National Library of Energy BETA

Sample records for oral ld50 values

  1. Oral Thesis memo_2015

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FROM: Shalom Shlomo DATE: October 12, 2015 RE: Student Oral Thesis Progress Presentations I have scheduled the oral presentations of the graduate students listed below. These...

  2. Value Engineering

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2002-12-30

    To establish Department of Energy (DOE) value engineering policy that establishs and maintains cost-effective value procedures and processes.

  3. VALUE STUDY

    Energy Savers [EERE]

    PREPARED FOR: DEPARTMENT OF ENERGY OFFICE OF CONTRACT RESOURCES AND RESOURCE MANAGEMENT SEPTEMBER 2008 UPDATE BY: AON CONSULTING INC. FEBRUARY 1999 UPDATED SEPTEMBER 29, 2008 VALUE STUDY DESK MANUAL Prepared for: DEPARTMENT OF ENERGY By: BUCK CONSULTANTS Under DE-AC01-96AD38107 Update Prepared for: DOE By: AON CONSULTING, INC. Under Delivery Order DE-BP01-08MA345678, Contract No. DE-AB01-08-ME11881 Contents PART I Overview of Value Study Illustrative Flow

  4. Value Engineering

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-01-07

    To establish Department of Energy (DOE) value engineering policy that meets the requirements of Public Law 104-106, Section 4306 as codified by 41 United States Code 432. Canceled by DOE N 251.94. Does not cancel other directives.

  5. Sandia Energy - PV Value

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PV Value Home Stationary Power Energy Conversion Efficiency Solar Energy Photovoltaics Solar Market Transformation PV Value PV ValueTara Camacho-Lopez2015-06-12T20:36:38+00:0...

  6. VALUE STUDY | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    VALUE STUDY More Documents & Publications Contractor Human Resources Management VALUE STUDY Value Study Desk Manual...

  7. PV Value®

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... For appraisers, the inputs specific to PV in the Residential Green and Energy Efficient Addendum can be used as inputs to PV Value. Valuing a PV system is done using an income ...

  8. VALUE STUDY | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    VALUE STUDY VALUE STUDY PDF icon VALUE STUDY More Documents & Publications Contractor Human Resources Management VALUE STUDY Value Study Desk Manual

  9. PV Value®

    Broader source: Energy.gov [DOE]

    PV Value® is a free solar PV Valuation tool that answers the question of "How much is solar PV worth" and is compliant with the Uniform Standards of Professional Appraisal Practice. It is available for and being used by real estate appraisers, realtors, homeowners, commercial building owners, home builders, solar installers, green raters, insurance companies, and mortgage lenders in all 50 states along with D.C. and Puerto Rico. PV Value® allows for the calculation of both the cost and income approach to value and was endorsed by the largest appraiser trade organization, the "Appraisal Institute," as an innovative approach to valuing solar assets.

  10. Hanford Advisory Board Values

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of work are fundamental core values. Workers should receive appropriate training and programs should be in place to ensure a safety-conscious work environment, without...

  11. High coking value pitch

    SciTech Connect (OSTI)

    Miller, Douglas J.; Chang, Ching-Feng; Lewis, Irwin C.; Lewis, Richard T.

    2014-06-10

    A high coking value pitch prepared from coal tar distillate and has a low softening point and a high carbon value while containing substantially no quinoline insolubles is disclosed. The pitch can be used as an impregnant or binder for producing carbon and graphite articles.

  12. VALUE ENGINEERING.PDF

    Energy Savers [EERE]

    6 I N S P E C T I O N R E P O R T U.S. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL OFFICE OF INSPECTIONS FOLLOW-ON INSPECTION OF THE DEPARTMENT OF ENERGY'S VALUE ENGINEERING PROGRAM DECEMBER 2001 U.S. DEPARTMENT OF ENERGY Washington, DC 20585 December 20, 2001 MEMORANDUM FOR THE SECRETARY FROM: Gregory H. Friedman /s/ Inspector General SUBJECT: INFORMATION: Report on "Follow-on Inspection of the Department of Energy's Value Engineering Program" BACKGROUND Value Engineering is a

  13. Photovoltaics Value Analysis

    SciTech Connect (OSTI)

    Contreras, J.L.; Frantzis, L.; Blazewicz, S.; Pinault, D.; Sawyer, H.

    2008-02-01

    The goals of this report are to identify best practices in methodologies for estimating the value of distributed PV technologies, identify gaps in existing knowledge, and outline R&D opportunities.

  14. Value of Information References

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Morency, Christina

    This file contains a list of relevant references on value of information (VOI) in RIS format. VOI provides a quantitative analysis to evaluate the outcome of the combined technologies (seismology, hydrology, geodesy) used to monitor Brady's Geothermal Field.

  15. Value of Information References

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Morency, Christina

    2014-12-12

    This file contains a list of relevant references on value of information (VOI) in RIS format. VOI provides a quantitative analysis to evaluate the outcome of the combined technologies (seismology, hydrology, geodesy) used to monitor Brady's Geothermal Field.

  16. Earned Value Management

    Broader source: Energy.gov [DOE]

    Earned Value Management (EVM) is a systematic approach to the integration and measurement of cost, schedule, and technical (scope) accomplishments on a project or task. It provides both the...

  17. HSEP Value Statement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7/9/2012 HSEP Value Statement Safe and environmentally conscious performance of work is our fundamental core value. Integrated Safety Management should be used as the principal vehicle to protect the worker and the environment, and to guide work planning of all types. This includes practicing the proper principles of behavior conducive to a positive safety culture and incorporating safety and environmental risk identification and mitigation in facility designs. Workers should receive appropriate

  18. DOE-HDBK-1122-99 Radiological Control Technical Training, Oral...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    .........1 Purpose of Oral Examinations ............1 Participation in Oral Examination Boards......

  19. Table 2. Value and average value of photovoltaic module shipments...

    U.S. Energy Information Administration (EIA) Indexed Site

    Value and average value of photovoltaic module shipments, 2013" "Module value, total ... Administration, Form EIA-63B, 'Annual Photovoltaic CellModule Shipments Report' Note: ...

  20. Value Study Desk Manual

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    VALUE STUDY DESK MANUAL PREPARED FOR: DEPARTMENT OF ENERGY Office of Contractor Human Resources Policy Division September 26, 2012 UPDATE VALUE STUDY DESK MANUAL Prepared for: DEPARTMENT OF ENERGY By: BUCK CONSULTANTS Under DE-AC01-96AD38107 Update Prepared for: DOE By: AON CONSULTING, INC. Under Delivery Order DE-BP01-08MA345678, Contract No. DE-AB01-08-ME11881 September 28, 2008 Update Prepared for: DOE By: Aon Hewitt Inc. Under Delivery Order DE-BP01-08MA345678, Contract No.

  1. Value of Information spreadsheet

    SciTech Connect (OSTI)

    Trainor-Guitton, Whitney

    2014-05-12

    This spreadsheet represents the information posteriors derived from synthetic data of magnetotellurics (MT). These were used to calculate value of information of MT for geothermal exploration. Information posteriors describe how well MT was able to locate the "throat" of clay caps, which are indicative of hidden geothermal resources. This data is full explained in the peer-reviewed publication: Trainor-Guitton, W., Hoversten, G. M., Ramirez, A., Roberts, J., Jlusson, E., Key, K., Mellors, R. (Sept-Oct. 2014) The value of spatial information for determining well placement: a geothermal example, Geophysics.

  2. Microsoft Word - Oral Thesis memo_2010

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MEMORANDUM TO: Faculty, Research Staff, and Graduate Students FROM: Shalom Shlomo DATE: October 28, 2010 RE: Student Oral Thesis Progress Presentations I have scheduled the oral presentations (time = 20 + 5 min) of the graduate students listed below. These students are asked to submit their writing 1-2 page thesis progress report to Leslie Speikes at least two weeks prior to the presentation. The report, written in consultation with the thesis advisor, should describe the proposed investigation,

  3. PV Value®

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Value® - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced Nuclear Energy

  4. Core Values | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Core Values What we do and how we do it is determined by our core values. Our core values are how we operate and what we value most. They are the qualities that define our culture...

  5. Economic Values | Open Energy Information

    Open Energy Info (EERE)

    Economic Values Jump to: navigation, search Retrieved from "http:en.openei.orgwindex.php?titleEconomicValues&oldid612356...

  6. Social Values | Open Energy Information

    Open Energy Info (EERE)

    Social Values Jump to: navigation, search Retrieved from "http:en.openei.orgwindex.php?titleSocialValues&oldid612345...

  7. Prestack mid-value filtering

    SciTech Connect (OSTI)

    Changlian, X. )

    1992-01-01

    This paper describes mid-value filtering, a specific nonlinear smoothing filtering, and widely used in graphic processing, etc. Mid-value filtering before stack of seismic data can remove wild value (inconceivable particular big value) and improve signal-noise ratio. In view of big data volume before stack, computation efficiency of mid-value filtering is critical to its feasibility. The algorithm used here is sufficiently based on the properties of mid-value filtering, so that the computation efficiency is greatly improved. It is experimentally shown that prestack mid-value filtering can quite well eliminate wild value, abnormal traces as well as surface waves, and raise signal-noise ratio. After lateral low frequency noises are removed by high pass filtering, mid-value filtering works better.

  8. PV Value | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PV Value is a web-based tool that calculates the energy production value for a residential or commercial photovoltaic (PV) system. The tool is Uniform Standards of Progressional ...

  9. Earned Value Management System (EVMS)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2012-03-13

    This Guide provides approaches for implementing the Earned Value Management System (EVMS) requirements of DOE O 413.3B. Supersedes DOE G 413.3-10.

  10. Quantum physics and human values

    SciTech Connect (OSTI)

    Stapp, H.P.

    1989-09-01

    This report discusses the following concepts: the quantum conception of nature; the quantum conception of man; and the impact upon human values. (LSP).

  11. Human radiation studies: Remembering the early years. Oral history...

    Office of Scientific and Technical Information (OSTI)

    G. Whaley, August 15, 1994 Citation Details In-Document Search Title: Human radiation studies: Remembering the early years. Oral history of Donner Lab Administrator Baird G. ...

  12. Recommendation 169: Establishment of an Oak Ridge Oral History Program

    Broader source: Energy.gov [DOE]

    The ORSSAB recommends DOE-ORO fully endorse the establishment of an Oak Ridge Oral History Program and provide necessary assistance.

  13. DOE handbook: Guide to good practices for oral examinations

    SciTech Connect (OSTI)

    1997-09-01

    The purpose of this handbook is to provide DOE nuclear facilities (and others) with guidance that can be used to incorporate oral examination techniques and processes into their training programs. The handbook was developed on the basis of experience in the nuclear industry and incorporates information from civilian, military, commercial, and DOE nuclear sources. Different types of oral examinations are addressed and discussed, including informal, formal, checkouts, facility walkthroughs, operational examinations, and performance demonstrations. Guidelines for administering and grading oral examinations are provided for conducting consistent and reliable oral examinations. 1 tab.

  14. Earned Value Management System (EVMS)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2012-03-13

    To support DOE's initiatives to improve program, project, and contract management through the implementation and surveillance of a contractor's Earned Value Management System (EVMS) that is in conformance with DOE O 413.3B, Program and Project Management for the Acquisition of Capital Assets, the American National Standards Institute/Electronic Industries Alliance (ANSI/EIA)-748-B, Earned Value Management System (or as required by contract), and Federal Acquisition Regulation (FAR) 52.234-4, Earned Value Management System (EVMS). Admin Chg 1 dated 10-22-2015.

  15. CMI Values | Critical Materials Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Values CMI Values -- we listen, we are safe, we collaborate, we respect, we move fast, we are agile, we are responsible, and we deliver. We Listen: We are driven by the needs of technology and our best information comes from our industry partners. We Are Safe: We conduct all of our work in a manner that protects our workers, the public and the environment. We Collaborate: We bring together the best available expertise to solve the problems at hand. We Respect: We treat each other well and value

  16. Earned Value Management System (EVMS)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-05-06

    The Guide supports the Departments initiatives to improve program, project, and contract management through the implementation and surveillance of contractors earned value management systems. Canceled by DOE G 413.3-10A.

  17. Core Values | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Core Values Core Values People - People are our most important resource. We respect and use our experience and skills and appreciate our diversity. Business Excellence - We are fiscally responsible and actively pursue best business practices. Safety - We protect our human and material resources and promote safe work practices within the office and at our sites. Communication - We take full advantage of our virtual organization's strengths and share information freely across all levels of the

  18. VariableR reclustering in multiple top quark events - Oral Presentatio...

    Office of Scientific and Technical Information (OSTI)

    VariableR reclustering in multiple top quark events - Oral Presentation Citation Details In-Document Search Title: VariableR reclustering in multiple top quark events - Oral...

  19. Photovoltaics Value Clearinghouse | Open Energy Information

    Open Energy Info (EERE)

    Photovoltaics Value Clearinghouse Jump to: navigation, search The Photovoltaics Value Clearinghouse was developed by NREL and Clean Power Research.1 The PV Value Clearinghouse is...

  20. core values | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Blog Home core values core values Livermore Field Office sets core values as part of continuous improvement process At their recent off-site continuous improvement session,...

  1. Process for recovering actinide values

    DOE Patents [OSTI]

    Horwitz, E. Philip; Mason, George W.

    1980-01-01

    A process for rendering actinide values recoverable from sodium carbonate scrub waste solutions containing these and other values along with organic compounds resulting from the radiolytic and hydrolytic degradation of neutral organophosphorous extractants such as tri-n butyl phosphate (TBP) and dihexyl-N,N-diethyl carbamylmethylene phosphonate (DHDECAMP) which have been used in the reprocessing of irradiated nuclear reactor fuels. The scrub waste solution is preferably made acidic with mineral acid, to form a feed solution which is then contacted with a water-immiscible, highly polar organic extractant which selectively extracts the degradation products from the feed solution. The feed solution can then be processed to recover the actinides for storage or recycled back into the high-level waste process stream. The extractant is recycled after stripping the degradation products with a neutral sodium carbonate solution.

  2. ADSORPTION METHOD FOR SEPARATING THORIUM VALUES FROM URANIUM VALUES

    DOE Patents [OSTI]

    Boyd, G.E.; Russell, E.R.; Schubert, J.

    1959-08-01

    An improved ion exchange method is described for recovery of uranium and thorium values as separate functions from an aqueous acidic solution containing less than 10/sup -3/ M thorium ions and between 0.1 and 1 M uranyl ions. The solution is passed through a bed of cation exchange resin in the acid form to adsorb all the thorium ions and a portion of the uranyl ions. The uranium is eluted by means of aqueous 0.1 to 0.4 M sulfuric acid. The thorium may then be stripped from the resin by elution with aqueous 0.5 M oxalic acid.

  3. Core Values Postcard | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Core Values Postcard Document Number: NA Effective Date: 09/2014 File (public): PDF icon Print_CoreValuesPostcard

  4. Value Study Desk Manual | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Value Study Desk Manual Value Study Desk Manual Updated September 26, 2012. PDF icon Memo from Robert Myers regarding DOE Benefit Value Desk Manual PDF icon Value Study Desk Manual More Documents & Publications Contractor Human Resources Management VALUE STUDY VALUE STUDY

  5. Microsoft Word - Oral Thesis memo2_2011_octrev

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MEMORANDUM TO: Faculty, Research Staff, and Graduate Students FROM: Shalom Shlomo DATE: October 27, 2011 RE: Student Oral Thesis Progress Presentations--REVISED I have scheduled the oral presentations of the graduate students listed below. These students are asked to submit their writing 1-2 page thesis progress report to Leslie Speikes at least two weeks prior to the presentation. The report, written in consultation with the thesis advisor, should describe the proposed investigation, the

  6. Microsoft Word - Oral Thesis memo_2013R3

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    TO: Faculty, Research Staff, and Graduate Students FROM: Shalom Shlomo DATE: November 1 2013-REVISED3 RE: Student Oral Thesis Progress Presentations I have scheduled the oral presentations of the graduate students listed below. These students are asked to submit their written 1-2 page thesis progress report by e-mail to me and to Paula Barton at least two weeks prior to the presentation. The report, written in consultation with the thesis advisor, should describe the proposed investigation, the

  7. Microsoft Word - Oral Thesis memo_Rev_2012-1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MEMORANDUM TO: Faculty, Research Staff, and Graduate Students FROM: Shalom Shlomo DATE: October 11, 2012 RE: Student Oral Thesis Progress Presentations I have scheduled the oral presentations of the graduate students listed below. These students are asked to submit their written 1-2 page thesis progress report by e-mail to me and to Leslie Speikes at least two weeks prior to the presentation. The report, written in consultation with the thesis advisor, should describe the proposed investigation,

  8. Shale Oil Value Enhancement Research

    SciTech Connect (OSTI)

    James W. Bunger

    2006-11-30

    Raw kerogen oil is rich in heteroatom-containing compounds. Heteroatoms, N, S & O, are undesirable as components of a refinery feedstock, but are the basis for product value in agrochemicals, pharmaceuticals, surfactants, solvents, polymers, and a host of industrial materials. An economically viable, technologically feasible process scheme was developed in this research that promises to enhance the economics of oil shale development, both in the US and elsewhere in the world, in particular Estonia. Products will compete in existing markets for products now manufactured by costly synthesis routes. A premium petroleum refinery feedstock is also produced. The technology is now ready for pilot plant engineering studies and is likely to play an important role in developing a US oil shale industry.

  9. Chapter 48 - Value Engineering | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    8 - Value Engineering Chapter 48 - Value Engineering PDF icon 48ValueEngineering0.pdf More Documents & Publications Audit Report: OAS-L-07-08 Emerging Lighting Technology...

  10. Earned Value Management | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services » Earned Value Management Earned Value Management Earned Value Management The mission of the DOE Earned Value Management website is to educate and train on theory and practice of Earned Value Management, and use it as an integrated Project Management process. Earned Value Management (EVM) is a systematic approach to the integration and measurement of cost, schedule, and technical (scope) accomplishments on a project or task. It provides both the government and contractors the ability

  11. HANDBOOK FOR CONDUCTING ORAL HISTORY INTERVIEWS RELATED TO TRIBAL AND INDIAN PARTICIPATION IN THE CONSTRUCTION, OPERATION AND CLEANUP OF THE NUCLEAR WEAPONS COMPLEX

    SciTech Connect (OSTI)

    Cristann Gibson; Mervyn L. Tano; Albert Wing

    1999-08-31

    There were three major projects undertaken at the outset of the DOE/EM 22 Cooperative Agreement back in September 1995. There was a project relating to Tribal oral histories. Another project of the Cooperative Agreement related to technology and Tribal values and needs. This project by analogy could apply to issues of technology, environmental cleanup and other indigenous peoples internationally. How can Indian Tribes participate in defining the need for technology development rather than merely learning to adapt themselves and their situations and values to technology developed by others with differing needs, values and economic resources? And the third project was the placement of a Tribal intern in EM-22.

  12. Doppler Lidar Wind Value-Added Product

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 Doppler Lidar Wind Value-Added Product RK Newsom C Sivaraman TR Shippert LD Riihimaki ... DOESC-ARMTR-148 Doppler Lidar Wind Value-Added Product Version 1.0 RK Newsom C Sivaraman ...

  13. Boron biodistribution for BNCT in the hamster cheek pouch oral cancer model: Combined administration of BSH and BPA

    SciTech Connect (OSTI)

    D.W. Nigg; William Bauer; Various Others

    2014-06-01

    Sodium mercaptoundecahydro-closo-dodecaborate (BSH) is being investigated clinically for BNCT. We examined the biodistribution of BSH and BPA administered jointly in different proportions in the hamster cheek pouch oral cancer model. The 3 assayed protocols were non-toxic, and showed preferential tumor boron uptake versus precancerous and normal tissue and therapeutic tumor boron concentration values (7085 ppm). All 3 protocols warrant assessment in BNCT studies to contribute to the knowledge of (BSH+BPA)-BNCT radiobiology for head and neck cancer and optimize therapeutic efficacy.

  14. Value of Information Evaluation using Field Data

    SciTech Connect (OSTI)

    Trainor-Guitton, W.

    2015-06-15

    Value of information (VOI) provides the ability to identify and prioritize useful information gathering for a geothermal prospect, either hydrothermal or for enhanced geothermal systems. Useful information provides a value greater than the cost of the information; wasteful information costs more than the expected value of the information. In this project we applied and refined VOI methodologies on selected geothermal prospects.

  15. Analytic Challenges to Valuing Energy Storage

    SciTech Connect (OSTI)

    Ma, Ookie; O'Malley, Mark; Cheung, Kerry; Larochelle, Philippe; Scheer, Rich

    2011-10-25

    Electric grid energy storage value. System-level asset focus for mechanical and electrochemical energy storage. Analysis questions for power system planning, operations, and customer-side solutions.

  16. Solar Energy and Capacity Value (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-09-01

    This is a one-page, two-sided fact sheet on the capacity of solar power to provide value to utilities and power system operators.

  17. Austin Energy- Value of Solar Residential Rate

    Broader source: Energy.gov [DOE]

    Note: In August 2014, the City Council of Austin, Texas, enacted Resolution No. 20140828, which directed program changes to the Value of Solar Tariff as follows:

  18. Photovoltaics Value Analysis | Open Energy Information

    Open Energy Info (EERE)

    Tool Summary LAUNCH TOOL Name: Photovoltaics Value Analysis Focus Area: Renewable Energy Topics: Environmental Website: www.nrel.govanalysispdfs42303.pdf Equivalent URI:...

  19. Capacity Value of Concentrating Solar Power Plants

    SciTech Connect (OSTI)

    Madaeni, S. H.; Sioshansi, R.; Denholm, P.

    2011-06-01

    This study estimates the capacity value of a concentrating solar power (CSP) plant at a variety of locations within the western United States. This is done by optimizing the operation of the CSP plant and by using the effective load carrying capability (ELCC) metric, which is a standard reliability-based capacity value estimation technique. Although the ELCC metric is the most accurate estimation technique, we show that a simpler capacity-factor-based approximation method can closely estimate the ELCC value. Without storage, the capacity value of CSP plants varies widely depending on the year and solar multiple. The average capacity value of plants evaluated ranged from 45%?90% with a solar multiple range of 1.0-1.5. When introducing thermal energy storage (TES), the capacity value of the CSP plant is more difficult to estimate since one must account for energy in storage. We apply a capacity-factor-based technique under two different market settings: an energy-only market and an energy and capacity market. Our results show that adding TES to a CSP plant can increase its capacity value significantly at all of the locations. Adding a single hour of TES significantly increases the capacity value above the no-TES case, and with four hours of storage or more, the average capacity value at all locations exceeds 90%.

  20. Earned Value Management | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    development. DOE EVMS Risk Assessment Matrix - (MS Word) Formulas and Terminology "Gold Card" - September 2011 Road Show Presentation: Enhancing Earned Value (EV) Analysis Using ...

  1. ZERH Architect Training: Understanding the Value, Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Architect Training: Understanding the Value, Technology and Benefits of the Zero Energy ... Consumer demand for market options that offer improved comfort, health, safety, resale ...

  2. Shared Value in Utility and Efficiency Partnerships

    Broader source: Energy.gov [DOE]

    Residential Energy Efficiency Solutions Conference: Shared Value in Utility and Efficiency Partnerships, July 10, 2012. Presents four case studies highlighting partnerships between local utilities and energy efficiency programs.

  3. Analytic Challenges to Valuing Energy Storage

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    analytical task. Market Conditions - Markets are continually evolving, and the long-term value of energy storage is difficult to capture. Niche markets have emerged, but...

  4. Applying vitrification to meet customers` values

    SciTech Connect (OSTI)

    Roy, B. [Scientific Ecology Group, Inc., Oak Ridge, TN (United States)

    1996-03-01

    Cost-effective waste management solutions that maximize customer value require a thorough and flexible evaluation and integration of approaches, technology applications, and disposal options. This is particulary true in the application of vitrification to low-level radioactive and mixed waste stabilization. Case-specific evaluations are the required to determine the highest value, most cost-effective approaches.

  5. Earned Value Management | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Earned Value Management Earned Value Management The U.S. Department of Energy (DOE) uses Earned Value Management (EVM) as a project management tool that measures actual performance of work scope and the associated cost and schedule compared to the approved baseline plan for the project. EVM has proven to be a valuable tool for project managers and is now being used in a wide variety of government contracts and in much of the private sector as well. For most construction and cleanup projects, DOE

  6. ARM - Value-Added Products (VAP)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Products (VAP) VAP Update Information on new, existing, and future value-added products for July l-September 30, 2015 is now available. Have a VAP idea? Use this form to let us know. Value-Added Products (VAP) Many of the scientific needs of the ARM Climate Research Facility are met through the analysis and processing of existing data products into "value-added" products, or VAPs. Despite extensive instrumentation deployed at the ARM sites, there will always be quantities of interest

  7. Chapter 48 - Value Engineering | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    48ValueEngineering0.pdf More Documents & Publications Audit Report: OAS-L-07-08 Emerging Lighting Technology Microsoft PowerPoint - 12 Holman White PM Conference 2010 Rev 2...

  8. ARM - Value-Added Product Status Reports

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Status Reports Publications Journal Articles Conference Documents Program Documents Technical Reports Publications Database Public Information Materials Image Library Videos Publication Resources Submit a Publication Publishing Procedures ARM Style Guide (PDF, 448KB) Acronyms Glossary Logos Contacts RSS for Publications Value-Added Product Status Reports ARM Climate Research Facility Quarterly Value-Added Product Report July 1-September 30, 2015 (PDF, 1MB) ARM Climate Research Facility Quarterly

  9. Potential value of Cs-137 capsules

    SciTech Connect (OSTI)

    Bloomster, C.H.; Brown, D.R.; Bruno, G.A.; Hazelton, R.F.; Hendrickson, P.L.; Lezberg, A.J.; Tingey, G.L.; Wilfert, G.L.

    1985-04-01

    We determined the value of Cs-137 compared to Co-60 as a source for the irradiation of fruit (apples and cherries), pork and medical supplies. Cs-137, in the WESF capsule form, had a value of approximately $0.40/Ci as a substitute for Co-60 priced at approximately $1.00/Ci. The comparison was based on the available curies emitted from the surface of each capsule. We developed preliminary designs for fourteen irradiation facilities; seven were based on Co-60 and seven were based on Cs-137. These designs provided the basis for estimating capital and operating costs which, in turn, provided the basis for determining the value of Cs-137 relative to Co-60 in these applications. We evaluated the effect of the size of the irradiation facility on the value of Cs-137. The cost of irradiation is low compared to the value of the product. Irradiation of apples for disinfestation costs $.01 to .02 per pound. Irradiation for trichina-safe pork costs $.02 per pound. Irradiation of medical supplies for sterilization costs $.07 to .12 per pound. The cost of the irradiation source, either Co-60 or Cs-137, contributed only a minor amount to the total cost of irradiation, about 5% for the fruit and hog cases and about 20% for the medical supply cases. We analyzed the sensitivity of the irradiation costs and Cs-137 value to several key assumptions.

  10. Microfabricated fuel heating value monitoring device

    DOE Patents [OSTI]

    Robinson, Alex L.; Manginell, Ronald P.; Moorman, Matthew W.

    2010-05-04

    A microfabricated fuel heating value monitoring device comprises a microfabricated gas chromatography column in combination with a catalytic microcalorimeter. The microcalorimeter can comprise a reference thermal conductivity sensor to provide diagnostics and surety. Using microfabrication techniques, the device can be manufactured in production quantities at a low per-unit cost. The microfabricated fuel heating value monitoring device enables continuous calorimetric determination of the heating value of natural gas with a 1 minute analysis time and 1.5 minute cycle time using air as a carrier gas. This device has applications in remote natural gas mining stations, pipeline switching and metering stations, turbine generators, and other industrial user sites. For gas pipelines, the device can improve gas quality during transfer and blending, and provide accurate financial accounting. For industrial end users, the device can provide continuous feedback of physical gas properties to improve combustion efficiency during use.

  11. Value of Energy Storage for Grid Applications

    SciTech Connect (OSTI)

    Denholm, P.; Jorgenson, J.; Hummon, M.; Jenkin, T.; Palchak, D.; Kirby, B.; Ma, O.; O'Malley, M.

    2013-05-01

    This analysis evaluates several operational benefits of electricity storage, including load-leveling, spinning contingency reserves, and regulation reserves. Storage devices were simulated in a utility system in the western United States, and the operational costs of generation was compared to the same system without the added storage. This operational value of storage was estimated for devices of various sizes, providing different services, and with several sensitivities to fuel price and other factors. Overall, the results followed previous analyses that demonstrate relatively low value for load-leveling but greater value for provision of reserve services. The value was estimated by taking the difference in operational costs between cases with and without energy storage and represents the operational cost savings from deploying storage by a traditional vertically integrated utility. The analysis also estimated the potential revenues derived from a merchant storage plant in a restructured market, based on marginal system prices. Due to suppression of on-/off-peak price differentials and incomplete capture of system benefits (such as the cost of power plant starts), the revenue obtained by storage in a market setting appears to be substantially less than the net benefit provided to the system. This demonstrates some of the additional challenges for storage deployed in restructured energy markets.

  12. Value Creation Through Integrated Networks and Convergence

    SciTech Connect (OSTI)

    De Martini, Paul; Taft, Jeffrey D.

    2015-04-01

    Customer adoption of distributed energy resources and public policies are driving changes in the uses of the distribution system. A system originally designed and built for one-way energy flows from central generating facilities to end-use customers is now experiencing injections of energy from customers anywhere on the grid and frequent reversals in the direction of energy flow. In response, regulators and utilities are re-thinking the design and operations of the grid to create more open and transactive electric networks. This evolution has the opportunity to unlock significant value for customers and utilities. Alternatively, failure to seize this potential may instead lead to an erosion of value if customers seek to defect and disconnect from the system. This paper will discuss how current grid modernization investments may be leveraged to create open networks that increase value through the interaction of intelligent devices on the grid and prosumerization of customers. Moreover, even greater value can be realized through the synergistic effects of convergence of multiple networks. This paper will highlight examples of the emerging nexus of non-electric networks with electricity.

  13. The Business Value of Superior Energy Performance

    SciTech Connect (OSTI)

    McKane, Aimee; Scheihing, Paul; Evans, Tracy; Glatt, Sandy; Meffert, William

    2015-08-04

    Industrial facilities participating in the U.S. Department of Energy’s (US DOE) Superior Energy Performance (SEP) program are finding that it provides them with significant business value. This value starts with the implementation of ISO 50001-Energy management system standard, which provides an internationally-relevant framework for integration of energy management into an organization’s business processes. The resulting structure emphasizes effective use of available data and supports continual improvement of energy performance. International relevance is particularly important for companies with a global presence or trading interests, providing them with access to supporting ISO standards and a growing body of certified companies representing the collective knowledge of communities of practice. This paper examines the business value of SEP, a voluntary program that builds on ISO 50001, inviting industry to demonstrate an even greater commitment through third-party verification of energy performance improvement to a specified level of achievement. Information from 28 facilities that have already achieved SEP certification will illustrate key findings concerning both the value and the challenges from SEP/ISO 50001 implementation. These include the facilities’ experience with implementation, internal and external value of third-party verification of energy performance improvement; attractive payback periods and the importance of SEP tools and guidance. US DOE is working to bring the program to scale, including the Enterprise-Wide Accelerator (SEP for multiple facilities in a company), the Ratepayer-Funded Program Accelerator (supporting tools for utilities and program administrators to include SEP in their program offerings), and expansion of the program to other sectors and industry supply chains.

  14. Determine and Communicate the Value of Replication | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Communicate the Value of Replication Determine and Communicate the Value of Replication This presentation shares how to determine and later communicate the value of ...

  15. MULTIDENTATE TEREPHTHALAMIDATE AND HYDROXYPYRIDONATE LIGANDS: TOWARDS NEW ORALLY ACTIVE CHELATORS

    SciTech Connect (OSTI)

    Abergel, Rebecca J.; Raymond, Kenneth N.

    2011-07-13

    The limitations of current therapies for the treatment of iron overload or radioisotope contamination have stimulated efforts to develop new orally bioavailable iron and actinide chelators. Siderophore-inspired tetradentate, hexadentate and octadentate terephthalamidate and hydroxypyridonate ligands were evaluated in vivo as selective and efficacious iron or actinide chelating agents, with several metal loading and ligand assessment procedures, using {sup 59}Fe, {sup 238}Pu, and {sup 241}Am as radioactive tracers. The compounds presented in this study were compared to commercially available therapeutic sequestering agents [deferoxamine (DFO) for iron and diethylenetriaminepentaacetic acid (DPTA) for actinides] and are unrivaled in terms of affinity, selectivity and decorporation efficacy, which attests to the fact that high metal affinity may overcome the low bioavailability properties commonly associated to multidenticity.

  16. Value Streams in Microgrids: A literature Review

    SciTech Connect (OSTI)

    Stadler, Michael; Cardoso, Gonçalo; Mashayekh, Salman; Forget, Thibault; DeForest, Nicholas; Agarwal, Ankit; Schönbein, Anna

    2015-10-01

    Microgrids are an increasingly common component of the evolving electricity grids with the potential to improve local reliability, reduce costs, and increase penetration rates for distributed renewable generation. The additional complexity of microgrids often leads to increased investment costs, creating a barrier for widespread adoption. These costs may result directly from specific needs for islanding detection, protection systems and power quality assurance that would otherwise be avoided in simpler system configurations. However, microgrids also facilitate additional value streams that may make up for their increased costs and improve the economic viability of microgrid deployment. This paper analyses the literature currently available on research relevant to value streams occurring in microgrids that may contribute to offset the increased investment costs. A review on research related to specific microgrid requirements is also presented.

  17. ARM KAZR-ARSCL Value Added Product

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Jensen, Michael

    The Ka-band ARM Zenith Radars (KAZRs) have replaced the long-serving Millimeter Cloud Radars, or MMCRs. Accordingly, the primary MMCR Value Added Product (VAP), the Active Remote Sensing of CLouds (ARSCL) product, is being replaced by a KAZR-based version, the KAZR-ARSCL VAP. KAZR-ARSCL provides cloud boundaries and best-estimate time-height fields of radar moments.

  18. PROCESS OF SEPARATING PLUTONIUM VALUES BY ELECTRODEPOSITION

    DOE Patents [OSTI]

    Whal, A.C.

    1958-04-15

    A process is described of separating plutonium values from an aqueous solution by electrodeposition. The process consists of subjecting an aqueous 0.1 to 1.0 N nitric acid solution containing plutonium ions to electrolysis between inert metallic electrodes. A current density of one milliampere io one ampere per square centimeter of cathode surface and a temperature between 10 and 60 d C are maintained. Plutonium is electrodeposited on the cathode surface and recovered.

  19. ARM KAZR-ARSCL Value Added Product

    SciTech Connect (OSTI)

    Jensen, Michael

    2012-09-28

    The Ka-band ARM Zenith Radars (KAZRs) have replaced the long-serving Millimeter Cloud Radars, or MMCRs. Accordingly, the primary MMCR Value Added Product (VAP), the Active Remote Sensing of CLouds (ARSCL) product, is being replaced by a KAZR-based version, the KAZR-ARSCL VAP. KAZR-ARSCL provides cloud boundaries and best-estimate time-height fields of radar moments.

  20. Merged Sounding Value-Added Product

    SciTech Connect (OSTI)

    Troyan, D

    2010-03-03

    The Merged Sounding value-added product (VAP) uses a combination of observations from radiosonde soundings, the microwave radiometer (MWR), surface meteorological instruments, and European Centre for Medium-Range Weather Forecasts (ECMWF) model output with a sophisticated scaling/interpolation/smoothing scheme in order to define profiles of the atmospheric thermodynamic state at one-minute temporal intervals and a total of 266 altitude levels.

  1. ARM - Value-Added Products - Status

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    - Status Report Expand Orange | Expand Blue | Expand Green | Collapse All See Legend for Data Availability explanation. ARM - Value-Added Products - Status Last Update: March 21 2016 19:00:50 +/- Vap Name Translator Developer Frequency Tier Producer Data Availability ACRED (ARM Cloud Retrieval Ensemble Data) Shaocheng Xie Chuanfeng Zhao, Renata Mc Coy Periodically Evaluation Developer ARM Overview: Developer Description: The ARM Cloud Retrieval Ensemble Dataset (ACRED) is a multi-year cloud

  2. Survey to determine the value of DYNA

    SciTech Connect (OSTI)

    Walter, J.W.; Bellshaw, D.

    1993-01-01

    This report presents the value of the DYNA software program to US Industry. The software conducts dynamic finite element analysis tailored specifically to simulating high energy impacts, such as car crashes or aircraft collisions with birds. DYNA is available at nearly zero cost to the public in two-dimensional (DYNA2D) and three-dimensional versions (DYNA3D). DYNA has had a major impact on US industry. Measuring this impact using conventional approaches, such as profitability or revenue size, does not apply to DYNA. A new approach is needed that will capture DYNA's value to US industry. Our challenge was two fold: (1) to develop a methodology for valuing technology transferred to the public domain; and (2) to apply this methodology to DYNA. We accomplished the evaluation task by using indirect measurements of value. These indicators encompassed three broad categories, answering three key questions: (1) Use of DYNA and DYNA-like'' codes: Are companies, academic institutions, government agencies actually using DYNA and codes like it (2) Savings generated from using these codes: Is the use of DYNA and codes like it creating a positive economic impact (3) Market size of afl DYNA-like'' codes: Has a commercial market developed for DYNA-like'' codes This study represents the results of interviews with people identified by Lawrence Livermore National Laboratory (LLNL) as users of DYNA. Some of the people surveyed for this study do not use DYNA. They rely upon other dynamic finite element analysis codes. We refer to these individuals as users of DYNA-like'' codes or codes like DYNA.'' Several of the DYNA-like'' codes used DYNA as their core. These codes are descendants of DYNA.

  3. Survey to determine the value of DYNA

    SciTech Connect (OSTI)

    Walter, J.W.; Bellshaw, D.

    1993-01-01

    This report presents the value of the DYNA software program to US Industry. The software conducts dynamic finite element analysis tailored specifically to simulating high energy impacts, such as car crashes or aircraft collisions with birds. DYNA is available at nearly zero cost to the public in two-dimensional (DYNA2D) and three-dimensional versions (DYNA3D). DYNA has had a major impact on US industry. Measuring this impact using conventional approaches, such as profitability or revenue size, does not apply to DYNA. A new approach is needed that will capture DYNA`s value to US industry. Our challenge was two fold: (1) to develop a methodology for valuing technology transferred to the public domain; and (2) to apply this methodology to DYNA. We accomplished the evaluation task by using indirect measurements of value. These indicators encompassed three broad categories, answering three key questions: (1) Use of DYNA and ``DYNA-like`` codes: Are companies, academic institutions, government agencies actually using DYNA and codes like it? (2) Savings generated from using these codes: Is the use of DYNA and codes like it creating a positive economic impact (3) Market size of afl ``DYNA-like`` codes: Has a commercial market developed for ``DYNA-like`` codes? This study represents the results of interviews with people identified by Lawrence Livermore National Laboratory (LLNL) as users of DYNA. Some of the people surveyed for this study do not use DYNA. They rely upon other dynamic finite element analysis codes. We refer to these individuals as users of ``DYNA-like`` codes or ``codes like DYNA.`` Several of the ``DYNA-like`` codes used DYNA as their core. These codes are descendants of DYNA.

  4. Earned Value Management System Interpretation Handbook (EVMSIH) |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Interpretation Handbook (EVMSIH) Earned Value Management System Interpretation Handbook (EVMSIH) The DOE EVMS Interpretation Handbook EVMSIH is the basis for defining and assessing EVMS compliance to the EIA-748 Guidelines. It was developed in collaboration with DOE and contractor EVMS experts, and based extensively on the complete EVM historical body of knowledge documents from industry and various Government organizations as well as DOE unique situations/conditions.

  5. Interpolated Sounding Value-Added Product

    SciTech Connect (OSTI)

    Troyan, D

    2013-04-01

    The Interpolated Sounding (INTERPSONDE) value-added product (VAP) uses a combination of observations from radiosonde soundings, the microwave radiometer (MWR), and surface meteorological instruments in order to define profiles of the atmospheric thermodynamic state at one-minute temporal intervals and a total of at least 266 altitude levels. This VAP is part of the Merged Sounding (MERGESONDE) suite of VAPs. INTERPSONDE is the profile of the atmospheric thermodynamic state created using the algorithms of MERGESONDE without including the model data from the European Centre for Medium-range Weather Forecasting (ECMWF). More specifically, INTERPSONDE VAP represents an intermediate step within the larger MERGESONDE process.

