Powered by Deep Web Technologies
Note: This page contains sample records for the topic "ole potential customers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Thin Film Packaging Solutions for High Efficiency OLED Lighting Products  

Science Conference Proceedings (OSTI)

The objective of the 'Thin Film Packaging Solutions for High Efficiency OLED Lighting Products' project is to demonstrate thin film packaging solutions based on SiC hermetic coatings that, when applied to glass and plastic substrates, support OLED lighting devices by providing longer life with greater efficiency at lower cost than is currently available. Phase I Objective: Demonstrate thin film encapsulated working phosphorescent OLED devices on optical glass with lifetime of 1,000 hour life, CRI greater than 75, and 15 lm/W. Phase II Objective: Demonstrate thin film encapsulated working phosphorescent OLED devices on plastic or glass composite with 25 lm/W, 5,000 hours life, and CRI greater than 80. Phase III Objective: Demonstrate 2 x 2 ft{sup 2} thin film encapsulated working phosphorescent OLED with 40 lm/W, 10,000 hour life, and CRI greater than 85. This report details the efforts of Phase III (Budget Period Three), a fourteen month collaborative effort that focused on optimization of high-efficiency phosphorescent OLED devices and thin-film encapsulation of said devices. The report further details the conclusions and recommendations of the project team that have foundation in all three budget periods for the program. During the conduct of the Thin Film Packaging Solutions for High Efficiency OLED Lighting Products program, including budget period three, the project team completed and delivered the following achievements: (1) a three-year marketing effort that characterized the near-term and longer-term OLED market, identified customer and consumer lighting needs, and suggested prototype product concepts and niche OLED applications lighting that will give rise to broader market acceptance as a source for wide area illumination and energy conservation; (2) a thin film encapsulation technology with a lifetime of nearly 15,000 hours, tested by calcium coupons, while stored at 16 C and 40% relative humidity ('RH'). This encapsulation technology was characterized as having less than 10% change in transmission during the 15,000 hour test period; (3) demonstrated thin film encapsulation of a phosphorescent OLED device with 1,500 hours of lifetime at 60 C and 80% RH; (4) demonstrated that a thin film laminate encapsulation, in addition to the direct thin film deposition process, of a polymer OLED device was another feasible packaging strategy for OLED lighting. The thin film laminate strategy was developed to mitigate defects, demonstrate roll-to-roll process capability for high volume throughput (reduce costs) and to support a potential commercial pathway that is less dependent upon integrated manufacturing since the laminate could be sold as a rolled good; (5) demonstrated that low cost 'blue' glass substrates could be coated with a siloxane barrier layer for planarization and ion-protection and used in the fabrication of a polymer OLED lighting device. This study further demonstrated that the substrate cost has potential for huge cost reductions from the white borosilicate glass substrate currently used by the OLED lighting industry; (6) delivered four-square feet of white phosphorescent OLED technology, including novel high efficiency devices with 82 CRI, greater than 50 lm/W efficiency, and more than 1,000 hours lifetime in a product concept model shelf; (7) presented and or published more than twenty internal studies (for private use), three external presentations (OLED workshop-for public use), and five technology-related external presentations (industry conferences-for public use); and (8) issued five patent applications, which are in various maturity stages at time of publication. Delivery of thin film encapsulated white phosphorescent OLED lighting technology remains a challenging technical achievement, and it seems that commercial availability of thin, bright, white OLED light that meets market requirements will continue to require research and development effort. However, there will be glass encapsulated white OLED lighting products commercialized in niche markets during the 2008 calendar year. This commercializ

None

2008-06-30T23:59:59.000Z

2

Estimating Large-Customer Demand Response Market Potential:Integrating Price and Customer Behavior  

Science Conference Proceedings (OSTI)

ABSTRACT=Demand response (DR) is increasingly recognized asan essential ingredient to well-functioning electricity markets. DRmarket potential studies can answer questions about the amount of DRavailable in a given area, from which market segments. Several recent DRmarket potential studies have been conducted, most adapting techniquesused to estimate energy-efficiency (EE) potential. In this scoping study,we: reviewed and categorized seven recent DR market potential studies;recommended a methodology for estimating DR market potential for large,non-residential utility customers that uses price elasticities to accountfor behavior and prices; compiled participation rates and elasticityvalues from six DR options offered to large customers in recent years,and demonstrated our recommended methodology with large customer marketpotential scenarios at an illustrative Northeastern utility. We recommendan elasticity approach for large-customer DR options that rely oncusto!

Goldman, Charles; Hopper, Nicole; Bharvirkar, Ranjit; Neenan,Bernie; Cappers, Peter

2007-06-01T23:59:59.000Z

3

Estimating Large-Customer Demand Response Market Potential: Integrating Price and Customer Behavior  

E-Print Network (OSTI)

participation, the number of customers enrolling in programsservice (i.e. , the number of customers who do not switch toinformation on the number of customers eligible for their

Goldman, Charles; Hopper, Nicole; Bharvirkar, Ranjit; Neenan, Bernie; Cappers, Peter

2007-01-01T23:59:59.000Z

4

OLED devices  

DOE Patents (OSTI)

An OLED device having an emission layer formed of an ambipolar phosphine oxide host material and a dopant, a hole transport layer in electrical communication with an anode, an electron transport layer in communication with a cathode, wherein the HOMO energy of the hole transport layer is substantially the same as the HOMO energy of the ambipolar host in the emission layer, and the LUMO energy of the electron transport layer is substantially the same as the LUMO energy of the ambipolar host in the emission layer.

Sapochak, Linda Susan [Arlington, VA; Burrows, Paul Edward [Kennewick, WA; Bimalchandra, Asanga [Richland, WA

2011-02-22T23:59:59.000Z

5

Estimating Large-Customer Demand Response Market Potential: Integrating Price and Customer Behavior  

E-Print Network (OSTI)

reductions in their class peak demand in response to pricesresidential customers with peak demand greater than 350 kWs) Eligible Customers (peak demand) > 1,500 kW > 2000 kW >

Goldman, Charles; Hopper, Nicole; Bharvirkar, Ranjit; Neenan, Bernie; Cappers, Peter

2007-01-01T23:59:59.000Z

6

Solid-State Lighting: OLED Basics  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting: OLED Basics on Twitter Bookmark Solid-State Lighting: OLED Basics on Google Bookmark Solid-State Lighting: OLED Basics on Delicious Rank Solid-State Lighting:...

7

A Methodology for Estimating Large-Customer Demand Response MarketPotential  

SciTech Connect

Demand response (DR) is increasingly recognized as an essential ingredient to well-functioning electricity markets. DR market potential studies can answer questions about the amount of DR available in a given area and from which market segments. Several recent DR market potential studies have been conducted, most adapting techniques used to estimate energy-efficiency (EE) potential. In this scoping study, we: reviewed and categorized seven recent DR market potential studies; recommended a methodology for estimating DR market potential for large, non-residential utility customers that uses price elasticities to account for behavior and prices; compiled participation rates and elasticity values from six DR options offered to large customers in recent years, and demonstrated our recommended methodology with large customer market potential scenarios at an illustrative Northeastern utility. We observe that EE and DR have several important differences that argue for an elasticity approach for large-customer DR options that rely on customer-initiated response to prices, rather than the engineering approaches typical of EE potential studies. Base-case estimates suggest that offering DR options to large, non-residential customers results in 1-3% reductions in their class peak demand in response to prices or incentive payments of $500/MWh. Participation rates (i.e., enrollment in voluntary DR programs or acceptance of default hourly pricing) have the greatest influence on DR impacts of all factors studied, yet are the least well understood. Elasticity refinements to reflect the impact of enabling technologies and response at high prices provide more accurate market potential estimates, particularly when arc elasticities (rather than substitution elasticities) are estimated.

Goldman, Charles; Hopper, Nicole; Bharvirkar, Ranjit; Neenan,Bernie; Cappers,Peter

2007-08-01T23:59:59.000Z

8

High Efficiency, Illumination Quality OLEDs for Lighting  

SciTech Connect

The goal of the program was to demonstrate a 45 lumen per watt white light device based upon the use of multiple emission colors through the use of solution processing. This performance level is a dramatic extension of the team's previous 15 LPW large area illumination device. The fundamental material system was based upon commercial polymer materials. The team was largely able to achieve these goals, and was able to deliver to DOE a 90 lumen illumination source that had an average performance of 34 LPW a 1000 cd/m{sup 2} with peak performances near 40LPW. The average color temperature is 3200K and the calculated CRI 85. The device operated at a brightness of approximately 1000cd/m{sup 2}. The use of multiple emission colors particularly red and blue, provided additional degrees of design flexibility in achieving white light, but also required the use of a multilayered structure to separate the different recombination zones and prevent interconversion of blue emission to red emission. The use of commercial materials had the advantage that improvements by the chemical manufacturers in charge transport efficiency, operating life and material purity could be rapidly incorporated without the expenditure of additional effort. The program was designed to take maximum advantage of the known characteristics of these material and proceeded in seven steps. (1) Identify the most promising materials, (2) assemble them into multi-layer structures to control excitation and transport within the OLED, (3) identify materials development needs that would optimize performance within multilayer structures, (4) build a prototype that demonstrates the potential entitlement of the novel multilayer OLED architecture (5) integrate all of the developments to find the single best materials set to implement the novel multilayer architecture, (6) further optimize the best materials set, (7) make a large area high illumination quality white OLED. A photo of the final deliverable is shown. In 2003, a large area, OLED based illumination source was demonstrated that could provide light with a quality, quantity, and efficiency on par with what can be achieved with traditional light sources. The demonstration source was made by tiling together 16 separate 6-inch x 6-inch blue-emitting OLEDs. The efficiency, total lumen output, and lifetime of the OLED based illumination source were the same as what would be achieved with an 80 watt incandescent bulb. The devices had an average efficacy of 15 LPW and used solution-processed OLEDs. The individual 6-inch x 6-inch devices incorporated three technology strategies developed specifically for OLED lighting -- downconversion for white light generation, scattering for outcoupling efficiency enhancement, and a scalable monolithic series architecture to enable large area devices. The downconversion approach consists of optically coupling a blue-emitting OLED to a set of luminescent layers. The layers are chosen to absorb the blue OLED emission and then luminescence with high efficiency at longer wavelengths. The composition and number of layers are chosen so that the unabsorbed blue emission and the longer wavelength re-emission combine to make white light. A downconversion approach has the advantage of allowing a wide variety of colors to be made from a limited set of blue emitters. In addition, one does not have to carefully tune the emission wavelength of the individual electro-luminescent species within the OLED device in order to achieve white light. The downconversion architecture used to develop the 15LPW large area light source consisted of a polymer-based blue-emitting OLED and three downconversion layers. Two of the layers utilized perylene based dyes from BASF AG of Germany with high quantum efficiency (>98%) and one of the layers consisted of inorganic phosphor particles (Y(Gd)AG:Ce) with a quantum efficiency of {approx}85%. By independently varying the optical density of the downconversion layers, the overall emission spectrum could be adjusted to maximize performance for lighting (e.g. blackbody temp

Joseph Shiang; James Cella; Kelly Chichak; Anil Duggal; Kevin Janora; Chris Heller; Gautam Parthasarathy; Jeffery Youmans; Joseph Shiang

2008-03-31T23:59:59.000Z

9

Estimating Demand Response Market Potential Among Large Commercial and Industrial Customers: A Scoping Study  

E-Print Network (OSTI)

participation, the number of customers enrolling in programsincrease both the number of customers willing to participateparticipation, or the number of customers enrolling in

Goldman, Charles; Hopper, Nicole; Bharvirkar, Ranjit; Neenan, Bernie; Cappers, Peter

2007-01-01T23:59:59.000Z

10

A Methodology for Estimating Large-Customer Demand Response Market Potential  

E-Print Network (OSTI)

participation, the number of customers enrolling in programsservice (i.e. , the number of customers who do not switch toinformation on the number of customers eligible for their

Goldman, Charles; Hopper, Nicole; Bharvirkar, Ranjit; Neenan, Bernie; Cappers, Peter

2008-01-01T23:59:59.000Z

11

Improving OLED technology for displays  

E-Print Network (OSTI)

Organic light emitting devices (OLEDs) are brightly emissive, efficient, have fast switching speeds, and are paper-thin in format, propelling their use as an emerging flat panel display technology. However, two primary ...

Yu, Jennifer J. (Jennifer Jong-Hwa), 1980-

2008-01-01T23:59:59.000Z

12

Estimating Demand Response Market Potential Among Large Commercial and Industrial Customers: A Scoping Study  

E-Print Network (OSTI)

residential customers with peak demand greater than 350 kWs) Eligible Customers (peak demand) Optional hourly pricingis relatively small; the peak demand of its large, non-

Goldman, Charles; Hopper, Nicole; Bharvirkar, Ranjit; Neenan, Bernie; Cappers, Peter

2007-01-01T23:59:59.000Z

13

Estimating Demand Response Market Potential Among Large Commercial and Industrial Customers: A Scoping Study  

E-Print Network (OSTI)

size (average maximum demand) 84 , business type (SIC code),HECO customers’ average maximum demands was not available.to estimate the maximum demand (kW) of each customer.

Goldman, Charles; Hopper, Nicole; Bharvirkar, Ranjit; Neenan, Bernie; Cappers, Peter

2007-01-01T23:59:59.000Z

14

A Methodology for Estimating Large-Customer Demand Response Market Potential  

E-Print Network (OSTI)

reductions in their class peak demand in response to pricesresidential customers with peak demand greater than 350 kWs) Eligible Customers (peak demand) > 1,500 kW > 2000 kW

Goldman, Charles; Hopper, Nicole; Bharvirkar, Ranjit; Neenan, Bernie; Cappers, Peter

2008-01-01T23:59:59.000Z

15

Microsoft Word - oleds0805.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

Organic Light Emitting Diodes (OLEDs) Organic Light Emitting Diodes (OLEDs) for General Illumination Update 2002 A A N N O O I I D D A A T T E E C C H H N N O O L L O O G G Y Y R R O O A A D D M M A A P P Date August, 2002 Sponsored by: Optoelectronics Industry Development Association (OIDA) Department of Energy - Office of Building Technology, State and Community Programs Edited by: Milan Stolka, Consultant Published by: 1133 Connecticut Avenue, NW #600 Washington, DC 20036 Ph: 202-785-4426 ♦ Fax: 202-785-4428 Web: http://www.OIDA.org OIDA Member Use Only  2002 OIDA Optoelectronics Industry Development Association All data contained in this report is proprietary to OIDA and may not be distributed in either original or reproduced form to anyone outside the client's internal organization within five years of the report

16

Lighting Group: Sources and Ballasts: OLED Cathodes  

NLE Websites -- All DOE Office Websites (Extended Search)

OLED Cathodes OLED Cathodes Development of New Cathodes for OLED's Objective The objective of this project is to develop improved cathodes for use in organic light emitting diodes (OLEDs). Approach A major challenge for organic light emitting diode (OLED) technology is to improve electron injection into the organic electroluminescent layer, which limits the efficiency of the device and the luminous flux per unit area. This project aims at overcoming such barriers by developing “structured cathodes” based on functional materials (nanotubes and nanoclusters) with characteristic size smaller than the optical wavelength. The incorporation of such nanostructured cathodes in OLEDs can significantly improve device efficiency by lowering operating voltage, and increase device stability and light extraction.

17

Estimating Demand Response Market Potential Among Large Commercialand Industrial Customers:A Scoping Study  

SciTech Connect

Demand response is increasingly recognized as an essentialingredient to well functioning electricity markets. This growingconsensus was formalized in the Energy Policy Act of 2005 (EPACT), whichestablished demand response as an official policy of the U.S. government,and directed states (and their electric utilities) to considerimplementing demand response, with a particular focus on "price-based"mechanisms. The resulting deliberations, along with a variety of stateand regional demand response initiatives, are raising important policyquestions: for example, How much demand response is enough? How much isavailable? From what sources? At what cost? The purpose of this scopingstudy is to examine analytical techniques and data sources to supportdemand response market assessments that can, in turn, answer the secondand third of these questions. We focus on demand response for large(>350 kW), commercial and industrial (C&I) customers, althoughmany of the concepts could equally be applied to similar programs andtariffs for small commercial and residential customers.

Goldman, Charles; Hopper, Nicole; Bharvirkar, Ranjit; Neenan,Bernie; Cappers, Peter

2007-01-01T23:59:59.000Z

18

Organic Light-Emitting Diodes (OLEDs) and Optically-Detected Magnetic Resonance (ODMR) studies on organic materials  

Science Conference Proceedings (OSTI)

Organic semiconductors have evolved rapidly over the last decades and currently are considered as the next-generation technology for many applications, such as organic light-emitting diodes (OLEDs) in flat-panel displays (FPDs) and solid state lighting (SSL), and organic solar cells (OSCs) in clean renewable energy. This dissertation focuses mainly on OLEDs. Although the commercialization of the OLED technology in FPDs is growing and appears to be just around the corner for SSL, there are still several key issues that need to be addressed: (1) the cost of OLEDs is very high, largely due to the costly current manufacturing process; (2) the efficiency of OLEDs needs to be improved. This is vital to the success of OLEDs in the FPD and SSL industries; (3) the lifetime of OLEDs, especially blue OLEDs, is the biggest technical challenge. All these issues raise the demand for new organic materials, new device structures, and continued lower-cost fabrication methods. In an attempt to address these issues, we used solution-processing methods to fabricate highly efficient small molecule OLEDs (SMOLEDs); this approach is costeffective in comparison to the more common thermal vacuum evaporation. We also successfully made efficient indium tin oxide (ITO)-free SMOLEDs to further improve the efficiency of the OLEDs. We employed the spin-dependent optically-detected magnetic resonance (ODMR) technique to study the luminescence quenching processes in OLEDs and organic materials in order to understand the intrinsic degradation mechanisms. We also fabricated polymer LEDs (PLEDs) based on a new electron-accepting blue-emitting polymer and studied the effect of molecular weight on the efficiency of PLEDs. All these studies helped us to better understand the underlying relationship between the organic semiconductor materials and the OLEDs’ performance, and will subsequently assist in further enhancing the efficiency of OLEDs. With strongly improved device performance (in addition to other OLEDs' attributes such as mechanical flexibility and potential low cost), the OLED technology is promising to successfully compete with current technologies, such as LCDs and inorganic LEDs.

Cai, Min

2011-11-30T23:59:59.000Z

19

Analysis of transverse Anderson localization in refractive index structures with customized random potential  

E-Print Network (OSTI)

We present a method to demonstrate Anderson localization in an optically induced randomized potential. By usage of computer controlled spatial light modulators, we are able to implement fully randomized nondiffracting beams of variable structural size in order to control the modulation length (photonic grain size) as well as the depth (disorder strength) of a random potential induced in a photorefractive crystal. In particular, we quantitatively analyze the localization length of light depending on these two parameters and find that they are crucial influencing factors on the propagation behavior leading to variably strong localization. Thus, we corroborate that transverse light localization in a random refractive index landscape strongly depends on the character of the potential, allowing for a flexible regulation of the localization strength by adapting the optical induction configuration.

Boguslawski, Martin; Armijo, Julien; Diebel, Falko; Rose, Patrick; Denz, Cornelia

2013-01-01T23:59:59.000Z

20

High Performance OLEDs with Air-stable Nanostructured Electrodes ...  

Building Energy Efficiency; ... Solar Thermal; Startup America; ... This barrier can also create heating that damages the OLED.

Note: This page contains sample records for the topic "ole potential customers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Power modeling of graphical user interfaces on OLED displays  

Science Conference Proceedings (OSTI)

Emerging organic light-emitting diode (OLED)-based displays obviate external lighting; and consume drastically different power when displaying different colors, due to their emissive nature. This creates a pressing need for OLED display power models ... Keywords: OLED display, graphic user interface, low power

Mian Dong; Yung-Seok Kevin Choi; Lin Zhong

2009-07-01T23:59:59.000Z

22

DSW customers  

NLE Websites -- All DOE Office Websites (Extended Search)

Customer Meetings Environmental Review-NEPA Operations & Maintenance Planning & Projects Power Marketing Rates Customer Meetings Environmental Review-NEPA Operations & Maintenance Planning & Projects Power Marketing Rates Desert Southwest Region's Customer list Use the filters above the customer list to refine your search. Click the "Clear" to reset the list. Western's full list of customers is available on the Western's Customer Web page. Customer Name Customer Type State Region Project Agua Caliente Band of Cahuilla Indians Native American Tribes CA DSW PD Aguila Irrigation District Irrigation Districts AZ DSW CAP Anaheim, City of Municipalities CA DSW BC Arizona Power Authority State Agencies AZ DSW BC Arizona Public Service Company Investor-owned Utilities AZ DSW CAP Azusa, City of Municipalities CA DSW BC Banning, City of Municipalities CA DSW BC

23

CRSP Customers  

NLE Websites -- All DOE Office Websites (Extended Search)

Colorado River Storage Project Management Center's Customer list Colorado River Storage Project Management Center's Customer list Use the filters above the customer list to refine your search. Click the "Clear" to reset the list. Western's full list of customers is available on the Western's Customer Web page. Customer Name Customer Type State Region Project Acoma Pueblo Native American Tribes NM CRSP SLIP Aggregated Energy Services Cooperatives AZ CRSP SLIP AK-Chin Indian Community Native American Tribes AZ CRSP SLIP Alamo Navajo Chapter Native American Tribes NM CRSP SLIP Albuquerque Operation-DOE Federal Agencies NM CRSP SLIP Arizona Electric Power Cooperative Cooperatives AZ CRSP/DSW SLIP/PD Aspen, City of Municipalities CO CRSP SLIP Aztec, City of Municipalities NM CRSP SLIP

24

International Customers  

Science Conference Proceedings (OSTI)

... 2. A description of the purpose (a general description of the goods/services for which the customer is paying). 3. Transfer ...

2013-07-19T23:59:59.000Z

25

Air-stable Nanomaterials for Efficient OLEDs and Solar Cells  

Air-stable Nanomaterials for Efficient OLEDs and Solar Cells . IB-2044, IB-2231 . ... U.S. DEPARTMENT OF ENERGY • OFFICE OF SCIENCE • UNIVERSITY OF CALIFORNIA.

26

A Review of OLED Research at Naval Research Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Division at Naval Research Laboratory. Her research is focused on organic light emitting diode (OLED) material and devices. She will discuss the research activities at Naval...

27

OLED Display with Single Grain Si TFT. (SG-TFT).  

E-Print Network (OSTI)

??OLED is a current based device, which emitted amount of light depends on the current supplied to the device so steady current flow is needed.… (more)

Naeimi, A.

2011-01-01T23:59:59.000Z

28

Available Technologies: High Performance OLEDs with Air-stable ...  

more balanced charge distribution ; Increased OLED device lifetime ; Capable of scale-up manufacturing--either "top-down" or "bottom-up" processing ;

29

Grammar Customization  

Science Conference Proceedings (OSTI)

This paper presents the LinGO Grammar Matrix grammar customization system, a web-based service which elicits typological descriptions of languages and outputs customized grammar fragments which are ready for sustained development into broad-coverage ... Keywords: Grammar engineering, HPSG, Syntax, Typology

Emily M. Bender; Scott Drellishak; Antske Fokkens; Laurie Poulson; Safiyyah Saleem

2010-03-01T23:59:59.000Z

30

New OLED Lighting Systems Shine Bright, Save Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Universal Display Corporation Universal Display Corporation (UDC) (Ewing, NJ), founded in 1994, provides OLED innovations and helps commercialize new generations of OLED products through technology licensing, UniversalPHOLED® materials sales, technology development, and technology transfer services. UDC is a world leader in the development of innovative OLED technology for use in flat panel displays, lighting, and organic electronics. It holds one of the largest patent portfolios in the OLED field. www.universaldisplay.com New OLED Lighting Systems Shine Bright, Save Energy Challenge Lighting consumes over 22% of the total electricity produced in the U.S. and, according to industry estimates, accounts for over $200 billion per year in electric bills worldwide. A majority of this energy consumption

31

Solution-Processable Transparent Conductive Hole Injection Electrode for OLED SSL  

SciTech Connect

An interconnected network of silver nanowires has been used as transparent anode in OLED devices. This layer was deposited by spin-coating and slot-die coating from an aqueous nanowire suspension. The sheet resistance of the film was 10ohms/sq with a transmission (including the glass substrate) of higher than 85%. The first phase of the project focused on the implementation of this nanowire layer with a hole-injection-layer (HIL) which has been developed at Plextronics and has been shown to provide good stability and efficiency in conventional OLED devices. We modified the HIL solution such that it coated reasonably well with suitable surface morphology so that actual devices can be manufactured. During the second phase we investigated the hole-injection and stability of hole-onlydevices. We determined that the use of the nanowire network as anode does not introduce an additional degradation mechanism since the observed device characteristics did not differ from those made with ITO anode. We then proceeded to make actual OLED devices with this nanowire / HIL stack and achieved device characteristics similar state-of-the-art OLED devices with a single junction. In order to gain traction with potential OLED manufacturers, we decided to contract Novaled to prepare large-area demonstrators for us. For these devices, we used an allevaporated stack, i.e. we did use Novaledâ??s HIL material instead of Plextronicsâ??. We successfully fabricated demonstrators with an area of 25cm2 with a double or triple junction stack. Minor stack optimizations were necessary to achieve efficacies and lifetime equivalent with ITO devices made with the same devices stack. Due to the reduced microcavity effect, the color of the emitted light is significantly more stable with respect to the viewing angle compared to ITO devices. This fact in conjunction with the promise of lower production cost due to the elimination of the ITO sputtering process and the direct patterning of the anode layer are the obvious advantages of this technology. The project has shown that this nanowire technology is a viable option to achieve OLED devices with good lifetime and efficiency and we are currently working with manufacturers to utilize this technology in a production setting.

None

2012-07-15T23:59:59.000Z

32

Modifying the organic/electrode interface in Organic Solar Cells (OSCs) and improving the efficiency of solution-processed phosphorescent Organic Light-Emitting Diodes (OLEDs)  

SciTech Connect

Organic semiconductors devices, such as, organic solar cells (OSCs), organic light-emitting diodes (OLEDs) and organic field-effect transistors (OFETs) have drawn increasing interest in recent decades. As organic materials are flexible, light weight, and potentially low-cost, organic semiconductor devices are considered to be an alternative to their inorganic counterparts. This dissertation will focus mainly on OSCs and OLEDs. As a clean and renewable energy source, the development of OSCs is very promising. Cells with 9.2% power conversion efficiency (PCE) were reported this year, compared to < 8% two years ago. OSCs belong to the so-called third generation solar cells and are still under development. While OLEDs are a more mature and better studied field, with commercial products already launched in the market, there are still several key issues: (1) the cost of OSCs/OLEDs is still high, largely due to the costly manufacturing processes; (2) the efficiency of OSCs/OLEDs needs to be improved; (3) the lifetime of OSCs/OLEDs is not sufficient compared to their inorganic counterparts; (4) the physics models of the behavior of the devices are not satisfactory. All these limitations invoke the demand for new organic materials, improved device architectures, low-cost fabrication methods, and better understanding of device physics. For OSCs, we attempted to improve the PCE by modifying the interlayer between active layer/metal. We found that ethylene glycol (EG) treated poly(3,4-ethylenedioxythiophene): polystyrenesulfonate (PEDOT: PSS) improves hole collection at the metal/polymer interface, furthermore it also affects the growth of the poly(3- hexylthiophene) (P3HT):phenyl-C61-butyric acid methyl ester (PCBM) blends, making the phase segregation more favorable for charge collection. We then studied organic/inorganic tandem cells. We also investigated the effect of a thin LiF layer on the hole-collection of copper phthalocyanine (CuPc)/C70-based small molecular OSCs. A thin LiF layer serves typically as the electron injection layer in OLEDs and electron collection interlayer in the OSCs. However, several reports showed that it can also assist in holeinjection in OLEDs. Here we first demonstrate that it assists hole-collection in OSCs, which is more obvious after air-plasma treatment, and explore this intriguing dual role. For OLEDs, we focus on solution processing methods to fabricate highly efficient phosphorescent OLEDs. First, we investigated OLEDs with a polymer host matrix, and enhanced charge injection by adding hole- and electron-transport materials into the system. We also applied a hole-blocking and electron-transport material to prevent luminescence quenching by the cathode. Finally, we substituted the polymer host by a small molecule, to achieve more efficient solution processed small molecular OLEDs (SMOLEDs); this approach is cost-effective in comparison to the more common vacuum thermal evaporation. All these studies help us to better understand the underlying relationship between the organic semiconductor materials and the OSCs and OLEDs’ performance and will subsequently assist in further enhancing the efficiencies of OSCs and OLEDs. With better efficiency and longer lifetime, the OSCs and OLEDs will be competitive with their inorganic counterparts.

Xiao, Teng

2012-04-27T23:59:59.000Z

33

Numerical analysis of nanostructures for enhanced light extraction from OLEDs  

E-Print Network (OSTI)

Nanostructures, like periodic arrays of scatters or low-index gratings, are used to improve the light outcoupling from organic light-emitting diodes (OLED). In order to optimize geometrical and material properties of such structures, simulations of the outcoupling process are very helpful. The finite element method is best suited for an accurate discretization of the geometry and the singular-like field profile within the structured layer and the emitting layer. However, a finite element simulation of the overall OLED stack is often beyond available computer resources. The main focus of this paper is the simulation of a single dipole source embedded into a twofold infinitely periodic OLED structure. To overcome the numerical burden we apply the Floquet transform, so that the computational domain reduces to the unit cell. The relevant outcoupling data are then gained by inverse Flouqet transforming. This step requires a careful numerical treatment as reported in this paper.

Zschiedrich, L; Burger, S; Schmidt, F; 10.1117/12.2001132

2013-01-01T23:59:59.000Z

34

High Efficancy Integrated Under-Cabinet Phosphorescent OLED  

SciTech Connect

In this two year program Universal Display Corporation (UDC) together with the University of Michigan, Teknokon, developed and delivered an energy efficient phosphorescent OLED under cabinet illumination system. Specifically the UDC team goal was in 2011 to deliver five (5) Beta level OLED under cabinet lighting fixtures each consisting of five 6-inch x 6-inch OLED lighting panels, delivering over 420 lumens, at an overall system efficacy of >60 lm/W, a CRI of >85, and a projected lifetime to 70% of initial luminance to exceed 20,000 hours. During the course of this program, the Team pursued the commercialization of these OLED based under cabinet lighting fixtures, to enable the launch of commercial OLED lighting products. The UDC team was ideally suited to develop these novel and efficient solid state lighting fixtures, having both the technical experience and commercial distribution mechanisms to leverage work performed under this contract. UDC's business strategy is to non-exclusively license its PHOLED technology to lighting manufacturers, and also supply them with our proprietary PHOLED materials. UDC is currently working with several licensees who are manufacturing OLED lighting panels using our technology. During this 2 year program, we further developed our high efficiency white Phosphorescent OLEDs from the first milestone, achieving a 80 lm/W single pixel to the final milestone, achieving an under-cabinet PHOLED lighting system that operates at 56 lm/W at 420 lumens. Each luminaire was comprised of ten 15cm x 7.5cm lighting modules mounted in outcoupling enhancement lenses and a control module. The lamps modules are connected together using either plugs or wires with plugs on each end, allowing for unlimited configurations. The lamps are driven by an OLED driver mounted in an enclosure which includes the AC plug. As a result of advancements gained under this program, the path to move OLED lighting panels from development into manufacturing has been further realized. We have found that under-cabinet lighting is an ideal first entry product opportunity to launch OLED lighting for residential applications. From the studies that we have performed, our PHOLED under-cabinet lighting system performance is very similar to many of the current commercially available LED under-cabinet luminaires. We also found that the projected cost of PHOLED luminaire should be comparable to the LED luminaire by 2015. With the additional benefits of PHOLED lighting, no glare, better uniformity and low operating temperature, it can be easily seen how the PHOLED under-cabinet luminaire could be preferred over the LED competition. Although the metrics we set for this program were extremely aggressive, the performance we achieved and reported, represents a very significant advancement in the OLED lighting industry.

Michael Hack

2001-10-31T23:59:59.000Z

35

Enhanced performance of organic light-emitting diodes (OLEDs) and OLED-based photoluminescent sensing platforms by novel microstructures and device architectures  

SciTech Connect

After a general introduction to OLEDs and OLED-based PL sensors, the transient emission mechanism of guest-host OLEDs is described both experimentally and theoretically. A monolithic and easy-to-apply process is demonstrated for fabricating multicolor microcavity OLEDs (that improve the sensor platform). The outcoupling issues of OLEDs at the substrate/air interface are addressed by using a microstructured polymer film resulting from a PS and polyethylene glycol (PEG) mixture. Based on the understanding of OLEDs and their improvement, research was done in order to realize integrated all organic-based O{sub 2} and pH sensors with improved signal intensity and sensitivity. The sensor design modification and optimization are summarized

Liu, Rui [Ames Laboratory

2012-08-01T23:59:59.000Z

36

Development of High Efficacy, Low Cost Phosphorescent Oled Lightning Luminaire  

SciTech Connect

In this two year program, UDC together with Armstrong World Industries, Professor Stephen Forrest (University of Michigan) and Professor Mark Thompson (University of Southern California) planned to develop and deliver high efficiency OLED lighting luminaires as part of an integrated ceiling illumination system that exceed the Department of Energy (DOE) 2010 performance projections. Specifically the UDC team in 2010 delivered two prototype OLED ceiling illumination systems, each consisting of four individual OLED lighting panels on glass integrated into Armstrong's novel TechZone open architecture ceiling systems, at an overall system efficacy of 51 lm/W, a CRI = 85 and a projected lifetime to 70% of initial luminance to exceed 10,000 hours. This accomplishment represents a 50% increase in luminaire efficacy and a factor of two in lifetime over that outlined in the solicitation. In addition, the team has also delivered one 15cm x 15cm lighting panel fabricated on a flexible metal foil substrate, demonstrating the possibility using OLEDs in a range of form factors. During this program, our Team has pursued the commercialization of these OLED based ceiling luminaires, with a goal to launch commercial products within the next three years. We have proven that our team is ideally suited to develop these highly novel and efficient solid state lighting luminaires, having both the technical experience and commercial strategy to leverage work performed under this contract. Our calculations show that the success of our program could lead to energy savings of more than 0.5 quads or 8 MMTC (million metric tons of carbon) per year by 2016.

Michael Hack

2010-07-09T23:59:59.000Z

37

Roll-to-Roll Solution-Processible Small-Molecule OLEDs  

SciTech Connect

The objective of this program is to develop key knowledge and make critical connections between technologies needed to enable low-cost manufacturing of OLED lighting products. In particular, the program was intended to demonstrate the feasibility of making high performance Small-Molecule OLEDs (SM-OLED) using a roll-to-roll (R2R) wet-coating technique by addressing the following technical risks (1) Whether the wet-coating technique can provide high performance OLEDs, (2) Whether SM-OLED can be made in a R2R manner, (3) What are the requirements for coating equipment, and (4) Whether R2R OLEDs can have the same performance as the lab controls. The program has been managed and executed according to the Program Management Plan (PMP) that was first developed at the beginning of the program and further revised accordingly as the program progressed. Significant progress and risk reductions have been accomplished by the end of the program. Specific achievements include: (1) Demonstrated that wet-coating can provide OLEDs with high LPW and long lifetime; (2) Demonstrated R2R OLEDs can be as efficient as batch controls (Figure 1) (3) Developed & validated basic designs for key equipment necessary for R2R SM-OLEDs; (4) Developed know-hows & specifications on materials & ink formulations critical to wetcoating; (5) Developed key R2R processes for each OLED layer (6) Identified key materials and components such as flexible barrier substrates necessary for R2R OLEDs.

Liu, Jie Jerry

2012-07-31T23:59:59.000Z

38

SNR Customer Meetings  

NLE Websites -- All DOE Office Websites (Extended Search)

Rates You are here: SN Home page > SNR Customer Meetings SNR Customer Meetings 12011 SNR Transmission Customer Meeting 9 am to 10 am Lake Natoma Inn 702 Gold Lake Drive, Folsom,...

39

CERTS customer adoption model  

SciTech Connect

This effort represents a contribution to the wider distributed energy resources (DER) research of the Consortium for Electric Reliability Technology Solutions (CERTS, http://certs.lbl.gov) that is intended to attack and, hopefully, resolve the technical barriers to DER adoption, particularly those that are unlikely to be of high priority to individual equipment vendors. The longer term goal of the Berkeley Lab effort is to guide the wider technical research towards the key technical problems by forecasting some likely patterns of DER adoption. In sharp contrast to traditional electricity utility planning, this work takes a customer-centric approach and focuses on DER adoption decision making at, what we currently think of as, the customer level. This study reports on Berkeley Lab's second year effort (completed in Federal fiscal year 2000, FY00) of a project aimed to anticipate patterns of customer adoption of distributed energy resources (DER). Marnay, et al., 2000 describes the earlier FY99 Berkeley Lab work. The results presented herein are not intended to represent definitive economic analyses of possible DER projects by any means. The paucity of data available and the importance of excluded factors, such as environmental implications, are simply too important to make such an analysis possible at this time. Rather, the work presented represents a demonstration of the current model and an indicator of the potential to conduct more relevant studies in the future.

Rubio, F. Javier; Siddiqui, Afzal S.; Marnay, Chris; Hamachi,Kristina S.

2000-03-01T23:59:59.000Z

40

MATERIALS DEGRADATION ANALYSIS AND DEVELOPMENT TO ENABLE ULTRA LOW COST, WEB-PROCESSED WHITE P-OLED FOR SSL  

SciTech Connect

Progress over Phase II of DE-FG02-07ER86293 'Materials Degradation Analysis and Development to Enable Ultra Low Cost, Web-Processed White P-OLED for SSL' was initially rapid in terms of device performance improvements. We exceeded our device luminance lifetime goals for printed flexible white OLEDs as laid out in our project proposal. Our Phase II performance target was to demonstrate >1500 hours luminance lifetime at 100 Cd/m2 from a printed flexible device. We now have R&D devices well in excess of 8000 hrs lifetime at 100 Cd/m2, tested in air. We also were able to produce devices which met the voltage target of >1500 hours below 15V operation. After completing the initial performance milestones, we went on to focus on color-related degradation issues which were cited as important to commercialization of the technology by our manufacturing partners. We also put additional focus on cathode work as the active material development that occurred over the STTR time period required an adaptation of the cathode from the original cathode formulations which were developed based on previous generation active layer materials. We were able to improve compatibility of the cathode with some of the newer generation active layer materials and improve device yield and voltage behavior. An additional objective of the initial Phase II was to further develop the underlying manufacturing technology and real-life product specifications. This is a key requirement that must be met to ensure eventual commercialization of this DOE-funded technology. The link between commercial investment for full commercialization and R&D efforts in OLED solid State Lighting is often a large one. Add-Vision's lower cost, printed OLED manufacturing approach is an attraction, but close engagement with manufacturing partners and addressing customer specifications is a very important link. Manufacturing technology encompasses development of moisture reduction encapsulation technology, improved cost performance, and reductions in operating voltage through thinner and higher uniformity active device layers. We have now installed a pilot encapsulation system at AVI for controlled, high throughput lamination encapsulation of flexible OLEDs in a novel process. Along with this, we have developed, with our materials supply partners, adhesives, barrier films and other encapsulation materials and we are showing total air product lifetimes in the 2-4 years range from a process consistent with our throughput goals of {approx}1M device per month ({approx}30,000 sq. ft. of processed OLEDs). Within the last year of the project, we have been working to introduce the manufacturing improvements made in our LEP deposition and annealing process to our commercial partners. Based on the success of this, a pilot scale-up program was begun. During this process, Add-Vision was acquired by a strategic partner, in no small part, because of the promise of future success of the technology as evidenced by our commercial partners pilot scale-up plans. Overall, the performance, manufacturing and product work in this project has been successful. Additional analysis and device work at LBL has also shown a unique adhesion change with device bias stressing which may result from active layer polymer cross-linking during bias stressing of device. It was shown that even small bias stresses, as a fraction of a full device lifetime stress period, result in measurable chemical change in the device. Further work needs to be conducted to fully understand the chemical nature of this interaction. Elucidation of this effect would enable doped OLED formulation to be engineered to suppress this effect and further extend lifetimes and reduce voltage climb.

DR. DEVIN MACKENZIE

2011-12-13T23:59:59.000Z

Note: This page contains sample records for the topic "ole potential customers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

APPA Customer Connections Conference  

Energy.gov (U.S. Department of Energy (DOE))

The Customer Connections Conference is APPA's annual meeting for utility professionals in the areas of:

42

A smart active matrix pixelated OLED display; Smart active matrix pixelated Organic Light Emitting Diode display.  

E-Print Network (OSTI)

??An OLED display has been fabricated and successfully tested with an external optical feedback circuit to demonstrate improvement in uniformity. In addition, the process of… (more)

Yu, Jennifer J. (Jennifer Jong-Hwa), 1980-

2004-01-01T23:59:59.000Z

43

Reconsidering custom memory allocation  

Science Conference Proceedings (OSTI)

Programmers hoping to achieve performance improvements often use custom memory allocators. This in-depth study examines eight applications that use custom allocators. Surprisingly, for six of these applications, a state-of-the-art general-purpose allocator ...

