National Library of Energy BETA

Sample records for on-highway off-highway construction

  1. Off-Highway Transportation-Related Fuel Use

    SciTech Connect (OSTI)

    Davis, S.C.

    2004-05-08

    The transportation sector includes many subcategories--for example, on-highway, off-highway, and non-highway. Use of fuel for off-highway purposes is not well documented, nor is the number of off-highway vehicles. The number of and fuel usage for on-highway and aviation, marine, and rail categories are much better documented than for off-highway land-based use. Several sources document off-highway fuel use under specific conditions--such as use by application (e.g., recreation) or by fuel type (e.g., gasoline). There is, however, no single source that documents the total fuel used off-highway and the number of vehicles that use the fuel. This report estimates the fuel usage and number of vehicles/equipment for the off-highway category. No new data have been collected nor new models developed to estimate the off-highway data--this study is limited in scope to using data that already exist. In this report, unless they are being quoted from a source that uses different terminology, the terms are used as listed below. (1) ''On-highway/on-road'' includes land-based transport used on the highway system or other paved roadways. (2) ''Off-highway/off-road'' includes land-based transport not using the highway system or other paved roadways. (3) ''Non-highway/non-road'' includes other modes not traveling on highways such as aviation, marine, and rail. It should be noted that the term ''transportation'' as used in this study is not typical. Generally, ''transportation'' is understood to mean the movement of people or goods from one point to another. Some of the off-highway equipment included in this study doesn't transport either people or goods, but it has utility in movement (e.g., a forklift or a lawn mower). Along these lines, a chain saw also has utility in movement, but it cannot transport itself (i.e., it must be carried) because it does not have wheels. Therefore, to estimate the transportation-related fuel used off-highway, transportation equipment is defined to include all devices that have wheels, can move or be moved from one point to another, and use fuel. An attempt has been made to exclude off-highway engines that do not meet all three of these criteria (e.g., chain saws and generators). The following approach was used to determine the current off-highway fuel use. First, a literature review was conducted to ensure that all sources with appropriate information would be considered. Secondly, the fuel use data available from each source were compiled and compared in so far as possible. Comparable data sets (i.e., same fuel type; same application) were evaluated. Finally, appropriate data sets were combined to provide a final tally.

  2. Fact #634: August 2, 2010 Off-highway Transportation-related Fuel Consumption

    Broader source: Energy.gov [DOE]

    The Environmental Protection Agency's NONROAD2008a model estimates fuel use for off-highway equipment. Construction and mining equipment using diesel fuel account for the majority of this fuel use....

  3. Off-Highway Heavy Vehicle Diesel Efficiency Improvement and Emissions...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Off-Highway Heavy Vehicle Diesel Efficiency Improvement and Emissions Reduction 2005 Diesel Engine Emissions Reduction (DEER) Conference Presentations and Posters PDF icon...

  4. Off-Highway Gasoline Consuption Estimation Models Used in the Federal Highway Administration Attribution Process: 2008 Updates

    SciTech Connect (OSTI)

    Hwang, Ho-Ling; Davis, Stacy Cagle

    2009-12-01

    This report is designed to document the analysis process and estimation models currently used by the Federal Highway Administration (FHWA) to estimate the off-highway gasoline consumption and public sector fuel consumption. An overview of the entire FHWA attribution process is provided along with specifics related to the latest update (2008) on the Off-Highway Gasoline Use Model and the Public Use of Gasoline Model. The Off-Highway Gasoline Use Model is made up of five individual modules, one for each of the off-highway categories: agricultural, industrial and commercial, construction, aviation, and marine. This 2008 update of the off-highway models was the second major update (the first model update was conducted during 2002-2003) after they were originally developed in mid-1990. The agricultural model methodology, specifically, underwent a significant revision because of changes in data availability since 2003. Some revision to the model was necessary due to removal of certain data elements used in the original estimation method. The revised agricultural model also made use of some newly available information, published by the data source agency in recent years. The other model methodologies were not drastically changed, though many data elements were updated to improve the accuracy of these models. Note that components in the Public Use of Gasoline Model were not updated in 2008. A major challenge in updating estimation methods applied by the public-use model is that they would have to rely on significant new data collection efforts. In addition, due to resource limitation, several components of the models (both off-highway and public-us models) that utilized regression modeling approaches were not recalibrated under the 2008 study. An investigation of the Environmental Protection Agency's NONROAD2005 model was also carried out under the 2008 model update. Results generated from the NONROAD2005 model were analyzed, examined, and compared, to the extent that is possible on the overall totals, to the current FHWA estimates. Because NONROAD2005 model was designed for emission estimation purposes (i.e., not for measuring fuel consumption), it covers different equipment populations from those the FHWA models were based on. Thus, a direct comparison generally was not possible in most sectors. As a result, NONROAD2005 data were not used in the 2008 update of the FHWA off-highway models. The quality of fuel use estimates directly affect the data quality in many tables published in the Highway Statistics. Although updates have been made to the Off-Highway Gasoline Use Model and the Public Use Gasoline Model, some challenges remain due to aging model equations and discontinuation of data sources.

  5. Fact #634: August 2, 2010 Off-highway Transportation-related...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Nearly all of the alternative fuel used in off-highway equipment is consumed by forklifts. Off-highway Transportation-related Fuel Consumption, 2008 Bar graph showing the 2008 ...

  6. Aftertreatment Technologies for Off-Highway Heavy-Duty Diesel Engines

    SciTech Connect (OSTI)

    Kass, M.D.

    2008-07-15

    The objective of this program was to explore a combination of advanced injection control and urea-selective catalytic reduction (SCR) to reduce the emissions of oxides of nitrogen (NOx) and particulate matter (PM) from a Tier 2 off-highway diesel engine to Tier 3 emission targets while maintaining fuel efficiency. The engine used in this investigation was a 2004 4.5L John Deere PowerTechTM; this engine was not equipped with exhaust gas recirculation (EGR). Under the original CRADA, the principal objective was to assess whether Tier 3 PM emission targets could be met solely by increasing the rail pressure. Although high rail pressure will lower the total PM emissions, it has a contrary effect to raise NOx emissions. To address this effect, a urea-SCR system was used to determine whether the enhanced NOx levels, associated with high rail pressure, could be reduced to Tier 3 levels. A key attraction for this approach is that it eliminates the need for a Diesel particulate filter (DPF) to remove PM emissions. The original CRADA effort was also performed using No.2 Diesel fuel having a maximum sulfur level of 500 ppm. After a few years, the CRADA scope was expanded to include exploration of advanced injection strategies to improve catalyst regeneration and to explore the influence of urea-SCR on PM formation. During this period the emission targets also shifted to meeting more stringent Tier 4 emissions for NOx and PM, and the fuel type was changed to ultra-low sulfur Diesel (ULSD) having a maximum sulfur concentration of 15 ppm. New discoveries were made regarding PM formation at high rail pressures and the influences of oxidation catalysts and urea-SCR catalysts. These results are expected to provide a pathway for lower PM and NOx emissions for both off- and on-highway applications. Industrial in-kind support was available throughout the project period. Review of the research results were carried out on a regular basis (annual reports and meetings) followed by suggestions for improvement in ongoing work and direction for future work. A significant portion of the industrial support was in the form of experimentation, data analysis, data exchange, and technical consultation.

  7. Hybrid 240 Ton Off Highway Haul Truck: Quarterly Technical Status Report 19, DOE/AL68080-TSR19

    SciTech Connect (OSTI)

    Tim Richter

    2007-06-30

    This nineteenth quarterly status report for the Hybrid Off Highway Vehicle (OHV) project, DOE Award DE-FC04-02AL68080 presents the project status at the end of June 2007, and covers activities in the nineteenth project quarter, April 2007 – June 2007.

  8. Advanced Hybrid Propulsion and Energy Management System for High Efficiency, Off Highway, 240 Ton Class, Diesel Electric Haul Trucks

    SciTech Connect (OSTI)

    Richter, Tim; Slezak, Lee; Johnson, Chris; Young, Henry; Funcannon, Dan

    2008-12-31

    The objective of this project is to reduce the fuel consumption of off-highway vehicles, specifically large tonnage mine haul trucks. A hybrid energy storage and management system will be added to a conventional diesel-electric truck that will allow capture of braking energy normally dissipated in grid resistors as heat. The captured energy will be used during acceleration and motoring, reducing the diesel engine load, thus conserving fuel. The project will work towards a system validation of the hybrid system by first selecting an energy storage subsystem and energy management subsystem. Laboratory testing at a subscale level will evaluate these selections and then a full-scale laboratory test will be performed. After the subsystems have been proven at the full-scale lab, equipment will be mounted on a mine haul truck and integrated with the vehicle systems. The integrated hybrid components will be exercised to show functionality, capability, and fuel economy impacts in a mine setting.

  9. ADOT Policy for Accommodating Utilities on Highway Rights-Of...

    Open Energy Info (EERE)

    Policy for Accommodating Utilities on Highway Rights-Of-Way Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: ADOT Policy for...

  10. The U.S. average retail price for on-highway diesel fuel rose...

    U.S. Energy Information Administration (EIA) Indexed Site

    The U.S. average retail price for on-highway diesel fuel rose this week The U.S. average retail price for on-highway diesel fuel rose slightly to 3.90 a gallon on Monday. That's ...

  11. 23 V.S.A. Section 1392 Gross Weight Limits on Highways | Open...

    Open Energy Info (EERE)

    Section 1392 Gross Weight Limits on HighwaysLegal Abstract Statute establishes the motor vehicle weight, load size, not to exceed 80,000 pounds without a permit. Published NA...

  12. Application for Permit to Construct Access Driveway Facilities...

    Open Energy Info (EERE)

    Permit to Construct Access Driveway Facilities on Highway ROW Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- Permit ApplicationPermit...

  13. Construction

    Broader source: Energy.gov [DOE]

    Learn about the energy-efficient construction projects that are saving businesses and communities money while creating jobs.

  14. ,"U.S. On-Highway Diesel Fuel Prices"

    U.S. Energy Information Administration (EIA) Indexed Site

    On-Highway Diesel Fuel Prices" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","W Diesel Prices - All Types",11,"Weekly","5/23/2016","3/21/1994" ,"Data 2","M Diesel Prices - All Types",11,"Monthly","4/2016","3/15/1994" ,"Data 3","W

  15. Diesel Fueled SOFC for Class 7/Class 8 On-Highway Truck Auxiliary Power

    SciTech Connect (OSTI)

    Vesely, Charles John-Paul; Fuchs, Benjamin S.; Booten, Chuck W.

    2010-03-31

    The following report documents the progress of the Cummins Power Generation (CPG) Diesel Fueled SOFC for Class 7/Class 8 On-Highway Truck Auxiliary Power (SOFC APU) development and final testing under the U.S. Department of Energy (DOE) Energy Efficiency and Renewable Energy (EERE) contract DE-FC36-04GO14318. This report overviews and summarizes CPG and partner development leading to successful demonstration of the SOFC APU objectives and significant progress towards SOFC commercialization. Significant SOFC APU Milestones: Demonstrated: Operation meeting SOFC APU requirements on commercial Ultra Low Sulfur Diesel (ULSD) fuel. SOFC systems operating on dry CPOX reformate. Successful start-up and shut-down of SOFC APU system without inert gas purge. Developed: Low cost balance of plant concepts and compatible systems designs. Identified low cost, high volume components for balance of plant systems. Demonstrated efficient SOFC output power conditioning. Demonstrated SOFC control strategies and tuning methods.

  16. A STUDY OF THE DISCREPANCY BETWEEN FEDERAL AND STATE MEASUREMENTS OF ON-HIGHWAY FUEL CONSUMPTION

    SciTech Connect (OSTI)

    Hwang, HL

    2003-08-11

    Annual highway fuel taxes are collected by the Treasury Department and placed in the Highway Trust Fund (HTF). There is, however, no direct connection between the taxes collected by the Treasury Department and the gallons of on-highway fuel use, which can lead to a discrepancy between these totals. This study was conducted to determine how much of a discrepancy exists between the total fuel usages estimated based on highway revenue funds as reported by the Treasury Department and the total fuel usages used in the apportionment of the HTF to the States. The analysis was conducted using data from Highway Statistics Tables MF-27 and FE-9 for the years 1991-2001. It was found that the overall discrepancy is relatively small, mostly within 5% difference. The amount of the discrepancy varies from year to year and varies among the three fuel types (gasoline, gasohol, special fuels). Several potential explanations for these discrepancies were identified, including issues on data, tax measurement, gallon measurement, HTF receipts, and timing. Data anomalies caused by outside forces, such as deferment of tax payments from one fiscal year to the next, can skew fuel tax data. Fuel tax evasion can lead to differences between actual fuel use and fuel taxes collected. Furthermore, differences in data collection and reporting among States can impact fuel use data. Refunds, credits, and transfers from the HTF can impact the total fuel tax receipt data. Timing issues, such as calendar year vs. fiscal year, can also cause some discrepancy between the two data sources.

  17. Distillate Fuel Oil Sales for Off-Highway Use

    U.S. Energy Information Administration (EIA) Indexed Site

    1,985,592 2,148,677 2,070,260 2,088,157 2,063,319 2,014,184 1984-2014 East Coast (PADD 1) 605,884 615,812 634,470 621,261 584,856 604,093 1984-2014 New England (PADD 1A) 81,453...

  18. Off-Highway Heavy Vehicle Diesel Efficiency Improvement and Emissions

    Broader source: Energy.gov (indexed) [DOE]

    Reduction | Department of Energy 05 Diesel Engine Emissions Reduction (DEER) Conference Presentations and Posters PDF icon 2005_deer_rumsey.pdf More Documents & Publications High Engine Efficiency at 2010 Emissions Integrated Engine and Aftertreatment Technology Roadmap for EPA 2010 Heavy-duty Emissions Regulations Optimization of Engine-out Emissions from a Diesel Engine to Meet Tier 2 Bin 5 Emission Limits

  19. Fuel oil and kerosene sales 1997

    SciTech Connect (OSTI)

    1998-08-01

    The Fuel Oil and Kerosene Sales 1997 report provides information, illustrations and state-level statistical data on end-use sales of kerosene; No. 1, No. 2, and No. 4 distillate fuel oil; and residual fuel oil. State-level kerosene sales include volumes for residential, commercial, industrial, farm, and all other uses. State-level distillate sales include volumes for residential, commercial, industrial, oil company, railroad, vessel bunkering, military, electric utility, farm, on-highway, off highway construction, and other uses. State-level residual fuel sales include volumes for commercial, industrial, oil company, vessel bunkering, military, electric utility, and other uses. 24 tabs.

  20. Heavy-Duty Stoichiometric Compression Ignition Engine with Improved Fuel Economy over Alternative Technologies for Meeting 2010 On-Highway Emission

    SciTech Connect (OSTI)

    Kirby J. Baumgard; Richard E. Winsor

    2009-12-31

    The objectives of the reported work were: to apply the stoichiometric compression ignition (SCI) concept to a 9.0 liter diesel engine; to obtain engine-out NO{sub x} and PM exhaust emissions so that the engine can meet 2010 on-highway emission standards by applying a three-way catalyst for NO{sub x} control and a particulate filter for PM control; and to simulate an optimize the engine and air system to approach 50% thermal efficiency using variable valve actuation and electric turbo compounding. The work demonstrated that an advanced diesel engine can be operated at stoichiometric conditions with reasonable particulate and NOx emissions at full power and peak torque conditions; calculated that the SCI engine will operate at 42% brake thermal efficiency without advanced hardware, turbocompounding, or waste heat recovery; and determined that EGR is not necessary for this advanced concept engine, and this greatly simplifies the concept.

  1. Exhaust Aftertreatment and Low Pressure Loop EGR Applied to an Off-Highway

    Broader source: Energy.gov (indexed) [DOE]

    Winning Projects | Department of Energy PDF icon rd100_winners_webinar_20160121.pdf More Documents & Publications Whole Algae Hydrothermal Liquefaction Technology Pathway Whole Algae Hydrothermal Liquefaction Thermochemical Conversion Proceeses to Aviation Fuels

    Document covers the extracted pages of Executive Order 12123. PDF icon eo13123.pdf More Documents & Publications EO 13123-Greening the Government Through Efficient Energy Management Project Reports for Yukon-Kuskokwim

  2. Project Construction

    Office of Energy Efficiency and Renewable Energy (EERE)

    Integrating renewable energy into Federal new construction or major renovations requires effective structuring of the construction team and project schedule. This overview discusses key construction team considerations for renewable energy as well as timing and expectations for the construction phase. The project construction phase begins after a project is completely designed and the construction documents (100%) have been issued. Construction team skills and experience with renewable energy technologies are crucial during construction, as is how the integration of renewable energy affects the project construction schedule.

  3. New Construction

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Commercial Program Development Commercial Current Promotions Industrial Federal Agriculture Commercial new construction projects may be eligible to receive reimbursements...

  4. Electrochemical construction

    DOE Patents [OSTI]

    Einstein, Harry; Grimes, Patrick G.

    1983-08-23

    An electrochemical cell construction features a novel co-extruded plastic electrode in an interleaved construction with a novel integral separator-spacer. Also featured is a leak and impact resistant construction for preventing the spill of corrosive materials in the event of rupture.

  5. Fuel oil and kerosene sales 1996

    SciTech Connect (OSTI)

    1997-08-01

    The Fuel Oil and Kerosene Sales 1996 report provides information, illustrations and State-level statistical data on end-use sales of kerosene; No. 1, No. 2, and No. 4 distillate fuel oil; and residual fuel oil. State-level kerosene sales include volumes for residential, commercial, industrial, farm, and all other uses. State-level distillate sales include volumes for residential, commercial, industrial, oil company, railroad, vessel bunkering, military, electric utility, farm, on-highway, off highway construction, and other uses. State-level residual fuel sales include volumes for commercial, industrial, oil company, vessel bunkering, military, electric utility, and other uses. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Fuel Oil and Kerosene Sales 1996. 24 tabs.

  6. Construction Certifications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Certifications Individual Permit: Construction Certifications Enhanced control measures were designed and installed at 67 Sites in 42 SMAs in 2012. Contact Environmental...

  7. Yongshan County Yonggu Construction and Construction Material...

    Open Energy Info (EERE)

    Yongshan County Yonggu Construction and Construction Material Co Ltd Jump to: navigation, search Name: Yongshan County Yonggu Construction and Construction Material Co., Ltd....

  8. Construction Certifications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Certifications Individual Permit: Construction Certifications Enhanced control measures were designed and installed at 67 Sites in 42 SMAs in 2012. Contact Environmental Communication & Public Involvement P.O. Box 1663 MS M996 Los Alamos, NM 87545 (505) 667-0216 Email Construction Certifications Enhanced Controls SMA Submittal Date and Letter Certification Document 2M-SMA-1 July 25, 2012 (see document for submittal letter and certification) Submittal of Certification of Installation of

  9. NIF Construction

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NIF Construction After careful preparation, a giant rotating crane lifted the NIF target chamber and gently placed it in the Target Bay, a breathtaking event that took only about 30 minutes. Building the World's Largest Laser Planning for NIF began in the early 1990s, and ground was broken on May 29, 1997. Energy Secretary Federico Peña said at the groundbreaking: "NIF will unleash the power of the heavens to make Earth a better place." To prepare the site for construction, more than

  10. PUMP CONSTRUCTION

    DOE Patents [OSTI]

    Strickland, G.; Horn, F.L.; White, H.T.

    1960-09-27

    A pump which utilizes the fluid being pumped through it as its lubricating fluid is described. This is achieved by means of an improved bearing construction in a pump of the enclosed or canned rotor type. At the outlet end of the pump, adjacent to an impeller mechanism, there is a bypass which conveys some of the pumped fluid to a chamber at the inlet end of the pump. After this chamber becomes full, the pumped fluid passes through fixed orifices in the top of the chamber and exerts a thrust on the inlet end of the pump rotor. Lubrication of the rotor shaft is accomplished by passing the pumped fluid through a bypass at the outlet end of the rotor shaft. This bypass conveys Pumped fluid to a cooling means and then to grooves on the surface of the rotor shait, thus lubricating the shaft.

  11. Career Map: Construction Worker

    Broader source: Energy.gov [DOE]

    The Wind Program's Career Map provides job description information for Construction Worker positions.

  12. Call center construction underway

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    only two weeks on the job, "design and construction work is in high gear," said Charlie Moore, MK Construction Manager. The 62,000-square-foot facility at 3111 National Parks...

  13. Construction Safety Advisory Committee

    Broader source: Energy.gov [DOE]

    This charter describes the function and role of the Department of Energy (DOE) Construction Safety Advisory Committee (CSAC).

  14. Fortis Construction Inc.

    Energy Savers [EERE]

    Rob Fallow, Senior Project Manager Fortis Construction Portland, Oregon, USA Market Sectors Commercial Data Centers Healthcare Higher Education Pricing Major...

  15. Construction | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Construction Two major construction projects are underway at Jefferson Lab - the 12 GeV Upgrade and the Technology & Engineering Development Facility (TEDF). Under the $310 million 12 GeV project, the lab is upgrading facilities in the existing three experimental halls and constructing a fourth experiment hall, Hall D. The project is scheduled to be completed in 2015 and will provide researchers with state-of-the art facilities to advance science in support of national goals. The $72 million

  16. Construction Control Representative

    Broader source: Energy.gov [DOE]

    (See Frequently Asked Questions for more information). Where would I be working? Western Area Power Administration Rocky Mountain Region Engineering and Construction Field Engineering, (J5600) 5555...

  17. Owens Construction | Open Energy Information

    Open Energy Info (EERE)

    Construction Jump to: navigation, search Name: Owens Construction Place: Powell, OH Website: www.owensconstruction.com References: Owens Construction1 Information About...

  18. Rezac Construction | Open Energy Information

    Open Energy Info (EERE)

    Rezac Construction Jump to: navigation, search Name: Rezac Construction Place: Lincoln, NE Website: www.rezacconstruction.com References: Rezac Construction 1 Information About...

  19. Wanzek Construction | Open Energy Information

    Open Energy Info (EERE)

    Wanzek Construction Jump to: navigation, search Logo: Wanzek Construction Name: Wanzek Construction Address: 2028 2nd Avenue NW Place: West Fargo, ND Country: United States Zip:...

  20. No. 2 Diesel Sales for On-Highway Use

    U.S. Energy Information Administration (EIA) Indexed Site

    34,147,806 35,582,625 36,160,308 36,343,072 37,330,008 38,533,391 1984-2014 East Coast (PADD 1) 9,929,426 10,367,337 10,332,863 10,257,620 10,666,085 10,693,223 1984-2014 New...

  1. Retail Prices for Diesel (On-Highway) - All Types

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2.235 2.211 1994-2016 East Coast (PADD1) 2.455 2.413 2.372 2.318 2.279 2.260 1994-2016 New England (PADD 1A) 2.527 2.515 2.453 2.397 2.365 2.344 1997-2016 Central Atlantic (PADD...

  2. Eaton Aftertreatment System (EAS) for On-Highway Diesel Engines |

    Broader source: Energy.gov (indexed) [DOE]

    The data dashboard for Eagle County, Colorado, a partner in the Better Buildings Neighborhood Program. File Eagle County Data Dashboard More Documents & Publications Austin Energy Data Dashboard Massachusetts -- SEP Data Dashboard Phoenix, Arizona Data Dashboard

    Summary of data reported by Better Buildings Neighborhood Program partner Eagle County, Colorado. PDF icon Eagle County, Colorado Summary of Reported Data More Documents & Publications Virginia -- SEP Summary of Reported Data

  3. Passive solar construction handbook

    SciTech Connect (OSTI)

    Levy, E.; Evans, D.; Gardstein, C.

    1981-08-01

    Many of the basic elements of passive solar design are reviewed. The unique design constraints presented in passive homes are introduced and many of the salient issues influencing design decisions are described briefly. Passive solar construction is described for each passive system type: direct gain, thermal storage wall, attached sunspace, thermal storage roof, and convective loop. For each system type, important design and construction issues are discussed and case studies illustrating designed and built examples of the system type are presented. Construction details are given and construction and thermal performance information is given for the materials used in collector components, storage components, and control components. Included are glazing materials, framing systems, caulking and sealants, concrete masonry, concrete, brick, shading, reflectors, and insulators. The Load Collector Ratio method for estimating passive system performance is appended, and other analysis methods are briefly summarized. (LEW)

  4. New Construction Program

    Broader source: Energy.gov [DOE]

    NOTE: On March 2016, NYSERDA revised the Commercial New Construction program (PON 1601) extending the program through December 29, 2017, or until the funds are fully committed. 

  5. UMC Construction Waste (4493)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    collect all Construction waste identified in 2006 and excess through plant sales, recycle through plant scrap metal recycle program, dispose in Y-12 on-site landfill, or ship to...

  6. Genomic library construction

    DOE Patents [OSTI]

    Church, George M.; Zhang, Kun

    2011-07-26

    Compositions and methods for amplifying nucleic acid sequences from a single cell are provided. Compositions and methods for constructing a genomic library from a single cell are also provided.

  7. Construction Readiness RM

    Broader source: Energy.gov [DOE]

    The authorization to proceed with construction of a new facility is given at the CD-3 phase of the project management cycle, after completion of the final design. Between CD-3 and CD-4 stages of...

  8. Residential New Construction Program

    Broader source: Energy.gov [DOE]

    The Residential New Construction Program includes two levels that can be achieved by completing various energy efficiency measures: Base Level and High Performance Level. Projects meeting the req...

  9. Page Under Construction | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Page Under Construction Page Under Construction This page is currently under construction.

  10. Construction Schedule | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Construction Schedule Current Projects 27-ID and 35-ID APS Vibration Reporting Protocol Summary of Construction Equipment Tests and Activities Jan 2014 Past Projects APCF LOM438...

  11. Metric Construction | Open Energy Information

    Open Energy Info (EERE)

    Metric Construction Jump to: navigation, search Name: Metric Construction Place: Boston, MA Information About Partnership with NREL Partnership with NREL Yes Partnership Type Test...

  12. Martifer Construction | Open Energy Information

    Open Energy Info (EERE)

    Construction Jump to: navigation, search Name: Martifer Construction Place: Oliveira de Frades, Portugal Zip: 3684-909 Sector: Services, Solar, Wind energy Product: Portugal-based...

  13. Toward a constructive physics

    SciTech Connect (OSTI)

    Noyes, H.P.; Gefwert, C.; Manthey, M.J.

    1983-06-01

    We argue that the discretization of physics which has occurred thanks to the advent of quantum mechanics has replaced the continuum standards of time, length and mass which brought physics to maturity by counting. The (arbitrary in the sense of conventional dimensional analysis) standards have been replaced by three dimensional constants: the limiting velocity c, the unit of action h, and either a reference mass (eg m/sub p/) or a coupling constant (eg G related to the mass scale by hc/(2..pi..Gm/sub p//sup 2/) approx. = 1.7 x 10/sup 38/). Once these physical and experimental reference standards are accepted, the conventional approach is to connect physics to mathematics by means of dimensionless ratios. But these standards now rest on counting rather than ratios, and allow us to think of a fourth dimensionless mathematical concept, which is counting integers. According to constructive mathematics, counting has to be understood before engaging in the practice of mathematics in order to avoid redundancy. In its strict form constructive mathematics allows no completed infinities, and must provide finite algorithms for the computation of any acceptable concept. This finite requirement in constructive mathematics is in keeping with the practice of physics when that practice is restricted to hypotheses which are testable in a finite time. In this paper we attempt to outline a program for physics which will meet these rigid criteria while preserving, in so far as possible, the successes that conventional physics has already achieved.

  14. 2015 Construction Safety Workshop Presentations

    Broader source: Energy.gov [DOE]

    2015 Construction Safety Workshop Presentations, June 16, 2015 - Forrestal Building - Washington, DC

  15. Calutron construction | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    construction Calutron construction Construction workers pour the concrete floor and footers for a Y-12 Calutron process building

  16. SF6432-CN Construction

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7/31/13 Page 1 of 31 Printed copies of this document are uncontrolled. Retrieve latest version electronically. SANDIA CORPORATION SF 6432-CN (07/2013) Section II STANDARD TERMS AND CONDITIONS FOR FIRM-FIXED PRICE COMMERCIAL CONSTRUCTION CONTRACTS THE FOLLOWING CLAUSES APPLY TO THIS CONTRACT AS INDICATED UNLESS SPECIFICALLY DELETED, OR EXCEPT TO THE EXTENT THEY ARE SPECIFICALLY SUPPLEMENTED OR AMENDED IN WRITING IN THE COVER PAGE OR SECTION I. (CTRL+CLICK ON A LINK BELOW TO ADVANCE DIRECTLY TO

  17. Construction Readiness RM

    Office of Environmental Management (EM)

    Construction Readiness Review Module March 2010 CD- [This Rev Readiness -0 view Module w s Review (CRR OFFICE O CD-1 was used to dev R). This Review OF ENVIRO Standard R Construc Rev Critical D CD-2 M velop the Revie w Module cont ONMENTA Review Pla ction Rea view Modul Decision (CD C March 2010 ew Plan for Sal tains the lesson Review.] AL MANAG an (SRP) adiness le D) Applicabili D-3 lt Waste Proce ns learned from GEMENT ity CD-4 ssing Facility ( m the SWPF Co Post Ope (SWPF) Const onstruction

  18. Total Adjusted Sales of Distillate Fuel Oil

    U.S. Energy Information Administration (EIA) Indexed Site

    End Use: Total Residential Commercial Industrial Oil Company Farm Electric Power Railroad Vessel Bunkering On-Highway Military Off-Highway All Other Period: Annual Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes Show Data By: End Use Area 2009 2010 2011 2012 2013 2014 View History U.S. 55,664,448 58,258,830 59,769,444 57,512,994 58,675,008 61,890,990 1984-2014 East Coast (PADD 1) 18,219,180 17,965,794 17,864,868 16,754,388

  19. Total Sales of Distillate Fuel Oil

    U.S. Energy Information Administration (EIA) Indexed Site

    End Use: Total Residential Commercial Industrial Oil Company Farm Electric Power Railroad Vessel Bunkering On-Highway Military Off-Highway All Other Period: Annual Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes Show Data By: End Use Area 2009 2010 2011 2012 2013 2014 View History U.S. 54,100,092 56,093,645 57,082,558 57,020,840 58,107,155 60,827,930 1984-2014 East Coast (PADD 1) 17,821,973 18,136,965 17,757,005 17,382,566

  20. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    U.S. Weekly Products Supplied Definitions Key Terms Definition Barrel A unit of volume equal to 42 U.S. gallons. Distillate Fuel Oil A general classification for one of the petroleum fractions produced in conventional distillation operations. It includes diesel fuels and fuel oils. Products known as No. 1, No. 2, and No. 4 diesel fuel are used in on-highway diesel engines, such as those in trucks and automobiles, as well as off-highway engines, such as those in railroad locomotives and

  1. construction | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Home construction Y-12 employee engineering success for group that serves people with disabilities in East Tennessee Jennifer Enderson, president of Emory Valley Center, and Bill Hevrdeys look over plans for the new facility. Bill Hevrdeys, a Consolidated Nuclear Security Construction engineer who has worked at Y-12 for more than 12 years, has worked on hundreds of construction projects all over the... NNSA's Asset Management Program Completes First Pilot The National Nuclear Security

  2. Chapter 8: Constructing the Building

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... 2002) Green Building Materials: A Guide to Product Selection and Specification, Ross Spiegel and Dru Meadows, John Wiley & Sons, 1999. "Construction Specifications" by Donald ...