  6. Value-based reliability transmission planning

    SciTech Connect (OSTI)

    Dalton, J.G. III; Garrison, D.L.; Fallon, C.M.

    1996-08-01

    This paper presents a new value-based reliability planning (VBRP) process proposed for planning Duke Power Company`s (DPC) regional transmission system. All transmission served customers are fed from DPC`s regional transmission system which consists of a 44-kV predominantly radial system and a 100-kV predominantly non-radial system. In the past, any single contingency that could occur during system peak conditions and cause a thermal overload required the overloaded facility to be upgraded, regardless of the costs or the likelihood of the overload occurring. The new VBRP process is based on transmission system reliability evaluation and includes the following important elements: (1) a ten-year historical data base describing the probabilities of forced outages for lines and transformers; (2) a five-year average load duration curve describing the probability of an overload should a contingency occur; (3) a customer outage cost data base; (4) and probabilistic techniques. The new process attempts to balance the costs of improving service reliability with the benefits or value that these improvements bring to these customers. The objective is to provide the customers their required level of reliability while minimizing the Total Cost of their electric service.

  7. Module 1 - Introduction to Earned Value | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Module 1 - Introduction to Earned Value Module 1 - Introduction to Earned Value This module is the introduction to a series of online tutorials designed to enhance your understanding of Earned Value Management. This module's objective is to introduce you to Earned Value and outline the blueprint for the succeeding modules. This module defines Earned Value management. It looks at the differences between Traditional management and Earned Value management, examines how Earned Value management fits

  8. Value Stream Mapping: Foam Collection and Processing.

    SciTech Connect (OSTI)

    Sorensen, Christian

    2015-07-01

    The effort to collect and process foam for the purpose of recycling performed by the Material Sustainability and Pollution Prevention (MSP2) team at Sandia National Laboratories is an incredible one, but in order to make it run more efficiently it needed some tweaking. This project started in June of 2015. We used the Value Stream Mapping process to allow us to look at the current state of the foam collection and processing operation. We then thought of all the possible ways the process could be improved. Soon after that we discussed which of the "dreams" were feasible. And finally, we assigned action items to members of the team so as to ensure that the improvements actually occur. These improvements will then, due to varying factors, continue to occur over the next couple years.

  9. Values and the quantum conception of man

    SciTech Connect (OSTI)

    Stapp, H.P.

    1995-06-01

    Classical mechanics is based upon a mechanical picture of nature that is fundamentally incorrect. It has been replaced at the basic level by a radically different theory: quantum mechanics. This change entails an enormous shift in one`s basic conception of nature, one that can profoundly alter the scientific image of man himself. Self-image is the foundation of values, and the replacement of the mechanistic self-image derived from classical mechanics by one concordant with quantum mechanics may provide the foundation of a moral order better suited to today`s times, a self-image that endows human life with meaning, responsibility, and a deeper linkage to nature as a whole.

  10. UPDATED: Oral Testimony of Energy Secretary Steven Chu at the Subcommittee

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    on Energy and Water Development of the House Committee on Appropriations - As Prepared for Delivery | Department of Energy Oral Testimony of Energy Secretary Steven Chu at the Subcommittee on Energy and Water Development of the House Committee on Appropriations - As Prepared for Delivery UPDATED: Oral Testimony of Energy Secretary Steven Chu at the Subcommittee on Energy and Water Development of the House Committee on Appropriations - As Prepared for Delivery March 15, 2011 - 12:00am Addthis

  11. Oral Testimony of Energy Secretary Steven Chu at the House Energy and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Commerce Committee - As Prepared for Delivery | Department of Energy Oral Testimony of Energy Secretary Steven Chu at the House Energy and Commerce Committee - As Prepared for Delivery Oral Testimony of Energy Secretary Steven Chu at the House Energy and Commerce Committee - As Prepared for Delivery March 16, 2011 - 12:00am Addthis Chairman Upton, Ranking Member Waxman, Mr. Barton, Mr. Dingell and Members of the Committee, thank you for the opportunity to discuss the President's Fiscal Year

  12. Quantifying the Value of Hydropower in the Electric Grid: Final...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Pumped Storage Hydropower (Detailed Analysis to Demonstrate Value)-Modeling and Analysis of Value of Advanced Pumped Storage Hydropower in the U.S. Quantifying Fl Value of Hydro in ...

  13. Production of High Value Cellulose from Tobacco

    SciTech Connect (OSTI)

    Berson, R Eric; Dvaid, Keith; McGinley, W Mark; Meduri, Praveen; Clark, Ezra; Dayalan, Ethirajulu; Sumanasekera, Gamini; Sunkara, Mahendra; Colliver, Donald

    2011-06-15

    The Kentucky Rural Energy Supply Program was established in 2005 by a federal direct appropriation to benefit the citizens of the Commonwealth by creating a unified statewide consortium to promote renewable energy and energy efficiency in Kentucky. The U.S. Department of Energy's (DOE) Office of Biomass Programs initially funded the consortium in 2005 with a $2 million operational grant. The Kentucky Rural Energy Consortium (KREC) was formed at the outset of the program to advance energy efficiency and comprehensive research on biomass and bioenergy of importance to Kentucky agriculture, rural communities, and related industries. In recognition of the successful efforts of the program, KREC received an additional $1.96 million federal appropriation in 2008 for renewal of the DOE grant. From the beginning, KREC understood the value of providing a statewide forum for the discussion of Kentucky's long term energy needs and economic development potential. The new funding allowed KREC to continue to serve as a clearinghouse and support new research and development and outreach programs for energy efficiency and renewable energy.

  14. Biopower Report Presents Methodology for Assessing the Value...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Report Presents Methodology for Assessing the Value of Co-Firing Biomass in Pulverized Coal Plants Biopower Report Presents Methodology for Assessing the Value of Co-Firing...

  15. Doppler Lidar Vertical Velocity Statistics Value-Added Product...

    Office of Scientific and Technical Information (OSTI)

    Vertical Velocity Statistics Value-Added Product Citation Details In-Document Search Title: Doppler Lidar Vertical Velocity Statistics Value-Added Product You are accessing a ...

  16. ARM Climate Research Facility Quarterly Value-Added Product Report...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: ARM Climate Research Facility Quarterly Value-Added Product Report Citation Details In-Document Search Title: ARM Climate Research Facility Quarterly Value-Added ...

  17. Sandia Energy - Sandia Tool Determines Value of Solar Photovoltaic...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tool Determines Value of Solar Photovoltaic Power Systems Home Renewable Energy Energy Partnership News News & Events Photovoltaic Solar Sandia Tool Determines Value of Solar...

  18. Energy Star Building Upgrade Value Calculator | Open Energy Informatio...

    Open Energy Info (EERE)

    Upgrade Value Calculator Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Energy Star Building Upgrade Value Calculator (for Office Properties) AgencyCompany...

  19. Estimating the Value of Electricity Storage Resources in Electricity...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Value of Electricity Storage Resources in Electricity Markets - EAC 2011 Estimating the Value of Electricity Storage Resources in Electricity Markets - EAC 2011 The purpose of this ...

  20. The Value of Distributed Generation and CHP Resources in Wholesale...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Value of Distributed Generation and CHP Resources in Wholesale Power Markets, September 2005 The Value of Distributed Generation and CHP Resources in Wholesale Power Markets, ...

  1. Department of Energy Earned Value Management Survey Results ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Earned Value Management Survey Results Department of Energy Earned Value Management Survey Results Humphreys & Associates, Inc. (H&A) conducted a survey of ...

  2. CBEI: Broker Training - Placing Value on Energy Retrofits - 2015...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Broker Training - Placing Value on Energy Retrofits - 2015 Peer Review CBEI: Broker Training - Placing Value on Energy Retrofits - 2015 Peer Review Presenter: Susan Wachter, ...

  3. ARM Evaluation Product : Droplet Number Concentration Value-Added...

    Office of Scientific and Technical Information (OSTI)

    Evaluation Product : Droplet Number Concentration Value-Added Product Title: ARM Evaluation Product : Droplet Number Concentration Value-Added Product Cloud droplet number ...

  4. Earned Value Management System Gold Card | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Gold Card Earned Value Management System Gold Card Earned Value Management (EVM) is a systematic approach to the integration and measurement of cost, schedule, and technical ...

  5. ARM Climate Research Facility Quarterly Value-Added Product Report...

    Office of Scientific and Technical Information (OSTI)

    Program Document: ARM Climate Research Facility Quarterly Value-Added Product Report Citation Details In-Document Search Title: ARM Climate Research Facility Quarterly Value-Added ...

  6. ARM Climate Research Facility Quarterly Value-Added Product Report...

    Office of Scientific and Technical Information (OSTI)

    ARM Climate Research Facility Quarterly Value-Added Product Report Citation Details In-Document Search Title: ARM Climate Research Facility Quarterly Value-Added Product Report ...

  7. Value of Energy Storage for Grid Applications (Technical Report...

    Office of Scientific and Technical Information (OSTI)

    Value of Energy Storage for Grid Applications Citation Details In-Document Search Title: Value of Energy Storage for Grid Applications This analysis evaluates several operational ...

  8. Carbon Value Analysis Tool (CVAT) | Open Energy Information

    Open Energy Info (EERE)

    Value Analysis Tool (CVAT) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Carbon Value Analysis Tool (CVAT) AgencyCompany Organization: World Resources Institute...

  9. Methods for Analyzing the Economic Value of Concentrating Solar...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (CSP-TES) provides multiple quantifiable benefits compared to CSP without storage or to solar photovoltaic (PV) technology, including higher energy value, ancillary services value,...

  10. SEPARATION OF PLUTONIUM VALUES FROM OTHER METAL VALUES IN AQUEOUS SOLUTIONS BY SELECTIVE COMPLEXING AND ADSORPTION

    DOE Patents [OSTI]

    Beaton, R.H.

    1960-06-28

    A process is given for separating tri- or tetravalent plutonium from fission products in an aqueous solution by complexing the fission products with oxalate, tannate, citrate, or tartrate anions at a pH value of at least 2.4 (preferably between 2.4 and 4), and contacting a cation exchange resin with the solution whereby the plutonium is adsorbed while the complexed fission products remain in solution.

  11. METHOD OF SEPARATING TETRAVALENT PLUTONIUM VALUES FROM CERIUM SUB-GROUP RARE EARTH VALUES

    DOE Patents [OSTI]

    Duffield, R.B.; Stoughton, R.W.

    1959-02-01

    A method is presented for separating plutonium from the cerium sub-group of rare earths when both are present in an aqueous solution. The method consists in adding an excess of alkali metal carbonate to the solution, which causes the formation of a soluble plutonium carbonate precipitate and at the same time forms an insoluble cerium-group rare earth carbonate. The pH value must be adjusted to bctween 5.5 and 7.5, and prior to the precipitation step the plutonium must be reduced to the tetravalent state since only tetravalent plutonium will form the soluble carbonate complex.

  12. A less stressful alternative to oral gavage for pharmacological and toxicological studies in mice

    SciTech Connect (OSTI)

    Walker, Mary K.; Boberg, Jason R.; Walsh, Mary T.; Wolf, Valerie; Trujillo, Alisha; Duke, Melissa Skelton; Palme, Rupert

    2012-04-01

    Oral gavage dosing can induce stress and potentially confound experimental measurements, particularly when blood pressure and heart rate are endpoints of interest. Thus, we developed a pill formulation that mice would voluntarily consume and tested the hypothesis that pill dosing would be significantly less stressful than oral gavage. C57Bl/6 male mice were singly housed and on four consecutive days were exposed to an individual walking into the room (week 1, control), a pill being placed into the cage (week 2), and a dose of water via oral gavage (week 3). Blood pressure and heart rate were recorded by radiotelemetry continuously for 5 h after treatment, and feces collected 610 h after treatment for analysis of corticosterone metabolites. Both pill and gavage dosing significantly increased mean arterial pressure (MAP) during the first hour, compared to control. However, the increase in MAP was significantly greater after gavage and remained elevated up to 5 h, while MAP returned to normal within 2 h after a pill. Neither pill nor gavage dosing significantly increased heart rate during the first hour, compared to control; however, pill dosing significantly reduced heart rate while gavage significantly increased heart rate 25 h post dosing. MAP and heart rate did not differ 24 h after dosing. Lastly, only gavage dosing significantly increased fecal corticosterone metabolites, indicating a systemic stress response via activation of the hypothalamicpituitaryadrenal axis. These data demonstrated that this pill dosing method of mice is significantly less stressful than oral gavage. -- Highlights: ? Developed a novel oral dosing method using a pill that mice will readily consume. ? Assessed stress by blood pressure, heart rate, and fecal corticosterone metabolites. ? Demonstrated that pill dosing is significantly less stressful than oral gavage.

  13. Introduction to the Value of Program Evaluation Case Study Series

    Broader source: Energy.gov [DOE]

    Case Studies Show the Value of Program Evaluation, part of the Value of Program Evaluation Case Study Series, Sponsored by the U.S. Department of Energy, November 2009.

  14. THE VALUE OF ECONOMIC DISPATCH A REPORT TO CONGRESS PURSUANT...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    THE VALUE OF ECONOMIC DISPATCH A REPORT TO CONGRESS PURSUANT TO SECTION 1234 OF THE ENERGY POLICY ACT OF 2005 THE VALUE OF ECONOMIC DISPATCH A REPORT TO CONGRESS PURSUANT TO ...

  15. U.S. Natural Gas Wellhead Value and Marketed Production

    U.S. Energy Information Administration (EIA) Indexed Site

    Data Series Area 2010 2011 2012 2013 2014 2015 View History Quantity of Production Associated with Reported Wellhead Value (Million Cubic Ft.) 1980-2006 Imputed Wellhead Value of ...

  16. ZERH Webinar: Sales and Value Recognition of Zero Energy Ready...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ZERH Webinar: Sales and Value Recognition of Zero Energy Ready Homes ZERH Webinar: Sales and Value Recognition of Zero Energy Ready Homes December 18, 2014 12:00PM to 1:15PM EST ...

  17. Simulating the Value of Concentrating Solar Power with Thermal...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Simulating the Value of Concentrating Solar Power with Thermal Energy Storage in a ... DE-AC36-08GO28308 Simulating the Value of Concentrating Solar Power with Thermal Energy ...

  18. NREL Quantifies Value of CSP to the Grid (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-08-01

    In California study, greater penetration of renewable energy means greater value of CSP with thermal energy storage.

  19. RECOVERY AND SEPARATION OF LITHIUM VALUES FROM SALVAGE SOLUTIONS

    DOE Patents [OSTI]

    Hansford, D.L.; Raabe, E.W.

    1963-08-20

    Lithium values can be recovered from an aqueous basic solution by reacting the values with a phosphate salt soluble in the solution, forming an aqueous slurry of the resultant aqueous insoluble lithium phosphate, contacting the slurry with an organic cation exchange resin in the acid form until the slurry has been clarified, and thereafter recovering lithium values from the resin. (AEC)

  20. CBEI: Broker Training - Placing Value on Energy Retrofits - 2015 Peer

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Review | Department of Energy Broker Training - Placing Value on Energy Retrofits - 2015 Peer Review CBEI: Broker Training - Placing Value on Energy Retrofits - 2015 Peer Review Presenter: Susan Wachter, University of Pennsylvania View the Presentation PDF icon CBEI: Broker Training - Placing Value on Energy Retrofits - 2015 Peer Review More Documents & Publications Market Engagement Overview - 2015 BTO Peer Review Commercial Buildings Integration Program Overview - 2015 BTO Peer Review

  1. The Value of Distributed Solar Electric Generation to San Antonio

    SciTech Connect (OSTI)

    Jones, Nic; Norris, Ben; Meyer, Lisa

    2013-02-14

    This report presents an analysis of value provided by grid-connected, distributed PV in San Antonio from a utility perspective. The study quantified six value components, summarized in Table ES- 1. These components represent the benefits that accrue to the utility, CPS Energy, in accepting solar onto the grid. This analysis does not treat the compensation of value, policy objectives, or cost-effectiveness from the retail consumer perspective.

  2. Department of Energy Earned Value Management Survey Results | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Department of Energy Earned Value Management Survey Results Department of Energy Earned Value Management Survey Results Humphreys & Associates, Inc. (H&A) conducted a survey of Department of Energy (DOE) Earned Value Management (EVM) and Project Management (PM) stakeholders. Two versions of the survey were distributed: DOE Federal Staff Survey (inclusive of DOE employees and contracted staff support) and the Capital Asset Project Contractors Survey (inclusive of DOE prime

  3. Improving consumer value through enhanced performance around the world

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Improving consumer value through enhanced performance around the world Improving consumer value through enhanced performance around the world LANL statistical tools have helped create Reliability Technology (RT), which increases the overall fraction of productive manufacturing time, or "uptime," for its internal manufacturing lines. April 3, 2012 Improving consumer value through enhanced performance around the world Reliability Technology (RT) is a comprehensive reliability engineering

  4. Microsoft Word - Web Posting for Earned Value Management

    Office of Environmental Management (EM)

    CONTRACTOR EARNED VALUE MANAGEMENT SYSTEM CERTIFICATION STATUS (as of December 2, 2015) DOE Office (Geographic Site) Contract Name Contractor Name Principal Companies Certified ...

  5. The Purpose and Value of Successful Technology Demonstrations...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Purpose and Value of Successful Technology Demonstrations - The Energy Independence and Security Act of 2007 Demonstrations by Steve Bossart, NETL Senior Management and Technical...

  6. Two small businesses selected for work valued at $80 million

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Businesses compete for drilling, monitoring work Two small businesses selected for work valued at 80 million Two small businesses compete for up to 80 million in well drilling ...

  7. Microsoft Word - Web Posting for Earned Value Management.doc

    Office of Environmental Management (EM)

    CONTRACTOR EARNED VALUE MANAGEMENT SYSTEM CERTIFICATION STATUS (as of April 11, 2016) DOE Office (Geographic Site) Contract Name Contractor Name Principal Companies Certified Green ...

  8. Enhancing Earned Value (EV) Analysis Using Project Assessment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    & Reporting System (PARS II) - Road Show Presentation Enhancing Earned Value (EV) Analysis Using Project Assessment & Reporting System (PARS II) - Road Show Presentation This ...

  9. Earned Value Management System (EVMS) - DOE Directives, Delegations...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0A, Earned Value Management System (EVMS) by Rick Blaisdell Functional areas: Capital Assets, Contract Management, Program Management, Project Management This Guide provides...

  10. Livermore Field Office sets core values as part of continuous...

    National Nuclear Security Administration (NNSA)

    At their recent off-site continuous improvement session, the NNSA Livermore Field Office (LFO) in California unveiled their new set of core values: Integrity - Trustworthy, ...

  11. Texas: City of San Antonio Demonstrates Value of Greater Investments...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Greater Investments in Clean Energy Texas: City of San Antonio Demonstrates Value ... in efficient and renewable energy and water conservation can create jobs and stimulate ...

  12. NREL: State and Local Governments - Value of Solar: Program Design...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and the Solar Electric Power Association (SEPA) present ... benefits, and line losses, to represent a of range ... Generation to the U.S. Electric Grid" Value of Solar ...

  13. Quantifying the Value of Hydropower in the Electric Grid: Final...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... security and climate change are driving policies, ... at night, introduces system-balancing challenges that ... as a new storage asset class capturing the full value of ...

  14. History, Applications, Numerical Values and Problems with the...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Numerical Values and Problems with the Calculation of EROI (Energy Return on Energy Investment) Professor Charles Hall State University of NY College of Environmental Science and...

  15. WORKSHOP: HIGH VALUE ROLL TO ROLL MANUFACTURING INNOVATION, DECEMBER...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    will focus on the on the advanced manufacturing technology topic of High Value Roll To ... Unique Metrology and Quality Systems, and Continuous ProcessingProcess Development Needs. ...

  16. Double-{beta} decay Q value of {sup 150}Nd

    SciTech Connect (OSTI)

    Kolhinen, V. S.; Eronen, T.; Gorelov, D.; Hakala, J.; Jokinen, A.; Kankainen, A.; Moore, I. D.; Rissanen, J.; Saastamoinen, A.; Suhonen, J.; Aeystoe, J. [Department of Physics, P. O. Box 35 (YFL), FI-40014 University of Jyvaeskylae (Finland)

    2010-08-15

    The double-{beta} decay Q value of {sup 150}Nd was determined by using the JYFLTRAP Penning trap mass spectrometer. The measured mass difference between {sup 150}Nd and {sup 150}Sm is 3371.38(20) keV. This new value deviates by 3.7 keV from the previously adopted value of 3367.7(22) keV and is a factor of 10 more precise. Accurate knowledge of this Q value is important because {sup 150}Nd is a primary candidate to be used in the search for neutrinoless double-{beta} decay modes in several experiments.

  17. Level: National Data; Row: Values of Shipments within NAICS Codes;

    U.S. Energy Information Administration (EIA) Indexed Site

    3 Consumption Ratios of Fuel, 2006; Level: National Data; Row: Values of Shipments within NAICS Codes; Column: Energy-Consumption Ratios; Unit: Varies. Consumption Consumption per Dollar Consumption per Dollar of Value NAICS per Employee of Value Added of Shipments Code(a) Economic Characteristic(b) (million Btu) (thousand Btu) (thousand Btu) Total United States 311 - 339 ALL MANUFACTURING INDUSTRIES Value of Shipments and Receipts (million dollars) Under 20 330.6 3.6 2.0 20-49 550.0 4.5 2.2

  18. Level: National Data; Row: Values of Shipments within NAICS Codes;

    U.S. Energy Information Administration (EIA) Indexed Site

    3 Consumption Ratios of Fuel, 2010; Level: National Data; Row: Values of Shipments within NAICS Codes; Column: Energy-Consumption Ratios; Unit: Varies. Consumption Consumption per Dollar Consumption per Dollar of Value NAICS per Employee of Value Added of Shipments Code(a) Economic Characteristic(b) (million Btu) (thousand Btu) (thousand Btu) Total United States 311 - 339 ALL MANUFACTURING INDUSTRIES Value of Shipments and Receipts (million dollars) Under 20 405.4 4.0 2.1 20-49 631.3 4.7 2.2

  19. An Initial Value of Information (VOI) Framework for Geophysical...

    Open Energy Info (EERE)

    Exploration of Geothermal Energy Abstract We present a value of information (VOI) methodology for the exploration geothermal problem. VOI quantifies how relevant any particular...

  20. Table 4. Average value of photovoltaic modules, 2003-2013

    U.S. Energy Information Administration (EIA) Indexed Site

    Average value of photovoltaic modules, 2003-2013" "(dollars per peak watt)" ... Administration, Form EIA-63B, 'Annual Photovoltaic CellModule Shipments Report.' Note: ...

  1. Ecological Screening Values for Surface Water, Sediment, and...

    Office of Scientific and Technical Information (OSTI)

    Ecological Screening Values for Surface Water, Sediment, and Soil Friday, G. P. 54 ENVIRONMENTAL SCIENCES; SOILS; SURFACE WATERS; SEDIMENTS; ECOLOGICAL CONCENTRATION; ENVIRONMENTAL...

  2. ARM Climate Research Facility Quarterly Value-Added Product Report...

    Office of Scientific and Technical Information (OSTI)

    Climate Research Facility Quarterly Value-Added Product Report Fourth Quarter: July 1-September 30, 2012 Citation Details In-Document Search Title: ARM Climate Research Facility ...

  3. Microsoft Word - Web Posting for Earned Value Management

    Office of Environmental Management (EM)

    CONTRACTOR EARNED VALUE MANAGEMENT SYSTEM CERTIFICATION STATUS (as of January 14, 2016) DOE Office (Geographic Site) Contract Name Contractor Name Principal Companies Certified ...

  4. Earned Value Management System (EVMS) Corrective Action Standard...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (EVMS) Corrective Action Standard Operating Procedure Earned Value Management System (EVMS) Corrective Action Standard Operating Procedure This EVMS Corrective Action Standard ...

  5. Valuing Green in the Appraisal Process - Building America Top...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Valuing Green in the Appraisal Process - Building America Top Innovation Real estate appraisers have historically faced challenges with green and energy efficient homes, both in ...

  6. Imputed Wellhead Value of Natural Gas Marketed Production

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Thousand Dollars) Data Series: Quantity of Production Imputed Wellhead Value Wellhead Price Marketed Production Period: Annual Download Series History Download Series History...

  7. Shared Value in Utility and Efficiency Partnerships | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Energy Efficiency Solutions Conference: Shared Value in Utility and Efficiency Partnerships, July 10, 2012. Presents four case studies highlighting partnerships between local...

  8. DOE: Quantifying the Value of Hydropower in the Electric Grid

    SciTech Connect (OSTI)

    2012-12-31

    The report summarizes research to Quantify the Value of Hydropower in the Electric Grid. This 3-year DOE study focused on defining value of hydropower assets in a changing electric grid. Methods are described for valuation and planning of pumped storage and conventional hydropower. The project team conducted plant case studies, electric system modeling, market analysis, cost data gathering, and evaluations of operating strategies and constraints. Five other reports detailing these research results are available a project website, www.epri.com/hydrogrid. With increasing deployment of wind and solar renewable generation, many owners, operators, and developers of hydropower have recognized the opportunity to provide more flexibility and ancillary services to the electric grid. To quantify value of services, this study focused on the Western Electric Coordinating Council region. A security-constrained, unit commitment and economic dispatch model was used to quantify the role of hydropower for several future energy scenarios up to 2020. This hourly production simulation considered transmission requirements to deliver energy, including future expansion plans. Both energy and ancillary service values were considered. Addressing specifically the quantification of pumped storage value, no single value stream dominated predicted plant contributions in various energy futures. Modeling confirmed that service value depends greatly on location and on competition with other available grid support resources. In this summary, ten different value streams related to hydropower are described. These fell into three categories; operational improvements, new technologies, and electricity market opportunities. Of these ten, the study was able to quantify a monetary value in six by applying both present day and future scenarios for operating the electric grid. This study confirmed that hydropower resources across the United States contribute significantly to operation of the grid in terms of energy, capacity, and ancillary services. Many potential improvements to existing hydropower plants were found to be cost-effective. Pumped storage is the most likely form of large new hydro asset expansions in the U.S. however, justifying investments in new pumped storage plants remains very challenging with current electricity market economics. Even over a wide range of possible energy futures, up to 2020, no energy future was found to bring quantifiable revenues sufficient to cover estimated costs of plant construction. Value streams not quantified in this study may provide a different cost-benefit balance and an economic tipping point for hydro. Future studies are essential in the quest to quantify the full potential value. Additional research should consider the value of services provided by advanced storage hydropower and pumped storage at smaller time steps for integration of variable renewable resources, and should include all possible value streams such as capacity value and portfolio benefits i.e.; reducing cycling on traditional generation.

  9. Value of Concentrating Solar Power and Thermal Energy Storage

    SciTech Connect (OSTI)

    Sioshansi, R.; Denholm, P.

    2010-02-01

    This paper examines the value of concentrating solar power (CSP) and thermal energy storage (TES) in four regions in the southwestern United States. Our analysis shows that TES can increase the value of CSP by allowing more thermal energy from a CSP plant?s solar field to be used, by allowing a CSP plant to accommodate a larger solar field, and by allowing CSP generation to be shifted to hours with higher energy prices. We analyze the sensitivity of CSP value to a number of factors, including the optimization period, price and solar forecasting, ancillary service sales, capacity value and dry cooling of the CSP plant. We also discuss the value of CSP plants and TES net of capital costs.

  10. Development of Oral Fomulation of SCV-07 for Use in Tuberculosis

    SciTech Connect (OSTI)

    2007-11-16

    An evaluation of the immunomodulatory peptide SCV-07 was conducted as a possible therapeutic treatment for tuberculosis. This evaluation included mouse models, clinical trials and various forms of the drug such as liquid injection and development of an oral pill. It was found that SCV-07 significantly increased the survival rate of animals infected with lethal doses of Mycobacterium bovis. It enhanced the functional activity of macrophages in a dose-dependent fashion. The combination of SCV-07 with bacteriostatic drugs, such as izoniazid, was particularly effective. Phase II clinical trials in a TB clinic demonstrated that the usage of the injection form of SCV-07 for lung TB treatment in combination with standard chemotherapy decreased the quantity of patients with positive sputum assays for Mycobacteria, promoted healing of cavities in lungs, stabilized parameters of cell immunity, and resulted in a significant improvement in the general condition of patients. Clinical trials results of the oral drug form are still being evaluated.

  11. Blood Vessel Normalization in the Hamster Oral Cancer Model for Experimental Cancer Therapy Studies

    SciTech Connect (OSTI)

    Ana J. Molinari; Romina F. Aromando; Maria E. Itoiz; Marcela A. Garabalino; Andrea Monti Hughes; Elisa M. Heber; Emiliano C. C. Pozzi; David W. Nigg; Veronica A. Trivillin; Amanda E. Schwint

    2012-07-01

    Normalization of tumor blood vessels improves drug and oxygen delivery to cancer cells. The aim of this study was to develop a technique to normalize blood vessels in the hamster cheek pouch model of oral cancer. Materials and Methods: Tumor-bearing hamsters were treated with thalidomide and were compared with controls. Results: Twenty eight hours after treatment with thalidomide, the blood vessels of premalignant tissue observable in vivo became narrower and less tortuous than those of controls; Evans Blue Dye extravasation in tumor was significantly reduced (indicating a reduction in aberrant tumor vascular hyperpermeability that compromises blood flow), and tumor blood vessel morphology in histological sections, labeled for Factor VIII, revealed a significant reduction in compressive forces. These findings indicated blood vessel normalization with a window of 48 h. Conclusion: The technique developed herein has rendered the hamster oral cancer model amenable to research, with the potential benefit of vascular normalization in head and neck cancer therapy.

  12. Measuring industrial energy efficiency: Physical volume versus economic value

    SciTech Connect (OSTI)

    Freeman, S.L.; Niefer, M.J.; Roop, J.M.

    1996-12-01

    This report examines several different measures of industrial output for use in constructing estimates of industrial energy efficiency and discusses some reasons for differences between the measures. Estimates of volume-based measures of output, as well as 3 value-based measures of output (value of production, value of shipments, and value added), are evaluated for 15 separate 4-digit industries. Volatility, simple growth rate, and trend growth rate estimates are made for each industry and each measure of output. Correlations are made between the volume- and value-based measures of output. Historical energy use data are collected for 5 of the industries for making energy- intensity estimates. Growth rates in energy use, energy intensity, and correlations between volume- and value-based measures of energy intensity are computed. There is large variability in growth trend estimates both long term and from year to year. While there is a high correlation between volume- and value-based measures of output for a few industries, typically the correlation is low, and this is exacerbated for estimates of energy intensity. Analysis revealed reasons for these low correlations. It appears that substantial work must be done before reliable measures of trends in the energy efficiency of industry can be accurately characterized.

  13. The social values at risk from sea-level rise

    SciTech Connect (OSTI)

    Graham, Sonia; Barnett, Jon; Fincher, Ruth; Hurlimann, Anna; Mortreux, Colette; Waters, Elissa

    2013-07-15

    Analysis of the risks of sea-level rise favours conventionally measured metrics such as the area of land that may be subsumed, the numbers of properties at risk, and the capital values of assets at risk. Despite this, it is clear that there exist many less material but no less important values at risk from sea-level rise. This paper re-theorises these multifarious social values at risk from sea-level rise, by explaining their diverse nature, and grounding them in the everyday practices of people living in coastal places. It is informed by a review and analysis of research on social values from within the fields of social impact assessment, human geography, psychology, decision analysis, and climate change adaptation. From this we propose that it is the lived values of coastal places that are most at risk from sea-level rise. We then offer a framework that groups these lived values into five types: those that are physiological in nature, and those that relate to issues of security, belonging, esteem, and self-actualisation. This framework of lived values at risk from sea-level rise can guide empirical research investigating the social impacts of sea-level rise, as well as the impacts of actions to adapt to sea-level rise. It also offers a basis for identifying the distribution of related social outcomes across populations exposed to sea-level rise or sea-level rise policies.

  14. Erosion control for the Fundamental values in NEPA

    SciTech Connect (OSTI)

    McMillen, M.C.; Hinds, W.T.

    1997-08-01

    A commitment to exploring alternatives to major Federal actions, pursuing and facilitating public involvement, and identifying measures to mitigate the adverse effects of actions selected for implementation are important values of the National Environmental Policy Act (NEPA) process. While other major environmental legislation may commit an agency to different aspects of environmental review and protection, no other Federal statute combines the unique values that NEPA does. Since its enactment over 26 years ago, NEPA has faced numerous challenges to its fundamental intent and values. Recently, processes deemed to be, or assumed to be, functionally equivalent have attempted to subsume important NEPA values while allowing major Federal actions to proceed without NEPA`s environmental review. This paper examines the concept and origin of the term NEPA values, and the effects of judicial review and actions such as DOE`s NEPA/CERCLA integration agreement, have had on maintaining fundamental NEPA values in the Federal decision making process. In addition, based on concerns that are building momentum in the US Congress, a brief discussion will be included exploring what may occur in the future to prevent further erosion of fundamental NEPA values.

  15. SL-01, an oral derivative of gemcitabine, inhibited human breast cancer growth through induction of apoptosis

    SciTech Connect (OSTI)

    Li, Yuan-Yuan; Qin, Yi-Zhuo; Wang, Rui-Qi; Li, Wen-Bao; Qu, Xian-Jun

    2013-08-23

    Highlights: SL-01 is an oral derivative of gemcitabine. SL-01 possessed activity against human breast cancer growth via apoptotic induction. SL-01s activity was more potently than that of gemcitabine. SL-01 inhibited cancer growth without toxicity to mice. -- Abstract: SL-01 is an oral derivative of gemcitabine that was synthesized by introducing the moiety of 3-(dodecyloxycarbonyl) pyrazine-2-carbonyl at N4-position on cytidine ring of gemcitabine. We aimed to evaluate the efficacy of SL-01 on human breast cancer growth. SL-01 significantly inhibited MCF-7 proliferation as estimated by colorimetric assay. Flow cytometry assay indicated the apoptotic induction and cell cycle arrest in G1 phase. SL-01 modulated the expressions of p-ATM, p53 and p21 and decrease of cyclin D1 in MCF-7 cells. Further experiments were performed in a MCF-7 xenografts mouse model. SL-01 by oral administration strongly inhibited MCF-7 xenografts growth. This effect of SL-01 might arise from its roles in the induction of apoptosis. Immunohistochemistry assay showed the increase of TUNEL staining cells. Western blotting indicated the modulation of apoptotic proteins in SL-01-treated xenografts. During the course of study, there was no evidence of toxicity to mice. In contrast, the decrease of neutrophil cells in peripheral and increase of AST and ALT levels in serum were observed in the gemcitabine-treated mice. Conclusion: SL-01 possessed similar activity against human breast cancer growth with gemcitabine, whereas, with lower toxicity to gemcitabine. SL-01 is a potent oral agent that may supplant the use of gemcitabine.

  16. The Value of Energy Storage for Grid Applications

    Broader source: Energy.gov [DOE]

    Electricity storage can provide multiple benefits to the grid, including the ability to levelize load, provide ancillary services, and provide firm capacity. Historically, it has been difficult to compare the value of electricity storage to alternative generation resources using simplified metrics, such as levelized cost of energy. To properly value energy storage requires detailed time-series simulations using software tools that can co-optimize multiple services provided by different storage technologies. This analysis uses a commercial grid simulation tool to examine the potential value of different general classes of storage devices when providing both energy and ancillary services.

  17. Implementation multi representation and oral communication skills in Department of Physics Education on Elementary Physics II

    SciTech Connect (OSTI)

    Kusumawati, Intan; Marwoto, Putut Linuwih, Suharto

    2015-09-30

    The ability of multi representation has been widely studied, but there has been no implementation through a model of learning. This study aimed to determine the ability of the students multi representation, relationships multi representation capabilities and oral communication skills, as well as the application of the relations between the two capabilities through learning model Presentatif Based on Multi representation (PBM) in solving optical geometric (Elementary Physics II). A concurrent mixed methods research methods with qualitative–quantitative weights. Means of collecting data in the form of the pre-test and post-test with essay form, observation sheets oral communication skills, and assessment of learning by observation sheet PBM–learning models all have a high degree of respectively validity category is 3.91; 4.22; 4.13; 3.88. Test reliability with Alpha Cronbach technique, reliability coefficient of 0.494. The students are department of Physics Education Unnes as a research subject. Sequence multi representation tendency of students from high to low in sequence, representation of M, D, G, V; whereas the order of accuracy, the group representation V, D, G, M. Relationship multi representation ability and oral communication skills, comparable/proportional. Implementation conjunction generate grounded theory. This study should be applied to the physics of matter, or any other university for comparison.

  18. Doppler Lidar Vertical Velocity Statistics Value-Added Product

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    49 Doppler Lidar Vertical Velocity Statistics Value-Added Product RK Newsom C Sivaraman TR Shippert LD Riihimaki July 2015 DISCLAIMER This report was prepared as an account of work...

  19. Value of Energy Storage for Grid Applications Denholm, P.; Jorgenson...

    Office of Scientific and Technical Information (OSTI)

    Value of Energy Storage for Grid Applications Denholm, P.; Jorgenson, J.; Hummon, M.; Jenkin, T.; Palchak, D.; Kirby, B.; Ma, O.; O'Malley, M. 24 POWER TRANSMISSION AND...

  20. Earned Value (EV) Analysis and Project Assessment & Reporting...

    Office of Environmental Management (EM)

    staff to the Secretary of Energy will have easy access to the same data. EarnedValue-EV-AnalysisProjectAssessmentReportingSystem-PARS IIPresentationJanuary2013.pdf More...

  1. Value of Improved Short-Term Wind Power Forecasting

    SciTech Connect (OSTI)

    Hodge, B. M.; Florita, A.; Sharp, J.; Margulis, M.; Mcreavy, D.

    2015-02-01

    This report summarizes an assessment of improved short-term wind power forecasting in the California Independent System Operator (CAISO) market and provides a quantification of its potential value.

  2. G-Band Vapor Radiometer Precipitable Water Vapor (GVRPWV) Value...

    Office of Scientific and Technical Information (OSTI)

    G-Band Vapor Radiometer Precipitable Water Vapor (GVRPWV) Value-Added Product Citation Details In-Document Search Title: G-Band Vapor Radiometer Precipitable Water Vapor (GVRPWV) ...

  3. Biopower Report Presents Methodology for Assessing the Value...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Biomass in Pulverized Coal Plants Biopower Report Presents Methodology for Assessing the Value of Co-Firing Biomass in Pulverized Coal Plants November 20, 2014 - 12:22pm ...

  4. Gyrotron cavity resonator with an improved value of Q

    DOE Patents [OSTI]

    Stone, David S.; Shively, James F.

    1982-10-26

    A gyrotron cavity resonator is connected smoothly and directly to an output waveguide with a very gradually tapered wall so that values of external Q lower than twice the diffraction limit are obtainable.

  5. Object detection with a multistatic array using singular value decomposition

    DOE Patents [OSTI]

    Hallquist, Aaron T.; Chambers, David H.

    2014-07-01

    A method and system for detecting the presence of subsurface objects within a medium is provided. In some embodiments, the detection system operates in a multistatic mode to collect radar return signals generated by an array of transceiver antenna pairs that is positioned across a surface and that travels down the surface. The detection system converts the return signals from a time domain to a frequency domain, resulting in frequency return signals. The detection system then performs a singular value decomposition for each frequency to identify singular values for each frequency. The detection system then detects the presence of a subsurface object based on a comparison of the identified singular values to expected singular values when no subsurface object is present.

  6. Robust Waste-to-Value Solution Using Advanced Monitoring and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    energy while recovering and recycling up to 90% of the water in the waste stream. ... application of the waste-to-value technology will be in the food and beverage industry. ...

  7. How to Estimate the Value of Service Reliability Improvements

    SciTech Connect (OSTI)

    Sullivan, Michael J.; Mercurio, Matthew G.; Schellenberg, Josh A.; Eto, Joseph H.