Emery D. Berger; Benjamin G. Zorn; Kathryn S. McKinley

2002-11-01T23:59:59.000Z

44

Electroluminescence property of organic light emitting diode (OLED)  

Science Conference Proceedings (OSTI)

Transport properties of electrons and holes were investigated not only in a anthracene-containing poly(p-phenylene-ethynylene)- alt - poly(p-phenylene-vinylene) (PPE-PPV) polymer (AnE-PVstat) light emitting diodes (OLED) but also in an ITO/Ag/polymer/Ag electron and ITO/PEDOT:PSS/polymer/Au hole only devices. Mobility of injected carriers followed the Poole-Frenkel type conduction mechanism and distinguished in the frequency range due to the difference of transit times in admittance measurement. Beginning of light output took place at the turn-on voltage (or flat band voltage)

2013-01-01T23:59:59.000Z

45

Customers in UGP  

NLE Websites -- All DOE Office Websites (Extended Search)

Upper Great Plains Region's Customer list Upper Great Plains Region's Customer list Use the filters above the customer list to refine your search. Click the "Clear" to reset the list. Western's full list of customers is available on the Western's Customer Web page. Customer Name Customer Type State Region Project Aberdeen, City of Municipalities SD UGP PS Ada, City of Municipalities MN UGP PS Adrian, City of Municipalities MN UGP PS Agralite Electric Cooperative Cooperatives MN UGP PS Akron, City of Municipalities IA UGP PS Alexandria, City of Municipalities MN UGP PS Alliant Energy Services, Inc. Investor-owned Utilities WI UGP PS Alta, City of Municipalities IA UGP PS Alton, City of Municipalities IA UGP PS American Electric Power Service Corporation Power Marketers OH UGP PS

46

Rocky Mountain Customers  

NLE Websites -- All DOE Office Websites (Extended Search)

RM Home About RM Contact RM Customers Environmental Review-NEPA Operations & Maintenance Planning & Projects Power Marketing Rates Rocky Mountain Region's Customer list Use the filters above the customer list to refine your search. Click the "Clear" to reset the list. Western's full list of customers is available on the Western's Customer Web page. Customer Name Customer Type State Region Project Arapahoe and Roosevelt National Forests Federal Agencies CO RM LAP Arkansas River Power Authority Municipalities CO RM/CRSP LAP/SLIP Burlington, City of Municipalities CO RM LAP Cheyenne Mountain Air Force Base Federal Agencies CO RM LAP Clay Center, City of Municipalities KS RM LAP Denver Water Board Municipalities CO RM LAP

47

Development of OLED panel defect detection system through improved otsu algorithm  

Science Conference Proceedings (OSTI)

OLED (Organic light-emitting) displays have been called the next generation of display devices for their unique properties: colorful images, large viewing angle, light weight and power efficiency. Complex manufacture processing makes the screen have ... Keywords: OLED panel, Otsu method, defect detection, image segmentation, subtraction operation

Jian Gao; Zhiliang Wang; Yanyun Liu; Chuanxia Jian; Xin Chen

2012-10-01T23:59:59.000Z

48

Organic Light-Emitting Devices (OLEDS) and Their Optically Detected Magnetic Resonance (ODMR)  

DOE Green Energy (OSTI)

Organic Light-Emitting Devices (OLEDs), both small molecular and polymeric have been studied extensively since the first efficient small molecule OLED was reported by Tang and VanSlyke in 1987. Burroughes' report on conjugated polymer-based OLEDs led to another track in OLED development. These developments have resulted in full color, highly efficient (up to {approx} 20% external efficiency 60 lm/W power efficiency for green emitters), and highly bright (> 140,000 Cd/m{sup 2} DC, {approx}2,000,000 Cd/m{sup 2} AC), stable (>40,000 hr at 5 mA/cm{sup 2}) devices. OLEDs are Lambertian emitters, which intrinsically eliminates the view angle problem of liquid crystal displays (LCDs). Thus OLEDs are beginning to compete with the current dominant LCDs in information display. Numerous companies are now active in this field, including large companies such as Pioneer, Toyota, Estman Kodak, Philipps, DuPont, Samsung, Sony, Toshiba, and Osram, and small companies like Cambridge Display Technology (CDT), Universal Display Corporation (UDC), and eMagin. The first small molecular display for vehicular stereos was introduced in 1998, and polymer OLED displays have begun to appear in commercial products. Although displays are the major application for OLEDs at present, they are also candidates for nest generation solid-state lighting. In this case the light source needs to be white in most cases. Organic transistors, organic solar cells, etc. are also being developed vigorously.

Gang Li

2003-12-12T23:59:59.000Z

49

JOURNAL OF DISPLAY TECHNOLOGY, VOL. 2, NO. 2, JUNE 2006 143 Maximizing Alq3 OLED Internal and External  

E-Print Network (OSTI)

bright, efficient Alq3-based [tris-(8-hydroxyquinoline) aluminum] organic light-emitting diode (OLED conversion material, lensed device, luminous intensity, organic light emitting diodes (OLED), outcoupling efficiency, quantum efficiency. I. INTRODUCTION ORGANIC light-emitting devices (OLEDs), using Alq (tris(8

Cincinnati, University of

50

Low Power, Red, Green and Blue Carbon Nanotube Enabled Vertical Organic Light Emitting Transistors for Active Matrix OLED Displays  

SciTech Connect

Organic semiconductors are potential alternatives to polycrystalline silicon as the semiconductor used in the backplane of active matrix organic light emitting diode displays. Demonstrated here is a light-emitting transistor with an organic channel, operating with low power dissipation at low voltage, and high aperture ratio, in three colors: red, green and blue. The single-wall carbon nanotube network source electrode is responsible for the high level of performance demonstrated. A major benefit enabled by this architecture is the integration of the drive transistor, storage capacitor and light emitter into a single device. Performance comparable to commercialized polycrystalline-silicon TFT driven OLEDs is demonstrated.

McCarthy, M. A. [University of Florida, Gainesville; Liu, B. [University of Florida, Gainesville; Donoghue, E. P. [University of Florida, Gainesville; Kravchenko, Ivan I [ORNL; Kim, D. Y. [University of Florida, Gainesville; So, Franky [University of Florida, Gainesville; Rinzler, A. G. [University of Florida, Gainesville

2011-01-01T23:59:59.000Z

51

Near independence of OLED operating voltage on transport layer thickness  

SciTech Connect

We report organic light emitting devices (OLEDs) with weak drive voltage dependence on the thickness of the hole transport layer (HTL) for thicknesses up to 1150 Å using the N,N?-Bis(naphthalen-1-yl)-N,N?-bis(phenyl)-benzidine (?-NPD) and N,N'-bis(3-methyl phenyl)-N,N'-diphenyl-[1,1'-biphenyl]-4,4'diamine (TPD), both of which have hole mobilities in the range of 2 × 10-3 cm2V-1s-1. Lower mobility HTL materials show larger operating voltage dependence on thickness. The near independence of the operating voltage for high mobility transport material thickness was only observed when the energy barrier for charge injection into the transport material was minimized. To ensure low injection barriers, a thin film of 2-(3-(adamantan-1-yl)propyl)-3,5,6-trifluorotetracyanoquinodimethane (F3TCNQ-Adl) was cast from solution onto the ITO surface. These results indicate that thick transport layers can be integrated into OLED stacks without the need for bulk conductivity doping.

Swensen, James S.; Wang, Liang (Frank) [Frank; Polikarpov, Evgueni; Rainbolt, James E.; Koech, Phillip K.; Cosimbescu, Lelia; Padmaperuma, Asanga B.

2013-01-01T23:59:59.000Z

52

CERTS customer adoption model  

E-Print Network (OSTI)

demand is 457 kW, and the baseload is 167 kW). Load (week)generation tends to fill a baseload role, and the customers

Rubio, F. Javier; Siddiqui, Afzal S.; Marnay, Chris; Hamachi, Kristina S.

2000-01-01T23:59:59.000Z

53

Recovery Act: Low Cost Integrated Substrate for OLED Lighting Development  

Science Conference Proceedings (OSTI)

PPG pursued the development of an integrated substrate, including the anode, external, and internal extraction layers. The objective of PPGâ??s program was to achieve cost reductions by displacing the existing expensive borosilicate or double-side polished float glass substrates and developing alternative electrodes and scalable light extraction layer technologies through focused and short-term applied research. One of the key highlights of the project was proving the feasibility of using PPGâ??s high transmission Solarphire® float glass as a substrate to consistently achieve organic lightemitting diode (OLED) devices with good performance and high yields. Under this program, four low-cost alternatives to the Indium Tin Oxide (ITO) anode were investigated using pilot-scale magnetron sputtered vacuum deposition (MSVD) and chemical vapor deposition (CVD) technologies. The anodes were evaluated by fabricating small and large phosphorescent organic lightemitting diode (PHOLED) devices at Universal Display Corporation (UDC). The device performance and life-times comparable to commercially available ITO anodes were demonstrated. A cost-benefit analysis was performed to down-select two anodes for further low-cost process development. Additionally, PPG developed and evaluated a number of scalable and compatible internal and external extraction layer concepts such as scattering layers on the outside of the glass substrate or between the transparent anode and the glass interface. In one external extraction layer (EEL) approach, sol-gel sprayed pyrolytic coatings were deposited using lab scale equipment by hand or automated spraying of sol-gel solutions on hot glass, followed by optimizing of scattering with minimal absorption. In another EEL approach, PPG tested large-area glass texturing by scratching a glass surface with an abrasive roller and acid etching. Efficacy enhancements of 1.27x were demonstrated using white PHOLED devices for 2.0mm substrates which are at par with the standard diffuser sheets used by OLED manufacturers. For an internal extraction layer (IEL), PPG tested two concepts combining nanoparticles either in a solgel coating inserted between the anode and OLED or anode and glass interface, or incorporated into the internal surface of the glass. Efficacy enhancements of 1.31x were demonstrated using white PHOLED devices for the IEL by itself and factors of 1.73x were attained for an IEL in combination of thick acrylic block as an EEL. Recent offline measurements indicate that, with further optimization, factors over 2.0x could be achieved through an IEL alone.

Scott Benton; Abhinav Bhandari

2012-09-30T23:59:59.000Z

54

Quantum Dot Light Enhancement Substrate for OLED Solid-State Lighting  

SciTech Connect

With DOE Award No. DE-EE00000628, QD Vision developed and demonstrated a cost-competitive solution for increasing the light extraction efficiency of OLEDs with efficient and stable color rendering index (CRI) for solid state lighting (SSL). Solution processable quantum dot (QD) films were integrated into OLED ITO-glass substrates to generate tunable white emission from blue emitting OLED) devices as well as outcouple light from the ITO film. This QD light-enhancement substrate (QD-LED) technology demonstrated a 60% increase in OLED forward light out-coupling, a value which increases to 76% when considering total increase in multi-directional light output. The objective for the first year was an 80% increase in light output. This project seeks to develop and demonstrate a cost-competitive solution for realizing increased extraction efficiency organic light emitting devices (OLEDs) with efficient and stable color rendering index (CRI) for SSL. Solution processible quantum dot (QD) films will be utilized to generate tunable white emission from blue emitting phosphorescent OLED (Ph-OLED) devices.

James Perkins; Matthew Stevenson; Gagan Mahan; Seth Coe-Sullivan; Peter Kazlas

2011-01-21T23:59:59.000Z

55

Design Principals for Energy-Aware User-Interfaces on OLED-based handhelds.  

E-Print Network (OSTI)

, display technologies, such as Organic Light Emitting Diodes (OLEDs) [3], are becoming available that allow., editor. Organic Light -Emitting Diode Displays: Annual D isplay Industry Report. Second edition, 2001

Ranganathan, Parthasarathy

56

Childhood Customs and Superstitions  

NLE Websites -- All DOE Office Websites (Extended Search)

Childhood Customs and Superstitions Childhood Customs and Superstitions Nature Bulletin No. 627 February 4, 1961 Forest Preserve District of Cook County Daniel Ryan, President Roberts Mann, Conservation Editor David H. Thompson, Senior Naturalist CHILDHOOD CUSTOMS AND SUPERSTITIONS In all the world there remains only one large tribe of savages which shows no signs of dying out or becoming civilized. These people have a language of their own; they practice magic; and they follow weird customs which have come down by word of mouth from the far-off past. Actually they are only part-time savages because, most of the time, these are our sons and daughters or our grandchildren who go to school, live in our homes, wash behind their ears, and seem to be civilized. The strangest thing about them is their ability to shift personalities right in front of your eyes.

57

Control of Customer Property  

NLE Websites -- All DOE Office Websites (Extended Search)

Report of Lost, Damaged, Destroyed or Stolen (RLDDS) Property, MGTP-005 EOTA Inventory Process, MGTP-006 for control of EOTA issued key(s) MGTP-003 Control of Customer...

58

Custom Renewable Energy Projects  

Energy.gov (U.S. Department of Energy (DOE))

Energy Trust of Oregon offers cash incentives and project development assistance for renewable energy projects that are 20 megawatts (MW) or less in capacity. These custom incentives are part of...

59

Understanding Electric Utility Customers  

Science Conference Proceedings (OSTI)

How customers use and value electricity has been a subject of study and debate for many decades. A better understanding of how customers use electricity could help the industry find ways to improve energy efficiency, thereby helping to reduce green house gas emissions, increase energy sustainability, and improve overall growth in the economy. In addition, our ability to encourage more efficient consumption through real-time feedback, control technology, and pricing is better and less costly than it has e...

2012-02-07T23:59:59.000Z

60

Regulation, customer protection and customer engagement  

E-Print Network (OSTI)

customers. The FPC’s successor body, the Federal Energy Regulatory Commission (FERC), continued this policy. By 1980 settlements were reached in approximately two-thirds of all electric rate cases there, and in 1986 in over 70% of gas pipeline rate cases... . Presently, no less than 90% of the rate cases at FERC are settled by the participants rather than determined by the Commission through the conventional litigation process. There have been similar developments in some other parts of the US and in Canada...

Littlechild, Stephen

Note: This page contains sample records for the topic "ole potential customers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Customer Services Handbook, 2010, Office of Administration |...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Customer Services Handbook, 2010, Office of Administration Customer Services Handbook, 2010, Office of Administration Customer Services Handbook Customer Services Handbook, 2010,...

62

Germany's Future Energy Policy - Potential Scope and Areas of...  

NLE Websites -- All DOE Office Websites (Extended Search)

Germany's Future Energy Policy - Potential Scope and Areas of Action for Rational Energy Use and Renewable Energies Speaker(s): Ole Langniss Date: June 24, 1996 - 12:00pm Location:...

63

Customer Service Plan  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Customer Service Plan Department of Energy Customer Service Plan - 2011 1 A Message from the Secretary Over the past two and a half years, the Obama Administration and the Department of Energy have worked to make the federal government more open for the American public and its own employees. Through these efforts, we have significantly expanded the amount and breadth of information available online about our programs and services. We have also transformed the way we communicate with the public by relaunching Energy.gov, making it an interactive, streamlined information platform. In April, President Obama directed federal agencies to take this ongoing effort one step further and establish Customer Service Plans, improving the public's interactions with the

64

NASA Customer Satisfaction Survey  

NLE Websites -- All DOE Office Websites (Extended Search)

Customer Satisfaction Survey Customer Satisfaction Survey NASA's Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC) would like to encourage you to participate in the NASA ESDIS 2013 American Customer Satisfaction Survey. The ORNL DAAC is one of twelve data centers sponsored by NASA's Earth Science Data and Information System (ESDIS) project. The ESDIS project uses the results of this survey to evaluate our success and to determine where improvements are needed. Invitations will be sent to you, our users, from CFI Group [CFI Group on behalf of NASA (NASA@jangomail.com)] during the week of August 20, 2013. Each invitation will reference us as "ORNL DAAC / FLUXNET", and contain a unique secure link to this Web-based anonymous survey. We encourage you to participate!

65

Customer-Focused Deployment  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Customer-Focused Customer-Focused Deployment SAM RASHKIN Chief Architect Building Technologies Program February 29, 2012 Building America Meeting 2 | INNOVATION & INTEGRATION: Transforming the Energy Efficiency Market Buildings.Energy.gov 'Good Government' As-A-System IECC Code: Mandates technologies and practices proven reliable and cost- effective ENERGY STAR: Recognizes Builders Who Deliver Significantly Above Code Performance Builders Challenge: Recognizes Leading Builders Applying Proven Innovations and Best Practices Building America: Develops New Innovations and Best Practices 3 | INNOVATION & INTEGRATION: Transforming the Energy Efficiency Market Buildings.Energy.gov Disseminating Research Results: Building America Resource Tool 4 | INNOVATION & INTEGRATION: Transforming the Energy Efficiency Market

66

Application of Developed APCVD Transparent Conducting Oxides and Undercoat Technologies for Economical OLED Lighting  

SciTech Connect

Economics is a key factor for application of organic light emitting diodes (OLED) in general lighting relative to OLED flat panel displays that can handle high cost materials such as indium tin oxide (ITO) or Indium zinc oxide (IZO) as the transparent conducting oxide (TCO) on display glass. However, for OLED lighting to penetrate into general illumination, economics and sustainable materials are critical. The issues with ITO have been documented at the DOE SSL R&D and Manufacturing workshops for the last 5 years and the issue is being exacerbated by export controls from China (one of the major sources of elemental indium). Therefore, ITO is not sustainable because of the fluctuating costs and the United States (US) dependency on other nations such as China. Numerous alternatives to ITO/IZO are being evaluated such as Ag nanoparticles/nanowires, carbon nanotubes, graphene, and other metal oxides. Of these other metal oxides, doped zinc oxide has attracted a lot of attention over the last 10 years. The volume of zinc mined is a factor of 80,000 greater than indium and the US has significant volumes of zinc mined domestically, resulting in the ability for the US to be self-sufficient for this element that can be used in optoelectronic applications. The costs of elemental zinc is over 2 orders of magnitude less than indium, reflecting the relative abundance and availability of the elements. Arkema Inc. and an international primary glass manufacturing company, which is located in the United States, have developed doped zinc oxide technology for solar control windows. The genesis of this DOE SSL project was to determine if doped zinc oxide technology can be taken from the commodity based window market and translate the technology to OLED lighting. Thus, Arkema Inc. sought out experts, Philips Lighting, Pacific Northwest National Laboratories (PNNL) and National Renewable Research Laboratories (NREL), in OLED devices and brought them into the project. This project had a clear focus on economics and the work plan focused both on doped ZnO process and OLED device structure that would be consistent with the new TCO. The team successfully made 6 inch OLEDs with a serial construction. More process development is required to optimize commercial OLED structures. Feasibility was demonstrated on two different light extraction technologies: 1/4 lambda refractive index matching and high-low-high band pass filter. Process development was also completed on the key precursors for the TCO, which are ready for pilot-plant scale-up. Subsequently, Arkema has developed a cost of ownership model that is consistent with DOE SSL R&D Manufacturing targets as outlined in the DOE SSL R&D Manufacturing 2010 report. The overall outcome of this project was the demonstration that doped zinc oxide can be used for OLED devices without a drop-off in performance while gaining the economic and sustainable benefits of a more readily available TCO. The broad impact of this project, is the facilitation of OLED lighting market penetration into general illumination, resulting in significant energy savings, decreased greenhouse emissions, with no environmental impact issues such as mercury found in Fluorescent technology. The primary objective of this project was to develop a commercially viable process for 'Substrates' (Substrate/ undercoat/ TCO topcoat) to be used in production of OLED devices (lamps/luminaries/modules). This project focused on using Arkema's recently developed doped ZnO technology for the Fenestration industry and applying the technology to the OLED lighting industry. The secondary objective was the use of undercoat technology to improve light extraction from the OLED device. In optical fields and window applications, technology has been developed to mitigate reflection losses by selecting appropriate thicknesses and refractive indices of coatings applied either below or above the functional layer of interest. This technology has been proven and implemented in the fenestration industry for more than 15 years. Successful completion of

Martin Bluhm; James Coffey; Roman Korotkov; Craig Polsz; Alexandre Salemi; Robert Smith; Ryan Smith; Jeff Stricker; Chen Xu; Jasmine Shirazi; George Papakonstantopulous; Steve Carson; Claudia Goldman; Soren Hartmann; Frank Jessen; Bianca Krogmann; Christoph Rickers; Manfred Ruske; Holger Schwab; Dietrich Bertram

2011-01-02T23:59:59.000Z

67

Application of Developed APCVD Transparent Conducting Oxides and Undercoat Technologies for Economical OLED Lighting  

Science Conference Proceedings (OSTI)

Economics is a key factor for application of organic light emitting diodes (OLED) in general lighting relative to OLED flat panel displays that can handle high cost materials such as indium tin oxide (ITO) or Indium zinc oxide (IZO) as the transparent conducting oxide (TCO) on display glass. However, for OLED lighting to penetrate into general illumination, economics and sustainable materials are critical. The issues with ITO have been documented at the DOE SSL R&D and Manufacturing workshops for the last 5 years and the issue is being exacerbated by export controls from China (one of the major sources of elemental indium). Therefore, ITO is not sustainable because of the fluctuating costs and the United States (US) dependency on other nations such as China. Numerous alternatives to ITO/IZO are being evaluated such as Ag nanoparticles/nanowires, carbon nanotubes, graphene, and other metal oxides. Of these other metal oxides, doped zinc oxide has attracted a lot of attention over the last 10 years. The volume of zinc mined is a factor of 80,000 greater than indium and the US has significant volumes of zinc mined domestically, resulting in the ability for the US to be self-sufficient for this element that can be used in optoelectronic applications. The costs of elemental zinc is over 2 orders of magnitude less than indium, reflecting the relative abundance and availability of the elements. Arkema Inc. and an international primary glass manufacturing company, which is located in the United States, have developed doped zinc oxide technology for solar control windows. The genesis of this DOE SSL project was to determine if doped zinc oxide technology can be taken from the commodity based window market and translate the technology to OLED lighting. Thus, Arkema Inc. sought out experts, Philips Lighting, Pacific Northwest National Laboratories (PNNL) and National Renewable Research Laboratories (NREL), in OLED devices and brought them into the project. This project had a clear focus on economics and the work plan focused both on doped ZnO process and OLED device structure that would be consistent with the new TCO. The team successfully made 6 inch OLEDs with a serial construction. More process development is required to optimize commercial OLED structures. Feasibility was demonstrated on two different light extraction technologies: 1/4 lambda refractive index matching and high-low-high band pass filter. Process development was also completed on the key precursors for the TCO, which are ready for pilot-plant scale-up. Subsequently, Arkema has developed a cost of ownership model that is consistent with DOE SSL R&D Manufacturing targets as outlined in the DOE SSL R&D Manufacturing 2010 report. The overall outcome of this project was the demonstration that doped zinc oxide can be used for OLED devices without a drop-off in performance while gaining the economic and sustainable benefits of a more readily available TCO. The broad impact of this project, is the facilitation of OLED lighting market penetration into general illumination, resulting in significant energy savings, decreased greenhouse emissions, with no environmental impact issues such as mercury found in Fluorescent technology. The primary objective of this project was to develop a commercially viable process for 'Substrates' (Substrate/ undercoat/ TCO topcoat) to be used in production of OLED devices (lamps/luminaries/modules). This project focused on using Arkema's recently developed doped ZnO technology for the Fenestration industry and applying the technology to the OLED lighting industry. The secondary objective was the use of undercoat technology to improve light extraction from the OLED device. In optical fields and window applications, technology has been developed to mitigate reflection losses by selecting appropriate thicknesses and refractive indices of coatings applied either below or above the functional layer of interest. This technology has been proven and implemented in the fenestration industry for more than 15 years. Successful completion of

Martin Bluhm; James Coffey; Roman Korotkov; Craig Polsz; Alexandre Salemi; Robert Smith; Ryan Smith; Jeff Stricker; Chen Xu; Jasmine Shirazi; George Papakonstantopulous; Steve Carson; Claudia Goldman; Soren Hartmann; Frank Jessen; Bianca Krogmann; Christoph Rickers; Manfred Ruske; Holger Schwab; Dietrich Bertram

2011-01-02T23:59:59.000Z

68

National Account Customer Needs  

Science Conference Proceedings (OSTI)

A survey conducted in the mid-1990s explored the communications-based services national account customers desired to support their energy procurement and utilization needs. The new study reported here re-interviewed many participants from the original survey to identify changes in their thinking and practices in the light of their experience over the last 5 to 7 years.

2002-05-17T23:59:59.000Z

69

Distributed energy resources customer adoption modeling with combined heat and power applications  

E-Print Network (OSTI)

of Microgrid Distributed Energy Resource Potential Usingon Integration of Distributed Energy Resources: The CERTSof Customer Adoption of Distributed Energy Resources. ”

Siddiqui, Afzal S.; Firestone, Ryan M.; Ghosh, Srijay; Stadler, Michael; Edwards, Jennifer L.; Marnay, Chris

2003-01-01T23:59:59.000Z

70

Solvent-enhanced Dye Diffusion in Polymer This-Films for OLED Application F. Pschenitzka, K. Long, and J. C. Sturm  

E-Print Network (OSTI)

in polymer films for organic light-emitting diode (OLED) application is introduced. After an initial dye coumarin 47, coumarin 6 and Nile red. INTRODUCTION Polymer based organic light-emitting diodes (OLEDs) have

71

Customer Communications Architecture Development  

Science Conference Proceedings (OSTI)

This report builds on previous work to develop a tree of requirements metrics (TRM) that represents a detailed dictionary of primitive requirements for applications of the Smart Grid. The initial work was focused primarily, but not exclusively, on advanced metering infrastructure (AMI) systems. This project phase extends this work with some in-depth extraction of additional primitives obtained from the study of distributed energy resources and related subjects. Customer-sited distributed energy resources...

2011-12-20T23:59:59.000Z

72

Chameleon: Color Transformation on OLED Displays Mian Dong, and Lin Zhong  

E-Print Network (OSTI)

. However, there is a great need for tools to automatically transform GUIs for power reduction. Firstly transformation can readily adapt them for power savings on OLED-based displays. Secondly, transformation tools includes two steps. In first step, chameleon transforms the colors of a given GUI to minimize the power

Zhong, Lin

73

Power-Saving Color Transformation of Mobile Graphical User Interfaces on OLED-based Displays  

E-Print Network (OSTI)

Power-Saving Color Transformation of Mobile Graphical User Interfaces on OLED-based Displays Mian to their emissive nature. They bring a new opportunity for power saving by transforming GUI colors. In this work, we to automatically transform GUIs for power reduction. Firstly, most existing GUIs are designed for conventional LCDs

Zhong, Lin

74

Online OLED dynamic voltage scaling for video streaming applications on mobile devices  

Science Conference Proceedings (OSTI)

This work proposes an online DVS approach for OLED-based mobile video applications to reduce display power consumption. A time-efficient representative-region based DVS scheme is developed and applied in MPEG video streaming. Based on the proposed scheme, ...

Mengying Zhao, Yiran Chen, Xiang Chen, Chun Jason Xue

2013-07-01T23:59:59.000Z

75

Western Area Power Administration customer database  

SciTech Connect

This report describes a comprehensive customer database compiled by the Pacific Northwest Laboratory (PNL) to assist with analyses conducted as part of the Western Area Power Administration Energy Planning and Management Program Environmental Impact Statement (EIS). The database was used by PNL as a tool to help select a sample of Western customers for potential participation in the Organizational Impacts Analysis case studies, and was used as part of the Utility Impact Analysis to identify sources and costs of auxiliary power. Secondary information sources were used predominantly to compile one year of system related information on the Western customers (over 600) included in the database. This information was useful for its intended purposes; however, year-to-year information may not be consistent across utilities and not all information was available for each utility.

Sandahl, L.J.; Lee, A.D.; Wright, G.A.; Durfee, D.L.

1993-05-01T23:59:59.000Z

76

Spectrally narrowed leaky waveguide edge emission and transient electrluminescent dynamics of OLEDs  

SciTech Connect

In summary, there are two major research works presented in this dissertation. The first research project (Chapter 4) is spectrally narrowed edge emission from Organic Light Emitting Diodes. The second project (Chapter 5) is about transient electroluminescent dynamics in OLEDs. Chapter 1 is a general introduction of OLEDs. Chapter 2 is a general introduction of organic semiconductor lasers. Chapter 3 is a description of the thermal evaporation method for OLED fabrication. The detail of the first project was presented in Chapter 4. Extremely narrowed spectrum was observed from the edge of OLED devices. A threshold thickness exists, above which the spectrum is narrow, and below which the spectrum is broad. The FWHM of spectrum depends on the material of the organic thin films, the thickness of the organic layers, and length of the OLED device. A superlinear relationship between the output intensity of the edge emission and the length of the device was observed, which is probably due to the misalignment of the device edge and the optical fiber detector. The original motivation of this research is for organic semiconductor laser that hasn't been realized due to the extremely high photon absorption in OLED devices. Although we didn't succeed in fabricating an electrically pumped organic laser diode, we made a comprehensive research in edge emission of OLEDs which provides valuable results in understanding light distribution and propagation in OLED devices. Chapter 5 focuses on the second project. A strong spike was observed at the falling edge of a pulse, and a long tail followed. The spike was due to the recombination of correlated charge pair (CCP) created by trapped carriers in guest molecules of the recombination zone. When the bias was turned off, along with the decreasing of electric field in the device, the electric field induced quenching decreases and the recombination rate of the CCP increases which result in the spike. This research project provides a profound understanding of the EL dynamics of OLED, and the theoretical model can fit and explain the experiment data quite well. For the edge emission, we focused on the spectrum and the relative intensity of the edge emission. In the future, more research can be done on the comparison of the intensity between the total edge emission and the surface emission which will give us a sense what fraction of light was trapped in the device. Micro structures can be integrated into the OLED such as DFB and DBR, the character of edge emission should be very interesting. For the transient spike, the CCP model can give a good explanation. But in the model, the effect of the electric field change is not included, because from the start point (t=0), we assume the mobility of carriers is a constant. If we consider the details of the change of the electric field, then when turning of the bias, the decrease of the electric field results in decrease of the carrier mobility and the dissociation rate. If we can add the electric field effect into the model, the whole theory will be more convincing.

Zhengqing, Gan

2010-05-16T23:59:59.000Z

77

Application of Developed APCVD Transparent Conducting Oxides and Undercoat Technologies for Economical OLED Lighting  

Science Conference Proceedings (OSTI)

Economics is a key factor for application of organic light emitting diodes (OLED) in general lighting relative to OLED flat panel displays that can handle high cost materials such as indium tin oxide (ITO) or Indium zinc oxide (IZO) as the transparent conducting oxide (TCO) on display glass. However, for OLED lighting to penetrate into general illumination, economics and sustainable materials are critical. The issues with ITO have been documented at the DOE SSL R&D and Manufacturing workshops for the last 5 years and the issue is being exaserbated by export controls from China (one of the major sources of elemental indium). Therefore, ITO is not sustainable because of the fluctuating costs and the United States (US) dependency on other nations such as China. Numerous alternatives to ITO/IZO are being evaluated such as Ag nanoparticles/nanowires, carbon nanotubes, graphene, and other metal oxides. Of these other metal oxides, doped zinc oxide has attracted a lot of attention over the last 10 years. The volume of zinc mined is a factor of 80,000 greater than indium and the US has significant volumes of zinc mined domestically, resulting in the ability for the US to be self-sufficient for this element that can be used in optoelectonic applications. The costs of elemental zinc is over 2 orders of magnitude less than indium, reflecting the relative abundance and availablility of the elements. Arkema Inc. and an international primary glass manufacturing company, which is located in the United States, have developed doped zinc oxide technology for solar control windows. The genesis of this DOE SSL project was to determine if doped zinc oxide technology can be taken from the commodity based window market and translate the technology to OLED lighting. Thus, Arkema Inc. sought out experts, Philips Lighting, Pacific Northwest National Laboratories (PNNL) and National Renewable Research Laboratories (NREL), in OLED devices and brought them into the project. This project had a clear focus on economics and the work plan focused both on doped ZnO process and OLED device structure that would be consistent with the new TCO. The team successfully made 6 inch OLEDs with a serial construction. More process development is required to optimize commercial OLED structures. Feasibility was demonstrated on two different light extraction technologies: 1/4 lambda refractive index matching and high-low-high band pass filter. Process development was also completed on the key precursors for the TCO, which are ready for pilot-plant scale-up. Subsequently, Arkema has developed a cost of ownership model that is consistent with DOE SSL R&D Manufacturing targets as outlined in the DOE SSL R&D Manufacturing 2010 report. The overall outcome of this project was the demonstration that doped zinc oxide can be used for OLED devices without a drop-off in performance while gaining the economic and sustainable benefits of a more readily available TCO. The broad impact of this project, is the facilitation of OLED lighting market penetration into general illumination, resulting in significant energy savings, decreased greenhouse emissions, with no environmental impact issues such as mercury found in Fluorescent technology.

Gary Silverman; Bluhm, Martin; Coffey, James; Korotkov, Roman; Polsz, Craig; Salemi, Alexandre; Smith, Robert; Smith, Ryan; Stricker, Jeff; Xu,Chen; Shirazi, Jasmine; Papakonstantopulous, George; Carson, Steve Philips Lighting GmbH Goldman, Claudia; Hartmann, Sören; Jessen, Frank; Krogmann, Bianca; Rickers, Christoph; Ruske, Manfred, Schwab, Holger; Bertram, Dietrich

2011-01-02T23:59:59.000Z

78

Control of Customer Property  

NLE Websites -- All DOE Office Websites (Extended Search)

6 EOTA Key Control Process 11_0119.docx1_0119 6 EOTA Key Control Process 11_0119.docx1_0119 Page 1 of 5 EOTA - Business Process Document Title: EOTA Key Control Process Document Number: MGTP-006 Rev. 11_0119 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: MGTP-003 Control of Customer Property Notify of Changes: EOTA Employees Referenced Document(s): MGTF-012 Key Check-Out Form MGTP-006 EOTA Key Control Process 11_0119.docx1_0119 Page 2 of 5 Revision History: Rev. Description of Change 10_0823 Initial Release 11_0119 Modified process to include steps to take if an employee does not return a key. MGTP-006 EOTA Key Control Process 11_0119.docx1_0119 Page 3 of 5 I. Purpose To establish a process for control of all EOTA keys.

79

Functional Requirements for Customer Communications  

Science Conference Proceedings (OSTI)

Customer communications infrastructures could support a wide variety of useful utility operations and industry-wide applications. However, these systems will require a substantial investment, which necessitates viewing customer communications with multiple stakeholders and applications in mind. This report describes the development of requirements for customer interface applications such as revenue metering, communications gateways, and remote equipment operations that can provide the basis for powerful ...

2002-12-18T23:59:59.000Z

80

Teacher Resource Center: Customized Workshops  

NLE Websites -- All DOE Office Websites (Extended Search)

Customized Workshops Customized Workshops TRC Home TRC Fact Sheet Library Curricular Resources Science Fair Resources Bibliographies sciencelines The Best of sciencelines Archives Annotated List of URLs Catalog Teacher's Lounge Full Workshop Catalog Customized Workshops Scheduled Workshops Special Opportunities Teacher Networks Science Lab Fermilab Science Materials Samplers Order Form Science Safety Issues Tech Room Fermilab Web Resources From time to time we receive requests for information about workshops offered through the Fermilab Teacher Resource Center. We have conducted workshops for schools, districts and intermediate service agencies. We work closely with organizers to customize the workshops to their needs—the discussion and collaboration is essential. We receive many requests for

Note: This page contains sample records for the topic "ole potential customers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Solution-Procesed Small-Molecule OLED Luminaire for Interior Illumination  

Science Conference Proceedings (OSTI)

Prototype lighting panels and luminaires were fabricated using DuPont Displaysâ?? solution-processed small-molecule OLED technology. These lighting panels were based on a spatially-patterned, 3-color design, similar in concept to an OLED display panel, with materials chosen to maximize device efficacy. The majority of the processing steps take place in air (rather than high vacuum). Optimization of device architecture, processing and construction was undertaken, with a final prototype design of 50 cm{sup 2} being fabricated and tested. Performance of these panels reached 35 lm/W at illuminant-A. A unique feature of this technology is the ability to color tune the emission, and color temperatures ranging from 2700 to > 6,500K were attained in the final build. Significant attention was paid to low-cost fabrication techniques.

Parker, Ian

2012-02-29T23:59:59.000Z

82

2013 Customer Meeting Handouts  

NLE Websites -- All DOE Office Websites (Extended Search)

Tab 1 Rates and Contracts Presentations - Pages 19 - 32 are also found in Tab 1 Rates and Contracts Presentations - Pages 19 - 32 are also found in Tabs 17 and 18 below but were included as one handout at the meeting. The Rates only portion may be found on the previous page in the link labeled '2013 Customer Meeting Rates Presentation' Tab 2-1 - Repayment milestone Tab 2-2 Collbran SOR Tab 2-3 CRSP SOR Tab 2-4 Dolores SOR Tab 2-5 Rio Grande SOR Tab 2-6 Seedskadee SOR Tab 3-1 SLIPF9 Sum Table Tab 3-2 SLIPF9 Tab 3-3 SP-PTP7 Tab 3-4 SP-NW3 Tab 3-5 SP-NFT6 Tab 3-6 SP-SD3 Tab 3-7 SP-RS3 Tab 3-8 SP-EI3 Tab 3-9 SP-FR3 Tab 3-10 SP-SSR3 Tab 4 SLIP PRS Executive Summary Tab 5 SLIP PRS Backup Study Tab 6 - Revenue Requirements Comparison Table Tab 7-1 Average O&M Comparison Tab 7-2 O&M Budget Projections Tab 8-1 Purchase Power Comparison - 2013

83

Focusing on Profitable Wholesale Customers: Summary Sheet  

Science Conference Proceedings (OSTI)

EPRI has launched research into profitable business strategies for energy wholesalers to gain insight into the markets where they operate and provide guidance on pursuing potential new business strategies. EPRI Product 1000282, "Profitable Business Strategies for Energy Wholesalers: Guidebook," provides detailed analysis of that study's findings. This technology review, EPRI Product Number 1000281, provides a spreadsheet framework to begin analyzing the importance of specific retailers as customers for a...

2000-09-28T23:59:59.000Z

84

Security Implications of OPC, OLE, DCOM, and RPC in Control Systems  

SciTech Connect

OPC is a collection of software programming standards and interfaces used in the process control industry. It is intended to provide open connectivity and vendor equipment interoperability. The use of OPC technology simplifies the development of control systems that integrate components from multiple vendors and support multiple control protocols. OPC-compliant products are available from most control system vendors, and are widely used in the process control industry. OPC was originally known as OLE for Process Control; the first standards for OPC were based on underlying services in the Microsoft Windows computing environment. These underlying services (OLE [Object Linking and Embedding], DCOM [Distributed Component Object Model], and RPC [Remote Procedure Call]) have been the source of many severe security vulnerabilities. It is not feasible to automatically apply vendor patches and service packs to mitigate these vulnerabilities in a control systems environment. Control systems using the original OPC data access technology can thus inherit the vulnerabilities associated with these services. Current OPC standardization efforts are moving away from the original focus on Microsoft protocols, with a distinct trend toward web-based protocols that are independent of any particular operating system. However, the installed base of OPC equipment consists mainly of legacy implementations of the OLE for Process Control protocols.

2006-01-01T23:59:59.000Z

85

A Fuzzy Classification Model for Online Customers  

E-Print Network (OSTI)

Building and maintaining customer loyalty are important issues in electronic business. By providing customer services, sharing cost benefits with online customers, and rewarding the most valued customers, customer loyalty and customer equity can be improved. With conventional marketing programs, groups or segments of customers are typically constituted according to a small number of attributes. Although corresponding data values may be similar for two customers, they may fall into different classes and be treated differently. With the proposed fuzzy classification model, however, customers with similar behavior and qualifying attributes have similar membership functions and therefore similar customer values. The paper illustrates how webshops can be extended by a fuzzy classification model. This allows webshop administrators to improve customer equity, launch loyalty programs, automate mass customization and personalization issues, and refine marketing campaigns to maximize the real value of the customers. Povzetek: Razvit je model za dolo?anje lojalnosti internetnih kupcev. 1

Andreas Meier; Nicolas Werro

2007-01-01T23:59:59.000Z

86

Customer Service Specialist Job Number: 54844874  

E-Print Network (OSTI)

. The credit company is able to link a customer's identification number with 1 A discussion of signatures can: identification numbers for the customer, the customer's credit company, and the merchant; the amount customers' identities. ffl The credit company will not know what customers buy. Security is implemented

Heller, Barbara

87

Understanding Energy Customers' Profitability: EPRI's Customer Portfolio Management System  

Science Conference Proceedings (OSTI)

Anticipating pressure on revenues and earnings as deregulation of electricity markets proceeds, a number of utilities have taken some very high visibility initiatives to strengthen earnings and bolster revenues. As the results of such actions begin to be recognized as indeterminate at best, and as the onset of customer choice has proven that most customers will choose not to leave "their utility" company, perhaps the time has come to refocus industry attention on growing and maximizing the value of the r...

2000-09-27T23:59:59.000Z

88

Customer research, customer-driven design, and business strategy in Massively Multiplayer Online Games  

E-Print Network (OSTI)

This thesis is a part of an exploration of how the relationships between the customers of Massively Multiplayer Online Games (MMOGs) shape customer experience, and can be used to diminish customer churn and improve customer ...