  3. Hackney Construction | Open Energy Information

    Open Energy Info (EERE)

    to: navigation, search Name: Hackney Construction Address: 309 Farrens Creek LanePO Box 13 Place: Grangeville, Idaho Zip: 83530 Region: Rockies Area Sector: Solar Product:...

  4. Design & Construct New Buildings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Design & Construct New Buildings Design & Construct New Buildings Photo of NREL's Research Support Facility under construction, with two workers straddling I-beams. Establishing ...

  5. TSD Custom Construction | Open Energy Information

    Open Energy Info (EERE)

    TSD Custom Construction Jump to: navigation, search Name: TSD Custom Construction Place: Madison, WI Website: www.tsdcustomconstruction.com References: TSD Custom Construction1...

  6. Construction Begins | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Construction Begins Construction Begins Workers drill down to bedrock for the pouring of Y-12 building footers as construction begins in 1942...

  7. OTEC large systems construction techniques

    SciTech Connect (OSTI)

    Not Available

    1981-01-01

    Requirements for the construction and installation of various types of 400 MWe OTEC commercial size platforms and cold water pipes are presented. The capability of the state of the art in Technologies and Facilities, to satisfy the requirements of OTEC commercial plant construction and installation are assessed.

  8. Compositions of constructed microbial mats

    DOE Patents [OSTI]

    Bender, Judith A.; Phillips, Peter C.

    1999-01-01

    Compositions and methods of use of constructed microbial mats, comprising cyanobacteria and purple autotrophic bacteria and an organic nutrient source, in a laminated structure, are described. The constructed microbial mat is used for bioremediation of different individual contaminants and for mixed or multiple contaminants, and for production of beneficial compositions and molecules.

  9. Heilongjiang Province Water Transportation Construction | Open...

    Open Energy Info (EERE)

    Construction Jump to: navigation, search Name: Heilongjiang Province Water Transportation Construction Place: Harbin, Heilongjiang Province, China Sector: Hydro Product: China...

  10. Passive-solar construction handbook

    SciTech Connect (OSTI)

    Levy, E.; Evans, D.; Gardstein, C.

    1981-02-01

    Many of the basic elements of passive solar design are reviewed. Passive solar construction is covered according to system type, each system type discussion including a general discussion of the important design and construction issues which apply to the particular system and case studies illustrating designed and built examples of the system type. The three basic types of passive solar systems discussed are direct gain, thermal storage wall, and attached sunspace. Thermal performance and construction information is presented for typical materials used in passive solar collector components, storage components, and control components. Appended are an overview of analysis methods and a technique for estimating performance. (LEW)

  11. Itogumi Construction | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name: Itogumi Construction Place: Hokkaido, Japan Zip: 060-8554 Product: Japan-based engineering contractor. It set up a PV module joint venture with...

  12. Career Map: Construction Manager | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Construction Manager Career Map: Construction Manager A construction manager in a yellow safety vest instructs his team on proper wind turbine installation. Construction Manager Position Title Construction Manager Alternate Title(s) Foreman, Construction Supervisor Education & Training Level Bachelor's degree preferred, but not always required Education & Training Level Description Employers increasingly prefer candidates with both construction experience and a bachelor's degree in a

  13. construction

    National Nuclear Security Administration (NNSA)

    insulated roofs and more energy efficient HVAC systems.  The cool roof has high solar reflectance, so it emits absorbed solar radiation back into the atmosphere, which...

  14. Cogeneration project slated for construction

    SciTech Connect (OSTI)

    Not Available

    1993-09-13

    Destec Energy Inc. plans to begin construction of a 212-Mw gas-fired cogeneration plant in Polk County, Fla., late this year. The Houston-based firm will perform engineering and constructionmanagement services for the $150-million, combined-cycle project, but will call for proposals for construction services later this year, says project manager Bob Taylor. The plant north of Tampa, is scheduled to go on line in early 1995. All its electrical output will be sold to Florida Power Co. under a 30-year contract and process steam will go to the host, US Agrichemical Co., a large phosphate producer and fertilizer manufacturer.

  15. SUN (re)construction | Open Energy Information

    Open Energy Info (EERE)

    SUN (re)construction Jump to: navigation, search Logo: SUN (re)construction Name: SUN (re)construction Address: 1351 Harker Avenue Place: Palo Alto, California Zip: 94301 Region:...

  16. EDIG Construction Management | Open Energy Information

    Open Energy Info (EERE)

    Name: EDIG Construction Management Place: Israel Product: String representation "E.D.I.G. is a p ... pment projects." is too long. References: EDIG Construction Management1...

  17. Toyo Construction Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Co Ltd Jump to: navigation, search Name: Toyo Construction Co Ltd Place: Tokyo, Tokyo, Japan Product: Technical engineers and construction firm which worked with Fuji Electric on...

  18. Hanford Construction Workers Needs Assessment | Department of...

    Energy Savers [EERE]

    Needs Assessment Hanford Construction Workers Needs Assessment October 1997 This Needs Assessment for former Hanford construction workers was developed for the purpose of...

  19. China Nuclear Engineering Construction Corporation CNEC | Open...

    Open Energy Info (EERE)

    Nuclear Engineering Construction Corporation CNEC Jump to: navigation, search Name: China Nuclear Engineering & Construction Corporation (CNEC) Place: Beijing, China Zip: 100840...

  20. Texas Beachfront Construction Webpage | Open Energy Information

    Open Energy Info (EERE)

    Construction Webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Texas Beachfront Construction Webpage Author Texas General Land Office Published...

  1. Anaheim Public Utilities - Commercial & Industrial New Construction...

    Broader source: Energy.gov (indexed) [DOE]

    Utilities (APU) offers commercial, industrial, and institutional customers the New Construction Incentives Program to offset construction and installation costs of energy...

  2. SEPCOIII Electric Power Construction Corporation | Open Energy...

    Open Energy Info (EERE)

    SEPCOIII Electric Power Construction Corporation Jump to: navigation, search Name: SEPCOIII Electric Power Construction Corporation Place: China Zip: 266100 Sector: Services...

  3. Ruihua Construction Corporation RHC | Open Energy Information

    Open Energy Info (EERE)

    Ruihua Construction Corporation RHC Jump to: navigation, search Name: Ruihua Construction Corporation (RHC) Place: Shenzhen, Guangdong Province, China Zip: 518040 Sector: Solar...

  4. Qinghai Huanghe Zhongxing Hydropower Construction Development...

    Open Energy Info (EERE)

    Zhongxing Hydropower Construction Development Co Ltd Jump to: navigation, search Name: Qinghai Huanghe Zhongxing Hydropower Construction Development Co., Ltd Place: Qinghai...

  5. Consolidated Construction Consortium Ltd | Open Energy Information

    Open Energy Info (EERE)

    Consolidated Construction Consortium Ltd Jump to: navigation, search Name: Consolidated Construction Consortium Ltd Place: Chennai - 600 004., Tamil Nadu, India Zip: 600004 Sector:...

  6. Econnect Construction Ltd | Open Energy Information

    Open Energy Info (EERE)

    Econnect Construction Ltd Jump to: navigation, search Name: Econnect Construction Ltd Place: Northumberland, United Kingdom Zip: NE46 3PU Sector: Renewable Energy Product:...

  7. Colorado Construction Dewatering General Permit | Open Energy...

    Open Energy Info (EERE)

    Colorado Construction Dewatering General Permit Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: Colorado Construction Dewatering...

  8. Nor-son Construction | Open Energy Information

    Open Energy Info (EERE)

    Nor-son Construction Jump to: navigation, search Name: Nor-son Construction Place: Fargo, ND Information About Partnership with NREL Partnership with NREL Yes Partnership Type Test...

  9. GreenTech Construction | Open Energy Information

    Open Energy Info (EERE)

    GreenTech Construction Jump to: navigation, search Name: GreenTech Construction Address: 7591 Perry Rd. Place: Delaware, Ohio Zip: 43015 Sector: Buildings, Efficiency Phone Number:...

  10. (Electric and Gas) Residential New Construction Program

    Broader source: Energy.gov [DOE]

    The Energize CT offers a program designed to encourage the construction of energy efficient homes. The Residential New Construction Program offers incentives targeted at increasing energy...

  11. Riverside Public Utilities- Energy Efficiency Construction Incentive

    Broader source: Energy.gov [DOE]

    Riverside Public Utilities' (RPU) Commercial New Construction Incentives are designed to encourage owners/developers to invest in energy efficient designs in new construction, building expansion...

  12. Construction Kickoff Meeting Agenda | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Construction Kickoff Meeting Agenda Construction Kickoff Meeting Agenda Document serves as a standard agenda for the construction kickoff meeting. File Download the Construction Kickoff Meeting Agenda. More Documents & Publications Investment-Grade Audit Kickoff Meeting Sample Agenda Agenda: Preliminary Assessment Kickoff Meeting FEMP ESPC Project Development Resource Guide

  13. Construction of file database management

    SciTech Connect (OSTI)

    MERRILL,KYLE J.

    2000-03-01

    This work created a database for tracking data analysis files from multiple lab techniques and equipment stored on a central file server. Experimental details appropriate for each file type are pulled from the file header and stored in a searchable database. The database also stores specific location and self-directory structure for each data file. Queries can be run on the database according to file type, sample type or other experimental parameters. The database was constructed in Microsoft Access and Visual Basic was used for extraction of information from the file header.

  14. IID Energy- New Construction Energy Efficiency Program

    Broader source: Energy.gov [DOE]

     IID’s New Construction Energy Efficiency Program (NCEEP) is a non-residential new construction and renovation energy efficiency program that combines an integrated design process with financial...

  15. Construction Consultants, L.I., Inc.

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Eric Baumack Senior Project Manager Construction Consultants L.I., Inc. 36 East 2 nd ... to Construction Consultants L.I., Inc. (CCLI) at the Brookhaven National Laboratory (BNL). ...

  16. Pre-Construction Notification | Open Energy Information

    Open Energy Info (EERE)

    Construction Notification Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: Pre-Construction NotificationLegal Published NA Year...

  17. Constructing a Cleaner Economy Info Graphic

    Broader source: Energy.gov [DOE]

    An overview of the impact that the clean energy economy is having on the U.S. construction industry.

  18. GC GUIDANCE ON MINOR CONSTRUCTION THRESHOLDS

    Energy Savers [EERE]

    GUIDANCE ON MINOR CONSTRUCTION THRESHOLDS We have been asked about how the Department implements what is known as the "minor construction threshold," which limits the amount of certain funds that can be spent on minor construction projects that are not specifically authorized by law. This Guidance is intended to clarify both the applicable law and Department policy. The Secretary's authority to carry out construction projects is subject to several limitations in the Atomic Energy

  19. NREL: Environment, Health, and Safety - Construction Subcontractors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Documents Environment, Health, and Safety Printable Version Construction Subcontractors Documents The purpose of this page is to ensure NREL Environment, Health and Safety (EH&S) requirements are understood by construction subcontractors and incorporated into their planning, procurement, and execution of construction work activities at NREL. It is important that all construction subcontractors and their lower-tiers subcontractors familiarize themselves with these requirements before

  20. Montana Construction Dewatering General Permit Application Information...

    Open Energy Info (EERE)

    overview of Construction Dewatering General Permit process. Author Montana Department of Environmental Quality - Water Protection Bureau Published Montana Department of...

  1. Method of constructing an improved electrochemical cell

    DOE Patents [OSTI]

    Grimes, Patrick G.; Einstein, Harry

    1984-10-09

    An electrochemical cell construction features a novel co-extruded plastic electrode in an interleaved construction with a novel integral separator-spacer. Also featured is a leak and impact resistant construction for preventing the spill of corrosive materials in the event of rupture.

  2. MHD Electrode and wall constructions

    DOE Patents [OSTI]

    Way, Stewart; Lempert, Joseph

    1984-01-01

    Electrode and wall constructions for the walls of a channel transmitting the hot plasma in a magnetohydrodynamic generator. The electrodes and walls are made of a plurality of similar modules which are spaced from one another along the channel. The electrodes can be metallic or ceramic, and each module includes one or more electrodes which are exposed to the plasma and a metallic cooling bar which is spaced from the plasma and which has passages through which a cooling fluid flows to remove heat transmitted from the electrode to the cooling bar. Each electrode module is spaced from and electrically insulated from each adjacent module while interconnected by the cooling fluid which serially flows among selected modules. A wall module includes an electrically insulating ceramic body exposed to the plasma and affixed, preferably by mechanical clips or by brazing, to a metallic cooling bar spaced from the plasma and having cooling fluid passages. Each wall module is, similar to the electrode modules, electrically insulated from the adjacent modules and serially interconnected to other modules by the cooling fluid.

  3. National Ignition Facility wet weather construction plan

    SciTech Connect (OSTI)

    Kugler, A N

    1998-01-01

    This report presents a wet weather construction plan for the National Ignition Facility (NIF) construction project. Construction of the NIF commenced in mid- 1997, and excavation of the site was completed in the fall. Preparations for placing concrete foundations began in the fall, and above normal rainfall is expected over the tinter. Heavy rainfall in late November impacted foundation construction, and a wet weather construction plan was determined to be needed. This wet weather constiction plan recommends a strategy, techniques and management practices to prepare and protect the site corn wet weather effects and allow construction work to proceed. It is intended that information in this plan be incorporated in the Stormwater Pollution Prevention Plan (SWPPP) as warranted.

  4. Example Cost Codes for Construction Projects

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-28

    This chapter provides an example outline of cost items and their corresponding cost codes that may be used for construction projects.

  5. ODEQ - Construction Stormwater Best Management Practices Manual...

    Open Energy Info (EERE)

    Best Management Practices Manual Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: ODEQ - Construction Stormwater...

  6. Catawba County- Green Construction Permitting Incentive Program

    Broader source: Energy.gov [DOE]

    Catawba County is providing incentives to encourage the construction of sustainably built homes and commercial buildings. Rebates on permit fees and plan reviews are available for certain...

  7. OMEGA EP Construction - Laboratory for Laser Energetics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Construction - Laboratory for Laser Energetics Laboratory for Laser Energetics Logo Search Home Around the Lab Past Issues Past Quick Shots About Office of the Director Map to LLE ...

  8. CXD 4606, 9831 Wall Construction Project (4606)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9831 Wall Construction Project (4606) Y-12 Site Office Oak Ridge, Anderson County, Tennessee The proposed action is to upgrade of the existing contamination area associated with an...

  9. Nevada Construction Stormwater Factsheet | Open Energy Information

    Open Energy Info (EERE)

    sheet for Nevada's General Storm Water Construction Permit. Author Nevada Division of Environmental Protection Published NDEP, 2007 DOI Not Provided Check for DOI availability:...

  10. Washington Environmental Permit Handbook - NPDES Construction...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: Washington Environmental Permit Handbook - NPDES Construction Stormwater...

  11. ODEQ - Construction Stormwater Application and Forms Manual ...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: ODEQ - Construction Stormwater Application and Forms ManualPermitting...

  12. Satluj Constructions Ltd | Open Energy Information

    Open Energy Info (EERE)

    Ltd. Place: Chandigarh, Himachal Pradesh, India Sector: Hydro Product: Chandigarh-based small hydro project developer. References: Satluj Constructions Ltd.1 This article is a...

  13. FAQS Reference Guide – Construction Management

    Broader source: Energy.gov [DOE]

    This reference guide addresses the competency statements in the March 2004 edition of DOE-STD-1180-2004, Construction Management Functional Area Qualification Standard.

  14. Colorado Air Pollution Control Division - Construction Permits...

    Open Energy Info (EERE)

    Pollution Control Division - Construction Permits Forms and Air Pollutant Emission Notices (APENs) Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site:...

  15. Hawaii Well Construction & Pump Installation Standards Webpage...

    Open Energy Info (EERE)

    Standards Webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Hawaii Well Construction & Pump Installation Standards Webpage Abstract This webpage...

  16. Minnesota Power - Residential New Construction Rebate Program...

    Broader source: Energy.gov (indexed) [DOE]

    Construction Residential Savings Category Solar Photovoltaics Geothermal Heat Pumps Clothes Washers RefrigeratorsFreezers Dehumidifiers Water Heaters Heat Pumps Air conditioners...

  17. Construction Safety Engineer (Term Position) | Princeton Plasma...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Construction Safety Engineer (Term Position) Department: ESH&S Supervisor(s): Bill Slavin Requisition Number: 1500802 Position Summary: Associated with the IOI (Infrastructure &...

  18. Wanzek Construction Inc | Open Energy Information

    Open Energy Info (EERE)

    Inc Jump to: navigation, search Name: Wanzek Construction, Inc. Place: Fargo, North Dakota Zip: 58103 Sector: Renewable Energy, Wind energy Product: Fargo (North Dakota)-based...

  19. CRAD, Nuclear Facility Construction - Mechanical Equipment -...

    Broader source: Energy.gov (indexed) [DOE]

    Nuclear Facility Construction - Mechanical Equipment Installation, (HSS CRAD 45-53, Rev. 0) This Criteria Review and Approach Document (HSS CRAD 45-53) establishes review criteria...

  20. Construction Contractor Checklist | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Construction Contractor Checklist For small businesses seeking contracting opportunities with Argonne in the constructiondemolition field, please be sure you have taken the...

  1. Carlisle Construction Materials | Open Energy Information

    Open Energy Info (EERE)

    Carlisle, Pennsylvania Zip: 17013 Product: Carlisle Construction Materials has been manufacturing single-ply membrane roofing systems for more than 40 years and has produced over...

  2. Fermilab | Illinois Accelerator Research Center | Construction...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Construction Progress 08142013 photo photo 04152013 photo 04012013 photo 03262013 photo 03192013 photo 03112013 photo 03042013 photo 02252013 photo 02182013 photo...

  3. Hawaii Well Construction & Pump Installation Standards | Open...

    Open Energy Info (EERE)

    Handbook Abstract This document provides an overview of the well construction and pump installation standards in Hawaii. Author State of Hawaii Commission on Water Resource...

  4. Labor Standards for Construction | Department of Energy

    Energy Savers [EERE]

    for Construction More Documents & Publications Chapter 23 - Environment, Energy and Water Efficiency, Renewable Energy Technologies, Occupational Safety, and Drug-free Workplace....

  5. Roseville Electric- Residential New Construction Rebate Program

    Broader source: Energy.gov [DOE]

    Roseville Electric provides financial incentives to encourage local builders to construct energy efficient homes which incorporate  photovoltaics (PV). Participating builders can choose from three...

  6. Austin Energy- Commercial New Construction Efficiency Rebates

    Broader source: Energy.gov [DOE]

    Austin Energy offers incentives for the construction and major renovation of commercial buildings within its service territory. The program rewards customers by using a tiered payment format, which...

  7. Enterprise Assessments Salt Waste Processing Facility Construction...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Salt Waste Processing Facility Construction Quality and Fire Protection Systems Follow-up Review at the Savannah River Site - January 2016 Enterprise Assessments Salt Waste ...

  8. The U.S. average retail price for on-highway diesel fuel rose...

    U.S. Energy Information Administration (EIA) Indexed Site

    prices were found in the New England region, at 4.18 a gallon, up 2.3 cents from a week ago. Prices were lowest in the Rocky Mountain States at 3.74 a gallon, up almost 6 cents....

  9. An Optimal Deployment of Wireless Charging Lane for Electric Vehicles on Highway Corridors

    SciTech Connect (OSTI)

    Huang, Yongxi

    2016-01-01

    We propose an integrated modeling framework to optimally locate wireless charging facilities along a highway corridor to provide sufficient in-motion charging. The integrated model consists of a master, Infrastructure Planning Model that determines best locations with integrated two sub-models that explicitly capture energy consumption and charging and the interactions between electric vehicle and wireless charging technologies, geometrics of highway corridors, speed, and auxiliary system. The model is implemented in an illustrative case study of a highway corridor of Interstate 5 in Oregon. We found that the cost of establishing the charging lane is sensitive and increases with the speed to achieve. Through sensitivity analyses, we gain better understanding on the extent of impacts of geometric characteristics of highways and battery capacity on the charging lane design.

  10. 1999 Commercial Building Characteristics--Year Constructed Comparison

    U.S. Energy Information Administration (EIA) Indexed Site

    Year Constructed Comparison Percentage of Floorspace and Buildings by Year Constructed, 1999 Percentage of Floorspace and Buildings by Year Constructed, 1999. If having trouble...

  11. EA-1997: Construction Landfill Expansion, Pantex Plant, Amarillo...

    Office of Environmental Management (EM)

    7: Construction Landfill Expansion, Pantex Plant, Amarillo, Texas EA-1997: Construction Landfill Expansion, Pantex Plant, Amarillo, Texas SUMMARY Construction Landfill Expansion,...

  12. Construction Safety Advisory Committee- Membership Roster

    Broader source: Energy.gov [DOE]

    CSAC members shall consist of DOE and DOE contractor employees whose normal job duties include program management or operational direction of construction safety. Members shall be nominated by their management based on their construction safety expertise and on the needs of the committee.

  13. Manhattan Project: Y-12 Construction, 1943

    Office of Scientific and Technical Information (OSTI)

    Groundbreaking for Y-12, Oak Ridge Y-12: CONSTRUCTION (Oak Ridge: Clinton, 1943) Events > The Uranium Path to the Bomb, 1942-1944 Y-12: Design, 1942-1943 Y-12: Construction, 1943 Y-12: Operation, 1943-1944 Working K-25 into the Mix, 1943-1944 The Navy and Thermal Diffusion, 1944 Groundbreaking for the Alpha plant of the Y-12 Electromagnetic Plant took place at Oak Ridge on February 18, 1943 (right). Soon blueprints could not be produced fast enough to keep up with construction as Stone &

  14. Construction progress of the RHIC electron lenses

    SciTech Connect (OSTI)

    Fischer W.; Altinbas, Z.; Anerella, M.; Beebe, E.; et al

    2012-05-20

    In polarized proton operation the RHIC performance is limited by the head-on beam-beam effect. To overcome this limitation two electron lenses are under construction. We give an overview of the construction progress. Guns, collectors and the warm electron beam transport solenoids with their power supplies have been constructed. The superconducting solenoids that guide the electron beam during the interaction with the proton beam are near completion. A test stand has been set up to verify the performance of the gun, collector and some of the instrumentation. The infrastructure is being prepared for installation, and simulations continue to optimize the performance.

  15. CPS Energy- New Residential Construction Incentives

    Broader source: Energy.gov [DOE]

    CPS Energy offers incentives for new residential construction that is at least 15% more efficient than required by the City of San Antonio Building Code (based on IECC 2009). The building code and...

  16. CPS Energy- New Residential Construction Incentives

    Broader source: Energy.gov [DOE]

    CPS Energy offers incentives for new residential construction that is at least 15% more efficient than required by the [http://dsireusa.org/incentives/incentive.cfm?Incentive_Code=TX29R&re=1...

  17. Construction Project Safety and Health Plan RM

    Broader source: Energy.gov [DOE]

    The Construction Project Safety and Health Plan (CPSHP) Review Module is a tool that assists DOE federal project review teams in evaluating the technical sufficiency of the project readiness in...

  18. Combined Construction and Operating License (COL)

    Energy Savers [EERE]

    license to General Electric-Hitachi Global Laser Enrichment LLC (GLE) to construct and operate a uranium enrichment plant using laser technology in Wilmington, N.C. The license ...

  19. Self-assembling multimeric nucleic acid constructs

    DOE Patents [OSTI]

    Cantor, C.R.; Niemeyer, C.M.; Smith, C.L.; Sano, Takeshi; Hnatowich, D.J.; Rusckowski, M.

    1996-10-01

    The invention is directed to constructs and compositions containing multimeric forms of nucleic acid. Multimeric nucleic acids comprise single-stranded nucleic acids attached via biotin to streptavidin and bound with a functional group. These constructs can be utilized in vivo to treat or identify diseased tissue or cells. Repeated administrations of multimeric nucleic acid compositions produce a rapid and specific amplification of nucleic acid constructs and their attached functional groups. For treatment purposes, functional groups may be toxins, radioisotopes, genes or enzymes. Diagnostically, labeled multimeric constructs may be used to identify specific targets in vivo or in vitro. Multimeric nucleic acids may also be used in nanotechnology and to create self-assembling polymeric aggregates such as membranes of defined porosity, microcircuits and many other products. 5 figs.

  20. New Construction Commercial Reference Buildings — Archive

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  1. Low-rise Residential New Construction Program

    Broader source: Energy.gov [DOE]

     NYSERDA’s Low-rise Residential New Construction Programs are designed to encourage more industry involvement in the building of single-family homes and low-rise residential units that are more...

  2. Self-assembling multimeric nucleic acid constructs

    DOE Patents [OSTI]

    Cantor, Charles R.; Niemeyer, Christof M.; Smith, Cassandra L.; Sano, Takeshi; Hnatowich, Donald J.; Rusckowski, Mary

    1999-10-12

    The invention is directed to constructs and compositions containing multimeric forms of nucleic acid. Multimeric nucleic acids comprise single-stranded nucleic acids attached via biotin to streptavidin and bound with a functional group. These constructs can be utilized in vivo to treat or identify diseased tissue or cells. Repeated administrations of multimeric nucleic acid compositions produce a rapid and specific amplification of nucleic acid constructs and their attached functional groups. For treatment purposes, functional groups may be toxins, radioisotopes, genes or enzymes. Diagnostically, labeled multimeric constructs may be used to identify specific targets in vivo or in vitro. Multimeric nucleic acids may also be used in nanotechnology and to create self-assembling polymeric aggregates such as membranes of defined porosity, microcircuits and many other products.

  3. Self-assembling multimeric nucleic acid constructs

    DOE Patents [OSTI]

    Cantor, Charles R.; Niemeyer, Christof M.; Smith, Cassandra L.; Sano, Takeshi; Hnatowich, Donald J.; Rusckowski, Mary

    1996-01-01

    The invention is directed to constructs and compositions containing multimeric forms of nucleic acid. Multimeric nucleic acids comprise single-stranded nucleic acids attached via biotin to streptavidin and bound with a functional group. These constructs can be utilized in vivo to treat or identify diseased tissue or cells. Repeated administrations of multimeric nucleic acid compositions produce a rapid and specific amplification of nucleic acid constructs and their attached functional groups. For treatment purposes, functional groups may be toxins, radioisotopes, genes or enzymes. Diagnostically, labeled multimeric constructs may be used to identify specific targets in vivo or in vitro. Multimeric nucleic acids may also be used in nanotechnology and to create self-assembling polymeric aggregates such as membranes of defined porosity, microcircuits and many other products.

  4. CPS Energy- New Commercial Construction Incentives

    Broader source: Energy.gov [DOE]

    CPS Energy offers incentives for new commercial construction that is at least 15% more efficient than required by the City of San Antonio Building Code (based on IECC 2009). The building code and...

  5. DNA Assembly Line for Nano-Construction

    ScienceCinema (OSTI)

    Oleg Gang

    2010-01-08

    Building on the idea of using DNA to link up nanoparticles scientists at Brookhaven National Lab have designed a molecular assembly line for high-precision nano-construction. Nanofabrication is essential for exploiting the unique properties of nanoparticl

  6. IWTU Construction Workers Set Largest Process Vessel

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Industry | Department of Energy ITP Aluminum: Energy and Environmental Profile of the U.S. Aluminum Industry ITP Aluminum: Energy and Environmental Profile of the U.S. Aluminum Industry PDF icon aluminum.pdf More Documents & Publications ITP Aluminum: Technical Working Group on Inert Anode Technologies TTWG Licensing Guide EIS-0333: Draft Environmental Impact Statement

    IWTU Construction Workers Set Largest Process Vessel Click on image to enlarge Construction of the Integrated Waste

  7. Construction Consultants, L.I., Inc.

    Energy Savers [EERE]

    Mr. Eric Baumack Senior Project Manager Construction Consultants L.I., Inc. 36 East 2 nd Street Riverhead, New York 11901 WEL-2015-05 Dear Mr. Baumack: The Office of Enterprise Assessments' Office of Enforcement has completed an investigation into an electrical shock incident involving a worker employed by a subcontractor to Construction Consultants L.I., Inc. (CCLI) at the Brookhaven National Laboratory (BNL). CCLI is a first-tier subcontractor to Brookhaven Science Associates, LLC (BSA),

  8. Building America Partnership for Improved Residential Construction |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Partnership for Improved Residential Construction Building America Partnership for Improved Residential Construction In addition to occupied test homes, research will be conducted in highly instrumented laboratories with simulated occupancy. Shown here are the two identical, side-by-side test homes that comprise FSEC's Flexible Residential Test Facility. Photo courtesy of Florida Solar Energy Center. In addition to occupied test homes, research will be conducted in

  9. Constructing earth sheltered housing with concrete

    SciTech Connect (OSTI)

    Spears, R.E.

    1981-01-01

    This manual provides a state - of - the - art review of the design and construction of an earth - sheltered house using cast - in - place concrete, precast concrete, and concrete masonry. Based on a literature survey, theoretical work, and discussions with researchers and engineers in the concrete industry, the text is designed for use by architects, engineers, and homebuilders. The features of concrete construction that are current accepted practice for the concrete products discussed are shown to be applicable with reasonable care to building a safe, dry, and comfortable earth - sheltered house. The main considerations underlying the recommendations were the use of the earth's mass and passive solar effects to minimize energy needs, the structural capacity of the separate concrete products and their construction methods, and drainage principles and waterproofing details. Shelter ranging from those with at least 2 feet of earth cover to those with an uncovered roof of usual construction are included. To be considered an earth - sheltered residential building, at least half of the exterior wall and roof area that is in direct contact with the conditioned living space must be sheltered from the environment by earth berm or earthfill. Siting considerations, the fundamentals of passive solar heating, planning considerations, and structural considerations are discussed. Detailed guidelines are provided on concrete masonry construction, joint details in walls and floors, waterproofing, formwork and form removal, concrete construction practices, concrete masonry, and surface finishes. Numerous illustrations, tables, and a list of 32 references are provided. (Author abstract modified).

  10. Construction plans jump; operations skid in 1996

    SciTech Connect (OSTI)

    True, W.R.