    2010-06-08

    A robust methodology for estimating the value of service reliability improvements is presented. Although econometric models for estimating value of service (interruption costs) have been established and widely accepted, analysts often resort to applying relatively crude interruption cost estimation techniques in assessing the economic impacts of transmission and distribution investments. This paper first shows how the use of these techniques can substantially impact the estimated value of service improvements. A simple yet robust methodology that does not rely heavily on simplifying assumptions is presented. When a smart grid investment is proposed, reliability improvement is one of the most frequently cited benefits. Using the best methodology for estimating the value of this benefit is imperative. By providing directions on how to implement this methodology, this paper sends a practical, usable message to the industry.

  8. Variance control in weak-value measurement pointers

    SciTech Connect (OSTI)

    Parks, A. D.; Gray, J. E.

    2011-07-15

    The variance of an arbitrary pointer observable is considered for the general case that a complex weak value is measured using a complex valued pointer state. For the typical cases where the pointer observable is either its position or momentum, the associated expressions for the pointer's variance after the measurement contain a term proportional to the product of the weak value's imaginary part with the rate of change of the third central moment of position relative to the initial pointer state just prior to the time of the measurement interaction when position is the observable--or with the initial pointer state's third central moment of momentum when momentum is the observable. These terms provide a means for controlling pointer position and momentum variance and identify control conditions which, when satisfied, can yield variances that are smaller after the measurement than they were before the measurement. Measurement sensitivities which are useful for estimating weak-value measurement accuracies are also briefly discussed.

  9. ,"U.S. Natural Gas Wellhead Value and Marketed Production"

    U.S. Energy Information Administration (EIA) Indexed Site

    Value and Marketed Production" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","U.S. Natural...

  10. Template:LabelValuePair | Open Energy Information

    Open Energy Info (EERE)

    is typically used to display the results of an ask or sparql query in a simple label: value format. It is used by many pages, including the sub pages for country profiles, and is...

  11. Valuing Green in the Appraisal Process - Building America Top Innovation |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Valuing Green in the Appraisal Process - Building America Top Innovation Valuing Green in the Appraisal Process - Building America Top Innovation Real estate appraisers have historically faced challenges with green and energy efficient homes, both in identifying comparables and in supporting adjustments for improvements. These difficulties stem BARA Green Addendum Top Innov 2014-2.jpg from many reasons, including data gaps in commonly used information systems and lender

  12. Unlocking Customer Value: The Virtual Power Plant | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Unlocking Customer Value: The Virtual Power Plant Unlocking Customer Value: The Virtual Power Plant The utility world has changed drastically in the last 10 years. New technologies like Smart Meters and fully functional Smart Grid concepts have made large inroads into the utility space and no one should want to be left behind. Utilities also face additional pressures from regulatory bodies who are continuing to encourage carbon reduction and greater customer flexibility. Utilities need to

  13. Enhancing Earned Value (EV) Analysis Using Project Assessment & Reporting

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    System (PARS II) - Road Show Presentation | Department of Energy Enhancing Earned Value (EV) Analysis Using Project Assessment & Reporting System (PARS II) - Road Show Presentation Enhancing Earned Value (EV) Analysis Using Project Assessment & Reporting System (PARS II) - Road Show Presentation This presentation was provided by the DOE Office of Project Management Oversight and Assessments (formerly DOE Office of Acquisition and Project Management) in January 2013. It is about the

  14. Value of Solar. Program Design and Implementation Considerations (Technical

    Office of Scientific and Technical Information (OSTI)

    Report) | SciTech Connect SciTech Connect Search Results Technical Report: Value of Solar. Program Design and Implementation Considerations Citation Details In-Document Search Title: Value of Solar. Program Design and Implementation Considerations Here, we present an analysis that assesses the potential market type that might form in the United States under a VOS rate, given current national average solar costs and various incentive scenarios, for the most populous city in each state. Three

  15. Doppler Lidar Vertical Velocity Statistics Value-Added Product (Technical

    Office of Scientific and Technical Information (OSTI)

    Report) | SciTech Connect Vertical Velocity Statistics Value-Added Product Citation Details In-Document Search Title: Doppler Lidar Vertical Velocity Statistics Value-Added Product Accurate height-resolved measurements of higher-order statistical moments of vertical velocity fluctuations are crucial for improved understanding of turbulent mixing and diffusion, convective initiation, and cloud life cycles. The Atmospheric Radiation Measurement (ARM) Climate Research Facility operates coherent

  16. CALCULATION OF STOPPING POWER VALUES AND RANGES OF FAST IONS.

    Energy Science and Technology Software Center (OSTI)

    2003-03-18

    STOPOW calculates a set of stopping power values and ranges of fast ions in matter for any materials. Furthermore STOPOW can calculate a set of values for one special auxiliary function (e.g. kinematic factors, track structure parameters, time of flight or correction factors in the stopping function) . The user chooses the physical units for stopping powers and ranges and the energy range for calculations.

  17. ARM Evaluation Product : Droplet Number Concentration Value-Added Product

    Office of Scientific and Technical Information (OSTI)

    (Dataset) | Data Explorer Evaluation Product : Droplet Number Concentration Value-Added Product Title: ARM Evaluation Product : Droplet Number Concentration Value-Added Product Cloud droplet number concentration is an important factor in understanding aerosol-cloud interactions. As aerosol concentration increases, it is expected that droplet number concentration, Nd, will increase and droplet size decrease, for a given liquid water path (Twomey 1977), which will greatly affect cloud albedo

  18. Value-added agriculture offers small agribusinesses additional income

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Connect Value of Energy Storage for Grid Applications Citation Details In-Document Search Title: Value of Energy Storage for Grid Applications This analysis evaluates several operational benefits of electricity storage, including load-leveling, spinning contingency reserves, and regulation reserves. Storage devices were simulated in a utility system in the western United States, and the operational costs of generation was compared to the same system without the added storage. This

  19. ARSCL Cloud Statistics - A Value-Added Product

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ARSCL Cloud Statistics - A Value-Added Product Y. Shi Pacific Northwest National Laboratory Richland, Washington M. A. Miller Brookhaven National Laboratory Upton, New York Introduction The active remote sensing of cloud layers (ARSCLs) value-added product (VAP) combines data from active remote sensors to produce an objective determination of cloud location, radar reflectivity, vertical velocity, and Doppler spectral width. Information about the liquid water path (LWP) in these clouds and the

  20. Prototype indicators of value added through public involvement

    SciTech Connect (OSTI)

    Lach, D.; Hixson, P.; Ramonas, L.

    1995-12-01

    As more managers realize that public input in public sector decision making is a given in the current political and social climate, many are turning to public involvement as a way to manage input so that it is beneficial to their decisions and projects. Public involvement is starting to become a familiar way of doing business for many Federal agencies and its contractors. Yet, many, if not most agency and contractor managers are still unclear about the value and costs that public involvement adds to their projects. Proponents claim that public involvement increases the acceptability of project goals by increasing stakeholders` knowledge about and involvement in decisions of importance to them. In spite of these assertions avowing the benefits of public involvement, proponents have not generated methods that demonstrate or provide evidence of such value added through incorporating public involvement into projects. As these questions about the value and costs of public involvement efforts increase, there is a pressing need to document the value and costs of public involvement for the participants in these processes--the stakeholders--and to present this information to decision makers in ways that help them assess the value and costs of managing public input through a public involvement program.

  1. Extended space expectation values in quantum dynamical system evolutions

    SciTech Connect (OSTI)

    Demiralp, Metin

    2014-10-06

    The time variant power series expansion for the expectation value of a given quantum dynamical operator is well-known and well-investigated issue in quantum dynamics. However, depending on the operator and Hamiltonian singularities this expansion either may not exist or may not converge for all time instances except the beginning of the evolution. This work focuses on this issue and seeks certain cures for the negativities. We work in the extended space obtained by adding all images of the initial wave function under the system Hamiltonians positive integer powers. This requires the introduction of certain appropriately defined weight operators. The resulting better convergence in the temporal power series urges us to call the new defined entities extended space expectation values even though they are constructed over certain weight operators and are somehow pseudo expectation values.

  2. RECOVERY OF THORIUM AND URANIUM VALUES FROM AQUEOUS SOLUTIONS

    DOE Patents [OSTI]

    Calkins, G.D.

    1958-02-18

    This patent deals with the separation and recovery of uranium from monazite sand. After initial treatment of the sand with sodium hydroxide, a precipitate is obtuined which contains the uranium, thorium, rare earths and some phosphorus. This precipitate is then dissolved in nitric acid. The bulk of the rare earths are removed from thls soiution by adding aa excess of alkali carbonate, causing precipitation of the rare earths together with part of the thorium present. The solution still contains a considerable amount of thorium, some rare earths, and practically all of the uranium originally present. Thorium and rare earth values are readily precipitated from such solution, and the uranium values thus isolated, by the addition of an excess hydrogen peroxide. The pH value of the solution is preferably adjusted to at least 9 prior to the addition of the peroxide.

  3. Arizona Quantity of Production Associated with Reported Wellhead Value

    U.S. Energy Information Administration (EIA) Indexed Site

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Arizona Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 26 10 0 0 0 0 1,360 1990's 2,125 1,225 730 548 691 500 405 401 411 439 2000's 332 266 243 426 306 211 588 634 503 695 2010's 165 - = No Data Reported; -- = Not Applicable; NA = Not Available; W = Withheld to avoid

  4. Illinois Quantity of Production Associated with Reported Wellhead Value

    U.S. Energy Information Administration (EIA) Indexed Site

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Illinois Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 1,030 1,530 1,324 1,887 1,371 1,338 1,477 1990's 677 466 346 250 333 0 0 0 0 0 2000's 0 0 NA 0 NA NA NA NA NA NA 2010's NA - = No Data Reported; -- = Not Applicable; NA = Not Available; W = Withheld to avoid

  5. Indiana Quantity of Production Associated with Reported Wellhead Value

    U.S. Energy Information Administration (EIA) Indexed Site

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Indiana Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 135 394 367 365 217 412 416 1990's 399 232 174 192 107 249 360 526 615 855 2000's 899 1,064 1,309 1,464 3,401 3,135 2,921 3,606 4,701 4,927 2010's 6,802 - = No Data Reported; -- = Not Applicable; NA = Not Available;

  6. Moisture Management for High R-Value Walls

    SciTech Connect (OSTI)

    Lepage, R.; Schumacher, C.; Lukachko, A.

    2013-11-01

    This report explains the moisture-related concerns for high R-value wall assemblies and discusses past Building America research work that informs this study. In this project, hygrothermal simulations were prepared for several common approaches to High R-value wall construction in six cities (Houston, Atlanta, Seattle, St. Louis, Chicago, and International Falls) representing a range of climate zones. The modeling program assessed the moisture durability of the wall assemblies based on three primary sources of moisture: construction moisture, air leakage condensation, and bulk water leakage; the report presents results of the study.

  7. Maryland Quantity of Production Associated with Reported Wellhead Value

    U.S. Energy Information Administration (EIA) Indexed Site

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Maryland Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 31 60 39 20 44 29 34 1990's 22 29 33 28 26 22 0 118 63 18 2000's 34 32 22 48 34 46 NA NA NA NA 2010's NA - = No Data Reported; -- = Not Applicable; NA = Not Available; W = Withheld to avoid disclosure of individual

  8. Missouri Quantity of Production Associated with Reported Wellhead Value

    U.S. Energy Information Administration (EIA) Indexed Site

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Missouri Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 4 4 4 4 4 4 1990's 7 19 27 14 8 16 25 5 0 2000's 0 0 0 0 0 0 2010's 0 - = No Data Reported; -- = Not Applicable; NA = Not Available; W = Withheld to avoid disclosure of individual company data. Release Date:

  9. Analytic Challenges to Valuing Energy Storage Workshop Report

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) has coordinated energy storage efforts from a research and development (R&D) perspective – identifying technology needs, metrics, and goals – but DOE and the research and analytic community have struggled with valuing storage at a systems level. Sixteen stakeholders and experts from across the electric power industry, research universities, national laboratories, and federal agencies were invited to join 8 DOE staff members in a workshop on September 19-20, 2011, in Washington, D.C. to discuss the current state of knowledge for grid-scale energy storage and, in particular, the methodologies to assess its value on the grid.

  10. SOLVENT EXTRACTION OF THORIUM VALUES FROM AQUEOUS SOLUTIONS

    DOE Patents [OSTI]

    Warf, J.C.

    1959-04-21

    The separation of thorium values from rare earth metals contained ln aqueous solutions by means of extraction with a water immiscible alkyl phosphate diluted with a hydrocarbon such as hexane is described. While the extraction according to this invention may be carried out from any aqueous salt solution, it is preferred to use solutions containing free mineral acid. Hydrochloric acid and in particular nitric acid are sultable in a concentration ranging from 0.1 to 7 normal. The higher acid concentration results in higher extraction values.

  11. Imaging of hard- and soft-tissue structure in the oral cavity by optical coherence tomography

    SciTech Connect (OSTI)

    Colston, Bill W.; Everett, Mathew J.; Da Silva, Luiz B. Otis, Linda L. Stroeve, Pieter Nathel, Howard

    1998-06-01

    We have developed a prototype optical coherent tomography (OCT) system for the imaging of hard and soft tissue in the oral cavity. High-resolution images of {ital in vitro} porcine periodontal tissues have been obtained with this system. The images clearly show the enamel{endash}cementum and the gingiva{endash}tooth interfaces, indicating OCT is a potentially useful technique for diagnosis of periodontal diseases. To our knowledge, this is the first application of OCT for imaging biologic hard tissue. {copyright} 1998 Optical Society of America

  12. The Value of Energy Storage for Grid Applications

    SciTech Connect (OSTI)

    Denholm, Paul; Jorgenson, Jennie; Hummon, Marissa; Jenkin, Thomas; Palchak, David; Kirby, Brendan; Ma, Ookie; O'Malley, Mark

    2013-05-01

    This analysis evaluates several operational benefits of electricity storage, including load-leveling, spinning contingency reserves, and regulation reserves. Storage devices were simulated in a utility system in the western United States, and the operational costs of generation was compared to the same system without the added storage. This operational value of storage was estimated for devices of various sizes, providing different services, and with several sensitivities to fuel price and other factors. Overall, the results followed previous analyses that demonstrate relatively low value for load-leveling but greater value for provision of reserve services. The value was estimated by taking the difference in operational costs between cases with and without energy storage and represents the operational cost savings from deploying storage by a traditional vertically integrated utility. The analysis also estimated the potential revenues derived from a merchant storage plant in a restructured market, based on marginal system prices. Due to suppression of on-/off-peak price differentials and incomplete capture of system benefits (such as the cost of power plant starts), the revenue obtained by storage in a market setting appears to be substantially less than the net benefit provided to the system. This demonstrates some of the additional challenges for storage deployed in restructured energy markets.

  13. Raman Lidar Profiles–Temperature (RLPROFTEMP) Value-Added Product

    SciTech Connect (OSTI)

    Newsom, RK; Sivaraman, C; McFarlane, SA

    2012-10-31

    The purpose of this document is to describe the Raman Lidar Profiles–Temperature (RLPROFTEMP) value-added product (VAP) and the procedures used to derive atmospheric temperature profiles from the raw RL measurements. Sections 2 and 4 describe the input and output variables, respectively. Section 3 discusses the theory behind the measurement and the details of the algorithm, including calibration and overlap correction.

  14. Value of Energy Storage for Grid Applications (Report Summary) (Presentation)

    SciTech Connect (OSTI)

    Denholm, P.; Jorgenson, J.; Hummon, M.; Jenkin, T.; Palchak, D.; Kirby, B.; Ma, O.; O'Malley, M.

    2013-06-01

    This analysis evaluates several operational benefits of electricity storage, including load-leveling, spinning contingency reserves, and regulation reserves. Storage devices were simulated in a utility system in the western United States, and the operational costs of generation was compared to the same system without the added storage. This operational value of storage was estimated for devices of various sizes, providing different services, and with several sensitivities to fuel price and other factors. Overall, the results followed previous analyses that demonstrate relatively low value for load-leveling but greater value for provision of reserve services. The value was estimated by taking the difference in operational costs between cases with and without energy storage and represents the operational cost savings from deploying storage by a traditional vertically integrated utility. The analysis also estimated the potential revenues derived from a merchant storage plant in a restructured market, based on marginal system prices. Due to suppression of on-/off-peak price differentials and incomplete capture of system benefits (such as the cost of power plant starts), the revenue obtained by storage in a market setting appears to be substantially less than the net benefit provided to the system. This demonstrates some of the additional challenges for storage deployed in restructured energy markets.

  15. Earned Value Management System (EVMS) Corrective Action Standard Operating

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Procedure | Department of Energy (EVMS) Corrective Action Standard Operating Procedure Earned Value Management System (EVMS) Corrective Action Standard Operating Procedure This EVMS Corrective Action Standard Operating Procedure (ECASOP) serves as PM's primary reference for development of Corrective Action Requests (CARs) and Continuous Improvement Opportunities (CIOs), as well as the assessment of contractors procedures and implementation associated with Variance Analysis Reports (VARs) and

  16. Value of Underground Storage in Today's Natural Gas Industry, The

    Reports and Publications (EIA)

    1995-01-01

    This report explores the significant and changing role of storage in the industry by examining the value of natural gas storage; short-term relationships between prices, storage levels, and weather; and some longer term impacts of the Federal Energy Regulatory Commission's (FERC) Order 636.

  17. Secretary Chu's Oral Statement on the FY13 Budget Request to the Senate Energy and Natural Resources Committee-- As Prepared for Delivery

    Broader source: Energy.gov [DOE]

    Secretary Chu's oral statement, as prepared for delivery, on the Energy Department's FY13 Budget Request to the Senate Committee on Energy and Natural Resources.

  18. Commercial Demonstration of Wood Recovery, Recycling, and Value Adding Technologies

    SciTech Connect (OSTI)

    Auburn Machinery, Inc.

    2004-07-15

    This commercial demonstration project demonstrated the technical feasibility of converting low-value, underutilized and waste stream solid wood fiber material into higher valued products. With a growing need to increase product/production yield and reduce waste in most sawmills, few recovery operations and practically no data existed to support the viability of recovery operations. Prior to our efforts, most all in the forest products industry believed that recovery was difficult, extremely labor intensive, not cost effective, and that recovered products had low value and were difficult to sell. This project provided an opportunity for many within the industry to see through demonstration that converting waste stream material into higher valued products does in fact offer a solution. Our work, supported by the U.S. Department of Energy, throughout the project aimed to demonstrate a reasonable approach to reducing the millions of recoverable solid wood fiber tons that are annually treated as and converted into low value chips, mulch and fuel. Consequently sawmills continue to suffer from reduced availability of forest resources, higher raw material costs, growing waste disposal problems, increased global competition, and more pressure to operate in an Environmentally Friendly manner. It is our belief (based upon the experience of this project) that the successful mainstreaming of the recovery concept would assist in alleviating this burden as well as provide for a realistically achievable economic benefit to those who would seriously pursue the concept and tap into the rapidly growing ''GREEN'' building marketplace. Ultimately, with participation and aggressive pursuit of the recovery concept, the public would benefit in that: (1) Landfill/disposal waste volume could be reduced adding greater life to existing municipal landfill sites thereby minimizing the need to prematurely license and open added facilities. Also, there would be a cost avoidance benefit associated to what would have been the added municipal (community) management costs involved with maintaining closed landfills. (2) With greater quantities of recovered material being returned to and integrated into manufacturing and the marketplace, reduced demand upon virgin wood sources could help lead the way to promoting improved relations and environmental balance between producers and consumers further expanding the value of our natural resource without adding environmental burden.

  19. Tennessee Quantity of Production Associated with Reported Wellhead Value

    U.S. Energy Information Administration (EIA) Indexed Site

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Tennessee Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 3,950 5,022 4,686 3,464 2,707 2,100 1,900 1990's 2,067 1,856 1,770 1,660 1,990 1,820 1,690 1,510 1,420 1,230 2000's 1,150 2,000 2,050 1,803 2,100 2,200 2,663 3,942 4,700 5,478 2010's 5,144 - = No Data Reported; --

  20. Texas Quantity of Production Associated with Reported Wellhead Value

    U.S. Energy Information Administration (EIA) Indexed Site

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Texas Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 6,227,995 6,630,246 6,367,936 6,465,964 6,414,021 6,386,544 6,276,968 1990's 6,476,032 6,066,256 5,893,069 5,769,437 5,834,671 5,592,323 4,684,140 4,716,304 4,777,945 5,719,128 2000's 5,869,901 5,159,233 5,166,315

  1. Utah Quantity of Production Associated with Reported Wellhead Value

    U.S. Energy Information Administration (EIA) Indexed Site

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Utah Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 63,158 74,698 52,324 21,491 48,654 49,378 58,356 1990's 57,098 62,241 86,682 93,894 154,907 153,804 168,944 174,275 190,230 194,413 2000's 218,283 215,527 250,118 202,784 250,261 267,766 319,268 NA 276,340 389,830

  2. Virginia Quantity of Production Associated with Reported Wellhead Value

    U.S. Energy Information Administration (EIA) Indexed Site

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Virginia Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 4,342 8,928 15,041 15,427 19,223 18,424 17,935 1990's 14,283 14,906 24,734 37,840 50,259 49,818 0 0 0 0 2000's 0 0 0 0 NA NA NA NA NA NA 2010's NA - = No Data Reported; -- = Not Applicable; NA = Not Available; W =

  3. Arkansas Quantity of Production Associated with Reported Wellhead Value

    U.S. Energy Information Administration (EIA) Indexed Site

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Arkansas Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 78,097 75,575 86,552 68,206 42,688 102,046 42,226 1990's 99,456 83,864 85,177 122,596 24,326 180,117 76,671 71,449 61,012 54,382 2000's 55,057 16,901 161,871 166,329 183,299 190,533 193,491 269,886 446,551 680,613

  4. California Quantity of Production Associated with Reported Wellhead Value

    U.S. Energy Information Administration (EIA) Indexed Site

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) California Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 282,639 343,079 361,739 329,366 346,720 327,399 283,509 1990's 275,738 211,841 195,515 76,381 199,649 263 37,823 219,216 264,810 382,715 2000's 323,864 328,778 309,399 293,691 276,520 274,817 278,933 268,016

  5. Colorado Quantity of Production Associated with Reported Wellhead Value

    U.S. Energy Information Administration (EIA) Indexed Site

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Colorado Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 139,820 143,552 126,037 163,684 164,557 191,544 216,737 1990's 242,997 271,159 314,105 388,016 441,343 511,513 559,473 637,375 696,321 705,477 2000's 735,332 800,712 819,205 989,678 1,058,383 1,106,993 1,170,819

  6. Florida Quantity of Production Associated with Reported Wellhead Value

    U.S. Energy Information Administration (EIA) Indexed Site

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Florida Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 25,630 18,897 13,162 3,004 1,893 1,883 1,437 1990's 1,443 2,096 3,849 2,612 4,940 3,545 0 0 0 0 2000's 0 0 NA 0 NA NA NA NA NA NA 2010's NA - = No Data Reported; -- = Not Applicable; NA = Not Available; W = Withheld

  7. Kansas Quantity of Production Associated with Reported Wellhead Value

    U.S. Energy Information Administration (EIA) Indexed Site

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Kansas Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 366,189 494,641 532,092 465,695 458,426 577,815 588,757 1990's 555,187 630,155 640,583 668,640 714,659 721,436 712,796 678,652 603,586 553,419 2000's 525,430 480,145 454,901 418,893 397,121 377,229 372,029 366,859

  8. New Mexico Quantity of Production Associated with Reported Wellhead Value

    U.S. Energy Information Administration (EIA) Indexed Site

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) New Mexico Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 884,517 925,298 880,307 676,886 790,639 752,629 833,593 1990's 949,735 1,029,824 1,274,220 1,489,052 1,510,804 1,480,327 1,553,103 1,540,157 1,483,370 1,511,671 2000's 1,685,664 1,670,644 1,614,045 1,576,639

  9. Ohio Quantity of Production Associated with Reported Wellhead Value

    U.S. Energy Information Administration (EIA) Indexed Site

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Ohio Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 149,096 184,651 180,458 180,287 164,960 166,690 159,730 1990's 154,619 146,189 143,381 135,939 130,855 125,085 119,251 116,246 108,542 102,505 2000's 98,551 97,272 103,158 120,081 119,847 83,523 86,315 88,095 84,858

  10. Oklahoma Quantity of Production Associated with Reported Wellhead Value

    U.S. Energy Information Administration (EIA) Indexed Site

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Oklahoma Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 1,730,061 1,985,869 1,936,341 1,917,493 2,004,797 2,106,632 2,185,204 1990's 2,186,153 2,119,161 1,937,224 2,005,971 1,879,257 1,765,788 1,751,487 1,452,233 1,644,531 1,577,961 2000's 1,612,890 1,477,058 1,456,375

  11. Oregon Quantity of Production Associated with Reported Wellhead Value

    U.S. Energy Information Administration (EIA) Indexed Site

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Oregon Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 3 2,790 4,080 4,600 3,800 4,000 2,500 1990's 2,815 2,741 2,580 4,003 3,221 1,923 1,439 1,173 1,067 1,291 2000's 1,214 1,069 837 688 467 433 NA 390 751 751 2010's 1,376 - = No Data Reported; -- = Not Applicable; NA =

  12. Pennsylvania Quantity of Production Associated with Reported Wellhead Value

    U.S. Energy Information Administration (EIA) Indexed Site

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Pennsylvania Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 118,372 166,342 150,234 159,889 163,318 167,089 191,774 1990's 177,609 152,500 138,675 189,443 187,113 177,139 0 0 0 0 2000's 0 0 0 0 NA NA NA NA NA NA 2010's NA - = No Data Reported; -- = Not Applicable; NA =

  13. Kentucky Quantity of Production Associated with Reported Wellhead Value

    U.S. Energy Information Administration (EIA) Indexed Site

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Kentucky Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 46,720 61,518 73,126 80,195 70,125 44,725 72,417 1990's 75,333 78,904 79,690 86,966 73,081 74,754 81,435 79,547 81,868 76,770 2000's 81,545 81,723 88,259 87,609 94,259 92,795 95,320 95,437 114,116 NA 2010's 135,355

  14. Louisiana Quantity of Production Associated with Reported Wellhead Value

    U.S. Energy Information Administration (EIA) Indexed Site

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Louisiana Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 3,149,192 3,650,412 3,179,306 2,986,468 3,243,795 3,158,903 3,066,789 1990's 3,780,551 3,355,867 3,404,963 3,454,646 3,562,360 3,709,015 3,976,305 5,398,216 5,410,523 5,265,670 2000's 3,587,815 1,529,733 1,365,925

  15. Michigan Quantity of Production Associated with Reported Wellhead Value

    U.S. Energy Information Administration (EIA) Indexed Site

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Michigan Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 138,910 144,537 131,855 127,287 146,996 146,145 155,988 1990's 106,193 189,497 190,637 199,746 216,268 238,203 245,740 305,950 278,076 277,364 2000's 296,556 275,036 274,476 236,987 259,681 261,112 NA NA 153,130

  16. Mississippi Quantity of Production Associated with Reported Wellhead Value

    U.S. Energy Information Administration (EIA) Indexed Site

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Mississippi Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 211,116 206,871 178,426 197,217 195,299 196,912 148,167 1990's 149,012 126,637 129,340 131,450 105,646 95,349 88,805 98,075 88,723 83,232 2000's 70,965 76,986 112,979 133,901 145,692 52,923 60,531 73,460 96,641

  17. Montana Quantity of Production Associated with Reported Wellhead Value

    U.S. Energy Information Administration (EIA) Indexed Site

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Montana Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 47,751 47,534 46,113 42,203 42,814 47,748 52,044 1990's 45,998 48,075 50,359 58,810 51,953 46,739 46,868 50,409 51,967 55,780 2000's 67,294 78,493 86,075 86,027 90,771 101,666 106,843 110,942 802,619 293,941 2010's

  18. Nebraska Quantity of Production Associated with Reported Wellhead Value

    U.S. Energy Information Administration (EIA) Indexed Site

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Nebraska Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 2,091 2,300 1,944 1,403 1,261 910 878 1990's 793 785 1,177 1,375 2,098 1,538 1,332 1,194 1,285 1,049 2000's 879 883 892 1,168 1,172 1,172 NA 1,555 3,082 2,908 2010's 2,231 - = No Data Reported; -- = Not Applicable;

  19. Alabama Quantity of Production Associated with Reported Wellhead Value

    U.S. Energy Information Administration (EIA) Indexed Site

    (Million Cubic Feet) Alabama Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Alabama Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 59,051 56,685 42,925 34,164 35,674 45,488 41,614 1990's 37,229 35,972 51,219 75,474 70,489 54,964 493,069 583,370 560,414 544,020 2000's 521,215 376,241 370,753 348,722 304,212 285,237 274,176 259,062

  20. Alaska Quantity of Production Associated with Reported Wellhead Value

    U.S. Energy Information Administration (EIA) Indexed Site

    (Million Cubic Feet) Alaska Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Alaska Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 211,569 211,579 222,637 304,841 271,120 228,284 192,760 1990's 191,798 200,557 206,259 224,786 201,891 227,797 193,278 191,017 192,982 186,727 2000's 189,896 197,735 200,871 199,616 413,667 502,887 494,323

  1. Graphics processing units accelerated semiclassical initial value representation molecular dynamics

    SciTech Connect (OSTI)

    Tamascelli, Dario; Dambrosio, Francesco Saverio [Dipartimento di Fisica, Universit degli Studi di Milano, via Celoria 16, 20133 Milano (Italy)] [Dipartimento di Fisica, Universit degli Studi di Milano, via Celoria 16, 20133 Milano (Italy); Conte, Riccardo [Department of Chemistry and Cherry L. Emerson Center for Scientific Computation, Emory University, Atlanta, Georgia 30322 (United States)] [Department of Chemistry and Cherry L. Emerson Center for Scientific Computation, Emory University, Atlanta, Georgia 30322 (United States); Ceotto, Michele, E-mail: michele.ceotto@unimi.it [Dipartimento di Chimica, Universit degli Studi di Milano, via Golgi 19, 20133 Milano (Italy)] [Dipartimento di Chimica, Universit degli Studi di Milano, via Golgi 19, 20133 Milano (Italy)

    2014-05-07

    This paper presents a Graphics Processing Units (GPUs) implementation of the Semiclassical Initial Value Representation (SC-IVR) propagator for vibrational molecular spectroscopy calculations. The time-averaging formulation of the SC-IVR for power spectrum calculations is employed. Details about the GPU implementation of the semiclassical code are provided. Four molecules with an increasing number of atoms are considered and the GPU-calculated vibrational frequencies perfectly match the benchmark values. The computational time scaling of two GPUs (NVIDIA Tesla C2075 and Kepler K20), respectively, versus two CPUs (Intel Core i5 and Intel Xeon E5-2687W) and the critical issues related to the GPU implementation are discussed. The resulting reduction in computational time and power consumption is significant and semiclassical GPU calculations are shown to be environment friendly.

  2. Wyoming Quantity of Production Associated with Reported Wellhead Value

    U.S. Energy Information Administration (EIA) Indexed Site

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Wyoming Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 395,656 447,615 416,565 352,858 407,863 471,095 623,915 1990's 690,356 711,799 765,254 63,667 14,283 12,449 27,821 719,933 1,004,020 1,079,375 2000's 1,240,038 1,359,868 1,533,724 1,561,322 1,724,725 1,729,760

  3. Pumped Storage Hydropower (Detailed Analysis to Demonstrate Value)-Modeling and Analysis of Value of Advanced Pumped Storage Hydropower in the U.S.

    Broader source: Energy.gov [DOE]

    Pumped Storage Hydropower (Detailed Analysis to Demonstrate Value)-Modeling and Analysis of Value of Advanced Pumped Storage Hydropower in the U.S.

  4. Organic Aerosol Component (OACOMP) Value-Added Product Report

    SciTech Connect (OSTI)

    Fast, J; Zhang, Q; Tilp, A; Shippert, T; Parworth, C; Mei, F

    2013-08-23

    Significantly improved returns in their aerosol chemistry data can be achieved via the development of a value-added product (VAP) of deriving OA components, called Organic Aerosol Components (OACOMP). OACOMP is primarily based on multivariate analysis of the measured organic mass spectral matrix. The key outputs of OACOMP are the concentration time series and the mass spectra of OA factors that are associated with distinct sources, formation and evolution processes, and physicochemical properties.

  5. ARM Climate Research Facility Quarterly Value-Added Product Report

    SciTech Connect (OSTI)

    Sivaraman, Chitra

    2013-07-31

    The purpose of this report is to provide a concise status update for value-added products (VAP) implemented by the Atmospheric Radiation Measurement Climate Research Facility. The report is divided into the following sections: (1) new VAPs for which development has begun, (2) progress on existing VAPs, (3) future VAPs that have been recently approved, (4) other work that leads to a VAP, and (5) top requested VAPs from the archive.

  6. COLLOQUIUM: History, Applications, Numerical Values and Problems with the

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Calculation of EROI - Energy Return on (Energy) Investment | Princeton Plasma Physics Lab March 2, 2016, 4:15pm to 5:30pm Colloquia MBG Auditorium COLLOQUIUM: History, Applications, Numerical Values and Problems with the Calculation of EROI - Energy Return on (Energy) Investment Professor Charles Hall State University of NY College of Environmental Science and Forestry Plants and animals are subjected to fierce selective pressure to do the "right thing" energetically, that is to

  7. Microsoft Word - Web Posting for Earned Value Management.doc

    Office of Environmental Management (EM)

    CONTRACTOR EARNED VALUE MANAGEMENT SYSTEM CERTIFICATION STATUS (as of May 11, 2016) DOE Office (Geographic Site) Contract Name Contractor Name Principal Companies Certified Green = Yes Red = No Carlsbad Field Office (Carlsbad, NM) Waste Isolation Pilot Project Management and Operations Nuclear Waste Partnership, LLC URS Energy and Construction, Inc. Babcock & Wilcox Technical Services Group, LLC AREVA Federal Services, LLC Savannah River (Aiken, SC) Salt Waste Processing Facility Parsons

  8. 2D Gridded Surface Data Value-Added Product

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 2D Gridded Surface Data Value-Added Product Q Tang S Xie July 2015 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned

  9. ARM Value-Added Cloud Products: Description and Status

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Value-Added Cloud Products: Description and Status M. A. Miller, K. L. Johnson, and D. T. Troyan Brookhaven National Laboratory Upton, New York E. E. Clothiaux Pennsylvania State University University Park, Pennsylvania E. J. Mlawer Atmospheric and Environmental Research, Inc. Cambridge, Massachusetts G. G. Mace University of Utah Salt Lake City, Utah Introduction The Atmospheric Radiation Measurement (ARM) Program operates a variety of state-of-the-art active and passive remote sensors at its

  10. Recovery of aluminum and other metal values from fly ash

    DOE Patents [OSTI]

    McDowell, W.J.; Seeley, F.G.

    1979-11-01

    The invention relates to a method for improving the acid leachability of aluminum and other metal values found in fly ash which comprises sintering the fly ash, prior to acid leaching, with a calcium sulfate-containing composition at a temperature at which the calcium sulfate is retained in said composition during sintering and for a time sufficient to quantitatively convert the aluminum in said fly ash into an acid-leachable form.

  11. Recovery of aluminum and other metal values from fly ash

    DOE Patents [OSTI]

    McDowell, William J.; Seeley, Forest G.

    1981-01-01

    The invention described herein relates to a method for improving the acid leachability of aluminum and other metal values found in fly ash which comprises sintering the fly ash, prior to acid leaching, with a calcium sulfate-containing composition at a temperature at which the calcium sulfate is retained in said composition during sintering and for a time sufficient to quantitatively convert the aluminum in said fly ash into an acid-leachable form.

  12. AskIT Service Desk Support Value Model

    SciTech Connect (OSTI)

    Ashcraft, Phillip Lynn; Cummings, Susan M.; Fogle, Blythe G.; Valdez, Christopher D.

    2015-08-07

    The value model discussed herein provides an accurate and simple calculation of the funding required to adequately staff the AskIT Service Desk (SD).The model is incremental only technical labor cost is considered.All other costs, such as management, equipment, buildings, HVAC, and training are considered common elements of providing any labor related IT Service. Depending on the amount of productivity loss and the number of hours the defect was unresolved, the value of resolving work from the SD is unquestionably an economic winner; the average cost of $16 per SD resolution can commonly translate to cost avoidance exceeding well over $100. Attempting to extract too much from the SD will likely create a significant downside. The analysis used to develop the value model indicates that the utilization of the SD is very high (approximately 90%).As a benchmark, consider a comment from a manager at Vitalyst (a commercial IT service desk) that their utilization target is approximately 60%.While high SD utilization is impressive, over the long term it is likely to cause unwanted consequences to staff such as higher turnover, illness, or burnout.A better solution is to staff the SD so that analysts have time to improve skills through training, develop knowledge, improve processes, collaborate with peers, and improve customer relationship skills.

  13. High-Performance Buildings Value, Messaging, Financial and Policy Mechanisms

    SciTech Connect (OSTI)

    McCabe, Molly

    2011-02-22

    At the request of the Pacific Northwest National Laboratory, an in-depth analysis of the rapidly evolving state of real estate investments, high-performance building technology, and interest in efficiency was conducted by HaydenTanner, LLC, for the U.S. Department of Energy (DOE) Building Technologies Program. The analysis objectives were to evaluate the link between high-performance buildings and their market value to identify core messaging to motivate owners, investors, financiers, and others in the real estate sector to appropriately value and deploy high-performance strategies and technologies across new and existing buildings to summarize financial mechanisms that facilitate increased investment in these buildings. To meet these objectives, work consisted of a literature review of relevant writings, examination of existing and emergent financial and policy mechanisms, interviews with industry stakeholders, and an evaluation of the value implications through financial modeling. This report documents the analysis methodology and findings, conclusion and recommendations. Its intent is to support and inform the DOE Building Technologies Program on policy and program planning for the financing of high-performance new buildings and building retrofit projects.

  14. Challenges in determining b value in the Northwest Geysers

    SciTech Connect (OSTI)

    Saltiel, S.; Boyle, K.; Majer, E.

    2011-02-01

    Past analyses of the Gutenberg-Richter b-value in the Geysers and other geothermal settings have revealed a deviation from the assumed linear relationship in log space between magnitude and the number of earthquakes. In this study of the Northwest Geysers, we found a gently-sloping discontinuity in the b-value curve. This is especially apparent when comparing the least-squares fit (LSQ) of the curve to the fit obtained by the maximum likelihood estimation (MLE), a widely-respected method of analyzing magnitude-frequency relationships. This study will describe the assumptions made when using each of these two methods and will also explore how they can be used in conjunction to investigate the characteristics of the observed b-value curve. To understand whether slope-fit differences in the LSQR and MLE methods is due to physical properties of the system or due to artifacts from errors in sampling, it is extremely important to consider the catalog completeness, magnitude bin size, number of events, and differences in source mechanisms for the events comprising the study volume. This work will hopefully lead to informative interpretations of frequency-magnitude curves for the Northwest Geysers, a geothermal area of ongoing high-volume coldwater injection and steam production. Through this statistical investigation of the catalog contents, we hope to better understand the dominant source mechanisms and the role of injected fluids in the creation of seismic clustering around nearly 60 wells of varying depths and injection volumes.

  15. Comprehensive Summary and Analysis of Oral and Written Scoping Comments on the Hawaii Geothermal Project EIS (DOE Review Draft)

    SciTech Connect (OSTI)

    1992-09-18

    This report contains summaries of the oral and written comments received during the scoping process for the Hawaii Geothermal Project (HGP) Environmental Impact Statement (EIS). Oral comments were presented during public scoping meetings; written comments were solicited at the public scoping meetings and in the ''Advance Notice of Intent'' and ''Notice of Intent'' (published in the ''Federal Register'') to prepare the HGP EIS. This comprehensive summary of scoping inputs provides an overview of the issues that have been suggested for inclusion in the HGP EIS.

