Powered by Deep Web Technologies
Note: This page contains sample records for the topic "operations sources compiled" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Identification, Verification, and Compilation of Produced Water Management Practices for Conventional Oil and Gas Production Operations  

SciTech Connect (OSTI)

The project is titled 'Identification, Verification, and Compilation of Produced Water Management Practices for Conventional Oil and Gas Production Operations'. The Interstate Oil and Gas Compact Commission (IOGCC), headquartered in Oklahoma City, Oklahoma, is the principal investigator and the IOGCC has partnered with ALL Consulting, Inc., headquartered in Tulsa, Oklahoma, in this project. State agencies that also have partnered in the project are the Wyoming Oil and Gas Conservation Commission, the Montana Board of Oil and Gas Conservation, the Kansas Oil and Gas Conservation Division, the Oklahoma Oil and Gas Conservation Division and the Alaska Oil and Gas Conservation Commission. The objective is to characterize produced water quality and management practices for the handling, treating, and disposing of produced water from conventional oil and gas operations throughout the industry nationwide. Water produced from these operations varies greatly in quality and quantity and is often the single largest barrier to the economic viability of wells. The lack of data, coupled with renewed emphasis on domestic oil and gas development, has prompted many experts to speculate that the number of wells drilled over the next 20 years will approach 3 million, or near the number of current wells. This level of exploration and development undoubtedly will draw the attention of environmental communities, focusing their concerns on produced water management based on perceived potential impacts to fresh water resources. Therefore, it is imperative that produced water management practices be performed in a manner that best minimizes environmental impacts. This is being accomplished by compiling current best management practices for produced water from conventional oil and gas operations and to develop an analysis tool based on a geographic information system (GIS) to assist in the understanding of watershed-issued permits. That would allow management costs to be kept in line with the specific projects and regions, which increases the productive life of wells and increases the ultimate recoverable reserves in the ground. A case study was conducted in Wyoming to validate the applicability of the GIS analysis tool for watershed evaluations under real world conditions. Results of the partnered research will continue to be shared utilizing proven methods, such as on the IGOCC Web site, preparing hard copies of the results, distribution of documented case studies, and development of reference and handbook components to accompany the interactive internet-based GIS watershed analysis tool. Additionally, there have been several technology transfer seminars and presentations. The goal is to maximize the recovery of our nation's energy reserves and to promote water conservation.

Rachel Henderson

2007-09-30T23:59:59.000Z

2

Compiling Codes on Euclid  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Compiling Codes Compiling Codes Overview Open Mpi is the the only MPI library available on Euclid. This implementation of MPI-2 is described at Open MPI: Open Source High...

3

Compiler Comparisons  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Compiler Comparisons Using a set of benchmarks described below, different optimization options for the different compilers on Edison are compared. The compilers are also...

4

Compilation of presentations: LANL-NRSS-Institute of Physics: radiological source technical cooperation  

SciTech Connect (OSTI)

A workshop was held in Tibilisi, Republic of Georgia February 7-8,2011 to discuss and train personnel on various instrumentation provided to the Nuclear Radiation Service and the Institute of Physics by the United States Global Threat Reduction Initiative. Instruments provided have been reviewed and approved via the local customs office. The instruments include: (1) Ludlum 3030E Smear Counters; (2) Ludlum 2360 Rate meter/Scalars; (3) Ludlum model 4310 detectors; (4) Arrow Tech Direct Reading Dosimeters and chargers; (5) ThermoFisher Scientific Mk2 Electronic Personal Dosimeter (EPD); (6) ThermoFisher Scientific EASYEPD2 configuration software; and (7) Associated support equipment, cables, planchets, etc. During the course of the training several power point briefs will be delivered. These briefs include theory of operation, operation, maintenance, calibration and configuration of the instruments described above. Several table top scenarios will be conducted during the training to reinforce the training material presented in the slides.

Streeper, Charles [Los Alamos National Laboratory; Fanning, Michael [Los Alamos National Laboratory; Feldman, Alex [Los Alamos National Laboratory

2011-01-20T23:59:59.000Z

5

Praxis compiler internals  

SciTech Connect (OSTI)

Praxis is a high level machine-oriented algebraic computer language, designed by Bolt Beranek and Newman, Inc. (BBN) and intended for such applications as process control, communications, and system programming in general. Under contract to Lawrence Livermore National Laboratories (LLNL), BBN has implemented the following three compilers for Praxis: a VAX compiler, running on VAX and producing VAX code; a PDP-11 compiler, running on the PDP-11 and producing code for that machine; and a cross compiler, running on VAX and producing code for the PDP-11. The compilers are written in Praxis and so compile themselves. Further, most of the code is common to the three compilers. This document describes the internal operation of the compilers. The emphasis is on the major data bases and interfaces with little discussion of the details of algorithms, since the latter can readily be deduced from study of the listings providing that the data being manipulated are understood. The purpose of this document is to provide enough information to a maintenance staff that does not include the initial implementors so that they can maintain the compiler and make modifications as requirements change.

Evans, A. Jr.

1981-01-01T23:59:59.000Z

6

Compiler Comparisons  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Each of the compilers have a wide variety of options that control the level of optimization of the exectuable code they produce. We have collected several optimization...

7

Compiler Comparisons  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to User Group and UserofProteinNewsatCompiler Comparisons Compiler

8

Propane cold neutron source: creation and operation experience  

SciTech Connect (OSTI)

In most cold neutron sources, utilized until recently, liquid hydrogen, liquid deuterium and their mixtures were used as a moderating medium. The sources with the liquid hydrogen moderator offer the most specific effectiveness of cold neutron generation. But they are complicated in design, require special safety measures in the course of operation and are very expensive. In this connection, it is of undoubted interest to create a source which, although it yields the specific generation of cold neutrons comparable to the liquid hydrogen one, is safer in operation and simple in design. We assume such a source may be one which uses as a moderator liquid propane cooled to liquid nitrogen temperature.

Zemlyanov, M. G.

1997-09-01T23:59:59.000Z

9

National Synchrotron Light Source guidelines for the conduct of operations  

SciTech Connect (OSTI)

To improve the quality and uniformity of operations at the Department of Energy`s facilities, the DOE issued Order 5480.19 ``Conduct of Operations Requirements at DOE facilities.`` This order recognizes that the success of a facilities mission critically depends upon a high level of performance by its personnel and equipment. This performance can be severely impaired if the facility`s Conduct of Operations pays inadequate attention to issues of organization, safety, health, and the environment. These guidelines are Brookhaven National Laboratory`s and the National Synchrotron Light Source`s acknowledgement of the principles of Conduct of Operations and the response to DOE Order 5480.19. These guidelines cover the following areas: (1) operations organization and administration; (2) shift routines and operating practices; (3) control area activities; (4) communications; (5) control of on-shift training; (6) investigation of abnormal events; (7) notifications; (8) control of equipment and system studies; (9) lockouts and tagouts; (10) independent verification; (11) log-keeping; (12) operations turnover; (13) operations aspects of facility process control (14) required reading; (15) timely orders to operators; (16) operations procedures; (17) operator aid posting; and (18) equipment sizing and labeling.

Buckley, M. [Brookhaven National Lab., Upton, NY (United States). National Synchrotron Light Source

1998-01-01T23:59:59.000Z

10

Source document compilation: Los Alamos investigations related to the environment, engineering, geology, and hydrology, 1961--1990. Volume 2  

SciTech Connect (OSTI)

This document is a compilation of informal reports, letters, and memorandums regarding geologic and hydrologic studies and investigations such as foundation investigations for structures, drilling or coring for environmental studies, development of water supply, or construction of test or observation wells for monitoring. Also included are replies requested for specific environmental, engineering, geologic, and hydrologic problems. The purpose of this document is to preserve and make the original data available to the environmental studies that are now in progress at Los Alamos and provide a reference for and supplement the LAMS report ``Records of Observation Wells, Test Holes, Test Wells, Supply Wells, Springs, and Surface water stations at Los Alamos: with Reference to the Geology and Hydrology,`` which is in preparation. The informal reports and memorandums are listed chronologically from December 1961 to January 1990. Item 208 is a descriptive history of the US Geological Survey`s activities at Los Alamos from 1946 through 1972. The history includes a list of published and unpublished reports that cover geology, hydrology, water supply, waste disposal, and environmental monitoring in the Los Alamos area.

Purtymun, W.D. [comp.

1994-03-01T23:59:59.000Z

11

Source document compilation: Los Alamos investigations related to the environment, engineering, geology, and hydrology, 1961--1990. Volume 1  

SciTech Connect (OSTI)

This document is a compilation of informal reports, letters, and memorandums regarding geologic and hydrologic studies and investigations such as foundation investigations for structures, drilling or coring for environmental studies, development of water supply, or construction of test or observation wells for monitoring. Also included are replies requested for specific environmental, engineering, geologic, and hydrologic problems. The purpose of this document is to preserve and make the original data available to the environmental studies that are now in progress at Los Alamos and provide a reference for and supplement the LAMS report ``Records of Observation Wells, Test Holes, Test Wells, Supply Wells, Springs, and Surface water stations at Los Alamos: with Reference to the Geology and Hydrology,`` which is in preparation. The informal reports and memorandums are listed chronologically from December 1961 to January 1990. Item 208 is a descriptive history of the US Geological Survey`s activities at Los Alamos from 1946 through 1972. The history includes a list of published and unpublished reports that cover geology, hydrology, water supply, waste disposal, and environmental monitoring in the Los Alamos area.

Purtymun, W.D. [comp.

1994-03-01T23:59:59.000Z

12

Compiling MATLAB Arun Chauhan  

E-Print Network [OSTI]

Compiling MATLAB Arun Chauhan Indiana University #12;2005 OSC Review, Compiling MATLAB Arun Chauhan;2005 OSC Review, Compiling MATLAB Arun Chauhan, Indiana University Overview #12;2005 OSC Review, Compiling MATLAB Arun Chauhan, Indiana University MATLAB IDE #12;2005 OSC Review, Compiling MATLAB Arun Chauhan

Chauhan, Arun

13

Operation of the ORNL High Particle Flux Helicon Plasma Source  

SciTech Connect (OSTI)

A high power, high particle flux rf-based helicon plasma source has been constructed at ORNL and operated at power levels up to 30 kW. High-density hydrogen and helium plasmas have been produced. The source has been designed as the basis for a linear plasma materials interaction (PMI) test facility that will generate particle fluxes Gamma(p) > 10(23) M-3 s(-1), and utilize additional ion and electron cyclotron heating to produce high parallel (to the magnetic field) heat fluxes of similar to 10 MW/m(2). An rf-based source for PMI research is of interest because high plasma densities are generated with no internal electrodes, allowing true steady state operation with minimal impurity generation. The ORNL helicon source has a diameter of 15 cm and to-date has operated at a frequency f = 13.56 MHz, with magnetic field strength vertical bar B vertical bar in the antenna region up to similar to 0.15 T. Maximum densities of 3 x 10(19) M-3 in He and 2.5 x 10(19) m(-3) in H have been achieved. Radial density profiles have been seen to be dependent on the axial vertical bar B vertical bar profile.

Goulding, Richard Howell [ORNL; Biewer, Theodore M [ORNL; Caughman, John B [ORNL; Chen, Guangye [ORNL; Owen, Larry W [ORNL; Sparks, Dennis O [ORNL

2011-01-01T23:59:59.000Z

14

Operation of the ORNL High Particle Flux Helicon Plasma Source  

SciTech Connect (OSTI)

A high power, high particle flux rf-based helicon plasma source has been constructed at ORNL and operated at power levels up to 30 kW. High-density hydrogen and helium plasmas have been produced. The source has been designed as the basis for a linear plasma materials interaction (PMI) test facility that will generate particle fluxes {Gamma}{sub p}10{sup 23} m{sup -3} s{sup -1}, and utilize additional ion and electron cyclotron heating to produce high parallel (to the magnetic field) heat fluxes of {approx}10 MW/m{sup 2}. An rf-based source for PMI research is of interest because high plasma densities are generated with no internal electrodes, allowing true steady state operation with minimal impurity generation. The ORNL helicon source has a diameter of 15 cm and to-date has operated at a frequency f = 13.56 MHz, with magnetic field strength |B| in the antenna region up to {approx}0.15 T. Maximum densities of 3x10{sup 19} m{sup -3} in He and 2.5x10{sup 19} m{sup -3} in H have been achieved. Radial density profiles have been seen to be dependent on the axial |B| profile.

Goulding, R. H.; Biewer, T. M.; Caughman, J. B. O.; Chen, G. C.; Owen, L. W.; Sparks, D. O. [Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, TN 37831-6169 (United States)

2011-12-23T23:59:59.000Z

15

Compiler Optimization Jordan Bradshaw  

E-Print Network [OSTI]

Compiler Optimization Jordan Bradshaw #12;Outline Overview Goals and Considerations ­ Scope. 346- 352. Print. "Compiler Optimization." Wikipedia. Wikimedia Foundation, 25 04 2010. Web. 25 Apr 2010. #12;Compiler Optimization Goals: ­ Speed

Valtorta, Marco

16

Low-energy dc ion source for low operating pressure  

SciTech Connect (OSTI)

We report on an experimental study of an ion source based on a Penning discharge with a cold hollow cathode in crossed electric and magnetic fields. The minimum vacuum chamber operating pressure was 3 10{sup ?5} Torr for argon and 5 10{sup ?5} Torr for hydrogen. The use of a hollow cathode allowed decreasing the discharge operating voltage down to 350 V at a discharge current of ?100 mA. At a discharge current of 100 mA and beam accelerating voltage of 2 kV, the ion current was 2.5 mA for argon and 8 mA for hydrogen, and the ion beam on-axis current density 170 and 450 ?A/cm{sup 2}, respectively. The current-voltage characteristics of the discharge and the radial ion beam current density distribution were measured. The influence of pressure on the discharge parameters and their time stability was investigated.

Oks, Efim, E-mail: oks@opee.hcei.tsc.ru [Institute of High Current Electronics, Russian Academy of Sciences, Akademichesky ave. 2/3, Tomsk 634055 (Russian Federation); State University of Control Systems and Radioelectronics, 40 Lenin Ave., Tomsk 634050 (Russian Federation); Shandrikov, Maxim [Institute of High Current Electronics, Russian Academy of Sciences, Akademichesky ave. 2/3, Tomsk 634055 (Russian Federation); Salvadori, Cecilia [Institute of Physics, University of So Paulo, C.P. 66318, CEP 05315-970 So Paulo S.P. (Brazil); Brown, Ian [Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, California 94720 (United States)

2014-08-15T23:59:59.000Z

17

National Synchrotron Light Source guidelines for the conduct of operations  

SciTech Connect (OSTI)

This report briefly discusses the following topics: NSLS operations organization and administration; shift routines and operating practices; NSLS control room activities; communications; control of on-shift training; investigation of abnormal events; notifications; control of equipment and system status; lock-out tagout; independent verification; logkeeping; shift turnover; required reading; shift orders; equipment operations guides; operator aid postings; and equipment labeling.

Fewell, N.

1990-03-01T23:59:59.000Z

18

EIS-0247: Construction and Operation of the Spallation Neutron Source  

Broader source: Energy.gov [DOE]

The United States needs a high-flux, short- pulsed neutron source to provide its scientific and industrial research communities with a much more intense source of pulsed neutrons for neutron...

19

,"Plant","Primary Energy Source","Operating Company","Net Summer...  

U.S. Energy Information Administration (EIA) Indexed Site

York" ,"Plant","Primary Energy Source","Operating Company","Net Summer Capacity (MW)" 1,"Robert Moses Niagara","Hydroelectric","New York Power Authority",2353.2...

20

,"Plant","Primary Energy Source","Operating Company","Net Summer...  

U.S. Energy Information Administration (EIA) Indexed Site

Virginia" ,"Plant","Primary Energy Source","Operating Company","Net Summer Capacity (MW)" 1,"Bath County","Pumped Storage","Virginia Electric & Power Co",3003 2,"North...

Note: This page contains sample records for the topic "operations sources compiled" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Orc Notation Compilation  

E-Print Network [OSTI]

Overview Orc Notation Compilation Status of Research Structuring the Cloud with Orc First Mysore http://orc.csres.utexas.edu #12;Overview Orc Notation Compilation Status of Research Questions How do Engineering How do we connect applications in the cloud? All of the above #12;Overview Orc Notation

Rajamani, Sriram K.

22

Fuel Source Isotopic Tailoring Impact on ITER Design, Operation and Safety  

E-Print Network [OSTI]

1 Fuel Source Isotopic Tailoring and Its Impact on ITER Design, Operation and Safety M. J. Gouge, W. The isotopic tailoring concept consists of utilizing a tritium-rich pellet source for core fueling and a deuterium- rich gas source for edge fueling. Because of the improved particle confinement associated

23

Intel Compiler Peformance on Edison  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Peformance on Edison Intel Compiler Peformance on Edison These are the Intel optimization options we compared. The quotations are from the Intel compiler on-line man pages....

24

Combined Operation of Solar Energy Source Heat Pump, Low-vale Electricity and Floor Radiant System  

E-Print Network [OSTI]

solar energy, low-vale electricity as heat sources in a floor radiant system are analyzed. This paper presents a new heat pump system and discusses its operational modes in winter....

Liu, G.; Guo, Z.; Hu, S.

2006-01-01T23:59:59.000Z

25

Investigation of ISIS and Brookhaven National Laboratory ion source electrodes after extended operation  

SciTech Connect (OSTI)

Linac4 accelerator of Centre Europeen de Recherches Nucleaires is under construction and a RF-driven H{sup -} ion source is being developed. The beam current requirement for Linac4 is very challenging: 80 mA must be provided. Cesiated plasma discharge ion sources such as Penning or magnetron sources are also potential candidates. Accelerator ion sources must achieve typical reliability figures of 95% and above. Investigating and understanding the underlying mechanisms involved with source failure or ageing is critical when selecting the ion source technology. Plasma discharge driven surface ion sources rely on molybdenum cathodes. Deformation of the cathode surfaces is visible after extended operation periods. A metallurgical investigation of an ISIS ion source is presented. The origin of the deformation is twofold: Molybdenum sputtering by cesium ions digs few tenths of mm cavities while a growth of molybdenum is observed in the immediate vicinity. The molybdenum growth under hydrogen atmosphere is hard and loosely bound to the bulk. It is, therefore, likely to peel off and be transported within the plasma volume. The observation of the cathode, anode, and extraction electrodes of the magnetron source operated at BNL for two years are presented. A beam simulation of H{sup -}, electrons, and Cs{sup -} ions was performed with the IBSimu code package to qualitatively explain the observations. This paper describes the operation conditions of the ion sources and discusses the metallurgical analysis and beam simulation results.

Lettry, J.; Gerardin, A.; Pereira, H.; Sgobba, S. [CERN, 1211 Geneva 23 (Switzerland); Alessi, J. [BNL, P.O. Box 5000, Upton, New York 11973-5000 (United States); Faircloth, D. [RAL, Harwell Oxford, Didcot OX11 0QX (United Kingdom); Kalvas, T. [University of Jyvaskyla, P.O.Box 35, FI-40014 (Finland)

2012-02-15T23:59:59.000Z

26

Investigation of ISIS and Brookhaven National Laboratory ion source electrodes after extended operation  

SciTech Connect (OSTI)

Linac4 accelerator of Centre Europeen de Recherches Nucleaires is under construction and a RF-driven H{sup -} ion source is being developed. The beam current requirement for Linac4 is very challenging: 80 mA must be provided. Cesiated plasma discharge ion sources such as Penning or magnetron sources are also potential candidates. Accelerator ion sources must achieve typical reliability figures of 95% and above. Investigating and understanding the underlying mechanisms involved with source failure or ageing is critical when selecting the ion source technology. Plasma discharge driven surface ion sources rely on molybdenum cathodes. Deformation of the cathode surfaces is visible after extended operation periods. A metallurgical investigation of an ISIS ion source is presented. The origin of the deformation is twofold: Molybdenum sputtering by cesium ions digs few tenths of mm cavities while a growth of molybdenum is observed in the immediate vicinity. The molybdenum growth under hydrogen atmosphere is hard and loosely bound to the bulk. It is, therefore, likely to peel off and be transported within the plasma volume. The observation of the cathode, anode, and extraction electrodes of the magnetron source operated at BNL for two years are presented. A beam simulation of H{sup -}, electrons, and Cs{sup -} ions was performed with the IBSimu code package to qualitatively explain the observations. This paper describes the operation conditions of the ion sources and discusses the metallurgical analysis and beam simulation results.

Lettry J.; Alessi J.; Faircloth, D.; Gerardin, A.; Kalvas, T.; Pereira, H.; Sgobba, S.

2012-02-23T23:59:59.000Z

27

Arroyo Colorado: A Compilation and Evaluation of Prior Studies and Data  

E-Print Network [OSTI]

This report was compiled per the project, Arroyo Colorado Agricultural Nonpoint Source Assessment funded by the TSSWCB through the CWA 319(h) NPS Grant Program. Under this project, TWRI was tasked to (1) compile historical water quality data...

Wagner, C.

2012-04-11T23:59:59.000Z

28

Characterization of the ITER model negative ion source during long pulse operation  

SciTech Connect (OSTI)

It is foreseen to operate the neutral beam system of the International Thermonuclear Experimental Reactor (ITER) for pulse lengths extending up to 1 h. The performance of the KAMABOKO III negative ion source, which is a model of the source designed for ITER, is being studied on the MANTIS test bed at Cadarache. This article reports the latest results from the characterization of the ion source, in particular electron energy distribution measurements and the comparison between positive ion and negative ion extraction from the source.

Hemsworth, R.S.; Boilson, D.; Crowley, B.; Homfray, D.; Esch, H.P.L. de; Krylov, A.; Svensson, L. [Association EURATOM-CEA, CEA Cadarache, F-13108, St. Paul lez Durance (France); Association EURATOM-DCU, PRL/NCPST, Glasnevin, Dublin 13 (Ireland); Euratom/UKAEA Fusion Association, Culham Science Centre, Abingdon, OX14 3DB (United Kingdom); Association EURATOM-CEA, CEA Cadarache, F-13108, St. Paul lez Durance (France)

2006-03-15T23:59:59.000Z

29

Low Power/Energy Compiler Optimizations Ulrich Kremer  

E-Print Network [OSTI]

35 Low Power/Energy Compiler Optimizations Ulrich Kremer Department of Computer Science Rutgers, Power/Energy vs. Performance, Summary 35.4 List of Optimizations Dynamic Voltage and Frequency Scaling for compilation and operating strategies to reduce power dissipation and energy usage, at the potential cost

Kremer, Ulrich

30

Compiling Codes on Hopper  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to User Group and UserofProteinNewsatCompiler

31

New source performance standards for industrial boilers. Volume 2. Review of industry operating practices  

SciTech Connect (OSTI)

The applicability is evaluated of several possible versions of a revised New Source Performance Standards (NSPS) for industrial boilers to boilers that are operated according to typical industry practices. A survey of operating practices is presented, and it is concluded that an NSPS that includes too high a percent removal requirement for SO/sub 2/ (90%) might be excessively costly and cause operating problems for the industrial operator. More field evaluations of low excess air and low Btu gasification are required to validate these techniques for pollution control under industrial boiler operating conditions. The cost of two small boilers with no SO/sub 2/ controls was less than one large boiler of twice the capacity with SO/sub 2/ controls. The annual cost of operating and maintaining the control system accounted for the difference.

Bryan, R.J.; Weisenberg, I.J.; Wilson, K.

1980-09-01T23:59:59.000Z

32

Beam extraction and high stability operation of high current electron cyclotron resonance proton ion source  

SciTech Connect (OSTI)

A high current electron cyclotron resonance proton ion source is designed and developed for the low energy high intensity proton accelerator at Bhabha Atomic Research Centre. The plasma discharge in the ion source is stabilized by minimizing the reflected microwave power using four stub auto tuner and magnetic field. The optimization of extraction geometry is performed using PBGUNS code by varying the aperture, shape, accelerating gap, and the potential on the electrodes. While operating the source, it was found that the two layered microwave window (6 mm quartz plate and 2 mm boron nitride plate) was damaged (a fine hole was drilled) by the back-streaming electrons after continuous operation of the source for 3 h at beam current of 2040 mA. The microwave window was then shifted from the line of sight of the back-streaming electrons and located after the water-cooled H-plane bend. In this configuration the stable operation of the high current ion source for several hours is achieved. The ion beam is extracted from the source by biasing plasma electrode, puller electrode, and ground electrode to +10 to +50 kV, ?2 to ?4 kV, and 0 kV, respectively. The total ion beam current of 3040 mA is recorded on Faraday cup at 40 keV of beam energy at 6001000 W of microwave power, 8001000 G axial magnetic field and (1.23.9) 10{sup ?3} mbar of neutral hydrogen gas pressure in the plasma chamber. The dependence of beam current on extraction voltage, microwave power, and gas pressure is investigated in the range of operation of the ion source.

Roychowdhury, P., E-mail: pradipr@barc.gov.in; Mishra, L.; Kewlani, H.; Mittal, K. C. [Accelerator and Pulse Power Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India)] [Accelerator and Pulse Power Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India); Patil, D. S. [Laser and Plasma Technology Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India)] [Laser and Plasma Technology Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India)

2014-03-15T23:59:59.000Z

33

Operation and Thermal Modeling of the ISIS H Source from 50 to 2 Hz Repetition Rates  

E-Print Network [OSTI]

CERNs Linac4 accelerator H? ion source, currently under construction, will operate at a 2 Hz repetition rate, with pulse length of 0.5 ms and a beam current of 80 mA. Its reliability must exceed 99 % with a mandatory 3 month uninterrupted operation period. A Penning ion source is successfully operated at ISIS; at 50 Hz repetition rate it reliably provides 55 mA H? pulses of 0.25 ms duration over 1 month. The discharge plasma ignition is very sensitive to the temperatures of the discharge region, especially of its cathode. The investigation by modeling and measurement of operation parameters suitable for arc ignition and H? production at 2 Hz is of paramount importance and must be understood prior to the implementation of discharge ion sources in the Linac4 accelerator. In its original configuration, the ISIS H? source delivers beam only if the repetition rate is above 12.5 Hz, this paper describes the implementation of a temperature control of the discharge region aiming at lower repetition rate op...

Pereira, H; Lettry, J

2013-01-01T23:59:59.000Z

34

Compilers at NERSC  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to User Group and UserofProteinNewsatCompiler Comparisons

35

Compilers at NERSC  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to User Group and UserofProteinNewsatCompiler ComparisonsEffective Use of

36

Compiling Codes on Carver  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to User Group and UserofProteinNewsatCompiler ComparisonsEffective Use

37

Compiling Codes on Euclid  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to User Group and UserofProteinNewsatCompiler ComparisonsEffective

38

Adaptive Optimizing Compilers for the 21st Keith D. Cooper Devika Subramanian Linda Torczon  

E-Print Network [OSTI]

Historically, compilers have operated by applying a fixed set of optimizations in a predetermined order. WeAdaptive Optimizing Compilers for the 21st Century Keith D. Cooper Devika Subramanian Linda Torczon call such an ordered list of optimizations a compilation sequence. This paper describes a prototype

39

Atomic mass compilation 2012  

SciTech Connect (OSTI)

Atomic mass reflects the total binding energy of all nucleons in an atomic nucleus. Compilations and evaluations of atomic masses and derived quantities, such as neutron or proton separation energies, are indispensable tools for research and applications. In the last decade, the field has evolved rapidly after the advent of new production and measuring techniques for stable and unstable nuclei resulting in substantial ameliorations concerning the body of data and their precision. Here, we present a compilation of atomic masses comprising the data from the evaluation of 2003 as well as the results of new measurements performed. The relevant literature in refereed journals and reports as far as available, was scanned for the period beginning 2003 up to and including April 2012. Overall, 5750 new data points have been collected. Recommended values for the relative atomic masses have been derived and a comparison with the 2003 Atomic Mass Evaluation has been performed. This work has been carried out in collaboration with and as a contribution to the European Nuclear Structure and Decay Data Network of Evaluations.

Pfeiffer, B., E-mail: bpfeiffe@uni-mainz.de [II. Physikalisches Institut, Justus-Liebig-Universitt Gieen, Gieen (Germany); GSI Helmholtzzentrum fr Schwerionenforschung, Darmstadt (Germany); Venkataramaniah, K. [Sri Sathya Sai Institute of Higher Learning, Prasanthinilayam (India)] [Sri Sathya Sai Institute of Higher Learning, Prasanthinilayam (India); Czok, U. [II. Physikalisches Institut, Justus-Liebig-Universitt Gieen, Gieen (Germany)] [II. Physikalisches Institut, Justus-Liebig-Universitt Gieen, Gieen (Germany); Scheidenberger, C. [GSI Helmholtzzentrum fr Schwerionenforschung, Darmstadt (Germany) [GSI Helmholtzzentrum fr Schwerionenforschung, Darmstadt (Germany); II. Physikalisches Institut, Justus-Liebig-Universitt Gieen, Gieen (Germany)

2014-03-15T23:59:59.000Z

40

XL Compiler Dr. Achim Bmelburg  

E-Print Network [OSTI]

=> traditional (K&R) C-compiler xlc => ANSI 89 C c89 => alias for xlc xlC => ANSI 98 C++ c99 => ANSI 99 C #12

Fiebig, Peter

Note: This page contains sample records for the topic "operations sources compiled" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Cray Compiler Peformance on Edison  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

on Edison Cray Compiler Peformance on Edison Cray recommends using the default optimization (-O2) which is equivalent to the higher levels of optimization with other...

42

Covanta Begins Operating Nation's First Energy-from-Waste Unit under the EPA's New Source Performance Standards  

E-Print Network [OSTI]

Covanta Begins Operating Nation's First Energy-from-Waste Unit under the EPA's New Source in the development and operation of large scale Energy-from-Waste and renewable energy projects, today announced it has begun operating the first energy-from-waste unit built under the U.S. Environmental Protection

Columbia University

43

Development of a high average current polarized electron source with long cathode operational lifetime  

SciTech Connect (OSTI)

Substantially more than half of the electromagnetic nuclear physics experiments conducted at the Continuous Electron Beam Accelerator Facility of the Thomas Jefferson National Accelerator Facility (Jefferson Laboratory) require highly polarized electron beams, often at high average current. Spin-polarized electrons are produced by photoemission from various GaAs-based semiconductor photocathodes, using circularly polarized laser light with photon energy slightly larger than the semiconductor band gap. The photocathodes are prepared by activation of the clean semiconductor surface to negative electron affinity using cesium and oxidation. Historically, in many laboratories worldwide, these photocathodes have had short operational lifetimes at high average current, and have often deteriorated fairly quickly in ultrahigh vacuum even without electron beam delivery. At Jefferson Lab, we have developed a polarized electron source in which the photocathodes degrade exceptionally slowly without electron emission, and in which ion back bombardment is the predominant mechanism limiting the operational lifetime of the cathodes during electron emission. We have reproducibly obtained cathode 1/e dark lifetimes over two years, and 1/e charge density and charge lifetimes during electron beam delivery of over 2?105???C/cm2 and 200 C, respectively. This source is able to support uninterrupted high average current polarized beam delivery to three experimental halls simultaneously for many months at a time. Many of the techniques we report here are directly applicable to the development of GaAs photoemission electron guns to deliver high average current, high brightness unpolarized beams.

C. K. Sinclair; P. A. Adderley; B. M. Dunham; J. C. Hansknecht; P. Hartmann; M. Poelker; J. S. Price; P. M. Rutt; W. J. Schneider; M. Steigerwald

2007-02-01T23:59:59.000Z

44

An internal compiler  

E-Print Network [OSTI]

00045 00063 00143 Content TTR $(PPT) TRA @EL Job counter Output line count IDCARD (12 words) Unused core limits Use WDIO Routines WDIO Routines S/R (PPf) TBA for operator's delete S/R MONTDB WDIO Routines 8 S/B MONTOR S/B MONTOR WDIO...

Braswell, Clarence Lynn

2012-06-07T23:59:59.000Z

45

Measurements of the subcriticality using advanced technique of shooting source during operation of NPP reactors  

SciTech Connect (OSTI)

According to the rules of nuclear safety, the measurements of the subcriticality of reactors should be carried out in the process of performing nuclear hazardous operations. An advanced technique of shooting source of neutrons is proposed to meet this requirement. As such a source, a pulsed neutron source (PNS) is used. In order to realize this technique, it is recommended to enable a PNS with a frequency of 120 Hz. The PNS is stopped after achieving a steady-state (on average) number of neutrons in the reactor volume. The change in the number of neutrons in the reactor volume is measured in time with an interval of discreteness of ?0.1 s. The results of these measurements with the application of a system of point-kinetics equations are used in order to calculate the sought subcriticality. The basic idea of the proposed technique used to measure the subcriticality is elaborated in a series of experiments on the Kvant assembly. The conditions which should be implemented in order to obtain a positive result of measurements are formulated. A block diagram of the basic version of the experimental setup is presented, whose main element is a pulsed neutron generator.

Lebedev, G. V., E-mail: lgv2004@mail.ru; Petrov, V. V. [National Research Center Kurchatov Institute (Russian Federation); Bobylyov, V. T.; Butov, R. I.; Zhukov, A. M.; Sladkov, A. A. [Dukhov VNIIA (Russian Federation)

2014-12-15T23:59:59.000Z

46

EIS-0302: Transfer of the Heat Source/Radioisotope Thermoelectric Generator Assembly and Test Operations From the Mound Site  

Broader source: Energy.gov [DOE]

This EIS analyzes DOE's proposed transfer of the Heat Source/Radioisotope Thermoelectric Generator (HS/RTG) operations at the Mound Site near Miamisburg, Ohio, to an alternative DOE site.

47

EA-1455: Enhanced Operations of the Advanced Photon Source at Argonne National Laboratory-East, Argonne, Illinois  

Broader source: Energy.gov [DOE]

This EA evaluates the environmental impacts for the proposal to continue and enhance operation of the Advanced photon Source, including modifications, upgrades, and new facilities, at the U.S....

48

1988 Bulletin compilation and index  

SciTech Connect (OSTI)

This document is published to provide current information about the national program for managing spent fuel and high-level radioactive waste. This document is a compilation of issues from the 1988 calendar year. A table of contents and one index have been provided to assist in finding information.

NONE

1989-02-01T23:59:59.000Z

49

slides compiled from Alex Aiken's,  

E-Print Network [OSTI]

Testing slides compiled from Alex Aiken's, Neelam Gupta's, Tao Xie's. #12;CS590F Software Reliability Why Testing Researchers investigate many approaches to improving software quality But the world tests > 50% of the cost of software development is testing Testing is consistently a hot research topic

Zhang, Xiangyu

50

Plasma emission spectroscopy for operating and developing the Spallation Neutron Source (SNS) H{sup ?} ion sources  

SciTech Connect (OSTI)

A RF-driven, Cs-enhanced H{sup ?} ion source feeds the SNS accelerator with a high current (typically >50 mA), ?1.0 ms pulsed beam at 60 Hz. To achieve the persistent high current beam for several weeks long service cycles, each newly installed ion source undergoes a rigorous conditioning and cesiation processes. Plasma conditioning outgases the system and sputter-cleans the ion conversion surfaces. A cesiation process immediately following the plasma conditioning releases Cs to provide coverage on the ion conversion surfaces. The effectiveness of the ion source conditioning and cesiation is monitored with plasma emission spectroscopy using a high-sensitivity optical spectrometer. Plasma emission spectroscopy is also used to provide a means for diagnosing and confirming a failure of the insulating coating of the ion source RF antenna which is immersed in the plasma. Emissions of composition elements of the antenna coating material, Na emission being the most significant, drastically elevate to signal a failure when it happens. Plasma spectra of the developmental ion source with an AlN (aluminum nitrite) chamber and an external RF antenna are also briefly discussed.

Han, B. X., E-mail: hanb@ornl.gov; Welton, R. F.; Murray, S. N.; Pennisi, T. R.; Santana, M.; Stockli, M. P. [Spallation Neutron Source, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831 (United States)] [Spallation Neutron Source, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831 (United States)

2014-02-15T23:59:59.000Z

51

TUNE: Compiler-Directed Automatic Performance Tuning  

SciTech Connect (OSTI)

This project has developed compiler-directed performance tuning technology targeting the Cray XT4 Jaguar system at Oak Ridge, which has multi-core Opteron nodes with SSE-3 SIMD extensions, and the Cray XE6 Hopper system at NERSC. To achieve this goal, we combined compiler technology for model-guided empirical optimization for memory hierarchies with SIMD code generation, which have been developed by the PIs over the past several years. We examined DOE Office of Science applications to identify performance bottlenecks and apply our system to computational kernels that operate on dense arrays. Our goal for this performance-tuning technology has been to yield hand-tuned levels of performance on DOE Office of Science computational kernels, while allowing application programmers to specify their computations at a high level without requiring manual optimization. Overall, we aim to make our technology for SIMD code generation and memory hierarchy optimization a crucial component of high-productivity Petaflops computing through a close collaboration with the scientists in national laboratories.

Hall, Mary [University of Utah

2014-09-18T23:59:59.000Z

52

Project Project Funding Operational & Maintenance Costs Univ. Project Title GSF Brief Description of Project Location Amount Source  

E-Print Network [OSTI]

Estimated Annual Amount For Amount Source STATE UNIVERSITY SYSTEM 2012-2013 Fixed Capital Outlay ProjectsProject Project Funding Operational & Maintenance Costs Univ. Project Title GSF Brief Description that will respond to the latest trends in small-group learning, technology resources, and collaboration spaces

Slatton, Clint

53

Minimization of DC Reactor and Operation Characteristics of Direct-Power-Controlled Current-Source PWM Rectifier  

E-Print Network [OSTI]

Minimization of DC Reactor and Operation Characteristics of Direct-Power-Controlled Current control; hence inductance of the DC reactor can be reduced. Feasibility of the strategy is verified characteristics of the direct power control based current-source PWM rectifier with a miniaturized DC reactor

Fujimoto, Hiroshi

54

Thermionic converter with differentially heated cesium-oxygen source and method of operation  

SciTech Connect (OSTI)

A thermionic converter having an emitter, a collector, and a source of cesium vapor is provided wherein the source of cesium vapor is differentially heated so that said source has a hotter end and a cooler end, with cesium vapor evaporating from said hotter end into the space between the emitter and the collector and with cesium vapor condensing at said cooler end. The condensed cesium vapor migrates through a porous element from the cooler end to the hotter end.

Rasor, Ned S. (Cupertino, CA); Riley, David R. (West Newton, PA); Murray, Christopher S. (Bethel Park, PA); Geller, Clint B. (Pittsburgh, PA)

2000-01-01T23:59:59.000Z

55

Thermionic converter with differentially heated cesium-oxygen source and method of operation  

SciTech Connect (OSTI)

A thermionic converter having an emitter, a collector, and a source of cesium vapor is provided, wherein the source of cesium vapor is differentially heated so that said source has a hotter end and a cooler end, with cesium vapor evaporating from said hotter end into the space between the emitter and the collector and with cesium vapor condensing at said cooler end. The condensed cesium vapor migrates through a porous element from the cooler end to the hotter end.

Rasor, N.S.; Riley, D.R.; Murray, C.S.; Geller, C.B.

1998-12-01T23:59:59.000Z

56

X-ray source considerations in operation of digital detector arrays  

SciTech Connect (OSTI)

Digital Detector Arrays (DDA) are increasingly replacing film in radiography applications. Standards exist for characterizing the performance of these detectors, and for using them in specific inspections. We have observed that the selection of the x-ray source to use with these detectors can also have a significant influence on the performance. We look at differences between standard, and micro-focus x-ray tubes, and end-window vs. side-window micro-focus tubes. We find that for best results, one must calibrate the DDA for the source settings used during an inspection. This is particularly true for variable-focus sources.

Jensen, Terrence; Wendt, Scott [Iowa State University, Center for NDE, 1915 Scholl Road, Ames, IA 50011 (United States)

2014-02-18T23:59:59.000Z

57

Integration of renewable energy sources: reliability-constrained power system planning and operations using computational intelligence  

E-Print Network [OSTI]

of cost, power dispatchability, and environmental impact. For instance, the intermittency of some renewable energy sources may compromise the system reliability when they are integrated into the traditional power grids. Thus, multiple issues should...

Wang, Lingfeng

2009-05-15T23:59:59.000Z

58

Operations manual for student-team-built hybrid power source to recharge an Unmanned Undersea Vehicle  

E-Print Network [OSTI]

Unmanned Undersea Vehicles (UUVs) have the potential to explore and monitor oceans in unprecedented ways, but their present batteries only allow them to operate for days at a time. A team of students designed and built a ...

Sue-Ho, Jonathan

2013-01-01T23:59:59.000Z

59

SOURCE?  

Energy Savers [EERE]

Department of Energy (DOE) in partnership with Lawrence Berkeley National Laboratory (LBNL), is an open-source code package designed to be a common, low-cost, standardized tool...

60

Online tuning of impedance matching circuit for long pulse inductively coupled plasma source operationAn alternate approach  

SciTech Connect (OSTI)

Impedance matching circuit between radio frequency (RF) generator and the plasma load, placed between them, determines the RF power transfer from RF generator to the plasma load. The impedance of plasma load depends on the plasma parameters through skin depth and plasma conductivity or resistivity. Therefore, for long pulse operation of inductively coupled plasmas, particularly for high power (?100 kW or more) where plasma load condition may vary due to different reasons (e.g., pressure, power, and thermal), online tuning of impedance matching circuit is necessary through feedback. In fusion grade ion source operation, such online methodology through feedback is not present but offline remote tuning by adjusting the matching circuit capacitors and tuning the driving frequency of the RF generator between the ion source operation pulses is envisaged. The present model is an approach for remote impedance tuning methodology for long pulse operation and corresponding online impedance matching algorithm based on RF coil antenna current measurement or coil antenna calorimetric measurement may be useful in this regard.

