-81 Attachment 1 More Documents & Publications Microsoft Word - Policy Flash...

  16. Attached is Policy Flash 2013-44 Acquisition Guide- Allowability...

    Energy Savers [EERE]

    Attached is Policy Flash 2013-44 Acquisition Guide- Allowability of Incurred Costs Attached is Policy Flash 2013-44 Acquisition Guide- Allowability of Incurred Costs Attached is...

  17. FERC Order No. 792 - Interconnection Request | Open Energy Information

    Open Energy Info (EERE)

    792 - Interconnection RequestLegal Abstract FERC Order No. 792, Attachment 2, Small Generator Interconnection Request Form, current through June 3, 2014. Published NA Year...

  18. ATTACHMENT J.3 - APPENDIX C

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    99 Contract No.: DE-AC02-09CH11466 Section J - Appendix C J-C-1 ATTACHMENT J.3 APPENDIX C SPECIAL FINANCIAL INSTITUTION ACCOUNT AGREEMENT Applicable to the Operation of PPPL Contract No. DE-AC02-09CH11466 Modification No. 0199 Contract No.: DE-AC02-09CH11466 Section J - Appendix C J-C-2 Modification N o: 0 199 Contract N o: D E---AC02---09CH11466 Section J --- A ppendix C Information c ontained i n t his d ocument i s r estricted. C ontact P PPL v ia e mail--- j delooper@pppl.gov t o r equest a

  19. AttachmentFlash_2010-55.pdf | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AttachmentFlash2010-55.pdf More Documents & Publications AttachmentFlash2010-66.pdf AttachmentFlash2010-73(3).pdf AttachmentFlash2010-33(2).pdf...

  20. FAL2003-03Attachment.pdf | Department of Energy

    Energy Savers [EERE]

    3-03Attachment.pdf FAL2003-03Attachment.pdf PDF icon FAL2003-03Attachment.pdf More Documents & Publications FAL2003-03.pdf ch26attachment.pdf AL2003

  1. Microsoft Word - Attachment J-4 Legal Management Plan.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4-1 ATTACHMENT J.4. LEGAL MANAGEMENT

  2. al99-06attachment.doc | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    attachment.doc&0; al99-06attachment.doc&0; PDF icon al99-06attachment.doc&0; More Documents & Publications Microsoft Word - AL2000-05Attachment.doc Microsoft Word - NSRC...

  3. Building America Expert Meeting: Cladding Attachment Over Exterior...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Expert Meeting: Cladding Attachment Over Exterior Insulation Building America Expert Meeting: Cladding Attachment Over Exterior Insulation Building Science...

  4. Introducing the Attachments Energy Ratings Council

    Broader source: Energy.gov [DOE]

    In collaboration with the U.S. Department of Energy (DOE), the Window Covering Manufacturers Association (WCMA) has launched the Attachments Energy Ratings Council (AERC).

  5. DE-SOL-0008445 Attachment L-4

    National Nuclear Security Administration (NNSA)

    DE-SOL-0008445 Attachment L-4 Page 1 of 4 PAST PERFORMANCE QUESTIONNAIRE The Department of Energy (DOE), National Nuclear Security Administration (NNSA) is interested in your...

  6. SECTION L … ATTACHMENT A - PERFORMANCE GUARANTEE AGREEMENT

    National Nuclear Security Administration (NNSA)

    A, Page 1 SECTION L ATTACHMENT A PERFORMANCE GUARANTEE AGREEMENT For value received, and in consideration of, and in order to induce the United States (the Government) to enter into Contract [insert Contract number] for the management and operation of the Nevada National Security Site (the "Contract") dated _______________, by and between the Government and _______________ (Contractor), the undersigned, ____________________ _______________ (Guarantor), a corporation incorporated in the

  7. Microsoft Word - Attachment 1 DICCE2 Statement of Work

    National Nuclear Security Administration (NNSA)

    Attachment 1 DE-SOL-0008449 1. OBJECTIVE The objective of this procurement is to install integrated sustainable radiation detection equipment at selected international land border crossings, airports, feeder ports and seaports in cooperation with international partners around the world in order to strengthen the overall capability of partner countries to deter, detect, and interdict illicit trafficking in special nuclear and other radiological materials. The focus is on the integration

  8. High Performance Window Attachments | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    High Performance Window Attachments High Performance Window Attachments Emerging Technologies Project for the 2013 Building Technologies Office's Program Peer Review PDF icon emrgtech20_curcija_040413.pdf More Documents & Publications Fenestration Software Tools Advanced Facades, Daylighting, and Complex Fenestration Systems OpenStudio - 2013 Peer Review

  9. Microsoft Word - Attachment F1.doc

    Office of Environmental Management (EM)

    F1 RCRA HAZARDOUS WASTE MANAGEMENT JOB TITLES AND DESCRIPTIONS Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT F1 Page F1-i ATTACHMENT F1 RCRA HAZARDOUS WASTE MANAGEMENT JOB TITLES AND DESCRIPTIONS TABLE OF CONTENTS Job

  10. Microsoft Word - Attachment H.doc

    Office of Environmental Management (EM)

    H POST-CLOSURE PLAN Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT H Page H-i ATTACHMENT H POST-CLOSURE PLAN TABLE OF CONTENTS Introduction ................................................................................................................................... 1 H-1 Post-Closure Plan

  11. Nuclear reactor fuel rod attachment system

    DOE Patents [OSTI]

    Not Available

    1980-09-17

    A reusable system is described for removably attaching a nuclear reactor fuel rod to a support member. A locking cap is secured to the fuel rod and a locking strip is fastened to the support member. The locking cap has two opposing fingers shaped to form a socket having a body portion. The locking strip has an extension shaped to rigidly attach to the socket's body portion. The locking cap's fingers are resiliently deflectable. For attachment, the locking cap is longitudinally pushed onto the locking strip causing the extension to temporarily deflect open the fingers to engage the socket's body portion. For removal, the process is reversed.

  12. TASK ORDER

    National Nuclear Security Administration (NNSA)

    NA0000XXX Task Order No: DE-DT000XXXX Statement of Work August 7, 2015 Task Order Title: Design, Integration, Construction, Communications, and Engineering (DICCE) Services for Port of Cat Lai, Vietnam. Scope: The Contractor shall design, construct, and integrate fully functional portal monitor and communications systems at designated sites in Vietnam. * Port of Cat Lai Requirements Documents: The following task order requirements describe key milestones and deliverables. For a more complete

  13. Ordering Information

    Gasoline and Diesel Fuel Update (EIA)

    coal industry Natural gas trade (Table 4.3) Ordering Information This publication and other Energy Information Administration (EIA) publications may be purchased from the...

  14. River Corridor Closure Contract Section J, Attachment...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 Contract No. DE-AC06-05RL14655 A000 1 ATTACHMENT J-12 GOVERNMENT-FURNISHED SERVICES AND INFORMATION (GFSI) GFSI Item Scope Description GFSI Description C.4 Hanford Site...

  15. Microsoft Word - Attachment coversheet.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    HANFORD MISSION SUPPORT CONTRACT ADVANCE UNDERSTANDING ON COST REVISED DECEMBER 31, 2014 Mission Support Contract Contract Number DE-AC06-09RL14728 Attachment J, Section J.8...

  16. Appendix DATA Attachment A: WIPP Borehole Update

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Carlsbad Field Office Carlsbad, New Mexico Appendix DATA-2014 Attachment A: WIPP Borehole Update Table of Contents DATA-A-1.0 WIPP Boreholes DATA-A-2.0 Individual Well Reports ...

  17. EXHIBIT G7.0 Attachment 2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    G7.0 Attachment 2 32014 Page 1 SUBCONTRACTOR CYBER SECURITY PLAN Vendor Name (if Applicable): Subcontract No. PR- Ex. G dated: XXXXXX Rev. No.: 7 Pursuant to the requirements in...

  18. Attachment device for an inflatable protective cushion

    DOE Patents [OSTI]

    Nelsen, James M.; Luna, Daniel A.; Gwinn, Kenneth W.

    1997-01-01

    An inflatable cushion assembly for use with an inflator comprises an inflatable cushion having an inner surface, outer surface, and at least one protrusion extending from one of the inner or outer surfaces. The inflatable cushion defines an opening between the inner surface and the outer surface for receiving the inflator. An attachment member contacts the one of the inner or outer surfaces adjacent the opening and includes a groove for receiving the protrusion, the attachment member securing the inflator within the opening.

  19. Attachment device for an inflatable protective cushion

    DOE Patents [OSTI]

    Nelsen, James M.; Luna, Daniel A.; Gwinn, Kenneth W.

    1998-01-01

    An inflatable cushion assembly for use with an inflator comprises an inflatable cushion having an inner surface, outer surface, and at least one protrusion extending from one of the inner or outer surfaces. The inflatable cushion defines an opening between the inner surface and the outer surface for receiving the inflator. An attachment member contacts the one of the inner or outer surfaces adjacent the opening and includes a groove for receiving the protrusion, the attachment member securing the inflator within the opening.

  20. Microsoft Word - Attachment G1.doc

    Office of Environmental Management (EM)

    DETAILED DESIGN REPORT FOR AN OPERATION PHASE PANEL CLOSURE SYSTEM Adapted from DOE/WIPP 96-2150 Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT G1 Page G1-i ATTACHMENT G1 DETAILED DESIGN REPORT FOR AN OPERATION PHASE PANEL CLOSURE SYSTEM TABLE OF CONTENTS Executive Summary

  1. Microsoft Word - Attachment J.doc

    Office of Environmental Management (EM)

    UNIT TABLES Waste Isolation Pilot Plant Hazardous Waste Permit April 15, 2011 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit April 15, 2011 PERMIT ATTACHMENT J Page J-i ATTACHMENT J HAZARDOUS WASTE MANAGEMENT UNIT TABLES LIST OF TABLES Table Title Table J-1 Waste Handling Building (WHB) Container Storage Unit Table J-2 Parking Area Container Storage Unit Table J-3 Underground Hazardous Waste Disposal Units Waste Isolation Pilot Plant Hazardous Waste Permit

  2. ATTACHMENT A - CHECKLIST FOR SELF ASSESSMENT | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ATTACHMENT A - CHECKLIST FOR SELF ASSESSMENT ATTACHMENT A - CHECKLIST FOR SELF ASSESSMENT PDF icon ATTACHMENT A - CHECKLIST FOR SELF ASSESSMENT More Documents & Publications Assessment B - Program Criteria Assessment C-Site Visit Protocol Records Management Handbook

  3. Attachment FY2011-83 OPAM | Department of Energy

    Office of Environmental Management (EM)

    3 OPAM Attachment FY2011-83 OPAM Federal Supply Schedules Attachment FY2011-83 OPAM More Documents & Publications Chapter 8 - Required Sources of Supplies and Services Attachment...

  4. Microsoft Word - Policy Flash 2010-81 Attachment 2 | Department...

    Office of Environmental Management (EM)

    81 Attachment 2 Microsoft Word - Policy Flash 2010-81 Attachment 2 Microsoft Word - Policy Flash 2010-81 Attachment 2 More Documents & Publications ATTACHMENTFLASH2010.81(2)-OPAM...

  5. Microsoft Word - Policy Flash 2011-2 Attachment 1 | Department...

    Energy Savers [EERE]

    Microsoft Word - Policy Flash 2011-2 Attachment 1 Microsoft Word - Policy Flash 2011-2 Attachment 1 Microsoft Word - Policy Flash 2011-2 Attachment 1 More Documents & Publications...

  6. Microsoft Word - Policy Flash 2010-81 Attachment 1 | Department...

    Energy Savers [EERE]

    Microsoft Word - Policy Flash 2010-81 Attachment 1 Microsoft Word - Policy Flash 2010-81 Attachment 1 Microsoft Word - Policy Flash 2010-81 Attachment 1 More Documents &...

  7. Microsoft Word - Policy Flash 2010-67 Attachment 1 | Department...

    Office of Environmental Management (EM)

    67 Attachment 1 Microsoft Word - Policy Flash 2010-67 Attachment 1 Microsoft Word - Policy Flash 2010-67 Attachment 1 More Documents & Publications Acquisition Letter 2009-03...

  8. Property:NEPA ApplicationAttachments | Open Energy Information

    Open Energy Info (EERE)

    ApplicationAttachments Jump to: navigation, search Property Name NEPA ApplicationAttachments Property Type Page Description FONSI files for NEPA Docs. For example: Cover letters,...

  9. Building America Expert Meeting: Cladding Attachment Over Exterior...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Expert Meeting: Cladding Attachment Over Exterior Insulation Building Science Corporation (BSC) held an expert meeting on Cladding Attachment Over Exterior ...

  10. Attachment 3: Instructions for Use of Green Lease Solicitation...

    Energy Savers [EERE]

    Attachment 3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart Attachment 3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart...

  11. Attachment 2: Solicitation for Offers with New and Revised Green...

    Energy Savers [EERE]

    Attachment 2: Solicitation for Offers with New and Revised Green Lease Text Attachment 2: Solicitation for Offers with New and Revised Green Lease Text PDF icon Solicitation for...

  12. Attachment 1: Green Lease Policies and Procedures for Lease Acquisitio...

    Energy Savers [EERE]

    Attachment 1: Green Lease Policies and Procedures for Lease Acquisition Attachment 1: Green Lease Policies and Procedures for Lease Acquisition PDF icon Green Lease Policies and...

  13. Certification and Rating of Attachments for Fenestration Technologies...

    Energy Savers [EERE]

    Certification and Rating of Attachments for Fenestration Technologies (DE-FOA-0001000) Certification and Rating of Attachments for Fenestration Technologies (DE-FOA-0001000) ...

  14. 1982 Orders

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOCKET FE CITE DATE NUMBER APPLICANT NAME ORDER NO. 70116.ERA 121482 82-04-LNG PhillipsMarathon 49 70552.ERA 113082 82-09-NG Northern Natural Gas 48 70541.ERA 110182...

  15. Nuclear reactor fuel rod attachment system

    DOE Patents [OSTI]

    Christiansen, David W. (Kennewick, WA)

    1982-01-01

    A reusable system for removably attaching a nuclear reactor fuel rod (12) to a support member (14). A locking cap (22) is secured to the fuel rod (12) and a locking strip (24) is fastened to the support member (14). The locking cap (22) has two opposing fingers (24a and 24b) shaped to form a socket having a body portion (26). The locking strip has an extension (36) shaped to rigidly attach to the socket's body portion (26). The locking cap's fingers are resiliently deflectable. For attachment, the locking cap (22) is longitudinally pushed onto the locking strip (24) causing the extension (36) to temporarily deflect open the fingers (24a and 24b) to engage the socket's body portion (26). For removal, the process is reversed.

  16. Attachment device for an inflatable protective cushion

    DOE Patents [OSTI]

    Nelsen, J.M.; Luna, D.A.; Gwinn, K.W.

    1997-11-18

    An inflatable cushion assembly for use with an inflator comprises an inflatable cushion having an inner surface, outer surface, and at least one protrusion extending from one of the inner or outer surfaces. The inflatable cushion defines an opening between the inner surface and the outer surface for receiving the inflator. An attachment member contacts the one of the inner or outer surfaces adjacent the opening and includes a groove for receiving the protrusion, the attachment member securing the inflator within the opening. 22 figs.

  17. Attachment device for an inflatable protective cushion

    DOE Patents [OSTI]

    Nelsen, J.M.; Luna, D.A.; Gwinn, K.W.

    1998-12-08

    An inflatable cushion assembly for use with an inflator comprises an inflatable cushion having an inner surface, outer surface, and at least one protrusion extending from one of the inner or outer surfaces. The inflatable cushion defines an opening between the inner surface and the outer surface for receiving the inflator. An attachment member contacts the one of the inner or outer surfaces adjacent the opening and includes a groove for receiving the protrusion, the attachment member securing the inflator within the opening. 22 figs.

  18. Task Order Price Evaluation Worksheet for ESPCs | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Task Order Price Evaluation Worksheet for ESPCs Task Order Price Evaluation Worksheet for ESPCs Document lists a series of site-specific proposal data questions to answer for a task order. Microsoft Office document icon Download the Task Order Price Evaluation Worksheet. More Documents & Publications Task Order Price Evaluation Worksheet for SUPER ESPC Descriptions of ESPC Task Order Schedules and Placement of Pricing Information (IDIQ Attachment J-5) ESPC Task Order Financial Schedules

  19. ORISE Contract, SECTION J - List of Documents, Exhibits, and Other Attachments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PART III LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS SECTION J - LIST OF ATTACHMENTS J.1 LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS (MAY 1997)...................................................................................................................... 3 ATTACHMENT A - REPORTING REQUIREMENTS............................................. 5 ATTACHMENT B - GOVERNMENT FURNISHED AND ACQUIRED PROPERTY

  20. Methods of attaching erosion-resistant nonmetallic panels

    SciTech Connect (OSTI)

    Girzhel, A.M.

    1984-01-01

    Attachment methods for panels of wear-resistant nonmetallic materials, e.g. cast stone and slag, devitrified slag, and erosion-resistant and heat-resistant concretes to protect hopper, chute, and trough structures at metallurgical and coal industries have been investigated. Attachment methods can be divided into two groups, attachment by adhesives and by mechanical attachment. A new method of mechanical attachment, considered to be much superior to adhesive attachment, provides for reliable fastening without damage to the protected metal structure. Various panel designs may be used depending on the operating conditions.

  1. EECBG SEP Attachment 1 - Process metric list

    Energy Savers [EERE]

    EECBG 10-07B/SEP 10-006A Attachment 1: Process Metrics List Metric Area Metric Primary or Optional Metric Item(s) to Report On 1. Building Retrofits 1a. Buildings retrofitted, by sector Number of buildings retrofitted Square footage of buildings retrofitted 1b. Energy management systems installed, by sector Number of energy management systems installed Square footage of buildings under management 1c. Building roofs retrofitted, by sector Number of building roofs retrofitted Square footage of

  2. Attachment FY2011-55 OPAM

    Office of Environmental Management (EM)

    1, Summary of Small Business Administration and Department of Energy Partnership Agreement Reference: FAR 19.8 Overview Recently, the Secretary and the Administrator of the Small Business Administration (SBA) executed a Partnership Agreement to expedite the award of requirements pursuant to section 8(a) of the Small Business Act. It will remain in effect through September 30, 2012. A copy is attached. This section discusses the effects of that Partnership Agreement on the way Department of

  3. Cladding Attachment Over Thick Exterior Insulating Sheathing

    SciTech Connect (OSTI)

    Baker, P.; Eng, P.; Lepage, R.

    2014-01-01

    The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of both wood framed walls as well as mass masonry wall assemblies. For thick layers of exterior insulation (levels greater than 1.5 inches), the use of wood furring strips attached through the insulation back to the structure has been used by many contractors and designers as a means to provide a convenient cladding attachment location (Straube and Smegal 2009, Pettit 2009, Joyce 2009, Ueno 2010). The research presented in this report is intended to help develop a better understanding of the system mechanics involved and the potential for environmental exposure induced movement between the furring strip and the framing. BSC sought to address the following research questions: 1.What are the relative roles of the mechanisms and the magnitudes of the force that influence the vertical displacement resistance of the system? 2.Can the capacity at a specified deflection be reliably calculated using mechanics based equations? 3.What are the impacts of environmental exposure on the vertical displacement of furring strips attached directly through insulation back to a wood structure?

  4. Cladding Attachment Over Thick Exterior Insulating Sheathing

    SciTech Connect (OSTI)

    Baker, P.; Eng, P.; Lepage, R.

    2014-01-01

    The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of both wood framed walls as well as mass masonry wall assemblies. For thick layers of exterior insulation (levels greater than 1.5 inches), the use of wood furring strips attached through the insulation back to the structure has been used by many contractors and designers as a means to provide a convenient cladding attachment location (Straube and Smegal 2009, Pettit 2009, Joyce 2009, Ueno 2010). The research presented in this report is intended to help develop a better understanding of the system mechanics involved and the potential for environmental exposure induced movement between the furring strip and the framing. BSC sought to address the following research questions: 1. What are the relative roles of the mechanisms and the magnitudes of the force that influence the vertical displacement resistance of the system? 2. Can the capacity at a specified deflection be reliably calculated using mechanics based equations? 3. What are the impacts of environmental exposure on the vertical displacement of furring strips attached directly through insulation back to a wood structure?

  5. Attachment FY2011-12 | Department of Energy

    Office of Environmental Management (EM)

    2 Attachment FY2011-12 Indirect Cost Rate Administration Attachment FY2011-12 More Documents & Publications AcqGuide42pt1.doc&0; Acquisition Letter No. AL 2008-02 Department of...

  6. Attachment FY2011-9 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attachment FY2011-9 Attachment FY2011-9 FFRDC Determination for a Contract Competition More Documents & Publications Policy Flash 2013-30 Acquisition Letter on Acquisition Planning...

  7. AttachmentFlash_2010-65.pdf | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    65.pdf AttachmentFlash2010-65.pdf PDF icon AttachmentFlash2010-65.pdf More Documents & Publications fac2001-26.pdf DOELabor Leadership Roundtable Meeting Generic copy of DOE's...

  8. Dual-shank attachment design for omega seals

    DOE Patents [OSTI]

    Sattinger, Stanley S.

    1978-01-01

    An improved apparatus and process for attaching welded omega seal segments to reactor heads, standpipes, mechanisms, and plugs comprises a first shank in combination with a second shank to attach an omega seal at a metal-to-metal interface.

  9. Attachment FY2011-06 OPAM | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    SUMMARY OF PUBLIC LAW 111-240, THE SMALL BUSINESS JOBS ACT OF 2010 Attachment FY2011-06 OPAM More Documents & Publications Attachment FY2011-28 OPAM Chapter 19 - Small Business...

  10. SECTION L -ATTACHMENT B - LISTING OF KEY PERSONNEL

    National Nuclear Security Administration (NNSA)

    B, Page 1 SECTION L ATTACHMENT B LISTING OF KEY PERSONNEL TITLE NAME Note: Addremove extra rows if needed...

  11. Cable attachment for a radioactive brachytherapy source capsule

    DOE Patents [OSTI]

    Gross, Ian G; Pierce, Larry A

    2006-07-18

    In cancer brachytherapy treatment, a small californium-252 neutron source capsule is attached to a guide cable using a modified crimping technique. The guide cable has a solid cylindrical end, and the attachment employs circumferential grooves micromachined in the solid cable end. The attachment was designed and tested, and hardware fabricated for use inside a radioactive hot cell. A welding step typically required in other cable attachments is avoided.