Andrivet, Sébastien

2007-01-01T23:59:59.000Z

89

Value Modeling of Customer Satisfaction  

Science Conference Proceedings (OSTI)

This report discusses a topic of central importance in asset management: the development and use of value models. Value models translate corporate goals into operational measures for use in decision making, such as decisions regarding resource allocation, capital investment, and OM budgeting. In particular, this report deals with modeling the value of customer satisfaction and provides practical guidance on how to use information available in utility customer satisfaction studies to develop value models....

2007-07-23T23:59:59.000Z

90

Clean Custom Fuels Inc | Open Energy Information  

Open Energy Info (EERE)

Custom Fuels Inc Jump to: navigation, search Name Clean Custom Fuels Inc Place Brush Prairie,, Washington State Zip 98606 Sector Biofuels, Biomass Product String representation...

91

Deploying Systems Interoperability and Customer Choice within...  

NLE Websites -- All DOE Office Websites (Extended Search)

Deploying Systems Interoperability and Customer Choice within Smart Grid Title Deploying Systems Interoperability and Customer Choice within Smart Grid Publication Type Conference...

92

MCO Customer Handbook PAGE LEFT INTENTIONALLY BLANK TO OUR CUSTOMERS: Acknowledgement MCO Customer Handbook  

E-Print Network (OSTI)

We hope the Mapping Customer Operations (MCO) Customer Assistance Handbook fits your needs as a handy reference tool to obtain the best possible support from DLA. We have made every effort to ensure the information contained is accurate and current; however we appreciate any and all corrections as well as your feedback. The MCO Customer Handbook is also available at our web site www.dscr.dla.mil/rmf. From there, follow the link to “Customer Assistance Handbook.” We would like to recognize the many contributors and supporters of this handbook, each of whom played an integral role in developing and maintaining this resource. We are grateful and hope their efforts provide you the best insight into the mapping supply chain process. Thank you!

unknown authors

2006-01-01T23:59:59.000Z

93

Using PCA to predict customer churn in telecommunication dataset  

Science Conference Proceedings (OSTI)

Failure to identify potential churners affects significantly a company revenues and services that can provide. Imbalance distribution of instances between churners and non-churners and the size of customer dataset are the concerns when building a churn ... Keywords: PCA, predict potential churners, telecommunication dataset

T. Sato; B. Q. Huang; Y. Huang; M.-T. Kechadi; B. Buckley

2010-11-01T23:59:59.000Z

94

Potential  

NLE Websites -- All DOE Office Websites (Extended Search)

and and Frictional Drag on a Floating Sphere in a Flowing Plasma I. H. Hutchinson Plasma Science and Fusion Center Massachusetts Institute of Technology, Cambridge, MA, USA The interaction of an ion-collecting sphere at floating potential with a flowing colli- sionless plasma is investigated using the "Specialized Coordinate Electrostatic Particle and Thermals In Cell" particle-in-cell code SCEPTIC[1, 2]. Code calculations are given of potential and the total force exerted on the sphere by the flowing plasma. This force is of crucial importance to the problem of dusty plasmas, and the present results are the first for a collisionless plasma to take account of the full self-consistent potential. They reveal discrepancies amounting to as large as 20% with the standard analytic expressions, in parameter regimes where the analytic approximations might have been expected

95

Understanding Customer Choice Processes Using Neural Networks  

E-Print Network (OSTI)

of these dimensions, we try to find the number of relevant dimensions and the coordinates of customers and products are grouped into a small number of cat­ egories. Every customer has to buy a product from each category/options the model buys, but the customers do not, added to the number of products/options the customers buy

Kosters, Walter

96

Custom Coolers: Proposed Penalty (2013-CE-5315) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Proposed Penalty (2013-CE-5315) Proposed Penalty (2013-CE-5315) Custom Coolers: Proposed Penalty (2013-CE-5315) January 31, 2013 DOE alleged in a Notice of Proposed Civil Penalty that Custom Coolers, LLC, failed to certify walk-in cooler or freezer (WICF) components as compliant with the energy conservation standards. DOE regulations require a manufacturer (which includes importers) to submit reports certifying that its products have been tested and meet the applicable energy conservation standards. This civil penalty notice advises the company of the potential penalties and DOE's administrative process, including the company's right to a hearing. Custom Coolers: Proposed Penalty (2013-CE-5315) More Documents & Publications Custom Coolers: Order (2013-CE-5315) Imperial Manufacturing: Proposed Penalty (2013-CE-5322)

97

SunShot Initiative: Customer Acquisition  

NLE Websites -- All DOE Office Websites (Extended Search)

Customer Acquisition to someone Customer Acquisition to someone by E-mail Share SunShot Initiative: Customer Acquisition on Facebook Tweet about SunShot Initiative: Customer Acquisition on Twitter Bookmark SunShot Initiative: Customer Acquisition on Google Bookmark SunShot Initiative: Customer Acquisition on Delicious Rank SunShot Initiative: Customer Acquisition on Digg Find More places to share SunShot Initiative: Customer Acquisition on AddThis.com... Concentrating Solar Power Photovoltaics Systems Integration Balance of Systems Reducing Non-Hardware Costs Lowering Barriers Fostering Growth Customer Acquisition Photo of a woman, man, and child looking at a silver box on the outside of a home. The cost of acquiring customers and designing systems to fit their homes represents approximately 45% of all balance of systems costs in the U.S.

98

Ole Langniss  

NLE Websites -- All DOE Office Websites (Extended Search)

Engineering German Aerospace Research Establishment Institute for Technical Thermodynamics, Stuttgart, Germany This Speaker's Seminars Germany's Future Energy Policy -...

99

Ole Langniss  

NLE Websites -- All DOE Office Websites (Extended Search)

Engineering German Aerospace Research Establishment Institute for Technical Thermodynamics, Stuttgart, Germany This speaker was a visiting speaker who delivered a talk or...

100

OLES News  

Science Conference Proceedings (OSTI)

... Citations. 06/13/2011. NIST Contributions to Smart Grid Highlighted in White House Report, Event. 06/06/2011. NIST researchers ...

2013-09-23T23:59:59.000Z

Note: This page contains sample records for the topic "ole potential customers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

ACM HotMobile 2013 demo: Focus: a demo on usable & effective approach to OLED display power management  

Science Conference Proceedings (OSTI)

In this demo, we present Focus , a system for effectively and efficiently reducing the power consumption of OLED displays. The key idea of Focus is that we can save display power by dimming the portions of the applications and games that are less important ...

Tan Kiat Wee, Tadashi Okoshi, Archan Misra, Rajesh Krishna Balan

2013-11-01T23:59:59.000Z

102

VPN MANUAL Windows 7 Check to ensure OleMiss wireless is visible in the network connections.  

E-Print Network (OSTI)

VPN MANUAL ­ Windows 7 Check to ensure OleMiss wireless is visible in the network connections, click Continue. #12;VPN MANUAL ­ Windows 7 Next, you will be prompted to Launch the Cisco Agent. Click to `Run' the file. #12;VPN MANUAL ­ Windows 7 The Cisco Agent will likely take a few minutes to fully

Tchumper, Gregory S.

103

MSTC - Microsystems Science, Technology, and Components - Custom  

NLE Websites -- All DOE Office Websites (Extended Search)

Custom Microsystems Solutions Custom Microsystems Solutions Microsystems Home Custom Microsystems Solutions Microsystems R&D Services Capabilities and Technologies Facilities Trusted Microsystems General Info About Us Awards Contacts Doing Business with Us Fact Sheets MESA News Custom Microsystems Solutions ASICS Chemical/Bio Sensors Custom Discretes MEMS Compound Semiconductors The breadth and depth of expertise, capabilities and facilities allows Sandia's Microsystems Center the flexibility to provide custom microsystem-based solutions. By integrating a diverse base of technologies, design expertise, and fabrication options we are able to develop unique solutions for the challenging and wide-ranging problems of today. Application-Specific Integrated Circuits (ASICs) Digital ASIC Mixed-Signal ASIC

104

Customer churn prediction in telecommunications  

Science Conference Proceedings (OSTI)

This paper presents a new set of features for land-line customer churn prediction, including 2 six-month Henley segmentation, precise 4-month call details, line information, bill and payment information, account information, demographic profiles, service ... Keywords: Churn prediction, Decision Trees, Evolutionary Data Mining Algorithms, Imbalanced datasets, Linear Classifications, Logistic Regressions, Multilayer Perceptron Neural Networks, Naive Bayes, ROC and AUC techniques, Support Vector Machines

Bingquan Huang; Mohand Tahar Kechadi; Brian Buckley

2012-01-01T23:59:59.000Z

105

Appendices — Understanding Electric Utility Customers  

Science Conference Proceedings (OSTI)

EPRI report 1023562 provides a synthesis of the body of evidence regarding the major factors that affect how customers value and use electricity; this companion report contains five appendices to support that document. Appendix A provides additional background on price elasticity of demand as a companion to the economics of demand discussion in Section 2 of 1023562. Appendix B provides tables detailing elements of the experimental designs for the 10 pricing pilots examined in Section 3 of 1023562; Append...

2012-02-07T23:59:59.000Z

106

Emotion detection in email customer care  

Science Conference Proceedings (OSTI)

Prompt and knowledgeable responses to customers' emails are critical in maximizing customer satisfaction. Such emails often contain complaints about unfair treatment due to negligence, incompetence, rigid protocols, unfriendly systems, and unresponsive ...

Narendra Gupta; Mazin Gilbert; Giuseppe Di Fabbrizio

2010-06-01T23:59:59.000Z

107

SCE Responses to Customer Data Questions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SCE Responses to Customer Data Questions SCE Responses to Customer Data Questions 1. Who owns energy consumption data? SCE Response: Customer-specific data gathered or developed by a utility in the course of providing utility services is owned by the utility. Such data is subject to confidentiality and privacy requirements. In California, customers have the right to access their customer- specific information and can authorize third-party access to their information. 2. Who should be entitled to privacy protections relating to energy information? SCE Response: All customers receiving electric service from a utility should be entitled to privacy protections relating to their customer-specific energy information. Furthermore, utilities should not be required to enforce the compliance of customer-authorized third

108

Trustworthy Customer Services | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Trustworthy Customer Services Trustworthy Customer Services Trustworthy Customer Services January 15, 2014 8:30AM EST to January 16, 2014 4:00PM EST Registration link: CHRIS 002452/0001$400.00 Course Type: Classroom Course Location: Forrestal RM GH-043 Course Description: In this interactive course, participants learn how to improve their customer service skills to build stronger and more effective relationships with customers, and to improve their overall individual and organizational effectiveness. Participants learn how to identify customers and their needs, and learn the fundamental attributes of strong customer service skills. The course uses a series of mini case studies and individual assessments to help participants focus on the steps they need to take to provide exceptional customer service. Participants receive a set of

109

Custom Coolers: Order (2013-CE-5315)  

Energy.gov (U.S. Department of Energy (DOE))

DOE ordered Custom Coolers, LLC to pay a $8,000 civil penalty after finding Custom Coolers had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

110

Customer segmentation in the medical devices industry  

E-Print Network (OSTI)

This thesis addresses Company X's concerns about its product shipment options. The company ships over 70% of its products to its customers using the primary service provider that ensures that the product is at the customer ...

Basu, Probal

2007-01-01T23:59:59.000Z

111

Nanoparticle Superlattices for Custom-designed ...  

Wind Energy; Partners (27) Visual Patent Search; Success Stories; News; Events; Industrial Technologies Nanoparticle Superlattices for Custom-designed ...

112

Custom Engineered Microcompartments for Enzyme Efficiency ...  

Biomass and Biofuels Custom Engineered Microcompartments for Enzyme Efficiency Lawrence Berkeley National Laboratory. Contact LBL About This ...

113

Virtual Machine Services: An Opportunity for Hardware Customization  

E-Print Network (OSTI)

of transistor count, which is leading to archi- tecture heterogeneity and customization. (2) Software developers (Virtual Machine), which executes services such as profiling, compilation, scheduling, and memory for potential improvements in energy through the use of hardware heterogeneity. This paper uses systematic

McKinley, Kathryn S.

114

Modeling of customer adoption of distributed energy resources  

E-Print Network (OSTI)

Customer Adoption of Distributed Energy Resources Ozbek, A.Customer Adoption of Distributed Energy Resources Figure 39.Customer Adoption of Distributed Energy Resources REFERENCES

2001-01-01T23:59:59.000Z

115

The Impact of the Transient Response of 0rg;anic Light Emitting Diodes on the Design of Active Matrix OLED Displays  

E-Print Network (OSTI)

The Impact of the Transient Response of 0rg;anic Light Emitting Diodes on the Design of Active, Princeton, NJ, U.S.A. Abstract Much of the organic light emitting diode (OLED) characterization published

116

Fabrication and Characterization of New Hybrid Organic Light Emitting Diode (OLED): Europium-picrate-triethylene oxide Complex  

SciTech Connect

Thin-film light emitting devices based on organic materials have attracted vast interest in applications such as light emitting diode (LED) and flat-panel display. The organic material can be attached with inorganic material to enhance the performance of the light emitting device. A hybrid OLED based on a new complex of europium picrate (Eu-pic) with triethylene oxide (EO3) ligand is fabricated. The OLED is fabricated by using spin coating technique with acetone as the solvent and aluminum as the top electrode. The optical, photoluminescence (PL) and electrical properties of the sample are carried out by UV-Vis spectroscopy (Jasco V-750), luminescence spectroscopy (Perkin Elmer LS-500) and source measure unit (SMU)(Keithly), respectively.

Sarjidan, M. A. Mohd; Abu Zakaria, N. Z. A.; Abd. Majid, W. H. [Solid State Research Laboratory, Department of Physics, University of Malaya, 50603, Kuala Lumpur (Malaysia); Kusrini, Eny; Saleh, M. I. [School of Chemical Sciences, Universiti Sains Malaysia, 11800 Penang (Malaysia)

2009-07-07T23:59:59.000Z

117

Using Customers' Reported Forecasts to Predict Future Sales  

E-Print Network (OSTI)

Using Customers' Reported Forecasts to Predict Future Sales Nihat Altintas , Alan Montgomery orders using forecasts provided by their customers. Our goal is to improve the supplier's operations through a better un- derstanding of the customers's forecast behavior. Unfortunately, customer forecasts

Murphy, Robert F.

118

Ameren Illinois (Electric) - Custom, HVAC, and Motor Business...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Custom, HVAC, and Motor Business Efficiency Incentives Ameren Illinois (Electric) - Custom, HVAC, and Motor Business Efficiency Incentives Eligibility Commercial Industrial...

119

Understanding Electric Utility Customers -- Summary Report  

Science Conference Proceedings (OSTI)

How customers use and value electricity has been a subject of study and debate for many decades. A better understanding of how customers use electricity could help the industry find ways to improve energy efficiency.  In addition, our ability to encourage more efficient consumption through feedback, control technology, and dynamic pricing is better and less costly than it has ever been due to technology advancements.Despite decades of research into how customers use and value ...

2012-10-31T23:59:59.000Z

120

Electric retail market options: The customer perspective  

SciTech Connect

This report describes various options that are now available for retail electric customers, or that may become available during the next few years as the electric utility industry restructures. These options include different ways of meeting demand for energy services, different providers of service or points of contact with providers, and different pricing structures for purchased services. Purpose of this document is to examine these options from the customer`s perspective: how might being a retail electric customer in 5--10 years differ from now? Seizing opportunities to reduce cost of electric service is likely to entail working with different service providers; thus, transaction costs are involved. Some of the options considered are speculative. Some transitional options include relocation, customer-built/operated transmission lines, municipalization, self-generation, and long-term contracts with suppliers. All these may change or diminish in a restructured industry. Brokers seem likely to become more common unless restructuring takes the form of mandatory poolcos (wholesale). Some options appear robust, ie, they are likely to become more common regardless of how restructuring is accomplished: increased competition among energy carriers (gas vs electric), real-time pricing, etc. This report identified some of the qualitative differences among the various options. For customers using large amounts of electricity, different alternatives are likely to affect greatly service price, transaction costs, tailoring service to customer preferences, and risks for customer. For retail customers using small amounts of electricity, there may be little difference among the options except service price.

Hadley, S.W.; Hillsman, E.L.

1995-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "ole potential customers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Office of Headquarters Procurement Services - Employee Customer...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and timely. - MA-64 contracting personnel will set appropriate notifications within STRIPES so that applicable MA-64 customers will be notified as a procurement transaction...

122

Building a Database to Predict Customer Needs  

Science Conference Proceedings (OSTI)

... the customers who would respond to the lower prices, and determine what ... projected from current records using projective visualization (PV), a new ...

2006-06-08T23:59:59.000Z

123

Building a Better Capacitor with Custom Nanorods  

Science Conference Proceedings (OSTI)

Apr 10, 2013 ... Building a Better Capacitor with Custom Nanorods ... This can enable the capacitor to store more energy, extract that energy more quickly, and ...

124

Black Hills Power- Residential Customer Rebate Program  

Energy.gov (U.S. Department of Energy (DOE))

Black Hills Power offers cash rebates to residential customers who purchase and install energy efficient equipment in their homes. Incentives exist for water heaters, demand control units, air...

125

Does Customer Auditing Help Chinese Workers?  

E-Print Network (OSTI)

and Alberto Brause. 2007. Does monitoring improve labourDoes Customer Auditing Help Chinese Workers? Guojun He* andworkers well-being. Auditing does not affect the suppliers’

He, Goujun; Perloff, Jeffrey M.

2012-01-01T23:59:59.000Z

126

Reinventing information services to increase customer satisfaction  

Science Conference Proceedings (OSTI)

In this paper, the author presents her view of the role of an information service and proposes means of improving information customer service and satisfaction. The emphasis of the paper is on placing the primary value on the information customer rather than on the information itself. After receiving a request for information, the information service should strive for speed and accuracy of service to provide full-text sources in a language and format convenient to the customer. The author stresses that information professionals need to re-evaluate their roles to correctly assess and rectify customers` information deficiencies.

Madison, J.E.

1993-12-01T23:59:59.000Z

127

Impact of information and communications technologies on residental customer energy services  

Science Conference Proceedings (OSTI)

This study analyzes the potential impact of information and communications technologies on utility delivery of residential customer energy services. Many utilities are conducting trials which test energy-related and non-energy services using advanced communications systems.

Goldman, C.; Kempton, W.; Eide, A.; Iyer, M. [and others

1996-10-01T23:59:59.000Z

128

Estimating Large-Customer Demand Response Market Potential: Integrating Price and Customer Behavior  

E-Print Network (OSTI)

December 30. Southern California Edison (SCE), 2003. “Southern California Edison Company’s Long-Term Resource Planto Southern California Edison Company and Working Group 2

Goldman, Charles; Hopper, Nicole; Bharvirkar, Ranjit; Neenan, Bernie; Cappers, Peter

2007-01-01T23:59:59.000Z

129

Estimating Large-Customer Demand Response Market Potential: Integrating Price and Customer Behavior  

E-Print Network (OSTI)

and 2006) ISO-NE Real-Time Price Response (RTPR) ProgramResponse to Real Time Electricity Prices”, December,real-time energy market) Short-notice emergency program Price-

Goldman, Charles; Hopper, Nicole; Bharvirkar, Ranjit; Neenan, Bernie; Cappers, Peter

2007-01-01T23:59:59.000Z

130

Programmers are from Mars, customers are from Venus: a practical guide for customers on XP projects  

Science Conference Proceedings (OSTI)

Extreme Programming and other Agile methods have a dedicated customer role that acts as the interface between development teams and their clients, sponsors, and end-users. The customer is critical to agile projects, but there is little research, ... Keywords: XP, agile methods, customer, extreme programming

Angela Martin; James Noble; Robert Biddle

2006-10-01T23:59:59.000Z

131

Attention Wells Fargo and Wachovia customers  

E-Print Network (OSTI)

Attention Wells Fargo and Wachovia customers Are you a Wells Fargo or Wachovia mortgage customer Angeles, CA March , & : am to : pm You'll personally meet with a Wells Fargo representative who-inswelcomebutregistrationisrecommended. Wells Fargo Home Mortgage is a division of Wells Fargo Bank, N.A. Wells Fargo Bank, N.A. All rights

Southern California, University of

132

Custom chip/card design system  

Science Conference Proceedings (OSTI)

The Custom Chip/Card Design System (CCDS) is a set of software applications, tied together via a common data interchange, that is used for the design, analysis, and checking of custom electronic circuits. CCDS is intended to unite the separate electrical, ...

A. M. Barone; J. K. Morrell

1984-09-01T23:59:59.000Z

133

Customer data mining for lifestyle segmentation  

Science Conference Proceedings (OSTI)

A good relationship between companies and customers is a crucial factor of competitiveness. Market segmentation is a key issue for companies to develop and maintain loyal relationships with customers as well as to promote the increase of company sales. ... Keywords: Clustering, Lifestyle, Retailing, Segmentation

V. L. Miguéis; A. S. Camanho; João Falcão e Cunha

2012-08-01T23:59:59.000Z

134

PERFORMANCE-LED HR Is Customer Centricity  

E-Print Network (OSTI)

: Support Account: Sub Code: (to be completed by Fiscal Office) Date Billed: Company Name: Customer ID for tracking purposes. Maximum of 7 characters allowed Purchase order number provided by the customer-digit SL 5-digit SA Date the form is completed Reference number assigned by requesting department

Meju, Max

135

Definition: Customer Web Portal | Open Energy Information  

Open Energy Info (EERE)

Web Portal Web Portal Jump to: navigation, search Dictionary.png Customer Web Portal A web site designed to allow customers to view information related to their electricity usage, including consumption data, pricing information, billing information, and other messages and resources from the utility or third party energy services provider. The web portal may also be used to allow customers to provide information back to providers. Customer web portals may be accessed through web browsers or applications on personal computers or mobile devices such as smart phones.[1] Related Terms electricity generation References ↑ https://www.smartgrid.gov/category/technology/customer_web_portal [[C LikeLike UnlikeLike You like this.Sign Up to see what your friends like. ategory: Smart Grid Definitions|Template:BASEPAGENAME]]

136

Definition: Customer System Communications Network | Open Energy  

Open Energy Info (EERE)

System Communications Network System Communications Network Jump to: navigation, search Dictionary.png Customer System Communications Network The communications network or networks between the customers' premise and the utility, designed to provide two-way communications between customer systems and utility information systems. These networks can utilize wired or wireless connections, and can be utility-owned or provided as services by a third party.[1] Related Terms system References ↑ https://www.smartgrid.gov/category/technology/customer_system_communications_network [[C LikeLike UnlikeLike You like this.Sign Up to see what your friends like. ategory: Smart Grid Definitions|Template:BASEPAGENAME]] Retrieved from "http://en.openei.org/w/index.php?title=Definition:Customer_System_Communications_Network&oldid=480382"

137

Energy Conservation and Management for Electric Utility Industrial Customers  

E-Print Network (OSTI)

Comprehensive energy management assistance within the industrial section is currently being offered by a growing number of electric utilities as part of their efforts to - provide additonal demand side services to their industrial customers. One of the keys to these enhanced services is the availability of a unique Industrial Energy Conservation and Management (EC&M) computer model that can be used to evaluate the technical and economic benefits of installing proposed process related energy management systems within an industrial plant. Details of an EPRI sponsored pilot program are summarized and results presented on the use of the computer model to provide comprehensive EC&M system evaluations of potential energy management opportunities in HL&P's and other utility service areas. This capability is currently being offered to HL&P's industrial customers and is primarily concerned with identifying and evaluating possible process heat recovery and other energy management opportunities to show how a plant's energy related operating costs can be reduced.

McChesney, H. R.; Obee, T. N.; Mangum, G. F.

1985-05-01T23:59:59.000Z

138

The Binary Customer Satisfaction Model in Inventory and Queueing Systems  

E-Print Network (OSTI)

1) There are a number of customers who each have the samethe case when the number of customers approaches in?nity (? number of customers receiving product in each

Azadivar, Justin Sepehr

2010-01-01T23:59:59.000Z

139

Learning Feature Weights from Customer Return-Set Selections  

E-Print Network (OSTI)

This paper describes LCW, a procedure for learning customer preferences represented as feature weights by observing customers' selections from return sets. An empirical evaluation on simulated customer behavior indicated that uninformed hypotheses about customer weights lead to low ranking accuracy unless customers place some importance on almost all features or the total number of features is quite small. In contrast, LCW's estimate of the mean preferences of a customer population improved as the number of customers increased, even for larger numbers of features of widely differing importance. This improvement in the estimate of mean customer preferences led to improved prediction of individual customer's rankings, irrespective of the extent of variation among customers and whether a single or multiple retrievals were permitted. The experimental results suggest that the return set that optimizes benefit may be smaller for customer populations with little variation than for customer populations with wide variation.

L. Karl Branting

2004-01-01T23:59:59.000Z

140

The Research of Internet Shopping Customer Value Model  

Science Conference Proceedings (OSTI)

The existing empirical study of Internet shopping in literature, mostly concerned about the interaction relationship of retailer and customer, few scholars study the process of transactions between customers and other services suppliers, by assaying ... Keywords: Internet Shopping, Stakeholders, Customer Value

Xiao-bin Liu; Ming-qing Qiu

2010-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "ole potential customers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Fulfillment of Rush Customer Orders under Limited Capacity  

E-Print Network (OSTI)

Customer demand fulfillment is the business process within a company that determines how the customer demand is fulfilled. A rush order is the last minute customer order after the production plan of a company has been ...

Xiong, M.H.

142

Does Customer Auditing Help Chinese Workers?  

E-Print Network (OSTI)

F. Qin, and A. Brause, 2007, Does monitoring improve labourDoes Customer Auditing Help Chinese Workers? Guojun He* andof a Chinese supplier does not affect that the supplier’s

He, Guojun; Perloff, Jeffrey M.

2009-01-01T23:59:59.000Z

143

Nebraska Customized Job Training Advantage (Nebraska)  

Energy.gov (U.S. Department of Energy (DOE))

The Nebraska Customized Job Training Advantage is a flexible job training program with grants from $800-$4000 per qualified new job. Additional grant funding may be available for jobs created in...

144

Santee Cooper- Business Custom Rebate (South Carolina)  

Energy.gov (U.S. Department of Energy (DOE))

Santee Cooper has developed a Business Custom Rebate as part of their Reduce the Use: Business Prescriptive Rebate Program, which was designed to reduce a business's overall electricity use.

145

Custom Power Primer Version 1.0  

Science Conference Proceedings (OSTI)

Voltage sags, momentary interruptions, harmonic distortion, and voltage flicker are among the most common power quality variations affecting industrial and commercial end-users. Solving these problems will require a great deal of cooperation. This report focuses on devices that are classified as custom power solutions. For voltage sag, swell, and interruption mitigation, the following custom power controllers are examined: static series compensator (SSC) devices, static voltage regulator (SVR) devices, b...

1999-12-01T23:59:59.000Z

146

Green Energy Markets: Customer Responses to Green Energy Offers  

Science Conference Proceedings (OSTI)

With the introduction of retail competition in the electric utility industry, meeting customer needs is critical for retaining existing customers and attracting new ones. Understanding customer preferences for new products and offering products that provide value to customers is a first step toward meeting customer needs. While it is true that some retail customers will only choose electricity services at the lowest possible price, this is only one segment of the retail market! Recent EPRI research sugge...

1999-12-02T23:59:59.000Z

147

Hand-colored Wood Engraving of Custom House in Cincinnati  

Science Conference Proceedings (OSTI)

... and Measures (OWM) began providing standards of length, mass, and capacity to the custom-houses in the 1830s, the custom-house at Cincinnati ...

148

Ameren Illinois (Electric) - Custom, HVAC, and Motor Business...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Ameren Illinois (Electric) - Custom, HVAC, and Motor Business Efficiency Incentives Ameren Illinois (Electric) - Custom, HVAC, and Motor Business Efficiency Incentives < Back...

149

Office of Headquarters Procurement Services - Employee Customer Service  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Office of Headquarters Procurement Services - Employee Customer Office of Headquarters Procurement Services - Employee Customer Service Standards Office of Headquarters Procurement Services - Employee Customer Service Standards CUSTOMER FOCUS The Office of Headquarters Procurement Services (MA-64) serves a variety of customers in the performance of its acquisition and financial assistance mission. Primary among its many customers is each of the Department of Energy Headquarters program offices. MA-64 continually seeks to improve service to its customers, by prioritizing its workload through a better understanding of customer needs; providing effective assistance in the development of quality procurement request packages; improving the timeliness of procurement transactions through the establishment of mutually agreeable transaction milestone

150

Residential Customer Enrollment in Time-based Rate and Enabling...  

NLE Websites -- All DOE Office Websites (Extended Search)

Customer Enrollment in Time-based Rate and Enabling Technology Programs: Smart Grid Investment Grant Consumer Behavior Study Analysis Title Residential Customer Enrollment in...

151

A core reference ontology for the customer relationship domain  

Science Conference Proceedings (OSTI)

Customer Relationship Management (CRM) has emerged as an important strategy that companies should implement in order to build profitable and stable relationships with their customer. The domain of CRM has peculiar characteristics: a CRM strategy is largely ... Keywords: CRM, Customer relationship management, business activities, business knowledge, customer relationships, software

Diego Magro; Anna Goy

2012-01-01T23:59:59.000Z

152

Customer-Centered Careflow Modeling Based on Guidelines  

Science Conference Proceedings (OSTI)

In contemporary society, customer-centered health care, which stresses customer participation and long-term tailored care, is inevitably becoming a trend. Compared with the hospital or physician-centered healthcare process, the customer-centered healthcare ... Keywords: Careflow, Customer-centered health care, Information system, Process modeling

Biqing Huang; Peng Zhu; Cheng Wu

2012-10-01T23:59:59.000Z

153

Customized BGP Route Selection Using BGP/MPLS VPNs  

E-Print Network (OSTI)

Customized route selection mechanisms at ASBR Use Virtual Routing and Forwarding (VRF) instances to build

Bonaventure, Olivier

154

VP 100: Smart Meters Will Help Customers Avoid High Electric Bills |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Smart Meters Will Help Customers Avoid High Electric Bills Smart Meters Will Help Customers Avoid High Electric Bills VP 100: Smart Meters Will Help Customers Avoid High Electric Bills October 4, 2010 - 3:00pm Addthis An employee installs a smart meter as part of a smart grid initiative by EPB. The project is supporting 390 jobs in the Chattanooga area. | Photo courtesy of EPB An employee installs a smart meter as part of a smart grid initiative by EPB. The project is supporting 390 jobs in the Chattanooga area. | Photo courtesy of EPB Kevin Craft What are the key facts? EPB will install approximately 170,000 smart meters and 1,500 automated switches. They have the potential to provide a $300 million value to EPB and customers over a ten-year period. "Last winter I received a call from my son saying he had a $400 electric

155

VP 100: Smart Meters Will Help Customers Avoid High Electric Bills |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

VP 100: Smart Meters Will Help Customers Avoid High Electric Bills VP 100: Smart Meters Will Help Customers Avoid High Electric Bills VP 100: Smart Meters Will Help Customers Avoid High Electric Bills October 4, 2010 - 3:00pm Addthis An employee installs a smart meter as part of a smart grid initiative by EPB. The project is supporting 390 jobs in the Chattanooga area. | Photo courtesy of EPB An employee installs a smart meter as part of a smart grid initiative by EPB. The project is supporting 390 jobs in the Chattanooga area. | Photo courtesy of EPB Kevin Craft What are the key facts? EPB will install approximately 170,000 smart meters and 1,500 automated switches. They have the potential to provide a $300 million value to EPB and customers over a ten-year period. "Last winter I received a call from my son saying he had a $400 electric

156

Department of Energy Customer Service Plan | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Customer Service Plan Customer Service Plan Department of Energy Customer Service Plan The U.S. Department of Energy (DOE) strives to ensure America's security and prosperity by addressing its energy, environmental, and nuclear challenges through transformative science and technology solutions. Through this work, the Department serves a range of internal and external customers including DOE's employee and contractor workforce, students, scientists and researchers, businesses and other branches of federal, state and local government, among many others. With this diverse audience in mind, the Department of Energy's Customer Service Plan focuses on improving customers' access to user-friendly, effective information and resources. DOE_Customer_Service_Plan.pdf More Documents & Publications

157

Evaluating customer aid functions of online stores with agent-based models of customer behavior and evolution strategy  

Science Conference Proceedings (OSTI)

With competitive pressure growing in online markets, many Internet stores provide various customer aid functions such as personalized pages to help customers shop more effectively and efficiently. Evaluating such customer aid functions is usually costly ... Keywords: Agent, Customer aid function, Evolution strategies, Online store, Recommendation

Hyung Jun Ahn

2010-05-01T23:59:59.000Z

158

CUSTOMIZATION AS A BUSINESS MODEL FOR ONLINE NEWSPAPERS  

E-Print Network (OSTI)

The evolving IS literature on business models for digital products assumes that the positive feedback effect will lead to price competition and biased concentration of the market. In theory, this will require companies to either differentiate or customize their products and services. In this paper we propose an empirical investigation of customization as a lock-in business strategy for online newspapers in a homogenous and well-developed market. We explore approaches taken to customization and evaluate their impact on revenue generation of online newspapers. Our empirical tests with data from 42 online versions showed that mainly experienced, nationwide online newspapers applied customization. We determined two main customization approaches for online newspapers, customer and process oriented customization. Interestingly, only the degree of process customization was an important predictor and moderator of revenue having a significant interaction effect on the impact of the number of both customers and editorial staff on revenue. Contrary to our main hypothesis that customization should help in increasing customer lock-in through personalization or versioning, the majority of online newspapers seemed to concentrate mainly on process customization in order to serve a maximal number of different types of customers and to increase their revenue. The promising positive effects of customization strengthen our belief that customization could be an effective business model for online newspapers.

Markku Sääksjärvi; Teemu Santonen; Markku Sääksjärvi; Teemu Santonen; Markku Sääksjärvi; Teemu Santonen

2003-01-01T23:59:59.000Z

159

Table 20. Coal Imports by Customs District  

U.S. Energy Information Administration (EIA) Indexed Site

Coal Imports by Customs District Coal Imports by Customs District (short tons) U.S. Energy Information Administration | Quarterly Coal Report, April - June 2013 Table 20. Coal Imports by Customs District (short tons) U.S. Energy Information Administration | Quarterly Coal Report, April - June 2013 Year to Date Customs District April - June 2013 January - March 2013 April - June 2012 2013 2012 Percent Change Eastern Total 469,878 331,008 156,004 800,886 350,124 128.7 Baltimore, MD - - 106,118 - 154,318 - Boston, MA 373,985 154,438 - 528,423 51,185 NM Buffalo, NY 44 - - 44 - - New York City, NY 1,373 1,402 487 2,775 507 447.3 Norfolk, VA - 68,891 - 68,891 35,856 92.1 Ogdensburg, NY - 1 12 1 12 -91.7 Portland, ME 42,428 44,547 - 86,975 - - Providence, RI 52,028 61,729 49,387 113,757 108,226 5.1 St. Albans, VT 20

160

Advanced Billing and Customer Specification Requirements  

Science Conference Proceedings (OSTI)

The ability to bill and serve customers well will be key to whether an energy company ultimately succeeds in the emerging retail marketplace. This document provides the essential planning and implementation framework needed by an energy company to reconstruct its back-office to meet these objectives.

1997-09-24T23:59:59.000Z

Note: This page contains sample records for the topic "ole potential customers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Dynamic Customer Energy Systems Design Basis  

Science Conference Proceedings (OSTI)

Developing a common communications language for integrating consumer appliances as well as heating, ventilation, and air conditioning (HVAC) equipment is a precondition for massively scaling dynamic customer energy systems capable of demand response and other new functions. This report assesses the status of work on creating such a language and makes recommendations for integrating, extending and harmonizing these efforts.

2008-01-14T23:59:59.000Z

162

Customization in a UNIX Computing Environment  

Science Conference Proceedings (OSTI)

This work studies the use of customization in a campus UNIX computing environment where a large computing culture exists, but one that has many diverse interests rather than focusing on a cohesive project. We found there to be a gap between the core ...

Craig E. Wills; Kirstin Cadwell; William Marrs

1993-11-01T23:59:59.000Z

163

Customer Services Handbook, 2010, Office of Administration  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Service Handbook March 2010 Message from the Director... For all of us in the Office of Administration, our priority is to provide a safe, healthy, and energy-efficient workplace for all of our Headquarters colleagues. Equally important, we are a service organization whose core mission is to provide critical support to the Department of Energy program offices. My goals for us are to provide the highest quality of customer

164

COSS Service Bureau Advanced Billing and Customer Systems  

Science Conference Proceedings (OSTI)

This report is for energy companies whose business focus is market share. To achieve market share, these companies will need to build a "front office" that converts prospects into customers and achieves a high degree of customer satisfaction.

1998-12-28T23:59:59.000Z

165

Table 13. U.S. Coal Exports by Customs District  

Annual Energy Outlook 2012 (EIA)

Coal Exports by Customs District (short tons) U.S. Energy Information Administration | Quarterly Coal Report, April - June 2013 Table 13. U.S. Coal Exports by Customs District...

166

Inter-organizational information sharing of customer data in retail  

E-Print Network (OSTI)

As massive online retailers are putting increasing pressure on the traditional brick-and-mortar retailers, new ways to compete for customers is needed. Identifying customers' behavior and understanding their needs could ...

Tengberg, John C.F. (John Claes Fredrik)

2013-01-01T23:59:59.000Z

167

Category:Smart Grid Projects - Customer Systems | Open Energy...  

Open Energy Info (EERE)

Smart Grid Projects - Customer Systems category. Pages in category "Smart Grid Projects - Customer Systems" The following 5 pages are in this category, out of 5 total. C City of...

168

Smart Charger Technology for Customer Convenience and Grid ...  

¾Enable customer to optimize between cost and convenience ... • removes any uncertainties regarding battery life reduction because of extra cycling. ...

169

The Virtual Customer Ely Dahan and John R. Hauser  

E-Print Network (OSTI)

this communication to take place among larger numbers of customers and web-based interviewing enables the PD team conjoint applications required more parameters to be estimated than the number of profiles that customers- tion-level estimates. In a parallel camera UD we recorded the number of customers who included each

Gabrieli, John

170

Do 'enabling technologies' affect customer performance in price-responsive load programs?  

SciTech Connect

Price-responsive load (PRL) programs vary significantly in overall design, the complexity of relationships between program administrators, load aggregators, and customers, and the availability of ''enabling technologies''. Enabling technologies include such features as web-based power system and price monitoring, control and dispatch of curtailable loads, communications and information systems links to program participants, availability of interval metering data to customers in near real time, and building/facility/end-use automation and management capabilities. Two state agencies - NYSERDA in New York and the CEC in California - have been conspicuous leaders in the demonstration of demand response (DR) programs utilizing enabling technologies. In partnership with key stakeholders in these two states (e.g., grid operator, state energy agencies, and program administrators), Lawrence Berkeley National Laboratory (LBNL) and Pacific Northwest National Laboratory (PNNL) surveyed 56 customers who worked with five contractors participating in CEC or NYSERDA-sponsored DR programs. We combined market research and actual load curtailment data when available (i.e., New York) or customer load reduction targets in order to explore the relative importance of contractor's program design features, sophistication of control strategies, and reliance on enabling technologies in predicting customer's ability to deliver load reductions in DR programs targeted to large commercial/industrial customers. We found preliminary evidence that DR enabling technology has a positive effect on load curtailment potential. Many customers indicated that web-based energy information tools were useful for facilitating demand response (e.g., assessing actual performance compared to load reduction contract commitments), that multiple notification channels facilitated timely response, and that support for and use of backup generation allowed customers to achieve significant and ! predictable load curtailment s. We also found that 60-70 percent of the customers relied on manual approaches to implementing load reductions/curtailments, rather than automated load control response. The long-term sustainability of customer load curtailments would be significantly enhanced by automated load response capabilities, such as optimizing EMCS systems to respond to day-ahead energy market prices or load curtailments in response to system emergencies.

Goldman, Charles A.; Kintner-Meyer, Michael; Heffner, Grayson

2002-05-15T23:59:59.000Z

171

Do 'enabling technologies' affect customer performance in price-responsive load programs?  

SciTech Connect

Price-responsive load (PRL) programs vary significantly in overall design, the complexity of relationships between program administrators, load aggregators, and customers, and the availability of ''enabling technologies''. Enabling technologies include such features as web-based power system and price monitoring, control and dispatch of curtailable loads, communications and information systems links to program participants, availability of interval metering data to customers in near real time, and building/facility/end-use automation and management capabilities. Two state agencies - NYSERDA in New York and the CEC in California - have been conspicuous leaders in the demonstration of demand response (DR) programs utilizing enabling technologies. In partnership with key stakeholders in these two states (e.g., grid operator, state energy agencies, and program administrators), Lawrence Berkeley National Laboratory (LBNL) and Pacific Northwest National Laboratory (PNNL) surveyed 56 customers who worked with five contractors participating in CEC or NYSERDA-sponsored DR programs. We combined market research and actual load curtailment data when available (i.e., New York) or customer load reduction targets in order to explore the relative importance of contractor's program design features, sophistication of control strategies, and reliance on enabling technologies in predicting customer's ability to deliver load reductions in DR programs targeted to large commercial/industrial customers. We found preliminary evidence that DR enabling technology has a positive effect on load curtailment potential. Many customers indicated that web-based energy information tools were useful for facilitating demand response (e.g., assessing actual performance compared to load reduction contract commitments), that multiple notification channels facilitated timely response, and that support for and use of backup generation allowed customers to achieve significant and ! predictable load curtailment s. We also found that 60-70 percent of the customers relied on manual approaches to implementing load reductions/curtailments, rather than automated load control response. The long-term sustainability of customer load curtailments would be significantly enhanced by automated load response capabilities, such as optimizing EMCS systems to respond to day-ahead energy market prices or load curtailments in response to system emergencies.