    1997-08-04

    Federally regulated oil and gas pipelines turned in mixed performances in 1996, a review of annual reports filed with the US Federal Energy Regulatory Commission (FERC) shows. Plans for new pipeline construction, filed with both the FERC and Canadian regulatory bodies, increased during a 12-month period ending June 30, 1997. Natural-gas pipeline operating companies increased their operating revenues but saw their incomes fall; oil pipelines saw both revenues and incomes fall sharply as deliveries were flat. Major natural-gas pipelines slightly increased the amounts of gas they moved for a fee and decreased gas sold out of their systems. In 1996, liquids pipelines moved fewer barrels than a year earlier and reduced in all categories the miles of line operated. Each year in this exclusive report, Oil and Gas Journal tracks revenues and incomes earned from operations along with volumes moved, as submitted to the FERC by US regulated interstate pipeline companies. Data are presented on the following: pipeline revenues, incomes--1996; North American pipeline-construction costs; US pipeline costs--estimated vs. actual; North American compressor construction costs; US compressor costs--estimated vs. actual; Canadian pipeline-construction costs, actual; US interstate mileage; investment in liquids pipelines; 10 years of land-construction costs; top 10 interstate liquids lines; top 10 interstate gas lines; liquids pipeline companies; and gas pipeline companies.

  11. Sustainability in Federal Building New Construction or Modernization |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Sustainable Buildings & Campuses » Sustainability in Federal Building New Construction or Modernization Sustainability in Federal Building New Construction or Modernization Sustainability in Federal Building New Construction or Modernization The Guiding Principles require agencies to design, construct, and operate sustainable buildings. New construction or modernization offers agencies opportunities to incorporate energy-efficient designs, sustainable siting and

  12. TANK OPERATIONS CONTRACT CONSTRUCTION MANAGEMENT METHODOLOGY UTILIZING THE AGENCY METHOD OF CONSTRUCTION MANAGEMENT

    SciTech Connect (OSTI)

    LESKO KF; BERRIOCHOA MV

    2010-02-26

    Washington River Protection Solutions, LLC (WRPS) has faced significant project management challenges in managing Davis-Bacon construction work that meets contractually required small business goals. The unique challenge is to provide contracting opportunities to multiple small business constructioin subcontractors while performing high hazard work in a safe and productive manner. Previous to the WRPS contract, construction work at the Hanford Tank Farms was contracted to large companies, while current Department of Energy (DOE) Contracts typically emphasize small business awards. As an integral part of Nuclear Project Management at Hanford Tank Farms, construction involves removal of old equipment and structures and installation of new infrastructure to support waste retrieval and waste feed delivery to the Waste Treatment Plant. Utilizing the optimum construction approach ensures that the contractors responsible for this work are successful in meeting safety, quality, cost and schedule objectives while working in a very hazardous environment. This paper descirbes the successful transition from a traditional project delivery method that utilized a large business general contractor and subcontractors to a new project construction management model that is more oriented to small businesses. Construction has selected the Agency Construction Management Method (John E Schaufelberger, Len Holm, "Management of Construction Projects, A Constructor's Perspective", University of Washington, Prentice Hall 2002). This method was implemented in the first quarter of Fiscal Year 2009 (FY2009), where Construction Management is performed by substantially home office resources from the URS Northwest Office in Richland, Washington. The Agency Method has allowed WRPS to provide proven Construction Managers and Field Leads to mentor and direct small business contractors, thus providing expertise and assurance of a successful project. Construction execution contracts are subcontracted directly by WRPS to small or disadvantaged contractors that are mentored and supported by URS personnel. Each small contractor is mentored and supported utilizing the principles of the Construction Industry Institute (CII) Partnering process. Some of the key mentoring and partnering areas that are explored in this paper are, internal and external safety professional support, subcontractor safety teams and the interface with project and site safety teams, quality assurance program support to facilitate compliance with NQA-1, construction, team roles and responsibilities, work definition for successful fixed price contracts, scheduling and interface with project schedules and cost projection/accruals. The practical application of the CII Partnering principles, with the Construction Management expertise of URS, has led to a highly successful construction model that also meets small business contracting goals.

  13. Department of Energy Construction Safety Reference Guide

    SciTech Connect (OSTI)

    Not Available

    1993-09-01

    DOE has adopted the Occupational Safety and Health Administration (OSHA) regulations Title 29 Code of Federal Regulations (CFR) 1926 ``Safety and Health Regulations for Construction,`` and related parts of 29 CFR 1910, ``Occupational Safety and Health Standards.`` This nonmandatory reference guide is based on these OSHA regulations and, where appropriate, incorporates additional standards, codes, directives, and work practices that are recognized and accepted by DOE and the construction industry. It covers excavation, scaffolding, electricity, fire, signs/barricades, cranes/hoists/conveyors, hand and power tools, concrete/masonry, stairways/ladders, welding/cutting, motor vehicles/mechanical equipment, demolition, materials, blasting, steel erection, etc.

  14. Property:Building/YearConstruction2 | Open Energy Information

    Open Energy Info (EERE)

    to: navigation, search This is a property of type Date. Year of construction 2 (Year of construction) Pages using the property "BuildingYearConstruction2" Showing 25 pages using...

  15. 31 Tannery Road- Ferreira Construction Headquarters

    High Performance Buildings Database

    Branchburg, NJ The 31 Tannery project, located in Branchburg, New Jersey, is the corporate headquarters for Ferreira Construction and Ferreira Group. The facility is 42,000 square feet and serves as office space, shop, and living lab. This state-of-the-art facility raises the bar for a commercial high-performance building, with an eye towards energy independence.

  16. Construction Begins on New Waste Processing Facility | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Workers construct a new facility that will help Los Alamos National Laboratory accelerate ... Workers construct a new facility that will help Los Alamos National Laboratory accelerate ...

  17. SFCC receives $1 million grant for Youth Construction Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SFCC Receives Grant for Youth Construction Program Community Connections: Your link to ... All Issues submit SFCC receives 1 million grant for Youth Construction Program Los ...

  18. SF-424 C, Budget Information for Construction Programs | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    C, Budget Information for Construction Programs SF-424 C, Budget Information for Construction Programs This form is to be used for the following types of applications: (1) "New" ...

  19. Building America Webinar: New Construction Hybrid-Ductless Heat...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Webinar: New Construction Hybrid-Ductless Heat Pumps Study: Resistance is Futile Building America Webinar: New Construction Hybrid-Ductless Heat Pumps Study:...

  20. Hebei Construction Investment New Energy Corporation HECIC New...

    Open Energy Info (EERE)

    Construction Investment New Energy Corporation HECIC New Energy Jump to: navigation, search Name: Hebei Construction Investment New Energy Corporation (HECIC New Energy) Place:...

  1. Accident Investigation of the June 17, 2012, Construction Accident...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2012, Construction Accident - Structural Steel Collapse at The Over pack Storage ... Accident Investigation of the June 17, 2012, Construction Accident - Structural Steel ...

  2. Declaration of Construction Completion and Verification of Readiness...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Declaration of Construction Completion and Verification of Readiness to Test Declaration of Construction Completion and Verification of Readiness to Test Salt Waste Processing ...

  3. Construction Workers Achieve Safety Milestone at Savannah River...

    Office of Environmental Management (EM)

    Construction Workers Achieve Safety Milestone at Savannah River Site Construction Workers Achieve Safety Milestone at Savannah River Site April 29, 2014 - 4:23pm Addthis Savannah ...

  4. File:06FDAEPAConstructionGeneralPermitConstructionStormwater...

    Open Energy Info (EERE)

    06FDAEPAConstructionGeneralPermitConstructionStormwater.pdf Jump to: navigation, search File File history File usage Metadata File:06FDAEPAConstructionGeneralPermitConstructionStor...

  5. Sample Contract Language for Construction Using Energy-Efficient...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sample Contract Language for Construction Using Energy-Efficient Products Sample Contract Language for Construction Using Energy-Efficient Products Document covers sample language ...

  6. Seeking Information on Design and Construction of High-Performance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Seeking Information on Design and Construction of High-Performance Tenant Spaces Seeking Information on Design and Construction of High-Performance Tenant Spaces August 3, 2015 - ...

  7. DOE - Office of Legacy Management -- Chemical Construction Co...

    Office of Legacy Management (LM)

    Chemical Construction Co Linden Pilot Plant - NJ 12 FUSRAP Considered Sites Site: Chemical Construction Co., Linden Pilot Plant (NJ.12 ) Eliminated from consideration under FUSRAP ...

  8. IOI Construction Field Manager | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a wealth of first hand field experience managing construction analyses, site logistics, construction safety, trade management, scheduling and commissioning the quality...

  9. Qinghai Yulong Hydropower Construction Co Ltd | Open Energy Informatio...

    Open Energy Info (EERE)

    Yulong Hydropower Construction Co Ltd Jump to: navigation, search Name: Qinghai Yulong Hydropower Construction Co., Ltd. Place: Xining, Qinghai Province, China Zip: 810001 Sector:...

  10. Langao Lanjiang Hydropower Construction and Development Co Ltd...

    Open Energy Info (EERE)

    Lanjiang Hydropower Construction and Development Co Ltd Jump to: navigation, search Name: Langao Lanjiang Hydropower Construction and Development Co., Ltd. Place: Xi'an, Shaanxi...

  11. Training on PV Systems: Design, Construction, Operation and Maintenanc...

    Open Energy Info (EERE)

    on PV Systems: Design, Construction, Operation and Maintenance Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Training on PV Systems: Design, Construction, Operation...

  12. Colorado Construction Air Permit Application | Open Energy Information

    Open Energy Info (EERE)

    for a construction permit for construction of a commercial or industrial source of air pollution. Form Type ApplicationNotice Form Topic Air Pollution Control Division -...

  13. File:Texas Construction General Permit (TXR150000).pdf | Open...

    Open Energy Info (EERE)

    Texas Construction General Permit (TXR150000).pdf Jump to: navigation, search File File history File usage Metadata File:Texas Construction General Permit (TXR150000).pdf Size of...

  14. UPDES Storm Water Permits: General Construction Website | Open...

    Open Energy Info (EERE)

    Storm Water Permits: General Construction Website Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: UPDES Storm Water Permits: General Construction...

  15. Housing and Construction Holding Company | Open Energy Information

    Open Energy Info (EERE)

    Housing and Construction Holding Company Jump to: navigation, search Name: Housing and Construction Holding Company Place: Ramat-Gan, Israel Zip: 52215 Product: Israel-based...

  16. Zhangye Heihe Hyaulic and Hydropower Construction Co Ltd | Open...

    Open Energy Info (EERE)

    Heihe Hyaulic and Hydropower Construction Co Ltd Jump to: navigation, search Name: Zhangye Heihe Hyaulic and Hydropower Construction Co., Ltd Place: Gansu Province, China Zip:...

  17. Oregon Construction/Installation Permit for Onsite Wastewater...

    Open Energy Info (EERE)

    ConstructionInstallation Permit for Onsite Wastewater Treatment System Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Oregon Construction...

  18. Construction on Pantex High Explosives Pressing Facility Reaches...

    National Nuclear Security Administration (NNSA)

    Field Offices Welcome to the NNSA Production Office NPO News Releases Construction on Pantex High Explosives Pressing Facility ... Construction on Pantex High Explosives...

  19. Texas Construction General Permit (TXR1500000) | Open Energy...

    Open Energy Info (EERE)

    Construction General Permit (TXR1500000) Jump to: navigation, search OpenEI Reference LibraryAdd to library Reference: Texas Construction General Permit (TXR1500000) Published...

  20. Harisons Hydel Construction Co Pvt Ltd | Open Energy Information

    Open Energy Info (EERE)

    Harisons Hydel Construction Co Pvt Ltd Jump to: navigation, search Name: Harisons Hydel Construction Co. Pvt. Ltd. Place: Kullu, Himachal Pradesh, India Zip: 175101 Sector: Hydro...

  1. POSCO Engineering Construction Co Ltd POSCO E C | Open Energy...

    Open Energy Info (EERE)

    Engineering Construction Co Ltd POSCO E C Jump to: navigation, search Name: POSCO Engineering & Construction Co Ltd (POSCO E&C) Place: Gyeongsangbuk-Do, Korea (Republic) Zip:...

  2. Washington Construction Storm Water General Permit | Open Energy...

    Open Energy Info (EERE)

    Construction Storm Water General Permit Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: Washington Construction Storm Water General...

  3. Longnan Dongcheng Construction Group Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Dongcheng Construction Group Co Ltd Jump to: navigation, search Name: Longnan Dongcheng Construction Group Co., Ltd Place: Longnan, Gansu Province, China Zip: 742500 Sector: Hydro...

  4. Texas Small Construction Site Notice | Open Energy Information

    Open Energy Info (EERE)

    Small Construction Site Notice Jump to: navigation, search OpenEI Reference LibraryAdd to library Reference: Texas Small Construction Site Notice Published Texas Commission on...

  5. Longnan Jingcheng Engineering Construction Co Ltd | Open Energy...

    Open Energy Info (EERE)

    Jingcheng Engineering Construction Co Ltd Jump to: navigation, search Name: Longnan Jingcheng Engineering & Construction Co., Ltd Place: Longnan, Gansu Province, China Zip: 746010...

  6. Qinghai Shengyuan Construction Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Shengyuan Construction Co Ltd Jump to: navigation, search Name: Qinghai Shengyuan Construction Co., Ltd Place: Xining, Qinghai Province, China Zip: 810007 Sector: Hydro Product:...

  7. Chongqing Shipping Construction Development Co Ltd | Open Energy...

    Open Energy Info (EERE)

    Shipping Construction Development Co Ltd Jump to: navigation, search Name: Chongqing Shipping Construction Development Co., Ltd. Place: Chongqing, Chongqing Municipality, China...

  8. Managing Design and Construction Using Systems Engineering for...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1, Managing Design and Construction Using Systems Engineering for Use with DOE O 413.3A by Roland Frenck Functional areas: Construction and Engineering, Program Management This...

  9. MSA Apparatus Construction for Chemical Equipment Ltd | Open...

    Open Energy Info (EERE)

    MSA Apparatus Construction for Chemical Equipment Ltd Jump to: navigation, search Name: MSA Apparatus Construction for Chemical Equipment Ltd Place: United Kingdom Sector: Hydro,...

  10. AZPDES Construction General Permit Fact Sheet | Open Energy Informatio...

    Open Energy Info (EERE)

    AZPDES Construction General Permit Fact Sheet Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - Instructions: AZPDES Construction...

  11. Construction Review | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Construction Review Basic Energy Sciences (BES) BES Home About Research Facilities Science ... Construction Review EPSCoR DOE Office of Science Graduate Fellowship (DOE ...

  12. EA-1943: Construction and Operation of the Long Baseline Neutrino...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    43: Construction and Operation of the Long Baseline Neutrino Facility and Deep Underground ... EA-1943: Construction and Operation of the Long Baseline Neutrino Facility and Deep ...

  13. Anaheim Public Utilities- Commercial & Industrial New Construction Rebate Program

    Broader source: Energy.gov [DOE]

    Anaheim Public Utilities (APU) offers commercial, industrial, and institutional customers the New Construction Incentives Program to offset construction and installation costs of energy efficient...

  14. Pepco Update on Current Construction Work and Mirant Generation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Pepco Update on Current Construction Work and Mirant Generation Needs for Pepco's Planned June Line Outage Pepco Update on Current Construction Work and Mirant Generation Needs for...

  15. Hythane project by Hydrogen China Ltd and China Railway Construction...

    Open Energy Info (EERE)

    project by Hydrogen China Ltd and China Railway Construction Corporation Jump to: navigation, search Name: Hythane project by Hydrogen China Ltd and China Railway Construction...

  16. Method of remotely constructing a room

    DOE Patents [OSTI]

    Michie, J.D.; De Hart, R.C.

    1971-10-05

    The testing of nuclear devices of high explosive yield has required that cavities of relatively large size be provided at considerable distances below the surface of the earth for the pre-detonation emplacement of the device. The construction of an essentially watertight chamber or room in the cavity is generally required for the actual emplacement of the device. A method is described of constructing such a room deep within the earth by personnel at the surface. A dual wall bladder of a watertight, pliable fabric material is lowered down a shaft into a selected position. The bladder is filled with a concrete grout while a heavy fluid having essentially the same density as the grout is maintained on both sides of the bladder, to facilitate complete deployment of the bladder by the grout to form a room of desired configuration. (10 claims)

  17. Method of Remotely Constructing a Room

    DOE Patents [OSTI]

    Michie, J. D.; De Hart, R. C.

    1971-10-05

    The testing of nuclear devices of high explosive yield has required that cavities of relatively large size be provided at considerable distances below the surface of the earth for the pre-detonation emplacement of the device. The construction of an essentially watertight chamber or room in the cavity is generally required for the actual emplacement of the device. A method is described of constructing such a room deep within the earth by personnel at the surface. A dual wall bladder of a watertight, pliable fabric material is lowered down a shaft into a selected position. The bladder is filled with a concrete grout while a heavy fluid having essentially the same density as the grout is maintained on both sides of the bladder, to facilitate complete deployment of the bladder by the grout to form a room of desired configuration. (10 claims)

  18. Integrated Engineering, Construction, and Management Solutions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Integrated Engineering, Construction, and Management Solutions Washington Group International Contact: Susan Scott Public Affairs (505) 234-7204 http://www.wipp.ws Washington TRU Solutions LLC Washington TRU Solutions LLC Waste Isolation Pilot Plant Waste Isolation Pilot Plant P.O. Box 2078 P.O. Box 2078 Carlsbad, New Mexico 88221 Carlsbad, New Mexico 88221 For immediate release For immediate release Firm Awarded WIPP Records Demonstration Contract CARLSBAD, N.M., February 17, 2005 - Washington

  19. Composite construction for nuclear fuel containers

    DOE Patents [OSTI]

    Cheng, B. C.; Rosenbaum, H. S.; Armijo, J. S.

    1987-04-21

    Disclosed is an improved method for producing nuclear fuel containers of a composite construction having components providing therein a barrier system for resisting destructive action by volatile fission products or impurities and also interdiffusion of metal constituents, and the product thereof. The composite nuclear fuel containers of the method comprise a casing of zirconium or alloy thereof with a layer of copper overlying an oxidized surface portion of the zirconium or alloy thereof. 1 fig.

  20. Composite construction for nuclear fuel containers

    DOE Patents [OSTI]

    Cheng, Bo-Ching; Rosenbaum, Herman S.; Armijo, Joseph S.

    1987-01-01

    An improved method for producing nuclear fuel containers of a composite construction having components providing therein a barrier system for resisting destructive action by volatile fission products or impurities and also interdiffusion of metal constituents, and the product thereof. The composite nuclear fuel containers of the method comprise a casing of zirconium or alloy thereof with a layer of copper overlying an oxidized surface portion of the zirconium or alloy thereof.

  1. Construction of the BNL EBIS preinjector

    SciTech Connect (OSTI)

    Alessi,J.; Barton, D.; Beebe, E.; Bellavia, S.; Gould, O.; Kponou, A.; Lambiase, R.; Lessard, E.; Lockey, R.; LoDestro, V.; Mapes, M.; McCafferty, D.; McNerney, A.; Okamura, M.; Pendzick, A.; Phillips, D.; Pikin, A. I.; Raparia, D.; Ritter, J.; Scaduto, J.; Snydstrup, L.; Wilinski, M.; Zaltsman, A. et al.

    2009-05-04

    A new heavy ion preinjector, consisting of an Electron Beam Ion Source (EBIS), an RFQ, and IH linac, is under construction at Brookhaven National Laboratory. This preinjector win provide ions of any species at an energy of 2 MeV/u, resulting in increased capabilities for the Relativistic Heavy Ion Collider, and the NASA Space Radiation Laboratory programs. The RF'Q has been commissioned with beam, and most of the remaining elements are either installed or being assembled.

  2. Constructing Hydraulic Barriers in Deep Geologic Formations

    SciTech Connect (OSTI)

    Carter, E.E.; Carter, P.E. [Technologies Co, Texas (United States); Cooper, D.C. [Ph.D. Idaho National Laboratory, Idaho Falls, ID (United States)

    2008-07-01

    Many construction methods have been developed to create hydraulic barriers to depths of 30 to 50 meters, but few have been proposed for depths on the order of 500 meters. For these deep hydraulic barriers, most methods are potentially feasible for soil but not for hard rock. In the course of researching methods of isolating large subterranean blocks of oil shale, the authors have developed a wax thermal permeation method for constructing hydraulic barriers in rock to depths of over 500 meters in competent or even fractured rock as well as soil. The technology is similar to freeze wall methods, but produces a permanent barrier; and is potentially applicable in both dry and water saturated formations. Like freeze wall barriers, the wax thermal permeation method utilizes a large number of vertical or horizontal boreholes around the perimeter to be contained. However, instead of cooling the boreholes, they are heated. After heating these boreholes, a specially formulated molten wax based grout is pumped into the boreholes where it seals fractures and also permeates radially outward to form a series of columns of wax-impregnated rock. Rows of overlapping columns can then form a durable hydraulic barrier. These barriers can also be angled above a geologic repository to help prevent influx of water due to atypical rainfall events. Applications of the technique to constructing containment structures around existing shallow waste burial sites and water shutoff for mining are also described. (authors)

  3. Assurances - Non-Construction Programs | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Assurances - Non-Construction Programs Assurances - Non-Construction Programs SF 424B, Assurances - Non-Construction Programs PDF icon Assurances - Non-Construction Programs More Documents & Publications Certifications and Assurances for Use with SF-424 National Policy Assurances to be Incorporated as Award Terms Microsoft Word - National Policy AssurancesAwardTermsREVJuly2005.doc

  4. Contacts for Integrating Renewable Energy into Federal Construction Projects

    Broader source: Energy.gov [DOE]

    Contacts to learn more about integrating renewable energy technologies into Federal construction projects.

  5. Y-12 Construction maintains 'superb' safety performance | Y-12 National

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Security Complex Construction maintains ... Y-12 Construction maintains 'superb' safety performance Posted: March 6, 2013 - 6:03pm Tom Morris, B&W Y-12 vice president of projects, presents Construction's safety awards to Monica Lewis, Y-12 craft safety lead representative, and Kevin Adkisson, Knoxville Building and Construction Trades Council president. At a recent celebration, B&W Y-12's Direct-Hire Construction team was honored for two major safety achievements: more than one

  6. Constructing Hardware in a Scale Embedded Language

    Energy Science and Technology Software Center (OSTI)

    2014-08-21

    Chisel is a new open-source hardware construction language developed at UC Berkeley that supports advanced hardware design using highly parameterized generators and layered domain-specific hardware languages. Chisel is embedded in the Scala programming language, which raises the level of hardware design abstraction by providing concepts including object orientation, functional programming, parameterized types, and type inference. From the same source, Chisel can generate a high-speed C++-based cycle-accurate software simulator, or low-level Verilog designed to pass onmore » to standard ASIC or FPGA tools for synthesis and place and route.« less

  7. Construction of Discrete Time Shadow Price

    SciTech Connect (OSTI)

    Rogala, Tomasz Stettner, Lukasz

    2015-12-15

    In the paper expected utility from consumption over finite time horizon for discrete time markets with bid and ask prices and strictly concave utility function is considered. The notion of weak shadow price, i.e. an illiquid price, depending on the portfolio, under which the model without bid and ask price is equivalent to the model with bid and ask price is introduced. Existence and the form of weak shadow price is shown. Using weak shadow price usual (called in the paper strong) shadow price is then constructed.

  8. Eighteenth annual T and D construction survey

    SciTech Connect (OSTI)

    Not Available

    1983-08-01

    This survey measures utilities' actual midyear expenditures against projections. The results are cause for mild optimism, although some locales still have problems. Companies represented comprise 77.1% of installed capacity in 48 states and 75.9% of customers: 137 investor-owned utilities, 47 municipals and public power districts, 35 corporations, and 9 state or federal utilities. New and comparative data cover (1) MVA of distribution transformers (46 kW and below), (2) distribution circuit breakers, (3) capacitors (MVAr), (4) distribution substation banks, (5) transmission substation banks, (6) miles of transmission, (7) approximate circuit capability (GW), (8) tranmission circuit breakers, and (9) major construction by regions. 8 figures, 9 tables.

  9. The Federal manufactured home construction and safety standards -- implications for foam panel construction

    SciTech Connect (OSTI)

    Lee, A.D.; Schrock, D.W.; Flintoft, S.A.

    1997-03-01

    This report reviews the U.S. Department of Housing and Urban Development construction code for (HUD-code) manufactured homes, Part 3280: Manufactured Home Construction and Safety Standards (the HUD Code), to identify sections that might be relevant in determining if insulated foam core panels (or structural insulated panels, SIPs) meet the requirements of Part 3280 for use in manufactured home construction. The U.S. Department of Energy and other parties are interested in the use of SIPs in residential construction, including HUD-Code manufactured homes, because the foam panels can have a higher effective insulation value than standard stud-framed construction and use less dimensional lumber. Although SIPs have not been used in manufactured housing, they may be well suited to the factory production process used to manufacture HUD-Code homes and the fact that they require less virgin timber may reduce the effect of volatile and increasing timber prices. Part 3280 requirements for fire resistance, wind resistance, structural load strength, ventilation, transportation shock, and thermal protection are reviewed. A brief comparison is made between the HUD Code requirements and data collected from foam panel manufacturers. 8 refs.

  10. Technical WOrk Plan for: Construction Effects Monitoring

    SciTech Connect (OSTI)

    S. Goodin

    2006-09-14

    This document is the technical work plan (TWP) for performing the Construction Effects Monitoring (CEM) activity, which is one of 20 testing and monitoring activities included in Performance Confirmation Plan (BSC 2004 [DIRS 172452]). Collectively, the 20 activities make up the Performance Confirmation Program described in the plan. Each of the other 19 activities will have a separate TWP. This plan, though titled Construction Effects Monitoring, in accordance with the Performance Confirmation Plan, also includes testing that may be performed in addition to monitoring, if required. Performance confirmation is required by regulation 10 CFR Part 63 [DIRS 173273], and was started during site characterization (consistent with the regulation) and will continue until permanent closure of the repository (10 CFR 63.13 1 (b) [DIRS 173273]). This CEM activity has two primary goals: (1) to collect, analyze, and report on repository rock properties data for the purpose of confirming geotechnical and design parameters used in repository design, and (2) to provide information intended to confirm that the ability to retrieve waste from the repository has been preserved. It will be necessary for information from this CEM activity to be evaluated in combination with that obtained from other Performance Confirmation Program activities to achieve these goals. These relationships with other Performance Confirmation Program activities (e.g., drift inspection, subsurface mapping, and seismicity monitoring) will be discussed in later sections of this TWP.

  11. Construction of energy-stable projection-based reduced order...

    Office of Scientific and Technical Information (OSTI)

    Construction of energy-stable projection-based reduced order models Prev Next Title: Construction of energy-stable projection-based reduced order models Our paper aims to ...

  12. Some of the buildings constructed at Y-12

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of the buildings constructed at Y-12 In researching the history of Y-12, I have found the following information on buildings constructed as a part of the Manhattan Project. There...

  13. File:08CADPermitToConstruct.pdf | Open Energy Information

    Open Energy Info (EERE)

    CADPermitToConstruct.pdf Jump to: navigation, search File File history File usage Metadata File:08CADPermitToConstruct.pdf Size of this preview: 463 599 pixels. Other...

  14. Sustainability in Federal Building New Construction or Modernization

    Broader source: Energy.gov [DOE]

    The Guiding Principles require agencies to design, construct, and operate sustainable buildings. New construction or modernization offers agencies opportunities to incorporate energy-efficient designs, sustainable siting and materials, and renewable energy technologies into federal facilities.

  15. CDPHE Construction Storm Water Forms | Open Energy Information

    Open Energy Info (EERE)

    Construction Storm Water Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: CDPHE Construction Storm Water FormsLegal Abstract The...

  16. Construction General Permit Fact Sheet | Open Energy Information

    Open Energy Info (EERE)

    Construction General Permit Fact Sheet Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: Construction General Permit Fact SheetLegal...

  17. Environment/Health/Safety: Sub-Contractor Construction Resource...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    EH&S Sub-Contractor Construction Resource Page 2015 Home EHS0470-GERT JHA Templates Tool Box Safety Topics Pub-3000 Ch. 10 - Construction Safety Manual Administrative Policies...

  18. McGraw Hill Construction | Open Energy Information

    Open Energy Info (EERE)

    McGraw Hill Construction Jump to: navigation, search Name: McGraw Hill Construction Place: New York, NY Website: www.mcgrawhillconstruction.com References: McGraw Hill...

  19. Construction Underway on First Geothermal Power Plant in New...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Construction Underway on First Geothermal Power Plant in New Mexico Construction Underway on First Geothermal Power Plant in New Mexico September 10, 2008 - 4:38pm Addthis Photo of ...

  20. Construction, Qualification, and Low Rate Production Start-up...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Construction, Qualification, and Low Rate Production Start-up of a DC Bus Capacitor High ... Construction, Qualification, and Low Rate Production Start-up of a DC Bus Capacitor High ...

  1. Instrumentation of dredge spoil for landfill construction

    SciTech Connect (OSTI)

    Byle, M.J.; McCullough, M.L.; Alexander, R.; Vasuki, N.C.; Langer, J.A.

    1999-07-01

    The Delaware Solid Waste Authority's Northern Solid Waste Management Center is located outside of Wilmington Delaware at Cherry Island, a former dredge disposal site. Dredge spoils, of very low permeability, range in depths up to 30 m (100 feet) which form a natural liner and the foundation for the 140 ha (350-acre) municipal solid waste landfill. The soils beneath the landfill have been extensively instrumented to measure pore pressure, settlement and deflections, using inclinometer casings, standpipe piezometers, vibrating wire piezometers, pneumatic piezometers, settlement plates, liquid settlement gages, total pressure cells and thermistors. The nature of the existing waste and anticipated settlements (up to 6 m (19 feet)) have required some unique installation details. The instrumentation data has been integral in planning the landfilling sequence to maintain perimeter slope stability and has provided key geotechnical parameters needed for operation and construction of the landfill. The performance of the instrumentation and monitoring results are discussed.

  2. Chapter 15: Commercial New Construction Protocol

    SciTech Connect (OSTI)

    Keates, S.

    2014-09-01

    This protocol is intended to describe the recommended method when evaluating the whole-building performance of new construction projects in the commercial sector. The protocol focuses on energy conservation measures (ECMs) measures (or packages of measures) where evaluators can best analyze impacts using building simulation. These ECMs typically require the use of calibrated building simulations under Option D of the International Performance Measurement and Verification Protocol. Examples of such measures include Leadership in Energy and Environmental Design building certification, novel and/or efficient heating, ventilation, and air conditioning system designs, and extensive building controls systems. In general, it is best to evaluate any ECM (or set of measures) expected to significantly interact with other systems within the building and with savings sensitive to seasonal variations in weather.