  12. EECBG SEP Attachment 1 - Process metric list | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SEP Attachment 1 - Process metric list EECBG SEP Attachment 1 - Process metric list Reporting Guidance Process Metric List PDF icon eecbg_10_07b_sep__10_006a_attachment1_process_metric_list.pdf More Documents & Publications EECBG 10-07C/SEP 10-006B Attachment 1: Process Metrics List EECBG Program Notice 10-07A DOE Recovery Act Reporting Requirements for the State Energy Program

  13. Attachment 4: Unrevised SFO Paragraphs Reissued | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4: Unrevised SFO Paragraphs Reissued Attachment 4: Unrevised SFO Paragraphs Reissued PDF icon Unrevised SFO Paragraphs Reissued More Documents & Publications Attachment 2: Solicitation for Offers with New and Revised Green Lease Text Attachment 1: Green Lease Policies and Procedures for Lease Acquisition 1

  14. Microsoft Word - ATTACHMENT A Suppl 5.doc

    Energy Savers [EERE]

    ATTACHMENT A: Modeling in Support of Additional Two-Unit Operating Configurations Unit 1 & Unit 2 Operation - SO2 Table Mirant Potomac, Alexandria, Virginia Maximum Impacts Predicted by AERMOD-PRIME Compliance Based on Highest, Second-Highest Short-term and Highest Annual Concentrations Units 1 & 2 on 24 hrs/day @ Max load SO2 = 0.31 lb/MBtu for both units. AERMOD- PRIME Monitored Background AERMOD-PRIME + Background NAAQS Distance Direction Ground Elevation Flagpole Elevation X (m) Y

  15. Microsoft Word - Attachment coversheet.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    HANFORD MISSION SUPPORT CONTRACT ADVANCE UNDERSTANDING ON COST REVISED DECEMBER 31, 2014 Mission Support Contract Contract Number DE-AC06-09RL14728 Attachment J, Section J.8 Modification 479 ii CHANGE HISTORY Version Date Change Author Change Summary 6.0 December 31, 2014 Ricky Churchman Updated to incorporate: Retention as a part of the Hiring/Signing bonuses 5.1 August 26, 2014 Ricky Churchman Updated to incorporate: Use of Government/Contractor Leased Vehicles for Offsite Transportation 5.0

  16. Appendix DATA Attachment A: WIPP Borehole Update

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A: WIPP Borehole Update United States Department of Energy Waste Isolation Pilot Plant Carlsbad Field Office Carlsbad, New Mexico Appendix DATA-2014 Attachment A: WIPP Borehole Update Table of Contents DATA-A-1.0 WIPP Boreholes DATA-A-2.0 Individual Well Reports DATA-A-2.1 New Wells Drilled Since the CRA-2009 DATA-A-2.2 Plugged Wells DATA-A-3.0 References List of Tables Table DATA-A- 1. Status of WIPP Boreholes December 2012 WIPP Table DATA-A-1. Status of WIPP Boreholes December 2012 WIPP

  17. Predicting Envelope Leakage in Attached Dwellings

    SciTech Connect (OSTI)

    Faakye, O.; Arena, L.; Griffiths, D.

    2013-07-01

    The most common method for measuring air leakage is to use a single blower door to pressurize and/or depressurize the test unit. In detached housing, the test unit is the entire home and the single blower door measures air leakage to the outside. In attached housing, this 'single unit', 'total', or 'solo' test method measures both the air leakage between adjacent units through common surfaces as well air leakage to the outside. Measuring and minimizing this total leakage is recommended to avoid indoor air quality issues between units, reduce energy losses to the outside, reduce pressure differentials between units, and control stack effect. However, two significant limitations of the total leakage measurement in attached housing are: for retrofit work, if total leakage is assumed to be all to the outside, the energy benefits of air sealing can be significantly over predicted; for new construction, the total leakage values may result in failing to meet an energy-based house tightness program criterion. The scope of this research is to investigate an approach for developing a viable simplified algorithm that can be used by contractors to assess energy efficiency program qualification and/or compliance based upon solo test results.

  18. Vacuum die attach for integrated circuits

    DOE Patents [OSTI]

    Schmitt, E.H.; Tuckerman, D.B.

    1991-09-10

    A thin film eutectic bond for attaching an integrated circuit die to a circuit substrate is formed by coating at least one bonding surface on the die and substrate with an alloying metal, assembling the die and substrate under compression loading, and heating the assembly to an alloying temperature in a vacuum. A very thin bond, 10 microns or less, which is substantially void free, is produced. These bonds have high reliability, good heat and electrical conduction, and high temperature tolerance. The bonds are formed in a vacuum chamber, using a positioning and loading fixture to compression load the die, and an IR lamp or other heat source. For bonding a silicon die to a silicon substrate, a gold silicon alloy bond is used. Multiple dies can be bonded simultaneously. No scrubbing is required. 1 figure.

  19. Vacuum die attach for integrated circuits

    DOE Patents [OSTI]

    Schmitt, Edward H.; Tuckerman, David B.

    1991-01-01

    A thin film eutectic bond for attaching an integrated circuit die to a circuit substrate is formed by coating at least one bonding surface on the die and substrate with an alloying metal, assembling the die and substrate under compression loading, and heating the assembly to an alloying temperature in a vacuum. A very thin bond, 10 microns or less, which is substantially void free, is produced. These bonds have high reliability, good heat and electrical conduction, and high temperature tolerance. The bonds are formed in a vacuum chamber, using a positioning and loading fixture to compression load the die, and an IR lamp or other heat source. For bonding a silicon die to a silicon substrate, a gold silicon alloy bond is used. Multiple dies can be bonded simultaneously. No scrubbing is required.

  20. Dissociative electron attachment studies on acetone

    SciTech Connect (OSTI)

    Prabhudesai, Vaibhav S. Tadsare, Vishvesh; Ghosh, Sanat; Gope, Krishnendu; Davis, Daly; Krishnakumar, E.

    2014-10-28

    Dissociative electron attachment (DEA) to acetone is studied in terms of the absolute cross section for various fragment channels in the electron energy range of 020 eV. H{sup ?} is found to be the most dominant fragment followed by O{sup ?} and OH{sup ?} with only one resonance peak between 8 and 9 eV. The DEA dynamics is studied by measuring the angular distribution and kinetic energy distribution of fragment anions using Velocity Slice Imaging technique. The kinetic energy and angular distribution of H{sup ?} and O{sup ?} fragments suggest a many body break-up for the lone resonance observed. The ab initio calculations show that electron is captured in the multi-centered anti-bonding molecular orbital which would lead to a many body break-up of the resonance.

  1. Microsoft Word - Flash2008-09Attachment.doc | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    9Attachment.doc More Documents & Publications Flash2007-02Attachment.doc&0; Microsoft Word - AL2000-05Attachment.doc Flash2007-03Attachment.doc&0;...

  2. Microsoft Word - Attachment J-5 Continuity of Operations Plan.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5-1 ATTACHMENT J.5 CONTINUITY OF OPERATIONS

  3. Microsoft Word - AL2000-05Attachment.doc | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attachment.doc Microsoft Word - AL2000-05Attachment.doc PDF icon Microsoft Word - AL2000-05Attachment.doc More Documents & Publications al99-06attachment.doc&0; EXHIBIT A: CRADA,...

  4. Certification and Rating of Attachments for Fenestration Technologies

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (DE-FOA-0001000) | Department of Energy Certification and Rating of Attachments for Fenestration Technologies (DE-FOA-0001000) Certification and Rating of Attachments for Fenestration Technologies (DE-FOA-0001000) November 5, 2013 - 4:43pm Addthis This funding opportunity is closed Through this Funding Opportunity Announcement (FOA) the Building Technologies Office (BTO) seeks to establish a performance rating mechanism for assessing the energy performance of fenestration attachments. DOE

  5. Building America Expert Meeting: Cladding Attachment Over Exterior

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Insulation | Department of Energy Cladding Attachment Over Exterior Insulation Building America Expert Meeting: Cladding Attachment Over Exterior Insulation Building Science Corporation (BSC) held an expert meeting on Cladding Attachment Over Exterior Insulation on Saturday, July 28, 2012 at the Westford Regency Hotel in Westford, Massachusetts. Featured speakers included Jay Crandell of ARES Consulting, Peter Baker of BSC, Gary Parsons of DOW Chemical Company, Vladimir Kochkin of the

  6. Attachment 3: Instructions for Use of Green Lease Solicitation Paragraph

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reference Chart | Department of Energy 3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart Attachment 3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart PDF icon green_instructions_attach3.pdf More Documents & Publications Green Lease Policies and Procedures for Lease Acquisition Attachment 1: Green Lease Policies and Procedures for Lease Acquisition Microsoft Word - AL2008-05.doc

  7. Dissociative electron attachments to ethanol and acetaldehyde: A combined

    Office of Scientific and Technical Information (OSTI)

    experimental and simulation study (Journal Article) | SciTech Connect Dissociative electron attachments to ethanol and acetaldehyde: A combined experimental and simulation study Citation Details In-Document Search Title: Dissociative electron attachments to ethanol and acetaldehyde: A combined experimental and simulation study Dissociation dynamics of the temporary negative ions of ethanol and acetaldehyde formed by the low-energy electron attachments is investigated by using the anion

  8. Predicting Envelope Leakage in Attached Dwellings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Predicting Envelope Leakage in Attached Dwellings Predicting Envelope Leakage in Attached Dwellings This presentation was delivered at the U.S. Department of Energy Building America Technical Update meeting on April 29-30, 2013, in Denver, Colorado. PDF icon predicting_envelope_leakage_griffiths.pdf More Documents & Publications Building America Technology Solutions for New and Existing Homes: Predicting Envelope Leakage in Attached Dwellings (Fact Sheet) Key Issues Building America Webinar:

  9. Expert Meeting Report: Cladding Attachment Over Exterior Insulation

    Energy Savers [EERE]

    ... Presented at the BEST3 Conference, Atlanta, GA. Parsons G.; Hansboro, J.; Lapham, M.; Mazor, M.; Shembekar, P.; Maurer, M. (2011). "Three- Coat Stucco Veneer Cladding Attachment ...

  10. Section L Attachment I - Summary and Fee Sheet Amendment 000002...

    National Nuclear Security Administration (NNSA)

    within the submitted MS Excel electronic spreadsheets and workbooks. Section L Attachment I Summary and Fee Sheet Amendment 000002 mulas and links intact and all cells...

  11. Attachment 3 b. Part A Page 1 of 6

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attachment 3 b. Part A Page 1 of 6 Section A - General Terms and Conditions ................................................................................................ 2 A.1. Purpose .................................................................................................................................................. 2 A.2. Authority ............................................................................................................................................... 2

  12. SECTION L -ATTACHMENT B - LISTING OF KEY PERSONNEL

    National Nuclear Security Administration (NNSA)

    B, Page 1 SECTION L ATTACHMENT B LISTING OF KEY PERSONNEL TITLE NAME [Note: Add/remove extra rows if needed]

  13. Microsoft Word - Policy Flash 2010-82 Attachment 1 | Department...

    Broader source: Energy.gov (indexed) [DOE]

    2 Attachment 1 More Documents & Publications Policy Flash 2010-82 Microsoft Word - Policy Flash 2008-07.doc Microsoft Word - Policy Flash 2008-10.doc...

  14. FLASH2003-12attachment.pdf | Department of Energy

    Office of Environmental Management (EM)

    FLASH2003-12attachment.pdf More Documents & Publications Flash2004-19.pdf Document DOE Princeton Plasma Physics Laboratory Purchase Power Agreement Request for Proposal...

  15. Microsoft Word - Attachment B - Reporting Requirements.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DE-SOL-0003339 J.1 ATTACHMENT B - REPORTING REQUIREMENTS REPORTING REQUIREMENTS CHECKLIST 1. AWARDEE: 2. IDENTIFICATION NUMBER: REPORT SUBMISSION: Reports shall be submitted to the...

  16. Section L - Attachment D - Past-Performance Information Form

    National Nuclear Security Administration (NNSA)

    Pending or Underway Terminated for Convenience Terminated for Default Other (explain) If more space is needed, please attach additional pages. Request for Proposal No. ...

  17. Attachment 1: Green Lease Policies and Procedures for Lease Acquisitio...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Green Lease Policies and Procedures for Lease Acquisition Attachment 2: Solicitation for Offers with New and Revised Green Lease Text Energy Efficiency in Separate Tenant Spaces - ...

  18. Attachment 3: Instructions for Use of Green Lease Solicitation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart Attachment 3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart PDF icon ...

  19. Attachment 2: Solicitation for Offers with New and Revised Green...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2: Solicitation for Offers with New and Revised Green Lease Text Attachment 2: Solicitation for Offers with New and Revised Green Lease Text PDF icon Solicitation for Offers ...

  20. Appendix DATA Attachment B: WIPP Waste Containers and Emplacement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Carlsbad Field Office Carlsbad, New Mexico Appendix DATA-2014 Attachment B: WIPP Waste Containers and Emplacement Table of Contents DATA-B-1.0 Authorized Waste Emplacement ...

  1. Building America Case Study: Predicting Envelope Leakage in Attached...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    team, Consortium for Advanced Residential Buildings (CARB), performed statistical analysis on blower door test results from 236 attached dwelling units in 17 apartment complexes. ...

  2. Bonneville Power Administration Attachment P Oversupply Management...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    reduced generation in order to meet the Transmission Customers' schedules. The Oversupply Management Protocol will apply as follows: 1. Before displacing generation under this...

  3. Prediction of substrate removal rates of attached microorganisms and of relative contributions of attached and suspended communities at field sites

    SciTech Connect (OSTI)

    Lewis, D.L.; Gattie, D.K.

    1988-02-01

    A mathematical model composed of a direct proportionality relationship between bulk water velocities and field-determined second-order microbial transformation rate coefficients, and the relative rate coefficient of a benchmark chemical, was developed for estimating the substrate removal rates of rapidly degraded chemicals by attached microorganisms in shallow (less than 1 m deep) aquatic ecosystems. Data from 31 field experiments involving the addition of 2,4-dichlorophenoxyacetic acid methyl ester (2,4-DME) in nine field areas were used to determine a field-derived second-order rate coefficient for microbial transformation of the ester. By using 2,4-DME as a benchmark chemical, the model was used to predict microbial transformation rates of the butoxyethyl ester of 2,4-dichlorophenoxyacetic acid (2,4-DBE) at five other field sites. The predicted half-lives of 2,4-DBE varied 1500-fold and were within about a 3-fold range or less of the measured half-lives.

  4. Microsoft Word - Attachment J-2 Hardware and Software System Requirements.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    J-2-1 ATTACHMENT J.2 HARDWARE AND SOFTWARE SYSTEM REQUIREMENTS a. The Contractor shall provide a DOD 5015.x compliant individual electronic file system for each open claim in addition to the paper file system. All claim files must be part of a single, orderly central computerized file storage system which includes the software and hardware. This system shall be used to receive, record, locate and sort all assigned claims and related data. Should the Contractor change the data base management

  5. DE-SOL-0002555 WIPP Solicitation J-33 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT H: RESERVED

  6. DE-SOL-0008449 Attachment L-2b

    National Nuclear Security Administration (NNSA)

    level testing for NSDD Core installations DE-SOL-0008449 Attachment L-2b [Submit in Volume II, TAB 1] Instructions Attachment L-2b: Note: Attachment L-1a is limited to one (1) 8 ½ x 11 page limit. Experiences provided must be relevant to the work that the team member will be performing under this contract. The Offeror shall explain how the work performed by the experience is relevant to the indicator. Relevance is defined by Indicator as follows: A. Relevance to indicator A. is defined as

  7. Microsoft Word - Attachment G2E.doc

    Office of Environmental Management (EM)

    E DESIGN DRAWINGS SHAFT SEALING SYSTEM COMPLIANCE SUBMITTAL DESIGN REPORT Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT G2E Page G2E-1 of 38 1 Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT G2E Page G2E-2 of 38 1 Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT G2E Page G2E-3 of

  8. River Corridor Closure Contract Section J, Attachment J-13

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 Contract No. DE-AC06-08RL14655 A000 1 ATTACHMENT J-13 HANFORD SITE SERVICES Hanford Site Services are divided into three categories: Category 1: DOE will provide these Mandatory...

  9. Part III - List of Documents, Exhibits, and Other Attachments

    National Nuclear Security Administration (NNSA)

    ANSI 8.23 1997 Nuclear Criticality Accident Emergency Planning and Response DOE O ... DOE O 225.1B, Attachment 1 CRD 030411 Accident Investigations 165 052711 DOE O ...

  10. Attachment FY2011-58 OPAM | Department of Energy

    Energy Savers [EERE]

    INFORMATION REPORTING Attachment FY2011-58 OPAM More Documents & Publications Chapter 35 - Research and Development Contracting AcqGuide35pt1rev2.doc&0; Federal Assistance...

  11. Microsoft Word - Policy Flash 2010-78 Attachment 1 Unsuccessful...

    Office of Environmental Management (EM)

    1 Unsuccessful Offeror Letter Template-Final 8-17-10 Microsoft Word - Policy Flash 2010-78 Attachment 1 Unsuccessful Offeror Letter Template-Final 8-17-10 Microsoft Word -...

  12. Microsoft Word - Policy Flash 2010-78 Attachment 3 Conflicts...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 Conflicts of Interest Cert- template-Final 8-17-10 Microsoft Word - Policy Flash 2010-78 Attachment 3 Conflicts of Interest Cert- template-Final 8-17-10 Microsoft Word -...

  13. Microsoft Word - Policy Flash 2010-78 Attachment 2 Confidentiality...

    Energy Savers [EERE]

    2 Confidentiality Cert template-Final 8-17-10 Microsoft Word - Policy Flash 2010-78 Attachment 2 Confidentiality Cert template-Final 8-17-10 Microsoft Word - Policy Flash...

  14. Microsoft Word - Policy Flash 2010-78 Attachment 4 Successful...

    Office of Environmental Management (EM)

    4 Successful Offeror Letter Template-Final 8-17-10 Microsoft Word - Policy Flash 2010-78 Attachment 4 Successful Offeror Letter Template-Final 8-17-10 Microsoft Word - Policy...

  15. DE-SOL-0008449 Attachment L-2b

    National Nuclear Security Administration (NNSA)

    DE-SOL-0008449 Attachment L-2b Submit in Volume II, TAB 1 EXAMPLE Offeror: XYZ Company Indicator Summary Matrix Indicator Experience 1 Experience 2 Experience 3 A. Owned and...

  16. Attachment FY2011-31 OPAM | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    attachment 3 flow chart of new 17.5 FAR Team update based on FAC2005-47 Dec 13, 2010 More Documents & Publications Flash2011-31 OPAM Flash2011-26 OPAM ATTACHMENTFLASH2011-26-OPAM...

  17. PART III -LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6 Occupational Medical Services at Hanford J-2-1 Section J Attachment J-2 LIST OF APPLICABLE DOE DIRECTIVES - LIST B The DOE Directives listed below contain requirements relevant to the scope of work under this contract. In most cases, the requirements applicable to the Contractor are contained in the Contractor Requirement Document attached to the DOE directive. These directives are applicable, in whole or in part, in accordance with Section I Clause entitled "DEAR 970.5204-2 LAWS,

  18. Pressurizer with a mechanically attached surge nozzle thermal sleeve

    DOE Patents [OSTI]

    Wepfer, Robert M

    2014-03-25

    A thermal sleeve is mechanically attached to the bore of a surge nozzle of a pressurizer for the primary circuit of a pressurized water reactor steam generating system. The thermal sleeve is attached with a series of keys and slots which maintain the thermal sleeve centered in the nozzle while permitting thermal growth and restricting flow between the sleeve and the interior wall of the nozzle.

  19. Attachment 1: Green Lease Policies and Procedures for Lease Acquisition |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 1: Green Lease Policies and Procedures for Lease Acquisition Attachment 1: Green Lease Policies and Procedures for Lease Acquisition PDF icon Green Lease Policies and Procedures for Lease Acquisition More Documents & Publications Green Lease Policies and Procedures for Lease Acquisition Attachment 2: Solicitation for Offers with New and Revised Green Lease Text Energy Efficiency in Separate Tenant Spaces - A Feasibility Study

  20. River Corridor Closure Contract Section J, Attachment J-6

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6 Contract No. DE-AC06-05RL14655 Mod 459 1 ATTACHMENT J-6 ADVANCE AGREEMENT, PERSONNEL, AND RELATED COSTS This attachment will be prepared subsequent to Contract award pursuant to Clause H.15, Advance Understanding on Costs. The advance understandings listed below are subject to the specific limitations, conditions, and exclusions of subpart 31.2 of FAR as supplemented by Department of Energy Acquisition Regulation (DEAR) 931.2. TYPE OF COST ALLOWABILITY CLARIFICATION Beryllium Testing/Travel

  1. Collimator with attachment mechanism and system (Patent) | DOEPatents

    Office of Scientific and Technical Information (OSTI)

    Data Explorer Search Results Collimator with attachment mechanism and system Title: Collimator with attachment mechanism and system A self-aligning collimator for a radiation imaging device that is secured and aligned through the use of a plurality of small magnets. The collimator allows for the rapid exchange, removal, or addition of collimators for the radiation imaging device without the need for tools. The accompanying method discloses the use of magnets and accompanying magnetic fields to

  2. Microsoft Word - Attachment G1H.doc

    Office of Environmental Management (EM)

    APPENDIX H DESIGN DRAWINGS PANEL CLOSURE SYSTEM WASTE ISOLATION PILOT PLANT CARLSBAD, NEW MEXICO Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT G1H Page G1H-i ATTACHMENT G1 APPENDIX H DESIGN DRAWINGS PANEL CLOSURE SYSTEM WASTE ISOLATION PILOT PLANT CARLSBAD, NEW MEXICO Drawing Title 762447-E1 Panel closure system, air intake and exhaust drifts, title sheet

  3. Microsoft Word - Attachment G2A.doc

    Office of Environmental Management (EM)

    A MATERIAL SPECIFICATION SHAFT SEALING SYSTEM COMPLIANCE SUBMITTAL DESIGN REPORT Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT G2A Page G2A-i ATTACHMENT G2 APPENDIX A MATERIAL SPECIFICATION SHAFT SEALING SYSTEM COMPLIANCE SUBMITTAL DESIGN REPORT Appendix A Abstract This appendix specifies material characteristics for shaft seal system components designed

  4. Microsoft Word - Attachment G2B.doc

    Office of Environmental Management (EM)

    B SHAFT SEALING CONSTRUCTION PROCEDURES SHAFT SEALING SYSTEM COMPLIANCE SUBMITTAL DESIGN REPORT Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT G2B Page G2B-i ATTACHMENT G2 APPENDIX B SHAFT SEALING CONSTRUCTION PROCEDURES SHAFT SEALING SYSTEM COMPLIANCE SUBMITTAL DESIGN REPORT Appendix B Abstract This appendix describes equipment and procedures used to

  5. Polymers incorporating covalently attached organoimido polyoxometalates

    DOE Patents [OSTI]

    Maatta, Eric A.; Moore, Aaron R.

    2004-03-16

    New polyoxometalate compounds and polymers comprising recurring monomers of those compounds are provided. The compounds are formed by replacing at least one oxide of the starting polyoxometalate with an organoimido (NR) group bonded to the polyoxometalate via a triple bond to the nitrogen atom. The R of the (NR) group comprises a reactive functional group which renders the compound readily polymerizable, alone or with other monomers (e.g., divinylbenzene), to form the inventive polymers. Additionally, a countercation (e.g., bis(tetra-n-butylammonium)) can be mixed with the polyoxometalate compounds in order to neutralize the negative charge thereof as well as to make those compounds more soluble in organic solvents.

  6. RS1477_Attachment B.pdf

    Office of Environmental Management (EM)

    RFA-14-0002 - In the Matter of Highway Oil, Inc. RFA-14-0002 - In the Matter of Highway Oil, Inc. On December 10, 2014, OHA released funds held in escrow for Highway Oil, Inc. (Highway) in the Subpart V refund proceeding. Highway submitted five applications for refunds in five different Subpart V proceedings and was granted refunds in each proceeding. During the time that these refunds were granted to Highway, Highway was the subject of a Proposed Remedial Order (PRO) issued by the Economic

  7. Microsoft Word - Flash2008-08attachmentFAC22.doc | Department...

    Energy Savers [EERE]

    Flash2008-08attachmentFAC22.doc Microsoft Word - Flash2008-08attachmentFAC22.doc Microsoft Word - Flash2008-08attachmentFAC22.doc More Documents & Publications Policy Flash 2013-75...

