National Library of Energy BETA

Sample records for open-access article distributed

  1. Articles about Distributed Wind | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Articles about Distributed Wind Articles about Distributed Wind Below are stories about distributed wind featured by the U.S. Department of Energy (DOE) Wind Program. October 1,...

  2. OPEN ACCESS IOP Publishing

    Office of Scientific and Technical Information (OSTI)

    Science and Technology of Advanced Materials OPEN ACCESS IOP Publishing Sci. Technol. Adv. Mater. 14 (2013) 014207 (7pp) doi:10.1088/1468-6996/14/1/014207 A thermo-mechanical correlation with driving forces for hcp martensite and twin formations in the Fe-Mn-C system exhibiting multicomposition sets Jinichiro Nakano US Department of Energy National Energy Technology Laboratory, 1450 Queen Avenue, Albany, OR 97321, USA URS Corporation, PO Box 1959, Albany, OR 97321, USA E-mail:

  3. Articles about Distributed Wind | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Distributed Wind Articles about Distributed Wind Below are stories about distributed wind featured by the U.S. Department of Energy (DOE) Wind Program. October 1, 2015 Articles about Distributed Wind Energy Department Helps Manufacturers of Small and Mid-Size Wind Turbines Meet Certification Requirements On October 1, the Energy Department's National Renewable Energy Laboratory (NREL) released a fourth round of requests for proposals under the Energy Department's Competitiveness Improvement

  4. International Electricity Trade - Open Access | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    International Electricity Trade - Open Access International Electricity Trade - Open Access DOE has consistently expressed its policy that international electricity trade should be ...

  5. International Electricity Trade- Open Access

    Broader source: Energy.gov [DOE]

    DOE has consistently expressed its policy that international electricity trade should be subject to the same principles of comparable open access and non-discrimination that apply to transmission in interstate commerce. DOE has stated this policy in export authorizations granted to entities requesting authority to export over international transmission facilities. In those authorizations, DOE indicated it expected transmitting utilities owning cross-border facilities constructed pursuant to Presidential permits to provide access across the border in accordance with the principles of comparable open access and non-discrimination contained in the Federal Power Act and articulated in Federal Energy Regulatory Commission Order No. 888, as amended.

  6. Open Access: From Myth to Paradox

    ScienceCinema (OSTI)

    Ginsparg, Paul [Cornell University, Ithaca, New York, United States

    2010-01-08

    True open access to scientific publications not only gives readers the possibility to read articles without paying subscription, but also makes the material available for automated ingestion and harvesting by 3rd parties. Once articles and associated data become universally treatable as computable objects, openly available to 3rd party aggregators and value-added services, what new services can we expect, and how will they change the way that researchers interact with their scholarly communications infrastructure? I will discuss straightforward applications of existing ideas and services, including citation analysis, collaborative filtering, external database linkages, interoperability, and other forms of automated markup, and speculate on the sociology of the next generation of users.

  7. Proposed Open Access Requirement for International Electric Transmissi...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Open Access Requirement for International Electric Transmission Facilities and Delegation ... Proposed Open Access Requirement for International Electric Transmission Facilities and ...

  8. Open Access Transmission and Renewable Energy Technologies

    SciTech Connect (OSTI)

    Porter, K.

    1996-09-01

    In April 1996, the Federal Regulatory Commission (PERC) approved Orders 888 and 889 and released a draft rule for public comment on capacity reservation tariffs (CRTs). Order No. 888 requires electric utilities to file transmission tariffs that would allow transmission access to third parties who want to conduct wholesale transactions, and Order No. 889 requires transmission-owning utilities to set up open access, same-time information systems (OASIS), using commercial software and Internet protocols. This paper discusses these Orders in detail, as well as some of the issues before FERC with implications for renewables, which include: transmission pricing; transmission terms and conditions; reassignment of transmission capacity; defining state and FERC jurisdiction over transmission and distribution; the pricing of ancillary services; and the adoption and implementation of independent system operators.

  9. Proposed Open Access Requirement for International Electric Transmission

    Energy Savers [EERE]

    Facilities and Delegation to the Federal Energy Regulatory Commission: Federal Register Notice Volume 64, No. 143 - Jul. 27, 1999 | Department of Energy Open Access Requirement for International Electric Transmission Facilities and Delegation to the Federal Energy Regulatory Commission: Federal Register Notice Volume 64, No. 143 - Jul. 27, 1999 Proposed Open Access Requirement for International Electric Transmission Facilities and Delegation to the Federal Energy Regulatory Commission:

  10. Analysis of FERC's Final EIS for Electricity Open Access & Recovery of Stranded Costs

    Reports and Publications (EIA)

    1996-01-01

    Reviews the Final Environmental Impact Statement (FEIS) prepared by the Federal Energy Regulatory Commission for its electricity transmission system open access prepared in April 1996 and uses the National Energy Modeling System (NEMS) to analyze the open access rule (Orders 888 and 889).

  11. Open-access databases as unprecedented resources and drivers of cultural change in fisheries science

    SciTech Connect (OSTI)

    McManamay, Ryan A; Utz, Ryan

    2014-01-01

    Open-access databases with utility in fisheries science have grown exponentially in quantity and scope over the past decade, with profound impacts to our discipline. The management, distillation, and sharing of an exponentially growing stream of open-access data represents several fundamental challenges in fisheries science. Many of the currently available open-access resources may not be universally known among fisheries scientists. We therefore introduce many national- and global-scale open-access databases with applications in fisheries science and provide an example of how they can be harnessed to perform valuable analyses without additional field efforts. We also discuss how the development, maintenance, and utilization of open-access data are likely to pose technical, financial, and educational challenges to fisheries scientists. Such cultural implications that will coincide with the rapidly increasing availability of free data should compel the American Fisheries Society to actively address these problems now to help ease the forthcoming cultural transition.

  12. Recommendations for mass spectrometry data quality metrics for open access data(corollary to the Amsterdam principles)

    SciTech Connect (OSTI)

    Kingsinger, Christopher R.; Apffel, James; Baker, Mark S.; Bian, Xiaopeng; Borchers, Christoph H.; Bradshaw, Ralph A.; Brusniak, Mi-Youn; Chan, Daniel W.; Deutsch, Eric W.; Domon, Bruno; Gorman, Jeff; Grimm, Rudolf; Hancock, William S.; Hermjakob, Henning; Horn, David; Hunter, Christie; Kolar, Patrik; Kraus, Hans-Joachim; Langen, Hanno; Linding, Rune; Moritz, Robert L.; Omenn, Gilbert S.; Orlando, Ron; Pandey, Akhilesh; Ping, Peipei; Rahbar, Amir; Rivers, Robert; Seymour, Sean L.; Simpson, Richard J.; Slotta, Douglas; Smith, Richard D.; Stein, Stephen E.; Tabb, David L.; Tagle, Danilo; Yates, John R.; Rodriguez, Henry

    2011-12-01

    Policies supporting the rapid and open sharing of proteomic data are being implemented by the leading journals in the field. The proteomics community is taking steps to ensure that data are made publicly accessible and are of high quality, a challenging task that requires the development and deployment of methods for measuring and documenting data quality metrics. On September 18, 2010, the U.S. National Cancer Institute (NCI) convened the 'International Workshop on Proteomic Data Quality Metrics' in Sydney, Australia, to identify and address issues facing the development and use of such methods for open access proteomics data. The stakeholders at the workshop enumerated the key principles underlying a framework for data quality assessment in mass spectrometry data that will meet the needs of the search community, journals, funding agencies, and data repositories. Attendees discussed and agreed upon two primary needs for the wide use of quality metrics: (i)an evolving list of comprehensive quality metrics and (ii)standards accompanied by software analytics. Attendees stressed the importance of increased education and training programs to promote reliable protocols in proteomics. This workshop report explores the historic precedents, key discussions, and necessary next steps to enhance the quality of open access data. By agreement, this article is published simultaneously in Proteomics, Proteomics Clinical Applications, Journal of Proteome Research, and Molecular and Cellular Proteomics, as a public service to the research community.The peer review process was a coordinated effort conducted by a panel of referees selected by the journals.

  13. Postdoc brings open access issue to the table > Archived News Stories > The

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Materials Center at Cornell Postdoc brings open access issue to the table June 4th, 2014 › By Anne Ju Robert Barker/University Photography Jimmy O'Dea helped start a discussion at Cornell about an open-access policy. Cornell scientists report research discoveries almost every day, but to the nonacademic world, clicking on a link to a published paper usually leads to a pay wall, barring access without a journal subscription. Many feel that such research - often paid for at least in

  14. Open Access

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    access, is a type of unrestricted access to scholarly publications that is online, free of charge to everyone and free of most copyright and licensing restrictions. Open...

  15. Standards in Genomic Science: An Open-Access Journal of the Genomic Standards Consortium (GSC8 Meeting)

    ScienceCinema (OSTI)

    Garrity, George

    2011-06-03

    George Garrity of Michigan State University talks about the GSC's open-access journal SIGS at the Genomic Standards Consortium's 8th meeting at the DOE JGI in Walnut Creek, Calif. on Sept. 9, 2009.

  16. ARM - Facility News Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    May 18, 2012 Facility News Building Blocks for Discovery: ARM Data Joins DataCite Open Access Registry Bookmark and Share DataCite is a not-for-profit organization that aims to...

  17. NATIONAL GEOTHERMAL DATA SYSTEM: AN EXEMPLAR OF OPEN ACCESS TO DATA

    SciTech Connect (OSTI)

    Blackman, Harold; Blackman, Harold M.; Blackman, Harold M.; Blackman, Harold; Blackman, Harold; Blackman, Harold

    2013-10-01

    The formal launch of National Geothermal Data System (NGDS – www.geothermaldata.org) in 2014 will provide open access to technical geothermal-relevant data from all of the Department of Energy- sponsored geothermal development and research projects and geologic data from all 50 states. By making data easily discoverable and accessible this system will open new exploration opportunities and shorten project development. The prototype data system currently includes multiple data nodes, and nationwide data online and available to the public, indexed through a single catalog under construction at http://search.geothermaldata.org. Data from state geological surveys and partners includes more than 5 million records online, including 1.48 million well headers (oil and gas, water, geothermal), 732,000 well logs, and 314,000 borehole temperatures and is growing rapidly. There are over 250 Web services and another 138 WMS (Web Map Services) registered in the system as of August, 2013. Additional data record is being added by companion projects run by Boise State University, Southern Methodist University, and the USGS. The National Renewable Energy Laboratory is managing the Geothermal Data Repository, an NGDS node that will be a clearinghouse for data from hundreds of DOE-funded geothermal projects. NGDS is built on the US Geoscience Information Network (USGIN) data integration framework, which is a joint undertaking of the USGS and the Association of American State Geologists (AASG). NGDS is fully compliant with the White House Executive Order of May 2013, requiring all federal agencies to make their data holdings publicly accessible online in open source, interoperable formats with common core and extensible metadata. The National Geothermal Data System is being designed, built, deployed, and populated primarily with grants from the US Department of Energy, Geothermal Technologies Office. To keep this operational system sustainable after the original implementation will require four core elements: continued serving of data and applications by providers; maintenance of system operations; a governance structure; and an effective business model. Each of these presents a number of challenges currently under consideration.

  18. PNAS Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    EFRC research in atomically precise gold clusters and their magnetism used in collaboration with Molly Stevens Group in Imperial College, London featured in PNAS Article As a part...

  19. Advocate Articles

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Baton Rouge Advocate Articles regarding CAMD (pdf files) Letter: CAMD fund cuts harmful for LSU Our Views: CAMD is on life support Letter: Story disappoints ex-CAMD official CAMD...

  20. article {13463

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    article {13463, title = {Algorithmic Differentiation for Climate Science}, year = {2016}, abstract = {<p>Computing sensitivities of climate-related quantities of interest (QoI) to very high-dimensional state or parameter spaces in an efficient manner is of considerable interest in climate science. Applications in which sensitivities are propagated in time by means of adjoint models include quantifying controlling factors of the QoI\&rsquo;s variations [24, 3], optimal state and

  1. Laminate article

    DOE Patents [OSTI]

    Williams, Robert K.; Paranthaman, Mariappan; Chirayil, Thomas G.; Lee, Dominic F.; Goyal, Amit; Feenstra, Roeland

    2002-01-01

    A laminate article comprises a substrate and a biaxially textured (RE.sub.x A.sub.(1-x)).sub.2 O.sub.2-(x/2) buffer layer over the substrate, wherein 0article can include a layer of YBCO over the (RE.sub.x A.sub.(1-x)).sub.2 O.sub.2-(x/2) buffer layer. A layer of CeO.sub.2 between the YBCO layer and the (RE.sub.x A.sub.(1-x)).sub.2 O.sub.2-(x/2) buffer layer can also be include. Further included can be a layer of YSZ between the CeO.sub.2 layer and the (RE.sub.x A.sub.(1-x)).sub.2 O.sub.2-(x/2) buffer layer. The substrate can be a biaxially textured metal, such as nickel. A method of forming the laminate article is also disclosed.

  2. BRAF CAMD article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    article featured in BRAF Currents fourth quarter report

  3. Related Articles: 2014 Archive

    Broader source: Energy.gov [DOE]

    This page provides links to 2014 articles describing the latest developments in the area of solid-state lighting.

  4. 2009-Present Journal Articles

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2009-Present Journal Articles Explanation of NIF & PS Directorate Related Publications List Default settings: All Years. All Articles. Narrow search: Select year in left column, and/or article type in 1 of 3 pulldowns. Search box: Insert text to further narrow search. Finds matches in Author List, Article Title, and Journal Name. Sort results: Click on "First Author" or "Year" at the top of the display columns. Research Topics ALL Articles Directorate Science Topics ICF,

  5. Method of drying articles

    DOE Patents [OSTI]

    Janney, Mark A. (Knoxville, TN); Kiggans, Jr., James O. (Oak Ridge, TN)

    1999-01-01

    A method of drying a green particulate article includes the steps of: a. Providing a green article which includes a particulate material and a pore phase material, the pore phase material including a solvent; and b. contacting the green article with a liquid desiccant for a period of time sufficient to remove at least a portion of the solvent from the green article, the pore phase material acting as a semipermeable barrier to allow the solvent to be sorbed into the liquid desiccant, the pore phase material substantially preventing the liquid desiccant from entering the pores.

  6. Related Articles: 2015 Archive

    Broader source: Energy.gov [DOE]

    This page provides links to 2015 articles describing the latest developments in the area of solid-state lighting.

  7. Method of drying articles

    DOE Patents [OSTI]

    Janney, M.A.; Kiggans, J.O. Jr.

    1999-03-23

    A method of drying a green particulate article includes the steps of: (a) Providing a green article which includes a particulate material and a pore phase material, the pore phase material including a solvent; and (b) contacting the green article with a liquid desiccant for a period of time sufficient to remove at least a portion of the solvent from the green article, the pore phase material acting as a semipermeable barrier to allow the solvent to be sorbed into the liquid desiccant, the pore phase material substantially preventing the liquid desiccant from entering the pores. 3 figs.

  8. ARM - Facility News Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    will monitor the competition and ensure that the AGU journal is state-of-the-art in terms of science and will work with staff to initiate new features, new article...

  9. ARM - Facility News Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    June 24, 2009 [Facility News] Mobile Facility Deployments Featured in ClimateWire Bookmark and Share Several ARM science team members are quoted in an article published in ClimateWire, an online publication devoted to climate change issues and their effects on business, the environment, and society. The article highlights deployments of the ARM Mobile Facility and its contribution to the overall climate record obtained through the ARM Climate Research Facility. ClimateWire is one of several

  10. ARM - Facility News Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Records Set Again; New Process Enhances Reporting of User Facility Statistics Bookmark and Share The 2006 year-end ARM statistics included a spatial distribution of global (shown...

  11. ARM - Journal Articles 2003

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... ARM Min Photon path length distributions inferred from rotating shadowband spectrometer measurements at the Atmospheric Radiation Measurements Program Southern Great Plains site ...

  12. Recompressed exfoliated graphite articles

    DOE Patents [OSTI]

    Zhamu, Aruna; Shi, Jinjun; Guo, Jiusheng; Jang, Bor Z

    2013-08-06

    This invention provides an electrically conductive, less anisotropic, recompressed exfoliated graphite article comprising a mixture of (a) expanded or exfoliated graphite flakes; and (b) particles of non-expandable graphite or carbon, wherein the non-expandable graphite or carbon particles are in the amount of between about 3% and about 70% by weight based on the total weight of the particles and the expanded graphite flakes combined; wherein the mixture is compressed to form the article having an apparent bulk density of from about 0.1 g/cm.sup.3 to about 2.0 g/cm.sup.3. The article exhibits a thickness-direction conductivity typically greater than 50 S/cm, more typically greater than 100 S/cm, and most typically greater than 200 S/cm. The article, when used in a thin foil or sheet form, can be a useful component in a sheet molding compound plate used as a fuel cell separator or flow field plate. The article may also be used as a current collector for a battery, supercapacitor, or any other electrochemical cell.

  13. ARM - Facility News Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    23, 2007 [Facility News] BAMS Features Three ARM Research Papers in February Bookmark and Share Image of the February 2007 BAMS cover In a tropospheric trifecta, three ARM research papers were featured in the February 2007 issue of the Bulletin of the American Meteorological Society, or BAMS. Two of the articles-Turner et. al., and Comstock et. al.,-cover studies of retrieval algorithms used to characterize the microphysical properties of thin liquid water clouds and upper tropospheric ice

  14. ARM - Journal Articles 2002

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 Publications Journal Articles Conference Documents Program Documents Technical Reports Publications Database Public Information Materials Image Library Videos Publication Resources Submit a Publication Publishing Procedures ARM Style Guide (PDF, 448KB) Acronyms Glossary Logos Contacts RSS for Publications Journal Search [ Advanced Search ] Publication Years 2016 12 2015 177 2014 162 2013 190 2012 168 2011 185 2010 199 2009 216 2008 176 2007 151 2006 214 2005 139 2004 142 2003 187 2002 205 2001

  15. ARM - Journal Articles 2004

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 Publications Journal Articles Conference Documents Program Documents Technical Reports Publications Database Public Information Materials Image Library Videos Publication Resources Submit a Publication Publishing Procedures ARM Style Guide (PDF, 448KB) Acronyms Glossary Logos Contacts RSS for Publications Journal Search [ Advanced Search ] Publication Years 2016 12 2015 177 2014 162 2013 190 2012 168 2011 185 2010 199 2009 216 2008 176 2007 151 2006 214 2005 139 2004 142 2003 187 2002 205 2001

  16. ARM - Journal Articles 2005

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 Publications Journal Articles Conference Documents Program Documents Technical Reports Publications Database Public Information Materials Image Library Videos Publication Resources Submit a Publication Publishing Procedures ARM Style Guide (PDF, 448KB) Acronyms Glossary Logos Contacts RSS for Publications Journal Search [ Advanced Search ] Publication Years 2016 12 2015 177 2014 162 2013 190 2012 168 2011 185 2010 199 2009 216 2008 176 2007 151 2006 214 2005 139 2004 142 2003 187 2002 205 2001

  17. ARM - Journal Articles 2007

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 Publications Journal Articles Conference Documents Program Documents Technical Reports Publications Database Public Information Materials Image Library Videos Publication Resources Submit a Publication Publishing Procedures ARM Style Guide (PDF, 448KB) Acronyms Glossary Logos Contacts RSS for Publications Journal Search [ Advanced Search ] Publication Years 2016 12 2015 177 2014 162 2013 190 2012 168 2011 185 2010 199 2009 216 2008 176 2007 151 2006 214 2005 139 2004 142 2003 187 2002 205 2001

  18. ARM - Journal Articles 2010

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 Publications Journal Articles Conference Documents Program Documents Technical Reports Publications Database Public Information Materials Image Library Videos Publication Resources Submit a Publication Publishing Procedures ARM Style Guide (PDF, 448KB) Acronyms Glossary Logos Contacts RSS for Publications Journal Search [ Advanced Search ] Publication Years 2016 12 2015 177 2014 162 2013 190 2012 168 2011 185 2010 199 2009 216 2008 176 2007 151 2006 214 2005 139 2004 142 2003 187 2002 205 2001

  19. ARM - Journal Articles 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 Publications Journal Articles Conference Documents Program Documents Technical Reports Publications Database Public Information Materials Image Library Videos Publication Resources Submit a Publication Publishing Procedures ARM Style Guide (PDF, 448KB) Acronyms Glossary Logos Contacts RSS for Publications Journal Search [ Advanced Search ] Publication Years 2016 12 2015 177 2014 162 2013 190 2012 168 2011 185 2010 199 2009 216 2008 176 2007 151 2006 214 2005 139 2004 142 2003 187 2002 205 2001

  20. ARM - Journal Articles 2015

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 Publications Journal Articles Conference Documents Program Documents Technical Reports Publications Database Public Information Materials Image Library Videos Publication Resources Submit a Publication Publishing Procedures ARM Style Guide (PDF, 448KB) Acronyms Glossary Logos Contacts RSS for Publications Journal Search [ Advanced Search ] Publication Years 2016 12 2015 177 2014 162 2013 190 2012 168 2011 185 2010 199 2009 216 2008 176 2007 151 2006 214 2005 139 2004 142 2003 187 2002 205 2001

  1. ARM - Publications Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CenterPublicationsPublications Article Media Contact Hanna Goss hanna-dot-goss-at-pnnl-dot-gov @armnewsteam Field Notes Blog Topics Field Notes107 AGU 3 AMIE 10 ARM Aerial Facility 2 ARM Mobile Facility 1 6 ARM Mobile Facility 2 47 ARM Mobile Facility 3 1 BAECC 1 BBOP 4 ENA 1 GOAMAZON 7 MAGIC 15 MC3E 17 PECAN 3 SGP 7 STORMVEX 29 TCAP 3 Search News Search Blog News Center All Categories What's this? Social Media Guidance News Center All Categories Features and Releases Facility News Field Notes

  2. ARM - Facility News Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    August 15, 2004 [Facility News] SuomiNet-type Instruments Tested and Ready for Tropics Bookmark and Share The SuomiNet software integrates a network of global positioning systems to distribute spatially and temporally dense atmospheric data in real-time from broad and diverse regions. ARM Program scientists are concentrating on developing techniques for obtaining the best possible water vapor measurements under a wide range of conditions (clear/cloudy, day/night, etc.). In 2001, 15 SuomiNet

  3. ARM - Facility News Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Multifilter Radiometer Added to Cessna Payload Bookmark and Share Back at the hangar in Ponca City, a multifilter radiometer is positioned inside the Cessna's new starboard wingtip extension. Downward-facing multifilter radiometers (MFR) are instruments used to measure the intensity and distribution of reflected energy from different surfaces, such as grass or dirt. The relative amount of reflected energy-also called "surface spectral albedo"-is important for determining the amount of

  4. ARM - Facility News Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    July 15, 2008 [Facility News] Extract This! Enhanced Visualization Tool Available at the Data Archive Bookmark and Share Custom 2-day plot of downwelling shortwave and longwave radiation made using the enhanced NCVweb feature. Like many scientific organizations, the ARM Data Archive stores and distributes atmospheric data from the ARM sites in Network common data form, or NetCDF. This file format applies names or attributes to the various layers of data for efficient identification and

  5. ARM - Facility News Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    15, 2004 [Facility News] Radiosonde Data Distribution In Place for Modeling During M-PACE Bookmark and Share An M-PACE researcher launches a radiosonde at Oliktok Point. Several launch periods, spanning at least 5 days each with 4 launches per day, are planned for all four experimental sites (Barrow, Oliktok Point, Atqasuk and Toolik Lake). During the Mixed-Phase Arctic Cloud Experiment (M-PACE), taking place in October 2004 at the ARM Climate Research Facility North Slope of Alaska (NSA)

  6. ARM - Facility News Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    July 8, 2014 [Facility News] Studying the Sky-Day and Night Bookmark and Share The Infrared Sky Imager (IRSI) may replace the Total Sky Imager (TSI) for measuring cloud fraction at the SGP. The Infrared Sky Imager (IRSI) may replace the Total Sky Imager (TSI) for measuring cloud fraction at the SGP. Clouds play a critical role in our climate system by reflecting light and heat into space and distributing precipitation. At the ARM Southern Great Plains site, a variety of instruments measure

  7. 2015 ARTICLES | Department of Energy

    Energy Savers [EERE]

    ARTICLES 2015 ARTICLES PDF icon LED Performance Under Tough Conditions PDF icon LED Watch: Where It's Needed, When It's Needed PDF icon LED Watch: A Specifier's Guide to ...

  8. Articles

    U.S. Energy Information Administration (EIA) Indexed Site

    . . . . . . . . . . . . . . . . . . . . . . . . . . December 1993 Distillate Fuel Oil Outlook for Winter 1993-94 . . . . . . . . . . . . . . . . . . . . . . . . . . . November...

  9. Articles

    U.S. Energy Information Administration (EIA) Indexed Site

    . . . . . . . . . . August 1993 The Economics of the Clean Air Act Amendments of 1990: Review of the 1992-1993 Oxygenated Motor Gasoline Season . . . . . . . . . . . . . . . . . ....

  10. Microwave sintering of multiple articles

    DOE Patents [OSTI]

    Blake, Rodger D. (Santa Fe, NM); Katz, Joel D. (Los Alamos, NM)

    1993-01-01

    Apparatus and method for producing articles of alumina and of alumina and silicon carbide in which the articles are sintered at high temperatures using microwave radiation. The articles are placed in a sintering container which is placed in a microwave cavity for heating. The rates at which heating and cooling take place is controlled.

  11. Surface treatment of ceramic articles

    DOE Patents [OSTI]

    Komvopoulos, K.; Brown, I.G.; Wei, B.; Anders, S.; Anders, A.; Bhatia, C.S.

    1998-12-22

    A process is disclosed for producing an article with improved ceramic surface properties including providing an article having a ceramic surface, and placing the article onto a conductive substrate holder in a hermetic enclosure. Thereafter a low pressure ambient is provided in the hermetic enclosure. A plasma including ions of solid materials is produced the ceramic surface of the article being at least partially immersed in a macroparticle free region of the plasma. While the article is immersed in the macroparticle free region, a bias of the substrate holder is biased between a low voltage at which material from the plasma condenses on the surface of the article and a high negative voltage at which ions from the plasma are implanted into the article. 15 figs.

  12. Surface treatment of ceramic articles

    DOE Patents [OSTI]

    Komvopoulos, Kyriakos (Orinda, CA); Brown, Ian G. (Berkeley, CA); Wei, Bo (Daly City, CA); Anders, Simone (Albany, CA); Anders, Andre (Albany, CA); Bhatia, C. Singh (Morgan Hill, CA)

    1998-01-01

    A process for producing an article with improved ceramic surface properties including providing an article having a ceramic surface, and placing the article onto a conductive substrate holder in a hermetic enclosure. Thereafter a low pressure ambient is provided in the hermetic enclosure. A plasma including ions of solid materials is produced the ceramic surface of the article being at least partially immersed in a macroparticle free region of the plasma. While the article is immersed in the macroparticle free region, a bias of the substrate holder is biased between a low voltage at which material from the plasma condenses on the surface of the article and a high negative voltage at which ions from the plasma are implanted into the article.

  13. Articles about Wind Program Analysis

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6301 Articles about Wind Program Analysis en New Report Shows Domestic Offshore Wind Industry Potential, 21 Projects Planned in U.S. Waters http:energy.goveerearticles...

  14. BooNE News Articles

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News Articles FermiNews Fermilab's biweekly magazine (several stories) Beam Line: Special Neutrino Issue A special issue of SLAC's quarterly magazine. Earth & Sky "Catching Ghost...

  15. Related Articles | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Related Articles Related Articles This page provides links to recent articles describing the latest developments in the area of solid-state lighting. DECEMBER 2015 LED Performance Under Tough Conditions James Brodrick, U.S. Department of Energy LD+A Magazine http://www.ies.org/lda/members_contact.cfm OCTOBER 2015 LED Watch: Where It's Needed, When It's Needed James Brodrick, U.S. Department of Energy LD+A Magazine http://www.ies.org/lda/members_contact.cfm AUGUST 2015 LED Watch: A Specifier's

  16. Science & Technology Review Articles

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NIF & Photon Science News Press Releases Experimental Highlights Efficiency Improvements Science & Technology Meetings and Workshops Papers and Presentations NIF&PS People In the News Press Kit S&TR Articles home / news Science & Technology Review Articles Title Year Month Author Description Downoad Developing Lightweight Optics for Space 2013 January Jerry Britten Fabricating a large-aperture transmissive diffractive optic for DARPA's Membrane Optic Imager Real-Time

  17. Open Access to Financing + Solar Hosting

    Broader source: Energy.gov [DOE]

    This presentation summarizes the information given by GridParity Finance during the DOE SunShot Grand Challenge: Summit and Technology Forum, June 13-14, 2012.

  18. Laser and infrared (selected articles)

    SciTech Connect (OSTI)

    Not Available

    1992-01-09

    This article reports the author's impressions from a visit to the U.S. in May, 1989. The report describes the rapid deployment in recent years of solid state laser technology in area of application such as high average power, semiconductor laser device pumps, tunability, narrow line width, and other similar solid state laser device, as well as laser materials processing, and so on.

  19. Siemens SOFC Test Article and Module Design

    SciTech Connect (OSTI)

    2011-03-31

    Preliminary design studies of the 95 kWe-class SOFC test article continue resulting in a stack architecture of that is 1/3 of 250 kWe-class SOFC advanced module. The 95 kWeclass test article is envisioned to house 20 bundles (eight cells per bundle) of Delta8 cells with an active length of 100 cm. Significant progress was made in the conceptual design of the internal recirculation loop. Flow analyses were initiated in order to optimize the bundle row length for the 250 kWeclass advanced module. A preferred stack configuration based on acceptable flow and thermal distributions was identified. Potential module design and analysis issues associated with pressurized operation were identified.