Sudhir, Dass; Bandyopadhyay, M., E-mail: mainak@ter-india.org; Chakraborty, A. [ITER-India, Institute for Plasma Research, A-29, GIDC, Sector-25, Gandhinagar, Gujarat 382 025 (India)] [ITER-India, Institute for Plasma Research, A-29, GIDC, Sector-25, Gandhinagar, Gujarat 382 025 (India); Kraus, W. [Max-Planck-Institut fr Plasmaphysik, Boltzmannstrasse 2, 85740 Garching (Germany)] [Max-Planck-Institut fr Plasmaphysik, Boltzmannstrasse 2, 85740 Garching (Germany); Gahlaut, A.; Bansal, G. [Institute for Plasma Research, Bhat, Gandhinagar, Gujarat 382 428 (India)] [Institute for Plasma Research, Bhat, Gandhinagar, Gujarat 382 428 (India)

2014-01-15T23:59:59.000Z

Note: This page contains sample records for the topic "operations sources compiled" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Journal of Power Sources 167 (2007) 1117 Voltage reversal during microbial fuel cell stack operation  

E-Print Network [OSTI]

Journal of Power Sources 167 (2007) 1117 Voltage reversal during microbial fuel cell stack February 2007; accepted 9 February 2007 Available online 20 February 2007 Abstract Microbial fuel cells Elsevier B.V. All rights reserved. Keywords: Microbial fuel cell; Voltage reversal; Stack; Direct electron

2007-01-01T23:59:59.000Z

62

Compiler Construction Lecture 3: Lexical Analysis II  

E-Print Network [OSTI]

Compiler Construction Lecture 3: Lexical Analysis II (Extended Matching Problem) Thomas Noll-Longest-Match Analysis 5 Implementation of FLM Analysis Compiler Construction Summer Semester 2012 3.2 #12;Lexical Construction Summer Semester 2012 3.3 #12;The DFA Method I Known from Formal Systems, Automata and Processes

brahm, Erika

63

Operational characteristics of the J-PARC cryogenic hydrogen system for a spallation neutron source  

SciTech Connect (OSTI)

The J-PARC cryogenic hydrogen system provides supercritical hydrogen with the para-hydrogen concentration of more than 99 % and the temperature of less than 20 K to three moderators so as to provide cold pulsed neutron beams of a higher neutronic performance. Furthermore, the temperature fluctuation of the feed hydrogen stream is required to be within 0.25 K. A stable 300-kW proton beam operation has been carried out since November 2012. The para-hydrogen concentrations were measured during the cool-down process. It is confirmed that para-hydrogen always exists in the equilibrium concentration because of the installation of an ortho-para hydrogen convertor. Propagation characteristics of temperature fluctuation were measured by temporarily changing the heater power under off-beam condition to clarify the effects of a heater control for thermal compensation on the feed temperature fluctuation. The experimental data gave an allowable temperature fluctuation of 1.05 K. It is clarified through a 286-kW and a 524-kW proton beam operations that the heater control would be applicable for the 1-MW proton beam operation by extrapolating from the experimental data.

Tatsumoto, Hideki; Ohtsu, Kiichi; Aso, Tomokazu; Kawakami, Yoshihiko; Teshigawara, Makoto [J-PARC Center, Japan Atomic Energy Agency, Tokai, Ibaraki, 319-1195 (Japan)

2014-01-29T23:59:59.000Z

64

Compiling software for a hierarchical distributed processing system  

DOE Patents [OSTI]

Compiling software for a hierarchical distributed processing system including providing to one or more compiling nodes software to be compiled, wherein at least a portion of the software to be compiled is to be executed by one or more nodes; compiling, by the compiling node, the software; maintaining, by the compiling node, any compiled software to be executed on the compiling node; selecting, by the compiling node, one or more nodes in a next tier of the hierarchy of the distributed processing system in dependence upon whether any compiled software is for the selected node or the selected node's descendents; sending to the selected node only the compiled software to be executed by the selected node or selected node's descendent.

Archer, Charles J; Blocksome, Michael A; Ratterman, Joseph D; Smith, Brian E

2013-12-31T23:59:59.000Z

65

Hybrid Ground Source System Analysis and Tool Development | Department...  

Broader source: Energy.gov (indexed) [DOE]

Hybrid Ground Source System Analysis and Tool Development Hybrid Ground Source System Analysis and Tool Development Project objectives: 1. Compile filtered hourly data for three...

66

Engineering Physics Compiled by Elissa How (2013)  

E-Print Network [OSTI]

Engineering Physics fonds Compiled by Elissa How (2013) *** Institutional records -- researcher Notes Series Descriptions o Chronological Engineering Physics Files o Course Materials o Canadian Engineering Accreditation Board o Miscellaneous o Photographs File List Catalogue entry (UBC Library

Handy, Todd C.

67

A Compilation of Internship Reports - 2012  

SciTech Connect (OSTI)

This compilation documents all research project undertaken by the 2012 summer Department of Energy - Workforce Development for Teachers and Scientists interns during their internship program at Brookhaven National Laboratory.

Stegman M.; Morris, M.; Blackburn, N.

2012-08-08T23:59:59.000Z

68

Ronald Shearer Compiled by Christopher Hives (1986)  

E-Print Network [OSTI]

Ronald Shearer fonds Compiled by Christopher Hives (1986) University of British Columbia Archives Commission [n.d.] 1-13 Keith Acheson - Carleton U. / John Chant - Queen's U. (May 17, 1971) 1-14 C.L. Barber

Handy, Todd C.

69

Interface Compilation: Steps toward Compiling Program Interfaces as Languages  

E-Print Network [OSTI]

systems, programmers are limited to writing code, while the power to transform the code has been reserved Magik gives to programmers enables a broad class of optimization and code transformations. This paper's data structures and internally), operations on this state (defined by the interface's procedures

Engler, Dawson

70

Selected Hanford reactor and separations operating data for 1960--1964  

SciTech Connect (OSTI)

The purpose of this letter report is to reconstruct from available information that data which can be used to develop daily reactor operating history for 1960--1964. The information needed for source team calculations (as determined by the Source Terms Task Leader) were extracted and included in this report. The data on the amount of uranium dissolved by the separations plants (expressed both as tons and as MW) is also included in this compilation.

Gydesen, S.P.

1992-09-01T23:59:59.000Z

71

Final:Realizing Domain-Specific Compiler Optimizations via Generic Programming  

E-Print Network [OSTI]

-level" operations of built-in types; there are no mechanisms for defining domain-specific optimization rules languages (9) and the BroadWay compiler (6), allow more powerful domain-specific optimizations by devising and their operations, and, second, to annotate the programs to indicate where the transformations should apply

Paris-Sud XI, Universit de

72

Compilation of network activity logs on a DECnet host  

SciTech Connect (OSTI)

Log files are created for all incoming connection requests on a DECnet host. These log files contain connection data such as the requesting source, destination, and throughput. The procedures (referred to as collect software) outlined in this report, were written to collect these log files, to extract the essential information, and to condense the data into one-line records. The two VAX/VMS systems at SNLA that currently run these procedures compile network transaction logs on a weekly basis. This document is intended for VAX/VMS system managers who wish to install, and possibly modify, this software.

George, M.

1987-07-01T23:59:59.000Z

73

ANEMOS: A computer code to estimate air concentrations and ground deposition rates for atmospheric nuclides emitted from multiple operating sources  

SciTech Connect (OSTI)

This code estimates concentrations in air and ground deposition rates for Atmospheric Nuclides Emitted from Multiple Operating Sources. ANEMOS is one component of an integrated Computerized Radiological Risk Investigation System (CRRIS) developed for the US Environmental Protection Agency (EPA) for use in performing radiological assessments and in developing radiation standards. The concentrations and deposition rates calculated by ANEMOS are used in subsequent portions of the CRRIS for estimating doses and risks to man. The calculations made in ANEMOS are based on the use of a straight-line Gaussian plume atmospheric dispersion model with both dry and wet deposition parameter options. The code will accommodate a ground-level or elevated point and area source or windblown source. Adjustments may be made during the calculations for surface roughness, building wake effects, terrain height, wind speed at the height of release, the variation in plume rise as a function of downwind distance, and the in-growth and decay of daughter products in the plume as it travels downwind. ANEMOS can also accommodate multiple particle sizes and clearance classes, and it may be used to calculate the dose from a finite plume of gamma-ray-emitting radionuclides passing overhead. The output of this code is presented for 16 sectors of a circular grid. ANEMOS can calculate both the sector-average concentrations and deposition rates at a given set of downwind distances in each sector and the average of these quantities over an area within each sector bounded by two successive downwind distances. ANEMOS is designed to be used primarily for continuous, long-term radionuclide releases. This report describes the models used in the code, their computer implementation, the uncertainty associated with their use, and the use of ANEMOS in conjunction with other codes in the CRRIS. A listing of the code is included in Appendix C.

Miller, C.W.; Sjoreen, A.L.; Begovich, C.L.; Hermann, O.W.

1986-11-01T23:59:59.000Z

74

Compiling and Linking | Argonne Leadership Computing Facility  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to User Group and UserofProteinNewsatCompiler Compiling and Linking Using

75

PERFORMING DIAGNOSTICS ON THE SPALLATION NEUTRON SOURCE VISION BEAM LINE TO ELIMINATE HIGH VIBRATION LEVELS AND PROVIDE A SUSTAINABLE OPERATION  

SciTech Connect (OSTI)

The Spallation Neutron Source (SNS) at the Oak Ridge National Laboratory (ORNL) provides variable energy neutrons for a variety of experiments. The neutrons proceed down beam lines to the experiment hall, which houses a variety of experiments and test articles. Each beam line has one or more neutron choppers which filter the neutron beam based on the neutron energy by using a rotating neutron absorbing material passing through the neutron beam. Excessive vibration of the Vision beam line, believed to be caused by the T0 chopper, prevented the Vision beam line from operating at full capacity. This problem had been addressed several times by rebalancing/reworking the T0 beam chopper but the problem stubbornly persisted. To determine the cause of the high vibration, dynamic testing was performed. Twenty-seven accelerometer and motor current channels of data were collected during drive up, drive down, coast down, and steady-state conditions; resonance testing and motor current signature analysis were also performed. The data was analyzed for traditional mechanical/machinery issues such as misalignment and imbalance using time series analysis, frequency domain analysis, and operating deflection shape analysis. The analysis showed that the chopper base plate was experiencing an amplified response to the excitation provided by the T0 beam chopper. The amplified response was diagnosed to be caused by higher than expected base plate flexibility, possibly due to improper grouting or loose floor anchors. Based on this diagnosis, a decision was made to dismantle the beam line chopper and remount the base plate. Neutron activation of the beam line components make modifications to the beam line especially expensive and time consuming due to the radiation handling requirements, so this decision had significant financial and schedule implications. It was found that the base plate was indeed loose because of improper grouting during its initial installation. The base plate was modified by splitting it into multiple sections, isolating the T0 chopper from the rest of the beam line, and each section was then reinstalled and re-grouted. After these modifications, the vibration levels were reduced by a factor of 30. The reduction in vibration level was sufficient to allow the Vision beam line to operate at full capacity for the first time since its completed construction date.

Van Hoy, Blake W [ORNL

2014-01-01T23:59:59.000Z

76

Hydrate Control for Gas Storage Operations  

SciTech Connect (OSTI)

The overall objective of this project was to identify low cost hydrate control options to help mitigate and solve hydrate problems that occur in moderate and high pressure natural gas storage field operations. The study includes data on a number of flow configurations, fluids and control options that are common in natural gas storage field flow lines. The final phase of this work brings together data and experience from the hydrate flow test facility and multiple field and operator sources. It includes a compilation of basic information on operating conditions as well as candidate field separation options. Lastly the work is integrated with the work with the initial work to provide a comprehensive view of gas storage field hydrate control for field operations and storage field personnel.

Jeffrey Savidge

2008-10-31T23:59:59.000Z

77

Agriculture Club Compiled by Christopher Hives (2000)  

E-Print Network [OSTI]

Agriculture Club fonds Compiled by Christopher Hives (2000) Revised April 2010 University;Fonds Description Agriculture Club fonds. ­ 1928-1935. 1 volume. Administrative History Established in 1928/29, the Agriculture Club succeeded the Agricultural Discussion Club and the Livestock Club

Handy, Todd C.

78

Gladys Wright Compiled by Laurenda Daniells (1980)  

E-Print Network [OSTI]

Gladys Wright fonds Compiled by Laurenda Daniells (1980) University of British Columbia Archives Gladys Wright fonds. ­ 1923, 1980. 13 cm of textual materials. Biographical Sketch Gladys Wright (nee and Content Fonds consists of a hand-written account of Gladys Wright's memories of the UBC Fairview campus

Handy, Todd C.

79

A Compiler Framework for Optimization of Affine Loop Nests for General Purpose Computations on GPUs  

E-Print Network [OSTI]

]. Until very recently, GPGPU computations were performed by transforming matrix operations. Although the polyhedral model of dependence abstraction and program transformation is much more powerfulA Compiler Framework for Optimization of Affine Loop Nests for General Purpose Computations on GPUs

Ramanujam, J. "Ram"

80

Hopper compilers and DDT short outage next Wed, May 16  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

compilers and DDT short outage next Wed, May 16 Hopper compilers and DDT short outage next Wed, May 16 May 10, 2012 (0 Comments) Due to a scheduled maintenance for the License...

Note: This page contains sample records for the topic "operations sources compiled" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Privacy Act of 1974; Publication of Compilation of Privacy Act...  

Office of Environmental Management (EM)

Privacy Act of 1974; Publication of Compilation of Privacy Act Systems of Records Privacy Act of 1974; Publication of Compilation of Privacy Act Systems of Records Privacy Act of...

82

National Energy Strategy: A compilation of public comments; Interim Report  

SciTech Connect (OSTI)

This Report presents a compilation of what the American people themselves had to say about problems, prospects, and preferences in energy. The Report draws on the National Energy Strategy public hearing record and accompanying documents. In all, 379 witnesses appeared at the hearings to exchange views with the Secretary, Deputy Secretary, and Deputy Under Secretary of Energy, and Cabinet officers of other Federal agencies. Written submissions came from more than 1,000 individuals and organizations. Transcripts of the oral testimony and question-and-answer (Q-and-A) sessions, as well as prepared statements submitted for the record and all other written submissions, form the basis for this compilation. Citations of these sources in this document use a system of identifying symbols explained below and in the accompanying box. The Report is organized into four general subject areas concerning: (1) efficiency in energy use, (2) the various forms of energy supply, (3) energy and the environment, and (4) the underlying foundations of science, education, and technology transfer. Each of these, in turn, is subdivided into sections addressing specific topics --- such as (in the case of energy efficiency) energy use in the transportation, residential, commercial, and industrial sectors, respectively. 416 refs., 44 figs., 5 tabs.

Not Available

1990-04-01T23:59:59.000Z

83

Design-Driven Compilation Radu Rugina and Martin Rinard  

E-Print Network [OSTI]

Design-Driven Compilation Radu Rugina and Martin Rinard Laboratory for Computer Science introduces design-driven compilation, an approach in which the compiler uses design information to drive its analysis and verify that the program conforms to its design. Although this requires the programmer

Rinard, Martin

84

User manual for the Aquarius Prolog compiler 1. Introduction  

E-Print Network [OSTI]

stream, however, the whole stream is read before compilation starts. This manual is organized into ten sections. Section 2 documents the compiler's directives. Section 3 gives the compiler's options. Section 4 gives a short overview of the dataflow analysis done by the com­ piler. Section 5 gives the type

Bonaventure, Olivier

85

1991 OCRWM bulletin compilation and index  

SciTech Connect (OSTI)

The OCRWM Bulletin is published by the Department of Energy, Office of Civilian Radioactive Waste Management, to provide current information about the national program for managing spent fuel and high-level radioactive waste. The document is a compilation of issues from the 1991 calendar year. A table of contents and an index have been provided to reference information contained in this year`s Bulletins.

NONE

1992-05-01T23:59:59.000Z

86

Magic State Distillation and Gate Compilation in Quantum Algorithms for Quantum Chemistry  

E-Print Network [OSTI]

Quantum algorithms for quantum chemistry map the dynamics of electrons in a molecule to the dynamics of a coupled spin system. To reach chemical accuracy for interesting molecules, a large number of quantum gates must be applied which implies the need for quantum error correction and fault-tolerant quantum computation. Arbitrary fault-tolerant operations can be constructed from a small, universal set of fault-tolerant operations by gate compilation. Quantum chemistry algorithms are compiled by decomposing the dynamics of the coupled spin-system using a Trotter formula, synthesizing the decomposed dynamics using Clifford operations and single-qubit rotations, and finally approximating the single-qubit rotations by a sequence of fault-tolerant single-qubit gates. Certain fault-tolerant gates rely on the preparation of specific single-qubit states referred to as magic states. As a result, gate compilation and magic state distillation are critical for solving quantum chemistry problems on a quantum computer. We review recent progress that has improved the efficiency of gate compilation and magic state distillation by orders of magnitude.

Colin J. Trout; Kenneth R. Brown

2015-01-29T23:59:59.000Z

87

Magic State Distillation and Gate Compilation in Quantum Algorithms for Quantum Chemistry  

E-Print Network [OSTI]

Quantum algorithms for quantum chemistry map the dynamics of electrons in a molecule to the dynamics of a coupled spin system. To reach chemical accuracy for interesting molecules, a large number of quantum gates must be applied which implies the need for quantum error correction and fault-tolerant quantum computation. Arbitrary fault-tolerant operations can be constructed from a small, universal set of fault-tolerant operations by gate compilation. Quantum chemistry algorithms are compiled by decomposing the dynamics of the coupled spin-system using a Trotter formula, synthesizing the decomposed dynamics using Clifford operations and single-qubit rotations, and finally approximating the single-qubit rotations by a sequence of fault-tolerant single-qubit gates. Certain fault-tolerant gates rely on the preparation of specific single-qubit states referred to as magic states. As a result, gate compilation and magic state distillation are critical for solving quantum chemistry problems on a quantum computer. We review recent progress that has improved the efficiency of gate compilation and magic state distillation by orders of magnitude.

Colin J. Trout; Kenneth R. Brown

2015-01-07T23:59:59.000Z

88

Comparison of emissions from on-road sources using a mobile laboratory under various driving and operational sampling modes  

E-Print Network [OSTI]

Mobile sources produce a significant fraction of the total anthropogenic emissions burden in large cities and have harmful effects on air quality at multiple spatial scales. Mobile emissions are intrinsically difficult to ...

Zavala-Perez, Miguel Angel

89

Compiling & Linking | Argonne Leadership Computing Facility  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to User Group and UserofProteinNewsatCompiler ComparisonsEffective Use of

90

Exergy Analysis and Operational Efficiency of a Horizontal Ground Source Heat Pump System Operated in a Low-Energy Test House under Simulated Occupancy Conditions  

SciTech Connect (OSTI)

This paper presents data, analyses, measures of performance, and conclusions for a ground-source heat pump (GSHP) providing space conditioning to a 345m2 house whose envelope is made of structural insulated panels (SIP). The entire thermal load of this SIP house with RSI-3.7 (RUS-21) walls, triple pane windows with a U-factor of 1.64 W/m2 K (0.29 Btu/h ft2 oF) and solar heat gain coefficient (SHGC) of 0.25, a roof assembly with overall thermal resistance of about RSI-8.8 (RUS-50) and low leakage rates of 0.74 ACH at 50Pa was satisfied with a 2.16-Ton (7.56 kW) GSHP unit consuming negligible (9.83kWh) auxiliary heat during peak winter season. The highest and lowest heating COP achieved was 4.90 (October) and 3.44 (February), respectively. The highest and lowest cooling COP achieved was 6.09 (April) and 3.88 (August). These COPs are calculated on the basis of the total power input (including duct, ground loop, and control power losses ). The second Law (Exergy) analysis provides deep insight into how systemic inefficiencies are distributed among the various GSHP components. Opportunities for design and further performance improvements are identified. Through Exergy analysis we provide a true measure of how closely actual performance approaches the ideal, and it unequivocally identifies, better than energy analysis does, the sources and causes of lost work, the root cause of system inefficiencies.

Ally, Moonis Raza [ORNL; Baxter, Van D [ORNL; Munk, Jeffrey D [ORNL; Gehl, Anthony C [ORNL

2012-01-01T23:59:59.000Z

91

Design and Operation of a tunable MeV-level Compton-scattering-based (gamma-ray) source  

SciTech Connect (OSTI)

A mono-energetic gamma-ray (MEGa-ray) source based on Compton-scattering, targeting nuclear physics applications such as nuclear resonance fluorescence, has been constructed and commissioned at Lawrence Livermore National Laboratory. In this paper, the overall architecture of the system, as well as some of the critical design decisions made in the development of the source, are discussed. The performances of the two laser systems (one for electron production, one for scattering), the electron photoinjector, and the linear accelerator are also detailed, and initial {gamma}-ray results are presented.

Gibson, D J; Albert, F; Anderson, S G; Betts, S M; Messerly, M J; Phan, H H; Semenov, V A; Shverdin, M Y; Tremaine, A M; Hartemann, F V; Siders, C W; McNabb, D P; Barty, C P

2009-07-07T23:59:59.000Z

92

Preliminary Retro-Commissioning Study on Optimal Operation for the Heat Source System of a District Heating Cooling Plant  

E-Print Network [OSTI]

Heating Water Suuply Chilled Water Return Heating Water Return To User New System ESL-IC-08-10-57 Proceedings of the Eighth International Conference for Enhanced Building Operations, Berlin, Germany, October 20-22, 2008 2 attract attention due..., R6 450 1, 1 ESL-IC-08-10-57 Proceedings of the Eighth International Conference for Enhanced Building Operations, Berlin, Germany, October 20-22, 2008 3 (one office building and one building with hotel rooms and leisure facilities) since November...

Shingu, H.; Yoshida, H.; Wang, F.; Ono, E.

93

Energy-Efficient GPGPU Architectures via Collaborative Compilation and Memristive  

E-Print Network [OSTI]

Energy-Efficient GPGPU Architectures via Collaborative Compilation and Memristive Memory that exploit data-parallelism the most energy-efficient form of parallelism. Unfortunately, technology scaling

Liebling, Michael

94

Formal Semantics, Compilation and Execution of the GALS  

E-Print Network [OSTI]

programming, dynamic reconfiguration, weak mobility, formal model of computation, semantics, CSP, -calculus only a partial formal semantics. We believe that formal semantics is essential for faithful compilation

Paris-Sud XI, Universit de

95

Internal combustion engines for alcohol motor fuels: a compilation of background technical information  

SciTech Connect (OSTI)

This compilation, a draft training manual containing technical background information on internal combustion engines and alcohol motor fuel technologies, is presented in 3 parts. The first is a compilation of facts from the state of the art on internal combustion engine fuels and their characteristics and requisites and provides an overview of fuel sources, fuels technology and future projections for availability and alternatives. Part two compiles facts about alcohol chemistry, alcohol identification, production, and use, examines ethanol as spirit and as fuel, and provides an overview of modern evaluation of alcohols as motor fuels and of the characteristics of alcohol fuels. The final section compiles cross references on the handling and combustion of fuels for I.C. engines, presents basic evaluations of events leading to the use of alcohols as motor fuels, reviews current applications of alcohols as motor fuels, describes the formulation of alcohol fuels for engines and engine and fuel handling hardware modifications for using alcohol fuels, and introduces the multifuel engines concept. (LCL)

None

1980-11-01T23:59:59.000Z

96

A compilation of reports of the Advisory Committee on Reactor Safeguards. 1994 annual. Volume 16  

SciTech Connect (OSTI)

This compilation contains 30 ACRS reports submitted to the Commission, or to the Executive Director for Operations, during calendar year 1994. It also includes a report to the Congress on the NRC Safety Research Program. All reports have been made available to the public through the NRC Public Document Room and the U.S. Library of Congress. The reports are categorized by the most appropriate generic subject area and by chronological order within subject area.

NONE

1995-04-01T23:59:59.000Z

97

A compilation of reports of the Advisory Committee on Reactor Safeguards: 1993 annual. Volume 15  

SciTech Connect (OSTI)

This compilation contains 47 ACRS reports submitted to the Commission, Executive Director for Operations, or to the Office of Nuclear Regulatory Research, during calendar year 1993. It also includes a report to the Congress on the NRC Safety Research Program. All reports have been made available to the public through the NRC Public Document Room and the US Library of Congress. The reports are categorized by the most appropriate generic subject area and by chronological order within subject area.

Not Available

1994-04-01T23:59:59.000Z

98

A compilation of reports of the Advisory Committee on nuclear waste, July 1996--June 1997  

SciTech Connect (OSTI)

This compilation contains 11 reports issued by the Advisory Committee on Nuclear Waste (ACNW) during the ninth year of its operation. The reports were submitted to the Chairman and Commissioners of the U.S. Nuclear Regulatory Commission. All reports prepared by the Committee have been made available to the public through the NRC Public Document Room, the U.S. Library of Congress, and the internet at http://www.nrc.gov/ACRSACNW.

NONE

1997-08-01T23:59:59.000Z

99

,"Plant","Primary Energy Source","Operating Company","Net Summer Capacity (MW)"  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National and Regional Data; Row: NAICS Codes; Column: EnergyShale ProvedTexas" ,"Plant","Primary Energy Source","Operating

100

FU, CHAO-YING Compiler-Driven Value Speculation Scheduling.  

E-Print Network [OSTI]

ABSTRACT FU, CHAO-YING Compiler-Driven Value Speculation Scheduling. (Under the direction of Prof inputs. #12;COMPILER-DRIVEN VALUE SPECULATION SCHEDULING by CHAO-YING FU A dissertation submitted of Advisory Committee Prof. Paul D. Franzon Prof. Wentai Liu Prof. Eric Rotenberg #12;ii Biography Chao-ying

Conte, Thomas M.

Note: This page contains sample records for the topic "operations sources compiled" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

ORC2DSP: Compiler Infrastructure Supports for VLIW DSP Processors  

E-Print Network [OSTI]

ORC2DSP: Compiler Infrastructure Supports for VLIW DSP Processors Cheng-Wei Chen, Chung-Lin Tang our experiences in deploying ORC infrastructures for a novel 32-bit VLIW DSP processor (known as PAC. We also present methods in retargeting ORC compilers for PAC VLIW DSP processors. In addition

Lee, Jenq-Kuen

102

Submitted by the Faculty Compiled by the  

E-Print Network [OSTI]

by various Department of Defense activities, Federal Government agencies, and non-government agencies, Information Science, Operations Research, Aeronautics and Astronautics, Electrical and Computer Engineering

103

Compilation of fission product yields Vallecitos Nuclear Center  

SciTech Connect (OSTI)

This document is the ninth in a series of compilations of fission yield data made at Vallecitos Nuclear Center in which fission yield measurements reported in the open literature and calculated charge distributions have been utilized to produce a recommended set of yields for the known fission products. The original data with reference sources, as well as the recommended yields are presented in tabular form for the fissionable nuclides U-235, Pu-239, Pu-241, and U-233 at thermal neutron energies; for U-235, U-238, Pu-239, and Th-232 at fission spectrum energies; and U-235 and U-238 at 14 MeV. In addition, U-233, U-236, Pu-240, Pu-241, Pu-242, Np-237 at fission spectrum energies; U-233, Pu-239, Th-232 at 14 MeV and Cf-252 spontaneous fission are similarly treated. For 1979 U234F, U237F, Pu249H, U234He, U236He, Pu238F, Am241F, Am243F, Np238F, and Cm242F yields were evaluated. In 1980, Th227T, Th229T, Pa231F, Am241T, Am241H, Am242Mt, Cm245T, Cf249T, Cf251T, and Es254T are also evaluated.

Rider, B.F.

1980-01-01T23:59:59.000Z

104

Compiling Utility Requirements For New Nuclear Power Plant Project  

SciTech Connect (OSTI)

Teollisuuden Voima Oy (TVO) submitted in November 2000 to the Finnish Government an application for a Decision-in-Principle concerning the construction of a new nuclear power plant in Finland. The actual investment decision can be made first after a positive decision has been made by the Government and the Parliament. Parallel to the licensing process, technical preparedness has been upheld so that the procurement process can be commenced without delay, when needed. This includes the definition of requirements for the plant and preliminary preparation of bid inquiry specifications. The core of the technical requirements corresponds to the specifications presented in the European Utility Requirement (EUR) document, compiled by major European electricity producers. Quite naturally, an amount of modifications to the EUR document are needed that take into account the country- and site-specific conditions as well as the experiences gained in the operation of the existing NPP units. Along with the EUR-related requirements concerning the nuclear island and power generation plant, requirements are specified for scope of supply as well as for a variety of issues related to project implementation. (author)

Patrakka, Eero [Teollisuuden Voima Oy, 27160 Olkiluoto (Finland)

2002-07-01T23:59:59.000Z

105

Correlation between simulations and cavitation-induced erosion damage in Spallation Neutron Source target modules after operation  

SciTech Connect (OSTI)

An explicit finite element (FE) technique developed for estimating dynamic strain in the Spallation Neutron Source (SNS) mercury target module vessel is now providing insight into cavitation damage patterns observed in used targets. The technique uses an empirically developed material model for the mercury that describes liquid-like volumetric stiffness combined with a tensile pressure cut-off limit that approximates cavitation. The longest period each point in the mercury is at the tensile cut-off threshold is denoted its saturation time. Now, the pattern of saturation time can be obtained from these simulations and is being positively correlated with observed damage patterns and is interpreted as a qualitative measure of damage potential. Saturation time has been advocated by collaborators at J-Parc as a factor in predicting bubble nuclei growth and collapse intensity. The larger the ratio of maximum bubble size to nucleus, the greater the bubble collapse intensity to be expected; longer saturation times result in greater ratios. With the recent development of a user subroutine for the FE solver saturation time is now provided over the entire mercury domain. Its pattern agrees with spots of damage seen above and below the beam axis on the SNS inner vessel beam window and elsewhere. The other simulation result being compared to observed damage patterns is mercury velocity at the wall. Related R&D has provided evidence for the damage mitigation that higher wall velocity provides. In comparison to observations in SNS targets, inverse correlation of high velocity to damage is seen. In effect, it is the combination of the patterns of saturation time and low velocity that seems to match actual damage patterns.

Riemer, Bernie [ORNL] [ORNL; McClintock, David A [ORNL] [ORNL; Kaminskas, Saulius [ORNL] [ORNL; Abdou, Ashraf A [ORNL] [ORNL

2014-01-01T23:59:59.000Z

106

Invoking any Intel compiler with -g defaults to -O2 optimization...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Invoking any Intel compiler with a Cray wrapper with -g defaults to -O2 optimization contrary to the Intel compiler man pages Invoking any Intel compiler with a Cray wrapper with...

107

Compiling and optimizing spreadsheets for FPGA and multicore execution  

E-Print Network [OSTI]

A major barrier to developing systems on multicore and FPGA chips is an easy-to-use development environment. This thesis presents the RhoZeta spreadsheet compiler and Catalyst optimization system for programming multiprocessors ...

Hirsch, Amir

2007-01-01T23:59:59.000Z

108

University Climatological Station Compiled by Erwin Wodarczak (1998)  

E-Print Network [OSTI]

University Climatological Station Committee fonds Compiled by Erwin Wodarczak (1998) #12;Fonds Description University Climatological Station Committee fonds. ­ 1961-1974. 3 cm of textual records. Administrative History In 1954 a President's Climatological Station Committee was established

Handy, Todd C.

109

Validated Constraint Compilation Timothy J. Hickey David K. Wittenberg  

E-Print Network [OSTI]

Validated Constraint Compilation Timothy J. Hickey David K. Wittenberg Technical Report CS­99 on minimizing it [Wil63, Act96, Tay97]. By using interval constraints, we don't eliminate roundoff error, but we

Hickey, Timothy J.

110

A Compiled Simulator for MOS Circuits \\Lambda Randal E. Bryant  

E-Print Network [OSTI]

COSMOS: A Compiled Simulator for MOS Circuits \\Lambda Randal E. Bryant Derek Beatty y Karl Brace by anamos. Bryant---COSMOS Page 1 #12; Transistor Network Functional Elements ANAMOS Boolean Descriptions

Bryant, Randal E.

111

CODESSEAL: Compiler/FPGA Approach to Secure Applications  

E-Print Network [OSTI]

CODESSEAL: Compiler/FPGA Approach to Secure Applications Olga Gelbart1 , Paul Ott1 , Bhagirath- mation technologies. Software protection, particularly for security appli- cations, has become - CODESSEAL - for software protection for fully encrypted execution in which both program and data

Kuzmanovic, Aleksandar

112

Landscape Architecture Program Compiled by Beth Pitblado (1991)  

E-Print Network [OSTI]

Landscape Architecture Program fonds Compiled by Beth Pitblado (1991) *** Institutional records Notes File List Catalogue entry (UBC Library catalogue) #12;Fonds Description Landscape Architecture Program fonds. - 1980-1991. 13 cm of textual materials. Administrative History The Landscape Architecture

Handy, Todd C.

113

Experimental demonstration of differing impacts of pulsed and continuous operation of a deuterium-tritium neutron source on induced radioactivity in the context of ITER  

SciTech Connect (OSTI)

The work reported herein was conducted in response to an ITER Task to demonstrate experimentally that pulsed and continous operations of a D-T neutron source lead, in general, to differing impacts on inventory of induced radioactivity, on one hand, and to verify calculational methods, on the other. In a series of experiments conducted for the purpose, half lives of observed radioisotopes varied from 1 minute ({sup 25}Na) to 271 days ({sup 57}Co). Relatively short pulse lengths, 1 minute to 3 minute duration, were chosen. A pneumatic transport system was employed to transport foils of niobium, iron, aluminum, vanadium, nickel, and magnesium for irradiation close to the D-T neutron source. Three duty factors and two kinds of power levels were used for various neutron pulse trains. The experimental data was processed to obtain ratio of inventories in pulsed to continuous operation scenarios for each of the observed radioisotope. We observe a large reduction in radioactive inventories for values of t{sub 1/2}/p (half life/pulse duration) lying in the range of 1 to 10. Interestingly, random power pulse trains show even larger reduction in radioactive inventory: the ratio of inventories drops to approx.0.14 for t{sub 1/2}/p = 3.15 ({sup 27}Mg) for a duty factor of 20% and a train of 10 pulses, whereas it would have hit a minimum of 0.33 for t{sub 1/2}/p = 3.53 for constant power level. 14 refs., 10 figs., 1 tab.

Kumar, A.; Youssef, M.Z.; Abdou, M.A. [Univ. of California, Los Angeles, CA (United States); Ikeda, Yujiro; Uno, Yoshitomo; Maekawa, Hiroshi [Japan Atomic Energy Research Inst., Ibaraki (Japan)

1996-12-31T23:59:59.000Z

114

FINDING PERSISTENT SOURCES WITH THE BeppoSAX/WIDE FIELD CAMERA: AN IN-DEPTH ANALYSIS  

SciTech Connect (OSTI)

During the operational life of the Italian/Dutch X-ray satellite (1996-2002), BeppoSAX, its two Wide Field Cameras (WFCs) performed observations that covered the full sky at different epochs. Although the majority of analysis performed on BeppoSAX WFC data concentrated on the detection of transient sources, we have now applied the same techniques developed for the INTEGRAL/IBIS survey to produce the same work with the BeppoSAX WFC data. This work represents the first unbiased source list compilation produced from the overall WFC data set optimized for faint persistent source detection. This approach recovered 182 more sources compared to the previous WFC catalog reported in Verrecchia et al. The catalog contains 404 sources detected between 3 and 17 keV, 10 of which are yet to be seen by the new generation of telescopes.

Capitanio, F.; Fiocchi, M.; Ubertini, P. [INAF IASF-Roma, Via Fosso del Cavaliere 100, 00033 Rome (Italy); Bird, A. J. [School of Physics and Astronomy, University of Southampton, Highfield, Southampton SO17 1BJ (United Kingdom); Scaringi, S. [Department of Astrophysics, Radboud University Nijmegen, P.O. Box 9010, 6500 GL Nijmegen (Netherlands)

2011-07-01T23:59:59.000Z

115

Measured Performance and Analysis of Ground Source Heat Pumps for Space Conditioning and for Water Heating in a Low-Energy Test House Operated under Simulated Occupancy Conditions  

SciTech Connect (OSTI)

In this paper we present measured performance and efficiency metrics of Ground Source Heat Pumps (GSHPs) for space conditioning and for water heating connected to a horizontal ground heat exchanger (GHX) loop. The units were installed in a 345m2 (3700ft2) high-efficiency test house built with structural insulated panels (SIPs), operated under simulated occupancy conditions, and located in Oak Ridge, Tennessee (USA) in US Climate Zone 4 . The paper describes distinctive features of the building envelope, ground loop, and equipment, and provides detailed monthly performance of the GSHP system. Space conditioning needs of the house were completely satisfied by a nominal 2-ton (7.0 kW) water-to-air GSHP (WA-GSHP) unit with almost no auxiliary heat usage. Recommendations for further improvement through engineering design changes are identified. The comprehensive set of data and analyses demonstrate the feasibility and practicality of GSHPs in residential applications and their potential to help achieve source energy and greenhouse gas emission reduction targets set under the IECC 2012 Standard.

Ally, Moonis Raza [ORNL] [ORNL; Munk, Jeffrey D [ORNL] [ORNL; Baxter, Van D [ORNL] [ORNL; Gehl, Anthony C [ORNL] [ORNL

2012-01-01T23:59:59.000Z

116

A Source-level MATLAB Transformer for DSP Applications  

E-Print Network [OSTI]

Source-level MATLAB Transformer, Arun Chauhan, Indiana University SIP 2004-08-24 #12;Compiler Components-level MATLAB Transformer, Arun Chauhan, Indiana University SIP 2004-08-24 #12;Compiler Components Parser to express transformations of interest Can specify type-based specializations Powerful enough to specify

Chauhan, Arun

117

Evaluation and compilation of fission product yields 1993  

SciTech Connect (OSTI)

This document is the latest in a series of compilations of fission yield data. Fission yield measurements reported in the open literature and calculated charge distributions have been used to produce a recommended set of yields for the fission products. The original data with reference sources, and the recommended yields axe presented in tabular form. These include many nuclides which fission by neutrons at several energies. These energies include thermal energies (T), fission spectrum energies (F), 14 meV High Energy (H or HE), and spontaneous fission (S), in six sets of ten each. Set A includes U235T, U235F, U235HE, U238F, U238HE, Pu239T, Pu239F, Pu241T, U233T, Th232F. Set B includes U233F, U233HE, U236F, Pu239H, Pu240F, Pu241F, Pu242F, Th232H, Np237F, Cf252S. Set C includes U234F, U237F, Pu240H, U234HE, U236HE, Pu238F, Am241F, Am243F, Np238F, Cm242F. Set D includes Th227T, Th229T, Pa231F, Am241T, Am241H, Am242MT, Cm245T, Cf249T, Cf251T, Es254T. Set E includes Cf250S, Cm244S, Cm248S, Es253S, Fm254S, Fm255T, Fm256S, Np237H, U232T, U238S. Set F includes Cm243T, Cm246S, Cm243F, Cm244F, Cm246F, Cm248F, Pu242H, Np237T, Pu240T, and Pu242T to complete fission product yield evaluations for 60 fissioning systems in all. This report also serves as the primary documentation for the second evaluation of yields in ENDF/B-VI released in 1993.

England, T.R.; Rider, B.F.

1995-12-31T23:59:59.000Z

118

A compilation of reports of the Advisory Committee on Reactor Safeguards: 1995 annual. Volume 17  

SciTech Connect (OSTI)

This compilation contains 44 ACRS reports submitted to the Commission, or to the Executive Director for Operations, during calendar year 1995. It also includes a report to the Congress on the NRC Safety Research Program. All reports have been made available to the public through the NRC Public Document Room and the US Library of Congress. The reports are divided into two groups: Part 1: ACRS Reports on Project Reviews, and Part 2: ACRS Reports on Generic Subjects. Part 1 contains ACRS reports by project name and by chronological order within project name. Part 2 categorizes the reports by the most appropriate generic subject area and by chronological order within subject area.

NONE

1996-04-01T23:59:59.000Z

119

A compilation of reports of the Advisory Committee on reactor safeguards. 1996 Annual report  

SciTech Connect (OSTI)

This compilation contains 47 ACRS reports submitted to the Commission, or to the Executive Director for Operations, during calendar year 1996. It also includes a report to the Congress on the NRC Safety Research Program. All reports have been made available to the public through the NRC Public Document Room, the U.S. Library of Congress, and the Internet at http://www.nrc.gov/ACRSACNW. The reports are divided into two groups: Part 1 contains ACRS reports by project name and by chronological order within project name. Part 2 categorizes the reports by the most appropriate generic subject area and by chronological order within subject area.

NONE

1997-04-01T23:59:59.000Z

120

Byfl: Compiler-based Application Analysis  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAboutScienceCareersEnergy,ServicesBurningOperationsBusy Week MayByBy

Note: This page contains sample records for the topic "operations sources compiled" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Compilation of current high-energy-physics experiments  

SciTech Connect (OSTI)

This is the third edition of a compilation of current high energy physics experiments. It is a collaborative effort of the Berkeley Particle Data Group, the SLAC library, and ten participating laboratories: Argonne (ANL), Brookhaven (BNL), CERN, DESY, Fermilab (FNAL), the Institute for Nuclear Study, Tokyo (INS), KEK, Rutherford (RHEL), Serpukhov (SERP), and SLAC. The compilation includes summaries of all high energy physics experiments at the above laboratories that (1) were approved (and not subsequently withdrawn) before about January 1980, and (2) had not completed taking of data by 1 January 1976.

Wohl, C.G.; Kelly, R.L.; Armstrong, F.E.