  8. Attachment A: Modeling in Support of Additional Two-Unit Operating...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations Docket No. ...

  9. Microsoft PowerPoint - Window_Attachments-Webinar-Oct_28_2015...

    Energy Savers [EERE]

    Building America Energy Savings from Window Attachments: Please Mind the Gap Moderator: ... an economist with PNNL and team lead of Building America's Window Attachments Program. Ms. ...

  10. Polymers with increased order

    DOE Patents [OSTI]

    Sawan, Samuel P.; Talhi, Abdelhafid; Taylor, Craig M.

    1998-08-25

    The invention features polymers with increased order, and methods of making them featuring a dense gas.

  11. Microsoft Word - Attachment J-6 List of Applicable DOE Directives and COntractor Requirements Documents.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    J-6-1 ATTACHMENT J.6 LIST OF APPLICABLE DOE DIRECTIVES AND CONTRACTOR REQUIREMENTS DOCUMENTS (LIST B) The following is a list of applicable DOE Directives and Orders appended to this Contract as prescribed in Section I, Clause I.3. This list is not all inclusive. Document Number Title CRD O 150.1 Continuity Programs CRD O 205.1b, Chg.3 DOE Cyber Program CRD O 206.1 DOE Privacy Program CRD O 243.1B, Admin. Chg 1. Records Management Program CRD O 414.1D, Admin Chg 1. Quality Assurance CRD O

  12. Compliance Order on Consent

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Compliance Order on Consent Compliance Order on Consent The Compliance Order on Consent provides the requirements for environmental cleanup of hazardous constituents for LANL. Contact Environmental Communication & Public Involvement P.O. Box 1663 MS M996 Los Alamos, NM 87545 (505) 667-0216 Email What is the Compliance Order on Consent? The Compliance Order on Consent between the State of New Mexico Environment Department and the United States Department of Energy and Los Alamos National

  13. Reliability Testing the Die-Attach of CPV Cell Assemblies

    SciTech Connect (OSTI)

    Bosco, N.; Sweet, C.; Kurtz, S.

    2011-02-01

    Results and progress are reported for a course of work to establish an efficient reliability test for the die-attach of CPV cell assemblies. Test vehicle design consists of a ~1 cm2 multijunction cell attached to a substrate via several processes. A thermal cycling sequence is developed in a test-to-failure protocol. Methods of detecting a failed or failing joint are prerequisite for this work; therefore both in-situ and non-destructive methods, including infrared imaging techniques, are being explored as a method to quickly detect non-ideal or failing bonds.

  14. Section L - Attachment D - Past-Performance Information Form

    National Nuclear Security Administration (NNSA)

    L, Attachment E, Page 1 SECTION L ATTACHMENT E PAST PERFORMANCE INFORMATION FORM 1. Complete Name of Offeror or Team Member 2. Contract Title and Location 3. Customer Name, Current Address, Telephone Number and E-mail 4. Contract Number and Type of Contract 5. Date of Contract Award 6. Date Work Commenced 7. Date the Work was Completed 8. Initial Contract Price /Estimated Cost and Fee 9. Final Amount Invoiced/Amount Invoiced to Date 10a. Technical Point of Contact (see instruction below) 10b.

  15. Biocompatible implants and methods of making and attaching the same

    DOE Patents [OSTI]

    Rowley, Adrian P; Laude, Lucien D; Humayun, Mark S; Weiland, James D; Lotfi, Atoosa; Markland, Jr., Francis S

    2014-10-07

    The invention provides a biocompatible silicone implant that can be securely affixed to living tissue through interaction with integral membrane proteins (integrins). A silicone article containing a laser-activated surface is utilized to make the implant. One example is an implantable prosthesis to treat blindness caused by outer retinal degenerative diseases. The device bypasses damaged photoreceptors and electrically stimulates the undamaged neurons of the retina. Electrical stimulation is achieved using a silicone microelectrode array (MEA). A safe, protein adhesive is used in attaching the MEA to the retinal surface and assist in alleviating focal pressure effects. Methods of making and attaching such implants are also provided.

  16. Interface structure for hub and mass attachment in flywheel rotors

    DOE Patents [OSTI]

    Deteresa, Steven J.; Groves, Scott E.

    1998-06-02

    An interface structure for hub and mass attachment in flywheel rotors. The interface structure efficiently transmits high radial compression forces and withstands both large circumferential elongation and local stresses generated by mass-loading and hub attachments. The interface structure is comprised of high-strength fiber, such as glass and carbon, woven into an angle pattern which is about 45.degree. with respect to the rotor axis. The woven fiber is bonded by a ductile matrix material which is compatible with and adheres to the rotor material. This woven fiber is able to elongate in the circumferential direction to match the rotor growth during spinning.

  17. Interface structure for hub and mass attachment in flywheel rotors

    DOE Patents [OSTI]

    Deteresa, S.J.; Groves, S.E.

    1998-06-02

    An interface structure is described for hub and mass attachment in flywheel rotors. The interface structure efficiently transmits high radial compression forces and withstands both large circumferential elongation and local stresses generated by mass-loading and hub attachments. The interface structure is comprised of high-strength fiber, such as glass and carbon, woven into an angle pattern which is about 45{degree} with respect to the rotor axis. The woven fiber is bonded by a ductile matrix material which is compatible with and adheres to the rotor material. This woven fiber is able to elongate in the circumferential direction to match the rotor growth during spinning. 2 figs.

  18. Apparatus for attaching a cleaning tool to a robotic manipulator

    DOE Patents [OSTI]

    Killian, Mark A.; Zollinger, W. Thor

    1992-01-01

    An apparatus for connecting a cleaning tool to a robotic manipulator so that the tool can be used in contaminated areas on horizontal, vertical and sloped surfaces. The apparatus comprises a frame and a handle, with casters on the frame to facilitate movement. The handle is pivotally and releasibly attached to the frame at a preselected position of a plurality of attachment positions. The apparatus is specifically configured for the KELLY VACUUM SYSTEM but can be modified for use with any standard mobile robot and cleaning tool.

  19. Part III - List of Documents, Exhibits, and Other Attachments

    National Nuclear Security Administration (NNSA)

    Updated 9/30/15 to Mod 0588 Contract No. DE-AC04-94AL85000 Modification No. M202 Section J - Page 1 Part III - List of Documents, Exhibits, and Other Attachments Section J LIST OF ATTACHMENTS Document Appendix A - Personnel Appendix (Revised RAs 1-12 and Mods M0541, M0558) Appendix B - Statement of Work (Revised M244, M264) Appendix C - Special Bank Account Agreement (Revised M248, M271, M461, M497, M508) Appendix D - Key Personnel (Revised M216, M224, M227, M229, M233, M252, M257, M272, M275,

  20. Section L - Attachment D - Past-Performance Information Form

    National Nuclear Security Administration (NNSA)

    L, Attachment E, Page 1 SECTION L ATTACHMENT E PAST PERFORMANCE INFORMATION FORM 1. Complete Name of Offeror or Team Member 2. Contract Title and Location 3. Customer Name, Current Address, Telephone Number and E-mail 4. Contract Number and Type of Contract 5. Date of Contract Award 6. Date Work Commenced 7. Date the Work was Completed 8. Initial Contract Price /Estimated Cost and Fee 9. Final Amount Invoiced/Amount Invoiced to Date 10a. Technical Point of Contact (see instruction below) 10b.

  1. Apparatus for attaching a cleaning tool to a robotic manipulator

    DOE Patents [OSTI]

    Killian, M.A.; Zollinger, W.T.

    1992-09-22

    An apparatus is described for connecting a cleaning tool to a robotic manipulator so that the tool can be used in contaminated areas on horizontal, vertical and sloped surfaces. The apparatus comprises a frame and a handle, with casters on the frame to facilitate movement. The handle is pivotally and releasibly attached to the frame at a preselected position of a plurality of attachment positions. The apparatus is specifically configured for the Kelly Vacuum System but can be modified for use with any standard mobile robot and cleaning tool. 14 figs.

  2. Method for detecting pathogens attached to specific antibodies

    DOE Patents [OSTI]

    Miles, Robin R.; Venkateswaran, Kodumudi S.; Fuller, Christopher K.

    2005-01-25

    The use of impedance measurements to detect the presence of pathogens attached to antibody-coated beads. In a fluidic device antibodies are immobilized on a surface of a patterned interdigitated electrode. Pathogens in a sample fluid streaming past the electrode attach to the immobilized antibodies, which produces a change in impedance between two adjacent electrodes, which impedance change is measured and used to detect the presence of a pathogen. To amplify the signal, beads coated with antibodies are introduced and the beads would stick to the pathogen causing a greater change in impedance between the two adjacent electrodes.

  3. Impedance measurements for detecting pathogens attached to antibodies

    DOE Patents [OSTI]

    Miles, Robin R.; Venkateswaran, Kodumudi S.; Fuller, Christopher K.

    2004-12-28

    The use of impedance measurements to detect the presence of pathogens attached to antibody-coated beads. In a fluidic device antibodies are immobilized on a surface of a patterned interdigitated electrode. Pathogens in a sample fluid streaming past the electrode attach to the immobilized antibodies, which produces a change in impedance between two adjacent electrodes, which impedance change is measured and used to detect the presence of a pathogen. To amplify the signal, beads coated with antibodies are introduced and the beads would stick to the pathogen causing a greater change in impedance between the two adjacent electrodes.

  4. Apparatus for attaching a cleaning tool to a robotic manipulator

    DOE Patents [OSTI]

    Killian, M.A.; Zollinger, W.T.

    1991-01-01

    This invention is comprised of an apparatus for connecting a cleaning tool to a robotic manipulator so that the tool can be used in contaminated areas on horizontal, vertical and sloped surfaces. The apparatus comprises a frame and a handle, with casters on the frame to facilitate movement. The handle is pivotally and releasibly attached to the frame at a preselected position of a plurality of attachment positions. The apparatus is specifically configured for the KELLY VACUUM SYSTEM but can be modified for use with any standard mobile robot and cleaning tool.

  5. Appendix DATA Attachment B: WIPP Waste Containers and Emplacement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Attachment B: WIPP Waste Containers and Emplacement United States Department of Energy Waste Isolation Pilot Plant Carlsbad Field Office Carlsbad, New Mexico Appendix DATA-2014 Attachment B: WIPP Waste Containers and Emplacement Table of Contents DATA-B-1.0 Authorized Waste Emplacement Containers DATA-B-1.1 Container Descriptions DATA-B-1.2 Dunnage Containers DATA-B-1.3 Payload Descriptions DATA-B-1.4 Emplacement Configurations DATA-B-2.0 References List of Figures Figure DATA-B- 1. 55-gal Drum

  6. Methods and materials for nanocrystalline surface coatings and attachment of peptide amphiphile nanofibers thereon

    DOE Patents [OSTI]

    Stupp, Samuel I.; Spoerke, Erik D.; Anthony, Shawn G.; Niece; Krista L.

    2008-06-24

    Biocompatible composites comprising peptide amphiphiles and surface modified substrates and related methods for attachment thereon.

  7. Consent Order public meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Consent Order public meeting Consent Order public meeting WHEN: Apr 28, 2016 5:00 PM - 7:00 PM WHERE: Los Alamos County Council Chambers CATEGORY: Community TYPE: Meeting INTERNAL: Calendar Login Event Description On March 1, 2005, NMED, the Department of Energy (DOE) and the Regents of the University of California entered into the 2005 Consent Order that prescribed fence-to-fence cleanup requirements for the Laboratory. The public comment period on the Consent Order closes May 16, 2016

  8. River Corridor Closure Contract Section J, Attachment J-8

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 Contract No. DE-AC06-05RL14655 A000 1 ATTACHMENT J-8 EMPLOYEE BENEFITS AND PENSION PLANS Pursuant to application employee benefit and pension requirements in Contract Section H, Special Contract Requirement, the Contractor shall annually submit the Report of Contractor Expenditures for Employee Supplemental Compensation

  9. Attached-sunspace designs: a nationwide economic appraisal

    SciTech Connect (OSTI)

    Roach, F.; Kirschner, C.

    1980-01-01

    Performance estimates for attached-sunspace passive solar heated residences have recently been incorporated into the Los Alamos/UNM EASE III model. These estimates are used to analyze the economic performance of a fixed dimension sunspace design when attached to a pre-existing single family residential unit. The sunspace is a passive design which can be easily and effectively adapted to a retrofit situation. Several key parameters are carefully evaluated for the sunspace retrofit design. These include loan or mortgage terms, ownership period, resale potential and competing conventional fuel prices. General economic and design parameters are combined in a variant of life cycle costing to evaluate the feasibility of both owner-built and contractor-built attached sunspaces for 220 regions in the contiguous United States. This evaluation is made for two conventional fuel types - natural gas and electric resistance - and for three resale values - 0%, 100%, and 200%. Results show that the prospect for conventional fuel displacement through retrofit of attached sunspaces is very good with the design's economic performance enhanced in regions with expensive conventional fuel alternatives.

  10. New methods of nozzle attachment to FRP spray headers

    SciTech Connect (OSTI)

    Boucher, E.J.

    1995-06-01

    The traditional method of attaching spray nozzles to FRP spray headers in the absorber tower of a wet limestone system has been through the use of 150 lb. Flanges. This paper will illustrate two additional methods (grooved adapters & adhesive bonded nozzles) and will demonstrate the cost saving associated versus the flanged option, as well as the advantages and disadvantages of each system.

  11. Portsmouth Administrative Consent Order

    Broader source: Energy.gov [DOE]

    Portsmouth Administrative Consent Order ensures compliance by DOE at the Portsmouth Site with the Resource Recovery and Compensation Act, the Comprehensive Environmental Response, Compensation, and...

  12. HSI Tape Ordering

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tape Ordering HSI Tape Ordering General Procedure If you are retrieving multiple files from HPSS, it is best to order your retrieval requests in a way that makes sense for the HPSS system. In HPSS, files initially go onto a disk cache and migrate to tape as time passes. This means that files that were put into HPSS at the same time could end up spread across multiple tapes. Since each tape must by loaded into the reader, it will be fastest if you order your requests so that you are pulling all

  13. ACTION MEMO: Technical Position on the Use of National Consensus and Building Codes to Meet DOE Order 420. I B.

    Broader source: Energy.gov [DOE]

    The attached technical position on the Use of National Consensus and Building Codes to meet Department of Energy (DOE) Order 420.1b Facility Safety, clarifies the use of national consensus and...

  14. Directives System Order

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1995-10-16

    The order prescribes the process for development of Policy Statements, Orders, Notices, Manuals and Guides, which are intended to guide, inform, and instruct employees in the performance of their jobs, and enable them to work effectively within the Department and with agencies, contractors, and the public.

  15. Shunt attachment and method for interfacing current collection systems

    DOE Patents [OSTI]

    Denney, P.E.; Iyer, N.C.; Hannan, W.F. III.

    1992-12-08

    A composite brush to shunt attachment wherein a volatile component of a composite but mostly metallic brush, used for current collection purposes, does not upon welding or brazing, adversely affect the formation of the interfacial bond with a conductive shunt which carries the current from the zone of the brush. The brush to shunt attachment for a brush material of copper-graphite composite and a shunt of copper, or substituting silver for copper as an alternative, is made through a hot isostatic pressing (HIP). The HIP process includes applying high pressure and temperature simultaneously at the brush to shunt interface, after it has been isolated or canned in a metal casing in which the air adjacent to the interface has been evacuated and the interfacial area has been sealed before the application of pressure and temperature. 6 figs.

  16. Shunt attachment and method for interfacing current collection systems

    DOE Patents [OSTI]

    Denney, Paul E. (State College, PA); Iyer, Natraj C. (Columbia, SC); Hannan, III, William F. (Monroeville Boro, PA)

    1992-01-01

    A composite brush to shunt attachment wherein a volatile component of a composite but mostly metallic brush, used for current collection purposes, does not upon welding or brazing, adversely affect the formation of the interfacial bond with a conductive shunt which carries the current from the zone of the brush. The brush to shunt attachment for a brush material of copper-graphite composite and a shunt of copper, or substituting silver for copper as an alternative, is made through a hot isostatic pressing (HIP). The HIP process includes applying high pressure and temperature simultaneously at the brush to shunt interface, after it has been isolated or canned in a metal casing in which the air adjacent to the interface has been evacuated and the interfacial area has been sealed before the application of pressure and temperature.

  17. Turbine blade and non-integral platform with pin attachment

    DOE Patents [OSTI]

    Campbell, Christian X; Eng, Darryl; Marra, John J

    2015-01-27

    Platforms (36, 38) span between turbine blades (23, 24, 25) on a disk (32). Each platform may be individually mounted to the disk by a pin attachment (42). Each platform (36) may have a rotationally rearward edge portion (50) that underlies a forward portion (45) of the adjacent platform (38). This limits centrifugal bending of the rearward portion of the platform, and provides coolant sealing. The rotationally forward edge (44A, 44B) of the platform overlies a seal element (51) on the pressure side (28) of the forwardly adjacent blade, and does not underlie a shelf on that blade. The pin attachment allows radial mounting of each platform onto the disk via tilting (60) of the platform during mounting to provide mounting clearance for the rotationally rearward edge portion (50). This facilitates quick platform replacement without blade removal.

  18. SEC L_Attach G_Key Personnel Cost Sheet

    National Nuclear Security Administration (NNSA)

    L, Attachment G - Management Team Cost Sheet Definitions of items to be included in the worksheet Name Title Key Personnel (Y/N) Reimbursable Annual Base Salary Reimbursable Incentive Pay and bonuses Reimbursable Deferred compensation Reimbursable Employer contributions to Employee Stock Ownership Plans (ESOPs) Reimbursable Employer Contributions to Defined Contribution Pension Plans Current Annual Base Salary Current Total Annual Compensation An ESOP is a stock bonus plan designed to invest

  19. Removable, hermetically-sealing, filter attachment system for hostile environments

    DOE Patents [OSTI]

    Mayfield, Glenn L [Richland, WA

    1983-01-01

    A removable and reusable filter attachment system. A filter medium is fixed o, and surrounded by, a filter frame having a coaxial, longitudinally extending, annular rim. The rim engages an annular groove which surrounds the opening of a filter housing. The annular groove contains a fusible material and a heating mechanism for melting the fusible material. Upon resolidifying, the fusible material forms a hermetic bond with the rim and groove. Remelting allows detachment and replacement of the filter frame.

  20. PART III … LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

    National Nuclear Security Administration (NNSA)

    Page 130 PART III - LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS SECTION J LIST OF APPENDICES - TABLE OF CONTENTS Appendix A Statement of Work Appendix B Award Fee Plan Appendix C Transition Plan Appendix D Sensitive Foreign Nations Control Appendix E Performance Guarantee Agreement(s) Appendix F List of Applicable Directives Appendix G Personnel Appendix Appendix H Key Personnel Appendix I Small Business Subcontracting Plan Appendix J Diversity Plan Guidance Appendix K Program Management

  1. DE-SOL-0008449 Attachment L-7c

    National Nuclear Security Administration (NNSA)

    DE-SOL-0008449 Attachment L-7c [Type here] VIETNAM MOBILIZATION PLAN DE-SOL-0008449 1.0 INTRODUCTION Based on the information presented below, the Statement of Work requirements relating to in- country deployments, and the Work Breakdown Structure (WBS) provided in Table 1, the Offeror shall develop a mobilization plan that describes its approach to a comprehensive Nuclear Smuggling Detection and Deterrence (NSDD) deployment involving Port of Cat Lai seaport in Vietnam. 2.0 REQUIREMENTS The

  2. Microsoft Word - Attachment B - Reporting Requirements.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DE-SOL-0003339 J.1 ATTACHMENT B - REPORTING REQUIREMENTS REPORTING REQUIREMENTS CHECKLIST 1. AWARDEE: 2. IDENTIFICATION NUMBER: REPORT SUBMISSION: Reports shall be submitted to the electronic addresses indicated in the NETL-identified distribution list provided in the post award debriefing. Electronic copies of each report must be submitted to the Contract Specialist (CS) and Contracting Officer's Representative (COR). 4. PLANNING AND REPORTING REQUIREMENTS FORM NO. FREQ. NO. OF COPIES FORM NO.

  3. Pin and roller attachment system for ceramic blades

    DOE Patents [OSTI]

    Shaffer, James E. (Maitland, FL)

    1995-01-01

    In a turbine, a plurality of blades are attached to a turbine wheel by way of a plurality of joints which form a rolling contact between the blades and the turbine wheel. Each joint includes a pin and a pair of rollers to provide rolling contact between the pin and an adjacent pair of blades. Because of this rolling contact, high stress scuffing between the blades and the turbine wheel reduced, thereby inhibiting catastrophic failure of the blade joints.

  4. Pin and roller attachment system for ceramic blades

    DOE Patents [OSTI]

    Shaffer, J.E.

    1995-07-25

    In a turbine, a plurality of blades are attached to a turbine wheel by way of a plurality of joints which form a rolling contact between the blades and the turbine wheel. Each joint includes a pin and a pair of rollers to provide rolling contact between the pin and an adjacent pair of blades. Because of this rolling contact, high stress scuffing between the blades and the turbine wheel reduced, thereby inhibiting catastrophic failure of the blade joints. 3 figs.

  5. Consent Order Update

    Broader source: Energy.gov [DOE]

    At the September 24, 2014 Board meeting Pete Maggiore DOE, Provided Information on the Consent Order Work that Needs to be Completed. Information on the Fiscal Year Work Plan was also Provided.

  6. Atomistic Insights Into the Oriented Attachment of Tunnel-Based Oxide Nanostructures

    SciTech Connect (OSTI)

    Yuan, Yifei; Wood, Stephen M; He, Kun; Yao, Wentao; Tompsett, David; Lu, Jun; Nie, Anmin; Islam, M. Saiful; Shahbazian-Yassar, Reza

    2016-01-01

    Controlled synthesis of nanomaterials is one of the grand challenges facing materials scientists. In particular, how tunnel-based nanomaterials aggregate during synthesis while maintaining their well-aligned tunneled structure is not fully understood. Here, we describe the atomistic mechanism of oriented attachment (OA) during solution synthesis of tunneled α-MnO2 nanowires based on a combination of in situ liquid cell transmission electron microscopy (TEM), aberration-corrected scanning TEM with subangstrom spatial resolution, and first-principles calculations. It is found that primary tunnels (1 × 1 and 2 × 2) attach along their common {110} lateral surfaces to form interfaces corresponding to 2 × 3 tunnels that facilitate their short-range ordering. The OA growth of α-MnO2 nanowires is driven by the stability gained from elimination of {110} surfaces and saturation of Mn atoms at {110}-edges. During this process, extra [MnOx] radicals in solution link the two adjacent {110} surfaces and bond with the unsaturated Mn atoms from both surface edges to produce stable nanowire interfaces. Our results provide insights into the controlled synthesis and design of nanomaterials in which tunneled structures can be tailored for use in catalysis, ion exchange, and energy storage applications.