  20. Journal Articles | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Journal Articles Journal of Forensic Sciences Bommarito, C., Sturdevant, A. and D. Szymanski. 2007. Analysis of Forensic Soil Samples via HPLC and IC. Volume 52 (1), pp. 24-30. PDF Langenburg, G. 2009. Testing for Potential Contextual Bias Effects During the Verification Stage of the ACE-V Methodology When Conducting Fingerprint Comparisons. Volume 54 (3), pp. 571-582. PDF Baerncopf, J.M, McGuffin, V.L., and R. Waddell Smith. 2010. Effect of Gas Chromatography Temperature Program on the

  1. Respond to the article | Department of Energy

    Office of Environmental Management (EM)

    Respond to the article Respond to the article April 15, 2014 - 5:30pm Use the form below to submit a question or comment to Ben Dotson about the article LabChat: The Science of...

  2. Respond to the article | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Respond to the article Respond to the article October 5, 2012 - 1:00pm Use the form below to submit a question or comment to Allison Casey about the article October is Energy...

  3. Report Articles | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Report Articles Report Articles The Y-12 Report communicates the significant accomplishments of and events involving the Y-12 National Security Complex and its people. View report...

  4. Distributed Power Inc | Open Energy Information

    Open Energy Info (EERE)

    Distributed Power Inc Place: Lime Rock, Connecticut Zip: 6039 Product: Focused on distributed generation power technology. References: Distributed Power Inc1 This article is a...

  5. Articles Articles

    U.S. Energy Information Administration (EIA) Indexed Site

    . . . . . . . . . . . . . . . . . . . . May 1995 Results of the Office of Oil and Gas "Outlook Survey" . . . . . . . . . . . . . . . . . . . . . . . March 1995 Distillate Fuel Oil...

  6. Method of nitriding refractory metal articles

    DOE Patents [OSTI]

    Tiegs, T.N.; Holcombe, C.E.; Dykes, N.L.; Omatete, O.O.; Young, A.C.

    1994-03-15

    A method of nitriding a refractory-nitride forming metal or metalloid articles and composite articles. A consolidated metal or metalloid article or composite is placed inside a microwave oven and nitrogen containing gas is introduced into the microwave oven. The metal or metalloid article or composite is heated to a temperature sufficient to react the metal or metalloid with the nitrogen by applying a microwave energy within the microwave oven. The metal or metalloid article or composite is maintained at that temperature for a period of time sufficient to convert the article of metal or metalloid or composite to an article or composite of refractory nitride. In addition, a method of applying a coating, such as a coating of an oxide, a carbide, or a carbo-nitride, to an article of metal or metalloid by microwave heating.

  7. Method of nitriding refractory metal articles

    DOE Patents [OSTI]

    Tiegs, Terry N. (Lenoir City, TN); Holcombe, Cressie E. (Knoxville, TN); Dykes, Norman L. (Oak Ridge, TN); Omatete, Ogbemi O. (Lagos, NG); Young, Albert C. (Flushing, NY)

    1994-01-01

    A method of nitriding a refractory-nitride forming metal or metalloid articles and composite articles. A consolidated metal or metalloid article or composite is placed inside a microwave oven and nitrogen containing gas is introduced into the microwave oven. The metal or metalloid article or composite is heated to a temperature sufficient to react the metal or metalloid with the nitrogen by applying a microwave energy within the microwave oven. The metal or metalloid article or composite is maintained at that temperature for a period of time sufficient to convert the article of metal or metalloid or composite to an article or composite of refractory nitride. In addition, a method of applying a coating, such as a coating of an oxide, a carbide, or a carbo-nitride, to an article of metal or metalloid by microwave heating.

  8. Articles about Offshore Wind | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Offshore Wind Articles about Offshore Wind RSS Below are stories about offshore wind featured by the U.S. Department of Energy (DOE) Wind Program. December 7, 2015 Articles about...

  9. Respond to the article | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Matthew Loveless about the article Energy Department Launches Apps for Energy. Your response * Your email (optional) Send message Enter Now!

  10. Respond to the article | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    April Saylor about the article Join Us Wednesday: #AskEnergy with Secretary Chu & Senator Mark Udall

  11. Respond to the article | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Respond to the article Respond to the article May 27, 2015 - 4:05pm Use the form below to submit a question or comment to Christina Stowers about the article Conserving Water, One Drop at a Time. Your response * Your email (optional) Send message

  12. Respond to the article | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Respond to the article Respond to the article May 11, 2015 - 2:52pm Use the form below to submit a question or comment to Paul Lester about the article #AskEnergySaver: Answering Your Fuel Efficiency Questions. Your response * Your email (optional) Send message

  13. Respond to the article | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Respond to the article Respond to the article July 20, 2011 - 9:58am Use the form below to submit a question or comment about the article Our Commitment to Asian American and Pacific Islanders at the Department of Energy. Your response * Your email (optional) Send message

  14. Respond to the article | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Respond to the article Respond to the article December 10, 2012 - 12:43pm Use the form below to submit a question or comment to John Chu about the article Top 10 Tips to Save Energy and Money in the Winter. Your response * Your email (optional) Send message

  15. Respond to the article | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Respond to the article Respond to the article February 27, 2013 - 9:00am Use the form below to submit a question or comment to The Honorable LaDoris G. Harris about the article Today at 2:30 pm ET: Hangout With Science, Tech, and Innovation Leaders . Your response * Your email (optional) Send message

  16. Respond to the article | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Respond to the article Respond to the article March 21, 2013 - 12:00pm Use the form below to submit a question or comment to Rebecca Matulka about the article Home Energy Audits: Making Homes More Energy Efficient and Comfortable. Your response * Your email (optional) Send message

  17. Respond to the article | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Respond to the article Respond to the article April 22, 2013 - 4:57pm Use the form below to submit a question or comment to April Saylor about the article Ask Your Energy Innovation Hub Questions . Your response * Your email (optional) Send message

  18. Respond to the article | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Respond to the article Respond to the article June 20, 2014 - 12:30pm Use the form below to submit a question or comment to Christina Stowers about the article Making the Connection Between Water and Energy. Your response * Your email (optional) Send message

  19. Supplementary information accompanying article %22Porous templated

    Office of Scientific and Technical Information (OSTI)

    pyrolytic carbons as electrocatalyst components%22. (Journal Article) | SciTech Connect Supplementary information accompanying article %22Porous templated pyrolytic carbons as electrocatalyst components%22. Citation Details In-Document Search Title: Supplementary information accompanying article %22Porous templated pyrolytic carbons as electrocatalyst components%22. Abstract not provided. Authors: Coker, Eric Nicholas ; Steen, William A. ; Miller, James E. ; Alam, Todd Michael Publication

  20. Veteran's Buy Back Article | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Veteran's Buy Back Article Veteran's Buy Back Article PDF icon Military Buy Back Article.pdf More Documents & Publications Request for Retirement Annuity Estimates THE EMPLOYEE'S GUIDE TO BENEFITS FOR THOSE AFFECTED BY REDUCTION IN FORCE POLICY GUIDANCE MEMORANDUM #39 Phased Retirement

  1. Firefox Extension Framework for News Article Tagging

    Energy Science and Technology Software Center (OSTI)

    2006-08-08

    FEFNAT is a Firefox extension that is used to collect information about user interests when viewing new articles. When a user is reading a news article on a web-page, he can vote whether the article was interesting or not interesting by clicking the appropriate button on the extension's tool-bar. The purpose of this extension is to collet user interests and behavior while viewing new articles so that it can be used in my research formore » predicting how interesting future news article may be for the user.« less

  2. Method of producing silicon carbide articles

    DOE Patents [OSTI]

    Milewski, John V. (Los Alamos, NM)

    1985-01-01

    A method of producing articles comprising reaction-bonded silicon carbide (SiC) and graphite (and/or carbon) is given. The process converts the graphite (and/or carbon) in situ to SiC, thus providing the capability of economically obtaining articles made up wholly or partially of SiC having any size and shape in which graphite (and/or carbon) can be found or made. When the produced articles are made of an inner graphite (and/or carbon) substrate to which SiC is reaction bonded, these articles distinguish SiC-coated graphite articles found in the prior art by the feature of a strong bond having a gradual (as opposed to a sharply defined) interface which extends over a distance of mils. A method for forming SiC whisker-reinforced ceramic matrices is also given. The whisker-reinforced articles comprise SiC whiskers which substantially retain their structural integrity.

  3. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit (Knoxville, TN); Williams, Robert K. (Knoxville, TN)

    2001-01-01

    A biaxially textured alloy article comprises Ni powder and at least one powder selected from the group consisting of Cr, W, V, Mo, Cu, Al, Ce, YSZ, Y, Rare Earths, (RE), MgO, CeO.sub.2, and Y.sub.2 O.sub.3 ; compacted and heat treated, then rapidly recrystallized to produce a biaxial texture on the article. In some embodiments the alloy article further comprises electromagnetic or electro-optical devices and possesses superconducting properties.

  4. Articles about Offshore Wind | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Offshore Wind Articles about Offshore Wind RSS Below are stories about offshore wind featured by the U.S. Department of Energy (DOE) Wind Program. December 7, 2015 Articles about Offshore Wind Wind Measurement Buoy Advances Offshore Wind Energy A next-generation buoy will provide unprecedented information on offshore wind patterns, making it possible to harness wind power in entirely new locations. October 27, 2015 Articles about Offshore Wind Innovative Study Helps Offshore Wind Developers

  5. Respond to the article | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3, 2014 - 12:11pm Use the form below to submit a question or comment to Allison Casey about the article EnergyFaceoff Rounds Begin...

  6. Article 29 Employee Awards | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cash Award. PDF icon Article 29 Employee Awards Responsible Contacts Lorrenda Buckner HUMAN RESOURCES SPECIALIST (PERFORMANCE MANAGEMENT) E-mail lorrenda.buckner@hq.doe.go...

  7. Atypical Glycolysis in Clostridium thermocellum (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    Resource Type: Journal Article Resource Relation: Journal Name: Applied and Environmental Microbiology; Journal Volume: 79; Journal Issue: 9 Research Org: BioEnergy Science Center ...

  8. Nuclear Scission and Quantum Localization (Journal Article) ...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Nuclear Scission and Quantum Localization Citation Details In-Document Search Title: Nuclear Scission and Quantum Localization You are accessing a document from...

  9. Biaxially textured articles formed by power metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2003-08-26

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  10. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2004-09-14

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  11. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2003-08-26

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  12. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2004-09-28

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  13. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2005-01-25

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  14. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2003-08-05

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of ternary mixtures consisting of: Ni powder, Cu powder, and Al powder, Ni powder, Cr powder, and Al powder; Ni powder, W powder and Al powder; Ni powder, V powder, and Al powder; Ni powder, Mo powder, and Al powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  15. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2003-07-29

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  16. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goval, Amit; Williams, Robert K.; Kroeger, Donald M.

    2005-06-07

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  17. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2003-08-19

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  18. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2005-05-10

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  19. Articles about Environmental Impacts and Siting | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Articles about Environmental Impacts and Siting Wind Measurement Buoy Advances Offshore Wind Energy A next-generation buoy will provide unprecedented information on offshore wind...

  20. Respond to the article | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1, 2014 - 12:37pm Use the form below to submit a question or comment to Paige Terlip about the article Harnessing Solar Energy

  1. Space propulsion: The antimatter advantage (Journal Article)...

    Office of Scientific and Technical Information (OSTI)

    OSTI Identifier: 5657366 Resource Type: Journal Article Resource Relation: Journal Name: IEEE Aerospace and Electronic Systems Magazine (Institute of Electrical and Electronics ...

  2. Articles about Education Outreach | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Education Outreach Articles about Education Outreach RSS Below are stories about education and outreach featured by the U.S. Department of Energy (DOE) Wind Program. October 1,...

  3. Research Challenges for Visualization Software. (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Research Challenges for Visualization Software. Citation Details In-Document Search Title: Research Challenges for Visualization Software. Authors: Moreland,...

  4. Respond to the article | Department of Energy

    Office of Environmental Management (EM)

    the article Tips: Home Office and Electronics. Your response * Your email (optional) Send message Contact Us E-mail: Webmaster Online: Facebook iconconnecttwitter.png Twitter...

  5. Respond to the article | Department of Energy

    Office of Environmental Management (EM)

    submit a question or comment to Paige Terlip about the article Everything You Wanted to Know About Solar Water Heating Systems. Your response * Your email (optional) Send message...

  6. Parallel ptychographic reconstruction (Journal Article) | DOE...

    Office of Scientific and Technical Information (OSTI)

    OSTI Identifier: 1222306 GrantContract Number: FC02-06ER25777 Type: Published Article Journal Name: Optics Express Additional Journal Information: Journal Volume: 22; Journal ...

  7. Entanglement purification with double selection (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    Publication Date: 2009-10-15 OSTI Identifier: 21316361 Resource Type: Journal Article Resource Relation: Journal Name: Physical Review. A; Journal Volume: 80; Journal Issue: 4; ...

  8. Science Magazine Articles | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science Magazine Articles "Second Bid for Brain Observatory," by Emily Underwood Science, ... bold proposal: the creation of a National Brain Observatory, a network of neurotechnology ...

  9. Method for fabricating boron carbide articles

    DOE Patents [OSTI]

    Ardary, Zane L. (Oak Ridge, TN); Reynolds, Carl D. (Clinton, TN)

    1980-01-01

    The present invention is directed to the fabrication of boron carbide articles having length-to-diameter or width ratios greater than 2 to 1. The process of the present invention is practiced by the steps comprising hot pressing boron carbide powder into article segments or portions in which the segments have a length-to-diameter or width ratio less than 1.5, aligning a plurality of the initially hot-pressed segments in a hot-pressing die with the end surfaces of the segments placed in intimate contact with one another, and then hot pressing the aligned segments into an article of the desired configuration. The resulting article exhibits essentially uniform density throughout the structure with the bonds between the segments being equivalent in hardness, strength, and density to the remainder of the article.

  10. Production of super-smooth articles

    DOE Patents [OSTI]

    Duchane, David V. (Los Alamos, NM)

    1983-01-01

    Super-smooth rounded or formed articles made of thermoplastic materials including various poly(methyl methacrylate) or acrylonitrile-butadiene-styrene copolymers are produced by immersing the articles into a bath, the composition of which is slowly changed with time. The starting composition of the bath is made up of at least one solvent for the polymer and a diluent made up of at least one nonsolvent for the polymer and optional materials which are soluble in the bath. The resulting extremely smooth articles are useful as mandrels for laser fusion and should be useful for a wide variety of other purposes, for example lenses.

  11. Article 29 Employee Awards | Department of Energy

    Energy Savers [EERE]

    Article 29 Employee Awards Article 29 Employee Awards This award is available to all-employees in the Performance Management System whose annual summary rating-of-record is "Meets Expectation" (ME) or higher, udess the employee has been rated at "Needs Improvement" or below on any critical element. All employees rated at or above this level will be nominated for a Performance-Based Cash Award. PDF icon Article 29 Employee Awards Responsible Contacts Lorrenda Buckner HUMAN

  12. Torsional texturing of superconducting oxide composite articles

    DOE Patents [OSTI]

    Christopherson, Craig John (Grafton, MA); Riley, Jr., Gilbert N. (Marlborough, MA); Scudiere, John (Bolton, MA)

    2002-01-01

    A method of texturing a multifilamentary article having filaments comprising a desired oxide superconductor or its precursors by torsionally deforming the article is provided. The texturing is induced by applying a torsional strain which is at least about 0.3 and preferably at least about 0.6 at the surface of the article, but less than the strain which would cause failure of the composite. High performance multifilamentary superconducting composite articles having a plurality of low aspect ratio, twisted filaments with substantially uniform twist pitches in the range of about 1.00 inch to 0.01 inch (25 to 0.25 mm), each comprising a textured desired superconducting oxide material, may be obtained using this texturing method. If tighter twist pitches are desired, the article may be heat treated or annealed and the strain repeated as many times as necessary to obtain the desired twist pitch. It is preferred that the total strain applied per step should be sufficient to provide a twist pitch tighter than 5 times the diameter of the article, and twist pitches in the range of 1 to 5 times the diameter of the article are most preferred. The process may be used to make a high performance multifilamentary superconducting article, having a plurality of twisted filaments, wherein the degree of texturing varies substantially in proportion to the radial distance from the center of the article cross-section, and is substantially radially homogeneous at any given cross-section of the article. Round wires and other low aspect ratio multifilamentary articles are preferred forms. The invention is not dependent on the melting characteristics of the desired superconducting oxide. Desired oxide superconductors or precursors with micaceous or semi-micaceous structures are preferred. When used in connection with desired superconducting oxides which melt irreversibly, it provides multifilamentary articles that exhibit high DC performance characteristics and AC performance markedly superior to any currently available for these materials. In a preferred embodiment, the desired superconducting oxide material is BSCCO 2223.

  13. Respond to the article | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    October 22, 2014 - 2:18pm Use the form below to submit a question or comment to Christina Stowers about the article Going Off the Grid with Solar...

  14. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2003-10-21

    A strengthened, biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed, compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: Ni, Ag, Ag--Cu, Ag--Pd, Ni--Cu, Ni--V, Ni--Mo, Ni--Al, Ni--Cr--Al, Ni--W--Al, Ni--V--Al, Ni--Mo--Al, Ni--Cu--Al; and at least one fine metal oxide powder; the article having a grain size which is fine and homogeneous; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  15. PART ONE INTRODUCTION ARTICLE I. JURISDICTION

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3- PART ONE INTRODUCTION ARTICLE I. JURISDICTION 1. The U.S. Environmental Protection Agency (EPA), Region 10, enters into this Agreement pursuant to Section 120(e) of the...

  16. Respond to the article | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    September 3, 2014 - 12:34pm Use the form below to submit a question or comment to Paige Terlip about the article Energy Saving Do-It-Yourself Projects Just Got Easier

  17. Respond to the article | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    October 17, 2014 - 9:45am Use the form below to submit a question or comment to Paige Terlip about the article Using Passive Solar Design to Save Money and Energy

  18. Respond to the article | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Use the form below to submit a question or comment to Rebecca Matulka about the article Hangout with Clean Cities on Thursday, June 20, at 2:30 pm ET. Your response * Your email (optional) Send message

  19. Respond to the article | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    March 15, 2012 - 3:26pm Use the form below to submit a question or comment to Gloria B. Smith about the article Got Questions about Women in Science, Tech, Engineering, or Math ...

  20. Respond to the article | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    0, 2012 - 2:16pm Use the form below to submit a question or comment to Rebecca Matulka about the article Navigating the New EnergySaver.gov

  1. Respond to the article | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    19, 2013 - 11:03am Use the form below to submit a question or comment to Alex Cohen about the article Submit Your Ideas for the NY Energy Data Jam

  2. Respond to the article | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4, 2013 - 10:50am Use the form below to submit a question or comment to Patricia A. Hoffman about the article Smart Grid Week: R&D Projects Paving the Way to the 21st Century Grid

  3. Respond to the article | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3, 2014 - 12:37pm Use the form below to submit a question or comment to Paige Terlip about the article So You Want to Go Solar? 3 Things to Consider When Installing Solar Power

  4. Respond to the article | Department of Energy

    Office of Environmental Management (EM)

    April 16, 2012 - 5:51pm Use the form below to submit a question or comment to Amanda Scott about the article Celebrate Earth Day with Secretary Chu...

  5. Respond to the article | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4, 2014 - 10:20am Use the form below to submit a question or comment to Paige Terlip about the article Computer vs. Video Game System: Ready to Rumble in the EnergyFaceoff Jungle...

  6. Respond to the article | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    23, 2014 - 1:30pm Use the form below to submit a question or comment to Elizabeth Spencer about the article Know Your Energy Bill. Your response * Your email (optional) Send...

  7. Respond to the article | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the form below to submit a question or comment to Rebecca Matulka about the article AskEnergy: Join the Live Q&A on Wind Energy. Your response * Your email (optional) Send message...

  8. Respond to the article | Department of Energy

    Energy Savers [EERE]

    form below to submit a question or comment to Erin R. Pierce about the article askEnergy: Live Twitter Chat with A Solar Expert. Your response * Your email (optional) Send message...

  9. Science Magazine Articles | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science Magazine Articles "Second Bid for Brain Observatory," by Emily Underwood Science, 350, 6259, 365-366 (Oct. 23, 2015) (DOI: 10.1126science.350.6259.365 ) Summary Reprint...

  10. Respond to the article | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to submit a question or comment to Rebecca Matulka about the article askEnergy: Live Twitter Chat with Home Energy Efficiency Experts. Your response * Your email (optional) Send...

  11. Method of producing microchannel and nanochannel articles

    DOE Patents [OSTI]

    D'Urso, Brian R.

    2010-05-04

    A method of making an article having channels therethrough includes the steps of: providing a ductile structure defining at least one macro-channel, the macro-channel containing a salt; drawing the ductile structure in the axial direction of the at least one macro-channel to reduce diameter of the macro-channel; and contacting the salt with a solvent to dissolve the salt to produce an article having at least one microchannel.

  12. Biaxially textured articles formed by plastic deformation

    DOE Patents [OSTI]

    Goyal, Amit (Knoxville, TN)

    2001-01-01

    A method of preparing a biaxially textured article comprises the steps of providing a metal preform, coating or laminating the preform with a metal layer, deforming the layer to a sufficient degree, and rapidly recrystallizing the layer to produce a biaxial texture. A superconducting epitaxial layer may then be deposited on the biaxial texture. In some embodiments the article further comprises buffer layers, electromagnetic devices or electro-optical devices.

  13. Related Articles: 2009 Archive | Department of Energy

    Energy Savers [EERE]

    9 Archive Related Articles: 2009 Archive This page provides links to 2009 articles describing the latest developments in the area of solid-state lighting. Some of the following documents are available as Adobe Acrobat PDFs. December 2009 The Status of Solid-State Lighting Today James Brodrick, U.S. Department of Energy Electrical Construction & Maintenance Magazine http://www.ecmweb.com Lifetime Concerns James Brodrick, U.S. Department of Energy LD+A Magazine

  14. Related Articles: 2013 Archive | Department of Energy

    Energy Savers [EERE]

    3 Archive Related Articles: 2013 Archive This page provides links to 2013 articles describing the latest developments in the area of solid-state lighting. December 2013 Lumen Maintenance and Light Loss Factors: Consequences of Current Design Practices for LEDs Michael Royer, Pacific Northwest National Laboratory LEUKOS: The Journal of the Illuminating Engineering Society of North America http://www.ies.org/leukos/introduction.cfm LED Watch: Color Stability Is Still a Question James Brodrick,

  15. US Solar Distributing | Open Energy Information

    Open Energy Info (EERE)

    Distributing Place: California Product: California-based distributor of PV modules, inverters, mounting systems and accessories. References: US Solar Distributing1 This article...

  16. Method for hot press forming articles

    DOE Patents [OSTI]

    Baker, Robert R. (Livonia, MI); Hartsock, Dale L. (Livonia, MI)

    1982-01-01

    This disclosure relates to an improved method for achieving the best bond strength and for minimizing distortion and cracking of hot pressed articles. In particular, in a method for hot press forming both an outer facing circumferential surface of and an inner portion of a hub, and of bonding that so-formed outer facing circumferential surface to an inner facing circumferential surface of a pre-formed ring thereby to form an article, the following improvement is made. Normally, in this method, the outside ring is restrained by a restraining sleeve of ring-shaped cross-section having an inside diameter. A die member, used to hot press form the hub, is so-formed as to have an outside diameter sized to engage the inside diameter of the restraining sleeve in a manner permitting relative movement therebetween. The improved method is one in which several pairs of matched restraining sleeve and die member are formed with each matched pair having a predetermined diameter. The predetermined diameter of each matched pair is different from another matched pair by stepped increments. The largest inside diameter of a restraining sleeve is equal to the diameter of the outer facing circumferential surface of the hub. Each pair of the matched restraining sleeve and die member is used to form an article in which an inside hub is bonded to an outside ring. The several samples so-formed are evaluated to determine which sample has the best bond formed between the hub and the ring with the least or no cracking or distortion in the ring portion of the article. Thereafter, the matched restraining sleeve and die member which form the article having the best bonding characteristics and least distortion cracking is then used for repeated formations of articles.

  17. Symmetric generalized binomial distributions

    SciTech Connect (OSTI)

    Bergeron, H.; Curado, E. M. F.; Instituto Nacional de Ciência e Tecnologia - Sistemas Complexos, Rua Xavier Sigaud 150, 22290-180 - Rio de Janeiro, RJ ; Gazeau, J. P.; APC, UMR 7164, Univ Paris Diderot, Sorbonne Paris Cité, 75205 Paris ; Rodrigues, Ligia M. C. S. E-mail: evaldo@cbpf.br E-mail: ligia@cbpf.br

    2013-12-15

    In two recent articles, we have examined a generalization of the binomial distribution associated with a sequence of positive numbers, involving asymmetric expressions of probabilities that break the symmetry win-loss. We present in this article another generalization (always associated with a sequence of positive numbers) that preserves the symmetry win-loss. This approach is also based on generating functions and presents constraints of non-negativeness, similar to those encountered in our previous articles.

  18. Low density, microcellular foams, preparation, and articles

    DOE Patents [OSTI]

    Young, A.T.

    1982-03-03

    A microcellular low-density foam of poly(4-methyl-1-pentene) particularly useful for forming targets for inertial confinement fusion has been developed. Articles made from the foam have been machined to tolerances of 0.0001 inch, although the densities of the fragile foam are low (about 10 to about 100 mg/cc) and the cell sizes are small (about 10 to about 30 ..mu..m). Methods for forming the foam and articles are given. The yield strength of the foam of the invention is higher than was obtained in other structures of this same material.

  19. Low density, microcellular foams, preparation, and articles

    DOE Patents [OSTI]

    Young, Ainslie T. (Los Alamos, NM); Marsters, Robert G. (Jemez Springs, NM); Moreno, Dawn K. (Espanola, NM)

    1984-01-01

    A microcellular low density foam of poly(4-methyl-1-pentene) which is particularly useful for forming targets for inertial confinement fusion has been developed. Articles made from the foam have been machined to tolerances of 0.0001 inch, although the densities of the fragile foam are low (about 10 to about 100 mg/cc) and the cell sizes are small (about 10 to about 30 .mu.m). Methods for forming the foam and articles are given; and the yield strength of the foam of the invention is higher than was obtained in other structures of this same material.

  20. Fluid casting of particle-based articles

    DOE Patents [OSTI]

    Menchhofer, Paul (Oak Ridge, TN)

    1995-01-01

    A method for the production of articles made of a particle-based material; e.g., ceramics and sintered metals. In accordance with one aspect of the invention, a thermally settable slurry containing a relatively high concentration of the particles is introduced into an immiscible, heated fluid. The slurry sets or hardens into a shape determined by the physical characteristics of the fluid and the manner of introduction of the slurry into the fluid. For example, the slurry is pulse injected into the fluid to provide spherical articles. The hardened spheres may then be sintered to consolidate the particles and provide a high density product.

  1. Laser production of articles from powders

    DOE Patents [OSTI]

    Lewis, G.K.; Milewski, J.O.; Cremers, D.A.; Nemec, R.B.; Barbe, M.R.

    1998-11-17

    Method and apparatus for forming articles from materials in particulate form in which the materials are melted by a laser beam and deposited at points along a tool path to form an article of the desired shape and dimensions. Preferably the tool path and other parameters of the deposition process are established using computer-aided design and manufacturing techniques. A controller comprised of a digital computer directs movement of a deposition zone along the tool path and provides control signals to adjust apparatus functions, such as the speed at which a deposition head which delivers the laser beam and powder to the deposition zone moves along the tool path. 20 figs.

  2. Laser production of articles from powders

    DOE Patents [OSTI]

    Lewis, Gary K. (Los Alamos, NM); Milewski, John O. (Santa Fe, NM); Cremers, David A. (Los Alamos, NM); Nemec, Ronald B. (White Rock, NM); Barbe, Michael R. (White Rock, NM)

    1998-01-01

    Method and apparatus for forming articles from materials in particulate form in which the materials are melted by a laser beam and deposited at points along a tool path to form an article of the desired shape and dimensions. Preferably the tool path and other parameters of the deposition process are established using computer-aided design and manufacturing techniques. A controller comprised of a digital computer directs movement of a deposition zone along the tool path and provides control signals to adjust apparatus functions, such as the speed at which a deposition head which delivers the laser beam and powder to the deposition zone moves along the tool path.

  3. Related Articles: 2007 Archive | Department of Energy

    Energy Savers [EERE]

    7 Archive Related Articles: 2007 Archive This page provides links to 2007 articles describing the latest developments in the area of solid-state lighting. Some of the following documents are available as Adobe Acrobat PDFs. December 2007 Testing 1,2 (PDF 578 KB) James Brodrick, U.S. Department of Energy LD+A Magazine http://www.ies.org/lda/members_contact.cfm November 2007 LED Watch: LED Downlights (PDF 260 KB) James Brodrick, U.S. Department of Energy LD+A Magazine

  4. Related Articles: 2008 Archive | Department of Energy

    Energy Savers [EERE]

    8 Archive Related Articles: 2008 Archive This page provides links to 2008 articles describing the latest developments in the area of solid-state lighting. Some of the following documents are available as Adobe Acrobat PDFs. December 2008 LED Lighting Works Well in Recessed Cans, Undercabinet Lighting Lauren Heist, Residential Lighting Magazine www.residentiallighting.com LED Watch: All Eyes on I-35 James Brodrick, U.S. Department of Energy LD+A Magazine http://www.ies.org/lda/members_contact.cfm

  5. Related Articles: 2010 Archive | Department of Energy

    Energy Savers [EERE]

    0 Archive Related Articles: 2010 Archive This page provides links to 2010 articles describing the latest developments in the area of solid-state lighting. Some of the following documents are available as Adobe Acrobat PDFs. December 2010 LED Watch: The Standards Wave Rolls On James Brodrick, U.S. Department of Energy LD+A Magazine http://www.ies.org/lda/members_contact.cfm October 2010 LED Replacement Lamps: Getting Ready for a Game-Changing Decade James Brodrick, U.S. Department of Energy NEMA

  6. Related Articles: 2011 Archive | Department of Energy

    Energy Savers [EERE]

    1 Archive Related Articles: 2011 Archive This page provides links to 2011 articles describing the latest developments in the area of solid-state lighting. December 2011 LED Watch: A Rising Tide Lifts All Boats James Brodrick, U.S. Department of Energy LD+A Magazine http://www.ies.org/lda/members_contact.cfm October 2011 LED Watch: Standards Update: The Question of Lifetime James Brodrick, U.S. Department of Energy LD+A Magazine http://www.ies.org/lda/members_contact.cfm August 2011 LED Watch: A

  7. Related Articles: 2012 Archive | Department of Energy

    Energy Savers [EERE]

    2 Archive Related Articles: 2012 Archive This page provides links to 2012 articles describing the latest developments in the area of solid-state lighting. December 2012 LED Watch: Making Progress Is Standard Procedure for SSL James Brodrick, U.S. Department of Energy LD+A Magazine http://www.ies.org/lda/members_contact.cfm October 2012 LED Watch: A Small Footprint-and Getting Smaller James Brodrick, U.S. Department of Energy LD+A Magazine http://www.ies.org/lda/members_contact.cfm August 2012 A

  8. Topological confinement and superconductivity (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    Report Number(s): LA-UR-08-05469; LA-UR-08-5469 Journal ID: ISSN 0031-9007; PRLTAO; TRN: US201006%%1245 DOE Contract Number: AC52-06NA25396 Resource Type: Journal Article Resource ...