1980-04-01T23:59:59.000Z

122

Automated Vulnerability Detection for Compiled Smart Grid Software  

SciTech Connect (OSTI)

While testing performed with proper experimental controls can provide scientifically quantifiable evidence that software does not contain unintentional vulnerabilities (bugs), it is insufficient to show that intentional vulnerabilities exist, and impractical to certify devices for the expected long lifetimes of use. For both of these needs, rigorous analysis of the software itself is essential. Automated software behavior computation applies rigorous static software analysis methods based on function extraction (FX) to compiled software to detect vulnerabilities, intentional or unintentional, and to verify critical functionality. This analysis is based on the compiled firmware, takes into account machine precision, and does not rely on heuristics or approximations early in the analysis.

Prowell, Stacy J [ORNL; Pleszkoch, Mark G [ORNL; Sayre, Kirk D [ORNL; Linger, Richard C [ORNL

2012-01-01T23:59:59.000Z

123

Incorporating application semantics and control into compilation Dawson R. Engler  

E-Print Network [OSTI]

and to have their transformations (automatically) optimized as any other code. 1 Introduction This paper the power to transform the code has been reserved for compil­ ers. Our belief is that giving programmers of optimization and code transformations. This paper presents ten such extensions and sketches of many more

124

BNL-68198-AB COMPILATION OF INVENTORIES OF INDUSTRIAL EMISSIONS  

E-Print Network [OSTI]

BNL-68198-AB COMPILATION OF INVENTORIES OF INDUSTRIAL EMISSIONS Carmen M. Benkovitz Atmospheric-5000 March 2001 To be presented at the International Workshop on Emissions ofChemical Species and Aerosols perspectives accurate inventories of emissions of the trace species at the appropriate spatial, temporal

125

Ken MacDonald Compiled by Tracey Krause (2007)  

E-Print Network [OSTI]

Ken MacDonald fonds Compiled by Tracey Krause (2007) University of British Columbia Archives #12 Description Ken MacDonald fonds. - 1993-2006. Biographical Sketch Ken MacDonald is an award-winning Vancouver-on-the-Lake, and an opera at the Banff Centre. MacDonald is a frequent collaborator with director Morris Panych, and has

Handy, Todd C.

126

John B. Macdonald Compiled by Christopher Hives (2005)  

E-Print Network [OSTI]

John B. Macdonald fonds Compiled by Christopher Hives (2005) Last revised August 2013 University Description John B. Macdonald fonds. ­ 1962-1967. 15 cm of textual records. Biographical Sketch The University of British Columbia's fourth president, John Barfoot Macdonald, was born in Toronto on February 23, 1918

Handy, Todd C.

127

Marjorie V. Smith Compiled by Margot St. Louis (1979)  

E-Print Network [OSTI]

Marjorie V. Smith fonds Compiled by Margot St. Louis (1979) Revised by Erwin Wodarczak (2004 Catalogue entry (UBC Library catalogue) #12; Fonds Description Marjorie V. Smith fonds. ­ 19581973 Marjorie V. Smith was the program director for the Aging and Human Relations Division at UBC's Centre

Handy, Todd C.

128

Dorothy Blakey Smith Compiled by April Haddad (1980)  

E-Print Network [OSTI]

Dorothy Blakey Smith fonds Compiled by April Haddad (1980) Last revised October 2012 University (UBC Library catalogue) #12;Fonds Description Dorothy Blakey Smith fonds. ­ 1919-1978. 72 cm of textual records. 78 photographs. Biographical Sketch Born in Leeds, England, Dorothy Blakey Smith immigrated

Handy, Todd C.

129

Michael Smith Compiled by Christopher Hives (2001, 2005)  

E-Print Network [OSTI]

Michael Smith fonds Compiled by Christopher Hives (2001, 2005) University of British Columbia File List Catalogue entry (UBC Library catalogue) #12;Fonds Description Michael Smith fonds. ­ 1957 University of British Columbia faculty member and Nobel prize winner Michael Smith (1932-2000) was born

Handy, Todd C.

130

Compilation and Synthesis for RealTime Embedded Controllers  

E-Print Network [OSTI]

Compilation and Synthesis for Real­Time Embedded Controllers Martin Fr?anzle 1 and Markus M?uller­Olm.Fraenzle@Informatik.Uni­Oldenburg.DE 2 University of Dortmund, Department of Computer Science, FB 4, LS 5, 44221 Dortmund, Germany Markus.Mueller­Olm

Müller-Olm, Markus

131

Compilation and Synthesis for Real-Time Embedded Controllers  

E-Print Network [OSTI]

Compilation and Synthesis for Real-Time Embedded Controllers Martin Fr¨anzle1 and Markus M¨uller-Olm.Fraenzle@Informatik.Uni-Oldenburg.DE 2 University of Dortmund, Department of Computer Science, FB 4, LS 5, 44221 Dortmund, Germany Markus.Mueller-Olm

Müller-Olm, Markus

132

Frederic Wood Compiled by Michael W. Pidgeon (1985)  

E-Print Network [OSTI]

Frederic Wood fonds Compiled by Michael W. Pidgeon (1985) University of British Columbia Archives Description Frederic Wood fonds. ­ 1915-1973. 33 cm of textual records. 22 photographs. Biographical Sketch Born in Victoria, B.C., Frederic Gordon Campbell Wood (1887-1976) enrolled in the first class

Handy, Todd C.

133

BILL HAMILTON AT SCHOOL 1949 1954 compiled by Martin Jacoby  

E-Print Network [OSTI]

1 BILL HAMILTON AT SCHOOL 1949 ­ 1954 compiled by Martin Jacoby Bill and I this letter to selected school contemporaries: W. D. Hamilton at Tonbridge School Dear [surname, to avoid 50 years ago. You probably know that Bill Hamilton (Smythe House 19493 ­ 19543 ) was one of the most

Amrhein, Valentin

134

Francis Henry Johnson Compiled by Betty Hemstock (1979)  

E-Print Network [OSTI]

Francis Henry Johnson fonds Compiled by Betty Hemstock (1979) Revised November, 2010 University;Fonds Description Francis Henry Johnson fonds. ­ 1946-1973. 26 cm of textual records. 1 audio cassette (30 min). Biographical Sketch Francis Henry Johnson was born in London, Ontario. After teaching

Handy, Todd C.

135

Faculty of Forestry Compiled by Christopher Hives (1986, 2005)  

E-Print Network [OSTI]

Faculty of Forestry fonds Compiled by Christopher Hives (1986, 2005) Revised November, 2010 of Forestry. -- 1967-1968. o Miscellaneous Material. -- 1968-1979. o University Research Forest Material Description Faculty of Forestry fonds. ­ 1937-1995. 4.34 m of textual records. Administrative History In 1921

Handy, Todd C.

136

First-time comprehensive list compiles world's petrochemical catalysts  

SciTech Connect (OSTI)

This paper presents compilation of catalysts used in petrochemical and related processes. This is the result of an extensive survey of the world's catalyst manufacturers and suppliers and covers catalysts for the production of olefins and aromatics derivatives, aromatics themselves, and synthesis gas components. More than 300 catalysts from 18 different suppliers are included in the report.

Corbett, R.A.

1988-10-10T23:59:59.000Z

137

CompilerDirected Dynamic Voltage Scaling Based on Program Regions  

E-Print Network [OSTI]

­ ded and portable devices but also for high­end computer systems [23]. Minimizing the power discusses the design and implementation of the first compiler that optimizes programs for power and energy With the advances in technology, power is becoming a first­class architecture design constraint not only for embed

Kremer, Ulrich

138

Cotton Insect Losses 1983 Compiled for National Cotton Council  

E-Print Network [OSTI]

Cotton Insect Losses 1983 Compiled for National Cotton Council Robert B. Head, Coordinator consultants and other personnel associated with cotton production. The Cotton Foundation provided funds their respective areas. Table 1 Alabama Cotton Insect Losses for 1983 Loss attributable to: Percent Bales Boll

Ray, David

139

Cotton Insect Losses 1991 Compiled for National Cotton Council  

E-Print Network [OSTI]

Cotton Insect Losses 1991 Compiled for National Cotton Council Robert B. Head, Chairman Cooperative to have produced the greatest pest related losses in U. S. cotton in 1991. Aphid losses reported at 2. This is true for sweet potato whiteflies. These insects have been pests of cotton in California and Arizona

Ray, David

140

Department of Poultry Science Compiled by Alan Doyle (2002)  

E-Print Network [OSTI]

Department of Poultry Science fonds Compiled by Alan Doyle (2002) Revised December, 2010-series o Purchase Order series o Poultry Farm Sales series o Research / Research Funding series o Seminars Department of Poultry Science fonds. ­ 1974-1980. 26 cm of textual records. Administrative History

Handy, Todd C.

Note: This page contains sample records for the topic "operations sources compiled" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Office of Analysis and Evaluation of Operational Data 1989 annual report, Power reactors  

SciTech Connect (OSTI)

The annual report of the US Nuclear Regulatory Commission's Office for Analysis and Evaluation of Operational Data (AEOD) is devoted to the activities performed during 1989. The report is published in two separate parts. This document, NUREG-1272, Vol. 4, No. 1, covers power reactors and presents an overview of the operating experience of the nuclear power industry from the NRC perspective, including comments about the trends of some key performance measures. The report also includes the principal findings and issues identified in AEOD studies over the past year and summarizes information from such sources as licensee event reports, diagnostic evaluations, and reports to the NRC's Operations Center. This report also compiles the status of staff actions resulting from previous Incident Investigation Team (IIT) reports. 16 figs., 9 tabs.

None

1990-07-01T23:59:59.000Z

142

Safety of Compilers and Translation Techniques -Status quo of Technology and Science  

E-Print Network [OSTI]

, Modelica, or others into either machine code or into code of another HLL. In the latter case, the compiler

Hofstedt, Petra

143

MaJIC: a Matlab Just-In-time Compiler ? George Almasi and David A. Padua  

E-Print Network [OSTI]

MaJIC: a Matlab Just-In-time Compiler ? George Almasi and David A. Padua galmasi experience with MaJIC, a just-in- time compiler for MATLAB. In the recent past, several compiler projects claimed large performance improvements when processing MATLAB code. Most of these projects are static

Padua, David

144

Compiling Language Definitions: The ASF+SDF M. G. J. VAN DEN BRAND  

E-Print Network [OSTI]

Compiling Language Definitions: The ASF+SDF Compiler M. G. J. VAN DEN BRAND CWI and Vrije Universiteit J. HEERING CWI P. KLINT CWI and University of Amsterdam and P. A. OLIVIER CWI The ASF+SDF Meta of the rewrite rule implementation. The ASF+SDF rewrite rule compiler generates C code, thus taking advantage

Klint, Paul

145

Compilation and Synthesis for RealTime Embedded Controllers  

E-Print Network [OSTI]

Compilation and Synthesis for Real­Time Embedded Controllers Martin Fr?anzle 1 and Markus M?uller­Olm.Fraenzle@Informatik.Uni­Oldenburg.DE 2 University of Dortmund, Department of Computer Science, FB 4, LS 5, 44221 Dortmund, Germany Markus.Mueller­Olm?anzle and Markus M?uller­Olm non­digital nature, i.e. these systems belong to the class of real­time embedded

146

Using Information from Operating Experience to Inform Human Reliability Analysis  

SciTech Connect (OSTI)

This paper reports on efforts being sponsored by the U.S. NRC and performed by INEEL to develop a technical basis and perform work to extract information from sources for use in HRA. The objectives of this work are to: 1) develop a method for conducting risk-informed event analysis of human performance information that stems from operating experience at nuclear power plants and for compiling and documenting the results in a structured manner; 2) provide information from these analyses for use in risk-informed and performance-based regulatory activities; 3) create methods for information extraction and a repository for this information that, likewise, support HRA methods and their applications.

Bruce P. Hallbert; David I. Gertman; Julie Marble; Erasmia Lois; Nathan Siu

2004-06-01T23:59:59.000Z

147

Finding of No Significant Impact and Final Environmental Assessment for the Future Location of Heat Source/Radioisotope Power System Assembly and Testing and Operations Currently Located at the Mound Site  

SciTech Connect (OSTI)

The U.S. Department of Energy (the Department) has completed an Environmental Assessment for the Future Location of the Heat Source/Radioisotope Power System Assembly and Test. Operations Currently Located at the Mound Site. Based on the analysis in the environmental assessment, the Department has determined that the proposed action, the relocation of the Department's heat source and radioisotope power system operations, does not constitute a major Federal action significantly affecting the quality of the human environment within the meaning of the ''National Environmental Policy Act'' of 1969 (NEPA). Therefore, the preparation of an Environmental Impact Statement is not required, and the Department is issuing this Finding of No Significant Impact (FONSI).

N /A

2002-08-30T23:59:59.000Z

148

Compiling and Linking FAQ | Argonne Leadership Computing Facility  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed New SubstationCleanCommunity Involvement andMISR, and4 N Overview of How to Compile

149

Analysis of accident sequences and source terms at treatment and storage facilities for waste generated by US Department of Energy waste management operations  

SciTech Connect (OSTI)

This report documents the methodology, computational framework, and results of facility accident analyses performed for the US Department of Energy (DOE) Waste Management Programmatic Environmental Impact Statement (WM PEIS). The accident sequences potentially important to human health risk are specified, their frequencies assessed, and the resultant radiological and chemical source terms evaluated. A personal-computer-based computational framework and database have been developed that provide these results as input to the WM PEIS for the calculation of human health risk impacts. The WM PEIS addresses management of five waste streams in the DOE complex: low-level waste (LLW), hazardous waste (HW), high-level waste (HLW), low-level mixed waste (LLMW), and transuranic waste (TRUW). Currently projected waste generation rates, storage inventories, and treatment process throughputs have been calculated for each of the waste streams. This report summarizes the accident analyses and aggregates the key results for each of the waste streams. Source terms are estimated, and results are presented for each of the major DOE sites and facilities by WM PEIS alternative for each waste stream. Key assumptions in the development of the source terms are identified. The appendices identify the potential atmospheric release of each toxic chemical or radionuclide for each accident scenario studied. They also discuss specific accident analysis data and guidance used or consulted in this report.

Mueller, C.; Nabelssi, B.; Roglans-Ribas, J.; Folga, S.; Policastro, A.; Freeman, W.; Jackson, R.; Mishima, J.; Turner, S.

1996-12-01T23:59:59.000Z

150

DATA SOURCES AND COMPILATION By T.R. Klett and Thomas S. Ahlbrandt  

E-Print Network [OSTI]

History................................................ DS-5 Reserve Growth data for the volumetric assessments of undiscovered oil and gas resources. Geological, geochemical

Laughlin, Robert B.

151

Report on the international workshop on cold moderators for pulsed neutron sources.  

SciTech Connect (OSTI)

The International Workshop on Cold Moderators for Pulsed Neutron Sources resulted from the coincidence of two forces. Our sponsors in the Materials Sciences Branch of DOE's Office of Energy Research and the community of moderator and neutron facility developers both realized that it was time. The Neutron Sources Working Group of the Megascience Forum of the Organization for Economic Cooperation and Development offered to contribute its support by publishing the proceedings, which with DOE and Argonne sponsorship cemented the initiative. The purposes of the workshop were: to recall and improve the theoretical groundwork of time-dependent neutron thermalization; to pose and examine the needs for and benefits of cold moderators for neutron scattering and other applications of pulsed neutron sources; to summarize experience with pulsed source, cold moderators, their performance, effectiveness, successes, problems and solutions, and the needs for operational data; to compile and evaluate new ideas for cold moderator materials and geometries; to review methods of measuring and characterizing pulsed source cold moderator performance; to appraise methods of calculating needed source characteristics and to evaluate the needs and prospects for improvements; to assess the state of knowledge of data needed for calculating the neutronic and engineering performance of cold moderators; and to outline the needs for facilities for testing various aspects of pulsed source cold moderator performance.

Carpenter, J. M.

1999-01-06T23:59:59.000Z

152

Supplemental analysis of accident sequences and source terms for waste treatment and storage operations and related facilities for the US Department of Energy waste management programmatic environmental impact statement  

SciTech Connect (OSTI)

This report presents supplemental information for the document Analysis of Accident Sequences and Source Terms at Waste Treatment, Storage, and Disposal Facilities for Waste Generated by US Department of Energy Waste Management Operations. Additional technical support information is supplied concerning treatment of transuranic waste by incineration and considering the Alternative Organic Treatment option for low-level mixed waste. The latest respirable airborne release fraction values published by the US Department of Energy for use in accident analysis have been used and are included as Appendix D, where respirable airborne release fraction is defined as the fraction of material exposed to accident stresses that could become airborne as a result of the accident. A set of dominant waste treatment processes and accident scenarios was selected for a screening-process analysis. A subset of results (release source terms) from this analysis is presented.

Folga, S.; Mueller, C.; Nabelssi, B.; Kohout, E.; Mishima, J.

1996-12-01T23:59:59.000Z

153

Bevis Made Easy: A Humanistic Existentialism Philosophy First Compiled by Dr. D. Foley, 2003  

E-Print Network [OSTI]

Bevis Made Easy: A Humanistic Existentialism Philosophy First Compiled by Dr. D. Foley, 2003 ­ collective communities and identified by common characteristics, environment, target health risk threat, need

154

Nuclear fuel cycle risk assessment: survey and computer compilation of risk-related literature. [Once-through Cycle and Plutonium Recycle  

SciTech Connect (OSTI)

The US Nuclear Regulatory Commission has initiated the Fuel Cycle Risk Assessment Program to provide risk assessment methods for assistance in the regulatory process for nuclear fuel cycle facilities other than reactors. Both the once-through cycle and plutonium recycle are being considered. A previous report generated by this program defines and describes fuel cycle facilities, or elements, considered in the program. This report, the second from the program, describes the survey and computer compilation of fuel cycle risk-related literature. Sources of available information on the design, safety, and risk associated with the defined set of fuel cycle elements were searched and documents obtained were catalogued and characterized with respect to fuel cycle elements and specific risk/safety information. Both US and foreign surveys were conducted. Battelle's computer-based BASIS information management system was used to facilitate the establishment of the literature compilation. A complete listing of the literature compilation and several useful indexes are included. Future updates of the literature compilation will be published periodically. 760 annotated citations are included.

Yates, K.R.; Schreiber, A.M.; Rudolph, A.W.

1982-10-01T23:59:59.000Z

155

A Compiled Catalogue of Spectroscopically Determined Elemental Abundances for Stars with Accurate Parallaxes. I.Magnesium  

E-Print Network [OSTI]

We present a compiled catalogue of effective temperatures, surface gravities, iron and magnesium abundances, distances, velocity components, and orbital elements for stars in the solar neighborhood. The atmospheric parameters and iron abundances are averages of published values derived from model synthetic spectra for a total of about 2000 values in 80 publications. Our relative magnesium abundances were found from 1412 values in 31 publications for 876 dwarfs and subgiants using a three-step iteration averaging procedure, with weights assigned to each source of data as well as to each individual determination and taking into account systematic deviations of each scale relative to the reduced mean scale. The estimated assumed completeness for data sources containing more than five stars, up to late December 2003, exceeds 90%. For the vast majority of stars in the catalogue, the spatial velocity components were derived from modern high-precision astrometric observations, and their Galactic orbit elements were computed using a three-component model of the Galaxy, consisting of a disk, a bulge, and a massive extended halo.

T. V. Borkova; V. A. Marsakov

2005-03-28T23:59:59.000Z

156

Intense Pulsed Neutron Source: Progress report 1991--1996. 15. Anniversary edition -- Volume 1  

SciTech Connect (OSTI)

The 15th Anniversary Edition of the IPNS Progress Report is being published in recognition of the Intense Pulsed Neutron Source`s first 15 years of successful operation as a user facility. To emphasize the importance of this milestone, the authors have made the design and organization of the report significantly different from previous IPNS Progress Reports. This report consists of two volumes. For Volume 1, authors were asked to prepare articles that highlighted recent scientific accomplishments at IPNS, from 1991 to present; to focus on and illustrate the scientific advances achieved through the unique capabilities of neutron studies performed by IPNS users; to report on specific activities or results from an instrument; or to focus on a body of work encompassing different neutron-scattering techniques. Articles were also included on the accelerator system, instrumentation, computing, target, and moderators. A list of published and ``in press` articles in journals, books, and conference proceedings, resulting from work done at IPNS since 1991, was compiled. This list is arranged alphabetically according to first author. Publication references in the articles are listed by last name of first author and year of publication. The IPNS experimental reports received since 1991 are compiled in Volume 2. Experimental reports referenced in the articles are listed by last name of first author, instrument designation, and experiment number.

Marzec, B. [ed.

1996-05-01T23:59:59.000Z

157

Intense Pulsed Neutron Source: Progress report 1991--1996. 15. Anniversary edition -- Volume 2  

SciTech Connect (OSTI)

The 15th Anniversary Edition of the IPNS Progress Report is being published in recognition of the Intense Pulsed Neutron Source`s first 15 years of successful operation as a user facility. To emphasize the importance of this milestone, the author shave made the design and organization of the report significantly different from previous IPNS Progress Reports. This report consists of two volumes. For Volume 1, authors were asked to prepare articles that highlighted recent scientific accomplishments at IPNS, from 1991 to present; to focus on and illustrate the scientific advances achieved through the unique capabilities of neutron studies performed by IPNS users; to report on specific activities or results from an instrument; or to focus on a body of work encompassing different neutron-scattering techniques. Articles were also included on the accelerator system, instrumentation, computing, target, and moderators. A list of published and ``in press` articles in journals, books, and conference proceedings, resulting from work done at IPNS since 1991, was compiled. This list is arranged alphabetically according to first author. Publication references in the articles are listed by last name of first author and year of publication. The IPNS experimental reports received since 1991 are compiled in Volume 2. Experimental reports referenced in the articles are listed by last name of first author, instrument designation, and experiment number.

NONE

1996-05-01T23:59:59.000Z

158

COMPILATION OF LABORATORY SCALE ALUMINUM WASH AND LEACH REPORT RESULTS  

SciTech Connect (OSTI)

This report compiles and analyzes all known wash and caustic leach laboratory studies. As further data is produced, this report will be updated. Included are aluminum mineralogical analysis results as well as a summation of the wash and leach procedures and results. Of the 177 underground storage tanks at Hanford, information was only available for five individual double-shell tanks, forty-one individual single-shell tanks (e.g. thirty-nine 100 series and two 200 series tanks), and twelve grouped tank wastes. Seven of the individual single-shell tank studies provided data for the percent of aluminum removal as a function of time for various caustic concentrations and leaching temperatures. It was determined that in most cases increased leaching temperature, caustic concentration, and leaching time leads to increased dissolution of leachable aluminum solids.

HARRINGTON SJ

2011-01-06T23:59:59.000Z

159

Cross Section Evaluation Group shielding benchmark compilation. Volume II  

SciTech Connect (OSTI)

At the time of the release of ENDF/B-IV in 1974, the Shielding Subcommittee had identified a series of 12 shielding data testing benchmarks (the SDT series). Most were used in the ENDF/B-IV data testing effort. A new concept and series was begun in the interim, the so-called Shielding Benchmark (SB) series. An effort was made to upgrade the SDT series as far as possible and to add new SB benchmarks. In order to be designated in the SB class, both an experiment and analysis must have been performed. The current recommended benchmark for Shielding Data Testing are listed. Until recently, the philosophy has been to include only citations to published references for shielding benchmarks. It is now our intention to provide adequate information in this volume for proper analysis of any new benchmarks added to the collection. These compilations appear in Section II, with the SB5 Fusion Reactor Shielding Benchmark as the first entry.

Rose, P.F.; Roussin, R.W.

1983-12-01T23:59:59.000Z

160

Calibration and operational data for a compact photodiode detector useful for monitoring the location of moving sources of positron emitting radioisotopes  

SciTech Connect (OSTI)

D-Pace has developed a compact cost-effective gamma detector system based on technology licensed from TRIUMF. These photodiode detectors are convenient for detecting the presence of positron emitting radioisotopes, particularly for the case of transport of radioisotopes from a PET cyclotron to hotlab, or from one location to another in an automated radiochemistry processing unit. This paper describes recent calibration experiments undertaken at the Turku PET Centre for stationary and moving sources of F18 and C11 in standard setups. The practical diagnostic utility of using several of these devices to track the transport of radioisotopes from the cyclotron to hotlab is illustrated. For example, such a detector system provides: a semi-quantitative indication of total activity, speed of transport, location of any activity lost en route and effectiveness of follow-up system flushes, a means of identifying bolus break-up, feedback useful for deciding when to change out tubing.

Marsland, M. G.; Dehnel, M. P.; Theroux, J.; Christensen, T.; Hollinger, C. [D-Pace, Inc. P.O. Box 201, Nelson, B.C., V1L 5P9 (Canada); Johansson, S.; Rajander, J.; Solin, O. [Turku PET Center, Abo Akademi University, Porthansgatan 3, Turku FI-20500 (Finland); Stewart, T. M. [D-Pace, Inc. P.O. Box 201, Nelson, B.C., V1L 5P9 (Canada)

2013-04-19T23:59:59.000Z

Note: This page contains sample records for the topic "operations sources compiled" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Cluster of Gamma-ray Bursts - Image of a Source. Catalog of Clusters (Sources) of Gamma-ray Bursts  

E-Print Network [OSTI]

The clusters of gamma-ray bursts are considered which are assumed to be images of the repeated gamma-ray burst (GRB) sources. It is shown, that localization of the cosmic gamma-ray burst sources (GBS) is determined by the clusters of GRBs. About 100 candidates in sources are presented in the form of the catalog, which is compiled relying on the base of the BATSE data up to middle of 2000. Gamma-ray bursts (from 5 to 13) of a cluster that display a source do not coincide in their position. The catalog table containing basic information about the GRB sources yields the possibility to research the GBS properties and their identification. The birth of GRBs in the clusters allows predicting the appearance of GRBs both in time and space. Most general properties of the supposed GRB sources are discussed. An attempt to compile the first GRB source catalog is made.

A. V. Kuznetsov

2001-11-01T23:59:59.000Z

162

Regulatory and technical reports: (Abstract index journal). Compilation for first quarter 1997, January--March  

SciTech Connect (OSTI)

This compilation consists of bibliographic data and abstracts for the formal regulatory and technical reports issued by the U.S. Nuclear Regulatory Commission (NRC) Staff and its contractors. This compilation is published quarterly and cummulated annually. Reports consist of staff-originated reports, NRC-sponsored conference reports, NRC contractor-prepared reports, and international agreement reports.

Sheehan, M.A.

1997-06-01T23:59:59.000Z

163

Bootstrapping a Modelica Compiler aiming at Modelica 4 Martin Sjlund, Peter Fritzson, Adrian Pop  

E-Print Network [OSTI]

Bootstrapping a Modelica Compiler aiming at Modelica 4 Martin Sjlund, Peter Fritzson, Adrian Pop) of a full-scale EOO (Equa- tion-based Object-Oriented) modeling language such as Modelica. The Modelica language has been mod- eled/implemented in the OpenModelica compiler (OMC) using an extended version

Zhao, Yuxiao

164

AUTOMATIC COMPILING OF HYPSOMETRIC MAP OF A PART OF THE VENUSIAN SURFACE. E.N. Lasarev  

E-Print Network [OSTI]

Raster Grid. The solution of this map is 5x5 km on pixel. The images of the map on Ishtar Terra regionAUTOMATIC COMPILING OF HYPSOMETRIC MAP OF A PART OF THE VENUSIAN SURFACE. E.N. Lasarev 1 , J. F" spacecraft has been used for compiling the Hypsometric map for Ishtar Terra region [1, 2, 3]. The main

Rodionova, Zhanna F.

165

a COMPILATION in2p3-00383985,version1-14May2009  

E-Print Network [OSTI]

at the Fermi energy, have been used to study the nuclear disassembly of very large and heavy systems. NewNUCLEAR PHYSICS GANIL 1989-1991 a COMPILATION in2p3-00383985,version1-14May2009 #12;NUCLEAR-00383985,version1-14May2009 #12;CONTENTS I - COMPILATION SUMMARY PART 1 : THEORY PART 2 : EXPERIMENTS A - NUCLEAR

Boyer, Edmond

166

Compatibility Study of Compile-Time Optimizations for Power and Reliability  

E-Print Network [OSTI]

, Christos Strydis and Georgi Gaydadjiev Computer Engineering Laboratory, Electrical Engineering Dept. Delft.N.Gaydadjiev} @ tudelft.nl Abstract--Historically compiler optimizations have been used mainly for improving embedded devices, power consumption becomes a crucial problem that is addressed by modern compilers. Biomedical

Kuzmanov, Georgi

167

Compiler and Runtime Support for Shared Memory Parallelization of Data Mining Algorithms  

E-Print Network [OSTI]

machines. This paper reports on runtime and compiler support for easing im­ plementations of data miningCompiler and Runtime Support for Shared Memory Parallelization of Data Mining Algorithms #3 agrawal@cis.ohio­ state.edu ABSTRACT Data mining techniques focus on finding novel and useful patterns

Agrawal, Gagan

168

Hydroelectric power provides a cheap source of electricity with few carbon emissions. Yet, reservoirs are not operated sustainably, which we define as meeting societal needs for water and power while protecting long-term health of the river ecosystem. Reservoirs that generate hydropower are typically operated with the goal of maximizing energy reve  

SciTech Connect (OSTI)

Hydroelectric power provides a cheap source of electricity with few carbon emissions. Yet, reservoirs are not operated sustainably, which we define as meeting societal needs for water and power while protecting long-term health of the river ecosystem. Reservoirs that generate hydropower are typically operated with the goal of maximizing energy revenue, while meeting other legal water requirements. Reservoir optimization schemes used in practice do not seek flow regimes that maximize aquatic ecosystem health. Here, we review optimization studies that considered environmental goals in one of three approaches. The first approach seeks flow regimes that maximize hydropower generation, while satisfying legal requirements, including environmental (or minimum) flows. Solutions from this approach are often used in practice to operate hydropower projects. In the second approach, flow releases from a dam are timed to meet water quality constraints on dissolved oxygen (DO), temperature and nutrients. In the third approach, flow releases are timed to improve the health of fish populations. We conclude by suggesting three steps for bringing multi-objective reservoir operation closer to the goal of ecological sustainability: (1) conduct research to identify which features of flow variation are essential for river health and to quantify these relationships, (2) develop valuation methods to assess the total value of river health and (3) develop optimal control softwares that combine water balance modelling with models that predict ecosystem responses to flow.

Jager, Yetta [ORNL; Smith, Brennan T [ORNL

2008-02-01T23:59:59.000Z

169

The NACRE Thermonuclear Reaction Compilation and Big Bang Nucleosynthesis  

E-Print Network [OSTI]

The theoretical predictions of big bang nucleosynthesis (BBN) are dominated by uncertainties in the input nuclear reaction cross sections. In this paper, we examine the impact on BBN of the recent compilation of nuclear data and thermonuclear reactions rates by the NACRE collaboration. We confirm that the adopted rates do not make large overall changes in central values of predictions, but do affect the magnitude of the uncertainties in these predictions. Therefore, we then examine in detail the uncertainties in the individual reaction rates considered by NACRE. When the error estimates by NACRE are treated as 1\\sigma limits, the resulting BBN error budget is similar to those of previous tabulations. We propose two new procedures for deriving reaction rate uncertainties from the nuclear data: one which sets lower limits to the error, and one which we believe is a reasonable description of the present error budget. We propagate these uncertainty estimates through the BBN code, and find that when the nuclear data errors are described most accurately, the resulting light element uncertainties are notably smaller than in some previous tabulations, but larger than others. Using these results, we derive limits on the cosmic baryon-to-photon ratio $\\eta$, and compare this to independent limits on $\\eta$ from recent balloon-borne measurements of the cosmic microwave background radiation (CMB). We discuss means to improve the BBN results via key nuclear reaction measurements and light element observations.

Richard H. Cyburt; Brian D. Fields; Keith A. Olive

2001-05-17T23:59:59.000Z

170

Proceedings of the workshop on Compilation of (Symbolic) Languages for Parallel Computers  

SciTech Connect (OSTI)

This report comprises the abstracts and papers for the talks presented at the Workshop on Compilation of (Symbolic) Languages for Parallel Computers, held October 31--November 1, 1991, in San Diego. These unreferred contributions were provided by the participants for the purpose of this workshop; many of them will be published elsewhere in peer-reviewed conferences and publications. Our goal is planning this workshop was to bring together researchers from different disciplines with common problems in compilation. In particular, we wished to encourage interaction between researchers working in compilation of symbolic languages and those working on compilation of conventional, imperative languages. The fundamental problems facing researchers interested in compilation of logic, functional, and procedural programming languages for parallel computers are essentially the same. However, differences in the basic programming paradigms have led to different communities emphasizing different species of the parallel compilation problem. For example, parallel logic and functional languages provide dataflow-like formalisms in which control dependencies are unimportant. Hence, a major focus of research in compilation has been on techniques that try to infer when sequential control flow can safely be imposed. Granularity analysis for scheduling is a related problem. The single- assignment property leads to a need for analysis of memory use in order to detect opportunities for reuse. Much of the work in each of these areas relies on the use of abstract interpretation techniques.

Foster, I.; Tick, E. [comp.

1991-11-01T23:59:59.000Z

171

MPI Hello World This guide tells you how to compile and run a simple MPI program on the mc cluster.  

E-Print Network [OSTI]

MPI Hello World This guide tells you how to compile and run a simple MPI program on the mc cluster. Copy the following program into a file named "MPI_hello.c" #include #include int main_Finalize(); } Compile the above program using the MPI compiler mpicc MPI_hello.c -o hello You can provide a list

Grama, Ananth

172

Regulatory and technical reports (abstract index journal): Annual compilation for 1994. Volume 19, Number 4  

SciTech Connect (OSTI)

This compilation consists of bibliographic data and abstracts for the formal regulatory and technical reports issued by the US Nuclear Regulatory Commission (NRC) Staff and its contractors. It is NRC`s intention to publish this compilation quarterly and to cumulate it annually. The main citations and abstracts in this compilation are listed in NUREG number order. These precede the following indexes: secondary report number index, personal author index, subject index, NRC originating organization index (staff reports), NRC originating organization index (international agreements), NRC contract sponsor index (contractor reports), contractor index, international organization index, and licensed facility index. A detailed explanation of the entries precedes each index.

NONE

1995-03-01T23:59:59.000Z

173

Assessment of the current status of basic nuclear data compilations  

SciTech Connect (OSTI)

The Panel on Basic Nuclear Data Compilations believes that it is important to provide the user with an evaluated nuclear database of the highest quality, dependability, and currency. It is also important that the evaluated nuclear data are easily accessible to the user. In the past the panel concentrated its concern on the cycle time for the publication of A-chain evaluations. However, the panel now recognizes that publication cycle time is no longer the appropriate goal. Sometime in the future, publication of the evaluated A-chains will evolve from the present hard-copy Nuclear Data Sheets on library shelves to purely electronic publication, with the advent of universal access to terminals and the nuclear databases. Therefore, the literature cut-off date in the Evaluated Nuclear Structure Data File (ENSDF) is rapidly becoming the only important measure of the currency of an evaluated A-chain. Also, it has become exceedingly important to ensure that access to the databases is as user-friendly as possible and to enable electronic publication of the evaluated data files. Considerable progress has been made in these areas: use of the on-line systems has almost doubled in the past year, and there has been initial development of tools for electronic evaluation, publication, and dissemination. Currently, the nuclear data effort is in transition between the traditional and future methods of dissemination of the evaluated data. Also, many of the factors that adversely affect the publication cycle time simultaneously affect the currency of the evaluated nuclear database. Therefore, the panel continues to examine factors that can influence cycle time: the number of evaluators, the frequency with which an evaluation can be updated, the review of the evaluation, and the production of the evaluation, which currently exists as a hard-copy issue of Nuclear Data Sheets.

Riemer, R.L.

1992-12-31T23:59:59.000Z

174

Compiling Path Expressions into VLSI Circuits `I`. S. Annntharaman  

E-Print Network [OSTI]

-timed. Ncvcrthdcss. UK circuits produced by our construction have area propordonal to N slog(N) whcrc N is the total expression: path R, + Wend, path R, + Wend. `fhc first path cxprcssion prohibits a read operation

Clarke, Edmund M.

175

Accelerator Operations and Physics - Advanced Photon Source  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAbout the Building Technologies Office Workshop Working GroupsToggleArgonne

176

Compilation of quasi-destructive uni cation of type feature structures  

E-Print Network [OSTI]

on the LIGHT system concerns its extension so to achieve compilation of destructive uni#12;cation of FSs #18;a two stages. First, during uni#12;cation, modi#12;ed nodes in the two (rooted) FSs are marked so

Bennett, Brandon

177

Regulatory and technical reports (abstract index journal): Annual compilation for 1996, Volume 21, No. 4  

SciTech Connect (OSTI)

This compilation is the annual cumulation of bibliographic data and abstracts for the formal regulatory and technical reports issued by the U.S. Nuclear Regulatory Commission (NRC) Staff and its contractors.

Sheehan, M.A.

1997-04-01T23:59:59.000Z

178

AUGMENTING COMPUTER MUSIC WITH JUST-IN-TIME COMPILATION Wesley Smith, Graham Wakefield  

E-Print Network [OSTI]

AUGMENTING COMPUTER MUSIC WITH JUST-IN-TIME COMPILATION Wesley Smith, Graham Wakefield University of California Santa Barbara Media Arts and Technology whsmith|wakefield@mat.ucsb.edu ABSTRACT We discuss

California at Santa Barbara, University of

179

4th Generation ECR Ion Sources  

E-Print Network [OSTI]

4th Generation ECR Ion Sources Claude M Lyneis, D. Leitner,to developing a 4 th generation ECR ion source with an RFover current 3 rd generation ECR ion sources, which operate

Lyneis, Claude M.

2010-01-01T23:59:59.000Z

180

P2VSIM: A SIMULATION AND VISUALIZATION TOOL FOR THE P2V COMPILER  

E-Print Network [OSTI]

P2VSIM: A SIMULATION AND VISUALIZATION TOOL FOR THE P2V COMPILER A Thesis by OSCAR MICHAEL ALMEIDA Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE May 2009 Major Subject: Computer Engineering P2VSIM: A SIMULATION AND VISUALIZATION TOOL FOR THE P2V COMPILER A Thesis by OSCAR MICHAEL ALMEIDA Submitted to the Office of Graduate Studies...

Almeida, Oscar

2010-07-14T23:59:59.000Z

Note: This page contains sample records for the topic "operations sources compiled" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Piezotube borehole seismic source  

DOE Patents [OSTI]

A piezoelectric borehole source capable of permanent or semipermanent insertion into a well for uninterrupted well operations is described. The source itself comprises a series of piezoelectric rings mounted to an insulative mandrel internally sized to fit over a section of well tubing, the rings encased in a protective housing and electrically connected to a power source. Providing an AC voltage to the rings will cause expansion and contraction sufficient to create a sonic pulse. The piezoelectric borehole source fits into a standard well, and allows for uninterrupted pass-through of production tubing, and other tubing and electrical cables. Testing using the source may be done at any time, even concurrent with well operations, during standard production.

Daley, Tom M; Solbau, Ray D; Majer, Ernest L

2014-05-06T23:59:59.000Z

182

HEALTH LITERACY SOURCES A Guide for Health Professionals  

E-Print Network [OSTI]

HEALTH LITERACY SOURCES A Guide for Health Professionals Lyman Maynard Stowe Library, UCHC Compiled discussing key considerations in writing CareNotesTM for Patients pages "In a concerted effort to make the patient education documents in the CareNotesTM System as accessible to patients as possible, without

Kim, Duck O.

183

Analysis of the Influence of the Compiler onAnalysis of the Influence of the Compiler on Multicore PerformanceMulticore Performance  

E-Print Network [OSTI]

of threads the performance greatly varies Our goal: a Poly-Compilation Engine (PCE) generates different (PCE) PCB: Benchmarking Routines of the PCE Proof of concept of the PCE Conclusions #12;Analysis Performance Euromicro PDP 2010. Pisa (ce Euromicro PDP 2010. Pisa (Italy)Italy) 44 parallelparallelumum PCE

Giménez, Domingo

184

Compiled by James A. Zeidler, Ph.D.  

E-Print Network [OSTI]

and Posters: Iraq/Afghanistan (2007)...............................8-11 Egypt--Operation Bright Star (2009........................21 Country-Specific Web Sites for Iraq, Afghanistan, and Egypt (Revised 2010)............................22-25 Web-Based CPP Training Module............................26-27 Shopping in Egypt

185

Summary compilation of shell element performance versus formulation.  

SciTech Connect (OSTI)

This document compares the finite element shell formulations in the Sierra Solid Mechanics code. These are finite elements either currently in the Sierra simulation codes Presto and Adagio, or expected to be added to them in time. The list of elements are divided into traditional two-dimensional, plane stress shell finite elements, and three-dimensional solid finite elements that contain either modifications or additional terms designed to represent the bending stiffness expected to be found in shell formulations. These particular finite elements are formulated for finite deformation and inelastic material response, and, as such, are not based on some of the elegant formulations that can be found in an elastic, infinitesimal finite element setting. Each shell element is subjected to a series of 12 verification and validation test problems. The underlying purpose of the tests here is to identify the quality of both the spatially discrete finite element gradient operator and the spatially discrete finite element divergence operator. If the derivation of the finite element is proper, the discrete divergence operator is the transpose of the discrete gradient operator. An overall summary is provided from which one can rank, at least in an average sense, how well the individual formulations can be expected to perform in applications encountered year in and year out. A letter grade has been assigned albeit sometimes subjectively for each shell element and each test problem result. The number of A's, B's, C's, et cetera assigned have been totaled, and a grade point average (GPA) has been computed, based on a 4.0-system. These grades, combined with a comparison between the test problems and the application problem, can be used to guide an analyst to select the element with the best shell formulation.