  7. Low-resistivity photon-transparent window attached to photo-sensitive silicon detector

    DOE Patents [OSTI]

    Holland, Stephen Edward

    2000-02-15

    The invention comprises a combination of a low resistivity, or electrically conducting, silicon layer that is transparent to long or short wavelength photons and is attached to the backside of a photon-sensitive layer of silicon, such as a silicon wafer or chip. The window is applied to photon sensitive silicon devices such as photodiodes, charge-coupled devices, active pixel sensors, low-energy x-ray sensors and other radiation detectors. The silicon window is applied to the back side of a photosensitive silicon wafer or chip so that photons can illuminate the device from the backside without interference from the circuit printed on the frontside. A voltage sufficient to fully deplete the high-resistivity photosensitive silicon volume of charge carriers is applied between the low-resistivity back window and the front, patterned, side of the device. This allows photon-induced charge created at the backside to reach the front side of the device and to be processed by any circuitry attached to the front side. Using the inventive combination, the photon sensitive silicon layer does not need to be thinned beyond standard fabrication methods in order to achieve full charge-depletion in the silicon volume. In one embodiment, the inventive backside window is applied to high resistivity silicon to allow backside illumination while maintaining charge isolation in CCD pixels.

  8. Microsoft Word - ARRAGuideAttachment10v1.doc | Department of Energy

    Energy Savers [EERE]

    ARRAGuideAttachment10v1.doc Microsoft Word - ARRAGuideAttachment10v1.doc More Documents & Publications Microsoft Word - ARRAAttachment12v1.doc Microsoft Word - DRAFT CRB Interview Guidance

  9. Attached is Policy Flash 2013-34 Department of Energy Acquisition...

    Broader source: Energy.gov (indexed) [DOE]

    Attached is Policy Flash 2013-34 Department of Energy Acquisition Letter 2013-04 on Executive Compensation The information attached to this policy flash may be superseded at a...

  10. PolFlash10-31_attach1.pdf | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    PolFlash10-31attach1.pdf More Documents & Publications PolFlash10-31.pdf PolFlash10-31attach2.pdf Initial Application for FAC-C, Purchasing, Financial Assistance and Property...

  11. Attached is Policy Flash 2013-43 DOE F 4220.2 Small Business...

    Office of Environmental Management (EM)

    43 DOE F 4220.2 Small Business Review Form Attached is Policy Flash 2013-43 DOE F 4220.2 Small Business Review Form Attached is Policy Flash 2013-43 DOE F 4220.2 Small Business...

  12. Attachment A: Modeling in Support of Additional Two-Unit Operating

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Configurations | Department of Energy Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations Docket No. EO-05-01: Attachment to the Operating Plan of Mirant Potomac River, LLC PDF icon Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations More Documents & Publications Mirant Potomac, Alexandria, Virginia: Maximum Impacts Predicted by AERMOD-PRIME Mirant

  13. EECBG 10-07C/SEP 10-006B Attachment 1: Process Metrics List |

    Energy Savers [EERE]

    Department of Energy 10-07C/SEP 10-006B Attachment 1: Process Metrics List EECBG 10-07C/SEP 10-006B Attachment 1: Process Metrics List PDF icon eecbg_sep_reporting_guidance_attachment_06242011.pdf More Documents & Publications EECBG SEP Attachment 1 - Process metric list EECBG Program Notice 10-07A DOE Recovery Act Reporting Requirements for the State Energy Program

  14. AttachmentFlash_2010-22(1).pdf | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    22(1).pdf AttachmentFlash2010-22(1).pdf PDF icon AttachmentFlash2010-22(1).pdf More Documents & Publications Policy Flash 2016-10 fac2001-27.pdf AttachmentFlash2010-55.pdf...

  15. Attachment P … Listing of SWMUs and AOCs

    Office of Environmental Management (EM)

    LISTING OF SWMUS AND AOCS Los Alamos National Laboratory Hazardous Waste Permit February2014 Table K-1 SWMUs and AOCs Requiring Corrective Action Attachment K Page 2 Los Alamos National Laboratory Hazardous Waste Permit February 2014 Table K-1 SWMUs and AOCs Requiring Corrective Action SWMU/AOC Unit # Unit Type TA-0 SWMU 00-001 Sediment traps in Mortandad Canyon SWMU 00-011(a) Former Mortar impact area SWMU 00-011(c) Mortar impact area SWMU 00-011(d) Mortar impact area SWMU 00-011(e) Mortar

  16. PART III -LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    J-6-1 Attachment J-6 -- Government-Furnished Property (GFP) Inventory Identifier Official Name Manufacturer Model Site Stlv1 Stlv2 WC45089 BOOTH INDUSTRIAL ACOUSTIC BOOTH RCHN 1979SNYDER 142 WC54531 EXAM TABLE MIDMARK 411 200W 2719WB W23 WC54532 EXAM TABLE MIDMARK 411 200W 2719WB W24 WC54533 EXAM TABLE MIDMARK 411 RCHN 1979SNYDER 112 WC54534 EXAM TABLE MIDMARK 411 200W 2719WB W25 WC54535 EXAM TABLE MIDMARK 411 RCHN 1979SNYDER 125 WC54536 EXAM TABLE MIDMARK 411 RCHN 1979SNYDER 123 WC54537 EXAM

  17. River Corridor Closure Contract Section J, Attachment J-10

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 Contract No. DE-AC06-05RL14655 A000 1 SECTION J, ATTACHMENT J-10 RCC SUBCONTRACTS EXISTING AT TIME OF SOLICITATION The following subcontracts are/were available for assignment to the Contractor at the time Solicitation No. DE-RP06-04RL14655 was issued: End Date Current Value Description Supplier 02/28/05 $ 5,994,091 100 B/C AREA PIPELINES RCI ENVIRONMENTAL, INC. 10/31/06 $ 1,324,615 100-BC BURIAL GROUNDS AND REMAINING SITES FEDERAL ENGINEERS & CONSTRUCTORS 12/31/05 $ 3,400,000 116-N-1 CRIB

  18. River Corridor Closure Contract Section J, Attachment J-11

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 Contract No. DE-AC06-05RL14655 Modification 398 1 SECTION J, ATTACHMENT J-11 RCC FUNDING PROFILE In accordance with the Section B clause entitled Changes to Target Cost, Target Fee, and Schedule, the following is the projected funding profile for this Contract: Fiscal Year Annual Budget Authority ($1M)* Cumulative Budget Authority ($1M)* 2005** $ 107** $ 107 2006 183 290 2007 212 502 2008 232 734 2009 242 976 2010 297 1,273 2011 376 1,649 2012 302 1,951 2013 300 2,251 2014 280 2,531 2015 201

  19. River Corridor Closure Contract Section J, Attachment J-4

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 Contract No. DE-AC06-05RL14655 A000 SECTION J, ATTACHMENT J-4 SMALL BUSINESS SUBCONTRACTING PLAN The Washington Closure LLC Small Business Subcontracting Plan is on file at the Richland Operations Office and will be available at www.hanford.gov/rl The Washington Smalll Business Subcontracting Goals are as follows (as a percent of total subcontracting effort): Small Business (SB): 65.0% Small Disadvantaged Business: 22.0% Women-Owned SB: 13.0% HUBZone SB: 4.5% Veteran-Owned SB: 3.0%

  20. River Corridor Closure Contract Section J, Attachment J-5

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 Contract No. DE-AC06-05RL14655 A000 1 SECTION J, ATTACHMENT J-5 SMALL DISADVANTAGED BUSINESS PARTICIPATION PROGRAM TARGETS (A) Washington Closure NAICS Code Description of NAICS Major Group SDB Dollars Percentage** Subtotal (B) Subcontractors NAICS Code Description of NAICS Major Group SDB Dollars Percentage** 238 Specialty Trade Contractors 37,352,000 1.92 423 Merchant Wholesalers, Durable Goods* 43,104,000 2.21 541 Professional, scientific, & tech srvcs* 13,931,000 0.72 562 Waste mgt

  1. Section L - Attachment D - Past-Performance Information Form

    National Nuclear Security Administration (NNSA)

    E, Page 1 SECTION L ATTACHMENT E PAST PERFORMANCE INFORMATION FORM 1. Complete Name of Offeror or Team Member 2. Contract Title and Location 3. Customer Name, Current Address, Telephone Number and E-mail 4. Contract Number and Type of Contract 5. Date of Contract Award 6. Date Work Commenced 7. Date the Work was Completed 8. Initial Contract Price /Estimated Cost and Fee 9. Final Amount Invoiced/Amount Invoiced to Date 10a. Technical Point of Contact (see instruction below) 10b. Contracting

  2. Attachment L-2a Relevant Corporate Experience Form

    National Nuclear Security Administration (NNSA)

    [Submit in Volume II, TAB 1] DE-SOL-0008449 Attachment L-2a Relevant Corporate Experience Form 1) Experience Submission Number: (Start with 1 and number consecutively) 2). Name and Address of Offeror or Team Member 3. Complete Name/Title of Contract and Location/Address of project/contract 3. Project Owner Name and Address 4. Contract Number and Type of Contract 5. Date of Contract Award 6. Date Work Commenced 7. Date Work Ended 8. Initial Contract Price/Cost and Fee 9. Final Amount

  3. Order 13287, Preserve America

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    14 In response to requirements of Executive Order 13287, Preserve America Office of History and Heritage Resources Office of the Executive Secretariat U.S. Department of Energy September 2014 An Assessment of Historic Properties and Preservation Activities at the U.S. Department of Energy Table of Contents Introduction ............................................................................................................................................ 3 Part I. Background and Overview

  4. Nevada Test Site Environmental Report 2008 Attachment A: Site Description

    SciTech Connect (OSTI)

    Cathy A. Wills

    2009-09-01

    This attachment expands on the general description of the Nevada Test Site (NTS) presented in the Introduction to the Nevada Test Site Environmental Report 2008 (National Security Technologies, LLC [NSTec], 2009a). Included are subsections that summarize the sites geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the sites environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  5. Nevada Test Site Environmental Report 2009, Attachment A: Site Description

    SciTech Connect (OSTI)

    Cathy Wills, ed.

    2010-09-13

    This attachment expands on the general description of the Nevada Test Site (NTS) presented in the Introduction to the Nevada Test Site Environmental Report 2009. Included are subsections that summarize the sites geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the sites environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  6. Predicting Envelope Leakage in Attached Dwellings (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-11-01

    The most common method of measuring air leakage is to perform single (or solo) blower door pressurization and/or depressurization test. In detached housing, the single blower door test measures leakage to the outside. In attached housing, however, this "solo" test method measures both air leakage to the outside and air leakage between adjacent units through common surfaces. Although minimizing leakage to neighboring units is highly recommended to avoid indoor air quality issues between units, reduce pressure differentials between units, and control stack effect, the energy benefits of air sealing can be significantly overpredicted if the solo air leakage number is used in the energy analysis. Guarded blower door testing is more appropriate for isolating and measuring leakage to the outside in attached housing. This method uses multiple blower doors to depressurize adjacent spaces to the same level as the unit being tested. Maintaining a neutral pressure across common walls, ceilings, and floors acts as a "guard" against air leakage between units. The resulting measured air leakage in the test unit is only air leakage to the outside. Although preferred for assessing energy impacts, the challenges of performing guarded testing can be daunting.

  7. Cladding Attachment Over Thick Exterior Insulating Sheathing (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-11-01

    The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of wood-framed walls and mass masonry wall assemblies. The location of the insulation on the exterior of the structure has many direct benefits, including better effective R-value from reduced thermal bridging, better condensation resistance, reduced thermal stress on the structure, as well as other commonly associated improvements such as increased airtightness and improved water management. For thick layers of exterior insulation (more than 1.5 in.), the use of wood furring strips attached through the insulation back to the structure has been used by many contractors and designers as a means to provide a convenient cladding attachment location. Although the approach has proven effective, there is significant resistance to its widespread implementation due to a lack of research and understanding of the mechanisms involved in the development of the vertical displacement resistance capacity. In addition, the long-term in-service performance of the system has been questioned due to potential creep effects of the assembly under the sustained dead load of the cladding and effects of varying environmental conditions. In addition, the current International Building Code (IBC) and International Residential Code (IRC) do not have a provision that specifically allows this assembly.

  8. DE-EM-0001971 WIPP M&O J-22 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    22 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT E: PERFORMANCE GUARANTEE AGREEMENT (Performance Guarantee Agreements dated, August 17, 2012 is hereby incorporated

  9. NMED Consent Order

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    begins environmental sampling in townsite September 25, 2008 Vicinity of Upper LA Canyon Investigated as Part of NMED Consent Order LOS ALAMOS, New Mexico, September 25, 2008-Environmental sampling, conducted on behalf of Los Alamos National Laboratory in the town of Los Alamos near upper Los Alamos Canyon, has begun. Known as the Upper Los Alamos Canyon Project, this effort is an environmental assessment of areas that have been or could have been affected by Laboratory operations from the days

  10. DOE Order 484.1, Reimbursable Work for the Department of Homeland Security

    Office of Environmental Management (EM)

    Change | Department of Energy Order 484.1, Reimbursable Work for the Department of Homeland Security Change DOE Order 484.1, Reimbursable Work for the Department of Homeland Security Change The purpose of this Flash is to inform contracting personnel that the department issued an administrative change to DOE Order 484.1, Reimbursable Work for the Department of Homeland Security. The changes update organizational names and references. Attached is a summary of the change with the updated

  11. DOE Order 412.1a, Work Authorization System Administrative Change

    Broader source: Energy.gov [DOE]

    "The purpose of this Flash is to inform contracting personnel the department issued an administrative change to DOE Order 412.1a, Work Authorization System. The changes update organizational names, references, websites, etc. Attached is a summary of the change with the updated order. Additionally, the order may be found at: https://www.directives.doe.gov/directives-documents/0412.1-BOrder-A-admchg1"

  12. Microsoft Word - Policy Flash 2010-77 Attachment

    Broader source: Energy.gov (indexed) [DOE]

    to the Federal Supply Schedule contractor); and * The following statement: This order is placed under written authorization from dated...

  13. A possible oriented attachment growth mechanism for silver nanowire formation

    SciTech Connect (OSTI)

    Murph, Simona E. Hunyadi; Murphy, Catherine J.; Leach, Austin; Gall, Kenneth

    2015-04-06

    Electron microscopy studies suggest that silver nanowires prepared by an approach reported earlier by us (Caswell, K. K., Bender, C. M., Murphy, C. J. Nano Lett.,2003, 3, 667–669) form through a coarsening process via an oriented attachment mechanism. Initially, silver nucleation centers were produced by chemical reduction of silver ions in boiling water, with sodium citrate and sodium hydroxide as additives in solution. These nucleation centers, with a twinned crystallographic orientation, ultimately merge into fully grown silver nanowires. This is a completely different mechanism from the seed-mediated growth approach, which has also been used to produce silver nanowires. Furthermore, companion molecular dynamics performed with the embedded atom method are in agreement with our experimental data.

  14. Microsoft Word - Attachment J.9, Appendix I Directives

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Part III, Section J, Appendix I J-I-1 ATTACHMENT J.9 APPENDIX I DOE DIRECTIVES/LIST B Applicable to the Operation of AMES Laboratory Contract No. DE-AC02-07CH11358 Contract No. DE-AC02-07CH11358 Contract Modification No. 0192 Part III, Section J, Appendix I NUMBER DATE TITLE J-I-2 O 130.1 09/29/95 Budget Formulation Process O 142.3A 10/14/10 Unclassified Foreign Visits and Assignments Program O 150.1A 03/31/14 Continuity Programs O 151.1C 11/02/05 Comprehensive Emergency Management System O

  15. A possible oriented attachment growth mechanism for silver nanowire formation

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Murph, Simona E. Hunyadi; Murphy, Catherine J.; Leach, Austin; Gall, Kenneth

    2015-04-06

    Electron microscopy studies suggest that silver nanowires prepared by an approach reported earlier by us (Caswell, K. K., Bender, C. M., Murphy, C. J. Nano Lett.,2003, 3, 667–669) form through a coarsening process via an oriented attachment mechanism. Initially, silver nucleation centers were produced by chemical reduction of silver ions in boiling water, with sodium citrate and sodium hydroxide as additives in solution. These nucleation centers, with a twinned crystallographic orientation, ultimately merge into fully grown silver nanowires. This is a completely different mechanism from the seed-mediated growth approach, which has also been used to produce silver nanowires. Furthermore, companionmore » molecular dynamics performed with the embedded atom method are in agreement with our experimental data.« less

  16. EMP Attachment 3 DOE-SC PNNL Site Dose Assessment Guidance

    SciTech Connect (OSTI)

    Snyder, Sandra F.

    2011-12-21

    This Dose Assessment Guidance (DAG) describes methods to use to determine the Maximally-Exposed Individual (MEI) location and to estimate dose impact to that individual under the U.S. Department of Energy Office of Science (DOE-SC) Pacific Northwest National Laboratory (PNNL) Site Environmental Monitoring Plan (EMP). This guidance applies to public dose from radioactive material releases to the air from PNNL Site operations. This document is an attachment to the Pacific Northwest National Laboratory (PNNL) Environmental Monitoring Plan (EMP) and describes dose assessment guidance for radiological air emissions. The impact of radiological air emissions from the U.S. Department of Energy Office of Science (DOE-SC) PNNL Site is indicated by dose estimates to a maximally exposed member of the public, referred to as the maximally exposed individual (MEI). Reporting requirements associated with dose to members of the public from radiological air emissions are in 40 CFR Part 61.94, WAC 246-247-080, and DOE Order 458.1. The DOE Order and state standards for dose from radioactive air emissions are consistent with U.S. Environmental Protection Agency (EPA) dose standards in 40 CFR 61.92 (i.e., 10 mrem/yr to a MEI). Despite the fact that the current Contract Requirements Document (CRD) for the DOE-SC PNNL Site operations does not include the requirement to meet DOE CRD 458.1, paragraph 2.b, public dose limits, the DOE dose limits would be met when EPA limits are met.

  17. Attachment 2: Solicitation for Offers with New and Revised Green Lease Text

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy 2: Solicitation for Offers with New and Revised Green Lease Text Attachment 2: Solicitation for Offers with New and Revised Green Lease Text PDF icon Solicitation for Offers Paragraphs with New and Revised Green Lease Text More Documents & Publications Attachment 1: Green Lease Policies and Procedures for Lease Acquisition Attachment 4: Unrevised SFO Paragraphs Reissued Green Lease Policies and Procedures for Lease Acquisition

  18. DE-EM-0001971 WIPP M&O J-i PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    i PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J LIST OF ATTACHMENTS Table of Content ATTACHMENT A: LAWS, REGULATIONS, AND DIRECTIVES (DEC 2000) ............ 1 ATTACHMENT B: SMALL, SMALL DISADVANTAGED, AND WOMEN-OWNED SMALL BUSINESS SUBCONTRACTING PLAN ......................... 7 ATTACHMENT C: DRAFT PERFORMANCE EVALUATION AND MEASUREMENT PLAN (PEMP) .............................................................................. 8 ATTACHMENT D: SPECIAL FINANCIAL INSTITUTION

  19. Attachment A: AIP Program Principles (Questions and Answers 1-12)

    Broader source: Energy.gov [DOE]

    This attachment contains twelve questions and answers that designate the mandatory AIP provisions that shall be included in new and renegotiated agreements and discusses the principles underlying...

  20. Attachment 5 Volume II Pricing Matrix.xls | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Attachment 5 Volume II Pricing Matrix.xls&0; More Documents & Publications Microsoft Word - FY07AnnualReport.doc CX-005455: Categorical Exclusion Determination Microsoft Word -...

  1. DOE/RL-92-36, Hanford Site Hoisting and Rigging Manual ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ATTACHMENTS February 28, 2012 Rev 1 Page 31 ATTACHMENT 2 Lifting Requirements for Concrete Blocks DOE/RL-92-36, Hanford Site Hoisting and Rigging Manual ATTACHMENTS February 28, 2012 Rev 1 Page 32 This page intentionally left blank. DOE/RL-92-36, Hanford Site Hoisting and Rigging Manual ATTACHMENTS May 2, 2013 Rev 1 Page 33 Lifting Requirements for Concrete Blocks Concrete Blocks (i.e., Ecology, Landscaping Blocks) stacked more than two high shall be evaluated for structural stability. Lifting

  2. T-534: Vulnerability in the PDF distiller of the BlackBerry Attachment...

    Broader source: Energy.gov (indexed) [DOE]

    PROBLEM: Vulnerability in the PDF distiller of the BlackBerry Attachment Service for the BlackBerry Enterprise Server. PLATFORM: * BlackBerry Enterprise Server Express version...

  3. Microsoft Word - Attachment 1 DICCE2 Statement of Work

    National Nuclear Security Administration (NNSA)

    ... The Web-Based Reporting System shall have the capacity to contain all documents, including task orders, proposals, reporting requirements and other documents related to task...

  4. Nevada Test Site Environmental Report 2007 Attachment A: Site Description

    SciTech Connect (OSTI)

    Cathy Wills

    2008-09-01

    This appendix expands on the general description of the Nevada Test Site (NTS) presented in the Introduction to the Nevada Test Site Environmental Report 2007 (U.S. Department of Energy [DOE], 2008). Included are subsections that summarize the site's geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the site's environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site which afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  5. Porous expandable device for attachment to bone tissue

    DOE Patents [OSTI]

    Rybicki, Edmund F.; Wheeler, Kenneth Ray; Hulbert, Lewis E.; Karagianes, Manuel Tom; Hassler, Craig R.

    1977-01-01

    A device for attaching to substantially solid living bone tissue, comprising a body member having an outer surface shaped to fit approximately into an empty space in the tissue and having pores into which the tissue can grow to strengthen the bond between the device and the tissue, and adjustable means for expanding the body member against the tissue to an extent such as to provide a compressive stress capable of maintaining a snug and stable fit and of enhancing the growth of the tissue into the pores in the body member. The expanding means is adjustable to provide a stress between the tissue and the body member in the range of about 150 to 750 psi, typically 150 to 350 psi. Typically the body member comprises an expandable cylindrical portion having at least one radial slit extending longitudinally from a first end to the vicinity of the opposite (second) end thereof, at least one radial slit extending longitudinally from the second end to the vicinity of the first end thereof, and a tapered cylindrical hole extending coaxially from a wider circular opening in the first end to a narrower circular opening communicating with the second end.

  6. Attachment method for stacked integrated circuit (IC) chips

    DOE Patents [OSTI]

    Bernhardt, Anthony F. (Berkeley, CA); Malba, Vincent (Livermore, CA)

    1999-01-01

    An attachment method for stacked integrated circuit (IC) chips. The method involves connecting stacked chips, such as DRAM memory chips, to each other and/or to a circuit board. Pads on the individual chips are rerouted to form pads on the side of the chip, after which the chips are stacked on top of each other whereby desired interconnections to other chips or a circuit board can be accomplished via the side-located pads. The pads on the side of a chip are connected to metal lines on a flexible plastic tape (flex) by anisotropically conductive adhesive (ACA). Metal lines on the flex are likewise connected to other pads on chips and/or to pads on a circuit board. In the case of a stack of DRAM chips, pads to corresponding address lines on the various chips may be connected to the same metal line on the flex to form an address bus. This method has the advantage of reducing the number of connections required to be made to the circuit board due to bussing; the flex can accommodate dimensional variation in the alignment of chips in the stack; bonding of the ACA is accomplished at low temperature and is otherwise simpler and less expensive than solder bonding; chips can be bonded to the ACA all at once if the sides of the chips are substantially coplanar, as in the case for stacks of identical chips, such as DRAM.

  7. Attachment method for stacked integrated circuit (IC) chips

    DOE Patents [OSTI]

    Bernhardt, A.F.; Malba, V.