  9. Articles about Testing | Department of Energy

    Office of Environmental Management (EM)

    Testing Articles about Testing RSS Below are stories about testing facilities, capabilities, and certification featured by the U.S. Department of Energy (DOE) Wind Program. September 17, 2015 Statistics Show Bearing Problems Cause the Majority of Wind Turbine Gearbox Failures In the past, the wind energy industry has been relatively conservative in terms of data sharing, especially with the general public, which has inhibited the research community's efforts to identify and mitigate the

  10. Effective Lagrangian for Nonrelativistic Systems (Journal Article) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Effective Lagrangian for Nonrelativistic Systems Citation Details In-Document Search Title: Effective Lagrangian for Nonrelativistic Systems Authors: Watanabe, Haruki ; Murayama, Hitoshi Publication Date: 2014-09-29 OSTI Identifier: 1180179 Grant/Contract Number: AC03-76SF00098 Type: Published Article Journal Name: Physical Review X Additional Journal Information: Journal Volume: 4; Journal Issue: 3; Journal ID: ISSN 2160-3308 Publisher: American Physical Society Sponsoring

  11. Celebrating Einstein A Series of Articles

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A Series of Articles "Albert Einstein is undoubtedly one of the most fascinating and influential figures of the modern era. As a preeminent physicist, he radically transformed our understanding of the universe." - Edited excerpt from Albert Einstein, Albert Einstein Archives, The Hebrew University of Jerusalem In this series about Albert EinsteinÂ’s body of work, his discoveries are related to todayÂ’s research, technology, and common knowledge. Series themes include "How did

  12. ARM - Feature Stories and Releases Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    February 25, 2015 [Facility News, Feature Stories and Releases] Nature Article: Carbon Dioxide's Greenhouse Effect at Earth's Surface Confirmed Using ARM Data Bookmark and Share Researchers link rising carbon dioxide levels from fossil fuels to an upward trend in radiative forcing at two locations From 2000 to the end of 2010, 3300 measurements were obtained at ARM's North Slope of Alaska site for the study. From 2000 to the end of 2010, 3300 measurements were obtained at ARM's North Slope of

  13. ARM - Feature Stories and Releases Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Scientists Find Mostly Liquid Particulates over Amazon Rainforest Bookmark and Share Nature Geoscience article shows atmospheric organic particulate matter can be liquid as well as solid A scanning cloud radar was one of the instruments taking measurements during GoAmazon 2014/2015. A scanning cloud radar was one of the instruments taking measurements during GoAmazon 2014/2015. When scientists participating in the GoAmazon 2014/2015 experiment measured the physical state of aerosols drifting

  14. Articles about Education Outreach | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Education Outreach Articles about Education Outreach RSS Below are stories about education and outreach featured by the U.S. Department of Energy (DOE) Wind Program. September 15, 2015 Collegiate Wind Competition 2015 participants and judges at the National Wind Technology Center at the National Renewable Energy Laboratory. <em>Photo by Lee Jay Fingersh</em> Boise State University Places First in DOE's Collegiate Wind Competition 2015 Seven teams of students from universities across

  15. Articles about Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing Articles about Manufacturing RSS Below are stories about manufacturing featured by the U.S. Department of Energy (DOE) Wind Program. September 17, 2015 Statistics Show Bearing Problems Cause the Majority of Wind Turbine Gearbox Failures In the past, the wind energy industry has been relatively conservative in terms of data sharing, especially with the general public, which has inhibited the research community's efforts to identify and mitigate the premature failures of wind turbine

  16. Articles about Market Transformation | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Market Transformation Articles about Market Transformation RSS Below are stories about market transformation featured by the U.S. Department of Energy (DOE) Wind Program. September 29, 2015 New Report Shows Domestic Offshore Wind Industry Potential, 21 Projects Planned in U.S. Waters The Energy Department today released a new report showing strong progress for the U.S. offshore wind market-including the start of construction of the nation's first commercial-scale offshore wind farm, one of 21

  17. Articles about Testing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Testing Articles about Testing RSS Below are stories about testing facilities, capabilities, and certification featured by the U.S. Department of Energy (DOE) Wind Program. September 17, 2015 Statistics Show Bearing Problems Cause the Majority of Wind Turbine Gearbox Failures In the past, the wind energy industry has been relatively conservative in terms of data sharing, especially with the general public, which has inhibited the research community's efforts to identify and mitigate the

  18. Laminate articles on biaxially textured metal substrates

    DOE Patents [OSTI]

    Beach, David B.; Morrell, Jonathan S.; Paranthaman, Mariappan; Chirayil, Thomas; Specht, Eliot D.; Goyal, Amit

    2003-12-16

    A laminate article comprises a substrate and a biaxially textured (RE.sup.1.sub.x RE.sup.2.sub.(1-x)).sub.2 O.sub.3 buffer layer over the substrate, wherein 0article can include a layer of YBCO over the (RE.sup.1.sub.x RE.sup.2.sub.(1-x)).sub.2 O.sub.3 buffer layer. A layer of CeO.sub.2 between the YBCO layer and the (RE.sup.1.sub.x RE.sup.2.sub.(1-x)).sub.2 O.sub.3 buffer can also be include. Further included can be a layer of YSZ between the CeO.sub.2 layer and the (R.sup.1.sub.x RE.sup.2.sub.(1-x)).sub.2 O.sub.3 buffer layer. The substrate can be a biaxially textured metal, such as nickel. A method of forming the laminate article is also disclosed.

  19. Article separation apparatus and method for unit operations

    DOE Patents [OSTI]

    Pardini, Allan F.; Gervais, Kevin L.; Mathews, Royce A.; Hockey, Ronald L.

    2010-06-22

    An apparatus and method are disclosed for separating articles from a group of articles. The apparatus includes a container for containing one or more articles coupled to a suitable fluidizer for suspending articles within the container and transporting articles to an induction tube. A portal in the induction tube introduces articles singly into the induction tube. A vacuum pulls articles through the induction tube separating the articles from the group of articles in the container. The apparatus and method can be combined with one or more unit operations or modules, e.g., for inspecting articles, assessing quality of articles, or ascertaining material properties and/or parameters of articles, including layers thereof.

  20. Category:Articles where citations are needed | Open Energy Information

    Open Energy Info (EERE)

    Articles where citations are needed Jump to: navigation, search This is the Articles where citations are needed category. Pages in category "Articles where citations are needed"...

  1. Silicon carbide fibers and articles including same

    DOE Patents [OSTI]

    Garnier, John E; Griffith, George W

    2015-01-27

    Methods of producing silicon carbide fibers. The method comprises reacting a continuous carbon fiber material and a silicon-containing gas in a reaction chamber at a temperature ranging from approximately 1500.degree. C. to approximately 2000.degree. C. A partial pressure of oxygen in the reaction chamber is maintained at less than approximately 1.01.times.10.sup.2 Pascal to produce continuous alpha silicon carbide fibers. Continuous alpha silicon carbide fibers and articles formed from the continuous alpha silicon carbide fibers are also disclosed.

  2. Buffer layers and articles for electronic devices

    DOE Patents [OSTI]

    Paranthaman, Mariappan P.; Aytug, Tolga; Christen, David K.; Feenstra, Roeland; Goyal, Amit

    2004-07-20

    Materials for depositing buffer layers on biaxially textured and untextured metallic and metal oxide substrates for use in the manufacture of superconducting and other electronic articles comprise RMnO.sub.3, R.sub.1-x A.sub.x MnO.sub.3, and combinations thereof; wherein R includes an element selected from the group consisting of La, Ce, Pr, Nd, Pm, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, and Y, and A includes an element selected from the group consisting of Be, Mg, Ca, Sr, Ba, and Ra.

  3. Articles about Wind Siting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Wind Siting Articles about Wind Siting RSS Below are stories about siting featured by the U.S. Department of Energy (DOE) Wind Program. September 29, 2015 New Report Shows Domestic Offshore Wind Industry Potential, 21 Projects Planned in U.S. Waters The Energy Department today released a new report showing strong progress for the U.S. offshore wind market-including the start of construction of the nation's first commercial-scale offshore wind farm, one of 21 projects totaling 15,650 megawatts

  4. ARM - Feature Stories and Releases Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3, 2012 [Feature Stories and Releases] SGP Site Staff Share Successes, Challenges in the Name of Science Bookmark and Share Large-scale observation network in Korea opens door to new collaborations Daniel Hartsock and Dr. Kyungjeen Park look on as Pat Dowell describes the operation of a disdrometer at the SGP site. A sensor under the instrument's 'hood' measures rain rate and drop size distribution. Daniel Hartsock and Dr. Kyungjeen Park look on as Pat Dowell describes the operation of a

  5. Process of producing a ceramic matrix composite article and article formed thereby

    DOE Patents [OSTI]

    Corman, Gregory Scot (Ballston Lake, NY); McGuigan, Henry Charles (Duanesburg, NY); Brun, Milivoj Konstantin (Ballston Lake, NY)

    2011-10-25

    A CMC article and process for producing the article to have a layer on its surface that protects a reinforcement material within the article from damage. The method entails providing a body containing a ceramic reinforcement material in a matrix material that contains a precursor of a ceramic matrix material. A fraction of the reinforcement material is present and possibly exposed at a surface of the body. The body surface is then provided with a surface layer formed of a slurry containing a particulate material but lacking the reinforcement material of the body. The body and surface layer are heated to form the article by converting the precursor within the body to form the ceramic matrix material in which the reinforcement material is contained, and by converting the surface layer to form the protective layer that covers any fraction of the reinforcement material exposed at the body surface.

  6. Process of producing a ceramic matrix composite article and article formed thereby

    DOE Patents [OSTI]

    Corman, Gregory Scot; McGuigan, Henry Charles; Brun, Milivoj Konstantin

    2010-05-04

    A CMC article and process for producing the article to have a layer on its surface that protects a reinforcement material within the article from damage. The method entails providing a body containing a ceramic reinforcement material in a matrix material that contains a precursor of a ceramic matrix material. A fraction of the reinforcement material is present and possibly exposed at a surface of the body. The body surface is then provided with a surface layer formed of a slurry containing a particulate material but lacking the reinforcement material of the body. The body and surface layer are heated to form the article by converting the precursor within the body to form the ceramic matrix material in which the reinforcement material is contained, and by converting the surface layer to form the protective layer that covers any fraction of the reinforcement material exposed at the body surface.

  7. Article coated with flash bonded superhydrophobic particles

    DOE Patents [OSTI]

    Simpson, John T (Clinton, TN) [Clinton, TN; Blue, Craig A (Knoxville, TN) [Knoxville, TN; Kiggans, Jr., James O [Oak Ridge, TN

    2010-07-13

    A method of making article having a superhydrophobic surface includes: providing a solid body defining at least one surface; applying to the surface a plurality of diatomaceous earth particles and/or particles characterized by particle sizes ranging from at least 100 nm to about 10 .mu.m, the particles being further characterized by a plurality of nanopores, wherein at least some of the nanopores provide flow through porosity, the particles being further characterized by a plurality of spaced apart nanostructured features that include a contiguous, protrusive material; flash bonding the particles to the surface so that the particles are adherently bonded to the surface; and applying a hydrophobic coating layer to the surface and the particles so that the hydrophobic coating layer conforms to the nanostructured features.

  8. Method of forming an HTS article

    DOE Patents [OSTI]

    Bhattacharya, Raghu N.; Zhang, Xun; Selvamanickam, Venkat

    2014-08-19

    A method of forming a superconducting article includes providing a substrate tape, forming a superconducting layer overlying the substrate tape, and depositing a capping layer overlying the superconducting layer. The capping layer includes a noble metal and has a thickness not greater than about 1.0 micron. The method further includes electrodepositing a stabilizer layer overlying the capping layer using a solution that is non-reactive to the superconducting layer. The superconducting layer has an as-formed critical current I.sub.C(AF) and a post-stabilized critical current I.sub.C(PS). The I.sub.C(PS) is at least about 95% of the I.sub.C(AF).

  9. Coated foams, preparation, uses and articles

    DOE Patents [OSTI]

    Duchane, D.V.; Barthell, B.L.

    1982-10-21

    Hydrophobic cellular material is coated with a thin hydrophilic polymer skin which stretches tightly over the foam but which does not fill the cells of the foam, thus resulting in a polymer-coated foam structure having a smoothness which was not possible in the prior art. In particular, when the hydrophobic cellular material is a specially chosen hydrophobic polymer foam and is formed into arbitrarily chosen shapes prior to the coating with hydrophilic polymer, inertial confinement fusion (ICF) targets of arbitrary shapes can be produced by subsequently coating the shapes with metal or with any other suitable material. New articles of manufacture are produced, including improved ICF targets, improved integrated circuits, and improved solar reflectors and solar collectors. In the coating method, the cell size of the hydrophobic cellular material, the viscosity of the polymer solution used to coat, and the surface tension of the polymer solution used to coat are all very important to the coating.

  10. SC e-journals, Open Access Journals by Publisher

    Office of Scientific and Technical Information (OSTI)

    ... Living Reviews in Relativity (1998 forward) - OAJ American Physical ... (2008 forward) - OAJ Journal of Environmental and Public Health (2009 forward) - OAJ Journal of ...

  11. Method For Manufacturing Articles For High Temperature Use, And Articles Made Therewith

    DOE Patents [OSTI]

    Wang, Hongyu (Hockessin, DE); Mitchell, David Joseph (Niskayuna, NY); Lau, Yuk-Chiu (Ballston Lake, NY); Henry, Arnold Thomas (Gloversville, NY)

    2006-02-28

    A method for manufacturing an article for use in a high-temperature environment, and an article for use in such an environment, are presented. The method comprises providing a substrate; selecting a desired vertical crack density for a protective coating to be deposited on the substrate; providing a powder, wherein the powder has a size range selected to provide a coating having the desired vertical crack density; and applying a thermal-sprayed coating to the substrate, the coating having the desired vertical crack density, wherein the powder is used as a raw material for the coating.

  12. Method For Manufacturing Articles For High Temperature Use, And Articles Made Therewith

    DOE Patents [OSTI]

    Wang, Hongyu (Hockessin, DE); Mitchell, David Joseph (Niskayuna, NY); Lau, Yuk-Chiu (Ballston Lake, NY); Henry, Arnold Thomas (Gloversville, NY)

    2005-03-15

    A method for manufacturing an article for use in a high-temperature environment, and an article for use in such an environment, are presented. The method comprises providing a substrate; selecting a desired vertical crack density for a protective coating to be deposited on the substrate; providing a powder, wherein the powder has a size range selected to provide a coating having the desired vertical crack density; and applying a thermal-sprayed coating to the substrate, the coating having the desired vertical crack density, wherein the powder is used as a raw material for the coating.

  13. Article IX, Section 8 of Idaho's Constitution | Open Energy Informatio...

    Open Energy Info (EERE)

    Article IX, Section 8 of Idaho's ConstitutionLegal Abstract This article outlines the education and school lands requirements. Published NA Year Signed or Took Effect 1890 Legal...

  14. Category:Articles with incomplete citations | Open Energy Information

    Open Energy Info (EERE)

    Articles with incomplete citations Jump to: navigation, search This is the Articles with incomplete citations category. This category currently contains no pages or media....

  15. Unitarity check in gravitational Higgs mechanism (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Unitarity check in gravitational Higgs mechanism Citation Details ... OSTI Identifier: 21537616 Resource Type: Journal Article Resource Relation: Journal Name: ...

  16. Beam Loading by Distributed Injection of Electrons in a Plasma...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Beam Loading by Distributed Injection of Electrons in a Plasma Wakefield Accelerator Citation Details In-Document Search Title: Beam Loading by Distributed...

  17. EIS Distribution

    Broader source: Energy.gov [DOE]

    This DOE guidance presents a series of recommendations related to the EIS distribution process, which includes creating and updating a distribution list, distributing an EIS, and filing an EIS with the EPA.

  18. Sample Employee Newsletter Articles for Plug-In Electric Vehicle...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    These sample articles on plug-in electric vehicles (PEVs) can be customized and used in your employee newsletters, blog or intranet. Use these articles as-is with a credit to the ...

  19. Articles from Our Historian | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Articles from Our Historian Articles from Our Historian Ray Smith Y-12 Historian Click a ... by The Oak Ridger, Y-12 Historian D. Ray Smith provides richly detailed stories about ...

  20. Y-12 Bulletin Uranium Articles | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Bulletin Uranium ... Y-12 Bulletin Uranium Articles Posted: July 22, 2013 - 3:13pm | Y-12 Report | Volume 10, Issue 1 | 2013 These and other articles can be found in archived...

  1. Shining Light on Opacity (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Shining Light on Opacity Citation Details In-Document Search Title: ... DOE Contract Number: DE-AC52-07NA27344 Resource Type: Journal Article Resource Relation: ...

  2. Voltage-Gated Hydrophobic Nanopores (Journal Article) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Voltage-Gated Hydrophobic Nanopores Citation Details In-Document Search ... DOE Contract Number: DE-AC05-00OR22725 Resource Type: Journal Article Resource Relation: ...

  3. The majorana experiment (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Journal Article: The majorana experiment Citation Details In-Document Search Title: The ... DOE Contract Number: AC52-06NA25396 Resource Type: Journal Article Research Org: Los ...

  4. Controlled laser production of elongated articles from particulates

    DOE Patents [OSTI]

    Dixon, Raymond D. (Los Alamos, NM); Lewis, Gary K. (Los Alamos, NM); Milewski, John O. (Santa Fe, NM)

    2002-01-01

    It has been discovered that wires and small diameter rods can be produced using laser deposition technology in a novel way. An elongated article such as a wire or rod is constructed by melting and depositing particulate material into a deposition zone which has been designed to yield the desired article shape and dimensions. The article is withdrawn from the deposition zone as it is formed, thus enabling formation of the article in a continuous process. Alternatively, the deposition zone is moved along any of numerous deposition paths away from the article being formed.

  5. Method of producing novel silicon carbide articles. [Patent application

    DOE Patents [OSTI]

    Milewski, J.V.

    1982-06-18

    A method of producing articles comprising reaction-bonded silicon carbide (SiC) and graphite (and/or carbon) is given. The process converts the graphite (and/or carbon) in situ to SiC, thus providing the capability of economically obtaining articles made up wholly or partially of SiC having any size and shape in which graphite (and/or carbon) can be found or made. When the produced articles are made of an inner graphite (and/or carbon) substrate to which SiC is reaction bonded, these articles distinguish SiC-coated graphite articles found in the prior art by the feature of a strong bond having a gradual (as opposed to a sharply defined) interface which extends over a distance of mils. A method for forming SiC whisker-reinforced ceramic matrices is also given. The whisker-reinforced articles comprise SiC whiskers which substantially retain their structural integrity.

  6. BN Bonded BN fiber article and method of manufacture

    DOE Patents [OSTI]

    Hamilton, Robert S. (Youngstown, NY)

    1981-08-18

    A boron nitride bonded boron nitride fiber article and the method for its manufacture which comprises forming a shaped article with a composition comprising a bonding compound selected from boron oxide and boric acid and a structural fiber selected from the group consisting of boron oxide, boron nitride and partially nitrided boron oxide fibers, heating the composition in an anhydrous gas to a temperature above the melting point of the compound and nitriding the resulting article in ammonia gas.

  7. Method for fabricating uranium alloy articles without shape memory effects

    DOE Patents [OSTI]

    Banker, J.G.

    1980-05-21

    Uranium-rich niobium and niobium-zirconium alloys possess a characteristic known as shape memory effect wherein shaped articles of these alloys recover their original shape when heated. The present invention circumvents this memory behavior by forming the alloys into the desired configuration at elevated temperatures with cold matched dies and maintaining the shaped articles between the dies until the articles cool to ambient temperature.

  8. Method for fabricating uranium alloy articles without shape memory effects

    DOE Patents [OSTI]

    Banker, John G.

    1985-01-01

    Uranium-rich niobium and niobium-zirconium alloys possess a characteristic known as shape memory effect wherein shaped articles of these alloys recover their original shape when heated. The present invention circumvents this memory behavior by forming the alloys into the desired configuration at elevated temperatures with "cold" matched dies and maintaining the shaped articles between the dies until the articles cool to ambient temperature.

  9. One in five online scholarly articles affected by 'reference rot'

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Scholarly articles affected by 'reference rot' One in five online scholarly articles affected by 'reference rot' Los Alamos authors focus on reference rot, the combination of link rot and content drift to which references to web resources included in STM articles are subject. January 26, 2015 From left, Los Alamos National Laboratory authors Lyudmila Balakireva, Herbert Van De Sompel and Harihar Shankar, and Martin Klein and Robert Sanderson (on computer screens). Their work was published in the

  10. LANL physicists discuss electrical grid in journal article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Physicists discuss electrical grid in journal article LANL physicists discuss electrical grid in journal article Scott Backhaus and Michael Chertkov are authors of an article for Physics Today that outlines the physics of several phenomena associated with power grid behavior. October 17, 2013 High voltage transmission lines carry electrical power. High voltage transmission lines carry electrical power. Calling upon their physics experience, Backhaus and Chertkov present an overview of grid

  11. LANL physicists discuss electrical grid in journal article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Physicists discuss electrical grid in journal article LANL physicists discuss electrical grid in journal article Scott Backhaus and Michael Chertkov are authors of an article for Physics Today that outlines the physics of several phenomena associated with power grid behavior. October 17, 2013 High voltage transmission lines carry electrical power. High voltage transmission lines carry electrical power. Calling upon their physics experience, Backhaus and Chertkov present an overview of grid

  12. Energy.gov Article Guidance | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy.gov Article Guidance Energy.gov Article Guidance Principals and program offices are enthusiastically encouraged to submit content for consideration for Energy.gov's blog and our official social media channels. The following guidance document covers process and strategy for submitting successful contributions. PDF icon Energy.gov Article Guidance More Documents & Publications Web Coordinator Meetings-October 2015 Web Improvement Strategy EERE Annual Website Reports

  13. Multi-layer articles and methods of making same

    DOE Patents [OSTI]

    Fritzemeier, Leslie G.; Zhang, Wei; Palm, Walter C.; Rupich, Martin W.

    2005-05-17

    The invention relates to superconductor articles, and compositions and methods for making superconductor articles. The methods can include using a precursor solution having a relatively small concentration of total free acid. The articles can include more than one layer of superconductor material in which at least one layer of superconductor material can be formed by a solution process, such as a solution process involving the use of metalorganic precursors.

  14. Article: OpenStudio Measures | Department of Energy

    Office of Environmental Management (EM)

    Article: OpenStudio Measures Article: OpenStudio Measures This article discusses a scripting facility called Measures for the OpenStudio software development kit. The article was published in the journal Energy and Buildings in September 2015. The OpenStudio software development kit has played a significant role in the adoption of the EnergyPlus whole building energy modeling engine and in the development and launch of new applications that use EnergyPlus for a variety of purposes. One of the

  15. Articles about Next-Generation Technologies | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    27, 2015 Articles about Next-Generation Technologies Innovative Study Helps Offshore Wind Developers Protect Wildlife The Biodiversity Research Institute's (BRI) new report on a...

  16. Branching Mechanisms in Surfactant Micellar Growth (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    Resource Type: Journal Article Resource Relation: Journal Name: Journal of Physical Chemistry B, na, na, March 14, 2013, pp. 2898 Research Org: Lawrence Livermore National...

  17. Taming Serendipity (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    AC02-98CH10886 Resource Type: Journal Article Resource Relation: Journal Name: Physics World; Journal Volume: 24; Related Information: CES partners with Brookhaven National...

  18. The road to sustainability (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Journal Article: The road to sustainability Citation Details In-Document Search Title: The road to sustainability You are accessing a document from the Department of Energy's...

  19. Towards a Holographic Marginal Fermi Liquid (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    DOE Contract Number: AC02-76SF00515 Resource Type: Journal Article Resource Relation: Journal Name: Submitted to Physical Review D Research Org: SLAC National Accelerator...

  20. Top Better Buildings Beat Articles for February | Department of Energy

    Energy Savers [EERE]

    Top Better Buildings Beat Articles for February Top Better Buildings Beat Articles for February March 4, 2016 - 9:54am Addthis Top Better Buildings Beat Articles for February By Monica Kanojia You want a rundown of the Better Buildings Beat blog's commercial sector-relevant, and we've got them. Check out February's list of Beat articles to get caught up on the progress being made by Better Buildings Partners in the market toward breaking various barriers to energy efficiency. Florida Better

  1. Self-contained Kondo effect in single molecules (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    Resource Type: Journal Article Resource Relation: Journal Name: Physical Review ... Subject: 37 INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL CHEMISTRY; 75 CONDENSED MATTER PHYSICS, ...

  2. Ordered Nanoparticle Catalysts article is an Energy Focus > Archived...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ordered Nanoparticle Catalysts article is an Energy Focus January 24th, 2013 A Nature Materials paper on ordered nanoparticle catalysts has been highlighted as an "Energy...

  3. Sandia Energy - Thermal Pulses for Boeing Test Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Thermal Pulses for Boeing Test Article Home Renewable Energy Energy Partnership News EC Concentrating Solar Power Solar National Solar Thermal Test Facility Thermal Pulses for...

  4. Trapping penguins with entangled B mesons (Journal Article) ...

    Office of Scientific and Technical Information (OSTI)

    GrantContract Number: FG02-96ER40989 Type: Published Article Journal Name: Physics Letters. Section B Additional Journal Information: Journal Volume: 754; Journal Issue: C;...

  5. 2 CCR State Lands Commission Article 1, General Provisions |...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: 2 CCR State Lands Commission Article 1, General ProvisionsLegal Abstract California...

  6. Dechirper Wakefields for Short Bunches (Journal Article) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Dechirper Wakefields for Short Bunches Citation Details In-Document Search Title: Dechirper Wakefields for Short Bunches Authors: Bane, Karl ; Stupakov, Gennady ;...

  7. Dechirper Wakefields for Short Bunches (Journal Article) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Dechirper Wakefields for Short Bunches Citation Details In-Document Search Title: Dechirper Wakefields for Short Bunches You are accessing a document from the...

  8. Charm Production by Neutrinos (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Charm Production by Neutrinos Citation Details In-Document Search Title: Charm Production by Neutrinos You are accessing a document from the Department of...

  9. Achievements of structural genomics (Journal Article) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Achievements of structural genomics Citation Details In-Document Search Title: Achievements of structural genomics You are accessing a document from the...

  10. Annual Users Meeting (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Annual Users Meeting Citation Details In-Document Search Title: Annual Users Meeting Authors: Gustafson, Richard Publication Date: 1982-01-01 OSTI Identifier:...

  11. Nucleon-nucleon scattering in a harmonic potential (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Nucleon-nucleon scattering in a harmonic potential Citation Details In-Document Search Title: Nucleon-nucleon scattering in a harmonic potential Authors: Luu, T ;...

  12. Poly-silicon based latching RF MEMS switch. (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    Resource Type: Journal Article Resource Relation: Journal Name: Proposed for publication in IEEE Microwave and Wireless Component Letters. Research Org: Sandia National ...

  13. Visualization Dot Com (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    DOE Contract Number: AC03-76SF00098 Resource Type: Journal Article Resource Relation: Journal Name: IEEE Computer Graphics and Applications; Journal Volume: 20; Journal Issue: 3; ...

  14. Tools for the Microbiome: Nano and Beyond (Journal Article) ...

    Office of Scientific and Technical Information (OSTI)

    Published Article: Tools for the Microbiome: Nano and Beyond Title: Tools for the Microbiome: Nano and Beyond Authors: Biteen, Julie S. ; Blainey, Paul C. ; Cardon, Zoe G. ; Chun, ...

  15. Freeform Fluidics (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    OSTI Identifier: 1092199 DOE Contract Number: DE-AC05-00OR22725 Resource Type: Journal Article Resource Relation: Journal Name: International Journal of Fluid Power;...

  16. Freeform Fluidics (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    OSTI Identifier: 1104793 DOE Contract Number: DE-AC05-00OR22725 Resource Type: Journal Article Resource Relation: Journal Name: Dynamic Systems, Measurement and Controls;...

  17. Vectorizing the Community Land Model (CLM) (Journal Article)...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Vectorizing the Community Land Model (CLM) Citation Details In-Document Search Title: Vectorizing the Community Land Model (CLM) In this paper we describe our...

  18. Totem results (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    di Pisa (Italy) Publication Date: 2015-04-10 OSTI Identifier: 22391348 Resource Type: Journal Article Resource Relation: Journal Name: AIP Conference Proceedings; Journal Volume:...