Heinstein, Martin Wilhelm; Hales, Jason Dean (Idaho National Laboratory, Idaho Falls, ID); Breivik, Nicole L.; Key, Samuel W. (FMA Development, LLC, Great Falls, MT)

2011-07-01T23:59:59.000Z

186

A compilation of reports of the Advisory Committee on Reactor Safeguards, 1997 annual, U.S. Nuclear Regulatory Commission. Volume 19  

SciTech Connect (OSTI)

This compilation contains 67 ACRS reports submitted to the Commission, or to the Executive Director for Operations, during calendar year 1997. It also includes a report to the Congress on the NRC Safety Research Program. Specific topics include: (1) advanced reactor designs, (2) emergency core cooling systems, (3) fire protection, (4) generic letters and issues, (5) human factors, (6) instrumentation, control and protection systems, (7) materials engineering, (8) probabilistic risk assessment, (9) regulatory guides and procedures, rules, regulations, and (10) safety research, philosophy, technology and criteria.

NONE

1998-04-01T23:59:59.000Z

187

Magnetron sputtering source  

DOE Patents [OSTI]

A magnetron sputtering source for sputtering coating substrates includes a high thermal conductivity electrically insulating ceramic and magnetically attached sputter target which can eliminate vacuum sealing and direct fluid cooling of the cathode assembly. The magnetron sputtering source design results in greater compactness, improved operating characteristics, greater versatility, and low fabrication cost. The design easily retrofits most sputtering apparatuses and provides for safe, easy, and cost effective target replacement, installation, and removal.

Makowiecki, Daniel M. (Livermore, WA); McKernan, Mark A. (Livermore, CA); Grabner, R. Fred (Brentwood, CA); Ramsey, Philip B. (Livermore, CA)

1994-01-01T23:59:59.000Z

188

Magnetron sputtering source  

DOE Patents [OSTI]

A magnetron sputtering source for sputtering coating substrates includes a high thermal conductivity electrically insulating ceramic and magnetically attached sputter target which can eliminate vacuum sealing and direct fluid cooling of the cathode assembly. The magnetron sputtering source design results in greater compactness, improved operating characteristics, greater versatility, and low fabrication cost. The design easily retrofits most sputtering apparatuses and provides for safe, easy, and cost effective target replacement, installation, and removal. 12 figs.

Makowiecki, D.M.; McKernan, M.A.; Grabner, R.F.; Ramsey, P.B.

1994-08-02T23:59:59.000Z

189

MEASURED ENERGY PERFORMANCE OF ENERGY-EFFICIENT NEW COMMERCIAL BUILDINGS: RESULTS FROM THE BECA-CN DATA COMPILATION  

E-Print Network [OSTI]

and energy usage for 133 buildings in the BECA-CN (Buildings Energy-Use Compilation and Analysis - part CN: New Energy-Efficient Commercial

Piette, M.A.

2010-01-01T23:59:59.000Z

190

A Compilation and Review of Alaska Energy Projects  

SciTech Connect (OSTI)

There have been many energy projects proposed in Alaska over the past several decades, from large scale hydro projects that have never been built to small scale village power projects to use local alternative energy sources, many of which have also not been built. This project was initially intended to review these rejected projects to evaluate the economic feasibility of these ideas in the light of current economics. This review included contacting the agencies responsible for reviewing and funding these projects in Alaska, including the Alaska Energy Authority, the Denali Commission, and the Arctic Energy Technology Development Laboratory, obtaining available information about these projects, and analyzing the economic data. Unfortunately, the most apparent result of this effort was that the data associated with these projects was not collected in a systematic way that allowed this information to be analyzed.

Arlon Tussing; Steve Colt

2008-12-31T23:59:59.000Z

191

Low-temperature geothermal water in Utah: A compilation of data for thermal wells and springs through 1993  

SciTech Connect (OSTI)

The Geothermal Division of DOE initiated the Low-Temperature Geothermal Resources and Technology Transfer Program, following a special appropriation by Congress in 1991, to encourage wider use of lower-temperature geothermal resources through direct-use, geothermal heat-pump, and binary-cycle power conversion technologies. The Oregon Institute of Technology (OIT), the University of Utah Research Institute (UURI), and the Idaho Water Resources Research Institute organized the federally-funded program and enlisted the help of ten western states to carry out phase one. This first phase involves updating the inventory of thermal wells and springs with the help of the participating state agencies. The state resource teams inventory thermal wells and springs, and compile relevant information on each sources. OIT and UURI cooperatively administer the program. OIT provides overall contract management while UURI provides technical direction to the state teams. Phase one of the program focuses on replacing part of GEOTHERM by building a new database of low- and moderate-temperature geothermal systems for use on personal computers. For Utah, this involved (1) identifying sources of geothermal date, (2) designing a database structure, (3) entering the new date; (4) checking for errors, inconsistencies, and duplicate records; (5) organizing the data into reporting formats; and (6) generating a map (1:750,000 scale) of Utah showing the locations and record identification numbers of thermal wells and springs.

Blackett, R.E.

1994-07-01T23:59:59.000Z

192

SP-100 operational life model. Fiscal Year 1990 annual report  

SciTech Connect (OSTI)

This report covers the initial year`s effort in the development of an Operational Life Model (OLM) for the SP-100 Space Reactor Power System. The initial step undertaken in developing the OLM was to review all available documentation from GE on their plans for the OLM and on the degradation and failure mechanisms envisioned for the SP-100. In addition, the DEGRA code developed at JPL, which modelled the degradation of the General Purpose Heat Source based Radioisotope Thermoelectric Generator (GPHS-RTG), was reviewed. Based on the review of the degradation and failure mechanisms, a list of the most pertinent degradation effects along with their key degradation mechanisms was compiled. This was done as a way of separating the mechanisms from the effects and allowing all of the effects to be incorporated into the OLM. The emphasis was on parameters which will tend to change performance as a function of time and not on those that are simply failures without any prior degradation.

Ewell, R.; Awaya, H.

1990-12-14T23:59:59.000Z

193

Licensee Event Report (LER) compilation for month of March 1988  

SciTech Connect (OSTI)

This monthly report contains Licensee Event Report (LER) operational information that was processed into the LER data file of the Nuclear Safety Information Center (NSIC) during the one-month period identified on the cover of the document. The LERS, from which this information is derived, are submitted to the Nuclear Regulatory Commission (NRC) by nuclear power plant licensees in accordance with federal regulations. Procedures for LER reporting for revisions to those events occurring prior to 1984 are described in NRC Regulatory Guide 1.16 and NUREG-1061, Instructions for preparation of data entry sheets for licensee event reports. For those events occurring on and after January 1, 1984, LERs are being submitted in accordance with the revised rule contained in Title 10 Part 50.73 of the Code of Federal Regulations (10 CFR 50.73 - Licensee Event Report System) which was published in the Federal Register (Vol. 48, No. 144) on July 26, 1983. NUREG-1022, Licensee Event Report System - Description of systems and guidelines for reporting, provides supporting guidance and information on the revised LER rule.

none,

1988-04-01T23:59:59.000Z

194

Dual source heat pump  

DOE Patents [OSTI]

What is disclosed is a heat pump apparatus for conditioning a fluid characterized by a fluid handler and path for circulating the fluid in heat exchange relationship with a refrigerant fluid; at least two refrigerant heat exchangers, one for effecting heat exchange with the fluid and a second for effecting heat exchange between refrigerant and a heat exchange fluid and the ambient air; a compressor for efficiently compressing the refrigerant; at least one throttling valve for throttling liquid refrigerant; a refrigerant circuit; refrigerant; a source of heat exchange fluid; heat exchange fluid circulating device and heat exchange fluid circuit for circulating the heat exchange fluid in heat exchange relationship with the refrigerant; and valves or switches for selecting the heat exchangers and direction of flow of the refrigerant therethrough for selecting a particular mode of operation. The heat exchange fluid provides energy for defrosting the second heat exchanger when operating in the air source mode and also provides a alternate source of heat.

Ecker, Amir L. (Dallas, TX); Pietsch, Joseph A. (Dallas, TX)

1982-01-01T23:59:59.000Z

195

Safe Operating Procedure (Revised 11/11)  

E-Print Network [OSTI]

Generators Definition and Visual Determination of Opacity With regards to stack emissions, opacitySafe Operating Procedure (Revised 11/11) OPACITY OF EMISSIONS FROM COMBUSTION SOURCES (opacity) from combustion sources. Opacity monitoring & measurements are taken in accordance

Farritor, Shane

196

Wilbert Lorne MacDonald Compiled by Sylvia Crooks and Laurenda Daniells (1982)  

E-Print Network [OSTI]

Wilbert Lorne MacDonald fonds Compiled by Sylvia Crooks and Laurenda Daniells (1982) University catalogue) #12;Fonds Description Wilbert MacDonald fonds. ­ 1945-1978. 32.5 cm of textual records. 353 drawings. Biographical Sketch Wilbert MacDonald (1879-1966) obtained his B.A. from the University

Handy, Todd C.

197

SFU"s Carbon Neutral Action Plan! (Compiled in a B.C. government format) !  

E-Print Network [OSTI]

building. The energy data is being collected to determine the potential for solarJune 2009! SFU"s Carbon Neutral Action Plan! (Compiled in a B.C. government format) ! #12;Executive-campus bike facilities to promote cycling to Burnaby campus Carbon Neutral Action Report Simon Fraser

198

Inside the hotline: A compilation of 1995 monthly hotline reports. Annual report  

SciTech Connect (OSTI)

This document is a compilation of questions and answers and federal register summaries of individual RCRA/UST, Superfund & EPCRA monthly hotline reports for the period of January through December 1995. It includes indices arranged by subject, regulatory citation, and statutory citation.

NONE

1996-04-01T23:59:59.000Z

199

`C and tcc: A Language and Compiler for Dynamic Code Generation  

E-Print Network [OSTI]

and expressiveness superior to those of static code. The `C Tick C language is a superset of ANSI C that supports e Words and Phrases: compilers, dynamic code generation, dynamic code optimiza- tion, ANSI C Email: maxp is a superset of ANSI C that supports the high-level and e cient use of dynamic code generation. It extends ANSI

Engler, Dawson

200

Fail-Safe ANSI-C Compiler: An Approach to Making C Programs Secure  

E-Print Network [OSTI]

Fail-Safe ANSI-C Compiler: An Approach to Making C Programs Secure Progress Report Yutaka Oiwa1 proposed and implemented. To our knowledge, however, none of them support all the features of the ANSI C.) This paper describes a memory-safe implementation of the full ANSI C language. Our implementation detects

Sumii, Eijiro

Note: This page contains sample records for the topic "operations sources compiled" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Compiling functional pipe/stream abstractions into conventional programs: Software Pipelines  

E-Print Network [OSTI]

Compiling functional pipe/stream abstractions into conventional programs: Software Pipelines with these technques and aware of the implementation of infinite stream/pipe abstractions in Lisp, Scheme the stream/pipe abstraction may be used, in principle, even by those who allege that all practical programs

Fateman, Richard J.

202

Compiling functional pipe/stream abstractions into conventional programs: Software Pipelines  

E-Print Network [OSTI]

Compiling functional pipe/stream abstractions into conventional programs: Software Pipelines as a silly functional programming trick. We show how the stream/pipe abstraction can sometimes be converted to many students is streams (in the language of Abelson/Sussman [1]) or pipes (in the language of Norvig

Fateman, Richard J.

203

RESEARCH PROJECTS & IDEAS FOR FALL 2013 Soil and Water Lab, Ecohydrology Group (compiled by Todd Walter)  

E-Print Network [OSTI]

NEW (ish) Aquatic Ecology and Hydraulic Fracturing (WRI/DEC, other) Maya Field work done; counting1 RESEARCH PROJECTS & IDEAS FOR FALL 2013 Soil and Water Lab, Ecohydrology Group (compiled by Todd and N- treatments Cayuga Lake watershed modeling (Cornell) Erin with Becky, Dan, and Brian Need to start

Walter, M.Todd

204

The Design, Implementation, and Evaluation of a Compiler Algorithm for CPU Energy Reduction  

E-Print Network [OSTI]

. Physical measurements on a highperformance laptop show that total system (i.e., laptop) energy savings, with a performance slowdown of 2%. It was also discovered that the energy usage of the programs using our DVSThe Design, Implementation, and Evaluation of a Compiler Algorithm for CPU Energy Reduction Chung

Kremer, Ulrich

205

Compiler-Directed Region-Based Security for Low-Overhead Software Vijay Kongubangaram  

E-Print Network [OSTI]

Compiler-Directed Region-Based Security for Low-Overhead Software Protection Vijay Kongubangaram Department of Computer Science The George Washington University Washington, DC vijaykpk@gwu.edu Olga Gelbart@gwu.edu Abstract Software security has become a prominent area of re- search in recent years, with research efforts

Simha, Rahul

206

inria-00104146,version2-10Jan2007 Memory and compiler optimizations for  

E-Print Network [OSTI]

optimization incurs on-line logic, dedicated circuits and thus some overhead at runtime (energy and/or time. Among those, hardware design implies work at the microelectronics and physics level, while hardware). Software optimization at compile-time, on the other side, is an off-line logic (if performed statically

Paris-Sud XI, Université de

207

A Fine-Grained Analysis of the Performance and Power Benefits of Compiler Optimizations for Embedded  

E-Print Network [OSTI]

optimization phase inside of an adaptive dynamic optimizer if power consumption is of importance. 1 grant. is achieved by hand programming various transformations in PowerPC assembly. Specifically, weA Fine-Grained Analysis of the Performance and Power Benefits of Compiler Optimizations

Giesbrecht, Mark

208

Margaret A. Ormsby Oral History Project Compiled by Christopher Hives (1999)  

E-Print Network [OSTI]

Margaret A. Ormsby Oral History Project fonds Compiled by Christopher Hives (1999) University Alphabetically by Interviewee 1-6 #1 John Bovey (April 9, 1999) - 2 tapes 1-7 #2 Keith Ralston (May 4, 1999) 1 Marcellus (May 11, 1999) 1-10 #5 Lewis G. Thomas (May 12, 1999) 1-11 #6 Keith Ralston (May 12, 1999) 1-12 #7

Handy, Todd C.

209

The loop compiler for Java and JML Joachim van den Berg, Bart Jacobs  

E-Print Network [OSTI]

engineering process. Within this project a dynamic logic for JavaCard, Java's subset for smart cardThe loop compiler for Java and JML Joachim van den Berg, Bart Jacobs Computing Science Institute into their semantics in higher order logic. It serves as a front-end to a the- orem prover in which the actual veri#12

Jacobs, Bart

210

Regulatory and technical reports (abstract index journal): Annual compilation for 1997. Volume 22, Number 4  

SciTech Connect (OSTI)

This journal includes all formal reports in the NUREG series prepared by the NRC staff and contractors; proceedings of conferences and workshops; as well as international agreement reports. The entries in this compilation are indexed for access by title and abstract, secondary report number, personal author, subject, NRC organization for staff and international agreements, contractor, international organization, and licensed facility.

NONE

1998-04-01T23:59:59.000Z

211

Solving planning-graph by compiling it into CSP Minh Binh Do & Subbarao Kambhampati  

E-Print Network [OSTI]

Solving planning-graph by compiling it into CSP Minh Binh Do & Subbarao Kambhampati Department to adapt CSP search techniques into the backward search phase of Graphplan. This paper describes GP-CSP, a system that does planning by automati- cally converting Graphplan's planning graph into a CSP encoding

Kambhampati, Subbarao

212

Solving planninggraph by compiling it into CSP Minh Binh Do \\Lambda & Subbarao Kambhampati  

E-Print Network [OSTI]

Solving planning­graph by compiling it into CSP Minh Binh Do \\Lambda & Subbarao Kambhampati to adapt CSP search techniques into the backward search phase of Graphplan. This paper describes GP­CSP, a system that does planning by automati­ cally converting Graphplan's planning graph into a CSP encoding

Kambhampati, Subbarao

213

A Compilation Framework for Power and Energy Management on Mobile Computers  

E-Print Network [OSTI]

. Initial experiments show that energy consumption can be reduced signifi­ cantly, in some cases up to oneA Compilation Framework for Power and Energy Management on Mobile Computers Ulrich Kremer #3; Jamey in mobile environments. Image processing can be used in autonomous robot navigation, target acquisition

Kremer, Ulrich

214

Compiler and Runtime Support for Shared Memory Parallelization of Data Mining Algorithms  

E-Print Network [OSTI]

Compiler and Runtime Support for Shared Memory Parallelization of Data Mining Algorithms Xiaogang, Columbus OH 43210¡xgli,jinr,agrawal¢@cis.ohio-state.edu Abstract. Data mining techniques focus on finding support for developing scalable implementa- tions of data mining algorithms. Our work encompasses shared

Agrawal, Gagan

215

Phase 1 environmental report for the Advanced Neutron Source at Oak Ridge National Laboratory  

SciTech Connect (OSTI)

The US Department of Energy (DOE) has proposed the construction and operation of the Advanced Neutron Source (ANS), a 330-MW(f) reactor, at Oak Ridge National Laboratory (ORNL) to support neutron scattering and nuclear physics experiments. ANS would provide a steady-state source of neutrons that are thermalized to produce sources of hot, cold, and very coal neutrons. The use of these neutrons in ANS experiment facilities would be an essential component of national research efforts in basic materials science. Additionally, ANS capabilities would include production of transplutonium isotopes, irradiation of potential fusion and fission reactor materials, activation analysis, and production of medical and industrial isotopes such as {sup 252}Cf. Although ANS would not require licensing by the US Nuclear Regulatory Commission (NRC), DOE regards the design, construction, and operation of ANS as activities that would produce a licensable facility; that is, DOE is following the regulatory guidelines that NRC would apply if NRC were licensing the facility. Those guidelines include instructions for the preparation of an environmental report (ER), a compilation of available data and preliminary analyses regarding the environmental impacts of nuclear facility construction and operation. The ER, described and outlined in NRC Regulatory Guide 4.2, serves as a background document to facilitate the preparation of environmental impact statements (EISs). Using Regulatory Guide 4.2 as a model, this ANS ER provides analyses and information specific to the ANS site and area that can be adopted (and modified, if necessary) for the ANS EIS. The ER is being prepared in two phases. Phase 1 ER includes many of the data and analyses needed to prepare the EIS but does not include data or analyses of alternate sites or alternate technologies. Phase 2 ER will include the additional data and analyses stipulated by Regulatory Guide 4.2.

Blasing, T.J.; Brown, R.A.; Cada, G.F.; Easterly, C.; Feldman, D.L.; Hagan, C.W.; Harrington, R.M.; Johnson, R.O.; Ketelle, R.H.; Kroodsma, R.L.; McCold, L.N.; Reich, W.J.; Scofield, P.A.; Socolof, M.L.; Taleyarkhan, R.P.; Van Dyke, J.W.

1992-02-01T23:59:59.000Z

216

Regulatory and technical reports (abstract index journal). Volume 20, No. 2: Compilation for second quarter April--June 1995  

SciTech Connect (OSTI)

This compilation consists of bibliographic data and abstracts for the formal regulatory and technical reports issued by the U.S. Nuclear Regulatory Commission (NRC) Staff and its contractors. It is NRC`s intention to publish this compilation quarterly and to cumulate it annually.

NONE

1995-09-01T23:59:59.000Z

217

The CBP Parameter ---a Useful Annotation to Aid SDF Compilers 1 of 20 The CBP Parameter ---a Useful Annotation to  

E-Print Network [OSTI]

The CBP Parameter --- a Useful Annotation to Aid SDF Compilers 1 of 20 The CBP Parameter --- a Useful Annotation to Aid SDF Compilers 1 Shuvra S. Bhattacharyya Department of Electrical and Computer dataflow (SDF) graphs. SDF is a restricted form of dataflow where each computational module (actor

Bhattacharyya, Shuvra S.

218

The CBP Parameter --a Useful Annotation to Aid SDF Compilers 1 of 20 The CBP Parameter --a Useful Annotation to  

E-Print Network [OSTI]

The CBP Parameter -- a Useful Annotation to Aid SDF Compilers 1 of 20 The CBP Parameter -- a Useful Annotation to Aid SDF Compilers1 Shuvra S. Bhattacharyya Department of Electrical and Computer Engineering dataflow (SDF) graphs. SDF is a restricted form of dataflow where each computational module (actor

Bhattacharyya, Shuvra S.

219

EMAG2: A 2arc min resolution Earth Magnetic Anomaly Grid compiled from satellite, airborne, and marine magnetic  

E-Print Network [OSTI]

grid for the World Digital Magnetic Anomaly Map. The resolution has been improved from 3 arc min to 2EMAG2: A 2arc min resolution Earth Magnetic Anomaly Grid compiled from satellite, airborne, I-19020 Fezzano, Italy [1] A global Earth Magnetic Anomaly Grid (EMAG2) has been compiled from

Mller, Dietmar

220

Wastewater Construction and Operation Permits (Iowa)  

Broader source: Energy.gov [DOE]

These regulations describe permit requirements for the construction and operation of facilities treating wastewater, and provide separation distances from other water sources.

Note: This page contains sample records for the topic "operations sources compiled" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

OPERATIONS (OPS)  

Broader source: Energy.gov (indexed) [DOE]

OPS) OBJECTIVE OPS.1 The formality and discipline of operations is adequate to conduct work safely and programs are in place to maintain this formality and discipline. (CR 13)...

222

Design operators  

E-Print Network [OSTI]

Design operators is a thesis that investigates the nature and characteristics of the design process by examining the interaction of computation with architectural design. The effects of the introduction of these media in ...

Dritsas, Stylianos, 1978-

2004-01-01T23:59:59.000Z

223

Operating Costs  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This chapter is focused on capital costs for conventional construction and environmental restoration and waste management projects and examines operating cost estimates to verify that all elements of the project have been considered and properly estimated.

1997-03-28T23:59:59.000Z

224

Compilation of Diversity Factors and Schedules for Energy and Cooling Load Calculations, ASHRAE Research Project 1093, Preliminary Report, Literature Review and Database Search  

E-Print Network [OSTI]

Buildings Energy Consumption Survey (CBECS), a national survey of commercial buildings and their energy suppliers, in compiling their statistics of the commercial building stock in the U.S. We based our proposal on the detailed compiled survey results...

Abushakra, B.; Haberl, J. S.; Claridge, D. E.

225

Compilation and Presentation of Existing Data on Oil and Gas Leasing Development in a Manner Useful to the NEPA Process  

SciTech Connect (OSTI)

In recognition of our nation's increasing energy needs, the George W. Bush Administration's National Energy Policy Development Group report (May 2001) suggested that one way to increase domestic on-shore production of oil and gas is to increase access to undiscovered resources on federal lands. Also recognized is the need to protect and conserve natural resources, which often are located on and around federal lands. The National Environmental Policy Act (NEPA) was designed to create and maintain conditions under which man and nature can exist in productive harmony. NEPA requires that federal agencies prepare an environmental impact statement (EIS) prior to the approval of any development activities. The NEPA scope is broad, with the process applicable to many situations from the building of highways, barge facilities and water outtake facilities, bridges, and watersheds to other less significant projects. The process often involves cooperation among multiple federal agencies, industry, scientists and consultants, and the surrounding community. The objective of the project, titled Compilation and Presentation of Existing Data on Oil and Gas Leasing and Development in a Manner Useful to the NEPA Process, is to facilitate faster and more comprehensive access to current oil and gas data by land management agencies and operators. This will enable key stakeholders in the NEPA process to make decisions that support access to federal resources while at the same time achieving a legitimate balance between environmental protection and appropriate levels of development.

Amy Childers; Dave Cornue

2008-11-30T23:59:59.000Z

226

Intense Pulsed Neutron Source progress report for 1991  

SciTech Connect (OSTI)

The IPNS Progress Report 10th Anniversary Edition is being published in recognition of the first ten years of successful IPNS operation. To emphasize the significance of this milestone, we wanted this report to stand apart from the previous IPNS Progress Reports, and the best way to do this, we thought, was to make the design and organization of the report significantly different. In their articles, authors were asked to emphasize not only advances made since IPNS began operating but also the groundwork that was laid at its predecessor facilities - Argonne`s ZING-P and ZING-P` prototype pulsed neutron sources and CP-5 reactor. Each article stands as a separate chapter in the report, since each represents a particular instrument or class of instruments, system, technique, or area of research. In some cases, contributions were similar to review articles in scientific journals, complete with extensive lists of references. Ten-year cumulative lists of members of IPNS committees and of scientists who have visited or done experiments at IPNS were assembled. A list of published and ``in press`` articles in journals, books, and conference proceedings, resulting from work done at IPNS during the past ten years, was compiled. And archival photographs of people and activities during the ten-year history of IPNS were located and were used liberally throughout the report. The titles of the chapters in this report are: accelerator; computer; radiation effects; powder; stress; single crystal; superconductivity; amorphous; small angle; reflection; quasielastic; inelastic; inelastic magnetic; deep inelastic; user program; the future; and publications.

Not Available

1991-12-31T23:59:59.000Z

227

Voltage controlled current source  

DOE Patents [OSTI]

A seven decade, voltage controlled current source is described for use in testing intermediate range nuclear instruments that covers the entire test current range of from 10 picoamperes to 100 microamperes. High accuracy is obtained throughout the entire seven decades of output current with circuitry that includes a coordinated switching scheme responsive to the input signal from a hybrid computer to control the input voltage to an antilog amplifier, and to selectively connect a resistance to the antilog amplifier output to provide a continuous output current source as a function of a preset range of input voltage. An operator controlled switch provides current adjustment for operation in either a real-time simulation test mode or a time response test mode.

Casne, Gregory M. (Pittsburgh, PA)

1992-01-01T23:59:59.000Z

228

Compiler correctness and the translation of logics Theo M.V. Janssen  

E-Print Network [OSTI]

be proven by finite algebraic means. PrL Compile - AssL Sem(PrL) IntP L ? Decode CompMod IntAL ? PrL of the rightmost diagram. PrL: Programming Language IntP L Interpretation of PrL AssL: Assembly Language IntAL Interpretation of AssL Sem(PrL): meanings of the PrL CompMod: abstract model of computer Several variants

Amsterdam, University of

229

Inside the hotline: A compilation of 1992 monthly hotline reports. Annual report  

SciTech Connect (OSTI)

The document is a compilation of questions and answers, Federal Register summaries from individual monthly Hotline reports for the period of January to December 1992. It includes indices arranged by subject, regulatory citation, and statutory citation. The reader can use the document to explore the application of the regulations to different scenarios or to shed light on complex issues. Neither the answers to questions nor the Federal Register summaries are intended to fully represent or to be used in place of the regulations.

Not Available

1993-03-01T23:59:59.000Z

230

1989 OCRWM [Office of Civilian Radioactive Waste Management] Bulletin compilation and index  

SciTech Connect (OSTI)

The OCRWM Bulletin is published by the Department of Energy, Office of Civilian Radioactive Waste Management to provide current information about the national program for managing spent fuel and high-level radioactive waste. This document is a compilation of issues from the 1989 calendar year. A table of contents and one index have been provided to assist in finding information contained in this year`s Bulletins. The pages have been numbered consecutively at the bottom for easy reference. 7 figs.

NONE

1990-02-01T23:59:59.000Z

231

Actes JFPC 2012 Compilation de CSP en Set-labeled Diagram  

E-Print Network [OSTI]

Actes JFPC 2012 Compilation de CSP en Set-labeled Diagram Alexandre Niveau H´el`ene Fargier C parfois ^etre ex´ecut´ees en ligne et en temps limit´e. Dans ce cas, la r´esolution du CSP n'est pas assez´e- sente l'assignation d'une variable ; l'ensemble des solu- tions d'un CSP correspond `a l'ensemble des

Paris-Sud XI, Université de

232

Compiler Comparisons  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to User Group and UserofProteinNewsat

233

Insertion of operation-and-indicate instructions for optimized SIMD code  

SciTech Connect (OSTI)

Mechanisms are provided for inserting indicated instructions for tracking and indicating exceptions in the execution of vectorized code. A portion of first code is received for compilation. The portion of first code is analyzed to identify non-speculative instructions performing designated non-speculative operations in the first code that are candidates for replacement by replacement operation-and-indicate instructions that perform the designated non-speculative operations and further perform an indication operation for indicating any exception conditions corresponding to special exception values present in vector register inputs to the replacement operation-and-indicate instructions. The replacement is performed and second code is generated based on the replacement of the at least one non-speculative instruction. The data processing system executing the compiled code is configured to store special exception values in vector output registers, in response to a speculative instruction generating an exception condition, without initiating exception handling.

Eichenberger, Alexander E; Gara, Alan; Gschwind, Michael K

2013-06-04T23:59:59.000Z

234

Source-to-Source Architecture Transformation for Performance Optimization in BIP  

E-Print Network [OSTI]

Source-to-Source Architecture Transformation for Performance Optimization in BIP Marius Bozga of composition operators: inter- actions and priorities. In this paper we present a method that transforms of the interconnection of components [14]. Source-to-source transformations have been considered as a powerful means

Paris-Sud XI, Universit de

235

Quantifying sources of methane using light alkanes in the Los Angeles basin, California  

E-Print Network [OSTI]

Air Resources Board (CARB) was tasked with compiling and verifying an inventory of GHG emissions of the statewide 2006 CARB GHG inventory and from a bottom-up accounting of CH4 sources, respectively. [3] Several are larger than expected from population-apportioned bottom-up state inventories, consistent with previously

Cohen, Ronald C.

236

Maximizing Multiprocessor Performance with the SUIF Compiler Mary W. Hall y Jennifer M. Anderson Saman P. Amarasinghe  

E-Print Network [OSTI]

Maximizing Multiprocessor Performance with the SUIF Compiler Mary W. Hall y Jennifer M. Anderson and NSF. Jennifer Anderson is currently a researcher with Digital Equipment's Western Research Lab. 1 #12

Pratt, Vaughan

237

Operation Poorman  

SciTech Connect (OSTI)

The objectives of Operation Poorman were to design and build a portable seismic system and to set up and use this system in a cold-weather environment. The equipment design uses current technology to achieve a low-power, lightweight system that is configured into three modules. The system was deployed in Alaska during wintertime, and the results provide a basis for specifying a mission-ready seismic verification system.

Pruvost, N.; Tsitouras, J.

1981-03-18T23:59:59.000Z

238

Operations Videos  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratorySpeeding access1 TechnicalOilOnlineandOperations

239

Operational health physics training  

SciTech Connect (OSTI)

The initial four sections treat basic information concerning atomic structure and other useful physical quantities, natural radioactivity, the properties of {alpha}, {beta}, {gamma}, x rays and neutrons, and the concepts and units of radiation dosimetry (including SI units). Section 5 deals with biological effects and the risks associated with radiation exposure. Background radiation and man-made sources are discussed next. The basic recommendations of the ICRP concerning dose limitations: justification, optimization (ALARA concepts and applications) and dose limits are covered in Section seven. Section eight is an expanded version of shielding, and the internal dosimetry discussion has been extensively revised to reflect the concepts contained in the MIRD methodology and ICRP 30. The remaining sections discuss the operational health physics approach to monitoring radiation. Individual sections include radiation detection principles, instrument operation and counting statistics, health physics instruments and personnel monitoring devices. The last five sections deal with the nature of, operation principles of, health physics aspects of, and monitoring approaches to air sampling, reactors, nuclear safety, gloveboxes and hot cells, accelerators and x ray sources. Decontamination, waste disposal and transportation of radionuclides are added topics. Several appendices containing constants, symbols, selected mathematical topics, and the Chart of the Nuclides, and an index have been included.

NONE

1992-06-01T23:59:59.000Z

240

Operations Information  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 The 2002 WholesaleEnergy'sRunning jobsOPERATING PLANOperations

Note: This page contains sample records for the topic "operations sources compiled" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Testing the isotropy of the Universe by using the JLA compilation of type-Ia supernovae  

E-Print Network [OSTI]

We probe the possible anisotropy in the accelerated expanding Universe by using the JLA compilation of type-Ia supernovae. We constrain the amplitude and direction of anisotropy in the anisotropic cosmological models. For the dipole-modulated $\\Lambda$CDM model, the anisotropic amplitude has an upper bound $D<1.04\\times10^{-3}$ at the $68\\%$ confidence level. Similar results are found in the dipole-modulated $w$CDM and CPL models. Our studies show that there are no significant evidence for the anisotropic expansion of the Universe. Thus the Universe is still well compatible with the isotropy.

Lin, Hai-Nan; Chang, Zhe; Li, Xin

2015-01-01T23:59:59.000Z

242

An Optimizing Compiler for Petascale I/O on Leadership-Class Architectures  

SciTech Connect (OSTI)

In high-performance computing (HPC), parallel I/O architectures usually have very complex hierarchies with multiple layers that collectively constitute an I/O stack, including high-level I/O libraries such as PnetCDF and HDF5, I/O middleware such as MPI-IO, and parallel file systems such as PVFS and Lustre. Our DOE project explored automated instrumentation and compiler support for I/O intensive applications. Our project made significant progress towards understanding the complex I/O hierarchies of high-performance storage systems (including storage caches, HDDs, and SSDs), and designing and implementing state-of-the-art compiler/runtime system technology that targets I/O intensive HPC applications that target leadership class machine. This final report summarizes the major achievements of the project and also points out promising future directions Two new sections in this report compared to the previous report are IOGenie and SSD/NVM-specific optimizations.

Kandemir, Mahmut Taylan [PSU; Choudary, Alok [Northwestern; Thakur, Rajeev [ANL

2014-03-01T23:59:59.000Z

243

Multiple source heat pump  

DOE Patents [OSTI]

A heat pump apparatus for conditioning a fluid characterized by a fluid handler and path for circulating a fluid in heat exchange relationship with a refrigerant fluid, at least three refrigerant heat exchangers, one for effecting heat exchange with the fluid, a second for effecting heat exchange with a heat exchange fluid, and a third for effecting heat exchange with ambient air; a compressor for compressing the refrigerant; at least one throttling valve connected at the inlet side of a heat exchanger in which liquid refrigerant is vaporized; a refrigerant circuit; refrigerant; a source of heat exchange fluid; heat exchange fluid circuit and pump for circulating the heat exchange fluid in heat exchange relationship with the refrigerant; and valves or switches for selecting the heat exchangers and directional flow of refrigerant therethrough for selecting a particular mode of operation. Also disclosed are a variety of embodiments, modes of operation, and schematics therefor.

Ecker, Amir L. (Duncanville, TX)

1983-01-01T23:59:59.000Z

244

Source Selection Guide  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment of Energy U.S.Improve Emitter Efficiency Under High-Current Operation Source

245

Source Selection Guide  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment of Energy U.S.Improve Emitter Efficiency Under High-Current Operation Source

246

Development of a tool dedicated to the evaluation of hydrogen term source for technological Wastes: assumptions, physical models, and validation  

SciTech Connect (OSTI)

In radioactive waste packages hydrogen is generated, in one hand, from the radiolysis of wastes (mainly organic materials) and, in the other hand, from the radiolysis of water content in the cement matrix. In order to assess hydrogen generation 2 tools based on operational models have been developed. One is dedicated to the determination of the hydrogen source term issues from the radiolysis of the wastes: the STORAGE tool (Simulation Tool Of Emission Radiolysis Gas), the other deals with the hydrogen source term gas, produced by radiolysis of the cement matrices (the Damar tool). The approach used by the STORAGE tool for assessing the production rate of radiolysis gases is divided into five steps: 1) Specification of the data packages, in particular, inventories and radiological materials defined for a package medium; 2) Determination of radiochemical yields for the different constituents and the laws of behavior associated, this determination of radiochemical yields is made from the PRELOG database in which radiochemical yields in different irradiation conditions have been compiled; 3) Definition of hypothesis concerning the composition and the distribution of contamination inside the package to allow assessment of the power absorbed by the constituents; 4) Sum-up of all the contributions; And finally, 5) validation calculations by comparison with a reduced sampling of packages. Comparisons with measured values confirm the conservative character of the methodology and give confidence in the safety margins for safety analysis report.

Lamouroux, C. [CEA Saclay, Nuclear Energy Division /DANS, Department of physico-chemistry, 91191 Gif sur yvette (France); Esnouf, S. [CEA Saclay, DSM/IRAMIS/SIS2M/Radiolysis Laboratory , 91191 Gif sur yvette (France); Cochin, F. [Areva NC,recycling BU, DIRP/RDP tour Areva, 92084 Paris La Defense (France)

2013-07-01T23:59:59.000Z

247

Regulatory and technical reports (abstract index journal): Compilation for third quarter 1996 July--September. Volume 21, Number 3  

SciTech Connect (OSTI)

This compilation consists of bibliographic data and abstracts for the formal regulatory and technical reports issued by the US Nuclear Regulatory Commission (NRC) Staff and its contractors. It is NRC`s intention to publish this compilation quarterly and to cumulate it annually. The main citations and abstracts in this compilation are listed in NUREG number order: NUREG-XXXX, NUREG/CP-XXXX, NUREG/CR-XXXX, and NUREG/IA-XXXX. These precede the following indexes: secondary report number index; personal author index; subject index; NRC originating organization index (staff reports); NRC originating organization index (international agreements); NRC contract sponsor index (contractor reports); contractor index; international organization index; and licensed facility index. A detailed explanation of the entries precedes each index.

NONE

1997-02-01T23:59:59.000Z

248

Regulatory and technical reports (abstract index journal): Compilation for third quarter 1994, July--September. Volume 19, Number 3  

SciTech Connect (OSTI)

This compilation consists of bibliographic data and abstracts for the formal regulatory and technical reports issues by the U.S. Nuclear Regulatory Commission (NRC) Staff and its contractors. It is NRC`s intention to publish this compilation quarterly and to cumulate it annually. The main citations and abstracts in this compilation are listed in NUREG number order: NUREG-XXXX, NUREG/CP-XXXX, NUREG/CR-XXXX, and NUREG/IA-XXXX. These precede the following indexes: Secondary Report Number Index, Personal Author Index, Subject Index, NRC Originating Organization Index (Staff Reports), NRC Originating Organization Index (International Agreements), NRC Contract Sponsor Index (Contractor Reports) Contractor Index, International Organization Index, Licensed Facility Index. A detailed explanation of the entries precedes each index.

none,

1994-12-01T23:59:59.000Z

249

National Synchrotron Light Source II  

ScienceCinema (OSTI)

The National Synchrotron Light Source II (NSLS-II) at the U.S. Department of Energy's Brookhaven National Laboratory is a proposed new state-of-the-art medium energy storage ring designed to deliver world-leading brightness and flux with top-off operation

Steve Dierker

2010-01-08T23:59:59.000Z

250

MIT inverse Compton source concept  

E-Print Network [OSTI]

A compact X-ray source based on inverse Compton scattering of a high-power laser on a high-brightness linac beam is described. The facility can operate in two modes: at high (MHz) repetition rate with flux and brilliance ...

Graves, William S.

251

A compilation of automatic differentiation tools presented at the 1995 international convention on industrial and applied mathematics, Hamburg.  

SciTech Connect (OSTI)

This document was compiled for the minisymposium on automatic differentiation tools presented at the 1995 International Convention on Industrial and Applied Mathematics, Hamburg. The document was compiled by Chris Bischof and Fred Dilley of Argonne National Laboratory with contributions by Mike Bartholomew-Biggs, Stephen Brown, Alan Carle, Bruce Christianson, David Cowey, Frederic Eyssette, David M. Gay, Ralf Giering, Andreas Griewank, Jim Horwedel, Peyvand Khademi, K. Kubota, Andrew Mauer, Michael B. Monagan, John Pryce, John Reid, Andreas Rhodin, Nicole Rostaing-Schmidt, and Jean Utke.

Bischof, C.; Dilley, F.; Mathematics and Computer Science

1995-01-01T23:59:59.000Z

252

E-Print Network 3.0 - advanced mcr operators Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Computer Technologies and Information Sciences 31 Advanced Photon Source Conduct of Operations Manual Summary: ;TABLE OF CONTENTS x Advanced Photon Source Conduct of...

253

Quality Assurance Project Plan for radioactive airborne emissions data compilation and reporting  

SciTech Connect (OSTI)

This Quality Assurance Project Plan addresses the quality assurance requirements for compiling data from radioactie aiborne emissions. These data will be reported to the US Environmental Protection Agency, the US Department of Energy, and the Washington State Department of Health. Hanford Site radioactive airborne emissions are reported to the US Environmental Protection Agency in compliance with Title 40, Protection of the Environment, Code of Federal Regulations, Part 61, ``National Emissions Standards for Hazardous Air Pollutants , ``Subpart H, ``National Emissions Standards for Emissions of Radionuclides Other Than Radon From Department of Energy Facilities`` (EPA 1989a). Reporting to US Department of Energy is performed in compliance with requirements of US Department of Energy Order 5400.1, General Environmental Protection Program (DOE 1988a).

Burris, S.A.; Thomas, S.P.

1994-02-01T23:59:59.000Z

254

Advanced Industrial Materials (AIM) program. Compilation of project summaries and significant accomplishments FY 1996  

SciTech Connect (OSTI)

In many ways, the Advanced Industrial Materials (AIM) Program underwent a major transformation in Fiscal Year 1995 and these changes have continued to the present. When the Program was established in 1990 as the Advanced Industrial Concepts (AIC) Materials Program, the mission was to conduct applied research and development to bring materials and processing technologies from the knowledge derived from basic research to the maturity required for the end use sectors for commercialization. In 1995, the Office of Industrial Technologies (OIT) made radical changes in structure and procedures. All technology development was directed toward the seven {open_quotes}Vision Industries{close_quotes} that use about 80% of industrial energy and generated about 90% of industrial wastes. These are: (1) Aluminum; (2) Chemical; (3) Forest Products; (4) Glass; (5) Metal Casting; (6) Refineries; and (7) Steel. This report is a compilation of project summaries and significant accomplishments on materials.