Goldman, Charles A.; Kintner-Meyer, Michael; Heffner, Grayson

2002-05-15T23:59:59.000Z

172

THE ADOPTION OF ISO 14001 WITHIN THE SUPPLY CHAIN: WHEN ARE CUSTOMER PRESSURES EFFECTIVE?  

E-Print Network (OSTI)

led to increasing numbers of customers that require theirsupplier and for the Number of customers maintained by eachwe control for the Number of customers that each facility

Delmas, Magali A; Montiel, Ivan

2007-01-01T23:59:59.000Z

173

Estimated Value of Service Reliability for Electric Utility Customers in the United States  

E-Print Network (OSTI)

Commercial and Industrial Customers Number of ObservationsCommercial and Industrial Customers Number of ObservationsTable 5-1. Residential Customers Number of Cases by Region,

Sullivan, M.J.

2009-01-01T23:59:59.000Z

174

Residential Customer Response to Real-time Pricing: The Anaheim Critical Peak Pricing Experiment  

E-Print Network (OSTI)

the need for a large number customers on the CPP program inthey received. A number of customers received total rebatescustomers. There are a number of customers that received

Wolak, Frank A.

2007-01-01T23:59:59.000Z

175

Estimated Value of Service Reliability for Electric Utility Customers in the United States  

E-Print Network (OSTI)

Customers Number of Observations by Region, Company, Season,Customers Number of Observations by Region, Company, Season,1. Residential Customers Number of Cases by Region, Company,

Sullivan, M.J.

2009-01-01T23:59:59.000Z

176

The Use of eCRM to Enhance Customer Relationship: The Case of Toyota Mahanakkorn.  

E-Print Network (OSTI)

?? Many organizations are familiar with using CRM (Customer relationship management) to manage and enhance the customer relationship. Good customer relationship can bring great benefits… (more)

Puengprakiet, Pensiri

2011-01-01T23:59:59.000Z

177

SC-CH FACTS Customer Service  

NLE Websites -- All DOE Office Websites (Extended Search)

SC-CH FACTS SC-CH FACTS Customer Service Office of Communications P (630) 252-2110 F (630) 252-9473 Address 9800 South Cass Ave. Argonne, Illinois 60439 Websites Chicago Office www.ch.doe.gov Office of Science http://science.energy.gov/ U.S. Department of Energy http://energy.gov/ CH Factoids Who We Are ... Our Mission The Office of Science - Chicago Office (SC-CH) is a field office of the U.S. Department of Energy (DOE), a Cabinet-level agency with

178

Conceptual Modeling for Customized XML Schemas  

E-Print Network (OSTI)

XML was initially developed for document management, but it is becoming increasingly used for storing and exchanging all kinds of data on the Internet. In this paper, we introduce a design methodology for XML schemas that is based upon well-understood conceptual modeling methodologies. Because XML is hierarchical (tree-structured), many different XML schemas (or document structures) can be generated from the same conceptual database schema. We describe algorithms for generating customized hierarchical views from EER model, creating XML schemas from hierarchical views, generating SQL queries corresponding to the XML schemas, and creating XML instance documents from the query results. Ó 2004 Elsevier B.V. All rights reserved.

Ramez Elmasri; Qing Li; Jack Fu; Yu-chi Wu; Babak Hojabri; Swathi Ande

2002-01-01T23:59:59.000Z

179

PPL Electric Utilities - Custom Energy Efficiency Program | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PPL Electric Utilities - Custom Energy Efficiency Program PPL Electric Utilities - Custom Energy Efficiency Program PPL Electric Utilities - Custom Energy Efficiency Program < Back Eligibility Commercial Industrial Institutional Nonprofit Schools State Government Savings Category Other Maximum Rebate Custom Efficiency Rebates: 50% of incremental cost, $500,000 per customer site per year, or 2 million per parent company Technical Study: $100,000 annually Program Info Expiration Date 5/31/2013 State Pennsylvania Program Type Utility Rebate Program Rebate Amount Custom Incentive: $0.10 per projected first year kWh savings Technical study: 50% of cost '''The available budget for Large C&I (Commercial and Industrial) customers has been fully committed. New funding for energy efficiency projects will be available when Phase 2 begins on June 1, 2013. However, Phase 2 funding

180

Voices of Experience: Insights on Smart Grid Customer Engagement (July  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Voices of Experience: Insights on Smart Grid Customer Engagement Voices of Experience: Insights on Smart Grid Customer Engagement (July 2013) Voices of Experience: Insights on Smart Grid Customer Engagement (July 2013) The success of the Smart Grid will depend in part on consumers taking a more proactive role in managing their energy use. This document is the result of a nine-month effort to compile information on the successful approaches used by utilities to engage customers regarding smart grid technology deployments. Voices of Experience: Insights on Smart Grid Customer Engagement provides practical advice from utilities that have implemented smart grid projects to educate and engage their customers. Customer engagement within the electric power industry is an evolving, ongoing process that is just beginning to emerge. While this guide may lean

Note: This page contains sample records for the topic "ole potential customers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Definition: Customer Electricity Use Optimization | Open Energy Information  

Open Energy Info (EERE)

Customer Electricity Use Optimization Customer Electricity Use Optimization Jump to: navigation, search Dictionary.png Customer Electricity Use Optimization Customer electricity use optimization is possible if customers are provided with information to make educated decisions about their electricity use. Customers could be able to optimize toward multiple goals such as cost, reliability, convenience, and environmental impact.[1] Also Known As Energy conservation Related Terms electricity generation References ↑ SmartGrid.gov 'Description of Functions' An LikeLike UnlikeLike You like this.Sign Up to see what your friends like. inline Glossary Definition Retrieved from "http://en.openei.org/w/index.php?title=Definition:Customer_Electricity_Use_Optimization&oldid=480282" Categories: Definitions

182

Voices of Experience: Insights on Smart Grid Customer Engagement (July  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Voices of Experience: Insights on Smart Grid Customer Engagement Voices of Experience: Insights on Smart Grid Customer Engagement (July 2013) Voices of Experience: Insights on Smart Grid Customer Engagement (July 2013) The success of the Smart Grid will depend in part on consumers taking a more proactive role in managing their energy use. This document is the result of a nine-month effort to compile information on the successful approaches used by utilities to engage customers regarding smart grid technology deployments. Voices of Experience: Insights on Smart Grid Customer Engagement provides practical advice from utilities that have implemented smart grid projects to educate and engage their customers. Customer engagement within the electric power industry is an evolving, ongoing process that is just beginning to emerge. While this guide may lean

183

Assessment of (mu)grid distributed energy resource potential using DER-CAM and GIS  

E-Print Network (OSTI)

of Customer Adoption of Distributed Energy Resources. ”Assessment of µGrid Distributed Energy Potential Using DER-Assessment of µGrid Distributed Energy Resource Potential

Edwards, Jennifer L.; Marnay, Chris; Bartholomew, Emily; Ouaglal, Boubekeur; Siddiqui, Afzal S.; LaCommare, Kristina S.H.

2002-01-01T23:59:59.000Z

184

Independent review of estimated load reductions for PJM's small customer load response pilot project  

E-Print Network (OSTI)

customer mix and the number of customers with electric wateron a much- larger number (215) of customers, and despite thenumber of EWH program participants on each network: 631 customers

Heffner, G.; Moezzi, M.; Goldman, C.

2004-01-01T23:59:59.000Z

185

RECs: Tapping Into The Commercial Customer  

NLE Websites -- All DOE Office Websites (Extended Search)

June 2004 issue June 2004 issue Copyright © 2004 Zackin Publications Inc. All Rights Reserved. RECs: Tapping Into The Commercial Customer Making the business case for renewable energy certificates bought by large corporations. BY CRAIG HANSON AND VINCE VAN SON I n last month's issue, we introduced the renewable energy certificate (REC), a relatively new product that represents the environmental and other non-electrical attributes associated with 1 MWh of electricity generated from renewable resources. We also reported that several major U.S. corporations, including Alcoa, Cargill Dow LLC, Delphi Corp., DuPont, Interface, Johnson & Johnson, Kinko's, Pitney Bowes and Sta- ples, completed the nation's largest aggre- gate corporate purchase of RECs in Sep- tember 2003. Together, these members of

186

Simulating Customer Experience and Word-Of-Mouth in Retail -A Case Study  

E-Print Network (OSTI)

the number of satisfied customers at the end of the day to calculate the number of additional customers number of customers are in the department and consequently the demands placed on staff members customers and the lost customers is the same for both strategies. We count the number of customers from

Aickelin, Uwe

187

Future Power Systems 21 - The Smart Customer | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 - The Smart Customer 1 - The Smart Customer Future Power Systems 21 - The Smart Customer Future Power Systems 21 - The Smart Customer: From Future Power Systems (FPS) articles 18 and 19 we can see that there are a number of different trading and tariff mechanisms which can be employed on the utility to customer interface to enable participation. From article 20 we see that there will be different pricing profiles on similar day types due to changes in availability of renewable generation. Future Power Systems 21 - The Smart Customer More Documents & Publications Future Power Systems 20: The Smart Enterprise, its Objective and Forecasting. AARP, National Consumer Law Center, and Public Citizen Comments to:DEPARTMENT OF ENERGY Smart Grid RFI: Addressing Policy and Logistical

188

Appendix B Sierra Nevada Region Customer Groups and Economic Regions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

A- Not available electronically. A- Not available electronically. Appendix B Sierra Nevada Region Customer Groups and Economic Regions The list included in this appendix shows the Sierra Nevada Region customers with contracts expiring in the year 2004. The list indicates which customer group each customer is considered a part of for purposes of analysis. The list also shows which economic region each customer is located in. Some customers are not included in a subregion of the central and northern California region. Further discussion of the economic regions is included in Section 4.9.4 and in Appendix L. Appendix C Renewable Technology Cost Information Matrix The development of the renewable technology matrix (RTM) was undertaken to determine the primary cost and performance characteristics of renewable technologies in

189

"2012 Non-Utility Power Producers- Customers"  

U.S. Energy Information Administration (EIA) Indexed Site

Customers" Customers" "(Data from form EIA-861U)" ,,,"Number of Customers" "Entity","State","Ownership","Residential","Commercial","Industrial","Transportation","Total" "Riceland Foods Inc.","AR","Non_Utility",".",".",1,".",1 "Constellation Solar Arizona LLC","AZ","Non_Utility",".",".",1,".",1 "FRV SI Transport Solar LP","AZ","Non_Utility",".",1,".",".",1 "MFP Co III, LLC","AZ","Non_Utility",".",1,".",".",1 "RV CSU Power II LLC","AZ","Non_Utility",".",1,".",".",1

190

Categorical Exclusion for U.S. Customs and Border  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion for U.S. Customs and Border Exclusion for U.S. Customs and Border Protection Non-Intrusive Inspection Tests, Pacific Northwest National Laboratory, Richland, Washington Proposed Action To support U.S. Department of Homeland Security's Customs and Border Protection, the U.S. Department of Energy (DOE) Pacific Northwest Site Office (PNSO) proposes to perform testing of radiation detection equipment using a portable linear accelerator (LINAC) at the Pacific Northwest

191

Custom Renewable Energy Projects (Oregon) | Open Energy Information  

Open Energy Info (EERE)

on October 16, 2012. Financial Incentive Program Place Oregon Name Custom Renewable Energy Projects Incentive Type State Grant Program Applicable Sector Agricultural,...

192

Number of Marketers Serving Residential Customers, December 2002  

U.S. Energy Information Administration (EIA)

Number of Marketers Serving Residential Customers, December 2002. State/District *Total Marketers ... Gives number of marketers but no names: Georgia: 10: 10:

193

California Customer Load Reductions during the Electricity Crisis...  

Open Energy Info (EERE)

California Customer Load Reductions during the Electricity Crisis: Did They Help to Keep the Lights On? Jump to: navigation, search Tool Summary LAUNCH TOOL Name: California...

194

Customer Survey Office of Field Financial Management | National...  

National Nuclear Security Administration (NNSA)

Customer Survey Office of Field Financial Management | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear...

195

Making the most of Responsive Electricity Customer. Energy Efficiency...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Making the most of Responsive Electricity Customer. Energy Efficiency and Demand Response: How do we make the most out of using less energy? Making the most of Responsive...

196

Customer satisfaction of dining experience in Malaysian malay restaurants.  

E-Print Network (OSTI)

??The subject of this Ph.D. thesis is Customer Satisfaction in Malaysian Malay Restaurants Dining Experience. The research was conducted in three Malay family restaurants in… (more)

Ismail, S.

2012-01-01T23:59:59.000Z

197

Customer Perceptions of Restaurant Cleanliness: A Cross Cultural Study.  

E-Print Network (OSTI)

??What is a clean restaurant in customersâ viewpoints? Restaurant cleanliness is considered one of the most significant conditions when customers evaluate overall restaurant quality or… (more)

Yoo, Seung Ah

2012-01-01T23:59:59.000Z

198

Smarter Meters Help Customers Budget Electric Service Costs  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1) two-way communications which allow customers to monitor their electricity consumption and take steps to better manage their electric bills; 2) a voluntary, pre-payment...

199

Flexible, high?performance speech synthesizer using custom NMOS circuitry  

Science Conference Proceedings (OSTI)

A programmable digital signal processor (PDSP) intended primarily for speech synthesis applications has been developed using custom NMOS LSI circuitry. Key features include high speech quality

Jim Caldwell

1978-01-01T23:59:59.000Z

200

The Future of Utility Customer-Funded Energy Efficiency Programs in the  

NLE Websites -- All DOE Office Websites (Extended Search)

The Future of Utility Customer-Funded Energy Efficiency Programs in the The Future of Utility Customer-Funded Energy Efficiency Programs in the United States: Projected Spending and Savings to 2025 Title The Future of Utility Customer-Funded Energy Efficiency Programs in the United States: Projected Spending and Savings to 2025 Publication Type Report Year of Publication 2013 Authors Barbose, Galen L., Charles A. Goldman, Ian M. Hoffman, and Megan A. Billingsley Date Published 01/2013 Keywords electricity markets and policy group, energy analysis and environmental impacts department, renewable energy: policy Abstract We develop projections of future spending on, and savings from, energy efficiency programs funded by electric and gas utility customers in the United States, under three scenarios through 2025. Our analysis, which updates a previous LBNL study, relies on detailed bottom-up modeling of current state energy efficiency policies, regulatory decisions, and demand-side management and utility resource plans. The three scenarios are intended to represent a range of potential outcomes under the current policy environment (i.e., without considering possible major new policy developments).

Note: This page contains sample records for the topic "ole potential customers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Introduction of New Technologies to Competing Industrial Customers  

Science Conference Proceedings (OSTI)

Motivated by several examples from industry, such as the introduction of a biotechnology-based process innovation in nylon manufacturing, we consider a technology provider that develops and introduces innovations to a market of industrial customers---original ... Keywords: business-to-business, game theory, industrial customers, industrial markets, multistage game, technology adoption, technology introduction

Sanjiv Erat; Stylianos Kavadias

2006-11-01T23:59:59.000Z

202

Customer Side Monitoring at an Automobile Brake Manufacturer  

Science Conference Proceedings (OSTI)

This customer-side monitoring project correlated distribution-related power quality (PQ) events with customer-side events and vice-versa and characterized equipment sensitivity to voltage variations. It also characterized overall levels of PQ on the feeder and in the facility and compared these levels with the national baseline sample being gathered for the Distribution Power Quality project.

2003-12-31T23:59:59.000Z

203

Customization and Marketing of Monsoon Forecasts A CSIRCMMACS Synergy  

E-Print Network (OSTI)

Customization and Marketing of Monsoon Forecasts A CSIRCMMACS Synergy Criteria for Technical forecasts of monsoon can significantly aid many sectors like agriculture, power and production industries to the operational forecast, to develop and deliver customized monsoon forecasts based on user need is required

Swathi, P S

204

An effective customization procedure with configurable standard models  

Science Conference Proceedings (OSTI)

In electronic catalogs, commodities such as computers and electronic equipment are specified as standard models although a variety of possible alternative specifications can exist as a combination of selected options; therefore, customized configurations ... Keywords: Case-based reasoning, Comparison shopping, Configuration, Constraint satisfaction problem, Customization

Hyun Jung Lee; Jae Kyu Lee

2005-11-01T23:59:59.000Z

205

Customer experience requirements for e-commerce websites  

Science Conference Proceedings (OSTI)

With the emergence of highly interactive applications on the World Wide Web has come a realisation that customer engagement is an increasingly important requirements consideration. It is currently not clear, however, what kinds of requirements websites ... Keywords: aesthetics, customer experience, e-commerce, electronic commerce, heuristics, purchase intentions, requirements engineering, usability, user satisfaction, web requirements, website content, website presentation, website usability

Oscar De Bruijn; Antonella De Angeli; Alistair Sutcliffe

2007-07-01T23:59:59.000Z

206

An integrated parameterized tool for designing a customized tracheal stent  

Science Conference Proceedings (OSTI)

The design of customized biomedical devices is certainly relevant nowadays, and to achieve higher implantation accuracy, custom-made implants need to be developed. The aim of this work is to present an integrated tool for the design of a tracheal stent ... Keywords: Additive manufacturing, Attribute listing, Design methodology, Inventive algorithm, QFD, TRIZ, Tracheal stent

Evila L. Melgoza; LíDia Serenó; Antoni Rosell; Joaquim Ciurana

2012-12-01T23:59:59.000Z

207

Customer Side Monitoring at a Waste Water Treatment Plant  

Science Conference Proceedings (OSTI)

This customer-side monitoring project correlated distribution-related power quality (PQ) events with customer side events and vice-versa and characterized equipment sensitivity to voltage variations. It also characterized overall levels of PQ on the feeder and in the facility and compared these levels with the national baseline sample being gathered for the Distribution Power Quality project.

2003-12-31T23:59:59.000Z

208

Proceedings: Meeting Customer Needs With Heat Pumps--1989  

Science Conference Proceedings (OSTI)

Electric heat pumps provide a growing number of satisfied customers with space heating and cooling, humidity control, and water heating. Today's increasingly efficient heat pumps emphasize customer comfort and economy and help utilities satisfy their load-shape objectives in an environmentally acceptable manner.

1991-02-27T23:59:59.000Z

209

Google Custom Search API [Google search in your hands  

E-Print Network (OSTI)

Google Custom Search API [Google search in your hands] Nicholas Weininger www.google.com/cse code.google.com/apis/customsearch #12;Our mission and history Google Custom Search allows anybody to leverage the Google search platform Used extensively within Google (Help Center, Blogger, etc.) #12;What does a Search API mean to us

Chakrabarti, Soumen

210

Isolating untrusted software extensions by custom scoping rules  

Science Conference Proceedings (OSTI)

In a modern programming language, scoping rules determine the visibility of names in various regions of a program. In this work, we examine the idea of allowing an application developer to customize the scoping rules of its underlying language. We demonstrate ... Keywords: Access control, Custom scoping rules, Java, Language-based security, Name visibility control

Philip W. L. Fong; Simon Orr

2010-10-01T23:59:59.000Z

211

Product platform design and customization: Status and promise  

Science Conference Proceedings (OSTI)

In an effort to improve customization for today's highly competitive global marketplace, many companies are utilizing product families and platform-based product development to increase variety, shorten lead times, and reduce costs. The key to a successful ... Keywords: Mass Customization, Product Family, Product Platform, Product Variety

Timothy W. Simpson

2004-01-01T23:59:59.000Z

212

Dakota Electric Association - Commercial and Industrial Custom Energy Grant  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Dakota Electric Association - Commercial and Industrial Custom Dakota Electric Association - Commercial and Industrial Custom Energy Grant Program Dakota Electric Association - Commercial and Industrial Custom Energy Grant Program < Back Eligibility Commercial Industrial Savings Category Other Maximum Rebate 50% of total project costs and 100,000 annually in grants/rebates per member. Program Info State Minnesota Program Type Utility Grant Program Rebate Amount 50% of total project costs up to 100,000 Provider Dakota Electric Service Dakota Electric's Custom Energy Grant Program is offered for any commercial or industrial customer that installs qualifying energy-efficient products which exceed conventional models and result in a reduction of electric use, when a specific rebate program is not currently available. Any energy

213

Idaho Power - Large Commercial Custom Efficiency Program | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Large Commercial Custom Efficiency Program Large Commercial Custom Efficiency Program Idaho Power - Large Commercial Custom Efficiency Program < Back Eligibility Agricultural Commercial Industrial Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Manufacturing Other Appliances & Electronics Commercial Lighting Lighting Maximum Rebate Commercial and Industrial: 70% of project cost Custom Incentive for Existing Irrigation System Replacement: up to 75% of the total project cost Custom Incentive for a New Irrigation System: up to 10% of the total project cost Program Info Funding Source Conservation Program Funding Charge State Idaho Program Type Utility Rebate Program Rebate Amount Commercial and Industrial: $0.12/kWh saved Agricultural Irrigation Efficiency: $0.25/annual kWh saved or $450/kW

214

Definition: Customer Energy Management Device and System | Open Energy  

Open Energy Info (EERE)

Device and System Device and System Jump to: navigation, search Dictionary.png Customer Energy Management Device and System A device that can control other energy devices such as thermostats, lighting, direct load control devices, or distributed energy resource within the customer premise. These devices may also receive information or control signals from utillities or third party energy service providers. These devices can help customers manage electricity usage automatically by utilizing information from service providers, or preferences set by the customer.[1] Related Terms energy, electricity generation, distributed energy resource References ↑ https://www.smartgrid.gov/category/technology/customer_energy_management_device_and_system [[Cat LikeLike UnlikeLike You like this.Sign Up to see what your friends like.

215

Making the most of Responsive Electricity Customer. Energy Efficiency and  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Making the most of Responsive Electricity Customer. Energy Making the most of Responsive Electricity Customer. Energy Efficiency and Demand Response: How do we make the most out of using less energy? Making the most of Responsive Electricity Customer. Energy Efficiency and Demand Response: How do we make the most out of using less energy? Making the most of Responsive Electricity Customer. Energy Efficiency and Demand Response: How do we make the most out of using less energy? Making the most of Responsive Electricity Customer. Energy Efficiency and Demand Response: How do we make the most out of using less energy? More Documents & Publications 2012 Advanced Applications Research & Development Peer Review - Day 2 Presentations Energy Storage Systems 2010 Update Conference Presentations - Day 2, Session 2

216

Making the most of Responsive Electricity Customer. Energy Efficiency and  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Making the most of Responsive Electricity Customer. Energy Making the most of Responsive Electricity Customer. Energy Efficiency and Demand Response: How do we make the most out of using less energy? Making the most of Responsive Electricity Customer. Energy Efficiency and Demand Response: How do we make the most out of using less energy? Making the most of Responsive Electricity Customer. Energy Efficiency and Demand Response: How do we make the most out of using less energy? Making the most of Responsive Electricity Customer. Energy Efficiency and Demand Response: How do we make the most out of using less energy? More Documents & Publications 2012 Advanced Applications Research & Development Peer Review - Day 2 Presentations Demand Response National Trends: Implications for the West? Energy Storage Systems 2010 Update Conference Presentations - Day 2,

217

Customer Name: (First name, middle initial, last name) Social Security Number or Federal ID Number TAMU Customer Number (if assigned) Customer Information: Persons authorized to make purchases on this account  

E-Print Network (OSTI)

Customer Name: (First name, middle initial, last name) Social Security Number or Federal ID Number TAMU Customer Number (if assigned) Customer Information: Persons authorized to make purchases: Email Address: Phone: Fax: Phone: Fax: Name: Title: Customer Representative Signature: Date: This form

Meagher, Mary

218

OLES Relevant Standards  

Science Conference Proceedings (OSTI)

... residue (GSR) by scanning electron microscopy/energy-dispersive X-ray ... Specifications for Law Enforcement Records Management Systems (RMS ...

2013-03-13T23:59:59.000Z

219

OLES, Forensics Home  

Science Conference Proceedings (OSTI)

... Forensic scientists use techniques from many areas of science to analyze ... For example, projects relating to computer usage in crimes are based in ...

2013-09-04T23:59:59.000Z

220

Towards real-time measurement of customer satisfaction using automatically generated call transcripts  

Science Conference Proceedings (OSTI)

Customer satisfaction is a very important indicator of how successful a contact center is at providing services to the customers. Contact centers typically conduct a manual survey with a randomly selected group of customers to measure customer satisfaction. ... Keywords: classification, contact center calls, customer satisfaction, machine learning, natural language processing, speech analytics, text mining

Youngja Park; Stephen C. Gates

2009-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "ole potential customers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Who/where are my new customers? Salvatore Rinzivillo and Salvatore Ruggieri  

E-Print Network (OSTI)

. The average number of customers in the selected branches ranges from 14.500 to 21.500 per year. Data were the previous year, and of occasional customers, namely new customers seen only in a year. The number of new cell is labeled with the ratio of the number of new customers over the total number of customers

Ruggieri, Salvatore

222

Energy Bundle Bonus (WPS Customers Only) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Bundle Bonus (WPS Customers Only) Bundle Bonus (WPS Customers Only) Energy Bundle Bonus (WPS Customers Only) < Back Eligibility Agricultural Commercial Construction Fed. Government Industrial Institutional Local Government Multi-Family Residential Nonprofit Schools State Government Tribal Government Savings Category Other Heating & Cooling Commercial Heating & Cooling Heating Home Weatherization Commercial Weatherization Sealing Your Home Cooling Construction Design & Remodeling Manufacturing Appliances & Electronics Ventilation Heat Pumps Commercial Lighting Lighting Water Heating Windows, Doors, & Skylights Maximum Rebate 75% of project cost or $25,000 Program Info State Wisconsin Program Type State Rebate Program Rebate Amount 2 unrelated projects: 25% bonus 3 unrelated projects: 50% bonus

223

Chemical failure modes of AlQ3-based OLEDs: AlQ3 hydrolysis John E. Knox,w Mathew D. Halls, Hrant P. Hratchianz and H. Bernhard Schlegel*  

E-Print Network (OSTI)

in promoting the rate of chemical failure modes in OLED devices. The activation energy for the AlQ31 hydro characterize AlQ3 and the hydrolysis pathway product, AlQ2OH. The activation energy for the cationic AlQ3 with close regard to their electronic energy levels, usually such that the electrons are confined

Schlegel, H. Bernhard

224

Customer adoption of small-scale on-site power generation  

Science Conference Proceedings (OSTI)

The electricity supply system is undergoing major regulatory and technological change with significant implications for the way in which the sector will operate (including its patterns of carbon emissions) and for the policies required to ensure socially and environmentally desirable outcomes. One such change stems from the rapid emergence of viable small-scale (i.e., smaller than 500 kW) generators that are potentially competitive with grid delivered electricity, especially in combined heat and power configurations. Such distributed energy resources (DER) may be grouped together with loads in microgrids. These clusters could operate semi-autonomously from the established power system, or macrogrid, matching power quality and reliability more closely to local end-use requirements. In order to establish a capability for analyzing the effect that microgrids may have on typical commercial customers, such as office buildings, restaurants, shopping malls, and grocery stores, an economic mod el of DER adoption is being developed at Berkeley Lab. This model endeavors to indicate the optimal quantity and type of small on-site generation technologies that customers could employ given their electricity requirements. For various regulatory schemes and general economic conditions, this analysis produces a simple operating schedule for any installed generators. Early results suggest that many commercial customers can benefit economically from on-site generation, even without considering potential combined heat and power and reliability benefits, even though they are unlikely to disconnect from the established power system.

Siddiqui, Afzal S.; Marnay, Chris; Hamachi, Kristina S.; Rubio, F. Javier

2001-04-01T23:59:59.000Z

225

An Agent-Based Simulation of In-Store Customer Experiences  

E-Print Network (OSTI)

Agent-based modelling and simulation offers a new and exciting way of understanding the world of work. In this paper we describe the development of an agent-based simulation model, designed to help to understand the relationship between human resource management practices and retail productivity. We report on the current development of our simulation model which includes new features concerning the evolution of customers over time. To test some of these features we have conducted a series of experiments dealing with customer pool sizes, standard and noise reduction modes, and the spread of the word of mouth. Our multi-disciplinary research team draws upon expertise from work psychologists and computer scientists. Despite the fact we are working within a relatively novel and complex domain, it is clear that intelligent agents offer potential for fostering sustainable organisational capabilities in the future.

Siebers, Peer-Olaf; Celia, Helen; Clegg, Christopher

2008-01-01T23:59:59.000Z

226

Optimal Reservation Deposit Policies in the Presence of Rational Customers and Retail Competition  

E-Print Network (OSTI)

which an uncertain number of customers, with valuation needrm can estimate the number of customers who would attempt torm to determine the number of customers who would attempt to

Georgiadis, G.; Tang, C. S.

2010-01-01T23:59:59.000Z

227

V-152: Cisco Unified Customer Voice Portal (CVP) Multiple Vulnerabilities |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2: Cisco Unified Customer Voice Portal (CVP) Multiple 2: Cisco Unified Customer Voice Portal (CVP) Multiple Vulnerabilities V-152: Cisco Unified Customer Voice Portal (CVP) Multiple Vulnerabilities May 9, 2013 - 6:00am Addthis PROBLEM: Multiple vulnerabilities have been reported in Cisco Unified Customer Voice Portal (CVP) PLATFORM: The vulnerabilities are reported in versions prior to 9.0.1 ES 11 ABSTRACT: Various components of Cisco Unified CVP are affected. These vulnerabilities can be exploited independently; however, more than one vulnerability could be exploited on the same device. REFERENCE LINKS: Secunia Advisory SA53306 Cisco Advisory ID cisco-sa-20130508-cvp Cisco Applied Mitigation Bulletin CVE-2013-1220 CVE-2013-1221 CVE-2013-1222 CVE-2013-1223 CVE-2013-1224 CVE-2013-1225 IMPACT ASSESSMENT: Medium DISCUSSION:

228

New Tool Yields Custom Environmental Data for Lifecycle Analysis |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Tool Yields Custom Environmental Data for Lifecycle Analysis New Tool Yields Custom Environmental Data for Lifecycle Analysis New Tool Yields Custom Environmental Data for Lifecycle Analysis September 10, 2012 - 1:00pm Addthis Washington, DC - A new, free online tool developed by a Department of Energy (DOE) laboratory allows users to customize and analyze the environmental impact of various fuels before they are used to create power. Information from the Excel™-based Upstream Dashboard - developed by the Office of Fossil Energy's National Energy Technology Laboratory (NETL) - can be used with other data or models to build an emissions inventory of various feedstocks as part of a comprehensive lifecycle analysis of the fuels. Lifecycle analysis is a new and innovative way to analyze and compare different pathways for producing power and transportation fuels.

229

Customer Survey Office of Field Financial Management | National Nuclear  

National Nuclear Security Administration (NNSA)

Customer Survey Office of Field Financial Management | National Nuclear Customer Survey Office of Field Financial Management | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > About Us > Our Operations > Acquisition and Project Management > Office of Financial Field Management > Customer Survey Office of Field Financial Management Customer Survey Office of Field Financial Management

230

Unlocking Customer Value: The Virtual Power Plant | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Unlocking Customer Value: The Virtual Power Plant Unlocking Customer Value: The Virtual Power Plant Unlocking Customer Value: The Virtual Power Plant The utility world has changed drastically in the last 10 years. New technologies like Smart Meters and fully functional Smart Grid concepts have made large inroads into the utility space and no one should want to be left behind. Utilities also face additional pressures from regulatory bodies who are continuing to encourage carbon reduction and greater customer flexibility. Utilities need to balance these new requirements with the financial obligations of providing reliable power (at a reasonable price) while attempting to meet shareholder expectations. Each of these goals are not necessarily complimentary, thus utilities need to determine how to address each one.

231

Idaho Power - Commercial Custom Efficiency Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Idaho Power - Commercial Custom Efficiency Program Idaho Power - Commercial Custom Efficiency Program Idaho Power - Commercial Custom Efficiency Program < Back Eligibility Commercial Industrial Institutional Local Government Nonprofit Schools State Government Tribal Government Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Manufacturing Other Appliances & Electronics Commercial Lighting Lighting Program Info Funding Source Conservation Program Funding Charge Energy Efficiency Riders State Oregon Program Type Utility Rebate Program Rebate Amount 0.12/kWh saved or 70% of project cost, whichever is less. Provider Idaho Power Company Large commercial and industrial Idaho Power customers that reduce energy usage through more efficient electrical commercial and industrial processes may qualify for an incentive that is the lesser of either 12 cents per

232

DOE Challenge Home Case Study, Transformations, Inc., Custom...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

to come. When Wes Parlee moved his family of three into their new 1,912-square-foot custom home in April 2012, he knew he'd get lower energy bills but he was still a bit...

233

Unlocking Customer Value: The Virtual Power Plant | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Unlocking Customer Value: The Virtual Power Plant Unlocking Customer Value: The Virtual Power Plant Unlocking Customer Value: The Virtual Power Plant The utility world has changed drastically in the last 10 years. New technologies like Smart Meters and fully functional Smart Grid concepts have made large inroads into the utility space and no one should want to be left behind. Utilities also face additional pressures from regulatory bodies who are continuing to encourage carbon reduction and greater customer flexibility. Utilities need to balance these new requirements with the financial obligations of providing reliable power (at a reasonable price) while attempting to meet shareholder expectations. Each of these goals are not necessarily complimentary, thus utilities need to determine how to address each one.

234

Guide to Custom Reporting in Portfolio Manager®  

NLE Websites -- All DOE Office Websites (Extended Search)

o o o "How To" Series Guide to Custom Reporting in Portfolio Manager ® EPA's ENERGY STAR Portfolio Manager ® tool helps you measure and track energy use, water use, and greenhouse gas emissions of your buildings, all in a secure online environment. You can use the results to identify under-performing buildings, set investment priorities, verify efficiency improvements, and receive EPA recognition for superior energy performance. The reporting feature in Portfolio Manager offers a variety of reports and graphics to help you view and share Create a Custom Report 1. Create a report template. 2. Use the template you created to: Generate a custom report. Share your template. Request data from others. performance metrics. This includes standard reports with popular metrics, as well as custom reports

235

AEP Ohio - Commercial Custom Project Rebate Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

- Commercial Custom Project Rebate Program - Commercial Custom Project Rebate Program AEP Ohio - Commercial Custom Project Rebate Program < Back Eligibility Commercial Fed. Government Industrial Institutional Local Government Nonprofit Schools State Government Tribal Government Savings Category Heating & Cooling Commercial Heating & Cooling Heating Cooling Other Heat Pumps Appliances & Electronics Commercial Lighting Lighting Manufacturing Maximum Rebate 50% of cost up to $300,000/project $600,000/year Sliding scale incentive reduction when calculated incentive exceeds $160,000/project. Program Info State Ohio Program Type Utility Rebate Program Rebate Amount 0.08/kWh (for one year energy savings) plus 100/kW AEP's demand reduction (at summer peak) Provider AEP Ohio AEP Ohio offers commercial customers incentives to upgrade inefficient

236

Definition: Smart Appliances And Equipment (Customer) | Open Energy  

Open Energy Info (EERE)

Appliances And Equipment (Customer) Appliances And Equipment (Customer) Jump to: navigation, search Dictionary.png Smart Appliances And Equipment (Customer) Home appliances and devices (i.e., thermostats, pool pumps, clothes washers/dryers, water heaters, etc.) that use wireless technology (i.e., ZigBee) to receive real-time data from the AMI system to control or modulate their operation.[1] Related Terms advanced metering infrastructure, smart grid References ↑ [www.smartgrid.gov/sites/default/files/pdfs/description_of_assets.pdf SmartGrid.gov 'Description of Assets'] An i LikeLike UnlikeLike You like this.Sign Up to see what your friends like. nline Glossary Definition Retrieved from "http://en.openei.org/w/index.php?title=Definition:Smart_Appliances_And_Equipment_(Customer)&oldid=493118"

237

New Tool Yields Custom Environmental Data for Lifecycle Analysis |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Tool Yields Custom Environmental Data for Lifecycle Analysis Tool Yields Custom Environmental Data for Lifecycle Analysis New Tool Yields Custom Environmental Data for Lifecycle Analysis September 10, 2012 - 1:00pm Addthis Washington, DC - A new, free online tool developed by a Department of Energy (DOE) laboratory allows users to customize and analyze the environmental impact of various fuels before they are used to create power. Information from the Excel™-based Upstream Dashboard - developed by the Office of Fossil Energy's National Energy Technology Laboratory (NETL) - can be used with other data or models to build an emissions inventory of various feedstocks as part of a comprehensive lifecycle analysis of the fuels. Lifecycle analysis is a new and innovative way to analyze and compare different pathways for producing power and transportation fuels.

238

LADWP - Non-Residential Custom Performance Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Non-Residential Custom Performance Program Non-Residential Custom Performance Program LADWP - Non-Residential Custom Performance Program < Back Eligibility Agricultural Commercial Fed. Government Industrial Local Government Nonprofit State Government Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Manufacturing Other Appliances & Electronics Commercial Lighting Lighting Program Info State California Program Type Utility Rebate Program Rebate Amount Lighting: $ 0.05 per kWh saved Air-Conditioning and Refrigeration (AC&R): $ 0.14 per kWh saved Other Equipment: $ 0.08 per kWh saved Wet Cleaning: $4,000 per cleaner Provider Los Angeles Department of Water and Power Los Angeles Department of Water and Power offers incentives to non-residential customers for the installation of energy saving measures,

239

California Customer Load Reductions during the Electricity Crisis: Did They  

Open Energy Info (EERE)

California Customer Load Reductions during the Electricity Crisis: Did They California Customer Load Reductions during the Electricity Crisis: Did They Help to Keep the Lights On? Jump to: navigation, search Tool Summary LAUNCH TOOL Name: California Customer Load Reductions during the Electricity Crisis: Did They Help to Keep the Lights On? Focus Area: Energy Efficiency Topics: Socio-Economic Website: eetd.lbl.gov/ea/ems/reports/49733.pdf Equivalent URI: cleanenergysolutions.org/content/california-customer-load-reductions-d Language: English Policies: Regulations Regulations: Mandates/Targets This report details the predicted electricity shortages and blackouts in California (summer 2001) that never occured, in part due to energy conservation measures taken on by the people of California. Intense media coverage and information campaigns about energy efficiency as well as

240

Better Buildings Neighborhood Program: Keep Customers-and Energy...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy-From Slipping Through the Cracks to someone by E-mail Share Better Buildings Neighborhood Program: Keep Customers-and Energy-From Slipping Through the Cracks on...

Note: This page contains sample records for the topic "ole potential customers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Smart customization : making evidence-based environmental decisions  

E-Print Network (OSTI)

This thesis examines the environmental benefits created by the manufacture, distribution, and consumer use of products that are mass customized (MC) or produced "on-demand" and tailored to individual end-user preferences. ...

Chin, Ryan C. C., 1974-

2012-01-01T23:59:59.000Z

242

Custom circuit design as a driver of microprocessor performance  

Science Conference Proceedings (OSTI)

This paper presents a survey of some of the most aggressive custom designs for CMOS processor products and prototypes in IBM. We argue that microprocessor performance growth, which has traditionally been driven primarily by CMOS technology and microarchitectural ...

D. H. Allen; S. H. Dhong; H. P. Hofstee; J. Leenstra; K. J. Nowka; D. L. Stasiak; D. F. Wendel

2000-11-01T23:59:59.000Z

243

The California Solar Initiative: Cost Trends in Customer-Sited...  

NLE Websites -- All DOE Office Websites (Extended Search)

The California Solar Initiative: Cost Trends in Customer-Sited PV Installations and the Impact of Retail Rate Design on the Economics of PV Systems Speaker(s): Ryan Wiser Date:...

244

Pluggable type-checking for custom type qualifiers in Java  

E-Print Network (OSTI)

We have created a framework for adding custom type qualifiers to the Javalanguage in a backward-compatible way. The type system designer definesthe qualifiers and creates a compiler plug-in that enforces theirsemantics. ...

Papi, Matthew M.

2007-09-17T23:59:59.000Z

245

High temperature solid oxide fuel cell: Customer test units  

DOE Green Energy (OSTI)

There are three 25-kW class SOFC customer test unit programs; two are in Japan (utility joint ventures), one for Southern California Edison Co. The two in Japan are described: Startup, testing, modifications, and operational performance are discussed.

Ray, E.R.; Veyo, S.E.

1993-11-01T23:59:59.000Z

246

Delivery optimization for a make to order custom wire mill  

E-Print Network (OSTI)

In the face of growing competition in the Tantalum business, H.C.Starck's management is minimizing the delivery time for custom-made capacitor-grade tantalum wire products. H.C. Starck, Inc., Newton, Massachusetts faces ...

Slivinskiy, Andrey L

2005-01-01T23:59:59.000Z

247

A methodology to assess cost implications of automotive customization  

E-Print Network (OSTI)

This thesis focuses on determining the cost of customization for different components or groups of components of a car. It offers a methodology to estimate the manufacturing cost of a complex system such as a car. This ...