  19. Mechanical Bond-Induced Radical Stabilization (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    2013-01-09 OSTI Identifier: 1105671 DOE Contract Number: SC0000989 Resource Type: Journal Article Resource Relation: Journal Name: Journal of the American Chemical Society;...

  20. Casimir Forces On A Silicon Micromechanical Chip (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Casimir Forces On A Silicon Micromechanical Chip Citation Details In-Document Search Title: Casimir Forces On A Silicon Micromechanical Chip Quantum fluctuations ...

  1. PART FIVE COMMON PROVISIONS ARTICLE XXIX. RECOVERY OF STATE...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    COMMON PROVISIONS ARTICLE XXIX. RECOVERY OF STATE COSTS 99. DOE agrees to reimburse Ecology for all of its costs related to the implementation of this Agreement as provided...

  2. One in five online scholarly articles affected by 'reference...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    One in five online scholarly articles affected by 'reference rot' Alumni Link: Opportunities, News and Resources for Former Employees Latest Issue:September 2015 all issues All...

  3. Mini-Guidance Articles from Lessons Learned Quarterly Reports...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    with the Office of General Counsel, the DOE NEPA Community, and others. The mini-guidance articles were developed to address problems identified in the course of preparing,...

  4. Fundamentals of XAFS (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Fundamentals of XAFS Citation Details In-Document Search Title: Fundamentals of XAFS Authors: Newville, M. 1 + Show Author Affiliations (UC) Publication Date: ...

  5. Dasymetric Modeling and Uncertainty (Journal Article) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Dasymetric Modeling and Uncertainty Citation Details In-Document Search Title: Dasymetric Modeling and Uncertainty Authors: Nagle, Nicholas N 1 ; Buttenfield, ...

  6. Dirac neutrino dark matter (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Publication Date: 2008-01-15 OSTI Identifier: 22137754 Resource Type: Journal Article Resource Relation: Journal Name: Journal of Cosmology and Astroparticle Physics; Journal ...

  7. Virtual photon fragmentation functions (Journal Article) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    OSTI Identifier: 40277406 DOE Contract Number: FG02-87ER40731 Resource Type: Journal Article Resource Relation: Journal Name: Physical Review D; Journal Volume: 64; Journal Issue: ...

  8. The Enriched Xenon Observatory (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Publication Date: 2009-12-17 OSTI Identifier: 21325784 Resource Type: Journal Article Resource Relation: Journal Name: AIP Conference Proceedings; Journal Volume: 1182; Journal ...

  9. Outer sphere hydrogenation catalysis (Journal Article) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    OSTI Identifier: 1080563 DOE Contract Number: SC0001055 Resource Type: Journal Article Resource Relation: Journal Name: New J. Chem.; Journal Volume: 37; Related Information: CETM ...

  10. Self-contained Kondo effect in single molecules (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Self-contained Kondo effect in single molecules Citation Details ... OSTI Identifier: 877620 Report Number(s): LBNL--57492 Journal ID: ISSN 0031-9007; PRLTAO; ...

  11. Charged Pion Photoproduction (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Publication Date: 2009-12-17 OSTI Identifier: 21325764 Resource Type: Journal Article Resource Relation: Journal Name: AIP Conference Proceedings; Journal Volume: 1182; Journal ...

  12. Unitarity check in gravitational Higgs mechanism (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    Publication Date: 2011-03-15 OSTI Identifier: 21537616 Resource Type: Journal Article Resource Relation: Journal Name: Physical Review. D, Particles Fields; Journal Volume: 83; ...

  13. THERMAL PROCESSES GOVERNING HOT-JUPITER RADII (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    Publication Date: 2013-07-20 OSTI Identifier: 22121845 Resource Type: Journal Article Resource Relation: Journal Name: Astrophysical Journal; Journal Volume: 772; Journal Issue: 1; ...

  14. Sandia Energy - CRF Article Chosen by The Journal of Chemical...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CRF Article Chosen by The Journal of Chemical Physics to Commemorate 80th Anniversary Home Energy Transportation Energy CRF Facilities News News & Events Sensors & Optical...

  15. Journal articles published by Ames Laboratory interns | The Ames...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in linear nanopores: Hydrodynamic versus stochastic behavior," The Journal of Chemical Physics, Volune 134, Issue 11, 17 March 2011, Articles, Theoretical Methods and...

  16. Running Coulomb potential and Lamb shift in QCD (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    Authors: Hoang, Andre H. ; Manohar, Aneesh V. ; Stewart, Iain W. Publication Date: 2001-07-01 OSTI Identifier: 40204494 Resource Type: Journal Article Resource Relation: Journal ...

  17. Articles about Wind Program Funding | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    funding featured by the U.S. Department of Energy (DOE) Wind Program. October 1, 2015 Articles about Wind Program Funding Energy Department Helps Manufacturers of Small and...

  18. Microwave sintering of single plate-shaped articles

    DOE Patents [OSTI]

    Katz, J.D.; Blake, R.D.

    1995-07-11

    Apparatus and method are disclosed for high temperature sintering of plate-shaped articles of alumina, magnesia, silica, yttria, zirconia, and mixtures thereof using microwave radiation. An article is placed within a sintering structure located within a sintering container which is placed in a microwave cavity for heating. The rates at which heating and cooling take place is controlled. 2 figs.

  19. EIA responds to Nature article on shale gas projections

    Reports and Publications (EIA)

    2014-01-01

    EIA has responded to a December 4, 2014 Nature article on projections of shale gas production made by EIA and by the Bureau of Economic Geology of the University of Texas at Austin (BEG/UT) with a letter to the editors of Nature. BEG/UT has also responded to the article in their own letter to the editor.

  20. Method for making radioactive metal articles having small dimensions

    DOE Patents [OSTI]

    Ohriner, Evan K. (Knoxville, TN)

    2000-01-01

    A method for making a radioactive article such as wire, includes the steps of providing a metal article having a first shape, such a cylinder, that is either radioactive itself or can be converted to a second, radioactive isotope by irradiation; melting the metal article one or more times; optionally adding an alloying metal to the molten metal in order to enhance ductility or other properties; placing the metal article having the first shape (e.g., cylindrical) into a cavity in the interior of an extrusion body (e.g., a cylinder having a cylindrical cavity therein); extruding the extrusion body and the article having the first shape located in the cavity therein, resulting in an elongated extrusion body and an article having a second shape; removing the elongated extrusion body, for example by chemical means, leaving the elongated inner article substantially intact; optionally repeating the extrusion procedure one or more times; and then drawing the elongated article to still further elongate it, into wire, foil, or another desired shape. If the starting metal is enriched in a radioactive isotope or a precursor thereof, the end product can provide a more intense radiation source than conventionally manufactured radioactive wire, foil, or the like.

  1. High temperature ceramic articles having corrosion resistant coating

    DOE Patents [OSTI]

    Stinton, David P. (Knoxville, TN); Lee, Woo Y. (Knoxville, TN)

    1997-01-01

    A ceramic article which includes a porous body of SiC fibers, Si.sub.3 N.sub.4 fibers, SiC coated fibers or Si.sub.3 N.sub.4 coated fibers, having at least one surface, the article having a coating of AlN adherently disposed throughout at least a portion of the porous body.

  2. Microwave sintering of single plate-shaped articles

    DOE Patents [OSTI]

    Katz, Joel D. (Los Alamos, NM); Blake, Rodger D. (Tucson, AZ)

    1995-01-01

    Apparatus and method for high temperature sintering of plate-shaped articles of alumina, magnesia, silica, yttria, zirconia, and mixtures thereof using microwave radiation. An article is placed within a sintering structure located within a sintering container which is placed in a microwave cavity for heating. The rates at which heating and cooling take place is controlled.

  3. Distribution Workshop

    Broader source: Energy.gov [DOE]

    On September 24-26, 2012, the GTT presented a workshop on grid integration on the distribution system at the Sheraton Crystal City near Washington, DC.

  4. Feedback" An Article for Smart Grid News The Smart Grid Transition-Getting Started

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sharing Smart Grid Experiences through Performance Feedback" An Article for Smart Grid News The Smart Grid Transition-Getting Started We are on the ground floor of a Smart Grid transition that is leading us out of a centralized, information- limited infrastructure into an intelligent, modernized electric system. Simply put, our aim is to achieve a smarter grid, one that is merged with ubiquitous information and communication technologies that support a balance of centralized and distributed

  5. Method for removal of beryllium contamination from an article

    DOE Patents [OSTI]

    Simandl, Ronald F.; Hollenbeck, Scott M.

    2012-12-25

    A method of removal of beryllium contamination from an article is disclosed. The method typically involves dissolving polyisobutylene in a solvent such as hexane to form a tackifier solution, soaking the substrate in the tackifier to produce a preform, and then drying the preform to produce the cleaning medium. The cleaning media are typically used dry, without any liquid cleaning agent to rub the surface of the article and remove the beryllium contamination below a non-detect level. In some embodiments no detectible residue is transferred from the cleaning wipe to the article as a result of the cleaning process.

  6. Method for forming biaxially textured articles by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit (Knoxville, TN); Williams, Robert K. (Knoxville, TN); Kroeger, Donald M. (Knoxville, TN)

    2002-01-01

    A method of preparing a biaxially textured alloy article comprises the steps of preparing a mixture comprising Ni powder and at least one powder selected from the group consisting of Cr, W, V, Mo, Cu, Al, Ce, YSZ, Y, Rare Earths, (RE), MgO, CeO.sub.2, and Y.sub.2 O.sub.3 ; compacting the mixture, followed by heat treating and rapidly recrystallizing to produce a biaxial texture on the article. In some embodiments the alloy article further comprises electromagnetic or electro-optical devices and possesses superconducting properties.

  7. New Article on Cybersecurity Discusses DOE's Partnership with the Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sector to Keep the Grid Reliable and Secure | Department of Energy Article on Cybersecurity Discusses DOE's Partnership with the Energy Sector to Keep the Grid Reliable and Secure New Article on Cybersecurity Discusses DOE's Partnership with the Energy Sector to Keep the Grid Reliable and Secure October 6, 2014 - 1:57pm Addthis A new article by OE's Carol Hawk and Akhlesh Kaushiva in The Electricity Journal discusses cybersecurity for the power grid and how DOE and the energy sector are

  8. Chapter 19 NMSA Article 7 | Open Energy Information

    Open Energy Info (EERE)

    to library Legal Document- StatuteStatute: Chapter 19 NMSA Article 7Legal Published NA Year Signed or Took Effect 1978 Legal Citation N.M. Stat. Ann. Art. 19-7 (1978) DOI...

  9. Chapter 19 NMSA Article 13 | Open Energy Information

    Open Energy Info (EERE)

    to library Legal Document- StatuteStatute: Chapter 19 NMSA Article 13Legal Published NA Year Signed or Took Effect 1978 Legal Citation N.M. Stat. Ann. Art. 19-13 (1978) DOI...

  10. Article Published on LED Lumen Maintenance and Light Loss Factors

    Broader source: Energy.gov [DOE]

    An article has been published in LEUKOS: The Journal of the Illuminating Engineering Society of North America (IES) that may be of interest to the solid-state lighting community. Entitled "Lumen...

  11. Gravity Duals of Lifshitz-Like Fixed Points (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    DOE Contract Number: AC02-76SF00515 Resource Type: Journal Article Resource Relation: Journal Name: Phys.Rev.D78:106005,2008 Research Org: Stanford Linear Accelerator Center...

  12. Articles about Next-Generation Technologies | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Next-Generation Technologies Articles about Next-Generation Technologies RSS Below are stories about next-generation technologies featured by the U.S. Department of Energy (DOE)...

  13. Plant Functional Types and Earth System Models (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    DE-AC05-00OR22725 Resource Type: Journal Article Resource Relation: Journal Name: Annals of Botany; Journal Volume: 114; Journal Issue: 1 Research Org: Oak Ridge National...

  14. New Pinning Strategies for Second-Generation Wires (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    DOE Contract Number: DE-AC02-98CH10886 Resource Type: Journal Article Resource Relation: Journal Name: IEEE Transactions on Medical Imaging; Journal Volume: 23; Journal Issue: 3 ...

  15. Annual Users Meeting (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Annual Users Meeting Citation Details In-Document Search Title: Annual Users Meeting You are accessing a document from the Department of Energy's (DOE) SciTech...

  16. Upper Bound on the First Star Formation History (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    Date: 2014-11-20 OSTI Identifier: 1165908 Report Number(s): SLAC-PUB-16151 Journal ID: ISSN 2041--8205 DOE Contract Number: AC02-76SF00515 Resource Type: Journal Article Resource...

  17. Article Published on LED Lumen Maintenance and Light Loss Factors...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    January 20, 2014 - 12:00am Addthis An article has been published in LEUKOS: The Journal of the Illuminating Engineering Society of North America (IES) that may be of...

  18. The Intermediate Higgs (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    SLAC-PUB-11111 hep-ph0504252 DOE Contract Number: AC02-76SF00515 Resource Type: Journal Article Resource Relation: Journal Name: JHEP 0508:074,2005 Research Org: Stanford...

  19. Equation of state in ( 2 + 1 )-flavor QCD (Journal Article) ...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Equation of state in ( 2 + 1 )-flavor QCD Citation Details In-Document Search Title: Equation of state in ( 2 + 1 )-flavor QCD Authors: Bazavov, A. ; Bhattacharya,...

  20. Process and apparatus for casting multiple silicon wafer articles

    DOE Patents [OSTI]

    Nanis, Leonard (Palo Alto, CA)

    1992-05-05

    Method and apparatus of casting silicon produced by the reaction between SiF.sub.4 and an alkaline earth metal into thin wafer-shaped articles suitable for solar cell fabrication.

  1. One in five online scholarly articles affected by 'reference...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    content drift to which references to web resources included in STM articles are subject. ... "For more than 70 percent of papers that link to web pages, revisiting the originally ...

  2. PART THREE REMEDIAL AND CORRECTIVE ACTIONS ARTICLE XIII. FINDINGS...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    paragraphs of this Article constitute a summary of the facts upon which EPA and Ecology are proceeding for purposes of Part Three of this Agreement. None of the facts...

  3. PART FOUR INTEGRATION OF EPA AND ECOLOGY RESPONSIBILITIES ARTICLE...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    49- PART FOUR INTEGRATION OF EPA AND ECOLOGY RESPONSIBILITIES ARTICLE XXIII. RCRACERCLA INTERFACE 86. Part Two of this Agreement requires DOE to carry out RCRA TSD work under the...

  4. New Article on Cybersecurity Discusses DOE's Partnership with...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    October 6, 2014 - 1:57pm Addthis A new article by OE's Carol Hawk and Akhlesh Kaushiva in The Electricity Journal discusses cybersecurity for the power grid and how DOE and the ...

  5. Out of bounds additive manufacturing (Journal Article) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Out of bounds additive manufacturing Citation Details In-Document Search ... GrantContract Number: AC05-00OR22725 Type: Accepted Manuscript Journal Name: Advanced ...

  6. Holographic Gauge Mediation (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Report Number(s): SLAC-PUB-13500 Journal ID: ISSN 1126-6708; arXiv:0903.0619; TRN: US1000592 DOE Contract Number: AC02-76SF00515 Resource Type: Journal Article Resource Relation: ...

  7. The Community Climate System Model Version 4 (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    OSTI Identifier: 1029045 Report Number(s): PNNL-SA-74968 Journal ID: ISSN 0894-8755; JLCLEL; TRN: US201122%%676 DOE Contract Number: AC05-76RL01830 Resource Type: Journal Article ...

  8. Migration mechanisms of oxygen interstitial cluste (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    Report Number(s): INLJOU-13-29349 DOE Contract Number: DE-AC07-05ID14517 Resource Type: Journal Article Resource Relation: Journal Name: Journal of Physics: Condensed Matter; ...

  9. Ionic liquid pretreatment (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Ionic liquid pretreatment Citation Details In-Document Search Title: ... OSTI Identifier: 1048939 Report Number(s): LBNL-5001E Journal ID: ISSN 0360-7275; CEPRA8; ...

  10. Article Published on LED Lumen Maintenance and Light Loss Factors

    Broader source: Energy.gov [DOE]

    An article has been published in LEUKOS: The Journal of the Illuminating Engineering Society of North America (IES) that may be of interest to the solid-state lighting community. Entitled "Lumen Maintenance and Light Loss Factors: Consequences of Current Design Practices for LEDs," the article was written by Michael Royer of Pacific Northwest National Laboratory and discusses complications related to the lamp lumen depreciation (LLD) light loss factor and LEDs.

  11. High temperature ceramic articles having corrosion resistant coating

    DOE Patents [OSTI]

    Stinton, D.P.; Lee, W.Y.

    1997-09-30

    A ceramic article is disclosed which includes a porous body of SiC fibers, Si{sub 3}N{sub 4} fibers, SiC coated fibers or Si{sub 3}N{sub 4} coated fibers, having at least one surface, the article having a coating of AlN adherently disposed throughout at least a portion of the porous body. 1 fig.

  12. Nuclear Scission and Quantum Localization (Journal Article) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect Journal Article: Nuclear Scission and Quantum Localization Citation Details In-Document Search Title: Nuclear Scission and Quantum Localization Authors: Younes, W ; Gogny, D Publication Date: 2011-03-09 OSTI Identifier: 1183533 Report Number(s): LLNL-JRNL-473099 DOE Contract Number: DE-AC52-07NA27344 Resource Type: Journal Article Resource Relation: Journal Name: Physical Review Letters, vol. 107, no. 13, September 21, 2011, pp. 132501-1 to -5 Research Org: Lawrence Livermore

  13. Beyond Mean-Field Calculation For Pairing Correlation (Journal Article) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Journal Article: Beyond Mean-Field Calculation For Pairing Correlation Citation Details In-Document Search Title: Beyond Mean-Field Calculation For Pairing Correlation Authors: Hupin, G ; Lacroix, D Publication Date: 2012-04-26 OSTI Identifier: 1089536 Report Number(s): LLNL-JRNL-552951 DOE Contract Number: W-7405-ENG-48 Resource Type: Journal Article Resource Relation: Journal Name: Physical review C, vol. 86, na, August 17, 2012, pp. 024309 Research Org: Lawrence Livermore

  14. Charm Production by Neutrinos (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Charm Production by Neutrinos Citation Details In-Document Search Title: Charm Production by Neutrinos Authors: Baltay, Charles Publication Date: 1978-01-01 OSTI Identifier: 1128238 Report Number(s): FERMILAB-PUB-78-201 DOE Contract Number: AC02-07CH11359 Resource Type: Journal Article Research Org: Fermi National Accelerator Laboratory (FNAL), Batavia, IL Sponsoring Org: USDOE Office of Science (SC), High Energy Physics (HEP) (SC-25) Country of Publication: United States

  15. Method for making biaxially textured articles by plastic deformation

    DOE Patents [OSTI]

    Goyal, Amit (Knoxville, TN)

    2002-01-01

    A method of preparing a biaxially textured article comprises the steps of providing a metal preform, coating or laminating the preform with a metal layer, deforming the layer to a sufficient degree, and rapidly recrystallizing the layer to produce a biaxial texture. A superconducting epitaxial layer may then be deposited on the biaxial texture. In some embodiments the article further comprises buffer layers, electromagnetic devices or electro-optical devices.

  16. Journal Articles - Publications - Center for Plasma in the Laboratory and

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Astrophysics - UW Madison Physics Department Articles UW Madison Center for Plasma in the Laboratory and Astrophysics Publications: Journal Articles CPLA Home - Experiments Madison Symmetric Torus Madsion Dynamo Experiment Rotating Wall Machine Plasma-Couette Experiment Madison Plasma Dynamo Experiment - Theory Groups MHD Turbulence Transport in Fusion Devices Plasma Astrophysics RFP Theory - Multi-Institutional Centers Center for Magnetic Self Organization Center for Theory and Computation

  17. LSU EFRC - Center for Atomic Level Catalyst Design - Article Archives

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Articles >> space control Catalysts by Design for Syngas Cleanup space control Quantitative Relationship between Support Porosity and the Stability of Pore-Confined Metal Nanoparticles Studied on CuZnO/SiO2 Methanol Synthesis Catalysts space control Millifluidics for Time-resolved Mapping of the Growth of Gold Nanostructures space control Geometric optimization of liquid-liquid slug flow in a flow-focusing millifluidic device for synthesis of nanomaterials space control An article about

  18. Shell-Based Simulation of Filamentary Resistive Memory. (Journal Article) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Journal Article: Shell-Based Simulation of Filamentary Resistive Memory. Citation Details In-Document Search Title: Shell-Based Simulation of Filamentary Resistive Memory. Abstract not provided. Authors: Lohn, Andrew ; Mickel, Patrick R. ; Marinella, Matthew Publication Date: 2014-06-01 OSTI Identifier: 1183002 Report Number(s): SAND2014-15228J 534144 DOE Contract Number: AC04-94AL85000 Resource Type: Journal Article Resource Relation: Journal Name: Nanotechnology Research

  19. Alaska Feature Articles and Blogs | Department of Energy

    Energy Savers [EERE]

    Alaska Feature Articles and Blogs Alaska Feature Articles and Blogs RSS March 10, 2016 Kodiak Island, Alaska. Photo by Andrew Petersen. Workshop Explores Energy Project Financing Options for Southwest Alaska Last week, the U.S. Department of Energy Office of Indian Energy hosted a Project Development and Finance workshop in conjunction with the Southwest Alaska Municipal Conference (SWAMC) Annual Economic Summit in Anchorage, Alaska. February 12, 2016 The Yukon River Inter-tribal Watershed

  20. Articles about Environmental Impacts and Siting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Environmental Impacts and Siting Articles about Environmental Impacts and Siting RSS Below are stories about environmental impacts and siting featured by the U.S. Department of Energy (DOE) Wind Program. December 7, 2015 Articles about Environmental Impacts and Siting Wind Measurement Buoy Advances Offshore Wind Energy A next-generation buoy will provide unprecedented information on offshore wind patterns, making it possible to harness wind power in entirely new locations. October 27, 2015

  1. Articles about Next-Generation Technologies | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Next-Generation Technologies Articles about Next-Generation Technologies RSS Below are stories about next-generation technologies featured by the U.S. Department of Energy (DOE) Wind Program. November 13, 2015 Secretary Moniz Announces Clean Energy Technologies are Accelerating in the U.S. Marketplace According to New Revolution...Now Report revolution-now-infographic.png October 27, 2015 Articles about Next-Generation Technologies Innovative Study Helps Offshore Wind Developers Protect Wildlife

  2. Articles about Wind Program Funding | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Wind Program Funding Articles about Wind Program Funding RSS Below are stories about funding featured by the U.S. Department of Energy (DOE) Wind Program. October 1, 2015 Articles about Wind Program Funding Energy Department Helps Manufacturers of Small and Mid-Size Wind Turbines Meet Certification Requirements On October 1, the Energy Department's National Renewable Energy Laboratory (NREL) released a fourth round of requests for proposals under the Energy Department's Competitiveness

  3. Energy.gov Article Guidance | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy.gov Article Guidance Energy.gov Article Guidance Energy.gov is managed by a team of digital communications specialists in the Office of Digital Strategy and Communications, part of the Energy Department's Office of Public Affairs. Our goal is to educate the general public about the Department's work -- who we are, what we do and -- most important -- why it matters. We achieve this goal by creating engaging, informative content that's accessible and exciting to regular people. Our ethos is

  4. ITP Industrial Distributed Energy: Distributed Energy Program...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ITP Industrial Distributed Energy: Distributed Energy Program Project Profile: Verizon Central Office Building ITP Industrial Distributed Energy: Distributed Energy Program Project...

  5. [Article 1 of 7: Motivates and Includes the Consumer

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    asset loadings is limited given the relatively limited penetration of distribution Supervisory Control and Data Acquisition systems (SCADA) and demand response into today's grid. ...

  6. Measuring the Interestingness of Articles in a Limited User Environment

    SciTech Connect (OSTI)

    Pon, R K

    2008-10-06

    Search engines, such as Google, assign scores to news articles based on their relevancy to a query. However, not all relevant articles for the query may be interesting to a user. For example, if the article is old or yields little new information, the article would be uninteresting. Relevancy scores do not take into account what makes an article interesting, which varies from user to user. Although methods such as collaborative filtering have been shown to be effective in recommendation systems, in a limited user environment, there are not enough users that would make collaborative filtering effective. A general framework, called iScore, is presented for defining and measuring the 'interestingness' of articles, incorporating user-feedback. iScore addresses various aspects of what makes an article interesting, such as topic relevancy, uniqueness, freshness, source reputation, and writing style. It employs various methods to measure these features and uses a classifier operating on these features to recommend articles. The basic iScore configuration is shown to improve recommendation results by as much as 20%. In addition to the basic iScore features, additional features are presented to address the deficiencies of existing feature extractors, such as one that tracks multiple topics, called MTT, and a version of the Rocchio algorithm that learns its parameters online as it processes documents, called eRocchio. The inclusion of both MTT and eRocchio into iScore is shown to improve iScore recommendation results by as much as 3.1% and 5.6%, respectively. Additionally, in TREC11 Adaptive Filter Task, eRocchio is shown to be 10% better than the best filter in the last run of the task. In addition to these two major topic relevancy measures, other features are also introduced that employ language models, phrases, clustering, and changes in topics to improve recommendation results. These additional features are shown to improve recommendation results by iScore by up to 14%. Due to varying reasons that users hold regarding why an article is interesting, an online feature selection method in naive Bayes is also introduced. Online feature selection can improve recommendation results in iScore by up to 18.9%. In summary, iScore in its best configuration can outperform traditional IR techniques by as much as 50.7%. iScore and its components are evaluated in the news recommendation task using three datasets from Yahoo! News, actual users, and Digg. iScore and its components are also evaluated in the TREC Adaptive Filter task using the Reuters RCV1 corpus.

  7. Articles which include chevron film cooling holes, and related processes

    DOE Patents [OSTI]

    Bunker, Ronald Scott; Lacy, Benjamin Paul

    2014-12-09

    An article is described, including an inner surface which can be exposed to a first fluid; an inlet; and an outer surface spaced from the inner surface, which can be exposed to a hotter second fluid. The article further includes at least one row or other pattern of passage holes. Each passage hole includes an inlet bore extending through the substrate from the inlet at the inner surface to a passage hole-exit proximate to the outer surface, with the inlet bore terminating in a chevron outlet adjacent the hole-exit. The chevron outlet includes a pair of wing troughs having a common surface region between them. The common surface region includes a valley which is adjacent the hole-exit; and a plateau adjacent the valley. The article can be an airfoil. Related methods for preparing the passage holes are also described.

  8. Process for fabricating ribbed electrode substrates and other articles

    DOE Patents [OSTI]

    Goller, Glen J. (West Springfield, MA); Breault, Richard D. (Coventry, CT); Smith, J. Harold (Amherst, MA)

    1984-01-01

    A process for fabricating a resin bonded carbon fiber article, and in particular electrochemical cell electrode substrates and the like requiring different mean pore sizes in different areas, involves simultaneously heating and compacting different mixtures of carbon fibers and resin in different areas of an article forming mold, wherein the carbon fibers in each of the different mixtures have different, known bulk densities. The different bulk densities of the carbon fibers in the mixtures are chosen to yield the desired mean pore sizes and other properties in the article after heating and compacting the mixtures. Preferably, the different bulk densities are obtained using different carbon fiber lengths in the molding mixtures. The process is well suited to forming ribbed electrode substrates with preselected optimum mean pore sizes, porosities, and densities in the ribs, the webs connecting the ribs, and in the edge seals.

  9. Branching Mechanisms in Surfactant Micellar Growth (Journal Article) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Journal Article: Branching Mechanisms in Surfactant Micellar Growth Citation Details In-Document Search Title: Branching Mechanisms in Surfactant Micellar Growth Authors: Tang, M ; Carter, W C Publication Date: 2012-08-20 OSTI Identifier: 1169255 Report Number(s): LLNL-JRNL-575474 DOE Contract Number: DE-AC52-07NA27344 Resource Type: Journal Article Resource Relation: Journal Name: Journal of Physical Chemistry B, na, na, March 14, 2013, pp. 2898 Research Org: Lawrence

  10. Sample Employee Newsletter Articles: Plug-In Electric Vehicles 101

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Vehicles 101 This document introduces the basics of Plug-In Electric Vehicles (PEV) and includes a list of engaging top 10 facts about PEVs that will peak the interest of your employees. ï‚· Vehicle Basics: Hybrid and Plug-In Electric Vehicles Use this article to explain the difference between various ways of referring to electric drive vehicles. ï‚· Energy 101: Plug-In Electric Vehicles (with video) Your employees have seen your workplace charging installation, now use this article and video to

  11. Method of making quasicrystal alloy powder, protective coatings and articles

    DOE Patents [OSTI]

    Shield, Jeffrey E. (Sandy, UT); Goldman, Alan I. (Ames, IA); Anderson, Iver E. (Ames, IA); Ellis, Timothy W. (Ames, IA); McCallum, R. William (Ames, IA); Sordelet, Daniel J. (Ames, IA)

    1995-07-18

    A method of making quasicrystalline alloy particulates wherein an alloy is superheated and the melt is atomized to form generally spherical alloy particulates free of mechanical fracture and exhibiting a predominantly quasicrystalline in the atomized condition structure. The particulates can be plasma sprayed to form a coating or consolidated to form an article of manufacture.

  12. Method of making quasicrystal alloy powder, protective coatings and articles

    DOE Patents [OSTI]

    Shield, J.E.; Goldman, A.I.; Anderson, I.E.; Ellis, T.W.; McCallum, R.W.; Sordelet, D.J.

    1995-07-18

    A method of making quasicrystalline alloy particulates is disclosed wherein an alloy is superheated and the melt is atomized to form generally spherical alloy particulates free of mechanical fracture and exhibiting a predominantly quasicrystalline in the atomized condition structure. The particulates can be plasma sprayed to form a coating or consolidated to form an article of manufacture. 3 figs.