NONE

1997-04-01T23:59:59.000Z

255

Radiation source  

DOE Patents [OSTI]

A device and method for relativistic electron beam heating of a high-density plasma in a small localized region. A relativistic electron beam generator or accelerator produces a high-voltage electron beam which propagates along a vacuum drift tube and is modulated to initiate electron bunching within the beam. The beam is then directed through a low-density gas chamber which provides isolation between the vacuum modulator and the relativistic electron beam target. The relativistic beam is then applied to a high-density target plasma which typically comprises DT, DD, or similar thermonuclear gas at a density of 10.sup.17 to 10.sup.20 electrons per cubic centimeter. The target gas is ionized prior to application of the relativistic electron beam by means of a laser or other preionization source to form a plasma. Utilizing a relativistic electron beam with an individual particle energy exceeding 3 MeV, classical scattering by relativistic electrons passing through isolation foils is negligible. As a result, relativistic streaming instabilities are initiated within the high-density target plasma causing the relativistic electron beam to efficiently deposit its energy into a small localized region of the high-density plasma target.

Thode, Lester E. (Los Alamos, NM)

1981-01-01T23:59:59.000Z

256

E-Print Network 3.0 - aircraft operating economics Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and aircraft are operated... , into operation, maintenance and eventually to disposal. Many ... Source: de Weck, Olivier L. - Department of Aeronautics and Astronautics,...

257

E-Print Network 3.0 - atrial switch operation Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

This waveform generator made operator... and been incorporated into a stream based ECG simulator. The simulator a timing operator to switch from... Open-Source Method...

258

Seismic sources  

DOE Patents [OSTI]

Apparatus is described for placement in a borehole in the earth, which enables the generation of closely controlled seismic waves from the borehole. Pure torsional shear waves are generated by an apparatus which includes a stator element fixed to the borehole walls and a rotor element which is electrically driven to rapidly oscillate on the stator element to cause reaction forces transmitted through the borehole walls to the surrounding earth. Logitudinal shear waves are generated by an armature that is driven to rapidly oscillate along the axis of the borehole relative to a stator that is clamped to the borehole, to cause reaction forces transmitted to the surrounding earth. Pressure waves are generated by electrically driving pistons that press against opposite ends of a hydraulic reservoir that fills the borehole. High power is generated by energizing the elements at a power level that causes heating to over 150.degree. C. within one minute of operation, but energizing the elements for no more than about one minute.

Green, Michael A. (Oakland, CA); Cook, Neville G. W. (Lafayette, CA); McEvilly, Thomas V. (Berkeley, CA); Majer, Ernest L. (El Cirrito, CA); Witherspoon, Paul A. (Berkeley, CA)

1992-01-01T23:59:59.000Z

259

Designing subwavelength-structured light sources  

E-Print Network [OSTI]

The laser has long been established as the best possible optical source for fundamental studies and applications requiring high field intensity, single mode operation, a high degree of coherence, a narrow linewidth and ...

Chua, Song Liang

2013-01-01T23:59:59.000Z

260

Development of a criteria based strategic sourcing model  

E-Print Network [OSTI]

Strategic sourcing is a key factor in enhancing Nike's competitiveness and organizational and operational performances. As Nike faces increasing pressure to expand margins and reduce source base risk during a climate of ...

Quionez, Carlo G. (Carlo Gabriel)

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "operations sources compiled" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Integrated Retail & Wholesale Power System Operation  

E-Print Network [OSTI]

Integrated Retail & Wholesale Power System Operation with Smart-Grid Functionality PIs: Dionysios Retail/Wholesale Power System Operation with Smart-Grid Functionality Project PIs: Dionysios Aliprantis (open-source release): AMES Wholesale Power Market Testbed (ISU) + GridLAB-D distribution platform (DOE

Tesfatsion, Leigh

262

Regulatory and technical reports: Abstract index journal. Volume 20, No. 3, Compilation for third quarter 1995, July--September  

SciTech Connect (OSTI)

This journal includes all formal reports in the NUREG series prepared by the NRC staff and contractors; proceedings of conferences and workshops; as well as international agreement reports. The entries in this compilation are indexed for access by title and abstract, secondary report number, personal author, subject, NRC organization for staff and international agreements, contractor, international organization, and licensed facility.

NONE

1996-01-01T23:59:59.000Z

263

Regulatory and technical reports (abstract index journal): Compilation for second quarter 1997 April--June. Volume 22, Number 2  

SciTech Connect (OSTI)

This journal includes all formal reports in the NUREG series prepared by the NRC staff and contractors; proceedings of conferences and workshops; as well as international agreement reports. The entries in this compilation are indexed for access by title and abstract, secondary report number, personal author, subject, NRC organization for staff and international agreements, contractor, international organization, and licensed facility.

NONE

1997-10-01T23:59:59.000Z

264

CompilerDirected Dynamic Voltage Scaling for MemoryBound Applications ChungHsing Hsu and Ulrich Kremer #  

E-Print Network [OSTI]

that effectively reduces the energy usage of memorybound applications via dynamic voltage scaling (DVS measurements on a laptop with a 600 MHz 1.2 GHz AMD Athlon 4 processor show that CPU energy savings which attempts to approximate the minimum energy usage by any DVS algorithm. Our compilerdirected DVS

Kremer, Ulrich

265

This paper reviews a set of techniques for compiling dataflow-based, graphical programs for embedded signal  

E-Print Network [OSTI]

dataflow (SDF) [15] to specify the system, and to do code-generation starting from this specification. One flow of the specification, and this can be profitably exploited by the compiler. SDF [15] is a special case of dataflow. In SDF, a pro- gram is represented by a directed graph in which each ver- tex (actor

266

First Thoughts on Commissioning of the TESLA Compiled by P. Castro for the TESLA commissioning study group.  

E-Print Network [OSTI]

First Thoughts on Commissioning of the TESLA Collider Compiled by P. Castro for the TESLA commissioning study group. September 6, 2002 Abstract The TESLA collider[1] is a large scale project be included in the plans of the construction and installation work of the TESLA collider. A working group

267

Regulatory and technical reports (abstract index journal), Compilation for third quarter 1993, July--September. Volume 18, No. 3  

SciTech Connect (OSTI)

This journal includes all formal reports in the NUREG series prepared by the NRC staff and contractors, proceedings of conferences and workshops, grants, and international agreement reports. The entries in this compilation are indexed for access by title and abstract, secondary report number, personal author, subject, NRC organization for staff and international agreements, contractor, international organization, and licensed facility.

Not Available

1993-11-01T23:59:59.000Z

268

Development of Li+ alumino-silicate ion source  

E-Print Network [OSTI]

yellow line) from a ?-Spodumene Li test source, operated atexceeding 1200 0 C. ?-spodumene and ? eucryptite Li sourcesdeveloping high quality ?-spodumene and ?-eucryptite Li ion

Roy, P.K.

2009-01-01T23:59:59.000Z

269

BUILDING 96 RECOMMENDATION FOR SOURCE AREA REMEDIATION  

E-Print Network [OSTI]

OU III BUILDING 96 RECOMMENDATION FOR SOURCE AREA REMEDIATION FINAL Prepared by: Brookhaven FOR U.S. Department of Energy March 2009 #12;i OU III BUILDING 96 RECOMMENDATION FOR SOURCE AREA..................................................................................................................4 4.0 Building 96 ­ Operational Background

270

Hermitian Young operators  

SciTech Connect (OSTI)

Starting from conventional Young operators, we construct Hermitian operators which project orthogonally onto irreducible representations of the (special) unitary group.

Keppeler, Stefan, E-mail: stefan.keppeler@uni-tuebingen.de [Mathematisches Institut, Universitt Tbingen, Auf der Morgenstelle 10, 72076 Tbingen (Germany)] [Mathematisches Institut, Universitt Tbingen, Auf der Morgenstelle 10, 72076 Tbingen (Germany); Sjdahl, Malin, E-mail: malin.sjodahl@thep.lu.se [Department of Astronomy and Theoretical Physics, Lund University, Slvegatan 14A, 22362 Lund (Sweden)] [Department of Astronomy and Theoretical Physics, Lund University, Slvegatan 14A, 22362 Lund (Sweden)

2014-02-15T23:59:59.000Z

271

Infrared source test  

SciTech Connect (OSTI)

The purpose of the Infrared Source Test (IRST) is to demonstrate the ability to track a ground target with an infrared sensor from an airplane. The system is being developed within the Advance Technology Program`s Theater Missile Defense/Unmanned Aerial Vehicle (UAV) section. The IRST payload consists of an Amber Radiance 1 infrared camera system, a computer, a gimbaled mirror, and a hard disk. The processor is a custom R3000 CPU board made by Risq Modular Systems, Inc. for LLNL. The board has ethernet, SCSI, parallel I/O, and serial ports, a DMA channel, a video (frame buffer) interface, and eight MBytes of main memory. The real-time operating system VxWorks has been ported to the processor. The application code is written in C on a host SUN 4 UNIX workstation. The IRST is the result of a combined effort by physicists, electrical and mechanical engineers, and computer scientists.

Ott, L.

1994-11-15T23:59:59.000Z

272

Process centrifuge operating problems and equipment failures in canyon reprocessing facilities at the Savannah River Site  

SciTech Connect (OSTI)

The Savannah River Laboratory (SRL) maintains a compilation of operating problems and equipment failures that have occurred in the fuel reprocessing areas of the Savannah River Site (SRS). At present, the data bank contains more than 230,000 entries ranging from minor equipment malfunctions to incidents with the potential for injury or contamination of personnel, or for economic loss. The data bank has been used extensively for a wide variety of purposes, such as failure analyses, trend analyses, and preparation of safety analyses. Typical of the data are problems associated with the canyon process centrifuges. This report contains a compilation of the centrifuge operating problems and equipment failures primarily as an aid to organizations with related equipment. Publication of these data was prompted by a number of requests for this information by other Department of Energy (DOE) sites. 11 refs., 2 figs., 4 tabs.

Durant, W.S.; Baughman, D.F.

1990-03-01T23:59:59.000Z

273

Inside the Hotline: A compilation of 1991 monthly Hotline reports. Annual report  

SciTech Connect (OSTI)

The Resource Conservation and Recovery Act (RCRA)/Superfund (SF)/Office of Underground Storage Tanks (OUST) and Emergency Planning and Community Right-to-Know (EPCRA) Hotlines were established to respond to inquiries from the regulated community and the public concerning waste management and disposal regulations. The Hotline also serves as a referral point on the availability and distribution of program related documents and published materials. The document is a compilation of questions and answers, Federal Register summaries from individual Monthly Hotline Reports for the period of January to December 1991. It also contains user-friendly indices which are arranged according to subject matter, regulatory and statory citations. The document can be used by its reader to explore the application of the regulations in different scenarios or to shed light on complex issues. Neither the questions nor the FR summaries are intended to fully represent or be used in place of the regulations. For an understanding of the actual regulatory requirements in any given situation, the reader must consult the appropriate sections of Title 40 of the Code of Federal Regulations, pertinent FR and EPA guidance documents, as well as relevant State regulations.

Not Available

1992-03-01T23:59:59.000Z

274

Human retroviruses and AIDS 1996. A compilation and analysis of nucleic acid and amino acid sequences  

SciTech Connect (OSTI)

This compendium and the accompanying floppy diskettes are the result of an effort to compile and rapidly publish all relevant molecular data concerning the human immunodeficiency viruses (HIV) and related retroviruses. The scope of the compendium and database is best summarized by the five parts that it comprises: (1) Nuclear Acid Alignments and Sequences; (2) Amino Acid Alignments; (3) Analysis; (4) Related Sequences; and (5) Database Communications. Information within all the parts is updated throughout the year on the Web site, http://hiv-web.lanl.gov. While this publication could take the form of a review or sequence monograph, it is not so conceived. Instead, the literature from which the database is derived has simply been summarized and some elementary computational analyses have been performed upon the data. Interpretation and commentary have been avoided insofar as possible so that the reader can form his or her own judgments concerning the complex information. In addition to the general descriptions of the parts of the compendium, the user should read the individual introductions for each part.

Myers, G.; Foley, B.; Korber, B. [eds.] [Los Alamos National Lab., NM (United States). Theoretical Div.] [eds.; Los Alamos National Lab., NM (United States). Theoretical Div.; Mellors, J.W. [ed.] [Univ. of Pittsburgh, PA (United States)] [ed.; Univ. of Pittsburgh, PA (United States); Jeang, K.T. [ed.] [National Institutes of Health, Bethesda, MD (United States). Molecular Virology Section] [ed.; National Institutes of Health, Bethesda, MD (United States). Molecular Virology Section; Wain-Hobson, S. [Pasteur Inst., Paris (France)] [ed.] [Pasteur Inst., Paris (France); ed.

1997-04-01T23:59:59.000Z

275

Miniature electrically operated diaphragm valve  

DOE Patents [OSTI]

The present invention provides a miniature electrically operated valve that can stand off significant pressures, that can be inexpensively produced, and that can be made to operate without continuous electrical power. A valve according to the present invention comprises a housing and a beam mounted with the housing. A diaphragm mounted with the housing forms a sealed fluid volume. An electromagnetic energy source, such as an electromagnetic coil, mounts with the housing and when energized urges the beam in one direction. The beam can be urged in the opposing direction by passive means or by reversing the polarity of the electromagnetic energy source or by a second electromagnetic energy source. Two fluid ports mount with the housing. A first fluid port mounts so that, as the beam is urged in one direction or the opposite, the beam urges the diaphragm to move between engaging and substantially sealing the fluid port and disengaging and not substantially sealing the fluid port. A seat can be mounted with the diaphragm to aid in sealing the fluid port. Latching mechanisms such as permanent magnets can be mounted so that the valve remains in the open or closed positions without continuous electrical power input. Fluid can flow through the housing between the two fluid ports when the diaphragm does not seal the first fluid port, but can be prevented from flowing by urging the beam so that the diaphragm seals the first fluid port. Various embodiments accommodate various latching mechanisms, electromagnetic energy sources, number of fluid ports, and diaphragm design considerations.

Adkins, Douglas R. (Albuquerque, NM); Spletzer, Barry L. (Albuquerque, NM); Wong, Chungnin C. (Albuquerque, NM); Frye-Mason, Gregory C. (Cedar Crest, NM); Fischer, Gary J. (Albuquerque, NM); Hesketh, Peter J. (Atlanta, GA)

2001-01-01T23:59:59.000Z

276

Information systems and technology transfer programs on geothermal energy and other renewable sources of energy  

SciTech Connect (OSTI)

In order to remain competitive, it is necessary to stay informed and use the most advanced technologies available. Recent developments in communication, like the Internet and the World Wide Web, enormously facilitate worldwide data and technology transfer. A compilation of the most important sources of data on renewable energies, especially geothermal, as well as lists of relevant technology transfer programs are presented. Information on how to gain access to, and learn more about them, is also given.

Lippmann, M.J.; Antunez, E.

1996-01-01T23:59:59.000Z

277

Information systems and technology transfer programs on geothermal energy and other renewable sources of energy  

SciTech Connect (OSTI)

In order to remain competitive it is necessary to stay informed and use the most advanced technologies available. Recent developments in communication, like the Internet and the World Wide Web, enormously facilitate worldwide data and technology transfer. A compilation of the most important sources of data on renewable energies, especially geothermal, as well as lists of relevant technology transfer programs are presented. Information on how to gain access to, and learn more about them is also given.

Lippmann, Marcelo J.; Antunez, Emilio u.

1996-01-24T23:59:59.000Z

278

Formally Specifying and Proving Operational Aspects of Forensic Lucid in Isabelle  

E-Print Network [OSTI]

A Forensic Lucid intensional programming language has been proposed for intensional cyberforensic analysis. In large part, the language is based on various predecessor and codecessor Lucid dialects bound by the higher-order intensional logic (HOIL) that is behind them. This work formally specifies the operational aspects of the Forensic Lucid language and compiles a theory of its constructs using Isabelle, a proof assistant system.

Mokhov, Serguei A

2009-01-01T23:59:59.000Z

279

SUBTASK 2.19 OPERATIONAL FLEXIBILITY OF CO2 TRANSPORT AND STORAGE  

SciTech Connect (OSTI)

Carbon dioxide (CO2) is produced in large quantities during electricity generation and by industrial processes. These CO2 streams vary in terms of both composition and mass flow rate, sometimes substantially. The impact of a varying CO2 stream on pipeline and storage operation is not fully understood in terms of either operability or infrastructure robustness. This study was performed to summarize basic background from the literature on the topic of operational flexibility of CO2 transport and storage, but the primary focus was on compiling real-world lessons learned about flexible operation of CO2 pipelines and storage from both large-scale field demonstrations and commercial operating experience. Modeling and pilot-scale results of research in this area were included to illustrate some of the questions that exist relative to operation of carbon capture and storage (CCS) projects with variable CO2 streams. It is hoped that this reports real-world findings provide readers with useful information on the topic of transport and storage of variable CO2 streams. The real-world results were obtained from two sources. The first source consisted of five full-scale, commercial transportstorage projects: Sleipner, Snhvit, In Salah, Weyburn, and Illinois BasinDecatur. These scenarios were reviewed to determine the information that is available about CO2 stream variability/intermittency on these demonstration-scale projects. The five projects all experienced mass flow variability or an interruption in flow. In each case, pipeline and/or injection engineers were able to accommodate any issues that arose. Significant variability in composition has not been an issue at these five sites. The second source of real- world results was telephone interviews conducted with experts in CO2 pipeline transport, injection, and storage during which commercial anecdotal information was acquired to augment that found during the literature search of the five full-scale projects. The experts represented a range of disciplines and hailed from North America and Europe. Major findings of the study are that compression and transport of CO2 for enhanced oil recovery (EOR) purposes in the United States has shown that impurities are not likely to cause transport problems if CO2 stream composition standards are maintained and pressures are kept at 10.3 MPa or higher. Cyclic, or otherwise intermittent, CO2 supplies historically have not impacted in-field distribution pipeline networks, wellbore integrity, or reservoir conditions. The U.S. EOR industry has demonstrated that it is possible to adapt to variability and intermittency in CO2 supply through flexible operation of the pipeline and geologic storage facility. This CO2 transport and injection experience represents knowledge that can be applied in future CCS projects. A number of gaps in knowledge were identified that may benefit from future research and development, further enhancing the possibility for widespread application of CCS. This project was funded through the Energy & Environmental Research CenterU.S. Department of Energy Joint Program on Research and Development for Fossil Energy-Related Resources Cooperative Agreement No. DE-FC26-08NT43291. Nonfederal funding was provided by the IEA Greenhouse Gas R&D Programme.

Jensen, Melanie; Schlasner, Steven; Sorensen, James; Hamling, John

2014-12-31T23:59:59.000Z

280

Re-sourcing manufacturing processes in metal forming operations  

E-Print Network [OSTI]

Deciding which activities to conduct in-house and which to outsource has become increasingly important due to its implications on a company's supply chain and overall business model. A number of factors can lead a company ...

Holtz, Heath M. (Heath Mikal)

2005-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "operations sources compiled" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

International workshop on cold neutron sources  

SciTech Connect (OSTI)

The first meeting devoted to cold neutron sources was held at the Los Alamos National Laboratory on March 5--8, 1990. Cosponsored by Los Alamos and Oak Ridge National Laboratories, the meeting was organized as an International Workshop on Cold Neutron Sources and brought together experts in the field of cold-neutron-source design for reactors and spallation sources. Eighty-four people from seven countries attended. Because the meeting was the first of its kind in over forty years, much time was spent acquainting participants with past and planned activities at reactor and spallation facilities worldwide. As a result, the meeting had more of a conference flavor than one of a workshop. The general topics covered at the workshop included: Criteria for cold source design; neutronic predictions and performance; energy deposition and removal; engineering design, fabrication, and operation; material properties; radiation damage; instrumentation; safety; existing cold sources; and future cold sources.

Russell, G.J.; West, C.D. (comps.) (Los Alamos National Lab., NM (United States)) [comps.; Los Alamos National Lab., NM (United States)

1991-08-01T23:59:59.000Z

282

Miniature x-ray source  

DOE Patents [OSTI]

A miniature x-ray source capable of producing broad spectrum x-ray emission over a wide range of x-ray energies. The miniature x-ray source comprises a compact vacuum tube assembly containing a cathode, an anode, a high voltage feedthru for delivering high voltage to the anode, a getter for maintaining high vacuum, a connection for an initial vacuum pump down and crimp-off, and a high voltage connection for attaching a compact high voltage cable to the high voltage feedthru. At least a portion of the vacuum tube wall is highly x-ray transparent and made, for example, from boron nitride. The compact size and potential for remote operation allows the x-ray source, for example, to be placed adjacent to a material sample undergoing analysis or in proximity to the region to be treated for medical applications.

Trebes, James E. (Livermore, CA); Stone, Gary F. (Livermore, CA); Bell, Perry M. (Tracy, CA); Robinson, Ronald B. (Modesto, CA); Chornenky, Victor I. (Minnetonka, MN)

2002-01-01T23:59:59.000Z

283

Compact portable electric power sources  

SciTech Connect (OSTI)

This report provides an overview of recent advances in portable electric power source (PEPS) technology and an assessment of emerging PEPS technologies that may meet US Special Operations Command`s (SOCOM) needs in the next 1--2- and 3--5-year time frames. The assessment was performed through a literature search and interviews with experts in various laboratories and companies. Nineteen PEPS technologies were reviewed and characterized as (1) PEPSs that meet SOCOM requirements; (2) PEPSs that could fulfill requirements for special field conditions and locations; (3) potentially high-payoff sources that require additional R and D; and (4) sources unlikely to meet present SOCOM requirements. 6 figs., 10 tabs.

Fry, D.N.; Holcomb, D.E.; Munro, J.K.; Oakes, L.C.; Matson, M.J.

1997-02-01T23:59:59.000Z

284

Operations and compositions in transrecursive operators  

SciTech Connect (OSTI)

The present study is a continuation of a study focusing on introduction and analysis of operations on transrecursive operators, which are similar to the operators considered in the theory of algorithms. Such operations may be standard product of algorithms) or special ({alpha}-disjunction and {alpha}-iteration. In some respects, these operations in the class of transrecursive operators are similar to their traditional analogs. In other respects, however, they are essentially different. For instance, they may have different types and modes. Specific features of operations on transrecursive operators are attributable to explicit omission of some restrictions on their construction compared with the construction of algorithms. The standard approaches to mathematical modeling of the concept of algorithm assume a number of essential restrictions. Specifically, they assume finiteness of (1) the input data arriving during a finite time interval; (2) the list of rules underlying the operations of the algorithm; (3) the transformations executed by a single operation; (4) the description of each rule; (5) the time to execute one operation; (6) the time to execute one operation; (7) the number of cycles that the algorithm executes in order to realize the mapping. In application to Turing machines, these restrictions imply finiteness of the initial word, finiteness of the command table of the read head, and ultimate stopping when the result is obtained after finitely many steps. Various classes of transrecursive operators are constructed by dropping various combinations of the {open_quotes}finiteness{close_quotes} restrictions. Two classes of transrecursive operators - the limit (inductive) Turing machines and transalgorithms - have been obtained by dropping respectively the assumption of finiteness of the number of execution cycles and the assumption of finiteness of the list of rules.

Burgin, M.S.; Borodyanskii, Yu.M.

1995-03-01T23:59:59.000Z

285

Gulf Coast geopressured-geothermal program summary report compilation. Volume 4: Bibliography (annotated only for all major reports)  

SciTech Connect (OSTI)

This bibliography contains US Department of Energy sponsored Geopressured-Geothermal reports published after 1984. Reports published prior to 1984 are documented in the Geopressured Geothermal bibliography Volumes 1, 2, and 3 that the Center for Energy Studies at the University of Texas at Austin compiled in May 1985. It represents reports, papers and articles covering topics from the scientific and technical aspects of geopressured geothermal reservoirs to the social, environmental, and legal considerations of exploiting those reservoirs for their energy resources.

John, C.J.; Maciasz, G.; Harder, B.J.

1998-06-01T23:59:59.000Z

286

Operating Permits (New Jersey)  

Broader source: Energy.gov [DOE]

The owner or operator of a facility subject to this article shall obtain and maintain an operating permit for the facility. The owner or operator of a facility subject to this article shall ensure...

287

Cogeneration Operational Issues  

E-Print Network [OSTI]

operations. Other operational issues also include utility transmission planning, generation planning and fuel mix decisions. All of these operational problems have an impact on the ratepayer in regard to quality of electric service and future rates. Both...

Williams, M.

288

Air Carrier Flight Operations  

E-Print Network [OSTI]

Most air carriers operate under a system of prioritized goals including safety, customer service (on-time departures and arrivals) and operating economics. The flight operations department is responsible for the safe and ...

Midkif, Alan H.

289

Heat Transfer Operators Associated with Quantum Operations  

E-Print Network [OSTI]

Any quantum operation applied on a physical system is performed as a unitary transformation on a larger extended system. If the extension used is a heat bath in thermal equilibrium, the concomitant change in the state of the bath necessarily implies a heat exchange with it. The dependence of the average heat transferred to the bath on the initial state of the system can then be found from the expectation value of a hermitian operator, which is named as the heat transfer operator (HTO). The purpose of this article is the investigation of the relation between the HTOs and the associated quantum operations. Since, any given quantum operation on a system can be realized by different baths and unitaries, many different HTOs are possible for each quantum operation. On the other hand, there are also strong restrictions on the HTOs which arise from the unitarity of the transformations. The most important of these is the Landauer erasure principle. This article is concerned with the question of finding a complete set of restrictions on the HTOs that are associated with a given quantum operation. An answer to this question has been found only for a subset of quantum operations. For erasure operations, these characterizations are equivalent to the generalized Landauer erasure principle. For the case of generic quantum operations however, it appears that the HTOs obey further restrictions which cannot be obtained from the entropic restrictions of the generalized Landauer erasure principle.

. Aksak; S. Turgut

2011-04-14T23:59:59.000Z

290

Building Operator Certification  

E-Print Network [OSTI]

Building Operator Certification Energy Efficiency through Operator Training CATEE December 18, 2013 San Antonio, TX Dennis Lilley, CEM, PMP ESL-KT-13-12-49 CATEE 2013: Clean Air Through Energy Efficiency Conference, San Antonio, Texas Dec. 16...-18 Building Operator Certification Energy Efficiency through Operator Training What is Building Operator Certification? Industry-recognized credential in energy efficient building operation practices Created with 100 industry experts Launched in 1996 9...

Lilley, D.

2013-01-01T23:59:59.000Z

291

Operations Research Analyst  

Broader source: Energy.gov [DOE]

The incumbent in this position will serve as an Operations Research Analyst in the Generation Scheduling (PGS). The Operations Research Analyst is responsible for analytical work that involves...

292

Electrolytes for power sources  

DOE Patents [OSTI]

Electrolytes are disclosed for power sources, particularly alkaline and acidic power sources, comprising benzene polysulfonic acids and benzene polyphosphonic acids or salts of such acids. 7 figures.

Doddapaneni, N.; Ingersoll, D.

1995-01-03T23:59:59.000Z

293

Protected Water Sources (Iowa)  

Broader source: Energy.gov [DOE]

This chapter designates protected water sources, which are subject to additional special conditions regarding water use. Permit applications for water withdrawals from these sources may still be...

294

Backscatter absorption gas imaging systems and light sources therefore  

DOE Patents [OSTI]

The location of gases that are not visible to the unaided human eye can be determined using tuned light sources that spectroscopically probe the gases and cameras that can provide images corresponding to the absorption of the gases. The present invention is a light source for a backscatter absorption gas imaging (BAGI) system, and a light source incorporating the light source, that can be used to remotely detect and produce images of "invisible" gases. The inventive light source has a light producing element, an optical amplifier, and an optical parametric oscillator to generate wavelength tunable light in the IR. By using a multi-mode light source and an amplifier that operates using 915 nm pump sources, the power consumption of the light source is reduced to a level that can be operated by batteries for long periods of time. In addition, the light source is tunable over the absorption bands of many hydrocarbons, making it useful for detecting hazardous gases.

Kulp, Thomas Jan (Livermore, CA); Kliner, Dahv A. V. (San Ramon, CA); Sommers, Ricky (Oakley, CA); Goers, Uta-Barbara (Campbell, NY); Armstrong, Karla M. (Livermore, CA)

2006-12-19T23:59:59.000Z

295

Research on fusion neutron sources  

SciTech Connect (OSTI)

The use of fusion devices as powerful neutron sources has been discussed for decades. Whereas the successful route to a commercial fusion power reactor demands steady state stable operation combined with the high efficiency required to make electricity production economic, the alternative approach to advancing the use of fusion is free of many of complications connected with the requirements for economic power generation and uses the already achieved knowledge of Fusion physics and developed Fusion technologies. 'Fusion for Neutrons' (F4N), has now been re-visited, inspired by recent progress achieved on comparably compact fusion devices, based on the Spherical Tokamak (ST) concept. Freed from the requirement to produce much more electricity than used to drive it, a fusion neutron source could be efficiently used for many commercial applications, and also to support the goal of producing energy by nuclear power. The possibility to use a small or medium size ST as a powerful or intense steady-state fusion neutron source (FNS) is discussed in this paper in comparison with the use of traditional high aspect ratio tokamaks. An overview of various conceptual designs of compact fusion neutron sources based on the ST concept is given and they are compared with a recently proposed Super Compact Fusion Neutron Source (SCFNS), with major radius as low as 0.5 metres but still able to produce several MW of neutrons in a steady-state regime.

Gryaznevich, M. P. [Tokamak Solutions UK, Culham Science Centre, Abingdon, OXON, OX133DB (United Kingdom)

2012-06-19T23:59:59.000Z

296

200-BP-5 operable unit treatability test report  

SciTech Connect (OSTI)

The 200-BP-5 Operable Unit was established in response to recommendations presented in the 200 East Groundwater Aggregate Area Management Study Report (AAMSR) (DOE-RL 1993a). Recognizing different approaches to remediation, the groundwater AAMSR recommended separating groundwater from source and vadose zone operable units and subdividing 200 East Area groundwater into two operable units. The division between the 200-BP-5 and 200-PO-1 Operable Units was based principally on source operable unit boundaries and distribution of groundwater plumes derived from either B Plant or Plutonium/Uranium Extraction (PUREX) Plant liquid waste disposal sites.

NONE

1996-04-01T23:59:59.000Z

297

Journal of Applied Ecology 2009, 46, 511515 doi: 10.1111/j.1365-2664.2009.01641.x 2009 The Author. Journal compilation 2009 British Ecological Society  

E-Print Network [OSTI]

. Keywords: Baiji, Beshanzu fir, biodiversity conservation, China, economic growth, environmental protection The Author. Journal compilation 2009 British Ecological Society Blackwell Publishing Ltd FORUM Priceof prosperity:economicdevelopmentandbiological conservation in China ( ) Fangliang He Department of Renewable

He, Fangliang

298

Portable Source Identification Device  

SciTech Connect (OSTI)

U.S. Customs and Border Protection (CBP) is the primary enforcement agency protecting the nations ports of entry. CBP is enhancing its capability to interdict the illicit import of nuclear and radiological materials and devices that may be used by terrorists. Pacific Northwest National Laboratory (PNNL) is providing scientific and technical support to CBP in their goal to enable rapid deployment of nuclear and radiation detection systems at U. S. ports of entry to monitor 100% of the incoming international traffic and cargo while not adversely impacting the operations or throughput of the ports. As the deployment of radiation detection systems proceeds, there is a need to adapt the baseline radiation portal monitor (RPM) system technology to operations at these diverse ports of entry. When screening produces an alarm in the primary inspection RPM, the alarming vehicle is removed from the flow of commerce and the alarm is typically confirmed in a secondary inspection RPM. The portable source identification device (PSID) is a radiation sensor panel (RSP), based on thallium-doped sodium iodide (NaI(Tl)) scintillation detector and gamma spectroscopic analysis hardware and software, mounted on a scissor lift on a small truck. The lift supports a box containing a commercial off-the-shelf (COTS) sodium iodide detector that provides real-time isotopic identification, including neutron detectors to interdict Weapons of Mass Destruction (WMD) and radiation dispersion devices (RDD). The scissor lift will lower the detectors to within a foot off the ground and raise them to approximately 24 feet in the air, allowing a wide vertical scanning range.

Andersen, Eric S.; Samuel, Todd J.; Gervais, Kevin L.

2005-08-01T23:59:59.000Z

299

NUCLEAR PLANT OPERATIONS AND  

E-Print Network [OSTI]

NUCLEAR PLANT OPERATIONS AND CONTROL KEYWORDS: neutron flux, cur- rent noise, vibration diagnostics: Swedish Nuclear Powe

Pzsit, Imre

300

Miniaturized cathodic arc plasma source  

DOE Patents [OSTI]

A cathodic arc plasma source has an anode formed of a plurality of spaced baffles which extend beyond the active cathode surface of the cathode. With the open baffle structure of the anode, most macroparticles pass through the gaps between the baffles and reflect off the baffles out of the plasma stream that enters a filter. Thus the anode not only has an electrical function but serves as a prefilter. The cathode has a small diameter, e.g. a rod of about 1/4 inch (6.25 mm) diameter. Thus the plasma source output is well localized, even with cathode spot movement which is limited in area, so that it effectively couples into a miniaturized filter. With a small area cathode, the material eroded from the cathode needs to be replaced to maintain plasma production. Therefore, the source includes a cathode advancement or feed mechanism coupled to cathode rod. The cathode also requires a cooling mechanism. The movable cathode rod is housed in a cooled metal shield or tube which serves as both a current conductor, thus reducing ohmic heat produced in the cathode, and as the heat sink for heat generated at or near the cathode. Cooling of the cathode housing tube is done by contact with coolant at a place remote from the active cathode surface. The source is operated in pulsed mode at relatively high currents, about 1 kA. The high arc current can also be used to operate the magnetic filter. A cathodic arc plasma deposition system using this source can be used for the deposition of ultrathin amorphous hard carbon (a-C) films for the magnetic storage industry.

Anders, Andre (Albany, CA); MacGill, Robert A. (Richmond, CA)

2003-04-15T23:59:59.000Z

Note: This page contains sample records for the topic "operations sources compiled" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Operator pencil passing through a given operator  

SciTech Connect (OSTI)

Let ? be a linear differential operator acting on the space of densities of a given weight ?{sub 0} on a manifold M. One can consider a pencil of operators ?-circumflex(?)=(?{sub ?}) passing through the operator ? such that any ?{sub ?} is a linear differential operator acting on densities of weight ?. This pencil can be identified with a linear differential operator ?-circumflex acting on the algebra of densities of all weights. The existence of an invariant scalar product in the algebra of densities implies a natural decomposition of operators, i.e., pencils of self-adjoint and anti-self-adjoint operators. We study lifting maps that are on one hand equivariant with respect to divergenceless vector fields, and, on the other hand, with values in self-adjoint or anti-self-adjoint operators. In particular, we analyze the relation between these two concepts, and apply it to the study of diff?(M)-equivariant liftings. Finally, we briefly consider the case of liftings equivariant with respect to the algebra of projective transformations and describe all regular self-adjoint and anti-self-adjoint liftings. Our constructions can be considered as a generalisation of equivariant quantisation.

Biggs, A., E-mail: khudian@manchester.ac.uk, E-mail: adam.biggs@student.manchester.ac.uk; Khudaverdian, H. M., E-mail: khudian@manchester.ac.uk, E-mail: adam.biggs@student.manchester.ac.uk [School of Mathematics, University of Manchester, Oxford Road, Manchester M13 9PL (United Kingdom)

2013-12-15T23:59:59.000Z

302

Oswer source book. Volume 1. Training and technology transfer resources, 1992-1993  

SciTech Connect (OSTI)

Volumes I and II of The OSWER Source Book provide information on the many training courses, publications, videotapes, and information systems and software available to support EPA staff, State and local agencies, and others involved in managing the Nation's hazardous and solid waste programs. The Office of Solid Waste and Emergency Response's (OSWER) Technology Innovation Office (TIO) has compiled listings of the most significant training and technology transfer resources available to assist individuals with the responsibility for accomplishing OSWER's mission. Volume I of The Source Book contains listings of OSWER and other office training courses, publications, videotapes, information systems and software, and support programs devoted to hazardous and solid waste issues.

Not Available

1992-09-01T23:59:59.000Z

303

1987 DOE review: First collider run operation  

SciTech Connect (OSTI)

This review covers the operations of the first run of the 1.8 TeV superconducting super collider. The papers enclosed cover: PBAR source status, fixed target operation, Tevatron cryogenic reliability and capacity upgrade, Tevatron Energy upgrade progress and plans, status of the D0 low beta insertion, 1.8 K and 4.7 K refrigeration for low-..beta.. quadrupoles, progress and plans for the LINAC and booster, near term and long term and long term performance improvements.

Childress, S.; Crawford, J.; Dugan, G.; Edwards, H.; Finley, D.A.; Fowler, W.B.; Harrison, M.; Holmes, S.; Makara, J.N.; Malamud, E.

1987-05-01T23:59:59.000Z

304

Atmospheric sampling glow discharge ionization source  

DOE Patents [OSTI]

An atmospheric sampling glow discharge ionization source that can be used in combination with an analytical instrument which operates at high vacuum, such as a mass spectrometer. The atmospheric sampling glow discharge ionization source comprises a chamber with at least one pair of electrodes disposed therein, an inlet for a gaseous sample to be analyzed and an outlet communicating with an analyzer which operates at subatmospheric pressure. The ionization chamber is maintained at a pressure below atmospheric pressure, and a voltage difference is applied across the electrodes to induce a glow discharge between the electrodes, so that molecules passing through the inlet are ionized by the glow discharge and directed into the analyzer. The ionization source accepts the sample under atmospheric pressure conditions and processes it directly into the high vacuum instrument, bridging the pressure gap and drawing off unwanted atmospheric gases. The invention also includes a method for analyzing a gaseous sample using the glow discharge ionization source described above. 3 figs.

McLuckey, S.A.; Glish, G.L.

1989-07-18T23:59:59.000Z

305

Cryogenic hydrogen circulation system of neutron source  

SciTech Connect (OSTI)

Cold neutron sources of reactors and spallation neutron sources are classic high flux neutron sources in operation all over the world. Cryogenic fluids such as supercritical or supercooled hydrogen are commonly selected as a moderator to absorb the nuclear heating from proton beams. By comparing supercritical hydrogen circulation systems and supercooled hydrogen circulation systems, the merits and drawbacks in both systems are summarized. When supercritical hydrogen circulates as the moderator, severe pressure fluctuations caused by temperature changes will occur. The pressure control system used to balance the system pressure, which consists of a heater as an active controller for thermal compensation and an accumulator as a passive volume controller, is preliminarily studied. The results may provide guidelines for design and operation of other cryogenic hydrogen system for neutron sources under construction.

Qiu, Y. N. [Institute of Physics and Chemistry, Chinese Academy of Sciences, BJ100190 China and University of Chinese Academy of Sciences, Chinese Academy of Sciences, BJ100049 (China); Hu, Z. J.; Wu, J. H.; Li, Q.; Zhang, Y. [Institute of Physics and Chemistry, Chinese Academy of Sciences, BJ100190 (China); Zhang, P. [School of Energy and Power Engineering, HuaZhong University of Science and Technology, WH430074 (China); Wang, G. P. [Institute of High Energy Physics, Chinese Academy of Sciences, BJ100049 (China)

2014-01-29T23:59:59.000Z

306

GEOMETRIC SOURCE SEPARATION: MERGING CONVOLUTIVE SOURCE  

E-Print Network [OSTI]

adaptive beamforming algorithms by a cross-power criteria, we gain new geometric source separation with convo- lutive blind source separation. We concentrate on cross-power spectral min- imization which is su to ambiguities in the choice of separating lters. There are in theory multiple lters that invert the room

Parra, Lucas C.

307

2007 The Authors Journal compilation 2007 The Royal Entomological Society 423  

E-Print Network [OSTI]

budworm, has a freeze-avoidance strategy for overwintering. Such insects can produce low molecular weight cryoprotectants to lower the freezing point of their haemolymph, avoid the initiation of ice growth by sealing sources, and even produce heat shock proteins (Hsps) and other stress proteins for protection against cold

Qin, Wensheng

308

Multiple source/multiple target fluid transfer apparatus  

DOE Patents [OSTI]

A fluid transfer apparatus includes: a) a plurality of orifices for connection with fluid sources; b) a plurality of orifices for connection with fluid targets; c) a set of fluid source conduits and fluid target conduits associated with the orifices; d) a pump fluidically interposed between the source and target conduits to transfer fluid therebetween; e) a purge gas conduit in fluid communication with the fluid source conduits, fluid target conduits and pump to receive and pass a purge gas under pressure; f) a solvent conduit in fluid communication with the fluid source conduits, fluid target conduits and pump to receive and pass solvent, the solvent conduit including a solvent valve; g) pump control means for controlling operation of the pump; h) purge gas valve control means for controlling operation of the purge gas valve to selectively impart flow of purge gas to the fluid source conduits, fluid target conduits and pump; i) solvent valve control means for controlling operation of the solvent valve to selectively impart flow of solvent to the fluid source conduits, fluid target conduits and pump; and j) source and target valve control means for controlling operation of the fluid source conduit valves and the fluid target conduit valves to selectively impart passage of fluid between a selected one of the fluid source conduits and a selected one of the fluid target conduits through the pump and to enable passage of solvent or purge gas through selected fluid source conduits and selected fluid target conduits.

Turner, Terry D. (Idaho Falls, ID)

1997-01-01T23:59:59.000Z

309

Multiple source/multiple target fluid transfer apparatus  

DOE Patents [OSTI]

A fluid transfer apparatus includes: (a) a plurality of orifices for connection with fluid sources; (b) a plurality of orifices for connection with fluid targets; (c) a set of fluid source conduits and fluid target conduits associated with the orifices; (d) a pump fluidically interposed between the source and target conduits to transfer fluid there between; (e) a purge gas conduit in fluid communication with the fluid source conduits, fluid target conduits and pump to receive and pass a purge gas under pressure; (f) a solvent conduit in fluid communication with the fluid source conduits, fluid target conduits and pump to receive and pass solvent, the solvent conduit including a solvent valve; (g) pump control means for controlling operation of the pump; (h) purge gas valve control means for controlling operation of the purge gas valve to selectively impart flow of purge gas to the fluid source conduits, fluid target conduits and pump; (i) solvent valve control means for controlling operation of the solvent valve to selectively impart flow of solvent to the fluid source conduits, fluid target conduits and pump; and (j) source and target valve control means for controlling operation of the fluid source conduit valves and the fluid target conduit valves to selectively impart passage of fluid between a selected one of the fluid source conduits and a selected one of the fluid target conduits through the pump and to enable passage of solvent or purge gas through selected fluid source conduits and selected fluid target conduits. 6 figs.