Fournier, Laëtitia

2005-01-01T23:59:59.000Z

248

A computational approach to custom data representation for hardware accelerators  

Science Conference Proceedings (OSTI)

This thesis details the application of computational methods to the problem of determining custom data representations when building hardware accelerators for numerical computations. A majority of scientific applications which require hardware ...

Adam B. Kinsman

2010-01-01T23:59:59.000Z

249

PowerChoice Residential Customer Response to TOU Rates  

E-Print Network (OSTI)

1983. Time-of-Day Electricity Rates for the United States.Effect of Time-of-Use Rates In the Los Angeles ElectricityCustomer Response to TOU Rates. Research Into Action. Public

Peters, Jane S.

2010-01-01T23:59:59.000Z

250

Ameren Illinois (Electric)- Custom, HVAC, and Motor Business Efficiency Incentives  

Energy.gov (U.S. Department of Energy (DOE))

Prescriptive rebates are available for many HVAC and motor efficiency improvements. Pre-approval is required for all rebates. The programs are available only to non-residential customers that...

251

Ameren Illinois (Electric) - Custom, HVAC, and Motor Business Efficiency  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Ameren Illinois (Electric) - Custom, HVAC, and Motor Business Ameren Illinois (Electric) - Custom, HVAC, and Motor Business Efficiency Incentives Ameren Illinois (Electric) - Custom, HVAC, and Motor Business Efficiency Incentives < Back Eligibility Commercial Industrial Multi-Family Residential Nonprofit Savings Category Other Heating & Cooling Commercial Heating & Cooling Cooling Home Weatherization Construction Commercial Weatherization Design & Remodeling Manufacturing Sealing Your Home Ventilation Heat Pumps Heating Appliances & Electronics Commercial Lighting Lighting Water Heating Maximum Rebate $600,000/year/facility. Incentives $1-$200,000: paid at 100% Incentives $200,000-$600,000: paid at 50% Custom: 50% of incremental cost Retro-Commissioning: $200,000/year/facility; $100,000/project Leak Survey: $10,000

252

Natural Gas Utility Restructuring and Customer Choice Act (Montana)  

Energy.gov (U.S. Department of Energy (DOE))

These regulations apply to natural gas utilities that have restructured in order to acquire rate-based facilities. The regulations address customer choice offerings by natural gas utilities, which...

253

Revamping luxury : mass customization applied to the luxury goods market  

E-Print Network (OSTI)

This thesis seeks to understand how the crisis has impacted the definition of luxury goods in the mind of consumers and the implications this has for luxury goods companies. It also aims to present Mass Customization as ...

Edouard, Mélissa Susan Caroline Coleman

2009-01-01T23:59:59.000Z

254

Interoperability Robustness Checklist for Metering and Customer Communications  

Science Conference Proceedings (OSTI)

This report provides a strategic framework and a simplified checklist for the development and design of future dynamic customer-to-utility and customer-to-service-provider systems such as advanced metering and demand response. This framework and checklist is intended to help utilities ensure the technology they are deploying is flexible and robust enough to avoid premature obsolescence, vendor lock-in, and/or system-wide forklift upgrades.

2008-01-17T23:59:59.000Z

255

CLASSIFY-Applications: Volume 1: Gathering Information About Your Customers  

Science Conference Proceedings (OSTI)

EPRI's CLASSIFY System helps utilities understand the lifestyle, business, and energy needs of their residential, commercial, and industrial customers. These needs form the foundation of the attitudes and values that drive end-use equipment purchases and energy consumption. Such information is crucial if utilities are to develop and deliver customer-driven products and services. This report is available only to funders of Program 101A or 101.001. Funders may download this report at http://my.primen.com/...

1995-05-11T23:59:59.000Z

256

21st Century Customers: Volume 2: Business and Commerce  

Science Conference Proceedings (OSTI)

Understanding and meeting the evolving needs of business customers could be critical to the future prosperity of energy enterprises. This report examines five significant commercial sector businesses that are undergoing dramatic changes in their markets and relationships to consumers -- retail and food, wholesaling and warehousing, offices, health care, and education. The report provides a companion to Volume 1, 21st Century Customers: Volume 1: Industry and Manufacturing, covering the evolving needs of ...

1999-02-10T23:59:59.000Z

257

Customer Satisfaction Assessment at the Pacific Northwest National Laboratory  

SciTech Connect

The Pacific Northwest National Laboratory (PNNL) is developing and implementing a customer satisfaction assessment program (CSAP) to assess the quality of research and development provided by the laboratory. We present the customer survey component of the PNNL CSAP. The customer survey questionnaire is composed of 2 major sections, Strategic Value and Project Performance. The Strategic Value section of the questionnaire consists of 5 questions that can be answered with a 5 point Likert scale response. These questions are designed to determine if a project is directly contributing to critical future national needs. The Project Performance section of the questionnaire consists of 9 questions that can be answered with a 5 point Likert scale response. These questions determine PNNL performance in meeting customer expectations. Many approaches could be used to analyze customer survey data. We present a statistical model that can accurately capture the random behavior of customer survey data. The properties of this statistical model can be used to establish a "gold standard'' or performance expectation for the laboratory, and then assess progress. The gold standard is defined from input from laboratory management --- answers to 4 simple questions, in terms of the information obtained from the CSAP customer survey, define the standard: *What should the average Strategic Value be for the laboratory project portfolio? *What Strategic Value interval should include most of the projects in the laboratory portfolio? *What should average Project Performance be for projects with a Strategic Value of about 2? *What should average Project Performance be for projects with a Strategic Value of about 4? We discuss how to analyze CSAP customer survey data with this model. Our discussion will include "lessons learned" and issues that can invalidate this type of assessment.

Anderson, Dale N.; Sours, Mardell L.

2000-03-20T23:59:59.000Z

258

Customer satisfaction assessment at the Pacific Northwest National Laboratory  

SciTech Connect

The Pacific Northwest National Laboratory (PNNL) is developing and implementing a customer satisfaction assessment program (CSAP) to assess the quality of research and development provided by the laboratory. This report presents the customer survey component of the PNNL CSAP. The customer survey questionnaire is composed of two major sections: Strategic Value and Project Performance. Both sections contain a set of questions that can be answered with a 5-point Likert scale response. The strategic value section consists of five questions that are designed to determine if a project directly contributes to critical future national needs. The project Performance section consists of nine questions designed to determine PNNL performance in meeting customer expectations. A statistical model for customer survey data is developed and this report discusses how to analyze the data with this model. The properties of the statistical model can be used to establish a gold standard or performance expectation for the laboratory, and then to assess progress. The gold standard is defined using laboratory management input--answers to four questions, in terms of the information obtained from the customer survey: (1) What should the average Strategic Value be for the laboratory project portfolio? (2) What Strategic Value interval should include most of the projects in the laboratory portfolio? (3) What should average Project Performance be for projects with a Strategic Value of about 2? (4) What should average Project Performance be for projects with a Strategic Value of about 4? To be able to provide meaningful answers to these questions, the PNNL customer survey will need to be fully implemented for several years, thus providing a link between management perceptions of laboratory performance and customer survey data.

DN Anderson; ML Sours

2000-03-23T23:59:59.000Z

259

21st Century Customers: Volume 1: Industry and Manufacturing  

Science Conference Proceedings (OSTI)

Understanding and meeting the evolving needs of industrial customers could be critical to the future prosperity of energy enterprises. This report examines five significant industries that are undergoing dramatic changes in their markets and relationships to buyers of their products -- steel and aluminum, paper and pulp, chemicals, plastics, and food processing. The report provides a companion to Volume 2, 21st Century Customers: Volume 2: Business and Commerce, covering the evolving needs of five commer...

1999-02-10T23:59:59.000Z

260

Customer Participation in Behavioral Programs: A Review of Recruitment Experiences  

Science Conference Proceedings (OSTI)

As utilities seek new ways to develop relationships with their customers, as well as find new sources for electricity savings to help achieve ambitious energy efficiency goals, behavioral programs have been gaining more attention. However, many questions remain with regard to three main aspects of customer response as it relates to behavioral programs: participation, performance, and persistence. This report focuses solely on the “participation” aspect, which, of the three, is probably ...

2013-03-26T23:59:59.000Z

Note: This page contains sample records for the topic "ole potential customers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Customer reponse to day-ahead wholesale market electricity prices: Case study of RTP program experience in New York  

E-Print Network (OSTI)

Business Type Number of Customers Industrial Commercialwe identified a number of customer-specific factors that wealso constructed a number of customer-specific categorical

2004-01-01T23:59:59.000Z

262

Synthesis of Custom Processors based on Extensible Platforms  

E-Print Network (OSTI)

E#ciency and flexibility are critical, but often conflicting, design goals in embedded system design. The recent emergence of extensible processors promises a favorable tradeo# between e#- ciency and flexibility, while keeping design turnaround times short. Current extensible processor design flows automate several tedious tasks, but typically require designers to manually select the parts of the program that are to be implemented as custom instructions. In this work, we describe an automatic methodology to select custom instructions to augment an extensible processor, in order to maximize its e#ciency for a given application program. We demonstrate that the number of custom instruction candidates grows rapidly with program size, leading to a large design space, and that the quality (speedup) of custom instructions varies significantly across this space, motivating the need for the proposed flow. Our methodology features cost functions to guide the custom instruction selection process, as well as static and dynamic pruning techniques to eliminate inferior parts of the design space from consideration. Further, we employ a two-stage process, wherein a limited number of promising instruction candidates are first selected, and then evaluated in more detail through cycle-accurate instruction set simulation and synthesis of the corresponding hardware, to identify the custom instruction combinations that result in the highest program speedup or maximize speedup under a given area constraint.

Fei Sun; Srivaths Ravi; Anand Raghunathan; Niraj K. Jha

2002-01-01T23:59:59.000Z

263

Preparation of CaO as OLED getter material through control of crystal growth of CaCO{sub 3} by block copolymers in aqueous solution  

SciTech Connect

As the starting materials of organic light-emitting diode (OLED) getter, calcium carbonate (CaCO{sub 3}) particles with various shapes and crystal structures have been successfully prepared with additives (L64 or PEGPG), which contain blocks of poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO). These CaCO{sub 3} particles were calcinated into highly crystalline calcium oxide (CaO) nanoparticles with high capacity of water adsorption up to 14.23 wt.%. The CaCO{sub 3} and CaO particles prepared at various conditions were characterized using the field emission scanning electron microscopy (FE-SEM), Fourier transform infrared microscopy (FT-IR), X-ray powder diffraction (XRD), and dynamic vapor sorption (DVS) method.

Park, Jae-Hyung [Department of Chemical Engineering, Hanyang University, Seoul 133-791 (Korea, Republic of); Oh, Seong-Geun [Department of Chemical Engineering, Hanyang University, Seoul 133-791 (Korea, Republic of)], E-mail: seongoh@hanyang.ac.kr

2009-01-08T23:59:59.000Z

264

The Effect on Electricity Consumption of the Commonwealth Edison Customer Applications Program: Phase 2 Final Analysis  

Science Conference Proceedings (OSTI)

This report describes the final Phase 2 analysis of the effects on residential customers' energy consumption patterns of Commonwealth Edison's (ComEd's) Customer Application Program (CAP).

2011-10-20T23:59:59.000Z

265

California customer load reductions during the electricity crisis: Did they help to keep the lights on?  

E-Print Network (OSTI)

Gas Residential Electricity Residential Gas Rate ($/therm)Residential customers were on an inverted block rate for electricityelectricity rates by customer (CPUC, 2001a). For residential

Goldman, Charles A.; Eto, Joseph H.; Barbose, Galen L.

2002-01-01T23:59:59.000Z

266

Custom-Instruction Synthesis for Extensible-Processor Platforms  

E-Print Network (OSTI)

Efficiency and flexibility are critical, but often conflicting, design goals in embedded system design. The recent emergence of extensible processors promises a favorable tradeoff between efficiency and flexibility, while keeping design turnaround times short. Current extensible processor design flows automate several tedious tasks, but typically require designers to manually select the parts of the program that are to be implemented as custom instructions. In this work, we describe an automatic methodology to select custom instructions to augment an extensible processor, in order to maximize its efficiency for a given application program. We demonstrate that the number of custom instruction candidates grows rapidly with program size, leading to a large design space, and that the quality (speedup) of custom instructions varies significantly across this space, motivating the need for the proposed flow. Our methodology features cost functions to guide the custom instruction selection process, as well as static and dynamic pruning techniques to eliminate inferior parts of the design space from consideration. Furthermore, we employ a two-stage process, wherein a limited number of promising instruction candidates are first short-listed using efficient selection criteria, and then evaluated in more detail through cycle-accurate instruction set simulation and synthesis of the corresponding hardware, to identify the custom instruction combinations that result in the highest program speedup or maximize speedup under a given area constraint. We have evaluated the proposed techniques using a state-of-the-art extensible processor platform, in the context of a commercial design flow. Experiments with several benchmark programs indicate that custom processors synthesized using automa...

Fei Sun; Student Member; Anand Raghunathan; Srivaths Ravi; Senior Member; Niraj K. Jha

2004-01-01T23:59:59.000Z

267

Integrated analysis of customer value of generation system reliability in India  

SciTech Connect

An analytical framework that integrates generation resource outage characteristics and customer value of electricity supply is developed to represent and evaluate reliability of the power system in north India. The composite outage cost function is estimated to be of log-linear form based on the regression analysis of data obtained through extensive customer field surveys in the region. The research illustrates that potentially higher direct outage costs have been displaced by relatively lower adaptive response investments to counteract the impact of interruptions. The implicit reliability of the country`s generation capacity plan through 2000, used along with the outage cost estimates, gives an interrupted energy value, a customer-value-based reliability index, of 2.30 Rupees per kilowatt-hour not served in 1990 ($US 1990 = Rupees 17.50). The outage cost-based reliability planning criterion provides an optimal level of reliability equivalent of 9.1% loss of load probability (LOLP). A comparison reveals that the generation capacity program is unreliable in the beginning but becomes overly reliable toward the later years of the plan.

Sarkar, A. [Univ. of Wisconsin, Madison, WI (United States). Inst. for Environmental Studies; Shrestha, R.M. [Asian Inst. of Tech., Bangkok (Thailand). School of Environment, Resources and Development

1996-07-01T23:59:59.000Z

268

California customer load reductions during the electricity crisis: Did they help to keep the lights on?  

SciTech Connect

Recurring electricity shortages and rolling blackouts were widely forecasted for summer 2001 in California. Despite these predictions, blackouts were never ordered - in large part, due to the dramatic reductions in electricity use throughout the state. Compared to summer 2000, Californians reduced electricity usage by 6 percent and average monthly peak demand by 8 percent. Our analysis suggests that these reductions were not caused by either the weather or the downturn in the state's economy; rather, they were the result of extraordinary efforts by Californians to reduce electricity consumption. Based on the California Independent System Operator's (CAISO) available operating reserve margin during summer 2001, we estimate that the peak load reductions, which ranged between 3,200 and 5,600 MW in the four summer months, potentially avoided between 50 and 160 hours of rolling blackouts. This extraordinary response by Californians can be attributed to several factors including media coverage and informational campaigns that affected public awareness and understanding, real and/or perceived increases in electricity rates, and various policies and programs deployed by state policymakers and regulators to facilitate customer load reductions. Among these programs, we review the state's 20/20 rebate program, the utilities' energy efficiency programs, programs or initiatives implemented by the California Energy Commission and other state agencies, and load management and demand response programs offered by the state's investor-owned electric utilities and the CAISO. We estimate that energy efficiency and onsite generation projects that were initiated in 2001 will account for about 1,100 MW of customer load reductions, once all projects are installed. These savings represent about 25-30 percent of the observed load reductions and are likely to persist for many years. The persistence of the remaining savings, which were due to changes that customers made in their conservation behavior and energy management operations, will be heavily influenced by customers' perception of continuing electricity crises or significant energy problems and price sensitivity to retail rate trends. The State's current demand response (DR) capability enrolled in utility or CAISO programs is somewhat lower than prior to the crisis. However, in the long run, enabling technologies for demand response deployed through the CEC's Demand Responsive Buildings and Real-time Metering programs have the potential to significantly increase demand response capability. While unique factors led to the electricity crisis in California, we believe the lessons learned from electricity customers' response may be useful for other regions faced with the prospect of electricity shortages. During a short-term crisis, a comprehensive set of load reduction programs and policies can make a significant contribution towards maintaining electric system reliability and can be an effective alternative to strategies that rely solely on rationing demand (e.g. rolling blackouts) or dramatic price increases. Information from various media sources contributed to very high customer awareness of the electricity crisis and helped spur customers to take actions to reduce their electricity usage. Customers viewed the media as an important, and in many cases, trusted information source, which appears to have increased their receptivity to participating in various State and utility initiatives. A commitment to ratepayer-funded energy efficiency programs and energy efficiency standards for appliances and buildings are critical elements of a long-term strategy to dampen growth in electricity demand. California's energy efficiency services delivery infrastructure, which was strengthened by years of ratepayer and State-funded programs, represents a significant resource that was ramped up quickly to respond to a short-term energy emergency.

Goldman, Charles A.; Eto, Joseph H.; Barbose, Galen L.

2002-05-01T23:59:59.000Z

269

Utilities Sell Lighting, Cooling and Heating to Large Customers  

E-Print Network (OSTI)

The electric utility industry is entering an era of unprecedented competition. Competition from traditional sources such as natural gas companies, customer cogeneration, and independent power producers are being joined by new sources of competition, namely, other electric utilities. Compounding this situation are two recent occurrences: 1) the passage of the Energy Policy Act of 1992 which encourages wheeling, and 2) the trend toward institutional and industrial customers outsourcing energy generation and production facilities to third-parties. The electric utility industry is searching for ways to combat this competition, develop more value-added services for their customers, and establish long-term contractual relationships with their important customers. Many utilities are considering selling customers not just electrical energy but the more usable forms of energy like lumens of light, chilled water, hot water, and steam. This paper and presentation will outline the recent and near future electric utility operating environment, introduce the numerous benefits that electric utilities derive from selling end-use output, and outline a number of utility efforts to develop end-use products and services.

Horne, M. L.; Zien, H. B.

1996-04-01T23:59:59.000Z

270

Customer Satisfaction and Network Experience in Mobile Telecommunications Dejan Radosavljevik DRADOSAV@LIACS.NL  

E-Print Network (OSTI)

need to write a program that calculates a customer's bill for a local cable company. There are two customer. The program should also ask the user for the number of premium channels to which the customer subscribes and, in the case of business customers, the number of basic service connections. Problem analysis

Putten, Peter van der

271

Evaluation and selection in product design for mass customization: A knowledge decision support approach  

Science Conference Proceedings (OSTI)

Mass customization has been identified as a competitive strategy by an increasing number of companies. Family-based product design is an efficient and effective means to realize sufficient product variety, while satisfying a range of customer demands ... Keywords: Customer-Driven Design, Design Evaluation, Fuzzy Clustering, Fuzzy Ranking, Knowledge Support, Mass Customization, Multicriteria Decision Making, Product Family Design, Product Platform

Xuan F. Zha; Ram D. Sriram; Wen F. Lu

2004-01-01T23:59:59.000Z

272

The Joint Sales Impact of Frequency Reward and Customer Tier Components of Loyalty Programs  

Science Conference Proceedings (OSTI)

We estimate the joint impact of the frequency reward and customer tier components of a loyalty program on customer behavior and resultant sales. We provide an integrated analysis of a loyalty program incorporating customers' purchase and cash-in decisions, ... Keywords: customer tier programs, database marketing, frequency reward, loyalty program, segmentation

Praveen K. Kopalle; Yacheng Sun; Scott A. Neslin; Baohong Sun; Vanitha Swaminathan

2012-03-01T23:59:59.000Z

273

Customer Relationship Management for Energy Companies: New Approaches to Meeting Changing Needs  

Science Conference Proceedings (OSTI)

This report provides readers with an understanding of the need to revise customer service practices using systems and experiences from other industries as models. At its most refined level, "customer relationship management" is the key to profitability because it provides information and processes that permit effective customer segmentation and successful product development efforts targeted to well-defined and well-understood customer needs.

2001-11-07T23:59:59.000Z

274

Approaches to Electric Utility Energy Efficiency for Low Income Customers  

Open Energy Info (EERE)

Approaches to Electric Utility Energy Efficiency for Low Income Customers Approaches to Electric Utility Energy Efficiency for Low Income Customers in a Changing Regulatory Environment Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Approaches to Electric Utility Energy Efficiency for Low Income Customers in a Changing Regulatory Environment Focus Area: Energy Efficiency Topics: Best Practices Website: www.ornl.gov/~webworks/cppr/y2001/misc/99601.pdf Equivalent URI: cleanenergysolutions.org/content/approaches-electric-utility-energy-ef Language: English Policies: "Regulations,Financial Incentives" is not in the list of possible values (Deployment Programs, Financial Incentives, Regulations) for this property. Regulations: Feebates This report, written for members of the Weatherization Assistance Program

275

OSTI Customized, Office of Scientific and Technical Information, USDOE  

Office of Scientific and Technical Information (OSTI)

Customized Resources for Others Customized Resources for Others OSTI applies these capabilities to provide customized information tools and services for individual DOE offices and non-DOE government entities on a cost-reimbursable basis. These services are provided under the authority of the Economy Act (31 U.S.C. 1535-36). Expertise is available in a range of technical areas, including: Information science and subject-matter analysis Metadata and full-text management Electronic dissemination using various media Distributed searching Data harvesting OSTI develops and maintains subject-specific databases, web portals and websites, manages information systems, and provides electronic publishing and creative services to help DOE program offices, other government agencies, and international organizations better manage their information

276

Customer Demand Issues in SmartGrids European Platform: Relevant  

NLE Websites -- All DOE Office Websites (Extended Search)

Customer Demand Issues in SmartGrids European Platform: Relevant Customer Demand Issues in SmartGrids European Platform: Relevant Initiatives Speaker(s): Carlos Alvarez-Bel Date: June 26, 2012 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Mary Ann Piette SmartGrids technological platform was created by the European Commission in order to develop and identify research topics and objectives to facilitate the implementation of future electric grids. Smart grid is, by definition, user-centric, which implies that enhancing and promoting customer participation in electricity markets and systems, from efficiency to demand response, is a key goal. Efficiency targets in Europe (20% energy reduction in 2020) will probably not be met and, on the contrary, the renewable generation share target of 20% for the same year seems affordable. These

277

Smarter Meters Help Customers Budget Electric Service Costs  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Tri-State Smart Grid Investment Grant Tri-State Smart Grid Investment Grant 1 Tri-State's service area includes parts of Fannin County, Georgia; Polk County, Tennessee; and Cherokee County, North Carolina. Smarter Meters Help Customers Budget Electric Service Costs Tri-State Electric Membership Cooperative (Tri-State) is a distribution rural electric cooperative that primarily serves more than 12,000 rural customers, many of whom have low-incomes living at or near poverty level across a multi-state region (see map). Under their smart grid project, Tri-State has replaced conventional electromechanical meters with solid-state smart meters and implemented advanced electricity service programs in order to give customers greater control over their energy use and costs.

278

RPS Customer-Sited Tier Regional Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

RPS Customer-Sited Tier Regional Program RPS Customer-Sited Tier Regional Program RPS Customer-Sited Tier Regional Program < Back Eligibility Agricultural Commercial Industrial Institutional Local Government Multi-Family Residential Nonprofit Schools State Government Savings Category Bioenergy Solar Buying & Making Electricity Maximum Rebate 50% of installed costs; $6 million per applicant per round; and $3 million per individual project Program Info Funding Source RPS Surcharge Start Date 2011 Expiration Date 08/29/2013 State New York Program Type Performance-Based Incentive Rebate Amount Varies; applicants propose incentive levels (up to a 15% bonus for facilities located in Strategic Locations); up-front and performance payments available Provider New York State Energy Research and Development Authority

279

Redefining Customer Service is Essential to Modernizing Grid | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Redefining Customer Service is Essential to Modernizing Grid Redefining Customer Service is Essential to Modernizing Grid Redefining Customer Service is Essential to Modernizing Grid December 13, 2010 - 2:44pm Addthis Patricia A. Hoffman Patricia A. Hoffman Assistant Secretary, Office of Electricity Delivery & Energy Reliability What does this mean for me? Utilities should be communicating to you about projects to modernize the grid that are effecting you. When was the last time you talked to your electricity provider about something besides a service or billing problem? Put another way, does your utility ask for your opinion on its plans for the future? Do you feel like your concerns are heard? There has been a lot of news lately about projects that focus on modernizing the electric grid, with some of it focused on legitimate

280

Home Performance with Energy Star (WPS Customers Only) | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Performance with Energy Star (WPS Customers Only) Performance with Energy Star (WPS Customers Only) Home Performance with Energy Star (WPS Customers Only) < Back Eligibility Residential Savings Category Home Weatherization Commercial Weatherization Heating & Cooling Construction Commercial Heating & Cooling Design & Remodeling Other Sealing Your Home Ventilation Appliances & Electronics Commercial Lighting Lighting Program Info State Wisconsin Program Type State Rebate Program Rebate Amount WPS doubles the existing Air Sealing, Attic Insulation, Exterior Wall Insulation, Sill Box Insulation, Interior Foundation Insulation: 33.3% of improvement costs up to $1,500 through Home Performance with ENERGY STAR Total: 66% of improvement costs of up to $3,000 Assisted Home Performance Bonus: Additional 15% off, for a total of 90% off

Note: This page contains sample records for the topic "ole potential customers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Benefits of quantile regression for the analysis of customer lifetime value in a contractual setting: An application in financial services  

Science Conference Proceedings (OSTI)

The move towards a customer-centred approach to marketing, coupled with the increasing availability of customer transaction data, has led to an interest in understanding and estimating customer lifetime value (CLV). Several authors point out that, when ... Keywords: Customer lifetime value, Customer relationship management (CRM), Customer segmentation, Database marketing, Prediction interval, Quantile regression

Dries F. Benoit; Dirk Van den Poel

2009-09-01T23:59:59.000Z

282

Full list of Portfolio Manager custom reporting metrics | ENERGY STAR  

NLE Websites -- All DOE Office Websites (Extended Search)

Full list of Portfolio Manager custom reporting metrics Full list of Portfolio Manager custom reporting metrics Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources

283

"2012 Total Electric Industry- Customers"  

U.S. Energy Information Administration (EIA) Indexed Site

Customers" Customers" "(Data from forms EIA-861- schedules 4A, 4B, 4D, EIA-861S and EIA-861U)" "State","Residential","Commercial","Industrial","Transportation","Total" "New England",6203726,842773,34164,5,7080668 "Connecticut",1454651,150435,4647,2,1609735 "Maine",703770,89048,2780,0,795598 "Massachusetts",2699141,389272,21145,2,3109560 "New Hampshire",601697,104978,3444,0,710119 "Rhode Island",435448,57824,1927,1,495200 "Vermont",309019,51216,221,0,360456 "Middle Atlantic",15727423,2215961,45836,26,17989246 "New Jersey",3455302,489943,12729,6,3957980 "New York",7010740,1038268,8144,6,8057158

284

An analysis of the potential for shifting electric power demand within daily load requirement  

SciTech Connect

This report analyzes the potential for shifting the electric power demand within the daily load requirements for large industrial and commercial customers of the Philadelphia Electric Company. This shifting of electric power demand would tend to flatten the daily load curve of electricity demand, benefitting both the power industry and the consumer. Data on estimated summer load curves of large commercial and industrial customers are analyzed for load flattening potential. Cost savings to the customers are determined. (GRA)

Lamb, P.G.

1974-01-01T23:59:59.000Z

285

Methods and Guidelines for Assessing Customer District Energy Needs  

Science Conference Proceedings (OSTI)

A district energy (DE) system is a central supply of cooling and heating to individual buildings, which offers substantial energy savings over individual building cooling and heating systems. This interim report describes a method for assessing total building energy needs, with emphasis on evaluating customer heating and cooling loads and determining seasonal efficiencies for boiler and chiller plants.

1998-12-31T23:59:59.000Z

286

Rethinking custom ISE identification: a new processor-agnostic method  

Science Conference Proceedings (OSTI)

The last decade has witnessed the emergence of the Application Specific Instruction-set Processor (ASIP) as a viable platform for embedded systems. Extensible ASIPs allow the user to augment a base processor with Instruction Set Extensions (ISEs) that ... Keywords: ISE identification, custom processors, maximal cluster

Ajay K. Verma; Philip Brisk; Paolo Ienne

2007-09-01T23:59:59.000Z

287

CUSTOMER-SITED PHOTOVOLTAICS: STATE MARKET ANALYSIS Christy Herig  

E-Print Network (OSTI)

CUSTOMER-SITED PHOTOVOLTAICS: STATE MARKET ANALYSIS Christy Herig National Renewable Energy Lab the most expensive form of renewable energy, they are still the most affordable and market Information Agency has not released any new state emission data since the 1999 analysis [2]. The objectives

Perez, Richard R.

288

Table 14. Steam Coal Exports by Customs District  

U.S. Energy Information Administration (EIA) Indexed Site

Steam Coal Exports by Customs District Steam Coal Exports by Customs District (short tons) U.S. Energy Information Administration | Quarterly Coal Report, April - June 2013 Table 14. Steam Coal Exports by Customs District (short tons) U.S. Energy Information Administration | Quarterly Coal Report, April - June 2013 Year to Date Customs District April - June 2013 January - March 2013 April - June 2012 2013 2012 Percent Change Eastern Total 4,951,041 5,566,950 6,554,494 10,517,991 11,407,664 -7.8 Baltimore, MD 1,275,530 831,976 1,715,016 2,107,506 2,852,092 -26.1 Boston, MA 7 - 12 7 24 -70.8 Buffalo, NY 1,180 1,516 2,826 2,696 5,257 -48.7 New York City, NY 3,088 2,664 2,168 5,752 6,106 -5.8 Norfolk, VA 3,578,715 4,697,769 4,760,354 8,276,484 8,443,756 -2.0 Ogdensburg, NY 36,894 3,610 3,090 40,504 6,838 492.3 Philadelphia, PA

289

Test and Evaluation of Two Microturbines at Customer Sites  

Science Conference Proceedings (OSTI)

This program focused on installing distributed resources (DR) systems at customer sites, then performing a series of tests based on a selected protocol. Tests included evaluation of heat rate, air and noise emissions, power quality, and an economic analysis for each DR technology in the program.

2001-11-30T23:59:59.000Z

290

The Voice of Our Customers Student Fiscal Services  

E-Print Network (OSTI)

Cashier Lobby (88%) and via Catalyst On-Line (12%) · Available for 37 Days with 1,043 customer responses: Appreciate the service, quick, accessible and easy to use · Communication: Convenient Live Chat, helpful improvements may be possible in the back-end process. · Payment Processing: SFS works closely with contracted

Kaminsky, Werner

291

Linux on FPGA platforms: control software to connect custom peripherals  

Science Conference Proceedings (OSTI)

Accessing custom hardware peripherals from a soft-CPU realized on FPGA fabric is a common task. We use a Virtex-5 FPGA with a MicroBlaze soft-CPU running a standard Linux kernel as the core of our embedded system. In order to enable processes on the ...

Moritz Kretz; Andreas Kugel

2012-06-01T23:59:59.000Z

292

Customized geospatial workflows for e-government services  

Science Conference Proceedings (OSTI)

The past decade has experienced a phenomenal growth in the electronic delivery of business services. This has led to an elevation in the expectations of citizens for fast and efficient delivery of governmental services. Recently, workflow systems have ... Keywords: customization, decision support, e-government services, geospatial workflow

Richard D. Holowczak; Soon Ae Chun; Francisco J. Artigas; Vijayalakshmi Atluri

2001-11-01T23:59:59.000Z

293

Customizing your Google Scholar Settings University of Saskatchewan Library  

E-Print Network (OSTI)

Customizing your Google Scholar Settings University of Saskatchewan Library Enabling FindIt!/SFX in Google ScholarTM To enable FindIt!, the Library's OpenURL linking service, in Google ScholarTM on your personal computer: 1. Start at the Google ScholarTM homepage at http://scholar.google.ca/ 2. Select

Peak, Derek

294

Two-way data communication between utility and customer  

SciTech Connect

Distribution automation is the remote control of the distribution network that carries power from local substations to customer meters. The system, which seems to be feasible for the near future, provides two-way communication between utility and customer; not only must the utility operator be able to issue commands to automated equipment but the customer's meter must be able to answer the controller, reporting status and relaying data. Although there are other available, three types of communication systems are being investigated at present as the most feasible: power line carrier, telephone, and radio. Each system has its own special capabilities and limitations. Hybrid systems (two or more different communication systems) are also a possibility. Besides fault location and service restoration, distribution automation could facilitate time-of-day metering, load control, voltage control, and even meter reading. Most aspects of this two-way communication are accepted as beneficial by the customer; load control, however, which could selectively interfere with major appliances like water heaters, air conditioners, etc., during peak demand by selectively switching them off to level peak loads, might not be so readily acceptable. (SAC)

Lihach, N.; Blair, W.

1980-05-01T23:59:59.000Z

295

Dynamic pricing for residential electric customers: a ratepayer advocate's perspective  

SciTech Connect

New Jersey's Rate Counsel urges that the consideration of alternative pricing mechanisms aimed at encouraging a reduction or shift in residential electricity usage include recognition of the needs and wishes of consumers. Without consumer buy-in, any such pricing mechanisms will fail. To achieve the desired goals, customers must be able to understand and react to the pricing signals. (author)

Brand, Stefanie A.

2010-07-15T23:59:59.000Z

296

Local network distribution practices -- a walk from MDF to customer  

Science Conference Proceedings (OSTI)

This paper explores the various components that make up the local network from the MDF in the local exchange to the customer. The dominant distribution media in the local network is copper and this will continue to hold its position as a simple and reliable ...

D. I. Monro; D. S. Butler; S. Worger

2007-07-01T23:59:59.000Z

297

Table 15. Metallurgical Coal Exports by Customs District  

U.S. Energy Information Administration (EIA) Indexed Site

Metallurgical Coal Exports by Customs District Metallurgical Coal Exports by Customs District (short tons) U.S. Energy Information Administration | Quarterly Coal Report, April - June 2013 Table 15. Metallurgical Coal Exports by Customs District (short tons) U.S. Energy Information Administration | Quarterly Coal Report, April - June 2013 Year to Date Customs District April - June 2013 January - March 2013 April - June 2012 2013 2012 Percent Change Eastern Total 11,716,074 14,136,513 15,167,377 25,852,587 27,578,514 -6.3 Baltimore, MD 2,736,470 4,225,450 5,123,600 6,961,920 9,037,970 -23.0 Boston, MA - - - - 28,873 - Buffalo, NY 247,714 121,347 524,040 369,061 725,698 -49.1 Norfolk, VA 8,730,257 9,784,866 9,519,119 18,515,123 17,784,479 4.1 Ogdensburg, NY 1,633 4,850 618 6,483 1,494 333.9 Southern Total 3,551,564 3,824,484

298

Using Active Customer Participation in Managing Distribution Systems  

E-Print Network (OSTI)

#12;Smart Grid Distribution Advancement Introduction 3 #12;Smart Grid What would be new in smart grid1 Data Request Consumer Privacy Regulatory Requirements 15 #12;Distribution Operation Examples 16 #12Using Active Customer Participation in Managing Distribution Systems Visvakumar Aravinthan

Van Veen, Barry D.

299

The Impact of Rate Design and Net Metering on the Bill Savings from Distributed PV for Residential Customers in California  

Science Conference Proceedings (OSTI)

Net metering has become a widespread mechanism in the U.S. for supporting customer adoption of distributed photovoltaics (PV), but has faced challenges as PV installations grow to a larger share of generation in a number of states. This paper examines the value of the bill savings that customers receive under net metering, and the associated role of retail rate design, based on a sample of approximately two hundred residential customers of California's two largest electric utilities. We find that the bill savings per kWh of PV electricity generated varies by more than a factor of four across the customers in the sample, which is largely attributable to the inclining block structure of the utilities' residential retail rates. We also compare the bill savings under net metering to that received under three potential alternative compensation mechanisms, based on California's Market Price Referent (MPR). We find that net metering provides significantly greater bill savings than a full MPR-based feed-in tariff, but only modestly greater savings than alternative mechanisms under which hourly or monthly net excess generation is compensated at the MPR rate.

Energy and Resources Group, University of California, Berkeley; Darghouth, Naim R.; Barbose, Galen; Wiser, Ryan

2011-06-01T23:59:59.000Z

300

Unbundling the retail gas market: Current activities and guidance for serving residential and small customers  

Science Conference Proceedings (OSTI)

The restructuring of retail gas services has followed a typical pattern for previously heavily regulated industries: large customers are initially given rights to purchase unbundled services from different entities, with the same rights dispersed over time to smaller customers. For about ten years now industrial customers in most states have been able to {open_quotes}play the market{close_quotes}. Since the passage of the Federal Energy Regulatory Commission (FERC) Order 636 in 1992, interest has centered on expanding service unbundling to small retail customers, including residential customers. Importantly, the Order prohibited pipelines from providing bundled sales service. This is not surprising - in the telecommunications industry, for example, the unbundling of wholesale services was a strong stimulant for developing competition in the local exchange market. The push for small-customer service unbundling has derived from the basic but politically attractive idea that all retail customers should directly benefit from competitive forces in the natural gas industry. When one looks at the movement of prices since 1985, it is easy to see that large retail customers have enjoyed more favorable prices than other retail customers. For example, over the period 1985 to 1994 gas prices to industrial customers and electric utilities fell around 23 percent and 36 percent, respectively. In comparison, gas prices to residential customers increased by around 5 percent while gas prices to commercial customers decreased slightly by about 1 percent. This report examines various aspects of unbundling to small retail gas customers, with special emphasis on residential customers.

Costello, K.W.; Lemon, J.R.

1996-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "ole potential customers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Distributed energy resources in practice: A case study analysis and validation of LBNL's customer adoption model  

SciTech Connect

This report describes a Berkeley Lab effort to model the economics and operation of small-scale (<500 kW) on-site electricity generators based on real-world installations at several example customer sites. This work builds upon the previous development of the Distributed Energy Resource Customer Adoption Model (DER-CAM), a tool designed to find the optimal combination of installed equipment, and idealized operating schedule, that would minimize the site's energy bills, given performance and cost data on available DER technologies, utility tariffs, and site electrical and thermal loads over a historic test period, usually a recent year. This study offered the first opportunity to apply DER-CAM in a real-world setting and evaluate its modeling results. DER-CAM has three possible applications: first, it can be used to guide choices of equipment at specific sites, or provide general solutions for example sites and propose good choices for sites with similar circumstances; second, it can additionally provide the basis for the operations of installed on-site generation; and third, it can be used to assess the market potential of technologies by anticipating which kinds of customers might find various technologies attractive. A list of approximately 90 DER candidate sites was compiled and each site's DER characteristics and their willingness to volunteer information was assessed, producing detailed information on about 15 sites of which five sites were analyzed in depth. The five sites were not intended to provide a random sample, rather they were chosen to provide some diversity of business activity, geography, and technology. More importantly, they were chosen in the hope of finding examples of true business decisions made based on somewhat sophisticated analyses, and pilot or demonstration projects were avoided. Information on the benefits and pitfalls of implementing a DER system was also presented from an additional ten sites including agriculture, education, health care, airport, and manufacturing facilities.

Bailey, Owen; Creighton, Charles; Firestone, Ryan; Marnay, Chris; Stadler, Michael

2003-02-01T23:59:59.000Z

302

Custom Reporting: Full List of Available Information and Metrics  

NLE Websites -- All DOE Office Websites (Extended Search)

Custom Reporting: Custom Reporting: Full List of Available Information and Metrics Cost Performance Metrics Units Energy Cost Dollars Energy Cost Intensity Dollars National Median Energy Cost Dollars Total Water Cost (All Water Types) Dollars Indoor Water Cost (All Water Types) Dollars Indoor Water Cost Intensity (All Water Types) Dollars/ft2 Outdoor Water Cost (All Water Types) Dollars Investment in Energy Projects, Cumulatve Dollars Investment in Energy Projects, Cumulatve Dollars/ft2 Water/Wastewater Investment in Energy Projects, Cumulative Dollars/GPD Estimated Savings from Energy Projects, Cumulative Dollars Estimated Savings from Energy Projects, Cumulative Dollars/ft2 Water/Wastewater Estimated Savings from Energy Projects, Cumulative Dollars/GPD Electricity (Grid Purchase) Cost Dollars

303

title Automated Price and Demand Response Demonstration for Large Customers  

NLE Websites -- All DOE Office Websites (Extended Search)

Automated Price and Demand Response Demonstration for Large Customers Automated Price and Demand Response Demonstration for Large Customers in New York City using OpenADR booktitle International Conference for Enhanced Building Operations ICEBO year month address Montreal Quebec abstract p class p1 Open Automated Demand Response OpenADR an XML based information exchange model is used to facilitate continuous price responsive operation and demand response participation for large commercial buildings in New York who are subject to the default day ahead hourly pricing We summarize the existing demand response programs in New York and discuss OpenADR communication prioritization of demand response signals and control methods Building energy simulation models are developed and field tests are conducted to evaluate continuous energy management

304

Modesto Irrigation District - Custom Commercial Energy Efficiency Rebate  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

You are here You are here Home » Modesto Irrigation District - Custom Commercial Energy Efficiency Rebate Program Modesto Irrigation District - Custom Commercial Energy Efficiency Rebate Program < Back Eligibility Agricultural Commercial Industrial Savings Category Home Weatherization Commercial Weatherization Heating & Cooling Commercial Heating & Cooling Cooling Other Heat Pumps Appliances & Electronics Commercial Lighting Lighting Maximum Rebate Rebate caps are adjusted according to MID's electric rate schedule they vary from $15,000 - $500,000. Exemptions from rebate caps can be requested. Program Info State California Program Type Utility Rebate Program Rebate Amount Lighting Measures: $250/kW reduced or $.04/kWh reduced Insulation Measures: $250/kW reduced or $.04/kWh reduced

305

Exploring Customer Segmentation for Utility Energy Efficiency Programs  

Science Conference Proceedings (OSTI)

Customer segmentation is a method of identifying homogeneous groups of consumers within a greater population based on common purchasing patterns and behavioral traits. This Technical Update, prepared as part of the EPRI Energy Efficiency Initiative, examines strategies and methodologies for segmentation both in the utility sector and other industries. The reports primary goals are to: (1) Examine the strengths and challenges of previous segmentation approaches developed by EPRI, (2) Understand the segmen...