  13. Method of producing Pb-stabilized superconductor precursors and method of producing superconductor articles therefrom

    DOE Patents [OSTI]

    Kroeger, D.M.; Hsu, H.S.; Brynestad, J.

    1995-03-07

    Metal oxide superconductor powder precursors are prepared in an aerosol pyrolysis process. A solution of the metal cations is introduced into a furnace at 600--1,000 C for 0.1 to 60 seconds. The process produces micron to submicron size powders without the usual loss of the lead stabilizer. The resulting powders have a narrow particle size distribution, a small grain size, and are readily converted to a superconducting composition upon subsequent heat treatment. The precursors are placed in a metal body deformed to form a wire or tape and heated to form a superconducting article. The fine powders permit a substantial reduction in heat treatment time, thus enabling a continuous processing of the powders into superconducting wire, tape or multifilamentary articles by the powder-in-tube process. 3 figs.

  14. Method of producing Pb-stabilized superconductor precursors and method of producing superconductor articles therefrom

    DOE Patents [OSTI]

    Kroeger, Donald M. (Knoxville, TN); Hsu, Huey S. (Knoxville, TN); Brynestad, Jorulf (Oak Ridge, TN)

    1995-01-01

    Metal oxide superconductor powder precursors are prepared in an aerosol pyrolysis process. A solution of the metal cations is introduced into a furnace at 600.degree.-1000.degree. C. for 0.1 to 60 seconds. The process produces micron to submicron size powders without the usual loss of the lead stabilizer. The resulting powders have a narrow particle size distribution, a small grain size, and are readily converted to a superconducting composition upon subsequent heat treatment. The precursors are placed in a metal body deformed to form a wire or tape and heated to form a superconducting article. The fine powders permit a substantial reduction in heat treatment time, thus enabling a continuous processing of the powders into superconducting wire, tape or multifilamentary articles by the powder-in-tube process.

  15. Distributed Generation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Untapped Value of Backup Generation While new guidelines and regulations such as IEEE (Institute of Electrical and Electronics Engineers) 1547 have come a long way in addressing interconnection standards for distributed generation, utilities have largely overlooked the untapped potential of these resources. Under certain conditions, these units (primarily backup generators) represent a significant source of power that can deliver utility services at lower costs than traditional centralized

  16. Distribution Category:

    Office of Legacy Management (LM)

    - Distribution Category: Remedial Action and Decommissioning Program (UC-70A) DOE/EV-0005/48 ANL-OHS/HP-84-104 ARGONNE NATIONAL LABORATORY 9700 South Cass Avenue Argonne, Illinois 60439 FORMERLY UTILIZED MXD/AEC SITES REMEDIAL ACTION PROGRAM RADIOLOGICAL SURVEY OF THE HARSHAW CHEMICAL COMPANY CLEVELAND. OHIO Prepared by R. A. Wynveen Associate Division Director, OHS W. H. Smith Senior Health Physicist C. M. Sholeen Health Physicist A. L. Justus Health Physicist K. F. Flynn Health Physicist

  17. Method and apparatus for making articles from particle based materials

    DOE Patents [OSTI]

    Moorhead, A.J.; Menchhofer, P.A.

    1995-12-19

    A method and apparatus are disclosed for the production of articles made of a particle-based material; e.g., ceramics and sintered metals. In accordance with the invention, a thermally settable slurry containing a relatively high concentration of the particles is conveyed through an elongate flow area having a desired cross-sectional configuration. The slurry is heated as it is advanced through the flow area causing the slurry to set or harden in a shape which conforms to the cross-sectional configuration of the flow area. The material discharges from the flow area as a self-supporting solid of near net final dimensions. The article may then be sintered to consolidate the particles and provide a high density product. 10 figs.

  18. Method and apparatus for making articles from particle based materials

    DOE Patents [OSTI]

    Moorhead, Arthur J. (Knoxville, TN); Menchhofer, Paul A. (Oak Ridge, TN)

    1995-01-01

    A method and apparatus for the production of articles made of a particle-based material; e.g., ceramics and sintered metals. In accordance with the invention, a thermally settable slurry containing a relatively high concentration of the particles is conveyed through an elongate flow area having a desired cross-sectional configuration. The slurry is heated as it is advanced through the flow area causing the slurry to set or harden in a shape which conforms to the cross-sectional configuration of the flow area. The material discharges from the flow area as a self-supporting solid of near net final dimensions. The article may then be sintered to consolidate the particles and provide a high density product.

  19. [Article 1 of 7: Motivates and Includes the Consumer]

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    team Energy Central series on the Seven Principal Characteristics of the Modern Grid [Article 6 of 7: Research on the Characteristics of a Smart Grid by the NETL Modern Grid Strategy team Operates Resiliently against Attack and Natural Disaster Last month we presented the fifth principal characteristic of a Smart Grid, "Power Quality for the Digital Economy." This month we present the sixth characteristic, "Operates Resiliently against Attack and Natural Disaster." This

  20. [Article 1 of 7: Motivates and Includes the Consumer]

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    series on the Seven Principal Characteristics of the Modern Grid [Article 3 of 7]: Research on the Characteristics of a Smart Grid by the NETL Modern Grid Strategy Team Enables Markets Last month we presented the second Principal Characteristic of a Smart Grid, "Accommodates All Generation and Storage Options." This month we present the third characteristic, "Enables Markets." This characteristic will fundamentally enable competitive and regulated markets to the benefit of

  1. [Article 1 of 7: Motivates and Includes the Consumer]

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Series on the Seven Principal Characteristics of the Modern Grid [Article 1 of 7: Motivates and Includes the Consumer] In October 2007, Ken Silverstein (Energy Central) wrote an editorial, "Empowering Consumers" that hit a strong, kindred chord with the DOE/National Energy Technology Laboratory (NETL) Modern Grid Strategy team. Through subsequent discussions with Ken and Bill Opalka, Editor- In-Chief, Topics Centers, we decided it would be informative to the industry if the Modern Grid

  2. Molecular Simulation of Protein Aggregation (Journal Article) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect Molecular Simulation of Protein Aggregation Citation Details In-Document Search Title: Molecular Simulation of Protein Aggregation Authors: Bratko, Dusan ; Cellmer, Troy ; Prausnitz, John M. ; Blanch, Harvey W. Publication Date: 2006-10-01 OSTI Identifier: 926889 Report Number(s): LBNL--61957 R&D Project: 402201; BnR: KC0302040 DOE Contract Number: DE-AC02-05CH11231 Resource Type: Journal Article Resource Relation: Journal Name: Biotechnology and Bioengineering; Journal Volume:

  3. New Directions: Toward a community emissions approach (Journal Article) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect New Directions: Toward a community emissions approach Citation Details In-Document Search Title: New Directions: Toward a community emissions approach Emissions inventories accounting for anthropogenic and natural inputs to the atmosphere provide critical information for modeling and observational systems that inform air quality and climate science and policy. This article argues that the need for accurate, timely and traceable inventories requires a broad science-policy

  4. Precision timing measurements for high energy photons (Journal Article) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Journal Article: Precision timing measurements for high energy photons Citation Details In-Document Search Title: Precision timing measurements for high energy photons Particle colliders operating at high luminosities present challenging environments for high energy physics event reconstruction and analysis. We discuss how timing information, with a precision on the order of 10 ps, can aid in the reconstruction of physics events under such conditions. We present calorimeter

  5. Preheating in supersymmetric theories (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Preheating in supersymmetric theories Citation Details In-Document Search Title: Preheating in supersymmetric theories No abstract prepared. Authors: Chacko, Z. ; Murayama, Hitoshi ; Perelstein, Maxim Publication Date: 2002-12-12 OSTI Identifier: 842545 Report Number(s): LBNL--51663 R&D Project: PTHOPS; TRN: US0503586 DOE Contract Number: AC03-76SF00098 Resource Type: Journal Article Resource Relation: Journal Name: Physical Review D; Journal Volume: 68; Other Information: Journal

  6. How likely are constituent quanta to initiate inflation? (Journal Article)

    Office of Scientific and Technical Information (OSTI)

    | SciTech Connect How likely are constituent quanta to initiate inflation? Citation Details In-Document Search Title: How likely are constituent quanta to initiate inflation? Authors: Berezhiani, Lasha ; Trodden, Mark Publication Date: 2015-10-01 OSTI Identifier: 1209989 Grant/Contract Number: FG02-95ER40893 Type: Published Article Journal Name: Physics Letters. Section B Additional Journal Information: Journal Volume: 749; Journal Issue: C; Journal ID: ISSN 0370-2693 Publisher: Elsevier

  7. MCNPX Improvements for Threat Reduction Applications (Journal Article) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Journal Article: MCNPX Improvements for Threat Reduction Applications Citation Details In-Document Search Title: MCNPX Improvements for Threat Reduction Applications Enhancements contained in the current MCNPX 2.6.0 Radiation Safety Information Computational Center (RSICC) release will be presented, including stopped-muon physics, delayed neutron and photon generation, and automatic generation of source photons. Preliminary benchmarking comparisons with data taken with a muon

  8. Text analysis methods, text analysis apparatuses, and articles of manufacture

    DOE Patents [OSTI]

    Whitney, Paul D; Willse, Alan R; Lopresti, Charles A; White, Amanda M

    2014-10-28

    Text analysis methods, text analysis apparatuses, and articles of manufacture are described according to some aspects. In one aspect, a text analysis method includes accessing information indicative of data content of a collection of text comprising a plurality of different topics, using a computing device, analyzing the information indicative of the data content, and using results of the analysis, identifying a presence of a new topic in the collection of text.

  9. The Effective Field Theory of Multifield Inflation (Journal Article) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect The Effective Field Theory of Multifield Inflation Citation Details In-Document Search Title: The Effective Field Theory of Multifield Inflation Authors: Senatore, Leonardo ; /Princeton, Inst. Advanced Study /Stanford U., Phys. Dept. /KIPAC, Menlo Park ; Zaldarriaga, Matias ; /Princeton, Inst. Advanced Study Publication Date: 2013-06-18 OSTI Identifier: 1084310 Report Number(s): SLAC-PUB-15598 arXiv:1009.2093 DOE Contract Number: AC02-76SF00515 Resource Type: Journal Article

  10. Coupling Schemes in Terahertz Planar Metamaterials (Journal Article) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Journal Article: Coupling Schemes in Terahertz Planar Metamaterials Citation Details In-Document Search Title: Coupling Schemes in Terahertz Planar Metamaterials We present a review of the different coupling schemes in a planar array of terahertz metamaterials. The gap-to-gap near-field capacitive coupling between split-ring resonators in a unit cell leads to either blue shift or red shift of the fundamental inductive-capacitive ( LC ) resonance, depending on the position of

  11. Growth morphology and properties of metals on graphene (Journal Article) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect SciTech Connect Search Results Journal Article: Growth morphology and properties of metals on graphene Citation Details In-Document Search This content will become publicly available on December 1, 2016 Title: Growth morphology and properties of metals on graphene Graphene, a single atomic layer of graphite, has been the focus of recent intensive studies due to its novel electronic and structural properties. With this study, metals grown on graphene also have been of interest

  12. Spectroscopic Needs for Imaging Dark Energy Experiments (Journal Article) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Journal Article: Spectroscopic Needs for Imaging Dark Energy Experiments Citation Details In-Document Search Title: Spectroscopic Needs for Imaging Dark Energy Experiments × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service. Visit OSTI to utilize additional information resources in energy science and technology. A paper

  13. A Hierarchical Evaluation of Regional Climate Simulations (Journal Article)

    Office of Scientific and Technical Information (OSTI)

    | SciTech Connect Journal Article: A Hierarchical Evaluation of Regional Climate Simulations Citation Details In-Document Search Title: A Hierarchical Evaluation of Regional Climate Simulations Authors: Leung, Ruby [1] ; Ringler, Todd [2] ; Collins, William D [3] ; Taylor, Mark [4] ; Ashfaq, Moetasim [5] + Show Author Affiliations Pacific Northwest National Laboratory (PNNL) Los Alamos National Laboratory (LANL) Lawrence Berkeley National Laboratory (LBNL) Sandia National Laboratories (SNL)

  14. ACM TOMS replicated computational results initiative (Journal Article) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Journal Article: ACM TOMS replicated computational results initiative Citation Details In-Document Search This content will become publicly available on June 3, 2016 Title: ACM TOMS replicated computational results initiative In this study, the scientific community relies on the peer review process for assuring the quality of published material, the goal of which is to build a body of work we can trust. Computational journals such as The ACM Transactions on Mathematical

  15. Beyond Mean-Field Calculation For Pairing Correlation (Journal Article) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Journal Article: Beyond Mean-Field Calculation For Pairing Correlation Citation Details In-Document Search Title: Beyond Mean-Field Calculation For Pairing Correlation × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service. Visit OSTI to utilize additional information resources in energy science and technology. A paper copy

  16. Bounding gauged skyrmion masses (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Bounding gauged skyrmion masses Citation Details In-Document Search Title: Bounding gauged skyrmion masses Authors: Brihaye, Yves ; Hill, Christopher T. ; Zachos, Cosmas K. Publication Date: 2004-09-01 OSTI Identifier: 1151557 Report Number(s): ANL-HEP-PR-04-89 DOE Contract Number: AC02-07CH11359 Resource Type: Journal Article Research Org: Fermi National Accelerator Laboratory (FNAL), Batavia, IL Sponsoring Org: USDOE Office of Science (SC), High Energy Physics (HEP) (SC-25) Country of

  17. Carbon nanotube terahertz detector. (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Carbon nanotube terahertz detector. Citation Details In-Document Search Title: Carbon nanotube terahertz detector. Abstract not provided. Authors: Leonard, Francois Leonard ; Talin, Albert Alec ; Erickson, Kristopher J. Publication Date: 2014-05-01 OSTI Identifier: 1146051 Report Number(s): SAND2014-4425J 519437 DOE Contract Number: DE-AC04-94AL85000 Resource Type: Journal Article Resource Relation: Journal Name: Nanoletters; Related Information: Proposed for publication in Nanoletters

  18. Chiral dynamics and peripheral transverse densities (Journal Article) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Journal Article: Chiral dynamics and peripheral transverse densities Citation Details In-Document Search Title: Chiral dynamics and peripheral transverse densities In the partonic (or light-front) description of relativistic systems the electromagnetic form factors are expressed in terms of frame-independent charge and magnetization densities in transverse space. This formulation allows one to identify the chiral components of nucleon structure as the peripheral densities at

  19. Microsoft Word - Energy.gov Article Guidance.docx

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of 8 U.S. DEPARTMENT OF ENERGY Energy.gov Article Guidance Last reviewed and updated January 2014 Energy.gov is managed by a team of digital communications specialists in the Office of Digital Strategy and Communications, part of the Energy Department's Office of Public Affairs. Our goal is to educate the general public about the Department's work -- who we are, what we do and -- most important -- why it matters. We achieve this goal by creating engaging, informative content that's accessible

  20. Hypothesis analysis methods, hypothesis analysis devices, and articles of manufacture

    DOE Patents [OSTI]

    Sanfilippo, Antonio P. (Richland, WA); Cowell, Andrew J. (Kennewick, WA); Gregory, Michelle L. (Richland, WA); Baddeley, Robert L. (Richland, WA); Paulson, Patrick R. (Pasco, WA); Tratz, Stephen C. (Richland, WA); Hohimer, Ryan E. (West Richland, WA)

    2012-03-20

    Hypothesis analysis methods, hypothesis analysis devices, and articles of manufacture are described according to some aspects. In one aspect, a hypothesis analysis method includes providing a hypothesis, providing an indicator which at least one of supports and refutes the hypothesis, using the indicator, associating evidence with the hypothesis, weighting the association of the evidence with the hypothesis, and using the weighting, providing information regarding the accuracy of the hypothesis.

  1. JBEI Featured in Chemical & Engineering News Cover Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Featured in Chemical & Engineering News Cover Article - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense

  2. NEVADA FIELD OFFICE PROHIBITED ARTICLES ON NEVADA NATIONAL SECURITY SITE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NEVADA FIELD OFFICE PROHIBITED ARTICLES ON NEVADA NATIONAL SECURITY SITE PUBLIC TOURS The following items are prohibited on the Nevada National Security Site public tours. If you have any of these items on your person, please return them to your vehicle. Tour escorts are required to do random checks. * Cameras/Camcorders * Cellular phones * Bluetooth enable devices * Portable Data Storage Devices * Computers * Recording Devices * Weapons * Explosives * Pets & Animals * Ammunition * PDA,

  3. Sneutrino chaotic inflation and landscape (Journal Article) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect Sneutrino chaotic inflation and landscape Citation Details In-Document Search Title: Sneutrino chaotic inflation and landscape Authors: Murayama, Hitoshi ; Nakayama, Kazunori ; Takahashi, Fuminobu ; Yanagida, Tsutomu T. Publication Date: 2014-11-01 OSTI Identifier: 1198366 Grant/Contract Number: AC02-05CH11231 Type: Published Article Journal Name: Physics Letters. Section B Additional Journal Information: Journal Volume: 738; Journal Issue: C; Journal ID: ISSN 0370-2693 Publisher:

  4. Temperature of Multibubble Sonoluminescence in Water (Journal Article) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Temperature of Multibubble Sonoluminescence in Water Citation Details In-Document Search Title: Temperature of Multibubble Sonoluminescence in Water No abstract prepared. Authors: Didenko, Yuri T. ; McNamara, William B. ; Suslick, Kenneth S. Publication Date: 1999-11-01 OSTI Identifier: 850473 Resource Type: Journal Article Resource Relation: Journal Name: Journal of Physical Chemistry A; Journal Volume: 103; Journal Issue: 50 Publisher: American Chemical Society Research

  5. The Muon Accelerator Program (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Journal Article: The Muon Accelerator Program Citation Details In-Document Search Title: The Muon Accelerator Program Multi-TeV Muon Colliders and high intensity Neutrino Factories have captured the imagination of the particle physics community. These new types of facility both require an advanced muon source capable of producing O(10{sup 21}) muons per year. The muons must be captured within bunches, and their phase space manipulated so that they fit within the acceptance of an accelerator. In

  6. The majorana experiment (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Journal Article: The majorana experiment Citation Details In-Document Search Title: The majorana experiment × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service. Visit OSTI to utilize additional information resources in energy science and technology. A paper copy of this document is also available for sale to the public from the National

  7. Articles about Grid Integration and Transmission | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Grid Integration and Transmission Articles about Grid Integration and Transmission RSS Below are stories about grid integration and transmission featured by the U.S. Department of Energy (DOE) Wind Program. September 16, 2015 Argonne National Laboratory Develops New Model to Quantify the Impacts of Variable Energy Resources on Generation Expansion and System Reliability The penetration level of variable energy resources, such as wind and solar, has been steadily increasing in many modern power

  8. Articles about Resource Assessment and Characterization | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Resource Assessment and Characterization Articles about Resource Assessment and Characterization RSS Below are stories about resource assessment and characterization featured by the U.S. Department of Energy (DOE) Wind Program. May 19, 2015 Energy Department Releases Report, Evaluates Potential for Wind Power in All 50 States New report shows how the United States can unlock the vast potential for wind energy deployment through next-generation turbines. May 18, 2015 LLNL Predicts Wind

  9. DISTRIBUTION CATEGORY

    Office of Scientific and Technical Information (OSTI)

    DISTRIBUTION CATEGORY uc-11 I A W E N C E LIVERMORE IABORATORY University of Cahfmia/Livermore, California/94550 UCRL-52658 CALCULATION OF CHEMICAL EQUILIBRIUM BETWEEN AQUEOUS SOLUTION AND MINERALS: THE EQ3/6 - - SOFTWARE PACKAGE T. J. Wolery MS. date: February 1, 1979 . . - . . - . Tho rcpon rn prepared as an account of work sponsored by the United Stater Government. Seither Lhc Urutcd Stater nor the Umted Stater Department of Energy, nor any of their employees. nor any of their E O ~ ~ ~ B C I

  10. [Article 1 of 7: Motivates and Includes the Consumer]

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Team Energy Central series on the Seven Principal Characteristics of the Modern Grid [Article 5 of 7]: Research on the Characteristics of a Smart Grid by the NETL Modern Grid Strategy Team Power Quality for the Digital Economy Last month we presented the 4th Principal Characteristic of a Smart Grid, "Optimizes Assets and Operates Efficiently." This month we present the 5th characteristic, "Provides Power Quality for the Digital Economy." This 5 th characteristic is intended

  11. Method of making a hydrogen transport membrane, and article

    DOE Patents [OSTI]

    Schwartz, Joseph M.; Corpus, Joseph M.; Lim, Hankwon

    2015-07-21

    The present invention relates to a method of manufacturing a hydrogen transport membrane and the composite article itself. More specifically, the invention relates to producing a membrane substrate, wherein the ceramic substrate is coated with a metal oxide slurry, thereby eliminating the need for an activation step prior to plating the ceramic membrane through an electroless plating process. The invention also relates to modifying the pore size and porosity of the substrate by oxidation or reduction of the particles deposited by the metal oxide slurry.

  12. Organic Maturity, Elastic Properties, and Textural (Journal Article) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Organic Maturity, Elastic Properties, and Textural Citation Details In-Document Search Title: Organic Maturity, Elastic Properties, and Textural Organic-rich rocks have long been recognized as so Authors: Saeed Zargari ; Kenechukwu C. Mba ; Earl D. Mattson ; , Publication Date: 2013-07-01 OSTI Identifier: 1107280 Report Number(s): INL/JOU-12-27454 Journal ID: ISSN 0016--8033 DOE Contract Number: DE-AC07-05ID14517 Resource Type: Journal Article Resource Relation: Journal Name:

  13. ILC Comes to Snowmass (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ILC Comes to Snowmass Citation Details In-Document Search Title: ILC Comes to Snowmass No abstract prepared. Authors: Berger, E. ; /Argonne ; Burrows, P. ; /Queen Mary, U. of London ; Monig, K. ; /DESY ; Peskin, M. ; /SLAC ; Royole-Degieux, P. ; /Orsay, IPN Publication Date: 2006-03-01 OSTI Identifier: 876763 Report Number(s): SLAC-REPRINT-2005-160 Journal ID: ISSN 0304-288X; CECOA2; TRN: US0601282 DOE Contract Number: AC02-76SF00515 Resource Type: Journal Article Resource Relation: Journal

  14. Spectroscopic Needs for Imaging Dark Energy Experiments (Journal Article) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Journal Article: Spectroscopic Needs for Imaging Dark Energy Experiments Citation Details In-Document Search Title: Spectroscopic Needs for Imaging Dark Energy Experiments Ongoing and near-future imaging-based dark energy experiments are critically dependent upon photometric redshifts (a.k.a. photo-z's): i.e., estimates of the redshifts of objects based only on flux information obtained through broad filters. Higher-quality, lower-scatter photo-z's will result in smaller

  15. Cascades with Adjoint Matter: Adjoint Transitions (Journal Article) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Cascades with Adjoint Matter: Adjoint Transitions Citation Details In-Document Search Title: Cascades with Adjoint Matter: Adjoint Transitions Authors: Simic, Dusan ; /Stanford U., Phys. Dept. /SLAC Publication Date: 2013-06-18 OSTI Identifier: 1084307 Report Number(s): SLAC-PUB-15602 arXiv:1009.0023 DOE Contract Number: AC02-76SF00515 Resource Type: Journal Article Resource Relation: Journal Name: JHEP 1105:104,2011 Research Org: SLAC National Accelerator Laboratory (SLAC)

  16. Image change detection systems, methods, and articles of manufacture

    DOE Patents [OSTI]

    Jones, James L.; Lassahn, Gordon D.; Lancaster, Gregory D.

    2010-01-05

    Aspects of the invention relate to image change detection systems, methods, and articles of manufacture. According to one aspect, a method of identifying differences between a plurality of images is described. The method includes loading a source image and a target image into memory of a computer, constructing source and target edge images from the source and target images to enable processing of multiband images, displaying the source and target images on a display device of the computer, aligning the source and target edge images, switching displaying of the source image and the target image on the display device, to enable identification of differences between the source image and the target image.

  17. Supersymmetric Defect Models and Mirror Symmetry (Journal Article) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Supersymmetric Defect Models and Mirror Symmetry Citation Details In-Document Search Title: Supersymmetric Defect Models and Mirror Symmetry Authors: Hook, Anson ; Kachru, Shamit ; Torroba, Gonzalo Publication Date: 2013-09-04 OSTI Identifier: 1092081 Report Number(s): SLAC-PUB-15725 arXiv:1308.4416 DOE Contract Number: AC02-76SF00515 Resource Type: Journal Article Resource Relation: Journal Name: arXiv:1308.4416 Research Org: SLAC National Accelerator Laboratory (SLAC)

  18. The Intermediate Higgs (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    The Intermediate Higgs Citation Details In-Document Search Title: The Intermediate Higgs Authors: Katz, Emanuel ; /Boston U. /SLAC ; Nelson, Ann E. ; /Washington U., Seattle ; Walker, Devin G.E. ; /Harvard U. Publication Date: 2005-06-20 OSTI Identifier: 890349 Report Number(s): SLAC-PUB-11111 hep-ph/0504252 DOE Contract Number: AC02-76SF00515 Resource Type: Journal Article Resource Relation: Journal Name: JHEP 0508:074,2005 Research Org: Stanford Linear Accelerator Center (SLAC) Sponsoring Org:

  19. Turbulence-Flame Interactions in Type Ia Supernovae (Journal Article) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Journal Article: Turbulence-Flame Interactions in Type Ia Supernovae Citation Details In-Document Search Title: Turbulence-Flame Interactions in Type Ia Supernovae × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service. Visit OSTI to utilize additional information resources in energy science and technology. A paper copy of

  20. Articles about Wind Program Analysis | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Wind Program Analysis Articles about Wind Program Analysis RSS Below are stories about research efforts featured by the U.S. Department of Energy (DOE) Wind Program. September 29, 2015 New Report Shows Domestic Offshore Wind Industry Potential, 21 Projects Planned in U.S. Waters The Energy Department today released a new report showing strong progress for the U.S. offshore wind market-including the start of construction of the nation's first commercial-scale offshore wind farm, one of 21

  1. Text analysis devices, articles of manufacture, and text analysis methods

    DOE Patents [OSTI]

    Turner, Alan E; Hetzler, Elizabeth G; Nakamura, Grant C

    2015-03-31

    Text analysis devices, articles of manufacture, and text analysis methods are described according to some aspects. In one aspect, a text analysis device includes a display configured to depict visible images, and processing circuitry coupled with the display and wherein the processing circuitry is configured to access a first vector of a text item and which comprises a plurality of components, to access a second vector of the text item and which comprises a plurality of components, to weight the components of the first vector providing a plurality of weighted values, to weight the components of the second vector providing a plurality of weighted values, and to combine the weighted values of the first vector with the weighted values of the second vector to provide a third vector.

  2. Text analysis devices, articles of manufacture, and text analysis methods

    DOE Patents [OSTI]

    Turner, Alan E; Hetzler, Elizabeth G; Nakamura, Grant C

    2013-05-28

    Text analysis devices, articles of manufacture, and text analysis methods are described according to some aspects. In one aspect, a text analysis device includes processing circuitry configured to analyze initial text to generate a measurement basis usable in analysis of subsequent text, wherein the measurement basis comprises a plurality of measurement features from the initial text, a plurality of dimension anchors from the initial text and a plurality of associations of the measurement features with the dimension anchors, and wherein the processing circuitry is configured to access a viewpoint indicative of a perspective of interest of a user with respect to the analysis of the subsequent text, and wherein the processing circuitry is configured to use the viewpoint to generate the measurement basis.

  3. Radiation analysis devices, radiation analysis methods, and articles of manufacture

    DOE Patents [OSTI]

    Roybal, Lyle Gene

    2010-06-08

    Radiation analysis devices include circuitry configured to determine respective radiation count data for a plurality of sections of an area of interest and combine the radiation count data of individual of sections to determine whether a selected radioactive material is present in the area of interest. An amount of the radiation count data for an individual section is insufficient to determine whether the selected radioactive material is present in the individual section. An article of manufacture includes media comprising programming configured to cause processing circuitry to perform processing comprising determining one or more correction factors based on a calibration of a radiation analysis device, measuring radiation received by the radiation analysis device using the one or more correction factors, and presenting information relating to an amount of radiation measured by the radiation analysis device having one of a plurality of specified radiation energy levels of a range of interest.

  4. A device for microwave sintering large ceramic articles

    DOE Patents [OSTI]

    Kimrey, H.D. Jr.

    1987-07-24

    A microwave sintering system is provided for uniform sintering of large and/or irregular shapes ceramic articles at microwave frequencies of at least 28 GHz in the hundreds of kilowatts power range in an untuned cavity. A 28 GHz, 200 kw gyrotron with variable power output is used as the microwave source connected to an untuned microwave cavity formed of an electrically conductive housing. The part to be sintered is placed in the cavity and supported on a removable high temperature table in a central location within the cavity. The part is surrounded by a microwave transparent bulk insulating material to reduce thermal heat loss at the part surfaces and maintain more uniform temperature. The cavity may be operated at a high vacuum to aid in preventing arcing. The system allows controlled increased heating rates of greater than 200/degree/C/min to provide rapid heating of a ceramic part to a selected sintering temperature where it is maintained by regulating the microwave power applied to the part. As a result of rapid heating, the extent on non-isothermal processes such as segregation of impurities to the grain boundaries are minimized and exaggerated grain growth is reduced, thereby strengthening the mechanical properties of the ceramic part being sintered. 1 fig.

  5. Ceramic-metal composite article and joining method

    DOE Patents [OSTI]

    Kang, Shinhoo; Selverian, John H.; Kim, Hans J.; Dunn, Edmund M.; Kim, Kyung S.

