National Library of Energy BETA

Sample records for online size lead

  1. Size-dependent phase transition in methylammonium lead iodide perovskite microplate crystals

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Li, Dehui; Wang, Gongming; Cheng, Hung -Chieh; Chen, Chih -Yen; Wu, Hao; Liu, Yuan; Huang, Yu; Duan, Xiangfeng

    2016-04-21

    Methylammonium lead iodide perovskite has attracted considerable recent interest for solution processable solar cells and other optoelectronic applications. The orthorhombic-to-tetragonal phase transition in perovskite can significantly alter its optical, electrical properties and impact the corresponding applications. Here, we report a systematic investigation of the size-dependent orthorhombic-to-tetragonal phase transition using a combined temperature-dependent optical, electrical transport and transmission electron microscopy study. Our studies of individual perovskite microplates with variable thicknesses demonstrate that the phase transition temperature decreases with reducing microplate thickness. The sudden decrease of mobility around phase transition temperature and the presence of hysteresis loops in the temperature-dependent mobility confirmmore » that the orthorhombic-to-tetragonal phase transition is a first-order phase transition. Lastly, our findings offer significant fundamental insight on the temperature-and size-dependent structural, optical and charge transport properties of perovskite materials, and can greatly impact future exploration of novel electronic and optoelectronic devices from these materials.« less

  2. Effect of the size of experimental channels of the lead slowing-down spectrometer SVZ-100 (Institute for Nuclear Research, Moscow) on the moderation constant

    SciTech Connect (OSTI)

    Latysheva, L. N.; Bergman, A. A.; Sobolevsky, N. M.; Ilic, R. D.

    2013-04-15

    Lead slowing-down (LSD) spectrometers have a low energy resolution (about 30%), but their luminosity is 10{sup 3} to 10{sup 4} times higher than that of time-of-flight (TOF) spectrometers. A high luminosity of LSD spectrometers makes it possible to use them to measure neutron cross section for samples of mass about several micrograms. These features specify a niche for the application of LSD spectrometers in measuring neutron cross sections for elements hardly available in macroscopic amounts-in particular, for actinides. A mathematical simulation of the parameters of SVZ-100 LSD spectrometer of the Institute for Nuclear Research (INR, Moscow) is performed in the present study on the basis of the MCNPX code. It is found that the moderation constant, which is the main parameter of LSD spectrometers, is highly sensitive to the size and shape of detecting volumes in calculations and, hence, to the real size of experimental channels of the LSD spectrometer.

  3. Globus Online

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the NERSC endpoints on Globus Online by simply using your NERSC username and password. ... the NERSC endpoints on Globus Online by simply using your NERSC username and password. ...

  4. Globus Online

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Globus Onine Globus Online To access the HPSS system using Globus Online, you first need to create a Globus Online account. Once you've created an account you can log in either with your Globus Online information or with your NERSC account information. The first time you log in using your NERSC account you'll be asked to enter your Globus Online account information as well. Once you're logged in select "Start Transfer" (under "File Transfer"). This will take you to the file

  5. Online Tutorials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tutorials Online Tutorials Cybersecurity Tutorial This course is designed to remind you of ... Read More Training Materials The following tutorials are produced by NERSC staff and ...

  6. LEADING WITH LEADING INDICATORS

    SciTech Connect (OSTI)

    PREVETTE, S.S.

    2005-01-27

    This paper documents Fluor Hanford's use of Leading Indicators, management leadership, and statistical methodology in order to improve safe performance of work. By applying these methods, Fluor Hanford achieved a significant reduction in injury rates in 2003 and 2004, and the improvement continues today. The integration of data, leadership, and teamwork pays off with improved safety performance and credibility with the customer. The use of Statistical Process Control, Pareto Charts, and Systems Thinking and their effect on management decisions and employee involvement are discussed. Included are practical examples of choosing leading indicators. A statistically based color coded dashboard presentation system methodology is provided. These tools, management theories and methods, coupled with involved leadership and employee efforts, directly led to significant improvements in worker safety and health, and environmental protection and restoration at one of the nation's largest nuclear cleanup sites.

  7. Online Resources

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    online resources Online Resources Fusion and Plasma Physics Fusion Energy Education FuseEdWeb: Fusion Energy Education A Webby-award-winning site sponsored by LLNL and the Princeton Plasma Physics Laboratory with information and links to the world of fusion and plasma physics. General Atomics Fusion Education General Atomics Fusion Education Fusion education resources for teachers and students from General Atomics. Lasers and Photon Science Optics for Kids Optics 4 Kids Learn about optics-the

  8. Online Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Microfabrication | Safety Online Forms, Guidelines & Policies Questions of How to Get Started? - Click here! User Forms: Beamtime Request Form - pdf CAMD Gas Cylinder Request Form - pdf Compressed Gas Purchase Order - pdf Exposure Request Form - pdf (How To Fill the Exposure Request Form?) Format for Annual User Reports - pdf Microfabrication Project Proposal Form - pdf Synchrotron Project Proposal Form - pdf Registration & Test Application for Facility Access & Radiation Badge - pdf

  9. Accessing Online COR Training

    Office of Energy Efficiency and Renewable Energy (EERE)

    Contracting Officer’s Representative (COR) training is now be available in an online format. "Accessing Online COR Training" provides a step-by-step guide to access the online COR course. 

  10. Online help desk

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Online help desk Online help desk Use NERSC's Help desk web site to request assistance ... If you use the Help Desk web site your login ID will automatically be recorded. State ...

  11. Broward County Online Solar Permitting

    Broader source: Energy.gov [DOE]

    Broward County now offers Go SOLAR Online Permitting*, for rooftop solar photovoltaic system permitting. This online permitting system may be used for residential or low commercial properties that...

  12. hosting-transims-online

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hosting the TRANSIMS Online Community Scott B. Smith, Ph.D. US DOT RITA Volpe Center ... You need JavaScript enabled to view it. List of Authors ... Scott Smith ...

  13. Prabhat Steps In as DAS Group Lead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Prabhat Steps In as DAS Group Lead Prabhat Steps In as DAS Group Lead September 1, 2014 prabhat Prabhat has been named Group Lead of the Data and Analytics Services (DAS) Group at the Department of Energy's National Energy Research Scientific Computing Center (NERSC). The DAS group helps NERSC's users address data and analytics challenges arising from the increasing size and complexity of data from simulations and experiments. As the DAS Group Lead, Prabhat will play a key role in developing and

  14. Getting the Lead Out

    DOE R&D Accomplishments [OSTI]

    Gibson, Kerry

    2011-04-08

    Discarded electronics no longer pose an environmental hazard from lead solder thanks to a lead-free alternative developed at the Ames Laboratory.

  15. VOLUMETRIC LEAD ASSAY

    SciTech Connect (OSTI)

    M.A. Ebadian, Ph.D.; S.K. Dua; David Roelant; Sachin Kumar

    2001-01-01

    This report describes a system for handling and radioassay of lead, consisting of a robot, a conveyor, and a gamma spectrometer. The report also presents a cost-benefit analysis of options: radioassay and recycling lead vs. disposal as waste.

  16. Lead carbonate scintillator materials

    DOE Patents [OSTI]

    Derenzo, Stephen E.; Moses, William W.

    1991-01-01

    Improved radiation detectors containing lead carbonate or basic lead carbonate as the scintillator element are disclosed. Both of these scintillators have been found to provide a balance of good stopping power, high light yield and short decay constant that is superior to other known scintillator materials. The radiation detectors disclosed are favorably suited for use in general purpose detection and in medical uses.

  17. lead paint chart

    Office of Environmental Management (EM)

    1930 Assume Lead Will WX Disturb Paint? No Yes Will WX Disturb More than 2 ft 2 . per Room? Yes HUD Housing or Using HUD ? Yes More than 50ugm 3 ? No LSW & HUD Rule 35.900 **...

  18. Lead carbonate scintillator materials

    DOE Patents [OSTI]

    Derenzo, S.E.; Moses, W.W.

    1991-05-14

    Improved radiation detectors containing lead carbonate or basic lead carbonate as the scintillator element are disclosed. Both of these scintillators have been found to provide a balance of good stopping power, high light yield and short decay constant that is superior to other known scintillator materials. The radiation detectors disclosed are favorably suited for use in general purpose detection and in medical uses. 3 figures.

  19. Fatigue of extracted lead zirconate titanate multilayer actuators under unipolar high field electric cycling

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Wang, Hong; Lee, Sung Min; Wang, James L.; Lin, Hua-Tay

    2014-12-19

    Testing of large prototype lead zirconate titanate (PZT) stacks presents substantial technical challenges to electronic testing systems, so an alternative approach that uses subunits extracted from prototypes has been pursued. Extracted 10-layer and 20-layer plate specimens were subjected to an electric cycle test under an electric field of 3.0/0.0 kV/mm, 100 Hz to 10^8 cycles. The effects of measurement field level and stack size (number of PZT layers) on the fatigue responses of piezoelectric and dielectric coefficients were observed. On-line monitoring permitted examination of the fatigue response of the PZT stacks. The fatigue rate (based on on-line monitoring) and themore » fatigue index (based on the conductance spectrum from impedance measurement or small signal measurement) were developed to quantify the fatigue status of the PZT stacks. The controlling fatigue mechanism was analyzed against the fatigue observations. The data presented can serve as input to design optimization of PZT stacks and to operation optimization in critical applications such as piezoelectric fuel injectors in heavy-duty diesel engines.« less

  20. Fatigue of extracted lead zirconate titanate multilayer actuators under unipolar high field electric cycling

    SciTech Connect (OSTI)

    Wang, Hong; Lee, Sung Min; Wang, James L.; Lin, Hua-Tay

    2014-12-19

    Testing of large prototype lead zirconate titanate (PZT) stacks presents substantial technical challenges to electronic testing systems, so an alternative approach that uses subunits extracted from prototypes has been pursued. Extracted 10-layer and 20-layer plate specimens were subjected to an electric cycle test under an electric field of 3.0/0.0 kV/mm, 100 Hz to 10^8 cycles. The effects of measurement field level and stack size (number of PZT layers) on the fatigue responses of piezoelectric and dielectric coefficients were observed. On-line monitoring permitted examination of the fatigue response of the PZT stacks. The fatigue rate (based on on-line monitoring) and the fatigue index (based on the conductance spectrum from impedance measurement or small signal measurement) were developed to quantify the fatigue status of the PZT stacks. The controlling fatigue mechanism was analyzed against the fatigue observations. The data presented can serve as input to design optimization of PZT stacks and to operation optimization in critical applications such as piezoelectric fuel injectors in heavy-duty diesel engines.

  1. Online Legal Resources | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Resources Online Legal Resources Online Legal Resources Legislative Documents US Code Public and Private Laws Congressional Bills Congressional Record Congressional Hearings ...

  2. Nobel Lecture Videos Now Available Online

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lecture Series Videos Now Available Online Nobel Lecture Videos Now Available Online May 29, 2014 by Kathy Kincade Three of the NERSC Nobel Lecture Series videos -- featuring John...

  3. Hopper Job Size Charts

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Job Size Charts Hopper Job Size Charts Fractional Jobs The following charts show the fraction of hours used on Hopper in each of five job-core-size bins: 2014 Usage by Job Size Chart 2013 2012 2011 Large Jobs The following charts show the fraction of hours used on Hopper by jobs using greater than 16,384 cores: 2014 2013 2012 Usage by Job Size Chart 2011 Last edited: 2016-05-02 09:20:42

  4. GOLD: The Genomes Online Database

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Kyrpides, Nikos; Liolios, Dinos; Chen, Amy; Tavernarakis, Nektarios; Hugenholtz, Philip; Markowitz, Victor; Bernal, Alex

    Since its inception in 1997, GOLD has continuously monitored genome sequencing projects worldwide and has provided the community with a unique centralized resource that integrates diverse information related to Archaea, Bacteria, Eukaryotic and more recently Metagenomic sequencing projects. As of September 2007, GOLD recorded 639 completed genome projects. These projects have their complete sequence deposited into the public archival sequence databases such as GenBank EMBL,and DDBJ. From the total of 639 complete and published genome projects as of 9/2007, 527 were bacterial, 47 were archaeal and 65 were eukaryotic. In addition to the complete projects, there were 2158 ongoing sequencing projects. 1328 of those were bacterial, 59 archaeal and 771 eukaryotic projects. Two types of metadata are provided by GOLD: (i) project metadata and (ii) organism/environment metadata. GOLD CARD pages for every project are available from the link of every GOLD_STAMP ID. The information in every one of these pages is organized into three tables: (a) Organism information, (b) Genome project information and (c) External links. [The Genomes On Line Database (GOLD) in 2007: Status of genomic and metagenomic projects and their associated metadata, Konstantinos Liolios, Konstantinos Mavromatis, Nektarios Tavernarakis and Nikos C. Kyrpides, Nucleic Acids Research Advance Access published online on November 2, 2007, Nucleic Acids Research, doi:10.1093/nar/gkm884]

    The basic tables in the GOLD database that can be browsed or searched include the following information:

    • Gold Stamp ID
    • Organism name
    • Domain
    • Links to information sources
    • Size and link to a map, when available
    • Chromosome number, Plas number, and GC content
    • A link for downloading the actual genome data
    • Institution that did the sequencing
    • Funding source
    • Database where information resides
    • Publication status and information

    • Photo-induced inhibition of insulin amyloid fibrillation on online laser measurement

      SciTech Connect (OSTI)

      Liu, Rui; Su, Rongxin; Qi, Wei; He, Zhimin

      2011-06-03

      Highlights: {yields} We compare the structures of insulin upon heating with or without laser irradiation. {yields} Laser irradiation inhibits insulin fibrillation and may be of insert for mechanistic disease studies. {yields} Online laser measurements should be carefully used in the study of amyloid proteins. -- Abstract: Protein aggregation and amyloid fibrillation can lead to several serious diseases and protein drugs ineffectiveness; thus, the detection and inhibition of these processes have been of great interest. In the present study, the inhibition of insulin amyloid fibrillation by laser irradiation was investigated using dynamic light scattering (DLS), transmission electron microscopy (TEM), far-UV circular dichroism (far-UV CD), and thioflavin T (ThT) fluorescence. During heat-induced aggregation, the size distribution of two insulin solutions obtained by online and offline dynamic light scattering were different. The laser-on insulin in the presence of 0.1 M NaCl exhibited fewer fibrils than the laser-off insulin, whereas no insulin fibril under laser irradiation was observed in the absence of 0.1 M NaCl for 45 h incubation. Moreover, our CD results showed that the laser-irradiated insulin solution maintained mainly an {alpha}-helical conformation, but the laser-off insulin solution formed bulk fibrils followed by a significant increase in {beta}-sheet content for 106 h incubation. These findings provide an inhibition method for insulin amyloid fibrillation using the laser irradiation and demonstrate that the online long-time laser measurements should be carefully used in the study of amyloid proteins because they may change the original results.

    • Edison Job Size Charts

      Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

      Reports » Edison Job Size Charts Edison Job Size Charts Fraction of Hours Used per Job Size Note: Interactive charts with current and past Cori and Edison data are now available on MyNERSC This chart shows the fraction of hours used on Edison in each of 5 job-core-size bins. 2015 Usage by Job Size Chart 2014 Fraction of Hours Used by Big Jobs This chart shows the fraction of hours used on Edison by jobs using 16,384 or more cores. 2015 Usage by Job Size Chart 2014 Last edited: 2016-04-21

    • Sec. Chu Online Town Hall

      Office of Energy Efficiency and Renewable Energy (EERE)

      Secretary Steven Chu hosted an online town hall to discuss the clean energy and innovation agenda President Obama laid out in his 2011 State of the Union address. (January 26, 2011)

    • Groundwater Report Goes Online, Interactive

      Broader source: Energy.gov [DOE]

      RICHLAND, Wash. – EM’s Richland Operations Office (RL) has moved its 1,200-page annual report on groundwater monitoring to a fully online and interactive web application.

    • JOBAID-LAUNCHING ONLINE CONTENT

      Broader source: Energy.gov [DOE]

      In this jobaid you will learn how to launch Online Content "Items" or Courses. In the LMS you can launch most anything as an "item": documents, courses, webpages and track users that have completed...

    • User Experience Research Online Tools

      Broader source: Energy.gov [DOE]

      The Office of Energy Efficiency and Renewable Energy (EERE) has a variety of online tools to help you conduct user experience (UX) research. The following tools are free for use by staff and contractors who work on the EERE website.

    • LEAD SEVERING CONTRIVANCE

      DOE Patents [OSTI]

      Widmaier, W.

      1958-04-01

      A means for breaking an electrical circuit within an electronic tube during the process of manufacture is described. Frequently such circuits must be employed for gettering or vapor coating purposes, however, since an external pair of corector pins having no use after manufacture, is undesirable, this invention permits the use of existing leads to form a temporary circuit during manufacture, and severing it thereafter. One portion of the temporary circuit, made from a springy material such as tungsten, is spot welded to a fusable member. To cut the circuit an external radiant heat source melts the fusable member, allowing the tensed tungsten spring to contract and break the circuit. This inexpensive arrangement is particularly useful when the tube has a great many external leads crowded into the tube base.

    • Generating Energy Efficiency Project Leads and Allocating Leads to

      Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

      Contractors | Department of Energy Energy Efficiency Project Leads and Allocating Leads to Contractors Generating Energy Efficiency Project Leads and Allocating Leads to Contractors Better Buildings Residential Network Peer Exchange Call Series: Generating Energy Efficiency Project Leads and Allocating Leads to Contractors, Call Slides and Discussion Summary, February 26, 2015. Call Slides and Discussion Summary (2.1 MB) More Documents & Publications Unique Fee-for-Service Revenues Think

    • Generating Energy Efficiency Project Leads and Allocating Leads...

      Energy Savers [EERE]

      Generating Energy Efficiency Project Leads and Allocating Leads to Contractors Better Buildings Residential Network Peer Exchange Call Series: Generating Energy Efficiency Project ...

    • ARM - Measurement - Hydrometeor size

      Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

      size ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Hydrometeor size The size of a hydrometeor, measured directly or derived from other measurements. Categories Cloud Properties Instruments The above measurement is considered scientifically relevant for the following instruments. Refer to the datastream (netcdf) file headers of each instrument for a list of all available measurements, including those

    • Distributed PV Interconnection Screening Procedures and Online Tools

      Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

      Screening Procedures and Online Tools Page 1 of 9 Kristen Ardani, Joel Dickinson, Max Berger, David Crowell, Jeff Dickinson, Kelly Webster Page 1 of 9 [Speaker: Kristen Ardani] Cover Slide: Thank you everyone for joining us today for the DG Interconnection Collaborative. My name is Kristen Ardani,I'm an analyst here at NREL and the lead facilitator of the DGIC. We are fortunate today to have speakers Joel Dickinson of Salt River Project. We are going to discuss distributed PV interconnection

    • Home refinishing, lead paint, and infant blood lead levels

      SciTech Connect (OSTI)

      Rabinowitz, M.; Leviton, A.; Bellinger, D.

      1985-04-01

      The blood lead levels of 249 infants were measured semi-annually from birth to two years of age; the home paint was sampled and any recent home refinishing activity recorded. Mean blood lead from birth to age 2 years did not vary systematically with age but did correlate significantly with the amount of lead in the indoor paint. Refinishing activity in homes with high lead paint was associated with elevations of blood lead averaging 69 per cent.

    • Photovoltaic Online Training Course for Code Officials

      Office of Energy Efficiency and Renewable Energy (EERE)

      The Photovoltaic Online Training Course for Code Officials is a free online training tool for those officials who conduct reviews and inspections of residential PV systems. Throughout the course's...

    • Does size matter?

      SciTech Connect (OSTI)

      Carreras, B. A.; Physics Department, College of Natural Science and Mathematics and Geophysical Institute, University of Alaska, Fairbanks, Alaska 99775; Physics Department, Universidad Carlos III de Madrid, Madrid ; Newman, D. E.; Dobson, Ian

      2014-06-15

      Failures of the complex infrastructures society depends on having enormous human and economic cost that poses the question: Are there ways to optimize these systems to reduce the risks of failure? A dynamic model of one such system, the power transmission grid, is used to investigate the risk from failure as a function of the system size. It is found that there appears to be optimal sizes for such networks where the risk of failure is balanced by the benefit given by the size.

    • Electronic Document Online Correspondence and Concurrence System

      Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

      (eDOCS),Office of the Executive Secretariat | Department of Energy Online Correspondence and Concurrence System (eDOCS),Office of the Executive Secretariat Electronic Document Online Correspondence and Concurrence System (eDOCS),Office of the Executive Secretariat Electronic Document Online Correspondence and Concurrence System (eDOCS),Office of the Executive Secretariat Electronic Document Online Correspondence and Concurrence System (eDOCS),Office of the Executive Secretariat (369.65 KB)

    • P Stub Online, Bechtel Jacobs Company, LLC | Department of Energy

      Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

      P Stub Online, Bechtel Jacobs Company, LLC P Stub Online, Bechtel Jacobs Company, LLC P Stub Online, Bechtel Jacobs Company, LLC P Stub Online, Bechtel Jacobs Company, LLC (210.66 ...

  1. Breakthrough: Lead-free Solder

    ScienceCinema (OSTI)

    Anderson, Iver

    2013-03-01

    Ames Laboratory senior metallurgist Iver Anderson explains the importance of lead-free solder in taking hazardous lead out of the environment by eliminating it from discarded computers and electronics that wind up in landfills. Anderson led a team that developed a tin-silver-copper replacement for traditional lead-tin solder that has been adopted by more than 50 companies worldwide.

  2. Continuous On-Line Partial Discharge Monitor for Medium-Voltage Cable Feasibility Study

    SciTech Connect (OSTI)

    M. Fenger

    2005-11-30

    Partial discharge (PD) assessment is one method of detecting cable conditions that predict approaching failure. While not all PDs in cable systems lead to failure, PDs within the cable's insulation can lead to relatively rapid failure. Accordingly, on-line PD assessment may be more useful than periodic PD assessment because the period of partial discharging at the end of a cable's life may be quite short. The research described in this report studied the feasibility of developing an on-line PD monitor for assessing both shielded and unshielded MV cables.

  3. Lead-based paint assessment

    SciTech Connect (OSTI)

    Lorie, C.; Cowdery, J.W.

    1994-12-31

    In 1977, The US consumer product safety commission banned the use of lead-based paint (LBP) in all industries, except the maritime industry which still has certain privileged uses. Unfortunately for property and building owners, the ban did not come soon enough. In response to this heightened awareness, several environmental market sectors addressing the issues have emerged. These include: residential; soil; commercial; water; and structures. The first and most important step in addressing the concerns posed by the existence of lead based contamination is to quantify the amount of lead-based product, to determine the location of the lead based product and the extent, if any, of lead based contamination, and to make recommendations for the remediation or abatement of the lead product and resultant contamination. In narrowing the focus of these issues, this paper discusses lead-based paint assessment; preparing and organizing the assessment, the regulatory considerations, assessment methodology, and presentation of results.

  4. One Vaccine Leads to Another

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy One Thing Leads to Another: How NETL Research Saves Lives One Thing Leads to Another: How NETL Research Saves Lives August 8, 2013 - 10:57am Addthis One Thing Leads to Another: How NETL Research Saves Lives Learn More The coronary stent was developed as part of NETL's Technology Transfer program. NETL's technology portfolio contains a broad range of innovations that have resulted from research in areas such as carbon capture and sequestration, mercury capture, fuel cells, sensors and

  5. One Vaccine Leads to Another

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    One Vaccine Leads to Another Print Diphtheria is a potentially lethal respiratory disease that is fairly well controlled by vaccines discovered early last century. These vaccines...

  6. High temperature superconductor current leads

    DOE Patents [OSTI]

    Hull, John R.; Poeppel, Roger B.

    1995-01-01

    An electrical lead having one end for connection to an apparatus in a cryogenic environment and the other end for connection to an apparatus outside the cryogenic environment. The electrical lead includes a high temperature superconductor wire and an electrically conductive material distributed therein, where the conductive material is present at the one end of the lead at a concentration in the range of from 0 to about 3% by volume, and at the other end of the lead at a concentration of less than about 20% by volume. Various embodiments are shown for groups of high temperature superconductor wires and sheaths.

  7. High temperature superconductor current leads

    DOE Patents [OSTI]

    Hull, J.R.; Poeppel, R.B.

    1995-06-20

    An electrical lead is disclosed having one end for connection to an apparatus in a cryogenic environment and the other end for connection to an apparatus outside the cryogenic environment. The electrical lead includes a high temperature superconductor wire and an electrically conductive material distributed therein, where the conductive material is present at the one end of the lead at a concentration in the range of from 0 to about 3% by volume, and at the other end of the lead at a concentration of less than about 20% by volume. Various embodiments are shown for groups of high temperature superconductor wires and sheaths. 9 figs.

  8. Aerosol mobility size spectrometer

    DOE Patents [OSTI]

    Wang, Jian; Kulkarni, Pramod

    2007-11-20

    A device for measuring aerosol size distribution within a sample containing aerosol particles. The device generally includes a spectrometer housing defining an interior chamber and a camera for recording aerosol size streams exiting the chamber. The housing includes an inlet for introducing a flow medium into the chamber in a flow direction, an aerosol injection port adjacent the inlet for introducing a charged aerosol sample into the chamber, a separation section for applying an electric field to the aerosol sample across the flow direction and an outlet opposite the inlet. In the separation section, the aerosol sample becomes entrained in the flow medium and the aerosol particles within the aerosol sample are separated by size into a plurality of aerosol flow streams under the influence of the electric field. The camera is disposed adjacent the housing outlet for optically detecting a relative position of at least one aerosol flow stream exiting the outlet and for optically detecting the number of aerosol particles within the at least one aerosol flow stream.

  9. Online Application Process | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Online Application Process How to apply NETL uses an online process to apply for most of our jobs. You can access our job listings through USAJOBS. You can browse jobs; but before you can apply for a specific vacancy you must complete the registration process through USAJOBS home page. In addition to the steps below, see NETL's Frequently Asked Questions about the online application process. Submitting a resume The registration process asks you to submit a resume. Although you must have an

  10. Adaptive Techniques for Online Auctions

    SciTech Connect (OSTI)

    Sakas, D. P.; Vlachos, D. S.; Simos, T. E.

    2007-12-26

    Online auctions consider a setting in which agents arrive dynamically and require that an allocation and payment decision is made before they depart. An auctioneer must take a decision having no knowledge about the time horizon and the strategy of the bidder agent. In this work, we present an utility theory based model which is capable of taking the auctioneer decision and adopt its assumptions about the bidders from the results of past auctions. Simulation results are presented in order to test the efficiency of the proposed model.

  11. Information, Planning, and Conservation (IPAC) online screening...

    Open Energy Info (EERE)

    Information, Planning, and Conservation (IPAC) online screening tool Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: Information,...

  12. Electronic Document Online Correspondence and Concurrence System...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    System (eDOCS),Office of the Executive Secretariat Electronic Document Online Correspondence and Concurrence System (eDOCS),Office of the Executive Secretariat Electronic ...

  13. Lead-free primary explosives

    DOE Patents [OSTI]

    Huynh, My Hang V.

    2010-06-22

    Lead-free primary explosives of the formula (cat).sub.Y[M.sup.II(T).sub.X(H.sub.2O).sub.6-X].sub.Z, where T is 5-nitrotetrazolate, and syntheses thereof are described. Substantially stoichiometric equivalents of the reactants lead to high yields of pure compositions thereby avoiding dangerous purification steps.

  14. Femtosecond laser-induced size reduction of carbon nanodots in solution: Effect of laser fluence, spot size, and irradiation time

    SciTech Connect (OSTI)

    Nguyen, Vanthan; Yan, Lihe Si, Jinhai; Hou, Xun

    2015-02-28

    Photoluminescent carbon nanodots (C-dots) with size tunability and uniformity were fabricated in polyethylene glycol (PEG{sub 200N}) solution using femtosecond laser ablation method. The size distributions and photoluminescence (PL) properties of C-dots are well controlled by adjusting the combined parameters of laser fluence, spot size, and irradiation time. The size reduction efficiency of the C-dots progressively increases with decreasing laser fluence and spot size. The optimal PL spectra are red-shifted and the quantum yields decrease with the increase in C-dots size, which could be attributed to the more complex surface functional groups attached on C-dots induced at higher laser fluence and larger spot size. Moreover, an increase in irradiation time leads to a decrease in size of C-dots, but long-time irradiation will result in the generation of complex functional groups on C-dots, subsequently the PL spectra are red-shifted.

  15. NATIONAL LEAD COMPANY OF OHIO

    Office of Legacy Management (LM)

    8 Radiatlon Dept. 3 Water Treatment Plant (Far W&or Spnphs Only) NILHhS-1?6 (RFV lO... 8 Radiation Dept. 3 Water Treotmnt Plant (Fw Wkr bnplos Only) NATIONAL. LEAD ...

  16. One Vaccine Leads to Another

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    One Vaccine Leads to Another One Vaccine Leads to Another Print Friday, 24 May 2013 11:19 Diphtheria is a potentially lethal respiratory disease that is fairly well controlled by vaccines discovered early last century. These vaccines have been extremely effective; studies on one vaccine in particular, the nontoxic form of the diphtheria toxin (DT), have informed other vaccines. Recently, researchers at Novartis GNF solved several structures of a nontoxic DT using data obtained at ALS Beamline

  17. Online Monitoring of Induction Motors

    SciTech Connect (OSTI)

    McJunkin, Timothy R.; Agarwal, Vivek; Lybeck, Nancy Jean

    2016-01-01

    The online monitoring of active components project, under the Advanced Instrumentation, Information, and Control Technologies Pathway of the Light Water Reactor Sustainability Program, researched diagnostic and prognostic models for alternating current induction motors (IM). Idaho National Laboratory (INL) worked with the Electric Power Research Institute (EPRI) to augment and revise the fault signatures previously implemented in the Asset Fault Signature Database of EPRI’s Fleet Wide Prognostic and Health Management (FW PHM) Suite software. Induction Motor diagnostic models were researched using the experimental data collected by Idaho State University. Prognostic models were explored in the set of literature and through a limited experiment with 40HP to seek the Remaining Useful Life Database of the FW PHM Suite.

  18. Online optimization of storage ring nonlinear beam dynamics ...

    Office of Scientific and Technical Information (OSTI)

    Online optimization of storage ring nonlinear beam dynamics Citation Details In-Document Search Title: Online optimization of storage ring nonlinear beam dynamics Authors: Huang,...

  19. Online optimization of storage ring nonlinear beam dynamics ...

    Office of Scientific and Technical Information (OSTI)

    Online optimization of storage ring nonlinear beam dynamics Citation Details In-Document Search Title: Online optimization of storage ring nonlinear beam dynamics You are...

  20. NERSC Online Training May 3: Navigating NERSC File Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Online Training May 3: Navigating NERSC File Systems NERSC Online Training May 3: Navigating NERSC File Systems April 26, 2011 by Richard Gerber A NERSC training event, "Navigating ...

  1. ORNL, Six US universities initiate collaborative online neutron...

    Office of Scientific and Technical Information (OSTI)

    ORNL, Six US universities initiate collaborative online neutron science course Citation Details In-Document Search Title: ORNL, Six US universities initiate collaborative online ...

  2. FERC Online eLibrary | Open Energy Information

    Open Energy Info (EERE)

    Not Provided DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for FERC Online eLibrary Citation Federal Energy Regulatory Commission. FERC...

  3. Nevada Division of Environmental Protection online NOI system...

    Open Energy Info (EERE)

    2012 DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for Nevada Division of Environmental Protection online NOI system Citation...

  4. New Online Tools Showcase Efficient Technologies and Deployment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    New Online Tools Showcase Efficient Technologies and Deployment Case Studies New Online Tools Showcase Efficient Technologies and Deployment Case Studies September 29, 2015 -...

  5. DOE Jobs Online (Hiring Manager), Office of Human Capitol Management...

    Broader source: Energy.gov (indexed) [DOE]

    Jobs Online (Hiring Manager), Office of Human Capitol Management Innovation and Solutions DOE Jobs Online (Hiring Manager), Office of Human Capitol Management Innovation and ...

  6. Industrial lead paint removal specifications

    SciTech Connect (OSTI)

    Stone, R.C.

    1997-06-01

    The purpose of this paper is to inform the reader as to some of the pertinent rules and regulations promulgated by the Environmental Protection Agency (EPA) and the Occupational Safety and Health Administration (OSHA) that may effect an industrial lead paint removal project. The paper discusses a recommended schedule of procedures and preparations to be followed by the lead paint removal specification writer when analyzing the possible impact of the project on the environment, the public and workers. Implications of the Clean Air Act, the Clean Water Act and the Resource Conservation and Recovery Act (RCRA) along with hazardous waste handling, manifesting, transporting and disposal procedures are discussed with special emphasis placed as to their impact on the writer and the facility owner. As the rules and regulations are highly complex, the writer has attempted to explain the methodology currently being used in state-of-the-art industrial lead abatement specifications.

  7. Leading the Charge: Christine Klein

    Office of Energy Efficiency and Renewable Energy (EERE)

    Change doesn’t happen on its own. It’s led by dedicated and passionate people who are committed to empowering Indian Country to energize future generations. Leading the Charge is a regular Office of Indian Energy newsletter feature spotlighting the movers and shakers in energy development on tribal lands. In this issue, we talk to Christine Klein, an adopted Haida who is leading efforts to help Alaska Native villages address their energy challenges in her role as Vice President and Chief Operating Officer of the Calista Corporation.

  8. NATIONAL LEAD COMPANY OF OHIO

    Office of Legacy Management (LM)

    t-t AL- 1. + T fi r,y* t ,.- . NATIONAL LEAD COMPANY OF OHIO Ofll i iy Ci)wp HEALTH AND SAFETY DIVISION - ANALYTICAL DEPT. ANALYTICAL DATA SHEET U-G b ;33y jl:tL G c-w &3(y I...

  9. Soluble Lead Flow Battery: Soluble Lead Flow Battery Technology

    SciTech Connect (OSTI)

    2010-09-01

    GRIDS Project: General Atomics is developing a flow battery technology based on chemistry similar to that used in the traditional lead-acid battery found in nearly every car on the road today. Flow batteries store energy in chemicals that are held in tanks outside the battery. When the energy is needed, the chemicals are pumped through the battery. Using the same basic chemistry as a traditional battery but storing its energy outside of the cell allows for the use of very low cost materials. The goal is to develop a system that is far more durable than today’s lead-acid batteries, can be scaled to deliver megawatts of power, and which lowers the cost of energy storage below $100 per kilowatt hour.

  10. On-line chemical composition analyzer development

    SciTech Connect (OSTI)

    Garrison, A.A.

    1993-01-01

    This report relates to the development of an on-line Raman analyzer for control of a distillation column. It is divided into: program issues, experimental control system evaluation, energy savings analysis, and reliability analysis. (DLC)

  11. Peer Review Presentations Now Available Online

    Broader source: Energy.gov [DOE]

    The Bioenergy Technologies Office (BETO) hosted the 2015 Project Peer Review from March 23–27, 2015 in Alexandria, Virginia. The individual project and plenary presentations from the week are now available online.

  12. Nobel Lecture Videos Now Available Online

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lecture Series Videos Now Available Online Nobel Lecture Videos Now Available Online May 29, 2014 by Kathy Kincade Three of the NERSC Nobel Lecture Series videos -- featuring John Kuriyan, Warren Washington, George Smoot, and Saul Perlmutter -- are now available for viewing. See NERSC Nobel Lecture Series Subscribe via RSS Subscribe Browse by Date August 2016 June 2016 May 2016 April 2016 January 2016 December 2015 November 2015 October 2015 September 2015 August 2015 July 2015 April 2015 March

  13. NERSC Strategic Plan Is Now Online

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Strategic Plan Is Now Online NERSC Strategic Plan Is Now Online June 3, 2013 The NERSC Strategic Plan for FY2014-2023 is now available for download (PDF | 3.2MB). Requested by the DOE Office of Advanced Scientific Computing Research as input for ASCR's long-term planning, the strategic plan discusses NERSC's mission, goals, science drivers, planned initiatives, and technology strategy, among other topics. ≫More NERSC publications and reports. About NERSC and Berkeley Lab The National Energy

  14. One Vaccine Leads to Another

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    One Vaccine Leads to Another Print Diphtheria is a potentially lethal respiratory disease that is fairly well controlled by vaccines discovered early last century. These vaccines have been extremely effective; studies on one vaccine in particular, the nontoxic form of the diphtheria toxin (DT), have informed other vaccines. Recently, researchers at Novartis GNF solved several structures of a nontoxic DT using data obtained at ALS Beamline 5.0.3, resolving a long-standing scientific puzzle and

  15. Gradient maintenance: A new algorithm for fast online replanning

    SciTech Connect (OSTI)

    Ahunbay, Ergun E. Li, X. Allen

    2015-06-15

    Purpose: Clinical use of online adaptive replanning has been hampered by the unpractically long time required to delineate volumes based on the image of the day. The authors propose a new replanning algorithm, named gradient maintenance (GM), which does not require the delineation of organs at risk (OARs), and can enhance automation, drastically reducing planning time and improving consistency and throughput of online replanning. Methods: The proposed GM algorithm is based on the hypothesis that if the dose gradient toward each OAR in daily anatomy can be maintained the same as that in the original plan, the intended plan quality of the original plan would be preserved in the adaptive plan. The algorithm requires a series of partial concentric rings (PCRs) to be automatically generated around the target toward each OAR on the planning and the daily images. The PCRs are used in the daily optimization objective function. The PCR dose constraints are generated with dose–volume data extracted from the original plan. To demonstrate this idea, GM plans generated using daily images acquired using an in-room CT were compared to regular optimization and image guided radiation therapy repositioning plans for representative prostate and pancreatic cancer cases. Results: The adaptive replanning using the GM algorithm, requiring only the target contour from the CT of the day, can be completed within 5 min without using high-power hardware. The obtained adaptive plans were almost as good as the regular optimization plans and were better than the repositioning plans for the cases studied. Conclusions: The newly proposed GM replanning algorithm, requiring only target delineation, not full delineation of OARs, substantially increased planning speed for online adaptive replanning. The preliminary results indicate that the GM algorithm may be a solution to improve the ability for automation and may be especially suitable for sites with small-to-medium size targets surrounded by

  16. Pore size distribution and accessible pore size distribution...

    Office of Scientific and Technical Information (OSTI)

    both rank and type (expressed as either hydrogen or vitrinite content) in the size range ... Subject: 01 COAL, LIGNITE, AND PEAT; 03 NATURAL GAS; 08 HYDROGEN; AMBIENT TEMPERATURE; ...