Turner, T.D.

1997-08-26T23:59:59.000Z

310

Licensee Event Report (LER) compilation for month of February 1984. Vol. 3, No. 2  

SciTech Connect (OSTI)

This monthly report contains LER operational information that was processed into the LER data file of the Nuclear Safety Information Center (NSIC) during this period. The LER summaries are arranged alphabetically by facility name and then chronologically by event date for each facility. Component, system, keyword, and component vendor indexes follow the summaries.

Not Available

1984-03-01T23:59:59.000Z

311

Knowledges and abilities catalog for nuclear power plant operators: pressurized water reactors  

SciTech Connect (OSTI)

This document catalogs roughly 5300 knowledges and abilities of reactor operators and senior reactor operators. It results from a reanalysis of much larger job-task analysis data base compiled by the Institute of Nuclear Power Operations (INPO). Knowledges and abilities are cataloged for 45 major power plant systems and 38 emergency evolutions, grouped according to 11 fundamental safety functions (e.g., reactivity control and reactor coolant system inventory control). With appropriate sampling from this catalog, operator licensing examinations having content validity can be developed. A structured sampling procedure for this catalog is under development by the Nuclear Regulatory Commission (NRC) and will be published as a companion document, ''Examiners' Handbook for Developing Operator Licensing Examinations'' (NUREG-1121). The examinations developed by using the catalog and handbook will cover those topics listed under Title 10, Code of Federal Regulations, Part 55.

Not Available

1985-07-01T23:59:59.000Z

312

X-ray lithography source  

DOE Patents [OSTI]

A high-intensity, inexpensive X-ray source for X-ray lithography for the production of integrated circuits is disclosed. Foil stacks are bombarded with a high-energy electron beam of 25 to 250 MeV to produce a flux of soft X-rays of 500 eV to 3 keV. Methods of increasing the total X-ray power and making the cross section of the X-ray beam uniform are described. Methods of obtaining the desired X-ray-beam field size, optimum frequency spectrum and eliminating the neutron flux are all described. A method of obtaining a plurality of station operation is also described which makes the process more efficient and economical. The satisfying of these issues makes transition radiation an excellent moderate-priced X-ray source for lithography. 26 figures.

Piestrup, M.A.; Boyers, D.G.; Pincus, C.

1991-12-31T23:59:59.000Z

313

X-ray lithography source  

DOE Patents [OSTI]

A high-intensity, inexpensive X-ray source for X-ray lithography for the production of integrated circuits. Foil stacks are bombarded with a high-energy electron beam of 25 to 250 MeV to produce a flux of soft X-rays of 500 eV to 3 keV. Methods of increasing the total X-ray power and making the cross section of the X-ray beam uniform are described. Methods of obtaining the desired X-ray-beam field size, optimum frequency spectrum and elminating the neutron flux are all described. A method of obtaining a plurality of station operation is also described which makes the process more efficient and economical. The satisfying of these issues makes transition radiation an exellent moderate-priced X-ray source for lithography.

Piestrup, Melvin A. (Woodside, CA); Boyers, David G. (Mountain View, CA); Pincus, Cary (Sunnyvale, CA)

1991-01-01T23:59:59.000Z

314

CHINA SPALLATION NEUTRON SOURCE DESIGN.  

SciTech Connect (OSTI)

The China Spallation Neutron Source (CSNS) is an accelerator-based high-power project currently in preparation under the direction of the Chinese Academy of Sciences (CAS). The complex is based on an H- linear accelerator, a rapid cycling proton synchrotron accelerating the beam to 1.6 GeV, a solid tungsten target station, and five initial instruments for spallation neutron applications. The facility will operate at 25 Hz repetition rate with a phase-I beam power of about 120 kW. The major challenge is to build a robust and reliable user's facility with upgrade potential at a fractional of ''world standard'' cost.

WEI,J.

2007-01-29T23:59:59.000Z

315

Spallation Neutron Source reaches megawatt power  

ScienceCinema (OSTI)

The Department of Energy's Spallation Neutron Source (SNS), already the world's most powerful facility for pulsed neutron scattering science, is now the first pulsed spallation neutron source to break the one-megawatt barrier. "Advances in the materials sciences are fundamental to the development of clean and sustainable energy technologies. In reaching this milestone of operating power, the Spallation Neutron Source is providing scientists with an unmatched resource for unlocking the secrets of materials at the molecular level," said Dr. William F. Brinkman, Director of DOE's Office of Science.

Dr. William F. Brinkman

2010-01-08T23:59:59.000Z

316

CONDUCT OF OPERATIONS (CO)  

Broader source: Energy.gov (indexed) [DOE]

CONDUCT OF OPERATIONS (CO) OBJECTIVE TA-55 SST Facility NNSA ORR Implementation Plan 1 1 CO.1 The formality and discipline of operations is adequate to conduct work safely and...

317

Reservoir Operation in Texas  

E-Print Network [OSTI]

management of the surface water resources of the various river basins of the state. The operation of these essential water control facilities is examined in this report. Reservoir operation is viewed here from the perspective of deciding how much water...

Wurbs, Ralph A.

318

Aerosol Sampler Operations Manual  

E-Print Network [OSTI]

-1123 Laboratory FAX (916) 752-4107 Standard Operating Procedures Technical Information Document TI 201A #12;TI 201.................................................................................................................................................. 3 1.0 Weekly Maintenance ProceduresIMPROVE Aerosol Sampler Operations Manual February 10, 1997 Air Quality Group Crocker Nuclear

Fischer, Emily V.

319

Renewable Combined Heat and Power Dairy Operations  

E-Print Network [OSTI]

horsepower Guascor model SFGLD-560 biogas-fired lean burn internal combustion (IC) engine and generator set and modify the existing biogas toelectricity combined heat and power (CHP) system operated at Fiscalini bacteria to remove hydrogen sulfide presented in the biogas. Source: Fiscalini Farms Term: March 2011

320

SWPF Crane Lift Operation  

SciTech Connect (OSTI)

A multiple vview shot of the SWPF crane lift operation at the Savannah River Site. Funded by the Recovery Act.

None

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "operations sources compiled" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Quantum Operations and Measurement  

E-Print Network [OSTI]

the Stinespring dilation form of E . 6 #12; II: operator­sum representation E(#) = Tr env # U(## # env )U

Seevinck, Michiel

322

Electrospray ion source with reduced analyte electrochemistry  

DOE Patents [OSTI]

An electrospray ion (ESI) source and method capable of ionizing an analyte molecule without oxidizing or reducing the analyte of interest. The ESI source can include an emitter having a liquid conduit, a working electrode having a liquid contacting surface, a spray tip, a secondary working electrode, and a charge storage coating covering partially or fully the liquid contacting surface of the working electrode. The liquid conduit, the working electrode and the secondary working electrode can be in liquid communication. The electrospray ion source can also include a counter electrode proximate to, but separated from, said spray tip. The electrospray ion source can also include a power system for applying a voltage difference between the working electrodes and a counter-electrode. The power system can deliver pulsed voltage changes to the working electrodes during operation of said electrospray ion source to minimize the surface potential of the charge storage coating.

Kertesz, Vilmos; Van Berkel, Gary J

2013-07-30T23:59:59.000Z

323

Electrospray ion source with reduced analyte electrochemistry  

DOE Patents [OSTI]

An electrospray ion (ESI) source and method capable of ionizing an analyte molecule without oxidizing or reducing the analyte of interest. The ESI source can include an emitter having a liquid conduit, a working electrode having a liquid contacting surface, a spray tip, a secondary working electrode, and a charge storage coating covering partially or fully the liquid contacting surface of the working electrode. The liquid conduit, the working electrode and the secondary working electrode can be in liquid communication. The electrospray ion source can also include a counter electrode proximate to, but separated from, said spray tip. The electrospray ion source can also include a power system for applying a voltage difference between the working electrodes and a counter-electrode. The power system can deliver pulsed voltage changes to the working electrodes during operation of said electrospray ion source to minimize the surface potential of the charge storage coating.

Kertesz, Vilmos [Knoxville, TN; Van Berkel, Gary [Clinton, TN

2011-08-23T23:59:59.000Z

324

Operations and maintenance philosophy  

SciTech Connect (OSTI)

This Operations and Maintenance (O&M) Philosophy document is intended to establish a future O&M vision, with an increased focus on minimizing worker exposure, ensuring uninterrupted retrieval operations, and minimizing operation life-cycle cost. It is intended that this document would incorporate O&M lessons learned into on-going and future project upgrades.

DUNCAN, G.P.

1999-10-28T23:59:59.000Z

325

MANUFACTURING & SERVICE OPERATIONS MANAGEMENT  

E-Print Network [OSTI]

MANUFACTURING & SERVICE OPERATIONS MANAGEMENT Vol. 14, No. 4, Fall 2012, pp. 495­511 ISSN 1523 research directions, expanding upon the key points raised by Green [Green LV (2012) The vital role of operations analysis in improving healthcare delivery. Manufacturing Service Oper. Management 14

Boucherie, Richard J.

326

DC source assemblies  

DOE Patents [OSTI]

Embodiments of DC source assemblies of power inverter systems of the type suitable for deployment in a vehicle having an electrically grounded chassis are provided. An embodiment of a DC source assembly comprises a housing, a DC source disposed within the housing, a first terminal, and a second terminal. The DC source also comprises a first capacitor having a first electrode electrically coupled to the housing, and a second electrode electrically coupled to the first terminal. The DC source assembly further comprises a second capacitor having a first electrode electrically coupled to the housing, and a second electrode electrically coupled to the second terminal.

Campbell, Jeremy B; Newson, Steve

2013-02-26T23:59:59.000Z

327

Accelerator Sources for THz science: A Review  

SciTech Connect (OSTI)

Free Electron Lasers have been around since 1977 providing not only a test bed for the physics of FELs and electron/photon interactions but as a workhorse of scientific research. More than 30 FELs are presently operating around the world spanning a wavelength range from the millimeter region to the hard x-ray using direct current and rf linear accelerators or storage rings as electron sources. The characteristics that have driven the development of these sources are the desire for high peak and average power, high micropulse energies, wavelength tunability, timing flexibility, and wavelengths that are unavailable from more conventional laser sources. Operation of FELs in the far infrared to terahertz regime poses special challenges which have been and are being addressed at a number of facilities around the world. This paper will review a number of former and existing FELs operating in this regime and discuss future efforts. Broadband collective radiation from relativistic electrons also plays a significant role in the production of FIR/THz radiation and several groups are taking advantage of this source for users. Applications for use of the radiation have evolved from simple imaging to complex pump probe tests of insulator/metal transitions and energy flow in organic molecules. We will discuss the technologies for generating the IR/FIR/THz radiation and cover some of the unique applications of such sources.

Neil, George R. [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States)

2014-01-01T23:59:59.000Z

328

Gulf Coast geopressured-geothermal program summary report compilation. Volume 3: Applied and direct uses, resource feasibility, economics  

SciTech Connect (OSTI)

The US Department of Energy established a geopressured-geothermal energy program in the mid 1970`s as one response to America`s need to develop alternate energy resources in view of the increasing dependence on imported fossil fuel energy. This program continued for 17 years and approximately two hundred million dollars were expended for various types of research and well testing to thoroughly investigate this alternative energy source. This volume describes the following studies: Geopressured-geothermal hybrid cycle power plant: design, testing, and operation summary; Feasibility of hydraulic energy recovery from geopressured-geothermal resources: economic analysis of the Pelton turbine; Brine production as an exploration tool for water drive gas reservoirs; Study of supercritical Rankine cycles; Application of the geopressured-geothermal resource to pyrolytic conversion or decomposition/detoxification processes; Conclusions on wet air oxidation, pyrolytic conversion, decomposition/detoxification process; Co-location of medium to heavy oil reservoirs with geopressured-geothermal resources and the feasibility of oil recovery using geopressured-geothermal fluids; Economic analysis; Application of geopressured-geothermal resources to direct uses; Industrial consortium for the utilization of the geopressured-geothermal resource; Power generation; Industrial desalination, gas use and sales, pollutant removal, thermal EOR, sulfur frasching, oil and natural gas pipelining, coal desulfurization and preparation, lumber and concrete products kilning; Agriculture and aquaculture applications; Paper and cane sugar industries; Chemical processing; Environmental considerations for geopressured-geothermal development. 27 figs., 25 tabs.

John, C.J.; Maciasz, G.; Harder, B.J.

1998-06-01T23:59:59.000Z

329

An Efficient RF Source for Jlab  

SciTech Connect (OSTI)

We propose the development of a highly reliable high efficiency RF source for JLAB with a lower lifetime cost operating at 80% efficiency with system operating costs of about 0.7M$/year for the 6 GeV machine. The design of the RF source will be based upon two injection locked magnetrons in a novel combining architecture for amplitude modulation and a cross field amplifier (CFA) as an output tube for the 12 GeV upgrade. A cost analysis including efficiency and reliability will be performed to determine the optimum system architecture. Several different system architectures will be designed and evaluated for a dual injection locked magnetron source using novel combining techniques and possibly a CFA as the output tube. A paper design for the 1497 MHz magnetron system will be completed. The optimum system architecture with all relevant specifications will be completed so that a prototype can be built.

Neubauer, M. [Muons, Inc.; Dudas, A. [Muons, Inc.; Rimmer, Robert A. [JLAB; Wang, Haipeng [JLAB

2013-12-01T23:59:59.000Z

330

ASTRO-F/FIS Observing Simulation: Detection Limits for Point Sources  

E-Print Network [OSTI]

We describe the observing simulation software FISVI (FIS Virtual Instrument), which was developed for the Far-Infrared Surveyor (FIS) that will be on the Japanese infrared astronomy mission ASTRO-F. The FISVI has two purposes: one is to check the specifications and performances of the ASTRO-F/FIS as a whole; the other is to prepare input data sets for the data analysis softwares prior to launch. In the FISVI, special care was taken by introducing the "Compiled PSF (Point Spread Function)" to optimise inevitable, but time-consuming, convolution processes. With the Compiled PSF, we reduce the computation time by an order of magnitude. The photon and readout noises are included in the simulations. We estimate the detection limits for point sources from the simulation of virtual patches of the sky mostly consisting of distant galaxies. We studied the importance of source confusion for simple power-law models for N(>S), the number of sources brighter than S. We found that source confusion plays a dominant role in the detection limits only for models with rapid luminosity evolution for the galaxy counts, the evolution of which is suggested by recent observations.

Woong-Seob Jeong; Soojong Pak; Hyung Mok Lee; Takao Nakagawa; Jungjoo Sohn; Insun Ahn; Issei Yamamura; Masaru Watanabe; Mitsunobu Kawada; Hiroshi Shibai

2003-04-17T23:59:59.000Z

331

Hanford Site air operating permit application  

SciTech Connect (OSTI)

The Clean Air Act Amendments of 1990, which amended the Federal Clean Air Act of 1977, required that the US Environmental Protection Agency develop a national Air Operating Permit Program, which in turn would require each state to develop an Air Operating Permit Program to identify all sources of ``regulated`` pollutants. Regulated pollutants include ``criteria`` pollutants (oxides of nitrogen, sulfur oxides, total suspended particulates, carbon monoxide, particulate matter greater than 10 micron, lead) plus 189 other ``Hazardous`` Air Pollutants. The Hanford Site, owned by the US Government and operated by the US Department of Energy, Richland Operations Office, is located in southcentral Washington State and covers 560 square miles of semi-arid shrub and grasslands located just north of the confluence of the Snake and Yakima Rivers with the Columbia River. This land, with restricted public access, provides a buffer for the smaller areas historically used for the production of nuclear materials, waste storage, and waste disposal. About 6 percent of the land area has been disturbed and is actively used. The Hanford Site Air Operating Permit Application consists of more than 1,100 sources and in excess of 300 emission points. Before January 1995, the maintenance and operations contractor and the environmental restoration contractor for the US Department of Energy completed an air emission inventory on the Hanford Site. The inventory has been entered into a database so that the sources and emission points can be tracked and updated information readily can be retrieved. The Hanford Site Air Operating Permit Application contains information current as of April 19, 1995.

NONE

1995-05-01T23:59:59.000Z

332

Ammonia and ammonium hydroxide sensors for ammonia/water absorption machines: Literature review and data compilation  

SciTech Connect (OSTI)

This report describes an evaluation of various sensing techniques for determining the ammonia concentration in the working fluid of ammonia/water absorption cycle systems. The purpose of this work was to determine if any existing sensor technology or instrumentation could provide an accurate, reliable, and cost-effective continuous measure of ammonia concentration in water. The resulting information will be used for design optimization and cycle control in an ammonia-absorption heat pump. PNL researchers evaluated each sensing technology against a set of general requirements characterizing the potential operating conditions within the absorption cycle. The criteria included the physical constraints for in situ operation, sensor characteristics, and sensor application. PNL performed an extensive literature search, which uncovered several promising sensing technologies that might be applicable to this problem. Sixty-two references were investigated, and 33 commercial vendors were identified as having ammonia sensors. The technologies for ammonia sensing are acoustic wave, refractive index, electrode, thermal, ion-selective field-effect transistor (ISFET), electrical conductivity, pH/colormetric, and optical absorption. Based on information acquired in the literature search, PNL recommends that follow-on activities focus on ISFET devices and a fiber optic evanescent sensor with a colormetric indicator. The ISFET and fiber optic evanescent sensor are inherently microminiature and capable of in situ measurements. Further, both techniques have been demonstrated selective to the ammonium ion (NH{sub 4}{sup +}). The primary issue remaining is how to make the sensors sufficiently corrosion-resistant to be useful in practice.

Anheier, N.C. Jr.; McDonald, C.E.; Cuta, J.M.; Cuta, F.M.; Olsen, K.B.

1995-05-01T23:59:59.000Z

333

Cask fleet operations study  

SciTech Connect (OSTI)

The Nuclear Waste Policy Act of 1982 assigned to the Department of Energy's (DOE) Office of Civilian Waste Management the responsibility for disposing of high-level waste and spent fuel. A significant part of that responsibility involves transporting nuclear waste materials within the federal waste management system; that is, from the waste generator to the repository. The lead responsibility for transportation operations has been assigned to Oak Ridge Operations, with Oak Ridge National Laboratory (ORNL) providing technical support through the Transportation Operations Support Task Group. One of the ORNL support activities involves assessing what facilities, equipment and services are required to assure that an acceptable, cost-effective and safe transportation operations system can be designed, operated and maintained. This study reviews, surveys and assesses the experience of Nuclear Assurance Corporation (NAC) in operating a fleet of spent-fuel shipping casks to aid in developing the spent-fuel transportation system.

Not Available

1988-01-01T23:59:59.000Z

334

Radioisotope Power Sources for MEMS Devices,  

SciTech Connect (OSTI)

Microelectromechanical systems (MEMS) comprise a rapidly expanding research field with potential applications varying from sensors in airbags to more recent optical applications. Depending on the application, these devices often require an on-board power source for remote operation, especially in cases requiring operation for an extended period of time. Previously suggested power sources include fossil fuels and solar energy, but nuclear power sources may provide significant advantages for certain applications. Hence, the objective of this study is to establish the viability of using radioisotopes to power realistic MEMS devices. A junction-type battery was constructed using silicon and a {sup 63}Ni liquid source. A source volume containing 64 {micro}Ci provided a power of {approx}0.07 nW. A more novel application of nuclear sources for MEMS applications involves the creation of a resonator that is driven by charge collection in a cantilever beam. Preliminary results have established the feasibility of this concept, and future work will optimize the design for various applications.

Blanchard, J.P.

2001-06-17T23:59:59.000Z

335

Management of disused plutonium sealed sources  

SciTech Connect (OSTI)

The Global Threat Reduction Initiative's (GTRI) Offsite Source Recovery Project (OSRP) has been recovering excess and unwanted radioactive sealed sources since 1999, including more than 2,400 Plutonium (Pu)-238 sealed sources and 653 Pu-239-bearing sources that represent more than 10% of the total sources recovered by GTRI/OSRP to date. These sources have been recovered from hundreds of sites within the United States (US) and around the world. OSRP grew out of early efforts at the Los Alamos National Laboratory (LANL) to recover and disposition excess Plutonium-239 (Pu-239) sealed sources that were distributed in the 1960s and 1970s under the Atoms for Peace Program, a loan-lease program that serviced 31 countries, as well as domestic users. In the conduct of these recovery operations, GTRI/OSRP has been required to solve problems related to knowledge-of-inventory, packaging and transportation of fissile and heat-source materials, transfer of ownership, storage of special nuclear material (SNM) both at US Department of Energy (DOE) facilities and commercially, and disposal. Unique issues associated with repatriation from foreign countries, including end user agreements required by some European countries and denials of shipment, will also be discussed.

Whitworth, Julia Rose [Los Alamos National Laboratory; Pearson, Michael W [Los Alamos National Laboratory; Abeyta, Cristy [Los Alamos National Laboratory

2010-01-01T23:59:59.000Z

336

SHIELDING ANALYSIS FOR PORTABLE GAUGING COMBINATION SOURCES  

SciTech Connect (OSTI)

Radioisotopic decay has been used as a source of photons and neutrons for industrial gauging operations since the late 1950s. Early portable moisture/density gauging equipment used Americium (Am)-241/Beryllium (Be)/Cesium (Cs)-137 combination sources to supply the required nuclear energy for gauging. Combination sources typically contained 0.040 Ci of Am-241 and 0.010 Ci of CS-137 in the same source capsule. Most of these sources were manufactured approximately 30 years ago. Collection, transportation, and storage of these sources once removed from their original device represent a shielding problem with distinct gamma and neutron components. The Off-Site Source Recovery (OSR) Project is planning to use a multi-function drum (MFD) for the collection, shipping, and storage of AmBe sources, as well as the eventual waste package for disposal. The MFD is an approved TRU waste container design for DOE TRU waste known as the 12 inch Pipe Component Overpack. As the name indicates, this drum is based on a 12 inch ID stainless steel weldment approximately 25 inch in internal length. The existing drum design allows for addition of shielding within the pipe component up to the 110 kg maximum pay load weight. The 12 inch pipe component is packaged inside a 55-gallon drum, with the balance of the interior space filled with fiberboard dunnage. This packaging geometry is similar to the design of a DOT 6M, Type B shipping container.

J. TOMPKINS; L. LEONARD; ET AL

2000-08-01T23:59:59.000Z

337

EMSL 2008 Operational Review  

SciTech Connect (OSTI)

The William R. Wiley Environmental Molecular Sciences Laboratory (EMSL) is a national user facility that contains state-of-the-art instrumentation and expert resources available for use by researchers from academia, industry, and the national laboratory system. The facility is supported by the U.S. Department of Energys (DOE) Biological and Environmental Research Program, but the research conducted within the facility benefits many funding agencies, including other branches of DOE, the National Institutes of Health, the National Science Foundation, and the Department of Defense. EMSL requires the continued funding and support of its stakeholders and clients to continue to grow its mission, build its reputation as a sought-after national user facility with cutting-edge capabilities, and attract high-profile users who will work to solve the most critical scientific challenges that affect DOE and the nation. In this vein, this document has been compiled to provide these stakeholders and clients with a review document that provides an abundance of information on EMSLs history, current research activities, and proposed future direction.

Campbell, Allison A.

2008-08-12T23:59:59.000Z

338

Mapping complexity sources in nuclear power plant domains  

E-Print Network [OSTI]

Understanding the sources of complexity in advanced Nuclear Power Plant (NPP) control rooms and their effects on human reliability is critical for ensuring safe performance of both operators and the entire system. New ...

Sasangohar, Farzan

339

Pipeline Operations Program (Louisiana)  

Broader source: Energy.gov [DOE]

The Pipeline Operations Program regulates the construction, acquisition, abandonment and interconnection of natural gas pipelines, as well as, the transportation and use of natural gas supplies.

340

Hyponormality of Toeplitz Operators  

E-Print Network [OSTI]

Amer. Math. Soc. 82(1976), 494-496. [12] S. C. Power. Hankel Operators on Hilbert Space, Pitman, Boston, 1982. [13] D. Sarason. Generalized interpolation in H.

1910-40-52T23:59:59.000Z

Note: This page contains sample records for the topic "operations sources compiled" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Semicausal operations are semilocalizable  

E-Print Network [OSTI]

We prove a conjecture by DiVincenzo, which in the terminology of Preskill et al. [quant-ph/0102043] states that ``semicausal operations are semilocalizable''. That is, we show that any operation on the combined system of Alice and Bob, which does not allow Bob to send messages to Alice, can be represented as an operation by Alice, transmitting a quantum particle to Bob, and a local operation by Bob. The proof is based on the uniqueness of the Stinespring representation for a completely positive map. We sketch some of the problems in transferring these concepts to the context of relativistic quantum field theory.

Eggeling, T; Werner, R F

2002-01-01T23:59:59.000Z

342

Large source test stand for H/sup -/(D/sup -/) ion source  

SciTech Connect (OSTI)

The Brookhaven National Laboratory Neutral Beam Group has constructed a large source test stand for testing of the various source modules under development. The first objective of the BNL program is to develop a source module capable of delivering 10A of H/sup -/(D/sup -/) at 25 kV operating in the steady state mode with satisfactory gas and power efficiency. The large source test stand contains gas supply and vacuum pumping systems, source cooling systems, magnet power supplies and magnet cooling systems, two arc power supplies rated at 25 kW and 50 kW, a large battery driven power supply and an extractor electrode power supply. Figure 1 is a front view of the vacuum vessel showing the control racks with the 36'' vacuum valves and refrigerated baffles mounted behind. Figure 2 shows the rear view of the vessel with a BNL Mk V magnetron source mounted in the source aperture and also shows the cooled magnet coils. Currently two types of sources are under test: a large magnetron source and a hollow cathode discharge source.

Larson, R.; McKenzie-Wilson, R.

1981-01-01T23:59:59.000Z

343

Dynamic radioactive particle source  

DOE Patents [OSTI]

A method and apparatus for providing a timed, synchronized dynamic alpha or beta particle source for testing the response of continuous air monitors (CAMs) for airborne alpha or beta emitters is provided. The method includes providing a radioactive source; placing the radioactive source inside the detection volume of a CAM; and introducing an alpha or beta-emitting isotope while the CAM is in a normal functioning mode.

Moore, Murray E.; Gauss, Adam Benjamin; Justus, Alan Lawrence

2012-06-26T23:59:59.000Z

344

Tank waste source term inventory validation. Volume 1. Letter report  

SciTech Connect (OSTI)

The sample data for selection of 11 radionuclides and 24 chemical analytes were extracted from six separate sample data sets, were arranged in a tabular format and were plotted on scatter plots for all of the 149 single-shell tanks, the 24 double-shell tanks and the four aging waste tanks. The solid and liquid sample data was placed in separate tables and plots. The sample data and plots were compiled from the following data sets: characterization raw sample data, recent core samples, D. Braun data base, Wastren (Van Vleet) data base, TRAC and HTCE inventories. This document is Volume I of the Letter Report entitled Tank Waste Source Term Inventory Validation.

Brevick, C.H.; Gaddis, L.A.; Johnson, E.D.

1995-04-28T23:59:59.000Z

345

Develop an effective Title V operating permit  

SciTech Connect (OSTI)

Under Title V of the 1990 Clean Air Act Amendments (CAAA), thousands of industrial and government facilities are required to apply for a comprehensive operating permit that addresses all the emission sources at a site and the CAA regulations that apply to them. The new permitting requirements apply to major sources only--although there are several definitions of a major source under the Amended Act. Because Title V applicability is based on potential to emit (PTE) rather than actual emissions, even small and medium sources may initially be subject to this program. Unlike other regulations, Title V puts the burden of demonstrating continuous compliance on source owners and operators. Careful attention to detail is necessary during the application process because the Title V permit is inherently an enforcement fool for the EPA and the general public. Noncompliance can lead to citizen suits and fines up to $25,000 per day. Therefore, it is critical to negotiate an operating permit that does not adversely impact current operations yet provides flexibility for future modifications. Each state and local agency has its own application forms and regulatory interpretations. Areas of complexity include the classification of emission units, the approach for the PTE calculation, the separation of federal and state-enforceable requirements, and the relationship between Title V and other CAAA titles. This article summarizes some lessons learned based upon experiences in various states. (It does not attempt to resolve program uncertainties among jurisdictions.) The practical strategies presented can be used for developing (or modifying) Title V applications as well as during permit negotiations.

Chadha, N.

1997-01-01T23:59:59.000Z

346

SOURCE SELECTION INFORMATION -  

Office of Environmental Management (EM)

on Energy and Water Development U.S. House of Representatives The Honorable Lamar Alexander Ranking Member SOURCE SELECTION INFORMATION - SEE FEDERAL ACQUISITION...

347

SOURCE SELECTION INFORMATION -  

Energy Savers [EERE]

on Energy and Water Development U.S. House of Representatives The Honorable Lamar Alexander SOURCE SELECTION INFORMATION - SEE FEDERAL ACQUISITION REGULATION (FAR)...

348

Dense Plasma Focus Fusion Neutron Sources Progress at NSTec, September 2011  

SciTech Connect (OSTI)

A number of dense plasma focus (DPF) sources are introduced, including their operating characteristics and current activities. Neutron resonance spectroscopy is discussed and the feasibility of using DPF for neutron sources is considered.

Hagen, E. C.

2011-07-02T23:59:59.000Z

349

EA-0389: Proposed 7-GeV Advanced Photon Source, Argonne, Illinois  

Broader source: Energy.gov [DOE]

This EA evaluates the environmental impacts of a proposal for construction and operation of a 6- to 7-GeV synchrotron radiation source known as the 7-GeV Advanced Photon Source atDOE's Argonne...

350

Sample inlet tube for ion source  

DOE Patents [OSTI]

An improved inlet tube is positioned within an aperture through the device to allow the passage of ions from the ion source, through the improved inlet tube, and into the interior of the device. The inlet tube is designed with a larger end and a smaller end wherein the larger end has a larger interior diameter than the interior diameter of the smaller end. The inlet tube is positioned within the aperture such that the larger end is pointed towards the ion source, to receive ions therefrom, and the smaller end is directed towards the interior of the device, to deliver the ions thereto. Preferably, the ion source utilized in the operation of the present invention is a standard electrospray ionization source. Similarly, the present invention finds particular utility in conjunction with analytical devices such as mass spectrometers.

Prior, David [Hermiston, OR; Price, John [Richland, WA; Bruce, Jim [Oceanside, CA

2002-09-24T23:59:59.000Z

351

Operating System Resource Management  

E-Print Network [OSTI]

Operating System Resource Management Date: Monday, September 27, 2010 Time: 2:00 ­ 3:00 pm Location constrained. This talk will propose a scheme for addressing the operating system resource management problem Sciences Seminar Series presents Pacific Northwest National Laboratory Resource management is the dynamic

352

Ordered involutive operator spaces  

E-Print Network [OSTI]

This is a companion to recent papers of the authors; here we construct the `noncommutative Shilov boundary' of a (possibly nonunital) selfadjoint ordered space of Hilbert space operators. The morphisms in the universal property of the boundary preserve order. As an application, we consider `maximal' and `minimal' unitizations of such ordered operator spaces.

Blecher, David P; Neal, Matthew; Werner, Wend

2007-01-01T23:59:59.000Z

353

Operations Research + Information Engineering  

E-Print Network [OSTI]

and the equipment they operate to perform most efficiently. The allocation of resources may be represented of the techniques and modeling concepts needed to analyze and design complex systems. As an operations researcher. All business systems are complex and need sophisticated decision-making methods that enable employees

Keinan, Alon

354

MANUFACTURING & SERVICE OPERATIONS MANAGEMENT  

E-Print Network [OSTI]

;Green and Soares: Note Manufacturing & Service Operations Management 9(1), pp. 54­61, © 2007 INFORMS 55MANUFACTURING & SERVICE OPERATIONS MANAGEMENT Vol. 9, No. 1, Winter 2007, pp. 54­61 issn 1523-Dependent Waiting Time Probabilities in M t /M/s t Queuing Systems Linda V. Green Graduate School of Business

Soares, João Luís Cardoso

355

OPERATIONS MANAGEMENT Spring 2008  

E-Print Network [OSTI]

1 MGSC 395 OPERATIONS MANAGEMENT Spring 2008 Course Syllabus Instructor: Professor Anand Nair Class MATERIALS Required Text Books Textbook: Krajewski, Lee, Ritzman, Larry, and Malhotra, Manoj. Operations Management: Processes and Value Chains, 8 th edition, Prentice Hall, 2007. (ISBN: 0-13-187294-X). Novel

Almor, Amit

356

Compilation and summary of technical and economic assessments in the field of energy storage  

SciTech Connect (OSTI)

Information is presented which was extracted from various assessments of energy storage technologies conducted during the past four years, primarily under the auspices of the Office of Energy Systems Research and Development (formerly the Division of Energy Storage Systems). A thorough search of the relevant literature was conducted using the DOE/RECON computerized data base and other sources. Only tabular or graphic material was abstracted from the documents. The material has been organized in two ways: by the intended end use, i.e., vehicles, utility load leveling, residential load leveling, industrial, and solar, and within each end use, by technology. The summary tables attempt to compare the results of different studies of the same technology or end use. No attempt is made to summarize the conclusions of each individual study, but rather to point out areas of agreement or disagreement between them. The reader should be aware of the risks in making comparisons between studies conducted by researchers with possibly differing purposes and assumptions. Any conclusions based on the summary sections are more indicative than definitive.

DeVries, J.

1981-10-01T23:59:59.000Z

357

E-Print Network 3.0 - accelerator-driven neutron source Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: - so called Accelerator-Driven System (ADS). An external neutron source and subcritical operation open... about 3 times a year. An alternative, thermal neutron...

358

Materials for cold neutron sources: Cryogenic and irradiation effects  

SciTech Connect (OSTI)

Materials for the construction of cold neutron sources must satisfy a range of demands. The cryogenic temperature and irradiation create a severe environment. Candidate materials are identified and existing cold sources are briefly surveyed to determine which materials may be used. Aluminum- and magnesium-based alloys are the preferred materials. Existing data for the effects of cryogenic temperature and near-ambient irradiation on the mechanical properties of these alloys are briefly reviewed, and the very limited information on the effects of cryogenic irradiation are outlined. Generating mechanical property data under cold source operating conditions is a daunting prospect. It is clear that the cold source material will be degraded by neutron irradiation, and so the cold source must be designed as a brittle vessel. The continued effective operation of many different cold sources at a number of reactors makes it clear that this can be accomplished. 46 refs., 8 figs., 2 tab.

Alexander, D.J.

1990-01-01T23:59:59.000Z

359

ALTERNATE POWER AND ENERGY STORAGE/REUSE FOR DRILLING RIGS: REDUCED COST AND LOWER EMISSIONS PROVIDE LOWER FOOTPRINT FOR DRILLING OPERATIONS  

E-Print Network [OSTI]

on alternate drilling energy sources which can make entire drilling process economic and environmentally friendly. One of the major ways to reduce the footprint of drilling operations is to provide more efficient power sources for drilling operations...

Verma, Ankit

2010-07-14T23:59:59.000Z

360

Ion source with improved primary arc collimation  

DOE Patents [OSTI]

An improved negative ion source is provided in which a self-biasing, molybdenum collimator is used to define the primary electron stream arc discharge from a filament operated at a negative potential. The collimator is located between the anode and the filament. It is electrically connected to the anode by means of an appropriate size resistor such that the collimator is biased at essentially the filament voltage during operation. Initially, the full arc voltage appears across the filament to collimator until the arc discharge strikes. Then the collimator biases itself to essentially filament potential due to current flow through the resistor thus defining the primary electron stream without intercepting any appreciable arc power. The collimator aperture is slightly smaller than the anode aperture to shield the anode from the arc power which, in the past, has caused overheating and erosion of the anode collimator during extended time pulsed-beam operation of the source. With the self-biasing collimator of this invention, the ion source may be operated from short pulse periods to steady-state without destroying the anode.

Dagenhart, W.K.

1983-12-16T23:59:59.000Z

Note: This page contains sample records for the topic "operations sources compiled" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Ion source with improved primary arc collimation  

DOE Patents [OSTI]

An improved negative ion source is provided in which a self-biasing, molybdenum collimator is used to define the primary electron stream arc discharge from a filament operated at a negative potential. The collimator is located between the anode and the filament. It is electrically connected to the anode by means of an appropriate size resistor such that the collimator is biased at essentially the filament voltage during operation. Initially, the full arc voltage appears across the filament to collimator until the arc discharge strikes. Then the collimator biases itself to essentially filament potential due to current flow through the resistor thus defining the primary electron stream without intercepting any appreciable arc power. The collimator aperture is slightly smaller than the anode aperture to shield the anode from the arc power, thereby preventing the exposure of the anode to the full arc power which, in the past, has caused overheating and erosion of the anode collimator during extended time pulsed-beam operation of the source. With the self-biasing collimator of this invention, the ion source may be operated from short pulse periods to steady-state without destroying the anode.

Dagenhart, William K. (Oak Ridge, TN)

1985-01-01T23:59:59.000Z

362

Radiation Source Replacement Workshop  

SciTech Connect (OSTI)

This report summarizes a Radiation Source Replacement Workshop in Houston Texas on October 27-28, 2010, which provided a forum for industry and researchers to exchange information and to discuss the issues relating to replacement of AmBe, and potentially other isotope sources used in well logging.

Griffin, Jeffrey W.; Moran, Traci L.; Bond, Leonard J.

2010-12-01T23:59:59.000Z

363

Lithium ion sources  

E-Print Network [OSTI]

HIFAN 1866 Lithium ion sources by Prabir K. Roy, Wayne G.No. DE-AC02-05CH11231. Lithium ion sources Prabir K. RoyUSA Abstract A 10.9 cm diameter lithium alumino-silicate ion

Roy, Prabir K.

2014-01-01T23:59:59.000Z

364

National Synchrotron Light Source annual report 1991  

SciTech Connect (OSTI)

This report discusses the following research conducted at NSLS: atomic and molecular science; energy dispersive diffraction; lithography, microscopy and tomography; nuclear physics; UV photoemission and surface science; x-ray absorption spectroscopy; x-ray scattering and crystallography; x-ray topography; workshop on surface structure; workshop on electronic and chemical phenomena at surfaces; workshop on imaging; UV FEL machine reviews; VUV machine operations; VUV beamline operations; VUV storage ring parameters; x-ray machine operations; x-ray beamline operations; x-ray storage ring parameters; superconducting x-ray lithography source; SXLS storage ring parameters; the accelerator test facility; proposed UV-FEL user facility at the NSLS; global orbit feedback systems; and NSLS computer system.

Hulbert, S.L.; Lazarz, N.M. (eds.)

1992-04-01T23:59:59.000Z

365

Compilation of information on modeling of inductively heated cold crucible melters  

SciTech Connect (OSTI)

The objective of this communication, Phase B of a two-part report, is to present information on modeling capabilities for inductively heated cold crucible melters, a concept applicable to waste immobilization. Inductively heated melters are those in which heat is generated using coils around, rather than electrodes within, the material to be heated. Cold crucible or skull melters are those in which the melted material is confined within unmelted material of the same composition. This phase of the report complements and supplements Phase A by Loren Eyler, specifically by giving additional information on modeling capabilities for the inductively heated melter concept. Eyler discussed electrically heated melter modeling capabilities, emphasizing heating by electrodes within the melt or on crucible walls. Eyler also discussed requirements and resources for the computational fluid dynamics, heat flow, radiation effects, and boundary conditions in melter modeling; the reader is referred to Eyler`s discussion of these. This report is intended for use in the High Level Waste (HLW) melter program at Hanford. We sought any modeling capabilities useful to the HLW program, whether through contracted research, code license for operation by Department of Energy laboratories, or existing codes and modeling expertise within DOE.

Lessor, D.L.

1996-03-01T23:59:59.000Z

366

Operating Experience Summaries | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L d F SSales LLCDiesel Engines |Open Source SoftwareOperatingOperating

367

Neutron sources and applications  

SciTech Connect (OSTI)

Review of Neutron Sources and Applications was held at Oak Brook, Illinois, during September 8--10, 1992. This review involved some 70 national and international experts in different areas of neutron research, sources, and applications. Separate working groups were asked to (1) review the current status of advanced research reactors and spallation sources; and (2) provide an update on scientific, technological, and medical applications, including neutron scattering research in a number of disciplines, isotope production, materials irradiation, and other important uses of neutron sources such as materials analysis and fundamental neutron physics. This report summarizes the findings and conclusions of the different working groups involved in the review, and contains some of the best current expertise on neutron sources and applications.

Price, D.L. [ed.] [Argonne National Lab., IL (United States); Rush, J.J. [ed.] [National Inst. of Standards and Technology, Gaithersburg, MD (United States)

1994-01-01T23:59:59.000Z

368

Photonic crystal light source  

DOE Patents [OSTI]

A light source is provided by a photonic crystal having an enhanced photonic density-of-states over a band of frequencies and wherein at least one of the dielectric materials of the photonic crystal has a complex dielectric constant, thereby producing enhanced light emission at the band of frequencies when the photonic crystal is heated. The dielectric material can be a metal, such as tungsten. The spectral properties of the light source can be easily tuned by modification of the photonic crystal structure and materials. The photonic crystal light source can be heated electrically or other heating means. The light source can further include additional photonic crystals that exhibit enhanced light emission at a different band of frequencies to provide for color mixing. The photonic crystal light source may have applications in optical telecommunications, information displays, energy conversion, sensors, and other optical applications.