2008-05-26T23:59:59.000Z

306

Residential Information Technologies and Energy Management: A Customer's Perspective  

Science Conference Proceedings (OSTI)

From telecommuting to on-line banking or Internet shopping, information technologies are changing the lives of U.S. citizens. Will this trend extend to the energy industry? The question remains open, but EPRI is making progress in finding actionable answers. This report yields insights regarding residential customer interests in home appliance management devices, including a discussion of needs, values and attitudes regarding features and pricing.

1997-12-22T23:59:59.000Z

307

Estimating Demand Response Market Potential Among Large Commercial and Industrial Customers: A Scoping Study  

E-Print Network (OSTI)

of Program Participation Rates on Demand Response MarketTable 3-1. Methods of Estimating Demand Response PenetrationDemand Response

Goldman, Charles; Hopper, Nicole; Bharvirkar, Ranjit; Neenan, Bernie; Cappers, Peter

2007-01-01T23:59:59.000Z

308

A Methodology for Estimating Large-Customer Demand Response Market Potential  

E-Print Network (OSTI)

to Southern California Edison Company and Working Group 2December 30. Southern California Edison (SCE), 2003. “Southern California Edison Company’s Long-Term Resource Plan

Goldman, Charles; Hopper, Nicole; Bharvirkar, Ranjit; Neenan, Bernie; Cappers, Peter

2008-01-01T23:59:59.000Z

309

Estimating Demand Response Market Potential Among Large Commercial and Industrial Customers: A Scoping Study  

E-Print Network (OSTI)

energy commodity risk (e.g. gas markets) • Attendance at training workshops • Technical audits or information •information and improved methods that would support more reliable demand response market assessments. Energy

Goldman, Charles; Hopper, Nicole; Bharvirkar, Ranjit; Neenan, Bernie; Cappers, Peter

2007-01-01T23:59:59.000Z

310

A Methodology for Estimating Large-Customer Demand Response Market Potential  

E-Print Network (OSTI)

and 2005) ISO-NE Real-Time Price Response (RTPR) ProgramResponse to Real Time Electricity Prices”, December,occur in near-real time (system emergencies or energy price

Goldman, Charles; Hopper, Nicole; Bharvirkar, Ranjit; Neenan, Bernie; Cappers, Peter

2008-01-01T23:59:59.000Z

311

Estimating Demand Response Market Potential Among Large Commercial and Industrial Customers: A Scoping Study  

E-Print Network (OSTI)

Response to Electricity Real-Time Prices: Short Run and Long2005). ISO-New England Real-time Price Response Program Weevaluations of the ISO-NE Real-Time Price Response (RTPR)

Goldman, Charles; Hopper, Nicole; Bharvirkar, Ranjit; Neenan, Bernie; Cappers, Peter

2007-01-01T23:59:59.000Z

312

Estimating Demand Response Market Potential Among Large Commercial and Industrial Customers: A Scoping Study  

E-Print Network (OSTI)

response as: changes in electric usage by end-use customerselectric competition Typical rate design includes demand and/or volumetric distribution charges, with all commodity usage

Goldman, Charles; Hopper, Nicole; Bharvirkar, Ranjit; Neenan, Bernie; Cappers, Peter

2007-01-01T23:59:59.000Z

313

Cautionary aphorisms for customer-oriented system development  

Science Conference Proceedings (OSTI)

Of the three substantive two-word clusters in the title of this note the least important is system development. Although people who attend conferences like this may be interested in system development, few other people are. Customers, in particular, are much more interested in system use, system availability, and system effectiveness, than in system development. Because it is the customers who keep one in business, it therefore behooves one to develop some techniques to keep use, availability, and effectiveness in mind--in other words, to develop a customer orientation. This note illustrates one such technique: the distillation of applicable wisdom concerning people, systems, and the relationships between them into statements made memorable by their wit, brevity, and pungency. In this session the author hopes to start one on the way to one`s own collection of useful thoughts. It should be noted that the preparation of such a collection serves as a working demonstration of the value of re-use as a productivity principle: few of these statements are original with him, and many had origins in other applications. He considers in turn methodology and procedure, design, schedules, measurement, documentation, and quality.

Stevens, D.F. [Lawrence Berkeley Lab., CA (United States). Information and Computing Sciences Div.

1994-10-01T23:59:59.000Z

314

Utilities offer photovoltaic systems to remote residential customers  

SciTech Connect

From Idaho to Arizona and Nevada to Colorado, utilities across the U.S. are beginning to offer remote homeowners an option that may seem unusual today, but might be commonplace in the future. Would-be customers who do not live close to the electric grid may choose the option of photovoltaic (PV) systems to supply their electricity as an alternative to expensive line extension. These customers typically live and/or farm in rural sections of the country. Others own vacation homes far from towns or cities. Solar-powered energy systems have already proven successful for powering pumps to water livestock, and for lights and communications devices in locations far from established sources of electricity. Rather than receiving the customary electric bill for metered service, customers will pay a set rate to use the PV system, which the utility will own and maintain. The initial cost of purchasing the system can be much lower than extending the utility line (which can cost $20,000 a mile). From the utility's standpoint, it saves on investing in lines that stand to generate small profits because of the small load and resultant energy sales.

Van Arsdall, A.

1993-01-01T23:59:59.000Z

315

MDAbench: A Tool for Customized Benchmark Generation Using MDA  

E-Print Network (OSTI)

Designing component-based application that meets performance requirements remains a challenging problem, and usually requires a prototype to be constructed to benchmark performance. Building a custom benchmark suite is however costly and tedious. This demonstration illustrates an approach for generating customized component-based benchmark applications using a Model Driven Architecture (MDA) approach. All the platform related plumbing and basic performance testing routines are encapsulated in MDA generation "cartridges" along with default implementations of testing logic. We will show how to use a tailored version of the UML 2.0 Testing Profile to model a customized load testing client. The performance configuration (such as transaction mix and spiking simulations) can also be modeled using the UML model. Executing the generated deployable code will collect the performance testing data automatically. The tool implementation is based on a widely used open source MDA framework AndroMDA. We extended it by providing a cartridge for a performance testing tailored version of the UML 2.0 Testing Profile. Essentially, we use OObased meta-modeling in designing and implementing a lightweight performance testing domain specific language with supporting infrastructure on top of the existing UML testing standard.

Liming Zhu; Yan Liu; Ian Gorton; Ngoc Bao Bui

2005-01-01T23:59:59.000Z

316

Towards a first ontology for Customer Relationship Management  

E-Print Network (OSTI)

This paper presents some results of an ongoing project aimed at modeling the main concepts related to Customer Relationship Management (CRM). More precisely, the paper presents O-CREAM, a CRM ontology based on DOLCE and on two DOLCE-based modules, DnS (exploited for modeling roles and for handling reification) and OIO (exploited for modeling business knowledge by means of information objects). The project relies on the belief that all the actors involved in CRM could benefit from an ontological investigation of this field, aimed at providing a core set of formally described concepts and relations, useful both for describing CRM processes and for specifying the functionality of CRM applications. In particular, a well-formed CRM ontology would support communication and interoperability both in intra-organization and in interorganization CRM processes. The paper discusses in details the axiomatization for the sale and customer relationship concepts, as well as for the corresponding business knowledge items (i.e., sale and customer records). It concludes by sketching a possible concrete exploitation of O-CREAM.

Diego Magro

2008-01-01T23:59:59.000Z

317

enHancing custoMs coLLaBoration TO  

E-Print Network (OSTI)

Development (DIFD), Mr. Flip van Helden, European Commission, and Mr. Hui Fu, World Customs Organisation (WCO on the initiatives of the Asia Forest Partnership and East Asia and Pacific FLEG to promote cooperation among Customs

318

Considering the customer : determinants and impact of using technology on industry evolution  

E-Print Network (OSTI)

This dissertation raises two questions: How do customers come to understand and use a technology? What is the influence of customers using a technology on industry evolution and competition? I use two historical cases to ...

Kahl, Steven J. (Steven John)

2007-01-01T23:59:59.000Z

319

Customer Strategies for Responding to Day-Ahead Market Hourly Electricity Pricing  

E-Print Network (OSTI)

they reach their maximum demand, this effect is relativelyj customers' daily % of maximum demand THI* > 85 degrees on3A customers’ summer maximum demands range from about 2 MW

2005-01-01T23:59:59.000Z

320

Creating supply chain visibility : a case study on extending Intel's Unit Level Traceability to customers  

E-Print Network (OSTI)

In an effort to enable supply chain visibility for Intel products, the Customer Unit Level Traceability (ULT) Program was formed to help extend Intel's ULT capability to the customer level. Increased traceability of Intel ...

Kang, Annie

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ole potential customers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Independent review of estimated load reductions for PJM's small customer load response pilot project  

E-Print Network (OSTI)

of Estimated Load Reductions for PJM’s Small Customer Loadof Estimated Load Reductions for PJM’s Small Customer LoadResponse Pilot Project Prepared for PJM Interconnection, LLC

Heffner, G.; Moezzi, M.; Goldman, C.

2004-01-01T23:59:59.000Z

322

Managing configuration options for build-to-order highly customized products with application to specialty vehicles  

E-Print Network (OSTI)

In the past decades there has been a shift in customer expectations that has had a significant effect in the business models of manufacturing companies. Customer requirements have shifted from accepting standardized products ...

Amador Gallardo, Jorge Enrique

2010-01-01T23:59:59.000Z

323

Wealth Transfers Among Large Customers from Implementing Real-Time Retail Electricity Pricing  

E-Print Network (OSTI)

I calculate the electricity bills for each of the 1142arrangements on the customer’s electricity bill. On averageless than half of the electricity bill, so the proportional

Borenstein, Severin

2007-01-01T23:59:59.000Z

324

Modeling of customer adoption of distributed energy resources  

SciTech Connect

This report describes work completed for the California Energy Commission (CEC) on the continued development and application of the Distributed Energy Resources Customer Adoption Model (DER-CAM). This work was performed at Ernest Orlando Lawrence Berkeley National Laboratory (Berkeley Lab) between July 2000 and June 2001 under the Consortium for Electric Reliability Technology Solutions (CERTS) Distributed Energy Resources Integration (DERI) project. Our research on distributed energy resources (DER) builds on the concept of the microgrid ({mu}Grid), a semiautonomous grouping of electricity-generating sources and end-use sinks that are placed and operated for the benefit of its members. Although a {mu}Grid can operate independent of the macrogrid (the utility power network), the {mu}Grid is usually interconnected, purchasing energy and ancillary services from the macrogrid. Groups of customers can be aggregated into {mu}Grids by pooling their electrical and other loads, and the most cost-effective combination of generation resources for a particular {mu}Grid can be found. In this study, DER-CAM, an economic model of customer DER adoption implemented in the General Algebraic Modeling System (GAMS) optimization software is used, to find the cost-minimizing combination of on-site generation customers (individual businesses and a {mu}Grid) in a specified test year. DER-CAM's objective is to minimize the cost of supplying electricity to a specific customer by optimizing the installation of distributed generation and the self-generation of part or all of its electricity. Currently, the model only considers electrical loads, but combined heat and power (CHP) analysis capability is being developed under the second year of CEC funding. The key accomplishments of this year's work were the acquisition of increasingly accurate data on DER technologies, including the development of methods for forecasting cost reductions for these technologies, and the creation of a credible example California {mu}Grid for use in this study and in future work. The work performed during this year demonstrates the viability of DER-CAM and of our approach to analyzing adoption of DER.

Marnay, Chris; Chard, Joseph S.; Hamachi, Kristina S.; Lipman, Timothy; Moezzi, Mithra M.; Ouaglal, Boubekeur; Siddiqui, Afzal S.

2001-08-01T23:59:59.000Z

325

Modeling of customer adoption of distributed energy resources  

SciTech Connect

This report describes work completed for the California Energy Commission (CEC) on the continued development and application of the Distributed Energy Resources Customer Adoption Model (DER-CAM). This work was performed at Ernest Orlando Lawrence Berkeley National Laboratory (Berkeley Lab) between July 2000 and June 2001 under the Consortium for Electric Reliability Technology Solutions (CERTS) Distributed Energy Resources Integration (DERI) project. Our research on distributed energy resources (DER) builds on the concept of the microgrid ({mu}Grid), a semiautonomous grouping of electricity-generating sources and end-use sinks that are placed and operated for the benefit of its members. Although a {mu}Grid can operate independent of the macrogrid (the utility power network), the {mu}Grid is usually interconnected, purchasing energy and ancillary services from the macrogrid. Groups of customers can be aggregated into {mu}Grids by pooling their electrical and other loads, and the most cost-effective combination of generation resources for a particular {mu}Grid can be found. In this study, DER-CAM, an economic model of customer DER adoption implemented in the General Algebraic Modeling System (GAMS) optimization software is used, to find the cost-minimizing combination of on-site generation customers (individual businesses and a {mu}Grid) in a specified test year. DER-CAM's objective is to minimize the cost of supplying electricity to a specific customer by optimizing the installation of distributed generation and the self-generation of part or all of its electricity. Currently, the model only considers electrical loads, but combined heat and power (CHP) analysis capability is being developed under the second year of CEC funding. The key accomplishments of this year's work were the acquisition of increasingly accurate data on DER technologies, including the development of methods for forecasting cost reductions for these technologies, and the creation of a credible example California {mu}Grid for use in this study and in future work. The work performed during this year demonstrates the viability of DER-CAM and of our approach to analyzing adoption of DER.

Marnay, Chris; Chard, Joseph S.; Hamachi, Kristina S.; Lipman, Timothy; Moezzi, Mithra M.; Ouaglal, Boubekeur; Siddiqui, Afzal S.

2001-08-01T23:59:59.000Z

326

CLASSIFY-Profiles: Volume 2: Commercial and Industrial Customer Needs and Energy Decision Making  

Science Conference Proceedings (OSTI)

EPRI's CLASSIFY System provides utilities with the information, methods, and tools required to develop customer-driven products and services. Such customer-responsive offerings are crucial to achieving competitive success and high levels of customer satisfaction and loyalty. The Commercial and Industrial CLASSIFY-Profiles identify nine target markets, defined by 22 key customer needs related to business strategies, business operations, and energy operations. This report is available only to funders of Pr...

1995-06-22T23:59:59.000Z

327

A design decision-making support model for customized product color combination  

Science Conference Proceedings (OSTI)

The need for product customization during product development processes will continue to increase. Product customization can satisfy consumer needs and preferences. Altering the colors and appearance of module parts is an effectual method of achieving ... Keywords: Color combination, Customization, Decision-making, Fuzzy analytic hierarchy process (FAHP), Image compositing

Min-Yuan Ma; Cheih-Ying Chen; Fong-Gong Wu

2007-08-01T23:59:59.000Z

328

Resuscitating privacy-preserving mobile payment with customer in complete control  

Science Conference Proceedings (OSTI)

Credit/debit card payment transactions do not protect the privacy of the customer. Once the card is handed over to the merchant for payment processing, customers are "no longer in control" on how their card details and money are handled. This leads to ... Keywords: Customer centric payment model, Near field communication (NFC), Privacy, RFID, Secure mobile payment, Smartphone application

Divyan Munirathnam Konidala; Made Harta Dwijaksara; Kwangjo Kim; Dongman Lee; Byoungcheon Lee; Daeyoung Kim; Soontae Kim

2012-08-01T23:59:59.000Z

329

Customs Invoice (Fill in, photocopy, and insert 3 copies in sleeve of consignment)  

E-Print Network (OSTI)

the vast number of customer interfaces companies have to manage ­ multiple channels, front-line employees on establishing strong bases of loyal, profitable customers who are also advocates for the company. To drive companies historically haven't been good at addressing. The customer experience is more than an analysis

Wang, Yan

330

Using a change-management approach to promote customer-centered design  

Science Conference Proceedings (OSTI)

Future business success is strongly linked to establishing and sustaining a superior customer experience. Through an internal company wide initiative called ìTotal Customer Experience,î Hewlett-Packard (HP) has focused on the delivery of ... Keywords: business case, change-management, customer experience, experience design, organizational change, organizational culture, process improvement, product design, tape drive, user experience, user-centered design

Stephen Sato; Andrew Panton

2003-06-01T23:59:59.000Z

331

Distributed Resources in the Commercial Sector: Customer Needs and Adoption Experiences  

Science Conference Proceedings (OSTI)

During the last five years, an increasing number of commercial customers have installed distributed resources (DR) solutions at their facilities. This study sheds light on the DR adoption experience of commercial customers, enabling EPRI members to better target attractive commercial segments and assist in customer implementation of DR solutions.

2001-11-19T23:59:59.000Z

332

Customization for games: lessons from variants of texas hold'em  

Science Conference Proceedings (OSTI)

System designers who build customization into games ought to consider how players think about adjustments. The distinctiveness of gaming contexts suggests that closer inspection of customization in games is warranted and will inform the design of customizable ... Keywords: customization, end-user programming, game design, game studies, variation

Gifford K. Cheung

2011-05-01T23:59:59.000Z

333

Molten Salt Test Loop (MSTL) system customer interface document.  

SciTech Connect

The National Solar Thermal Test Facility at Sandia National Laboratories has a unique test capability called the Molten Salt Test Loop (MSTL) system. MSTL is a test capability that allows customers and researchers to test components in flowing, molten nitrate salt. The components tested can range from materials samples, to individual components such as flex hoses, ball joints, and valves, up to full solar collecting systems such as central receiver panels, parabolic troughs, or linear Fresnel systems. MSTL provides realistic conditions similar to a portion of a concentrating solar power facility. The facility currently uses 60/40 nitrate %E2%80%9Csolar salt%E2%80%9D and can circulate the salt at pressure up to 40 bar (600psi), temperature to 585%C2%B0C, and flow rate of 44-50kg/s(400-600GPM) depending on temperature. The purpose of this document is to provide a basis for customers to evaluate the applicability to their testing needs, and to provide an outline of expectations for conducting testing on MSTL. The document can serve as the basis for testing agreements including Work for Others (WFO) and Cooperative Research and Development Agreements (CRADA). While this document provides the basis for these agreements and describes some of the requirements for testing using MSTL and on the site at Sandia, the document is not sufficient by itself as a test agreement. The document, however, does provide customers with a uniform set of information to begin the test planning process.

Gill, David Dennis; Kolb, William J.; Briggs, Ronald D.

2013-09-01T23:59:59.000Z

334

Construction of a stationary FIFO queue with impatient customers  

E-Print Network (OSTI)

In this paper, we study the stability of queues with impatient customers. Under general stationary ergodic assumptions, we first provide some conditions for such a queue to be regenerative (i.e. to empty a.s. an infinite number of times). In the particular case of a single server operating in First in, First out, we prove the existence (in some cases, on an enlarged probability space) of a stationary workload. This is done by studying stochastic recursions under the Palm settings, and by stochastic comparison of stochastic recursions.

Moyal, Pascal

2008-01-01T23:59:59.000Z

335

Construction of a stationary queue with impatient customers  

E-Print Network (OSTI)

In this paper, we study the stability of queues with impatient customers. Under general stationary ergodic assumptions, we first provide some conditions for such a queue to be regenerative (i.e. to empty a.s. an infinite number of times). In the particular case of a single server operating in First in, First out, we prove the existence (in some cases, on an enlarged probability space) of a stationary workload. This is done by studying a non-monotonic stochastic recursion under the Palm settings, and by stochastic comparison of stochastic recursions.

Moyal, Pascal

2007-01-01T23:59:59.000Z

336

Customer reponse to day-ahead wholesale market electricity prices: Case study of RTP program experience in New York  

E-Print Network (OSTI)

of Niagara Mohawk’s Large Customers (Peak Demand >large customers with peak demand in excess of two megawattsmonthly peak and off- peak demand blocks (at 100% load

2004-01-01T23:59:59.000Z

337

PowerChoice Residential Customer Response to TOU Rates  

Science Conference Proceedings (OSTI)

Research Into Action, Inc. and the Sacramento Municipal Utility District (SMUD) worked together to conduct research on the behaviors and energy use patterns of SMUD residential customers who voluntarily signed on to a Time-of-Use rate pilot launched under the PowerChoice label. The project was designed to consider the how and why of residential customers ability and willingness to engage in demand reduction behaviors, and to link social and behavioral factors to observed changes in demand. The research drew on a combination of load interval data and three successive surveys of participating households. Two experimental treatments were applied to test the effects of increased information on households ability to respond to the Time-of-Use rates. Survey results indicated that participants understood the purpose of the Time-of-Use rate and undertook substantial appropriate actions to shift load and conserve. Statistical tests revealed minor initial price effects and more marked, but still modest, adjustments to seasonal rate changes. Tests of the two information interventions indicated that neither made much difference to consumption patterns. Despite the lackluster statistical evidence for load shifting, the analysis points to key issues for critical analysis and development of residential Time-of-Use rates, especially pertinent as California sets the stage for demand response in more California residences.

Peters, Jane S.; Moezzi, Mithra; Lutzenhiser, Susan; Woods, James; Dethman, Linda; Kunkle, Rick

2009-10-01T23:59:59.000Z

338

VISMASHUP: streamlining the creation of custom visualization applications  

SciTech Connect

Visualization is essential for understanding the increasing volumes of digital data. However, the process required to create insightful visualizations is involved and time consuming. Although several visualization tools are available, including tools with sophisticated visual interfaces, they are out of reach for users who have little or no knowledge of visualization techniques and/or who do not have programming expertise. In this paper, we propose VISMASHUP, a new framework for streamlining the creation of customized visualization applications. Because these applications can be customized for very specific tasks, they can hide much of the complexity in a visualization specification and make it easier for users to explore visualizations by manipulating a small set of parameters. We describe the framework and how it supports the various tasks a designer needs to carry out to develop an application, from mining and exploring a set of visualization specifications (pipelines), to the creation of simplified views of the pipelines, and the automatic generation of the application and its interface. We also describe the implementation of the system and demonstrate its use in two real application scenarios.

Ahrens, James P [Los Alamos National Laboratory; Santos, Emanuele [UNIV OF UTAH; Lins, Lauro [UNIV OF UTAH; Freire, Juliana [UNIV OF UTAH; Silva, Cl' audio T [UNIV OF UTAH

2010-01-01T23:59:59.000Z

339

Monitoring and Determination of Wind Energy Potential by Web Based Wireless Network  

Science Conference Proceedings (OSTI)

In this paper, we develop a web based interface which performs a wireless communication with ZigBee protocol for monitoring wind energy potential and also gathering custom reports for determination of the interested wind field. A custom printed circuit ... Keywords: wind energy, wireless network, web based control

Onur Keskin; ISmet Ates; Ziya Haktan Karadeniz; Alpaslan Turgut; Zeki KiRal

2012-12-01T23:59:59.000Z

340

The Impact of Retail Rate Structures on the Economics of Customer-Sited PV: A Study of Commercial Installations in California  

E-Print Network (OSTI)

the measure of maximum demand used and the variation in theon the customer’s maximum demand over the past 12-monthon the customer’s maximum demand during each monthly billing

Wiser, Ryan; Mills, Andrew; Barbose, Galen; Golove, William

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ole potential customers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Energy Efficiency and Renewable Energy Network (EREN): Customer satisfaction survey  

Science Conference Proceedings (OSTI)

The Energy Efficiency and Renewable Energy Network (EREN) Customer Satisfaction Survey was developed and executed in support of EREN`s continuous quality improvement (CQI) plan. The study was designed to provide information about the demographic make up of EREN users, the value or benefits they derive from EREN, the kinds and quality of services they want, their levels of satisfaction with existing services, their preferences in both the sources of service and the means of delivery, and to provide benchmark data for the establishment of continuous quality improvement measures. The survey was performed by soliciting voluntary participation from members of the EREN Users Group. It was executed in two phases; the first being conducted by phone using a randomly selected group; and the second being conducted electronically and which was open to all of the remaining members of the Users Group. The survey results are described.

Anderson, A.V. [Information International Associates, Inc., Oak Ridge, TN (United States); Henderson, D.P. [Dept. of Energy, Oak Ridge, TN (United States). Office of Scientific and Technical Information

1996-04-22T23:59:59.000Z

342

Evaluating Offshore IT Outsourcing in India: Supplier and Customer Scenarios  

E-Print Network (OSTI)

This paper presents the findings from an ongoing research study on offshore IT outsourcing. Field work was carried out in India and in the UK to evaluate the scale and scope of outsourcing activities. CEOs and CIOs were interviewed in fifteen supplier firms in India and two customer firms in UK, about strategic positioning in the offshore outsourcing market; benefits and risks from outsourcing; and other demand and supply-side issues. The findings suggest that, though offshore outsourcing offers new business opportunities for IT suppliers, much of the outsourced work continues to be low risk and low value. The challenge for outsourcing suppliers is therefore to devise strategies to move from body-shopping work to low cost, high value contracts, without incurring additional risk. 1.

Naureen Khan; Wendy L. Currie; Vishanth Weerakkody; Bhavini Desai

2002-01-01T23:59:59.000Z

343

Public utilities supply solar energy to eager customers  

DOE Green Energy (OSTI)

This articles examines how photovoltaic power is an alternative source of energy that can help utilities earn goodwill from their customers for being innovative, saving money, and reducing harmful emissions. Planners at municipal utilities are discovering the advantages that photovoltaic (PV) power offers. In addition to the thousands of private, federal, state, and commercial PV systems installed during the last 20 years, more than 65 cities in 24 states also have installed such systems. PV power is cost effective in selected utility applications today, and those applications are expanding every year. PV can be useful in applications ranging from low-power uses to decentralized applications to large, central stations. Public utilities in Austin and Sacramento are among those successfully using PV power for all three types of applications.

NONE

1995-01-01T23:59:59.000Z

344

Rate Structures for Customers With Onsite Generation: Practice and Innovation  

DOE Green Energy (OSTI)

Recognizing that innovation and good public policy do not always proclaim themselves, Synapse Energy Economics and the Regulatory Assistance Project, under a contract with the California Energy Commission (CEC) and the National Renewable Energy Laboratory (NREL), undertook a survey of state policies on rates for partial-requirements customers with onsite distributed generation. The survey investigated a dozen or so states. These varied in geography and the structures of their electric industries. By reviewing regulatory proceedings, tariffs, publications, and interviews, the researchers identified a number of approaches to standby and associated rates--many promising but some that are perhaps not--that deserve policymakers' attention if they are to promote the deployment of cost-effective DG in their states.

Johnston, L.; Takahashi, K.; Weston, F.; Murray, C.

2005-12-01T23:59:59.000Z

345

For stricter emissions needs, try custom catalytic reduction  

Science Conference Proceedings (OSTI)

When O`Brien California Cogen Ltd. was contracted to develop a system to generate steam for an Artesia, Calif., mild producer`s evaporation process, local regulations required NO{sub x} emissions reduced 9 ppm and CO to 10 ppm. Johnson Matthey supplied the solution with a custom system combining an oxidation catalyst to control CSO emissions and a selective catalytic reduction (SCR) system to control NO{sub x}. O`Brien`s cogen operation runs off an aircraft-derivative GE Gas Turbine, model LM2500, with a 22.4-MW output. The catalyst system is installed in the exhaust stream of a heat recovery steam generator (HRSG) form the Henry Vogt Machine Co.

Chambers, A.

1995-08-01T23:59:59.000Z

346

Customer Value Proposition Smart Grid (KEL) (Smart Grid Project) | Open  

Open Energy Info (EERE)

Proposition Smart Grid (KEL) (Smart Grid Project) Proposition Smart Grid (KEL) (Smart Grid Project) Jump to: navigation, search Project Name Customer Value Proposition Smart Grid (KEL) Country Sweden Headquarters Location Gothenburg, Sweden Coordinates 57.696995°, 11.9865° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":57.696995,"lon":11.9865,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

347

Low-Interest Loans for Customer-Side Distributed Resources | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Low-Interest Loans for Customer-Side Distributed Resources Low-Interest Loans for Customer-Side Distributed Resources Low-Interest Loans for Customer-Side Distributed Resources < Back Eligibility Agricultural Commercial Fed. Government Industrial Institutional Local Government Nonprofit Residential Schools State Government Savings Category Commercial Heating & Cooling Manufacturing Buying & Making Electricity Alternative Fuel Vehicles Hydrogen & Fuel Cells Solar Wind Program Info Start Date 7/21/2005 State Connecticut Program Type State Loan Program Rebate Amount Varies Provider Banc of America Long-term financing is available to retail end-use customers for the installation of customer-side distributed resources. Customer-side distributed resources are defined by Conn. Gen. Stat. § 16-1 as "(A) the generation of electricity from a unit with a rating of not more than

348

Microsoft Word - Future Power Systems 21 - The Smart Customer.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 - The Smart Customer 1 - The Smart Customer ï›™ ï›™ ï›™ ï›™Steve Browning Page 1 of 14 May 2010 Overview From Future Power Systems (FPS) articles 18 and 19 we can see that there are a number of different trading and tariff mechanisms which can be employed on the utility to customer interface to enable participation. From article 20 we see that there will be different pricing profiles on similar day types due to changes in availability of renewable generation. The customer interface has to be carefully managed to avoid overreaction, the spectre of 'uncertainty' and major changes to energy bills. The last two conditions can cause serious adverse reactions from the customers. The main thing the customer, the industry and the community wants to see out of the Smart Enterprise is 'value'; to put together the infrastructure from two way

349

Interactions between Energy Efficiency Programs funded under the Recovery Act and Utility Customer-Funded Energy Efficiency Programs  

Science Conference Proceedings (OSTI)

Since the spring of 2009, billions of federal dollars have been allocated to state and local governments as grants for energy efficiency and renewable energy projects and programs. The scale of this American Reinvestment and Recovery Act (ARRA) funding, focused on 'shovel-ready' projects to create and retain jobs, is unprecedented. Thousands of newly funded players - cities, counties, states, and tribes - and thousands of programs and projects are entering the existing landscape of energy efficiency programs for the first time or expanding their reach. The nation's experience base with energy efficiency is growing enormously, fed by federal dollars and driven by broader objectives than saving energy alone. State and local officials made countless choices in developing portfolios of ARRA-funded energy efficiency programs and deciding how their programs would relate to existing efficiency programs funded by utility customers. Those choices are worth examining as bellwethers of a future world where there may be multiple program administrators and funding sources in many states. What are the opportunities and challenges of this new environment? What short- and long-term impacts will this large, infusion of funds have on utility customer-funded programs; for example, on infrastructure for delivering energy efficiency services or on customer willingness to invest in energy efficiency? To what extent has the attribution of energy savings been a critical issue, especially where administrators of utility customer-funded energy efficiency programs have performance or shareholder incentives? Do the new ARRA-funded energy efficiency programs provide insights on roles or activities that are particularly well-suited to state and local program administrators vs. administrators or implementers of utility customer-funded programs? The answers could have important implications for the future of U.S. energy efficiency. This report focuses on a selected set of ARRA-funded energy efficiency programs administered by state energy offices: the State Energy Program (SEP) formula grants, the portion of Energy Efficiency and Conservation Block Grant (EECBG) formula funds administered directly by states, and the State Energy Efficient Appliance Rebate Program (SEEARP). Since these ARRA programs devote significant monies to energy efficiency and serve similar markets as utility customer-funded programs, there are frequent interactions between programs. We exclude the DOE low-income weatherization program and EECBG funding awarded directly to the over 2,200 cities, counties and tribes from our study to keep its scope manageable. We summarize the energy efficiency program design and funding choices made by the 50 state energy offices, 5 territories and the District of Columbia. We then focus on the specific choices made in 12 case study states. These states were selected based on the level of utility customer program funding, diversity of program administrator models, and geographic diversity. Based on interviews with more than 80 energy efficiency actors in those 12 states, we draw observations about states strategies for use of Recovery Act funds. We examine interactions between ARRA programs and utility customer-funded energy efficiency programs in terms of program planning, program design and implementation, policy issues, and potential long-term impacts. We consider how the existing regulatory policy framework and energy efficiency programs in these 12 states may have impacted development of these selected ARRA programs. Finally, we summarize key trends and highlight issues that evaluators of these ARRA programs may want to examine in more depth in their process and impact evaluations.

Goldman, Charles A.; Stuart, Elizabeth; Hoffman, Ian; Fuller, Merrian C.; Billingsley, Megan A.

2011-02-25T23:59:59.000Z

350

The design of a semi-custom intergrated circuit for the SLAC SLC timing control system  

Science Conference Proceedings (OSTI)

A semi-custom (gate array) integrated circuit has been designed for use in the SLAC Linear Collider timing and control system. The design process and SLAC's experiences during the phases of the design cycle are described. Issues concerning the partitioning of the design into semi-custom and standard components are discussed. Functional descriptions of the semi-custom integrated circuit and the timing module in which it is used are given.

Linstadt, E.

1985-02-01T23:59:59.000Z

351

The Potential of Energy Management and Control Systems for Real-Time Electricity Pricing Programs  

E-Print Network (OSTI)

In implementing an integrated electric utility network, direct communication between the utility and customers is an important component. The rapid penetration of computer building control technology in larger commercial and industrial customers provides an opportunity for the utility to implement this network by linking directly with equipment already in place: customer-owned energy management and control systems (EMCS). This paper assesses the potential use of EMCSs in utility real-time pricing (RTP) efforts by discussing the procedures and technical requirements for transferring prices to the EMCS. The perspectives and objectives of the customer and the utility will also be discussed. We will discuss how price information can be used by the customer and the EMCS to implement demand-limiting strategies, both in currently available demand-management algorithms, and in potential price-responsive cost-management algorithms.

Akbari, H.; Heinemeier, K. E.

1990-01-01T23:59:59.000Z

352

Analysis of Customer Enrollment Patterns in TIme-Based Rate Programs...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

are implemented in conjunction with the deployment of advanced metering infrastructure (AMI) and customer systems such as in-home displays (IHDs) and programmable communicating...

353

Customer Strategies for Responding to Day-Ahead Market Hourly Electricity Pricing  

E-Print Network (OSTI)

2003). “ An Evaluation of Demand Response in New York State’was coordinated by the Demand Response Research Center and2001, “RTP Customer Demand Response – Empirical Evidence on

2005-01-01T23:59:59.000Z

354

The Economic Value of PV and Net Metering to Residential Customers in California  

E-Print Network (OSTI)

Practices in State Net Metering Policies and InterconnectionRenewable Energy). “Map of Net Metering Policies”, Net Metering to Residential Customers in

Darghouth, Naim

2010-01-01T23:59:59.000Z

355

The impact of business orientations on customer loyalty. An empirical study using a case study approach.  

E-Print Network (OSTI)

??Customer loyalty is considered to be critically important to growth, profitability and sustainability. It has received much attention by practitioner and managers. However, some important… (more)

Khan, Osman

2009-01-01T23:59:59.000Z

356

Customer Strategies for Responding to Day-Ahead Market Hourly Electricity Pricing  

E-Print Network (OSTI)

of-Use Prices and Electricity Demand: Allowing for Selectionthe theory of customer electricity demand and the specificfor in evaluating electricity demand and price response. Hot

2005-01-01T23:59:59.000Z

357

Separating financial from commercial customer churn: A modeling step towards resolving the conflict between the sales and credit department  

Science Conference Proceedings (OSTI)

In subscription services, customers who leave the company can be divided into two groups: customers who do not renew their fixed-term contract at the end of that contract, and others who just stop paying during their contract to which they are legally ... Keywords: Analytical customer relationship management (aCRM), Attrition research, Commercial churn, Credit risk, Customer churn, Customer intelligence, Financial churn, Out-of-period validation

Jonathan Burez; Dirk Van den Poel

2008-07-01T23:59:59.000Z

358

Germany's Future Energy Policy - Potential Scope and Areas of Action for  

NLE Websites -- All DOE Office Websites (Extended Search)

Germany's Future Energy Policy - Potential Scope and Areas of Action for Germany's Future Energy Policy - Potential Scope and Areas of Action for Rational Energy Use and Renewable Energies Speaker(s): Ole Langniss Date: June 24, 1996 - 12:00pm Location: 90-3148 Seminar Host/Point of Contact: Judy Jennings Energy efficiency is defined as matter of obtaining balance between the energy gained and the sacrifices necessary to bring about this gain . A building in Sweden, now in the designing stage, will be testing a new design process to reach the highest possible level of energy efficiency. (Construction to take place in 1997, and commissioning in 1998.).All major services and systems for this building will be optimized, via marginal profitability analysis, in order to give maximum contribution to the integrated energy efficiency (both electricity and heat). Energy

359

South Florida Sun-Sentinel.com Wells Fargo says South Florida customers got account  

E-Print Network (OSTI)

South Florida Sun-Sentinel.com Wells Fargo says South Florida customers got account information Wells Fargo confirmed Friday that South Floridians are among customers affected by a mistake in which at 800-ToWells or visit a branch. They will be reimbursed should losses occur in their account because

Belogay, Eugene A.

360

Targeting Products in Residential Markets: Comparing "Off-the-Shelf" and Custom Segmentation Systems  

Science Conference Proceedings (OSTI)

This report summarizes results of customer research designed to provide energy service companies that have an interest in selling value-added services with insight about selecting the best options among a variety of both "off-the-shelf" and custom segmentation tools.

2000-11-03T23:59:59.000Z

Note: This page contains sample records for the topic "ole potential customers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Offering Premium Power to Select Customer Segments: Using Distributed Resources for Distribution Utilities  

Science Conference Proceedings (OSTI)

Electric sector restructuring will likely lead to increased opportunities for distributed resources (DR) technologies and solutions. In particular, distribution utilities may be able to use DR to provide innovative services that can help increase customer value and open new sources of revenue. Using DR to offer premium power services to customers with special sensitivity to power quality disturbances is one such opportunity.

2001-01-11T23:59:59.000Z

362

Using customers data for defining retail market size: a GIS approach  

Science Conference Proceedings (OSTI)

Geographical Information Systems (GIS) systems provide a wide array of tools for site, demographic and competitive analyses which enable retailers and marketers to answer several questions that are related to retail location. The aim of this ... Keywords: GIS, Jeddah, Saudi Arabia, customer data, demographics, geocoding, geographical information systems, market analysis, marketing policy, retail centres, retail customers, retail market size, retail planning, shopping centres

Abdulkader A. Murad

2009-03-01T23:59:59.000Z

363

Mining customer knowledge to implement online shopping and home delivery for hypermarkets  

Science Conference Proceedings (OSTI)

With advances in modern technology, the Internet population has increased year by year globally. For young customers who consider convenience and speed as prerequisites, online shopping has become a new type of consumption. In addition, business-to-customer ... Keywords: Association rule, Cluster analysis, Data mining, Database marketing, Electronic commerce, Home delivery, On-line shopping

Shu-hsien Liao; Yin-ju Chen; Yi-tsun Lin

2011-04-01T23:59:59.000Z

364

Customer System 2000 Architecture and Requirements: Appendices: Distributed-Object Technology and Java Programming Language  

Science Conference Proceedings (OSTI)

Many utilities are considering electronic communications as a means of delivering highly differentiated energy products and services to their customers. The CS 2000 project provides a "designed solution" for an Internet-based electronic delivery channel capable of supporting a diversified portfolio of applications that help retain customers, enhance revenues, and increase market share.

1997-06-02T23:59:59.000Z

365

PageTailor: reusable end-user customization for the mobile web  

Science Conference Proceedings (OSTI)

Most pages on the Web are designed for the desktop environment and render poorly on the small screens available on handheld devices. We introduce Reusable End-User Customization (REUC), a technique that lets end users adapt the layout of Web pages by ... Keywords: customization, end-user, mobile web, small screen

Nilton Bila; Troy Ronda; Iqbal Mohomed; Khai N. Truong; Eyal de Lara

2007-06-01T23:59:59.000Z

366

Advanced Metering, Value-Added Services, and Communications-Based Applications for National Account Customers  

Science Conference Proceedings (OSTI)

As the electric utility industry progresses toward deregulation, many different approaches will be used by customers and energy brokers to leverage their buying power through bulk electricity purchases. This report documents interviews with national account customers to determine the advanced information, communications, and metering systems needed to deliver, monitor, and bill such purchases.