  17. Review of trigger and on-line processors at SLAC

    SciTech Connect (OSTI)

    Lankford, A.J.

    1984-07-01

    The role of trigger and on-line processors in reducing data rates to manageable proportions in e/sup +/e/sup -/ physics experiments is defined not by high physics or background rates, but by the large event sizes of the general-purpose detectors employed. The rate of e/sup +/e/sup -/ annihilation is low, and backgrounds are not high; yet the number of physics processes which can be studied is vast and varied. This paper begins by briefly describing the role of trigger processors in the e/sup +/e/sup -/ context. The usual flow of the trigger decision process is illustrated with selected examples of SLAC trigger processing. The features are mentioned of triggering at the SLC and the trigger processing plans of the two SLC detectors: The Mark II and the SLD. The most common on-line processors at SLAC, the BADC, the SLAC Scanner Processor, the SLAC FASTBUS Controller, and the VAX CAMAC Channel, are discussed. Uses of the 168/E, 3081/E, and FASTBUS VAX processors are mentioned. The manner in which these processors are interfaced and the function they serve on line is described. Finally, the accelerator control system for the SLC is outlined. This paper is a survey in nature, and hence, relies heavily upon references to previous publications for detailed description of work mentioned here. 27 references, 9 figures, 1 table.

  18. ARM - Measurement - Particle size distribution

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    size distribution ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Particle size distribution The number of particles present in any given volume of air within a specified size range. Categories Aerosols Instruments The above measurement is considered scientifically relevant for the following instruments. Refer to the datastream (netcdf) file headers of each instrument for a list of all available

  19. NATIONAL LEAD COMPANY OF OHIO

    Office of Legacy Management (LM)

    ~y-f-hjLo-- yy; 4: j ).,Ic +- NATIONAL LEAD COMPANY OF OHIO s _ HEALTH AND SAFETY DIVISION - ANALYTICAL DEPT. . ANALYTICAL DATA SHEET o-0 1. H. NO. TRIAL, HYGIENE AND RADIATION DEPT. AMPLE Nti.1. //- 6:itEC TEDI it/;/L 5 .,- -..-- -- -.._-. -. I --- --- 1 ANALYTICA .OATE RECeiVEDi mri /-2-v& 3 Li >,a. HCJ _-..k.-*..- -.v._ 1 NO. DISTRIBUTION OF COPIES 1 Analytlcal Labwatwy (RECORD COPP) 2 Industrial Hygiene 8 Radlation Dept. . 3' Water Treatment Plant (Far Water Smmplos Only)' t' , /,' 30

  20. Glitter-Sized Solar Photovoltaics

    Broader source: Energy.gov [DOE]

    Featured in this photograph are tiny glitter-sized photovoltaic cells, developed by Sandia National Laboratories scientists, that could revolutionize the way solar energy is collected and used....

  1. ARM - Measurement - Hydrometeor Size Distribution

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of hydrometeors observed in a given size range. Categories Atmospheric State, Cloud Properties Instruments The above measurement is considered scientifically relevant for the...

  2. What is lead-based paint

    SciTech Connect (OSTI)

    Vernon, L.S.

    1994-03-01

    The number of variety of lead-abatement regulations and requirements make it difficult and confusing to identify and properly respond to dangerous levels of lead in every situation. Definitions of lead-based paint'' and three test methods for lead detection are described to help determine when and how to test for the presence of lead.

  3. Comparison of leading parallel NAS file systems on commodity hardware

    SciTech Connect (OSTI)

    Hedges, R; Fitzgerald, K; Gary, M; Stearman, D M

    2010-11-08

    High performance computing has experienced tremendous gains in system performance over the past 20 years. Unfortunately other system capabilities, such as file I/O, have not grown commensurately. In this activity, we present the results of our tests of two leading file systems (GPFS and Lustre) on the same physical hardware. This hardware is the standard commodity storage solution in use at LLNL and, while much smaller in size, is intended to enable us to learn about differences between the two systems in terms of performance, ease of use and resilience. This work represents the first hardware consistent study of the two leading file systems that the authors are aware of.

  4. NATIONAL LEAD COMPANY OF OHIO

    Office of Legacy Management (LM)

    t-t AL- 1. + T fi r,y* t ,.- . NATIONAL LEAD COMPANY OF OHIO Of~~l=l i iy Ci)wp HEALTH AND SAFETY DIVISION - ANALYTICAL DEPT. ANALYTICAL DATA SHEET U-G b ;33y jl:tL G c-w &3(/y I 53 .3 Y5 .y j.os-- ! stz77y t3r1: my I CLvru' f<? 3;/ ' > j!OS ! I I I 1 P-/) ' If I , m 6.3 Lg- /&IL -q-&.+&L, /I a V Q/);: /(Lx 3L- NO. DISTRIBUTION OF COPIES 1 Analytical Laboratory (RECORD COPY) 2 Industrial Hygiene 8 Radiation Dept. Plnnt NLO-HbS-736 IREV. lo/:m4/601 - -_.-__- - ---

  5. Multi-lead heat sink

    DOE Patents [OSTI]

    Roose, L.D.

    1982-08-25

    The disclosure relates to a heat sink used to protect integrated circuits from the heat resulting from soldering them to circuit boards. A tubular housing contains a slidable member which engages somewhat inwardly extending connecting rods, each of which is rotatably attached at one end to the bottom of the housing. The other end of each rod is fastened to an expandable coil spring loop. As the member is pushed downward in the housing, its bottom edge engages and forces outward the connecting rods, thereby expanding the spring so that it will fit over an integrated circuit. After the device is in place, the member is slid upward and the spring contracts about the leads of the integrated circuit. Soldering is now conducted and the spring absorbs excess heat therefrom to protect the integrated circuit. The placement steps are repeated in reverse order to remove the heat sink for use again.

  6. Multi-lead heat sink

    DOE Patents [OSTI]

    Roose, L.D.

    1984-07-03

    The disclosure relates to a heat sink used to protect integrated circuits from the heat resulting from soldering them to circuit boards. A tubular housing contains a slidable member which engages somewhat inwardly extending connecting rods, each of which is rotatably attached at one end to the bottom of the housing. The other end of each rod is fastened to an expandable coil spring loop. As the member is pushed downward in the housing, its bottom edge engages and forces outward the connecting rods, thereby expanding the spring so that it will fit over an integrated circuit. After the device is in place, the member is slid upward and the spring contracts about the leads of the integrated circuit. Soldering is now conducted and the spring absorbs excess heat therefrom to protect the integrated circuit. The placement steps are repeated in reverse order to remove the heat sink for use again. 4 figs.

  7. Multi-lead heat sink

    DOE Patents [OSTI]

    Roose, Lars D.

    1984-01-01

    The disclosure relates to a heat sink used to protect integrated circuits from the heat resulting from soldering them to circuit boards. A tubular housing contains a slidable member which engages somewhat inwardly extending connecting rods, each of which is rotatably attached at one end to the bottom of the housing. The other end of each rod is fastened to an expandable coil spring loop. As the member is pushed downward in the housing, its bottom edge engages and forces outward the connecting rods, thereby expanding the spring so that it will fit over an integrated circuit. After the device is in place, the member is slid upward and the spring contracts about the leads of the integrated circuit. Soldering is now conducted and the spring absorbs excess heat therefrom to protect the integrated circuit. The placement steps are repeated in reverse order to remove the heat sink for use again.

  8. Prokaryotic Genomes from Microbes Online Database

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Alm, Eric J.; Huang, Katherine H.; Price, Morgan N.; Koche, Richard P.; Keller, Keith; Dubchak, Inna L.; Arkin, Adam P.

    To describe the potential functions of genes, MicrobesOnline includes protein family analyses (from InterPro and COG), metabolic maps (from KEGG), links to research papers (from UniProt and PubMed), and operon predictions for every genome. To examine each gene's evolutionary history, MicrobesOnline includes precomputed phylogenetic trees for all the gene families. It displays gene trees with genomic context or it compares the gene tree to the species tree. The tools provided with MicrobesOnline allow users to: compute customized motifs, sequence alignments, and phylogenetic trees change expression patterns in metabolic maps annotate genes in various ways The database contains more than 430 genomes. A browse tree tool and a genome browser are available, along with specialized search capabilities. (Specialized Interface)

  9. Lead phosphate glass compositions for optical components

    DOE Patents [OSTI]

    Sales, Brian C.; Boatner, Lynn A.

    1987-01-01

    A lead phosphate glass to which has been added indium oxide or scandium oe to improve chemical durability and provide a lead phosphate glass with good optical properties.

  10. David Skinner Named NERSC Strategic Partnerships Lead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    David Skinner Named NERSC Strategic Partnerships Lead David Skinner Named NERSC Strategic Partnerships Lead January 24, 2014 Contact: Linda Vu, +1 510 495 2402, lvu@lbl.gov...

  11. Downregulation of Cinnamyl Alcohol Dehydrogenase (CAD) Leads...

    Office of Scientific and Technical Information (OSTI)

    (CAD) Leads to Improved Saccharification Efficiency in Switchgrass Citation Details In-Document Search Title: Downregulation of Cinnamyl Alcohol Dehydrogenase (CAD) Leads ...

  12. Distributed Generation Lead-by-Example Resources

    Broader source: Energy.gov [DOE]

    State governments can lead by example by promoting renewable energy programs and policies. Efforts to lead by example include using renewable energy resources (including alternative fuel for...

  13. Heavy Isotopes Lead Materials Management Organization (LMMO)...

    Office of Scientific and Technical Information (OSTI)

    Heavy Isotopes Lead Materials Management Organization (LMMO) Update Citation Details In-Document Search Title: Heavy Isotopes Lead Materials Management Organization (LMMO) Update ...

  14. Low Emissions Asian Development (LEAD) Program - Bangladesh ...

    Open Energy Info (EERE)

    Low Emissions Asian Development (LEAD) Program - Bangladesh Redirect page Jump to: navigation, search REDIRECT Low Emissions Asian Development (LEAD) Program Retrieved from...

  15. Cities Leading through Energy Analysis and Planning

    Broader source: Energy.gov [DOE]

    The Cities Leading through Energy Analysis and Planning (Cities-LEAP) project delivers standardized, localized energy data and analysis that enables cities to lead clean energy innovation and...

  16. Dissolution of lead paint in aqueous solutions

    SciTech Connect (OSTI)

    Barnes, G.L.; Davis, A.P.

    1996-07-01

    An analysis of the rate and extent of lead leaching from a lead-based paint was completed. At low-solution pH, dissolution was rapid and approached 80% of the total lead. Residual lead can be estimated based on the predicted solubility of lead carbonate and basic lead carbonate. Release of lead from the paint was slower than that from pure basic lead carbonate due to inhibition by the paint matrix. Although the dissolved concentration of lead in solution at neutral/high pH was low, the paint binder was apparently destroyed at these pH values, releasing colloidal lead pigment particles. The presence of ethylenediaminetetraacetic acid (EDTA) and nitrilotriacetic acid (NTA) enhanced both the rate and degree of lead dissolution, while benzoic acid had a minimal effect.

  17. An Insoluble Titanium-Lead Anode for Sulfate Electrolytes

    SciTech Connect (OSTI)

    Ferdman, Alla

    2005-05-11

    The project is devoted to the development of novel insoluble anodes for copper electrowinning and electrolytic manganese dioxide (EMD) production. The anodes are made of titanium-lead composite material produced by techniques of powder metallurgy, compaction of titanium powder, sintering and subsequent lead infiltration. The titanium-lead anode combines beneficial electrochemical behavior of a lead anode with high mechanical properties and corrosion resistance of a titanium anode. In the titanium-lead anode, the titanium stabilizes the lead, preventing it from spalling, and the lead sheathes the titanium, protecting it from passivation. Interconnections between manufacturing process, structure, composition and properties of the titanium-lead composite material were investigated. The material containing 20-30 vol.% of lead had optimal combination of mechanical and electrochemical properties. Optimal process parameters to manufacture the anodes were identified. Prototypes having optimized composition and structure were produced for testing in operating conditions of copper electrowinning and EMD production. Bench-scale, mini-pilot scale and pilot scale tests were performed. The test anodes were of both a plate design and a flow-through cylindrical design. The cylindrical anodes were composed of cylinders containing titanium inner rods and fitting over titanium-lead bushings. The cylindrical design allows the electrolyte to flow through the anode, which enhances diffusion of the electrolyte reactants. The cylindrical anodes demonstrate higher mass transport capabilities and increased electrical efficiency compared to the plate anodes. Copper electrowinning represents the primary target market for the titanium-lead anode. A full-size cylindrical anode performance in copper electrowinning conditions was monitored over a year. The test anode to cathode voltage was stable in the 1.8 to 2.0 volt range. Copper cathode morphology was very smooth and uniform. There was no

  18. Method for sizing hollow microspheres

    DOE Patents [OSTI]

    Farnum, E.H.; Fries, R.J.

    1975-10-29

    Hollow Microspheres may be effectively sized by placing them beneath a screen stack completely immersed in an ultrasonic bath containing a liquid having a density at which the microspheres float and ultrasonically agitating the bath.

  19. Deployment Support Leading to Implementation

    SciTech Connect (OSTI)

    E. E. Cook

    1997-10-01

    The following paragraphs summarize the progress of each research project funded under the WVU Cooperative Agreement during the third quarter of 1997 (July - September 1997). The projects are arranged according to their 1997 WVU task number. WVU Focus Area 1.0: Subsurface Contaminants, Containment and Remediation Task No. 1.1: Project discontinued. Task No. 1.2: Development of Standard Test Protocols and Barrier Design Models for Desiccation Barriers (K. Amininan & S. Ameri): A number of experiments were preformed this period to evaluate the ability of the dried sand-packs to act as a barrier to liquids. Water infiltration tests were done with a constant head, dispersing 80 ml of water, and by adding water in small increments. Results indicate that when the water is spilled over the sand-pack, it has the tendency to channel through the sand-pack, significantly reducing the capacity of the dried zone to retain liquid contaminants. This appears to be largely influenced by particle size. As the particle size is reduced, the capillary forces spread the water and prevent/delay channels from forming. The measured permeability values were in agreement with those measured with air. The water retention capacity and capillary rise were largely influenced by time and showed no sensitivity to channeling. The water retention capacity tests suggest the sand-packs can retain more water than the expected. Two sets of water infiltration and drying experiments were designed to evaluate the CAB�s ability to prevent spills from spreading. Ten ml of water was injected every 20 minutes and 80 ml of water was added at one time. When injected slowly, results showed the drying process to be similar to the original drying process. The second set indicted the drying process follows a slowly declining drying with no break through. Results also suggested that air flow through the sand-pack can remove water infiltration. The air flow appeared to prevent any water channeling and thus should

  20. Results from the Cooler and Lead Tests

    SciTech Connect (OSTI)

    Green, Michael A

    2010-06-10

    The report presents the results of testing MICE spectrometer magnet current leads on a test apparatus that combines both the copper leads and the high temperature superconducting (HTS) leads with a single Cryomech PT415 cooler and liquid helium tank. The current is carried through the copper leads from 300 K to the top of the HTS leads. The current is then carried through the HTS leads to a feed-through from the vacuum space to the inside of a liquid helium tank. The experiment allows one to measure the performance of both cooler stages along with the performance of the leads. While the leads were powered we measured the voltage drops through the copper leads, through the HTS leads, through spliced to the feed-through, through the feed-through and through the low-temperature superconducting loop that connects one lead to the other. Measurements were made using the leads that were used in spectrometer magnet 1A and spectrometer magnet 2A. These are the same leads that were used for Superbend and Venus magnets at LBNL. The IL/A for these leads was 5.2 x 10{sup 6} m{sup -1}. The leads turned out to be too long. The same measurements were made using the leads that were installed in magnet 2B. The magnet 2B leads had an IL/A of 3.3 x 10{sup 6} A m{sup -1}. This report discusses the cooler performance and the measured electrical performance of the lead circuit that contains the copper leads and the superconducting leads. All of the HTS leads that were installed in magnet 2B were current tested using this apparatus.

  1. RRC - Drilling Permits Online Filing User's Guide webpage | Open...

    Open Energy Info (EERE)

    Drilling Permits Online Filing User's Guide webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: RRC - Drilling Permits Online Filing User's Guide...

  2. Comparing Appliance and Lighting Energy Costs Online Just Got...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Appliance and Lighting Energy Costs Online Just Got Easier Comparing Appliance and Lighting Energy Costs Online Just Got Easier January 11, 2013 - 10:12am Addthis The EnergyGuide...

  3. Online Journal for E&P Geoscientists | Open Energy Information

    Open Energy Info (EERE)

    2012 DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for Online Journal for E&P Geoscientists Citation AAPG Data PagesSearch and...

  4. SWS Online Tool now includes Multifamily Content, plus a How...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SWS Online Tool now includes Multifamily Content, plus a How-To Webinar SWS Online Tool now includes Multifamily Content, plus a How-To Webinar This announcement contains ...

  5. New Online Tools Showcase Efficient Technologies and Deployment Case

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Studies | Department of Energy New Online Tools Showcase Efficient Technologies and Deployment Case Studies New Online Tools Showcase Efficient Technologies and Deployment Case Studies September 29, 2015 - 12:49pm Addthis New Online Tools Showcase Efficient Technologies and Deployment Case Studies The Federal Energy Management Program (FEMP) released two new online tools to help agencies choose energy- and water-efficient technologies and products for deployment in federal facilities. Now

  6. New Online Training Courses Help Agencies Understand Renewable Tech |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Online Training Courses Help Agencies Understand Renewable Tech New Online Training Courses Help Agencies Understand Renewable Tech March 2, 2015 - 10:30am Addthis Free, online training courses on <a href="https://www4.eere.energy.gov/femp/training/?keyword=&series[0]=93">Renewable Energy Technology Applications</a> are available through the Federal Energy Management Program. Free, online training courses on Renewable Energy Technology

  7. DOE Jobs Online (Hiring Manager), Office of Human Capitol Management

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Innovation and Solutions | Department of Energy Jobs Online (Hiring Manager), Office of Human Capitol Management Innovation and Solutions DOE Jobs Online (Hiring Manager), Office of Human Capitol Management Innovation and Solutions DOE Jobs Online (Hiring Manager), Office of Human Capitol Management Innovation and Solutions DOE Jobs Online (Hiring Manager), Office of Human Capitol Management Innovation and Solutions (1.46 MB) More Documents & Publications PIA - GovTrip (DOE data) LM

  8. Photovoltaic Online Training Course for Code Officials | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Photovoltaic Online Training Course for Code Officials Photovoltaic Online Training Course for Code Officials The Photovoltaic Online Training Course for Code Officials is a free online training tool for those officials who conduct reviews and inspections of residential PV systems. Throughout the course's 7 page-turner lessons and 3D interactive Capstone lesson, major topics of concern for field inspection and expedited permitting are covered. In September 2015, an updated version of

  9. High-temperature superconducting current leads

    SciTech Connect (OSTI)

    Niemann, R.C.

    1995-03-01

    Use of high-temperature superconductors (HTSs) for current leads to deliver power to devices at liquid helium temperature can reduce refrigeration requirements to values significantly below those achievable with conventional leads. HTS leads are now near commercial realization. Argonne National Laboratory (ANL) has developed a sinter-forge process to fabricate current leads from bismuth-based superconductors. The current-carrying capacity of these leads is five times better than that of HTS leads made by a conventional fabrication process. ANL along with Superconductivity, Inc., has developed a 1500 ampere current lead for an existing superconducting magnetic energy storage (SMES) device. With Babcock & Wilcox Company, Argonne is creating 16-kiloampere leads for use in a 0.5 MWh SMES. In a third project Argonne performed characterization testing of a existing, proprietary conduction-cooled lead being developed by Zer Res Corp.

  10. Online adaptation and verification of VMAT

    SciTech Connect (OSTI)

    Crijns, Wouter; Defraene, Gilles; Depuydt, Tom; Haustermans, Karin; Van Herck, Hans; Maes, Frederik; Van den Heuvel, Frank

    2015-07-15

    Purpose: This work presents a method for fast volumetric modulated arc therapy (VMAT) adaptation in response to interfraction anatomical variations. Additionally, plan parameters extracted from the adapted plans are used to verify the quality of these plans. The methods were tested as a prostate class solution and compared to replanning and to their current clinical practice. Methods: The proposed VMAT adaptation is an extension of their previous intensity modulated radiotherapy (IMRT) adaptation. It follows a direct (forward) planning approach: the multileaf collimator (MLC) apertures are corrected in the beam’s eye view (BEV) and the monitor units (MUs) are corrected using point dose calculations. All MLC and MU corrections are driven by the positions of four fiducial points only, without need for a full contour set. Quality assurance (QA) of the adapted plans is performed using plan parameters that can be calculated online and that have a relation to the delivered dose or the plan quality. Five potential parameters are studied for this purpose: the number of MU, the equivalent field size (EqFS), the modulation complexity score (MCS), and the components of the MCS: the aperture area variability (AAV) and the leaf sequence variability (LSV). The full adaptation and its separate steps were evaluated in simulation experiments involving a prostate phantom subjected to various interfraction transformations. The efficacy of the current VMAT adaptation was scored by target mean dose (CTV{sub mean}), conformity (CI{sub 95%}), tumor control probability (TCP), and normal tissue complication probability (NTCP). The impact of the adaptation on the plan parameters (QA) was assessed by comparison with prediction intervals (PI) derived from a statistical model of the typical variation of these parameters in a population of VMAT prostate plans (n = 63). These prediction intervals are the adaptation equivalent of the tolerance tables for couch shifts in the current clinical

  11. University Competition Leads to Geothermal Breakthroughs

    Broader source: Energy.gov [DOE]

    Learn how students are leading groundbreaking research to help expand the development of America's vast geothermal energy resources.

  12. Clean Lead Facility (CLF) Inventory System

    Energy Science and Technology Software Center (OSTI)

    1995-07-13

    The CLF Inventory System records shipments of clean or nonradioactive contaminated lead stored at the CLF. The Inventory System provides reports and inventory information to Facility operators. Annual, quarterly, monthly, and current inventory reports may be printed. Profile reports of each shipment of lead may also be printed for verification and documentation of lead transactions.

  13. Automatic identification of abstract online groups

    DOE Patents [OSTI]

    Engel, David W; Gregory, Michelle L; Bell, Eric B; Cowell, Andrew J; Piatt, Andrew W

    2014-04-15

    Online abstract groups, in which members aren't explicitly connected, can be automatically identified by computer-implemented methods. The methods involve harvesting records from social media and extracting content-based and structure-based features from each record. Each record includes a social-media posting and is associated with one or more entities. Each feature is stored on a data storage device and includes a computer-readable representation of an attribute of one or more records. The methods further involve grouping records into record groups according to the features of each record. Further still the methods involve calculating an n-dimensional surface representing each record group and defining an outlier as a record having feature-based distances measured from every n-dimensional surface that exceed a threshold value. Each of the n-dimensional surfaces is described by a footprint that characterizes the respective record group as an online abstract group.

  14. 120201 Globus Online NERSC.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    globus online Reliable, high-performance file transfer ...as a service Steve Tuecke Computation Institute University of Chicago and Argonne National Laboratory www.globusonline.org * What should be trivial... The Challenge: Moving Big Data Easily 2 * ... can be painfully tedious and time-consuming "I need my data over there - at my _____" ( supercomputing center, campus server, etc.) Data Source Data Destination ! C onfig i ssues ! Unexpected failure = m anual r etry Data Source Data

  15. Strategy Guideline: HVAC Equipment Sizing

    SciTech Connect (OSTI)

    Burdick, A.

    2012-02-01

    The heating, ventilation, and air conditioning (HVAC) system is arguably the most complex system installed in a house and is a substantial component of the total house energy use. A right-sized HVAC system will provide the desired occupant comfort and will run efficiently. This Strategy Guideline discusses the information needed to initially select the equipment for a properly designed HVAC system. Right-sizing of an HVAC system involves the selection of equipment and the design of the air distribution system to meet the accurate predicted heating and cooling loads of the house. Right-sizing the HVAC system begins with an accurate understanding of the heating and cooling loads on a space; however, a full HVAC design involves more than just the load estimate calculation - the load calculation is the first step of the iterative HVAC design procedure. This guide describes the equipment selection of a split system air conditioner and furnace for an example house in Chicago, IL as well as a heat pump system for an example house in Orlando, Florida. The required heating and cooling load information for the two example houses was developed in the Department of Energy Building America Strategy Guideline: Accurate Heating and Cooling Load Calculations.

  16. Apparatus and methods for purifying lead

    DOE Patents [OSTI]

    Tunison, Harmon M.

    2016-01-12

    Disclosed is an exemplary method of purifying lead which includes the steps of placing lead and a fluoride salt blend in a container; forming a first fluid of molten lead at a first temperature; forming a second fluid of the molten fluoride salt blend at a second temperature higher than the first temperature; mixing the first fluid and the second fluid together; separating the two fluids; solidifying the molten fluoride salt blend at a temperature above a melting point of the lead; and removing the molten lead from the container. In certain exemplary methods the molten lead is removed from the container by decanting. In still other exemplary methods the molten salt blend is a Lewis base fluoride eutectic salt blend, and in yet other exemplary methods the molten salt blend contains sodium fluoride, lithium fluoride, and potassium fluoride.

  17. David Skinner Named NERSC Strategic Partnerships Lead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    David Skinner Named NERSC Strategic Partnerships Lead David Skinner Named NERSC Strategic Partnerships Lead January 24, 2014 Contact: Linda Vu, +1 510 495 2402, lvu@lbl.gov XBD201102-00089.jpg David Skinner This month, the National Energy Research Scientific Computing Center (NERSC) created a new position-Strategic Partnerships Lead, to identify new science communities that can benefit from NERSC resources. David Skinner, former head of NERSC's Outreach Software and Programming Group (OSP), has

  18. Property:LeadAgency | Open Energy Information

    Open Energy Info (EERE)

    Subproperties This property has the following 1 subproperty: R RAPIDRoadmap9-FD-k Pages using the property "LeadAgency" Showing 25 pages using this property. (previous...

  19. Facilities Electrician & Lead Electrician | Princeton Plasma...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    performing electrical work: Electrician10 years; and LEAD Electrician15 years of experience required 2. Thorough understanding of the National Electric Code. 3. Demonstrated ...

  20. Construction Branch Electrician & Lead Electrician | Princeton...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Construction Branch Electrician & Lead Electrician Department: Engineering Supervisor(s): ... devices, and assist with the construction and repair of facilities on the PPPL campus. ...

  1. Hazen Named Storage Systems Group Lead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hazen Named Storage Systems Group Lead Hazen Named Storage Systems Group Lead May 10, 2016 Damian Hazen Damian Hazen Damian Hazen, who has been with NERSC since 2001, has been named group lead for the Storage Systems Group. Hazen has been acting lead since last October, taking over for Jason Hick, who recently left NERSC to take a position at Los Alamos National Laboratory. During his time at NERSC, Hazen has worked primarily in the Storage Systems Group as an administrator and programmer for

  2. Compatibility of PETN with lead azide

    SciTech Connect (OSTI)

    Hurd, R.; Fronabarger, J.W.; Johnson, R.; Fleming, W.

    1983-01-01

    The compatibility of PETN with lead azide at elevated temperatures has been investigated. Ramped and isothermal DSC methods were used to obtain energies of activation at temperatures above the melting point of PETN. Mixtures were found to show exothermic activity at lower temperatures than pure PETN. High Pressure Liquid Chromatography was used to follow the decomposition of PETN and PETN/lead azide mixtures at temperatures below the melting point. Reaction below 120/sup 0/C appeared minimal, while at higher temperatures, both PETN and PETN/lead azide mixtures showed degradation. A PETN/lead azide sample exploded at or near the melting point of PETN.

  3. LEAD SUBSTITUTION AND ELIMINATION STUDY, PART II

    SciTech Connect (OSTI)

    T. MARTINEZ; M. COURNOYER

    2001-01-01

    Within the Nuclear Materials Technology Division of Los Alamos National Laboratory, lead is used as shielding for a variety of operations, including actinide chemistry, weapons production, radiochemistry, and analytical chemistry. In this study, waste minimization issues associated with replacing lead shielding with non-hazardous materials are addressed. These include institutional program available to support this effort, the hazards and accompanying controls grouped with lead shielding, operations that use lead bricks and how this effects the selection of the substitute. Life cycle management issues are also examined. As a final step, an approach to get buy-in from both technical and budget minded employees is presented.

  4. DOE-EPRI On-Line Monitoring Implementation Guidelines

    SciTech Connect (OSTI)

    E. Davis, R. Bickford

    2003-01-02

    Industry and EPRI experience at several plants has shown on-line monitoring to be very effective in identifying out-of-calibration instrument channels or indications of equipment-degradation problems. The EPRI implementation project for on-line monitoring has demonstrated the feasability of on-line monitoring at several participating nuclear plants. The results have been very enouraging, and substantial progress is anticipated in the coming years.

  5. Online Classified or Controlled Information Mini-Lessons | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Online Classified or Controlled Information Mini-Lessons Online Classified or Controlled Information Mini-Lessons These online lessons are short animated lessons to provide you with a quick refresher on some aspect of classified or controlled information. If there is a particular aspect of classified or controlled information you would like addressed in a lesson, please contact the Outreach Program at (301) 903-5767 or outreach@hq.doe.gov. Classified Information Marking Classified

  6. Globus Online File Transfer - NERSC Tutorial - March 8, 2011

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    globusonline.org globus online Reliable File Transfer. No IT Required. NERSC File Transfer Tutorial Steve Tuecke Deputy Director, Computation Institute University of Chicago & Argonne National Laboratory 2 globusonline.org Globus Toolkit Build the Grid Components for building custom grid solutions globustoolkit.org Globus Online Use the Grid Reliable file transfer Software-as-a-Service globusonline.org Some context 3 globusonline.org Globus Online In Action 28.6 Terabytes 31,000 files 56h

  7. New Online Tool Expands Analysis of Biofuels' Water Impact | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Online Tool Expands Analysis of Biofuels' Water Impact New Online Tool Expands Analysis of Biofuels' Water Impact January 23, 2015 - 2:25pm Addthis Last week, Argonne National Laboratory released a new version of the Water Assessment for Transportation Energy Resources (WATER) online tool. As with the previous two versions, WATER 3.0 quantifies the water footprint of various biofuel pathways, providing details of the water consumption required for the production of biofuels.

  8. DOE Announces International Agreement on Global Science Online Gateway |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy International Agreement on Global Science Online Gateway DOE Announces International Agreement on Global Science Online Gateway June 12, 2008 - 1:30pm Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) today announced the establishment of a multilateral alliance to govern the rapidly growing online gateway to international scientific research information--WorldWideScience.org. Officials from organizations representing 38 countries formalized their commitment

  9. January 2014 Cybersecurity Awareness Campaign - Secure Online Shopping |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 4 Cybersecurity Awareness Campaign - Secure Online Shopping January 2014 Cybersecurity Awareness Campaign - Secure Online Shopping The January 2014 Cybersecurity Awareness Campaign featured issues surrounding secure online shopping. For more information on privacy issues, contact Jerry Hanley at Jerry.Hanley@hq.doe.gov. For information on Supply Chain Risk Management, contact Sue Farrand at Susan.Farrand@hq.doe.gov. Cybersecurity Front Burner Issue 15 (275.24 KB) 2014

  10. P_Stub_Online-PIA.pdf

    Energy Savers [EERE]

    PV Value PV Value PV Value Sandia National Laboratories has developed a prospective model of determining the value of PV. Sandia uses an income capitalization approach, which considers the present value of future energy production to determine the remaining value of a PV system. An online tool developed by Energy Sense Finance, has been released to the public. https://www.pvvalue.com/ PV Value (332.15 KB) More Documents & Publications PV Value® Reduce Risk, Increase Clean Energy: How States

  11. Arizona Online Environmental Review Tool | Open Energy Information

    Open Energy Info (EERE)

    Online Environmental Review ToolInfo GraphicMapChart Abstract The Arizona Game and Fish Department's Heritage Data Management System (HDMS) and Project Evaluation Program...

  12. WSDE Online System for Registering UIC Wells webpage | Open Energy...

    Open Energy Info (EERE)

    developers to register their UIC wells online. Author Washington State Department of Ecology Published Washington State Department of Ecology, 2014 DOI Not Provided Check for DOI...

  13. Hawaii Wastewater Branch Online Application Webpage | Open Energy...

    Open Energy Info (EERE)

    Application Webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Hawaii Wastewater Branch Online Application Webpage Author State of Hawaii...

  14. Web Mapping and Online GIS Applications for Renewable Energy...

    Open Energy Info (EERE)

    for Renewable Energy Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Web Mapping and Online GIS Applications for Renewable Energy AgencyCompany Organization:...

  15. DOE Announces Webinars on Alternative Fuel Online Tools and Resources...

    Office of Environmental Management (EM)

    Alternative Fuel Online Tools and Resources, Plug-In Electric Vehicle Standards and Market Development, and ... on Integrating Hydrogen and Fuel Cell Technologies, a Site Selection ...

  16. CAIRS Direct Data Entry (CDDE) Online Training Package | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Direct Data Entry (CDDE) Online Training Package CAIRS Direct Data Entry (CDDE) Online Training Package June 2014 CAIRS Direct Data Entry (CDDE) Online Training Package This self-paced tutorial is designed to instruct users on how to utilize CDDE features to compile and submit CAIRS reports (DOE Form 5484.3 and DOE Form 5484.4). Step-by-step instructions are provided for entering accident and exposure information through a graphical-user-interface. The on-line training consists of the

  17. Online Sensor Calibration Assessment in Nuclear Power Systems

    SciTech Connect (OSTI)

    Coble, Jamie B.; Ramuhalli, Pradeep; Meyer, Ryan M.; Hashemian, Hash

    2013-06-01

    Safe, efficient, and economic operation of nuclear systems (nuclear power plants, fuel fabrication and storage, used fuel processing, etc.) relies on transmission of accurate and reliable measurements. During operation, sensors degrade due to age, environmental exposure, and maintenance interventions. Sensor degradation can affect the measured and transmitted signals, including sensor failure, signal drift, sensor response time, etc. Currently, periodic sensor recalibration is performed to avoid these problems. Sensor recalibration activities include both calibration assessment and adjustment (if necessary). In nuclear power plants, periodic recalibration of safety-related sensors is required by the plant technical specifications. Recalibration typically occurs during refueling outages (about every 18 to 24 months). Non-safety-related sensors also undergo recalibration, though not as frequently. However, this approach to maintaining sensor calibration and performance is time-consuming and expensive, leading to unnecessary maintenance, increased radiation exposure to maintenance personnel, and potential damage to sensors. Online monitoring (OLM) of sensor performance is a non-invasive approach to assess instrument calibration. OLM can mitigate many of the limitations of the current periodic recalibration practice by providing more frequent assessment of calibration and identifying those sensors that are operating outside of calibration tolerance limits without removing sensors or interrupting operation. This can support extended operating intervals for unfaulted sensors and target recalibration efforts to only degraded sensors.

  18. Managing lead-based paint abatement wastes

    SciTech Connect (OSTI)

    Steele, N.L.C.

    1994-12-31

    Renovation, remodeling, demolition, and surface preparation for painting, in addition to specified lead abatement, are all activities that have the potential to produce hazardous wastes if a property was painted with lead-based paint. Lead-based paint was used on residential structures until 1978, when most residential uses were banned by the Consumer Products Safety Council. Prior to the 1950s, paints for residential uses may have contained up to 50% lead by weight. Today, commercial and military paints may still contain lead and can be used on non-residential structures. The lead content of residential paints is limited to 0.06% lead (by weight) in the dried film. This paper provides an overview of some of the information needed to properly manage lead-based paint abatement wastes. The issues covered in this paper include waste classification, generator status, treatment, and land disposal restrictions. The author assumes that the reader is familiar with the provision of the Health and Safety Code and the California Code of Regulations that pertain to generation and management of hazardous wastes. Citations provided herein do not constitute an exhaustive list of all the regulations with which a generator of hazardous waste must comply.

  19. Distributed electrical leads for thermionic converter

    DOE Patents [OSTI]

    Fitzpatrick, Gary O.; Britt, Edward J.

    1979-01-01

    In a thermionic converter, means are provided for coupling an electrical lead to at least one of the electrodes thereof. The means include a bus bar and a plurality of distributed leads coupled to the bus bar each of which penetrates through one electrode and are then coupled to the other electrode of the converter in spaced apart relation.

  20. Fan-fold shielded electrical leads

    DOE Patents [OSTI]

    Rohatgi, Rajeev R.; Cowan, Thomas E.

    1996-01-01

    Fan-folded electrical leads made from copper cladded Kapton, for example, with the copper cladding on one side serving as a ground plane and the copper cladding on the other side being etched to form the leads. The Kapton is fan folded with the leads located at the bottom of the fan-folds. Electrical connections are made by partially opening the folds of the fan and soldering, for example, the connections directly to the ground plane and/or the lead. The fan folded arrangement produces a number of advantages, such as electrically shielding the leads from the environment, is totally non-magnetic, and has a very low thermal conductivity, while being easy to fabricate.

  1. Fan-fold shielded electrical leads

    DOE Patents [OSTI]

    Rohatgi, R.R.; Cowan, T.E.

    1996-06-11

    Disclosed are fan-folded electrical leads made from copper cladded Kapton, for example, with the copper cladding on one side serving as a ground plane and the copper cladding on the other side being etched to form the leads. The Kapton is fan folded with the leads located at the bottom of the fan-folds. Electrical connections are made by partially opening the folds of the fan and soldering, for example, the connections directly to the ground plane and/or the lead. The fan folded arrangement produces a number of advantages, such as electrically shielding the leads from the environment, is totally non-magnetic, and has a very low thermal conductivity, while being easy to fabricate. 3 figs.