    1992-01-01

    A ceramic-metal article including a ceramic rod, a metal rod, and a braze joining the ceramic and metal rods at a braze area of a coaxial bore in the metal rod. The bore gradually decreases in diameter, having an inward seat area sized for close sliding fit about the ceramic, a larger brazing area near the joint end, and a void area intermediate the braze and seat areas. The ceramic is seated without brazing in the bore seat area. The side wall between the brazing area and the metal outer surface is about 0.030-0.080 inch. The braze includes an inner braze layer, an outer braze layer, and an interlayer about 0.030-0.090 inch thick. A shoulder between the brazing and void areas supports the interlayer during bonding while preventing bonding between the void area and the ceramic member, leaving a void space between the void area and the ceramic member. A venting orifice extends generally radially through the metal member from the outer surface to the void space. The braze layers are palladium, platinum, gold, silver, copper, nickel, indium, chromium, molybdenum, niobium, iron, aluminum, or alloys thereof. Preferred is a gold-palladium-nickel brazing alloy. The interlayer is nickel, molybdenum, copper, tantalum, tungsten, niobium, aluminum, cobalt, iron, or an alloy thereof.

  6. Ceramic-metal composite article and joining method

    DOE Patents [OSTI]

    Kang, S.; Selverian, J.H.; Kim, H.J.; Dunn, E.M.; Kim, K.S.

    1992-04-28

    A ceramic-metal article including a ceramic rod, a metal rod, and a braze joining the ceramic and metal rods at a braze area of a coaxial bore in the metal rod is described. The bore gradually decreases in diameter, having an inward seat area sized for close sliding fit about the ceramic, a larger brazing area near the joint end, and a void area intermediate the braze and seat areas. The ceramic is seated without brazing in the bore seat area. The side wall between the brazing area and the metal outer surface is about 0.030-0.080 inch. The braze includes an inner braze layer, an outer braze layer, and an interlayer about 0.030-0.090 inch thick. A shoulder between the brazing and void areas supports the interlayer during bonding while preventing bonding between the void area and the ceramic member, leaving a void space between the void area and the ceramic member. A venting orifice extends generally radially through the metal member from the outer surface to the void space. The braze layers are palladium, platinum, gold, silver, copper, nickel, indium, chromium, molybdenum, niobium, iron, aluminum, or alloys thereof. Preferred is a gold-palladium-nickel brazing alloy. The interlayer is nickel, molybdenum, copper, tantalum, tungsten, niobium, aluminum, cobalt, iron, or an alloy thereof. 4 figs.

  7. PART TWO PERMITTING/CLOSURE OF TSD UNITS/GROUPS ARTICLE VI. ...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    16- PART TWO PERMITTINGCLOSURE OF TSD UNITSGROUPS ARTICLE VI. FINDINGS AND DETERMINATIONS 23. The following paragraphs of this Article constitute a summary of the facts upon...

  8. Heavy-element fission barriers (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Search Results Journal Article: Heavy-element fission barriers Citation ... OSTI Identifier: 21289903 Resource Type: Journal Article Resource Relation: Journal Name: ...

  9. EIA - Coal Distribution

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Annual Coal Distribution Report > Annual Coal Distribution Archives Annual Coal Distribution Archive Release Date: February 17, 2011 Next Release Date: December 2011 Domestic coal distribution by origin State, destination State, consumer category, method of transportation; foreign coal distribution by major coal-exporting state and method of transportation; and domestic and foreign coal distribution by origin state. Year Domestic and foreign distribution of U.S. coal by State of origin

  10. Method For Removing Volatile Components From A Gel-Cast Ceramic Article

    DOE Patents [OSTI]

    Klug, Frederic Joseph (Schenectady, NY); DeCarr, Sylvia Marie (Schenectady, NY)

    2004-09-07

    A method of removing substantially all of the volatile component in a green, volatile-containing ceramic article is disclosed. The method comprises freezing the ceramic article; and then subjecting the frozen article to a vacuum for a sufficient time to freeze-dry the article. Frequently, the article is heated while being freeze-dried. Use of this method efficiently reduces the propensity for any warpage of the article. The article is often formed from a ceramic slurry in a gel-casting process. A method for fabricating a ceramic core used in investment casting is also described.

  11. Method for removing volatile components from a ceramic article, and related processes

    DOE Patents [OSTI]

    Klug, Frederic Joseph (Schenectady, NY); DeCarr, Sylvia Marie (Waterford, NY)

    2002-01-01

    A method of removing substantially all of the volatile component in a green, volatile-containing ceramic article is disclosed. The method comprises freezing the ceramic article; and then subjecting the frozen article to a vacuum for a sufficient time to freeze-dry the article. Frequently, the article is heated while being freeze-dried. Use of this method efficiently reduces the propensity for any warpage of the article. The article is often formed from a ceramic slurry in a gel-casting process. A method for fabricating a ceramic core used in investment casting is also described.

  12. Mesoscale simulations of particulate flows with parallel distributed

    Office of Scientific and Technical Information (OSTI)

    Lagrange multiplier technique (Journal Article) | SciTech Connect Journal Article: Mesoscale simulations of particulate flows with parallel distributed Lagrange multiplier technique Citation Details In-Document Search Title: Mesoscale simulations of particulate flows with parallel distributed Lagrange multiplier technique Authors: Kanarska, Y ; Lomov, I ; Antoun, T Publication Date: 2010-09-10 OSTI Identifier: 1120915 Report Number(s): LLNL-JRNL-455392 DOE Contract Number: W-7405-ENG-48

  13. Effects of fracture distribution and length scale on the equivalent

    Office of Scientific and Technical Information (OSTI)

    continuum elastic compliance of fractured rock masses (Journal Article) | SciTech Connect Journal Article: Effects of fracture distribution and length scale on the equivalent continuum elastic compliance of fractured rock masses Citation Details In-Document Search Title: Effects of fracture distribution and length scale on the equivalent continuum elastic compliance of fractured rock masses Authors: Gutierrez, Marte ; Youn, Dong-Joon Publication Date: 2015-12-01 OSTI Identifier: 1224355

  14. Catching the role of anisotropic electronic distribution and charge

    Office of Scientific and Technical Information (OSTI)

    transfer in halogen bonded complexes of noble gases (Journal Article) | SciTech Connect SciTech Connect Search Results Journal Article: Catching the role of anisotropic electronic distribution and charge transfer in halogen bonded complexes of noble gases Citation Details In-Document Search Title: Catching the role of anisotropic electronic distribution and charge transfer in halogen bonded complexes of noble gases The systems studied in this work are gas-phase weakly bound adducts of the

  15. Mesoscale simulations of particulate flows with parallel distributed

    Office of Scientific and Technical Information (OSTI)

    Lagrange multiplier technique (Journal Article) | SciTech Connect Journal Article: Mesoscale simulations of particulate flows with parallel distributed Lagrange multiplier technique Citation Details In-Document Search Title: Mesoscale simulations of particulate flows with parallel distributed Lagrange multiplier technique × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI)

  16. Self-Referenced Continuous-Variable Quantum Key Distribution Protocol

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect Self-Referenced Continuous-Variable Quantum Key Distribution Protocol Citation Details In-Document Search Title: Self-Referenced Continuous-Variable Quantum Key Distribution Protocol Authors: Soh, Daniel B. S. ; Brif, Constantin ; Coles, Patrick J. ; Lütkenhaus, Norbert ; Camacho, Ryan M. ; Urayama, Junji ; Sarovar, Mohan Publication Date: 2015-10-21 OSTI Identifier: 1224143 Grant/Contract Number: AC04-94AL85000 Type: Published Article Journal Name:

  17. Specificity and completion time distributions of biochemical processes

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect Journal Article: Specificity and completion time distributions of biochemical processes Citation Details In-Document Search Title: Specificity and completion time distributions of biochemical processes In order to produce specific complex structures from a large set of similar biochemical building blocks, many biochemical systems require high sensitivity to small molecular differences. The first and most common mqdel used to explain this high specificity

  18. MINEs: Open access databases of computationally predicted enzyme promiscuity products for untargeted metabolomics

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Jeffryes, James G.; Colastani, Ricardo L.; Elbadawi-Sidhu, Mona; Kind, Tobias; Niehaus, Thomas D.; Broadbelt, Linda J.; Hanson, Andrew D.; Fiehn, Oliver; Tyo, Keith E. J.; Henry, Christopher S.

    2015-08-28

    Metabolomics have proven difficult to execute in an untargeted and generalizable manner. Liquid chromatography–mass spectrometry (LC–MS) has made it possible to gather data on thousands of cellular metabolites. However, matching metabolites to their spectral features continues to be a bottleneck, meaning that much of the collected information remains uninterpreted and that new metabolites are seldom discovered in untargeted studies. These challenges require new approaches that consider compounds beyond those available in curated biochemistry databases. Here we present Metabolic In silico Network Expansions (MINEs), an extension of known metabolite databases to include molecules that have not been observed, but are likelymore » to occur based on known metabolites and common biochemical reactions. We utilize an algorithm called the Biochemical Network Integrated Computational Explorer (BNICE) and expert-curated reaction rules based on the Enzyme Commission classification system to propose the novel chemical structures and reactions that comprise MINE databases. Starting from the Kyoto Encyclopedia of Genes and Genomes (KEGG) COMPOUND database, the MINE contains over 571,000 compounds, of which 93% are not present in the PubChem database. However, these MINE compounds have on average higher structural similarity to natural products than compounds from KEGG or PubChem. MINE databases were able to propose annotations for 98.6% of a set of 667 MassBank spectra, 14% more than KEGG alone and equivalent to PubChem while returning far fewer candidates per spectra than PubChem (46 vs. 1715 median candidates). Application of MINEs to LC–MS accurate mass data enabled the identity of an unknown peak to be confidently predicted. MINE databases are freely accessible for non-commercial use via user-friendly web-tools at http://minedatabase.mcs.anl.gov and developer-friendly APIs. MINEs improve metabolomics peak identification as compared to general chemical databases whose results include irrelevant synthetic compounds. MINEs complement and expand on previous in silico generated compound databases that focus on human metabolism. We are actively developing the database; future versions of this resource will incorporate transformation rules for spontaneous chemical reactions and more advanced filtering and prioritization of candidate structures.« less

  19. MINEs: Open access databases of computationally predicted enzyme promiscuity products for untargeted metabolomics

    SciTech Connect (OSTI)

    Jeffryes, James G.; Colastani, Ricardo L.; Elbadawi-Sidhu, Mona; Kind, Tobias; Niehaus, Thomas D.; Broadbelt, Linda J.; Hanson, Andrew D.; Fiehn, Oliver; Tyo, Keith E. J.; Henry, Christopher S.

    2015-08-28

    Metabolomics have proven difficult to execute in an untargeted and generalizable manner. Liquid chromatography–mass spectrometry (LC–MS) has made it possible to gather data on thousands of cellular metabolites. However, matching metabolites to their spectral features continues to be a bottleneck, meaning that much of the collected information remains uninterpreted and that new metabolites are seldom discovered in untargeted studies. These challenges require new approaches that consider compounds beyond those available in curated biochemistry databases. Here we present Metabolic In silico Network Expansions (MINEs), an extension of known metabolite databases to include molecules that have not been observed, but are likely to occur based on known metabolites and common biochemical reactions. We utilize an algorithm called the Biochemical Network Integrated Computational Explorer (BNICE) and expert-curated reaction rules based on the Enzyme Commission classification system to propose the novel chemical structures and reactions that comprise MINE databases. Starting from the Kyoto Encyclopedia of Genes and Genomes (KEGG) COMPOUND database, the MINE contains over 571,000 compounds, of which 93% are not present in the PubChem database. However, these MINE compounds have on average higher structural similarity to natural products than compounds from KEGG or PubChem. MINE databases were able to propose annotations for 98.6% of a set of 667 MassBank spectra, 14% more than KEGG alone and equivalent to PubChem while returning far fewer candidates per spectra than PubChem (46 vs. 1715 median candidates). Application of MINEs to LC–MS accurate mass data enabled the identity of an unknown peak to be confidently predicted. MINE databases are freely accessible for non-commercial use via user-friendly web-tools at http://minedatabase.mcs.anl.gov and developer-friendly APIs. MINEs improve metabolomics peak identification as compared to general chemical databases whose results include irrelevant synthetic compounds. MINEs complement and expand on previous in silico generated compound databases that focus on human metabolism. We are actively developing the database; future versions of this resource will incorporate transformation rules for spontaneous chemical reactions and more advanced filtering and prioritization of candidate structures.

  20. EIA -Quarterly Coal Distribution

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    - Coal Distribution Home > Coal> Quarterly Coal Distribution Back Issues Quarterly Coal Distribution Archives Release Date: March 9, 2016 Next Release Date: May 2016 The Quarterly Coal Distribution Report (QCDR) provides detailed quarterly data on U.S. domestic coal distribution by coal origin, coal destination, mode of transportation and consuming sector. All data are preliminary and superseded by the final Coal Distribution - Annual Report. Year/Quarters By origin State By destination

  1. About Industrial Distributed Energy

    Broader source: Energy.gov [DOE]

    The Advanced Manufacturing Office's (AMO's) Industrial Distributed Energy activities build on the success of predecessor DOE programs on distributed energy and combined heat and power (CHP) while...

  2. Distribution Grid Integration

    Broader source: Energy.gov [DOE]

    The DOE Systems Integration team funds distribution grid integration research and development (R&D) activities to address the technical issues that surround distribution grid planning,...

  3. Coal Distribution Database, 2006

    U.S. Energy Information Administration (EIA) Indexed Site

    Domestic Distribution of U.S. Coal by Origin State, Consumer, Destination and Method of Transportation, 2009 Final February 2011 2 Overview of 2009 Coal Distribution Tables...

  4. Low Latency Messages on Distributed Memory Multiprocessors

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Rosing, Matt; Saltz, Joel

    1995-01-01

    This article describes many of the issues in developing an efficient interface for communication on distributed memory machines. Although the hardware component of message latency is less than 1 ws on many distributed memory machines, the software latency associated with sending and receiving typed messages is on the order of 50 μs. The reason for this imbalance is that the software interface does not match the hardware. By changing the interface to match the hardware more closely, applications with fine grained communication can be put on these machines. This article describes several tests performed and many of the issues involvedmore » in supporting low latency messages on distributed memory machines.« less

  5. ARM - Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    27, 2009 [Facility News, Feature Stories and Releases] Ceremony in the Azores Recognizes Scientific Collaborations Bookmark and Share A mix of green pastures and isolated white-housed villages dot the landscape of Graciosa Island. The ARM Mobile Facility will be located near the airport at the northern end of the island. In a signing ceremony at the Laboratorio Regional Engenharia Civil in Ponta Delgada, the Azores, government officials from the United States and Portugal formally recognized

  6. ARM - Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    October 14, 2009 [Facility News] Field Campaigns Selected for Fiscal Year 2011 Bookmark and Share Indian Landscape The Department of Energy recently announced the selection of three major campaigns that will be funded by the ARM Climate Research Facility in 2011. These campaigns-spanning the continental United States to India to the tropical Pacific Ocean-address major scientific uncertainties related to climate systems around the globe, and each includes significant international or interagency

  7. ARM - Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Begins Marine Cloud Study in the Azores Bookmark and Share Located next to the airport on Graciosa Island, the ARM Mobile Facility's comprehensive and sophisticated...

  8. RESEARCH ARTICLE

    Office of Scientific and Technical Information (OSTI)

    Successional Trajectories of Rhizosphere Bacterial Communities over Consecutive Seasons Shengjing Shi,a'b Erin Nuccio,a'c Donald J. Herman,a'd Ruud Rijkers,a Katerina Estera,a Jiabao Li,b Ulisses Nunes da Rocha,d Zhili He,b Jennifer Pett-Ridge,c Eoin L. Brodie,a'd Jizhong Zhou,b'd'e Mary Firestonea'd Department of EnvironmentalScience, Policy and Management, University of California, Berkeley, California, USAa; Department of Microbiology and Plant Biology, Institute for EnvironmentalGenomics,

  9. Featured Articles

    Office of Science (SC) Website

    Award. 8CC841F4-EA48-4038-BA00-09C81040C015http:1.usa.gov1kagbcv Flowing Toward Red Blood Cell Breakthroughs

  10. ARM - Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    27, 2009 [Facility News] Arrival of Recovery Act Funds Sets Wheels In Motion Bookmark and Share So that people can easily recognize the effects of the American Recovery and Reinvestment Act, all projects will be stamped with the Recovery Act logo. Through the American Recovery and Reinvestment Act of 2009 (aka stimulus), the Department of Energy's Office of Science received $1.2 billion. In late May, DOE released approximately $54 million-90 percent-of the $60 million allocated to the ARM

  11. ARM - Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6, 2010 [Facility News, Feature Stories and Releases] Ceilometer Represents First Deployment of New Ground-based Instruments from Recovery Act Bookmark and Share After a 3-day period of side-by-side operations and acceptance testing, the new CL31 ceilometer (foreground) officially replaced the older CT25K model on April 16, 2010 at the SGP site. After a 3-day period of side-by-side operations and acceptance testing, the new CL31 ceilometer (foreground) officially replaced the older CT25K model

  12. ARM - Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    August 26, 2010 [Facility News] User Facilities in Spotlight at Inaugural Office of Science Graduate Fellows Conference Bookmark and Share Office of Science director Dr. William Brinkman delivers his <em>Adventures in Science</em> address during the inaugural Graduate Fellows Conference. Photo courtesy Argonne National Laboratory. Office of Science director Dr. William Brinkman delivers his Adventures in Science address during the inaugural Graduate Fellows Conference. Photo courtesy

  13. ARM - Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    October 6, 2010 [Facility News] New Raman Lidar En Route to Australia Bookmark and Share Since 1996, the ARM Southern Great Plains site has maintained one of the few operational Raman lidars in the world. Now, thanks to funding from the American Recovery and Reinvestment Act, the ARM Tropical Western Pacific site is about to join that exclusive group. A new Raman lidar, built by Sandia National Laboratories in New Mexico, is on its way to Darwin, Australia. Optics contained inside the Raman

  14. RESEARCH ARTICLE

    Office of Scientific and Technical Information (OSTI)

    of the Basque government. This work was supported in part by the U.S Department of Energy under con- tract DE-AC02-06CH11357 and was completed with resources provided by the...

  15. ARM - Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    January 11, 2007 Facility News ARM Mobile Facility Moves to China in 2008 for Study of Aerosol Impacts on Climate Bookmark and Share Onshore winds and a mountain range to the...

  16. ARM - Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Announcements, Facility News Data Available from ARM Mobile Facility Deployment in China Bookmark and Share The Study of Aerosol Indirect Effects in China was anchored by the...

  17. RESEARCH ARTICLE

    Office of Scientific and Technical Information (OSTI)

    ... and preparation of precultures for cell adaptation in minimal medium. Growth assays were performed in M9 minimal medium, which consisted of 1X M9 salt (Difco), 2 mM MgSO4,100 ...

  18. Technical Articles

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    with new gene regulation tool The key is a tunable switch made from a small non-coding RNA molecule that could have value for medical and even biofuel production purposes.August 30...

  19. Annual Coal Distribution Report

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Annual Coal Distribution Report Release Date: April 16, 2015 | Next Release Date: March 2016 | full report | Revision/Correction Revision to the Annual Coal Distribution Report 2013 data The 2013 Annual Coal Distribution Report has been republished to include final 2013 electric power sector data as well as domestic and foreign distribution data. Contact:

  20. Mini-Guidance Articles from Lessons Learned Quarterly Reports, Dec. 1994 to

    Office of Environmental Management (EM)

    Sept. 2005 | Department of Energy Mini-Guidance Articles from Lessons Learned Quarterly Reports, Dec. 1994 to Sept. 2005 Mini-Guidance Articles from Lessons Learned Quarterly Reports, Dec. 1994 to Sept. 2005 The articles in this collection, organized by topic, contain procedural interpretations and recommendations developed by the DOE Office of NEPA Policy and Compliance in consultation with the Office of General Counsel, the DOE NEPA Community, and others. The mini-guidance articles were

  1. Estimating the spatio-temporal distribution of geochemical parameters

    Office of Scientific and Technical Information (OSTI)

    associated with biostimulation using spectral induced polarization data and hierarchical Bayesian models (Journal Article) | SciTech Connect Estimating the spatio-temporal distribution of geochemical parameters associated with biostimulation using spectral induced polarization data and hierarchical Bayesian models Citation Details In-Document Search Title: Estimating the spatio-temporal distribution of geochemical parameters associated with biostimulation using spectral induced polarization

  2. [Article 6 of 7]: Research on the Characteristics of a Smart...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... These DA applications can also be extended to coordinate customer applications such as demand-response (DR) and distributed energy resources (DER). And, distribution systems that ...

  3. Sample Employee Newsletter Articles for Plug-In Electric Vehicle Engagement

    Energy Savers [EERE]

    | Department of Energy Newsletter Articles for Plug-In Electric Vehicle Engagement Sample Employee Newsletter Articles for Plug-In Electric Vehicle Engagement These sample articles on plug-in electric vehicles (PEVs) can be customized and used in your employee newsletters, blog or intranet. Use these articles as-is with a credit to the U.S. Department of Energy or use them as a starter for developing your own content. Accompany articles with images from your archives or source content from

  4. Sandia Energy - Distribution Grid Integration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Distribution Grid Integration Home Stationary Power Energy Conversion Efficiency Solar Energy Photovoltaics Grid Integration Distribution Grid Integration Distribution Grid...

  5. Method of nitriding, carburizing, or oxidizing refractory metal articles using microwaves

    DOE Patents [OSTI]

    Holcombe, Cressie E. (Knoxville, TN); Dykes, Norman L. (Oak Ridge, TN); Tiegs, Terry N. (Lenoir City, TN)

    1992-01-01

    A method of nitriding an article of refractory-nitride-forming metal or metalloids. A consolidated metal or metalloid article is placed inside a microwave oven and nitrogen containing gas is introduced into the microwave oven. The metal or metalloid article is heated to a temperature sufficient to react the metal or metalloid with the nitrogen by applying a microwave energy within the microwave oven. The metal or metalloid article is maintained at that temperature for a period of time sufficient to convert the article of metal or metalloid to an article of refractory nitride. in addition, a method of applying a coating, such as a coating of an oxide, a carbide, or a carbo-nitride, to an article of metal or metalloid by microwave heating.

  6. Method of nitriding, carburizing, or oxidizing refractory metal articles using microwaves

    DOE Patents [OSTI]

    Holcombe, C.E.; Dykes, N.L.; Tiegs, T.N.

    1992-10-13

    A method of nitriding an article of refractory-nitride-forming metal or metalloids. A consolidated metal or metalloid article is placed inside a microwave oven and nitrogen containing gas is introduced into the microwave oven. The metal or metalloid article is heated to a temperature sufficient to react the metal or metalloid with the nitrogen by applying a microwave energy within the microwave oven. The metal or metalloid article is maintained at that temperature for a period of time sufficient to convert the article of metal or metalloid to an article of refractory nitride. in addition, a method of applying a coating, such as a coating of an oxide, a carbide, or a carbo-nitride, to an article of metal or metalloid by microwave heating.

  7. Microscopic modeling of mass and charge distributions in the spontaneous

    Office of Scientific and Technical Information (OSTI)

    fission of 240Pu (Journal Article) | SciTech Connect Microscopic modeling of mass and charge distributions in the spontaneous fission of 240Pu Citation Details In-Document Search This content will become publicly available on January 20, 2017 Title: Microscopic modeling of mass and charge distributions in the spontaneous fission of 240Pu We propose a methodology to calculate microscopically the mass and charge distributions of spontaneous fission yields. We combine the multidimensional

  8. QCD Prediction for Heavy Boson Transverse Momentum Distributions (Journal

    Office of Scientific and Technical Information (OSTI)

    Article) | SciTech Connect QCD Prediction for Heavy Boson Transverse Momentum Distributions Citation Details In-Document Search Title: QCD Prediction for Heavy Boson Transverse Momentum Distributions We investigate the predictive power of the Collins, Soper, and Sterman b -space QCD resummation formalism for transverse momentum (Q{sub T}) distributions of heavy boson production in hadronic collisions. We show that the predictive power has a strong dependence on the collision energy S in

  9. Characterization of fluid distributions in porous media by NMR techniques

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect Characterization of fluid distributions in porous media by NMR techniques Citation Details In-Document Search Title: Characterization of fluid distributions in porous media by NMR techniques The characterization of pore structures and fluid phase distributions in porous media is of fundamental importance for accurate evaluation of reservoir resources and petroleum recovery as well as for environmental remediation and many chemical engineering processes.

  10. Temperature distribution and fluid flow in an enclosure with localized

    Office of Scientific and Technical Information (OSTI)

    heating and cooling (Journal Article) | SciTech Connect Temperature distribution and fluid flow in an enclosure with localized heating and cooling Citation Details In-Document Search Title: Temperature distribution and fluid flow in an enclosure with localized heating and cooling Preliminary experimental results are reported for a temperature distribution inside a water filled cubicle enclosure. The enclosure is subjected to a localized heating and cooling of the same wall where a heater

  11. Doubly Distributed Transactions

    Energy Science and Technology Software Center (OSTI)

    2014-08-25

    Doubly Distributed Transactions (D2T) offers a technique for managing operations from a set of parallel clients with a collection of distributed services. It detects and manages faults. Example code with a test harness is also provided

  12. Distributed Wind 2015

    Broader source: Energy.gov [DOE]

    Distributed Wind 2015 is committed to the advancement of both distributed and community wind energy. This two day event includes a Business Conference with sessions focused on advancing the...

  13. What is Distributed Wind?

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Distributed Wind? Distributed wind energy systems are commonly installed on residential, agricultural, commercial, institutional, and industrial sites connected either physically or virtually on the customer side of the meter (to serve on-site load) or directly to the local distribution or micro grid (to support local grid operations or offset nearby loads). Because the definition is based on a wind project's location relative to end-use and power-distribution infrastructure, rather than on

  14. Method and composition for molding low density desiccant syntactic foam articles

    DOE Patents [OSTI]

    Lula, James W. (Bonner Springs, KS); Schicker, James R. (Lee's Summit, MO)

    1984-01-01

    A method and a composition are provided for molding low density desiccant syntactic foam articles. A low density molded desiccant article may be made as a syntactic foam by blending a thermosetting resin, microspheres and molecular sieve desiccant powder, molding and curing. Such articles have densities of 0.2-0.9 g/cc, moisture capacities of 1-12% by weight, and can serve as light weight structural supports.

  15. Lossy compression of weak lensing data (Journal Article) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Lossy compression of weak lensing data Citation Details In-Document Search Title: Lossy compression of weak lensing data Future orbiting observatories will survey...

  16. The DEAP/CLEAN Dark Matter Search (Journal Article) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: The DEAPCLEAN Dark Matter Search Citation ... of particle and nuclear physics, San Diego, CA ... International Atomic Energy Agency (IAEA) Country of ...

  17. SF 6431-E;ARTICLES FOR PROCESS AND FABRICATION LABORATORY PROCUREMENT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (7-2013) Supersedes (4-2000) issue Procurement Center Albuquerque, New Mexico 87185 ARTICLES FOR PROCESS AND FABRICATION LABORATORY PROCUREMENT 1. GENERAL PRODUCT and INSPECTION...

  18. WIMPs at the galactic center (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Publication Date: 2015-05-07 OSTI Identifier: 22454546 Resource Type: Journal Article Resource Relation: Journal Name: Journal of Cosmology and Astroparticle Physics; Journal ...

  19. Polycrystalline ferroelectric or multiferroic oxide articles on biaxially textured substrates and methods for making same

    DOE Patents [OSTI]

    Goyal, Amit; Shin, Junsoo

    2015-03-31

    A polycrystalline ferroelectric and/or multiferroic oxide article includes a substrate having a biaxially textured surface; at least one biaxially textured buffer layer supported by the substrate; and a biaxially textured ferroelectric or multiferroic oxide layer supported by the buffer layer. Methods for making polycrystalline ferroelectric and/or multiferroic oxide articles are also disclosed.

  20. Coal Distribution Database, 2006

    U.S. Energy Information Administration (EIA) Indexed Site

    TF RailroadVesselShip Fuel It is also noted that Destination State code of "X Export" indicates movements to foreign destinations. 1 68 Domestic Coal Distribution...

  1. Distribution of Correspondence

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1996-08-30

    Defines correct procedures for distribution of correspondence to the Naval Reactors laboratories. Does not cancel another directive. Expired 8-30-97.

  2. Cooling water distribution system

    DOE Patents [OSTI]

    Orr, Richard

    1994-01-01

    A passive containment cooling system for a nuclear reactor containment vessel. Disclosed is a cooling water distribution system for introducing cooling water by gravity uniformly over the outer surface of a steel containment vessel using an interconnected series of radial guide elements, a plurality of circumferential collector elements and collector boxes to collect and feed the cooling water into distribution channels extending along the curved surface of the steel containment vessel. The cooling water is uniformly distributed over the curved surface by a plurality of weirs in the distribution channels.

  3. Annual Coal Distribution Tables

    U.S. Energy Information Administration (EIA) Indexed Site

    Domestic Distribution of U.S. Coal by Destination State, Consumer, Destination and Method of Transportation, 2001 (Thousand Short Tons) DESTINATION: Alabama State of Origin by...

  4. Coal Distribution Database, 2006

    U.S. Energy Information Administration (EIA) Indexed Site

    Report - Annual provides detailed information on domestic coal distribution by origin state, destination state, consumer category, and method of transportation. Also provided is...

  5. Distribution Grid Integration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Carbide Thyristors Read More Permalink ECIS-Princeton Power Systems, Inc.: Demand Response Inverter DETL, Distribution Grid Integration, Energy, Energy Surety, Facilities, ...

  6. The effect of climate change, population distribution, and climate

    Office of Scientific and Technical Information (OSTI)

    mitigation on building energy use in the U.S. and China (Journal Article) | SciTech Connect SciTech Connect Search Results Journal Article: The effect of climate change, population distribution, and climate mitigation on building energy use in the U.S. and China Citation Details In-Document Search Title: The effect of climate change, population distribution, and climate mitigation on building energy use in the U.S. and China A changing climate will affect the energy system in a number of

  7. Coating formulation and method for refinishing the surface of surface-damaged graphite articles

    DOE Patents [OSTI]

    Ardary, Z.L.; Benton, S.T.