Fleming, James G. (Albuquerque, NM); Lin, Shawn-Yu (Albuquerque, NM); Bur, James A. (Corrales, NM)

2004-07-27T23:59:59.000Z

369

Pulsed ion beam source  

DOE Patents [OSTI]

An improved pulsed ion beam source having a new biasing circuit for the fast magnetic field. This circuit provides for an initial negative bias for the field created by the fast coils in the ion beam source which pre-ionize the gas in the source, ionize the gas and deliver the gas to the proper position in the accelerating gap between the anode and cathode assemblies in the ion beam source. The initial negative bias improves the interaction between the location of the nulls in the composite magnetic field in the ion beam source and the position of the gas for pre-ionization and ionization into the plasma as well as final positioning of the plasma in the accelerating gap. Improvements to the construction of the flux excluders in the anode assembly are also accomplished by fabricating them as layered structures with a high melting point, low conductivity material on the outsides with a high conductivity material in the center.

Greenly, John B. (Lansing, NY)

1997-01-01T23:59:59.000Z

370

Stack Monitor Operating Experience Review  

SciTech Connect (OSTI)

Stack monitors are used to sense radioactive particulates and gases in effluent air being vented from rooms of nuclear facilities. These monitors record the levels and types of effluents to the environment. This paper presents the results of a stack monitor operating experience review of the U.S. Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS) database records from the past 18 years. Regulations regarding these monitors are briefly described. Operating experiences reported by the U.S. DOE and in engineering literature sources were reviewed to determine the strengths and weaknesses of these monitors. Electrical faults, radiation instrumentation faults, and human errors are the three leading causes of failures. A representative all modes failure rate is 1E-04/hr. Repair time estimates vary from an average repair time of 17.5 hours (with spare parts on hand) to 160 hours (without spare parts on hand). These data should support the use of stack monitors in any nuclear facility, including the National Ignition Facility and the international ITER project.

L. C. Cadwallader; S. A. Bruyere

2009-05-01T23:59:59.000Z

371

Journal of Ecology 2008, 96, 12381251 doi: 10.1111/j.1365-2745.2008.01424.x 2008 The Authors. Journal compilation 2008 British Ecological Society  

E-Print Network [OSTI]

Journal of Ecology 2008, 96, 1238­1251 doi: 10.1111/j.1365-2745.2008.01424.x © 2008 The Authors. Journal compilation © 2008 British Ecological Society Blackwell Publishing Ltd Topographic controls of vascular plants closely linked to primary production and surface energy balance. LAI can vary by an order

372

Functional Ecology 2008, 22, 706713 doi: 10.1111/j.1365-2435.2008.01395.x 2008 The Authors. Journal compilation 2008 British Ecological Society  

E-Print Network [OSTI]

. Journal compilation 2008 British Ecological Society Blackwell Publishing Ltd Endophyte symbiosis investigated how a fungal endophyte symbiosis affects the growth and survival of a rare, mid-western United compared the performance of endophyte-infected and endophyte- disinfected grove bluegrass (Poa alsodes

Rudgers, Jennifer

373

Functional Ecology 2009 doi: 10.1111/j.1365-2435.2008.01538.x 2009 The Authors. Journal compilation 2009 British Ecological Society  

E-Print Network [OSTI]

Functional Ecology 2009 doi: 10.1111/j.1365-2435.2008.01538.x © 2009 The Authors. Journal compilation © 2009 British Ecological Society Blackwell Publishing Ltd Integrating biophysical models management decisions. Key-words: climate change, human health, mechanistic model, biophysical ecology

Sheridan, Jennifer

374

Functional Ecology 2009, 23, 321329 doi: 10.1111/j.1365-2435.2008.01498.x 2008 The Authors. Journal compilation 2008 British Ecological Society  

E-Print Network [OSTI]

Functional Ecology 2009, 23, 321329 doi: 10.1111/j.1365-2435.2008.01498.x 2008 The Authors. Journal compilation 2008 British Ecological Society Blackwell Publishing Ltd Seasonal, sexual, and quality related variation in retinal carotenoid accumulation in the house finch (Carpodacus mexicanus

McGraw, Kevin J.

375

Steps for Switching to Digest Version of Daily Campus-wide Emails The "digest" version compiles all individual campus-wide emails sent through the Computing  

E-Print Network [OSTI]

Steps for Switching to Digest Version of Daily Campus-wide Emails The "digest" version compiles all) Under "Set Digest Mode," switch to "On." 8) Click the "Submit My Changes" button You're done! You should 24 hour period. To switch to the digest version for all campus-wide emails sent to students, faculty

Selmic, Sandra

376

Proceedings of the 13th International Conference on Parallel Architecture and Compilation Techniques (PACT'04) 1089-795X/04 $ 20.00 IEEE  

E-Print Network [OSTI]

Proceedings of the 13th International Conference on Parallel Architecture and Compilation Techniques (PACT'04) 1089-795X/04 $ 20.00 IEEE #12;Proceedings of the 13th International Conference/04 $ 20.00 IEEE #12;Proceedings of the 13th International Conference on Parallel Architecture

Cintra, Marcelo

377

Conventional power sources for colliders  

SciTech Connect (OSTI)

At SLAC we are developing high peak-power klystrons to explore the limits of use of conventional power sources in future linear colliders. In an experimental tube we have achieved 150 MW at 1 ..mu..sec pulse width at 2856 MHz. In production tubes for SLAC Linear Collider (SLC) we routinely achieve 67 MW at 3.5 ..mu..sec pulse width and 180 pps. Over 200 of the klystrons are in routine operation in SLC. An experimental klystron at 8.568 GHz is presently under construction with a design objective of 30 MW at 1 ..mu..sec. A program is starting on the relativistic klystron whose performance will be analyzed in the exploration of the limits of klystrons at very short pulse widths.

Allen, M.A.

1987-07-01T23:59:59.000Z

378

Solenoid and monocusp ion source  

DOE Patents [OSTI]

An ion source which generates hydrogen ions having high atomic purity incorporates a solenoidal permanent magnets to increase the electron path length. In a sealed envelope, electrons emitted from a cathode traverse the magnetic field lines of a solenoid and a monocusp magnet between the cathode and a reflector at the monocusp. As electrons collide with gas, the molecular gas forms a plasma. An anode grazes the outer boundary of the plasma. Molecular ions and high energy electrons remain substantially on the cathode side of the cusp, but as the ions and electrons are scattered to the aperture side of the cusp, additional collisions create atomic ions. The increased electron path length allows for smaller diameters and lower operating pressures. 6 figs.

Brainard, J.P.; Burns, E.J.T.; Draper, C.H.

1997-10-07T23:59:59.000Z

379

Richland Operations Office  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Department of Energy Richland Operations Office P.O. Box 550 &?ATES0Richland, Washington 99352 10O-AMSE-0054 A PR I Mr. J. G. Lehew III, President and Chief Executive Officer...

380

Conduct of Operations  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Order defines the requirements for establishing and implementing Conduct of Operations Programs at Department of Energy (DOE), including National Nuclear Security Administration (NNSA), facilities and projects. Cancels DOE O 5480.19. Admin Chg 1, 6-25-13

2010-06-29T23:59:59.000Z

Note: This page contains sample records for the topic "operations sources compiled" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Richland Operations Office  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

the internal dosimetry program. " S-li -SED-CHPRC-PFP-002-F1 1: Less than adequate conduct of operations was observed. Failures to follow procedures contributed to...

382

Operating plan FY 1998  

SciTech Connect (OSTI)

This document is the first edition of Argonne`s new Operating Plan. The Operating Plan complements the strategic planning in the Laboratory`s Institutional Plan by focusing on activities that are being pursued in the immediate fiscal year, FY 1998. It reflects planning that has been done to date, and it will serve in the future as a resource and a benchmark for understanding the Laboratory`s performance. The heart of the Institutional Plan is the set of major research initiatives that the Laboratory is proposing to implement in future years. In contrast, this Operating Plan focuses on Argonne`s ongoing R&D programs, along with cost-saving measures and other improvements being implemented in Laboratory support operations.

NONE

1997-10-01T23:59:59.000Z

383

Operations Security Program  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish policies, responsibilities and authorities for implementing and sustaining the Department of Energy (DOE) Operations Security (OPSEC) Program. Cancels DOE O 5632.3B. Canceled by DOE O 471.2 of 9-28-1995.

1992-04-30T23:59:59.000Z

384

Plant Operations Executive Director  

E-Print Network [OSTI]

Campus North Campus Recycling Operations Materials Human Resources Payroll Misc Svs Special Projects Planning Spray Shop Glass Shop Upholstery Shop Plant IT Painting Services G. Weincouff Human Resources Business Services Estimating Shutdown Coordination Scheduling L. Rastique Human Resources 67398 M

Awtar, Shorya

385

Transmission and Storage Operations  

Energy Savers [EERE]

to see minimal to none in static or dynamic mode) - Rates are dependent on size, mechanical wear and operating pressures * PM * PdM 5 Methane Release Reduction Can the gas be...

386

Continuity of Operations  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The notice defines requirements and responsibilities for continuity of operations planning within the DOE to ensure the capability to continue essential Departmental functions across a wide range of all hazard emergencies. Does not cancel other directives.

2005-01-14T23:59:59.000Z

387

SNS Target Systems Operational  

E-Print Network [OSTI]

a failed gas seal on the shaft and leaking oil seals but has operated well since then · The moderator 7.5 k First target replacement · No observed corrosion · Internal Boroscope examination in progress · ~ 50 mm

McDonald, Kirk

388

Protection Program Operations  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Order establishes requirements for the management and operation of the Department of Energy (DOE) Federal Protective Forces (FPF), Contractor Protective Forces (CPF), and the Physical Security of property and personnel under the cognizance of DOE.

2014-10-14T23:59:59.000Z

389

CH Packaging Operations Manual  

SciTech Connect (OSTI)

This procedure provides instructions for assembling the CH Packaging Drum payload assembly, Standard Waste Box (SWB) assembly, Abnormal Operations and ICV and OCV Preshipment Leakage Rate Tests on the packaging seals, using a nondestructive Helium (He) Leak Test.

Washington TRU Solutions LLC

2005-06-13T23:59:59.000Z

390

Nuclear material operations manual  

SciTech Connect (OSTI)

This manual provides a concise and comprehensive documentation of the operating procedures currently practiced at Sandia National Laboratories with regard to the management, control, and accountability of nuclear materials. The manual is divided into chapters which are devoted to the separate functions performed in nuclear material operations-management, control, accountability, and safeguards, and the final two chapters comprise a document which is also issued separately to provide a summary of the information and operating procedures relevant to custodians and users of radioactive and nuclear materials. The manual also contains samples of the forms utilized in carrying out nuclear material activities. To enhance the clarity of presentation, operating procedures are presented in the form of playscripts in which the responsible organizations and necessary actions are clearly delineated in a chronological fashion from the initiation of a transaction to its completion.

Tyler, R.P.

1981-02-01T23:59:59.000Z

391

Corporate Operating Experience Program  

Broader source: Energy.gov [DOE]

The DOE Corporate Operating Experience Program helps to prevent the recurrence of significant adverse events/trends by sharing performance information, lessons learned and good practices across the DOE complex.

392

Operational Waste Volume Projection  

SciTech Connect (OSTI)

Waste receipts to the double-shell tank system are analyzed and wastes through the year 2015 are projected based on generation trends of the past 12 months. A computer simulation of site operations is performed, which results in projections of tank fill schedules, tank transfers, evaporator operations, tank retrieval, and aging waste tank usage. This projection incorporates current budget planning and the clean-up schedule of the Tri-Party Agreement. Assumptions were current as of June. 2000.

STRODE, J.N.

2000-08-28T23:59:59.000Z

393

Operational waste volume projection  

SciTech Connect (OSTI)

Waste receipts to the double-shell tank system are analyzed and wastes through the year 2015 are projected based on generation trends of the past 12 months. A computer simulation of site operations is performed, which results in projections of tank fill schedules, tank transfers, evaporator operations, tank retrieval, and aging waste tank usage. This projection incorporates current budget planning and the clean-up schedule of the Tri-Party Agreement. Assumptions were current as of June 1996.

Koreski, G.M.

1996-09-20T23:59:59.000Z

394

A low-neutron background slow-positron source.  

SciTech Connect (OSTI)

The addition of a thermionic rf gun [1] and a photocathode rf gun will allow the Advanced Photon Source (APS) linear accelerator (linac) [2] [3] to become a free-electron laser (FEL) driver [4]. As the FEL project progresses, the existing high-charge DC thermionic gun will no longer be critical to APS operation and could be used to generate high-energy or low-energy electrons to drive a slow-positron source. We investigated possibilities to create a useful low-energy source that could operate semi-independently and would have a low neutron background.

White, M. M.

1998-10-09T23:59:59.000Z

395

Tunable terahertz radiation source  

SciTech Connect (OSTI)

Terahertz radiation source and method of producing terahertz radiation, said source comprising a junction stack, said junction stack comprising a crystalline material comprising a plurality of self-synchronized intrinsic Josephson junctions; an electrically conductive material in contact with two opposing sides of said crystalline material; and a substrate layer disposed upon at least a portion of both the crystalline material and the electrically-conductive material, wherein the crystalline material has a c-axis which is parallel to the substrate layer, and wherein the source emits at least 1 mW of power.

Boulaevskii, Lev; Feldmann, David M; Jia, Quanxi; Koshelev, Alexei; Moody, Nathan A

2014-01-21T23:59:59.000Z

396

Microfabricated diffusion source  

DOE Patents [OSTI]

A microfabricated diffusion source to provide for a controlled diffusion rate of a vapor comprises a porous reservoir formed in a substrate that can be filled with a liquid, a headspace cavity for evaporation of the vapor therein, a diffusion channel to provide a controlled diffusion of the vapor, and an outlet to release the vapor into a gas stream. The microfabricated diffusion source can provide a calibration standard for a microanalytical system. The microanalytical system with an integral diffusion source can be fabricated with microelectromechanical systems technologies.

Oborny, Michael C. (Albuquerque, NM); Frye-Mason, Gregory C. (Cedar Crest, NM); Manginell, Ronald P. (Albuquerque, NM)

2008-07-15T23:59:59.000Z

397

Advanced Industrial Materials (AIM) Program Compilation of Project Summaries and Significant Accomplishments FY 1999  

SciTech Connect (OSTI)

For the past 10 years the Advanced Industrial Materials (AIM) has supported development of new and improved materials to enable U.S. industry to improve energy efficiency, increase productivity, and reduce waste. It has been a National Laboratory based program, with work currently under way at Oak Ridge National Laboratory, Los Alamos National Laboratory, and Sandia National Laboratories, in collaboration with industrial and university partners. With the advent of the Industries of the Future (IOF) strategy within the Office of Industrial Technologies (OIT) and the scheduled completion of the Continuous Fiber Ceramic Composites (CFCC) Program in FY 2002, an integrated materials program is being developed in OIT. So this represents the last summary of AIM research and development. The new program, Industrial Materials for the Future (IMF), will be competitive in operation, with solicitations for proposals for development of materials in accordance with the IOF Technology Roadmaps, followed by merit review and funding of the best proposals. Industry will take the lead in ''industry-specific'' research and development, in cooperation with National Laboratories, as needed. National Laboratories and universities will take the lead in maintaining a base technology program, for the purpose of maintaining a continuing flow of new materials technologies. The AIM and CFCC Programs will be replaced by the IMF program over a three year period, so that in FY 2004, all research and development will be in response to industry solicitations and Laboratory/university calls. The Program Manager believes that AIM has been an extremely successful program, thanks to the Laboratory investigators and their partners. For 10 years, the program has increased industrial participation from very little to nearly 100 percent. The CFCC Program, similarly, has been successful in advancing the knowledge of processing and property development in these materials, though much still can be done in advancing their uses in industry. It is hoped that the Industrial Materials for the Future Program will be equally successful, not only in solving industry's short-term, immediate needs, but also in maintaining a materials technology base that will lead to longer-range materials and processing developments. The projects summarized here will be carried to successful conclusions over the next 3 years and the current Laboratories in AIM and CFCC will be joined by other Laboratories, universities, and new industrial partners. The Program Manager expresses his profound appreciation for the very fine work done for OIT during the last 10 years.

Angelini, P

2000-08-08T23:59:59.000Z

398

A surface ionization source  

E-Print Network [OSTI]

The main part of the work described herein is the development and testing of a surface ionization source for use on a collinear fast beam laser spectroscopy apparatus. A description of the previously existing fast beam apparatus is given...

Buzatu, Daniel J.

1995-01-01T23:59:59.000Z

399

National Synchrotron Light Source  

ScienceCinema (OSTI)

A tour of Brookhaven's National Synchrotron Light Source (NSLS). The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviole

None

2010-01-08T23:59:59.000Z

400

Galactic Superluminal Sources  

E-Print Network [OSTI]

A new class of X-ray sources was clearly established with the discovery of highly relativistic radio jets from the galactic sources GRS 1915+105 and GRO J1655-40. Both of these objects have given us a broader view of black holes and the formation of jets, yet they also show the complexity of the accretion environment near relativistic objects. The fast apparent motion of the jets, their luminosity and variability, their high energy spectrum, and approximate scaling to the behavior of active galactic nuclei, certainly warrant the description "microquasar". I present a review of the observational data on these sources, and discuss where we stand on a physical picture of GRS 1915+105 and GRO J1655-40 as taken from multi-wavelength studies. I also point out other galactic sources which share some of the properties of the microquasars, and what to look for as a high energy "signature" in future observations.

B. A. Harmon

1998-12-21T23:59:59.000Z

Note: This page contains sample records for the topic "operations sources compiled" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

ION SOURCES FOR CYCLOTRONS  

E-Print Network [OSTI]

These utilize lasers, plasma focus, sparks, and ex plodingextractor voltage A plasma focus device has been used byf n a s Fig. 22: The plasma focus high charge state source

Clark, D.J.

2010-01-01T23:59:59.000Z

402

Computerized Energy Information Sources  

E-Print Network [OSTI]

Many computerized files of energy- and energy conservation-related information are currently available through commercial and governmental sources such as Lockheed Information Systems, System Development Corporation, and DOE/RECON. Private...

Gordon, D.

1979-01-01T23:59:59.000Z

403

PHARAO Laser Source Flight Model: Design and Performances  

E-Print Network [OSTI]

In this paper, we describe the design and the main performances of the PHARAO laser source flight model. PHARAO is a laser cooled cesium clock specially designed for operation in space and the laser source is one of the main sub-systems. The flight model presented in this work is the first remote-controlled laser system designed for spaceborne cold atom manipulation. The main challenges arise from mechanical compatibility with space constraints, which impose a high level of compactness, a low electric power consumption, a wide range of operating temperature and a vacuum environment. We describe the main functions of the laser source and give an overview of the main technologies developed for this instrument. We present some results of the qualification process. The characteristics of the laser source flight model, and their impact on the clock performances, have been verified in operational conditions.

Lvque, Thomas; Esnault, Franois-Xavier; Delaroche, Christophe; Massonnet, Didier; Grosjean, Olivier; Buffe, Fabrice; Torresi, Patrizia; Bomer, Thierry; Pichon, Alexandre; Braud, Pascal; Lelay, Jean-Pierre; Thomin, Stphane; Laurent, Philippe

2015-01-01T23:59:59.000Z

404

Field emission electron source  

DOE Patents [OSTI]

A novel field emitter material, field emission electron source, and commercially feasible fabrication method is described. The inventive field emission electron source produces reliable electron currents of up to 400 mA/cm.sup.2 at 200 volts. The emitter is robust and the current it produces is not sensitive to variability of vacuum or the distance between the emitter tip and the cathode. The novel emitter has a sharp turn-on near 100 volts.

Zettl, Alexander Karlwalter (Kensington, CA); Cohen, Marvin Lou (Berkeley, CA)

2000-01-01T23:59:59.000Z

405

National Synchrotron Light Source  

ScienceCinema (OSTI)

A tour of Brookhaven's National Synchrotron Light Source (NSLS), hosted by Associate Laboratory Director for Light Sources, Stephen Dierker. The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviolet, and x-ray light for basic and applied research in physics, chemistry, medicine, geophysics, environmental, and materials sciences.

BNL

2009-09-01T23:59:59.000Z

406

Control system for, and a method of, heating an operator station of a work machine  

DOE Patents [OSTI]

There are situations in which an operator remains in an operator station of a work machine when an engine of the work machine is inactive. The present invention includes a control system for, and a method of, heating the operator station when the engine is inactive. A heating system of the work machine includes an electrically-powered coolant pump, a power source, and at least one piece of warmed machinery. An operator heat controller is moveable between a first and a second position, and is operable to connect the electrically-powered coolant pump to the power source when the engine is inactive and the operator heat controller is in the first position. Thus, by deactivating the engine and then moving the operator heat controller to the first position, the operator may supply electrical energy to the electrically-powered coolant pump, which is operably coupled to heat the operator station.

Baker, Thomas M.; Hoff, Brian D.; Akasam, Sivaprasad

2005-04-05T23:59:59.000Z

407

SSCL Commissioning and Operations  

SciTech Connect (OSTI)

The SSC, with an energy of 20 TeV/Beam, requires a sequence of individual accelerators of increasing energy in the injector chain. These are the Linac, Low Energy Booster, Medium Energy Booster, and High Energy Booster. Each accelerator system must be completed in sequence in order to provide beam to the next higher energy accelerator. The collider itself is comprised of ten sectors, each of which in terms of superconducting magnet bending strength, is equivalent to two HEB injectors. The completion of all injectors and collider sectors is required before stored beams can circulate in preparation for colliding beam operation. Four experimental halls are planned for the detector systems. Each major detector will be assembled in one of the halls by a world-wide collaboration of scientists. In addition, above ground facilities provide shops and test facilities for accelerator technical systems, superconducting magnet and materials research and development, and for detector assembly and operations. The purpose of this report is to present a plan for the sequential commissioning and operation of these individual accelerators and other technical facilities of the SSC. A central objective of this plan is to describe the activities at the SSCL that are not included as part of the construction project TPC, even though they occur during the overall project construction time-frame. Examples of such activities include the operation of general laboratory facilities and services not specifically related to construction, the operating costs for the individual accelerators in the injector chain once these facilities have been commissioned, and the costs of SSCL physics research groups. The Department of Energy has provided the following decision with regard to these operations categories for the SSCL.

NONE

1992-03-31T23:59:59.000Z

408

Source replenishment device for vacuum deposition  

DOE Patents [OSTI]

A material source replenishment device for use with a vacuum deposition apparatus is described. The source replenishment device comprises an intermittent motion producing gear arrangement disposed within the vacuum deposition chamber. An elongated rod having one end operably connected to the gearing arrangement is provided with a multiarmed head at the opposite end disposed adjacent the heating element of the vacuum deposition apparatus. An inverted U-shaped source material element is releasably attached to the outer end of each arm member whereby said multiarmed head is moved to locate a first of said material elements above said heating element, whereupon said multiarmed head is lowered to engage said material element with the heating element and further lowered to release said material element on the heating element. After vaporization of said material element, second and subsequent material elements may be provided to the heating element without the need for opening the vacuum deposition apparatus to the atmosphere.

Hill, R.A.

1986-05-15T23:59:59.000Z

409

Updated July 2009 Operations Organization  

E-Print Network [OSTI]

All-Hands, Brown Bags, and COO Open-Door sessions Ongoing Conduct Operations Employee Climate SurveysOperations Strategic Plan Updated July 2009 #12;Operations Organization Chief Operating Officer deliver exceptional operational services in support of the scientific mission of Berkeley Lab. goals

Eisen, Michael

410

Pulsed ion beam source  

DOE Patents [OSTI]

An improved pulsed ion beam source is disclosed having a new biasing circuit for the fast magnetic field. This circuit provides for an initial negative bias for the field created by the fast coils in the ion beam source which pre-ionize the gas in the source, ionize the gas and deliver the gas to the proper position in the accelerating gap between the anode and cathode assemblies in the ion beam source. The initial negative bias improves the interaction between the location of the nulls in the composite magnetic field in the ion beam source and the position of the gas for pre-ionization and ionization into the plasma as well as final positioning of the plasma in the accelerating gap. Improvements to the construction of the flux excluders in the anode assembly are also accomplished by fabricating them as layered structures with a high melting point, low conductivity material on the outsides with a high conductivity material in the center. 12 figs.

Greenly, J.B.

1997-08-12T23:59:59.000Z

411

New results in atomic physics at the Advanced Light Source  

SciTech Connect (OSTI)

The Advanced Light Source is the world's first low-energy third-generation synchrotron radiation source. It has been running reliably and exceeding design specifications since it began operation in October 1993. It is available to a wide community of researchers in many scientific fields, including atomic and molecular science and chemistry. Here, new results in atomic physics at the Advanced Light Source demonstrate the opportunities available in atomic and molecular physics at this synchrotron light source. The unprecedented brightness allows experiments with high flux, high spectral resolution, and nearly 100% linear polarization.

Schlachter, A.S.

1995-01-01T23:59:59.000Z

412

Management of Disused Radioactive Sealed Sources in Egypt - 13512  

SciTech Connect (OSTI)

The future safe development of nuclear energy and progressive increasing use of sealed sources in medicine, research, industry and other fields in Egypt depends on the safe and secure management of disused radioactive sealed sources. In the past years have determined the necessity to formulate and apply the integrated management program for radioactive sealed sources to assure harmless and ecological rational management of disused sealed sources in Egypt. The waste management system in Egypt comprises operational and regulatory capabilities. Both of these activities are performed under legislations. The Hot Laboratories and Waste Management Center HLWMC, is considered as a centralized radioactive waste management facility in Egypt by law 7/2010. (authors)

Mohamed, Y.T.; Hasan, M.A.; Lasheen, Y.F. [Hot Laboratories and Waste Management Center, Egyptian Atomic Energy Authority, 11787, Cairo (Egypt)] [Hot Laboratories and Waste Management Center, Egyptian Atomic Energy Authority, 11787, Cairo (Egypt)

2013-07-01T23:59:59.000Z

413

Electron cyclotron resonance microwave ion sources for thin film processing  

SciTech Connect (OSTI)

Plasmas created by microwave absorption at the electron cyclotron resonance (ECR) are increasingly used for a variety of plasma processes, including both etching and deposition. ECR sources efficiently couple energy to electrons and use magnetic confinement to maximize the probability of an electron creating an ion or free radical in pressure regimes where the mean free path for ionization is comparable to the ECR source dimensions. The general operating principles of ECR sources are discussed with special emphasis on their use for thin film etching. Data on source performance during Cl base etching of Si using an ECR system are presented. 32 refs., 5 figs.

Berry, L.A.; Gorbatkin, S.M.

1990-01-01T23:59:59.000Z

414

Hoyte Phifer Facilities Operations  

E-Print Network [OSTI]

battery operated clocks in offices. #12;#12;·Last year, UNCG produced over 1973 tons of solid waste. · 1. , corner of Highland Ave. and Oakland ­ red brick building #12;#12; "All State agencies, universities, and community colleges that have State-owned vehicle fleets shall develop and implement plans to improve

Saidak, Filip

415

Concept of Operations: Essence  

SciTech Connect (OSTI)

This concept of operations is designed to give the reader a brief overview of the National Rural Electric Cooperative Associations Essence project and a description of the Essence device design. The data collected by the device, how the data are used, and how the data are protected are also discussed in this document.

Hutton, William J.

2014-04-01T23:59:59.000Z

416

Conduct of Operations  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Order defines the requirements for establishing and implementing Conduct of Operations Programs at Department of Energy (DOE), including National Nuclear Security Administration (NNSA), facilities and projects. Cancels DOE O 5480.19. Admin Chg 1, dated 6-25-13, cancels DOE O 422.1. Certified 12-3-14.

2010-06-29T23:59:59.000Z

417

Finance & Operations Vice President,  

E-Print Network [OSTI]

Operations · Public Safety Educational Outreach · Safe IA Partnership (S.I.P) · Security Guard Programs Assistance Program · Employee Immigration Services · Employee Disability Services · Family Services · Compensation & Classification · Employee & Labor Relations · Employment Services · Family Issues Committee

Stanier, Charlie

418

REACTOR OPERATIONS AND CONTROL  

E-Print Network [OSTI]

REACTOR OPERATIONS AND CONTROL KEYWORDS: core calculations, neural networks, control rod elevation of a control rod, or a group of control rods, is an important parameter from the viewpoint of reactor control DETERMINATION OF PWR CONTROL ROD POSITION BY CORE PHYSICS AND NEURAL NETWORK METHODS NINOS S. GARIS* and IMRE

Pázsit, Imre

419

Intelligent Potroom Operation  

SciTech Connect (OSTI)

The Intelligent Potroom Operation project focuses on maximizing the performance of an aluminum smelter by innovating components for an intelligent manufacturing system. The Intelligent Potroom Advisor (IPA) monitors process data to identify reduction cells exhibiting behaviors that require immediate attention. It then advises operational personnel on those heuristic-based actions to bring the cell back to an optimal operating state in order to reduce the duration and frequency of substandard reduction cell performance referred to as ''Off-Peak Modes'' (OPMs). Techniques developed to identify cells exhibiting OPMs include the use of a finite element model-based cell state estimator for defining the cell's current operating state via advanced cell noise analyses. In addition, rule induction was also employed to identify statistically significant complex behaviors that occur prior to OPMs. The intelligent manufacturing system design, concepts and formalisms developed in this project w ere used as a basis for an intelligent manufacturing system design. Future research will incorporate an adaptive component to automate continuous process improvement, a technology platform with the potential to improve process performance in many of the other Industries of the Future applications as well.

Jan Berkow; Larry Banta

2003-07-29T23:59:59.000Z

420

NUCLEAR PLANT OPERATIONS AND  

E-Print Network [OSTI]

NUCLEAR PLANT OPERATIONS AND CONTROL KEYWORDS: moderator temper ature coefficient, reactivity co reactor Unit 4 of the Ringhals Nuclear Power Plant (Sweden) during fuel cycle 16 is analyzed absorption cross-section behavior. Consequently, if NUCLEAR TECHNOLOGY VOL. 140 NOV. 2002 147 #12;Demazire

Demazire, Christophe

Note: This page contains sample records for the topic "operations sources compiled" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

NUCLEAR PLANT OPERATIONS AND  

E-Print Network [OSTI]

NUCLEAR PLANT OPERATIONS AND CONTROL KEYWORDS: moderator temper- ature coefficient, reactivity co reactor Unit 4 of the Ringhals Nuclear Power Plant (Sweden) during fuel cycle 16 is analyzed. Consequently, if*E-mail: demaz@nephy.chalmers.se NUCLEAR TECHNOLOGY VOL. 140 NOV. 2002 147 #12;high-burnup fuel

Pzsit, Imre

422

Hamiltonian and Volume Operators  

E-Print Network [OSTI]

2+1 gravity coupled to a massless scalar field has an initial singularity when the spatial slices are compact. The quantized model is used here to investigate several issues of quantum gravity. The spectrum of the volume operator is studied at the initial singularity. The energy spectrum is obtained. Dynamics of the universe is also investigated.

M. Pierri

2002-01-04T23:59:59.000Z

423

Office of Business Operations  

Broader source: Energy.gov [DOE]

The Office of Business Operations manages financial and acquisition management programs throughout the Associate Under Secretary for the Office of Environment, Health, Safety and Security (AU), including the formulation and execution of the AU budget; funding control and accounting activities; preparation of management studies; and provision of acquisition management support.

424

RUNWAY OPERATIONAL QUALITY ASSURANCE  

E-Print Network [OSTI]

RUNWAY OPERATIONAL QUALITY ASSURANCE MELANIE BAKER, DARIC MEGERSA & ALFONSO PANLILIO Sponsors: Dr Vortex Separation Rule, for a homogeneous fleet mix, is determined by the time between arriving aircraft Occupancy (SRO) rule, for a non- homogeneous fleet mix, MTC= 3600/ [ROT] [ROT]= = i (pi *ROTi) ROT (in sec

425

INEEL Source Water Assessment  

SciTech Connect (OSTI)

The Idaho National Engineering and Environmental Laboratory (INEEL) covers approximately 890 mi2 and includes 12 public water systems that must be evaluated for Source water protection purposes under the Safe Drinking Water Act. Because of its size and location, six watersheds and five aquifers could potentially affect the INEELs drinking water sources. Based on a preliminary evaluation of the available information, it was determined that the Big Lost River, Birch Creek, and Little Lost River Watersheds and the eastern Snake River Plain Aquifer needed to be assessed. These watersheds were delineated using the United States Geologic Surveys Hydrological Unit scheme. Well capture zones were originally estimated using the RESSQC module of the Environmental Protection Agencys Well Head Protection Area model, and the initial modeling assumptions and results were checked by running several scenarios using Modflow modeling. After a technical review, the resulting capture zones were expanded to account for the uncertainties associated with changing groundwater flow directions, a thick vadose zone, and other data uncertainties. Finally, all well capture zones at a given facility were merged to a single wellhead protection area at each facility. A contaminant source inventory was conducted, and the results were integrated with the well capture zones, watershed and aquifer information, and facility information using geographic information system technology to complete the INEELs Source Water Assessment. Of the INEELs 12 public water systems, three systems rated as low susceptibility (EBR-I, Main Gate, and Gun Range), and the remainder rated as moderate susceptibility. No INEEL public water system rated as high susceptibility. We are using this information to develop a source water management plan from which we will subsequently implement an INEEL-wide source water management program. The results are a very robust set of wellhead protection areas that will protect the INEELs public water systems yet not too conservative to inhibit the INEEL from carrying out its missions.

Sehlke, Gerald

2003-03-01T23:59:59.000Z

426

COMBUSTION SOURCES OF NITROGEN COMPOUNDS  

E-Print Network [OSTI]

Rasmussen, R.A. (1976). Combustion as a source of nitrousx control for stationary combustion sources. Prog. Energy,CA, March 3-4, 1977 COMBUSTION SOURCES OF NITROGEN COMPOUNDS

Brown, Nancy J.

2011-01-01T23:59:59.000Z

427

OLED area illumination source  

DOE Patents [OSTI]

The present invention relates to an area illumination light source comprising a plurality of individual OLED panels. The individual OLED panels are configured in a physically modular fashion. Each OLED panel comprising a plurality of OLED devices. Each OLED panel comprises a first electrode and a second electrode such that the power being supplied to each individual OLED panel may be varied independently. A power supply unit capable of delivering varying levels of voltage simultaneously to the first and second electrodes of each of the individual OLED panels is also provided. The area illumination light source also comprises a mount within which the OLED panels are arrayed.

Foust, Donald Franklin (Scotia, NY); Duggal, Anil Raj (Niskayuna, NY); Shiang, Joseph John (Niskayuna, NY); Nealon, William Francis (Gloversville, NY); Bortscheller, Jacob Charles (Clifton Park, NY)

2008-03-25T23:59:59.000Z

428

Development of the Long Pulse Negative Ion Source for ITER  

SciTech Connect (OSTI)

A model of the ion source designed for the neutral beam injectors of the International Thermonuclear Experimental Reactor (ITER), the KAMABOKO III ion source, is being tested on the MANTIS test stand at the DRFC Cadarache in collaboration with JAERI, Japan, who designed and supplied the ion source. The ion source is attached to a 3 grid 30 keV accelerator (also supplied by JAERI) and the accelerated negative ion current is determined from the energy deposited on a calorimeter located 1.6 m from the source.During experiments on MANTIS three adverse effects of long pulse operation were found: The negative ion current to the calorimeter is {approx_equal}50% of that obtained from short pulse operation Increasing the plasma grid (PG) temperature results in {<=}40% enhancement in negative ion yield, substantially below that reported for short pulse operation, {>=}100%. The caesium 'consumption' is up to 1500 times that expected.Results presented here indicate that each of these is, at least partially, explained by thermal effects. Additionally presented are the results of a detailed characterisation of the source, which enable the most efficient mode of operation to be identified.

Hemsworth, R.S.; Svensson, L.; Esch, H.P.L. de; Krylov, A.; Massmann, P. [Association EURATOM-CEA, CEA/DSM/DRFC, CEA-Cadarache, 13108 St Paul-lez-Durance (France); Boilson, D. [Association EURATOM-DCU, PRL/NCPST, Glasnevin, Dublin 13 (Ireland); Fanz, U. [Association EURATOM-IPP, Max-Planck-Institut fuer Plasmaphysik D-85748 Garching (Germany); Zaniol, B. [CONSORZIO RFX Association EURATOM-ENEA, Corso Stati Uniti 4, I-35127 Padova (Italy)

2005-04-06T23:59:59.000Z

429

Ground-source Heat Pumps Applied to Commercial Buildings  

SciTech Connect (OSTI)

Ground-source heat pumps can provide an energy-efficient, cost-effective way to heat and cool commercial facilities. While ground-source heat pumps are well established in the residential sector, their application in larger, commercial-style, facilities is lagging, in part because of a lack of experience with the technology by those in decision-making positions. Through the use of a ground-coupling system, a conventional water-source heat pump design is transformed to a unique means of utilizing thermodynamic properties of earth and groundwater for efficient operation throughout the year in most climates. In essence, the ground (or groundwater) serves as a heat source during winter operation and a heat sink for summer cooling. Many varieties in design are available, so the technology can be adapted to almost any site. Ground-source heat pump systems can be used widely in commercial-building applications and, with proper installation, offer great potential for the commercial sector, where increased efficiency and reduced heating and cooling costs are important. Ground-source heat pump systems require less refrigerant than conventional air-source heat pumps or air-conditioning systems, with the exception of direct-expansion-type ground-source heat pump systems. This chapter provides information and procedures that an energy manager can use to evaluate most ground-source heat pump applications. Ground-source heat pump operation, system types, design variations, energy savings, and other benefits are explained. Guidelines are provided for appropriate application and installation. Two case studies are presented to give the reader a sense of the actual costs and energy savings. A list of manufacturers and references for further reading are included for prospective users who have specific or highly technical questions not fully addressed in this chapter. Sample case spreadsheets are provided in Appendix A. Additional appendixes provide other information on the ground-source heat pump technology.

Parker, Steven A.; Hadley, Donald L.

2009-07-14T23:59:59.000Z

430

Operations and Maintenance Program Structure  

Broader source: Energy.gov [DOE]

The Federal Energy Management Program recommends Federal operations and maintenance (O&M) programs comprise of five distinct functions: operations, maintenance, engineering, training, and...

431

Cable Measuring Engine Operation Procedures  

E-Print Network [OSTI]

MEASURING ENGINE OPERATION PROCEDURES LBNL-40565 SC-MAG-597MEASURING ENGINE OPERATION PROCEDURES INDEX IN T ROD U C TCALIBRATION PROCEDURE . .

Authors, Various

2011-01-01T23:59:59.000Z

432

Response Operations | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Electricity Delivery and Energy Reliability Response Operations Response Operations Overview The federal government primarily plays a coordinating and support role during...

433

Cable Measuring Engine Operation Procedures  

E-Print Network [OSTI]

gov CABLE MEASURING ENGINE OPERATION PROCEDURES LBNL-40565LBNL-40565 CABLE MEASURING ENGINE OPERATION PROCEDURES INDEXThe Cable Measuring Engine (CME) is a tool which measures

Authors, Various

2011-01-01T23:59:59.000Z

434

10 years and 20,000 sources: the offsite source recovery project  

SciTech Connect (OSTI)

The Global Threat Reduction Initiative's (GTRI) Offsite Source Recovery Project (OSRP) has been recovering excess and unwanted sealed sources for ten years. In January 2009, GTRI announced that the project had recovered 20,000 sealed radioactive sources. This project grew out of early efforts at Los Alamos National Laboratory (LANL) to recover and disposition excess Plutonium-239 (Pu-239) sealed sources that were distributed in the 1960s and 1970s under the Atoms for Peace Program. Sealed source recovery was initially considered a waste management activity, as evidenced by its initial organization under the Department of Energy's (DOE's) Environmental Management (EM) program. After the terrorist attacks of 2001, however, the interagency community began to recognize the threat posed by excess and unwanted radiological material, particularly those that could not be disposed at the end of their useful life. After being transferred to the National Nuclear Security Administration (NNSA) to be part of GTRI, OSRP's mission was expanded to include not only material that would be classified as Greater-than-Class-C (GTCC) when it became waste, but also any other materials that might be a 'national security consideration.' This paper discusses OSRP's history, recovery operations, expansion to accept high-activity beta-gamma-emitting sealed sources and devices and foreign-possessed sources, and more recent efforts such as cooperative projects with the Council on Radiation Control Program Directors (CRCPD) and involvement in GTRI's Search and Secure project. Current challenges and future work will also be discussed.

Whitworth, Julia R [Los Alamos National Laboratory; Abeyta, Cristy L [Los Alamos National Laboratory; Pearson, Michael W [Los Alamos National Laboratory

2009-01-01T23:59:59.000Z

435

Selective ion source  

DOE Patents [OSTI]

A ion source is described wherein selected ions maybe extracted to the exclusion of unwanted ion species of higher ionization potential. Also described is a method of producing selected ions from a compound, such as P{sup +} from PH{sub 3}. The invention comprises a plasma chamber, an electron source, a means for introducing a gas to be ionized by electrons from the electron source, means for limiting electron energy from the electron source to a value between the ionization energy of the selected ion species and the greater ionization energy of an unwanted ion specie, and means for extracting the target ion specie from the plasma chamber. In one embodiment, the electrons are generated in a plasma cathode chamber immediately adjacent to the plasma chamber. A small extractor draws the electrons from the plasma cathode chamber into the relatively positive plasma chamber. The energy of the electrons extracted in this manner is easily controlled. The invention is particularly useful for doping silicon with P{sup +}, As{sup +}, and B{sup +} without the problematic presence of hydrogen, helium, water, or carbon oxide ions. Doped silicon is important for manufacture of semiconductors and semiconductor devices. 6 figs.

Leung, K.N.