  2. Cryogenic Current Lead Analysis Model Program

    Energy Science and Technology Software Center (OSTI)

    1992-01-01

    CCLAMP was developed to provide a tool for tha analysis of superconducting or normal current leads used to supply electricity from a warm interface (usually room temperature) to a device at cryogenic temperatures. It determines the heat leak to the cryogenic connection and the mass flow of the cryogen (typically helium) for the lead and installation modelled. It may be used to thermally optimize a lead design for a particular application. The user provides relevantmore » geometry details to model the electrical (length, diameter, superconducting length) and heat exchanger design of the lead (heat transfer coefficient, heat transfer area). It has a transient analysis capability so that lead transients such as cool down, current ramping, flow disruptions, and control simulations can be performed.« less

  3. Lead Coolant Test Facility Development Workshop

    SciTech Connect (OSTI)

    Paul A. Demkowicz

    2005-06-01

    A workshop was held at the Idaho National Laboratory on May 25, 2005, to discuss the development of a next generation lead or lead-alloy coolant test facility. Attendees included representatives from the Generation IV lead-cooled fast reactor (LFR) program, Advanced Fuel Cycle Initiative, and several universities. Several participants gave presentations on coolant technology, existing experimental facilities for lead and lead-alloy research, the current LFR design concept, and a design by Argonne National Laboratory for an integral heavy liquid metal test facility. Discussions were focused on the critical research and development requirements for deployment of an LFR demonstration test reactor, the experimental scope of the proposed coolant test facility, a review of the Argonne National Laboratory test facility design, and a brief assessment of the necessary path forward and schedule for the initial stages of this development project. This report provides a summary of the presentations and roundtable discussions.

  4. Online b-jets tagging at CDF

    SciTech Connect (OSTI)

    Casarsa, M.; Ristori, L.; Amerio, S.; Lucchesi, D.; Pagan Griso, S.; Torre, S.T.; Cortiana, G.; /Padua U., Astron. Dept.

    2007-04-01

    We propose a method to identify b-quark jets at trigger level which exploits recently increased CDF trigger system capabilities. b-quark jets identification is of central interest for the CDF high-P{sub T} physics program, and the possibility to select online b-jets enriched samples can extend the physics reaches especially for light Higgs boson searches where the H {yields} b{bar b} decay mode is dominant. Exploiting new trigger primitives provided by two recent trigger upgrades, the Level2 XFT stereo tracking and the improved Level2 cluster-finder, in conjunction with the existing Silicon Vertex Tracker (SVT), we design an online trigger algorithm aimed at selecting good purity b-jets samples useful for many physics measurements, the most important being inclusive H {yields} b{bar b} searches. We discuss the performances of the proposed b-tagging algorithm which must guarantee reasonable trigger rates at luminosity greater than 2 x 10{sup 32} cm{sup -2}s{sup -1} and provide high efficiency on H {yields} b{bar b} events.

  5. Lead-free precussion primer mixes based on metastable interstitial composite (MIC) technology

    DOE Patents [OSTI]

    Dixon, George P.; Martin, Joe A.; Thompson, Don

    1998-01-01

    A lead-free percussion primer composition and a percussion cup containing e composition. The lead-free percussion primer composition is comprised of a mixture of about 45 wt % aluminum powder having an outer coating of aluminum oxide and molybdenum trioxide powder or a mixture of about 50 wt % aluminum powder having an outer coating of aluminum oxide and polytetrafluoroethylene powder. The aluminum powder, molybdenum trioxide powder and polytetrafluoroethylene powder has a particle size of 0.1 .mu.m or less, more preferably a particle size of from about 200-500 angstroms.

  6. Method for measuring lead concentrations in blood

    DOE Patents [OSTI]

    Nogar, Nicholas S.

    2001-01-01

    Method for measuring lead concentrations in blood. The present invention includes the use of resonant laser ablation to analyze .ltoreq.1 .mu.L (or equivalent mass) samples of blood for lead content. A typical finger prick, for example, yields about 10 .mu.L. Solid samples may also readily be analyzed by resonant laser ablation. The sample is placed on a lead-free, electrically conducting substrate and irradiated with a single, focused laser beam which simultaneously vaporizes, atomizes, and resonantly ionizes an analyte of interest in a sample. The ions are then sorted, collected and detected using a mass spectrometer.

  7. The risk of lead toxicity in homes with lead paint hazard

    SciTech Connect (OSTI)

    Schwartz, J.; Levin, R. )

    1991-02-01

    While lead paint has long been known to be a major source of lead poisoning, only a few small epidemiologic studies have attempted to assess directly the relative risk of lead poisoning due to the presence of lead paint. Using data from over 200,000 screening tests of children in the city of Chicago performed between 1976 and 1980, the relative risks can be quantified for children living in a major urban area. Lead paint was found to be a significant predictor of the probability of a child having lead toxicity. As expected, the reduction in leaded gasoline sales during the period reduced mean blood lead levels and increased the percentage of lead toxic children whose toxicity could be attributed to paint lead. Poisson regression models indicated that with the elimination of leaded gasoline, the relative risk of lead toxicity given lead paint exposure was 5.70 (95% CI, 4.13-7.86) during the winter and fall. The relative risk rose to 12.81 (95% CI, 7.33-22.4) in the spring and 15.8 (95% CI, 8.90-28.1) in the summer, probably due to increased exposure to window wells.

  8. Lightweight, durable lead-acid batteries

    DOE Patents [OSTI]

    Lara-Curzio, Edgar; An, Ke; Kiggans, Jr., James O; Dudney, Nancy J; Contescu, Cristian I; Baker, Frederick S; Armstrong, Beth L

    2013-05-21

    A lightweight, durable lead-acid battery is disclosed. Alternative electrode materials and configurations are used to reduce weight, to increase material utilization and to extend service life. The electrode can include a current collector having a buffer layer in contact with the current collector and an electrochemically active material in contact with the buffer layer. In one form, the buffer layer includes a carbide, and the current collector includes carbon fibers having the buffer layer. The buffer layer can include a carbide and/or a noble metal selected from of gold, silver, tantalum, platinum, palladium and rhodium. When the electrode is to be used in a lead-acid battery, the electrochemically active material is selected from metallic lead (for a negative electrode) or lead peroxide (for a positive electrode).

  9. Lightweight, durable lead-acid batteries

    SciTech Connect (OSTI)

    Lara-Curzio, Edgar; An, Ke; Kiggans, Jr., James O.; Dudney, Nancy J.; Contescu, Cristian I.; Baker, Frederick S.; Armstrong, Beth L.

    2011-09-13

    A lightweight, durable lead-acid battery is disclosed. Alternative electrode materials and configurations are used to reduce weight, to increase material utilization and to extend service life. The electrode can include a current collector having a buffer layer in contact with the current collector and an electrochemically active material in contact with the buffer layer. In one form, the buffer layer includes a carbide, and the current collector includes carbon fibers having the buffer layer. The buffer layer can include a carbide and/or a noble metal selected from of gold, silver, tantalum, platinum, palladium and rhodium. When the electrode is to be used in a lead-acid battery, the electrochemically active material is selected from metallic lead (for a negative electrode) or lead peroxide (for a positive electrode).

  10. Lead Hero Limited | Open Energy Information

    Open Energy Info (EERE)

    Hero Limited Jump to: navigation, search Name: Lead Hero Limited Place: China Product: China-based company that holds a 100% interest in XiAn Lv Jing and a 15.05% interest in...

  11. INEEL Lead Recycling in a Moratorium Environment

    SciTech Connect (OSTI)

    Kooda, K. E.; Galloway, K.; McCray, C. W.; Aitken, D. W.

    2003-02-26

    Since 1999, the Idaho National Engineering and Environmental Laboratory (INEEL) Lead Project successfully recycled over 700,000 pounds of excess INEEL lead to the private sector. On February 14, 2000, the Secretary of Energy, Bill Richardson, formalized the January 12, 2000, moratorium on recycling radioactive scrap metal that prevented the unrestricted release of recycled scrap metals to the private sector. This moratorium created significant problems for the INEEL lead recycling program and associated plans; however, through the cooperative efforts of the INEEL and Idaho State University as well as innovative planning and creative thinking the recycling issues were resolved. This collaboration has recycled over 160,000 pounds of excess lead to Idaho State University with a cost savings of over $.5M.

  12. INEEL Lead Recycling in a Moratorium Environment

    SciTech Connect (OSTI)

    Kooda, Kevin Evan; Mc Cray, Casey William; Aitken, Darren William; Galloway, Kelly

    2003-02-01

    Since 1999, the Idaho National Engineering and Environmental Laboratory (INEEL) Lead Project successfully recycled over 700,000 pounds of excess INEEL lead to the private sector. On February 14, 2000, the Secretary of Energy, Bill Richardson, formalized the January 12, 2000, moratorium on recycling radioactive scrap metal that prevented the unrestricted release of recycled scrap metals to the private sector. This moratorium created significant problems for the INEEL lead recycling program and associated plans; however, through the cooperative efforts of the INEEL and Idaho State University as well as innovative planning and creative thinking the recycling issues were resolved. This collaboration has recycled over 160,000 pounds of excess lead to Idaho State University with a cost savings of over $.5M.

  13. Measurement of the production of neighbouring jets in lead-lead...

    Office of Scientific and Technical Information (OSTI)

    Measurement of the production of neighbouring jets in lead-lead collisions at sNN2.76 TeV with the ATLAS detector Citation Details In-Document Search Title: Measurement of the...

  14. Corrosion by liquid lead and lead-bismuth: experimental results review and analysis

    SciTech Connect (OSTI)

    Zhang, Jinsuo

    2008-01-01

    Liquid metal technologies for liquid lead and lead-bismuth alloy are under wide investigation and development for advanced nuclear energy systems and waste transmutation systems. Material corrosion is one of the main issues studied a lot recently in the development of the liquid metal technology. This study reviews corrosion by liquid lead and lead bismuth, including the corrosion mechanisms, corrosion inhibitor and the formation of the protective oxide layer. The available experimental data are analyzed by using a corrosion model in which the oxidation and scale removal are coupled. Based on the model, long-term behaviors of steels in liquid lead and lead-bismuth are predictable. This report provides information for the selection of structural materials for typical nuclear reactor coolant systems when selecting liquid lead or lead bismuth as heat transfer media.

  15. NERSC seeks Computational Systems Group Lead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    seeks Computational Systems Group Lead NERSC seeks Computational Systems Group Lead January 6, 2011 by Katie Antypas Note: This position is now closed. The Computational Systems Group provides production support and advanced development for the supercomputer systems at NERSC. Manage the Computational Systems Group (CSG) which provides production support and advanced development for the supercomputer systems at NERSC (National Energy Research Scientific Computing Center). These systems, which

  16. Nick Wright Named Advanced Technologies Group Lead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nick Wright Named Advanced Technologies Group Lead Nick Wright Named Advanced Technologies Group Lead February 4, 2013 Nick Nick Wright has been named head of the National Energy Research Scientific Computing Center's (NERSC) Advanced Technologies Group (ATG), which focuses on understanding the requirements of current and emerging applications to make choices in hardware design and programming models that best serve the science needs of NERSC users. ATG specializes in benchmarking, system

  17. Zerkle to lead LANL's Information Technology organization

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Zerkle to lead Information Technology organization Zerkle to lead LANL's Information Technology organization Information Technology is responsible for departmental computing, software and software applications, and computing networks and infrastructure. March 14, 2011 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to

  18. Primer on lead-acid storage batteries

    SciTech Connect (OSTI)

    1995-09-01

    This handbook was developed to help DOE facility contractors prevent accidents caused during operation and maintenance of lead-acid storage batteries. Major types of lead-acid storage batteries are discussed as well as their operation, application, selection, maintenance, and disposal (storage, transportation, as well). Safety hazards and precautions are discussed in the section on battery maintenance. References to industry standards are included for selection, maintenance, and disposal.

  19. On-line tritium production monitor

    DOE Patents [OSTI]

    Mihalczo, J.T.

    1993-11-23

    A scintillation optical fiber system for the on-line monitoring of nuclear reactions in an event-by-event manner is described. In the measurement of tritium production one or more optical fibers are coated with enriched {sup 6}Li and connected to standard scintillation counter circuitry. A neutron generated {sup 6}Li(n)T reaction occurs in the coated surface of {sup 6}Li-coated fiber to produce energetic alpha and triton particles one of which enters the optical fiber and scintillates light through the fiber to the counting circuit. The coated optical fibers can be provided with position sensitivity by placing a mirror at the free end of the fibers or by using pulse counting circuits at both ends of the fibers. 5 figures.

  20. How to choose an online analytical system

    SciTech Connect (OSTI)

    Crandall, J.A. )

    1995-02-01

    To be competitive, hydrocarbon processing industry (HPI) operators must control their processes and product quality in real time. Using online process analytical systems, operators can collect, condition (if necessary) and analyze stream samples. Test results can be used for process control purposes and quality and environmental reports. Improving product stream data enhances control strategies. Quicker feedback on operating conditions and products yields many cost-effective benefits such as maximized uptime, improved process safety, higher product yields, reduced off-spec material, minimized waste products, etc. Before selecting an analytical method, operators should thoroughly investigate process products and operating conditions and their affects on analyzer hardware and software. Process engineers and operators, plant chemists, maintenance engineers and technicians must be involved from the beginning of the project. The paper describes designing a process analytical system, the components of such a system, and the analyzers.

  1. On-line tritium production monitor

    DOE Patents [OSTI]

    Mihalczo, John T.

    1993-01-01

    A scintillation optical fiber system for the on-line monitoring of nuclear reactions in an event-by-event manner is described. In the measurement of tritium production one or more optical fibers are coated with enriched .sup.6 Li and connected to standard scintillation counter circuitry. A neutron generated .sup.6 Li(n )T reaction occurs in the coated surface of .sup.6 Li-coated fiber to produce energetic alpha and triton particles one of which enters the optical fiber and scintillates light through the fiber to the counting circuit. The coated optical fibers can be provided with position sensitivity by placing a mirror at the free end of the fibers or by using pulse counting circuits at both ends of the fibers.

  2. Online Monitoring System for Performance Fault Detection

    SciTech Connect (OSTI)

    Gioiosa, Roberto; Kestor, Gokcen; Kerbyson, Darren J.

    2014-05-19

    To achieve the exaFLOPS performance within a contain power budget, next supercomputers will feature hundreds of millions of components operating at low- and near-threshold voltage. As the probability that at least one of these components fails during the execution of an application approaches certainty, it seems unrealistic to expect that any run of a scientific application will not experience some performance faults. We believe that there is need of a new generation of light-weight performance and debugging tools that can be used online even during production runs of parallel applications and that can identify performance anomalies during the application execution. In this work we propose the design and implementation of a monitoring system that continuously inspects the evolution of run

  3. On-line process control monitoring system

    DOE Patents [OSTI]

    O'Rourke, Patrick E.; Van Hare, David R.; Prather, William S.

    1992-01-01

    An on-line, fiber-optic based apparatus for monitoring the concentration of a chemical substance at a plurality of locations in a chemical processing system comprises a plurality of probes, each of which is at a different location in the system, a light source, optic fibers for carrying light to and from the probes, a multiplexer for switching light from the source from one probe to the next in series, a diode array spectrophotometer for producing a spectrum from the light received from the probes, and a computer programmed to analyze the spectra so produced. The probes allow the light to pass through the chemical substance so that a portion of the light is absorbed before being returned to the multiplexer. A standard and a reference cell are included for data validation and error checking.

  4. New Online Tool Creates One-Stop Shop for Federal Program Opportunitie...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Online Tool Creates One-Stop Shop for Federal Program Opportunities That Support Tribal Energy Development New Online Tool Creates One-Stop Shop for Federal Program Opportunities ...

  5. Properly engineer lead paint removal projects

    SciTech Connect (OSTI)

    Kaelin, A.B.

    1996-01-01

    Deciding how to mitigate the hazards during lead paint removal is complex and requires consideration of many variables. Assessment of public health risk, environmental impact, and emissions potential of the operations must be considered. Additionally, the removal technique, containment system, and monitoring criteria must be developed. This article presents an integrated approach to identifying lead hazards, assessing risks to workers, the environment, and the public, developing the appropriate maintenance strategy, and selecting paint removal and containment systems. Also considered are guidelines for selecting a third party to design the overall project. This approach is based on a decision path that provides criteria for project assessment in an orderly fashion. The design of lead paint management projects in industrial applications requires consideration of the variables shown in the decision path.

  6. Protocol, Qualification Standard for the Site Lead Program -...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Qualification Standard for the Site Lead Program - May 2011 Protocol, Qualification Standard for the Site Lead Program - May 2011 May 2011 Qualification Standard for the Site Lead...

  7. Sandia National Laboratories: Due Diligence on Lead Acid Battery...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Due Diligence on Lead Acid Battery Recycling March 23, 2011 Lead Acid Batteries on secondary containment pallet Lead Acid Batteries on secondary containment pallet In 2004, the US...

  8. L I NATIONAL' LEAD COMPANY OF OHIO

    Office of Legacy Management (LM)

    L I NATIONAL' LEAD COMPANY OF OHIO tJw HEALTH AND SAFETY DI"ISION - ANALITICIL DEPT. ANALYTICAL DATA SHEET _I . . NATIONAL LEAD COMPANY O F OHIO HEALTH AND SAFETY DIY1SION - ANALYTICAL DEPT. ANALYTICAL DATA SHEET NATIONA-i LEn' D COMPANY OF OHIO HEALTH AND SAFETY Dl"lSlDN - m4ALITICAL DEPT. ANALYTICAL DATA SHEET NO. I DlSTRlBUTlON OF COPIES I I A,w,lytlc.al Loboratorr (RBCORD COPI) 2 Induswlol Hvalen. B Rodhtlon Dept. 3 1 Water Trsotmmt Plant c=.z w&w hnp,., Only, - . _. NATIONAL

  9. Trends Online: A Compendium of Data on Global Change

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Data records are presented in multipage formats, each dealing with a specific site, region, or emissions species. The data records include tables; graphs; discussions of methods for collecting, measuring, and reporting the data; trends in the data, and references to literature providing further information. Instructions for citing specific data in Trends Online are provided for each compiled data set. All data appearing in Trends Online are available, on request, on digital media from CDIAC at no cost. [Copied from the Abstract to Trends Online at http://cdiac.ornl.gov/trends/abstract.htm

  10. Hazards of explosives dusts: Particle size effects

    SciTech Connect (OSTI)

    Cashdollar, K L; Hertzberg, M; Green, G M

    1992-02-01

    At the request of the Department of Energy, the Bureau of Mines has investigated the hazards of military explosives dispersed as dust clouds in a 20-L test chamber. In this report, the effect of particle size for HMX, HNS, RDX, TATB, and TNT explosives dusts is studied in detail. The explosibility data for these dusts are also compared to those for pure fuel dusts. The data show that all of the sizes of the explosives dusts that were studied were capable of sustaining explosions as dust clouds dispersed in air. The finest sizes (<10 [mu]m) of explosives dusts were less reactive than the intermediate sizes (20 to 60 [mu]m); this is opposite to the particle size effect observed previously for the pure fuel dusts. At the largest sizes studied, the explosives dusts become somewhat less reactive as dispersed dust clouds. The six sizes of the HMX dust were also studied as dust clouds dispersed in nitrogen.

  11. Worker lead exposures during renovation of homes with lead-based paint

    SciTech Connect (OSTI)

    Sussell, A.; Gittleman, J.; Singal, M.

    1998-11-01

    The authors evaluated lead exposures among full-time home renovators and part-time volunteers working primarily in pre-1960 homes with lead-based paint. Potentially hazardous lead exposures were measured during two tasks: exterior dry scraping and wet scraping. Maximum exposures were 120 and 63 {micro}g/m{sup 3}, respectively. Exposures during other tasks, including general repair, weatherization, exterior scraping/painting, window replacement, demolition, and plumbing, were low, as were all 13 full-shift personal exposures. Blood lead levels for full-time workers ranged up to 17.5 {micro}g/dl, with a GM of 5.2 {micro}g/dl; the GM for volunteers was 3.2 {micro}g/dl. All of the paint samples collected from work surfaces had detectable amounts of lead, with 65% of the work surfaces tested having an average lead concentration of >0.5%.

  12. Lead-203 as a label for radioimaging

    DOE Patents [OSTI]

    Srivastava, Suresh C.; Meinken, George E.

    1990-02-06

    A radiopharmaceutical composition comprising a radioactive isotope of lead (Pb-203) in combination with a pharmaceutical or an antibody or antibody fragment and a bifunctional chelating agent. These compositions are especially useful in the imaging and diagnosis of tumors and tumor metastases.

  13. Hanford Leads the Way for Greener Classrooms

    Broader source: Energy.gov [DOE]

    EM’s Richland Operations Office and contractor Mission Support Alliance (MSA) are leading the way to greener classrooms by developing a totally paperless class at the HAMMER Federal Training Facility at the Hanford site. MSA manages HAMMER on behalf of EM.

  14. Lead-203 as a label for radioimaging

    DOE Patents [OSTI]

    Srivastava, Suresh C.; Meinken, George E.

    1990-01-01

    A radiopharmaceutical composition comprising a radioactive isotope of lead (Pb-203) in combination with a pharmaceutical or an antibody or antibody fragment and a bifunctional chelating agent. These compositions are especially useful in the imaging and diagnosis of tumors and tumor metastases.

  15. Archaeological Lead Findings in the Ukraine

    SciTech Connect (OSTI)

    Danevich, F. A.; Kobychev, V. V.; Kropivyansky, B. N.; Mokina, V. M.; Nagorny, S. S.; Nikolaiko, A. S.; Poda, D. V.; Tretyak, V. I.; Kim, S. K.; Kim, H. J.; Kostezh, A. B.; Laubenstein, M.; Nisi, S.; Voronov, S. A.

    2007-03-28

    In June-August 2006 an expedition with the aim to look for low-radioactive archaeological lead at the bottom of the Black Sea, near the Crimean peninsula (Ukraine) was organised by a Korean-Ukrainian collaboration. The first samples with {approx}0.2 tons of total mass were found at a depth of 28 m among the relics of an ancient Greek ship. Their age has been dated to the first century B.C. This lead was used as ballast in the keel of the ship. The element composition of the samples was measured by means of X-ray fluorescence and ICP-MS analyses. The first preliminary limits on the 210Pb contamination of the samples are less than a few hundreds mBq/kg. The measurements were performed using gamma spectroscopy with HPGe-detectors and alpha spectroscopy with commercial {alpha}-detectors. Measurements of 40K, Th/U in the lead samples were undertaken in Kiev and in the underground laboratories of the Laboratori Nazionali del Gran Sasso (LNGS, Italy). If it was found to be radio-clean this lead could be used as high efficiency shield for ultra low-level detectors, and as raw material for growing radio-pure scintillation crystals such as PbMoO4 or PbWO4 for the search for rare processes.

  16. THE STICKINESS OF MICROMETER-SIZED WATER-ICE PARTICLES

    SciTech Connect (OSTI)

    Gundlach, B.; Blum, J.

    2015-01-01

    Water ice is one of the most abundant materials in dense molecular clouds and in the outer reaches of protoplanetary disks. In contrast to other materials (e.g., silicates), water ice is assumed to be stickier due to its higher specific surface energy, leading to faster or more efficient growth in mutual collisions. However, experiments investigating the stickiness of water ice have been scarce, particularly in the astrophysically relevant micrometer-sized region and at low temperatures. In this work, we present an experimental setup to grow aggregates composed of ?m-sized water-ice particles, which we used to measure the sticking and erosion thresholds of the ice particles at different temperatures between 114 K and 260 K. We show with our experiments that for low temperatures (below ?210 K), ?m-sized water-ice particles stick below a threshold velocity of 9.6 m s{sup 1}, which is approximately 10times higher than the sticking threshold of ?m-sized silica particles. Furthermore, erosion of the grown ice aggregates is observed for velocities above 15.3 m s{sup 1}. A comparison of the experimentally derived sticking threshold with model predictions is performed to determine important material properties of water ice, i.e., the specific surface energy and the viscous relaxation time. Our experimental results indicate that the presence of water ice in the outer reaches of protoplanetary disks can enhance the growth of planetesimals by direct sticking of particles.

  17. On-line subsea multiphase flow measurement

    SciTech Connect (OSTI)

    High, G.; Frantzen, K.H.; Marshall, M.

    1995-12-31

    This paper describes the final detailed design, engineering, and installation phase of a Joint Industry Program to qualify a robust subsea multiphase flowmeter module for long-term installation on a North Sea manifold tie-in. Multiphase subsea production has become a common method of hydrocarbon recovery in all areas of offshore E and P. In the North Sea, many developments are subsea satellites with multiphase well-fluids being comingled prior to processing. The system described meets this challenge by offering a cost effective solution to real-time well monitoring as an alternative to the conventional test separator, removing the need for test lines and shutting in wells for testing. The multiphase instrument allows on-line well fluid analysis, and is also an important tool for reservoir management and field analysis, and provides a means of implementing field allocation metering thereby simplifying small marginal field developments. This project is one of the first subsea multiphase flowmeter installations engineered for long-term subsea service, and designed as an integrated component of the subsea production control system.

  18. New Online Tools Showcase Efficient Technologies and Deployment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Visit FEMP's new technology deployment search tool and map to learn more Addthis Related Articles Free, online training courses on

  19. Hendrix College student named Goldwater Scholar (Arkansas, Online) |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jefferson Lab Hendrix College student named Goldwater Scholar (Arkansas, Online) External Link: http://www.arkansasonline.com/news/2012/apr/08/hendrix-college-student-named-gol... By jlab_admin on Sun, 2012-04-08

  20. RRC - Online Drilling Permit System Login webpage | Open Energy...

    Open Energy Info (EERE)

    System Login webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: RRC - Online Drilling Permit System Login webpage Abstract This is the login...

  1. Northeast Home Heating Oil Reserve- Online Bidding System

    Office of Energy Efficiency and Renewable Energy (EERE)

    The U.S. Department of Energy has developed an on-line bidding system - an anonymous auction program - for the sale of product from the one million barrel Northeast Home Heating Oil Reserve.

  2. NOVA NERSC's Online VASP Application Annette Greiner Shreyas Cholia

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NOVA NERSC's Online VASP Application Annette Greiner Shreyas Cholia 0 10 20 30 40 50 60 70 80 90 VASP Gaussian Quantum Espresso NWChem LAMMPS NAMD NIMROD WRF CPMD Codes Used by the Most Projects at NERSC Number of Projects as of Sep 2010 Why VASP? Why run VASP in a browser? Making interacting with HPC more efficient * Error checking * Organizing and retrieving jobs * Real-time job monitoring * Integrated analysis tools * Integration with other online tools * Meaningful UI controls VASP with a

  3. FACTSHEET: Energy Department Launches Open-Source Online Training Resource

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to Help Students, Workers Gain Valuable Skills | Department of Energy FACTSHEET: Energy Department Launches Open-Source Online Training Resource to Help Students, Workers Gain Valuable Skills FACTSHEET: Energy Department Launches Open-Source Online Training Resource to Help Students, Workers Gain Valuable Skills June 21, 2012 - 7:47am Addthis The Energy Department and SRI International today officially launched the National Training and Education Resource (NTER), an open-source platform for

  4. Implementation Guidance for the DOE Policy on Documentation and Online

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Posting of Categorical Exclusion Determinations (DOE, 2010) | Department of Energy Implementation Guidance for the DOE Policy on Documentation and Online Posting of Categorical Exclusion Determinations (DOE, 2010) Implementation Guidance for the DOE Policy on Documentation and Online Posting of Categorical Exclusion Determinations (DOE, 2010) To further transparency and openness in its implementation of the National Environmental Policy Act (NEPA), the Department of Energy (DOE) has

  5. Distributed PV Interconnection Screening Procedures and Online Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Distributed PV Interconnection Screening Procedures and Online Tools" Joel Dickinson with Salt River Project Solar Initiatives Group August 27, 2014 2 Speakers Joel Dickinson Sr. Engineer Salt River Project Kristen Ardani Solar Analyst National Renewable Energy Laboratory (DGIC moderator) August 27th, 2014 Joel Dickinson, P.E. Sr. Engineer Solar Initiatives Distributed PV Interconnection Screening and Online Tools Salt River Project  Established in 1903 after Theodore Roosevelt signed

  6. Online Toolkit Fosters Bioenergy Innovation | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Toolkit Fosters Bioenergy Innovation Online Toolkit Fosters Bioenergy Innovation January 21, 2011 - 2:27pm Addthis Learn more about the Bioenergy Knowledge Discovery Framework, an online data sharing and mapping toolkit. Paul Bryan Biomass Program Manager, Office of Energy Efficiency & Renewable Energy What will the project do? The $241 million loan guarantee for Diamond Green Diesel, funding which will support the construction of a facility that will nearly triple the amount of renewable

  7. A reactor core on-line monitoring program - COMP

    SciTech Connect (OSTI)

    Wang, C.; Wu, H.; Cao, L.

    2012-07-01

    A program named COMP is developed for on-line monitoring PWRs' in-core power distribution in this paper. Harmonics expansion method is used in COMP. The Unit 1 reactor of Daya Bay Nuclear Power Plant (Daya Bay NPP) in China is considered for verification. The numerical results show that the maximum relative error between measurement and reconstruction results from COMP is less than 5%, and the computing time is short, indicating that COMP is capable for online monitoring PWRs. (authors)

  8. Lead magnesium niobate actuator for micropositioning

    DOE Patents [OSTI]

    Swift, C.D.; Bergum, J.W.

    1994-10-25

    An improved lead magnesium niobate actuator is disclosed comprising a cylindrical lead magnesium niobate crystal stack mounted in a cylindrical casing wherein a bias means, such as one or more belleville washers, is located between one end of the crystal stack and a partially closed end of the casing; and adjustment means are provided which bear against the opposite end of the crystal stack, whereby an adjustable compressive force is constantly applied against the crystal stack, whether the crystal stack is actuated in an extended position, or is in an unactuated contracted position. In a preferred embodiment, cooling ports are provided for the circulation of coolant in the actuator to cool the crystal stack, and provision is made for removal and replacement of the crystal stack without disconnecting the actuator from the external device being actuated. 3 figs.

  9. Lead magnesium niobate actuator for micropositioning

    SciTech Connect (OSTI)

    Swift, Charles D.; Bergum, John W.

    1994-01-01

    An improved lead magnesium niobate actuator is disclosed comprising a cylindrical lead magnesium niobate crystal stack mounted in a cylindrical casing wherein a bias means, such as one or more belleville washers, is located between one end of the crystal stack and a partially closed end of the casing; and adjustment means are provided which bear against the opposite end of the crystal stack, whereby an adjustable compressive force is constantly applied against the crystal stack, whether the crystal stack is actuated in an extended position, or is in an unactuated contracted position. In a preferred embodiment, cooling ports are provided for the circulation of coolant in the actuator to cool the crystal stack, and provision is made for removal and replacement of the crystal stack without disconnecting the actuator from the external device being actuated.

  10. Fermilab | Science | Particle Accelerators | Leading Accelerator Technology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Leading Accelerator Technology photo From blueprint to construction, Fermilab scientists and engineers develop particle accelerators to produce beams to take particle physics to the next level, collaborating with scientists and laboratories around the world to help build these complex machines. Researchers build accelerators to be efficient and robust along every step of the particle beam's path, from the time it's born to its termination on target. The machines themselves must be efficient,

  11. Leading By Example | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    By Example Leading By Example November 3, 2011 - 3:08pm Addthis New cool roofs installed on the Energy Department’s headquarters building in Washington DC in November, 2010. | Image credit Quentin Kruger, Energy Department New cool roofs installed on the Energy Department's headquarters building in Washington DC in November, 2010. | Image credit Quentin Kruger, Energy Department Brian Costlow Director, Office of Administration Brian Costlow has won several awards for his work recently,

  12. Leading manufacturers in the Better Buildings

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Leading manufacturers in the Better Buildings, Better Plants Program are taking on bold commitments to improve energy efficiency across their operations. Building on President Obama's Better Buildings Initiative and the Administration's broader efforts to double energy productivity by 2030, the U.S. Department of Energy (DOE) works with manufacturers to set corporate-wide energy reduction goals, improve energy management, and track and report their progress. The industrial sector accounts for

  13. An evaluation of worker lead exposures and cleaning effectiveness during removal of deteriorated lead-based paint

    SciTech Connect (OSTI)

    Sussell, A.; Wild, D.; Ashley, K.; Hart, C.

    1999-03-01

    The authors evaluated worker lead exposures and cleaning effectiveness during initial cleanup of 19th-century buildings with highly deteriorated lead-based paint. Eighteen rooms of similar size and condition in two university-owned buildings were selected for a pilot project to compare three methods for removing loose paint, paint chips, and dust. The methods used were: dry scraping followed by dry sweeping (no engineering or work practice controls); wet scraping and high-efficiency particulate air (HEPA) vacuuming; and the latter method with the addition of a portable HEPA-filtered exhaust fan in the room providing about 40 air changes per hour. The final step for all methods was wet-mopping once with tri-sodium phosphate solution. During a single day 18 rooms were cleaned; each of three two-person work crews cleaned six room, two with each method. Air and surface samples were collected before, during, and after cleaning. All of the methods were potentially hazardous to workers: 44% of the method-based exposures and one of five full-shift exposures exceeded the OSHA PEL.

  14. Particle size distribution instrument. Topical report 13

    SciTech Connect (OSTI)

    Okhuysen, W.; Gassaway, J.D.

    1995-04-01

    The development of an instrument to measure the concentration of particles in gas is described in this report. An in situ instrument was designed and constructed which sizes individual particles and counts the number of occurrences for several size classes. Although this instrument was designed to detect the size distribution of slag and seed particles generated at an experimental coal-fired magnetohydrodynamic power facility, it can be used as a nonintrusive diagnostic tool for other hostile industrial processes involving the formation and growth of particulates. Two of the techniques developed are extensions of the widely used crossed beam velocimeter, providing simultaneous measurement of the size distribution and velocity of articles.

  15. Investigation of thermochemical biorefinery sizing and environmental...

    Office of Scientific and Technical Information (OSTI)

    Investigation of thermochemical biorefinery sizing and environmental sustainability impacts for conventional supply system and distributed pre-processing supply system designs...

  16. Asset Recovery of Hazardous Materials Beneficial Reuse of Radiologically Encumbered Lead Stocks ''Getting the Lead Out''

    SciTech Connect (OSTI)

    LLOYD, E.R.

    2003-01-23

    Underutilized and surplus lead stocks and leaded components are a common legacy environmental problem across much of the Department of Energy (DOE) Complex. While seeking to dispose of these items through its Environmental Management Program, DOE operational programs continue to pursue contemporary mission requirements such as managing and/or storing radioactive isotopes that require lead materials for shielding. This paradox was identified in late 1999 when DOES policies for managing scrap metal were assessed. In January 2000, the Secretary of Energy directed the National Center of Excellence for Materials Recycle (NMR) to develop and implement a comprehensive lead reuse program for all of DOE. Fluor Hanford, contractor for DOE Richland Operations, subsequently contacted NMR to pilot lead reclamation and reuse at the Hanford Site, This relationship resulted in the development of a beneficial reuse pathway for lead reclaimed from spent fuel transport railcars being stored at Hanford. The 1.3 million pounds of lead in the railcars is considered radiologically encumbered due to its prior use. Further, the material was considered a mixed Resource Conservation and Recovery Act (RCRA) low-level radioactive waste that would require expensive storage or macro encapsulation to meet land disposal restrictions prior to burial. Working closely with Flour Hanford and the Office of Air, Water, and Radiation (EH-412), NMR developed a directed reuse pathway for this and other radiologically encumbered lead When derived supplemental release limits were used, the lead recovered from these railcars became eligible for reuse in shielding products to support DOE and commercial nuclear industry operations. Using this disposition pathway has saved Hanford one third of the cost of disposing of the lead and the cost of acquiring additional lead for nuclear shielding applications. Furthermore, the environmental costs associated with mining and producing new lead for shielding products and

  17. Finite Size Corrections to the Radiation Reaction Force in Classical Electrodynamics

    SciTech Connect (OSTI)

    Galley, Chad R.; Leibovich, Adam K.; Rothstein, Ira Z.

    2010-08-27

    We introduce an effective field theory approach that describes the motion of finite size objects under the influence of electromagnetic fields. We prove that leading order effects due to the finite radius R of a spherically symmetric charge is order R{sup 2} rather than order R in any physical model, as widely claimed in the literature. This scaling arises as a consequence of Poincare and gauge symmetries, which can be shown to exclude linear corrections. We use the formalism to calculate the leading order finite size correction to the Abraham-Lorentz-Dirac force.

  18. Thermal spray vitrification process for the removal of lead oxide contained in organic paints

    SciTech Connect (OSTI)

    Karthikeyan, J.; Chen, J.; Bancke, G.A.; Herman, H.; Berndt, C.C.; Breslin, V.T.

    1995-12-31

    The US Environmental Protection Agency (US-EPA) regulations have necessitated the removal and containment of toxic lead from lead oxide containing paints. The Thermal Spray Vitrification Process (TSVP) is a novel technique in which a glass powder of appropriate composition is flame sprayed onto the painted surface to achieve removal and vitrification of the lead. Two different glass systems, i.e., alkali silicate and ferrous silicate, were chosen for detailed study. Appropriate amounts of raw materials were mixed, fused, quenched, ground and sieved to obtain the spray quality powders. Grit blasted mild steel coupons were used as test substrates for the spray parameter optimization studies; while those coupons with lead oxide containing organic paint were used for the lead removal experiments. The powders and deposits were investigated using Microtrac particle size analysis (for powders), optical microscopy, XRD and SEM. The remnant lead in the panel was measured using a specially prepared X-Ray Fluorescence (XRF) system. The lead leach rate was recorded as per US-EPA approved Toxicity Characteristic Leaching Procedure (TCLP). The results of this study have shown that lead oxide can be successfully removed form the paint by flame spraying a maximum of three layers of glass onto the painted surface. It is possible to obtain much higher lead removal rate with ferrous silicate glass as compared to alkali silicate glass is much higher than the ferrous silicate glass. The in situ vitrification has not been completely optimized; however, the lead containing glass coating can be remelted in situ or on site to enhance the vitrification of the lead which had been absorbed in the glass coating.