1997-04-18T23:59:59.000Z

367

The Effect on Electricity Consumption of the Commonwealth Edison Customer Application Program Pilot: Phase 1, Appendices  

Science Conference Proceedings (OSTI)

This report provides appendices that support Electric Power Research Institute (EPRI) report 1022703, which describes the Phase 1 analysis of some aspects of residential customers' response to Commonwealth Edison's Customer Application Plan (CAP). This report contains technical materials that describe in detail all of the methods employed in conducting the Phase 1 analysis and presents the results of the application of those methods.

2011-04-29T23:59:59.000Z

368

The Effect on Electricity Consumption of the Commonwealth Edison Customer Application Program: Phase 2 Supplemental Information  

Science Conference Proceedings (OSTI)

This report provides appendices that support EPRI report 1023644, which describes the Phase 2 (final) analysis of residential customers' response to Commonwealth Edison's Customer Application Program (CAP). The report contains technical materials that describe in detail the methods employed in conducting the Phase 2 analysis and presents the results of the application of additional data and methods in Phase 2.

2012-02-09T23:59:59.000Z

369

The Effect on Electricity Consumption of the Commonwealth Edison Customer Application Program Pilot: Phase 1  

Science Conference Proceedings (OSTI)

This report describes the Phase 1 analysis of some aspects of residential customers' response to Commonwealth Edison’s (ComEd) Customer Application Plan (CAP) as well as the plans to extend the analysis and evaluate additional aspects of that plan during Phase 2 of the evaluation.

2011-04-04T23:59:59.000Z

370

Pricing Electricity for Default Customers: Pass Through or Performance-Based Rates?  

E-Print Network (OSTI)

PWP-066 Pricing Electricity for Default Customers: Pass Through or Performance-Based Rates? Carl;1 Pricing Electricity for Default Customers: Pass Through or Performance-Based Rates? Carl Blumstein1 August 1999 Abstract California electricity consumers can choose a retail electricity service provider

California at Berkeley. University of

371

SDG&E Customers Can Connect Home Area Network Devices With Smart Meters |  

Open Energy Info (EERE)

SDG&E Customers Can Connect Home Area Network Devices With Smart Meters SDG&E Customers Can Connect Home Area Network Devices With Smart Meters Home > Groups > Utility Rate Graham7781's picture Submitted by Graham7781(2002) Super contributor 16 January, 2013 - 11:09 OpenEI San Diego Gas and Electric Smart Meters Smartgrid article reposted from Smartgrid.gov SAN DIEGO, Jan. 10, 2013 - San Diego Gas & Electric (SDG&E) customers can now purchase and install home area network devices to see how much energy they are using in near real-time and help identify high energy use appliances. With in-home energy display devices connected to their electric smart meters, SDG&E customers have access to a new tool to help them make smart energy consumption decisions to reduce their overall energy usage and costs. SDG&E has tested several new in-home energy display devices and customers

372

Estimated Value of Service Reliability for Electric Utility Customers in the United States  

SciTech Connect

Information on the value of reliable electricity service can be used to assess the economic efficiency of investments in generation, transmission and distribution systems, to strategically target investments to customer segments that receive the most benefit from system improvements, and to numerically quantify the risk associated with different operating, planning and investment strategies. This paper summarizes research designed to provide estimates of the value of service reliability for electricity customers in the US. These estimates were obtained by analyzing the results from 28 customer value of service reliability studies conducted by 10 major US electric utilities over the 16 year period from 1989 to 2005. Because these studies used nearly identical interruption cost estimation or willingness-to-pay/accept methods it was possible to integrate their results into a single meta-database describing the value of electric service reliability observed in all of them. Once the datasets from the various studies were combined, a two-part regression model was used to estimate customer damage functions that can be generally applied to calculate customer interruption costs per event by season, time of day, day of week, and geographical regions within the US for industrial, commercial, and residential customers. Estimated interruption costs for different types of customers and of different duration are provided. Finally, additional research and development designed to expand the usefulness of this powerful database and analysis are suggested.

Sullivan, M.J.; Mercurio, Matthew; Schellenberg, Josh

2009-06-01T23:59:59.000Z

373

Interactions between Energy Efficiency Programs funded under the Recovery Act and Utility Customer-Funded Energy Efficiency Programs  

E-Print Network (OSTI)

Program (WIP). “History of the State Energy Program. ”and history of utility customer- funded programs, institutional capacity of state energyand history of utility customer-funded programs, institutional capacity of state energy

Goldman, Charles A.

2011-01-01T23:59:59.000Z

374

Customer A arrives at a service facility with 3 servers at time t = 0 and finds all the servers are busy and 4 other customers waiting for service in the queue. The service discipline is  

E-Print Network (OSTI)

state is defined as n, the number of total customers in the queue, n = 0, 1, 2, · · · , 8. The stateQuestion 1 Customer A arrives at a service facility with 3 servers at time t = 0 and finds all the servers are busy and 4 other customers waiting for service in the queue. The service discipline is FCFS

Shihada, Basem

375

WorkExcel.com E117 If dealing with irate customers makes you want to drive home, jump  

E-Print Network (OSTI)

customers. The company keeps a number of offices in a variety of cities and locations within each city. Each a vehicle, the company records the customer name, address, phone number (with the area code). A customer is usually identified by their phone number. The company also maintains a list of the SuperRent Club members

Oliver, Douglas L.

376

Capstone Project-Design and Implementation of a Customer Driven Microgrid Satish J. Ranade and Joydeep Mitra  

E-Print Network (OSTI)

Capstone Project- Design and Implementation of a Customer Driven Microgrid Satish J. Ranade and subsystem designs that ultimately result in the construction and operation of a microgrid. Background: A microgrid customer-driven microgrid consists of small generation sources and storage installed by customers

Johnson, Eric E.

377

Real Time Pricing as a Default or Optional Service for C&I Customers: A Comparative Analysis of Eight Case Studies  

E-Print Network (OSTI)

reason for the large number of customers enrolled in RTP (in terms of the number of customers enrolled (as of somethey have a small number of customers that do respond to

Barbose, Galen; Goldman, Charles; Bharvirkar, Ranjit; Hopper, Nicole; Ting, Michael; Neenan, Bernie

2005-01-01T23:59:59.000Z

378

The Impact of Retail Rate Structures on the Economics of Customer-Sited PV: A Study of Commercial Installations in California  

E-Print Network (OSTI)

profile, and the customer load profile. We also identify therate level, customer load profile, PV production profile,shape of the customer load profile and/or PV production

Wiser, Ryan; Mills, Andrew; Barbose, Galen; Golove, William

2008-01-01T23:59:59.000Z

379

DOE GC Joins Customs Service Trade Data System to Strengthen Enforcement  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

GC Joins Customs Service Trade Data System to Strengthen GC Joins Customs Service Trade Data System to Strengthen Enforcement Effort DOE GC Joins Customs Service Trade Data System to Strengthen Enforcement Effort February 14, 2011 - 5:48pm Addthis The Department of Energy today announced that its Office of the General Counsel has joined the Board of Directors of the International Trade Data System, and now has access to the U.S. Customs and Border Protection "Automated Commercial Environment." This provides DOE with real-time information on imported products subject to DOE's energy conservation regulations. The Department will now be able more easily to identify products imported in violation of its energy conservation regulations thus ensuring that foreign manufacturers have to follow the same rules as

380

Analysis of Customer Enrollment Patterns in TIme-Based Rate Programs:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Analysis of Customer Enrollment Patterns in TIme-Based Rate Analysis of Customer Enrollment Patterns in TIme-Based Rate Programs: Initial Results from the SGIG Consumer Behavior Studies (July 2013) Analysis of Customer Enrollment Patterns in TIme-Based Rate Programs: Initial Results from the SGIG Consumer Behavior Studies (July 2013) The U.S. Department of Energy is implementing the Smart Grid Investment Grant (SGIG) program under the American Recovery and Reinvestment Act of 2009 (Recovery Act). The SGIG program involves 99 projects that are deploying smart grid technologies, tools, and techniques for electric transmission, distribution, advanced metering, and customer systems. A subset of the 99 SGIG projects is conducting consumer behavior studies. These studies examine the response of residential and small commercial

Note: This page contains sample records for the topic "ole potential customers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Dynamic or Tiered Rates? Utility or Customer-Controlled Event Automation?  

NLE Websites -- All DOE Office Websites (Extended Search)

Dynamic or Tiered Rates? Utility or Customer-Controlled Event Automation? Dynamic or Tiered Rates? Utility or Customer-Controlled Event Automation? Speaker(s): Karen Herter Date: September 27, 2013 - 12:00pm - 1:00pm Location: 90-3122 Seminar Host/Point of Contact: Janie Page SMUD's 2011-2012 Residential Summer Solutions Study investigated the effects of real-time energy data and TOU-CPP rates in the presence of utility or customer controlled thermostat automation. Of the four rate and automation options offered, the TOU-CPP rate + customer-controlled automation provided the greatest savings, with 4% energy savings, daily weekday peak savings of more than 30%, and an average event peak load shed of nearly 60%. Effects of real-time information on these impacts were modest (1-7%), but in many cases statistically significant. On average,

382

List of Custom/Others pending approval Incentives | Open Energy Information  

Open Energy Info (EERE)

Custom/Others pending approval Incentives Custom/Others pending approval Incentives Jump to: navigation, search The following contains the list of 769 Custom/Others pending approval Incentives. CSV (rows 1-500) CSV (rows 501-769) Incentive Incentive Type Place Applicable Sector Eligible Technologies Active AEP (Central and North) - CitySmart Program (Texas) Utility Rebate Program Texas Commercial Industrial Institutional Local Government Schools Boilers Central Air conditioners Chillers Comprehensive Measures/Whole Building Custom/Others pending approval Energy Mgmt. Systems/Building Controls Furnaces Heat pumps Lighting Lighting Controls/Sensors Motor VFDs Motors Roofs Windows Yes AEP (Central and North) - Residential Energy Efficiency Programs (Texas) Utility Rebate Program Texas Construction

383

Customer Equilibrium and Optimal Strategies in an M/M/1 Queue with Dynamic Service Control  

E-Print Network (OSTI)

We consider the problem of customer equilibrium strategies in an M/M/1 queue under dynamic service control. The service rate switches between a low and a high value depending on system congestion. Arriving customers do not observe the system state at the moment of arrival. We show that due to service rate variation, the customer equilibrium strategy is not generally unique, and derive an upper bound on the number of possible equilibria. For the problem of social welfare optimization, we numerically analyze the relationship between the optimal arrival rate, which maximizes the overall welfare of the customers, and the equilibrium ones as a function of various parameter values. We finally derive analytic solutions for the special case where the service rate switch occurs when the queue ceases to be empty.

Dimitrakopoulos, Y

2011-01-01T23:59:59.000Z

384

Customer Response to RTP in Competitive Markets: A Study of Niagara Mohawk's Standard Offer Tariff  

E-Print Network (OSTI)

2002). “Industrial Response to Electricity Real-Time Prices:Industrial Response To Real Time Electricity Prices. ”price elasticity of large commercial and industrial customers served under a day-ahead RTP rate to identify patterns based on whether electricity

Boisvert, Richard N.; Cappers, Peter; Goldman, Charles; Neenan, Bernie; Hopper, Nicole

2006-01-01T23:59:59.000Z

385

Residential Customer Rate Options for Electric Vehicles and Plug-In Hybrid Electric Vehicles  

Science Conference Proceedings (OSTI)

This paper summarizes results of a survey conducted in the summer of 2006 that examined residential electric rates available to Californias electric vehicle EV and plug-in hybrid electric vehicle PHEV customers.

2008-03-31T23:59:59.000Z

386

Impact of RFID technologies on helicopter processes: Assessment on customer oriented Charlotte JIMENEZa,b  

E-Print Network (OSTI)

SYSTEM Impacts on the global maintenance management system Aircrafts, and in particular helicopters). Thus, the configuration "as maintained" (the one present into the maintenance management system Information System (MIS) like a CMMS (Customized Maintenance Management System). The follow

Paris-Sud XI, Université de

387

Rapid VLIW processor customization for signal processing applications using combinational hardware functions  

Science Conference Proceedings (OSTI)

This paper presents an architecture that combines VLIW (very long instruction word) processing with the capability to introduce application-specific customized instructions and highly parallel combinational hardware functions for the acceleration of ...

Raymond R. Hoare; Alex K. Jones; Dara Kusic; Joshua Fazekas; John Foster; Shenchih Tung; Michael McCloud

2006-01-01T23:59:59.000Z

388

An eCommerce platform for customized page design and content delivery  

E-Print Network (OSTI)

As eCommerce becomes more prevalent, good site design that can cater to users with different backgrounds and experience becomes increasingly important. While many web based applications provide customized content, these ...

Narang, Aman

2006-01-01T23:59:59.000Z

389

Order promising/fulfillment and customer/channel collaboration in supply chain management  

E-Print Network (OSTI)

This research investigates the order promising and fulfillment and customer and channel collaboration functions of a company. In addition to presenting more precise definitions, we identify and analyze current and emerging ...

An, Yimin, M. Eng. Massachusetts Institute of Technology

2006-01-01T23:59:59.000Z

390

Customer Response to RTP in Competitive Markets: A Study of Niagara Mohawk's Standard Offer Tariff  

E-Print Network (OSTI)

customers are to their maximum demand. We proceed with anSubstitution by Account and Maximum Demand N=119 Number offrom 60% to 70% of maximum demand) results in much smaller

Boisvert, Richard N.; Cappers, Peter; Goldman, Charles; Neenan, Bernie; Hopper, Nicole

2006-01-01T23:59:59.000Z

391

Transportation Research Board Conference January 10, 2005 Using Custom Transportation Data  

E-Print Network (OSTI)

Transportation Research Board Conference January 10, 2005 Using Custom Transportation Data Collection Software with Handheld Computers for Education, Research, and Practice Transportation Research, Andrew Byrd, Michael Rose, Tarek Abou El-Seoud #12;Transportation Research Board Conference January 10

Bertini, Robert L.

392

Besting the tract home : a software-based bricolage approach to affordable custom housing  

E-Print Network (OSTI)

Tract housing has earned its position as the overwhelmingly dominant paradigm of home building and ownership in America because it's such an efficient and therefore cost-effective system. Custom-designed housing has provable ...

Plewe, Thomas Clayton

2008-01-01T23:59:59.000Z

393

List of DOE radioisotope customers with summary of radioisotope shipments, FY 1979  

Science Conference Proceedings (OSTI)

The fifteenth edition of the radioisotope customer list was prepared at the request of the Division of Financial Services, Office of the Assistant Secretary for Environment, Department of Energy (DOE). This document lists DOE's radioisotope production and distribution activities by its facilities at Argonne National Laboratory; Pacific Northwest Laboratory; Brookhaven National Laboratory; Hanford Engineering Development Laboratory; Idaho Operations Office; Los Alamos Scientific Laboratory; Mound Facility; Oak Ridge National Laboratory; Rocky Flats Area Office; Savannah River Laboratory; and UNC Nuclear Industries, Inc. The information is divided into five sections: Isotope suppliers, facility, contracts and isotopes or services supplied; alphabetical list of customers, and isotopes purchased; alphabetical list of isotopes cross-referenced to customer numbers; geographical location of radioisotope customers; and radioisotope sales and transfers-FY 1979.

Burlison, J.S. (comp.)

1980-06-01T23:59:59.000Z

394

Customer adoption of small-scale on-site power generation  

E-Print Network (OSTI)

Fuel cells are used in a baseload role and microturbines aregeneration dominates baseload roles and vice-versa. 5.generation tends to fill a baseload role, and the customers

Siddiqui, Afzal S.; Marnay, Chris; Hamachi, Kristina S.; Rubio, F. Javier

2001-01-01T23:59:59.000Z

395

Service bulletin inventory management and modeling for aerospace parts in customer service organization  

E-Print Network (OSTI)

The Customer Service department of United Technology Corporation (UTC) Aerospace System is primarily responsible for providing spare parts, repair services, training, and technical support for products that UTC Aerospace ...

Pardede, Erna K. (Erna Kertasasmita)

2013-01-01T23:59:59.000Z

396

Establishing an inventory management process to meet high customer service levels in a vaccines organization  

E-Print Network (OSTI)

Inventory management is a complex aspect of Supply Chain Management that is frequently discussed and debated due to the fact that it has a high impact on customer satisfaction as well as financial performance. This thesis ...

Wonsowicz, Johanna Christine

2010-01-01T23:59:59.000Z

397

Custom Engineering parabolic glass reflector for the Sandia prototype solar collector  

DOE Green Energy (OSTI)

The parabolic glass reflector, designed and constructed by Custom Engineering, Incorporated, is described. A brief summary of its performance as part of the Sandia prototype trough solar collector system is given.

Otts, J.; Sallis, D.

1981-08-01T23:59:59.000Z

398

Energy, Power Quality, and Customer Load Efficiency Optimization and Total Energy  

Science Conference Proceedings (OSTI)

Using this report's worksheets and procedures, utilities can evaluate a wide range of common end-user productivity and power quality concerns that lead to new customer services and sales initiatives.

2002-02-14T23:59:59.000Z

399

Customer Risk from Real-Time Retail Electricity Pricing: Bill Volatility and Hedgability  

E-Print Network (OSTI)

then pay/receive the real- time price for deviations fromI assume that the retail real-time prices customers face arewould likely dampen real-time price volatility and the

Borenstein, Severin

2007-01-01T23:59:59.000Z

400

Lean Aircraft Initiative Implementation Workshop #3: Customer and Supplier Integration Across the Supply Chain  

E-Print Network (OSTI)

The integration of customers and suppliers along the supply chain involves a fundamental transformation of the way business is conducted in the Aerospace industry. Lean Aerospace Initiative (LAI) members, as well as ...

Cutcher-Gershenfeld, Joel

Note: This page contains sample records for the topic "ole potential customers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Customized digital manufacturing : concept to construction methods across varying product scales  

E-Print Network (OSTI)

Architectural design and construction is rapidly changing through the extensive adoption of digital design, manufacture and assembly tools. Customized assemblies are paired and recombined to create unique spatial enclosures. ...

Botha, Marcel

2006-01-01T23:59:59.000Z

402

Modeling and simulation for customer driven manufacturing system design and operations planning  

Science Conference Proceedings (OSTI)

Agility, speed and flexibility in production networks are required in today's global competition in the flat world. The accuracy of order date delivery promises is a key element in customer satisfaction. Agile production needs a management and evaluation ...

Juhani Heilala; Jari Montonen; Arttu Salmela; Pasi Järvenpää

2007-12-01T23:59:59.000Z

403

SDG&E Customers Can Connect Home Area Network Devices With Smart...  

Open Energy Info (EERE)

SDG&E Customers Can Connect Home Area Network Devices With Smart Meters Home > Groups > Utility Rate Graham7781's picture Submitted by Graham7781(1992) Super contributor 16...

404

Improving customer order visibility to enable improved planning and decision making  

E-Print Network (OSTI)

The General Purpose Drives organization of ABB Switzerland does not capture sufficient data on the movement of customer orders through the production process to make efficient decisions on where to allocate improvement ...

Krause, Karla M. (Karla Margarete)

2011-01-01T23:59:59.000Z

405

T-642: RSA SecurID update to Customers | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2: RSA SecurID update to Customers 2: RSA SecurID update to Customers T-642: RSA SecurID update to Customers June 9, 2011 - 12:45am Addthis PROBLEM: Certain characteristics of the attack on RSA indicated that the perpetrator's most likely motive was to obtain an element of security information that could be used to target defense secrets and related IP, rather than financial gain, PII, or public embarrassment. PLATFORM: RSA SecurID implementations ABSTRACT: RSA investigation has revealed that the attack resulted in certain information being extracted from RSA's systems. Some of that information is related to RSA's SecurID two-factor authentication products. reference LINKS: Open Letter to RSA Customers (update) CVE-2011-0322 RSA Fraud Resource Center RSA Security Practice DOE-CIRC T-640: RSA Access Manager Server CVE-2011-0322 Update

406

Synthesizing Utility Experiences in Educating and Engaging Customers in Smart Meter/Smart Grid Deployments  

Science Conference Proceedings (OSTI)

The Electric Power Research Institute (EPRI) and Commonwealth Edison (ComEd) co-sponsored a Synthesizing Utility Experiences in Educating and Engaging Customers in Smart Meter/Smart Grid Deployments workshop that was held July 7–8, 2012, in Chicago, Illinois. The workshop objective was to explore issues and encourage dialogue about experiences in designing and implementing effective customer education awareness campaigns in conjunction with wide-scale deployment of smart ...

2012-08-31T23:59:59.000Z

407

Open Advanced Metering Infrastructure (AMI) Systems: Leveraging Customer Broadband for Grid Integration  

Science Conference Proceedings (OSTI)

Retail broadband networks, such as cable, digital subscriber line (DSL), and high-speed wireless networks are available at nearly all customer premises in the United States and many other countries. With this increased availability, the percentage of the population subscribing to these networks for Internet service is rising. This report explores the possibility of using retail broadband networks for Smart Grid applications, particularly those related to residential customer integration. The report ...

2012-12-13T23:59:59.000Z

408

Open Market Customer: Volume 3: Methodology for Evaluation of Energy Enhancement Opportunities  

Science Conference Proceedings (OSTI)

EPRI's Open Market Customer (OMC) concept defines the American energy industry from the viewpoint of its customers and the market opportunities that arise from their energy expenditures. This report illustrates OMC principles and presents an approach for conducting OMC evaluations of energy enhancement opportunities. Volume 1 describes the OMC concept and documents eight case study assessments of commercial/industrial facilities. Volume 2 presents detailed analyses and data behind each case study. Volume...

1999-10-27T23:59:59.000Z

409

The U.S. Market Potential for Microturbines  

Science Conference Proceedings (OSTI)

Microturbines may have potential economic applications as on-site power generation sources for commercial and industrial sector customers because of their low cost, small size, modularity, and quiet operation. This analysis identifies the most attractive microturbine unit sizes applicable to each of these markets and provides information on which market segments and geographic regions offer the largest opportunities.

1999-12-13T23:59:59.000Z

410

The Economic Value of PV and Net Metering to Residential Customers in California  

SciTech Connect

In this paper, we analyze the bill savings from PV for residential customers of the California's two largest electric utilities, under existing net metering tariffs as well as under several alternative compensation mechanisms. We find that economic value of PV to the customer is dependent on the structure of the underlying retail electricity rate and can vary quite significantly from one customer to another. In addition, we find that the value of the bill savings from PV generally declines with PV penetration level, as increased PV generation tends to offset lower-priced usage. Customers in our sample from both utilities are significantly better off with net metering than with a feed-in tariff where all PV generation is compensated at long-run avoided generation supply costs. Other compensation schemeswhich allow customers to displace their consumption with PV generation within each hour or each month, and are also based on the avoided costs, yield similar value to the customer as net metering.

Darghouth, Naim; Barbose, Galen; Wiser, Ryan

2010-05-17T23:59:59.000Z

411

Customer Response to RTP in Competitive Markets: A Study ofNiagara Mohawk's Standard Offer Tariff  

Science Conference Proceedings (OSTI)

Utilizing load, price, and survey data for 119 largecustomers that paid competitively determined hourly electricity pricesannounced the previous day between 2000 and 2004, this study providesinsight into the factors that determine the intensity of price response.Peak and off-peak electricity can be: perfect complements, substitutes,or substitutes where high peak prices cause temporary disconnection fromthe grid, as for some firms with on-site generation. The averageelasticity of substitution is 0.11. Thirty percent of the customers usepeak and off-peak electricity in fixed proportions. The 18 percent withelasticities greater than 0.10 provide 75 percent of the aggregate priceresponse. In contrast to Industrial customers, Commercial/Retail andGovernment/Education customers are more price responsive on hot days andwhen the ratio of peak to off-peak prices is high. Price responsivenessis not substantially reduced when customers operate near peak usage.Diversity of customer circumstances and price response suggest dynamicpricing is suited for some, but not all customers.

Boisvert, Richard N.; Cappers, Peter; Goldman, Charles; Neenan,Bernie; Hopper, Nicole

2006-06-01T23:59:59.000Z

412

The Economic Value of PV and Net Metering to Residential Customers in California  

SciTech Connect

In this paper, we analyze the bill savings from PV for residential customers of the California's two largest electric utilities, under existing net metering tariffs as well as under several alternative compensation mechanisms. We find that economic value of PV to the customer is dependent on the structure of the underlying retail electricity rate and can vary quite significantly from one customer to another. In addition, we find that the value of the bill savings from PV generally declines with PV penetration level, as increased PV generation tends to offset lower-priced usage. Customers in our sample from both utilities are significantly better off with net metering than with a feed-in tariff where all PV generation is compensated at long-run avoided generation supply costs. Other compensation schemeswhich allow customers to displace their consumption with PV generation within each hour or each month, and are also based on the avoided costs, yield similar value to the customer as net metering.

Darghouth, Naim; Barbose, Galen; Wiser, Ryan

2010-05-17T23:59:59.000Z

413

Using Smart Meter Data to Develop Customer Insights  

Science Conference Proceedings (OSTI)

Smart meter deployment in the United States has grown steadily in recent years, and market penetration will continue to increase. Globally, smart meters are evolving into a huge market. This flood of smart meter deployments has introduced a new quantitya significantly large amount of meter data, which could possibly be the single largest volume of data collected and managed by utilities. The potential benefits are significant, but many utilities are assessing methods to manage the volume of data being co...

2011-12-22T23:59:59.000Z

414

Customer Strategies for Responding to Day-Ahead Market HourlyElectricity Pricing  

Science Conference Proceedings (OSTI)

Real-time pricing (RTP) has been advocated as an economically efficient means to send price signals to customers to promote demand response (DR) (Borenstein 2002, Borenstein 2005, Ruff 2002). However, limited information exists that can be used to judge how effectively RTP actually induces DR, particularly in the context of restructured electricity markets. This report describes the second phase of a study of how large, non-residential customers' adapted to default-service day-ahead hourly pricing. The customers are located in upstate New York and served under Niagara Mohawk, A National Grid Company (NMPC)'s SC-3A rate class. The SC-3A tariff is a type of RTP that provides firm, day-ahead notice of hourly varying prices indexed to New York Independent System Operator (NYISO) day-ahead market prices. The study was funded by the California Energy Commission (CEC)'s PIER program through the Demand Response Research Center (DRRC). NMPC's is the first and longest-running default-service RTP tariff implemented in the context of retail competition. The mix of NMPC's large customers exposed to day-ahead hourly prices is roughly 30% industrial, 25% commercial and 45% institutional. They have faced periods of high prices during the study period (2000-2004), thereby providing an opportunity to assess their response to volatile hourly prices. The nature of the SC-3A default service attracted competitive retailers offering a wide array of pricing and hedging options, and customers could also participate in demand response programs implemented by NYISO. The first phase of this study examined SC-3A customers' satisfaction, hedging choices and price response through in-depth customer market research and a Constant Elasticity of Substitution (CES) demand model (Goldman et al. 2004). This second phase was undertaken to answer questions that remained unresolved and to quantify price response to a higher level of granularity. We accomplished these objectives with a second customer survey and interview effort, which resulted in a higher, 76% response rate, and the adoption of the more flexible Generalized Leontief (GL) demand model, which allows us to analyze customer response under a range of conditions (e.g. at different nominal prices) and to determine the distribution of individual customers' response.

Goldman, Chuck; Hopper, Nicole; Bharvirkar, Ranjit; Neenan,Bernie; Boisvert, Dick; Cappers, Peter; Pratt, Donna; Butkins, Kim

2005-08-25T23:59:59.000Z

415

The role of interruptible natural gas customers in New England heating oil markets: A preliminary examination of events in January-February 2000  

Science Conference Proceedings (OSTI)

This report provides an analysis of data collected from gas service providers and end-use customers in the six New England States and offers a preliminary assessment of the impact of interruptible gas customers on the distillate fuel oil market this past winter. Based on information collected and analyzed as of October 2000, the main findings areas follows: (1) For interruptible gas customers with distillate fuel oil as a backup fuel, their volume of interruptions was equivalent to about 1 to 2 percent of the total sales of distillate fuel oil in New England during January-February 2000. For the two peak weeks of gas supply interruptions, however, the equivalent volume of distillate fuel oil amounted to an estimated 3 to 6 percent of total sales in New England. There were no interruptions of the natural gas service during the 2-month period. (2) Purchases of distillate fuel oil by interruptible gas customers may have contributed somewhat to the spike in the price of distillate fuel oil in January-February 2000, especially during the peak weeks of gas interruptions. Nevertheless, other factors--a sudden drop in temperatures, low regional stocks of distillate fuels, and weather-related supply problems during a period of high customer demand--appear to have played a significant role in this price spike, as they have in previous spikes. (3) While this preliminary analysis suggests that interruptible natural gas service does not threaten the stability of the home heating oil market, several steps might be taken-without undermining the benefits of interruptible service--to reduce the potential adverse impacts of gas supply interruptions in times of market stress. Regardless of the magnitude of the impact of distillate fuel oil purchases by interruptible gas customers on Northeast heating oil markets, the threat of future heating oil price spikes and supply problems still remains. To help counter the threat, President Clinton in July 2000 directed Secretary Richardson to establish a heating oil component of the Strategic Petroleum Reserve in the Northeast, and 2 million barrels of heating oil are now stored in the reserve. Other possible policy options are outlined.

None

2000-11-01T23:59:59.000Z

416

Unlocking the potential for efficiency and demand response through advanced  

NLE Websites -- All DOE Office Websites (Extended Search)

Unlocking the potential for efficiency and demand response through advanced Unlocking the potential for efficiency and demand response through advanced metering Title Unlocking the potential for efficiency and demand response through advanced metering Publication Type Conference Paper LBNL Report Number LBNL-55673 Year of Publication 2004 Authors Levy, Roger, Karen Herter, and John Wilson Conference Name 2004 ACEEE Summer Study on Energy Efficiency in Buildings Date Published 06/2004 Publisher ACEEE Conference Location Pacific Grove, CA Call Number California Energy Commission Keywords demand response, demand response and distributed energy resources center, demand response research center, energy efficiency demand response advanced metering, rate programs & tariffs Abstract Reliance on the standard cumulative kilowatt-hour meter substantially compromises energy efficiency and demand response programs. Without advanced metering, utilities cannot support time-differentiated rates or collect the detailed customer usage information necessary to (1) educate the customer to the economic value of efficiency and demand response options, or (2) distribute load management incentives proportional to customer contribution. These deficiencies prevent the customer feedback mechanisms that would otherwise encourage economically sound demand-side investments and behaviors. Thus, the inability to collect or properly price electricity usage handicaps the success of almost all efficiency and demand response options.

417

Not All Large Customers are Made Alike: Disaggregating Response toDefault-Service Day-Ahead Market Pricing  

SciTech Connect

For decades, policymakers and program designers have gone onthe assumption that large customers, particularly industrial facilities,are the best candidates for realtime pricing (RTP). This assumption isbased partly on practical considerations (large customers can providepotentially large load reductions) but also on the premise thatbusinesses focused on production cost minimization are most likely toparticipate and respond to opportunities for bill savings. Yet fewstudies have examined the actual price response of large industrial andcommercial customers in a disaggregated fashion, nor have factors such asthe impacts of demand response (DR) enabling technologies, simultaneousemergency DR program participation and price response barriers been fullyelucidated. This second-phase case study of Niagara Mohawk PowerCorporation (NMPC)'s large customer RTP tariff addresses theseinformation needs. The results demonstrate the extreme diversity of largecustomers' response to hourly varying prices. While two-thirdsexhibitsome price response, about 20 percent of customers provide 75-80 percentof the aggregate load reductions. Manufacturing customers are mostprice-responsive as a group, followed by government/education customers,while other sectors are largely unresponsive. However, individualcustomer response varies widely. Currently, enabling technologies do notappear to enhance hourly price response; customers report using them forother purposes. The New York Independent System Operator (NYISO)'semergency DR programs enhance price response, in part by signaling tocustomers that day-ahead prices are high. In sum, large customers docurrently provide moderate price response, but there is significant roomfor improvement through targeted programs that help customers develop andimplement automated load-response strategies.

Hopper, Nicole; Goldman, Charles; Neenan, Bernie

2006-05-12T23:59:59.000Z

418

Attachment CATEGORICAL EXCLUSION FOR U.S. CUSTOMS AND BORDER PROTECTION  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CATEGORICAL EXCLUSION FOR U.S. CUSTOMS AND BORDER PROTECTION CATEGORICAL EXCLUSION FOR U.S. CUSTOMS AND BORDER PROTECTION HIGH-ENERGY RADIOGRAPHY TEST CAPABILITY, PACIFIC NORTHWEST NATIONAL LABORATORY, RICHLAND, WASHINGTON Proposed Action: To support the U.S. Department of Homeland Security's Customs and Border Protection (CBP) Program, the U.S. Department of Energy (DOE) Pacific Northwest Site Office (PNSO) proposes to test high-energy radiography systems at the Pacific Northwest National Laboratory (PNNL) site. These systems have a primary beam energy of less than 8.0 million electron volts (MeV) and an average beam power of less than 300 watts (W). Location of Action: The Physical Sciences Facility (PSF) Complex at the PNNL site. Description of the Proposed Action: PNNL proposes to test the operation of high-energy radiography systems that rely on a pulsed

419

Customized Resources for Others | OSTI, US Dept of Energy, Office of  

Office of Scientific and Technical Information (OSTI)

Customized Resources for Others Customized Resources for Others OSTI applies these capabilities to provide customized information tools and services for individual DOE offices and non-DOE government entities on a cost-reimbursable basis. These services are provided under the authority of the Economy Act (31 U.S.C. 1535-36). Expertise is available in a range of technical areas, including: Information science and subject-matter analysis Metadata and full-text management Electronic dissemination using various media Distributed searching Data harvesting OSTI develops and maintains subject-specific databases, web portals and websites, manages information systems, and provides electronic publishing and creative services to help DOE program offices, other government agencies, and international organizations better manage their information

420

The California Solar Initiative: Cost Trends in Customer-Sited PV  

NLE Websites -- All DOE Office Websites (Extended Search)

The California Solar Initiative: Cost Trends in Customer-Sited PV The California Solar Initiative: Cost Trends in Customer-Sited PV Installations and the Impact of Retail Rate Design on the Economics of PV Systems Speaker(s): Ryan Wiser Date: January 9, 2007 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Anita Estner California's new solar initiative will dedicate over $3 billion of public funds to support the installation of customer-sited solar installations in the state over the next 10 years, principally in the form of residential and commercial photovoltaic (PV) systems. These efforts build from historical programs that have made California the third largest PV market in the world, behind Germany and Japan. This talk will summarize recent efforts at Berkeley Lab to advise the state's energy agencies in the design

Note: This page contains sample records for the topic "ole potential customers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

CET2001 Customer Led Network Revolution (Smart Grid Project) | Open Energy  

Open Energy Info (EERE)

CET2001 Customer Led Network Revolution (Smart Grid Project) CET2001 Customer Led Network Revolution (Smart Grid Project) Jump to: navigation, search Project Name CET2001 Customer Led Network Revolution Country United Kingdom Coordinates 55.378052°, -3.435973° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":55.378052,"lon":-3.435973,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

422

Critical Issues Facing Federal Customers and the Electric Industry: A Call to Partnering  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Issues Facing Federal Issues Facing Federal Critical Issues Facing Federal Customers and the Electric Industry: Customers and the Electric Industry: A Call to Partnering A Call to Partnering Steve Kiesner Director, National Customer Markets Edison Electric Institute FUPWG November 28, 2007 Overview  State of the industry  Review recent Energy Infrastructure Picture State of the Industry State of the Industry The Challenge of Balancing Core Drivers The Challenge of Balancing Core Drivers Rising Costs Rising Costs and Prices and Prices Climate Climate Change Change Energy Energy Efficiency Efficiency Enormous Enormous CapEx CapEx No longer a declining cost industry Fuel, infrastructure components, global industrialization and competition $ 750 Billion  $ 1.2 Trillion Exceeds current capitalization

423

SoCalGas - Custom Non-Residential Energy Efficiency Program | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Custom Non-Residential Energy Efficiency Program Custom Non-Residential Energy Efficiency Program SoCalGas - Custom Non-Residential Energy Efficiency Program < Back Eligibility Agricultural Commercial Industrial Savings Category Other Heating & Cooling Commercial Heating & Cooling Heating Appliances & Electronics Home Weatherization Construction Commercial Weatherization Design & Remodeling Manufacturing Water Heating Maximum Rebate Energy Efficiency Calculated Incentive Program: $1,000,000/project and $2,000,000/premise/year Savings By Design Program: $500,000/year Program Info Funding Source Public Purpose Goods Surcharge Start Date 1/1/2010 Expiration Date 12/31/2012 State California Program Type Utility Rebate Program Rebate Amount $1/therm saved annually or 50% of the project cost (excluding taxes and

424

Customer service model for waste tracking at Los Alamos National Laboratory  

SciTech Connect

The deployment of any new software system in a production facility will always face multiple hurtles in reaching a successful acceptance. However, a new waste tracking system was required at the plutonium processing facility at Los Alamos National Laboratory (LANL) where waste processing must be integrated to handle Special Nuclear Materials tracking requirements. Waste tracking systems can enhance the processing of waste in production facilities when the system is developed with a focus on customer service throughout the project life cycle. In March 2010 Los Alamos National Laboratory Waste Technical Services (WTS) replaced the aging systems and infrastructure that were being used to support the plutonium processing facility. The Waste Technical Services (WTS) Waste Compliance and Tracking System (WCATS) Project Team, using the following customer service model, succeeded in its goal to meet all operational and regulatory requirements, making waste processing in the facility more efficient while partnering with the customer.

Dorries, Alison M [Los Alamos National Laboratory; Montoya, Andrew J [Los Alamos National Laboratory; Ashbaugh, Andrew E [Los Alamos National Laboratory

2010-11-10T23:59:59.000Z

425

Custom Coolers, LLC Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Custom Coolers, LLC Custom Coolers, LLC Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. 20585 ) ) ) ) ) ) ORDER Case Number: 2013-CE-5315 By the General Counsel, U.S. Department of Energy: I. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Custom Coolers, LLC ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations ofthe compliance certification requirements located at 10 C.F.R. §§ 429.12 and 429.53. 2. DOE and Respondent have negotiated the terms of the Compromise Agreement that resolve this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the facts

426

ORISE: Delivering Cost Savings and Customer Service with Off-the-Shelf  

NLE Websites -- All DOE Office Websites (Extended Search)

Cost Savings and Customer Service Cost Savings and Customer Service ORISE delivers Cost Savings and Customer Service with Off-the-Shelf Software The Oak Ridge Institute for Science and Education's (ORISE) Scientific Peer Review Program is no different than any other organization striving to do more with less in the current economy. With smaller budgets and faster turnaround needed for proposal reviews, utilizing Web-based collaboration tools to share information is necessary. Therefore, the ORISE team built a project tracking and management system with off-the-shelf products-an immediate cost and time-saver. In a recent example involving the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy (EERE), ORISE conducted an annual merit review-a complete and objective examination of DOE funded projects

427

American Recovery and Reinvestment Act Federal Energy Management Program Technical Assistance Project 184 U.S. Customs and Border Protection Laboratory, Houston, Texas  

Science Conference Proceedings (OSTI)

This report documents the findings of an on-site energy audit of the U.S. Customs and Border Protection (CBP) Laboratory in Houston, Texas. The focus of the audit was to identify various no-cost and low-cost energy efficiency opportunities that, once implemented, would reduce electricity and gas consumption and increase the operational efficiency of the building. This audit also provided an opportunity to identify potential capital cost projects that should be considered in the future to acquire additional energy (electric and gas) and water savings to further increase the operational efficiency of the building.

Arends, J.; Sandusky, William F.

2010-09-30T23:59:59.000Z

428

Number of Retail Customers by State by Sector, 1990-2012  

U.S. Energy Information Administration (EIA) Indexed Site

Number of Retail Customers by State by Sector, 1990-2012" Number of Retail Customers by State by Sector, 1990-2012" "Year","State","Industry Sector Category","Residential","Commercial","Industrial","Transportation","Other","Total" 2012,"AK","Total Electric Industry",275405,48790,1263,0,"NA",325458 2012,"AL","Total Electric Industry",2150977,357395,7168,0,"NA",2515540 2012,"AR","Total Electric Industry",1332154,181823,33926,2,"NA",1547905 2012,"AZ","Total Electric Industry",2585638,305250,7740,0,"NA",2898628 2012,"CA","Total Electric Industry",13101887,1834779,73805,12,"NA",15010483

429

Power Quality Mitigation Technology Demonstration at Industrial Customer Sites: Industrial and Utility Harmonic Mitigation Guideline s and Case Studies  

Science Conference Proceedings (OSTI)

However the restructuring of the electric power industry shakes out, the commercial/industrial customer's need for quality power will increase; and customer service will remain a key to retaining current accounts and attracting new customers. The need for demonstrating new harmonics mitigation technologies will thus be an important factor for the wire side of the business as well as for energy service companies. This report provides guidelines for implementing harmonics mitigation demonstration projects ...