  16. Vocational Rehabilitation -Value Added: Explaining What We Do,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Vocational Rehabilitation -Value Added: Explaining What We Do, Craig Bock, MA, CRC Washington State IARP Quarterly Newsletter - June 2009 If you have an injury at work, do you know what happens next or how you would navigate the Workers' Compensation system should you need to? What does RCW 51.32.095 (state law) and WAC 296-19A-070 (administrative rules) mean to you? If you could not return to your job and had permanent physical or cognitive restrictions who would help you explore your return to

  17. DEVELOPMENT OF VADOSE-ZONE HYDRAULIC PARAMETER VALUES

    SciTech Connect (OSTI)

    ROGERS PM

    2008-01-21

    Several approaches have been developed to establish a relation between the soil-moisture retention curve and readily available soil properties. Those relationships are referred to as pedotransfer functions. Described in this paper are the rationale, approach, and corroboration for use of a nonparametric pedotransfer function for the estimation of soil hydraulic-parameter values at the yucca Mountain area in Nevada for simulations of net infiltration. This approach, shown to be applicable for use at Yucca Mountain, is also applicable for use at the Hanford Site where the underlying data were collected.

  18. The Value of Improved Short-Term Wind Power Forecasting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Value of Improved Short- Term Wind Power Forecasting B.-M. Hodge and A. Florita National Renewable Energy Laboratory J. Sharp Sharply Focused, LLC M. Margulis and D. Mcreavy Lockheed Martin Technical Report NREL/TP-5D00-63175 February 2015 NREL is a national laboratory of the U.S. Department of Energy Office of Energy Efficiency & Renewable Energy Operated by the Alliance for Sustainable Energy, LLC This report is available at no cost from the National Renewable Energy Laboratory (NREL)

  19. Decommissioning Cost Estimating Factors And Earned Value Integration

    SciTech Connect (OSTI)

    Sanford, P.C.; Cimmarron, E.

    2008-07-01

    The Rocky Flats 771 Project progressed from the planning stage of decommissioning a plutonium facility, through the strip-out of highly-contaminated equipment, removal of utilities and structural decontamination, and building demolition. Actual cost data was collected from the strip-out activities and compared to original estimates, allowing the development of cost by equipment groupings and types and over time. Separate data was developed from the project control earned value reporting and compared with the equipment data. The paper discusses the analysis to develop the detailed factors for the different equipment types, and the items that need to be considered during characterization of a similar facility when preparing an estimate. The factors are presented based on direct labor requirements by equipment type. The paper also includes actual support costs, and examples of fixed or one-time start-up costs. The integration of the estimate and the earned value system used for the 771 Project is also discussed. The paper covers the development of the earned value system as well as its application to a facility to be decommissioned and an existing work breakdown structure. Lessons learned are provided, including integration with scheduling and craft supervision, measurement approaches, and verification of scope completion. In summary: The work of decommissioning the Rocky Flats 771 Project process equipment was completed in 2003. Early in the planning process, we had difficulty in identifying credible data and implementing processes for estimating and controlling this work. As the project progressed, we were able to collect actual data on the costs of removing plutonium contaminated equipment from various areas over the life of this work and associate those costs with individual pieces of equipment. We also were able to develop and test out a system for measuring the earned value of a decommissioning project based on an evolving estimate. These were elements that would have been useful to us in our early planning process, and we would expect that they would find application elsewhere as the DOE weapons complex and some commercial nuclear facilities move towards closure. (authors)

  20. Quantifying the Value of CSP with Thermal Energy Storage

    Broader source: Energy.gov [DOE]

    This PowerPoint slide deck was originally presented at the SunShot Concentrating Solar Power Program Review by Paul Denholm and Mark Mehos of NREL on April 23, 2013. Entitled "Quantifying the Value of CSP with Thermal Energy Storage," the presenters seek to answer the question, "What is the addition of TES to a CSP plant actually worth?" Ultimately they conclude that CSP with TES can actually complement other variable generation sources including solar PV and act as an enabling technology to achieve higher overall penetration of renewable energy.

  1. Valuing the Environmental Benefits of Urban WaterConservation

    SciTech Connect (OSTI)

    Coughlin, Katie M.; Bolduc, Chris A.; Chan, Peter T.; Dunham-Whitehead, C.; Van Buskirk, R.D.

    2007-05-01

    This report documents a project undertaken for theCalifornia Urban Water Conservation Council (the Council) to create a newmethod of accounting for the diverse environmental benefits of raw watersavings. The environmental benefits (EB) model was designed to providewater utilities with a practical tool that they can use to assign amonetary value to the benefits that may accrue from implementing any ofthe Council-recommended Best Management Practices. The model treats onlyenvironmental services associated directly with water, and is intended tocover miscellaneous impacts that are not currently accounted for in anyother cost-benefit analysis.

  2. Optimum value of original events on the PEPT technique

    SciTech Connect (OSTI)

    Sadremomtaz, Alireza; Taherparvar, Payvand

    2011-12-26

    Do Positron emission particle tracking (PEPT) has been used to track the motion of a single radioactively labeled tracer particle within a bed of similar particles. In this paper, the effect of the original event fraction on the results precise in two experiments has been reviewed. Results showed that the algorithm can no longer distinguish some corrupt trajectories, in addition to; further iteration reduces the statistical significance of the sample without improving its quality. Results show that the optimum value of trajectories depends on the type of experiment.

  3. Defining and Computing a Valued Based Cyber-Security Measure

    SciTech Connect (OSTI)

    Aissa, Anis Ben; Abercrombie, Robert K; Sheldon, Frederick T; Mili, Ali

    2012-01-01

    In earlier work, we presented a value based measure of cybersecurity that quantifies the security of a system in concrete terms, specifically, in terms of how much each system stakeholder stands to lose (in dollars per hour of operation) as a result of security threats and system vulnerabilities; our metric varies according to the stakes that each stakeholder has in meeting each security requirement. In this paper, we discuss the specification and design of a system that collects, updates, and maintains all the information that pertains to estimating our cybersecurity measure, and offers stakeholders quantitative means to make security-related decisions.

  4. Defining and Computing a Value Based Cyber-Security Measure

    SciTech Connect (OSTI)

    Aissa, Anis Ben; Abercrombie, Robert K; Sheldon, Frederick T; Mili, Ali

    2011-01-01

    In past work, we presented a value based measure of cybersecurity that quantifies the security of a system in concrete terms, specifically, in terms of how much each system stakeholder stands to lose (in dollars per hour of operation) as a result of security threats and system vulnerabilities\\; our metric varies according to the stakes that each stakeholder has in meeting each security requirement. In this paper we discuss the specification and design of a system that collects, updates and maintains all the information that pertains to estimating our cybersecurity measure, and offers stakeholders quantitative means to make security-related decisions.

  5. Method of absorbance correction in a spectroscopic heating value sensor

    DOE Patents [OSTI]

    Saveliev, Alexei; Jangale, Vilas Vyankatrao; Zelepouga, Sergeui; Pratapas, John

    2013-09-17

    A method and apparatus for absorbance correction in a spectroscopic heating value sensor in which a reference light intensity measurement is made on a non-absorbing reference fluid, a light intensity measurement is made on a sample fluid, and a measured light absorbance of the sample fluid is determined. A corrective light intensity measurement at a non-absorbing wavelength of the sample fluid is made on the sample fluid from which an absorbance correction factor is determined. The absorbance correction factor is then applied to the measured light absorbance of the sample fluid to arrive at a true or accurate absorbance for the sample fluid.

  6. RECOVERY OF URANIUM VALUES FROM URANIUM BEARING RAW MATERIALS

    DOE Patents [OSTI]

    Michal, E.J.; Porter, R.R.

    1959-06-16

    Uranium leaching from ground uranium-bearing raw materials using MnO/sub 2/ in H/sub 2/SO/sub 4/ is described. The MnO/sub 2/ oxidizes U to the leachable hexavalent state. The MnO/sub 2/ does not replace Fe normally added, because the Fe complexes P and catalyzes the MnO/sub 2/ reaction. Three examples of continuous processes are given, but batch operation is also possible. The use of MnO/sub 2/ makes possible recovery of very low U values. (T.R.H.)

  7. The use of probability techniques in value-based planning

    SciTech Connect (OSTI)

    Rau, N.S. (National Renewable Energy Lab., Golden, CO (United States))

    1994-11-01

    Present techniques used in value-based planning do not properly represent neither the durations of capacity outage nor the effects of outage on post-interruption demand. Generation outage models do not relate the expected quantum of shortages to particular durations of outage. A model is proposed to compute this expectation by using the generator outage statistics in its entirety. The application of this model to the IEEE test system gave different results, depending on which outage cost data were used. Consequently, there is a need for a uniform procedure to report outage costs. A bottom-up procedure based on end use is proposed as a possibility.

  8. Fuji2011_BusinessValueOfTape.ppt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Leveraging the Business Value of Tape Jason Hick jhick@lbl.gov NERSC Storage Systems Group Fujifilm Global IT Executive Summit June 8-10, 2011 *! Operated by UC for the DOE *! NERSC serves a large population -! Approximately 4000 users, 400 projects, 500 codes -! Focus on "unique" resources *! High-end computing systems *! High-end storage systems -! Large shared GPFS (a.k.a. NGF) -! Large archive (a.k.a. HPSS) *! Interface to high speed networking -! Center-wide 10Gb -! Testing 100Gb

  9. Signal evaluations using singular value decomposition for Thomson scattering diagnostics

    SciTech Connect (OSTI)

    Tojo, H., E-mail: tojo.hiroshi@jaea.go.jp; Yatsuka, E.; Hatae, T.; Itami, K. [Japan Atomic Energy Agency, 801-1 Mukoyama, Naka 311-0193 (Japan); Yamada, I.; Yasuhara, R.; Funaba, H.; Hayashi, H. [National Institute for Fusion Science, 322-6 Oroshi-cho, Toki 509-5292 (Japan)

    2014-11-15

    This paper provides a novel method for evaluating signal intensities in incoherent Thomson scattering diagnostics. A double-pass Thomson scattering system, where a laser passes through the plasma twice, generates two scattering pulses from the plasma. Evaluations of the signal intensities in the spectrometer are sometimes difficult due to noise and stray light. We apply the singular value decomposition method to Thomson scattering data with strong noise components. Results show that the average accuracy of the measured electron temperature (T{sub e}) is superior to that of temperature obtained using a low-pass filter (<20 MHz) or without any filters.

  10. Moisture Management for High R-Value Walls

    SciTech Connect (OSTI)

    Lepage, R.; Schumacher, C.; Lukachko, A.

    2013-11-01

    The following report explains the moisture-related concerns for High R-value wall assemblies and discusses past Building America research work that informs this study. Hygrothermal simulations were prepared for several common approaches to High R-value wall construction in six cities (Houston, Atlanta, Seattle, St. Louis, Chicago, and International Falls) representing a range of climate zones (2, 3, 4C, 4, 5A, and 7, respectively). The simulations are informed by experience gained from past research in this area and validated by field measurement and forensic experience. The modeling program was developed to assess the moisture durability of the wall assemblies based on three primary sources of moisture: construction moisture, air leakage condensation, and bulk water leakage. The peak annual moisture content of the wood based exterior sheathing was used to comparatively analyze the response to the moisture loads for each of the walls in each given city. Walls which experienced sheathing moisture contents between 20% and 28% were identified as risky, whereas those exceeding 28% were identified as very high risk. All of the wall assemblies perform well under idealized conditions. However, only the walls with exterior insulation, or cavity insulation which provides a hygrothermal function similar to exterior insulation, perform adequately when exposed to moisture loads. Walls with only cavity insulation are particularly susceptible to air leakage condensation. None of the walls performed well when a precipitation based bulk water leak was introduced to the backside of the sheathing, emphasizing the importance of proper flashing details.

  11. Using physiologically based pharmacokinetic modeling to address nonlinear kinetics and changes in rodent physiology and metabolism due to aging and adaptation in deriving reference values for propylene glycol methyl ether and propylene glycol methyl ether acetate.

    SciTech Connect (OSTI)

    Kirman, C R.; Sweeney, Lisa M.; Corley, Rick A.; Gargas, M L.

    2005-04-01

    Reference values, including an oral reference dose (RfD) and an inhalation reference concentration (RfC), were derived for propylene glycol methyl ether (PGME), and an oral RfD was derived for its acetate (PGMEA). These values were based upon transient sedation observed in F344 rats and B6C3F1 mice during a two-year inhalation study. The dose-response relationship for sedation was characterized using internal dose measures as predicted by a physiologically based pharmacokinetic (PBPK) model for PGME and its acetate. PBPK modeling was used to account for changes in rodent physiology and metabolism due to aging and adaptation, based on data collected during weeks 1, 2, 26, 52, and 78 of a chronic inhalation study. The peak concentration of PGME in richly perfused tissues was selected as the most appropriate internal dose measure based upon a consideration of the mode of action for sedation and similarities in tissue partitioning between brain and other richly perfused tissues. Internal doses (peak tissue concentrations of PGME) were designated as either no-observed-adverse-effect levels (NOAELs) or lowest-observed-adverse-effect levels (LOAELs) based upon the presence or absence of sedation at each time-point, species, and sex in the two year study. Distributions of the NOAEL and LOAEL values expressed in terms of internal dose were characterized using an arithmetic mean and standard deviation, with the mean internal NOAEL serving as the basis for the reference values, which was then divided by appropriate uncertainty factors. Where data were permitting, chemical-specific adjustment factors were derived to replace default uncertainty factor values of ten. Nonlinear kinetics are were predicted by the model in all species at PGME concentrations exceeding 100 ppm, which complicates interspecies and low-dose extrapolations. To address this complication, reference values were derived using two approaches which differ with respect to the order in which these extrapolations were performed: (1) uncertainty factor application followed by interspecies extrapolation (PBPK modeling); and (2) interspecies extrapolation followed by uncertainty factor application. The resulting reference values for these two approaches are substantially different, with values from the former approach being 7-fold higher than those from the latter approach. Such a striking difference between the two approaches reveals an underlying issue that has received little attention in the literature regarding the application of uncertainty factors and interspecies extrapolations to compounds where saturable kinetics occur in the range of the NOAEL. Until such discussions have taken place, reference values based on the latter approach are recommended for risk assessments involving human exposures to PGME and PGMEA.

  12. Value of Demand Response: Quantities from Production Cost Modeling (Presentation), NREL (National Renewable Energy Laboratory)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Value Study Desk Manual Value Study Desk Manual Updated September 26, 2012. PDF icon Memo from Robert Myers regarding DOE Benefit Value Desk Manual PDF icon Value Study Desk Manual More Documents & Publications Contractor Human Resources Management VALUE STUDY VALUE STUDY

    Value of Demand Response: Quantities from Production Cost Modeling Marissa Hummon PLMA Spring 2014 April 15-16, 2014 Denver, CO NREL/PR-6A20-61815 2 Background DOE-led, multiple national laboratory research project

  13. Electrorecycling of Critical and Value Metals from Mobile Electronics

    SciTech Connect (OSTI)

    Lister, Tedd E.; Wang, Peming; Anderko, Andre

    2014-09-01

    Mobile electronic devices such as smart phones and tablets are a significant source of valuable metals that should be recycled. Each year over a billion devices are sold world-wide and the average life is only a couple years. Value metals in phones are gold, palladium, silver, copper, cobalt and nickel. Devices now contain increasing amounts of rare earth elements (REE). In recent years the supply chain for REE has moved almost exclusively to China. They are contained in displays, speakers and vibrators within the devices. By US Department of Energy (DOE) classification, specific REEs (Nd, Dy, Eu, Tb and Y) are considered critical while others (Ce, La and Pr) are deemed near critical. Effective recycling schemes should include the recovery of these critical materials. By including more value materials in a recovery scheme, more value can be obtained by product diversification and less waste metals remains to be disposed of. REEs are mined as a group such that when specific elements become critical significantly more ore must be processed to capture the dilute but valuable critical elements. Targeted recycling of items containing the more of the less available critical materials could address their future criticality. This presentation will describe work in developing aqueous electrochemistry-based schemes for recycling metals from scrap mobile electronics. The electrorecycling process generates oxidizing agents at an anode while reducing dissolved metals at the cathode. E vs pH diagrams and metals dissolution experiments are used to assess effectiveness of various solution chemistries. Although several schemes were envisioned, a two stages process has been the focus of work: 1) initial dissolution of Cu, Sn, Ag and magnet materials using Fe+3 generated in acidic sulfate and 2) final dissolution of Pd and Au using Cl2 generated in an HCl solution. Experiments were performed using simulated metal mixtures. Both Cu and Ag were recovered at ~ 97% using Fe+3 while leaving Au and Ag intact. REE were extracted from the dissolved mixture using conventional methods. A discussion of future research directions will be discussed.

  14. Analysis of Solar Census Remote Solar Access Value Calculation Methodology

    SciTech Connect (OSTI)

    Nangle, J.; Dean, J.; Van Geet, O.

    2015-03-01

    The costs of photovoltaic (PV) system hardware (PV panels, inverters, racking, etc.) have fallen dramatically over the past few years. Nonhardware (soft) costs, however, have failed to keep pace with the decrease in hardware costs, and soft costs have become a major driver of U.S. PV system prices. Upfront or 'sunken' customer acquisition costs make up a portion of an installation's soft costs and can be addressed through software solutions that aim to streamline sales and system design aspects of customer acquisition. One of the key soft costs associated with sales and system design is collecting information on solar access for a particular site. Solar access, reported in solar access values (SAVs), is a measurement of the available clear sky over a site and is used to characterize the impacts of local shading objects. Historically, onsite shading studies have been required to characterize the SAV of the proposed array and determine the potential energy production of a photovoltaic system.

  15. Defining and Computing a Valued Based Cyber Security Measure

    SciTech Connect (OSTI)

    Aissa, Anis Ben; Abercrombie, Robert K; Sheldon, Frederick T; Mili, Ali

    2011-01-01

    In earlier works (Ben-Aissa et al. 2010; Abercrombie et al. 2008; Sheldon et al. 2009), we presented a value based measure of cybersecurity that quantifies the security of a system in concrete terms, specifically, in terms of how much each system stakeholder stands to lose (in dollars per hour of operation) as a result of security threats and system vulnerabilities; our metric varies according to the stakes that each stakeholder has in meeting each security requirement. In this paper, we discuss the specification and design of a system that collects, updates, and maintains all the information that pertains to estimating our cybersecurity measure, and offers stakeholders quantitative means to make security-related decisions.

  16. Value of Demand Response: Quantities from Production Cost Modeling (Presentation)

    SciTech Connect (OSTI)

    Hummon, M.

    2014-04-01

    Demand response (DR) resources present a potentially important source of grid flexibility particularly on future systems with high penetrations of variable wind and solar power generation. However, managed loads in grid models are limited by data availability and modeling complexity. This presentation focuses on the value of co-optimized DR resources to provide energy and ancillary services in a production cost model. There are significant variations in the availabilities of different types of DR resources, which affect both the operational savings as well as the revenue for each DR resource. The results presented include the system-wide avoided fuel and generator start-up costs as well as the composite revenue for each DR resource by energy and operating reserves. In addition, the revenue is characterized by the capacity, energy, and units of DR enabled.

  17. Value Engineering Study for Closing Waste Packages Containing TAD Canisters

    SciTech Connect (OSTI)

    Colleen Shelton-Davis

    2005-11-01

    The Office of Civilian Radioactive Waste Management announced their intention to have the commercial utilities package spent nuclear fuel in shielded, transportable, ageable, and disposable containers prior to shipment to the Yucca Mountain repository. This will change the conditions used as a basis for the design of the waste package closure system. The environment is now expected to be a low radiation, low contamination area. A value engineering study was completed to evaluate possible modifications to the existing closure system using the revised requirements. Four alternatives were identified and evaluated against a set of weighted criteria. The alternatives are (1) a radiation-hardened, remote automated system (the current baseline design); (2) a nonradiation-hardened, remote automated system (with personnel intervention if necessary); (3) a nonradiation-hardened, semi-automated system with personnel access for routine manual operations; and (4) a nonradiation-hardened, fully manual system with full-time personnel access. Based on the study, the recommended design is Alternative 2, a nonradiation-hardened, remote automated system. It is less expensive and less complex than the current baseline system, because nonradiation-hardened equipment can be used and some contamination control equipment is no longer needed. In addition, the inclusion of remote automation ensures throughput requirements are met, provides a more reliable process, and provides greater protection for employees from industrial accidents and radiation exposure than the semi-automated or manual systems. Other items addressed during the value engineering study as requested by OCRWM include a comparison to industry canister closure systems and corresponding lessons learned; consideration of closing a transportable, ageable, and disposable canister; and an estimate of the time required to perform a demonstration of the recommended closure system.

  18. CESP Tool 0.2: Value Brief Presentation | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    0.2: Value Brief Presentation CESP Tool 0.2: Value Brief Presentation CESP Tool 0.2: Value Brief Presentation from the Introduction to Community Energy Strategic Planning. File CESP Tool 0.2: Value Brief Presentation More Documents & Publications Guide to Community Energy Strategic Planning: Introduction Guide to Community Energy Strategic Planning Tool 0.2: Value Brief Elevator Speech

  19. Mirant: Ambient 24 Hour SO2 Values: Model vs Monitor | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ambient 24 Hour SO2 Values: Model vs Monitor Mirant: Ambient 24 Hour SO2 Values: Model vs Monitor Docket No. EO-05-01: Mirant: Ambient 24 Hour SO2 Values: Model vs Monitor, March ...

  20. No-Impact Threshold Values for NRAP's Reduced Order Models

    SciTech Connect (OSTI)

    Last, George V.; Murray, Christopher J.; Brown, Christopher F.; Jordan, Preston D.; Sharma, Maneesh

    2013-02-01

    The purpose of this study was to develop methodologies for establishing baseline datasets and statistical protocols for determining statistically significant changes between background concentrations and predicted concentrations that would be used to represent a contamination plume in the Gen II models being developed by NRAP’s Groundwater Protection team. The initial effort examined selected portions of two aquifer systems; the urban shallow-unconfined aquifer system of the Edwards-Trinity Aquifer System (being used to develop the ROM for carbon-rock aquifers, and the a portion of the High Plains Aquifer (an unconsolidated and semi-consolidated sand and gravel aquifer, being used to development the ROM for sandstone aquifers). Threshold values were determined for Cd, Pb, As, pH, and TDS that could be used to identify contamination due to predicted impacts from carbon sequestration storage reservoirs, based on recommendations found in the EPA’s ''Unified Guidance for Statistical Analysis of Groundwater Monitoring Data at RCRA Facilities'' (US Environmental Protection Agency 2009). Results from this effort can be used to inform a ''no change'' scenario with respect to groundwater impacts, rather than the use of an MCL that could be significantly higher than existing concentrations in the aquifer.

  1. M-flation: inflation from matrix valued scalar fields

    SciTech Connect (OSTI)

    Ashoorioon, Amjad; Firouzjahi, Hassan; Sheikh-Jabbari, M.M. E-mail: firouz@physics.mcgill.ca

    2009-06-01

    We propose an inflationary scenario, M-flation, in which inflation is driven by three N N hermitian matrices ?{sub i}, i = 1, 2, 3. The inflation potential of our model, which is strongly motivated from string theory, is constructed from ?{sub i} and their commutators. We show that one can consistently restrict the classical dynamics to a sector in which the ?{sub i} are proportional to the N N irreducible representations of SU(2). In this sector our model effectively behaves as an N-flation model with 3N{sup 2} number of fields and the effective inflaton field has a super-Planckian field value. Furthermore, the fine-tunings associated with unnaturally small couplings in the chaotic type inflationary scenarios are removed. Due to the matrix nature of the inflaton fields there are 3N{sup 2}?1 extra scalar fields in the dynamics. These have the observational effects such as production of iso-curvature perturbations on cosmic microwave background. Moreover, the existence of these extra scalars provides us with a natural preheating mechanism and exit from inflation. As the effective inflaton field can traverse super-Planckian distances in the field space, the model is capable of producing a considerable amount of gravity waves that can be probed by future CMB polarization experiments such as PLANCK, QUIET and CMBPOL.

  2. SEPARATION OF BARIUM VALUES FROM URANYL NITRATE SOLUTIONS

    DOE Patents [OSTI]

    Tompkins, E.R.

    1959-02-24

    The separation of radioactive barium values from a uranyl nitrate solution of neutron-irradiated uranium is described. The 10 to 20% uranyl nitrate solution is passed through a flrst column of a cation exchange resin under conditions favoring the adsorption of barium and certain other cations. The loaded resin is first washed with dilute sulfuric acid to remove a portion of the other cations, and then wash with a citric acid solution at pH of 5 to 7 to recover the barium along with a lesser amount of the other cations. The PH of the resulting eluate is adjusted to about 2.3 to 3.5 and diluted prior to passing through a smaller second column of exchange resin. The loaded resin is first washed with a citric acid solution at a pH of 3 to elute undesired cations and then with citric acid solution at a pH of 6 to eluts the barium, which is substantially free of undesired cations.

  3. ANION EXCHANGE METHOD FOR SEPARATION OF METAL VALUES

    DOE Patents [OSTI]

    Hyde, E.K.; Raby, B.A.

    1959-02-10

    A method is described for selectively separating radium, bismuth, poloniums and lead values from a metallic mixture of thc same. The mixture is dissolved in aqueous hydrochloric acid and the acidity is adjusted to between 1 to 2M in hydrochloric acid to form the anionic polychloro complexes of polonium and bismuth. The solution is contacted with a first anion exchange resin such as strong base quaternary ammonia type to selectively absorb the polonium and bismuth leaving the radium and lead in the effluent. The effluent, after treatment in hydrochloric acid to increase the hydrochloric acid concentration to 6M is contacted with a second anion exchange iesin of the same type as the above to selectively adsorb the lead leaving the radium in the effluent. Radium is separately recovered from the effluent from the second exchange column. Lead is stripped from the loaded resin of the second column by treatment with 3M hydrochloric acid solution. The loaded resin of the first column is washed with 8M hydrochloric acid solution to recover bismuth and then treated with strong nitric acid solution to recover polonium.

  4. ARM Evaluation Product : Droplet Number Concentration Value-Added Product

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Riihimaki, Laura

    2014-05-15

    Cloud droplet number concentration is an important factor in understanding aerosol-cloud interactions. As aerosol concentration increases, it is expected that droplet number concentration, Nd, will increase and droplet size decrease, for a given liquid water path (Twomey 1977), which will greatly affect cloud albedo as smaller droplets reflect more shortwave radiation. However, the magnitude and variability of these processes under different environmental conditions is still uncertain. McComiskey et al. (2009) have implemented a method, based on Boers and Mitchell (1994), for calculating Nd from ground-based remote sensing measurements of optical depth and liquid water path. They show that the magnitude of the aerosol-cloud interactions (ACI) varies with a range of factors, including the relative value of the cloud liquid water path (LWP), the aerosol size distribution, and the cloud updraft velocity. Estimates of Nd under a range of cloud types and conditions and at a variety of sites are needed to further quantify the impacts of aerosol cloud interactions.

  5. Precision absolute value amplifier for a precision voltmeter

    DOE Patents [OSTI]

    Hearn, William E.; Rondeau, Donald J.

    1985-01-01

    Bipolar inputs are afforded by the plus inputs of first and second differential input amplifiers. A first gain determining resister is connected between the minus inputs of the differential amplifiers. First and second diodes are connected between the respective minus inputs and the respective outputs of the differential amplifiers. First and second FETs have their gates connected to the outputs of the amplifiers, while their respective source and drain circuits are connected between the respective minus inputs and an output lead extending to a load resister. The output current through the load resister is proportional to the absolute value of the input voltage difference between the bipolar input terminals. A third differential amplifier has its plus input terminal connected to the load resister. A second gain determining resister is connected between the minus input of the third differential amplifier and a voltage source. A third FET has its gate connected to the output of the third amplifier. The source and drain circuit of the third transistor is connected between the minus input of the third amplifier and a voltage-frequency converter, constituting an output device. A polarity detector is also provided, comprising a pair of transistors having their inputs connected to the outputs of the first and second differential amplifiers. The outputs of the polarity detector are connected to gates which switch the output of the voltage-frequency converter between up and down counting outputs.

  6. Precision absolute-value amplifier for a precision voltmeter

    DOE Patents [OSTI]

    Hearn, W.E.; Rondeau, D.J.

    1982-10-19

    Bipolar inputs are afforded by the plus inputs of first and second differential input amplifiers. A first gain determining resistor is connected between the minus inputs of the differential amplifiers. First and second diodes are connected between the respective minus inputs and the respective outputs of the differential amplifiers. First and second FETs have their gates connected to the outputs of the amplifiers, while their respective source and drain circuits are connected between the respective minus inputs and an output lead extending to a load resistor. The output current through the load resistor is proportional to the absolute value of the input voltage difference between the bipolar input terminals. A third differential amplifier has its plus input terminal connected to the load resistor. A second gain determining resistor is connected between the minus input of the third differential amplifier and a voltage source. A third FET has its gate connected to the output of the third amplifier. The source and drain circuit of the third transistor is connected between the minus input of the third amplifier and a voltage-frequency converter, constituting an output device. A polarity detector is also provided, comprising a pair of transistors having their inputs connected to the outputs of the first and second differential amplifiers. The outputs of the polarity detector are connected to gates which switch the output of the voltage-frequency converter between up and down counting outputs.

  7. Electronically Nonadiabatic Dynamics via Semiclassical Initial Value Methods

    SciTech Connect (OSTI)

    Miller, William H.

    2008-12-11

    In the late 1970's Meyer and Miller (MM) [J. Chem. Phys. 70, 3214 (1979)] presented a classical Hamiltonian corresponding to a finite set of electronic states of a molecular system (i.e., the various potential energy surfaces and their couplings), so that classical trajectory simulations could be carried out treating the nuclear and electronic degrees of freedom (DOF) in an equivalent dynamical framework (i.e., by classical mechanics), thereby describing non-adiabatic dynamics in a more unified manner. Much later Stock and Thoss (ST) [Phys. Rev. Lett. 78, 578 (1997)] showed that the MM model is actually not a 'model', but rather a 'representation' of the nuclear-electronic system; i.e., were the MMST nuclear-electronic Hamiltonian taken as a Hamiltonian operator and used in the Schroedinger equation, the exact (quantum) nuclear-electronic dynamics would be obtained. In recent years various initial value representations (IVRs) of semiclassical (SC) theory have been used with the MMST Hamiltonian to describe electronically non-adiabatic processes. Of special interest is the fact that though the classical trajectories generated by the MMST Hamiltonian (and which are the 'input' for an SC-IVR treatment) are 'Ehrenfest trajectories', when they are used within the SC-IVR framework the nuclear motion emerges from regions of non-adiabaticity on one potential energy surface (PES) or another, and not on an average PES as in the traditional Ehrenfest model. Examples are presented to illustrate and (hopefully) illuminate this behavior.

  8. Hidden values in bauxite residue (red mud): Recovery of metals

    SciTech Connect (OSTI)

    Liu, Yanju; Naidu, Ravi

    2014-12-15

    Highlights: Current iron recovery techniques using red mud are depicted. Advantages and disadvantages exist in different recovering processes. Economic and environmental friendly integrated usage of red mud is promising. - Abstract: Bauxite residue (red mud) is a hazardous waste generated from alumina refining industries. Unless managed properly, red mud poses significant risks to the local environment due to its extreme alkalinity and its potential impacts on surface and ground water quality. The ever-increasing generation of red mud poses significant challenges to the aluminium industries from management perspectives given the low proportion that are currently being utilized beneficially. Red mud, in most cases, contains elevated concentrations of iron in addition to aluminium, titanium, sodium and valuable rare earth elements. Given the scarcity of iron supply globally, the iron content of red mud has attracted increasing research interest. This paper presents a critical overview of the current techniques employed for iron recovery from red mud. Information on the recovery of other valuable metals is also reviewed to provide an insight into the full potential usage of red mud as an economic resource rather than a waste. Traditional hydrometallurgy and pyrometallurgy are being investigated continuously. However, in this review several new techniques are introduced that consider the process of iron recovery from red mud. An integrated process which can achieve multiple additional values from red mud is much preferred over the single process methods. The information provided here should help to improve the future management and utilization of red mud.

  9. ARM Evaluation Product : Droplet Number Concentration Value-Added Product

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Riihimaki, Laura

    Cloud droplet number concentration is an important factor in understanding aerosol-cloud interactions. As aerosol concentration increases, it is expected that droplet number concentration, Nd, will increase and droplet size decrease, for a given liquid water path (Twomey 1977), which will greatly affect cloud albedo as smaller droplets reflect more shortwave radiation. However, the magnitude and variability of these processes under different environmental conditions is still uncertain. McComiskey et al. (2009) have implemented a method, based on Boers and Mitchell (1994), for calculating Nd from ground-based remote sensing measurements of optical depth and liquid water path. They show that the magnitude of the aerosol-cloud interactions (ACI) varies with a range of factors, including the relative value of the cloud liquid water path (LWP), the aerosol size distribution, and the cloud updraft velocity. Estimates of Nd under a range of cloud types and conditions and at a variety of sites are needed to further quantify the impacts of aerosol cloud interactions.

  10. Extended Community: An Oral History of the Community Environmental Monitoring Program (CEMP), 1989 - 2003

    SciTech Connect (OSTI)

    Susan DeSilva

    2004-07-01

    Studying the Community Environmental Monitoring Program (CEMP) provides a unique opportunity to trace a concept created by two nuclear industry originators from inception, as it transitioned through several stewardship agencies, to management by a non-profit organization. This transition is informed not only by changes over two decades in the views of the general populace toward nuclear testing but also by changing political climates and public policies. Several parallel histories accompanied the development of the CEMP: an administrative history, an environmental history, and a history of changing public perception of not only nuclear testing, but other activities involving radiation such as waste transportation, as well. Although vital, those histories will be provided only as background to the subject of this study, the oral histories gathered in this project. The oral histories collected open a window into the nuclear testing history of Nevada and Utah that has not heretofore been opened. The nuclear industry has generated a great deal of positive and negative reaction since its inception. The CEMP emerged with specific objectives. It was designed to provide information to potential downwind communities and counter negative perceptions by creating more community involvement and education about the testing. The current objectives of the program are to: (1) Manage and maintain the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) offsite monitoring program including 26 radiation and environmental monitoring stations with associated equipment. Provide air sample collection and analysis, radiological and meteorological data collection, interpretation and reporting. (2) Facilitate independent operation of radiological monitoring stations and data verification by private citizens living in communities in proximity to the Nevada Test Site (NTS). (3) Hire and initiate training of local citizens to serve as Community Environmental Monitors (CEMs) in designated communities. (4) Provide relevant training by qualified instructors to the CEMs as necessary. (5) Assist and manage CEMs in accomplishing their duties, and ensure that contracts and paychecks are issued on schedule. (6) Provide CEMs and Emeriti monthly materials to facilitate public awareness. This project explores how those objectives evolved over time with changes in the nuclear testing program. How similar are today's objectives to those originally established for the program? Do those objectives reflect a changing political landscape as well as changes in testing needs? Those questions and more will be addressed as we follow the program from its inception, through earlier versions administered first by the Public Health Service (PHS), then by the U.S. Environmental Protection Agency (EPA) to the current administrator, the Desert Research Institute (DRI).

  11. Treatment of Oral Cavity Squamous Cell Carcinoma With Adjuvant or Definitive Intensity-Modulated Radiation Therapy

    SciTech Connect (OSTI)

    Sher, David J.; Thotakura, Vijaya; Balboni, Tracy A.; Norris, Charles M.; Haddad, Robert I.; Posner, Marshall R.; Lorch, Jochen; Goguen, Laura A.; Annino, Donald J.; Tishler, Roy B.

    2011-11-15

    Purpose: The optimal management of oral cavity squamous cell carcinoma (OCSCC) typically involves surgical resection followed by adjuvant radiotherapy or chemoradiotherapy (CRT) in the setting of adverse pathologic features. Intensity-modulated radiation therapy (IMRT) is frequently used to treat oral cavity cancers, but published IMRT outcomes specific to this disease site are sparse. We report the Dana-Farber Cancer Institute experience with IMRT-based treatment for OCSCC. Methods and Materials: Retrospective study of all patients treated at Dana-Farber Cancer Institute for OCSCC with adjuvant or definitive IMRT between August 2004 and December 2009. The American Joint Committee on Cancer disease stage criteria distribution of this cohort included 5 patients (12%) with stage I; 10 patients (24%) with stage II (n = 10, 24%),; 14 patients (33%) with stage III (n = 14, 33%),; and 13 patients (31%) with stage IV. The primary endpoint was overall survival (OS); secondary endpoints were locoregional control (LRC) and acute and chronic toxicity. Results: Forty-two patients with OCSCC were included, 30 of whom were initially treated with surgical resection. Twenty-three (77%) of 30 surgical patients treated with adjuvant IMRT also received concurrent chemotherapy, and 9 of 12 (75%) patients treated definitively without surgery were treated with CRT or induction chemotherapy and CRT. With a median follow-up of 2.1 years (interquartile range, 1.1-3.1 years) for all patients, the 2-year actuarial rates of OS and LRC following adjuvant IMRT were 85% and 91%, respectively, and the comparable results for definitive IMRT were 63% and 64% for OS and LRC, respectively. Only 1 patient developed symptomatic osteoradionecrosis, and among patients without evidence of disease, 35% experienced grade 2 to 3 late dysphagia, with only 1 patient who was continuously gastrostomy-dependent. Conclusions: In this single-institution series, postoperative IMRT was associated with promising LRC, OS, and lower late toxicity rates, and chemoradiotherapy was a successful treatment for patients with high-risk disease. In contrast, outcomes of radiation-based treatment for patients with inoperable locally advanced disease were markedly less successful.

  12. Benefit Value Studies and Benefit Trends 11-3-15 Final.pptx

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | MTG DATE | 2015 Introduction to BIv1 2 Agenda What is a Benefit Value Study? Benefit Value Study ... as well as other work-life programs and perks ...

  13. "Economic","per Employee","of Value Added","of Shipments" "Characteris...

    U.S. Energy Information Administration (EIA) Indexed Site

    ,,,"Consumption" ,,"Consumption","per Dollar" ,"Consumption","per Dollar","of Value" "Economic","per Employee","of Value Added","of Shipments" "Characteristic(a)","(million ...

  14. "Economic","per Employee","of Value Added","of Shipments" "Characteris...

    U.S. Energy Information Administration (EIA) Indexed Site

    " ",,"Consumption","per Dollar" " ","Consumption","per Dollar","of Value" "Economic","per Employee","of Value Added","of Shipments" "Characteristic(a)","(million ...

  15. 48pt0ValueEngineeringinMOContracts.pdf | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    8pt0ValueEngineeringinMOContracts.pdf More Documents & Publications Chapter 48 - Value Engineering CX-008874: Categorical Exclusion Determination CX-000908: Categorical Exclusion...

  16. Top Value-Added Chemicals from Biomass - Volume II„Results of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Value-Added Chemicals from Biomass - Volume IIResults of Screening for Potential Candidates from Biorefinery Lignin Top Value-Added Chemicals from Biomass - Volume IIResults of ...

  17. Prospective Evaluation to Establish a Dose Response for Clinical Oral Mucositis in Patients Undergoing Head-and-Neck Conformal Radiotherapy

    SciTech Connect (OSTI)

    Narayan, Samir Lehmann, Joerg; Coleman, Matthew A.; Vaughan, Andrew; Yang, Claus Chunli; Enepekides, Danny; Farwell, Gregory; Purdy, James A.; Laredo, Grace; Nolan, Kerry A.S.; Pearson, Francesca S.; Vijayakumar, Srinivasan

    2008-11-01

    Purpose: We conducted a clinical study to correlate oral cavity dose with clinical mucositis, perform in vivo dosimetry, and determine the feasibility of obtaining buccal mucosal cell samples in patients undergoing head-and-neck radiation therapy. The main objective is to establish a quantitative dose response for clinical oral mucositis. Methods and Materials: Twelve patients undergoing radiation therapy for head-and-neck cancer were prospectively studied. Four points were chosen in separate quadrants of the oral cavity. Calculated dose distributions were generated by using AcQPlan and Eclipse treatment planning systems. MOSFET dosimeters were used to measure dose at each sampled point. Each patient underwent buccal sampling for future RNA analysis before and after the first radiation treatment at the four selected points. Clinical and functional mucositis were assessed weekly according to National Cancer Institute Common Toxicity Criteria, Version 3. Results: Maximum and average doses for sampled sites ranged from 7.4-62.3 and 3.0-54.3 Gy, respectively. A cumulative point dose of 39.1 Gy resulted in mucositis for 3 weeks or longer. Mild severity (Grade {<=} 1) and short duration ({<=}1 week) of mucositis were found at cumulative point doses less than 32 Gy. Polymerase chain reaction consistently was able to detect basal levels of two known radiation responsive genes. Conclusions: In our sample, cumulative doses to the oral cavity of less than 32 Gy were associated with minimal acute mucositis. A dose greater than 39 Gy was associated with longer duration of mucositis. Our technique for sampling buccal mucosa yielded sufficient cells for RNA analysis using polymerase chain reaction.