  19. BNL Building 650 lead decontamination and treatment feasibility study. Final report

    SciTech Connect (OSTI)

    Kalb, P.D.; Cowgill, M.G.; Milian, L.W.

    1995-10-01

    Lead has been used extensively at Brookhaven National Laboratory (BNL) for radiation shielding in numerous reactor, accelerator and other research programs. A large inventory of excess lead (estimated at 410,000 kg) in many shapes and sizes is currently being stored. Due to it`s toxicity, lead and soluble lead compounds are considered hazardous waste by the Environmental Protection Agency. Through use at BNL, some of the lead has become radioactive, either by contamination of the surface or through activation by neutrons or deuterons. This study was conducted at BNL`s Environmental and Waste Technology Center for the BNL Safety and Environmental Protection Division to evaluate feasibility of various treatment options for excess lead currently being stored. The objectives of this effort included investigating potential treatment methods by conducting a review of the literature, developing a means of screening lead waste to determine the radioactive characteristics, examining the feasibility of chemical and physical decontamination technologies, and demonstrating BNL polyethylene macro-encapsulation as a means of treating hazardous or mixed waste lead for disposal. A review and evaluation of the literature indicated that a number of physical and chemical methods are available for decontamination of lead. Many of these techniques have been applied for this purpose with varying degrees of success. Methods that apply mechanical techniques are more appropriate for lead bricks and sheet which contain large smooth surfaces amenable to physical abrasion. Lead wool, turnings, and small irregularly shaped pieces would be treated more effectively by chemical decontamination techniques. Either dry abrasion or wet chemical methods result in production of a secondary mixed waste stream that requires treatment prior to disposal.

  20. Understanding sensitization behavior of lead selenide photoconductive detectors by charge separation model

    SciTech Connect (OSTI)

    Zhao, Lihua E-mail: shi@ou.edu; Qiu, Jijun; Weng, Binbin; Chang, Caleb; Yuan, Zijian; Shi, Zhisheng E-mail: shi@ou.edu

    2014-02-28

    We introduce a charge separation model in this work to explain the mechanism of enhanced photoconductivity of polycrystalline lead salt photoconductors. Our results show that this model could clarify the heuristic fabrication processes of such lead salt detectors that were not well understood and often considered mysterious for nearly a century. The improved lifetime and performance of the device, e.g., responsivity, are attributed to the spatial separation of holes and electrons, hence less possibility of carrier recombination. This model shows that in addition to crystal quality the size of crystallites, the depth of outer conversion layer, and doping concentration could all affect detector performance. The simulation results agree well with experimental results and thus offer a very useful tool for further improvement of lead salt detectors. The model was developed with lead salt family of photoconductors in mind, but may well be applicable to a wider class of semiconducting films.

  1. Lead Slowing Down Spectrometer Status Report

    SciTech Connect (OSTI)

    Warren, Glen A.; Anderson, Kevin K.; Bonebrake, Eric; Casella, Andrew M.; Danon, Yaron; Devlin, M.; Gavron, Victor A.; Haight, R. C.; Imel, G. R.; Kulisek, Jonathan A.; O'Donnell, J. M.; Weltz, Adam

    2012-06-07

    This report documents the progress that has been completed in the first half of FY2012 in the MPACT-funded Lead Slowing Down Spectrometer project. Significant progress has been made on the algorithm development. We have an improve understanding of the experimental responses in LSDS for fuel-related material. The calibration of the ultra-depleted uranium foils was completed, but the results are inconsistent from measurement to measurement. Future work includes developing a conceptual model of an LSDS system to assay plutonium in used fuel, improving agreement between simulations and measurement, design of a thorium fission chamber, and evaluation of additional detector techniques.

  2. Novel lead-iron phosphate glass

    DOE Patents [OSTI]

    Boatner, Lynn A.; Sales, Brian C.

    1989-01-01

    The invention described and claimed in the specification relates to the discovery that effective addition of Fe.sub.2 O.sub.3 to a lead phosphate glass results in a glass having enhanced chemical durability and physical stability, and consists essentially of the glass resulting from melting a mixture consisting essentially of, in weight percent, 40-66 percent PbO, 30-55 percent P.sub.2 O.sub.5 and an effective concentration up to 12 percent Fe.sub.2 O.sub.3.

  3. Novel lead-iron phosphate glass

    DOE Patents [OSTI]

    Boatner, L.A.; Sales, B.C.

    1989-07-11

    The invention described and claimed in the specification relates to the discovery that effective addition of Fe[sub 2]O[sub 3] to a lead phosphate glass results in a glass having enhanced chemical durability and physical stability, and consists essentially of the glass resulting from melting a mixture consisting essentially of, in weight percent, 40--66 percent PbO, 30--55 percent P[sub 2]O[sub 5] and an effective concentration up to 12 percent Fe[sub 2]O[sub 3].

  4. Non-lead hollow point bullet

    DOE Patents [OSTI]

    Vaughn, Norman L.; Lowden, Richard A.

    2003-04-15

    The non-lead hollow point bullet of the instant invention comprises a mixed construction slug further comprising, a monolithic metal insert having a tapered (preferred conical) hollow point tip and a tapered (preferred conical) tail protrusion, and an unsintered powdered metal composite core in tandem alignment with the insert. The core has a hollow tapered (preferred conical) cavity tip portion coupled with the tapered (preferred conical) tail protrusion on the insert. An open tip jacket envelops at least a portion of the insert and the core. The jacket is swaged at the open tip.

  5. (Lead-lithium corrosion and chemistry)

    SciTech Connect (OSTI)

    Tortorelli, P.F.

    1990-09-21

    The traveler participated in the 1990 European Workshop on Lead-Lithium Corrosion and Chemistry. Main areas of emphasis in the European liquid metal (exclusively Pb-17 at. % Li) program are now on deposition effects and corrosion-resistant surface product layers that can also serve as barriers to tritium permeation and insulators. Dr. Tortorelli also visited Harwell Laboratory to discuss innovative methods of corrosion analysis. He attended the 16th Symposium on Fusion Technology in London and the initial meeting of the Program Committee for the Second International Symposium on Fusion Nuclear Technology, which will be held in June 1991. He toured the JET facilities as part of the SOFT program.

  6. Pyroelectric response of ferroelectric nanowires: Size effect and electric energy harvesting

    SciTech Connect (OSTI)

    Morozovska, A. N.; Eliseev, E. A.; Svechnikov, S. V.; Kalinin, Sergei V

    2010-01-01

    The size effect on pyroelectric response of ferroelectric nanowires is analyzed. The pyroelectric coefficient strongly increases with the wire radius decrease and diverges at critical radius Rcr corresponding to the size-driven transition into paraelectric phase. Size-driven enhancement of pyroelectric coupling leads to the giant pyroelectric current and voltage generation by the polarized ferroelectric nanoparticles in response to the temperature fluctuation. The maximum efficiency of the pyroelectric energy harvesting and bolometric detection is derived, and is shown to approach the Carnot limit for low temperatures.

  7. Online SAG Mill Pluse Measurement and Optimization

    SciTech Connect (OSTI)

    Raj Rajamani; Jose Delgadillo; Vishal Duriseti

    2007-06-30

    The grinding efficiency of semi autogenous milling or ball milling depends on the tumbling motion of the total charge within the mill. Utilization of this tumbling motion for efficient breakage of particles depends on the conditions inside the mill. However, any kind of monitoring device to measure the conditions inside the mill shell during operation is virtually impossible due to the severe environment presented by the tumbling charge. An instrumented grinding ball, which is capable of surviving a few hours and transmitting the impacts it experiences, is proposed here. The spectrum of impacts collected over 100 revolutions of the mills presents the signature of the grinding environment inside mill. This signature could be effectively used to optimize the milling performance by investigating this signature's relation to mill product size, mill throughput, make-up ball size, mill speed, liner profile and ball addition rates. At the same time, it can also be used to design balls and liner systems that can survive longer in the mill. The technological advances made in electronics and communication makes this leap in instrumentation certainly viable. Hence, the instrumented grinding ball offers the ability to qualitatively observe and optimize the milling environment. An instrumented load cell package that can measure the force of impacts inside the grinding chamber of a mill is developed here. The signal from the instrumented load cell package is interpreted in terms of a histogram termed as an impact spectrum which is a plot of the number of impacts at a specific energy level against the energy. It reflects on the average force regime of the mill. The instrumented load cell package was calibrated against the ultra fast load cell which has been unanimously accepted as a standard to measure single breakage events. The load cell package was successfully used to produce impact spectra in an 8.5 inch lab scale mill. The mill speed and the ball size were varied to study

  8. Online Monitoring to Enable Improved Diagnostics, Prognostics and Maintenance

    SciTech Connect (OSTI)

    Bond, Leonard J.

    2011-02-01

    For both existing and new plant designs there are increasing opportunities and needs for the application of advanced online surveillance, diagnostic and prognostic techniques. These methods can continuously monitor and assess the health of nuclear power plant systems and components. The added effectiveness of such programs has the potential to enable holistic plant management, and minimize exposure to future and unknown risks. The 'NDE & On-line Monitoring' activities within the Advanced Instrumentation, Information and Control Systems (II&CS) Pathway are developing R&D to establish advanced condition monitoring and prognostics technologies to understand and predict future phenomena, derived from plant aging in systems, structures, and components (SSC). This research includes utilization of the enhanced functionality and system condition awareness that becomes available through the application of digital technologies at existing nuclear power plants for online monitoring and prognostics. The current state-of-the-art for on-line monitoring applied to active components (eg pumps, valves, motors) and passive structure (eg core internals, primary piping, pressure vessel, concrete, cables, buried pipes) is being reviewed. This includes looking at the current deployment of systems that monitor reactor noise, acoustic signals and vibration in various forms, leak monitoring, and now increasingly condition-based maintenance (CBM) for active components. The NDE and on-line monitoring projects are designed to look beyond locally monitored CBM. Current trends include centralized plant monitoring of SSC, potential fleet-based CBM and technology that will enable operation and maintenance to be performed with limited on-site staff. Attention is also moving to systems that use online monitoring to permit longer term operation (LTO), including a prognostic or predictive element that estimates a remaining useful life (RUL). Many, if not all, active components (pumps, valves, motors

  9. Lightning arrestor connector lead magnesium niobate qualification pellet test procedures.

    SciTech Connect (OSTI)

    Tuohig, W.; Mahoney, Patrick A.; Tuttle, Bruce Andrew; Wheeler, Jill Susanne

    2009-02-01

    Enhanced knowledge preservation for DOE DP technical component activities has recently received much attention. As part of this recent knowledge preservation effort, improved documentation of the sample preparation and electrical testing procedures for lead magnesium niobate--lead titanate (PMN/PT) qualification pellets was completed. The qualification pellets are fabricated from the same parent powders used to produce PMN/PT lightning arrestor connector (LAC) granules at HWF&T. In our report, the procedures for fired pellet surface preparation, electrode deposition, electrical testing and data recording are described. The dielectric measurements described in our report are an information only test. Technical reasons for selecting the electrode material, electrode size and geometry are presented. The electrical testing is based on measuring the dielectric constant and dissipation factor of the pellet during cooling from 280 C to 220 C. The most important data are the temperature for which the peak dielectric constant occurs (Curie Point temperature) and the peak dielectric constant magnitude. We determined that the peak dielectric constant for our procedure would be that measured at 1 kHz at the Curie Point. Both the peak dielectric constant and the Curie point parameters provide semi-quantitative information concerning the chemical and microstructural homogeneity of the parent material used for the production of PMN/PT granules for LACs. Finally, we have proposed flag limits for the dielectric data for the pellets. Specifically, if the temperature of the peak dielectric constant falls outside the range of 250 C {+-} 30 C we propose that a flag limit be imposed that will initiate communication between production agency and design agency personnel. If the peak dielectric constant measured falls outside the range 25,000 {+-} 10,000 we also propose that a flag limit be imposed.

  10. Closure device for lead-acid batteries

    DOE Patents [OSTI]

    Ledjeff, Konstantin

    1983-01-01

    A closure device for lead-acid batteries includes a filter of granulated activated carbon treated to be hydrophobic combined with means for preventing explosion of emitted hydrogen and oxygen gas. The explosion prevention means includes a vertical open-end tube within the closure housing for maintaining a liquid level above side wall openings in an adjacent closed end tube. Gases vent from the battery through a nozzle directed inside the closed end tube against an impingement surface to remove acid droplets. The gases then flow through the side wall openings and the liquid level to quench any possible ignition prior to entering the activated carbon filter. A wick in the activated carbon filter conducts condensed liquid back to the closure housing to replenish the liquid level limited by the open-end tube.

  11. Lead paint abatement -- A technological review

    SciTech Connect (OSTI)

    Draper, A.C. III; Kapuscik, D.

    1994-12-31

    Abatement of lead from various surfaces proves to be a rapidly developing industry. Removal techniques and effectiveness varies greatly with varying substrates (wood, concrete, steel, etc.) and surface configurations including interior/exterior considerations, habitability and anticipated retrofit. Numerous technologies advances, and/or adaptations of long accepted removal techniques have recently emerged. Some of the more commonly used removal procedures including vacuum blasting, chemical stripping, scarifiers, grinders, sanders, etc. will be reviewed. Specific emphasis will be placed upon mode of application, positive and negative environmental aspects, and varying emissions generated. Personnel sampling data will be discussed with respect to associated personal protective equipment impact to derive the most cost productive environmentally conscious alternatives.

  12. Jay Srinivasan! Group Lead, Computational Systems!

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Group Lead, Computational Systems! NUG - Feb 2015 Computational Systems Update NERSC - 2014 --- 2 --- Sponsored C ompute S ystems Carver, P DSF, J GI, K BASE, H EP 8 x F DR I B /global/ scratch 4 PB /project 5 PB /home 250 TB 45 P B s tored, 2 40 P B capacity, 4 0 y ears o f community d ata HPSS 48 GB/s 2.2 P B L ocal Scratch 70 GB/s 6.4 P B L ocal Scratch 140 GB/s 80 GB/s 2 x 10 Gb 1 x 100 Gb Science D ata N etwork Vis & A naly?cs, D ata T ransfer N odes, Adv. A rch., S cience G ateways 80

  13. Lead Slowing Down Spectrometer Research Plans

    SciTech Connect (OSTI)

    Warren, Glen A.; Kulisek, Jonathan A.; Gavron, Victor; Danon, Yaron; Weltz, Adam; Harris, Jason; Stewart, T.

    2013-03-22

    The MPACT-funded Lead Slowing Down Spectrometry (LSDS) project has been evaluating the feasibility of using LSDS techniques to assay fissile isotopes in used nuclear fuel assemblies. The approach has the potential to provide considerable improvement in the assay of fissile isotopic masses in fuel assemblies compared to other non-destructive techniques in a direct and independent manner. The LSDS collaborations suggests that the next step to in empirically testing the feasibility is to conduct measurements on fresh fuel assemblies to understand investigate self-attenuation and fresh mixed-oxide (MOX) fuel rodlets so we may betterto understand extraction of masses for 235U and 239Pu. While progressing toward these goals, the collaboration also strongly suggests the continued development of enabling technology such as detector development and algorithm development, thatwhich could provide significant performance benefits.

  14. LOFT lead rod test results evaluation. [PWR

    SciTech Connect (OSTI)

    Driskell, W.B.; Tolman, E.L.

    1980-07-30

    The purpose for evaluating the LOFT Lead Rod Test (simulations of large break, loss-of-coolant accidents) data was to determine; (a) if the centerline thermocouple and fuel rod elongation sensor data show indications of the collapsed fuel rod cladding, (b) the capability of the FRAP-T5 computer code to accurately predict cladding collapse, and (c) if cladding surface thermocouples enhance fuel rod cooling. With consideration to unresolved questions on data integrity, it was concluded that: the fuel rod centerline thermocouple and elongation sensor data do show indications of the fuel rod cladding collapse; the FRAP-T5 code conservatively predicts cladding collapse; and there is an indication that cladding surface thermocouples are enhancing fuel rod cooling.

  15. Sandia National Laboratories: Due Diligence on Lead Acid Battery Recycling

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Due Diligence on Lead Acid Battery Recycling March 23, 2011 Lead Acid Batteries on secondary containment pallet Lead Acid Batteries on secondary containment pallet In 2004, the US Geological Survey estimated that 95% of lead in the United States is recycled, primarily from used lead acid batteries. A broader 2009 European study estimated that globally about 52% of lead is recycled, and a 2008 Asian study estimated a global recycle rate of 68%. Unfortunately, many incidents over the past decade

  16. Alternative Fuels Data Center: San Diego Leads in Promoting EVs

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    San Diego Leads in Promoting EVs to someone by E-mail Share Alternative Fuels Data Center: San Diego Leads in Promoting EVs on Facebook Tweet about Alternative Fuels Data Center: San Diego Leads in Promoting EVs on Twitter Bookmark Alternative Fuels Data Center: San Diego Leads in Promoting EVs on Google Bookmark Alternative Fuels Data Center: San Diego Leads in Promoting EVs on Delicious Rank Alternative Fuels Data Center: San Diego Leads in Promoting EVs on Digg Find More places to share

  17. Energy Efficiency Lead-by-Example Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lead-by-Example Resources Energy Efficiency Lead-by-Example Resources State and local governments can lead by example by promoting energy efficiency programs and policies for public facilities, equipment, and government operations. Find energy efficiency lead-by-example resources below. DOE Resource Federal Energy Management Program Publications. Other Resources Environmental Protection Agency: Lead by Example in Government Operations ACEEE's Lead By Example Initiatives National Governors

  18. ARM - Measurement - Cloud particle size distribution

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    from you Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Cloud particle size distribution The number of cloud particles present in any given volume of air...

  19. Fuel Cell Expert Dr. Sanjiv Malhotra to Lead Energy Department...

    Energy Savers [EERE]

    Expert Dr. Sanjiv Malhotra to Lead Energy Department's Clean Energy Investment Center Fuel Cell Expert Dr. Sanjiv Malhotra to Lead Energy Department's Clean Energy Investment ...

  20. Advanced Lead Acid Battery Consortium | Open Energy Information

    Open Energy Info (EERE)

    Lead Acid Battery Consortium Jump to: navigation, search Name: Advanced Lead-Acid Battery Consortium Place: Durham, North Carolina Zip: 27713 Sector: Vehicles Product: The ALABC is...

  1. Lead Hexacyanoferrate(II) Tetrahydrate: Crystal Structure, FTIR...

    Office of Scientific and Technical Information (OSTI)

    Lead Hexacyanoferrate(II) Tetrahydrate: Crystal Structure, FTIR Spectroscopy and Thermal Decomposition Studies Citation Details In-Document Search Title: Lead Hexacyanoferrate(II) ...

  2. New Superconducting Magnet Will Lead to Next Generation of Wind...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Superconducting Magnet Will Lead to Next Generation of Wind Turbine Generators New Superconducting Magnet Will Lead to Next Generation of Wind Turbine Generators September 12, 2014 ...

  3. SEEWEC Consortium lead partner Ghent University | Open Energy...

    Open Energy Info (EERE)

    SEEWEC Consortium lead partner Ghent University Jump to: navigation, search Name: SEEWEC Consortium lead partner Ghent University Address: Sint Pietersnieuwstraat 41 Place: Gent...

  4. Low Emission Asian Development (LEAD) Program | Open Energy Informatio...

    Open Energy Info (EERE)

    Low Emission Asian Development (LEAD) Program Redirect page Jump to: navigation, search REDIRECT Low Emissions Asian Development (LEAD) Program Retrieved from "http:...

  5. Volunteers Leading Technology, A Case Study: Chewonki Renewable...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Volunteers Leading Technology, A Case Study: Chewonki Renewable Hydrogen Project Volunteers Leading Technology, A Case Study: Chewonki Renewable Hydrogen Project This presentation ...

  6. Fractionated Radiation Exposure of Rat Spinal Cords Leads to...

    Office of Scientific and Technical Information (OSTI)

    Fractionated Radiation Exposure of Rat Spinal Cords Leads to Latent Neuro-Inflammation in ... of Rat Spinal Cords Leads to Latent Neuro-Inflammation in Brain, Cognitive Deficits, ...

  7. Solar Decathlon 2015: Nation's Leading Sustainable Home Design...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solar Decathlon 2015: Nation's Leading Sustainable Home Design Competition on the Horizon Solar Decathlon 2015: Nation's Leading Sustainable Home Design Competition on the Horizon...

  8. Bush Administration Plays Leading Role in Studying and Addressing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Bush Administration Plays Leading Role in Studying and Addressing Global Climate Change Bush Administration Plays Leading Role in Studying and Addressing Global Climate Change...

  9. Sizing of DNA fragments by flow cytometry

    SciTech Connect (OSTI)

    Johnson, M.E.; Goodwin, P.M.; Ambrose, W.P.; Martin, J.C.; Marrone, B.L.; Jett, J.H.; Keller, R.A.

    1993-02-01

    Individual, stained DNA fragments were sized using a modified flow cytometer with high sensitivity fluorescence detection. The fluorescent intercalating dye ethidium homodimer was used to stain stoichiometrically lambda phage DNA and a Kpn I digest of lambda DNA. Stained, individual fragments of DNA were passed through a low average power, focused, mode-locked laser beam, and the fluorescence from each fragment was collected and quantified. Time-gated detection was used to discriminate against Raman scattering from the water solvent. The fluorescence burst from each fragment was related directly to its length, thus providing a means to size small quantities of kilobase lengths of DNA quickly. Improvements of several orders of magnitude in analysis time and sample size over current gel electrophoresis techniques were realized. Fragments of 17.1,29.9, and 48.5 thousand base pairs were well resolved, and were sized in 164 seconds. Less than one pg of DNA was required for analysis. We have demonstrated sizing of individual, stained DNA fragments with resolution approaching that of gel electrophoresis for moderately large fragments, but with significant reductions in the analysis time and the amount of sample required. Furthermore, system response is linear with DNA fragment length, in contrast to the logarithmic response in gel electrophoresis. There exists the potential to perform this sizing using relatively simple instrumentation, i.e. a continuous wave laser of low power and current mode detection.

  10. Sizing of DNA fragments by flow cytometry

    SciTech Connect (OSTI)

    Johnson, M.E.; Goodwin, P.M.; Ambrose, W.P.; Martin, J.C.; Marrone, B.L.; Jett, J.H.; Keller, R.A.

    1993-01-01

    Individual, stained DNA fragments were sized using a modified flow cytometer with high sensitivity fluorescence detection. The fluorescent intercalating dye ethidium homodimer was used to stain stoichiometrically lambda phage DNA and a Kpn I digest of lambda DNA. Stained, individual fragments of DNA were passed through a low average power, focused, mode-locked laser beam, and the fluorescence from each fragment was collected and quantified. Time-gated detection was used to discriminate against Raman scattering from the water solvent. The fluorescence burst from each fragment was related directly to its length, thus providing a means to size small quantities of kilobase lengths of DNA quickly. Improvements of several orders of magnitude in analysis time and sample size over current gel electrophoresis techniques were realized. Fragments of 17.1,29.9, and 48.5 thousand base pairs were well resolved, and were sized in 164 seconds. Less than one pg of DNA was required for analysis. We have demonstrated sizing of individual, stained DNA fragments with resolution approaching that of gel electrophoresis for moderately large fragments, but with significant reductions in the analysis time and the amount of sample required. Furthermore, system response is linear with DNA fragment length, in contrast to the logarithmic response in gel electrophoresis. There exists the potential to perform this sizing using relatively simple instrumentation, i.e. a continuous wave laser of low power and current mode detection.

  11. NERSC Online Training May 3: Navigating NERSC File Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Online Training May 3: Navigating NERSC File Systems NERSC Online Training May 3: Navigating NERSC File Systems April 26, 2011 by Richard Gerber A NERSC training event, "Navigating NERSC File Systems," will be presented Tuesday, May 3, 2011, from 10:00 -11:00 PDT. This event was postponed from April 26. The event will be presented simultaneously at the NERSC Oakland Scientific Facility and as a webcast. NERSC hosts a number of file storage systems, each with its unique characteristics.

  12. Online at the Energy Department | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    at the Energy Department Online at the Energy Department March 7, 2013 - 2:06pm Addthis Online at the Energy Department April Saylor April Saylor Former Digital Outreach Strategist, Office of Public Affairs Follow Us: Pinterest Google+ Facebook Twitter Energy Saver Facebook If you're one of the millions of people using social-sharing site Pinterest, we have some exciting news: we're launching the Energy Department's official Pinterest page at pinterest.com/energy. There, you'll find pinboards

  13. Zhong Wang, Ph.D. Group Lead, Genome Analysis National Microbiome Initiative

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Explore Spark for Metagenome assembly Zhong Wang, Ph.D. Group Lead, Genome Analysis National Microbiome Initiative Environmental microbial communities are complex 1 10 100 1000 10000 Human Soil Number of Species Cow >90% of the species haven't been seen before Decode Metagenome Metagenome Short Reads Shotgun Sequencing Metagenome Assembly Assembled Genomes Billions of pieces Terabytes in size "Big Data" Library of Books Shredded Library "reconstructed" Library Genome ~=

  14. Next to leading order spin(1)spin(1) effects in the motion of inspiralling compact binaries

    SciTech Connect (OSTI)

    Porto, Rafael A.; Rothstein, Ira Z.

    2008-08-15

    Using effective field theory techniques we compute the next to leading order Spin(1)Spin(1) terms in the potential of spinning compact objects at third post-Newtonian (PN) order, including subleading self-induced finite size effects. This result represents the last ingredient to complete the relevant spin potentials to 3PN order from which the equations of motion follow via a canonical formalism. As an example we include the precession equation.

  15. Investigations of initiation spot size effects

    SciTech Connect (OSTI)

    Clarke, Steven A; Akinci, Adrian A; Leichty, Gary; Schaffer, Timothy; Murphy, Michael J; Munger, Alan; Thomas, Keith A

    2010-01-01

    As explosive components become smaller, a greater understanding of the effect of initiation spot size on detonation becomes increasingly critical. A series of tests of the effect of initiation spot size will be described. A series of DOI (direct optical initiation) detonators with initiation spots sizes from {approx}50 um to 1000um have been tested to determine laser parameters for threshold firing of low density PETN pressings. Results will be compared with theoretical predictions. Outputs of the initiation source (DOI ablation) have been characterized by a suite of diagnostics including PDV and schlieren imaging. Outputs of complete detonators have been characterized using PDV, streak, and/or schlieren imaging. At present, we have not found the expected change in the threshold energy to spot size relationship for DOI type detonators found in similar earlier for projectiles, slappers and EBWs. New detonators designs (Type C) are currently being tested that will allow the determination of the threshold for spot sizes from 250 um to 105um, where we hope to see change in the threshold vs. spot size relationship. Also, one test of an extremely small diameter spot size (50um) has resulted in preliminary NoGo only results even at energy densities as much as 8 times the energy density of the threshold results presented here. This gives preliminary evidence that 50um spot may be beyond the critical initiation diameter. The constant threshold energy to spot size relationship in the data to date does however still give some insight into the initiation mechanism of DOI detonators. If the DOI initiation mechanism were a 1D mechanism similar to a slapper or a flyer impact, the expected inflection point in the graph would have been between 300um and 500um diameter spot size, within the range of the data presented here. The lack of that inflection point indicates that the DOI initiation mechanism is more likely a 2D mechanism similar to a sphere or rod projectile. We expect to

  16. Characterization and dispersion of pollutant releases from the abrasive blasting of lead paint from steel bridges

    SciTech Connect (OSTI)

    Lee, M.; Rana, B.

    1999-07-01

    The characterization of airborne and spent material for abrasive blasting of steel paint was performed as part of the Environmental Impact Statement for Lead Paint Removal Operations on New York City Department of Transportation Bridges1. Laboratory tests were performed on painted steel components of the Williamsburg Bridge, to determine the sizes of particles typically released into the air as aerosol and onto the ground as bulk material, as a result of accidental releases from abrasive blasting operations. Two of the most commonly used abrasives for paint removal on steel structures, recyclable steel grit and expendable abrasives were subjected to the laboratory tests. The results of the tests were used to determine the percentage of existing paint and abrasive which becomes airborne and the resultant particle size distributions, which were employed in the air quality concentration and deposition modeling for the EIS. Particle size distributions of the airborne material indicated that the profiles of airborne lead and particulate matter have a mean particle size between 15 and 21 microns. Spent abrasives and paint chips that settle on the floor are larger in size with a mean diameter greater than 259 microns, although up to 6% of this material has a mean diameter less than 50 microns. The percentage of paint and expendable abrasives that become airborne as a result of abrasive blasting were estimated to be as high as 9.0 and 12.4%, respectively. Potential release rates were derived for total accumulation (duration of the project), annual, quarterly, 24-hour, and 1-hour time averaging periods for abrasives, lead, and other metals. Pollutant releases were simulated as individual sources at multiple release heights with the Environment Protection Agency's ISC3ST model for six representative bridges near potential places of public exposure.

  17. Ultrasound in lead-bismuth eutectic

    SciTech Connect (OSTI)

    Dierckx, M.; Van Dyck, D.

    2011-07-01

    The Belgian Nuclear Research Centre (SCK.CEN) is in the process of designing MYRRHA, a new multi-purpose irradiation facility to replace the ageing BR2. MYRRHA is a fast spectrum reactor cooled with lead-bismuth eutectic (LBE). As liquid metal is opaque to visual light, ultrasonic measurement techniques are selected to fulfill essential tasks that, according to our assessment, will be demanded by licensing authorities, in particular: fuel assembly identification and localization of a lost fuel assembly. To that end, a considerable research effort at SCK.CEN is devoted to study ultrasonic propagation in LBE. As ultrasonic experiments in LBE are elaborate and expensive to set up, we are particularly interested in to what extent experiments in water can be extrapolated to LBE - one of the main focuses of this article. We describe and present results of a first experiment with this goal which shows that the signal to noise ratio is better in LBE and that we even see small diffuse reflections up to 40 deg. off normal. On the other hand, we do not see internal reflections in stainless steel objects in LBE which we do in water. Therefore, we conclude that experiments in water can be used to validate algorithms for LBE on the condition that they do not rely on internal reflections. We also present solutions to tackle the essential tasks: fuel assembly identification and lost object localization. The requirements for the ultrasonic equipment implementing these solutions are also discussed. (authors)

  18. Get the lead out! removing lead-based paint on hydro plant structures

    SciTech Connect (OSTI)

    Johnson, M.L.

    1996-05-01

    This article describes a hydroblasting technology used to remove lead-based surface coatings from the steel associated with the flood gates at the Wirtz Dam. Using this technology and an advanced moisture-cured urethane coating, the Lower Colorado River Authority was able to save more than $250,000 in materials, labor, and waste disposal costs.

  19. Microsoft Word - Final Lead Assembly SA.doc

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... of European Fabrication of Lead MOX Assemblies. ...... 20 Table 4. Comparison of Human Health ...

  20. Building Standards Lead-by-Example Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Standards Lead-by-Example Resources Building Standards Lead-by-Example Resources State and local governments can lead by example by promoting energy efficiency programs and policies for public facilities, equipment, and government operations. Find building standards lead-by-example resources below. DOE Resource National Best Practices Manual For Building High Performance Schools. Other Resource Roadmap to Green Government Buildings

  1. MULTI-TUBE POWER LEADS TOWER FOR BEPCII IR MAGNETS.

    SciTech Connect (OSTI)

    JIA,L.X.; ZHANG,X.B.; WANG,L.; WANG,T.H.; YAO,Z.L.

    2004-05-11

    A power lead tower containing the multi-tube power leads is designed and under fabrication for the superconducting IR quadrupole magnets in the Beijing Electron Position Collider Upgrade (BEPCII). The lead tower consists of six pairs of gas-cooled leads for seven superconducting coils at various operating currents. The power lead is designed in a modular fashion, which can be easily applied to suit different operating current. The end copper block of the tube lead has a large cold mass that provide a large time constant in case of cooling flow interruption. A novel cryogenic electrical isolator is used for the leads.

  2. IEA-GIA ExCo - National Geothermal Data System and Online Tools...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    IEA-GIA ExCo - National Geothermal Data System and Online Tools IEA-GIA ExCo - National Geothermal Data System and Online Tools National Geothermal Data System presentation by Jay ...

  3. How to Create a Quality Control Checklist using the SWS Online...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Create a Quality Control Checklist using the SWS Online Tool How to Create a Quality Control Checklist using the SWS Online Tool This document explains How to Create a Quality ...

  4. Solar and the City: Online Map to Show NYC's Solar Potential...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and the City: Online Map to Show NYC's Solar Potential Solar and the City: Online Map to Show NYC's Solar Potential October 13, 2010 - 11:32am Addthis Stephen Graff Former Writer & ...

  5. IEA-GIA ExCo - National Geothermal Data System and Online Tools...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    IEA-GIA ExCo - National Geothermal Data System and Online Tools IEA-GIA ExCo - National Geothermal Data System and Online Tools National Geothermal Data System presentation by Jay...

  6. The flexoelectric effect associated size dependent pyroelectricity in solid dielectrics

    SciTech Connect (OSTI)

    Bai, Gang; Liu, Zhiguo; Xie, Qiyun; Guo, Yanyan; Li, Wei; Yan, Xiaobing

    2015-09-15

    A phenomenological thermodynamic theory is used to investigate the effect of strain gradient on the pyroelectric effect in centrosymmetric dielectric solids. Direct pyroelectricity can exist as external mechanical stress is applied to non-pyroelectric dielectrics with shapes such as truncated pyramids, due to elastic strain gradient induced flexoelectric polarization. Effective pyroelectric coefficient was analyzed in truncated pyramids. It is found to be controlled by size, ambient temperature, stress, and aspect ratio and depends mainly on temperature sensitivity of flexoelectric coefficient (TSFC) and strain gradient of the truncated pyramids dielectric solids. These results show that the pyroelectric property of Ba{sub 0.67}Sr{sub 0.33}TiO{sub 3} above T{sub c} similar to PZT and other lead-based ferroelectrics can be obtained. This feature might widely broaden the selection of materials for infrared detectors with preferable properties.

  7. Trends Online: A Compendium of Data on Global Change

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Trends Online provides synopses of frequently used time series of global-change data: • historical and modern records (from ice cores and current monitoring stations) of atmospheric concentrations of carbon dioxide (CO2) • atmospheric concentrations of methane • isotopic measurements (14C et al.) for atmospheric greenhouse gases • estimates of global, regional, and national CO2 emissions from the combustion of fossil fuels, gas flaring, and the production of cement • global emissions estimates for methane (CH4) • carbon flux from land-cover change • long-term temperature records, whose spatial coverage ranges from individual sites to the entire globe and from the Earth's surface to the lower stratosphere • total cloud amount over China • ecosystems (area and carbon content) Data records are presented in multipage formats, each dealing with a specific site, region, or emissions species. The data records include tables; graphs; discussions of methods for collecting, measuring, and reporting the data; trends in the data, and references to literature providing further information. Instructions for citing specific data in Trends Online are provided for each compiled data set. All data appearing in Trends Online are available, on request, on digital media from CDIAC at no cost. [Copied from the Abstract to Trends Online at http://cdiac.ornl.gov/trends/abstract.htm

  8. online Surveillance of Industrial Processes with Correlated Parameters

    Energy Science and Technology Software Center (OSTI)

    1996-12-18

    SMP is a system for online surveillance of industrial processes or machinery for determination of the incipience or onset of abnormal operating conditions. SMP exploits the cross correlation between all of the sensors that are available on the system under surveillance to provide an extremely high sensitivity for annunciation of subtle disturbances in process variables.

  9. JLab Scientist Discusses Higgs Announcement (Tampa Bay Online) | Jefferson

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lab Scientist Discusses Higgs Announcement (Tampa Bay Online) External Link: http://www2.tbo.com/news/opinion/2012/jul/16/naopino1-no-cause-for-envy-in-higgs... By jlab_admin on Mon, 2012-07-16

  10. OMB memorandum M-13-10, Antideficiency Act Implications of Certain Online

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Terms of Service Agreements | Department of Energy OMB memorandum M-13-10, Antideficiency Act Implications of Certain Online Terms of Service Agreements OMB memorandum M-13-10, Antideficiency Act Implications of Certain Online Terms of Service Agreements Attached for your information and appropriate action is OMB memorandum M-13-10, Antideficiency Act Implications of Certain Online Terms of Service Agreements. The concerns raised by the memo relate primarily to use of online social media

  11. Size separation of analytes using monomeric surfactants

    DOE Patents [OSTI]

    Yeung, Edward S.; Wei, Wei

    2005-04-12

    A sieving medium for use in the separation of analytes in a sample containing at least one such analyte comprises a monomeric non-ionic surfactant of the of the general formula, B-A, wherein A is a hydrophilic moiety and B is a hydrophobic moiety, present in a solvent at a concentration forming a self-assembled micelle configuration under selected conditions and having an aggregation number providing an equivalent weight capable of effecting the size separation of the sample solution so as to resolve a target analyte(s) in a solution containing the same, the size separation taking place in a chromatography or electrophoresis separation system.

  12. Strategic Petroleum Reserve: Analysis of size options

    SciTech Connect (OSTI)

    Not Available

    1990-02-01

    This report presents the results of the deliberations of the interagency group formed to study the costs and benefits of expanding the size of the SPR. The study concentrated on severe oil supply disruptions involving sharp reductions in world oil production that were 2 to 4 times larger than the largest 1970s interruption. The disruption sizes and estimated probability of occurrence of these scenarios were supplied by the CIA. The most critical part of the CIA's analysis was the assessment of likelihood of these cases occurring. The CIA approached the likelihood problem by combining an examination of past oil supply disruptions with qualitative analysis of important oil market and regional trends. The study group then used statistical techniques and probability distributions to synthesize the historical data with CIA evaluations of as yet unobserved events. The SPR size study assumed direct purchases of SPR oil and did not assume the use of alternative financing mechanisms. Members of the working group with foreign policy and national security responsibilities provided an in-depth review of strategic considerations affecting SPR size. A number of prior studies, some classified, have addressed the strategic importance and insurance value of the SPR to the US and its allies. The results of these studies have also been incorporated in the current effort. 10 refs., 5 figs.