  3. Caspian pipeline combine awards construction contract

    SciTech Connect (OSTI)

    Not Available

    1992-11-02

    This paper reports that the Caspian Pipeline Consortium (CPC) has let contract to Overseas Bechtel Inc. for a 500 mile crude oil export pipeline in Russia. Bechtel will provide engineering, procurement, financing, and construction services and serve as project manager for the 42 inc. line that will extend west from Grozny, near the Caspian Sea, to Novorossiisk, on the Black Sea. Estimated cost is more than $850 million. At Grozny, the new line will tie into 800 miles of existing pipeline that runs along the north shore of the Caspian Sea from supergiant Tengiz field in Kazakhstan. Together, the two segments will form a 1,300 mile system capable of shipping crude oil from the Tengiz region and from Baku, Azerbaijan, to a new terminal and port facilities at Novorossiisk for shipment to world markets, ultimately reaching open oceans via the Mediterranean Sea.

  4. Imagine Homes New Construction Occupied Test House

    SciTech Connect (OSTI)

    Stecher, Dave; Rapport, Ari; Allison, Katherine

    2013-07-01

    This report summarizes the research findings of a long-term monitoring plan to evaluate the performance of an energy-efficient home constructed in 2010 in San Antonio, Texas. Monitoring of the energy use, energy generation, and temperature conditions for this project occurred between July 2010 and October 2011. The home achieves a source energy savings of 32% without the installed photovoltaic (PV) system and 44% savings with the PV system contribution relative to the Building America House Simulation Protocols. This report summarizes the research findings related to heating, ventilation, and air conditioning system performance, estimated and actual energy use of key subsystems, electricity generation by the PV system, and performance of the solar thermal domestic hot water system.

  5. Coal gasification construction materials: an overview

    SciTech Connect (OSTI)

    Arnold, J.M.; Laurens, R.M.; Danyluk, S.

    1981-12-01

    Materials performance test results are presented for two coal gasification processes, HYGAS SNG process, which converts any type of coal to substitute natural gas (SNG), and U-GAS fuel gas process, which converts coal to a low- or medium-heat value gas. A description of the pilot plant for each process and discussion of some experiences with materials and components used in plant construction is presented. Metals performance inside the gasifier reactors and in off-gas locations depended upon the character of the process. At moderate operating temperatures (427/sup 0/C), low-carbon steels are advisable. Very high-temperature environments may not only require use of exotic alloys, clads, and/or coatings but may also preclude extensive use of internal piping/valving in scale-up designs. Inconel 182, 600, and Monel 400 have all performed erratically in the plants; but in quench and purification sections, austenitic stainless steels performed well. 9 references. (BLM)

  6. FEDERAL ASSISTANCE BUDGET INFORMATION (CONSTRUCTION) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FEDERAL ASSISTANCE BUDGET INFORMATION (CONSTRUCTION) FEDERAL ASSISTANCE BUDGET INFORMATION (CONSTRUCTION) Form provides information on the federal assistance budget for construction projects, including calculation of the federal award needed to meet requirements, exclusions, and the proposed method for calculating the non-federal share. PDF icon FEDERAL ASSISTANCE BUDGET INFORMATION (CONSTRUCTION) More Documents & Publications DOE F 4600.4 DOE F 4600.5 DOE F 4600.3

  7. Federal ESPC Process Phase 4: Project Implementation and Construction |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 4: Project Implementation and Construction Federal ESPC Process Phase 4: Project Implementation and Construction Phase 4 of the energy savings performance contract (ESPC) process focuses on project implementation and construction. At this point, an ESPC project is much like any other construction project. In fact, the U.S. Department of Energy's (DOE) indefinite-delivery, indefinite-quantity (IDIQ) ESPC contains the Federal Acquisition Regulations clauses that normally

  8. Enforcement Letter, Construction Consultants L.I., Inc. | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Construction Consultants L.I., Inc. Enforcement Letter, Construction Consultants L.I., Inc. December 4, 2015 Worker Safety and Health Enforcement Letter issued to Construction Consultants L.I., Inc. On December 4, 2015, the U.S. Department of Energy (DOE) Office of Enterprise Assessments' Office of Enforcement issued an Enforcement Letter (WEL-2015-05) to Construction Consultants L.I., Inc., relating to an electrical shock suffered by a subcontractor while working on a meteorological

  9. Enforcement Letter, URS Energy and Construction, Inc. | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy URS Energy and Construction, Inc. Enforcement Letter, URS Energy and Construction, Inc. June 24, 2015 Worker Safety and Health Enforcement Letter issued to URS Energy and Construction, Inc. On June 24, 2015, the U.S. Department of Energy (DOE) Office of Enterprise Assessments' Office of Enforcement issued an Enforcement Letter (WEL-2015-02) to URS Energy and Construction, Inc. relating to concerns with the contractor's worker exposure monitoring and sampling for silica dust during

  10. Blue Lake Rancheria Kicks Off Solar System Construction | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Blue Lake Rancheria Kicks Off Solar System Construction Blue Lake Rancheria Kicks Off Solar System Construction May 9, 2016 - 5:54pm Addthis Blue Lake Rancheria Energy Director Jana Ganion flanked by Kernen Construction Site Supervisor Gavin Johnson (left) and Blue Lake Rancheria Facilities Director Neil Harris (right). Photo from Blue Lake Rancheria Blue Lake Rancheria Energy Director Jana Ganion flanked by Kernen Construction Site Supervisor Gavin Johnson (left) and Blue Lake

  11. Air Sealing for New Home Construction | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    » Air Sealing for New Home Construction Air Sealing for New Home Construction Air Sealing for New Home Construction Minimizing air movement in and out of a house is key to building an energy-efficient home. Controlling air leakage is also critical to moisture control. It's always best to use techniques and materials identified as best practices for your site and climate. Climate-specific construction details are available through Building America. Here are some general air sealing techniques

  12. Lab provides environmental support for county construction projects

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lab provides environmental support for county construction projects Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue:May 2016 all issues All Issues » submit Lab provides environmental support for county construction projects A face-lift for Ashley Pond November 1, 2013 Ashley Pond in Los Alamos under construction in the fall of 2013 Ashley Pond in Los Alamos under construction in the fall of 2013 Contact Community Programs Office

  13. Enterprise Assessments Review, Hanford K-West Annex Facility Construction

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Quality - January 2015 | Department of Energy Review, Hanford K-West Annex Facility Construction Quality - January 2015 Enterprise Assessments Review, Hanford K-West Annex Facility Construction Quality - January 2015 January, 2015 Review of the Hanford Site K-West Annex Facility Construction Quality The U.S. Department of Energy (DOE) independent Office of Enterprise Assessments (EA) conducted an independent assessment of construction quality at the Hanford Site K-West Annex Facility. The

  14. Chapter 8: Constructing the Building | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    8: Constructing the Building Chapter 8: Constructing the Building Chapter 8 of the LANL Sustainable Design Guide contains information for construction of the building so it will perform as intended and protect the environment. PDF icon sustainable_guide_ch8.pdf More Documents & Publications LANL Sustainable Design Guide - Appendices Chapter 6: Materials Chapter 3: Building Siting

  15. Indoor airPLUS Construction Specifications | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Specifications Indoor airPLUS Construction Specifications Indoor airPLUS Construction Specifications Version 1 (Rev. 01) EPA 402/K-13/001, February 2013 PDF icon iap_rev1.pdf More Documents & Publications Indoor airPLUS Construction Specifications Version 1 (Rev. 02)

  16. MinorConstructionThresholdGuidance.PDF | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    MinorConstructionThresholdGuidance.PDF MinorConstructionThresholdGuidance.PDF PDF icon MinorConstructionThresholdGuidance.PDF More Documents & Publications Audit Report: OAS-M-15-02 CX-008733: Categorical Exclusion Determination Microsoft PowerPoint - 04 Melendez Rimando Restructuring of EM Portfolio Briefing 3 March 2010 rev 2 rcvd 8 Mar 1100 [Compatibi

  17. Construction safety program for the National Ignition Facility

    SciTech Connect (OSTI)

    Cerruti, S.J.

    1997-06-26

    The Construction Safety Program (CSP) for NIF sets forth the responsibilities, guidelines, rules, policies and regulations for all workers involved in the construction, special equipment installation, acceptance testing, and initial activation and operation of NIF at LLNL during the construction period of NIF.

  18. TANK OPERATIONS CONTRACT CONSTRUCTION MANAGEMENT METHODOLOGY UTILIZING THE AGENCY METHOD OF CONSTRUCTION MANAGEMENT TO SAFELY AND EFFECTIVELY COMPLETE NUCLEAR CONSTRUCTION WORK

    SciTech Connect (OSTI)

    LESO KF; HAMILTON HM; FARNER M; HEATH T

    2010-01-14

    Washington River Protection Solutions, LLC (WRPS) has faced significant project management challenges in managing Davis-Bacon construction work that meets contractually required small business goals. The unique challenge is to provide contracting opportunities to multiple small business construction subcontractors while performing high hazard work in a safe and productive manner. Previous to the Washington River Protection Solutions, LLC contract, Construction work at the Hanford Tank Farms was contracted to large companies, while current Department of Energy (DOE) Contracts typically emphasize small business awards. As an integral part of Nuclear Project Management at Hanford Tank Farms, construction involves removal of old equipment and structures and installation of new infrastructure to support waste retrieval and waste feed delivery to the Waste Treatment Plant. Utilizing the optimum construction approach ensures that the contractors responsible for this work are successful in meeting safety, quality, cost and schedule objectives while working in a very hazardous environment. This paper describes the successful transition from a traditional project delivery method that utilized a large business general contractor and subcontractors to a new project construction management model that is more oriented to small businesses. Construction has selected the Agency Construction Management Method. This method was implemented in the first quarter of Fiscal Year (FY) 2009, where Construction Management is performed by substantially home office resources from the URS Northwest Office in Richland, Washington. The Agency Method has allowed WRPS to provide proven Construction Managers and Field Leads to mentor and direct small business contractors, thus providing expertise and assurance of a successful project. Construction execution contracts are subcontracted directly by WRPS to small or disadvantaged contractors that are mentored and supported by DRS personnel. Each small contractor is mentored and supported utilizing the principles of the Construction Industry Institute (CII) Partnering process. Some of the key mentoring and partnering areas that are explored in this paper are, internal and external safety professional support, subcontractor safety teams and the interface with project and site safety teams, quality assurance program support to facilitate compliance with NQA-1, construction, team roles and responsibilities, work definition for successful fixed price contracts, scheduling and interface with project schedules and cost projection/accruals. The practical application of the CII Partnering principles, with the Construction Management expertise of URS, has led to a highly successful construction model that also meets small business contracting goals.

  19. Flexible Language Constructs for Large Parallel Programs

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Rosing, Matt; Schnabel, Robert

    1994-01-01

    The goal of the research described in this article is to develop flexible language constructs for writing large data parallel numerical programs for distributed memory (multiple instruction multiple data [MIMD]) multiprocessors. Previously, several models have been developed to support synchronization and communication. Models for global synchronization include single instruction multiple data (SIMD), single program multiple data (SPMD), and sequential programs annotated with data distribution statements. The two primary models for communication include implicit communication based on shared memory and explicit communication based on messages. None of these models by themselves seem sufficient to permit the natural and efficient expression ofmore » the variety of algorithms that occur in large scientific computations. In this article, we give an overview of a new language that combines many of these programming models in a clean manner. This is done in a modular fashion such that different models can be combined to support large programs. Within a module, the selection of a model depends on the algorithm and its efficiency requirements. In this article, we give an overview of the language and discuss some of the critical implementation details.« less

  20. Method of constructing a superconducting magnet

    DOE Patents [OSTI]

    Satti, John A. (Naperville, IL)

    1981-01-01

    A superconducting magnet designed to produce magnetic flux densities of the order of 4 to 5 Webers per square meter is constructed by first forming a cable of a plurality of matrixed superconductor wires with each wire of the plurality insulated from each other one. The cable is shaped into a rectangular cross-section and is wound with tape in an open spiral to create cooling channels. Coils are wound in a calculated pattern in saddle shapes to produce desired fields, such as dipoles, quadrupoles, and the like. Wedges are inserted between adjacent cables as needed to maintain substantially radial placement of the long dimensions of cross sections of the cables. After winding, individual strands in each of the cables are brought out to terminals and are interconnected to place all of the strands in series and to maximize the propagation of a quench by alternating conduction from an inner layer to an outer layer and from top half to bottom half as often as possible. Individual layers are separated from others by spiraled aluminum spacers to facilitate cooling. The wound coil is wrapped with an epoxy tape that is cured by heat and then machined to an interference fit with an outer aluminum pipe which is then affixed securely to the assembled coil by heating it to make a shrink fit. In an alternate embodiment, one wire of the cable is made of copper or the like to be heated externally to propagate a quench.

  1. Construction of artificial pigment-protein antennae

    SciTech Connect (OSTI)

    Sibbald, J.

    1997-01-10

    Photosynthesis is a complex process which results in the conversion of solar radiation into chemical energy. This chemical energy is then used as the free energy source for all living organisms. In its basic form, photosynthesis can be described as the light-activated synthesis of carbohydrates from the simple molecules of water and carbon dioxide: 6H{sub 2}O + 6 CO{sub 2} light C{sub 6}H{sub 12}O{sub 6} + 6 O{sub 2} This basic mechanism actually requires numerous reaction steps. The two primary steps being: the capture of light by pigment molecules in light-harvesting antenna complexes and the transfer of this captured energy to the so-called photochemical reaction center. While the preferred pathway for energy absorbed by the chromophores in the antenna complexes is transfer to the reaction center, energy can be lost to competing processes such as internal conversion or radiative decay. Therefore, the energy transfer must be rapid, typically on the order of picoseconds, to successfully compete. The focus of the present work is on the construction of light-harvesting antenna complexes incorporating modular pigment-proteins.

  2. Imagine Homes New Construction Occupied Test House

    SciTech Connect (OSTI)

    Stecher, D.; Rapport, A.; Allison, K.

    2013-07-01

    This report summarizes the research findings of a long-term monitoring plan to evaluate the performance of an energy-efficient home constructed in 2010 in San Antonio, Texas. Monitoring of the energy use, energy generation, and temperature conditions for this project occurred between July 2010 and October 2011. The heating, ventilation, and air conditioning system effectively maintained acceptable temperatures and humidity levels in peak cooling and heating and non-peak operating periods. Discrepancies were found between modeled and actual energy use values, with actual space cooling energy use closest to the corresponding modeled value. Energy consumption predicted for lighting, appliances, and miscellaneous electrical loads was significantly higher than measured amounts, and energy consumption predicted for cooling was significantly lower than measured amounts. A high amount of the 1,600 kWh of PV-generated electricity produced annually was sent to the electric grid every month. The solar thermal DHW system was the main source of hot water for most of the year and performed well; during summer, electrical use by the backup system was rare.

  3. Construction Cost Growth for New Department of Energy Nuclear Facilities

    SciTech Connect (OSTI)

    Kubic, Jr., William L.

    2014-05-25

    Cost growth and construction delays are problems that plague many large construction projects including the construction of new Department of Energy (DOE) nuclear facilities. A study was conducted to evaluate cost growth of large DOE construction projects. The purpose of the study was to compile relevant data, consider the possible causes of cost growth, and recommend measures that could be used to avoid extreme cost growth in the future. Both large DOE and non-DOE construction projects were considered in this study. With the exception of Chemical and Metallurgical Research Building Replacement Project (CMRR) and the Mixed Oxide Fuel Fabrication Facility (MFFF), cost growth for DOE Nuclear facilities is comparable to the growth experienced in other mega construction projects. The largest increase in estimated cost was found to occur between early cost estimates and establishing the project baseline during detailed design. Once the project baseline was established, cost growth for DOE nuclear facilities was modest compared to non-DOE mega projects.

  4. Large-Scale Industrial Carbon Capture, Storage Plant Begins Construction |

    Energy Savers [EERE]

    Department of Energy Large-Scale Industrial Carbon Capture, Storage Plant Begins Construction Large-Scale Industrial Carbon Capture, Storage Plant Begins Construction August 24, 2011 - 1:00pm Addthis Washington, DC - Construction activities have begun at an Illinois ethanol plant that will demonstrate carbon capture and storage. The project, sponsored by the U.S. Department of Energy's Office of Fossil Energy, is the first large-scale integrated carbon capture and storage (CCS) demonstration

  5. Enforcement Notice of Intent to Investigate, URS Energy and Construction,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Inc. | Department of Energy URS Energy and Construction, Inc. Enforcement Notice of Intent to Investigate, URS Energy and Construction, Inc. December 2015 The DOE Office of Enforcement issued a Notice of Intent to Investigate potential worker safety and health noncompliances at the Separations Process Research Unit Disposition Project. On December 2, 2015, the U.S. Department of Energy (DOE) Office of Enterprise Assessments' Office of Enforcement notified URS Energy and Construction, Inc.,

  6. Federal Agencies Collaborate to Expedite Construction of Alaska Natural Gas

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Pipeline | Department of Energy Collaborate to Expedite Construction of Alaska Natural Gas Pipeline Federal Agencies Collaborate to Expedite Construction of Alaska Natural Gas Pipeline June 29, 2006 - 2:44pm Addthis Agreement Establishes Framework for Increasing Energy Security WASHINGTON, DC - The U.S. Department of Energy and 14 other federal departments and agencies have signed an agreement to expedite the permitting and construction of the Alaska Natural Gas Pipeline which, when

  7. 10 CFR 851 Construction Safety Program | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    851 Construction Safety Program 10 CFR 851 Construction Safety Program June 16, 2015 Presenter: Bob Legard and Pete Wells, HAMMER Training Center, Richland, WA Topics Covered: DOE safety statistics 851 overview Employee rights Contractor responsibilities 851 challenges PDF icon 10 CFR 851 Construction Safety Program More Documents & Publications Job Safety and Health Poster Focus Group Meeting (Topical Meeting) 10 CFR 851 Worker Safety and Health Program Frequently Asked Questions - Updated

  8. Enterprise Assessments Assessment of Construction Quality and the Fire

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Protection program at the Hanford Site Waste Treatment and Immobilization Plant - April 2016 | Department of Energy Construction Quality and the Fire Protection program at the Hanford Site Waste Treatment and Immobilization Plant - April 2016 Enterprise Assessments Assessment of Construction Quality and the Fire Protection program at the Hanford Site Waste Treatment and Immobilization Plant - April 2016 April 2016 Assessment of Construction Quality and the Fire Protection program at the

  9. Declaration of Construction Completion and Verification of Readiness to

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Test | Department of Energy Declaration of Construction Completion and Verification of Readiness to Test Declaration of Construction Completion and Verification of Readiness to Test Salt Waste Processing Facility, Project No. 05-D-405 Pam Marks, FPD, DOE-SR March 2, 2016 File Presentation Key Resources PMCDP EVMS PARS IIe FPD Resource Center PM Newsletter Forms and Templates More Documents & Publications Salt Waste Processing Facility, Construction Turnover to Testing and Commissioning

  10. Salt Waste Processing Facility (SWPF) System Turnover from Construction to

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Commissioning | Department of Energy Facility (SWPF) System Turnover from Construction to Commissioning Salt Waste Processing Facility (SWPF) System Turnover from Construction to Commissioning The SWPF Project Procedure establishes requirements and responsibilities that ensure the safe and orderly transition of jurisdictional control from Construction to Commissioning and Testing (C&T) for the system identified in Appendix A, SWPF Startup System Turnover Package List. Procedure

  11. Salt Waste Processing Facility, Construction Turnover to Testing and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Commissioning Oversight | Department of Energy Construction Turnover to Testing and Commissioning Oversight Salt Waste Processing Facility, Construction Turnover to Testing and Commissioning Oversight This procedure establishes an oversight process for the Salt Waste Processing Facility Project Office (SWPFPO) Integrated Project Team (IPT) personnel assigned to perform oversight of system turnover from Construction to Commissioning and Testing. September 2015 PDF icon Procedure Key Resources

  12. Floodplain and Wetlands Assessment for Construction of a Second Full

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Service Access Road over Lena Gulch | Department of Energy Floodplain and Wetlands Assessment for Construction of a Second Full Service Access Road over Lena Gulch Floodplain and Wetlands Assessment for Construction of a Second Full Service Access Road over Lena Gulch Floodplain and Wetlands Assessment for Construction of a Second Full Service Access Road over Lena Gulch from South Golden Road to the National Renewable Energy Laboratory's South Table Mountain Complex, Golden, Colorado. PDF

  13. Guidance on New Construction under an Energy Savings Performance Contract |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy on New Construction under an Energy Savings Performance Contract Guidance on New Construction under an Energy Savings Performance Contract Document covers the guidance of new construction under an energy savings performance contract. PDF icon espc_newconguidance.pdf More Documents & Publications Practical Guide to Savings and Payments in FEMP ESPC Task Orders DOE Guidance on the Statutory Definition of Energy/Water Conservation Measures (ECMs), and Determining

  14. Guide to Integrating Renewable Energy in Federal Construction | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Integrating Renewable Energy in Federal Construction Guide to Integrating Renewable Energy in Federal Construction Document by the Federal Energy Management Program helps federal agencies understand renewable energy options, select appropriate types of renewable energy technologies, and integrate these technologies into all phases of new construction or major renovation projects. PDF icon Download FEMP's Guide to Integrating Renewable Energy. More Documents & Publications U.S.

  15. World`s developing regions provide spark for pipeline construction

    SciTech Connect (OSTI)

    Koen, A.D.; True, W.R.

    1996-02-05

    This paper reviews the proposed construction of oil and gas pipelines which are underway or proposed to be started in 1996. It breaks down the projects by region of the world, type of product to be carried, and diameter of pipeline. It also provides mileage for each category of pipeline. Major projects in each region are more thoroughly discussed giving details on construction expenditures, construction problems, and political issues.

  16. MOX Two-Year Construction Anniversary | National Nuclear Security

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Administration Two-Year Construction Anniversary MOX Two-Year Construction Anniversary MOX Two-Year Construction Anniversary In 1999, the National Nuclear Security Administration (NNSA) signed a contract with a consortium, now called Shaw AREVA MOX Services, LLC to design, build, and operate a Mixed Oxide (MOX) Fuel Fabrication Facility. This facility will be a major component in the United States program to dispose of surplus weapon-grade plutonium. The facility will take surplus

  17. Sample Contract Language for Construction Using Energy-Efficient Products |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Sample Contract Language for Construction Using Energy-Efficient Products Sample Contract Language for Construction Using Energy-Efficient Products Document covers sample language that federal agencies can use in contracts specifying or purchasing energy-efficient products in construction projects. This includes the following products qualified by ENERGY STAR or designated by the Federal Energy Management Program: Air conditioners Ballasts Boilers Chillers Doors Electric

  18. Community Meeting to Focus on NREL Construction Plans

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Community Meeting to Focus on NREL Construction Plans For more information contact: Kerry Masson (303) 275-4083 Golden, Colo., May 6, 1996 -- The U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) will host a community meeting May 15 at 6:30 p.m. at the NREL Visitors Center, 15013 Denver West Parkway. Frank Stewart, DOE's Golden Field Officer Manager, will discuss a variety of issues including planned construction projects on NREL's 300-acre campus. Construction plans

  19. Los Alamos National Laboratory cosponsors April 13 construction forum in

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Albuquerque LANL cosponsors construction forum Los Alamos National Laboratory cosponsors April 13 construction forum in Albuquerque Companies big and small can learn about upcoming construction projects and procurement opportunities. April 7, 2009 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and

  20. Double-Shell Tank Construction: Extent of Condition

    SciTech Connect (OSTI)

    Venetz, Theodore J.; Gunter, Jason R.

    2014-05-13

    This presentation covers: quick recap of Hanford DSTs and the contribution of construction difficulties which led to the leak in tank AY-102; approach to Extent of Condition reviews; typical DST construction sequence; presentation of construction information resulting from extent of condition reviews of other DST farms with comparison to tank AY-102; and overall conclusion and impact of issues on the other DST tank farms.

  1. CONSTRUCTION CALIFORNIA LAWRENCE BERKELEY LAB POC David Chen

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Oil and Gas Pipeline and Related Structures Construction 237120 All Other Specialty Trade Contractors 238990 NEVADA NEVADA SITE OFFICE POC Anita Ross Telephone (702) 295-5690 Email ...

  2. The New Mexico Building and Construction Trades Council and Los...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    sign labor agreements September 21, 2012 Unions, LANL sign labor agreements The New Mexico Building and Construction Trades Council and Los Alamos National Security LLC, have...

  3. City of Palo Alto Utilities- New Construction Commercial Rebate Program

    Broader source: Energy.gov [DOE]

    The City of Palo Alto's "Business New Construction Rebate Program" provides financial incentives for commercial, municipal, and school buildings built to the program's energy efficiency standards. ...

  4. Obama Administration Announces Loan Guarantees to Construct New...

    Office of Environmental Management (EM)

    Loan Guarantees to Construct New Nuclear Power Reactors in Georgia Obama Administration ... innovations resulting in significant operational, safety, and cost enhancements. ...

  5. H-02 Constructed Wetland Studies: Amphibians and Plants | SREL...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    H-02 Constructed Wetland Studies: Amphibians and Plants Amphibian Studies: Stacey Lance, ... The H-02 treatment wetland array associated with the H-Area facilities Buckets at sampling ...

  6. Potential Economic Impact of Constructing and Operating Solar...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    * NRELSR-550-35037 The Potential Economic Impact of Constructing and Operating Solar Power Generation Facilities in Nevada R. K. Schwer and M. Riddel Center for Business and ...

  7. OMEGA EP Building Construction Time Lapse Movie Gallery - Laboratory...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Building Construction Time Lapse Movie Gallery - Laboratory for Laser Energetics Laboratory for Laser Energetics Logo Search Home Around the Lab Past Issues Past Quick Shots About ...

  8. Vermont Construction and Operation of Net Metering Systems Rules...

    Open Energy Info (EERE)

    rule is applicable to all net metered installations in Vermont, and applies to every person, firm, company, corporation and municipality engaged in the construction or operation...

  9. Vermont Construction and Operation of Net Metering Systems Rule...

    Open Energy Info (EERE)

    rule is applicable to all net metered installations in Vermont, and applies to every person, firm, company, corporation and municipality engaged in the construction or operation...

  10. RAPID/Geothermal/General Construction | Open Energy Information

    Open Energy Info (EERE)

    that include construction for any phase of exploration, drilling, or potential development of power generating facilities require numerous permits from federal, state,...

  11. Vectren Energy Delivery of Indiana (Electric)- Commercial New Construction Rebates

    Broader source: Energy.gov [DOE]

    Vectren Energy Delivery offers commercial customers in Indiana electric rebates for the installation of certain types of equipment in newly constructed buildings through its Energy Design Assist...

  12. Modesto Irrigation District- Commercial New Construction Rebate Program

    Broader source: Energy.gov [DOE]

    The MPower Business New Construction Rebate Program is available to commercial, industrial, or agricultural customers that presently or will receive electric service from MID. Accounts billed on FL...

  13. Indoor airPLUS Construction Specifications Version 1 (Rev. 02...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Indoor airPLUS Construction Specifications Version 1 (Rev. 02), November 2013, from the U.S. Environmental Protection Agency. PDF icon chiap.pdf More Documents & Publications ...

  14. Property:Building/YearConstruction1 | Open Energy Information

    Open Energy Info (EERE)

    1 (taxation year) Subproperties This property has the following 1 subproperty: S Sweden Building 05K0004 Pages using the property "BuildingYearConstruction1" Showing 25...

  15. Construction progresses at GE's Oil & Gas Technology Center ...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the Oil & Gas Technology Center in Oklahoma City Click to email this to a friend ... the Oil & Gas Technology Center in Oklahoma City Construction is well underway on ...

  16. EPA - Construction General Permit Fact Sheet | Open Energy Information

    Open Energy Info (EERE)

    for a general permit for storm water discharges from construction activities. Author Environmental Protection Agency Published Environmental Protection Agency, 2012 DOI Not...

  17. NDEP - Nevada Construction Stormwater FAQs | Open Energy Information

    Open Energy Info (EERE)

    dealing with construction stormwater permits in Nevada. Author Nevada Division of Environmental Protection Published Nevada Division of Environmental Protection, 2010 DOI...

  18. A Posteriori Error Analysis and Adaptive Construction of Surrogate...

    Office of Scientific and Technical Information (OSTI)

    A Posteriori Error Analysis and Adaptive Construction of Surrogate Models. Citation ... Sponsoring Org: USDOE National Nuclear Security Administration (NNSA) Country of ...

  19. Washington Notice of Construction Application under New Source...

    Open Energy Info (EERE)

    Notice of Construction Application Organization State of Washington Department of Ecology Published Publisher Not Provided, 12013 DOI Not Provided Check for DOI availability:...

  20. Hawaii Clean Energy Iniative - Construction Upon a State Highway...

    Open Energy Info (EERE)

    LibraryAdd to library PermittingRegulatory Guidance - Instructions: Hawaii Clean Energy Iniative - Construction Upon a State Highway Permit PacketPermittingRegulatory...

  1. Texas General Land Office Construction Certificate and Dune Protection...

    Open Energy Info (EERE)

    LibraryAdd to library PermittingRegulatory Guidance - Checklist: Texas General Land Office Construction Certificate and Dune Protection Permit Requirements...

  2. SF6432-CN (02-02-12) Construction

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the SCR shall determine the extent that contract Control : SF 6432-CN Title: Standard Terms and Conditions for Firm-Fixed Price Commercial Construction Contracts Owner:...

  3. Meiden Plant and Engineering Construction Co Ltd | Open Energy...

    Open Energy Info (EERE)

    search Name: Meiden Plant and Engineering Construction Co Ltd Place: Tokyo, Tokyo, Japan Zip: 141-8616 Sector: Hydro, Solar, Wind energy Product: Meiden Plant and...

  4. DTE Energy- Commercial New Construction Energy Efficiency Program

    Broader source: Energy.gov [DOE]

    New Construction/Remodeling projects require descriptions of the proposed project, all facilities that will be affected by the project, detail cost breakdown by measure, architectural drawings,...

  5. Best Practices Case Study: Nelson Construction, Hamilton Way, Farmingon, CT

    SciTech Connect (OSTI)

    2011-01-03

    Building America's research team lead Building Science Corporation helped Nelson Construction achieve HERS scores of 53 and 54 on ten homes in Farmington, Connecticut.

  6. Computer-Aided Construction of Combustion Chemistry Models

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Constructing Accurate Combustion Chemistry Models: Butanols William H. Green & Michael Harper MIT Dept. of Chem. Eng. CEFRC Annual Meeting, Sept. 2010 The people who did this work:...

  7. ODEQ - Construction Stormwater Erosion and Sediment Control Manual...

    Open Energy Info (EERE)

    Erosion and Sediment Control Manual Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: ODEQ - Construction...

  8. California Construction Storm Water Program Website | Open Energy...

    Open Energy Info (EERE)

    California's Construction Storm Water Program. Author California State Water Resources Control Board Published California State Water Resources Control Board, Date Not Provided DOI...

  9. Construction Safety Advisory Committee, Meeting Minutes- June 16, 2015

    Broader source: Energy.gov [DOE]

    Agenda description of committee business conducted by membership during 2015 Construction Safety Advisory Committee meeting. Meeting was held in Washington, DC on June 16, 2015.