  18. Identifying Low pH Active and Lactate-Utilizing Taxa within Oral Microbiome Communities from Healthy Children Using Stable Isotope Probing Techniques

    SciTech Connect (OSTI)

    McLean, Jeffrey S.; Fansler, Sarah J.; Majors, Paul D.; Mcateer, Kathleen; Allen, Lisa Z.; Shirtliff, Mark E.; Lux, Renate; Shi, Wenyuan

    2012-03-05

    Many human microbial infectious diseases including dental caries are polymicrobial in nature and how these complex multi-species communities evolve from a healthy to a diseased state is not well understood. Although many health- or disease-associated oral microbes have been characterized in vitro, their physiology in vivo in the presence of the complex oral microbiome is difficult to determine with current approaches. In addition, about half of these oral species remain uncultivated to date and little is known except their 16S rRNA sequence. Lacking culture-based physiological analyses, the functional roles of uncultivated microorganisms will remain enigmatic despite their apparent disease correlation. To start addressing these knowledge gaps, we applied a novel combination of in vivo Magnetic Resonance Spectroscopy (MRS) with RNA and DNA based Stable Isotope Probing (SIP) to oral plaque communities from healthy children for temporal monitoring of carbohydrate utilization, organic acid production and identification of metabolically active and inactive bacterial species.

  19. Tool 0.2: Value Brief Elevator Speech | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2: Value Brief Elevator Speech Tool 0.2: Value Brief Elevator Speech Tool 0.2: Value Brief Elevator Speech from the Introduction to Community Energy Strategic Planning. File Tool 0.2: Value Brief Elevator Speech More Documents & Publications Guide to Community Energy Strategic Planning: Introduction CESP Tool 2.2: Stakeholder Invite

  20. Valuing Energy Efficiency: Considering Energy Performance in Real Estate Appraisals and Valuation

    Broader source: Energy.gov [DOE]

    Presenters: John Scott, Colliers International; Devesh Nirmul, Inspyrod; Theddi Wright Chappell, Sustainable Values

  1. Method for recovering palladium and technetium values from nuclear fuel reprocessing waste solutions

    DOE Patents [OSTI]

    Horwitz, E. Philip; Delphin, Walter H.

    1979-07-24

    A method for recovering palladium and technetium values from nuclear fuel reprocessing waste solutions containing these and other values by contacting the waste solution with an extractant of tricaprylmethylammonium nitrate in an inert hydrocarbon diluent which extracts the palladium and technetium values from the waste solution. The palladium and technetium values are recovered from the extractant and from any other coextracted values with a strong nitric acid strip solution.

  2. Performance and value of CAD-deficient pine- Final Report

    SciTech Connect (OSTI)

    Bailian Li; Houmin Chang; Hasan Jameel

    2007-02-28

    The southern US produces 58% of the nation's timber, much of it grown in intensively managed plantations of genetically improved loblolly pine. One of the fastest-growing loblolly pine selections made by the NCSU-Industry Cooperative Tree Improvement Program, whose progeny are widely planted, is also the only known natural carrier of a rare gene, cadn1. This allele codes for deficiency in an enzyme, cinnamyl alcohol dehydrogenase, which catalyzes the last step in the biosynthesis of lignin precursors. This study is to characterize this candidate gene for marker-assisted selection and deployment in the breeding program. This research will enhance the sustainability of forest production in the South, where land-use pressures will limit the total area available in the future for intensively managed plantations. Furthermore, this research will provide information to establish higher-value plantation forests with more desirable wood/fiber quality traits. A rare mutant allele (cad-n1) of the cad gene in loblolly pine (Pinus taeda L.) causes a deficiency in the production of cinnamyl alcohol dehydrogenase (CAD). The effects of this allele were examined by comparing wood density and growth traits of cad-n1 heterozygous trees with those of wild-type trees in a 10-year-old open-pollinated family trial growing under two levels of fertilization in Scotland County, North Carolina. In all, 200 trees were sampled with 100 trees for each treatment. Wood density measurements were collected from wood cores at breast height using x-ray densitometry. We found that the substitution of cad-n1 for a wild-type allele (Cad) was associated with a significant effect on wood density. The cad-n1 heterozygotes had a significantly higher wood density (+2.6%) compared to wild-type trees. The higher density was apparently due to the higher percentage of latewood in the heterozygotes. The fertilization effect was highly significant for both growth and wood density traits. While no cad genotype x treatment interactions was found for any of the traits studied, in the fertilized plots, the effect of the cad-n1 allele on wood density was reduced. The study indicates that the cad-n1 allele could be a valuable gene to the pulp and paper industry for the purpose of enhancing pulp yields through increasing wood density. Stem growth and wood density associated with a mutant null (cad-n1) allele were examined in three 15-year-old loblolly pine diallel tests, established on two sites in the southern United States. In each diallel test, one or two cad-n1 heterozygous parents were crossed with five unrelated wild-type parents, to produce five or ten full-sib families. In all, 839 trees from 20 full-sib families in four genetic backgrounds (a cad-n1 heterozygote x 5 unrelated trees) were sampled, genotyped at the cad locus, and assessed for growth and wood density traits. In a combined analysis of all four genetic backgrounds, we found evidence for effects of increased wood density associated with the cad-n1 allele at age 15 (p=0.03) years and height growth at ages 6 (p=0.03) and 15 (p=0.005). There were large differences in the cad-n1 effects for the various growth and wood traits among the diallel tests. This variation may be due to either different genetic backgrounds among the parents of the different diallel tests, or for different growing environments at the field sites. Even though the cad-n1 effect on growth and wood density was significant across genetic backgrounds, the effect was variable among full-sib families within backgrounds. We speculate that certain wild-type alleles from second parents specifically interact with cad-n1 producing large positive effects. In addition, pleiotropic effects on growth and wood density appear to be associated with the cad-n1 allele. While substantial gains are possible through deployment of trees carrying cad-n1, these gains may be family-specific and should be verified for each cross through field testing.

  3. Environment and energy in Iceland: A comparative analysis of values and impacts

    SciTech Connect (OSTI)

    Thorhallsdottir, Thora Ellen . E-mail: theth@hi.is

    2007-08-15

    Within an Icelandic framework plan for energy, environmental values and impacts were estimated in multicriteria analyses for 19 hydroelectric and 22 geothermal developments. Four natural environment classes were defined (geology + hydrology, species, ecosystems + soils, landscape + wilderness) with cultural heritage as the fifth class. Values and impacts were assessed through 6 agglomerated attributes: richness/diversity, rarity, size/continuity/pristineness, information/symbolic value, international responsibility and visual value. The project offers a unique opportunity for comparing environmental values and impacts within a large sample of sites and energy alternatives treated within a common methodological framework. Total values were higher in hydroelectric than in geothermal areas. Hydroelectric areas scored high for cultural heritage (particularly in rarity and information value), landscape and wilderness. Geothermal areas had high bedrock and hydrological diversity and information values, and a high landscape visual value but little cultural heritage. High values were correlated among some classes of the natural environment, all of which are likely to reflect functional relationships. In contrast, cultural heritage values were not related to natural environment values. Overall, landscape and wilderness had the highest mean value and were also most affected by energy development. Over 40% of the hydroelectric development had a predicted mean impact value of > 4 (out of a maximum of 10), compared with 10% of the geothermal projects. Excluding two outsized hydropower options, there was a significant correlation between plant capacity and impact on geology and hydrology but not with other environmental variables.

  4. Net PV Value by location and building type | Open Energy Information

    Open Energy Info (EERE)

    location and building type Jump to: navigation, search Impact of Utility Rates on PV Economics Solar value table: The following table shows the solar value (in kWh) found for...

  5. Market values summary/February market review/current market data

    SciTech Connect (OSTI)

    1995-03-01

    This article is the February 1995 uranium market summary. In the natural uranium and concentrates market, there were 10 deals, and the restricted value moved upward to $10.40. The unrestricted value remained fixed at $7.25. In the UF6 market, there were two deals in the restricted market, and the restricted value rose to $32.75 per kgU as UF6. The unrestricted value remained at $25.00. The restricted transaction value rose to $9.75, and the unrestricted value rose to $7.15. In the enrichment services market, there were three deals. The restricted SWU value rose to $90 per SWU, and the unrestricted value rose to $75 per SWU. Active uranium supply and active uranium demand dropped this reporting period.

  6. Market values summary/August market review/current market data

    SciTech Connect (OSTI)

    1994-09-01

    This article is the August 1994 uranium market summary. There were 16 deals in the natural uranium market. The restricted exchange value dropped slightly to $9.10 per pound U3O8, while the unrestricted exchange value remained steady at $7.10. Similarly, the restricted UF6 value eased to $29.30 kgU as UF6, and the unrestricted value remained constant at $24.50. The restricted transaction value declined slightly to $9.15 per pound U3O8, while the unrestricted value increased to $7.15. Both active supply and demand increased by a comparable amount. The unrestricted SWU value was unchanged, but the restricted value decreased by a dollar to $86 per SWU.

  7. METHOD FOR RECOVERING PLUTONIUM VALUES FROM SOLUTION USING A BISMUTH HYDROXIDE CARRIER PRECIPITATE

    DOE Patents [OSTI]

    Faris, B.F.

    1961-04-25

    Carrier precipitation processes for separating plutonium values from aqueous solutions are described. In accordance with the invention a bismuth hydroxide precipitate is formed in the plutonium-containing solution, thereby carrying plutonium values from the solution.

  8. Average and effective Q-values for fission product average (n...

    Office of Scientific and Technical Information (OSTI)

    Average and effective Q-values for fission product average (n,2n) and (n,3n) reaction cross sections Citation Details In-Document Search Title: Average and effective Q-values for ...

  9. The Capacity Value of Wind in the United States: Methods and Implementation

    SciTech Connect (OSTI)

    Milligan, Michael; Porter, Kevin

    2006-03-01

    As more wind energy capacity is added in the nation, the question of wind's capacity value is raised. This article shows how the capacity value of wind is determined, both in theory and in practice. (author)

  10. ADVANCED MANUFACTURING OFFICE HIGH VALUE ROLL TO ROLL (HV R2R...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ADVANCED MANUFACTURING OFFICE HIGH VALUE ROLL TO ROLL (HV R2R) WORKSHOP DECEMBER 2-3, 2015 ADVANCED MANUFACTURING OFFICE HIGH VALUE ROLL TO ROLL (HV R2R) WORKSHOP DECEMBER 2-3, ...

  11. Aerosol Optical Depth Value-Added Product for the SAS-He Instrument...

    Office of Scientific and Technical Information (OSTI)

    Aerosol Optical Depth Value-Added Product for the SAS-He Instrument Citation Details In-Document Search Title: Aerosol Optical Depth Value-Added Product for the SAS-He Instrument ...

  12. Building Value with Energy-Saving Upgrades in Homes and Businesses...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building Value with Energy-Saving Upgrades in Homes and Businesses Building Value with Energy-Saving Upgrades in Homes and Businesses July 12, 2011 - 10:09am Addthis Eric Barendsen...

  13. California Homebuyers Find More Value in Energy-Efficient Labeled Homes |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy California Homebuyers Find More Value in Energy-Efficient Labeled Homes California Homebuyers Find More Value in Energy-Efficient Labeled Homes A photo of a house. During a time when many homeowners have seen their homes' values decrease, some encouraging data shows how investing in efficiency will boost resale value. Aside from the increased comfort and reduced utility bills that stem from home energy efficiency upgrades, homeowners who invest in energy-efficient

  14. Design and synthesis of orally bioavailable serum and glucocorticoid-regulated kinase 1 (SGK1) inhibitors

    SciTech Connect (OSTI)

    Hammond, Marlys; Washburn, David G.; Hoang, Tram H.; Manns, Sharada; Frazee, James S.; Nakamura, Hiroko; Patterson, Jaclyn R.; Trizna, Walter; Wu, Charlene; Azzarano, Leonard M.; Nagilla, Rakesh; Nord, Melanie; Trejo, Rebecca; Head, Martha S.; Zhao, Baoguang; Smallwood, Angela M.; Hightower, Kendra; Laping, Nicholas J.; Schnackenberg, Christine G.; Thompson, Scott K.

    2010-09-27

    The lead serum and glucocorticoid-related kinase 1 (SGK1) inhibitors 4-(5-phenyl-1H-pyrrolo[2,3-b]pyridin-3-yl)benzoic acid (1) and {l_brace}4-[5-(2-naphthalenyl)-1H-pyrrolo[2,3-b]pyridin-3-yl]phenyl{r_brace}acetic acid (2) suffer from low DNAUC values in rat, due in part to formation and excretion of glucuronic acid conjugates. These PK/glucuronidation issues were addressed either by incorporating a substituent on the 3-phenyl ring ortho to the key carboxylate functionality of 1 or by substituting on the group in between the carboxylate and phenyl ring of 2. Three of these analogs have been identified as having good SGK1 inhibition potency and have DNAUC values suitable for in vivo testing.

  15. Development of adjustment factors for the EPA city and highway MPG values

    SciTech Connect (OSTI)

    Hellman, K.H.; Murrell, J.D.

    1984-01-01

    This paper describes the development of adjustment factors applicable to the EPA City and Highway MPG values. The paper discusses the data bases used, and the analytical methods employed to arrive at adjustment factors of 0.90 for the EPA City MPG value and 0.78 for the EPA Highway MPG value.

  16. Classification of subsurface objects using singular values derived from signal frames

    DOE Patents [OSTI]

    Chambers, David H; Paglieroni, David W

    2014-05-06

    The classification system represents a detected object with a feature vector derived from the return signals acquired by an array of N transceivers operating in multistatic mode. The classification system generates the feature vector by transforming the real-valued return signals into complex-valued spectra, using, for example, a Fast Fourier Transform. The classification system then generates a feature vector of singular values for each user-designated spectral sub-band by applying a singular value decomposition (SVD) to the N.times.N square complex-valued matrix formed from sub-band samples associated with all possible transmitter-receiver pairs. The resulting feature vector of singular values may be transformed into a feature vector of singular value likelihoods and then subjected to a multi-category linear or neural network classifier for object classification.

  17. Market values summary/December market review/current market data

    SciTech Connect (OSTI)

    1994-01-01

    This article is the December 1993 uranium market summary. During this period, there were six deals in the restricted concentrates market and none in the unrestricted market. The restricted value dropped slightly to $9.85 per pound U3O8, while the unrestricted market rose slightly to $7.00. The UF6 market was also slow, with a slight decrease in the restricted UF6 value to $31.00 and no change in the unrestricted value ($24.00). The unrestricted transaction value was $7.15 per pound U3O8, and the restricted value was $10.25. In the enrichment services market, the unrestricted SWU value remained fixed at $68.00 per SWU, while the unrestricted value increased by a dollar to $84.00 per SWU. Active uranium supply decreased, while active demand increased.

  18. VALUE $CENDIV

    U.S. Energy Information Administration (EIA) Indexed Site

    164 CLEQP. PKGCPS8 Packaged unit heat pump for cooling 166- 166 YESNO. SPLCPS8 Split system heat pump for cooling 168- 168 YESNO. RMCPS8 Individual room heat pump for cooling...

  19. Enhancement of cancer stem-like and epithelial?mesenchymal transdifferentiation property in oral epithelial cells with long-term nicotine exposure: Reversal by targeting SNAIL

    SciTech Connect (OSTI)

    Yu, Cheng-Chia; School of Dentistry, Chung Shan Medical University, Taichung, Taiwan; Department of Dentistry, Chung Shan Medical University Hospital, Taichung, Taiwan ; Chang, Yu-Chao; Department of Dentistry, Chung Shan Medical University Hospital, Taichung, Taiwan

    2013-02-01

    Cigarette smoking is one of the major risk factors in the development and further progression of tumorigenesis, including oral squamous cell carcinoma (OSCC). Recent studies suggest that interplay cancer stem-like cells (CSCs) and epithelial?mesenchymal transdifferentiation (EMT) properties are responsible for the tumor maintenance and metastasis in OSCC. The aim of the present study was to investigate the effects of long-term exposure with nicotine, a major component in cigarette, on CSCs and EMT characteristics. The possible reversal regulators were further explored in nicotine-induced CSCs and EMT properties in human oral epithelial (OE) cells. Long-term exposure with nicotine was demonstrated to up-regulate ALDH1 population in normal gingival and primary OSCC OE cells dose-dependently. Moreover, long-term nicotine treatment was found to enhance the self-renewal sphere-forming ability and stemness gene signatures expression and EMT regulators in OE cells. The migration/cell invasiveness/anchorage independent growth and in vivo tumor growth by nude mice xenotransplantation assay was enhanced in long-term nicotine-stimulated OE cells. Knockdown of Snail in long-term nicotine-treated OE cells was found to reduce their CSCs properties. Therapeutic delivery of Si-Snail significantly blocked the xenograft tumorigenesis of long-term nicotine-treated OSCC cells and largely significantly improved the recipient survival. The present study demonstrated that the enrichment of CSCs coupled EMT property in oral epithelial cells induced by nicotine is critical for the development of OSCC tumorigenesis. Targeting Snail might offer a new strategy for the treatment of OSCC patients with smoking habit. -- Highlights: ? Sustained nicotine treatment induced CSCs properties of oral epithelial cells. ? Long-term nicotine treatment enhance EMT properties of oral epithelial cells. ? Long-term nicotine exposure increased tumorigenicity of oral epithelial cells. ? Si-Snail blocked xenograft tumorigenesis of long-term nicotine-treated OSCC cells.

  20. Market values summary/April market review/current market data

    SciTech Connect (OSTI)

    1994-05-01

    This article is the April 1994 uranium market summary. The near-term market was slow, with three near-term deals for concentrates and none for UF6. This was reflected in the decline of the concentrates restricted value $9.30 per pound U3O8 and the UF6 restricted value to $29.75 per kgU as UF6. In each market, the unrestricted value remained unchanged at $7.00 and $24.50 due to the lack of trades in the unrestricted market. Transaction values in both the restricted and unrestricted market were constant at $9.45 and $7.05 per pound U3O8. The restricted SWU value rose a dollar to $88 per SWU, and the unrestricted SWU value remained steady at $67 per SWU. Active demand continued to decrease, while active supply increased.

  1. Market values summary/March market review/current market data

    SciTech Connect (OSTI)

    1994-04-01

    This article is the March 1993 uranium market summary. In the natural uranium and concentrates market, there were eight transactions. Both the restricted and unrestricted values were unchanged at $9.45 and $7.00 per pound of U3O8 respectively. In the UF6 market, there were three deals. Both restricted and unrestricted values were also unchanged at $30.00 and $24.50 per kgU as UF6 respectively. The restricted transaction value dropped slightly to $9.45, and the unrestricted value dropped to $7.05. In the enrichment services market, there were six deals reported, with the restricted SWU value rising to $87.00 and the unrestricted SWU value dropping to $67.00. Active uranium demand decreased considerably, while active supply increased.

  2. Methods and apparatus using commutative error detection values for fault isolation in multiple node computers

    DOE Patents [OSTI]

    Almasi, Gheorghe [Ardsley, NY; Blumrich, Matthias Augustin [Ridgefield, CT; Chen, Dong [Croton-On-Hudson, NY; Coteus, Paul [Yorktown, NY; Gara, Alan [Mount Kisco, NY; Giampapa, Mark E. [Irvington, NY; Heidelberger, Philip [Cortlandt Manor, NY; Hoenicke, Dirk I. [Ossining, NY; Singh, Sarabjeet [Mississauga, CA; Steinmacher-Burow, Burkhard D. [Wernau, DE; Takken, Todd [Brewster, NY; Vranas, Pavlos [Bedford Hills, NY

    2008-06-03

    Methods and apparatus perform fault isolation in multiple node computing systems using commutative error detection values for--example, checksums--to identify and to isolate faulty nodes. When information associated with a reproducible portion of a computer program is injected into a network by a node, a commutative error detection value is calculated. At intervals, node fault detection apparatus associated with the multiple node computer system retrieve commutative error detection values associated with the node and stores them in memory. When the computer program is executed again by the multiple node computer system, new commutative error detection values are created and stored in memory. The node fault detection apparatus identifies faulty nodes by comparing commutative error detection values associated with reproducible portions of the application program generated by a particular node from different runs of the application program. Differences in values indicate a possible faulty node.

  3. An Empirical Method for deriving RBE values associated with Electrons, Photons and Radionuclides

    SciTech Connect (OSTI)

    Bellamy, Michael B; Eckerman, Keith F; Hertel, Nolan

    2015-01-01

    There is substantial evidence to justify using relative biological effectiveness (RBE) values greater than one for low-energy electrons and photons. But, in the field of radiation protection, radiation associated with low linear energy transfer (LET) has been assigned a radiation weighting factor $w_R$ of one. This value may be suitable for radiation protection but, for risk considerations, it is important to evaluate the potential elevated biological effectiveness of radiation to improve the quality of risk estimates. RBE values between 2 and 3 for tritium are implied by several experimental measurements. Additionally, elevated RBE values have been found for other similar low-energy radiation sources. In this work, RBE values are derived for electrons based upon the fractional deposition of absorbed dose of energies less than a few keV. Using this empirical method, RBE values were also derived for monoenergetic photons and 1070 radionuclides from ICRP Publication 107 for which photons and electrons are the primary emissions.

  4. Store operation with conditional push of a tag value to a queue

    DOE Patents [OSTI]

    Heidelberger, Philip; Steinmacher-Burow, Burkhard

    2015-07-28

    According to one embodiment, a method for a store operation with a conditional push of a tag value to a queue is provided. The method includes configuring a queue that is accessible by an application, setting a value at an address in a memory device including a memory and a controller, receiving a request for an operation using the value at the address and performing the operation. The method also includes the controller writing a result of the operation to the address, thus changing the value at the address, the controller determining if the result of the operation meets a condition and the controller pushing a tag value to the queue based on the condition being met, where the tag value in the queue indicates to the application that the condition is met.

  5. Buildings Energy Data Book: 1.3 Value of Construction and Research

    Buildings Energy Data Book [EERE]

    1 Estimated Value of All U.S. Construction Relative to the GDP ($2010) - 2007 estimated value of all U.S. construction was $1.82 trillion (including renovation; heavy construction; public works; residential, commercial, and industrial new construction; and non-contract work). - Compared to the $14.6 trillion 2007 U.S. gross domestic product (GDP), all construction held a 12.4% share. - In 2007, residential and commercial building renovation (valued at $496 billion) and new building construction

  6. Reduction of the beam breakup mode Q values in the ETA/ATA Accelerating Cells

    SciTech Connect (OSTI)

    Birx, D.L.

    1980-05-20

    Earlier Microwave Measurements of the ETA Accelerating Cells has uncovered eleven resonances in the frequency range of 0 > 850 MHz. The Q values of these modes ranged from 14 to 70. A three phase program directed at substantially reducing these Q values is reported. In particular the dampening methods described below resulted in a decrease of Q value from 40 to 5 for the beam breakup mode (TM/sub 110/) with a corresponding reduction for most of the other cavity modes.

  7. Minimal sufficient positive-operator valued measure on a separable Hilbert

    Office of Scientific and Technical Information (OSTI)

    space (Journal Article) | SciTech Connect Minimal sufficient positive-operator valued measure on a separable Hilbert space Citation Details In-Document Search Title: Minimal sufficient positive-operator valued measure on a separable Hilbert space We introduce a concept of a minimal sufficient positive-operator valued measure (POVM), which is the least redundant POVM among the POVMs that have the equivalent information about the measured quantum system. Assuming the system Hilbert space to be

  8. Best Practices for Getting the Best Value from Federal Utility Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Service Contracts | Department of Energy Utility Energy Service Contracts » Best Practices for Getting the Best Value from Federal Utility Energy Service Contracts Best Practices for Getting the Best Value from Federal Utility Energy Service Contracts Federal agencies benefit from lessons learned during utility energy service contracts (UESCs). Over the years, best practices for getting the best value from UESCs have been identified from successful UESC projects. While each federal agency

  9. 2D Gridded Surface Data Value-Added Product (Technical Report) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect 2D Gridded Surface Data Value-Added Product Citation Details In-Document Search Title: 2D Gridded Surface Data Value-Added Product This report describes the Atmospheric Radiation Measurement (ARM) Best Estimate (ARMBE) 2-dimensional (2D) gridded surface data (ARMBE2DGRID) value-added product. Spatial variability is critically important to many scientific studies, especially those that involve processes of great spatial variations at high temporal frequency (e.g., precipitation,

  10. NREL: State and Local Governments - Value of Solar: Program Design and

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Implementation Considerations Value of Solar: Program Design and Implementation Considerations In the report, Value of Solar: Program Design and Implementation Considerations, policy analysts from NREL and the Solar Electric Power Association (SEPA) present the variety of value of solar (VOS) program design options and their implications within different solar market types. The study assesses the current cost competitiveness of residential solar projects in each U.S. state, under several

  11. ADVANCED MANUFACTURING OFFICE HIGH VALUE ROLL TO ROLL (HV R2R) WORKSHOP

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DECEMBER 2-3, 2015 | Department of Energy ADVANCED MANUFACTURING OFFICE HIGH VALUE ROLL TO ROLL (HV R2R) WORKSHOP DECEMBER 2-3, 2015 ADVANCED MANUFACTURING OFFICE HIGH VALUE ROLL TO ROLL (HV R2R) WORKSHOP DECEMBER 2-3, 2015 PDF icon Draft Agenda More Documents & Publications WORKSHOP: SUSTAINABILITY IN MANUFACTURING AGENDA AND OVERVIEW WORKSHOP: HIGH VALUE ROLL TO ROLL (HV R2R) MANUFACTURING INNOVATION, DECEMBER 2-3, 2015 2015 AMO Peer Review Agenda

  12. Biogas From Municipal WWTPs: Fuel Cells Viewed as a Value Proposition |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy From Municipal WWTPs: Fuel Cells Viewed as a Value Proposition Biogas From Municipal WWTPs: Fuel Cells Viewed as a Value Proposition Presentation about the value proposition for biogas from waste water treatment plants. Presented by Steve Hamilton, SCS Energy, at the NREL/DOE Biogas and Fuel Cells Workshop held June 11-13, 2012, in Golden, Colorado. PDF icon june2012_biogas_workshop_hamilton.pdf More Documents & Publications Biogas and Fuel Cells Workshop Summary

  13. On the use of Extreme Value Theory in analyses of continuum gamma decay

    SciTech Connect (OSTI)

    Garcia-Ruiz, R. F.; Cristancho, F.

    2010-08-04

    Extreme Value theory seems to be a promising tool for analysing experimental continuum gamma decay spectra in order to obtain physical parameters at high excitation energy.

  14. MWRRET Value-Added Product: The Retrieval of Liquid Water Path...

    Office of Scientific and Technical Information (OSTI)

    MWRRET Value-Added Product: The Retrieval of Liquid Water Path and Precipitable Water Vapor from Microwave Radiometer (MWR) Data Sets (Revision 2) Citation Details In-Document ...

  15. Level: National and Regional Data; Row: Values of Shipments and Employment Sizes;

    U.S. Energy Information Administration (EIA) Indexed Site

    2 Consumption Ratios of Fuel, 2010; Level: National and Regional Data; Row: Values of Shipments and Employment Sizes; Column: Energy-Consumption Ratios; Unit: Varies. Consumption Consumption per Dollar Consumption per Dollar of Value Economic per Employee of Value Added of Shipments Characteristic(a) (million Btu) (thousand Btu) (thousand Btu) Total United States Value of Shipments and Receipts (million dollars) Under 20 405.4 4.0 2.1 20-49 631.3 4.7 2.2 50-99 832.0 4.9 2.3 100-249 1,313.4 6.2

  16. Sales and Value Recognition for Zero Energy Ready Home Webinar (Text Version)

    Broader source: Energy.gov [DOE]

    Below is the text version of the webinar, Sales and Value Recognition for Zero Energy Ready Home, presented in December 2014. Watch the presentation.

  17. 2011 Nobel Laureate Saul Perlmutter on the Value of National Labs

    ScienceCinema (OSTI)

    Perlmutter, Saul

    2013-05-29

    2011 Nobel Laureate, Saul Perlmutter, discusses what makes Lawrence Berkeley National Lab unique, and the value of national labs in award-winning research.

  18. Market values summary/October market review/current market data

    SciTech Connect (OSTI)

    1993-11-01

    This article is the October 1993 uranium market summary. In spite of the substantial quantity of material that moved through the unrestricted market during this period, the unrestricted exchange value remained constant at $6.90 per pound U3O8, and the unrestricted value dipped to $10.15. There were four deals in the concentrates market during this period. Both the restricted and the unrestricted UF6 values remained constant at $31.75 and $24.75 per kgU as UF6 respectively, as did the restricted and unrestricted SWU values ($82 and $68 respectively). Active supply increased, while active demand decreased.

  19. EERE Success Story-Texas: City of San Antonio Demonstrates Value...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    San Antonio Demonstrates Value of Greater Investments in ... create jobs and stimulate economic development within the ... of 750,000. San Antonio added a measure of innovation by ...

  20. Have You Added Value to Your Home with Energy Saving Upgrades?

    Broader source: Energy.gov [DOE]

    Have you done any energy-efficient remodeling and seen your home increase in either value or appeal to potential buyers?

  1. Level: National and Regional Data; Row: Values of Shipments and Employment Sizes;

    U.S. Energy Information Administration (EIA) Indexed Site

    2 Consumption Ratios of Fuel, 2006; Level: National and Regional Data; Row: Values of Shipments and Employment Sizes; Column: Energy-Consumption Ratios; Unit: Varies. Consumption Consumption per Dollar Consumption per Dollar of Value Economic per Employee of Value Added of Shipments Characteristic(a) (million Btu) (thousand Btu) (thousand Btu) Total United States Value of Shipments and Receipts (million dollars) Under 20 330.6 3.6 2.0 20-49 550.0 4.5 2.2 50-99 830.1 5.9 2.7 100-249 1,130.0 6.7

  2. An assessment of the net value of CSP systems integrated with thermal energy storage

    SciTech Connect (OSTI)

    Mehos, M.; Jorgenson, J.; Denholm, P.; Turchi, C.

    2015-05-01

    Within this study, we evaluate the operational and capacity valueor total system valuefor multiple concentrating solar power (CSP) plant configurations under an assumed 33% renewable penetration scenario in California. We calculate the first-year bid price for two CSP plants, including a 2013 molten-salt tower integrated with a conventional Rankine cycle and a hypothetical 2020 molten-salt tower system integrated with an advanced supercritical carbon-dioxide power block. The overall benefit to the regional grid, defined in this study as the net value, is calculated by subtracting the first-year bid price from the total system value.

  3. Microsoft Word - 2015-08-21 Web Posting for Earned Value Management

    Office of Environmental Management (EM)

    CONTRACTOR EARNED VALUE MANAGEMENT SYSTEM CERTIFICATION STATUS (as of August 21, 2015) DOE Office (Geographic Site) Contract Name Contractor Name Principal Companies Certified...

  4. Doppler Lidar Wind Value-Added Product (Technical Report) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Wind Value-Added Product Citation Details In-Document Search Title: Doppler Lidar Wind ... Visit OSTI to utilize additional information resources in energy science and technology. A ...

  5. Sandia Energy - PV Value Tool Featured at Washington D.C. Roundtable

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    by the Federal Housing Administration-Single Family Housing Office of Economic Resilience and the Executive Office of the President on March 11, 2014. The PV Value tool,...

  6. 3-Cylinder Turbocharged Gasoline Direct Injection: A High Value Solution for Euro VI Emissions

    Broader source: Energy.gov [DOE]

    3-cylindery gasoline direct injection engines offer similar value in CO2 reduction capability (Euros/% CO2 reduction) at a significantly lower on-cost.

  7. Microsoft Word - 2015-09-25 Web Posting for Earned Value Management

    Office of Environmental Management (EM)

    CONTRACTOR EARNED VALUE MANAGEMENT SYSTEM CERTIFICATION STATUS (as of September 25, 2015) DOE Office (Geographic Site) Contract Name Contractor Name Principal Companies Certified...

  8. Investigating the Effect of Pyridine Vapor Treatment on Perovskite Solar Cells - Oral Presentation

    SciTech Connect (OSTI)

    Pike, Christopher

    2015-08-25

    The goal of this research is to determine procedures for creating ultra-high capacity supercapacitors by using nanofabrication techniques and high k-value dielectrics. One way to potentially solve the problem of climate change is to switch the source of energy to a source that doesn’t release many tons of greenhouse gases, gases which cause global warming, into the Earth’s atmosphere. These trap in more heat from the Sun’s solar energy and cause global temperatures to rise. Atomic layer deposition will be used to create a uniform thin-film of dielectric to greatly enhance the abilities of our capacitors and will build them on the nanoscale.

  9. Experimental study of thermal resistance values (R-values) of low-density mineral-fiber building insulation batts commercially available in 1977

    SciTech Connect (OSTI)

    Tye, R.P.; Desjarlais, A.O.; Yarbrough, D.W.; McElroy, D.L.

    1980-04-01

    This study was initiated in June 1977 to obtain and evaluate full-thickness thermal performance data on mineral fiber, i.e., fiberglass and rock wool, batt-type insulations. The study aimed to obtain full-thickness thermal performance data and to assess other properties of mineral fiber building insulations. The physical property measurements discussed in this report provide a measure of the range of values for density, thickness, and R-value based on a sampling of low-density mineral-fiber building insulation batts purchased in the marketplace in 1977. The experimental data were used to establish mean R-values at nominal (label) thickness of R-11 and R-19 fiberglass batts and R-11 rock wool batts. The full-thickness and sliced testing techniques provided a set of R-values on the purchased samples that were converted to R-values at label thickness by using a particular correlation of apparent thermal conductivity and density. The full thickness results indicate surprisingly large percentages below labeled R-value for these four types of mineral fiber insulation. A statistical analysis of these data based on the assumption of normally distributed properties is included. This yielded estimates of similar magnitude for the population from which the samples were purchased. An urgency for continued sampling and further testing of mineral fiber insulations by many laboratories was identified. The differences between results obtained with the sliced technique and results obtained with full-thickness testing must be thoroughly understood and documented so that adjustment factors for the thickness effect can be accurately established. (LCL)

  10. Non-contiguous finished genome sequence of the opportunistic oral pathogen Prevotella multisaccharivorax type strain (PPPA20T)

    SciTech Connect (OSTI)

    Pati, Amrita; Gronow, Sabine; Lu, Megan; Lapidus, Alla L.; Nolan, Matt; Lucas, Susan; Hammon, Nancy; Deshpande, Shweta; Cheng, Jan-Fang; Tapia, Roxanne; Han, Cliff; Goodwin, Lynne A.; Pitluck, Sam; Liolios, Konstantinos; Pagani, Ioanna; Mavromatis, K; Mikhailova, Natalia; Huntemann, Marcel; Chen, Amy; Palaniappan, Krishna; Land, Miriam L; Hauser, Loren John; Detter, J. Chris; Brambilla, Evelyne-Marie; Rohde, Manfred; Goker, Markus; Woyke, Tanja; Bristow, James; Eisen, Jonathan; Markowitz, Victor; Hugenholtz, Philip; Kyrpides, Nikos C; Klenk, Hans-Peter; Ivanova, N

    2011-01-01

    Prevotella multisaccharivorax Sakamoto et al. 2005 is a species of the large genus Prevotella, which belongs to the family Prevotellaceae. The species is of medical interest because its members are able to cause diseases in the human oral cavity such as periodontitis, root caries and others. Although 77 Prevotella genomes have already been sequenced or are targeted for sequencing, this is only the second completed genome sequence of a type strain of a species within the genus Prevotella to be published. The 3,388,644 bp long genome is assembled in three non-contiguous contigs, harbors 2,876 protein-coding and 75 RNA genes and is a part of the Genomic Encyclopedia of Bacteria and Archaea project.

  11. Insights into the role of components of the tumor microenvironment in oral carcinoma call for new therapeutic approaches

    SciTech Connect (OSTI)

    Salo, Tuula; Vered, Marilena; Bello, Ibrahim O.; Nyberg, Pia; Bitu, Carolina Cavalcante; Zlotogorski Hurvitz, Ayelet; Dayan, Dan

    2014-07-15

    The research on oral cancer has focused mainly on the cancer cells, their genetic changes and consequent phenotypic modifications. However, it is increasingly clear that the tumor microenvironment (TME) has been shown to be in a dynamic state of inter-relations with the cancer cells. The TME contains a variety of components including the non-cancerous cells (i.e., immune cells, resident fibroblasts and angiogenic vascular cells) and the ECM milieu [including fibers (mainly collagen and fibronectin) and soluble factors (i.e., enzymes, growth factors, cytokines and chemokines)]. Thus, it is currently assumed that TME is considered a part of the cancerous tissue and the functionality of its key components constitutes the setting on which the hallmarks of the cancer cells can evolve. Therefore, in terms of controlling a malignancy, one should control the growth, invasion and spread of the cancer cells through modifications in the TME components. This mini review focuses on the TME as a diagnostic approach and reports the recent insights into the role of different TME key components [such as carcinoma-associated fibroblasts (CAFs) and inflammation (CAI) cells, angiogenesis, stromal matrix molecules and proteases] in the molecular biology of oral carcinoma. Furthermore, the impact of TME components on clinical outcomes and the concomitant need for development of new therapeutic approaches will be discussed. - Highlights: Tumor depth and budding, hypoxia and TME cells associate with worse prognosis. Pro-tumoral CAFs and CAI cells aid proliferation, invasion and spread hypoxia. Some ECM-bound factors exert pro-angiogenic or pro-tumor activities. Tumor spread is greatly dependent on ECM proteolysis, mediated by TME cells. Direct targeting of TME components for treatment is still experimental.

  12. Market values summary/February market overview/current market data

    SciTech Connect (OSTI)

    1994-03-01

    This article is the February 1994 uranium market summary. During this reporting period, there were six deals in the natural uranium market involving 2.5 Mlb equivalent U3O8. The restricted exchange value eased to $9.45 per pound U3O8, and the unrestricted value remained unchanged at $7.00. There two deals for uranium as UF6, and the restricted UF6 value decreased to $30.00 per kgU as UF6. The unrestricted UF6 value was unchanged at $24.50. There were no long-term deals during this period, but several utilities were evaluating offers for over 10 Mlb equivalent U3O8 for delivery through 2005. The unrestricted transaction value remained steady at $7.15 per pound U3O8, while the restricted value dropped slightly to $9.75. The unrestricted SWU value was unchanged at $68 per SWU, but the restricted value once again increased by a dollar to $86. Active uranium supply decreased slightly, while active demand increased considerably.

  13. Market values summary/May market review/current market data

    SciTech Connect (OSTI)

    1994-06-01

    This article is the May 1994 uranium market survey. In the spot concentrates market, there was only one new deal, and as a result, the restricted exchange value eased to $9.25 per pound U3O8. The unrestricted exchange value remained constant at $7.00. There were two deals in the UF6 spot market, and the restricted UF6 value decreased to $29.40 per kgU as UF6. The unrestricted UF6 value was unchanged. There were two deals in the long-term marketplace. The restricted transaction value declined to $9.40 per pound U3O8, and the unrestricted transaction value remained fixed at $7.05. There were three deals in the enrichment services market, and the restricted SWU value dropped to $87 per SWU, while the unrestricted SWU value remained constant at $67. Active uranium supply decreased this reporting period, while active demand increased. Supply continued to overwhelm demand, however.

  14. SEPARATION OF URANYL AND RUTHENIUM VALUES BY THE TRIBUTYL PHOSPHATE EXTRACTION PROCESS

    DOE Patents [OSTI]

    Wilson, A.S.