    1999-08-03

    An attachment method for stacked integrated circuit (IC) chips is disclosed. The method involves connecting stacked chips, such as DRAM memory chips, to each other and/or to a circuit board. Pads on the individual chips are rerouted to form pads on the side of the chip, after which the chips are stacked on top of each other whereby desired interconnections to other chips or a circuit board can be accomplished via the side-located pads. The pads on the side of a chip are connected to metal lines on a flexible plastic tape (flex) by anisotropically conductive adhesive (ACA). Metal lines on the flex are likewise connected to other pads on chips and/or to pads on a circuit board. In the case of a stack of DRAM chips, pads to corresponding address lines on the various chips may be connected to the same metal line on the flex to form an address bus. This method has the advantage of reducing the number of connections required to be made to the circuit board due to bussing; the flex can accommodate dimensional variation in the alignment of chips in the stack; bonding of the ACA is accomplished at low temperature and is otherwise simpler and less expensive than solder bonding; chips can be bonded to the ACA all at once if the sides of the chips are substantially coplanar, as in the case for stacks of identical chips, such as DRAM. 12 figs.

  8. Expert Meeting Report: Cladding Attachment Over Exterior Insulation (BSC Report)

    SciTech Connect (OSTI)

    2013-10-01

    The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of both wood framed walls as well as mass masonry wall assemblies. The location of the insulation to the exterior of the structure has many direct benefits including better effective R-value from reduced thermal bridging, better condensation resistance, reduced thermal stress on the structure, as well as other commonly associated improvements such as increased air tightness and improved water management (Hutcheon 1964, Lstiburek 2007). The intent of the meeting was to review the current state of industry knowledge regarding cladding attachment over exterior insulation with a specific focus on: 1. Gravity load resistance, 2. Wind load resistance. The presentations explore these topics from an engineering design, laboratory testing, field monitoring, as well as practical construction perspective. By bringing various groups together (who have been conduction research or have experience in this area), a more holistic review of the design limits and current code language proposals can be completed and additional gaps identified. The results of which will help inform design standards and criteria.

  9. Attaching solar collectors to a structural framework utilizing a flexible clip

    DOE Patents [OSTI]

    Kruse, John S

    2014-03-25

    Methods and apparatuses described herein provide for the attachment of solar collectors to a structural framework in a solar array assembly. A flexible clip is attached to either end of each solar collector and utilized to attach the solar collector to the structural framework. The solar collectors are positioned to allow a member of the framework to engage a pair of flexible clips attached to adjacent solar collectors during assembly of the solar array. Each flexible clip may have multiple frame-engaging portions, each with a flange on one end to cause the flexible clip to deflect inward when engaged by the framework member during assembly and to guide each of the frame-engaging portions into contact with a surface of the framework member for attachment.

  10. DOE - Fossil Energy: Orders-2013

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Order Granting Blanket Authority to Export Natural Gas to Mexico 3366 13-146-NG 121213 Iberdrola Energy Services, LLC Order Granting Blanket Authority to ImportExport Natural ...

  11. Paperclips Etc. Special Order Form

    Broader source: Energy.gov (indexed) [DOE]

    PSS-02.2 (March 7, 2011) Replaces PSS-02.1 PAPERCLIPS Etc. SPECIAL Orders Form This form is used to order supplies that are not readily available in the DOE HQ self-service supply...

  12. Price Quotes and Isotope Ordering

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ordering Price Quotes and Isotope Ordering Isotopes produced at Los Alamos National Laboratory are saving lives, advancing cutting-edge research and keeping the U.S. safe. Isotope...

  13. ORDER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    rack or container with the firing chamber empty. During normal operations, long guns (e.g., rifles, shotguns, submachine guns) must not be carried with a round in the...

  14. Quality Assurance Grading Guidelines for Research and Development at DOE Facilities (DOE Order 5700.6C)

    SciTech Connect (OSTI)

    Powell, T.B.

    1992-01-01

    The quality assurance (QA) requirements for the U.S. Department of Energy (DOE) are established in DOE Order 5700.6C. This order is applicable for all DOE departmental elements, management, and maintenance and operating contractors and requires that documented Quality Assurance Programs (QAPs) are prepared at all levels; it has one attachment. The DOE Office of Energy Research (DOE-ER) has issued a standard to ensure implementation of the full intent of this order in the ER community.

  15. Methods for attaching polymerizable ceragenins to water treatment membranes using amine and amide linkages

    DOE Patents [OSTI]

    Hibbs, Michael; Altman, Susan J.; Jones, Howland D.T.; Savage, Paul B.

    2013-10-15

    This invention relates to methods for chemically grafting and attaching ceragenin molecules to polymer substrates; methods for synthesizing ceragenin-containing copolymers; methods for making ceragenin-modified water treatment membranes and spacers; and methods of treating contaminated water using ceragenin-modified treatment membranes and spacers. Ceragenins are synthetically produced antimicrobial peptide mimics that display broad-spectrum bactericidal activity. Alkene-functionalized ceragenins (e.g., acrylamide-functionalized ceragenins) can be attached to polyamide reverse osmosis membranes using amine-linking, amide-linking, UV-grafting, or silane-coating methods. In addition, silane-functionalized ceragenins can be directly attached to polymer surfaces that have free hydroxyls.

  16. Methods for attaching polymerizable ceragenins to water treatment membranes using silane linkages

    DOE Patents [OSTI]

    Hibbs, Michael; Altman, Susan J.; Jones, Howland D. T.; Savage, Paul B.

    2013-09-10

    This invention relates to methods for chemically grafting and attaching ceragenin molecules to polymer substrates; methods for synthesizing ceragenin-containing copolymers; methods for making ceragenin-modified water treatment membranes and spacers; and methods of treating contaminated water using ceragenin-modified treatment membranes and spacers. Ceragenins are synthetically produced antimicrobial peptide mimics that display broad-spectrum bactericidal activity. Alkene-functionalized ceragenins (e.g., acrylamide-functionalized ceragenins) can be attached to polyamide reverse osmosis membranes using amine-linking, amide-linking, UV-grafting, or silane-coating methods. In addition, silane-functionalized ceragenins can be directly attached to polymer surfaces that have free hydroxyls.

  17. Microsoft Word - MOD M229 FAR-DEAR Attach 1 - FINAL

    National Nuclear Security Administration (NNSA)

    Modification No. M229 Contract No. DE-AC54-00AL66620 Page No. 2 of 2 The purpose of this Modification is to incorporate the following: A. Replace Part III, LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS, Section J - LIST OF ATTACHMENTS, Appendix A - PERSONNEL APPENDIX in its entirety to update REIMBURSEMENT AUTHORIZATIONS, TABLE OF CONTENTS, and to replace Section II. BENEFITS PROGRAM, B.4.e.(6), B.4.f.(4), and B.4.j.(1)(a)&(b) (See Attachment 1). B. Replace Part III - LIST OF DOCUMENTS,

  18. Remedial action plan and site design for stabilization of the inactive uranium processing site at Naturita, Colorado. Appendix B of Attachment 3: Groundwater hydrology report, Attachment 4: Water resources protection strategy, Final

    SciTech Connect (OSTI)

    Not Available

    1994-03-01

    Attachment 3 Groundwater Hydrology Report describes the hydrogeology, water quality, and water resources at the processing site and Dry Flats disposal site. The Hydrological Services calculations contained in Appendix A of Attachment 3, are presented in a separate report. Attachment 4 Water Resources Protection Strategy describes how the remedial action will be in compliance with the proposed EPA groundwater standards.

  19. DE-EM-0001971 WIPP M&O J-15 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    15 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT D: SPECIAL FINANCIAL INSTITUTION ACCOUNT AGREEMENT FOR USE WITH THE PAYMENTS CLEARED FINANCING ARRANGEMENT DE-EM-0001971 WIPP M&O J-16 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT D SPECIAL FINANCIAL INSTITUTION ACCOUNT AGREEMENT FOR USE WITH THE PAYMENTS CLEARED FINANCING ARRANGEMENT Agreement entered into this, _______ day of ___________, ________, between the UNITED

  20. DE-SOL-0002555 WIPP Solicitation J-23 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT F: GUIDANCE FOR PREPARATION OF DIVERSITY PLAN DE-SOL-0002555 WIPP Solicitation J-24 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT F GUIDANCE FOR PREPARATION OF DIVERSITY PLAN (See Contract Clause entitled "Diversity Plan") This Guidance is to assist the Contractor in understanding the information being sought by the Department for each of the Diversity elements and

  1. Attached is Policy Flash 2013-34 Department of Energy Acquisition Letter 2013-04 on Executive Compensation

    Broader source: Energy.gov [DOE]

    Attached is Policy Flash 2013-34 Department of Energy Acquisition Letter 2013-04 on Executive Compensation

  2. Request for Proposal No. DE-SOL-0008418 SECTION L ATTACHMENT...

    National Nuclear Security Administration (NNSA)

    SECTION L ATTACHMENT H LETTER OF COMMITMENT I, INSERT NAME, hereby certify that the resume submitted with this letter is true and correct. I agree to accept the position of ...

  3. PolFlash10-30_attach2.pdf | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    PolFlash10-30attach2.pdf More Documents & Publications FinancialAssistanceCertification-01.pdf PolFlash10-31.pdf PolFlash10-30.pdf...

  4. The Ductility of Human Jaw Bone Attached to a Tooth | Stanford...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Ductility of Human Jaw Bone Attached to a Tooth Saturday, May 31, 2014 In a bone-tooth fibrous joint, the articulation between harder materials such as the cementum of the...

  5. File:Energy Data Jam - Attachment C.pdf | Open Energy Information

    Open Energy Info (EERE)

    Involved Help Apps Datasets Community Login | Sign Up Search File Edit History File:Energy Data Jam - Attachment C.pdf Jump to: navigation, search File File history File usage...

  6. Attachment L-7a U.S. DEPARTMENT OF ENERGY NATIONAL NUCLEAR SECURITY...

    National Nuclear Security Administration (NNSA)

    ... 2 of 6 U.S. DEPARTMENT OF ENERGY NATIONAL NUCLEAR SECURITY ADMINISTRATION 2 attachment. ... other U.S. Page 3 of 6 U.S. DEPARTMENT OF ENERGY NATIONAL NUCLEAR SECURITY ADMINISTRATION ...

  7. Attachment A: Site Description Nevada National Security Site Environmental Report 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Attachment A: Site Description Nevada National Security Site Environmental Report 2014 ATT-A-i Table of Contents List of Figures ....................................................................................................................................................... A-ii List of Tables ......................................................................................................................................................... A-ii Acronyms and Abbreviations

  8. Apparatus for attaching a cleaning tool to a robotic manipulator (Patent) |

    Office of Scientific and Technical Information (OSTI)

    DOEPatents Apparatus for attaching a cleaning tool to a robotic manipulator Title: Apparatus for attaching a cleaning tool to a robotic manipulator × You are accessing a document from the Department of Energy's (DOE) DOE Patents. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service. Visit OSTI to utilize additional information resources in energy science and technology. This invention is comprised of an apparatus for

  9. Mechanisms of Oriented Attachment of TiO2 Nanocrystals in Vacuum and Humid

    Office of Scientific and Technical Information (OSTI)

    Environments: Reactive Molecular Dynamics (Journal Article) | SciTech Connect Journal Article: Mechanisms of Oriented Attachment of TiO2 Nanocrystals in Vacuum and Humid Environments: Reactive Molecular Dynamics Citation Details In-Document Search Title: Mechanisms of Oriented Attachment of TiO2 Nanocrystals in Vacuum and Humid Environments: Reactive Molecular Dynamics Authors: Raju, Muralikrishna [1] ; Van Duin, Adri C. T. [2] ; Fichthorn, Kristen [1] + Show Author Affiliations Pennsylvania

  10. Vacuum Attachment for Collection of Lithium Powder ---- Inventor(s) Hans

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Schneider and Stephan Jurczynski | Princeton Plasma Physics Lab Vacuum Attachment for Collection of Lithium Powder ---- Inventor(s) Hans Schneider and Stephan Jurczynski The Vacuum Attachment is part of an integrated system designed to collect Lithium (Li) Power for storage in mineral oil or to passivate it in Vinegar or Chilled Water. Major components are: Mister, Li Trap, Oil Trap or Combustion Chamber and Ash rated Shop Vacuum. The Mister provides a fine coating of mineral oil, vinegar or

  11. Microsoft Word - Attachment G1G 10-1-2012.docx

    Office of Environmental Management (EM)

    G1 APPENDIX G TECHNICAL SPECIFICATIONS PANEL CLOSURE SYSTEM WASTE ISOLATION PILOT PLANT CARLSBAD, NEW MEXICO Waste Isolation Pilot Plant Hazardous Waste Permit October 1, 2012 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 1, 2012 PERMIT ATTACHMENT G1G Page G1G-i ATTACHMENT G1 APPENDIX G TECHNICAL SPECIFICATIONS PANEL CLOSURE SYSTEM WASTE ISOLATION PILOT PLANT CARLSBAD, NEW MEXICO TABLE OF CONTENTS DIVISION 1 - GENERAL REQUIREMENTS

  12. Public Order and Safety Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    | Activity Subcategories | Energy Use Public Order and Safety Buildings... Volunteer fire stations tend not to be government owned, which probably explains why 33 percent of...

  13. DOE Order on Quality Assurance

    Broader source: Energy.gov [DOE]

    The purpose of this order is to ensure that Department of Energy (DOE), including National Nuclear Security Administration (NNSA), products and services meet or exceed customers’ requirements and...

  14. Operating Plan of Mirant Potomac River, LLC in Compliance with Order No.

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    202-05-03 | Department of Energy Operating Plan of Mirant Potomac River, LLC in Compliance with Order No. 202-05-03 Operating Plan of Mirant Potomac River, LLC in Compliance with Order No. 202-05-03 Docket No. EO-05-01: Attached is the Operating Plan of Mirant Potomac River, LLC, which is being submitted in compliance with Order No. 202-05-03, issued by the Department of Energy on December 20, 2005, in the captioned proceeding. PDF icon Operating Plan of Mirant Potomac River, LLC in

  15. High-Order/Low-Order methods for ocean modeling

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Newman, Christopher; Womeldorff, Geoff; Chacón, Luis; Knoll, Dana A.

    2015-06-01

    We examine a High Order/Low Order (HOLO) approach for a z-level ocean model and show that the traditional semi-implicit and split-explicit methods, as well as a recent preconditioning strategy, can easily be cast in the framework of HOLO methods. The HOLO formulation admits an implicit-explicit method that is algorithmically scalable and second-order accurate, allowing timesteps much larger than the barotropic time scale. We demonstrate how HOLO approaches, in particular the implicit-explicit method, can provide a solid route for ocean simulation to heterogeneous computing and exascale environments.

  16. ESPC ENABLE Draft Task Order

    Broader source: Energy.gov [DOE]

    Document provides a draft for an agency to use when forming an ESPC ENABLE contract and making a task order award. This draft task order provides the framework for a contract that agencies and energy service companies can tailor to the particular needs of each site or project.

  17. Averen: Order (2010-CW-0711)

    Broader source: Energy.gov [DOE]

    DOE ordered Averen, Inc. to pay a $5,000 civil penalty after finding Averen had failed to certify that certain models of faucets comply with the applicable water conservation standards.

  18. Danco: Order (2015-CW-28006)

    Broader source: Energy.gov [DOE]

    DOE ordered Danco, Inc. to pay a $8,000 civil penalty after finding Danco had failed to certify that certain models of faucets comply with the applicable water conservation standards.

  19. Amerisink: Order (2010-CW-0710)

    Broader source: Energy.gov [DOE]

    DOE ordered Amerisink, Inc. to pay a $5,000 civil penalty after finding Amerisink had failed to certify that certain models of faucets comply with the applicable water conservation standards.

  20. Kohler: Order (2014-CW-30003)

    Broader source: Energy.gov [DOE]

    DOE ordered Kohler Co. to pay a $8,000 civil penalty after finding Kohler had failed to certify that certain models of water closets comply with the applicable water conservation standards.

  1. ETL: Order (2015-CW-29003)

    Broader source: Energy.gov [DOE]

    DOE ordered ETL, LLC to pay a $8,000 civil penalty after finding ETL had failed to certify that certain models of showerheads comply with the applicable water conservation standards.

  2. Quorum: Order (2014-CE-32013)

    Broader source: Energy.gov [DOE]

    DOE ordered Davoil, Inc. d/b/a Quorum International, Inc. to pay a $8,000 civil penalty after finding Quorum had failed to certify that certain models of ceiling fans comply with the applicable energy conservation standards.

  3. Amerikooler: Order (2013-CE-5307)

    Broader source: Energy.gov [DOE]

    DOE ordered Amerikooler, Inc. to pay a $8,000 civil penalty after finding Amerikooler had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  4. Trastar: Order (2013-CE-49003)

    Broader source: Energy.gov [DOE]

    DOE ordered Trastar Inc. to pay a $8,000 civil penalty after finding Trastar had failed to certify that certain basic models of traffic signal modules and pedestrian modules comply with the applicable energy conservation standards.

  5. Almo: Order (2012-CE-1416)

    Broader source: Energy.gov [DOE]

    DOE ordered Almo Corporation to pay a $6,500 civil penalty after finding Almo had failed to certify that certain models of residential refrigerators comply with the applicable energy conservation standards.

  6. Curtis: Order (2015-CE-14021)

    Broader source: Energy.gov [DOE]

    DOE ordered Curtis International, Ltd. to pay a $5,800 civil penalty after finding Curtis had failed to certify that refrigerator-freezer basic model FR9211 complies with the applicable energy conservation standards.

  7. Electrolux: Order (2014-CE-23015)

    Broader source: Energy.gov [DOE]

    DOE ordered Electrolux North America, Inc. to pay a $16,000 civil penalty after finding Electrolux had failed to certify that certain models of cooking products comply with the applicable energy conservation standards.

  8. Sunpentown: Order (2012-CE-1505)

    Broader source: Energy.gov [DOE]

    DOE ordered Sunpentown International Inc. to pay a $12,160 civil penalty after finding Sunpentown had failed to certify that certain models of room air conditioners comply with the applicable energy conservation standards.

  9. Sears: Order (2012-CE-3606)

    Broader source: Energy.gov [DOE]

    DOE ordered Sears, Roebuck & Co. to pay an $8,000 civil penalty after finding Sears had failed to certify that Sears dehumidifiers comply with the applicable energy conservation standard.

  10. Electrolux: Order (2015-CE-14020)

    Broader source: Energy.gov [DOE]

    DOE ordered Electrolux North America, Inc. to pay a $20,000 civil penalty after finding Electrolux had failed to certify that certain models of refrigerator-freezers comply with the applicable energy conservation standards.

  11. Electrolux: Order (2012-CE-1901)

    Broader source: Energy.gov [DOE]

    DOE ordered Electrolux North America to pay a $6,500 civil penalty after finding Electrolux had failed to certify that certain dishwashers comply with the applicable energy conservation standard.

  12. TCP: Order (2011-CE-3501)

    Broader source: Energy.gov [DOE]

    DOE ordered Technical Consumer Products, Inc. to pay a $3,000 civil penalty after finding TCP had failed to certify that a certain model of medium base compact fluorescent lamp (CFL) complies with the applicable energy conservation standards.

  13. Legacy: Order (2015-CE-14025)

    Broader source: Energy.gov [DOE]

    DOE ordered The Legacy Companies to pay a $8,000 civil penalty after finding Legacy had failed to certify that refrigerator Maxx-Ice brand basic model MCR3U complies with the applicable energy conservation standards.

  14. Eurodib: Order (2014-CE-45001)

    Broader source: Energy.gov [DOE]

    DOE ordered Eurodib Inc. to pay a $8,000 civil penalty after finding Eurodib had failed to certify that certain models of automatic commercial ice makers comply with the applicable energy conservation standards.

  15. Winix: Order (2012-CE-3607)

    Broader source: Energy.gov [DOE]

    DOE ordered Cloud 9 Marketing, Inc. d/b/a Winix, Inc., to pay a $8,000 civil penalty after finding Winix had failed to certify that certain models of dehumidifiers comply with the applicable energy conservation standards.

  16. Aircooler: Order (2013-CE-5338)

    Broader source: Energy.gov [DOE]

    DOE ordered Aircooler Corporation to pay a $8,000 civil penalty after finding Aircooler had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  17. Satco: Order (2013-CE-2702)

    Broader source: Energy.gov [DOE]

    DOE ordered Satco Products, Inc. to pay a $8,000 civil penalty after finding Satco had failed to certify that certain models of general service fluorescent lamps comply with the applicable energy conservation standards.

  18. Perlick: Order (2011-SE-1401)

    Broader source: Energy.gov [DOE]

    DOE ordered Perlick Corporation to pay a $400 civil penalty after finding Perlick had manufactured and distributed in commerce in the U.S. at least two noncompliant model HP48RO, electric refrigerators.

  19. Smeg: Order (2014-CE-23003)

    Broader source: Energy.gov [DOE]

    DOE ordered Smeg USA, Inc. to pay a $16,000 civil penalty after finding Smeg had failed to certify that certain models of refrigerators/refrigerator-freezers/freezers, dishwashers, and cooking products comply with the applicable energy conservation standards.

  20. Leotek: Order (2013-CE-4903)

    Broader source: Energy.gov [DOE]

    DOE ordered Leotek Electronics USA Corp. to pay a $8,000 civil penalty after finding Leotek had failed to certify that certain models of traffic signal modules and pedestrian modules comply with the applicable energy conservation standards.

  1. Litex: Order (2014-CE-32011)

    Broader source: Energy.gov [DOE]

    DOE ordered Litex Industries, Limited to pay a $8,000 civil penalty after finding Litex had failed to certify that certain models of ceiling fans comply with the applicable energy conservation standards.

  2. TMP: Order (2013-CE-5334)

    Broader source: Energy.gov [DOE]

    DOE ordered TMP Manufacturing Company, Inc. to pay a $8,000 civil penalty after finding TMP had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  3. Sylvane: Order (2013-CE-36005)

    Broader source: Energy.gov [DOE]

    DOE ordered Sylvane, Inc. to pay a $4,000 civil penalty after finding Sylvane had failed to certify that certain models of dehumidifiers comply with the applicable energy conservation standards.

  4. Northland: Order (2014-CE-23002)

    Broader source: Energy.gov [DOE]

    DOE ordered Northland Corporation d/b/a AGA Marvel to pay a $16,000 civil penalty after finding Northland had failed to certify that certain models of cooking products comply with the applicable energy conservation standards.

  5. Keystone: Order (2013-CE-2601)

    Broader source: Energy.gov [DOE]

    DOE ordered Keystone Technologies, LLC to pay a $8,000 civil penalty after finding Keystone had failed to certify that certain models of fluorescent lamp ballasts comply with the applicable energy conservation standards.

  6. Emerson: Order (2014-CE-54001)

    Broader source: Energy.gov [DOE]

    DOE ordered Emerson Electric Co. to pay a $8,000 civil penalty after finding Emerson had failed to certify that certain models of metal halide lamp fixtures comply with the applicable energy conservation standards.

  7. Perlick: Order (2013-SE-14002)

    Broader source: Energy.gov [DOE]

    DOE ordered Perlick Corporation to pay a $60,725 civil penalty after finding Perlick had manufactured and distributed in commerce in the U.S. 347 units of basic model HP48RR, a noncompliant refrigerator.