  13. Remote Automatic Material On-Line Sensor

    SciTech Connect (OSTI)

    Magnuson, Erik

    2005-12-20

    Low cost NMR sensor for measuring moisture content of forest products. The Department of Energy (DOE) Industries of the Future (IOF) program seeks development and implementation of technologies that make industry more efficient--in particular, more energy-efficient. Quantum Magnetics, Inc. (QM), a wholly-owned subsidiary of GE Security, received an award under the program to investigate roles for low-cost Nuclear Magnetic Resonance (NMR) technology in furtherance of these goals. Most NMR systems are designed for high-resolution spectroscopy applications. These systems use intense magnetic fields produced by superconducting magnets that drive price and operating cost to levels beyond industry tolerance. At low magnetic fields, achievable at low cost, one loses the ability to obtain spectroscopic information. However, measuring the time constants associated with the NMR signal, called NMR relaxometry, gives indications of chemical and physical states of interest to process control and optimization. It was the purpose of this effort to investigate the technical and economic feasibility of using such low-field, low-cost NMR to monitor parameters enabling greater process efficiencies. The primary target industry identified in the Cooperative Development Agreement was the wood industry, where the moisture content of wood is a key process parameter from the time the cut tree enters a mill until the time it is delivered as pieces of lumber. Extracting the moisture is energy consuming, and improvements in drying efficiency stand to reduce costs and emissions substantially. QM designed and developed a new, low-cost NMR instrument suitable for inspecting lumber up to 3 inches by 12 inches in cross section, and other materials of similar size. Low cost is achieved via an inexpensive, permanent magnet and low-cost NMR spectrometer electronics. Laboratory testing demonstrated that the NMR system is capable of accurate ({+-} 0.5%) measurements of the moisture content of wood for

  14. Evolution of soot size distribution in premixed ethylene/air and ethylene/benzene/air flames: Experimental and modeling study

    SciTech Connect (OSTI)

    Echavarria, Carlos A.; Sarofim, Adel F.; Lighty, JoAnn S.; D'Anna, Andrea

    2011-01-15

    The effect of benzene concentration in the initial fuel on the evolution of soot size distribution in ethylene/air and ethylene/benzene/air flat flames was characterized by experimental measurements and model predictions of size and number concentration within the flames. Experimentally, a scanning mobility particle sizer was used to allow spatially resolved and online measurements of particle concentration and sizes in the nanometer-size range. The model couples a detailed kinetic scheme with a discrete-sectional approach to follow the transition from gas-phase to nascent particles and their coagulation to larger soot particles. The evolution of soot size distribution (experimental and modeled) in pure ethylene and ethylene flames doped with benzene showed a typical nucleation-sized (since particles do not actually nucleate in the classical sense particle inception is often used in place of nucleation) mode close to the burner surface, and a bimodal behavior at greater height above burner (HAB). However, major features were distinguished between the data sets. The growth of nucleation and agglomeration-sized particles was faster for ethylene/benzene/air flames, evidenced by the earlier presence of bimodality in these flames. The most significant changes in size distribution were attributed to an increase in benzene concentration in the initial fuel. However, these changes were more evident for high temperature flames. In agreement with the experimental data, the model also predicted the decrease of nucleation-sized particles in the postflame region for ethylene flames doped with benzene. This behavior was associated with the decrease of soot precursors after the main oxidation zone of the flames. (author)

  15. Laser capillary spectrophotometric acquisition of bivariate drop size and concentration data for liquid-liquid dispersion

    DOE Patents [OSTI]

    Tavlarides, L.L.; Bae, J.H.

    1991-12-24

    A laser capillary spectrophotometric technique measures real time or near real time bivariate drop size and concentration distribution for a reactive liquid-liquid dispersion system. The dispersion is drawn into a precision-bore glass capillary and an appropriate light source is used to distinguish the aqueous phase from slugs of the organic phase at two points along the capillary whose separation is precisely known. The suction velocity is measured, as is the length of each slug from which the drop free diameter is calculated. For each drop, the absorptivity at a given wavelength is related to the molar concentration of a solute of interest, and the concentration of given drops of the organic phase is derived from pulse heights of the detected light. This technique permits on-line monitoring and control of liquid-liquid dispersion processes. 17 figures.

  16. Laser capillary spectrophotometric acquisition of bivariate drop size and concentration data for liquid-liquid dispersion

    DOE Patents [OSTI]

    Tavlarides, Lawrence L. (Fayetteville, NY); Bae, Jae-Heum (Daejeon, KR)

    1991-01-01

    A laser capillary spectrophotometric technique measures real time or near real time bivariate drop size and concentration distribution for a reactive liquid-liquid dispersion system. The dispersion is drawn into a precision-bore glass capillary and an appropriate light source is used to distinguish the aqueous phase from slugs of the organic phase at two points along the capillary whose separation is precisely known. The suction velocity is measured, as is the length of each slug from which the drop free diameter is calculated. For each drop, the absorptivity at a given wavelength is related to the molar concentration of a solute of interest, and the concentration of given drops of the organic phase is derived from pulse heights of the detected light. This technique permits on-line monitoring and control of liquid-liquid dispersion processes.

  17. Engineer Russ Feder leads development of diagnostic tools for...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineer Russ Feder leads development of diagnostic tools for US ITER as physicist Dave ... Feder leads PPPL's development of all diagnostic tools for US ITER, which manages U.S. ...

  18. Zarb Appointed to Lead the Federal Energy Administration | National Nuclear

    National Nuclear Security Administration (NNSA)

    Security Administration | (NNSA) Zarb Appointed to Lead the Federal Energy Administration Zarb Appointed to Lead the Federal Energy Administration Washington, DC President Ford appoints Frank Zarb to be the first Administrator of the newly created Federal Energy Agency

  19. PNNL Breakthrough Leads to Less Foreign Oil, More American Jobs...

    Energy Savers [EERE]

    PNNL Breakthrough Leads to Less Foreign Oil, More American Jobs PNNL Breakthrough Leads to Less Foreign Oil, More American Jobs October 17, 2011 - 2:50pm Addthis A highly efficient ...

  20. DOE ZERH Second Leading Builder Round Table Meeting Report |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE ZERH Second Leading Builder Round Table Meeting Report On October 23rd-24th, 2014, the ZERH program held its Second Leading Production Builder Round Table Meeting in Suwanee, ...

  1. Energy Department to Lead Workshop on Tribal Renewable Energy...

    Office of Environmental Management (EM)

    Lead Workshop on Tribal Renewable Energy Development in Oklahoma Energy Department to Lead Workshop on Tribal Renewable Energy Development in Oklahoma June 1, 2015 - 9:50am Addthis ...

  2. Fatal pediatric poisoning from leaded paint--Wisconsin, 1990

    SciTech Connect (OSTI)

    Not Available

    1991-03-29

    Although fatal lead poisoning among children occurs rarely in the United States, it represents a medical and public health emergency. This report summarizes the investigation of a child who died from poisoning associated with ingestion of lead-based paint.

  3. Anaerobic microbial dissolution of lead and production of organic acids

    DOE Patents [OSTI]

    Francis, A.J.; Dodge, C.; Chendrayan, K.

    1986-02-28

    The present invention relates to a method of solubilizing lead, in the form of lead oxide, found in industrial wastes, before these wastes are dumped into the environment. The lead is solubilized by dissolving the lead oxide in the wastes through contact with an anaerobic bacterial culture containing the bacterium ATCC No. 53464. The solubilized lead can then be removed from the wastes by chemical separation. It could also be removed by extending the contact period with the bacterial culture. As the culture grows, the solubilized lead is removed from the wastes by bioaccumulation by the microorganism or by immobilization by a polymer-like material produced by the microorganism. At this point, the lead is then removed from the wastes when the waste material is separated from the bacterial culture. If desired, the bacterial culture could be digested at this point to yield relatively pure lead for further industrial use.

  4. GE leads the way in photonics research | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    GE continues leading role in photonics industry - from LED to digital x-ray Click to email ... GE continues leading role in photonics industry - from LED to digital x-ray Danielle ...

  5. Crystal structure and compressibility of lead dioxide up to 140...

    Office of Scientific and Technical Information (OSTI)

    Crystal structure and compressibility of lead dioxide up to 140 GPa Citation Details In-Document Search Title: Crystal structure and compressibility of lead dioxide up to 140 GPa ...

  6. Proper Assessment of the JFK Assassination Bullet Lead Evidence from Metallurgical and Statistical Perspectives

    SciTech Connect (OSTI)

    Randich, E; Grant, P M

    2006-08-29

    The bullet evidence in the JFK assassination investigation was reexamined from metallurgical and statistical standpoints. The questioned specimens are comprised of soft lead, possibly from full-metal-jacketed Mannlicher-Carcano, 6.5-mm ammunition. During lead refining, contaminant elements are removed to specified levels for a desired alloy or composition. Microsegregation of trace and minor elements during lead casting and processing can account for the experimental variabilities measured in various evidentiary and comparison samples by laboratory analysts. Thus, elevated concentrations of antimony and copper at crystallographic grain boundaries, the widely varying sizes of grains in Mannlicher-Carcano bullet lead, and the 5-60 mg bullet samples analyzed for assassination intelligence effectively resulted in operational sampling error for the analyses. This deficiency was not considered in the original data interpretation and resulted in an invalid conclusion in favor of the single-bullet theory of the assassination. Alternate statistical calculations, based on the historic analytical data, incorporating weighted averaging and propagation of experimental uncertainties also considerably weaken support for the single-bullet theory. In effect, this assessment of the material composition of the lead specimens from the assassination concludes that the extant evidence is consistent with any number between two and five rounds fired in Dealey Plaza during the shooting.

  7. Getting the lead out: Citizen involvement in the Williamsburg Bridge lead paint removal project

    SciTech Connect (OSTI)

    Forker, T.R.

    1997-08-01

    This paper examines the process and results of citizen involvement in developing new environmental control and compliance procedures used by the New York City Department of Transportation (NYC DOT) for lead paint removal on the Williamsburg Bridge and other structures. As a case study of the effects of public involvement in environmental decision-making, the study identifies and discusses the factors that produced failures or successes in satisfying the citizen`s concerns about health risks and the effectiveness of the selected pollution control technology.

  8. Alternative Fuels Data Center: Smoky Mountains Leads the Way in

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Implementing Alternative Fuels Smoky Mountains Leads the Way in Implementing Alternative Fuels to someone by E-mail Share Alternative Fuels Data Center: Smoky Mountains Leads the Way in Implementing Alternative Fuels on Facebook Tweet about Alternative Fuels Data Center: Smoky Mountains Leads the Way in Implementing Alternative Fuels on Twitter Bookmark Alternative Fuels Data Center: Smoky Mountains Leads the Way in Implementing Alternative Fuels on Google Bookmark Alternative Fuels Data

  9. Retrofit Program Lead-by-Example Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Retrofit Program Lead-by-Example Resources Retrofit Program Lead-by-Example Resources State and local governments can lead by example by promoting energy efficiency programs and policies for public facilities, equipment, and government operations. Find retrofit program lead-by-example resources below. Local Government Climate and Energy Strategy Series: Energy Efficiency in Local Government Operations: A Guide to Developing and Implementing Greenhouse Gas Reduction Programs ACEEE: Comprehensive

  10. Procurement Standards Lead-by-Example Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Procurement Standards Lead-by-Example Resources Procurement Standards Lead-by-Example Resources State and local governments can lead by example by promoting energy efficiency programs and policies for public facilities, equipment, and government operations. Find procurement standards lead-by-example resources below. DOE Resource Energy-Efficient Product Procurement. Other Resources ENERGY STAR®: All Certified Products New York State Energy Research and Development Authority: Procurement

  11. 2015 Leading Builder Round Table Report | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Leading Builder Round Table Report 2015 Leading Builder Round Table Report The nation is on the cusp of a dramatic movement to zero energy ready homes. This includes statewide codes, large developments, and a growing amount of commitment to the DOE Zero Energy Ready Home program. Much of this progress can be attributed to a small contingent of our nation's leading builders who are demonstrating the technical, cost, and design feasibility for this level of excellence At the 2015 Leading Builder

  12. Cities Leading Through Energy Analysis and Planning Infographic |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Cities Leading Through Energy Analysis and Planning Infographic Cities Leading Through Energy Analysis and Planning Infographic The Cities Leading through Energy Analysis and Planning (Cities-LEAP) project delivers standardized, localized energy data and analysis that enables cities to lead clean energy innovation and integrate strategic energy analysis into decision making. Two Cities-LEAP infographics catalog the programs and tools currently supporting local

  13. Calibration of optical particle-size analyzer

    DOE Patents [OSTI]

    Pechin, William H.; Thacker, Louis H.; Turner, Lloyd J.

    1979-01-01

    This invention relates to a system for the calibration of an optical particle-size analyzer of the light-intercepting type for spherical particles, wherein a rotary wheel or disc is provided with radially-extending wires of differing diameters, each wire corresponding to a particular equivalent spherical particle diameter. These wires are passed at an appropriate frequency between the light source and the light detector of the analyzer. The reduction of light as received at the detector is a measure of the size of the wire, and the electronic signal may then be adjusted to provide the desired signal for corresponding spherical particles. This calibrator may be operated at any time without interrupting other processing.

  14. The price of commitment in online stochastic vehicle routing

    SciTech Connect (OSTI)

    Bent, Russell W; Van Hentenryck, Pascal

    2009-01-01

    This paper considers online stochastic multiple vehicle routing with time windows in which requests arrive dynamically and the goal is to maximize the number of serviced customers. Early work has focused on very flexible routing settings where the decision to assign a vehicle to a customer is delayed until a vehicle is actually deployed to the customer. Motivated by real applications that require stability in the decision making, this paper considers a setting where the decision to assign a customer request to a vehicle must be taken when that request is accepted. Experimental results suggest that this constraint severely degrades the performance of existing algorithms. However, the paper shows how the use of stochastic information for vehicle assignment and request acceptance improves decision quality considerably. Moreover, the use of resource augmentation quantifies precisely the cost of commitment in online vehicle routing.

  15. Communication: Nucleation of water on ice nanograins: Size, charge, and quantum effects

    SciTech Connect (OSTI)

    Marciante, Mathieu; Calvo, Florent

    2015-05-07

    The sticking cross sections of water molecules on cold size-selected water clusters have been simulated using classical and quantum (path-integral) molecular dynamics trajectories under realistic conditions. The integrated cross sections for charged clusters show significant size effects with comparable trends as in experiments, as well as essentially no sign effect. Vibrational delocalization, although it contributes to enlarging the geometric cross sections, leads to a counter-intuitive decrease in the dynamical cross section obtained from the trajectories. These results are interpreted based on the apparent reduction in the effective interaction between the projectile and the target owing to zero-point effects.

  16. NNSA Leads Conference on Nonproliferation Research and Development |

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration | (NNSA) Leads Conference on Nonproliferation Research and Development December 04, 2008 WASHINGTON, D.C. -- The National Nuclear Security Administration (NNSA) concluded a conference showcasing the leading edge nuclear nonproliferation research being conducted at premier universities and by industry experts. The University and Industry Technical Interchange (UITI) included over 75 presentations by leading researchers to showcase nuclear detection

  17. Quantum size effects in classical hadrodynamics

    SciTech Connect (OSTI)

    Nix, J.R.

    1994-03-01

    The author discusses future directions in the development of classical hydrodynamics for extended nucleons, corresponding to nucleons of finite size interacting with massive meson fields. This new theory provides a natural covariant microscopic approach to relativistic nucleus-nucleus collisions that includes automatically spacetime nonlocality and retardation, nonequilibrium phenomena, interactions among all nucleons, and particle production. The present version of the theory includes only the neutral scalar ({sigma}) and neutral vector ({omega}) meson fields. In the future, additional isovector pseudoscalar ({pi}{sup +}, {pi}{sup {minus}}, {pi}{sup 0}), isovector vector ({rho}{sup +}, {rho}{sup {minus}}, {rho}{sup 0}), and neutral pseudoscalar ({eta}) meson fields should be incorporated. Quantum size effects should be included in the equations of motion by use of the spreading function of Moniz and Sharp, which generates an effective nucleon mass density smeared out over a Compton wavelength. However, unlike the situation in electrodynamics, the Compton wavelength of the nucleon is small compared to its radius, so that effects due to the intrinsic size of the nucleon dominate.

  18. AmiGO: online access to ontology and annotation data

    SciTech Connect (OSTI)

    Carbon, Seth; Ireland, Amelia; Mungall, Christopher J.; Shu, ShengQiang; Marshall, Brad; Lewis, Suzanna

    2009-01-15

    AmiGO is a web application that allows users to query, browse, and visualize ontologies and related gene product annotation (association) data. AmiGO can be used online at the Gene Ontology (GO) website to access the data provided by the GO Consortium; it can also be downloaded and installed to browse local ontologies and annotations. AmiGO is free open source software developed and maintained by the GO Consortium.

  19. Online Monitoring of Plant Assets in the Nuclear Industry

    SciTech Connect (OSTI)

    Nancy Lybeck; Vivek Agarwal; Binh Pham; Richard Rusaw; Randy Bickford

    2013-10-01

    Today’s online monitoring technologies provide opportunities to perform predictive and proactive health management of assets within many different industries, in particular the defense and aerospace industries. The nuclear industry can leverage these technologies to enhance safety, productivity, and reliability of the aging fleet of existing nuclear power plants. The U.S. Department of Energy’s Light Water Reactor Sustainability Program is collaborating with the Electric Power Research Institute’s (EPRI’s) Long-Term Operations program to implement online monitoring in existing nuclear power plants. Proactive online monitoring in the nuclear industry is being explored using EPRI’s Fleet-Wide Prognostic and Health Management (FW-PHM) Suite software, a set of web-based diagnostic and prognostic tools and databases that serves as an integrated health monitoring architecture. This paper focuses on development of asset fault signatures used to assess the health status of generator step-up transformers and emergency diesel generators in nuclear power plants. Asset fault signatures describe the distinctive features based on technical examinations that can be used to detect a specific fault type. Fault signatures are developed based on the results of detailed technical research and on the knowledge and experience of technical experts. The Diagnostic Advisor of the FW-PHM Suite software matches developed fault signatures with operational data to provide early identification of critical faults and troubleshooting advice that could be used to distinguish between faults with similar symptoms. This research is important as it will support the automation of predictive online monitoring techniques in nuclear power plants to diagnose incipient faults, perform proactive maintenance, and estimate the remaining useful life of assets.

  20. One in five online scholarly articles affected by 'reference rot'

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Scholarly articles affected by 'reference rot' One in five online scholarly articles affected by 'reference rot' Los Alamos authors focus on reference rot, the combination of link rot and content drift to which references to web resources included in STM articles are subject. January 26, 2015 From left, Los Alamos National Laboratory authors Lyudmila Balakireva, Herbert Van De Sompel and Harihar Shankar, and Martin Klein and Robert Sanderson (on computer screens). Their work was published in the

  1. Online Monitoring Technical Basis and Analysis Framework for Large Power

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Transformers; Interim Report for FY 2012 | Department of Energy for Large Power Transformers; Interim Report for FY 2012 Online Monitoring Technical Basis and Analysis Framework for Large Power Transformers; Interim Report for FY 2012 The Light Water Reactor Sustainability Program is a research, development, and deployment program sponsored by the U.S. Department of Energy Office of Nuclear Energy. The program is operated in collaboration with the Electric Power Research Institute's (EPRI's)

  2. Expert system for online surveillance of nuclear reactor coolant pumps

    DOE Patents [OSTI]

    Gross, Kenny C.; Singer, Ralph M.; Humenik, Keith E.

    1993-01-01

    An expert system for online surveillance of nuclear reactor coolant pumps. This system provides a means for early detection of pump or sensor degradation. Degradation is determined through the use of a statistical analysis technique, sequential probability ratio test, applied to information from several sensors which are responsive to differing physical parameters. The results of sequential testing of the data provide the operator with an early warning of possible sensor or pump failure.

  3. Identifying Differences in Cultural Behavior in Online Groups

    SciTech Connect (OSTI)

    Gregory, Michelle L.; Engel, David W.; Bell, Eric B.; Mcgrath, Liam R.

    2012-07-23

    We have developed methods to identify online communities, or groups, using a combination of structural information variables and content information variables from weblog posts and their comments to build a characteristic footprint for groups. We have worked with both explicitly connected groups and 'abstract' groups, in which the connection between individuals is in interest (as determined by content based features) and behavior (metadata based features) as opposed to explicit links. We find that these variables do a good job at identifying groups, placing members within a group, and helping determine the appropriate granularity for group boundaries. The group footprint can then be used to identify differences between the online groups. In the work described here we are interested in determining how an individual's online behavior is influenced by their membership in more than one group. For example, individuals belong to a certain culture; they may belong as well to a demographic group, and other 'chosen' groups such as churches or clubs. There is a plethora of evidence surrounding the culturally sensitive adoption, use, and behavior on the Internet. In this work we begin to investigate how culturally defined internet behaviors may influence behaviors of subgroups. We do this through a series of experiments in which we analyze the interaction between culturally defined behaviors and the behaviors of the subgroups. Our goal is to (a) identify if our features can capture cultural distinctions in internet use, and (b) determine what kinds of interaction there are between levels and types of groups.

  4. Sizing a New Water Heater | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Is your water heater the right size for you house? | Photo credit ENERGY STAR Is your water heater the right size for you house? | Photo credit ENERGY STAR A properly sized ...

  5. Sizing a New Water Heater | Department of Energy

    Energy Savers [EERE]

    Heat & Cool Water Heating Sizing a New Water Heater Sizing a New Water Heater Is your water heater the right size for you house? | Photo credit ENERGY STAR Is your water ...

  6. Lab Breakthrough: Lead-free Solder | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lead-free Solder Lab Breakthrough: Lead-free Solder May 24, 2012 - 10:45am Addthis Iver Anderson, senior metallurgist at Ames Laboratory, explains the importance of lead-free solder in taking hazardous lead out of the environment by eliminating it from discarded computers and electronics that wind up in landfills. Anderson led a team that developed a tin-silver-copper replacement for traditional lead-tin solder that has been adopted by more than 50 companies worldwide. View the entire Lab

  7. Lead contamination in the Mallard (Anas platyrhynchos) in Italy

    SciTech Connect (OSTI)

    Tirelli, E.; Maestrini, N.; Govoni, S.; Catelli, E.

    1996-05-01

    The main cause of lead poisoning in waterfowl is due to ingestion of spent lead shot in areas of high hunting pressure . Italian literature on this subject is very scarce and the few available studies concern episodic cases. to contribute to the assessment of the impact of lead shot in waterfowl in Italy, systematic research has been carried out on shorebirds caught for ringing in Tiscany and are continuing on dabbling and diving ducks by checking the presence of lead in blood samples and lead shot in the gizzard. This study targets the mallard duck. 17 refs., 1 fig., 1 tab.

  8. Real-Time Simultaneous Measurements of Size, Density, and Composition...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Simultaneous Measurements of Size, Density, and Composition of Single Ultrafine Diesel Tailpipe Particles Real-Time Simultaneous Measurements of Size, Density, and Composition of ...

  9. Overview of Detailed Chemical Speciation and Particle Sizing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Detailed Chemical Speciation and Particle Sizing for Diesel Exhaust, Both Real Time and Filter Based Measurements Overview of Detailed Chemical Speciation and Particle Sizing for ...

  10. Sandia Energy - Self-Regulated Fabrication of Size-Controlled...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Self-Regulated Fabrication of Size-Controlled Quantum Nanostructures Home Highlights - Energy Research Self-Regulated Fabrication of Size-Controlled Quantum Nanostructures Previous...

  11. Development of Model Filtration Media for Investigating Size...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Model Filtration Media for Investigating Size-Dependent Filtration Efficiency Development of Model Filtration Media for Investigating Size-Dependent Filtration Efficiency A novel ...

  12. CBEI: Coordinating RTUs in Small and Medium Sized Commercial...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Coordinating RTUs in Small and Medium Sized Commercial Buildings - 2015 Peer Review CBEI: Coordinating RTUs in Small and Medium Sized Commercial Buildings - 2015 Peer Review ...

  13. Finite-size effects of hysteretic dynamics in multilayer graphene...

    Office of Scientific and Technical Information (OSTI)

    Publisher's Accepted Manuscript: Finite-size effects of hysteretic dynamics in multilayer graphene on a ferroelectric Prev Next Title: Finite-size effects of hysteretic ...

  14. Magnetic agglomeration method for size control in the synthesis...

    Office of Scientific and Technical Information (OSTI)

    Magnetic agglomeration method for size control in the synthesis of magnetic nanoparticles Title: Magnetic agglomeration method for size control in the synthesis of magnetic ...

  15. Wide size range fast integrated mobility spectrometer

    DOE Patents [OSTI]

    Wang, Jian

    2013-10-29

    A mobility spectrometer to measure a nanometer particle size distribution is disclosed. The mobility spectrometer includes a conduit and a detector. The conduit is configured to receive and provide fluid communication of a fluid stream having a charged nanometer particle mixture. The conduit includes a separator section configured to generate an electrical field of two dimensions transverse to a dimension associated with the flow of the charged nanometer particle mixture through the separator section to spatially separate charged nanometer particles of the charged nanometer particle mixture in said two dimensions. The detector is disposed downstream of the conduit to detect concentration and position of the spatially-separated nanometer particles.

  16. Evaluation of replacement thread lubricants for red lead and graphite in mineral oil

    SciTech Connect (OSTI)

    Jungling, T.L.; Rauth, D.R.; Goldberg, D.

    1998-04-30

    Eight commercially available thread lubricants were evaluated to determine the best replacement for Red Lead and Graphite in Mineral Oil (RLGMO). The evaluation included coefficient of friction testing, high temperature anti-seizing testing, room temperature anti-galling testing, chemical analysis for detrimental impurities, corrosion testing, off-gas testing, and a review of health and environmental factors. The coefficient of friction testing covered a wide variety of factors including stud, nut, and washer materials, sizes, manufacturing methods, surface coatings, surface finishes, applied loads, run-in cycles, and relubrication. Only one lubricant, Dow Corning Molykote P37, met all the criteria established for a replacement lubricant. It has a coefficient of friction range similar to RLGMO. Therefore, it can be substituted directly for RLGMO without changing the currently specified fastener torque values for the sizes, materials and conditions evaluated. Other lubricants did not perform as well as Molykote P37 in one or more test or evaluation categories.

  17. Geochemical Weathering Increases Lead Bioaccessibility in Semi-Arid Mine Tailings

    SciTech Connect (OSTI)

    Hayes, Sarah M.; Webb, Sam M.; Bargar, John R.; O?Day, Peggy A.; Maier, Raina M.; Chorover, Jon

    2012-09-05

    Mine tailings can host elevated concentrations of toxic metal(loid)s that represent a significant hazard to surrounding communities and ecosystems. Eolian transport, capable of translocating small (micrometer-sized) particles, can be the dominant mechanism of toxic metal dispersion in arid or semiarid landscapes. Human exposure to metals can then occur via direct inhalation or ingestion of particulates. The fact that measured doses of total lead (Pb) in geomedia correlate poorly with blood Pb levels highlights a need to better resolve the precise distribution of molecularly speciated metal-bearing phases in the complex particle mixtures. Species distribution controls bioaccessibility, thereby directly impacting health risk. This study seeks to correlate Pb-containing particle size and mineral composition with lability and bioaccessibility in mine tailings subjected to weathering in a semiarid environment. We employed X-ray absorption spectroscopy (XAS) and X-ray fluorescence (XRF), coupled with sequential chemical extractions, to study Pb speciation in tailings from the semiarid Arizona Klondyke State Superfund Site. Representative samples ranging in pH from 2.6 to 5.4 were selected for in-depth study of Pb solid-phase speciation. The principle lead-bearing phase was plumbojarosite (PbFe{sub 6}(SO{sub 4}){sub 4}(OH){sub 12}), but anglesite (PbSO{sub 4}) and iron oxide-sorbed Pb were also observed. Anglesite, the most bioavailable mineral species of lead identified in this study, was enriched in surficial tailings samples, where Pb concentrations in the clay size fraction were 2-3 times higher by mass relative to bulk. A mobile and bioaccessible Pb phase accumulates in surficial tailings, with a corresponding increase in risk of human exposure to atmospheric particles.

  18. Leading order hadronic contribution to g-2 from twisted mass QCD

    SciTech Connect (OSTI)

    Dru B Renner, Xu Feng, Karl Jansen, Marcus Petschlies

    2010-06-01

    We calculate the leading order hadronic contribution to the muon anomalous magnetic moment using twisted mass lattice QCD. The pion masses range from 330 MeV to 650 MeV. We use two lattice spacings, a=0.079 fm and 0.063 fm, to study lattice artifacts. Finite-size effects are studied for two values of the pion mass, and we calculate the disconnected contributions for four ensembles. Particular attention is paid to the dominant contributions of the vector mesons, both phenomenologically and from our lattice calculation.

  19. Right-Sizing Laboratory Equipment Loads

    SciTech Connect (OSTI)

    Frenze, David; Greenberg, Steve; Mathew, Paul; Sartor, Dale; Starr, William

    2005-11-29

    Laboratory equipment such as autoclaves, glass washers, refrigerators, and computers account for a significant portion of the energy use in laboratories. However, because of the general lack of measured equipment load data for laboratories, designers often use estimates based on 'nameplate' rated data, or design assumptions from prior projects. Consequently, peak equipment loads are frequently overestimated. This results in oversized HVAC systems, increased initial construction costs, and increased energy use due to inefficiencies at low part-load operation. This best-practice guide first presents the problem of over-sizing in typical practice, and then describes how best-practice strategies obtain better estimates of equipment loads and right-size HVAC systems, saving initial construction costs as well as life-cycle energy costs. This guide is one in a series created by the Laboratories for the 21st Century ('Labs21') program, a joint program of the U.S. Environmental Protection Agency and U.S. Department of Energy. Geared towards architects, engineers, and facilities managers, these guides provide information about technologies and practices to use in designing, constructing, and operating safe, sustainable, high-performance laboratories.

  20. LNG fleet increases in size and capabilities

    SciTech Connect (OSTI)

    Linser, H.J. Jr.; Drudy, M.J.; Endrizzi, F.; Urbanelli, A.A.

    1997-06-02

    The LNG fleet as of early 1997 consisted of 99 vessels with total cargo capacity of 10.7 million cu m, equivalent to approximately 4.5 million tons. One of the newest additions to the fleet, the 137,000-cu m tanker Al Zubarah, is five times the size of the original commercial vessel Methane Princess. Al Zubarah`s first loading of more than 60,000 tons occurred in December 1996 for deliver to Japanese buyers from the newly commissioned Qatargas LNG plant at Ras Laffan. That size cargo contains enough clean-burning energy to heat 60,000 homes in Japan for 1 month. Measuring nearly 1,000 ft long, the tanker is among the largest in the industry fleet and joined 70 other vessels of more than 100,000 cu m. Most LNG tankers built since 1975 have been larger-capacity vessels. The paper discusses LNG shipping requirements, containment systems, vessel design, propulsion, construction, operations and maintenance, and the future for larger vessels.

  1. Optimized Battery-Type Reactor Primary System Design Utilizing Lead

    SciTech Connect (OSTI)

    Yu, Yong H.; Son, Hyoung M.; Lee, Il S.; Suh, Kune Y.

    2006-07-01

    A number of small and medium size reactors are being developed worldwide as well as large electricity generation reactors for co-generation, district heating or desalination. The Seoul National University has started to develop 23 MWth BORIS (Battery Optimized Reactor Integral System) as a multi-purpose reactor. BORIS is an integral-type optimized fast reactor with an ultra long life core. BORIS is being designed to meet the Generation IV nuclear energy system goals of sustainability, safety, reliability and economics. Major features of BORIS include 20 consecutive years of operation without refueling; elimination of an intermediate heat transport loop and main coolant pump; open core without individual subassemblies; inherent negative reactivity feedback; and inherent load following capability. Its one mission is to provide incremental electricity generation to match the needs of developing nations and especially remote communities without major electrical grid connections. BORIS consists of a reactor module, heat exchanger, coolant module, guard vessel, reactor vessel auxiliary cooling system (RVACS), secondary system, containment and the seismic isolation. BORIS is designed to generate 10 MWe with the resulting thermal efficiency of 45 %. BORIS uses lead as the primary system coolant because of the inherent safety of the material. BORIS is coupled with a supercritical carbon dioxide Brayton cycle as the secondary system to gain a high cycle efficiency in the range of 45 %. The reference core consists of 757 fuel rods without assembly with an active core height of 0.8 m. The BORIS core consists of single enrichment zone composed of a Pu-MA (minor actinides)-U-N fuel and a ferritic-martensitic stainless steel clad. This study is intended to set up appropriate reactor vessel geometry by performing thermal hydraulic analysis on RVACS using computational fluid dynamics codes; to examine the liquid metal coolant behavior along the subchannels; to find out whether the

  2. Parameterizing Size Distribution in Ice Clouds

    SciTech Connect (OSTI)

    DeSlover, Daniel; Mitchell, David L.

    2009-09-25

    PARAMETERIZING SIZE DISTRIBUTIONS IN ICE CLOUDS David L. Mitchell and Daniel H. DeSlover ABSTRACT An outstanding problem that contributes considerable uncertainty to Global Climate Model (GCM) predictions of future climate is the characterization of ice particle sizes in cirrus clouds. Recent parameterizations of ice cloud effective diameter differ by a factor of three, which, for overcast conditions, often translate to changes in outgoing longwave radiation (OLR) of 55 W m-2 or more. Much of this uncertainty in cirrus particle sizes is related to the problem of ice particle shattering during in situ sampling of the ice particle size distribution (PSD). Ice particles often shatter into many smaller ice fragments upon collision with the rim of the probe inlet tube. These small ice artifacts are counted as real ice crystals, resulting in anomalously high concentrations of small ice crystals (D < 100 m) and underestimates of the mean and effective size of the PSD. Half of the cirrus cloud optical depth calculated from these in situ measurements can be due to this shattering phenomenon. Another challenge is the determination of ice and liquid water amounts in mixed phase clouds. Mixed phase clouds in the Arctic contain mostly liquid water, and the presence of ice is important for determining their lifecycle. Colder high clouds between -20 and -36 oC may also be mixed phase but in this case their condensate is mostly ice with low levels of liquid water. Rather than affecting their lifecycle, the presence of liquid dramatically affects the cloud optical properties, which affects cloud-climate feedback processes in GCMs. This project has made advancements in solving both of these problems. Regarding the first problem, PSD in ice clouds are uncertain due to the inability to reliably measure the concentrations of the smallest crystals (D < 100 m), known as the small mode. Rather than using in situ probe measurements aboard aircraft, we employed a treatment of ice cloud

  3. An evaluation of chemical screening test kits for lead in paint

    SciTech Connect (OSTI)

    Oglesby, L.S.

    1996-04-01

    The Residential Lead-Based Paint Hazard Reduction Act (Title X) requires abatement and management of lead-based paint. The purpose of this study was to evaluate three chemical screening test kits using materials and methods from one study and subjecting the results to the statistical analysis of another. The three kits were used to predict the presence of lead in paint at ten weight concentrations from 0.04 to 3.97%. Paint was applied to four wood boards yielding a sample size of 40. Four boards were painted with lead-free paint and used as blanks. All of the boards were tested with the three test kits by an untrained individual having no knowledge of the actual lead content. Sensitivity, specificity, and false positive and negative rates were calculated for the test kit results. The manufactures` detection limits, the observed sensitivity ranged from 1.00 to 0.80, specificity ranged from 1.00 to 0.42, false positive ranged from 0 to 58%, and false negatives ranged from 0 to 20%. At the 0.5% Federal threshold level, the observed sensitivity ranged from 1.00 to 0.94, specificity ranged from 1.00 to 0.5, false positives ranged from 0 to 11.1%, and false negatives ranged from 0 to 20%. The observed false positive and false negative rates for all three kits were found to be significantly lower than those reported in a previous study. These results indicate that the kits perform very well at the Federal threshold, with two of the kits having false negative rates below 12.5% and false positive rates of 3.13%. These results indicate that these two kits would probably be acceptable screening tests for lead in paint.

  4. Coal Fired Power Generation Market Size | OpenEI Community

    Open Energy Info (EERE)

    Coal Fired Power Generation Market Size Home There are currently no posts in this category. Syndicate...

  5. Offshore Lubricants Market Size | OpenEI Community

    Open Energy Info (EERE)

    Offshore Lubricants Market Size Home There are currently no posts in this category. Syndicate content...

  6. Energy Secretary Bodman Leads US Delegation to International Energy Agency

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ministerial | Department of Energy Leads US Delegation to International Energy Agency Ministerial Energy Secretary Bodman Leads US Delegation to International Energy Agency Ministerial May 2, 2005 - 12:41pm Addthis PARIS, FRANCE -- Secretary of Energy Samuel W. Bodman this week is leading the U.S. Delegation to the Ministerial Meeting of the International Energy Agency (IEA), being held in Paris. Secretary Bodman will emphasize three principles at the IEA Ministerial -- that energy security

  7. Reversible and irreversible ion migration processes in lead halide

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    perovskites for photovoltaics | MIT-Harvard Center for Excitonics Reversible and irreversible ion migration processes in lead halide perovskites for photovoltaics March 9, 2016 at 4:30 PM/36-462 Eric Hoke Stanford University, Draper Laboratory hoke-eric Lead hybrid perovskites are a promising family of photovoltaic absorber materials that have achieved power conversion efficiencies of over 20%. Lead halide perovskites are ionic materials with a low lattice energy which are unusual properties

  8. EERE Success Story- Hydropower Fellowship Program Leading Students to

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industry Careers | Department of Energy Hydropower Fellowship Program Leading Students to Industry Careers EERE Success Story- Hydropower Fellowship Program Leading Students to Industry Careers April 20, 2016 - 12:15pm Addthis EERE Success Story— Hydropower Fellowship Program Leading Students to Industry Careers The Hydro Research Foundation's (HRF) Hydro Fellowship Program allowed outstanding up-and-coming student fellows to conduct hydropower-related research-all made possible by a

  9. Kjiersten Fagnan Appointed NERSC/JGI Engagement Lead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Kjiersten Fagnan Named NERSC/JGI Engagement Lead Kjiersten Fagnan Appointed NERSC/JGI Engagement Lead September 1, 2014 fagnan.jpg Kjiersten Fagnan has been named the NERSC/JGI Engagement Lead for Joint Genome Institute (JGI) computational and data analysis efforts carried out at the Department of Energy's (DOE) National Energy Research Scientific Computing Center (NERSC). Fagnan, who holds a Ph.D. in Applied Mathematics from the University of Washington, started at NERSC as a petascale postdoc

  10. Bush Administration Plays Leading Role in Studying and Addressing Global

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Climate Change | Department of Energy Plays Leading Role in Studying and Addressing Global Climate Change Bush Administration Plays Leading Role in Studying and Addressing Global Climate Change February 27, 2007 - 3:49pm Addthis Washington, DC - Continuing to take the lead in addressing global climate change, Energy Secretary Samuel Bodman, Environmental Protection Agency (EPA) Administrator Stephen Johnson, and National Oceanic and Atmospheric Administration (NOAA) Administrator Vice

  11. Sec. Herrington Leads Delegation in Response to Chernobyl Accident...

    National Nuclear Security Administration (NNSA)

    Photo Gallery Jobs Apply for Our Jobs Our Jobs Working at NNSA Blog Home About Us Our History NNSA Timeline Sec. Herrington Leads Delegation in Response to ... Sec....