    1961-05-01

    A process is given for separating uranyl values from ruthenium values contained in an aqueous 3 to 4 M nitric acid solution. After the addition of hydrogen peroxide to obtain a concentration of 0.3 M, the uranium is selectively extracted with kerosene-diluted tributyl phosphate.

  15. Precipitation process for the removal of technetium values from nuclear waste solutions

    DOE Patents [OSTI]

    Walker, D.D.; Ebra, M.A.

    1985-11-21

    High efficiency removal of techetium values from a nuclear waste stream is achieved by addition to the waste stream of a precipitant contributing tetraphenylphosphonium cation, such that a substantial portion of the technetium values are precipitated as an insoluble pertechnetate salt.

  16. ARM Climate Research Facility Spectral Surface Albedo Value-Added Product (VAP) Report

    SciTech Connect (OSTI)

    McFarlane, S; Gaustad, K; Long, C; Mlawer, E

    2011-07-15

    This document describes the input requirements, output data products, and methodology for the Spectral Surface Albedo (SURFSPECALB) value-added product (VAP). The SURFSPECALB VAP produces a best-estimate near-continuous high spectral resolution albedo data product using measurements from multifilter radiometers (MFRs). The VAP first identifies best estimates for the MFR downwelling and upwelling shortwave irradiance values, and then calculates narrowband spectral albedo from these best-estimate irradiance values. The methodology for finding the best-estimate values is based on a simple process of screening suspect data and backfilling screened and missing data with estimated values when possible. The resulting best-estimate MFR narrowband spectral albedos are used to determine a daily surface type (snow, 100% vegetation, partial vegetation, or 0% vegetation). For non-snow surfaces, a piecewise continuous function is used to estimate a high spectral resolution albedo at 1 min temporal and 10 cm-1 spectral resolution.

  17. Oral Mucositis Prevention By Low-Level Laser Therapy in Head-and-Neck Cancer Patients Undergoing Concurrent Chemoradiotherapy: A Phase III Randomized Study

    SciTech Connect (OSTI)

    Gouvea de Lima, Aline; Villar, Rosangela Correa; Castro, Gilberto de; Antequera, Reynaldo; Gil, Erlon; Rosalmeida, Mauro Cabral; Federico, Miriam Hatsue Honda; Snitcovsky, Igor Moises Longo

    2012-01-01

    Purpose: Oral mucositis is a major complication of concurrent chemoradiotherapy (CRT) in head-and-neck cancer patients. Low-level laser (LLL) therapy is a promising preventive therapy. We aimed to evaluate the efficacy of LLL therapy to decrease severe oral mucositis and its effect on RT interruptions. Methods and Materials: In the present randomized, double-blind, Phase III study, patients received either gallium-aluminum-arsenide LLL therapy 2.5 J/cm{sup 2} or placebo laser, before each radiation fraction. Eligible patients had to have been diagnosed with squamous cell carcinoma or undifferentiated carcinoma of the oral cavity, pharynx, larynx, or metastases to the neck with an unknown primary site. They were treated with adjuvant or definitive CRT, consisting of conventional RT 60-70 Gy (range, 1.8-2.0 Gy/d, 5 times/wk) and concurrent cisplatin. The primary endpoints were the oral mucositis severity in Weeks 2, 4, and 6 and the number of RT interruptions because of mucositis. The secondary endpoints included patient-reported pain scores. To detect a decrease in the incidence of Grade 3 or 4 oral mucositis from 80% to 50%, we planned to enroll 74 patients. Results: A total of 75 patients were included, and 37 patients received preventive LLL therapy. The mean delivered radiation dose was greater in the patients treated with LLL (69.4 vs. 67.9 Gy, p = .03). During CRT, the number of patients diagnosed with Grade 3 or 4 oral mucositis treated with LLL vs. placebo was 4 vs. 5 (Week 2, p = 1.0), 4 vs. 12 (Week 4, p = .08), and 8 vs. 9 (Week 6, p = 1.0), respectively. More of the patients treated with placebo had RT interruptions because of mucositis (6 vs. 0, p = .02). No difference was detected between the treatment arms in the incidence of severe pain. Conclusions: LLL therapy was not effective in reducing severe oral mucositis, although a marginal benefit could not be excluded. It reduced RT interruptions in these head-and-neck cancer patients, which might translate into improved CRT efficacy.

  18. Comparison of Capacity Value Methods for Photovoltaics in the Western United States

    SciTech Connect (OSTI)

    Madaeni, S. H.; Sioshansi, R.; Denholm, P.

    2012-07-01

    This report compares different capacity value estimation techniques applied to solar photovoltaics (PV). It compares more robust data and computationally intense reliability-based capacity valuation techniques to simpler approximation techniques at 14 different locations in the western United States. The capacity values at these locations are computed while holding the underlying power system characteristics fixed. This allows the effect of differences in solar availability patterns on the capacity value of PV to be directly ascertained, without differences in the power system confounding the results. Finally, it examines the effects of different PV configurations, including varying the orientation of a fixed-axis system and installing single- and double-axis tracking systems, on the capacity value. The capacity value estimations are done over an eight-year running from 1998 to 2005, and both long-term average capacity values and interannual capacity value differences (due to interannual differences in solar resource availability) are estimated. Overall, under the assumptions used in the analysis, we find that some approximation techniques can yield similar results to reliability-based methods such as effective load carrying capability.

  19. Public values related to decisions in the Tank Waste Remediation System Program

    SciTech Connect (OSTI)

    Armacost, L.L.; Robershotte, M.; von Winterfeldt, D.; Creighton, J.

    1994-10-01

    Managers of the Tank Waste Remediation System (TWRS) Program have to make numerous decisions, ranging from the strategic decisions on the fundamental tank cleanup goals to technical decisions on which types of equipment to use in mechanical retrieval of wastes. Furthermore, many of these decisions have to be made repeatedly (e.g., the annual allocation of research and development funds to TWRS activities). These decisions have many potential consequences in terms of risks to workers, risks to the public, environmental impacts, and economic development and cost. Because these consequences affect the values of many parties, the consequences need to be evaluated in terms that are accepted and understood by the interested parties. Therefore, an effort needs to be made to incorporate public concerns and values into the TWRS decision-making process. The purpose of this report is to review and integrate this past work on values and to create a maser list of values in order to create a consistent value framework for the numerous TWRS decisions; efficiently and effectively use public values in the decision-making process by updating this report on a regular basis to ensure that the information represents the public`s current views; provide guidance about using values in technical TWRS decisions.

  20. Value tradeoffs for the Hanford Tank Waste Remediation System (TWRS) program

    SciTech Connect (OSTI)

    Keeney, R.L.; Winterfeldt, D. von

    1997-09-01

    The Tank Waste Remediation System (TWRS) program at the Hanford Site of the Department of Energy has adopted a logical approach to making decisions that uses decision analysis to structure and analyze decision alternatives and public values to evaluate them. This report is the third in a series to support this effort. The first identified a set of objectives (called {open_quotes}ends objectives{close_quotes}) that characterize the ultimate goals and desires of Hanford decision makers and stakeholders. The second report developed operational measures for these ends objectives (called {open_quotes}ends measures{close_quotes}) and it also developed a set of performance objectives and associated performance measures that are more directly related to how well decision alternatives in the TWRS program perform to achieve the ends objectives. The present report describes the development of quantitative value tradeoffs for both the ends measures and the performance measures. First, five national value experts were interviewed to obtain value tradeoffs for units of the ends measures identified in Keeney and von Winterfeldt (1996). The results of this assessment are shown in Table S1. Second, the implied value tradeoffs for the units of the performance measures were calculated from the value tradeoffs for units of the ends measures provided by the national experts. When calculating the value tradeoffs for the units of the performance measures, very simple quantitative relationships between ends and performance measures were assumed. The results of this calculation are shown in Table S2. The results of this report shown in Tables S1 and S2 should be considered preliminary and largely illustrative of the principles for developing value tradeoffs. The report lists several important caveats and recommendations for how future work can improve on the assessment of value tradeoffs.

  1. CONVERSION OF WASTE CO2 AND SHALE GAS TO HIGH VALUE CHEMICALS | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy CONVERSION OF WASTE CO2 AND SHALE GAS TO HIGH VALUE CHEMICALS CONVERSION OF WASTE CO2 AND SHALE GAS TO HIGH VALUE CHEMICALS Novomer - Ithaca, NY Waste CO2 from industrial sources and ethane-derivatives from shale gas can be converted into high value chemical intermediates (e.g. acrylic acid) using combustion-assisted solid oxide electrolysis and 99% selective catalytic carbonylation chemistry. Preliminary estimates suggest a 20-40% reduction in both cradle to grave energy usage and

  2. PROCESS OF REMOVING PLUTONIUM VALUES FROM SOLUTION WITH GROUP IVB METAL PHOSPHO-SILICATE COMPOSITIONS

    DOE Patents [OSTI]

    Russell, E.R.; Adamson, A.W.; Schubert, J.; Boyd, G.E.

    1957-10-29

    A process for separating plutonium values from aqueous solutions which contain the plutonium in minute concentrations is described. These values can be removed from an aqueous solution by taking an aqueous solution containing a salt of zirconium, titanium, hafnium or thorium, adding an aqueous solution of silicate and phosphoric acid anions to the metal salt solution, and separating, washing and drying the precipitate which forms when the two solutions are mixed. The aqueous plutonium containing solution is then acidified and passed over the above described precipi-tate causing the plutonium values to be adsorbed by the precipitate.

  3. WORKSHOP: HIGH VALUE ROLL TO ROLL MANUFACTURING INNOVATION, DECEMBER 2-3 |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy WORKSHOP: HIGH VALUE ROLL TO ROLL MANUFACTURING INNOVATION, DECEMBER 2-3 WORKSHOP: HIGH VALUE ROLL TO ROLL MANUFACTURING INNOVATION, DECEMBER 2-3 December 2, 2015 8:00AM EST to December 3, 2015 3:30PM EST The Advanced Manufacturing Office (AMO) is planning to host a workshop at the Westin Alexandria on 2-3 December, 2015. This 2-day workshop will focus on the on the advanced manufacturing technology topic of High Value Roll To Roll (HV R2R). Categories for discussion

  4. Glen Canyon Dam, Colorado River Storage Project, Arizona: Nonuse values study final report

    SciTech Connect (OSTI)

    Welsh, M.P.; Bishop, R.C.; Phillips, M.L.; Baumgartner, R.M.

    1997-10-01

    Nonuse or passive use economic value is the value of a natural resource held by individuals who may not physically use the resource. The goal of the Glen Canyon Environmental Studies (GCES) Nonuse Study was to estimate the total economic value for changes in the operation of Glen Canyon Dam. This four year effort included extensive qualitative research, a number of focus groups, a survey design phase, two reviews by the Office of Management and Budget, a pilot-test phase, and a final survey of 8,000 households in the United States. This document details the approach, methodology, analysis, and the results of that study.

  5. Glen Canyon Dam, Colorado River Storage Project, Arizona. Final nonuse values study summary report

    SciTech Connect (OSTI)

    1997-12-31

    Nonuse or passive use economic value is the value of a natural resource held by individuals who may not physically use the resource. The goal of the Glen Canyon Environmental Studies (GCES) Nonuse Study was to estimate the total economic value for changes in the operation of Glen Canyon Dam. This four year effort included extensive qualitative research, a number of focus groups, a survey design phase, two reviews by the Office of Management and Budget, a pilot-test phase, and a final survey of 8,000 households in the United States. This document summarizes the approach, methodology, analysis, and results of that study.

  6. Station-based Surface Data Value-Added Product (Technical Report) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect Station-based Surface Data Value-Added Product Citation Details In-Document Search Title: Station-based Surface Data Value-Added Product This report describes the Atmospheric Radiation Measurement (ARM) Best Estimate (ARMBE) station-based surface data (ARMBESTNS) value-added product. It is a twin data product of the ARMBE 2-Dimensional gridded (ARMBE2DGRID) data set. Unlike the ARMBE2DGRID data set, ARMBESTNS data are reported at the original site locations and show the original

  7. Market values summary/April market review/current market data

    SciTech Connect (OSTI)

    1995-05-01

    This article is the April 1995 uranium market summary. Overall market activity during this period was low, with five deals in the concentrates market, two deals in the long-term natural uranium market, and three deals in the spot enrichment market. There were no spot trades in the UF6 or conversion market. The restricted and unrestricted exchange values were $11.60 and $7.35 respectively. The restricted and unrestricted UF6 values were $36.00 and $25.50, and the restricted and unrestricted transaction values were $10.30 and $7.25. Active uranium supply rose, and active demand fell.

  8. NREL Finds Up to 6-cent per Kilowatt-Hour Extra Value with Concentrated

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Solar Power - News Releases | NREL Finds Up to 6-cent per Kilowatt-Hour Extra Value with Concentrated Solar Power The greater the penetration of renewables in California, the greater the value of CSP with thermal storage capacity June 9, 2014 Concentrating Solar Power (CSP) projects would add additional value of 5 or 6 cents per kilowatt hour to utility-scale solar energy in California where 33 percent renewables will be mandated in six years, a new report by the Energy Department's National

  9. The Impact of Wind and Solar on the Value of Energy Storage

    Broader source: Energy.gov [DOE]

    The purpose of this analysis is to examine how the value proposition for energy storage changes as a function of wind and solar power penetration. It uses a grid modeling approach comparing the operational costs of an electric power system both with and without added storage. It creates a series of scenarios with increasing wind and solar power penetration and examines how the value of storage changes. It also explores the mechanisms behind this change in value, including the change in on-peak and off-peak price differentials and the cost of operating reserves created by increased penetration of wind and solar energy.

  10. Data embedding employing degenerate clusters of data having differences less than noise value

    DOE Patents [OSTI]

    Sanford, M.T. II; Handel, T.G.

    1998-10-06

    A method of embedding auxiliary information into a set of host data, such as a photograph, television signal, facsimile transmission, or identification card. All such host data contain intrinsic noise, allowing pixels in the host data which are nearly identical and which have values differing by less than the noise value to be manipulated and replaced with auxiliary data. As the embedding method does not change the elemental values of the host data, the auxiliary data do not noticeably affect the appearance or interpretation of the host data. By a substantially reverse process, the embedded auxiliary data can be retrieved easily by an authorized user. 35 figs.

  11. Data embedding employing degenerate clusters of data having differences less than noise value

    DOE Patents [OSTI]

    Sanford, II, Maxwell T.; Handel, Theodore G.

    1998-01-01

    A method of embedding auxiliary information into a set of host data, such as a photograph, television signal, facsimile transmission, or identification card. All such host data contain intrinsic noise, allowing pixels in the host data which are nearly identical and which have values differing by less than the noise value to be manipulated and replaced with auxiliary data. As the embedding method does not change the elemental values of the host data, the auxiliary data do not noticeably affect the appearance or interpretation of the host data. By a substantially reverse process, the embedded auxiliary data can be retrieved easily by an authorized user.

  12. Quantifying the performance of charge-coupled devices in ambient conditions - Oral presentation

    SciTech Connect (OSTI)

    Dungee, Ryan

    2015-08-22

    Telescope surveys have given us a great deal of information about our universe, but the images they capture carry with them an inherent limitation. The question then is how do we take this information to the next level? The answer: the Dark Energy Spectroscopic Instrument (DESI). DESI is an instrument that will measure the distance to tens of millions of galaxies in our night sky. This information can be combined with already existing images to construct a three dimensional map of our universe providing a great deal of new opportunities for cosmological research. The DESI guidance system consists of 10 detectors called charge-coupled devices (CCDs). Each CCD is made of silicon atoms that emit electrons when struck with light, the electrons are counted and then used to reconstruct an image. But, CCDs suffer from an issue known as dark current which are false counts that come from thermal motions of the silicon atoms. This is particularly problematic since they contribute to the uncertainty of a measurement without contributing to our signal. This causes a drop in the signal to noise ratio, a value that needs to be maximized in order to meet DESIs high precision requirements. This summer was spent ensuring the DESI guidance system would meet its specifications. Data was collected using a CCD of the same type that would be used on DESI and the effectiveness of dark current removal was tested. Exposures were taken for a wide range of temperatures and exposure lengths and a number of dark current removal methods were implemented. While further testing is required, the initial results are quite promising and the DESI guidance system is on track to meet its specifications

  13. An Introduction to the EnergyValue Housing Awards (EVHA) … Everything...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    An Introduction to the EnergyValue Housing Awards (EVHA) - Everything You Should Know to Complete a Quality Application Building America Whole-House Solutions for New Homes: Nexus ...

  14. VALUES OF I AND I{sub adj} SUGGESTED BY THE SUBCOMMITTEE (Technical...

    Office of Scientific and Technical Information (OSTI)

    Citation Details In-Document Search Title: VALUES OF I AND Isub adj SUGGESTED BY THE SUBCOMMITTEE Authors: Turner, J. E. Publication Date: 1964-01-01 OSTI Identifier: 4887411 ...

  15. Stakeholder Engagement and Outreach March Webinar: Wind Energy and Property Values

    Broader source: Energy.gov [DOE]

    DOE's Stakeholder Engagement and Outreach initiative will host a webinar presenting the topic of wind turbines and property values. Lead author Carol Atkinson-Palombo, assistant professor at the...

  16. Global Fuel Cells Market to Value USD910.3 million by 2018 |...

    Open Energy Info (EERE)

    Global Fuel Cells Market to Value USD910.3 million by 2018 Home > Groups > Renewable Energy RFPs John55364's picture Submitted by John55364(100) Contributor 15 May, 2015 - 02:14...

  17. Strategies for Mitigating the Reduction in Economic Value of Variable Generation with Increasing Penetration Levels

    SciTech Connect (OSTI)

    Mills, Andrew; Wiser, Ryan

    2014-03-03

    In this report, we evaluate individual options that have the potential to stem the decline in the marginal value of variable generation (VG) with increasing penetration levels. We focus only on the effectiveness of mitigation measures for wind and PV.

  18. Framework for Evaluating the Total Value Proposition of Clean Energy Technologies

    SciTech Connect (OSTI)

    Pater, J. E.

    2006-02-01

    Conventional valuation techniques fail to include many of the financial advantages of clean energy technologies. By omitting benefits associated with risk management, emissions reductions, policy incentives, resource use, corporate social responsibility, and societal economic benefits, investors and firms sacrifice opportunities for new revenue streams and avoided costs. In an effort to identify some of these externalities, this analysis develops a total value proposition for clean energy technologies. It incorporates a series of values under each of the above categories, describing the opportunities for recapturing investments throughout the value chain. The framework may be used to create comparable value propositions for clean energy technologies supporting investment decisions, project siting, and marketing strategies. It can also be useful in policy-making decisions.

  19. Thermal plasma process for recovering monomers and high value carbons from polymeric materials

    DOE Patents [OSTI]

    Knight, Richard; Grossmann, Elihu D.; Guddeti, Ravikishan R.

    2002-01-01

    The present invention relates to a method of recycling polymeric waste products into monomers and high value forms of carbon by pyrolytic conversion using an induction coupled RF plasma heated reactor.

  20. Where do the default values for the cost of system breakdowns...

    Open Energy Info (EERE)

    Where do the default values for the cost of system breakdowns come from in SAM, for direct and indirect costs, such as 0.63 per DC watt for panels. 0.18 for inverters. Are these...

  1. Anomalously High B-Values In The South Flank Of Kilauea Volcano...

    Open Energy Info (EERE)

    down rift. The anomalously high b-values at the center of the South Flank, several kilometers away from the rift, may be explained by unusually high pore pressure throughout the...

  2. Determining the Capacity Value of Wind: An Updated Survey of Methods and Implementation; Preprint

    SciTech Connect (OSTI)

    Milligan, M.; Porter, K.

    2008-06-01

    This paper summarizes state and regional studies examining the capacity value of wind energy, how different regions define and implement capacity reserve requirements, and how wind energy is defined as a capacity resource in those regions.

  3. Shared Value in Utility and Efficiency Partnerships-- Lessons in Perseverance, Flexibility and Mutual Respect

    Broader source: Energy.gov [DOE]

    Shared Value in Utility and Efficiency Partnerships Lessons in Perseverance, Flexibility and Mutual Respect, July 10, 2012. Provides an overview of the complexity of partnerships between utilities and local energy efficiency programs, as well as the benefits.

  4. EIA Energy Efficiency-Table 4b. Value of Production by Selected...

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    b Page Last Modified: May 2010 Table 4b. Value of Production 1 by Selected Industries, 1998, 2002, and 2006 (Billion 2000 Dollars ) MECS Survey Years NAICS Subsector and Industry...

  5. EIA Energy Efficiency-Table 4a. Value of Shipments by Selected...

    Gasoline and Diesel Fuel Update (EIA)

    Table 4a Page Last Modified: May 2010 Table 4a. Value of Shipments1 by Selected Industries, 1998, 2002, and 2006 (Billion 2000 Dollars ) MECS Survey Years NAICS Subsector and...

  6. EIA Energy Efficiency-Table 3d. Value Added by Selected Industries...

    Gasoline and Diesel Fuel Update (EIA)

    d Page Last Modified: May 2010 Table 3d. Value Added1 by Selected Industries, 1998, 2002, and 2006 (Current Brillion Dollars) MECS Survey Years NAICS Subsector and Industry 1998...

  7. EIA Energy Efficiency-Table 3b. Value of Production a by Selected...

    Gasoline and Diesel Fuel Update (EIA)

    and 2006 > Table 3b Page Last Modified: May 2010 Table 3b. Value of Production 1 by Selected Industries, 1998, 2002, and 2006 (Current Billion Dollars) MECS Survey Years NAICS...

  8. EIA Energy Efficiency-Table 3a. Value of Shipments by Selected...

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    a Page Last Modified: May 2010 Table 3a. Value of Shipments 1 by Selected Industries, 1998, 2002, and 2006 (Current Billion Dollars) MECS Survey Years NAICS Subsector and Industry...

  9. EIA Energy Efficiency-Table 3c. Capacity Adjusted Value of Production...

    Gasoline and Diesel Fuel Update (EIA)

    c Page Last Modified: May 2010 Table 3c. Capacity Adjusted Value of Production 1 by Selected Industries, 1998, 2002, and 2006 (Current Billion Dollars) MECS Survey Years NAICS...

  10. EIA Energy Efficiency-Table 4d. Value Added by Selected Industries...

    Gasoline and Diesel Fuel Update (EIA)

    d Page Last Modified: May 2010 Table 4d. Value Added1 by Selected Industries, 1998, 2002, and 2006 (Billion 2000 Dollars 2) MECS Survey Years NAICS Subsector and Industry 1998 2002...

  11. EIA Energy Efficiency-Table 4c. Capacity Adjusted Value of Production...

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    c Page Last Modified: May 2010 Table 4c. Capacity Adjusted Value of Production 1 by Selected Industries, 1998, 2002, and 2006 (Billion 2000 Dollars 2) MECS Survey Years NAICS...

  12. Extremal covariant positive operator valued measures: The case of a compact symmetry group

    SciTech Connect (OSTI)

    Carmeli, Claudio; Heinosaari, Teiko; Pellonpaeae, Juha-Pekka; Toigo, Alessandro

    2008-06-15

    Given a unitary representation U of a compact group G and a transitive G-space {omega}, we characterize the extremal elements of the convex set of all U-covariant positive operator valued measures.

  13. Energy in the United States: environmental and economic values in conflict

    SciTech Connect (OSTI)

    McKinley, A.F.; Swisher, J.N.

    1982-01-01

    A national energy policy with which most people can agree has failed to emerge since the 1973 oil embargo. The cause is not a lack of reliable data or reasonable goals. Rather, a major divergence exists in the fundamental social vlaues that influence energy decisions. People with environmental values and those with conventional values have disagreed on most energy issues, especially nuclear power. Summarized is a two-year Stanford University study which identified the conflicting value systems and several future energy systems that could evolve, given the influence of each value system. Some recent conclusions are included. Although no compromise between environmentalists and conventionalists is likely, the energy problem is soluble regardless of which bias dominates policy decisions, but only if energy demand growth is arrested. Many efficiency improvements can be implemented without significant lifestyle interruptions. Implementation of these improvements is uncertain due to institutional obstacles and economic distortions.

  14. Converting biomass to fuels and high-value chemicals | The Ames...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Converting biomass to fuels and high-value chemicals The goal of this research is to develop low cost catalysts based on graphene-derived nanomaterials, and use them to improve the...

  15. NREL Quantifies Value of CSP to the Grid (Fact Sheet), NREL (National Renewable Energy Laboratory)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In California study, greater penetration of renewable energy means greater value of CSP with thermal energy storage. The penetration of variable-generation renewable energy sources is growing in the state of California. To help utility planners understand the potential impact of this situation, research- ers at the National Renewable Energy Laboratory (NREL) analyzed concentrating solar power (CSP) with thermal energy storage (TES), looking at the value of both CSP-TES and utility-scale

  16. The Value of Distributed Generation and CHP Resources in Wholesale Power

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Markets, September 2005 | Department of Energy The Value of Distributed Generation and CHP Resources in Wholesale Power Markets, September 2005 The Value of Distributed Generation and CHP Resources in Wholesale Power Markets, September 2005 Distributed generation and combined heat and power (DG/CHP) projects are usually considered as resources for the benefit of the electricity consumer not the utility power system. This report evaluates DG/CHP as wholesale power resources, installed on the

  17. MODEL REDUCTION WITH MAPREDUCE-ENABLED TALL AND SKINNY SINGULAR VALUE

    Office of Scientific and Technical Information (OSTI)

    DECOMPOSITION. (Journal Article) | SciTech Connect MODEL REDUCTION WITH MAPREDUCE-ENABLED TALL AND SKINNY SINGULAR VALUE DECOMPOSITION. Citation Details In-Document Search Title: MODEL REDUCTION WITH MAPREDUCE-ENABLED TALL AND SKINNY SINGULAR VALUE DECOMPOSITION. Abstract not provided. Authors: Templeton, Jeremy Alan ; Constantine, Paul G. ; Gleich, David F. ; Hou, Yangyang Publication Date: 2013-06-01 OSTI Identifier: 1110659 Report Number(s): SAND2013-4939J 456438 DOE Contract Number:

  18. MWRRET Value-Added Product: The Retrieval of Liquid Water Path and

    Office of Scientific and Technical Information (OSTI)

    Precipitable Water Vapor from Microwave Radiometer (MWR) Data Sets (Revision 2) (Technical Report) | SciTech Connect MWRRET Value-Added Product: The Retrieval of Liquid Water Path and Precipitable Water Vapor from Microwave Radiometer (MWR) Data Sets (Revision 2) Citation Details In-Document Search Title: MWRRET Value-Added Product: The Retrieval of Liquid Water Path and Precipitable Water Vapor from Microwave Radiometer (MWR) Data Sets (Revision 2) This report provides a short description

  19. MWRRET Value-Added Product: The Retrieval of Liquid Water Path and

    Office of Scientific and Technical Information (OSTI)

    Precipitable Water Vapor from Microwave Radiometer (MWR) Data Sets (Revision 2) (Technical Report) | SciTech Connect MWRRET Value-Added Product: The Retrieval of Liquid Water Path and Precipitable Water Vapor from Microwave Radiometer (MWR) Data Sets (Revision 2) Citation Details In-Document Search Title: MWRRET Value-Added Product: The Retrieval of Liquid Water Path and Precipitable Water Vapor from Microwave Radiometer (MWR) Data Sets (Revision 2) × You are accessing a document from the

  20. Top Value-Added Chemicals from Biomass - Volume II„Results of Screening

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for Potential Candidates from Biorefinery Lignin | Department of Energy Value-Added Chemicals from Biomass - Volume II„Results of Screening for Potential Candidates from Biorefinery Lignin Top Value-Added Chemicals from Biomass - Volume II„Results of Screening for Potential Candidates from Biorefinery Lignin This report evaluates lignins role as a renewable raw material resource. PDF icon pnnl-16983.pdf More Documents & Publications Low Cost Carbon Fiber from Renewable Resources ITP

  1. Biopower Report Presents Methodology for Assessing the Value of Co-Firing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Biomass in Pulverized Coal Plants | Department of Energy Biopower Report Presents Methodology for Assessing the Value of Co-Firing Biomass in Pulverized Coal Plants Biopower Report Presents Methodology for Assessing the Value of Co-Firing Biomass in Pulverized Coal Plants November 20, 2014 - 12:22pm Addthis A joint Idaho National Laboratory (INL) and Pacific Northwest National Laboratory (PNNL) report presents the results of an evaluation funded by the Bioenergy Technologies Office that

  2. DOE ZERH Webinar: Sales and Value Recognition of ZERH | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Sales and Value Recognition of ZERH DOE ZERH Webinar: Sales and Value Recognition of ZERH Watch the video or view the presentation slides below Net Zero Energy properties have unique, high-performance features that should be prominently presented during the listing and sales process. However, these features also present challenges for appraisers and lenders: Lenders are challenged to find appraisers with competency and competent appraisers are challenged with limited Net Zero Energy

  3. Insulation Project Moves Toward Higher R-value | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Insulation Project Moves Toward Higher R-value Insulation Project Moves Toward Higher R-value April 26, 2016 - 3:51pm Addthis Oak Ridge National Laboratory's Kaushik Biswas analyzes small-scale modified atmospheric insulation foam composites in a multi-transducer heat flow meter apparatus. Oak Ridge National Laboratory's Kaushik Biswas analyzes small-scale modified atmospheric insulation foam composites in a multi-transducer heat flow meter apparatus. This article originally appeared in the Oak

  4. Robust Waste-to-Value Solution Using Advanced Monitoring and Controls

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Flexible Distributed Energy and Water from Waste for the Food and Beverage Industry ADVANCED MANUFACTURING OFFICE Robust Waste-to-Value Solution Using Advanced Monitoring and Controls Introduction Waste-to-value is a promising and comprehensive wastewater processing solution being pursued by GE that recovers valuable energy and purifed water from the abundant wastewater generated and currently discharged in many industries. A key challenge to the successful implementation and commercialization

  5. Livermore Field Office sets core values as part of continuous improvement

    National Nuclear Security Administration (NNSA)

    process | National Nuclear Security Administration Livermore Field Office sets core values as part of continuous improvement process Monday, November 23, 2015 - 9:18am NNSA Blog At their recent off-site continuous improvement session, the NNSA Livermore Field Office (LFO) in California unveiled their new set of core values: Integrity - Trustworthy, Reliable, Ethical We are responsible stewards of federal resources Collaboration - Communicate, Support, Team-Focused We work together,

  6. 2006-2007 CHP Action Plan, Positioning CHP Value: Solutions for National,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Regional and Local Energy Issues, September 2006 | Department of Energy 6-2007 CHP Action Plan, Positioning CHP Value: Solutions for National, Regional and Local Energy Issues, September 2006 2006-2007 CHP Action Plan, Positioning CHP Value: Solutions for National, Regional and Local Energy Issues, September 2006 This Action Agenda is intended to provide the situational context in which the annual Combined Heat and Power (CHP) roadmap workshop will set its priorities for the upcoming year

  7. An Introduction to the EnergyValue Housing Awards (EVHA) - Everything You

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Should Know to Complete a Quality Application | Department of Energy - Everything You Should Know to Complete a Quality Application An Introduction to the EnergyValue Housing Awards (EVHA) - Everything You Should Know to Complete a Quality Application This webinar reviewed the history and goals of the EnergyValue Housing Awards (EVHA) Program, including comments from past winners and an overview of how to complete a quality application. File webinar_evha_20110707.wmv More Documents &

  8. An Introduction to the EnergyValue Housing Awards (EVHA) … Everything You

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Should Know to Complete a Quality Application Webinar Slides | Department of Energy … Everything You Should Know to Complete a Quality Application Webinar Slides An Introduction to the EnergyValue Housing Awards (EVHA) … Everything You Should Know to Complete a Quality Application Webinar Slides Slides for the Building America webinar on July 7, 2011. PDF icon webinar_evha_program_20110707.pdf More Documents & Publications An Introduction to the EnergyValue Housing Awards (EVHA) -

  9. Representation of Solar Capacity Value in the ReEDS Capacity Expansion Model

    SciTech Connect (OSTI)

    Sigrin, B.; Sullivan, P.; Ibanez, E.; Margolis, R.

    2014-03-01

    An important issue for electricity system operators is the estimation of renewables' capacity contributions to reliably meeting system demand, or their capacity value. While the capacity value of thermal generation can be estimated easily, assessment of wind and solar requires a more nuanced approach due to the resource variability. Reliability-based methods, particularly assessment of the Effective Load-Carrying Capacity, are considered to be the most robust and widely-accepted techniques for addressing this resource variability. This report compares estimates of solar PV capacity value by the Regional Energy Deployment System (ReEDS) capacity expansion model against two sources. The first comparison is against values published by utilities or other entities for known electrical systems at existing solar penetration levels. The second comparison is against a time-series ELCC simulation tool for high renewable penetration scenarios in the Western Interconnection. Results from the ReEDS model are found to compare well with both comparisons, despite being resolved at a super-hourly temporal resolution. Two results are relevant for other capacity-based models that use a super-hourly resolution to model solar capacity value. First, solar capacity value should not be parameterized as a static value, but must decay with increasing penetration. This is because -- for an afternoon-peaking system -- as solar penetration increases, the system's peak net load shifts to later in the day -- when solar output is lower. Second, long-term planning models should determine system adequacy requirements in each time period in order to approximate LOLP calculations. Within the ReEDS model we resolve these issues by using a capacity value estimate that varies by time-slice. Within each time period the net load and shadow price on ReEDS's planning reserve constraint signals the relative importance of additional firm capacity.

  10. Ion Acceleration by Laser Plasma Interaction from Cryogenic Micro Jets - Oral Presentation

    SciTech Connect (OSTI)

    Propp, Adrienne

    2015-08-25

    Processes that occur in extreme conditions, such as in the center of stars and large planets, can be simulated in the laboratory using facilities such as SLAC National Accelerator Laboratory and the Jupiter Laser Facility (JLF) at Lawrence Livermore National Laboratory (LLNL). These facilities allow scientists to investigate the properties of matter by observing their interactions with high power lasers. Ion acceleration from laser plasma interaction is gaining greater attention today due to its widespread potential applications, including proton beam cancer therapy and fast ignition for energy production. Typically, ion acceleration is achieved by focusing a high power laser on thin foil targets through a mechanism called Target Normal Sheath Acceleration. Based on research and recent experiments, we hypothesized that a pure liquid cryogenic jet would be an ideal target for this type of interaction, capable of producing the highest proton energies possible with today’s laser technologies. Furthermore, it would provide a continuous, pure target, unlike metal foils which are consumed in the interaction and easily contaminated. In an effort to test this hypothesis and investigate new, potentially more efficient mechanisms of ion acceleration, we used the 527 nm split beam, frequency-doubled TITAN laser at JLF. Data from the cryogenic jets was limited due to the flow of current up the jet into the nozzle during the interaction, heating the jet and damaging the orifice. However, we acheived a pure proton beam with an indiciation of a monoenergetic feature. Furthermore, data from gold and carbon wires showed surprising and interesting results. Preliminary analysis of data from two ion emission diagnostics, Thomson parabola spectrometers (TPs) and radio chromic films (RCFs), suggests that shockwave acceleration occurred rather than target normal sheath acceleration, the standard mechanism of ion acceleration. Upon completion of the experiment at TITAN, I researched the possibility of transforming our liquid cryogenic jets into droplet streams. This type of target should solve our problems with the jet as it will prevent the flow of exocurrent into the nozzle. It is also highly effective as it is even more mass-limited than standard cryogenic jets. Furthermore, jets break up spontaneously anyway. If we can control the breakup, we can synchronize the droplet emission with the laser pulses. In order to assist the team prepare for an experiment later this year, I familiarized myself with the physics and theory of droplet formation, calculated values for the required parameters, and ordered the required materials for modification of the jet. Future experiments will test these droplet streams and continue towards the goal of ion acceleration using cryogenic targets.

  11. Analysis of historical delta values for IAEA/LANL NDA training courses

    SciTech Connect (OSTI)

    Geist, William; Santi, Peter; Swinhoe, Martyn; Bonner, Elisa

    2009-01-01

    The Los Alamos National Laboratory (LANL) supports the International Atomic Energy Agency (IAEA) by providing training for IAEA inspectors in neutron and gamma-ray Nondestructive Assay (NDA) of nuclear material. Since 1980, all new IAEA inspectors attend this two week course at LANL gaining hands-on experience in the application of NDA techniques, procedures and analysis to measure plutonium and uranium nuclear material standards with well known pedigrees. As part of the course the inspectors conduct an inventory verification exercise. This exercise provides inspectors the opportunity to test their abilities in performing verification measurements using the various NDA techniques. For an inspector, the verification of an item is nominally based on whether the measured assay value agrees with the declared value to within three times the historical delta value. The historical delta value represents the average difference between measured and declared values from previous measurements taken on similar material with the same measurement technology. If the measurement falls outside a limit of three times the historical delta value, the declaration is not verified. This paper uses measurement data from five years of IAEA courses to calculate a historical delta for five non-destructive assay methods: Gamma-ray Enrichment, Gamma-ray Plutonium Isotopics, Passive Neutron Coincidence Counting, Active Neutron Coincidence Counting and the Neutron Coincidence Collar. These historical deltas provide information as to the precision and accuracy of these measurement techniques under realistic conditions.

  12. An Empirical Method for deriving RBE values associated with Electrons, Photons and Radionuclides

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Bellamy, Michael B; Eckerman, Keith F; Hertel, Nolan

    2015-01-01

    There is substantial evidence to justify using relative biological effectiveness (RBE) values greater than one for low-energy electrons and photons. But, in the field of radiation protection, radiation associated with low linear energy transfer (LET) has been assigned a radiation weighting factor $w_R$ of one. This value may be suitable for radiation protection but, for risk considerations, it is important to evaluate the potential elevated biological effectiveness of radiation to improve the quality of risk estimates. RBE values between 2 and 3 for tritium are implied by several experimental measurements. Additionally, elevated RBE values have been found for other similarmore » low-energy radiation sources. In this work, RBE values are derived for electrons based upon the fractional deposition of absorbed dose of energies less than a few keV. Using this empirical method, RBE values were also derived for monoenergetic photons and 1070 radionuclides from ICRP Publication 107 for which photons and electrons are the primary emissions.« less

  13. Assessing the credibility of the calorific value of municipal solid waste

    SciTech Connect (OSTI)

    Churney, K.L.; Domalski, E.S.; Ledford, A.E.; Colbert, J.C.; Bruce, S.S.; Buckley, T.J.; Paule, R.C.; Reilly, M.L.

    1984-02-01

    A study has been made at the National Bureau of Standards to establish the limits of reliability of the calorific value of municipal solid waste (MSW) determined by the bomb calorimetric procedure currently used in commercial test laboratories. This procedure involves using gram-size samples derived from MSW that has been processed down to a particle size of 2 mm or less. Critics of the procedure argue that gram-size samples are too small to be representative of such a large quantity of so heterogeneous a material, and that processing MSW may also alter its composition. To test the bomb calorimetric procedure, a 2.5 kg capacity combustion flow calorimeter was designed and constructed for the determination of the enthalpies of combustion of kilogram-size samples of MSW in flowing oxygen near atmospheric pressure. Calorimetric data on processed MSW were obtained using both the kilogram-size flow and a gram-size bomb calorimeter. Intercomparison of results shows that the calorific value (on a dry basis) of gram-size test samples agrees, within the uncertainty of our experiments, with the corresponding values for their kilogram-size parent samples provided that the sample division technique used to obtain the gram-size samples is that described in this work. The average difference of the parent minus gram-size sample values (on a dry basis) is -0.1% with an imprecision (95% confidence interval) of +-1.1% of the mean calorific value. The effects of processing on sample composition were determined by intercomparison of flow calorimetric results on kilogram-size samples of processed and minimally processed MSW (150 mm or less particle size) that are nominally identical. The average difference of the unprocessed minus processed values (on a dry basis) is -0.5% with an imprecision (95% confidence interval) of +-2.9% of the mean calorific value. 7 references, 4 figures, 10 tables.