2000-11-30T23:59:59.000Z

430

Identifying patients in target customer segments using a two-stage clustering-classification approach: A hospital-based assessment  

Science Conference Proceedings (OSTI)

Identifying patients in a Target Customer Segment (TCS) is important to determine the demand for, and to appropriately allocate resources for, health care services. The purpose of this study is to propose a two-stage clustering-classification model through ... Keywords: Customer relationship management (CRM), K-means clustering algorithm, Recency-Frequency-Monetary (RFM) analysis model, Rough set theory (RST), Target customer segment (TCS)

You-Shyang Chen; Ching-Hsue Cheng; Chien-Jung Lai; Cheng-Yi Hsu; Han-Jhou Syu

2012-02-01T23:59:59.000Z

431

A framework and review of customer outage costs: Integration and analysis of electric utility outage cost surveys  

E-Print Network (OSTI)

BPA, Southern Company, Duke Energy, Southern California1999) Niagara Mohawk (1985) Duke Energy Company (1992, 1997)Gas and Electric, and Duke Energy) the same customer classes

Lawton, Leora; Sullivan, Michael; Van Liere, Kent; Katz, Aaron; Eto, Joseph

2003-01-01T23:59:59.000Z

432

Peak load management: Potential options  

SciTech Connect

This report reviews options that may be alternatives to transmission construction (ATT) applicable both generally and at specific locations in the service area of the Bonneville Power Administration (BPA). Some of these options have potential as specific alternatives to the Shelton-Fairmount 230-kV Reinforcement Project, which is the focus of this study. A listing of 31 peak load management (PLM) options is included. Estimated costs and normalized hourly load shapes, corresponding to the respective base load and controlled load cases, are considered for 15 of the above options. A summary page is presented for each of these options, grouped with respect to its applicability in the residential, commercial, industrial, and agricultural sectors. The report contains comments on PLM measures for which load shape management characteristics are not yet available. These comments address the potential relevance of the options and the possible difficulty that may be encountered in characterizing their value should be of interest in this investigation. The report also identifies options that could improve the efficiency of the three customer utility distribution systems supplied by the Shelton-Fairmount Reinforcement Project. Potential cogeneration options in the Olympic Peninsula are also discussed. These discussions focus on the options that appear to be most promising on the Olympic Peninsula. Finally, a short list of options is recommended for investigation in the next phase of this study. 9 refs., 24 tabs.

Englin, J.E.; De Steese, J.G.; Schultz, R.W.; Kellogg, M.A.

1989-10-01T23:59:59.000Z

433

An empirical evaluation of rotation-based ensemble classifiers for customer churn prediction  

Science Conference Proceedings (OSTI)

Several studies have demonstrated the superior performance of ensemble classification algorithms, whereby multiple member classifiers are combined into one aggregated and powerful classification model, over single models. In this paper, two rotation-based ... Keywords: AUC, CRM, Customer churn prediction, Database marketing, Ensemble classification, ICA, Lift, RotBoost, Rotation Forest, Rotation-based ensemble classifiers

Koen W. De Bock; Dirk Van den Poel

2011-09-01T23:59:59.000Z

434

Information systems continuance intention of web-based applications customers: The case of online banking  

Science Conference Proceedings (OSTI)

The proliferation of the Internet has not only allowed businesses to offer their products and services through web-based applications, but it has also undermined their ability to retain their customers. It has reduced search costs, opened up barriers ... Keywords: Commitment, Commitment-Trust theory, End-user relationship, Relationship marketing, Retention, Trust, Web-based application

Banphot Vatanasombut; Magid Igbaria; Antonis C. Stylianou; Waymond Rodgers

2008-11-01T23:59:59.000Z

435

Knowledge Innovation System and Customer Impact of Knowledge-Intensive Business Services  

Science Conference Proceedings (OSTI)

Following the development of economy, the service industry has already exceeded the manufacturing industry and has been one country's leading industry. Providing knowledge is the service way of Knowledge-Intensive business services (KIBS). KIBS are the ... Keywords: knowledge-intensive business service, knowledge innovation, innovation system, customer influence

Jun Tao

2012-10-01T23:59:59.000Z

436

Estimating the Customer-Level Demand for Electricity Under Real-Time Market Prices  

E-Print Network (OSTI)

This paper presents estimates of the customer-level demand for electricity by industrial and commercial customers purchasing electricity according to the half-hourly energy prices from the England and Wales (E&W) electricity market. These customers also face the possibility of a demand charge on its electricity consumption during the three half-hour periods that are coincident with E&W system peaks. Although energy charges are largely known by 4 PM the day prior to consumption, a fraction of the energy charge and the identity of the half-hour periods when demand charges occur are only known with certainty ex post of consumption. Four years of data from a Regional Electricity Company (REC) in the United Kingdom is used to quantify the half-hourly customer-level demands under this real-time pricing program. The econometric model developed and estimated here quantifies the extent of intertemporal substitution in electricity consumption across pricing periods within the day due to changes ...

Robert H. Patrick; Frank A. Wolak

1997-01-01T23:59:59.000Z

437

Demand Response from Day-Ahead Hourly Pricing for Large Customers  

SciTech Connect

Day-ahead default-service RTP for large customers not only improves the linkage between wholesale and retail markets, but also promotes the development of retail competition. The default service sets a standard for competitive alternatives and its structure shapes the types of retail market products that develop. (author)

Hopper, Nicole; Goldman, Charles; Neenan, Bernie

2006-04-15T23:59:59.000Z

438

Bert Hayes, bhayes@infosec.utexas.edu How to Create a Custom Live CD for Secure  

E-Print Network (OSTI)

CD for secure remote incident handling on Windows and Linux systems. The process will include how for Remote Incident Handling 2 Bert Hayes, bhayes@infosec.utexas.edu Table of Contents?..................................................................................................................39 #12;How to Create a Custom Live CD for Remote Incident Handling 3

Texas at Austin, University of

439

Temporal analysis of clusters of supermarket customers: conventional versus interval set approach  

Science Conference Proceedings (OSTI)

Temporal data mining is the application of data mining techniques to data that takes the time dimension into account. This paper studies changes in cluster characteristics of supermarket customers over a 24 week period. Such an analysis can be useful ... Keywords: loyalty, modified kohonen SOM, rough set theory, temporal data mining

Pawan Lingras; Mofreh Hogo; Miroslav Snorek; Chad West

2005-06-01T23:59:59.000Z

440

E.ON International Research Initiative 2012 topic: Smart Home a new customer relationship with energy  

E-Print Network (OSTI)

: · Smart Home energy consumption including thermal and electrical demand and load categories, all related patterns and user profiles, for customers in the UK and Spain. In the next step towards optimizing energy with energy Virtual world to visualize home energy issues A virtual world of Smart Home technologies

Weyde, Tillman

Note: This page contains sample records for the topic "ole potential customers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

DRIVE Analysis Tool Generates Custom Vehicle Drive Cycles Based on Real-World Data (Fact Sheet)  

DOE Green Energy (OSTI)

This fact sheet from the National Renewable Energy Laboratory describes the Drive-Cycle Rapid Investigation, Visualization, and Evaluation (DRIVE) analysis tool, which uses GPS and controller area network data to characterize vehicle operation and produce custom vehicle drive cycles, analyzing thousands of hours of data in a matter of minutes.

Not Available

2013-04-01T23:59:59.000Z

442

Customer Choice and Green Power Marketing: A Critical Review and Analysis of Experience to Date  

E-Print Network (OSTI)

. Green power marketing--the business of selling electricity products distinguished by their environmental or convenience. Getting commuters out of their single passenger cars and into mass Deregulation of the Utility attitudes and individual behaviors. -- With the advent of customer choice in the U.S. electricity sector

443

US Department of Energy radioisotope customers with summary of radioisotope shipments, FY 1988  

Science Conference Proceedings (OSTI)

Pacific Northwest Laboratory (PNL) prepared this edition of the radioisotope customer list at the request of the Office of Health and Environmental Research (ER-73), Office of Energy Research, US Department of Energy (DOE). This is the 25th report in a series dating from 1964. This report covers DOE radioisotope sales and distribution activities by its facilities to domestic, foreign and other DOE facilities for FY 1988. The report is divided into five sections: radioisotope suppliers, facility contacts, and radioisotopes or services supplied; a list of customers, suppliers, and radioisotopes purchased; a list of radioisotopes purchased cross-referenced to customer numbers; geographic locations of radioisotope customers; and radioisotope sales and transfers -- FY 1988. Radioisotopes not previously reported in this series of reports were argon-37, arsenic-72, arsenic-73, bismuth-207, gadolinium-151, rhenium-188, rhodium-101, selenium-72, xenon-123 and zirconium-88. The total value of DOE radioisotope sales for FY 1988 was $11.1 million, an increase of 3% from FY 1987.

Van Houten, N.C.

1989-06-01T23:59:59.000Z

444

Automated Recurrent Neural Network Design of a Neural Controller in a Custom Power Device  

Science Conference Proceedings (OSTI)

A general purpose implementation of the Tabu Search metaheuristic, called Universal Tabu Search, is used to optimally design a Locally Recurrent Neural Network architecture. Indeed, the design of a neural network is a tedious and time consuming trial ... Keywords: custom power protection device, neural controller, recurrent neural networks, universal Tabu Search

B. Cannas; G. Celli; A. Fanni; F. Pilo

2001-05-01T23:59:59.000Z

445

Voices of Experience: New Guide Offers Utilities’ Insights on Engaging with Smart Grid Customers  

Energy.gov (U.S. Department of Energy (DOE))

The Voices of Experience | Insights on Smart Grid Customer Engagement guide builds on the knowledge shared during a series of DOE-sponsored regional peer-to-peer workshops during which utilities discussed compelling smart grid topics and issues. The guide offers practical advice and lessons learned, and showcases creative, high-impact approaches.

446

Joint selection of customs broker agencies and international road transportation firms by a fuzzy analytic network process approach  

Science Conference Proceedings (OSTI)

This paper considers a special case for logistics activities in Turkey: a joint selection of customs broker agency and international road transportation firm. For this purpose a decision-making team has been constituted, including members of logistics ... Keywords: Analytic network process, Customs broker, Fuzzy sets, International road transportation, Logistic activities

Arzum Özgen; Mehmet Tanyas

2011-07-01T23:59:59.000Z

447

Pricing and promotion strategies of an online shop based on customer segmentation and multiple objective decision making  

Science Conference Proceedings (OSTI)

The advent of the Internet and web technologies has enabled the prosperity of virtual stores, which greatly reduce customers' search costs and retailers' overhead. However, the furious competition between online shops makes it difficult for them to generate ... Keywords: Bargaining, Customer relationship management, Multiple objective decision making, Online shop, Pricing, Promotion

C.-C. Henry Chan; Chi-Bin Cheng; Wen-Chen Hsien

2011-11-01T23:59:59.000Z

448

Control and Protection of Power Electronics Interfaced Distri-buted Generation Systems in a Customer-Driven Microgrid  

E-Print Network (OSTI)

in a Customer-Driven Microgrid Fang Z. Peng, Yun Wei Li and Leon M. Tolbert Abstract ­ This paper discusses-driven microgrid (CDM). Particularly, the following topics will be addressed: microgrid system configurations); renewable energy source (RES); micro-source; microgrid; customer-driven micro- grid (CDM), power electronics

Tolbert, Leon M.

449

Customer Impact Evaluation for the 2009 Southern California Edison Participating Load Pilot  

SciTech Connect

The 2009 Participating Load Pilot Customer Impact Evaluation provides evidence that short duration demand response events which cycle off air conditioners for less than thirty minutes in a hot, dry environment do not lead to a significant degradation in the comfort level of residents participating in the program. This was investigated using: (1) Analysis of interval temperature data collected from inside residences of select program participants; and (2) Direct and indirect customer feedback from surveys designed and implemented by Southern California Edison at the conclusion of the program season. There were 100 indoor temperature monitors that were acquired by LBNL for this study that transmitted temperature readings at least once per hour with corresponding timestamps during the program season, June-October, 2009. Recorded temperatures were transferred from the onsite telemetry devices to a mesh network, stored, and then delivered to KEMA for analysis. Following an extensive data quality review, temperature increases during each of the thirty demand response test events were calculated for each device. The results are as follows: (1) Even for tests taking place during outside temperatures in excess of 100 degrees Fahrenheit, over 85 percent of the devices measured less than a 0.5 degree Fahrenheit temperature increase indoors during the duration of the event. (2) For the increases that were observed, none was more than 5 degrees and it was extremely rare for increases to be more than 2 degrees. At the end of the testing season SCE and KEMA designed and conducted a survey of the a facilities and public works managers and approximately 100 customers feedback survey to assess the extent the PLP events were noticed or disrupted the comfort level of participants. While only a small sampling of 3 managers and 16 customer surveys were completed, their responses indicate: (1) No customer reported even a moderate level of discomfort from the cycling-off of their air conditioners during test events; and (2) Very few customers noticed any of the thirty events at all. The results of this study suggest that the impacts on comfort from short-duration interruptions of air-conditioners, even in very hot climates, are for the most part very modest, if they are even noticed at all. Still, we should expect that these impacts will increase with longer interruptions of air-conditioning. By the same token, we should also expect that they will be less significant in cooler climates.

Gifford, William; Bodmann, Shawn; Young, Paul; Eto, Joseph H.; Laundergan, Jeremy

2010-05-28T23:59:59.000Z

450

California Industrial Energy Efficiency Potential  

SciTech Connect

This paper presents an overview of the modeling approach andhighlights key findings of a California industrial energy efficiencypotential study. In addition to providing estimates of technical andeconomic potential, the study examines achievable program potential undervarious program-funding scenarios. The focus is on electricity andnatural gas savings for manufacturing in the service territories ofCalifornia's investor-owned utilities (IOUs). The assessment is conductedby industry type and by end use. Both crosscutting technologies andindustry-specific process measures are examined. Measure penetration intothe marketplace is modeled as a function of customer awareness, measurecost effectiveness, and perceived market barriers. Data for the studycomes from a variety of sources, including: utility billing records, theEnergy Information Association (EIA) Manufacturing Energy ConsumptionSurvey (MECS), state-sponsored avoided cost studies, energy efficiencyprogram filings, and technology savings and cost data developed throughLawrence Berkeley National Laboratory (LBNL). The study identifies 1,706GWh and 47 Mth (million therms) per year of achievable potential over thenext twelve years under recent levels of program expenditures, accountingfor 5.2 percent of industrial electricity consumption and 1.3 percent ofindustrial natural gas consumption. These estimates grow to 2,748 GWh and192 Mth per year if all cost-effective and achievable opportunities arepursued. Key industrial electricity end uses, in terms of energy savingspotential, include compressed air and pumping systems that combine toaccount for about half of the total achievable potential estimates. Fornatural gas, savings are concentrated in the boiler and process heatingend uses, accounting for over 99 percent to total achievablepotential.

Coito, Fred; Worrell, Ernst; Price, Lynn; Masanet, Eric; RafaelFriedmann; Rufo, Mike

2005-06-01T23:59:59.000Z

451

Federal Customers  

Science Conference Proceedings (OSTI)

... NIST to exercise its functions for other organizations and to receive reimbursement or advance payment based upon fixed prices or actual costs; ...

2013-07-19T23:59:59.000Z

452

Customer Satisfaction  

NLE Websites -- All DOE Office Websites (Extended Search)

5 Student Feedback Process 110406 Page 1 of 6 EOTA - Business Process Document Title: Student Feedback Process Document Number: P-005 Rev. 110406 Document Owner: Elizabeth Sousa...

453

Customer List  

NLE Websites -- All DOE Office Websites (Extended Search)

Power Agency Public Utility Districts CA SN CVP California Independent System Operator State Agencies CA SN CVP California Medical Facility-Vacaville State Agencies CA SN CVP...

454

Our Customers  

NLE Websites -- All DOE Office Websites (Extended Search)

(NNSA). As of 2012, about 65% of our work is done for NNSA programs to care for America's nuclear weapons stockpile and others that seek to control the spread of nuclear weapons...

455

Potential Energy Choices and Their Determinants for the Residential Sector  

Science Conference Proceedings (OSTI)

This report is part of the Understanding Energy Markets research initiative and is the third in a series of four reports championed by EPRIsolutions to deepen the understanding of the residential marketplace. It is designed to support energy suppliers in predicting and winning market share potential. In particular, it examines residential customers' past switching behavior, reasons for switching electricity providers, profiles of likely electric switchers, and interest in bundled energy offers. The exper...

2000-11-22T23:59:59.000Z

456

A framework and review of customer outage costs: Integration and analysis of electric utility outage cost surveys  

Science Conference Proceedings (OSTI)

A clear understanding of the monetary value that customers place on reliability and the factors that give rise to higher and lower values is an essential tool in determining investment in the grid. The recent National Transmission Grid Study recognizes the need for this information as one of growing importance for both public and private decision makers. In response, the U.S. Department of Energy has undertaken this study, as a first step toward addressing the current absence of consistent data needed to support better estimates of the economic value of electricity reliability. Twenty-four studies, conducted by eight electric utilities between 1989 and 2002 representing residential and commercial/industrial (small, medium and large) customer groups, were chosen for analysis. The studies cover virtually all of the Southeast, most of the western United States, including California, rural Washington and Oregon, and the Midwest south and east of Chicago. All variables were standardized to a consistent metric and dollar amounts were adjusted to the 2002 CPI. The data were then incorporated into a meta-database in which each outage scenario (e.g., the lost of electric service for one hour on a weekday summer afternoon) is treated as an independent case or record both to permit comparisons between outage characteristics and to increase the statistical power of analysis results. Unadjusted average outage costs and Tobit models that estimate customer damage functions are presented. The customer damage functions express customer outage costs for a given outage scenario and customer class as a function of location, time of day, consumption, and business type. One can use the damage functions to calculate outage costs for specific customer types. For example, using the customer damage functions, the cost experienced by an ''average'' customer resulting from a 1 hour summer afternoon outage is estimated to be approximately $3 for a residential customer, $1,200 for small-medium commercial and industrial customer, and $82,000 for large commercial and industrial customer. Future work to improve the quality and coverage of information on the value of electricity reliability to customers is described.

Lawton, Leora; Sullivan, Michael; Van Liere, Kent; Katz, Aaron; Eto, Joseph

2003-11-01T23:59:59.000Z

457

TY CONF T1 Automated Price and Demand Response Demonstration for Large Customers  

NLE Websites -- All DOE Office Websites (Extended Search)

Automated Price and Demand Response Demonstration for Large Customers Automated Price and Demand Response Demonstration for Large Customers in New York City using OpenADR T2 International Conference for Enhanced Building Operations ICEBO A1 Joyce Jihyun Kim A1 Rongxin Yin A1 Sila Kiliccote AB p class p1 Open Automated Demand Response OpenADR an XML based information exchange model is used to facilitate continuous price responsive operation and demand response participation for large commercial buildings in New York who are subject to the default day ahead hourly pricing We summarize the existing demand response programs in New York and discuss OpenADR communication prioritization of demand response signals and control methods Building energy simulation models are developed and field tests are conducted to evaluate continuous energy management

458

Customer Choice and Green Power Marketing: A Critical Review and Analysis of Experience to Date  

NLE Websites -- All DOE Office Websites (Extended Search)

Customer Customer Choice and Green Power Marketing: A Critical Review and Analysis of Experience to Date Ryan Wiser, Lawrence Berkeley National Laboratory Mark Bolinger, Lawrence Berkeley National Laboratory Edward Holt, Ed Holt & Associates, Inc. ABSTRACT This article explores whether and to what extent individuals are willing to voluntarily pay a premium for products that provide public environmental benefits. In particular, we critically review and analyze the status and impacts of U.S. green power marketing to date. Green power marketing-the business of selling electricity products distinguished by their environmental attributes-seeks to develop a private market for renewable energy driven by consumer demand for green products. Debate has centered on the ability of such a market to provide a significant level of support for renewable energy sources. This paper examines

459

Customer Feedback during Development of 1998 MECS: Mail/Electronic Survey  

U.S. Energy Information Administration (EIA) Indexed Site

1998 MECS User Needs 1998 MECS User Needs Mail/Electronic Survey Results A mail/electronic survey was conducted as part of the process to collect information on the data needs of MECS customers. The collection time frame was May 1 through July 31, 1998. The survey portion has been completed, and the total results are now available. During this three-month period, the electronic user-needs survey received about 207 hits. Yet, only 15 of those hits resulted in the transmission of a completed survey. Exactly 239 surveys were mailed to customers on the mailing list of the MECS publication. A total of 50 completed surveys (21% response rate) were returned, 32 of which resulted from a follow-up mail request. Only two surveys were returned by the 11 trade associations that were identified as MECS users. Where appropriate, the replies of those two TRADE

460

Presentation to the EAC - Smart Grid Customer Acceptance Paper Outline - Wanda Reder  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Customer Acceptance Customer Acceptance Paper Outline Electricity Advisory Committee October 16,2012 ∗ Wanda Reder ∗ Susan Kelly ∗ Bob Curry ∗ Phyllis Reha ∗ Elliot Roseman ∗ Paula Klein Thanks To ∗ In Smart Grid Committee, Conclusion That Issues & Challenges Associated With Consumer Acceptance Required More Detailed Discussion ∗ Reaching This Conclusion Close To October EAC Meeting Resulted In A Detailed Outline Of A Paper Being Achievable Why Separate Paper On Consumer Acceptance & Why An Outline? ∗ Brief Discussion Of Detailed Outline & Draft Recommendations To Guide Developing A Full Paper For EAC Review ∗ Comments Can Be Submitted Over The Next Two Weeks ∗ Develop An Approach & Schedule To Develop Full Paper For EAC Review

Note: This page contains sample records for the topic "ole potential customers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Valuing Energy Security: Customer Damage Function Methodology and Case Studies at DoD Installations  

NLE Websites -- All DOE Office Websites (Extended Search)

Valuing Energy Security: Valuing Energy Security: Customer Damage Function Methodology and Case Studies at DoD Installations J. Giraldez, S. Booth, K. Anderson, and K. Massey Produced under direction of the Department of Defense by the National Renewable Energy Laboratory (NREL) under Interagency Agreement IAG 10-1788 and Task No WFH9.1009. Technical Report NREL/ TP-7A30-55913 October 2012 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. National Renewable Energy Laboratory 15013 Denver West Parkway Golden, Colorado 80401 303-275-3000 * www.nrel.gov Contract No. DE-AC36-08GO28308 Valuing Energy Security: Customer Damage Function

462

CLASSIFY-Profiles: Volume 4: Designing Energy Services for Commercial and Industrial Customers  

Science Conference Proceedings (OSTI)

In a changing marketplace, utilities will likely need to enhance their revenue streams through the introduction of nontraditional products and services in areas such as power quality, facilities management, energy management, and utility information. This report defines basic information about customer preferences to help utilities develop attractive, profitable, new services for larger commercial and industrial markets. This report is available only to funders of Program 101A or 101.001. Funders may dow...

1996-03-22T23:59:59.000Z

463

NEBRASKA PUBLIC POWER DISTRICT: CUSTOMER MEETING ON ENERGY ALTERNATIVES - SUMMARY OF RESULTS  

NLE Websites -- All DOE Office Websites (Extended Search)

NEBRASKA PUBLIC POWER DISTRICT NEBRASKA PUBLIC POWER DISTRICT CUSTOMER MEETING ON ENERGY ALTERNATIVES SUMMARY OF RESULTS August 19, 2003 Prepared by: The Public Decision Partnership: Will Guild, Ph.D. Ron Lehr Dennis Thomas, Ph.D. i Table of Contents Executive Summary ...........................................................................................................1 Summary of the Process....................................................................................................5 Contact persons ..................................................................................................................8 Response to Proposed Projects .........................................................................................9 Do you think NPPD should go forward with a 200 megawatt wind farm?

464

Power Quality for Satisfied Commercial and Residential Customers Field Test Plan: Monitoring Residential Power Quality  

Science Conference Proceedings (OSTI)

Residential customers are purchasing more and more microprocessor-based appliances. Many of the traditional residential loads, such as heating and air-conditioning equipment, washers and dryers, stoves and cook tops, and audio/video equipment, now have microprocessor technology incorporated into their designs. These appliances tend to be more sensitive than their predecessors, and it is of interest to understand the level of power quality that is experienced at the residential level. EPRI's three-year st...

2000-11-28T23:59:59.000Z

465

A Case Study on Remote Dispatch of Customer-Owned Resources:Consolidated Edison  

Science Conference Proceedings (OSTI)

This case study from the Consolidated Edison Smart Grid Demonstration Initiative addresses the implementa­tion of a key component of a “virtual power plant,” an automated demand response (AutoDR) application for the remote dispatch of distributed customer-owned resources.The Consolidated Edison demonstration is focused on develop­ing the technology necessary to integrate distributed resources into the utility’s distribution system and distribution control ...

2012-10-31T23:59:59.000Z

466

Supply Side Management Kit: Service for Energy Suppliers and Process Industry Customers  

Science Conference Proceedings (OSTI)

The Supply Side Management Kit highlights proposed EPRI's services for energy suppliers and process industries in the supply side area. With the onset of electricity deregulation, process industry customers are increasingly looking at reducing energy costs on the supply of energy. The new environment has created significant opportunities for cost-effective purchase, management, generation, utilization, and sale of energy for process industries. This kit discusses the services offered by EPRI to meet its ...

1999-10-28T23:59:59.000Z

467

Commonwealth Edison Company Customer Applications Program - Objectives, Research Design, and Implementation Details  

Science Conference Proceedings (OSTI)

Commonwealth Edison Company (ComEd) launched an ambitious and comprehensive pilot program designed to resolve uncertainties about how advanced metering infrastructure (AMI) technology can be used to stimulate changes in residential electricity consumption. The study was launched in response to the Illinois Commerce Commission order in Docket 07-0566. Industry determination of the value of AMI technology is incomplete because customer impacts have been determined from pilots and experiments that involved ...

2011-01-27T23:59:59.000Z

468

Roadmap for Power Quality Mitigation Technology Demonstration Projects at Commercial Customer Sites  

Science Conference Proceedings (OSTI)

Power quality has emerged as an important issue for the commercial customer segment. Historically, power quality issues have been the domain of electric utilities, which focused on reducing or eliminating power outages. However, the recent proliferation in office use of electronic equipment and microprocessor-based controls has caused electric utilities to redefine power quality in terms of the quality of voltage supply rather than availability of power. This document provides a screening tool for utilit...

1999-12-09T23:59:59.000Z

469

Impact of SEMI F47 on Utilities and Their Customers: Abridged Version  

Science Conference Proceedings (OSTI)

Industrial and commercial end users commonly upgrade their process equipment every few years. EPRI customers can help these end users avoid costly power quality problems by insisting on proper system compatibility specifications during the equipment bidding and procurement stages. EPRI funders were instrumental in the successful effort to develop equipment immunity standards, such as SEMI F47, which has benefited the semiconductor industry and the electric utilities serving these end users. This abridged...

2004-12-07T23:59:59.000Z

470

Price Determination of Electricity in a Competitive Environment: Reaching Profitable Electricity Customers with Market Power  

Science Conference Proceedings (OSTI)

This report studies and develops techniques for profitable generation company operation in the competitive /deregulated environment. Specifically it investigates how market power can be used to reach the high-profit segment of the customer-base. The first part of the report is primarily concerned with methods and theory. The competitive market framework assumed for this research is presented. The basic auctions used, and the optimization techniques used to implement them, are explained. Extensions to the...

2000-06-08T23:59:59.000Z

471

List of ERDA radioisotope (customers with summary of radioisotope shipments FY 1975  

SciTech Connect

The twelfth edition of the ERDA radioisotope customer list has been prepared at the request of the Division of Biomedical and Environmental Research. The purpose of this document is to list the FY 1975 commercial radioisotope production and distribution activities of USERDA facilities at Argonne National Laboratory, Battelle, Pacific Northwest Laboratories, Brookhaven National Laboratory, United Nuclear Inc., Idaho Operations Office, Hanford Engineering Development Laboratory, Mound Laboratory, Oak Ridge National Laboratory, and Savannah River Plant. (TFD)

Simmons, J.L.; Gano, S.R. (comp.)

1976-01-01T23:59:59.000Z

472

Customer Response to Electricity Prices: Information to Support Wholesale Price Forecasting and Market Analysis  

Science Conference Proceedings (OSTI)

Understanding customer response to electricity price changes is critical to profitably managing a retail business, designing efficient wholesale power markets, and forecasting power prices for valuation of long-lived generating assets. This report packages the collective results of dozens of price response studies for use by forward price forecasters and power market analysts in forecasting loads, revenues, and the benefits of time-varying prices more accurately. In specific, the report describes key mea...

2001-11-30T23:59:59.000Z

473

Customer interface document for the Molten Salt Test Loop (MSTL) system.  

DOE Green Energy (OSTI)

The National Solar Thermal Test Facility at Sandia National Laboratories has a unique test capability called the Molten Salt Test Loop (MSTL) system. MSTL is a test capability that allows customers and researchers to test components in flowing, molten nitrate salt. The components tested can range from materials samples, to individual components such as flex hoses, ball joints, and valves, up to full solar collecting systems such as central receiver panels, parabolic troughs, or linear Fresnel systems. MSTL provides realistic conditions similar to a portion of a concentrating solar power facility. The facility currently uses 60/40 nitrate 'solar salt' and can circulate the salt at pressure up to 600psi, temperature to 585 C, and flow rate of 400-600GPM depending on temperature. The purpose of this document is to provide a basis for customers to evaluate the applicability to their testing needs, and to provide an outline of expectations for conducting testing on MSTL. The document can serve as the basis for testing agreements including Work for Others (WFO) and Cooperative Research and Development Agreements (CRADA). While this document provides the basis for these agreements and describes some of the requirements for testing using MSTL and on the site at Sandia, the document is not sufficient by itself as a test agreement. The document, however, does provide customers with a uniform set of information to begin the test planning process.

Pettit, Kathleen; Kolb, William J.; Gill, David Dennis; Briggs, Ronald D.

2012-03-01T23:59:59.000Z

474

The Impact of Retail Rate Structures on the Economics of Customer-Sited PV: A Study of Commercial Installations in California  

E-Print Network (OSTI)

offered to customers with peak demands greater than 100 kW,are based on annual peak demand. Using similar reasoning,when based on monthly peak demand, for customer with a

Wiser, Ryan; Mills, Andrew; Barbose, Galen; Golove, William

2008-01-01T23:59:59.000Z

475

Busy period, time of the first loss of a customer and the number of customers in $ M^{\\varkappa}|G^{\\delta}|1|B$  

E-Print Network (OSTI)

A two-sided exit problem is solved for a difference of a compound Poisson process and a compound renewal process. More precisely, the Laplace transforms of the joint distribution of the first exit time, the value of the overshoot and the value of a linear component at this instant are found. Further, we study the process reflected in its supremum. We determine the main two-boundary characteristics of the process reflected in its supremum. These results are then applied for studying the $ M^{\\varkappa}|G^{\\delta}|1|B$ system. We derive the distribution of a busy period and the numbers of customers in the system in transient and stationary regimes. The advantage is that these results are in a closed form, in terms of resolvent sequences of the process.

Kadankova, Tetyana; Veraverbeke, Noel

2011-01-01T23:59:59.000Z

476

The Impact of Retail Rate Structures on the Economics of Customer-Sited PV: A Study of Commercial Installations in California  

E-Print Network (OSTI)

the PV production profile, increases with the price ratio.off-peak prices. Customers who plan to install PV systems (

Wiser, Ryan; Mills, Andrew; Barbose, Galen; Golove, William

2008-01-01T23:59:59.000Z

477

Analysis of Auto Industry and Consumer Response to Regulations and Technological Change, and Customization of Consumer Response Models in Support of AB 1493 Rulemaking  

E-Print Network (OSTI)

number of options available, “decontent” vehicles, and offer longer term financing to customers. In a broader sense, companies

2004-01-01T23:59:59.000Z

478

Customization of RegCM3 Regional Climate Model for Eastern Africa and a Tropical Indian Ocean Domain  

Science Conference Proceedings (OSTI)

Rainfall is a driving factor of climate in the tropics and needs to be properly represented within a climate model. This study customizes the precipitation processes over the tropical regions of eastern Africa and the Indian Ocean using the ...

Neil Davis; Jared Bowden; Fredrick Semazzi; Lian Xie; Bari? Önol

2009-07-01T23:59:59.000Z

479

Customer reponse to day-ahead wholesale market electricity prices: Case study of RTP program experience in New York  

E-Print Network (OSTI)

Response to Electricity Real-Time Prices: Short Run and LongElectricity Usage to Real Time Prices A-31 v List ofwere linked to real-time prices, most customers indicated

2004-01-01T23:59:59.000Z

480

Design and performance evaluation of an electric go-kart and custom permanent magnet brushless DC motor  

E-Print Network (OSTI)

This undergraduate thesis documents the design considerations and specifications of building a personal battery-powered go-kart. This includes designing and building a custom brushless DC motor for use in the drivetrain. ...

Davis, Eli Marc

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ole potential customers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Customer response to day-ahead wholesale market electricity prices: Case study of RTP program experience in New York  

Science Conference Proceedings (OSTI)

There is growing interest in policies, programs and tariffs that encourage customer loads to provide demand response (DR) to help discipline wholesale electricity markets. Proposals at the retail level range from eliminating fixed rate tariffs as the default service for some or all customer groups to reinstituting utility-sponsored load management programs with market-based inducements to curtail. Alternative rate designs include time-of-use (TOU), day-ahead real-time pricing (RTP), critical peak pricing, and even pricing usage at real-time market balancing prices. Some Independent System Operators (ISOs) have implemented their own DR programs whereby load curtailment capabilities are treated as a system resource and are paid an equivalent value. The resulting load reductions from these tariffs and programs provide a variety of benefits, including limiting the ability of suppliers to increase spot and long-term market-clearing prices above competitive levels (Neenan et al., 2002; Boren stein, 2002; Ruff, 2002). Unfortunately, there is little information in the public domain to characterize and quantify how customers actually respond to these alternative dynamic pricing schemes. A few empirical studies of large customer RTP response have shown modest results for most customers, with a few very price-responsive customers providing most of the aggregate response (Herriges et al., 1993; Schwarz et al., 2002). However, these studies examined response to voluntary, two-part RTP programs implemented by utilities in states without retail competition.1 Furthermore, the researchers had limited information on customer characteristics so they were unable to identify the drivers to price response. In the absence of a compelling characterization of why customers join RTP programs and how they respond to prices, many initiatives to modernize retail electricity rates seem to be stymied.

Goldman, C.; Hopper, N.; Sezgen, O.; Moezzi, M.; Bharvirkar, R.; Neenan, B.; Boisvert, R.; Cappers, P.; Pratt, D.

2004-07-01T23:59:59.000Z

482

The Chiller's Role within a Utility's Marketing Strategy: UsingChiller-Related Products and Services to Win and Retain Customers  

Science Conference Proceedings (OSTI)

Commercial chillers, used in space and industrial process cooling, can comprise as much as 30% of a large office building's electrical load. The selection decisions for a new or replacement chiller (electric versus gas, standard versus high efficiency, thermal storage versus standard cooling) will affect the customer's energy consumption for 20-30 years. This study evaluates specific chiller marketing tactics based on customer needs as well as energy service strategies that take advantage of changes in m...

1998-04-27T23:59:59.000Z

483

Ultrabright fluorescent OLEDS using triplet sinks  

DOE Patents (OSTI)

A first device is provided. The first device further comprises an organic light emitting device. The organic light emitting device further comprises an anode, a cathode, and an emissive layer disposed between the anode and the cathode. The emissive layer further comprises an organic host compound, an organic emitting compound capable of fluorescent emission at room temperature, and an organic dopant compound. The triplet energy of the dopant compound is lower than the triplet energy of the host compound. The dopant compound does not strongly absorb the fluorescent emission of the emitting compound.

Zhang, Yifan; Forrest, Stephen R; Thompson, Mark

2013-06-04T23:59:59.000Z

484

Organic Photovoltaics and OLEDs - Programmaster.org  

Science Conference Proceedings (OSTI)

Sep 16, 2009... energy escalates, renewable energy resources such as solar power become viable commercial options provided solar power's levelized cost ...

485

ULTRABRIGHT FLUORESCENT OLEDS USING TRIPLET SINKS - Energy ...  

Solar Photovoltaic; Solar Thermal; Startup America; Vehicles and Fuels; ... The University of Southern California (Los Angeles CA), The Regents of the University of ...

486

Lighting Group: Sources and Ballasts: OLED's  

NLE Websites -- All DOE Office Websites (Extended Search)

Information For more information on this project, please contact: Steve Johnson Lighting Group Leader (510) 486-4274 SGJohnson@lbl.gov Sponsor Information This project is...

487

OLED Deposition Technology - Energy Innovation Portal  

Hydrogen and Fuel Cell; Hydropower, Wave ... The method involves injecting a mixture of a non-polymeric organic compound with a fluid carrier into a “ ...

488

Integrated fuses for OLED lighting device  

DOE Patents (OSTI)

An embodiment of the present invention pertains to an electroluminescent lighting device for area illumination. The lighting device is fault tolerant due, in part, to the patterning of one or both of the electrodes into strips, and each of one or more of these strips has a fuse formed on it. The fuses are integrated on the substrate. By using the integrated fuses, the number of external contacts that are used is minimized. The fuse material is deposited using one of the deposition techniques that is used to deposit the thin layers of the electroluminescent lighting device.

Pschenitzka, Florian (San Jose, CA)

2007-07-10T23:59:59.000Z

489

DCal: A custom integrated circuit for calorimetry at the International Linear Collider  

SciTech Connect

A research and development collaboration has been started with the goal of producing a prototype hadron calorimeter section for the purpose of proving the Particle Flow Algorithm concept for the International Linear Collider. Given the unique requirements of a Particle Flow Algorithm calorimeter, custom readout electronics must be developed to service these detectors. This paper introduces the DCal or Digital Calorimetry Chip, a custom integrated circuit developed in a 0.25um CMOS process specifically for this International Linear Collider project. The DCal is capable of handling 64 channels, producing a 1-bit Digital-to-Analog conversion of the input (i.e. hit/no hit). It maintains a 24-bit timestamp and is capable of operating either in an externally triggered mode or in a self-triggered mode. Moreover, it is capable of operating either with or without a pipeline delay. Finally, in order to permit the testing of different calorimeter technologies, its analog front end is capable of servicing Particle Flow Algorithm calorimeters made from either Resistive Plate Chambers or Gaseous Electron Multipliers.

Hoff, James R.; Mekkaoui, Abderrazek; Yarema, Ray; /Fermilab; Drake, Gary; Repond, Jose; /Argonne

2005-10-01T23:59:59.000Z

490

Assessment of the Geothermal Potential Within the BPA Marketing Area.  

DOE Green Energy (OSTI)

The potential of geothermal energy is estimated that can be used for direct heat applications and electrical power generation within the Bonneville Power Administration (BPA) marketing area. The BPA marketing area includes three principal states of Oregon, Washington, and Idaho and portions of California, Montana, Wyoming, Nevada, and Utah bordering on these three states. This area covers approximately 384,000 square miles and has an estimated population of 6,760,000. The total electrical geothermal potential within this marketing area is 4077 MW/sub e/ from hydrothermal resources and 16,000 MW/sub e/ from igneous systems, whereas the total thermal (wellhead) potential is 16.15 x 10/sup 15/ Btu/y. Approximately 200 geothermal resource sites were initially identified within the BPA marketing area. This number was then reduced to about 100 sites thought to be the most promising for development by the year 2000. These 100 sites, due to load area overlap, were grouped into 53 composite sites; 21-3/4 within BPA preference customer areas and 31-1/4 within nonpreference customer areas. The geothermal resource potential was then estimated for high-temperature (> 302/sup 0/F = 150/sup 0/C), intermediate-temperature (194 to 302/sup 0/F = 90 to 150/sup 0/C), and low-temperature (< 194/sup 0/F = 90/sup 0/C) resources.

Lund, John W.; Allen, Eliot D.

1980-07-01T23:59:59.000Z

491

LBNL-5803E The Future of Utility Customer- Funded Energy Efficiency Programs  

NLE Websites -- All DOE Office Websites (Extended Search)

803E 803E The Future of Utility Customer- Funded Energy Efficiency Programs in the United States: Projected Spending and Savings to 2025 Galen L. Barbose, Charles A. Goldman, Ian M. Hoffman, Megan Billingsley Environmental Energy Technologies Division January 2013 This work was supported by the National Electricity Delivery Division of the U.S. Department of Energy's Office of Electricity Delivery and Energy Reliability under Lawrence Berkeley National Laboratory Contract No. DE-AC02-05CH11231. ERNEST ORLANDO LAWRENCE BERKELEY NATIONAL LABORATORY Disclaimer This document was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither the United States Government nor any agency thereof, nor The Regents of the

492

DOE Challenge Home Case Study, e2Homes, Winterpark, FL, Custom Homes  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

fi fi rst certifi ed DOE Challenge Home in the United States-the Wilson Residence in Winter Park, Florida-produces more energy than it uses with construction costs one-third less than originally proposed. Completed in May 2012, this 4,305-ft 2 custom home (with four bedrooms and baths) screams "BIG" until you hear the "small footprint" in the energy- and water-effi ciency details. Without solar power, the home scores a HERS 57, which is well below the HERS 100 for a standard home built to code. With its photovoltaic system, the home produces better than zero net-energy performance, with a score of HERS -7. This translates into no electric utility bills and even $123 annually in the homeowner's pocket from the utility. When the homeowner, Mr. Wilson, hired e2 Homes to build his dream home, he