  10. WAC 173-400-111 - Processing Notice of Construction Applications...

    Open Energy Info (EERE)

    and Portable SourcesLegal Abstract Construction application requirements for sources of air pollution. Published NA Year Signed or Took Effect 2011 Legal Citation WAC...

  11. Idaho Permit to Construct Application Webpage | Open Energy Informatio...

    Open Energy Info (EERE)

    Idaho Permit to Construct Application Webpage Abstract This webpage provides access to air quality permitting forms and checklists for Idaho's air quality permitting process....

  12. Construction and Minor Permit Applications | Open Energy Information

    Open Energy Info (EERE)

    to library Web Site: Construction and Minor Permit Applications Author Division of Air Quality Published Publisher Not Provided, Date Not Provided DOI Not Provided Check for...

  13. Washington Air Quality Notice of Construction Permit Regulatory...

    Open Energy Info (EERE)

    Air Quality Notice of Construction Permit Regulatory Handbook Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook:...

  14. RAPID/BulkTransmission/General Construction | Open Energy Information

    Open Energy Info (EERE)

    RAPIDBulkTransmissionGeneral Construction < RAPID | BulkTransmission Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA About Bulk...

  15. Texas Large Construction Site Notice for Secondary Operators...

    Open Energy Info (EERE)

    navigation, search OpenEI Reference LibraryAdd to library Reference: Texas Large Construction Site Notice for Secondary Operators Published Texas Commission on Environmental...

  16. Texas Large Construction Site Notice for Primary Operators |...

    Open Energy Info (EERE)

    navigation, search OpenEI Reference LibraryAdd to library Reference: Texas Large Construction Site Notice for Primary Operators Published Texas Commission on Environmental...

  17. Title 43 CFR 3272 Utilization Plan and Facility Construction...

    Open Energy Info (EERE)

    2 Utilization Plan and Facility Construction Permit Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- Federal RegulationFederal Regulation: Title...

  18. Nuclear Power 2010 Program: Combined Construction and Operating...

    Broader source: Energy.gov (indexed) [DOE]

    Power 2010 (NP 2010) Construction and Operating LicenseDesign Certification (COLDC) Demonstration program together with the financial incentives provided by the Energy Policy Act...

  19. Construction of a Li Ion Battery (LIB) Cathode Production Plant...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Process for Low Cost Domestic Production of LIB Cathode Materials Process for Low Cost Domestic Production of LIB Cathode Materials Construction of a Li Ion Battery (LIB) Cathode ...

  20. Genomic library construction (Patent) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Details In-Document Search Title: Genomic library construction Compositions and methods for amplifying nucleic acid sequences from a single cell are provided. Compositions...

  1. Requirements for Petitions to Construct Electric and Gas Facilities...

    Open Energy Info (EERE)

    requirements for petitions to construct electric generation, electric transmission, and natural gas facilities pursuant to 30 V.S.A. 248. In addition, the rule clarifies...

  2. EPA - Construction General Permit webpage | Open Energy Information

    Open Energy Info (EERE)

    Agency, 2014 DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for EPA - Construction General Permit webpage Citation Environmental Protection...

  3. Idaho Well Construction and Drilling Forms Webpage | Open Energy...

    Open Energy Info (EERE)

    Not Provided DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for Idaho Well Construction and Drilling Forms Webpage Citation Idaho Department...

  4. Salt Waste Processing Facility, Construction Turnover to Testing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Salt Waste Processing Facility, Construction Turnover to Testing and Commissioning Oversight This procedure establishes an oversight process for the Salt Waste Processing Facility ...

  5. Y-12 Construction maintains 'superb' safety performance | Y-12...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    B&W Y-12 vice president of projects, presents Construction's safety awards to Monica Lewis, Y-12 craft safety lead representative, and Kevin Adkisson, Knoxville Building and...

  6. Audit of Construction Management at the Idaho National Engineering...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AUDIT OF CONSTRUCTION MANAGEMENT AT THE IDAHO NATIONAL ENGINEERING LABORATORY The Office of Inspector General wants to make the distribution of its reports as customer friendly and ...

  7. THE DIESEL ENGINE'S CHALLENGE IN THE NEW MILLENIUM

    SciTech Connect (OSTI)

    Fairbanks, John W.

    2000-08-20

    Diesel engines are the dominant propulsion engine of choice for most of the commercial surface transportation applications in the world. Consider agricultural uses: Diesel engine power is used to prepare the soil, transport the bulk seed or seedlings, pump irrigation water, and spray fertilizers, mechanically harvest some crops and distribute the produce to market. Diesel engines power virtually all of the off-highway construction equipment. Deep water commercial freighters or containerships are almost all diesel engine powered. The passenger ships are primarily either diesel or a combination of diesel and gas turbine, referred to as CODAG or CODOG.

  8. Oak Ridge Facilities Construction | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Oak Ridge Environmental Management: 30 years in 30 minutes Oak Ridge Environmental Management: 30 years in 30 minutes Addthis

    Facilities ... Oak Ridge Facilities Construction Work in wet and mud was common during the construction of Oak Ridge facilities

  9. Compositions and method of use of constructed microbial mats

    DOE Patents [OSTI]

    Bender, Judith A.; Phillips, Peter C.

    1997-01-01

    Compositions and methods of use of constructed microbial mats, comprising cyanobacteria and purple autotrophic bacteria and an organic nutrient source, in a laminated structure, are described. The constructed microbial mat is used for bioremediation of different individual contaminants and for mixed or multiple contaminants, and for production of beneficial compositions and molecules.

  10. Construction on Pantex High Explosives Pressing Facility Reaches 85% Mark |

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration Construction on Pantex High Explosives Pressing Facility Reaches 85% Mark January 03, 2014 Work on the National Nuclear Security Administration's (NNSA) High Explosives Pressing Facility at its Pantex Plant, located near Amarillo, Texas, this month passed the 85 percent construction completion mark and is on schedule and under budget. File 2014-01-03 NPO HEPF

  11. Enhanced Geothermal Systems (EGS) Well Construction Technology Evaluation Report

    SciTech Connect (OSTI)

    Polsky, Yarom; Capuano, Louis; Finger, John; Huh, Michael; Knudsen, Steve; Chip, A.J. Mansure; Raymond, David; Swanson, Robert

    2008-12-01

    This report provides an assessment of well construction technology for EGS with two primary objectives: 1. Determining the ability of existing technologies to develop EGS wells. 2. Identifying critical well construction research lines and development technologies that are likely to enhance prospects for EGS viability and improve overall economics.

  12. Sustainability in Federal Building New Construction and Major Renovations

    Broader source: Energy.gov [DOE]

    The Guiding Principles require agencies to design, construct, and operate high-performance and sustainable buildings. New construction and major renovations to existing buildings offer agencies opportunities to incorporate energy-efficient designs, sustainable siting and materials, and renewable energy technologies into federal facilities.

  13. Argonne National Laboratory-West Former Workers, Construction Worker Screening Projects

    Broader source: Energy.gov [DOE]

    Argonne National Laboratory-West Former Construction Workers (now known as Idaho National Laboratory), Construction Worker Screening Projects

  14. Buildings Energy Data Book: 1.3 Value of Construction and Research

    Buildings Energy Data Book [EERE]

    8 Number of Construction Employees and Total Employees for Select Building Envolope Industries (Thousand Employees) Poured Concrete Foundation and Structure Contractors (NAICS 238110) -Total Employment -Construction/Extraction Occupations -Construction/Extraction % of Total Masonry Contractors (NAICS 238140) -Total Employment -Construction/Extraction Occupations -Construction/Extraction % of Total Roofing Contractors (NAICS 238160) -Total Employment -Construction/Extraction Occupations

  15. Idaho Application for Permit to Construct Modify or Maintain...

    Open Energy Info (EERE)

    Construct Modify or Maintain an Injection Well - Form 42-39-1 Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: Idaho...

  16. Title 1 Chapter 3 Construction of Statutes | Open Energy Information

    Open Energy Info (EERE)

    OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: Title 1 Chapter 3 Construction of StatutesLegal Abstract Vermont statutory chapter governing the...

  17. Construction, Qualification, and Low Rate Production Start-up...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of a DC Bus Capacitor High Volume Manufacturing Facility with Capacity to Support 100,000 Electric Drive Vehicles Construction, Qualification, and Low Rate Production Start-up of a...

  18. - 1222.2 Construction Schedule_v3

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    T-Line construction mobilization 3 mons Right-of-way surveys, clearing, erosion control ... Site finishing 4 mons 3. AC Transmission Lines 620d Right-of-way surveys, clearing, ...

  19. BioConstruct GmbH | Open Energy Information

    Open Energy Info (EERE)

    GmbH Jump to: navigation, search Name: BioConstruct GmbH Place: Melle, Lower Saxony, Germany Zip: 49328 Product: Biogas plant turnkey provider also develops and operates...

  20. MOX Three-Year Construction Anniversary | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    August 1, 2010 marks the third year of successful construction at the Mixed Oxide (MOX) Fuel Fabrication Facility at the Savannah River Site near Aiken, SC. Shaw AREVA MOX ...

  1. CD-3, Approve Start of Construction/Execution

    Broader source: Energy.gov [DOE]

    CD-3 is a continuation of the execution phase. The project is ready to complete all construction, implementation, procurement, fabrication, acceptance and turnover activities. Table 2.3 lists the requirements needed to attain CD-3.

  2. Property:Building/YearConstruction | Open Energy Information

    Open Energy Info (EERE)

    YearConstruction" Showing 25 pages using this property. (previous 25) (next 25) S Sweden Building 05K0001 + 2003 + Sweden Building 05K0002 + 1999 + Sweden Building 05K0003 +...

  3. http://www.lvrj.com/business/construction-industry-still-suffer

    National Nuclear Security Administration (NNSA)

    BY HUBBLE SMITH LAS VEGAS REVIEW-JOURNAL Posted: Mar. 13, 2010 | 12:00 a.m. California ... Contact reporter Hubble Smith at hsmith@reviewjournal.com or 702 -383-0491. Construction ...

  4. High carbon fly ash finds uses in highway construction

    SciTech Connect (OSTI)

    Wen, H.; Patton, R.

    2008-07-01

    The beneficial use of high carbon fly ash in a highway construction project is discussed. The fly ash also had a relatively high content of mercury and some other heavy metals. 1 fig., 4 photos.

  5. DOE Signing Paves the Way for Funding, Construction of Innovative...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Clean Coal Plant in Florida DOE Signing Paves the Way for Funding, Construction of Innovative Clean Coal Plant in Florida April 3, 2007 - 12:17pm Addthis Advanced Technology ...

  6. Existing Commercial Reference Buildings Constructed Before 1980 — Archive

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed before 1980, organized by building type and location. A summary of building types and...

  7. Sodium citrate-assisted anion exchange strategy for construction...

    Office of Scientific and Technical Information (OSTI)

    strategy for construction of Bisub 2Osub 2COsub 3BiOI photocatalysts Citation Details In-Document Search Title: Sodium citrate-assisted anion exchange strategy for ...

  8. NMDOT Application for Permit to Construct an Access or Median...

    Open Energy Info (EERE)

    Construct an Access or Median Opening on Public Right of Way Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: NMDOT Application for...

  9. CDPHE Construction Storm Water Forms R-Factor Waiver Application...

    Open Energy Info (EERE)

    CDPHE Construction Storm Water Forms R-Factor Waiver Application Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- Permit ApplicationPermit...

  10. Construction of Building 9201-1 (Alpha 1)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 Building 9201-1 was the first building started at Y-12. Construction began on February 18, 1943, as found recorded in Hewlett and Anderson's The New World on page 152, and in...

  11. UPDES General Permit for Discharges from Construction Activities...

    Open Energy Info (EERE)

    General Permit for Discharges from Construction Activities (Permit No. UTRC00000) Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther:...

  12. Title 33 USC 401 Construction of Bridges, Causeways, Dams or...

    Open Energy Info (EERE)

    1 Construction of Bridges, Causeways, Dams or Dikes Generally; Exemptions Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: Title...

  13. Insulation for New Home Construction | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    ultra-efficient home design. It is more cost-effective to add insulation during construction than to retrofit it after the house is finished. To properly insulate a new home,...

  14. OAR 340-073 - Department of Environmental Quality Construction...

    Open Energy Info (EERE)

    3 - Department of Environmental Quality Construction Standards Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: OAR 340-073...

  15. NMSLO Affidavit of Completion of ROW Construction | Open Energy...

    Open Energy Info (EERE)

    NMSLO Affidavit of Completion of ROW Construction Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: NMSLO Affidavit of Completion of...

  16. Colorado CRS 29-20-108, Location, Construction, or Improvement...

    Open Energy Info (EERE)

    CRS 29-20-108, Location, Construction, or Improvement of Major Electrical or Natural Gas Facilities Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal...

  17. Construction Begins on the Expansion of the EMWMF

    Broader source: Energy.gov [DOE]

    Construction of a $35 million, 465,000 cubic yard expansion of the Environmental Management Waste Management Facility (EMWMF) is now underway, using funds from the American Recovery and Reinvestment Act.

  18. Departments of the Navy, Energy and Agriculture Invest in Construction...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to Produce Drop-In Biofuel for Military Departments of the Navy, Energy and Agriculture Invest in Construction of Three Biorefineries to Produce Drop-In Biofuel for Military ...

  19. Construction, Qualification, and Low Rate Production Start-up...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Bus Capacitor High Volume Manufacturing Facility with Capacity to Support 100,000 Electric Drive Vehicles Construction, Qualification, and Low Rate Production Start-up of a DC Bus ...

  20. The Business Case for Sustainable Design and Construction

    SciTech Connect (OSTI)

    Placet, Marylynn; Dyer, Beverly

    2002-11-01

    This paper discusses the challenges associated with developing a business case for sustainable design and construction, provides a framework for evaluating the benefits, and presents some preliminary data on costs of various sustainable design features.

  1. Energy Department Announces Funding for Design and Construction of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing of Biofuels, Bioproducts and Biopower | Department of Energy Funding for Design and Construction of Manufacturing of Biofuels, Bioproducts and Biopower Energy Department Announces Funding for Design and Construction of Manufacturing of Biofuels, Bioproducts and Biopower May 6, 2016 - 9:50am Addthis NEWS MEDIA CONTACT (202) 586-4940 DOENews@hq.doe.gov $90 Million Funding Will Advance Administration Goals to Reduce Carbon Emissions and Improve American Energy Security WASHINGTON

  2. Jefferson Lab Begins Awarding Contracts For Construction of $310 Million

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Upgrade | Jefferson Lab Begins Awarding Contracts For Construction of $310 Million Upgrade Jefferson Lab Begins Awarding Contracts For Construction of $310 Million Upgrade NEWPORT NEWS, Va., Jan. 6, 2009 - The U.S. Department of Energy's (DOE) Thomas Jefferson National Accelerator Facility has awarded three contracts as part of a $310 million upgrade project that will provide an international community of physicists with a cutting-edge facility for studying the basic building blocks of the

  3. SF6432-CN (02-02-12) Construction

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fixed Price Commercial Construction Contracts Owner: Procurement Policy & Quality Dept Release Date: 02/01/12 Page 1 of 27 Printed copies of this document are uncontrolled. Retrieve latest version electronically. SANDIA CORPORATION SF 6432-CN (02/01/12) Section II STANDARD TERMS AND CONDITIONS FOR FIRM-FIXED PRICE COMMERCIAL CONSTRUCTION CONTRACTS THE FOLLOWING CLAUSES APPLY TO THIS CONTRACT AS INDICATED UNLESS SPECIFICALLY DELETED, OR EXCEPT TO THE EXTENT THEY ARE SPECIFICALLY SUPPLEMENTED

  4. Existing Commercial Reference Buildings Constructed In or After 1980 |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy In or After 1980 Existing Commercial Reference Buildings Constructed In or After 1980 The files on this page contain commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. These U.S. Department of Energy (DOE) reference buildings are complete descriptions for whole building energy analysis. You can also return to a summary of building types and climate zones and information about other building

  5. Enterprise Assessments Salt Waste Processing Facility Construction Quality

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Fire Protection Systems Follow-up Review at the Savannah River Site - January 2016 | Department of Energy Salt Waste Processing Facility Construction Quality and Fire Protection Systems Follow-up Review at the Savannah River Site - January 2016 Enterprise Assessments Salt Waste Processing Facility Construction Quality and Fire Protection Systems Follow-up Review at the Savannah River Site - January 2016 February 2016 Follow-up Review of the Salt Waste Processing Systems and Fire

  6. Accident Investigation of the June 17, 2012, Construction Accident -

    Energy Savers [EERE]

    Structural Steel Collapse at The Over pack Storage Expansion #2 at the Naval Reactors Facility at the Idaho National Laboratory, Idaho Falls, Idaho | Department of Energy 7, 2012, Construction Accident - Structural Steel Collapse at The Over pack Storage Expansion #2 at the Naval Reactors Facility at the Idaho National Laboratory, Idaho Falls, Idaho Accident Investigation of the June 17, 2012, Construction Accident - Structural Steel Collapse at The Over pack Storage Expansion #2 at the

  7. A Posteriori Error Analysis and Adaptive Construction of Surrogate Models.

    Office of Scientific and Technical Information (OSTI)

    (Conference) | SciTech Connect Posteriori Error Analysis and Adaptive Construction of Surrogate Models. Citation Details In-Document Search Title: A Posteriori Error Analysis and Adaptive Construction of Surrogate Models. Abstract not provided. Authors: Jakeman, John Davis ; Butler, Troy ; Constantine, Paul ; Dawson, Clint ; Bryant, Corey ; Prudhomme, Serge Publication Date: 2013-05-01 OSTI Identifier: 1080030 Report Number(s): SAND2013-4226C 455854 DOE Contract Number: AC04-94AL85000

  8. Jefferson Lab technology, capabilities take center stage in construction of

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    portion of DOE's Spallation Neutron Source accelerator | Jefferson Lab technology, capabilities take center stage in construction of portion of DOE's Spallation Neutron Source accelerator Medium beta cryomodule JLab staff prepare to load the medium β cryomodule onto a flatbed semi for its road test. Jefferson Lab technology, capabilities take center stage in construction of portion of DOE's Spallation Neutron Source accelerator By James Schultz January 27, 2003 Jefferson Lab is once again

  9. DOE Announces $160 Million for Biorefinery Construction and Highlights New

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Agricultural Program to Promote Biofuels | Department of Energy 60 Million for Biorefinery Construction and Highlights New Agricultural Program to Promote Biofuels DOE Announces $160 Million for Biorefinery Construction and Highlights New Agricultural Program to Promote Biofuels February 22, 2006 - 12:11pm Addthis Funding Paves the Way for Diversifying America's Energy Mix DECATUR, IL - Energy Secretary Samuel W. Bodman, today announced $160 million in cost-shared funding over three years to

  10. Insulation for New Home Construction | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for New Home Construction Insulation for New Home Construction Planning carefully for insulation results in reduced utility bills and superior comfort during the life of the home. In this house, raised heel trusses accommodate R-60 insulation. | Credit: Paul Norton, NREL. Planning carefully for insulation results in reduced utility bills and superior comfort during the life of the home. In this house, raised heel trusses accommodate R-60 insulation. | Credit: Paul Norton, NREL. State and local

  11. President Obama Announces Loan Guarantees to Construct New Nuclear Power

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reactors in Georgia | Department of Energy Loan Guarantees to Construct New Nuclear Power Reactors in Georgia President Obama Announces Loan Guarantees to Construct New Nuclear Power Reactors in Georgia February 16, 2010 - 12:00am Addthis Washington D.C. --- Underscoring his Administration's commitment to jumpstarting the nation's nuclear power industry, President Obama today announced that the Department of Energy has offered conditional commitments for a total of $8.33 billion in loan

  12. FAQS Job Task Analyses - Construction Management | Department of Energy

    Energy Savers [EERE]

    Construction Management FAQS Job Task Analyses - Construction Management FAQS Job Task Analyses are performed on the Function Area Qualification Standards. The FAQS Job Task Analyses consists of: Developing a comprehensive list of tasks that define the job such as the duties and responsibilities which include determining their levels of importance and frequency. Identifying and evaluating competencies. Last step is evaluating linkage between job tasks and competencies. PDF icon FAQS JTA -

  13. French landmark decree authorizes ITER construction | Princeton Plasma

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Physics Lab French landmark decree authorizes ITER construction By John Greenwald November 20, 2012 Tweet Widget Google Plus One Share on Facebook The French government has capped more than two years of review by issuing a license for the construction of ITER, the international fusion project that the European Union, the United States and five other countries are building in Cadarache, France, to demonstrate the feasibility of fusion energy. French Prime Minister Jean-Marc Ayrault signed the

  14. Construction on Pantex High Explosives Pressing Facility Reaches 85% Mark |

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration Construction on Pantex High Explosives Pressing Facility Reaches 85% Mark December 16, 2013 WASHINGTON, D.C. - Work on the National Nuclear Security Administration's (NNSA) High Explosives Pressing Facility at its Pantex Plant, located near Amarillo, Texas, this month passed the 85 percent construction completion mark and is on schedule and under budget. The new 45,000 square-foot state-of-the-art facility will provide safer, more reliable production

  15. Construction of Heterometallic Clusters in a small peptide scaffold as

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    [NiFe]-hydrogenase models: Development of a Synthetic Methodology Construction of Heterometallic Clusters in a small peptide scaffold as [NiFe]-hydrogenase models: Development of a Synthetic Methodology Authors: Dutta, A., Hamilton, G. A., Hartnett, H. E., Jones, A. K. Title: Construction of Heterometallic Clusters in a small peptide scaffold as [NiFe]-hydrogenase models: Development of a Synthetic Methodology Source: Inorganic Chemistry Year: 2012 Volume: 51 Pages: 9580-9588 ABSTRACT:

  16. Construction Underway on First Geothermal Power Plant in New Mexico |

    Broader source: Energy.gov (indexed) [DOE]

    outlines the energy service company (ESCO) qualifications for Constellation NewEnergy, Inc., in relation to the U.S. Department of Energy's energy savings performance contract. PDF icon Download the Constellation NewEnergy ESCO Qualification Sheet.

    An overview of the impact that the clean energy economy is having on the U.S. construction industry. Image icon Green Construction Infographic.jpg More Documents & Publications Strategies for the Commercialization & Deployment of GHG

  17. Buildings Energy Data Book: 1.3 Value of Construction and Research

    Buildings Energy Data Book [EERE]

    9 Number of Construction Employees and Total Employees for Select Building Equipment Industries (Thousand Employees) Electrical Contractors and Other Wiring Installation Contractors (NAICS 238210) -Total Employment -Construction/Extraction Occupations -Construction/Extraction % of Total Plumbing, Heating, and Air-Conditioning Contractors (NAICS 238220) -Total Employment -Construction/Extraction Occupations -Construction/Extraction % of Total Other Building Equipment Contractors (NAICS 238290)

  18. Weather, construction inflation could squeeze North American pipelines

    SciTech Connect (OSTI)

    True, W.R.

    1998-08-31

    Major North American interstate and interprovincial pipeline companies appear headed for a squeeze near-term: 1997 earnings from operations were down for the second straight year even as the companies expected new construction to begin this year or later to cost more. The effects of warmer-than-normal weather during 1997 in North America made a showing in annual reports filed by US regulated interstate oil and gas pipeline companies with the US Federal Energy Regulatory Commission (FERC). This paper contains data on the following: pipeline revenues, incomes--1997; North American pipeline costs; North American pipeline costs (estimated vs. actual); North American compressor construction costs; US compressor costs (estimated vs. actual); US interstate mileage; investment in liquids pipelines; 10 years of land construction costs; top 10 interstate liquids lines; top 10 interstate gas lines; liquids pipeline companies; and gas pipeline companies.

  19. Table B8. Year Constructed, Number of Buildings, 1999

    U.S. Energy Information Administration (EIA) Indexed Site

    B8. Year Constructed, Number of Buildings, 1999" ,"Number of Buildings (thousand)" ,"All Buildings","Year Constructed" ,,"1919 or Before","1920 to 1945","1946 to 1959","1960 to 1969","1970 to 1979","1980 to 1989","1990 to 1999" "All Buildings ................",4657,419,499,763,665,774,846,690 "Building Floorspace" "(Square Feet)" "1,001 to 5,000

  20. Building America Webinar: New Construction Hybrid-Ductless Heat Pumps

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Study: Resistance is Futile | Department of Energy New Construction Hybrid-Ductless Heat Pumps Study: Resistance is Futile Building America Webinar: New Construction Hybrid-Ductless Heat Pumps Study: Resistance is Futile This webinar on June 24, 2015, focused on the use of ductless heat pumps (DHP) as a hybrid "all-electric" heating system in new high-performance homes. In a DHP/hybrid heating system, the DHP fan coil is located in the main living area in combination with electric

  1. TEST-HOLE CONSTRUCTION FOR A NEUTRONIC REACTOR

    DOE Patents [OSTI]

    Ohlinger, L.A.; Seitz, F.; Young, G.J.

    1959-02-17

    Test-hole construction is described for a reactor which provides safe and ready access to the neutron flux region for specimen materials which are to be irradiated therein. An elongated tubular thimble adapted to be inserted in the access hole through the wall of the reactor is constructed of aluminum and is provided with a plurality of holes parallel to the axis of the thimble for conveying the test specimens into position for irradiation, and a conduit for the circulation of coolant. A laminated shield formed of alternate layers of steel and pressed wood fiber is disposed lengthwise of the thimble near the outer end thereof.

  2. Small business success story: Lindblad Construction | Argonne National

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratory Lindblad is the contractor for the laboratory's Rapid Response Program, which allows for construction activities valued at $50,000 and under to be performed on an accelerated schedule. The contract is for a three-year period for an estimated total of $3 million. Lindblad is the contractor for the laboratory's Rapid Response Program, which allows for construction activities valued at $50,000 and under to be performed on an accelerated schedule. The contract is for a three-year

  3. Mini-columns for Conducting Breakthrough Experiments. Design and Construction

    SciTech Connect (OSTI)

    Dittrich, Timothy M.; Reimus, Paul William; Ware, Stuart Douglas

    2015-06-11

    Experiments with moderately and strongly sorbing radionuclides (i.e., U, Cs, Am) have shown that sorption between experimental solutions and traditional column materials must be accounted for to accurately determine stationary phase or porous media sorption properties (i.e., sorption site density, sorption site reaction rate coefficients, and partition coefficients or Kd values). This report details the materials and construction of mini-columns for use in breakthrough columns to allow for accurate measurement and modeling of sorption parameters. Material selection, construction techniques, wet packing of columns, tubing connections, and lessons learned are addressed.

  4. Buildings","Year Constructed"

    U.S. Energy Information Administration (EIA) Indexed Site

    B9. Year Constructed, Floorspace, 1999" ,"Total Floorspace (million square feet)" ,"All Buildings","Year Constructed" ,,"1919 or Before","1920 to 1945","1946 to 1959","1960 to 1969","1970 to 1979","1980 to 1989","1990 to 1999" "All Buildings ................",67338,4034,6445,9127,10866,11840,13931,11094 "Building Floorspace" "(Square Feet)" "1,001 to 5,000

  5. Buildings*","Year Constructed"

    U.S. Energy Information Administration (EIA) Indexed Site

    B8. Year Constructed, Number of Buildings for Non-Mall Buildings, 2003" ,"Number of Buildings (thousand)" ,"All Buildings*","Year Constructed" ,,"1919 or Before","1920 to 1945","1946 to 1959","1960 to 1969","1970 to 1979","1980 to 1989","1990 to 1999","2000 to 2003" "All Buildings* ...............",4645,330,527,562,579,731,707,876,334 "Building Floorspace"

  6. Buildings*","Year Constructed"

    U.S. Energy Information Administration (EIA) Indexed Site

    B9. Year Constructed, Floorspace for Non-Mall Buildings, 2003" ,"Total Floorspace (million square feet)" ,"All Buildings*","Year Constructed" ,,"1919 or Before","1920 to 1945","1946 to 1959","1960 to 1969","1970 to 1979","1980 to 1989","1990 to 1999","2000 to 2003" "All Buildings* ...............",64783,3769,6871,7045,8101,10772,10332,12360,5533 "Building

  7. Building America Webinar: New Construction Hybrid-Ductless Heat Pumps

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Study: Resistance is Futile | Department of Energy New Construction Hybrid-Ductless Heat Pumps Study: Resistance is Futile Building America Webinar: New Construction Hybrid-Ductless Heat Pumps Study: Resistance is Futile This webinar will focus on the use of ductless heat pumps (DHP) as a hybrid "all-electric" heating system in new high-performance homes. In a DHP/hybrid heating system, the DHP fan coil is located in the main living area in combination with electric resistance zone

  8. Buildings Energy Data Book: 1.3 Value of Construction and Research

    Buildings Energy Data Book [EERE]

    1 Estimated Value of All U.S. Construction Relative to the GDP ($2010) - 2007 estimated value of all U.S. construction was $1.82 trillion (including renovation; heavy construction; public works; residential, commercial, and industrial new construction; and non-contract work). - Compared to the $14.6 trillion 2007 U.S. gross domestic product (GDP), all construction held a 12.4% share. - In 2007, residential and commercial building renovation (valued at $496 billion) and new building construction

  9. Compositions and methods of use of constructed microbial mats

    DOE Patents [OSTI]

    Bender, Judith A.; Phillips, Peter C.

    2000-01-01

    Compositions, methods and devices for bioremediation that comprise components of constructed microbial mats with organic and inorganic materials are described. The compositions, methods and devices can be used for bioremediation of different individual contaminants and for mixed or multiple contaminants, and for production of beneficial compositions and molecules.

  10. Construction safety in DOE. Part 1, Students guide

    SciTech Connect (OSTI)

    Handwerk, E C

    1993-08-01

    This report is the first part of a compilation of safety standards for construction activities on DOE facilities. This report covers the following areas: general safety and health provisions; occupational health and environmental control/haz mat; personal protective equipment; fire protection and prevention; signs, signals, and barricades; materials handling, storage, use, and disposal; hand and power tools; welding and cutting; electrical; and scaffolding.

  11. Utilization of CFB fly ash for construction applications

    SciTech Connect (OSTI)

    Conn, R.E.; Sellakumar, K.; Bland, A.E.

    1999-07-01

    Disposal in landfills has been the most common means of handling ash in circulating fluidized bed (CFB) boiler power plants. Recently, larger CFB boilers with generating capacities up to 300 MWe are currently being planned, resulting in increased volumes and disposal cost of ash by-product. Studies have shown that CFB ashes do not pose environmental concerns that should significantly limit their potential utilization. Many uses of CFB ash are being investigated by Foster Wheeler, which can provide more cost-effective ash management. Construction applications have been identified as one of the major uses for CFB ashes. Typically, CFB ash cannot be used as a cement replacement in concrete due to its unacceptably high sulfur content. However, CFB ashes can be used for other construction applications that require less stringent specifications including soil stabilization, road base, structural fill, and synthetic aggregate. In this study, potential construction applications were identified for fly ashes from several CFB boilers firing diverse fuels such as petroleum coke, refuse derived fuel (RDF) and coal. The compressive strength of hydrated fly ashes was measured in order to screen their potential for use in various construction applications. Based on the results of this work, the effects of both ash chemistry and carbon content on utilization potential were ascertained. Actual beneficial uses of ashes evaluated in this study are also discussed.