  14. Plug-In Hybrid Electric Vehicle Value Proposition Study: Phase 1, Task 2: Select Value Propositions/Business Model for Further Study

    SciTech Connect (OSTI)

    Sikes, Karen R; Markel, Lawrence C; Hadley, Stanton W; Hinds, Shaun

    2008-04-01

    The Plug-In Hybrid Electric Vehicle (PHEV) Value Propositions Workshop held in Washington, D.C. in December 2007 served as the Task 1 Milestone for this study. Feedback from all five Workshop breakout sessions has been documented in a Workshop Summary Report, which can be found at www.sentech.org/phev. In this report, the project team compiled and presented a comprehensive list of potential value propositions that would later serve as a 'grab bag' of business model components in Task 2. After convening with the Guidance and Evaluation Committee and other PHEV stakeholders during the Workshop, several improvements to the technical approach were identified and incorporated into the project plan to present a more realistic and accurate case study and evaluation. The assumptions and modifications that will have the greatest impact on the case study selection process in Task 2 are described in more detail in this deliverable. The objective of Task 2 is to identify the combination of value propositions that is believed to be achievable by 2030 and collectively hold promise for a sustainable PHEV market by 2030. This deliverable outlines what the project team (with input from the Committee) has defined as its primary scenario to be tested in depth for the remainder of Phase 1. Plans for the second and third highest priority/probability business scenarios are also described in this deliverable as proposed follow up case studies in Phase 2. As part of each case study description, the proposed utility system (or subsystem), PHEV market segment, and facilities/buildings are defined.

  15. Tivantinib (ARQ-197) exhibits anti-tumor activity with down-regulation of FAK in oral squamous cell carcinoma

    SciTech Connect (OSTI)

    Xi, Wei-Hong; Yang, Li-Yun; Cao, Zhong-Yi; Qian, Yong

    2015-02-20

    Oral squamous cell carcinoma (OSCC) is one of the most common cancers worldwide and the 5 years survival rate of the patients is about 60% in the USA, due to acquired chemotherapeutic resistance and metastasis of the disease. In this study, we found that tivantinib, a selective MET inhibitor, suppresses OCSS cell proliferation and colony formation, however, anti-tumor activities induced by tivantinib are independent of the inhibition of MET signaling pathway. In addition, tivantinib cause G2/M cell cycle arrest and caspases-dependent apoptosis in OSCC cell lines. We also found that tivantinib dose-dependently suppressed the activation and expression of FAK. In all, these data suggested that tivantinib may be developed as a chemotherapeutic agent to effectively treat certain cancers including OSCC. - Highlights: • Tivantinib suppresses OSCC cell growth independent of the inhibition of HGF/MET signaling pathway. • Tivantinib blocks cell cycle and induces caspases-mediated apoptosis. • Tivantinib elicits its anti-tumor activity with the inhibition of FAK signaling pathway.

  16. Baseline and Target Values for PV Forecasts: Toward Improved Solar Power Forecasting: Preprint

    SciTech Connect (OSTI)

    Zhang, Jie; Hodge, Bri-Mathias; Lu, Siyuan; Hamann, Hendrik F.; Lehman, Brad; Simmons, Joseph; Campos, Edwin; Banunarayanan, Venkat

    2015-08-05

    Accurate solar power forecasting allows utilities to get the most out of the solar resources on their systems. To truly measure the improvements that any new solar forecasting methods can provide, it is important to first develop (or determine) baseline and target solar forecasting at different spatial and temporal scales. This paper aims to develop baseline and target values for solar forecasting metrics. These were informed by close collaboration with utility and independent system operator partners. The baseline values are established based on state-of-the-art numerical weather prediction models and persistence models. The target values are determined based on the reduction in the amount of reserves that must be held to accommodate the uncertainty of solar power output. forecasting metrics. These were informed by close collaboration with utility and independent system operator partners. The baseline values are established based on state-of-the-art numerical weather prediction models and persistence models. The target values are determined based on the reduction in the amount of reserves that must be held to accommodate the uncertainty of solar power output.

  17. Capacity Value of PV and Wind Generation in the NV Energy System

    SciTech Connect (OSTI)

    Lu, Shuai; Diao, Ruisheng; Samaan, Nader A.; Etingov, Pavel V.

    2014-03-21

    Calculation of photovoltaic (PV) and wind power capacity values is important for estimating additional load that can be served by new PV or wind installations in the electrical power system. It also is the basis for assigning capacity credit payments in systems with markets. Because of variability in solar and wind resources, PV and wind generation contribute to power system resource adequacy differently from conventional generation. Many different approaches to calculating PV and wind generation capacity values have been used by utilities and transmission operators. Using the NV Energy system as a study case, this report applies peak-period capacity factor (PPCF) and effective load carrying capability (ELCC) methods to calculate capacity values for renewable energy sources. We show the connection between the PPCF and ELCC methods in the process of deriving a simplified approach that approximates the ELCC method. This simplified approach does not require generation fleet data and provides the theoretical basis for a quick check on capacity value results of PV and wind generation. The diminishing return of capacity benefit as renewable generation increases is conveniently explained using the simplified capacity value approach.

  18. Buildings Energy Data Book: 1.3 Value of Construction and Research

    Buildings Energy Data Book [EERE]

    2 Value of New Building Construction Relative to GDP, by Year ($2010 Billion) Value of New Construction Put in Place Bldgs. Percent of Residential Commercial (1) All Bldgs. (1) GDP Total U.S. GDP 1980 5.0% 1985 5.8% 1990 4.9% 1995 4.4% 2000 5.2% 2005 6.0% 2006 5.9% 2007 5.2% 2008 4.4% 2009 3.3% 2010 2.6% Note(s): Source(s): 129.8 247.7 377.4 14,660 1) New buildings construction differs from Table 1.3.2 by excluding industrial building construction. DOC, Current Construction Reports: Value of New

  19. Market values summary/October market review/current market data

    SciTech Connect (OSTI)

    1994-11-01

    This article is the October uranium market summary. During this period, volume increased to 2.2 Mlb U3O8 on the spot concentrates market. The unrestricted and restricted exchange values remained steady at $7.00 and $9.05 per pound U3O8 respectively. There were two UF6 deals during this period, and with supply more than adequate to meet the demand, the restricted UF6 price remained unchanged at $29.00 per kgU as UF6. The unrestricted value increased slightly to $24.50. The conversion value was unchanged, and the enrichment services market/prices weakened. Both active supply and demand decreased during this period.

  20. Market values summary/March market review/current market data

    SciTech Connect (OSTI)

    1995-04-01

    This article is the March 1995 uranium market summary. There were 14 near-term deals is natural uranium market for a total of 5.2 Mlb. The restricted exchange value moved upward to $11.75 per pound U3O8, and the unrestricted value rose to $7.35. The UF6 market was quite active, with 8 deals and with restricted and unrestricted prices for UF6 both up ($34.75 and $22.50 per kgU as UF6 respectively). The restricted and unrestricted transaction values also rose to $10.05 and $7.25 respectively. Enrichment services followed the overall trend, with increases to $92 and $78 per SWU. Active uranium supply dropped, as did active demand.

  1. Evaluation of linear interpolation method for missing value on solar radiation dataset in Perlis

    SciTech Connect (OSTI)

    Saaban, Azizan; Zainudin, Lutfi; Bakar, Mohd Nazari Abu

    2015-05-15

    This paper intends to reveal the ability of the linear interpolation method to predict missing values in solar radiation time series. Reliable dataset is equally tends to complete time series observed dataset. The absence or presence of radiation data alters long-term variation of solar radiation measurement values. Based on that change, the opportunities to provide bias output result for modelling and the validation process is higher. The completeness of the observed variable dataset has significantly important for data analysis. Occurrence the lack of continual and unreliable time series solar radiation data widely spread and become the main problematic issue. However, the limited number of research quantity that has carried out to emphasize and gives full attention to estimate missing values in the solar radiation dataset.

  2. Value-based performance measures for Hanford Tank Waste Remedition System (TWRS) Program

    SciTech Connect (OSTI)

    Keeney, R.L.; von Winterfeldt, D.

    1996-01-01

    The Tank Waste Remediation Systems (TWRS) Program is responsible for the safe storage, retrieval, treatment, and preparation for disposal of high-level waste currently stored in underground storage tanks at the Hanford site in Richland. The TWRS program has adopted a logical approach to decision making that is based on systems engineering and decision analysis (Westinghouse Hanford Company, 1995). This approach involves the explicit consideration of stakeholder values and an evaluation of the TWRS alternatives in terms of these values. Such evaluations need to be consistent across decisions. Thus, an effort was undertaken to develop a consistent, quantifiable set of measures that can be used by TVVRS to assess alternatives against the stakeholder values. The measures developed also met two additional requirements: 1) the number of measure should be relatively small; and 2) performance with respect to the measures should be relatively easy to estimate.

  3. Representation of the Solar Capacity Value in the ReEDS Capacity Expansion Model: Preprint

    SciTech Connect (OSTI)

    Sigrin, B.; Sullivan, P.; Ibanez, E.; Margolis, R.

    2014-08-01

    An important emerging issue is the estimation of renewables' contributions to reliably meeting system demand, or their capacity value. While the capacity value of thermal generation can be estimated easily, assessment of wind and solar requires a more nuanced approach due to resource variability. Reliability-based methods, particularly, effective load-carrying capacity (ELCC), are considered to be the most robust techniques for addressing this resource variability. The Regional Energy Deployment System (ReEDS) capacity expansion model and other long-term electricity capacity planning models require an approach to estimating CV for generalized PV and system configurations with low computational and data requirements. In this paper we validate treatment of solar photovoltaic (PV) capacity value by ReEDS capacity expansion model by comparing model results to literature for a range of energy penetration levels. Results from the ReEDS model are found to compare well with both comparisons--despite not being resolved at an hourly scale.

  4. Study of behavior and determination of customer lifetime value(CLV) using Markov chain model

    SciTech Connect (OSTI)

    Permana, Dony; Indratno, Sapto Wahyu; Pasaribu, Udjianna S.

    2014-03-24

    Customer Lifetime Value or CLV is a restriction on interactive marketing to help a company in arranging financial for the marketing of new customer acquisition and customer retention. Additionally CLV can be able to segment customers for financial arrangements. Stochastic models for the fairly new CLV used a Markov chain. In this model customer retention probability and new customer acquisition probability play an important role. This model is originally introduced by Pfeifer and Carraway in 2000 [1]. They introduced several CLV models, one of them only involves customer and former customer. In this paper we expand the model by adding the assumption of the transition from former customer to customer. In the proposed model, the CLV value is higher than the CLV value obtained by Pfeifer and Caraway model. But our model still requires a longer convergence time.

  5. Impact of Different Economic Performance Metrics on the Perceived Value of Solar Photovoltaics

    SciTech Connect (OSTI)

    Drury, E.; Denholm, P.; Margolis, R.

    2011-10-01

    Photovoltaic (PV) systems are installed by several types of market participants, ranging from residential customers to large-scale project developers and utilities. Each type of market participant frequently uses a different economic performance metric to characterize PV value because they are looking for different types of returns from a PV investment. This report finds that different economic performance metrics frequently show different price thresholds for when a PV investment becomes profitable or attractive. Several project parameters, such as financing terms, can have a significant impact on some metrics [e.g., internal rate of return (IRR), net present value (NPV), and benefit-to-cost (B/C) ratio] while having a minimal impact on other metrics (e.g., simple payback time). As such, the choice of economic performance metric by different customer types can significantly shape each customer's perception of PV investment value and ultimately their adoption decision.

  6. ZERH Webinar: Sales and Value Recognition of Zero Energy Ready Homes |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy ZERH Webinar: Sales and Value Recognition of Zero Energy Ready Homes ZERH Webinar: Sales and Value Recognition of Zero Energy Ready Homes December 18, 2014 12:00PM to 1:15PM EST GoToWebinar The U.S. Department of Energy Zero Energy Ready Home (ZERH) Program represents a whole new level of home performance, with rigorous requirements that ensure outstanding levels of energy savings, comfort, health, and durability. Zero energy ready homes include critical systems that

  7. High Value Scrap Tire Recycle (Technical Report) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Technical Report: High Value Scrap Tire Recycle Citation Details In-Document Search Title: High Value Scrap Tire Recycle The objectives of this project were to further develop and scale-up a novel technology for reuse of scrap tire rubber, to identify and develop end uses for the technology (products), and to characterize the technology's energy savings and environmental impact. Authors: Bauman, B. D. Publication Date: 2003-02-01 OSTI Identifier: 895571 Report Number(s): DOE/CE/41035-1-FINAL

  8. Plug-In Hybrid Electric Vehicle Value Proposition Study: Interim Report: Phase I Scenario Evaluation

    SciTech Connect (OSTI)

    Sikes, Karen R; Markel, Lawrence C; Hadley, Stanton W; Hinds, Shaun; DeVault, Robert C

    2009-01-01

    Plug-in hybrid electric vehicles (PHEVs) offer significant improvements in fuel economy, convenient low-cost recharging capabilities, potential environmental benefits, and decreased reliance on imported petroleum. However, the cost associated with new components (e.g., advanced batteries) to be introduced in these vehicles will likely result in a price premium to the consumer. This study aims to overcome this market barrier by identifying and evaluating value propositions that will increase the qualitative value and/or decrease the overall cost of ownership relative to the competing conventional vehicles and hybrid electric vehicles (HEVs) of 2030 During this initial phase of this study, business scenarios were developed based on economic advantages that either increase the consumer value or reduce the consumer cost of PHEVs to assure a sustainable market that can thrive without the aid of state and Federal incentives or subsidies. Once the characteristics of a thriving PHEV market have been defined for this timeframe, market introduction steps, such as supportive policies, regulations and temporary incentives, needed to reach this level of sustainability will be determined. PHEVs have gained interest over the past decade for several reasons, including their high fuel economy, convenient low-cost recharging capabilities, potential environmental benefits and reduced use of imported petroleum, potentially contributing to President Bush's goal of a 20% reduction in gasoline use in ten years, or 'Twenty in Ten'. PHEVs and energy storage from advanced batteries have also been suggested as enabling technologies to improve the reliability and efficiency of the electric power grid. However, PHEVs will likely cost significantly more to purchase than conventional or other hybrid electric vehicles (HEVs), in large part because of the cost of batteries. Despite the potential long-term savings to consumers and value to stakeholders, the initial cost of PHEVs presents a major market barrier to their widespread commercialization. The purpose of this project is to identify and evaluate value-added propositions for PHEVs that will help overcome this market barrier. Candidate value propositions for the initial case study were chosen to enhance consumer acceptance of PHEVs and/or compatibility with the grid. Potential benefits of such grid-connected vehicles include the ability to supply peak load or emergency power requirements of the grid, enabling utilities to size their generation capacity and contingency resources at levels below peak. Different models for vehicle/battery ownership, leasing, financing and operation, as well as the grid, communications, and vehicle infrastructure needed to support the proposed value-added functions were explored during Phase 1. Rigorous power system, vehicle, financial and emissions modeling were utilized to help identify the most promising value propositions and market niches to focus PHEV deployment initiatives.

  9. WORKSHOP: HIGH VALUE ROLL TO ROLL (HV R2R) MANUFACTURING INNOVATION,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DECEMBER 2-3, 2015 | Department of Energy HIGH VALUE ROLL TO ROLL (HV R2R) MANUFACTURING INNOVATION, DECEMBER 2-3, 2015 WORKSHOP: HIGH VALUE ROLL TO ROLL (HV R2R) MANUFACTURING INNOVATION, DECEMBER 2-3, 2015 December 2-3, 2015 in Alexandria, VA. The Advanced Manufacturing Office (AMO) hosted a workshop in Alexandria, VA at the Westin Alexandria Hotel on 2-3 December, 2015. This 2 day workshop focused on the advanced manufacturing technology topic of HV R2R. Discussion topics included

  10. Save Energy, Cut Costs, and Bring a Different Kind of Value to Work |

    Energy Savers [EERE]

    Department of Energy Energy, Cut Costs, and Bring a Different Kind of Value to Work Save Energy, Cut Costs, and Bring a Different Kind of Value to Work June 1, 2010 - 7:30am Addthis Amy Foster Parish For many of us, thinking about energy efficiency means thinking about changes we can make at home. But residential energy efficiency is just one slice of the energy use pie. According to data from the Energy Information Administration, energy use in the residential and commercial sectors is neck

  11. Level: National and Regional Data; Row: Values of Shipments and Employment Sizes

    U.S. Energy Information Administration (EIA) Indexed Site

    1.3 First Use of Energy for All Purposes (Fuel and Nonfuel), 2006; Level: National and Regional Data; Row: Values of Shipments and Employment Sizes Column: Energy Sources and Shipments; Unit: Trillion Btu. Shipments Economic Net Residual Distillate LPG and Coke and of Energy Sources Characteristic(a) Total(b) Electricity(c) Fuel Oil Fuel Oil(d) Natural Gas(e) NGL(f) Coal Breeze Other(g) Produced Onsite(h) Total United States Value of Shipments and Receipts (million dollars) Under 20 1,166 367 23

  12. Level: National and Regional Data; Row: Values of Shipments and Employment Sizes

    U.S. Energy Information Administration (EIA) Indexed Site

    2.3 Nonfuel (Feedstock) Use of Combustible Energy, 2006; Level: National and Regional Data; Row: Values of Shipments and Employment Sizes Column: Energy Sources Unit: Trillion Btu Economic Residual Distillate LPG and Coke and Characteristic(a) Total Fuel Oil Fuel Oil(b) Natural Gas(c) NGL(d) Coal Breeze Other(e) Total United States Value of Shipments and Receipts (million dollars) Under 20 47 0 3 5 Q 20 1 17 20-49 112 7 Q 20 1 12 1 64 50-99 247 29 Q 26 88 33 * 68 100-249 313 28 1 97 12 48 43 85

  13. Level: National and Regional Data; Row: Values of Shipments and Employment Sizes;

    U.S. Energy Information Administration (EIA) Indexed Site

    2 Electricity: Components of Net Demand, 2006; Level: National and Regional Data; Row: Values of Shipments and Employment Sizes; Column: Electricity Components; Unit: Million Kilowatthours. Sales and Net Demand Economic Total Onsite Transfers for Characteristic(a) Purchases Transfers In(b) Generation(c) Offsite Electricity(d) Total United States Value of Shipments and Receipts (million dollars) Under 20 107,618 56 1,447 28 109,094 20-49 97,570 181 5,220 307 102,664 50-99 104,082 Q 3,784 2,218

  14. Level: National and Regional Data; Row: Values of Shipments and Employment Sizes;

    U.S. Energy Information Administration (EIA) Indexed Site

    4 Electricity: Components of Onsite Generation, 2006; Level: National and Regional Data; Row: Values of Shipments and Employment Sizes; Column: Onsite-Generation Components; Unit: Million Kilowatthours. Renewable Energy (excluding Wood Economic Total Onsite and Characteristic(a) Generation Cogeneration(b) Other Biomass)(c) Other(d) Total United States Value of Shipments and Receipts (million dollars) Under 20 1,447 450 Q Q 20-49 5,220 5,106 29 Q 50-99 3,784 3,579 29 Q 100-249 17,821 17,115 484

  15. Level: National and Regional Data; Row: Values of Shipments and Employment Sizes;

    U.S. Energy Information Administration (EIA) Indexed Site

    6 Electricity: Sales to Utility and Nonutility Purchasers, 2006; Level: National and Regional Data; Row: Values of Shipments and Employment Sizes; Column: Utility and Nonutility Purchasers; Unit: Million Kilowatthours. Total of Economic Sales and Utility Nonutility Characteristic(a) Transfers Offsite Purchaser(b) Purchaser(c) Total United States Value of Shipments and Receipts (million dollars) Under 20 28 28 0 20-49 307 227 80 50-99 2,218 1,673 545 100-249 2,647 1,437 1,210 250-499 3,736 2,271

  16. Level: National and Regional Data; Row: Values of Shipments and Employment Sizes;

    U.S. Energy Information Administration (EIA) Indexed Site

    3.3 Fuel Consumption, 2006; Level: National and Regional Data; Row: Values of Shipments and Employment Sizes; Column: Energy Sources; Unit: Trillion Btu. Economic Net Residual Distillate LPG and Coke and Characteristic(a) Total Electricity(b) Fuel Oil Fuel Oil(c) Natural Gas(d) NGL(e) Coal Breeze Other(f) Total United States Value of Shipments and Receipts (million dollars) Under 20 1,139 367 23 45 535 14 21 3 131 20-49 1,122 333 13 19 530 8 93 5 122 50-99 1,309 349 22 17 549 10 157 8 197

  17. Level: National and Regional Data; Row: Values of Shipments and Employment Sizes;

    U.S. Energy Information Administration (EIA) Indexed Site

    4.3 Offsite-Produced Fuel Consumption, 2006; Level: National and Regional Data; Row: Values of Shipments and Employment Sizes; Column: Energy Sources; Unit: Trillion Btu. Economic Residual Distillate Natural LPG and Coke and Characteristic(a) Total Electricity(b) Fuel Oil Fuel Oil(c) Gas(d) NGL(e) Coal Breeze Other(f) Total United States Value of Shipments and Receipts (million dollars) Under 20 1,066 367 23 45 535 13 21 3 59 20-49 1,063 334 13 18 530 8 93 5 63 50-99 1,233 357 22 16 549 10 157 8

  18. Simulating the Value of Concentrating Solar Power with Thermal Energy Storage in a Production Cost Model

    SciTech Connect (OSTI)

    Denholm, P.; Hummon, M.

    2012-11-01

    Concentrating solar power (CSP) deployed with thermal energy storage (TES) provides a dispatchable source of renewable energy. The value of CSP with TES, as with other potential generation resources, needs to be established using traditional utility planning tools. Production cost models, which simulate the operation of grid, are often used to estimate the operational value of different generation mixes. CSP with TES has historically had limited analysis in commercial production simulations. This document describes the implementation of CSP with TES in a commercial production cost model. It also describes the simulation of grid operations with CSP in a test system consisting of two balancing areas located primarily in Colorado.

  19. First-Ever Energy Open Data Roundtable Catalyzes Value of Big Data

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Revolution for Energy Sector | Department of Energy First-Ever Energy Open Data Roundtable Catalyzes Value of Big Data Revolution for Energy Sector First-Ever Energy Open Data Roundtable Catalyzes Value of Big Data Revolution for Energy Sector May 1, 2015 - 3:10pm Addthis Jon Weers (left), Debbie Brodt-Giles (center), and Kristen Honey were among the 16 recipients of Energy Innovation Awards at the networking breakfast before the first-ever Energy Open Data Roundtable on April 29 in

  20. Value of Improved Wind Power Forecasting in the Western Interconnection (Poster)

    SciTech Connect (OSTI)

    Hodge, B.

    2013-12-01

    Wind power forecasting is a necessary and important technology for incorporating wind power into the unit commitment and dispatch process. It is expected to become increasingly important with higher renewable energy penetration rates and progress toward the smart grid. There is consensus that wind power forecasting can help utility operations with increasing wind power penetration; however, there is far from a consensus about the economic value of improved forecasts. This work explores the value of improved wind power forecasting in the Western Interconnection of the United States.

  1. ORISE: The Value of Independence, a white paper on DOE Order 458.1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Value of Independence ORISE white paper explains how DOE Order 458.1 brings independent verification to the forefront of D&D projects With the release of DOE Order 458.1 in February 2011, the U.S. Department of Energy has made independent verification an official requirement for contractors involved in decontamination and decommissioning (D&D) projects at former nuclear sites operated by DOE. In the white paper The Value of Independence (PDF, 500KB), ORISE provides more background on

  2. Average and effective Q-values for fission product average (n,2n) and

    Office of Scientific and Technical Information (OSTI)

    (n,3n) reaction cross sections (Technical Report) | SciTech Connect Technical Report: Average and effective Q-values for fission product average (n,2n) and (n,3n) reaction cross sections Citation Details In-Document Search Title: Average and effective Q-values for fission product average (n,2n) and (n,3n) reaction cross sections Authors: Kawano, Toshihiko [1] + Show Author Affiliations Los Alamos National Laboratory (LANL), Los Alamos, NM (United States) Publication Date: 2015-10-01 OSTI

  3. Capacity Value: Evaluation of WECC Rule of Thumb (Presentation), NREL (National Renewable Energy Laboratory)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Capacity Value: Evaluation of WECC Rule of Thumb WECC Data Working Group Michael Milligan, Ph.D. Eduardo Ibanez, Ph.D. Western Electricity Coordinating Council Webinar June 9, 2015 NREL/PR-5D00-64879 2 Objective * Compare LOLE, wind/solar capacity values with 'rules of thumb' used in Western Interconnection Planning * Provide alternative recommendations to WECC's TEPPC modeling efforts 3 ELCC: Measure Contribution of Generator to Resource Adequacy 0.06 0.07 0.08 0.09 0.1 0.11 0.12 8 8.5 9 9.5 10

  4. THE VALUE OF ECONOMIC DISPATCH A REPORT TO CONGRESS PURSUANT TO SECTION

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1234 OF THE ENERGY POLICY ACT OF 2005 | Department of Energy THE VALUE OF ECONOMIC DISPATCH A REPORT TO CONGRESS PURSUANT TO SECTION 1234 OF THE ENERGY POLICY ACT OF 2005 THE VALUE OF ECONOMIC DISPATCH A REPORT TO CONGRESS PURSUANT TO SECTION 1234 OF THE ENERGY POLICY ACT OF 2005 EPAct requires the Secretary of Energy to submit a report on economic dispatch to Congress and the states no later than 90 days following enactment of the act and annually thereafter. The study is to include any

  5. Fuel NOx production during the combustion of low caloric value fuel

    SciTech Connect (OSTI)

    Colaluca, M.A.; Caraway, J.P.

    1997-07-01

    The objective of this investigation is to identify and qualify physical mechanisms and parameters that affect the combustion of low caloric value gases (LCVG) and the formation of NOx pollutants produced form fuel bound nitrogen. Average physical properties of a low caloric value gas were determined from the products of several industrial coal gasifiers. A computer model was developed, utilizing the PHOENICS computational fluid dynamics software to model the combustion of LCVG. The model incorporates a 3-dimensional physical design and is based on typical industrial combustors. Feed stock to the gasifier can be wood, feed stock manure, cotton gin trash, coal, lignite and numerous forms of organic industrial wastes.

  6. Method for increasing the calorific value of gas produced by the in situ combustion of coal

    DOE Patents [OSTI]

    Shuck, Lowell Z.

    1978-01-01

    The present invention relates to the production of relatively high Btu gas by the in situ combustion of subterranean coal. The coal bed is penetrated with a horizontally-extending borehole and combustion is initiated in the coal bed contiguous to the borehole. The absolute pressure within the resulting combustion zone is then regulated at a desired value near the pore pressure within the coal bed so that selected quantities of water naturally present in the coal will flow into the combustion zone to effect a hydrogen and carbon monoxide-producing steam-carbon reaction with the hot carbon in the combustion zone for increasing the calorific value of the product gas.

  7. An assessment of the net value of CSP systems integrated with thermal energy storage

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Mehos, M.; Jorgenson, J.; Denholm, P.; Turchi, C.

    2015-05-01

    Within this study, we evaluate the operational and capacity value—or total system value—for multiple concentrating solar power (CSP) plant configurations under an assumed 33% renewable penetration scenario in California. We calculate the first-year bid price for two CSP plants, including a 2013 molten-salt tower integrated with a conventional Rankine cycle and a hypothetical 2020 molten-salt tower system integrated with an advanced supercritical carbon-dioxide power block. The overall benefit to the regional grid, defined in this study as the net value, is calculated by subtracting the first-year bid price from the total system value.

  8. Threshold Values for Identification of Contamination Predicted by Reduced-Order Models

    SciTech Connect (OSTI)

    Last, George V.; Murray, Christopher J.; Bott, Yi-Ju; Brown, Christopher F.

    2014-12-31

    The U.S. Department of Energys (DOEs) National Risk Assessment Partnership (NRAP) Project is developing reduced-order models to evaluate potential impacts on underground sources of drinking water (USDWs) if CO2 or brine leaks from deep CO2 storage reservoirs. Threshold values, below which there would be no predicted impacts, were determined for portions of two aquifer systems. These threshold values were calculated using an interwell approach for determining background groundwater concentrations that is an adaptation of methods described in the U.S. Environmental Protection Agencys Unified Guidance for Statistical Analysis of Groundwater Monitoring Data at RCRA Facilities.

  9. Cray C/C++ predefined _RELEASE macro returns wrong value [updated]

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Reports » Cray C/C++ predefined _RELEASE macro returns wrong value [updated] Cray C/C++ predefined _RELEASE macro returns wrong value [updated] November 18, 2013 by Mike Stewart, NERSC USG Status: Reported to Cray as bug 797442, became documentation bug 805340. Updated October 14, 2014 by Scott French, NERSC USG According to the Sept, 2013, version of the Cray C/C++ manual at docs.cray.com, Chapter 10, "Using Predefined Macros": Macro Description _RELEASE Defined as the major release

  10. Method and apparatus for real-time measurement of fuel gas compositions and heating values

    DOE Patents [OSTI]

    Zelepouga, Serguei; Pratapas, John M.; Saveliev, Alexei V.; Jangale, Vilas V.

    2016-03-22

    An exemplary embodiment can be an apparatus for real-time, in situ measurement of gas compositions and heating values. The apparatus includes a near infrared sensor for measuring concentrations of hydrocarbons and carbon dioxide, a mid infrared sensor for measuring concentrations of carbon monoxide and a semiconductor based sensor for measuring concentrations of hydrogen gas. A data processor having a computer program for reducing the effects of cross-sensitivities of the sensors to components other than target components of the sensors is also included. Also provided are corresponding or associated methods for real-time, in situ determination of a composition and heating value of a fuel gas.

  11. EERE Success Story-Texas: City of San Antonio Demonstrates Value of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Greater Investments in Clean Energy | Department of Energy Texas: City of San Antonio Demonstrates Value of Greater Investments in Clean Energy EERE Success Story-Texas: City of San Antonio Demonstrates Value of Greater Investments in Clean Energy August 21, 2013 - 12:00am Addthis The City of San Antonio has a sound strategy in place to ensure that their Energy Efficiency and Conservation Block Grant (EECBG) projects are successful and viable in the long term. Each project was designed to

  12. Threshold Values for Identification of Contamination Predicted by Reduced-Order Models

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Last, George V.; Murray, Christopher J.; Bott, Yi-Ju; Brown, Christopher F.

    2014-12-31

    The U.S. Department of Energy’s (DOE’s) National Risk Assessment Partnership (NRAP) Project is developing reduced-order models to evaluate potential impacts on underground sources of drinking water (USDWs) if CO2 or brine leaks from deep CO2 storage reservoirs. Threshold values, below which there would be no predicted impacts, were determined for portions of two aquifer systems. These threshold values were calculated using an interwell approach for determining background groundwater concentrations that is an adaptation of methods described in the U.S. Environmental Protection Agency’s Unified Guidance for Statistical Analysis of Groundwater Monitoring Data at RCRA Facilities.

  13. Update on R-Value Measurements @ NCERC (Conference) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Update on R-Value Measurements @ NCERC Citation Details In-Document Search Title: Update on R-Value Measurements @ NCERC No abstract prepared. Authors: Bredeweg, Todd Allen [1] + Show Author Affiliations Los Alamos National Laboratory Publication Date: 2012-07-11 OSTI Identifier: 1045992 Report Number(s): LA-UR-12-22840 TRN: US1203893 DOE Contract Number: AC52-06NA25396 Resource Type: Conference Resource Relation: Conference: NCNS F2012 Quarterly NP/PR Review ; 2012-07-11 - 2012-07-12 ;

  14. A Spin on Technology: Extracting Value from Wasted Heat | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy A Spin on Technology: Extracting Value from Wasted Heat A Spin on Technology: Extracting Value from Wasted Heat November 12, 2010 - 2:12pm Addthis Ener-G-Rotors has developed a system that converts hot water and steam into electricity. | File photo Ener-G-Rotors has developed a system that converts hot water and steam into electricity. | File photo Joshua DeLung What are the key facts? This new system allows manufacturers to convert heated wastewater and steam to energy. $834,000

  15. Implementation of the singular-value decomposition on the Connection Machine CM-2

    SciTech Connect (OSTI)

    Chu, N.A.

    1991-04-11

    In modern digital signal processing, the singular value decomposition is increasingly recognized as an important mathematical tool. The true measure of usefulness of such a tool is very much dependent on the ability to compute it at supercomputer throughput rates. This report describes an implementation of the singular value decomposition (SVD) on the Connection Machine CM-2 using parallel Fortran. The algorithm is based on Hestenes's, which is a Jacobi iteration in which pairs of rows are rotated to become orthogonal. The Fortran implementation of this algorithm on a full CM-2 is comparable in execution speed to the Linpack implementation on a Convex C220 processor.

  16. Process for the production and recovery of fuel values from coal

    DOE Patents [OSTI]

    Sass, Allan; McCarthy, Harry E.; Kaufman, Paul R.; Finney, Clement S.

    1982-01-01

    A method of pyrolyzing and desulfurizing coal in a transport reactor to recover volatile fuel values and hydrogen by heating particulate coal entrained in a carrier gas substantially free of oxygen to a pyrolysis temperature in a zone within three seconds.

  17. Method for data compression by associating complex numbers with files of data values

    DOE Patents [OSTI]

    Feo, John Thomas; Hanks, David Carlton; Kraay, Thomas Arthur

    1998-02-10

    A method for compressing data for storage or transmission. Given a complex polynomial and a value assigned to each root, a root generated data file (RGDF) is created, one entry at a time. Each entry is mapped to a point in a complex plane. An iterative root finding technique is used to map the coordinates of the point to the coordinates of one of the roots of the polynomial. The value associated with that root is assigned to the entry. An equational data compression (EDC) method reverses this procedure. Given a target data file, the EDC method uses a search algorithm to calculate a set of m complex numbers and a value map that will generate the target data file. The error between a simple target data file and generated data file is typically less than 10%. Data files can be transmitted or stored without loss by transmitting the m complex numbers, their associated values, and an error file whose size is at most one-tenth of the size of the input data file.

  18. Method for data compression by associating complex numbers with files of data values

    DOE Patents [OSTI]

    Feo, J.T.; Hanks, D.C.; Kraay, T.A.

    1998-02-10

    A method for compressing data for storage or transmission is disclosed. Given a complex polynomial and a value assigned to each root, a root generated data file (RGDF) is created, one entry at a time. Each entry is mapped to a point in a complex plane. An iterative root finding technique is used to map the coordinates of the point to the coordinates of one of the roots of the polynomial. The value associated with that root is assigned to the entry. An equational data compression (EDC) method reverses this procedure. Given a target data file, the EDC method uses a search algorithm to calculate a set of m complex numbers and a value map that will generate the target data file. The error between a simple target data file and generated data file is typically less than 10%. Data files can be transmitted or stored without loss by transmitting the m complex numbers, their associated values, and an error file whose size is at most one-tenth of the size of the input data file. 4 figs.

  19. G-Band Vapor Radiometer Precipitable Water Vapor (GVRPWV) Value-Added Product

    SciTech Connect (OSTI)

    Koontz, A; Cadeddu, M

    2012-12-05

    The G-Band Vapor Radiometer Precipitable Water Vapor (GVRPWV) value-added product (VAP) computes precipitable water vapor using neural network techniques from data measured by the GVR. The GVR reports time-series measurements of brightness temperatures for four channels located at 183.3 ± 1, 3, 7, and 14 GHz.

  20. Best Estimate Radiation Flux Value-Added Procedure: Algorithm Operational Details and Explanations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 Best Estimate Radiation Flux Value-Added Procedure: Algorithm Operational Details and Explanations October 2002 Y. Shi and C. N. Long DOE, ARM, Pacific Northwest National Laboratory Richland, Washington Work supported by the U.S. Department of Energy, Office of Energy Research, Office of Health and Environmental Research Contents 1. Introduction ............................................................................................................................................ 1 2.

  1. Capacity Value: Evaluation of WECC Rule of Thumb; NREL (National Renewable Energy Laboratory)

    SciTech Connect (OSTI)

    Milligan, Michael; Ibanez, Eduardo

    2015-06-09

    This presentation compares loss of load expectation and wind and solar capacity values to the rules of thumb used in the Western Interconnection planning and provides alternative recommendations to the modeling efforts of the Western Electricity Coordinating Council's Transmission Expansion Planning Policy Committee.

  2. Quantifying the Value of Hydropower in the Electric Grid. Final Report

    SciTech Connect (OSTI)

    Key, T.

    2013-02-01

    The report summarizes a 3-year DOE study focused on defining value of hydropower assets in a changing electric grid. The study looked at existing large hydropower operations in the U.S., models for different electricity futures, markets, costs of existing and new technologies as well as trends related to hydropower investments in other parts of the world.

  3. Hazard perception and the economic impact of internment on residential land values

    SciTech Connect (OSTI)

    Merz, J.F.

    1983-04-01

    The potential for large scale natural and man-made hazards exists in the form of hurricanes, earthquakes, volcanoes, floods, dams, accidents involving poisonous, explosive or radioactive materials, and severe pollution or waste disposal mishaps. Regions prone to natural hazards and areas located proximally to technological hazards may be subject to economic losses from low probability-high consequence events. Economic costs may be incurred in: evacuation and relocation of inhabitants; personal, industrial, agricultural, and tax revenue losses; decontamination; property damage or loss of value; and temporary or prolonged internment of land. The value of land in an area subjected to a low probability-high consequence event may decrease, reflecting, a fortiori, a reluctance to continue living in the area or to repopulate a region which had required internment. The future value of such land may be described as a function of location, time, interdiction period (if applicable), and variables reflecting the magnitude of the perceived hazard. This paper presents a study of these variables and proposes a model for land value estimation. As an example, the application of the model to the Love Canal area in Niagara Falls, New York is presented.

  4. Extended space expectation values of position related operators for hydrogen-like quantum system evolutions

    SciTech Connect (OSTI)

    Kalay, Berfin; Demiralp, Metin

    2014-10-06

    The expectation value definitions over an extended space from the considered Hilbert space of the system under consideration is given in another paper of the second author in this symposium. There, in that paper, the conceptuality rather than specification is emphasized on. This work uses that conceptuality to investigate the time evolutions of the position related operators' expectation values not in its standard meaning but rather in a new version of the definition over not the original Hilbert space but in the space obtained by extensions via introducing the images of the given initial wave packet under the positive integer powers of the system Hamiltonian. These images may not be residing in the same space of the initial wave packet when certain singularities appear in the structure of the system Hamiltonian. This may break down the existence of the integrals in the definitions of the expectation values. The cure is the use of basis functions in the abovementioned extended space and the sandwiching of the target operator whose expectation value is under questioning by an appropriately chosen operator guaranteeing the existence of the relevant integrals. Work specifically focuses on the hydrogen-like quantum systems whose Hamiltonians contain a polar singularity at the origin.

  5. "NAICS",,"per Employee","of Value Added","of Shipments" "Code...

    U.S. Energy Information Administration (EIA) Indexed Site

    Receipts" ,"(million dollars)" ," Under 20",3,3,3 ," 20-49",5,5,4 ," 50-99",6,5,4 ," 100-249",5,5,4 ," 250-499",7,9,7 ," 500 and Over",3,2,2 ,"Total",2,2,2 311,"FOOD" ,"Value of ...

  6. Studies Show No Evidence of Impacts from Wind on Residential Property Values

    Broader source: Energy.gov [DOE]

    DOE's Lawrence Berkeley National Laboratory and the University of Connecticut analyzed more than 122,000 home sales near 26 wind facilities (more than 1,500 of which were located within a mile of operating turbines) in the densely populated State of Massachusetts but found no evidence of impacts to nearby home property values.

  7. Estimated Value of Service Reliability for Electric Utility Customers in the United States

    SciTech Connect (OSTI)

    Sullivan, M.J.; Mercurio, Matthew; Schellenberg, Josh

    2009-06-01

    Information on the value of reliable electricity service can be used to assess the economic efficiency of investments in generation, transmission and distribution systems, to strategically target investments to customer segments that receive the most benefit from system improvements, and to numerically quantify the risk associated with different operating, planning and investment strategies. This paper summarizes research designed to provide estimates of the value of service reliability for electricity customers in the US. These estimates were obtained by analyzing the results from 28 customer value of service reliability studies conducted by 10 major US electric utilities over the 16 year period from 1989 to 2005. Because these studies used nearly identical interruption cost estimation or willingness-to-pay/accept methods it was possible to integrate their results into a single meta-database describing the value of electric service reliability observed in all of them. Once the datasets from the various studies were combined, a two-part regression model was used to estimate customer damage functions that can be generally applied to calculate customer interruption costs per event by season, time of day, day of week, and geographical regions within the US for industrial, commercial, and residential customers. Estimated interruption costs for different types of customers and of different duration are provided. Finally, additional research and development designed to expand the usefulness of this powerful database and analysis are suggested.