  12. Combined Heat and Power System Enables 100% Reliability at Leading...

    Office of Environmental Management (EM)

    - Case Study, 2013 Combined Heat and Power System Enables 100% Reliability at Leading ... uninterrupted energy services to TECO customers in the event of a prolonged grid outage. ...

  13. Lasing in robust cesium lead halide perovskite nanowires (Journal...

    Office of Scientific and Technical Information (OSTI)

    Title: Lasing in robust cesium lead halide perovskite nanowires Authors: Eaton, Samuel W. ; Lai, Minliang ; Gibson, Natalie A. ; Wong, Andrew B. ; Dou, Letian ; Ma, Jie ; Wang, ...

  14. EM Leads Successful Workshop Supporting Fukushima Cleanup | Department...

    Broader source: Energy.gov (indexed) [DOE]

    officials leading the cleanup of the Fukushima Daiichi Nuclear Power Plant site and surrounding area, this time addressing priorities identified by Japan's government agencies. ...

  15. West Africa Emerges as Leading Region in Africa for Renewable...

    Open Energy Info (EERE)

    West Africa Emerges as Leading Region in Africa for Renewable Energy and Energy Efficiency Home > Groups > Clean and Renewable Energy Dc's picture Submitted by Dc(266) Contributor...

  16. Solar Test Facility Upgrades Complete, Leading to Better Sandia...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Test Facility Upgrades Complete, Leading to Better Sandia Capabilities to Support Power ... Applications National Solar Thermal Test Facility Nuclear Energy Systems ...

  17. Establishment of the Heavy Isotopes Lead Materials Management...

    Office of Scientific and Technical Information (OSTI)

    Materials Management Organization (LMMO) Citation Details In-Document Search Title: Establishment of the Heavy Isotopes Lead Materials Management Organization (LMMO) Authors: ...

  18. Moderate Doping Leads to High Performance of Semiconductor/Insulator...

    Office of Scientific and Technical Information (OSTI)

    Title: Moderate Doping Leads to High Performance of SemiconductorInsulator Polymer Blend Transistors Authors: Lu, Guanghao ; Blakesley, James ; Himmelberger, Scott ; Pingel, ...

  19. Mainzer taps Gendron, Ehli to lead Power and Corporate Strategy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mainzer-taps-Gendron-Ehli-to-lead-Power-and-Corporate-Strategy Sign In About | Careers | Contact | Investors | bpa.gov Search News & Us Expand News & Us Projects & Initiatives...

  20. Method of manufacturing lead electrodes for storage cells

    DOE Patents [OSTI]

    Jonville, P.; Stoehr, H.; Beccu, K.D.

    1975-09-23

    A method of manufacturing electrodes for lead storage batteries is described. Molten lead or lead alloy is deposited on a felt of glass fibers by spraying in a molten state to fill the space between the fibers of the felt to form an electrically conductive zone defining electrode contacts. A mass of powdered lead-based material is introduced into the felt by filtration for subsequently producing an active electrode mass by at least one electrochemical transformation. The felt is then cut into individual electrodes. (auth)

  1. Nano Design Works: Industry's contact for emerging tech, leading...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Works: Industry's contact for emerging tech, leading tools, and experts Argonne's Nano Design Works gives companies and entrepreneurs the solutions that enable technological ...

  2. Research Led by Sandia Reveals Leading-Edge Erosion Significantly...

    Broader source: Energy.gov (indexed) [DOE]

    Laboratories revealed that leading-edge erosion on wind turbine blades can have a detrimental effect on wind turbine aerodynamic performance within the second year of operation. ...

  3. Indonesia-Low Emissions Asian Development (LEAD) Program | Open...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  4. Thailand-Low Emissions Asian Development (LEAD) Program | Open...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  5. Philippines-Low Emissions Asian Development (LEAD) Program |...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  6. Papua New Guinea-Low Emissions Asian Development (LEAD) Program...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  7. India-Low Emissions Asian Development (LEAD) Program | Open Energy...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  8. Cambodia-Low Emissions Asian Development (LEAD) Program | Open...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  9. Bangladesh-Low Emissions Asian Development (LEAD) Program | Open...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  10. Vietnam-Low Emissions Asian Development (LEAD) Program | Open...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  11. Malaysia-Low Emissions Asian Development (LEAD) Program | Open...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  12. Nepal-Low Emissions Asian Development (LEAD) Program | Open Energy...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  13. Laos-Low Emissions Asian Development (LEAD) Program | Open Energy...

    Open Energy Info (EERE)

    the growth of greenhouse gas emissions. The LEAD program supports and enhances country-led development programs, plans, and policies, and complements efforts of other...

  14. Surface Plasmon Instability Leading to Emission of Radiation...

    Office of Scientific and Technical Information (OSTI)

    Title: Surface Plasmon Instability Leading to Emission of Radiation. Abstract not provided. Authors: Gumbs, Godfrey ; Iurov, Andrii ; Huang, Danhong ; Pan, Wei Publication Date: ...

  15. Lead Research and Development Activity for High Temperature,...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Temperature, Low Relative Humidity Membrane Program Lead Research and Development Activity for High Temperature, Low Relative Humidity Membrane Program A presentation to the High ...

  16. Ames Laboratory to Lead New Research Effort to Address Shortages...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ames Laboratory to Lead New Research Effort to Address Shortages in Rare Earth and Other ... These critical materials, including many rare earth elements, are essential for ...

  17. Testing your home for lead in paint, dust, and soil

    SciTech Connect (OSTI)

    1998-10-01

    This publication is for anyone who is considering having a home or residence tested for lead in paint, dust, or soil by a professional. It explains the technical aspects of lead testing without overwhelming the reader. The first section tells why you would test for lead, the approaches for testing for lead, and what information you will get from each approach. The second section answers specific questions about how paint, soil, and dust sampling are conducted by the professional in your home. Finally, the last section answers other questions about testing, including questions about home test kits and testing of water and ceramics.

  18. Westinghouse Selects Bill Keeley To Lead Strategic Planning and...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    TRU Solutions LLC (WTS) has appointed Bill Keeley to lead the integrated functions of Strategic Planning and Communication at the Waste Isolation Pilot Plant (WIPP). WTS is the...

  19. Robert C. Seamans, Jr. Appointed to Lead Nuclear Weapons Program...

    National Nuclear Security Administration (NNSA)

    C. Seamans, Jr. Appointed to Lead Nuclear Weapons Program | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile...

  20. Solar Decathlon 2015: Nation's Leading Sustainable Home Design...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Decathlon 2015: Nation's Leading Sustainable Home Design Competition on the Horizon Solar ... Richard King Richard King Director, Solar Decathlon KEY FACTS 2015 Solar Decathlon to kick ...

  1. Deputy Secretary of Energy Reviews Leading Nuclear Counterterrorism...

    National Nuclear Security Administration (NNSA)

    Deputy Secretary of Energy Reviews Leading Nuclear Counterterrorism Assets at Andrews Air Force Base September 09, 2009 WASHINGTON, D.C. - Deputy Secretary of Energy Daniel Poneman ...

  2. Fatigue of extracted lead zirconate titanate multilayer actuators...

    Office of Scientific and Technical Information (OSTI)

    Testing of large prototype lead zirconate titanate (PZT) stacks presents substantial technical challenges to electronic testing systems, so an alternative approach that uses ...

  3. University Teams Lead Innovative Solar Research Projects | Department...

    Office of Environmental Management (EM)

    University Teams Lead Innovative Solar Research Projects August 28, 2012 - 2:55pm Addthis A concentrating solar power system in Albuquerque, New Mexico. | Photo by Randy Montoya...

  4. NNSA Computers Lead Global List | National Nuclear Security Administra...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Computers Lead Global List | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering...

  5. DOE specification: Flooded-type lead-acid storage batteries

    SciTech Connect (OSTI)

    1996-08-01

    This document contains a ``fill-in-the-blanks`` guide specification for procurement of flooded-type lead-acid storage batteries, for uninterruptible power supply applications.

  6. Y-12 leads the way in specialized machining

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    leads the way in specialized machining The original nine major buildings at Y-12, five "Alpha" buildings and four "Beta" buildings were originally built to house calutrons to...

  7. NREL Names New Executives to Lead Bioenergy, Bioscience and Energy...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Names New Executives to Lead Bioenergy, Bioscience and Energy Systems Integration Facility ... NREL has named Tom Foust, a nine-year NREL veteran, as its National Bioenergy Center ...

  8. Data, Feedback, & Awareness Lead to Big Energy Savings

    Broader source: Energy.gov (indexed) [DOE]

    Data, Feedback, & Awareness Lead to Big Energy Savings The Navy Region Southwest Metro San ... organized energy awareness program centered on energy data gathering and distribution. ...

  9. Vapor cooled current lead for cryogenic electrical equipment

    DOE Patents [OSTI]

    Vansant, James H.

    1983-01-01

    Apparatus and method are provided for conducting electric current to cryogenic electrical equipment devices. A combination of inner and outer tubes together form a plurality of hollow composite tubes housed in a sheath. Top and bottom block mounting means are fitted to hold the composite tubes and are affixed to the ends of the sheath. This combination forms a current lead. The current lead is attached to a cryogenic device housing a fluid coolant which moves through the current lead, cooling the current lead as the fluid travels.

  10. Ames Laboratory to lead new consortium to advance refrigeration...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratory to lead new consortium to advance refrigeration technology Ames Laboratory will ... friendly and energy-efficient refrigeration technologies, sponsored by DOE's ...

  11. Johney Green to Lead NREL Mechanical and Thermal Systems Engineering...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Johney Green to Lead NREL Mechanical and Thermal Systems Engineering Research August 11, 2016 Photo of Johney Green Photo of Johney Green The Energy Department's National Renewable ...

  12. NREL Highlights Leading Utility Green Power Programs - News Releases...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL Highlights Leading Utility Green Power Programs March 4, 2004 Golden, Colo. - The U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) today released ...

  13. NREL Ranks Leading Utility Green Power Programs - News Releases...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL Ranks Leading Utility Green Power Programs Pricing programs give consumers clean power choices April 3, 2007 The U.S. Department of Energy's (DOE) National Renewable Energy ...

  14. Johney Green to Lead NREL Mechanical and Thermal Systems Engineering...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Johney Green to Lead NREL Mechanical and Thermal Systems Engineering Research August 11, 2016 The Energy Department's National Renewable Energy Laboratory (NREL) has named Dr. ...

  15. Towards a deep understanding of malware propagation in online social networks

    SciTech Connect (OSTI)

    Yan, Guanhua; Eidenbenz, Stephan; Chen, Guanling; Li, Nan

    2009-01-01

    Online social networks, which have been expanding at a blistering speed in the recent years, have emerged as a popular communication infrastructure for Internet users. Meanwhile, malware that specifically targets these online social networks are also on the rise. In this work, we aim to investigate the characteristics of malware propagation in online social networks. Our study is based on a dataset collected from a real-world location-based online social network. We analyze the social structure and user activity patterns of this network. We further use extensive trace-driven simulation to study the impact of initial infection, user click probability, social structure, and activity patterns on malware propagation in online social networks. The results from this work has greatly deepened our understanding of the nature of online social network malware and also shed light on how to defend against them effectively.

  16. New Online Tool Creates One-Stop Shop for Federal Program Opportunities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    That Support Tribal Energy Development | Department of Energy Online Tool Creates One-Stop Shop for Federal Program Opportunities That Support Tribal Energy Development New Online Tool Creates One-Stop Shop for Federal Program Opportunities That Support Tribal Energy Development December 3, 2014 - 9:03am Addthis Today the White House Council on Native American Affairs Energy Subgroup launched a new Federal Grant, Loan, and Technical Assistance Programs for Tribal Energy Development online

  17. Online Travel Reservations through "Concur Travel" | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Online Learning Center Online Learning Center Online Learning Center Whether you're looking to discover new learning opportunities, better manage your career, request external training or connect your employees with the learning they need, OLC provides new features and services to help. Fulfill your training needs with ease and save money on travel and training costs Explore the enhanced catalog and complete a course at your own pace to stay abreast in the latest technology, science

  18. On-Line Tool to Boost Implementation of Energy Sector Roadmap for Control

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Systems | Department of Energy On-Line Tool to Boost Implementation of Energy Sector Roadmap for Control Systems On-Line Tool to Boost Implementation of Energy Sector Roadmap for Control Systems News Release: Implementating the Roadmap to Secure Control Systems in the Energy Sector On-Line Tool to Boost Implementation of Energy Sector Roadmap for Control Systems (29.1 KB) More Documents & Publications Roadmap to Secure Control Systems in the Energy Sector 2006 - Presentation to the 2008

  19. Shoosing the appropriate size wind turbine

    SciTech Connect (OSTI)

    Lynette, R.

    1996-12-31

    Within the past several years, wind turbines rated at 400 kW and higher have been introduced into the market, and some manufacturers are developing machines rated at 750 - 1,000+ kW. This raises the question: What is the appropriate size for utility-grade wind turbines today? The answer depends upon the site where the machines will be used and the local conditions. The issues discussed in the paper are: (1) Site-Related (a) Visual, noise, erosion, television interference, interference with aviation (b) Siting efficiency (2) Logistics (a) Adequacy of roads and bridges to accept large vehicles (b) Availability and cost of cranes for erection and maintenance (c) Capability of local repair/overhauls (3) Cost Effectiveness (a) Capital costs (1) Wind Turbine (2) Infrastructure costs (b) Maintenance costs (4) Technical/Financial Risk. 1 fig., 1 tab.

  20. New program sizes pressure-relief drums

    SciTech Connect (OSTI)

    Durand, A.A.; Osorio, R.A.; Suarez, R.H.

    1996-05-06

    In accordance with API Recommended Practice 521, a new procedure has been developed for the design of relief drums. The calculation method determines by convergence the most economical length-to-diameter ratio for gas-liquid separation vessels. Drum sizing is based on the separation of a two-phase stream, taking into account the special condition of intermittent flow. Design parameters such as settling velocity and residence time also must be calculated to determine an optimum design. A new program based on a programmable algorithm can be converted from basic language to any other computer language to facilitate vessel-design computations. The program quickly and efficiently computes design values for relief systems used in refineries and petrochemical plants.

  1. High Temperature Transducers for Online Monitoring of Microstructure Evolution

    SciTech Connect (OSTI)

    Lissenden, Cliff; Tittmann, Bernhard

    2015-03-30

    A critical technology gap exists relative to online condition monitoring (CM) of advanced nuclear plant components for damage accumulation; there are not capable sensors and infrastructure available for the high temperature environment. The sensory system, monitoring methodology, data acquisition, and damage characterization algorithm that comprise a CM system are investigated here. Thus this work supports the DOE mission to develop a fundamental understanding of advanced sensors to improve physical measurement accuracy and reduce uncertainty. The research involves a concept viability assessment, a detailed technology gap analysis, and a technology development roadmap.

  2. Impact of aerosol size representation on modeling aerosol-cloud interactions: AEROSOL SIZE REPRESENTATION

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhang, Y.; Easter, R. C.; Ghan, S. J.; Abdul-Razzak, H.

    2002-11-07

    We use a 1-D version of a climate-aerosol-chemistry model with both modal and sectional aerosol size representations to evaluate the impact of aerosol size representation on modeling aerosol-cloud interactions in shallow stratiform clouds observed during the 2nd Aerosol Characterization Experiment. Both the modal (with prognostic aerosol number and mass or prognostic aerosol number, surface area and mass, referred to as the Modal-NM and Modal-NSM) and the sectional approaches (with 12 and 36 sections) predict total number and mass for interstitial and activated particles that are generally within several percent of references from a high resolution 108-section approach. The modal approachmore » with prognostic aerosol mass but diagnostic number (referred to as the Modal-M) cannot accurately predict the total particle number and surface areas, with deviations from the references ranging from 7-161%. The particle size distributions are sensitive to size representations, with normalized absolute differences of up to 12% and 37% for the 36- and 12-section approaches, and 30%, 39%, and 179% for the Modal-NSM, Modal-NM, and Modal-M, respectively. For the Modal-NSM and Modal-NM, differences from the references are primarily due to the inherent assumptions and limitations of the modal approach. In particular, they cannot resolve the abrupt size transition between the interstitial and activated aerosol fractions. For the 12- and 36-section approaches, differences are largely due to limitations of the parameterized activation for non-log-normal size distributions, plus the coarse resolution for the 12-section case. Differences are larger both with higher aerosol (i.e., less complete activation) and higher SO2 concentrations (i.e., greater modification of the initial aerosol distribution).« less

  3. Save Paper (and Headaches) with the Loan Program's New Online Application

    Broader source: Energy.gov [DOE]

    The Department’s Loan Program Office announced the launch of its new online application portal, which will help reduce paper consumption and expedite the application process.

  4. On-Line User Survey Form to provide feedback for the DOE Occupational...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    User Survey Form to provide feedback for the DOE Occupational Radiation Exposure Report On-Line User Survey Form to provide feedback for the DOE Occupational Radiation Exposure...

  5. Capillary electrophoresis-fluorescence line narrowing system (CE-FLNS) for on-line structural characterization

    DOE Patents [OSTI]

    Jankowiak, R.J.; Small, G.J.; Shields, P.A.

    1999-04-27

    Capillary electrophoresis (CE) is interfaced with low temperature fluorescence line-narrowing (FLN) spectroscopy for on-line structural characterization of separated molecular analytes. 21 figs.

  6. Capillary electrophoresis-fluorescence line narrowing system (CE-FLNS) for on-line structural characterization

    DOE Patents [OSTI]

    Jankowiak, Ryszard J.; Small, Gerald J.; Shields, Peter A.

    1999-04-27

    Capillary electrophoresis (CE) is interfaced with low temperature fluorescence line-narrowing (FLN) spectroscopy for on-line structural characterization of separated molecular analytes.

  7. Pore size distribution and accessible pore size distribution in bituminous coals

    SciTech Connect (OSTI)

    Sakurovs, Richard; He, Lilin; Melnichenko, Yuri B; Radlinski, Andrzej Pawell; Blach, Tomasz P

    2012-01-01

    The porosity and pore size distribution of coals determine many of their properties, from gas release to their behavior on carbonization, and yet most methods of determining pore size distribution can only examine a restricted size range. Even then, only accessible pores can be investigated with these methods. Small-angle neutron scattering (SANS) and ultra small-angle neutron scattering (USANS) are increasingly used to characterize the size distribution of all of the pores non-destructively. Here we have used USANS/SANS to examine 24 well-characterized bituminous and subbituminous coals: three from the eastern US, two from Poland, one from New Zealand and the rest from the Sydney and Bowen Basins in Eastern Australia, and determined the relationships of the scattering intensity corresponding to different pore sizes with other coal properties. The range of pore radii examinable with these techniques is 2.5 nm to 7 {micro}m. We confirm that there is a wide range of pore sizes in coal. The pore size distribution was found to be strongly affected by both rank and type (expressed as either hydrogen or vitrinite content) in the size range 250 nm to 7 {micro}m and 5 to 10 nm, but weakly in intermediate regions. The results suggest that different mechanisms control coal porosity on different scales. Contrast-matching USANS and SANS were also used to determine the size distribution of the fraction of the pores in these coals that are inaccessible to deuterated methane, CD{sub 4}, at ambient temperature. In some coals most of the small ({approx} 10 nm) pores were found to be inaccessible to CD{sub 4} on the time scale of the measurement ({approx} 30 min - 16 h). This inaccessibility suggests that in these coals a considerable fraction of inherent methane may be trapped for extended periods of time, thus reducing the effectiveness of methane release from (or sorption by) these coals. Although the number of small pores was less in higher rank coals, the fraction of total

  8. Water supplier copes with lead paint removal regs

    SciTech Connect (OSTI)

    Becker, C.E. ); Lovejoy, D.R.; Bryck, J.L.; Rockensies, W.H.

    1993-12-01

    This article examines new paint removal methods that minimize releasing of paints containing lead to the environment and lead free coating systems for tank corrosion protection used in the Village of Freeport in Long Island, New York. The topics of the article include coating failures, removal tools and methods, paint and application methods.

  9. On-line instrumentation for the real-time monitoring of polynuclear aromatic hydrocarbons in the effluents from a fluidized bed combustor - a feasibility study

    SciTech Connect (OSTI)

    D'Silva, A.P.; Iles, M.; Rice, G.; Fassel, V.A.

    1984-04-01

    When polynuclear aromatic hydrocargons in the vapor phase are diluted preferably in a rare gas and undergo supersonic jet expansion, rotationally cooled molecules with absorption bandwidths of the order of 0.01 nm (FWHM) are obtained. Selective excitation with a tunable dye laser into such narrow absorption bands leads to the observation of highly specific luminescence spectra. Such an approach has been utilized for the on-line, real-time monitoring of polynuclear aromatic hydrocarbons in the effluents from a fluidized bed combustor.

  10. Method for fabricating fan-fold shielded electrical leads

    DOE Patents [OSTI]

    Rohatgi, Rajeev R.; Cowan, Thomas E.

    1994-01-01

    Fan-folded electrical leads made from copper cladded Kapton, for example, with the copper cladding on one side serving as a ground plane and the copper cladding on the other side being etched to form the leads. The Kapton is fan folded with the leads located at the bottom of the fan-folds. Electrical connections are made by partially opening the folds of the fan and soldering, for example, the connections directly to the ground plane and/or the lead. The fan folded arrangement produces a number of advantages, such as electrically shielding the leads from the environment, is totally non-magnetic, and has a very low thermal conductivity, while being easy to fabricate.

  11. Method for fabricating fan-fold shielded electrical leads

    DOE Patents [OSTI]

    Rohatgi, R.R.; Cowan, T.E.

    1994-12-27

    Fan-folded electrical leads made from copper cladded Kapton, for example, with the copper cladding on one side serving as a ground plane and the copper cladding on the other side being etched to form the leads. The Kapton is fan folded with the leads located at the bottom of the fan-folds. Electrical connections are made by partially opening the folds of the fan and soldering, for example, the connections directly to the ground plane and/or the lead. The fan folded arrangement produces a number of advantages, such as electrically shielding the leads from the environment, is totally non-magnetic, and has a very low thermal conductivity, while being easy to fabricate. 3 figures.

  12. A new XRF method for measuring lead in paint

    SciTech Connect (OSTI)

    Grodzins, L.; Parsons, C.; Sackett, D.; Shefsky, S.; Tannian, B.

    1995-12-31

    The traditional field testing method for lead paint is the use of x-ray fluorescence, where the K shell fluorescence x-rays of lead (at 73 and 75 MeV) are measured. Although the K shell method can suffer from substrate effects and hence low sensitivity around the action level of 1 mg/cm{sup 2} of lead, it has been the industry choice because the effects of the overlying paint matrix on the K-shell x-rays are negligible. L shell x-rays of lead, at L{sub {alpha}} = 10.5 keV and L{sub {beta}} = 12.6 keV, provide much greater sensitivity and are free of substrate effects, but corrections for the absorption of the L-shell x-rays by the overlying non-lead paint matrix must be made. Such corrections were thought to be impossible without knowledge of the composition and thickness of the overlying paint matrix. NITON has developed a new method that makes it possible to use L-shell x-rays to accurately and quickly determine the absolute concentration of lead in buried lead paint (in mg/cm{sup 2}) without knowledge of the composition or thickness of the layers overlying the lead. The invention makes use of the fact that the ratio of the mass attenuation coefficients for the L{sub {alpha}} at 10.5 keV to the L{sub {beta}} at 12.6 keV is effectively independent of the elemental composition of paint layers. The new method also gives a measure of the depth of the lead beneath the surface. Theory and confirming experimental data will be presented. The authors will describe the NITON XL, a portable XRF device which uses the invention to give the lead concentration and its depth beneath the surface of paint.

  13. Pulsed Neurton Elemental On-Line Material Analyzer

    DOE Patents [OSTI]

    Vourvopoulos, George

    2002-08-20

    An on-line material analyzer which utilizes pulsed neutron generation in order to determine the composition of material flowing through the apparatus. The on-line elemental material analyzer is based on a pulsed neutron generator. The elements in the material interact with the fast and thermal neutrons produced from the pulsed generator. Spectra of gamma-rays produced from fast neutrons interacting with elements of the material are analyzed and stored separately from spectra produced from thermal neutron reactions. Measurements of neutron activation takes place separately from the above reactions and at a distance from the neutron generator. A primary passageway allows the material to flow through at a constant rate of speed and operators to provide data corresponding to fast and thermal neutron reactions. A secondary passageway meters the material to allow for neutron activation analysis. The apparatus also has the capability to determine the density of the flowed material. Finally, the apparatus continually utilizes a neutron detector in order to normalize the yield of the gamma ray detectors and thereby automatically calibrates and adjusts the spectra data for fluctuations in neutron generation.

  14. Polar On-Line Acquisition Relay and Transmission System (POLARATS)

    SciTech Connect (OSTI)

    Yuracko, K.

    2004-07-15

    POLARATS (Polar On-Line Acquisition Relay And Transmission System) is being developed by YAHSGS LLC (YAHSGS) and Oak Ridge National Laboratory (ORNL) to provide remote, unattended monitoring of environmental parameters under harsh environmental conditions. In particular, instrumental design and engineering is oriented towards protection of human health in the Arctic, and with the additional goal of advancing Arctic education and research. POLARATS will obtain and transmit environmental data from hardened monitoring devices deployed in locations important to understanding atmospheric and aquatic pollutant migration as it is biomagnified in Arctic food chains. An Internet- and personal computer (PC)-based educational module will provide real time sensor data, on-line educational content, and will be integrated with workbooks and textbooks for use in middle and high school science programs. The educational elements of POLARATS include an Internet-based educational module that will instruct students in the use of the data and how those data fit into changing Arctic environments and food chains. POLARATS will: (1) Enable students, members of the community, and scientific researchers to monitor local environmental conditions in real time over the Internet; and (2) Provide additional educational benefits through integration with middle- and high-school science curricula. Information will be relayed from POLARATS devices to classrooms and libraries along with custom-designed POLARATS teaching materials that will be integrated into existing curricula to enhance the educational benefits realized from the information obtained.

  15. INTERIM REPORT ON CONCRETE DEGRADATION MECHANISMS AND ONLINE MONITORING TECHNIQUES

    SciTech Connect (OSTI)

    Mahadevan, Sankaran; Agarwal, Vivek; Neal, Kyle; Kosson, David; Adams, Douglas

    2014-09-01

    The existing fleets of nuclear power plants in the United States have initial operating licenses of 40 years, though most these plants have applied for and received license extensions. As plant structures, systems, and components age, their useful life—considering both structural integrity and performance—is reduced as a result of deterioration of the materials. The online monitoring of concrete structure conducted under the Advanced Instrumentation, Information, and Control Technologies Pathway of the Light Water Reactor Sustainability program at Idaho National Laboratory will develop and demonstrate concrete structures health monitoring capabilities. Assessment and management of aging concrete structures in nuclear plants require a more systematic approach than simple reliance on existing code margins of safety. Therefore, the structural health monitoring is required to produce actionable information regarding structural integrity that supports operational and maintenance decisions. Through this research project, several national laboratories and Vanderbilt University proposes to develop a framework of research activities for the health monitoring of nuclear power plant concrete structures that includes integration of four elements—damage modeling, monitoring, data analytics, and uncertainty quantification. This report briefly discusses available techniques and ongoing challenges in each of the four elements of the proposed framework with emphasis on degradation mechanisms and online monitoring techniques.

  16. SU-E-P-09: Radiation Transmission Measurements and Evaluation of Diagnostic Lead-Based and Lead-Free Aprons

    SciTech Connect (OSTI)

    Syh, J

    2014-06-01

    Purpose: This study was conducted to ensure that various lead shield apron manufacturers provided accurate attenuation factors regardless of whether the apron was made of lead-based or lead-free equivalent material. Methods: A calibrated ionization survey meter was placed at chest height and 36 cm horizontally away from a solid water phantom on a simulator couch. Measurements were done with or without apron. Radiation field was set to 24cmx24cm with the phantom at 100cm source-to-surface distance. Irradiation time was set for 1 minute at voltages of 60, 80, 100 and 120 kVp. Current was set at 6mA. Results: Between 60 kVp and 120 kVp, the transmission through 0.50 mm of lead-based apron was between 1.0% and 6.5% with a mean value of 3.2% and a standard deviation (s.d.) of 1.4%. The transmissions through the 0.50 mm lead-free aprons were 1.0 % to 12.0% with a mean value of 6.1% and s.d. of 2.6%. At 120 kVp, the transmission value was 6.5% for 0.50 mm lead-based apron and 11.1% to 12.0% for 0.50 mm lead-free aprons. The radiation transmissions at 80 kVp, measured in two different 0.5 mm lead-free aprons, were 4.3% each. However, only 1.4% transmission was found through the lead-based apron. Overall, the radiation transmitted through the lead-based apron was 1/3 transmission of lead-free at 80kVp, and half value of lead-free aprons at 100 and 120 kVp. Conclusion: Even though lead-based and lead-free aprons all claimed to have the same lead equivalent thickness, the transmission might not be the same. The precaution was needed to exercise diligence in quality assurance program to assure adequate protection to staff who wear it during diagnostic procedures. The requirement for aprons not only should be in certain thickness to meet state regulation but also to keep reasonably achievable low exposure with the accurate labeling from manufacturers.

  17. Ultrashort laser ablation of bulk copper targets: Dynamics and size distribution of the generated nanoparticles

    SciTech Connect (OSTI)

    Tsakiris, N.; Gill-Comeau, M.; Lewis, L. J.; Anoop, K. K.; Ausanio, G.; Bruzzese, R.; Amoruso, S.

    2014-06-28

    We address the role of laser pulse fluence on expansion dynamics and size distribution of the nanoparticles produced by irradiating a metallic target with an ultrashort laser pulse in a vacuum, an issue for which contrasting indications are present in the literature. To this end, we have carried out a combined theoretical and experimental analysis of laser ablation of a bulk copper target with ≈50 fs, 800 nm pulses, in an interval of laser fluencies going from few to several times the ablation threshold. On one side, molecular dynamics simulations, with two-temperature model, describe the decomposition of the material through the analysis of the evolution of thermodynamic trajectories in the material phase diagram, and allow estimating the size distribution of the generated nano-aggregates. On the other side, atomic force microscopy of less than one layer nanoparticles deposits on witness plates, and fast imaging of the nanoparticles broadband optical emission provide the corresponding experimental characterization. Both experimental and numerical findings agree on a size distribution characterized by a significant fraction (≈90%) of small nanoparticles, and a residual part (≈10%) spanning over a rather large size interval, evidencing a weak dependence of the nanoparticles sizes on the laser pulse fluence. Numerical and experimental findings show a good degree of consistency, thus suggesting that modeling can realistically support the search for experimental methods leading to an improved control over the generation of nanoparticles by ultrashort laser ablation.

  18. Hot-stage transmission electron microscopy study of (Na, K)NbO{sub 3} based lead-free piezoceramics

    SciTech Connect (OSTI)

    Lu, Shengbo; Xu, Zhengkui; Kwok, K. W.; Chan, Helen L. W.

    2014-07-28

    Hierarchical nanodomains assembled into micron-sized stripe domains, which is believed to be associated with outstanding piezoelectric properties, were observed at room temperature in a typical lead free piezoceramics, (Na{sub 0.52}K{sub 0.48−x})(Nb{sub 0.95−x}Ta{sub 0.05})-xLiSbO{sub 3}, with finely tuned polymorphic phase boundaries (x = 0.0465) by transmission electron microscopy. The evolution of domain morphology and crystal structure under heating and cooling cycles in the ceramic was investigated by in-situ hot stage study. It is found that the nanodomains are irreversibly transformed into micron-sized rectangular domains during heating and cooling cycles, which lead to the thermal instability of piezoelectric properties of the materials.

  19. From medium-sized to megawatt turbines...

    SciTech Connect (OSTI)

    Dongen, W. van

    1996-12-31

    One of the world`s first 500 kW turbines was installed in 1989 in the Netherlands. This forerunner of the current NedWind 500 kW range also represents the earliest predesign of the NedWind megawatt turbine. After the first 500 kW turbines with steel rotor blades and rotor diameter of 34 m, several design modifications followed, e.g. the rotor diameter was increased to 35 m and a tip brake was added. Later polyester blades were introduced and the rotor diameter was increased with 5 in. The drive train was also redesigned. Improvements on the 500 kW turbine concept has resulted in decreased cost, whereas annual energy output has increased to approx. 1.3 million kWh. Wind energy can substantially contribute to electricity supply. Maximum output in kiloWatthours is the target. Further improvement of the existing technology and implementation of flexible components may well prove to be a way to increase energy output, not only in medium or large sized wind turbines. 7 figs.

  20. Anaerobic microbial dissolution of lead and production of organic acids

    DOE Patents [OSTI]

    Francis, A.J.; Dodge, C.; Chendrayan, K.; Quinby, H.L.

    1987-04-16

    The present invention related to an anaerobic bacterial culture of Clostridium sp. ATCC No. 53464 which solubilizes lead oxide under anaerobic conditions in coal and industrial wastes and therefore presents a method of removing lead from such wastes before they are dumped into the environment. The rat of lead dissolution during logarithmic growth of the bacteria in 40 ml medium containing 3.32 ..mu..moles of lead as lead oxide was 0.042 ..mu..moles m1/sup /-/1/ hr/sup /-/1/. Dissolution of lead oxide by the bacterial isolate is due to the production of metabolites and acidity in the culture medium. The major metabolites are acetic, butyric and lactic acid. The major metabolites are acetic, butyric and lactic acid. Clostridium sp. ATCC No. 53464 can be used in the recovery of the strategic metals from ores and wastes and also for the production of lactic acid for commercial purposes. The process yields large quantities of lactic acid as well as lead complexed in a stable form with said acids. 4 figs., 3 tabs.

  1. Anaerobic microbial dissolution of lead and production of organic acids

    DOE Patents [OSTI]

    Francis, Arokiasamy J.; Dodge, Cleveland; Chendrayan, Krishnachetty; Quinby, Helen L.

    1988-01-01

    The present invention relates to an anaerobic bacterial culture of Clostridium sp. ATCC No. 53464 which solubilizes lead oxide under anaerobic conditions in coal and industrial wastes and therefore presents a method of removing lead from such wastes before they are dumped into the environment. The rate of lead dissolution during logarithmic growth of the bacteria in 40 ml medium containing 3.32 .mu.moles of lead as lead oxide was 0.042 .mu.moles ml.sup.-1 hr.sup.-1. Dissolution of lead oxide by the bacterial isolate is due to the production of metabolites and acidity in the culture medium. The major metabolites are acetic, butyric and lactic acid. Clostridium sp. ATCC No. 53464 can be used in the recovery of strategic metals from ores and wastes and also for the production of lactic acid for commercial purposes. The process yields large quantities of lactic acid as well as lead complexed in a stable form with said acids.

  2. Numerical Model for Conduction-Cooled Current Lead Heat Loads

    SciTech Connect (OSTI)

    White, M.J.; Wang, X.L.; Brueck, H.D.; /DESY

    2011-06-10

    Current leads are utilized to deliver electrical power from a room temperature junction mounted on the vacuum vessel to a superconducting magnet located within the vacuum space of a cryostat. There are many types of current leads used at laboratories throughout the world; however, conduction-cooled current leads are often chosen for their simplicity and reliability. Conduction-cooled leads have the advantage of using common materials, have no superconducting/normal state transition, and have no boil-off vapor to collect. This paper presents a numerical model for conduction-cooled current lead heat loads. This model takes into account varying material and fluid thermal properties, varying thicknesses along the length of the lead, heat transfer in the circumferential and longitudinal directions, electrical power dissipation, and the effect of thermal intercepts. The model is validated by comparing the numerical model results to ideal cases where analytical equations are valid. In addition, the XFEL (X-Ray Free Electron Laser) prototype current leads are modeled and compared to the experimental results from testing at DESY's XFEL Magnet Test Stand (XMTS) and Cryomodule Test Bench (CMTB).

  3. Investigation of the spatial resolution of an online dose verification device

    SciTech Connect (OSTI)

    Asuni, G.; Rickey, D. W.; McCurdy, B. M. C.

    2012-02-15

    Purpose: The aim of this work is to characterize a new online dose verification device, COMPASS transmission detector array (IBA Dosimetry, Schwarzenbruck, Germany). The array is composed of 1600 cylindrical ionization chambers of 3.8 mm diameter, separated by 6.5 mm center-to-center spacing, in a 40 x 40 arrangement. Methods: The line spread function (LSF) of a single ion chamber in the detector was measured with a narrow slit collimator for a 6 MV photon beam. The 0.25 x 10 mm{sup 2} slit was formed by two machined lead blocks. The LSF was obtained by laterally translating the detector in 0.25 mm steps underneath the slit over a range of 24 mm and taking a measurement at each step. This measurement was validated with Monte Carlo simulation using BEAMnrc and DOSXYZnrc. The presampling modulation transfer function (MTF), the Fourier transform of the line spread function, was determined and compared to calculated (Monte Carlo and analytical) MTFs. Two head-and-neck intensity modulated radiation therapy (IMRT) fields were measured using the device and were used to validate the LSF measurement. These fields were simulated with the BEAMnrc Monte Carlo model, and the Monte Carlo generated incident fluence was convolved with the 2D detector response function (derived from the measured LSF) to obtain calculated dose. The measured and calculated dose distributions were then quantitatively compared using {chi}-comparison criteria of 3% dose difference and 3 mm distance-to-agreement for in-field points (defined as those above the 10% maximum dose threshold). Results: The full width at half-maximum (FWHM) of the measured detector response for a single chamber is 4.3 mm, which is comparable to the chamber diameter of 3.8 mm. The pre-sampling MTF was calculated, and the resolution of one chamber was estimated as 0.25 lp/mm from the first zero crossing. For both examined IMRT fields, the {chi}-comparison between measured and calculated data show good agreement with 95.1% and 96

  4. Zinc halogen battery electrolyte composition with lead additive

    DOE Patents [OSTI]

    Henriksen, Gary L.