  8. Dacor: Order (2014-CE-23010)

    Broader source: Energy.gov [DOE]

    DOE ordered Dacor to pay a $8,000 civil penalty after finding Dacor had failed to certify that certain models of cooking products comply with the applicable energy conservation standards.

  9. Whirlpool: Order (2014-CE-21010)

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE ordered Whirlpool Corporation to pay a $8,000 civil penalty after finding Whirlpool had failed to certify that certain models of residential clothes dryers comply with the applicable energy conservation standards.

  10. DHI: Order (2014-CE-32004)

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE ordered DHI Corp. to pay a $8,000 civil penalty after finding DHI had failed to certify that certain models of ceiling fans comply with the applicable energy conservation standards.

  11. Vaxcel: Order (2014-CE-32006)

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE ordered Vaxcel International Co., Ltd. to pay a $8,000 civil penalty after finding Vaxcel had failed to certify that certain models of ceiling fans comply with the applicable energy conservation standards.

  12. Leer: Order (2013-CE-5325)

    Broader source: Energy.gov [DOE]

    DOE ordered Leer, Inc. to pay a $8,000 civil penalty after finding Leer had failed to certify that certain models of walk-in cooler and freezer (WICF) components comply with the applicable energy conservation standards.

  13. Daewoo: Order (2010-CE-0410)

    Broader source: Energy.gov [DOE]

    DOE ordered Daewoo International, Inc. to pay a $5,000 civil penalty after finding Daewoo had failed to certify that certain models of residential clothes dryers comply with the applicable energy conservation standards.

  14. Simkar: Order (2012-SE-5408)

    Broader source: Energy.gov [DOE]

    DOE ordered Simkar Corporation to pay a $28,193 civil penalty after finding Simkar had manufactured and distributed in commerce in the U.S. 326 units of a variety of noncompliant metal halide lamp fixtures basic models.

  15. LG: Order (2015-CE-14022)

    Broader source: Energy.gov [DOE]

    DOE ordered LG Electronics USA, Inc. to pay a $8,000 civil penalty after finding LG had failed to certify that various refrigerator-freezer basic models comply with the applicable energy conservation standards.

  16. Atosa: Order (2015-CE-42037)

    Broader source: Energy.gov [DOE]

    DOE ordered Atosa Catering Equipment, Inc. to pay a $8,000 civil penalty after finding Atosa had failed to certify that certain models of self-contained commercial refrigeration equipment with doors comply with the applicable energy conservation standards.

  17. Barron: Order (2013-CE-48004)

    Broader source: Energy.gov [DOE]

    DOE ordered Barron Lighting Group, Inc. to pay a $8,000 civil penalty after finding Barron had failed to certify that certain models of illuminated exit signs comply with the applicable energy conservation standards.

  18. Harrington: Order (2014-SW-28011)

    Broader source: Energy.gov [DOE]

    DOE ordered Harrington Brass Works to pay a $10,000 civil penalty after finding Harrington had manufactured and distributed in commerce in the U.S. 832 units of individual model 20-210-026, a noncompliant faucet.

  19. Avanti: Order (2013-CE-2105)

    Broader source: Energy.gov [DOE]

    DOE ordered Avanti Products, LLC to pay a $8,000 civil penalty after finding Avanti had failed to certify that certain models of residential clothes dryers comply with the applicable energy conservation standards.

  20. Acuity: Order (2013-CE-4802)

    Broader source: Energy.gov [DOE]

    DOE ordered Acuity Brands Lighting to pay a $8,000 civil penalty after finding Acuity had failed to certify that certain models of illuminated exit signs comply with the applicable energy conservation standards.

  1. Haier: Order (2011-CE-2104)

    Broader source: Energy.gov [DOE]

    DOE ordered Haier to pay an $20,000 civil penalty after finding Haier had failed to certify that Haier residential clothes dryers comply with the applicable energy conservation standard.

  2. Nicor: Order (2014-CE-32016)

    Broader source: Energy.gov [DOE]

    DOE ordered Nicor, Inc. to pay a $8,000 civil penalty after finding Nicor had failed to certify that certain models of ceiling fans comply with the applicable energy conservation standards.

  3. Hydac: Order (2012-SE-4107)

    Broader source: Energy.gov [DOE]

    DOE ordered Hydac Technology Corporation to pay a $29,000 civil penalty after finding Hydac had manufactured and distributed in commerce in the U.S. noncompliant electric motors.

  4. BSH: Order (2013-CE-2001)

    Broader source: Energy.gov [DOE]

    DOE ordered BSH Home Appliances Corp. to pay a $8,000 civil penalty after finding BSH had failed to certify that certain models of residential clothes washers comply with the applicable energy/water conservation standards.

  5. On the Effect of Ramp Rate in Damage Accumulation of the CPV Die-Attach: Preprint

    SciTech Connect (OSTI)

    Bosco, N. S.; Silverman, T. J.; Kurtz, S. R.

    2012-06-01

    It is commonly understood that thermal cycling at high temperature ramp rates may activate unrepresentative failure mechanisms. Increasing the temperature ramp rate of thermal cycling, however, could dramatically reduce the test time required to achieve an equivalent amount of thermal fatigue damage, thereby reducing overall test time. Therefore, the effect of temperature ramp rate on physical damage in the CPV die-attach is investigated. Finite Element Model (FEM) simulations of thermal fatigue and thermal cycling experiments are made to determine if the amount of damage calculated results in a corresponding amount of physical damage measured to the die-attach for a variety of fast temperature ramp rates. Preliminary experimental results are in good agreement with simulations and reinforce the potential of increasing temperature ramp rates. Characterization of the microstructure and resulting fatigue crack in the die-attach suggest a similar failure mechanism across all ramp rates tested.

  6. Practical use of a carbon nanotube attached to a blunt apex in an atomic force microscope

    SciTech Connect (OSTI)

    Kuwahara, Masashi; Abe, Hidekazu; Tokumoto, Hiroshi; Shima, Takayuki; Tominaga, Junji; Fukuda, Hajime

    2004-03-15

    A carbon nanotube (CNT) was successfully attached to a base probe with a blunt apex and subsequently used as a probe for an atomic force microscope (AFM). This setup demonstrates high spatial resolution properties, plus an advantage: we were able to readily identify the loss of the CNT from the end of the probe by the resultant sudden drop in resolution. This design of probe is expected to feature yet another advantage: that of relative immunity to accidental collision compared to a CNT attached to a commercially available sharp tip. We also discuss the problems specific to CNT-attached probes, which are carbon contamination of the sample surface and artifact images formed at the edge of pit structures. We demonstrate that carbon contamination can be suppressed by a rubbing procedure before the scanning use, and that pit artifacts can be eliminated by optimizing the CNT length.

  7. Electron attachment to C{sub 2} fluorocarbon radicals at high temperature

    SciTech Connect (OSTI)

    Shuman, Nicholas S.; Miller, Thomas M.; Viggiano, Albert A.

    2013-11-14

    Thermal electron attachment to the radical species C{sub 2}F{sub 3} and C{sub 2}F{sub 5} has been studied over the temperature range 300–890 K using the Variable Electron and Neutral Density Attachment Mass Spectrometry technique. Both radicals exclusively undergo dissociative attachment to yield F{sup −}. The rate constant for C{sub 2}F{sub 5} shows little dependence over the temperature range, remaining ∼4 × 10{sup −9} cm{sup 3} s{sup −1}. The rate constant for C{sub 2}F{sub 3} attachment rises steeply with temperature from 3 × 10{sup −11} cm{sup 3} s{sup −1} at 300 K to 1 × 10{sup −9} cm{sup 3} s{sup −1} at 890 K. The behaviors of both species at high temperature are in agreement with extrapolations previously made from data below 600 K using a recently developed kinetic modeling approach. Measurements were also made on C{sub 2}F{sub 3}Br and C{sub 2}F{sub 5}Br (used in this work as precursors to the radicals) over the same temperature range, and, for C{sub 2}F{sub 5}Br as a function of electron temperature. The attachment rate constants to both species rise with temperature following Arrhenius behavior. The attachment rate constant to C{sub 2}F{sub 5}Br falls with increasing electron temperature, in agreement with the kinetic modeling. The current data fall in line with past predictions of the kinetic modeling approach, again showing the utility of this simplified approach.

  8. Dissociative attachment of electrons to vibronically excited SO{sub 2}

    SciTech Connect (OSTI)

    Kumar, S.V.K.; Ashoka, V.S.; Krishnakumar, E.

    2004-11-01

    Dissociative electron attachment (DEA) to vibronically excited SO{sub 2} in the Clements' band in the 288 to 298 nm region has been studied. The O{sup -} ion yield, to a first approximation, follows the photo absorption spectrum in this range indicating the DEA process to be independent of the vibrational levels in this band. This is in contrast to what is generally observed for vibrational level dependence from the electronic ground state. The current measurements also do not show any qualitative change in the dissociative attachment process due to change of symmetry as one moves from the peaks to the valleys of the Clements band.

  9. Simulation and Experiment of Thermal Fatigue in the CPV Die Attach: Preprint

    SciTech Connect (OSTI)

    Bosco, N.; Silverman, T.; Kurtz, S.

    2012-05-01

    FEM simulation and accelerated thermal cycling have been performed for the CPV die attach. Trends in fatigue damage accumulation and equivalent test time are explored and found to be most sensitive to temperature ramp rate. Die attach crack growth is measured through cycling and found to be in excellent agreement with simulations of the inelastic strain energy accumulated. Simulations of an entire year of weather data provides for the relative ranking of fatigue damage between four cites as well as their equivalent accelerated test time.

  10. Versonel: Order (2014-CE-21009)

    Broader source: Energy.gov [DOE]

    DOE ordered Smart Surplus, Inc. d/b/a Versonel to pay a $8,000 civil penalty after finding Versonel had failed to certify that certain models of refrigerators and residential clothes dryers comply with the applicable energy conservation standards.

  11. Whirlpool: Order (2013-SE-1420)

    Broader source: Energy.gov [DOE]

    DOE ordered Whirlpool Corporation to pay a $5,329,800 civil penalty after finding Whirlpool had manufactured and distributed in commerce in the U.S. at least 26,649 units of basic model 8TAR81 noncompliant refrigerator-freezer.

  12. Order 430.1D

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 In response to requirements of Executive Order 13287, Preserve America Office of History and Heritage Resources Office of the Executive Secretariat U.S. Department of Energy September 2014 An Assessment of Historic Properties and Preservation Activities at the U.S. Department of Energy Table of Contents Introduction ............................................................................................................................................ 3 Part I. Background and Overview

  13. Order 580.1D

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    580.1D Title: PERSONAL PROPERTY MANAGEMENT Owner: Thomas Wilson, Jr., Office of Institutional Operations Approving Official: Bradley J. Tomer, Chief Operating Officer, Office of the Director {signature} /s/ Bradley J. Tomer Approval Date: 8/3/12 Last Reviewed Date: 8/3/12 Cancellation: Order 580.1C, Personal Property Management TABLE OF CONTENTS 1. PURPOSE ..................................................................................................................................... 2 2.

  14. Teddico: Order (2012-SE-5409)

    Broader source: Energy.gov [DOE]

    DOE ordered The Electrical Design, Development and Implementation Company d/b/a Teddico to pay a $18,994 civil penalty after finding Teddico had manufactured and distributed in commerce in the U.S. 218 units of a variety of noncompliant metal halide lamp fixtures basic models.

  15. Topaz: Order (2014-CE-35005)

    Broader source: Energy.gov [DOE]

    DOE ordered Topaz Lighting Corp. to pay a $8,000 civil penalty after finding Topaz had failed to certify that certain basic models of medium base compact fluorescent lamps, general service fluorescent lamps, and illuminated exit signs comply with the applicable energy conservation standards.

  16. Midea: Order (2013-SE-1505)

    Broader source: Energy.gov [DOE]

    DOE ordered GD Midea Air-Conditioning Equipment Co. Ltd. to pay a $416,800 civil penalty after finding Midea had manufactured and distributed in commerce in the U.S. atleast 14,968 units of basic model MWJ1-08ERN1-BI8, a noncompliant room air conditioner.

  17. Bigwall: Order (2014-SE-15006)

    Broader source: Energy.gov [DOE]

    DOE ordered Bigwall Enterprises, Inc. to abide by the terms of the Notice of Noncompliance Determination, issued on February 11, 2014, after finding Bigwall Enterprises, Inc. had privately labeled and distributed in commerce in the U.S. at least 600 units of PerfectAire brand room air conditioner model PACH8000.

  18. AHT: Order (2015-SE-42031)

    Broader source: Energy.gov [DOE]

    DOE ordered AHT Cooling Systems, Inc. to pay a $179,040 civil penalty after finding AHT had manufactured and distributed in commerce in the U.S. at least 1,032 units of commercial refrigeration equipment model RIO S 68 L F, a noncompliant product.

  19. PQL: Order (2013-CE-27001)

    Broader source: Energy.gov [DOE]

    DOE ordered P.Q.L., Inc. to pay a $8,000 civil penalty after finding PQL had failed to certify that various basic models of medium base compact fluorescent lamps, general service fluorescent lamps, fluorescent lamp ballasts, and illuminated exit signs comply with the applicable energy conservation standards.

  20. Watermark: Order (2011-SW-2908)

    Broader source: Energy.gov [DOE]

    DOE ordered Watermark Designs, Ltd. to pay a $4,200 civil penalty after finding Watermark Designs, Ltd. had manufactured and distributed in commerce in the U.S. sixty-three units of basic model SH-FAL90, a noncompliant showerhead.

  1. Hicon: Order (2013-SE-1426)

    Broader source: Energy.gov [DOE]

    DOE ordered Ningbo Hicon International Industry Company, Ltd. to pay a $1,912,714 civil penalty after finding Hicon had manufactured and distributed in commerce in the U.S. 115,126 units of basic model BD-200, a noncompliant freezer.

  2. Midea: Order (2014-SW-20001)

    Broader source: Energy.gov [DOE]

    DOE ordered Hefei Rongshida Washing Equipment Manufacturing Co., Ltd. ("Hefei Rongshida"), a subsidiary of Midea Group, to pay a $64,780 civil penalty after finding Hefei Rongshida had manufactured and distributed in commerce in the U.S. 324 units of MAE80-S1702GPS, a noncompliant residential clothes washer.

  3. Kichler: Order (2014-CE-32007)

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE ordered The L.D. Kichler Co. d/b/a Kichler Lighting to pay a $8,000 civil penalty after finding Kichler had failed to certify that certain models of ceiling fans comply with the applicable energy conservation standards.

  4. Yosemite: Order (2014-CE-32015)

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE ordered Northern Central Distributing, Inc. d/b/a Yosemite Home Dcor to pay a $8,000 civil penalty after finding Yosemite had failed to certify that certain models of ceiling fans comply with the applicable energy conservation standards.

  5. Philips: Order (2012-SE-2605)

    Broader source: Energy.gov [DOE]

    DOE ordered Philips Lighting Electronics N. A. to pay a $82,478 civil penalty after finding Philips had manufactured and distributed in commerce in the U.S. 7,498 units of basic model VEL-1S40-SC, noncompliant fluorescent lamp ballasts.

  6. LG: Order (2014-SE-15011)

    Broader source: Energy.gov [DOE]

    DOE ordered LG Electronics USA, Inc. to pay a $1,479,860 civil penalty after finding LG had manufactured and distributed in commerce in the U.S. at least 7,438 units of basic model LT143CNR, a noncompliant room air conditioner.

  7. Universal: Order (2013-SE-26004)

    Broader source: Energy.gov [DOE]

    DOE ordered Universal Lighting Technologies, Inc. to pay a $7,264 civil penalty after finding Universal had manufactured and distributed in commerce in the U.S. 454 units of model B140R277HP, a noncompliant fluorescent lamp ballast.

  8. ELCO: Order (2014-SE-54005)

    Broader source: Energy.gov [DOE]

    DOE ordered ELCO Lighting to pay a $14,000 civil penalty after finding ELCO had failed to certify that certain models of illuminated exit signs and metal halide lamp fixtures comply with the applicable energy conservation standards and had failed to provide requested test data.

  9. Friedrich: Order (2014-SE-15010)

    Broader source: Energy.gov [DOE]

    DOE ordered Friedrich Air Conditioning Co. to pay a $1.5 million civil penalty after finding Friedrich had manufactured and distributed in commerce in the U.S. 8,241 units of Friedrich model SQ10N10, a noncompliant room air conditioner.

  10. DE-EM-0001971 WIPP M&O J-8 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT C: DRAFT PERFORMANCE EVALUATION AND MEASUREMENT PLAN (PEMP) DE-EM-0001971 WIPP M&O J-9 Draft PERFORMANCE EVALUATION AND MEASUREMENT PLAN (PEMP) OCTOBER 1 (2012) through SEPTEMBER 30, (2013) Contract No. DE- EM0001971 SECTION J ATTACHMENT C I. INTRODUCTION This Performance Evaluation and Measurement Plan (PEMP) provides a standard process for development, administration, and coordination of all phases of the

  11. Quality assurance grading guidelines for research and development at DOE facilities. DOE Order 5700.6C

    SciTech Connect (OSTI)

    Powell, T.B.; Morris, R.N.

    1992-10-01

    The quality assurance (QA) requirements for the US Department of Energy (DOE) are established in DOE Order 5700.6C. This order is applicable for all DOE departmental elements, management, and maintenance and operating contractors and requires that documented Quality Assurance Programs (QAPS) are prepared at all levels; it has one attachment. The DOE Office of Energy Research (DOE-ER) has issued a standard to ensure implementation of the full intent of this order in the ER community. This report discusses order 5700.6C in relation to research with DOE.

  12. NOTICE TO SUPPLIERS Fraudulent Quote Requests/Purchase Order E-Mail Activity

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

     The email message may be poorly written, with misspellings and awkward sentence structure.  The senders email address is not the same as CNS standard email address domain. The email address domain for Y-12: xxx@y12.doe.gov, for Pantex: xxx@pantex.com.  The message and purchase order requests shipment/delivery of products to non-CNS facilities.  The message will include an attachment that is designed to look like a purchase order, and includes a logo or other graphic, and a signature

  13. YMGI: Order (2011-SCE-1605)

    Broader source: Energy.gov [DOE]

    DOE ordered YMGI Group LLC to pay a $31,400 civil penalty after finding (1) YMGI had failed to certify that certain models of residential central air conditioners comply with the applicable energy conservation standards and (2) YMGI had distributed in commerce model TTWC-18K-31B, a through-the-wall air conditioner that does not meet the applicable energy conservation standard.

  14. Cooper: Order (2012-SE-4701)

    Broader source: Energy.gov [DOE]

    DOE ordered Cooper Power Systems, LLC to abide by the Compromise Agreement, which waived the civil penalty after finding Cooper had inadvertently distributed in commerce in the U.S. three models (total of five units) of distribution transformers. Cooper agrees to abide by the terms of a Notice of Noncompliance Determination to be issued pursuant to 10 C.F.R. § 429.114.

  15. Microsoft Word - WAP-WPN-02-6-Attachment-A.docx

    Office of Environmental Management (EM)

    ATTACHMENT A OTHER F EDERAL G OVERNMENT R EGULATIONS PERTAINING T O L EAD---BASED P AINT The p urpose o f t his s ection i s t o p rovide a h elpful r eference i ndicating w hat W...

  16. Dissociative Electron Attachment to Carbon Dioxide via the 8.2 eV Feshbach resonance

    SciTech Connect (OSTI)

    Slaughter, Dan; Adaniya, Hidihito; Rescigno, Tom; Haxton, Dan; Orel, Ann; McCurdy, Bill; Belkacem, Ali

    2011-08-17

    Momentum imaging experiments on dissociative electron attachment (DEA) to CO{sub 2} are combined with the results of ab initio calculations to provide a detailed and consistent picture of the dissociation dynamics through the 8.2 eV resonance, which is the major channel for DEA in CO{sub 2}. The present study resolves several puzzling misconceptions about this system.

  17. Ceramic to metal attachment system. [Ceramic electrode to metal conductor in MHD generator

    DOE Patents [OSTI]

    Marchant, D.D.

    1983-06-10

    A composition and method are described for attaching a ceramic electrode to a metal conductor. A layer of randomly interlocked metal fibers saturated with polyimide resin is sandwiched between the ceramic electrode and the metal conductor. The polyimide resin is then polymerized providing bonding.

  18. Protective interior wall and attaching means for a fusion reactor vacuum vessel

    DOE Patents [OSTI]

    Phelps, R.D.; Upham, G.A.; Anderson, P.M.

    1985-03-01

    The wall basically consists of an array of small rectangular plates attached to the existing walls with threaded fasteners. The protective wall effectively conceals and protects all mounting hardware beneath the plate array, while providing a substantial surface area that will absorb plasma energy.

  19. Understanding the Role of Solvation Forces on the Preferential Attachment of Nanoparticles in Liquid

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Welch, David A.; Woehl, Taylor J.; Park, Chiwoo; Faller, Roland; Evans, James E.; Browning, Nigel D.

    2015-11-20

    We discuss optimization of colloidal nanoparticle synthesis techniques, which requires an understanding of underlying particle growth mechanisms. Nonclassical growth mechanisms are particularly important as they affect nanoparticle size and shape distributions, which in turn influence functional properties. For example, preferential attachment of nanoparticles is known to lead to the formation of mesocrystals, although the formation mechanism is currently not well-understood. Here we employ in situ liquid cell scanning transmission electron microscopy and steered molecular dynamics (SMD) simulations to demonstrate that the experimentally observed preference for end-to-end attachment of silver nanorods is a result of weaker solvation forces occurring at rodmore » ends. In conclusion, SMD reveals that when the side of a nanorod approaches another rod, perturbation in the surface-bound water at the nanorod surface creates significant energy barriers to attachment. Additionally, rod morphology (i.e., facet shape) effects can explain the majority of the side attachment effects that are observed experimentally.« less

  20. International Refrigeration: Order (2012-CE-1510) | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    International Refrigeration: Order (2012-CE-1510) International Refrigeration: Order (2012-CE-1510) July 20, 2012 DOE ordered International Refrigeration Products to pay an 8,000 ...

  1. ORDER FOR SUPPLIES OR SERVICES

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 DE-DT0004203 12EM002688 EMCBC U.S. Department of Energy EM Consolidated Business Center 250 E. 5th Street, Suite 500 DEBRA MARKELONIS VISIONARY SOLUTIONS, LLC 111 UNION VALLEY ROAD, SUITE B OAK RIDGE TN 378308036 See Schedule 12. F.O.B. POINT Destination 1 Days After Award EMCBC - Carlsbad US Department of Energy Carlsbad Project Office Carlsbad NM 88221 EMCBC - Carlsbad ITEM NO. (a) SUPPLIES OR SERVICES (b) QUANTITY ORDERED (c) UNIT (d) UNIT PRICE (e) AMOUNT (f) QUANTITY ACCEPTED (g) X X 2

  2. ORDER FOR SUPPLIES OR SERVICES

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 DE-DT0005972 13EM002307 EMCBC U.S. Department of Energy EM Consolidated Business Center 250 E. 5th Street, Suite 500 DEBRA MARKELONIS VISIONARY SOLUTIONS, LLC 2553 QUALITY LANE KNOXVILLE TN 37931 See Schedule 12. F.O.B. POINT Destination 1 Days After Award EMCBC - Carlsbad US Department of Energy Carlsbad Project Office Carlsbad NM 88221 EMCBC - Carlsbad ITEM NO. (a) SUPPLIES OR SERVICES (b) QUANTITY ORDERED (c) UNIT (d) UNIT PRICE (e) AMOUNT (f) QUANTITY ACCEPTED (g) X 2 Destination

  3. Attachment K

    Office of Environmental Management (EM)

    ...P-5 Drilling Mud Pit(s) NFA granted 10232008 SWMU 001m P-6 Mud Pit NFA granted 10232008 SWMU 001n P-15 Mud Pit NFA granted 10232008 SWMU 001o Badger Unit Drilling Mud ...