  12. Another First at NSLS-II Construction Site

    ScienceCinema (OSTI)

    None

    2010-01-08

    Workers at the NSLS-II ring building construction site recently completed the first complicated concrete pour for the approximately 19-ft.-tall walls of the Utility Tunnel. The continuous pour was the first of its kind, as previous pours have been for foo

  13. Project Construction Photos | U.S. DOE Office of Science (SC...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Project Construction Photos Project Assessment (OPA) OPA Home About Project Management SC Projects Review Dates (updated April 2016) Project Construction Photos Completed Projects ...

  14. China-NAMA Programme for the Construction Sector in Asia | Open...

    Open Energy Info (EERE)

    NAMA Programme for the Construction Sector in Asia Jump to: navigation, search Name China-NAMA Programme for the Construction Sector in Asia AgencyCompany Organization United...

  15. Radioactive Air Emission Notice of Construction (NOC) for Construction of Liquid Effluent Transfer System Project W-519

    SciTech Connect (OSTI)

    HOMAN, N.A.

    2000-05-01

    The proposed action is to install a new liquid effluent transfer system (three underground waste transfer pipelines). As such, a potential new source will be created as a result of the construction activities. The anticipated emissions associated with this activity are insignificant.

  16. Novel Class of Nanohybrids for Construction of Light Harvesting Systems -

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Innovation Portal Photovoltaic Solar Photovoltaic Advanced Materials Advanced Materials Find More Like This Return to Search Novel Class of Nanohybrids for Construction of Light Harvesting Systems University of Colorado Contact CU About This Technology Publications: PDF Document Publication CU3004B (Nanohybrid Solar Cells) Marketing Summary.pdf (202 KB) Technology Marketing Summary Semiconducting single wall carbon nanotubes (SWCNTs) have unique electronic and optical properties for

  17. Reducing Peak Demand to Defer Power Plant Construction in Oklahoma

    Energy Savers [EERE]

    Reducing Peak Demand to Defer Power Plant Construction in Oklahoma Located in the heart of "Tornado Alley," Oklahoma Gas & Electric Company's (OG&E) electric grid faces significant challenges from severe weather, hot summers, and about 2% annual load growth. To better control costs and manage electric reliability under these conditions, OG&E is pursuing demand response strategies made possible by implementation of smart grid technologies, tools, and techniques from

  18. Dictionary construction in sparse methods for image restoration

    SciTech Connect (OSTI)

    Wohlberg, Brendt

    2010-01-01

    Sparsity-based methods have achieved very good performance in a wide variety of image restoration problems, including denoising, inpainting, super-resolution, and source separation. These methods are based on the assumption that the image to be reconstructed may be represented as a superposition of a few known components, and the appropriate linear combination of components is estimated by solving an optimization such as Basis Pursuit De-Noising (BPDN). Considering that the K-SVD constructs a dictionary which has been optimised for mean performance over a training set, it is not too surprising that better performance can be achieved by selecting a custom dictionary for each individual block to be reconstructed. The nearest neighbor dictionary construction can be understood geometrically as a method for estimating the local projection into the manifold of image blocks, whereas the K-SVD dictionary makes more sense within a source-coding framework (it is presented as a generalization of the k-means algorithm for constructing a VQ codebook), is therefore, it could be argued, less appropriate in principle, for reconstruction problems. One can, of course, motivate the use of the K-SVD in reconstruction application on practical grounds, avoiding the computational expense of constructing a different dictionary for each block to be denoised. Since the performance of the nearest neighbor dictionary decreases when the dictionary becomes sufficiently large, this method is also superior to the approach of utilizing the entire training set as a dictionary (and this can also be understood within the image block manifold model). In practical terms, the tradeoff is between the computational cost of a nearest neighbor search (which can be achieved very efficiently), or of increased cost at the sparse optimization.

  19. Construction Branch Electrician & Lead Electrician | Princeton Plasma

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Physics Lab Construction Branch Electrician & Lead Electrician Department: Engineering Supervisor(s): Frank Jones Staff: TSS 04 & 05 Requisition Number: 1600208 (POOL JOB, SOURCE REQUISITION) Position Summary: The Princeton University Plasma Physics Laboratory, a world-renowned fusion energy research center under contract with the U. S. Department of Energy is seeking to hire a: *Facilities Electrician (Grade, TSS 04, one-year term position) and a *Facilities LEAD Electrician (Grade,

  20. Multifunctional recombinant phycobiliprotein-based fluorescent constructs and phycobilisome display

    DOE Patents [OSTI]

    Glazer, Alexander N.; Cai, Yuping

    2003-11-18

    The invention provides multifunctional fusion constructs which are rapidly incorporated into a macromolecular structure such as a phycobilisome such that the fusion proteins are separated from one another and unable to self-associate. The invention provides methods and compositions for displaying a functional polypeptide domain on an oligomeric phycobiliprotein, including fusion proteins comprising a functional displayed domain and a functional phycobiliprotein domain incorporated in a functional oligomeric phycobiliprotein. The fusion proteins provide novel specific labeling reagents.

  1. Multifunctional recombinant phycobiliprotein-based fluorescent constructs and phycobilisome display

    DOE Patents [OSTI]

    Glazer, Alexander N.; Cai, Yuping

    2007-02-13

    The invention provides multifunctional fusion constructs which are rapidly incorporated into a macromolecular structure such as a phycobilisome such that the fusion proteins are separated from one another and unable to self-associate. The invention provides methods and compositions for displaying a functional polypeptide domain on an oligomeric phycobiliprotein. including fusion proteins comprising a functional displayed domain and a functional phycobiliprotein domain incorporated in a functional oligomeric phycobiliprotein. The fusion proteins provide novel specific labeling reagents.

  2. Multifunctional recombinant phycobiliprotein-based fluorescent constructs and phycobilisome display

    DOE Patents [OSTI]

    Glazer, Alexander N.; Cai, Yuping

    2007-01-30

    The invention provides multifunctional fusion constructs which are rapidly incorporated into a macromolecular structure such as a phycobilisome such that the fusion proteins are separated from one another and unable to self-associate. The invention provides methods and compositions for displaying a functional polypeptide domain on an oligomeric phycobiliprotein, including fusion proteins comprising a functional displayed domain and a functional phycobiliprotein domain incorporated in a functional oligomeric phycobiliprotein. The fusion proteins provide novel specific labeling reagents.

  3. Pseudorandom functions revisited: The cascade construction and its concrete security

    SciTech Connect (OSTI)

    Bellare, M.; Canetti, R.; Krawczyk, H.

    1996-12-31

    Pseudorandom function families are a powerful cryptographic primitive, yielding, in particular, simple solutions for the main problems in private key cryptography. Their existence based on general assumptions (namely, the existence of one-way functions) has been established. In this work we investigate new ways of designing pseudorandom function families. The goal is to find constructions that are both efficient and secure, and thus eventually to bring the benefits of pseudorandom functions to practice. The basic building blocks in our design are certain limited versions of pseudorandom function families, called finite-length input pseudorandom function families, for which very efficient realizations exist in practical cryptography. Thus rather than starting from one-way functions, we propose constructions of {open_quote}full-fledged{close_quotes} pseudorandom function families from these limited ones. In particular we propose the cascade construction, and provide a concrete security analysis which relates the strength of the cascade to that of the underlying finite pseudorandom function family in a precise and quantitative way.

  4. Field Testing of Compartmentalization Methods for Multifamily Construction

    SciTech Connect (OSTI)

    Ueno, K.; Lstiburek, J.

    2015-03-01

    The 2012 IECC has an airtightness requirement of 3 air changes per hour at 50 Pascals test pressure for both single-family and multifamily construction in Climate Zones 3-8. Other programs (LEED, ASHRAE 189, ASHRAE 62.2) have similar or tighter compartmentalization requirements, driving the need for easier and more effective methods of compartmentalization in multifamily buildings. Builders and practitioners have found that fire-resistance rated wall assemblies are a major source of difficulty in air sealing/compartmentalization, particularly in townhouse construction. This problem is exacerbated when garages are “tucked in” to the units and living space is located over the garages. In this project, Building Science Corporation examined the taping of exterior sheathing details to improve air sealing results in townhouse and multifamily construction, when coupled with a better understanding of air leakage pathways. Current approaches are cumbersome, expensive, time consuming, and ineffective; these details were proposed as a more effective and efficient method. The effectiveness of these air sealing methods was tested with blower door testing, including “nulled” or “guarded” testing (adjacent units run at equal test pressure to null out inter-unit air leakage, or “pressure neutralization”). Pressure diagnostics were used to evaluate unit-to-unit connections and series leakage pathways (i.e., air leakage from exterior, into the fire-resistance rated wall assembly, and to the interior).

  5. Energy Evaluation of a New Construction Pilot Community: Fresno, California

    SciTech Connect (OSTI)

    Burdick, A.; Poerschke, A.; Rapport, A.; Wayne, M.

    2014-06-01

    A new construction pilot community was constructed by builder-partner Wathen-Castanos Hybrid Homes (WCHH) based on a single occupied test house that was designed to achieve greater than 30% energy savings with respect to the House Simulation Protocols (Hendron, Robert; Engebrecht, Cheryn (2010). Building America House Simulation Protocols. Golden, CO: National Renewable Energy Laboratory). Builders face several key problems when implementing a whole-house systems integrated measures package (SIMP) from a single test house into multiple houses. Although a technical solution already may have been evaluated and validated in an individual test house, the potential exists for constructability failures at the community scale. This report addresses factors of implementation and scalability at the community scale and proposes methodologies by which community-scale energy evaluations can be performed based on results at the occupied test house level. Research focused on the builder and trade implementation of a SIMP and the actual utility usage in the houses at the community scale of production. Five occupants participated in this community-scale research by providing utility bills and information on occupancy and miscellaneous gas and electric appliance use for their houses. IBACOS used these utility data and background information to analyze the actual energy performance of the houses. Verification with measured data is an important component in predictive energy modeling. The actual utility bill readings were compared to projected energy consumption using BEopt with actual weather and thermostat set points for normalization.

  6. Prescriptive method for insulating concrete forms in residential construction

    SciTech Connect (OSTI)

    Vrankar, A.; Elhajj, N.

    1998-05-01

    Characterized as strong, durable, and energy-efficient, a new wall system for housing called Insulating Concrete Forms (ICFs) is emerging as an alternative to lumber wall frames. Due to rising costs and varying quality of framing lumber, home builders are increasing their use of ICFs even though added engineering costs make ICF homes slightly more expensive than homes with wood framing. To improve the affordability and acceptance of ICF homes, this report sets guidelines on the design, construction and inspection of ICF wall systems in residential construction. Based on thorough testing and research, the Prescriptive Method section of the report outlines minimum requirements for ICF systems including wall thickness, termite protection, reinforcement, lintel span, and connection requirements. It highlights construction and thermal guidelines for ICFs and explains how to apply the prescriptive requirements to one- and two-family homes. The Commentary section provides supplemental information and the engineering assumptions and methods used for the prescriptive method. Appendices contain step-by-step examples on how to apply ICF requirements when designing a home. They also contain engineering technical substantiation and metric conversion factors.

  7. Buildings Energy Data Book: 2.5 Residential Construction and Housing Market

    Buildings Energy Data Book [EERE]

    3 Value of New Building Construction, by Year ($2010 Billion) 1980 1985 1990 1995 2000 2005 2006 2007 2008 2009 2010 Source(s): DOC, Current Construction Reports: Value of New Construction Put in Place, C30, Aug. 2003, Table 1 for 1980-1990; DOC, Annual Value of Private Construction Put in Place 1993-2001, Annual Value of Private Construction Put in Place 2002-2011, Annual Value of Public Construction Put in Place 1993- 2001, Annual Value of Public Construction Put in Place 2002-2011; and EIA,

  8. Enhanced Geothermal Systems (EGS) well construction technology evaluation report.

    SciTech Connect (OSTI)

    Capuano, Louis, Jr.; Huh, Michael; Swanson, Robert; Raymond, David Wayne; Finger, John Travis; Mansure, Arthur James; Polsky, Yarom; Knudsen, Steven Dell

    2008-12-01

    Electricity production from geothermal resources is currently based on the exploitation of hydrothermal reservoirs. Hydrothermal reservoirs possess three ingredients critical to present day commercial extraction of subsurface heat: high temperature, in-situ fluid and high permeability. Relative to the total subsurface heat resource available, hydrothermal resources are geographically and quantitatively limited. A 2006 DOE sponsored study led by MIT entitled 'The Future of Geothermal Energy' estimates the thermal resource underlying the United States at depths between 3 km and 10 km to be on the order of 14 million EJ. For comparison purposes, total U.S. energy consumption in 2005 was 100 EJ. The overwhelming majority of this resource is present in geological formations which lack either in-situ fluid, permeability or both. Economical extraction of the heat in non-hydrothermal situations is termed Enhanced or Engineered Geothermal Systems (EGS). The technologies and processes required for EGS are currently in a developmental stage. Accessing the vast thermal resource between 3 km and 10 km in particular requires a significant extension of current hydrothermal practice, where wells rarely reach 3 km in depth. This report provides an assessment of well construction technology for EGS with two primary objectives: (1) Determining the ability of existing technologies to develop EGS wells. (2) Identifying critical well construction research lines and development technologies that are likely to enhance prospects for EGS viability and improve overall economics. Towards these ends, a methodology is followed in which a case study is developed to systematically and quantitatively evaluate EGS well construction technology needs. A baseline EGS well specification is first formulated. The steps, tasks and tools involved in the construction of this prospective baseline EGS well are then explicitly defined by a geothermal drilling contractor in terms of sequence, time and cost. A task and cost based analysis of the exercise is subsequently conducted to develop a deeper understanding of the key technical and economic drivers of the well construction process. Finally, future research & development recommendations are provided and ranked based on their economic and technical significance.

  9. Construction of a bioluminescent reporter strain to detect polychlorinated biphenyls

    SciTech Connect (OSTI)

    Layton, A.C.; Muccini, M.; Ghosh, M.M.; Sayler, G.S.

    1998-12-01

    A bioluminescent reporter strain, Ralstonia eutropha ENV307 (pUTK60), was constructed for the detection of polychlorinated biphenyls by inserting the biphenyl promoter upstream of the bioluminescence genes. In the presence of a nonionic surfactant, which enhances the solubility of chlorinated biphenyls, bioluminescence was induced three- to fourfold over background by biphenyl, monochlorinated biphenyls, and Aroclor 1242. The minimum detection limits for these compounds ranged from 0.15 mg/liter for 4-chlorobiphenyl to 1.5 mg/liter for Aroclor 1242.

  10. Method for construction of normalized cDNA libraries

    DOE Patents [OSTI]

    Soares, Marcelo B.; Efstratiadis, Argiris

    1996-01-01

    This invention provides a method to normalize a directional cDNA library constructed in a vector that allows propagation in single-stranded circle form comprising: (a) propagating the directional cDNA library in single-stranded circles; (b) generating fragments complementary to the 3' noncoding sequence of the single-stranded circles in the library to produce partial duplexes; (c) purifying the partial duplexes; (d) melting and reassociating the purified partial duplexes to moderate Cot; and (e) purifying the unassociated single-stranded circles, thereby generating a normalized cDNA library.

  11. Junior Solar Sprint Inside Tips on Parts and Construction

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL/BK-820-30827 Revised 8/23/01 Inside Tips on Parts and Construction Written by: Robert Haehnel 2 Parts is Parts: So you are ready to build the ultimate JSS car. You have the perfect design, and the ultimate gear ratio and tire size combination. But you just visited every hobby store in the Upper Valley and could not find a single gear or pulley that would fit your motor. Now what do you do? It is time to cannibalize! The best place to find gears and pulleys of all different sizes is in old

  12. Method for construction of normalized cDNA libraries

    DOE Patents [OSTI]

    Soares, M.B.; Efstratiadis, A.

    1996-01-09

    This invention provides a method to normalize a directional cDNA library constructed in a vector that allows propagation in single-stranded circle form. The method comprises: (a) propagating the directional cDNA library in single-stranded circles; (b) generating fragments complementary to the 3` noncoding sequence of the single-stranded circles in the library to produce partial duplexes; (c) purifying the partial duplexes; (d) melting and reassociating the purified partial duplexes to moderate Cot; and (e) purifying the unassociated single-stranded circles, thereby generating a normalized cDNA library. 4 figs.

  13. OMB Approval No. 0348-0041 BUDGET INFORMATION - Construction Programs

    Energy Savers [EERE]

    OMB Approval No. 0348-0041 BUDGET INFORMATION - Construction Programs NOTE: Certain Federal assistance programs require additional computations to arrive at the Federal share of project costs eligible for participation. If such is the case, you will be notified. COST CLASSIFICATION a. Total Cost b. Costs Not Allowable for Participation c. Total Allowable Costs (Columns a-b) 1 Administrative and legal expenses $0.00 $0.00 $0.00 2 Land, structures, rights-of-way, appraisals, etc. $0.00 $0.00

  14. SPALLATION NEUTRON SOURCE RING-DESIGN AND CONSTRUCTION SUMMARY.

    SciTech Connect (OSTI)

    WEI,J.

    2005-05-16

    After six years, the delivery of components for the Spallation Neutron Source (SNS) accumulator ring (AR) and the transport lines was completed in Spring 2005. Designed to deliver 1.5 MW beam power (1.5 x 10{sup 14} protons of 1 GeV kinetic energy at a repetition rate of 60 Hz), stringent measures were implemented in the fabrication, test, and assembly to ensure the quality of the accelerator systems. This paper summarizes the design, R&D, and construction of the ring and transport systems.

  15. Control Surveys for Underground Construction of the Superconducting Super Collider

    SciTech Connect (OSTI)

    Greening, W.J.Trevor; Robinson, Gregory L.; Robbins, Jeffrey S.; Ruland, Robert E.; /SLAC

    2005-08-16

    Particular care had to be taken in the design and implementation of the geodetic control systems for the Superconducting Super Collider (SSC) due to stringent accuracy requirements, the demanding tunneling schedule, long duration and large size of the construction effort of the project. The surveying requirements and the design and implementation of the surface and underground control scheme for the precise location of facilities which include approximately 120 km of bored tunnel are discussed. The methodology used for the densification of the surface control networks, the technique used for the transfer of horizontal and vertical control into the underground facilities, and the control traverse scheme employed in the tunnels is described.

  16. Design, construction and evaluation of a simulated geothermal flow system

    SciTech Connect (OSTI)

    Mackanic, J.C.

    1980-07-28

    A system was designed and built to simulate the flow from a geothermal well. The simulated flow will be used to power a Lysholm engine, the performance of which will then be evaluated for different simulated geothermal flows. Two main subjects are covered: 1) the design, construction and evaluation of the behavior of the system that simulates the geothermal flow; included in that topic is a discussion of the probable behavior of the Lysholm engine when it is put into operation, and 2) the investigation of the use of dynamic modeling techniques to determine whether they can provide a suitable means for predicting the behavior of the system.

  17. Field Testing of Compartmentalization Methods for Multifamily Construction

    SciTech Connect (OSTI)

    Ueno, K.; Lstiburek, J. W.

    2015-03-01

    The 2012 International Energy Conservation Code (IECC) has an airtightness requirement of 3 air changes per hour at 50 Pascals test pressure (3 ACH50) for single-family and multifamily construction (in climate zones 3–8). The Leadership in Energy & Environmental Design certification program and ASHRAE Standard 189 have comparable compartmentalization requirements. ASHRAE Standard 62.2 will soon be responsible for all multifamily ventilation requirements (low rise and high rise); it has an exceptionally stringent compartmentalization requirement. These code and program requirements are driving the need for easier and more effective methods of compartmentalization in multifamily buildings.

  18. Construction safety program for the National Ignition Facility, Appendix A

    SciTech Connect (OSTI)

    Cerruti, S.J.

    1997-06-26

    Topics covered in this appendix include: General Rules-Code of Safe Practices; 2. Personal Protective Equipment; Hazardous Material Control; Traffic Control; Fire Prevention; Sanitation and First Aid; Confined Space Safety Requirements; Ladders and Stairways; Scaffolding and Lift Safety; Machinery, Vehicles, and Heavy Equipment; Welding and Cutting-General; Arc Welding; Oxygen/Acetylene Welding and Cutting; Excavation, Trenching, and Shoring; Fall Protection; Steel Erection; Working With Asbestos; Radiation Safety; Hand Tools; Electrical Safety; Nonelectrical Work Performed Near Exposed High-Voltage Power-Distribution Equipment; Lockout/Tagout Requirements; Rigging; A-Cranes; Housekeeping; Material Handling and Storage; Lead; Concrete and Masonry Construction.

  19. TaC Studios New Construction Test House

    SciTech Connect (OSTI)

    Butler, T.; Curtis, O.; Kim, E.; Roberts, S.; Stephenson, R.

    2013-03-01

    As part of the NAHB Research Center Industry Partnership, Southface partnered with TaC Studios, an Atlanta based architecture firm specializing in residential and light commercial design, on the construction of a new test home in Atlanta, GA, in the mixed humid climate zone. This home will serve as a model home for the builder partner and addresses Building America energy savings targets through the planning and implementation of a design package will serve as a basis of design for the builder partner’s future homes. As a BA test house, this home will be evaluated to detail whole house energy use, end use loads, and HVAC and hot water efficiency.

  20. TaC Studios New Construction Test House

    SciTech Connect (OSTI)

    Butler, T.; Curtis, O.; Kim, E.; Roberts, S.; Stephenson, R.

    2013-03-01

    As part of the NAHB Research Center Industry Partnership, Southface partnered with TaC Studios, an Atlanta based architecture firm specializing in residential and light commercial design, on the construction of a new test home in Atlanta, GA in the mixed humid climate zone. This home will serve as a model home for the builder partner and addresses Building America energy savings targets through the planning and implementation of a design package will serve as a basis of design for the builder partner's future homes. As a BA test house, this home will be evaluated to detail whole house energy use, end use loads, and HVAC and hot water efficiency.

  1. A recipe for the construction of confidence limits

    SciTech Connect (OSTI)

    Iain A Bertram et al.

    2000-04-12

    In this note, the authors present the recipe recommended by the Search Limits Committee for the construction of confidence intervals for the use of D0 collaboration. In another note, currently in preparation, they present the rationale for this recipe, a critique of the current literature on this topic, and several examples of the use of the method. This note is intended to fill the need of the collaboration to have a reference available until the more complete note is finished. Section 2 introduces the notation used in this note, and Section 3 contains the suggested recipe.

  2. 200W Pump and Treat Construction Schedule Review

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    W Pump and Treat Construction Schedule Review Section C.2.5.3 - Task Order 11-001 The contractor shall provide the following project independent review services, as requested and as described below.. The Contractor shall perform these services in accordance with Contract DE-AC06-09RL14728, C.2.5.3, Portfolio Management, meet milestones and delivery schedules as established by the AMCP Groundwater and Vadose Zone Remediation Project team, and comply with established criteria. Task 200W P&T-1

  3. Alternatives to lumber and plywood in home construction

    SciTech Connect (OSTI)

    Lund, E.

    1993-04-01

    The diminished supply and unstable price of lumber is compelling designers, builders, and developers to explore alternative materials for residential construction. The report discusses several commercially available alternative materials or building systems that may be used in framing and sheathing, including: engineered wood products; laminated fiberboard that can be used for sheathing walls; light-gauge structural steel components for floors, walls and roof systems; foam core structure sandwich panels for walls and roofs; and a variety of concrete and concrete block systems, many of which include insulation material.

  4. World pipeline construction to slip for 1994 and beyond

    SciTech Connect (OSTI)

    Koen, A.D.; True, W.R.

    1994-02-07

    World pipeline construction planned in 1994 and beyond has fallen in the past year, reflecting uncertainties in energy markets. Still, significant expansions are under way or planned for Latin America, Asia and the Pacific regions, and Europe. Latest Oil and Gas Journal data, derived from its survey of world pipeline operators, industry sources, and published information, show more than 55,000 miles of crude oil, product, and natural gas pipeline planned for 1994 and beyond. The data include projections for pipeline construction in Russia and former republics of the Soviet Union. Western Russia and all countries west of the Ural Mountains are included under totals for Europe, eastern Russia and countries east of the Urals under totals for the Asia-Pacific region. The paper discusses the following: European gas lines; North Sea projects; Gulf of Thailand; Yacheng subsea pipeline; Australian gas lines; other Asian lines; Russian activity; Algeria-Europe gas lines; Southeast US; Gulf gathering systems; Western US; South America; Trans-Ecuadorian expansion; Chilean gas network; and Bolivia-Brazil gas line.

  5. Construction of Industrial Electron Beam Plant for Wastewater Treatment

    SciTech Connect (OSTI)

    Han, B.; Kim, J.; Kim, Y.; Kim, S.; Lee, M.; Choi, J.; Ahn, S.; Makarov, I.E.; Ponomarev, A.V.

    2004-10-06

    A pilot plant for treating 1,000 m3/day of dyeing wastewater with e-beam has been constructed and operated since 1998 in Daegu, Korea together with the biological treatment facility. The wastewater from various stages of the existing purification process has been treated with electron beam in this plant, and it gave rise to elaborate the optimal technology of the electron beam treatment of wastewater with increased reliability at instant changes in the composition of wastewater. Installation of the e-beam pilot plant resulted in decolorizing and destructive oxidation of organic impurities in wastewater, appreciable to reduction of chemical reagent consumption, in reduction of the treatment time, and in increase in flow rate limit of existing facilities by 30-40%. Industrial plant for treating 10,000 m3/day, based upon the pilot experimental result, is under construction and will be finished by 2005. This project is supported by the International Atomic Energy Agency (IAEA) and Korean Government.

  6. Constructing the S-matrix With Complex Factorization

    SciTech Connect (OSTI)

    Schuster, Philip C.; Toro, Natalia; /Stanford U., ITP

    2009-06-19

    A remarkable connection between BCFW recursion relations and constraints on the S-matrix was made by Benincasa and Cachazo in 0705.4305, who noted that mutual consistency of different BCFW constructions of four-particle amplitudes generates nontrivial (but familiar) constraints on three-particle coupling constants - these include gauge invariance, the equivalence principle, and the lack of non-trivial couplings for spins > 2. These constraints can also be derived with weaker assumptions, by demanding the existence of four-point amplitudes that factorize properly in all unitarity limits with complex momenta. From this starting point, we show that the BCFW prescription can be interpreted as an algorithm for fully constructing a tree-level S-matrix, and that complex factorization of general BCFW amplitudes follows from the factorization of four-particle amplitudes. The allowed set of BCFW deformations is identified, formulated entirely as a statement on the three-particle sector, and using only complex factorization as a guide. Consequently, our analysis based on the physical consistency of the S-matrix is entirely independent of field theory. We analyze the case of pure Yang-Mills, and outline a proof for gravity. For Yang-Mills, we also show that the well-known scaling behavior of BCFW-deformed amplitudes at large z is a simple consequence of factorization. For gravity, factorization in certain channels requires asymptotic behavior {approx} 1/z{sup 2}.

  7. Unique Construction and Social Experiences in Residential Remediation Sites - 13423

    SciTech Connect (OSTI)

    Jung, Paul; Scarborough, Rebecca

    2013-07-01

    Sevenson Environmental Services, Inc., (Sevenson) has performed several radiological remediation projects located in residential urban areas. Over the course of these projects, there has been a wide variety of experiences encountered from construction related issues to unique social situations. Some of the construction related issues included the remediation of interior basements where contaminated material was located under the footers of the structure or was used in the mortar between cinder block or field stone foundations. Other issues included site security, maintaining furnaces or other utilities, underpinning, backfilling and restoration. In addition to the radiological hazards associated with this work there were occupational safety and industrial hygiene issues that had to be addressed to ensure the safety and health of neighboring properties and residents. The unique social situations at these job sites have included arson, theft/stolen property, assault/battery, prostitution, execution of arrest warrants for residents, discovery of drugs and paraphernalia, blood borne pathogens, and unexploded ordnance. Some of these situations have become a sort of comical urban legend throughout the organization. One situation had historical significance, involving the demolition of a house to save a tree older than the Declaration of Independence. All of these projects typically involve the excavation of early 20. century items such as advertisement signs, various old bottles (milk, Listerine, perfume, whisky) and other miscellaneous common trash items. (authors)

  8. Ontario hydro integrated programs for plant design and construction

    SciTech Connect (OSTI)

    Oreskovich, J.P.; Somerville, R.L.

    1987-01-01

    Integrated programs for plant design and construction (IPPDC) is a 5-yr program at Ontario Hydro to optimize engineering and construction productivity through better use of computer technology. The proportion of computer programs operating with data derived from an integrated common data base is very low. IPPDC, on the other hand, is greatly concerned with this common data base. The goals of the IPPDC include improvement of the information flow for a project, minimization of site-discovered interferences, and compression of the entire project life cycle through the intelligent use of computer technology. This program focuses on the development of an integrated data base for plant design software systems to service a multi discipline engineering environment as required by a large-scale megaproject. To achieve the goals of IPPDC, there are three basic elements of computer technology that must be in place before a totally integrated data base system can be achieved: (1) data management; (2) networking; and (3) three-dimensional modeling.

  9. Constructal method to optimize solar thermochemical reactor design

    SciTech Connect (OSTI)

    Tescari, S.; Mazet, N.; Neveu, P.

    2010-09-15

    The objective of this study is the geometrical optimization of a thermochemical reactor, which works simultaneously as solar collector and reactor. The heat (concentrated solar radiation) is supplied on a small peripheral surface and has to be dispersed in the entire reactive volume in order to activate the reaction all over the material. A similarity between this study and the point to volume problem analyzed by the constructal approach (Bejan, 2000) is evident. This approach was successfully applied to several domains, for example for the coupled mass and conductive heat transfer (Azoumah et al., 2004). Focusing on solar reactors, this work aims to apply constructal analysis to coupled conductive and radiative heat transfer. As a first step, the chemical reaction is represented by a uniform heat sink inside the material. The objective is to optimize the reactor geometry in order to maximize its efficiency. By using some hypothesis, a simplified solution is found. A parametric study provides the influence of different technical and operating parameters on the maximal efficiency and on the optimal shape. Different reactor designs (filled cylinder, cavity and honeycomb reactors) are compared, in order to determine the most efficient structure according to the operating conditions. Finally, these results are compared with a CFD model in order to validate the assumptions. (author)

  10. Y-12 Sustainable Design Principles for Building Design and Construction

    SciTech Connect (OSTI)

    Jackson, J. G.