    1981-01-01

    This disclosure relates to a zinc halogen battery electrolyte composition containing an additive providing improved zinc-on-zinc recyclability. The improved electrolyte composition involves the use of a lead additive to inhibit undesirable irregular plating and reduce nodular or dendritic growth on the electrode surface. The lead-containing electrolyte composition of the present invention appears to influence not only the morphology of the base plate zinc, but also the morphology of the zinc-on-zinc replate. In addition, such lead-containing electrolyte compositions appear to reduce hydrogen formation.

  5. Department of Energy Recognizes Six Leading Organizations for Helping the

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    U.S. 'Go Green' | Department of Energy Six Leading Organizations for Helping the U.S. 'Go Green' Department of Energy Recognizes Six Leading Organizations for Helping the U.S. 'Go Green' October 22, 2007 - 3:21pm Addthis 2007 National Green Power Supplier Award Winners WASHINGTON, DC - The U.S. Department of Energy (DOE) will recognize six leading organizations at the Seventh Annual Green Power Leadership Awards tonight in Philadelphia for advancing the development and use of "green

  6. SU-E-T-10: A Dosimetric Comparison of Copper to Lead-Alloy Apertures for Electron Beam Therapy

    SciTech Connect (OSTI)

    Rusk, B; Hogstrom, K; Gibbons, J; Carver, R

    2014-06-01

    Purpose: To evaluate dosimetric differences of copper compared to conventional lead-alloy apertures for electron beam therapy. Methods: Copper apertures were manufactured by .decimal, Inc. and matching lead-alloy, Cerrobend, apertures were constructed for 32 square field sizes (2×2 – 20×20 cm{sup 2}) for five applicator sizes (6×6–25×25 cm{sup 2}). Percent depth-dose and off-axis-dose profiles were measured using an electron diode in water with copper and Cerrobend apertures for a subset of aperture sizes (6×6, 10×10, 25×25 cm{sup 2}) and energies (6, 12, 20 MeV). Dose outputs were measured for all field size-aperture combinations and available energies (6–20 MeV). Measurements were taken at 100 and 110 cm SSDs. Using this data, 2D planar absolute dose distributions were constructed and compared. Passing criteria were ±2% of maximum dose or 1-mm distance-to-agreement for 99% of points. Results: A gamma analysis of the beam dosimetry showed 93 of 96 aperture size, applicator, energy, and SSD combinations passed the 2%/1mm criteria. Failures were found for small field size-large applicator combinations at 20 MeV and 100-cm SSD. Copper apertures showed a decrease in bremsstrahlung production due to copper's lower atomic number compared to Cerrobend (greatest difference was 2.5% at 20 MeV). This effect was most prominent at the highest energies with large amounts of shielding material present (small field size-large applicator). Also, an increase in electrons scattered from the collimator edge of copper compared to Cerrobend resulted in an increased dose at the field edge for copper at shallow depths (greatest increase was 1% at 20 MeV). Conclusion: Apertures for field sizes ≥6×6 cm{sup 2} at any energy, or for small fields (≤4×4 cm{sup 2}) at energies <20 MeV, showed dosimetric differences less than 2%/1mm for more than 99% of points. All field size-applicator size-energy combinations passed 3%/1mm criteria for 100% of points. Work partially funded

  7. Global Nuclear Energy Partnership Triples in Size to 16 Members...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Global Nuclear Energy Partnership Triples in Size to 16 Members Global Nuclear Energy Partnership Triples in Size to 16 Members September 16, 2007 - 2:33pm Addthis Nations Sign On...

  8. Solar Trackers Market Size | OpenEI Community

    Open Energy Info (EERE)

    Solar Trackers Market Size Home John55364's picture Submitted by John55364(100) Contributor 12 May, 2015 - 03:54 Solar Trackers Market - Global Industry Analysis, Size, Share,...

  9. Stabilization/solidification of battery debris & lead impacted material at Schuylkill Metals, Plant City, Florida

    SciTech Connect (OSTI)

    Anguiano, T.; Floyd, D.

    1997-12-31

    The Schuylkill Metals facility in Plant City Florida (SMPCI) operated as a battery recycling facility for approximately 13 years. During its operation, the facility disposed of battery components in surrounding wetland areas. In March of 1991 the U.S. EPA and SMPCI entered into a Consent Decree for the remediation of the SMPCI site using stabilization/solidification and on-site disposal. In November of 1994, ENTACT began remediation at the facility and to date has successfully stabilized/solidified over 228,000 tons of lead impacted battery components and lead impacted material. The ENTACT process reduces the size of the material to be treated to ensure that complete mixing of the phosphate/cement additive is achieved thereby promoting the chemical reactions of stabilization and solidification. ENTACT has met the following performance criteria for treated material at the SMPCI site: (1) Hydraulic Conductivity less than 1x10{sup -6} cm/s, (2) Unconfined Compressive Strength greater than 50 psi, (3) Lead, Cadmium, Arsenic, Chromium TCLP Leachability below hazardous levels.

  10. President Obama to Honor Nation's Leading Scientists and Innovators...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    President Obama to Honor Nation's Leading Scientists and Innovators January 22, 2016 - 10:59am Addthis Original content from Whitehouse.gov The White House announced the latest ...

  11. NATIONAL LEAD COMPANY OF OHIO HEALTH AND SAFETY DIVISION - ANALYTICAL...

    Office of Legacy Management (LM)

    J &' fi -35-24 saps RUSH NATIONAL LEAD COMPANY OF OHIO HEALTH AND SAFETY DIVISION - ANALYTICAL DEPT. ANALYTICAL DATA SHEET ULO-n&s-736 (REV. 8u591 -----" . . . , -.-.-- ....

  12. Leading Edge Erosion Phase II Wind Tunnel Test Begins

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Wind tunnel testing is commencing for the second phase of the leading edge erosion project, which is a collaboration between Texas A&M, UC Davis, and Sandia. During the 2012 fiscal ...

  13. Method and apparatus for diagnosis of lead toxicity

    DOE Patents [OSTI]

    Rosen, John F.; Slatkin, Daniel N.; Wielopolski, Lucian

    1989-01-01

    Improved methods and apparatus for in vivo measurement of the skeletal lead burden of a patient and for diagnosis of lead toxicity are disclosed. The apparatus comprises an x-ray tube emitting soft low energy x-rays from a silver anode, a polarizer for polarizing the emitted x-rays, and a detector for detecting photons fluoresced from atoms in the patient's tibia upon irradiation by the polarized x-rays. The fluoresced photons are spectrally analyzed to determine their energy distribution. Peaks indicating the presence of lead are identified if the patient has relatively high bone lead content. The data may be compared to data recorded with respect to a similar test performed on patients having also had the conventional EDTA chelation tests performed thereon in order to correlate the test results with respect to a particular patient to the conventionally accepted EDTA chelation test.

  14. Lab Discovery: Water Leads to Chemical that "Gunks Up" Biofuels...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lab Discovery: Water Leads to Chemical that "Gunks Up" Biofuels Production November 20, 2014 - 12:16pm Addthis In this episode of 90 Seconds of Discovery, Catalysis Scientist ...

  15. Leading the Charge: Jana Ganion Advances Blue Lake Rancheria...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... We just received initial Notice of Proposed Award for a 500-kW ground-mounted solar array with a grid storage battery system, controlled with leading-edge microgrid technology. If ...

  16. WPN 08-6: Interim Lead-Safe Weatherization Guidance

    Broader source: Energy.gov [DOE]

    To provide additional guidance for an LSW component of a health and safety plan. This guidance builds on the foundation provided in WPN 02-6, Weatherization Activities and Federal Lead Based Paint Regulations.

  17. Eliot Feibush leads new Princeton consortium to visualize Big...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Eliot Feibush leads new Princeton consortium to visualize Big Data By John Greenwald April 22, 2015 Tweet Widget Google Plus One Share on Facebook Eliot Feibush (Photo by Elle ...

  18. Eliot Feibush leads new Princeton consortium to visualize Big...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Eliot Feibush leads new Princeton consortium to visualize Big Data By John Greenwald April 20, 2015 Tweet Widget Google Plus One Share on Facebook Eliot Feibush (Photo by Elle ...

  19. Researchers Achieve Breakthrough in Solving Leading Cause of Gearbox Failures

    Broader source: Energy.gov [DOE]

    Accomplishing a significant milestone, researchers from the U.S. Department of Energy’s Argonne National Laboratory have successfully replicated the leading cause of wind turbine gearbox failures,...

  20. The Source of Airborne Lead: Recycling Pb-Contaminated Soils

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    correspondingly 2,3. Despite this dramatic improvement in both exposure risk and body burden of Pb, the sources and health threat of the low levels of lead in our...

  1. Department of Energy Recognizes Six Leading Organizations for...

    Energy Savers [EERE]

    October 22, 2007 - 3:21pm Addthis 2007 National Green Power Supplier Award Winners WASHINGTON, DC - The U.S. Department of Energy (DOE) will recognize six leading organizations at ...

  2. Method for determining aerosol particle size device for determining aerosol particle size

    DOE Patents [OSTI]

    Novick, Vincent J.

    1998-01-01

    A method for determining the mass median diameter D of particles contained in a fluid is provided wherein the data of the mass of a pre-exposed and then a post-exposed filter is mathematically combined with data concerning the pressure differential across the same filter before and then after exposure to a particle-laden stream. A device for measuring particle size is also provided wherein the device utilizes the above-method for mathematically combining the easily quantifiable data.

  3. Updating about reductions of air and blood lead concentrations in Turin, Italy, following reductions in the lead content of gasoline

    SciTech Connect (OSTI)

    Bono, R.; Pignata, C.; Gilli, G.

    1995-07-01

    Considering its well known toxicity and the chronic human exposure to lead, international lawmakers enforced some directives or laws calling for the reduction of lead content in gasoline. All of these legislative acts aimed to reduce health risks for the general population. The aim of this study was to consider the effectiveness of these laws on air lead levels and consequently on blood lead levels in a randomly selected urban Italian population. In particular, these markers were analyzed over the course of several years, corresponding to the periods just before and after enforcements of the reductions of lead in petrol. Data presented point out some considerations: (1) enforcement of legislative measures concerning the reduction of lead in petrol has reduced atmospheric levels of lead. This result demonstrates a major environmental success in primary prevention efforts. (2) This success is clear especially considering that the actual Pb-B levels can be extended to the urbanized populations. Pb-B levels were consistently higher for drinkers, for older adults and for males. The mean of Pb-B level for the present urbanized population is higher than the U.S. overall population (6.4 vs 3 {mu}g/dl). This difference can be also explained considering the different historical period of enforcement of the restriction laws. 10 refs., 3 figs., 3 tabs.

  4. Volunteers Leading Technology, A Case Study: Chewonki Renewable Hydrogen

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Project | Department of Energy Volunteers Leading Technology, A Case Study: Chewonki Renewable Hydrogen Project Volunteers Leading Technology, A Case Study: Chewonki Renewable Hydrogen Project This presentation by Paul Faulstich focuses on the Chewonki Renewable Hydrogen Project. education_presentation_faulstich.pdf (586.19 KB) More Documents & Publications EIS-0073: Final Environmental Impact Statement EIS-0063: Final Environmental Impact Statement EIS-0063: Draft Environmental Impact

  5. Leads | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    Leads Human Subjects Protection Program (HSPP) HSPP Home About For Researchers For IRB Managers / Administrators For IRB Members For Institutional Officials For Prospective Human Subjects Leads Annual Reports Institutional Review Boards (IRBs) Education and Resources Regulations and Requirements Glossary Abbreviations Contact BER Home Contact Information Human Subjects Protection Program U.S. Department of Energy SC-23/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 About

  6. DOE-Idaho Leads Regional Combined Federal Campaign

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOE NEWS RELEASE DOE-Idaho Leads Regional Combined Federal Campaign FOR IMMEDIATE RELEASE December 5, 2007 Media Contact: Brad Bugger, (208) 526-8484 The U.S. Department of Energy's Idaho Operations Office is once again leading the regional Combined Federal Campaign, which is the only sanctioned charitable campaign for all federal employees. Idaho Operations Office staff evaluates applications from local non-profit organizations who want to be included in the Combined Federal Campaign, to make

  7. WIPP's Mine Rescue Teams Lead Competition | Department of Energy

    Office of Environmental Management (EM)

    WIPP's Mine Rescue Teams Lead Competition WIPP's Mine Rescue Teams Lead Competition July 30, 2013 - 12:00pm Addthis WIPP’s mine rescue team members, back row from left, are NWP President and Project Manager Farok Sharif; Heath Fowler; Manny Marquez; Mat Ridgway; Gary Kessler; Curtis Sanders, III; Jim Pierce; Tony Mihelic; Joe Baca; Justin Bailey; Ty Zimmerly; Fabian Carrasco; Chauncey Ortega; Nico Dominguez; and CBFO Manager Joe Franco. In front are Richard West, team trainer; and Ann

  8. Lead-free Thin Film Piezoelectric Devices - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Vehicles and Fuels Vehicles and Fuels Find More Like This Return to Search Lead-free Thin Film Piezoelectric Devices Lawrence Berkeley National Laboratory Contact LBL About This Technology Technology Marketing SummaryIn a breakthrough discovery, Ramamoorthy Ramesh, Robert Zeches, and their research team at Berkeley Lab have developed a technology for lead-free piezoelectric materials using thin-film bismuth ferrite. In addition to being less hazardous to human health and the environment, the

  9. Secretaries Chu and Salazar Lead Administration Team Offering Federal

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Scientific and Technological Support to BP Engineers | Department of Energy Lead Administration Team Offering Federal Scientific and Technological Support to BP Engineers Secretaries Chu and Salazar Lead Administration Team Offering Federal Scientific and Technological Support to BP Engineers May 12, 2010 - 12:00am Addthis HOUSTON, TX -- At the request of the President, Secretary Chu and Secretary Salazar traveled to Houston today to participate in meetings with DOE and national lab staff,

  10. Richard Gerber Named New NERSC User Services Group Lead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Richard Gerber New NERSC User Services Group Lead Richard Gerber Named New NERSC User Services Group Lead December 12, 2013 RichardGerber.jpg Richard Gerber Richard Gerber has been named leader of the NERSC User Services Group (USG), effective immediately. He takes over for Katie Antypas, who was appointed head of the NERSC Services Department in September. In his new role, Gerber will be responsible for managing a group that works to increase the scientific productivity of NERSC's 4,700 users.

  11. Weerts to lead Physical Sciences and Engineering directorate | Argonne

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Laboratory Weerts to lead Physical Sciences and Engineering directorate By Lynn Tefft Hoff * August 10, 2015 Tweet EmailPrint Hendrik (Harry) Joseph Weerts has been named the associate laboratory director for the Physical Sciences and Engineering (PSE) directorate at the U.S. Department of Energy's Argonne National Laboratory. Weerts has served in the role on an interim basis since May 2014. As part of Argonne's senior management team, Weerts will lead the PSE directorate and its

  12. Solar Decathlon 2015: Nation's Leading Sustainable Home Design

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Competition on the Horizon | Department of Energy Decathlon 2015: Nation's Leading Sustainable Home Design Competition on the Horizon Solar Decathlon 2015: Nation's Leading Sustainable Home Design Competition on the Horizon July 13, 2015 - 2:15pm Addthis The New York City College of Technology is weatherproofing its house, called DURA, at a Brooklyn Navy Yard construction site. | Photo courtesy of New York City College of Technology. The New York City College of Technology is weatherproofing

  13. EM Selects Ralph Holland to Lead Consolidated Business Center | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Selects Ralph Holland to Lead Consolidated Business Center EM Selects Ralph Holland to Lead Consolidated Business Center August 10, 2015 - 2:00pm Addthis Ralph Holland, Environmental Management Consolidated Business Center Ralph Holland, Environmental Management Consolidated Business Center WASHINGTON, D.C. - EM has named Ralph Holland director of the Environmental Management Consolidated Business Center (EMCBC) in Cincinnati. Holland has served in various contracting, supervisory,

  14. Energy recovery experiment could lead way to new accelerators | Jefferson

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lab recovery experiment could lead way to new accelerators One of four BE magnets Corey Butler, mechanical designer; (left to right) Alex Bogacz, CASA staff scientist and experiment co-spokesman; and Robby Hicks, mechanical engineer, stand with one of the four BE magnets and a section of vacuum chamber built by the Machine Shop specifically for the Energy Recovery experiment. Energy recovery experiment could lead way to new accelerators March 6, 2003 Jefferson Lab physicists will soon begin

  15. President Obama to Honor Nation's Leading Scientists and Innovators |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy President Obama to Honor Nation's Leading Scientists and Innovators President Obama to Honor Nation's Leading Scientists and Innovators January 22, 2016 - 10:59am Addthis Original content from Whitehouse.gov The White House announced the latest recipients of the National Medal of Science and National Medal of Technology and Innovation-our Nation's highest honors for achievement and leadership in advancing the fields of science and technology. The new awardees will

  16. Institute for Advanced Composites Helping America Lead on Clean Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing | Department of Energy Institute for Advanced Composites Helping America Lead on Clean Energy Manufacturing Institute for Advanced Composites Helping America Lead on Clean Energy Manufacturing June 18, 2015 - 4:28pm Addthis Assistant Secretary for Energy Efficiency and Renewable Energy Dr. David Danielson speaks during the launch of the Institute for Advanced Composites Manufacturing Innovation in Knoxville, Tennessee. | Photo courtesy of Oak Ridge National Laboratory.

  17. Inspiration from world-class scientists leads Patricia Langan to

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    nanoscience Inspiration from world-class scientists leads student to nanoscience Inspiration from world-class scientists leads Patricia Langan to nanoscience Graduate research assistant discovered her passion while interning as an undergraduate student in the Bioscience Division. August 1, 2012 Patricia Langan Patricia Langan has been a student for five years now. After graduating with a B.S in Molecular, Cell and Developmental Biology from the University of California, Santa Cruz, she

  18. 2016 Leading Rater Round Table Report | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Leading Rater Round Table Report 2016 Leading Rater Round Table Report A dramatic movement to zero energy ready homes is just beginning. This includes statewide codes, large developments, and a growing commitment to the DOE Zero Energy Ready Home program. Continued progress will rely on an increasing number of Home Energy Rating System (HERS) raters effectively bringing the business case, technical solutions, and verification services for Zero Energy Ready Home to our nation's builders. At this

  19. A Minority Serving Institution Leads the Way in Better Buildings |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy A Minority Serving Institution Leads the Way in Better Buildings A Minority Serving Institution Leads the Way in Better Buildings July 5, 2012 - 6:06pm Addthis Secretary Chu visits Delaware State University to commemorate the school's efforts with the Better Buildings Initiative. Secretary Chu visits Delaware State University to commemorate the school's efforts with the Better Buildings Initiative. Dot Harris Dot Harris Director, Office of Economic Impact and Diversity

  20. Questions about how plants die leads to climate change answers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Questions about how plants die leads to climate change answers Questions about how plants die leads to climate change answers Understanding mechanisms of mortality will provide important input to future climate forecasts. March 12, 2012 Tree in the desert The scientists' goal is to provide basic insights into questions such as how plants die, especially during drought. While the question of plant mortality is easy to conceptualize, it is difficult to study because of the spatial and temporal

  1. United States Regains Lead with World's Fastest Supercomputer |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Regains Lead with World's Fastest Supercomputer United States Regains Lead with World's Fastest Supercomputer June 18, 2012 - 2:02pm Addthis NEWS MEDIA CONTACT (202) 586-4940 WASHINGTON - Energy Secretary Steven Chu today announced that a supercomputer called Sequoia at Lawrence Livermore National Laboratory (LLNL) in Livermore, California, received the rank of the world's most powerful computing system. The Top500 list, which annually ranks the world's fastest

  2. Lead Research and Development Activity for High Temperature, Low Relative

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Humidity Membrane Program | Department of Energy Lead Research and Development Activity for High Temperature, Low Relative Humidity Membrane Program Lead Research and Development Activity for High Temperature, Low Relative Humidity Membrane Program A presentation to the High Temperature Membranes Working Group meeting, May 19, 2006. fenton.pdf (448.4 KB) More Documents & Publications Discussion Overview In Plane Conductivity Testing, BekkTech LLC Progress and Status on Through-Plane

  3. Leading Edge Technology in Diesel Emissions Control | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Leading Edge Technology in Diesel Emissions Control Leading Edge Technology in Diesel Emissions Control Poster presented at the 16th Directions in Engine-Efficiency and Emissions Research (DEER) Conference in Detroit, MI, September 27-30, 2010. p-02_roberts.pdf (193.56 KB) More Documents & Publications NO2 Management in Diesel Exhaust System Experimental Evaluation of DOC Performance Using Secondary Fuel Injection Low Temperature Catalyst for Fuel Injection System

  4. Leading the Charge: Chairman Vig Champions Progress, Sustainability |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Chairman Vig Champions Progress, Sustainability Leading the Charge: Chairman Vig Champions Progress, Sustainability October 20, 2014 - 5:00pm Addthis A photo of Chairman Vig. Change doesn't happen on its own. It's led by dedicated and passionate people who are committed to empowering Indian Country to energize future generations. Leading the Charge is a regular feature spotlighting the movers and shakers in energy on tribal lands. This issue we had the opportunity to

  5. Leading the Nation in Clean Energy Deployment | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Leading the Nation in Clean Energy Deployment Leading the Nation in Clean Energy Deployment This document summarizes key efforts and projects that are part of the DOE/NREL Integrated Deployment effort to integrated energy efficiency and renewable energy technologies in cities, states, island locations, and communities around the world. id_overview.pdf (569.07 KB) More Documents & Publications A Tale of Two Cities: Greensburg Rebuilds as a National Model for Green Communities (Fact Sheet)

  6. Imagine Tomorrow: Student Competition Leads to Innovative Biofuel Ideas |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Imagine Tomorrow: Student Competition Leads to Innovative Biofuel Ideas Imagine Tomorrow: Student Competition Leads to Innovative Biofuel Ideas May 28, 2014 - 9:20am Addthis Watch the video above to learn more about the Imagine Tomorrow competition. Leslie Ovard Bioenergy Policy Specialist, Bioenergy Technologies Office Can you imagine if solar panels could be used to grow algae for fuel? Or if your morning coffee could not only get your day started, but also serve as a

  7. Lab Breakthrough: Fusion Research Leads to Antiterrorism Device |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Fusion Research Leads to Antiterrorism Device Lab Breakthrough: Fusion Research Leads to Antiterrorism Device June 26, 2012 - 12:17pm Addthis Researchers at the Princeton Plasma Physics Laboratory developed an antiterrorism device that can detect and identify sources of dangerous radiation that could be used in a dirty bomb. See the other Lab Breakthrough videos on the YouTube playlist. Michael Hess Michael Hess Former Digital Communications Specialist, Office of Public

  8. Cooperative Catalyst leads to Transformative Results | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cooperative Catalyst leads to Transformative Results Capitalizing on the concept that everything proceeds faster with a little cooperation, researchers showed how designing cooperation into solid catalysts leads to enormous benefits.Catalysts attached to a porous solid support are preferred industrially because they are easier to separate from liquid products and reuse. But, these bound catalysts typically do not perform as well and probing their interiors to figure out how to improve them has

  9. Glass composition development for stabilization of lead based paints

    SciTech Connect (OSTI)

    Marra, J.C.

    1996-10-01

    Exposure to lead can lead to adverse health affects including permanent damage to the central nervous system. Common means of exposure to lead are from ingestion of lead paint chips or breathing of dust from deteriorating painted surfaces. The U.S. Army has over 101 million square feet of buildings dating to World War II or earlier. Many of these structures were built before the 1978 ban on lead based paints. The U.S. Army Corps of Engineers CERL is developing technologies to remove and stabilize lead containing organic coatings. Promising results have been achieved using a patented flame spray process that utilizes a glass frit to stabilize the hazardous constituents. When the glass frit is sprayed onto the paint containing substrate, differences in thermal expansion coefficients between the frit and the paint results in spalling of the paint from the substrate surface. The removed fragments are then collected and remelted to stabilize the hazardous constituents and allow for disposal as non-hazardous waste. Similar successful results using a patented process involving microwave technology for paint removal have also been achieved. In this process, the painted surface is coated with a microwave coupling compound that when exposed to microwave energy results in the spalling of the hazardous paint from the surface. The fragments can again be accumulated and remelted for stabilization and disposal.

  10. MERCURY AND LEAD SAMPLING AT MINNESOTA POWER'S BOSWELL ENERGY CENTER

    SciTech Connect (OSTI)

    Dennis L. Laudal

    2000-08-01

    At the request of the Minnesota Power, Inc., the Energy & Environmental Research Center (EERC) sampled for lead at the stack (or duct directly leading to the stack) for three units at the Boswell Energy Center. All sampling was done in triplicate using U.S. Environmental Protection Agency (EPA) Method 12, with sampling procedures following EPA Methods 1 through 4. During the test program, lead sampling was done using EPA Method 12 in the duct at the outlet of the baghouse serving Unit 2 and the duct at the outlet of the wet particulate scrubber serving Unit 3. For Unit 4, lead sampling was done at the stack. The specific objective for the project was to determine the concentration of lead in the flue gas being emitted into the atmosphere from the Boswell Energy Center. The test program was performed during the period of May 8 through 11, 2000. This report presents the test data, sample calculations, and results, and a discussion of the lead sampling performed at the Boswell Energy Center. The detailed test data and test results, raw test data, process data, laboratory reports, and equipment calibration records are provided in Appendices A, B, and C.

  11. Vitrification of lead-based paint using thermal spray

    SciTech Connect (OSTI)

    Kumar, A.; Covey, S.W.; Lattimore, J.L.; Boy, J.H.

    1996-12-31

    Lead-based paint (LBP) primers have been used to protect steel structures from corrosion. Abrasive blasting is currently used to remove old LBP. During abrasive blasting a containment structure is required to keep the hazardous lead dust from contaminating air, soil, or water. A thermal spray vitrification (TSV) process to remove LBP was developed. Dried glass powder is melted in the high temperature flame of the thermal spray torch. When the glass strikes the substrate it is molten and reacts with the paint on the substrate. The organic components of the paint are pyrolyzed, while the lead ions are trapped on the surface of glass. The quenching stresses in the glass cause the glass to crack and spall off the substrate. The crumbled glass fragments can be collected and remelted, immobilizing the lead ions within the glass network, thereby preventing leaching. The resulting glass can be disposed of as non-hazardous waste. The process is dust-free, eliminating the need for containment. The volume of residue waste is less than for abrasive blasting and is nonhazardous. The concept and techniques of using the thermal spray vitrification process for the removal and the containment of lead from a section of a bridge containing lead-based paint have been successfully demonstrated.

  12. Lead in human blood from children living in Campania, Italy

    SciTech Connect (OSTI)

    Amodio-Cocchieri, R.; Arnese, A.; Prospero, E.; Roncioni, A.

    1996-03-01

    Blood lead (PbB) levels were determined in children living Campania (in Naples and in a rural zone in the district of Caserta). Atmospheric lead (PbA) concentration in these considered areas was monitored for 1 yr (1993-1994). The children tested were questioned about common sources of lead, other than atmospheric relating to their living and dietary habits. The PbB levels in children living in Naples were at the 50th percentile, 18.8 {mu}g/dl in males and 13.7 {mu}g/dl in females; in children living in the rural area the median PbB levels were 8.9{mu}g/dl in males, and 9.9 {mu}g/dl in females. The annual mean values of atmospheres lead were 1.15 {plus_minus} 0.24 {mu}g/dl in Naples and 0.23 {plus_minus} 0.07 {mu}g/dl in the rural area. Significant and congruent mean differences between urban and rural sites were found in children`s blood and concurrent air lead. Considering the PbB level of 10 {mu}g/dl as the maximum level that is not associated any known adverse effect in children, the Neapolitan group can be considered at risk of chronic intoxication by lead. 18 refs., 3 figs., 4 tabs.

  13. Batteries called primary source of lead, cadmium in municipal waste

    SciTech Connect (OSTI)

    Not Available

    1989-04-01

    The US Environmental Protection Agency reports that lead-acid batteries, such as those used in automobiles, and rechargeable nickel-cadmium batteries used in consumer electronics equipment, are the primary sources of lead and cadmium in municipal trash and garbage. A report prepared for EPA analyzed existing data from 1970 to 1986 and made projections to the year 2000. Lead-acid batteries continue to constitute a major source of lead in garbage even though 80 percent of them are now recycled. As a result, EPA is calling for additional recycling of batteries. This study is an important step in implementing EPA's strategy for helping states and cities achieve the national goal of recycling and reducing 25 percent of all municipal garbage by 1992. The findings on batteries are the result of a study conducted for EPA because of concern over the levels of lead and cadmium found n ash (residue) from municipal waste incinerators. Lead and cadmium are two metals of particular concern in the solid waste stream. The metals can contaminate soil and groundwater when landfilled. They also may be found in some incinerator emissions.

  14. The MicrobesOnline Web site for comparative genomics

    SciTech Connect (OSTI)

    Alm, Eric J.; Huang, Katherine H.; Price, Morgan N.; Koche,Richard P.; Keller, Keith; Dubchak, Inna L.; Arkin, Adam P.

    2004-11-05

    At present, hundreds of microbial genomes have been sequenced, and hundreds more are currently in the pipeline. The Virtual Institute for Microbial Stress and Survival has developed a publicly available suite of Web-based comparative genomic tools (http://www.microbesonline.org) designed to facilitate multispecies comparison among prokaryotes. Highlights of the Microbes Online Web site include operon and regulon predictions, a multispecies genome browser, a multispecies Gene Ontology browser, a comparative KEGG metabolic pathway viewer, a Bioinformatics Workbench for in-depth sequence analysis, and Gene Carts that allow users to save genes of interest for further study while they browse. In addition, we provide an interface for genome annotation, which like all of the tools reported here, is freely available to the scientific community.

  15. Peer Review Presentations Now Available Online | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Photo by Dennis SchroederNREL. BETO-Funded Algae Project at NREL Named a Finalist for 2015 R&D 100 Awards Imagine Tomorrow: Student Competition Leads to Innovative Biofuel Ideas...

  16. Metagenomics, metaMicrobesOnline and Kbase Data Integration (MICW - Metagenomics Informatics Challenges Workshop: 10K Genomes at a Time)

    ScienceCinema (OSTI)

    Dehal, Paramvir [LBNL

    2013-01-22

    Berkeley Lab's Paramvir Dehal on "Managing and Storing large Datasets in MicrobesOnline, metaMicrobesOnline and the DOE Knowledgebase" at the Metagenomics Informatics Challenges Workshop held at the DOE JGI on October 12-13, 2011.

  17. Energy-conserving, pollution-free extraction process for the recovery of lead from lead sulfide concentrates. Final report

    SciTech Connect (OSTI)

    Rao, Y.K.

    1981-09-01

    Research concerned with the development of a new process for the extraction of lead from lead sulfide concentrates is described. The process consists of smelting lead sulfide concentrates with lime and carbon to produce liquid lead. The sulfur in the concentrates is tied up as solid calcium sulfide residue which can be further processed to regenerate lime. No sulfur oxides are generated during the process. The off-gases consist of CO and CO/sub 2/. Coke, coal, coal-char or lignite-char may be used as reducing agents. The reduction process can be catalyzed to an appreciable degree by the addition of small concentrations of catalysts. For the most part, these catalytic substances are either pure or mixed alkali-metal salts. The present process can be applied for extracting zinc from zinc sulfide concentrates and also for the recovery of copper and nickel from their respective sulfide concentrates.

  18. Energy-conserving, pollution-free extraction process for the recovery of lead from lead sulfide concentrates. Final report

    SciTech Connect (OSTI)

    Rao, Y.K.

    1981-09-01

    Research concerned with the development of a new process for the extraction of lead from lead sulfide concentrates is described. The process consists of smelting lead sulfide concentrates with lime and carbon to produce liquid lead. The sulfur in the concentrates is tied up as solid calcium sulfide residue which can be further processed to regenerate lime. No sulfur oxides are generated during the process. The off-gas consist of CO and CO/sub 2/. Coke, coal, coal-char or lignite-char may be used as reducing agents. The reduction process can be catalyzed to an appreciable degree by the addition of small concentrations of catalysts. For the most part, these catalytic substances are either pure or mixed alkali-metal salts. The present process can be applied for extracting zinc from zinc sulfide concentrates and also for the recovery of copper and nickel from their respective sulfide concentrates.

  19. Qualification of Three On-line Slurry Monitoring Devices for Application during Waste Retrieval Operations at DOE Sites

    SciTech Connect (OSTI)

    Bontha, Jagannadha R.; Bamberger, Judith A.; Hylton, Tom D.; May, T. H.

    2000-10-18

    Qualification of Three On-line Slurry Monitoring Devices for Application during Waste Retrieval Operations at DOE Sites

  20. Better Buildings Residential Network Peer Exchange Call Series: Generating Energy Efficiency Project Leads and Allocating Leads to Contractors

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Generating Energy Efficiency Project Leads and Allocating Leads to Contractors Call Slides and Discussion Summary February 26, 2015 Call Participants  Build It Green  City of Chula Vista  City of Philadelphia  Civic Works/Retrofit Baltimore  Clean Energy Durham  Clean Energy Works  Community Office for Resource Efficiency  Dr. Energy Saver  Efficiency Maine  Efficiency Nova Scotia  Energy Efficiency Specialists, LLC  Energy Pioneer Solutions  Greater

  1. Microfluidic sorting of protein nanocrystals by size for X-ray free-electron laser diffraction

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Abdallah, Bahige G.; Zatsepin, Nadia A.; Roy-Chowdhury, Shatabdi; Coe, Jesse; Conrad, Chelsie E.; Dörner, Katerina; Sierra, Raymond G.; Stevenson, Hilary P.; Camacho-Alanis, Fernanda; Grant, Thomas D.; et al

    2015-08-19

    We report that the advent and application of the X-ray free-electron laser (XFEL) has uncovered the structures of proteins that could not previously be solved using traditional crystallography. While this new technology is powerful, optimization of the process is still needed to improve data quality and analysis efficiency. One area is sample heterogeneity, where variations in crystal size (among other factors) lead to the requirement of large data sets (and thus 10–100 mg of protein) for determining accurate structure factors. To decrease sample dispersity, we developed a high-throughput microfluidic sorter operating on the principle of dielectrophoresis, whereby polydisperse particles canmore » be transported into various fluid streams for size fractionation. Using this microsorter, we isolated several milliliters of photosystem I nanocrystal fractions ranging from 200 to 600 nm in size as characterized by dynamic light scattering, nanoparticle tracking, and electron microscopy. Sorted nanocrystals were delivered in a liquid jet via the gas dynamic virtual nozzle into the path of the XFEL at the Linac Coherent Light Source. We obtained diffraction to ~4 Å resolution, indicating that the small crystals were not damaged by the sorting process. We also observed the shape transforms of photosystem I nanocrystals, demonstrating that our device can optimize data collection for the shape transform-based phasing method. Using simulations, we show that narrow crystal size distributions can significantly improve merged data quality in serial crystallography. From this proof-of-concept work, we expect that the automated size-sorting of protein crystals will become an important step for sample production by reducing the amount of protein needed for a high quality final structure and the development of novel phasing methods that exploit inter-Bragg reflection intensities or use variations in beam intensity for radiation damage-induced phasing. Ultimately, this method

  2. Method for determining aerosol particle size, device for determining aerosol particle size

    DOE Patents [OSTI]

    Novick, V.J.

    1998-10-06

    A method for determining the mass median diameter D of particles contained in a fluid is provided wherein the data of the mass of a pre-exposed and then a post-exposed filter is mathematically combined with data concerning the pressure differential across the same filter before and then after exposure to a particle-laden stream. A device for measuring particle size is also provided wherein the device utilizes the above-method for mathematically combining the easily quantifiable data. 2 figs.

  3. Synthesis of supported bimetallic nanoparticles with controlled size and composition distributions for active site elucidation

    SciTech Connect (OSTI)

    Hakim, Sikander H.; Sener, Canan; Alba Rubio, Ana C.; Gostanian, Thomas M.; O'neill, Brandon J; Ribeiro, Fabio H.; Miller, Jeffrey T.; Dumesic, James A

    2015-08-01

    Elucidation of active sites in supported bimetallic catalysts is complicated by the high level of dispersity in the nanoparticle size and composition that is inherent in conventional methods of catalyst preparation. We present a synthesis strategy that leads to highly dispersed, bimetallic nanoparticles with uniform particle size and composition by means of controlled surface reactions. We demonstrate the synthesis of three systems, RhMo, PtMo, and RhRe, consisting of a highly reducible metal with an oxophilic promoter. These catalysts are characterized by FTIR, CO chemisorption, STEM/EDS, TPR, and XAS analysis. The catalytic properties of these bimetallic nanoparticles were probed for the selective CO hydrogenolysis of (hydroxymethyl)tetrahydropyran to produce 1,6 hexanediol. Based on the characterization results and reactivity trends, the active sites in the hydrogenolysis reaction are identified to be small ensembles of the more noble metal (Rh, Pt) adjacent to highly reduced moieties of the more oxophilic metal (Mo, Re).

  4. A simulator designated to the help sizing of waste incineration plant with energy valorization

    SciTech Connect (OSTI)

    Lemoult, B.