  4. Attachment N

    Office of Environmental Management (EM)

    SCHEDULE Los Alamos National Laboratory Hazardous Waste Permit June 2012 2 Compliance Schedule This Compliance Schedule briefly lists particular requirements, in chronological...

  5. ATTACHMENT D

    Office of Environmental Management (EM)

    Applied Studies and Technology » AS&T Reports AS&T Reports 2016 Reports Uranium-Bearing Evaporite Mineralization Influencing Plume Persistence: Literature Review and DOE-LM Site Surveys Evaluation of Pre- and Post-Redevelopment Groundwater Chemical Analyses from LM Monitoring Wells 2014 Report Long-Term Surveillance Operations and Maintenance Fiscal Year 2014 Year-End Summary Report 2013 Reports Long-Term Surveillance Operations and Maintenance Fiscal Year 2013 Year-End Summary Report

  6. ATTACHMENT E

    Office of Environmental Management (EM)

    E INSPECTION PLAN Los Alamos National Laboratory Hazardous Waste Permit June 2012 1 TABLE OF CONTENTS LIST OF FIGURES 3 E.1 GENERAL INSPECTION SCHEDULES AND REQUIREMENTS 4 E.1.1 Inspection Records 4 E.1.2 Actions Resulting from Inspections 5 E.1.3 Training 6 E.2 INSPECTION SCHEDULE AND REQUIREMENTS FOR CONTAINER STORAGE UNITS 6 E.2.1 On Day(s) of Waste Handling 6 E.2.2 Weekly 6 E.3 INSPECTION SCHEDULE AND REQUIREMENTS FOR TANK SYSTEMS 7 E.3.1 Daily (During Operation) 7 E.3.2 Weekly 7 E.5

  7. ATTACHMENT F

    Office of Environmental Management (EM)

    TRAINING PLAN Los Alamos National Laboratory Hazardous Waste Permit December 2014 TABLE OF CONTENTS F.1 HAZARDOUS AND MIXED WASTE MANAGEMENT/RESPONSIBILITIES ............3 F.2 TRAINING CONTENT, FREQUENCY, AND TECHNIQUES ........................................3 F.2.1 Facility-Wide Courses .............................................................................................5 F.2.2 Unit-Specific Training

  8. ATTACHMENT G

    Office of Environmental Management (EM)

    7 TECHNICAL AREA 54, AREA G, PAD 3 OUTDOOR CONTAINER STORAGE UNIT CLOSURE PLAN Los Alamos National Laboratory Hazardous Waste Permit November 2010 TABLE OF CONTENTS LIST OF TABLES ....................................................................................................................................... iv LIST OF FIGURES ..................................................................................................................................... v 1.0 INTRODUCTION

  9. ATTACHMENT L

    Office of Environmental Management (EM)

    H POST-CLOSURE CARE PLANS (Reserved)

  10. ATTACHMENT L

    Office of Environmental Management (EM)

    O LONG-TERM MONITORING AND MAINTENANCE PLANS (Reserved)

  11. ATTACHMENT N

    Office of Environmental Management (EM)

    N FIGURES List of Figures for Permit Figure 1: LANL Regional Location Map Figure 2: LANL Facility Boundary and Technical Area (TA)-Specific Map Figure 3: LANL Facility Boundary with Detail of Non-LANL Areas Figure 4: TA-3 Security Fences, Entry Gates, and Entry Stations Figure 5: Reserved Figure 6: TA-50 Security Fences, Entry Gates, and Entry Stations Figure 7: TA-54, Area L, Security Fences, Entry Gates, and Entry Stations Figure 8: TA-54, Area G, Security Fences, Entry Gates, and Entry

  12. Attachment A

    Office of Environmental Management (EM)

    work with a mentor. "Professional development" activities result in increased knowledge or skill in one's area of expertise and may include workshops, conferences, seminars, study groups, and individual study. Include participation in conferences, workshops, and seminars not listed under major activities. How have the results been disseminated to communities of interest? Describe how the results have been disseminated to communities of interest. Include any outreach activities that

  13. Attachment J

    Office of Environmental Management (EM)

    UNITS Los Alamos National Laboratory Hazardous Waste Permit December 2014 TABLE J-1 Active Portion of the Facility Includes units permitted to store and treat hazardous waste, interim status units, and the Material Disposal Areas. Process codes and associated process descriptions: * S01-storage in containers * S02-storage in tanks * S99-other storage * D80-landfill * T04 - treatment in tanks * X01*-open burning * X01**-open detonation Unit Identifier Process Codes Operating Capacity General

  14. Attachment M

    Office of Environmental Management (EM)

    M (reserved)

  15. Attachment Q

    Office of Environmental Management (EM)

    L LISTING OF OFF-SITE FACILITIES Los Alamos National Laboratory Hazardous Waste Permit November 2010 2 TABLE L List of Off-Site Waste Management Facilities that May Return Treatment-Derived Waste or Waste Residuals to the Los Alamos National Laboratory Off-Site Facility EPA Identification Number Diversified Scientific Services, Inc., Kingston, TN TND982109142 Energy Solutions, TN TND982157570 Energy Solutions, Clive, UT UTD 982598898 Materials and Energy Corporation, Oak Ridge, TN TNR000005397

  16. Attachment O

    Office of Environmental Management (EM)

    ... running averages and the ventilation simulation software 33 programs shall be ... X Calibrated Barometers X X Electronic Manometer X X Waste Isolation Pilot Plant ...

  17. Attachment L

    Office of Environmental Management (EM)

    ... WLMP WIPP Groundwater Level Monitoring Program gL ... Pilot Plant Hazardous Waste Permit February 2014 PERMIT ... determination, data 4 management, and reporting of ...

  18. Attachment E

    Office of Environmental Management (EM)

    ... for inspection. 38 Waste handling equipment and ... A deficiency, such 7 as low fluid level, may be corrected by the ... Number and Inspection Criteria Air Intake Shaft Hoist ...

  19. Attachment B

    Office of Environmental Management (EM)

    B HAZARDOUS WASTE PERMIT APPLICATION PART A Waste Isolation Pilot Plant Hazardous Waste Permit April 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous ...

  20. ATTACHMENT A

    Office of Environmental Management (EM)

    A4 TRAFFIC PATTERNS Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 ...

  1. Attachment A

    Office of Environmental Management (EM)

    GENERAL FACILITY DESCRIPTION AND PROCESS INFORMATION Waste Isolation Pilot Plant Hazardous Waste Permit April 2014 (This page intentionally blank) Waste Isolation Pilot Plant Draft ...

  2. Attachment N

    Office of Environmental Management (EM)

    N VOLATILE ORGANIC COMPOUND MONITORING PLAN Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous ...

  3. Attachment A

    Office of Environmental Management (EM)

    Project Speak of the Nation's History | Department of Energy Atomic Bombs, Winning the War and Women in Pants: Voices of the Manhattan Project Speak of the Nation's History Atomic Bombs, Winning the War and Women in Pants: Voices of the Manhattan Project Speak of the Nation's History November 28, 2012 - 12:00pm Addthis Manhattan Project veteran Ralph Gates (far right) celebrates Christmas in 1945. Gates contributed to the Voices of the Manhattan Project, a storytelling project launched by

  4. Attachment I

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7130 W. Grandridge Blvd., Ste. A Phone: 509.735. 1000 T R ID E C Kennewick, WA 99336-7 72"5 Fax: 509.735.6609 TRI-(:ITY l)E\'IEL()PMNENT ('0LNCIL1 www.TRIDEC.org 1 -800-TRI-CITY May 31, 2011 Mr. Malt McCormick, Manager U.S. Department of Energy, Richland Operations Office P0 Box 550 - A7-50 Richland, WA 99352 Dear Matt: As you know, TRI DEC along with the City of Richland, the Port of Benton and Benton County have been working together in preparation to formally request a transfer of DOE

  5. Executive Order 13423: Strengthening Federal Environmental, Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Executive Order 13423: Strengthening Federal Environmental, Energy, and Transportation Management Executive Order 13423: Strengthening Federal Environmental, Energy, and ...

  6. DE-EM-0001971 WIPP M&O J-7 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT B: SMALL, SMALL DISADVANTAGED, AND WOMEN-OWNED SMALL BUSINESS SUBCONTRACTING PLAN (The Subcontracting Plan dated, August 17, 2011 which was approved on March 27, 2012, is hereby incorporated

  7. Mission Support Contract Attachment J.10 Contract No. DE-AC06-09RL14728 Modification 502

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Attachment J.10 Contract No. DE-AC06-09RL14728 Modification 502 Table of Contents J.10-1 SERVICE CONTRACT ACT: WAGE DETERMINATION ...................................................................... 2 J.10-2 DAVIS BACON ACT: GENERAL DECISION ..................................................................................... 22 J.10-3 COLLECTIVE BARGAINING ACT: WAGE DETERMINATION ........................................................... 33 Mission Support Contract Attachment J.10 Contract

  8. Observation of the dynamics leading to a conical intersection in dissociative electron attachment to water

    SciTech Connect (OSTI)

    Haxton, Dan; Adaniya, Hidihito; Slaughter, Dan; Rudek, B.; Osipov, Timur; Weber, Thorsten; Rescigno, Tom; McCurdy, Bill; Belkacem, Ali

    2011-06-08

    Following prior work on the lower-energy resonances, we apply techniques of momentum imaging and ab initio scattering calculations to the process of dissociative electron attachment to water via the highest-energy {sup 2}B{sub 2} resonance. We focus on the H{sup -} anion fragment, which is produced via dynamics passing through and avoiding the conical intersection with the lower A{sub 1} state, leading to OH ((sup 2}{Pi}#5;) and OH ({sup 2}{Sigma}#6;), respectively. The momentum imaging technique, when combined with theoretical calculations on the attachment amplitude and dissociation dynamics, demonstrates that the angular distributions provide a signature of the location of the conical intersection in the space of nuclear con#12;gurations.

  9. Clip gage attachment for frictionless measurement of displacement during high-temperature mechanical testing

    DOE Patents [OSTI]

    Alexander, D.J.

    1994-01-04

    An attachment for placement between a test specimen and a remote clip gage extensometer providing improved fracture toughness tests of materials at elevated temperature is described. Using a cylindrical tube and axial rod in new relationship, the device transfers the displacement signal of the fracture toughness test specimen directly to a clip gage extensometer located outside the high temperature furnace. Virtually frictionless operation is assured by having the test specimen center one end of the rod in one end of the tube, while the clip gage extensometer arms center the other end of the rod in the other end of the tube. By providing positive control over both ends of both rod and tube, the attachment may be operated in orientations other than vertical. 1 figure.

  10. Clip gage attachment for frictionless measurement of displacement during high-temperature mechanical testing

    DOE Patents [OSTI]

    Alexander, David J.

    1994-01-01

    An attachment for placement between a test specimen and a remote clip gage extensometer providing improved fracture toughness tests of materials at elevated temperature. Using a cylindrical tube and axial rod in new relationship, the device transfers the displacement signal of the fracture toughness test specimen directly to a clip gage extensometer located outside the high temperature furnace. Virtually frictionless operation is assured by having the test specimen center one end of the rod in one end of the tube, while the clip gage extensometer arms center the other end of the rod in the other end of the tube. By providing positive control over both ends of both rod and tube, the attachment may be operated in orientations other than vertical.

  11. Reliability of Emerging Bonded Interface Materials for Large-Area Attachments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Reliability of Emerging Bonded Interface Materials for Large- Area Attachments Paul Paret, Douglas DeVoto, and Sreekant Narumanchi Published in IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 6, no. 1, pp. 40-49, Jan. 2016. doi: 10.1109/TCPMT.2015.2499767 © 2015 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or

  12. Microsoft Word - FEORP Attachments 1, 3, 4 & 5 - Cert. page + short narratives

    National Nuclear Security Administration (NNSA)

    US Department of Energy National Nuclear Security Administration FY 2015 Annual Federal Equal Opportunity Recruitment Program (FEORP) Plan October 2015 NNSA Office of Civil Rights, NA-1.2 NNSA FY 2015 FEORP Report FY 2015 Accomplishments Attachment 2 Instructions: Identify and outline the objectives and goals that were set in each area, based on the three Goal Areas, as reflected in the FEORP Plan for FY 2015. Outline the agency's final FY 2015 outcome, using the previously-established

  13. SECTION L … ATTACHMENT xx … KEY PERSONNEL AND CRITICAL WORK AREA PERSONNEL RESUME ELEMENTS

    National Nuclear Security Administration (NNSA)

    2] Attachment L-3a KEY PERSONNEL RESUME ELEMENTS 1. Name of Offeror: 2. Name of Key Person: 3. Proposed Position: 4. Duties and Responsibilities in Proposed Position including elements of SOW assigned: 5. Chronological Work History: Start with current position and work backwards. A. Name and Address of Firm: B. Position(s) Held: C. Dates of Employment: D. General Summary of Responsibilities: Provide a concise description of major duties and responsibilities for each job relevant to the proposed

  14. Scaling exponents for ordered maxima

    SciTech Connect (OSTI)

    Ben-Naim, E.; Krapivsky, P. L.; Lemons, N. W.

    2015-12-22

    We study extreme value statistics of multiple sequences of random variables. For each sequence with N variables, independently drawn from the same distribution, the running maximum is defined as the largest variable to date. We compare the running maxima of m independent sequences and investigate the probability SN that the maxima are perfectly ordered, that is, the running maximum of the first sequence is always larger than that of the second sequence, which is always larger than the running maximum of the third sequence, and so on. The probability SN is universal: it does not depend on the distribution from which the random variables are drawn. For two sequences, SN~N–1/2, and in general, the decay is algebraic, SN~N–σm, for large N. We analytically obtain the exponent σ3≅1.302931 as root of a transcendental equation. Moreover, the exponents σm grow with m, and we show that σm~m for large m.

  15. Scaling exponents for ordered maxima

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ben-Naim, E.; Krapivsky, P. L.; Lemons, N. W.

    2015-12-22

    We study extreme value statistics of multiple sequences of random variables. For each sequence with N variables, independently drawn from the same distribution, the running maximum is defined as the largest variable to date. We compare the running maxima of m independent sequences and investigate the probability SN that the maxima are perfectly ordered, that is, the running maximum of the first sequence is always larger than that of the second sequence, which is always larger than the running maximum of the third sequence, and so on. The probability SN is universal: it does not depend on the distribution frommore » which the random variables are drawn. For two sequences, SN~N–1/2, and in general, the decay is algebraic, SN~N–σm, for large N. We analytically obtain the exponent σ3≅1.302931 as root of a transcendental equation. Moreover, the exponents σm grow with m, and we show that σm~m for large m.« less

  16. Dissociative electron attachments to ethanol and acetaldehyde: A combined experimental and simulation study

    SciTech Connect (OSTI)

    Wang, Xu-Dong; Xuan, Chuan-Jin; Feng, Wen-Ling; Tian, Shan Xi

    2015-02-14

    Dissociation dynamics of the temporary negative ions of ethanol and acetaldehyde formed by the low-energy electron attachments is investigated by using the anion velocity map imaging technique and ab initio molecular dynamics simulations. The momentum images of the dominant fragments O{sup −}/OH{sup −} and CH{sub 3}{sup −} are recorded, indicating the low kinetic energies of O{sup −}/OH{sup −} for ethanol while the low and high kinetic energy distributions of O{sup −} ions for acetaldehyde. The CH{sub 3}{sup −} image for acetaldehyde also shows the low kinetic energy. With help of the dynamics simulations, the fragmentation processes are qualitatively clarified. A new cascade dissociation pathway to produce the slow O{sup −} ion via the dehydrogenated intermediate, CH{sub 3}CHO{sup −} (acetaldehyde anion), is proposed for the dissociative electron attachment to ethanol. After the electron attachment to acetaldehyde molecule, the slow CH{sub 3}{sup −} is produced quickly in the two-body dissociation with the internal energy redistributions in different aspects before bond cleavages.

  17. Executive Order 13673 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    673 Executive Order 13673 Executive Order 13673, proposed Federal Acquisition Regulation rule, and proposed Department of Labor guidance are available at: Executive Order 13673 Proposed Federal Acquisition Regulation Rule Proposed Department of Labor Guidance Informational slides about the Executive Order are available below: File Executive Order 13673

  18. Structures for attaching or sealing a space between components having different coefficients or rates of thermal expansion

    DOE Patents [OSTI]

    Corman, Gregory Scot; Dean, Anthony John; Tognarelli, Leonardo; Pecchioli, Mario

    2005-06-28

    A structure for attaching together or sealing a space between a first component and a second component that have different rates or amounts of dimensional change upon being exposed to temperatures other than ambient temperature. The structure comprises a first attachment structure associated with the first component that slidably engages a second attachment structure associated with the second component, thereby allowing for an independent floating movement of the second component relative to the first component. The structure can comprise split rings, laminar rings, or multiple split rings.

  19. DOE TRANSCOM Technical Support Services DE-EM0002903 PART III - LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PART III - LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS SECTION J LIST OF ATTACHMENTS Attachment Description Number of Pages J-1 LIST OF APPLICABLE DOE DIRECTIVES 1 J-2 LIST OF DELIVERABLES 4 J-3 PROJECT MANAGER MINIMUM LABOR QUALIFCATION 1 J-4 GOVERNMENT FURNISHED PROPERTY AND INFORMATION LIST 7 J-5 TRANSCOM PROGRAM DOCUMENTS 1 J-6 ACRONYM LIST 2 J-7 CONFERENCE ATTENDANCE APPROVAL REQUEST 2 J-8 SERVICE CONTRACT ACT WAGE DETERMINATION 10 J-9 DOE OFFICE OF ENVIRONMENTAL MANAGEMENT FY 13

  20. Order - DOE Directives, Delegations, and Requirements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Order by Website Administrator application/vnd.openxmlformats-officedocument.wordprocessingml.document icon order template.docx - application/vnd.openxmlformats-officedocument.wordprocessingml.document, 48 KB (49165

  1. Public Order and Safety | Open Energy Information

    Open Energy Info (EERE)

    Safety Jump to: navigation, search Building Type Public Order and Safety Definition Buildings used for the preservation of law and order or public safety. Sub Categories police...

  2. Implementation of Executive Order 12114 Environmental Effects...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Implementation of Executive Order 12114 Environmental Effects Abroad of Major Federal Actions: Final Guideline (DOE, 1981) Implementation of Executive Order 12114 Environmental ...

  3. Consent Order EA-2005-01

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    20585 July 28, 2005 Mr. T. E. Logan, President Bechtel Hanford, Inc. 3070 George Washington Way Richland, WA 99352 Consent Order 2005-01 Subject: Consent Order Incorporating ...

  4. NOTICE TO SUPPLIERS Fraudulent Quote Requests/Purchase Order E-Mail Activity

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    * The email message may be poorly written, with misspellings and awkward sentence structure. * The sender's email address is not the same as CNS standard email address domain. The email address domain for Y-12: xxx@y12.doe.gov, for Pantex: xxx@pantex.com. Email from either site may also be in this form: xxx@cns.doe.gov. * The message and purchase order requests shipment/delivery of products to non-CNS facilities. * The message will include an attachment that is designed to look like a purchase

  5. T-534: Vulnerability in the PDF distiller of the BlackBerry Attachment Service for the BlackBerry Enterprise Server

    Broader source: Energy.gov [DOE]

    BlackBerry advisory describes a security issue that the BlackBerry Attachment Service component of the BlackBerry Enterprise Server is susceptible to. The issue relates to a known vulnerability in the PDF distiller component of the BlackBerry Attachment Service that affects how the BlackBerry Attachment Service processes PDF files.

  6. Physician Treatment Order | Department of Energy

    Energy Savers [EERE]

    Physician Treatment Order Physician Treatment Order FEDERAL OCCUPATIONAL HEALTH Physician Treatment Orders - FOH-24 Form (formerly 229-B) PDF icon FOH-24 Physician Treatment Orders.pdf More Documents & Publications Allergy Injection Policy Handicapped Parking Guidance Before the House Foreign Affairs Subcommittee on Asia, the Pacific and the Global Environment

  7. DE-EM-0001971 WIPP M&O J-2 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT A LAWS, REGULATIONS, AND DIRECTIVES (DEC 2000) (a) In performing work under this contract, the Contractor shall comply with the requirements of applicable Federal, State, and local laws and regulations (including DOE regulations), unless relief has been granted in writing by the appropriate regulatory agency. (b) In performing work under this contract, the Contractor shall comply with the requirements of those

  8. DE-SOL-0002555 WIPP Solicitation J-26 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT G: SUMMARY OF CONTRACT DELIVERABLES DE-SOL-0002555 WIPP Solicitation J-27 SUMMARY OF CONTRACT DELIVERABLES Deliverable Reference Deliverable DOE Action Deliverable Due Date 1 1. C.3.1.5 Ten Year Site Plan Approval Within 6 months of written notice to proceed, updated annually 2. C.3.1.5 Maintenance Plan (including Nuclear Maintenance Management Plan) Approval Within 6 months of written notice to proceed, updated

  9. DE-SOL-0002555 WIPP Solicitation J-34 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT I: FY2011 ANNUAL PERFORMANCE AGREEMENT WITH THE ASSISTANT SECRETARY Office of Environmental Management Performance Agreement with the Assistant Secretary Overview The Office of Environmental Management (EM) is working to complete the safe cleanup of the environmental legacy brought about from five decades of nuclear weapons development and government-sponsored nuclear energy research. For FY 2011, EM's

  10. Fiber-optic strain gauge with attached ends and unattached microbend section

    DOE Patents [OSTI]

    Weiss, J.D.

    1992-07-21

    A strain gauge is made of an optical fiber into which quasi-sinusoidal microbends have been permanently introduced. The permanent microbends cause a reduction in the fiber's optical transmission, but, when the gauge is attached to a substrate that is subsequently strained, the amplitude of the deformations will diminish and the optical transmission through the fiber will increase. An apparatus and process for manufacturing these microbends into the optical fiber through a heat-set process is employed; this apparatus and process includes a testing and calibration system. 5 figs.

  11. Fiber-optic strain gauge with attached ends and unattached microbend section

    DOE Patents [OSTI]

    Weiss, Jonathan D. (Albuquerque, NM)

    1992-01-01

    A strain gauge is made of an optical fiber into which quasi-sinusoidal microbends have been permanently introduced. The permanent microbends cause a reduction in the fiber's optical transmission, but, when the gauge is attached to a substrate that is subsequently strained, the amplitude of the deformations will diminish and the optical transmission through the fiber will increase. An apparatus and process for manufacturing these microbends into the optical fiber through a heat-set process is employed; this apparatus and process includes a testing and calibration system.