1996-05-14T23:59:59.000Z

436

Selective ion source  

DOE Patents [OSTI]

A ion source is described wherein selected ions maybe extracted to the exclusion of unwanted ion species of higher ionization potential. Also described is a method of producing selected ions from a compound, such as P.sup.+ from PH.sub.3. The invention comprises a plasma chamber, an electron source, a means for introducing a gas to be ionized by electrons from the electron source, means for limiting electron energy from the electron source to a value between the ionization energy of the selected ion species and the greater ionization energy of an unwanted ion specie, and means for extracting the target ion specie from the plasma chamber. In one embodiment, the electrons are generated in a plasma cathode chamber immediately adjacent to the plasma chamber. A small extractor draws the electrons from the plasma cathode chamber into the relatively positive plasma chamber. The energy of the electrons extracted in this manner is easily controlled. The invention is particularly useful for doping silicon with P.sup.+, AS.sup.+, and B.sup.+ without the problematic presence of hydrogen, helium, water, or carbon oxide ions. Doped silicon is important for manufacture of semiconductors and semiconductor devices.

Leung, Ka-Ngo (Hercules, CA)

1996-01-01T23:59:59.000Z

437

Sealed Radioactive Source Accountability  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish Department of Energy (DOE) interim policy and to provide guidance for sealed radioactive source accountability. The directive does not cancel any directives. Extended by DOE N 5400.10 to 12-24-93 & Extended by DOE N 5400.12 to 12-24-94.

1991-12-24T23:59:59.000Z

438

Sealed Radioactive Source Accountability  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Notice extends DOE N 5400.9, Sealed Radioactive Source Accountability, of 12-24-91, until 12-24-95, unless sooner superseded or rescinded. The contents of DOE N 5400.9 will be updated and incorporated in the revised DOE O 5480.11, Radiation Protection for Occupational Workers.

1994-12-22T23:59:59.000Z

439

STANDARD OPERATING PROCEDURES Sampler Maintenance by Site Operators  

E-Print Network [OSTI]

IMPROVE STANDARD OPERATING PROCEDURES SOP 201 Sampler Maintenance by Site Operators Date Last.0 PURPOSE AND APPLICABILITY This standard operating procedure (SOP) describes the procedures and schedules. The procedural steps for weekly maintenance and repairs performed by the site operator are included in TI 201A

Fischer, Emily V.

440

Hadronic Total Cross Sections (R) in E+E- Interactions: Data from DOE laboratory experiments as compiled in data reviews by the Durham High Energy Physics Database Group  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

A comprehensive compilation of experimental data on total hadronic cross sections, and R ratios, in e+e- interactions is presented. Published data from the Novosibirsk, Orsay, Frascati, SLAC, CORNELL, DESY, KEK and CERN e+e- colliders on both exclusive and inclusive final particle states are included from threshold energies to the highest LEP energies. The data are presented in tabular form supplemented by compilation plots of different exclusive final particle states and of different energy regions. (Taken from abstract of paper, A Compilation of Data on Hadronic Total Cross Sections in E+E- Interactions, M.R. Whalley, Journal of Physics G (Nuclear and Particle Physics), Volume 29, Number 12A, 2003). The Durham High Energy Physics (HEP) Database Group makes these data, extracted from papers and data reviews, available in one place in an easy-to-access format. The data are also included in the Durham HEP Reaction Data Database, which can be searched at http://hepdata.cedar.ac.uk/reaction

Whalley, M.R.

Note: This page contains sample records for the topic "operations sources compiled" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Ground-source heat pump case studies and utility programs  

SciTech Connect (OSTI)

Ground-source heat pump systems are one of the promising new energy technologies that has shown rapid increase in usage over the past ten years in the United States. These systems offer substantial benefits to consumers and utilities in energy (kWh) and demand (kW) savings. The purpose of this study was to determine what existing monitored data was available mainly from electric utilities on heat pump performance, energy savings and demand reduction for residential, school and commercial building applications. In order to verify the performance, information was collected for 253 case studies from mainly utilities throughout the United States. The case studies were compiled into a database. The database was organized into general information, system information, ground system information, system performance, and additional information. Information was developed on the status of demand-side management of ground-source heat pump programs for about 60 electric utility and rural electric cooperatives on marketing, incentive programs, barriers to market penetration, number units installed in service area, and benefits.

Lienau, P.J.; Boyd, T.L.; Rogers, R.L.

1995-04-01T23:59:59.000Z

442

OPERATOR'S MANUAL IMPORTANT NOTES  

E-Print Network [OSTI]

-3 B) LOAD CONNECTION (I) and PAR. 3-3 C) LOAD CONNECTION (II) add the following: Load connectionsMODEL OPERATOR'S MANUAL IMPORTANT NOTES: 1) This manual is valid for the following Model: BOP 20-20, BOP 36-12, BOP 50-8, BOP 72-6, BOP 100-4 BOP 100W, 200W, 400W POWER SUPPLY #12;#12;1 LOAD

Kleinfeld, David

443

Operations Task Management (OTM)  

SciTech Connect (OSTI)

This paper reviews the steps taken by management at Ashland Oil to reduce expenses, including an analysis of every aspect of the refinery. It was determined that the areas most adaptable to improvement were the maintenance department, storerooms, the laboratory and energy utilization. The authors focus, however, on the difficulties met in implementing an effective cost control program in the operations area, detailing the reasons why and examining the system ultimately installed in this area.

Miller, C.B.; Duck, C.H.

1985-10-01T23:59:59.000Z

444

DCO Operations Interesting Statistics  

E-Print Network [OSTI]

DCO Operations Interesting Statistics 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 Chart by: HANDS DOWN SOFTWARE, www.handsdownsoftware.com 1.00 0.95 0.90 0.85 0.80 0.75 0.70 0.65 0.60 0 is annotated with the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE

445

Operations Cost Allocation Project  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratorySpeeding access1 TechnicalOilOnlineandOperations

446

First `Winged' and `X'-shaped Radio Source Candidates  

SciTech Connect (OSTI)

A small number of double-lobed radio galaxies (17 from our own census of the literature) show an additional pair of low surface brightness ''wings'', thus forming an overall ''X''-shaped appearance. The origin of the wings in these radio sources is unclear. They may be the result of back-flowing plasma from the currently active radio lobes into an asymmetric medium surrounding the active nucleus, which would make these ideal systems in which to study thermal/non-thermal plasma interactions in extragalactic radio sources. Another possibility is that the wings are the aging radio lobes left over after a (rapid) realignment of the central supermassive black-hole/accretion disk system due perhaps to a merger. Generally, these models are not well tested; with the small number of known examples, previous works focused on detailed case studies of selected sources with little attempt at a systematic study of a large sample. Using the VLA-FIRST survey database, we are compiling a large sample of winged and X-shaped radio sources for such studies. As a first step toward this goal, an initial sample of 100 new candidate objects of this type are presented in this paper. The search process is described, optical identifications from available literature data, and basic radio data are presented. From the limited resolution FIRST images ({approx} 5''), we can already confidently classify a sufficient number of these objects as having the characteristic wing lengths >80% of the active lobes to more than double the number of known X-shaped radio sources. We have also included as candidates, radio sources with shorter wings (<80% wing to lobe length ratios), or simply ''winged'' sources, as it is probable that projection effects are important. Finally, among the candidates are four quasars (z=0.37 to 0.84), and several have morphologies suggestive of Fanaroff-Riley type-I (low-power) radio galaxies. While followup observations are necessary to confirm these identifications, this stresses the importance of source orientation and imaging limitations in finding these enigmatic objects.

Cheung, C.C.

2007-01-22T23:59:59.000Z

447

X-ray source assembly having enhanced output stability, and fluid stream analysis applications thereof  

DOE Patents [OSTI]

An x-ray source assembly and method of operation are provided having enhanced output stability. The assembly includes an anode having a source spot upon which electrons impinge and a control system for controlling position of the anode source spot relative to an output structure. The control system can maintain the anode source spot location relative to the output structure notwithstanding a change in one or more operating conditions of the x-ray source assembly. One aspect of the disclosed invention is most amenable to the analysis of sulfur in petroleum-based fuels.

Radley, Ian (Glenmont, NY); Bievenue, Thomas J. (Delmar, NY); Burdett, John H. (Charlton, NY); Gallagher, Brian W. (Guilderland, NY); Shakshober, Stuart M. (Hudson, NY); Chen, Zewu (Schenectady, NY); Moore, Michael D. (Alplaus, NY)

2008-06-08T23:59:59.000Z

448

Computer controlled fluorometer device and method of operating same  

DOE Patents [OSTI]

A computer controlled fluorometer device and method of operating same, said device being made to include a pump flash source and a probe flash source and one or more sample chambers in combination with a light condenser lens system and associated filters and reflectors and collimators, as well as signal conditioning and monitoring means and a programmable computer means and a software programmable source of background irradiance that is operable according to the method of the invention to rapidly, efficiently and accurately measure photosynthetic activity by precisely monitoring and recording changes in fluorescence yield produced by a controlled series of predetermined cycles of probe and pump flashes from the respective probe and pump sources that are controlled by the computer means.

Kolber, Zbigniew (Shoreham, NY); Falkowski, Paul (Stony Brook, NY)

1990-01-01T23:59:59.000Z

449

Computer controlled fluorometer device and method of operating same  

DOE Patents [OSTI]

A computer controlled fluorometer device and method of operating same, said device being made to include a pump flash source and a probe flash source and one or more sample chambers in combination with a light condenser lens system and associated filters and reflectors and collimators, as well as signal conditioning and monitoring means and a programmable computer means and a software programmable source of background irradiance that is operable according to the method of the invention to rapidly, efficiently and accurately measure photosynthetic activity by precisely monitoring and recording changes in fluorescence yield produced by a controlled series of predetermined cycles of probe and pump flashes from the respective probe and pump sources that are controlled by the computer means. 13 figs.

Kolber, Z.; Falkowski, P.

1990-07-17T23:59:59.000Z

450

Proceedings of the 10th international workshop on ECR ion sources  

SciTech Connect (OSTI)

This report contains papers on the following topics: Recent Developments and Future Projects on ECR Ion Sources; Operation of the New KVI ECR Ion Source at 10 GHz; Operational Experience and Status of the INS SF-ECR Ion Source; Results of the New ECR4'' 14.5 GHz ECRIS; Preliminary Performance of the AECR; Experimental Study of the Parallel and Perpendicular Particle Losses from an ECRIS Plasma; Plasma Instability in Electron Cyclotron Resonance Heated Ion Sources; The Hyperbolic Energy Analyzer; Status of ECR Source Development; The New 10 GHz CAPRICE Source; First Operation of the Texas A M ECR Ion Source; Recent Developments of the RIKEN ECR Ion Sources; The 14 GHz CAPRICE Source; Characteristics and Potential Applications of an ORNL Microwave ECR Multicusp Plasma Ion Source; ECRIPAC: The Production and Acceleration of Multiply Charged Ions Using an ECR Plasma; ECR Source for the HHIRF Tandem Accelerator; Feasibility Studies for an ECR-Generated Plasma Stripper; Production of Ion Beams by using the ECR Plasmas Cathode; A Single Stage ECR Source for Efficient Production of Radioactive Ion Beams; The Single Staged ECR Source at the TRIUMF Isotope Separator TISOL; The Continuous Wave, Optically Pumped H{sup {minus}} Source; The H{sup +} ECR Source for the LAMPF Optically Pumped Polarized Ion Source; Present Status of the Warsaw CUSP ECR Ion Source; An ECR Source for Negative Ion Production; GYRAC-D: A Device for a 200 keV ECR Plasma Production and Accumulation; Status Report of the 14.4 GHZ ECR in Legnaro; Status of JYFL-ECRIS; Report on the Uppsala ECRIS Facility and Its Planned Use for Atomic Physics; A 10 GHz ECR Ion Source for Ion-Electron and Ion-Atom Collision Studies; and Status of the ORNL ECR Source Facility for Multicharged Ion Collision Research.

Meyer, F W; Kirkpatrick, M I [eds.

1991-01-01T23:59:59.000Z

451

Predicting performance across compilations  

E-Print Network [OSTI]

Symposium on Computer Architecture, May 2002. [27] P. C.Symposium on Computer Architecture, June 2003. [42] X.core architectures. Computer Architecture Letters, 2, Apr.

Lau, Jeremy

2007-01-01T23:59:59.000Z

452

Compiler Construction Lecture 22  

E-Print Network [OSTI]

IS (A) as follows: 1 if = A w P, then is[] IS (A) 2 if = A w0A1w1 . . . Arwr P, then is[; IS (A1), . . . , IS (Ar)] IS (A) 2 test whether there exists = A w0A1w1 . . . Arwr P such that the following relation

Ábrahám, Erika

453

Compilation of ETR Summaries  

Office of Environmental Management (EM)

and piping and instrumentation diagrams. To view the full ETR reports, please visit this web site: http:www.em.doe.govPagesExternalTechReviews.aspx July 2009 The purpose of an...

454

Cray Compilers at NERSC  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to User GroupInformationE-GovNatural GasCourseCraig Szymanski

455

Compilation of ETR Summaries  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTieCelebrate Earth Codestheat TwoDepartment14, 2008 | Department

456

Compilation of TRA Summaries  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTieCelebrate Earth Codestheat TwoDepartment14, 2008 |

457

Intel Compilers at NERSC  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickrinformation for and NovelFEG-SEM with0, First Solar, Inc.IntelIntel

458

FAS Nuclear Data Compilations  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing ZirconiaPolicy andExsolution Enhanced OilExtracting theExtremeMtoAct

459

*BBRP compilation3  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNG IHDR€ÍSolar Energy41 (Dollars and Sense(ANL-IN-03-032) - EnergyOilinfraredj

460

GNU Compilers at NERSC  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickr Flickr Editor's note:ComputingFusionSanGE Global ResearchGNU

Note: This page contains sample records for the topic "operations sources compiled" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

NERSC Compiler Introduction  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Opticalhttp://www.fnal.gov/directorate/nalcal/nalcal02_07_05_files/nalcal.gif Directorate - EventsNEETNEPAChemical7/11 U N C

462

Compilation Introduction & architecture MIPS  

E-Print Network [OSTI]

L16; L17: f16 = b[2]; f18 = a[2]; f17 = f12 * f13; f19 = b[3]; f20 = a[3]; f15 = f14 * f15; f12 = a[4]; f16 = f18 * f16; f19 = f29 * f19; f13 = b[4]; a += 4; f14 = a[1]; f11 += f17; r1 += 4; f10 += f += f26; dp += f28; dp += f1; dp += f10; dp += f11; if (r1 >= n) goto L5; L19: f30 = a[0]; f18 = b[0]; r

Blazy, Sandrine

463

Oswer source book. Volume 2. Training and technology transfer resources, 1992-1993  

SciTech Connect (OSTI)

Volumes I and II of The OSWER Source Book provide information on the many training courses, publications, videotapes, and information systems and software available to support EPA staff, State and local agencies, and others involved in managing the Nation's hazardous and solid waste programs. The Office of Solid Waste and Emergency Response's (OSWER) Technology Innovation Office (TIO) has compiled listings of the most significant training and technology transfer resources available to assist individuals with the responsibility for accomplishing OSWER's mission. Volume II contains frequently requested OSW publications, including those that address municipal solid waste and recycling. This second volume of The Source Book is new for this edition, and provides much additional information compared to the earlier version.

Not Available

1992-09-01T23:59:59.000Z

464

Development of a hydraulic borehole seismic source  

SciTech Connect (OSTI)

This report describes a 5 year, $10 million Sandia/Industry project to develop an advanced borehole seismic source for use in oil and gas exploration and production. The development Team included Sandia, Chevron, Amoco, Conoco, Exxon, Raytheon, Pelton, and GRI. The seismic source that was developed is a vertically oriented, axial point force, swept frequency, clamped, reaction-mass vibrator design. It was based on an early Chevron prototype, but the new tool incorporates a number of improvements which make it far superior to the original prototype. The system consists of surface control electronics, a special heavy duty fiber optic wireline and draw works, a cablehead, hydraulic motor/pump module, electronics module, clamp, and axial vibrator module. The tool has a peak output of 7,000 lbs force and a useful frequency range of 5 to 800 Hz. It can operate in fluid filled wells with 5.5-inch or larger casing to depths of 20,000 ft and operating temperatures of 170 C. The tool includes fiber optic telemetry, force and phase control, provisions to add seismic receiver arrays below the source for single well imaging, and provisions for adding other vibrator modules to the tool in the future. The project yielded four important deliverables: a complete advanced borehole seismic source system with all associated field equipment; field demonstration surveys funded by industry showing the utility of the system; industrial sources for all of the hardware; and a new service company set up by their industrial partner to provide commercial surveys.

Cutler, R.P.

1998-04-01T23:59:59.000Z

465

A comparison of ground source heat pumps and micro-combined heat and power as residential greenhouse gas reduction strategies  

E-Print Network [OSTI]

Both ground source heat pumps operating on electricity and micro-combined heat and power systems operating on fossil fuels offer potential for the reduction of green house gas emissions in comparison to the conventional ...

Guyer, Brittany (Brittany Leigh)

2009-01-01T23:59:59.000Z

466

PINS-3X Operations  

SciTech Connect (OSTI)

Idaho National Laboratorys (INLs) Portable Isotopic Neutron Spectroscopy System (PINS) non-intrusively identifies the chemical fill of munitions and sealed containers. The PINS-3X variant of the system is used to identify explosives and uses a deuterium-tritium (DT) electronic neutron generator (ENG) as the neutron source. Use of the system, including possession and use of the neutron generator and shipment of the system components requires compliance with a number of regulations. This report outlines some of these requirements as well as some of the requirements in using the system outside of INL.

E.H. Seabury

2013-09-01T23:59:59.000Z

467

Calibrated vapor generator source  

DOE Patents [OSTI]

A portable vapor generator is disclosed that can provide a controlled source of chemical vapors, such as, narcotic or explosive vapors. This source can be used to test and calibrate various types of vapor detection systems by providing a known amount of vapors to the system. The vapor generator is calibrated using a reference ion mobility spectrometer. A method of providing this vapor is described, as follows: explosive or narcotic is deposited on quartz wool, placed in a chamber that can be heated or cooled (depending on the vapor pressure of the material) to control the concentration of vapors in the reservoir. A controlled flow of air is pulsed over the quartz wool releasing a preset quantity of vapors at the outlet. 10 figs.

Davies, J.P.; Larson, R.A.; Goodrich, L.D.; Hall, H.J.; Stoddard, B.D.; Davis, S.G.; Kaser, T.G.; Conrad, F.J.

1995-09-26T23:59:59.000Z

468

Evaluated teletherapy source library  

DOE Patents [OSTI]

The Evaluated Teletherapy Source Library (ETSL) is a system of hardware and software that provides for maintenance of a library of useful phase space descriptions (PSDs) of teletherapy sources used in radiation therapy for cancer treatment. The PSDs are designed to be used by PEREGRINE, the all-particle Monte Carlo dose calculation system. ETSL also stores other relevant information such as monitor unit factors (MUFs) for use with the PSDs, results of PEREGRINE calculations using the PSDs, clinical calibration measurements, and geometry descriptions sufficient for calculational purposes. Not all of this information is directly needed by PEREGRINE. It also is capable of acting as a repository for the Monte Carlo simulation history files from which the generic PSDs are derived.

Cox, Lawrence J. (Los Alamos, NM); Schach Von Wittenau, Alexis E. (Livermore, CA)

2000-01-01T23:59:59.000Z

469

The European Spallation Source  

SciTech Connect (OSTI)

The European Spallation Source (ESS) is a 5 MW, 2.5 GeV long pulse proton linac, to be built and commissioned in Lund, Sweden. The Accelerator Design Update (ADU) project phase is under way, to be completed at the end of 2012 by the delivery of a Technical Design Report. Improvements to the 2003 ESS design will be summarised, and the latest design activities will be presented.

Peggs, S; Eshraqi, M; Hahn, H; Jansson, A; Lindroos, M; Ponton, A; Rathsman, K; Trahern, G; Bousso, S; Calaga, R; Devanz, G; Duperrier, R D; Eguia, J; Gammino, S; Moller, S P; Oyon, C; Ruber, R.J.M.Y.

2011-03-01T23:59:59.000Z

470

Design and operation of the electron beam ion trap  

SciTech Connect (OSTI)

This report describes the basic features and operating principles of the Electron Beam Ion Trap. The differences between EBIT and other sources of highly charged ions are outlined. Its features and operating parameters are discussed. The report also explains why certain design choices were necessary and the constraints involved in building an electron beam ion trap. EBIT's evaporation cooling system is described in detail. 13 refs., 8 figs.

Vogel, D.

1990-05-30T23:59:59.000Z

471

Tunable pulsed narrow bandwidth light source  

DOE Patents [OSTI]

A tunable pulsed narrow bandwidth light source and a method of operating a light source are provided. The light source includes a pump laser, first and second non-linear optical crystals, a tunable filter, and light pulse directing optics. The method includes the steps of operating the pump laser to generate a pulsed pump beam characterized by a nanosecond pulse duration and arranging the light pulse directing optics so as to (i) split the pulsed pump beam into primary and secondary pump beams; (ii) direct the primary pump beam through an input face of the first non-linear optical crystal such that a primary output beam exits from an output face of the first non-linear optical crystal; (iii) direct the primary output beam through the tunable filter to generate a sculpted seed beam; and direct the sculpted seed beam and the secondary pump beam through an input face of the second non-linear optical crystal such that a secondary output beam characterized by at least one spectral bandwidth on the order of about 0.1 cm.sup.-1 and below exits from an output face of the second non-linear optical crystal.

Powers, Peter E. (Dayton, OH); Kulp, Thomas J. (Livermore, CA)

2002-01-01T23:59:59.000Z

472

Capillary discharge source  

DOE Patents [OSTI]

Debris generation from an EUV electric discharge plasma source device can be significantly reduced or essentially eliminated by encasing the electrodes with dielectric or electrically insulating material so that the electrodes are shielded from the plasma, and additionally by providing a path for the radiation to exit wherein the electrodes are not exposed to the area where the radiation is collected. The device includes: (a) a body, which is made of an electrically insulating material, that defines a capillary bore that has a proximal end and a distal end and that defines at least one radiation exit; (b) a first electrode that defines a first channel that has a first inlet end that is connected to a source of gas and a first outlet end that is in communication with the capillary bore, wherein the first electrode is positioned at the distal end of the capillary bore; (c) a second electrode that defines a second channel that has a second inlet end that is in communication with the capillary bore and an outlet end, wherein the second electrode is positioned at the proximal end of the capillary bore; and (d) a source of electric potential that is connected across the first and second electrodes, wherein radiation generated within the capillary bore is emitted through the at least one radiation exit and wherein the first electrode and second electrode are shielded from the emitted radiation.

Bender, III, Howard Albert

2003-11-25T23:59:59.000Z

473

IBRD Operational Decision Framework  

SciTech Connect (OSTI)

The IBRD Operational Decision Framework in this document is an expansion of an emerging general risk management framework under development by an interagency working group. It provides the level of detail necessary to develop a general Consequence Management Guidance Document for biological contamination remediation and restoration. It is the intent of this document to support both wide area and individual site remediation and restoration activities. This product was initiated as a portion of the IBRD Task 1 Systems Analysis to aid in identification of wide area remediation and restoration shortcomings and gaps. The draft interagency general risk management framework was used as the basis for the analysis. The initial Task 1 analysis document expanded the draft interagency framework to a higher level of resolution, building on both the logic structure and the accompanying text explanations. It was then employed in a qualitative manner to identify responsible agencies, data requirements, tool requirements, and current capabilities for each decision and task. This resulted in identifying shortcomings and gaps needing resolution. Several meetings of a joint LLNL/SNL working group reviewed and approved the initial content of this analysis. At the conclusion of Task 1, work continued on the expanded framework to generate this Operational Decision Framework which is consistent with the existing interagency general risk management framework. A large LLNL task group met repeatedly over a three-month period to develop the expanded framework, coordinate the framework with the biological remediation checklist, and synchronize the logic with the Consequence Management Plan table of contents. The expanded framework was briefed at a large table top exercise reviewing the interagency risk management framework. This exercise had representation from major US metropolitan areas as well as national agencies. This product received positive comments from the participants. Upon completion of the Operational Decision Framework, another joint LLNL/SNL working group conducted a day-long review. Identified modifications were made to the document, resulting in the included product.

Greenwalt, R; Hibbard, W; Raber, E; Carlsen, T; Folks, K; MacQueen, D; Mancieri, S; Bunt, T; Richards, J; Hirabayashi-Dethier, J

2010-11-12T23:59:59.000Z

474

Equipment Operational Requirements  

SciTech Connect (OSTI)

The Iraq Department of Border Enforcement is rich in personnel, but poor in equipment. An effective border control system must include detection, discrimination, decision, tracking and interdiction, capture, identification, and disposition. An equipment solution that addresses only a part of this will not succeed, likewise equipment by itself is not the answer without considering the personnel and how they would employ the equipment. The solution should take advantage of the existing in-place system and address all of the critical functions. The solutions are envisioned as being implemented in a phased manner, where Solution 1 is followed by Solution 2 and eventually by Solution 3. This allows adequate time for training and gaining operational experience for successively more complex equipment. Detailed descriptions of the components follow the solution descriptions. Solution 1 - This solution is based on changes to CONOPs, and does not have a technology component. It consists of observers at the forts and annexes, forward patrols along the swamp edge, in depth patrols approximately 10 kilometers inland from the swamp, and checkpoints on major roads. Solution 2 - This solution adds a ground sensor array to the Solution 1 system. Solution 3 - This solution is based around installing a radar/video camera system on each fort. It employs the CONOPS from Solution 1, but uses minimal ground sensors deployed only in areas with poor radar/video camera coverage (such as canals and streams shielded by vegetation), or by roads covered by radar but outside the range of the radar associated cameras. This document provides broad operational requirements for major equipment components along with sufficient operational details to allow the technical community to identify potential hardware candidates. Continuing analysis will develop quantities required and more detailed tactics, techniques, and procedures.

Greenwalt, B; Henderer, B; Hibbard, W; Mercer, M

2009-06-11T23:59:59.000Z

475

ARM - SGP Operations  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc Documentation RUC :ProductsSCM Forcing Data DerivedInstrumentsPolarExtended FacilityOperations

476

Operations Information for Studies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 The 2002 WholesaleEnergy'sRunning jobsOPERATING

477

Operations | Argonne National Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 The 2002 WholesaleEnergy'sRunningOperations Two Argonne teams each

478

Operations Research Analysts  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328 2,683DieselValuesEIA-782A andProduct: Total583093Operations

479

New Operation Schedule  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest Regionat Cornell Batteries &NSTCurrent IssuesHypothesisNew Operation

480

Crane Operation Training  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phases on &gamma;-Al2O3.Winter (Part 2) | DepartmentCrane Operational

Note: This page contains sample records for the topic "operations sources compiled" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Operation and Maintenance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratorySpeeding access1 TechnicalOilOnlineand Future DirectionOperations

482

Operations & Maintenance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratorySpeeding access1 TechnicalOilOnlineand FutureOperationalRates

483

Operations & Maintenance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratorySpeeding access1 TechnicalOilOnlineandOperations and Maintenance

484

Parastillation Process in Operations  

E-Print Network [OSTI]

PARASTII.IMICN PIO:ESS rn OPERATIONS Frank canfield ChenShare Coq:oration Houston, Texas The Parastillation process is a new rrethod for ITU.11ti-stage, counter-current contact between vapor and liquid that results in 33% rrore ideal stages... than distillation for a given tray spaci.n;J. Patents have been granted in the U.S.A., U.K., Europe and other countries. Perfonnance of the process has been confimm aver the past several years by eat1puter siITU.llation, by laboratory tests...

Canfield, F.; Jenkins, O.

485

Extending quantum operations  

SciTech Connect (OSTI)

For a given set of input-output pairs of quantum states or observables, we ask the question whether there exists a physically implementable transformation that maps each of the inputs to the corresponding output. The physical maps on quantum states are trace-preserving completely positive maps, but we also consider variants of these requirements. We generalize the definition of complete positivity to linear maps defined on arbitrary subspaces, then formulate this notion as a semidefinite program, and relate it by duality to approximative extensions of this map. This gives a characterization of the maps which can be approximated arbitrarily well as the restriction of a map that is completely positive on the whole algebra, also yielding the familiar extension theorems on operator spaces. For quantum channel extensions and extensions by probabilistic operations we obtain semidefinite characterizations, and we also elucidate the special case of Abelian inputs or outputs. Finally, revisiting a theorem by Alberti and Uhlmann, we provide simpler and more widely applicable conditions for certain extension problems on qubits, and by using a semidefinite programming formulation we exhibit counterexamples to seemingly reasonable but false generalizations of the Alberti-Uhlmann theorem.

Heinosaari, Teiko [Turku Centre for Quantum Physics, Department of Physics and Astronomy, University of Turku (Finland); Jivulescu, Maria A. [Department of Mathematics, University Politehnica Timisoara, 300006 Timisoara (Romania); Reeb, David; Wolf, Michael M. [Department of Mathematics, Technische Universitaet Muenchen, 85748 Garching (Germany)

2012-10-15T23:59:59.000Z

486

Physics and modeling of an end-Hall (gridless) ion source  

SciTech Connect (OSTI)

In an end-Hall source, an ion beam is extracted from a magnetized plasma and accelerated by the plasma electric field without grids. The principle of end-Hall sources is similar to that of Hall effect thrusters (or closed-drift thrusters), but their design is optimized for processing applications (ion beam assisted deposition or substrate cleaning) rather than propulsion. The beam divergence is larger in end-Hall ion sources, and these sources can operate at low ion energies. Although end-Hall sources are commonly used in the surface processing industry, no detailed modeling of these sources is available, and their operation is quite empirical. In this paper, a self-consistent, two-dimensional, quasineutral model of an end-Hall ion source is developed and used in order to improve the understanding of the basic physics of these plasma sources and to quantify the parameters controlling the properties of the extracted ion beam.

Oudini, N. [Universite de Toulouse, UPS, INPT, LAPLACE (Laboratoire Plasma et Conversion d'Energie), 118 route de Narbonne, F-31062 Toulouse cedex 9 (France); Hagelaar, G. J. M.; Boeuf, J.-P.; Garrrigues, L. [Universite de Toulouse, UPS, INPT, LAPLACE (Laboratoire Plasma et Conversion d'Energie), 118 route de Narbonne, F-31062 Toulouse cedex 9 (France); CNRS, LAPLACE, F-31062 Toulouse (France)

2011-04-01T23:59:59.000Z

487

Nuisance Source Population Modeling for Radiation Detection System Analysis  

SciTech Connect (OSTI)

A major challenge facing the prospective deployment of radiation detection systems for homeland security applications is the discrimination of radiological or nuclear 'threat sources' from radioactive, but benign, 'nuisance sources'. Common examples of such nuisance sources include naturally occurring radioactive material (NORM), medical patients who have received radioactive drugs for either diagnostics or treatment, and industrial sources. A sensitive detector that cannot distinguish between 'threat' and 'benign' classes will generate false positives which, if sufficiently frequent, will preclude it from being operationally deployed. In this report, we describe a first-principles physics-based modeling approach that is used to approximate the physical properties and corresponding gamma ray spectral signatures of real nuisance sources. Specific models are proposed for the three nuisance source classes - NORM, medical and industrial. The models can be validated against measured data - that is, energy spectra generated with the model can be compared to actual nuisance source data. We show by example how this is done for NORM and medical sources, using data sets obtained from spectroscopic detector deployments for cargo container screening and urban area traffic screening, respectively. In addition to capturing the range of radioactive signatures of individual nuisance sources, a nuisance source population model must generate sources with a frequency of occurrence consistent with that found in actual movement of goods and people. Measured radiation detection data can indicate these frequencies, but, at present, such data are available only for a very limited set of locations and time periods. In this report, we make more general estimates of frequencies for NORM and medical sources using a range of data sources such as shipping manifests and medical treatment statistics. We also identify potential data sources for industrial source frequencies, but leave the task of estimating these frequencies for future work. Modeling of nuisance source populations is only useful if it helps in understanding detector system performance in real operational environments. Examples of previous studies in which nuisance source models played a key role are briefly discussed. These include screening of in-bound urban traffic and monitoring of shipping containers in transit to U.S. ports.

Sokkappa, P; Lange, D; Nelson, K; Wheeler, R

2009-10-05T23:59:59.000Z

488

Status and special features of the Atomki ECR ion source  

SciTech Connect (OSTI)

The ECR ion source has been operating in ATOMKI (Debrecen) since 1996. During the past 15 years lots of minor and numerous major technical modifications have been carried out on the ECRIS. Many of these changes aimed the increasing of beams charge, intensity, and the widening of the ion choice. Another group of the modifications were performed to develop special, non-standard operation modes or to produce peculiar plasmas and beams.

Biri, S. [Institute of Nuclear Research (ATOMKI), H-4026 Debrecen, Bem ter 18/c (Hungary); Racz, R. [Institute of Nuclear Research (ATOMKI), H-4026 Debrecen, Bem ter 18/c (Hungary); University of Debrecen, H-4010 Debrecen, Egyetem ter 1 (Hungary); Palinkas, J. [University of Debrecen, H-4010 Debrecen, Egyetem ter 1 (Hungary)

2012-02-15T23:59:59.000Z

489

Inverter for interfacing advanced energy sources to a utility grid  

DOE Patents [OSTI]

A transistor is operated in the PWM mode such that a hlaf sine wave of current is delivered first to one-half of a distribution transformer and then the other as determined by steering thyristors operated at the fundamental sinusoidal frequency. Power to the transistor is supplied by a dc source such as a solar array and the power is converted such that a sinusoidal current is injected into a utility at near unity power factor.

Steigerwald, Robert L. (Scotia, NY)

1984-01-01T23:59:59.000Z

490

SYNCHROTRON RADIATION SOURCES  

SciTech Connect (OSTI)

Synchrotron radiation is a very bright, broadband, polarized, pulsed source of light extending from the infrared to the x-ray region. It is an extremely important source of Vacuum Ultraviolet radiation. Brightness is defined as flux per unit area per unit solid angle and is normally a more important quantity than flux alone particularly in throughput limited applications which include those in which monochromators are used. It is well known from classical theory of electricity and magnetism that accelerating charges emit electromagnetic radiation. In the case of synchrotron radiation, relativistic electrons are accelerated in a circular orbit and emit electromagnetic radiation in a broad spectral range. The visible portion of this spectrum was first observed on April 24, 1947 at General Electric's Schenectady facility by Floyd Haber, a machinist working with the synchrotron team, although the first theoretical predictions were by Lienard in the latter part of the 1800's. An excellent early history with references was presented by Blewett and a history covering the development of the utilization of synchrotron radiation was presented by Hartman. Synchrotron radiation covers the entire electromagnetic spectrum from the infrared region through the visible, ultraviolet, and into the x-ray region up to energies of many 10's of kilovolts. If the charged particles are of low mass, such as electrons, and if they are traveling relativistically, the emitted radiation is very intense and highly collimated, with opening angles of the order of 1 milliradian. In electron storage rings there are three possible sources of synchrotron radiation; dipole (bending) magnets; wigglers, which act like a sequence of bending magnets with alternating polarities; and undulators, which are also multi-period alternating magnet systems but in which the beam deflections are small resulting in coherent interference of the emitted light.

HULBERT,S.L.; WILLIAMS,G.P.

1998-07-01T23:59:59.000Z

491

Compact ion accelerator source  

DOE Patents [OSTI]

An ion source includes a conductive substrate, the substrate including a plurality of conductive nanostructures with free-standing tips formed on the substrate. A conductive catalytic coating is formed on the nanostructures and substrate for dissociation of a molecular species into an atomic species, the molecular species being brought in contact with the catalytic coating. A target electrode placed apart from the substrate, the target electrode being biased relative to the substrate with a first bias voltage to ionize the atomic species in proximity to the free-standing tips and attract the ionized atomic species from the substrate in the direction of the target electrode.

Schenkel, Thomas; Persaud, Arun; Kapadia, Rehan; Javey, Ali

2014-04-29T23:59:59.000Z

492

The European Spallation Source  

SciTech Connect (OSTI)

In 2003 the joint European effort to design a European Spallation Source (ESS) resulted in a set of reports, and in May 2009 Lund was agreed to be the ESS site. The ESS Scandinavia office has since then worked on setting all the necessary legal and organizational matters in place so that the Design Update and construction can be started in January 2011, in collaboration with European partners. The Design Update phase is expected to end in 2012, to be followed by a construction phase, with first neutrons expected in 2018-2019.

Lindroos M.; Calaga R.; Bousson S.; Danared H.; Devanz G. et al

2011-04-20T23:59:59.000Z

493

Photon Source Parameters  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 TheStevenAdministrationPhotometric Variations asPhoton Source

494

SOURCE SELECTION INFORMATION -  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGY TAXBalancedDepartmentRestrictions onSBBiodiesel | DepartmentSLACofof98-02|10,SOURCE

495

Photon Source Parameters  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home Design Passive SolarCenter |Photoinduced electronPhoton Source

496

Sources of tritium  

SciTech Connect (OSTI)

A review of tritium sources is presented. The tritium production and release rates are discussed for light water reactors (LWRs), heavy water reactors (HWRs), high temperature gas cooled reactors (HTGRs), liquid metal fast breeder reactors (LMFBRs), and molten salt breeder reactors (MSBRs). In addition, release rates are discussed for tritium production facilities, fuel reprocessing plants, weapons detonations, and fusion reactors. A discussion of the chemical form of the release is included. The energy producing facilities are ranked in order of increasing tritium production and release. The ranking is: HTGRs, LWRs, LMFBRs, MSBRs, and HWRs. The majority of tritium has been released in the form of tritiated water.

Phillips, J.E.; Easterly, C.E.

1980-12-01T23:59:59.000Z

497

Microwave generated plasma light source apparatus  

SciTech Connect (OSTI)

A microwave generated plasma light source including a microwave generator, a microwave cavity having a light reflecting member forming at least a portion of the cavity, and a member transparent to light and opaque to microwaves disposed across an opening of the cavity opposite the feeding opening through which the microwave generator is coupled. An electrodeless discharge bulb is disposed at a position in the cavity such that the cavity operates as a resonant cavity at least when the bulb is emitting light. In the bulb is encapsulated at least one discharge light emissive substance. The bulb has a shape and is sufficiently small that the bulb acts substantially as a point light source.

Yoshizawa, K.; Ito, H.; Kodama, H.; Komura, H.; Minowa, Y.

1985-02-05T23:59:59.000Z

498

Cyclotron-based neutron source for BNCT  

SciTech Connect (OSTI)

Kyoto University Research Reactor Institute (KURRI) and Sumitomo Heavy Industries, Ltd. (SHI) have developed a cyclotron-based neutron source for Boron Neutron Capture Therapy (BNCT). It was installed at KURRI in Osaka prefecture. The neutron source consists of a proton cyclotron named HM-30, a beam transport system and an irradiation and treatment system. In the cyclotron, H- ions are accelerated and extracted as 30 MeV proton beams of 1 mA. The proton beams is transported to the neutron production target made by a beryllium plate. Emitted neutrons are moderated by lead, iron, aluminum and calcium fluoride. The aperture diameter of neutron collimator is in the range from 100 mm to 250 mm. The peak neutron flux in the water phantom is 1.8 Multiplication-Sign 109 neutrons/cm{sup 2}/sec at 20 mm from the surface at 1 mA proton beam. The neutron source have been stably operated for 3 years with 30 kW proton beam. Various pre-clinical tests including animal tests have been done by using the cyclotron-based neutron source with {sup 10}B-p-Borono-phenylalanine. Clinical trials of malignant brain tumors will be started in this year.

Mitsumoto, T.; Yajima, S.; Tsutsui, H.; Ogasawara, T.; Fujita, K. [Sumitomo Heavy Industries, Ltd (Japan); Tanaka, H.; Sakurai, Y.; Maruhashi, A. [Kyoto University Research Reactor Institute (Japan)

2013-04-19T23:59:59.000Z

499

Advanced RF power sources for linacs  

SciTech Connect (OSTI)

In order to maintain a reasonable over-all length at high center-of-mass energy, the main linac of an electron-positron linear collider must operate at a high accelerating gradient. For copper (non-superconducting) accelerator structures, this implies a high peak power per unit length and a high peak power per RF source, assuming a limited number of discrete sources are used. To provide this power, a number of devices are currently under active development or conceptual consideration: conventional klystrons with multi-cavity output structures, gyroklystrons, magnicons, sheet-beam klystrons, multiple-beam klystrons and amplifiers based on the FEL principle. To enhance the peak power produced by an rf source, the SLED rf pulse compression scheme is currently in use on existing linacs, and new compression methods that produce a flatter output pulse are being considered for future linear colliders. This paper covers the present status and future outlook for the more important rf power sources and pulse compression systems. It should be noted that high gradient electron linacs have applications in addition to high-energy linear colliders; they can, for example, serve as compact injectors for FEL`s and storage rings.

Wilson, P.B.

1996-10-01T23:59:59.000Z

500

High power THz sources for nonlinear imaging  

SciTech Connect (OSTI)

Many biological and chemical compounds have unique absorption features in the THz (0.1 - 10 THz) region, making the use of THz waves attractive for imaging in defense, security, biomedical imaging, and monitoring of industrial processes. Unlike optical radiation, THz frequencies can pass through many substances such as paper, clothing, ceramic, etc. with little attenuation. The use of currently available THz systems is limited by lack of highpower, sources as well as sensitive detectors and detector arrays operating at room temperature. Here we present a novel, high power THz source based on intracavity downconverison of optical pulses. The source delivers 6 ps pulses at 1.5 THz, with an average power of >300 ?W and peak powers >450 mW. We propose an imaging method based on frequency upconverison that is ideally suited to use the narrow bandwidth and high peak powers produced by the source. By upconverting the THz image to the infrared, commercially available detectors can be used for real time imaging.

Tekavec, Patrick F.; Kozlov, Vladimir G. [Microtech Instruments, 858 West Park Street, Eugene, OR 97401 (United States)

2014-02-18T23:59:59.000Z