    1998-07-01

    The integrated waste treatment (sorting, recycling, composting, incineration, tip) concept is increasing. In this concept, incineration remains the last way of destruction before tipping of refuse. With the aim to improve thermal and economic efficiencies of this kind of treatment, thermal and/or electrical energy are produced in incineration plants. If environmental rules lead to a steady increase of such plants, a lot of data have to be evaluated to find the best size, especially under economic aspects, for a given project. The author presents the specification of the software ARTEMIS, which helps a project manager to find the optimal size of a plant, to quantify the effect of various technical options, and to compare some operating management. Garbage deposit (quantity and quality), energy valorization (electricity price, thermal needs), machines (furnace, high and low pressure turbines, heat exchanger, auxiliary boiler) are taken into account. Energy and economic annual balance are also calculated with a hourly simulation step.

  5. Analysis of residuum desulfurization by size exclusion chromatography with element specific detection

    SciTech Connect (OSTI)

    Reynolds, J.G.; Biggs, W.R. )

    1987-04-01

    An important aspect of residuum upgrading is the fate of heteroatomic elements - N, S, Ni, V - during processing. Because these elements are usually in concentration in residua, new process technologies are under development to handle their removal. Understanding the removal mechanism(s) for the heteroatoms could lead to better process options. In this regard, the authors recently reported on the size profile changes of Ni- and V-containing components in heavy residua during thermal hydroprocessing and fixed-bed catalytic hydroprocessing. Using size exclusion chromatography and element specific detection by inductively coupled plasma emission spectrometry (SEC-ICP), they observed characteristic metal profiles which depended on the processing conditions. They have now turned their attention to the behavior of sulfur during hydroprocessing. This report summarizes preliminary results in a study of S compounds in heavy residua, and their behavior during thermal hydroprocessing.

  6. Importance of Size and Distribution of Ni Nanoparticles for the Hydrodeoxygenation of Microalgae Oil

    SciTech Connect (OSTI)

    Song, Wenji; Zhao, Chen; Lercher, Johannes A.

    2013-07-22

    Improved synthetic approaches for preparing small-sized Ni nanoparticles (d=3 nm) supported on HBEA zeolite have been explored and compared with the traditional impregnation method. The formation of surface nickel silicate/aluminate involved in the two precipitation processes are inferred to lead to the stronger interaction between the metal and the support. The lower Brnsted acid concentrations of these two Ni/HBEA catalysts compared with the parent zeolite caused by the partial exchange of Brnsted acid sites by Ni2+ cations do not influence the hydrodeoxygenation rates, but alter the product selectivity. Higher initial rates and higher stability have been achieved with these optimized catalysts for the hydrodeoxygenation of stearic acid and microalgae oil. Small metal particles facilitate high initial catalytic activity in the fresh sample and size uniformity ensures high catalyst stability.

  7. Characteristics and sources of intermediate size particles in recovery boilers : final project report.

    SciTech Connect (OSTI)

    Baxter, Larry L.; Shaddix, Christopher R.; Verrill, Christopher L.; Wessel, Richard A.

    2005-02-01

    As part of the U.S. Department of Energy (DOE) Office of Industrial Technologies (OIT) Industries of the Future (IOF) Forest Products research program, a collaborative investigation was conducted on the sources, characteristics, and deposition of particles intermediate in size between submicron fume and carryover in recovery boilers. Laboratory experiments on suspended-drop combustion of black liquor and on black liquor char bed combustion demonstrated that both processes generate intermediate size particles (ISP), amounting to 0.5-2% of the black liquor dry solids mass (BLS). Measurements in two U.S. recovery boilers show variable loadings of ISP in the upper furnace, typically between 0.6-3 g/Nm{sup 3}, or 0.3-1.5% of BLS. The measurements show that the ISP mass size distribution increases with size from 5-100 {micro}m, implying that a substantial amount of ISP inertially deposits on steam tubes. ISP particles are depleted in potassium, chlorine, and sulfur relative to the fuel composition. Comprehensive boiler modeling demonstrates that ISP concentrations are substantially overpredicted when using a previously developed algorithm for ISP generation. Equilibrium calculations suggest that alkali carbonate decomposition occurs at intermediate heights in the furnace and may lead to partial destruction of ISP particles formed lower in the furnace. ISP deposition is predicted to occur in the superheater sections, at temperatures greater than 750 C, when the particles are at least partially molten.

  8. Control of both particle and pore size in nanoporous palladium alloy powders

    SciTech Connect (OSTI)

    Jones, Christopher G.; Cappillino, Patrick J.; Stavila, Vitalie; Robinson, David B.

    2014-07-15

    Energy storage materials often involve chemical reactions with bulk solids. Porosity within the solids can enhance reaction rates. The porosity can be either within or between individual particles of the material. Greater control of the size and uniformity of both types of pore should lead to enhancements of charging and discharging rates in energy storage systems. Furthermore, to control both particle and pore size in nanoporous palladium (Pd)-based hydrogen storage materials, first we created uniformly sized copper particles of about 1 μm diameter by the reduction of copper sulfate with ascorbic acid. In turn, these were used as reducing agents for tetrachloropalladate in the presence of a block copolymer surfactant. The copper reductant particles are geometrically self-limiting, so the resulting Pd particles are of similar size. The surfactant induces formation of 10 nm-scale pores within the particles. Some residual copper is alloyed with the Pd, reducing hydrogen storage capacity; use of a more reactive Pd salt can mitigate this. The reaction is conveniently performed in gram-scale batches.

  9. Subnanometer and nanometer catalysts, method for preparing size-selected catalysts

    DOE Patents [OSTI]

    Vajda, Stefan; Pellin, Michael J.; Elam, Jeffrey W.; Marshall, Christopher L.; Winans, Randall A.; Meiwes-Broer, Karl-Heinz

    2012-03-27

    Highly uniform cluster based nanocatalysts supported on technologically relevant supports were synthesized for reactions of top industrial relevance. The Pt-cluster based catalysts outperformed the very best reported ODHP catalyst in both activity (by up to two orders of magnitude higher turn-over frequencies) and in selectivity. The results clearly demonstrate that highly dispersed ultra-small Pt clusters precisely localized on high-surface area supports can lead to affordable new catalysts for highly efficient and economic propene production, including considerably simplified separation of the final product. The combined GISAXS-mass spectrometry provides an excellent tool to monitor the evolution of size and shape of nanocatalyst at action under realistic conditions. Also provided are sub-nanometer gold and sub-nanometer to few nm size-selected silver catalysts which possess size dependent tunable catalytic properties in the epoxidation of alkenes. Invented size-selected cluster deposition provides a unique tool to tune material properties by atom-by-atom fashion, which can be stabilized by protective overcoats.

  10. Subnanometer and nanometer catalysts, method for preparing size-selected catalysts

    DOE Patents [OSTI]

    Vajda, Stefan , Pellin, Michael J.; Elam, Jeffrey W.; Marshall, Christopher L.; Winans, Randall A.; Meiwes-Broer, Karl-Heinz

    2012-04-03

    Highly uniform cluster based nanocatalysts supported on technologically relevant supports were synthesized for reactions of top industrial relevance. The Pt-cluster based catalysts outperformed the very best reported ODHP catalyst in both activity (by up to two orders of magnitude higher turn-over frequencies) and in selectivity. The results clearly demonstrate that highly dispersed ultra-small Pt clusters precisely localized on high-surface area supports can lead to affordable new catalysts for highly efficient and economic propene production, including considerably simplified separation of the final product. The combined GISAXS-mass spectrometry provides an excellent tool to monitor the evolution of size and shape of nanocatalyst at action under realistic conditions. Also provided are sub-nanometer gold and sub-nanometer to few nm size-selected silver catalysts which possess size dependent tunable catalytic properties in the epoxidation of alkenes. Invented size-selected cluster deposition provides a unique tool to tune material properties by atom-by-atom fashion, which can be stabilized by protective overcoats.

  11. Control of both particle and pore size in nanoporous palladium alloy powders

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Jones, Christopher G.; Cappillino, Patrick J.; Stavila, Vitalie; Robinson, David B.

    2014-07-15

    Energy storage materials often involve chemical reactions with bulk solids. Porosity within the solids can enhance reaction rates. The porosity can be either within or between individual particles of the material. Greater control of the size and uniformity of both types of pore should lead to enhancements of charging and discharging rates in energy storage systems. Furthermore, to control both particle and pore size in nanoporous palladium (Pd)-based hydrogen storage materials, first we created uniformly sized copper particles of about 1 μm diameter by the reduction of copper sulfate with ascorbic acid. In turn, these were used as reducing agentsmore » for tetrachloropalladate in the presence of a block copolymer surfactant. The copper reductant particles are geometrically self-limiting, so the resulting Pd particles are of similar size. The surfactant induces formation of 10 nm-scale pores within the particles. Some residual copper is alloyed with the Pd, reducing hydrogen storage capacity; use of a more reactive Pd salt can mitigate this. The reaction is conveniently performed in gram-scale batches.« less

  12. Isotopic generator for bismuth-212 and lead-212 from radium

    DOE Patents [OSTI]

    Atcher, Robert W.; Friedman, Arnold M.; Hines, John

    1987-01-01

    A method and apparatus for providing radionuclides of bismuth-212 and lead-212. Thorium-228 and carrier solution starting material is input to a radiologically contained portion of an isotopic generator system, and radium-224 is separated from thorium-228 which is retained by a strongly basic anion exchange column. The separated radium-224 is transferred to an accessible, strongly acidic cationic exchange column. The cationic column retains the radium-224, and natural radioactive decay generates bismuth-212 and lead-212. The cationic exchange column can also be separated from the contained portion of the system and utilized without the extraordinary safety measures necessary in the contained portion. Furthermore, the cationic exchange column provides over a relatively long time period the short lived lead-212 and bismuth-212 radionuclides which are useful for a variety of medical therapies.

  13. HUD lead-based-paint abatement demonstration (FHA)

    SciTech Connect (OSTI)

    Not Available

    1991-08-01

    The toxic effects of lead on human beings, and particularly on young children, have been known for many years. Amendments to the Lead-Based Paint Poisoning Prevention Act (LPPPA) in 1987 and 1988 required the U.S. Department of Housing and Urban Development (HUD) to undertake a lead-based paint abatement demonstration program. The overall objective of the demonstration was to 'utilize a sufficient number of abatement methods in a sufficient number of areas and circumstances to demonstrate their relative cost-effectiveness...' One component of the demonstration was conducted in HUD-owned, vacant, single-family properties and was completed in the fall of 1990. A public housing component is expected to be completed in 1991. The report describes the objectives, research design, experience and findings of the completed component, which is generally known as the FHA demonstration, named after the Federal Housing Administration, which held title to the houses.

  14. Methods for measuring lead concentrations in paint films

    SciTech Connect (OSTI)

    McKnight, M.E.; Byrd, W.E.; Roberts, W.E.; Lagergren, E.S.

    1989-12-01

    Recent legislation required the U.S. Department of Housing and Urban Development (HUD) to establish procedures to abate lead-based paint in existing HUD-assisted housing. The legislation also required HUD to assess the accuracy, precision, reliability, and safety of methods for measuring lead content of paint films and to investigate the availability of testers and samplers. The National Institute of Standards and Technology was requested to carry out the assessment. With regard to accuracy and precision of field measurements, it was concluded that: chemical spot tests when carried out by an experienced analytical chemistry technician can detect the presence of lead in paint films having concentrations in excess of 1 mg/sq cm about 90% of the time; the estimate of the precision of a field measurement procedure using lead-specific portable X-ray fluorescence (XRF) analyzers for lead concentrations near 1 mg/sq cm is + or - 0.6 mg/sq cm and the estimate of the bias is 0.2 mg/sq cm; this results in a 95% confidence interval of + or - 1.4 mg/sq cm; and based upon very preliminary measurements using the latest version of the spectrum analyzer portable XRF, the 95% confidence interval for field measurements is estimated to be + or - 0.5 mg/sq cm. In addition to field methods, standard laboratory procedures can be used to measure the lead content of paint samples to within a few percent of the quantity present over a wide range extending from less than 0.1 to over 10 mg/sq cm. Sample collection and sample dissolution procedures were also investigated.

  15. Finite size effects in the static structure factor of dusty plasmas

    SciTech Connect (OSTI)

    Davletov, A. E. Yerimbetova, L. T.; Mukhametkarimov, Ye. S.; Ospanova, A. K.

    2014-07-15

    Based on the previously developed pseudopotential model of the dust particles interaction, which takes into account both the finite size and screening effects, the equilibrium distribution functions are investigated in a broad range of plasma parameters. The treatment stems entirely from the renormalization theory of plasma particles interactions which leads to the so-called generalized Poisson-Boltzmann equation. In particular, an analytical expression for the static structure factor of the dust particles is proposed and its non-monotonic behavior in the hyper-netted chain approximation is found in a specified domain of plasma parameters to indicate the formation of short- or even long-range order in the system.

  16. THE SIZE DISTRIBUTION OF THE NEPTUNE TROJANS AND THE MISSING INTERMEDIATE-SIZED PLANETESIMALS

    SciTech Connect (OSTI)

    Sheppard, Scott S.; Trujillo, Chadwick A.

    2010-11-10

    We present an ultra-deep survey for Neptune Trojans using the Subaru 8.2 m and Magellan 6.5 m telescopes. The survey reached a 50% detection efficiency in the R band at m{sub R} = 25.7 mag and covered 49 deg{sup 2} of sky. m{sub R} = 25.7 mag corresponds to Neptune Trojans that are about 16 km in radius (assuming an albedo of 0.05). A paucity of smaller Neptune Trojans (radii < 45 km) compared with larger ones was found. The brightest Neptune Trojans appear to follow a steep power-law slope (q = 5 {+-} 1) similar to the brightest objects in the other known stable reservoirs such as the Kuiper Belt, Jupiter Trojans, and main belt asteroids. We find a roll-over for the Neptune Trojans that occurs around a radius of r = 45 {+-} 10 km (m{sub R} = 23.5 {+-} 0.3), which is also very similar to the other stable reservoirs. All the observed stable regions in the solar system show evidence for Missing Intermediate-Sized Planetesimals (MISPs). This indicates a primordial and not collisional origin, which suggests that planetesimal formation proceeded directly from small to large objects. The scarcity of intermediate- and smaller-sized Neptune Trojans may limit them as being a strong source for the short period comets.

  17. Nation Leads Wind Energy Production and Innovation | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Nation Leads Wind Energy Production and Innovation Nation Leads Wind Energy Production and Innovation May 11, 2016 - 12:19pm Addthis Letter from the Wind Program Director This spring edition of the Wind Program Newsletter comes at the juncture of two important events for the wind industry: the 1-year anniversary of the U.S. Department of Energy Wind Program's historic Wind Vision Report and the start of American Wind Energy Association (AWEA) WINDPOWER 2016. We have quite a bit to celebrate this

  18. Research Leads to Improved Fuel Yields from Smaller Antenna Algae |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Research Leads to Improved Fuel Yields from Smaller Antenna Algae Research Leads to Improved Fuel Yields from Smaller Antenna Algae May 13, 2014 - 12:06pm Addthis Tasios Melis (center) shows plates with tla3 algae and its parent strain to Katie Randolph (left) and Sunita Satyapal during a site visit to his lab at the University of California, Berkeley. Tasios Melis (center) shows plates with tla3 algae and its parent strain to Katie Randolph (left) and Sunita Satyapal

  19. Fundamental studies and new applications of hybrid lead halide perovskites*

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    | MIT-Harvard Center for Excitonics Fundamental studies and new applications of hybrid lead halide perovskites* November 10, 2015 at 4:30pm/Duboc Room: 4-331 Riccardo Comin University of Toronto comin-1 In recent years light-harvesting devices based on a new class of organometallic lead iodide perovskites (CH3NH3PbI3) were demonstrated to exhibit power conversion efficiencies beyond 20%, rapidly approaching the performance of commercial silicon-based modules. Besides photovoltaics, important

  20. GE leads the way in photonics research | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    GE continues leading role in photonics industry - from LED to digital x-ray Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) GE continues leading role in photonics industry - from LED to digital x-ray Danielle Merfeld, Ph.D. 2015.07.27 Vice President Joseph Biden joined New York Gov. Andrew Cuomo in Rochester, New York

  1. INFOGRAPHIC: Better Buildings Leading to Big Energy Savings | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Better Buildings Leading to Big Energy Savings INFOGRAPHIC: Better Buildings Leading to Big Energy Savings May 11, 2016 - 12:35pm Addthis Better Buildings partners have saved more than $1.3 billion on energy costs. Our new infographic explains how Better Buildings works and why it’s important. | Graphic by <a href="/node/1332956">Carly Wilkins</a>, Energy Department Better Buildings partners have saved more than $1.3 billion on energy costs. Our new

  2. Saturation of the leading spike growth in backward Raman amplifiers

    SciTech Connect (OSTI)

    Malkin, V. M.; Fisch, N. J.; Toroker, Z.

    2014-09-15

    Backward Raman amplification of laser pulses in plasmas can produce nearly relativistic unfocused output intensities and multi-exawatt powers in compact devices. The largest achievable intensity depends on which of major competitive processes set this limit. It is shown here that the relativistic electron nonlinearity can cause saturation of the leading amplified spike intensity before filamentation instabilities develop. A simple analytical model for the saturation, which supports numerical simulations, is suggested. The upper limit for the leading output spike unfocused intensity is calculated.

  3. Cities Leading through Energy Analysis and Planning | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Us » Initiatives & Projects » Cities Leading through Energy Analysis and Planning Cities Leading through Energy Analysis and Planning Find energy use data for your city! Find energy use data for your city! Read more View this infographic to learn more about the Cities-LEAP report. View this infographic to learn more about the Cities-LEAP report. Read more Cities-LEAP analysis reveals energy focus for 20 cities. Cities-LEAP analysis reveals energy focus for 20 cities. Read more The Cities

  4. National Labs Leading Charge on Building Better Batteries | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Labs Leading Charge on Building Better Batteries National Labs Leading Charge on Building Better Batteries September 26, 2011 - 12:36pm Addthis Berkeley Lab researchers have designed a new anode -- a key component of lithium ion batteries -- made from a "tailored polymer" (pictured above at right in purple). It has a greater capacity to store energy since it can conduct electricity itself rather than using a polymer binder (such as PVDF, pictured above at left in brown) in

  5. Four-flavour leading-order hadronic contribution to the muon anomalous magnetic moment

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Burger, Florian; Feng, Xu; Hotzel, Grit; Jansen, Karl; Petschlies, Marcus; Renner, Dru B.

    2014-02-24

    We present a four-flavour lattice calculation of the leading-order hadronic vacuum polarisation contribution to the anomalous magnetic moment of the muon, aμhvp, arising from quark-connected Feynman graphs. It is based on ensembles featuring Nf=2+1+1 dynamical twisted mass fermions generated by the European Twisted Mass Collaboration (ETMC). Several light quark masses are used in order to yield a controlled extrapolation to the physical pion mass. We employ three lattice spacings to examine lattice artefacts and several different volumes to check for finite-size effects. Including the complete first two generations of quarks allows for a direct comparison with phenomenological determinations of amore » μhvp. The final result involving an estimate of the systematic uncertainty aμhvp=6.74 (21)(18) 10-8 shows a good overall agreement with these computations.« less

  6. Four-flavour leading-order hadronic contribution to the muon anomalous magnetic moment

    SciTech Connect (OSTI)

    Burger, Florian; Feng, Xu; Hotzel, Grit; Jansen, Karl; Petschlies, Marcus; Renner, Dru B.

    2014-02-24

    We present a four-flavour lattice calculation of the leading-order hadronic vacuum polarisation contribution to the anomalous magnetic moment of the muon, a?hvp, arising from quark-connected Feynman graphs. It is based on ensembles featuring Nf=2+1+1 dynamical twisted mass fermions generated by the European Twisted Mass Collaboration (ETMC). Several light quark masses are used in order to yield a controlled extrapolation to the physical pion mass. We employ three lattice spacings to examine lattice artefacts and several different volumes to check for finite-size effects. Including the complete first two generations of quarks allows for a direct comparison with phenomenological determinations of a ?hvp. The final result involving an estimate of the systematic uncertainty a?hvp=6.74 (21)(18) 10-8 shows a good overall agreement with these computations.

  7. Online Voting Begins for "America's Next Top Energy Innovator" |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Online Voting Begins for "America's Next Top Energy Innovator" Online Voting Begins for "America's Next Top Energy Innovator" January 26, 2012 - 10:17am Addthis WASHINGTON, D.C. - The U.S. Department of Energy (DOE) today invited Americans to vote online for the most innovative and promising start-up companies in the "America's Next Top Energy Innovator" challenge. Voting will end at 8:59 a.m. EST. on Monday, February 6, and the top start-up

  8. Communication Pathways in the Light Water Reactor Sustainability Online Monitoring Project

    SciTech Connect (OSTI)

    Nancy J. Lybeck; Magdy S. Tawfik; Binh T. Pham; Vivek Agarwal; Jamie Coble

    2011-09-01

    Implementation of online monitoring and prognostics in existing U.S. nuclear power plants will involve coordinating the efforts of national laboratories, utilities, universities, and private companies. Large amounts of operational data, including failure data, are necessary for the development and calibration of diagnostic and prognostic algorithms. The ability to use data from all available resources will provide the most expeditious avenue to implementation of online monitoring in existing NPPs; however, operational plant data are often considered proprietary. Secure methods for transferring and storing data are discussed, along with a potential technology for implementation of online monitoring.

  9. SWS Online Tool now includes Multifamily Content, plus a How-To Webinar |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy SWS Online Tool now includes Multifamily Content, plus a How-To Webinar SWS Online Tool now includes Multifamily Content, plus a How-To Webinar This announcement contains information on the integration of multifamily content in the SWS Online Tool, and a How-To Webinar on August 27, 2013. mf_content_now_available.pdf (116.96 KB) More Documents & Publications The Standard Work Specifications for Single-Family Home Energy Upgrades are now available€ at your

  10. Development of Model Filtration Media for Investigating Size-Dependent

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Filtration Efficiency | Department of Energy Model Filtration Media for Investigating Size-Dependent Filtration Efficiency Development of Model Filtration Media for Investigating Size-Dependent Filtration Efficiency A novel method for fabricating custom porous filtration media for emission control has been developed. Controlled pore sizes could be used to optimize high-capture efficiency with low backpressure. p-25_strzelec.pdf (2.84 MB) More Documents & Publications Fuel-Neutral Studies

  11. Quantum-size-controlled photoelectrochemical etching of semiconductor nanostructures

    DOE Patents [OSTI]

    Fischer, Arthur J.; Tsao, Jeffrey Y.; Wierer, Jr., Jonathan J.; Xiao, Xiaoyin; Wang, George T.

    2016-03-01

    Quantum-size-controlled photoelectrochemical (QSC-PEC) etching provides a new route to the precision fabrication of epitaxial semiconductor nanostructures in the sub-10-nm size regime. For example, quantum dots (QDs) can be QSC-PEC-etched from epitaxial InGaN thin films using narrowband laser photoexcitation, and the QD sizes (and hence bandgaps and photoluminescence wavelengths) are determined by the photoexcitation wavelength.

  12. CBEI: Coordinating RTUs in Small and Medium Sized Commercial Buildings -

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2015 Peer Review | Department of Energy Coordinating RTUs in Small and Medium Sized Commercial Buildings - 2015 Peer Review CBEI: Coordinating RTUs in Small and Medium Sized Commercial Buildings - 2015 Peer Review Presenter: James Braun, Purdue University View the Presentation CBEI: Coordinating RTUs in Small and Medium Sized Commercial Buildings - 2015 Peer Review (1.8 MB) More Documents & Publications Control and Diagnostics for Rooftop Units - 2014 BTO Peer Review CBEI: Lessons

  13. DOE Leads National Research Program in Gas Hydrates

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy today told Congress the agency is leading a nationwide program in search of naturally occurring natural gas hydrates - a potentially significant storehouse of methane--with far reaching implications for the environment and the nation's future energy supplies.

  14. Reproductive toxicity of low-level lead exposure in men

    SciTech Connect (OSTI)

    Telisman, Spomenka Colak, Bozo; Pizent, Alica; Jurasovic, Jasna; Cvitkovic, Petar

    2007-10-15

    Parameters of semen quality, seminal plasma indicators of secretory function of the prostate and seminal vesicles, sex hormones in serum, and biomarkers of lead, cadmium, copper, zinc, and selenium body burden were measured in 240 Croatian men 19-52 years of age. The subjects had no occupational exposure to metals and no known other reasons suspected of influencing male reproductive function or metal metabolism. After adjusting for age, smoking, alcohol, blood cadmium, and serum copper, zinc, and selenium by multiple regression, significant (P<0.05) associations of blood lead (BPb), {delta}-aminolevulinic acid dehydratase (ALAD), and/or erythrocyte protoporphyrin (EP) with reproductive parameters indicated a lead-related increase in immature sperm concentration, in percentages of pathologic sperm, wide sperm, round sperm, and short sperm, in serum levels of testosterone and estradiol, and a decrease in seminal plasma zinc and in serum prolactin. These reproductive effects were observed at low-level lead exposure (BPb median 49 {mu}g/L, range 11-149 {mu}g/L in the 240 subjects) common for general populations worldwide. The observed significant synergistic effect of BPb and blood cadmium on increasing serum testosterone, and additive effect of a decrease in serum selenium on increasing serum testosterone, may have implications on the initiation and development of prostate cancer because testosterone augments the progress of prostate cancer in its early stages.

  15. Size-Controlled Synthesis of Porphyrinic Metal-Organic Framework...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Size-Controlled Synthesis of Porphyrinic Metal-Organic Framework and Functionalization for Targeted Photodynamic Therapy Previous Next List Jiang, Juncong; Zhao, Yingbo; and Yaghi, ...

  16. Correlating Size and Composition-Dependent Effects with Magnetic...

    Office of Scientific and Technical Information (OSTI)

    Correlating Size and Composition-Dependent Effects with Magnetic, Mssbauer, and Pair Distribution Function Measurements in a Family of Catalytically Active Ferrite Nanoparticles ...

  17. CBEI: HVAC Packages for Small and Medium Sized Commercial Buildings...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CBEI: HVAC Packages for Small and Medium Sized Commercial Buildings - 2015 Peer Review Presenter: Russell Taylor, United Technologies Research Center View the Presentation CBEI: ...

  18. Sizing a New Water Heater | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    systems: Tankless or demand-type water heaters Solar water heating system Storage and heat pump (with tank) water heaters. For sizing combination water and space heating systems --...

  19. Reduce Pumping Costs Through Optimum Pipe Sizing | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reduce Pumping Costs Through Optimum Pipe Sizing (October 2005) (209.25 KB) More Documents & Publications Select an Energy-Efficient Centrifugal Pump Effect of Intake on Compressor ...

  20. Building America Webinar: HVAC Right-Sizing Part 1-Calculating...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the key criteria required to create accurate heating and cooling load calculations. ... HVAC Right-Sizing Part 1: Calculating Loads ZERH Webinar: Low Load HVAC in Zero Energy ...

  1. Reduce Pumping Costs through Optimum Pipe Sizing: Industrial...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    power required depends on flow rate, pipe size (diameter), overall pipe length, pipe characteristics (surface roughness, material, etc.), and properties of the fluid being pumped. ...

  2. Nano-sized structured layered positive electrode materials to...

    Office of Scientific and Technical Information (OSTI)

    positive electrode materials to enable high energy density and high rate capability lithium batteries Title: Nano-sized structured layered positive electrode materials to ...

  3. Property:Incentive/EligSysSize | Open Energy Information

    Open Energy Info (EERE)

    minimum
    Recycled Energy: 15 Megawatt maximum Alameda Municipal Power - Solar Photovoltaics Rebate Program (California) + Maximum size is 1 MW or 110% of customer's...

  4. Efficient Algorithm for Locating and Sizing Series Compensation...

    Office of Scientific and Technical Information (OSTI)

    Compensation Devices in Large Transmission Grids: Model Implementation We explore optimization methods for planning the placement, sizing and operations of Flexible Alternating...

  5. Droplet sizes, dynamics and deposition in vertical annular flow

    SciTech Connect (OSTI)

    Lopes, J C.B.; Dukler, A E

    1985-10-01

    The role of droplets in vertical upwards annular flow is investigated, focusing on the droplet size distributions, dynamics, and deposition phenomena. An experimental program was performed based on a new laser optical technique developed in these laboratories and implemented here for annular flow. This permitted the simultaneous measurement of droplet size, axial and radial velocity. The dependence of droplet size distributions on flow conditions is analyzed. The Upper-Log Normal function proves to be a good model for the size distribution. The mechanism controlling the maximum stable drop size was found to result from the interaction of the pressure fluctuations of the turbulent flow of the gas core with the droplet. The average axial droplet velocity showed a weak dependence on gas rates. This can be explained once the droplet size distribution and droplet size-velocity relationship are analyzed simultaneously. The surprising result from the droplet conditional analysis is that larger droplet travel faster than smaller ones. This dependence cannot be explained if the drag curves used do not take into account the high levels of turbulence present in the gas core in annular flow. If these are considered, then interesting new situations of multiplicity and stability of droplet terminal velocities are encountered. Also, the observed size-velocity relationship can be explained. A droplet deposition is formulated based on the particle inertia control. This permitted the calculation of rates of drop deposition directly from the droplet size and velocities data.

  6. Size and composition-controlled fabrication of VO2 nanocrystals...

    Office of Scientific and Technical Information (OSTI)

    by terminated cluster growth Citation Details In-Document Search Title: Size and composition-controlled fabrication of VO2 nanocrystals by terminated cluster growth You are ...

  7. Size and composition-controlled fabrication of VO2 nanocrystals...

    Office of Scientific and Technical Information (OSTI)

    by terminated cluster growth Citation Details In-Document Search Title: Size and composition-controlled fabrication of VO2 nanocrystals by terminated cluster growth A physical ...

  8. Neutrons measure phase behavior in pores at Angstrom size (Journal...

    Office of Scientific and Technical Information (OSTI)

    Nanoporous carbons can also serve as electrode material for supercapacitors and batteries. The researchers successfully determined that the most efficiently condensing pore size in ...

  9. Measuring the Raindrop Size Distribution, ARM's Efforts at Darwin...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the Raindrop Size Distribution, ARM's Efforts at Darwin and SGP Bartholomew, Mary Jane Brookhaven National Laboratory Category: Instruments ARM has purchased two impact...

  10. Solar Trackers Market - Global Industry Analysis, Size, Share...

    Open Energy Info (EERE)

    Solar Trackers Market - Global Industry Analysis, Size, Share, Growth, Trends and Forecast, 2010 - 2020 Home > Groups > Increase Natural Gas Energy Efficiency John55364's picture...

  11. Level: National Data; Row: Employment Sizes within NAICS Codes...

    U.S. Energy Information Administration (EIA) Indexed Site

    4 Consumption Ratios of Fuel, 2006; Level: National Data; Row: Employment Sizes within NAICS Codes; Column: Energy-Consumption Ratios; Unit: Varies. Consumption Consumption per ...

  12. Level: National Data; Row: Employment Sizes within NAICS Codes...

    U.S. Energy Information Administration (EIA) Indexed Site

    4 Consumption Ratios of Fuel, 2010; Level: National Data; Row: Employment Sizes within NAICS Codes; Column: Energy-Consumption Ratios; Unit: Varies. Consumption Consumption per ...

  13. TVA - Mid-Sized Renewable Standard Offer Program | Department...

    Broader source: Energy.gov (indexed) [DOE]

    kWh Summary The Tennessee Valley Authority (TVA) now compliments the small generation Green Power Providers Program by providing incentives for mid-sized renewable energy...

  14. SBA Increases Size Standards for Waste Remediation Services ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    a larger pool of small businesses to choose from for small business procurement ... An SBA-issued White Paper entitled, "Size Standards Methodology," which explains how SBA ...

  15. How to specify, design and maintain online process analyzers

    SciTech Connect (OSTI)

    Crandall, J.A. )

    1993-04-01

    In the vast majority of the CPI, determining the chemical compositions and physical properties of process materials has been the responsibility of the analytical laboratory. The chemistry or the operator periodically takes samples from the process that are carried to the lab for analysis. However, as global competitiveness, quality improvement and environmental concerns have grown in importance, process feedback must be quicker and more accurate than ever before. Customers are demanding that product lots be exactly the same, every time. Several analytical methods - gas chromatography, infrared and near-infrared spectroscopy - have successfully made the transition from the lab to the process line. Each method has its own price, accuracy, complexity and maintenance requirements. A thorough knowledge of this information and the teamwork required to install an economical and effective system is critical. The major parts of an online process analyzer are: the sampling apparatus, the analyzer itself, and the methods used for data correlation, reporting and communication. Care should be taken in the design and selection of each part. The paper discusses these major parts for gas chromatography and spectroscopy systems.

  16. On-line DNA analysis system with rapid thermal cycling

    DOE Patents [OSTI]

    Swerdlow, Harold P.; Wittwer, Carl T.

    1999-01-01

    An apparatus particularly suited for subjecting biological samples to any necessary sample preparation tasks, subjecting the sample to rapid thermal cycling, and then subjecting the sample to subsequent on-line analysis using one or more of a number of analytical techniques. The apparatus includes a chromatography device including an injection means, a chromatography pump, and a chromatography column. In addition, the apparatus also contains a capillary electrophoresis device consisting of a capillary electrophoresis column with an inlet and outlet end, a means of injection, and means of applying a high voltage to cause the differential migration of species of interest through the capillary column. Effluent from the liquid chromatography column passes over the inlet end of the capillary electrophoresis column through a tee structure and when the loading of the capillary electrophoresis column is desired, a voltage supply is activated at a precise voltage and polarity over a specific duration to cause sample species to be diverted from the flowing stream to the capillary electrophoresis column. A laser induced fluorescence detector preferably is used to analyze the products separated while in the electrophoresis column.

  17. On-line DNA analysis system with rapid thermal cycling

    DOE Patents [OSTI]

    Swerdlow, H.P.; Wittwer, C.T.

    1999-08-10

    This application describes an apparatus particularly suited for subjecting biological samples to any necessary sample preparation tasks, subjecting the sample to rapid thermal cycling, and then subjecting the sample to subsequent on-line analysis using one or more of a number of analytical techniques. The apparatus includes a chromatography device including an injection means, a chromatography pump, and a chromatography column. In addition, the apparatus also contains a capillary electrophoresis device consisting of a capillary electrophoresis column with an inlet and outlet end, a means of injection, and means of applying a high voltage to cause the differential migration of species of interest through the capillary column. Effluent from the liquid chromatography column passes over the inlet end of the capillary electrophoresis column through a tee structure and when the loading of the capillary electrophoresis column is desired, a voltage supply is activated at a precise voltage and polarity over a specific duration to cause sample species to be diverted from the flowing stream to the capillary electrophoresis column. A laser induced fluorescence detector preferably is used to analyze the products separated while in the electrophoresis column. 6 figs.

  18. Online residence time distribution measurement of thermochemical biomass pretreatment reactors

    SciTech Connect (OSTI)

    Sievers, David A.; Kuhn, Erik M.; Stickel, Jonathan J.; Tucker, Melvin P.; Wolfrum, Edward J.

    2015-11-03

    Residence time is a critical parameter that strongly affects the product profile and overall yield achieved from thermochemical pretreatment of lignocellulosic biomass during production of liquid transportation fuels. The residence time distribution (RTD) is one important measure of reactor performance and provides a metric to use when evaluating changes in reactor design and operating parameters. An inexpensive and rapid RTD measurement technique was developed to measure the residence time characteristics in biomass pretreatment reactors and similar equipment processing wet-granular slurries. Sodium chloride was pulsed into the feed entering a 600 kg/d pilot-scale reactor operated at various conditions, and aqueous salt concentration was measured in the discharge using specially fabricated electrical conductivity instrumentation. This online conductivity method was superior in both measurement accuracy and resource requirements compared to offline analysis. Experimentally measured mean residence time values were longer than estimated by simple calculation and screw speed and throughput rate were investigated as contributing factors. In conclusion, a semi-empirical model was developed to predict the mean residence time as a function of operating parameters and enabled improved agreement.

  19. Online residence time distribution measurement of thermochemical biomass pretreatment reactors

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Sievers, David A.; Kuhn, Erik M.; Stickel, Jonathan J.; Tucker, Melvin P.; Wolfrum, Edward J.

    2015-11-03

    Residence time is a critical parameter that strongly affects the product profile and overall yield achieved from thermochemical pretreatment of lignocellulosic biomass during production of liquid transportation fuels. The residence time distribution (RTD) is one important measure of reactor performance and provides a metric to use when evaluating changes in reactor design and operating parameters. An inexpensive and rapid RTD measurement technique was developed to measure the residence time characteristics in biomass pretreatment reactors and similar equipment processing wet-granular slurries. Sodium chloride was pulsed into the feed entering a 600 kg/d pilot-scale reactor operated at various conditions, and aqueous saltmore » concentration was measured in the discharge using specially fabricated electrical conductivity instrumentation. This online conductivity method was superior in both measurement accuracy and resource requirements compared to offline analysis. Experimentally measured mean residence time values were longer than estimated by simple calculation and screw speed and throughput rate were investigated as contributing factors. In conclusion, a semi-empirical model was developed to predict the mean residence time as a function of operating parameters and enabled improved agreement.« less

  20. Energy science and technology database (on the internet). Online data

    SciTech Connect (OSTI)

    1997-12-01

    The Energy Science and Technology Database (EDB) is a multidisciplinary file containing worldwide references to basic and applied scientific and technical research literature. The information is collected for use by government managers, researchers at the national laboratories, and other research efforts sponsored by the U.S. Department of Energy, and the results of this research are transferred to the public. Abstracts are included for records from 1976 to the present. The EDB also contains the Nuclear Science Abstracts which is a comprehensive abstract and index collection to the international nuclear science and technology literature for the period 1948 through 1976. Included are scientific and technical reports of the U.S. Atomic Energy Commission, U.S. Energy Research and Development Administration and its contractors, other agencies, universities, and industrial and research organizations. Approximately 25% of the records in the file contain abstracts. Nuclear Science Abstracts contains over 900,000 bibliographic records. The entire Energy Science and Technology Database contains over 3 million bibliographic records. This database is now available for searching through the GOV. Research-Center (GRC) service. GRC is a single online web-based search service to well known Government databases. Featuring powerful search and retrieval software, GRC is an important research tool. The GRC web site is at http://grc.ntis.gov.