  8. Value of information analysis for corrective action unit No. 98: Frenchman Flat

    SciTech Connect (OSTI)

    NONE

    1997-06-01

    A value of information analysis has been completed as part of the corrective action process for Frenchman Flat, the first Nevada Test Site underground test area to be scheduled for the corrective action process. A value of information analysis is a cost-benefit analysis applied to the acquisition of new information which is needed to reduce the uncertainty in the prediction of a contaminant boundary surrounding underground nuclear tests in Frenchman Flat. The boundary location will be established to protect human health and the environment from the consequences of using contaminated groundwater on the Nevada Test Site. Uncertainties in the boundary predictions are assumed to be the result of data gaps. The value of information analysis in this document compares the cost of acquiring new information with the benefit of acquiring that information during the corrective action investigation at Frenchman Flat. Methodologies incorporated into the value of information analysis include previous geological modeling, groundwater flow modeling, contaminant transport modeling, statistics, sensitivity analysis, uncertainty analysis, and decision analysis.

  9. A procedure to determine the planar integral spot dose values of proton pencil beam spots

    SciTech Connect (OSTI)

    Anand, Aman; Sahoo, Narayan; Zhu, X. Ronald; Sawakuchi, Gabriel O.; Poenisch, Falk; Amos, Richard A.; Ciangaru, George; Titt, Uwe; Suzuki, Kazumichi; Mohan, Radhe; Gillin, Michael T.

    2012-02-15

    Purpose: Planar integral spot dose (PISD) of proton pencil beam spots (PPBSs) is a required input parameter for beam modeling in some treatment planning systems used in proton therapy clinics. The measurement of PISD by using commercially available large area ionization chambers, like the PTW Bragg peak chamber (BPC), can have large uncertainties due to the size limitation of these chambers. This paper reports the results of our study of a novel method to determine PISD values from the measured lateral dose profiles and peak dose of the PPBS. Methods: The PISDs of 72.5, 89.6, 146.9, 181.1, and 221.8 MeV energy PPBSs were determined by area integration of their planar dose distributions at different depths in water. The lateral relative dose profiles of the PPBSs at selected depths were measured by using small volume ion chambers and were investigated for their angular anisotropies using Kodak XV films. The peak spot dose along the beam's central axis (D{sub 0}) was determined by placing a small volume ion chamber at the center of a broad field created by the superposition of spots at different locations. This method allows eliminating positioning uncertainties and the detector size effect that could occur when measuring it in single PPBS. The PISD was then calculated by integrating the measured lateral relative dose profiles for two different upper limits of integration and then multiplying it with corresponding D{sub 0}. The first limit of integration was set to radius of the BPC, namely 4.08 cm, giving PISD{sub RBPC}. The second limit was set to a value of the radial distance where the profile dose falls below 0.1% of the peak giving the PISD{sub full}. The calculated values of PISD{sub RBPC} obtained from area integration method were compared with the BPC measured values. Long tail dose correction factors (LTDCFs) were determined from the ratio of PISD{sub full}/PISD{sub RBPC} at different depths for PPBSs of different energies. Results: The spot profiles were found to have angular anisotropy. This anisotropy in PPBS dose distribution could be accounted in a reasonable approximate manner by taking the average of PISD values obtained using the in-line and cross-line profiles. The PISD{sub RBPC} values fall within 3.5% of those measured by BPC. Due to inherent dosimetry challenges associated with PPBS dosimetry, which can lead to large experimental uncertainties, such an agreement is considered to be satisfactory for validation purposes. The PISD{sub full} values show differences ranging from 1 to 11% from BPC measured values, which are mainly due to the size limitation of the BPC to account for the dose in the long tail regions of the spots extending beyond its 4.08 cm radius. The dose in long tail regions occur both for high energy beams such as 221.8 MeV PPBS due to the contributions of nuclear interactions products in the medium, and for low energy PPBS because of their larger spot sizes. The calculated LTDCF values agree within 1% with those determined by the Monte Carlo (MC) simulations. Conclusions: The area integration method to compute the PISD from PPBS lateral dose profiles is found to be useful both to determine the correction factors for the values measured by the BPC and to validate the results from MC simulations.

  10. I/O values for determination of the origin of some indoor organic pollutants

    SciTech Connect (OSTI)

    Otson, R.; Zhu, J.

    1997-12-31

    To reduce human health risks resulting from exposure to toxic chemicals, it is important to determine the origin of such substances. The ratio (I/O) of indoor to outdoor concentrations of selected airborne vapor phase organic compounds (VPOC) was used to estimate the contribution of indoor sources to levels of the compounds in the air of 44 homes selected randomly in the Greater Toronto Area (GTA). Average I/O values for all of the homes were greater 1.5 for 10 of the 20 detected target compounds, and it could be concluded that indoor VPOC sources had a greater impact on indoor air quality than outdoor air in these instances. A significant finding, which aptly demonstrates the importance of indoor sources and pollution, was the overall I/O value of 5.2 for the 44 representative GTA homes. Possible indoor sources for most of the 10 compounds could be identified, based on information collected by means of a questionnaire, as well as from the scientific literature. However, possible sources for some compounds could not be determined as readily, probably because of the presence of multiple sources, and sources which had not been previously noted, such as foods and beverages. The sensitivity of I/O values to various factors (e.g., source strength, air exchange rates, precision of measurements, unanticipated sources), and the reliability of determining the origin of pollutants by use of I/O values alone were examined, with some examples. If used judiciously, the I/O value can be a useful tool for IAQ investigations.

  11. Impact of Wind and Solar on the Value of Energy Storage

    SciTech Connect (OSTI)

    Denholm, P.; Jorgenson, J.; Hummon, M.; Palchak, D.; Kirby, B.; Ma, O.; O'Malley, M.

    2013-11-01

    This analysis evaluates how the value of energy storage changes when adding variable generation (VG) renewable energy resources to the grid. A series of VG energy penetration scenarios from 16% to 55% were generated for a utility system in the western United States. This operational value of storage (measured by its ability to reduce system production costs) was estimated in each VG scenario, considering provision of different services and with several sensitivities to fuel price and generation mix. Overall, the results found that the presence of VG increases the value of energy storage by lowering off-peak energy prices more than on-peak prices, leading to a greater opportunity to arbitrage this price difference. However, significant charging from renewables, and consequently a net reduction in carbon emissions, did not occur until VG penetration was in the range of 40%-50%. Increased penetration of VG also increases the potential value of storage when providing reserves, mainly by increasing the amount of reserves required by the system. Despite this increase in value, storage may face challenges in capturing the full benefits it provides. Due to suppression of on-/off-peak price differentials, reserve prices, and incomplete capture of certain system benefits (such as the cost of power plant starts), the revenue obtained by storage in a market setting appears to be substantially less than the net benefit (reduction in production costs) provided to the system. Furthermore, it is unclear how storage will actually incentivize large-scale deployment of renewables needed to substantially increase VG penetration. This demonstrates some of the additional challenges for storage deployed in restructured energy markets.

  12. The Impact of Wind Power Projects on Residential Property Values in the United States: A Multi-Site Hedonic Analysis

    SciTech Connect (OSTI)

    Hoen, Ben; Wiser, Ryan; Cappers, Peter; Thayer, Mark; Sethi, Gautam

    2009-12-01

    This report uses statistical analysis to evaluate the impact of wind power projects on property values, and fails to uncovers conclusive evidence of the existence of any widespread property value impacts.

  13. U.S. Imputed Value of Natural Gas Market Production (Cost)

    U.S. Energy Information Administration (EIA) Indexed Site

    Imputed Value of Natural Gas Market Production (Cost) U.S. Imputed Value of Natural Gas Market Production (Cost) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 30,524,691 1990's 31,754,803 30,327,779 32,570,827 38,810,612 36,535,940 30,285,862 42,951,353 46,131,323 39,085,318 43,324,690 2000's 74,338,958 82,202,805 58,596,868 97,555,375 106,521,974 138,750,746 124,074,399 - = No Data Reported; -- = Not Applicable; NA = Not Available; W = Withheld to avoid

  14. The value of windpower: An investigation using a qualified production cost model

    SciTech Connect (OSTI)

    Milligan, M.R.; Miller, A.H.

    1993-07-01

    As part of the US Department of Energy`s Wind Energy Program at the National Renewable Energy Laboratory, we are using the Environmental Defense Fund`s Electric Utility Financial & Production Cost Model (Elfin) as a tool to determine the value of wind energy to specific utilities. The cases we have developed exercise a number of options in the way in which wind energy is treated: (1) as a load modifer (negative load); (2) as a quick-start supply-side resource with hourly varying output; and (3) probabilistically, using time-varying Weibull distributions. By using two wind speed distributions, two different wind turbines, and two different utilities, we show what the wind turbine cost/kW might be that results in a positive value of wind energy for these utilities.

  15. Recommended Parameter Values for GENII Modeling of Radionuclides in Routine Air and Water Releases

    SciTech Connect (OSTI)

    Snyder, Sandra F.; Arimescu, Carmen; Napier, Bruce A.; Hay, Tristan R.

    2012-11-01

    The GENII v2 code is used to estimate dose to individuals or populations from the release of radioactive materials into air or water. Numerous parameter values are required for input into this code. User-defined parameters cover the spectrum from chemical data, meteorological data, agricultural data, and behavioral data. This document is a summary of parameter values that reflect conditions in the United States. Reasonable regional and age-dependent data is summarized. Data availability and quality varies. The set of parameters described address scenarios for chronic air emissions or chronic releases to public waterways. Considerations for the special tritium and carbon-14 models are briefly addressed. GENIIv2.10.0 is the current software version that this document supports.

  16. Value engineering study final report on -- Spallation Neutron Source, Oak Ridge, Tennessee

    SciTech Connect (OSTI)

    1999-01-31

    The SNS Project has had numerous DOE/SC reviews to validate the technical baseline, management approach, cost, schedule, and Conceptual Design Report. As a result, in FY 1999 the SNS received $130 million and approval from Congress to initiate Title 1 design and construction activities. Since this funding was less than requested for FY 1999 ($157 million) and validated in previous reviews, and because of improved costing information, the SNS Project team will reassess the cost and schedule baselines in an upcoming DOE review in January 1999. In preparation for this reassessment, the SNS has initiated a value engineering process to improve the design and to recover cost and contingency. Value engineering will continue throughout the life of the project, but the results described in this report are our initial efforts.

  17. Added Value of Reliability to a Microgrid: Simulations of Three California Buildings

    SciTech Connect (OSTI)

    Marnay, Chris; Lai, Judy; Stadler, Michael; Siddiqui, Afzal

    2009-05-07

    The Distributed Energy Resources Customer Adoption Model is used to estimate the value an Oakland nursing home, a Riverside high school, and a Sunnyvale data center would need to put on higher electricity service reliability for them to adopt a Consortium for Electric Reliability Technology Solutions Microgrid (CM) based on economics alone. A fraction of each building's load is deemed critical based on its mission, and the added cost of CM capability to meet it added to on-site generation options. The three sites are analyzed with various resources available as microgrid components. Results show that the value placed on higher reliability often does not have to be significant for CM to appear attractive, about 25 $/kWcdota and up, but the carbon footprint consequences are mixed because storage is often used to shift cheaper off-peak electricity to use during afternoon hours in competition with the solar sources.

  18. A Dynamic Programming Approach to Estimate the Capacity Value of Energy Storage

    Broader source: Energy.gov [DOE]

    We present a method to estimate the capacity value of storage. Our method uses a dynamic program to model the effect of power system outages on the operation and state of charge of storage in subsequent periods. We combine the optimized dispatch from the dynamic program with estimated system loss of load probabilities to compute a probability distribution for the state of charge of storage in each period. This probability distribution can be used as a forced outage rate for storage in standard reliability-based capacity value estimation methods. Our proposed method has the advantage over existing approximations that it explicitly captures the effect of system shortage events on the state of charge of storage in subsequent periods. We also use a numerical case study, based on five utility systems in the U.S., to demonstrate our technique and compare it to existing approximation methods.

  19. Establishing a value chain for human factors in nuclear power plantcontrol room modernization

    SciTech Connect (OSTI)

    Joe, Jeffrey Clark; Thomas, Kenneth David; Boring, Ronald Laurids

    2015-07-01

    Commercial nuclear power plants in the United States (U.S.) have operated reliably and efficiently for decades. With the life extensions of plants now being planned for operation beyond their original operating licenses, there are opportunities to achieve even greater efficiencies, while maintaining high operational reliabilities, with strategic, risk- and economically-informed, upgrades to plant systems and infrastructure. The U.S. Department of Energy’s Light Water Reactor Sustainability (LWRS) program supports the commercial nuclear industry’s modernization efforts through research and development (R&D) activities across many areas to help establish the technical and economic bases for modernization activities. The Advanced Instrumentation, Information, and Control Systems Technologies pathway is one R&D focus area for the LWRS program, and has researchers at Idaho National Laboratory working with select utility partners to use human factors and instrumentation and controls R&D to help modernize the plant’s main control room. However, some in the nuclear industry have not been as enthusiastic about using human factors R&D to inform life extension decision making. Part of the reason for this may stem from uncertainty decision-makers have regarding how human factors fits into the value chain for nuclear power plant control room modernization. This paper reviews past work that has attempted to demonstrate the value of human factors, and then describes the value chain concept, how it applies to control room modernization, and then makes a case for how and why human factors is an essential link in the modernization value chain.

  20. Baseline and Target Values for PV Forecasts: Toward Improved Solar Power Forecasting: Preprint

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Baseline and Target Values for PV Forecasts: Toward Improved Solar Power Forecasting Preprint Jie Zhang 1 , Bri-Mathias Hodge 1 , Siyuan Lu 2 , Hendrik F. Hamann 2 , Brad Lehman 3 , Joseph Simmons 4 , Edwin Campos 5 , and Venkat Banunarayanan 6 1 National Renewable Energy Laboratory 2 IBM TJ Watson Research Center 3 Northeastern University 4 University of Arizona 5 Argonne National Laboratory 6 U.S. Department of Energy Presented at the IEEE Power and Energy Society General Meeting Denver,

  1. Market review - market values summary/February market review/current market data

    SciTech Connect (OSTI)

    1996-03-01

    This article is the February 1996 uranium market report. As reflected by the rising demand and decreasing supply of uranium, prices for UF6 and U3O8 increased. Separation services and conversion services prices remained constant. Data is presented for the recent trades, blocks or uranium for sale or loan, inquiries to purchase or borrow uranium, SWUs available and inquiries to purchase SWUs, and market values of U3O8 and UF6 expressed in selected currencies.

  2. New methods for identifying value added by a regional climate model |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Argonne National Laboratory methods for identifying value added by a regional climate model By Brian Grabowski * January 26, 2015 Tweet EmailPrint Regional climate models (RCMs) are a standard tool for downscaling climate forecasts to finer spatial scales. The evaluation of RCMs against observational data is an important step in building confidence in the use of RCMs for future prediction. In addition to model performance in climatological means and marginal distributions, a model's ability

  3. DOE/SC-ARM-TR-102 Sonde Adjust Value-Added Product Technical Report

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 Sonde Adjust Value-Added Product Technical Report D Troyan December 2011 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately

  4. DOE/SC-ARM-TR-131 Organic Aerosol Component (OACOMP) Value-

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    31 Organic Aerosol Component (OACOMP) Value- Added Product J Fast T Shippert Q Zhang C Parworth A Tilp F Mei August 2013 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or

  5. DOE/SC-ARM-TR-140 Droplet Number Concentration Value-Added Product

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 Droplet Number Concentration Value-Added Product L Riihimaki S McFarlane C Sivaraman June 2014 Version 1.0 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its

  6. DOE/SC-ARM/TR-087 Merged Sounding Value-Added Product D Troyan

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 Merged Sounding Value-Added Product D Troyan March 2012 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights.

  7. DOE/SC-ARM/TR-098 Micropulse Lidar Cloud Mask Value-Added Product Technical Report

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 Micropulse Lidar Cloud Mask Value-Added Product Technical Report C Sivaraman J Comstock July 2011 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would

  8. DOE/SC-ARM/TR-103 Cloud Condensation Nuclei Profile Value-Added

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 Cloud Condensation Nuclei Profile Value-Added Product S McFarlane C Sivaraman S Ghan October 2012 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would

  9. DOE/SC-ARM/TR-115 Aerosol Best Estimate (AEROSOLBE) Value-Added Product

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 Aerosol Best Estimate (AEROSOLBE) Value-Added Product C Flynn D Turner A Koontz D Chand C Sivaraman July 2012 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that

  10. DOE/SC-ARM/TR-124 Interpolated Sounding Value-Added Product

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 Interpolated Sounding Value-Added Product D Troyan February 2013 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned

  11. DOE/SC-ARM/TR-128 Tower Water-Vapor Mixing Ratio Value-Added

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 Tower Water-Vapor Mixing Ratio Value-Added Product April 2013 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights.

  12. DOE/SC-ARM/TR-129 Aerosol Optical Depth Value-Added Product

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9 Aerosol Optical Depth Value-Added Product A Koontz C Flynn G Hodges J Michalsky J Barnard March 2013 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use

  13. Assessing the Economic Value of New Utility-Scale Generation Projects

    Gasoline and Diesel Fuel Update (EIA)

    LCOE/LACE Workshop July 25, 2013 Chris Namovicz Assessing the Economic Value of New Utility-Scale Generation Projects Overview * Levelized cost of energy (LCOE) has been used by planners, analysts, policymakers, advocates and others to assess the economic competitiveness of technology options in the electric power sector * While of limited usefulness in the analysis of "conventional" utility systems, this approach is not generally appropriate when considering "unconventional"

  14. NREL: Regional Energy Deployment System (ReEDS) Model - Unique Value of

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ReEDS Unique Value of ReEDS Spatial Resolution and Variability Consideration The Regional Energy Deployment System (ReEDS) model has singular capabilities that differentiate it from other models and that make it uniquely suitable for certain types of analyses. While ReEDS can model all types of power generators and fuels-coal, gas, nuclear, renewables-it was designed primarily to address considerations for integrating renewable electric technologies into the power grid. In particular, it was

  15. Coprocessed nuclear fuels containing (U, Pu) values as oxides, carbides or carbonitrides

    DOE Patents [OSTI]

    Lloyd, M.H.

    1981-01-09

    Method for direct coprocessing of nuclear fuels derived from a product stream of fuels reprocessing facility containing uranium, plutonium, and fission product values comprising nitrate stabilization of said stream vacuum concentration to remove water and nitrates, neutralization to form an acid deficient feed solution for the internal gelation mode of sol-gel technology, green spherule formation, recovery and treatment for loading into a fuel element by vibra packed or pellet formation technologies.

  16. Coprocessed nuclear fuels containing (U, Pu) values as oxides, carbides or carbonitrides

    DOE Patents [OSTI]

    Lloyd, Milton H. (Oak Ridge, TN)

    1983-01-01

    Method for direct coprocessing of nuclear fuels derived from a product stream of a fuels reprocessing facility containing uranium, plutonium, and fission product values comprising nitrate stabilization of said stream vacuum concentration to remove water and nitrates, neutralization to form an acid deficient feed solution for the internal gelation mode of sol-gel technology, green spherule formation, recovery and treatment for loading into a fuel element by vibra packed or pellet formation technologies.

  17. Catalytic Conversion of Biomass-derived Feedstock (HMF) into Value Added

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Chemicals and Biofuels - Energy Innovation Portal Industrial Technologies Industrial Technologies Biomass and Biofuels Biomass and Biofuels Find More Like This Return to Search Catalytic Conversion of Biomass-derived Feedstock (HMF) into Value Added Chemicals and Biofuels Colorado State University Contact CSU About This Technology Technology Marketing Summary A catalytic reaction system by which the biomass-derived feedstock chemical HMF can be upgraded into a higher carbon content

  18. Recent Developments on the Broadband Heating Rate Profile Value-Added Product

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Recent Developments on the Broadband Heating Rate Profile Value-Added Product E. J. Mlawer, J. S. Delamere, and S. A. Clough Atmospheric and Environmental Research, Inc. Cambridge, Massachusetts M. A. Miller and K. L. Johnson Brookhaven National Laboratory Upton, New York T. R. Shippert and C. N. Long Pacific Northwest National Laboratory Richland, Washington R. G. Ellingson Florida State University Tallahassee, Florida M. H. Zhang State University of New York - Stony Brook Albany, New York R.

  19. High-Performance Computing at Los Alamos announces milestone for key/value

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    middleware High-Performance Computing announces milestone High-Performance Computing at Los Alamos announces milestone for key/value middleware Billion inserts-per-second data milestone reached for supercomputing tool. May 26, 2014 Billion inserts-per-second data milestone reached for supercomputing tool Billion inserts-per-second data milestone reached for supercomputing tool. Contact Nancy Ambrosiano Communications Office (505) 667-0471 Email "This milestone was achieved by a

  20. Methods for conversion of carbohydrates in ionic liquids to value-added chemicals

    DOE Patents [OSTI]

    Zhao, Haibo; Holladay, Johnathan E.

    2011-05-10

    Methods are described for converting carbohydrates including, e.g., monosaccharides, disaccharides, and polysaccharides in ionic liquids to value-added chemicals including furans, useful as chemical intermediates and/or feedstocks. Fructose is converted to 5-hydroxylmethylfurfural (HMF) in the presence of metal halide and acid catalysts. Glucose is effectively converted to HMF in the presence of chromium chloride catalysts. Yields of up to about 70% are achieved with low levels of impurities such as levulinic acid.

  1. Method for conversion of carbohydrate polymers to value-added chemical products

    DOE Patents [OSTI]

    Zhang, Zongchao C.; Brown, Heather M.; Su, Yu

    2012-02-07

    Methods are described for conversion of carbohydrate polymers in ionic liquids, including cellulose, that yield value-added chemicals including, e.g., glucose and 5-hydroxylmethylfurfural (HMF) at temperatures below 120.degree. C. Catalyst compositions that include various mixed metal halides are described that are selective for specified products with yields, e.g., of up to about 56% in a single step process.

  2. ARM Climate Research Facility Quarterly Value-Added Product Report, Fourth Quarter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 ARM Climate Research Facility Quarterly Value-Added Product Report C Sivaraman October 2015 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not

  3. Building America Top Innovations 2014 Profile: Valuing Green in the Appraisal Process

    Energy Savers [EERE]

    The Appraisal Institute now has agreements in place with several home certification organizations to use rater information to auto-generate a Green and Energy Efficiency Addendum to the appraisal that could help more accurately value energy-efficiency improvements for thousands of homes on the market. RESNET raters evaluated 120,000 homes in 2013 and are expected to rate more than 200,000 homes in 2014. Building America's BARA team facilitated discussions between the Appraisal Institute and

  4. Site Performance Measure Unit Lifecycle Total Estimate Pre-2016 Lifecycle Values

    Office of Environmental Management (EM)

    Management Guide Site Management Guide Site Management Guide (Blue Book) (Update 18, January 2016) PDF icon Site Management Guide (Blue Book) (Update 18, January 2016) More Documents & Publications 2014 ANNUAL SITE ENVIRONMENTAL REPORT (ASER) 2013 ANNUAL SITE ENVIRONMENTAL REPORT (ASER) 2011 Annual Site Environmental Report (ASER)

    Performance Measure Unit Lifecycle Total Estimate Pre-2016 Lifecycle Values 2016 Target 2017 Target Argonne National Laboratory-East TRU-RH Cubic meters 22 22

  5. DOE/SC-ARM/TR-132 Planetary Boundary Layer (PBL) Height Value

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 Planetary Boundary Layer (PBL) Height Value Added Product (VAP): Radiosonde Retrievals C Sivaraman S McFarlane 1 E Chapman Pacific Northwest National Laboratory M Jensen T Toto Brookhaven National Laboratory S Liu University of Maryland M Fischer Lawrence Berkeley National Laboratory August 2013 Version 1.0 1 Now at the U.S. Department of Energy, Climate & Environmental Science Division DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the

  6. Distribution coefficient values describing iodine, neptunium, selenium, technetium, and uranium sorption to Hanford sediments. Supplement 1

    SciTech Connect (OSTI)

    Kaplan, D.I.; Seme, R.J.

    1995-03-01

    Burial of vitrified low-level waste (LLW) in the vadose zone of the Hanford Site is being considered as a long-term disposal option. Regulations dealing with LLW disposal require that performance assessment (PA) analyses be conducted. Preliminary modeling efforts for the Hanford Site LLW PA were conducted to evaluate the potential health risk of a number of radionuclides, including Ac, Am, C, Ce, Cm, Co, Cs, Eu, 1, Nb, Ni, Np, Pa, Pb, Pu, Ra, Ru, Se, Sn, Sr, Tc, Th, U, and Zr (Piepho et al. 1994). The radionuclides, {sup 129}I, {sup 237}Np, {sup 79}Se, {sup 99}Tc, and {sup 234,235,238}U, were identified as posing the greatest potential health hazard. It was also determined that the outcome of these simulations were very sensitive to the parameter describing the extent to which radionuclides sorbed to the subsurface matrix, described as a distribution coefficient (K{sub d}). The distribution coefficient is a ratio of the radionuclide concentration associated with the solid phase to that in the liquid phase. The literature-derived K{sub d} values used in these simulations were conservative, i.e., lowest values within the range of reasonable values used to provide an estimate of the maximum health threat. Thus, these preliminary modeling results reflect a conservative estimate rather than a best estimate of what is likely to occur. The potential problem with providing only a conservative estimate is that it may mislead us into directing resources to resolve nonexisting problems.

  7. Value engineering: An alternative liner system at the La Paz County Regional Landfill

    SciTech Connect (OSTI)

    Shafer, A.L.; Purdy, S.; Tempelis, D.

    1997-11-01

    The La Paz County Regional Landfill is a 65 hectare (160 acre) municipal waste site located near the western border of Arizona between the cities of Parker and Quartzsite. The site is operated under a public/private partnership between the County of La Paz and Browning-Ferris Industries, Inc. (BFI). The County owns the landfill and infrastructure and BFI is responsible for facility improvements, environmental compliance, and daily operations. Following the initial permitting and construction of the first landfill cell, a value engineering review was conducted on the site design and permit requirements. Based on this review, substantial cost saving opportunities were identified. In order to implement the value engineering ideas, the site permit was modified and a new Solid Waste Facilities Plan was Submitted to the Arizona Department of Environmental Quality. This paper discusses the value engineering modifications that were conducted, the revisions to the permits, and the relative cost savings that were realized. The areas addressed include the liner system design, closure design, disposal capacity, and operations plan. Through the use of alternative liners a cost savings of well over 50 percent (as compared to the original permit) will be realized over the life of the landfill.

  8. The Economic Value of PV and Net Metering to Residential Customers in California

    SciTech Connect (OSTI)

    Darghouth, Naim; Barbose, Galen; Wiser, Ryan

    2010-05-17

    In this paper, we analyze the bill savings from PV for residential customers of the California's two largest electric utilities, under existing net metering tariffs as well as under several alternative compensation mechanisms. We find that economic value of PV to the customer is dependent on the structure of the underlying retail electricity rate and can vary quite significantly from one customer to another. In addition, we find that the value of the bill savings from PV generally declines with PV penetration level, as increased PV generation tends to offset lower-priced usage. Customers in our sample from both utilities are significantly better off with net metering than with a feed-in tariff where all PV generation is compensated at long-run avoided generation supply costs. Other compensation schemeswhich allow customers to displace their consumption with PV generation within each hour or each month, and are also based on the avoided costs, yield similar value to the customer as net metering.

  9. Methods for Analyzing the Economic Value of Concentrating Solar Power with Thermal Energy Storage

    SciTech Connect (OSTI)

    Denholm, Paul; Jorgenson, Jennie; Miller, Mackay; Zhou, Ella; Wang, Caixia

    2015-07-20

    Concentrating solar power with thermal energy storage (CSP-TES) provides multiple quantifiable benefits compared to CSP without storage or to solar photovoltaic (PV) technology, including higher energy value, ancillary services value, and capacity value. This report describes modeling approaches to quantifying these benefits that have emerged through state-level policymaking in the United States as well as the potential applicability of these methods in China. The technical potential for CSP-TES in China is significant, but deployment has not yet achieved the targets established by the Chinese government. According to the 12th Five Year Plan for Renewable Energy (2011-2015), CSP was expected to reach 1 GW by 2015 and 3 GW by 2020 in China, yet as of December 2014, deployment totaled only 13.8 MW. One barrier to more rapid deployment is the lack of an incentive specific to CSP, such as a feed-in tariff. The 13th Five Year Plan for Solar Generation (2016-2020), which is under development, presents an opportunity to establish a feed-in tariff specific to CSP. This report, produced under the auspices of the U.S.-China Renewable Energy Partnership, aims to support the development of Chinese incentives that advance CSP deployment goals.

  10. Bayesian Inference for Time Trends in Parameter Values using Weighted Evidence Sets

    SciTech Connect (OSTI)

    D. L. Kelly; A. Malkhasyan

    2010-09-01

    There is a nearly ubiquitous assumption in PSA that parameter values are at least piecewise-constant in time. As a result, Bayesian inference tends to incorporate many years of plant operation, over which there have been significant changes in plant operational and maintenance practices, plant management, etc. These changes can cause significant changes in parameter values over time; however, failure to perform Bayesian inference in the proper time-dependent framework can mask these changes. Failure to question the assumption of constant parameter values, and failure to perform Bayesian inference in the proper time-dependent framework were noted as important issues in NUREG/CR-6813, performed for the U. S. Nuclear Regulatory Commissions Advisory Committee on Reactor Safeguards in 2003. That report noted that in-dustry lacks tools to perform time-trend analysis with Bayesian updating. This paper describes an applica-tion of time-dependent Bayesian inference methods developed for the European Commission Ageing PSA Network. These methods utilize open-source software, implementing Markov chain Monte Carlo sampling. The paper also illustrates an approach to incorporating multiple sources of data via applicability weighting factors that address differences in key influences, such as vendor, component boundaries, conditions of the operating environment, etc.

  11. Second Life for Electric Vehicle Batteries: Answering Questions on Battery Degradation and Value

    SciTech Connect (OSTI)

    Neubauer, J. S.; Wood, E.; Pesaran, A.

    2015-05-04

    Battery second use – putting used plug-in electric vehicle (PEV) batteries into secondary service following their automotive tenure – has been proposed as a means to decrease the cost of PEVs while providing low cost energy storage to other fields (e.g. electric utility markets). To understand the value of used automotive batteries, however, we must first answer several key questions related to National Renewable Energy Laboratory (NREL) has developed a methodology and the requisite tools to answer these questions, including NREL’s Battery Lifetime Simulation Tool (BLAST). Herein we introduce these methods and tools, and demonstrate their application. We have found that capacity fade from automotive use has a much larger impact on second use value than resistance growth. Where capacity loss is driven by calendar effects more than cycling effects, average battery temperature during automotive service – which is often driven by climate – is found to be the single factor with the largest effect on remaining value. Installing hardware and software capabilities onboard the vehicle that can both infer remaining battery capacity from in-situ measurements, as well as track average battery temperature over time, will thereby facilitate the second use of automotive batteries.

  12. Value of Distributed Preprocessing of Biomass Feedstocks to a Bioenergy Industry

    SciTech Connect (OSTI)

    Christopher T Wright

    2006-07-01

    Biomass preprocessing is one of the primary operations in the feedstock assembly system and the front-end of a biorefinery. Its purpose is to chop, grind, or otherwise format the biomass into a suitable feedstock for conversion to ethanol and other bioproducts. Many variables such as equipment cost and efficiency, and feedstock moisture content, particle size, bulk density, compressibility, and flowability affect the location and implementation of this unit operation. Previous conceptual designs show this operation to be located at the front-end of the biorefinery. However, data are presented that show distributed preprocessing at the field-side or in a fixed preprocessing facility can provide significant cost benefits by producing a higher value feedstock with improved handling, transporting, and merchandising potential. In addition, data supporting the preferential deconstruction of feedstock materials due to their bio-composite structure identifies the potential for significant improvements in equipment efficiencies and compositional quality upgrades. Theses data are collected from full-scale low and high capacity hammermill grinders with various screen sizes. Multiple feedstock varieties with a range of moisture values were used in the preprocessing tests. The comparative values of the different grinding configurations, feedstock varieties, and moisture levels are assessed through post-grinding analysis of the different particle fractions separated with a medium-scale forage particle separator and a Rototap separator. The results show that distributed preprocessing produces a material that has bulk flowable properties and fractionation benefits that can improve the ease of transporting, handling and conveying the material to the biorefinery and improve the biochemical and thermochemical conversion processes.

  13. Buildings Energy Data Book: 1.3 Value of Construction and Research

    Buildings Energy Data Book [EERE]

    3 Value of Building Improvements and Repairs Relative to GDP, by Year ($2010 Billion) (1) GDP 1980 N.A. 1985 (2) 4.2% 1990 (3) 3.9% 1995 3.5% 2000 3.0% 2006 3.6% 2007 3.7% Note(s): Source(s): 235.7 259.8 495.5 13,354.9 1) Improvements includes additions, alterations, reconstruction, and major replacements. Repairs include maintenance. 2) 1986. 3) 1989. DOC, Expenditures for Residential Improvements and Repairs by Property Type, Quarterly, May 2005 for 1980-1990; DOC, Expenditures for Residential

  14. Exploring the Economic Value of EPAct 2005's PV Tax Credits

    SciTech Connect (OSTI)

    Bolinger, Mark A; Wiser, Ryan; Ing, Edwin

    2009-08-01

    This CESA - LBNL Case Study examines how much economic value do new and expanded federal tax credits really provide to PV system purchasers, and what implications might they hold for state/utility PV grant programs. The report begins with a discussion of the taxability of PV grants and their interaction with federal credits, as this issue significantly affects the analysis that follows. We then calculate the incremental value of EPAct's new and expanded credits for PV systems of different sizes, and owned by different types of entities. The report concludes with a discussion of potential implications for purchasers of PV systems, as well as for administrators of state/utility PV programs. The market for grid-connected photovoltaics (PV) in the US has grown dramatically in recent years, driven in large part by PV grant or 'buy-down' programs in California, New Jersey, and many other states. The recent announcement of a new 11-year, $3.2 billion PV program in California suggests that state policy will continue to drive even faster growth over the next decade. Federal policy has also played a role, primarily by providing commercial PV systems access to tax benefits, including accelerated depreciation (5-year MACRS schedule) and a business energy investment tax credit (ITC). Since the signing of the Energy Policy Act of 2005 (EPAct) on August 8, the federal government has begun to play a much more significant role in supporting both commercial and residential PV systems. Specifically, EPAct increased the federal ITC for commercial PV systems from 10% to 30% of system costs, and also created a new 30% ITC (capped at $2000) for residential solar systems. Both changes went into effect on January 1, 2006, for an initial period of two years, and in late 2006 were extended for an additional year. Unless extended further, the new residential ITC will expire, and the 30% commercial ITC will revert back to 10%, on January 1, 2009. How much economic value do these new and expanded federal tax credits really provide to PV system purchasers? And what implications might they hold for state/utility PV grant programs? Using a generic (i.e., non-state-specific) cash flow model, this report explores these questions.1 We begin with a discussion of the taxability of PV grants and their interaction with federal credits, as this issue significantly affects the analysis that follows. We then calculate the incremental value of EPAct's new and expanded credits for PV systems of different sizes, and owned by different types of entities. We conclude with a discussion of potential implications for purchasers of PV systems, as well as for administrators of state/utility PV programs.

  15. The Impact of Wind and Solar on the Value of Energy Storage

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Impact of Wind and Solar on the Value of Energy Storage Paul Denholm, Jennie Jorgenson, Marissa Hummon, and David Palchak National Renewable Energy Laboratory Brendan Kirby Consultant Ookie Ma U.S. Department of Energy Mark O'Malley University College Dublin Technical Report NREL/TP-6A20-60568 November 2013 NREL is a national laboratory of the U.S. Department of Energy Office of Energy Efficiency & Renewable Energy Operated by the Alliance for Sustainable Energy, LLC This report is

  16. Identification of RESNET HERS Index Values Corresponding to Minimal Complicance with the IECC Performance Path

    SciTech Connect (OSTI)

    Taylor, Zachary T.; Mendon, Vrushali V.

    2014-05-01

    This analysis provides a limited evaluation of the relationship between the Residential Energy Services Network (RESNET) Home Energy Rating System (HERS) Index and the simulation-based performance approach used in the 2012 International Energy Conservation Code (IECC). Not all differences between the approaches are analyzed here; only a subset of the distinctions considered likely to result in quantifiable differences in the outcomes of the two approaches or otherwise believed to be of interest to code developers and policy makers are considered. This analysis evaluates, for a single-family residence with various characteristics, the ranges of HERS Index values that would result in compliance with the 2012 IECC.

  17. Market review - Market values summary/October market review/current market data

    SciTech Connect (OSTI)

    1995-11-01

    This article is the October 1995 uranium market summary. In this reporting period, there were four transactions in the natural uranium market, no activity in the spot UF6 market, no activity in the spot conversion market, and only a single activity in the enrichment services market. Spot uranium volume dropped sharply, and active uranium supply rose. The rise in demand, however, more than offset this increase. Unrestricted exchange prices rose slightly, as did the unrestricted UF6 value. All other prices remained steady.

  18. Field programmable gate array-assigned complex-valued computation and its limits

    SciTech Connect (OSTI)

    Bernard-Schwarz, Maria, E-mail: maria.bernardschwarz@ni.com [National Instruments, Ganghoferstrasse 70b, 80339 Munich (Germany); Institute of Applied Physics, TU Wien, Wiedner Hauptstrasse 8, 1040 Wien (Austria); Zwick, Wolfgang; Klier, Jochen [National Instruments, Ganghoferstrasse 70b, 80339 Munich (Germany); Wenzel, Lothar [National Instruments, 11500 N MOPac Expy, Austin, Texas 78759 (United States); Grschl, Martin [Institute of Applied Physics, TU Wien, Wiedner Hauptstrasse 8, 1040 Wien (Austria)

    2014-09-15

    We discuss how leveraging Field Programmable Gate Array (FPGA) technology as part of a high performance computing platform reduces latency to meet the demanding real time constraints of a quantum optics simulation. Implementations of complex-valued operations using fixed point numeric on a Virtex-5 FPGA compare favorably to more conventional solutions on a central processing unit. Our investigation explores the performance of multiple fixed point options along with a traditional 64 bits floating point version. With this information, the lowest execution times can be estimated. Relative error is examined to ensure simulation accuracy is maintained.

  19. Functionally gradient material for membrane reactors to convert methane gas into value-added products

    DOE Patents [OSTI]

    Balachandran, U.; Dusek, J.T.; Kleefisch, M.S.; Kobylinski, T.P.

    1996-11-12

    A functionally gradient material for a membrane reactor for converting methane gas into value-added-products includes an outer tube of perovskite, which contacts air; an inner tube which contacts methane gas, of zirconium oxide, and a bonding layer between the perovskite and zirconium oxide layers. The bonding layer has one or more layers of a mixture of perovskite and zirconium oxide, with the layers transitioning from an excess of perovskite to an excess of zirconium oxide. The transition layers match thermal expansion coefficients and other physical properties between the two different materials. 7 figs.

  20. Functionally gradient material for membrane reactors to convert methane gas into value-added products

    DOE Patents [OSTI]

    Balachandran, Uthamalingam; Dusek, Joseph T.; Kleefisch, Mark S.; Kobylinski, Thadeus P.

    1996-01-01

    A functionally gradient material for a membrane reactor for converting methane gas into value-added-products includes an outer tube of perovskite, which contacts air; an inner tube which contacts methane gas, of zirconium oxide, and a bonding layer between the perovskite and zirconium oxide layers. The bonding layer has one or more layers of a mixture of perovskite and zirconium oxide, with the layers transitioning from an excess of perovskite to an excess of zirconium oxide. The transition layers match thermal expansion coefficients and other physical properties between the two different materials.