    2008-11-01

    B&W Y-12 is committed to modernizing the Y-12 complex to meet future needs with a sustainable and responsive infrastructure and to integrating sustainability principles and practices into Y-12 work (Y72-001, B&W Y-12 Environmental, Safety and Health Policy). This commitment to sustainability and specifically sustainable design of buildings is also incorporated into Presidential Executive Orders (EO), DOE Orders (DOE O), and goals. Sustainable building design is an approach to design, construct, and operate facilities in an efficient and environmentally sound manner that will produce a healthful, resource-efficient and productive working environment that is inherently protective of the environment. The DOE has established the following 5 Guiding Principles for High Performance Sustainable Building (HPSB), and has issued directives that require Y-12 to incorporate the principles and a number of supporting specific practices and techniques into building design, construction and renovation projects: (1) Employ Integrated Design Principles; (2) Optimize Energy Performance; (3) Protect and Conserve Water; (4) Enhance Indoor Environmental Quality; and (5) Reduce Environmental Impact of Materials. The purpose of this document is to present the required sustainable building principles, practices and techniques, summarize the key drivers for incorporating them into Y-12 projects, and present additional recommendations and resources that can be used to support sustainable buildings to enhance the environmental and economic performance of the Y-12 Complex.

  11. Pyramiding tumuli waste disposal site and method of construction thereof

    DOE Patents [OSTI]

    Golden, Martin P.

    1989-01-01

    An improved waste disposal site for the above-ground disposal of low-level nuclear waste as disclosed herein. The disposal site is formed from at least three individual waste-containing tumuli, wherein each tumuli includes a central raised portion bordered by a sloping side portion. Two of the tumuli are constructed at ground level with adjoining side portions, and a third above-ground tumulus is constructed over the mutually adjoining side portions of the ground-level tumuli. Both the floor and the roof of each tumulus includes a layer of water-shedding material such as compacted clay, and the clay layer in the roofs of the two ground-level tumuli form the compacted clay layer of the floor of the third above-ground tumulus. Each tumulus further includes a shield wall, preferably formed from a solid array of low-level handleable nuclear wate packages. The provision of such a shield wall protects workers from potentially harmful radiation when higher-level, non-handleable packages of nuclear waste are stacked in the center of the tumulus.

  12. Energy Evaluation of a New Construction Pilot Community: Fresno, California

    SciTech Connect (OSTI)

    Burdick, A.; Poerschke, A.; Rapport, A.; Wayne, M.

    2014-06-01

    A new construction pilot community was constructed by builder-partner Wathen-Castanos Hybrid Homes based on a single occupied test house that was designed to achieve greater than 30% energy savings with respect to the Building America House Simulation Protocols developed by NREL. Builders face several key problems when implementing a whole-house systems integrated measures package from a single test house into multiple houses. This report addresses factors of implementation and scalability at the community scale and proposes methodologies by which community-scale energy evaluations can be performed based on results at the occupied test house level. Research focused on the builder and trade implementation of a measures package and the actual utility usage in the houses at the community scale of production. Five occupants participated in this research by providing utility bills and information on occupancy and miscellaneous gas and electric appliance use for their houses. IBACOS used these utility data and background information to analyze the actual energy performance of the houses. The actual utility bill readings were compared to projected energy consumption using BEopt with actual weather and thermostat set points for normalization.

  13. 241-AW Tank Farm Construction Extent of Condition Review for Tank Integrity

    SciTech Connect (OSTI)

    Barnes, Travis J.; Gunter, Jason R.; Reeploeg, Gretchen E.

    2013-11-19

    This report provides the results of an extent of condition construction history review for the 241-AW tank farm. The construction history of the 241-AW tank farm has been reviewed to identify issues similar to those experienced during tank AY-102 construction. Those issues and others impacting integrity are discussed based on information found in available construction records, using tank AY-102 as the comparison benchmark. In the 241-AW tank farm, the fourth double-shell tank farm constructed, similar issues as those with tank 241-AY-102 construction occured. The overall extent of similary and affect on 241-AW tank farm integrity is described herein.

  14. 241-AY-101 Tank Construction Extent of Condition Review for Tank Integrity

    SciTech Connect (OSTI)

    Barnes, Travis J.; Gunter, Jason R.

    2013-08-26

    This report provides the results of an extent of condition construction history review for tank 241-AY-101. The construction history of tank 241-AY-101 has been reviewed to identify issues similar to those experienced during tank AY-102 construction. Those issues and others impacting integrity are discussed based on information found in available construction records, using tank AY-102 as the comparison benchmark. In tank 241-AY-101, the second double-shell tank constructed, similar issues as those with tank 241-AY-102 construction reoccurred. The overall extent of similary and affect on tank 241-AY-101 integrity is described herein.

  15. Construction and operation of the Howard T. Ricketts Laboratory.

    SciTech Connect (OSTI)

    Van Lonkhuyzen, R.; Stull, L.; Butler, J.; Chang, Y.; Allison, T.; O'Rourke, D.

    2006-01-01

    The National Institutes of Health (NIH) has proposed to partially fund the construction of the Howard T. Ricketts (HTR) regional biocontainment laboratory (RBL) by the University of Chicago at the U.S. Department of Energy's (DOE's) Argonne National Laboratory in Argonne, Illinois. The HTR Laboratory (HTRL) would be constructed, owned, and operated by the University of Chicago on land leased to it by DOE. The preferred project site is located north of Eastwood Drive and west of Outer Circle Road and is near the biological sciences building. This environmental assessment addresses the potential environmental effects resulting from construction and operation of the proposed facility. The proposed project involves the construction of a research facility with a footprint up to approximately 44,000 ft{sup 2} (4,088 m{sup 2}). The proposed building would house research laboratories, including Biosafety Level 2 and 3 biocontainment space, animal research facilities, administrative offices, and building support areas. The NIH has identified a need for new facilities to support research on potential bioterrorism agents and emerging and re-emerging infectious diseases, to protect the nation from such threats to public health. This research requires specialized laboratory facilities that are designed, managed, and operated to protect laboratory workers and the surrounding community from accidental exposure to agents. The proposed HTRL would provide needed biocontainment space to researchers and promote the advancement of knowledge in the disciplines of biodefense and emerging and re-emerging infectious diseases. Several alternatives were considered for the location of the proposed facility, as well as a no action alternative. The preferred alternative includes the construction of a research facility, up to 44,000 ft{sup 2} (4,088 m{sup 2}), at Argonne National Laboratory, a secure government location. Potential impacts to natural and cultural resources have been evaluated in this document. The proposed activities would result in the conversion of approximately 4 acres (2 ha) of old field and open woodland for the proposed facility and landscaped areas. Impacts of the proposed project on the following resources would be minor or negligible: human health, socioeconomics, air quality, noise levels, water quality, waste management, land use, the visual environment, cultural resources, soils, terrestrial biota, wetlands or aquatic biota, threatened and endangered species, transportation, utilities and services, and environmental justice. This environmental assessment has been completed to satisfy the requirements of the National Environmental Policy Act of 1969 and has been prepared in accordance with NIH guidelines and in coordination with federal, state, and local agency requirements. On the basis of the results of this assessment, impacts to environmental resources from the proposed project would be minor or negligible, provided that the project is implemented in accordance with the impact avoidance and mitigation measures described herein.

  16. Thick Concrete Specimen Construction, Testing, and Preliminary Analysis

    SciTech Connect (OSTI)

    Clayton, Dwight A.; Hoegh, Kyle; Khazanovich, Lev

    2015-03-01

    The purpose of the U.S. Department of Energy Office of Nuclear Energy’s Light Water Reactor Sustainability (LWRS) Program is to develop technologies and other solutions that can improve the reliability, sustain the safety, and extend the operating lifetimes of nuclear power plants (NPPs) beyond 60 years. Since many important safety structures in an NPP are constructed of concrete, inspection techniques must be developed and tested to evaluate the internal condition. In-service containment structures generally do not allow for the destructive measures necessary to validate the accuracy of these inspection techniques. This creates a need for comparative testing of the various nondestructive evaluation (NDE) measurement techniques on concrete specimens with known material properties, voids, internal microstructure flaws, and reinforcement locations. A preliminary report detailed some of the challenges associated with thick reinforced concrete sections and prioritized conceptual designs of specimens that could be fabricated to represent NPP concrete structures for using in NDE evaluation comparisons. This led to the construction of the concrete specimen presented in this report, which has sufficient reinforcement density and cross-sectional size to represent an NPP containment wall. Details on how a suitably thick concrete specimen was constructed are presented, including the construction materials, final nominal design schematic, as well as formwork and rigging required to safely meet the desired dimensions of the concrete structure. The report also details the type and methods of forming the concrete specimen as well as information on how the rebar and simulated defects were embedded. Details on how the resulting specimen was transported, safely anchored, and marked to allow access for systematic comparative NDE testing of defects in a representative NPP containment wall concrete specimen are also given. Data collection using the MIRA Ultrasonic NDE equipment and initial results are also presented along with a discussion of the preliminary findings. Comparative NDE of various defects in reinforced concrete specimens is a key component in identifying the most promising techniques and directing the research and development efforts needed to characterize concrete degradation in commercial NPPs. This requires access to the specimens for data collection using state-of-the-art technology. The construction of the specimen detailed in this report allows for an evaluation of how different NDE techniques may interact with the size and complexities of NPP concrete structures. These factors were taken into account when determining specimen size and features to ensure a realistic design. The lateral dimensions of the specimen were also chosen to mitigate unrealistic boundary effects that would not affect the results of field NPP concrete testing. Preliminary results show that, while the current methods are able to identify some of the deeper defects, improvements in data processing or hardware are necessary to be able to achieve the precision and reliability achieved in evaluating thinner and less heavily reinforced concrete structures.

  17. Microsoft PowerPoint - TrafficSafetyBriefing FINAL.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 South and Beloit Avenue (Rattlesnake Barricade entrance off Highway 240) - Allows for safer access for the Benton County Sheriff's Office to perform safety enforcement actions...

  18. Diesel Particulate Filter Technology for Low-Temperature and...

    Broader source: Energy.gov (indexed) [DOE]

    Applications Part 1 Aftertreatment Modeling Status, Futur Potential, and Application Issues Exhaust Aftertreatment and Low Pressure Loop EGR Applied to an Off-Highway Engine

  19. Evaluation of Passive and Active Soot Filters for Removal of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Devices on the Emission Profiles of Trucks and Buses Exhaust Aftertreatment and Low Pressure Loop EGR Applied to an Off-Highway Engine Active Soot Filter Regeneration...

  20. Development and Demonstration of an Electronic Particulate Matter...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Aftertreatment and Low Pressure Loop EGR Applied to an Off-Highway Engine Advanced Radio Frequency-Based Sensors for Monitoring Diesel Particulate Filter Loading and ...

  1. File:07NVAPermitToConstructAndPermitToOperate (3).pdf | Open...

    Open Energy Info (EERE)

    07NVAPermitToConstructAndPermitToOperate (3).pdf Jump to: navigation, search File File history File usage Metadata File:07NVAPermitToConstructAndPermitToOperate (3).pdf Size of...

  2. File:08-CA-f - Permit to Construct.pdf | Open Energy Information

    Open Energy Info (EERE)

    8-CA-f - Permit to Construct.pdf Jump to: navigation, search File File history File usage Metadata File:08-CA-f - Permit to Construct.pdf Size of this preview: 463 599 pixels....

  3. File:03AKGUtilityPermitToConstructOnADOTROW (1).pdf | Open Energy...

    Open Energy Info (EERE)

    03AKGUtilityPermitToConstructOnADOTROW (1).pdf Jump to: navigation, search File File history File usage Metadata File:03AKGUtilityPermitToConstructOnADOTROW (1).pdf Size of this...

  4. File:06AKFUtilityPermitToConstructOnADOTROW (1).pdf | Open Energy...

    Open Energy Info (EERE)

    AKFUtilityPermitToConstructOnADOTROW (1).pdf Jump to: navigation, search File File history File usage File:06AKFUtilityPermitToConstructOnADOTROW (1).pdf Size of this preview: 463...

  5. File:07ORAStatePlantConstruction (1).pdf | Open Energy Information

    Open Energy Info (EERE)

    07ORAStatePlantConstruction (1).pdf Jump to: navigation, search File File history File usage Metadata File:07ORAStatePlantConstruction (1).pdf Size of this preview: 463 599...

  6. File:07PowerPlantSitingConstructionOverview (2).pdf | Open Energy...

    Open Energy Info (EERE)

    7PowerPlantSitingConstructionOverview (2).pdf Jump to: navigation, search File File history File usage File:07PowerPlantSitingConstructionOverview (2).pdf Size of this preview: 463...

  7. File:GeneralConstructionPermiUTR3000000t.pdf | Open Energy Information

    Open Energy Info (EERE)

    GeneralConstructionPermiUTR3000000t.pdf Jump to: navigation, search File File history File usage File:GeneralConstructionPermiUTR3000000t.pdf Size of this preview: 465 600...

  8. File:06HIBHawaiiConstructionStormWaterPermit.pdf | Open Energy...

    Open Energy Info (EERE)

    6HIBHawaiiConstructionStormWaterPermit.pdf Jump to: navigation, search File File history File usage Metadata File:06HIBHawaiiConstructionStormWaterPermit.pdf Size of this preview:...

  9. File:07AKAPowerPlantSitingConstruction.pdf | Open Energy Information

    Open Energy Info (EERE)

    AKAPowerPlantSitingConstruction.pdf Jump to: navigation, search File File history File usage Metadata File:07AKAPowerPlantSitingConstruction.pdf Size of this preview: 463 599...

  10. File:07IDAPowerPlantSitingConstruction.pdf | Open Energy Information

    Open Energy Info (EERE)

    7IDAPowerPlantSitingConstruction.pdf Jump to: navigation, search File File history File usage Metadata File:07IDAPowerPlantSitingConstruction.pdf Size of this preview: 463 599...

  11. Construction of block-coil high-field model dipoles for future...

    Office of Scientific and Technical Information (OSTI)

    Conference: Construction of block-coil high-field model dipoles for future hadron colliders Citation Details In-Document Search Title: Construction of block-coil high-field model ...

  12. Construction Begins on DOE-Sponsored Carbon-Capture Project at...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Construction Begins on DOE-Sponsored Carbon-Capture Project at Kentucky Power Plant Construction Begins on DOE-Sponsored Carbon-Capture Project at Kentucky Power Plant July 21, ...

  13. NMAC 20.2.72 Air Quality Construction Permits | Open Energy Informatio...

    Open Energy Info (EERE)

    2 Air Quality Construction Permits Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: NMAC 20.2.72 Air Quality Construction...

  14. File:S-38-Well-Construction-and-Modification-Permit.pdf | Open...

    Open Energy Info (EERE)

    S-38-Well-Construction-and-Modification-Permit.pdf Jump to: navigation, search File File history File usage File:S-38-Well-Construction-and-Modification-Permit.pdf Size of this...

  15. RCW - 77.55 - Construction Projects in State Waters | Open Energy...

    Open Energy Info (EERE)

    77.55 - Construction Projects in State Waters Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: RCW - 77.55 - Construction...

  16. File:06-WA-b - Washington Construction Storm Water Permit.pdf...

    Open Energy Info (EERE)

    6-WA-b - Washington Construction Storm Water Permit.pdf Jump to: navigation, search File File history File usage Metadata File:06-WA-b - Washington Construction Storm Water...

  17. MidAmerican Energy (Gas and Electric)- Commercial New Construction Energy-Efficiency Program

    Broader source: Energy.gov [DOE]

    MidAmerican Energy's Commercial New Construction Program offers incentives to businesses for energy-efficient construction and design of new or pre-existing buildings.  A minimum energy savings of...

  18. SRNL RADIONUCLIDE FIELD LYSIMETER EXPERIMENT: BASELINE CONSTRUCTION AND IMPLEMENTATION

    SciTech Connect (OSTI)

    Roberts, K.; Kaplan, D.; Bagwell, L.; Powell, B.; Almond, P.; Emerson, H.; Hixon, A.; Jablonski, J.; Buchanan, C.; Waterhouse, T.

    2012-10-17

    The purpose of this document is to compile information regarding experimental design, facility design, construction, radionuclide source preparation, and path forward for the ten year Savannah River National Laboratory (SRNL) Radionuclide Field Lysimeter Experiment at the Savannah River Site (SRS). This is a collaborative effort by researchers at SRNL and Clemson University. The scientific objectives of this study are to: Study long-term radionuclide transport under conditions more representative of vadose zone conditions than laboratory experiments; Provide more realistic quantification of radionuclide transport and geochemistry in the vadose zone, providing better information pertinent to radioactive waste storage solutions than presently exists; Reduce uncertainty and improve justification for geochemical models such as those used in performance assessments and composite analyses.

  19. Method and apparatus for constructing an underground barrier wall structure

    DOE Patents [OSTI]

    Dwyer, Brian P.; Stewart, Willis E.; Dwyer, Stephen F.

    2002-01-01

    A method and apparatus for constructing a underground barrier wall structure using a jet grout injector subassembly comprising a pair of primary nozzles and a plurality of secondary nozzles, the secondary nozzles having a smaller diameter than the primary nozzles, for injecting grout in directions other than the primary direction, which creates a barrier wall panel having a substantially uniform wall thickess. This invention addresses the problem of the weak "bow-tie" shape that is formed during conventional jet injection when using only a pair of primary nozzles. The improvement is accomplished by using at least four secondary nozzles, of smaller diameter, located on both sides of the primary nozzles. These additional secondary nozzles spray grout or permeable reactive materials in other directions optimized to fill in the thin regions of the bow-tie shape. The result is a panel with increased strength and substantially uniform wall thickness.

  20. Method for construction of normalized cDNA libraries

    DOE Patents [OSTI]

    Soares, Marcelo B.; Efstratiadis, Argiris

    1998-01-01

    This invention provides a method to normalize a directional cDNA library constructed in a vector that allows propagation in single-stranded circle form comprising: (a) propagating the directional cDNA library in single-stranded circles; (b) generating fragments complementary to the 3' noncoding sequence of the single-stranded circles in the library to produce partial duplexes; (c) purifying the partial duplexes; (d) melting and reassociating the purified partial duplexes to appropriate Cot; and (e) purifying the unassociated single-stranded circles, thereby generating a normalized cDNA library. This invention also provides normalized cDNA libraries generated by the above-described method and uses of the generated libraries.

  1. Hybrid Wall Construction and Quality Control Issues in Wyandotte, Michigan

    SciTech Connect (OSTI)

    Lukachko, A.; Grin, A.; Bergey, D.

    2013-12-01

    This report is the second report on the Wyandotte Neighborhood Stabilization Program 2 project in Wyandotte, MI, and documents refinements to the design, construction, and quality control for the high R-value enclosure. The report will be of interest to designers and builders of production housing in Cold Climates. The focus of the second round of research was on using the hybrid insulation approach to develop a reliable method of achieving consistently low airtightness numbers. There are two primary outcomes from this research. First, the airtightness measurements demonstrate that with a shallow learning curve, even new builders entering the program having little experience with the technology package are able to achieve consistent results that are less than 1.5 ACH50. Second, the process changes implemented to help secure these results were straightforward and ended up encouraging better communication between designer, builder, and the city officials supervising the project.

  2. Sorption of tritium and tritiated water on construction materials

    SciTech Connect (OSTI)

    Dickson, R.S.; Miller, J.M. . Chalk River Nuclear Labs.)

    1992-03-01

    In this paper, sorption and desorption of tritium (HT) and tritiated water (HTO) on materials to be used in the construction of fusion facilities are studied. In ca. 24-hour exposures in argon or room air, metal samples sorbed 8-200 {mu}Ci/m{sup 2} (1 Ci = 3.7 {times} 10{sup 10} Bq) of tritium form atmospheres of 5-9 Ci/m{sup 3} HT, and non-metallic samples sorbed 60-800 {mu}Ci/m{sup 2} from atmospheres of 14 Ci/m{sup 3} HT. Sorption of HTO varied much more widely than HT sorption for different samples, ranging from 4 {mu}Ci/m{sup 2} for glass to 1,300,000 {mu}Ci/m{sup 3} HTO in room air. Time dependence of desorption in dry air showed a rapid initial process and a slower secondary process.

  3. Method for construction of normalized cDNA libraries

    DOE Patents [OSTI]

    Soares, M.B.; Efstratiadis, A.

    1998-11-03

    This invention provides a method to normalize a directional cDNA library constructed in a vector that allows propagation in single-stranded circle form comprising: (a) propagating the directional cDNA library in single-stranded circles; (b) generating fragments complementary to the 3` noncoding sequence of the single-stranded circles in the library to produce partial duplexes; (c) purifying the partial duplexes; (d) melting and reassociating the purified partial duplexes to appropriate Cot; and (e) purifying the unassociated single-stranded circles, thereby generating a normalized cDNA library. This invention also provides normalized cDNA libraries generated by the above-described method and uses of the generated libraries. 19 figs.

  4. Geopolymer concretes: a green construction technology rising from the ash

    SciTech Connect (OSTI)

    Allouche, E.

    2009-07-01

    Researchers at Louisiana Tech University have embarked on a multi-year research initiative to develop applications for inorganic polymer concrete, or geopolymer concrete, in the area of civil construction, and to bring solve of these applications to market. One objective was to produce a spray-on coating for use in the harsh environment of wastewater conveyance and treatment facilities. Another project is to establish relationships between fly ash composition and particle size distribution and the mechanical attributes and workability of the resulting geopolymer concrete. A third project is to develop a 'smart' geopolymer concrete whose response to a given electric current can be correlated to the stress level to which the structure is subjected. 1 fig., 6 photos.

  5. Constructing a logical, regular axis topology from an irregular topology

    DOE Patents [OSTI]

    Faraj, Daniel A.

    2014-07-22

    Constructing a logical regular topology from an irregular topology including, for each axial dimension and recursively, for each compute node in a subcommunicator until returning to a first node: adding to a logical line of the axial dimension a neighbor specified in a nearest neighbor list; calling the added compute node; determining, by the called node, whether any neighbor in the node's nearest neighbor list is available to add to the logical line; if a neighbor in the called compute node's nearest neighbor list is available to add to the logical line, adding, by the called compute node to the logical line, any neighbor in the called compute node's nearest neighbor list for the axial dimension not already added to the logical line; and, if no neighbor in the called compute node's nearest neighbor list is available to add to the logical line, returning to the calling compute node.

  6. Constructing a logical, regular axis topology from an irregular topology

    DOE Patents [OSTI]

    Faraj, Daniel A.

    2014-07-01

    Constructing a logical regular topology from an irregular topology including, for each axial dimension and recursively, for each compute node in a subcommunicator until returning to a first node: adding to a logical line of the axial dimension a neighbor specified in a nearest neighbor list; calling the added compute node; determining, by the called node, whether any neighbor in the node's nearest neighbor list is available to add to the logical line; if a neighbor in the called compute node's nearest neighbor list is available to add to the logical line, adding, by the called compute node to the logical line, any neighbor in the called compute node's nearest neighbor list for the axial dimension not already added to the logical line; and, if no neighbor in the called compute node's nearest neighbor list is available to add to the logical line, returning to the calling compute node.

  7. Achieving Energy Savings in Municipal Construction in Long Beach California

    SciTech Connect (OSTI)

    2013-03-01

    Long Beach Gas and Oil (LBGO), the public gas utility in Long Beach, California, partnered with the U.S. Department of Energy (DOE) to develop and implement solutions to build a new, low-energy modular office building that is at least 50% below requirements set by Energy Standard 90.1-2007 of the American Society of Heating, Refrigerating, and Air-conditioning Engineers (ASHRAE), the American National Standards Institute (ANSI), and the Illuminating Engineering Society of America (IESNA) as part of DOE’s Commercial Building Partnerships (CBP) program. The LBGO building, which demonstrates that modular construction can be very energy efficient, is expected to exceed the ASHRAE baseline by about 45%.

  8. Computer-Aided Construction of Chemical Kinetic Models

    SciTech Connect (OSTI)

    Green, William H.

    2014-12-31

    The combustion chemistry of even simple fuels can be extremely complex, involving hundreds or thousands of kinetically significant species. The most reasonable way to deal with this complexity is to use a computer not only to numerically solve the kinetic model, but also to construct the kinetic model in the first place. Because these large models contain so many numerical parameters (e.g. rate coefficients, thermochemistry) one never has sufficient data to uniquely determine them all experimentally. Instead one must work in “predictive” mode, using theoretical rather than experimental values for many of the numbers in the model, and as appropriate refining the most sensitive numbers through experiments. Predictive chemical kinetics is exactly what is needed for computer-aided design of combustion systems based on proposed alternative fuels, particularly for early assessment of the value and viability of proposed new fuels before those fuels are commercially available. This project was aimed at making accurate predictive chemical kinetics practical; this is a challenging goal which requires a range of science advances. The project spanned a wide range from quantum chemical calculations on individual molecules and elementary-step reactions, through the development of improved rate/thermo calculation procedures, the creation of algorithms and software for constructing and solving kinetic simulations, the invention of methods for model-reduction while maintaining error control, and finally comparisons with experiment. Many of the parameters in the models were derived from quantum chemistry calculations, and the models were compared with experimental data measured in our lab or in collaboration with others.

  9. Consent Order, URS Energy & Construction, Inc. - NCO-2011-02 | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy URS Energy & Construction, Inc. - NCO-2011-02 Consent Order, URS Energy & Construction, Inc. - NCO-2011-02 October 13, 2011 Issued to URS Energy & Construction, Inc., related to Quality Improvement and Work Control Program Deficiencies associated with Construction of the Sodium Bearing Waste Treatment Project at the Idaho National Laboratory On October 13, 2011, the U.S. Department of Energy (DOE) Office of Health, Safety and Security's Office of Enforcement issued a

  10. Engineering at SLAC: Designing and Constructing Experimental Devices for SSRL - Oral Presentation

    SciTech Connect (OSTI)

    Djang, Austin

    2015-08-21

    This presentation describes the design and construction of three experimental devices for the Stanford Synchrotron Radiation Lightsource.

  11. 2nd Annual National Safety Awareness Event to Prevent Falls in Construction

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy nd Annual National Safety Awareness Event to Prevent Falls in Construction 2nd Annual National Safety Awareness Event to Prevent Falls in Construction April 27, 2015 - 8:08am Addthis 2nd Annual National Safety Awareness Event to Prevent Falls in Construction As part of a Fall Prevention Campaign launched 3 years ago by the Occupational Safety and Health Administration (OSHA), the National Institute for Occupational Safety and Health, and the Center for Construction

  12. Pre-construction Activities for Phase 1 of Shu'luuk Wind Project

    SciTech Connect (OSTI)

    Connolly, Michael

    2015-07-01

    Final Report on pre-construction activities grant for the Shu'luuk Wind project on the Campo Indian Reservation

  13. Text-Alternative Version of Building America Webinar: New Construction Hybrid-Ductless Heat Pumps Study

    Broader source: Energy.gov [DOE]

    Text version of the Building America June 24 Webinar: New Construction Hybrid-Ductless Heat Pumps Study.

  14. Indoor airPLUS Construction Specifications Version 1 (Rev. 02) | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Specifications Version 1 (Rev. 02) Indoor airPLUS Construction Specifications Version 1 (Rev. 02) Indoor airPLUS Construction Specifications Version 1 (Rev. 02), November 2013, from the U.S. Environmental Protection Agency. PDF icon ch_iap.pdf More Documents & Publications Indoor airPLUS Construction Specifications

  15. Strategy Guideline. Application of a Construction Quality Process to Existing Home Retrofits

    SciTech Connect (OSTI)

    Mallay, D.; Del Bianco, M.

    2013-08-01

    The Partnership for Home Innovation developed a construction quality process for new and existing high performance homes (HPH) in which high performance goals are established, specifications to meet those goals are defined, and construction monitoring points are added to the construction schedule so that critical energy efficiency details are systematically reviewed, documented, and tested in a timely manner. This report follows the evolution of the construction quality process from its development for new homes, to its application in the construction of a high performance home with enhanced specifications, and its application in a crawlspace renovation.

  16. Strategy Guideline: Application of a Construction Quality Process to Existing Home Retrofits

    SciTech Connect (OSTI)

    Mallay, D.; Del Bianco, M.

    2013-08-01

    The Home Innovation Research Labs developed a construction quality process for new and existing high performance homes (HPH) in which high performance goals are established, specifications to meet those goals are defined, and construction monitoring points are added to the construction schedule so that critical energy efficiency details are systematically reviewed, documented, and tested in a timely manner. This report follows the evolution of the construction quality process from its development for new homes, to its application in the construction of a high performance home with enhanced specifications, and its application in a crawlspace renovation.

  17. 241-AZ Tank Farm Construction Extent of Condition Review for Tank Integrity

    SciTech Connect (OSTI)

    Barnes, Travis J.; Boomer, Kayle D.; Gunter, Jason R.; Venetz, Theodore J.

    2013-07-30

    This report provides the results of an extent of condition construction history review for tanks 241-AZ-101 and 241-AZ-102. The construction history of the 241-AZ tank farm has been reviewed to identify issues similar to those experienced during tank AY-102 construction. Those issues and others impacting integrity are discussed based on information found in available construction records, using tank AY-102 as the comparison benchmark. In the 241-AZ tank farm, the second DST farm constructed, both refractory quality and tank and liner fabrication were improved.

  18. 241-SY Tank Farm Construction Extent of Condition Review for Tank Integrity

    SciTech Connect (OSTI)

    Barnes, Travis J.; Boomer, Kayle D.; Gunter, Jason R.; Venetz, Theodore J.

    2013-07-25

    This report provides the results of an extent of condition construction history review for tanks 241-SY-101, 241-SY-102, and 241-SY-103. The construction history of the 241-SY tank farm has been reviewed to identify issues similar to those experienced during tank 241-AY-102 construction. Those issues and others impacting integrity are discussed based on information found in available construction records, using tank 241-AY-102 as the comparison benchmark. In the 241-SY tank farm, the third DST farm constructed, refractory quality and stress relief were improved, while similar tank and liner fabrication issues remained.

  19. 241-AP Tank Farm Construction Extent of Condition Review for Tank Integrity

    SciTech Connect (OSTI)

    Barnes, Travis J.; Gunter, Jason R.; Reeploeg, Gretchen E.

    2014-04-04

    This report provides the results of an extent of condition construction history review for the 241-AP tank farm. The construction history of the 241-AP tank farm has been reviewed to identify issues similar to those experienced during tank AY-102 construction. Those issues and others impacting integrity are discussed based on information found in available construction records, using tank AY-102 as the comparison benchmark. In the 241-AP tank farm, the sixth double-shell tank farm constructed, tank bottom flatness, refractory material quality, post-weld stress relieving, and primary tank bottom weld rejection were improved.