    1987-07-08

    The described development is directed to a coating formulation for filling surface irregularities in graphite articles such as molds, crucibles, and matched die sets used in high-temperature metallurgical operations. The coating formulation of the present invention is formed of carbon black flour, thermosetting resin and a solvent for the resin. In affixing the coating to the article, the solvent is evaporated, the resin cured to bond the coating to the surface of the article and then pyrolyzed to convert the resin to carbon. Upon completion of the pyrolysis step, the coating is shaped and polished to provide the article with a surface restoration that is essentially similar to the original or desired surface finish without the irregularity.

  8. "Stimulating Smart Grid": SGIG article in EnergyBiz, Sep/Oct 2012

    Office of Energy Efficiency and Renewable Energy (EERE)

    The bimonthly magazine EnergyBiz is an award-winning resource for information and analysis of trends and strategies in the industry. The September/October 2012 issue featured an article on DOE's...

  9. Nuclear data needs for NW (u) (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Nuclear data needs for NW (u) Citation Details In-Document Search Title: Nuclear data needs for NW (u) You are accessing a document from the Department of...

  10. J/psi Production in Quark-Gluon Plasma (Journal Article) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    DOE Contract Number: DE-AC02-05CH11231 Resource Type: Journal Article Resource Relation: Journal Name: Physical Review Letters; Journal Volume: 97; Journal Issue: 23; Related ...

  11. Apparatus for and method of performing spectroscopic analysis on an article

    DOE Patents [OSTI]

    Powell, George Louis (Oak Ridge, TN); Hallman, Jr., Russell Louis (Knoxville, TN)

    1999-01-01

    An apparatus for and method of analyzing an article having an entrance and an exit in communication with the entrance. The apparatus comprises: a spectrometer having an emission source with a focal point; a plurality of mirrors; and a detector connected to the spectroscope. The emission source is positioned so that its focal point is substantially coextensive with the entrance of the article. The mirrors comprise: a first mirror positionable adjacent the exit of the article and a second mirror positioned relative to the other of said plurality of mirrors. The first mirror receives scattered emissions exiting the article and substantially collimates the scattered emissions. The second mirror substantially focuses the collimated emissions into a focused emission. The detector receives the focused emission from the mirrors.

  12. Apparatus for and method of performing spectroscopic analysis on an article

    DOE Patents [OSTI]

    Powell, G.L.; Hallman, R.L. Jr.

    1999-04-20

    An apparatus and method are disclosed for analyzing an article having an entrance and an exit in communication with the entrance. The apparatus comprises: a spectrometer having an emission source with a focal point; a plurality of mirrors; and a detector connected to the spectroscope. The emission source is positioned so that its focal point is substantially coextensive with the entrance of the article. The mirrors comprise: a first mirror positionable adjacent the exit of the article and a second mirror positioned relative to the other of said plurality of mirrors. The first mirror receives scattered emissions exiting the article and substantially collimates the scattered emissions. The second mirror substantially focuses the collimated emissions into a focused emission. The detector receives the focused emission from the mirrors. 6 figs.

  13. Method of reducing the green density of a slip cast article

    DOE Patents [OSTI]

    Mangels, John A. (Flat Rock, MI); Dickie, Ray A. (Birmingham, MI)

    1985-01-01

    The method disclosed in this specification is one of reducing the green density of an article cast in a slip casting operation. The article is cast from a casting slip containing silicon metal particles, yttrium containing particles, and a small amount of a fluoride salt which is effective to suppress flocculation of the silicon metal particles by y.sup.+3 ions derived from the yttrium containing particles. The method is characterized by the following step. A small amount of compound which produces a cation which will partly flocculate the particles of silicon metal is added to the casting slip. The small amount of this compound is added so that when the casting slip is slip cast into a casting mold, the partly flocculated particles of silicon will interrupt an otherwise orderly packing of the particles of silicon and particles of yttrium. In this manner, the green density of the slip cast article is reduced and the article may be more easily nitrided.

  14. Coating formulation and method for refinishing the surface of surface-damaged graphite articles

    DOE Patents [OSTI]

    Ardary, Z.L.; Benton, S.T.

    1988-11-22

    The described development is directed to a coating formulation for filling surface irregularities in graphite articles such as molds, crucibles, and matched die sets used in high-temperature metallurgical operations. The coating formulation of the present invention is formed of carbon black flour, thermosetting resin and a solvent for the resin. In affixing the coating to the article, the solvent is evaporated, the resin cured to bond the coating to the surface of the article and then pyrolyzed to convert the resin to carbon. Upon completion of the pyrolysis step, the coating is shaped and polished to provide the article with a surface restoration that is essentially similar to the original or desired surface finish without the irregularity.

  15. Coating formulation and method for refinishing the surface of surface-damaged graphite articles

    DOE Patents [OSTI]

    Ardary, Zane L. (Lenoir City, TN); Benton, Samuel T. (Knoxville, TN)

    1988-01-01

    The described development is directed to a coating formulation for filling surface irregularities in graphite articles such as molds, crucibles, and matched die sets used in high-temperature metallurgical operations. The coating formulation of the present invention is formed of carbon black flour, thermosetting resin and a solvent for the resin. In affixing the coating to the article, the solvent is evaporated, the resin cured to bond the coating to the surface of the article and then pyrolyzed to convert the resin to carbon. Upon completion of the pyrolysis step, the coating is shaped and polished to provide the article with a surface restoration that is essentially similar to the original or desired surface finish without the irregularity.

  16. 2 CCR State Lands Commission Article 4.1, Leases for Exploration...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: 2 CCR State Lands Commission Article 4.1, Leases for Exploration and Development of...

  17. Process for forming a chromium diffusion portion and articles made therefrom

    DOE Patents [OSTI]

    Helmick, David Andrew; Cavanaugh, Dennis William; Feng, Ganjiang; Bucci, David Vincent

    2015-12-29

    In one embodiment, a method for forming an article with a diffusion portion comprises: forming a slurry comprising chromium and silicon, applying the slurry to the article, and heating the article to a sufficient temperature and for a sufficient period of time to diffuse chromium and silicon into the article and form a diffusion portion comprising silicon and a microstructure comprising .alpha.-chromium. In one embodiment, a gas turbine component comprises: a superalloy and a diffusion portion having a depth of less than or equal to 60 .mu.m measured from the superalloy surface into the gas turbine component. The diffusion portion has a diffusion surface having a microstructure comprising greater than or equal to 40% by volume .alpha.-chromium.

  18. Progress towards steady state on NSTX (Journal Article) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Number(s): UCRL-JRNL-221039 DOE Contract Number: W-7405-ENG-48 Resource Type: Journal Article Resource Relation: Journal Name: Nuclear Fusion, vol. 46, na, May 3, 2006, S22-S28...

  19. Lipid phase control of DNA delivery (Journal Article) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Search Results Journal Article: Lipid phase control of DNA delivery Citation Details In-Document Search Title: Lipid phase control of DNA delivery Cationic lipids ...

  20. Proteolytic Processing of ErbB4 in Breast Cancer (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Proteolytic Processing of ErbB4 in Breast Cancer Citation Details In-Document Search Title: Proteolytic Processing of ErbB4 in Breast Cancer Authors: Hollmen, Maija ...

  1. EXAFS Analysis of UF4 (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Journal Article: EXAFS Analysis of UF4 Citation Details In-Document Search Title: EXAFS Analysis of UF4 You are accessing a document from the Department of Energy's (DOE)...

  2. Nondestructive method and apparatus for imaging grains in curved surfaces of polycrystalline articles

    DOE Patents [OSTI]

    Carpenter, Donald A. (Lenior City, TN)

    1995-01-01

    A nondestructive method, and associated apparatus, are provided for determining the grain flow of the grains in a convex curved, textured polycrystalline surface. The convex, curved surface of a polycrystalline article is aligned in a horizontal x-ray diffractometer and a monochromatic, converging x-ray beam is directed onto the curved surface of the polycrystalline article so that the converging x-ray beam is diffracted by crystallographic planes of the grains in the polycrystalline article. The diffracted x-ray beam is caused to pass through a set of horizontal, parallel slits to limit the height of the beam and thereafter. The linear intensity of the diffracted x-ray is measured, using a linear position sensitive proportional counter, as a function of position in a direction orthogonal to the counter so as to generate two dimensional data. An image of the grains in the curved surface of the polycrystalline article is provided based on the two-dimensional data.

  3. Magnetocaloric effect of Pr2Fe17-x Mn x alloys (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Search Results Journal Article: Magnetocaloric effect of Pr2Fe17-x Mn x alloys Citation Details In-Document Search Title: Magnetocaloric effect of Pr2Fe17-x Mn x ...

  4. Note: Heated flyer-plate impact system. (Journal Article) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    OSTI Identifier: 1146882 Report Number(s): SAND2014-4890J Journal ID: ISSN 0034--6748; 521250 DOE Contract Number: DE-AC04-94AL85000 Resource Type: Journal Article Resource ...

  5. Process for forming a chromium diffusion portion and articles made therefrom

    DOE Patents [OSTI]

    Helmick, David Andrew; Cavanaugh, Dennis William; Feng, Ganjiang; Bucci, David Vincent

    2012-09-11

    In one embodiment, a method for forming an article with a diffusion portion comprises: forming a slurry comprising chromium and silicon, applying the slurry to the article, and heating the article to a sufficient temperature and for a sufficient period of time to diffuse chromium and silicon into the article and form a diffusion portion comprising silicon and a microstructure comprising .alpha.-chromium. In one embodiment, a gas turbine component comprises: a superalloy and a diffusion portion having a depth of less than or equal to 60 .mu.m measured from the superalloy surface into the gas turbine component. The diffusion portion has a diffusion surface having a microstructure comprising greater than or equal to 40% by volume .alpha.-chromium.

  6. Nuclear data needs for NW (u) (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Nuclear data needs for NW (u) Citation Details In-Document Search Title: Nuclear data needs for NW (u) Authors: Chadwick, Mark B [1] + Show Author Affiliations Los Alamos National Laboratory Publication Date: 2012-02-02 OSTI Identifier: 1150699 Report Number(s): LA-UR-12-00598; LA-UR-12-598 DOE Contract Number: AC52-06NA25396 Resource Type: Journal Article

  7. Laminate articles on biaxially textured metal substrates (Patent) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect Patent: Laminate articles on biaxially textured metal substrates Citation Details In-Document Search Title: Laminate articles on biaxially textured metal substrates × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service. Visit OSTI to utilize additional information resources in energy science and technology. A paper copy of this

  8. Optical Third-Harmonic Generation in Graphene (Journal Article) | DOE PAGES

    Office of Scientific and Technical Information (OSTI)

    Published Article: Optical Third-Harmonic Generation in Graphene Title: Optical Third-Harmonic Generation in Graphene Authors: Hong, Sung-Young ; Dadap, Jerry I. ; Petrone, Nicholas ; Yeh, Po-Chun ; Hone, James ; Osgood, Richard M. Publication Date: 2013-06-10 OSTI Identifier: 1102835 Type: Published Article Journal Name: Physical Review X Additional Journal Information: Journal Volume: 3; Journal Issue: 2; Journal ID: ISSN 2160-3308 Publisher: American Physical Society Sponsoring Org: USDOE

  9. Distribution Workshop | Department of Energy

    Office of Environmental Management (EM)

    Variable distributed generation Dispatchable distributed generation Electric vehicle charging and electrolyzers Energy storage Building and industrial loads and demand response ...

  10. WINDExchange: Distributed Wind

    Wind Powering America (EERE)

    Distributed Wind Photo of a small wind turbine next to a farm house with a colorful sunset in the background. The distributed wind market includes wind turbines and projects of many sizes, from small wind turbines less than 1 kilowatt (kW) to multi-megawatt wind farms. The term "distributed wind" describes off-grid or grid-connected wind turbines at homes, farms and ranches, businesses, public and industrial facilities, and other sites. The turbines can provide all of the power used at

  11. Molecular Weight Distributions of Irradiated Siloxane-Based Elastomers: A

    Office of Scientific and Technical Information (OSTI)

    Complementary Study by Statistical Modeling and Multiple Quantum Nuclear Magnetic Resonance. (Journal Article) | SciTech Connect Molecular Weight Distributions of Irradiated Siloxane-Based Elastomers: A Complementary Study by Statistical Modeling and Multiple Quantum Nuclear Magnetic Resonance. Citation Details In-Document Search Title: Molecular Weight Distributions of Irradiated Siloxane-Based Elastomers: A Complementary Study by Statistical Modeling and Multiple Quantum Nuclear Magnetic

  12. New parton distribution functions from a global analysis of quantum

    Office of Scientific and Technical Information (OSTI)

    chromodynamics (Journal Article) | SciTech Connect New parton distribution functions from a global analysis of quantum chromodynamics Citation Details In-Document Search This content will become publicly available on February 15, 2017 Title: New parton distribution functions from a global analysis of quantum chromodynamics Authors: Dulat, Sayipjamal ; Hou, Tie-Jiun ; Gao, Jun ; Guzzi, Marco ; Huston, Joey ; Nadolsky, Pavel ; Pumplin, Jon ; Schmidt, Carl ; Stump, Daniel ; Yuan, C.-P.

  13. Novel seed coat lignins in the Cactaceae: structure, distribution and

    Office of Scientific and Technical Information (OSTI)

    implications for the evolution of lignin diversity (Journal Article) | SciTech Connect Novel seed coat lignins in the Cactaceae: structure, distribution and implications for the evolution of lignin diversity Citation Details In-Document Search Title: Novel seed coat lignins in the Cactaceae: structure, distribution and implications for the evolution of lignin diversity Authors: Fang,Chen ; Yuki,Tobimatsu ; Lisa,Jackson ; Jin,Nakashima ; John,Ralph ; Richard A.,Dixon Publication Date:

  14. Novel seed coat lignins in the Cactaceae: structure, distribution and

    Office of Scientific and Technical Information (OSTI)

    implications for the evolution of lignin diversity (Journal Article) | SciTech Connect Novel seed coat lignins in the Cactaceae: structure, distribution and implications for the evolution of lignin diversity Citation Details In-Document Search Title: Novel seed coat lignins in the Cactaceae: structure, distribution and implications for the evolution of lignin diversity Authors: Fang,Chen ; Yuki,Tobimatsu ; Lisa,Jackson ; Jin,Nakashima ; John,Ralph ; Richard A.,Dixon Publication Date:

  15. Spatial and Temporal Patterns of Global Onshore Wind Speed Distribution

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect Spatial and Temporal Patterns of Global Onshore Wind Speed Distribution Citation Details In-Document Search Title: Spatial and Temporal Patterns of Global Onshore Wind Speed Distribution Wind power, a renewable energy source, can play an important role in electrical energy generation. Information regarding wind energy potential is important both for energy related modeling and for decision-making in the policy community. While wind speed datasets with high

  16. Broad Distribution of Energetically Important Contacts across an Extended

    Office of Scientific and Technical Information (OSTI)

    Protein Interface (Journal Article) | SciTech Connect Broad Distribution of Energetically Important Contacts across an Extended Protein Interface Citation Details In-Document Search Title: Broad Distribution of Energetically Important Contacts across an Extended Protein Interface Infection of cells by HIV depends upon profound structural rearrangements within the trimeric viral protein gp41. Critical to this process is the formation of a six-helix bundle in which a set of three N-terminal

  17. Distributed Energy Resource Program

    Broader source: Energy.gov [DOE]

    Note: A series of orders issued on July 15, 2015 in  Docket 2015-53-E, Docket 2015-54-E, and Docket 2015-55-E approved the incentive programs for South Carolina's Distributed Energy Resource...

  18. Coal Distribution Database, 2008

    U.S. Energy Information Administration (EIA) Indexed Site

    4Q 2009 April 2010 Quarterly Coal Distribution Table Format and Data Sources 4Q 2009 In keeping with EIA's efforts to increase the timeliness of its reports, this Quarterly Coal...

  19. Coal Distribution Database, 2008

    U.S. Energy Information Administration (EIA) Indexed Site

    3Q 2009 February 2010 Quarterly Coal Distribution Table Format and Data Sources 3Q 2009 In keeping with EIA's efforts to increase the timeliness of its reports, this Quarterly Coal...

  20. Distributed Wind Energy Workshop

    Broader source: Energy.gov [DOE]

    Join instructor Brent Summerville for a fun and interactive workshop at Appalachian State University's Small Wind Research and Demonstration Site. Learn about a variety of distributed wind energy...

  1. Domestic and Foreign Distribution

    U.S. Energy Information Administration (EIA) Indexed Site

    of U.S. Coal by State of Origin, 2008 Final May 2010 Domestic and Foreign Distribution of U.S. Coal by State of Origin, 2008 (Thousand Short Tons) State Region Domestic Foreign...

  2. Scholarly context not found: One in five articles suffers from reference rot

    SciTech Connect (OSTI)

    Klein, Martin; Van de Sompel, Herbert; Sanderson, Robert; Shankar, Harihar; Balakireva, Lyudmila; Zhou, Ke; Tobin, Richard; Bar-Ilan, Judit

    2014-12-26

    The emergence of the web has fundamentally affected most aspects of information communication, including scholarly communication. The immediacy that characterizes publishing information to the web, as well as accessing it, allows for a dramatic increase in the speed of dissemination of scholarly knowledge. But, the transition from a paper-based to a web-based scholarly communication system also poses challenges. In this paper, we focus on reference rot, the combination of link rot and content drift to which references to web resources included in Science, Technology, and Medicine (STM) articles are subject. We investigate the extent to which reference rot impacts the ability to revisit the web context that surrounds STM articles some time after their publication. We do so on the basis of a vast collection of articles from three corpora that span publication years 1997 to 2012. For over one million references to web resources extracted from over 3.5 million articles, we determine whether the HTTP URI is still responsive on the live web and whether web archives contain an archived snapshot representative of the state the referenced resource had at the time it was referenced. We observe that the fraction of articles containing references to web resources is growing steadily over time. We find one out of five STM articles suffering from reference rot, meaning it is impossible to revisit the web context that surrounds them some time after their publication. When only considering STM articles that contain references to web resources, this fraction increases to seven out of ten.

  3. Scholarly context not found: One in five articles suffers from reference rot

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Klein, Martin; Van de Sompel, Herbert; Sanderson, Robert; Shankar, Harihar; Balakireva, Lyudmila; Zhou, Ke; Tobin, Richard; Bar-Ilan, Judit

    2014-12-26

    The emergence of the web has fundamentally affected most aspects of information communication, including scholarly communication. The immediacy that characterizes publishing information to the web, as well as accessing it, allows for a dramatic increase in the speed of dissemination of scholarly knowledge. But, the transition from a paper-based to a web-based scholarly communication system also poses challenges. In this paper, we focus on reference rot, the combination of link rot and content drift to which references to web resources included in Science, Technology, and Medicine (STM) articles are subject. We investigate the extent to which reference rot impacts themore » ability to revisit the web context that surrounds STM articles some time after their publication. We do so on the basis of a vast collection of articles from three corpora that span publication years 1997 to 2012. For over one million references to web resources extracted from over 3.5 million articles, we determine whether the HTTP URI is still responsive on the live web and whether web archives contain an archived snapshot representative of the state the referenced resource had at the time it was referenced. We observe that the fraction of articles containing references to web resources is growing steadily over time. We find one out of five STM articles suffering from reference rot, meaning it is impossible to revisit the web context that surrounds them some time after their publication. When only considering STM articles that contain references to web resources, this fraction increases to seven out of ten.« less

  4. Distributed generation hits market

    SciTech Connect (OSTI)

    1997-10-01

    The pace at which vendors are developing and marketing gas turbines and reciprocating engines for small-scale applications may signal the widespread growth of distributed generation. Loosely defined to refer to applications in which power generation equipment is located close to end users who have near-term power capacity needs, distributed generation encompasses a broad range of technologies and load requirements. Disagreement is inevitable, but many industry observers associate distributed generation with applications anywhere from 25 kW to 25 MW. Ten years ago, distributed generation users only represented about 2% of the world market. Today, that figure has increased to about 4 or 5%, and probably could settle in the 20% range within a 3-to-5-year period, according to Michael Jones, San Diego, Calif.-based Solar Turbines Inc. power generation marketing manager. The US Energy Information Administration predicts about 175 GW of generation capacity will be added domestically by 2010. If 20% comes from smaller plants, distributed generation could account for about 35 GW. Even with more competition, it`s highly unlikely distributed generation will totally replace current market structures and central stations. Distributed generation may be best suited for making market inroads when and where central systems need upgrading, and should prove its worth when the system can`t handle peak demands. Typical applications include small reciprocating engine generators at remote customer sites or larger gas turbines to boost the grid. Additional market opportunities include standby capacity, peak shaving, power quality, cogeneration and capacity rental for immediate demand requirements. Integration of distributed generation systems--using gas-fueled engines, gas-fired combustion engines and fuel cells--can upgrade power quality for customers and reduce operating costs for electric utilities.

  5. Distributed Control of Inverter-Based Lossy Microgrids for Power Sharing

    Office of Scientific and Technical Information (OSTI)

    and Frequency Regulation Under Voltage Constraints (Journal Article) | SciTech Connect Distributed Control of Inverter-Based Lossy Microgrids for Power Sharing and Frequency Regulation Under Voltage Constraints Citation Details In-Document Search Title: Distributed Control of Inverter-Based Lossy Microgrids for Power Sharing and Frequency Regulation Under Voltage Constraints This paper presents a new distributed control framework to coordinate inverter-interfaced distributed energy resources

  6. SU-E-CAMPUS-T-03: Four-Dimensional Dose Distribution Measurement Using

    Office of Scientific and Technical Information (OSTI)

    Plastic Scintillator (Journal Article) | SciTech Connect SU-E-CAMPUS-T-03: Four-Dimensional Dose Distribution Measurement Using Plastic Scintillator Citation Details In-Document Search Title: SU-E-CAMPUS-T-03: Four-Dimensional Dose Distribution Measurement Using Plastic Scintillator Purpose: To develop the detector for the four-dimensional dose distribution measurement. Methods: We made the prototype detector for four-dimensional dose distribution measurement using a cylindrical plastic

  7. Reclaiming metallic material from an article comprising a non-metallic friable substrate

    DOE Patents [OSTI]

    Bohland, John Raphael (Oregon, OH); Anisimov, Igor Ivanovich (Whitehouse, OH); Dapkus, Todd James (Toledo, OH); Sasala, Richard Anthony (Toledo, OH); Smigielski, Ken Alan (Toledo, OH); Kamm, Kristin Danielle (Swanton, OH)

    2000-01-01

    A method for reclaiming a metallic material from a article including a non-metallic friable substrate. The method comprising crushing the article into a plurality of pieces. An acidic solution capable of dissolving the metallic material is provided dissolving the metallic material in the acidic material to form an etchant effluent. The etchant effluent is separated from the friable substrate. A precipitation agent, capable of precipitating the metallic material, is added to the etchant effluent to precipitate out the metallic material from the etchant effluent. The metallic material is then recovered.

  8. Recent Results on Meson Spectroscopy from BELLE And BaBar (Journal Article)

    Office of Scientific and Technical Information (OSTI)

    | SciTech Connect Journal Article: Recent Results on Meson Spectroscopy from BELLE And BaBar Citation Details In-Document Search Title: Recent Results on Meson Spectroscopy from BELLE And BaBar Authors: Uehara, Sadaharu ; /KEK, Tsukuba Publication Date: 2013-05-31 OSTI Identifier: 1081533 Report Number(s): SLAC-REPRINT-2013-079 DOE Contract Number: AC02-76SF00515 Resource Type: Journal Article Resource Relation: Journal Name: Int.J.Mod.Phys.A26:341-346,2011 Research Org: SLAC National

  9. The New Look pMSSM with Neutralino and Gravitino LSPs (Journal Article) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Journal Article: The New Look pMSSM with Neutralino and Gravitino LSPs Citation Details In-Document Search Title: The New Look pMSSM with Neutralino and Gravitino LSPs Authors: Cahill-Rowley, Matthew W. ; Hewett, JoAnne L. ; Hoeche, Stefan ; Ismail, Ahmed ; Rizzo, Thomas G. ; /SLAC ; , Publication Date: 2013-10-28 OSTI Identifier: 1098111 Report Number(s): SLAC-PUB-14922 arXiv:1206.4321 DOE Contract Number: AC02-76SF00515 Resource Type: Journal Article Resource Relation:

  10. pMSSM Benchmark Models for Snowmass 2013 (Journal Article) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect Journal Article: pMSSM Benchmark Models for Snowmass 2013 Citation Details In-Document Search Title: pMSSM Benchmark Models for Snowmass 2013 Authors: Cahill-Rowley, Matthew W. ; Hewett, JoAnne L. ; Ismail, Ahmed ; Peskin, Michael E. ; Rizzo, Thomas G. Publication Date: 2013-07-01 OSTI Identifier: 1086969 Report Number(s): SLAC-PUB-15458 arXiv:1305.2419 DOE Contract Number: AC02-76SF00515 Resource Type: Journal Article Resource Relation: Journal Name: arXiv:1305.2419 Research Org:

  11. Interoperable PKI Data Distribution in Computational Grids

    SciTech Connect (OSTI)

    Pala, Massimiliano; Cholia, Shreyas; Rea, Scott A.; Smith, Sean W.

    2008-07-25

    One of the most successful working examples of virtual organizations, computational grids need authentication mechanisms that inter-operate across domain boundaries. Public Key Infrastructures(PKIs) provide sufficient flexibility to allow resource managers to securely grant access to their systems in such distributed environments. However, as PKIs grow and services are added to enhance both security and usability, users and applications must struggle to discover available resources-particularly when the Certification Authority (CA) is alien to the relying party. This article presents how to overcome these limitations of the current grid authentication model by integrating the PKI Resource Query Protocol (PRQP) into the Grid Security Infrastructure (GSI).

  12. Distributed data transmitter

    DOE Patents [OSTI]

    Brown, Kenneth Dewayne (Grain Valley, MO); Dunson, David (Kansas City, MO)

    2008-06-03

    A distributed data transmitter (DTXR) which is an adaptive data communication microwave transmitter having a distributable architecture of modular components, and which incorporates both digital and microwave technology to provide substantial improvements in physical and operational flexibility. The DTXR has application in, for example, remote data acquisition involving the transmission of telemetry data across a wireless link, wherein the DTXR is integrated into and utilizes available space within a system (e.g., a flight vehicle). In a preferred embodiment, the DTXR broadly comprises a plurality of input interfaces; a data modulator; a power amplifier; and a power converter, all of which are modularly separate and distinct so as to be substantially independently physically distributable and positionable throughout the system wherever sufficient space is available.

  13. Distributed data transmitter

    DOE Patents [OSTI]

    Brown, Kenneth Dewayne (Grain Valley, MO); Dunson, David (Kansas City, MO)

    2006-08-08

    A distributed data transmitter (DTXR) which is an adaptive data communication microwave transmitter having a distributable architecture of modular components, and which incorporates both digital and microwave technology to provide substantial improvements in physical and operational flexibility. The DTXR has application in, for example, remote data acquisition involving the transmission of telemetry data across a wireless link, wherein the DTXR is integrated into and utilizes available space within a system (e.g., a flight vehicle). In a preferred embodiment, the DTXR broadly comprises a plurality of input interfaces; a data modulator; a power amplifier; and a power converter, all of which are modularly separate and distinct so as to be substantially independently physically distributable and positionable throughout the system wherever sufficient space is available.

  14. Distributed Sensors Simulator

    Energy Science and Technology Software Center (OSTI)

    2003-08-30

    The Distributed Sensors Simulator (DSS) is an infrastructure that allows the user to debug and test software for distributed sensor networks without the commitment inherent in using hardware. The flexibility of DSS allows developers and researchers to investigate topological, phenomenological, networking, robustness, and scaling issues; explore arbitrary algorithms for DSNs; and is particularly useful as a proof-of-concept tool. The user provides data on node location and specifications, defines event phenomena, and plugs in the application(s)more » to run. DSS in turn provides the virtual environmental embedding — but exposed to the user like no true embedding could ever be.« less

  15. Modeling The GRB Host Galaxy Mass Distribution: Are GRBs Unbiased Tracers

    Office of Scientific and Technical Information (OSTI)

    of Star Formation? (Journal Article) | SciTech Connect Journal Article: Modeling The GRB Host Galaxy Mass Distribution: Are GRBs Unbiased Tracers of Star Formation? Citation Details In-Document Search Title: Modeling The GRB Host Galaxy Mass Distribution: Are GRBs Unbiased Tracers of Star Formation? × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a

  16. Beam Loading by Distributed Injection of Electrons in a Plasma Wakefield

    Office of Scientific and Technical Information (OSTI)

    Accelerator (Journal Article) | SciTech Connect Journal Article: Beam Loading by Distributed Injection of Electrons in a Plasma Wakefield Accelerator Citation Details In-Document Search Title: Beam Loading by Distributed Injection of Electrons in a Plasma Wakefield Accelerator Authors: Vafaei-Najafabadi, N. ; Marsh, K.A. ; Clayton, C.E. ; An, W. ; Mori, W.B. ; Joshi, C. ; /UCLA ; Lu, W. ; /Tsinghua U., Beijing /UCLA ; Adli, E. ; /SLAC /U. Oslo ; Corde, S. ; Litos, M. ; Li, S. ; Gessner, S. ;

  17. Article on the Grid Tech Team's Strategic Plan for Grid Modernization Now Available

    Broader source: Energy.gov [DOE]

    A new article by OE’s Kerry Cheung, William Parks and Anjan Bose in IEEE’s Smart Grid newsletter describes the Department of Energy’s strategic plan to achieve a future electricity system that will be cost-effective, seamless from generation to end-use, and capable of meeting all clean energy demands and capacity requirements.

  18. Earth analysis methods, subsurface feature detection methods, earth analysis devices, and articles of manufacture

    DOE Patents [OSTI]

    West, Phillip B.; Novascone, Stephen R.; Wright, Jerry P.