  12. Request for Proposal No. DE-SOL-0008418 SECTION L ATTACHMENT H

    National Nuclear Security Administration (NNSA)

    SECTION L ATTACHMENT H LETTER OF COMMITMENT I, [INSERT NAME], hereby certify that the resume submitted with this letter is true and correct. I agree to accept the position of [INSERT KEY PERSONNEL POSITION] with [NAME OF OFFEROR] if [NAME OF OFFEROR] is the entity selected to perform the scope of work set forth in solicitation DE-SOL-008418. My proposed total annual compensation ("compensation" is defined in 41 § U.S.C. 1127(a)(3)) as the [INSERT KEY PERSONNEL POSITION] for [NAME OF

  13. SECTION L … ATTACHMENT C - INSTRUCTIONS FOR SMALL BUSINESS SUBCONTRACTING PLAN

    National Nuclear Security Administration (NNSA)

    C, Page 1 SECTION L ATTACHMENT C INSTRUCTIONS FOR SMALL BUSINESS SUBCONTRACTING PLAN FAR 19.708(b) prescribes the use of Section I clause FAR 52.219-9, Small Business Subcontracting Plan. The following is a suggested model for use when formulating such a plan. While this model has been designed to be consistent with FAR 52.219-9, other formats of a subcontracting plan may be acceptable. However, failure to include the essential information as exemplified in this model may cause a delay in the

  14. Attachment L-7b Vietnam Design Requirements Document is an Official

    National Nuclear Security Administration (NNSA)

    b Vietnam Design Requirements Document is an Official Use Only document please see Section NNS-L-2000 for instructions to Obtain. Section NNS-L-2000 (a) (8) Official Use Only (OUO) Document. The Government considers the Vietnam Design Requirements Document, Attachment L-7b an OUO Document and it cannot be made available to the public via any public webpages (e.g. FebBizOpps, FedConnect, DICCE2 acquisition webpage, Reading Room). The Vietnam Design Requirements Document (DRD) may assist Offerors

  15. System and method for changing a glove attached to a glove box

    DOE Patents [OSTI]

    Aluisi, Alan

    2001-01-01

    A system for changing the gloves of a glove box. The system requires the use of a new glove and a glove change ring to form a temporary secondary barrier to the exchange of atmospheres between the inner glove box and the room in which the glove box is operated. The system describes specific means for disengaging a used glove from the glove box port. The means for disengaging the used glove include use of a glove change hook and use of a glove with an attached tab for use in removal. A method for changing the gloves of a glove box is also described.

  16. Nevada National Security Site Environmental Report 2012 Attachment A: Site Description

    SciTech Connect (OSTI)

    Wills, Cathy A

    2013-09-11

    This attachment expands on the general description of the Nevada National Security Site (NNSS) presented in the Introduction to the Nevada National Security Site Environmental Report 2012 (National Security Technologies, LLC [NSTec], 2013). Included are subsections that summarize the site’s geological, hydrological, climatological, and ecological setting and the cultural resources of the NNSS. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NNSS. An adequate knowledge of the site’s environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NNSS. The NNSS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NNSS operations. These key features include the general remote location of the NNSS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  17. Nevada National Security Site Environmental Report 2013 Attachment A: Site Description

    SciTech Connect (OSTI)

    Wills, C.

    2014-09-09

    This attachment expands on the general description of the Nevada National Security Site (NNSS) presented in the Introduction to the Nevada National Security Site Environmental Report 2012 (National Security Technologies, LLC [NSTec], 2013). Included are subsections that summarize the site’s geological, hydrological, climatological, and ecological setting and the cultural resources of the NNSS. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NNSS. An adequate knowledge of the site’s environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NNSS. The NNSS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NNSS operations. These key features include the general remote location of the NNSS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  18. The Effect of an Externally Attached Neutrally Buoyant Transmitter on Mortal Injury during Simulated Hydroturbine Passage

    SciTech Connect (OSTI)

    Brown, Richard S.; Pflugrath, Brett D.; Carlson, Thomas J.; Deng, Zhiqun

    2012-02-03

    On their seaward migration, juvenile salmonids commonly pass hydroelectric dams. Fish passing through hydroturbines experience a rapid decrease in pressure as they pass by the turbine blade and the severity of this decompression can be highly variable. This rapid decrease in pressure can result in injuries such as swim bladder rupture, exophthalmia, and emboli and hemorrhaging in the fins and tissues. However, recent research indicates that the presence of a telemetry tag (acoustic, radio, inductive) implanted inside the coelom of a juvenile salmon increases the likelihood that the fish will be injured or die during turbine passage. Thus, previous research conducted using telemetry tags implanted into the coelom of fish may have been inaccurate. Thus, a new technique is needed to provide unbiased estimates of survival through turbines. This research provides an evaluation of the effectiveness of a neutrally buoyant externally attached acoustic transmitter. Both nontagged fish and fish tagged with a neutrally buoyant external transmitter were exposed to a range of rapid decompressions simulating turbine passage. Juvenile Chinook salmon tagged with a neutrally buoyant externally attached acoustic transmitter did not receive a higher degree of barotrauma than their nontagged counterparts. We suggest that future research include field-based comparisons of survival and behavior among fish tagged with a neutrally buoyant external transmitter and those internally implanted with transmitters.

  19. Nevada National Security Site Environmental Report 2011 Attachment A: Site Description

    SciTech Connect (OSTI)

    Cathy Wills, ed.

    2012-09-12

    This attachment expands on the general description of the Nevada National Security Site (NNSS) presented in the Introduction to the Nevada National Security Site Environmental Report 2011. Included are subsections that summarize the site's geological, hydrological, climatological, and ecological setting and the cultural resources of the NNSS. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NNSS. An adequate knowledge of the site's environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NNSS. The NNSS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NNSS operations. These key features include the general remote location of the NNSS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  20. GreenOrder | Open Energy Information

    Open Energy Info (EERE)

    York Zip: 10016 Product: Founded in 2000, GreenOrder is a sustainability strategy and marketing firm References: GreenOrder1 This article is a stub. You can help OpenEI by...

  1. LLNS Beryllium Consent Order Fact Sheet

    Energy Savers [EERE]

    - LLNS Beryllium Consent Order SUMMARY OF CONSENT ORDER In November 2010, the U.S. Department of Energy (DOE) and the National Nuclear Security Administration (NNSA) issued a consent order to Lawrence Livermore National Security, LLC (LLNS) for deficiencies related to LLNS's implementation of DOE's Chronic Beryllium Disease Prevention Program (CBDPP) regulation at Lawrence Livermore National Laboratory. The consent order requires LLNS to implement corrective actions that will ensure LLNS meets

  2. DNA Clone Ordering from Shotgun Clone Libraries

    Energy Science and Technology Software Center (OSTI)

    1995-11-28

    CORD is an implementation of an algorithm for determining the order of clones from shotgun clone libraries.

  3. Executive Order 13423- Strengthening Federal Environmental, Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Environmental, Energy, and Transportation Management Executive Order 13423- Strengthening Federal Environmental, Energy, and Transportation Management It is the policy of ...

  4. Executive Order 12123 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2123 Executive Order 12123 Document covers the extracted pages of Executive Order 12123. PDF icon eo13123.pdf More Documents & Publications EO 13123-Greening the Government Through Efficient Energy Management Project Reports for Yukon-Kuskokwim Health Corporation - 2002 Project Executive Order 13221-Energy Efficient Standby Power Devices

  5. Antenna factorization in strongly ordered limits

    SciTech Connect (OSTI)

    Kosower, David A.

    2005-02-15

    When energies or angles of gluons emitted in a gauge-theory process are small and strongly ordered, the emission factorizes in a simple way to all orders in perturbation theory. I show how to unify the various strongly ordered soft, mixed soft-collinear, and collinear limits using antenna factorization amplitudes, which are generalizations of the Catani-Seymour dipole factorization function.

  6. 3D Reconstruction of Biological Organization and Mineralization in Sediment Attached Biofilms During Uranium Bioremediation

    SciTech Connect (OSTI)

    Banfield, Jillian; Comolli, Luis R.; Singer, Steve

    2014-11-17

    Of central interest in this study were microbial communities attached to sediment particles and in associated groundwater. Are the communities similar? What do the organisms look like and how do they associated with each other? Research was conducted on samples collected from the Department of Energy's (DOE) Rifle Integrated Field Research Challenge (IFRC) site in Rifle, Colorado, USA. This site served first as a test case for in situ bioremediation via biostimulation, and more recently as a location for studying the role of microbial communities in the carbon and other linked biogeochemical cycles. We addressed the question of the nature of planktonic to sediment-attached microbial communities using field and laboratory experimental studies with a range of methods that provide 2- and 3-dimensional topological information coupled to information about chemical speciation, organism type, and activity levels. The research leveraged data from metagenomics and proteomics analyses that obtained through parallel work at the Rifle site in the context of the IFRC. In this project we integrated characterization methods with extensive genomic sequence information and associated environmental data to better understand the processes that occur within groundwater and sediment-attached communities. Notable is the range of characterization methods, including scanning transmission x-ray microscopy (STXM), micro-EXAFS/XANES and microdiffraction and 2D and 3D cryo-electron tomographic analysis, and high-resolutino transmission electron microscope (HRTEM) analysis to characterize these natural microbial communities. A cryo-TEM work was unique because samples for electron microscopic characterization were cryo-plunged directly on site immediately after sampling. This step minimizes post-collection alterations, including cell damages and change of redox state. Among many achievements documented in publications listed at the end of this report, we highlight the following: 1) The development of a platform for routine correlative cryogenic microscopy and spectroscopy with samples prepared on-site. 2) The determination of which organisms dominate planktonic and biofilm communities in the subsurface. 3) Identification of microorganism-mineral associations and discovery of a novel mechanism that sustains activity of iron-reducing bacteria. 4) The detection of bacteria from the OP11-OD1-WWE3 (etc.) radiation and elucidation of their remarkable structural organization by cryog-TEM cryo-electron tomograhpy (cryo-ET). 5) Extensive analysis of biofilms and documentation of the association of cells and Se minerals. 6) The comparison of expressed c-type cytochromes between pure cultures of G. bemidjiensis and related field populations, provided insight into possible molecular mechanisms for U(VI) reduction in the aquifer. At least sixteen publications will result from this project (partial support), which provide both graduate student and post doctoral training.

  7. Nuclear reactor fuel assembly duct-tube-to-inlet-nozzle attachment system

    DOE Patents [OSTI]

    Christiansen, David W. (Kennewick, WA); Smith, Bob G. (Kennewick, WA)

    1982-01-01

    A reusable system for removably attaching the lower end 21 of a nuclear reactor fuel assembly duct tube to an upper end 11 of a nuclear reactor fuel assembly inlet nozzle. The duct tube's lower end 21 has sides terminating in locking tabs 22 which end in inwardly-extending flanges 23. The flanges 23 engage recesses 13 in the top section 12 of the inlet nozzle's upper end 11. A retaining collar 30 slides over the inlet nozzle's upper end 11 to restrain the flanges 23 in the recesses 13. A locking nut 40 has an inside threaded portion 41 which engages an outside threaded portion 15 of the inlet nozzle's upper end 11 to secure the retaining collar 30 against protrusions 24 on the duct tube's sides.

  8. Composite materials with metal oxide attached to lead chalcogenide nanocrystal quantum dots with linkers

    DOE Patents [OSTI]

    Fuke, Nobuhiro; Koposov, Alexey Y; Sykora, Milan; Hoch, Laura

    2014-12-16

    Composite materials useful for devices such as photoelectrochemical solar cells include a substrate, a metal oxide film on the substrate, nanocrystalline quantum dots (NQDs) of lead sulfide, lead selenide, and lead telluride, and linkers that attach the NQDs to the metal oxide film. Suitable linkers preserve the 1s absorption peak of the NQDs. A suitable linker has a general structure A-B-C where A is a chemical group adapted for binding to a MO.sub.x and C is a chemical group adapted for binding to a NQD and B is a divalent, rigid, or semi-rigid organic spacer moiety. Other linkers that preserve the 1s absorption peak may also be used.

  9. No-migration variance petition. Appendix B, Attachments E--Q: Volume 4, Revision 1

    SciTech Connect (OSTI)

    Not Available

    1990-03-01

    Volume IV contains the following attachments: TRU mixed waste characterization database; hazardous constituents of Rocky flats transuranic waste; summary of waste components in TRU waste sampling program at INEL; total volatile organic compounds (VOC) analyses at Rocky Flats Plant; total metals analyses from Rocky Flats Plant; results of toxicity characteristic leaching procedure (TCLP) analyses; results of extraction procedure (EP) toxicity data analyses; summary of headspace gas analysis in Rocky Flats Plant (RFP) -- sampling program FY 1988; waste drum gas generation--sampling program at Rocky Flats Plant during FY 1988; TRU waste sampling program -- volume one; TRU waste sampling program -- volume two; and summary of headspace gas analyses in TRU waste sampling program; summary of volatile organic compounds (V0C) -- analyses in TRU waste sampling program.

  10. Executive Order 13007 Indian Sacred Sites (1996)

    Office of Environmental Management (EM)

    6771 Federal Register / Vol. 61, No. 104 / Wednesday, May 29, 1996 / Presidential Documents Executive Order 13007 of May 24, 1996 Indian Sacred Sites By the authority vested in me as President by the Constitution and the laws of the United States, in furtherance of Federal treaties, and in order to protect and preserve Indian religious practices, it is hereby ordered: Section 1. Accommodation of Sacred Sites. (a) In managing Federal lands, each executive branch agency with statutory or

  11. Resonant radiation from oscillating higher order solitons

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Driben, R.; Yulin, A. V.; Efimov, A.

    2015-07-15

    We present radiation mechanism exhibited by a higher order soliton. In a course of its evolution the higher-order soliton emits polychromatic radiation resulting in formation of multipeak frequency comb-like spectral band. The shape and spectral position of this band can be effectively controlled by the relative strength of the third order dispersion. An analytical description is corroborated by numerical simulations. Research showed that for longer pulses the described effect persists also under the action of higher order perturbations such as Raman and self-steepening.

  12. Engineered Solutions: Order (2010-CE-2112)

    Broader source: Energy.gov [DOE]

    DOE issued an Order after entering into a Compromise Agreement with Engineered Solutions, Inc. to resolve a case involving the failure to certify dehumidifier basic model SD109.

  13. Executive Order 13583, Establishing a Coordinated Government...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    13583, Establishing a Coordinated Government-Wide Initiative to Promote Diversity and Inclusion in the Federal Workforce Executive Order 13583, Establishing a Coordinated...

  14. NMED Presentation on Revised Consent Order

    Broader source: Energy.gov [DOE]

    At the November 12, 2015 Special NNMCAB Meeting NMED Secretary Ryan Flynn provided a presentation on the Revisions to the 2005 Order on Consent.

  15. President Truman Orders Development of Thermonuclear Weapon ...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Photo Gallery Jobs Apply for Our Jobs Our Jobs Working at NNSA Blog Home About Us Our History NNSA Timeline President Truman Orders Development of Thermonuclear Weapon...

  16. Consent Order, Brookhaven Science Associates, LLC

    Broader source: Energy.gov [DOE]

    Worker Safety and Health Enforcement Consent Order issued to Brookhaven Science Associates, LLC relating to an electrical shock event that occurred at the Brookhaven National Laboratory.

  17. West Valley Demonstration Project Administrative Consent Order...

    Office of Environmental Management (EM)

    State New York Agreement Type Consent Order Legal Driver(s) RCRA Scope Summary Protect human health and the environment from releases of hazardous waste andor hazardous...

  18. West Valley Demonstration Project Administrative Consent Order...

    Office of Environmental Management (EM)

    Department of Energy (DOE) enter into this Order regarding ... C. In the event that the terms and conditions of this ... EM HOME | DOE HOME | SEARCH | WEBSITE OUTLINE FEEDBACK ...

  19. NPS Director's Order | Open Energy Information

    Open Energy Info (EERE)

    NPS Director's Order Author NPS Recipient NPS Published Publisher Not Provided, 02232010 DOI Not Provided Check for DOI availability: http:crossref.org Online Internet...

  20. Implementing Executive Order 13423 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for Federal Agencies on E.O. 13514 Section 12, Federal Fleet Management OVERVIEW OF EXECUTIVE ORDER 13XXX Federal Leadership in Environmental, Energy and Economic Performance

  1. Executive Order 13514: Comprehensive Federal Fleet Management...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Handbook offers guidance on meeting the fleet management requirements outlined in section 12 of Executive Order 13514: Federal Leadership in Environmental, Energy, and Economic ...

  2. Hexagonal Ordering of Nanoparticles | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    electron microscope, researchers can see the hexagonal ordering of nanoparticles in a gold nanoparticle membranes (right). This configuration helps researchers to simulate their...

  3. Consent Order, Brookhaven Science Associates, LLC | Department...

    Energy Savers [EERE]

    Consent Order issued to Brookhaven Science Associates, LLC relating to an electrical shock event that occurred at the Brookhaven National Laboratory. On November 23,...

  4. Plateau Remediation Contract Section J Contract No. DE-AC06-08RL14788 Attachment J.11, Revision 0

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CONTRACT LINE ITEM NUMBER (CLIN) ASSIGNMENT AGAINST CONTRACT STRUCTURE The table entitled, CONTRACT LINE ITEM NUMBER (CLIN) ASSIGNMENT AGAINST CONTRACT STRUCTURE, is included as a separate file. Plateau Remediation Contract Contract No. DE-AC06-08RL14788 ATTACHMENT J-11 CONTRACT LINE ITEM NUMBER (CLIN) ASSIGNMENT AGAINST CONTRACT STRUCTURE Section J Attachment J-11, Revision 2 PRC STATEMENT OF WORK SECTION ASSIGNED WBS ELEMENTS CLIN C.2.1 Transition 013.01 Project Management - PBS RL-13 1 C.2.1

  5. Attachment to Modification M067 BWXT Pantex, LLC Contract No. DE-AC04-00AL66620

    National Nuclear Security Administration (NNSA)

    M067 BWXT Pantex, LLC Contract No. DE-AC04-00AL66620 PX-SEC-J (6-24-04).doc J-App. E-1 PART III - LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS SECTION J - LIST OF ATTACHMENTS APPENDIX E - LIST OF APPLICABLE DIRECTIVES June 24, 2004 Pursuant to the contract clause entitled "Laws, Regulations, and DOE Directives," the following list of Directives is applicable to this contract. Environmental, Safety, and Health (ES&H) requirements for work conducted under this contract have

  6. Attachment to Modification M125 BWXT Pantex, LLC Contract No. DE-AC04-00AL66620

    National Nuclear Security Administration (NNSA)

    M125 BWXT Pantex, LLC Contract No. DE-AC04-00AL66620 PX-SEC-J (01/16/07) J-App. E-1 PART III - LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS SECTION J - LIST OF ATTACHMENTS APPENDIX E - LIST OF APPLICABLE DIRECTIVES January 16, 2007 Pursuant to the contract clause entitled "Laws, Regulations, and DOE Directives," the following list of directives is applicable to this contract. Environmental, Safety, and Health (ES&H) requirements for work conducted under this contract have

  7. Order, chaos and nuclear dynamics: An introduction

    SciTech Connect (OSTI)

    Swiatecki, W.J.

    1990-08-01

    This is an introductory lecture illustrating by simple examples the anticipated effect on collective nuclear dynamics of a transition from order to chaos in the motions of nucleons inside an idealized nucleus. The destruction of order is paralleled by a transition from a rubber-like to a honey-like behaviour of the independent-particle nuclear model. 10 refs., 6 figs.

  8. Attachment L-7a U.S. DEPARTMENT OF ENERGY NATIONAL NUCLEAR SECURITY ADMINISTRATION

    National Nuclear Security Administration (NNSA)

    AM52-08NAXXXXX Task Order No: DT000XXXX Statement of Work August 7, 2015 Task Order Title: Design, Integration, Construction, Communications, and Engineering (DICCE) Services for Port of Cat Lai, Vietnam. Scope: The Contractor shall design, construct, and integrate fully functional portal monitor and communications systems at designated sites in Vietnam.  Port of Cat Lai Requirements Documents: The following task order requirements describe key milestones and deliverables. For a more complete

  9. Direct measurement of the characteristic three-body electron attachment time in the atmospheric air in direct current electric field

    SciTech Connect (OSTI)

    Shutov, A. V.; Smetanin, I. V.; Ionin, A. A.; Levchenko, A. O.; Seleznev, L. V.; Sinitsyn, D. V.; Ustinovskii, N. N.; Zvorykin, V. D.

    2013-07-15

    We report the results of theoretical and experimental study of the characteristic time for three-body attachment of electrons produced by 100 fs UV laser pulse in the atmosphere air in the external DC electric field ranged from 0.2 to 10 kV/cm.

  10. cd ordering | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CD-DVD Ordering System Please complete the following information so the National Energy Technology Lab (NETL) can promptly process your order. Below is a sample of the fields required to order a CD or DVD. If any fields are left blank you may not receive your disk. Data gathered by this form will be used only by the NETL. and will not be distributed for any other purpose. Data transferred via the Internet to this database should not be considered secure. Last Name: Doe First Name: John Middle

  11. Portsmouth Integration Director's Final Findings and Order

    Broader source: Energy.gov [DOE]

    Portsmouth Integration Director's Final Findings and Order purpose is to: integrate the on-site work required for specific units to avoid duplication of effort, and efficiently perform sitewide...

  12. Artisan Manufacturing: Order (2010-CW-0712)

    Broader source: Energy.gov [DOE]

    DOE ordered Artisan Manufacturing Company, Inc., to pay a $5,000 civil penalty after finding Artisan Manufacturing had failed to certify that certain models of faucets comply with the applicable water conservation standard.

  13. Zoe Industries: Order (2010-CW-1405)

    Broader source: Energy.gov [DOE]

    DOE ordered Zoe Industries, Inc. to pay a $5,000 civil penalty after finding Zoe had failed to certify that certain models of showerheads comply with the applicable water conservation standards.

  14. Penguin Toilets: Order (2010-CW-1615)

    Broader source: Energy.gov [DOE]

    DOE ordered Penguin Toilets, LLC to pay a $5,000 civil penalty after finding Penguin Toilets had failed to certify that certain models of water closets comply with the applicable water conservation standards.

  15. American Valve: Order (2010-CW-1411)

    Broader source: Energy.gov [DOE]

    DOE ordered American Valve, Inc. to pay a $5,000 civil penalty after finding American Valve had failed to certify that certain showerhead models comply with the applicable water conservation standards.

  16. Afeel: Order (2010-CW-07/1414)

    Broader source: Energy.gov [DOE]

    DOE ordered Afeel Corporation to pay a $10,000 civil penalty after finding Afeel had failed to certify that certain models of showerheads and faucets comply with the applicable water conservation standards.

  17. Allen Co: Order (2010-CW-0715)

    Broader source: Energy.gov [DOE]

    DOE ordered Allen Co. to pay a $5,000 civil penalty after finding Allen Co. had failed to certify that certain models of faucets comply with the applicable water conservation standards.

  18. AM Conservation: Order (2010-CW-1415)

    Broader source: Energy.gov [DOE]

    DOE ordered AM Conservation Group, Inc. to pay a $5,000 civil penalty after finding AM Conservation had failed to certify that certain models of showerheads comply with the applicable water conservation standards.

  19. Explosive Safety Manual, to a New Order

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2010-12-02

    This memorandum provides justification for the conversion of Department of Energy (DOE) Manual (M) 440.1-1A, DOE Explosives Safety Manual, dated 1-9-06, into a new DOE Order.

  20. Danby Products: Order (2012-CE-1415)

    Broader source: Energy.gov [DOE]

    DOE ordered Danby Products to pay a $9,900 civil penalty after finding Danby had failed to certify that certain models of refrigerators and freezers comply with the applicable energy conservation standard.