  20. Construction of energy-stable Galerkin reduced order models.

    SciTech Connect (OSTI)

    Kalashnikova, Irina; Barone, Matthew Franklin; Arunajatesan, Srinivasan; van Bloemen Waanders, Bart Gustaaf

    2013-05-01

    This report aims to unify several approaches for building stable projection-based reduced order models (ROMs). Attention is focused on linear time-invariant (LTI) systems. The model reduction procedure consists of two steps: the computation of a reduced basis, and the projection of the governing partial differential equations (PDEs) onto this reduced basis. Two kinds of reduced bases are considered: the proper orthogonal decomposition (POD) basis and the balanced truncation basis. The projection step of the model reduction can be done in two ways: via continuous projection or via discrete projection. First, an approach for building energy-stable Galerkin ROMs for linear hyperbolic or incompletely parabolic systems of PDEs using continuous projection is proposed. The idea is to apply to the set of PDEs a transformation induced by the Lyapunov function for the system, and to build the ROM in the transformed variables. The resulting ROM will be energy-stable for any choice of reduced basis. It is shown that, for many PDE systems, the desired transformation is induced by a special weighted L2 inner product, termed the %E2%80%9Csymmetry inner product%E2%80%9D. Attention is then turned to building energy-stable ROMs via discrete projection. A discrete counterpart of the continuous symmetry inner product, a weighted L2 inner product termed the %E2%80%9CLyapunov inner product%E2%80%9D, is derived. The weighting matrix that defines the Lyapunov inner product can be computed in a black-box fashion for a stable LTI system arising from the discretization of a system of PDEs in space. It is shown that a ROM constructed via discrete projection using the Lyapunov inner product will be energy-stable for any choice of reduced basis. Connections between the Lyapunov inner product and the inner product induced by the balanced truncation algorithm are made. Comparisons are also made between the symmetry inner product and the Lyapunov inner product. The performance of ROMs constructed using these inner products is evaluated on several benchmark test cases.

  1. DESIGN AND CONSTRUCTION OF A FORCE-REFLECTING TELEOPERATION SYSTEM

    SciTech Connect (OSTI)

    M.A. Ebadian, Ph.D.

    1999-01-01

    For certain applications, such as space servicing, undersea operations, and hazardous material handling tasks in nuclear reactors, the environments can be uncertain, complex, and hazardous. Lives may be in danger if humans were to work under these conditions. As a result, a man-machine system--a teleoperator system--has been developed to work in these types of environments. In a typical teleoperator system, the actual system operates at a remote site; the operator located away from this system usually receives visual information from a video image and/or graphical animation on the computer screen. Additional feedback, such as aural and force information, can significantly enhance performance of the system. Force reflection is a type of feedback in which forces experienced by the remote manipulator are fed back to the manual controller. Various control methods have been proposed for implementation on a teleoperator system. In order to examine different control schemes, a one Degree-Of-Freedom (DOF) Force-Reflecting Manual Controller (FRMC) is constructed and integrated into a PC. The system parameters are identified and constructed as a mathematical model. The Proportional-Integral-Derivative (PID) and fuzzy logic controllers are developed and tested experimentally. Numerical simulation results obtained from the mathematical model are compared with those of experimental data for both types of controllers. In addition, the concept of a telesensation system is introduced. A telesensation system is an advanced teleoperator system that attempts to provide the operator with sensory feedback. In this context, a telesensation system integrates the use of a Virtual Reality (VR) unit, FRMC, and Graphical User Interface (GUI). The VR unit is used to provide the operator with a 3-D visual effect. Various commercial VR units are reviewed and features compared for use in a telesensation system. As for the FRMC, the conceptual design of a 3-DOF FRMC is developed in an effort to make the system portable, compact, and lightweight. A variety of design alternatives are presented and evaluated. Finally, a GUI software package is developed to interface with several teleoperation unit components. These components include an industrial robot, electric motor, encoder, force/torque sensor, and CCD camera. The software includes features such as position scaling, force scaling, and rereferencing and is intended to provide a sound basis for the development of a multi-DOF FRMC system in the future.

  2. Evaluation of Ventilation Strategies in New Construction Multifamily Buildings

    SciTech Connect (OSTI)

    Maxwell, S.; Berger, D.; Zuluaga, M.

    2014-07-01

    In multifamily buildings, particularly in the Northeast, exhaust ventilation strategies are the norm as a means of meeting both local exhaust and whole-unit mechanical ventilation rates. The issue of where the 'fresh' air is coming from is gaining significance as air-tightness standards for enclosures become more stringent, and the 'normal leakage paths through the building envelope' disappear. CARB researchers have found that the majority of high performance, new construction, multifamily housing in the Northeast use one of four general strategies for ventilation: continuous exhaust only with no designated supply or make-up air source, continuous exhaust with ducted make-up air to apartments, continuous exhaust with supply through a make-up air device integral to the unit HVAC, and continuous exhaust with supply through a passive inlet device, such as a trickle vent. Insufficient information is available to designers on how these various systems are best applied. Product performance data are based on laboratory tests, and the assumption is that products will perform similarly in the field. Proper application involves matching expected performance at expected building pressures, but there is no guarantee that those conditions will exist consistently in the finished building. This research effort, which included several weeks of building pressure monitoring, sought to provide field validation of system performance. The performance of four substantially different strategies for providing make-up air to apartments was evaluated.

  3. Supply contracts for Italy prompt expansions, new construction plans

    SciTech Connect (OSTI)

    True, W.R.

    1998-02-23

    Italy`s natural-gas demand is growing faster than that of any other European country, according to Italian gas-transmission operator SNAM S.p.A., Milan. Gas demand in Italy, as a share of total energy demand, is likely to grow from slightly more than a quarter in 1996 to more than a third by 2010. As a result, SNAM is actively negotiating and signing new gas contracts with existing and new suppliers to ensure and diversify gas supply to the peninsula over that period. This article concludes a two-part series on gas supplies and pipeline infrastructure development for Europe`s two southern peninsulas. Part 1 set forth pipeline construction and gas-movement developments on the Iberian peninsula. For European supplies to Italy, expansions on two major cross-country pipelines will have been completed by 2001 along with a third new line in France that will tie into an existing line from The Netherlands. Additionally, early in the next decade, SNAM could be on its way to laying yet another pipeline across the Mediterranean Sea, setting again yet another deepwater pipelay record.

  4. Alcohol as a fuel for farm and construction equipment

    SciTech Connect (OSTI)

    Borman, G L; Foster, D E; Meyers, P S; Uyehara, O A

    1982-06-01

    Work in three areas dealing with the utilization of ethanol as fuel for farm and construction diesels is summarized. The first part is a review of what is known about the retrofitting of diesels for use of ethanol and the combustion problems involved. The second part is a discussion of the work that has been done under the contract on the performance of a single-cylinder, open-chamber diesel using solutions and emulsions of diesel fuel with ethanol. Data taken include performance, emissions and cylinder pressure-time for diesel fuel with zero to forty percent ethanol by volume. Analysis of the data includes calculation of heat release rates using a single zone model. The third part is a discussion of work done retrofitting a multicylinder turbocharged farm tractor diesel to use ethanol by fumigation. Three methods of ethanol introduction are discussed; spraying ethanol upstream and downstream of the compressor and prevaporization of the ethanol. Data on performance and emissions are given for the last two methods. A three zone heat release model is described and results from the model are given. A correlation of the ignition delay using prevaporized ethanol fumigation data is also given. Comparisons are made between fumigation in DI and IDI engines.

  5. Observation manipulator bell proves worth in Transmediterranean pipeline construction

    SciTech Connect (OSTI)

    Lewis, R.E.

    1981-10-26

    In constructing the trans-Mediterranean undersea pipeline between Tunisia and Sicily, Perry Oceanographics used a manned, tethered vehicle called an observation manipulator bell (OMB), which has proven itself in deepwater pipelaying operations. The OMB carries a crew of two inside a pressure hull with an internal diameter of 76 in. Its overall diameter is 102 in. and it weighs 17,500 lb. The vehicle has two 5-hp port- and starboard-mounted electric thrusters. Its vertical position can be controlled by either the bell operator using a clump-weight haul-down winch or the surface operator with the umbilical winch. The OMB is fitted with video cameras and voice communication. The vehicle has reached depths of 3000 ft within 30 min with only a 10-ft overshoot. The OMB's single and/or dual manipulator-arm systems can operate its onboard impact wrenches, cut-off saws, water jets, and cable cutters. In addition, the manipulator claws can operate valve wheels and levers, attach anodes, and connect of disconnect cables and hydraulic systems. The versatility of the OMB was demonstrated recently when the vehicle rescued a PC-1602 submarine that had become entangled at 1740 ft.

  6. Nuclear reactor construction with bottom supported reactor vessel

    DOE Patents [OSTI]

    Sharbaugh, John E.

    1987-01-01

    An improved liquid metal nuclear reactor construction has a reactor core and a generally cylindrical reactor vessel for holding a large pool of low pressure liquid metal coolant and housing the core within the pool. The reactor vessel has an open top end, a closed flat bottom end wall and a continuous cylindrical closed side wall interconnecting the top end and bottom end wall. The reactor also has a generally cylindrical concrete containment structure surrounding the reactor vessel and being formed by a cylindrical side wall spaced outwardly from the reactor vessel side wall and a flat base mat spaced below the reactor vessel bottom end wall. A central support pedestal is anchored to the containment structure base mat and extends upwardly therefrom to the reactor vessel and upwardly therefrom to the reactor core so as to support the bottom end wall of the reactor vessel and the lower end of the reactor core in spaced apart relationship above the containment structure base mat. Also, an annular reinforced support structure is disposed in the reactor vessel on the bottom end wall thereof and extends about the lower end of the core so as to support the periphery thereof. In addition, an annular support ring having a plurality of inward radially extending linear members is disposed between the containment structure base mat and the bottom end of the reactor vessel wall and is connected to and supports the reactor vessel at its bottom end on the containment structure base mat so as to allow the reactor vessel to expand radially but substantially prevent any lateral motions that might be imposed by the occurrence of a seismic event. The reactor construction also includes a bed of insulating material in sand-like granular form, preferably being high density magnesium oxide particles, disposed between the containment structure base mat and the bottom end wall of the reactor vessel and uniformly supporting the reactor vessel at its bottom end wall on the containment structure base mat so as to insulate the reactor vessel bottom end wall from the containment structure base mat and allow the reactor vessel bottom end wall to freely expand as it heats up while providing continuous support thereof. Further, a deck is supported upon the side wall of the containment structure above the top open end of the reactor vessel, and a plurality of serially connected extendible and retractable annular bellows extend between the deck and the top open end of the reactor vessel and flexibly and sealably interconnect the reactor vessel at its top end to the deck. An annular guide ring is disposed on the containment structure and extends between its side wall and the top open end of the reactor vessel for providing lateral support of the reactor vessel top open end by limiting imposition of lateral loads on the annular bellows by the occurrence of a lateral seismic event.

  7. Building America Whole-House Solutions for New Homes: Shaw Construction,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Aspen, Colorado | Department of Energy Shaw Construction, Aspen, Colorado Building America Whole-House Solutions for New Homes: Shaw Construction, Aspen, Colorado Case study of Shaw Construction who worked with Building America research partner Building Science Corporation to design affordable HERS-54 townhouses with central solar radiator space heating, PV, R-28 closed-cell spray foam under slab and R-26 in advanced framed walls, and rigid polyiso on inside of basement walls. PDF icon Shaw

  8. Construction Begins on First-of-its-Kind Advanced Clean Coal Electric

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Generating Facility | Department of Energy Construction Begins on First-of-its-Kind Advanced Clean Coal Electric Generating Facility Construction Begins on First-of-its-Kind Advanced Clean Coal Electric Generating Facility September 10, 2007 - 3:16pm Addthis ORLANDO, Fla. - Officials representing the U.S. Department of Energy (DOE), Southern Company, KBR Inc. and the Orlando Utilities Commission (OUC) today broke ground to begin construction of an advanced 285-megawatt integrated

  9. Military Construction Appropriations and Emergency Hurricane Supplemental Appropriations Act, 2005 (released in AEO2005)

    Reports and Publications (EIA)

    2005-01-01

    H.R. 4837, The Military Construction Appropriations and Emergency Hurricane Supplemental Appropriations Act, 2005, was signed into law on October 13, 2004. The Act provides for construction to support the operations of the U.S. Armed Forces and for military family housing. It also provides funds to help citizens in Florida and elsewhere in the aftermath of multiple hurricanes and other natural disasters. In addition, it authorizes construction of an Alaska Natural Gas Pipeline.

  10. Nuclear Power 2010 Program: Combined Construction and Operating License & Design Certification Demonstration Projects Lessons Learned Report

    Broader source: Energy.gov [DOE]

    The Nuclear Power 2010 (NP 2010) Construction and Operating License/Design Certification (COL/DC) Demonstration program together with the financial incentives provided by the Energy Policy Act of 2005 are the two primary reasons why a number of license applications for new nuclear construction are before the NRC today, and why the first new nuclear plants in over 30 years are under construction in the United States.

  11. Cost Consideration and a Possible Construction Timeline of the CEPC-SPPC

    Office of Scientific and Technical Information (OSTI)

    (Conference) | SciTech Connect Cost Consideration and a Possible Construction Timeline of the CEPC-SPPC Citation Details In-Document Search Title: Cost Consideration and a Possible Construction Timeline of the CEPC-SPPC This paper discusses the cost consideration and a possible construction timeline of the CEPC-SPPC study based on a preliminary conceptual design that is being carried out at the Institute of High Energy Physics (IHEP) in China. Authors: Chou, Weiren [1] + Show Author

  12. Step-by-step cost-estimation guide for residential earth-shelter construction

    SciTech Connect (OSTI)

    Not Available

    1980-01-01

    Designers and builders of earth-sheltered structures will find this guide to be a basic outline for estimating construction costs. It considers, besides the basic materials and costs of any construction project, the regional, experience, and other variables that affect underground construction costs. The guide format permits the user to tally individual estimates and derive a simple cost per square foot. Space is also provided to tally actual costs for comparison. (DCK)

  13. Buildings Energy Data Book: 1.3 Value of Construction and Research

    Buildings Energy Data Book [EERE]

    4 2003 U.S. Private Investment into Construction R&D Sector Average Construction R&D (1) 1.2 Building Technology Heavy Construction 2.0 Appliances 2.0 Special Trade Construction 0.2 Lighting 1.2 HVAC 1.5 U.S. Average of All Private R&D (2) 3.2 Fans, Blowers, & Air Cleaning Equipment 1.6 Manufacturing Average 3.1 Lumber and Wood Products 0.3 Service Industry Average 3.3 Commercial Building Operations 2.2 Note(s): Source(s): Percent of Sales Percent of Sales 1) Includes all

  14. Buildings Energy Data Book: 2.5 Residential Construction and Housing Market

    Buildings Energy Data Book [EERE]

    5 2010 Construction Method of Single-Family Homes, by Region (Thousand Units and Percent of Total Units) Region Total Northeast 49 10% 4 33% 2 18% 54 Midwest 76 16% 3 25% 2 18% 82 South 247 52% 4 33% 6 55% 258 West 101 21% 1 8% 1 9% 103 Total 473 100% 12 100% 11 100% 497 Source(s): Stick-Built Modular Panelized/Precut DOC, Manufacturing, Mining and Construction Statistics, New Residential Construction: Type of Construction Method of New Single-Family Houses Completed

  15. Trigonometric and hyperbolic functions method for constructing analytic solutions to nonlinear plane magnetohydrodynamics equilibrium equations

    SciTech Connect (OSTI)

    Moawad, S. M.

    2015-02-15

    In this paper, we present a solution method for constructing exact analytic solutions to magnetohydrodynamics (MHD) equations. The method is constructed via all the trigonometric and hyperbolic functions. The method is applied to MHD equilibria with mass flow. Applications to a solar system concerned with the properties of coronal mass ejections that affect the heliosphere are presented. Some examples of the constructed solutions which describe magnetic structures of solar eruptions are investigated. Moreover, the constructed method can be applied to a variety classes of elliptic partial differential equations which arise in plasma physics.

  16. Existing Commercial Reference Buildings Constructed In or After 1980 — Archive

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location.

  17. DOE-STD-1149-2002; Safety and Health Program for DOE Construction...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE STANDARD SAFETY AND HEALTH PROGRAM FOR DOE CONSTRUCTION ... DISTRIBUTION STATEMENT A. Approved for public release; ... Office of Nuclear Safety Policy and Standards (EH-53), ...

  18. How Construction Workers are Helping to Build the Clean Energy Economy |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Construction Workers are Helping to Build the Clean Energy Economy How Construction Workers are Helping to Build the Clean Energy Economy July 24, 2014 - 5:40pm Addthis U.S. Secretary of Energy Ernest Moniz speaks with tower construction workers Ed Zona, Al Williams and Jeff Reick (left to right) in Pittsburgh on Monday, July 21, 2014. | Photo courtesy of PNC. U.S. Secretary of Energy Ernest Moniz speaks with tower construction workers Ed Zona, Al Williams and Jeff Reick

  19. Construction completed, PPPL is set to resume world-class fusion...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Construction completed, PPPL is set to resume world-class fusion research By John ... Plasma Physics Laboratory (PPPL), world-leading fusion research resumes later this fall. ...

  20. EIS-0329: Proposed Construction, Operation, Decontamination/Decommissioning of Depleted Uranium Hexafluoride Conversion Facilities

    Broader source: Energy.gov [DOE]

    This EIS analyzes DOE's proposal to construct, operate, maintain, and decontaminate and decommission two depleted uranium hexafluoride (DUF 6) conversion facilities, at Portsmouth, Ohio, and Paducah, Kentucky.

  1. Voluntary Protection Program Onsite Review, Bechtel National Inc., Waste Treatment Plant Construction Site – November 2013

    Office of Energy Efficiency and Renewable Energy (EERE)

    Evaluation to determine whether Bechtel National Inc., Waste Treatment Plant Construction Site is performing at a level deserving DOE-VPP Star recognition.

  2. CRAD, Nuclear Facility Construction- Piping and Pipe Supports Inspection- March 29, 2012

    Broader source: Energy.gov [DOE]

    Nuclear Facility Construction - Piping and Pipe Supports Inspection Criteria, Approach and Lines of Inquiry (HSS CRAD 45-52, Rev. 0)

  3. Sandia Energy - DOE Completes Construction of State-of-the-Art...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOE Completes Construction of State-of-the-Art Wind Plant Performance Facility Home Renewable Energy Energy SWIFT Events Partnership Wind Energy News & Events DOE Completes...

  4. Construction Begins on First-of-its-Kind Advanced Clean Coal...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Construction Begins on First-of-its-Kind Advanced Clean Coal Electric Generating Facility ... Integrated Gasification (TRIGTM) technology," said David Ratcliffe, Southern ...

  5. Y-12 Construction hits one million-hour mark without a lost-time accident |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Y-12 National Security Complex Construction hits one ... Y-12 Construction hits one million-hour mark without a lost-time accident Posted: August 30, 2012 - 5:30pm The B&W Y-12 Direct-Hire Construction team has worked one million hours, covering a 633-day period, without a lost-time injury. Some 285 people including building trade crafts, non-manual staff and escorts worked without a lost-time accident during this period. The Construction team's last lost workday was in September 2010. A

  6. OAR 340-044 - Construction and Use of Waste Disposal Wells or...

    Open Energy Info (EERE)

    4 - Construction and Use of Waste Disposal Wells or Other Underground Injection Activities Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document-...

  7. IDAPA 37.03.03 - Rules and Minimum Standards for the Construction...

    Open Energy Info (EERE)

    3 - Rules and Minimum Standards for the Construction and Use of Injection Wells Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document-...

  8. Voluntary Protection Program Onsite Review, Waste Treatment Plant Construction Project- June 2010

    Broader source: Energy.gov [DOE]

    Evaluation to determine whether Waste Treatment Plant Construction Project is continuing to perform at a level deserving DOE-VPP Star recognition.

  9. CONSTRUCTED WETLAND TREATMENT SYSTEMS FOR WATER QUALITY IMPROVEMENT

    SciTech Connect (OSTI)

    Nelson, E.

    2010-07-19

    The Savannah River National Laboratory implemented a constructed wetland treatment system (CWTS) in 2000 to treat industrial discharge and stormwater from the Laboratory area. The industrial discharge volume is 3,030 m{sup 3} per day with elevated toxicity and metals (copper, zinc and mercury). The CWTS was identified as the best treatment option based on performance, capital and continuing cost, and schedule. A key factor for this natural system approach was the long-term binding capacity of heavy metals (especially copper, lead, and zinc) in the organic matter and sediments. The design required that the wetland treat the average daily discharge volume and be able to handle 83,280 m{sup 3} of stormwater runoff in a 24 hour period. The design allowed all water flow within the system to be driven entirely by gravity. The CWTS for A-01 outfall is composed of eight one-acre wetland cells connected in pairs and planted with giant bulrush to provide continuous organic matter input to the system. The retention basin was designed to hold stormwater flow and to allow controlled discharge to the wetland. The system became operational in October of 2000 and is the first wetland treatment system permitted by South Carolina DHEC for removal of metals. Because of the exceptional performance of the A-01 CWTS, the same strategy was used to improve water quality of the H-02 outfall that receives discharge and stormwater from the Tritium Area of SRS. The primary contaminants in this outfall were also copper and zinc. The design for this second system required that the wetland treat the average discharge volume of 415 m{sup 3} per day, and be able to handle 9,690 m{sup 3} of stormwater runoff in a 24 hour period. This allowed the building of a system much smaller than the A-01 CWTS. The system became operational in July 2007. Metal removal has been excellent since water flow through the treatment systems began, and performance improved with the maturation of the vegetation during the first season of growth of each system. Sediment samples after the first and third years of operation indicated that copper was being bound in the sediments very rapidly after entering the treatment system. The design of the system encourages low redox and sulfide production in the sediments. The objective is to stabilize metals, including mercury, as sulfide compounds in the sediments. Costs for maintenance and operation of the systems are minimal, consisting primarily of ensuring that the pipes are not clogged and that water is flowing through the system. The treatment cost per thousand gallons is many times less than conventional wastewater treatment facilities. Life expectancy and function of the biological system is based on the life of the engineering aspects and not the wetland ecology.

  10. Sec. Moniz to Georgia, Energy Department Scheduled to Close on Loan Guarantees to Construct New Nuclear Power Plant Reactors

    Broader source: Energy.gov [DOE]

    Project represents first new nuclear reactors to begin construction in the United States in three decades

  11. Audit of construction of protective force training facilities at the Pantex Plant

    SciTech Connect (OSTI)

    1995-05-05

    A goal of the Department of Energy project management system is to ensure that projects are necessary to fulfill mission needs and are cost effective. This requires that the Department justify each project and explore competitive alternatives. The objective of this audit was to assess the need to construct protective force training facilities at the Department`s Pantex Plant. Our audit disclosed that (1) construction of a physical training facility was not necessary to fulfill mission needs, and (2) the Department did not consider all viable alternatives to constructing a weapons tactics and training facility. These conditions occurred, in part, because a Justification for New Start was never prepared and approved for the Security Enhancements Major System Acquisition, which included these two projects. We recommended that the Manager, Albuquerque Operations Office, cancel construction of the physical training facility, make needed repairs and upgrades to the existing facilities, and reduce the cost of the Security Enhancements Major System Acquisition accordingly. Implementation of this recommendation will save about $1.7 million. We also recommended that the Manager direct Mason & Hanger to perform economic analyses of all viable alternatives to constructing a weapons tactics and training facility before proceeding with construction. Such analyses could lead to cancellation or rescoping of the proposed facility and result in savings to the Department. Albuquerque management did not agree to cancel construction of the physical training facility, but did agree to perform economic analyses of all viable alternatives to the proposed weapons tactics and training facility before proceeding with construction.

  12. Technology Solutions Case Study: Field Testing of Compartmentalization Methods for Multifamily Construction

    SciTech Connect (OSTI)

    2015-01-01

    Fire-resistance rated (or area separation) wall assemblies present a great difficulty in air sealing/compartmentalization, particularly in townhouse construction. To address this challenge, Building Science Corporation partnered with builder K. Hovnanian Homes to determine whether taping exterior sheathing details improves air sealing in townhouse and multifamily construction, and to better understand air leakage pathways.

  13. Buildings Energy Data Book: 1.3 Value of Construction and Research

    Buildings Energy Data Book [EERE]

    2 Value of New Building Construction Relative to GDP, by Year ($2010 Billion) Value of New Construction Put in Place Bldgs. Percent of Residential Commercial (1) All Bldgs. (1) GDP Total U.S. GDP 1980 5.0% 1985 5.8% 1990 4.9% 1995 4.4% 2000 5.2% 2005 6.0% 2006 5.9% 2007 5.2% 2008 4.4% 2009 3.3% 2010 2.6% Note(s): Source(s): 129.8 247.7 377.4 14,660 1) New buildings construction differs from Table 1.3.2 by excluding industrial building construction. DOC, Current Construction Reports: Value of New

  14. Specifically Designed Constructed Wetlands: A Novel Treatment Approach for Scrubber Wastewater

    SciTech Connect (OSTI)

    John H. Rodgers Jr; James W. Castle; Chris Arrington: Derek Eggert; Meg Iannacone

    2005-09-01

    A pilot-scale wetland treatment system was specifically designed and constructed at Clemson University to evaluate removal of mercury, selenium, and other constituents from flue gas desulfurization (FGD) wastewater. Specific objectives of this research were: (1) to measure performance of a pilot-scale constructed wetland treatment system in terms of decreases in targeted constituents (Hg, Se and As) in the FGD wastewater from inflow to outflow; (2) to determine how the observed performance is achieved (both reactions and rates); and (3) to measure performance in terms of decreased bioavailability of these elements (i.e. toxicity of sediments in constructed wetlands and toxicity of outflow waters from the treatment system). Performance of the pilot-scale constructed wetland treatment systems was assessed using two criteria: anticipated NPDES permit levels and toxicity evaluations using two sentinel toxicity-testing organisms (Ceriodaphnia dubia and Pimephales promelas). These systems performed efficiently with varied inflow simulations of FGD wastewaters removing As, Hg, and Se concentrations below NPDES permit levels and reducing the toxicity of simulated FGD wastewater after treatment with the constructed wetland treatment systems. Sequential extraction procedures indicated that these elements (As, Hg, and Se) were bound to residual phases within sediments of these systems, which should limit their bioavailability to aquatic biota. Sediments collected from constructed wetland treatment systems were tested to observe toxicity to Hyalella azteca or Chironomus tetans. Complete survival (100%) was observed for H. azteca in all cells of the constructed wetland treatment system and C. tentans had an average of 91% survival over the three treatment cells containing sediments. Survival and growth of H. azteca and C. tentans did not differ significantly between sediments from the constructed wetland treatment system and controls. Since the sediments of the constructed wetland treatment system are repositories for As, Hg, and Se and the bioavailability of these elements decreased after deposition, the pilot-scale constructed wetland treatment system contributed significantly to mitigation of risks to aquatic life from these elements.

  15. Winchester/Camberley Homes New Construction Test House Design, Construction, and Short-Term Testing in a Mixed-Humid Climate

    SciTech Connect (OSTI)

    Mallay, D.; Wiehagen, J.; Wood, A.

    2012-10-01

    The NAHB Research Center partnered with production builder Winchester/Camberley Homes to build a new construction test house in the mixed-humid climate zone of Silver Spring, MD in June 2011. The goal for this house was to improve energy efficiency by 30% over the Building America B10 benchmark through an optimized energy solutions package design that could be constructed on a production basis. This report outlines the features of this house, discusses the energy efficient design, and reports on short-term testing results.

  16. Hanford Double-Shell Tank Extent-of-Condition Construction Review

    SciTech Connect (OSTI)

    Venetz, Theodore J.; Johnson, Jeremy M.; Gunter, Jason R.; Barnes, Travis J.; Washenfelder, Dennis J.; Boomer, Kayle D.

    2013-11-14

    During routine visual inspections of Hanford double-shell waste tank 241-AY-102 (AY-102), anomalies were identified on the annulus floor which resulted in further evaluations. Following a formal leak assessment in October 2012, Washington River Protection Solutions, LLC (WRPS) determined that the primary tank of AY-102 was leaking. The formal leak assessment, documented in RPP-ASMT-53793,Tank 241-AY-102 Leak Assessment Report, identified first-of-a-kind construction difficulties and trial-and-error repairs as major contributing factors to tank failure. To determine if improvements in double-shell tank (DST) construction occurred after construction of tank AY-102, a detailed review and evaluation of historical construction records were performed for the first three DST tank farms constructed, which included tanks 241-AY-101, 241-AZ-101, 241-AZ-102, 241-SY-101, 241-SY-102, and 241-SY-103. The review for these six tanks involved research and review of dozens of boxes of historical project documentation. These reviews form a basis to better understand the current condition of the three oldest Hanford DST farms. They provide a basis for changes to the current tank inspection program and also provide valuable insight into future tank use decisions. If new tanks are constructed in the future, these reviews provide valuable "lessons-learned" information about expected difficulties as well as construction practices and techniques that are likely to be successful.

  17. Buildings Energy Data Book: 1.3 Value of Construction and Research

    Buildings Energy Data Book [EERE]

    7 Buildings Design and Construction Trades, by Year | | | 1980 | 1982 14.4 1990 | 1987 38.4 2000 (4) | 1992 36.3 2005 | 1997 46.6 2006 | 2002 95.4 2007 | 2007 52.4 2008 | 2009 | 2010 | Note(s): Source(s): 1) Does not include industrial building or heavy construction (e.g., dam and bridge building). In 1999, 76% of the employment shown is considered for "production." The entire U.S. construction industry employs an estimated 10 million people, including manufacturing. 2) In 2000, NAHB

  18. Jefferson Lab awards $7.3 million construction contract to Chesapeake firm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    | Jefferson Lab awards $7.3 million construction contract to Chesapeake firm This artist's rendering shows what the completed addition will look like. A print quality file of this graphic may be downloaded from JPIX. Jefferson Lab awards $7.3 million construction contract to Chesapeake firm June 15, 2004 Newport News, VA. - On June 7, the Department of Energy's Jefferson Lab awarded a $7.3 million construction project to Mid Eastern Builders, Inc. of Chesapeake, Va. The contract is to build

  19. DOE Signing Paves the Way for Funding, Construction of Innovative Clean

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Coal Plant in Florida | Department of Energy Signing Paves the Way for Funding, Construction of Innovative Clean Coal Plant in Florida DOE Signing Paves the Way for Funding, Construction of Innovative Clean Coal Plant in Florida April 3, 2007 - 12:17pm Addthis Advanced Technology System Deemed One of the Cleanest, Most Efficient in the World WASHINGTON, DC - The U.S. Secretary of Energy Samuel W. Bodman today announced the signing of a Record of Decision that clears the path for construction

  20. Construction progresses at GE's Oil & Gas Technology Center | GE Global

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research Home > Impact > Construction progressing at GE's newest research center, the Oil & Gas Technology Center in Oklahoma City Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) Construction progressing at GE's newest research center, the Oil & Gas Technology Center in Oklahoma City Construction is