    2012-05-29

    Earth analysis methods, subsurface feature detection methods, earth analysis devices, and articles of manufacture are described. According to one embodiment, an earth analysis method includes engaging a device with the earth, analyzing the earth in a single substantially lineal direction using the device during the engaging, and providing information regarding a subsurface feature of the earth using the analysis.

  19. Earth analysis methods, subsurface feature detection methods, earth analysis devices, and articles of manufacture

    DOE Patents [OSTI]

    West, Phillip B.; Novascone, Stephen R.; Wright, Jerry P.

    2011-09-27

    Earth analysis methods, subsurface feature detection methods, earth analysis devices, and articles of manufacture are described. According to one embodiment, an earth analysis method includes engaging a device with the earth, analyzing the earth in a single substantially lineal direction using the device during the engaging, and providing information regarding a subsurface feature of the earth using the analysis.

  20. Method for preparing configured silicon carbide whisker-reinforced alumina ceramic articles

    DOE Patents [OSTI]

    Tiegs, Terry N. (Lenoir City, TN)

    1987-01-01

    A ceramic article of alumina reinforced with silicon carbide whiskers suitable for the fabrication into articles of complex geometry are provided by pressureless sintering and hot isostatic pressing steps. In accordance with the method of the invention a mixture of 5 to 10 vol. % silicon carbide whiskers 0.5 to 5 wt. % of a sintering aid such as yttria and the balance alumina powders is ball-milled and pressureless sintered in the desired configuration in the desired configuration an inert atmosphere at a temperature of about 1800.degree. C. to provide a self-supporting configured composite of a density of at least about 94% theoretical density. The composite is then hot isostatically pressed at a temperature and pressure adequate to provide configured articles of at least about 98% of theoretical density which is sufficient to provide the article with sufficient strength and fracture toughness for use in most structural applications such as gas turbine blades, cylinders, and other components of advanced heat engines.

  1. Nondestructive method and apparatus for imaging grains in curved surfaces of polycrystalline articles

    DOE Patents [OSTI]

    Carpenter, D.A.

    1995-05-23

    A nondestructive method, and associated apparatus, are provided for determining the grain flow of the grains in a convex curved, textured polycrystalline surface. The convex, curved surface of a polycrystalline article is aligned in a horizontal x-ray diffractometer and a monochromatic, converging x-ray beam is directed onto the curved surface of the polycrystalline article so that the converging x-ray beam is diffracted by crystallographic planes of the grains in the polycrystalline article. The diffracted x-ray beam is caused to pass through a set of horizontal, parallel slits to limit the height of the beam and thereafter. The linear intensity of the diffracted x-ray is measured, using a linear position sensitive proportional counter, as a function of position in a direction orthogonal to the counter so as to generate two dimensional data. An image of the grains in the curved surface of the polycrystalline article is provided based on the two-dimensional data. 7 Figs.

  2. Distributed Wind | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Distributed Wind Distributed Wind The Wind Program's activities in wind technologies in distributed applications-or distributed wind-address the performance and reliability challenges associated with smaller turbines by focusing on technology development, testing, certification, and manufacturing. What is Distributed Wind? Photo of a turbine behind a school. The Wind Program defines distributed wind in terms of technology application, based on a wind plant's location relative to end-use and

  3. Distribution Category: Water R

    Office of Scientific and Technical Information (OSTI)

    Distribution Category: Water R e a c t o r Safety- R e s e a r c h - - A n a l y s i s ... 8 10 I TOTAL VOLUMETRIC FLUX, ms Fig. 9. Fully Developed Air-Water Flow Data.30 ANL Neg. ...

  4. Annual Coal Distribution Tables

    U.S. Energy Information Administration (EIA) Indexed Site

    and Foreign Distribution of U.S. Coal by State of Origin, 2001 State Region Domestic Foreign Total Alabama 14,828 4,508 19,336 Alaska 825 698 1,524 Arizona 13,143 - 13,143...

  5. International trends in solid-state lighting : analyses of the article and patent literature.

    SciTech Connect (OSTI)

    Tsao, Jeffrey Yeenien; Huey, Mark C.; Boyack, Kevin W.; Miksovic, Ann E.

    2008-07-01

    We present an analysis of the literature of solid-state lighting, based on a comprehensive dataset of 35,851 English-language articles and 12,420 U.S. patents published or issued during the years 1977-2004 in the foundational knowledge domain of electroluminescent materials and phenomena. The dataset was created using a complex, iteratively developed search string. The records in the dataset were then partitioned according to: whether they are articles or patents, their publication or issue date, their national or continental origin, whether the active electroluminescent material was inorganic or organic, and which of a number of emergent knowledge sub-domains they aggregate into on the basis of bibliographic coupling. From these partitionings, we performed a number of analyses, including: identification of knowledge sub-domains of historical and recent importance, and trends over time of the contributions of various nations and continents to the knowledge domain and its sub-domains. Among the key results: (1) The knowledge domain as a whole has been growing quickly: the average growth rates of the inorganic and organic knowledge sub-domains have been 8%/yr and 25%/yr, respectively, compared to average growth rates less than 5%/yr for English-language articles and U.S. patents in other knowledge domains. The growth rate of the organic knowledge sub-domain is so high that its historical dominance by the inorganic knowledge sub-domain will, at current trajectories, be reversed in the coming decade. (2) Amongst nations, the U.S. is the largest contributor to the overall knowledge domain, but Japan is on a trajectory to become the largest contributor within the coming half-decade. Amongst continents, Asia became the largest contributor during the past half-decade, overwhelmingly so for the organic knowledge sub-domain. (3) The relative contributions to the article and patent datasets differ for the major continents: North America contributing relatively more patents, Europe contributing relatively more articles, and Asia contributing in a more balanced fashion. (4) For the article dataset, the nations that contribute most in quantity also contribute most in breadth, while the nations that contribute less in quantity concentrate their contributions in particular knowledge sub-domains. For the patent dataset, North America and Europe tend to contribute improvements in end-use applications (e.g., in sensing, phototherapy and communications), while Asia tends to contribute improvements at the materials and chip levels. (5) The knowledge sub-domains that emerge from aggregations based on bibliographic coupling are roughly organized, for articles, by the degree of localization of electrons and holes in the material or phenomenon of interest, and for patents, according to both their emphasis on chips, systems or applications, and their emphasis on organic or inorganic materials. (6) The six 'hottest' topics in the article dataset are: spintronics, AlGaN UV LEDs, nanowires, nanophosphors, polyfluorenes and electrophosphorescence. The nine 'hottest' topics in the patent dataset are: OLED encapsulation, active-matrix displays, multicolor OLEDs, thermal transfer for OLED fabrication, ink-jet printed OLEDs, phosphor-converted LEDs, ornamental LED packages, photocuring and phototherapy, and LED retrofitting lamps. A significant caution in interpreting these results is that they are based on English-language articles and U.S. patents, and hence will tend to over-represent the strength of English-speaking nations (particularly the U.S.), and under-represent the strength of non-English-speaking nations (particularly China).

  6. Article surveillance magnetic marker having an hysteresis loop with large Barkhausen discontinuities

    DOE Patents [OSTI]

    Humphrey, Floyd B. (Bradfordwoods, PA)

    1987-01-01

    A marker for an electronic article surveillance system is disclosed comprising a body of magnetic material with retained stress and having a magnetic hysteresis loop with a large Barkhausen discontinuity such that, upon exposure of the marker to an external magnetic field whose field strength in the direction opposing the instantaneous magnetic polarization of the marker exceeds a predetermined threshold value, there results a regenerative reversal of the magnetic polarization of the marker. An electronic article surveillance system and a method utilizing the marker are also disclosed. Exciting the marker with a low frequency and low field strength, so long as the field strength exceeds the low threshold level for the marker, causes a regenerative reversal of magnetic polarity generating a harmonically rich pulse that is readily detected and easily distinguished.

  7. Method for providing uranium articles with a corrosion resistant anodized coating

    DOE Patents [OSTI]

    Waldrop, Forrest B. (Powell, TN); Washington, Charles A. (Oak Ridge, TN)

    1982-01-01

    Uranium articles are provided with anodized oxide coatings in an aqueous solution of an electrolyte selected from the group consisting of potassium phosphate, potassium hydroxide, ammonium hydroxide, and a mixture of potassium tetraborate and boric acid. The uranium articles are anodized at a temperature greater than about 75.degree. C. with a current flow of less than about 0.036 A/cm.sup.2 of surface area while the pH of the solution is maintained in a range of about 2 to 11.5. The pH values of the aqueous solution and the low current density utilized during the electrolysis prevent excessive dissolution of the uranium and porosity in the film or watering. The relatively high temperature of the electrolyte bath inhibits hydration and the attendant deleterious pitting so as to enhance corrosion resistance of the anodized coating.

  8. Method for providing uranium articles with a corrosion-resistant anodized coating

    DOE Patents [OSTI]

    Waldrop, F.B.; Washington, C.A.

    1981-01-07

    Uranium articles are provided with anodized oxide coatings in an aqueous solution of an electrolyte selected from the group consisting of potassium phosphate, potassium hydroxide, ammonium hydroxide, and a mixture of potassium tetraborate and boric acid. The uranium articles are anodized at a temperature greater than about 75/sup 0/C with a current flow of less than about 0.036 A/cm/sup 2/ of surface area while the pH of the solution is maintained in a range of about 2 to 11.5. The pH values of the aqueous solution and the low current density utilized during the electrolysis prevent excessive dissolution of the uranium and porosity in the film or watering. The relatively high temperature of the electrolyte bath inhibits hydration and the attendant deleterious pitting so as to enhance corrosion resistance of the anodized coating.

  9. Article comprising a garment or other textile structure for use in controlling body temperature

    DOE Patents [OSTI]

    Butzer, Melissa J. (Houston, TX)

    2000-01-01

    There is disclosed an article for use in cooling body temperature which comprises a garment having a coat and pant, with each having a body section adapted to receive a portion of the torso of the wearer and extensions from the body section to receive the wearer's limbs. The garment includes a system for circulating temperature controlling fluid from a suitable source through patches removably received in pockets in each of body section and extensions.

  10. Electrolyte membrane, methods of manufacture thereof and articles comprising the same

    DOE Patents [OSTI]

    Tamaki, Ryo; Rice, Steven Thomas; Yeager, Gary William

    2013-11-05

    Disclosed herein is a method of forming an electrolyte membrane comprising forming a mixture; the mixture comprising a polyhydroxy compound, an aromatic polyhalide compound and an alkali metal hydroxide; disposing the mixture on a porous substrate; reacting the mixture to form a crosslinked proton conductor; and sulfonating the proton conductor. Disclosed herein too is an article comprising a porous substrate; and a sulfonated crosslinked proton conductor disposed within pores of the porous substrate.

  11. Natural SUSY with a bino- or wino-like LSP (Journal Article) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect Natural SUSY with a bino- or wino-like LSP Citation Details In-Document Search Title: Natural SUSY with a bino- or wino-like LSP Authors: Baer, Howard ; Barger, Vernon ; Huang, Peisi ; Mickelson, Dan ; Padeffke-Kirkland, Maren ; Tata, Xerxes Publication Date: 2015-04-08 OSTI Identifier: 1240283 DOE Contract Number: AC02-06CH11357 Resource Type: Journal Article Resource Relation: Journal Name: Physical Review. D, Particles, Fields, Gravitation and Cosmology; Journal Volume: 91;

  12. Out of bounds additive manufacturing (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Out of bounds additive manufacturing Citation Details In-Document Search Title: Out of bounds additive manufacturing Lockheed Martin and Oak Ridge National Laboratory are working on an additive manufacturing system capable of manufacturing components measured not in terms of inches or feet, but multiple yards in all dimensions with the potential to manufacture parts that are completely unbounded in size. Authors: Holshouser, Chris [1] ; Newell, Clint [1] ; Palas, Sid [1] ; Love,

  13. DETECTION OF $sup 54$Mn IN FOOD SAMPLES (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    DETECTION OF $sup 54$Mn IN FOOD SAMPLES Citation Details In-Document Search Title: DETECTION OF $sup 54$Mn IN FOOD SAMPLES Authors: Neilson, H. ; Yakabe, H.M. Publication Date: 1966-01-01 OSTI Identifier: 4590897 Resource Type: Journal Article Resource Relation: Journal Name: Health Physics (England); Journal Volume: Vol: 12; Other Information: Orig. Receipt Date: 31-DEC-66 Research Org: Food and Drug Administration, Washington, D.C. Country of Publication: Country unknown/Code not available

  14. Detector systems for future HEP experiments (Journal Article) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect SciTech Connect Search Results Journal Article: Detector systems for future HEP experiments Citation Details In-Document Search Title: Detector systems for future HEP experiments Some thoughts are presented on the development of detector systems for future high energy physics experiments. These systems must be able to achieve simultaneous, reliable, high-efficiency identification and measurement of all objects that make up an 'event'. This will require a world-wide collaborative

  15. Discrete phase space based on finite fields (Journal Article) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect Journal Article: Discrete phase space based on finite fields Citation Details In-Document Search Title: Discrete phase space based on finite fields The original Wigner function provides a way of representing in phase space the quantum states of systems with continuous degrees of freedom. Wigner functions have also been developed for discrete quantum systems, one popular version being defined on a 2Nx2N discrete phase space for a system with N orthogonal states. Here we investigate an

  16. Domain walls as dark energy (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Domain walls as dark energy Citation Details In-Document Search Title: Domain walls as dark energy No abstract prepared. Authors: Friedland, Alexander ; Murayama, Hitoshi ; Perelstein, Maxim Publication Date: 2003-01-16 OSTI Identifier: 840977 Report Number(s): LBNL--50255 R&D Project: PTHOPS; TRN: US0502453 DOE Contract Number: AC03-76SF00098 Resource Type: Journal Article Resource Relation: Journal Name: Physical Review D; Journal Volume: 66; Other Information: Journal Publication Date:

  17. Fate and Transport of Uranium (VI) in Weathered Saprolite (Journal Article)

    Office of Scientific and Technical Information (OSTI)

    | SciTech Connect Journal Article: Fate and Transport of Uranium (VI) in Weathered Saprolite Citation Details In-Document Search Title: Fate and Transport of Uranium (VI) in Weathered Saprolite Batch and column experiments were conducted to investigate sorption and transport of uranium (U) in the presence of saprolite derived from interbedded shale, limestone, and sandstone sequences. Sorption kinetics were measured at two initial concentrations (C0; 1, 10 mM) and three soil:solution ratios

  18. Diverse oligomeric states of CEACAM IgV domains (Journal Article) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect Diverse oligomeric states of CEACAM IgV domains Citation Details In-Document Search Title: Diverse oligomeric states of CEACAM IgV domains Authors: Bonsor, Daniel A. ; Günther, Sebastian ; Beadenkopf, Robert ; Beckett, Dorothy ; Sundberg, Eric J. [1] + Show Author Affiliations Maryland Publication Date: 2016-01-19 OSTI Identifier: 1235483 Resource Type: Journal Article Resource Relation: Journal Name: Proceedings of the National Academy of Sciences of the United States of America;

  19. A billion-dollar bonanza (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    A billion-dollar bonanza Citation Details In-Document Search Title: A billion-dollar bonanza In late May -- only weeks after Congress had rejected the president's economic stimulus package because it would add to the federal deficit -- the House of Representatives generously allocated an extra $1.2 billion to the Pentagon. This article discusses some of the rationalizations House members gave for the gift and describes the attempts of a bipartisan group to defeat this request for funds

  20. A new spin on neutrino quantum kinetics (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    A new spin on neutrino quantum kinetics Citation Details In-Document Search Title: A new spin on neutrino quantum kinetics Authors: Cirigliano, Vincenzo ; Fuller, George M. ; Vlasenko, Alexey Publication Date: 2015-07-01 OSTI Identifier: 1198653 Grant/Contract Number: 12-LR-237070 Type: Published Article Journal Name: Physics Letters. Section B Additional Journal Information: Journal Volume: 747; Journal Issue: C; Journal ID: ISSN 0370-2693 Publisher: Elsevier Sponsoring Org: USDOE Country of

  1. Ab initio calculations of light-ion fusion reactions (Journal Article) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Journal Article: Ab initio calculations of light-ion fusion reactions Citation Details In-Document Search Title: Ab initio calculations of light-ion fusion reactions The exact treatment of nuclei starting from the constituent nucleons and the fundamental interactions among them has been a long-standing goal in nuclear physics. Above all nuclear scattering and reactions, which require the solution of the many-body quantum-mechanical problem in the continuum, represent an

  2. Ab initio study of neutron drops with chiral Hamiltonians (Journal Article)

    Office of Scientific and Technical Information (OSTI)

    | SciTech Connect Ab initio study of neutron drops with chiral Hamiltonians Citation Details In-Document Search Title: Ab initio study of neutron drops with chiral Hamiltonians Authors: Potter, H. D. ; Fischer, S. ; Maris, P. ; Vary, J. P. ; Binder, S. ; Calci, A. ; Langhammer, J. ; Roth, R. Publication Date: 2014-12-01 OSTI Identifier: 1197766 Grant/Contract Number: DESC0008485; FG02-87ER40371 Type: Published Article Journal Name: Physics Letters. Section B Additional Journal Information:

  3. Anomalous Dimensions and Non-Gaussianity (Journal Article) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect Anomalous Dimensions and Non-Gaussianity Citation Details In-Document Search Title: Anomalous Dimensions and Non-Gaussianity Authors: Green, Daniel ; Lewandowski, Matthew ; Senatore, Leonardo ; Silverstein, Eva ; Zaldarriaga, Matias Publication Date: 2013-02-21 OSTI Identifier: 1063787 Report Number(s): SLAC-PUB-15334 arXiv:1301.2630 DOE Contract Number: AC02-76SF00515 Resource Type: Journal Article Resource Relation: Journal Name: arXiv:1301.2630 Research Org: SLAC National

  4. Chaos and structure of level densities (Journal Article) | SciTech Connect

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Journal Article: Chaos and structure of level densities Citation Details In-Document Search Title: Chaos and structure of level densities The energy region of the first few MeV above the ground state shows interesting features of the nucleus. Beyond an ordered energy region just above the ground-state the dynamics changes, and chaotic features are observed in the neutron resonance region. The statistical properties of energies and wave-functions are common to all chaotic nuclei. However, if

  5. LSST Science Book, Version 2.0 (Journal Article) | SciTech Connect

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Journal Article: LSST Science Book, Version 2.0 Citation Details In-Document Search Title: LSST Science Book, Version 2.0 Authors: Abell, Paul A. ; /NASA, Houston ; Allison, Julius ; /Alabama A-M ; Anderson, Scott F. ; /Washington U., Seattle ; Andrew, John R. ; /NOAO, Tucson ; Angel, J.Roger P. ; /Arizona U. ; Armus, Lee ; /Spitzer Space Telescope ; Arnett, David ; /Arizona U. ; Asztalos, S.J. ; /LBL, Berkeley ; Axelrod, Tim S. ; /LSST Corp. ; Bailey, Stephen ; /Ecole Polytechnique more »;

  6. Coated phosphors, methods of making them, and articles comprising the same

    DOE Patents [OSTI]

    Lyons, Robert Joseph

    2013-02-19

    Compositions comprising a phosphor and a compound having the formula R.sub.1R.sub.2M, wherein R.sub.1 is a substituted or unsubstituted alkyl, aryl, heteroaryl, arylalkyl, heteroarylalkyl, alkoxy, alkoxyl, acyl heterocycle, haloalkyl, oxaalkyl, or silyl; R.sub.2 is a sulfate, sulfonate, or carboxylate and M is an alkali metal or an alkaline earth metal are provided. Phosphors coated with the compound, methods of making the coated phosphors and articles comprising the compositions are provided.

  7. Electrolyte membrane, methods of manufacture thereof and articles comprising the same

    DOE Patents [OSTI]

    Tamaki, Ryo (Santa Clarita, CA); Rice, Steven Thomas (Scotia, NY); Yeager, Gary William (Rexford, NY)

    2012-06-12

    Disclosed herein is a method of forming an electrolyte membrane comprising forming a mixture; the mixture comprising a polyhydroxy compound, an aromatic polyhalide compound and an alkali metal hydroxide; disposing the mixture on a porous substrate; reacting the mixture to form a proton conductor; and crosslinking the proton conductor to form a cross-linked proton-conducting network. Disclosed herein too is an article comprising a porous substrate; and a crosslinked proton conductor disposed on the porous substrate.

  8. S-wave scattering of strangeness -3 baryons (Journal Article) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect S-wave scattering of strangeness -3 baryons Citation Details In-Document Search Title: S-wave scattering of strangeness -3 baryons Authors: Buchoff, M ; Luu, T ; Wasem, J Publication Date: 2012-01-09 OSTI Identifier: 1104993 Report Number(s): LLNL-JRNL-522761 DOE Contract Number: W-7405-ENG-48 Resource Type: Journal Article Resource Relation: Journal Name: Physical Review D, vol. 85, no. 9, May 30, 2012, pp. 094511

  9. Some aging aspects of DEB getters (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Some aging aspects of DEB getters Citation Details In-Document Search Title: Some aging aspects of DEB getters Authors: Dinh, L N ; Krueger, R ; Cairns, G ; Maxwell, R S Publication Date: 2013-03-04 OSTI Identifier: 1116888 Report Number(s): LLNL-JRNL-626255 DOE Contract Number: W-7405-ENG-48 Resource Type: Journal Article Resource Relation: Journal Name: Journal of Nuclear Materials, vol. 442, na, November 1, 2013, pp. 298

  10. Stop-catalyzed baryogenesis beyond the MSSM (Journal Article) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect Stop-catalyzed baryogenesis beyond the MSSM Citation Details In-Document Search Title: Stop-catalyzed baryogenesis beyond the MSSM Authors: Katz, Andrey ; Perelstein, Maxim ; Ramsey-Musolf, Michael J. ; Winslow, Peter Publication Date: 2015-11-19 OSTI Identifier: 1226507 Grant/Contract Number: SC0011095 Type: Published Article Journal Name: Physical Review D Additional Journal Information: Journal Volume: 92; Journal Issue: 9; Journal ID: ISSN 1550-7998 Publisher: American Physical

  11. The Market - Who Needs Heat Pump Water Heaters? (Journal Article) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect Journal Article: The Market - Who Needs Heat Pump Water Heaters? Citation Details In-Document Search Title: The Market - Who Needs Heat Pump Water Heaters? Heat pump water heaters use less power than traditional ones, but they cost more. Does the investment make sense for you? for your neighbor? Well, it depends, and it's a question not only for consumers, but also for manufacturers, retailers and efficiency programs seeking to understand their markets, set prices and incentives, and

  12. The emerging multi-polar world and China's grand game (Journal Article) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Journal Article: The emerging multi-polar world and China's grand game Citation Details In-Document Search Title: The emerging multi-polar world and China's grand game This talk outlines a scenario describing an emerging multipolar world that is aligned with geographical regions. The stability and security of this multipolar world is examined with respect to demographics, trade (economics), resource constraints, and development. In particular I focus on Asia which has two

  13. Two-chicane compressed harmonic generation of soft x rays (Journal Article)

    Office of Scientific and Technical Information (OSTI)

    | SciTech Connect Two-chicane compressed harmonic generation of soft x rays Citation Details In-Document Search Title: Two-chicane compressed harmonic generation of soft x rays Authors: Ratner, Daniel ; Chao, Alex ; Huang, Zhirong Publication Date: 2011-02-07 OSTI Identifier: 1178293 Type: Published Article Journal Name: Physical Review Special Topics - Accelerators and Beams Additional Journal Information: Journal Volume: 14; Journal Issue: 2; Journal ID: ISSN 1098-4402 Publisher: American

  14. Image portion identification methods, image parsing methods, image parsing systems, and articles of manufacture

    DOE Patents [OSTI]

    Lassahn, Gordon D.; Lancaster, Gregory D.; Apel, William A.; Thompson, Vicki S.

    2013-01-08

    Image portion identification methods, image parsing methods, image parsing systems, and articles of manufacture are described. According to one embodiment, an image portion identification method includes accessing data regarding an image depicting a plurality of biological substrates corresponding to at least one biological sample and indicating presence of at least one biological indicator within the biological sample and, using processing circuitry, automatically identifying a portion of the image depicting one of the biological substrates but not others of the biological substrates.

  15. Properly Understanding the Impacts of Distributed Resources on Distribution Systems

    SciTech Connect (OSTI)

    Rizy, D Tom; Li, Fangxing; Li, Huijuan; Adhikari, Sarina; Kueck, John D

    2010-01-01

    The subject paper discusses important impacts of distributed resources on distribution networks and feeders. These include capacity, line losses, voltage regulation, and central system support (such as volt/var via central generators and substation) as the number, placement and penetration levels of distributed resources are varied. Typically, the impacts of distributed resources on the distribution system are studied by using steady-state rather than dynamic analysis tools. However, the response time and transient impacts of both system equipment (such as substation/feeder capacitors) and distributed resources needs to be taken into account and only dynamic analysis will provide the full impact results. ORNL is wrapping up a study of distributed resources interconnected to a large distribution system considering the above variables. A report of the study and its results will be condensed into a paper for this panel session. The impact of distributed resources will vary as the penetration level reaches the capacity of the distribution feeder/system. The question is how high of a penetration of distributed resource can be accommodated on the distribution feeder/system without any major changes to system operation, design and protection. The impacts most surely will vary depending upon load composition, distribution and level. Also, it is expected that various placement of distributed resources will impact the distribution system differently.

  16. Method and composition for molding low-density desiccant syntactic-foam articles

    DOE Patents [OSTI]

    Not Available

    1981-12-07

    These and other objects of the invention are achieved by a process for molding to size a desiccant syntactic foam article having a density of 0.2 to 0.9 g/cc and a moisture capacity of 1 to 12% by weight, comprising the steps of: charging a mold with a powdery mixture of an activated desiccant, microspheres and a thermosetting resin, the amount of the desiccant being sufficient to provide the required moisture capacity, and the amounts of the microspheres and resin being such that the microspheres/desiccant volume fraction exceeds the packing factor by an amount sufficient to substantially avoid shrinkage without causing excessively high molding pressures; covering the mold and heating the covered mold to a temperature and for an amount of time sufficient to melt the resin; and tightly closing the mold and heating the closed mold to a temperature and for an amount of time sufficient to cure the resin, and removing the resultant desiccant syntactic foam article from the mold. In a composition of matter aspect, the present invention provides desiccant syntactic foam articles, and a composition of matter for use in molding the same.

  17. Process for producing silicon nitride based articles of high fracture toughness and strength

    DOE Patents [OSTI]

    Huckabee, M.; Buljan, S.T.; Neil, J.T.

    1991-09-10

    A process for producing a silicon nitride-based article of improved fracture toughness and strength is disclosed. The process involves densifying to at least 98% of theoretical density a mixture including (a) a bimodal silicon nitride powder blend consisting essentially of about 10-30% by weight of a first silicon nitride powder of an average particle size of about 0.2 [mu]m and a surface area of about 8-12 m[sup 2]/g, and about 70-90% by weight of a second silicon nitride powder of an average particle size of about 0.4-0.6 [mu]m and a surface area of about 2-4 m[sup 2]/g, (b) about 10-50 percent by volume, based on the volume of the densified article, of refractory whiskers or fibers having an aspect ratio of about 3-150 and having an equivalent diameter selected to produce in the densified article an equivalent diameter ratio of the whiskers or fibers to grains of silicon nitride of greater than 1.0, and (c) an effective amount of a suitable oxide densification aid. Optionally, the mixture may be blended with a binder and injection molded to form a green body, which then may be densified by, for example, hot isostatic pressing.

  18. Process for producing silicon nitride based articles of high fracture toughness and strength

    DOE Patents [OSTI]

    Huckabee, Marvin (Marlboro, MA); Buljan, Sergej-Tomislav (Acton, MA); Neil, Jeffrey T. (Acton, MA)

    1991-01-01

    A process for producing a silicon nitride-based article of improved fracture toughness and strength. The process involves densifying to at least 98% of theoretical density a mixture including (a) a bimodal silicon nitride powder blend consisting essentially of about 10-30% by weight of a first silicon nitride powder of an average particle size of about 0.2 .mu.m and a surface area of about 8-12 m.sup.2 /g, and about 70-90% by weight of a second silicon nitride powder of an average particle size of about 0.4-0.6 .mu.m and a surface area of about 2-4 m.sup.2 /g, (b) about 10-50 percent by volume, based on the volume of the densified article, of refractory whiskers or fibers having an aspect ratio of about 3-150 and having an equivalent diameter selected to produce in the densified article an equivalent diameter ratio of the whiskers or fibers to grains of silicon nitride of greater than 1.0, and (c) an effective amount of a suitable oxide densification aid. Optionally, the mixture may be blended with a binder and injection molded to form a green body, which then may be densified by, for example, hot isostatic pressing.

  19. Ductless Hydronic Distribution Systems

    Broader source: Energy.gov (indexed) [DOE]

    America Program www.buildingamerica.gov Buildings Technologies Program Date: November 8, 2011 Ductless Hydronic Distribution Systems Welcome to the Webinar! We will start at 1:00 PM Eastern Time Be sure that you are also dialed into the telephone conference call: Dial-in number: 800-779-8694; Pass code: 2506667 Download the presentation at: www.buildingamerica.gov/meetings.html Building Technologies Program eere.energy.gov * Reduce energy use in new and existing residential buildings * Promote

  20. MEMORANDUM FOR DISTRIBUTION

    Energy Savers [EERE]

    * Department of Energy Washington, DC 20585 December 20, 2007 MEMORANDUM FOR DISTRIBUTION FROM: MICHAEL W. OWEN /<f /c / DIRECTOR, OFFICE OF LEGACY MANAGEM.ENT SUBJECT: Compliance with Established Policies and Guidance for Contractor Work Force Restructuring As you know, the Office of Legacy Management (LM) is the Department's fical point for all work force restructuring actions. As a reminder of policies and guidance that should continue to be followed when implementing work force